Turning a Private Label Bank Card into a Multi-function Campus ID Card.

ERIC Educational Resources Information Center

James, Thomas G.; Norwood, Bill R.

1991-01-01

This article describes the development at Florida State University of the Seminole ACCESS card, which functions simultaneously as a bank automated teller machine card, a student identification card, and a debit card. Explained are the partnership between the university and the bank charge card center, funding system, technologies involved, and…

The breeding bird survey, 1966

USGS Publications Warehouse

Robbins, Chandler S.; Van Velzen, Willet T.

1967-01-01

A Breeding Bird Survey of a large section on North America was conducted during June 1966. Cooperators ran a total of 585 Survey routes in 26 eastern States and 4 Canadian Provinces. Future coverage of established routes will enable changes in the abundance of North American breeding birds to be measured. Routes are selected at random on the basis of one-degree blocks of latitude and longitude. Each 241/2-mile route, with 3-minute stops spaced one-half mile apart, is driven by automobile. All birds heard or seen at the stops are recorded on special forms and the data are then transferred to machine punch cards. The average number of birds per route is tabulated by State, along with the total number of each species and the percent of routes and stops upon which they were recorded. Maps are presented showing the range and abundance of selected species. Also, a year-to-year comparison is made of populations of selected species on Maryland routes in 1965 and 1966.

Security Aspects of Smart Cards vs. Embedded Security in Machine-to-Machine (M2M) Advanced Mobile Network Applications

NASA Astrophysics Data System (ADS)

Meyerstein, Mike; Cha, Inhyok; Shah, Yogendra

The Third Generation Partnership Project (3GPP) standardisation group currently discusses advanced applications of mobile networks such as Machine-to-Machine (M2M) communication. Several security issues arise in these contexts which warrant a fresh look at mobile networks’ security foundations, resting on smart cards. This paper contributes a security/efficiency analysis to this discussion and highlights the role of trusted platform technology to approach these issues.

[Card-based age control mechanisms at tobacco vending machines. Effect and consequences].

PubMed

Schneider, S; Meyer, C; Löber, S; Röhrig, S; Solle, D

2010-02-01

Until recently, 700,000 tobacco vending machines provided uncontrolled access to cigarettes for children and adolescents in Germany. On January 1, 2007, a card-based electronic locking device was attached to all tobacco vending machines to prevent the purchase of cigarettes by children and adolescents under 16. Starting in 2009, only persons older than 18 are able to buy cigarettes from tobacco vending machines. The aim of the present investigation (SToP Study: "Sources of Tobacco for Pupils" Study) was to assess changes in the number of tobacco vending machines after the introduction of these new technical devices (supplier's reaction). In addition, the ways smoking adolescents make purchases were assessed (consumer's reaction). We registered and mapped the total number of tobacco points of sale (tobacco POS) before and after the introduction of the card-based electronic locking device in two selected districts of the city of Cologne. Furthermore, pupils from local schools (response rate: 83%) were asked about their tobacco consumption and ways of purchase using a questionnaire. Results indicated that in the area investigated the total number of tobacco POSs decreased from 315 in 2005 to 277 in 2007. The rates of decrease were 48% for outdoor vending machines and 8% for indoor vending machines. Adolescents reported circumventing the card-based electronic locking devices (e.g., by using cards from older friends) and using other tobacco POSs (especially newspaper kiosks) or relying on their social network (mainly friends). The decreasing number of tobacco vending machines has not had a significant impact on cigarette acquisition by adolescent smokers as they tend to circumvent the newly introduced security measures.

Age verification cards fail to fully prevent minors from accessing tobacco products.

PubMed

Kanda, Hideyuki; Osaki, Yoneatsu; Ohida, Takashi; Kaneita, Yoshitaka; Munezawa, Takeshi

2011-03-01

Proper age verification can prevent minors from accessing tobacco products. For this reason, electronic locking devices based on a proof-of age system utilising cards were installed in almost every tobacco vending machine across Japan and Germany to restrict sales to minors. We aimed to clarify the associations between amount smoked by high school students and the usage of age verification cards by conducting a nationwide cross-sectional survey of students in Japan. This survey was conducted in 2008. We asked high school students, aged 13-18 years, in Japan about their smoking behaviour, where they purchase cigarettes, if or if not they have used age verification cards, and if yes, how they obtained this card. As the amount smoked increased, the prevalence of purchasing cigarettes from vending machines also rose for both males and females. The percentage of those with experience of using an age verification card was also higher among those who smoked more. Somebody outside of family was the top source of obtaining cards. Surprisingly, around 5% of males and females belonging to the group with highest smoking levels applied for cards themselves. Age verification cards cannot fully prevent minors from accessing tobacco products. These findings suggest that a total ban of tobacco vending machines, not an age verification system, is needed to prevent sales to minors.

48 CFR 52.204-4 - Printed or Copied Double-Sided on Postconsumer Fiber Content Paper.

Code of Federal Regulations, 2013 CFR

2013-10-01

... boxes; old newspapers; old magazines; mixed waste paper; tabulating cards; and used cordage; or (2) All paper, paperboard, and fibrous materials that enter and are collected from municipal solid waste; but... practicable, when not using electronic commerce methods to submit information or data to the Government. (End...

48 CFR 52.204-4 - Printed or Copied Double-Sided on Postconsumer Fiber Content Paper.

Code of Federal Regulations, 2012 CFR

2012-10-01

... boxes; old newspapers; old magazines; mixed waste paper; tabulating cards; and used cordage; or (2) All paper, paperboard, and fibrous materials that enter and are collected from municipal solid waste; but... practicable, when not using electronic commerce methods to submit information or data to the Government. (End...

48 CFR 52.204-4 - Printed or Copied Double-Sided on Postconsumer Fiber Content Paper.

Code of Federal Regulations, 2014 CFR

2014-10-01

... boxes; old newspapers; old magazines; mixed waste paper; tabulating cards; and used cordage; or (2) All paper, paperboard, and fibrous materials that enter and are collected from municipal solid waste; but... practicable, when not using electronic commerce methods to submit information or data to the Government. (End...

Space shuttle: Aerodynamic characteristics of a composite booster/040A orbiter launch configuration with fin and booster body configuration effect contribution

NASA Technical Reports Server (NTRS)

Ainsworth, R. W.; Johnson, J. C.; Watts, L. L.

1972-01-01

An investigation was made of the fin configuration and booster body configuration effects on a composite booster/040A orbiter launch configuration. Aerodynamic performance and stability characteristics in pitch and yaw were obtained. Configurations tested included two stepped cylindrical bodies of different lengths with a conical nose, four fin shapes of various sizes and aspect ratios mounted in different positions around the base of the bodies, two base flare angles and three 040A orbiter configurations. The orbiter variations included a tailless configuration and two tail sizes. A tailless booster launch configuration with deflected petals (expanded flare sectors) was also tested. The model scale was 0.003366. Data were converted to coefficient form in near real time, punched on cards, and tabulated. The cards used in conjunction with a Benson-Lehner plotter were used to provide plotted data. At the end of the test, tabulated input forms were completed for the SADSAC computer program to aid in publishing the final test data report.

EduCard. Adult Education Access Card. Policy Option Paper on Strategic Recommendation 4. First Edition.

ERIC Educational Resources Information Center

Porter, Dennis

One recommendation of the 1989 California Strategic Plan for Adult Education is the use of EduCard. EduCard, the Adult Education Access Card, is a means of giving learners access to information about educational opportunities and providing administrators with machine-readable information on learners' prior education and traiing. Three models are:…

Documentation for the machine-readable version of the revised new general catalogue of nonstellar astronomical objects

NASA Technical Reports Server (NTRS)

Warren, W. H., Jr.

1982-01-01

The contents and format of the machine-readable version of the cataloque distributed by the Astronomical Data Center are described. Coding for the various scales and abbreviations used in the catalogue are tabulated and certain revisions to the machine version made to improve storage efficiency and notation are discussed.

Development and Use of Mark Sense Record Cards for Recording Medical Data on Pilots Subjected to Acceleration Stress

NASA Technical Reports Server (NTRS)

Smedal, Harald A.; Havill, C. Dewey

1962-01-01

A TIME-HONORED system of recording medical histories and the data obtained on physical and laboratory examination has been that of writing the information on record sheets that go into a folder for each patient. In order to have information which would be more readily retrieved, 'a program was initiated in 1952 by the U. S. Naval School of Aviation Medicine in connection with their "Care of the Flyer" study to place this information on machine record cards. In 1958, a machine record card method was developed for recording medical data in connection with the astronaut selection program. Machine record cards were also developed by the Aero Medical Laboratory, Wright-Patterson AFB, Ohio, and the Aviation Medical Acceleration Laboratory, Naval Air Development Center, Johnsville, Pennsylvania, for use in connection with a variety of tests including acceleration stress.1 Therefore, a variety of systems resulted in which data of a medical nature could easily be recalled. During the NASA, Ames Research Center centrifuge studies/'S the pilot subjects were interviewed after each centrifuge run, or series of runs, and subjective information was recorded in a log book by the usual history taking methods referred to above. After the methods Were reviewed, it' was recognized that a card system would be very useful in recording data from our pilots after they had been exposed to acceleration stress. Since the acceleration stress cards already developed did not meet our requirements, it was decided a different card was needed.

Cracking the code: a decode strategy for the international business machines punch cards of Korean war soldiers.

PubMed

Mitsunaga, Erin M

2006-05-01

During the Korean War, International Business Machines (IBM) punch cards were created for every individual involved in military combat. Each card contained all pertinent personal information about the individual and was utilized to keep track of all soldiers involved. However, at present, all of the information known about these punch cards reveals only their format and their significance; there is little to no information on how these cards were created or how to interpret the information contained without the aid of the computer system used during the war. Today, it is believed there is no one available to explain this computerized system, nor do the original computers exist. This decode strategy is the result of an attempt to decipher the information on these cards through the use of all available medical and dental records for each individual examined. By cross-referencing the relevant personal information with the known format of the cards, a basic guess-and-check method was utilized. After examining hundreds of IBM punch cards, however, it has become clear that the punch card method of recording information was not infallible. In some cases, there are gaps of information on cards where there are data recorded on personal records; in others, information is punched incorrectly onto the cards, perhaps as the result of a transcription error. Taken all together, it is clear that the information contained on each individual's card should be taken solely as another form of personal documentation.

Increasing patient knowledge on the proper usage of a PCA machine with the use of a post-operative instructional card.

PubMed

Shovel, Louisa; Max, Bryan; Correll, Darin J

2016-01-01

The purpose of this study was to see if an instructional card, attached to the PCA machine following total hip arthroplasty describing proper use of the device, would positively affect subjects' understanding of device usage, pain scores, pain medication consumption and satisfaction. Eighty adults undergoing total hip replacements who had been prescribed PCA were randomized into two study groups. Forty participants received the standard post-operative instruction on PCA device usage at our institution. The other 40 participants received the standard of care in addition to being given a typed instructional card immediately post-operatively, describing proper PCA device use. This card was attached to the PCA device during their recovery period. On post-operative day one, each patient completed a questionnaire on PCA usage, pain scores and satisfaction scores. The pain scores in the Instructional Card group were significantly lower than the Control group (p = 0.024). Subjects' understanding of PCA usage was also improved in the Instructional Card group for six of the seven questions asked. The findings from this study strongly support that postoperative patient information on proper PCA use by means of an instructional card improves pain control and hence the overall recovery for patients undergoing surgery. In addition, through improved understanding it adds an important safety feature in that patients and potentially their family members and/or friends may refrain from PCA-by-proxy. This article demonstrates that the simple intervention of adding an instructional card to a PCA machine is an effective method to improve patients' knowledge as well as pain control and potentially increase the safety of the device use.

The Revenue vs. Service Balance

ERIC Educational Resources Information Center

Savarese, John

2006-01-01

Ten years ago, students at the University of Vermont (UVM) had to carry separate ID cards, meal cards, and athletic cards. Today, the single CATcard combines all of these functions, plus library privileges, an optional declining balance program called CAT$cratch, access to computer labs, use of vending machines without quarters, and even a ride on…

Birthdays and the Binary System: A Magical Mixture.

ERIC Educational Resources Information Center

Karp, Karen S.; Ronau, Robert N.

1997-01-01

Presents an activity involving the use of students' birth dates. Activity includes a classic binary representation of numerical values. In the Green Machine, Sorting Cards, and Window Cards, students observe, describe, and analyze patterns. (PVD)

12 CFR 712.5 - What activities and services are preapproved for CUSOs?

Code of Federal Regulations, 2012 CFR

2012-01-01

... services: (1) Automated teller machine (ATM) services; (2) Credit card and debit card services; (3) Data... brokerage or agency: (1) Agency for sale of insurance; (2) Provision of vehicle warranty programs; (3...

12 CFR 712.5 - What activities and services are preapproved for CUSOs?

Code of Federal Regulations, 2014 CFR

2014-01-01

... services: (1) Automated teller machine (ATM) services; (2) Credit card and debit card services; (3) Data... brokerage or agency: (1) Agency for sale of insurance; (2) Provision of vehicle warranty programs; (3...

12 CFR 712.5 - What activities and services are preapproved for CUSOs?

Code of Federal Regulations, 2011 CFR

2011-01-01

... services: (1) Automated teller machine (ATM) services; (2) Credit card and debit card services; (3) Data... brokerage or agency: (1) Agency for sale of insurance; (2) Provision of vehicle warranty programs; (3...

12 CFR 712.5 - What activities and services are preapproved for CUSOs?

Code of Federal Regulations, 2013 CFR

2013-01-01

... services: (1) Automated teller machine (ATM) services; (2) Credit card and debit card services; (3) Data... brokerage or agency: (1) Agency for sale of insurance; (2) Provision of vehicle warranty programs; (3...

12 CFR 205.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... device means a card, code, or other means of access to a consumer's account, or any combination thereof..., automated teller machines, and cash dispensing machines. (i) Financial institution means a bank, savings...

12 CFR 205.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... device means a card, code, or other means of access to a consumer's account, or any combination thereof..., automated teller machines, and cash dispensing machines. (i) Financial institution means a bank, savings...

12 CFR 205.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... device means a card, code, or other means of access to a consumer's account, or any combination thereof..., automated teller machines, and cash dispensing machines. (i) Financial institution means a bank, savings...

12 CFR 205.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... device means a card, code, or other means of access to a consumer's account, or any combination thereof..., automated teller machines, and cash dispensing machines. (i) Financial institution means a bank, savings...

Material fatigue data obtained by card-programmed hydraulic loading system

NASA Technical Reports Server (NTRS)

Davis, W. T.

1967-01-01

Fatigue tests using load distributions from actual loading histories encountered in flight are programmed on punched electronic accounting machine cards. With this hydraulic loading system, airframe designers can apply up to 55 load levels to a test specimen.

Machine learning techniques to predict sensitive patterns to fault attack in the Java Card application

NASA Astrophysics Data System (ADS)

Chahrazed, Yahiaoui; Jean-Louis, Lanet; Mohamed, Mezghiche; Karim, Tamine

2018-01-01

Fault attack represents one of the serious threats against Java Card security. It consists of physical perturbation of chip components to introduce faults in the code execution. A fault may be induced using a laser beam to impact opcodes and operands of instructions. This could lead to a mutation of the application code in such a way that it becomes hostile. Any successful attack may reveal a secret information stored in the card or grant an undesired authorisation. We propose a methodology to recognise, during the development step, the sensitive patterns to the fault attack in the Java Card applications. It is based on the concepts from text categorisation and machine learning. In fact, in this method, we represented the patterns using opcodes n-grams as features, and we evaluated different machine learning classifiers. The results show that the classifiers performed poorly when classifying dangerous sensitive patterns, due to the imbalance of our data-set. The number of dangerous sensitive patterns is much lower than the number of not dangerous patterns. We used resampling techniques to balance the class distribution in our data-set. The experimental results indicated that the resampling techniques improved the accuracy of the classifiers. In addition, our proposed method reduces the execution time of sensitive patterns classification in comparison to the SmartCM tool. This tool is used in our study to evaluate the effect of faults on Java Card applications.

Study on Parallel 2-DOF Rotation Machanism in Radar

NASA Astrophysics Data System (ADS)

Jiang, Ming; Hu, Xuelong; Liu, Lei; Yu, Yunfei

The spherical parallel machine has become the world's academic and industrial focus of the field in recent years due to its simple and economical manufacture as well as its structural compactness especially suitable for areas where space gesture changes. This paper dwells upon its present research and development home and abroad. The newer machine (RGRR-II) can rotate around the axis z within 360° and the axis y1 from -90° to +90°. It has the advantages such as less moving parts (only 3 parts), larger ratio of work space to machine size, zero mechanic coupling, no singularity. Constructing rotation machine with spherical parallel 2-DOF rotation join (RGRR-II) may realize semispherical movement with zero dead point and extent the range. Control card (PA8000NT Series CNC) is installed in the computer. The card can run the corresponding software which realizes radar movement control. The machine meets the need of radars in plane and satellite which require larger detection range, lighter weight and compacter structure.

AES Cardless Automatic Teller Machine (ATM) Biometric Security System Design Using FPGA Implementation

NASA Astrophysics Data System (ADS)

Ahmad, Nabihah; Rifen, A. Aminurdin M.; Helmy Abd Wahab, Mohd

2016-11-01

Automated Teller Machine (ATM) is an electronic banking outlet that allows bank customers to complete a banking transactions without the aid of any bank official or teller. Several problems are associated with the use of ATM card such card cloning, card damaging, card expiring, cast skimming, cost of issuance and maintenance and accessing customer account by third parties. The aim of this project is to give a freedom to the user by changing the card to biometric security system to access the bank account using Advanced Encryption Standard (AES) algorithm. The project is implemented using Field Programmable Gate Array (FPGA) DE2-115 board with Cyclone IV device, fingerprint scanner, and Multi-Touch Liquid Crystal Display (LCD) Second Edition (MTL2) using Very High Speed Integrated Circuit Hardware (VHSIC) Description Language (VHDL). This project used 128-bits AES for recommend the device with the throughput around 19.016Gbps and utilized around 520 slices. This design offers a secure banking transaction with a low rea and high performance and very suited for restricted space environments for small amounts of RAM or ROM where either encryption or decryption is performed.

Post-Attack Economic Stabilization Issues for Federal, State, and Local Governments

DTIC Science & Technology

1985-02-01

workers being transfered from large urban areas to production facilities in areas of lower risk . In another case, rent control staff should be quickly...food supermarkets , which do not universally accept bank cards. 3 0 A requirement will still exist for a large number of credit cards. While there is some...separate system is required for rationing. For example, the increasingly popular automatic teller machine ( ATM ) debit card routinely accesses both a

Review of EuCARD project on accelerator infrastructure in Europe

NASA Astrophysics Data System (ADS)

Romaniuk, Ryszard S.

2013-01-01

The aim of big infrastructural and research programs (like pan-European Framework Programs) and individual projects realized inside these programs in Europe is to structure the European Research Area - ERA in this way as to be competitive with the leaders of the world. One of this projects in EuCARD (European Coordination of Accelerator Research and Development) with the aim to structure and modernize accelerator, (including accelerators for big free electron laser machines) research infrastructure. This article presents the periodic development of EuCARD which took place between the annual meeting, April 2012 in Warsaw and SC meeting in Uppsala, December 2012. The background of all these efforts are achievements of the LHC machine and associated detectors in the race for new physics. The LHC machine works in the regime of p-p, Pb-p, Pb-Pb (protons and lead ions). Recently, a discovery by the LHC of Higgs like boson, has started vivid debates on the further potential of this machine and the future. The periodic EuCARD conference, workshop and meetings concern building of the research infrastructure, including in this advanced photonic and electronic systems for servicing large high energy physics experiments. There are debated a few basic groups of such systems like: measurement - control networks of large geometrical extent, multichannel systems for large amounts of metrological data acquisition, precision photonic networks of reference time, frequency and phase distribution. The aim of the discussion is not only summarize the current status but make plans and prepare practically to building new infrastructures. Accelerator science and technology is one of a key enablers of the developments in the particle physic, photon physics and also applications in medicine and industry. Accelerator technology is intensely developed in all developed nations and regions of the world. The EuCARD project contains a lot of subjects related directly and indirectly to photon physics and photonics, as well as optoelectronics, electronics and integration of these with large research infrastructure.

Design of Formats and Packs of Catalog Cards.

ERIC Educational Resources Information Center

OCLC Online Computer Library Center, Inc., Dublin, OH.

The three major functions of the Ohio College Library Center's Shared Cataloging System are: 1) provision of union catalog location listing; 2) making available cataloging done by one library to all other users of the system; and 3) production of catalog cards. The system, based on a central machine readable data base, speeds cataloging and…

The Semantic Web: From Representation to Realization

NASA Astrophysics Data System (ADS)

Thórisson, Kristinn R.; Spivack, Nova; Wissner, James M.

A semantically-linked web of electronic information - the Semantic Web - promises numerous benefits including increased precision in automated information sorting, searching, organizing and summarizing. Realizing this requires significantly more reliable meta-information than is readily available today. It also requires a better way to represent information that supports unified management of diverse data and diverse Manipulation methods: from basic keywords to various types of artificial intelligence, to the highest level of intelligent manipulation - the human mind. How this is best done is far from obvious. Relying solely on hand-crafted annotation and ontologies, or solely on artificial intelligence techniques, seems less likely for success than a combination of the two. In this paper describe an integrated, complete solution to these challenges that has already been implemented and tested with hundreds of thousands of users. It is based on an ontological representational level we call SemCards that combines ontological rigour with flexible user interface constructs. SemCards are machine- and human-readable digital entities that allow non-experts to create and use semantic content, while empowering machines to better assist and participate in the process. SemCards enable users to easily create semantically-grounded data that in turn acts as examples for automation processes, creating a positive iterative feedback loop of metadata creation and refinement between user and machine. They provide a holistic solution to the Semantic Web, supporting powerful management of the full lifecycle of data, including its creation, retrieval, classification, sorting and sharing. We have implemented the SemCard technology on the semantic Web site Twine.com, showing that the technology is indeed versatile and scalable. Here we present the key ideas behind SemCards and describe the initial implementation of the technology.

A STORAGE AND RETRIEVAL SYSTEM FOR DOCUMENTS IN INSTRUCTIONAL RESOURCES. REPORT NO. 13.

ERIC Educational Resources Information Center

DIAMOND, ROBERT M.; LEE, BERTA GRATTAN

IN ORDER TO IMPROVE INSTRUCTION WITHIN TWO-YEAR LOWER DIVISION COURSES, A COMPREHENSIVE RESOURCE LIBRARY WAS DEVELOPED AND A SIMPLIFIED CATALOGING AND INFORMATION RETRIEVAL SYSTEM WAS APPLIED TO IT. THE ROYAL MCBEE "KEYDEX" SYSTEM, CONTAINING THREE MAJOR COMPONENTS--A PUNCH MACHINE, FILE CARDS, AND A LIGHT BOX--WAS USED. CARDS WERE HEADED WITH KEY…

Zonal and tesseral harmonic coefficients for the geopotential function, from zero to 18th order

NASA Technical Reports Server (NTRS)

Kirkpatrick, J. C.

1976-01-01

Zonal and tesseral harmonic coefficients for the geopotential function are usually tabulated in normalized form to provide immediate information as to the relative significance of the coefficients in the gravity model. The normalized form of the geopotential coefficients cannot be used for computational purposes unless the gravity model has been modified to receive them. This modification is usually not done because the absolute or unnormalized form of the coefficients can be obtained from the simple mathematical relationship that relates the two forms. This computation can be quite tedious for hand calculation, especially for the higher order terms, and can be costly in terms of storage and execution time for machine computation. In this report, zonal and tesseral harmonic coefficients for the geopotential function are tabulated in absolute or unnormalized form. The report is designed to be used as a ready reference for both hand and machine calculation to save the user time and effort.

Lead isotope data bank; 2,624 samples and analyses cited

USGS Publications Warehouse

Doe, Bruce R.

1976-01-01

The Lead Isotope Data Bank (LIDB) was initiated to facilitate plotting data. Therefore, the Bank reflects data most often used in plotting rather than comprises a comprehensive tabulation of lead isotope data. Up until now, plotting was done using card decks processed by computer with tapes plotted by a Gerber plotter and more recently a CRT using a batch mode. Lack of a uniform format for sample identification was not a great impediment. With increase in the size of the bank, hand sorting is becoming prohibitive and ·plans are underway to put the bank into a uniform format on DISK with a card backup so that it may be accessed by use of IRIS on the DECK 10 computer at the U.S.G.S. facility in Denver. Plots will be constructed on a CRT. Entry of the bank into the IRIS accessing program is scheduled for completion in FY 1976

26 CFR 1.6050I-1 - Returns relating to cash in excess of $10,000 received in a trade or business.

Code of Federal Regulations, 2013 CFR

2013-04-01

... business use), but a $20,000 dump truck or a $20,000 factory machine is not. (3) Collectible. The term... of such person's passport, alien identification card, or other official document evidencing... driver's license or a credit card). In addition, a return will be considered incomplete if the person...

31 CFR 1010.330 - Reports relating to currency in excess of $10,000 received in a trade or business.

Code of Federal Regulations, 2013 CFR

2013-07-01

... business use), but a $20,000 dump truck or a $20,000 factory machine is not. (8) Collectible. The term... identification card, or other official document evidencing nationality or residence. Verification of the identity... identification when cashing or accepting checks (for example, a driver's license or a credit card). In addition...

26 CFR 1.6050I-1 - Returns relating to cash in excess of $10,000 received in a trade or business.

Code of Federal Regulations, 2012 CFR

2012-04-01

... business use), but a $20,000 dump truck or a $20,000 factory machine is not. (3) Collectible. The term... of such person's passport, alien identification card, or other official document evidencing... driver's license or a credit card). In addition, a return will be considered incomplete if the person...

26 CFR 1.6050I-1 - Returns relating to cash in excess of $10,000 received in a trade or business.

Code of Federal Regulations, 2014 CFR

2014-04-01

... business use), but a $20,000 dump truck or a $20,000 factory machine is not. (3) Collectible. The term... of such person's passport, alien identification card, or other official document evidencing... driver's license or a credit card). In addition, a return will be considered incomplete if the person...

26 CFR 1.6050I-1 - Returns relating to cash in excess of $10,000 received in a trade or business.

Code of Federal Regulations, 2011 CFR

2011-04-01

... business use), but a $20,000 dump truck or a $20,000 factory machine is not. (3) Collectible. The term... of such person's passport, alien identification card, or other official document evidencing... driver's license or a credit card). In addition, a return will be considered incomplete if the person...

26 CFR 1.6050I-1 - Returns relating to cash in excess of $10,000 received in a trade or business.

Code of Federal Regulations, 2010 CFR

2010-04-01

... business use), but a $20,000 dump truck or a $20,000 factory machine is not. (3) Collectible. The term... of such person's passport, alien identification card, or other official document evidencing... driver's license or a credit card). In addition, a return will be considered incomplete if the person...

31 CFR 1010.330 - Reports relating to currency in excess of $10,000 received in a trade or business.

Code of Federal Regulations, 2014 CFR

2014-07-01

... business use), but a $20,000 dump truck or a $20,000 factory machine is not. (8) Collectible. The term... identification card, or other official document evidencing nationality or residence. Verification of the identity... identification when cashing or accepting checks (for example, a driver's license or a credit card). In addition...

31 CFR 103.30 - Reports relating to currency in excess of $10,000 received in a trade or business.

Code of Federal Regulations, 2010 CFR

2010-07-01

... business use), but a $20,000 dump truck or a $20,000 factory machine is not. (8) Collectible. The term...'s passport, alien identification card, or other official document evidencing nationality or... license or a credit card). In addition, a report will be considered incomplete if the person required to...

12 CFR Appendix A to Part 1005 - Model Disclosure Clauses and Forms

Code of Federal Regulations, 2013 CFR

2013-01-01

... you learn of the loss or theft of your [card] [code], you can lose no more than $50 if someone used... learn of the loss or theft of your [card] [code], and we can prove we could have stopped someone from... each transfer you make using our [automated teller machines] [telephone bill-payment service] [point-of...

12 CFR Appendix A to Part 1005 - Model Disclosure Clauses and Forms

Code of Federal Regulations, 2012 CFR

2012-01-01

... you learn of the loss or theft of your [card] [code], you can lose no more than $50 if someone used... learn of the loss or theft of your [card] [code], and we can prove we could have stopped someone from... each transfer you make using our [automated teller machines] [telephone bill-payment service] [point-of...

Enhanced way of securing automated teller machine to track the misusers using secure monitor tracking analysis

NASA Astrophysics Data System (ADS)

Sadhasivam, Jayakumar; Alamelu, M.; Radhika, R.; Ramya, S.; Dharani, K.; Jayavel, Senthil

2017-11-01

Now a days the people's attraction towards Automated Teller Machine(ATM) has been increasing even in rural areas. As of now the security provided by all the bank is ATM pin number. Hackers know the way to easily identify the pin number and withdraw money if they haven stolen the ATM card. Also, the Automated Teller Machine is broken and the money is stolen. To overcome these disadvantages, we propose an approach “Automated Secure Tracking System” to secure and tracking the changes in ATM. In this approach, while creating the bank account, the bank should scan the iris known (a part or movement of our eye) and fingerprint of the customer. The scanning can be done with the position of the eye movements and fingerprints identified with the shortest measurements. When the card is swiped then ATM should request the pin, scan the iris and recognize the fingerprint and then allow the customer to withdraw money. If somebody tries to break the ATM an alert message is given to the nearby police station and the ATM shutter is automatically closed. This helps in avoiding the hackers who withdraw money by stealing the ATM card and also helps the government in identifying the criminals easily.

36 CFR 1254.82 - What limitations apply to my use of self-service card-operated copiers?

Code of Federal Regulations, 2012 CFR

2012-07-01

... limitations apply to my use of self-service card-operated copiers? (a) There is a 5-minute time limit on..., we may limit you to three copies when others are waiting to use the machine. If you wish to copy... for an extended time period. (b) If we must cancel an appointment due to copier failure, we make every...

36 CFR 1254.82 - What limitations apply to my use of self-service card-operated copiers?

Code of Federal Regulations, 2014 CFR

2014-07-01

... limitations apply to my use of self-service card-operated copiers? (a) There is a 5-minute time limit on..., we may limit you to three copies when others are waiting to use the machine. If you wish to copy... for an extended time period. (b) If we must cancel an appointment due to copier failure, we make every...

The identification of credit card encoders by hierarchical cluster analysis of the jitters of magnetic stripes.

PubMed

Leung, S C; Fung, W K; Wong, K H

1999-01-01

The relative bit density variation graphs of 207 specimen credit cards processed by 12 encoding machines were examined first visually, and then classified by means of hierarchical cluster analysis. Twenty-nine credit cards being treated as 'questioned' samples were tested by way of cluster analysis against 'controls' derived from known encoders. It was found that hierarchical cluster analysis provided a high accuracy of identification with all 29 'questioned' samples classified correctly. On the other hand, although visual comparison of jitter graphs was less discriminating, it was nevertheless capable of giving a reasonably accurate result.

A Qualitative Security Analysis of a New Class of 3-D Integrated Crypto Co-processors

DTIC Science & Technology

2012-01-01

and mobile phones, lottery ticket vending machines , and various electronic payment systems. The main reason for their use in such applications is that...military applications such as secure communication links. However, the proliferation of Automated Teller Machines (ATMs) in the ’80s introduced them to...commercial applications. Today many popular consumer devices have cryptographic processors in them, for example, smart- cards for pay-TV access machines

36 CFR § 1254.82 - What limitations apply to my use of self-service card-operated copiers?

Code of Federal Regulations, 2013 CFR

2013-07-01

... limitations apply to my use of self-service card-operated copiers? (a) There is a 5-minute time limit on..., we may limit you to three copies when others are waiting to use the machine. If you wish to copy... for an extended time period. (b) If we must cancel an appointment due to copier failure, we make every...

Turning Archival Tapes into an Online “Cardless” Catalog

PubMed Central

Zuckerman, Alan E.; Ewens, Wilma A.; Cannard, Bonnie G.; Broering, Naomi C.

1982-01-01

Georgetown University has created an online card catalog based on machine readable cataloging records (MARC) loaded from archival tapes or online via the OCLC network. The system is programmed in MUMPS and uses the medical subject headings (MeSH) authority file created by the National Library of Medicine. The online catalog may be searched directly by library users and has eliminated the need for manual filing of catalog cards.

Assessing soil impacts related to forest harvest operations

Treesearch

E.A. Carter; John M. III. Grace

2011-01-01

Three studies conducted in Alabama evaluated impacts associated with a clear cut harvest in three physiographic regions. Machine impacts were assessed via tabulation of soil disturbance classes, measurement of bulk density and soil strength, or a combination of the two. Soil disturbance classes were similar among all locations with untrafficked areas comprising...

Design of a real-time tax-data monitoring intelligent card system

NASA Astrophysics Data System (ADS)

Gu, Yajun; Bi, Guotang; Chen, Liwei; Wang, Zhiyuan

2009-07-01

To solve the current problem of low efficiency of domestic Oil Station's information management, Oil Station's realtime tax data monitoring system has been developed to automatically access tax data of Oil pumping machines, realizing Oil-pumping machines' real-time automatic data collection, displaying and saving. The monitoring system uses the noncontact intelligent card or network to directly collect data which can not be artificially modified and so seals the loopholes and improves the tax collection's automatic level. It can perform real-time collection and management of the Oil Station information, and find the problem promptly, achieves the automatic management for the entire process covering Oil sales accounting and reporting. It can also perform remote query to the Oil Station's operation data. This system has broad application future and economic value.

Investigating the Human Computer Interaction Problems with Automated Teller Machine Navigation Menus

ERIC Educational Resources Information Center

Curran, Kevin; King, David

2008-01-01

Purpose: The automated teller machine (ATM) has become an integral part of our society. However, using the ATM can often be a frustrating experience as people frequently reinsert cards to conduct multiple transactions. This has led to the research question of whether ATM menus are designed in an optimal manner. This paper aims to address the…

Examining perceptions of the usefulness and usability of a mobile-based system for pharmacogenomics clinical decision support: a mixed methods study

PubMed Central

Blagec, Kathrin; Romagnoli, Katrina M.; Boyce, Richard D.

2016-01-01

Background. Pharmacogenomic testing has the potential to improve the safety and efficacy of pharmacotherapy, but clinical application of pharmacogenetic knowledge has remained uncommon. Clinical Decision Support (CDS) systems could help overcome some of the barriers to clinical implementation. The aim of this study was to evaluate the perception and usability of a web- and mobile-enabled CDS system for pharmacogenetics-guided drug therapy–the Medication Safety Code (MSC) system–among potential users (i.e., physicians and pharmacists). Furthermore, this study sought to collect data on the practicability and comprehensibility of potential layouts of a proposed personalized pocket card that is intended to not only contain the machine-readable data for use with the MSC system but also human-readable data on the patient’s pharmacogenomic profile. Methods. We deployed an emergent mixed methods design encompassing (1) qualitative interviews with pharmacists and pharmacy students, (2) a survey among pharmacogenomics experts that included both qualitative and quantitative elements and (3) a quantitative survey among physicians and pharmacists. The interviews followed a semi-structured guide including a hypothetical patient scenario that had to be solved by using the MSC system. The survey among pharmacogenomics experts focused on what information should be printed on the card and how this information should be arranged. Furthermore, the MSC system was evaluated based on two hypothetical patient scenarios and four follow-up questions on the perceived usability. The second survey assessed physicians’ and pharmacists’ attitude towards the MSC system. Results. In total, 101 physicians, pharmacists and PGx experts coming from various relevant fields evaluated the MSC system. Overall, the reaction to the MSC system was positive across all investigated parameters and among all user groups. The majority of participants were able to solve the patient scenarios based on the recommendations displayed on the MSC interface. A frequent request among participants was to provide specific listings of alternative drugs and concrete dosage instructions. Negligence of other patient-specific factors for choosing the right treatment such as renal function and co-medication was a common concern related to the MSC system, while data privacy and cost-benefit considerations emerged as the participants’ major concerns regarding pharmacogenetic testing in general. The results of the card layout evaluation indicate that a gene-centered and tabulated presentation of the patient’s pharmacogenomic profile is helpful and well-accepted. Conclusions. We found that the MSC system was well-received among the physicians and pharmacists included in this study. A personalized pocket card that lists a patient’s metabolizer status along with critically affected drugs can alert physicians and pharmacists to the availability of essential therapy modifications. PMID:26925317

Laser cutting plastic materials

NASA Astrophysics Data System (ADS)

Vancleave, R. A.

1980-08-01

A 1000 watt CO2 laser was demonstrated as a reliable production machine tool for cutting of plastics, high strength reinforced composites, and other nonmetals. More than 40 different plastics were laser cut, and the results are tabulated. Applications for laser cutting described include fiberglass reinforced laminates, Kevlar/epoxy composites, fiberglass reinforced phenolics, nylon/epoxy laminates, ceramics, and disposal tooling made from acrylic.

Geographic Data Display Implementation

DTIC Science & Technology

1977-06-01

display to be either multiplied or divided by the magnification factor (normally 1.5). The result is a change of extent around the cursor as seen in... Products printer and a 200-card- per-minute card reader with the Interdata 4 (1-4). The 1-4 with its 64K of core is the applications machine connected...storing these values in the CURSTA array. 57 ZOOM IN FUNCTION KEY ZOOM OUT FUNCTION KEY ZMINTP ZMOUTP SET ZOOM OUT MAG FACTOR ZOMTOP SET

DOD Business Systems Modernization: Planned Investment in Navy Program to Create Cashless Shipboard Environment Needs to Be Justified and Better Managed

DTIC Science & Technology

2008-09-01

Abbreviations ATM automated teller machine BEA business enterprise architecture DOD...Limitations Automated Teller Machines (ATMs)-At-Sea 1988 Localized, shipboard ATMs that received and accounted for a portion of sailors’ and...use smart card technology for electronic retail ransactions and (2) economically justified on the basis of reliable analyses of stimated costs and

The research on visual industrial robot which adopts fuzzy PID control algorithm

NASA Astrophysics Data System (ADS)

Feng, Yifei; Lu, Guoping; Yue, Lulin; Jiang, Weifeng; Zhang, Ye

2017-03-01

The control system of six degrees of freedom visual industrial robot based on the control mode of multi-axis motion control cards and PC was researched. For the variable, non-linear characteristics of industrial robot`s servo system, adaptive fuzzy PID controller was adopted. It achieved better control effort. In the vision system, a CCD camera was used to acquire signals and send them to video processing card. After processing, PC controls the six joints` motion by motion control cards. By experiment, manipulator can operate with machine tool and vision system to realize the function of grasp, process and verify. It has influence on the manufacturing of the industrial robot.

A Two-Layer Least Squares Support Vector Machine Approach to Credit Risk Assessment

NASA Astrophysics Data System (ADS)

Liu, Jingli; Li, Jianping; Xu, Weixuan; Shi, Yong

Least squares support vector machine (LS-SVM) is a revised version of support vector machine (SVM) and has been proved to be a useful tool for pattern recognition. LS-SVM had excellent generalization performance and low computational cost. In this paper, we propose a new method called two-layer least squares support vector machine which combines kernel principle component analysis (KPCA) and linear programming form of least square support vector machine. With this method sparseness and robustness is obtained while solving large dimensional and large scale database. A U.S. commercial credit card database is used to test the efficiency of our method and the result proved to be a satisfactory one.

The Effect of Near-Miss Rate and Card Control when American Indians and Non-Indians Gamble in a Laboratory Situation: The Influence of Alcohol

ERIC Educational Resources Information Center

Whitton, Melissa; Weatherly, Jeffrey N.

2009-01-01

Twelve American Indian (AI) and 12 non-AI participants gambled on a slot-machine simulation and on video poker. Prior to the gambling sessions, half of the participants consumed alcohol while the other half consumed a placebo beverage. They then played the slot-machine simulation three times, with the percentage of programmed "near misses" varying…

Health innovation for patient safety improvement.

PubMed

Sellappans, Renukha; Chua, Siew Siang; Tajuddin, Nur Amani Ahmad; Mei Lai, Pauline Siew

2013-01-01

Medication error has been identified as a major factor affecting patient safety. Many innovative efforts such as Computerised Physician Order Entry (CPOE), a Pharmacy Information System, automated dispensing machines and Point of Administration Systems have been carried out with the aim of improving medication safety. However, areas remain that require urgent attention. One main area will be the lack of continuity of care due to the breakdown of communication between multiple healthcare providers. Solutions may include consideration of "health smart cards" that carry vital patient medical information in the form of a "credit card" or use of the Malaysian identification card. However, costs and technical aspects associated with the implementation of this health smart card will be a significant barrier. Security and confidentiality, on the other hand, are expected to be of primary concern to patients. Challenges associated with the implementation of a health smart card might include physician buy-in for use in his or her everyday practice. Training and technical support should also be available to ensure the smooth implementation of this system. Despite these challenges, implementation of a health smart card moves us closer to seamless care in our country, thereby increasing the productivity and quality of healthcare.

