40 CFR Table 33 to Subpart Uuu of... - Initial Compliance With HAP Emission Limits for Sulfur Recovery Units

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Initial Compliance With HAP Emission Limits for Sulfur Recovery Units 33 Table 33 to Subpart UUU of Part 63 Protection of Environment... Units Pt. 63, Subpt. UUU, Table 33 Table 33 to Subpart UUU of Part 63—Initial Compliance With HAP...

40 CFR Table 33 to Subpart Uuu of... - Initial Compliance With HAP Emission Limits for Sulfur Recovery Units

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 12 2011-07-01 2009-07-01 true Initial Compliance With HAP Emission Limits for Sulfur Recovery Units 33 Table 33 to Subpart UUU of Part 63 Protection of Environment..., Subpt. UUU, Table 33 Table 33 to Subpart UUU of Part 63—Initial Compliance With HAP Emission Limits for...

40 CFR Table 26 to Subpart Uuu of... - Initial Compliance With Inorganic HAP Emission Limits for Catalytic Reforming Units

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Initial Compliance With Inorganic HAP Emission Limits for Catalytic Reforming Units 26 Table 26 to Subpart UUU of Part 63 Protection of... Units Pt. 63, Subpt. UUU, Table 26 Table 26 to Subpart UUU of Part 63—Initial Compliance With Inorganic...

40 CFR Table 19 to Subpart Uuu of... - Initial Compliance With Organic HAP Emission Limits for Catalytic Reforming Units

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 13 2012-07-01 2012-07-01 false Initial Compliance With Organic HAP Emission Limits for Catalytic Reforming Units 19 Table 19 to Subpart UUU of Part 63 Protection of... Sulfur Recovery Units Pt. 63, Subpt. UUU, Table 19 Table 19 to Subpart UUU of Part 63—Initial Compliance...

40 CFR Table 12 to Subpart Uuu of... - Initial Compliance With Organic HAP Emission Limits for Catalytic Cracking Units

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Initial Compliance With Organic HAP Emission Limits for Catalytic Cracking Units 12 Table 12 to Subpart UUU of Part 63 Protection of... Units Pt. 63, Subpt. UUU, Table 12 Table 12 to Subpart UUU of Part 63—Initial Compliance With Organic...

40 CFR Table 33 to Subpart Uuu of... - Initial Compliance With HAP Emission Limits for Sulfur Recovery Units

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 13 2014-07-01 2014-07-01 false Initial Compliance With HAP Emission Limits for Sulfur Recovery Units 33 Table 33 to Subpart UUU of Part 63 Protection of Environment... Units Pt. 63, Subpt. UUU, Table 33 Table 33 to Subpart UUU of Part 63—Initial Compliance With HAP...

40 CFR Table 38 to Subpart Uuu of... - Initial Compliance With Work Practice Standards for HAP Emissions From Bypass Lines

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 12 2011-07-01 2009-07-01 true Initial Compliance With Work Practice Standards for HAP Emissions From Bypass Lines 38 Table 38 to Subpart UUU of Part 63 Protection of... Units Pt. 63, Subpt. UUU, Table 38 Table 38 to Subpart UUU of Part 63—Initial Compliance With Work...

40 CFR Table 26 to Subpart Uuu of... - Initial Compliance With Inorganic HAP Emission Limits for Catalytic Reforming Units

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 13 2012-07-01 2012-07-01 false Initial Compliance With Inorganic HAP Emission Limits for Catalytic Reforming Units 26 Table 26 to Subpart UUU of Part 63 Protection of... Sulfur Recovery Units Pt. 63, Subpt. UUU, Table 26 Table 26 to Subpart UUU of Part 63—Initial Compliance...

40 CFR Table 38 to Subpart Uuu of... - Initial Compliance With Work Practice Standards for HAP Emissions From Bypass Lines

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 13 2012-07-01 2012-07-01 false Initial Compliance With Work Practice Standards for HAP Emissions From Bypass Lines 38 Table 38 to Subpart UUU of Part 63 Protection of... Sulfur Recovery Units Pt. 63, Subpt. UUU, Table 38 Table 38 to Subpart UUU of Part 63—Initial Compliance...

40 CFR Table 26 to Subpart Uuu of... - Initial Compliance With Inorganic HAP Emission Limits for Catalytic Reforming Units

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 13 2014-07-01 2014-07-01 false Initial Compliance With Inorganic HAP Emission Limits for Catalytic Reforming Units 26 Table 26 to Subpart UUU of Part 63 Protection of... Sulfur Recovery Units Pt. 63, Subpt. UUU, Table 26 Table 26 to Subpart UUU of Part 63—Initial Compliance...

40 CFR Table 38 to Subpart Uuu of... - Initial Compliance With Work Practice Standards for HAP Emissions From Bypass Lines

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Initial Compliance With Work Practice Standards for HAP Emissions From Bypass Lines 38 Table 38 to Subpart UUU of Part 63 Protection of... Units Pt. 63, Subpt. UUU, Table 38 Table 38 to Subpart UUU of Part 63—Initial Compliance With Work...

40 CFR Table 33 to Subpart Uuu of... - Initial Compliance With HAP Emission Limits for Sulfur Recovery Units

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Initial Compliance With HAP Emission Limits for Sulfur Recovery Units 33 Table 33 to Subpart UUU of Part 63 Protection of Environment..., Subpt. UUU, Table 33 Table 33 to Subpart UUU of Part 63—Initial Compliance With HAP Emission Limits for...

40 CFR Table 38 to Subpart Uuu of... - Initial Compliance With Work Practice Standards for HAP Emissions From Bypass Lines

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Initial Compliance With Work Practice Standards for HAP Emissions From Bypass Lines 38 Table 38 to Subpart UUU of Part 63 Protection of... Sulfur Recovery Units Pt. 63, Subpt. UUU, Table 38 Table 38 to Subpart UUU of Part 63—Initial Compliance...

40 CFR Table 12 to Subpart Uuu of... - Initial Compliance With Organic HAP Emission Limits for Catalytic Cracking Units

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 13 2014-07-01 2014-07-01 false Initial Compliance With Organic HAP Emission Limits for Catalytic Cracking Units 12 Table 12 to Subpart UUU of Part 63 Protection of... Sulfur Recovery Units Pt. 63, Subpt. UUU, Table 12 Table 12 to Subpart UUU of Part 63—Initial Compliance...

40 CFR Table 26 to Subpart Uuu of... - Initial Compliance With Inorganic HAP Emission Limits for Catalytic Reforming Units

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Initial Compliance With Inorganic HAP Emission Limits for Catalytic Reforming Units 26 Table 26 to Subpart UUU of Part 63 Protection of... Sulfur Recovery Units Pt. 63, Subpt. UUU, Table 26 Table 26 to Subpart UUU of Part 63—Initial Compliance...

40 CFR Table 12 to Subpart Uuu of... - Initial Compliance With Organic HAP Emission Limits for Catalytic Cracking Units

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 13 2012-07-01 2012-07-01 false Initial Compliance With Organic HAP Emission Limits for Catalytic Cracking Units 12 Table 12 to Subpart UUU of Part 63 Protection of... Sulfur Recovery Units Pt. 63, Subpt. UUU, Table 12 Table 12 to Subpart UUU of Part 63—Initial Compliance...

40 CFR Table 19 to Subpart Uuu of... - Initial Compliance With Organic HAP Emission Limits for Catalytic Reforming Units

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Initial Compliance With Organic HAP Emission Limits for Catalytic Reforming Units 19 Table 19 to Subpart UUU of Part 63 Protection of... Sulfur Recovery Units Pt. 63, Subpt. UUU, Table 19 Table 19 to Subpart UUU of Part 63—Initial Compliance...

40 CFR Table 38 to Subpart Uuu of... - Initial Compliance With Work Practice Standards for HAP Emissions From Bypass Lines

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 13 2014-07-01 2014-07-01 false Initial Compliance With Work Practice Standards for HAP Emissions From Bypass Lines 38 Table 38 to Subpart UUU of Part 63 Protection of... Sulfur Recovery Units Pt. 63, Subpt. UUU, Table 38 Table 38 to Subpart UUU of Part 63—Initial Compliance...

40 CFR Table 33 to Subpart Uuu of... - Initial Compliance With HAP Emission Limits for Sulfur Recovery Units

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 13 2012-07-01 2012-07-01 false Initial Compliance With HAP Emission Limits for Sulfur Recovery Units 33 Table 33 to Subpart UUU of Part 63 Protection of Environment... Units Pt. 63, Subpt. UUU, Table 33 Table 33 to Subpart UUU of Part 63—Initial Compliance With HAP...

40 CFR Table 19 to Subpart Uuu of... - Initial Compliance With Organic HAP Emission Limits for Catalytic Reforming Units

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 13 2014-07-01 2014-07-01 false Initial Compliance With Organic HAP Emission Limits for Catalytic Reforming Units 19 Table 19 to Subpart UUU of Part 63 Protection of... Sulfur Recovery Units Pt. 63, Subpt. UUU, Table 19 Table 19 to Subpart UUU of Part 63—Initial Compliance...

40 CFR Table 5 to Subpart Kkkkk of... - Initial Compliance with Emission Limitations and Work Practice Standards

Code of Federal Regulations, 2010 CFR

2010-07-01

... Limitations and Work Practice Standards 5 Table 5 to Subpart KKKKK of Part 63 Protection of Environment... Pollutants for Clay Ceramics Manufacturing Pt. 63, Subpt. KKKKK, Table 5 Table 5 to Subpart KKKKK of Part 63... table: For each . . . For the following . . . You have demonstrated initial compliance if . . . 1. New...

40 CFR Table 5 to Subpart Kkkkk of... - Initial Compliance with Emission Limitations and Work Practice Standards

Code of Federal Regulations, 2011 CFR

2011-07-01

... Limitations and Work Practice Standards 5 Table 5 to Subpart KKKKK of Part 63 Protection of Environment... Pollutants for Clay Ceramics Manufacturing Pt. 63, Subpt. KKKKK, Table 5 Table 5 to Subpart KKKKK of Part 63... table: For each . . . For the following . . . You have demonstrated initial compliance if . . . 1. New...

40 CFR Table 5 to Subpart Kkkkk of... - Initial Compliance with Emission Limitations and Work Practice Standards

Code of Federal Regulations, 2014 CFR

2014-07-01

... Limitations and Work Practice Standards 5 Table 5 to Subpart KKKKK of Part 63 Protection of Environment... Pollutants for Clay Ceramics Manufacturing Pt. 63, Subpt. KKKKK, Table 5 Table 5 to Subpart KKKKK of Part 63... table: For each . . . For the following . . . You have demonstrated initial compliance if . . . 1. New...

40 CFR Table 5 to Subpart Kkkkk of... - Initial Compliance with Emission Limitations and Work Practice Standards

Code of Federal Regulations, 2013 CFR

2013-07-01

... Limitations and Work Practice Standards 5 Table 5 to Subpart KKKKK of Part 63 Protection of Environment... Pollutants for Clay Ceramics Manufacturing Pt. 63, Subpt. KKKKK, Table 5 Table 5 to Subpart KKKKK of Part 63... table: For each . . . For the following . . . You have demonstrated initial compliance if . . . 1. New...

40 CFR Table 5 to Subpart Kkkkk of... - Initial Compliance with Emission Limitations and Work Practice Standards

Code of Federal Regulations, 2012 CFR

2012-07-01

... Limitations and Work Practice Standards 5 Table 5 to Subpart KKKKK of Part 63 Protection of Environment... Pollutants for Clay Ceramics Manufacturing Pt. 63, Subpt. KKKKK, Table 5 Table 5 to Subpart KKKKK of Part 63... table: For each . . . For the following . . . You have demonstrated initial compliance if . . . 1. New...

Does an eye-hand coordination test have added value as part of talent identification in table tennis? A validity and reproducibility study.

PubMed

Faber, Irene R; Oosterveld, Frits G J; Nijhuis-Van der Sanden, Maria W G

2014-01-01

This study investigated the added value, i.e. discriminative and concurrent validity and reproducibility, of an eye-hand coordination test relevant to table tennis as part of talent identification. Forty-three table tennis players (7-12 years) from national (n = 13), regional (n = 11) and local training centres (n = 19) participated. During the eye-hand coordination test, children needed to throw a ball against a vertical positioned table tennis table with one hand and to catch the ball correctly with the other hand as frequently as possible in 30 seconds. Four different test versions were assessed varying the distance to the table (1 or 2 meter) and using a tennis or table tennis ball. 'Within session' reproducibility was estimated for the two attempts of the initial tests and ten youngsters were retested after 4 weeks to estimate 'between sessions' reproducibility. Validity analyses using age as covariate showed that players from the national and regional centres scored significantly higher than players from the local centre in all test versions (p<0.05). The tests at 1 meter demonstrated better discriminative ability than those at 2 meter. While all tests but one had a positive significant association with competition outcome, which were corrected for age influences, the version with a table tennis ball at 1 meter showed the highest association (r = 0.54; p = 0.001). Differences between the first and second attempts were comparable for all test versions (between -8 and +7 repetitions) with ICC's ranging from 0.72 to 0.87. The smallest differences were found for the test with a table tennis ball at 1 meter (between -3 and +3 repetitions). Best test version as part of talent identification appears to be the version with a table tennis ball at 1 meter regarding the psychometric characteristics evaluated. Longitudinal studies are necessary to evaluate the predictive value of this test.

Comparison of Sedentary Behaviors in Office Workers Using Sit-Stand Tables With and Without Semiautomated Position Changes.

PubMed

Barbieri, Dechristian França; Srinivasan, Divya; Mathiassen, Svend Erik; Oliveira, Ana Beatriz

2017-08-01

We compared usage patterns of two different electronically controlled sit-stand tables during a 2-month intervention period among office workers. Office workers spend most of their working time sitting, which is likely detrimental to health. Although the introduction of sit-stand tables has been suggested as an effective intervention to decrease sitting time, limited evidence is available on usage patterns of sit-stand tables and whether patterns are influenced by table configuration. Twelve workers were provided with standard sit-stand tables (nonautomated table group) and 12 with semiautomated sit-stand tables programmed to change table position according to a preset pattern, if the user agreed to the system-generated prompt (semiautomated table group). Table position was monitored continuously for 2 months after introducing the tables, as a proxy for sit-stand behavior. On average, the table was in a "sit" position for 85% of the workday in both groups; this percentage did not change significantly during the 2-month period. Switches in table position from sit to stand were, however, more frequent in the semiautomated table group than in the nonautomated table group (0.65 vs. 0.29 hr -1 ; p = .001). Introducing a semiautomated sit-stand table appeared to be an attractive alternative to a standard sit-stand table, because it led to more posture variation. A semiautomated sit-stand table may effectively contribute to making postures more variable among office workers and thus aid in alleviating negative health effects of extensive sitting.

Quantification of the Effect of Shuttling on Computed Tomography Perfusion Parameters by Investigation of Aortic Inputs on Different Table Positions From Shuttle-Mode Scans of Lung and Liver Tumors.

PubMed

Ghosh, Payel; Chandler, Adam G; Hobbs, Brian P; Sun, Jia; Rong, John; Hong, David; Subbiah, Vivek; Janku, Filip; Naing, Aung; Hwu, Wen-Jen; Ng, Chaan S

The aim of this study was to quantify the effect of shuttling on computed tomography perfusion (CTp) parameters derived from shuttle-mode body CT images using aortic inputs from different table positions. Axial shuttle-mode CT scans were acquired from 6 patients (10 phases, 2 nonoverlapping table positions 1.4 seconds apart) after contrast agent administration. Artifacts resulting from the shuttling motion were corrected with nonrigid registration before computing CTp maps from 4 aortic levels chosen from the most superior and inferior slices of each table position scan. The effect of shuttling on CTp parameters was estimated by mean differences in mappings obtained from aortic inputs in different table positions. Shuttling effect was also quantified using 95% limits of agreement of CTp parameter differences within-table and between-table aortic positions from the interaortic mean CTp values. Blood flow, permeability surface, and hepatic arterial fraction differences were insignificant (P > 0.05) for both within-table and between-table comparisons. The 95% limits of agreement for within-table blood volume (BV) value deviations obtained from lung tumor regions were less than 4.7% (P = 0.18) compared with less than 12.2% (P = 0.003) for between-table BV value deviations. The 95% limits of agreement of within-table deviations for liver tumor regions were less than 1.9% (P = 0.55) for BV and less than 3.2% (P = 0.23) for mean transit time, whereas between-table BV and mean transit time deviations were less than 11.7% (P < 0.01) and less than 14.6% (P < 0.01), respectively. Values for normal liver tissue regions were concordant. Computed tomography perfusion parameters acquired from aortic levels within-table positions generally yielded higher agreement than mappings obtained from aortic levels between-table positions indicating differences due to shuttling effect.

40 CFR Table 3 to Subpart Cccc of... - Initial Compliance With Emission Limitations

Code of Federal Regulations, 2014 CFR

2014-07-01

... Yeast Pt. 63, Subpart CCCC, Table 3 Table 3 to Subpart CCCC of Part 63—Initial Compliance With Emission... demonstrated initial compliance if . . . 1. Each fed-batch fermenter producing yeast in a fermentation stage... yeast in a fermentation stage (last (Trade), second-to-last (First Generation), or third-to-last (Stock...

40 CFR Table 3 to Subpart Cccc of... - Initial Compliance With Emission Limitations

Code of Federal Regulations, 2012 CFR

2012-07-01

... Yeast Pt. 63, Subpart CCCC, Table 3 Table 3 to Subpart CCCC of Part 63—Initial Compliance With Emission... demonstrated initial compliance if . . . 1. Each fed-batch fermenter producing yeast in a fermentation stage... yeast in a fermentation stage (last (Trade), second-to-last (First Generation), or third-to-last (Stock...

40 CFR Table 3 to Subpart Cccc of... - Initial Compliance With Emission Limitations

Code of Federal Regulations, 2013 CFR

2013-07-01

... Yeast Pt. 63, Subpart CCCC, Table 3 Table 3 to Subpart CCCC of Part 63—Initial Compliance With Emission... demonstrated initial compliance if . . . 1. Each fed-batch fermenter producing yeast in a fermentation stage... yeast in a fermentation stage (last (Trade), second-to-last (First Generation), or third-to-last (Stock...

40 CFR Table 42 to Subpart Uuu of... - Additional Information for Initial Notification of Compliance Status

Code of Federal Regulations, 2010 CFR

2010-07-01

... Notification of Compliance Status 42 Table 42 to Subpart UUU of Part 63 Protection of Environment ENVIRONMENTAL... Refineries: Catalytic Cracking Units, Catalytic Reforming Units, and Sulfur Recovery Units Pt. 63, Subpt. UUU, Table 42 Table 42 to Subpart UUU of Part 63—Additional Information for Initial Notification of...

40 CFR Table 42 to Subpart Uuu of... - Additional Information for Initial Notification of Compliance Status

Code of Federal Regulations, 2011 CFR

2011-07-01

... Notification of Compliance Status 42 Table 42 to Subpart UUU of Part 63 Protection of Environment ENVIRONMENTAL... Refineries: Catalytic Cracking Units, Catalytic Reforming Units, and Sulfur Recovery Units Pt. 63, Subpt. UUU, Table 42 Table 42 to Subpart UUU of Part 63—Additional Information for Initial Notification of...

Cervical spine motion in manual versus Jackson table turning methods in a cadaveric global instability model.

PubMed

DiPaola, Matthew J; DiPaola, Christian P; Conrad, Bryan P; Horodyski, MaryBeth; Del Rossi, Gianluca; Sawers, Andrew; Bloch, David; Rechtine, Glenn R

2008-06-01

A study of spine biomechanics in a cadaver model. To quantify motion in multiple axes created by transfer methods from stretcher to operating table in the prone position in a cervical global instability model. Patients with an unstable cervical spine remain at high risk for further secondary injury until their spine is adequately surgically stabilized. Previous studies have revealed that collars have significant, but limited benefit in preventing cervical motion when manually transferring patients. The literature proposes multiple methods of patient transfer, although no one method has been universally adopted. To date, no study has effectively evaluated the relationship between spine motion and various patient transfer methods to an operating room table for prone positioning. A global instability was surgically created at C5-6 in 4 fresh cadavers with no history of spine pathology. All cadavers were tested both with and without a rigid cervical collar in the intact and unstable state. Three headrest permutations were evaluated Mayfield (SM USA Inc), Prone View (Dupaco, Oceanside, CA), and Foam Pillow (OSI, Union City, CA). A trained group of medical staff performed each of 2 transfer methods: the "manual" and the "Jackson table" transfer. The manual technique entailed performing a standard rotation of the supine patient on a stretcher to the prone position on the operating room table with in-line manual cervical stabilization. The "Jackson" technique involved sliding the supine patient to the Jackson table (OSI, Union City, CA) with manual in-line cervical stabilization, securing them to the table, then initiating the table's lock and turn mechanism and rotating them into a prone position. An electromagnetic tracking device captured angular motion between the C5 and C6 vertebral segments. Repeated measures statistical analysis was performed to evaluate the following conditions: collar use (2 levels), headrest (3 levels), and turning technique (2 levels). For all measures, there was significantly more cervical spine motion during manual prone positioning compared with using the Jackson table. The use of a collar provided a slight reduction in motion in all the planes of movement; however, this was only significantly different from the no collar condition in axial rotation. Differences in gross motion between the headrest type were observed in lateral bending (Foam Pillow

Environmental Regulatory Update Table, January/February 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Bock, R.E.

1995-03-01

The Environmental Regulatory Update Table provides information on regulatory initiatives impacting environmental, health, and safety management responsibilities. the table is updated bi-monthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

50 CFR Table 32 to Part 679 - Amendment 80 Initial QS Pool

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Amendment 80 Initial QS Pool 32 Table 32 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED) FISHERIES OF THE EXCLUSIVE ECONOMIC ZONE OFF ALASKA Pt. 679, Table 32 Table 32 to Part 679—...

40 CFR Table 7 to Subpart Eeee of... - Initial Compliance With Work Practice Standards

Code of Federal Regulations, 2014 CFR

2014-07-01

... equivalent control that meets the requirements in Table 4 to this subpart, item 1.a i. After emptying and... out a leak detection and repair program or equivalent control according to one of the subparts listed... (Non-Gasoline) Pt. 63, Subpt. EEEE, Table 7 Table 7 to Subpart EEEE of Part 63—Initial Compliance With...

40 CFR Table 7 to Subpart Eeee of... - Initial Compliance With Work Practice Standards

Code of Federal Regulations, 2012 CFR

2012-07-01

... equivalent control that meets the requirements in Table 4 to this subpart, item 1.a i. After emptying and... out a leak detection and repair program or equivalent control according to one of the subparts listed... (Non-Gasoline) Pt. 63, Subpt. EEEE, Table 7 Table 7 to Subpart EEEE of Part 63—Initial Compliance With...

40 CFR Table 7 to Subpart Eeee of... - Initial Compliance With Work Practice Standards

Code of Federal Regulations, 2013 CFR

2013-07-01

... equivalent control that meets the requirements in Table 4 to this subpart, item 1.a i. After emptying and... out a leak detection and repair program or equivalent control according to one of the subparts listed... (Non-Gasoline) Pt. 63, Subpt. EEEE, Table 7 Table 7 to Subpart EEEE of Part 63—Initial Compliance With...

40 CFR Table 42 to Subpart Uuu of... - Additional Information for Initial Notification of Compliance Status

Code of Federal Regulations, 2013 CFR

2013-07-01

... Notification of Compliance Status 42 Table 42 to Subpart UUU of Part 63 Protection of Environment ENVIRONMENTAL..., Subpt. UUU, Table 42 Table 42 to Subpart UUU of Part 63—Additional Information for Initial Notification... source or vent associated with an affected source not subject to the requirements of subpart UUU. 2...

40 CFR Table 42 to Subpart Uuu of... - Additional Information for Initial Notification of Compliance Status

Code of Federal Regulations, 2012 CFR

2012-07-01

... Notification of Compliance Status 42 Table 42 to Subpart UUU of Part 63 Protection of Environment ENVIRONMENTAL..., Subpt. UUU, Table 42 Table 42 to Subpart UUU of Part 63—Additional Information for Initial Notification... source or vent associated with an affected source not subject to the requirements of subpart UUU. 2...

40 CFR Table 42 to Subpart Uuu of... - Additional Information for Initial Notification of Compliance Status

Code of Federal Regulations, 2014 CFR

2014-07-01

... Notification of Compliance Status 42 Table 42 to Subpart UUU of Part 63 Protection of Environment ENVIRONMENTAL..., Subpt. UUU, Table 42 Table 42 to Subpart UUU of Part 63—Additional Information for Initial Notification... source or vent associated with an affected source not subject to the requirements of subpart UUU. 2...

Does an Eye-Hand Coordination Test Have Added Value as Part of Talent Identification in Table Tennis? A Validity and Reproducibility Study

PubMed Central

Faber, Irene R.; Oosterveld, Frits G. J.; Nijhuis-Van der Sanden, Maria W. G.

2014-01-01

This study investigated the added value, i.e. discriminative and concurrent validity and reproducibility, of an eye-hand coordination test relevant to table tennis as part of talent identification. Forty-three table tennis players (7–12 years) from national (n = 13), regional (n = 11) and local training centres (n = 19) participated. During the eye-hand coordination test, children needed to throw a ball against a vertical positioned table tennis table with one hand and to catch the ball correctly with the other hand as frequently as possible in 30 seconds. Four different test versions were assessed varying the distance to the table (1 or 2 meter) and using a tennis or table tennis ball. ‘Within session’ reproducibility was estimated for the two attempts of the initial tests and ten youngsters were retested after 4 weeks to estimate ‘between sessions’ reproducibility. Validity analyses using age as covariate showed that players from the national and regional centres scored significantly higher than players from the local centre in all test versions (p<0.05). The tests at 1 meter demonstrated better discriminative ability than those at 2 meter. While all tests but one had a positive significant association with competition outcome, which were corrected for age influences, the version with a table tennis ball at 1 meter showed the highest association (r = 0.54; p = 0.001). Differences between the first and second attempts were comparable for all test versions (between −8 and +7 repetitions) with ICC's ranging from 0.72 to 0.87. The smallest differences were found for the test with a table tennis ball at 1 meter (between −3 and +3 repetitions). Best test version as part of talent identification appears to be the version with a table tennis ball at 1 meter regarding the psychometric characteristics evaluated. Longitudinal studies are necessary to evaluate the predictive value of this test. PMID:24465638

Environmental Regulatory Update Table, October 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1991-11-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, December 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1992-01-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, January--February 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1993-03-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated bi-monthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental regulatory update table, March--April 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Bock, R.E.

1994-03-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated bi-monthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental regulatory update table, September--October 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Lewis, E.B.

1992-11-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated bi-monthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, September/October 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1993-11-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operation and contractor staff with environmental management responsibilities. The table is updated bi-monthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, January--February 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1994-03-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations ad contractor staff with environmental management responsibilities. The table is updated bi-monthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental regulatory update table November--December 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Bock, R.E.

1995-01-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated bi-monthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, November--December 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Lewis, E.B.

1993-01-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated bi-monthly wit information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, July--August 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Lewis, E.B.

1992-09-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated bi-monthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, September 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1991-10-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table July/August 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1993-09-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated bi-monthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, August 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M., Hawkins, G.T.; Salk, M.S.

1991-09-01

This Environmental Regulatory Update Table (August 1991) provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, November 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1991-12-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, March/April 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1993-05-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated bimonthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental regulatory update table, July/August 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Bock, R.E.

1994-09-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated bi-monthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, March/April 1993. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1993-05-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated bimonthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, May/June 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1993-07-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated bimonthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Environmental Regulatory Update Table, May--June 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Bock, R.E.

1994-07-01

The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated bimonthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

Breaking the Cycle of Inequitable School Discipline through Community and Civic Collaboration in Nashville

ERIC Educational Resources Information Center

Majors, Tony; Ward, Tom

2015-01-01

Tom Ward and Tony Majors, community and district lead partners in Nashville, Tennessee, talk about what the Positive and Safe Schools Advancing Greater Equity (PASSAGE) initiative has meant in their city. They share how and why their journey began by embedding the work to end discipline disparities across a broad, cross-sector table that includes…

Validating a topographically driven model of peatland water table: Implications for understanding land cover controls on water table.

NASA Astrophysics Data System (ADS)

Evans, Martin; Allott, Tim; Worrall, Fred; Rowson, James; Maskill, Rachael

2014-05-01

Water table is arguably the dominant control on biogeochemical cycling in peatland systems. Local water tables are controlled by peat surface water balance and lateral transfer of water driven by slope can be a significant component of this balance. In particular, blanket peatlands typically have relatively high surface slope compared to other peatland types so that there is the potential for water table to be significantly contolled by topographic context. UK blanket peatlands are also significantly eroded so that there is the potential for additional topographic drainage of the peatland surface. This paper presents a topographically driven model of blanket peat water table. An initial model presented in Allott et al. (2009) has been refined and tested against further water table data collected across the Bleaklow and Kinderscout plateaux of the English Peak District. The water table model quantifies the impact of peat erosion on water table throughout this dramatically dissected landscape demonstrating that almost 50% of the landscape has suffered significant water table drawdown. The model calibrates the impact of slope and degree of dissection on local water tables but does not incorporate any effects of surface cover on water table conditions. Consequently significant outliers in the test data are potentially indicative of important impacts of surface cover on water table conditions. In the test data presented here sites associated with regular moorland burning are significant outliers. The data currently available do not allow us to draw conclusions around the impact of land cover but they indicate an important potential application of the validated model in controlling for topographic position in further testing of the impact of land cover on peatland water tables. Allott, T.E.H. & Evans, M.G., Lindsay, J.B., Agnew, C.T., Freer, J.E., Jones, A. & Parnell, M. Water tables in Peak District blanket peatlands. Moors for the Future Report No. 17. Moors for the Future Partnership, Edale, 47pp.

Soil Water and Shallow Groundwater Relations in an Agricultural Hillslope

NASA Astrophysics Data System (ADS)

Logsdon, S. D.; Schilling, K. E.

2007-12-01

Shallow water tables contribute to soil water variations under rolling topography, and soil properties contribute to shallow water table fluctutations. Preferential flow through large soil pores can cause a rise in the water table with little increase in soil water except near the soil surface. Lateral groundwater flow can cause a large rise in water table at toeslope and depressional landscape positions. As plants transpire, water can move up into the root zone from the water table and wet soil below the root zone. Roots can utilize water in the capillary fringe. The purpose of this study was to interface automated measurements of soil water content and water table depth for determining the importance of drainage and upward movement. In 2006 soil water and water table depth were monitored at three positions: shoulder, backslope, and toeslope. Neutron access tubes were manually monitored to 2.3 m depth, and automated soil moisture was measured using CS616 probes installed at 0.3, 0.5, 0.7, and 0.9 m depth. Water table depths were monitored manually and automated, but the automated measurements failed during the season at two sites. In 2007, similar measurements were made at one toeslope position, but the CS616 probes were installed at nine depths and better quality automated well depth equipment was used. The 2006 data revealed little landscape position effect on daytime soil water loss on a wetter date; however, on a dry day just before a rain, daytime water loss was greatest for the toeslope positon and least for the shoulder position. After a period of intense rain, a rapid and significant water table rise occurred at the toeslope position but little water table rise occurred at the other landscape positions. The rapid toeslope water table rise was likely caused by lateral groundwater flow whereas minor water table rise at the other positions was likely due to preferential flow since the soil had not wet up below 0.6 m. Use of automated equipment has improved our understanding of the relations of soil water to water table fluctuations in an agricultural field.

Engagement in Care During Active Duty HIV Treatment

DTIC Science & Technology

2017-06-01

3. Estimated Survival Function of Untreated Individuals ..............................34 Table 4. Estimated Survival Function for Treatment Group 1...an individual has tested positive for HIV, that the service member be counseled as soon as possible. A health evaluation is done upon the initial...mandating counseling for the patient’s sexual partners, and evaluating any risks of exposure for other individuals the patient may have come into

Summary of Part 75 Administrative Processes: Table 1

EPA Pesticide Factsheets

Learn how to submit your initial certification, recertification, monitoring plans, routine quality assurance tests, diagnostic tests and DAHS verifications, low mass emissions units and other notification requirements. Table 1, initial certification.

Competition Field Perceptions of Table-tennis Athletes and their Performance

PubMed Central

Liu, Ying-Chieh; Wang, Ming-Yueh; Hsu, Chi-Yueh

2018-01-01

Abstract The distinction between positive and negative perceptions is fundamental in perception models. The purpose of this study was to investigate the correlation between field perceptions of table tennis players and the outcome (net result) during the matches in a competition. Experimental data were collected from 10 elite table tennis players and analysed. The results addressed the following three competition field perceptions: (1) before the service, the player’s positive perceptions had significant effect on the positive outcome (winning rate) of that service; (2) the perception after the net result of the previous service increased the positive outcome of the next service, and (3) the player’s positive/negative perception during the matches affected the win/loss outcome of that competition. In conclusion, the player’s positive perceptions enhanced their winning rate during table tennis competitions. Therefore, during the training program, coaches need to develop positive perceptions and strengthen the psychological quality of table tennis players. PMID:29599876

Touch the table before the target: contact with an underlying surface may assist the development of precise visually controlled reach and grasp movements in human infants.

