AIAA/NASA International Symposium on Space Information Systems, 2nd, Pasadena, CA, Sept. 17-19, 1990, Proceedings. Vols. 1 & 2

NASA Technical Reports Server (NTRS)

Tavenner, Leslie A. (Editor)

1991-01-01

These proceedings overview major space information system projects and lessons learned from current missions. Other topics include the science information system requirements for the 1990s, an information systems design approach for major programs, the technology needs and projections, the standards for space data information systems, the artificial intelligence technology and applications, international interoperability, and spacecraft data systems and architectures advanced communications. Other topics include the software engineering technology and applications, the multimission multidiscipline information system architectures, the distributed planning and scheduling systems and operations, and the computer and information systems architectures. Paper presented include prospects for scientific data analysis systems for solar-terrestrial physics in the 1990s, the Columbus data management system, data storage technologies for the future, the German aerospace research establishment, and launching artificial intelligence in NASA ground systems.

Advanced Optical Technologies for Defense Trauma and Critical Care

DTIC Science & Technology

2014-02-04

conventional LSI. We also demonstrated that mcLSI enables improved characterization of curved surfaces of the body by positioning LSI modules at...Implementation of an LED based clinical spatial frequency domain imaging 17 system. Proc SPIE Vol. 8254, Emerging Digital Micromirror Device Based

Overview of Lockheed Martin cryocoolers

NASA Astrophysics Data System (ADS)

Nast, T.; Olson, J.; Champagne, P.; Evtimov, B.; Frank, D.; Roth, E.; Renna, T.

2006-02-01

Lockheed Martin's Advanced Technology Center (LM-ATC) in Palo Alto, California, has been active in space cryogenic developments for over 30 years. In prior years, work focused on stored cryogen systems for temperatures up to 125 K. As the mechanical cryocoolers matured and demonstrated reliable operation these stored cryogen systems gradually became replaced. LM-ATC is currently developing solid hydrogen systems for temperatures below 7 K [Naes L, Wu S, Cannon J. WISE solid hydrogen cryostat design overview. In: Proceedings of SPIE, cryogenic optical systems and instruments XI, vol. 5904, August, 2005], but these coolers will soon be replaced by mechanical cryocoolers. This paper will present a summary of cryocooler developments at LM-ATC and will describe the recent performance of multiple stage systems. A four-stage pulse tube cryocooler developed under contract to the Jet Propulsion Laboratory (JPL) has been recently developed and operated at 3.8 K [Olson JR, Moore M, Champagne P, Roth E, Evtimov B, Jensen J, et al. Development of a space-type-4-stage pulse tube cryocooler for very low temperatures, Adv Cryogen Engr, vol. 50, Amer Inst of Physics, New York, in press]. Coolers with one, two and three stages have also been widely developed [Nast TC et al. Miniature pulse tube cryocooler for space applications. Cryocoolers, vol. 11. New York: Plenum Press; 2000. p. 145-54; Olson J et al. Development of a 10 K pulse tube cryocooler for space applications. In: Ross R, editor. Cryocoolers, vol. 12. New York: Kluwer Academic/Plenum Publishers; 2003. p. 241-6; Nast TC et al. Lockheed Martin two-stage pulse tube cryocooler for GIFTS. Cryocoolers, vol. 13. New York: Kluwer Academic/Plenum Publishers; 2005; Frank D et al. Lockheed Martin RAMOS engineering model cryocooler. Cryocoolers, vol. 13. New York: Kluwer Academic/Plenum Publishers; 2005]. A staging approach is required to achieve very low temperatures, and also provides cooling at warmer temperatures, which is invariably beneficial in reducing heat loads to the lower temperature stages, or for cooling other system components. For example, our two-stage cooler [Nast TC et al. Lockheed Martin two-stage pulse tube cryocooler for GIFTS. Cryocoolers, vol. 13. New York: Kluwer Academic/Plenum Publishers; 2005; Frank D et al. Lockheed Martin RAMOS engineering model cryocooler. Cryocoolers, vol. 13. New York: Kluwer Academic/Plenum Publishers; 2005] is used to cool a low-temperature focal plane as well as a higher temperature optical sensor, using a single compressor and electronics at a substantial benefit in weight, reliability and cost.

Inactivation of Biological Agents Using Neutral Oxone-Chloride Solutions

DTIC Science & Technology

2006-01-31

33.50  2006 American Chemical Society VOL. 40, NO. 8, 2006 / ENVIRONMENTAL SCIENCE & TECHNOLOGY 9 2759 Published on Web 03/15/2006 Standard Form 298...Approved for public release; distribution unlimited. Published in Environmental Science and Technology, Vol 40, No 8, pp 2759-2764. AFRL/MLQ Public Affairs...Inactivation Studies. Greater than 8-log inactiva- tion of E. coli was obtained within 30 s upon exposure to 2760 9 ENVIRONMENTAL SCIENCE & TECHNOLOGY

An Exploratory Analysis of the Relationship between Media Richness and Managerial Information Processing

DTIC Science & Technology

1984-07-01

engineers use technology to design optimal information systems that will provide clear, correct data to help managers solve current problems (Keen...is in a changing environment (Hedberg and Jonsson, 1978; Mowshowitz, 1976; Hedberg, 1981; Hedberg, Nystrom, and Starbuck , 1976). Technology based...organizations learn and unlearn." In P. C. Nystrom, and W. H. Starbuck (eds.), Handbook of Organizational Design, Vol. 1. Amsterdam: Elsevier Scientific

Quantitative Technology Assessment (QTA). Delivery Order 0007: Vehicle Design Technology Developments for Uninhabited Aerial Systems (UAS)

DTIC Science & Technology

2015-02-01

as the UDRI Principal Investigator with assistance provided by Dr. Geoffrey Frank. Financial support by Dr. Les Lee at the Air Force Office of... polypropylene composites with some success however require sophisticated manufacturing techniques. Nickel powders have been used similarly to the...of Composites of Isotactic Polypropylene Reinforced with Electrically Conductive Fibers," Polymer Composites, vol. 18, no. 6, 1997. [35] J. Leng

Interference Analysis for Highly Directional 60 GHz Mesh Networks: The Case for Rethinking Medium Access Control

DTIC Science & Technology

2010-11-24

Helmken, “Performance analysis of coherent DS - CDMA systems in a Nakagami fading channel with arbitrary parameters,” Vehicular Technology, IEEE...Transactions on, vol. 46, no. 2, pp. 289–297, may 1997. [26] M. Sunay and P. McLane, “Calculating error probabilities for DS - CDMA systems: when not to use

System. A Newsletter for Educational Technology and Language Learning Systems. Vol. 2, No. 3.

ERIC Educational Resources Information Center

Davies, Norman F., Ed.; Allen, John R., Ed.

This issue begins with an editorial comment on the journal's areas of interest. The articles are concerned with the following topics: (1) English composition and the use of the computer (Peter Zoller); (2) the teacher and the language laboratory (L. Ross and B. D. Sadler); (3) language aptitude tests in the language laboratory (in German, Peter…

Chinese-English Electronics and Telecommunications Dictionary, Vol. 2.

ERIC Educational Resources Information Center

Air Force Systems Command, Wright-Patterson AFB, OH. Foreign Technology Div.

This is the second volume of the Electronics and Telecommunications Dictionary, the third of the series of Chinese-English technical dictionaries under preparation by the Foreign Technology Division, United States Air Force Systems Command. The purpose of the series is to provide rapid reference tools for translators, abstracters, and research…

Chinese-English Electronics and Telecommunications Dictionary. Vol. 1.

ERIC Educational Resources Information Center

Air Force Systems Command, Wright-Patterson AFB, OH. Foreign Technology Div.

This is the first volume of the Electronics and Telecommunications Dictionary, the third of the series of Chinese-English technical dictionaries under preparation by the Foreign Technology Division, United States Air Force Systems Command. The purpose of the series is to provide rapid reference tools for translators, abstracters, and research…

Information-computational system for storage, search and analytical processing of environmental datasets based on the Semantic Web technologies

NASA Astrophysics Data System (ADS)

Titov, A.; Gordov, E.; Okladnikov, I.

2009-04-01

In this report the results of the work devoted to the development of working model of the software system for storage, semantically-enabled search and retrieval along with processing and visualization of environmental datasets containing results of meteorological and air pollution observations and mathematical climate modeling are presented. Specially designed metadata standard for machine-readable description of datasets related to meteorology, climate and atmospheric pollution transport domains is introduced as one of the key system components. To provide semantic interoperability the Resource Description Framework (RDF, http://www.w3.org/RDF/) technology means have been chosen for metadata description model realization in the form of RDF Schema. The final version of the RDF Schema is implemented on the base of widely used standards, such as Dublin Core Metadata Element Set (http://dublincore.org/), Directory Interchange Format (DIF, http://gcmd.gsfc.nasa.gov/User/difguide/difman.html), ISO 19139, etc. At present the system is available as a Web server (http://climate.risks.scert.ru/metadatabase/) based on the web-portal ATMOS engine [1] and is implementing dataset management functionality including SeRQL-based semantic search as well as statistical analysis and visualization of selected data archives [2,3]. The core of the system is Apache web server in conjunction with Tomcat Java Servlet Container (http://jakarta.apache.org/tomcat/) and Sesame Server (http://www.openrdf.org/) used as a database for RDF and RDF Schema. At present statistical analysis of meteorological and climatic data with subsequent visualization of results is implemented for such datasets as NCEP/NCAR Reanalysis, Reanalysis NCEP/DOE AMIP II, JMA/CRIEPI JRA-25, ECMWF ERA-40 and local measurements obtained from meteorological stations on the territory of Russia. This functionality is aimed primarily at finding of main characteristics of regional climate dynamics. The proposed system represents a step in the process of development of a distributed collaborative information-computational environment to support multidisciplinary investigations of Earth regional environment [4]. Partial support of this work by SB RAS Integration Project 34, SB RAS Basic Program Project 4.5.2.2, APN Project CBA2007-08NSY and FP6 Enviro-RISKS project (INCO-CT-2004-013427) is acknowledged. References 1. E.P. Gordov, V.N. Lykosov, and A.Z. Fazliev. Web portal on environmental sciences "ATMOS" // Advances in Geosciences. 2006. Vol. 8. p. 33 - 38. 2. Gordov E.P., Okladnikov I.G., Titov A.G. Development of elements of web based information-computational system supporting regional environment processes investigations // Journal of Computational Technologies, Vol. 12, Special Issue #3, 2007, pp. 20 - 28. 3. Okladnikov I.G., Titov A.G. Melnikova V.N., Shulgina T.M. Web-system for processing and visualization of meteorological and climatic data // Journal of Computational Technologies, Vol. 13, Special Issue #3, 2008, pp. 64 - 69. 4. Gordov E.P., Lykosov V.N. Development of information-computational infrastructure for integrated study of Siberia environment // Journal of Computational Technologies, Vol. 12, Special Issue #2, 2007, pp. 19 - 30.

Gradient Index (GRIN) Lens Multimode Fiber Probe for Laser Induced Breakdown in the Eye

DTIC Science & Technology

1994-01-23

34 Applied Optics, VoL 22, No. 3, p. 383, 1983 SPIE Vol. 2126 Ophthalmic Technologies IV (1994) /303 3. M. M. Pankratov , 0. Pomerantzeff, K. P...R. D. Jones, ’Laser-Produced Plasmas in Medicine," IEEE Transactions on Plasma Science, Vol. 19, p. 1209, 1991 6. T. I. Margolis, D. A. Farnath, M...Ophthalmology, Vol. 109, p.1605, 1991 8. P. Rol, P. Niederer, F. Fankhauser, M. Arigoni, E. De HaIler, ’p-Switched pulses and optical breakdown

Research in space commercialization, technology transfer and communications, vol. 2

NASA Technical Reports Server (NTRS)

Dunn, D. A.; Agnew, C. E.

1983-01-01

Spectrum management, models for evaluating communications systems, and implications of communications regulations for NASA are considered as major parts of communications policy. Marketing LANDSAT products in developing countries, a political systems analysis of LANDSAT, and private financing and operation of the space operations center (space station) are discussed. Investment requirements, risks, government support, and other primary business and management considerations are examined.

Basic EMC Technology Advancement for C3 Systems - Model Revision for IEMCAP. Volume 5

DTIC Science & Technology

1984-10-01

important asset. 126 REFERENCES [1] J. L. Bogdanor , et. al., Inttasystem Electromagnetic Compatibility Analy- sis Program, Technical Report, RADC-TR-74...Method of Moments, Technical Report, RADC-TR-82-286, Vol. IV A, Rome Air Development Center, Griffiss AFB, NY, November 1982. [30] J. B. Bogdanor , M. D

Robust Model-Based Fault Diagnosis for DC Zonal Electrical Distribution System

DTIC Science & Technology

2007-06-01

Conf. on Decision and Control, 1979, 149 [24] P. Balle, D. Juricic, A. Rakar and S. Ernst , "Identification of nonlinear processes and model based...Technology, IEEE Transactions on, vol. 12, pp. 183-192, 2004. [232] H. G. Kwatny, E. Mensah, D. Niebur and C. Teolis, "Optimal shipboard power

Y-12 Plant decontamination and decommissioning technology logic diagram for Building 9201-4. Volume 2: Technology logic diagram

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-09-01

The Y-12 Plant Decontamination and Decommissioning Technology Logic Diagram for Building 9201-4 (TLD) was developed to provide a decision-support tool that relates decontamination and decommissioning (D and D) problems at Bldg. 9201-4 to potential technologies that can remediate these problems. This TLD identifies the research, development, demonstration, testing, and evaluation needed for sufficient development of these technologies to allow for technology transfer and application to D and D and waste management (WM) activities. It is essential that follow-on engineering studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologiesmore » identified in the TLD and by finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk. The TLD consists of three fundamentally separate volumes: Vol. 1 (Technology Evaluation), Vol. 2 (Technology Logic Diagram), and Vol. 3 (Technology Evaluation Data Sheets). Volume 2 contains the logic linkages among environmental management goals, environmental problems, and the various technologies that have the potential to solve these problems. Volume 2 has been divided into five sections: Characterization, Decontamination, Dismantlement, Robotics/Automation, and Waste Management. Each section contains logical breakdowns of the Y-12 D and D problems by subject area and identifies technologies that can be reasonably applied to each D and D challenge.« less

Precision Positioning and Inertial Guidance Sensors. Technology and Operational Aspects

DTIC Science & Technology

1981-03-01

Ueberlingen, GE EVALUATION D’UN SYSTEME EUROPEEN DE NAVIGATION HYBRIDE A - - GYROLASER POUR HELICOPTERE: "SEXTAN" by D Regnault, Centre d’Essais en Vol de...NAVIGATION SYSTEM AND STANDARD STATE ELEMENT DEVIATIONMEASUREMENT SOURCES( Dead-reckoning with position fxP fy 5000 En ]TAS, heading and wind scale...Reproduction Ltd ilarford House. 7-9 Charlotte St. London. WIP JIHD [i Ii THEME A new class of precision positioning systems , including GPS (Global

Optical Correction Of Space-Based Telescopes Using A Deformable Mirror System

DTIC Science & Technology

2016-12-01

FPA). A fast 5 steering mirror is used to move the FOV within the FOR so that the spacecraft does not need to physically move to a new target as...technology review and development roadmap,” Astro2010: The Astronomy and Astrophysics Decadal Survey, 2009, vol. 2010, p. 23. [8] D. Baiocchi, “Design and

JPRS Report, Science & Technology. China.

DTIC Science & Technology

1989-03-29

Commun ., Vol COM-29, No 6, pp 895-901, June 1981. [4] R.C. Titsworth , "A Boolean-Function-Multiplexed Telemetry System," IEEE Trans, on SET, pp 42...Reagents 39 Gene-Engineered Human Epithelium Growth Factor (hEGF) 39 Superfine Snake Venom 39 COMPUTERS Ai Computer System LISP-MI [Zheng Shouqi, et...XUEBAO, No 3, Jun 88] 134 Coordinated Development of Microwave, Optical Communications [Zhang Xu; DIANXIN KUAIBAO, No 11, Nov 88] 143 Error

A Proposal to Perform New Theoretical and Experimental Research on HumanEfficiency Through Developments Within Systems Factorial Technology (SFT)

DTIC Science & Technology

2017-05-26

Mathematical psychology. In APA Handbook of Research Methods in Psychology, Vol. 2: Research Designs: Quantitative , Qualitative, DISTRIBUTION A: Distribution...AFRL-AFOSR-VA-TR-2017-0108 A Proposal to Perform New Theoretical and Experimental Research on Human Efficiency Through Developments Within Systems...release. AF Office Of Scientific Research (AFOSR)/ RTA2 Arlington, Virginia 22203 Air Force Research Laboratory Air Force Materiel Command a. REPORT

Robust Multi-Agent Sensor Network Systems

DTIC Science & Technology

2012-05-08

Localization on the Sphere, International Journal of Intelligent Defence Support System, Vol. 4, no. 4, 2011, pp. 328-350. Quality of Network... Quality of Service (QoS). The following standards are included in the IEEE 1609 standard family: IEEE P1609.0, IEEE P1609.1, IEEE P1609.2, IEEE P1609.3...protocols to support safety services in ITS,” in IEEE International Conference on Emerging Technologies and Factory Au- tomation (ETFA), 2008, pp. 1189

USSR and Eastern Europe Scientific Abstracts, Cybernetics, Computers and Automation Technology, Number 36.

DTIC Science & Technology

1978-10-11

REQUIREMENTS OF COMPUTER USERS Warsaw INFORMATYKA in Polish Vol 12 No 8, 1977 pp 12-14 CHELCHOWSKI, JERZY, Academy of Economics, Wroclaw [Abstract...Western. 11 E. Hardware POLAND SQUARE-LOOP FERRITE CORES IN THE WORKING STORAGE OF MODERN COMPUTERS Warsaw INFORMATYKA in Polish Vol 12 No 5...INDUSTRY PLANT Warsaw INFORMATYKA in Polish Vol 12 No 10, 1977 Pp 20-22 BERNATOWICZ, KRYSTYN [Text] Next to mines, steelworks and shipyards, The H

JPRS Report, Science & Technology China

DTIC Science & Technology

1989-02-23

Protoplast Culture of Rice (Oryza sativa L.), Plant Regeneration From Protoplast-Derived Calli 40091011a Beijing YICHUAN XUEBAO [ACTA GENETICA ...YICHUAN XUEBAO [ACTA GENETICA SINICA] in Chinese Vol 15 No 5, Oct 88 pp 329-334 [English abstract of article by Tao Zirong [7118 5261 2837], et al...Chang, et al., ACTA GENETICA SINICA, Vol 7 No 3, 1980 pp 283-288. 7. Zhu Zhongchun, et al., ACTA GENETICA SINICA, Vol 8 No 1, 1981 pp 63-65, 8. Mix, G

Safety of high speed guided ground transportation systems. Magnetic and electric field testing of the French Train a Grande Vitesse (TGV) rail systems. Volume 1. Analysis. Final report, September 1992-March 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dietrich, F.M.; Papas, P.N.; Jacobs, W.L.

The safety of magnetically levitated (maglev) and high speed rail (HSR) trains proposed for application in the United States is the responsibility of the Federal Railroad Administration (FRA). A franchise has been awarded to the Texas high Speed Rail Corporation to operate a 200 mph French Train a Grande Vitesse (TGV) in the Texas Triangle (Dallas-Fort Worth, Houston, San Antonio), with construction to begin in 1995. The report provides the Analysis (Vol. I) of results, and detailed data and statistical summaries (Vol. II, Appendices) of representative electric and magnetic field (EMF) profiles on TGV-A trains between Paris and Tours formore » two electro-technologies (1.5 KV DC near Paris, and 2x25 KV at 50 Hz AC).« less

Safety of high speed guided ground transportation systems. Magnetic and electric field testing of the French Train a Grande Vitesse (TGV) rail systems. Volume 2. Appendices. Final report, September 1992-March 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dietrich, F.M.; Jacobs, W.E.

The safety of magnetically levitated (maglev) and high speed rail (HSR) trains proposed for application in the United States is the responsibility of the Federal Railroad Administration (FRA). A franchise has been awarded to the Texas High Speed Rail Corporation to operate a 200 mph French Train a Grande Vitesse (TGV) in the Texas Triangle (Dallas-Fort Worth, Houston, San Antonio), with construction to begin in 1995. The report provides the Analysis (Vol. I) of results, and detailed data and statistical summaries (Vol. II, Appendices) of representative electric and magnetic field (EMF) profiles on TGV-A trains between Paris and Tours formore » two electro-technologies (1.5 KV DC near Paris, and 2x25 KV at 50 Hz AC).« less

Photocopy from Evan Leigh's Modern Cotton Spinning (Vol 1), Manchester, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Photocopy from Evan Leigh's Modern Cotton Spinning (Vol 1), Manchester, 1873 (PL XX); illustration used by eminent British textile engineer to exemplify the ultimate development in American cotton mill technology. - Harmony Manufacturing Company, Mill Number 3, 100 North Mohawk Street, Cohoes, Albany County, NY

Basic EMC (Electromagnetic Compatibility) Technology Advancement for C3 Systems - Model Revision for IEMCAP (Intrasystem Electromagnetic Compatibility Analysis Program).

DTIC Science & Technology

1984-10-01

8217:- . . . .:- . . . * *. . - . . -’" - *. - . " . * - -A REFERENCES [1] J. L. Bogdanor , et. al., Intrasystem Electromagnetic Compatibility Analy- sis Program, Technical Report, RADC-TR-74...286, Vol. IV A, Rome Air -.- Development Center, Griffiss AFB, NY, November 1982. [30] J0 B. Bogdanor , M. D. Siegel, G. L. Weinstock, Intra-Vehicle

Technology 2004, Vol. 2

NASA Technical Reports Server (NTRS)

1995-01-01

Proceedings from symposia of the Technology 2004 Conference, November 8-10, 1994, Washington, DC. Volume 2 features papers on computers and software, virtual reality simulation, environmental technology, video and imaging, medical technology and life sciences, robotics and artificial intelligence, and electronics.

GLOBECOM '92 - IEEE Global Telecommunications Conference, Orlando, FL, Dec. 6-9, 1992, Conference Record. Vols. 1-3

NASA Astrophysics Data System (ADS)

Papers are presented on such topics as the wireless data network in PCS, advances in digital mobile networks, ATM switching experiments, broadband applications, network planning, and advances in SONET/SDH implementations. Consideration is also given to gigabit computer networks, techniques for modeling large high-speed networks, coding and modulation, the next-generation lightwave system, signaling systems for broadband ISDN, satellite technologies, and advances in standardization of low-rate signal processing.

Implementing a Strategically-Focused Science and Technology Program for Missile Defense

DTIC Science & Technology

2004-07-01

Development Practices: Updating Trends and Benchmarking Best Practices,” Journal of Product Innovation Management , Vol 14, 1997, pp. 429–458. V-18...Development,” Journal of Product Innovation Management , Vol. 15, 1998, pp. 57–74. V-32 situation. Thus, each stage-gate process must be customized to meet the

Electrodynamic Tethers and E-Sails as Active Experiment Testbeds and Technologies in Space

NASA Astrophysics Data System (ADS)

Gilchrist, B. E.; Wiegmann, B.; Johnson, L.; Bilen, S. G.; Habash Krause, L.; Miars, G.; Leon, O.

2017-12-01

The use of small-to-large flexible structures in space such as tethers continues to be studied for scientific and technology applications. Here we will consider tether electrodynamic and electrostatic interactions with magneto-plasmas in ionospheres, magnetospheres, and interplanetary space. These systems are enabling fundamental studies of basic plasma physics phenomena, allowing direct studies of the space environment, and generating technological applications beneficial for science missions. Electrodynamic tethers can drive current through the tether based on the Lorenz force adding or extracting energy from its orbit allowing for the study of charged bodies or plasma plumes moving through meso-sonic magnetoplasmas [1]. Technologically, this also generates propulsive forces requiring no propellant and little or no consumables in any planetary system with a magnetic field and ionosphere, e.g., Jupiter [2]. Further, so called electric sails (E-sails) are being studied to provide thrust through momentum exchange with the hypersonic solar wind. The E-sail uses multiple, very long (10s of km) charged, mostly bare rotating conducting tethers to deflect solar wind protons. It is estimated that a spacecraft could achieve a velocity over 100 km/s with time [3,4]. 1. Banks, P.M., "Review of electrodynamic tethers for space plasma science," J. Spacecraft and Rockets, vol. 26, no. 4, pp. 234-239, 1989. 2. Talley, C., J. Moore, D. Gallagher, and L. Johnson, "Propulsion and power from a rotating electrodynamic tether at Jupiter," 38th AIAA Aerospace Sciences Meeting and Exhibit, January 2000. 3. Janhunen, P., "The electric sail—A new propulsion method which may enable fast missions to the outer solar system," J. British Interpl. Soc., vol. 61, no. 8, pp. 322-325, 2008. 4. Wiegman, B., T. Scheider, A. Heaton, J. Vaughn, N. Stone, and K. Wright, "The Heliopause Electrostatic Rapid Transit System (HERTS)—Design, trades, and analyses performed in a two-year NASA investigation of electric sail propulsion systems," 53rd AIAA/SAE/ASEE Joint Propulsion Conf., 10-12 July 2017, Atlanta, GA.

Evaluation of the Utilization of Research and Development Results by the Naval Facilities Engineering Command.

DTIC Science & Technology

1980-09-01

Transfer, Vol. 3, No. 2, Spring 1979. Jolly, J. A., J. W . Creighton, and David A. Tansik, The Journal of Technology Transfer, Vol. 4, No. 1, Fall 1-9-79...200 Stovall Strr t , . VA 22332. Released as a Technical Report by: W . M. Tolles Dean of Research Unclassified SECURITY CLASSIFICATION OF ’wee 0469 Rom...SUPPLEMENTARY NOT*5S IN Itv a 110010 (Cewtfn,. -R .evoro old* It 066040pweE OW defo 4V blooS .MSe) Technology Transfer Civil Engineering Laboratory Research and

Demonstration of a Model-Based Technology for Monitoring Water Quality and Corrosion in Water-Distribution systems

DTIC Science & Technology

2016-12-01

Kamojjala, 2014, “Real-Time M0deling of Water Distribution Systems: A Case Study ,” Journal AWWA, Vol. 106, No. 9 (September 2014.) Feinauer, Lynn R...Quality and Corrosion in Water-Distribution Systems Final Report on Project F07-AR05 Co ns tr uc tio n En gi ne er in g R es ea rc h La bo ra to...Final Report on Project F07-AR05 Vicki L. Van Blaricum Construction Engineering Research Laboratory U.S. Army Engineer Research and Development Center

Kansas Department of Transportation research & technology news, vol. 6 #2, December 2013.

DOT National Transportation Integrated Search

2013-12-01

Research & Technology News is a newsletter published by the Kansas Department of : Transportation, Bureau of Researchs Technology Transfer Section, in cooperation with : the Federal Highway Administration and the U.S. Department of Transportation.

Technology resource document for the assembled chemical weapons assessment environmental impact statement. Vol. 2 : assembled systems for weapons destruction at Anniston Army Depot.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kimmell, T.; Folga, S., Frey, G.; Molberg, J.

2001-05-04

This volume of the Technical Resource Document (TRD) for the ''Environmental Impact Statement (EIS) for the Design, Construction and Operation of One or More Pilot Test Facilities for Assembled Chemical Weapons Destruction Technologies at One or More Sites'' (PMACWA 2001g) pertains to the destruction of assembled chemical weapons (ACW) stored at Anniston Army Depot (ANAD), located outside Anniston, Alabama. This volume presents technical and process information on each of the destruction technologies applicable to treatment of the specific ACW stored at ANAD. The destruction technologies described are those that have been demonstrated as part of the Assembled Chemical Weapons Assessmentmore » (ACWA) selection process (see Volume 1).« less

JPRS Report, Science & Technology China

DTIC Science & Technology

1989-02-02

40091007b Beijing WEISHENGWU XUEBAO [ACTA MICROBIOLOGICA SINICA] in Chinese Vol 28 No 3, Sep 88 pp 257- 264 [English abstract of article by Gong Jianhua...G.H., KAPL-M-SMS-31, 1956, pp 4-6. 4. Caldwell, C.S., WAPD -CP-1030, 1956, pp 1-5. 5. Himmelblau, D.M., et al., J. CHEM. ENG. DATA, Vol 5 No 1, 1

Mechanical Properties of Structural Polymers. Computer Simulations and Key Experiments

DTIC Science & Technology

1992-09-30

Technology", edited by R.W. Cahn, P. Haasen, and E.J. Kramer, (VCH: Weinheim, Germany) (vol. editor H. Mughrabi ) Vol. 6, in the press (1992). 14. A.S. Argon...34, Acta Metall. et Mater., submitted for publication. 5 32. A. Galeski, Z. Bartczak, A.S. Argon and R.E. Cohen, "Morphological Al - terations during

Flight Testing of Night Vision Systems in Rotorcraft (Test en vol de systemes de vision nocturne a bord des aeronefs a voilure tournante)

DTIC Science & Technology

2007-07-01

SAS System Analysis and Studies Panel • SCI Systems Concepts and Integration Panel • SET Sensors and Electronics Technology Panel These...Daylight Readability 4-2 4.1.4 Night-Time Readability 4-2 4.1.5 NVIS Radiance 4-2 4.1.6 Human Factors Analysis 4-3 4.1.7 Flight Tests 4-3 4.1.7.1...position is shadowing. Moonlight creates shadows during night-time just as sunlight does during the day. Understanding what cannot be seen in night-time

Acta Aeronautica et Astronautica Sinica.

DTIC Science & Technology

1982-07-28

AERONAUTICA ET ASTRONAUTICA SINICA - <,y English pages: 212 _r Source : Acta Aeronautica et Astronautica Sinica, Vol. 2, Nr. 4, December 1981 , . pp. 1...ADVOCATED OR IMPLIED ARE THOSE OP THE SOURCE ANDDO NOT NECESSARILY REFLECT THE POSITION TRANSLATION DIVISION OR OPINION OF THE FOREnjN TECHNOLOGY DI...axial) solution section code 2 Lower Corner Symbols i code of sectional cylindrical coordinate system j,k radial and peripheral codes of solution

The Armys Bandwidth Bottleneck

DTIC Science & Technology

2003-08-01

representation requires a minimum of eight bits of information per pixel. The cinematic illusion of movement requires about 32 frames per second.3 In...Information Theory, vol. 46, no. 2 ( March 2000), pp. 388-404. 3. The development and adoption of new methods—including so- called dynamic protocols—for...Delaney, “Independent Review of Technology Maturity Assessment for Future Combat Systems Increment 1” ( March 3, 2003). The study was commissioned by the

Building the Joint Battlespace Infosphere. Volume 2: Interactive Information Technologies

DTIC Science & Technology

1999-12-17

G. A . Vouros, “ A Knowledge- Based Methodology for Supporting Multilingual and User -Tailored Interfaces ,” Interacting With Computers, Vol. 9 (1998), p...project is to develop a two-handed user interface to the stereoscopic field analyzer, an interactive 3-D scientific visualization system. The...62 See http://www.hitl.washington.edu/research/vrd/. 63 R. Baumann and R. Clavel, “Haptic Interface for Virtual Reality Based

Naval Surface Warfare Center Technical Digest. Research and Technology - Shaping Future Naval Systems

DTIC Science & Technology

1991-09-01

1948. Neurodynamics , out of print for thirty years, 4. Rosenblatt. F., Principles of Neurodynamics : Perceptrons was obtained from the Defense...1961. 156 Aeronautical Labs technical report. This report 5. Rosenblatt, F., Principles of Neurodynamics : Perceptrons was delivered after a long wait...Part 1, Wiley, NY, 1983. plorations in the Microstructure of Cognition , Vol. 1. MIT Press, Cambridge, MA, 1986. 8. Gorman, P. and Sejnowski, T

A Coherent VLSI Design Environment.

DTIC Science & Technology

1986-03-31

Schema were a CMOS sorter and a TTL PC board for gathering statistics from a Multibus. Neither design was completed using Schema, but at least in the...technique for automatically adjusting signal delays in an MOS system has been developed. The Dynamic Delay Adjustment (DDA) technique provides...34Synchronization Reliability in CMOS Technology," IEEE J. of Solid - State Circuits, Vol. SC-20, No. 4, pp. 880-883, 1985. * [8] J. Hohl, W. Larsen and L. Schooley

Aircraft Simulator: Multiple-Cockpit Combat Mission Trainer Network.

DTIC Science & Technology

1984-01-01

Force Human Resources Laboratory (AFHRL), the Air Force Office of Scientific Research (AFOSR), and the Southeastern Center for Electrical Engineering...New York: IEEE Press. Rapumno, R. A. , A Shimsaki, N. (1974). Synchronization of earth stations to satellite-switched sequences. Comunications ...Satellite Technology, 33 (Progress in Astronautics and Aeronautics) , 411-429. Tobagi, F. A. (1980). Multiaccess protocols in packet comunication systems. IEEE TMS. C". , 4 (vol. CO-28), 468-488. 27 ORR .0--000

Basic EMC (Electromagnetic Compatibility) Technology Advancement for C3 Systems. Volume 1B. Demodulation Radio Frequency Interference Effects in Operational Amplifier Circuits.

DTIC Science & Technology

1985-02-01

Then it follows that H2 (fl,-f 2) (-flf Thus, the total amplitude of the intermodulation signal at fre- quency fAF is given by6 V = V +I mA2 III(fl 1-f...RFI suppression in the manner described. 229 . * . ... ..... 4 -*.-., ,e ’ - ."..~ REFERENCES 1. G. Kaplan , "Computer Aided Design," IEEE Spectrum, Vol

Technology Demonstration of the Zero Emissions Chromium Electroplating System

DTIC Science & Technology

2008-02-01

Phase I trivalent chromium results ................................................................... 23 18 Phase II total chromium in PRD fluid results...0 xa B D F H J L Sam pies Figure 16. Phase II iron results. ERDC/CERL TR-05-35, Vol. 1 23 Trivalent Chromium Phase I Analysis for Phase I was...with the samples. Each sample was analyzed twice, and an average was computed. Figure 17 shows the results. ANAD has specified that Trivalent Chromium

Fault-Tolerant VLSI Design Assessments for Advanced Avionics Department. Literature Review. Phase 1

DTIC Science & Technology

1982-02-05

negative sense. Another facet of the literature review is to acquaint the researchers with the immense literature base for electronic technology applicable ...Riley, "Special Report: Semiconductor Memories are Tested Over Data-Storage Application ", Electronics, vol. 46, August 19. G. Luecke, J. P. Mize and W...Design and Evaluation of Self-Checking Systems", Report Submitted to the Mathematical and Information Science Division of the Office of Naval

Technology resource document for the assembled chemical weapons assessment environmental impact statement. Vol. 4 : assembled systems for weapons destruction at Pueblo Chemical Depot.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kimmell, T.; Folga, S., Frey, G.; Molberg, J.

2001-04-30

This volume of the Technical Resource Document (TRD) for the ''Environmental Impact Statement (EIS) for the Design, Construction and Operation of One or More Pilot Test Facilities for Assembled Chemical Weapons Destruction Technologies at One or More Sites'' (PMACWA 2001c) pertains to the destruction of assembled chemical weapons (ACW) stored at Pueblo Chemical Depot (PCD), located outside Pueblo, Colorado. This volume presents technical and process information on each of the destruction technologies applicable to treatment of the specific ACW stored at PCD. The destruction technologies described are those that have been demonstrated during Phase I of the Assembled Chemical Weaponsmore » Assessment (ACWA) demonstration process (see Volume 1).« less

AGARD Flight Test Techniques Series. Volume 18. Flight Testing of Radio Navigation Systems. (Les Essais en Vol des Systemes de Radionavigation)

DTIC Science & Technology

2000-04-01

18 Flight Testing of Radio Navigation Systems (les Essais en vol des systemes de radionavigation) This AGARDograph has been sponsored by the Systems...Techniques Series - Volume 18 Flight Testing of Radio Navigation Systems (les Essais en vol des syst~mes de radionavigation) Edited by H. Bothe H.J...Landing Test and Other Short-Range 19853 Applications by P. de Benquoe D’Agut, H. Rieheek and A. Pool 17. Analogue Signal Conditioning for Flight Test

AGARD Flight Test Techniques Series. Volume 12. The Principles of Flight Test Assessment of Flight-Safety-Critical Systems in Helicopters (Les Principes de l’Evaluation, dans le Cadre des Essais en Vol, des Systemes Indispensables a la Securite de Vol des Helicopteres)

DTIC Science & Technology

1994-08-01

AGARD-AG-300 Vol. 12 04 ADVISORY GROUP FOR AEROSPACE RESEARCH & DEVELOPMENT 7 RUE ANCELLE, 92200 NEUILLY-SUR-SEINE, FRANCE AUG 0195 AGARDograph 300...AGARD Flight Test Techniques Series Volume 12 on The Principles of Flight Test Assessment of Flight-Safety-Critical Systems in Helicopters (Les...and Availability on Back Cover AGARD-AG-300 Vol. 12 ADVISORY GROUP FOR AEROSPACE RESEARCH & DEVELOPMENT 7 RUE ANCELLE, 92200 NEUILLY-SUR-SEINE, FRANCE

Technology Directions for the 21st Century. Vol. 2

NASA Technical Reports Server (NTRS)

Crimi, Giles F.; Verheggen, Henry; Malinowski, John; Malinowski, Robert; Botta, Robert

1996-01-01

The Office of Space Communications (OSC) is tasked by NASA to conduct a planning process to meet NASA's science mission and other communications and data processing requirements. A set of technology trend studies was undertaken by Science Applications International Corporation (SAIC) for OSC to identify quantitative data that can be used to predict performance of electronic equipment in the future to assist in the planning process. Only commercially available, off-the-shelf technology was included. For each technology area considered, the current state of the technology is discussed, future applications that could benefit from use of the technology are identified, and likely future developments of the technology are described. The impact of each technology area on NASA operations is presented together with a discussion of the feasibility and risk associated with its development. An approximate timeline is given for the next 15 to 25 years to indicate the anticipated evolution of capabilities within each of the technology areas considered. This volume contains four chapters: one each on technology trends for database systems, computer software, neural and fuzzy systems, and artificial intelligence. The principal study results are summarized at the beginning of each chapter.

No One at the Controls: The Legal Implications of Fully Autonomous Targeting

DTIC Science & Technology

2012-05-04

Technology and the Law of Armed Conflict: Technological Meteorites and Legal Dinosaurs ?,” in U.S. Naval War College International Law Studies, vol...Penguin Press, 2009. Stewart, Darren M. “New Technology and the Law of Armed Conflict: Technological Meteorites and Legal Dinosaurs ?.” In U.S. Naval

Visual Propaganda and Extremism in the Online Environment

DTIC Science & Technology

2014-07-01

Larry Gross, Michael Morgan, and Nancy Signorielli, “The Mainstreaming of American Violence Profile No. 11 ,” Journal of Communication , Vol. 30, Summer...states remain strategic actors, eager to adopt emerging technologies and adapt policy to advance national interests. 11 Revolutions in communication ...MA: Blackwell Publishing, 2004, pp. 170-174. 11 . Doris Graber: “Television News Without Pictures?” Criti- cal Studies in Mass Communication , Vol. 4

Autonomous Sonar Classification Using Expert Systems

DTIC Science & Technology

1992-06-01

34Multisensor Integration and Fusion in Intelligent System," ZEEE Tmnsactions on Systems, Man and Cybernetics, vol. 19 no. 5, September/Octciber...34 University of California Santa Barbara Department of Computer Science Technical Report TRCS89-06, February 1989. ZEEE , vol. 71 no. 7, July 1983, pp. 872...AutonomousUnderwater Vehicles" , Proceedingsof the ZEEE Oceanic Engineering Society Conference A W 92, Washington DC, June 1992. Corkill, Daniel, "BlackboardSystems," AIErpert, vol. 6 no. 9, September 1991, pp. 40-47. 559

OIT Times--Summer 2001, Vol. 4, No. 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2001-06-01

Summer 2001 edition of the OIT Times newsletter, an 8-page quarterly publication produced by the Office of Industrial Technologies. This issue covers the return on federal investment in OIT-sponsored R&D technologies and contains lists of emerging technologies in each Industry of the Future.

The 1973 GSFC battery workshop, second day. [technology transfer

NASA Technical Reports Server (NTRS)

1973-01-01

Technological progress in the development, testing, and manufacturing of nickel-cadmium battery cells as well as hydrogen cells is presented. The following major topics were discussed: (1) carbonate analysis; (2) nickel-cadmium memory effect; (3) use of batteries in an automatic acquisition and control system; (4) accelerated testing; (5) formulation of a mathematical odel for a nickel-cadmium cell; (6) development of a light weight nickel-cadmium battery capable of delivering 20 watt hours per pound; (7) magnetic testing of nickel-cadmium cells; (8) design and performance characteristics of nickel-hydrogen and silver-hydrogen cells; and (9) development of a semiprismatic cell design. For Vol. 1, see N75-15152.

volBrain: An Online MRI Brain Volumetry System

PubMed Central

Manjón, José V.; Coupé, Pierrick

2016-01-01

The amount of medical image data produced in clinical and research settings is rapidly growing resulting in vast amount of data to analyze. Automatic and reliable quantitative analysis tools, including segmentation, allow to analyze brain development and to understand specific patterns of many neurological diseases. This field has recently experienced many advances with successful techniques based on non-linear warping and label fusion. In this work we present a novel and fully automatic pipeline for volumetric brain analysis based on multi-atlas label fusion technology that is able to provide accurate volumetric information at different levels of detail in a short time. This method is available through the volBrain online web interface (http://volbrain.upv.es), which is publically and freely accessible to the scientific community. Our new framework has been compared with current state-of-the-art methods showing very competitive results. PMID:27512372

volBrain: An Online MRI Brain Volumetry System.

PubMed

Manjón, José V; Coupé, Pierrick

2016-01-01

The amount of medical image data produced in clinical and research settings is rapidly growing resulting in vast amount of data to analyze. Automatic and reliable quantitative analysis tools, including segmentation, allow to analyze brain development and to understand specific patterns of many neurological diseases. This field has recently experienced many advances with successful techniques based on non-linear warping and label fusion. In this work we present a novel and fully automatic pipeline for volumetric brain analysis based on multi-atlas label fusion technology that is able to provide accurate volumetric information at different levels of detail in a short time. This method is available through the volBrain online web interface (http://volbrain.upv.es), which is publically and freely accessible to the scientific community. Our new framework has been compared with current state-of-the-art methods showing very competitive results.

Aircraft Wake Vortices: An Assessment of the Current Situation

DTIC Science & Technology

1991-01-01

1979 , DOT/TSC, Cambridge, MA. 36. Burnham, D.C., "Chicago Monostatic Acoustic Vortex Sensing System, Vol. I : Data Collection and Reduction," FAA-RD-79...April 1979 , DOT/TSC, Cambridge, MA. 45. Hallock, J.N., "Vortex Advisory System Safety Analysis; Vol. I : Analytical Model," FAA-RD-78-68. I , September...Industry Representatives," March 1979 , Economics & Science Planning Inc., Washington, DC. 106. Hallock, J.N., "Vortex Advisory System, Vol. I : Effectiveness

Development of Fiber Reinforced Track Pad Materials

DTIC Science & Technology

1986-04-01

Transfer and Vulcanization of Rubber , I.R.I. Monograph, Elsevier, 1971. 12 Bergstrom, E.W., " Wear Resistant Rubber Tank Track Pads," Rock Island Arsenal...Fracture Mechanics to Rubber Articles, Including Tyres ," Phil. Trans. R. Soc. Lond. A299,,189-202 (1981). 10 Gent, Fielding-Russell, Livingston, and...System for Rubber Bonded to Brass-Plated Steel Tyre Cord," NR Technology, vol 11, Part 2, 1980, pp 21-27. 16 Lindley, P.B., Engineering Design with

Terahertz Technology and Molecular Interactions

DTIC Science & Technology

2010-12-16

numerical identification algorithm, based on a simple threshold model, showed that the probability for false alarm ( PFA ) for the least favorable of...Briefly put, Phase I of MACS was to develop in 18 months a sensor system in a 1 cu ft vol- ume that could correctly identify with a PFA < 10-4 gases in a...observe spectral lines that have fractional ab- sorptions of 10-7 there are six orders of magnitude in sensitivity at stake. If spectral lines have

China Report, Science and Technology.

DTIC Science & Technology

1987-05-06

86) 96 Slip-Line Field Problems Solved by Method of Approach (Hu Zhong , et al.; QINGHUA DAXUE XUEBAO, No 5, Oct 86) 97 Technical Development...SWITCHING-MODE REGULATOR Beijing QINGHUA DAXUE XUEBAO (ZIRAN KEXUE BAN) [JOURNAL OF TSINGHUA UNIVERSITY (NATURAL SCIENCE)] in Chinese Vol 26 No 5, Oct... Beijing QINGHUA DAXUE XUEBAO (ZIRAN KEXUE BAN) [JOURNAL OF TSINGHUA UNIVERSITY (NATURAL SCIENCE)] in Chinese Vol 26 No 5, Oct 86 pp 10-21 [English

Prognostic Health Management of DoD Assets

DTIC Science & Technology

2015-06-01

34Acoustic emission for monitoring the mechanical behaviour of natural fibre composites: a literature review," Composites Part A: Applied Science and...34Acoustic emission of debonding between fibre and matrix to evaluate local adhesion," Composites Science and Technology, vol. 63, pp. 2155-2162, 2003...classification in carbon fibre composites using acoustic emission: A comparison of three techniques," Composites Part B: Engineering, vol. 68, pp. 424-430, 1

Federal Logistics Information System (FLIS) Procedures Manual. General and Administrative Information. Volume 1.

DTIC Science & Technology

1996-04-01

Logistics Transfer 3 Data KFA Match Through Association 1 KFC File Data Minus Security Classi- 1 Note 1: Output DICs other than Search and Inter- fled...vols 8/9 KEC Output Exceeds AUTODIN Limitations 4,5 vols 8/9 KFA Match through Association 4 vols 8/9 KFC File Data Minus Security Classified...Activities 2 Nuclear Ordnance 4 Reference Numbers 2 SECURITY CLASSIFIED DATA, FILE DATA MINUS 4 vols 8/9, DIC KFC SECURITY CLASSIFIED CHARACTERISTICS 4 vols

Technology resource document for the assembled chemical weapons assessment environmental impact statement. Vol. 5 : assembled systems for weapons destruction at Blue Grass Army Depot.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kimmell, T.; Folga, S., Frey, G.; Molberg, J.

2001-05-02

This volume of the Technical Resource Document (TRD) for the ''Environmental Impact Statement (EIS) for the Design, Construction and Operation of One or More Pilot Test Facilities for Assembled Chemical Weapons Destruction Technologies at One or More Sites'' (PMACWA 2001g) pertains to the destruction of assembled chemical weapons (ACW) stored in the U.S. Army's unitary chemical stockpile at Blue Grass Army Depot (BGAD), located outside Richmond, Kentucky. This volume presents technical and process information on each of the destruction technologies applicable to treatment of the specific ACW stored at BGAD. The destruction technologies described are those that have been demonstratedmore » as part of the Assembled Chemical Weapons Assessment (ACWA) selection process (see Volume 1).« less

A Safe, Self-Calibrating, Wireless System for Measuring Volume of Any Fuel at Non-Horizontal Orientation

NASA Technical Reports Server (NTRS)

Woodward, Stanley E.; Taylor, Bryant D.

2010-01-01

A system for wirelessly measuring the volume of fluid in tanks at non-horizontal orientation is predicated upon two technologies developed at Langley Research Center. The first is a magnetic field response recorder that powers and interrogates magnetic field response sensors [ Magnetic Field Response Measurement Acquisition System, (LAR-16908), NASA Tech Briefs, Vol. 30, No. 6 (June 2006), page 28]. Magnetic field response sensors are a class of sensors that are powered via oscillating magnetic fields and when electrically active respond with their own magnetic fields whose attributes are dependent upon the magnitude of the physical quantity being measured. The response recorder facilitates the use of the second technology, which is a magnetic field response fluid-level sensor ["Wireless Fluid- Level Sensors for Harsh Environments," (LAR-17155), NASA Tech Briefs, Vol. 33, No. 4 (April 2009), page 30]. The method for powering and interrogating the sensors allows them to be completely encased in materials (Fig. 1) that are chemically resilient to the fluid being measured, thereby facilitating measurement of substances (e.g., acids, petroleum, cryogenic, caustic, and the like) that would normally destroy electronic circuitry. When the sensors are encapsulated, no fluid (or fluid vapor) is exposed to any electrical component of the measurement system. There is no direct electrical line from the vehicle or plant power into a fuel container. The means of interrogating and powering the sensors can be completely physically and electrically isolated from the fuel and vapors by placing the sensor on the other side of an electrically non-conductive bulkhead (Fig. 2). These features prevent the interrogation system and its electrical components from becoming an ignition source.

Lifecycle Cost Assessment of Fuel Cell Technologies for Soldier Power System Applications. Paper and Presentation for the 43rd Power Sources Conference held 8-9 July 2008, Philadelphia, PA

DTIC Science & Technology

2008-07-09

PEMFC in Federal Markets,” 2007 Fuel Cell Seminar, San Antonio, TX, 17 October 2007. 7. Fok, K., “Metal Hydride Fuel Cells: Increases in Power...Lauderdale, FL, March 17-20, 2008. 10. Zhao J., et al, “Reclaim/recycle of Pt/C catalysts for PEMFC ,” Energy Conversion and Management, vol. 48...hydrogen PEMFC or SOFC systems – Baratto et al, Journal of Power Sources – Citigroup, Dist. Telecom Backup – Battelle, Fuel Cell Seminar 2007 • Fuel

Analysis, Design and Synthesis Methods for Guidance and Control Systems (Les Methodes d’Analyse de Conception et de Synthese Pour les Systemes de Guidage et de Pilotage)

DTIC Science & Technology

1990-06-01

Areas of Degraded Performance," Navi- gation , Journal of the Institute of Navigation, Vol. 34, No.4, Winter 87-88, pp. 297-306. 7. Klass, Philip J...34Industry Devising GPS Receivers with Hybrid Navigation Aids," Aviation Week & Spa-e Technology 14 December 1987, p121- 3. 8. Klass, Philip J... Kotler , G., and Shaw, H. J., "Single-Mode Fiber-Optic Directional Coupler," Electron. Lett., 4 (1979), p. 29. 26 Burns, W. K., Moeller, R. P., Villarruel

JPRS Report, Science & Technology, USSR: Life Sciences

DTIC Science & Technology

1988-04-05

Order Boundary Conditions [A.N. Zaikin; BIOFIZIKA, Nov-Dec 87] 4 Biotechnology Optimization of Batch Cultivation of Biomass [Ye.G. Kosman, I.P...Vol 297, No 4 , Dec 87 (manuscript received 17 Jul 87) pp 1018-1021 [Article by I.B. Kaplan, S.I. Malyshenko, A.B. Fedina, M.E. Talyanskiy, M.Ya...Crosslinking and Effects on Combination of Retinal With Bacterioopsin 18400193 Moscow BIOLOGICHESKIYE MEMBRANY in Russian Vol 4 , No 11, Nov 87

Transient Effects in Turbulence Modelling.

DTIC Science & Technology

1979-12-01

plenum region of a liquid-metal- cooled fast breeder reactor (LMFBR). The efficient heat transfer characteristics of liquid metal coolant, combined...Transients in Generalized Liquid-Metal Fast Breeder Reactor Outlet Plenums," Nuclear Technology, Vol. 44, July 1979, p. 210. 135 15. Lorenz, J. J., "MIX... Sodium Coolant in the Outlet Plenum of a Fast Nuclear Reactor ," Int. J. Heat Mass Transfer, Vol. 21, 1978, pp. 1565-1579. 19. Chen, Y. B., Golay, M. W

JPRS Report, Science & Technology USSR: Space Biology & Aerospace Medicine, Vol. 22, No. 1, January-February 1988

DTIC Science & Technology

1988-06-23

belief that resistance of the system that controls human movements to the disrupting effect of rhythmic photostimulation is determined by the capacity...No strict correlation between the negative balance of calcium and mineral content in leg compact bones and foot spongy bones was found. There was a...In terms of negative and positive trends leg and foot bones were in better condition in the drug group. The techniques used were assessed with

General Results in Optimal Control of Discrete-Time Nonlinear Stochastic Systems

DTIC Science & Technology

1988-01-01

P. J. McLane, "Optimal Stochastic Control of Linear System. with State- and Control-Dependent Distur- bances," ZEEE Trans. 4uto. Contr., Vol. 16, No...Vol. 45, No. 1, pp. 359-362, 1987 (9] R. R. Mohler and W. J. Kolodziej, "An Overview of Stochastic Bilinear Control Processes," ZEEE Trans. Syst...34 J. of Math. anal. App.:, Vol. 47, pp. 156-161, 1974 [14) E. Yaz, "A Control Scheme for a Class of Discrete Nonlinear Stochastic Systems," ZEEE Trans

Information Technology Security Training Requirements: A Role- and Performance-Based Model

DTIC Science & Technology

1998-04-01

Journal, Vol.9, no. 2, pp. 18-20, 1995. Kearsley, Greg. Andragogy (M. Knowles), Washington, DC: George Washington University, 1996. Knowles, M.S...The Modern Practice of Adult Education: Andragogy vs. Pedagogy, New York: Association Press, 1970. Information Technology Security Training

Precision Machining Application and Technology: An Overview and Perspective.

DTIC Science & Technology

1983-08-24

diamond turning lathes are being used to produce computer discs. Bryant Symons, an English firm, has reported diamond turning an aluminum computer disk at...34 Precision Engineering, Vol. 5(2), Guildford, Engl nd, July 1983. Watt, G., " Lathe for Generation of Spherical -arfaces of Revolution," given to Optical...Precision CNC Diamond Turning Machine," Annuals of the CIRP, Vol. 31/1, p 409, 1982. 8. Bryant Simmons Product Brochur-, "Ultra Precision Oiamond Turning

JPRS Report, Science & Technology USSR: Physics & Mathematics.

DTIC Science & Technology

1991-01-09

Transient Ablation of Polymers by Ultrashort Laser Pulses [N.P. Furzikov; KVANTOVAYA ELEKTRONIKA, Vol 17 No 5, May 90] 14 Monokinetization of Atom...thermo-e.m.f. was found to depend not only linearly on the energy of laser pulses and the intensity of laser radiation, but also on the absorption... Ultrashort Laser Pulses 907J0090E Moscow KVANTOVAYA ELEKTRONIKA in Russian Vol 17 No 5, May 90 pp 619-620 [Article by N.P. Furzikov, Scientific

JPRS Report, Science & Technology, China.