Software Support Measurement and Estimating for Oracle Database Applications Using Mark II Function Points

DTIC Science & Technology

1992-12-01

36 V.33. Coe ncint of De minstioi ........................ 37 V3A. F-Raio .................................... 37 V3.5... de ations. Instructions ae defined as lines of code or card images. Thus, a line containin two or mome souce statements counts as one instruction; a...understand the productivity paradox, recall de concept of virtual machines. When a higher level machine groups ogether many instructm of a lower level

Practical and Secure Recovery of Disk Encryption Key Using Smart Cards

NASA Astrophysics Data System (ADS)

Omote, Kazumasa; Kato, Kazuhiko

In key-recovery methods using smart cards, a user can recover the disk encryption key in cooperation with the system administrator, even if the user has lost the smart card including the disk encryption key. However, the disk encryption key is known to the system administrator in advance in most key-recovery methods. Hence user's disk data may be read by the system administrator. Furthermore, if the disk encryption key is not known to the system administrator in advance, it is difficult to achieve a key authentication. In this paper, we propose a scheme which enables to recover the disk encryption key when the user's smart card is lost. In our scheme, the disk encryption key is not preserved anywhere and then the system administrator cannot know the key before key-recovery phase. Only someone who has a user's smart card and knows the user's password can decrypt that user's disk data. Furthermore, we measured the processing time required for user authentication in an experimental environment using a virtual machine monitor. As a result, we found that this processing time is short enough to be practical.

Optical security features for plastic card documents

NASA Astrophysics Data System (ADS)

Hossick Schott, Joachim

1998-04-01

Print-on-demand is currently a major trend in the production of paper based documents. This fully digital production philosophy will likely have ramifications also for the secure identification document market. Here, plastic cards increasingly replace traditionally paper based security sensitive documents such as drivers licenses and passports. The information content of plastic cards can be made highly secure by using chip cards. However, printed and other optical security features will continue to play an important role, both for machine readable and visual inspection. Therefore, on-demand high resolution print technologies, laser engraving, luminescent pigments and laminated features such as holograms, kinegrams or phase gratings will have to be considered for the production of secure identification documents. Very important are also basic optical, surface and material durability properties of the laminates as well as the strength and nature of the adhesion between the layers. This presentation will address some of the specific problems encountered when optical security features such as high resolution printing and laser engraving are to be integrated in the on-demand production of secure plastic card identification documents.

Agile Machining and Inspection Non-Nuclear Report (NNR) Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lazarus, Lloyd

This report is a high level summary of the eight major projects funded by the Agile Machining and Inspection Non-Nuclear Readiness (NNR) project (FY06.0422.3.04.R1). The largest project of the group is the Rapid Response project in which the six major sub categories are summarized. This project focused on the operations of the machining departments that will comprise Special Applications Machining (SAM) in the Kansas City Responsive Infrastructure Manufacturing & Sourcing (KCRIMS) project. This project was aimed at upgrading older machine tools, developing new inspection tools, eliminating Classified Removable Electronic Media (CREM) in the handling of classified Numerical Control (NC) programsmore » by installing the CRONOS network, and developing methods to automatically load Coordinated-Measuring Machine (CMM) inspection data into bomb books and product score cards. Finally, the project personnel leaned perations of some of the machine tool cells, and now have the model to continue this activity.« less

Explicit 2-D Hydrodynamic FEM Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Jerry

1996-08-07

DYNA2D* is a vectorized, explicit, two-dimensional, axisymmetric and plane strain finite element program for analyzing the large deformation dynamic and hydrodynamic response of inelastic solids. DYNA2D* contains 13 material models and 9 equations of state (EOS) to cover a wide range of material behavior. The material models implemented in all machine versions are: elastic, orthotropic elastic, kinematic/isotropic elastic plasticity, thermoelastoplastic, soil and crushable foam, linear viscoelastic, rubber, high explosive burn, isotropic elastic-plastic, temperature-dependent elastic-plastic. The isotropic and temperature-dependent elastic-plastic models determine only the deviatoric stresses. Pressure is determined by one of 9 equations of state including linear polynomial, JWL highmore » explosive, Sack Tuesday high explosive, Gruneisen, ratio of polynomials, linear polynomial with energy deposition, ignition and growth of reaction in HE, tabulated compaction, and tabulated.« less

The Evaluation of Efficiency of the Use of Machine Working Time in the Industrial Company - Case Study

NASA Astrophysics Data System (ADS)

Kardas, Edyta; Brožova, Silvie; Pustějovská, Pavlína; Jursová, Simona

2017-12-01

In the paper the evaluation of efficiency of the use of machines in the selected production company was presented. The OEE method (Overall Equipment Effectiveness) was used for the analysis. The selected company deals with the production of tapered roller bearings. The analysis of effectiveness was done for 17 automatic grinding lines working in the department of grinding rollers. Low level of efficiency of machines was affected by problems with the availability of machines and devices. The causes of machine downtime on these lines was also analyzed. Three basic causes of downtime were identified: no kanban card, diamonding, no operator. Ways to improve the use of these machines were suggested. The analysis takes into account the actual results from the production process and covers the period of one calendar year.

Asynchronous machine rotor speed estimation using a tabulated numerical approach

NASA Astrophysics Data System (ADS)

Nguyen, Huu Phuc; De Miras, Jérôme; Charara, Ali; Eltabach, Mario; Bonnet, Stéphane

2017-12-01

This paper proposes a new method to estimate the rotor speed of the asynchronous machine by looking at the estimation problem as a nonlinear optimal control problem. The behavior of the nonlinear plant model is approximated off-line as a prediction map using a numerical one-step time discretization obtained from simulations. At each time-step, the speed of the induction machine is selected satisfying the dynamic fitting problem between the plant output and the predicted output, leading the system to adopt its dynamical behavior. Thanks to the limitation of the prediction horizon to a single time-step, the execution time of the algorithm can be completely bounded. It can thus easily be implemented and embedded into a real-time system to observe the speed of the real induction motor. Simulation results show the performance and robustness of the proposed estimator.

Development and Implementation of a Simplified Tool Measuring System

NASA Astrophysics Data System (ADS)

Chen, Jenn-Yih; Lee, Bean-Yin; Lee, Kuang-Chyi; Chen, Zhao-Kai

2010-01-01

This paper presents a simplified system for measuring geometric profiles of end mills. Firstly, a CCD camera was used to capture images of cutting tools. Then, an image acquisition card with the encoding function was adopted to convert the source of image into an USB port of a PC, and the image could be shown on a monitor. In addition, two linear scales were mounted on the X-Y table for positioning and measuring purposes. The signals of the linear scales were transmitted into a 4-axis quadrature encoder with 4-channel counter card for position monitoring. The C++ Builder was utilized for designing the user friendly human machine interface of the measuring system of tools. There is a cross line on the image of the interface to show a coordinate for the position measurement. Finally, a well-known tool measuring and inspection machine was employed for the measuring standard. This study compares the difference of the measuring results by using the machine and the proposed system. Experimental results show that the percentage of measuring error is acceptable for some geometric parameters of the square or ball nose end mills. Therefore, the results demonstrate the effectiveness of the presented approach.

Study of the NASTRAN input/output systems

NASA Technical Reports Server (NTRS)

Brown, W. K.; Schoellmann, W. F.

1977-01-01

The basic characteristics of the NASTRAN level 16 I/O subsystem are presented with particular reference to blocking/deblocking aspects, I/O methods used on the IBM, CDC, and UNIVAC machines, definition of basic NASTRAN I/O control tables, and portability of parts of the I/O subsystem to other programs outside the NASTRAN environment are included. An explanation of the IBM primary, secondary, and tertiary files defined by the data definition (DD) cards in the NASTRAN JCL procedure. The explanation is intended to enlighten users as to the purpose of these DD cards, how they relate to one another, and why there are no similar type definition cards required on the CDC and UNIVAC versions. Enhancements designed to increase overall efficiency and decrease core requirements are also recommended.

36 CFR 1254.82 - What limitations apply to my use of self-service card-operated copiers?

Code of Federal Regulations, 2011 CFR

2011-07-01

... NATIONAL ARCHIVES AND RECORDS ADMINISTRATION PUBLIC AVAILABILITY AND USE USING RECORDS AND DONATED..., we may limit you to three copies when others are waiting to use the machine. If you wish to copy...

36 CFR 1254.82 - What limitations apply to my use of self-service card-operated copiers?

Code of Federal Regulations, 2010 CFR

2010-07-01

... NATIONAL ARCHIVES AND RECORDS ADMINISTRATION PUBLIC AVAILABILITY AND USE USING RECORDS AND DONATED..., we may limit you to three copies when others are waiting to use the machine. If you wish to copy...

Outcome-Driven Service Provider Performance under Conditions of Complexity and Uncertainty, Defense Acquisition in Transition, Volume 2, 13-14 May 2009.

DTIC Science & Technology

2009-04-22

bandwidth and response times. Forrester Research uses the analogy of a consumer using an automated teller machine to explain how technical SLAs should...be crafted. “It’s not enough that you put your card and Personal Identification Number (PIN) [in the machine ] and request to withdraw cash...IRR) Net Present Value (NPV) Other Relevant Metrics Payback Period Cost/Benefit Ratio Cost, Economic, and/or Financial Analysis Yes Yes Yes

Resource Sharing in a Network of Personal Computers.

DTIC Science & Technology

1982-12-01

magnetic card, or a more secure identifier such as a machine-read fingerprint or voiceprint. Security and Protection 57 (3) (R, key) (5) (RB’ B, key) (B...operations are invoked via messages, a program and its terminal can easily be located on separate machines. In Spice, an interface process called Canvas ...request of a process. In Canvas , a process can only subdivide windows that it already has. On the other hand, the window manager treats the screen as a

Recirculating Electron Accelerators with Noncircular Electron Orbits as Radiation Sources for Applications (a Review)

NASA Astrophysics Data System (ADS)

Dubinov, Alexander E.; Ochkina, Elena I.

2018-05-01

State-of-the-art compact recirculating electron accelerators operating at intermediate energies (tens of MeV) are reviewed. The acceleration schemes implemented in the rhodotron, ridgetron, fantron, and cylindertron machines are discussed. Major accelerator components such as the electron guns, accelerating cavities, and bending magnets are described. The parameters of currently operating recirculating accelerators are tabulated, and applications of these accelerators in different processes of irradiation are exemplified.

Advent of Greige Cotton Nonwovens Made By Hydro-Entanglement Process

USDA-ARS?s Scientific Manuscript database

Using greige (scour/bleachless) cotton, a few nonwoven fabrics have been successfully produced by adopting conventional fiber opening, cleaning and (modified) carding machines followed by cross-lapping, pre/light needling, and hydro-entanglement (H-E) on modern commercial machinery and equipment. Us...

A cost-effective add-on-value card-assisted firewall over Taiwan's NHI VPN framework.

PubMed

Huang, Jyh-Win; Hou, Ting-Wei

2007-06-01

Besides the overall budget for building the infrastructure of a healthcare-service-based virtual private network (VPN) in Taiwan, two issues were considered critical for its acceptance by the country's 17,000 plus medical institutions. One was who was to pay for the network (ADSL or modem) connection fee; the other was who was to pay for the firewall/anti-virus software. This paper addresses the second issue by proposing an efficient freeware firewall, named card-assisted firewall (CAF), for NHI VPN edge-hosts, which is also an add-on-value application of the National Healthcare IC card that every insurant and medical professional has. The innovative concept is that any NHI VPN site (edge-host) can establish diversified secure-authenticated connections with other sites only by an authentication mechanism, which requires a NHI Java card state machine and the Access Control List of the host. It is different from two-factor authentication cards in four ways: (1) a PIN code is not a must; (2) it requires authentication with the remote IC card Data Centre; (3) the NHI cards are already available, no modification is needed, and there is no further cost for the deployment of the cards; (4) although the cards are in the reader, the communication cannot start unless the cards are in the corresponding states; i.e. the states allow communication. An implementation, on a Microsoft Windows XP platform, demonstrated the system's feasibility over an emulation of the NHI VPN framework. It maintained a high line speed, the driver took up 39 KB of disk space, installation was simple, not requiring any extra hardware or software, and the average packet processing time of the CAF driver measured was 0.3084 ms. The average overhead in comparing the Access Control List predefined routing in card, in an FTP testing experiment, was 5.7 micros (receiving) and 8 micros (sending).

Program documentation for the space environment test division post-test data reduction program (GNFLEX)

NASA Technical Reports Server (NTRS)

Jones, L. D.

1979-01-01

The Space Environment Test Division Post-Test Data Reduction Program processes data from test history tapes generated on the Flexible Data System in the Space Environment Simulation Laboratory at the National Aeronautics and Space Administration/Lyndon B. Johnson Space Center. The program reads the tape's data base records to retrieve the item directory conversion file, the item capture file and the process link file to determine the active parameters. The desired parameter names are read in by lead cards after which the periodic data records are read to determine parameter data level changes. The data is considered to be compressed rather than full sample rate. Tabulations and/or a tape for generating plots may be output.

Translations on Eastern Europe Scientific Affairs, Number 560

DTIC Science & Technology

1977-10-04

Miklos Szilagyi . TAPNEG; prepares digitalized printed wiring diagram control punch tape on an ADMAP-2 graphing machine with reflection on the x axis...FOKAL 16 KE; BME, Dr Zsolt Illyefalvi-Vitez; BME, Dr Miklos Szilagyi . TESTOP-10; the program provides measurement and diagnostics for logic cards

Influence of fiber quality on draftometer measurements

USDA-ARS?s Scientific Manuscript database

Fiber-to-fiber and fiber-to-machine friction play an important role in determining textile processing efficiency and end-product quality. A process, known as drafting, is used to control the attenuation of the fiber mass being processed in carding, drawing and spinning. The amount of attenuation t...

7 CFR 1427.11 - Warehouse receipts.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (Signature or initials), Date. (3) Alterations in other inserted data on a machine card type warehouse... 7 Agriculture 10 2010-01-01 2010-01-01 false Warehouse receipts. 1427.11 Section 1427.11... Deficiency Payments § 1427.11 Warehouse receipts. (a) Producers may obtain loans on eligible cotton...

7 CFR 1427.11 - Warehouse receipts.

Code of Federal Regulations, 2011 CFR

2011-01-01

... (Signature or initials), Date. (3) Alterations in other inserted data on a machine card type warehouse... 7 Agriculture 10 2011-01-01 2011-01-01 false Warehouse receipts. 1427.11 Section 1427.11... Deficiency Payments § 1427.11 Warehouse receipts. (a) Producers may obtain loans on eligible cotton...

23 CFR Appendix A to Part 1313 - Tamper Resistant Driver's License

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Block graphics. (15) Security fonts and graphics with known hidden flaws. (16) Card stock, layer with colors. (17) Micro-graphics. (18) Retroflective security logos. (19) Machine readable technologies such... permit that has one or more of the following security features: (1) Ghost image. (2) Ghost graphic. (3...

11 CFR 104.14 - Formal requirements regarding reports and statements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... statements of independent expenditures filed by facsimile machine or electronic mail under 11 CFR 104.4(b) or...) for requirements relating to preservation of records and accounts); and (4) Candidates, who obtain bank loans or loans derived from an advance from the candidate's brokerage account, credit card, home...

Destruction of Knowledge: A Study of Journal Mutilation at a Large University Library.

ERIC Educational Resources Information Center

Constantinou, Constantia

1995-01-01

A study of 1264 incidents of journal mutilation at New York University indicates no relationship between the availability of indexing and abstracting services on CD-ROM databases and mutilation. Recommends posting warnings; raising awareness; providing adequate photocopiers, change, and vendor card machines; announcing closing time; encouraging…

Oklahoma's Mobile Computer Graphics Laboratory.

ERIC Educational Resources Information Center

McClain, Gerald R.

This Computer Graphics Laboratory houses an IBM 1130 computer, U.C.C. plotter, printer, card reader, two key punch machines, and seminar-type classroom furniture. A "General Drafting Graphics System" (GDGS) is used, based on repetitive use of basic coordinate and plot generating commands. The system is used by 12 institutions of higher education…

Planning for the Automation of School Library Media Centers.

ERIC Educational Resources Information Center

Caffarella, Edward P.

1996-01-01

Geared for school library media specialists whose centers are in the early stages of automation or conversion to a new system, this article focuses on major components of media center automation: circulation control; online public access catalogs; machine readable cataloging; retrospective conversion of print catalog cards; and computer networks…

A Database System for Course Administration.

ERIC Educational Resources Information Center

Benbasat, Izak; And Others

1982-01-01

Describes a computer-assisted testing system which produces multiple-choice examinations for a college course in business administration. The system uses SPIRES (Stanford Public Information REtrieval System) to manage a database of questions and related data, mark-sense cards for machine grading tests, and ACL (6) (Audit Command Language) to…

Data Processing for High School Students

ERIC Educational Resources Information Center

Spiegelberg, Emma Jo

1974-01-01

Data processing should be taught at the high school level so students may develop a general understanding and appreciation for the capabilities and the limitations of these automated data processing systems. Card machines, wiring, logic, flowcharting, and Cobol programing are to be taught, with behavioral objectives for each section listed. (SC)

Tackling Production Techniques: Telling Tales with Transparencies.

ERIC Educational Resources Information Center

Martin, Ron

1986-01-01

This lesson introduces students to procedures for creating both hand-drawn and machine-made transparencies and requires each of them to create one example to illustrate the same story. Detailed plans include performance objectives, materials needed, instructions for presenting the lesson, a sample student task card, and suggestions for evaluating…

12 CFR 195.12 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... with § 195.41. (d) Automated teller machine (ATM) means an automated, unstaffed banking facility owned...) Motor vehicle loan, which is a consumer loan extended for the purchase of and secured by a motor vehicle... means a savings association that offers only a narrow product line (such as credit card or motor vehicle...

12 CFR 195.12 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... with § 195.41. (d) Automated teller machine (ATM) means an automated, unstaffed banking facility owned...) Motor vehicle loan, which is a consumer loan extended for the purchase of and secured by a motor vehicle... means a savings association that offers only a narrow product line (such as credit card or motor vehicle...

12 CFR 195.12 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... with § 195.41. (d) Automated teller machine (ATM) means an automated, unstaffed banking facility owned...) Motor vehicle loan, which is a consumer loan extended for the purchase of and secured by a motor vehicle... means a savings association that offers only a narrow product line (such as credit card or motor vehicle...

ATM Card Cloning and Ethical Considerations.

PubMed

Kaur, Paramjit; Krishan, Kewal; Sharma, Suresh K; Kanchan, Tanuj

2018-05-01

With the advent of modern technology, the way society handles and performs monetary transactions has changed tremendously. The world is moving swiftly towards the digital arena. The use of Automated Teller Machine (ATM) cards (credit and debit) has led to a "cash-less society" and has fostered digital payments and purchases. In addition to this, the trust and reliance of the society upon these small pieces of plastic, having numbers engraved upon them, has increased immensely over the last two decades. In the past few years, the number of ATM fraud cases has increased exponentially. With the money of the people shifting towards the digital platform, ATM skimming has become a problem that has eventually led to a global outcry. The present review discusses the serious repercussions of ATM card cloning and the associated privacy, ethical and legal concerns. The preventive measures which need to be taken and adopted by the government authorities to mitigate the problem have also been discussed.

Reliable optical card-edge (ROC) connector for avionics applications

NASA Astrophysics Data System (ADS)

Darden, Bruce V.; Pimpinella, Richard J.; Seals, John D.

1994-10-01

The Reliable Optical Card-Edge (ROC) Connector is a blind-mate backplane unit designed to meet military stress requirements for avionics applications. Its modular design represents the first significant advance in connector optics since the biconic butt-coupled connector was introduced twenty years ago. This multimode connector utilizes beam optics, micro-machined silicon, and a floating, low mass subassembly design to maintain low coupling loss under high levels of shock and vibration. The ROC connector also incorporates retracting doors to protect the unmated termini from environmental contamination and abusive handling. Design features and test results for the ROC connector are presented in this paper.

Skylab-3 handheld photography alphabetized geographical features list

NASA Technical Reports Server (NTRS)

Mcniel, J. L.; Deyalcourt, C. C.

1974-01-01

The data was thoroughly researched using the Times Index-Gazetteer of the World, the Times Atlas of the World, and the National Atlas of the United States of America to ensure correct spelling and location of named features. The spelling and major geographical features applied to smaller features (minor) such as cities, towns, mountain peaks, etc., are in accordance with these publications. It is understood that some political boundaries and names of countries are subject to change. The data was written on NASA keypunch transmittal sheets and punched into data cards. These data cards were then machine sorted alphabetically by major feature and minor feature.

The TOTEM T1 read out card motherboard

NASA Astrophysics Data System (ADS)

Minutoli, S.; Lo Vetere, M.; Robutti, E.

2010-12-01

This article describes the Read Out Card (ROC) motherboard, which is the main component of the T1 forward telescope front-end electronic system. The ROC main objectives are to acquire tracking data and trigger information from the detector. It performs data conversion from electrical to optical format and transfers the data streams to the next level of the system and it implements Slow Control modules which are able to receive, decode and distribute the LHC machine low jitter clock and fast command. The ROC also provides a spy mezzanine connection based on programmable FPGA and USB2.0 for laboratory and portable DAQ debugging system.

Development and Testing of a Hydropneumatic Suspension System on a USMC AAV7A1

DTIC Science & Technology

1991-07-30

original material, SAE 4140 steel alloy hardened to 30/34 Rc, has a yield strength of 130,000 psi. All of the ISU’s were disassembled and were reassembled...plugged and welded in place. Aluminum I-beams were welded in place in the water jet tunnels to act as jounce stops for the aft suspension units. The...following Is a tabulation of components attributed to the vehicle: 1000 Hull, Welded & machined 1100 Bow Plane 2000 Powertrain 3000 Transmission 4000

3D multiplayer virtual pets game using Google Card Board

NASA Astrophysics Data System (ADS)

Herumurti, Darlis; Riskahadi, Dimas; Kuswardayan, Imam

2017-08-01

Virtual Reality (VR) is a technology which allows user to interact with the virtual environment. This virtual environment is generated and simulated by computer. This technology can make user feel the sensation when they are in the virtual environment. The VR technology provides real virtual environment view for user and it is not viewed from screen. But it needs another additional device to show the view of virtual environment. This device is known as Head Mounted Device (HMD). Oculust Rift and Microsoft Hololens are the most famous HMD devices used in VR. And in 2014, Google Card Board was introduced at Google I/O developers conference. Google Card Board is VR platform which allows user to enjoy the VR with simple and cheap way. In this research, we explore Google Card Board to develop simulation game of raising pet. The Google Card Board is used to create view for the VR environment. The view and control in VR environment is built using Unity game engine. And the simulation process is designed using Finite State Machine (FSM). This FSM can help to design the process clearly. So the simulation process can describe the simulation of raising pet well. Raising pet is fun activity. But sometimes, there are many conditions which cause raising pet become difficult to do, i.e. environment condition, disease, high cost, etc. this research aims to explore and implement Google Card Board in simulation of raising pet.

77 FR 24667 - TANF Assistance and Electronic Benefit Transfer Transactions; Request for Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-25

... Family Assistance (OFA) is interested in learning about how States deliver Temporary Assistance to Needy... types of restrictions on assistance usage. OFA also is interested in learning about States' current... as ``the use of a credit or debit card service, automated teller machine, point-of-sale terminal, or...

Verifying Secrets and Relative Secrecy

DTIC Science & Technology

2000-01-01

Systems that authenticate a user based on a shared secret (such as a password or PIN) normally allow anyone to query whether the secret is a given...value. For example, an ATM machine allows one to ask whether a string is the secret PIN of a (lost or stolen) ATM card. Yet such queries are prohibited

8 CFR 1212.6 - Border crossing identification cards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... seeks to travel temporarily to the United States for business or pleasure without a visa and passport... similar stamp in a passport). (i) A Canadian citizen or other person sharing common nationality with... similar stamp in a passport) issued by the DOS prior to April 1, 1998, that does not contain a machine...

8 CFR 1212.6 - Border crossing identification cards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... seeks to travel temporarily to the United States for business or pleasure without a visa and passport... similar stamp in a passport). (i) A Canadian citizen or other person sharing common nationality with... similar stamp in a passport) issued by the DOS prior to April 1, 1998, that does not contain a machine...

8 CFR 1212.6 - Border crossing identification cards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... seeks to travel temporarily to the United States for business or pleasure without a visa and passport... similar stamp in a passport). (i) A Canadian citizen or other person sharing common nationality with... similar stamp in a passport) issued by the DOS prior to April 1, 1998, that does not contain a machine...

8 CFR 1212.6 - Border crossing identification cards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... seeks to travel temporarily to the United States for business or pleasure without a visa and passport... similar stamp in a passport). (i) A Canadian citizen or other person sharing common nationality with... similar stamp in a passport) issued by the DOS prior to April 1, 1998, that does not contain a machine...

8 CFR 1212.6 - Border crossing identification cards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... seeks to travel temporarily to the United States for business or pleasure without a visa and passport... similar stamp in a passport). (i) A Canadian citizen or other person sharing common nationality with... similar stamp in a passport) issued by the DOS prior to April 1, 1998, that does not contain a machine...

11 CFR 104.14 - Formal requirements regarding reports and statements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... statements of independent expenditures filed by facsimile machine or electronic mail under 11 CFR 104.4(b) or... bank loans or loans derived from an advance from the candidate's brokerage account, credit card, home... for all payments made on the loan by any person. (c) Acknowledgements by the Commission or the...

Retrospective Conversion at a Two-Year College.

ERIC Educational Resources Information Center

Krieger, Michael T.

1982-01-01

Findings of a project to convert a single LC class from cards to machine readable tapes at a two-year college suggest that an in-house retrospective conversion is feasible for academic libraries. A high conversion hit rate, implying minimal original cataloging, will keep project costs and duration low. There are five references. (RAA)

Vatican Library Automates for the 21st Century.

ERIC Educational Resources Information Center

Carter, Thomas L.

1994-01-01

Because of space and staff constraints, the Vatican Library can issue only 2,000 reader cards a year. Describes IBM's Vatican Library Project: converting the library catalog records (prior to 1985) into machine readable form and digitally scanning 20,000 manuscript pages, print pages, and art works in gray scale and color, creating a database…

12 CFR 563e.12 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... with § 563e.41. (d) Automated teller machine (ATM) means an automated, unstaffed banking facility owned... include the following categories of loans: (1) Motor vehicle loan, which is a consumer loan extended for the purchase of and secured by a motor vehicle; (2) Credit card loan, which is a line of credit for...

12 CFR 563e.12 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... with § 563e.41. (d) Automated teller machine (ATM) means an automated, unstaffed banking facility owned... include the following categories of loans: (1) Motor vehicle loan, which is a consumer loan extended for the purchase of and secured by a motor vehicle; (2) Credit card loan, which is a line of credit for...

12 CFR 563e.12 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... with § 563e.41. (d) Automated teller machine (ATM) means an automated, unstaffed banking facility owned... include the following categories of loans: (1) Motor vehicle loan, which is a consumer loan extended for the purchase of and secured by a motor vehicle; (2) Credit card loan, which is a line of credit for...

40 CFR 85.1905 - Alternative report formats.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Alternative report formats. 85.1905... Alternative report formats. (a) Any manufacturer may submit a plan for making either of the reports required by §§ 85.1903 and 85.1904 on computer cards, magnetic tape or other machine readable format. The...

40 CFR 85.1905 - Alternative report formats.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Alternative report formats. 85.1905... Alternative report formats. (a) Any manufacturer may submit a plan for making either of the reports required by §§ 85.1903 and 85.1904 on computer cards, magnetic tape or other machine readable format. The...

40 CFR 85.1905 - Alternative report formats.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Alternative report formats. 85.1905... Alternative report formats. (a) Any manufacturer may submit a plan for making either of the reports required by §§ 85.1903 and 85.1904 on computer cards, magnetic tape or other machine readable format. The...

40 CFR 85.1905 - Alternative report formats.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Alternative report formats. 85.1905... Alternative report formats. (a) Any manufacturer may submit a plan for making either of the reports required by §§ 85.1903 and 85.1904 on computer cards, magnetic tape or other machine readable format. The...

The new ATLAS/LUCID detector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruschi, Marco

The new ATLAS luminosity monitor has many innovative aspects implemented. Its photomultipliers tubes are used as detector elements by using the Cherenkov light produced by charged particles above threshold crossing the quartz windows. The analog shaping of the readout chain has been improved, in order to cope with the 25 ns bunch spacing of the LHC machine. The main readout card is a quite general processing unit based on 12 bit - 500 MS/s Flash ADC and on FPGAs, delivering the processed data to 1.3 Gb/s optical links. The article will describe all these aspects and will outline future perspectivesmore » of the card for next generation high energy physics experiments. (authors)« less

RAMONA-4B a computer code with three-dimensional neutron kinetics for BWR and SBWR system transient - user`s manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rohatgi, U.S.; Cheng, H.S.; Khan, H.J.

This document is the User`s Manual for the Boiling Water Reactor (BWR), and Simplified Boiling Water Reactor (SBWR) systems transient code RAMONA-4B. The code uses a three-dimensional neutron-kinetics model coupled with a multichannel, nonequilibrium, drift-flux, phase-flow model of the thermal hydraulics of the reactor vessel. The code is designed to analyze a wide spectrum of BWR core and system transients. Chapter 1 gives an overview of the code`s capabilities and limitations; Chapter 2 describes the code`s structure, lists major subroutines, and discusses the computer requirements. Chapter 3 is on code, auxillary codes, and instructions for running RAMONA-4B on Sun SPARCmore » and IBM Workstations. Chapter 4 contains component descriptions and detailed card-by-card input instructions. Chapter 5 provides samples of the tabulated output for the steady-state and transient calculations and discusses the plotting procedures for the steady-state and transient calculations. Three appendices contain important user and programmer information: lists of plot variables (Appendix A) listings of input deck for sample problem (Appendix B), and a description of the plotting program PAD (Appendix C). 24 refs., 18 figs., 11 tabs.« less

25 CFR 542.2 - What are the definitions for this part?

Code of Federal Regulations, 2011 CFR

2011-04-01

... games, or gaming machines on a per day or cumulative basis. Ante means a player's initial wager or... in and supervising the operation and conduct of a craps game. Breakage means the difference between.... Card game means a game in which the gaming operation is not party to wagers and from which the gaming...

25 CFR 542.2 - What are the definitions for this part?

Code of Federal Regulations, 2013 CFR

2013-04-01

... games, or gaming machines on a per day or cumulative basis. Ante means a player's initial wager or... in and supervising the operation and conduct of a craps game. Breakage means the difference between.... Card game means a game in which the gaming operation is not party to wagers and from which the gaming...

25 CFR 502.4 - Class III gaming.

Code of Federal Regulations, 2014 CFR

2014-04-01

... II gaming, including but not limited to: (a) Any house banking game, including but not limited to— (1) Card games such as baccarat, chemin de fer, blackjack (21), and pai gow (if played as house banking games); (2) Casino games such as roulette, craps, and keno; (b) Any slot machines as defined in 15 U.S.C...

25 CFR 542.2 - What are the definitions for this part?

Code of Federal Regulations, 2010 CFR

2010-04-01

... games, or gaming machines on a per day or cumulative basis. Ante means a player's initial wager or... in and supervising the operation and conduct of a craps game. Breakage means the difference between.... Card game means a game in which the gaming operation is not party to wagers and from which the gaming...

25 CFR 542.2 - What are the definitions for this part?

Code of Federal Regulations, 2012 CFR

2012-04-01

... games, or gaming machines on a per day or cumulative basis. Ante means a player's initial wager or... in and supervising the operation and conduct of a craps game. Breakage means the difference between.... Card game means a game in which the gaming operation is not party to wagers and from which the gaming...

25 CFR 502.4 - Class III gaming.

Code of Federal Regulations, 2013 CFR

2013-04-01

... II gaming, including but not limited to: (a) Any house banking game, including but not limited to— (1) Card games such as baccarat, chemin de fer, blackjack (21), and pai gow (if played as house banking games); (2) Casino games such as roulette, craps, and keno; (b) Any slot machines as defined in 15 U.S.C...

25 CFR 542.2 - What are the definitions for this part?

Code of Federal Regulations, 2014 CFR

2014-04-01

... games, or gaming machines on a per day or cumulative basis. Ante means a player's initial wager or... in and supervising the operation and conduct of a craps game. Breakage means the difference between.... Card game means a game in which the gaming operation is not party to wagers and from which the gaming...

25 CFR 502.4 - Class III gaming.

Code of Federal Regulations, 2011 CFR

2011-04-01

... II gaming, including but not limited to: (a) Any house banking game, including but not limited to— (1) Card games such as baccarat, chemin de fer, blackjack (21), and pai gow (if played as house banking games); (2) Casino games such as roulette, craps, and keno; (b) Any slot machines as defined in 15 U.S.C...

25 CFR 502.4 - Class III gaming.

Code of Federal Regulations, 2012 CFR

2012-04-01

... II gaming, including but not limited to: (a) Any house banking game, including but not limited to— (1) Card games such as baccarat, chemin de fer, blackjack (21), and pai gow (if played as house banking games); (2) Casino games such as roulette, craps, and keno; (b) Any slot machines as defined in 15 U.S.C...

25 CFR 502.4 - Class III gaming.

Code of Federal Regulations, 2010 CFR

2010-04-01

... II gaming, including but not limited to: (a) Any house banking game, including but not limited to— (1) Card games such as baccarat, chemin de fer, blackjack (21), and pai gow (if played as house banking games); (2) Casino games such as roulette, craps, and keno; (b) Any slot machines as defined in 15 U.S.C...

Carding Machine Operator 8-27.77 -- Technical Report on Standardization of the General Aptitude Test Battery.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

California State Library: Processing Center Design and Specifications. Volume I, System Description and Input Processing.

ERIC Educational Resources Information Center

Sherman, Don; Shoffner, Ralph M.

The scope of the California State Library-Processing Center (CSL-PC) project is to develop the design and specifications for a computerized technical processing center to provide services to a network of participating California libraries. Immediate objectives are: (1) retrospective conversion of card catalogs to a machine-form data base,…

50 Years of Army Computing From ENIAC to MSRC

DTIC Science & Technology

2000-09-01

processing capability. The scientifi c visualization program was started in 1984 to provide tools and expertise to help researchers graphically...and materials, forces modeling, nanoelectronics, electromagnetics and acoustics, signal image processing , and simulation and modeling. The ARL...mechanical and electrical calculating equipment, punch card data processing equipment, analog computers, and early digital machines. Before beginning, we

Isothermal thermogravimetric data acquisition analysis system

NASA Technical Reports Server (NTRS)

Cooper, Kenneth, Jr.

1991-01-01

The description of an Isothermal Thermogravimetric Analysis (TGA) Data Acquisition System is presented. The system consists of software and hardware to perform a wide variety of TGA experiments. The software is written in ANSI C using Borland's Turbo C++. The hardware consists of a 486/25 MHz machine with a Capital Equipment Corp. IEEE488 interface card. The interface is to a Hewlett Packard 3497A data acquisition system using two analog input cards and a digital actuator card. The system provides for 16 TGA rigs with weight and temperature measurements from each rig. Data collection is conducted in three phases. Acquisition is done at a rapid rate during initial startup, at a slower rate during extended data collection periods, and finally at a fast rate during shutdown. Parameters controlling the rate and duration of each phase are user programmable. Furnace control (raising and lowering) is also programmable. Provision is made for automatic restart in the event of power failure or other abnormal terminations. Initial trial runs were conducted to show system stability.

Secure Key Storage with PUFs

NASA Astrophysics Data System (ADS)

Skoric, Boris; Schrijen, Geert-Jan; Tuyls, Pim; Ignatenko, Tanya; Willems, Frans

Nowadays, people carry around devices (cell phones, PDAs, bank passes, etc.) that have a high value. That value is often contained in the data stored in it or lies in the services the device can grant access to (by using secret identification information stored in it). These devices often operate in hostile environments and their protection level is not adequate to deal with that situation. Bank passes and credit cards contain a magnetic stripe where identification information is stored. In the case of bank passes, a PIN is additionally required to withdraw money from an ATM (Automated Teller Machine). At various occasions, it has been shown that by placing a small coil in the reader, the magnetic information stored in the stripe can easily be copied and used to produce a cloned card. Together with eavesdropping the PIN (by listening to the keypad or recording it with a camera), an attacker can easily impersonate the legitimate owner of the bank pass by using the cloned card in combination with the eavesdropped PIN.

Optical Storage System For Small Software Package Distribution

NASA Astrophysics Data System (ADS)

Wehrenberg, Paul J.

1985-04-01

This paper describes an optical mass storage system being developed for extremely low cost distribution of small software packages. The structure of the media, design of the optical playback system, and some aspects of mastering and media production are discussed. This read only system is designed solely for the purpose of down loading code in a spooling fashion from the media to the host machine. The media is configured as a plastic card with dimensions 85 mm x 12 mm x 2mm. Each data region on a card is a rectangle 1.33 mm x 59.4 mm which carries up to 64 KB of user data. Cost estimates for production are 0.06 per card for the media and 38.00 for the playback device. The mastering process for the production tooling uses photolithography techniques and can provide production tooling within a few hours of software release. The playback mechanism is rugged and small, and does not require the use of any electromechanical servos.

Thread-Level Parallelization and Optimization of NWChem for the Intel MIC Architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shan, Hongzhang; Williams, Samuel; Jong, Wibe de

In the multicore era it was possible to exploit the increase in on-chip parallelism by simply running multiple MPI processes per chip. Unfortunately, manycore processors' greatly increased thread- and data-level parallelism coupled with a reduced memory capacity demand an altogether different approach. In this paper we explore augmenting two NWChem modules, triples correction of the CCSD(T) and Fock matrix construction, with OpenMP in order that they might run efficiently on future manycore architectures. As the next NERSC machine will be a self-hosted Intel MIC (Xeon Phi) based supercomputer, we leverage an existing MIC testbed at NERSC to evaluate our experiments.more » In order to proxy the fact that future MIC machines will not have a host processor, we run all of our experiments in tt native mode. We found that while straightforward application of OpenMP to the deep loop nests associated with the tensor contractions of CCSD(T) was sufficient in attaining high performance, significant effort was required to safely and efficiently thread the TEXAS integral package when constructing the Fock matrix. Ultimately, our new MPI OpenMP hybrid implementations attain up to 65x better performance for the triples part of the CCSD(T) due in large part to the fact that the limited on-card memory limits the existing MPI implementation to a single process per card. Additionally, we obtain up to 1.6x better performance on Fock matrix constructions when compared with the best MPI implementations running multiple processes per card.« less

Thread-level parallelization and optimization of NWChem for the Intel MIC architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shan, Hongzhang; Williams, Samuel; de Jong, Wibe

In the multicore era it was possible to exploit the increase in on-chip parallelism by simply running multiple MPI processes per chip. Unfortunately, manycore processors' greatly increased thread- and data-level parallelism coupled with a reduced memory capacity demand an altogether different approach. In this paper we explore augmenting two NWChem modules, triples correction of the CCSD(T) and Fock matrix construction, with OpenMP in order that they might run efficiently on future manycore architectures. As the next NERSC machine will be a self-hosted Intel MIC (Xeon Phi) based supercomputer, we leverage an existing MIC testbed at NERSC to evaluate our experiments.more » In order to proxy the fact that future MIC machines will not have a host processor, we run all of our experiments in native mode. We found that while straightforward application of OpenMP to the deep loop nests associated with the tensor contractions of CCSD(T) was sufficient in attaining high performance, significant e ort was required to safely and efeciently thread the TEXAS integral package when constructing the Fock matrix. Ultimately, our new MPI+OpenMP hybrid implementations attain up to 65× better performance for the triples part of the CCSD(T) due in large part to the fact that the limited on-card memory limits the existing MPI implementation to a single process per card. Additionally, we obtain up to 1.6× better performance on Fock matrix constructions when compared with the best MPI implementations running multiple processes per card.« less

California State Library: Processing Center Design and Specifications. Volume III, Coding Manual.

ERIC Educational Resources Information Center

Sherman, Don; Shoffner, Ralph M.

As part of the report on the California State Library Processing Center design and specifications, this volume is a coding manual for the conversion of catalog card data to a machine-readable form. The form is compatible with the national MARC system, while at the same time it contains provisions for problems peculiar to the local situation. This…

An Evaluation of the Effectiveness of a Self-Tutoring Approach Applied to Pilot Training.

ERIC Educational Resources Information Center

Hatch, Richard S.

One of the critical aspects of the pilot's job is the requirement for accurate and ready recall of a large body of flight information. The effectiveness of a voluntary self-tutoring device to facilitate information acquisition and retention was examined. The device was a card machine which presented and scored responses to multiple choice…

1. Perspective view of east and south elevations of Riverdale ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Perspective view of east and south elevations of Riverdale Cotton Mill. The spinning room is located on the third floor, carding room on second floor and machine/maintenance shop on first floor. South elevation of Georgia Power powerhouse adjacent to Riverdale Mill appears on right. - Riverdale Cotton Mill, Corner of Middle & Lower Streets, Valley, Chambers County, AL

High School and Beyond. 1980 Senior Cohort. First Follow-Up (1982). [machine-readable data file].

ERIC Educational Resources Information Center

National Center for Education Statistics (ED), Washington, DC.

The High School and Beyond 1980 Senior Cohort First Follow-Up (1982) Data File is presented. The First Follow-Up Senior Cohort data tape consists of four related data files: (1) the student data file (including data availability flags, weights, questionnaire data, and composite variables); (2) Statistical Analysis System (SAS) control cards for…

26 CFR 1.6050W-1 - Information reporting for payments made in settlement of payment card and third party network...

Code of Federal Regulations, 2012 CFR

2012-04-01

... funds at an automated teller machine, or to obtain a cash advance or loan against the cardholder's... transactions with B exceeds 200 (as provided in paragraph (c)(4) of this section). Example 3. Automated clearinghouse network. A operates an automated clearinghouse (“ACH”) network that merely processes electronic...

