Real gas flow fields about three dimensional configurations

NASA Technical Reports Server (NTRS)

Balakrishnan, A.; Lombard, C. K.; Davy, W. C.

1983-01-01

Real gas, inviscid supersonic flow fields over a three-dimensional configuration are determined using a factored implicit algorithm. Air in chemical equilibrium is considered and its local thermodynamic properties are computed by an equilibrium composition method. Numerical solutions are presented for both real and ideal gases at three different Mach numbers and at two different altitudes. Selected results are illustrated by contour plots and are also tabulated for future reference. Results obtained compare well with existing tabulated numerical solutions and hence validate the solution technique.

Interactive specification acquisition via scenarios: A proposal

NASA Technical Reports Server (NTRS)

Hall, Robert J.

1992-01-01

Some reactive systems are most naturally specified by giving large collections of behavior scenarios. These collections not only specify the behavior of the system, but also provide good test suites for validating the implemented system. Due to the complexity of the systems and the number of scenarios, however, it appears that automated assistance is necessary to make this software development process workable. Interactive Specification Acquisition Tool (ISAT) is a proposed interactive system for supporting the acquisition and maintenance of a formal system specification from scenarios, as well as automatic synthesis of control code and automated test generation. This paper discusses the background, motivation, proposed functions, and implementation status of ISAT.

SmallSats, Iodine Propulsion Technology, Applications to Low-Cost Lunar Missions, and the Iodine Satellite (iSAT) Project

NASA Technical Reports Server (NTRS)

Dankanich, John W.

2014-01-01

Closing Remarks: ?(1) SmallSats hold significant potential for future low cost high value missions; (2) Propulsion remains a key limiting capability for SmallSats that Iodine can address: High ISP * Density for volume constrained spacecraft; Indefinite quiescence, unpressurized and non-hazardous as a secondary payload; (3) Iodine enables MicroSat and SmallSat maneuverability: Enables transfer into high value orbits, constellation deployment and deorbit; (4) Iodine may enable a new class of planetary and exploration class missions: Enables GTO launched secondary spacecraft to transit to the moon, asteroids, and other interplanetary destinations for approximately 150 million dollars full life cycle cost including the launch; (5) ESPA based OTVs are also volume constrained and a shift from xenon to iodine can significantly increase the transfer vehicle change in volume capability including transfers from GTO to a range of Lunar Orbits; (6) The iSAT project is a fast pace high value iodine Hall technology demonstration mission: Partnership with NASA GRC and NASA MSFC with industry partner - Busek; (7) The iSAT mission is an approved project with PDR in November of 2014 and is targeting a flight opportunity in FY17.

The Mendeleev-Meyer force project.

PubMed

Santos, Sergio; Lai, Chia-Yun; Amadei, Carlo A; Gadelrab, Karim R; Tang, Tzu-Chieh; Verdaguer, Albert; Barcons, Victor; Font, Josep; Colchero, Jaime; Chiesa, Matteo

2016-10-14

Here we present the Mendeleev-Meyer Force Project which aims at tabulating all materials and substances in a fashion similar to the periodic table. The goal is to group and tabulate substances using nanoscale force footprints rather than atomic number or electronic configuration as in the periodic table. The process is divided into: (1) acquiring nanoscale force data from materials, (2) parameterizing the raw data into standardized input features to generate a library, (3) feeding the standardized library into an algorithm to generate, enhance or exploit a model to identify a material or property. We propose producing databases mimicking the Materials Genome Initiative, the Medical Literature Analysis and Retrieval System Online (MEDLARS) or the PRoteomics IDEntifications database (PRIDE) and making these searchable online via search engines mimicking Pubmed or the PRIDE web interface. A prototype exploiting deep learning algorithms, i.e. multilayer neural networks, is presented.

Thermal Analysis of Iodine Satellite (iSAT)

NASA Technical Reports Server (NTRS)

Mauro, Stephanie

2015-01-01

This paper presents the progress of the thermal analysis and design of the Iodine Satellite (iSAT). The purpose of the iSAT spacecraft (SC) is to demonstrate the ability of the iodine Hall Thruster propulsion system throughout a one year mission in an effort to mature the system for use on future satellites. The benefit of this propulsion system is that it uses a propellant, iodine, that is easy to store and provides a high thrust-to-mass ratio. The spacecraft will also act as a bus for an earth observation payload, the Long Wave Infrared (LWIR) Camera. Four phases of the mission, determined to either be critical to achieving requirements or phases of thermal concern, are modeled. The phases are the Right Ascension of the Ascending Node (RAAN) Change, Altitude Reduction, De-Orbit, and Science Phases. Each phase was modeled in a worst case hot environment and the coldest phase, the Science Phase, was also modeled in a worst case cold environment. The thermal environments of the spacecraft are especially important to model because iSAT has a very high power density. The satellite is the size of a 12 unit cubesat, and dissipates slightly more than 75 Watts of power as heat at times. The maximum temperatures for several components are above their maximum operational limit for one or more cases. The analysis done for the first Design and Analysis Cycle (DAC1) showed that many components were above or within 5 degrees Centigrade of their maximum operation limit. The battery is a component of concern because although it is not over its operational temperature limit, efficiency greatly decreases if it operates at the currently predicted temperatures. In the second Design and Analysis Cycle (DAC2), many steps were taken to mitigate the overheating of components, including isolating several high temperature components, removal of components, and rearrangement of systems. These changes have greatly increased the thermal margin available.