DTIC Science & Technology

1992-11-18

LPS O-Antigen Genes in E. coli HB101 40091002L Beijing YICHUAN XUEBAO fACTA GENETICA SINICA] in Chinese Vol 19 No 4, Aug 92 pp 378-384 [English...Isolation of Vitamine B2 Auxotroph and Preliminary Genetic Mapping in Salmonella typhimurium 40091002J Beijing YICHUAN XUEBAO [ACTA GENETICA SINICA] in...YICHUAN XUEBAO [ACTA GENETICA SINICA] in Chinese Vol 19 No 4, Aug 92 pp 369-377 [English abstract of article by Hai Weili [3189 0251 0500] and

JPRS Report, Science & Technology, China

DTIC Science & Technology

1991-03-25

Tang Xiaoshan [0781 1420 40091007C Beijing YICHUAN XUEBAO [ACTA 1472], Chen Hongshan [7115 7703 3790], et al., of the GENETICA SINICA] in Chinese Vol...the plant height, all of characters 40091007B Beijing YICHUAN XUEBAO [ACTA were unstable in R2. The chromosome number was 24 GENETICA SINICA] in...in a superior variety GENETICA SINICA] in Chinese Vol 17 No 6, of Triticum aestivum L., Xiaoyan No. 6. Both Xiaoyan Dec 90 pp 455-460 No. 6 and its

Identification des parametres du moteur de l'avion Cessna Citation X pour la phase de croisiere a partir des tests en vol et a base des reseaux de neurones =

NASA Astrophysics Data System (ADS)

Zaag, Mahdi

La disponibilite des modeles precis des avions est parmi les elements cles permettant d'assurer leurs ameliorations. Ces modeles servent a ameliorer les commandes de vol et de concevoir de nouveaux systemes aerodynamiques pour la conception des ailes deformables des avions. Ce projet consiste a concevoir un systeme d'identification de certains parametres du modele du moteur de l'avion d'affaires americain Cessna Citation X pour la phase de croisiere a partir des essais en vol. Ces essais ont ete effectues sur le simulateur de vol concu et fabrique par CAE Inc. qui possede le niveau D de la dynamique de vol. En effet, le niveau D est le plus haut niveau de precision donne par l'autorite federale de reglementation FAA de l'aviation civile aux Etats-Unis. Une methodologie basee sur les reseaux de neurones optimises a l'aide d'un algorithme intitule le "grand deluge etendu" est utilisee dans la conception de ce systeme d'identification. Plusieurs tests de vol pour differentes altitudes et differents nombres de Mach ont ete realises afin de s'en servir comme bases de donnees pour l'apprentissage des reseaux de neurones. La validation de ce modele a ete realisee a l'aide des donnees du simulateur. Malgre la nonlinearite et la complexite du systeme, les parametres du moteur ont ete tres bien predits pour une enveloppe de vol determinee. Ce modele estime pourrait etre utilise pour des analyses de fonctionnement du moteur et pourrait assurer le controle de l'avion pendant cette phase de croisiere. L'identification des parametres du moteur pourrait etre realisee aussi pour les autres phases de montee et de descente afin d'obtenir son modele complet pour toute l'enveloppe du vol de l'avion Cessna Citation X (montee, croisiere, descente). Cette methode employee dans ce travail pourrait aussi etre efficace pour realiser un modele pour l'identification des coefficients aerodynamiques du meme avion a partir toujours des essais en vol. None None None

Revolutions in Science and Technology: Future Threats to US National Security

DTIC Science & Technology

2011-04-01

34Ultrafast ytterbium-doped bulk lasers and laser amplifiers, " Applied Physics B. Vol. 69, 1999. pp. 3-17. 47 See Martin Richardson et al. page 15...breakout and surprise 53 Martin Richardson, Timothy McComb, and Vikas Sudesh, "High Power Fiber Lasers and Applications to Manufacturing," Conference...Journal of Applied Physics, Vol. 49, 2010. ss1n 2008, Martin Richardson, et al. stated that the "high power fiber laser market, currently estimated to

Robust Recognition of Loud and Lombard speech in the Fighter Cockpit Environment

DTIC Science & Technology

1988-08-01

the latter as inter-speaker variability. According to Zue [Z85j, inter-speaker variabilities can be attributed to sociolinguistic background, dialect...34 Journal of the Acoustical Society of America , Vol 50, 1971. [At74I B. S. Atal, "Linear prediction for speaker identification," Journal of the Acoustical...Society of America , Vol 55, 1974. [B771 B. Beek, E. P. Neuberg, and D. C. Hodge, "An Assessment of the Technology of Automatic Speech Recognition for

Critical Review and Technology Assessments, 󈨟-󈨠

DTIC Science & Technology

1991-09-01

EUTELCIC ALLOY 3. Pages 406-409 890900 WATER SORPTION IN EPOXY THIN FILMS MCMASTER, M.G. UC, ,ERKELEY.CA) TRANSACTIONS. 89.22 SOANE, Di. ,EEEJHMT. Vol...NATION, 21 228-002 PENETRATION THROUGH PFA TUBING AND Vol. S, No. 2, Pags ANTISTATIC PFATUBING 22-28 THIS COLUMN FOCUSES ON A STUIDY OF PFA AND...ANTISTATIC WFA TURING (SUPPLIED BY GALnlEK CORPORATION. CHAS•K MN). THE A.NTISATIC PFA .MATERIAL USED HAS A SURFACE RESISTIVIrY OF lOTO THE ELEVENTH POWER -10

Nuclear Coexistence: Rethinking U.S. Policy to Promote Stability in an Era of Proliferation

DTIC Science & Technology

1994-04-01

The Spread of Nuclear Weapons 1989 -90 (Boulder: Westview Press, 1990). 22. See William C. Martel and Steven E. Miller, "Controlling Borders and Nuclear...Security, Fall 1989 , Vol. 14, No. 2, pp. 140-41, for J. Robert Oppenheimer’s concerns about the dangers of the develop- ment of thermonuclear weapons. 4...Paradox of Technology," International Security, Vol. 14, No. 2 (Fall 1989 ), pp. 198-202. 6. Some argue that the U.S. strategy has relatively little

Electra: Repetitively Pulsed 700 J, 100 ns Electron Beam Pumped KrF Laser

DTIC Science & Technology

2006-05-01

the Inertial Fusion Energy (IFE) requirements for durability, efficiency, and cost. The technologies developed on Electra should be directly scalable...and S. Searles, "Electron beam pumped krypton fluoride lasers for fusion energy ," Proc. IEEE, vol. 92, pp. 1043-1056, July 2004. [2] M.C. Myers, J.D...34Repetitively pulsed, high energy KrF lasers for inertial fusion energy ," Nucl. Fusion, vol. 44, pp. S247-S253, November 2004. [3] J.D. Sethian, M

User acceptance of a picture archiving and communication system. Applying the unified theory of acceptance and use of technology in a radiological setting.

PubMed

Duyck, P; Pynoo, B; Devolder, P; Voet, T; Adang, L; Vercruysse, J

2008-01-01

The aim of this study is to gain insight into the individual user acceptance of PACS by the radiology department staff of the Ghent University Hospital. Hereto a basic--direct effects only--form of UTAUT was assessed. Ninety-four questionnaires were distributed and 56 usable questionnaires were returned (19 radiologists - 37 technologists). The questionnaire consisted of scales of Venkatesh et al. [13] for performance expectancy (PE), effort expectancy (EE), facilitating conditions (FC), social influence (SI), self-efficacy (SE), attitude (ATT), anxiety (ANX) and behavioral intention (BI), and a scale of Moore et al. [22] to assess the perceived voluntariness of PACS-use. The reliability of all scales, except FC and voluntariness, was acceptable to good. The voluntariness scale was divided into a mandatoriness (MAN) and a voluntariness (VOL) measure. Both radiologists and technologists seem to welcome PACS, with radiologists having higher ratings on PE, EE, ATT, VOL and BI. Only PE and FC were salient for predicting BI, while EE and SI were not salient. Variance explained in behavioral intention to use PACS was 48%. Both radiologists and technologists were positive towards PACS and had strong intentions to use PACS. As other healthcare professionals, they appear to make their technology acceptance decision independent from their superiors, hereby focusing on usefulness rather than on ease of use. It is also important that support is supplied. Basic UTAUT is an adequate model to assess technology acceptance in a radiological setting.

77 FR 48733 - Transitional Program for Covered Business Method Patents-Definitions of Covered Business Method...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-14

... Office 37 CFR Part 42 Transitional Program for Covered Business Method Patents--Definitions of Covered Business Method Patent and Technological Invention; Final Rule #0;#0;Federal Register / Vol. 77 , No. 157... Business Method Patents-- Definitions of Covered Business Method Patent and Technological Invention AGENCY...

Adult Literacy & Technology Newsletter. Vol. 4. Nos. 1-4.

ERIC Educational Resources Information Center

Adult Literacy & Technology Newsletter, 1990

1990-01-01

These four issues comprise Volume 4 of the "Adult Literacy & Technology (AL&T) Newsletter." Issue 1 contains the following articles: "Preparing Our Children for Their Future, Not Our Past" (David Thornburg); "The Video Project" (Michael Hanish); "Images of the Future" (Terilyn Turner); "Hyperapplications: Implications for Reading and Writing" (Jay…

Lightweight Vacuum Jacket for Cryogenic Insulation - Appendices to Final Report. Volume 2

NASA Technical Reports Server (NTRS)

Barclay, D. L.; Bell, J. E.; Brogren, E. W.; Straayer, J. W.

1975-01-01

The feasibility is demonstrated of producing a lightweight vacuum jacket using state-of-the-art technology and materials. Design and analytical studies were made on an orbital maneuvering system fuel tank. Preliminary design details were completed for the tank assembly which included an optimized vacuum jacket and multilayered insulation system. A half-scale LH2 test model was designed and fabricated and a force/stiffness proof test was conducted on the vacuum jacket. A vacuum leak rate of 0.00001 was measured, approximately 1500 hours of vacuum pressure was sustained, and 29 vacuum pressure cycles were experienced prior to failure. For vol. 1, see N75-26192.

76 FR 29083 - Agriculture Priorities and Allocations System

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-19

... Vol. 76 Thursday, No. 97 May 19, 2011 Part III Department of Agriculture Farm Service Agency 7 CFR Part 789 Agriculture Priorities and Allocations System; Proposed Rule #0;#0;Federal Register / Vol. 76 , No. 97 / Thursday, May 19, 2011 / Proposed Rules#0;#0; [[Page 29084

Air-Ground Integration: Preliminary Results from the Coalition Attack Guidance Experiment (The International C2 Journal Volume 5, Number 3, 2011)

DTIC Science & Technology

2011-01-01

Mitchell (DNK), Royal Danish Defence College Sandeep Mulgund (USA), The MITRE Corporation Mark Nissen (USA), Naval Postgraduate School Mink Spaans (NLD...Research Management 25(1): 28-33. Cash, J.I., Jr., F.W. McFarlan, J.L. McKenney, and M.R. Vitale. 1988. Corporate Information Systems Management 2nd...Between Structure and Technology. In Handbook of Organizational Design vol. 2: 3-38, eds. P. C. Nystrom and W. H. Starbuck . New York, NY: Oxford

Land Vehicle Navigation ? A Worldwide Perspective

NASA Astrophysics Data System (ADS)

French, Robert L.

This paper was presented at the NAV '90 conference and was first published in the Journal in 1991 (Vol. 44, p. 25). It is followed by comments from Christopher Querée.The future shakeout and consolidation of vehicle navigation technologies and systems approaches will occur primarily in the vehicle location, mobile data communications, and man/machine interface areas. Digital maps will not be directly affected because, although there is still a dearth of formal standards, there is already a high degree of uniformity among approaches being pursued in all parts of the world.

An Exploratory Case Study of Information-Sharing and Collaboration within Air Force Supply Chain Management

DTIC Science & Technology

2006-03-01

International Journal of Production Economics , Vol. 93-94, pp. 53-99, 2005. -----. “Approximate...Optimization of a Two-level Distribution Inventory System,” International Journal of Production Economics , Vol. 81-81, pp. 545-553, 2003...Scaling Down Multi-Echelon Inventory Problems,” International Journal of Production Economics , Vol. 71, pp. 255-261, 2001. Axsater, Sven

Research Program Peer Review: Purposes, Principles, Practices, Protocols

DTIC Science & Technology

2004-06-01

Statement 1994-95. Canberra: AGPS. Cook- Deegan , R.M. Merit Review for Federally Funded Science and Technology: A White Paper for the Council of the...18p. Craig -B, "SPE Peer-Review Critique", JOURNAL OF PETROLEUM TECHNOLOGY, 1994, Vol 46, Iss 7, pp 563-563 Cram-DL Stebbins-M Eom-HS Ratto-N

Osteoblastic cell response to spark plasma-sintered zirconia/titanium cermets.

PubMed

Fernandez-Garcia, Elisa; Guillem-Marti, Jordi; Gutierrez-Gonzalez, Carlos F; Fernandez, Adolfo; Ginebra, Maria-Pau; Lopez-Esteban, Sonia

2015-01-01

Ceramic/metal composites, cermets, arise from the idea to combine the dissimilar properties in the pure materials. This work aims to study the biocompatibility of new micro-nanostructured 3 Y-TZP/Ti materials with 25, 50 and 75 vol.% Ti, which have been successfully obtained by spark slasma sintering technology, as well as to correlate their surface properties (roughness, wettability and chemical composition) with the osteoblastic cell response. All samples had isotropic and slightly waved microstructure, with sub-micrometric average roughness. Composites with 75 vol.% Ti had the highest surface hydrophilicity. Surface chemical composition of the cermets correlated well with the relative amounts used for their fabrication. A cell viability rate over 80% dismissed any cytotoxicity risk due to manufacturing. Cell adhesion and early differentiation were significantly enhanced on materials containing the nanostructured 3 Y-TZP phase. Proliferation and differentiation of SaOS-2 were significantly improved in their late-stage on the composite with 75 vol.% Ti that, from the osseointegration standpoint, is presented as an excellent biomaterial for bone replacement. Thus, spark plasma sintering is consolidated as a suitable technology for manufacturing nanostructured biomaterials with enhanced bioactivity. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Shuttle mission simulator. Volume 2: Requirement report, volume 2, revision C

NASA Technical Reports Server (NTRS)

Burke, J. F.

1973-01-01

The requirements for space shuttle simulation which are discussed include: general requirements, program management, system engineering, design and development, crew stations, on-board computers, and systems integration. For Vol. 1, revision A see N73-22203, for Vol 2, revision A see N73-22204.

Exhaust Emissions from Gasoline- and LPG-Powered Vehicles Operating at the Altitude of Mexico City.

PubMed

Gamas, Erick D; Diaz, Luis; Rodriguez, René; López-Salinas, E; Schifter, Isaac; Ontiveros, Luis

1999-10-01

Unburned hydrocarbons (HCs), carbon monoxide (CO), and oxides of nitrogen (NO x ) are the compounds regulated as pollutants by an environmental standard in the Metropolitan Area of Mexico City (MAMC). The main fuel used in vehicular transportation is gasoline, and the use of liquefied petroleum gas (LPG) is now an alternative as low emission technology to decrease the environmental impact of transportation operations. The environmental impact of commercial gasoline consumption in the Valley of Mexico was estimated by on-road and FTP-75 testing of three formulations of gasoline (one leaded [octane 81] and two unleaded [one octane 87 and one octane 93]). A fleet of 30 vehicles was used: 10 were chosen that had pre-1990 technology, while 12 were 1991-1996 vehicles equipped with fuel injection, catalytic converters, and air/ fuel ratio control technology. The remaining eight vehicles were high-performance new model vehicles (1995-1996) equipped with the newest technology available for pollution control. Fifteen vehicles in the fleet were also tested for the effect of changing from leaded to unleaded gasoline. Three different LPG formulations were tested using three vehicles representative of the LPG-powered fleet in the MAMC. Two gasoline-to-LPG conversion certified commercial systems were evaluated following the BAR-90 and the HOT-505 procedures. Emissions corresponding to the high-octane (premium) gasoline showed a 15% higher contribution to HCs with a 6% lower reactivity than the 87 octane gasoline; the HCs in the exhaust for premium gasoline are mainly isoparaffins. When the vehicles were tested on the road at high speeds, an average 3% increase in mileage was obtained when vehicles were switched from leaded to unleaded gasoline, while a 5% increase in mileage was observed when vehicles were switched from 87 octane to premium gasoline. The tests of LPG formulations indicated that a change in composition from 60% vol of propane to 85.5% vol reduces levels of HCs and CO emissions; such is not the case for the NO x emissions. The higher the concentration of propane, the higher the levels of NO x that reached values above the maximum limits set by the environmental standard. A value of 70% vol of propane in the LPG mixture, with variations no greater than 4%, seems to be the best method for reducing pollutant emissions in Mexico City.

Proceedings of the 7th Annual TARDEC Ground Vehicle Survivability Symposium, March 26-28, 1996, Naval Postgraduate School, Monterey, CA Volume 1 - Unclassified Session Papers

DTIC Science & Technology

1996-05-01

McClelland, Technical Director, U.S. Army Submitted TARDEC 9:25 A.M. Keynote None Dr. Kenneth J. Oscar, Deputy Assistant Secretary of the Army...Submitted for Procurement 9:50 A.M. Industry Perspective Vol. 1 .3 Dr. Kenneth M. Krall, Vice President - Advanced Programs & Technology, Loral Vought...Project Manager (PM), Light Tactical Vehicles 12:00 A.M. Defense Supply Center Business Processes - Meeting Vol. 1 57 Customer Needs COL Joseph M

Flammability limits of lithium-ion battery thermal runaway vent gas in air and the inerting effects of halon 1301

NASA Astrophysics Data System (ADS)

Karp, Matthew Eugene

Lithium-ion (rechargeable) and lithium-metal (non-rechargeable) battery cells put aircraft at risk of igniting and fueling fires. Lithium batteries can be packed in bulk and shipped in the cargo holds of freighter aircraft; currently lithium batteries are banned from bulk shipment on passenger aircraft [1]. The federally regulated Class C cargo compartment extinguishing system's utilization of a 5 %vol Halon 1301 knockdown concentration and a sustained 3 %vol Halon 1301 may not be sufficient at inerting lithium-ion battery vent gas and air mixtures [2]. At 5 %vol Halon 1301 the flammability limits of lithium-ion premixed battery vent gas (Li-Ion pBVG) in air range from 13.80 %vol to 26.07 %vol Li-Ion pBVG. Testing suggests that 8.59 %vol Halon 1301 is required to render all ratios of the Li-Ion pBVG in air inert. The lower flammability limit (LFL) and upper flammability limit (UFL) of hydrogen and air mixtures are 4.95 %vol and 76.52 %vol hydrogen, respectively. With the addition of 10 %vol and 20 %vol Halon 1301 the LFL is 9.02 %vol and 11.55 %vol hydrogen, respectively, and the UFL is 45.70 %vol and 28.39 %vol hydrogen, respectively. The minimum inerting concentration (MIC) of Halon 1301 in hydrogen and air mixtures is 26.72 %vol Halon 1301 at 16.2 %vol hydrogen. The LFL and UFL of Li-Ion pBVG and air mixtures are 7.88 %vol and 37.14 %vol Li-Ion pBVG, respectively. With the addition of 5 %vol, 7 %vol, and 8 %vol Halon 1301 the LFL is 13.80 %vol, 16.15 %vol, and 17.62 % vol Li-Ion pBVG, respectively, and the UFL is 26.07 %vol, 23.31 %vol, and 21.84 %vol Li- Ion pBVG, respectively. The MIC of Halon 1301 in Li-Ion pBVG and air mixtures is 8.59 %vol Halon 1301 at 19.52 %vol Li-Ion pBVG. Le Chatelier's mixing rule has been shown to be an effective measure for estimating the flammability limits of Li-Ion pBVGes. The LFL has a 1.79 % difference while the UFL has a 4.53 % difference. The state of charge (SOC) affects the flammability limits in an apparent parabolic manner, where the widest flammability limits are at or near 100 % SOC. [1] IATA. Lithium Battery Guidance Document. 7 Jan. 2016. Guidance for complying with provisions applicable to the transport by air of lithium batteries as set out in the 57th Edition of the IATA Dangerous Goods Regulations (DGR). [2] Webster, Harry. Flammability assessment of bulk-packed, rechargeable lithium-ion cells in transport category aircraft. Office of Aviation Research, Federal Aviation Administration, 2006.

Environmental implications on the oxygenation of gasoline with ethanol in the metropolitan area of Mexico City.

PubMed

Schifter, I; Vera, M; Díaz, L; Guzmán, E; Ramos, F; López-Salinas, E

2001-05-15

Motor vehicle emission tests were performed on 12 in-use light duty vehicles, made up of the most representative emission control technologies in Mexico City: no catalyst, oxidative catalyst, and three way catalyst. Exhaust regulated (CO, NOx, and hydrocarbons) and toxic (benzene, formaldehyde, acetaldehyde, and 1,3-butadiene) emissions were evaluated for MTBE (5 vol %)- and ethanol (3, 6, and 10 vol %)-gasoline blends. The most significant overall emissions variations derived from the use of 6 vol % ethanol (relative to a 5% MTBE base gasoline) were 16% decrease in CO, 28% reduction in formaldehyde, and 80% increase in acetaldehyde emissions. A 26% reduction in CO emissions from the oldest fleet (< MY 1991, without catalytic converter), which represents about 44% of the in-use light duty vehicles in Mexico city, can be attained when using 6 vol% ethanol-gasoline, without significant variation in hydrocarbons and NOx emissions, when compared with a 5% vol MTBE-gasoline. On the basis of the emissions results, an estimation of the change in the motor vehicle emissions of the metropolitan area of Mexico city was calculated for the year 2010 if ethanol were to be used instead of MTBE, and the outcome was a considerable decrease in all regulated and toxic emissions, despite the growing motor vehicle population.

RDT quarterly : vol. 3, no. 3.

DOT National Transportation Integrated Search

2000-01-01

The Missouri Transportation Bulletin is published by the Technology Transfer Assistance Program of the Missouri Department of Transportation, Jefferson City, Missouri. The opinions, findings or recommendations expressed in thisBulletin are not necess...

RDT quarterly : vol. 3, no. 2.

DOT National Transportation Integrated Search

1999-01-01

The Missouri Transportation Bulletin is published by the Technology Transfer Assistance Program of the Missouri Department of Transportation, : Jefferson City, Missouri. The opinions, findings or recommendations expressed in thisBulletin are not nece...

Aerospace Materials Process Modelling

DTIC Science & Technology

1988-08-01

development of advanced technologies for the fabrication of close-tolerance parts, in conjunction with the development of advanced materials, plays a key...1883. 17. Gegel, H. L., et al., "Materials Modeling and Intrinsic Workability for Simulation of Bulk Deformiti6n," Advanced Technology of Plasticity, Vol...process in the last three decades. As a result of technological advances gained in aerospace industry there has been an increasing demand for the

Soft computing analysis of the possible correlation between temporal and energy release patterns in seismic activity

NASA Astrophysics Data System (ADS)

Konstantaras, Anthony; Katsifarakis, Emmanouil; Artzouxaltzis, Xristos; Makris, John; Vallianatos, Filippos; Varley, Martin

2010-05-01

This paper is a preliminary investigation of the possible correlation of temporal and energy release patterns of seismic activity involving the preparation processes of consecutive sizeable seismic events [1,2]. The background idea is that during periods of low-level seismic activity, stress processes in the crust accumulate energy at the seismogenic area whilst larger seismic events act as a decongesting mechanism releasing considerable energy [3,4]. A dynamic algorithm is being developed aiming to identify and cluster pre- and post- seismic events to the main earthquake following on research carried out by Zubkov [5] and Dobrovolsky [6,7]. This clustering technique along with energy release equations dependent on Richter's scale [8,9] allow for an estimate to be drawn regarding the amount of the energy being released by the seismic sequence. The above approach is being implemented as a monitoring tool to investigate the behaviour of the underlying energy management system by introducing this information to various neural [10,11] and soft computing models [1,12,13,14]. The incorporation of intelligent systems aims towards the detection and simulation of the possible relationship between energy release patterns and time-intervals among consecutive sizeable earthquakes [1,15]. Anticipated successful training of the imported intelligent systems may result in a real-time, on-line processing methodology [1,16] capable to dynamically approximate the time-interval between the latest and the next forthcoming sizeable seismic event by monitoring the energy release process in a specific seismogenic area. Indexing terms: pattern recognition, long-term earthquake precursors, neural networks, soft computing, earthquake occurrence intervals References [1] Konstantaras A., Vallianatos F., Varley M.R. and Makris J. P.: ‘Soft computing modelling of seismicity in the southern Hellenic arc', IEEE Geoscience and Remote Sensing Letters, vol. 5 (3), pp. 323-327, 2008 [2] Eneva M. and Ben-Zion Y.: ‘Techniques and parameters to analyze seismicity patterns associated with large earthquakes', Geophysics Res., vol. 102, pp. 17785-17795, 1997a [3] Habermann R. E.: ‘Precursory seismic quiescence: past, present and future', Pure Applied Geophysics, vol. 126, pp. 279-318, 1988 [4] Matthews M. V. and Reasenberg P. A.: ‘Statistical methods for investigating quiescence and other temporal seismicity patterns', Pure Applied Geophysics, vol. 126, pp. 357-372, 1988 [5] Zubkov S. I.: ‘The appearance times of earthquake precursors', Izv. Akad. Nauk SSSR Fiz. Zemli (Solid Earth), No. 5, pp. 87-91, 1987 [6] Dobrovolsky I. P., Zubkov S. I. and Miachkin V. I.: ‘Estimation of the size of earthquake preparation zones', Pageoph, vol. 117, pp. 1025-1044, 1979 [7] Dobrovolsky I. P., Gershenzon N. I. And Gokhberg M. B.: ‘Theory of electrokinetic effects occurring at the final stage in the preparation of a tectonic earthquake', Physics of the Earth and Planetary Interiors, vol. 57, pp. 144-156, 1989 [8] Richter C. F.: ‘Elementary Seismology', W.H.Freeman and Co., San Francisco, 1958 [9] Choy G. L. and Boatwright J. L.: ‘Global patterns of radiated seismic energy and apparent stress', Journal of Geophysical Research, vol. 84 (B5), pp. 2348-2350, 1995 [10] Haykin S.: ‘Neural Networks', 2nd Edition, Prentice Hall, 1999 [11] Jang J., Sun T. and Mizutany E.: ‘Neuro-fuzzy and soft computing', Prentice Hall, Upper Saddle River, NJ, 1997 [12] Konstantaras A., Varley M.R., Vallianatos F., Collins G. and Holifield P.: ‘Detection of weak seismo-electric signals upon the recordings of the electrotelluric field by means of neuron-fuzzy technology', IEEE Geoscience and Remote Sensing Letters, vol. 4 (1), 2007 [13] Konstantaras A., Varley M.R., Vallianatos F., Collins G. and Holifield P.: ‘Neuro-fuzzy prediction-based adaptive filtering applied to severely distorted magnetic field recordings', IEEE Geoscience and Remote Sensing Letters, vol. 3 (4), 2006 [14] Maravelakis E., Bilalis N., Keith J. and Antoniadis A.: ‘Measuring and Benchmarking the Innovativeness of SME's: a three dimensional Fuzzy Logic Approach', Production Planning and Control Journal, vol. 17 (3), pp. 283-292, 2006 [15] Bodri B.: ‘A neural-network model for earthquake occurrence', Geodynamics, vol. 32, pp. 289-310, 2001 [16] Skounakis E., Karagiannis V. and Vlissidis A.: ‘A Versatile System for Real-time Analyzing and Testing Objects Quality', Proceedings-CD of the 4th International Conference on "New Horizons in Industry, Business and Education" (NHIBE 2005), Corfu, Greece, pp. 701-708, 2005

Dose reduction for abdominal and pelvic MDCT after change to graduated weight-based protocol for selecting quality reference tube current, peak kilovoltage, and slice collimation.

PubMed

Herts, Brian R; Baker, Mark E; Obuchowski, Nancy; Primak, Andrew; Schneider, Erika; Rhana, Harpreet; Dong, Frank

2013-06-01

The purpose of this article is to determine the decrease in volume CT dose index (CTDI(vol)) and dose-length product (DLP) achieved by switching from fixed quality reference tube current protocols with automatic tube current modulation to protocols adjusting the quality reference tube current, slice collimation, and peak kilovoltage according to patient weight. All adult patients who underwent CT examinations of the abdomen or abdomen and pelvis during 2010 using weight-based protocols who also underwent a CT examination in 2008 or 2009 using fixed quality reference tube current protocols were identified from the radiology information system. Protocol pages were electronically retrieved, and the CT model, examination date, scan protocol, CTDI(vol), and DLP were extracted from the DICOM header or by optical character recognition. There were 15,779 scans with dose records for 2700 patients. Changes in CTDI(vol) and DLP were compared only between examinations of the same patient and same CT system model for examinations performed in 2008 or 2009 and those performed in 2010. The final analysis consisted of 1117 comparisons in 1057 patients, and 1209 comparisons in 988 patients for CTDI(vol) and DLP, respectively. The change to a weight-based protocol resulted in a statistically significant reduction in CTDI(vol) and DLP on three MDCT system models (p < 0.001). The largest average CTDI(vol) decrease was 13.9%, and the largest average DLP decrease was 16.1% on a 64-MDCT system. Both the CTDI(vol) and DLP decreased the most for patients who weighed less than 250 lb (112.5 kg). Adjusting the CT protocol by selecting parameters according to patient weight is a viable method for reducing CT radiation dose. The largest reductions occurred in the patients weighing less than 250 lb.

Aircraft Alerting Systems Criteria Study. Volume II. Human Factors Guidelines for Aircraft Alerting Systems

DTIC Science & Technology

1977-05-01

Effect of Mixing Flashing and Steady Irrelevant Lights, Ergonomics, Vol. 6 (3), 1963, pp. 27-294. Creelman , C. D., Detection of Signals of Uncertain...Frequency, Acoustical Sok. America-J, Vol. 32 (7), July 1960, pp. 805-10. Creelman , C. D., Detection, Discrimination, and Loudness of Short Tones

Martin Perl and the Tau Lepton

Science.gov Websites

; Technology in Experimental Particle Physics", Winter 1995, Vol. 25, No. 4, pages 4 - 27 Perl compares you to non-federal websites. Their policies may differ from this site. Website Policies/Important

Missouri transportation bulletin : vol. 16, no. 1.

DOT National Transportation Integrated Search

2000-01-01

The Missouri Transportation Bulletin is published by the Technology Transfer Assistance Program of the Missouri Department of Transportation, : Jefferson City, Missouri. The opinions, findings or recommendations expressed in this Bulletin are not nec...

Missouri transportation bulletin : vol. 18, no. 1.

DOT National Transportation Integrated Search

2002-01-01

The Missouri Transportation Bulletin is published by the Technology Transfer Assistance Program of the Missouri Department of Transportation, Jefferson City, Missouri. The opinions, findings or recommendations expressed in this Bulletin are not neces...

Missouri transportation bulletin : vol. 18, no. 2.

DOT National Transportation Integrated Search

2002-01-01

The Missouri Transportation Bulletin is published by the Technology Transfer Assistance Program of the Missouri Department of Transportation, Jefferson City, Missouri. The opinions, findings or recommendations expressed in this Bulletin are not neces...

Missouri transportation bulletin : vol. 17, no. 1.

DOT National Transportation Integrated Search

2001-01-01

The Missouri Transportation Bulletin is published by the Technology Transfer Assistance Program of the Missouri Department of Transportation, Jefferson City, Missouri. The opinions, findings or recommendations expressed in this Bulletin are not neces...

Plant Operations for Wastewater Facilities, Vol. II, Part D. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Plant Operations for Wastewater Facilities, Vol. II, Part E. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Plant Operations for Wastewater Facilities, Vol. II, Part B. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Plant Operations for Wastewater Facilities, Vol. II, Part A. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Plant Operations for Wastewater Facilities, Vol. II, Part C. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Materials and Manufacturing Processes. Volume 9. Number 1

DTIC Science & Technology

1994-01-01

and Coatings Technology , Vol.36, No.9, p.1429, (1987). p.303, (1988). 45. Badzian, A.R., Advances in X-ray 53. Suzuki, H., H. Matsubavo, and N. Analysis... Technology Division of Metallurgy, N-7034 Trondheim, Norway E. Bathen Microscan, Tonstadgrenda 23, N-7075 Tiller, Norway D. 0ymo and Norsk Hydro A.S...these materials both in general technology behind traditional design and manufacture. Special and advanced ceramics. It also gives the considerations

Advances in cryogenic engineering. Vols. 37A & 37B - Proceedings of the 1991 Cryogenic Engineering Conference, Univ. of Alabama, Huntsville, June 11-14, 1991

NASA Technical Reports Server (NTRS)

Fast, Ronald W. (Editor)

1991-01-01

The present volume on advances in cryogenic engineering discusses heat and mass transfer in helium, heat transfer in cryogenic fluids, thermoacoustic oscillations, and insulation. Attention is given to applications of superconductivity with reference to magnetic stability and coil protection, cryogenic techniques, and refrigeration for electronics and superconducting systems. Topics addressed include compressors, expanders, and pumps for liquid helium, magnetic refrigerators, pulse tube refrigerators, and cryocoolers. Also examined are properties of cryogenic fluids, cryogenic applications in transportion and space science and technology, and cryogenic instrumentation.

Concept Engineering: An Investigation Of TIME versus Market Orientation in Product Concept Development

DTIC Science & Technology

1993-06-01

Designers and Champions of Innovation. Journal of Product Innovation Management . Vol. 8,91-103 Barabba, V. P., & Zaltman, G. (1991). Hearing the Voice of...Kleinschmidt, E. K. (1986). An Investigation into the New Product Process: Steps, Deficiencies, and Impact. Journal of Product Innovation Management . Vol...Product and Process Development. Journal of Product Innovation Management . Vol. 4,81-88 Goodman, M. (1974). Study Notes in System Dynamics. Cambridge, MA

Mission Planning for Tactical Aircraft (Preflight and In-Flight) (Systemes de Planification des Missions Pour Avions Tactiques) (Avant Vol et en Vol).

DTIC Science & Technology

1992-12-01

Ground-Based Mission Planning Systems 9 2.3 Networking Mission Planning Systems 11 2.4 Fully Automated Mission Planning I I 2.5 Unmanned Air Vehicles 13...Missile Engagement Zone RPV Remotely Piloted Vehicle MIDS Multifunction Information Distribution System RRDB Rapidly Reconfigurable Databus MIL-STD...Comrmantd OPORD Operations Order TV Television OPS Operational OR Operational Relationship UAV Unmanned Air Vehicle UAV Unnmanned Air Vehicle PA

Privacy-Enhancing Technologies for the Internet

DTIC Science & Technology

1997-01-01

http://www.communities.com/paper/swamp.html 7 David Chaum , ``Untraceable Electronic Mail, Return addresses, and Digital Pseudonyms,’’ Communications of...the ACM, February 1981, vol. 24 no. 2. http://www.eskimo.com/~weidai/mix-net.txt 8 David Chaum , ``Blind Signatures for Untraceable Payments...Privacy-enhancing technologies for the Internet Ian Goldberg David Wagner Eric Brewer University of California, Berkeley {iang,daw,brewer

Defense AT and L Magazine. Vol. 45, no. 5, September-October 2016

DTIC Science & Technology

2016-09-01

standard federal assistance awards. These contractors might be small, startup technology firms supported by venture capital, leading-edge technology...to provide effective contract oversight and present an accurate picture of contractor performance to the procuring contracting office. Lesson...mission footprints encompass a great deal of contractor activity, leadership that is not regularly engaged with the acquisition team often gives

DS2 Container and Weatherproofing Study

DTIC Science & Technology

1990-12-01

compatible with polyurethane based coating systems in general? Is it compatible with alkyd -based coatings? 10. How well do the labels placed on the...of the (older) alkyd enamel and (more recently) polyurethane camouflage coatings, leading eventually to seepage of the DS2. A shrink-wrap overpack...by John Wiley and Sons, Inc., Vol. 2, pp. 118- 119; Vol. 4, p. 3 and pp. 284-295; Vol. I, p. 133. 8. Fiber Composite Hybrid Materials, N.L. Hancox

Oak Ridge National Laboratory REVIEW, Vol. 25, Nos. 3 and 4, 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krause, C.

1992-01-01

The titles in the table of contents from this journal are: Wartime Laboratory; High-flux Years; Accelerating Projects; Olympian Feats; Balancing Act; Responding to Social Needs; Energy Technologies; Diversity and Sharing; Global Outreach; Epilogue

Survey of Advanced Technologies in Japan, Vol. 3: Database Reports

DTIC Science & Technology

1990-05-01

INDUSTRIAL CO. LTD. Y NEC CORPORATION, CSC INFORMATION TECHNOLOGY RESEARCH LABORATORIES Y THE UNIVERSITY OF ELECTRO-COMMUNICATIONS Y TOKYO INSTITUTE...77 by the National *"eau of Standards, and is an outgrowth of research performed by IBM. which was based on information theory, using computer...Y COMMUNICATION RESEARCH LABORATORY, MINISTRY OF POSTS AND TELECOMMUNICATIONS Y MATSUSHITA ELECTRONICS CORP., ELECTRONICS RESEARCH LABORATORY Y

Adaptive Modeling and Real-Time Simulation

DTIC Science & Technology

1984-01-01

34 Artificial Inteligence , Vol. 13, pp. 27-39 (1980). Describes circumscription which is just the assumption that everything that is known to have a particular... Artificial Intelligence Truth Maintenance Planning Resolution Modeling Wcrld Models ~ .. ~2.. ASSTR AT (Coninue n evrse sieIf necesaran Identfy by...represents a marriage of (1) the procedural-network st, planning technology developed in artificial intelligence with (2) the PERT/CPM technology developed in

JPRS Report, Science & Technology USSR: Chemistry

DTIC Science & Technology

1991-06-20

extremely water -intensive technological process that results in the pollution of natural waters by finely dispersed silt-and-clay suspensions that...against pollution . This review examines ways and means of reagent conditioning of circulating and waste waters during the development of placer deposits...in Water by Using Porous Sulfo Cation Exchange Resin [A. V Mamchenko, M.S. Novozhenyuk; KHIMIYA I TEKHNOLOGIYA VODY, Vol 13 No 1, Jan 91] ... 5

Spark plasma sintering of silicon carbide, multi-walled carbon nanotube and graphene reinforced zirconium diboride ceramic composite

NASA Astrophysics Data System (ADS)

Balaraman Yadhukulakrishnan, Govindaraajan

Scope and Method of Study: Space vehicles re-entering the earth's atmosphere experience very high temperatures due to aerodynamic heating. Ultra-high temperature ceramics (UHTC) with melting point higher than 3200°C are promising materials for thermal protection systems of such space vehicles re-entering the earth's atmosphere. Among several UHTC systems ZrB2 based ceramic composites are particularly important for thermal protection systems due to their better mechanical and thermoelectric properties and high oxidation resistance. In this study spark plasma sintering of SiC, carbon nanotubes (CNT) and graphene nano platelets (GNP) reinforced ZrB2 ultra-high temperature ceramic matrix composites is reported. Findings and Conclusions: Systematic investigations on the effect of reinforcement type (SiC, CNTs and GNP) and content (10-40 vol.% SiC, 2-6 vol.% CNTs and 2-6 vol.% GNP) on densification behavior, microstructure development, and mechanical properties (microhardness, bi-axial flexural strength, and indentation fracture toughness) are reported. With the similar SPS parameters near-full densification (>99% relative density) was achieved with 10-40 vol.% SiC, 4-6 vol.% CNT reinforced composites. Highly dense composites were obtained in 4-6 vol.% GNP reinforced composites. The SiC, CNT and GNP reinforcement improved the indentation fracture toughness of the composites through a range of toughening mechanisms, including particle shearing, crack deflection at the particle-matrix interface, and grain pull-outs for ZrB2-SiC composites, CNT pull-outs and crack deflection in ZrB2-CNT composites and crack deflection, crack bridging and GNP sheet pull-out for ZrB2 -GNP composites.

Design of Tactile Sensor Using Dynamic Wafer Technology Based on VLSI Technique

DTIC Science & Technology

2001-10-25

Charles Noback, Rober Carola," Human Anatomy and Physiology" third edition, 1995. [5] M.H. Raibert and John E. Tanner, "Design and Implementation of VLSI Tactile Sensing Computer" Robotics Research vol 1, 1983.

Clean Cities Now Vol. 19, No. 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2015-07-24

Now is the official bi-annual newsletter of Clean Cities, an initiative designed to reduce petroleum consumption in the transportation sector by advancing the use of alternative and renewable fuels, fuel economy improvements, idle-reduction measures, and new technologies, as they emerge.

Conference Proceedings of The Application of New Technologies to Improve the Delivery of Aerospace and Defence Information Held at Ottawa, Canada on 14-15 September 1983.

DTIC Science & Technology

1984-01-01

S : L : K -W+ ~ ~ : PP: R: ~FAC NAT:BL LANG:Bs IC: 1: T A 4 CQMIT< E INTERNATIONAL DE M<EDECINE ET DE PHARMACIE...PSYCHOLOGIQUES DE STRESS DANS LE VOL SPATIAL CONCEPTS ACTUELS S ,X ADAPTATON UMAINE AU VOL SPATIAL 5 1 8 EVUE INTERNATIONALE DES SERVICES DE _SANT< E ...Teea . l ,ale ol-ti 1te o sta ) aid pagty letIn* Ito lv te ttit 1.- e b26 l s oul, - t I o ottetlil tttd ye -eile .o o -

Science and Technology of Nanostructured Magnetic Materials: Proceedings of a NATO Advanced Study Institute Conference Held in Aghia Pelaghia, Crete, Greece on 24 June -6 July 1990. NATO ASI Series B: Physics. Volume 259

DTIC Science & Technology

1990-07-06

Tung in Silicon-Molecular Beam Epitaxy. vol. 11 eds. Erich Kasper and John C . Bean, CRC Press, Boca Raton, FL (1988), or J. Derrien and F. Arnaud...mum~ J goS-MS AD- A24 6 363 ..T.. C .... Magnetbic Mean eiteral C dstibtio I Edliited.b Gary A . ....... MagntOc aeria Series B: Physics Vol. 259 ’o98...NATO Scientific Affairs Division A Life Sciences Plenum Publishing Corporation B Physics New York and London C Mathematical and Physical Sciences Kluwer

Emerging Technologies: Something Borrowed, Something New

NASA Astrophysics Data System (ADS)

Heinhorst, Sabine; Cannon, Gordon

1999-04-01

The cover of the July 16, 1998 issue of Nature features a remarkable new "smart material" that can be used to print electronically on a variety of surfaces, including paper, plastic, and metal. The electrophoretic ink developed in J. Jacobson's lab at the Massachusetts Institute of Technology consists of liquid with dispersed, oppositely charged black and white microparticles that are contained in microcapsules. Application of a potential results in migration of the microparticles to opposite sides of the microcapsule, thereby generating either a white or black image that depends on the direction of the potential. Unlike liquid crystal displays, the image generated with electrophoretic ink is stable even after the power has been turned off. Cost and resolution of this new technology compare favorably with most other electronic image display systems currently in use or under development. Promising applications for electrophoretic ink in the future may range from street signs to electronic books (Comiskey et al., Vol. 394, pp 253-255; "News and Views" commentary by R. Wisnieff on pp 225-227).

International Aerospace and Ground Conference on Lightning and Static Electricity, Technical Papers: The Key to Lightning Technology Held in Orlando, Florida on 26-28 June 1984.

DTIC Science & Technology

1984-12-01

Security Classification) * C3 1 TERADATA STUDY 2 PERSONAL AUTHOR(S) , John Deckera 1 3a TYPE OF REPORT 12Tb TME COVEPED 4 T)A7C ’)E R- I) C ,,- vear Month...the paper. .Pi Tipaper was not available for incorporation into this book. 19-1 YSb . * THE RISK FACTOR IN AIRCRAFT LIGHTNING PROTECTION John C . Corbin...34Elect. World, Transmission Systems. Second edition, Vol.116, pp.1720-1721, 1766-1767, Nov John Wiley & Sons, Inc., New York, 1951. 1941. 5. Bruce, C . E. R

Evaluation of Hardware and Software for a Small Autonomous Underwater Vehicle Navigation System (SANS)

DTIC Science & Technology

1994-09-01

Hyslop , G.L., Schieber, G.E., Schwartz, M.K., "Automated Mission Planning for the Standoff Land Attack Missile (SLAM)", Proceedings of the...1993, pp. 277-290. [PARK80] Parkinson, B.W., "Overview", Global Positioning System, Vol. 1, The Institute of Navigation, Washington, D.C., 1980 , pp...Navigation Message", Global Positioning System, Vol. 1, The Institute of Navigation, Washington, D.C., 1980 , pp. 55-73. 139 [WOOD851 Wooden, W. H

Ultrasound Imaging Using Diffraction Tomography in a Cylindrical Geometry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chambers, D H; Littrup, P

2002-01-24

Tomographic images of tissue phantoms and a sample of breast tissue have been produced from an acoustic synthetic array system for frequencies near 500 kHz. The images for sound speed and attenuation show millimeter resolution and demonstrate the feasibility of obtaining high-resolution tomographic images with frequencies that can deeply penetrate tissue. The image reconstruction method is based on the Born approximation to acoustic scattering and is a simplified version of a method previously used by Andre (Andre, et. al., Int. J. Imaging Systems and Technology, Vol 8, No. 1, 1997) for a circular acoustic array system. The images have comparablemore » resolution to conventional ultrasound images at much higher frequencies (3-5 MHz) but with lower speckle noise. This shows the potential of low frequency, deeply penetrating, ultrasound for high-resolution quantitative imaging.« less

JPRS Report, Science & Technology, China

DTIC Science & Technology

1988-11-10

Technological Development Zone 40100004 Beijing BEIJING REVIEW in English 22 Aug 88 pp 7-8 [Text] We believe that the newly established Shanghai Caohejing...Temperatures 40090002a Beijing WULI XUEBAO [ACTA PHYSICA SINICA] in Chinese Vol 37 No 7, Jul 88 pp 1059-1064 [ English abstract of article by Chen...1065-1071 [ English abstract of article by Fang Ruiyi [2455 3843 1355], et al., of the Department of Physics, Beijing University] [Text] The

Human Factors Society, Annual Meeting, 35th, San Francisco, CA, Sept. 2-6, 1991, Proceedings. Vols. 1 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

These proceedings discuss human factor issues related to aerospace systems, aging, communications, computer systems, consumer products, education and forensic topics, environmental design, industrial ergonomics, international technology transfer, organizational design and management, personality and individual differences in human performance, safety, system development, test and evaluation, training, and visual performance. Particular attention is given to HUDs, attitude indicators, and sensor displays; human factors of space exploration; behavior and aging; the design and evaluation of phone-based interfaces; knowledge acquisition and expert systems; handwriting, speech, and other input techniques; interface design for text, numerics, and speech; and human factor issues in medicine. Also discussedmore » are cumulative trauma disorders, industrial safety, evaluative techniques for automation impacts on the human operators, visual issues in training, and interpreting and organizing human factor concepts and information.« less

Clean Cities Now Vol. 20, No. 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2017-01-13

Clean Cities Now is the official semi-annual newsletter of Clean Cities, an initiative designed to reduce petroleum consumption in the transportation sector by advancing the use of alternative and renewable fuels, fuel economy improvements, idle-reduction measures, and new technologies, as they emerge.

Clean Cities Now Vol. 19, No. 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2015-12-18

Clean Cities Now is the official bi-annual newsletter of Clean Cities, an initiative designed to reduce petroleum consumption in the transportation sector by advancing the use of alternative and renewable fuels, fuel economy improvements, idle-reduction measures, and new technologies, as they emerge.

Speaking with a Commonality Language: A Lexicon for System and Component Development

DTIC Science & Technology

2007-01-01

Abdullahil Azeem, “Impact of Commonality and Flexibility on Manufacturing Performance: A Simulation Study,” International Journal of Production Economics , Vols...Cycle Costs of Products,” International Journal of Production Economics , Vols. 60–61, April 1999, pp. 109–116. Robertson, David, and Karl Ulrich

Flight-Tested Prototype of BEAM Software

NASA Technical Reports Server (NTRS)

Mackey, Ryan; Tikidjian, Raffi; James, Mark; Wang, David

2006-01-01

Researchers at JPL have completed a software prototype of BEAM (Beacon-based Exception Analysis for Multi-missions) and successfully tested its operation in flight onboard a NASA research aircraft. BEAM (see NASA Tech Briefs, Vol. 26, No. 9; and Vol. 27, No. 3) is an ISHM (Integrated Systems Health Management) technology that automatically analyzes sensor data and classifies system behavior as either nominal or anomalous, and further characterizes anomalies according to strength, duration, and affected signals. BEAM (see figure) can be used to monitor a wide variety of physical systems and sensor types in real time. In this series of tests, BEAM monitored the engines of a Dryden Flight Research Center F-18 aircraft, and performed onboard, unattended analysis of 26 engine sensors from engine startup to shutdown. The BEAM algorithm can detect anomalies based solely on the sensor data, which includes but is not limited to sensor failure, performance degradation, incorrect operation such as unplanned engine shutdown or flameout in this example, and major system faults. BEAM was tested on an F-18 simulator, static engine tests, and 25 individual flights totaling approximately 60 hours of flight time. During these tests, BEAM successfully identified planned anomalies (in-flight shutdowns of one engine) as well as minor unplanned anomalies (e.g., transient oil- and fuel-pressure drops), with no false alarms or suspected false-negative results for the period tested. BEAM also detected previously unknown behavior in the F- 18 compressor section during several flights. This result, confirmed by direct analysis of the raw data, serves as a significant test of BEAM's capability.

Center for Advanced Sensors Year Two Funding (FY2006)

DTIC Science & Technology

2008-02-26

Cheong, and F. Zhao (2005) "Semantics-Based Optimization Across Uncoordinated Tasks in Networked Embedded Systems," Proceedings of the 5th ACM Conference...analysis," Optical Engineering, vol. 46, 116401, 2007. R.L. Espinola, E.L. Jacobs, C.E. Halford, D.H. Tofsted and R. Vollmerhausen, "Modeling...the target acquisition performance of active imaging systems," Optics Express, vol. 15, March, 2007. C.E. Halford, A.L. Robinson, E.L. Jacobs and

Motor carrier case study evaluation report : appendix C, Vol. 1 : analysis and observations, the Crescent Evaluation

DOT National Transportation Integrated Search

1994-02-01

The Crescent Project element of the HELP Program is a bi-national multi-jurisdictional : cooperative research and demonstration initiative involving the public and private sectors in an : application of advanced technologies for the creation of an in...

Iron Metallurgy: Technical Terminology Bulletin. Terminotech, Vol. 2, No. 7.

ERIC Educational Resources Information Center

General Electric Co. of Canada, Ltd., Montreal, Quebec.

This issue of a bulletin of technological terminology is devoted to iron metallurgy. Various aspects of iron production are described in both French and English. An English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended. (JB)

76 FR 3743 - Science and Technology Reinvention Laboratory Personnel Management Demonstration Project...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-20

... Demonstration Project, Department of the Army, Army Research, Development and Engineering Command, Armament Research, Development and Engineering Center (ARDEC); Notice #0;#0;Federal Register / Vol. 76 , No. 13... the Army, Army Research, Development and Engineering Command, Armament Research, Development and...

Power Transformers: Technical Terminology Bulletin. Terminotech, Vol.2, No. 6.

ERIC Educational Resources Information Center

General Electric Co. of Canada, Ltd., Montreal, Quebec.

This issue of a bulletin of technological terminology is devoted to power transformers. A brief narrative on the subject is presented in both French and English. An English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended. (JB)

Electric Motors: Technical Terminology Bulletin. Terminotech, Vol. 1, No. 2.

ERIC Educational Resources Information Center

General Electric Co. of Canada, Ltd., Montreal, Quebec.

This issue of a bulletin of technological terminology is devoted to electric motors. A brief narrative on the subject is included in both French and English. An English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended (JB).

Experimental Investigation of the Plasma Bullet and Its Applications

DTIC Science & Technology

2012-08-01

W. Hynes, M. Laroussi, and S. L. Tolle, “Cold Plasma Technology: Bactericidal Effects on Geobacillus Stearothermophilus and Bacillus Cereus...Polymers on Plasma Sterilization and Decontamination (Vol. 9, No. 6, 2012). The PI was a member of the Scientific Organizing Committee of two major

Characterization of the dimensional stability of advanced metallic materials using an optical test bench structure

NASA Technical Reports Server (NTRS)

Hsieh, Cheng; O'Donnell, Timothy P.

1991-01-01

The dimensional stability of low-density high specific-strength metal-matrix composites (including 30 vol pct SiC(p)/SXA 24-T6 Al, 25 vol pct SiC(p)/6061-T6 Al, 40 vol pct graphite P100 fiber/6061 Al, 50 vol pct graphite P100 fiber/6061 Al, and 40 vol pct P100 graphite fiber/AZ91D Mg composites) and an Al-Li-Mg metal alloy was evaluated using a specially designed five-strut optical test bench structure. The structure had 30 thermocouple locations, one retroreflector, one linear interferometer multilayer insulation, and various strip heaters. It was placed in a 10 exp -7 torr capability vacuum chamber with a laser head positioned at a window port, and a laser interferometer system for collecting dimensional change data. It was found that composite materials have greater 40-C temporal dimensional stability than the AL-Li-Mg alloy. Aluminum-based composites demonstrated better 40-C temporal stability than Mg-based composites.

China’s Strategic Modernization: Implications for the United States,

DTIC Science & Technology

1999-09-01

20. See for example, Wang Qingsong, Xiandai Junyong Gaojishu (Modern Military-Use High Technology), Beijing : AMS Press, 1993, pp. 251-254; Li , pp... Beijing : Jincheng Publishing House, 1996, pp. 148-164. Also see Cai 75 Delu and Li Ruifeng, "Electronic Security Technologies and Standards," Zhongguo...CAMA, 1996, Vol. 3, No. 6. Yang is from the Beijing Institute of Special Electromachinery ( Beijing Teshu Jidian Yanjiusuo). 66. Huang Tung, " M

Development of a Computerised Method of Determining Aircraft Maintenance Intervals.

DTIC Science & Technology

1985-09-01

Reliability. Vol.17. 1978. pp461-464. 23. , and Shunji Osaki. "Optimum Preventive Maintenance Policies for a 2-Unit Redundant System." IEEE...Transactions on Reliability. Vol.R-23. No.2. June 1974. pp86-91. 24. _ _, and Shunji Osaki. "A Summary of Optimum Preventive Maintenance Policies for a Two-Unit

Trust-Based Cooperative Games and Control Strategies for Autonomous Military Convoys

DTIC Science & Technology

2013-01-01

52] S. Goering, "Postnatal Reproductive Autonomy: Promoting Relational Autonomy and Self-Trust in New Parents," Bioethics , vol. 23, no. 1, pp. 9-19...Systems," Proceedings of the IEEE, vol. 95, no. 1, pp. 215-233, January 2007. [105] O. O’Neill, Autonomy and Trust in Bioethics . Cambridge: Cambridge

Estimating Performance of Single Bus, Shared Memory Multiprocessors

DTIC Science & Technology

1987-05-01

Chandy78] K.M. Chandy, C.M. Sauer, "Approximate methods for analyzing queuing network models of computing systems," Computing Surveys, vol10 , no 3...Denning78] P. Denning, J. Buzen, "The operational analysis of queueing network models", Computing Sur- veys, vol10 , no 3, September 1978, pp 225-261

India Renewable Integration Study | Energy Analysis | NREL

Science.gov Websites

India Renewable Integration Study India Renewable Integration Study An NREL grid integration study Energy into India's Electric Grid Vol. I-National Study and Vol. II-Regional Study resolves many system modeling, the study explored operational impacts of meeting India's 2022 targets and identified

Maximum Likelihood Detection of Low Rate Repeat Codes in Frequency Hopped Systems

DTIC Science & Technology

2013-04-01

Communications, vol. 33, pp. 385 – 393, May 1985. [4] W. Sweldens, “Fast block noncoherent decoding,” IEEE Commun. Lett., vol. 5, pp. 132–134, Apr...2001. [5] I. Motedayen-Aval and A. Anastasopoulos, “Polynomial- complexity noncoherent symbol-by-symbol detection with application to adaptive

Time Domain Algorithms.

DTIC Science & Technology

1985-09-01

Conitr., vol. AC-2S, No. 1, pp. 07-99, Jan. 1083. [481 A. Fettweis, "Digital Circuits and Systems," ZEEE Trans. Circ. and Sys., vol. CAS-31, No. 1, pp...171 J. G. Proakis, Digital Communications, McGraw-Hill, New York, 1983. 1181 P. Monsen, "Adaptive Equalization of the Slow Fading Channel," ZEEE Tran

Run-Off-Road Collision Avoidance Countermeasures Using IVHS Countermeasures Task 1 Vol. 1 Technical Findings

DOT National Transportation Integrated Search

1994-10-28

The Run-Off-Road Collision Avoidance Using IVHS Countermeasures program is to address the single vehicle crash problem through application of technology to prevent and/or reduce the severity of these crashes. This report describes and documents the a...

The Gas Turbine: Technical Terminology Bulletin. Terminotech, Vol. 2, No. 5.

ERIC Educational Resources Information Center

General Electric Co. of Canada, Ltd., Montreal, Quebec.