26 CFR 1.6050W-1 - Information reporting for payments made in settlement of payment card and third party network...

Code of Federal Regulations, 2013 CFR

2013-04-01

... funds at an automated teller machine, or to obtain a cash advance or loan against the cardholder's... transactions with B exceeds 200 (as provided in paragraph (c)(4) of this section). Example 3. Automated clearinghouse network. A operates an automated clearinghouse (“ACH”) network that merely processes electronic...

12 CFR Appendix A to Part 1005 - Model Disclosure Clauses and Forms

Code of Federal Regulations, 2014 CFR

2014-01-01

... line of credit). If you tell us within 2 business days after you learn of the loss or theft of your....) If you do NOT tell us within 2 business days after you learn of the loss or theft of your [card... our [automated teller machines] [telephone bill-payment service] [point-of-sale transfer service]. (2...

Document fraud deterrent strategies: four case studies

NASA Astrophysics Data System (ADS)

Mercer, John W.

1998-04-01

This paper discusses the approaches taken to deter fraud committed against four documents: the machine-readable passport; the machine-readable visa; the Consular Report of Birth Abroad; and the Border Crossing Card. General approaches are discussed first, with an emphasis on the reasons for the document, the conditions of its use and the information systems required for it to function. A cost model of counterfeit deterrence is introduced. Specific approaches to each of the four documents are then discussed, in light of the issuance circumstances and criteria, the intent of the issuing authority, the applicable international standards and the level of protection and fraud resistance appropriate for the document.

Flexible Peripheral Component Interconnect Input/Output Card

NASA Technical Reports Server (NTRS)

Bigelow, Kirk K.; Jerry, Albert L.; Baricio, Alisha G.; Cummings, Jon K.

2010-01-01

The Flexible Peripheral Component Interconnect (PCI) Input/Output (I/O) Card is an innovative circuit board that provides functionality to interface between a variety of devices. It supports user-defined interrupts for interface synchronization, tracks system faults and failures, and includes checksum and parity evaluation of interface data. The card supports up to 16 channels of high-speed, half-duplex, low-voltage digital signaling (LVDS) serial data, and can interface combinations of serial and parallel devices. Placement of a processor within the field programmable gate array (FPGA) controls an embedded application with links to host memory over its PCI bus. The FPGA also provides protocol stacking and quick digital signal processor (DSP) functions to improve host performance. Hardware timers, counters, state machines, and other glue logic support interface communications. The Flexible PCI I/O Card provides an interface for a variety of dissimilar computer systems, featuring direct memory access functionality. The card has the following attributes: 8/16/32-bit, 33-MHz PCI r2.2 compliance, Configurable for universal 3.3V/5V interface slots, PCI interface based on PLX Technology's PCI9056 ASIC, General-use 512K 16 SDRAM memory, General-use 1M 16 Flash memory, FPGA with 3K to 56K logical cells with embedded 27K to 198K bits RAM, I/O interface: 32-channel LVDS differential transceivers configured in eight, 4-bit banks; signaling rates to 200 MHz per channel, Common SCSI-3, 68-pin interface connector.

2. DETAIL VIEW OF MAIN ELEVATION OF MILL, LOOKING NORTHWEST. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. DETAIL VIEW OF MAIN ELEVATION OF MILL, LOOKING NORTHWEST. NOTE ORIGINAL WINDOWS ON UPPER FLOORS. THE TOP FLOOR CONTAINED SPINNING AND TWISTER EQUIPMENT, THE SECOND FLOOR THE CARD ROOM AND ADDITIONAL SPINNING, AND THE GROUND FLOOR WEAVING, THE CLOTH ROOM, AND SHIPPING. A PARTIAL BASEMENT CONTAINED A MACHINE SHOP, SUPPLY DEPARTMENT, AND OVERFLOW COTTON STORAGE. - Stark Mill, 117 Corinth Road, Hogansville, Troup County, GA

THE COMPUTER AS A MANAGEMENT TOOL--PHYSICAL FACILITIES INVENTORIES, UTILIZATION, AND PROJECTIONS. 11TH ANNUAL MACHINE RECORDS CONFERENCE PROCEEDINGS (UNIVERSITY OF TENNESSEE, KNOXVILLE, APRIL 25-27, 1966).

ERIC Educational Resources Information Center

WITMER, DAVID R.

WISCONSIN STATE UNIVERSITIES HAVE BEEN USING THE COMPUTER AS A MANAGEMENT TOOL TO STUDY PHYSICAL FACILITIES INVENTORIES, SPACE UTILIZATION, AND ENROLLMENT AND PLANT PROJECTIONS. EXAMPLES ARE SHOWN GRAPHICALLY AND DESCRIBED FOR DIFFERENT TYPES OF ANALYSIS, SHOWING THE CARD FORMAT, CODING SYSTEMS, AND PRINTOUT. EQUATIONS ARE PROVIDED FOR DETERMINING…

Dissolvable fluidic time delays for programming multi-step assays in instrument-free paper diagnostics.

PubMed

Lutz, Barry; Liang, Tinny; Fu, Elain; Ramachandran, Sujatha; Kauffman, Peter; Yager, Paul

2013-07-21

Lateral flow tests (LFTs) are an ingenious format for rapid and easy-to-use diagnostics, but they are fundamentally limited to assay chemistries that can be reduced to a single chemical step. In contrast, most laboratory diagnostic assays rely on multiple timed steps carried out by a human or a machine. Here, we use dissolvable sugar applied to paper to create programmable flow delays and present a paper network topology that uses these time delays to program automated multi-step fluidic protocols. Solutions of sucrose at different concentrations (10-70% of saturation) were added to paper strips and dried to create fluidic time delays spanning minutes to nearly an hour. A simple folding card format employing sugar delays was shown to automate a four-step fluidic process initiated by a single user activation step (folding the card); this device was used to perform a signal-amplified sandwich immunoassay for a diagnostic biomarker for malaria. The cards are capable of automating multi-step assay protocols normally used in laboratories, but in a rapid, low-cost, and easy-to-use format.

Dissolvable fluidic time delays for programming multi-step assays in instrument-free paper diagnostics

PubMed Central

Lutz, Barry; Liang, Tinny; Fu, Elain; Ramachandran, Sujatha; Kauffman, Peter; Yager, Paul

2013-01-01

Lateral flow tests (LFTs) are an ingenious format for rapid and easy-to-use diagnostics, but they are fundamentally limited to assay chemistries that can be reduced to a single chemical step. In contrast, most laboratory diagnostic assays rely on multiple timed steps carried out by a human or a machine. Here, we use dissolvable sugar applied to paper to create programmable flow delays and present a paper network topology that uses these time delays to program automated multi-step fluidic protocols. Solutions of sucrose at different concentrations (10-70% of saturation) were added to paper strips and dried to create fluidic time delays spanning minutes to nearly an hour. A simple folding card format employing sugar delays was shown to automate a four-step fluidic process initiated by a single user activation step (folding the card); this device was used to perform a signal-amplified sandwich immunoassay for a diagnostic biomarker for malaria. The cards are capable of automating multi-step assay protocols normally used in laboratories, but in a rapid, low-cost, and easy-to-use format. PMID:23685876

Evaluation of using ferrofluid as an interface material for a field-reversible thermal connector

NASA Astrophysics Data System (ADS)

Yousif, Ahmed S.

The electrical functionality of an avionics chassis is limited due to heat dissipation limits. The limits arise due to the fact that components in an avionic computer boxes are packed very compactly, with the components mounted onto plug-in cards, and the harsh environment experienced by the chassis limits how heat can be dissipated from the cards. Convective and radiative heat transfer to the ambient are generally not possible. Therefore it is necessary to have heat transferred from the components conducted to the edge of the plug-in cards. The heat then needs to conduct from the card edge to a cold block that not only holds the card in place, but also removes the generated heat by some heat transfer fluid that is circulated through the cold block. The interface between the plug-in card and the cold block typically has a high thermal resistance since it is necessary for the card to have the capability to be re-workable, meaning that the card can be removed and then returned to the chassis. Reducing the thermal resistance of the interface is the objective of the current study and the topic of this thesis. The current design uses a pressure interface between the card and cold block. The contact pressure is increased through the addition of a wedgelock, which is a field-reversible mechanical connector. To use a wedgelock, the cold block has channels milled on the surface with widths that are larger than the thickness of the plug-in card and the un-expanded wedgelock. The card edge is placed in the channel and placed against one of the channel walls. A wedgelock is then placed between the card and the other channel wall. The wedgelock is then expanded by using either a screw or a lever. As the wedgelock expands it fills in the remaining channel gap and bears against the other face of the plug-in card. The majority of heat generated by the components on the plug-in card is forced to conduct from the card into the wall of the cold block, effectively a single sided, dry conduction heat transfer path. Having started as a student design competition named RevCon Challenge, work was performed to evaluate the use of new field-reversible thermal connectors. The new design proposed by the University of Missouri utilized oil based iron nanoparticles, commonly known as a ferrofluid, as a thermal interface material. By using a liquid type of interface material the channel gap can be reduced to a few micrometers, within machining tolerances, and heat can be dissipated off both sides of the card. The addition of nanoparticles improves the effective thermal conductivity of base fluid. The use of iron nanoparticles allows magnets to be used to hold the fluid in place, so the electronic cards may be easily inserted and removed while keeping the ferrofluid in the cold block channel. The ferrofluid-based design which was investigated has shown lower thermal resistance than the current wedgelock design. These results open the door for further development of electronic cards by using higher heat emitting components without compromising the simplicity of attaching/detaching cards from cooling plates.

Overview of NASA supported Stirling thermodynamic loss research

NASA Technical Reports Server (NTRS)

Tew, Roy C.; Geng, Steven M.

1992-01-01

NASA is funding research to characterize Stirling machine thermodynamic losses. NASA's primary goal is to improve Stirling design codes to support engine development for space and terrestrial power. However, much of the fundamental data is applicable to Stirling cooling and heat pump applications. The research results are reviewed. Much was learned about oscillating flow hydrodynamics, including laminar/turbulent transition, and tabulated data was documented for further analysis. Now, with a better understanding of the oscillating flow field, it is time to begin measuring the effects of oscillating flow and oscillating pressure level on heat transfer in heat exchanger flow passages and in cylinders.

The Lick-Gaertner automatic measuring system

NASA Technical Reports Server (NTRS)

Vasilevskis, S.; Popov, W. A.

1971-01-01

The Lick-Gaertner automatic equipment has been designed mainly for the measurement of stellar proper motions with reference to galaxies, and consists of two main components: the survey machine and the automatic measuring engine. The survey machine is used for initial inspection and selection of objects for subsequent measurement. Two plates, up to 17 x 17 inches each, are surveyed simultaneously by means of projection on a screen. The approximate positions of objects selected are measured by two optical screws: helical lines cut through an aluminum coating on glass cylinders. These approximate coordinates to a precision of the order of 0.03mm are transmitted to a card punch by encoders connected with the cylinders.

An Exploration of Cyberspace Security R&D Investment Strategies for DARPA: "The Day After. . . in Cyberspace II",

DTIC Science & Technology

1996-01-01

Automated Teller Machine networks malfunction in Georgia 2000 May 20 CNN off air for 12 minutes; issues special report 2000 May 20 worm...password combinations, social security and credit card numbers, account information, health status, and innumerable other sensitive information...as follows: TW/AA Issues Recommended Technical Response Possible Implementation Obstacles 1. (re Tactical Warning) • Place automated software

FMS: A Format Manipulation System for Automatic Production of Natural Language Documents, Second Edition. Final Report.

ERIC Educational Resources Information Center

Silver, Steven S.

FMS/3 is a system for producing hard copy documentation at high speed from free format text and command input. The system was originally written in assembler language for a 12K IBM 360 model 20 using a high speed 1403 printer with the UCS-TN chain option (upper and lower case). Input was from an IBM 2560 Multi-function Card Machine. The model 20…

The X-ray system of crystallographic programs for any computer having a PIDGIN FORTRAN compiler

NASA Technical Reports Server (NTRS)

Stewart, J. M.; Kruger, G. J.; Ammon, H. L.; Dickinson, C.; Hall, S. R.

1972-01-01

A manual is presented for the use of a library of crystallographic programs. This library, called the X-ray system, is designed to carry out the calculations required to solve the structure of crystals by diffraction techniques. It has been implemented at the University of Maryland on the Univac 1108. It has, however, been developed and run on a variety of machines under various operating systems. It is considered to be an essentially machine independent library of applications programs. The report includes definition of crystallographic computing terms, program descriptions, with some text to show their application to specific crystal problems, detailed card input descriptions, mass storage file structure and some example run streams.

TU-AB-BRC-09: Fast Dose-Averaged LET and Biological Dose Calculations for Proton Therapy Using Graphics Cards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wan, H; Tseung, Chan; Beltran, C

Purpose: To demonstrate fast and accurate Monte Carlo (MC) calculations of proton dose-averaged linear energy transfer (LETd) and biological dose (BD) on a Graphics Processing Unit (GPU) card. Methods: A previously validated GPU-based MC simulation of proton transport was used to rapidly generate LETd distributions for proton treatment plans. Since this MC handles proton-nuclei interactions on an event-by-event using a Bertini intranuclear cascade-evaporation model, secondary protons were taken into account. The smaller contributions of secondary neutrons and recoil nuclei were ignored. Recent work has shown that LETd values are sensitive to the scoring method. The GPU-based LETd calculations were verifiedmore » by comparing with a TOPAS custom scorer that uses tabulated stopping powers, following recommendations by other authors. Comparisons were made for prostate and head-and-neck patients. A python script is used to convert the MC-generated LETd distributions to BD using a variety of published linear quadratic models, and to export the BD in DICOM format for subsequent evaluation. Results: Very good agreement is obtained between TOPAS and our GPU MC. Given a complex head-and-neck plan with 1 mm voxel spacing, the physical dose, LETd and BD calculations for 10{sup 8} proton histories can be completed in ∼5 minutes using a NVIDIA Titan X card. The rapid turnover means that MC feedback can be obtained on dosimetric plan accuracy as well as BD hotspot locations, particularly in regards to their proximity to critical structures. In our institution the GPU MC-generated dose, LETd and BD maps are used to assess plan quality for all patients undergoing treatment. Conclusion: Fast and accurate MC-based LETd calculations can be performed on the GPU. The resulting BD maps provide valuable feedback during treatment plan review. Partially funded by Varian Medical Systems.« less

Creation of an Open Framework for Point-of-Care Computer-Assisted Reporting and Decision Support Tools for Radiologists.

PubMed

Alkasab, Tarik K; Bizzo, Bernardo C; Berland, Lincoln L; Nair, Sujith; Pandharipande, Pari V; Harvey, H Benjamin

2017-09-01

Decreasing unnecessary variation in radiology reporting and producing guideline-concordant reports is fundamental to radiology's success in value-based payment models and good for patient care. In this article, we present an open authoring system for point-of-care clinical decision support tools integrated into the radiologist reporting environment referred to as the computer-assisted reporting and decision support (CAR/DS) framework. The CAR/DS authoring system, described herein, includes: (1) a definition format for representing radiology clinical guidelines as structured, machine-readable Extensible Markup Language documents and (2) a user-friendly reference implementation to test the fidelity of the created definition files with the clinical guideline. The proposed definition format and reference implementation will enable content creators to develop CAR/DS tools that voice recognition software (VRS) vendors can use to extend the commercial tools currently in use. In making the definition format and reference implementation software freely available, we hope to empower individual radiologists, expert groups such as the ACR, and VRS vendors to develop a robust ecosystem of CAR/DS tools that can further improve the quality and efficiency of the patient care that our field provides. We hope that this initial effort can serve as the basis for a community-owned open standard for guideline definition that the imaging informatics and VRS vendor communities will embrace and strengthen. To this end, the ACR Assist™ initiative is intended to make the College's clinical content, including the Incidental Findings Committee White Papers, available for decision support tool creation based upon the herein described CAR/DS framework. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Consumers with an intellectual disability and carers: perceptions of interactions with banks.

PubMed

Hayes, Susan C; Martin, Fiona B

2007-03-01

As more people with an intellectual disability reside independently in the community, there is both the need and the opportunity for them to use financial services, including banks and credit unions, and products such as cash machine cards, credit cards and loans. There is a dearth of information about interactions between consumers with intellectual disabilities and their carers, and financial service providers. This study investigated the perceptions of 94 consumers with an intellectual disability and 53 carers regarding interactions with financial service providers. Consumers and carers mentioned a number of problems with banks, and reported a low rate of successful resolution of these difficulties. Carers mentioned more problems than consumers, and more frequently reported intangible problems such as discrimination. The 'digital divide' was evident, with few consumers having access to Internet or telephone banking. People with intellectual disabilities need education programmes about electronic banking, their rights as consumers and their access to problem resolution strategies.

Poster — Thur Eve — 20: CTDI Measurements using a Radiochromic Film-based clinical protocol

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quintero, C.; Bekerat, H.; DeBlois, F.

2014-08-15

The purpose of the study was evaluating accuracy and reproducibility of a radiochromic film-based protocol to measure computer tomography dose index (CTDI) as a part of annual QA on CT scanners and kV-CBCT systems attached to linear accelerators. Energy dependence of Gafchromic XR-QA2 ® film model was tested over imaging beam qualities (50 – 140 kVp). Film pieces were irradiated in air to known values of air-kerma (up to 10 cGy). Calibration curves for each beam quality were created (Film reflectance change Vs. Air-kerma in air). Film responses for same air-kerma values were compared. Film strips were placed into holesmore » of a CTDI phantom and irradiated for several clinical scanning protocols. Film reflectance change was converted into dose to water and used to calculate CTDIvol values. Measured and tabulated CTDIvol values were compared. Average variations of ±5.2% in the mean film reflectance change were observed in the energy range of 80 to 140 keV, and 11.1% between 50 and 140 keV. Measured CTDI values were in average 10% lower than tabulated CTDI values for CT-simulators, and 44% higher for CBCT systems. Results presented a mean variation for the same machine and protocol of 2.6%. Variation of film response is within ±5% resulting in ±15% systematic error in dose estimation if a single calibration curve is used. Relatively large discrepancy between measured and tabulated CTDI values strongly support the trend towards replacing CTDI value with equilibrium dose measurement in the center of cylindrical phantom, as suggested by TG- 111.« less

The Development of the Command and Control Centre for Trial Kondari

DTIC Science & Technology

2010-07-01

the C2 centre inside a blue bubble whose modems have privately assigned IP addresses which are authenticated by Telstra’s radius server. No other sim...cards can communicate on this private network unless authorised by the radius server. The Next IP network is a network bubble within the larger Next...for all machines on the network.  EPLRS Network Manager (ENM) radio – authenticates and manages all the EPLRS radios. The basic plan’s final

Semantic classification of business images

NASA Astrophysics Data System (ADS)

Erol, Berna; Hull, Jonathan J.

2006-01-01

Digital cameras are becoming increasingly common for capturing information in business settings. In this paper, we describe a novel method for classifying images into the following semantic classes: document, whiteboard, business card, slide, and regular images. Our method is based on combining low-level image features, such as text color, layout, and handwriting features with high-level OCR output analysis. Several Support Vector Machine Classifiers are combined for multi-class classification of input images. The system yields 95% accuracy in classification.

NORAD LOOK ANGLES AND PIO SATELLITE PACKAGE

NASA Technical Reports Server (NTRS)

ANONYMOUS

1994-01-01

This program package consists of two programs. First is the NORAD Look Angles Program, which computes satellite look angles (azimuth, elevation, and range) as well as the subsatellite points (latitude, longitude, and height). The second program in this package is the PIO Satellite Program, which computes sighting directions, visibility times, and the maximum elevation angle attained during each pass of an earth-orbiting satellite. Computations take into consideration the observing location and the effect of the earth's shadow on the satellite visibility. Input consists of a magnetic tape prepared by the NORAD Look Angles Program and punched cards containing reference Julian date, right ascension, declination, mean sidereal time at zero hours universal time of the reference date, and daily changes of these quantities. Output consists of a tabulated listing of the satellite's rise and set times, direction, and the maximum elevation angle visible from each observing location. This program has been implemented on the GE 635. The program Assembler code can easily be replaced by FORTRAN statements.

An Analysis of Serial Number Tracking Automatic Identification Technology as Used in Naval Aviation Programs

DTIC Science & Technology

2002-09-01

employed by the supermarket industry in 1973. Other common linear bar code symbologies are Code 39, pioneered by the defense and automotive industries...Teller Machine ( ATM ) cards are one of the prominent uses of this technology, but to a lesser extent, the technology has been used for shop floor...additional power is transmitted to it through the probe, extending its charge. There is a risk of data loss if the CMB is not accessed from time to time

Use of Tabulated Thermochemical Data for Pure Compounds

NASA Technical Reports Server (NTRS)

Jacobson, Nathan S.

1999-01-01

Thermodynamic data for inorganic compounds is found in a variety of tabulations and computer databases. An extensive listing of sources of inorganic thermodynamic data is provided. The three major tabulations are the JANAF tables. Thermodynamic Properties of Individual Substances, and the tabulation by Barin. The notation and choice of standard states is different in each of these tabulations, so combining data from the different tabulations is often a problem. By understanding the choice of standard states, it is possible to develop simple equations for conversion of the data from one form to another.

Deep Unsupervised Learning on a Desktop PC: A Primer for Cognitive Scientists.

PubMed

Testolin, Alberto; Stoianov, Ivilin; De Filippo De Grazia, Michele; Zorzi, Marco

2013-01-01

Deep belief networks hold great promise for the simulation of human cognition because they show how structured and abstract representations may emerge from probabilistic unsupervised learning. These networks build a hierarchy of progressively more complex distributed representations of the sensory data by fitting a hierarchical generative model. However, learning in deep networks typically requires big datasets and it can involve millions of connection weights, which implies that simulations on standard computers are unfeasible. Developing realistic, medium-to-large-scale learning models of cognition would therefore seem to require expertise in programing parallel-computing hardware, and this might explain why the use of this promising approach is still largely confined to the machine learning community. Here we show how simulations of deep unsupervised learning can be easily performed on a desktop PC by exploiting the processors of low cost graphic cards (graphic processor units) without any specific programing effort, thanks to the use of high-level programming routines (available in MATLAB or Python). We also show that even an entry-level graphic card can outperform a small high-performance computing cluster in terms of learning time and with no loss of learning quality. We therefore conclude that graphic card implementations pave the way for a widespread use of deep learning among cognitive scientists for modeling cognition and behavior.

Deep Unsupervised Learning on a Desktop PC: A Primer for Cognitive Scientists

PubMed Central

Testolin, Alberto; Stoianov, Ivilin; De Filippo De Grazia, Michele; Zorzi, Marco

2013-01-01

Deep belief networks hold great promise for the simulation of human cognition because they show how structured and abstract representations may emerge from probabilistic unsupervised learning. These networks build a hierarchy of progressively more complex distributed representations of the sensory data by fitting a hierarchical generative model. However, learning in deep networks typically requires big datasets and it can involve millions of connection weights, which implies that simulations on standard computers are unfeasible. Developing realistic, medium-to-large-scale learning models of cognition would therefore seem to require expertise in programing parallel-computing hardware, and this might explain why the use of this promising approach is still largely confined to the machine learning community. Here we show how simulations of deep unsupervised learning can be easily performed on a desktop PC by exploiting the processors of low cost graphic cards (graphic processor units) without any specific programing effort, thanks to the use of high-level programming routines (available in MATLAB or Python). We also show that even an entry-level graphic card can outperform a small high-performance computing cluster in terms of learning time and with no loss of learning quality. We therefore conclude that graphic card implementations pave the way for a widespread use of deep learning among cognitive scientists for modeling cognition and behavior. PMID:23653617

Alcohol affects video lottery terminal (VLT) gambling behaviors and cognitions differently.

PubMed

Ellery, Michael; Stewart, Sherry H

2014-03-01

People frequently combine alcohol use and gambling. However, our understanding of the effects of alcohol on gambling behavior is limited, both in terms of what the effects are and how they occur. The effects of a moderately intoxicating dose of alcohol (i.e., a blood alcohol concentration of .06 g%) on the video lottery terminal (VLT) gambling behaviors and cognitions of community-recruited nonpathological (n = 30) and probable pathological gamblers (n = 30) were compared. Alcohol increased the rate of double up betting (i.e., choosing to play a bonus game, after a winning video poker hand, which involves trying to pick a higher ranked card than the dealer's card from among 5 face down cards) of probable pathological gamblers, but did not influence their irrational beliefs about VLT play. Alcohol maintained the irrational beliefs about VLT play of nonpathological gamblers, but did not influence their gambling behaviors. Results are consistent with a growing body of research finding that gambling cognitions have an equivocal role in explaining actual gambling behaviors. Potential mechanisms for the observed effects are discussed. Applied implications discussed include: educating regular VLT players about the effects of alcohol on irrational gambling cognitions; reconsidering policies and practices that make alcohol available where machine gambling takes place; and targeting even moderate alcohol use in the treatment of gambling problems.

Assessing Advanced Technology in CENATE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tallent, Nathan R.; Barker, Kevin J.; Gioiosa, Roberto

PNNL's Center for Advanced Technology Evaluation (CENATE) is a new U.S. Department of Energy center whose mission is to assess and facilitate access to emerging computing technology. CENATE is assessing a range of advanced technologies, from evolutionary to disruptive. Technologies of interest include the processor socket (homogeneous and accelerated systems), memories (dynamic, static, memory cubes), motherboards, networks (network interface cards and switches), and input/output and storage devices. CENATE is developing a multi-perspective evaluation process based on integrating advanced system instrumentation, performance measurements, and modeling and simulation. We show evaluations of two emerging network technologies: silicon photonics interconnects and the Datamore » Vortex network. CENATE's evaluation also addresses the question of which machine is best for a given workload under certain constraints. We show a performance-power tradeoff analysis of a well-known machine learning application on two systems.« less

Implementation of electronic locking devices for adolescents at German tobacco vending machines: intended and unintended changes of supply and demand.

PubMed

Schneider, S; Meyer, C; Yamamoto, S; Solle, D

2009-08-01

Starting from 1 January 2007, electronic locking devices based on proof-of-age (via electronic cash cards or a European driving licence) were installed in approximately 500,000 vending machines across Germany to restrict the purchase of cigarettes to those over the age of 16. To examine changes in the number of tobacco vending machines before and after the introduction of these new measures. The total number of commercial tobacco sources in 2 selected districts (70,000 inhabitants) in Cologne were recorded and mapped. This major German city was the ideal setting for this study as investigators were able to use existing sociogeographical data from the area. A complete inventory was compiled in autumn 2005 and 2007. A total of 780 students aged 12 to 15 were also interviewed in the study areas. The main outcome measures were quantities and locations of commercial tobacco sources. Between 2005 and 2007 the total number of tobacco sources decreased from 315 to 277 within the study area. Although the most obvious reduction was detected in the number of outdoor vending machines (-48%), the number of indoor vending machines also decreased by 8%. Adolescents changed from vending machines to other sources for cigarettes, particularly kiosks or friends (+31% points usage rate, p<0.001; +35% points usage rate, p<0.001, respectively). Although the number of tobacco vending machines decreased, this has not had a significant impact on cigarette acquisition by underage smokers as they were able to circumvent this new security measure in several different ways.

Large-Scale Parallel Simulations of Turbulent Combustion using Combined Dimension Reduction and Tabulation of Chemistry

DTIC Science & Technology

2012-05-22

tabulation of the reduced space is performed using the In Situ Adaptive Tabulation ( ISAT ) algorithm. In addition, we use x2f mpi – a Fortran library...for parallel vector-valued function evaluation (used with ISAT in this context) – to efficiently redistribute the chemistry workload among the...Constrained-Equilibrium (RCCE) method, and tabulation of the reduced space is performed using the In Situ Adaptive Tabulation ( ISAT ) algorithm. In addition

Survey of United States Army Reserve (USAR) Troop Program Unit (TPU) soldiers 1989. Tabulation of Questionnaire Responses: Cross-Sectional Sample: Officers and Enlisted Personnel

DTIC Science & Technology

1989-09-30

26 QUESTIONNAIRE INSTRUMENT ri. -I., DATA TABULATION VOLUMES This material provides information for use by readers to interpret...The second longitudinal Tabulation Volume reports the 1988 questionnaire responses of the junior enlisted "stayers" who were used as the sample to...the specific crossing variables used for the cross-sectional and longitudinal Tabulation Volumes. Cross-Sectional Tabulation Volumes. Demographic

Manifest: A computer program for 2-D flow modeling in Stirling machines

NASA Technical Reports Server (NTRS)

Gedeon, David

1989-01-01

A computer program named Manifest is discussed. Manifest is a program one might want to use to model the fluid dynamics in the manifolds commonly found between the heat exchangers and regenerators of Stirling machines; but not just in the manifolds - in the regenerators as well. And in all sorts of other places too, such as: in heaters or coolers, or perhaps even in cylinder spaces. There are probably nonStirling uses for Manifest also. In broad strokes, Manifest will: (1) model oscillating internal compressible laminar fluid flow in a wide range of two-dimensional regions, either filled with porous materials or empty; (2) present a graphics-based user-friendly interface, allowing easy selection and modification of region shape and boundary condition specification; (3) run on a personal computer, or optionally (in the case of its number-crunching module) on a supercomputer; and (4) allow interactive examination of the solution output so the user can view vector plots of flow velocity, contour plots of pressure and temperature at various locations and tabulate energy-related integrals of interest.

Gambling motivations, money-limiting strategies, and precommitment preferences of problem versus non-problem gamblers.

PubMed

Nower, Lia; Blaszczynski, Alex

2010-09-01

Studies attempting to identify the specific 'addictive' features of electronic gaming machines (EGMs) have yielded largely inconclusive results, suggesting that it is the interaction between a gambler's cognitions and the machine, rather than the machine itself, which fuels excessive play. Research has reported that machine players with gambling problems adopt a number of erroneous cognitive perceptions regarding the probability of winning and the nature of randomness. What is unknown, however, is whether motivations for gambling and attitudes toward pre-session monetary limit-setting vary across levels of gambling severity, and whether proposed precommitment strategies would be useful in minimizing excessive gambling expenditures. The current study explored these concepts in a sample of 127 adults, ages 18 to 81, attending one of four gambling venues in Queensland, Australia. The study found that problem gamblers were more likely than other gamblers to play machines to earn income or escape their problems rather than for fun and enjoyment. Similarly, they were less likely to endorse any type of monetary limit-setting prior to play. They were also reticent to adopt the use of a 'smart card' or other strategy to limit access to money during a session, though they indicated they lost track of money while gambling and were rarely aware of whether they were winning or losing during play. Implications for precommitment policies and further research are discussed.

Bacterial contamination of fabric and metal-bead identity card lanyards: a cross-sectional study.

PubMed

Pepper, Thomas; Hicks, Georgina; Glass, Stephen; Philpott-Howard, John

2014-01-01

In healthcare, fabric or metal-bead lanyards are universally used for carrying identity cards. However there is little information on microbial contamination with potential pathogens that may readily re-contaminate disinfected hands. We examined 108 lanyards from hospital staff. Most grew skin flora but 7/108 (6%) had potentially pathogenic bacteria: four grew methicillin-susceptible Staphylococcus aureus, and four grew probable fecal flora: 3 Clostridium perfringens and 1 Clostridium bifermentans (one lanyard grew both S. aureus and C. bifermentans). Unused (control) lanyards had little or no such contamination. The median duration of lanyard wear was 12 months (interquartile range 3-36 months). 17/108 (16%) of the lanyards had reportedly undergone decontamination including wiping with alcohol, chlorhexidine or chlorine dioxide; and washing with soap and water or by washing machine. Metal-bead lanyards had significantly lower median bacterial counts than those from fabric lanyards (1 vs. 4 CFU/cm(2); Mann-Whitney U=300.5; P<0.001). 12/32 (38%) of the metal-bead lanyards grew no bacteria, compared with 2/76 (3%) of fabric lanyards. We recommend that an effective decontamination regimen be instituted by those who use fabric lanyards, or that fabric lanyards be discarded altogether in preference for metal-bead lanyards or clip-on identity cards. Copyright © 2014 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

Portable electrocardiogram device using Android smartphone.

PubMed

Brucal, S G E; Clamor, G K D; Pasiliao, L A O; Soriano, J P F; Varilla, L P M

2016-08-01

Portable electrocardiogram (ECG) capturing device can be interfaced to a smart phone installed with an android-based application (app). This app processes and analyses the data sent by the device to provide an interpretation of the patient/user's heart current condition (e.g.: beats per minute, heart signal waveform, R-R interval). The ECG recorded by the app is stored in the smart phone's Secure Digital (SD) card and cloud storage which can be accessed remotely by a physician to aid in providing medical diagnosis. The project aims to help patients living at a far distance from hospitals and experience difficulty in consulting their physician for regular check-ups, and assist doctors in regularly monitoring their patient's heart condition. The hardware data acquisition device and software application were subjected to trials in a clinic with volunteer-patients to measure the ECG and heart rate, data saving speed on the SD card, success rate of the saved data and uploaded file. Different ECG tests using the project prototype were done for 12 patients/users and yielded a reading difference of 7.61% in an R-R interval reading and 5.35% in heart rate reading as compared with the cardiologist's conventional 12-electrode ECG machine. Using the developed ECG device, it took less than 5 seconds to save ECG reading using SD card and approximately 2 minutes to upload via cloud.

Efficient Implementation of MrBayes on Multi-GPU

PubMed Central

Zhou, Jianfu; Liu, Xiaoguang; Wang, Gang

2013-01-01

MrBayes, using Metropolis-coupled Markov chain Monte Carlo (MCMCMC or (MC)3), is a popular program for Bayesian inference. As a leading method of using DNA data to infer phylogeny, the (MC)3 Bayesian algorithm and its improved and parallel versions are now not fast enough for biologists to analyze massive real-world DNA data. Recently, graphics processor unit (GPU) has shown its power as a coprocessor (or rather, an accelerator) in many fields. This article describes an efficient implementation a(MC)3 (aMCMCMC) for MrBayes (MC)3 on compute unified device architecture. By dynamically adjusting the task granularity to adapt to input data size and hardware configuration, it makes full use of GPU cores with different data sets. An adaptive method is also developed to split and combine DNA sequences to make full use of a large number of GPU cards. Furthermore, a new “node-by-node” task scheduling strategy is developed to improve concurrency, and several optimizing methods are used to reduce extra overhead. Experimental results show that a(MC)3 achieves up to 63× speedup over serial MrBayes on a single machine with one GPU card, and up to 170× speedup with four GPU cards, and up to 478× speedup with a 32-node GPU cluster. a(MC)3 is dramatically faster than all the previous (MC)3 algorithms and scales well to large GPU clusters. PMID:23493260

Efficient implementation of MrBayes on multi-GPU.

PubMed

Bao, Jie; Xia, Hongju; Zhou, Jianfu; Liu, Xiaoguang; Wang, Gang

2013-06-01

MrBayes, using Metropolis-coupled Markov chain Monte Carlo (MCMCMC or (MC)(3)), is a popular program for Bayesian inference. As a leading method of using DNA data to infer phylogeny, the (MC)(3) Bayesian algorithm and its improved and parallel versions are now not fast enough for biologists to analyze massive real-world DNA data. Recently, graphics processor unit (GPU) has shown its power as a coprocessor (or rather, an accelerator) in many fields. This article describes an efficient implementation a(MC)(3) (aMCMCMC) for MrBayes (MC)(3) on compute unified device architecture. By dynamically adjusting the task granularity to adapt to input data size and hardware configuration, it makes full use of GPU cores with different data sets. An adaptive method is also developed to split and combine DNA sequences to make full use of a large number of GPU cards. Furthermore, a new "node-by-node" task scheduling strategy is developed to improve concurrency, and several optimizing methods are used to reduce extra overhead. Experimental results show that a(MC)(3) achieves up to 63× speedup over serial MrBayes on a single machine with one GPU card, and up to 170× speedup with four GPU cards, and up to 478× speedup with a 32-node GPU cluster. a(MC)(3) is dramatically faster than all the previous (MC)(3) algorithms and scales well to large GPU clusters.

A real time status monitor for transistor bank driver power limit resistor in boost injection kicker power supply

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mi, J.; Tan, Y.; Zhang, W.

2011-03-28

For years suffering of Booster Injection Kicker transistor bank driver regulator troubleshooting, a new real time monitor system has been developed. A simple and floating circuit has been designed and tested. This circuit monitor system can monitor the driver regulator power limit resistor status in real time and warn machine operator if the power limit resistor changes values. This paper will mainly introduce the power supply and the new designed monitoring system. This real time resistor monitor circuit shows a useful method to monitor some critical parts in the booster pulse power supply. After two years accelerator operation, it showsmore » that this monitor works well. Previously, we spent a lot of time in booster machine trouble shooting. We will reinstall all 4 PCB into Euro Card Standard Chassis when the power supply system will be updated.« less

15 CFR 101.1 - Report of tabulations of population to states and localities pursuant to 13 U.S.C. 141(c).

Code of Federal Regulations, 2014 CFR

2014-01-01

... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false Report of tabulations of population to... DECENNIAL CENSUS POPULATION INFORMATION § 101.1 Report of tabulations of population to states and localities... the methodology to be used in calculating the tabulations of population reported to States and...

15 CFR 101.1 - Report of tabulations of population to states and localities pursuant to 13 U.S.C. 141(c).

Code of Federal Regulations, 2012 CFR

2012-01-01

... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false Report of tabulations of population to... DECENNIAL CENSUS POPULATION INFORMATION § 101.1 Report of tabulations of population to states and localities... the methodology to be used in calculating the tabulations of population reported to States and...

15 CFR 101.1 - Report of tabulations of population to states and localities pursuant to 13 U.S.C. 141(c).

Code of Federal Regulations, 2013 CFR

2013-01-01

... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false Report of tabulations of population to... DECENNIAL CENSUS POPULATION INFORMATION § 101.1 Report of tabulations of population to states and localities... the methodology to be used in calculating the tabulations of population reported to States and...

Pacific Northwest residential energy survey. Volume 3. Question-by-question results

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1980-07-01

Tabulations are presented of responses to approximately 105 questions. Results are tabulated by 9 geographic regions: the four states of Idaho, Montana, Oregon, and Washington; four climate zones in the region; and a weighted Pacific Northwest total. A description of the tabulated data is given in the Introduction. Tabulated data deal with questions on dwelling characteristics; heating and air-conditioning systems; water heating; appliances; demographic and swelling characteristics; and insulation.

The IERS Special Bureau for Tides

NASA Technical Reports Server (NTRS)

Ray, Richard D.; Chao, B. F.; Desai, S. D.

2002-01-01

The Global Geophysical Fluids Center of the International Earth Rotation Service (IERS) comprises 8 special bureaus, one of which is the Special Bureau for Tides. Its purpose is to facilitate studies related to tidal effects in earth rotation. To that end it collects various relevant datasets and distributes them, primarily through its website at bowie.gsfc.nasa.gov/ggfc/tides. Example datasets include tabulations of tidal variations in angular momentum and in earth rotation as estimated from numerical ocean tide models and from meteorological reanalysis products. The web site also features an interactive tidal prediction "machine" which generates tidal predictions (e.g., of UT1) from lists of harmonic constants. The Special Bureau relies on the tidal and earth-rotation communities to build and enlarge its datasets; further contributions from this community are most welcome.

Pressure data for four analytically defined arrow wings in supersonic flow. [Langley Unitary Plan Wind Tunnel tests

NASA Technical Reports Server (NTRS)

Townsend, J. C.

1980-01-01

In order to provide experimental data for comparison with newly developed finite difference methods for computing supersonic flows over aircraft configurations, wind tunnel tests were conducted on four arrow wing models. The models were machined under numeric control to precisely duplicate analytically defined shapes. They were heavily instrumented with pressure orifices at several cross sections ahead of and in the region where there is a gap between the body and the wing trailing edge. The test Mach numbers were 2.36, 2.96, and 4.63. Tabulated pressure data for the complete test series are presented along with selected oil flow photographs. Comparisons of some preliminary numerical results at zero angle of attack show good to excellent agreement with the experimental pressure distributions.

Hacker tracking Security system for HMI

NASA Astrophysics Data System (ADS)

Chauhan, Rajeev Kumar

2011-12-01

Conventional Supervisory control and data Acquisition (SCADA) systems use PC, notebook, thin client, and PDA as a Client. Nowadays the Process Industries are following multi shift system that's why multi- client of different category have to work at a single human Machine Interface (HMI). They may hack the HMI Display and change setting of the other client. This paper introduces a Hacker tracking security (HTS) System for HMI. This is developed by using the conventional and Biometric authentication. HTS system is developed by using Numeric passwords, Smart card, biometric, blood flow and Finger temperature. This work is also able to identify the hackers.

Conversion of LARSYS III.1 to an IBM 370 computer

NASA Technical Reports Server (NTRS)

Williams, G. N.; Leggett, J.; Hascall, G. A.

1975-01-01

A software system for processing multispectral aircraft or satellite data (LARSYS) was designed and written at the Laboratory for Applications of Remote Sensing at Purdue University. This system, being implemented on an IBM 360/67 computer utilizing the Cambridge Monitor System, is of an interactive nature. TAMU LARSYS maintains the essential capabilities of Purdue's LARSYS. The machine configuration for which it has been converted is an IBM-compatible Amdahl 470V/6 computer utilizing the time sharing option of the currently implemented OS/VS2 Operating System. Due to TSO limitations, the NASA-JSC deliverable TAMU LARSYS is comprised of two parts. Part one is a TSO Control Card Checker for LARSYS control cards, and part two is a batch version of LARSYS. Used together, they afford most of the capabilities of the original LARSYS III.1. Additionally, two programs have been written by TAMU to support LARSYS processing. The first is an ERTS-to-MIST conversion program used to convert ERTS data to the LARSYS input form, the MIST tape. The second is a system runtable code which maintains tape/file location information for the MIST data sets.