PubMed

Karl, Jenni M; Wilson, Alexis M; Bertoli, Marisa E; Shubear, Noor S

2018-05-24

Multiple motor channel theory posits that skilled hand movements arise from the coordinated activation of separable neural circuits in parietofrontal cortex, each of which produces a distinct movement and responds to different sensory inputs. Prehension, the act of reaching to grasp an object, consists of at least two movements: a reach movement that transports the hand to a target location and a grasp movement that shapes and closes the hand for target acquisition. During early development, discrete pre-reach and pre-grasp movements are refined based on proprioceptive and tactile feedback, but are gradually coordinated together into a singular hand preshaping movement under feedforward visual control. The neural and behavioural factors that enable this transition are currently unknown. In an attempt to identify such factors, the present descriptive study used frame-by-frame video analysis to examine 9-, 12-, and 15-month-old infants, along with sighted and unsighted adults, as they reached to grasp small ring-shaped pieces of cereal (Cheerios) resting on a table. Compared to sighted adults, infants and unsighted adults were more likely to make initial contact with the underlying table before they contacted the target. The way in which they did so was also similar in that they generally contacted the table with the tip of the thumb and/or pinky finger, a relatively open hand, and poor reach accuracy. Despite this, infants were similar to sighted adults in that they tended to use a pincer digit, defined as the tip of the thumb or index finger, to subsequently contact the target. Only in infants was this ability related to their having made prior contact with the underlying table. The results are discussed in relation to the idea that initial contact with an underlying table or surface may assist infants in learning to use feedforward visual control to direct their digits towards a precise visual target.

VizieR Online Data Catalog: Stellar yields and the initial mass function (Molla+, 2015)

NASA Astrophysics Data System (ADS)

Molla, M.; Cavichia, O.; Gavilan, M.; Gibson, B. K.

2017-10-01

These tables give the theoretical chemical evolution models applied for the Milky Way Galaxy (MWG) from the cited paper. Basically give tables 2, 4 of stellar yields used and results of table 6 for the 144 models computed that work. Tables 2 and 4 give the stellar yields q_i(m) and remmnant mass for low and intermediate stars and massive stars, respectively, in a similar format for all authors. Table 6 gives the value of Chi2 for the 144 models computed for MWG using those stellar yields and different Initial Mass Function (see paper). Moreover, we give the table with results of the present time state of the Galactic disk for these 144 models. (12 data files).

Alignment of the Korsch type off-axis 3 mirror optical system using sensitivity table method

NASA Astrophysics Data System (ADS)

Lee, Kyoungmuk; Kim, Youngsoo; Hong, Jinsuk; Kim, Sug-Whan; Lee, Haeng-Bok; Choi, Se-Chol

2018-05-01

The optical system of the entire mechanical and optical components consist of all silicon carbide (SiC) is designed, manufactured and aligned. The Korsch type Cassegrain optical system has 3-mirrors, the primary mirror (M1), the secondary mirror (M2), the folding mirror (FM) and the tertiary mirror (M3). To assemble the M3 and the FM to the rear side of the M1 bench, the optical axis of the M3 is 65.56 mm off from the physical center. Due to the limitation of the mass budget, the M3 is truncated excluding its optical axis. The M2 was assigned to the coma compensator and the M3 the astigmatism respectively as per the result of the sensitivity analysis. Despite of the difficulty of placing these optical components in their initial position within the mechanical tolerance, the initial wave front error (WFE) performance is as large as 171.4 nm RMS. After the initial alignment, the sensitivity table method is used to reach the goal of WFE 63.3 nm RMS in all fields. We finished the alignment with the final WFE performance in all fields are as large as 55.18 nm RMS.

Integrating Residual Stress Analysis of Critical Fastener Holes into USAF Depot Maintenance

DTIC Science & Technology

2014-11-02

40 Table 15. Metrology of the initial reamer, initial hole diameters, and resulting CX for the class/type hole combinations for Pattern 1...70 Table 16. Metrology of the initial reamer, initial hole diameters, and resulting...step in the cold work process. These procedures produce a digital documentation of the hole, based on critical metrology , which can be linked with

[Paresthesia and spinal anesthesia for cesarean section: comparison of patient positioning].

PubMed

Palacio Abizanda, F J; Reina, M A; Fornet, I; López, A; López López, M A; Morillas Sendín, P

2009-01-01

To determine the incidence of paresthesia during lumbar puncture performed with the patient in different positions. A single-blind prospective study of patients scheduled for elective cesarean section, randomized to 3 groups. In group 1 patients were seated in the direction of the long axis of the table, with heels resting on the table. In group 2 they were seated perpendicular to the long axis of the table, with legs hanging from the table. In group 3 they were in left lateral decubitus position. Lumbar punctures were performed with a 27-gauge Whitacre needle. One hundred sixty-eight patients (56 per group) were enrolled. Paresthesia occurred most often in group 3 (P = .009). We observed no differences in blood pressure after patients moved from decubitus position to the assigned position. Nor did we observe between-group differences in blood pressure according to position taken during puncture. Puncture undertaken with the patient seated, heels on the table and knees slightly bent, is associated with a lower incidence of paresthesia than puncture performed with the patient seated, legs hanging from the table. Placing the patient's heels on the table requires hip flexion and leads to anterior displacement of nerve roots in the dural sac. Such displacement would increase the nerve-free zone on the posterior side of the sac, thereby decreasing the likelihood of paresthesia during lumbar puncture. A left lateral decubitus position would increase the likelihood of paresthesia, possibly because the anesthetist may inadvertently not follow the medial line when inserting the needle.

UNICEF's child injury league table. An analysis of legislation: more mixed messages.

PubMed

Towner, E; Towner, J

2002-06-01

This paper presents a summary table and discussion of legislation related to child injury prevention in member countries of the Organisation for Economic Cooperation and Development. The table is an expanded version of the one which appeared in the UNICEF Report Card "Child Deaths by Injury in Rich Countries" (2001). A commentary is provided on the variations in legislation between countries in terms of range and form of measures and an estimate of degree of enforcement. As legislation is generally considered a powerful tool in injury prevention, the paper examines whether those countries with the widest range of legislation and the strongest enforcement have made the most progress in reducing child injury deaths since the 1970s. It also considers whether a commitment to extensive legislation is reflected in a country's position in the UNICEF league table of injury death. The initial conclusion to these two basic issues is that no clear picture can be seen and we thus need to know far more about the relationship between legislation and societies and cultures as they vary from place to place. This paper hopes to stimulate more widespread debate about the role of legislation in different countries.

Computer Simulation of Ejection Seat Performance and Preliminary Correlation with Empirical Data

DTIC Science & Technology

1980-04-01

L. . .. . 3 I r AFFDL-TR-79-31 50 TABLE OF CONTENTS SECTION PAGE I INTRODUCTION 1 1I SAFEST COMPUTER PROGRAM DESCRIPTION 8 III HITECH ...ZEARTH vs TIME 49E-I1A 53 34 ZEARTH vs XEARTH 49E-IIA 54 AFFDL-TR-79-3150 LIST OF TABLES TABLE PAGE 1 ACES II EVENT-TIME SEQUENCE 3 2 HITECH 49E-JlF...Initial Conditions 13 3 HITECH 49E-I1A Initial Conditions 14 4 HITECH Program Test Data Summary 15 5 SAFEST 49E-JIF Initial Conditions 20 6 SAFEST 49E-IIA

[The law on abortion: a chronology of events and positions taken].

PubMed

Devreux, A; Ferrand-picard, M

1982-01-01

A detailed chronology is provided of events, social movements, and legislative actions taken from the initiation of debate on the liberatlization of abortion legislation in 1970 to the enaction of the permanent law in January 1980. The table is accompanied by a brief text which provides background on the alterations in public perceptions of abortion which preceded efforts to liberalize the abortion laws. Another set of tables refers to the hearings held by the Commission of Cultural, Familial, and Social Affairs of the National Assembly in 1974, at which 154 individuals and representatives of interested organizations aired their views. The tables identify the areas of expertise of the individuals and organizations, the pages in the published report covering their remarks, and the number of speakers representing each medical, juridical, religious, and other organization. A separate table presents the same information for organizations and associations concerning women, the family, procreation, and contraception, while the following table concerns the contents of the 77 pages devoted to "respect for life" organizations. The final table identifies the professions and the pages in the corresponding report of the 15 speakers who represented medical organizations, 11 who represented associations of marriage counselors, family planning workers, and other groups, 7 who represented religious groups, 5 from public agencies, 2 from the National Institute for Demographic Studies, and 2 physicians speaking on their own account at the 1979 hearings to determine whether the law enacted in 1975 should be amended or made permanent.

Predicting Stand and Stock Tables from a Spacing Study in Naturally Regenerated Longleaf Pine

Treesearch

Robert M. Farrar

1985-01-01

A prediction system is presented whereby stand and stock tables are calculated for young natural longleaf pine stands of varying initial density. Tables can be output for stand conditions of 10 to 20 years of age, 300 to 1,500 initial trees per acre (at age lo), and 70 to 80 feet in site index (index age 50). The system also allows one to translate from density...

Positioning and Microvibration Control by Electromagnets of an Air Spring Vibration Isolation System

NASA Technical Reports Server (NTRS)

Watanabe, Katsuhide; Cui, Weimin; Haga, Takahide; Kanemitsu, Yoichi; Yano, Kenichi

1996-01-01

Active positioning and microvibration control has been attempted by electromagnets equipped in a bellows-type, air-spring vibration isolation system. Performance tests have been carried out to study the effects. The main components of the system's isolation table were four electromagnetic actuators and controllers. The vibration isolation table was also equipped with six acceleration sensors for detecting microvibration of the table. The electromagnetic actuators were equipped with bellows-type air springs for passive support of the weight of the item placed on the table, with electromagnets for active positioning, as well as for microvibration control, and relative displacement sensors. The controller constituted a relative feedback system for positioning control and an absolute feedback system for vibration isolation control. In the performance test, a 1,490 kg load (net weight of 1,820 kg) was placed on the vibration isolation table, and both the positioning and microvibration control were carried out electromagnetically. Test results revealed that the vibration transmission was reduced by 95%.

Skull registration for prone patient position using tracked ultrasound

NASA Astrophysics Data System (ADS)

Underwood, Grace; Ungi, Tamas; Baum, Zachary; Lasso, Andras; Kronreif, Gernot; Fichtinger, Gabor

2017-03-01

PURPOSE: Tracked navigation has become prevalent in neurosurgery. Problems with registration of a patient and a preoperative image arise when the patient is in a prone position. Surfaces accessible to optical tracking on the back of the head are unreliable for registration. We investigated the accuracy of surface-based registration using points accessible through tracked ultrasound. Using ultrasound allows access to bone surfaces that are not available through optical tracking. Tracked ultrasound could eliminate the need to work (i) under the table for registration and (ii) adjust the tracker between surgery and registration. In addition, tracked ultrasound could provide a non-invasive method in comparison to an alternative method of registration involving screw implantation. METHODS: A phantom study was performed to test the feasibility of tracked ultrasound for registration. An initial registration was performed to partially align the pre-operative computer tomography data and skull phantom. The initial registration was performed by an anatomical landmark registration. Surface points accessible by tracked ultrasound were collected and used to perform an Iterative Closest Point Algorithm. RESULTS: When the surface registration was compared to a ground truth landmark registration, the average TRE was found to be 1.6+/-0.1mm and the average distance of points off the skull surface was 0.6+/-0.1mm. CONCLUSION: The use of tracked ultrasound is feasible for registration of patients in prone position and eliminates the need to perform registration under the table. The translational component of error found was minimal. Therefore, the amount of TRE in registration is due to a rotational component of error.

75 FR 44767 - Folding Metal Tables and Chairs From the People's Republic of China: Initiation of New Shipper...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-29

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-868] Folding Metal Tables and... review of the antidumping duty order on folding metal tables and chairs (``FMTCs'') from the People's... on June 27, 2002. See Antidumping Duty Order: Folding Metal Tables and Chairs From the People's...

Denatured ethanol release into gasoline residuals, Part 1: source behaviour.

PubMed

Freitas, Juliana G; Barker, James F

2013-05-01

With the increasing use of ethanol in fuels, it is important to evaluate its fate when released into the environment. While ethanol is less toxic than other organic compounds present in fuels, one of the concerns is the impact ethanol might have on the fate of gasoline hydrocarbons in groundwater. One possible concern is the spill of denatured ethanol (E95: ethanol containing 5% denaturants, usually hydrocarbons) in sites with pre-existing gasoline contamination. In that scenario, ethanol is expected to increase the mobility of the NAPL phase by acting as a cosolvent and decreasing interfacial tension. To evaluate the E95 behaviour and its impacts on pre-existing gasoline, a field test was performed at the CFB-Borden aquifer. Initially gasoline contamination was created releasing 200 L of E10 (gasoline with 10% ethanol) into the unsaturated zone. One year later, 184 L of E95 was released on top of the gasoline contamination. The site was monitored using soil cores, multilevel wells and one glass access tube. At the end of the test, the source zone was excavated and the compounds remaining were quantified. E95 ethanol accumulated and remained within the capillary fringe and unsaturated zone for more than 200 days, despite ~1m oscillations in the water table. The gasoline mobility increased and it was redistributed in the source zone. Gasoline NAPL saturations in the soil increased two fold in the source zone. However, water table oscillations caused a separation between the NAPL and ethanol: NAPL was smeared and remained in deeper positions while ethanol moved upwards following the water table rise. Similarly, the E95 denaturants that initially were within the ethanol-rich phase became separated from ethanol after the water table oscillation, remaining below the ethanol rich zone. The separation between ethanol and hydrocarbons in the source after water table oscillation indicates that ethanol's impact on hydrocarbon residuals is likely limited to early times. Copyright © 2013 Elsevier B.V. All rights reserved.

"The Jackson Table Is a Pain in the…": A Qualitative Study of Providers' Perception Toward a Spinal Surgery Table.

PubMed

Asiedu, Gladys B; Lowndes, Bethany R; Huddleston, Paul M; Hallbeck, Susan

2018-03-01

The aim of this study was to define health care providers' perceptions toward prone patient positioning for spine surgery using the Jackson Table, which has not been hitherto explored. We analyzed open-ended questionnaire data and interviews conducted with the spine surgical team regarding the current process of spinal positioning/repositioning using the Jackson Table. Participants were asked to provide an open-ended explanation as to whether they think the current process of spinal positioning/repositioning is safe for the staff or patients. Follow-up qualitative interviews were conducted with 11 of the participants to gain an in-depth understanding of the challenges and safety issues related to prone patient positioning. Data analysis resulted in 6 main categories: general challenges with patient positioning, role-specific challenges, challenges with the Jackson Table and the "sandwich" mechanism, safety concerns for patients, safety concerns for the medical staff, and recommendations for best practices. This study is relevant to everyday practice for spinal surgical team members and advances our understanding of how surgical teams qualitatively view the current process of patient positioning for spinal surgery. Providers recommended best practices for using the Jackson Table, which can be achieved through standardized practice for transfer of patients, educational tools, and checklists for equipment before patient transfer and positioning. This research has identified several important practice opportunities for improving provider and patient safety in spine surgery.

50 CFR Table 29 to Part 679 - Initial Rockfish QS Pools

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Initial Rockfish QS Pools 29 Table 29 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE (CONTINUED) FISHERIES OF THE EXCLUSIVE ECONOMIC ZONE OFF ALASKA Pt. 679...

Study on hydraulic property models for water retention and unsaturated hydraulic conductivity in MATSIRO with representation of water table dynamics

NASA Astrophysics Data System (ADS)

Yoshida, N.; Oki, T.

2016-12-01

Appropriate initial condition of soil moisture and water table depth are important factors to reduce uncertainty in hydrological simulations. Approaches to determine the initial water table depth have been developed because of difficulty to get information on global water table depth and soil moisture distributions. However, how is equilibrium soil moisture determined by climate conditions? We try to discuss this issue by using land surface model with representation of water table dynamics (MAT-GW). First, the global pattern of water table depth at equilibrium soil moisture in MAT-GW was verified. The water table depth in MAT-GW was deeper than the previous one at fundamentally arid region because the negative recharge and continuous baseflow made water table depth deeper. It indicated that the hydraulic conductivity used for estimating recharge and baseflow need to be reassessed in MAT-GW. In soil physics field, it is revealed that proper hydraulic property models for water retention and unsaturated hydraulic conductivity should be selected for each soil type. So, the effect of selecting hydraulic property models on terrestrial soil moisture and water table depth were examined.Clapp and Hornburger equation(CH eq.) and Van Genuchten equation(VG eq.) were used as representative hydraulic property models. Those models were integrated on MAT-GW and equilibrium soil moisture and water table depth with using each model were compared. The water table depth and soil moisture at grids which reached equilibrium in both simulations were analyzed. The equilibrium water table depth were deeper in VG eq. than CH eq. in most grids due to shape of hydraulic property models. Then, total soil moisture were smaller in VG eq. than CH eq. at almost all grids which water table depth reached equilibrium. It is interesting that spatial patterns which water table depth reached equilibrium or not were basically similar in both simulations but reverse patterns were shown in east and west part of America. Selection of each hydraulic property model based on soil types may compensate characteristic of models in initialization.

Reconfigurable assembly work station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Yhu-Tin; Abell, Jeffrey A.; Spicer, John Patrick

A reconfigurable autonomous workstation includes a multi-faced superstructure including a horizontally-arranged frame section supported on a plurality of posts. The posts form a plurality of vertical faces arranged between adjacent pairs of the posts, the faces including first and second faces and a power distribution and position reference face. A controllable robotic arm suspends from the rectangular frame section, and a work table fixedly couples to the power distribution and position reference face. A plurality of conveyor tables are fixedly coupled to the work table including a first conveyor table through the first face and a second conveyor table throughmore » the second face. A vision system monitors the work table and each of the conveyor tables. A programmable controller monitors signal inputs from the vision system to identify and determine orientation of the component on the first conveyor table and control the robotic arm to execute an assembly task.« less

[COSMOS motion design optimization in the CT table].

PubMed

Shang, Hong; Huang, Jian; Ren, Chao

2013-03-01

Through the CT Table dynamic simulation by COSMOS Motion, analysis the hinge of table and the motor force, then optimize the position of the hinge of table, provide the evidence of selecting bearing and motor, meanwhile enhance the design quality of the CT table and reduce the product design cost.

Ergodicity of the generalized lemon billiards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Jingyu; Mohr, Luke; Zhang, Hong-Kun, E-mail: hongkun@math.umass.edu

2013-12-15

In this paper, we study a two-parameter family of convex billiard tables, by taking the intersection of two round disks (with different radii) in the plane. These tables give a generalization of the one-parameter family of lemon-shaped billiards. Initially, there is only one ergodic table among all lemon tables. In our generalized family, we observe numerically the prevalence of ergodicity among the some perturbations of that table. Moreover, numerical estimates of the mixing rate of the billiard dynamics on some ergodic tables are also provided.

76 FR 774 - Folding Metal Tables and Chairs From the People's Republic of China: Notice of Extension of Time...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-06

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-868] Folding Metal Tables and... review of the antidumping duty order on folding metal tables and chairs from the People's Republic of China (``PRC''). See Folding Metal Tables and Chairs: Initiation of New Shipper Review, 75 FR 44767...

Radiation exposure during in-situ pinning of slipped capital femoral epiphysis hips: does the patient positioning matter?

PubMed

Mohammed, Riazuddin; Johnson, Karl; Bache, Ed

2010-07-01

Multiple radiographic images may be necessary during the standard procedure of in-situ pinning of slipped capital femoral epiphysis (SCFE) hips. This procedure can be performed with the patient positioned on a fracture table or a radiolucent table. Our study aims to look at any differences in the amount and duration of radiation exposure for in-situ pinning of SCFE performed using a traction table or a radiolucent table. Sixteen hips in thirteen patients who were pinned on radiolucent table were compared for the cumulative radiation exposure to 35 hips pinned on a fracture table in 33 patients during the same time period. Cumulative radiation dose was measured as dose area product in Gray centimeter2 and the duration of exposure was measured in minutes. Appropriate statistical tests were used to test the significance of any differences. Mean cumulative radiation dose for SCFE pinned on radiolucent table was statistically less than for those pinned on fracture table (P<0.05). The mean duration of radiation exposure on either table was not significantly different. Lateral projections may increase the radiation doses compared with anteroposterior projections because of the higher exposure parameters needed for side imaging. Our results showing decreased exposure doses on the radiolucent table are probably because of the ease of a frog leg lateral positioning obtained and thereby the ease of lateral imaging. In-situ pinning of SCFE hips on a radiolucent table has an additional advantage that the radiation dose during the procedure is significantly less than that of the procedure that is performed on a fracture table.

49 CFR 565.15 - Content requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... = 8 J = 1 K = 2 L = 3 M = 4 N = 5 P = 7 R = 9 S = 2 T = 3 U = 4 V = 5 W = 6 X = 7 Y = 8 Z = 9 (2... Decimal Equivalent Remainder as reflected in Table V. All Decimal Equivalent Remainders in Table V are... in VIN position nine (9). Table V—Ninth Position Check Digit Values [Rounded to the nearest...

Electronics for a prototype variable field of view PET camera using the PMT-quadrant-sharing detector array

NASA Astrophysics Data System (ADS)

Li, H.; Wong, Wai-Hoi; Zhang, N.; Wang, J.; Uribe, J.; Baghaei, H.; Yokoyama, S.

1999-06-01

Electronics for a prototype high-resolution PET camera with eight position-sensitive detector modules has been developed. Each module has 16 BGO (Bi/sub 4/Ge/sub 3/O/sub 12/) blocks (each block is composed of 49 crystals). The design goals are component and space reduction. The electronics is composed of five parts: front-end analog processing, digital position decoding, fast timing, coincidence processing and master data acquisition. The front-end analog circuit is a zone-based structure (each zone has 3/spl times/3 PMTs). Nine ADCs digitize integration signals of an active zone identified by eight trigger clusters; each cluster is composed of six photomultiplier tubes (PMTs). A trigger corresponding to a gamma ray is sent to a fast timing board to obtain a time-mark, and the nine digitized signals are passed to the position decoding board, where a real block (four PMTs) can be picked out from the zone for position decoding. Lookup tables are used for energy discrimination and to identify the gamma-hit crystal location. The coincidence board opens a 70-ns initial timing window, followed by two 20-ns true/accidental time-mark lookup table windows. The data output from the coincidence board can be acquired either in sinogram mode or in list mode with a Motorola/IRONICS VME-based system.

Significant Pre-Accession Factors Predicting Success or Failure During a Marine Corps Officer’s Initial Service Obligation

DTIC Science & Technology

2015-12-01

WAIVERS ..............................................................................................49  APPENDIX C. DESCRIPTIVE STATISTICS ... Statistics of Dependent Variables. .............................................23  Table 6.  Summary Statistics of Academics Variables...24  Table 7.  Summary Statistics of Application Variables ............................................25  Table 8

Ceramic inspection system

DOEpatents

Werve, Michael E [Modesto, CA

2006-05-16

A system for inspecting a ceramic component. The ceramic component is positioned on a first rotary table. The first rotary table rotates the ceramic component. Light is directed toward the first rotary table and the rotating ceramic component. A detector is located on a second rotary table. The second rotary table is operably connected to the first rotary table and the rotating ceramic component. The second rotary table is used to move the detector at an angle to the first rotary table and the rotating ceramic component.

Influence of Solid Target Reflectivity and Incident Angle on Depolarization Ratio and Reflected Energy from Polarized Lights: Experimental Results of the May 2008 Field Trial

DTIC Science & Technology

2009-11-01

enviromental targets . . . . . . . . . . . . 45 Figure 25: Relative reectivity of environmental targets . . . . . . . . . . . . 46 Figure 26: Relationship...Environmental targets and position of the center . . . . . . . . . . 41 Table 11: Depolarization ratio of enviromental targets...42 Table 12: Relative reectivity results of enviromental targets . . . . . . . . . 42 Table 13: Sand papers and position of the center

Short-term response of methane fluxes and methanogen activity to water table and soil warming manipulations in an Alaskan peatland

Treesearch

M.R. Turetsky; C.C. Treat; M. Waldrop; J.M. Waddington; J.W. Harden; A.D. McGuire

2008-01-01

Growing season CH4 fluxes were monitored over a two year period following the start of ecosystem-scale manipulations of water table position and surface soil temperatures in a moderate rich fen in interior Alaska. The largest CH4 fluxes occurred in plots that received both flooding (raised water table position) and soil...

Air-Bearing Table for Machine Shops

NASA Technical Reports Server (NTRS)

Ambrisco, D.

1986-01-01

Frequent workpiece repositioning made easier. Air-bearing table facilitates movement of heavy workpiece during machining or between repeated operations at different positions. Table assembly consists of workpiece supporting fixture riding on air bearing. Table especially useful for inertia welding, in which ease of mobility is important.

Molecular Simulations of Shear-Induced Dynamics in Nitromethane

DTIC Science & Technology

2016-09-01

initially staggered along the y axis, and then after the crystal is sheared b), the NM molecules are rotated to orient themselves in the same... rotation of the grain. ...............................................................................8 List of Tables Table 1 Summary of the maximum...it an ideal candidate to study chemical reaction mechanisms associated with conventional explosive initiation and subsequent detonation .3,6,7

40 CFR Table 5 to Subpart Zzzz of... - Initial Compliance With Emission Limitations and Operating Limitations

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 14 2012-07-01 2011-07-01 true Initial Compliance With Emission Limitations and Operating Limitations 5 Table 5 to Subpart ZZZZ of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES ...

Making the Best of a World Dominated by League Tables? New Developments in the International Ranking of Universities

ERIC Educational Resources Information Center

Observatory on Borderless Higher Education, 2010

2010-01-01

Two interesting initiatives have started to develop more balanced international league tables of universities. The first initiative is being taken by UK magazine the Times Higher Education (THE), which recently entered into a collaboration with both the international academic community and research-metrics company Thomsons Reuters to create an…

Environmental Regulatory Update Table, November--December 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

1994-01-01

The Environmental Regulatory Update Table provides information on regulatory of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated bi-monthly with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

77 FR 70991 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-28

... Monitoring System (NAHMS) will initiate the second national data collection of table egg layers through... have a role in the prevention and control of Samonella Enteritidis on table eggs farms. This working... a current estimate of the prevalence of Samonella Enteritidis on table egg farms. Need and Use of...

"The Jackson Table Is a Pain in the…": A Qualitative Study of Providers' Perception Toward a Spinal Surgery Table.

PubMed

Asiedu, Gladys B; Lowndes, Bethany R; Huddleston, Paul M; Hallbeck, Susan

2016-01-07

The aim of this study was to define health care providers' perceptions toward prone patient positioning for spine surgery using the Jackson Table, which has not been hitherto explored. We analyzed open-ended questionnaire data and interviews conducted with the spine surgical team regarding the current process of spinal positioning/repositioning using the Jackson Table. Participants were asked to provide an open-ended explanation as to whether they think the current process of spinal positioning/repositioning is safe for the staff or patients. Follow-up qualitative interviews were conducted with 11 of the participants to gain an in-depth understanding of the challenges and safety issues related to prone patient positioning. Data analysis resulted in 6 main categories: general challenges with patient positioning, role-specific challenges, challenges with the Jackson Table and the "sandwich" mechanism, safety concerns for patients, safety concerns for the medical staff, and recommendations for best practices. This study is relevant to everyday practice for spinal surgical team members and advances our understanding of how surgical teams qualitatively view the current process of patient positioning for spinal surgery. Providers recommended best practices for using the Jackson Table, which can be achieved through standardized practice for transfer of patients, educational tools, and checklists for equipment before patient transfer and positioning. This research has identified several important practice opportunities for improving provider and patient safety in spine surgery.This is an open-access article distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivitives 3.0 License, where it is permissible to download and share the work provided it is properly cited. The work cannot be changed in any way or used commercially. http://creativecommons.org/licenses/by-nc-nd/3.0.

Relative-Motion Sensors and Actuators for Two Optical Tables

NASA Technical Reports Server (NTRS)

Gursel, Yekta; McKenney, Elizabeth

2004-01-01

Optoelectronic sensors and magnetic actuators have been developed as parts of a system for controlling the relative position and attitude of two massive optical tables that float on separate standard air suspensions that attenuate ground vibrations. In the specific application for which these sensors and actuators were developed, one of the optical tables holds an optical system that mimics distant stars, while the other optical table holds a test article that simulates a spaceborne stellar interferometer that would be used to observe the stars. The control system is designed to suppress relative motion of the tables or, on demand, to impose controlled relative motion between the tables. The control system includes a sensor system that detects relative motion of the tables in six independent degrees of freedom and a drive system that can apply force to the star-simulator table in the six degrees of freedom. The sensor system includes (1) a set of laser heterodyne gauges and (2) a set of four diode lasers on the star-simulator table, each aimed at one of four quadrant photodiodes at nominal corresponding positions on the test-article table. The heterodyne gauges are used to measure relative displacements along the x axis.

50 CFR Table 1e to Part 660... - Whiting and non-whiting initial issuance allocation percentage for IFQ decided through the...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 13 2014-10-01 2014-10-01 false Whiting and non-whiting initial issuance allocation percentage for IFQ decided through the harvest specifications, 2011 1e Table 1e to Part 660, Subpart C Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC...

Period of an Interrupted Pendulum

NASA Astrophysics Data System (ADS)

Miller, Bradley E.

2002-11-01

While demonstrating a classic conservation-of-energy problem to my AP Physics students, I became curious about the periodic motion that ensued for certain initial conditions. The original problem consists of releasing a mass at the end of a string from an initial position horizontal to the plane of a table. The string comes in contact with a peg some distance below the point where the string is attached at the top. One is asked to find what minimum fraction of the string's length should the peg be placed to have the mass complete a circle about the peg. However, when the mass is released from much lower heights, the system undergoes periodic motion that can be thought of as an interrupted pendulum.

An instrument for spatial conductivity measurements of high Tc superconducting (HTSC) materials

NASA Technical Reports Server (NTRS)

Vansant, T.

1991-01-01

High T(sub c) Superconducting (HTSC) thin films are suggested for use in a number of aerospace applications such as an IR bolometer and as electromagnetic shielding. As part of its flight assurance role, the Materials Branch of the Goddard Space Flight Center has initiated development of an instrument capable of measuring variations in conductivity for flat samples using an eddy current testing device and an X-Y positioning table. This instrument was used to examine bulk HTSC samples. System changes that would enable characterization of thin film materials are discussed.

A comparison of northern and southern table mountain pine stands

Treesearch

Patrick H. Brose; Thomas A. Waldrop; Helen H. Mohr

2010-01-01

Table Mountain pine (Pinus pungens) stands occur throughout the Appalachian Mountains, but ecological research has concentrated on the southern part of this region. In 2006, research was initiated in northern Table Mountain pine stands growing in PA to compare some basic attributes of those stands with previously described ones in TN. Overall, the...

40 CFR Table 5 to Subpart Dddd of... - Performance Testing and Initial Compliance Demonstrations for the Compliance Options and...

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Process unit listed in Table 1B to this subpart Reduce emissions of total HAP, measured as THC, by 90... listed in Table 1B to this subpart Limit emissions of total HAP, measured as THC, to 20 ppmvd The average...

40 CFR Table 5 to Subpart Dddd of... - Performance Testing and Initial Compliance Demonstrations for the Compliance Options and...

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Process unit listed in Table 1B to this subpart Reduce emissions of total HAP, measured as THC, by 90... listed in Table 1B to this subpart Limit emissions of total HAP, measured as THC, to 20 ppmvd The average...

40 CFR Table 5 to Subpart Dddd of... - Performance Testing and Initial Compliance Demonstrations for the Compliance Options and...

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Process unit listed in Table 1B to this subpart Reduce emissions of total HAP, measured as THC, by 90... listed in Table 1B to this subpart Limit emissions of total HAP, measured as THC, to 20 ppmvd The average...

SU-F-P-31: Dosimetric Effects of Roll and Pitch Corrections Using Robotic Table

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mamalui, M; Su, Z; Flampouri, S

Purpose: To quantify the dosimetric effect of roll and pitch corrections being performed by two types of robotic tables available at our institution: BrainLabTM 5DOF robotic table installed at VERO (BrainLab&MHI) dedicated SBRT linear accelerator and 6DOF robotic couch by IBA Proton Therapy with QFixTM couch top. Methods: Planning study used a thorax phantom (CIRSTM), scanned at 4DCT protocol; targets (IGTV, PTV) were determined according to the institutional lung site-specific standards. 12 CT sets were generated with Pitch and Roll angles ranging from −4 to +4 degrees each. 2 table tops were placed onto the scans according to the modality-specificmore » patient treatment workflows. The pitched/rolled CT sets were fused to the original CT scan and the verification treatment plans were generated (12 photon SBRT plans and 12 proton conventional fractionation lung plans). Then the CT sets were fused again to simulate the effect of patient roll/pitch corrections by the robotic table. DVH sets were evaluated for all cases. Results: The effect of not correcting the phantom position for roll/pitch in photon SBRT cases was reducing the target coverage by 2% as maximum; correcting the positional errors by robotic table varied the target coverage within 0.7%. in case of proton treatment, not correcting the phantom position led to the coverage loss up to 4%, applying the corrections using robotic table reduced the coverage variation to less than 2% for PTV and within 1% for IGTV. Conclusion: correcting the patient position by using robotic tables is highly preferable, despite the small dosimetric changes introduced by the devices.« less

Factors affecting re-vegetation dynamics of experimentally restored extracted peatland in Estonia.