This issue of a bulletin of technological terminology is devoted to the gas turbine. A brief narrative on the subject is presented in both French and English. An English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended. (JB)

The Steam Turbine: Technical Terminology Bulletin. Terminotech, Vol. 2, No. 4.

ERIC Educational Resources Information Center

General Electric Co. of Canada, Ltd., Montreal, Quebec.

This issue of a bulletin of technological terminology is devoted to the steam turbine. A brief narrative on the subject is presented in both French and English. An English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended. (JB)

Run-Off Road Collision Avoidance Countermeasures Using IVHS Countermeasures Task 1 Vol. 2 Support Volume

DOT National Transportation Integrated Search

1994-10-28

The Run-Off-Road Collision Avoidance Using IVHS Countermeasures program is to address the single vehicle crash problem through application of technology to prevent and/or reduce the severity of these crashes. This report contains a summary of data us...

Interlending and Document Delivery. IATUL Proceedings, Vol. 16.

ERIC Educational Resources Information Center

Fjallbrant, Nancy, Ed.

1984-01-01

This issue of the IATUL (International Association of Technological University Libraries) Proceedings provides an overview of interlending and document delivery in a number of countries. The document comprises: (1) "Interlibrary Lending in the United Kingdom" (Maurice B. Line); (2) "Interlending and Document Delivery in the Federal…

Motor carrier case study evaluation report : appendix C, Vol. 2 : case study field notes, the Crescent Evaluation

DOT National Transportation Integrated Search

1994-02-01

The Crescent Project element of the HELP Program is a bi-national multi-jurisdictional : cooperative research and demonstration initiative involving the public and private sectors in an : application of advanced technologies for the creation of an in...

Development of a New Specification for Aircraft Catapult Lubricant, LA7, NSN 9150-01-430-2884

DTIC Science & Technology

2013-09-30

hours, run at 95C in the presence of water and an iron - copper catalyst. It is mainly used to assess oils used in circulating oil systems. The test is...and an iron -copper catalyst and is terminated when the total acid number reaches a value of 2.0 mg KOH/g with the number of test hours at that point...Tendency/Stability ASTM D 892 Seq. 1 Aerated Vol., mL, Max 50 Vol. after 10 min, mL, Max 0 Seq. II Aerated Vol., mL, Max 50

Assessing Writing Skills

NASA Astrophysics Data System (ADS)

Narayanan, M.

2013-12-01

This is an encore presentation of what was presented at the 2012 AGU International Conference. It was entitled: 'ASSESSING CORE COMPETENCIES.' The poster presentation, however, has been redesigned and reorganized with new, revised perspectives. The importance of ASSESSMENT principles has been emphasized. Catherine Palomba and Trudy Banta offer the following definition of assessment, adapted from one provided by Marchese in 1987. Assessment is the systematic collection, review, and use of information about educational programs undertaken for the purpose of improving student learning and development. (Palomba and Banta 1999). Educational institutions are committing substantial resources to the establishment of dedicated technology-based laboratories, so that they will be able to accommodate and fulfill students' desire to master certain of these specific skills. This type of technology-based instruction may raise some fundamental questions about the core competencies of the student learner. Some of the most important questions are : 1. Is the utilization of these fast high-powered computers and user-friendly software programs creating a totally non-challenging instructional environment for the student learner ? 2. Can technology itself all too easily overshadow the learning outcomes intended ? 3. Are the educational institutions simply training students how to use technology rather than educating them in the appropriate field ? 4. Are we still teaching content-driven courses and analysis oriented subject matter ? 5. Are these sophisticated modern era technologies contributing to a decline in the Critical Thinking Capabilities of the 21st century technology-savvy students ? The author tries to focus on technology as a tool and not on the technology itself. He further argues that students must demonstrate that they have the have the ability to think critically before they make an attempt to use technology in a chosen application-specific environment. The author further argues that training-based instruction has a very narrow focus that puts modern technology at the forefront of the learning enterprise system. The author promotes education-oriented strategies to provide the students with a broader perspective of the subject matter. The author is also of the opinion that students entering the workplace should clearly understand the context in which modern technologies are influencing the productive outcomes of the industrialized world. References : Marchese, T. J. (1987). Third Down, Ten Years to go. AAHE Bulletin, Vol. 40, pages 3-8. Marchese, T. J. (1994). Assessment, Quality and Undergraduate Improvement. Assessment Update, Vol. 6, No. 3. pages 1-14. Montagu, A. S. (2001). High-technology instruction: A framework for teaching computer-based technologies. Journal on Excellence in College Teaching, 12 (1), 109-128. Palomba, Catherine A. and Banta, Trudy W.(1999). Assessment Essentials :Planning, Implementing and Improving Assessment in Higher Education. San Francisco : Jossey Bass Publishers.

Conception de lois de pilotage robustes et sequencement de gains par l'approche de systemes lineaires a parametres variants

NASA Astrophysics Data System (ADS)

Hentabli, Kamel

Cette recherche s'inscrit dans le cadre du projet de recherche Active Control Technology entre l'Ecole de Technologie Superieure et le constructeur Bombardier Aeronautique . Le but est de concevoir des strategies de commandes multivariables et robustes pour des modeles dynamiques d'avions. Ces strategies de commandes devraient assurer a l'avion une haute performance et satisfaire des qualites de vol desirees en l'occurrence, une bonne manoeuvrabilite, de bonnes marges de stabilite et un amortissement des mouvements phugoides et rapides de l'avion. Dans un premier temps, nous nous sommes principalement interesses aux methodes de synthese LTI et plus exactement a l'approche Hinfinity et la mu-synthese. Par la suite, nous avons accorde un interet particulier aux techniques de commande LPV. Pour mener a bien ce travail, nous avons envisage une approche frequentielle, typiquement Hinfinity. Cette approche est particulierement interessante, dans la mesure ou le modele de synthese est construit directement a partir des differentes specifications du cahier des charges. En effet, ces specifications sont traduites sous forme de gabarits frequentiels, correspondant a des ponderations en entree et en sortie que l'on retrouve dans la synthese Hinfinity classique. Par ailleurs, nous avons utilise une representation de type lineaire fractionnelle (LFT), jugee mieux adaptee pour la prise en compte des differents types d'incertitudes, qui peuvent intervenir sur le systeme. De plus, cette representation s'avere tres appropriee pour l'analyse de la robustesse via les outils de la mu-analyse. D'autre part, afin d'optimiser le compromis entre les specifications de robustesse et de performance, nous avons opte pour une structure de commande a 2 degres de liberte avec modele de reference. Enfin, ces techniques sont illustrees sur des applications realistes, demontrant ainsi la pertinence et l'applicabilite de chacune d'elle. Mots cles. Commande de vol, qualites de vol et manoeuvrabilite, commande robuste, approche Hinfinity , mu-synthese, systemes lineaires a parametres variants, sequencement de gains, transformation lineaire fractionnelle, inegalite matricielle lineaire.

Largely enhanced dielectric properties of carbon nanotubes/polyvinylidene fluoride binary nanocomposites by loading a few boron nitride nanosheets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Minhao; Zhao, Hang; He, Delong

2016-08-15

The ternary nanocomposites of boron nitride nanosheets (BNNSs)/carbon nanotubes (CNTs)/polyvinylidene fluoride (PVDF) are fabricated via a combination of solution casting and extrusion-injection processes. The effects of BNNSs on the electrical conductivity, dielectric behavior, and microstructure changes of CNTs/PVDF binary nanocomposites are systematically investigated. A low percolation value (f{sub c}) for the CNTs/PVDF binary system is obtained due to the integration of solution and melting blending procedures. Two kinds of CNTs/PVDF binary systems with various CNTs contents (f{sub CNTs}) as the matrix are discussed. The results reveal that compared with CNTs/PVDF binary systems at the same f{sub CNTs}, the ternary BNNSs/CNTs/PVDFmore » nanocomposites exhibit largely enhanced dielectric properties due to the improvement of the CNTs dispersion state and the conductive network. The dielectric constant of CNTs/PVDF binary nanocomposite with 6 vol. % CNTs (f{sub CNTs} < f{sub c}) shows a 79.59% enhancement from 49 to 88 after the incorporation of 3 vol. % BNNSs. For the other CNTs/PVDF system with 8 vol. % CNTs (f{sub CNTs} > f{sub c}), it displays a 43.32% improvement from 1325 to 1899 after the addition of 3 vol. % BNNSs. The presence of BNNSs facilitates the formation of the denser conductive network. Meanwhile, the ternary BNNSs/CNTs/PVDF systems exhibit a low dielectric loss. The adjustable dielectric properties could be obtained by employing the ternary systems due to the microstructure changes of nanocomposites.« less

Use of Symmetrical Number Systems in Electronic Warfare

DTIC Science & Technology

2013-12-01

National Aerospace and Electronics Conf., pp. 78–84, 2000. [76] C. J. Tarran, “Operational HF DF systems employing real time superresolution process- ing... superresolution algorithms for radio direction finding,” IEEE Trans. Aerosp. Electron. Syst., vol. AES-22, pp. 432–442, Apr. 1986. [78] A. Ferreol and M...S Int. Microwave Symp. Dig., vol. 3, pp. 885–888, 1999. [82] H. L. Levitt, E. M. Alexander, A. Y. Tse, and A. E. Spezio, “ Superresolution precision

Mission Planning Systems for Tactical Aircraft (Pre-Flight and In- Flight) (Systemes de Planification des Missions pour Avions Tactiques (Avant Vol et en Vol)

DTIC Science & Technology

1991-05-01

aspects of planning air interdiction .apability other than reviewing the available maps, photographic missions (e.g., computing fuel and mission time litnes... photographs . FUR or radar pictures of the waypoinis and targets communications. thai allows the mission to be rehearsed. In-flight circumstances are...Planning Aircraft In Flight MPS Geographieal & Meteorological Terrain a Cultural Features Image Data (e.g., Photographic ) Weather Data a Update Data an

Decentralized Stackelberg Strategies for Interconnected Stochastic Dynamic Systems

DTIC Science & Technology

1977-10-01

Solutions" IM, Vol.8, No.6, p.413- 430, 1971. (42) Rhodes, I.B., and Luenberger, D.G., "Differential Games with Imperfect State Information", E Trans...34, Proc. Systems E for Power, ERDA Conf. Henniker, New Hampshire, 1975. [47) Starr, A.W., and Ho, Y.C., "Nonzero-Sum Differential Games ", Jt_., [ Vol.3, p...CONTROLLING OFFICE NAME AND ADDRESS 12. REPORT DATE October, 1977 Joint Services Electronics Program ,3. NUMSEROWPAGES 97 14. MONITORiNG &GENCY NAME 1

NLC Newsletter

Science.gov Websites

November 2003 Vol. 4 No. 10 - 11 September 2003 Vol. 4 No. 9 August 2003 Vol.4 No. 8 July 2003 Vol.4 No. 7 Vol. 3 No. 9 August 2002 Vol. 3 No. 8 July 2002 Vol. 3 No. 7 June 2002 Vol. 3 No. 6 May 2002 Vol. 3 No . 2 No.10 August 2001 Vol. 2 No. 4 March 2001 Vol. 2 No. 3 February 2001 Vol. 2 No. 2 January 2001 Vol

Robust Modulo Remaindering and Applications in Radar and Sensor Signal Processing

DTIC Science & Technology

2015-08-27

Chinese Remainder Theorem in FDD Systems, Science China -- Information Sciences, vol.55, no.7, pp. 1605 -1616, July 2012. 3) Y. Liu, X.-G. Xia, and H. L...Sciences, vol.55, no.7, pp. 1605 -1616, July 2012. 3) Y. Liu, X.-G. Xia, and H. L. Zhang, Distributed Space-Time Coding for Full-DuplexAsynchronous

INSTRUMENTATION FOR INSTRUCTION, 1955-70, VOL. 1--TEXT.

ERIC Educational Resources Information Center

FINN, JAMES D.; PERRIN, DONALD G.

THE ROLE OF EQUIPMENT IN THE NEW TECHNOLOGIES OF INSTRUCTION WAS EXPLORED. PROJECTION EQUIPMENT DEVELOPED SINCE 1955 AS WELL AS CONCEPTS OF PLANNING, FINANCING, AND ADMINISTRATION WERE DISCUSSED. EXAMPLES OF POST-1955 IMPROVEMENTS INCLUDED (1) INCREASED LIGHT OUTPUT DUE TO NEW LIGHT SOURCES AND IMPROVED OPTICS, (2) INCREASED EASE OF OPERATION…

Hydraulic Turbines: The Francis Turbine. Technical Terminology Bulletin. Terminotech, Vol. 2, No. 2.

ERIC Educational Resources Information Center

General Electric Co. of Canada, Ltd., Montreal, Quebec.

This issue of a bulletin of technological terminology is devoted to the Francis turbine. A brief narrative on the subject is presented in both French and English. An English-French dictionary of terms comprises the bulk of the document. An explanatory illustration is appended. (JB)

Hydraulic Turbines: The Pelton Turbine. Technical Terminology Bulletin. Terminotech, Vol. 2, No. 3.

ERIC Educational Resources Information Center

General Electric Co. of Canada, Ltd., Montreal, Quebec.

This issue of a bulletin of technological terminology is devoted to the Pelton turbine. A brief narrative on the subject is presented in both French and English. An English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended. (JB)

Radiation effects and tritium technology for fusion reactors. Volume I. Proceedings of the international conference, Gatlinburg, Tennessee, October 1--3, 1975

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watson, J.S.; Wiffen, F.W.; Bishop, J.L.

1976-03-01

Separate abstracts were prepared for the 29 included papers in Vol. I. The topics covered in this volume include swelling and microstructures in thermonuclear reactor materials. Some papers on modeling and damage analysis are included. (MOW)

Recreation and Natural Area Needs Assessment (GREAT III)

DTIC Science & Technology

1982-01-01

1970 The Pennsylvania State University: Research and Computer Technician for Dr. E. L. Bergman, Department of Horticulture . Education B.S. The...Publication 1974 Becker, R. H. and R. 0. Ray. "Accessibility: An Application of the New Technology." Therapeutic Recreation Journal, Vol. 8, No. 4. 1976 Becker

Al-Manakh. Language Centre Journal, Vol. 3, No. 2.

ERIC Educational Resources Information Center

Language Centre Journal, 1979

1979-01-01

The following articles appear in this issue of a journal devoted to teaching English for science and technology in Kuwait: (1) "An Approach to the Implementation of Dr. J.L. Munby's 'Communicative Syllabus Design'" by Bill Robinson, (2) "Une experience d'elaboration de materiel pedagogique" (An Experiment in Developing Teaching…

The Economics of Industrial Preparedness Planning and Raw Materials Stockpiling

DTIC Science & Technology

1982-05-01

concepts are sketched on page 6. Chapter II 1. Marshall, Alfred, Principles of Economics , Guillebaud ed., pages 330, 465, 366, 372, 374, and 377. 2... Principles of Economics , Guillebaud Edition, Vol. 1. New York: The MacMillan Co, 1961. Martino, Joseph P., Technological Forecasting For Decision- making

Heating Efficiency of Beat Wave Excitation in a Density Gradient,

DTIC Science & Technology

1988-02-01

and Technology, January 1988. PPG-1124 񓟣 Research Highlights in The Pisces Program," R.V. Conn, et al, January 1988. PPG-1125 "Magnetic Fusion ... Energy , vol. 5. Technical Assessement of Critical Issues in the Steady State Operation of Fusion Confinement Devices," D. M. Goebel, Assessment Chairman

Net Shape Technology in Aerospace Structures. Volume 1.

DTIC Science & Technology

1986-11-01

ofI nIo n- destructive evaluation methods, such a s ult rasonic inspection, in detecting otherwise hidden defects in parts made of the material. Pratt...SCHEDULE 4. PERFORMING ORGANIZATION REPORT NUMBER( S ) 5. MONITORING ORGANIZATION REPORT NUMBER( S ) n/a n/a 6a. NAME OF PERFORMING ORGANIZATION 6b...a n/a n/a 11 TITLE (Include Security Classification) Net Shape Technology in Aerospace Structures, Vol. I (U) 12. PERSONAL AUTHOR( S ) 13a. TYPE OF

Analyzing the Effects of Technological Change: A Computable General Equilibrium Approach

DTIC Science & Technology

1988-09-01

to obtain. One way out of this dilemma is to change slightly the interpretation of the formal model of consumer behavior which has been presented above...approach to analyzing the economy-wide effects of a phenomenon such as technological change. By focussing on aggregate producer and consumer behavior , it is... Consumer Behavior ." In R.L. Baseman and G. Rhodes, eds., Advances in Econometrics, vol. 1. Greenwich: JAI Press, 1982. Nagurney [1987] Nagurney, A

Defense AT and L Magazine. Vol. 46, no. 3, May-June 2017

DTIC Science & Technology

2017-05-01

rated lithium - ion rechargeable batteries , providing 150 Watt hours for up to 36 hours at a weight of 1.18 kilograms (2.6 pounds), are built in a...and post- lithium batteries , might meet or exceed the current government requirement. There are obvi- ous technical performance objectives in this...rechargeable batteries to power the technology that dismounted troops carry into battle. A quick summary of the current, proven technology is that ballistic

Tubular system volume changes in twitch fibres from toad and rat skeletal muscle assessed by confocal microscopy

PubMed Central

Launikonis, Bradley S; Stephenson, D George

2002-01-01

The volume of the extracellular compartment (tubular system) within intact muscle fibres from cane toad and rat was measured under various conditions using confocal microscopy. Under physiological conditions at rest, the fractional volume of the tubular system (t-sysVol) was 1.38 ± 0.09 % (n = 17), 1.41 ± 0.09 % (n = 12) and 0.83 ± 0.07 % (n = 12) of the total fibre volume in the twitch fibres from toad iliofibularis muscle, rat extensor digitorum longus muscle and rat soleus muscle, respectively. In toad muscle fibres, the t-sysVol decreased by 30 % when the tubular system was fully depolarized and decreased by 15 % when membrane cholesterol was depleted from the tubular system with methyl-β-cyclodextrin but did not change as the sarcomere length was changed from 1.93 to 3.30 μm. There was also an increase by 30 % and a decrease by 25 % in t-sysVol when toad fibres were equilibrated in solutions that were 2.5-fold hypertonic and 50 % hypotonic, respectively. When the changes in total fibre volume were taken into consideration, the t-sysVol expressed as a percentage of the isotonic fibre volume did actually decrease as tonicity increased, revealing that the tubular system in intact fibres cannot be compressed below 0.9 % of the isotonic fibre volume. The results can be explained in terms of forces acting at the level of the tubular wall. These observations have important physiological implications showing that the tubular system is a dynamic membrane structure capable of changing its volume in response to the membrane potential, cholesterol depletion and osmotic stress but not when the sarcomere length is changed in resting muscle. PMID:11790823

Report from International Lunar Exploration Working Group (ILEWG) to COSPAR

NASA Astrophysics Data System (ADS)

Foing, Bernard H.

We refer to COSPAR and ILEWG ICEUM and lunar conferences and declarations [1-18]. We discuss how lunar missions SMART-1, Kaguya, Chang'E1&2, Chandrayaan-1, LCROSS, LRO, GRAIL, LADEE, Chang'E3 and upcoming missions contribute to lunar exploration objectives & roadmap. We present the GLUC/ICEUM11 declaration and give a report on ongoing relevant ILEWG community activities, with focus on: “1. Science and exploration - World-wide access to raw and derived (geophysical units) data products using consistent formats and coordinate systems will maximize return on investment. We call to develop and implement plans for generation, validation, and release of these data products. Data should be made available for scientific analysis and supporting the development and planning of future missions - There are still Outstanding Questions: Structure and composition of crust, mantle, and core and implications for the origin and evolution of the Earth-Moon system; Timing, origin, and consequences of late heavy bombardment; Impact processes and regolith evolution; Nature and origin of volatile emplacement; Implications for resource utilization. These questions require international cooperation and sharing of results in order to be answered in a cost-effective manner - Ground truth information on the lunar far side is missing and needed to address many important scientific questions, e.g. with a sample return from South Pole-Aitken Basin - Knowledge of the interior is poor relative to the surface, and is needed to address a number of key questions, e.g. with International Lunar Network for seismometry and other geophysical measurements - Lunar missions will be driven by exploration, resource utilization, and science; we should consider minimum science payload for every mission, e.g., landers and rovers should carry instruments to determine surface composition and mineralogy - It is felt important to have a shared database about previous missions available for free, so as to provide inputs to future missions, including a gap analysis of needed measurements. Highly resolved global data sets are required. Autonomous landing and hazard avoidance will depend on the best topographic map of the Moon, achievable by combining shared data. - New topics such as life sciences, partial gravity processes on the Moon should be followed in relation to future exploration needs.” http://sci.esa.int/ilewg/ http://sci.esa.int/ilewg/47170-gluc-iceum11-beijing-2010lunar-declaration/ References: [1] 1st International Lunar Workshop, Balsiger H. et al., Editors, European Space Agency, 1994. ESA-SP-1170. [2] 2nd International Lunar Workshop, Kyoto, H. Mizutani, editor, Japan Space Forum Publisher, 1997. [3] 3rd International Lunar Workshop, Moscow 1998, E. Galimov, editor. [4] ICEUM4, ESTEC, 2000, ESA SP-462, B.H. Foing & M. Perry, editors. [5] ICEUM5, Hawaii Nov 2003, Durst S.M. et al, Editors, Vol 108, 1-576 pp, Science and Technology Series, American Astronautical Society, 2004. [6] ICEUM6, Udaipur 2004, Bhandari N., Editor, Journal Earth Sys-tem Science, India, 114, No6, Dec 2005, pp. 573-841. [7] ICEUM7, Toronto Sept 2005, sci.esa.int/ilewg. [8] ICEUM8, Beijing July 2006, Journal of Chinese Society of Astronautics, Vol. 28 Sup., 2007, Ji W., Editor. [9] ICEUM9, Sorrento, Italy, Foing B., Espinasse S., Kosters G., Editors. http://sci.esa.int/iceum9, Dec. 2007), [11] Ehrenfreund, P., Foing, B.H., Cellino, A. Editors, The Moon and Near Earth Objects, ASR Vol 37, 1, 2006. [12] Foing, B.H. et al editors, 'Astronomy and Space Science from the Moon', ASR 14, 6, 1994. [13] Ip W.-H., Foing, B.H., Masson Ph.L., editors, The Moon and Mars, ASR Vol 23, 11, 1999. [14] Foing, B.H. et al, editor, Lunar Exploration, Planetary and Space Science, Vol 50, 14-15, 2002. [15] Foing, B.H., Heather, D. editors, 'Lunar Exploration 2000', ASR Vol 30, Nr 8, 2002. [16] Huntress, W. et al 'The next steps in exploring deep space - A cosmic study by the IAA', Acta Astronautica, Vol 58, Issues 6-7, 2006, p302-377. [17] http://sci.esa.int/ilewg/43654-declaration-iceum10-leag-srr-florida-2008/ [18] Ehrenfreund P. et al (COSPAR planetary exploration panel report) 2012, ASR Vol 49, Nr 1, pp. 2-48.

Stationary table CT dosimetry and anomalous scanner-reported values of CTDI{sub vol}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dixon, Robert L., E-mail: rdixon@wfubmc.edu; Boone, John M.

2014-01-15

Purpose: Anomalous, scanner-reported values of CTDI{sub vol} for stationary phantom/table protocols (having elevated values of CTDI{sub vol} over 300% higher than the actual dose to the phantom) have been observed; which are well-beyond the typical accuracy expected of CTDI{sub vol} as a phantom dose. Recognition of these outliers as “bad data” is important to users of CT dose index tracking systems (e.g., ACR DIR), and a method for recognition and correction is provided. Methods: Rigorous methods and equations are presented which describe the dose distributions for stationary-table CT. A comparison with formulae for scanner-reported values of CTDI{sub vol} clearly identifiesmore » the source of these anomalies. Results: For the stationary table, use of the CTDI{sub 100} formula (applicable to a moving phantom only) overestimates the dose due to extra scatter and also includes an overbeaming correction, both of which are nonexistent when the phantom (or patient) is held stationary. The reported DLP remains robust for the stationary phantom. Conclusions: The CTDI-paradigm does not apply in the case of a stationary phantom and simpler nonintegral equations suffice. A method of correction of the currently reported CTDI{sub vol} using the approach-to-equilibrium formula H(a) and an overbeaming correction factor serves to scale the reported CTDI{sub vol} values to more accurate levels for stationary-table CT, as well as serving as an indicator in the detection of “bad data.”.« less

Reduction of hard-tissue debris accumulation during rotary root canal instrumentation by etidronic acid in a sodium hypochlorite irrigant.

PubMed

Paqué, Frank; Rechenberg, Dan-Krister; Zehnder, Matthias

2012-05-01

Hard-tissue debris is accumulated during rotary instrumentation. This study investigated to what extent a calcium-complexing agent that has good short-term compatibility with sodium hypochlorite (NaOCl) could reduce debris accumulation when applied in an all-in-one irrigant during root canal instrumentation. Sixty extracted mandibular molars with isthmuses in the mesial root canal system were selected based on prescans using a micro-computed tomography system. Thirty teeth each were randomly assigned to be instrumented with a rotary system and irrigated with either 2.5% NaOCl or 2.5% NaOCl containing 9% (wt/vol) etidronic acid (HEBP). Using a side-vented irrigating tip, 2 mL of irrigant was applied by 1 blinded investigator to the mesial canals after each instrument. Five milliliters of irrigant was applied per canal as the final rinse. Mesial root canal systems were scanned at high resolution before and after treatment, and accumulated hard-tissue debris was calculated as vol% of the original canal anatomy. Values between groups were compared using the Student's t test (α < .05). Irrigation with 2.5% NaOCl resulted in 5.5 ± 3.6 vol% accumulated hard-tissue debris compared with 3.8 ± 1.8 vol% when HEBP was contained in the irrigant (P < .05). A hypochlorite-compatible chelator can reduce but not completely prevent hard-tissue debris accumulation during rotary root canal instrumentation. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

The Science of and Advanced Technology for Cost-Effective Manufacture of High Precision Engineering Products. Volume 5. Automatic Generation of Process Outlines of Forming and Machining Processes.

DTIC Science & Technology

1986-08-01

THE SCIENCE OF AND ADVANCED TECHNOLOGY FOR COST-EFFECTIVE MANUFACTURE Lfl OF HIGH PRECISION ENGINEERING PRODUCTS N iA6/*N ONR Contract No. 83K0385...ADVANCED TECHNOLOGY FOR1 COST-EFFECTIVE MANUFACTURE OF1’ HIGH PRECISION ENGINEERING PRODUCTS ONR Contract No. 83K0385 Final Report Vol. 5 AUTOMATIC...Ck 53N Drawing #: 03116-6233 Raw Material: Iiz’ 500mm diameter and 3000mm length Ma, rial Alloy steel. high carbon content, quenched to Min 45Rc

New three-phase polymer-ceramic composite materials for miniaturized microwave antennas

NASA Astrophysics Data System (ADS)

Zhang, Li; Zhang, Jie; Yue, Zhenxing; Li, Longtu

2016-09-01

Unique polymer-ceramic composites for microwave antenna applications were prepared via melt extrusion using high-density polyethylene (HDPE) as the matrix and low-density polyethylene (LDPE) coated BaO-Nd2O3-TiO2 (BNT) ceramic-powders as the filler. By incorporating LDPE into the composites via a coating route, high ceramic-powder volume content (up to 50 vol%) could be achieved. The composites exhibited good microwave dielectric and thermomechanical behaviors. As BNT ceramic content increased from 10 vol% to 50 vol%, the permittivity of the composites increased from 3.45 (9 GHz) to 11.87 (7 GHz), while the dielectric loss remained lower than 0.0016. Microstrip antennas for applications in global positioning systems (GPS) were designed and fabricated from the composites containing 50 vol% BNT ceramics. The results indicate that the composites that have suitable permittivity and low dielectric loss are promising candidates for applications in miniaturized microwave devices, such as antennas.

Fuel-Cell-Powered Vehicle with Hybrid Power Management

NASA Technical Reports Server (NTRS)

Eichenberg, Dennis J.

2010-01-01

Figure 1 depicts a hybrid electric utility vehicle that is powered by hydrogenburning proton-exchange-membrane (PEM) fuel cells operating in conjunction with a metal hydride hydrogen-storage unit. Unlike conventional hybrid electric vehicles, this vehicle utilizes ultracapacitors, rather than batteries, for storing electric energy. This vehicle is a product of continuing efforts to develop the technological discipline known as hybrid power management (HPM), which is oriented toward integration of diverse electric energy-generating, energy-storing, and energy- consuming devices in optimal configurations. Instances of HPM were reported in five prior NASA Tech Briefs articles, though not explicitly labeled as HPM in the first three articles: "Ultracapacitors Store Energy in a Hybrid Electric Vehicle" (LEW-16876), Vol. 24, No. 4 (April 2000), page 63; "Photovoltaic Power Station With Ultracapacitors for Storage" (LEW- 17177), Vol. 27, No. 8 (August 2003), page 38; "Flasher Powered by Photovoltaic Cells and Ultracapacitors" (LEW-17246), Vol. 27, No. 10 (October 2003), page 37; "Hybrid Power Management" (LEW-17520), Vol. 29, No. 12 (December 2005), page 35; and "Ultracapacitor-Powered Cordless Drill" (LEW-18116-1), Vol. 31, No. 8 (August 2007), page 34. To recapitulate from the cited prior articles: The use of ultracapacitors as energy- storage devices lies at the heart of HPM. An ultracapacitor is an electrochemical energy-storage device, but unlike in a conventional rechargeable electrochemical cell or battery, chemical reactions do not take place during operation. Instead, energy is stored electrostatically at an electrode/electrolyte interface. The capacitance per unit volume of an ultracapacitor is much greater than that of a conventional capacitor because its electrodes have much greater surface area per unit volume and the separation between the electrodes is much smaller.

Proceedings of the Thirteenth Symposium on Naval Hydrodynamics Held at Tokyo (Japan) on October 6-10 1980

DTIC Science & Technology

1981-01-01

sciences, material sciences, and ocean University of Tokyo, and his many able and science and technology . dedicated co-workers, in organizing this meeting...occasion. Since our Symposia concerning hydro- us to ease this section and gastronomy such as this dynamics or naval science took place in Tokyo, I buffet...Houten, R.J., Unpublished, 1978. 6. Van Oossanen, P., "Theoretical 6. CONCLUSION Prediction of Cavitation of Propellers,"Marine Technology , Vol. 14, No

Synthesis of ceramic-based porous gradient structures for applications in energy conversion and related fields

NASA Astrophysics Data System (ADS)

Graule, Thomas; Ozog, Paulina; Durif, Caroline; Wilkens-Heinecke, Judit; Kata, Dariusz

2016-06-01

Porous, graded ceramic structures are of high relevance in the field of energy conversion as well as in catalysis, and additionally in filtration technology and in biomedical applications. Among different technologies for the tailored design for such structures we demonstrate here a new environmental friendly UV curing-based concept to prepare laminated structures with pore sizes ranging from a few microns up to 50 microns in diameter and with porosities ranging from 10% up to 75 vol.% porosity.

Proceedings of the Tenth Annual National Conference on Ada Technology. Held in Arlington, VA, on February 24-28, 1992

DTIC Science & Technology

1992-02-01

Newsletter, Vol. 5, No. 1, January 1983 be translated from HAL’S. 4. Klumpp, Allan R., An Ada Linear Algebra Software development costs for using the...a linear algebra approach to As noted above, the concept of the problem and address the problem of unitdimensional analysis extends beyond problems...you will join us again next year. The 11th Annual Conference on Ada Technology (1993) will be held here at the Hyatt Regency - Crystal City

Crystal-rich lava dome extrusion during vesiculation: an experimental study

NASA Astrophysics Data System (ADS)

Pistone, M.; Whittington, A. G.; Andrews, B. J.; Cottrell, E.

2016-12-01

Lava dome-forming eruptions represent a common eruptive style and a major hazard on numerous active volcanoes worldwide. The influence of volatiles on the rheological mechanics of lava dome extrusion remains unclear. Here we present new experimental results on the rheology of synthesized, crystal-rich (50 to 80 vol% quartz crystals), hydrous (4.2 wt% H2O in the glass) dacites, which vesiculate from 5 to 27 vol% gas bubbles at high temperatures (483 to 797 °C) during deformation conducted in a parallel plate viscometer (constant stress at 0.64 MPa, and variable strain-rates ranging from 8.32•10-8 to 3.58•10-5 s-1). The experiments replicated lava dome deformation in volcanic conduits during vesiculation of the residual melt, instigated in the experiments by increasing temperature. During gas exsolution we find that the rheological lubrication of the system during deformation is strongly dictated by the imposed initial crystallinity. At low crystal content (< 60 vol%) strain localization within shear bands, composed of melt and gas bubbles that likely interconnect, controls the overall sample rheology. At high crystallinity (60 to 70 vol%) gas pressurization (i.e. pore pressure increase) within crystal clusters and embryonic formation of microscopic fractures drive the system to a brittle behavior. At higher crystallinity (80 vol%) gas pressurization triggers brittle fragmentation through macroscopic fractures, which sustain outgassing and determines the viscous death of the system. The contrasting behaviors at different crystallinities have direct impact on the style of volcanic eruptions. Outgassing induced by deformation and bubble coalescence reduces the system pressurization and the potential for an explosive eruption. Conversely, high crystallinity lava domes experience limited loss of exsolved gas during deformation, permitting the achievement of large overpressures prior to fragmentation, favoring likely explosive eruptions. These findings provide a dataset that might be used to constrain the physical properties of natural lava domes at active volcanoes and show how crystallinity and corresponding gas pressurization control dome growth rate and consequent eruption style.

Assessing Core Competencies

NASA Astrophysics Data System (ADS)

Narayanan, M.

2004-12-01

Catherine Palomba and Trudy Banta offer the following definition of assessment, adapted from one provided by Marches in 1987. Assessment in the systematic collection, review, and use of information about educational programs undertaken for the purpose of improving student learning and development. (Palomba and Banta 1999). It is widely recognized that sophisticated computing technologies are becoming a key element in today's classroom instructional techniques. Regardless, the Professor must be held responsible for creating an instructional environment in which the technology actually supplements learning outcomes of the students. Almost all academic disciplines have found a niche for computer-based instruction in their respective professional domain. In many cases, it is viewed as an essential and integral part of the educational process. Educational institutions are committing substantial resources to the establishment of dedicated technology-based laboratories, so that they will be able to accommodate and fulfill students' desire to master certain of these specific skills. This type of technology-based instruction may raise some fundamental questions about the core competencies of the student learner. Some of the most important questions are : 1. Is the utilization of these fast high-powered computers and user-friendly software programs creating a totally non-challenging instructional environment for the student learner ? 2. Can technology itself all too easily overshadow the learning outcomes intended ? 3. Are the educational institutions simply training students how to use technology rather than educating them in the appropriate field ? 4. Are we still teaching content-driven courses and analysis oriented subject matter ? 5. Are these sophisticated modern era technologies contributing to a decline in the Critical Thinking Capabilities of the 21st century technology-savvy students ? The author tries to focus on technology as a tool and not on the technology itself. He further argues that students must demonstrate that they have the have the ability to think critically before they make an attempt to use technology in a chosen application-specific environment. The author further argues that training-based instruction has a very narrow focus that puts modern technology at the forefront of the learning enterprise system. The author promotes education-oriented strategies to provide the students with a broader perspective of the subject matter. The author is also of the opinion that students entering the workplace should clearly understand the context in which modern technologies are influencing the productive outcomes of the industrialized world. References : Marchese, T. J. (1987). Third Down, Ten Years to go. AAHE Bulletin, Vol. 40, pages 3-8. Marchese, T. J. (1994). Assessment, Quality and Undergraduate Improvement. Assessment Update, Vol. 6, No. 3. pages 1-14. Montagu, A. S. (2001). High-technology instruction: A framework for teaching computer-based technologies. Journal on Excellence in College Teaching, 12 (1), 109-128. Palomba, Catherine A. and Banta, Trudy W.(1999). Assessment Essentials :Planning, Implementing and Improving Assessment in Higher Education. San Francisco : Jossey Bass Publishers.

Study of Strongly Coupled Systems via Probe Brane Constructions

NASA Astrophysics Data System (ADS)

Chang, Han-Chih

In this thesis, we present our study towards better understanding of the strongly coupled systems with extra matter content in the fundamental representation of some prescribed global symmetry group in the quenched approximation, with the toolkit of holography via a probe brane construction. Specically, for the defect conformal systems, we unearth and quantify the phase trasition diagram, and novel supersymmetric vacua in the top-down model of the D3/D5 probe brane system. For further quantify various non-Fermi quantum liquid phases realized through the holographical probe brane construction, we then propose and verify the method to include the backreaction of entanglement entropy due to the probe branes at the leading order, which can potentially be used to detect topological phase transitions. We will recapitulate the main results of our works, in collaboration with Prof. Andreas Karch, published in the following journals: "Minimal Submanifolds asymptotic to AdS4 xS2 in AdS5xS5', JHEP, vol.1404, p.037, 2014; "The Novel Solutions of Finite-Density D3/D5 Probe Brane System and Their Implications for Stability'', JHEP, vol.1210, p.060, 2014; "Entanglement Entropy for Probe Branes'', JHEP, vol.1401, p.180, 2014.

Issues in the Convergence of Control with Communication and Computation

DTIC Science & Technology

2004-10-04

Library/Upload/116/Cal1.doc. [42] M. H. Shwehdi and A. Z. Khan, “A power line data communication interface using spread spectrum technology in home ... automation ,” IEEE Transactions on Power Delivery, vol. 11, pp. 1232–1237, July 1996. ISSN: 0885-8977. [43] R. G. Olsen, “Technical considerations for

Development of a Design Technology for Ground Support for Tunnels in Soil : Vol. II. Three Dimensional Finite Element Analysis of Advanced and Conventional Shield Tunneling

DOT National Transportation Integrated Search

1983-11-01

The report presents design recommendations for concrete tunnel linings for transportation tunnels. The recommendations developed as a result of in-depth analysis and model testing of the behavior of concrete tunnel linings. The research addressed pro...

High Density Ion Implanted Contiguous Disk Bubble Technology

DTIC Science & Technology

1989-03-31

Annealing," J. Appl. Phys., Vol. 43, No. 6, June, 1972, pp. 2883-2885. (4.14] P. Roschmann , W. Tolksdorf, and F. Welz, "Annealing Effects on Cation...706.I I * 57 [4.15] P. Roschmann , "Redistribution Kinetics of Ga and Al Substitutions in Yttrium Iron Garnet," Journal of Magnetism and Magnetic

Clean Cities Now, Vol. 18, No. 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2015-01-19

This is version 18.2 of Clean Cities Now, the official biannual newsletter of the Clean Cities program. Clean Cities is an initiative designed to reduce petroleum consumption in the transportation sector by advancing the use of alternative and renewable fuels, fuel economy improvements, idle-reduction measures, and new technologies, as they emerge.

JPRS Report, Science & Technology, USSR: Chemistry

DTIC Science & Technology

1989-07-20

derivatives of arsenic, the sure to hydrochloric acid , with the latter reaction appar- authors synthesized for the first time aryl diethyinyl ently...1 Study of Methyltrichlorogermanium Chlorination Initiated With Laser Radiation [G. Ya... Acids in Esterification of Butyric Acid [N. P. Zhiltsov, N. G. Tazimova, et al.; UKRAINSKIY KHIMICHESKIY ZHURNAL, Vol 55 N o 1, Jan 89

Surface Excrescence Transition Study Delivery Order 0053

DTIC Science & Technology

2009-04-01

located near the town of Hyuga). The facility was constructed on a former MAGLEV testing track owned by Railway Technical Research Institute of Japan 6...12pp) 6. Takahashi, K., ―The outline of MLU002N on Miyazaki test track,‖ Int. Conf. on Speedup Technology for Railway and MAGLEV Vehicles vol 1 pp

Microelectronic Precision Optical Element Fabrication

DTIC Science & Technology

2009-01-01

spectra for a 0-25V reverse bias and the device tilted at -35° to the optical axis. Also shown is the diode reverse bias I-V curve . 1530 1540...optical modulator using an MEMS deformable micromirror array," Journal of Lightwave Technology, vol. 24(1), pp. 516-525, January 2006. [4] D. H. Parker, M

Identifying Needs and Setting Goals. The ACTFL Foreign Language Education Series, Vol. 10.

ERIC Educational Resources Information Center

Medley, Frank W., Jr.

The teaching of foreign languages, like other subjects in the curriculum, must change to incorporate the strategies and technologies which evolve from a new perspective of materials and methods. Accordingly, several reasons are suggested for a systematic approach to constructive chanqe. Needs assessment, a process comprised of a series of…

Long Life MEM Switch Technology

DTIC Science & Technology

2006-05-23

Dussopt et al. on the two-level switched-capacitors [2], Peroulis et al. on the extended analog varactor [3], B- Kassem at el. on an extended range analog...Katehi, ”Highly reliable analog MEMS varactors,” 2004 IEEE MTT-S Int. Microwave Symp. Dig., vol. 2, pp. 869-872, June 2004. [4] M. Bakri- Kassem , R. R

PREVENTION REFERENCE MANUAL: CONTROL TECHNOLOGIES, VOL. 2. POST-RELEASE MITIGATION MEASURES FOR CONTROLLING ACCIDENTAL RELEASES OF AIR TOXICS

EPA Science Inventory

The volume discusses prevention and protection measures for controlling accidental releases of air toxics. The probability of accidental releases depends on the extent to which deviations (in magnitude and duration) in the process can be tolerated before a loss of chemical contai...

Operational Maneuver and Fires: A Role for Naval Forces in Land Operations

DTIC Science & Technology

1989-05-15

34 Military Review, (February 1983), 13-34. Drury , M.T., "Naval Strike Warfare and the Outer Battle." Naval Forces, Vol.VII, (1986), 46-49. Fedyszn...Fort Leavenworth, KS., June 1987. Martin, Cormander Colin L., "Tomahawk Technology and the Maritime Strategy." Paper, Naval War College, Newport, RI

Development of a Design Technology for Ground Support for Tunnels in Soil : Vol. III. Observed Behavior of an Earth Pressure Balance Shield in San Francisco Bay Mud

DOT National Transportation Integrated Search

1983-02-01

The report presents design recommendations for concrete tunnel linings for transportation tunnels. The recommendations developed as a result of in-depth analysis and model testing of the behavior of concrete tunnel linings. The research addressed pro...

Development of a Design Technology for Ground Support for Tunnels in Soil : Vol. I. Time Dependent Response Due to Consolidation in Clays

DOT National Transportation Integrated Search

1983-02-01

The report presents an investigation of the phenomenon of tunnel related movements, due to consolidation in clayey or silty soils, as a result of dissipation of excess pore pressures induced during construction. A review of field data showing time de...

Multi-Scale Behavioral Modeling and Analysis Promoting a Fundamental Understanding of Agent-Based System Design and Operation

DTIC Science & Technology

2007-03-01

Chains," Mathematics of Control, Signals, and Systems, vol. 3(1), pp. 1-29, 1990. [4] A . Arnold, J . A . Carrillo, and I. Gamba, "Low and High Field...Aronson, C. L. A ., and J . L. Vázquez, "Interfaces with a corner point in one- dimensional porous medium flow," Comm. Pure Appl. Math, vol. 38(4), pp. 375...K. Levin, "Damage analysis of fiber composites," Computer Methods in Applied Mechanics and Engineering. [10] K. S. Barber, A . Goel, T. J . Graser, T

The Influence of Phenocrysts on Magma Degassing in Rhyolitic Systems

NASA Astrophysics Data System (ADS)

deGraffenried, R.; Larsen, J. F.; Lindoo, A. N.

2016-12-01

The kinetics of volatile exsolution and magma degassing control volcanic eruption styles, but the role of phenocrysts in the degassing process is poorly understood. The focus of this study is two series of decompression experiments examining how phenocrysts may or may not influence vesicle structures leading to permeability development and degassing in magmas with rhyolitic matrix melts. Powdered rhyolite obsidian (75 SiO2 wt. %; Mono Craters, CA) was seeded with 20 and 40 vol. % euhedral corundum crystals (350 μm) to approximate phenocrysts. Experiments were run using TZM (Ti-Zr-Mo alloy) vessels fitted with a water-cooled rapid quench top in a vertical Deltech furnace. Each run was held at 110 MPa and 900OC for 24 hours then decompressed continuously at a rate of 0.25 MPa/s to a final pressure (Pf) between 75 and 15 MPa. Permeability was measured using a bench-top permeameter constructed for the small experimental samples. Porosity was obtained from reflected light images using NIH Image J. The porosity of the samples increased from 11.0±1.7 to 73.3±3.1 vol % at Pf of 75 to 15 MPa for crystal free samples, 30.1±6.9 to 62.2±2.6 vol % at Pf of of 75 to 25 MPa for 20 vol % crystal samples, and 13.3±2.5 to 41.2±9.6 vol % at Pf of 75 to 50 MPa for 40 vol % crystal samples. The 20 vol % samples are impermeable up to at least 50 MPa Pf. The 40 vol % samples are impermeable up to 25 MPa Pf, with one sample having a measured Darcian permeability of -13.93±0.05 m2 at 25 MPa Pf. Comparatively, the crystal free samples were mostly impermeable up to 15 MPa, with one sample having a measured Darcian permeability of -14.41±0.04 m2 at 15 MPa Pf and 73.3 vol % porosity. Although preliminary, our permeable 40 vol % experiment suggests the phenocrysts help the samples develop permeability at a higher ending pressure and potentially lower porosity. Differences in the porosity curve as a function of pressure between the 20 and 40 vol % series indicate phenocrysts influence the vesicle structures in ascending magmas.

Architectures and Applications for Scalable Quantum Information Systems

DTIC Science & Technology

2007-01-01

quantum computation models, such as adiabatic quantum computing , can be converted to quantum circuits. Therefore, in our design flow’s first phase...vol. 26, no. 5, pp. 1484–1509, 1997. [19] A. Childs, E. Farhi, and J. Preskill, “Robustness of adiabatic quantum computation ,” Phys. Rev. A, vol. 65...magnetic resonance computer with three quantum bits that simulates an adiabatic quantum optimization algorithm. Adiabatic

Summary of Research 1992

DTIC Science & Technology

1992-12-01

Tutorial on Their Data Sharing," The International Journal on Very Large Data Bases (VLDB Journal ), Vol. 1, No. 1, July 1992. Hsiao, D. K., "Federated...Databases and Systems: A Tutorial on Their Resource Consolidation," The International Journal on Very Large Data Bases (VLDB Journal ), Vol. 1, No. 2...Game: Normal Approximation," accepted extensions of games and considers for publication by International possible applications. Journal of Game Theory

Novel Routes for Sintering of Ultra-high Temperature Ceramics and their Properties

DTIC Science & Technology

2014-10-31

H. Gocmez, Hydrothermal synthesis and properties of Ce1-xGdxO2-δ solid solutions // Solid State Sciences. – 2002. – Vol. 4. – P. 585-590. 19. E...J. Kilner, Ionic conductivity in the CeO2-Gd2O3 system (0.05≤Gd/Ce≤0.4) prepared by oxalate coprecipitation // Solid State Ionics. - 2002. – Vol

Highly-Efficient and Modular Medium-Voltage Converters

DTIC Science & Technology

2015-09-28

HVDC modular multilevel converter in decoupled double synchronous reference frame for voltage oscillation reduction," IEEE Trans. Ind...Electron., vol. 29, pp. 77-88, Jan 2014. [10] M. Guan and Z. Xu, "Modeling and control of a modular multilevel converter -based HVDC system under...34 Modular multilevel converter design for VSC HVDC applications," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 3, pp.

A New Social Contract for Geophysics

NASA Astrophysics Data System (ADS)

Malone, T. F.

2002-12-01

The Golden Age for geophysical research that followed the IGY set the stage for a new era of interaction among science, technology, and society. World population and the average economic productivity of individuals have both continued to grow exponentially during the past 50 years with the result that by the 1980s the demands of the human economy on the finite renewable resources of planet Earth were approximately equal to the natural regenerative capacities of planetary ecosystems. These demands are now "overshooting" those regenerative powers by about 20 per cent (1). The result could be a collapse in the life-supporting capacity of global ecosystems during coming decades, with tragic implications for civilized society. Novel modes of collaboration among all disciplines and all sectors of society are urgently needed to transform a potential catastrophe into the attractive vision that is now within reach as a result of rapidly expanding human knowledge, emerging technologies for sharing that knowledge (2), and the set of ethical principles for sustainable development contained in the Earth Charter (3). This prospect challenges geophysicists and scholars in all disciplines to forge a new and broadly based contract with society (4). 1. Wackernagel M. et al. 2002. "Tracking the ecological overshoot of the human economy." Proc. Natl. Acad. Sci. USA, Vol. 99, Issue 14, 9266-9271, July 9. 2. Malone T. and Yohe G. 2002. "Knowledge partnerships for a sustainable, equitable, and stable society." J. of Knowledge Management, Vol. 6, No. 4, October (in press). 3. www.earthcharter.org 4. Malone T. 1997. "Building on the legacies of the Intenational Geophysical Year." Transactions, AGU, Vol.78, No. 15, pp. 185-191.

Porcelain monolayers and porcelain/alumina bilayers reinforced by Al2O3/GdAlO3 fibers.

PubMed

Sgura, Ricardo; Medeiros, Igor Studart; Cesar, Paulo Francisco; Campos, Adeliani Almeida; Hernandes, Antonio Carlos

2012-01-01

This work tested the effect of the addition of Al(2)O(3)/GdAlO(3) longitudinal fibers in different contents to veneering porcelain of two dental all ceramic systems. Fibers (0.5 mm diameter) obtained by the Laser Heated Pedestal Growth (LHPG) method were added to bar-shaped specimens made by veneer porcelain (monolayers) or both the veneer and the core ceramic (bilayers) of two all-ceramic systems: In-Ceram Alumina-glass infiltrated alumina composite (GIA) and In-Ceram 2000 AL Cubes-alumina polycrystal (AP) (VITA Zahnfabrik). The longitudinal fibers were added to veneering porcelain (VM7) in two different proportions: 10 or 17 vol%. The bars were divided into nine experimental conditions (n=10) according to material used: VM7 porcelain monolayers, VM7/GIA, VM7/AP; and according to the amount of fibers within the porcelain layer: no fibers, 10 vol% or 17 vol%. After grinding and polishing the specimens were submitted to a three point bending test (crosshead speed = 0.5 mm/min) with porcelain positioned at tensile side. Data were analyzed by means of one-way ANOVA and a Tukey's test (α=5%). Scanning electronic microscopy (SEM) was conducted for fractographic analysis. Regarding the groups without fiber addition, VM7/AP showed the highest flexural strength (MPa), followed by VM7/GIA and VM7 monolayers. The addition of fibers led to a numerical increase in flexural strength for all groups. For VM7/GIA bilayers the addition of 17 vol% of fibers resulted in a significant 48% increase in the flexural strength compared to the control group. Fractographic analysis revealed that the crack initiation site was in porcelain at the tensile surface. Cracks also propagated between fibers before heading for the alumina core. The addition of 17 vol% of Al(2)O(3)/GdAlO(3) longitudinal fibers to porcelain/glass infiltrated alumina bilayers significantly improved its flexural strength. 10 vol% or 17 vol% of fibers inclusion increased the flexural strength for all groups. Copyright © 2011 Elsevier Ltd. All rights reserved.

Defense Threat Reduction Agency > Research > DTRIAC > DTRIAC Dispatch

Science.gov Websites

@mail.mil with your submissions. DTRIAC Dispatch - Vol 5, Issue 3 DTRIAC Dispatch - Vol 5, Issue 2 DTRIAC Dispatch - Vol 5, Issue 1 DTRIAC Dispatch - Vol 4, Issue 1 DTRIAC Dispatch - Vol 3, Issue 4 DTRIAC Dispatch - Vol 3, Issue 3 DTRIAC Dispatch - Vol 3, Issue 2 DTRIAC Dispatch - Vol 3, Issue 1 DTRIAC Dispatch - Vol

Enhancements of thermal conductivities with Cu, CuO, and carbon nanotube nanofluids and application of MWNT/water nanofluid on a water chiller system

NASA Astrophysics Data System (ADS)

Liu, Minsheng; Lin, Mark Chingcheng; Wang, Chichuan

2011-12-01

In this study, enhancements of thermal conductivities of ethylene glycol, water, and synthetic engine oil in the presence of copper (Cu), copper oxide (CuO), and multi-walled carbon nanotube (MWNT) are investigated using both physical mixing method (two-step method) and chemical reduction method (one-step method). The chemical reduction method is, however, used only for nanofluid containing Cu nanoparticle in water. The thermal conductivities of the nanofluids are measured by a modified transient hot wire method. Experimental results show that nanofluids with low concentration of Cu, CuO, or carbon nanotube (CNT) have considerably higher thermal conductivity than identical base liquids. For CuO-ethylene glycol suspensions at 5 vol.%, MWNT-ethylene glycol at 1 vol.%, MWNT-water at 1.5 vol.%, and MWNT-synthetic engine oil at 2 vol.%, thermal conductivity is enhanced by 22.4, 12.4, 17, and 30%, respectively. For Cu-water at 0.1 vol.%, thermal conductivity is increased by 23.8%. The thermal conductivity improvement for CuO and CNT nanofluids is approximately linear with the volume fraction. On the other hand, a strong dependence of thermal conductivity on the measured time is observed for Cu-water nanofluid. The system performance of a 10-RT water chiller (air conditioner) subject to MWNT/water nanofluid is experimentally investigated. The system is tested at the standard water chiller rating condition in the range of the flow rate from 60 to 140 L/min. In spite of the static measurement of thermal conductivity of nanofluid shows only 1.3% increase at room temperature relative to the base fluid at volume fraction of 0.001 (0.1 vol.%), it is observed that a 4.2% increase of cooling capacity and a small decrease of power consumption about 0.8% occur for the nanofluid system at a flow rate of 100 L/min. This result clearly indicates that the enhancement of cooling capacity is not just related to thermal conductivity alone. Dynamic effect, such as nanoparticle dispersion may effectively augment the system performance. It is also found that the dynamic dispersion is comparatively effective at lower flow rate regime, e.g., transition or laminar flow and becomes less effective at higher flow rate regime. Test results show that the coefficient of performance of the water chiller is increased by 5.15% relative to that without nanofluid.

Enhancements of thermal conductivities with Cu, CuO, and carbon nanotube nanofluids and application of MWNT/water nanofluid on a water chiller system

PubMed Central

2011-01-01

In this study, enhancements of thermal conductivities of ethylene glycol, water, and synthetic engine oil in the presence of copper (Cu), copper oxide (CuO), and multi-walled carbon nanotube (MWNT) are investigated using both physical mixing method (two-step method) and chemical reduction method (one-step method). The chemical reduction method is, however, used only for nanofluid containing Cu nanoparticle in water. The thermal conductivities of the nanofluids are measured by a modified transient hot wire method. Experimental results show that nanofluids with low concentration of Cu, CuO, or carbon nanotube (CNT) have considerably higher thermal conductivity than identical base liquids. For CuO-ethylene glycol suspensions at 5 vol.%, MWNT-ethylene glycol at 1 vol.%, MWNT-water at 1.5 vol.%, and MWNT-synthetic engine oil at 2 vol.%, thermal conductivity is enhanced by 22.4, 12.4, 17, and 30%, respectively. For Cu-water at 0.1 vol.%, thermal conductivity is increased by 23.8%. The thermal conductivity improvement for CuO and CNT nanofluids is approximately linear with the volume fraction. On the other hand, a strong dependence of thermal conductivity on the measured time is observed for Cu-water nanofluid. The system performance of a 10-RT water chiller (air conditioner) subject to MWNT/water nanofluid is experimentally investigated. The system is tested at the standard water chiller rating condition in the range of the flow rate from 60 to 140 L/min. In spite of the static measurement of thermal conductivity of nanofluid shows only 1.3% increase at room temperature relative to the base fluid at volume fraction of 0.001 (0.1 vol.%), it is observed that a 4.2% increase of cooling capacity and a small decrease of power consumption about 0.8% occur for the nanofluid system at a flow rate of 100 L/min. This result clearly indicates that the enhancement of cooling capacity is not just related to thermal conductivity alone. Dynamic effect, such as nanoparticle dispersion may effectively augment the system performance. It is also found that the dynamic dispersion is comparatively effective at lower flow rate regime, e.g., transition or laminar flow and becomes less effective at higher flow rate regime. Test results show that the coefficient of performance of the water chiller is increased by 5.15% relative to that without nanofluid. PMID:21711787

Enhancements of thermal conductivities with Cu, CuO, and carbon nanotube nanofluids and application of MWNT/water nanofluid on a water chiller system.