Three-dimensional anthropometric techniques applied to the fabrication of burn masks and the quantification of wound healing

NASA Astrophysics Data System (ADS)

Whitestone, Jennifer J.; Geisen, Glen R.; McQuiston, Barbara K.

1997-03-01

Anthropometric surveys conducted by the military provide comprehensive human body measurement data that are human interface requirements for successful mission performance of weapon systems, including cockpits, protective equipment, and clothing. The application of human body dimensions to model humans and human-machine performance begins with engineering anthropometry. There are two critical elements to engineering anthropometry: data acquisition and data analysis. First, the human body is captured dimensionally with either traditional anthropometric tools, such as calipers and tape measures, or with advanced image acquisition systems, such as a laser scanner. Next, numerous statistical analysis tools, such as multivariate modeling and feature envelopes, are used to effectively transition these data for design and evaluation of equipment and work environments. Recently, Air Force technology transfer allowed researchers at the Computerized Anthropometric Research and Design (CARD) Laboratory at Wright-Patterson Air Force Base to work with the Dayton, Ohio area medical community in assessing the rate of wound healing and improving the fit of total contract burn masks. This paper describes the successful application of CARD Lab engineering anthropometry to two medically oriented human interface problems.

What happens after the implementation of electronic locking devices for adolescents at cigarette vending machines? A natural longitudinal experiment from 2005 to 2009 in Germany.

PubMed

Schneider, Sven; Gruber, Johannes; Yamamoto, Shelby; Weidmann, Christian

2011-08-01

As of January 01, 2007, electronic locking devices based on proof of age (electronic cash cards or European driving licenses) were installed on 500,000 cigarette vending machines across Germany to restrict the purchase of cigarettes to those over the age of 16 years. In 2009, the age limit was raised to 18 years. The aim of this study was to compare the number of cigarette vending machines and other commercial sources before and after the enactment of the new law and to examine the association between commercial cigarette sources and area socioeconomic status (SES). We recorded and mapped using Geographical Information System software the total number of commercial cigarette sources in 4 selected districts in the major German city of Cologne. The city was the ideal setting for this study as we were able to use existing sociogeographical data from this area. We compiled a complete inventory of commercial cigarette sources in autumn 2005 and 2009. An interim inventory was also completed in 2007. Between 2005 and 2009, the total number of cigarette sources decreased from 369 to 325 within the study area. Although the most obvious reduction was detected in the number of outdoor vending machines (-44%), the number of indoor vending machines also decreased by 5%. In 2005 as well as in 2009, we found significantly fewer commercial cigarette sources in districts with above-average SES than in districts with below-average SES. Although the number of overall cigarette vending machines decreased, the disparity in distribution of cigarette sources between socially advantaged and disadvantaged areas increased.

Survey of United States Army Reserve (USAR) Troop Program Unit (TPU) soldiers 1989. Tabulation of Questionnaire Responses: Cross-Sectional Sample: Junior Enlisted (E1-E4)

DTIC Science & Technology

1989-09-30

information for use by readers to interpret the tabulation volumes accompanying the final project report: 1989 Survey of U.S. Army Reserve (USAR) Troop...34stayers" who were used as the sample to generate the first longitudinal Tabulation Volume. Comparing questionnaire response frequencies between the...as described below). Detailed below are the specific crossing variables used for the cross-sectional and longitudinal Tabulation Volumes. Cross

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meneses, Esteban; Ni, Xiang; Jones, Terry R

The unprecedented computational power of cur- rent supercomputers now makes possible the exploration of complex problems in many scientific fields, from genomic analysis to computational fluid dynamics. Modern machines are powerful because they are massive: they assemble millions of cores and a huge quantity of disks, cards, routers, and other components. But it is precisely the size of these machines that glooms the future of supercomputing. A system that comprises many components has a high chance to fail, and fail often. In order to make the next generation of supercomputers usable, it is imperative to use some type of faultmore » tolerance platform to run applications on large machines. Most fault tolerance strategies can be optimized for the peculiarities of each system and boost efficacy by keeping the system productive. In this paper, we aim to understand how failure characterization can improve resilience in several layers of the software stack: applications, runtime systems, and job schedulers. We examine the Titan supercomputer, one of the fastest systems in the world. We analyze a full year of Titan in production and distill the failure patterns of the machine. By looking into Titan s log files and using the criteria of experts, we provide a detailed description of the types of failures. In addition, we inspect the job submission files and describe how the system is used. Using those two sources, we cross correlate failures in the machine to executing jobs and provide a picture of how failures affect the user experience. We believe such characterization is fundamental in developing appropriate fault tolerance solutions for Cray systems similar to Titan.« less

TABLET: The personal computer of the year 2000

NASA Technical Reports Server (NTRS)

Mel, Bartlett W.; Omohundro, Stephen M.; Robison, Arch D.; Skiena, Steven S.; Thearling, Kurt H.; Young, Luke T.; Wolfram, Stephen

1988-01-01

The University of Illinois design of the TABLET portable computer extends the freedom of pen and notepad with a machine that draws on the projected power of 21st century technology. Without assuming any new, major technological breakthroughs, it seeks to balance the promises of today's growing technologies with the changing role of computers in tomorrow's education, research, security, and commerce. It seeks to gather together in one basket the matured fruits of such buzzword technologies as LCD, GPS, CCD, WSI, and DSP. The design is simple, yet sleek. Roughly the size and weight of a notebook, the machine is a dark, featureless monolith with no moving parts. Through magneto-optics, a simple LaserCard provides exchangeable, mass data storage. Its I/O surface, in concert with built-in infrared and cellular transceivers, puts the user in touch with anyone and anything. The ensemble of these components, directed by software that can transform it into anything from a keyboard or notepad to an office or video studio, suggests an instrument of tremendous power and freedom.

23 CFR 635.113 - Bid opening and bid tabulations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... permitted. (b) The STD shall prepare and forward tabulations of bids to the Division Administrator. These tabulations shall be certified by a responsible STD official and shall show: (1) Bid item details for at least... opened and reviewed in accordance with the terms of the solicitation. The STD must use its own procedures...

23 CFR 635.113 - Bid opening and bid tabulations.

Code of Federal Regulations, 2014 CFR

2014-04-01

... permitted. (b) The STD shall prepare and forward tabulations of bids to the Division Administrator. These tabulations shall be certified by a responsible STD official and shall show: (1) Bid item details for at least... opened and reviewed in accordance with the terms of the solicitation. The STD must use its own procedures...

23 CFR 635.113 - Bid opening and bid tabulations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... permitted. (b) The STD shall prepare and forward tabulations of bids to the Division Administrator. These tabulations shall be certified by a responsible STD official and shall show: (1) Bid item details for at least... opened and reviewed in accordance with the terms of the solicitation. The STD must use its own procedures...

23 CFR 635.113 - Bid opening and bid tabulations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... permitted. (b) The STD shall prepare and forward tabulations of bids to the Division Administrator. These tabulations shall be certified by a responsible STD official and shall show: (1) Bid item details for at least... opened and reviewed in accordance with the terms of the solicitation. The STD must use its own procedures...

Tabulations of ambient ozone data obtained by GASP (Global Air Sampling Program) airliners, March 1975 to July 1979

NASA Technical Reports Server (NTRS)

Jasperson, W. H.; Holdeman, J. D.

1984-01-01

Tabulations are given of GASP ambient ozone mean, standard deviation, median, 84th percentile, and 98th percentile values, by month, flight level, and geographical region. These data are tabulated to conform to the temporal and spatial resolution required by FAA Advisory Circular 120-38 (monthly by 2000 ft in altitude by 5 deg in latitude) for climatological data used to show compliance with cabin ozone regulations. In addition seasonal x 10 deg latitude tabulations are included which are directly comparable to and supersede the interim GASP ambient ozone tabulations given in appendix B of FAA-EE-80-43 (NASA TM-81528). Selected probability variations are highlighted to illustrate the spatial and temporal variability of ambient ozone and to compare results from the coarse and fine grid analyses.

Experimental validation of beam quality correction factors for proton beams

NASA Astrophysics Data System (ADS)

Gomà, Carles; Hofstetter-Boillat, Bénédicte; Safai, Sairos; Vörös, Sándor

2015-04-01

This paper presents a method to experimentally validate the beam quality correction factors (kQ) tabulated in IAEA TRS-398 for proton beams and to determine the kQ of non-tabulated ionization chambers (based on the already tabulated values). The method is based exclusively on ionometry and it consists in comparing the reading of two ionization chambers under the same reference conditions in a proton beam quality Q and a reference beam quality 60Co. This allows one to experimentally determine the ratio between the kQ of the two ionization chambers. In this work, 7 different ionization chamber models were irradiated under the IAEA TRS-398 reference conditions for 60Co beams and proton beams. For the latter, the reference conditions for both modulated beams (spread-out Bragg peak field) and monoenergetic beams (pseudo-monoenergetic field) were studied. For monoenergetic beams, it was found that the experimental kQ values obtained for plane-parallel chambers are consistent with the values tabulated in IAEA TRS-398; whereas the kQ values obtained for cylindrical chambers are not consistent—being higher than the tabulated values. These results support the suggestion (of previous publications) that the IAEA TRS-398 reference conditions for monoenergetic proton beams should be revised so that the effective point of measurement of cylindrical ionization chambers is taken into account when positioning the reference point of the chamber at the reference depth. For modulated proton beams, the tabulated kQ values of all the ionization chambers studied in this work were found to be consistent with each other—except for the IBA FC65-G, whose experimental kQ value was found to be 0.6% lower than the tabulated one. The kQ of the PTW Advanced Markus chamber, which is not tabulated in IAEA TRS-398, was found to be 0.997 ± 0.042 (k = 2), based on the tabulated value of the PTW Markus chamber.

Evaluation of different flamelet tabulation methods for laminar spray combustion

NASA Astrophysics Data System (ADS)

Luo, Yujuan; Wen, Xu; Wang, Haiou; Luo, Kun; Fan, Jianren

2018-05-01

In this work, three different flamelet tabulation methods for spray combustion are evaluated. Major differences among these methods lie in the treatment of the temperature boundary conditions of the flamelet equations. Particularly, in the first tabulation method ("M1"), both the fuel and oxidizer temperature boundary conditions are set to be fixed. In the second tabulation method ("M2"), the fuel temperature boundary condition is varied while the oxidizer temperature boundary condition is fixed. In the third tabulation method ("M3"), both the fuel and oxidizer temperature boundary conditions are varied and set to be equal. The focus of this work is to investigate whether the heat transfer between the droplet phase and gas phase can be represented by the studied tabulation methods through a priori analyses. To this end, spray flames stabilized in a three-dimensional counterflow are first simulated with detailed chemistry. Then, the trajectory variables are calculated from the detailed chemistry solutions. Finally, the tabulated thermo-chemical quantities are compared to the corresponding values from the detailed chemistry solutions. The comparisons show that the gas temperature cannot be predicted by "M1" with only a mixture fraction and reaction progress variable being the trajectory variables. The gas temperature can be correctly predicted by both "M2" and "M3," in which the total enthalpy is introduced as an additional manifold. In "M2," variations of the oxidizer temperature are considered with a temperature modification technique, which is not required in "M3." Interestingly, it is found that the mass fractions of the reactants and major products are not sensitive to the representation of the interphase heat transfer in the flamelet chemtables, and they can be correctly predicted by all tabulation methods. By contrast, the intermediate species CO and H2 in the premixed flame reaction zone are over-predicted by all tabulation methods.

Computer Information Project for Monographs at the Medical Research Library of Brooklyn

PubMed Central

Koch, Michael S.; Kovacs, Helen

1973-01-01

The article describes a resource library's computer-based project that provides cataloging and other bibliographic services and promotes greater use of the book collection. A few studies are cited to show the significance of monographic literature in medical libraries. The educational role of the Medical Research Library of Brooklyn is discussed, both with regard to the parent institution and to smaller medical libraries in the same geographic area. Types of aid given to smaller libraries are enumerated. Information is given on methods for providing machine-produced catalog cards, current awareness notes, and bibliographic lists. Actualities and potentialities of the computer project are discussed. PMID:4579767

Design of an automatic production monitoring system on job shop manufacturing

NASA Astrophysics Data System (ADS)

Prasetyo, Hoedi; Sugiarto, Yohanes; Rosyidi, Cucuk Nur

2018-02-01

Every production process requires monitoring system, so the desired efficiency and productivity can be monitored at any time. This system is also needed in the job shop type of manufacturing which is mainly influenced by the manufacturing lead time. Processing time is one of the factors that affect the manufacturing lead time. In a conventional company, the recording of processing time is done manually by the operator on a sheet of paper. This method is prone to errors. This paper aims to overcome this problem by creating a system which is able to record and monitor the processing time automatically. The solution is realized by utilizing electric current sensor, barcode, RFID, wireless network and windows-based application. An automatic monitoring device is attached to the production machine. It is equipped with a touch screen-LCD so that the operator can use it easily. Operator identity is recorded through RFID which is embedded in his ID card. The workpiece data are collected from the database by scanning the barcode listed on its monitoring sheet. A sensor is mounted on the machine to measure the actual machining time. The system's outputs are actual processing time and machine's capacity information. This system is connected wirelessly to a workshop planning application belongs to the firm. Test results indicated that all functions of the system can run properly. This system successfully enables supervisors, PPIC or higher level management staffs to monitor the processing time quickly with a better accuracy.

Socioeconomic characterization of regions through the lens of individual financial transactions.

PubMed

Hashemian, Behrooz; Massaro, Emanuele; Bojic, Iva; Murillo Arias, Juan; Sobolevsky, Stanislav; Ratti, Carlo

2017-01-01

People are increasingly leaving digital traces of their daily activities through interacting with their digital environment. Among these traces, financial transactions are of paramount interest since they provide a panoramic view of human life through the lens of purchases, from food and clothes to sport and travel. Although many analyses have been done to study the individual preferences based on credit card transaction, characterizing human behavior at larger scales remains largely unexplored. This is mainly due to the lack of models that can relate individual transactions to macro-socioeconomic indicators. Building these models, not only can we obtain a nearly real-time information about socioeconomic characteristics of regions, usually available yearly or quarterly through official statistics, but also it can reveal hidden social and economic structures that cannot be captured by official indicators. In this paper, we aim to elucidate how macro-socioeconomic patterns could be understood based on individual financial decisions. To this end, we reveal the underlying interconnection of the network of spending leveraging anonymized individual credit/debit card transactions data, craft micro-socioeconomic indices that consists of various social and economic aspects of human life, and propose a machine learning framework to predict macro-socioeconomic indicators.

Socioeconomic characterization of regions through the lens of individual financial transactions

PubMed Central

Bojic, Iva; Murillo Arias, Juan; Sobolevsky, Stanislav; Ratti, Carlo

2017-01-01

People are increasingly leaving digital traces of their daily activities through interacting with their digital environment. Among these traces, financial transactions are of paramount interest since they provide a panoramic view of human life through the lens of purchases, from food and clothes to sport and travel. Although many analyses have been done to study the individual preferences based on credit card transaction, characterizing human behavior at larger scales remains largely unexplored. This is mainly due to the lack of models that can relate individual transactions to macro-socioeconomic indicators. Building these models, not only can we obtain a nearly real-time information about socioeconomic characteristics of regions, usually available yearly or quarterly through official statistics, but also it can reveal hidden social and economic structures that cannot be captured by official indicators. In this paper, we aim to elucidate how macro-socioeconomic patterns could be understood based on individual financial decisions. To this end, we reveal the underlying interconnection of the network of spending leveraging anonymized individual credit/debit card transactions data, craft micro-socioeconomic indices that consists of various social and economic aspects of human life, and propose a machine learning framework to predict macro-socioeconomic indicators. PMID:29190724

Differential Power Analysis as a digital forensic tool.

PubMed

Souvignet, T; Frinken, J

2013-07-10

Electronic payment fraud is considered a serious international crime by Europol. An important part of this fraud comes from payment card data skimming. This type of fraud consists of an illegal acquisition of payment card details when a user is withdrawing cash at an automated teller machine (ATM) or paying at a point of sale (POS). Modern skimming devices, also known as skimmers, use secure crypto-algorithms (e.g. Advanced Encryption Standard (AES)) to protect skimmed data stored within their memory. In order to provide digital evidence in criminal cases involving skimmers, law enforcement agencies (LEAs) must retrieve the plaintext skimmed data, generally without having knowledge of the secret key. This article proposes an alternative to the current solution at the Bundeskriminalamt (BKA) to reveal the secret key. The proposed solution is non-invasive, based on Power Analysis Attack (PAA). This article first describes the structure and the behaviour of an AES skimmer, followed by the proposal of the full operational PAA process, from power measurements to attack computation. Finally, it presents results obtained in several cases, explaining the latest improvements and providing some ideas for further developments. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

No vote--no census: an account of some of the events of 1910-1911.

PubMed

White, Ian

2010-01-01

The 2011 Census on the 27 March will be the latest in a series spanning over two centuries and covering vast demographic changes in the British population. Although the underlying aim of each census since 1801 has been to obtain an accurate enumeration of the population, successive censuses have adapted to changing social and technological circumstances, asking appropriate questions and using the best available technology to compile results. A century ago, the 1911 Census represented a shift from earlier censuses in its use of machine tabulation. Despite this innovation, however, what is perhaps most interesting about 1911 is the social and political circumstances: the 1911 Census took place against the background of a threatened boycott by the suffragette movement. The article demonstrates how, though times change and technology moves on, a successful census was conducted despite the deeply sensitive political times.

Point and Condensed Hα Sources in the Interior of M33

NASA Astrophysics Data System (ADS)

Moody, J. Ward; Hintz, Eric G.; Roming, Peter; Joner, Michael D.; Bucklein, Brian

2017-01-01

A variety of interesting objects such as Wolf-Rayet stars, tight OB associations, planetary nebula, x-ray binaries, etc. can be discovered as point or condensed sources in Hα surveys. How these objects distribute through a galaxy sheds light on the galaxy star formation rate and history, mass distribution, and dynamics. The nearby galaxy M33 is an excellent place to study the distribution of Hα-bright point sources in a flocculant spiral galaxy. We have reprocessed an archived WIYN continuum-subtracted Hα image of the inner 6.5' of the nearby galaxy M33 and, employing both eye and machine searches, have tabulated sources with a flux greater than 1 x 10-15 erg cm-2sec-1. We have identified 152 unresolved point sources and 122 marginally resolved condensed sources, 38 of which have not been previously cataloged. We present a map of these sources and discuss their probable identifications.

[A study of infant mortality rate in Korean rural areas].

PubMed

Cho, Y H

1981-10-31

This study was undertaken in an attempt to identify the level of birth and infant death in the KHDI demonstration areas. The objectives of this study were to collect available information on birth and infant death in the KHDI demonstration areas, and estimate actual levels of birth and infant mortality in these areas. Within these areas, events of birth and death are continuously recorded by the field health workers, such as the Family Folder, maternal health service card, and the infant-child health service card. Study areas included all the KHDI demonstration areas (Hongchon, Okgu, Gunee). However, 2 myons in the Okgu area were excluded from the study areas since there was no community health practitioner assigned there. The data were collected by 24 community health practitioners and 80 community health aides in the 3 demonstration areas, according to the survey format. These health workers examined and searched existing records. After filling out the survey questionnaires, these health workers made contact with village health workers, "Li" chiefs, mother's club chiefs, or Saemaul leaders at the village level in order that they might gather additional information on possible items which were omitted. Afterwards, health workers made home visits to selected households which were known to have had births or deaths during the 1 year period between January-December 1979. A review of the activities of the health workers during this study indicated that professional survey workers were needed. In addition, 8 surveyors were employed and trained by KHDI to strengthen field survey efforts; they were dispatched to Hongchon and Okgu for 17 days. A total number of 3302 live births and 120 infant deaths were recorded during 1979. All data collected were tabulated by manual counting in the KHDI office. Infant mortality was estimated to be 36.34/1000 births in the demonstration areas during 1979 (rate in Hongchon Gun was 34.5, 31.0 in Okgu Gun, and 46.2 in Gunee Gun). (author's)

Survey of United States Army Reserve (USAR) Troop Program Unit (TPU) soldiers - 1989

DTIC Science & Technology

1989-09-30

TABULATION VOLUMES This material provides information for use by readers to interpret the tabulation volumes accompanying the final project report...questionnaire responses of the junior enlisted "stayers" who were used as the sample to generate the first longitudinal Tabulation Volume. Comparing...crossed by Iselected demographic variables (as described below). Detailed below are the specific crossing variables used for the cross-sectional and

Specifications and implementation of the RT MHD control system for the EC launcher of FTU

NASA Astrophysics Data System (ADS)

Galperti, C.; Alessi, E.; Boncagni, L.; Bruschi, A.; Granucci, G.; Grosso, A.; Iannone, F.; Marchetto, C.; Nowak, S.; Panella, M.; Sozzi, C.; Tilia, B.

2012-09-01

To perform real time plasma control experiments using EC heating waves by using the new fast launcher installed on FTU a dedicated data acquisition and elaboration system has been designed recently. A prototypical version of the acquisition/control system has been recently developed and will be tested on FTU machine in its next experimental campaign. The open-source framework MARTe (Multi-threaded Application Real-Time executor) on Linux/RTAI real-time operating system has been chosen as software platform to realize the control system. Standard open-architecture industrial PCs, based either on VME bus and CompactPCI bus equipped with standard input/output cards are the chosen hardware platform.

What makes gambling cool? Images of agency and self-control in fiction films.

PubMed

Egerer, Michael; Rantala, Varpu

2015-03-01

The study is a qualitative film analysis. It seeks to determine the semiotic and cinematic structures that make gambling appealing in films based on analysis of 72 film scenes from 28 narrative fiction films made from 1922 to 2003 about gambling in North American and West European mainstream cinema. The main game types include card games, casino games, and slot machines. The theme of self-control and competence was identified as being central to gambling's appeal. These images are strongly defined by gender. The study was funded by ELOMEDIA, financed by the Finnish Ministry of Education and Culture as well as the Finnish Foundation for Alcohol Studies. The limitations of the study are noted.

26 CFR 301.6311-2 - Payment by credit card and debit card.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 18 2012-04-01 2012-04-01 false Payment by credit card and debit card. 301.6311....6311-2 Payment by credit card and debit card. (a) Authority to receive—(1) Payments by credit card and debit card. Internal revenue taxes may be paid by credit card or debit card as authorized by this...

26 CFR 301.6311-2 - Payment by credit card and debit card.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 18 2011-04-01 2011-04-01 false Payment by credit card and debit card. 301.6311....6311-2 Payment by credit card and debit card. (a) Authority to receive—(1) Payments by credit card and debit card. Internal revenue taxes may be paid by credit card or debit card as authorized by this...

26 CFR 301.6311-2 - Payment by credit card and debit card.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 18 2013-04-01 2013-04-01 false Payment by credit card and debit card. 301.6311....6311-2 Payment by credit card and debit card. (a) Authority to receive—(1) Payments by credit card and debit card. Internal revenue taxes may be paid by credit card or debit card as authorized by this...

26 CFR 301.6311-2 - Payment by credit card and debit card.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 18 2014-04-01 2014-04-01 false Payment by credit card and debit card. 301.6311....6311-2 Payment by credit card and debit card. (a) Authority to receive—(1) Payments by credit card and debit card. Internal revenue taxes may be paid by credit card or debit card as authorized by this...

Playing the Smart Card.

ERIC Educational Resources Information Center

Zuzack, Christine A.

1997-01-01

Enhanced magnetic strip cards and "smart cards" offer varied service options to college students. Enhanced magnetic strip cards serve as cash cards and provide access to services. Smart cards, which resemble credit cards but contain a microchip, can be used as phone cards, bus passes, library cards, admission tickets, point-of-sale debit…

A tabulation of pipe length to diameter ratios as a function of Mach number and pressure ratios for compressible flow

NASA Technical Reports Server (NTRS)

Dixon, G. V.; Barringer, S. R.; Gray, C. E.; Leatherman, A. D.

1975-01-01

Computer programs and resulting tabulations are presented of pipeline length-to-diameter ratios as a function of Mach number and pressure ratios for compressible flow. The tabulations are applicable to air, nitrogen, oxygen, and hydrogen for compressible isothermal flow with friction and compressible adiabatic flow with friction. Also included are equations for the determination of weight flow. The tabulations presented cover a wider range of Mach numbers for choked, adiabatic flow than available from commonly used engineering literature. Additional information presented, but which is not available from this literature, is unchoked, adiabatic flow over a wide range of Mach numbers, and choked and unchoked, isothermal flow for a wide range of Mach numbers.

[Application of patient card technology to health care].

PubMed

Sayag, E; Danon, Y L

1995-03-15

The potential benefits of patient card technology in improving management and delivery of health services have been explored. Patient cards can be used for numerous applications and functions: as a means of identification, as a key for an insurance payment system, and as a communication medium. Advanced card technologies allow for the storage of data on the card, creating the possibility of a comprehensive and portable patient record. There are many types of patient cards: paper or plastic cards, microfilm cards, bar-code cards, magnetic-strip cards and integrated circuit smart-cards. Choosing the right card depends on the amount of information to be stored, the degree of security required and the cost of the cards and their supporting infrastructure. Problems with patient cards are related to storage capacity, backup and data consistency, access authorization and ownership and compatibility. We think it is worth evaluating the place of patient card technology in the delivery of health services in Israel.

ERA 1103 UNIVAC 2 Calculating Machine

NASA Image and Video Library

1955-09-21

The new 10-by 10-Foot Supersonic Wind Tunnel at the Lewis Flight Propulsion Laboratory included high tech data acquisition and analysis systems. The reliable gathering of pressure, speed, temperature, and other data from test runs in the facilities was critical to the research process. Throughout the 1940s and early 1950s female employees, known as computers, recorded all test data and performed initial calculations by hand. The introduction of punch card computers in the late 1940s gradually reduced the number of hands-on calculations. In the mid-1950s new computational machines were installed in the office building of the 10-by 10-Foot tunnel. The new systems included this UNIVAC 1103 vacuum tube computer—the lab’s first centralized computer system. The programming was done on paper tape and fed into the machine. The 10-by 10 computer center also included the Lewis-designed Computer Automated Digital Encoder (CADDE) and Digital Automated Multiple Pressure Recorder (DAMPR) systems which converted test data to binary-coded decimal numbers and recorded test pressures automatically, respectively. The systems primarily served the 10-by 10, but were also applied to the other large facilities. Engineering Research Associates (ERA) developed the initial UNIVAC computer for the Navy in the late 1940s. In 1952 the company designed a commercial version, the UNIVAC 1103. The 1103 was the first computer designed by Seymour Cray and the first commercially successful computer.

The Effects of Tank Crew Turbulence on Tank Gunnery Performance

DTIC Science & Technology

1978-09-01

complete. Crewmen’s responses were converted to mouths for all itqms and tabulated for analysis. Because data was tabulated to two digits a maximum...two- digit data tabulation, mean and standard deviation statistics are somewhat conserva- tive for items 8, 9, and 10. There were 14-1S% of the TCs who...Benjamin Harrison. ATTN Libary I HQOA (DAMA-ARI I USAPACDC. Ft SBenjamuun Haritson, ATTN; ATCP-IHR I HOCIA OAPE HRE PO) IUSA Comrm- Elect Sch

Big Data, Global Development, and Complex Social Systems

NASA Astrophysics Data System (ADS)

Eagle, Nathan

2010-03-01

Petabytes of data about human movements, transactions, and communication patterns are continuously being generated by everyday technologies such as mobile phones and credit cards. This unprecedented volume of information facilitates a novel set of research questions applicable to a wide range of development issues. In collaboration with the mobile phone, internet, and credit card industries, my colleagues and I are aggregating and analyzing behavioral data from over 250 million people from North and South America, Europe, Asia and Africa. I will discuss a selection of projects arising from these collaborations that involve inferring behavioral dynamics on a broad spectrum of scales; from risky behavior in a group of MIT freshman to population-level behavioral signatures, including cholera outbreaks in Rwanda and wealth in the UK. Access to the movement patterns of the majority of mobile phones in East Africa also facilitates realistic models of disease transmission as well as slum formations. This vast volume of data requires new analytical tools - we are developing a range of large-scale network analysis and machine learning algorithms that we hope will provide deeper insight into human behavior. However, ultimately our goal is to determine how we can use these insights to actively improve the lives of the billions of people who generate this data and the societies in which they live.

The research of laser marking control technology

NASA Astrophysics Data System (ADS)

Zhang, Qiue; Zhang, Rong

2009-08-01

In the area of Laser marking, the general control method is insert control card to computer's mother board, it can not support hot swap, it is difficult to assemble or it. Moreover, the one marking system must to equip one computer. In the system marking, the computer can not to do the other things except to transmit marking digital information. Otherwise it can affect marking precision. Based on traditional control methods existed some problems, introduced marking graphic editing and digital processing by the computer finish, high-speed digital signal processor (DSP) control marking the whole process. The laser marking controller is mainly contain DSP2812, digital memorizer, DAC (digital analog converting) transform unit circuit, USB interface control circuit, man-machine interface circuit, and other logic control circuit. Download the marking information which is processed by computer to U disk, DSP read the information by USB interface on time, then processing it, adopt the DSP inter timer control the marking time sequence, output the scanner control signal by D/A parts. Apply the technology can realize marking offline, thereby reduce the product cost, increase the product efficiency. The system have good effect in actual unit markings, the marking speed is more quickly than PCI control card to 20 percent. It has application value in practicality.

[Evaluation of a registration card for logging electrocardiographic records into standard personal computers].

PubMed

Pizzuti, A; Baralis, G; Bassignana, A; Antonielli, E; Di Leo, M

1997-01-01

The MS200 Cardioscope, from MRT Micro as., Norway, is a 12 channel ECG card to be directly inserted into a standard personal computer (PC). The standard ISA Bus compatible half length card comes with a set of 10 cables with electrodes and the software for recording, displaying and saving ECG signals. The system is supplied with DOS or Windows software. The goal of the present work was to evaluate the affordability and usability of the MS200 in a clinical setting. We tested the 1.5 DOS version of the software. In 30 patients with various cardiac diseases the ECG signal has been recorded with MS200 and with standard Hellige CardioSmart equipment. The saved ECGs were recalled and printed using an Epson Stylus 800 ink-jet printer. Two cardiologists reviewed the recordings for a looking at output quality, amplitude and speed precision, artifacts, etc. 1) Installation: the card has proven to be totally compatible with the hardware; no changes in default settings had to be made. 2) Usage: the screens are clear; the commands and menus are intuitive and easy to use. Due to the boot-strap and software loading procedures and, most important, off-line printing, the time needed to obtain a complete ECG printout has been longer than that of the reference machine. 3) Archiving and retrieval of ECG: the ECG curves can be saved in original or compressed form: selecting the latter, the noise and non-ECG information is filtered away and the space consumption on disk is reduced: on average, 20 Kb are needed for 10 seconds of signal. The MS200 can be run on a Local Area Network and is prepared for integrating with an existing informative system: we are currently testing the system in this scenery. 4) MS200 includes options for on-line diagnosis, a technology we have not tested in the present work. 5) The only setting allowed for printing full pages is letter size (A4): the quality of printouts is good, with a resolution of 180 DPI. In conclusion, the MS200 system seems reliable and safe. In the configuration we tested, it cannot substitute a dedicated ECG equipment: from this point of view, a smaller PCMCIA-type card with a battery-operated notebook PC will be more suitable for clinical uses. Nevertheless, the possibility to log and track ECG records, integrated into the department informative system, may provide a valuable tool for improving access to medical information.

[New electronic data carriers in Bosnia-Herzegovina].

PubMed

Masić, I; Pandza, H; Knezević, Z; Toromanović, S

1999-01-01

Bosnia and Herzegovina has been developing new Health Care System based on Electronic Registration Card. Developing countries proceeded from the manual and semiautomatic method of medical data processing to the new method of entering, storage, transfer, searching and protection of data using electronic equipment. Currently, many European countries have developed a Medical Card Based Electronic Information System. Both technologies offer the advantages and disadvantages. Three types of electronic card are currently in use: Hybrid Card, Smart Card and Laser Card. Hybrid Card offers characteristics of both Smart Card and Laser Card. The differences among these cards, such as a capacity, total price, price per byte, security system are discussed here. The dilemma is, which card should be used as a data carrier. The Electronic Family Registration Card is a question of strategic interest for B&H, but also a big investment. We should avoid the errors of other countries that have been developing card-based system. In this article we present all mentioned cards and compare advantages and disadvantages of different technologies.

Mechanization of Cataloging Procedures *

PubMed Central

Kilgour, Frederick G.

1965-01-01

The Columbia-Harvard-Yale Medical Libraries Computerization Project has put into operation its mechanized procedure for the production of catalog cards. Cards produced are in final form ready to be filed into a card catalog. Catalogers prepare copy on a worksheet from which punched cards are punched. An IBM 1401 computer processes the decklets of punched cards on magnetic tape to produce the expanded decklets of punched cards needed to print the various packs of catalog cards required to go into different catalogs. Next, the computer punches the expanded decklets of cards to operate an 870 Document Writer, which types out the catalog cards in final form. Cost of cards ready to file is 12.5 cents per card. Images PMID:14271110

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keller, J; Hardin, M; Giaddui, T

Purpose: To test whether unified vendor specified beam conformance for matched machines implies volumetric modulated arc radiotherapy(VMAT) delivery consistency. Methods: Twenty-two identical patient QA plans, eleven 6MV and eleven 15MV, were delivered to the Delta{sup 4}(Scandidos, Uppsala, Sweden) on two Varian TrueBEAM matched machines. Sixteen patient QA plans, nine 6 MV and seven 10 MV, were delivered to Delta{sup 4} on two Elekta Agility matched machines. The percent dose deviation(%DDev), distance-to-agreement(DTA), and the gamma analysis(γ) were collected for all plans and the differences in measurements were tabulated between matched machines. A paired t-test analysis of the data with an alphamore » of 0.05 determines statistical significance. Power(P) was calculated to detect a difference of 5%; all data except Elekta %DDev sets were strong with above a 0.85 power. Results: The average differences for Varian machines (%DDev, DTA, and γ) are 6.4%, 1.6% and 2.7% for 6MV, respectively, and 8.0%, 0.6%, and 2.5% for 15MV. The average differences for matched Elekta machines (%DDev, DTA, and γ) are 10.2%, 0.6% and 0.9% for 6 MV, respectively, and 7.0%, 1.9%, and 2.8% for 10MV.A paired t-test shows for Varian the %DDev difference is significant for 6MV and 15MV(p-value6MV=0.019, P6MV=0.96; p-value15MV=0.0003, P15MV=0.86). Differences in DTA are insignificant for both 6MV and 15MV(p-value6MV=0.063, P6MV=1; p-value15MV=0.907, P15MV=1). Varian differences in gamma are significant for both energies(p-value6MV=0.025, P6MV=0.99; p-value15MV=0.013, P15MV=1). A paired t-test shows for Elekta the difference in %DDev is significant for 6MV but not 10MV(p-value6MV=0.00065, P6MV=0.68; p-value10MV=0.262, P10MV=0.39). Differences in DTA are statistically insignificant(p-value6MV=0.803, P6MV = 1; p-value10MV=0.269, P10MV=1). Elekta differences in gamma are significant for 10MV only(p-value6MV=0.094, P6MV=1; p-value10MV=0.011, P10MV=1). Conclusion: These results show vendor specified beam conformance across machines does not ensure equivalent patient specific QA pass rates. Gamma differences are statistically significant in three of the four comparisons for two pairs of vendor matched machines.« less

Livermore time-sharing system. Part I. Octopus. Chapter 5. Card reader/card punch. [Description of card reader and formats

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawrence, J.D.

1970-03-12

The Control Data 405 card reader, modified by the Control Data 3649 card read controller, is the primary mechanism for transferring information from a deck of punched cards into the CDC 6600 and CDC 7600 computers of the LLL Octopus system. The card reader operates at a maximum rate of 1200 cards per minute. A description of the card reader and its operation is given. A discussion of formates is included. (RWR)

Making GRADE accessible: a proposal for graphic display of evidence quality assessments.

PubMed

Khan, Khalid S; Borowiack, Ewa; Roos, Carolien; Kowalska, Monika; Zapalska, Anna; Mol, Ben W; Mignini, Luciano; Meads, Catherine; Walczak, Jacek

2011-06-01

When generating guidelines, quality of evidence is frequently reported in tabulated form capturing several domains, for example, study design, risk of bias and heterogeneity. Increasingly, this is done using the Grading of Recommendations Assessment, Development and Evaluation approach. As assimilating large amount of tabulated data across several comparisons and outcomes spread over many pages (sometimes hundreds) is not easy, there is a need to present evidence summaries in a more effective way. A graphic display plotting the several domains used in evidence grading on equiangular spokes starting from the same point, the data length of each spoke proportional to the magnitude of the quality, succinctly captures tabulated information. These plots allow easy identification of deficiencies, outliers and similarities in evidence quality for individual and multiple comparisons and outcomes, paving the way for their routine use alongside tabulated information.

CTF User's Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Avramova, Maria; Blyth, Taylor S.; Salko, Robert K.

This document describes how to make a CTF input deck. A CTF input deck is organized into Card Groups and Cards. A Card Group is a collection of Cards. A Card is defined as a line of input. Each Card may contain multiple data. A Card is terminated by making a new line.

29 CFR 4.123 - Administrative limitations, variances, tolerances, and exemptions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... servicing of cards (including credit cards, debit cards, purchase cards, smart cards, and similar card... military personnel in buying and selling homes (which shall not include actual moving or storage of...

A Mechanism for Anonymous Credit Card Systems

NASA Astrophysics Data System (ADS)

Tamura, Shinsuke; Yanase, Tatsuro

This paper proposes a mechanism for anonymous credit card systems, in which each credit card holder can conceal individual transactions from the credit card company, while enabling the credit card company to calculate the total expenditures of transactions of individual card holders during specified periods, and to identify card holders who executed dishonest transactions. Based on three existing mechanisms, i.e. anonymous authentication, blind signature and secure statistical data gathering, together with implicit transaction links proposed here, the proposed mechanism enables development of anonymous credit card systems without assuming any absolutely trustworthy entity like tamper resistant devices or organizations faithful both to the credit card company and card holders.

Solution structure of Apaf-1 CARD and its interaction with caspase-9 CARD: a structural basis for specific adaptor/caspase interaction.

PubMed

Zhou, P; Chou, J; Olea, R S; Yuan, J; Wagner, G

1999-09-28

Direct recruitment and activation of caspase-9 by Apaf-1 through the homophilic CARD/CARD (Caspase Recruitment Domain) interaction is critical for the activation of caspases downstream of mitochondrial damage in apoptosis. Here we report the solution structure of the Apaf-1 CARD domain and its surface of interaction with caspase-9 CARD. Apaf-1 CARD consists of six tightly packed amphipathic alpha-helices and is topologically similar to the RAIDD CARD, with the exception of a kink observed in the middle of the N-terminal helix. By using chemical shift perturbation data, the homophilic interaction was mapped to the acidic surface of Apaf-1 CARD centered around helices 2 and 3. Interestingly, a significant portion of the chemically perturbed residues are hydrophobic, indicating that in addition to the electrostatic interactions predicted previously, hydrophobic interaction is also an important driving force underlying the CARD/CARD interaction. On the basis of the identified functional residues of Apaf-1 CARD and the surface charge complementarity, we propose a model of CARD/CARD interaction between Apaf-1 and caspase-9.

A marketing approach to carpool demand analysis. Technical memorandum II. Survey tabulations and evaluation. Conservation paper. [Commuter survey in 3 major urban areas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1976-07-01

The memorandum contains many detailed tabulations, cross tabulations, and major conclusions for policy assessment resulting from a survey taken in connection with a research effort examining the role of individuals attitudes and perceptions in deciding whether or not to carpool. The research was based upon a survey of commuters in 3 major urban areas and has resulted in a sizeable new data base on respondents' socio-economic and worktrip characteristics, travel perceptions, and travel preferences.

Survey of United States Army Reserve (USAR) Troop Program Unit (TPU) soldiers 1989. Tabulation of Questionnaire Responses: Longitudinal Sample: Junior Enlisted Stayers from 1988 to 1989. 1989 Questionnaire Responses

DTIC Science & Technology

1989-09-30

AD-A237 531 1989 SURVEY OF UNITED STATES ARMY RESERVE (USAR) TROOP PROGRAM UNIT (TPU) SOLDIERS Tabulation of Questionnaire Responses: Longitudinal...Program Unit (TPU) Soldiers . The Tabulation Volumes list questionnaire items and the percent of respondents (weighted to population estimates) who have...Reserve population eligible for selection was defined by the number of personnel rec,,rds on a Dpeber 1988 SIDPERS data base; this totalled 280,265

23 CFR 635.113 - Bid opening and bid tabulations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CONSTRUCTION AND MAINTENANCE Contract Procedures § 635.113 Bid opening and bid tabulations. (a) All bids... contractors, during the period following the opening of bids and before the award of the contract shall not be...