PubMed

Karofeld, Edgar; Müür, Mari; Vellak, Kai

2016-07-01

Increasing human activity continues to threaten peatlands, and as the area of natural mires declines, our obligation is to restore their ecosystem functions. Several restoration strategies have been developed for restoration of extracted peatlands, including "The moss layer transfer method", which was initiated on the Tässi extracted peatland in central Estonia in May 2012. Three-year study shows that despite the fluctuating water table, rainfall events can compensate for the insufficient moisture for mosses. Total plant cover on the restoration area attained 70 %, of which ~60 % is comprised of target species-Sphagnum mosses. From restoration treatments, spreading of plant fragments had a significant positive effect on the cover of bryophyte and vascular plants. Higher water table combined with higher plant fragments spreading density and stripping of oxidised peat layer affected positively the cover of targeted Sphagnum species. The species composition in the restoration area became similar to that in the donor site in a natural bog. Based on results, it was concluded that the method approved for restoration in North America gives good results also in the restoration of extracted peatland towards re-establishment of bog vegetation under northern European conditions.

Diagnosis of carotid sinus hypersensitivity in older adults: carotid sinus massage in the upright position is essential

PubMed Central

Parry, S; Richardson, D; O'Shea, D; Sen, B; Kenny, R

2000-01-01

OBJECTIVE—To assess the diagnostic value of supine and upright carotid sinus massage in elderly patients.
DESIGN—Prospective controlled cohort study.
SETTING—Three inner city accident and emergency departments and a dedicated syncope facility.
PATIENTS—1375 consecutive patients aged > 55 years presenting with unexplained syncope and drop attacks; 25 healthy controls.
INTERVENTIONS—Bilateral supine carotid sinus massage, repeated in the 70° head up tilt position if the initial supine test was not diagnostic of cardioinhibitory and mixed carotid sinus hypersensitivity.
MAIN OUTCOME MEASURES—Diagnosis of cardioinhibitory or mixed carotid sinus hypersensitivity; clinical characteristics of supine v upright positive groups.
RESULTS—226 patients were excluded for contraindications to carotid sinus massage. Of 1149 patients undergoing massage, 223 (19%) had cardioinhibitory or mixed carotid sinus hypersensitivity; 70 (31%) of these had a positive response to massage with head up tilt following negative supine massage (95% confidence interval, 25.3% to 37.5%). None of the healthy controls showed carotid sinus hypersensitivity on erect or supine massage. The initially positive supine test had 74% specificity and 100% sensitivity; these were both 100% for the upright positive test. The clinical characteristics of the supine v upright positive subgroups were similar.
CONCLUSIONS—The diagnosis of carotid sinus hypersensitivity amenable to treatment by pacing may be missed in one third of cases if only supine massage is performed. Massage should be done routinely in the head up tilt position if the initial supine test is negative.


Keywords: carotid sinus; tilt table testing; syncope; elderly patients PMID:10618329

Viscoelastic Properties of Advanced Polymer Composites for Ballistic Protective Applications

DTIC Science & Technology

1994-09-01

ofthe Damaged Sample 78 Figure 69: Fracture Surface of Damage Area Near the Point of Penetration 79 Figure 70. Closer View ofthe Damaged Area...LIST OF TABLES Table 1. Basic Mechanical Properties of the Materials 6 Table 2. Initial DMA Test Results 23 Table 3. Flexural Three Point Bend... point bend testing was conducted using an Instron 1127 Universal Tester to verify the DMA test method and specimen clamping configuration. Interfacial

A common periodic table of codons and amino acids.

PubMed

Biro, J C; Benyó, B; Sansom, C; Szlávecz, A; Fördös, G; Micsik, T; Benyó, Z

2003-06-27

A periodic table of codons has been designed where the codons are in regular locations. The table has four fields (16 places in each) one with each of the four nucleotides (A, U, G, C) in the central codon position. Thus, AAA (lysine), UUU (phenylalanine), GGG (glycine), and CCC (proline) were placed into the corners of the fields as the main codons (and amino acids) of the fields. They were connected to each other by six axes. The resulting nucleic acid periodic table showed perfect axial symmetry for codons. The corresponding amino acid table also displaced periodicity regarding the biochemical properties (charge and hydropathy) of the 20 amino acids and the position of the stop signals. The table emphasizes the importance of the central nucleotide in the codons and predicts that purines control the charge while pyrimidines determine the polarity of the amino acids. This prediction was experimentally tested.

The Effects of Peatland Plant Functional Types and Altered Hydrology on Porewater Chemistry in a Northern Bog

NASA Astrophysics Data System (ADS)

Daniels, A.; Kane, E. S.; Lilleskov, E. A.; Kolka, R. K.; Chimner, R. A.; Potvin, L. R.; Romanowicz, K. J.

2012-12-01

Northern wetlands, peatlands in particular, have been shown to store around 30% of the world's soil carbon and thus play a significant role in the carbon cycle of our planet. Carbon accumulation in peatlands is the result of retarded decomposition due to low oxygen availability in these water-logged environments. Changes in our planet's climate cycles are altering peatland hydrology and vegetation communities, resulting in changes in their ability to sequester carbon through increases in peat carbon oxidation and mineralization. To date, the consequences of altered hydrology and changes in vegetation communities, and their interactive effects on carbon storage, are not well understood. We have initiated a research plan that assesses the varying roles that water table variation and vegetation communities have on extracellular enzyme activity and labile carbon availability in porewater from an ombrotrophic bog. We assessed the effects of plant functional group (ericaceous shrubs, sedges, and bryophytes) and water table position on biogeochemical processes. Specifically, we measured dissolved organic carbon (DOC), total dissolved nitrogen (TDN), enzyme activity, organic acids, anions and cations, spectral indexes of aromaticity, and phenolic content in addressing our hypotheses of responses to climate change drivers. Research on these components will evaluate the relative importance of biology, water table, and their interactive affects on the porewater quality of peatlands. We hypothesized that oxygen availability will strongly influence decomposition in these systems but that this response will largely be mediated by changes in plant community and the enzymes associated with root exudates and mycorrhizae. To date, our data confirm vegetation and water table related patterns. Acetate and propionate concentrations in the sedge-dominated communities dropped significantly with depth and drainage, relative to the control and ericaceous treatments, which likely reflects changes in redox potential owing to physiological differences in sedges which contain aerenchyma cell, and a reduction in the products of anaerobic metabolism. DOC increased in the lowered water table treatments in all vegetation community types. Enzymatic activities have changed in response to water table level and vegetation community. While we have not detected significant levels of peroxidase enzymes in porewater, initial results indicate that hydrolase enzyme activities were higher in the sedge-dominated communities with a lowered water table. Through this research, we are hoping to advance our knowledge of the drivers behind peatland biogeochemistry and how ombrotrophic peat systems may respond to climate change influences.

Design Report for the Synchronized Position, Velocity, and Time Code Generator

DTIC Science & Technology

2015-08-01

Stream Specification 4 2.3 Data Packet Format Specification 4 2.3.1 Individual Message Definition 5 3. MATLAB Parsing Software 6 4. Conclusions and...packet format structure ..................................................................4 Table 2 PPS time message definition ...5 Table 3 Position message definition ...................................................................5

Age patterns of smoking initiation among Kuwait university male students.

PubMed

Sugathan, T N; Moody, P M; Bustan, M A; Elgerges, N S

1998-12-01

The present study is a detailed evaluation of age at smoking initiation among university male students in Kuwait based on a random sample of 664 students selected from all students during 1993. The Acturial Life Table analysis revealed that almost one tenth of the students initiated cigarette smoking between ages 16 and 17 with the rate of initiation increasing rapidly thereafter and reaching 30% by age 20 and almost 50% by the time they celebrate their 24th birthday. The most important environmental risk factor positively associated for smoking initiation was observed to be the history of smoking among siblings with a relative risk of 1.4. Compared to students of medicine and engineering, the students of other faculties revealed a higher risk in smoking initiation with an RR = 1.77 for sciences and commerce and 1.61 for other faculties (arts, law, education and Islamic studies). The analysis revealed a rising generation trend in cigarette smoking. There is a need for reduction of this trend among young adults in Kuwait and throughout other countries in the region.

Monte Carlo calculations of initial energies of electrons in water irradiated by photons with energies up to 1GeV.

PubMed

Todo, A S; Hiromoto, G; Turner, J E; Hamm, R N; Wright, H A

1982-12-01

Previous calculations of the initial energies of electrons produced in water irradiated by photons are extended to 1 GeV by including pair and triplet production. Calculations were performed with the Monte Carlo computer code PHOEL-3, which replaces the earlier code, PHOEL-2. Tables of initial electron energies are presented for single interactions of monoenergetic photons at a number of energies from 10 keV to 1 GeV. These tables can be used to compute kerma in water irradiated by photons with arbitrary energy spectra to 1 GeV. In addition, separate tables of Compton-and pair-electron spectra are given over this energy range. The code PHOEL-3 is available from the Radiation Shielding Information Center, Oak Ridge National Laboratory, Oak Ridge, TN 37830.

Relating Functional Groups to the Periodic Table

ERIC Educational Resources Information Center

Struyf, Jef

2009-01-01

An introduction to organic chemistry functional groups and their ionic variants is presented. Functional groups are ordered by the position of their specific (hetero) atom in the periodic table. Lewis structures are compared with their corresponding condensed formulas. (Contains 5 tables.)

Addiction treatment-related Employment barriers: the impact of methadone maintenance

PubMed Central

Richardson, Lindsey; Wood, Evan; Montaner, Julio; Kerr, Thomas

2012-01-01

Employment is commonly upheld as an important outcome of addiction treatment. To explore this attribution we assessed whether treatment enrolment predicts employment initiation among participants enrolled in a community-recruited Canadian cohort of people who inject drugs (IDU) (n=1579). Survival analysis initially found no association between addiction treatment enrolment and employment initiation. However, when methadone maintenance therapy (MMT) was separated from other treatment modalities, non-MMT treatment positively predicted employment transitions, while MMT was negatively associated with employment initiation. Sub-analyses examining transitions into temporary, informal and under-the-table income generation echo these results. Findings suggest that individual factors impacting employment transitions may systematically apply to MMT clients, and that, in this setting, the impact of treatment on employment outcomes is contingent on treatment type and design. Treatment-specific differences underscore the need to expand low-threshold MMT, explore MMT alternatives and evaluate the impact of treatment design on the social and economic activity of IDU. PMID:22301085

12 CFR Appendix A to Part 371 - File Structure for Qualified Financial Contract (QFC) Records

Code of Federal Regulations, 2010 CFR

2010-01-01

... acceptable to the FDIC, the position level data found in Table A1 for all open positions in QFCs entered into... electronic files that will be used by the institution to maintain the position level data found in Table A1... this information. In addition, for such data, the institution must produce at the close of processing...

12 CFR Appendix A to Part 371 - File Structure for Qualified Financial Contract (QFC) Records

Code of Federal Regulations, 2011 CFR

2011-01-01

... acceptable to the FDIC, the position level data found in Table A1 for all open positions in QFCs entered into... electronic files that will be used by the institution to maintain the position level data found in Table A1... this information. In addition, for such data, the institution must produce at the close of processing...

12 CFR Appendix A to Part 371 - File Structure for Qualified Financial Contract (QFC) Records

Code of Federal Regulations, 2013 CFR

2013-01-01

... acceptable to the FDIC, the position level data found in Table A1 for all open positions in QFCs entered into... electronic files that will be used by the institution to maintain the position level data found in Table A1... this information. In addition, for such data, the institution must produce at the close of processing...

12 CFR Appendix A to Part 371 - File Structure for Qualified Financial Contract (QFC) Records

Code of Federal Regulations, 2014 CFR

2014-01-01

... acceptable to the FDIC, the position level data found in Table A1 for all open positions in QFCs entered into... electronic files that will be used by the institution to maintain the position level data found in Table A1... this information. In addition, for such data, the institution must produce at the close of processing...

12 CFR Appendix A to Part 371 - File Structure for Qualified Financial Contract (QFC) Records

Code of Federal Regulations, 2012 CFR

2012-01-01

... acceptable to the FDIC, the position level data found in Table A1 for all open positions in QFCs entered into... electronic files that will be used by the institution to maintain the position level data found in Table A1... this information. In addition, for such data, the institution must produce at the close of processing...

77 FR 10695 - Federal Housing Administration (FHA) Risk Management Initiatives: Revised Seller Concessions

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-23

... in Tables A and B. Table D--Borrower Closing Costs and Seller Concessions Descriptive Statistics by... accuracy of the statistical data illustrating the correlation between higher seller concessions and an...

--No Title--

Science.gov Websites

{background-color:#d7dee6}.table-hover>tbody>tr.selected>td,.table-hover>tbody>tr.selected> ;th,.table-hover>tbody>tr:hover>td,.table-hover>tbody>tr:hover>th{background-color :#243c54;color:#fff;cursor:pointer}.affix{position:fixed;top:0;z-index:999}.lead,body,h1,h2,h3,h4,h5,h6

Effect of irrigation water salinity and sodicity and water table position on water table chemistry beneath Atriplex lentiformis and Hordeum marinum

DOE Office of Scientific and Technical Information (OSTI.GOV)

Browning, L.S.; Bauder, J.W.; Phelps, S.D.

2006-04-15

Coal bed methane (CBM) extraction in Montana and Wyoming's Powder River Basin (PRB) produces large quantities of modestly saline-sodic water. This study assessed effects of irrigation water quality and water table position on water chemistry of closed columns, simulating a perched or a shallow water table. The experiment assessed the potential salt loading in areas where shallow or perched water tables prevent leaching or where artificial drainage is not possible. Water tables were established in sand filled PVC columns at 0.38, 0.76, and1.14 m below the surface, after which columns were planted to one of three species, two halophytic Atriplexmore » spp. and Hordeum marinum Huds. (maritime barley), a glycophyte. As results for the two Atriplex ssp. did not differ much, only results from Atriplex lentiformis (Torn) S. Wats. (big saltbush) and H. marinum are presented. Irrigation water representing one of two irrigation sources was used: Powder River (PR) (electrolytic conductivity (EC) = 0.19 Sm{sup -1}, sodium adsorption ratio (SAR) = 3.5) or CBM water (EC = 0.35 Sm-1, SAR = 10.5). Continuous irrigation with CBM and PR water led to salt loading over time, the extent being proportional to the salinity and sodicity of applied water. Water in columns planted to A. lentiformis with water tables maintained at 0.38 m depth had greater EC and SAR values than those with 0.76 and 1.14 m water table positions. Elevated EC and SAR values most likely reflect the shallow rooted nature of A. lentiformis, which resulted in enhanced ET with the water table close to the soil surface.« less

Coping Behavior of International Late Adolescent Students in Selected Australian Educational Institutions

PubMed Central

Shahrill, Masitah; Mundia, Lawrence

2014-01-01

Using the Adolescent Coping Scale, ACS (Frydenberg & Lewis, 1993) we surveyed 45 randomly selected foreign adolescents in Australian schools. The coping strategies used most by the participants were: focus on solving the problem; seeking relaxing diversions; focusing on the positive; seeking social support; worry; seeking to belong; investing in close friends; wishful thinking; and keep to self (Table 4). With regard to coping styles, the most widely used was the productive coping followed by non-productive coping while the least used style was reference to others (Table 4). In terms of both genders the four coping strategies used most often were: work hard to achieve; seeking relaxing diversions; focus on solving the problem; and focus on the positive (Table 5). The most noticeable gender difference was the use of the physical recreation coping strategy in which male students engaged more (Fig 1). The usage of four coping strategies (solving problem; work hard; focus on positive; and social support) was higher for students who have been away from family more than once as compared to those who have been away once only while the usage of seeking relaxing diversions was higher for the first timers (Table 6). No significant differences were obtained on the sample’s performance on the ACS subscales by gender (Table 7), frequency of leaving own country (Table 8), country of origin (Table 9), and length of stay in Australia (Table 11). However, foundation students scored significantly higher on the reference to others variable than their secondary school peers (Table 10). We recommended counseling for students with high support needs and further large-scale mixed-methods research to gain additional insights. PMID:24373267

21 CFR 884.4900 - Obstetric table and accessories.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Devices § 884.4900 Obstetric table and accessories. (a) Identification. An obstetric table is a device with adjustable sections designed to support a patient in the various positions required during...: patient equipment, support attachments, and cabinets for warming instruments and disposing of wastes. (b...

Joint Improvised-Threat Defeat Agency Needs to Improve Assessment and Documentation of Counter-Improvised Explosive Device Initiatives (Redacted)

DTIC Science & Technology

2016-08-09

2 Slight rounding inconsistencies exist because auditor calculations included decimals. (FOUO) Table 2. (FOUO) No. Initiative Title1 FY Action...rounding inconsistencies exist because auditor calculations included decimals. Acronyms: USAF United States Air Force USMC United States Marine Corps...exist because auditor calculations included decimals. (FOUO) Table 3. FOR OFFICIAL USE ONLY FOR OFFICIAL USE ONLY Management Comments 30 │ DODIG-2016

Constructing a Database from Multiple 2D Images for Camera Pose Estimation and Robot Localization

NASA Technical Reports Server (NTRS)

Wolf, Michael; Ansar, Adnan I.; Brennan, Shane; Clouse, Daniel S.; Padgett, Curtis W.

2012-01-01

The LMDB (Landmark Database) Builder software identifies persistent image features (landmarks) in a scene viewed multiple times and precisely estimates the landmarks 3D world positions. The software receives as input multiple 2D images of approximately the same scene, along with an initial guess of the camera poses for each image, and a table of features matched pair-wise in each frame. LMDB Builder aggregates landmarks across an arbitrarily large collection of frames with matched features. Range data from stereo vision processing can also be passed to improve the initial guess of the 3D point estimates. The LMDB Builder aggregates feature lists across all frames, manages the process to promote selected features to landmarks, and iteratively calculates the 3D landmark positions using the current camera pose estimations (via an optimal ray projection method), and then improves the camera pose estimates using the 3D landmark positions. Finally, it extracts image patches for each landmark from auto-selected key frames and constructs the landmark database. The landmark database can then be used to estimate future camera poses (and therefore localize a robotic vehicle that may be carrying the cameras) by matching current imagery to landmark database image patches and using the known 3D landmark positions to estimate the current pose.

Relationships among plants, soils and microbial communities along a hydrological gradient in the New Jersey Pinelands, USA

PubMed Central

Yu, Shen; Ehrenfeld, Joan G.

2010-01-01

Background and Aims Understanding the role of different components of hydrology in structuring wetland communities is not well developed. A sequence of adjacent wetlands located on a catenary sequence of soils and receiving the same sources and qualities of water is used to examine specifically the role of water-table median position and variability in affecting plant and microbial community composition and soil properties. Methods Two replicates of three types of wetland found adjacent to each other along a hydrological gradient in the New Jersey Pinelands (USA) were studied. Plant-community and water-table data were obtained within a 100-m2 plot in each community (pine swamp, maple swamp and Atlantic-white-cedar swamp). Monthly soil samples from each plot were analysed for soil moisture, organic matter, extractable nitrogen fractions, N mineralization rate and microbial community composition. Multivariate ordination methods were used to compare patterns among sites within and between data sets. Key Results The maple and pine wetlands were more similar to each other in plant community composition, soil properties and microbial community composition than either was to the cedar swamps. However, maple and pine wetlands differed from each other in water-table descriptors as much as they differed from the cedar swamps. All microbial communities were dominated by Gram-positive bacteria despite hydrologic differences among the sites. Water-table variability was as important as water-table level in affecting microbial communities. Conclusions Water tables affect wetland communities through both median level and variability. Differentiation of both plant and microbial communities are not simple transforms of differences in water-table position, even when other hydrologic factors are kept constant. Rather, soil genesis, a result of both water-table position and geologic history, appears to be the main factor affecting plant and microbial community similarities. PMID:19643908

Elevated Radiation Exposure Associated With Above Surface Flat Detector Mini C-Arm Use.

PubMed

Martin, Dennis P; Chapman, Talia; Williamson, Christopher; Tinsley, Brian; Ilyas, Asif M; Wang, Mark L

2017-11-01

This study aims to test the hypothesis that: (1) radiation exposure is increased with the intended use of Flat Surface Image Intensifier (FSII) units above the operative surface compared with the traditional below-table configuration; (2) this differential increases in a dose-dependent manner; and (3) radiation exposure varies with body part and proximity to the radiation source. A surgeon mannequin was seated at a radiolucent hand table, positioned for volar distal radius plating. Thermoluminescent dosimeters measured exposure to the eyes, thyroid, chest, hand, and groin, for 1- and 15-minute trials from a mini C-arm FSII unit positioned above and below the operating surface. Background radiation was measured by control dosimeters placed within the operating theater. At 1-minute of exposure, hand and eye dosages were significantly greater with the flat detector positioned above the table. At 15-minutes of exposure, hand radiation dosage exceeded that of all other anatomic sites with the FSII in both positions. Hand exposure was increased in a dose-dependent manner with the flat detector in either position, whereas groin exposure saw a dose-dependent only with the flat detector beneath the operating table. These findings suggest that the surgeon's hands and eyes may incur greater radiation exposure compared with other body parts, during routine mini C-arm FSII utilization in its intended position above the operating table. The clinical impact of these findings remains unclear, and future long-term radiation safety investigation is warranted. Surgeons should take precautions to protect critical body parts, particularly when using FSII technology above the operating with prolonged exposure time.

Transport of volatile organic compounds across the capillary fringe

USGS Publications Warehouse

McCarthy, Kathleen A.; Johnson, Richard L.

1993-01-01

Physical experiments were conducted to investigate the transport of a dissolved volatile organic compound (trichloroethylene, TCE) from shallow groundwater to the unsaturated zone under a variety of conditions including changes in the soil moisture profile and water table position. Experimental data indicated that at moderate groundwater velocities (0.1 m/d), vertical mechanical dispersion was negligible and molecular diffusion was the dominant vertical transport mechanism. Under these conditions, TCE concentrations decreased nearly 3 orders of magnitude across the capillary fringe and soil gas concentrations remained low relative to those of underlying groundwater. Data collected during a water table drop showed a short-term increase in concentrations throughout most of the unsaturated zone, but these concentrations quickly declined and approached initial values after the water table was returned to its original level. In the deep part of the unsaturated zone, the water table drop resulted in a long-term decrease in concentrations, illustrating the effects of hysteresis in the soil moisture profile. A two-dimensional random walk advection-diffusion model was developed to simulate the experimental conditions, and numerical simulations agreed well with experimental data. A simpler, one-dimensional finite-difference diffusion-dispersion model was also developed. One-dimensional simulations based on molecular diffusion also agreed well with experimental data. Simulations which incorporated mechanical dispersion tended to overestimate flux across the capillary fringe. Good agreement between the one- and two-dimensional models suggested that a simple, one-dimensional approximation of vertical transport across the capillary fringe can be useful when conditions are appropriate.

Diameter growth and phenology of trees on sites with high water tables

Treesearch

D.C. McClurkin

1965-01-01

On a site where the water table always was within the root zone, thinning had little effect on diameter growth of white ash or sweetgum but increased the growth of baldcypress. Thinning did not extend durating of growth into the fall, nor was growth related to seasonal fluctuations in the water table. In ash and sweetgum, growth initiation seemed related to soil...

Toward Creation of a National Table for Aboriginal Literacy and Essential Skills (NTALES). Report on Meeting of May 27, 2014

ERIC Educational Resources Information Center

Canadian Literacy and Learning Network, 2014

2014-01-01

The Canadian Literacy and Learning Network (CLLN), in partnership with Aboriginal community leaders and literacy experts, is leading an initiative to create a National Table for Aboriginal Literacy and Essential Skills (NTALES). A potential role of the National Table will be to represent First Nation, Metis and Inuit literacy and essential skills…

Comparison of stratified and non-stratified most similar neighbour imputation for estimating stand tables

Treesearch

Bianca N. I. Eskelson; Hailemariam Temesgen; Tara M. Barrett

2008-01-01

Many growth and yield simulators require a stand table or tree-list to set the initial condition for projections in time. Most similar neighbour (MSN) approaches can be used for estimating stand tables from information commonly available on forest cover maps (e.g. height, volume, canopy cover, and species composition). Simulations were used to compare MSN (using an...

21 CFR 876.4890 - Urological table and accessories.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., stirrups, and belts used to support a patient in a suitable position for endoscopic procedures of the lower...) Class II (special controls) for the electrically powered urological table and accessories. The device is... § 876.9. (2) Class I for the manually powered table and accessories, and for stirrups for electrically...

The scheme of a blindless positioning structure with parallel adjusting tables and swing rods for 4000 optical fibres of LAMOST.

NASA Astrophysics Data System (ADS)

Yunguo, Gao

1996-12-01

This scheme structure is for positioning 4000 optical fibres of LAMOST telescope. It adopts the swing rods adjusted parallel and simultaneously by many small tables. The problems, for example, positioning accuracy of the optical fibers, the time to readjust all the 4000 optical fibres and error correction, etc. have been considered in the scheme. The structure has no blind area.

Coaxial Virtual Cathode Enhancement

DTIC Science & Technology

2004-10-20

need more solid evidence to clarify them. Table 2. Frequency list for geometries without reflectors, showing the microwave frequencies based on their...frequency. V. The Functions of the Reflectors Table 3 is a frequency list with the donut reflector at different positions. From Table 3, we can see that...both cases. We do observe that the microwave power generally is decreased by the donut reflector. Table 3. Frequency list for geometries with a donut

Design and Integration of a Rotor Alone Nacelle for Acoustic Fan Testing

NASA Technical Reports Server (NTRS)

Shook, Tony D.; Hughes, Christoper E.; Thompson, William K.; Tavernelli, Paul F.; Cunningham, Cameron C.; Shah, Ashwin

2001-01-01

A brief summary of the design, integration and testing of a rotor alone nacelle (RAN) in NASA Glenn's 9'x 15' Low Speed Wind Tunnel (LSWT) is presented. The purpose of the RAN system was to provide an "acoustically clean" flow path within the nacelle to isolate that portion of the total engine system acoustic signature attributed to fan noise. The RAN design accomplished this by removing the stators that provided internal support to the nacelle. In its place, two external struts mounted to a two-axis positioning table located behind the tunnel wall provided the support. Nacelle-mounted lasers and a closed-loop control system provided the input to the table to maintain nacelle to fan concentricity as thermal and thrust loads displaced the strut-mounted fan. This unique design required extensive analysis and verification testing to ensure the safety of the fan model, propulsion simulator drive rig, and facility, along with experimental consistency of acoustic data obtained while using the RAN system. Initial testing was used to optimize the positioning system and resulted in concentricity errors of +/- 0.0031 in. in the horizontal direction and +0.0035/-0.0013 in, in the vertical direction. As a result of successful testing, the RAN system will be transitioned into other acoustic research programs at NASA Glenn Research Center.

Dyspnea in a nonagenarian: The usual suspects, an unexpected culprit.

PubMed

Madeira, Sérgio; Raposo, Luís; David, Raquel; Marques, Alexandre; Andrade Gomes, José; Cardim, Nuno; Anjos, Rui

2015-09-01

Platypnea-orthodeoxia syndrome (POS) is an uncommon syndrome characterized by dyspnea and hypoxemia triggered by orthostatism and relieved by recumbency. It is often associated with an interatrial shunt through a patent foramen ovale (PFO). We report the case of a 92-year-old woman initially admitted in the setting of a traumatic femoral neck fracture (successfully treated with hip replacement surgery) in whom a reversible decline in transcutaneous oxygen saturation from 98% (in the supine position) to 84% (in the upright position) was noted early post-operatively. Thoracic multislice computed tomography excluded pulmonary embolism and severe parenchymal lung disease. The diagnosis of POS was confirmed by tilt-table contrast transesophageal echocardiography, which demonstrated a dynamic and position-dependent right-to-left shunt (torrential when semi-upright and minimal in the supine position) through a PFO. The patient underwent percutaneous closure of the PFO with an Amplatzer device, which led to prompt symptom relief and full functional recovery. Copyright © 2014 Sociedade Portuguesa de Cardiologia. Published by Elsevier España. All rights reserved.

Linking soil moisture balance and source-responsive models to estimate diffuse and preferential components of groundwater recharge

USGS Publications Warehouse

Cuthbert, M.O.; Mackay, R.; Nimmo, J.R.

2012-01-01

Results are presented of a detailed study into the vadose zone and shallow water table hydrodynamics of a field site in Shropshire, UK. A conceptual model is developed and tested using a range of numerical models, including a modified soil moisture balance model (SMBM) for estimating groundwater recharge in the presence of both diffuse and preferential flow components. Tensiometry reveals that the loamy sand topsoil wets up via macropore flow and subsequent redistribution of moisture into the soil matrix. Recharge does not occur until near-positive pressures are achieved at the top of the sandy glaciofluvial outwash material that underlies the topsoil, about 1 m above the water table. Once this occurs, very rapid water table rises follow. This threshold behaviour is attributed to the vertical discontinuity in the macropore system due to seasonal ploughing of the topsoil, and a lower permeability plough/iron pan restricting matrix flow between the topsoil and the lower outwash deposits. Although the wetting process in the topsoil is complex, a SMBM is shown to be effective in predicting the initiation of preferential flow from the base of the topsoil into the lower outwash horizon. The rapidity of the response at the water table and a water table rise during the summer period while flow gradients in the unsaturated profile were upward suggest that preferential flow is also occurring within the outwash deposits below the topsoil. A variation of the source-responsive model proposed by Nimmo (2010) is shown to reproduce the observed water table dynamics well in the lower outwash horizon when linked to a SMBM that quantifies the potential recharge from the topsoil. The results reveal new insights into preferential flow processes in cultivated soils and provide a useful and practical approach to accounting for preferential flow in studies of groundwater recharge estimation.

Groundwater in the Boreal Plains: How Climate and Geology Interact to Control Water Table Configurations in a Sub-Humid, Low-Relief Region

NASA Astrophysics Data System (ADS)

Hokanson, K. J.; Devito, K.; Mendoza, C. A.

2017-12-01

The Boreal Plain (BP) region of Canada, a landscape characterized by low-relief, a sub-humid climate and heterogeneous glacial landforms, is experiencing unprecedented anthropogenic and natural disturbance, including climate change and oil & gas operations. Understanding the controls on and the natural variability of water table position, and subsequently predicting changes in water table position under varying physical and climatic scenarios will become important as water security becomes increasingly threatened. The BP is composed of a mosaic of forestland, wetland, and aquatic land covers that contrast in dominant vegetation cover, evapotranspiration, and soil storage that, in turn, influence water table configurations. Additionally, these land-covers overlie heterogeneous glacial landforms with large contrasts in storage and hydraulic properties which, when coupled with wet-dry climate cycles, result in complex water table distributions in time and space. Several forestland-wetland-pond complexes were selected at the Utikuma Research Study Area (URSA) over three distinct surficial geologic materials (glacial fluvial outwash, stagnant ice moraine, lacustrine clay plain) to explore the roles of climate (cumulative departure from the long term yearly mean precipitation), geology, topographic position, and land cover on water table configurations over 15 years (2002 - 2016). In the absence of large groundwater flow systems, local relief and shallow low conductivity substrates promote the formation of near-surface water tables that are less susceptible to climate variation, regardless of topography. Furthermore, in areas of increased storage, wet and dry climate conditions can result in appreciably different water table configurations over time, ranging from mounds to hydraulic depressions, depending on the arrangement of land-covers, dominant surficial geology, and substrate layering.

40 CFR Table 3 to Subpart Yyyy of... - Requirements for Performance Tests and Initial Compliance Demonstrations

Code of Federal Regulations, 2012 CFR

2012-07-01

... Pollutants for Stationary Combustion Turbines Pt. 63, Subpt. YYYY, Table 3 Table 3 to Subpart YYYY of Part 63... points AND Method 1 or 1A of 40 CFR part 60, appendix A § 63.7(d)(1)(i) if using an air pollution control device, the sampling site must be located at the outlet of the air pollution control device. c. determine...

40 CFR 63.11935 - What CEMS and CPMS requirements must I meet to demonstrate initial and continuous compliance with...

Code of Federal Regulations, 2012 CFR

2012-07-01

... process vents in Table 1 or 2 to this subpart. You must meet the CPMS requirements in paragraph (c) of... parameter specified in Table 5 to this subpart for each process vent control device specified in § 63.11925(b) that is used to comply with the emission limits for process vents in Table 1 or 2 to this subpart...

40 CFR 63.11935 - What CEMS and CPMS requirements must I meet to demonstrate initial and continuous compliance with...

Code of Federal Regulations, 2014 CFR

2014-07-01

... process vents in Table 1 or 2 to this subpart. You must meet the CPMS requirements in paragraph (c) of... parameter specified in Table 5 to this subpart for each process vent control device specified in § 63.11925(b) that is used to comply with the emission limits for process vents in Table 1 or 2 to this subpart...