PubMed

Liu, Minsheng; Lin, Mark Chingcheng; Wang, Chichuan

2011-04-05

In this study, enhancements of thermal conductivities of ethylene glycol, water, and synthetic engine oil in the presence of copper (Cu), copper oxide (CuO), and multi-walled carbon nanotube (MWNT) are investigated using both physical mixing method (two-step method) and chemical reduction method (one-step method). The chemical reduction method is, however, used only for nanofluid containing Cu nanoparticle in water. The thermal conductivities of the nanofluids are measured by a modified transient hot wire method. Experimental results show that nanofluids with low concentration of Cu, CuO, or carbon nanotube (CNT) have considerably higher thermal conductivity than identical base liquids. For CuO-ethylene glycol suspensions at 5 vol.%, MWNT-ethylene glycol at 1 vol.%, MWNT-water at 1.5 vol.%, and MWNT-synthetic engine oil at 2 vol.%, thermal conductivity is enhanced by 22.4, 12.4, 17, and 30%, respectively. For Cu-water at 0.1 vol.%, thermal conductivity is increased by 23.8%. The thermal conductivity improvement for CuO and CNT nanofluids is approximately linear with the volume fraction. On the other hand, a strong dependence of thermal conductivity on the measured time is observed for Cu-water nanofluid. The system performance of a 10-RT water chiller (air conditioner) subject to MWNT/water nanofluid is experimentally investigated. The system is tested at the standard water chiller rating condition in the range of the flow rate from 60 to 140 L/min. In spite of the static measurement of thermal conductivity of nanofluid shows only 1.3% increase at room temperature relative to the base fluid at volume fraction of 0.001 (0.1 vol.%), it is observed that a 4.2% increase of cooling capacity and a small decrease of power consumption about 0.8% occur for the nanofluid system at a flow rate of 100 L/min. This result clearly indicates that the enhancement of cooling capacity is not just related to thermal conductivity alone. Dynamic effect, such as nanoparticle dispersion may effectively augment the system performance. It is also found that the dynamic dispersion is comparatively effective at lower flow rate regime, e.g., transition or laminar flow and becomes less effective at higher flow rate regime. Test results show that the coefficient of performance of the water chiller is increased by 5.15% relative to that without nanofluid.

Role of fuel chemical properties on combustor radiative heat load

NASA Technical Reports Server (NTRS)

Rosfjord, T. J.

1984-01-01

In an attempt to rigorously study the fuel chemical property influence on combustor radiative heat load, United Technologies Research Center (UTRC) has conducted an experimental program using 25 test fuels. The burner was a 12.7-cm dia cylindrical device fueled by a single pressure-atomizing injector. Fuel physical properties were de-emphasized by selecting injectors which produced high-atomized, and hence rapidly-vaporizing sprays. The fuels were specified to cover the following wide ranges of chemical properties; hydrogen, 9.1 to 15- (wt) pct; total aromatics, 0 to 100 (vol) pct; and naphthalene, 0 to 30 (vol) pct. They included standard fuels, specialty products and fuel blends. Fuel naphthalene content exhibited the strongest influence on radiation of the chemical properties investigated. Smoke point was a good global indicator of radiation severity.

Artificial heart development program. Volume I. System development. Phase III summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-01-01

The report documents efforts and results in the development of the power system portions of a calf implantable model of nuclear-powered artificial heart. The primary objective in developing the implantable model was to solve the packaging problems for total system implantation. The power systems portion is physically that portion of the implantable model between the Pu-238 heat sources and the blood pump ventricles. The work performed had two parallel themes. The first of these was the development of an integrated implantable model for bench and animal experiments plus design effort on a more advanced model. The second was research andmore » development on components of the system done in conjunction with the development of the implantable model and to provide technology for incorporation into advanced models plus support to implantations, at the University of Utah, of the systems blood pumping elements when driven by electric motor. The efforts and results of implantable model development are covered, mainly, in the text of the report. The research and development efforts and results are reported, primarily, in the appendices (Vol. 2).« less

Peace Corps Program & Training Journal, Vol. IV, No. 6.

ERIC Educational Resources Information Center

Aronson, Margot, Ed.

This issue addresses the problems of women in developing countries, and the role of the Peace Corps in developing programs which respond to the needs of women of the Third World. Articles are presented on: (1) the adverse impact of development on women; (2) appropriate technology for women of the developing countries; (3) the transfer of…

The Effect of Extinguishing Agents on Burning Sonobuoys Containing Lithium-Sulfur Dioxide Batteries

DTIC Science & Technology

1989-09-01

components and the JP-5. In addition, the types of extinguish- ment materials, such as carbor spheres, that have some degree of success on metal fires , would...NWC TP 6571, publication UNCLASSIFIED.) 8. John F. Riley. "Na-X, a New Fire Extinguishing Agent for Metal Fires ," Fire Technology, Vol. 10, No. 4

Science and Technology Text Mining: Origins of Database Tomography and Multi-Word Phrase Clustering

DTIC Science & Technology

2003-08-15

six decades to the pioneering work in: 1) lexicography of Hornby [1942] to account for co- occurrence knowledge, and 2) linguistics of De Saussure ...of Development in a Research Field," Scientometrics, Vol.19, No.1, 1990b. De Saussure , F., "Cours de Linguistique Generale," 4eme Edition, Librairie

Terrorist Use of the Internet and Related Information Technologies

DTIC Science & Technology

2002-05-15

the Anarchist, Vol I," 4 January 1985 [online]; available from <http://www.etext.org/CuD/Misc/anarch>. 33 See _____, "How to Build a Thermonuclear Bomb ," About...Development, no date. [Online]; previously available from <http://www.hlf.org> (accessed 6 December 2001). _____. "How to Build a Thermonuclear Bomb ." About

Proceedings of the 1980 ERADCOM Hybrid Microcircuit Symposium, 1980, Fort Monmouth, New Jersey,

DTIC Science & Technology

1980-06-01

density and largest seam thickness. Eisenmann and Halyard [3] suggest the fluctuating contact resistance ob- served in epoxy attached devices results...34Advances in Epoxy Die Attach," Solid State Technology, Vol. 18, No. 9, Sept. 1975, pp 40-44. 3. D.E. Eisenmann and S.M. Halyard Jr., "Thermal

Simulating Nonequilibrium Radiation via Orthogonal Polynomial Refinement

DTIC Science & Technology

2015-01-07

measured by the preprocessing time, computer memory space, and average query time. In many search procedures for the number of points np of a data set, a...analytic expression for the radiative flux density is possible by the commonly accepted local thermal equilibrium ( LTE ) approximation. A semi...Vol. 227, pp. 9463-9476, 2008. 10. Galvez, M., Ray-Tracing model for radiation transport in three-dimensional LTE system, App. Physics, Vol. 38

A System Scale Theory for Fast Magnetic Reconnection

NASA Astrophysics Data System (ADS)

Knoll, D.; Chacon, L.; Lapenta, G.

2005-12-01

Magnetic reconnection is at the root of explosive phenomena such as solar flares, coronal mass ejections, plasmoid ejection from earth's magnetotail and major disruptions in magnetic fusion energy experiments. Plasmas in all the above mentioned cases are known to have negligible electric resistivity. This small resistivity can not explain the reconnection time scales observed in nature, when using the resistive MHD model. Recently much progress has been made considering the Hall MHD model. Hall physics has been shown to facility fast reconnection when the magnetic field shear scale length is in the order of the ion inertial length. However, in many systems of interest the initial scale lengths of the problem can not justify the use of Hall MHD. Thus a successful system scale theory must involve a current sheet thinning mechanism which brings the relevant scales down to the Hall scales. In this presentation we give examples of how naturally occurring hydrodynamic flows can provide such current sheet thinning [1,2,3] and where these occur in solar [4] and magnetosphere application [5]. We also discuss the primary obstacle for such flow to drive current sheet thinning, the build up of magnetic pressure, and how Hall MHD may overcome this obstacle. [1] Knoll and Brackbill, Phys. Plasmas, vol. 9, 2002 [2] Knoll and Chacon, PRL, vol. 88, 2002 [3] Knoll and Chacon, Phys. Plasmas, 2005 (submitted) [4] Lapenta and Knoll, ApJ, vol. 624, 2005 [5] Brackbill and Knoll, PRL, vol. 86, 2001

On testing of the photometer-polarimeter UVP layout using a telescope on Earth's surface

NASA Astrophysics Data System (ADS)

Nevodovskyi, P. V.; Vidmachenko, A. P.; Morozhenko, O. V.; Zbrutskyi, O.; Ivakhiv, O. V.

2016-08-01

One of the causes of climate change (changing of concentration of stratospheric ozone) - is variations due to aerosol optical thickness in the upper layers of Earth's atmosphere. To solve the problem is necessary to make a space experiment to receive polarization observational data. Their analysis will: determine the value of the real part of the refractive index, the size of the stratospheric aerosol, optical thickness of the stratospheric aerosol layer, investigate aerosol's layer horizontal structure and its changes over time. Main Astronomical Observatory of NAS of Ukraine jointly with the National Technical University of Ukraine "KPI" and National University "Lviv Polytechnic" for a long time working on the design of polarimeter to study the stratospheric layer of the Earth from board of artificial satellites. During this time accumulated a great experience in such work, and created a layout of compact board ultraviolet polarimeter UFP [1-4]. For testing of ground variant of layout of UFP, it is installed on the telescope AZT-2 of the Main Astronomical Observatory NAS of Ukraine (Kyiv). Using it we plan to investigate the possibility of determining the degree of polarization of the twilight glow of Earth's atmosphere, and implementation of this technique in the development of space experiment on investigation of the stratospheric aerosol from space. For this purpose we develop a special set of equipment that will adapt the layout for working of UFP with telescope AZT-2, and carry out the above mentioned work (see. in [5-7]). References. 1. P. Nevodovskyi, O. Morozhenko, A. Vidmachenko, O. Ivakhiv, M. Geraimchuk, O. Zbrutskyi. Tiny Ultraviolet Polarimeter for Earth Stratosphere from Space Investigation // Proceedings of 8th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS'2015). 24-26 September 2015, Proceedings. Warsaw, Poland. Vol.81, p. 28-32. 2. Nevodovsksiy P. V., Morozhenko A. V. Studies of stratospheric ozone layer from near-earth orbit utilizing ultraviolet polarimeter // Acta Astronautica. 2009, vol. 64, no 1, p. 54-58. 3. Nevodovskij P. V. Kvantakons and optimization of their parameters for astronomical observations Kinematika i Fizika Nebesnykh Tel. 2001, vol. 17, no. 3, p. 279-288. 4. A. P. Vid'machenko, P. V. Nevodovsky. A cooled photomultiplier with an InGaAs photocathode developed for the spectropolarimetry observations // Kinematika i Fizika Nebesnykh Tel. 2000. Suppl. 3, p. 283-285. 5. Morozhenko A. V., Vidmachenko A. P., Nevodovskiy P. V., Kostogryz N. M. On the efficiency of polarization measurements while studying aerosols in the terrestrial atmosphere // Kinematics and Physics of Celestial Bodies. 2014, vol. 30, no. 1, p. 11-21. 6. A.V. Morozhenko, A.P. Vidmachenko, P.V. Nevodovskyi. Aerosol in the upper layer of earth's atmosphere // Kinematics and Physics of Celestial Bodies. 2013, vol. 29, no. 5, p. 243-246. 7. Morozhenko A.V. Polarimetry of twilight sky and stratospheric aerosol // Kinematics and Physics of Celestial Bodies. 2010, vol. 26, no. 1, p. 36-38.

Geology and radiometric dating of Quaternary monogenetic volcanism in the western Zacapu lacustrine basin (Michoacán, México): implications for archeology and future hazard evaluations

NASA Astrophysics Data System (ADS)

Reyes-Guzmán, Nanci; Siebe, Claus; Chevrel, Magdalena Oryaëlle; Guilbaud, Marie-Noëlle; Salinas, Sergio; Layer, Paul

2018-02-01

The Zacapu lacustrine basin is located in the north-central part of the Michoacán-Guanajuato volcanic field (MGVF), which constitutes the west-central segment of the Trans-Mexican Volcanic Belt. Geological mapping of a 395 km2 quadrangle encompassing the western margin of the basin, 40Ar/39Ar and 14C radiometric dating, whole-rock chemical and petrographic analyses of volcanic products provide information on the stratigraphy, erupted volumes, age, and composition of the volcanoes. Although volcanism in the MGVF initiated since at least 5 Ma ago, rocks in the western Zacapu lacustrine basin are all younger than 2.1 Ma. A total of 47 volcanoes were identified and include 19 viscous lava flows ( 40 vol.%), 17 scoria cones with associated lava flows ( 36 vol.%), seven lava shields ( 15 vol.%), three domes ( 6 vol.%), and one maar ( 2 vol.%). Erupted products are dominantly andesites with 42 km3 ( 86 vol.%) followed by 4 km3 of dacite ( 8 vol.%), 1.4 km3 of basaltic trachy-andesite ( 3 vol.%), 1 km3 of basaltic andesite ( 2 vol.%), and 0.14 km3 of rhyolite ( 0.3 vol.%). Eruptive centers are commonly aligned ENE-WSW following the direction of the regional Cuitzeo Fault System. Over time, the high frequency of eruptions and consequent accumulation of lavas and pyroclastic materials pushed the lake's shore stepwise toward the southeast. Eruptions appear to have clustered through time. One cluster occurred during the Late Pleistocene between 27,000 and 21,300 BC when four volcanoes erupted. A second cluster formed during the Late Holocene, between 1500 BC and AD 900, when four closely spaced monogenetic vents erupted forming thick viscous `a'a to blocky flows on the margin of the lacustrine flats. For still poorly understood reasons, these apparently inhospitable lava flows were attractive to human settlement and eventually became one of the most densely populated heartlands of the pre-Hispanic Tarascan civilization. With an average eruption recurrence interval of 900 years during the Late Holocene the western Zacapu lacustrine basin is one of the most active areas in the MGVF and should hence be of focal interest for regional volcanic risk evaluations.

Melt extraction during heating and cooling of felsic crystal mushes in shallow volcanic systems: An experimental study

NASA Astrophysics Data System (ADS)

Pistone, M.; Baumgartner, L. P.; Sisson, T. W.; Bloch, E. M.

2017-12-01

The dynamics and kinetics of melt extraction in near-solidus, rheologically stalled, felsic crystal mushes (> 50 vol.% crystals) are essential to feeding many volcanic eruptions. At shallow depths (< 15 km), most felsic crystal mushes would be volatile-saturated and may be thermally stable for long time periods (104-107 years). In absence of deformation, residual melt can segregate from the mush's crystalline framework stimulated by: 1) gas injecting from hot mafic magmas into felsic mushes (heating / partial melting scenario), and 2) gas exsolving from the crystallizing mush (cooling / crystallizing scenario). The conditions and efficiency of melt extraction from a mush in the two scenarios are not well understood. Thus, we conducted high-temperature (700 to 850 °C) and -pressure (1.1 kbar) cold seal experiments (8-day duration) on synthetic felsic mushes, composed of water-saturated (4.2 wt.%) rhyodacite melt bearing different proportions of added quartz crystals (60, 70, and 80 vol%; 68 mm average particle size). High-spatial resolution X-ray tomography of run products show: 1) in the heating scenario (> 750 °C) melt has not segregated due to coalescence of vesicles (≤ 23 vol%) and large melt connectivity (> 7 vol% glass) / low pressure gradient for melt movement up to 80 vol% crystals; 2) in the cooling scenario (≤ 750 °C) vesicle (< 11 vol%) coalescence is limited or absent and limited amount of melt (3 to 11 vol%) segregated from sample center to its outer periphery (30 to 100 mm melt-rich lenses), testifying to the efficiency of melt extraction dictated by increasing crystallinity. These results suggest that silicic melt hosted within a crystal-rich mush can accumulate rapidly due to the buildup of modest gas pressures during crystallization at temperatures near the solidus.

Media, Multimedia, Omnimedia: Selected Papers from the CETaLL Symposium on the Occasion of the AILA World Congress (11th, Jyvaskyla, Finland, August 4-9, 1996) and Man and Media Symposium (5th, Nancy, France, June 5-7, 1997). Bayreuth Contributions to Glottodidactics, Vol. 7.

ERIC Educational Resources Information Center

Hogan-Brun, Gabrielle, Ed.; Jung, Udo O. H., Ed.

This volume presents a collection of 14 selected papers on the theme of how to use media technology to enhance language learning and teaching. Papers explore innovative ways to use existing technologies in broadband networks, the telemedia, and multimedia, while others focus on the use of the Internet. It is hoped that exploring the use of these…

TRI-SERVICE ELF COMMUNICATIONS - VOL. II, BIBLIOGRAPHY.

DTIC Science & Technology

BIBLIOGRAPHIES, UNDERGROUND ANTENNAS , ELECTRICAL RESISTANCE, UNDERGROUND , COSTS, VERY LOW FREQUENCY, LOW FREQUENCY, PROPAGATION, NOISE(RADIO)....EXTREMELY LOW FREQUENCY), (*COMMAND AND CONTROL SYSTEMS, COMMUNICATION AND RADIO SYSTEMS), (* COMMUNICATION AND RADIO SYSTEMS, MILITARY RESEARCH

Evaluation of coated columbium alloy heat shields for space shuttle thermal protection system application. Volume 3, phase 3: Full size TPS evaluation

NASA Technical Reports Server (NTRS)

Baer, J. W.; Black, W. E.

1974-01-01

The thermal protection system (TPS), designed for incorporation with space shuttle orbiter systems, consists of one primary heat shield thermally and structurally isolated from the test fixture by eight peripheral guard panels, all encompassing an area of approximately 12 sq ft. TPS components include tee-stiffened Cb 752/R-512E heat shields, bi-metallic support posts, panel retainers, and high temperature insulation blankets. The vehicle primary structure was simulated by a titanium skin, frames, and stiffeners. Test procedures, manufacturing processes, and methods of analysis are fully documented. For Vol. 1, see N72-30948; for Vol. 2, see N74-15660.

Effects of Computer Architecture on FFT (Fast Fourier Transform) Algorithm Performance.

DTIC Science & Technology

1983-12-01

Criteria for Efficient Implementation of FFT Algorithms," IEEE Transactions on Acoustics, Speech, and Signal Processing, Vol. ASSP-30, pp. 107-109, Feb...1982. Burrus, C. S. and P. W. Eschenbacher. "An In-Place, In-Order Prime Factor FFT Algorithm," IEEE Transactions on Acoustics, Speech, and Signal... Transactions on Acoustics, Speech, and Signal Processing, Vol. ASSP-30, pp. 217-226, Apr. 1982. Control Data Corporation. CDC Cyber 170 Computer Systems

Adaptive and Optimal Control of Stochastic Dynamical Systems

DTIC Science & Technology

2015-09-14

Advances in Statistics, Probability and Actuarial Sciences , Vol. 1, World Scientific, 2012, 451- 463. [4] T. E. Duncan and B. Pasik-Duncan, A...S. N. Cohen, T. K. Siu and H. Yang) Advances in Statistics, Probability and Actuarial Sciences , Vol. 1, World Scientific, 2012, 451-463. 4. T. E...games with gen- eral noise processes, Models and Methods in Economics and Management Science : Essays in Honor of Charles S. Tapiero, (eds. F. El

Creation and Optimization of Novel Solar Cell Power via Bimaterial Piezoelectric MEMS Device

DTIC Science & Technology

2011-12-01

piezoelectric mechanical vibration energy harvesters ,” Integrated Ferroelectrics, vol. 71, pp. 121–160, 2005. [32] Y. C. Shu, I. C. Lien, “Efficiency of...energy conversion for a piezoelectric power harvesting system.” Journal of Micromechanics and Microengineering, vol. 16, pp. 2429–2438, 2006. [33] C. D...maximum efficiency for piezoelectric vibrations occurs at the natural, or resonant, frequency for the referenced material. If the alternative

Report from ILEWG to the COSPAR Panel on Exploration

NASA Astrophysics Data System (ADS)

Foing, Bernard H.

The International Lunar Exploration Working Group (ILEWG) was established in April 1995 at a meeting in Hamburg, Germany. As established in its charter, this working group reports to COSPAR and is charged with developing an international strategy for the exploration of the Moon. It discusses coordination between missions, and a road map for future international lunar exploration and utilisation. It fosters information exchange or potential and real future lunar robotic and human missions, as well as for new scientific and exploration information about the Moon. ILEWG was used to feed forward results from lunar missions such as SMART1 to the next ones, and we look now to integrate lessons from all recent orbiters and landers, for the upcoming landers, sample return missions, and human activities. We give a report on ILEWG community activities, refer to COSPAR and ILEWG ICEUM and lunar conferences and declarations [1-18], and discuss the follow-up of GLUC/ICEUM11 declaration relevant to COSPAR PEX*. References: [1] 1st International Lunar Workshop, Balsiger H. et al., Editors, European Space Agency, 1994. ESA-SP-1170. [2] 2nd International Lunar Workshop, Kyoto, H. Mizutani, editor, Japan Space Forum Publisher, 1997. [3] 3rd International Lunar Workshop, Moscow 1998, E. Galimov, editor. [4] ICEUM4, ESTEC, 2000, ESA SP-462, B.H. Foing & M. Perry, editors. [5] ICEUM5, Hawaii Nov 2003, Durst S.M. et al, Editors, Vol 108, 1-576 pp, Science and Technology Series, American Astronautical Society, 2004. [6] ICEUM6, Udaipur 2004, Bhandari N., Editor, Journal Earth Sys-tem Science, India, 114, No6, Dec 2005, pp. 573-841. [7] ICEUM7, Toronto Sept 2005, sci.esa.int/ilewg. [8] ICEUM8, Beijing July 2006, Journal of Chinese Society of Astronautics, Vol. 28 Sup., 2007, Ji W., Editor. [9] ICEUM9, Sorrento, Italy, Foing B., Espinasse S., Kosters G., Editors. http://sci.esa.int/iceum9, Dec. 2007), [11] Ehrenfreund, P., Foing, B.H., Cellino, A. Editors, The Moon and Near Earth Objects, ASR Vol 37, 1, 2006. [12] Foing, B.H. et al editors, 'Astronomy and Space Science from the Moon', ASR 14, 6, 1994. [13] Ip W.-H., Foing, B.H., Masson Ph.L., editors, The Moon and Mars, ASR Vol 23, 11, 1999. [14] Foing, B.H. et al, editor, Lunar Exploration, Planetary and Space Science, Vol 50, 14-15, 2002. [15] Foing, B.H., Heather, D. editors, 'Lunar Exploration 2000', ASR Vol 30, Nr 8, 2002. [16] Huntress, W. et al 'The next steps in exploring deep space - A cosmic study by the IAA', Acta Astronautica, Vol 58, Issues 6-7, 2006, p302-377. [17] http://sci.esa.int/ilewg/43654-declaration-iceum10-leag-srr-florida-2008/ [18] Ehrenfreund P. et al (COSPAR planetary exploration panel report) 2012, ASR Vol 49, Nr 1, pp. 2-48. *Relevant extract from GLUC/ICEUM11 declaration: “467 International Lunar Explorers, registered delegates from 26 countries, assembled at GLUC Global Lunar Conference including the 11th ILEWG Conference on Exploration and Utilisation of the Moon (ICEUM11) in Beijing." "1. Science and exploration (related GLUC/ICEUM11 recommendations will be addressed at COSPAR B0.1 Lunar science and exploration session) 2. Technologies and resources - A number of robotic missions to the Moon are now undertaken independently by various nations, with a degree of exchange of information and co-ordination. That should increase towards real co-operation, still allowing areas of competition for keeping the process active, cost-effective and faster. - Lunar landers, pressurized lunar rover projects as presented from Europe, Asia and America are important steps that can create opportunities for international collaboration, within a coordinated village of robotic precursors and assistants to crew missions. - We have to think about development, modernization of existing navigation capabilities, and provision of lunar positioning, navigation and data relay assets to support future robotic and human exploration. New concepts and new methods for transportation have attracted much attention and are of great potential. 3. Infrastructures and human aspects - It is recommended to have technical sessions and activities dealing with different aspects of human adaptation to space environments, the modeling of sub-systems, microbial protection and use of inflatable technologies - While the Moon is the best and next logical step in human exploration, we should make best use of the space stations as stepping stones for exploration and human spaceflight beyond Low Earth Orbit. - Further research is needed on lunar dust aspects in regard to humans and interaction with habitats. We note high interest in CELSS for Moon and Mars bases, and recommend further research and development. - We recommend the development and use of terrestrial analogues research sites and facilities, for technology demonstrations, comparative geology and human performance research, and public engagement. We endorse the proposal of development of a site at La Reunion for international Moon-Mars analogue research. 4. Moon, Space, Society and Young Explorers - We consider that the current legal regime as set out in the Outer Space Treaty and the Moon agreement are satisfactory for current and future missions, but may require further clarification for future exploration. Issues of transparency and security will need to be addressed. - Great things are happening for Young Lunar Explorers, with inspiring missions and hands-on activities as coordinated by ILEWG. Lunar exploration is encouraging students of all ages to pursue higher education. - More possibilities for participatory engagement should be offered to the society for example via inter-disciplinary activities with the humanities. - We appreciate the work from COSPAR panel on Exploration PEX that should be shared further. - Continued cooperation should be enforced at all levels. The space community feels strongly that joining the forces of space faring nations to explore the Moon should be seriously implemented, with the views of expanding a Global Robotic Village and building in the long run a Manned International Lunar Base.” “We, the participants of the GLUC-ICEUM11 conference, commit to an enhanced global cooperation towards international lunar exploration for the benefit of humankind. Endorsed by the delegates of GLUC-ICEUM11”

Web-GIS approach for integrated analysis of heterogeneous georeferenced data

NASA Astrophysics Data System (ADS)

Okladnikov, Igor; Gordov, Evgeny; Titov, Alexander; Shulgina, Tamara

2014-05-01

Georeferenced datasets are currently actively used for modeling, interpretation and forecasting of climatic and ecosystem changes on different spatial and temporal scales [1]. Due to inherent heterogeneity of environmental datasets as well as their huge size (up to tens terabytes for a single dataset) a special software supporting studies in the climate and environmental change areas is required [2]. Dedicated information-computational system for integrated analysis of heterogeneous georeferenced climatological and meteorological data is presented. It is based on combination of Web and GIS technologies according to Open Geospatial Consortium (OGC) standards, and involves many modern solutions such as object-oriented programming model, modular composition, and JavaScript libraries based on GeoExt library (http://www.geoext.org), ExtJS Framework (http://www.sencha.com/products/extjs) and OpenLayers software (http://openlayers.org). The main advantage of the system lies in it's capability to perform integrated analysis of time series of georeferenced data obtained from different sources (in-situ observations, model results, remote sensing data) and to combine the results in a single map [3, 4] as WMS and WFS layers in a web-GIS application. Also analysis results are available for downloading as binary files from the graphical user interface or can be directly accessed through web mapping (WMS) and web feature (WFS) services for a further processing by the user. Data processing is performed on geographically distributed computational cluster comprising data storage systems and corresponding computational nodes. Several geophysical datasets represented by NCEP/NCAR Reanalysis II, JMA/CRIEPI JRA-25 Reanalysis, ECMWF ERA-40 Reanalysis, ECMWF ERA Interim Reanalysis, MRI/JMA APHRODITE's Water Resources Project Reanalysis, DWD Global Precipitation Climatology Centre's data, GMAO Modern Era-Retrospective analysis for Research and Applications, reanalysis of Monitoring atmospheric composition and climate (MACC) Collaborated Project, NOAA-CIRES Twentieth Century Global Reanalysis Version II, NCEP Climate Forecast System Reanalysis (CFSR), meteorological observational data for the territory of the former USSR for the 20th century, results of modeling by global and regional climatological models, and others are available for processing by the system. The Web-GIS information-computational system for heterogeneous geophysical data analysis provides specialists involved into multidisciplinary research projects with reliable and practical instruments for integrated research of climate and ecosystems changes on global and regional scales. With its help even an unskilled in programming user is able to process and visualize multidimensional observational and model data through unified web-interface using a common graphical web-browser. This work is partially supported by SB RAS project VIII.80.2.1, RFBR grant #13-05-12034, grant #14-05-00502, and integrated project SB RAS #131. References 1. Gordov E.P., Lykosov V.N., Krupchatnikov V.N., Okladnikov I.G., Titov A.G., Shulgina T.M. Computational and information technologies for monitoring and modeling of climate changes and their consequences. - Novosibirsk: Nauka, Siberian branch, 2013. - 195 p. (in Russian) 2. Felice Frankel, Rosalind Reid. Big data: Distilling meaning from data // Nature. Vol. 455. N. 7209. P. 30. 3. T.M. Shulgina, E.P. Gordov, I.G. Okladnikov, A.G., Titov, E.Yu. Genina, N.P. Gorbatenko, I.V. Kuzhevskaya, A.S. Akhmetshina. Software complex for a regional climate change analysis. // Vestnik NGU. Series: Information technologies. 2013. Vol. 11. Issue 1. P. 124-131 (in Russian). 4. I.G. Okladnikov, A.G. Titov, T.M. Shulgina, E.P. Gordov, V.Yu. Bogomolov, Yu.V. Martynova, S.P. Suschenko, A.V. Skvortsov. Software for analysis and visualization of climate change monitoring and forecasting data // Numerical methods and programming, 2013. Vol. 14. P. 123-131 (in Russian).

Report of the International Ice Patrol Services in the North Atlantic Ocean, Season of 1985

DTIC Science & Technology

1987-03-17

drift to a hydroahic surveys ( Scobie AscresuleIPmt ofthis re lyconna e constant 90-150km drift error In and Schultz, 1976). It is on a grid schedule,l...D.G., 1980. On Predicting Iceberg Drift, Cold Regions Science and Technology, Vol 1 (3/4): 273-282. Scobie , R.W., and R.H. Schultz, 1976. Oceanographyof

Tibetan-English Dictionary of Modern Tibetan. Bibliotheca Himalayica, Series II, Vol. 9.

ERIC Educational Resources Information Center

Goldstein, Melvyn C., Ed.

Recent political events have triggered a revolution in the Tibetan language. The entrance of Tibet into the world arena of politics, science and technology has led to the creation of thousands of new lexical items in a relatively short period of time. Because of these changes, modern literary Tibetan is extremely difficult for non-Tibetans to…

Photonic Arbitrary Waveform Generation Technology

DTIC Science & Technology

2006-06-01

locked external- cavity semiconductor diode ring laser “, Optics Letters, Vol. 27, No. 9 , 719-721, (2002). [22] S. Gee, F. Quinlan, S. Ozharar... optical pulses that one is accustomed to. Modelocked semiconductor lasers are used to generate a set of phase locked optical frequencies on a periodic...The corresponding optical spectrum of the laser consists of a comb of periodically spaced, phase - locked

Repairing Learned Knowledge Using Experience

DTIC Science & Technology

1990-05-01

34 Artifcial Intelligence Journal, vol. 19, no. 3. Winston, Patrick Henry (1984], Artificial Intelligence , Second Edition, Addison-Wesley. Analogical...process speeds up future problem solving, but the scope of the learni ng- augmented theory remains unchanged. In con- (continued on back) PD D J7 1473...Distribution/ Avaiability Codes Avail and/or .Dist Special MASSACHUSETTS INSTITUTE OF TECHNOLOGY ARTIFICIAL INTELLIGENCE LABORATORY A.I. Memo No. 1231

China Report, Science and Technology.

DTIC Science & Technology

1987-05-08

RECTANGULAR TANK UNDER LOW-GRAVITY CONDITIONS Beijing QINGHUA DAXUE XUEBAO (ZIRAN KEXUE BAN) [JOURNAL OF TSINGHUA UNIVERSITY (NATURAL SCIENCE)] in...1077 48 APPLIED SCIENCES of NEW WEIGHTED TECHNIQUE IN HEURISTIC SEARCH Beijing QINGHUA DAXUE XUEBAO (ZIRAN KEXUE BAN) [JOURNAL OF TSINGHUA...WITH ECCENTRIC CRACK Beijing QINGHUA DAXUE XUEBAO (ZIRAN KEXUE BAN) [JOURNAL OF TSINGHUA UNIVERSITY (NATURAL SCIENCE)] in Chinese Vol 26 No 3, Jun

A Technology for Developing Instructional Materials. Vol. 3, Handbook. Part B, Collect and Analyze Data About Criterion Behaviors.

ERIC Educational Resources Information Center

Gropper, George L.

This document is the second in a series of 11 subvolumes of a handbook providing training for educational research and development personnel in the development of instructional materials. This subvolume deals with the task of collecting and analyzing data about criterion behavior. The document content is divided into the following five steps for…

Clean Cities Now, Vol. 20, No. 1, Summer 2016 - Tackling Transportation: Clean Cities and NPS Team Up to Steer National Parks Toward a Sustainable Future.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clean Cities Now is the official semi-annual newsletter of Clean Cities, an initiative designed to reduce petroleum consumption in the transportation sector by advancing the use of alternative and renewable fuels, fuel economy improvements, idle-reduction measures, and new technologies, as they emerge.

The Deep Carbon Cycle and CO2 Sequestration

NASA Astrophysics Data System (ADS)

Filipovitch, N. B.; Mao, W. L.; Chou, I.; Mu, K.

2009-12-01

Increased understanding of the Earth’s carbon cycle may provide insight for future carbon storage. Long term geologic sequestration of CO2 occurs in the earth via exothermic reactions between CO2 and silicate minerals to form carbonate minerals. It has been shown that while there is a large enough supply of ultra mafic igneous rock to sequester the CO2 [1], the kinetics of this natural process are too slow to effectively manage our CO2 output. Most studies have focused on studying reaction kinetics at relatively low temperatures and pressures [2,3], and have found that the reaction kinetics are either too slow or (in the case of serpentine) necessitate an uneconomical heat pretreatment [3,4]. Our experiments expand the pressures and temperatures (up to 500 bars and exceeding 200 °C) at which the CO2 + silicate reaction is studied using fused silica capillary cells and Raman and XRD analysis. By increasing our understanding of the kinetics of this process and providing a valuable input for reactive flow and transport models, these results may guide approaches for practical CO2 sequestration in carbonate minerals as a way to manage atmospheric CO2 levels. High pressure and temperature results on carbonates have implications for understanding the deep carbon cycle. Most of the previous high pressure studies on carbonates have concentrated on magnesite (MgCO3), calcite (CaCO3), or dolomite ((Ca,Mg)CO3) [5,6]. While the Mg and Ca carbonates are the most abundant, iron-rich siderite (FeCO3) may be a significant player at greater depths within the earth. We performed XRD and Raman spectroscopy experiments on siderite to lower mantle pressures (up to 40 GPa) and observed a possible phase change around 13 GPa. References 1. Lackner, Klaus S., Wendt, Christopher H., Butt, Darryl P., Joyce, Edward L., Sharp, David H., 1995, Carbon dioxide disposal in carbonate minerals, Energy, Vol.20, No. 11, pp. 1153-1170 2. Bearat, Hamdallah, McKelvy, Michael J., Chizmeshya, Andrew V.G., Gormley, Deirdre, Nunez, Ryan, Carpenter, R.W., Squires, Kyle, Wolf, George, 2006, Carbon Sequestration via Aqueous Olivine Mineral Carbonation: Role of Passivating Layer Formation, Environ. Sci. Technol., Vol. 40, pp 4802-4808 3. Wolf, George H., Chizmeshya, Andrew V. G., Diefenbacher, Jason, McKelvy, Michael J., 2004, In Situ Observation of CO2 Sequestration Reactions Using a Novel Microreaction System, Environmental Science & Technology, Vol.38, No.3, pp 932-936 4. O’Connor, W. K., Dahlin, D. C., Nilsen, D.N., Rush, G.E., Walters, R.P., and Turner, P. C., 2000, “CO2 Storage in Solid Form: A Study of Direct Mineral Carbonation,” Proc. of the 5th International Conference on Greenhouse Gas Technologies, Cairns, Australia, August 14-18, pp. 1-7 5. Isshiki, Maiko, Irifune, Tetsuo, Hirose, Kei, Ono, Shigeaki, Ohishi, Yasuo, Watanuki, Tetsu, Nishibori, Eiji, Takata, Masaki, Sakata, Makoto, 2004, Stability of magnesite and its high-pressure form in the lowermost mantle, Nature, Vol. 427, pp. 60-63 6. Kawano, Jun, Miyake, Akira, Shimobayashi, Norimasa, Kitamura, Masao, 2009, Molecular dynamics simulation of the phase transition between calcite and CaCO3-II , Journal of Physics: Condensed Matter, Vol. 21, pp. 1-11

Experiment on the Effects of Storage Duration of Biodiesel produced from Crude Palm Oil, Waste Cooking oil and Jatropha

NASA Astrophysics Data System (ADS)

Nanihar, Nadiarulah; Khalid, Amir; Mustaffa, Norrizal; Jaat, Norrizam; Sapit, Azwan; Razali, Azahari; Sunar, Norshuhaila Mohamed

2017-10-01

Biodiesel based on vegetable oil is an alternative that had various advantage in term of sustainability and environmental attractive compare to others conventional diesel. Biodiesel is product of any fat or oil that derived from any organic sources through a refinery process called transesterification process. This research investigates the effects of storage duration and variant ambient condition on the biodiesel properties and characteristics. In this study, there are three types of blending which is 5vol% blends ( 5vol% plant oil 95vol% diesel), 10vol% blending (10vol% plant oil and 90vol% diesel) and 15vol% blending (15vol% plant oil and 85vol% diesel) each called CPO5 (crude palm oil 5vol%), CPO10 (crude palm oil 10vol%),CPO15 (crude palm oil 15vol%), JO5 (jatropha oil 5vol%), JO10 (jatropha oil 10vol%),and JO15 (jatropha oil 15vol%) respectively. Biodiesel samples were stored at indoor condition and outdoor condition for a 3 months period. The fuel properties such as acid value, viscosity, density, water content and flash point are observed with the laboratory instrument. Flash point value and water content increased under both of indoor and outdoor condition and a steady data for viscosity and density. However, acid value at indoor condition nearly constant but increased dramatically for outdoor condition over the time.

Mechanical and dielectric characterization of lead zirconate titanate(PZT)/polyurethane(PU) thin film composite for energy harvesting

NASA Astrophysics Data System (ADS)

Aboubakr, S.; Rguiti, M.; Hajjaji, A.; Eddiai, A.; Courtois, C.; d'Astorg, S.

2014-04-01

The Lead Zirconate titanate (PZT) ceramic is known by its piezoelectric feature, but also by its stiffness, the use of a composite based on a polyurethane (PU) matrix charged by a piezoelectric material, enable to generate a large deformation of the material, therefore harvesting more energy. This new material will provide a competitive alternative and low cost manufacturing technology of autonomous systems (smart clothes, car seat, boat sail, flag ...). A thin film of the PZT/PU composite was prepared using up to 80 vol. % of ceramic. Due to the dielectric nature of the PZT, inclusions of this one in a PU matrix raises the permittivity of the composite, on other hand this latter seems to decline at high frequencies.

Electrical and dielectric properties of foam injection-molded polypropylene/multiwalled carbon nanotube composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ameli, A.; Nofar, M.; Saniei, M.

A combination of high dielectric permittivity (ε′) and low dielectric loss (tan δ) is required for charge storage applications. In percolative systems such as conductive polymer composites, however, obtaining high ε′ and low tan δ is very challenging due to the sharp insulation-conduction transition near the threshold region. Due to the particular arrangement of conductive fillers induced by both foaming and injection molding processes, they may address this issue. Therefore, this work evaluates the application of foam injection molding process in fabricating polymer nanocomposites for energy storage. Polypropylene-multiwalled carbon nanotubes (PP-MWCNT) composites were prepared by melt mixing and foamed inmore » an injection molding process. Electrical conductivity (σ), ε′ and tan δ were then characterized. Also, scanning and transmission electron microscopy (SEM and TEM) was used to investigate the carbon nanotube’s arrangement as well as cellular morphology. The results showed that foam injection-molded composites exhibited highly superior dielectric properties to those of solid counterparts. For instance, foamed samples had ε′=68.3 and tan δ =0.05 (at 1.25 vol.% MWCNT), as opposed to ε′=17.8 and tan δ=0.04 in solid samples (at 2.56 vol.% MWCNT). The results of this work reveal that high performance dielectric nanocomposites can be developed using foam injection molding technologies for charge storage applications.« less

Development and Experimental Operation of a Flashboard Plasma Cathode Test Stand

DTIC Science & Technology

2012-06-01

grid-controlled system [31]. J.R. Bayless and his group developed a new type of plasma cathode electron gun qualified for pulsed and continuous...Interferometry of flashboard and cable- gun plasma opening switches on hawk,” IEEE Trans. Plasma Sci., vol. 25, no. 2, pp. 189–195, Apr. 1997. [29] C...The plasma -cathode electron gun ,” IEEE Journal of Quantum Electronics, vol. 10, no. 2, pp. 213–218, Feb 1974. [33] Ady Hershcovitch

Navy Sea Ice Prediction Systems

DTIC Science & Technology

2002-01-01

for the IABP drifting buoys (red), the model (green), and the model with assimilation (black). 55 Oceanography • Vol. 15 • No. 1/2002 trate the need...SPECIAL ISSUE – NAVY OPERATIONAL MODELS : TEN YEARS LATER Oceanography • Vol. 15 • No. 1/2002 44 ice extent and/or ice thickness. A general trend...most often based on a combination of models and data. Modeling sea ice can be a difficult problem, as it exists in many different forms (Figure 1). It

Military Publications, Index of Test Operations Procedures

DTIC Science & Technology

1981-10-01

AND RECORDING EQUIPMENT B033862L VOL X ELECTRONIC TEST EQUIPMENT BO33863L VOL XI MAINTENANCE OF ARMY AIRCRAFT; OPERATORS AND CREWMEMBERS MANUALS ...SYSTEMS 718646 6 JUN 68 6-2-186 (L) METEOROLOGICAL EQUIPMENT; METEOROLOGICAL STATIONS, MANUAL OR AUTOMATIC 870954 20 MAR 70 6-2-189 (L) METEOROLOGICAL...69 6-2-250 (L) RELAYS, RADIO 718622 16 APR 69 6-2-262 (L) SUPPRESSORS, VOLTAGE TRANSIENT 720578 MAR 67 6-2-265 (L) SWITCHBOARDS, MANUAL 718647 1 DEC

BIOCONAID System (Bionic Control of Acceleration Induced Dimming).

DTIC Science & Technology

1981-07-01

Howard, P. , "The Physiology of Positive Acceleration," Chapter 23 in A Textbook of Aviation Physiology, Edited by J. A. Gilles, Pergamon Press...of the Carotid Sinus Baroreceptor Process in a Dog ," IEEE Trans. Biomed. Engineering, BME , Vol. 22, No. 3, pp. 502-507, 1975. 16. Leverett, S. D...Electromyogram, ’ IEEE Transactions on Biomedical Engineering. Vol. BME -24, No. 5, pp. 417-424, 1977. 26. Stoll, Alice M., "Human Tolerance to Positive G as

Software Tools for Design and Performance Evaluation of Intelligent Systems

DTIC Science & Technology

2004-08-01

Self-calibration of Three-Legged Modular Reconfigurable Parallel Robots Based on Leg-End Distance Errors,” Robotica , Vol. 19, pp. 187-198. [4...9] Lintott, A. B., and Dunlop, G. R., “Parallel Topology Robot Calibration,” Robotica . [10] Vischer, P., and Clavel, R., “Kinematic Calibration...of the Parallel Delta Robot,” Robotica , Vol. 16, pp.207- 218, 1998. [11] Joshi, S.A., and Surianarayan, A., “Calibration of a 6-DOF Cable Robot Using

DOE Office of Scientific and Technical Information (OSTI.GOV)

John M. Sweeten, Kalyan Annamalai

The Texas Panhandle is regarded as the 'Cattle Feeding Capital of the World', producing 42% of the fed beef cattle in the United States within a 200-mile radius of Amarillo generating more than 5 million tons of feedlot manure/year. Apart from feedlots, the Bosque River Region in Erath County, just north of Waco, Texas with about 110,000 dairy cattle in over 250 dairies, produces 1.8 million tons of manure biomass (excreted plus bedding) per year. While the feedlot manure has been used extensively for irrigated and dry land crop production, most dairies, as well as other concentrated animal feeding operationsmore » (CAFO's), the dairy farms utilize large lagoon areas to store wet animal biomass. Water runoff from these lagoons has been held responsible for the increased concentration of phosphorus and other contaminates in the Bosque River which drains into Lake Waco - the primary source of potable water for Waco's 108,500 people. The concentrated animal feeding operations may lead to land, water, and air pollution if waste handling systems and storage and treatment structures are not properly managed. Manure-based biomass (MBB) has the potential to be a source of green energy at large coal-fired power plants and on smaller-scale combustion systems at or near confined animal feeding operations. Although MBB particularly cattle biomass (CB) is a low quality fuel with an inferior heat value compared to coal and other fossil fuels, the concentration of it at large animal feeding operations can make it a viable source of fuel. The overall objective of this interdisciplinary proposal is to develop environmentally benign technologies to convert low-value inventories of dairy and beef cattle biomass into renewable energy. Current research expands the suite of technologies by which cattle biomass (CB: manure, and premature mortalities) could serve as a renewable alternative to fossil fuel. The work falls into two broad categories of research and development. Category 1 - Renewable Energy Conversion. This category addressed mostly in volume I involves developing. Thermo-chemical conversion technologies including cofiring with coal, reburn to reduce nitrogen oxide (NO, N2O, NOx, etc.) and Hg emissions and gasification to produce low-BTU gas for on-site power production in order to extract energy from waste streams or renewable resources. Category 2 - Biomass Resource Technology. This category, addressed mostly in Volume II, deals with the efficient and cost-effective use of CB as a renewable energy source (e.g. through and via aqueous-phase, anaerobic digestion or biological gasification). The investigators formed an industrial advisory panel consisting fuel producers (feedlots and dairy farms) and fuel users (utilities), periodically met with them, and presented the research results; apart from serving as dissemination forum, the PIs used their critique to red-direct the research within the scope of the tasks. The final report for the 5 to 7 year project performed by an interdisciplinary team of 9 professors is arranged in three volumes: Vol. I (edited by Kalyan Annamalai) addressing thermo-chemical conversion and direct combustion under Category 1 and Vol. II and Vol. III ( edited by J M Sweeten) addressing biomass resource Technology under Category 2. Various tasks and sub-tasks addressed in Volume I were performed by the Department of Mechanical Engineering (a part of TEES; see Volume I), while other tasks and sub-tasks addressed in Volume II and IIII were conducted by Texas AgriLife Research at Amarillo; the TAMU Biological and Agricultural Engineering Department (BAEN) College Station; and West Texas A and M University (WTAMU) (Volumes II and III). The three volume report covers the following results: fuel properties of low ash and high ash CB (particularly DB) and MB (mortality biomass) and coals, non-intrusive visible infrared (NVIR) spectroscopy techniques for ash determination, dairy energy use surveys at 14 dairies in Texas and California, cofiring of low quality CB with high quality coal, emission results and ash fouling behavior, using CB as reburn fuel for NOx and Hg reduction, gasification of fuels to produce low quality gases, modeling of reburn, pilot scale test results, synthesis of engineering characterization, geographical mapping, a transportation cost study to determine potential handling and transportation systems for co-firing with coal at regional coal-fired power plants, software analyses for the design of off-site manure, pre-processing and storage systems for a typical dairy farm or beef cattle feedlot, recursive production functions/systems models for both cattle feedlots, systems modeling, stocks and flows of energy involved in the CAFO system, feedback from an Industry Advisory Committee (IAC) to the investigators on project direction and task emphasis and economics of using CB as cofiring and reburn fuel.« less

RENEWABLE ENERGY AND ENVIRONMENTAL SUSTAINABILITY USING BIOMASS FROM DAIRY AND BEEF ANIMAL PRODUCTION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalyan Annamalai, John M. Sweeten,

The Texas Panhandle is regarded as the 'Cattle Feeding Capital of the World', producing 42% of the fed beef cattle in the United States within a 200-mile radius of Amarillo generating more than 5 million tons of feedlot manure/year. Apart from feedlots, the Bosque River Region in Erath County, just north of Waco, Texas with about 110,000 dairy cattle in over 250 dairies, produces 1.8 million tons of manure biomass (excreted plus bedding) per year. While the feedlot manure has been used extensively for irrigated and dry land crop production, most dairies, as well as other concentrated animal feeding operationsmore » (CAFO's), the dairy farms utilize large lagoon areas to store wet animal biomass. Water runoff from these lagoons has been held responsible for the increased concentration of phosphorus and other contaminates in the Bosque River which drains into Lake Waco - the primary source of potable water for Waco's 108,500 people. The concentrated animal feeding operations may lead to land, water, and air pollution if waste handling systems and storage and treatment structures are not properly managed. Manure-based biomass (MBB) has the potential to be a source of green energy at large coal-fired power plants and on smaller-scale combustion systems at or near confined animal feeding operations. Although MBB particularly cattle biomass (CB) is a low quality fuel with an inferior heat value compared to coal and other fossil fuels, the concentration of it at large animal feeding operations can make it a viable source of fuel. The overall objective of this interdisciplinary proposal is to develop environmentally benign technologies to convert low-value inventories of dairy and beef cattle biomass into renewable energy. Current research expands the suite of technologies by which cattle biomass (CB: manure, and premature mortalities) could serve as a renewable alternative to fossil fuel. The work falls into two broad categories of research and development. Category 1 - Renewable Energy Conversion. This category addressed mostly in volume I involves developing. Thermo-chemical conversion technologies including cofiring with coal, reburn to reduce nitrogen oxide (NO, N2O, NOx, etc.) and Hg emissions and gasification to produce low-BTU gas for on-site power production in order to extract energy from waste streams or renewable resources. Category 2 - Biomass Resource Technology. This category, addressed mostly in Volume II, deals with the efficient and cost-effective use of CB as a renewable energy source (e.g. through and via aqueous-phase, anaerobic digestion or biological gasification). The investigators formed an industrial advisory panel consisting fuel producers (feedlots and dairy farms) and fuel users (utilities), periodically met with them, and presented the research results; apart from serving as dissemination forum, the PIs used their critique to red-direct the research within the scope of the tasks. The final report for the 5 to 7 year project performed by an interdisciplinary team of 9 professors is arranged in three volumes: Vol. I (edited by Kalyan Annamalai) addressing thermo-chemical conversion and direct combustion under Category 1 and Vol. II and Vol. III ( edited by J M Sweeten) addressing biomass resource Technology under Category 2. Various tasks and sub-tasks addressed in Volume I were performed by the Department of Mechanical Engineering (a part of TEES; see Volume I), while other tasks and sub-tasks addressed in Volume II and IIII were conducted by Texas AgriLife Research at Amarillo; the TAMU Biological and Agricultural Engineering Department (BAEN) College Station; and West Texas A and M University (WTAMU) (Volumes II and III). The three volume report covers the following results: fuel properties of low ash and high ash CB (particularly DB) and MB (mortality biomass) and coals, non-intrusive visible infrared (NVIR) spectroscopy techniques for ash determination, dairy energy use surveys at 14 dairies in Texas and California, cofiring of low quality CB with high quality coal, emission results and ash fouling behavior, using CB as reburn fuel for NOx and Hg reduction, gasification of fuels to produce low quality gases, modeling of reburn, pilot scale test results, synthesis of engineering characterization, geographical mapping, a transportation cost study to determine potential handling and transportation systems for co-firing with coal at regional coal-fired power plants, software analyses for the design of off-site manure, pre-processing and storage systems for a typical dairy farm or beef cattle feedlot, recursive production functions/systems models for both cattle feedlots, systems modeling, stocks and flows of energy involved in the CAFO system, feedback from an Industry Advisory Committee (IAC) to the investigators on project direction and task emphasis and economics of using CB as cofiring and reburn fuel.« less

RENEWABLE ENERGY AND ENVIRONMENTAL SUSTAINABILITY USING BIOMASS FROM DAIRY AND BEEF ANIMAL PRODUCTION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sweeten, John M; Annamalai, Kalyan; Auvermann, Brent

The Texas Panhandle is regarded as the "Cattle Feeding Capital of the World", producing 42% of the fed beef cattle in the United States within a 200-mile radius of Amarillo generating more than 5 million tons of feedlot manure/year. Apart from feedlots, the Bosque River Region in Erath County, just north of Waco, Texas with about 110,000 dairy cattle in over 250 dairies, produces 1.8 million tons of manure biomass (excreted plus bedding) per year. While the feedlot manure has been used extensively for irrigated and dry land crop production, most dairies, as well as other concentrated animal feeding operationsmore » (CAFO's), the dairy farms utilize large lagoon areas to store wet animal biomass. Water runoff from these lagoons has been held responsible for the increased concentration of phosphorus and other contaminates in the Bosque River which drains into Lake Waco -- the primary source of potable water for Waco's 108,500 people. The concentrated animal feeding operations may lead to land, water, and air pollution if waste handling systems and storage and treatment structures are not properly managed. Manure-based biomass (MBB) has the potential to be a source of green energy at large coal-fired power plants and on smaller-scale combustion systems at or near confined animal feeding operations. Although MBB particularly cattle biomass (CB) is a low quality fuel with an inferior heat value compared to coal and other fossil fuels, the concentration of it at large animal feeding operations can make it a viable source of fuel. The overall objective of this interdisciplinary proposal is to develop environmentally benign technologies to convert low-value inventories of dairy and beef cattle biomass into renewable energy. Current research expands the suite of technologies by which cattle biomass (CB: manure, and premature mortalities) could serve as a renewable alternative to fossil fuel. The work falls into two broad categories of research and development. Category 1 -- Renewable Energy Conversion. This category addressed mostly in volume I involves developing. Thermo-chemical conversion technologies including cofiring with coal, reburn to reduce nitrogen oxide (NO, N2O, NOx, etc.) and Hg emissions and gasification to produce low-BTU gas for on-site power production in order to extract energy from waste streams or renewable resources. Category 2 -- Biomass Resource Technology. This category, addressed mostly in Volume II, deals with the efficient and cost-effective use of CB as a renewable energy source (e.g. through and via aqueous-phase, anaerobic digestion or biological gasification). The investigators formed an industrial advisory panel consisting fuel producers (feedlots and dairy farms) and fuel users (utilities), periodically met with them, and presented the research results; apart from serving as dissemination forum, the PIs used their critique to re-direct the research within the scope of the tasks. The final report for the 5 to 7 year project performed by an interdisciplinary team of 9 professors is arranged in three volumes: Vol. I (edited by Kalyan Annamalai) addressing thermo-chemical conversion and direct combustion under Category 1 and Vol. II and Vol. III ( edited by J M Sweeten) addressing biomass resource Technology under Category 2. Various tasks and sub-tasks addressed in Volume I were performed by the Department of Mechanical Engineering (a part of TEES; see Volume I), while other tasks and sub-tasks addressed in Volume II and IIII were conducted by Texas AgriLife Research at Amarillo; the TAMU Biological & Agricultural Engineering Department (BAEN) College Station; and West Texas A&M University (WTAMU) (Volumes II and III). The three volume report covers the following results: fuel properties of low ash and high ash CB (particularly DB) and MB (mortality biomass and coals, non-intrusive visible infrared (NVIR) spectroscopy techniques for ash determination, dairy energy use surveys at 14 dairies in Texas and California, cofiring of low quality CB with high quality coal, emission results and ash fouling behavior, using CB as reburn fuel for NOx and Hg reduction, gasification of fuels to produce low quality gases, modeling of reburn, pilot scale test results, synthesis of engineering characterization, geographical mapping, a transportation cost study to determine potential handling and transportation systems for co-firing with coal at regional coal-fired power plants, software analyses for the design of off-site manure, pre-processing and storage systems for a typical dairy farm or beef cattle feedlot, recursive production functions/systems models for both cattle feedlots, systems modeling, stocks and flows of energy involved in the CAFO system, feedback from an Industry Advisory Committee (IAC) to the investigators on project direction and task emphasis and economics of using CB as cofiring and reburn fuel.« less

RENEWABLE ENERGY AND ENVIRONMENTAL SUSTAINABILITY USING BIOMASS FROM DAIRY AND BEEF ANIMAL PRODUCTION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sweeten, John; Annamalai, Kalyan; Auvermann, Brent

The Texas Panhandle is regarded as the "Cattle Feeding Capital of the World", producing 42% of the fed beef cattle in the United States within a 200-mile radius of Amarillo generating more than 5 million tons of feedlot manure /year. Apart from feedlots, the Bosque River Region in Erath County, just north of Waco, Texas with about 110,000 dairy cattle in over 250 dairies, produces 1.8 million tons of manure biomass (excreted plus bedding) per year. While the feedlot manure has been used extensively for irrigated and dry land crop production, most dairies, as well as other concentrated animal feedingmore » operations (CAFO's), the dairy farms utilize large lagoon areas to store wet animal biomass. Water runoff from these lagoons has been held responsible for the increased concentration of phosphorus and other contaminates in the Bosque River which drains into Lake Waco—the primary source of potable water for Waco's 108,500 people. The concentrated animal feeding operations may lead to land, water, and air pollution if waste handling systems and storage and treatment structures are not properly managed. Manure-based biomass (MBB) has the potential to be a source of green energy at large coal-fired power plants and on smaller-scale combustion systems at or near confined animal feeding operations. Although MBB particularly cattle biomass (CB) is a low quality fuel with an inferior heat value compared to coal and other fossil fuels, the concentration of it at large animal feeding operations can make it a viable source of fuel. The overall objective of this interdisciplinary proposal is to develop environmentally benign technologies to convert low-value inventories of dairy and beef cattle biomass into renewable energy. Current research expands the suite of technologies by which cattle biomass (CB: manure, and premature mortalities) could serve as a renewable alternative to fossil fuel. The work falls into two broad categories of research and development. Category 1 – Renewable Energy Conversion. This category addressed mostly in volume I involves developing. Thermo-chemical conversion technologies including cofiring with coal, reburn to reduce nitrogen oxide (NO, N2O, NOx, etc.) and Hg emissions and gasification to produce low-BTU gas for on-site power production in order to extract energy from waste streams or renewable resources. Category 2 – Biomass Resource Technology. This category, addressed mostly in Volume II, deals with the efficient and cost-effective use of CB as a renewable energy source (e.g. through and via aqueous-phase, anaerobic digestion or biological gasification). The investigators formed an industrial advisory panel consisting fuel producers (feedlots and dairy farms) and fuel users (utilities), periodically met with them, and presented the research results; apart from serving as dissemination forum, the PIs used their critique to red-direct the research within the scope of the tasks. The final report for the 5 to 7 year project performed by an interdisciplinary team of 9 professors is arranged in three volumes: Vol. I (edited by Kalyan Annamalai) addressing thermo-chemical conversion and direct combustion under Category 1 and Vol. II and Vol. III ( edited by J M Sweeten) addressing biomass resource Technology under Category 2. Various tasks and sub-tasks addressed in Volume I were performed by the Department of Mechanical Engineering (a part of TEES; see Volume I), while other tasks and sub-tasks addressed in Volume II and IIII were conducted by Texas AgriLife Research at Amarillo; the TAMU Biological & Agricultural Engineering Department (BAEN) College Station; and West Texas A&M University (WTAMU) (Volumes II and III). The three volume report covers the following results: fuel properties of low ash and high ash CB (particularly DB) and MB (mortality biomass and coals, non-intrusive visible infrared (NVIR) spectroscopy techniques for ash determination, dairy energy use surveys at 14 dairies in Texas and California, cofiring of low quality CB with high quality coal, emission results and ash fouling behavior, using CB as reburn fuel for NOx and Hg reduction, gasification of fuels to produce low quality gases, modeling of reburn, pilot scale test results, synthesis of engineering characterization, geographical mapping, a transportation cost study to determine potential handling and transportation systems for co-firing with coal at regional coal-fired power plants, software analyses for the design of off-site manure, pre-processing and storage systems for a typical dairy farm or beef cattle feedlot, recursive production functions/systems models for both cattle feedlots, systems modeling, stocks and flows of energy involved in the CAFO system, feedback from an Industry Advisory Committee (IAC) to the investigators on project direction and task emphasis and economics of using CB as cofiring and reburn fuel.« less

QuEST: Qualifying Environmentally Sustainable Technologies. Vol. 3

NASA Technical Reports Server (NTRS)

Lewis, Pattie (Editor)

2008-01-01

This is an exciting new chapter for the NASA Technology Evaluation for Environmental Risk Mitigation Principal Center (TEERM). The Principal Center's past successes have created new opportunities for partnership and technology implementation. TEERM is continuing to support the current NASA Programs while reaching out and offering our assistance and experience to Constellation. NASA has also assumed Chairmanship responsibility of the Joint Group on Pollution Prevention (JG-PP) and Chairmanship of the JG-PP Working Group (WG). Both JG-PP and TEERM strive to improve mission readiness and reduce risk to personnel and assets by solving joint problems through cooperation. JG-PP and TEERM not only show our commitment to environmental stewardship, but also our commitment to fiscal responsibility.