In vitro reconstitution of interactions in the CARD9 signalosome

PubMed Central

Park, Jin Hee; Choi, Jae Young; Mustafa, Mir Faisal; Park, Hyun Ho

2017-01-01

The caspase-associated recruitment domain (CARD)-containing protein 9 (CARD9) signalosome is composed of CARD9, B-cell CLL/lymphoma 10 (BCL10) and mucosa-associated lymphoid tissue lymphoma translocation protein 1 (MALT1). The CARD9 signalosome has been reported to exert critical functions in the immunoreceptor tyrosine-based activation motif-coupled receptor-mediated activation of myeloid cells, through nuclear factor-κB pathways during innate immunity processes. During CARD9 signalosome assembly, BCL10 has been revealed to function as an adaptor protein and to interact with CARD9 via CARD-CARD interactions; BCL10 also interacts with MALT1 via its C-terminal Ser/Thr-rich region and the first immunoglobulin domain of MALT1. The CARD9 signalosome is implicated in critical biological processes; however, its structural and biochemical characteristics have yet to be elucidated. In the present study, CARD9 and BCL10 CARDs were successfully purified and characterized, and their biochemical properties were investigated. In addition, CARD9-BCL10 complexes were reconstituted in vitro under low salt and pH conditions. Furthermore, based on structural modeling data, a scheme was proposed to describe the interactions between CARD9 and BCL10. This provides a further understanding of the mechanism of how the CARD9 signalosome may be assembled. PMID:28765954

Imaging standards for smart cards

NASA Astrophysics Data System (ADS)

Ellson, Richard N.; Ray, Lawrence A.

1996-02-01

"Smart cards" are plastic cards the size of credit cards which contain integrated circuits for the storage of digital information. The applications of these cards for image storage has been growing as card data capacities have moved from tens of bytes to thousands of bytes. This has prompted the recommendation of standards by the X3B10 committee of ANSI for inclusion in ISO standards for card image storage of a variety of image data types including digitized signatures and color portrait images. This paper will review imaging requirements of the smart card industry, challenges of image storage for small memory devices, card image communications, and the present status of standards. The paper will conclude with recommendations for the evolution of smart card image standards towards image formats customized to the image content and more optimized for smart card memory constraints.

Imaging standards for smart cards

NASA Astrophysics Data System (ADS)

Ellson, Richard N.; Ray, Lawrence A.

1996-01-01

'Smart cards' are plastic cards the size of credit cards which contain integrated circuits for the storage of digital information. The applications of these cards for image storage has been growing as card data capacities have moved from tens of bytes to thousands of bytes. This has prompted the recommendation of standards by the X3B10 committee of ANSI for inclusion in ISO standards for card image storage of a variety of image data types including digitized signatures and color portrait images. This paper reviews imaging requirements of the smart card industry, challenges of image storage for small memory devices, card image communications, and the present status of standards. The paper concludes with recommendations for the evolution of smart card image standards towards image formats customized to the image content and more optimized for smart card memory constraints.

DOE-RCT-0003641 Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, Edward; Lesster, Ted

2014-07-30

This program studied novel concepts for an Axial Flux Reluctance Machine to capture energy from marine hydrokinetic sources and compared their attributes to a Radial Flux Reluctance Machine which was designed under a prior Department of Energy program for the same application. Detailed electromagnetic and mechanical analyses were performed to determine the validity of the concept and to provide a direct comparison with the existing conventional Radial Flux Switched Reluctance Machine designed during the Advanced Wave Energy Conversion Project, DE-EE0003641. The alternate design changed the machine topology so that the flux that is switched flows axially rather than radially andmore » the poles themselves are long radially, as opposed to the radial flux machine that has pole pieces that are long axially. It appeared possible to build an axial flux machine that should be considerably more compact than the radial machine. In an “apples to apples” comparison, the same rules with regard to generating magnetic force and the fundamental limitations of flux density hold, so that at the heart of the machine the same torque equations hold. The differences are in the mechanical configuration that limits or enhances the change of permeance with rotor position, in the amount of permeable iron required to channel the flux via the pole pieces to the air-gaps, and in the sizing and complexity of the electrical winding. Accordingly it was anticipated that the magnetic component weight would be similar but that better use of space would result in a shorter machine with accompanying reduction in housing and support structure. For the comparison the pole count was kept the same at 28 though it was also expected that the radial tapering of the slots between pole pieces would permit a higher pole count machine, enabling the generation of greater power at a given speed in some future design. The baseline Radial Flux Machine design was established during the previous DOE program. Its characteristics were tabulated for use in comparing to the Axial Flux Machine. Three basic conceptual designs for the Axial Flux Machine were considered: (1) a machine with a single coil at the inner diameter of the machine, (2) a machine with a single coil at the outside diameter of the machine, and (3) a machine with a coil around each tooth. Slight variations of these basic configurations were considered during the study. Analysis was performed on these configurations to determine the best candidate design to advance to preliminary design, based on size, weight, performance, cost and manufacturability. The configuration selected as the most promising was the multi-pole machine with a coil around each tooth. This configuration provided the least complexity with respect to the mechanical configuration and manufacturing, which would yield the highest reliability and lowest cost machine of the three options. A preliminary design was performed on this selected configuration. For this first ever axial design of the multi rotor configuration the 'apples to apples' comparison was based on using the same length of rotor pole as the axial length of rotor pole in the radial machine and making the mean radius of the rotor in the axial machine the same as the air gap radius in the radial machine. The tooth to slot ratio at the mean radius of the axial machine was the same as the tooth to slot ratio of the radial machine. The comparison between the original radial flux machine and the new axial flux machine indicates that for the same torque, the axial flux machine diameter will be 27% greater, but it will have 30% of the length, and 76% of the weight. Based on these results, it is concluded that an axial flux reluctance machine presents a viable option for large generators to be used for the capture of wave energy. In the analysis of Task 4, below, it is pointed out that our selection of dimensional similarity for the 'apples to apples' comparison did not produce an optimum axial flux design. There is torque capability to spare, implying we could reduce the magnetic structure, but the winding area, constrained by the pole separation at the inner pole radius has a higher resistance than desirable, implying we need more room for copper. The recommendation is to proceed via one cycle of optimization and review to correct this unbalance and then proceed to a detailed design phase to produce manufacturing drawings, followed by the construction of a prototype to test the performance of the machine against predicted results.« less

Reduced description of reactive flows with tabulation of chemistry

NASA Astrophysics Data System (ADS)

Ren, Zhuyin; Goldin, Graham M.; Hiremath, Varun; Pope, Stephen B.

2011-12-01

The direct use of large chemical mechanisms in multi-dimensional Computational Fluid Dynamics (CFD) is computationally expensive due to the large number of chemical species and the wide range of chemical time scales involved. To meet this challenge, a reduced description of reactive flows in combination with chemistry tabulation is proposed to effectively reduce the computational cost. In the reduced description, the species are partitioned into represented species and unrepresented species; the reactive system is described in terms of a smaller number of represented species instead of the full set of chemical species in the mechanism; and the evolution equations are solved only for the represented species. When required, the unrepresented species are reconstructed assuming that they are in constrained chemical equilibrium. In situ adaptive tabulation (ISAT) is employed to speed the chemistry calculation through tabulating information of the reduced system. The proposed dimension-reduction / tabulation methodology determines and tabulates in situ the necessary information of the nr-dimensional reduced system based on the ns-species detailed mechanism. Compared to the full description with ISAT, the reduced descriptions achieve additional computational speed-up by solving fewer transport equations and faster ISAT retrieving. The approach is validated in both a methane/air premixed flame and a methane/air non-premixed flame. With the GRI 1.2 mechanism consisting of 31 species, the reduced descriptions (with 12 to 16 represented species) achieve a speed-up factor of up to three compared to the full description with ISAT, with a relatively moderate decrease in accuracy compared to the full description.

Changes in alcohol consumption patterns following the introduction of credit cards in Ontario liquor stores.

PubMed

Macdonald, S A; Wells, S L; Giesbrecht, N; West, P M

1999-05-01

In 1994, regulatory changes were introduced in Ontario, Canada, permitting the purchase of alcoholic beverages with credit cards at government-operated liquor stores. Two objectives of this study were: (1) to compare the characteristics of credit card shoppers with non credit card shoppers at liquor stores, and (2) to assess whether changes occurred in alcohol consumption patterns among shoppers following the introduction of credit cards. Random digit dialing was used to interview 2,039 telephone participants prior to the introduction of credit cards (Time 1); 1,401 of these subjects were contacted 1 year later (Time 2). Independent sample t tests were used to compare credit card shoppers with shoppers not using credit cards, and paired t tests were performed to assess whether drinking behaviors changed from Time 1 to Time 2. The credit card shoppers were more likely than the non credit card shoppers to be highly educated (p < .001) and to have high incomes (p < .05). Credit card shoppers drank an average of 6.3 drinks over the previous week compared with 4.0 drinks among non credit card shoppers (p < .01). Although the overall amount of alcohol consumed among credit card shoppers dropped from 6.7 drinks at Time 1 to 6.3 at Time 2 (NS), credit card shoppers reported drinking significantly more often after credit cards were introduced (p < .05). The results suggest that credit cards may not present public health problems since significant increases in alcohol consumption among credit card shoppers were not found.

36 CFR 1254.84 - How may I use a debit card for copiers in the Washington, DC, area?

Code of Federal Regulations, 2010 CFR

2010-07-01

..., money order, debit card, or credit card. Your researcher identification card number as encoded on the... 1253 of this chapter, you may use cash or credit card to purchase a debit card from the vending... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false How may I use a debit card...

Dynamic Virtual Credit Card Numbers

NASA Astrophysics Data System (ADS)

Molloy, Ian; Li, Jiangtao; Li, Ninghui

Theft of stored credit card information is an increasing threat to e-commerce. We propose a dynamic virtual credit card number scheme that reduces the damage caused by stolen credit card numbers. A user can use an existing credit card account to generate multiple virtual credit card numbers that are either usable for a single transaction or are tied with a particular merchant. We call the scheme dynamic because the virtual credit card numbers can be generated without online contact with the credit card issuers. These numbers can be processed without changing any of the infrastructure currently in place; the only changes will be at the end points, namely, the card users and the card issuers. We analyze the security requirements for dynamic virtual credit card numbers, discuss the design space, propose a scheme using HMAC, and prove its security under the assumption the underlying function is a PRF.

Analysis of a Multiprocessor Guidance Computer. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Maltach, E. G.

1969-01-01

The design of the next generation of spaceborne digital computers is described. It analyzes a possible multiprocessor computer configuration. For the analysis, a set of representative space computing tasks was abstracted from the Lunar Module Guidance Computer programs as executed during the lunar landing, from the Apollo program. This computer performs at this time about 24 concurrent functions, with iteration rates from 10 times per second to once every two seconds. These jobs were tabulated in a machine-independent form, and statistics of the overall job set were obtained. It was concluded, based on a comparison of simulation and Markov results, that the Markov process analysis is accurate in predicting overall trends and in configuration comparisons, but does not provide useful detailed information in specific situations. Using both types of analysis, it was determined that the job scheduling function is a critical one for efficiency of the multiprocessor. It is recommended that research into the area of automatic job scheduling be performed.

Measurement of liner slips, milking time, and milk yield.

PubMed

O'Callaghan, E J

1996-03-01

Liner slip or rapid air leakage past the mouthpiece of the milking machine liner is related to high rates of new cases of mastitis. A real time technique was developed to monitor the air flow into the milking machine cluster during liner slips as well as to monitor milking time and milk yield using a commercial type pipeline milking system. The air flow into the cluster was measured by recording the pressure differences across an orifice plate placed in the air bypass of an air-milk separator using a differential pressure transducer. Milk yield was recorded by counting the number of milk releases from an electronic milk meter. The release solenoids of the milk meter were linked to a computer. The start and end of milking were manually recorded by switching a two-pole switch connected to a digital input card on the computer, which was programmed to record air flow, milk yield, and milking time. Milk yield, milking time, and air flows during liner slips were recorded simultaneously at each milking unit in an 11-unit herringbone parlor. The system was tested with an experiment with a 4 x 4 Latin square design using four treatments (clusters) and four treatment groups (22 cows per group).

Citizen empowerment using healthcare and welfare cards.

PubMed

Cheshire, Paul

2006-01-01

Cards are used in health and welfare to establish the identity of the person presenting the card; to prove their entitlement to a welfare or healthcare service; to store data needed within the care process; and to store data to use in the administration process. There is a desire to empower citizens - to give them greater control over their lives, their health and wellbeing. How can a healthcare and welfare card support this aim? Does having a card empower the citizen? What can a citizen do more easily, reliably, securely or cost-effectively because they have a card? A number of possibilities include: Choice of service provider; Mobility across regional and national boundaries; Privacy; and Anonymity. But in all of these possibilities a card is just one component of a total system and process, and there may be other solutions--technological and manual. There are risks and problems from relying on a card; and issues of Inclusion for people who are unable use a card. The article concludes that: cards need to be viewed in the context of the whole solution; cards are not the only technological mechanism; cards are not the best mechanism in all circumstances; but cards are very convenient method in very many situations.

PRT Impact Study Pre-PRT Phase : Volume 3. Frequency Tabulations from Four Transportation-Related Surveys

DOT National Transportation Integrated Search

1976-03-01

The report gives tabulations of survey responses which were collected in Morgantown, West Virginia, as part of a study to assess the impact of the installation of the Personal Rapid Transit (PRT) System.

Hydrogen technology survey: Thermophysical properties

NASA Technical Reports Server (NTRS)

Mccarty, R. D.

1975-01-01

The thermodynamic functions, transport properties, and physical properties of both liquid and gaseous hydrogen are presented. The low temperature regime is emphasized. The tabulation of the properties of normal hydrogen in both Si and engineering units is given along with the tabulation of parahydrogen.

A method for calculation of free-space sound pressures near a propeller in flight including considerations of the chordwise blade loading

NASA Technical Reports Server (NTRS)

Watkins, Charles E; Durling, Barbara J

1956-01-01

This report presents tabulated values of certain definite integral that are involved in the calculation of near-field propeller noise when the chordwise forces are assumed to be either uniform or of a Dirac delta type. The tabulations are over a wide range of operating conditions and are useful for estimating propeller noise when either the concept of an effective radius or radial distributions of forces are considered. Use of the tabulations is illustrated by several examples of calculated results for some specific propellers.

Comparative Study of the New Colorimetric VITEK 2 Yeast Identification Card versus the Older Fluorometric Card and of CHROMagar Candida as a Source Medium with the New Card

PubMed Central

Aubertine, C. L.; Rivera, M.; Rohan, S. M.; Larone, D. H.

2006-01-01

The new VITEK 2 colorimetric card was compared to the previous fluorometric card for identification of yeast. API 20C was considered the “gold standard.” The new card consistently performed better than the older card. Isolates from CHROMagar Candida plates were identified equally as well as those from Sabouraud dextrose agar. PMID:16390976

A microprocessor card software server to support the Quebec health microprocessor card project.

PubMed

Durant, P; Bérubé, J; Lavoie, G; Gamache, A; Ardouin, P; Papillon, M J; Fortin, J P

1995-01-01

The Quebec Health Smart Card Project is advocating the use of a memory card software server[1] (SCAM) to implement a portable medical record (PMR) on a smart card. The PMR is viewed as an object that can be manipulated by SCAM's services. In fact, we can talk about a pseudo-object-oriented approach. This software architecture provides a flexible and evolutive way to manage and optimize the PMR. SCAM is a generic software server; it can manage smart cards as well as optical (laser) cards or other types of memory cards. But, in the specific case of the Quebec Health Card Project, SCAM is used to provide services between physicians' or pharmacists' software and IBM smart card technology. We propose to expose the concepts and techniques used to provide a generic environment to deal with smart cards (and more generally with memory cards), to obtain a dynamic an evolutive PMR, to raise the system global security level and the data integrity, to optimize significantly the management of the PMR, and to provide statistic information about the use of the PMR.

VERA 3.6 - CTF User's Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Avramova, Maria; Toptan, Aysenur; Porter, Nathan

This document describes how to make a CTF input deck. A CTF input deck is organized into Card Groups and Cards. A Card Group is a collection of Cards. A Card is de ned as a line of input. Each Card may contain multiple data. A Card is terminated by making a new line. This document has been organized so that each Card Group is discussed in its own dedicated chapter. Each card is discused in its own dedicated section. Each data in the card is discussed in its own block. The block gives information about the data, including themore » number of the input, the title, a description of the meaning of the data, units, data type, and so on. An example block is shown below to discuss the meaning of each entry in the block.« less

Patients' Awareness, Usage and Impact of Hospital Report Cards in the US.

PubMed

Emmert, Martin; Schlesinger, Mark

2017-12-01

Little knowledge is available about the importance of hospital report cards in the US from the patients' perspective. It also remains unknown whether specific report cards with a stronger emphasis on clinical measures have a greater impact on hospital choice than general report cards that focus on online-derived ratings. The aim of this study was to determine the awareness and usage of hospital report cards as well as their impact on hospital choice in the US. We conducted a cross-sectional study by surveying a stratified online sample (N = 1332) to ensure representativeness to the US online population (February 2015). Overall, 75% of all respondents (mean age 45.4 years; 54% female) were aware of hospital report cards. Among these, 56% had used a report card to search for a hospital, and 80% of report card users stated having been influenced by a report card. Both the awareness and usage of general report cards were shown to be higher than for specific report cards. No significant differences could be detected regarding the impact between general or specific report cards on hospital choice. Our results indicate that hospital report cards play a considerable role among patients when searching for a hospital in the US; however, patients do not seem to have a preference regarding the type of report cards they use when selecting a hospital.

Integrated system for production of neutronics and photonics calculational constants. Neutron-induced interactions: bibliography of experimental data

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacGregor, M.H.; Cullen, D.E.; Howerton, R.J.

1976-07-04

The bibliographic citations in the Experimental Cross Section Information Library (ECSIL) as of July 4, 1976 are tabulated. The tabulation has three arrangements: alphabetically by author, alphabetically by publication, and numerically by reference number.

7 CFR 900.308 - Tabulation of ballots.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Conduct of Referenda To Determine Producer Approval of Milk Marketing Orders To Be Made Effective Pursuant to Agricultural Marketing Agreement Act of 1937, as Amended § 900.308 Tabulation of ballots. (a... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing...

The use of FTA cards for preserving unfixed cytological material for high-throughput molecular analysis.

PubMed

Saieg, Mauro Ajaj; Geddie, William R; Boerner, Scott L; Liu, Ni; Tsao, Ming; Zhang, Tong; Kamel-Reid, Suzanne; da Cunha Santos, Gilda

2012-06-25

Novel high-throughput molecular technologies have made the collection and storage of cells and small tissue specimens a critical issue. The FTA card provides an alternative to cryopreservation for biobanking fresh unfixed cells. The current study compared the quality and integrity of the DNA obtained from 2 types of FTA cards (Classic and Elute) using 2 different extraction protocols ("Classic" and "Elute") and assessed the feasibility of performing multiplex mutational screening using fine-needle aspiration (FNA) biopsy samples. Residual material from 42 FNA biopsies was collected in the cards (21 Classic and 21 Elute cards). DNA was extracted using the Classic protocol for Classic cards and both protocols for Elute cards. Polymerase chain reaction for p53 (1.5 kilobase) and CARD11 (500 base pair) was performed to assess DNA integrity. Successful p53 amplification was achieved in 95.2% of the samples from the Classic cards and in 80.9% of the samples from the Elute cards using the Classic protocol and 28.5% using the Elute protocol (P = .001). All samples (both cards) could be amplified for CARD11. There was no significant difference in the DNA concentration or 260/280 purity ratio when the 2 types of cards were compared. Five samples were also successfully analyzed by multiplex MassARRAY spectrometry, with a mutation in KRAS found in 1 case. High molecular weight DNA was extracted from the cards in sufficient amounts and quality to perform high-throughput multiplex mutation assays. The results of the current study also suggest that FTA Classic cards preserve better DNA integrity for molecular applications compared with the FTA Elute cards. Copyright © 2012 American Cancer Society.

Evaluation of a new solid media specimen transport card for high risk HPV detection and cervical cancer prevention.

PubMed

Maurer, Kathryn; Luo, Hongxue; Shen, Zhiyong; Wang, Guixiang; Du, Hui; Wang, Chun; Liu, Xiaobo; Wang, Xiamen; Qu, Xinfeng; Wu, Ruifang; Belinson, Jerome

2016-03-01

Solid media transport can be used to design adaptable cervical cancer screening programs but currently is limited by one card with published data. To develop and evaluate a solid media transport card for use in high-risk human papillomavirus detection (HR-HPV). The Preventative Oncology International (POI) card was constructed using PK 226 paper(®) treated with cell-lysing solution and indicating dye. Vaginal samples were applied to the POI card and the indicating FTA (iFTA) elute card. A cervical sample was placed in liquid media. All specimens were tested for HR-HPV. Color change was assessed at sample application and at card processing. Stability of the POI card and iFTA elute card was tested at humidity. 319 women were enrolled. Twelve women had at least one insufficient sample with no difference between media (p=0.36). Compared to liquid samples, there was good agreement for HR-HPV detection with kappa of 0.81 (95% CI 0.74-0.88) and 0.71 (95% CI 0.62-0.79) for the POI and iFTA elute card respectively. Sensitivity for ≥CIN2 was 100% (CI 100-100%), 95.1% (CI 92.7-97.6%), and 93.5% (CI 90.7-96.3%) for the HR-HPV test from the liquid media, POI card, and iFTA elute card respectively. There was no color change of the POI card noted in humidity but the iFTA elute card changed color at 90% humidity. The POI card is suitable for DNA transport and HR-HPV testing. This card has the potential to make cervical cancer screening programs more affordable worldwide. Copyright © 2015 Elsevier B.V. All rights reserved.

Optimization of a novel large field of view distortion phantom for MR-only treatment planning.

PubMed

Price, Ryan G; Knight, Robert A; Hwang, Ken-Pin; Bayram, Ersin; Nejad-Davarani, Siamak P; Glide-Hurst, Carri K

2017-07-01

MR-only treatment planning requires images of high geometric fidelity, particularly for large fields of view (FOV). However, the availability of large FOV distortion phantoms with analysis software is currently limited. This work sought to optimize a modular distortion phantom to accommodate multiple bore configurations and implement distortion characterization in a widely implementable solution. To determine candidate materials, 1.0 T MR and CT images were acquired of twelve urethane foam samples of various densities and strengths. Samples were precision-machined to accommodate 6 mm diameter paintballs used as landmarks. Final material candidates were selected by balancing strength, machinability, weight, and cost. Bore sizes and minimum aperture width resulting from couch position were tabulated from the literature (14 systems, 5 vendors). Bore geometry and couch position were simulated using MATLAB to generate machine-specific models to optimize the phantom build. Previously developed software for distortion characterization was modified for several magnet geometries (1.0 T, 1.5 T, 3.0 T), compared against previously published 1.0 T results, and integrated into the 3D Slicer application platform. All foam samples provided sufficient MR image contrast with paintball landmarks. Urethane foam (compressive strength ∼1000 psi, density ~20 lb/ft 3 ) was selected for its accurate machinability and weight characteristics. For smaller bores, a phantom version with the following parameters was used: 15 foam plates, 55 × 55 × 37.5 cm 3 (L×W×H), 5,082 landmarks, and weight ~30 kg. To accommodate > 70 cm wide bores, an extended build used 20 plates spanning 55 × 55 × 50 cm 3 with 7,497 landmarks and weight ~44 kg. Distortion characterization software was implemented as an external module into 3D Slicer's plugin framework and results agreed with the literature. The design and implementation of a modular, extendable distortion phantom was optimized for several bore configurations. The phantom and analysis software will be available for multi-institutional collaborations and cross-validation trials to support MR-only planning. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

A comparison of treatment-seeking pathological gamblers based on preferred gambling activity.

PubMed

Petry, Nancy M

2003-05-01

To compare and contrast gamblers with different forms of problematic gambling activities. DESIGN, SETTING AND MEASUREMENTS: Pathological gamblers completed the Addiction Severity Index (ASI) and gambling questionnaires when initiating out-patient treatment. Participants (n = 347) were categorized by their most problematic form of gambling activity: sports, horse/dog-races, cards, slots and scratch/lottery tickets. Differences in demographics, gambling variables, and ASI composite scores were compared across groups. After controlling for demographic variables, the types of gamblers differed in severity of gambling, alcohol and psychiatric problems. Horse/dog-race gamblers were generally older, male and less educated; they began gambling regularly at a young age and spent relatively high amounts of money gambling. Sports gamblers were young males and had intermediary gambling problems; they had relatively high rates of current substance use but few psychiatric problems. Card players spent low to moderate amounts of time and money gambling, and they generally reported few alcohol problems and little psychiatric distress. Slot machine players were older and more likely to be female. Slot gamblers began gambling later in life, had high rates of bankruptcy and reported psychiatric difficulties. Scratch/lottery gamblers spent the least amount of money gambling, but they gambled the most frequently and had relatively severe alcohol and psychiatric symptoms. Gambling patterns and severity of psychosocial problems vary by form of problematic gambling, and these differences may influence treatment recommendations and outcomes.

Iridovirus CARD Protein Inhibits Apoptosis through Intrinsic and Extrinsic Pathways

PubMed Central

Chen, Chien-Wen; Wu, Ming-Shan; Huang, Yi-Jen; Lin, Pei-Wen; Shih, Chueh-Ju; Lin, Fu-Pang; Chang, Chi-Yao

2015-01-01

Grouper iridovirus (GIV) belongs to the genus Ranavirus of the family Iridoviridae; the genomes of such viruses contain an anti-apoptotic caspase recruitment domain (CARD) gene. The GIV-CARD gene encodes a protein of 91 amino acids with a molecular mass of 10,505 Daltons, and shows high similarity to other viral CARD genes and human ICEBERG. In this study, we used Northern blot to demonstrate that GIV-CARD transcription begins at 4 h post-infection; furthermore, we report that its transcription is completely inhibited by cycloheximide but not by aphidicolin, indicating that GIV-CARD is an early gene. GIV-CARD-EGFP and GIV-CARD-FLAG recombinant proteins were observed to translocate from the cytoplasm into the nucleus, but no obvious nuclear localization sequence was observed within GIV-CARD. RNA interference-mediated knockdown of GIV-CARD in GK cells infected with GIV inhibited expression of GIV-CARD and five other viral genes during the early stages of infection, and also reduced GIV infection ability. Immunostaining was performed to show that apoptosis was effectively inhibited in cells expressing GIV-CARD. HeLa cells irradiated with UV or treated with anti-Fas antibody will undergo apoptosis through the intrinsic and extrinsic pathways, respectively. However, over-expression of recombinant GIV-CARD protein in HeLa cells inhibited apoptosis induced by mitochondrial and death receptor signaling. Finally, we report that expression of GIV-CARD in HeLa cells significantly reduced the activities of caspase-8 and -9 following apoptosis triggered by anti-Fas antibody. Taken together, these results demonstrate that GIV-CARD inhibits apoptosis through both intrinsic and extrinsic pathways. PMID:26047333

[Study for portable dynamic ECG monitor and recorder].

PubMed

Yang, Pengcheng; Li, Yongqin; Chen, Bihua

2012-09-01

This Paper presents a portable dynamic ECG monitor system based on MSP430F149 microcontroller. The electrocardiogram detecting system consists of ECG detecting circuit, man-machine interaction module, MSP430F149 and upper computer software. The ECG detecting circuit including a preamplifier, second-order Butterworth low-pass filter, high-pass filter, and 50Hz trap circuit to detects electrocardiogram and depresses various kinds of interference effectively. A microcontroller is used to collect three channel analog signals which can be displayed on TFT LCD. A SD card is used to record real-time data continuously and implement the FTA16 file system. In the end, a host computer system interface is also designed to analyze the ECG signal and the analysis results can provide diagnosis references to clinical doctors.

AUTOMATIC CALIBRATING SYSTEM FOR PRESSURE TRANSDUCERS

DOEpatents

Amonette, E.L.; Rodgers, G.W.

1958-01-01

An automatic system for calibrating a number of pressure transducers is described. The disclosed embodiment of the invention uses a mercurial manometer to measure the air pressure applied to the transducer. A servo system follows the top of the mercury column as the pressure is changed and operates an analog- to-digital converter This converter furnishes electrical pulses, each representing an increment of pressure change, to a reversible counterThe transducer furnishes a signal at each calibration point, causing an electric typewriter and a card-punch machine to record the pressure at the instant as indicated by the counter. Another counter keeps track of the calibration points so that a number identifying each point is recorded with the corresponding pressure. A special relay control system controls the pressure trend and programs the sequential calibration of several transducers.

Encoder fault analysis system based on Moire fringe error signal

NASA Astrophysics Data System (ADS)

Gao, Xu; Chen, Wei; Wan, Qiu-hua; Lu, Xin-ran; Xie, Chun-yu

2018-02-01

Aiming at the problem of any fault and wrong code in the practical application of photoelectric shaft encoder, a fast and accurate encoder fault analysis system is researched from the aspect of Moire fringe photoelectric signal processing. DSP28335 is selected as the core processor and high speed serial A/D converter acquisition card is used. And temperature measuring circuit using AD7420 is designed. Discrete data of Moire fringe error signal is collected at different temperatures and it is sent to the host computer through wireless transmission. The error signal quality index and fault type is displayed on the host computer based on the error signal identification method. The error signal quality can be used to diagnosis the state of error code through the human-machine interface.

Accuracy of autotitrating CPAP to estimate the residual Apnea-Hypopnea Index in patients with obstructive sleep apnea on treatment with autotitrating CPAP.

PubMed

Desai, Himanshu; Patel, Anil; Patel, Pinal; Grant, Brydon J B; Mador, M Jeffery

2009-11-01

Autotitrating continuous positive airway pressure (auto-CPAP) devices now have a smart card (a pocket-sized card with embedded integrated circuits which records data from the CPAP machine such as CPAP usage, CPAP pressure, large leak, etc.) which can estimate the Apnea-Hypopnea Index (AHI) on therapy. The aim of this study was to determine the accuracy of auto-CPAP in estimating the residual AHI in patients with obstructive sleep apnea (OSA) who were treated with auto-CPAP without a CPAP titration study. We studied 99 patients with OSA from April 2005 to May 2007 who underwent a repeat sleep study using auto-CPAP. The estimated AHI from auto-CPAP was compared with the AHI from an overnight polysomnogram (PSG) on auto-CPAP using Bland-Altman plot and likelihood ratio analyses. A PSG AHI cutoff of five events per hour was used to differentiate patients optimally treated with auto-CPAP from those with residual OSA on therapy. Bland and Altman analysis showed good agreement between auto-CPAP AHI and PSG AHI. There was no significant bias when smart card estimates of AHI at home were compared to smart card estimates obtained in the sleep laboratory. An auto-CPAP cutoff for the AHI of six events per hour was shown to be optimal for differentiating patients with and without residual OSA with a sensitivity of 0.92 (95% confidence interval (CI) 0.76 to 0.98) and specificity of 0.90 (95% CI 0.82 to 0.95) with a positive likelihood ratio (LR) of 9.6 (95% CI 5.1 to 21.5) and a negative likelihood ratio of 0.085 (95% CI 0.02 to 0.25). Auto-CPAP AHI of eight events per hour yielded the optimal sensitivity (0.94, 95% CI 0.73 to 0.99) and specificity (0.90, 95% CI 0.82 to 0.95) with a positive LR of 9.6 (95% CI 5.23 to 20.31) and a negative LR of 0.065 (95% CI 0.004 to 0.279) to identify patients with a PSG AHI of > or = 10 events per hour. Auto-CPAP estimate of AHI may be used to estimate residual AHI in patients with OSA of varying severity treated with auto-CPAP.

Patron ID Cards Made Easy and Cheap

ERIC Educational Resources Information Center

Peischl, Tom

1978-01-01

Four major problems of academic library identification cards are expense, distribution, timeliness, and validation. By moving from a commercially produced plastic library card to a locally produced paper IBM-type card, this library solved these four library card problems. (Author)

Diamagnetic Corrections and Pascal's Constants

ERIC Educational Resources Information Center

Bain, Gordon A.; Berry, John F.

2008-01-01

Measured magnetic susceptibilities of paramagnetic substances must typically be corrected for their underlying diamagnetism. This correction is often accomplished by using tabulated values for the diamagnetism of atoms, ions, or whole molecules. These tabulated values can be problematic since many sources contain incomplete and conflicting data.…

TABULATED EQUIVALENT SDR FLAMELET (TESF) MODEFL

DOE Office of Scientific and Technical Information (OSTI.GOV)

KUNDU, PRITHWISH; AMEEN, mUHSIN MOHAMMED; UNNIKRISHNAN, UMESH

The code consists of an implementation of a novel tabulated combustion model for non-premixed flames in CFD solvers. This novel technique/model is used to implement an unsteady flamelet tabulation without using progress variables for non-premixed flames. It also has the capability to include history effects which is unique within tabulated flamelet models. The flamelet table generation code can be run in parallel to generate tables with large chemistry mechanisms in relatively short wall clock times. The combustion model/code reads these tables. This framework can be coupled with any CFD solver with RANS as well as LES turbulence models. This frameworkmore » enables CFD solvers to run large chemistry mechanisms with large number of grids at relatively lower computational costs. Currently it has been coupled with the Converge CFD code and validated against available experimental data. This model can be used to simulate non-premixed combustion in a variety of applications like reciprocating engines, gas turbines and industrial burners operating over a wide range of fuels.« less

Evidence of photosymbiosis in Palaeozoic tabulate corals.

PubMed

Zapalski, Mikolaj K

2014-01-22

Coral reefs form the most diverse of all marine ecosystems on the Earth. Corals are among their main components and owe their bioconstructing abilities to a symbiosis with algae (Symbiodinium). The coral-algae symbiosis had been traced back to the Triassic (ca 240 Ma). Modern reef-building corals (Scleractinia) appeared after the Permian-Triassic crisis; in the Palaeozoic, some of the main reef constructors were extinct tabulate corals. The calcium carbonate secreted by extant photosymbiotic corals bears characteristic isotope (C and O) signatures. The analysis of tabulate corals belonging to four orders (Favositida, Heliolitida, Syringoporida and Auloporida) from Silurian to Permian strata of Europe and Africa shows these characteristic carbon and oxygen stable isotope signatures. The δ(18)O to δ(13)C ratios in recent photosymbiotic scleractinians are very similar to those of Palaeozoic tabulates, thus providing strong evidence of such symbioses as early as the Middle Silurian (ca 430 Ma). Corals in Palaeozoic reefs used the same cellular mechanisms for carbonate secretion as recent reefs, and thus contributed to reef formation.

The use of point-of-sale machines in school cafeterias as a method of parental influence over child lunch food choices.

PubMed

Andrepont, Emmy; Cullen, Karen W; Taylor, Wendell C

2011-05-01

Computerized point-of-sale (POS) machine software that allows parents to place restrictions on their child's school meal accounts is available. Parents could restrict specific foods (eg, chips), identify specific days the child can purchase extra foods, or set monetary limits. This descriptive study examines the use of parental restrictions on student cafeteria POS accounts in a convenience sample of 2 school districts. POS alerts, with student gender, grade, ethnicity, and students' free or reduced-price meal eligibility, were obtained from 2 school food service departments for the 2007-2008 school year. The alerts were coded into 5 categories: financial, medical, restrictions, snacks OK, and extras OK. The distribution of alerts by district, students, and demographics was then tabulated. District A (4839 students) had more students with alerts (n = 789, 16%) than District B (8510 students; n = 217, 2.6%), and 94 District A students had a second alert. District A parents had to provide written permission for their child to purchase snacks (n = 654, 13.5%) and extra meal items (n = 113, 2.3%). Most alerts were for full-pay students in both districts (74% and 66%) and varied by demographics of the students. Few parents actually used this system to limit student purchases of foods outside the school meal. Future studies should investigate the influence of these restrictions on student food choices. © 2011, American School Health Association.

Family Registration Card as electronic medical carrier in Bosnia and Herzegovina.

PubMed

Novo, Ahmed; Masic, Izet; Toromanovic, Selim; Loncarevic, Nedim; Junuzovic, Dzelaludin; Dizdarevic, Jadranka

2004-01-01

Medical documentation is a very important part of the medical documentalistics and is occupies a large part of daily work of medical staff working in Primary Health Care. Paper documentation is going to be replaced by electronic cards in Bosnia and Herzegovina and a new Health Care System is under development, based on an Electronic Family Registration Card. Developed countries proceeded from the manual and semiautomatic method of medical data processing to the new method of entering, storage, transferring, searching and protecting data, using electronic equipment. Currently, many European countries have developed a Medical Card Based Electronic Information System. Three types of electronic card are currently in use: a Hybrid Card, a Smart Card and a Laser Card. The dilemma is which card should be used as a data carrier. The Electronic Family Registration Cared is a question of strategic interest for B&H, but also a great investment. We should avoid the errors of other countries that have been developing card-based system. In this article we present all mentioned cards and compare advantages and disadvantages of different technologies.

Gas cooled traction drive inverter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chinthavali, Madhu Sudhan

The present invention provides a modular circuit card configuration for distributing heat among a plurality of circuit cards. Each circuit card includes a housing adapted to dissipate heat in response to gas flow over the housing. In one aspect, a gas-cooled inverter includes a plurality of inverter circuit cards, and a plurality of circuit card housings, each of which encloses one of the plurality of inverter cards.

Gas cooled traction drive inverter

DOEpatents

Chinthavali, Madhu Sudhan

2013-10-08

The present invention provides a modular circuit card configuration for distributing heat among a plurality of circuit cards. Each circuit card includes a housing adapted to dissipate heat in response to gas flow over the housing. In one aspect, a gas-cooled inverter includes a plurality of inverter circuit cards, and a plurality of circuit card housings, each of which encloses one of the plurality of inverter cards.

Empirical analysis of knowledge bases to support structured output in the Arden syntax.

PubMed

Jenders, Robert A

2013-01-01

Structured output has been suggested for the Arden Syntax to facilitate interoperability. Tabulate the components of WRITE statements in a corpus of medical logic modules (MLMs)in order to validate requiring structured output. WRITE statements were tabulated in 258 MLMs from 2 organizations. In a total of 351 WRITE statements, email destinations (226) predominated, and 39 orders and 40 coded output elements also were tabulated. Free-text strings predominated as the message data. Arden WRITE statements contain considerable potentially structured data now included as free text. A future, normative structured WRITE statement must address a variety of data types and destinations.

Application of an artificial neural network to pump card diagnosis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ashenayi, K.; Lea, J.F.; Kemp, F.

1994-12-01

Beam pumping is the most frequently used artificial-lift technique for oil production. Downhole pump cards are used to evaluate performance of the pumping unit. Pump cards can be generated from surface dynamometer cards using a 1D wave equation with viscous damping, as suggested by Gibbs and Neely. Pump cards contain significant information describing the behavior of the pump. However, interpretation of these cards is tedious and time-consuming; hence, an automated system capable of interpreting these cards could speed interpretation and warn of pump failures. This work presents the results of a DOS-based computer program capable of correctly classifying pump cards.more » The program uses a hybrid artificial neural network (ANN) to identify significant features of the pump card. The hybrid ANN uses classical and sinusoidal perceptrons. The network is trained using an error-back-propagation technique. The program correctly identified pump problems for more than 180 different training and test pump cards. The ANN takes a total of 80 data points as input. Sixty data points are collected from the pump card perimeter, and the remaining 20 data points represent the slope at selected points on the pump card perimeter. Pump problem conditions are grouped into 11 distinct classes. The network is capable of identifying one or more of these problem conditions for each pump card. Eight examples are presented and discussed.« less

Passive microfluidic array card and reader

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dugan, Lawrence Christopher; Coleman, Matthew A

A microfluidic array card and reader system for analyzing a sample. The microfluidic array card includes a sample loading section for loading the sample onto the microfluidic array card, a multiplicity of array windows, and a transport section or sections for transporting the sample from the sample loading section to the array windows. The microfluidic array card reader includes a housing, a receiving section for receiving the microfluidic array card, a viewing section, and a light source that directs light to the array window of the microfluidic array card and to the viewing section.

Interaction geometry: an ecological perspective.

Treesearch

Rolfe A. Leary

1976-01-01

A new mathematical coordinate system results from a unique combination of two frameworks long used by ecologists: the phase plane and coaction cross-tabulation. The resulting construct combines the classifying power of the cross-tabulation and discriminating power of the phase plane. It may be used for analysis and synthesis.

Tabulated Neutron Emission Rates for Plutonium Oxide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shores, Erik Frederick

This work tabulates neutron emission rates for 80 plutonium oxide samples as reported in the literature. Plutonium-­238 and plutonium-­239 oxides are included and such emission rates are useful for scaling tallies from Monte Carlo simulations and estimating dose rates for health physics applications.

Medication safety--reliability of preference cards.

PubMed

Dawson, Anthony; Orsini, Michael J; Cooper, Mary R; Wollenburg, Karol

2005-09-01

A CLINICAL ANALYSIS of surgeons' preference cards was initiated in one hospital as part of a comprehensive analysis to reduce medication-error risks by standardizing and simplifying the intraoperative medication-use process specific to the sterile field. THE PREFERENCE CARD ANALYSIS involved two subanalyses: a review of the information as it appeared on the cards and a failure mode and effects analysis of the process involved in using and maintaining the cards. THE ANALYSIS FOUND that the preference card system in use at this hospital is outdated. Variations and inconsistencies within the preference card system indicate that the use of preference cards as guides for medication selection for surgical procedures presents an opportunity for medication errors to occur.