40 CFR 63.11935 - What CEMS and CPMS requirements must I meet to demonstrate initial and continuous compliance with...

Code of Federal Regulations, 2013 CFR

2013-07-01

... process vents in Table 1 or 2 to this subpart. You must meet the CPMS requirements in paragraph (c) of... parameter specified in Table 5 to this subpart for each process vent control device specified in § 63.11925(b) that is used to comply with the emission limits for process vents in Table 1 or 2 to this subpart...

SU-E-T-754: Three-Dimensional Patient Modeling Using Photogrammetry for Collision Avoidance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Popple, R; Cardan, R

2015-06-15

Purpose: To evaluate photogrammetry for creating a three-dimensional patient model. Methods: A mannequin was configured on the couch of a CT scanner to simulate a patient setup using an indexed positioning device. A CT fiducial was placed on the indexed CT table-overlay at the reference index position. Two dimensional photogrammetry targets were placed on the table in known positions. A digital SLR camera was used to obtain 27 images from different positions around the CT table. The images were imported into a commercial photogrammetry package and a 3D model constructed. Each photogrammetry target was identified on 2 to 5 images.more » The CT DICOM metadata and the position of the CT fiducial were used to calculate the coordinates of the photogrammetry targets in the CT image frame of reference. The coordinates were transferred to the photogrammetry software to orient the 3D model. The mannequin setup was transferred to the treatment couch of a linear accelerator and positioned at isocenter using in-room lasers. The treatment couch coordinates were noted and compared with prediction. The collision free regions were measured over the full range of gantry and table motion and were compared with predictions obtained using a general purpose polygon interference algorithm. Results: The reconstructed 3D model consisted of 180000 triangles. The difference between the predicted and measured couch positions were 5 mm, 1 mm, and 1 mm for longitudinal, lateral, and vertical, respectively. The collision prediction tested 64620 gantry table combinations in 11.1 seconds. The accuracy was 96.5%, with false positive and negative results occurring at the boundaries of the collision space. Conclusion: Photogrammetry can be used as a tool for collision avoidance during treatment planning. The results indicate that a buffer zone is necessary to avoid false negatives at the boundary of the collision-free zone. Testing with human patients is underway. Research partially supported by a grant from Varian Medical Systems.« less

Fiscal years 2007 and 2008 : representative examples of completed RD&T projects and activities

DOT National Transportation Integrated Search

2009-06-01

The tables in this document correspond to major offices and initiatives at the Federal Highway Administration's Office of Research, Development, and Technology (RD&T), located at the Turner-Fairbank Highway Research Center. The tables provide represe...

Improved UUV Positioning Using Acoustic Communications and a Potential for Real-Time Networking and Collaboration

DTIC Science & Technology

2017-06-01

12 III. ACOUSTIC WAVE TRAVEL TIME ESTIMATION...Mission ...............................125 Table 8. Average Horizontal Distance from the UUV to the Reference Points when a Travel Time Measurement is...Taken ............................................126 Table 9. Average UUV Depth when a Travel Time Measurement is Taken .........126 Table 10. Ratio

Fabricated World Class: Global University League Tables, Status Differentiation and Myths of Global Competition

ERIC Educational Resources Information Center

David, Matthew

2016-01-01

UK media coverage of global university league tables shows systematic bias towards the Russell Group, although also highlighting tensions within its membership. Coverage positions UK "elite" institutions between US superiority and Asian ascent. Coverage claims that league table results warrant UK university funding reform. However,…

Strategies for Proximal Femoral Nailing of Unstable Intertrochanteric Fractures: Lateral Decubitus Position or Traction Table.

PubMed

Sonmez, Mesut Mehmet; Camur, Savas; Erturer, Erden; Ugurlar, Meric; Kara, Adnan; Ozturk, Irfan

2017-03-01

The aim of this prospective randomized study was to compare the traction table and lateral decubitus position techniques in the management of unstable intertrochanteric fractures. Eighty-two patients with unstable intertrochanteric fractures between 2011 and 2013 were included in this study. All patients were treated surgically with the Proximal Femoral Nail Antirotation implant (DePuy Synthes). Patients were randomized to undergo the procedure in the lateral decubitus position (42 patients) or with the use of a traction table (40 patients). Patients whose procedure was not performed entirely with a semi-invasive method or who required the use of additional fixation materials, such as cables, were excluded from the study. The groups were compared on the basis of the setup time, surgical time, fluoroscopic exposure time, tip-to-apex distance, collodiaphyseal angle, and modified Baumgaertner criteria for radiologic reduction. The setup time, surgical time, and fluoroscopic exposure time were lower and the differences were statistically significant in the lateral decubitus group compared with the traction table group. The collodiaphyseal angles were significantly different between the groups in favor of the lateral decubitus method. The tip-to-apex distance and the classification of reduction according to the modified Baumgaertner criteria did not demonstrate a statistically significant difference between the groups. The lateral decubitus position is used for most open procedures of the hip. We found that this position facilitates exposure for the surgical treatment of unstable intertrochanteric fractures and has advantages over the traction table in terms of set up time, surgical time and fluoroscopic exposure time.

Cross-Matching Source Observations from the Palomar Transient Factory (PTF)

NASA Astrophysics Data System (ADS)

Laher, Russ; Grillmair, C.; Surace, J.; Monkewitz, S.; Jackson, E.

2009-01-01

Over the four-year lifetime of the PTF project, approximately 40 billion instances of astronomical-source observations will be extracted from the image data. The instances will correspond to the same astronomical objects being observed at roughly 25-50 different times, and so a very large catalog containing important object-variability information will be the chief PTF product. Organizing astronomical-source catalogs is conventionally done by dividing the catalog into declination zones and sorting by right ascension within each zone (e.g., the USNOA star catalog), in order to facilitate catalog searches. This method was reincarnated as the "zones" algorithm in a SQL-Server database implementation (Szalay et al., MSR-TR-2004-32), with corrections given by Gray et al. (MSR-TR-2006-52). The primary advantage of this implementation is that all of the work is done entirely on the database server and client/server communication is eliminated. We implemented the methods outlined in Gray et al. for a PostgreSQL database. We programmed the methods as database functions in PL/pgSQL procedural language. The cross-matching is currently based on source positions, but we intend to extend it to use both positions and positional uncertainties to form a chi-square statistic for optimal thresholding. The database design includes three main tables, plus a handful of internal tables. The Sources table stores the SExtractor source extractions taken at various times; the MergedSources table stores statistics about the astronomical objects, which are the result of cross-matching records in the Sources table; and the Merges table, which associates cross-matched primary keys in the Sources table with primary keys in the MergedSoures table. Besides judicious database indexing, we have also internally partitioned the Sources table by declination zone, in order to speed up the population of Sources records and make the database more manageable. The catalog will be accessible to the public after the proprietary period through IRSA (irsa.ipac.caltech.edu).

Spectral detection of near-surface moisture content and water-table position in northern peatland ecosystems

Treesearch

Karl M. Meingast; Michael J. Falkowski; Evan S. Kane; Lynette R. Potvin; Brian W. Benscoter; Alistair M.S. Smith; Laura L. Bourgeau-Chavez; Mary Ellen Miller

2014-01-01

Wildland fire occurrence has been increasing in peatland ecosystems during recent decades. As such, there is a need for broadly applicable tools to detect and monitor controls on combustion such as surface peat moisture and water-table position. A field portable spectroradiometer was used to measure surface reflectance of two Sphagnum moss-dominated...

A Discovery Process for Initializing Ad Hoc Underwater Acoustic Networks

DTIC Science & Technology

2008-12-01

the ping utility packet is set to global address 0, its function becomes a broadcast ping and it elicits echoes from all neighboring nodes within...destination. At the Seaweb server, a global neighbor table and a global routing table are maintained to support network configurability. 2. Cellular...aggregates the received peer discovery data in a global neighbor table and ultimately decides how routing to each branch node should be configured

76 FR 51354 - Notice of Proposed Information Collection Requests

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-18

... Teacher Education Assistance for College and Higher Education (TEACH) Grant; and the Iraq and Afghanistan... application components, descriptions and submission methods for each are listed in Table 1. Table 1--Federal Student Aid Application Components Component Description Submission method Initial Submission of FAFSA...

A prospective, single-arm study on the use of the da Vinci® Table Motion with the Trumpf TS7000dV operating table.

PubMed

Morelli, Luca; Palmeri, Matteo; Simoncini, Tommaso; Cela, Vito; Perutelli, Alessandra; Selli, Cesare; Buccianti, Piero; Francesca, Francesco; Cecchi, Massimo; Zirafa, Cristina; Bastiani, Luca; Cuschieri, Alfred; Melfi, Franca

2018-03-30

The da Vinci® Table Motion (dVTM) comprises a combination of a unique operating table (Trumpf Medical™ TruSystem® 7000dV) capable of isocenter motion connected wirelessly with the da Vinci Xi® robotic platform, thereby enabling patients to be repositioned without removal of instruments and or undocking the robot. Between May 2015 to October 2015, the first human use of dVTM was carried out in this prospective, single-arm, post-market study in the EU, for which 40 patients from general surgery (GS), urology (U), or gynecology (G) were enrolled prospectively. Primary endpoints of the study were dVTM feasibility, efficacy, and safety. Surgeons from the three specialties obtained targeting success and the required table positioning in all cases. Table movement/repositioning was necessary to gain exposure of the operating field in 106/116 table moves (91.3%), change target in 2/116 table moves (1.7%), achieve hemodynamic relief in 4/116 table moves (3.5%), and improve external access for tumor removal in 4/116 table moves (3.5%). There was a significantly higher use of tilt and tilt plus Trendelenburg in GS group (GS vs. U p = 0.055 and GS vs. G p = 0.054). There were no dVTM safety-related or adverse events. The dVTM with TruSystem 7000dV operating table in wireless communication with the da Vinci Xi is a perfectly safe and effective synergistic combination, which allows repositioning of the patient whenever needed without imposing any delay in the execution of the operation. Moreover, it is helpful in avoiding extreme positions and enables the anesthesiologist to provide immediate and effective hemodynamic relief to the patient when needed.

Discovering Periodicity: Hands-On, Minds-On Organization of the Periodic Table by Visualizing the Unseen

ERIC Educational Resources Information Center

Selco, Jodye; Bruno, Mary; Chan, Sue

2013-01-01

Understanding how the periodic table of elements is organized and how to read information from it is fundamental for understanding chemistry. Introductory chemistry courses usually include discussions detailing what elemental information can be determined by virtue of its position on the periodic table. Although many people have been exposed to…

Environmental factors controlling methane emissions from peatlands in northern Minnesota

NASA Technical Reports Server (NTRS)

Dise, Nancy B.; Gorham, Eville; Verry, Elon S.

1993-01-01

The environmental factors affecting the emission of methane from peatlands were investigated by correlating CH4 emission data for two years, obtained from five different peatland ecosystems in northern Minnesota, with peat temperature, water table position, and degree of peat humification. The relationship obtained between the CH4 flux and these factors was compared to results from a field manipulation experiment in which the water table was artificially raised in three experimental plots within the driest peatland. It was found that peat temperature, water table position, and degree of peat humification explained 91 percent of the variance in log CH4 flux, successfully predicted annual CH4 emission from individual wetlands, and predicted the change in flux due to the water table manipulation. Raising the water table in the bog corrals by an average of 6 cm in autumn 1989 and 10 cm in summer 1990 increased CH4 emission by 2.5 and 2.2 times, respectively.

Spine surgeon's kinematics during discectomy, part II: operating table height and visualization methods, including microscope.

PubMed

Park, Jeong Yoon; Kim, Kyung Hyun; Kuh, Sung Uk; Chin, Dong Kyu; Kim, Keun Su; Cho, Yong Eun

2014-05-01

Surgeon spine angle during surgery was studied ergonomically and the kinematics of the surgeon's spine was related with musculoskeletal fatigue and pain. Spine angles varied depending on operation table height and visualization method, and in a previous paper we showed that the use of a loupe and a table height at the midpoint between the umbilicus and the sternum are optimal for reducing musculoskeletal loading. However, no studies have previously included a microscope as a possible visualization method. The objective of this study is to assess differences in surgeon spine angles depending on operating table height and visualization method, including microscope. We enrolled 18 experienced spine surgeons for this study, who each performed a discectomy using a spine surgery simulator. Three different methods were used to visualize the surgical field (naked eye, loupe, microscope) and three different operating table heights (anterior superior iliac spine, umbilicus, the midpoint between the umbilicus and the sternum) were studied. Whole spine angles were compared for three different views during the discectomy simulation: midline, ipsilateral, and contralateral. A 16-camera optoelectronic motion analysis system was used, and 16 markers were placed from the head to the pelvis. Lumbar lordosis, thoracic kyphosis, cervical lordosis, and occipital angle were compared between the different operating table heights and visualization methods as well as a natural standing position. Whole spine angles differed significantly depending on visualization method. All parameters were closer to natural standing values when discectomy was performed with a microscope, and there were no differences between the naked eye and the loupe. Whole spine angles were also found to differ from the natural standing position depending on operating table height, and became closer to natural standing position values as the operating table height increased, independent of the visualization method. When using a microscope, lumbar lordosis, thoracic kyphosis, and cervical lordosis showed no differences according to table heights above the umbilicus. This study suggests that the use of a microscope and a table height above the umbilicus are optimal for reducing surgeon musculoskeletal fatigue.

Electromagnetic tracking (EMT) technology for improved treatment quality assurance in interstitial brachytherapy.

PubMed

Kellermeier, Markus; Herbolzheimer, Jens; Kreppner, Stephan; Lotter, Michael; Strnad, Vratislav; Bert, Christoph

2017-01-01

Electromagnetic Tracking (EMT) is a novel technique for error detection and quality assurance (QA) in interstitial high dose rate brachytherapy (HDR-iBT). The purpose of this study is to provide a concept for data acquisition developed as part of a clinical evaluation study on the use of EMT during interstitial treatment of breast cancer patients. The stability, accuracy, and precision of EMT-determined dwell positions were quantified. Dwell position reconstruction based on EMT was investigated on CT table, HDR table and PDR bed to examine the influence on precision and accuracy in a typical clinical workflow. All investigations were performed using a precise PMMA phantom. The track of catheters inserted in that phantom was measured by manually inserting a 5 degree of freedom (DoF) sensor while recording the position of three 6DoF fiducial sensors on the phantom surface to correct motion influences. From the corrected data, dwell positions were reconstructed along the catheter's track. The accuracy of the EMT-determined dwell positions was quantified by the residual distances to reference dwell positions after using a rigid registration. Precision and accuracy were investigated for different phantom-table and sensor-field generator (FG) distances. The measured precision of the EMT-determined dwell positions was ≤ 0.28 mm (95th percentile). Stability tests showed a drift of 0.03 mm in the first 20 min of use. Sudden shaking of the FG or (large) metallic objects close to the FG degrade the precision. The accuracy with respect to the reference dwell positions was on all clinical tables < 1 mm at 200 mm FG distance and 120 mm phantom-table distance. Phantom measurements showed that EMT-determined localization of dwell positions in HDR-iBT is stable, precise, and sufficiently accurate for clinical assessment. The presented method may be viable for clinical applications in HDR-iBT, like implant definition, error detection or quantification of uncertainties. Further clinical investigations are needed. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

40 CFR 91.5 - Table and figure numbering; position.

Code of Federal Regulations, 2010 CFR

2010-07-01

... consecutively by order of appearance in the appendix. The table title will indicate the topic. (b) Figures for... order or appearance in the appendix. The figure title will indicate the topic. ...

Betti numbers of graded modules and cohomology of vector bundles

NASA Astrophysics Data System (ADS)

Eisenbud, David; Schreyer, Frank-Olaf

2009-07-01

In the remarkable paper Graded Betti numbers of Cohen-Macaulay modules and the multiplicity conjecture, Mats Boij and Jonas Soederberg conjectured that the Betti table of a Cohen-Macaulay module over a polynomial ring is a positive linear combination of Betti tables of modules with pure resolutions. We prove a strengthened form of their conjectures. Applications include a proof of the Multiplicity Conjecture of Huneke and Srinivasan and a proof of the convexity of a fan naturally associated to the Young lattice. With the same tools we show that the cohomology table of any vector bundle on projective space is a positive rational linear combination of the cohomology tables of what we call supernatural vector bundles. Using this result we give new bounds on the slope of a vector bundle in terms of its cohomology.

Weapon System Acquisitions: Opportunities Exist to Improve the Department of Defense’s Portfolio Management

DTIC Science & Technology

2015-08-01

Acknowledgments 55 Tables Table 1: Key Elements to Include in Portfolio Reviews and How They May Help the Portfolio Manager 9 Table 2: Key...and in some cases, potentially duplicative investments. We and others have found that leading commercial companies use portfolio management—a...law have authority to organize, train, and equip their services.5 They make initial decisions regarding what to buy, how to buy it, and how much it

Space station wardroom table

NASA Technical Reports Server (NTRS)

Cohen, Marc M. (Inventor); Kaplicky, Jan (Inventor); Nixon, David A. (Inventor)

1989-01-01

A table top for use in constricted areas has a plurality of support arms abutting at one end to form a hub. The support arms are arranged in equidistant, spaced-apart relation to each other at the ends distal to the hub. A plurality of work surface leaf sections mounted between the support arms are individually pivotable through 360 degrees about their longitudinal axes. The table top additionally has a plurality of distal leaves, each distal leaf being attached to the distal end of one of the arms. The distal leaves are pivotable between an upright position level with the support arms and a stored position below the support arms.

Automated edge finishing using an active XY table

DOEpatents

Loucks, Clifford S.; Starr, Gregory P.

1993-01-01

The disclosure is directed to an apparatus and method for automated edge finishing using hybrid position/force control of an XY table. The disclosure is particularly directed to learning the trajectory of the edge of a workpiece by "guarded moves". Machining is done by controllably moving the XY table, with the workpiece mounted thereon, along the learned trajectory with feedback from a force sensor. Other similar workpieces can be mounted, without a fixture on the XY table, located and the learned trajectory adjusted

40 CFR Table 5 to Subpart Dddd of... - Performance Testing and Initial Compliance Demonstrations for the Compliance Options and...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Table 1B to this subpart Reduce emissions of total HAP, measured as THC, by 90 percent Total HAP... 1B to this subpart Limit emissions of total HAP, measured as THC, to 20 ppmvd The average total HAP...

40 CFR Table 5 to Subpart Dddd of... - Performance Testing and Initial Compliance Demonstrations for the Compliance Options and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Table 1B to this subpart Reduce emissions of total HAP, measured as THC, by 90 percent Total HAP... 1B to this subpart Limit emissions of total HAP, measured as THC, to 20 ppmvd The average total HAP...

Estimated Depth to Ground Water and Configuration of the Water Table in the Portland, Oregon Area

USGS Publications Warehouse

Snyder, Daniel T.

2008-01-01

Reliable information on the configuration of the water table in the Portland metropolitan area is needed to address concerns about various water-resource issues, especially with regard to potential effects from stormwater injection systems such as UIC (underground injection control) systems that are either existing or planned. To help address these concerns, this report presents the estimated depth-to-water and water-table elevation maps for the Portland area, along with estimates of the relative uncertainty of the maps and seasonal water-table fluctuations. The method of analysis used to determine the water-table configuration in the Portland area relied on water-level data from shallow wells and surface-water features that are representative of the water table. However, the largest source of available well data is water-level measurements in reports filed by well constructors at the time of new well installation, but these data frequently were not representative of static water-level conditions. Depth-to-water measurements reported in well-construction records generally were shallower than measurements by the U.S. Geological Survey (USGS) in the same or nearby wells, although many depth-to-water measurements were substantially deeper than USGS measurements. Magnitudes of differences in depth-to-water measurements reported in well records and those measured by the USGS in the same or nearby wells ranged from -119 to 156 feet with a mean of the absolute value of the differences of 36 feet. One possible cause for the differences is that water levels in many wells reported in well records were not at equilibrium at the time of measurement. As a result, the analysis of the water-table configuration relied on water levels measured during the current study or used in previous USGS investigations in the Portland area. Because of the scarcity of well data in some areas, the locations of select surface-water features including major rivers, streams, lakes, wetlands, and springs representative of where the water table is at land surface were used to augment the analysis. Ground-water and surface-water data were combined for use in interpolation of the water-table configuration. Interpolation of the two representations typically used to define water-table position - depth to the water table below land surface and elevation of the water table above a datum - can produce substantially different results and may represent the end members of a spectrum of possible interpolations largely determined by the quantity of recharge and the hydraulic properties of the aquifer. Datasets of depth-to-water and water-table elevation for the current study were interpolated independently based on kriging as the method of interpolation with parameters determined through the use of semivariograms developed individually for each dataset. Resulting interpolations were then combined to create a single, averaged representation of the water-table configuration. Kriging analysis also was used to develop a map of relative uncertainty associated with the values of the water-table position. Accuracy of the depth-to-water and water-table elevation maps is dependent on various factors and assumptions pertaining to the data, the method of interpolation, and the hydrogeologic conditions of the surficial aquifers in the study area. Although the water-table configuration maps generally are representative of the conditions in the study area, the actual position of the water-table may differ from the estimated position at site-specific locations, and short-term, seasonal, and long-term variations in the differences also can be expected. The relative uncertainty map addresses some but not all possible errors associated with the analysis of the water-table configuration and does not depict all sources of uncertainty. Depth to water greater than 300 feet in the Portland area is limited to parts of the Tualatin Mountains, the foothills of the Cascade Range, and muc

What You Don't Find out about England's Educational Performance in the PISA League Table. Election Factsheet

ERIC Educational Resources Information Center

Burge, Bethan

2015-01-01

This election factsheet highlights the following points: (1) It isn't always possible to say with certainty from looking at a country's rank in the PISA educational league tables alone whether one country or economy has definitely performed better than another; (2) England's position in the league tables is dependent on which countries and…

Evaluation of BRCA1 and BRCA2 mutation prevalence, risk prediction models and a multistep testing approach in French‐Canadian families with high risk of breast and ovarian cancer

PubMed Central

Simard, Jacques; Dumont, Martine; Moisan, Anne‐Marie; Gaborieau, Valérie; Vézina, Hélène; Durocher, Francine; Chiquette, Jocelyne; Plante, Marie; Avard, Denise; Bessette, Paul; Brousseau, Claire; Dorval, Michel; Godard, Béatrice; Houde, Louis; Joly, Yann; Lajoie, Marie‐Andrée; Leblanc, Gilles; Lépine, Jean; Lespérance, Bernard; Malouin, Hélène; Parboosingh, Jillian; Pichette, Roxane; Provencher, Louise; Rhéaume, Josée; Sinnett, Daniel; Samson, Carolle; Simard, Jean‐Claude; Tranchant, Martine; Voyer, Patricia; BRCAs, INHERIT; Easton, Douglas; Tavtigian, Sean V; Knoppers, Bartha‐Maria; Laframboise, Rachel; Bridge, Peter; Goldgar, David

2007-01-01

Background and objective In clinical settings with fixed resources allocated to predictive genetic testing for high‐risk cancer predisposition genes, optimal strategies for mutation screening programmes are critically important. These depend on the mutation spectrum found in the population under consideration and the frequency of mutations detected as a function of the personal and family history of cancer, which are both affected by the presence of founder mutations and demographic characteristics of the underlying population. The results of multistep genetic testing for mutations in BRCA1 or BRCA2 in a large series of families with breast cancer in the French‐Canadian population of Quebec, Canada are reported. Methods A total of 256 high‐risk families were ascertained from regional familial cancer clinics throughout the province of Quebec. Initially, families were tested for a panel of specific mutations known to occur in this population. Families in which no mutation was identified were then comprehensively tested. Three algorithms to predict the presence of mutations were evaluated, including the prevalence tables provided by Myriad Genetics Laboratories, the Manchester Scoring System and a logistic regression approach based on the data from this study. Results 8 of the 15 distinct mutations found in 62 BRCA1/BRCA2‐positive families had never been previously reported in this population, whereas 82% carried 1 of the 4 mutations currently observed in ⩾2 families. In the subset of 191 families in which at least 1 affected individual was tested, 29% carried a mutation. Of these 27 BRCA1‐positive and 29 BRCA2‐positive families, 48 (86%) were found to harbour a mutation detected by the initial test. Among the remaining 143 inconclusive families, all 8 families found to have a mutation after complete sequencing had Manchester Scores ⩾18. The logistic regression and Manchester Scores provided equal predictive power, and both were significantly better than the Myriad Genetics Laboratories prevalence tables (p<0.001). A threshold of Manchester Score ⩾18 provided an overall sensitivity of 86% and a specificity of 82%, with a positive predictive value of 66% in this population. Conclusion In this population, a testing strategy with an initial test using a panel of reported recurrent mutations, followed by full sequencing in families with Manchester Scores ⩾18, represents an efficient test in terms of overall cost and sensitivity. PMID:16905680

Kepler Reliability and Occurrence Rates

NASA Astrophysics Data System (ADS)

Bryson, Steve

2016-10-01

The Kepler mission has produced tables of exoplanet candidates (``KOI table''), as well as tables of transit detections (``TCE table''), hosted at the Exoplanet Archive (http://exoplanetarchive.ipac.caltech.edu). Transit detections in the TCE table that are plausibly due to a transiting object are selected for inclusion in the KOI table. KOI table entries that have not been identified as false positives (FPs) or false alarms (FAs) are classified as planet candidates (PCs, Mullally et al. 2015). A subset of PCs have been confirmed as planetary transits with greater than 99% probability, but most PCs have <99% probability of being true planets. The fraction of PCs that are true transiting planets is the PC reliability rate. The overall PC population is believed to have a reliability rate >90% (Morton & Johnson 2011).

Ergonomic comparison of operating a built-in touch-pad pointing device and a trackball mouse on posture and muscle activity.

PubMed

Lee, Tzu-Hsien

2005-12-01

This study examined the effects of operating a built-in touch-pad pointing device and a trackball mouse on participants' completion times, hand positions during operation, postural angles, and muscle activities. 8 young men were asked to perform a cursor travel task on a notebook computer using both 60- and 80-cm high table conditions. Analysis showed that the trackball mouse significantly decreased completion times. Participants selected a hand position farther from the table edge and larger elbow angle for the trackball mouse than for the built-in touch-pad pointing device. Participants' neck, thoracic, and arm angles, or splenius capitis, trapezius, deltoid, and erector spinae muscle activities were not significantly affected by the devices, but table height significantly affected participants' completion times, hand positions, and postural angles.

SU-G-TeP2-04: Comprehensive Machine Isocenter Evaluation with Separation of Gantry, Collimator, and Table Variables

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hancock, S; Clements, C; Hyer, D

2016-06-15

Purpose: To develop and demonstrate application of a method that characterizes deviation of linac x-ray beams from the centroid of the volumetric radiation isocenter as a function of gantry, collimator, and table variables. Methods: A set of Winston-Lutz ball-bearing images was used to determine the gantry radiation isocenter as the midrange of deviation values resulting from gantry and collimator rotation. Also determined were displacement of table axis from gantry isocenter and recommended table axis adjustment. The method, previously reported, has been extended to include the effect of collimator walkout by obtaining measurements with 0 and 180 degree collimator rotation formore » each gantry angle. Twelve images were used to characterize the volumetric isocenter for the full range of available gantry, collimator, and table rotations. Results: Three Varian True Beam, two Elekta Infinity and four Versa HD linacs at five institutions were tested using identical methodology. Varian linacs exhibited substantially less deviation due to head sag than Elekta linacs (0.4 mm vs. 1.2 mm on average). One linac from each manufacturer had additional isocenter deviation of 0.3 to 0.4 mm due to jaw instability with gantry and collimator rotation. For all linacs, the achievable isocenter tolerance was dependent on adjustment of collimator position offset, transverse position steering, and alignment of the table axis with gantry isocenter, facilitated by these test results. The pattern and magnitude of table axis wobble vs. table angle was reproducible and unique to each machine. Conclusion: This new method provides a comprehensive set of isocenter deviation values including all variables. It effectively facilitates minimization of deviation between beam center and target (ball-bearing) position. This method was used to quantify the effect of jaw instability on isocenter deviation and to identify the offending jaw. The test is suitable for incorporation into a routine machine QA program. Software development was performed by Radiological Imaging Technology, Inc.« less

VizieR Online Data Catalog: Near-infrared observations of 84 KOI systems (Atkinson+, 2017)

NASA Astrophysics Data System (ADS)

Atkinson, D.; Baranec, C.; Ziegler, C.; Law, N.; Riddle, R.; Morton, T.

2017-06-01

The initial observations identifying companion candidates are from multiple Robo-AO observing runs on the Palomar Observatory 1.5m telescope, spanning 2012 July to September, 2013 April to October, 2014 June to September, and 2015 June. Observations were in either Sloan-i or a long-pass 600nm (LP600) filter, the latter being similar to the Kepler-bandpass when combined with the EMCCD's quantum efficiency curve for red/cool stars. The near-infrared observations are from the Near-InfraRed Camera 2 (NIRC2) instrument on the 10m Keck II telescope, conducted on 2013 June 24, August 24 and 25, 2014 August 17, 2015 July 25, and August 4 in the J, H, K, and/or Kp filters in the narrow mode of NIRC2 (9.952mas/pixel). The relative positions and raw contrast measurements of imaged companions are presented in Table4. The reduced apparent magnitudes, which use both measured contrasts and canonical apparent magnitudes of combined systems in Kepler literature, are presented in Table5. (5 data files).

Evaluation of Augmented REality Sandtable (ARES) during Sand Table Construction

DTIC Science & Technology

2018-01-01

ARL-TR-8278 ● JAN 2018 US Army Research Laboratory Evaluation of Augmented REality Sandtable ( ARES ) during Sand Table...NOTICES Disclaimers The findings in this report are not to be construed as an official Department of the Army position unless so designated by...Evaluation of Augmented REality Sandtable ( ARES ) during Sand Table Construction by Kelly S Hale and Jennifer M Riley Design Interactive

Tile-Based Fisher-Ratio Software for Improved Feature Selection Analysis of Comprehensive Two-Dimensional Gas Chromatography Time-of-Flight Mass Spectrometry Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marney, Luke C.; Siegler, William C.; Parsons, Brendon A.

Two-dimensional (2D) gas chromatography coupled with time-of-flight mass spectrometry (GC × GC – TOFMS) is a highly capable instrumental platform that produces complex and information-rich multi-dimensional chemical data. The complex data can be overwhelming, especially when many samples (of various sample classes) are analyzed with multiple injections for each sample. Thus, the data must be analyzed in such a way to extract the most meaningful information. The pixel-based and peak table-based algorithmic use of Fisher ratios has been used successfully in the past to reduce the multi-dimensional data down to those chemical compounds that are changing between classes relative tomore » those that are not (i.e., chemical feature selection). We report on the initial development of a computationally fast novel tile-based Fisher-ratio software that addresses challenges due to 2D retention time misalignment without explicitly aligning the data, which is a problem for both pixel-based and peak table- based methods. Concurrently, the tile-based Fisher-ratio software maximizes the sensitivity contrast of true positives against a background of potential false positives and noise. To study this software, eight compounds, plus one internal standard, were spiked into diesel at various concentrations. The tile-based F-ratio software was able to discover all spiked analytes, within the complex diesel sample matrix with thousands of potential false positives, in each possible concentration comparison, even at the lowest absolute spiked analyte concentration ratio of 1.06.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barnette, Daniel W.

eCo-PylotDB, written completely in Python, provides a script that parses incoming emails and prepares extracted data for submission to a database table. The script extracts the database server, the database table, the server password, and the server username all from the email address to which the email is sent. The database table is specified on the Subject line. Any text in the body of the email is extracted as user comments for the database table. Attached files are extracted as data files with each file submitted to a specified table field but in separate rows of the targeted database table.more » Other information such as sender, date, time, and machine from which the email was sent is extracted and submitted to the database table as well. An email is sent back to the user specifying whether the data from the initial email was accepted or rejected by the database server. If rejected, the return email includes details as to why.« less

40 CFR Table 8 to Subpart Wwww of... - Initial Compliance With Organic HAP Emissions Limits

Code of Federal Regulations, 2014 CFR

2014-07-01

.... open molding and centrifugal casting operations a. an organic HAP emissions limit shown in Tables 3 or... method meet the appropriate organic HAP contents. 2. open molding centrifugal casting, continuous... reduction is being claimed, are using direct die injection, and/or wet-area enclosures that meet the...

40 CFR Table 8 to Subpart Wwww of... - Initial Compliance With Organic HAP Emissions Limits

Code of Federal Regulations, 2013 CFR

2013-07-01

.... open molding and centrifugal casting operations a. an organic HAP emissions limit shown in Tables 3 or... method meet the appropriate organic HAP contents. 2. open molding centrifugal casting, continuous... reduction is being claimed, are using direct die injection, and/or wet-area enclosures that meet the...

40 CFR Table 8 to Subpart Wwww of... - Initial Compliance With Organic HAP Emissions Limits

Code of Federal Regulations, 2012 CFR

2012-07-01

.... open molding and centrifugal casting operations a. an organic HAP emissions limit shown in Tables 3 or... method meet the appropriate organic HAP contents. 2. open molding centrifugal casting, continuous... reduction is being claimed, are using direct die injection, and/or wet-area enclosures that meet the...