Modelling of Command and Control Agility

DTIC Science & Technology

2014-06-01

in the system (Janlert & Stolterman 2010, Reiman & Oedewald 2007, Lintern 2012, Bahill & Gissing 1998). 4 The causes of C2 system complexity...Research Methodology for Information Systems Research. Journal of Management Information Systems, Vol. 24, Issue 3: 45-77. Reiman , T. & Oedewald, P

Progress in cybernetics and systems research. Vol. XI. Data base design. International Information Systems. Semiotic Systems. Artificial Intelligence. Cybernetics and Philosophy. Special aspects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trappl, R.; Findler, N.V.; Horn, W.

1982-01-01

This book covers current research topics in six areas. These are data base design, international information systems, semiotic systems, artificial intelligence, cybernetics and philosophy, and special aspects of systems research. 1326 references.

A Geochemical and Petrological Investigation into the causes of Immiscibility at the San Rafael Volcanic Field, Utah

NASA Astrophysics Data System (ADS)

Koebli, D. J.; Germa, A.; Wetmore, P. H.; Atlas, Z. D.

2017-12-01

The San Rafael Volcanic Field (SRVF), Utah, is a 4.6 Ma exposed volcanic plumbing system consisting of comagmatic dikes, sills and conduits. Sills were emplaced in a syn-eruptive time frame, given the comagmatism between them and conduits. Dikes and conduits consist of shonkinite, whereas in the sills, silicate liquid immiscibility led to the separation of a felsic phase from the mafic injected melt (Williams, 1983); resulting in syenite (50.8 wt% SiO2) being enclosed within shonkinite (45.8 wt% SiO2). To determine storage and differentiation parameters leading to liquid immiscibility within the sills, we compared mineral composition (determined by EPMA) to corresponding whole rock major and trace element data. Results support the hypothesis of a hydrated magma with hornblende (4% vol. in shonkinite, 23% vol. in syenite), biotite (10% vol. in shonkinite and 21% in syenite), altered olivine (20% vol. in shonkinite with 10% serpentine, and 5% vol. in syenite with 2% serpentine), pyroxene (30% vol. in shonkinite and 17% in syenite), and plagioclase (17% vol. in shonkinite - mostly matrix - and 30% in syenite). Potassic feldspar (<2% vol.) are present in syenite only. Many of the volcanic units have sandstone xenoliths entrained in both shonkinite and syenite. A relatively hot magma ( 1300 ˚C) is assumed based off of the compositions of olivine (Fo80-90) and plagioclase (An95-35); plagioclase compositions are based off of plotted mineral data which show a continuous trend. This temperature is confirmed by thermodynamic calculations and Rhyolite-MELTS modeling (Ghiorso et al, 2012; Ghiorso et al, 2015). Thermodynamic modeling also supports liquid immiscibility occurring within the sills due to mineral phases (olivine>magnetite>pyroxene) forming at different pressures and temperatures, repeatedly (ex: olivine at 700 bar and 150 bar). Results indicate a lithospheric magma source due to asthenospheric upwelling, which later differentiated in-situ within the sills as a result of immiscibility at a shallow pressure ( 50-27 bar); this led to a mafic, volatile-poor melt (shonkinite), and a felsic, viscous, volatile-rich melt (syenite) which is visible as veins, ocelli and lenses.

JPRS Report, Science & Technology, USSR: Chemistry.

DTIC Science & Technology

1988-07-06

During Hydrodynamic Cavitation [A. V. Yefimov, G.A. Vorobyev; ZHURNAL FIZICHESKOY KHIMII No 1, Jan 88] 7 COMBUSTION AND EXPLOSIVES Suppression of...RSR", 1988 12770 Microhits and Luminescent Flashes During Hydrodynamic Cavitation 18410249b Moscow ZHURNAL FIZICHESKOY KHIMII in Russian Vol 62, No...monitor the occurrence of hydrodynamic cavitation and make an online estimate of its erosion activity by using devices based on photomultiplier tubes

Emulsified Zero-Valent Nano-Scale Iron Treatment of Chlorinated Solvent DNAPL Source Areas

DTIC Science & Technology

2010-09-01

Significant laboratory and field research has demonstrated that zero-valent metals will reductively dehalogenate dissolved chlorinated solvents such as...Eekert, Servé W. M. Kengen, Gosse Schraa, and Alfons J. M. Stams. 1999. Anaerobic Microbial Reductive Dehalogenation of Chlorinated Ethenes...and T. Holdsworth. 2005. Field Demonstration of DNAPL Dehalogenation Using Emulsified Zero-Valent Iron. Environmental Science Technology, vol 39

UXO Navigation Technology

DTIC Science & Technology

2008-10-01

modeling operator and dobs is the observed data (details in Pasion 2007). Figure 42. Geometry of EM61HH-MK2 sensor. The transmitter and receiver...1979. Stochastic models, estimation, and control (Vol. 141). Pasion , L. R., 2007. Inversion of Time Domain Electromagnetic Data for the Detection of...Unexploded Ordnance. Ph.D. Thesis, The University of British Columbia. Pasion , L. R., Oldenburg, D. W., 2001. A Discrimination Algorithm for UXO

Phased Array Theory and Technology

DTIC Science & Technology

1981-07-01

Generalized Array Coordinates 2. Linear, Planar and Circular Art -ays 3. Periodic fwo Dimensional ^rras 4. Grating Lobe Lattices 5. 1’llenienl...formal and low profile antennas, antennas for limited sector coverage, and wide- band array feeds. To aid designers, there is an attempt to give ...ol Vol. 2, Elliott gives convenient formulas lor the directivity of Imear dipole arrays, and derives an especially simple form tor arrays

JPRS Report, Science & Technology, USSR: Life Sciences.

DTIC Science & Technology

1989-02-01

Cytokinins in Transgenic Nicotiana Tabacum Plants [V. M. Zakharyev, A. Sh. Tashpulatov, et al.; DOKLADY AKADEMIINAUK SSSR, Vol 301 No 3, Jul 88] 18...and flowers . Objective evaluation of the quality of plant materials is impossible without the use of modern immu- nodiagnosis methods which...deriving diagnostic antisera. The diagnostics are automated. Pure viral antigens for potatoes and a number of other crops have been developed on the

Cortical Substrate of Haptic Representation

DTIC Science & Technology

1993-08-24

experience and data from primates , we have developed computational models of short-term active memory. Such models may have technological interest...neurobiological work on primate memory. It is on that empirical work that our current theoretical efforts are 5 founded. Our future physiological research...Academy of Sciences, New York, vol. 608, pp. 318-329, 1990. J.M. Fuster - Behavioral electrophysiology of the prefrontal cortex of the primate . Progress

A Novel Data-Driven Learning Method for Radar Target Detection in Nonstationary Environments

DTIC Science & Technology

2016-05-01

Classifier ensembles for changing environments,” in Multiple Classifier Systems, vol. 3077, F. Roli, J. Kittler and T. Windeatt, Eds. New York, NY...Dec. 2006, pp. 1113–1118. [21] J. Z. Kolter and M. A. Maloof, “Dynamic weighted majority: An ensemble method for drifting concepts,” J. Mach. Learn...Trans. Neural Netw., vol. 22, no. 10, pp. 1517–1531, Oct. 2011. [23] R. Polikar, “ Ensemble learning,” in Ensemble Machine Learning: Methods and

Theory of Soliton Waves.

DTIC Science & Technology

1984-11-01

equation of Kadomtsev and Petviashvili (1970): (ut + 6uu x + U )x = 3 a Uyy, 0 - ± 1. (12) This equation turns out to be integrable for a = ± 1. For...1982b: "Comments on Inverse Scattering for the Kadomtsev - Petviashvili equation ", in Math methods in Hydro. & Integrability in Dyn. Systems, A. I. P. Conf...358. . Joseph, R. I., 1977: J. Phys. A., vol 10, p L225-L227. Kadomtsev , B. B. and Petviashvili , V. I., 1970: Soy. Phys. Doklady, vol 15, pp 539-541

Proceedings of Symposium on Energy Engineering in the 21st Century (SEE 2000). Volume Two

DTIC Science & Technology

2000-01-13

International Journal of Hybrid Microelectronics, Vol.7, pp. 1-9 (1984). 2. T. Burd, "CPU information and system performance summary," Internet site, Http...and P. C. Wayner, "Evaporation from a Porous Flow Control Element on a Porous Heat Source", International Journal of Heat and Mass Transfer, Vol.16...28. I. M. N. A. Fareleira, S. F. Y. Li and W. A. Wakeham, International Journal of Thermophvsics, v. 10, pp. 1041 (1981). 29. Y. Wada, Y. Nagasaka

Spin and Magnetism: Two Transfer Matrix Formulations of a Classical Heisenberg Ring in a Magnetic Field.

DTIC Science & Technology

1998-06-01

determination of the partition function could be attempted. According to Gatteschi et al, however, [Ref. 15] when commenting on the quantum mechanical...1995 15. Gatteschi , D. et al, "Large Clusters of Metal Ions: The Transition from Molecular to Bulk Magnets" Science vol. 265, pp. 1054-1058, August... Gatteschi , D. et al, "Spin Dynamics in Mesoscopic Size Magnetic Systems... ", Phys. Rev. B, vol. 55, no. 21, 01 June, 1997 18. Tejeda, J. etal, "Quantum

Source Localization in a Cognitive Radio Environment Consisting of Frequency and Spatial Mobility

DTIC Science & Technology

2011-12-01

are designed to track position over time using a wireless RF sensor network, such as Kalman filtering [13]. 74 THIS PAGE INTENTIONALLY LEFT BLANK...Radio,” Proceedings of the IEEE, vol. 97, no. 4, pp. 612–625, Apr. 2009. 80 [12] J. B. Bernthal, T. X. Brown , D. N. Hatfield, D. C. Sicker, P. A... Kalman Filtering in Wireless Sensor Networks,” IEEE Control Systems, vol. 30, no. 2, pp. 66–86, April 2010. [14] J. Nemeroff, L. Garcia, D

Federal Logistics Information System (FLIS) Procedures Manual, Volume 1, Change 1

DTIC Science & Technology

1996-07-01

Se- 2 KAT Add FLIS Data Base Data 1 curity Classified Characteristics KDZ Delete Logistics Transfer 3 Data KFA Match Through Association I KFC File...a Cancelled menus normally furnished with this DIC NSNIPSCN, Related Generic or (2) the segment Z data pertains to an NSN. or Reference Number FSC...8/9 KEC Output Exceeds AUTODIN Limitations 4,5 vols 8/9 KFA Match through Association 4 vols 8/9 KFC File Data Minus Security Classified Character- 4

Magnetic Control of Hypersonic Flow

NASA Astrophysics Data System (ADS)

Poggie, Jonathan; Gaitonde, Datta

2000-11-01

Electromagnetic control is an appealing possibility for mitigating the thermal loads that occur in hypersonic flight, in particular for the case of atmospheric entry. There was extensive research on this problem between about 1955 and 1970,(M. F. Romig, ``The Influence of Electric and Magnetic Fields on Heat Transfer to Electrically Conducting Fluids,'' \\underlineAdvances In Heat Transfer), Vol. 1, Academic Press, NY, 1964. and renewed interest has arisen due to developments in the technology of super-conducting magnets and the understanding of the physics of weakly-ionized, non-equilibrium plasmas. In order to examine the physics of this problem, and to evaluate the practicality of electromagnetic control in hypersonic flight, we have developed a computer code to solve the three-dimensional, non-ideal magnetogasdynamics equations. We have applied the code to the problem of magnetically-decelerated hypersonic flow over a sphere, and observed a reduction, with an applied dipole field, in heat flux and skin friction near the nose of the body, as well as an increase in shock standoff distance. The computational results compare favorably with the analytical predictions of Bush.(W. B. Bush, ``Magnetohydrodynamic-Hypersonic Flow Past a Blunt Body'', Journal of the Aero/Space Sciences, Vol. 25, No. 11, 1958; ``The Stagnation-Point Boundary Layer in the Presence of an Applied Magnetic Field'', Vol. 28, No. 8, 1961.)

1200 to 1400 K slow strain rate compressive properties of NiAl/Ni2AlTi-base materials

NASA Technical Reports Server (NTRS)

Whittenberger, J. Daniel; Viswanadham, R. K.; Mannan, S. K.; Kumar, K. S.

1989-01-01

An attempt to apply the Martin Marietta Corporation's XD technology to the fabrication of NiAl-Ni2AlTi materials with improved creep properties is presented. Composite materials, containing from 0 to 30 vol pct of nominally 1-micron-diameter TiB2 particles in the intermetallic matrix have been produced by the XD process and compacted by hot pressing. Such composites demonstrated significant strength increases, approaching 3-fold for the 20 vol pct materials, in comparison to the unreinforced aluminide. This behavior was accomplished without deleterious side effects as the grain boundaries and particle-matrix interfaces were intact after compressive deformation to 10 percent or more strain. Typical true compressive stress-strain diagrams for materials tested in air between 1200 and 1400 K at approximate strain rates of 1.7 x 10 to the -6th/sec are presented.

The Model Intercomparison Project on the Climatic Response to Volcanic Forcing (VolMIP): Experimental Design and Forcing Input Data for CMIP6

NASA Technical Reports Server (NTRS)

Zanchettin, Davide; Khodri, Myriam; Timmreck, Claudia; Toohey, Matthew; Schmidt, Anja; Gerber, Edwin P.; Hegerl, Gabriele; Robock, Alan; Pausata, Francesco; Ball, William T.;

Course Management Systems: Traveling Beyond Powerpoint Slides Online

NASA Astrophysics Data System (ADS)

Gauthier, A. J.; Impey, C. D.

2004-12-01

Course management systems (CMS) like WebCT, Blackboard, Astronomica, etc., have reached and surpassed their tipping point in higher education. They are no longer a technology-trendy item to use in a course, but rather an expected supplement to undergraduate courses. There is a well known disconnect between the student population of ''digital natives'' (1) and higher education instructors, the ''digital immigrants'' (1). What expectations and technology skills do the new generations of undergraduates have? How can instructors easily meet their students' needs? What needs do instructors have and what resources are available to meet those needs? In the past, instructors would create their own HTML web pages to post class materials like PowerPoint slides, homework, and announcements. How does an instructor-created web resource differ from a secure university run CMS? How can you make your university or college's CMS system into a productive learning tool and not just a repository for class materials and grades? How can the astronomy instructor benefit from integrating a CMS into their course? What are common student attitudes regarding CMS usage in a course? How are instructors using CMSs in innovative ways? Where on your campus can you get free help designing and implementing a CMS resource for your students? This presentation aims to answer these questions. Extensive literature reviews, formal surveys, case study reports, and educational research from the instructional technology community inform our astronomy teaching community of the answers. Highlights from innovative systems and uses of CMSs in undergraduate Astro 101 classrooms will be presented. Resources and further references will be made available as handouts. (1) M. Prensky. ''Digital Natives, Digital Immigrants,'' On The Horizon, Vol.9, 2001.

Joint Tactical Information Distribution System (JTIDS). Class 3 Terminal Conceptual Study. Volume 4. Appendix A. Mission Profile Detail. Appendix B. Moments of the Decision Variable for preamble Detection

DTIC Science & Technology

1978-07-07

i on CM . ’ oil ■ «) rH H O W CO rH 0) H H <: o I »d • •o H i ! • M CO X -H | i iQ M 4> m u...referred to Electronic Systems Division, Hanscom AFB, MA. Document partially illegible. AFGL ltr 15 May 1981 A I ’ ESD-ra-7B-l6l, Vol. IV V,^^7 -J...BEPORE COMPLETING FORM ESD-TR-78-161, Vol. IV 2 COVT ACCESSION NO I RCCIFICNT’S CATALOG NUMBCn 4. TITLE (mid Submit) JTIDS Class

Report from ILEWG and Cape Canaveral Lunar Declaration 2008

NASA Astrophysics Data System (ADS)

Foing, B. H.

2009-04-01

We shall report on the ILEWG charter, goals and activities, on ICEUM "lunar declarations" and follow-up activities, with focus on societal questions, and the Cape Canaveral Lunar Declaration 2008. ILEWG charter: ILEWG , the International Lunar Exploration Working Group is a public forum created in 1994, sponsored by the world's space agencies to support "international cooperation towards a world strategy for the exploration and utilization of the Moon - our natural satellite". The charter of ILEWG is: - To develop an international strategy for the exploration of the Moon - To establish a forum and mechanisms for the communication and coordination of activities - To implement international coordination and cooperation - In order to facilitate communication among all interested parties ILEWG agrees to establish an electronic communication network for exchange of science, technology and programmatic information related to lunar activities ILEWG meets regularly, at least, once a year, and leads the organization of an International Conference in order to discuss the state of lunar exploration. Formal reports are given at COSPAR meetings and to space agencies. ILEWG is sponsored by the world's space agencies and is intended to serve three relevant groups: - actual members of the ILEWG, ie delegates and repre-sentatives of the participating Space Agencies and organizations - allowing them to discuss and possibly harmonize their draft concepts and plans - team members of the relevant space projects - allowing them to coordinate their internal work according to the guidelines provided by the Charter of the ILEWG - members of the general public and of the Lunar Explorer's Society who are interested and wish to be informed on the progress of the Moon projects and possibly contribute their own ideas ILEWG activities and working groups: ILEWG task groups include science, technology, human aspects, socio-economics, young explorers and outreach, programmatics, roadmaps and synergies with Mars exploration. Users can obtain information on how to participate, as well as details on the latest news and events regarding lunar exploration, forthcoming meetings, relevant reports and documents of importance for the work of the ILEWG, summary descriptions of current lunar exploration projects (such as SMART-1, Chang'E1, Selene, Chandrayaan-1, LRO, LCROSS) funded by various space agencies, and basic data on the Moon itself. Activities of the related space agencies and organizations can also be found. ILEWG has been organising International Conferences on Exploration and Utilisation of the Moon (ICEUM) since 1994, whose proceedings are published. It has also sponsored a number of activities, workshops, tasks groups and publications in collabora-tions with other organisations: COSPAR, space agencies, IAA, IAF, EGU (see references below). In accor-dance with its charter, ILEWG reports to COSPAR, and a summary was given at Montreal COSPAR2008 on ILEWG activities conducted since the previous COSPAR2006 assembly in Beijing. The recent ILEWG International Conference on Exploration and Utilisation of the Moon, were held respectively in Udaipur, India (ICEUM6, 2004), in Toronto, Canada (ICEUM7, 2005), in Beijing (ICEUM8, 2006), Sorrento (ICEUM9, 2007) and Port Canaveral (ICEUM10/LEAG/SRR, 2008 in conjunction with the NASA Lunar Exploration Analysis Groups and Space Resources Roundtable annual meetings). We'll report on the Cape Canaveral Lunar Declaration and on follow-up activities, in particular in coordination with space agencies, COSPAR and IAF. References: [1] 1st International Lunar Workshop, Balsiger H. et al., Editors, European Space Agency, 1994. ESA-SP-1170. [2] 2nd International Lunar Workshop, Kyoto, H. Mizutani, editor, Japan Space Forum Publisher, 1997. [3] 3rd International Lunar Workshop, Moscow 1998, E. Galimov, editor. [4] ICEUM4, ESTEC, 2000, ESA SP-462, B.H. Foing & M. Perry, editors. [5] ICEUM5, Hawaii Nov 2003, Durst S.M. et al, Editors, Vol 108, 1-576 pp, Science and Technology Series, American Astronautical Society, 2004. [6] ICEUM6, Udaipur 2004, Bhandari N., Editor, Journal Earth System Science, India, 114, No6, Dec 2005, pp. 573-841. [7] ICEUM7, Toronto Sept 2005, sci.esa.int/ilewg. [8] ICEUM8, Beijing July 2006, Journal of Chinese Society of Astronautics, Vol. 28 Sup., 2007, Ji W., Editor. [9] ICEUM9, Sorrento, Italy, Foing B., Espinasse S., Kosters G., Editors. http://sci.esa.int/iceum9, Dec. 2007), [11] Ehrenfreund, P., Foing, B.H., Cellino, A. Editors, The Moon and Near Earth Objects, ASR Vol 37, 1, 2006. [12] Foing, B.H. et al editors, 'Astronomy and Space Science from the Moon', ASR 14, 6, 1994. [13] Foing, B.H. et al, editor, Lunar Exploration, Planetary and Space Science, Vol 50, 14-15, 2002. [14] Foing, B.H., Heather, D. editors, 'Lunar Exploration 2000', ASR Vol 30, Nr 8, 2002. [15] Hunt-ress, W. et al 'The next steps in exploring deep space - A cosmic study by the IAA', Acta Astronautica, Vol 58, Issues 6-7, 2006, p302-377. [16] Ip W.-H., Foing, B.H., Masson Ph.L., editors, The Moon and Mars, ASR Vol 23, 11, 1999.

Flight Experience, Risk Taking, and Hazardous Attitudes in Glider Instructors (Experience de vol, Prise de Risque et Attitudes Dangereuses des Instructeurs de vol sur Planeur)

DTIC Science & Technology

2010-11-01

sur planeur . On a également examiné le rôle que jouent l’expérience de vol et la propension à prendre des risques dans le but d’anticiper les...données transversales, obtenues par l’observation de 144 instructeurs de vol sur planeur , en activité ou non, œuvrant dans cinq centres de vol à...137 Sommaire ..... Expérience de vol, prise de risque et attitudes dangereuses des instructeurs de vol sur planeur Ann-Renee Blais

Embryonic Alcohol Exposure Impairs the Dopaminergic System and Social Behavioral Responses in Adult Zebrafish

PubMed Central

Fernandes, Yohaan; Rampersad, Mindy

2015-01-01

Background: The zebrafish is a powerful neurobehavioral genetics tool with which complex human brain disorders including alcohol abuse and fetal alcohol spectrum disorders may be modeled and investigated. Zebrafish innately form social groups called shoals. Previously, it has been demonstrated that a single bath exposure (24 hours postfertilization) to low doses of alcohol (0, 0.25, 0.50, 0.75, and 1% vol/vol) for a short duration (2 hours) leads to impaired group forming, or shoaling, in adult zebrafish. Methods: In the current study, we immersed zebrafish eggs in a low concentration of alcohol (0.5% or 1% vol/vol) for 2 hours at 24 hours postfertilization and let the fish grow and reach adulthood. In addition to quantifying the behavioral response of the adult fish to an animated shoal, we also measured the amount of dopamine and its metabolite 3,4-dihydroxyphenylacetic acid from whole brain extracts of these fish using high-pressure liquid chromatograph. Results: Here we confirm that embryonic alcohol exposure makes adult zebrafish increase their distance from the shoal stimulus in a dose-dependent manner. We also show that the shoal stimulus increases the amount of dopamine and 3,4-dihydroxyphenylacetic acid in the brain of control zebrafish but not in fish previously exposed to alcohol during their embryonic development. Conclusions: We speculate that one of the mechanisms that may explain the embryonic alcohol-induced impaired shoaling response in zebrafish is dysfunction of reward mechanisms subserved by the dopaminergic system. PMID:25568285

Investigations in structural morphological and optical properties of Bi-Pb-S system thin films

NASA Astrophysics Data System (ADS)

Malika, Boukhalfa; Noureddine, Benramdane; Mourad, Medles; Abdelkader, Outzourhit; Attouya, Bouzidi; Hind, Tabet-derraz

Bi2S3, PbS and Bi-Pb-S system thin films were grown on glass substrates by the spray pyrolysis technique. The films growth was realized by the reaction of aqueous solutions of bismuth trichloride (BiCl3) and trihydrate Lead Acetate (TLA) (Pb(CH3COO)2.3H2O) with thiourea on heated substrates. The films study was performed as a function of the TLA volume ratio (TLA vol. ratio) in the solution obtained by the mixture of BiCl3 and thiourea used as precursor solution (PrS). X-ray diffraction (XRD), field emitting scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS) were used for structural and compositional analysis of the as deposited films. With the structural investigations, Bi2S3, PbS thin films and PbS-Bi2S3 composite thin films formation was confirmed. Optical properties of the deposited films were obtained using transmittance and reflectance measurements in the wavelength range [200-2500 nm]. The absorption edge shows a shift towards low energy with the increase of the TLA vol. ratio.The optical bandgaps for the films with various TLA vol. ratio are found to lie between those of the Bi2S3 and PbS ones. The optical parameters (extinction coefficient, refractive index, real and imaginary parts if the complex dielectric constant) of the thin films are also investigated. These are found to be dependent on the TLA vol. ratio.

An approach to modeling coupled thermal-hydraulic-chemical processes in geothermal systems

USGS Publications Warehouse

Palguta, Jennifer; Williams, Colin F.; Ingebritsen, Steven E.; Hickman, Stephen H.; Sonnenthal, Eric

2011-01-01

Interactions between hydrothermal fluids and rock alter mineralogy, leading to the formation of secondary minerals and potentially significant physical and chemical property changes. Reactive transport simulations are essential for evaluating the coupled processes controlling the geochemical, thermal and hydrological evolution of geothermal systems. The objective of this preliminary investigation is to successfully replicate observations from a series of hydrothermal laboratory experiments [Morrow et al., 2001] using the code TOUGHREACT. The laboratory experiments carried out by Morrow et al. [2001] measure permeability reduction in fractured and intact Westerly granite due to high-temperature fluid flow through core samples. Initial permeability and temperature values used in our simulations reflect these experimental conditions and range from 6.13 × 10−20 to 1.5 × 10−17 m2 and 150 to 300 °C, respectively. The primary mineralogy of the model rock is plagioclase (40 vol.%), K-feldspar (20 vol.%), quartz (30 vol.%), and biotite (10 vol.%). The simulations are constrained by the requirement that permeability, relative mineral abundances, and fluid chemistry agree with experimental observations. In the models, the granite core samples are represented as one-dimensional reaction domains. We find that the mineral abundances, solute concentrations, and permeability evolutions predicted by the models are consistent with those observed in the experiments carried out by Morrow et al. [2001] only if the mineral reactive surface areas decrease with increasing clay mineral abundance. This modeling approach suggests the importance of explicitly incorporating changing mineral surface areas into reactive transport models.

Field-based evaluation of semipermeable membrane devices (SPMDs) as passive air samplers of polyaromatic hydrocarbons (PAHs)

USGS Publications Warehouse

Bartkow, M.E.; Huckins, J.N.; Muller, J.F.

2004-01-01

Semipermeable membrane devices (SPMDs) have been used as passive air samplers of semivolatile organic compounds in a range of studies. However, due to a lack of calibration data for polyaromatic hydrocarbons (PAHs), SPMD data have not been used to estimate air concentrations of target PAHs. In this study, SPMDs were deployed for 32 days at two sites in a major metropolitan area in Australia. High-volume active sampling systems (HiVol) were co-deployed at both sites. Using the HiVol air concentration data from one site, SPMD sampling rates were measured for 12 US EPA Priority Pollutant PAHs and then these values were used to determine air concentrations at the second site from SPMD concentrations. Air concentrations were also measured at the second site with co-deployed HiVols to validate the SPMD results. PAHs mostly associated with the vapour phase (Fluorene to Pyrene) dominated both the HiVol and passive air samples. Reproducibility between replicate passive samplers was satisfactory (CV<20%) for the majority of compounds. Sampling rates ranged between 0.6 and 6.1 m3 d-1. SPMD-based air concentrations were calculated at the second site for each compound using these sampling rates and the differences between SPMD-derived air concentrations and those measured using a HiVol were, on average, within a factor of 1.5. The dominant processes for the uptake of PAHs by SPMDs were also assessed. Using the SPMD method described herein, estimates of particulate sorbed airborne PAHs with five rings or greater were within 1.8-fold of HiVol measured values. ?? 2004 Elsevier Ltd. All rights reserved.

Inhibitory effects of some plant essential oils against Arcobacter butzleri and potential for rosemary oil as a natural food preservative.

PubMed

Irkin, Reyhan; Abay, Secil; Aydin, Fuat

2011-03-01

We investigated the inhibitory activity of commercially marketed essential oils of mint, rosemary, orange, sage, cinnamon, bay, clove, and cumin against Arcobacter butzleri and Arcobacter skirrowii and the effects of the essential oil of rosemary against A. butzleri in a cooked minced beef system. Using the disc diffusion method to determine the inhibitory activities of these plant essential oils against strains of Arcobacter, we found that those of rosemary, bay, cinnamon, and clove had strong inhibitory activity against these organisms, whereas the essential oils of cumin, mint, and sage failed to show inhibitory activity against most of the Arcobacter strains tested. The 0.5% (vol/wt) essential oil of rosemary was completely inhibitory against A. butzleri in the cooked minced beef system at 4°C. These essential oils may be further investigated as a natural solution to the food industry by creating an additional barrier (hurdle technology) to inhibit the growth of Arcobacter strains.

Advances in cryogenic engineering. Vols. 35A & 35B - Proceedings of the 1989 Cryogenic Engineering Conference, University of California, Los Angeles, July 24-28, 1989

NASA Astrophysics Data System (ADS)

Fast, R. W.

The book presents a review of literature on superfluid helium, together with papers under the topics on heat and mass transfer in He II; applications of He II for cooling superconducting devices in space; heat transfer to liquid helium and liquid nitrogen; multilayer insulation; applications of superconductivity, including topics on magnets and other devices, magnet stability and coil protection, and cryogenic techniques; and refrigeration for electronics. Other topics discussed include refrigeration of superconducting systems; the expanders, cold compressors, and pumps for liquid helium; dilution refrigerators; magnetic refrigerators; pulse tube refrigerators; cryocoolers for space applications; properties of cryogenic fluids; cryogenic instrumentation; hyperconducting devices (cryogenic magnets); cryogenic applications in space science and technology and in transportation; and miscellaneous cryogenic techniques and applications.

February 11, 2009, Subcommittee on Aviation Hearing on FAA Reauthorization Act of 2009 questions for the record.

DOT National Transportation Integrated Search

2009-02-01

The next generation air transportation system (NextGen) includes the : policies, procedures, and equipment that will allow satellite-based navigation in the : national airspace system. However, this systems ability to meet forecasted traffic : vol...

Increasing Efficiency by Maximizing Electrical Output

DTIC Science & Technology

2016-07-27

in a few limited areas, one being a geothermal flash plant at Naval Air Weapons Station China Lake. But, there are few other heat to electricity...generation sources (but, closest to geothermal because of the lack of combustion and the maintenance issues involved with combustion). [11] Clearly, a...of Energy Resources Technology, March 2009, Vol. 131 [4] “The Chena Hot Springs 400kW Geothermal Power Plant: Experience Gained During the First

JPRS Report, Science & Technology, USSR: Life Sciences

DTIC Science & Technology

1989-02-10

29 Effects of Regulatory Peptides on Recovery of Visual Functions in Retinitis Pigmentosa [N. B. Kostelyanets, O. B. Ilyinskiy, et al; FIZIOLOGIYA...Western. UDC 612.812 Effects of Regulatory Peptides on Recovery of Visual Functions in Retinitis Pigmentosa 18400030a Moscow FIZIOLOGIYA CHELOVEKA in...et al.; BIOORGANICHESKAYA KHIMIYA, Vol 14 No 3, Mar 88] .. 3 Synthesis and Properties of C13-Dependent Retinals [S. V. Yeremin, B. I. Mitsner, et

JPRS Report, Science & Technology, USSR: Life Sciences

DTIC Science & Technology

1987-07-09

87) 59 Prophylactic Effectiveness of Epsilon- Aminocaproic Acid (EACA) on Influenza in Mice (L.Ye. Puzis, V.P. Lozitskiy, et al.; ACTA VIROLOGICA...EFFECTIVENESS OF EPSILON- AMINOCAPROIC ACID (EACA) ON INFLUENZA IN MICE Bratislava ACTA VIROLOGICA in Russian Vol 30, No 1, Jan 86 (manuscript received 17...MEDITSINSKOY KHIMII, No 4, Jul-Aug 86) 59 Effects of Novel Antineoplastic Blastozole on Nucleic Acid Levels and DNA Synthesis in Cancer Cells (S.N

JPRS Report, Science & Technology. China: Stealth/Counter-Stealth Research.

DTIC Science & Technology

1992-11-19

Frequency-Selective Surfaces 92FE0801F Beijing DIANZIXUEBAO [ACTA ELECTRONICA SINICA] in Chinese Vol 20 No 6, Jun 92 pp 85-88 [Article by Shen...microwave devices and electromag- netic scattering. Motion Compensation Method in ISAR Imaging 92FE0801A Beijing DIANZIXUEBAO [ACTA ELECTRONICA ...Chinese Society of Electronics and an editor of DIANZI XUEBAO [ACTA ELECTRONICA SINICA]. Deng Wenbiao Born in February 1961, he graduated from the

Modularly Integrated MEMS Technology

DTIC Science & Technology

2006-05-23

Letters, Vol.80, No.20, pp.3706-08, 2002. [3.9] N. R. Zangerberg, J. Fage- Pederson , J. L . Hansen, and A. N. Larsen, “Boron and Phosphorus diffusion in...on servers or to redistribute to lists, requires prior specific permission. Acknowledgement Tsu-Jae King, Roger T. Howe, Sanjay Govingjee, Nils...the GRADUATE DIVISION of the UNIVERSITY OF CALIFORNIA, BERKELEY Committee in Charge Tsu-Jae King, Chair Roger T. Howe Sanjay Govindjee

Alternative Fuel News: Official Publication of the Clean Cities Network and the Alternative Fuels Data Center, Vol. 5, No. 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2001-11-01

A quarterly magazine with articles on alternative fuel school buses, the market growth of biodiesel fuel, National AFV Day 2002, model year 2002 alternative fuel passenger cars and light trucks, the Michelin Challenge Bibendum road rally, and advanced technology vehicles at Robins Air Force Base, the Top Ten Clean Cities coalitions for 2000, and AFVs on college campuses.

Ultrasonic Guided Wave Technology for Non-Invasive Assessment of Corrosion-Induced Damage in Piping for Pollution Prevention in DOD Fuel Storage Facilities

DTIC Science & Technology

2011-08-01

using a mixture of rock salt and tap water. A combination of lacquer and duct tape was used to mask the desired corrosion areas and to prevent excessive...Corrosion Measurements," NDT efT E International, Vol. 37, No.3, 2004, pp. 167-180. Demma, A, P. Cawley, M. Lowe and B. Pavlakovic, "The Effect of

Acquisition Review Quarterly: Vol. 4, No. 2, Spring 1997

DTIC Science & Technology

1997-01-01

universities including the University of Southern California, the University of Chicago, George Mason Uni- versity, and the George Washington University...of competition in its were master’s theses from the Air Force analysis. Institute of Technology. Greer and Liao (1983) investigated con- Brost (1982...Postgradu- The Quarterly Journal of Economics, ate School, Monterey, CA, September. 681-707. Brost , E. J. (1982, September). A compara- Beltramo. M. N

Oak Ridge National Laboratory [ORNL] Review, Vol. 25, Nos. 3 and 4, 1992 [The First Fifty Years

DOE R&D Accomplishments Database

Krause, C.(ed.)

1992-01-01

In observation of the 50th anniversary of Oak Ridge National Laboratory, this special double issue of the Review contains a history of the Laboratory, complete with photographs, drawings, and short accompanying articles. Table of contents include: Wartime Laboratory; High-flux Years; Accelerating Projects; Olympian Feats; Balancing Act; Responding to Social Needs; Energy Technologies; Diversity and Sharing; Global Outreach; Epilogue

Customized Learning: Potential Air Force Applications

DTIC Science & Technology

2011-01-01

Technology in Education, Vol. 41, No. 2, Winter 2008–2009, pp. 143–159. Dee, Lesley, Cristina Devecchi, Lani Florian, and Steve Cochrane, Being, Having and...225–231. Krasner, Steve , ed., Learning Styles, Connecticut State Department of Education, SERC Library, 2002. As of September 30, 2009: http...Training Command, February 18, 2009. Torrance, Harry, Helen Colley, Dean Garratt, Janis Jarvis , Heather Piper, Kathryn Ecclestone, and David James, The

75 FR 8431 - Carbon Dioxide Fire Suppression Systems on Commercial Vessels

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... Fire Suppression Systems on Commercial Vessels; Proposed Rule #0;#0;Federal Register / Vol. 75 , No. 36... 1625-AB44 Carbon Dioxide Fire Suppression Systems on Commercial Vessels AGENCY: Coast Guard, DHS... for fire suppression systems on several classes of commercial vessels. The amendments would clarify...

Development and Optimization of a Dedicated, Hybrid Dual-Modality SPECT-CmT System for Improved Breast Lesion Diagnosis

DTIC Science & Technology

2008-01-01

CT contrast agent, four 6.0mm nylon balls (Small Parts, Inc. Miami Lakes, FL) soaked in aqueous 99mTc-pertechnetate were used as markers and taped ...Inc, Miramar, Fl) were soaked in concentrated aqueous 99mTc and taped to the exterior surface of the breast phantom to act as fiducial markers for...vol. 21, pp. 48-55, 2006. [16] H. Erdogan and J. A. Fessler, "Ordered subsets algorithms for transmission tomography," Phys Med Biol, vol. 44, pp

A Unified Methodology for Aerospace Systems Integration Based on Entropy and the Second Law of Thermodynamics: Aerodynamics Assessment

DTIC Science & Technology

2004-08-01

Based on Exergy Methods”, Journal of Aircraft Vol.40, No.1, January-February 2003. [2] Bejan, A., “Constructal Theory: Tree-Shaped Flows and Energy... Journal of Aircraft Vol. 36, No. 2, March- April 1999. [15] Bourdin, P., Numerical Prediction of Wing-Tip Effects On Lift-Induced Drag. International Council of the Aeronautical Sciences, 2002. ...methods were used to calculate the induced drag. The objective of this project is to relate work-potential losses ( exergy destruction) to the

Signal Processing Using Surface Acoustic Wave Devices and Its Application to Spread Spectrum Communication Systems.

DTIC Science & Technology

1979-12-13

I III| I IIG since t - T < T = t - L (W - i) _ t is a point of stationary phase. -2a o 1 Eq. (4.86) shows that the output of the chirp filter is the...Parametric Interactions in Delay-Line Devices", IEEE Transactions on Microwave Theory and Techniques, vol. MTT-21, no. 4, April 1973, pp. 2414-257...443-476. Martin, T. A., "The IMCON Pulse Compression Filter and its Applications", IE3 Transactions on Microwave Theory and Techniques, vol. 21

DEVELOPMENT OF DIES FOR EXTRUSION OF COMPLEX SHAPES OF STEEL AND REFRACTORY ALLOYS. Interim Technical Documentary Progress Report to Aeronautical Systems Division for the Period September 16,1962 through December 31, 1962

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunt, J.G.; Jenkins, R.G.; White, A.M.

1963-03-01

A number of ceramics, metallic compounds, and ceramic-metal composites were successfully hot pressed into the shape of die inserts. Steels were extruded through several of these for the purpose of evaluating the materials or to study methods of supporting the die inserts. Refractory metal inserts were also used in similar tests. Hot pressed inserts consisting of 80 vo1% Al/sub 2/O/ sub 3/--10 vol% W and 80 vol% ThO/sub 2/--10 vol% W cracked but did not erode. Sintered molybdenum inserts flowed excessively, whereas sintered tungsten inserts flowed to a lesser degree. A hard die casing with a slight shrink fit appearsmore » to be the most satisfactory method of support. (auth)« less

A quantitative method for estimating dermal benzene absorption from benzene-containing hydrocarbon liquids.

PubMed

Petty, Stephen E; Nicas, Mark; Boiarski, Anthony A

2011-01-01

This study examines a method for estimating the dermal absorption of benzene contained in hydrocarbon liquids that contact the skin. This method applies to crude oil, gasoline, organic solvents, penetrants, and oils. The flux of benzene through occluded skin as a function of the percent vol/vol benzene in the liquid is derived by fitting a curve to experimental data; the function is supralinear at benzene concentrations < or = 5% vol/vol. When a liquid other than pure benzene is on nonoccluded skin, benzene may preferentially evaporate from the liquid, which thereby decreases the benzene flux. We present a time-averaging method here for estimating the reduced dermal flux during evaporation. Example calculations are presented for benzene at 2% vol/vol in gasoline, and for benzene at 0.1% vol/vol in a less volatile liquid. We also discuss other factors affecting dermal absorption.

Blood Program in World War II. Medical Department, United States Army

DTIC Science & Technology

1964-01-01

Branch Lieutenant Colonel JEROME RUDBERG, MSC, USA, Chief, Information Activities Branch RODERICK M. ENGERT, Chief, General Reference and Research... Activities of Medical Consultants Vol. II. Infectious Diseases Preventive Medicine in World War II: Vol. II. Environmental Hygiene Vol. III. Personal...Other Than Malaria Vr VIII Surgery in World War II: Activities of Surgical Consultants, vol. I Activities of Surgical Consultants, vol. II General

Big Data GPU-Driven Parallel Processing Spatial and Spatio-Temporal Clustering Algorithms

NASA Astrophysics Data System (ADS)

Konstantaras, Antonios; Skounakis, Emmanouil; Kilty, James-Alexander; Frantzeskakis, Theofanis; Maravelakis, Emmanuel

2016-04-01

Advances in graphics processing units' technology towards encompassing parallel architectures [1], comprised of thousands of cores and multiples of parallel threads, provide the foundation in terms of hardware for the rapid processing of various parallel applications regarding seismic big data analysis. Seismic data are normally stored as collections of vectors in massive matrices, growing rapidly in size as wider areas are covered, denser recording networks are being established and decades of data are being compiled together [2]. Yet, many processes regarding seismic data analysis are performed on each seismic event independently or as distinct tiles [3] of specific grouped seismic events within a much larger data set. Such processes, independent of one another can be performed in parallel narrowing down processing times drastically [1,3]. This research work presents the development and implementation of three parallel processing algorithms using Cuda C [4] for the investigation of potentially distinct seismic regions [5,6] present in the vicinity of the southern Hellenic seismic arc. The algorithms, programmed and executed in parallel comparatively, are the: fuzzy k-means clustering with expert knowledge [7] in assigning overall clusters' number; density-based clustering [8]; and a selves-developed spatio-temporal clustering algorithm encompassing expert [9] and empirical knowledge [10] for the specific area under investigation. Indexing terms: GPU parallel programming, Cuda C, heterogeneous processing, distinct seismic regions, parallel clustering algorithms, spatio-temporal clustering References [1] Kirk, D. and Hwu, W.: 'Programming massively parallel processors - A hands-on approach', 2nd Edition, Morgan Kaufman Publisher, 2013 [2] Konstantaras, A., Valianatos, F., Varley, M.R. and Makris, J.P.: 'Soft-Computing Modelling of Seismicity in the Southern Hellenic Arc', Geoscience and Remote Sensing Letters, vol. 5 (3), pp. 323-327, 2008 [3] Papadakis, S. and Diamantaras, K.: 'Programming and architecture of parallel processing systems', 1st Edition, Eds. Kleidarithmos, 2011 [4] NVIDIA.: 'NVidia CUDA C Programming Guide', version 5.0, NVidia (reference book) [5] Konstantaras, A.: 'Classification of Distinct Seismic Regions and Regional Temporal Modelling of Seismicity in the Vicinity of the Hellenic Seismic Arc', IEEE Selected Topics in Applied Earth Observations and Remote Sensing, vol. 6 (4), pp. 1857-1863, 2013 [6] Konstantaras, A. Varley, M.R.,. Valianatos, F., Collins, G. and Holifield, P.: 'Recognition of electric earthquake precursors using neuro-fuzzy models: methodology and simulation results', Proc. IASTED International Conference on Signal Processing Pattern Recognition and Applications (SPPRA 2002), Crete, Greece, 2002, pp 303-308, 2002 [7] Konstantaras, A., Katsifarakis, E., Maravelakis, E., Skounakis, E., Kokkinos, E. and Karapidakis, E.: 'Intelligent Spatial-Clustering of Seismicity in the Vicinity of the Hellenic Seismic Arc', Earth Science Research, vol. 1 (2), pp. 1-10, 2012 [8] Georgoulas, G., Konstantaras, A., Katsifarakis, E., Stylios, C.D., Maravelakis, E. and Vachtsevanos, G.: '"Seismic-Mass" Density-based Algorithm for Spatio-Temporal Clustering', Expert Systems with Applications, vol. 40 (10), pp. 4183-4189, 2013 [9] Konstantaras, A. J.: 'Expert knowledge-based algorithm for the dynamic discrimination of interactive natural clusters', Earth Science Informatics, 2015 (In Press, see: www.scopus.com) [10] Drakatos, G. and Latoussakis, J.: 'A catalog of aftershock sequences in Greece (1971-1997): Their spatial and temporal characteristics', Journal of Seismology, vol. 5, pp. 137-145, 2001

40 CFR 80.82 - Butane blending.

Code of Federal Regulations, 2011 CFR

2011-07-01

...% aromatics≤2.0 vol% benzene≤0.03 vol% sulfur≤140 ppm until December 31, 2003; ≤120 ppm in 2004; ≤30 ppm... results demonstrate the butane has the following properties: olefins≤10.0 vol% aromatics≤2.0 vol% benzene...

40 CFR 80.82 - Butane blending.

Code of Federal Regulations, 2010 CFR

2010-07-01

...% aromatics≤2.0 vol% benzene≤0.03 vol% sulfur≤140 ppm until December 31, 2003; ≤120 ppm in 2004; ≤30 ppm... results demonstrate the butane has the following properties: olefins≤10.0 vol% aromatics≤2.0 vol% benzene...

Characterization Of Commonly Encountered Explosives Using Highfield Asymmetric Waveform Ion Mobility Spectrometry Coupled With Mass Spectrometry

DTIC Science & Technology

2007-05-01

symptoms depending on the relative concentration, even leading to death.32 2.4. Instrument Settings Both positive and negative ions can be formed...Detection Technology, pp. 619-633, 1992. 7. Osorio, Celia ; Gomez, Lewis M.; Hernandez, Samuel P.; Castro, Miguel E., Time-of- flight Mass Spectroscopy...vol. 15, pp. 1950-1952. 34. Federal Facilities Assessment Branch, Public Health Assessment, US Army Umatilla Depot Activity, Centers for Disease

Decomposition Measurements of RP-1, RP-2, JP-7, n-Dodecane, and Tetrahydroquinoline in Shock Tubes (Preprint)

DTIC Science & Technology

2010-11-23

Pressure. First article. Cracking normal paraffin hydrocarbons,” Foreign Petroleum Technology , Vol. 7, No. 5/6, 1939, pp. 209-224. [7] Greensfelder...hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and...completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information

The Sudan and Development of Post Conflict Indicators

DTIC Science & Technology

2011-08-01

Dying for Peace”. Review of African Political Economy Vol. 33, No. 108, North Africa : Power, Politics & Promise (Jun., 2006), pp. 326 15 J. J. Welling...groups in Sudan had relations with a wide range of culture in north and northeast Africa , but its closest ties were with the inhabitants of...New York 10996 August 2011 Report 2011-4 DTIC: ADA547383 Prepared For United States Africa Command OSD Science and Technology Advisor Unit

Atmospheric Propagation and Combining of High-Power Lasers

DTIC Science & Technology

2015-09-08

Brightness-scaling potential of actively phase- locked solid state laser arrays,” IEEE J. Sel. Topics Quantum Electron., vol. 13, no. 3, pp. 460–472, May...attempting to phase- lock high-power lasers, which is not encountered when phase- locking low-power lasers, for example mW power levels. Regardless, we...technology does not currently exist. This presents a challenging problem when attempting to phase- lock high-power lasers, which is not encountered when

Terahertz Radiation: A Non-contact Tool for the Selective Stimulation of Biological Responses in Human Cells

DTIC Science & Technology

2014-01-01

computational and empirical dosimetric tools [31]. For the computational dosimetry, we employed finite-dif- ference time- domain (FDTD) modeling techniques to...temperature-time data collected for a well exposed to THz radiation using finite-difference time- domain (FDTD) modeling techniques and thermocouples... like )). Alter- ation in the expression of such genes underscores the signif- 62 IEEE TRANSACTIONS ON TERAHERTZ SCIENCE AND TECHNOLOGY, VOL. 6, NO. 1

Cavitation-Resistant Coatings for Hydropower Turbines

DTIC Science & Technology

2011-06-01

jay, GA . The Corps’ corporate practice has been almost exclusively to use 308 and 309 weld rod for cavitation repair. No other material has been...Turbines and Pumps : A Technical Note, Journal of Thermal Spray Technology, Vol. 14(2): 177–182 (June 2005). 6. C. L. Cheng, C.T. Webster, and J.Y...Tested on a Venturi Cavitation Testing Machine, Denver, CO: Bureau of Rec- lamation, Research Laboratory and Services Division (January 1994). 9. O. F

Defense AT and L Magazine. vol. 46, no. 6, November-December 2017

DTIC Science & Technology

2017-11-01

familiar with emerging new rules for safeguarding federal information . Better Communications on IT Spending Risks Robert D. Frum, DCS There are ways...to consider a broader range of possible outcomes when making information technology investments. special section IT cybersecurity ALSO 38 MDAP...Online­Subscription.pdf>. Privacy Act/Freedom of Information Act If you provide us your business address, you will be­ come part of mailing lists that are

China Report, Economic Affairs, Energy: Status and Development -- XXVI

DTIC Science & Technology

1984-04-09

better technology for open-cut mining; — renovating 9 railway trunk lines while building 8 new ones, bringing the total number in the area up to 20 and...CSO: 4013/119 91 SUPPLEMENTAL SOURCES CHINA’S SOLAR ENERGY RESOURCE DISTRIBUTION ANALYZED Beijing TAIYANGNENG XUEBAO [ACTA ENERGIAE SOLARIS...Calculation in Our Country, TAIYANGNENG XUEBAO [ACTA ENERGIAE SOLARIS SINICA], Vol 1, 1980 pp 1-9. 12553 CSO: 4013/19 102 CONSERVATION CONSERVATION

JPRS Report, Science & Technology, USSR: Earth Sciences

DTIC Science & Technology

1988-12-06

Vol 24 No 7, Jul 88] 14 Integral Characteristics of Light Scattering by Large Spherical Particles IE. P. Zege, A. A. Kokhanovskiy; IZVESTIYA AKADEMII...economical that the base not contain a grid model, but the initial contours, represented in vector format, in which case it is called a vector DRM. The...information make it possible to display both screen and vector DRM and from these, retrieve contours in the initial format. The automated forest mapping

JPRS Report, Science & Technology, USSR: Chemistry.