An a priori study of different tabulation methods for turbulent pulverised coal combustion

NASA Astrophysics Data System (ADS)

Luo, Yujuan; Wen, Xu; Wang, Haiou; Luo, Kun; Jin, Hanhui; Fan, Jianren

2018-05-01

In many practical pulverised coal combustion systems, different oxidiser streams exist, e.g. the primary- and secondary-air streams in the power plant boilers, which makes the modelling of these systems challenging. In this work, three tabulation methods for modelling pulverised coal combustion are evaluated through an a priori study. Pulverised coal flames stabilised in a three-dimensional turbulent counterflow, consisting of different oxidiser streams, are simulated with detailed chemistry first. Then, the thermo-chemical quantities calculated with different tabulation methods are compared to those from detailed chemistry solutions. The comparison shows that the conventional two-stream flamelet model with a fixed oxidiser temperature cannot predict the flame temperature correctly. The conventional two-stream flamelet model is then modified to set the oxidiser temperature equal to the fuel temperature, both of which are varied in the flamelets. By this means, the variations of oxidiser temperature can be considered. It is found that this modified tabulation method performs very well on prediction of the flame temperature. The third tabulation method is an extended three-stream flamelet model that was initially proposed for gaseous combustion. The results show that the reference gaseous temperature profile can be overall reproduced by the extended three-stream flamelet model. Interestingly, it is found that the predictions of major species mass fractions are not sensitive to the oxidiser temperature boundary conditions for the flamelet equations in the a priori analyses.

Caspase recruitment domain 6 protects against hepatic ischemia/reperfusion injury by suppressing ASK1.

PubMed

Qin, Juan-Juan; Mao, Wenzhe; Wang, Xiaozhan; Sun, Peng; Cheng, Daqing; Tian, Song; Zhu, Xue-Yong; Yang, Ling; Huang, Zan; Li, Hongliang

2018-06-26

The comprehensive interplay in sterile inflammation and liver cell death predominantly determines hepatic injury caused by ischemia/reperfusion (I/R) insult. Caspase recruitment domain family member 6 (CARD6) was initially shown to play important roles in NF-κB activation. In our preliminary studies, CARD6 downregulation was closely related to hepatic I/R injury in liver transplantation patients and mouse models. Thus, we hypothesized that CARD6 protects against hepatic I/R injury and investigated the underlying molecular mechanisms. A partial hepatic I/R operation was performed in hepatocyte-specific Card6 knockout mice (HKO), Card6 transgenic mice with CARD6 overexpression specifically in hepatocytes (HTG), and the corresponding control mice. Hepatic histology, serum aminotransferase, inflammatory cytokines/chemokines, cell death, and inflammatory signaling were examined to assess liver damage. The molecular mechanisms of CARD6 function were explored in vivo and in vitro. Card6-HTG mice alleviated liver injury compared with control mice as shown by decreased cell death, lower serum transaminase levels, and reduced inflammation and infiltration, whereas Card6-HKO mice had the opposite phenotype. Mechanistically, phosphorylation of ASK1 and its downstream effectors JNK and p38 were increased in the livers of Card6-HKO mice but repressed in those of Card6-HTG mice. Furthermore, ASK1 knockdown normalized the effect of CARD6 deficiency on the activation of NF-κB, JNK and p38, while ASK1 overexpression abrogated the suppressive effect of CARD6. Finally, CARD6 interacted with Ask1. Mutant CARD6 that lacked the ability to interact with ASK1 could not inhibit ASK1 and failed to protect against hepatic I/R injury. CARD6 is a novel protective factor of hepatic I/R injury that suppresses inflammation and liver cell death by inhibiting the ASK1 signaling pathway. CARD6 participate and play an important role during the process of liver blood flow restriction followed by restoring. Through suppressing the activity of ASK1, CARD6 can protect against hepatocytes injury. Targeting CARD6 can be a strategy for precaution and treatment of this disease. Copyright © 2018 European Association for the Study of the Liver. Published by Elsevier B.V. All rights reserved.

48 CFR 32.1108 - Payment by Governmentwide commercial purchase card.

Code of Federal Regulations, 2010 CFR

2010-10-01

... commercial purchase card. 32.1108 Section 32.1108 Federal Acquisition Regulations System FEDERAL ACQUISITION... Governmentwide commercial purchase card. A Governmentwide commercial purchase card charge authorizes the third party (e.g., financial institution) that issued the purchase card to make immediate payment to the...

75 FR 10414 - Researcher Identification Card

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-08

... capturing administrative information on the characteristics of our users. Other forms of identification are... use bar-codes on researcher identification cards in the Washington, DC, area. The plastic cards we... plastic researcher identification cards as part of their security systems, we issue a plastic card to...

48 CFR 2913.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2010 CFR

2010-10-01

... purchase card. 2913.301 Section 2913.301 Federal Acquisition Regulations System DEPARTMENT OF LABOR... commercial purchase card. (a) The Government purchase card has far fewer requirements for documentation than other methods of purchasing. However, the same legal restrictions apply to credit card purchases that...

You Can Teach an Old Magician New Tricks

ERIC Educational Resources Information Center

Bonomo, John P.

2008-01-01

Mathematics forms the basis for many types of card tricks. One of the best-known works as follows: Take any 15 cards out of a deck and ask a volunteer to select one of the cards and place it back in the deck. After shuffling the cards, you deal out three piles of cards and ask the volunteer which pile his or her card is in. You collect up the…

Correlates of credit card ownership in men and women.

PubMed

Yang, Bijou; Lester, David

2005-06-01

In a sample of 352 students, correlates of credit card ownership differed by sex. For both men and women, credit card ownership was predicted by their affective attitude toward credit cards. However, whereas for men concern with money as a tactic for gaining power predicted credit card ownership, for women feelings of insecurity about having sufficient money and having a conservative approach to money predicted credit card ownership.

Cognitive Aids for Role Definition (CARD) to improve interprofessional team crisis resource management: An exploratory study.

PubMed

Renna, Tania Di; Crooks, Simone; Pigford, Ashlee-Ann; Clarkin, Chantalle; Fraser, Amy B; Bunting, Alexandra C; Bould, M Dylan; Boet, Sylvain

2016-09-01

This study aimed to assess the perceived value of the Cognitive Aids for Role Definition (CARD) protocol for simulated intraoperative cardiac arrests. Sixteen interprofessional operating room teams completed three consecutive simulated intraoperative cardiac arrest scenarios: current standard, no CARD; CARD, no CARD teaching; and CARD, didactic teaching. Each team participated in a focus group interview immediately following the third scenario; data were transcribed verbatim and qualitatively analysed. After 6 months, participants formed eight new teams randomised to two groups (CARD or no CARD) and completed a retention intraoperative cardiac arrest simulation scenario. All simulation sessions were video recorded and expert raters assessed team performance. Qualitative analysis of the 16 focus group interviews revealed 3 thematic dimensions: role definition in crisis management; logistical issues; and the "real life" applicability of CARD. Members of the interprofessional team perceived CARD very positively. Exploratory quantitative analysis found no significant differences in team performance with or without CARD (p > 0.05). In conclusion, qualitative data suggest that the CARD protocol clarifies roles and team coordination during interprofessional crisis management and has the potential to improve the team performance. The concept of a self-organising team with defined roles is promising for patient safety.

Development of a Digitalized Child's Checkups Information System.

PubMed

Ito, Yoshiya; Takimoto, Hidemi

2017-01-01

In Japan, health checkups for children take place from infancy through high school and play an important role in the maintenance and control of childhood/adolescent health. The anthropometric data obtained during these checkups are kept in health centers and schools and are also recorded in a mother's maternal and child health handbook, as well as on school health cards. These data are meaningful if they are utilized well and in an appropriate manner. They are particularly useful for the prevention of obesity-related conditions in adulthood, such as metabolic syndrome and diabetes mellitus. For this purpose, we have tried to establish a scanning system with an optical character recognition (OCR) function, which links data obtained during health checkups in infancy with that obtained in schools. In this system, handwritten characters on the records are scanned and processed using OCR. However, because many of the scanned characters are not read properly, we must wait for the improvement in the performance of the OCR function. In addition, we have developed Microsoft Excel spreadsheets, on which obesity-related indices, such as body mass index and relative body weight, are calculated. These sheets also provide functions that tabulate the frequencies of obesity in specific groups. Actively using these data and digitalized systems will not only contribute towards resolving physical health problems in children, but also decrease the risk of developing lifestyle-related diseases in adulthood.

Evolution of a Novel Antiviral Immune-Signaling Interaction by Partial-Gene Duplication

PubMed Central

Korithoski, Bryan; Kolaczkowski, Oralia; Mukherjee, Krishanu; Kola, Reema; Earl, Chandra; Kolaczkowski, Bryan

2015-01-01

The RIG-like receptors (RLRs) are related proteins that identify viral RNA in the cytoplasm and activate cellular immune responses, primarily through direct protein-protein interactions with the signal transducer, IPS1. Although it has been well established that the RLRs, RIG-I and MDA5, activate IPS1 through binding between the twin caspase activation and recruitment domains (CARDs) on the RLR and a homologous CARD on IPS1, it is less clear which specific RLR CARD(s) are required for this interaction, and almost nothing is known about how the RLR-IPS1 interaction evolved. In contrast to what has been observed in the presence of immune-modulating K63-linked polyubiquitin, here we show that—in the absence of ubiquitin—it is the first CARD domain of human RIG-I and MDA5 (CARD1) that binds directly to IPS1 CARD, and not the second (CARD2). Although the RLRs originated in the earliest animals, both the IPS1 gene and the twin-CARD domain architecture of RIG-I and MDA5 arose much later in the deuterostome lineage, probably through a series of tandem partial-gene duplication events facilitated by tight clustering of RLRs and IPS1 in the ancestral deuterostome genome. Functional differentiation of RIG-I CARD1 and CARD2 appears to have occurred early during this proliferation of RLR and related CARDs, potentially driven by adaptive coevolution between RIG-I CARD domains and IPS1 CARD. However, functional differentiation of MDA5 CARD1 and CARD2 occurred later. These results fit a general model in which duplications of protein-protein interaction domains into novel gene contexts could facilitate the expansion of signaling networks and suggest a potentially important role for functionally-linked gene clusters in generating novel immune-signaling pathways. PMID:26356745

48 CFR 552.232-77 - Payment By Government Charge Card.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Charge Card. 552.232-77 Section 552.232-77 Federal Acquisition Regulations System GENERAL SERVICES....232-77 Payment By Government Charge Card. As prescribed in 532.7003, insert the following clause: Payment By Government Charge Card (NOV 2009) (a) Definitions. “Governmentwide commercial purchase card...

Study of short haul high-density V/STOL transportation systems. Volume 2: Appendices

NASA Technical Reports Server (NTRS)

Solomon, H. L.

1972-01-01

Essential supporting data to the short haul transportation study are presented. The specific appendices are arena characteristics, aerospace transportation analysis computer program, economics, model calibration, STOLport siting and services path selection, STOL schedule definition, tabulated California corridor results, and tabulated Midwest arena results.

Floods in the Wapsipinicon River Basin, Iowa

USGS Publications Warehouse

Schwob, Harlan H.

1971-01-01

Flood-profile sheets show profiles of actual flood occurrences and computed profiles of the 25- and 50-year floods at most locations. These sheets also contain tabulations of the flood discharges profiled. A low-water profile and tabulated discharge indicate the range in elevation and discharge along the streams.

Model aerodynamic test results for two variable cycle engine coannular exhaust systems at simulated takeoff and cruise conditions. Comprehensive data report. Volume 2: Tabulated aerodynamic data book 2

NASA Technical Reports Server (NTRS)

Nelson, D. P.

1981-01-01

Tabulated aerodynamic data from coannular nozzle performance tests are given for test runs 26 through 37. The data include nozzle thrust coefficient parameters, nozzle discharge coefficients, and static pressure tap measurements.

Research Trends with Cross Tabulation Search Engine

ERIC Educational Resources Information Center

Yin, Chengjiu; Hirokawa, Sachio; Yau, Jane Yin-Kim; Hashimoto, Kiyota; Tabata, Yoshiyuki; Nakatoh, Tetsuya

2013-01-01

To help researchers in building a knowledge foundation of their research fields which could be a time-consuming process, the authors have developed a Cross Tabulation Search Engine (CTSE). Its purpose is to assist researchers in 1) conducting research surveys, 2) efficiently and effectively retrieving information (such as important researchers,…

Credit Cards. Bulletin No. 721. (Revised.)

ERIC Educational Resources Information Center

Fox, Linda Kirk

This cooperative extension bulletin provides basic information about credit cards and their use. It covers the following topics: types of credit cards (revolving credit, travel and entertainment, and debit); factors to consider when evaluating a credit card (interest rates, grace period, and annual membership fee); other credit card costs (late…

12 CFR 167.12 - Purchased credit card relationships, servicing assets, intangible assets (other than purchased...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card relationships and servicing assets), credit... Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card...

12 CFR 167.12 - Purchased credit card relationships, servicing assets, intangible assets (other than purchased...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 1 2013-01-01 2013-01-01 false Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card relationships and servicing assets), credit... Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card...

12 CFR 567.12 - Purchased credit card relationships, servicing assets, intangible assets (other than purchased...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 6 2013-01-01 2012-01-01 true Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card relationships and servicing assets), credit... credit card relationships, servicing assets, intangible assets (other than purchased credit card...

12 CFR 167.12 - Purchased credit card relationships, servicing assets, intangible assets (other than purchased...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 1 2012-01-01 2012-01-01 false Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card relationships and servicing assets), credit... Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card...

12 CFR 567.12 - Purchased credit card relationships, servicing assets, intangible assets (other than purchased...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 6 2012-01-01 2012-01-01 false Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card relationships and servicing assets), credit... credit card relationships, servicing assets, intangible assets (other than purchased credit card...

78 FR 59096 - Agency Information Collection Activities: Information Collection Renewal; Comment Request...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-25

... savings associations). The OCC requires independent credit card banks and independent credit card Federal... by the bank or Federal savings association. Independent credit card banks and independent credit card... credit card operations and are not affiliated with a full service national bank or Federal savings...

12 CFR 567.12 - Purchased credit card relationships, servicing assets, intangible assets (other than purchased...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 6 2014-01-01 2012-01-01 true Purchased credit card relationships, servicing assets, intangible assets (other than purchased credit card relationships and servicing assets), credit... credit card relationships, servicing assets, intangible assets (other than purchased credit card...

Nuclear Wallet Cards

Science.gov Websites

Index Nuclear Wallet Cards Contents Current Version Radioactive Nuclides (Homeland Security) Nuclear Materials Management & Safeguards System 8th Edition 2011 Nuclear Wallet Cards Resources Search Nuclear Wallet Cards 8th Edition PDF Format 8thEdition, Android Market Download Nuclear Wallet Cards Nuclear

Evolution of optically nondestructive and data-non-intrusive credit card verifiers

NASA Astrophysics Data System (ADS)

Sumriddetchkajorn, Sarun; Intaravanne, Yuttana

2010-04-01

Since the deployment of the credit card, the number of credit card fraud cases has grown rapidly with a huge amount of loss in millions of US dollars. Instead of asking more information from the credit card's holder or taking risk through payment approval, a nondestructive and data-non-intrusive credit card verifier is highly desirable before transaction begins. In this paper, we review optical techniques that have been proposed and invented in order to make the genuine credit card more distinguishable than the counterfeit credit card. Several optical approaches for the implementation of credit card verifiers are also included. In particular, we highlight our invention on a hyperspectral-imaging based portable credit card verifier structure that offers a very low false error rate of 0.79%. Other key features include low cost, simplicity in design and implementation, no moving part, no need of an additional decoding key, and adaptive learning.

Three dimensional identification card and applications

NASA Astrophysics Data System (ADS)

Zhou, Changhe; Wang, Shaoqing; Li, Chao; Li, Hao; Liu, Zhao

2016-10-01

Three dimensional Identification Card, with its three-dimensional personal image displayed and stored for personal identification, is supposed be the advanced version of the present two-dimensional identification card in the future [1]. Three dimensional Identification Card means that there are three-dimensional optical techniques are used, the personal image on ID card is displayed to be three-dimensional, so we can see three dimensional personal face. The ID card also stores the three-dimensional face information in its inside electronics chip, which might be recorded by using two-channel cameras, and it can be displayed in computer as three-dimensional images for personal identification. Three-dimensional ID card might be one interesting direction to update the present two-dimensional card in the future. Three-dimension ID card might be widely used in airport custom, entrance of hotel, school, university, as passport for on-line banking, registration of on-line game, etc...

Design and implementation of a smart card based healthcare information system.

PubMed

Kardas, Geylani; Tunali, E Turhan

2006-01-01

Smart cards are used in information technologies as portable integrated devices with data storage and data processing capabilities. As in other fields, smart card use in health systems became popular due to their increased capacity and performance. Their efficient use with easy and fast data access facilities leads to implementation particularly widespread in security systems. In this paper, a smart card based healthcare information system is developed. The system uses smart card for personal identification and transfer of health data and provides data communication via a distributed protocol which is particularly developed for this study. Two smart card software modules are implemented that run on patient and healthcare professional smart cards, respectively. In addition to personal information, general health information about the patient is also loaded to patient smart card. Health care providers use their own smart cards to be authenticated on the system and to access data on patient cards. Encryption keys and digital signature keys stored on smart cards of the system are used for secure and authenticated data communication between clients and database servers over distributed object protocol. System is developed on Java platform by using object oriented architecture and design patterns.

The caspase-1 inhibitor CARD18 is specifically expressed during late differentiation of keratinocytes and its expression is lost in lichen planus.

PubMed

Qin, Haihong; Jin, Jiang; Fischer, Heinz; Mildner, Michael; Gschwandtner, Maria; Mlitz, Veronika; Eckhart, Leopold; Tschachler, Erwin

2017-08-01

CARD18 contains a caspase recruitment domain (CARD) via which it binds to caspase-1 and thereby inhibits caspase-1-mediated activation of the pro-inflammatory cytokine interleukin (IL)-1β. To determine the expression profile and the role of CARD18 during differentiation of keratinocytes and to compare the expression of CARD18 in normal skin and in inflammatory skin diseases. Human keratinocytes were induced to differentiate in monolayer and in 3D skin equivalent cultures. In some experiments, CARD18-specific siRNAs were used to knock down expression of CARD18. CARD18 mRNA levels were determined by quantitative real-time PCR, and CARD18 protein was detected by Western blot and immunofluorescence analyses. In situ expression was analyzed in skin biopsies obtained from healthy donors and patients with psoriasis and lichen planus. CARD18 mRNA was expressed in the epidermis at more than 100-fold higher levels than in any other human tissue. Within the epidermis, CARD18 was specifically expressed in the granular layer. In vitro CARD18 was strongly upregulated at both mRNA and protein levels in keratinocytes undergoing terminal differentiation. In skin equivalent cultures the expression of CARD18 was efficiently suppressed by siRNAs without impairing stratum corneum formation. Epidermal expression of CARD18 was increased after ultraviolet (UV)B irradiation of skin explants. In skin biopsies of patients with psoriasis no consistent regulation of CARD18 expression was observed, however, in lesional epidermis of patients with lichen planus, CARD18 expression was either greatly diminished or entirely absent whereas in non-lesional areas expression was comparable to normal skin. Our results identify CARD18 as a differentiation-associated keratinocyte protein that is altered in abundance by UV stress. Its downregulation in lichen planus indicates a potential role in inflammatory reactions of the epidermis in this disease. Copyright © 2017 Japanese Society for Investigative Dermatology. Published by Elsevier B.V. All rights reserved.

12 CFR 226.12 - Special credit card provisions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Special credit card provisions. 226.12 Section... SYSTEM TRUTH IN LENDING (REGULATION Z) Open-End Credit § 226.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used, including...

37 CFR 1.23 - Methods of payment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... made by credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process... authorization to charge fees to a credit card. If credit card information is provided on a form or document...

12 CFR 226.12 - Special credit card provisions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 3 2013-01-01 2013-01-01 false Special credit card provisions. 226.12 Section... SYSTEM (CONTINUED) TRUTH IN LENDING (REGULATION Z) Open-End Credit § 226.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used...

37 CFR 1.23 - Methods of payment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... made by credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process... authorization to charge fees to a credit card. If credit card information is provided on a form or document...

12 CFR 1026.12 - Special credit card provisions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 8 2012-01-01 2012-01-01 false Special credit card provisions. 1026.12 Section...-End Credit § 1026.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used, including business, commercial, or agricultural use, no...

37 CFR 1.23 - Methods of payment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... made by credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process... authorization to charge fees to a credit card. If credit card information is provided on a form or document...

12 CFR Rules for Card Issuers That... - by-Transaction Basis

Code of Federal Regulations, 2011 CFR

2011-01-01

... THE FEDERAL RESERVE SYSTEM TRUTH IN LENDING (REGULATION Z) Special Rules Applicable to Credit Card... Subpart B apply if credit cards are issued and the card issuer and the seller are the same or related... creditor have an agreement authorizing the seller to honor the creditor's credit card. 1. Section 226.6(a...

12 CFR 1026.12 - Special credit card provisions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 9 2014-01-01 2014-01-01 false Special credit card provisions. 1026.12 Section...-End Credit § 1026.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used, including business, commercial, or agricultural use, no...

12 CFR Rules for Card Issuers That... - by-Transaction Basis

Code of Federal Regulations, 2012 CFR

2012-01-01

... THE FEDERAL RESERVE SYSTEM TRUTH IN LENDING (REGULATION Z) Special Rules Applicable to Credit Card... Subpart B apply if credit cards are issued and the card issuer and the seller are the same or related... creditor have an agreement authorizing the seller to honor the creditor's credit card. 1. Section 226.6(a...

12 CFR 226.12 - Special credit card provisions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 3 2011-01-01 2011-01-01 false Special credit card provisions. 226.12 Section... SYSTEM TRUTH IN LENDING (REGULATION Z) Open-End Credit § 226.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used, including...

12 CFR 226.12 - Special credit card provisions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 3 2014-01-01 2014-01-01 false Special credit card provisions. 226.12 Section... SYSTEM (CONTINUED) TRUTH IN LENDING (REGULATION Z) Open-End Credit § 226.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used...

12 CFR 226.12 - Special credit card provisions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 3 2012-01-01 2012-01-01 false Special credit card provisions. 226.12 Section... SYSTEM TRUTH IN LENDING (REGULATION Z) Open-End Credit § 226.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used, including...

37 CFR 1.23 - Methods of payment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... made by credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process... authorization to charge fees to a credit card. If credit card information is provided on a form or document...

12 CFR 1026.12 - Special credit card provisions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 8 2013-01-01 2013-01-01 false Special credit card provisions. 1026.12 Section...-End Credit § 1026.12 Special credit card provisions. (a) Issuance of credit cards. Regardless of the purpose for which a credit card is to be used, including business, commercial, or agricultural use, no...

22 CFR 41.32 - Nonresident alien Mexican border crossing identification cards; combined border crossing...

Code of Federal Regulations, 2014 CFR

2014-04-01

... identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. 41.32 Section 41.32 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE... crossing identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. (a...

22 CFR 41.32 - Nonresident alien Mexican border crossing identification cards; combined border crossing...

Code of Federal Regulations, 2010 CFR

2010-04-01

... identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. 41.32 Section 41.32 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE... crossing identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. (a...

22 CFR 41.32 - Nonresident alien Mexican border crossing identification cards; combined border crossing...

Code of Federal Regulations, 2013 CFR

2013-04-01

... identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. 41.32 Section 41.32 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE... crossing identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. (a...

22 CFR 41.32 - Nonresident alien Mexican border crossing identification cards; combined border crossing...

Code of Federal Regulations, 2011 CFR

2011-04-01

... identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. 41.32 Section 41.32 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE... crossing identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. (a...

22 CFR 41.32 - Nonresident alien Mexican border crossing identification cards; combined border crossing...

Code of Federal Regulations, 2012 CFR

2012-04-01

... identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. 41.32 Section 41.32 Foreign Relations DEPARTMENT OF STATE VISAS VISAS: DOCUMENTATION OF NONIMMIGRANTS UNDER THE... crossing identification cards; combined border crossing identification cards and B-1/B-2 visitor visas. (a...

Small-molecule inhibitors directly target CARD9 and mimic its protective variant in inflammatory bowel disease.

PubMed

Leshchiner, Elizaveta S; Rush, Jason S; Durney, Michael A; Cao, Zhifang; Dančík, Vlado; Chittick, Benjamin; Wu, Huixian; Petrone, Adam; Bittker, Joshua A; Phillips, Andrew; Perez, Jose R; Shamji, Alykhan F; Kaushik, Virendar K; Daly, Mark J; Graham, Daniel B; Schreiber, Stuart L; Xavier, Ramnik J

2017-10-24

Advances in human genetics have dramatically expanded our understanding of complex heritable diseases. Genome-wide association studies have identified an allelic series of CARD9 variants associated with increased risk of or protection from inflammatory bowel disease (IBD). The predisposing variant of CARD9 is associated with increased NF-κB-mediated cytokine production. Conversely, the protective variant lacks a functional C-terminal domain and is unable to recruit the E3 ubiquitin ligase TRIM62. Here, we used biochemical insights into CARD9 variant proteins to create a blueprint for IBD therapeutics and recapitulated the mechanism of the CARD9 protective variant using small molecules. We developed a multiplexed bead-based technology to screen compounds for disruption of the CARD9-TRIM62 interaction. We identified compounds that directly and selectively bind CARD9, disrupt TRIM62 recruitment, inhibit TRIM62-mediated ubiquitinylation of CARD9, and demonstrate cellular activity and selectivity in CARD9-dependent pathways. Taken together, small molecules targeting CARD9 illustrate a path toward improved IBD therapeutics. Published under the PNAS license.

Rational confederation of genes and diseases: NGS interpretation via GeneCards, MalaCards and VarElect.

PubMed

Rappaport, Noa; Fishilevich, Simon; Nudel, Ron; Twik, Michal; Belinky, Frida; Plaschkes, Inbar; Stein, Tsippi Iny; Cohen, Dana; Oz-Levi, Danit; Safran, Marilyn; Lancet, Doron

2017-08-18

A key challenge in the realm of human disease research is next generation sequencing (NGS) interpretation, whereby identified filtered variant-harboring genes are associated with a patient's disease phenotypes. This necessitates bioinformatics tools linked to comprehensive knowledgebases. The GeneCards suite databases, which include GeneCards (human genes), MalaCards (human diseases) and PathCards (human pathways) together with additional tools, are presented with the focus on MalaCards utility for NGS interpretation as well as for large scale bioinformatic analyses. VarElect, our NGS interpretation tool, leverages the broad information in the GeneCards suite databases. MalaCards algorithms unify disease-related terms and annotations from 69 sources. Further, MalaCards defines hierarchical relatedness-aliases, disease families, a related diseases network, categories and ontological classifications. GeneCards and MalaCards delineate and share a multi-tiered, scored gene-disease network, with stringency levels, including the definition of elite status-high quality gene-disease pairs, coming from manually curated trustworthy sources, that includes 4500 genes for 8000 diseases. This unique resource is key to NGS interpretation by VarElect. VarElect, a comprehensive search tool that helps infer both direct and indirect links between genes and user-supplied disease/phenotype terms, is robustly strengthened by the information found in MalaCards. The indirect mode benefits from GeneCards' diverse gene-to-gene relationships, including SuperPaths-integrated biological pathways from 12 information sources. We are currently adding an important information layer in the form of "disease SuperPaths", generated from the gene-disease matrix by an algorithm similar to that previously employed for biological pathway unification. This allows the discovery of novel gene-disease and disease-disease relationships. The advent of whole genome sequencing necessitates capacities to go beyond protein coding genes. GeneCards is highly useful in this respect, as it also addresses 101,976 non-protein-coding RNA genes. In a more recent development, we are currently adding an inclusive map of regulatory elements and their inferred target genes, generated by integration from 4 resources. MalaCards provides a rich big-data scaffold for in silico biomedical discovery within the gene-disease universe. VarElect, which depends significantly on both GeneCards and MalaCards power, is a potent tool for supporting the interpretation of wet-lab experiments, notably NGS analyses of disease. The GeneCards suite has thus transcended its 2-decade role in biomedical research, maturing into a key player in clinical investigation.

Effect of impurities and processing on silicon solar cells. Volume 1: Characterization methods for impurities in silicon and impurity effects data base

NASA Technical Reports Server (NTRS)

Hopkins, R. H.; Davis, J. R.; Rohatgi, A.; Campbell, R. B.; Blais, P. D.; Rai-Choudhury, P.; Stapleton, R. E.; Mollenkopf, H. C.; Mccormick, J. R.

1980-01-01

Two major topics are treated: methods to measure and evaluate impurity effects in silicon and comprehensive tabulations of data derived during the study. Discussions of deep level spectroscopy, detailed dark I-V measurements, recombination lifetime determination, scanned laser photo-response, conventional solar cell I-V techniques, and descriptions of silicon chemical analysis are presented and discussed. The tabulated data include lists of impurity segregation coefficients, ingot impurity analyses and estimated concentrations, typical deep level impurity spectra, photoconductive and open circuit decay lifetimes for individual metal-doped ingots, and a complete tabulation of the cell I-V characteristics of nearly 200 ingots.

Sex of respondent and credit attitudes as predictors of credit card use and debt payment.

PubMed

McCall, Michael; Eckrich, Donald W

2006-06-01

Researchers have suggested there may be sex differences in attitudes towards credit card possession and use. Undergraduates, 41 men and 41 women, completed a survey regarding their attitudes towards credit, credit card use, and repayment. Analysis indicated sex played a significant moderating role between number of credit cards used and the importance of paying off monthly balances. Women possessed more credit cards than men and engaged in more frequent shopping. Number of credit cards increased with paying off of monthly balances. Data are discussed in terms of the importance of managing credit card debt in an increasingly cashless society.

NACA Computer Operates an IBM Telereader

NASA Image and Video Library

1952-02-21

A staff member from the Computing Section at the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory operates an International Business Machines (IBM) telereader at the 8- by 6-Foot Supersonic Wind Tunnel. The telereader was used to measure recorded data from motion picture film or oscillographs. The machine could perform 50 measurements per minute. The component to her right is a telerecordex that was used convert the telereader measurements into decimal form and record the data on computer punch cards. During test runs in the 8- by 6-foot tunnel, or the other large test facilities, pressure sensors on the test article were connected to mercury-filled manometer tubes located below the test section. The mercury would rise or fall in relation to the pressure fluctuations in the test section. Initially, female staff members, known as “computers,” transcribed all the measurements by hand. The process became automated with the introduction of the telereader and other data reduction equipment in the early 1950s. The Computer Section staff members were still needed to operate the machines. The Computing Section was introduced during World War II to relieve short-handed research engineers of some of the tedious work. The computers made the initial computations and plotted the data graphically. The researcher then analyzed the data and either summarized the findings in a report or made modifications or ran the test again. The computers and analysts were located in the Altitude Wind Tunnel Shop and Office Building office wing during the 1940s. They were transferred to the new facility when the 8- by 6-Foot tunnel began operations in 1948.

Victorian era esthetic and restorative dentistry: an advertising trade card gallery.

PubMed

Croll, Theodore P; Swanson, Ben Z

2006-01-01

A chief means of print advertising in the Victorian era was the "trade card." Innumerable products, companies, and services were highlighted on colorful chromolithographic trade cards, and these became desirable collectible objects which were pasted into scrapbooks and enjoyed by many families. Dentistry- and oral health-related subjects were often depicted on Victorian trade cards, and esthetic and restorative dentistry themes were featured. This review describes the history of advertising trade cards and offers a photographic gallery of dentistry-related cards of the era.

In vitro evaluation of marginal discrepancy of monolithic zirconia restorations fabricated with different CAD-CAM systems.

PubMed

Hamza, Tamer A; Sherif, Rana M

2017-06-01

Dental laboratories use different computer-aided design and computer-aided manufacturing (CAD-CAM) systems to fabricate fixed prostheses; however, limited evidence is available concerning which system provides the best marginal discrepancy. The purpose of this in vitro study was to evaluate the marginal fit of 5 different monolithic zirconia restorations milled with different CAD-CAM systems. Thirty monolithic zirconia crowns were fabricated on a custom-designed stainless steel die and were divided into 5 groups according to the type of monolithic zirconia crown and the CAD-CAM system used: group TZ, milled with an MCXL milling machine; group CZ, translucent zirconia milled with a motion milling machine; group ZZ, zirconia milled with a dental milling unit; group PZ, translucent zirconia milled with a zirconia milling unit; and group BZ, solid zirconia milled using an S1 VHF milling machine. The marginal fit was measured with a binocular microscope at an original magnification of ×100. The results were tabulated and statistically analyzed with 1-way ANOVA and post hoc surface range test, and pairwise multiple comparisons were made using Bonferroni correction (α=.05). The type of CAD-CAM used affected the marginal fit of the monolithic restoration. The mean (±SD) highest marginal discrepancy was recorded in group TZI at 39.3 ±2.3 μm, while the least mean marginal discrepancy was recorded in group IZ (22.8 ±8.9 μm). The Bonferroni post hoc test showed that group TZI was significantly different from all other groups tested (P<.05). Within the limitation of this in vitro study, all tested CAD-CAM systems produced monolithic zirconia restorations with clinically acceptable marginal discrepancies; however, the CAD-CAM system with the 5-axis milling unit produced the best marginal fit. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

The impact of didactic read-aloud action cards on the performance of cannula cricothyroidotomy in a simulated 'can't intubate can't oxygenate' scenario.

PubMed

Harvey, R; Foulds, L; Housden, T; Bennett, K A; Falzon, D; McNarry, A F; Graham, C

2017-03-01

Significant benefits have been demonstrated with the use of peri-operative checklists. We assessed whether a read-aloud didactic action card would improve performance of cannula cricothyroidotomy in a simulated 'can't intubate, can't oxygenate' scenario. A 17-step action card was devised by an expert panel. Participants in their first 4 years of anaesthetic training were randomly assigned into 'no-card' or 'card' groups. Scenarios were video-recorded for analysis. Fifty-three participants (27 no-card and 26 card) completed the scenario. The number of steps omitted was mean (SD) 6.7 (2.0) in the no-card group vs. 0.3 (0.5); p < 0.001 in the card group, but the no-card group was faster to oxygenation by mean (95% CI) 35.4 (6.6-64.2) s. The Kappa statistic was 0.84 (0.73-0.95). Our study demonstrated that action cards are beneficial in achieving successful front-of-neck access using a cannula cricothyroidotomy technique. Further investigation is required to determine this tool's effectiveness in other front-of-neck access situations, and its role in teaching or clinical management. © 2016 The Association of Anaesthetists of Great Britain and Ireland.

Personal medical information system using laser card

NASA Astrophysics Data System (ADS)

Cho, Seong H.; Kim, Keun Ho; Choi, Hyung-Sik; Park, Hyun Wook

1996-04-01

The well-known hospital information system (HIS) and the picture archiving and communication system (PACS) are typical applications of multimedia to medical area. This paper proposes a personal medical information save-and-carry system using a laser card. This laser card is very useful, especially in emergency situations, because the medical information in the laser card can be read at anytime and anywhere if there exists a laser card reader/writer. The contents of the laser card include the clinical histories of a patient such as clinical chart, exam result, diagnostic reports, images, and so on. The purpose of this system is not a primary diagnosis, but emergency reference of clinical history of the patient. This personal medical information system consists of a personal computer integrated with laser card reader/writer, color frame grabber, color CCD camera and a high resolution image scanner optionally. Window-based graphical user interface was designed for easy use. The laser card has relatively sufficient capacity to store the personal medical information, and has fast access speed to restore and load the data with a portable size as compact as a credit card. Database items of laser card provide the doctors with medical data such as laser card information, patient information, clinical information, and diagnostic result information.

40 CFR 146.34 - Information to be considered by the Director.

Code of Federal Regulations, 2010 CFR

2010-07-01

... injected; (ii) Average and maximum injection pressure; and (iii) Qualitative analysis and ranges in..., cross sections, tabulations of wells within the area of review, and other data may be included in the... this map. (3) A tabulation of data reasonably available from public records or otherwise known to the...

12 CFR 334.91 - Duties of card issuers regarding changes of address.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STATEMENTS OF GENERAL POLICY FAIR CREDIT REPORTING Identity Theft Red Flags § 334.91 Duties of card issuers regarding changes of address. (a) Scope. This section applies to an issuer of a debit or credit card (card... been issued a credit or debit card. (2) Clear and conspicuous means reasonably understandable and...

12 CFR 41.91 - Duties of card issuers regarding changes of address.

Code of Federal Regulations, 2010 CFR

2010-01-01

... FAIR CREDIT REPORTING Identity Theft Red Flags § 41.91 Duties of card issuers regarding changes of address. (a) Scope. This section applies to an issuer of a debit or credit card (card issuer) that is a... means a consumer who has been issued a credit or debit card. (2) Clear and conspicuous means reasonably...

31 CFR 548.409 - Credit extended and cards issued by U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... SANCTIONS REGULATIONS Interpretations § 548.409 Credit extended and cards issued by U.S. financial..., charge cards, debit cards, or other credit facilities issued by a U.S. financial institution to a person...

41 CFR 109-38.801 - Obtaining SF 149, U.S. Government National Credit Card.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... Government National Credit Card. 109-38.801 Section 109-38.801 Public Contracts and Property Management..., U.S. Government National Credit Card § 109-38.801 Obtaining SF 149, U.S. Government National Credit Card. DOE offices electing to use national credit cards shall request the assignment of billing address...

31 CFR 588.409 - Credit extended and cards issued by U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... BALKANS STABILIZATION REGULATIONS Interpretations § 588.409 Credit extended and cards issued by U.S... not limited to, charge cards, debit cards, or other credit facilities issued by a U.S. financial...

31 CFR 598.409 - Credit extended and cards issued by U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... NARCOTICS KINGPIN SANCTIONS REGULATIONS Interpretations § 598.409 Credit extended and cards issued by U.S... existing credit agreements, including, but not limited to, charge cards, debit cards, or other credit...

31 CFR 593.409 - Credit extended and cards issued by U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... LIBERIAN REGIME OF CHARLES TAYLOR SANCTIONS REGULATIONS Interpretations § 593.409 Credit extended and cards..., including, but not limited to, charge cards, debit cards, or other credit facilities issued by a U.S...

37 CFR 2.207 - Methods of payment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process the charge... fees to a credit card. If credit card information is provided on a form or document other than a form...

12 CFR 717.91 - Duties of card issuers regarding changes of address.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AFFECTING CREDIT UNIONS FAIR CREDIT REPORTING Identity Theft Red Flags § 717.91 Duties of card issuers regarding changes of address. (a) Scope. This section applies to an issuer of a debit or credit card (card... means a member who has been issued a credit or debit card. (2) Clear and conspicuous means reasonably...

31 CFR 594.410 - Credit extended and cards issued by U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... TERRORISM SANCTIONS REGULATIONS Interpretations § 594.410 Credit extended and cards issued by U.S. financial... agreements, including, but not limited to, charge cards, debit cards, or other credit facilities issued by a...

31 CFR 542.409 - Credit extended and cards issued by U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... SANCTIONS REGULATIONS Interpretations § 542.409 Credit extended and cards issued by U.S. financial..., charge cards, debit cards, or other credit facilities issued by a U.S. financial institution to a person...

12 CFR 571.91 - Duties of card issuers regarding changes of address.

Code of Federal Regulations, 2010 CFR

2010-01-01

... FAIR CREDIT REPORTING Identity Theft Red Flags § 571.91 Duties of card issuers regarding changes of address. (a) Scope. This section applies to an issuer of a debit or credit card (card issuer) that is a... consumer who has been issued a credit or debit card. (2) Clear and conspicuous means reasonably...

31 CFR 547.409 - Credit extended and cards issued by U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... DEMOCRATIC REPUBLIC OF THE CONGO SANCTIONS REGULATIONS Interpretations § 547.409 Credit extended and cards..., including, but not limited to, charge cards, debit cards, or other credit facilities issued by a U.S...

31 CFR 536.409 - Credit extended and cards issued by U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... NARCOTICS TRAFFICKING SANCTIONS REGULATIONS Interpretations § 536.409 Credit extended and cards issued by U... any existing credit agreements, including, but not limited to, charge cards, debit cards, or other...

The "Negative" Credit Card Effect: Credit Cards as Spending-Limiting Stimuli in New Zealand

ERIC Educational Resources Information Center

Lie, Celia; Hunt, Maree; Peters, Heather L.; Veliu, Bahrie; Harper, David

2010-01-01

The "credit card effect" describes a finding where greater value is given to consumer items if credit card logos are present. One explanation for the effect is that credit cards elicit spending behavior through associative learning. If this is true, social, economic and historical contexts should alter this effect. In Experiment 1, Year…

Vibration Damping Circuit Card Assembly

NASA Technical Reports Server (NTRS)

Hunt, Ronald Allen (Inventor)

2016-01-01

A vibration damping circuit card assembly includes a populated circuit card having a mass M. A closed metal container is coupled to a surface of the populated circuit card at approximately a geometric center of the populated circuit card. Tungsten balls fill approximately 90% of the metal container with a collective mass of the tungsten balls being approximately (0.07) M.

37 CFR 2.207 - Methods of payment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process the charge... fees to a credit card. If credit card information is provided on a form or document other than a form...