40 CFR Table 4 to Subpart Lllll of... - Initial Compliance With Emission Limitations

Code of Federal Regulations, 2011 CFR

2011-07-01

... auxiliary fuel achieving a THC destruction efficiency of 95.8 percent i. The THC destruction efficiency of..., and total hydrocarbon outlet concentrations over the performance test during which the THC destruction... table. c. Route the emissions to a combustion device that does not use auxiliary fuel achieving a THC...

40 CFR Table 4 to Subpart Lllll of... - Initial Compliance With Emission Limitations

Code of Federal Regulations, 2013 CFR

2013-07-01

... auxiliary fuel achieving a THC destruction efficiency of 95.8 percent i. The THC destruction efficiency of..., and total hydrocarbon outlet concentrations over the performance test during which the THC destruction... table. c. Route the emissions to a combustion device that does not use auxiliary fuel achieving a THC...

40 CFR Table 4 to Subpart Lllll of... - Initial Compliance With Emission Limitations

Code of Federal Regulations, 2010 CFR

2010-07-01

... auxiliary fuel achieving a THC destruction efficiency of 95.8 percent i. The THC destruction efficiency of..., and total hydrocarbon outlet concentrations over the performance test during which the THC destruction... table. c. Route the emissions to a combustion device that does not use auxiliary fuel achieving a THC...

40 CFR Table 4 to Subpart Lllll of... - Initial Compliance With Emission Limitations

Code of Federal Regulations, 2012 CFR

2012-07-01

... auxiliary fuel achieving a THC destruction efficiency of 95.8 percent i. The THC destruction efficiency of..., and total hydrocarbon outlet concentrations over the performance test during which the THC destruction... table. c. Route the emissions to a combustion device that does not use auxiliary fuel achieving a THC...

40 CFR Table 4 to Subpart Lllll of... - Initial Compliance With Emission Limitations

Code of Federal Regulations, 2014 CFR

2014-07-01

... auxiliary fuel achieving a THC destruction efficiency of 95.8 percent i. The THC destruction efficiency of..., and total hydrocarbon outlet concentrations over the performance test during which the THC destruction... table. c. Route the emissions to a combustion device that does not use auxiliary fuel achieving a THC...

Effect of sulfur dioxide fumigation on survival of foodborne pathogens on table grapes under standard storage temperature

USDA-ARS?s Scientific Manuscript database

We examined the persistence of Listeria monocytogenes, Escherichia coli O157:H7, and Salmonella enterica Thompson inoculated on freshly-harvested table grapes under standard cold storage with initial and weekly sulfur dioxide (SO2) fumigation. L. monocytogenes and S. enterica Thompson were much more...

Tier One Performance Screen Initial Operational Test and Evaluation: 2011 Interim Report

DTIC Science & Technology

2012-04-01

Alexandria, Virginia 22314 8 . PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES) U. S. Army Research...DISTRIBUTION OF MOS IN THE FULL SCHOOLHOUSE DATA FILE ............ 8 TABLE 2.3. BACKGROUND AND DEMOGRAPHIC CHARACTERISTICS OF THE TOPS SAMPLES...SCHOOLHOUSE SAMPLE ....................................................................................................................B-6 TABLE B. 8

40 CFR Table 7 to Subpart Eeee of... - Initial Compliance With Work Practice Standards

Code of Federal Regulations, 2011 CFR

2011-07-01

... equivalent control that meets the requirements in Table 4 to this subpart, item 1.a i. After emptying and... out a leak detection and repair program or equivalent control according to one of the subparts listed... CATEGORIES National Emission Standards for Hazardous Air Pollutants: Organic Liquids Distribution (Non...

40 CFR Table 7 to Subpart Eeee of... - Initial Compliance With Work Practice Standards

Code of Federal Regulations, 2010 CFR

2010-07-01

... equivalent control that meets the requirements in Table 4 to this subpart, item 1.a i. After emptying and... out a leak detection and repair program or equivalent control according to one of the subparts listed... CATEGORIES National Emission Standards for Hazardous Air Pollutants: Organic Liquids Distribution (Non...

Reconfigurable work station for a video display unit and keyboard

NASA Technical Reports Server (NTRS)

Shields, Nicholas L. (Inventor); Roe, Fred D., Jr. (Inventor); Fagg, Mary F. (Inventor); Henderson, David E. (Inventor)

1988-01-01

A reconfigurable workstation is described having video, keyboard, and hand operated motion controller capabilities. The workstation includes main side panels between which a primary work panel is pivotally carried in a manner in which the primary work panel may be adjusted and set in a negatively declined or positively inclined position for proper forearm support when operating hand controllers. A keyboard table supports a keyboard in such a manner that the keyboard is set in a positively inclined position with respect to the negatively declined work panel. Various adjustable devices are provided for adjusting the relative declinations and inclinations of the work panels, tables, and visual display panels.

Contributions of algae to GPP and DOC production in an Alaskan fen: effects of historical water table manipulations on ecosystem responses to a natural flood.

PubMed

Wyatt, Kevin H; Turetsky, Merritt R; Rober, Allison R; Giroldo, Danilo; Kane, Evan S; Stevenson, R Jan

2012-07-01

The role of algae in the metabolism of northern peatlands is largely unknown, as is how algae will respond to the rapid climate change being experienced in this region. In this study, we examined patterns in algal productivity, nutrients, and dissolved organic carbon (DOC) during an uncharacteristically wet summer in an Alaskan rich fen. Our sampling was conducted in three large-scale experimental plots where water table position had been manipulated (including both drying and wetting plots and a control) for the previous 4 years. This study allowed us to explore how much ecosystem memory of the antecedent water table manipulations governed algal responses to natural flooding. Despite no differences in water table position between the manipulated plots at the time of sampling, algal primary productivity was consistently higher in the lowered water table plot compared to the control or raised water table plots. In all plots, algal productivity peaked immediately following seasonal maxima in nutrient concentrations. We found a positive relationship between algal productivity and water-column DOC concentrations (r (2) = 0.85, P < 0.001). Using these data, we estimate that algae released approximately 19% of fixed carbon into the water column. Algal exudates were extremely labile in biodegradability assays, decreasing by more than 55% within the first 24 h of incubation. We suggest that algae can be an important component of the photosynthetic community in boreal peatlands and may become increasingly important for energy flow in a more variable climate with more intense droughts and flooding.

Altitude of the water table in the alluvial and other shallow aquifers along the Colorado River near La Grange, Texas, December 1980

USGS Publications Warehouse

Rettman, Paul

1981-01-01

The delineation of the water table in the alluvium of the Colorado River is fairly well defined, and 10-feet contour intervals may be interpreted with confidence in the area called ' potential lignite-mining area. ' The water table in the bedrock aquifers is more difficult to delineate with the available data; therefore, the contours are only estimates of the position of the water table in the hilly bedrock area adjacent to the Colorado River alluvium. 

Stemflow-induced processes of soil water storage

NASA Astrophysics Data System (ADS)

Germer, Sonja

2013-04-01

Compared to stemflow production studies only few studies deal with the fate of stemflow at the near-stem soil. To investigate stemflow contribution to the root zone soil moisture by young and adult babassu palms (Attalea speciosa Mart.), I studied stemflow generation, subsequent soil water percolation and root distributions. Rainfall, stemflow and perched water tables were monitored on an event basis. Perched water tables were monitored next to adult palms at two depths and three stem distances. Dye tracer experiments monitored stemflow-induced preferential flow paths. Root distributions of fine and coarse roots were related to soil water redistribution. Average rainfall-collecting area per adult palm was 6.4 m², but variability between them was high. Funneling ratios ranged between 16-71 and 4-55 for adult and young palms, respectively. Nonetheless, even very small rainfall events of 1 mm can generate stemflow. On average, 9 liters of adult palm stemflow were intercepted and stemflow tended to decrease for-high intensity rainfall events. Young babassu palms funneled rainfall via their fronds, directly to their subterranean stems. The funneling of rainfall towards adult palm stems, in contrast, led to great stemflow fluxes down to the soil and induced initial horizontal water flows through the soil, leading to perched water tables next to palms, even after small rainfall events. The perched water tables extended, however, only a few decimeters from palm stems. After perched water tables became established, vertical percolation through the soil dominated. To my knowledge, this process has not been described before, and it can be seen as an addition to the two previously described stemflow-induced processes of Horton overland flow and fast, deep percolation along roots. This study has demonstrated that Babassu palms funnel water to their stems and subsequently store it in the soil next to their stems in areas where coarse root length density is very high. This might partly explain the competitive position of babassu palms on pastures or secondary forests.

TU-CD-304-01: FEATURED PRESENTATION and BEST IN PHYSICS (THERAPY): Trajectory Modulated Arc Therapy: Development of Novel Arc Delivery Techniques Integrating Dynamic Table Motion for Extended Volume Treatments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chin, E; Hoppe, R; Million, L

2015-06-15

Purpose: Integration of coordinated robotic table motion with inversely-planned arc delivery has the potential to resolve table-top delivery limitations of large-field treatments such as Total Body Irradiation (TBI), Total Lymphoid Irradiation (TLI), and Cranial-Spinal Irradiation (CSI). We formulate the foundation for Trajectory Modulated Arc Therapy (TMAT), and using Varian Developer Mode capabilities, experimentally investigate its practical implementation for such techniques. Methods: A MATLAB algorithm was developed for inverse planning optimization of the table motion, MLC positions, and gantry motion under extended-SSD geometry. To maximize the effective field size, delivery trajectories for TMAT TBI were formed with the table rotated atmore » 270° IEC and dropped vertically to 152.5cm SSD. Preliminary testing of algorithm parameters was done through retrospective planning analysis. Robotic delivery was programmed using custom XML scripting on the TrueBeam Developer Mode platform. Final dose was calculated using the Eclipse AAA algorithm. Initial verification of delivery accuracy was measured using OSLDs on a solid water phantom of varying thickness. Results: A comparison of DVH curves demonstrated that dynamic couch motion irradiation was sufficiently approximated by static control points spaced in intervals of less than 2cm. Optimized MLC motion decreased the average lung dose to 68.5% of the prescription dose. The programmed irradiation integrating coordinated table motion was deliverable on a TrueBeam STx linac in 6.7 min. With the couch translating under an open 10cmx20cm field angled at 10°, OSLD measurements along the midline of a solid water phantom at depths of 3, 5, and 9cm were within 3% of the TPS AAA algorithm with an average deviation of 1.2%. Conclusion: A treatment planning and delivery system for Trajectory Modulated Arc Therapy of extended volumes has been established and experimentally demonstrated for TBI. Extension to other treatment techniques such as TLI and CSI is readily achievable through the developed platform. Grant Funding by Varian Medical Systems.« less

"ChemMend": A Card Game to Introduce and Explore the Periodic Table While Engaging Students' Interest

ERIC Educational Resources Information Center

Martí-Centelles, Vicente; Rubio-Magnieto, Jenifer

2014-01-01

Deep knowledge of the periodic table is one of the most important keys to understand the basic principles of Chemistry. Memorizing the elements of the groups and periods is one of the most commonly used strategies to learn the position of each element in the periodic table; nevertheless, it is a hard task for most students. The use of card games…

[Relational database for urinary stone ambulatory consultation. Assessment of initial outcomes].

PubMed

Sáenz Medina, J; Páez Borda, A; Crespo Martinez, L; Gómez Dos Santos, V; Barrado, C; Durán Poveda, M

2010-05-01

To create a relational database for monitoring lithiasic patients. We describe the architectural details and the initial results of the statistical analysis. Microsoft Access 2002 was used as template. Four different tables were constructed to gather demographic data (table 1), clinical and laboratory findings (table 2), stone features (table 3) and therapeutic approach (table 4). For a reliability analysis of the database the number of correctly stored data was gathered. To evaluate the performance of the database, a prospective analysis was conducted, from May 2004 to August 2009, on 171 stone free patients after treatment (EWSL, surgery or medical) from a total of 511 patients stored in the database. Lithiasic status (stone free or stone relapse) was used as primary end point, while demographic factors (age, gender), lithiasic history, upper urinary tract alterations and characteristics of the stone (side, location, composition and size) were considered as predictive factors. An univariate analysis was conducted initially by chi square test and supplemented by Kaplan Meier estimates for time to stone recurrence. A multiple Cox proportional hazards regression model was generated to jointly assess the prognostic value of the demographic factors and the predictive value of stones characteristics. For the reliability analysis 22,084 data were available corresponding to 702 consultations on 511 patients. Analysis of data showed a recurrence rate of 85.4% (146/171, median time to recurrence 608 days, range 70-1758). In the univariate and multivariate analysis, none of the factors under consideration had a significant effect on recurrence rate (p=ns). The relational database is useful for monitoring patients with urolithiasis. It allows easy control and update, as well as data storage for later use. The analysis conducted for its evaluation showed no influence of demographic factors and stone features on stone recurrence.

Adjusting the specificity of an engine map based on the sensitivity of an engine control parameter relative to a performance variable

DOEpatents

Jiang, Li; Lee, Donghoon; Yilmaz, Hakan; Stefanopoulou, Anna

2014-10-28

Methods and systems for engine control optimization are provided. A first and a second operating condition of a vehicle engine are detected. An initial value is identified for a first and a second engine control parameter corresponding to a combination of the detected operating conditions according to a first and a second engine map look-up table. The initial values for the engine control parameters are adjusted based on a detected engine performance variable to cause the engine performance variable to approach a target value. A first and a second sensitivity of the engine performance variable are determined in response to changes in the engine control parameters. The first engine map look-up table is adjusted when the first sensitivity is greater than a threshold, and the second engine map look-up table is adjusted when the second sensitivity is greater than a threshold.

40 CFR Table 5 to Subpart Llll of... - Summary of Reporting Requirements for New Sewage Sludge Incineration Units a

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Documentation for siting requirements. 4. Anticipated date of initial startup. § 60.4915(a). Notification of initial startup Prior to initial startup 1. Maximum design dry sewage sludge burning capacity2.... 4. Anticipated date of initial startup. 5. Site-specific monitoring plan. 6. The site-specific...

40 CFR Table 5 to Subpart Llll of... - Summary of Reporting Requirements for New Sewage Sludge Incineration Units a

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Documentation for siting requirements. 4. Anticipated date of initial startup. § 60.4915(a). Notification of initial startup Prior to initial startup 1. Maximum design dry sewage sludge burning capacity2.... 4. Anticipated date of initial startup. 5. Site-specific monitoring plan. 6. The site-specific...

40 CFR Table 5 to Subpart Sssss of... - Initial Compliance With Emission Limits

Code of Federal Regulations, 2010 CFR

2010-07-01

... continuous process unit that is subject to the THC emission concentration limit listed in item 2.a., 3.a., 4, or 5 of Table 1 to this subpart The average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen The 3-hour block average THC emission concentration measured during the performance...

40 CFR Table 5 to Subpart Sssss of... - Initial Compliance With Emission Limits

Code of Federal Regulations, 2012 CFR

2012-07-01

... continuous process unit that is subject to the THC emission concentration limit listed in item 2.a., 3.a., 4, or 5 of Table 1 to this subpart The average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen The 3-hour block average THC emission concentration measured during the performance...

40 CFR Table 5 to Subpart Sssss of... - Initial Compliance With Emission Limits

Code of Federal Regulations, 2014 CFR

2014-07-01

... continuous process unit that is subject to the THC emission concentration limit listed in item 2.a., 3.a., 4, or 5 of Table 1 to this subpart The average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen The 3-hour block average THC emission concentration measured during the performance...

40 CFR Table 5 to Subpart Sssss of... - Initial Compliance With Emission Limits

Code of Federal Regulations, 2011 CFR

2011-07-01

... continuous process unit that is subject to the THC emission concentration limit listed in item 2.a., 3.a., 4, or 5 of Table 1 to this subpart The average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen The 3-hour block average THC emission concentration measured during the performance...

40 CFR Table 5 to Subpart Sssss of... - Initial Compliance With Emission Limits

Code of Federal Regulations, 2013 CFR

2013-07-01

... continuous process unit that is subject to the THC emission concentration limit listed in item 2.a., 3.a., 4, or 5 of Table 1 to this subpart The average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen The 3-hour block average THC emission concentration measured during the performance...

78 FR 26334 - Agency Information Collection Activities; Comment Request; 2014-2015 Federal Student Aid Application

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-06

... (TEACH) Grant; and the Iraq and Afghanistan Service Grant. Federal Student Aid, an office of the U.S..., descriptions and submission methods for each are listed in Table 1. Table 1--Federal Student Aid Application Components Component Description Submission method Initial Submission of FAFSA FAFSA on the Web (FOTW...

40 CFR Table 9 to Subpart Hhhhhhh... - Procedures for Conducting Sampling of Stripped Resin and Process Wastewater

Code of Federal Regulations, 2014 CFR

2014-07-01

... Stripped Resin and Process Wastewater 9 Table 9 to Subpart HHHHHHH of Part 63 Protection of Environment... Wastewater For demonstrating . . . For the following emission points and types of processes . . . Collect.... Each process wastewater stream 3. Initial compliance N/A 1 grab sample 1 grab sample. 4. Continuous...

40 CFR Table 9 to Subpart Hhhhhhh... - Procedures for Conducting Sampling of Stripped Resin and Process Wastewater

Code of Federal Regulations, 2013 CFR

2013-07-01

... Stripped Resin and Process Wastewater 9 Table 9 to Subpart HHHHHHH of Part 63 Protection of Environment... Wastewater For demonstrating . . . For the following emission points and types of processes . . . Collect.... Each process wastewater stream 3. Initial compliance N/A 1 grab sample 1 grab sample. 4. Continuous...

Evaluating the ergonomics of a student learning environment.

PubMed

Rudolf, Michelle; Griffiths, Yolanda

2009-01-01

Ergonomics is a key consideration of a student-learning environment. This paper examines aspects of ergonomics and application to the design of tables in three classrooms at a Midwestern university. Custom tables with power outlets and Internet access via Ethernet data ports were planned for classrooms in 2000 to facilitate a laptop program. However, table height, specifically thigh clearance from the seat to the bottom of the work surface, was not fully considered. The ergonomic analysis of the classrooms by an occupational therapy student led to the implementation of positive changes to the tables. The enhancement of the learning environment influences student comfort and productivity and can offset the cost of renovating the tables.

Multi-Touch Tabletop System Using Infrared Image Recognition for User Position Identification.

PubMed

Suto, Shota; Watanabe, Toshiya; Shibusawa, Susumu; Kamada, Masaru

2018-05-14

A tabletop system can facilitate multi-user collaboration in a variety of settings, including small meetings, group work, and education and training exercises. The ability to identify the users touching the table and their positions can promote collaborative work among participants, so methods have been studied that involve attaching sensors to the table, chairs, or to the users themselves. An effective method of recognizing user actions without placing a burden on the user would be some type of visual process, so the development of a method that processes multi-touch gestures by visual means is desired. This paper describes the development of a multi-touch tabletop system using infrared image recognition for user position identification and presents the results of touch-gesture recognition experiments and a system-usability evaluation. Using an inexpensive FTIR touch panel and infrared light, this system picks up the touch areas and the shadow area of the user's hand by an infrared camera to establish an association between the hand and table touch points and estimate the position of the user touching the table. The multi-touch gestures prepared for this system include an operation to change the direction of an object to face the user and a copy operation in which two users generate duplicates of an object. The system-usability evaluation revealed that prior learning was easy and that system operations could be easily performed.

Multi-Touch Tabletop System Using Infrared Image Recognition for User Position Identification

PubMed Central

Suto, Shota; Watanabe, Toshiya; Shibusawa, Susumu; Kamada, Masaru

2018-01-01

A tabletop system can facilitate multi-user collaboration in a variety of settings, including small meetings, group work, and education and training exercises. The ability to identify the users touching the table and their positions can promote collaborative work among participants, so methods have been studied that involve attaching sensors to the table, chairs, or to the users themselves. An effective method of recognizing user actions without placing a burden on the user would be some type of visual process, so the development of a method that processes multi-touch gestures by visual means is desired. This paper describes the development of a multi-touch tabletop system using infrared image recognition for user position identification and presents the results of touch-gesture recognition experiments and a system-usability evaluation. Using an inexpensive FTIR touch panel and infrared light, this system picks up the touch areas and the shadow area of the user’s hand by an infrared camera to establish an association between the hand and table touch points and estimate the position of the user touching the table. The multi-touch gestures prepared for this system include an operation to change the direction of an object to face the user and a copy operation in which two users generate duplicates of an object. The system-usability evaluation revealed that prior learning was easy and that system operations could be easily performed. PMID:29758006

The Greenwich Photo-heliographic Results (1874 - 1976): Initial Corrections to the Printed Publications

NASA Astrophysics Data System (ADS)

Erwin, E. H.; Coffey, H. E.; Denig, W. F.; Willis, D. M.; Henwood, R.; Wild, M. N.

2013-11-01

A new sunspot and faculae digital dataset for the interval 1874 - 1955 has been prepared under the auspices of the NOAA National Geophysical Data Center (NGDC). This digital dataset contains measurements of the positions and areas of both sunspots and faculae published initially by the Royal Observatory, Greenwich, and subsequently by the Royal Greenwich Observatory (RGO), under the title Greenwich Photo-heliographic Results ( GPR) , 1874 - 1976. Quality control (QC) procedures based on logical consistency have been used to identify the more obvious errors in the RGO publications. Typical examples of identifiable errors are North versus South errors in specifying heliographic latitude, errors in specifying heliographic (Carrington) longitude, errors in the dates and times, errors in sunspot group numbers, arithmetic errors in the summation process, and the occasional omission of solar ephemerides. Although the number of errors in the RGO publications is remarkably small, an initial table of necessary corrections is provided for the interval 1874 - 1917. Moreover, as noted in the preceding companion papers, the existence of two independently prepared digital datasets, which both contain information on sunspot positions and areas, makes it possible to outline a preliminary strategy for the development of an even more accurate digital dataset. Further work is in progress to generate an extremely reliable sunspot digital dataset, based on the long programme of solar observations supported first by the Royal Observatory, Greenwich, and then by the Royal Greenwich Observatory.

40 CFR Table 3 to Subpart Cccc of... - Initial Compliance With Emission Limitations

Code of Federal Regulations, 2010 CFR

2010-07-01

... demonstrated initial compliance if . . . 1. Each fed-batch fermenter producing yeast in a fermentation stage... yeast in a fermentation stage (last (Trade), second-to-last (First Generation), or third-to-last (Stock...

Optical Measurement Center Status

NASA Technical Reports Server (NTRS)

Rodriguez, H.; Abercromby, K.; Mulrooney, M.; Barker, E.

2007-01-01

Beginning in 2005, an optical measurement center (OMC) was created to measure the photometric signatures of debris pieces. Initially, the OMC was equipped with a 300 W xenon arc lamp, a SBIG 512 x 512 ST8X MEI CCD camera with standard Johnson filters, and a Lynx 6 robotic arm with five degrees of freedom. As research progressed, modifications were made to the equipment. A customized rotary table was built to overcome the robot s limitation of 180 degree wrist rotation and provide complete 360 degree rotation with little human interaction. This change allowed an initial phase angle (source-object-camera angle) of roughly 5 degrees to be adjusted to 7, 10, 15, 18, 20, 25, or 28 degrees. Additionally, the Johnson R and I CCD filters were replaced with the standard astronomical filters suite (Bessell R,I). In an effort to reduce object saturation, the two generic aperture stops were replaced with neutral density filters. Initially data were taken with aluminum debris pieces from the European Space Operations Centre ESOC2 ground test and more recently with samples from a thermal multi-layered insulation (MLI) commonly used on rocket bodies and satellites. The ESOC2 data provided light curve analysis for one type of material but many different shapes, including flat, bent, curled, folded, and torn. The MLI samples are roughly the same size and shape, but have different surfaces that give rise to interesting photometric light curves. In addition, filter photometry was conducted on the MLI pieces, a process that also will be used on the ESOC2 samples. While obtaining light curve data an anomalous drop in intensity was observed when the table revolved through the second 180 degree rotation. Investigation revealed that the robot s wrist rotation is not reliable past 80 degrees, thus the object may be at slightly different angles at the 180 degree transition. To limit this effect, the initial rotation position begins with the object s minimal surface area facing the camera.

SU-E-I-91: Reproducibility in Prescribed Dose in AEC CT Scans Due to Table Height, Patient Size, and Localizer Acquisition Order

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winslow, J; Hurwitz, L; Christianson, O

2014-06-01

Purpose: In CT scanners, the automatic exposure control (AEC) tube current prescription depends on the acquired prescan localizer image(s). The purpose of this study was to quantify the effect that table height, patient size, and localizer acquisition order may have on the reproducibility in prescribed dose. Methods: Three phantoms were used for this study: the Mercury Phantom (comprises three tapered and four uniform regions of polyethylene 16, 23, 30, and 37 cm in diameter), acrylic sheets, and an adult anthropomorphic phantom. Phantoms were positioned per clinical protocol by our chief CT technologist or broader symmetry. Using a GE Discovery CT750HDmore » scanner, a lateral (LAT) and posterior-anterior (PA) localizer was acquired for each phantom at different table heights. AEC scan acquisitions were prescribed for each combination of phantom, localizer orientation, and table height; the displayed volume CTDI was recorded for each. Results were analyzed versus table height. Results: For the two largest Mercury Phantom section scans based on the PA localizer, the percent change in volume CTDI from ideal were at least 20% lower and 35% greater for table heights 4 cm above and 4 cm below proper centering, respectively. For scans based on the LAT localizer, the percent change in volume CTDI from ideal were no greater than 12% different for 4 cm differences in table height. The properly centered PA and LAT localizer-based volume CTDI values were within 13% of each other. Conclusion: Since uncertainty in vertical patient positioning is inherently greater than lateral positioning and because the variability in dose exceeds any dose penalties incurred, the LAT localizer should be used to precisely and reproducibly deliver the intended amount of radiation prescribed by CT protocols. CT protocols can be adjusted to minimize the expected change in average patient dose.« less

Multistage position-stabilized vibration isolation system for neutron interferometry

NASA Astrophysics Data System (ADS)

Arif, Muhammad; Brown, Dennis E.; Greene, Geoffrey L.; Clothier, R.; Littrell, K.

1994-10-01

A two stage, position stabilized vibration isolation system has been constructed and is now in operation at the Cold Neutron Research Facility of the National Institute of Standards and Technology, Gaithersburg, MD. The system employs pneumatic isolators with a multiple input/multiple output pneumatic servo system based upon pulse width modulation control loops. The first stage consists of a 40,000 kg reinforced concrete table supported by pneumatic isolators. A large environmentally isolated laboratory enclosure rests on the concrete table. The second stage consists of a 3000 kg granite optical table located within the enclosure and supported by another set of pneumatic isolators. The position of the two stages is monitored by proximity sensors and inclinometers with 12 degrees of freedom. The system controls 12 independent pneumatic airsprings. The signals from these sensors are fed into a personal computer based control system. The control system has maintained the position of the two stages to better than 1 micrometers in translation and 5 (mu) rad in orientation for a period of a few months. A description of the system and its characteristics is given.

Positioning of the patient during shoulder surgery: an inexpensive, safe and easy technique.

PubMed

Van Tongel, Alexander; Hardeman, François; Karelse, Anne; de Wilde, Lieven

2013-01-01

The knowledge of shoulder pathology has improved tremendously in the last decades, and shoulder surgery is increasingly performed because of new treatment options and better operative results. Nowadays most surgical shoulder procedures are performed in the sitting or semi-sitting (beach chair) position. Stability of the patient and the ability to flex, extend and rotate the shoulder during surgery are crucial to improve exposure of the surgical field and lower the risk of perioperative complications. We developed an easy, safe and inexpensive surgical set-up providing a very good posterior, superior and anterior access to the shoulder in the sitting or semi-sitting position. In this technique, the patient is placed supine with the head at the foot end of the table and the body positioned slightly eccentrically with the back being supported by the leg plate contralateral to the operative side, avoiding any contact with the scapula of the operative side. A neck support is attached on an extra bar at the contralateral side and accommodated to the patient's lordosis. Next, the leg plate on the operative side is removed, and the head and the body are secured to the table with adhesive dressing. This way a stable positioning of the patient is obtained during the whole procedure, and the shoulder girdle is completely free. The set-up can accommodate patients of different stature and weight without the need to adapt the technique. This position also gives the possibility to provide an excellent radiographic view of the shoulder during operative fracture treatment. Our technique further allows a significant reduction in costs. A surgical table, extra bar, additional arm support and neck support are usually available and can be used in different settings, without the need for a specific shoulder table.

A time motion study in the immunization clinic of a tertiary care hospital of kolkata, west bengal.

PubMed

Chattopadhyay, Amitabha; Ghosh, Ritu; Maji, Sucharita; Ray, Tapobroto Guha; Lahiri, Saibendu Kumar

2012-01-01

A time and motion study is used to determine the amount of time required for a specific activity, work function, or mechanical process. Few such studies have been reported in the outpatient department of institutions, and such studies based exclusively on immunization clinic of an institute is a rarity. This was an observational cross sectional study done in the immunization clinic of R.G. Kar Medical College, Kolkata, over a period of 1 month (September 2010). The study population included mother/caregivers attending the immunization clinics with their children. The total sample was 482. Pre-synchronized stopwatches were used to record service delivery time at the different activity points. Median time was the same for both initial registration table and nutrition and health education table (120 seconds), but the vaccination and post vaccination advice table took the highest percentage of overall time (46.3%). Maximum time spent on the vaccination and post vaccination advice table was on Monday (538.1 s) and nutritional assessment and health assessment table took maximum time on Friday (217.1 s). Time taken in the first half of immunization session was more in most of the tables. The goal for achieving universal immunization against vaccine-preventable diseases requires multifaceted collated response from many stakeholders. Efficient functioning of immunization clinics is therefore required to achieve the prescribed goals. This study aims to initiate an effort to study the utilization of time at a certain health care unit with the invitation of much more in depth analysis in future.

40 CFR 63.7530 - How do I demonstrate initial compliance with the emission limits and work practice standards?

Code of Federal Regulations, 2011 CFR

2011-07-01

..., Fuel Analyses, and Initial Compliance Requirements § 63.7530 How do I demonstrate initial compliance... this section, and Tables 5 and 7 to this subpart OR conducting initial fuel analyses to determine... in one of the liquid fuel subcategories that burn only fossil fuels and other gases and do not burn...

Transfection of Murine and Human Hematopoietic Progenitors with Rearranged Immunoglobulin Genes

DTIC Science & Technology

1991-01-01

fluorouracil (SFU) to eliminate most cycling progenitors. Previous studies have shown that 5FU -treatment enriches for one early progenitor with high...Table I shows a time course of SCA-I positive cell expression various times post- 5FU treatment. Table 1 clearly shows that 5FU treatment can increase...the percentage of SCA-l-positive cells to 6-7% by day 7 post- 5FU treatment. The level of SCA-I expression falls to approximately 1% of total nucleated

Nutrition Labeling and Portion Size Information on Children's Menus in Fast-Food and Table-Service Chain Restaurants in London, UK

ERIC Educational Resources Information Center

Reeves, Sue; Wake, Yvonne; Zick, Andrea

2011-01-01

Objective: To investigate meals, price, nutritional content, and nutrition and portion size information available on children's menus in fast-food and table-service chain restaurants in London, since the United Kingdom does not currently require such information but may be initiating a voluntary guideline. Methods: Children's menus were assessed…

76 FR 62678 - Table Saw Blade Contact Injuries; Advance Notice of Proposed Rulemaking; Request for Comments and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-11

... saw blade that is partially absorbed by the human body if contact is made. When this reduction in... tearing away of a part of the body), and crushings. Since its initial review of table saw blade contact... standards body only recently has begun to review requirements for a riving knife that may reduce certain...

Toxicological Assessment of ISS Air Quality: April - May 2013. [Increment 35

NASA Technical Reports Server (NTRS)

Meyers, Valerie

2013-01-01

A summary of the analytical results from 4 mini-grab sample (mGSCs) collected on ISS and returned aboard 33S is shown in Table 1. Due to the launch delay of the ATV4 resupply mission, monthly samples were reduced in April and May by omitting sampling of the Service Module in order to ensure contingency samplers were available if needed. Complete data tables of all measured concentrations and corresponding T-values based on 180-day SMACs are enclosed. detection limit for all target compounds, except m/p-xylenes and hexachloro-1, 3-butadiene was 0.025 mg/cu m. The detection limit for m/p-xylenes and hexachloro-1, 3-butadiene and all non-target compounds was 0.05 mg/cu m. The average recoveries of the 3 surrogate standards from the mGSCs were as follows: C-13-acetone, 116 +/- 12%; D-5-fluorobenzene, 117 +/- 7%; and D-5-chlorobenzene, 111 +/- 15%. Initial measured sample pressures were between 13.9 and 14.1 psia for all samples, indicating nominal sample collection. A summary of the analytical results from 3 pairs of passive-diffusion formaldehyde badges collected on ISS and returned aboard 33S is also provided in Table 1. In an effort to conserve samples due to the delay of the ATV4 resupply mission, FMK sampling was only conducted in the US Lab in May. Positive control recoveries (1 trip and 2 lab controls) were 79%, 87%, and 116% respectively.