DTIC Science & Technology

1988-12-23

Escape Accidents at Nuclear Power Plant With Water Moderated Reactors [S. A. Kabakehi, M. A. Budayev, et al.; KHIMIYA VYSOKIKH ENERGIY, Vol 22 No 4...water on the reactor surface also lowered loss of radicals. In general, the extent and temperature function Study of Radicals Desorbing From Surface... reactor sur- Alcohols With Oxygen face, by adsorption of the reagents and reaction products 184100 13f Moscow KHIMICHESKA YA FIZIKA on this surface and the

Dual Mode Thin Film Bulk Acoustic Resonators (FBARs) Based on AlN, ZnO and GaN Films with Tilted c-Axis Orientation

DTIC Science & Technology

2010-01-01

TERMS MEMS , acoustic wave devices, acoustic wave sensors Qing-Ming Wang University of Pittsburgh 123 University Place University Club Pittsburgh, PA...resonators,” Proc. SPIE Vol. 6223, 62230I, Micro ( MEMS ) and Nanotechnologies for Space Applications; Thomas George, Zhong-Yang Cheng; Eds. (May...microelectromechanical resonators has been recognized as a technological challenge in the current microelectronics and MEMS development. The

JPRS Report, Science & Technology, USSR: Life Sciences.

DTIC Science & Technology

1987-06-23

Chestukhina, S.A. Tyurin, et al.; BIOKHIMIYA, No 6, Jun 86) 21 Some Properties of Urease Encapsulated in Liposomes CV.I. Zakrevskiy, N.G. Plekhanova...PROPERTIES OF UREASE ENCAPSULATED IN LIPOSOMES Kiev UKRAINSKIY BIOKHIMICHESKIY ZHURNAL in Russian Vol 58, No 4, Jul-Aug 86 (manuscript received 20 Jan 86) pp...plant urease incapsulated in liposomes—on the sub- strate hydrolysis kinetics—was investigated. The enzyme was selected by the ability of its urea

Metallurgical coatings and thin films; Proceedings of the International Conference, 18th, San Diego, CA, Apr. 22-26, 1991. Vols. 1 & 2

NASA Technical Reports Server (NTRS)

Mcguire, Gary E. (Editor); Mcintyre, Dale C. (Editor); Hofmann, Siegfried (Editor)

1991-01-01

A conference on metallurgical coatings and thin films produced papers in the areas of coatings for use at high temperatures; hard coatings and deposition technologies; diamonds and related materials; tribological coatings/surface modifications; thin films for microelectronics and high temperature superconductors; optical coatings, film characterization, magneto-optics, and guided waves; and methods for characterizing films and modified surfaces.

JPRS Report, Science & Technology, USSR: Space.

DTIC Science & Technology

1988-08-17

Half-life, years Specific Heat Release W/hr Plutonium-238 87.5 0.46 Curium-244 18.4 2.8 Curium-242 0.45 120 Polonium - 210 0.38 144 Polonium - 210 ...ASTRONOMICHESKIY ZHURNAL, Vol 14 No 3, Mar 88] 17 Relativistic Effects in Motion and Observations of Artificial Earth Satellites. I. Relativistic...Historical Survey of Biosatellites [V. B. Pishchik, ZEMLYA I VSELENNAYA, No 2, Mar-Apr 88] 35 Advances in Controlling Effects of Weightlessness on

JPRS Report - Science & Technology USSR: Life Sciences.

DTIC Science & Technology

1988-08-04

1, Jan-Fcb88]’ 7 PHARMACOLOGY, TOXICOLOGY Experimental Study of Pharmacokinetics of Bemithyl in Rats [S. S. Boyko, Yu. G. Bobkov, et al...Pharmacokinetics of Bemithyl in Rats 18400181b Moscow FARMAKOLOG1YA I TOKS1KOLOG1YA in Russian Vol 50 No 5, Sep-Oct 87 (manuscript received 25 Jun 85) pp 54...Abstract] Bemithyl (2-ethylmercaptobenzimidazole) is one of a group of drugs conventionally called actopro- tectors, which can increase

Initial Evaluation of the Intelligent Multi-UxV Planner with Adaptive Collaborative/Control Technologies (IMPACT)

DTIC Science & Technology

2017-02-17

Psychology. Brooke, J. (1996). SUS: a ‘quick and dirty ’ usability scale. In P. Jordan, B. Thomas, I. McClelland, & B. Weerdmeester (Eds.), Usability...level modeling, International Journal of Human Computer Studies, Vol. 45(3). Menzies, T. (1996b). On the Practicality of Abductive Validation, ECAI...1). Shima, T., & Rasmussen, S. (2009). UAV Cooperative Decision and Control: Challenges and Practical Approaches, SIAM Publications, ISBN

Investigation of Sorption Mass Transfer Models Using Synthetic Soils

DTIC Science & Technology

1996-12-01

Goltz for his useful comments regarding my review of the literature. His comments served to enhance the readability of my review as well as the...versions. Researchers ( Goltz , 1986; Wu and Gschwend, 1986; Ball and Roberts, 1991b; Young and Ball, 1995) have applied Fick’s second law of diffusion...Values," Environmental Science and Technology, Vol. 21, pp. 243-248, 1987. Goltz , M.N., Three-Dimensional Analytical Modeling of Diffusion-limited

Additional risk of end-of-the-pipe geoengineering technologies

NASA Astrophysics Data System (ADS)

Bohle, Martin

2014-05-01

Humans are engineers, even the artists who engineer the surface of the globe. Should humans endeavour to engineer the Earth to counter climate change hazards? Striving towards 'global sustainability' will require to adjust the current production and consumption patterns. Contrary to an approach of global sustainability, 'geoengineering' deploys a 'technology fix' for the same purpose. Humans are much inclined to look for technological fixes for problems because well engineered technological methods have created modern societies. Thus, it seems obvious to apply an engineering solution to climate change issues too. In particular, as air pollution causing acid rains has been reduced by cleaner combustion processes or ozone destructing chemical coolants have been replaced by other substances. Common to these approaches was to reduce inputs into global or regional systems by withholding emission, replacing substances or limiting use cases for certain substances. Thus, the selected approach was a technological fix or regulatory measure targeting the 'start of the pipe'. However applying a 'start of the pipe' approach to climate change faces the issue that mankind should reduce inputs were its hurts, namely reducing radically energy that is produced from burning fossil fuels. Capping burning of fossil fuels would be disruptive for the economic structures or the consumption pattern of the developed and developing industrialised societies. Facing that dilemma, affordable geoengineering looks tempting for some. However geoengineering technologies, which counter climate change by other means than carbon capture at combustion, are of a different nature than the technological fixes and negotiated regulatory actions, which so far have been applied to limit threats to regional and global systems. Most of the proposed technologies target other parts of the climate system but the carbon-dioxide input into the atmosphere. Therefore, many geoengineering technologies differ qualitatively from the known successes. They do not tackle the initial cause, namely the carbon-dioxide inputs that are too high. This is their additional specific risk. 'The acceptability of geoengineering will be determined as much by social, legal and political issues as by scientific and technical factors', conclude Adam Corner and Nick Pidgeon (2010) when reviewing social and ethical implications of geoengineering the climate. It is to debate in that context that most geoengineering technologies are 'end of the pipe technologies', what involves an additional specific risk. Should these technologies be part of the toolbox to tackle anthropogenic climate change? Adam Corner and Nick Pidgeon 2010, Geoengineering the climate: The social and ethical implications, Environment Vol. 52.

Localization Strategies in WSNs as applied to Landslide Monitoring (Invited)

NASA Astrophysics Data System (ADS)

Massa, A.; Robol, F.; Polo, A.; Giarola, E.; Viani, F.

2013-12-01

In the last years, heterogeneous integrated smart systems based on wireless sensor network (WSN) technology have been developed at the ELEDIA Research Center of the University of Trento [1]. One of the key features of WSNs as applied to distributed monitoring is that, while the capabilities of each single sensor node is limited, the implementation of cooperative schemes throughout the whole network enables the solution of even complex tasks, as the landslide monitoring. The capability of localizing targets respect to the position of the sensor nodes turns out to be fundamental in those application fields where relative movements arise. The main properties like the target typology, the movement characteristics, and the required localization resolution are different changing the reference scenario. However, the common key issue is still the localization of moving targets within the area covered by the sensor network. Many experiences were preparatory for the challenging activities in the field of landslide monitoring where the basic idea is mostly that of detecting slight soil movements. Among them, some examples of WSN-based systems experimentally applied to the localization of people [2] and wildlife [3] have been proposed. More recently, the WSN backbone as well as the investigated sensing technologies have been customized for monitoring superficial movements of the soil. The relative positions of wireless sensor nodes deployed where high probability of landslide exists is carefully monitored to forecast dangerous events. Multiple sensors like ultrasound, laser, high precision GPS, for the precise measurement of relative distances between the nodes of the network and the absolute positions respect to reference targets have been integrated in a prototype system. The millimeter accuracy in the position estimation enables the detection of small soil modifications and to infer the superficial evolution profile of the landslide. This information locally acquired also represent a fine tuning of large scale satellite acquisitions, usually adopted for remote sensing of landslides. The integration of dense and frequent WSN data within satellite image analysis will enhance the sensing capabilities leading to a multi-resolution and an highly space-time calibrated system. The WSN-based system has been preliminary tested in controlled environments in the ELEDIA laboratories and is now installed in a real test site where an active landslide is evolving. Preliminary data are here presented to assess the feasibility of the investigated solution in landslide monitoring and event forecasting. REFERENCES [1] M. Benedetti, L. Ioriatti, M. Martinelli, and F. Viani, 'Wireless sensor network: a pervasive technology for earth observation,' in IEEE Journal of Selected Topics in App. Earth Obs. And Remote Sens., vol. 3, no. 4, pp. 488-497, 2010. [2] F. Viani, M. Donelli, P. Rocca, G. Oliveri, D. Trinchero, and A. Massa, 'Localization, tracking and imaging of targets in wireless sensor networks,' Radio Science, vol. 46, no. 5, 2011. [3] F. Viani, F. Robol, M. Salucci, E. Giarola, S. De Vigili, M. Rocca, F. Boldrini, G. Benedetti, and A. Massa, 'WSN-based early alert system for preventing wildlife-vehicle collisions in Alps regions - From the laboratory test to the real-world implementation,' 7th European Conference on Antennas and Propagation 2013 (EUCAP2013), Gothenburg, Sweden, April 8-12, 2013.

Cooperative Knowledge Bases.

DTIC Science & Technology

1988-02-01

intellegent knowledge bases. The present state of our system for concurrent evaluation of a knowledge base of logic clauses using static allocation...de Kleer, J., An assumption-based TMS, Artificial Intelligence, Vol. 28, No. 2, 1986. [Doyle 79) Doyle, J. A truth maintenance system, Artificial

Surgery in World War II. Orthopedic Surgery in the Zone of Interior

DTIC Science & Technology

1970-01-01

General Reference and Research Branch ROSE C. ENGELMAN, Ph. D., Chief, Historians Branch GERALDINE B. SITES, Chief, Information Activities Branch Major...SERIES Internal Medicine in World War II: Vol. I. Activities of Medical Consultants Vol. II. Infectious Diseases Vol. III. Infectious Diseases and General...Arthropodborne Diseases Other Than Malaria Vol. IX. Special Fields Surgery in World War II: Activities of Surgical Consultants, vol. I Activities of Surgical

Real-Time Target Motion Animation for Missile Warning System Testing

DTIC Science & Technology

2006-04-01

T. Perkins, R. Sundberg, J. Cordell, Z. Tun , and M. Owen, Real-time Target Motion Animation for Missile Warning System Testing, Proc. SPIE Vol 6208...Z39-18 Real-time target motion animation for missile warning system testing Timothy Perkins*a, Robert Sundberga, John Cordellb, Zaw Tunb, Mark

The Emergence of Operational Art in the Great Sioux War 1876-1877

DTIC Science & Technology

2013-12-10

Schmitt (Norman: University of Oklahoma Press, 1946), 197. 58 Bourke , Vol. 1, 336-360. 25...feeling of hope, an atmosphere of futility and frustration set in when the column became too cumbersome to catch 78 Bourke , Vol. 1, 381. 79 “Letters...from the column and 81 Greene, Slim Buttes, 29. 82 Bourke , Vol. 2, 76; Gray, 219-220. See also Bourke , Vol. 2, 45. 83 Bourke , Vol. 2, 88-9

Joint Egypt/United States report on Egypt/United States cooperative energy assessment. Volume 1 of 5 Vols. Executive summary, main report and appendices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-04-01

The International Energy Assessment Program between Egypt and the U.S. was formulated from mid-March to mid-July, 1978. The assessment identified energy demand and supply options for Egypt that are consistent with its indigenous energy resources; assessed Egypt's ability to effectively use those options; and identified measures by which Egypt's energy-planning activities could be improved. The assessment addressed all known and potential energy supply options (oil, gas, coal, oil shale, hydroelectric, nuclear power, geothermal, solar, wind, and biomass). Using the Reference Energy System, two future energy supply/demand balances are constructed (for 1985 and the year 2000) and these are compared withmore » a historical (1975) supply/demand balance. The feasibility of each of the options is established in terms of the availability of the required resources and of the processing, conversion, transport, and utilization technology.« less

New Hope for an Oral Cancer Solution: Together We Can Make a Difference

PubMed Central

Rosin, Miriam P.; Poh, Catherine F.; Path, Cert Oral; Elwood, J. Mark; Williams, P. Michele; Med, Cert Oral; Gallagher, Richard; MacAulay, Calum; Lam, Wan W.; Auluck, Ajit; Zhang, Lewei; Path, Cert Oral; Hislop, T. Gregory

2008-01-01

Oral cancer is associated with high mortality and morbidity rates, largely as a result of late diagnosis. Although dental practitioners are trained to identify premalignant and malignant lesions, an organized system is needed to offer guidance and to improve access to experts in diagnosis and management of these lesions. In this article, we describe how the British Columbia Oral Cancer Prevention Program (BC OCPP) is addressing this challenge in several ways: by linking community dental practices and referral centres, by creating partnerships between scientists and clinicians that already have resulted in new technologies to enhance early diagnosis, by involving a broad range of stakeholders to ensure population-based screening and by engaging in provincial, national and international outreach. For citation purposes, the electronic version is the definitive version of this article: www.cda-adc.ca/jcda/vol-74/issue-3/XXX.html PMID:18387266

Thematic Conference on Geologic Remote Sensing, 8th, Denver, CO, Apr. 29-May 2, 1991, Proceedings. Vols. 1 & 2

NASA Technical Reports Server (NTRS)

1991-01-01

The proceedings contain papers discussing the state-of-the-art exploration, engineering, and environmental applications of geologic remote sensing, along with the research and development activities aimed at increasing the future capabilities of this technology. The following topics are addressed: spectral geology, U.S. and international hydrocarbon exporation, radar and thermal infrared remote sensing, engineering geology and hydrogeology, mineral exploration, remote sensing for marine and environmental applications, image processing and analysis, geobotanical remote sensing, and data integration and geographic information systems. Particular attention is given to spectral alteration mapping with imaging spectrometers, mapping the coastal plain of the Congo with airborne digital radar, applications of remote sensing techniques to the assessment of dam safety, remote sensing of ferric iron minerals as guides for gold exploration, principal component analysis for alteration mappping, and the application of remote sensing techniques for gold prospecting in the north Fujian province.

Chicago monostatic acoustic vortex sensing system : Vol. IV. wake vortex decay

DOT National Transportation Integrated Search

1982-07-01

A Monostatic Acoustic Vortex Sensing System (MAVSS) was installed at Chicago's O'Hare International Airport to measure the strength and decay of aircraft wake vortices from landing aircraft. The MAVSS consists of an array of acoustic antennas which m...

Ball Lightning in Zero Gravity in the Laboratory

NASA Astrophysics Data System (ADS)

Alexeff, Igor; Parameswaran, Sriram; Grace, Michael

2004-11-01

We have created balls of orange plasma in atmospheric - pressure air that survive for over 1/2 second without power input. The technique used was to create a pulsed horizontal electric arc in a zero - gravity environment using 6 neon - sign transformers in parallel, each producing 16,000 V at 60 mA. The zero - gravity environment reduces heat losses by reducing thermal convection, creating a larger ball. Previous work (1) suggests that the ball lifetime scales as the square of the ball radius. The balls were photographed after power turnoff with a high - speed 16 mm movie camera. Movies of the balls being formed and decaying will be shown. We suggest that there are several other forms of ball lightning (2). 1.Igor Alexeff et. al. International Conference On Plasma Science, Jeju, Korea, June 2-5, 2003, Conference Record, p 254. 2. Igor Alexeff and Mark Rader, IEEE Transactions on Plasma Science, Vol. 20, No. 6, Dec. 1992, pp.669-671. Igor Alexeff and Mark Rader, Fusion Technology, Vol. 27, May 1995, p. 271.

Microwave-induced cracking of pyrolytic tars coupled to microwave pyrolysis for syngas production.

PubMed

Beneroso, D; Bermúdez, J M; Montes-Morán, M A; Arenillas, A; Menéndez, J A

2016-10-01

Herein a new process is proposed to produce a syngas-rich gas fraction (>80vol% H2+CO) from biowaste based on microwave heating within two differentiated steps in order to avoid tars production. The first step consists of the microwave pyrolysis of biowaste induced by a char-based susceptor at 400-800°C; tars, char and syngas-rich gas fractions being produced. The tars are then fed into the second step where a portion of the char from the first step is used as a bed material in a 0.3:1wt% ratio. This bed is heated up by microwaves up to 800°C, allowing thermal cracking of tars and additional syngas (>90vol% H2+CO) being then produced. This new concept arises as an alternative technology to the gasification of biowastes for producing syngas with no need for catalysts or gasifying reagents to minimise tars production. Copyright © 2016 Elsevier Ltd. All rights reserved.

Protecting the Moon for research: ILEWG report

NASA Astrophysics Data System (ADS)

Foing, Bernard H.

We give a report on recommendations with emphasis on environment protection, and since last COSPAR from ILEWG International conferences Exploration and Utilisation of the Moon on held at Cape Canaveral in 2008 (ICEUM10), and in Beijing in May 2010 with IAF (GLUC -ICEUM11). We discuss the different rationale for Moon exploration, as debated at ILEWG. ILEWG Science task group has listed priorities for scientific investigations: clues on the formation and evolution of rocky planets, accretion and bombardment in the inner solar system, comparative planetology processes (tectonic, volcanic, impact cratering, volatile delivery), records astrobiology, survival of organics; past, present and future life; sciences from a biology lunar laboratory. We discuss how to preserve Moon research potential in these areas while operating with instruments, landers, rover during a cooperative robotic village, and during the transition form lunar human outpost to permanent sustainable human base. We discuss how Moon-Mars Exploration can inspire solutions to global Earth sustained development with the trade-off of In-Situ Utilisation of resources; Establishment of permanent robotic infrastructures, Environmental and planetary protection aspects and lessons for Mars; Life sciences laboratories, and support to human exploration. Co-authors: ILEWG Task Groups on Science, Technology and Human Lunar Bases ILEWG Reference documents: http://sci.esa.int/ilewg -10th ILEWG Conference on Exploration and Utilisation of the Moon, NASA Lunar Ex-ploration Analysis Group-PSace Resources Roundtable, Cape Canaveral October 2008, pro-gramme online at http://sci.esa.int/ilewg/ -9th ILEWG Conference on Exploration and Utilisation of the Moon, ICEUM9 Sorrento 2007, programme online at http://sci.esa.int/ilewg/ -8th ILEWG Conference on Exploration and Utilisation of the Moon, Beijing July 2006, programme online at http://sci.esa.int/ilewg/ -The Moon and Near Earth Objects (P. Ehrenfreund , B.H. Foing, A. Cellino Editors), Ad-vances in Space Research, Volume 37, Issue 1, pp 1-192, 2006 -7th ILEWG Conference on Exploration and Utilisation of the Moon, Toronto Sept 2005, Programme and Proceedings on line at www.ilewg.org, R. Richards et al Editors -6th ILEWG Conference on Exploration and Utilisation of the Moon, Udaipur Nov. 2004, Proceedings ( N. Bhandari Editor), Journal Earth System Science, India, 114, No6, Dec 2005, pp. 573-841 -5th ILEWG Conference on Exploration and Utilisation of the Moon, Hawaii Nov 2003, Pro-ceedings ILC2005/ICEUM5 (S.M. Durst et al Editors), Vol 108, 1-576 pp, Science and Tech-nology Series, American Astronautical Society, 2004 -'The next steps in exploring deep space -A cosmic study by the IAA', W. Huntress, D. Stetson, R. Farquhar, J. Zimmerman, B. Clark, W. O'Neil, R. Bourke and B. Foing, Acta Astronautica, Vol 58, Issues 6-7, March-April 2006, p302-377 -IAA/ESA workshop on "Next Steps in Exploring Deep Space", ESTEC 22-23 sept. 2003 (B.H. Foing W. Huntress, conveners) Lunar Exploration, Planetary and Space Science, Vol 50, issue 14-15, Dec 2002 (B.H. Foing al) -ESLAB36 symposium on "Earth-like Planets and Moons", 2002, ESA-SP514, pp. 1-356, (B.H.Foing B. Battrick, editors) -'Lunar Exploration 2000', (B.H. Foing, D. Heather, Editors), Adv. Space Research Vol 30, Nr 8, 2002 -'Earth-Moon Relationships', Proceedings of the Conference held in Padova, Italy at the Ac-cademia Galileiana di Scienze Lettere ed Arti, Nov. 2000, (C. Barbieri and F. Rampazzi, Editors), in Earth, Moon , Planets Vol. 85-86, Nos 1-3, pp 1-575, 2001 -4th International Conference on Exploration and Utilisation of the Moon, ESTEC, 2000, ESA SP-462 (B.H. Foing M. Perry, editors) -Investing in Space: The Challenge for Europe. Long-Term Space Policy Committee, Second Report, May 1999. ESA-SP-2000 -2nd International Lunar Workshop, held at Kyoto in October 1996, Proceedings, H. Mizutani, editor, Japan Space Forum Publisher, 1997 International Lunar Workshop, 1994 May 31-June 3, Beatenberg, Switzerland. Proceedings. Ed. Balsiger, H. et al. European Space Agency, 1994. ESA-SP-1170 -Astronomy and Space Science from the Moon', Proceedings of COSPAR/IAF session at World Congress, Washington, (B.H. Foing et al editors), Advances in Space Research, Volume 14, Issue 6, 1994 -Mission to the Moon, Europe's Priorities for Scientific Exploration and Utilisation of the Moon', R.M. Bonnet et al, European Space Agency, ESA SP-1150, June 1992

Micromachined ultrasound transducers with improved coupling factors from a CMOS compatible process

PubMed

Eccardt; Niederer

2000-03-01

For medical high frequency acoustic imaging purposes the reduction in size of a single transducer element for one-dimensional and even more for two-dimensional arrays is more and more limited by fabrication and cabling technology. In the fields of industrial distance measurement and simple object recognition low cost phased arrays are lacking. Both problems can be solved with micromachined ultrasound transducers (MUTs). A single transducer is made of a large number of microscopic elements. Because of the array structure of these transducers, groups of elements can be built up and used as a phased array. By integrating parts of the sensor electronics on chip, the cabling effort for arrays can be reduced markedly. In contrast to standard ultrasonic technology, which is based on massive thickness resonators, vibrating membranes are the radiating elements of the MUTs. New micromachining technologies have emerged, allowing a highly reproducible fabrication of electrostatically driven membranes with gap heights below 500 nm. A microelectronic BiCMOS process was extended for surface micromechanics (T. Scheiter et al., Proceedings 11th European Conference on Solid-State Transducers, Warsaw, Vol. 3, 1997, pp. 1595-1598). Additional process steps were included for the realization of the membranes which form sealed cavities with the underlying substrate. Membrane and substrate are the opposite electrodes of a capacitive transducer. The transducers can be integrated monolithically on one chip together with the driving, preamplifying and multiplexing circuitry, thus reducing parasitic capacities and noise level significantly. Owing to their low mass the transducers are very well matched to fluid loads, resulting in a very high bandwidth of 50-100% (C. Eccardt et al., Proceedings Ultrasonics Symposium, San Antonio, Vol. 2, 1996, pp. 959-962; P.C. Eccardt et al., Proceedings of the 1997 Ultrasonics Symposium, Toronto, Vol. 2, 1997, pp. 1609-1618). In the following it is shown how the BiCMOS process has been modified to meet the demands for ultrasound generation and reception. Bias and driving voltages have been reduced down to the 10 V range. The electromechanical coupling is now almost comparable with that for piezoelectric transducers. The measurements exhibit sound pressures and bandwidths that are at least comparable with those of conventional piezoelectric transducer arrays.

Realization of Combined Diagnosis/Treatment System By Ultrasound Strain Measurement-Based Shear Modulus Reconstruction/Imaging Technique Examples With Application on The New Type Interstitial RF Electromagnetic Wave Thermal Therapy

DTIC Science & Technology

2001-10-25

Righetti, J. Ophir, and J. Hazle, “The feasibility of elastographic visualization of HIFU -induced thermal lesions in soft tissues,” Ultrasound in Med...Review article: High intensity focused ultrasound -potential for cancer treatment,” Br. J. Radiol., vol. 68, pp. 1296-1303, 1995. [17] Watkin NA, G...R.. Ter Haar, S. B. Morris, C. R. J. Woodhouse, “The urological applications of focused ultrasound surgery,” Br. J. Urol., vol. 75 (suppl. 1), pp

Crystal-rich lava dome extrusion during vesiculation: An experimental study

NASA Astrophysics Data System (ADS)

Pistone, Mattia; Whittington, Alan G.; Andrews, Benjamin J.; Cottrell, Elizabeth

2017-11-01

Lava dome-forming eruptions represent a common eruptive style and a major hazard at numerous active volcanoes worldwide. The extrusion mechanics of crystal-rich lava domes and the influence of volatiles on the transition from viscous to brittle behaviour during lava dome extrusion remain unclear. Understanding how gas exsolution and crystallinity control effusive versus explosive eruption behaviour is essential. Here, we present new experimental results on the rheology of synthesised, crystal-rich (50 to 80 vol% quartz crystals), hydrous (4.2 wt% H2O in the glass) dacite samples, which vesiculate from 5 to 27 vol% gas bubbles at high temperatures (from glass transition temperature to 797 °C) during deformation conducted in a parallel plate viscometer (constant stress at 0.63-0.64 MPa, and variable strain-rates ranging from 8.32·10- 8 to 3.58·10- 5 s- 1). The experiments reproduce certain aspects of lava dome deformation in volcanic conduits during vesiculation of the residual melt, instigated in the experiments by increasing temperature. During gas exsolution (i.e. nucleation and growth of gas-pressurised bubbles) and volume inflation, we find that the rheological lubrication of the system during deformation is strongly dictated by the initial crystallinity. At crystal contents < 60 vol%, gas bubbles form and coalesce during expansion and viscous deformation, favouring strain localisation and gas permeability within shear bands, which control the overall sample rheology. At crystallinities of 60 to 70 vol%, gas exsolution generates pressurisation (i.e. pore pressure increase) within the bubbles trapped in the solid crystal clusters, and embryonic formation of microscopic fractures through melt and crystals drives the system to a brittle behaviour. At higher crystallinity (80 vol%) vesiculation leads to large pressurisation, which then triggers extensive brittle fragmentation. Through macroscopic fractures, outgassing determines the rheological stalling of the system. In the light of these results we propose a rheological description of crystal-rich lava dome mechanics. The contrasting experimental behaviours at different crystallinities have implications for the style of slow-ascending dome-forming eruptions. All other factors being equal, our experiments suggest that crystal-poor magmas will undergo efficient outgassing, reducing the potential for an explosive eruption. Conversely, crystal-rich magmas may experience limited outgassing and larger gas overpressures during vesiculation, therefore increasing the potential for an explosive eruption.

Terahertz spectroscopy and imaging for cultural heritage management: state of art and perspectives

NASA Astrophysics Data System (ADS)

Catapano, Ilaria; Soldovieri, Francesco

2014-05-01

Non-invasive diagnostic tools able to provide information on the materials and preservation state of artworks are crucial to help conservators, archaeologists and anthropologists to plan and carry out their tasks properly. In this frame, technological solutions exploiting Terahertz (THz) radiation, i.e., working at frequencies ranging from 0.1 to 10 THz, are currently deserving huge attention as complementary techniques to classical analysis methodologies based on electromagnetic radiations from X-rays to mid infrared [1]. The main advantage offered by THz spectroscopy and imaging systems is referred to their capability of providing information useful to determine the construction modality, the history life and the conservation state of artworks as well as to identify previous restoration actions [1,2]. In particular, unlike mid- and near-infrared spectroscopy, which provides fingerprint absorption spectra depending on the intramolecular behavior, THz spectroscopy is related to the structure of the molecules of the investigated object. Hence, it can discriminate, for instance, the different materials mixed in a paint [1,2]. Moreover, THz radiation is able to penetrate several materials which are opaque to both visible and infrared materials, such as varnish, paint, plaster, paper, wood, plastic, and so on. Accordingly, it is useful to detect hidden objects and characterize the inner structure of the artwork under test even in the direction of the depth, while avoiding core drillings. In this frame, THz systems allow us to discriminate different layers of materials present in artworks like paints, to obtain images providing information on the construction technique as well as to discover risk factors affecting the preservation state, such as non-visible cracks, hidden molds and air gaps between the paint layer and underlying structure. Furthermore, adopting a no-ionizing radiation, THz systems offer the not trivial benefit of negligible long term risks to the molecular stability of the exposed objects and humans. Recently, the interest on THz technology is also growing up thanks to the development of flexible and compact commercial systems having source and detector probes coupled by means of optical fiber cables and that do not require complex optical alignments. These features allow us to reconfigure the measurement configuration easily; thus transmission, normal reflection and oblique reflection data can be collected according to the constrains and objective of the survey to be performed. Moreover, they open the way to on field applications. An example of last generation THz systems is the Fiber-Coupled Terahertz Time Domain System (FICO) marketed by Z-Omega and available at the Institute of Electromagnetic Sensing of the Environment. Such a system is designed to perform both transmission and reflection spectroscopy and imaging measurements in the range from 60GHz to 3THz; with a waveform acquisition speed up to 500Hz. A review of the literature assessing potentialities and open challenges of THz spectroscopy and imaging in the frame of cultural heritage preservation will be provided at the conferences, with a specific focus on the diagnostic capabilities of last generation systems. REFERENCES [1] K. Fukunaga, I. Hosako, Innovative non-invasive analysis techniques for cultural heritage using terahertz technology, C. R. Physique, vol. 11, pp.519-526, 2010. [2] G.Fillippidis, M. Massaouti, A. Selimis, E.J. Gualda, J.M. Manceau, S. Tzortzakis, Nonlinear imaging and THz diagnostic tools in the service of Cultural Heritage, Appl. Phys. A, vol.106, pp.257-263, 2012.

Electrical conductivity of partially-molten olivine aggregate and melt interconnectivity in the oceanic upper mantle

NASA Astrophysics Data System (ADS)

Laumonier, Mickael; Frost, Dan; Farla, Robert; Katsura, Tomoo; Marquardt, Katharina

2016-04-01

A consistent explanation for mantle geophysical anomalies such as the Lithosphere-Astenosphere Boundary (LAB) relies on the existence of little amount of melt trapped in the solid peridotite. Mathematical models have been used to assess the melt fraction possibly lying at mantle depths, but they have not been experimentally checked at low melt fraction (< 2 vol. %). To fill this gap, we performed in situ electrical conductivity (EC) measurement on a partially-molten olivine aggregate (Fo92-olivine from a natural peridotite of Lanzarote, Canary Islands, Spain) containing various amount of basaltic (MORB-like composition) melt (0 to 100%) at upper mantle conditions. We used the MAVO 6-ram press (BGI) combined with a Solartron gain phase analyser to acquire the electrical resistance of the sample at pressure of 1.5 GPa and temperature up to 1400°C. The results show the increase of the electrical conductivity with the temperature following an Arrhenius law, and with the melt fraction, but the effect of pressure between 1.5 and 3.0 GPa was found negligible at a melt fraction of 0.5 vol.%. The conductivity of a partially molten aggregate fits the modified Archie's law from 0.5 to 100 vol.%. At melt fractions of 0.25, 0.15 and 0.0 vol.%, the EC value deviates from the trend previously defined, suggesting that the melt is no longer fully interconnected through the sample, also supported by chemical mapping. Our results extend the previous results obtained on mixed system between 1 and 10% of melt. Since the melt appears fully interconnected down to very low melt fraction (0.5 vol.%), we conclude that (i) only 0.5 to 1 vol.% of melt is enough to explain the LAB EC anomaly, lower than previously determined; and (ii) deformation is not mandatory to enhance electrical conductivity of melt-bearing mantle rocks.

Experimental studies on equilibrium adsorption isosteres and determination of the thermodynamic quantities of polar media on alumina Al2O3

NASA Astrophysics Data System (ADS)

Yonova, Albena

2017-03-01

The present work is a revieif of theoretical and experimental study on the adsorption performance of the adsorbent Alumina (Al2O3) used in the adsorption system. An experimental investigation on the equilibrium adsorption isosteres at low pressure (< 1 atm) of working pairs Al2O3/H2O and Al2O3/C2H6O2 is carried out. The isovolume measurement method is adopted in the test setup to directly measure the saturated vapor pressures of working pairs at vapor-liquid equilibrium (dG=0 and dμi=0). Quantity adsorbed is determined from pressure, volume and temperature using gas law. The isosteric heat of adsorption is calculated from the slope of the plot of lnP versus 1/T different amounts of adsorbate onto adsorbent as follows: 0,01 vol% Al2O3/H2O; 0,03 vol% Al2O3/H2O; 0,1 vol% Al2O3/H2O; 0,01 vol% Al2O3/C2H6O2; 0,03 vol% Al2O3/C2H6O2; 0,1 vol% Al2O3/C2H6O2. This study shows that adsorption working pair Al2O3 C2H6O2 has better adsorption performances than those of the A2O3/H2O. Surface acidity! is a most important property! far both adsorption and catalysis and therefore is examined structure of active sites of alumina surface. Thermodynamic parameters such as isosteric heat of adsorption, isosteric enthalpy and entropy of adsorption are critical design variables in estimating the performance and predicting the mechanism of an adsorption process and are also one of the basic requirements for the characterization and optimization of an adsorption process

Extraction of cesium, strontium and the platinium group metals from acidic high activity nuclear waste using a Purex process compatible organic extractant. Final report, December 15, 1980-August 15, 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, M.W. Jr.; Van Brunt, V.

1984-09-14

Purex process compatible organic systems which selectively and reversibly extract cesium, strontium, and palladium from synthetic mixed fission product solutions containing 3M HNO/sub 3/ have been developed. This advance makes the development of continuous solvent extraction processes for their recovery more likely. The most favorable cesium and strontium complexing solutions have been tested for radiation stability to 10/sup 7/ rad using a 0.4 x 10/sup 7/ rad/h /sup 60/Co source. The distribution coefficients dropped somewhat but remained above unity. For cesium the complexing organic solution is 5 vol % (0.1M) NNS, 27 vol % TBP and 68 vol % kerosenemore » containing 0.05m Bis 4,4',(5')(1-hydroxy 2-ethylhexyl)-benzo 18-crown-6 (Crown XVII). The NNS is a sulfonic acid cation exchanger. With an aqueous phase containing 0.006M Cs/sup +1/ in contact with an equal volume of extractant the D org/aq = 1.6 at a temperature of 25 to 35/sup 0/C. For strontium the complexing organic solution is 5 vol % (0.1M) NNS, 27 vol % TBP and 68 vol % Kerosene containing 0.02M Bis 4,4'(5') (1-hydroxyheptyl)cyclohexo 18-crown-6 (Crown XVI). With an aqueous phase containing 0.003M Sr/sup +2/ in contact with an equal volume of extractant the D org/aq = 1.98 at a temperature of 25 to 35/sup 0/C. For palladium the complexing organic solution consisted of a ratio of TBP/kerosene of 0.667 containing 0.3M Alamine 336 which is a tertiary amine anion exchanger. With an aqueous phase containing 0.0045M Pd/sup +/ in contact with an equal volume of extractant the D org/aq = 1.95 at a temperature of 25 to 35/sup 0/C.« less

Flying Qualities Flight Testing of Digital Flight Control Systems. Flight Test Techniques Series - Volume 21 (les Essais en vol des performances des systemes de ommande de vol numeriques)

DTIC Science & Technology

2001-12-01

product operator, Ucg = X body axis velocity at the cg, Uvane = X body axis velocity at the cg, Vcg = Y body axis velocity at the cg, Vvane = Y body axis...Tan vane Uvane α β   =       =     (5) Ucg = VtrueCOS(βtrue)COS(αtrue) Vcg = VtrueSIN(βtrue) Wcg = VtrueCOS(βtrue)SIN...from the definitions of these angles. 2 2 2 1 1 V U V Wcg cg cgtrue Wcg Tantrue Ucg Vcg Sintrue Vtrue α β = + +  −=      −=     (12) 53

Making Better Use of Bandwidth: Data Compression and Network Management Technologies

DTIC Science & Technology

2005-01-01

data , the compression would not be a success. A key feature of the Lempel - Ziv family of algorithms is that the...citeseer.nj.nec.com/yu02motion.html. Ziv , J., and A. Lempel , “A Universal Algorithm for Sequential Data Compression ,” IEEE Transac- tions on Information Theory, Vol. 23, 1977, pp. 337–342. ...probability models – Lempel - Ziv – Prediction by partial matching The central component of a lossless compression algorithm

JPRS Report, Science & Technology, USSR: Space Biology & Aerospace Medicine, Vol. 21, No. 3, May-June 1987

DTIC Science & Technology

1988-01-12

suffi- cient signal power (no more than 50 mW) [8, 18, 19, 35, 39]. Use of electric stimulation at subliminal levels of above current has a tonic...in the case of a manganese-deficient diet [57]. Retarded growth and sexual maturation, diminished concentration of zinc in plasma, red blood cells...metalloenzymes, stimulating effect on blood-forming organs, hemopoiesis and other functions. Our chronic experiments on animals and observations of

Preliminary Development of a Computational Model of a Dielectric Barrier Discharge

DTIC Science & Technology

2004-12-01

Gerhard Pietsch . "Microdischarges in Air-Fed Ozonizers," Journal of Physics D: Applied Physics, Vol 24, 1991, pp 564-572. 14 Baldur Eliasson. "Modeling...Gibalov and Gerhard Pietsch . "Two-dimensional Modeling of the Dielectric Barrier Discharge in Air," Plasma Sources Science Technology, 1 (1992), pp. 166...Computer Modeling," IEEE Transactions on Plasma Science, 27 (1), February 1999, pp 36-37. 19 Valentin I Gibalov and Gerhard J. Pietsch . "The

Atomic Layer Deposition Enabled Interconnect Technology for Vertical Nanowire Arrays

DTIC Science & Technology

2009-06-01

Diodes”, Nano Lett., Vol. 5, No. 11, 2005. [5] Hwa-Mok Kim, Tae Won Kang and Kwan Soo Chung,“Nanoscale Ultraviolet-Light- Emitting Diodes Using Wide...Bandgap Gallium Nitride Nanorods”, Adv. Materi. 2003, 15, No. 7-8. [6] Candace K. Chan, Hailin Peng, Gao Liu, Kevin McIlwrath, Xiao Feng Zhang...Coatings”Adv. Mater. (Weinheim, Ger.) 19, 1801 2007. [13] Candace K. Chan, Hailin Peng, Gao Liu, Kevin McIlwrath, Xiao Feng Zhang, Robert A. Huggins

Magnetic Soliton, Homotopy and Higgs Theory,

DTIC Science & Technology

1986-04-24

OD-AL67 366 NAGETIC SOLITON ONOTOPY ND HIGGS THEORY(U) FOREIGNI n1/ 1TECHNOLOGY D V NRIGHT-PATTERSON AFD ON Y LI ET AL. UNCLSSIIED24 APR 86 FTD-ID...MAGNETIC SOLITON, HOMOTOPY AND HIGGS THEORY by Li Yuanjie and Lei Shizu *. . * . .%..**% . . .-..C./ ~~~Approved for public release; -," Distribution...HOMOTOPY AND HIGGS THEORY By: Li Yuanjie and Lei Shizu English pages: 9 Source: Huazhong Gongxueyuan Xuebao, Vol. 11, Nr. 6, 1983, pp. 65-70 Country of

Development of Fracture Mechanics Maps for Composite Materials. Volume 1.

DTIC Science & Technology

1985-12-01

A________________________ N 4. PERFORMING ORGANIZATION REPORT NUMBER (S) 5. MONITORING ORGANIZATION REPORT NUMBER (S) None AFWAL-TR-85-4150, Vol 1 6. NAME OF ... OF FUNDING/SPONSORING Sb. OFFICE SYMBOL 9. PROCUREMENT INSTRUMENT IDENTIFICATION NUMBER ORGANIZATION if appplicable) European Space Technology Comm...ttee N/A ESTEC/ Contract No 4825/81/ML/AK(SC) B:. ADDRESS (City. State a=d ZIP Codel 10. SOURCE OF FUNDING NOS. ROG RAM’ PR OJE CT TASK WORK UNIT

Advanced Concepts: Enabling Future AF Missions Through the Discovery and Demonstration of Emerging Revolutionary Technologies

DTIC Science & Technology

2012-10-03

µmeteoroids, weather, vibrations... Asteroid Mining Breakthrough Physics No known feasible concepts. --- Concept NTF NMS NCA Primary Challenges for Launch...weather, vibrations... Asteroid Mining Breakthrough Physics No known feasible concepts. --- 8 2.2 Microwave Augmentation of Solid Rocket Motors16,17 As...Astronautica, Vol. 52, 1, pp. 49-75, 30 May, 2002. 7. Sonter, M.J., “The Technical and Economic Feasibility of Mining the Near-Earth Asteroids ,” Acta

An Analysis of the President’s Budgetary Proposals for Fiscal Year 2005

DTIC Science & Technology

2004-03-01

productivity —which represents the state of technological know-how. The model is not forward-looking—people base their decisions entirely on...Bottles: A Meta-Analysis of Ricardian Equivalence,” Southern Economic Journal, vol. 64, no. 3 (January 1998), pp. 713-727. APPENDIX B THE MODELS ...Under the President’s Budget and UnderCBO’s Baseline Policy Assumptions 25How Fiscal Policy Affects the Economy 28 A Description of CBO’s Models and

Analysis of the Performance of Mixed Finite Element Methods

DTIC Science & Technology

1988-11-28

with constant h is used and p is increased for accuracy. The h-p version combines the two approaches. We have studied varioius theoretical and...program PROBE IA101, developed by Noetic Tech, St. Louis [with a first release in 1985 and a second one in 19861. This program implements these versions...Vol. 606, Springer-Verlag, Berlin, 1977. A 10. B. A. Szabo, PROBE: Theoretical Manual, NOETIC Technologies, St. Louis, 1985. 4. Chronological list of

Sharing the Dragon’s Teeth: Terrorist Groups and the Exchange of New Technologies

DTIC Science & Technology

2007-01-01

City: New Day Publishers, 1992; Syed Islam, “The Islamic Independence Movement in Pattani of Thailand and Mindanao of the Philippines,” Asian Survey ...Mecca for Transnational Terrorism in Southeast Asia 39 C4 compounds that were hidden in toothpaste tubes, deodorant cans, shampoo bottles, and...Mediterranean Politics, Vol. 3, No. 1, Summer 1998, p. 106. 14 Peter Hirshberg, “Getting Smart,” Jerusalem Post, December 17, 1992. 15 “Special Survey

New Tools for Hybrid Systems

DTIC Science & Technology

2007-05-02

stability of a class of discrete event systems ", IEEE Transactions on Automatic Control , vol. 39, no. 2... stability , input/output stability , external stability and incremental input/output stability , as they apply to deterministic finite state machine systems ... class of systems , incremental 1/0 stability and external stability are equivalent notions, stronger than the notion of I/O stability . 15. SUBJECT

COED Transactions, Vol. X, No. 11, November 1978. A Microprocesser-Based Interactive Learning System.

ERIC Educational Resources Information Center

Mitchell, Eugene E., Ed.

A Microcomputer-Implemented Design Aid and Simulator (MIDAS) has been developed and used as an interactive learning system by electrical engineering students at the freshman and sophomore level. Evaluation of the system indicates that a great potential exists in the area of dedicated, inexpensive, interactive learning systems. User acceptance has…

Human Health Exposure Assessment for Rocky Mountain Arsenal. Volume 8. Response to Comments on the Draft Exposure Assessment Version 4.1

DTIC Science & Technology

1990-09-01

ASSESSMENT (INCLUDES ARMY AND SHELL TOXICITY PROFILES). VOL. 41V - PPLV METHODOLOGY. VOL. V - PPLV CALCULATIONS. VOL. VI - STUDY AREA EXPOSURE ANALYSIS (A...INTRODUCTION, B WESTERN STUDY AREA, C SOUTHERN STUDY AREA, D NORTHERN CENTRAL STUDY AREA, E CENTRAL STUDY AREA, F EASTERN STUDY AREA, G SOUTH PLANTS... STUDY AREA, AND H NORTH PLANTS STUDY AREA. VOL. VII - SUMMARY EXPOSURE ASSESSMENT. VOL. VIII - 14. SUBJECT TERMS 15. NUMBER OF PAGES PPLV, LAND USE

Flight-vehicle materials, structures, and dynamics - Assessment and future directions. Vol. 4 - Tribological materials and NDE

NASA Technical Reports Server (NTRS)

Fusaro, Robert L. (Editor); Achenbach, J. D. (Editor)

1993-01-01

The present volume on tribological materials and NDE discusses liquid lubricants for advanced aircraft engines, a liquid lubricant for space applications, solid lubricants for aeronautics, and thin solid-lubricant films in space. Attention is given to the science and technology of NDE, tools for an NDE engineering base, experimental techniques in ultrasonics for NDE and material characterization, and laser ultrasonics. Topics addressed include thermal methods of NDE and quality control, digital radiography in the aerospace industry, materials characterization by ultrasonic methods, and NDE of ceramics and ceramic composites. Also discussed are smart materials and structures, intelligent processing of materials, implementation of NDE technology on flight structures, and solid-state weld evaluation.

Information management system study results. Volume 2: IMS study results appendixes

NASA Technical Reports Server (NTRS)

1971-01-01

Computer systems program specifications are presented for the modular space station information management system. These are the computer program contract end item, data bus system, data bus breadboard, and display interface adapter specifications. The performance, design, tests, and qualification requirements are established for the implementation of the information management system. For Vol. 1, see N72-19972.

Occasional Addresses by Edward Teller at Conferences of Laser Interaction and Related Plasma Phenomena (LIRPP)

NASA Astrophysics Data System (ADS)

Hora, Heinrich; Miley, George H.

2016-10-01

The following sections are included: * Futurology of High Intensity Lasers (LIRPP Vol. 3A) * Lecture in Connection with the Edward Teller Medal Award (LIRPP Vol. 10) * Photo of the First Recipients of the Edward Teller Medal in 1991 * Photos from the Edward Teller Medal Celebration in 1997 * Photo with Participants of the LIRPP No. 12 Conference, 1995 * Photo with Edward Teller Medalists at IFSA01, Kyoto, 2001 * Keynote Address: The Edward Teller Lecture (LIRPP Vol. 11) * Keynote Address: Dr. Edward Teller (LIRPP Vol. 12) * Teller Award Presentation and Keynote Address (LIRPP Vol. 13) * Laudations of Awardees 1991-1995 (LIRPP Vol. 13) * Laudations of Awardees 1999-2003

Alternative Grading Systems. The Practitioner, Vol. III, No. 3.

ERIC Educational Resources Information Center

De Leonibus, Nancy; Thomson, Scott

After examining some of the pros and cons of traditional grading, the demands colleges make on grading practices, and the responses of people interested in grading, a number of examples of operating alternative systems are given. The alternatives include a dual (pass/withdraw grading in some courses, traditional grading in others) system, a…

Coed Transactions, Vol. XI, No. 1, January 1979. Microprocessor Course Development Equipment Selection.

ERIC Educational Resources Information Center

Mitchell, Eugene E., Ed.; Leventhal, Lance A.

Many devices and systems related to microprocessors are available on the marketplace. The author suggests that criteria for selecting and designing workstations and development systems are necessary. Seventeen important factors of designing workstations and six desirable features of a development system are presented. The kinds of places in which…

40 CFR 80.65 - General requirements for refiners and importers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... % Olefins content 2.5 vol % Benzene content 0.21 vol % Ethanol content 0.4 vol % Methanol content 0.2 vol... the property at one additional independent laboratory. If this second independent laboratory obtains a... representative sample from a batch of reformulated gasoline, to: (A) Obtain the refiner's or importer's assigned...

40 CFR 80.65 - General requirements for refiners and importers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... % Olefins content 2.5 vol % Benzene content 0.21 vol % Ethanol content 0.4 vol % Methanol content 0.2 vol... the property at one additional independent laboratory. If this second independent laboratory obtains a... representative sample from a batch of reformulated gasoline, to: (A) Obtain the refiner's or importer's assigned...

Local Muscle Metabolic Demand Induced by Neuromuscular Electrical Stimulation and Voluntary Contractions at Different Force Levels: A NIRS Study.

PubMed

Muthalib, Makii; Kerr, Graham; Nosaka, Kazunori; Perrey, Stephane

2016-06-13

Functional Muscle metabolic demand during contractions evoked by neuromuscular electrical stimulation (NMES) has been consistently documented to be greater than voluntary contractions (VOL) at the same force level (10-50% maximal voluntary contraction-MVC). However, we have shown using a near-infrared spectroscopy (NIRS) technique that local muscle metabolic demand is similar between NMES and VOL performed at MVC levels, thus controversy exists. This study therefore compared biceps brachii muscle metabolic demand (tissue oxygenation index-TOI and total hemoglobin volume-tHb) during a 10s isometric contraction of the elbow flexors between NMES (stimulation frequency of 30Hz and current level to evoke 30% MVC) and VOL at 30% MVC (VOL-30%MVC) and MVC (VOL-MVC) level in 8 healthy men (23-33-y). Greater changes in TOI and tHb induced by NMES than VOL-30%MVC confirm previous studies of a greater local metabolic demand for NMES than VOL at the same force level. The same TOI and tHb changes for NMES and VOL-MVC suggest that local muscle metabolic demand and intramuscular pressure were similar between conditions. In conclusion, these findings indicate that NMES induce a similar local muscle metabolic demand as that of maximal VOL.

Local Muscle Metabolic Demand Induced by Neuromuscular Electrical Stimulation and Voluntary Contractions at Different Force Levels: A NIRS Study

PubMed Central

Muthalib, Makii; Kerr, Graham; Nosaka, Kazunori; Perrey, Stephane

2016-01-01

Functional Muscle metabolic demand during contractions evoked by neuromuscular electrical stimulation (NMES) has been consistently documented to be greater than voluntary contractions (VOL) at the same force level (10-50% maximal voluntary contraction-MVC). However, we have shown using a near-infrared spectroscopy (NIRS) technique that local muscle metabolic demand is similar between NMES and VOL performed at MVC levels, thus controversy exists. This study therefore compared biceps brachii muscle metabolic demand (tissue oxygenation index-TOI and total hemoglobin volume-tHb) during a 10s isometric contraction of the elbow flexors between NMES (stimulation frequency of 30Hz and current level to evoke 30% MVC) and VOL at 30% MVC (VOL-30%MVC) and MVC (VOL-MVC) level in 8 healthy men (23-33-y). Greater changes in TOI and tHb induced by NMES than VOL-30%MVC confirm previous studies of a greater local metabolic demand for NMES than VOL at the same force level. The same TOI and tHb changes for NMES and VOL-MVC suggest that local muscle metabolic demand and intramuscular pressure were similar between conditions. In conclusion, these findings indicate that NMES induce a similar local muscle metabolic demand as that of maximal VOL. PMID:27478574

Energy from Waste--clean, efficient, renewable: transitions in combustion efficiency and NOx control.

PubMed

Waldner, M H; Halter, R; Sigg, A; Brosch, B; Gehrmann, H J; Keunecke, M

2013-02-01

Traditionally EfW (Energy from Waste) plants apply a reciprocating grate to combust waste fuel. An integrated steam generator recovers the heat of combustion and converts it to steam for use in a steam turbine/generator set. This is followed by an array of flue gas cleaning technologies to meet regulatory limitations. Modern combustion applies a two-step method using primary air to fuel the combustion process on the grate. This generates a complex mixture of pyrolysis gases, combustion gases and unused combustion air. The post-combustion step in the first pass of the boiler above the grate is intended to "clean up" this mixture by oxidizing unburned gases with secondary air. This paper describes modifications to the combustion process to minimize exhaust gas volumes and the generation of noxious gases and thus improving the overall thermal efficiency of the EfW plant. The resulting process can be coupled with an innovative SNCR (Selective Non-Catalytic Reduction) technology to form a clean and efficient solid waste combustion system. Measurements immediately above the grate show that gas compositions along the grate vary from 10% CO, 5% H(2) and 0% O(2) to essentially unused "pure" air, in good agreement with results from a mathematical model. Introducing these diverse gas compositions to the post combustion process will overwhelm its ability to process all these gas fractions in an optimal manner. Inserting an intermediate step aimed at homogenizing the mixture above the grate has shown to significantly improve the quality of combustion, allowing for optimized process parameters. These measures also resulted in reduced formation of NO(x) (nitrogenous oxides) due to a lower oxygen level at which the combustion process was run (2.6 vol% O(2,)(wet) instead of 6.0 vol% O(2,)(wet)). This reduction establishes optimal conditions for the DyNOR™ (Dynamic NO(x) Reduction) NO(x) reduction process. This innovative SNCR technology is adapted to situations typically encountered in solid fuel combustion. DyNOR™ measures temperature in small furnace segments and delivers the reducing reagent to the exact location where it is most effective. The DyNOR™ distributor reacts precisely and dynamically to rapid changes in combustion conditions, resulting in very low NO(x) emissions from the stack. Copyright © 2012 Elsevier Ltd. All rights reserved.

Different effects of propofol and isoflurane on cochlear blood flow and hearing function in Guinea pigs.

PubMed

Xiao, Ying; Wen, Jian; Bai, Yanxia; Duan, Na; Jing, G X

2014-01-01

To investigate the effects of isoflurane and propofol on mean arterial pressure (MAP), cochlear blood flow (CoBF), distortion-product otoacoustic emission (DPOAE), and the ultrastructure of outer hair cells (OHCs) in guinea pig cochleae. Forty-eight male guinea pigs were randomly assigned to one of six treatment groups. Groups 1 to 3 were infused (i.v.) with a loading dose of propofol (5 mg/kg) for 5 min and three maintenance doses (10, 20, or 40 mg kg-1·h-1, respectively) for 115 min. Groups 4 to 6 were inhaled with isoflurane at concentrations of 1.15 vol%, 2.30 vol% or 3.45 vol% respectively for 120 min. CoBF and MAP were recorded prior to and at 5 min intervals during drug administration. DPOAE was measured before, immediately after, and 1 h after administration. Following the final DPOAE test, cochleae were examined using scanning electron microscopy. Propofol treatment reduced MAP in a dose-dependent manner. CoBF and DPOAE showed increases at propofol maintenance doses of 10 and 20 mg kg-1·h-1. Inhalation of isoflurane at concentrations of 2.30 vol% and 3.45 vol% reduced MAP and CoBF. DPOAE amplitude increased following inhalation of 1.15 vol% isoflurane, but decreased following inhalations of 2.30 vol% and 3.45 vol%. Cochlear structure was changed following inhalation of either 2.30 vol% or 3.45 vol% isoflurane. Propofol could decrease MAP and increase both CoBF and DPOAE without affecting OHC structure. Inhalation of isoflurane at concentrations >2.30 vol% decreased CoBF and DPOAE, and produced injury to OHCs.

Methodes de calcul des forces aerodynamiques pour les etudes des interactions aeroservoelastiques

NASA Astrophysics Data System (ADS)

Biskri, Djallel Eddine

L'aeroservoelasticite est un domaine ou interagissent la structure flexible d'un avion, l'aerodynamique et la commande de vol. De son cote, la commande du vol considere l'avion comme une structure rigide et etudie l'influence du systeme de commande sur la dynamique de vol. Dans cette these, nous avons code trois nouvelles methodes d'approximation de forces aerodynamiques: Moindres carres corriges, Etat minimal corrige et Etats combines. Dans les deux premieres methodes, les erreurs d'approximation entre les forces aerodynamiques approximees par les methodes classiques et celles obtenues par les nouvelles methodes ont les memes formes analytiques que celles des forces aerodynamiques calculees par LS ou MS. Quant a la troisieme methode, celle-ci combine les formulations des forces approximees avec les methodes standards LS et MS. Les vitesses et frequences de battement et les temps d'executions calcules par les nouvelles methodes versus ceux calcules par les methodes classiques ont ete analyses.