41 CFR 109-38.801 - Obtaining SF 149, U.S. Government National Credit Card.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... Government National Credit Card. 109-38.801 Section 109-38.801 Public Contracts and Property Management..., U.S. Government National Credit Card § 109-38.801 Obtaining SF 149, U.S. Government National Credit Card. DOE offices electing to use national credit cards shall request the assignment of billing address...

41 CFR 109-38.801 - Obtaining SF 149, U.S. Government National Credit Card.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... Government National Credit Card. 109-38.801 Section 109-38.801 Public Contracts and Property Management..., U.S. Government National Credit Card § 109-38.801 Obtaining SF 149, U.S. Government National Credit Card. DOE offices electing to use national credit cards shall request the assignment of billing address...

41 CFR 109-38.801 - Obtaining SF 149, U.S. Government National Credit Card.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Government National Credit Card. 109-38.801 Section 109-38.801 Public Contracts and Property Management..., U.S. Government National Credit Card § 109-38.801 Obtaining SF 149, U.S. Government National Credit Card. DOE offices electing to use national credit cards shall request the assignment of billing address...

12 CFR Rules for Card Issuers That... - by-Transaction Basis

Code of Federal Regulations, 2013 CFR

2013-01-01

... Credit Card Accounts and Open-End Credit Offered to College Students Reevaluation of rate increases. Pt... provisions of Subpart B apply if credit cards are issued and the card issuer and the seller are the same or... creditor have an agreement authorizing the seller to honor the creditor's credit card. 1. Section 226.6(a...

41 CFR 109-38.801 - Obtaining SF 149, U.S. Government National Credit Card.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... Government National Credit Card. 109-38.801 Section 109-38.801 Public Contracts and Property Management..., U.S. Government National Credit Card § 109-38.801 Obtaining SF 149, U.S. Government National Credit Card. DOE offices electing to use national credit cards shall request the assignment of billing address...

37 CFR 2.207 - Methods of payment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process the charge... fees to a credit card. If credit card information is provided on a form or document other than a form...

37 CFR 2.207 - Methods of payment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... credit card, except for replenishing a deposit account. Payment of a fee by credit card must specify the amount to be charged to the credit card and such other information as is necessary to process the charge... fees to a credit card. If credit card information is provided on a form or document other than a form...

CARD9-Dependent Neutrophil Recruitment Protects against Fungal Invasion of the Central Nervous System

PubMed Central

Swamydas, Muthulekha; Rodriguez, Carlos A.; Lim, Jean K.; Mendez, Laura M.; Fink, Danielle L.; Hsu, Amy P.; Zhai, Bing; Karauzum, Hatice; Mikelis, Constantinos M.; Rose, Stacey R.; Ferre, Elise M. N.; Yockey, Lynne; Lemberg, Kimberly; Kuehn, Hye Sun; Rosenzweig, Sergio D.; Lin, Xin; Chittiboina, Prashant; Datta, Sandip K.; Belhorn, Thomas H.; Weimer, Eric T.; Hernandez, Michelle L.; Hohl, Tobias M.; Kuhns, Douglas B.; Lionakis, Michail S.

2015-01-01

Candida is the most common human fungal pathogen and causes systemic infections that require neutrophils for effective host defense. Humans deficient in the C-type lectin pathway adaptor protein CARD9 develop spontaneous fungal disease that targets the central nervous system (CNS). However, how CARD9 promotes protective antifungal immunity in the CNS remains unclear. Here, we show that a patient with CARD9 deficiency had impaired neutrophil accumulation and induction of neutrophil-recruiting CXC chemokines in the cerebrospinal fluid despite uncontrolled CNS Candida infection. We phenocopied the human susceptibility in Card9 -/- mice, which develop uncontrolled brain candidiasis with diminished neutrophil accumulation. The induction of neutrophil-recruiting CXC chemokines is significantly impaired in infected Card9 -/- brains, from both myeloid and resident glial cellular sources, whereas cell-intrinsic neutrophil chemotaxis is Card9-independent. Taken together, our data highlight the critical role of CARD9-dependent neutrophil trafficking into the CNS and provide novel insight into the CNS fungal susceptibility of CARD9-deficient humans. PMID:26679537

Tabulate Corals after the Frasnian/Famennian Crisis: A Unique Fauna from the Holy Cross Mountains, Poland

PubMed Central

Zapalski, Mikołaj K.; Berkowski, Błażej; Wrzołek, Tomasz

2016-01-01

Famennian tabulate corals were very rare worldwide, and their biodiversity was relatively low. Here we report a unique tabulate fauna from the mid- and late Famennian of the western part of the Holy Cross Mountains (Kowala and Ostrówka), Poland. We describe eight species (four of them new, namely ?Michelinia vinni sp. nov., Thamnoptychia mistiaeni sp. nov., Syringopora kowalensis sp. nov. and Syringopora hilarowiczi sp. nov.); the whole fauna consists of ten species (two others described in previous papers). These corals form two assemblages—the lower, mid-Famennian with Thamnoptychia and the upper, late Famennian with representatives of genera ?Michelinia, Favosites, Syringopora and ?Yavorskia. The Famennian tabulates from Kowala represent the richest Famennian assemblage appearing after the F/F crisis (these faunas appear some 10 Ma after the extinction event). Corals described here most probably inhabited deeper water settings, near the limit between euphotic and disphotic zones or slightly above. At generic level, these faunas show similarities to other Devonian and Carboniferous faunas, which might suggest their ancestry to at least several Carboniferous lineages. Tabulate faunas described here represent new recruits (the basin of the Holy Cross mountains was not a refuge during the F/F crisis) and have no direct evolutionary linkage to Frasnian faunas from Kowala. The colonization of the seafloor took place in two separate steps: first was monospecific assemblage of Thamnoptychia, and later came the diversified Favosites-Syringopora-Michelinia fauna. PMID:27007689

Large eddy simulation of turbulent premixed combustion using tabulated detailed chemistry and presumed probability density function

NASA Astrophysics Data System (ADS)

Zhang, Hongda; Han, Chao; Ye, Taohong; Ren, Zhuyin

2016-03-01

A method of chemistry tabulation combined with presumed probability density function (PDF) is applied to simulate piloted premixed jet burner flames with high Karlovitz number using large eddy simulation. Thermo-chemistry states are tabulated by the combination of auto-ignition and extended auto-ignition model. To evaluate the predictive capability of the proposed tabulation method to represent the thermo-chemistry states under the condition of different fresh gases temperature, a-priori study is conducted by performing idealised transient one-dimensional premixed flame simulations. Presumed PDF is used to involve the interaction of turbulence and flame with beta PDF to model the reaction progress variable distribution. Two presumed PDF models, Dirichlet distribution and independent beta distribution, respectively, are applied for representing the interaction between two mixture fractions that are associated with three inlet streams. Comparisons of statistical results show that two presumed PDF models for the two mixture fractions are both capable of predicting temperature and major species profiles, however, they are shown to have a significant effect on the predictions for intermediate species. An analysis of the thermo-chemical state-space representation of the sub-grid scale (SGS) combustion model is performed by comparing correlations between the carbon monoxide mass fraction and temperature. The SGS combustion model based on the proposed chemistry tabulation can reasonably capture the peak value and change trend of intermediate species. Aspects regarding model extensions to adequately predict the peak location of intermediate species are discussed.

Tabulate Corals after the Frasnian/Famennian Crisis: A Unique Fauna from the Holy Cross Mountains, Poland.

PubMed

Zapalski, Mikołaj K; Berkowski, Błażej; Wrzołek, Tomasz

2016-01-01

Famennian tabulate corals were very rare worldwide, and their biodiversity was relatively low. Here we report a unique tabulate fauna from the mid- and late Famennian of the western part of the Holy Cross Mountains (Kowala and Ostrówka), Poland. We describe eight species (four of them new, namely ?Michelinia vinni sp. nov., Thamnoptychia mistiaeni sp. nov., Syringopora kowalensis sp. nov. and Syringopora hilarowiczi sp. nov.); the whole fauna consists of ten species (two others described in previous papers). These corals form two assemblages-the lower, mid-Famennian with Thamnoptychia and the upper, late Famennian with representatives of genera ?Michelinia, Favosites, Syringopora and ?Yavorskia. The Famennian tabulates from Kowala represent the richest Famennian assemblage appearing after the F/F crisis (these faunas appear some 10 Ma after the extinction event). Corals described here most probably inhabited deeper water settings, near the limit between euphotic and disphotic zones or slightly above. At generic level, these faunas show similarities to other Devonian and Carboniferous faunas, which might suggest their ancestry to at least several Carboniferous lineages. Tabulate faunas described here represent new recruits (the basin of the Holy Cross mountains was not a refuge during the F/F crisis) and have no direct evolutionary linkage to Frasnian faunas from Kowala. The colonization of the seafloor took place in two separate steps: first was monospecific assemblage of Thamnoptychia, and later came the diversified Favosites-Syringopora-Michelinia fauna.

Print a Bed Bug Card

EPA Pesticide Factsheets

Two sets of business card-sized lists of tips for prevention of bed bug infestations, one for general use around home, the other for travelers. Print a single card or a page of cards for distribution.

International images: business cards.

PubMed

Gaston, S; Pucci, J

1991-01-01

Nursing specialists engage in a variety of international professional activities. Business cards are an important aspect of establishing a professional image. This article presents recommended business card contents, international etiquette, card design and production, and cared innovations.

British and American attitudes toward credit cards.

PubMed

Yang, Bijou; James, Simon; Lester, David

2006-04-01

American university students owned more than twice as many credit cards as British university students. However, scores on a credit card attitude scale predicted the number of cards owned by respondents in both countries.

The implementation of psychiatric advance directives: experiences from a Dutch crisis card initiative.

PubMed

van der Ham, Alida J; Voskes, Yolande; van Kempen, Nel; Broerse, Jacqueline E W; Widdershoven, Guy A M

2013-06-01

The crisis card is a specific form of psychiatric advance directive, documenting mental clients' treatment preferences in advance of a potential psychiatric crisis. In this paper, we aim to provide insight into implementation issues surrounding the crisis card. A Dutch crisis-card project formed the scope of this study. Data were collected through interviews with 15 participants from six stakeholder groups. Identified implementation issues are: (a) The role of the crisis-card counselor, (b) lack of distribution and familiarity, (c) care professionals' routines, and (d) client readiness. The crisis-card counselor appears to play a key role in fostering benefits of the crisis card by supporting clients' perspectives. More structural integration of the crisis card in care processes may enhance its impact, but should be carefully explored. (PsycINFO Database Record (c) 2013 APA, all rights reserved).

Jeu de cartes or Jeu Descartes: Business Cards in a French Course for the Professions.

ERIC Educational Resources Information Center

Gegerias, Mary

This paper discusses the use of French business cards in a college-level French language and culture course for professionals. Among other assignments, students were each given a different card and asked to speak about the design of their card, the business represented, idiomatic expressions and historical allusions on the card, and the use of…

31 CFR 543.409 - Credit extended and cards issued by U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U...'IVOIRE SANCTIONS REGULATIONS Interpretations § 543.409 Credit extended and cards issued by U.S. financial..., charge cards, debit cards, or other credit facilities issued by a U.S. financial institution to a person...

12 CFR 222.91 - Duties of card issuers regarding changes of address.

Code of Federal Regulations, 2010 CFR

2010-01-01

... described in § 222.90(a) that issues a debit or credit card (card issuer). (b) Definitions. For purposes of this section: (1) Cardholder means a consumer who has been issued a credit or debit card. (2) Clear and... notification of a change of address for a consumer's debit or credit card account and, within a short period of...

31 CFR 541.408 - Credit extended and cards issued by U.S. financial institutions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Credit extended and cards issued by U... ZIMBABWE SANCTIONS REGULATIONS Interpretations § 541.408 Credit extended and cards issued by U.S. financial..., charge cards, debit cards, or other credit facilities issued by a U.S. financial institution to a person...

16 CFR 681.2 - Duties of card issuers regarding changes of address.

Code of Federal Regulations, 2010 CFR

2010-01-01

... applies to a person described in § 681.1(a) that issues a debit or credit card (card issuer). (b... of address if it receives notification of a change of address for a consumer's debit or credit card... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Duties of card issuers regarding changes of...

49 CFR 375.221 - May I use a charge or credit card plan for payments?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false May I use a charge or credit card plan for... card plan for payments? (a) You may provide in your tariff for the acceptance of charge or credit cards for the payment of freight charges. Accepting charge or credit card payments is different than...

49 CFR 375.221 - May I use a charge or credit card plan for payments?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false May I use a charge or credit card plan for... card plan for payments? (a) You may provide in your tariff for the acceptance of charge or credit cards for the payment of freight charges. Accepting charge or credit card payments is different than...

49 CFR 375.221 - May I use a charge or credit card plan for payments?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 5 2012-10-01 2012-10-01 false May I use a charge or credit card plan for... card plan for payments? (a) You may provide in your tariff for the acceptance of charge or credit cards for the payment of freight charges. Accepting charge or credit card payments is different than...

49 CFR 375.221 - May I use a charge or credit card plan for payments?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false May I use a charge or credit card plan for... card plan for payments? (a) You may provide in your tariff for the acceptance of charge or credit cards for the payment of freight charges. Accepting charge or credit card payments is different than...

49 CFR 375.221 - May I use a charge or credit card plan for payments?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false May I use a charge or credit card plan for... card plan for payments? (a) You may provide in your tariff for the acceptance of charge or credit cards for the payment of freight charges. Accepting charge or credit card payments is different than...

Integrating Fingerprint Verification into the Smart Card-Based Healthcare Information System

NASA Astrophysics Data System (ADS)

Moon, Daesung; Chung, Yongwha; Pan, Sung Bum; Park, Jin-Won

2009-12-01

As VLSI technology has been improved, a smart card employing 32-bit processors has been released, and more personal information such as medical, financial data can be stored in the card. Thus, it becomes important to protect personal information stored in the card. Verification of the card holder's identity using a fingerprint has advantages over the present practices of Personal Identification Numbers (PINs) and passwords. However, the computational workload of fingerprint verification is much heavier than that of the typical PIN-based solution. In this paper, we consider three strategies to implement fingerprint verification in a smart card environment and how to distribute the modules of fingerprint verification between the smart card and the card reader. We first evaluate the number of instructions of each step of a typical fingerprint verification algorithm, and estimate the execution time of several cryptographic algorithms to guarantee the security/privacy of the fingerprint data transmitted in the smart card with the client-server environment. Based on the evaluation results, we analyze each scenario with respect to the security level and the real-time execution requirements in order to implement fingerprint verification in the smart card with the client-server environment.

MalaCards: an integrated compendium for diseases and their annotation

PubMed Central

Rappaport, Noa; Nativ, Noam; Stelzer, Gil; Twik, Michal; Guan-Golan, Yaron; Iny Stein, Tsippi; Bahir, Iris; Belinky, Frida; Morrey, C. Paul; Safran, Marilyn; Lancet, Doron

2013-01-01

Comprehensive disease classification, integration and annotation are crucial for biomedical discovery. At present, disease compilation is incomplete, heterogeneous and often lacking systematic inquiry mechanisms. We introduce MalaCards, an integrated database of human maladies and their annotations, modeled on the architecture and strategy of the GeneCards database of human genes. MalaCards mines and merges 44 data sources to generate a computerized card for each of 16 919 human diseases. Each MalaCard contains disease-specific prioritized annotations, as well as inter-disease connections, empowered by the GeneCards relational database, its searches and GeneDecks set analyses. First, we generate a disease list from 15 ranked sources, using disease-name unification heuristics. Next, we use four schemes to populate MalaCards sections: (i) directly interrogating disease resources, to establish integrated disease names, synonyms, summaries, drugs/therapeutics, clinical features, genetic tests and anatomical context; (ii) searching GeneCards for related publications, and for associated genes with corresponding relevance scores; (iii) analyzing disease-associated gene sets in GeneDecks to yield affiliated pathways, phenotypes, compounds and GO terms, sorted by a composite relevance score and presented with GeneCards links; and (iv) searching within MalaCards itself, e.g. for additional related diseases and anatomical context. The latter forms the basis for the construction of a disease network, based on shared MalaCards annotations, embodying associations based on etiology, clinical features and clinical conditions. This broadly disposed network has a power-law degree distribution, suggesting that this might be an inherent property of such networks. Work in progress includes hierarchical malady classification, ontological mapping and disease set analyses, striving to make MalaCards an even more effective tool for biomedical research. Database URL: http://www.malacards.org/ PMID:23584832

Factors Determining Availability, Utilization and Retention of Child Health Card in Western Nepal.

PubMed

Paudel, K P; Bajracharya, D C; Karki, K; K C, A

2016-05-01

The immunization card is revised with addition of general information about child health and is later called as child health card. This card is a tool used by Health Management Information System in Nepal. It is important for tracking the records of immunization. Aim is to identify the factors determining the availability, utilization and retention of the child health card in Western Nepal. A cross sectional study was conducted among mothers having children < 24 months old from Gorkha (Western Hill) and Nawalparasi (Western Terai) districts. The sample size for the study was 600 and systematic random sampling was used to select the mothers having less than 24 months old children. Data entry and analysis was done by using SPSS. Qualitative data was analyzed by making matrix. The average age of respondents was 24 years. The majority of respondents have gained higher level education. Retention of the card was found to be 82.2%. 90.3% retention was seen among 0-12 months children age group whereas it was 74 % among12 to 24 months age group. The reasons for less retention were torn by the child/played by child (54.6%) followed by lack of proper place,unaware about importance and poor quality of card.The new child health cards were insufficient, compelling use of both new and old cards which created problem in consistency. Regarding utilization of child health card, it was found to be used for birth registration and for further studies in abroad. The areas of utilization of child health card should be broadened so that the retention of card can be increased. The main reasons for less retention of the card are torn by children and lack of the proper place.

Earth Observations Division version of the Laboratory for Applications of Remote Sensing System (EOD-LARSYS) user guide for the IBM 370/148. Volume 2: User reference manual

NASA Technical Reports Server (NTRS)

Aucoin, P. J.; Stewart, J.; Mckay, M. F. (Principal Investigator)

1980-01-01

This document presents instructions for analysts who use the EOD-LARSYS as programmed on the Purdue University IBM 370/148 (recently replaced by the IBM 3031) computer. It presents sample applications, control cards, and error messages for all processors in the system and gives detailed descriptions of the mathematical procedures and information needed to execute the system and obtain the desired output. EOD-LARSYS is the JSC version of an integrated batch system for analysis of multispectral scanner imagery data. The data included is designed for use with the as built documentation (volume 3) and the program listings (volume 4). The system is operational from remote terminals at Johnson Space Center under the virtual machine/conversational monitor system environment.

A Novel Method for Characterization of Superconductors: Physical Measurements and Modeling of Thin Films

NASA Technical Reports Server (NTRS)

Kim, B. F.; Moorjani, K.; Phillips, T. E.; Adrian, F. J.; Bohandy, J.; Dolecek, Q. E.

1993-01-01

A method for characterization of granular superconducting thin films has been developed which encompasses both the morphological state of the sample and its fabrication process parameters. The broad scope of this technique is due to the synergism between experimental measurements and their interpretation using numerical simulation. Two novel technologies form the substance of this system: the magnetically modulated resistance method for characterizing superconductors; and a powerful new computer peripheral, the Parallel Information Processor card, which provides enhanced computing capability for PC computers. This enhancement allows PC computers to operate at speeds approaching that of supercomputers. This makes atomic scale simulations possible on low cost machines. The present development of this system involves the integration of these two technologies using mesoscale simulations of thin film growth. A future stage of development will incorporate atomic scale modeling.

High-density, fail-in-place switches for computer and data networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coteus, Paul W.; Doany, Fuad E.; Hall, Shawn A.

A structure for a network switch. The network switch may include a plurality of spine chips arranged on a plurality of spine cards, where one or more spine chips are located on each spine card; and a plurality of leaf chips arranged on a plurality of leaf cards, wherein one or more leaf chips are located on each leaf card, where each spine card is connected to every leaf chip and the plurality of spine chips are surrounded on at least two sides by leaf cards.

Health care report cards: what about consumers' perspectives?

PubMed

McGee, J; Knutson, D

1994-10-01

Though the report card style is seen by many as a way to create better-informed consumers, very little is actually known about how consumers will respond to health care report cards. Report cards are only one of many factors that influence health care decision making. Much consumer-oriented effort and fine-tuning will be required to make report cards effective. Using the approach called "social marketing" as a framework, specific examples are used to outline some ideas for more intensive pursuit of consumers' perspectives in the design and distribution of report cards.

NOD1CARD Might Be Using Multiple Interfaces for RIP2-Mediated CARD-CARD Interaction: Insights from Molecular Dynamics Simulation

PubMed Central

Pradhan, Sukanta Kumar; De, Sachinandan

2017-01-01

The nucleotide-binding and oligomerization domain (NOD)-containing protein 1 (NOD1) plays the pivotal role in host-pathogen interface of innate immunity and triggers immune signalling pathways for the maturation and release of pro-inflammatory cytokines. Upon the recognition of iE-DAP, NOD1 self-oligomerizes in an ATP-dependent fashion and interacts with adaptor molecule receptor-interacting protein 2 (RIP2) for the propagation of innate immune signalling and initiation of pro-inflammatory immune responses. This interaction (mediated by NOD1 and RIP2) helps in transmitting the downstream signals for the activation of NF-κB signalling pathway, and has been arbitrated by respective caspase-recruitment domains (CARDs). The so-called CARD-CARD interaction still remained contradictory due to inconsistent results. Henceforth, to understand the mode and the nature of the interaction, structural bioinformatics approaches were employed. MD simulation of modelled 1:1 heterodimeric complexes revealed that the type-Ia interface of NOD1CARD and the type-Ib interface of RIP2CARD might be the suitable interfaces for the said interaction. Moreover, we perceived three dynamically stable heterotrimeric complexes with an NOD1:RIP2 ratio of 1:2 (two numbers) and 2:1. Out of which, in the first trimeric complex, a type-I NOD1-RIP2 heterodimer was found interacting with an RIP2CARD using their type-IIa and IIIa interfaces. However, in the second and third heterotrimer, we observed type-I homodimers of NOD1 and RIP2 CARDs were interacting individually with RIP2CARD and NOD1CARD (in type-II and type-III interface), respectively. Overall, this study provides structural and dynamic insights into the NOD1-RIP2 oligomer formation, which will be crucial in understanding the molecular basis of NOD1-mediated CARD-CARD interaction in higher and lower eukaryotes. PMID:28114344

Helping Students Design HyperCard Stacks.

ERIC Educational Resources Information Center

Dunham, Ken

1995-01-01

Discusses how to teach students to design HyperCard stacks. Highlights include introducing HyperCard, developing storyboards, introducing design concepts and scripts, presenting stacks, evaluating storyboards, and continuing projects. A sidebar presents a HyperCard stack evaluation form. (AEF)

Thermal transfer structures coupling electronics card(s) to coolant-cooled structure(s)

DOEpatents

David, Milnes P; Graybill, David P; Iyengar, Madhusudan K; Kamath, Vinod; Kochuparambil, Bejoy J; Parida, Pritish R; Schmidt, Roger R

2014-12-16

Cooling apparatuses and coolant-cooled electronic systems are provided which include thermal transfer structures configured to engage with a spring force one or more electronics cards with docking of the electronics card(s) within a respective socket(s) of the electronic system. A thermal transfer structure of the cooling apparatus includes a thermal spreader having a first thermal conduction surface, and a thermally conductive spring assembly coupled to the conduction surface of the thermal spreader and positioned and configured to reside between and physically couple a first surface of an electronics card to the first surface of the thermal spreader with docking of the electronics card within a socket of the electronic system. The thermal transfer structure is, in one embodiment, metallurgically bonded to a coolant-cooled structure and facilitates transfer of heat from the electronics card to coolant flowing through the coolant-cooled structure.

Citizen's dosimeter

DOEpatents

Klemic, Gladys [Naperville, IL; Bailey, Paul [Chicago, IL; Breheny, Cecilia [Yonkers, NY

2008-09-02

The present invention relates to a citizen's dosimeter. More specifically, the invention relates to a small, portable, personal dosimetry device designed to be used in the wake of a event involving a Radiological Dispersal Device (RDD), Improvised Nuclear Device (IND), or other event resulting in the contamination of large area with radioactive material or where on site personal dosimetry is required. The card sized dosimeter generally comprises: a lower card layer, the lower card body having an inner and outer side; a upper card layer, the layer card having an inner and outer side; an optically stimulated luminescent material (OSLM), wherein the OSLM is sandwiched between the inner side of the lower card layer and the inner side of the upper card layer during dosimeter radiation recording, a shutter means for exposing at least one side of the OSLM for dosimeter readout; and an energy compensation filter attached to the outer sides of the lower and upper card layers.

Cancel and rethink in the Wason selection task: further evidence for the heuristic-analytic dual process theory.

PubMed

Wada, Kazushige; Nittono, Hiroshi

2004-06-01

The reasoning process in the Wason selection task was examined by measuring card inspection times in the letter-number and drinking-age problems. 24 students were asked to solve the problems presented on a computer screen. Only the card touched with a mouse pointer was visible, and the total exposure time of each card was measured. Participants were allowed to cancel their previous selections at any time. Although rethinking was encouraged, the cards once selected were rarely cancelled (10% of the total selections). Moreover, most of the cancelled cards were reselected (89% of the total cancellations). Consistent with previous findings, inspection times were longer for selected cards than for nonselected cards. These results suggest that card selections are determined largely by initial heuristic processes and rarely reversed by subsequent analytic processes. The present study gives further support for the heuristic-analytic dual process theory.

Reminder card helps patients remember OCs.

PubMed

1999-11-01

Organon has developed the Reminder Card to help women patients remember their regular intake of oral contraceptive (OC) pills. About 50% of women take birth control pills as prescribed, 25% miss a pill per month, and 25% miss two or more pills in the same time frame. The plastic card, about the size and shape of a credit card, contains a microchip timer. Reminder cards are available to providers who use the Starter Kits issued by the company for new-start patients on the Mircette OC. When patients begin their first pack of pills, they select the time of day they prefer to have the Reminder Card emit its tiny beep. The time is set into the microchip timer and the card is programmed to sound automatically at the pre-set time each day for the next three months. The direction for using the Reminder Card is outlined.

Network Information System

DOE Office of Scientific and Technical Information (OSTI.GOV)

1996-05-01

The Network Information System (NWIS) was initially implemented in May 1996 as a system in which computing devices could be recorded so that unique names could be generated for each device. Since then the system has grown to be an enterprise wide information system which is integrated with other systems to provide the seamless flow of data through the enterprise. The system Iracks data for two main entities: people and computing devices. The following are the type of functions performed by NWIS for these two entities: People Provides source information to the enterprise person data repository for select contractors andmore » visitors Generates and tracks unique usernames and Unix user IDs for every individual granted cyber access Tracks accounts for centrally managed computing resources, and monitors and controls the reauthorization of the accounts in accordance with the DOE mandated interval Computing Devices Generates unique names for all computing devices registered in the system Tracks the following information for each computing device: manufacturer, make, model, Sandia property number, vendor serial number, operating system and operating system version, owner, device location, amount of memory, amount of disk space, and level of support provided for the machine Tracks the hardware address for network cards Tracks the P address registered to computing devices along with the canonical and alias names for each address Updates the Dynamic Domain Name Service (DDNS) for canonical and alias names Creates the configuration files for DHCP to control the DHCP ranges and allow access to only properly registered computers Tracks and monitors classified security plans for stand-alone computers Tracks the configuration requirements used to setup the machine Tracks the roles people have on machines (system administrator, administrative access, user, etc...) Allows systems administrators to track changes made on the machine (both hardware and software) Generates an adjustment history of changes on selected fields« less

Easy robot programming for beginners and kids using augmented reality environments

NASA Astrophysics Data System (ADS)

Sakamoto, Kunio; Nishiguchi, Masahiro

2010-11-01

The authors have developed the mobile robot which can be programmed by command and instruction cards. All you have to do is to arrange cards on a table and to shot the programming stage by a camera. Our card programming system recognizes instruction cards and translates icon commands into the motor driver program. This card programming environment also provides low-level structure programming.

12 CFR Appendix E to Part 226 - Rules For Card Issuers That Bill on a Transaction-By-Transaction Basis

Code of Federal Regulations, 2010 CFR

2010-01-01

... provisions of Subpart B apply if credit cards are issued and (1) the card issuer and the seller are the same... 226.10. Section 226.11. This section applies when a card issuer receives a payment or other credit... Bill on a Transaction-by-Transaction Basis The following provisions of Subpart B apply if credit cards...

An Epidemiologic Investigation of Health Effects in Air Force Personnel Following Exposure to Herbicides. Volume 2. First Followup Examination Results.

DTIC Science & Technology

1987-10-01

Ranch Hand Enlisted Flyers ... .......... ... R-14 R-1O Cross Tabulation of Pleurisy - (Abnormal, Total) by- Exposure Index Category-by-Age Category-by...by-Pack-Year Category for Ranch Hand Enlisted Groundcrew ........... .. R-19 R-15 Cross Tabulation of Pleurisy - (Abnormal, Total) by- Exposure Index

Food Tabulator. DOT No. 211.582-010. Cafeteria Occupations. Coordinator's Guide. First Edition.

ERIC Educational Resources Information Center

East Texas State Univ., Commerce. Occupational Curriculum Lab.

This study guide, one of eight individualized units developed for students enrolled in cooperative part-time training and employed in a cafeteria, is composed of information about one specific occupation; this unit focuses on the duties of the food tabulator. Materials provided in this guide for coordinator use include a student progress chart; a…

Moon view period tabulations (with station masking) for Manned Space Flight Network stations, book 1

NASA Technical Reports Server (NTRS)

Gattie, M. M.; Williams, R. L.

1970-01-01

The times during which MSFN stations can view the moon are tabulated. Station view periods for each month are given. All times and dates refer to Greenwich Mean Time. AOS and LOS refer to the center of the moon at zero degrees elevation for moon rise and set, respectively.

Comparison of Cell Preparations between Commercially Available Filter Cards of the Cytospin with Custom Made Filter Cards.

PubMed

Krishnamurthy, Vani; Satish, Suchitha; Doreswamy, Srinivasa Murthy; Vimalambike, Manjunath Gubbanna

2016-07-01

Cytological evaluation of body fluids is an important diagnostic technique. Cytocentrifuge has contributed immensely to improve the diagnostic yield of the body fluids. Cytocentrifuge requires a filter card for absorbing the cell free fluid. This is the only consumable which needs to be purchased from the manufacturer at a significant cost. To compare the cell density in cytocentrifuge preparations made from commercially available filter cards with custom made filter cards. This was a prospective analytical study undertaken in department of pathology of a tertiary care centre. A 300 GSM handmade paper with the absorbability similar to the conventional card was obtained and fashioned to suit the filter card slot of the cytospin. Thirty seven body fluids were centrifuged using both conventional and custom made filter card. The cell density was measured as number of cells per 10 high power fields. The median cell density was compared using Mann-Whitney U test. The agreement between the values was analysed using Bland Altman analysis. The median cell count per 10 High power field (HPF) with conventional card was 386 and that with custom made card was 408. The difference was not statistically significant (p = 0.66). There was no significant difference in the cell density and alteration in the morphology between the cell preparations using both the cards. Custom made filter card can be used for cytospin cell preparations of body fluids without loss of cell density or alteration in the cell morphology and at a very low cost.

48 CFR 413.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2010 CFR

2010-10-01

... purchase card. 413.301 Section 413.301 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE....301 Governmentwide commercial purchase card. USDA policy and procedures on use of the Governmentwide commercial purchase card are established in Departmental Regulation Series 5000. ...

A Cashless Society? The Plastic Revolution. Resources in Technology.

ERIC Educational Resources Information Center

Ritz, John M.

1993-01-01

Relates the history of credit cards, their evolution to current forms, and innovations (debit cards, token cards, smart cards). Considers their sociocultural impact. Provides a design brief, including objectives, resources, evaluation criteria, outcomes, and a quiz. (SK)

Engineering software development with HyperCard

NASA Technical Reports Server (NTRS)

Darko, Robert J.

1990-01-01

The successful and unsuccessful techniques used in the development of software using HyperCard are described. The viability of the HyperCard for engineering is evaluated and the future use of HyperCard by this particular group of developers is discussed.

Machine Learning in Computer-Aided Synthesis Planning.

PubMed

Coley, Connor W; Green, William H; Jensen, Klavs F

2018-05-15

Computer-aided synthesis planning (CASP) is focused on the goal of accelerating the process by which chemists decide how to synthesize small molecule compounds. The ideal CASP program would take a molecular structure as input and output a sorted list of detailed reaction schemes that each connect that target to purchasable starting materials via a series of chemically feasible reaction steps. Early work in this field relied on expert-crafted reaction rules and heuristics to describe possible retrosynthetic disconnections and selectivity rules but suffered from incompleteness, infeasible suggestions, and human bias. With the relatively recent availability of large reaction corpora (such as the United States Patent and Trademark Office (USPTO), Reaxys, and SciFinder databases), consisting of millions of tabulated reaction examples, it is now possible to construct and validate purely data-driven approaches to synthesis planning. As a result, synthesis planning has been opened to machine learning techniques, and the field is advancing rapidly. In this Account, we focus on two critical aspects of CASP and recent machine learning approaches to both challenges. First, we discuss the problem of retrosynthetic planning, which requires a recommender system to propose synthetic disconnections starting from a target molecule. We describe how the search strategy, necessary to overcome the exponential growth of the search space with increasing number of reaction steps, can be assisted through a learned synthetic complexity metric. We also describe how the recursive expansion can be performed by a straightforward nearest neighbor model that makes clever use of reaction data to generate high quality retrosynthetic disconnections. Second, we discuss the problem of anticipating the products of chemical reactions, which can be used to validate proposed reactions in a computer-generated synthesis plan (i.e., reduce false positives) to increase the likelihood of experimental success. While we introduce this task in the context of reaction validation, its utility extends to the prediction of side products and impurities, among other applications. We describe neural network-based approaches that we and others have developed for this forward prediction task that can be trained on previously published experimental data. Machine learning and artificial intelligence have revolutionized a number of disciplines, not limited to image recognition, dictation, translation, content recommendation, advertising, and autonomous driving. While there is a rich history of using machine learning for structure-activity models in chemistry, it is only now that it is being successfully applied more broadly to organic synthesis and synthesis design. As reported in this Account, machine learning is rapidly transforming CASP, but there are several remaining challenges and opportunities, many pertaining to the availability and standardization of both data and evaluation metrics, which must be addressed by the community at large.

Authentication techniques for smart cards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, R.A.

1994-02-01

Smart card systems are most cost efficient when implemented as a distributed system, which is a system without central host interaction or a local database of card numbers for verifying transaction approval. A distributed system, as such, presents special card and user authentication problems. Fortunately, smart cards offer processing capabilities that provide solutions to authentication problems, provided the system is designed with proper data integrity measures. Smart card systems maintain data integrity through a security design that controls data sources and limits data changes. A good security design is usually a result of a system analysis that provides a thoroughmore » understanding of the application needs. Once designers understand the application, they may specify authentication techniques that mitigate the risk of system compromise or failure. Current authentication techniques include cryptography, passwords, challenge/response protocols, and biometrics. The security design includes these techniques to help prevent counterfeit cards, unauthorized use, or information compromise. This paper discusses card authentication and user identity techniques that enhance security for microprocessor card systems. It also describes the analysis process used for determining proper authentication techniques for a system.« less

Mammography screening credit card and compliance.

PubMed

Schapira, D V; Kumar, N B; Clark, R A; Yag, C

1992-07-15

Screening for breast cancer using mammography has been shown to be effective in reducing mortality from breast cancer. The authors attempted to determine if use of a wallet-size plastic screening "credit" card would increase participants' compliance for subsequent mammograms when compared with traditional methods of increasing compliance. Two hundred and twenty consecutive women, ages 40-70 years, undergoing their first screening mammography were recruited and assigned randomly to four groups receiving (1) a reminder plastic credit card (2) reminder credit card with written reminder; (3) appointment card; and (4) verbal recommendation. Return rates of the four groups were determined after 15 months. The return rate for subsequent mammograms was significantly higher for participants (72.4%) using the credit card than for participants (39.8%) exposed to traditional encouragement/reminders (P less than 0.0001). The credit card was designed to show the participant's screening anniversary, and the durability of the card may have been a factor in increasing the return rate. The use of reminder credit cards may increase compliance for periodic screening examinations for other cancers and other chronic diseases.

Neonatal Jaundice Detection System.

PubMed

Aydın, Mustafa; Hardalaç, Fırat; Ural, Berkan; Karap, Serhat

2016-07-01

Neonatal jaundice is a common condition that occurs in newborn infants in the first week of life. Today, techniques used for detection are required blood samples and other clinical testing with special equipment. The aim of this study is creating a non-invasive system to control and to detect the jaundice periodically and helping doctors for early diagnosis. In this work, first, a patient group which is consisted from jaundiced babies and a control group which is consisted from healthy babies are prepared, then between 24 and 48 h after birth, 40 jaundiced and 40 healthy newborns are chosen. Second, advanced image processing techniques are used on the images which are taken with a standard smartphone and the color calibration card. Segmentation, pixel similarity and white balancing methods are used as image processing techniques and RGB values and pixels' important information are obtained exactly. Third, during feature extraction stage, with using colormap transformations and feature calculation, comparisons are done in RGB plane between color change values and the 8-color calibration card which is specially designed. Finally, in the bilirubin level estimation stage, kNN and SVR machine learning regressions are used on the dataset which are obtained from feature extraction. At the end of the process, when the control group is based on for comparisons, jaundice is succesfully detected for 40 jaundiced infants and the success rate is 85 %. Obtained bilirubin estimation results are consisted with bilirubin results which are obtained from the standard blood test and the compliance rate is 85 %.

Wide-bandwidth high-resolution search for extraterrestrial intelligence

NASA Technical Reports Server (NTRS)

Horowitz, Paul

1993-01-01

A third antenna was added to the system. It is a terrestrial low-gain feed, to act as a veto for local interference. The 3-chip design for a 4 megapoint complex FFT was reduced to finished working hardware. The 4-Megachannel circuit board contains 36 MByte of DRAM, 5 CPLDs, the three large FFT ASICs, and 74 ICs in all. The Austek FDP-based Spectrometer/Power Accumulator (SPA) has now been implemented as a 4-layer printed circuit. A PC interface board has been designed and together with its associated user interface and control software allows an IBM compatible computer to control the SPA board, and facilitates the transfer of spectra to the PC for display, processing, and storage. The Feature Recognizer Array cards receive the stream of modulus words from the 4M FFT cards, and forward a greatly thinned set of reports to the PC's in whose backplane they reside. In particular, a powerful ROM-based state-machine architecture has been adopted, and DRAM has been added to permit integration modes when tracking or reobserving source candidates. The general purpose (GP) array consists of twenty '486 PC class computers, each of which receives and processes the data from a feature extractor/correlator board set. The array performs a first analysis on the provided 'features' and then passes this information on to the workstation. The core workstation software is now written. That is, the communication channels between the user interface, the backend monitor program and the PC's have working software.

Research on the SIM card implementing functions of transport card

NASA Astrophysics Data System (ADS)

Li, Yi; Wang, Lin

2015-12-01

This paper is based on the analysis for theory and key technologies of contact communication, contactless communication card and STK menu, and proposes complete software and hardware solution for achieving convenience and secure mobile payment system on SIM card.

48 CFR 1313.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2010 CFR

2010-10-01

... purchase card. 1313.301 Section 1313.301 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE....301 Governmentwide commercial purchase card. The Department's procedures for the use and control of the Governmentwide commercial purchase card are set forth in CAM 1313.301. ...

Print a Bed Bug Card - (Single Cards)

EPA Pesticide Factsheets

Two sets of business-card-sized lists of tips for recognizing bed bugs and the signs of an infestation, including a photo of bed bugs to assist identification. One card is for general use around home or office, the other for travelers.

75 FR 55392 - Employment Network Report Card

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-10

... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA-2010-0046] Employment Network Report Card AGENCY... quality assurance, including a ticket consumer Employment Network Report Card. SUMMARY: We are soliciting... this goal by combining a user-friendly EN Report Card, which contains customer satisfaction feedback...

12 CFR Appendix E - Rules for Card Issuers That Bill on a Transaction-by-Transaction Basis

Code of Federal Regulations, 2014 CFR

2014-01-01

... to Credit Card Accounts and Open-End Credit Offered to College Students Reevaluation of rate... The following provisions of Subpart B apply if credit cards are issued and the card issuer and the... credit card. 1. Section 226.6(a)(5) or § 226.6(b)(5)(iii). 2. Section 226.6(a)(2) or § 226.6(b)(3)(ii)(B...

Reconstruction of Sea State One

DTIC Science & Technology

1988-02-01

this section only a general overview of the wave computer system will be offered. A more comprehensive treatment of this subject is available in Appendix...1) Sync Strip and Threshold Processing Card (2) Pulse Generation Logic Card (3) X Vector Logic Card (4) Y Vector Logic Card (5) Blanking Interval...output by this comparator when the threshold is crossed, which shall be referred to as threshold crossing (THC). (2) PULSE GENERATION LOGIC CARD Turning

Determinants of debit cards acceptance: An empirical investigation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ismail, Shafinar; Adnan, Azimah; Azizi, Amsyar

These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300more » respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry.« less

Determinants of debit cards acceptance: An empirical investigation

NASA Astrophysics Data System (ADS)

Ismail, Shafinar; Bakri, Mohamed Hariri; Zulkepli, Jafri; Adnan, Azimah; Azizi, Amsyar

2014-12-01

These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300 respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry.