VizieR Online Data Catalog: Binary systems among nearby dwarfs searching (Khovritchev+, 2018)

NASA Astrophysics Data System (ADS)

Khovritchev, M. Yu.; Apetyan, A. A.; Roshchina, E. A.; Izmailov, I. S.; Bikulova, D. A.; Ershova, A. P.; Balyaev, I. A.; Kulikova, A. M.; Petjur, V. V.; Shumilov, A. A.; Oskina, K. I.; Maksimova, L. A.

2018-03-01

All results are collected in three tables: saturn1m-bc.dat, saturn1m-sdss-bc.dat and sdss-bc.dat. They have the same byte-by-byte description. The tables contain the estimates of spatial parameters of binaries (rho and d_m), relative ellipticity and asymmetry index. In addition, the positions, proper motions, photometric magnitudes, parallaxes and metallicities are presented. All stars listed in these tables are binary candidates. (3 data files).

Erratum: "Photoionization Modeling of Oxygen K Absorption in the Interstellar Medium, the Chandra Grating Spectra of XTE J1817-330" (2013, Apj, 768, 60)

NASA Technical Reports Server (NTRS)

Gatuzz, E.; Garcia, J.; Mendoza, C.; Kallman, Timothy R.; Witthoeft, Michael C.; Lohfink, A.; Bautista, M. A.; Palmeri, P.; Quinet, P.

2013-01-01

In the published version of this paper, there are some minor inaccuracies in the absorption-line wavelengths listed in Table 4 as a result of a faulty reduction procedure of the Obs6615 spectrum. The shifts have been detected in a comparison with the wavelengths listed for this spectrum in the Chandra Transmission Grating Catalog and Archive (TGCat8). They are due to incorrect centroid positions of the zero-order image in both reductions as determined by the tgdetect utility which, when disentangled, yield the improved line positions of the amended Table 4 given below. It must also be pointed out that other quantitative findings of the original paper: 1. Table 5, p. 9: the column density (NH), ionization parameter, oxygen abundance of the warmabs model and the normalization and photon index of the power-law model; 2. Table 6, p. 9: the hydrogen column density of the warmabs fit; 3. Table 7, p. 9: the present oxygen equivalent widths of XTE J1817-330; and 4. Table 8, p. 10: the present oxygen column densities of XTE J1817-330 derived from both the curve of growth and warmabs model fit have been revised in the new light and are, within the estimated uncertainty ranges, in good accord with the new rendering.

Microbiota and metabolome during controlled and spontaneous fermentation of Nocellara Etnea table olives.

PubMed

Randazzo, Cinzia Lucia; Todaro, Aldo; Pino, Alessandra; Pitino, Iole; Corona, Onofrio; Caggia, Cinzia

2017-08-01

This study is aimed to investigate bacterial community and its dynamics during the fermentation of Nocellara Etnea table olives and to study its effect on metabolome formation. Six different combination of bacterial cultures (BC1-BC6) were used as starters for table olive fermentation and one additional process, conducted without addition of any starters, was used as control (C). The processes were conducted in triplicate and, overall, 21 vessels were performed at industrial scale. The fermentation was monitored for 120 days through culture-dependent and -independent approaches. Microbial counts of the main microbial groups revealed slight differences among brine samples, with the exception of LAB counts and Enterobacteriaceae, which were higher and lower, respectively, in most of the inoculated samples than the control ones. In addition, results demonstrated that the use of bacterial cultures (except the BC1), singly or in different combinations, clearly influenced the fermentation process reducing the final pH value below 4.50. When microbiota was investigated through sequencing analysis, data revealed the presence of halophilic bacteria and, among lactobacilli, the dominance of Lactobacillus plantarum group at the initial stage of fermentation, in all brine samples, except in the BC5 in which dominated Lactobacillus casei group. At 60 and 120 days of fermentation, an overturned bacterial ecology and an increase of biodiversity was observed in all samples, with the occurrence of Lactobacillus paracollinoides, Lactobacillus acidipiscis and Pediococcus parvulus. Correlation between bacterial OTU and volatile organic compounds (VOCs) revealed that, aldehydes and alcohol compounds exhibited a positive correlation with Proteobacteria, while several esters with LAB and Hafnia. In particular, esters, associated with fruity and floral notes, were positively correlated to L. paracollinoides, L. acidipiscis, and P. parvulus species. Although the VOCs amounts were sample-specific, overall aldehydes were mostly produced at the beginning of the fermentation, while acids, alcohols and esters at the end of the process. Copyright © 2017 Elsevier Ltd. All rights reserved.

A model of depressional wetland formation in low-relief karst landscapes

NASA Astrophysics Data System (ADS)

Heffernan, J. B.; Murray, A. B.; Cohen, M. J.; Martin, J. B.; Mclaughlin, D. L.; Bianchi, T. S.; Watts, A.

2014-12-01

Karst landscapes are formed by the self-reinforcing dissolution of limestone and other soluble rocks, and these positive feedbacks can create a variety of landforms depending on initial topography, climate, bedrock characteristics, and potentially, the activity of biota. In Big Cypress National Preserve (BICY), a low-relief karst landscape in southwestern FL (USA), depressional wetlands, are interspersed within an upland matrix in a regular pattern. This landscape is characterized by over-dispersion of wetland patches, periodic variation in bedrock depth and soil thickness, and distinct bi-modality of these and other soil properties. We hypothesize that the structure of the BICY landscape reflects the concurrent effects of local positive feedbacks among hydroperiod, vegetation productivity and bedrock dissolution; these local processes may ultimately be constrained by landscape scale limitations of water volume. We further hypothesize that low relief and shallow water tables are essential boundary conditions for the emergence of regular patterning of wetlands. To explore these hypotheses, we have developed a quasi-spatial model of a single nascent wetland and its catchment, where the expansion of the wetland basin is driven by acidity associated with belowground root production and aquatic metabolism and their effects on carbonate mineral dissolution, and by the lateral and vertical discharge of water between wetlands and bedrock porosity. This model can, depending on boundary conditions, recreate a range of karst features, including vertical dissolution holes, extensive wetlands that overtake the entire basin, or smaller wetlands whose size equilibrates at a small proportion of the catchment area. This last endpoint, a landform similar to those observed in BICY, occurs only in response to relatively shallow water tables, limited hydrologic inputs, and strong positive feedbacks of biotic activity on dissolution.

Analysis of Human Swing Movement and Transferring into Robot

NASA Astrophysics Data System (ADS)

Shimodaira, Jun; Amaoka, Yuki; Hamatani, Shinsuke; Takeuchi, Masahiro; Hirai, Hiroaki; Miyazaki, Fumio

Based on Generalized Motor Program, we analyzed the skill of human's table-tennis movement We hypothesized that it can be divided into arm swing and translational movements by upper and lower body movements, respectively. We expressed 3D position of the racket by only one parameter resulted from the analysis using Principal Component Analysis. Body trunk position measurement attested the lower body plays the role of keeping fixed relative-position between the ball and the body trunk at any hitting time. By applying human skills in upper and lower body movements, we could make the robot properly play table-tennis with a human.

40 CFR 63.4330 - By what date must I conduct the initial compliance demonstration?

Code of Federal Regulations, 2010 CFR

2010-07-01

... operations, the organic HAP emission rate for the initial compliance period was equal to or less than the applicable emission limit in Table 1 to this subpart and for dyeing/finishing operations, the mass fraction...

[The Relation between the Height of Radiographic Table and Workloads of Radiologic Technologist in General X-ray Examinations].

PubMed

Hattori, Akiko; Mizoguchi, Noriko; Arimura, Hisao; Fukano, Yuuichi; Umezu, Yoshiyuki; Yabuuchi, Hidetake

2015-12-01

Workloads of radiological technologists under different conditions of heights of radiographic table and/or X-ray tube assembly were calculated using a software for preventing musculoskeletal complaint to investigate optimal working environment for general X-ray examinations. In the patient positioning, compressive force of lumbar disc decreased at higher radiographic table within the range of 45-90 cm. On the other hand, workload of the shoulder joint increased with increase in the height of radiographic table. Load of the shoulder joint similarly increased as the height of the X-ray tube assembly increased. Compressive force of lumbar disc reduced by approximately 10-30% as the height ratio of the radiographic table to body height increased by approximately 40%, compared to the lowest table of 45 cm. Muscle load of a 50-years-old woman was approximately double compared to a 30-year-old man, even in the same workload. It is important to keep suitable height of radiographic table for reduction of the workloads of lumbar rather than shoulder joint, because floating-type radiographic table is generally used.

The Pythagorean table of opposites, symbolic classification, and Aristotle.

PubMed

Goldin, Owen

2015-06-01

At Metaphysics A 5 986a22-b2, Aristotle refers to a Pythagorean table, with two columns of paired opposites. I argue that 1) although Burkert and Zhmud have argued otherwise, there is sufficient textual evidence to indicate that the table, or one much like it, is indeed of Pythagorean origin; 2) research in structural anthropology indicates that the tables are a formalization of arrays of "symbolic classification" which express a pre-scientific world view with social and ethical implications, according to which the presence of a principle on one column of the table will carry with it another principle within the same column; 3) a close analysis of Aristotle's arguments shows that he thought that the table expresses real causal relationships; and 4) Aristotle faults the table of opposites with positing its principles as having universal application and with not distinguishing between those principles that are causally prior and those that are posterior. Aristotle's account of scientific explanation and his own explanations that he developed in accordance with this account are in part the result of his critical encounter with this prescientific Pythagorean table.

League tables and school effectiveness: a mathematical model.

PubMed Central

Hoyle, Rebecca B; Robinson, James C

2003-01-01

'School performance tables', an alphabetical list of secondary schools along with aggregates of their pupils' performances in national tests, have been published in the UK since 1992. Inevitably, the media have responded by publishing ranked 'league tables'. Despite concern over the potentially divisive effect of such tables, the current government has continued to publish this information in the same form. The effect of this information on standards and on the social make-up of the community has been keenly debated. Since there is no control group available that would allow us to investigate this issue directly, we present here a simple mathematical model. Our results indicate that, while random fluctuations from year to year can cause large distortions in the league-table positions, some schools still establish themselves as 'desirable'. To our surprise, we found that 'value-added' tables were no more accurate than tables based on raw exam scores, while a different method of drawing up the tables, in which exam results are averaged over a period of time, appears to give a much more reliable measure of school performance. PMID:12590748

A Simple Probabilistic Model for Estimating the Risk of Standard Air Dives

DTIC Science & Technology

2004-12-01

Decompression Models Table Al. Decompression Table Based on the StandAir Model and Comparison with the VVaI-1 8 Algorithm. A-l-A-4 Table A2. The VVaI-1 8...cannot be as strong as might be desired - especially for dives with long TDTs. Comparisons of the positions of the dive-outcome symbols with the... comparisons for several depth/bottom-time combinations. The three left-hand panels, for dives with short bottom times, show that the crossover point

48 CFR 17.106-1 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., preproduction engineering, initial rework, initial spoilage, pilot runs, allocable portions of the costs of... should obtain in-house engineering cost estimates identifying the detailed recurring and nonrecurring... cancellation. For example, consider that the total nonrecurring costs (see 15.408, Table 15-2, Formats for...

48 CFR 17.106-1 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., preproduction engineering, initial rework, initial spoilage, pilot runs, allocable portions of the costs of... should obtain in-house engineering cost estimates identifying the detailed recurring and nonrecurring... cancellation. For example, consider that the total nonrecurring costs (see 15.408, Table 15-2, Formats for...

48 CFR 17.106-1 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., preproduction engineering, initial rework, initial spoilage, pilot runs, allocable portions of the costs of... should obtain in-house engineering cost estimates identifying the detailed recurring and nonrecurring... cancellation. For example, consider that the total nonrecurring costs (see 15.408, Table 15-2, Formats for...

The Construction of Interculturality: A Study of Initial Encounters between Japanese and American Students.

ERIC Educational Resources Information Center

Mori, Junko

2003-01-01

Investigates how Japanese and American students initiate topical talk as they get acquainted with each other during their initial encounter at a student-organized conversation table. Looks at the observable and reportable ways in which the participants demonstrate the relevance, or the irrelevance, of interculturality in the development of the…

40 CFR Table 4 to Subpart Eeee of... - Summary of Reporting Requirements

Code of Federal Regulations, 2010 CFR

2010-07-01

.... Waste management plan; and § 60.2952. v. Anticipated date of initial startup. § 60.2952. 2. Startup notification a. Prior to initial startup i. Types of waste to be burned;ii. Maximum design waste burning... petition for site-specific operating limits; and § 60.2953. v. Anticipated date of initial startup. § 60...

40 CFR Table 4 to Subpart Eeee of... - Summary of Reporting Requirements

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Waste management plan; and § 60.2952. v. Anticipated date of initial startup. § 60.2952. 2. Startup notification a. Prior to initial startup i. Types of waste to be burned;ii. Maximum design waste burning... petition for site-specific operating limits; and § 60.2953. v. Anticipated date of initial startup. § 60...

40 CFR Table 4 to Subpart Eeee of... - Summary of Reporting Requirements

Code of Federal Regulations, 2011 CFR

2011-07-01

.... Waste management plan; and § 60.2952. v. Anticipated date of initial startup. § 60.2952. 2. Startup notification a. Prior to initial startup i. Types of waste to be burned;ii. Maximum design waste burning... petition for site-specific operating limits; and § 60.2953. v. Anticipated date of initial startup. § 60...

40 CFR Table 4 to Subpart Eeee of... - Summary of Reporting Requirements

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Waste management plan; and § 60.2952. v. Anticipated date of initial startup. § 60.2952. 2. Startup notification a. Prior to initial startup i. Types of waste to be burned;ii. Maximum design waste burning... petition for site-specific operating limits; and § 60.2953. v. Anticipated date of initial startup. § 60...

40 CFR Table 4 to Subpart Eeee of... - Summary of Reporting Requirements

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Waste management plan; and § 60.2952. v. Anticipated date of initial startup. § 60.2952. 2. Startup notification a. Prior to initial startup i. Types of waste to be burned;ii. Maximum design waste burning... petition for site-specific operating limits; and § 60.2953. v. Anticipated date of initial startup. § 60...

40 CFR 63.7822 - What test methods and other procedures must I use to demonstrate initial compliance with the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... must I use to demonstrate initial compliance with the emission limits for particulate matter? 63.7822... demonstrate initial compliance with the emission limits for particulate matter? (a) You must conduct each... applicable emission limit for particulate matter in Table 1 to this subpart, follow the test methods and...

40 CFR 63.7822 - What test methods and other procedures must I use to demonstrate initial compliance with the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... must I use to demonstrate initial compliance with the emission limits for particulate matter? 63.7822... demonstrate initial compliance with the emission limits for particulate matter? (a) You must conduct each... applicable emission limit for particulate matter in Table 1 to this subpart, follow the test methods and...

Management of Hip Fractures in Lateral Position without a Fracture Table.

PubMed

Pahlavanhosseini, Hamid; Valizadeh, Sima; Banadaky, Seyyed Hossein Saeed; Karbasi, Mohammad H Akhavan; Abrisham, Seyed Mohammad J; Fallahzadeh, Hossein

2014-09-01

Hip fracture Management in supine position on a fracture table with biplane fluoroscopic views has some difficulties which leads to prolongation of surgery and increasing x- rays' dosage. The purpose of this study was to report the results and complications of hip fracture management in lateral position on a conventional operating table with just anteroposterior fluoroscopic view. 40 hip fractures (31 trochanteric and 9 femoral neck fractures) were operated in lateral position between Feb 2006 and Oct 2012. Age, gender, fracture classification, operation time, intra-operation blood loss, reduction quality, and complications were extracted from patients' medical records. The mean follow-up time was 30.78±22.73 months (range 4-83). The mean operation time was 76.50 ± 16.88 min (range 50 - 120 min).The mean intra-operative blood loss was 628.75 ± 275.00 ml (range 250-1300ml). Anatomic and acceptable reduction was observed in 95%of cases. The most important complications were malunion (one case in trochanteric group), avascular necrosis of femoral head and nonunion (each one case in femoral neck group). It sounds that reduction and fixation of hip fractures in lateral position with fluoroscopy in just anteroposterior view for small rural hospitals may be executable and probably safe.

Management of Hip Fractures in Lateral Position without a Fracture Table

PubMed Central

Pahlavanhosseini, Hamid; Valizadeh, Sima; Banadaky, Seyyed Hossein Saeed; Karbasi, Mohammad H Akhavan; Abrisham, Seyed Mohammad J; Fallahzadeh, Hossein

2014-01-01

Background: Hip fracture Management in supine position on a fracture table with biplane fluoroscopic views has some difficulties which leads to prolongation of surgery and increasing x- rays' dosage. The purpose of this study was to report the results and complications of hip fracture management in lateral position on a conventional operating table with just anteroposterior fluoroscopic view. Methods: 40 hip fractures (31 trochanteric and 9 femoral neck fractures) were operated in lateral position between Feb 2006 and Oct 2012. Age, gender, fracture classification, operation time, intra-operation blood loss, reduction quality, and complications were extracted from patients' medical records. The mean follow-up time was 30.78±22.73 months (range 4-83). Results: The mean operation time was 76.50 ± 16.88 min (range 50 - 120 min).The mean intra-operative blood loss was 628.75 ± 275.00 ml (range 250-1300ml). Anatomic and acceptable reduction was observed in 95%of cases. The most important complications were malunion (one case in trochanteric group), avascular necrosis of femoral head and nonunion (each one case in femoral neck group). Conclusions: It sounds that reduction and fixation of hip fractures in lateral position with fluoroscopy in just anteroposterior view for small rural hospitals may be executable and probably safe. PMID:25386577

Where to place the positive muon in the Periodic Table?

PubMed

Goli, Mohammad; Shahbazian, Shant

2015-03-14

In a recent study it was suggested that the positively charged muon is capable of forming its own "atoms in molecules" (AIM) in the muonic hydrogen-like molecules, composed of two electrons, a muon and one of the hydrogen's isotopes, thus deserves to be placed in the Periodic Table [Phys. Chem. Chem. Phys., 2014, 16, 6602]. In the present report, the capacity of the positively charged muon in forming its own AIM is considered in a large set of molecules replacing muons with all protons in the hydrides of the second and third rows of the Periodic Table. Accordingly, in a comparative study the wavefunctions of both sets of hydrides and their muonic congeners are first derived beyond the Born-Oppenheimer (BO) paradigm, assuming protons and muons as quantum waves instead of clamped particles. Then, the non-BO wavefunctions are used to derive the AIM structures of both hydrides and muonic congeners within the context of the multi-component quantum theory of atoms in molecules. The results of the analysis demonstrate that muons are generally capable of forming their own atomic basins and the properties of these basins are not fundamentally different from those AIM containing protons. Particularly, the bonding modes in the muonic species seem to be qualitatively similar to their congener hydrides and no new bonding model is required to describe the bonding of muons to a diverse set of neighboring atoms. All in all, the positively charged muon is similar to a proton from the structural and bonding viewpoint and deserves to be placed in the same box of hydrogen in the Periodic Table. This conclusion is in line with a large body of studies on the chemical kinetics of the muonic molecules portraying the positively charged muon as a lighter isotope of hydrogen.

Life-table methods for detecting age-risk factor interactions in long-term follow-up studies.

PubMed

Logue, E E; Wing, S

1986-01-01

Methodological investigation has suggested that age-risk factor interactions should be more evident in age of experience life tables than in follow-up time tables due to the mixing of ages of experience over follow-up time in groups defined by age at initial examination. To illustrate the two approaches, age modification of the effect of total cholesterol on ischemic heart disease mortality in two long-term follow-up studies was investigated. Follow-up time life table analysis of 116 deaths over 20 years in one study was more consistent with a uniform relative risk due to cholesterol, while age of experience life table analysis was more consistent with a monotonic negative age interaction. In a second follow-up study (160 deaths over 24 years), there was no evidence of a monotonic negative age-cholesterol interaction by either method. It was concluded that age-specific life table analysis should be used when age-risk factor interactions are considered, but that both approaches yield almost identical results in absence of age interaction. The identification of the more appropriate life-table analysis should be ultimately guided by the nature of the age or time phenomena of scientific interest.

40 CFR Table 8 to Subpart Wwww of... - Initial Compliance With Organic HAP Emissions Limits

Code of Federal Regulations, 2010 CFR

2010-07-01

... SOURCE CATEGORIES National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastic... organic HAP emissions limit . . . You have demonstrated initial complianceif . . . 1. open molding and... contents. 2. open molding centrifugal casting, continuous lamination/casting, SMC and BMC manufacturing...

26 CFR 301.6721-0 - Table of Contents.

Code of Federal Regulations, 2011 CFR

2011-04-01

... TINs. (1) In general. (i) Initial solicitation. (ii) First annual solicitation. (iii) Second annual.... (f) Acting in a responsible manner—special rules for incorrect TINs. (1) In general. (i) Initial...) In general. (2) Special rules relating to TINs. (3) Effective dates. (h) Transitional rules for...

26 CFR 301.6721-0 - Table of Contents.

Code of Federal Regulations, 2010 CFR

2010-04-01

... TINs. (1) In general. (i) Initial solicitation. (ii) First annual solicitation. (iii) Second annual.... (f) Acting in a responsible manner—special rules for incorrect TINs. (1) In general. (i) Initial...) In general. (2) Special rules relating to TINs. (3) Effective dates. (h) Transitional rules for...

78 FR 34895 - Safety Zone; San Francisco Independence Day Fireworks Display, San Francisco Bay, San Francisco, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-11

...'49'' N, 122[deg]24'46'' W (NAD 83). Pursuant to 33 CFR 165.1191, Table 1, Item number 8, this safety... position 37[deg]48'38'' N, 122[deg]25'28'' W (NAD 83). Pursuant to 33 CFR 165.1191, Table 1, Item number 8...

The Camp Pendleton Experiment in Battalion Level Field Feeding

DTIC Science & Technology

1976-07-01

regard to the scrambled egg component. The only positive rating received on the MCI was for the fruit component. 3. Consumers located at the remote sites...and (2) redesign to prevent liquid items, like scrambled egg mix, from running down the grease drain. Steam Tables The steam tables were designed to

Employment Opportunities for Family Members in Germany.

DTIC Science & Technology

1983-05-24

30 V . NEW INITIATIVES TO IMPROVE FAMILY MEMBER EMPLOYMENT OPPORTUNITIES ........ ...................... . 40 VI. OBSERVATIONS AND COMMENTS...I, II, V Local National Hire 9.94% 2.5% 6.52% 1.93% 12.07% NOTES 1. CONUS Hire Fringe Benefits include overseas unique estimated costs outlined in...from a survey of ODCSRM FY81 vouchers . 19 TABLE 3-4 FY83 GENERAL SCHEDULE CONUS HIRE CIVILIAN COST FACTORS This table provides cost factors for

Dynamics of Flexible MLI-type Debris for Accurate Orbit Prediction

DTIC Science & Technology

2014-09-01

sets usually are classical orbital elements , or Keplerian elements illustrated in Fig. 3. Fig. 3. Orbital elements ... elements in Table 2, for 10 orbits . Orbit of the objects is simulated by equation (3.9) and set the initial equation in Table 2. Gravitational...depending upon the parameters selected and the orbit to be propagated. For this reason, other sets of elements were defined and used in the

40 CFR 63.7510 - What are my initial compliance requirements and by what date must I conduct them?

Code of Federal Regulations, 2010 CFR

2010-07-01

... for each type of fuel burned in your boiler or process heater according to § 63.7521 and Table 6 to... conducting CMS performance evaluations according to § 63.7525. For affected sources that burn a single type... each type of fuel burned in your boiler or process heater according to § 63.7521 and Table 6 to this...

40 CFR 63.7510 - What are my initial compliance requirements and by what date must I conduct them?

Code of Federal Regulations, 2011 CFR

2011-07-01

... for each type of fuel burned in your boiler or process heater according to § 63.7521 and Table 6 to... conducting CMS performance evaluations according to § 63.7525. For affected sources that burn a single type... each type of fuel burned in your boiler or process heater according to § 63.7521 and Table 6 to this...

40 CFR 63.7510 - What are my initial compliance requirements and by what date must I conduct them?

Code of Federal Regulations, 2012 CFR

2012-07-01

... for each type of fuel burned in your boiler or process heater according to § 63.7521 and Table 6 to... conducting CMS performance evaluations according to § 63.7525. For affected sources that burn a single type... each type of fuel burned in your boiler or process heater according to § 63.7521 and Table 6 to this...

ART OF THE POSSIBLE: SECURING AIR FORCE SPACE COMMAND MISSION SYSTEMS FOR THE WARFIGHTER

DTIC Science & Technology

2016-10-23

Initiation (Adversarial)…….…17 Table 2. Assessment Scale-Likelihood of Threat Event Occurrence ( Non -Adversarial).17 Table 3. Assessment Scale...action to thwart the attacks from adversarial nation states and non -state actors alike. While there are numerous cybersecurity concerns, or non ...compliant cybersecurity controls across all weapon systems, not all non -compliant controls contribute equally to the cyber-attack surface and overall

Process Synchronization and Data Communication between Processes in Real Time Local Area Networks.

DTIC Science & Technology

1985-12-01

52 APPENDIX A: PROCEDURE MAKETABLE .............. 54 APPENDIX B: PROCEDURE MAKEMESSAGE ............. 56 APPENDIX C: PROCEDURE...item. The relation table is built by the driver during system initialization by the procedure maketable , see Appendix A. This procedure reads the file... MAKETABLE Procedure maketable is the first procedure called by the driver. It sets up the relation table in local RAM of SBC 1 by reading the information

Elucidation of the Mechanisms and Environmental Relevance of cis-Dichloroethene and Vinyl Chloride Biodegradation

DTIC Science & Technology

2012-11-01

in iTRAQ study Table 3-12: Ratio of aldehyde and alcohol dehydrogenases from iTRAQ study Table 3-13: Proteins involved in proposed glyoxal...pathway for cDCE degradation proceeds through chloro-, or dichloroacetaldehyde. Multiple aldehyde dehydrogenases are annotated in the genome of...dichloroacetaldehyde is a fortuitous reaction. However, if the initial reaction is monooxygenation to an aldehyde then the true intermediate would be

Rating Correlations Between Customs Codes and Export Control Lists: Assessing the Needs and Challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chatelus, Renaud; Heine, Pete

Correlation tables are the linchpins between the customs codes used to classify commodities in international trade and the control lists used for strategic trade control (STC) purposes. While understanding the customs classification system can help the STC community better understand strategic trade flows, better identify which trade operations require permits, and more effectively detect illegal exports, the two systems are different in scope, philosophy, content, and objectives. Many indications point to the limitations of these correlation tables, and it is important to understand the nature of the limitations and the complex underlying reasons to conceive possible improvements. As part ofmore » its Strategic Trade and Supply Chain Analytics Initiative, Argonne National Laboratory supported a study of a subset of the European Union’s TARIC correlation table. The study included development of a methodology and an approach to rating the quality and relevance of individual correlations. The study was intended as a first step to engage the STC community in deflections and initiatives to improve the conception and use of correlations, and its conclusions illustrate the scope and complex nature of the challenges to overcome. This paper presents the two classification systems, analyzes the needs for correlation tables and the complex challenges associated with them, summarizes key findings, and proposes possible ways forward.« less

Environmental and physical controls on northern terrestrial methane emissions across permafrost zones

USGS Publications Warehouse

Olefeldt, David; Turetsky, Merritt R.; Crill, Patrick M.; McGuire, A. David

2013-01-01

Methane (CH4) emissions from the northern high-latitude region represent potentially significant biogeochemical feedbacks to the climate system. We compiled a database of growing-season CH4 emissions from terrestrial ecosystems located across permafrost zones, including 303 sites described in 65 studies. Data on environmental and physical variables, including permafrost conditions, were used to assess controls on CH4 emissions. Water table position, soil temperature, and vegetation composition strongly influenced emissions and had interacting effects. Sites with a dense sedge cover had higher emissions than other sites at comparable water table positions, and this was an effect that was more pronounced at low soil temperatures. Sensitivity analysis suggested that CH4 emissions from ecosystems where the water table on average is at or above the soil surface (wet tundra, fen underlain by permafrost, and littoral ecosystems) are more sensitive to variability in soil temperature than drier ecosystems (palsa dry tundra, bog, and fen), whereas the latter ecosystems conversely are relatively more sensitive to changes of the water table position. Sites with near-surface permafrost had lower CH4 fluxes than sites without permafrost at comparable water table positions, a difference that was explained by lower soil temperatures. Neither the active layer depth nor the organic soil layer depth was related to CH4 emissions. Permafrost thaw in lowland regions is often associated with increased soil moisture, higher soil temperatures, and increased sedge cover. In our database, lowland thermokarst sites generally had higher emissions than adjacent sites with intact permafrost, but emissions from thermokarst sites were not statistically higher than emissions from permafrost-free sites with comparable environmental conditions. Overall, these results suggest that future changes to terrestrial high-latitude CH4 emissions will be more proximately related to changes in moisture, soil temperature, and vegetation composition than to increased availability of organic matter following permafrost thaw.

40 CFR Table 7 to Subpart Ggg of... - Wastewater-Inspection and Monitoring Requirements for Waste Management Units

Code of Federal Regulations, 2010 CFR

2010-07-01

... or monitoring Method TANKS: 63.1256(b)(3)(i) Inspect fixed roof and all openings for leaks Initially... openings for leaks Initially Semiannually Visual. 63.1256(c)(2) Inspect surface impoundment for control....1256(d)(1)(ii) Inspect cover and all openings for leaks Initially Semiannually Visual. 63.1256(d)(3)(i...

40 CFR Table 11 to Subpart G of... - Wastewater-Inspection and Monitoring Requirements for Waste Management Units

Code of Federal Regulations, 2010 CFR

2010-07-01

... openings for leaks Initially Semi-annually Visual. 63.133(c) Inspect floating roof in accordance with §§ 63.... Surface impoundments: 63.134(b)(1) Inspect cover and all openings for leaks Initially Semi-annually Visual... for leaks Initially Semi-annually Visual. 63.135(d)(1) Inspect enclosure and all openings for leaks...

40 CFR 63.9915 - What test methods and other procedures must I use to demonstrate initial compliance with dioxin...

Code of Federal Regulations, 2010 CFR

2010-07-01

... must I use to demonstrate initial compliance with dioxin/furan emission limits? 63.9915 Section 63.9915....9915 What test methods and other procedures must I use to demonstrate initial compliance with dioxin... limit for dioxins/furans in Table 1 to this subpart, you must follow the test methods and procedures...

An ergonomic study of the optimum operating table height for laparoscopic surgery.

PubMed

Berquer, R; Smith, W D; Davis, S

2002-03-01

Laparoscopic surgery requires the use of longer instruments than open surgery, thus changing the relation between the height of the surgeon's hands and the desirable height of the operating room table. The optimum height of the operating room table for laparoscopic surgery is investigated in this study. Twenty-one surgeons performed a two-handed, one-fourth circle cutting task using a laparoscopic video system and laparoscopic instruments positioned at five instrument handle heights relative to subjects' elbow height (-20, -10, 0, +10, and +20 cm) by adjusting the height of the trainer box. Subjects rated the difficulty and discomfort experienced during each task on a visual analog scale. Skin conductance (SC) was measured in Micromhos via paired surface electrodes placed near the ulnar edge of the palm of the right (cutting) hand. The mean electromyographic (EMG) signal from the right deltoid and trapezius muscles was measured. Arm orientation was measured in three dimensions using a magnetometer/accelerometer. Signals were acquired using analog circuitry and digitally sampled using a National Instruments DAQCard 700 connected to a Macintosh PowerBook 5300c running LabVIEW software. Statistical analysis was carried out by analysis of variance and post hoc testing. Statistically significant changes were found in the subjective rating of discomfort (p <0.002), deltoid EMG (p <0.0006), trapezius EMG (p <0.0001), and arm elevation (p <0.0001) between instrument handle heights. SC values and task times did not change significantly. Discomfort and difficulty ratings were lowest when instrument handles were positioned at elbow height. EMG values and arm elevation all decreased with lower instrument height. This study suggests that the optimum table height for laparoscopic surgery should position the laparoscopic instrument handles close to surgeons' elbow level to minimize discomfort and upper arm and shoulder muscle work. This corresponds to an approximate table height of 64 to 77 cm above floor level. A redesign of current operating room tables may be required to meet these ergonomic guidelines.

Effect of water table dynamics on land surface hydrologic memory

NASA Astrophysics Data System (ADS)

Lo, Min-Hui; Famiglietti, James S.