Distributed Decision Making Environment.

DTIC Science & Technology

1982-12-01

Findeisen , F. N. Bailey, M. Brdys, K. Malinowski, P. Tatjewoki and A. Wozniak, Control and Coordination in Hierarchical Systems, New York, NY: Wiley...1977. [99] W. Findeisen et al., "On-line hierarchical control for steady-state systems," IEEE Trans. Automat. Conts., vol. AC-23, no. 2, pp. 189-209

Chicago Monostatic Acoustic Vortex Sensing System : Vol. II. Decay of B-707 and DC-8 Vortices.

DOT National Transportation Integrated Search

1981-09-01

A Monostatic Acoustic Vortex Sensing System (MAVSS) was installed at Chicago's O'Hare International Airport to measure the strength and decay of aircraft wake vortices from landing aircraft. The MAVSS consists of an array of acoustic antennas which m...

Precast concrete elements for accelerated bridge construction : laboratory testing of precast substructure components, Boone County bridge.

DOT National Transportation Integrated Search

2009-01-01

Vol. 1-1: In July 2006, construction began on an accelerated bridge project in Boone County, Iowa that was composed of precast substructure : elements and an innovative, precast deck panel system. The superstructure system consisted of full-depth dec...

76 FR 20784 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-13

... Brazil Index Fund (``EWZ''), the Market Vectors Gold Miners ETF (``GDX''), and the Energy Select Sector... volatility.\\6\\ \\6\\ CBOE will be the reporting authority for any Vol Index. CBOE will compute values for Vol... price or the calculated forward value of the respective Vol index. Transactions in Vol Index options may...

A Mechanistic Understanding of a Binary Additive System to Synergistically Boost Efficiency in All-Polymer Solar Cells

PubMed Central

Kim, Yu Jin; Ahn, Sunyong; Wang, Dong Hwan; Park, Chan Eon

2015-01-01

All-polymer solar cells are herein presented utilizing the PBDTTT-CT donor and the P(NDI2OD-T2) acceptor with 1,8-diiodooctane (DIO) and 1-chloronaphthalene (CN) binary solvent additives. A systematic study of the polymer/polymer bulk heterojunction photovoltaic cells processed from the binary additives revealed that the microstructures and photophysics were quite different from those of a pristine system. The combination of DIO and CN with a DIO/CN ratio of 3:1 (3 vol% DIO, 1 vol% CN and 96 vol% o-DCB) led to suitable penetrating polymer networks, efficient charge generation and balanced charge transport, which were all beneficial to improving the efficiency. This improvement is attributed to increase in power conversion efficiency from 2.81% for a device without additives to 4.39% for a device with the binary processing additives. A detailed investigation indicates that the changes in the polymer:polymer interactions resulted in the formation of a percolating nasnoscale morphology upon processing with the binary additives. Depth profile measurements with a two-dimensional grazing incidence wide-angle X-ray scattering confirm this optimum phase feature. Furthermore impedance spectroscopy also finds evidence for synergistically boosting the device performance. PMID:26658472

Evaluation of Non-Saccharomyces Yeasts for the Reduction of Alcohol Content in Wine

PubMed Central

Contreras, A.; Hidalgo, C.; Henschke, P. A.; Chambers, P. J.; Curtin, C.

2014-01-01

Over recent decades, the average ethanol concentration of wine has increased, largely due to consumer preference for wine styles associated with increased grape maturity; sugar content increases with grape maturity, and this translates into increased alcohol content in wine. However, high ethanol content impacts wine sensory properties, reducing the perceived complexity of flavors and aromas. In addition, for health and economic reasons, the wine sector is actively seeking technologies to facilitate the production of wines with lower ethanol content. Nonconventional yeast species, in particular, non-Saccharomyces yeasts, have shown potential for producing wines with lower alcohol content. These yeast species, which are largely associated with grapes preharvest, are present in the early stages of fermentation but, in general, are not capable of completing alcoholic fermentation. We have evaluated 50 different non-Saccharomyces isolates belonging to 24 different genera for their capacity to produce wine with a lower ethanol concentration when used in sequential inoculation regimes with a Saccharomyces cerevisiae wine strain. A sequential inoculation of Metschnikowia pulcherrima AWRI1149 followed by an S. cerevisiae wine strain was best able to produce wine with an ethanol concentration lower than that achieved with the single-inoculum, wine yeast control. Sequential fermentations utilizing AWRI1149 produced wines with 0.9% (vol/vol) and 1.6% (vol/vol) (corresponding to 7.1 g/liter and 12.6 g/liter, respectively) lower ethanol concentrations in Chardonnay and Shiraz wines, respectively. In Chardonnay wine, the total concentration of esters and higher alcohols was higher for wines generated from sequential inoculations, whereas the total concentration of volatile acids was significantly lower. In sequentially inoculated Shiraz wines, the total concentration of higher alcohols was higher and the total concentration of volatile acids was reduced compared with those in control S. cerevisiae wines, whereas the total concentrations of esters were not significantly different. PMID:24375129

The ocean quasi-homogeneous layer model and global cycle of carbon dioxide in system of atmosphere-ocean

NASA Astrophysics Data System (ADS)

Glushkov, Alexander; Glushkov, Alexander; Loboda, Nataliya; Khokhlov, Valery; Serbov, Nikoly; Svinarenko, Andrey

The purpose of this paper is carrying out the detailed model of the CO2 global turnover in system of "atmosphere-ocean" with using the ocean quasi-homogeneous layer model. Practically all carried out models are functioning in the average annual regime and accounting for the carbon distribution in bio-sphere in most general form (Glushkov et al, 2003). We construct a modified model for cycle of the carbon dioxide, which allows to reproduce a season dynamics of carbon turnover in ocean with account of zone ocean structure (up quasi-homogeneous layer, thermocline and deepest layer). It is taken into account dependence of the CO2 transfer through the bounder between atmosphere and ocean upon temperature of water and air, wind velocity, buffer mechanism of the CO2 dissolution. The same program is realized for atmosphere part of whole system. It is obtained a tempo-ral and space distribution for concentration of non-organic carbon in ocean, partial press of dissolute CO2 and value of exchange on the border between atmosphere and ocean. It is estimated a role of the wind intermixing of the up ocean layer. The increasing of this effect leads to increasing the plankton mass and further particles, which are transferred by wind, contribute to more quick immersion of microscopic shells and organic material. It is fulfilled investigation of sen-sibility of the master differential equations system solutions from the model parameters. The master differential equa-tions system, describing a dynamics of the CO2 cycle, is numerically integrated by the four order Runge-Cutt method under given initial values of valuables till output of solution on periodic regime. At first it is indicated on possible real-zation of the chaos scenario in system. On our data, the difference of the average annual values for the non-organic car-bon concentration in the up quasi-homogeneous layer between equator and extreme southern zone is 0.15 mol/m3, be-tween the equator and extreme northern zone is 0.12 mol/m3. the maximum amplitude of season oscillations (40° -50° n.l.) is 0.07 mol/m3. A link between global cycle of carbon dioxide and global climate change is investigated. Refrences: Glushkov A.V., Khokhlov V.N., Prepelitsa G.P., Tsenenko I.A., Optics of atmosphere and ocean.-2004.-Vol.14,N7.-p.219-223; Glushkov A.V., Loboda N.S., Khokhlov V.N., Atmospheric Research (Elseiver).-2005.-Vol.77.-P.100-113;Glushkov A.V., Loboda N.S., Khokhlov V.N., Lovett L. Journal of Hydrology (Elseiver).-2006.-Vol. 322. N1-4.-P.14-24; Glushkov A.V., Khokhlov V.N., Loboda N.S., Quart.J.Royal Meteorol. Soc.-2006.-Vol.132.- pp.447-465; Glushkov A.V., Khokhlov V.N., Loboda N.S., Ponomarenko E.L., Environm. Inf. Arch.-2003.-Vol.1.-P.125-130.

REVIEW ARTICLE: State-of-the-art of battery state-of-charge determination

NASA Astrophysics Data System (ADS)

Pop, V.; Bergveld, H. J.; Notten, P. H. L.; Regtien, P. P. L.

2005-12-01

From the early days of its discovery, humanity has depended on electricity, a phenomenon without which our technological advancements would not have been possible. With the increased need for mobility, people moved to portable power storage—first for wheeled applications, then for portable and finally nowadays wearable use. Several types of rechargeable battery systems, including those of lead-acid, nickel-cadmium, nickel-metal hydride, lithium ion and lithium-ion polymer exist in the market. The most important of them will be discussed in this review. Almost as long as rechargeable batteries have existed, systems able to give an indication about the state-of-charge (SoC) of a battery have been around. Several methods, including those of direct measurements, book-keeping and adaptive systems (Bergveld et al 2002 Battery Management Systems, Design by Modelling (Philips Research Book Series) vol 1 (Boston: Kluwer)) are known in the art for determining the SoC of a cell or battery of cells. An accurate SoC determination method and an understandable and reliable SoC display to the user will improve the performance and reliability, and will ultimately lengthen the lifetime of the battery. However, many examples of poor accuracy and reliability can be found in practice (Bergveld et al 2002, cited above). This review presents an overview on battery technology and the state-of-the-art of SoC methods. The goal of all the presented SoC indication methods is to design an SoC indication system capable of providing an accurate SoC indication under all realistic user conditions, including those of spread—in both battery and user behaviour, a large temperature and current range and ageing of the battery.

Integrated System for Autonomous Science

NASA Technical Reports Server (NTRS)

Chien, Steve; Sherwood, Robert; Tran, Daniel; Cichy, Benjamin; Davies, Ashley; Castano, Rebecca; Rabideau, Gregg; Frye, Stuart; Trout, Bruce; Shulman, Seth;

Fischer-Tropsch fuel for use by the U.S. military as battlefield-use fuel of the future

DOE Office of Scientific and Technical Information (OSTI.GOV)

Delanie Lamprecht

2007-06-15

The United States Department of Defense (DoD) has been interested in low-sulfur, environmentally cleaner Fischer-Tropsch (FT) fuels since 2001 because they want to be less dependent upon foreign crude oil and ensure the security of the supply. A three-phase Joint Battlefield-Use Fuel of the Future (BUFF) program was initiated to evaluate, demonstrate, certify, and implement turbine fuels produced from alternative energy resources for use in all of its gas turbine and diesel engine applications. Sasol Synfuels International (Pty) Ltd. and Sasol Chevron Holdings Ltd., among others, were invited to participate in the program with the objective to supply the DoDmore » with a FT BUFF that conforms to Jet Propulsion 8 (JP-8) and JP-5 fuel volatility and low-temperature fluidity requirements. Although the DoD is more interested in coal-to-liquid (CTL) technology, the product from a gas-to-liquid (GTL) Products Work-Up Demonstration Unit in Sasolburg, South Africa, was used to evaluate (on a bench scale) the possibility of producing a BUFF fraction from the Sasol Slurry Phase Distillate (Sasol SPD) low-temperature FT (LTFT) process and Chevron Isocracking technology. It was concluded from the study that the production of a synthetic FT BUFF is feasible using the Sasol SPD LTFT technology together with the current Chevron isocracking technology. The product yield for a BUFF conforming to JP-8 requirements is 30 vol % of the fractionator feed, whereas the product yield for a BUFF conforming to the JP-5 volatility requirement is slightly less than 22 vol % of the fractionator feed. Also concluded from the study was that the end point of the Sasol SPD LTFT BUFF will be restricted by the freezing point requirement of the DoD and not the maximum viscosity requirement. One would therefore need to optimize the hydrocracking process conditions to increase the Sasol SPD LTFT BUFF product yield. 16 refs., 8 figs., 6 tabs.« less

Comparison between electrically evoked and voluntary isometric contractions for biceps brachii muscle oxidative metabolism using near-infrared spectroscopy.

PubMed

Muthalib, Makii; Jubeau, Marc; Millet, Guillaume Y; Maffiuletti, Nicola A; Nosaka, Kazunori

2009-09-01

This study compared voluntary (VOL) and electrically evoked isometric contractions by muscle stimulation (EMS) for changes in biceps brachii muscle oxygenation (tissue oxygenation index, DeltaTOI) and total haemoglobin concentration (DeltatHb = oxygenated haemoglobin + deoxygenated haemoglobin) determined by near-infrared spectroscopy. Twelve men performed EMS with one arm followed 24 h later by VOL with the contralateral arm, consisting of 30 repeated (1-s contraction, 1-s relaxation) isometric contractions at 30% of maximal voluntary contraction (MVC) for the first 60 s, and maximal intensity contractions thereafter (MVC for VOL and maximal tolerable current at 30 Hz for EMS) until MVC decreased approximately 30% of pre-exercise MVC. During the 30 contractions at 30% MVC, DeltaTOI decrease was significantly (P < 0.05) greater and DeltatHb was significantly (P < 0.05) lower for EMS than VOL, suggesting that the metabolic demand for oxygen in EMS is greater than VOL at the same torque level. However, during maximal intensity contractions, although EMS torque (approximately 40% of VOL) was significantly (P < 0.05) lower than VOL, DeltaTOI was similar and tHb was significantly (P < 0.05) lower for EMS than VOL towards the end, without significant differences between the two sessions in the recovery period. It is concluded that the oxygen demand of the activated biceps brachii muscle in EMS is comparable to VOL at maximal intensity.

Development of tearing instability in a current sheet forming by sheared incompressible flow

NASA Astrophysics Data System (ADS)

Tolman, Elizabeth A.; Loureiro, Nuno F.; Uzdensky, Dmitri A.

2018-02-01

Sweet-Parker current sheets in high Lundquist number plasmas are unstable to tearing, suggesting they will not form in physical systems. Understanding magnetic reconnection thus requires study of the stability of a current sheet as it forms. Formation can occur due to sheared, sub-Alfvénic incompressible flows which narrow the sheet. Standard tearing theory (Furth et al. Phys. Fluids, vol. 6 (4), 1963, pp. 459-484, Rutherford, Phys. Fluids, vol. 16 (11), 1973, pp. 1903-1908, Coppi et al. Fizika Plazmy, vol. 2, 1976, pp. 961-966) is not immediately applicable to such forming sheets for two reasons: first, because the flow introduces terms not present in the standard calculation; second, because the changing equilibrium introduces time dependence to terms which are constant in the standard calculation, complicating the formulation of an eigenvalue problem. This paper adapts standard tearing mode analysis to confront these challenges. In an initial phase when any perturbations are primarily governed by ideal magnetohydrodynamics, a coordinate transformation reveals that the flow compresses and stretches perturbations. A multiple scale formulation describes how linear tearing mode theory (Furth et al. Phys. Fluids, vol. 6 (4), 1963, pp. 459-484, Coppi et al. Fizika Plazmy, vol. 2, 1976, pp. 961-966) can be applied to an equilibrium changing under flow, showing that the flow affects the separable exponential growth only implicitly, by making the standard scalings time dependent. In the nonlinear Rutherford stage, the coordinate transformation shows that standard theory can be adapted by adding to the stationary rates time dependence and an additional term due to the strengthening equilibrium magnetic field. Overall, this understanding supports the use of flow-free scalings with slight modifications to study tearing in a forming sheet.

Dynamics of pH modification of an acidic protein bait used for tropical fruit flies (Diptera: Tephritidae).

PubMed

Heath, Robert R; Vazquez, Aime; Schnell, Elena Q; Villareal, Janett; Kendra, Paul E; Epsky, Nancy D

2009-12-01

Several species of Anastrepha and Bactrocera fruit flies (Diptera: Tephritidae) are captured in traps baited with the protein bait NuLure combined with borax (sodium tetraborate decahydrate) in an aqueous solution, typically 9% NuLure (vol:vol) with 3% borax (wt:vol). NuLure is an acid hydrolysate of corn and has an acidic pH. Addition of borax makes the solution more alkaline, and increase in alkalinity results in increase of ammonia release from the bait solution. This is a very dynamic system, with resultant pH affected by factors such as the amount of borax added, the pH of the water used for preparation, the age of the bait solution, and the development of microbial growth. Problems with borax include amount needed to increase alkalinity of NuLure solutions, which creates difficulties in disposing of spent bait in fruit fly trapping programs. Therefore, research was conducted to evaluate NaOH as an alternative method to increase alkalinity of NuLure solutions. Laboratory experiments compared effect of NaOH versus borax for pH modification on changes in pH and ammonia content of NuLure solutions over time. Although NuLure/NaOH solutions could be adjusted to a more alkaline pH than NuLure/borax solutions, borax plays a critical role in pH stability over time. However, the pH of NuLure/NaOH is stabilized when propylene glycol (10% vol:vol) was used to prepare the bait solution. The use of NaOH can provide an alternative to the use of borax to increase bait solution alkalinity.

Optimization of Tangential Mass Injection for Minimizing Flow Separation in a Scramjet Inlet

DTIC Science & Technology

1991-12-01

34 Aerospace EnQineering, Vol. 11. No. 8, August 1991, p.23. 26. Heppenheimer , Thomas A . Lecture notes from Hypersonic Technologies seminar. University...AFIT/GAE/ENY,/9 lD-2 ( /~ AD-A243 868 "DTIC OPTIMIZATION OF TANGENTIAL MASS INJECTION FOR MINIMIZING FLOW SEPARATION IN A SC.R-.MJET INLET THESIS...OF TANGENTIAL MASS INJECTION FOR MINIMIZING FLOW SEPARATION IN A SCRAMJET INLEr THESIS Presented to the Faculty of the School of E.ngineering of the

Cleveland-Akron Metropolitan and Three Rivers Watershed Area. Wastewater Management Survey Scope Study. Appendix V. Land Treatment. Phase I Report.

DTIC Science & Technology

1973-08-01

Cincinnati, 1961. 12. Keeney, D. R. "Nitrates in Plants and Waters," Journal of Milk and Food Technology, October, 1970, Vol. 33, No. 10. 13. Kaser, P...nutrients; to supply calcium and sometimes magnesium; to increase the microbial ac- I tivity and improve soil structure and tilth. 9 The following... microbially converted to available inorganic forms (mineralization). This release of applied organic nutri- ents to available forms is a slow process; thus it

Propeller Design Studies for the Acoustic Research Ship C.F.A.V. QUEST,

DTIC Science & Technology

1981-08-01

8. 5. Manen , J.D. van , "Fundamentals of Ship Resistance and Propulsion Part B", International Shipbuilding Progress Vol. 4, No. 30, February 1957. 6...Oossanen, P. van "Calculation of Performance and Cavitation Characteristics of Propellers, Including the Effects of Non-Uniform Flow". PhD thesis...Delft U;.iversity of Technology, 1974. Also NSMB Publ!cat -,7 457 7. Gent, W. van . "On the Use of Lifting Surface Theory for Moderately and Heavily

Alternative Measured-Service Rate Structures for Local Telephone Service,

DTIC Science & Technology

1980-06-01

contracts or grants . Views expressed in a Papet are the author’s own, and are not necessarily shared by Rand or its research sponsors. The Rand Corporation...by National Science Foundation, grant DAR 77-16286 to The Rand Corporation. Measuring costs depend strongly on the technology of the telephone network...a Budget Constraint. The Case of the Two-Part Tariff," Review of Economic Studies, July 1974, Vol. 41, pp. 337-345. -28- Oi, W. Y., "A Disneyland

The Earth’s Atmosphere: Ideas Old and New.

DTIC Science & Technology

1985-04-01

Macmillan Press. 45. Wolf, A., 1952. A History of Science , Technology and Philosophy in the 18th t " Century. 2 vols. Allen and Unwin, London. 46...you to conclude what you will from what I have said: I can only give my own views. I think the history of science sharpens our perceptions, of the...gladly create these concepts, which are then popularized by the popularizers and earn credit for the creators. The history of science is like an X-ray

Photonic Materials and Devices for Optical Information Processing and Computing Applications

DTIC Science & Technology

1991-09-14

Odulov. and X. Soskin. "Diffraction or coupled - aves and ’.-termination of phase mismatch between ho- lographic ;rating and fringe pauter.’ Opt. Acta. vol...linear approximation is most accurate occur for strong levels of av - erage incoherent light illumination I. Two Grating Transcription. When an...Crystal Technology. Inc.. 1060 E. Meadow Circle. Palo Alto. CA 94303 Op-ed. Pnwenrnw and C e.N a0 Coynr C 19" by Acaro : PaSN . Inc. All non of hplrinua amy

Modelling of Picosatellite Constellation-Based Network and Effects on Quality of Service

DTIC Science & Technology

2015-03-01

the STK -QualNet Interface module. The analysis period for the scenario simulation was chosen as a two-day period from 6 June 2011 to 7 June 2011. This...MIN 0:00:04 0:00:34 AVERAGE 0:58:03 0:21:21 27 THIS PAGE INTENTIONALLY LEFT BLANK 28 VI. DATA ANALYSIS /INTERPRETATION The STK model was... Mission Analysis and Design, 3rd ed. (Space Technology Library, vol. 8). El Segundo, CA: Microcosm, 1999. [5] exactEarth. (2015). ExactView

The Evolution and Impact of PCS Technology.

DTIC Science & Technology

1994-09-01

CTIA), June, 1994), p. 4. 44 Communication Daily, Vol. 14, No. 137, July 18, 1994, p.3. i45 FinTech Mobile Communications, June 16, 1994. 46 FCC...a palm-sized portable answering machine 3 which can receive and replay voice messages based on Voice Now service being developed I 47 FinTech Mobile...1994. 66 FinTech Mobile Communications, June 16, 1994. 67 Leslie Cauley, "U S West Inc., AirTouch Plan," Wall Street Journal, July 26, 1994. I II-10

Shock waves; Proceedings of the 18th International Symposium, Sendai, Japan, July 21-26, 1991. Vols. 1 & 2

NASA Astrophysics Data System (ADS)

Takayama, Kazuyoshi

Various papers on shock waves are presented. The general topics addressed include: shock wave structure, propagation, and interaction; shock wave reflection, diffraction, refraction, and focusing; shock waves in condensed matter; shock waves in dusty gases and multiphase media; hypersonic flows and shock waves; chemical processes and related combustion phenomena; explosions, blast waves, and laser initiation of shock waves; shock tube technology and instrumentation; CFD of shock wave phenomena; medical applications and biological effects; industrial applications.

United States Air Force Summer Faculty Research Program. Management Report. Volume 3

DTIC Science & Technology

1988-12-01

xyz values are basically correct, we plotted the perspective view of a target using the xyz values with MATLAB (a matrix-based mathematics softwaie...initially included all the pixels of the image in calculating votes for each accumulator. Two target types, the M-60 tank and the fuel truck, were used...J.F., Gouin, H. and Gaviglio, J., "Evolution of the Reynolds Stress Tensor in a Shock Wave-Turbulence Interaction," Indian Journal of Technology, Vol

Media Selection for the Development of a Hypermedia/Multimedia Instructional Model for the Navy’s 76mm Gun

DTIC Science & Technology

1993-09-01

placed on the timeline when called. The timeline editor is also used when creating a hypertext/hypermedia document. a FrameMaker FrameMaker is a...Framemaker’s multi-platform capability permits document sharing and allows for easy importing of text and graphics from other application software. Framemaker ...Technology Corporation, FrameMaker Reference, September 1990. Glaser, R., "Education and Thinking: The Role of Knowledge", American Psychologist, Vol. 39, No

JPRS Report, Science & Technology, USSR: Space Biology & Aerospace Medicine, Vol. 21, No. 6, November-December 1987.

DTIC Science & Technology

1988-03-11

the dia- lectics of development of social relations which open up a wide arena for initiative and creativity of the masses. This course, as stated by...through renewal of all areas of social life. And, of course, the success of restructuring depends on the extent to which its concepts are grasped by...an integral content that is determined by the course of objective laws of social develop- ment, in this case, development of a classless, social

An Analysis of How Education, Age, Overseas Assignments, and Mavenism Impact Use of New Media Technology

DTIC Science & Technology

2010-12-01

The Journal of Consumer Marketing, Vol. 12, Iss 3, 4 -22. Yang, D. (2007) What Happens If Facebook Thinks You’re Not Real? Retrieved on January 10...48 Appendix C – Instrument 3 -List of Semi-Structured Interview questions .......................49 Appendix D – Instrument 4 - Instructions for...Internet users have watched a 4 video online. This same report showed that 85% of young broadband users have watched an online video, and 62

Fault Tolerant VLSI Design Assessments for Advanced Avionics Department

DTIC Science & Technology

1982-02-06

negative sense. Another facet of the literature review is to acquaint the researchers with the immense literature base for electronic technology applicable ...Report: Semiconductor Memories are Tested Over Data-Storage Application ", Electronics, vol. 46, August 19. G. Luecke, J. P. Mlize and W. N. Carr...Semiconductor Memories, Desi-n and Application , New York, McGraw iLiii, 1973. 20. P, A. Lee, N. Ghani and K. Heron, "A Recovery Cache for the PDP-lI" Digest

JPRS Report, Science & Technology, USSR: Life Sciences

DTIC Science & Technology

1989-03-07

BIOORGANICHESKAYA KHIMIYA, Vol 14 No 4, Apr 88] 19 Intrinsic Fluorescence Studies on Effects of pH on Structure of Mistletoe Lectin [T. L. Bushuyeva, A. G...Figures 2; references 15: 3 Russian, 12 Western. UDC 576.8.097.29:547.962.3 Intrinsic Fluorescence Studies on Effects of pH on Structure of Mistletoe ...characteristics of the mistletoe lectin I (MLI), a molecule consisting of A (29 kD) and a B (34 kD) subunit, were used in assessing the structural

Labor Supply of Wives with Husbands Employed Either Full Time or Part Time.

DTIC Science & Technology

1980-02-01

Nantcy. Ka ,serg David. ’ New Technology and Naval Forces view, Vol. 30. No. 40. Jul 1977) "’Public Drug Treatmonfl adid Addict Crime." Jun in ihr South...husbands, the costs incidental to the wife’s workinq are money costs -- for suitable babysitters , for example. Evidence for this is the larqer absolute value...The Economics of Labor Force Particiioatlon. Princeton, New Jersey: Princeton University Pr e ss, 1969.7 Cailn, Glen. Mar ried Women in the Labor

Environmentally Assisted Cracking of High Strength Beta Titanium Alloys

DTIC Science & Technology

1993-11-01

financially supported by the Virginia Center for Innovative Technology TDC on Electrochemical Science and Engineering (Grant CIT- TDC -88-01) and by the Office...Material Behayir, N.R. Moody and A.W. Thompson, eds., TMS -AIME, Warrendale, PA, p. 891(1990). 18. 0. Vosikovsky, J.Tt. EyaL, Vol. 6, p. 175 (1978). 19...acknowledged. 3 23 REFERENCES 1. Beta Titanium Alloys in the 80’s R.R. Boyer and H.W. Rosenberg, eds., TMS -AIME,3 Warrendale, PA. pp. 209-229, 1983. 2

Blind Cyclostationary Feature Detection Based Spectrum Sensing for Autonomous Self-Learning Cognitive Radios

DTIC Science & Technology

2012-06-01

communication policies. Given the importance of machine learning and reconfig- urable hardware in the design of the Radiobots [1], we propose, in this paper, a...liter- ature, including, for example, the model in [9] which uses support vector machines (SVM’s). In this paper, however, we employ non-parametric...Communication Technology (ICACT ’08), vol. 1, Gangwon-Do, South Korea, Feb. 2008, pp. 481 – 485. [9] M. Ramon, T. Atwood , S. Barbin, and C

GET REAL!

EPA Science Inventory

Combined sewer overflow (CSO) is a significant source of pollution in receiving waters. However, implementing a real-time control scheme operates automatic regulators more efficiently to maximize a collection system's storage, treatment, and transport capacities, reducing the vol...

Recruiting Effects of Army Advertising

DTIC Science & Technology

1989-01-01

Journal of Advertising Research , Vol. 20, No. 4, August 1980. Assmus...Vol. 21, No. 1, February 1984. Aykac, Ahmet, Marcel Corstijens, and David Gautschi, "Is There a Kink in Your Advertising?" Journal of Advertising Research , Vol...A. Jay, and T. Twyman, "The Validity of Advertising Pretests," Journal of Advertising Research , Vol. 17, No. 2, 1977. Box, G. E. P., and Larry

High voltage AC/AC electrochemical capacitor operating at low temperature in salt aqueous electrolyte

NASA Astrophysics Data System (ADS)

Abbas, Qamar; Béguin, François

2016-06-01

We demonstrate that an activated carbon (AC)-based electrochemical capacitor implementing aqueous lithium sulfate electrolyte in 7:3 vol:vol water/methanol mixture can operate down to -40 °C with good electrochemical performance. Three-electrode cell investigations show that the faradaic contributions related with hydrogen chemisorption in the negative AC electrode are thermodynamically unfavored at -40 °C, enabling the system to work as a typical electrical double-layer (EDL) capacitor. After prolonged floating of the AC/AC capacitor at 1.6 V and -40°C, the capacitance, equivalent series resistance and efficiency remain constant, demonstrating the absence of ageing related with side redox reactions at this temperature. Interestingly, when temperature is increased back to 24 °C, the redox behavior due to hydrogen storage reappears and the system behaves as a freshly prepared one.

Microtectonic-assisted P-T determination on low-grade Alpine metamorphic rocks from the "Tisia Mega-Unit" of the Slavonian Mountains in Croatia

NASA Astrophysics Data System (ADS)

Balen, Dražen; Lihter, Iva; Massonne, Hans-Joachim

2016-04-01

The internal structure of the Tisia (Tisza) Mega-Unit in the Alpine-Carpathian-Dinaridic orogenic system encompasses large Alpine nappe systems brought to its present-day position by complex regional-scale movements. The Slavonian Mountains are part of the Bihor nappe system which is below the Codru and above the Mecsek nappe systems. The low-grade metamorphic schist unit of the Slavonian Mountains includes numerous rocks which were previously related to Precambrian and/or Lower Paleozoic orogeneses. However, recent studies (e.g. Balen, 2014, European Geosciences Union General Assembly, EGU 2014-6122) show that the metapelites of this unit should be attributed to the Alpine orogeny and the poorly known P-T conditions, which they experienced, should be refined. Although metapelites can be sensitive to changes of metamorphic conditions and, therefore, be suitable for the P-T estimation of metamorphic event(s), the extraction of mineral assemblages, being in equilibrium, and associated microtectonic data for particular low-grade metamorphic rocks is not straightforward. On the contrary, due to lack of suitable minerals and complex mictotectonic features, one can be faced with a severe problem concerning (dis)equilibrium. To avoid this, the observation scale in the research was set to the sub-mm level taking into account microtectonic positions of minerals. The investigated samples from the Slavonian Mountains are fine-grained schists consisting of chlorite (15-30 vol. %), white mica (15-25 vol. %), quartz (10-25 vol. %), feldspars (albite 10-15 vol. %; some K-feldspar), biotite (<5 vol. %), opaques (<5 vol. %), and accessory minerals (zircon, monazite, xenotime, apatite, chalcopyrite, pyrite, barite, parisite-(Ce), rutile). The schists show complex microtectonic fabric including well-developed foliations, pervasive folding, crenulation and cleavage. Foliations are defined by the preferred orientation of phyllosilicates and thin quartz and feldspar ribbons. Chlorite and white mica oriented along the S1 foliation are up to 50 μm long grains whereas those oriented along the S2 foliation are as large as 500 μm. Chlorite is ripidolite; potassic white mica is muscovite to phengite. Both minerals show a systematic variation in chemical composition such as higher Si contents in white mica and lower XFe in chlorite of the S1 assemblage compared to the S2 assemblage. The application of classical chlorite thermometers, based on Si, Al, Fe, and Mg contents of chlorite, and phengite gave P-T conditions of 325-350 °C around 4.6 kbar and 315-330 °C around 3.8 kbar for the S1 and S2 minerals, respectively. Constructions of pseudosections in the system MnNCKFMASHTO with PERPLEX confirmed these P-T ranges yielding 3.1-4.7 kbar and 300-360 °C based on intersections of XFe (chlorite) and Si (phengite) isopleths. The P-T range is in accordance with the critical reaction chlorite + K-feldspar = biotite + K-white mica in the presence of quartz and H2O. The presented refinement of the P-T data for the studied metapelites combined with two sets of known monazite ages (113±20 and 82±23 Ma; Balen, 2014) has a significance in clarifying details of the geodynamic evolution during the Alpine orogeny. Financial support by the Croatian Science Foundation (IP-2014-09-9541) and T. Theye's help during microprobe work is greatly acknowledged.

Chicago Monostatic Acoustic Vortex Sensing System : Vol. III. Decay of B-707 and DC-8 Vortices. Executive Summary

DOT National Transportation Integrated Search

1982-01-01

A Monostatic Acoustic Vortex Sensing System (MAVSS) was installed at Chicago's O'Hare International Airport to measure the strength and decay of aircraft wake vortices from landing aircraft. The MAVSS consists of an array of acoustic antennas which m...

Multi-Target Tracking for Swarm vs. Swarm UAV Systems

DTIC Science & Technology

2012-09-01

Uhlmann, “Using covariance intersection for SLAM,” Robotics and Autonomous Systems, vol. 55, pp. 3–20, Jan. 2007. [10] R. B. G. Wolfgang Niehsen... Krause , J. Leskovec, and C. Guestrin, “Data association for topic intensity track- ing,” Proceedings of the 23rd international conference on Machine

MODELS-3 (CMAQ). NARSTO NEWS (VOL. 3, NO. 2, SUMMER/FALL 1999)

EPA Science Inventory

A revised version of the U.S. EPA's Models-3/CMAQ system was released on June 30, 1999. Models-3 consists of a sophisticated computational framework for environmental models allowing for much flexibility in the communications between component parts of the system, in updating or ...

76 FR 52131 - Defense Federal Acquisition Regulation Supplement; Nonavailability Exception for Procurement of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-19

... Vol. 76 Friday, No. 161 August 19, 2011 Part III Department of Defense Defense Acquisition Regulations System 48 CFR Parts 201, 209, 216, et al. Defense Federal Acquisition Regulation Supplements... DEFENSE Defense Acquisition Regulations System 48 CFR Part 225 RIN 0750-AH17 Defense Federal Acquisition...

Systems Management for Force Modernization Equipment.

DTIC Science & Technology

1982-04-15

PERT (New York: John Wiley & Sons, Inc., 1963), p. ’𔄁. 8. Fred Luthans, Introduction to Management (New York: McGraw- Hill Book Company, 1976), p...34Fielding Army Systems: Experiences and Lessons Learned." C, Vol. 3, No. 4, Autumn, 1980. Luthans, Fred. Introduction to Management . New York: McGraw

A Passage in Time

ERIC Educational Resources Information Center

Language Teaching, 2013

2013-01-01

In 1975 (Vol. 8.4, 201-218), S. P. Corder, during the course of his state-of-the-art review "Error analysis, interlanguage and second language acquisition," focused on the recent literature on simplified linguistic systems and suggested that research had shown that interlanguage systems often resemble other simple codes such as pidgins…

Track-Before-Declare Methods in IR Image Sequences

DTIC Science & Technology

1992-09-01

processing methods of this type, known as track- before-declare (TBD), and sometimes by the misleading term track - before - detect , have been employed in systems...Electronic Systems, Vol. AES-il, No. 6. November 1975. 8. A. Corbeil, J. DiDomizio, Track - Before - Detect Development and Demonstration Program, Phase

System for the Analysis of Global Energy Markets - Vol. II, Model Documentation

EIA Publications

2003-01-01

The second volume provides a data implementation guide that lists all naming conventions and model constraints. In addition, Volume 1 has two appendixes that provide a schematic of the System for the Analysis of Global Energy Markets (SAGE) structure and a listing of the source code, respectively.

Design and Analysis of an Axisymmetric Phased Array Fed Gregorian Reflector System for Limited Scanning

DTIC Science & Technology

2016-01-22

applications. For space applications, attitude control systems can provide good angular control of the antenna aperture with small residual angular...Bilyeu, and G.R. Veal, Development of Flight Hardware for a Large Inflatable- Deployable Antenna Experiment , Acta Astronautica, Vol. 38, Nos. 4-8

A Weathering Index for CK and R Chondrites

NASA Technical Reports Server (NTRS)

Rubin, Alan E.; Huber, Heinz

2006-01-01

We present a new weathering index (wi) for the metallic-Fe-Ni-poor chondrite groups (CK and R) based mainly on transmitted light observations of the modal abundance of crystalline material that is stained brown in thin sections: wi-0, <5 vol%; wi-1, 5-25 vol%; wi-2,25-50 vol%; wi-3,50- 75 vol%; wi-4, 75-95 vol%; wi-5, >95 vol%, wi-6, significant replacement of mafic silicates by phyllosilicates. Brown staining reflects mobilization of oxidized iron derived mainly from terrestrial weathering of Ni-bearing sulfide. With increasing degrees of terrestrial weathering of CK and R chondrites, the sulfide modal abundance decreases, and S, Se, and Ni become increasingly depleted. In addition, bulk Cl increases in Antarctic CK chondrites, probably due to contamination from airborne sea mist.

Remedial Investigation Badger Army Ammunition Plant, Baraboo, Wisconsin. Volume 3. Appendices G Through J

DTIC Science & Technology

1991-01-01

B~est Availlable COPY AD-A280 438’El UlHI~ll lIMEll l Ulll "U.S. Army Environmental Center 7C, 0* £0 t;,2.’ . .. US AR.Y E[N,’IP r TM,’.F A, CENtIR...Split Groundwater Samples Vol. 6 APPENDIX M - CALCULATIONS FOR PARAMETERS USED IN RISK ASSESSMENT Vol. 7 APPENDIX N - IRIS FILES FOR COMPOUNDS OF...POTENTIAL CONCERN Vol. 7 APPENDIX 0 - HUMAN HEALTH RISK CALCULATIONS Vol. 7 APPENDIX P - INVENTORY OF SITE SPECIES Vol. 7 APPENDIX Q - EXPOSURE

Radar sensing via a Micro-UAV-borne system

NASA Astrophysics Data System (ADS)

Catapano, Ilaria; Ludeno, Giovanni; Gennarelli, Gianluca; Soldovieri, Francesco; Rodi Vetrella, Amedeo; Fasano, Giancarmine

2017-04-01

In recent years, the miniaturization of flight control systems and payloads has contributed to a fast and widespread diffusion of micro-UAV (Unmanned Aircraft Vehicle). While micro-UAV can be a powerful tool in several civil applications such as environmental monitoring and surveillance, unleashing their full potential for societal benefits requires augmenting their sensing capability beyond the realm of active/passive optical sensors [1]. In this frame, radar systems are drawing attention since they allow performing missions in all-weather and day/night conditions and, thanks to the microwave ability to penetrate opaque media, they enable the detection and localization not only of surface objects but also of sub-surface/hidden targets. However, micro-UAV-borne radar imaging represents still a new frontier, since it is much more than a matter of technology miniaturization or payload installation, which can take advantage of the newly developed ultralight systems. Indeed, micro-UAV-borne radar imaging entails scientific challenges in terms of electromagnetic modeling and knowledge of flight dynamics and control. As a consequence, despite Synthetic Aperture Radar (SAR) imaging is a traditional remote sensing tool, its adaptation to micro-UAV is an open issue and so far only few case studies concerning the integration of SAR and UAV technologies have been reported worldwide [2]. In addition, only early results concerning subsurface imaging by means of an UAV-mounted radar are available [3]. As a contribution to radar imaging via autonomous micro-UAV, this communication presents a proof-of-concept experiment. This experiment represents the first step towards the development of a general methodological approach that exploits expertise about (sub-)surface imaging and aerospace systems with the aim to provide high-resolution images of the surveyed scene. In details, at the conference, we will present the results of a flight campaign carried out by using a single radar-equipped drone. The system is made by a commercial radar system, whose mass, size, power and cost budgets is compatible with the installation on micro-UAV. The radar system has been mounted on a DJI 550 UAV, a flexible hexacopter allowing both complex flight operations and static flight, and has been equipped with small size log-periodic antennas, having a 6 dB gain over the frequency range from 2 GHz to 11 GHz. An ad-hoc signal processing chain has been adopted to process the collected raw data and obtain an image of the investigated scenario providing an accurate target detection and localization. This chain involves a SVD-based noise filter procedure and an advanced data processing approach, which assumes a linear model of the underlying scattering phenomenon. REFERENCES [1] K. Whitehead, C. H. Hugenholtz, "Remote sensing of the environment with small unmanned aircraft systems (UASs), part 1: a review of progress and challenges", J. Unmanned Vehicle Systems, vol.2, pp. 69-85, 2014. [2] K. Ouchi, Recent trend and advance of synthetic aperture radar with selected topics, Remote Sens, vol.5, pp.716-807, 2013. [3] D. Altdor et al., UAV-borne electromagnetic induction and ground-penetrating radar measurements: a feasibility test, 74th Annual Meeting of the Deutsche Geophysikalische Gesellschaft in Karlsruhe, Germany, March 9 - 13, 2014.

Challenges of anamorphic high-NA lithography and mask making

NASA Astrophysics Data System (ADS)

Hsu, Stephen D.; Liu, Jingjing

2017-06-01

Chip makers are actively working on the adoption of 0.33 numerical aperture (NA) EUV scanners for the 7-nm and 5-nm nodes (B. Turko, S. L. Carson, A. Lio, T. Liang, M. Phillips, et al., in `Proc. SPIE9776, Extreme Ultraviolet (EUV) Lithography VII', vol. 977602 (2016) doi: 10.1117/12.2225014; A. Lio, in `Proc. SPIE9776, Extreme Ultraviolet (EUV) Lithography VII', vol. 97760V (2016) doi: 10.1117/12.2225017). In the meantime, leading foundries and integrated device manufacturers are starting to investigate patterning options beyond the 5-nm node (O. Wood, S. Raghunathan, P. Mangat, V. Philipsen, V. Luong, et al., in `Proc. SPIE. 9422, Extreme Ultraviolet (EUV) Lithography VI', vol. 94220I (2015) doi: 10.1117/12.2085022). To minimize the cost and process complexity of multiple patterning beyond the 5-nm node, EUV high-NA single-exposure patterning is a preferred method over EUV double patterning (O. Wood, S. Raghunathan, P. Mangat, V. Philipsen, V. Luong, et al., in `Proc. SPIE. 9422, Extreme Ultraviolet (EUV) Lithography VI', vol. 94220I (2015) doi: 10.1117/12.2085022; J. van Schoot, K. van Ingen Schenau, G. Bottiglieri, K. Troost, J. Zimmerman, et al., `Proc. SPIE. 9776, Extreme Ultraviolet (EUV) Lithography VII', vol. 97761I (2016) doi: 10.1117/12.2220150). The EUV high-NA scanner equipped with a projection lens of 0.55 NA is designed to support resolutions below 10 nm. The high-NA system is beneficial for enhancing resolution, minimizing mask proximity correction bias, improving normalized image log slope (NILS), and controlling CD uniformity (CDU). However, increasing NA from 0.33 to 0.55 reduces the depth of focus (DOF) significantly. Therefore, the source mask optimization (SMO) with sub-resolution assist features (SRAFs) are needed to increase DOF to meet the demanding full chip process control requirements (S. Hsu, R. Howell, J. Jia, H.-Y. Liu, K. Gronlund, et al., EUV `Proc. SPIE9048, Extreme Ultraviolet (EUV) Lithography VI', (2015) doi: 10.1117/12.2086074). To ensure no assist feature printing, the assist feature sizes need to be scaled with λ/NA. The extremely small SRAF width (below 25 nm on the reticle) is difficult to fabricate across the full reticle. In this paper, we introduce an innovative `attenuated SRAF' to improve SRAF manufacturability and still maintain the process window benefit. A new mask fabrication process is proposed to use existing mask-making capability to manufacture the attenuated SRAFs. The high-NA EUV system utilizes anamorphic reduction; 4× in the horizontal (slit) direction and 8× in the vertical (scanning) direction (J. van Schoot, K. van Ingen Schenau, G. Bottiglieri, K. Troost, J. Zimmerman, et al., `Proc. SPIE. 9776, Extreme Ultraviolet (EUV) Lithography VII', vol. 97761I (2016) doi: 10.1117/12.2220150; B. Kneer, S. Migura, W. Kaiser, J. T. Neumann, J. van Schoot, in `Proc. SPIE9422, Extreme Ultraviolet (EUV) Lithography VI', vol. 94221G (2015) doi: 10.1117/12.2175488). For an anamorphic system, the magnification has an angular dependency, and thus, familiar mask specifications such as mask error factor (MEF) need to be redefined. Similarly, mask-manufacturing rule check (MRC) needs to consider feature orientation.

A high plasma: red blood cell transfusion ratio during liver transplantation is associated with decreased blood utilization.

PubMed

Pagano, M B; Metcalf, R A; Hess, J R; Reyes, J; Perkins, J D; Montenovo, M I

2018-04-01

During massive transfusion, the volume ratio of administered plasma (PL Vol) to red blood cell (RBC Vol) appears to be associated with reduced blood utilization and improved survival. The aim of this study was to evaluate the optimal component ratio in the setting of liver transplantation. This is a retrospective chart review of patients who underwent liver transplantation and received at least 500 ml of red blood cells from January 2013 through December 2015. Kernel smoothing analysis determined the proper component ratios to evaluate were a ≥0·85:1 ratio (high) to a ≤0·85:1 ratio (low). Two groups, plasma volume to RBC volume (PL Vol/RBC Vol) and plasma contained in the platelet units added to the plasma calculation [PL + PLT (platelet)] Vol/RBC Vol, were used to evaluate the component ratios. A total of 188 patients were included in the analysis. In the PL Vol/RBC Vol evaluation, a low ratio revealed that 1238 ml (977-1653 ml) (P < 0·0001) and 1178 ml (747-1178) (P < 0·0001) of RBC were used in excess compared to the high ratio, in the univariable and multivariable analysis, respectively. In the PL +PLT Vol/RBC Vol evaluation, a low ratio used 734 ml (193-1275) (P = 0·008) and 886 ml (431-1340) (P < 0·0001) of RBC in excess when compared to high ratio in the univariable and multivariable analysis, respectively. In patients undergoing liver transplantation, the transfusion of plasma to RBC ratio ≥0·85 was associated with decreased need of RBC transfusions. © 2018 International Society of Blood Transfusion.

The Influence of Preoperative Aneurysmal Thrombus Quantity and Distribution on the Development of Type II Endoleaks with Aneurysm Sac Enlargement After EVAR of AAA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Müller-Wille, R., E-mail: rene.mueller-wille@ukr.de; Güntner, O., E-mail: oliverguentner@yahoo.de; Zeman, F., E-mail: florian.zeman@ukr.de

PurposeTo determine the influence of preoperative aneurysmal thrombus quantity and distribution on the development of type II endoleak with aneurysm sac enlargement after endovascular aneurysm repair (EVAR).Materials and MethodsWe retrospectively analyzed the pre- and postoperatively performed CT scans of 118 patients who had follow-up imaging for at least 1 year after EVAR available. We assessed preoperative thrombus perimeter (T{sub Peri}), diameter (T{sub Dia}), cross-sectional area (T{sub CSA}), and volume (T{sub Vol}). The preoperative thrombus distribution was classified into no thrombus, semilunar-shaped (anterior, right side, left side, posterior) thrombus, and circumferential type thrombus. The number of preoperative patent aortic side branches (ASB)more » was identified. Endpoint was type II endoleak with aneurysm volume (A{sub Vol}) increase of ≥5 % during follow-up.ResultsDuring follow-up (2 years, range 1–9 years), 17 patients with type II endoleak had significant A{sub Vol} increase. Less preoperative T{sub Peri}, T{sub Dia}, T{sub CSA}, and T{sub Vol} were associated with A{sub Vol} increase. A circumferential thrombus distribution significantly protected against aneurysm enlargement (p = 0.028). The variables with the strongest significance for A{sub Vol} increase were preoperative T{sub Vol}/A{sub Vol} ratio (OR 0.95; p = 0.037) and number of patent ASB (OR 3.52; p < 0.001).ConclusionA low preoperative T{sub Vol}/A{sub Vol} ratio and a high number of patent ASB were associated with aneurysm sac enlargement after EVAR.« less

Hybrid Automated Diagnosis of Discrete/Continuous Systems

NASA Technical Reports Server (NTRS)

Park, Han; James, Mark; MacKey, Ryan; Cannon, Howard; Bajwa, Anapa; Maul, William

2007-01-01

A recently conceived method of automated diagnosis of a complex electromechanical system affords a complete set of capabilities for hybrid diagnosis in the case in which the state of the electromechanical system is characterized by both continuous and discrete values (as represented by analog and digital signals, respectively). The method is an integration of two complementary diagnostic systems: (1) beacon-based exception analysis for multi-missions (BEAM), which is primarily useful in the continuous domain and easily performs diagnoses in the presence of transients; and (2) Livingstone, which is primarily useful in the discrete domain and is typically restricted to quasi-steady conditions. BEAM has been described in several prior NASA Tech Briefs articles: "Software for Autonomous Diagnosis of Complex Systems" (NPO-20803), Vol. 26, No. 3 (March 2002), page 33; "Beacon-Based Exception Analysis for Multimissions" (NPO-20827), Vol. 26, No. 9 (September 2002), page 32; "Wavelet-Based Real-Time Diagnosis of Complex Systems" (NPO-20830), Vol. 27, No. 1 (January 2003), page 67; and "Integrated Formulation of Beacon-Based Exception Analysis for Multimissions" (NPO-21126), Vol. 27, No. 3 (March 2003), page 74. Briefly, BEAM is a complete data-analysis method, implemented in software, for real-time or off-line detection and characterization of faults. The basic premise of BEAM is to characterize a system from all available observations and train the characterization with respect to normal phases of operation. The observations are primarily continuous in nature. BEAM isolates anomalies by analyzing the deviations from nominal for each phase of operation. Livingstone is a model-based reasoner that uses a model of a system, controller commands, and sensor observations to track the system s state, and detect and diagnose faults. Livingstone models a system within the discrete domain. Therefore, continuous sensor readings, as well as time, must be discretized. To reason about continuous systems, Livingstone uses monitors that discretize the sensor readings using trending and thresholding techniques. In development of the a hybrid method, BEAM results were sent to Livingstone to serve as an independent source of evidence that is in addition to the evidence gathered by Livingstone standard monitors. The figure depicts the flow of data in an early version of a hybrid system dedicated to diagnosing a simulated electromechanical system. In effect, BEAM served as a "smart" monitor for Livingstone. BEAM read the simulation data, processed the data to form observations, and stored the observations in a file. A monitor stub synchronized the events recorded by BEAM with the output of the Livingstone standard monitors according to time tags. This information was fed to a real-time interface, which buffered and fed the information to Livingstone, and requested diagnoses at the appropriate times. In a test, the hybrid system was found to correctly identify a failed component in an electromechanical system for which neither BEAM nor Livingstone alone yielded the correct diagnosis.

32 CFR 65.5 - Responsibilities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Data System (RCCPDS)” (see http://www.dtic.mil/whs/directives/corres/pdf/773054m_vol1.pdf). (11) Direct... of Active Duty Military Personnel Records” (see http://www.dtic.mil/whs/directives/corres/pdf/133605p...

A simulation model for wind energy storage systems. Volume 3: Program descriptions

NASA Technical Reports Server (NTRS)

Warren, A. W.; Edsinger, R. W.; Burroughs, J. D.

1977-01-01

Program descriptions, flow charts, and program listings for the SIMWEST model generation program, the simulation program, the file maintenance program, and the printer plotter program are given. For Vol 2, see .

Hamiltonian flows with random-walk behaviour originating from zero-sum games and fictitious play

NASA Astrophysics Data System (ADS)

van Strien, Sebastian

2011-06-01

In this paper we introduce Hamiltonian dynamics, inspired by zero-sum games (best response and fictitious play dynamics). The Hamiltonian functions we consider are continuous and piecewise affine (and of a very simple form). It follows that the corresponding Hamiltonian vector fields are discontinuous and multi-valued. Differential equations with discontinuities along a hyperplane are often called 'Filippov systems', and there is a large literature on such systems, see for example (di Bernardo et al 2008 Theory and applications Piecewise-Smooth Dynamical Systems (Applied Mathematical Sciences vol 163) (London: Springer); Kunze 2000 Non-Smooth Dynamical Systems (Lecture Notes in Mathematics vol 1744) (Berlin: Springer); Leine and Nijmeijer 2004 Dynamics and Bifurcations of Non-smooth Mechanical Systems (Lecture Notes in Applied and Computational Mechanics vol 18) (Berlin: Springer)). The special feature of the systems we consider here is that they have discontinuities along a large number of intersecting hyperplanes. Nevertheless, somewhat surprisingly, the flow corresponding to such a vector field exists, is unique and continuous. We believe that these vector fields deserve attention, because it turns out that the resulting dynamics are rather different from those found in more classically defined Hamiltonian dynamics. The vector field is extremely simple: outside codimension-one hyperplanes it is piecewise constant and so the flow phit piecewise a translation (without stationary points). Even so, the dynamics can be rather rich and complicated as a detailed study of specific examples show (see for example theorems 7.1 and 7.2 and also (Ostrovski and van Strien 2011 Regular Chaotic Dynf. 16 129-54)). In the last two sections of the paper we give some applications to game theory, and finish with posing a version of the Palis conjecture in the context of the class of non-smooth systems studied in this paper. To Jacob Palis on his 70th birthday.

Community Report and Recommendations from International Lunar Exploration Working Group (ILEWG)

NASA Astrophysics Data System (ADS)

Foing, Bernard H.