Point and Compact Hα Sources in the Interior of M33

NASA Astrophysics Data System (ADS)

Moody, J. Ward; Hintz, Eric G.; Joner, Michael D.; Roming, Peter W. A.; Hintz, Maureen L.

2017-12-01

A variety of interesting objects such as Wolf-Rayet stars, tight OB associations, planetary nebulae, X-ray binaries, etc., can be discovered as point or compact sources in Hα surveys. How these objects distribute through a galaxy sheds light on the galaxy star formation rate and history, mass distribution, and dynamics. The nearby galaxy M33 is an excellent place to study the distribution of Hα-bright point sources in a flocculant spiral galaxy. We have reprocessed an archived WIYN continuum-subtracted Hα image of the inner 6.‧5 × 6.‧5 of M33 and, employing both eye and machine searches, have tabulated sources with a flux greater than approximately 10-15 erg cm-2s-1. We have effectively recovered previously mapped H II regions and have identified 152 unresolved point sources and 122 marginally resolved compact sources, of which 39 have not been previously identified in any archive. An additional 99 Hα sources were found to have sufficient archival flux values to generate a Spectral Energy Distribution. Using the SED, flux values, Hα flux value, and compactness, we classified 67 of these sources.

Genetic errors of the human CARD-BCL10-MALT1 (CBM) complex: molecular, immunological, and clinical heterogeneity

PubMed Central

de Diego, Rebeca Pérez; Sánchez-Ramón, Silvia; López-Collazo, Eduardo; Martínez-Barricarte, Rubén; Cubillos-Zapata, Carolina; Cerdán, Antonio Ferreira; Casanova, Jean-Laurent; Puel, Anne

2016-01-01

Three members of the caspase recruitment domain (CARD) family of adaptors (CARD9, CARD10, and CARD11) are known to form heterotrimers with B-cell lymphoma 10 (BCL10) and mucosa-associated lymphoid tissue lymphoma-translocation gene 1 (MALT1). These three CARD-BCL10-MALT1 (CBM) complexes activate NF-κB in both the innate and adaptive arms of immunity. Human inherited defects of the three components of the CBM complex, including the two adaptors CARD9 and CARD11 and the two core components BCL10 and MALT1, have recently been reported. Bi-allelic loss-of-function (LOF) mutant alleles underlie several different immunological and clinical phenotypes, which can be assigned to two distinct categories. Isolated invasive fungal infections, of unclear cellular basis, are associated with CARD9 deficiency, whereas a broad range of clinical manifestations, including those characteristic of T- and B-lymphocyte defects, are associated with CARD11, MALT1 and BCL10 deficiencies. Interestingly, humans with these mutations have some features in common with the corresponding knockout mice, but other features are different between humans and mice. Moreover, germline and somatic gain-of-function (GOF) mutations of MALT1, BCL10 and CARD11 have also been found in other patients with lymphoproliferative disorders. This broad range of germline and somatic CBM lesions, including LOF and GOF mutations, highlights the contribution of each of the components of the CBM to human immunity. PMID:26277595

Human Factors Assessment of Respiratory Support Pack (RSP) Cue Card

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; Hudy, Cynthia; Smith, Danielle; Byrne, Vicky

2005-01-01

The Respiratory Support Pack (RSP) is a medical pack onboard the International Space Station (ISS) that contains much of the necessary equipment for providing aid to a conscious or unconscious crewmember in respiratory distress. Inside the RSP lid pocket is a 5.5 by 11 inch paper cue card, which is used by a Crew Medical Officer as the procedure to set up the equipment and deliver oxygen to a crewmember. In training, crewmembers expressed concerns about the readability and usability of the cue card; consequently, updating the cue card was prioritized as an activity to be completed prior to Space Shuttle return-to-flight. The Usability Testing and Analysis Facility at the Johnson Space Center evaluated the current layout of the cue card, and proposed several new cue card designs based on human factors principals. A series of three studies were performed in order to experimentally compare performance with each of the cue card designs. Nonmedically trained personnel used either a redesigned RSP cue card, or the original card to simulate resuscitation (using a mannequin along with the hardware). Time to completion, errors and subjective ratings were recorded. The addition of pictures, colors, borders, and simplification of the flow of information (making minimal changes to the actual procedure content) elicited great benefits during testing. Time to complete RSP procedures was reduced by as much as three minutes with the final cue card design. Detailed results from these studies, as well as general guidelines for cue card design will be discussed.

76 FR 26678 - Withholding on Payments by Government Entities to Persons Providing Property or Services

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-09

... application of section 3402(t) to payments by debit cards, credit cards, stored value cards, and other payment cards. Proposed regulations under sections 3402(t), 3406, 6011, 6051, 6071, and 6302 of the Code were...

31 CFR 1028.300 - General.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ENFORCEMENT NETWORK, DEPARTMENT OF THE TREASURY RULES FOR OPERATORS OF CREDIT CARD SYSTEMS Reports Required To Be Made by Operators of Credit Card Systems § 1028.300 General. Operators of credit card systems are... contained in that subpart which apply to operators of credit card systems. ...

48 CFR 2913.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2013 CFR

2013-10-01

... other methods of purchasing. However, the same legal restrictions apply to credit card purchases that.../Agency Purchase/Credit Card Program procedures. A number of the more common restrictions which... purchase card. 2913.301 Section 2913.301 Federal Acquisition Regulations System DEPARTMENT OF LABOR...

31 CFR 1028.300 - General.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ENFORCEMENT NETWORK, DEPARTMENT OF THE TREASURY RULES FOR OPERATORS OF CREDIT CARD SYSTEMS Reports Required To Be Made by Operators of Credit Card Systems § 1028.300 General. Operators of credit card systems are... contained in that subpart which apply to operators of credit card systems. ...

48 CFR 2913.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2014 CFR

2014-10-01

... other methods of purchasing. However, the same legal restrictions apply to credit card purchases that.../Agency Purchase/Credit Card Program procedures. A number of the more common restrictions which... purchase card. 2913.301 Section 2913.301 Federal Acquisition Regulations System DEPARTMENT OF LABOR...

48 CFR 2913.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2011 CFR

2011-10-01

... other methods of purchasing. However, the same legal restrictions apply to credit card purchases that.../Agency Purchase/Credit Card Program procedures. A number of the more common restrictions which... purchase card. 2913.301 Section 2913.301 Federal Acquisition Regulations System DEPARTMENT OF LABOR...

Overview

Science.gov Websites

maintaining both types of cards. Common Access Card (CAC) "Smart" ID card for active-duty military personnel, Selected Reserve, DoD civilian employees, and eligible contractor personnel. CAC Types & and military retirees to access service benefits and privileges. ID Card Types & Eligibility

Smart cards: a specific application in the hospital.

PubMed

Güler, I; Zengin, R M; Sönmez, M

1998-12-01

Computers have the ability to process and access tremendous amounts of information in our daily lives. But, now, individuals have this ability by carrying a smart card in their own wallets. These cards provide us the versatility, power, and security of computers. This study begins with a short description of smart cards and their advantages. Then, an electronic circuit that is designed for healthcare application in hospitals is introduced. This circuit functions as a smart card holder identifier, access controller for hospital doors and also can be used as a smart card reader/writer. Design steps of this electronic circuit, operation principles, serial communication with P.C., and the software are examined. Finally a complete access control network for hospital doors that functions with smart cards is discussed.

Discount medical cards: innovation or illusion?

PubMed

Kofman, Mila; Libster, Jennifer; Bangit, Eliza

2005-03-01

Discount medical cards have come under increasing scrutiny by regulators and law enforcement officials as a result of mounting consumer-reported problems. For their study, the authors tested five cards available in the Washington, D.C., metro area; interviewed card company representatives, state attorneys general insurance regulators, and insurance agents; and reviewed court and administrative actions. While some cards provide a measure of value, other cards were found to have serious drawbacks, including: high-pressure sales tactics; misleading or inaccurate promotion; exaggerated claims of savings; difficulty finding participating doctors; and providers who failed to give cardholders promised discounts. Some discount card companies are seeking to reform the market through a trade association and voluntary code of conduct. Still, legislative and regulatory interventions will be needed to protect consumers in an unregulated and growing market.

Increased Urge to Gamble Following Near-Miss Outcomes May Drive Purchasing Behaviour in Scratch Card Gambling.

PubMed

Stange, Madison; Graydon, Candice; Dixon, Mike J

2017-09-01

Previous research into scratch card gambling has highlighted the effects of these games on players' arousal and affective states. Specifically, near-miss outcomes in scratch cards (uncovering 2 of 3 needed jackpot symbols) have been associated with high levels of physiological and subjective arousal and negative emotional evaluations, including increased frustration. We sought to extend this research by examining whether near-misses prompted increases in gambling urge, and the subsequent purchasing of additional scratch cards. Participants played two scratch cards with varying outcomes with half of the sample experiencing a near-miss for the jackpot prize, and the other half experiencing a regular loss. Players rated their urge to continue gambling after each game outcome, and following the initial playing phase, were then able to use their winnings to purchase additional cards. Our results indicated that near-misses increased the urge to gamble significantly more than regular losses, and urge to gamble in the near-miss group was significantly correlated with purchasing at least one additional card. Although some players in the loss group purchased another card, there was no correlation between urge to gamble and purchasing in this group. Additionally, participants in the near-miss group who purchased additional cards reported higher levels of urge than those who did not purchase more cards. This was not true for the loss group: participants who experienced solely losing outcomes reported similar levels of urge regardless of whether or not they purchased more scratch cards. Despite near-misses' objective status as monetary losses, the increased urge that follows near-miss outcomes may translate into further scratch card gambling for a subset of individuals .

Roles of RIG-I N-terminal tandem CARD and splice variant in TRIM25-mediated antiviral signal transduction

PubMed Central

Gack, Michaela U.; Kirchhofer, Axel; Shin, Young C.; Inn, Kyung-Soo; Liang, Chengyu; Cui, Sheng; Myong, Sua; Ha, Taekjip; Hopfner, Karl-Peter; Jung, Jae U.

2008-01-01

The caspase recruitment domain (CARD) of intracellular adaptors and sensors plays a critical role in the assembly of signaling complexes involved in innate host defense against pathogens and in the regulation of inflammatory responses. The cytosolic receptor retinoic acid-inducible gene-I (RIG-I) recognizes viral RNA in a 5′-triphosphate-dependent manner and initiates an antiviral signaling cascade. Upon viral infection, the N-terminal CARDs of RIG-I undergo the K63-linked ubiquitination induced by tripartite motif protein 25 (TRIM25), critical for the interaction of RIG-I with its downstream signaling partner MAVS/VISA/IPS-1/Cardif. Here, we demonstrate the distinct roles of RIG-I first and second CARD in TRIM25-mediated RIG-I ubiquitination: TRIM25 binds the RIG-I first CARD and subsequently ubiquitinates its second CARD. The T55I mutation in RIG-I first CARD abolishes TRIM25 interaction, whereas the K172R mutation in the second CARD eliminates polyubiquitin attachment. The necessity of the intact tandem CARD for RIG-I function is further evidenced by a RIG-I splice variant (SV) whose expression is robustly up-regulated upon viral infection. The RIG-I SV carries a short deletion (amino acids 36–80) within the first CARD and thereby loses TRIM25 binding, CARD ubiquitination, and downstream signaling ability. Furthermore, because of its robust inhibition of virus-induced RIG-I multimerization and RIG-I-MAVS signaling complex formation, this SV effectively suppresses the RIG-I-mediated IFN-β production. This study not only elucidates the vital role of the intact tandem CARD for TRIM25-mediated RIG-I activation but also identifies the RIG-I SV as an off-switch regulator of its own signaling pathway. PMID:18948594

Roles of RIG-I N-terminal tandem CARD and splice variant in TRIM25-mediated antiviral signal transduction.

PubMed

Gack, Michaela U; Kirchhofer, Axel; Shin, Young C; Inn, Kyung-Soo; Liang, Chengyu; Cui, Sheng; Myong, Sua; Ha, Taekjip; Hopfner, Karl-Peter; Jung, Jae U

2008-10-28

The caspase recruitment domain (CARD) of intracellular adaptors and sensors plays a critical role in the assembly of signaling complexes involved in innate host defense against pathogens and in the regulation of inflammatory responses. The cytosolic receptor retinoic acid-inducible gene-I (RIG-I) recognizes viral RNA in a 5'-triphosphate-dependent manner and initiates an antiviral signaling cascade. Upon viral infection, the N-terminal CARDs of RIG-I undergo the K(63)-linked ubiquitination induced by tripartite motif protein 25 (TRIM25), critical for the interaction of RIG-I with its downstream signaling partner MAVS/VISA/IPS-1/Cardif. Here, we demonstrate the distinct roles of RIG-I first and second CARD in TRIM25-mediated RIG-I ubiquitination: TRIM25 binds the RIG-I first CARD and subsequently ubiquitinates its second CARD. The T(55)I mutation in RIG-I first CARD abolishes TRIM25 interaction, whereas the K(172)R mutation in the second CARD eliminates polyubiquitin attachment. The necessity of the intact tandem CARD for RIG-I function is further evidenced by a RIG-I splice variant (SV) whose expression is robustly up-regulated upon viral infection. The RIG-I SV carries a short deletion (amino acids 36-80) within the first CARD and thereby loses TRIM25 binding, CARD ubiquitination, and downstream signaling ability. Furthermore, because of its robust inhibition of virus-induced RIG-I multimerization and RIG-I-MAVS signaling complex formation, this SV effectively suppresses the RIG-I-mediated IFN-beta production. This study not only elucidates the vital role of the intact tandem CARD for TRIM25-mediated RIG-I activation but also identifies the RIG-I SV as an off-switch regulator of its own signaling pathway.

Card9 mediates susceptibility to intestinal pathogens through microbiota modulation and control of bacterial virulence.

PubMed

Lamas, Bruno; Michel, Marie-Laure; Waldschmitt, Nadine; Pham, Hang-Phuong; Zacharioudaki, Vassiliki; Dupraz, Louise; Delacre, Myriam; Natividad, Jane M; Costa, Gregory Da; Planchais, Julien; Sovran, Bruno; Bridonneau, Chantal; Six, Adrien; Langella, Philippe; Richard, Mathias L; Chamaillard, Mathias; Sokol, Harry

2017-08-08

In association with innate and adaptive immunity, the microbiota controls the colonisation resistance against intestinal pathogens. Caspase recruitment domain 9 ( CARD9 ), a key innate immunity gene, is required to shape a normal gut microbiota. Card9 -/- mice are more susceptible to the enteric mouse pathogen Citrobacter rodentium that mimics human infections with enteropathogenic and enterohaemorrhagic Escherichia coli . Here, we examined how CARD9 controls C. rodentium infection susceptibility through microbiota-dependent and microbiota-independent mechanisms. C. rodentium infection was assessed in conventional and germ-free (GF) wild-type (WT) and Card9 -/- mice. To explore the impact of Card9 -/- microbiota in infection susceptibility, GF WT mice were colonised with WT (WT→GF) or Card9 -/- ( Card9 -/- →GF) microbiota before C. rodentium infection. Microbiota composition was determined by 16S rDNA gene sequencing. Inflammation severity was determined by histology score and lipocalin level. Microbiota-host immune system interactions were assessed by quantitative PCR analysis. CARD9 controls pathogen virulence in a microbiota-independent manner by supporting a specific humoral response. Higher susceptibility to C. rodentium -induced colitis was observed in Card9 -/- →GF mice. The microbiota of Card9 -/- mice failed to outcompete the monosaccharide-consuming C. rodentium , worsening the infection severity. A polysaccharide-enriched diet counteracted the ecological advantage of C. rodentium and the defective pathogen-specific antibody response in Card9 -/- mice. CARD9 modulates the susceptibility to intestinal infection by controlling the pathogen virulence in a microbiota-dependent and microbiota-independent manner. Genetic susceptibility to intestinal pathogens can be overridden by diet intervention that restores humoural immunity and a competing microbiota. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Using Business Cards to Teach Document Design.

ERIC Educational Resources Information Center

Nelson, Ronald J.

1994-01-01

Argues that business cards, as a key means of initiating business contacts, are worth studying in business writing courses. Shows instructors how to incorporate a unit on business card design into their business communications courses. Suggests the criteria by which business cards can be evaluated. (HB)

Info card for surgery waiting room improves satisfaction.

PubMed

2015-11-01

A hospital is reporting improved patient satisfaction from providing an information card in the surgery department. The card includes expected wait times. The card is provided by the patient transport team. Telephone numbers are included for more information. Staff update family members hourly during surgery.

Follow Up: Credit Card Caution

ERIC Educational Resources Information Center

Cahill, Timothy P.

2007-01-01

In "Pushing Plastic," ("The New England Journal of Higher Education", Summer 2007), John Humphrey notes that many college administrators justify their credit card solicitations by suggesting that credit card access will help students learn to manage their own finances. Instead, credit card debt will teach thousands of students…

Print a Bed Bug Card - (Page of Cards)

EPA Pesticide Factsheets

For mass distribution: two sets of business-card-sized lists of tips for recognizing bed bugs and signs of an infestation, including a photo of bed bugs to assist identification. One card is for general use around home or office, the other for travelers.

Coding the Eggen Cards (Poster abstract)

NASA Astrophysics Data System (ADS)

Silvis, G.

2014-06-01

(Abstract only) A look at the Eggen Portal for accessing the Eggen cards. And a call for volunteers to help code the cards: 100,000 cards must be looked at and their star references identified and coded into the database for this to be a valuable resource.

Investigating customer racial discrimination in the secondary baseball card market.

PubMed

Primm, Eric; Piquero, Nicole Leeper; Piquero, Alex R; Regoli, Robert M

2011-01-01

A growing body of literature in a variety of disciplines has appeared over the last 20 years examining customer racial bias in the secondary sports card market; however, consensus on the matter has yet to emerge. In this article, we explore the more subtle ways that a player's race/ethnicity may affect the value of his sports card including a player's skin tone (light- to dark-skinned). Data were obtained for 383 black, Latino, and white baseball players who had received at least one vote for induction into Major League Baseball's Hall of Fame including their career performance statistics, rookie card price, card availability, Hall of Fame status, and skin tone. Findings indicate that card availability is the primary determinant of card value while a player's skin tone has no direct effect. Subsequent analysis demonstrates that a player's race (white/non-white) rather than skin tone did have an effect as it interacts with Hall of Fame status to influence his rookie card price.

2010 Military Family Life Project (MFLP) - Couples: Tabulations of Responses

DTIC Science & Technology

2013-08-31

interest income; dividends; child support/alimony; social security, welfare assistance; and net rent, trusts, and royalties from any other investments ...2010 Military Family Life Project: Couples Tabulations of Responses Additional copies of this report may be obtained from: Defense... RESPONSES Defense Manpower Data Center Human Resources Strategic Assessment Program 4800 Mark Center Drive, Suite 04E25-01, Alexandria, VA 22350

Network Prime-Time Violence Tabulations for 1975-76 Season.

ERIC Educational Resources Information Center

Klapper, Joseph T.

This is an annual report on violence in prime-time television. The tabulations, based on 13 weeks of monitoring prime-time programs on three networks, indicate a decline in violence by 24% and a decline in the rate per hour of dramatic violence to 1.9 incidents per hour since last season. The study also indicated that the introduction of the…

Twelve-year planetary ephemeris: 1995-2006

NASA Technical Reports Server (NTRS)

Espenak, Fred

1994-01-01

Accurate geocentric positions and physical ephemerides are tabulated for the Sun, Moon, Mercury, Venus, Mars, Jupiter, Saturn, Uranus, Neptune, and Pluto for the 12-year period 1995 through 2006. The frequency interval is 2 days for the Sun and classical planets. Uranus, Neptune, and Pluto are tabulated at 4-day intervals. Because of its rapid apparent motion, the Moon's ephemeris is given daily.

Selected yield tables for plantations and natural stands in Inland Northwest Forests

Treesearch

Albert R. Stage; David L. Renner; Roger C. Chapman

1988-01-01

Yields arrayed by site index and age have been tabulated for plantations of 500 trees per acre, with five thinning regimes, for Douglas-fir, grand fir, and western larch. Yields were also tabulated for naturally regenerated stands of the grand fir-cedar-hemlock ecosystem of the Inland Empire. All yields were estimated with the Prognosis Model for Stand Development,...

Tabulated dose uniformity ratio and minimum dose data: rectangular 60Co source plaques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Galanter, L.

1971-01-01

The data tabulated herein extend to rectangular cobalt-60 plaques the information presented for square plaques in BNL 50145 (Revised). The user is referred to BNL 50145 (Revised) and to the other reports listed for a complete discussion of the parameters involved in data generation and for instructions on the use of these data in gamma irradiator design.

Public Elementary and Secondary School Revenues and Current Expenditures for Fiscal Year 1987 (School Year 1986-87): Preliminary Tabulations. E.D. TABS.

ERIC Educational Resources Information Center

National Center for Education Statistics (ED), Washington, DC.

This document reports preliminary tabulations of public elementary and secondary school revenues and current expenditures for Fiscal Year 1987 (School Year 1986-87). Data shows revenues by local, state, intermediate, and federal sources, and current expenditures by categories of instruction, support services, noninstructional services, and fixed…

Tables of X-ray absorption corrections and dispersion corrections: the new versus the old

NASA Astrophysics Data System (ADS)

Creagh, Dudley

1990-11-01

This paper compares the data on X-ray absorption coefficients calculated by Creagh and Hubbell and tabulated in International Tables for Crystallography, vol. C, ed. A.J.C. Wilson (1990) section 4.2.4 [1] with empirical (Saloman, Hubbell and Scofield, At. Data and Nucl. Data Tables 38 (1988) 1, [6]) and semi-empirical (Hubbell, McMaster, Kerr Del Grande and Mallett, in: International Tables for Crystallography, vol. IV, eds. Ibers and Hamilton (Kynoch, Birmingham, 1974) [2]) tabulations as well as the renormalized relativistic Dirac-Hartree-Fock calculations of Scofield [6]. It also makes comparisons of the real part of the dispersion correction ƒ‧(ω, 0) and tabulated in ref. [1], with theoretical data sets (Cromer and Liberman, J. Chem. Phys. 53 (1970) 1891, and Acta Crystallogr. A37 (1981) 267 [4,5]; Wang, Phys. Rev. A34 (1986) 636 [85]; Kissel, in: Workshop Report on New Dimensions in X-ray Scattering, CONF-870459 (Livermore, 1987) p. 9 [86]) and data collected using a variety of experimental techniques. In both cases the data tabulated in ref. [1] is shown to give improved self-consistency and agreement with experiment.

Crystal structure of human IPS-1/MAVS/VISA/Cardif caspase activation recruitment domain.

PubMed

Potter, Jane A; Randall, Richard E; Taylor, Garry L

2008-02-28

IPS-1/MAVS/VISA/Cardif is an adaptor protein that plays a crucial role in the induction of interferons in response to viral infection. In the initial stage of the intracellular antiviral response two RNA helicases, retinoic acid inducible gene-I (RIG-I) and melanoma differentiation-association gene 5 (MDA5), are independently able to bind viral RNA in the cytoplasm. The 62 kDa protein IPS-1/MAVS/VISA/Cardif contains an N-terminal caspase activation and recruitment (CARD) domain that associates with the CARD regions of RIG-I and MDA5, ultimately leading to the induction of type I interferons. As a first step towards understanding the molecular basis of this important adaptor protein we have undertaken structural studies of the IPS-1 MAVS/VISA/Cardif CARD region. The crystal structure of human IPS-1/MAVS/VISA/Cardif CARD has been determined to 2.1A resolution. The protein was expressed and crystallized as a maltose-binding protein (MBP) fusion protein. The MBP and IPS-1 components each form a distinct domain within the structure. IPS-1/MAVS/VISA/Cardif CARD adopts a characteristic six-helix bundle with a Greek-key topology and, in common with a number of other known CARD structures, contains two major polar surfaces on opposite sides of the molecule. One face has a surface-exposed, disordered tryptophan residue that may explain the poor solubility of untagged expression constructs. The IPS-1/MAVS/VISA/Cardif CARD domain adopts the classic CARD fold with an asymmetric surface charge distribution that is typical of CARD domains involved in homotypic protein-protein interactions. The location of the two polar areas on IPS-1/MAVS/VISA/Cardif CARD suggest possible types of associations that this domain makes with the two CARD domains of MDA5 or RIG-I. The N-terminal CARD domains of RIG-I and MDA5 share greatest sequence similarity with IPS-1/MAVS/VISA/Cardif CARD and this has allowed modelling of their structures. These models show a very different charge profile for the equivalent surfaces compared to IPS-1/MAVS/VISA/Cardif CARD.

The mother's card: a simplified aid for primary health workers.

PubMed

Shah, K P; Shah, P M

1981-02-01

The Mother's Card and its use are described. The card is filled out by the health worker and provides data on the mother concerning family planning, menstrual cycles, pregnancy period (including whether at risk, state of nutrition, immunization against tetanus, and expected date of birth), and breastfeeding. The card is kept by the mother, and the health worker keeps a copy. Each card has space for 10 years and up to 4 pregnancies. The cards have been used successfully in India since 1976 and in Somalia since early 1980, and were useful in strengthening family planning programs as well as identifying pregnancies at risk for special attention.

31 CFR 1021.400 - General.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ENFORCEMENT NETWORK, DEPARTMENT OF THE TREASURY RULES FOR CASINOS AND CARD CLUBS Records Required To Be Maintained By Casinos and Card Clubs § 1021.400 General. Casinos and card clubs are subject to the recordkeeping requirements set forth and cross referenced in this subpart. Casinos and card clubs should also...

31 CFR 1021.400 - General.

Code of Federal Regulations, 2014 CFR

2014-07-01

... ENFORCEMENT NETWORK, DEPARTMENT OF THE TREASURY RULES FOR CASINOS AND CARD CLUBS Records Required To Be Maintained By Casinos and Card Clubs § 1021.400 General. Casinos and card clubs are subject to the recordkeeping requirements set forth and cross referenced in this subpart. Casinos and card clubs should also...

31 CFR 1021.400 - General.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ENFORCEMENT NETWORK, DEPARTMENT OF THE TREASURY RULES FOR CASINOS AND CARD CLUBS Records Required To Be Maintained By Casinos and Card Clubs § 1021.400 General. Casinos and card clubs are subject to the recordkeeping requirements set forth and cross referenced in this subpart. Casinos and card clubs should also...

31 CFR 1021.400 - General.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ENFORCEMENT NETWORK, DEPARTMENT OF THE TREASURY RULES FOR CASINOS AND CARD CLUBS Records Required To Be Maintained By Casinos and Card Clubs § 1021.400 General. Casinos and card clubs are subject to the recordkeeping requirements set forth and cross referenced in this subpart. Casinos and card clubs should also...

48 CFR 313.301 - Government-wide commercial purchase card.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., Appendix B, “Improving the Management of Government Charge Card Programs;” GSA's SmartPay Program guidance; and HHS Purchase Card program standards. (2) The OPDIVs, through their designated Agency/Organization... training requirements to ensure effective implementation of the HHS purchase card program. (3) OPDIVs shall...

"Procurement Cards" Help Colleges Reduce Paperwork and Delays in Purchasing.

ERIC Educational Resources Information Center

Mercer, Joye

1995-01-01

Increasingly, colleges and universities are using procurement cards, which are credit cards with limited usage, for institutional faculty and staff to make small purchases without going through costly and inefficient purchasing channels. Some concerns include distribution of cards, increased liability, and monitoring of expenditures. (MSE)

48 CFR 2413.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Commercial Credit Card Program. [60 FR 46155, Sept. 5, 1995. Redesignated at 64 FR 46095, Aug. 23, 1999] ... purchase card. 2413.301 Section 2413.301 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND... Acquisition Methods 2413.301 Governmentwide commercial purchase card. (c) HUD's procedures concerning the use...

31 CFR 103.28 - Identification required.

Code of Federal Regulations, 2010 CFR

2010-07-01

... cashing checks for nondepositors (e.g., a drivers license or credit card). A bank signature card may be... specific identifying information (i.e., the account number of the credit card, the driver's license number... the United States must be made by passport, alien identification card, or other official document...

48 CFR 13.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the current GSA credit card contract. Agency procedures should not limit the use of the Governmentwide... purchase card. 13.301 Section 13.301 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... Governmentwide commercial purchase card. (a) Except as provided in 32.1108(b)(2), the Governmentwide commercial...

31 CFR 1028.400 - General.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ENFORCEMENT NETWORK, DEPARTMENT OF THE TREASURY RULES FOR OPERATORS OF CREDIT CARD SYSTEMS Records Required To Be Maintained By Operators of Credit Card Systems § 1028.400 General. Operators of credit card.... Operators of credit card systems should also refer to Subpart D of Part 1010 of this Chapter for...

48 CFR 2413.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Commercial Credit Card Program. [60 FR 46155, Sept. 5, 1995. Redesignated at 64 FR 46095, Aug. 23, 1999] ... purchase card. 2413.301 Section 2413.301 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND... Acquisition Methods 2413.301 Governmentwide commercial purchase card. (c) HUD's procedures concerning the use...

31 CFR 1028.400 - General.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ENFORCEMENT NETWORK, DEPARTMENT OF THE TREASURY RULES FOR OPERATORS OF CREDIT CARD SYSTEMS Records Required To Be Maintained By Operators of Credit Card Systems § 1028.400 General. Operators of credit card.... Operators of credit card systems should also refer to Subpart D of Part 1010 of this Chapter for...

31 CFR 1028.400 - General.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ENFORCEMENT NETWORK, DEPARTMENT OF THE TREASURY RULES FOR OPERATORS OF CREDIT CARD SYSTEMS Records Required To Be Maintained By Operators of Credit Card Systems § 1028.400 General. Operators of credit card.... Operators of credit card systems should also refer to Subpart D of Part 1010 of this Chapter for...

31 CFR 1028.400 - General.

Code of Federal Regulations, 2014 CFR

2014-07-01

... ENFORCEMENT NETWORK, DEPARTMENT OF THE TREASURY RULES FOR OPERATORS OF CREDIT CARD SYSTEMS Records Required To Be Maintained By Operators of Credit Card Systems § 1028.400 General. Operators of credit card.... Operators of credit card systems should also refer to Subpart D of Part 1010 of this Chapter for...

48 CFR 2413.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Commercial Credit Card Program. [60 FR 46155, Sept. 5, 1995. Redesignated at 64 FR 46095, Aug. 23, 1999] ... purchase card. 2413.301 Section 2413.301 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND... Acquisition Methods 2413.301 Governmentwide commercial purchase card. (c) HUD's procedures concerning the use...

48 CFR 2413.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Commercial Credit Card Program. [60 FR 46155, Sept. 5, 1995. Redesignated at 64 FR 46095, Aug. 23, 1999] ... purchase card. 2413.301 Section 2413.301 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND... Acquisition Methods 2413.301 Governmentwide commercial purchase card. (c) HUD's procedures concerning the use...

48 CFR 2413.301 - Governmentwide commercial purchase card.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Commercial Credit Card Program. [60 FR 46155, Sept. 5, 1995. Redesignated at 64 FR 46095, Aug. 23, 1999] ... purchase card. 2413.301 Section 2413.301 Federal Acquisition Regulations System DEPARTMENT OF HOUSING AND... Acquisition Methods 2413.301 Governmentwide commercial purchase card. (c) HUD's procedures concerning the use...

Computer circuit card puller

NASA Technical Reports Server (NTRS)

Sawyer, R. V.; Szuwalski, B. (Inventor)

1981-01-01

The invention generally relates to hand tools, and more particularly to an improved device for facilitating removal of printed circuit cards from a card rack characterized by longitudinal side rails arranged in a mutually spaced parallelism and a plurality of printed circuit cards extended between the rails of the rack.

76 FR 76475 - Employment Network (EN) Report Card

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-07

... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA-2011-0096] Employment Network (EN) Report Card... Work Consumer Employment Network Report Card. SUMMARY: We are soliciting the input of beneficiaries... revised EN Report Card. An EN is a private or public entity that participates in the Ticket to Work (TTW...

Smart Cards for Transit : Multi-Use Remotely Interrogated Stored-Data Cards for Fare and Toll Payment

DOT National Transportation Integrated Search

1995-04-01

This project developed relevant information on existing and future, stored readable/writable data card technology for fare and toll payments. The project supports the FTA objective of developing a plan for a common standard card-based fare payment sy...

Trehalose significantly enhances the recovery of serum and serum exosomal miRNA from a paper-based matrix.

PubMed

Neo, Shu Hui; Chung, Ka Yan; Quek, Jia Min; Too, Heng-Phon

2017-11-30

The preservation of nucleic acids from clinical samples is critical to facilitate accurate molecular diagnosis. The use of a paper matrix, Flinders Technology Associates (FTA) Elute cards, to archive DNA and viral RNA is well-documented. However, the feasibility of FTA Elute cards for archiving serum and serum exosomal microRNAs (miRNAs) remains unclear. Here, we performed a comprehensive evaluation of FTA Elute cards for miRNA storage and recovery in different pre-analytical conditions. The recovery of serum miRNA dry-spotted on FTA Elute cards by direct elution with water at high temperature was poor. However, serum miRNAs dry-spotted on the cards were isolated with about 40% yield when using QIAzol lysis reagent and recovery was improved remarkably (>80%) upon extraction from cards pre-treated with trehalose. miRNAs stored on the cards remained stable at room temperature and can be kept for prolonged periods. Furthermore, miRNAs could be similarly recovered from serum exosomes dry-spotted on the cards. Importantly, when using sera from gastric cancer (GC) patients, the miRNAs were efficiently recovered from trehalose pre-treated cards without affecting their representation. Collectively, we have demonstrated the potential of FTA Elute cards to archive serum and serum exosomal miRNAs, making it useful for biomarker discovery and diagnostics.

WASP (Write a Scientific Paper) using Excel - 2: Pivot tables.

PubMed

Grech, Victor

2018-02-01

Data analysis at the descriptive stage and the eventual presentation of results requires the tabulation and summarisation of data. This exercise should always precede inferential statistics. Pivot tables and pivot charts are one of Excel's most powerful and underutilised features, with tabulation functions that immensely facilitate descriptive statistics. Pivot tables permit users to dynamically summarise and cross-tabulate data, create tables in several dimensions, offer a range of summary statistics and can be modified interactively with instant outputs. Large and detailed datasets are thereby easily manipulated making pivot tables arguably the best way to explore, summarise and present data from many different angles. This second paper in the WASP series in Early Human Development provides pointers for pivot table manipulation in Excel™. Copyright © 2018 Elsevier B.V. All rights reserved.

Expansion of Tabulated Scattering Matrices in Generalized Spherical Functions

NASA Technical Reports Server (NTRS)

Mishchenko, Michael I.; Geogdzhayev, Igor V.; Yang, Ping

2016-01-01

An efficient way to solve the vector radiative transfer equation for plane-parallel turbid media is to Fourier-decompose it in azimuth. This methodology is typically based on the analytical computation of the Fourier components of the phase matrix and is predicated on the knowledge of the coefficients appearing in the expansion of the normalized scattering matrix in generalized spherical functions. Quite often the expansion coefficients have to be determined from tabulated values of the scattering matrix obtained from measurements or calculated by solving the Maxwell equations. In such cases one needs an efficient and accurate computer procedure converting a tabulated scattering matrix into the corresponding set of expansion coefficients. This short communication summarizes the theoretical basis of this procedure and serves as the user guide to a simple public-domain FORTRAN program.

Prevention of Information Leakage by Photo-Coupling in Smart Card

NASA Astrophysics Data System (ADS)

Shen, Sung-Shiou; Chiu, Jung-Hui

Advances in smart card technology encourages smart card use in more sensitive applications, such as storing important information and securing application. Smart cards are however vulnerable to side channel attacks. Power consumption and electromagnetic radiation of the smart card can leak information about the secret data protected by the smart card. Our paper describes two possible hardware countermeasures that protect against side channel information leakage. We show that power analysis can be prevented by adopting photo-coupling techniques. This method involves the use of LED with photovoltaic cells and photo-couplers on the power, reset, I/O and clock lines of the smart card. This method reduces the risk of internal data bus leakage on the external data lines. Moreover, we also discuss the effectiveness of reducing electromagnetic radiation by using embedded metal plates.

Quantum key distribution using card, base station and trusted authority

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nordholt, Jane E.; Hughes, Richard John; Newell, Raymond Thorson

Techniques and tools for quantum key distribution ("QKD") between a quantum communication ("QC") card, base station and trusted authority are described herein. In example implementations, a QC card contains a miniaturized QC transmitter and couples with a base station. The base station provides a network connection with the trusted authority and can also provide electric power to the QC card. When coupled to the base station, after authentication by the trusted authority, the QC card acquires keys through QKD with a trust authority. The keys can be used to set up secure communication, for authentication, for access control, or formore » other purposes. The QC card can be implemented as part of a smart phone or other mobile computing device, or the QC card can be used as a fillgun for distribution of the keys.« less

Quantum key distribution using card, base station and trusted authority

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nordholt, Jane Elizabeth; Hughes, Richard John; Newell, Raymond Thorson

Techniques and tools for quantum key distribution ("QKD") between a quantum communication ("QC") card, base station and trusted authority are described herein. In example implementations, a QC card contains a miniaturized QC transmitter and couples with a base station. The base station provides a network connection with the trusted authority and can also provide electric power to the QC card. When coupled to the base station, after authentication by the trusted authority, the QC card acquires keys through QKD with a trusted authority. The keys can be used to set up secure communication, for authentication, for access control, or formore » other purposes. The QC card can be implemented as part of a smart phone or other mobile computing device, or the QC card can be used as a fillgun for distribution of the keys.« less

On Developing HyperCard Stacks for the Study of Chinese Characters: KanjiCard.

ERIC Educational Resources Information Center

Nakajima, Kazuko

1988-01-01

Describes "KanjiCard," an interactive self-tutorial program for beginning students of Japanese to learn Kanji, Chinese characters used in the Japanese language. The Macintosh-developed approach uses "HyperCard" technology, computer-assisted animation, and voice digitizing to achieve enhanced graphic presentation. (Author/CB)

HyperCard--A Science Teaching Tool.

ERIC Educational Resources Information Center

Parker, Carol

1992-01-01

Discussion of new technological resources available for science instruction focuses on the use of the HyperCard software for the Macintosh to design customized materials. Topics addressed include general features of HyperCard, designing HyperCard stacks, graphics, and designing buttons (i.e., links for moving through the stacks). Several sample…

31 CFR 1021.300 - General.

Code of Federal Regulations, 2014 CFR

2014-07-01

... ENFORCEMENT NETWORK, DEPARTMENT OF THE TREASURY RULES FOR CASINOS AND CARD CLUBS Reports Required To Be Made By Casinos and Card Clubs § 1021.300 General. Casinos and card clubs are subject to the reporting requirements set forth and cross referenced in this subpart. Casinos and card clubs should also refer to...

31 CFR 1021.300 - General.

Code of Federal Regulations, 2011 CFR

2011-07-01

... ENFORCEMENT NETWORK, DEPARTMENT OF THE TREASURY RULES FOR CASINOS AND CARD CLUBS Reports Required To Be Made By Casinos and Card Clubs § 1021.300 General. Casinos and card clubs are subject to the reporting requirements set forth and cross referenced in this subpart. Casinos and card clubs should also refer to...

31 CFR 1021.300 - General.

Code of Federal Regulations, 2012 CFR

2012-07-01

... ENFORCEMENT NETWORK, DEPARTMENT OF THE TREASURY RULES FOR CASINOS AND CARD CLUBS Reports Required To Be Made By Casinos and Card Clubs § 1021.300 General. Casinos and card clubs are subject to the reporting requirements set forth and cross referenced in this subpart. Casinos and card clubs should also refer to...

31 CFR 1021.300 - General.

Code of Federal Regulations, 2013 CFR

2013-07-01

... ENFORCEMENT NETWORK, DEPARTMENT OF THE TREASURY RULES FOR CASINOS AND CARD CLUBS Reports Required To Be Made By Casinos and Card Clubs § 1021.300 General. Casinos and card clubs are subject to the reporting requirements set forth and cross referenced in this subpart. Casinos and card clubs should also refer to...

Credit Cards: What You Don't Know Can Cost You!

ERIC Educational Resources Information Center

Detweiler, Gerri

1993-01-01

The role of credit cards in personal finance has increased dramatically over the past two decades. Complex interest computation methods and additional fees often boost the price of credit card loans and help make credit cards the most profitable type of consumer loan for many lenders. (Author/JOW)

48 CFR 32.1102 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... specified EFT mechanisms. Governmentwide commercial purchase card means a card that is similar in nature to a commercial credit card that is used to make financing and delivery payments for supplies and services. The purchase card is an EFT method and it may be used as a means to meet the requirement to pay...

77 FR 75410 - Request for Information Regarding Credit Card Market

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-20

... Regarding Credit Card Market AGENCY: Bureau of Consumer Financial Protection. ACTION: Notice and request for information. SUMMARY: Section 502(a) of the Credit Card Accountability Responsibility and Disclosure Act of... review (Review) of the consumer credit card market, within the limits of its existing resources available...

Emerging Technology for School Security

ERIC Educational Resources Information Center

Doss, Kevin T.

2012-01-01

Locks and keys ring up huge costs for education institutions. No wonder many facility directors and public-safety directors have turned to automated access-control systems with magnetic-stripe cards, proximity cards and, most recently, smart cards. Smart cards can provide a host of on- and off-campus services beyond security. In addition to…