2010-11-01

The representation of groundwater dynamics in land surface models has received considerable attention in recent years. Most studies have found that soil moisture increases after adding a groundwater component because of the additional supply of water to the root zone. However, the effect of groundwater on land surface hydrologic memory (persistence) has not been explored thoroughly. In this study we investigate the effect of water table dynamics on National Center for Atmospheric Research Community Land Model hydrologic simulations in terms of land surface hydrologic memory. Unlike soil water or evapotranspiration, results show that land surface hydrologic memory does not always increase after adding a groundwater component. In regions where the water table level is intermediate, land surface hydrologic memory can even decrease, which occurs when soil moisture and capillary rise from groundwater are not in phase with each other. Further, we explore the hypothesis that in addition to atmospheric forcing, groundwater variations may also play an important role in affecting land surface hydrologic memory. Analyses show that feedbacks of groundwater on land surface hydrologic memory can be positive, negative, or neutral, depending on water table dynamics. In regions where the water table is shallow, the damping process of soil moisture variations by groundwater is not significant, and soil moisture variations are mostly controlled by random noise from atmospheric forcing. In contrast, in regions where the water table is very deep, capillary fluxes from groundwater are small, having limited potential to affect soil moisture variations. Therefore, a positive feedback of groundwater to land surface hydrologic memory is observed in a transition zone between deep and shallow water tables, where capillary fluxes act as a buffer by reducing high-frequency soil moisture variations resulting in longer land surface hydrologic memory.

Elk browsing increases aboveground growth of water-stressed willows by modifying plant architecture.

PubMed

Johnston, Danielle B; Cooper, David J; Hobbs, N Thompson

2007-12-01

In the northern elk wintering range of Yellowstone National Park, USA, wolf (Canis lupus) removal allowed elk (Cervus elaphus) to overbrowse riparian woody plants, leading to the exclusion of beaver (Castor canadensis) and a subsequent water table decline in many small stream valleys. Reduced elk browsing following wolf reintroduction may or may not facilitate willow (Salix sp.) recovery in these areas. To determine if the effect of elk browsing on willow interacts with that of beaver abandonment, we manipulated elk browsing and the water table in a factorial experiment. Under the condition of an ambient (low) water table, elk browsing increased shoot water potential (Psis), photosynthesis per unit leaf area (A), stomatal conductance per unit leaf area (gs), and aboveground current annual growth (CAG) by 50%. Elk browsing occurred entirely during dormancy and did not affect total plant leaf area (L). Improved water balance, photosynthetic rate, and annual aboveground productivity in browsed willows appeared to be due to morphological changes, such as increased shoot diameter and decreased branching, which typically increase plant hydraulic conductivity. An elevated water table increased Psis, A, gs, CAG, and L, and eliminated or lessened the positive effect of browsing on CAG for most species. Because low water tables create conditions whereby high willow productivity depends on the morphological effects of annual elk browsing, removing elk browsing in areas of water table decline is unlikely to result in vigorous willow stands. As large willow standing crops are required by beaver, a positive feedback between water-stressed willow and beaver absence may preclude the reestablishment of historical conditions. In areas with low water table, willow restoration may depend on actions to promote the re-establishment of beaver in addition to reducing elk browsing.

40 CFR 90.318 - Oxides of nitrogen analyzer calibration.

Code of Federal Regulations, 2010 CFR

2010-07-01

... chemiluminescent oxides of nitrogen analyzer as described in this section. (b) Initial and Periodic Interference... and periodic calibration. Prior to its initial use and monthly thereafter, or within one month prior... following table). Example calibration points (%) Acceptable for calibration? 20, 30, 40, 50, 60, 70 No...

40 CFR 91.318 - Oxides of nitrogen analyzer calibration.

Code of Federal Regulations, 2011 CFR

2011-07-01

... nitrogen analyzer as described in this section. (b) Initial and periodic interference. Prior to its... is required. (c) Initial and periodic calibration. Prior to its introduction into service, and... 80 percent of the 10 to 90 percent range (64 percent) is required (see following table). Example...

40 CFR 91.318 - Oxides of nitrogen analyzer calibration.

Code of Federal Regulations, 2013 CFR

2013-07-01

... nitrogen analyzer as described in this section. (b) Initial and periodic interference. Prior to its... is required. (c) Initial and periodic calibration. Prior to its introduction into service, and... 80 percent of the 10 to 90 percent range (64 percent) is required (see following table). Example...

40 CFR 90.318 - Oxides of nitrogen analyzer calibration.

Code of Federal Regulations, 2011 CFR

2011-07-01

... chemiluminescent oxides of nitrogen analyzer as described in this section. (b) Initial and Periodic Interference... and periodic calibration. Prior to its initial use and monthly thereafter, or within one month prior... following table). Example calibration points (%) Acceptable for calibration? 20, 30, 40, 50, 60, 70 No...

40 CFR 91.318 - Oxides of nitrogen analyzer calibration.

Code of Federal Regulations, 2010 CFR

2010-07-01

... nitrogen analyzer as described in this section. (b) Initial and periodic interference. Prior to its... is required. (c) Initial and periodic calibration. Prior to its introduction into service, and... 80 percent of the 10 to 90 percent range (64 percent) is required (see following table). Example...

40 CFR 90.318 - Oxides of nitrogen analyzer calibration.

Code of Federal Regulations, 2013 CFR

2013-07-01

... chemiluminescent oxides of nitrogen analyzer as described in this section. (b) Initial and Periodic Interference... and periodic calibration. Prior to its initial use and monthly thereafter, or within one month prior... following table). Example calibration points (%) Acceptable for calibration? 20, 30, 40, 50, 60, 70 No...

Variably-saturated groundwater modeling for optimizing managed aquifer recharge using trench infiltration

USGS Publications Warehouse

Heilweil, Victor M.; Benoit, Jerome; Healy, Richard W.

2015-01-01

Spreading-basin methods have resulted in more than 130 million cubic meters of recharge to the unconfined Navajo Sandstone of southern Utah in the past decade, but infiltration rates have slowed in recent years because of reduced hydraulic gradients and clogging. Trench infiltration is a promising alternative technique for increasing recharge and minimizing evaporation. This paper uses a variably saturated flow model to further investigate the relative importance of the following variables on rates of trench infiltration to unconfined aquifers: saturated hydraulic conductivity, trench spacing and dimensions, initial water-table depth, alternate wet/dry periods, and number of parallel trenches. Modeling results showed (1) increased infiltration with higher hydraulic conductivity, deeper initial water tables, and larger spacing between parallel trenches, (2) deeper or wider trenches do not substantially increase infiltration, (3) alternating wet/dry periods result in less overall infiltration than keeping the trenches continuously full, and (4) larger numbers of parallel trenches within a fixed area increases infiltration but with a diminishing effect as trench spacing becomes tighter. An empirical equation for estimating expected trench infiltration rates as a function of hydraulic conductivity and initial water-table depth was derived and can be used for evaluating feasibility of trench infiltration in other hydrogeologic settings

Cutting assembly

DOEpatents

Racki, Daniel J.; Swenson, Clark E.; Bencloski, William A.; Wineman, Arthur L.

1984-01-01

A cutting apparatus includes a support table mounted for movement toward and away from a workpiece and carrying a mirror which directs a cutting laser beam onto the workpiece. A carrier is rotatably and pivotally mounted on the support table between the mirror and workpiece and supports a conduit discharging gas toward the point of impingement of the laser beam on the workpiece. Means are provided for rotating the carrier relative to the support table to place the gas discharging conduit in the proper positions for cuts made in different directions on the workpiece.

Rapid Response of Hydrological Loss of DOC to Water Table Drawdown and Warming in Zoige Peatland: Results from a Mesocosm Experiment

PubMed Central

Lou, Xue-Dong; Zhai, Sheng-Qiang; Kang, Bing; Hu, Ya-Lin; Hu, Li-Le

2014-01-01

A large portion of the global carbon pool is stored in peatlands, which are sensitive to a changing environment conditions. The hydrological loss of dissolved organic carbon (DOC) is believed to play a key role in determining the carbon balance in peatlands. Zoige peatland, the largest peat store in China, is experiencing climatic warming and drying as well as experiencing severe artificial drainage. Using a fully crossed factorial design, we experimentally manipulated temperature and controlled the water tables in large mesocosms containing intact peat monoliths. Specifically, we determined the impact of warming and water table position on the hydrological loss of DOC, the exported amounts, concentrations and qualities of DOC, and the discharge volume in Zoige peatland. Our results revealed that of the water table position had a greater impact on DOC export than the warming treatment, which showed no interactive effects with the water table treatment. Both DOC concentration and discharge volume were significantly increased when water table drawdown, while only the DOC concentration was significantly promoted by warming treatment. Annual DOC export was increased by 69% and 102% when the water table, controlled at 0 cm, was experimentally lowered by −10 cm and −20 cm. Increases in colored and aromatic constituents of DOC (measured by Abs254 nm, SUVA254 nm, Abs400 nm, and SUVA400 nm) were observed under the lower water tables and at the higher peat temperature. Our results provide an indication of the potential impacts of climatic change and anthropogenic drainage on the carbon cycle and/or water storage in a peatland and simultaneously imply the likelihood of potential damage to downstream ecosystems. Furthermore, our results highlight the need for local protection and sustainable development, as well as suggest that more research is required to better understand the impacts of climatic change and artificial disturbances on peatland degradation. PMID:25369065

Rapid response of hydrological loss of DOC to water table drawdown and warming in Zoige peatland: results from a mesocosm experiment.

PubMed

Lou, Xue-Dong; Zhai, Sheng-Qiang; Kang, Bing; Hu, Ya-Lin; Hu, Li-Le

2014-01-01

A large portion of the global carbon pool is stored in peatlands, which are sensitive to a changing environment conditions. The hydrological loss of dissolved organic carbon (DOC) is believed to play a key role in determining the carbon balance in peatlands. Zoige peatland, the largest peat store in China, is experiencing climatic warming and drying as well as experiencing severe artificial drainage. Using a fully crossed factorial design, we experimentally manipulated temperature and controlled the water tables in large mesocosms containing intact peat monoliths. Specifically, we determined the impact of warming and water table position on the hydrological loss of DOC, the exported amounts, concentrations and qualities of DOC, and the discharge volume in Zoige peatland. Our results revealed that of the water table position had a greater impact on DOC export than the warming treatment, which showed no interactive effects with the water table treatment. Both DOC concentration and discharge volume were significantly increased when water table drawdown, while only the DOC concentration was significantly promoted by warming treatment. Annual DOC export was increased by 69% and 102% when the water table, controlled at 0 cm, was experimentally lowered by -10 cm and -20 cm. Increases in colored and aromatic constituents of DOC (measured by Abs(254 nm), SUVA(254 nm), Abs(400 nm), and SUVA(400 nm)) were observed under the lower water tables and at the higher peat temperature. Our results provide an indication of the potential impacts of climatic change and anthropogenic drainage on the carbon cycle and/or water storage in a peatland and simultaneously imply the likelihood of potential damage to downstream ecosystems. Furthermore, our results highlight the need for local protection and sustainable development, as well as suggest that more research is required to better understand the impacts of climatic change and artificial disturbances on peatland degradation.

Red-Edge Spectral Reflectance as an Indicator of Surface Moisture Content in an Alaskan Peatland Ecosystem

NASA Astrophysics Data System (ADS)

McPartland, M.; Kane, E. S.; Turetsky, M. R.; Douglass, T.; Falkowski, M. J.; Montgomery, R.; Edwards, J.

2015-12-01

Arctic and boreal peatlands serve as major reservoirs of terrestrial organic carbon (C) because Net Primary Productivity (NPP) outstrips C loss from decomposition over long periods of time. Peatland productivity varies as a function of water table position and surface moisture content, making C storage in these systems particularly vulnerable to the climate warming and drying predicted for high latitudes. Detailed spatial knowledge of how aboveground vegetation communities respond to changes in hydrology would allow for ecosystem response to environmental change to be measured at the landscape scale. This study leverages remotely sensed data along with field measurements taken at the Alaska Peatland Experiment (APEX) at the Bonanza Creek Long Term Ecological Research site to examine relationships between plant solar reflectance and surface moisture. APEX is a decade-long experiment investigating the effects of hydrologic change on peatland ecosystems using water table manipulation treatments (raised, lowered, and control). Water table levels were manipulated throughout the 2015 growing season, resulting in a maximum separation of 35 cm between raised and lowered treatment plots. Water table position, soil moisture content, depth to seasonal ice, soil temperature, photosynthetically active radiation (PAR), CO2 and CH4 fluxes were measured as predictors of C loss through decomposition and NPP. Vegetation was surveyed for percent cover of plant functional types. Remote sensing data was collected during peak growing season, when the separation between treatment plots was at maximum difference. Imagery was acquired via a SenseFly eBee airborne platform equipped with a Canon S110 red-edge camera capable of detecting spectral reflectance from plant tissue at 715 nm band center to within centimeters of spatial resolution. Here, we investigate empirical relationships between spectral reflectance, water table position, and surface moisture in relation to peat carbon balance.

A Study on Improving Defense Acquisition through the Application of Defense Acquisition Workforce Improvement Act (DAWIA) Concept to Defense Industry Workforce

DTIC Science & Technology

2009-09-01

Executive CAIV Cost As an Independent Variable CAP Critical Acquisition Position CAPM Certified Associate in Project Management CCCM Certified...Professionals (PMP)............................33 b. Certified Associate in Project Management ( CAPM )............34 c. Program Management...34 Table 6. CAPM Requirements (After PMI CAPM , 2009). ...........................................34 Table 7

40 CFR Table 8 to Subpart Wwww of... - Initial Compliance With Organic HAP Emissions Limits

Code of Federal Regulations, 2011 CFR

2011-07-01

... organic HAP emissions limit . . . You have demonstrated initial complianceif . . . 1. open molding and... contents. 2. open molding centrifugal casting, continuous lamination/casting, SMC and BMC manufacturing... die injection, and/or wet-area enclosures that meet the criteria of § 63.5830. 6. pultrusion...

40 CFR Table 3 to Subpart Cccc of... - Initial Compliance With Emission Limitations

Code of Federal Regulations, 2011 CFR

2011-07-01

... CATEGORIES National Emission Standards for Hazardous Air Pollutants: Manufacturing of Nutritional Yeast Part... demonstrated initial compliance if . . . 1. Each fed-batch fermenter producing yeast in a fermentation stage... yeast in a fermentation stage (last (Trade), second-to-last (First Generation), or third-to-last (Stock...

40 CFR Table 9 to Subpart Wwww of... - Initial Compliance With Work Practice Standards

Code of Federal Regulations, 2010 CFR

2010-07-01

... have demonstrated initial compliance if . . . 1. a new or existing closed molding operation using... adding materials, and materials are recovered after slitting. 2. a new or existing cleaning operation not...-containing materials storage operation keep containers that store HAP-containing materials closed or covered...

Seven Ways to Kill RTI

ERIC Educational Resources Information Center

Noll, Brandi

2013-01-01

The Response to Intervention initiative is in danger of failing and being thrown on the ash heaps of countless education reform initiatives, but not because it is poorly structured, rather on account of poor implementation. Among the implementation mistakes are seven that can be watched for and avoided. (Contains 3 tables.)

77 FR 59897 - Initiation of Five-Year (“Sunset”) Review

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-01

... 20, 1998) and 70 FR 62061 (October 28, 2005). Guidance on methodological or analytical issues....218(c), we are initiating Sunset Reviews of the following antidumping duty orders: DOC Case No. ITC Case No. Country Product Department contact A-570-868 731-TA-932 China Folding Metal Tables Jennifer...

Performance Optimization of the NASA Large Civil Tiltrotor

DTIC Science & Technology

2008-07-01

Continuous Power MRP Maximum Rated Power (take-off power) OEI One Engine Inoperative OGE Out of Ground Effect SFC Specific Fuel Consumption SLS Sea...for the LCTR2 based on a service entry date of 2018. Table 1 summarizes the nominal mission, and Table 2 lists key design values (the initial values...Aeroflightdynamics Directorate (AFDD), RDECOM (Ref. 4). RC designs are based upon a physics- based synthesis process calibrated to a database of

Plasma Thruster Development: Magnetoplasmadynamic Propulsion, Status and Basic Problems.

DTIC Science & Technology

1986-02-01

34 9 Sublimation Rates vs. Temperature for Typical Electrode Materials 65 10 Time to Reach Melting vs. Surface Heat Load (One-Dimensional, Large Area...Approx.) for Different Electrode Materials and Initial Temperatures 75 V LIST OF TABLES TABLE PAGE I Models of Thruster Types (with approximation (1...much higher specific impulse values than the minimum must be achieved in order to obtain acceptable effi- Sciencies , e.g. for 30% efficiency with argon

Elucidation of the Mechanisms and Environmental Relevance of cis-Dichloroethene and Vinyl Chloride Biodegradation

DTIC Science & Technology

2012-11-01

iTRAQ study Table 3-12: Ratio of aldehyde and alcohol dehydrogenases from iTRAQ study Table 3-13: Proteins involved in proposed glyoxal transformation...pathway for cDCE degradation proceeds through chloro-, or dichloroacetaldehyde. Multiple aldehyde dehydrogenases are annotated in the genome of JS666...is a fortuitous reaction. However, if the initial reaction is monooxygenation to an aldehyde then the true intermediate would be

A naturalistic study of the directional interpretation process of discrete emotions during high-stakes table tennis matches.

PubMed

Martinent, Guillaume; Ferrand, Claude

2009-06-01

The purpose of this study was to explore the directional interpretation process of discrete emotions experienced by table tennis players during competitive matches by adopting a naturalistic qualitative video-assisted approach. Thirty self-confrontation interviews were conducted with 11 national table tennis players (2 or 3 matches per participants). Nine discrete emotions were identified through the inductive analyses of the participants' transcriptions: anger, anxiety, discouragement, disappointment, disgust, joy, serenity, relief, and hope. Inductive analyses revealed the emergence of 4 categories and 13 themes among the 9 discrete emotions: positive direction (increased concentration, increased motivation, increased confidence, positive sensations, and adaptive behaviors), negative direction (decreased concentration, decreased motivation, too confident, decreased confidence, negative sensations, and maladaptive behaviors), neutral direction (take more risk and take less risk), and no perceived influence on own performance. Results are discussed in terms of current research on directional interpretation and emotions in sport.

Application of gamma imaging techniques for the characterisation of position sensitive gamma detectors

NASA Astrophysics Data System (ADS)

Habermann, T.; Didierjean, F.; Duchêne, G.; Filliger, M.; Gerl, J.; Kojouharov, I.; Li, G.; Pietralla, N.; Schaffner, H.; Sigward, M.-H.

2017-11-01

A device to characterize position-sensitive germanium detectors has been implemented at GSI. The main component of this so called scanning table is a gamma camera that is capable of producing online 2D images of the scanned detector by means of a PET technique. To calibrate the gamma camera Compton imaging is employed. The 2D data can be processed further offline to obtain depth information. Of main interest is the response of the scanned detector in terms of the digitized pulse shapes from the preamplifier. This is an important input for pulse-shape analysis algorithms as they are in use for gamma tracking arrays in gamma spectroscopy. To validate the scanning table, a comparison of its results with a second scanning table implemented at the IPHC Strasbourg is envisaged. For this purpose a pixelated germanium detector has been scanned.

Efficacy of Monitoring Patient’s Position during Neurosurgical Procedures: Introduction of Real-time Display and Record

PubMed Central

HASEGAWA, Mitsuhiro; NOURI, Mohsen; FUJISAWA, Hironori; HAYASHI, Yutaka; INAMASU, Joji; HIROSE, Yuichi; YAMASHITA, Junkoh

2015-01-01

There are many reports on position-related complications in neurosurgical literature but so far, continuous quantification of the patient’s position during the surgery has not been reported. This study aims to explore the utility of a new surgical table system and its software in displaying the patient’s body positions during surgery on real-time basis. More than 200 neurosurgical cases were monitored for their positions intra-operatively. The position was digitally recorded and could be seen by all the members in the operating team. It also displayed the three-dimensional relationship between the head and the heart positions. No position-related complications were observed during the study. The system was able to serve as an excellent indicator for monitoring the patient’s position. The recordings were analyzed and even used to reproduce or improve the position in the subsequent operations. The novel technique of monitoring the position of the head and the heart of the patients and the operating table planes are considered to be useful during delicate neurosurgical procedures thereby, preventing inadvertent procedural errors. This can be used to quantify various surgical positions in the future and define safety measures accordingly. PMID:25797776

Efficacy of monitoring patient's position during neurosurgical procedures: introduction of real-time display and record.

PubMed

Hasegawa, Mitsuhiro; Nouri, Mohsen; Fujisawa, Hironori; Hayashi, Yutaka; Inamasu, Joji; Hirose, Yuichi; Yamashita, Junkoh

2015-01-01

There are many reports on position-related complications in neurosurgical literature but so far, continuous quantification of the patient's position during the surgery has not been reported. This study aims to explore the utility of a new surgical table system and its software in displaying the patient's body positions during surgery on real-time basis. More than 200 neurosurgical cases were monitored for their positions intra-operatively. The position was digitally recorded and could be seen by all the members in the operating team. It also displayed the three-dimensional relationship between the head and the heart positions. No position-related complications were observed during the study. The system was able to serve as an excellent indicator for monitoring the patient's position. The recordings were analyzed and even used to reproduce or improve the position in the subsequent operations. The novel technique of monitoring the position of the head and the heart of the patients and the operating table planes are considered to be useful during delicate neurosurgical procedures thereby, preventing inadvertent procedural errors. This can be used to quantify various surgical positions in the future and define safety measures accordingly.

40 CFR Table 5 to Subpart Zzzz of... - Initial Compliance With Emission Limitations and Operating Limitations

Code of Federal Regulations, 2010 CFR

2010-07-01

... demonstrated initial compliance if . . . 1. 2SLB and 4SLB stationary RICE >500 HP located at a major source and new or reconstructed CI stationary RICE >500 HP located at a major source a. Reduce CO emissions and... initial performance test. 2. 2SLB and 4SLB stationary RICE >500 HP located at a major source and new or...

Evaluation of the Performance Driven Budget Initiative of the New York City Board of Education (September 1998-August 1999). Second Annual Report.

ERIC Educational Resources Information Center

Siegel, Dorothy; Zurer, Erica; Fruchter, Norm

This report reviews the second-year implementation of the New York City public school system's Performance Driven Budget (PDB) initiative. The Galaxy budgeting system that is part of the PDB initiative generates a school's budget from its table of organization, and then derives district and Central budgets by aggregating all school budgets. After…

40 CFR Table 2 to Subpart Rrr of... - Summary of Operating Requirements for New and Existing Affected Sources and Emission Units

Code of Federal Regulations, 2011 CFR

2011-07-01

... with fabric filter Bag leak detector or Initiate corrective action within 1-hr of alarm and complete in... operation Operate in accordance with OM&M plan. b Bag leak detector or Initiate corrective action within 1... accordance with OM&M plan. b Dross-only furnace with fabric filter Bag leak detector or Initiate corrective...

Evaluating Air Force Expeditionary Nursing -- Are We Prepared?

DTIC Science & Technology

2007-12-07

Performance Initials Date Initials MURT; Inservices ; USAMRIID/USAMRC ID training programs; AFMAM(1) 44-156 Treatment of Biological Warfare Agent...ii Background………..………………………….…………………………………………...1 How WHMC’s EMEDS Nurses Are Currently Being Trained …………………...3 Informal Evaluation of Training ...9 Table II. READI Tool…………………….…………………………………………………...16 Table III. Training Requirements vs. Gaps Based on Readiness Dimensions…………………24

Diversity and enumeration of halophilic and alkaliphilic bacteria in Spanish-style green table-olive fermentations.

PubMed

Lucena-Padrós, Helena; Ruiz-Barba, José Luis

2016-02-01

The presence and enumeration of halophilic and alkaliphilic bacteria in Spanish-style table-olive fermentations was studied. Twenty 10-tonne fermenters at two large manufacturing companies in Spain, previously studied through both culture dependent and independent (PCR-DGGE) methodologies, were selected. Virtually all this microbiota was isolated during the initial fermentation stage. A total of 203 isolates were obtained and identified based on 16S rRNA gene sequences. They belonged to 13 bacterial species, included in 11 genera. It was noticeable the abundance of halophilic and alkaliphilic lactic acid bacteria (HALAB). These HALAB belonged to the three genera of this group: Alkalibacterium, Marinilactibacillus and Halolactibacillus. Ten bacterial species were isolated for the first time from table olive fermentations, including the genera Amphibacillus, Natronobacillus, Catenococcus and Streptohalobacillus. The isolates were genotyped through RAPD and clustered in a dendrogram where 65 distinct strains were identified. Biodiversity indexes found statistically significant differences between both patios regarding genotype richness, diversity and dominance. However, Jaccard similarity index suggested that the halophilic/alkaliphilic microbiota in both patios was more similar than the overall microbiota at the initial fermentation stage. Thus, up to 7 genotypes of 6 different species were shared, suggesting adaptation of some strains to this fermentation stage. Morisita-Horn similarity index indicated a high level of codominance of the same species in both patios. Halophilic and alkaliphilic bacteria, especially HALAB, appeared to be part of the characteristic microbiota at the initial stage of this table-olive fermentation, and they could contribute to the conditioning of the fermenting brines in readiness for growth of common lactic acid bacteria. Copyright © 2015 Elsevier Ltd. All rights reserved.

Hydrologic processes governing near surface saturation of alpine wetlands in the Canadian Rockies

NASA Astrophysics Data System (ADS)

Westbrook, C.; Mercer, J.

2016-12-01

Alpine wetlands are vital for habitat, biodiversity, carbon cycling and water storage, but little is known about their hydrologic condition. Climate trends toward smaller mountain snowpacks that melt earlier are thought to pose a threat to the continued provision of alpine wetland ecological functions, and their existence, as it is believed they derive their water mainly from snowmelt. Our objective was to determine the hydrologic processes governing near surface saturation in alpine wetlands. We monitored the water table dynamics of three alpine wetlands in contrasting hydrogeomorphic landscape positions for two summers in Banff National Park, Canada. We concurrently monitored water balance components, and analyzed soil properties and source water geochemistry. Despite very different snow conditions between the two study years, water tables remained near the surface and relatively stable in both years, indicating wetlands are more hydrologically buffered from snowpack variations than expected. We did not find convincing evidence of hydrogeomorphic position influencing wetland water table dynamics. Instead, peat thickness seemed to be critical in regulating water table as the wetland with the thickest peat soil (>1 m) maintained water tables closest to the ground surface for the longest period of time. Thicker peat deposits may develop under convergent hydrologic flow path conditions. Our results indicate that alpine wetlands are more resilient to shifting environmental conditions than previously reported.

High-precision control of LSRM based X-Y table for industrial applications.

PubMed

Pan, J F; Cheung, Norbert C; Zou, Yu

2013-01-01

The design of an X-Y table applying direct-drive linear switched reluctance motor (LSRM) principle is proposed in this paper. The proposed X-Y table has the characteristics of low cost, simple and stable mechanical structure. After the design procedure is introduced, an adaptive position control method based on online parameter identification and pole-placement regulation scheme is developed for the X-Y table. Experimental results prove the feasibility and its priority over a traditional PID controller with better dynamic response, static performance and robustness to disturbances. It is expected that the novel two-dimensional direct-drive system find its applications in high-precision manufacture area. Copyright © 2012 ISA. Published by Elsevier Ltd. All rights reserved.

SU-G-IeP2-05: Effect of Localizer Type and Patient Off-Centering On CT Radiation Dose with Use of Automatic Tube Current Modulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruan, C; Sodickson, A; Hamberg, L

2016-06-15

Purpose: Apparent patient size in CT localizers varies with localizer type and patient positioning, resulting in variation in effective mAs as guided by Tube Current Modulation (TCM). Our aim was to investigate the effects of vertical off-centering on CTDI-vol when using different localizer types and TCM strengths. Methods: A CTDI body phantom was scanned using an abdominal protocol with three TCM strengths (Siemens Definition AS40, CAREDose4D; very weak, average, very strong). Data was acquired at 11 table height positions; with phantom center at isocenter and at 10 other positions between 142mm below and 53mm above. At each position, scans weremore » acquired using 5 different localizer types: PA, AP, Lateral, PA+Lateral, and Lateral+PA. CTDI-vol was recorded for the 165 combinations of table height, localizer type, and TCM strength, and magnification factors measured from localizer images. Results: Magnification factors from AP and PA localizers ranged from 0.79–1.11 and 1.35–0.91, respectively from lowest to highest positions (highest with phantom located closest to X-ray tube), with a smaller impact when using Lateral, PA+Lateral, Lateral+PA localizer types, all of which behaved similarly. For an average TCM strength and PA localizer, CTDI-vol ranged from 75% higher to 12% lower than the isocenter value for the lowest to highest table positions, respectively. For table positions ranging from lowest to highest, CTDI-vol ranged from −23% to 17% for AP, from −8% to 0.3% for lateral and from −7% to 1% for a combination of PA and Lateral in either order. Similar behavior was found for different TCM strengths, but effects were more pronounced for very strong compared with very weak modulation strengths. Conclusion: Patient off-centering substantially impacts radiation dose, which depends on the amount of vertical offcentering and type of the localizer used. The combination of PA and Lateral localizers is most robust against effects of patient off-centering.« less

Scapular resting position, shoulder pain and function in disabled athletes.

PubMed

Aytar, Aydan; Zeybek, Aslican; Pekyavas, Nihan Ozunlu; Tigli, Ayca Aytar; Ergun, Nevin

2015-10-01

Despite the fact that the number of disabled individuals participating in sports is increasing, there are only sparse reports in the literature concerning overuse injuries. The purpose of this study was to compare scapular resting position, shoulder pain, and function in wheelchair basketball, amputee soccer, and disabled table tennis players. Descriptive study. A total of 63 disabled players from amputee soccer, wheelchair basketball, and disabled table tennis participated in our study. Scapular resting position was taken as primary outcome; pain and function were taken as secondary outcome measurements. Scapular resting position was evaluated with Lateral Scapular Slide Test. Visual Analog Scale was used for evaluating shoulder pain intensity. Quick disabilities of the arm, shoulder, and hand questionnaire were used to assess upper extremity function. There was a significant difference in shoulder pain, function, and scapular resting position in all groups (p < 0.05). Paired comparisons between amputee soccer and wheelchair basketball players and also amputee soccer and disabled table tennis showed difference for all measurement parameters (p < 0.05). When the results are evaluated, it may be stated that amputee soccer players have better scapular resting position than other sports. Crutch usage may not negatively affect scapular resting position and perceived function as much as wheelchair usage. Exercise techniques for shoulder and resting position could be included in training programs of disabled athletes. Wheelchair/crutch usage is a risk, and special exercise techniques for shoulder and dyskinesis could be included in training programs to prevent injury. However, it may not just be important for wheelchair athletes, it may also be important for amputee soccer players. In particular, total upper extremity evaluations and exercises could be added within exercise programs. © The International Society for Prosthetics and Orthotics 2014.

Understanding drivers of peatland extracellular enzyme activity in the PEATcosm experiment: mixed evidence for enzymic latch hypothesis

Treesearch

Karl J. Romanowicz; Evan S. Kane; Lynette R. Potvin; Aleta L. Daniels; Randy Kolka; Erik A. Lilleskov

2015-01-01

Aims. Our objective was to assess the impacts of water table position and plant functional groups on peatland extracellular enzyme activity (EEA) framed within the context of the enzymic latch hypothesis. Methods. We utilized a full factorial experiment with 2 water table (WT) treatments (high and low) and 3 plant functional...

Disadvantaged Children and Their First School Experiences. ETS-Head Start Longitudinal Study: Preliminary Description of the Initial Sample Prior to School Enrollment. A Report in Two Volumes: Volume 2--Tables.

ERIC Educational Resources Information Center

Educational Testing Service, Princeton, NJ.

As part of its 6-year longitudinal study designed to assess the impact of Head Start, Educational Testing Service (ETS) has summarized and compiled tables of data collected on 16 of the 33 instruments administered to children in 1969 in three sites (St. Louis, Missouri; Trenton, New Jersey; and Portland, Oregon). Data from the parent interview and…

40 CFR 60.1875 - What must I include in my initial report?

Code of Federal Regulations, 2010 CFR

2010-07-01

... in table 2 or 4 of this subpart): (1) Dioxins/furans. (2) Cadmium. (3) Lead. (4) Mercury. (5) Opacity... particulate matter control device. Use values established during your initial stack test for dioxins/furans... carbon to control dioxins/furans or mercury emissions, the average carbon feed rates that you recorded...

IRIS Toxicological Review of Hexahydro-1,3,5-trinitro-1,3,5 ...

EPA Pesticide Factsheets

In August 2013, EPA released the draft literature searches and associated search strategies, evidence tables, and exposure response arrays for RDX to obtain input from stakeholders and the public prior to developing the draft IRIS assessment. Specifically, EPA was interested in comments on the following: Draft literature search strategies The approach for identifying studies The screening process for selecting pertinent studies The resulting list of pertinent studies Preliminary evidence tables The process for selecting studies to include in evidence tables The quality of the studies in the evidence tables The literature search strategy, which describes the processes for identifying scientific literature, contains the studies that EPA considered and selected to include in the evidence tables. The preliminary evidence tables and exposure-response arrays present the key study data in a standardized format. The evidence tables summarize the available critical scientific literature. The exposure-response figures provide a graphical representation of the responses at different levels of exposure for each study in the evidence table. The U.S. EPA is conducting a new health assessment of RDX that will appear on the Agency's online database, the Integrated Risk Information System (IRIS). IRIS is an EPA database containing Agency scientific positions on potential adverse human health effects that may result

50 CFR Table 8 to Part 680 - Initial QS and PQS Pool for Each Crab QS Fishery

Code of Federal Regulations, 2011 CFR

2011-10-01

... Crab QS Fishery Crab QS Fishery Initial QS Pool Initial PQS Pool BBR Bristol Bay red king crab 400,000... 200,000,000 PIK Pribilof Islands red and blue king crab 30,000,000 30,000,000 SMB St. Matthew blue... Western Aleutian Islands red king crab 60,000,000 60,000,000 WBT Western Bering Sea Tanner crab (C. bairdi...