2016-07-01

The International Lunar Exploration Working Group (ILEWG) was established in April 1995 at a meeting in Hamburg, Germany. As established in its charter, this working group reports to COSPAR and is charged with developing an international strategy for the exploration of the Moon. It discusses coordination between missions, and a road map for future international lunar exploration and utilisation. It fosters information exchange or potential and real future lunar robotic and human missions, as well as for new scientific and exploration information about the Moon. We refer to COSPAR and ILEWG ICEUM and lunar conferences and declarations [1-18], present the GLUC/ICEUM11 declaration and give a report on ongoing relevant ILEWG community activities. ILEWG supported community forums, ILEWG EuroMoonMars field campaigns and technology validation activities, as well as Young Lunar Explorers events, and activities with broad stakeholders. We discuss how lunar missions SMART-1, Kaguya, Chang'E1&2, Chandrayaan-1, LCROSS, LRO, GRAIL, LADEE, Chang'E3 and upcoming missions contribute to lunar exploration objectives & roadmap towards the Moon Village. GLUC/ICEUM11 declaration: "467 International Lunar Explorers, registered delegates from 26 countries, assembled at GLUC Global Lunar Conference including the 11th ILEWG Conference on Exploration and Utilisation of the Moon (ICEUM11) in Beijing. The conference engaged scientists, engineers, enthusiast explorers, agencies and organisations in the discussion of recent results and activities and the review of plans for exploration. Space agencies representatives gave the latest reports on their current lunar activities and programmes. GLUC-ICEUM11 was a truly historical meeting that demonstrated the world-wide interest in lunar exploration, discovery, and science. More than 400 abstracts were accepted for oral and poster presentations in the technical sessions, organised in 32 sessions within 4 symposia: Science and Exploration; Technology and Resource Utilisation; Infrastructure and Human aspects; Moon, Space and Society. The latest technical achievements and results of recent missions (SMART-1, Kaguya, Chang'E1, Chandrayaan-1, LCROSS and LRO) were discussed at a plenary panel and technical sessions, with the Lunar Reconnaissance Orbiter (LRO) still in operation. Chang'E1 has generated many useful results for the community. Four plenary panel sessions were conducted: 1. What are the plans? 2. New mission results; 3. From space stations and robotic precursors to lunar bases; 4. Moon, Space, Society The participants summarised their findings, discussions and recommend o continue efforts by agencies and the community on previous ICEUM recommendations, and the continuation of the ILEWG forum, technical groups activities and pilot projects. 1. Science and exploration - World-wide access to raw and derived (geophysical units) data products using consistent formats and coordinate systems will maximize return on investment. We call to develop and implement plans for generation, validation, and release of these data products. Data should be made available for scientific analysis and supporting the development and planning of future missions - There are still Outstanding Questions: Structure and composition of crust, mantle, and core and implications for the origin and evolution of the Earth-Moon system; Timing, origin, and consequences of late heavy bombardment; Impact processes and regolith evolution; Nature and origin of volatile emplacement; Implications for resource utilization. These questions require international cooperation and sharing of results in order to be answered in a cost-effective manner - Ground truth information on the lunar far side is missing and needed to address many important scientific questions, e.g. with a sample return from South Pole- Aitken Basin - Knowledge of the interior is poor relative to the surface, and is needed to address a number of key questions, e.g. with International Lunar Network for seismometry and other geophysical measurements - Lunar missions will be driven by exploration, resource utilization, and science; we should consider minimum science payload for every mission, e.g., landers and rovers should carry instruments to determine surface composition and mineralogy - It is felt important to have a shared database about previous missions available for free, so as to provide inputs to future missions, including a gap analysis of needed measurements. Highly resolved global data sets are required. Autonomous landing and hazard avoidance will depend on the best topographic map of the Moon, achievable by combining shared data. - New topics such as life sciences, partial gravity processes on the Moon should be followed in relation to future exploration needs. 2. Technologies and resources - A number of robotic missions to the Moon are now undertaken independently by various nations, with a degree of exchange of information and coordination. That should increase towards real cooperation, still allowing areas of competition for keeping the process active, cost-effective and faster. - Lunar landers, pressurized lunar rover projects as presented from Europe, Asia and America are important steps that can create opportunities for international collaboration, within a coordinated village of robotic precursors and assistants to crew missions. - We have to think about development, modernization of existing navigation capabilities, and provision of lunar positioning, navigation and data relay assets to support future robotic and human exploration. New concepts and new methods for transportation have attracted much attention and are of great potential. 3. Infrastructures and human aspects - It is recommended to have technical sessions and activities dealing with different aspects of human adaptation to space environments, the modeling of sub-systems, microbial protection and use of inflatable technologies - While the Moon is the best and next logical step in human exploration, we should make best use of the space stations as stepping stones for exploration and human spaceflight beyond Low Earth Orbit. - Further research is needed on lunar dust aspects in regard to humans and interaction with habitats. We note high interest in CELSS for Moon and Mars bases, and recommend further research and development. - We recommend the development and use of terrestrial analogues research sites and facilities, for technology demonstrations, comparative geology and human performance research, and public engagement. We endorse the proposal of development of a site at La Reunion for international Moon-Mars analogue research. 4. Moon, Space, Society and Young Explorers - We consider that the current legal regime as set out in the Outer Space Treaty and the Moon agreement are satisfactory for current and future missions, but may require further clarification for future exploration. Issues of transparency and security will need to be addressed. - Great things are happening for Young Lunar Explorers, with inspiring missions and hands-on activities as coordinated by ILEWG. Lunar exploration is encouraging students of all ages to pursue higher education. - More possibilities for participatory engagement should be offered to the society for example via interdisciplinary activities with the humanities. - We appreciate the work from COSPAR panel on Exploration PEX that should be shared further. - Continued cooperation should be enforced at all levels. The space community feels strongly that joining the forces of space faring nations to explore the Moon should be seriously implemented, with the views of expanding a Global Robotic Village and building in the long run a Manned International Lunar Base. - We propose that a panel be formed through ILEWG with the help of IAF and Chinese Society of Astronautics in cooperation with space agencies, COSPAR and other stakeholders in order to initiate a permanent International Space Exploration Governance Forum We, the participants of the GLUC-ICEUM11 conference, commit to an enhanced global cooperation towards international lunar exploration for the benefit of humankind. Endorsed by the delegates of GLUC-ICEUM11" References: [1] 1st International Lunar Workshop, Balsiger H. et al., Editors, European Space Agency, 1994. ESA-SP-1170. [2] 2nd International Lunar Workshop, Kyoto, H. Mizutani, editor, Japan Space Forum Publisher, 1997. [3] 3rd International Lunar Workshop, Moscow 1998, E. Galimov, editor. [4] ICEUM4, ESTEC, 2000, ESA SP-462, B.H. Foing & M. Perry, editors. [5] ICEUM5, Hawaii Nov 2003, Durst S.M. et al, Editors, Vol 108, 1-576 pp, Science and Technology Series, American Astronautical Society, 2004. [6] ICEUM6, Udaipur 2004, Bhandari N., Editor, Journal Earth System Science, India, 114, No6, Dec 2005, pp. 573-841. [7] ICEUM7, Toronto Sept 2005, sci.esa.int/ilewg. [8] ICEUM8, Beijing July 2006, Journal of Chinese Society of Astronautics, Vol. 28 Sup., 2007, Ji W., Editor. [9] ICEUM9, Sorrento, Italy, Foing B., Espinasse S., Kosters G., Editors. http://sci.esa.int/iceum9, Dec. 2007), [11] Ehrenfreund, P., Foing, B.H., Cellino, A. Editors, The Moon and Near Earth Objects, ASR Vol 37, 1, 2006. [12] Foing, B.H. et al editors, 'Astronomy and Space Science from the Moon', ASR 14, 6, 1994. [13] Ip W.-H., Foing, B.H., Masson Ph.L., editors, The Moon and Mars, ASR Vol 23, 11, 1999. [14] Foing, B.H. et al, editor, Lunar Exploration, Planetary and Space Science, Vol 50, 14-15, 2002. [15] Foing, B.H., Heather, D. editors, 'Lunar Exploration 2000', ASR Vol 30, Nr 8, 2002. [16] Huntress, W. et al 'The next steps in exploring deep space - A cosmic study by the IAA', Acta Astronautica, Vol 58, Issues 6-7, 2006, p302-377. [17] http://sci.esa.int/ilewg/43654-declaration-iceum10-leag-srr-florida-2008/ [18] Ehrenfreund P. et al (COSPAR planetary exploration panel report) 2012, ASR Vol 49, Nr 1, pp. 2-48.

COED Transactions, Vol. XI, No. 3, March 1979. LSSP: An Educational Aid to the Study of Linear System Dynamics.

ERIC Educational Resources Information Center

Mitchell, Eugene E., Ed.

The study of the dynamics of physical systems is of importance to all engineering students. LSSP, a Linear System Simulation Program, is used to study the behavior of physical phenomena and systems which may be represented to a good degree of approximation by linear models. Emphasis is placed upon the unity resulting from the mathematical…

Oxidation resistant Mo-Mo2B-silica and Mo-Mo2B-silicate composites for high temperature applications

NASA Astrophysics Data System (ADS)

Cochran, J. K.; Daloz, W. L.; Marshall, P. E.

2011-12-01

Development of Mo composites based on the Mo-Si-B system has been demonstrated as a possible new route to achieving a high temperature Mobased material. In this new system, the silicide phases are replaced directly with silica or other silicate materials. These composites avoid the high ductile to brittle transition temperature observed for Mo-Si-B alloys by removing the Si that exists in solid solution in Mo at equilibrium with its silicides. A variety of compositions is tested for room temperature ductility and oxidation resistance. A system based upon Mo, Mo2B, and SrO·Al2O3·(SiO2)2 is shown to possess both ductility at 80 vol.% Mo and oxidation resistance at 60 vol.%. These composites can be produced using a powder processing approach and fired to greater than 95% theoretical density with a desirable microstructure of isolated boride and silicate phases within a ductile Mo matrix.

Applying Clausewitz and Systems Thinking to Design

DTIC Science & Technology

2012-06-01

more open system, like a social-political system, does not respond to some stimulus, say, a stock market fluctuation, in a predictable pattern. The un...demanded maximum efficiency from workers, acquired resources for production, and either captured or developed demand for the product in the market ...Towards a System of Systems Concepts,” Management Science, Vol. 17, No. 11, July 1971, pp. 661-671, Business Source Complete, EBSCOhost . 6. Peter

COED Transactions, Vol. X, No. 1, January 1978. Design and Simulation of an Automobile Guidance Control System.

ERIC Educational Resources Information Center

Stefani, R. T.

This document describes the design of an automatic guidance and control system for a passenger car. A simulation of that system is presented. Analog outputs are provided which compare human operator control to automatic control. One human control possibility is to provide the operator with sufficient feedback information that resulting performance…

Longitudinal Joint Systems in Slip-Formed Rigid Pavements. Volume IV. Recommendations for Alternate Joint Systems and for Strengthening Existing Joints.

DTIC Science & Technology

1981-11-01

34Structural Analysis of Concrete Pavement Systems," Journal, ASCE, Vol. 106, No. TE5, September 1980. 6. Barenberg, E. J., and Arntzen , D. M., "Design of...International Airport," Unpublished Report, Consultant Brandley to SEA-TAC Airport Authority, December 1971. 8. Personal Observation by Author. 9. Arntzen , D

COED Transactions, Vol. X, No. 10, October 1978. Simulation of a Sampled-Data System on a Hybrid Computer.

ERIC Educational Resources Information Center

Mitchell, Eugene E., Ed.

The simulation of a sampled-data system is described that uses a full parallel hybrid computer. The sampled data system simulated illustrates the proportional-integral-derivative (PID) discrete control of a continuous second-order process representing a stirred-tank. The stirred-tank is simulated using continuous analog components, while PID…

System for the Analysis of Global Energy Markets - Vol. I, Model Documentation

EIA Publications

2003-01-01

Documents the objectives and the conceptual and methodological approach used in the development of projections for the International Energy Outlook. The first volume of this report describes the System for the Analysis of Global Energy Markets (SAGE) methodology and provides an in-depth explanation of the equations of the model.

Reliability of Computer Systems ODRA 1305 and R-32,

DTIC Science & Technology

1983-03-25

RELIABILITY OF COMPUTER SYSTEMS ODRA 1305 AND R-32 By: Wit Drewniak English pages: 12 Source: Informatyka , Vol. 14, Nr. 7, 1979, pp. 5-8 Country of...JS EMC computers installed in ZETO, Katowice", Informatyka , No. 7-8/78, deals with various reliability classes * within the family of the machines of

Minimizing Losses in a Space Laser Power Beaming System

DTIC Science & Technology

2010-03-01

system was to inefficient for any practical power transfer applications ( Reiman , 1993:2). Shorter wavelengths are easier to direct and have led to the...OH. Winter Quarter 2009 Reiman , D. "Scanning the Past: A History of Electrical Engineering from the Past." n. pag. IEEE (Vol. 81, No. 6, 1993

A Model of Submarine Emergency Decisionmaking and Decision Aiding

DTIC Science & Technology

1986-10-01

Rationality," Ajiiigm 0 Vl1, No.6, pp. 703-709. [9] Levis, A.H. arid K.L. Boettcher (1983j). "Decisionmaking Organizacions with Acyclical Informafion...and Decision Systems, MIT, Cambridge, MA.4 [18] Labak, SJ. (1985-86). Private Communication. [19] Anonymous, SSN 688 Class Ship Systems Manual , Vol. 7

Nonthermal pasteurization of beer by high pressure processing: modelling the inactivation of saccharomyces cerevisiae ascospores in different alcohol beers

NASA Astrophysics Data System (ADS)

Milani, Elham A.; Silva, Filipa V. M.

2016-10-01

The industrial production of beer ends with a process of thermal pasteurization. In this research, the nonthermal pasteurization of beer by high pressure processing (HPP) was carried out. First, the effect of alcohol content on Saccharomyces cerevisiae ascospore inactivation at 400 MPa was studied. The number of ascospores in 0.0%, 4.8%, and 7.0% alc/vol beers for 10 min processing time decreased by 3.1, 4.9, and ≥ 6.0 log, respectively. The Weibull model fitted the ascospore inactivation by HPP in 0.0%, 4.8%, and 7.0% alc/vol beers. At 400 MPa, 7.2 s could ensure the minimum pasteurization of beers and for 600 MPa 5 s were enough for ≥ 7 log reductions. The overall flavour of HPP vs. untreated beers was evaluated for a lager and an ale, with no significant differences between the untreated and HPP beers. Thus, nonthermal HPP is a feasible technology to pasteurize beer with different alcohol contents without heat.

Environmental effects of energy production and utilization in the U. S. Volume I. Sources, trends, and costs of control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Newkirk, H.W.

1976-05-01

Volume I deals with sources (what the emissions are and where they come from), trends (quantities of emissions and their dispersion with time), and costs of control (what it takes in time, energy, and money to meet minimum standards). Volume II concerns itself with the public health effects of energy production and utilization. Volume III summarizes the various techniques for controlling emissions, technological as well as economic, social, and political. (For abstracts of Vols. II and III, see ERDA Energy Research Abstracts, Vol. 2, Absts. 5764 and 5670, respectively) Each volume is divided into sections dealing with the atmosphere, water,more » land, and social activities--each division indicating a particular sphere of man's environment affected by energy production and use. The sources of information that were used in this study included textbooks, journal articles, technical reports, memoranda, letters, and personal communications. These are cited in the text at the end of each subsection and on the applicable tables and figures.« less

Application of Knowledge-Based Techniques to Tracking Function

DTIC Science & Technology

2006-09-01

38394041 42434445 46474849 505152 53545556 57585960 616263 646566 676869 707172 737475 7677 7879 8081 8283 8485 8687 8889 9091 9293 9495 969798 99100...Knowledge-based applications to adaptive space-time processing. Volume I: Summary”, AFRL-SN-TR-2001-146 Vol. I (of Vol. VI ), Final Technical Report, July...2001-146 Vol. IV (of Vol. VI ), Final Technical Report, July 2001. [53] C. Morgan, L. Moyer, “Knowledge-based applications to adaptive space-time

Distributed Fiber Optic Sensor for Early Detection of Rocky Slopes Movements

NASA Astrophysics Data System (ADS)

Minardo, Aldo; Picarelli, Luciano; Coscetta, Agnese; Zeni, Giovanni; Esposito, Giuseppe; Sacchi, Marco; Matano, Fabio; Caccavale, Mauro; Luigi, Zeni

2014-05-01

Distributed optical fiber sensors have in recent years gained considerable attention in structural and environmental monitoring due to specific advantages that, apart from the classical advantages common to all optical fiber sensors such as immunity to electromagnetic interferences, high sensitivity, small size and possibility to be embedded into the structures, multiplexing and remote interrogation capabilities [1], offer the unique feature of allowing the exploitation of a telecommunication grade optical fiber cable as the sensing element to measure deformation and temperature profiles over very long distances. In particular, distributed optical fiber sensors based on stimulated Brillouin scattering (SBS) through the so-called Brillouin Optical Time Domain Analysis (BOTDA), allow to measure strain and temperature profiles up to tens of kilometers with a strain accuracy of ±10µɛ and a temperature accuracy of ±1°C [2]. They have already been successfully employed in the monitoring of large civil and geotechnical structures such as bridges, tunnels, dams, pipelines allowing to identify and localize any kind of failures that can occur during their construction and operation [3,4]. In this paper we present the application of BOTDA to the monitoring of movements in a rocky slope, showing how the sensing optical fiber cable is able to detect the formation and follow the growth of fractures, and to identify their location along the slope, as well. The experimental results have been achieved on a test field located in the area of Naples (Italy), where a single mode optical fiber sensing cable has been deployed along a yellow tuffs slope, by spot gluing the cable with epoxy adhesive. In order to assess the validity of the proposed approach, a few existing cracks have been artificially enlarged and the magnitude and location of the induced strain peaks have been clearly identified by the sensing device. It should be emphasized that, due to the distributed nature of the sensor, no preliminary information about the possible displacement locations of rocks are required in advance. The sensing cable can be simply deployed in a zig-zag pattern path along the slope, for hundreds of meters, and the system will remotely detect and locate any displacements wherever they occur along the fiber cable path, so representing a powerful tool for early warning against possible rock slides. [1] J. M. López-Higuera, L. R. Cobo, A. Q. Incera, A. Cobo, " Fiber Optic Sensors in Structural Health Monitoring", Journal of Lightwave Technology, Vol. 29, pp.586-608, 2011. [2] A. Minardo, R. Bernini, L. Zeni, "Numerical analysis of single pulse and differential pulse-width pair BOTDA systems in the high spatial resolution regime", Optics Express, vol. 19, pp. 19233-19244, 2011. [3] A. Minardo, R. Bernini, L. Amato, L. Zeni, "Bridge monitoring using Brillouin fiber-optic sensors", IEEE Sensor Journal, Vol. 12 (1), pp. 145-150, 2012. [4] R. Bernini, A. Minardo, S. Ciaramella, V. Minutolo, L. Zeni, "Distributed strain measurement along a concrete beam via stimulated Brillouin scattering in optical fibers", International Journal of Geophysics, Vol. 2011, pp. 1-5, doi:10.1155/2011/710941, 2011.

Human health exposure assessment for Rocky Mountain Arsenal study area evaluations. Volume 6-E. Central study area exposure assessment. Version 4. 1(volume 6-E). Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objectives of the Human Health Exposure Assessment include: (1) estimate the type and magnitude of exposures to contaminants; (2) Identify contaminants of concern; (3) Identify sites for remedial action; (4) Recommend sites for the no action remedial alternative; and (5) Provide a basis for detailed characterization of the risk associated with all sites. This document consists of the following: An executive summary. Vol I - Land use and exposed population evaluations. Vol. II III - Toxicity assessment (includes army and shell toxicity profiles). Vol. IV - PPLV Methodology. Vol. V - PPLV Calculations. Vol. VI - Study area exposuremore » analysis A introduction, B Western study ares, C Southern study area, D northern Central study area, E Central study area, F Eastern study area, G South plants study area, and H North plants study area. Vol. VII - Summary exposure assessment.« less

Study area evaluations. Volume 6-H. North plants study area exposure assessment version 4. 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objectives of the Human Health Exposure Assessment include: (1) estimate the type and magnitude of exposures to contaminants; (2) Identify contaminants of concern; (3) Identify sites for remedial action; (4) Recommend sites for the no action remedial alternative; and (5) Provide a basis for detailed characterization of the risk associated with all sites. This document consists of the following: An executive summary. Vol I - Land use and exposed population evaluations. Vol. II III - Toxicity assessment (includes army and shell toxicity profiles). Vol. IV - PPLV Methodology. Vol. V - PPLV Calculations. Vol. VI - Study area exposuremore » analysis A introduction, B Western study ares, C Southern study area, D northern Central study area, E Central study area, F Eastern study area, G South plants study area, and H North plants study area. Vol. VII - Summary exposure assessment.« less

Human health exposure assessment for Rocky Mountain Arsenal. Volume 7. Summary exposure assessment version 4. 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objectives of the Human Health Exposure Assessment include: (1) estimate the type and magnitude of exposures to contaminants; (2) Identify contaminants of concern; (3) Identify sites for remedial action; (4) Recommend sites for the no action remedial alternative; and (5) Provide a basis for detailed characterization of the risk associated with all sites. This document consists of the following: An executive summary. Vol I - Land use and exposed population evaluations. Vol. II III - Toxicity assessment (includes army and shell toxicity profiles). Vol. IV - PPLV Methodology. Vol. V - PPLV Calculations. Vol. VI - Study area exposuremore » analysis A introduction, B Western study ares, C Southern study area, D northern Central study area, E Central study area, F Eastern study area, G South plants study area, and H North plants study area. Vol. VII - Summary exposure assessment.« less

Human health exposure assessment for Rocky Mountain Arsenal study area evaluations. Volume 6-F. Eastern study area exposure assessment. Version 4. 1(volume 6-F). Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objectives of the Human Health Exposure Assessment include: (1) estimate the type and magnitude of exposures to contaminants; (2) Identify contaminants of concern; (3) Identify sites for remedial action; (4) Recommend sites for the no action remedial alternative; and (5) Provide a basis for detailed characterization of the risk associated with all sites. This document consists of the following: An executive summary. Vol I - Land use and exposed population evaluations. Vol. II III - Toxicity assessment (includes army and shell toxicity profiles). Vol. IV - PPLV Methodology. Vol. V - PPLV Calculations. Vol. VI - Study area exposuremore » analysis A introduction, B Western study ares, C Southern study area, D northern Central study area, E Central study area, F Eastern study area, G South plants study area, and H North plants study area. Vol. VII - Summary exposure assessment.« less

Human health exposure assessment for Rocky Mountain Arsenal. Volume 8. Response to comments on the draft exposure assessment version 4. 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objectives of the Human Health Exposure Assessment include: (1) estimate the type and magnitude of exposures to contaminants; (2) Identify contaminants of concern; (3) Identify sites for remedial action; (4) Recommend sites for the no action remedial alternative; and (5) Provide a basis for detailed characterization of the risk associated with all sites. This document consists of the following: An executive summary. Vol I - Land use and exposed population evaluations. Vol. II III - Toxicity assessment (includes army and shell toxicity profiles). Vol. IV - PPLV Methodology. Vol. V - PPLV Calculations. Vol. VI - Study area exposuremore » analysis A introduction, B Western study ares, C Southern study area, D northern Central study area, E Central study area, F Eastern study area, G South plants study area, and H North plants study area. Vol. VII - Summary exposure assessment.« less

Human health exposure assessment for Rocky Mountain Arsenal. Volume 2-A. Toxicity assessment. Version 4. 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objectives of the Human Health Exposure Assessment include: (1) estimate the type and magnitude of exposures to contaminants; (2) Identify contaminants of concern; (3) Identify sites for remedial action; (4) Recommend sites for the no action remedial alternative; and (5) Provide a basis for detailed characterization of the risk associated with all sites. This document consists of the following: An executive summary. Vol I - Land use and exposed population evaluations. Vol. II III - Toxicity assessment (includes army and shell toxicity profiles). Vol. IV - PPLV Methodology. Vol. V - PPLV Calculations. Vol. VI - Study area exposuremore » analysis a introduction, B Western study ares, C Southern study area, D northern Central study area, E Central study area, F Eastern study area, G South plants study area, and H North plants study area. Vol. VII - Summary exposure assessment.« less

Human health exposure assessment for Rocky Mountain Arsenal. Volume 3. Toxicity assessment version 4. 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objectives of the Human Health Exposure Assessment include: (1) estimate the type and magnitude of exposures to contaminants; (2) Identify contaminants of concern; (3) Identify sites for remedial action; (4) Recommend sites for the no action remedial alternative; and (5) Provide a basis for detailed characterization of the risk associated with all sites. This document consists of the following: An executive summary. Vol I - Land use and exposed population evaluations. Vol. II III - Toxicity assessment (includes army and shell toxicity profiles). Vol. IV - PPLV Methodology. Vol. V - PPLV Calculations. Vol. VI - Study area exposuremore » analysis A introduction, B Western study ares, C Southern study area, D northern Central study area, E Central study area, F Eastern study area, G South plants study area, and H North plants study area. Vol. VII - Summary exposure assessment.« less

Human health exposure assessment for Rocky Mountain Arsenal. Volume 1. Land use and exposed population evaluations version 4. 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objectives of the Human Health Exposure Assessment include: (1) estimate the type and magnitude of exposures to contaminants; (2) Identify contaminants of concern; (3) Identify sites for remedial action; (4) Recommend sites for the no action remedial alternative; and (5) Provide a basis for detailed characterization of the risk associated with all sites. This document consists of the following: An executive summary. Vol I - Land use and exposed population evaluations. Vol. II III - Toxicity assessment (includes army and shell toxicity profiles). Vol. IV - PPLV Methodology. Vol. V - PPLV Calculations. Vol. VI - Study area exposuremore » analysis A introduction, B Western study ares, C Southern study area, D northern Central study area, E Central study area, F Eastern study area, G South plants study area, and H North plants study area. Vol. VII - Summary exposure assessment.« less

Human health exposure assessment for Rocky Mountain Arsenal study area evaluations. Volume 6-C. Southern study area exposure assessment version 4. 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objectives of the Human Health Exposure Assessment include: (1) estimate the type and magnitude of exposures to contaminants; (2) Identify contaminants of concern; (3) Identify sites for remedial action; (4) Recommend sites for the no action remedial alternative; and (5) Provide a basis for detailed characterization of the risk associated with all sites. This document consists of the following: An executive summary. Vol I - Land use and exposed population evaluations. Vol. II III - Toxicity assessment (includes army and shell toxicity profiles). Vol. IV - PPLV Methodology. Vol. V - PPLV Calculations. Vol. VI - Study area exposuremore » analysis A introduction, B Western study ares, C Southern study area, D northern Central study area, E Central study area, F Eastern study area, G South plants study area, and H North plants study area. Vol. VII - Summary exposure assessment.« less

Superpave in-situ stress/strain investigation--phase II : vol. I, summary report.

DOT National Transportation Integrated Search

2009-05-01

The characterization of materials is an intergral part of the overall effort to validate the Superpave system and to calibrate the performance prdeictionmodels for the environmental conditions observed in the Commonwealth of Pennsylvania.

Superpave in-situ stress/strain investigation--phase II : vol. II, materials characterization.

DOT National Transportation Integrated Search

2009-05-01

The characterization of materials is an intergral part of the overall effort to validate the Superpave system and to calibrate the performance prdeictionmodels for the environmental conditions observed in the Commonwealth of Pennsylvania.

Simulation of Biomolecular Nanomechanical Systems

DTIC Science & Technology

2006-10-01

optimization of doping concentration and minimizing the interface traps. Surface Immobilization of Receptors For biomolecular binding experiments...Biosensors,” Langmuir, Vol. 21, pp. 1956-1961 (2005). 13. M. Yue, Multiplexed Label-Free Bioassays Using Nanomechanics and Nanofluidics , PhD Thesis

Motor Carrier Safety Fitness Determination: An Improved Process

DOT National Transportation Integrated Search

1996-12-01

PREFACE This report was undertaken to define an improved process for motor carrier safety fitness determination. It was produced by the Research and Special Program Administration's (RSPA} John A. Volpe National Transportation Systems Center (the Vol...

Insect-Inspired Flight Control for Unmanned Aerial Vehicles

NASA Technical Reports Server (NTRS)

Thakoor, Sarita; Stange, G.; Srinivasan, M.; Chahl, Javaan; Hine, Butler; Zornetzer, Steven

2005-01-01

Flight-control and navigation systems inspired by the structure and function of the visual system and brain of insects have been proposed for a class of developmental miniature robotic aircraft called "biomorphic flyers" described earlier in "Development of Biomorphic Flyers" (NPO-30554), NASA Tech Briefs, Vol. 28, No. 11 (November 2004), page 54. These form a subset of biomorphic explorers, which, as reported in several articles in past issues of NASA Tech Briefs ["Biomorphic Explorers" (NPO-20142), Vol. 22, No. 9 (September 1998), page 71; "Bio-Inspired Engineering of Exploration Systems" (NPO-21142), Vol. 27, No. 5 (May 2003), page 54; and "Cooperative Lander-Surface/Aerial Microflyer Missions for Mars Exploration" (NPO-30286), Vol. 28, No. 5 (May 2004), page 36], are proposed small robots, equipped with microsensors and communication systems, that would incorporate crucial functions of mobility, adaptability, and even cooperative behavior. These functions are inherent to biological organisms but are challenging frontiers for technical systems. Biomorphic flyers could be used on Earth or remote planets to explore otherwise difficult or impossible to reach sites. An example of an exploratory task of search/surveillance functions currently being tested is to obtain high-resolution aerial imagery, using a variety of miniaturized electronic cameras. The control functions to be implemented by the systems in development include holding altitude, avoiding hazards, following terrain, navigation by reference to recognizable terrain features, stabilization of flight, and smooth landing. Flying insects perform these and other functions remarkably well, even though insect brains contains fewer than 10(exp -4) as many neurons as does the human brain. Although most insects have immobile, fixed-focus eyes and lack stereoscopy (and hence cannot perceive depth directly), they utilize a number of ingenious strategies for perceiving, and navigating in, three dimensions. Despite their lack of stereoscopy, insects infer distances to potential obstacles and other objects from image motion cues that result from their own motions in the environment. The concept of motion of texture in images as a source of motion cues is denoted generally as the concept of optic or optical flow. Computationally, a strategy based on optical flow is simpler than is stereoscopy for avoiding hazards and following terrain. Hence, this strategy offers the potential to design vision-based control computing subsystems that would be more compact, would weigh less, and would demand less power than would subsystems of equivalent capability based on a conventional stereoscopic approach.

Biceps brachii muscle oxygenation in electrical muscle stimulation.

PubMed

Muthalib, Makii; Jubeau, Marc; Millet, Guillaume Y; Maffiuletti, Nicola A; Ferrari, Marco; Nosaka, Kazunori

2010-09-01

The purpose of this study was to compare between electrical muscle stimulation (EMS) and maximal voluntary (VOL) isometric contractions of the elbow flexors for changes in biceps brachii muscle oxygenation (tissue oxygenation index, TOI) and haemodynamics (total haemoglobin volume, tHb = oxygenated-Hb + deoxygenated-Hb) determined by near-infrared spectroscopy (NIRS). The biceps brachii muscle of 10 healthy men (23-39 years) was electrically stimulated at high frequency (75 Hz) via surface electrodes to evoke 50 intermittent (4-s contraction, 15-s relaxation) isometric contractions at maximum tolerated current level (EMS session). The contralateral arm performed 50 intermittent (4-s contraction, 15-s relaxation) maximal voluntary isometric contractions (VOL session) in a counterbalanced order separated by 2-3 weeks. Results indicated that although the torque produced during EMS was approximately 50% of VOL (P<0.05), there was no significant difference in the changes in TOI amplitude or TOI slope between EMS and VOL over the 50 contractions. However, the TOI amplitude divided by peak torque was approximately 50% lower for EMS than VOL (P<0.05), which indicates EMS was less efficient than VOL. This seems likely because of the difference in the muscles involved in the force production between conditions. Mean decrease in tHb amplitude during the contraction phases was significantly (P<0.05) greater for EMS than VOL from the 10th contraction onwards, suggesting that the muscle blood volume was lower in EMS than VOL. It is concluded that local oxygen demand of the biceps brachii sampled by NIRS is similar between VOL and EMS.

Mosquito bite anaphylaxis: immunotherapy with whole body extracts.

PubMed

McCormack, D R; Salata, K F; Hershey, J N; Carpenter, G B; Engler, R J

1995-01-01

Adverse reactions to mosquito bites have been recognized for some time. These usually consist of large local swellings and redness, generalized urticaria, angioedema and less easily definable responses such as nausea, dizziness, headaches, and lethargy. We report two patients who experienced systemic anaphylaxis from mosquito bites. Both were skin tested and given immunotherapy using whole body mosquito extracts. Skin testing using whole body mosquito extracts was positive to Aedes aegypti at 1/1,000 weight/volume (wt/vol) in one patient and to Aedes aegypti at 1/100,000 wt/vol, and Culex pipiens at 1/10,000 wt/vol in the other. Skin testing of ten volunteers without a history of adverse reactions to mosquito bites was negative. Immunotherapy using these extracts resulted in resolution of adverse reactions to mosquito bites in one patient and a decrease in reactions in the other. Immunotherapy with whole body mosquito extracts is a viable treatment option that can play a role in patients with mosquito bite-induced anaphylaxis. It may also result in severe side effects and one must determine the benefit versus risks for each individual patient.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Häusler, I., E-mail: ines.haeusler@bam.de; Dörfel, I., E-mail: Ilona.doerfel@bam.de; Peplinski, B., E-mail: Burkhard.peplinski@bam.de

A model system was used to simulate the properties of tribofilms which form during automotive braking. The model system was prepared by ball milling of a blend of 70 vol.% iron oxides, 15 vol.% molybdenum disulfide and 15 vol.% graphite. The resulting mixture was characterized by X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and various transmission electron microscopic (TEM) methods, including energy dispersive X-ray spectroscopy (EDXS), high resolution investigations (HRTEM) with corresponding simulation of the HRTEM images, diffraction methods such as scanning nano-beam electron diffraction (SNBED) and selected area electron diffraction (SAED). It could be shown that the ballmore » milling caused a reduction of the grain size of the initial components to the nanometer range. Sometimes even amorphization or partial break-down of the crystal structure was observed for MoS{sub 2} and graphite. Moreover, chemical reactions lead to a formation of surface coverings of the nanoparticles by amorphous material, molybdenum oxides, and iron sulfates as derived from XPS. - Highlights: • Ball milling of iron oxides, MoS{sub 2}, and graphite to simulate a tribofilm • Increasing coefficient of friction after ball milling of the model blend • Drastically change of the diffraction pattern of the powder mixture • TEM & XPS showed the components of the milled mixture and the process during milling. • MoS{sub 2} and graphite suffered a loss in translation symmetry or became amorphous.« less

Space shuttle/payload interface analysis. Volume 4: Business Risk and Value of Operations in Space (BRAVO). Part 3: Workbook

NASA Technical Reports Server (NTRS)

1974-01-01

A collection of blank worksheets for use on each BRAVO problem to be analyzed is supplied, for the purposes of recording the inputs for the BRAVO analysis, working out the definition of mission equipment, recording inputs to the satellite synthesis computer program, estimating satellite earth station costs, costing terrestrial systems, and cost effectiveness calculations. The group of analysts working BRAVO will normally use a set of worksheets on each problem, however, the workbook pages are of sufficiently good quality that the user can duplicate them, if more worksheet blanks are required than supplied. For Vol. 1, see N74-12493; for Vol. 2, see N74-14530.

Terahertz Imaging of Subjects With Concealed Weapons

DTIC Science & Technology

2006-05-01

pulsed imaging", Advanced Characterization, Therapeutics, and Systems XIV, Proceedings of SPIE, Vol. 5318: 23-33 6. Anthony E. Siegman , Lasers , p667...imagery. Both methods made use of in-house transceivers, consisting of two ultra-stable far-infrared lasers , terahertz heterodyne detection systems...SYSTEM The 1.56THz transceiver system at STL uses two carbon dioxide lasers paired individually with two far-infrared lasers . All four units are

A Distributed Problem-Solving Approach to Rule Induction: Learning in Distributed Artificial Intelligence Systems

DTIC Science & Technology

1990-11-01

Intelligence Systems," in Distributed Artifcial Intelligence , vol. II, L. Gasser and M. Huhns (eds), Pitman, London, 1989, pp. 413-430. Shaw, M. Harrow, B...IDTIC FILE COPY A Distributed Problem-Solving Approach to Rule Induction: Learning in Distributed Artificial Intelligence Systems N Michael I. Shaw...SUBTITLE 5. FUNDING NUMBERS A Distributed Problem-Solving Approach to Rule Induction: Learning in Distributed Artificial Intelligence Systems 6

A strategy to optimize CT pediatric dose with a visual discrimination model

NASA Astrophysics Data System (ADS)

Gutierrez, Daniel; Gudinchet, François; Alamo-Maestre, Leonor T.; Bochud, François O.; Verdun, Francis R.

2008-03-01

Technological developments of computed tomography (CT) have led to a drastic increase of its clinical utilization, creating concerns about patient exposure. To better control dose to patients, we propose a methodology to find an objective compromise between dose and image quality by means of a visual discrimination model. A GE LightSpeed-Ultra scanner was used to perform the acquisitions. A QRM 3D low contrast resolution phantom (QRM - Germany) was scanned using CTDI vol values in the range of 1.7 to 103 mGy. Raw data obtained with the highest CTDI vol were afterwards processed to simulate dose reductions by white noise addition. Noise realism of the simulations was verified by comparing normalized noise power spectra aspect and amplitudes (NNPS) and standard deviation measurements. Patient images were acquired using the Diagnostic Reference Levels (DRL) proposed in Switzerland. Noise reduction was then simulated, as for the QRM phantom, to obtain five different CTDI vol levels, down to 3.0 mGy. Image quality of phantom images was assessed with the Sarnoff JNDmetrix visual discrimination model and compared to an assessment made by means of the ROC methodology, taken as a reference. For patient images a similar approach was taken but using as reference the Visual Grading Analysis (VGA) method. A relationship between Sarnoff JNDmetrix and ROC results was established for low contrast detection in phantom images, demonstrating that the Sarnoff JNDmetrix can be used for qualification of images with highly correlated noise. Patient image qualification showed a threshold of conspicuity loss only for children over 35 kg.

Complex Dynamical Behavior in Hybrid Systems

DTIC Science & Technology

2012-09-29

stability for a class of hybrid dynamical systems via averaging”, Mathematics of Control , Signals, and Systems , vol. 23, no. 4, pp...no. 7, pp. 1636-1649, 2011. J9. A.R. Teel and L. Marconi, `` Stabilization for a class of minimum phase hybrid systems under an average dwell- time ...functions for L2 and input-to-state stability in a class of quantized control systems ”, 50th IEEE Conference on Decision and Control , Dec.

Dose equations for tube current modulation in CT scanning and the interpretation of the associated CTDI{sub vol}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dixon, Robert L.; Boone, John M.

2013-11-15

Purpose: The scanner-reported CTDI{sub vol} for automatic tube current modulation (TCM) has a different physical meaning from the traditional CTDI{sub vol} at constant mA, resulting in the dichotomy “CTDI{sub vol} of the first and second kinds” for which a physical interpretation is sought in hopes of establishing some commonality between the two.Methods: Rigorous equations are derived to describe the accumulated dose distributions for TCM. A comparison with formulae for scanner-reported CTDI{sub vol} clearly identifies the source of their differences. Graphical dose simulations are also provided for a variety of TCM tube current distributions (including constant mA), all having the samemore » scanner-reported CTDI{sub vol}.Results: These convolution equations and simulations show that the local dose at z depends only weakly on the local tube current i(z) due to the strong influence of scatter from all other locations along z, and that the “local CTDI{sub vol}(z)” does not represent a local dose but rather only a relative i(z) ≡ mA(z). TCM is a shift-variant technique to which the CTDI-paradigm does not apply and its application to TCM leads to a CTDI{sub vol} of the second kind which lacks relevance.Conclusions: While the traditional CTDI{sub vol} at constant mA conveys useful information (the peak dose at the center of the scan length), CTDI{sub vol} of the second kind conveys no useful information about the associated TCM dose distribution it purportedly represents and its physical interpretation remains elusive. On the other hand, the total energy absorbed E (“integral dose”) as well as its surrogate DLP remain robust between variable i(z) TCM and constant current i{sub 0} techniques, both depending only on the total mAs = t{sub 0}=i{sub 0} t{sub 0} during the beam-on time t{sub 0}.« less

Superpave in-situ stress/strain investigation--phase II : vol. IV, mechanistic analysis and implementation.

DOT National Transportation Integrated Search

2009-05-01

The characterization of materials is an intergral part of the overall effort to validate the Superpave system and to calibrate the performance prdeictionmodels for the environmental conditions observed in the Commonwealth of Pennsylvania.

NEW DIRECTIONS: VOCS AND BIOSPHERE-ATMOSPHERE FEEDBACKS

EPA Science Inventory

Shallcross and Monks [New Directions: a Role For Isoprene in Biosphere-Climate-Chemistry Feedbacks, Atmospheric Environment, Vol. 34 (2000) pp. 1659-1660] recently summarized the importance of biogenic isoprene in a biosphere-atmosphere system under constant change. In this art...

Integrated Noise Model (INM) version 6.0 technical manual

DOT National Transportation Integrated Search

2002-01-31

The Federal Aviation Administration, Office of Environment and Energy (FAA, AEE-100) has : developed Version 6.0 of the Integrated Noise Model (INM) with support from the John A. Volpe : National Transportation Systems Center, Acoustics Facility (Vol...

Federal Register /Vol. 73, No. 96 / Friday, May 16, 2008 /Notices

DOT National Transportation Integrated Search

2008-05-16

The Office of Space : Commercialization seeks comments on a : plan to transition the installed base of : codeless and semi-codeless Global : Positioning System (GPS) user : equipment to next-generation : equipment utilizing the modernized : civil GPS...

Integrated Noise Model (INM), version 5.1 : technical manual

DOT National Transportation Integrated Search

1997-12-01

The Federal Aviation Administration, Office of Environment and Energy (FAA, AEE-120) : has developed Version 5.1 of the Integrated Noise Model (INM) with support from the : John A. Volpe National Transportation Systems Center, Acoustics Facility (Vol...

Engineering Extreme Hydrophobic and Super Slippery Water Shedding Surfaces

NASA Astrophysics Data System (ADS)

McHale, Glen

2017-04-01

The intrinsic water repellency of a material is fundamentally determined by its surface chemistry, but alone this does not determine the ability of a surface to shed water. Physical factors such as the surface texture/topography, rigidity/flexibility, granularity/porosity combined with the intrinsic wetting properties of the liquid with the surface and whether it is infused by a lubricating liquid are equally important. In this talk I will outline fundamental, but simple, ideas on the topographic enhancement of surface chemistry to create superhydrophobicity, the adhesion of particles to liquid-air interfaces to create liquid marbles, elastocapillarity to create droplet wrapping, and lubricant impregnated surfaces to create completely mobile droplets [1-3]. I will discuss how these ideas have their origins in natural systems and surfaces, such as Lotus leaves, galling aphids and the Nepenthes pitcher plant. I will show how we have applied these concepts to study the wetting of granular systems, such as sand, to understand extreme soil water repellency. I will argue that relaxing the assumption that a solid substrate is fixed in shape and arrangement, can lead to the formation of liquid marbles, whereby a droplet self-coats in a hydrophobic powder/grains. I will show that the concepts of wetting and porosity blur as liquids penetrate into a porous or granular substrate. I will also discuss how lubricant impregnated super slippery surfaces can be used to study a pure constant contact angle mode of droplet evaporation [4]. Finally, I will show dewetting of a surface is not simply a video reversal of wetting [5], and I will give an example of the use of perfect hydrophobicity using the Leidenfrost effect to create a new type of low friction mechanical and hear engine [6]. References: [1] Shirtcliffe, N. J., et al., An introduction to superhydrophobicity. Advances in Colloid and Interface Science, vol. 161, pp.124-138 (2010). [2] McHale, G. & Newton, M. I. Liquid marbles: topical context within soft matter and recent progress. Soft Matter, vol. 11, pp. 2530-2546 (2015). [3] Geraldi, N. R., et al., Capillary origami and superhydrophobic membrane surfaces. Applied Physics Letters, vol. 102, art. 214104 (2013). [4] Guan, J. H. et al., Evaporation of sessile droplets on Slippery Liquid-Infused Porous Surfaces (SLIPS). Langmuir, vol. 31, pp. 11781-11789 (2015). [5] Edwards, A. M. J., et al., Not spreading in reverse: The dewetting of a liquid film into a single drop. Science Advances, vol. 2, art. e1600183-e1600183 (2016). [6] Wells, G. G., et al., A sublimation heat engine. Nature Communications, vol. 6, art. 6390 (2015). Acknowledgement: This work has been financially supported by the UK EPSRC and Reece Innovation Ltd, and developed in collaboration with co-workers at Northumbria, Nottingham Trent, Edinburgh, Swansea and Durham Universities.

Optimisation des trajectoires verticales par la methode de la recherche de l'harmonie =

NASA Astrophysics Data System (ADS)

Ruby, Margaux

Face au rechauffement climatique, les besoins de trouver des solutions pour reduire les emissions de CO2 sont urgentes. L'optimisation des trajectoires est un des moyens pour reduire la consommation de carburant lors d'un vol. Afin de determiner la trajectoire optimale de l'avion, differents algorithmes ont ete developpes. Le but de ces algorithmes est de reduire au maximum le cout total d'un vol d'un avion qui est directement lie a la consommation de carburant et au temps de vol. Un autre parametre, nomme l'indice de cout est considere dans la definition du cout de vol. La consommation de carburant est fournie via des donnees de performances pour chaque phase de vol. Dans le cas de ce memoire, les phases d'un vol complet, soit, une phase de montee, une phase de croisiere et une phase de descente, sont etudies. Des " marches de montee " etaient definies comme des montees de 2 000ft lors de la phase de croisiere sont egalement etudiees. L'algorithme developpe lors de ce memoire est un metaheuristique, nomme la recherche de l'harmonie, qui, concilie deux types de recherches : la recherche locale et la recherche basee sur une population. Cet algorithme se base sur l'observation des musiciens lors d'un concert, ou plus exactement sur la capacite de la musique a trouver sa meilleure harmonie, soit, en termes d'optimisation, le plus bas cout. Differentes donnees d'entrees comme le poids de l'avion, la destination, la vitesse de l'avion initiale et le nombre d'iterations doivent etre, entre autre, fournies a l'algorithme pour qu'il soit capable de determiner la solution optimale qui est definie comme : [Vitesse de montee, Altitude, Vitesse de croisiere, Vitesse de descente]. L'algorithme a ete developpe a l'aide du logiciel MATLAB et teste pour plusieurs destinations et plusieurs poids pour un seul type d'avion. Pour la validation, les resultats obtenus par cet algorithme ont ete compares dans un premier temps aux resultats obtenus suite a une recherche exhaustive qui a utilisee toutes les combinaisons possibles. Cette recherche exhaustive nous a fourni l'optimal global; ainsi, la solution de notre algorithme doit se rapprocher le plus possible de la recherche exhaustive afin de prouver qu'il donne des resultats proche de l'optimal global. Une seconde comparaison a ete effectuee entre les resultats fournis par l'algorithme et ceux du Flight Management System (FMS) qui est un systeme d'avionique situe dans le cockpit de l'avion fournissant la route a suivre afin d'optimiser la trajectoire. Le but est de prouver que l'algorithme de la recherche de l'harmonie donne de meilleurs resultats que l'algorithme implemente dans le FMS.

Five Year Plan for Fiscal Years 1992-1996

DTIC Science & Technology

1991-10-01

for the detection of line sig- nals in visual noise. JQ 1 ...o. Am. Vol 4, No. 12, pgs. 2342-2354. 4) Kersten , D. (1987) Statistical efficiency for...the detection of visual noise. Vision Res. Vol 27, No. 6 pgs. 1029-1040. 5) Legge, G. E., Kersten , D., Burgess, A. E. (1987) Contrast discrimination in...noise. J. Opt. Soc. Am. Vol 4, No. 2, pgs 391-404. 6) Kersten , D. (1984) Spatial summation in visual noise. Vision Res. Vol 24, No. 12, pgs. 1977

Optimization of Fat-Reduced Puff Pastry Using Response Surface Methodology.

PubMed

Silow, Christoph; Zannini, Emanuele; Axel, Claudia; Belz, Markus C E; Arendt, Elke K

2017-02-22

Puff pastry is a high-fat bakery product with fat playing a key role, both during the production process and in the final pastry. In this study, response surface methodology (RSM) was successfully used to evaluate puff pastry quality for the development of a fat-reduced version. The technological parameters modified included the level of roll-in fat, the number of fat layers (50-200) and the final thickness (1.0-3.5 mm) of the laminated dough. Quality characteristics of puff pastry were measured using the Texture Analyzer with an attached Extended Craft Knife (ECK) and Multiple Puncture Probe (MPP), the VolScan and the C-Cell imaging system. The number of fat layers and final dough thickness, in combination with the amount of roll-in fat, had a significant impact on the internal and external structural quality parameters. With technological changes alone, a fat-reduced (≥30%) puff pastry was developed. The qualities of fat-reduced puff pastries were comparable to conventional full-fat (33 wt %) products. A sensory acceptance test revealed no significant differences in taste of fatness or 'liking of mouthfeel'. Additionally, the fat-reduced puff pastry resulted in a significant ( p < 0.05) positive correlation to 'liking of flavor' and overall acceptance by the assessors.

Optimization of Fat-Reduced Puff Pastry Using Response Surface Methodology

PubMed Central

Silow, Christoph; Zannini, Emanuele; Axel, Claudia; Belz, Markus C. E.; Arendt, Elke K.

2017-01-01

Puff pastry is a high-fat bakery product with fat playing a key role, both during the production process and in the final pastry. In this study, response surface methodology (RSM) was successfully used to evaluate puff pastry quality for the development of a fat-reduced version. The technological parameters modified included the level of roll-in fat, the number of fat layers (50–200) and the final thickness (1.0–3.5 mm) of the laminated dough. Quality characteristics of puff pastry were measured using the Texture Analyzer with an attached Extended Craft Knife (ECK) and Multiple Puncture Probe (MPP), the VolScan and the C-Cell imaging system. The number of fat layers and final dough thickness, in combination with the amount of roll-in fat, had a significant impact on the internal and external structural quality parameters. With technological changes alone, a fat-reduced (≥30%) puff pastry was developed. The qualities of fat-reduced puff pastries were comparable to conventional full-fat (33 wt %) products. A sensory acceptance test revealed no significant differences in taste of fatness or ‘liking of mouthfeel’. Additionally, the fat-reduced puff pastry resulted in a significant (p < 0.05) positive correlation to ‘liking of flavor’ and overall acceptance by the assessors. PMID:28231095

Nuclear characteristics of a fissioning uranium plasma test reactor with light-water cooling

NASA Technical Reports Server (NTRS)

Whitmarsh, C. L., Jr.

1973-01-01

An analytical study was performed to determine a design configuration for a cavity test reactor. Test section criteria were that an average flux of 10 to the 15th power neutrons/sq cm/sec (E less than or equal to 0.12 eV) be supplied to a 61-cm-diameter spherical cavity at 200-atm pressure. Design objectives were to minimize required driver power, to use existing fuel-element technology, and to obtain fuel-element life of 10 to 100 full-power hours. Parameter calculations were made on moderator region size and material, driver fuel arrangement, control system, and structure in order to determine a feasible configuration. Although not optimized, a configuration was selected which would meet design criteria. The driver fuel region was a cylindrical annular region, one element thick, of 33 MTR-type H2O-cooled elements (Al-U fuel plate configuration), each 101 cm long. The region between the spherical test cavity and the cylindrical driver fuel region was Be (10 vol. % H2O coolant) with a midplane dimension of 8 cm. Exterior to the driver fuel, the 25-cm-thick cylindrical and axial reflectors were also Be with 10 vol. % H2O coolant. The entire reactor was contained in a 10-cm-thick steel pressure vessel, and the 200-atm cavity pressure was equalized throughout the driver reactor. Fuel-element life was 50 hr at the required driver power of 200 MW. Reactor control would be achieved with rotating poison drums located in the cylindrical reflector region. A control range of about 18 percent delta k/k was required for reactor operation.

Investigation of Current State of Crytpography and Theoretical Implementation of a Cryptographic System for the Combat Service Support Control System.

DTIC Science & Technology

1987-05-01

34 Advances in Crypt g: Proceedings of CRYPTO 84,r o ... .. .. _ __...o ... .. ... ....... ed. by G.R. Blakely and D. Chaum . [Wagn84b] Wagner, Neal R...in Distributed Computer Systems," IEEE Trans. on Computers, Vol. C-35, No. 7, Jul. 86, pp. 583-590. Gifford, David K., "Cryptographic Sealing for

East Europe Report, Political, Sociological and Military Affairs

DTIC Science & Technology

1984-10-03

Vehres; EINHEIT, Vol 39 No 8, Aug 84) 123 YUGOSLAVIA Council Member Discusses Critical Analysis of Political System (Jovan Marjanovic Interview...CRITICAL ANALYSIS OF POLITICAL SYSTEM Zagreb DANAS in Serbo-Croatian 17 Jul 84 pp 11-14 [Interview with Dr Jovan Marjanovic , professor of political...of Political System"] TText] Dr Jovan Marjanovic , professor and member of the Federal Social Council for Social Questions, talks about different

Can The Periods of Some Extra-Solar Planetary Systems be Quantized?

NASA Astrophysics Data System (ADS)

El Fady Morcos, Abd

A simple formula was derived before by Morcos (2013 ), to relate the quantum numbers of planetary systems and their periods. This formula is applicable perfectly for the solar system planets, and some extra-solar planets , of stars of approximately the same masses like the Sun. This formula has been used to estimate the periods of some extra-solar planet of known quantum numbers. The used quantum numbers were calculated previously by other authors. A comparison between the observed and estimated periods, from the given formula has been done. The differences between the observed and calculated periods for the extra-solar systems have been calculated and tabulated. It is found that there is an error of the range of 10% The same formula has been also used to find the quantum numbers, of some known periods, exo-planet. Keywords: Quantization; Periods; Extra-Planetary; Extra-Solar Planet REFERENCES [1] Agnese, A. G. and Festa, R. “Discretization on the Cosmic Scale Inspirred from the Old Quantum Mechanics,” 1998. http://arxiv.org/abs/astro-ph/9807186 [2] Agnese, A. G. and Festa, R. “Discretizing ups-Andro- medae Planetary System,” 1999. http://arxiv.org/abs/astro-ph/9910534. [3] Barnothy, J. M. “The Stability of the Solar Systemand of Small Stellar Systems,” Proceedings of the IAU Sympo-sium 62, Warsaw, 5-8 September 1973, pp. 23-31. [4] Morcos, A.B. , “Confrontation between Quantized Periods of Some Extra-Solar Planetary Systems and Observations”, International Journal of Astronomy and Astrophysics, 2013, 3, 28-32. [5] Nottale, L. “Fractal Space-Time and Microphysics, To-wards a Theory of Scale Relativity,” World Scientific, London, 1994. [6] Nottale , L., “Scale-Relativity and Quantization of Extra- Solar Planetary Systems,” Astronomy & Astrophysics, Vol. 315, 1996, pp. L9-L12 [7] Nottale, L., Schumacher, G. and Gay, J. “Scale-Relativity and Quantization of the Solar Systems,” Astronomy & Astrophysics letters, Vol. 322, 1997, pp. 1018-10 [8]Nottale, L. “Scale-Relativity and Quantization of Exo- planet Orbital Semi-Major Axes,” Astronomy & Astro- physics, Vol. 361, 2000, pp. 379-387.

Alcoholic beverage strength discrimination by taste may have an upper threshold.

PubMed

Lachenmeier, Dirk W; Kanteres, Fotis; Rehm, Jürgen

2014-09-01

Given the association between alcohol consumption and negative health consequences, there is a need for individuals to be aware of their consumption of ethanol, which requires knowledge of serving sizes and alcoholic strength. This study is one of the first to systematically investigate the ability to discriminate alcoholic strength by taste. Nine discrimination tests (total n = 413) according to International Standardization Organization (ISO) 4120 sensory analysis methodology "triangle test" were performed. A perceptible difference was found for vodka in orange juice (0.0 vs. 0.5% vol; 0 vs. 1% vol), pilsner and wheat beer (0.5 vs. 5% vol), and vodka in orange juice (5 vs. 10% vol, 20 vs. 30% vol, and 30 vs. 40% vol). The percentage of the population perceiving a difference between the beverages varied between 36 and 73%. Alcoholic strength (higher vs. lower) was correctly assigned in only 4 of the 7 trials at a significant level, with 30 to 66% of the trial groups assigning the correct strength. For the trials that included beverages above 40% vol (vodka unmixed, 40 vs. 50% vol and vodka in orange juice, 40 vs. 50% vol), testers could neither perceive a difference between the samples nor assign correct alcoholic strength. Discrimination of alcoholic strength by taste was possible to a limited degree in a window of intermediate alcoholic strengths, but not at higher concentrations. This result is especially relevant for drinkers of unlabeled, over-proof unrecorded alcoholic beverages who would potentially ingest more alcohol than if they were to ingest commercial alcohol. Our study provides strong evidence for the strict implementation and enforcement of labeling requirements for all alcoholic beverages to allow informed decision making by consumers. Copyright © 2014 by the Research Society on Alcoholism.

The Science of and Advanced Technology for Cost-Effective Manufacture of High Precision Engineering Products. Volume 4. Thermal Effects on the Accuracy of Numerically Controlled Machine Tools.

DTIC Science & Technology

1985-10-01

83K0385 FINAL REPORT D Vol. 4 00 THERMAL EFFECTS ON THE ACCURACY OF LD NUME" 1ICALLY CONTROLLED MACHINE TOOLS PREPARED BY I Raghunath Venugopal and M...OF NUMERICALLY CONTROLLED MACHINE TOOLS 12 PERSONAL AJ’HOR(S) Venunorial, Raghunath and M. M. Barash 13a TYPE OF REPORT 13b TIME COVERED 14 DATE OF...TOOLS Prepared by Raghunath Venugopal and M. M. Barash Accesion For Unannounced 0 Justification ........................................... October 1085