50 CFR Table 8 to Part 680 - Initial QS and PQS Pool for Each Crab QS Fishery

Code of Federal Regulations, 2010 CFR

2010-10-01

... Crab QS Fishery Crab QS Fishery Initial QS Pool Initial PQS Pool BBR Bristol Bay red king crab 400,000... 200,000,000 PIK Pribilof Islands red and blue king crab 30,000,000 30,000,000 SMB St. Matthew blue... Western Aleutian Islands red king crab 60,000,000 60,000,000 WBT Western Bering Sea Tanner crab (C. bairdi...

[Treatment of recurrent neurocardiogenic syncope with cardiac inhibitors with ipratropium bromide].

PubMed

Friederich, H-C; Michaelsen, J; Hesse, C; Schellberg, D; Schwab, M; Herzog, W

2004-06-01

Pharmacological approaches for the treatment of cardioinhibitory vasovagal syncope are controversially discussed in the literature. In acute treatment of neurocardiogenic syncope, anticholinergics (atropine) are used effectively. Randomised and placebo-controlled clinical trials evaluating the preventive significance of anticholinergic agents in the therapy of cardioinhibitory vasovagal syncope are still missing. We report the case of an 18-year-old male patient with recurrent convulsive, cardioinhibitory neurocardiogenic syncope. Vasovagal syncope occurred predominantly as centrally induced syncope triggered by negative emotions such as fear or by seeing blood. Under resting conditions, the patient revealed increased parasympathetic tone with nocturnal bradycardia of 38 beats/min. In the course of head-up tilt table testing a cardioinhibitory syncope with an asystolic pause of 10 seconds occurred without any prodromes after 10 minutes of upright positioning. In order to inhibit parasympathetic tone, medication with ipratropiumbromide was initiated. Time-variant analysis of heart rate variability (autoregressive model) during head-up tilt table testing showed under the medication with ipratropiumbromide a vagal mediated cardioinhibition to 56 beats/min, but no further sinus arrest. Throughout clinical follow-up of 6 months the patient remained syncope-free under the medication. The usefulness of ipratropiumbromide in inhibiting vagal mediated cardioinhibition will be discussed referring to the case report and to studies evaluating anticholinergic agents in the treatment of neurocardiogenic syncope.

Design of a self-adaptive fuzzy PID controller for piezoelectric ceramics micro-displacement system

NASA Astrophysics Data System (ADS)

Zhang, Shuang; Zhong, Yuning; Xu, Zhongbao

2008-12-01

In order to improve control precision of the piezoelectric ceramics (PZT) micro-displacement system, a self-adaptive fuzzy Proportional Integration Differential (PID) controller is designed based on the traditional digital PID controller combining with fuzzy control. The arithmetic gives a fuzzy control rule table with the fuzzy control rule and fuzzy reasoning, through this table, the PID parameters can be adjusted online in real time control. Furthermore, the automatic selective control is achieved according to the change of the error. The controller combines the good dynamic capability of the fuzzy control and the high stable precision of the PID control, adopts the method of using fuzzy control and PID control in different segments of time. In the initial and middle stage of the transition process of system, that is, when the error is larger than the value, fuzzy control is used to adjust control variable. It makes full use of the fast response of the fuzzy control. And when the error is smaller than the value, the system is about to be in the steady state, PID control is adopted to eliminate static error. The problems of PZT existing in the field of precise positioning are overcome. The results of the experiments prove that the project is correct and practicable.

Usefulness of chest radiographs in first asthma attacks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gershel, J.C.; Goldman, H.S.; Stein, R.E.K.

1983-08-11

To assess the value of routine chest radiography during acute first attacks of asthma, we studied 371 consecutive children over one year of age who presented with an initial episode of wheezing. Three hundred fifty children (94.3%) had radiographic findings that were compatible with uncomplicated asthma and were considered negative. Twenty-one (5.7%) had positive findings: atelectasis and pneumonia were noted in seven, segmental atelectasis in six, pneumonia in five, multiple areas of subsegmental atelectasis in two, and pneumomediastinum in one. The patients with positive films were more likely to have a respiratory rate above 60 or a pulse rate abovemore » 160 (P < 0.001), localized rales or localized decreased breath sounds before treatment (P < 0.01), and localized rales (P < 0.005) and localized wheezing (P < 0.02) after treatment; also, these patients were admitted to the hospital more often (P < 0.001). Ninety-five percent (20 of 21) of the children with positive films could be identified before treatment on the basis of a combination of tachypnea, tachycardia, fever, and localized rales or localized decreased breath sounds. Most first-time wheezers will not have positive radiographs; careful clinical evaluation should reveal which patients will have abnormal radiographs and will therefore benefit from the procedure. 20 references, 3 tables.« less

77 FR 35879 - Defense Federal Acquisition Regulation Supplement: Title 41 Positive Law Codification-Further...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-15

... Acquisition Regulation Supplement: Title 41 Positive Law Codification--Further Implementation (DFARS Case 2012...) to conform statutory titles throughout the DFARS to the new Positive Law Codification of Title 41... the ``Service Contract Labor Standards statute''). A table providing the historical titles of the Acts...

Osmotic potential and projected drought tolerance of four phreatophytic shrub species in Owens Valley, California

USGS Publications Warehouse

Dileanis, Peter D.; Groeneveld, David P.

1989-01-01

A substantial quantity of the water used by plant communities growing on the floor of Owens Valley, California, is derived from a shallow unconfined aquifer. Fluctuations in the water table caused by ground-water withdrawal may result in periods when this water supply is not accessible to plants. The capacity of the plants to adapt to these periods of water loss depends on the availability of water stored in the soil and on physiological characteristics related to the ability of the plants to resist dehydration and wilting. Osmotic adjustment occurred in four phreatophytic shrub species at sites near Bishop, California, where the water table had been lowered by a system of pump-equipped wells installed in the vicinity of vegetation transects. The pressure-volume technique was used to determine osmotic potential and cell-wall elasticity between March 1985 and September 1986 for Atriplex torreyi, Chrysothamnus nauseosus , Sarcobatus verm iculatus , and Artemisia tridentata. Although not usually classified as a phreatophyte, Artemisia tridentata, where it grows on the valley floor, is apparently dependent on the depth to the water table. During late summer, osmotic potentials were 0.37 to 0.41 MPa (megapascal) lower in plants growing on the site where the water table had been lowered compared to an adjacent site where the water table remained at its natural levels. Measurements of soil matric potential at the two sites indicated that osmotic adjustment occurred in response to stress caused by lowering the water table. A theoretical lower limit of osmotic adjustment was determined by comparing initial cell osmotic potentials with initial xylem water potentials. These experimentally derived limits indicated that Atriplex torreyi and S. vermiculatus may maintain leaf cell turgor at significantly lower cell water potentials (about -4.5 MPa) than C. nauseosus or Artemisia tridentata (about -2.5 MPa), which allows them to function in drier soil environments.

Osmotic potential and projected drought tolerance of four phreatophytic shrub species in Owens Valley, California

USGS Publications Warehouse

Dileanis, Peter D.; Groeneveld, D.P.

1988-01-01

A large part of the water used by plant communities growing on the floor of Owens Valley, California, is derived from a shallow unconfined aquifer. Fluctuations in the water table caused by groundwater withdrawal may result in periods when this water supply is not accessible to plants. The capacity of the plants to adapt to these periods of water loss depend on the availability of water stored in the soil and on physiological characteristics related to the ability of the plants to resist dehydration and wilting. Osmotic adjustment occurred in four phreatophytic shrub species at sites near bishop, California, where the water table had been lowered by a system of pump-equipped wells installed in the vicinity of vegetation transects. The pressure-volume techniques was used to determine osmotic potential and cell-wall elasticity between March 1985 and September 1986 for Atriplex torreyi, Chrysothamnus nauseosus , Sarcobatus vermiculatus, and Artemisia tridentata. Although not usually classified as a phreatophyte, Artemisia tridentata, where it grows on the valley floor, is apparently dependent on the depth to the water table. During late summer, osmotic potentials were 0.37 to 0.41 megapascal lower in plants growing on the site where the water table had been lowered compared to an adjacent site where the water table remained at its natural levels. Measurements of soil matric potential at the two sites indicated that osmotic adjustment occurred in response to stress caused by lowering the water table. A theoretical lower limit of osmotic adjustment was determined by comparing initial cell osmotic potentials with initial xylem water potentials. These experimentally derived limits indicated that A. torreyi and S. vermiculatus may maintain leaf cell turgor at significantly lower cell water potentials (about -4.5 megapascals) than C. nauseosus or A. tridentata (about -2.5 megapascals) and allows them to function in dryer soil environments. (Author 's abstract)

40 CFR 91.320 - Carbon dioxide analyzer calibration.

Code of Federal Regulations, 2011 CFR

2011-07-01

... (64 percent) is required (see following table). Example calibration points (percent) Acceptable for...) The initial and periodic interference, system check, and calibration test procedures specified in 40...

40 CFR 91.320 - Carbon dioxide analyzer calibration.

Code of Federal Regulations, 2013 CFR

2013-07-01

... (64 percent) is required (see following table). Example calibration points (percent) Acceptable for...) The initial and periodic interference, system check, and calibration test procedures specified in 40...

40 CFR 91.320 - Carbon dioxide analyzer calibration.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (64 percent) is required (see following table). Example calibration points (percent) Acceptable for...) The initial and periodic interference, system check, and calibration test procedures specified in 40...

Online Wavelet Complementary velocity Estimator.

PubMed

Righettini, Paolo; Strada, Roberto; KhademOlama, Ehsan; Valilou, Shirin

2018-02-01

In this paper, we have proposed a new online Wavelet Complementary velocity Estimator (WCE) over position and acceleration data gathered from an electro hydraulic servo shaking table. This is a batch estimator type that is based on the wavelet filter banks which extract the high and low resolution of data. The proposed complementary estimator combines these two resolutions of velocities which acquired from numerical differentiation and integration of the position and acceleration sensors by considering a fixed moving horizon window as input to wavelet filter. Because of using wavelet filters, it can be implemented in a parallel procedure. By this method the numerical velocity is estimated without having high noise of differentiators, integration drifting bias and with less delay which is suitable for active vibration control in high precision Mechatronics systems by Direct Velocity Feedback (DVF) methods. This method allows us to make velocity sensors with less mechanically moving parts which makes it suitable for fast miniature structures. We have compared this method with Kalman and Butterworth filters over stability, delay and benchmarked them by their long time velocity integration for getting back the initial position data. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Erratum to "Large-scale mitochondrial COI gene sequence variability reflects the complex colonization history of the invasive soft-shell clam, Mya arenaria (L.) (Bivalvia)" [Estuar. Coast. Shelf Sci. 181 (2016) 256-265

NASA Astrophysics Data System (ADS)

Lasota, Rafal; Pierscieniak, Karolina; Garcia, Pascale; Simon-Bouhet, Benoit; Wolowicz, Maciej

2017-03-01

The publisher regrets a printing error in the last paragraph in the Results section. The correct text should read as follows: Tajima's D, Fu and Li's D* and F*, and Fu's Fs were negative for all American populations, and statistically significant in most cases (Table 3). In most of the European populations the values of neutrality tests were positive, but not statistically significant. The highest positive values of neutrality tests were noted in the populations from Reykjavik (Iceland) and Dublin (Ireland) (Table 3).

Use of Exogenous Progestins and Risk or In Situ and Invasive Breast Cancer

DTIC Science & Technology

2011-10-01

will be funded by the parent R01 (NCI) grant, and not by the Era of Hope Scholar Award. Table 1: Participant enrollment report Project 2 Project 1...of lobular tumors that were node positive, PR+, e-cadherin negative , and had low p21 expression (Table 6). No differences were seen across the other...Node negative 61% 1.2 (0.8-2.0) 63% 1.9 (1.04-3.4) Node positive 31% 0.9 (0.5-1.7) 37% 3.7 (1.8-7.8) PR+ 89% 1.2 (0.8-1.9) 84% 2.9 (1.7-5.1) PR- 11

Detecting changes in surface moisture and water table position with spectral changes in surface vegetation in northern peatlands

NASA Astrophysics Data System (ADS)

Meingast, Karl M.

Due to warmer and drier conditions, wildland fire has been increasing in extent into peatland ecosystems during recent decades. As such, there is an increasing need for broadly applicable tools to detect surface peat moisture, in order to ascertain the susceptibility of peat burning, and the vulnerability of deep peat consumption in the event of a wildfire. In this thesis, a field portable spectroradiometer was used to measure surface reflectance of two Sphagnum moss dominated peatlands. Relationships were developed correlating spectral indices to surface moisture as well as water table position. Spectral convolutions were also applied to the high resolution spectra to represent spectral sensitivity of earth observing sensors. Band ratios previously used to monitor surface moisture with these sensors were assessed. Strong relationships to surface moisture and water table position are evident for both the narrowband indices as well as broadened indices. This study also found a dependence of certain spectral relationships on changes in vegetation cover by leveraging an experimental vegetation manipulation. Results indicate broadened indices employing the 1450-1650 nm region may be less stable under changing vegetation cover than those located in the 1200 nm region.

Rocking and rolling: A can that appears to rock might actually roll

NASA Astrophysics Data System (ADS)

Srinivasan, Manoj; Ruina, Andy

2008-12-01

A beer bottle or soda can on a table, when slightly tipped and released, falls to an upright position and then rocks up to a somewhat opposite tilt. Superficially this rocking motion involves a collision when the flat circular base of the container slaps the table before rocking up to the opposite tilt. A keen eye notices that the after-slap rising tilt is not generally just diametrically opposite the initial tilt but is veered to one side or the other. Cushman and Duistermaat [Regular Chaotic Dyn. 11, 31 (2006)] recently noticed such veering when a flat disk with rolling boundary conditions is dropped nearly flat. Here, we generalize these rolling disk results to arbitrary axi-symmetric bodies and to frictionless sliding. More specifically, we study motions that almost but do not quite involve a face-down collision of the round container’s bottom with the tabletop. These motions involve a sudden rapid motion of the contact point around the circular base. Surprisingly, similar to the rolling disk, the net angle of motion of this contact point is nearly independent of initial conditions. This angle of turn depends simply on the geometry and mass distribution but not on the moment of inertia about the symmetry axis. We derive simple asymptotic formulas for this “angle of turn” of the contact point and check the result with numerics and with simple experiments. For tall containers (height much bigger than radius) the angle of turn is just over π and the sudden rolling motion superficially appears as a nearly symmetric collision leading to leaning on an almost diametrically opposite point on the bottom rim.

Supportive and palliative care for metastatic breast cancer: resource allocations in low- and middle-income countries. A Breast Health Global Initiative 2013 consensus statement.

PubMed

Cleary, James; Ddungu, Henry; Distelhorst, Sandra R; Ripamonti, Carla; Rodin, Gary M; Bushnaq, Mohammad A; Clegg-Lamptey, Joe N; Connor, Stephen R; Diwani, Msemo B; Eniu, Alexandru; Harford, Joe B; Kumar, Suresh; Rajagopal, M R; Thompson, Beti; Gralow, Julie R; Anderson, Benjamin O

2013-10-01

Many women diagnosed with breast cancer in low- and middle-income countries (LMICs) present with advanced-stage disease. While cure is not a realistic outcome, site-specific interventions, supportive care, and palliative care can achieve meaningful outcomes and improve quality of life. As part of the 5th Breast Health Global Initiative (BHGI) Global Summit, an expert international panel identified thirteen key resource recommendations for supportive and palliative care for metastatic breast cancer. The recommendations are presented in three resource-stratified tables: health system resource allocations, resource allocations for organ-based metastatic breast cancer, and resource allocations for palliative care. These tables illustrate how health systems can provide supportive and palliative care services for patients at a basic level of available resources, and incrementally add services as more resources become available. The health systems table includes health professional education, patient and family education, palliative care models, and diagnostic testing. The metastatic disease management table provides recommendations for supportive care for bone, brain, liver, lung, and skin metastases as well as bowel obstruction. The third table includes the palliative care recommendations: pain management, and psychosocial and spiritual aspects of care. The panel considered pain management a priority at a basic level of resource allocation and emphasized the need for morphine to be easily available in LMICs. Regular pain assessments and the proper use of pharmacologic and non-pharmacologic interventions are recommended. Basic-level resources for psychosocial and spiritual aspects of care include health professional and patient and family education, as well as patient support, including community-based peer support. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

Seasonal ice and hydrologic controls on dissolved organic carbon and nitrogen concentrations in a boreal-rich fen

Treesearch

Evan S. Kane; Merritt R. Turetsky; Jennifer W. Harden; A. David McGuire; James M. Waddington

2010-01-01

Boreal wetland carbon cycling is vulnerable to climate change in part because hydrology and the extent of frozen ground have strong influences on plant and microbial functions. We examined the response of dissolved organic carbon (DOC) and total dissolved nitrogen (TDN) across an experimental manipulation of water table position (both raised and lowered water table...

A Network Centric Warfare (NCW) Compliance Process for Australian Defence

DTIC Science & Technology

2006-08-01

discovery and access by a wide range of authorised Defence users. The information could be used to simplify future NCW Compliance Assessments by re-using...Security standards 1. General Security Services - General Table 5.1 2. General Security services - Authentication Table 5.2 3. General Security...Personnel Positions in an authorised establishment must be filled by individuals who satisfy the necessary individual readiness requirements

Reliability Estimating Procedures for Electric and Thermochemical Propulsion Systems. Volume 2

DTIC Science & Technology

1977-02-01

final form. For some components, the parameters are calculated from design factors (e.g., design life) that must be input when requested. Each component...Components Components are regarded as statis- tically identical if they are drawn from the same production lot because the initial and sub- sequent...table yields b 0.0023 The - factors are obtained from Tables 2.2.4-1 through 2.2.4-5: Factor Value rE Space, flight 1 JANTXV quality 0.5 7A Small signal

Optimal Constellation Design for Maximum Continuous Coverage of Targets Against a Space Background

DTIC Science & Technology

2012-05-31

constellation is considered with the properties shown in Table 13. The parameter hres refers to the number of equally spaced offset planes in which cross...mean anomaly 180 ◦ M0i mean anomaly of lead satellite at epoch 0 ◦ R omni-directional sensor range 5000 km m initial polygon resolution 50 PPC hres ...a Walker Star. Idealized parameters for the Iridium constellation are shown in Table 14. The parameter hres refers to the number of equally spaced

A Near to Far Transformation using Spherical Expansions Phase 1: Verification on Simulated Antennas

DTIC Science & Technology

2014-09-01

Antenna Pattern Range. . . . . 75 List of Tables 1 Notation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 Legendre polynomials ...first kind Pmn (x) are [3, Equation 12.84 and footnote]: Pmn (x) := (−1)m(1− x2)m/2 dm dxm Pn(x), where Pn(x)’s are the Legendre polynomials . There is the...n ) (4) 9 that computes Pmn (x) = 0 for m > n (5) Table 2 lists the initial Legendre polynomials and their derivatives. Figure 8 plots the first few

Topics in Optical Materials and Device Research - II. Volume II.

DTIC Science & Technology

1982-01-01

FILE AND STORE IT IN CORE ACCA /IF NO FILE, ASSUME IT IS ALREADY IN CORE (NIC) JMS @ZERTAB /ZERO THE COMMAND TABLE TABLA /INITIALIZE THE CAMERA TABLE TO...BEFORE CALLING. WILL FIND THE FIRST AVAILABLE SPACE. *2420 OPENW, 0 JMS DIRFIN MONM @DISOLV JMS 0DIRFUN 1 2 NOFIL /POINTS TO A VALUE OF 0 ACCA JMS...ACCM FILNM MPOM CLOSE MEMA @CLOSE ACCM FILNM+I MPOM CLOSE JMS DIRFIN JMS @DIRFUN 1 1 FILNM ACCA JMS DIROUT JMP @CLOSE / // SUBROUTINE WRITE(IT,SIZE

Biological Utilization of Wood for Production of Chemicals and Foodstuffs.

DTIC Science & Technology

1981-03-01

ration and, corn . The results are presented in of lambs. As high as 20 percent of although the cost of gains on the table 50. The results of the...differs in that, after an initial 185 ° C. At this time, most of the low- Residues high in bark reduce the period of low-temperature hydrolysis...and hydrolyzate is removed at the per part of the chip bed. The high table 6. bottom with no interruptions until the through-put rate is continued until

Pretreatment tables predicting pathologic stage of locally advanced prostate cancer.

PubMed

Joniau, Steven; Spahn, Martin; Briganti, Alberto; Gandaglia, Giorgio; Tombal, Bertrand; Tosco, Lorenzo; Marchioro, Giansilvio; Hsu, Chao-Yu; Walz, Jochen; Kneitz, Burkhard; Bader, Pia; Frohneberg, Detlef; Tizzani, Alessandro; Graefen, Markus; van Cangh, Paul; Karnes, R Jeffrey; Montorsi, Francesco; van Poppel, Hein; Gontero, Paolo

2015-02-01

Pretreatment tables for the prediction of pathologic stage have been published and validated for localized prostate cancer (PCa). No such tables are available for locally advanced (cT3a) PCa. To construct tables predicting pathologic outcome after radical prostatectomy (RP) for patients with cT3a PCa with the aim to help guide treatment decisions in clinical practice. This was a multicenter retrospective cohort study including 759 consecutive patients with cT3a PCa treated with RP between 1987 and 2010. Retropubic RP and pelvic lymphadenectomy. Patients were divided into pretreatment prostate-specific antigen (PSA) and biopsy Gleason score (GS) subgroups. These parameters were used to construct tables predicting pathologic outcome and the presence of positive lymph nodes (LNs) after RP for cT3a PCa using ordinal logistic regression. In the model predicting pathologic outcome, the main effects of biopsy GS and pretreatment PSA were significant. A higher GS and/or higher PSA level was associated with a more unfavorable pathologic outcome. The validation procedure, using a repeated split-sample method, showed good predictive ability. Regression analysis also showed an increasing probability of positive LNs with increasing PSA levels and/or higher GS. Limitations of the study are the retrospective design and the long study period. These novel tables predict pathologic stage after RP for patients with cT3a PCa based on pretreatment PSA level and biopsy GS. They can be used to guide decision making in men with locally advanced PCa. Our study might provide physicians with a useful tool to predict pathologic stage in locally advanced prostate cancer that might help select patients who may need multimodal treatment. Copyright © 2014 European Association of Urology. Published by Elsevier B.V. All rights reserved.

Groundwater flow, heat transport, and water table position within volcanic edifices: Implications for volcanic processes in the Cascade Range

USGS Publications Warehouse

Hurwitz, S.; Kipp, K.L.; Ingebritsen, S.E.; Reid, M.E.

2003-01-01

The position of the water table within a volcanic edifice has significant implications for volcano hazards, geothermal energy, and epithermal mineralization. We have modified the HYDROTHERM numerical simulator to allow for a free-surface (water table) upper boundary condition and a wide range of recharge rates, heat input rates, and thermodynamic conditions representative of continental volcano-hydrothermal systems. An extensive set of simulations was performed on a hypothetical stratovolcano system with unconfined groundwater flow. Simulation results suggest that the permeability structure of the volcanic edifice and underlying material is the dominant control on water table elevation and the distribution of pressures, temperatures, and fluid phases at depth. When permeabilities are isotropic, water table elevation decreases with increasing heat flux and increases with increasing recharge, but when permeabilities are anisotropic, these effects can be much less pronounced. Several conditions facilitate the ascent of a hydrothermal plume into a volcanic edifice: a sufficient source of heat and magmatic volatiles at depth, strong buoyancy forces, and a relatively weak topography-driven flow system. Further, the plume must be connected to a deep heat source through a pathway with a time-averaged effective permeability ???1 ?? 10-16 m2, which may be maintained by frequent seismicity. Topography-driven flow may be retarded by low permeability in the edifice and/or the lack of precipitation recharge; in the latter case, the water table may be relatively deep. Simulation results were compared with observations from the Quaternary stratovolcanoes along the Cascade Range of the western United States to infer hydrothermal processes within the edifices. Extensive ice caps on many Cascade Range stratovolcanoes may restrict recharge on the summits and uppermost flanks. Both the simulation results and limited observational data allow for the possibility that the water table beneath the stratovolcanoes is relatively deep.

Water Table and Soil Gas Emission Responses to Disturbance in Northern Forested Wetlands

NASA Astrophysics Data System (ADS)

Pypker, T. G.; Van Grinsven, M. J.; Bolton, N. W.; Shannon, J.; Davis, J.; Wagenbrenner, J. W.; Sebestyen, S. D.; Kolka, R. K.

2014-12-01

Exotic pest infestations are increasingly common throughout North American forests. In forested wetlands, disturbance events may alter nutrient, carbon, and hydrologic pathways. Recently, ash (Fraxinus spp.) forests in North Central and Eastern North America have been exposed to the exotic emerald ash borer (EAB) (Burprestidae: Agrilus planipennis), and the rapid and extensive expansion of EAB populations since 2001 may soon eliminate most existing ash stands. Limited research has focused on post-establishment ecosystem impacts of an EAB disturbance, and to our knowledge, there are no studies that have evaluated the coupled response of black ash (Fraxinus nigra) wetland water tables, soil temperatures, and soil gas emissions to an EAB infestation. We present preliminary results that detail those responses to a simulated EAB disturbance. Water table position, soil temperature, and soil gas emissions (CO2 and CH4) were monitored in nine black ash wetlands in the Upper Peninsula of Michigan for three years, including one year of pre-treatment and two years of post-treatment data-collection. An EAB disturbance was simulated by girdling (Girdle) or felling (Clearcut) all black ash trees with diameters of 2.5 cm or greater within the wetland, and each treatment was applied to three sites. The results indicate that wetland water tables were insensitive to treatment effects, soil temperatures were significantly higher in the Clearcut treatment, soil gas flux was significantly higher in the Clearcut treatment, and the rate of soil gas flux was strongly regulated by water table position and temperature. No significant treatment effects were detected in the Girdle treatment during the first post-treatment year. Because water tables were insensitive to treatment, we concluded that water tables did not independently generate a soil gas flux response despite their strong regulatory influence. Furthermore, we concluded that the response of soil temperature to disturbance was largely the reason why elevated soil gas flux rates were observed in the Clearcut treatment.

40 CFR 90.320 - Carbon dioxide analyzer calibration.

Code of Federal Regulations, 2014 CFR

2014-07-01

... (see following table). Example calibration points (%) Acceptable for Calibration? 20, 30, 40, 50, 60... two percent of each test point to determine concentration. (b) The initial and periodic interference...

Attribution of Responsibility and Valence of Success and Failure in Relation to Initial Confidence and Task Performance

ERIC Educational Resources Information Center

Feather, N. T.

1969-01-01

Deals with the hypothesis that initial self-confidence and actual task performance determine whether the subject will attribute responsibility to himself or to luck. The data support the hypothesis and reveal distinct differences between males and female subjects in self-confidence and attribution of responsibility. Tables, graphs, and…

40 CFR Table 4 to Subpart Cccc of... - Summary of Reporting Requirements a

Code of Federal Regulations, 2012 CFR

2012-07-01

... requirements • Waste management plan • Anticipated date of initial startup § 60.2190 Startup notification Prior to initial startup • Type of waste to be burned• Maximum design waste burning capacity • Anticipated... occurred during a period of startup, shutdown, or malfunction § 60.2215 and 60.2220 Qualified operator...

40 CFR Table 4 to Subpart Cccc of... - Summary of Reporting Requirements a

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements • Waste management plan • Anticipated date of initial startup § 60.2190 Startup notification Prior to initial startup • Type of waste to be burned• Maximum design waste burning capacity • Anticipated... occurred during a period of startup, shutdown, or malfunction § 60.2215 and 60.2220 Qualified operator...

40 CFR Table 4 to Subpart Cccc of... - Summary of Reporting Requirements a

Code of Federal Regulations, 2011 CFR

2011-07-01

... requirements • Waste management plan • Anticipated date of initial startup § 60.2190 Startup notification Prior to initial startup • Type of waste to be burned• Maximum design waste burning capacity • Anticipated... occurred during a period of startup, shutdown, or malfunction § 60.2215 and 60.2220 Qualified operator...

40 CFR 63.9621 - What test methods and other procedures must I use to demonstrate initial compliance with the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... must I use to demonstrate initial compliance with the emission limits for particulate matter? 63.9621... the emission limits for particulate matter? (a) You must conduct each performance test that applies to... source, you must determine compliance with the applicable emission limit for particulate matter in Table...

40 CFR 63.9621 - What test methods and other procedures must I use to demonstrate initial compliance with the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... must I use to demonstrate initial compliance with the emission limits for particulate matter? 63.9621... the emission limits for particulate matter? (a) You must conduct each performance test that applies to... source, you must determine compliance with the applicable emission limit for particulate matter in Table...

How Should Remote Clinical Monitoring Be Used to Treat Alcohol Use Disorders?: Initial Findings From an Expert Round Table Discussion.

PubMed

Gordon, Alan; Jaffe, Adi; McLellan, A Thomas; Richardson, Gary; Skipper, Gregory; Sucher, Michel; Tirado, Carlos F; Urschel, Harold C

Scientific evidence combined with new health insurance coverage now enable a chronic illness management approach to the treatment of alcohol use disorders (AUDs), including regular monitoring of blood alcohol content (BAC), as a useful indicator of disease control. Recent technical advances now permit many different types of remote, real-time monitoring of BAC. However, there is no body of research to empirically guide clinicians in how to maximize the clinical potential of remote BAC monitoring.As an initial step in guiding and supporting such research, the manufacturer of one remote BAC monitoring system sponsored a group of experienced clinicians and clinical researchers to discuss 8 issues that generally affect remote, clinical BAC monitoring of "adults in outpatient AUD treatment."The expert panel unanimously agreed that remote BAC monitoring for at least 12 months during and after the outpatient treatment of AUD was a clinically viable deterrent to relapse. There was also consensus that positive test results (ie, recent alcohol use) should lead to intensified care and monitoring. However, there was no agreement on specific types of clinical intensification after a positive test. The panel agreed that sharing positive and negative test results with members of the patient support group was helpful in reinforcing abstinence, yet they noted many practical issues regarding information sharing that remain concerning. Significant differences within the panel on several important clinical issues underline the need for more clinical and implementation research to produce empirically-supported guidelines for the use of remote BAC monitoring in AUD treatment.

How Should Remote Clinical Monitoring Be Used to Treat Alcohol Use Disorders?: Initial Findings From an Expert Round Table Discussion

PubMed Central

Gordon, Alan; Jaffe, Adi; McLellan, A. Thomas; Richardson, Gary; Skipper, Gregory; Sucher, Michel; Tirado, Carlos F.; Urschel, Harold C.

2017-01-01

Scientific evidence combined with new health insurance coverage now enable a chronic illness management approach to the treatment of alcohol use disorders (AUDs), including regular monitoring of blood alcohol content (BAC), as a useful indicator of disease control. Recent technical advances now permit many different types of remote, real-time monitoring of BAC. However, there is no body of research to empirically guide clinicians in how to maximize the clinical potential of remote BAC monitoring. As an initial step in guiding and supporting such research, the manufacturer of one remote BAC monitoring system sponsored a group of experienced clinicians and clinical researchers to discuss 8 issues that generally affect remote, clinical BAC monitoring of “adults in outpatient AUD treatment.” The expert panel unanimously agreed that remote BAC monitoring for at least 12 months during and after the outpatient treatment of AUD was a clinically viable deterrent to relapse. There was also consensus that positive test results (ie, recent alcohol use) should lead to intensified care and monitoring. However, there was no agreement on specific types of clinical intensification after a positive test. The panel agreed that sharing positive and negative test results with members of the patient support group was helpful in reinforcing abstinence, yet they noted many practical issues regarding information sharing that remain concerning. Significant differences within the panel on several important clinical issues underline the need for more clinical and implementation research to produce empirically-supported guidelines for the use of remote BAC monitoring in AUD treatment. PMID:28157829

VizieR Online Data Catalog: V and R CCD photometry of visual binaries (Abad+, 2004)

NASA Astrophysics Data System (ADS)

Abad, C.; Docobo, J. A.; Lanchares, V.; Lahulla, J. F.; Abelleira, P.; Blanco, J.; Alvarez, C.

2003-11-01

Table 1 gives relevant data for the visual binaries observed. Observations were carried out over a short period of time, therefore we assign the mean epoch (1998.58) for the totality of data. Data of individual stars are presented as average data with errors, by parameter, when various observations have been calculated, as well as the number of observations involved. Errors corresponding to astrometric relative positions between components are always present. For single observations, parameter fitting errors, specially for dx and dy parameters, have been calculated analysing the chi2 test around the minimum. Following the rules for error propagation, theta and rho errors can be estimated. Then, Table 1 shows single observation errors with an additional significant digit. When a star does not have known references, we include it in Table 2, where J2000 position and magnitudes are from the USNO-A2.0 catalogue (Monet et al., 1998, Cat. ). (2 data files).