Analysis of the Command and Control Segment (CCS) attitude estimation algorithm

NASA Technical Reports Server (NTRS)

Stockwell, Catherine

1993-01-01

This paper categorizes the qualitative behavior of the Command and Control Segment (CCS) differential correction algorithm as applied to attitude estimation using simultaneous spin axis sun angle and Earth cord length measurements. The categories of interest are the domains of convergence, divergence, and their boundaries. Three series of plots are discussed that show the dependence of the estimation algorithm on the vehicle radius, the sun/Earth angle, and the spacecraft attitude. Common qualitative dynamics to all three series are tabulated and discussed. Out-of-limits conditions for the estimation algorithm are identified and discussed.

Gate length scaling optimization of FinFETs

NASA Astrophysics Data System (ADS)

Chen, Shoumian; Shang, Enming; Hu, Shaojian

2018-06-01

This paper introduces a device performance optimization approach for the FinFET through optimization of the gate length. As a result of reducing the gate length, the leakage current (Ioff) increases, and consequently, the stress along the channel enhances which leads to an increase in the drive current (Isat) of the PMOS. In order to sustain Ioff, work function is adjusted to offset the effect of the increased stress. Changing the gate length of the transistor yields different drive currents when the leakage current is fixed by adjusting the work function. For a given device, an optimal gate length is found to provide the highest drive current. As an example, for a standard performance device with Ioff = 1 nA/um, the best performance Isat = 856 uA/um is at L = 34 nm for 14 nm FinFET and Isat = 1130 uA/um at L = 21 nm for 7 nm FinFET. A 7 nm FinFET will exhibit performance boost of 32% comparing with 14 nm FinFET. However, applying the same method to a 5 nm FinFET, the performance boosting is out of expectance comparing to the 7 nm FinFET, which is due to the severe short-channel-effect and the exhausted channel stress in the FinFET.

Iodine Satellite

NASA Technical Reports Server (NTRS)

Kamhawi, Hani; Dankanich, John; Martinez, Andres; Petro, Andrew

2015-01-01

The Iodine Satellite (iSat) spacecraft will be the first CubeSat to demonstrate high change in velocity from a primary propulsion system by using Hall thruster technology and iodine as a propellant. The mission will demonstrate CubeSat maneuverability, including plane change, altitude change and change in its closest approach to Earth to ensure atmospheric reentry in less than 90 days. The mission is planned for launch in fall 2017. Hall thruster technology is a type of electric propulsion. Electric propulsion uses electricity, typically from solar panels, to accelerate the propellant. Electric propulsion can accelerate propellant to 10 times higher velocities than traditional chemical propulsion systems, which significantly increases fuel efficiency. To enable the success of the propulsion subsystem, iSat will also demonstrate power management and thermal control capabilities well beyond the current state-of-the-art for spacecraft of its size. This technology is a viable primary propulsion system that can be used on small satellites ranging from about 22 pounds (10 kilograms) to more than 1,000 pounds (450 kilograms). iSat's fuel efficiency is ten times greater and its propulsion per volume is 100 times greater than current cold-gas systems and three times better than the same system operating on xenon. iSat's iodine propulsion system consists of a 200 watt (W) Hall thruster, a cathode, a tank to store solid iodine, a power processing unit (PPU) and the feed system to supply the iodine. This propulsion system is based on a 200 W Hall thruster developed by Busek Co. Inc., which was previously flown using xenon as the propellant. Several improvements have been made to the original system to include a compact PPU, targeting greater than 80 percent reduction in mass and volume of conventional PPU designs. The cathode technology is planned to enable heaterless cathode conditioning, significantly increasing total system efficiency. The feed system has been designed to include iodine compatible control valves with internal heaters and temperature sensors to coincide with the iodine-compatible thruster. A key advantage to using iodine as a propellant is that it may be stored in the tank as an unpressurized solid on the ground and before flight operations. During operations, the tank is heated to vaporize the propellant. Iodine vapor is then routed through custom flow control valves to control mass flow to the thruster and cathode assembly. The thruster then ionizes the vapor and accelerates it via magnetic and electrostatic fields, resulting in high specific impulse, characteristic of a highly efficient propulsion system. The iSat spacecraft is a 12-unit (12U) CubeSat with dimensions of about 8 inches x 8 inches x 12 inches (20 centimeters x 20 centimeters x 30 centimeters). The spacecraft frame will be constructed from aluminum with a finish to prevent iodine-driven corrosion. The iSat spacecraft includes full three-axis control and will leverage heat generated by spacecraft components and radiators for a passive thermal control system. After the CubeSat has successfully detached from its launch vehicle, it will deploy its solar panels, correct for tip-off and maintain attitude control before ground contact. An initial check-out period of two weeks is planned for testing all subsystems. The spacecraft will charge the power system while in sunlight, using momentum wheels and magnetic torque rods to rotate the vehicle to the required attitude.

Improvements on the minimax algorithm for the Laplace transformation of orbital energy denominators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Helmich-Paris, Benjamin, E-mail: b.helmichparis@vu.nl; Visscher, Lucas, E-mail: l.visscher@vu.nl

2016-09-15

We present a robust and non-heuristic algorithm that finds all extremum points of the error distribution function of numerically Laplace-transformed orbital energy denominators. The extremum point search is one of the two key steps for finding the minimax approximation. If pre-tabulation of initial guesses is supposed to be avoided, strategies for a sufficiently robust algorithm have not been discussed so far. We compare our non-heuristic approach with a bracketing and bisection algorithm and demonstrate that 3 times less function evaluations are required altogether when applying it to typical non-relativistic and relativistic quantum chemical systems.

Mathematical and Statistical Software Index.

DTIC Science & Technology

1986-08-01

geometric) mean HMEAN - harmonic mean MEDIAN - median MODE - mode QUANT - quantiles OGIVE - distribution curve IQRNG - interpercentile range RANGE ... range mutliphase pivoting algorithm cross-classification multiple discriminant analysis cross-tabul ation mul tipl e-objecti ve model curve fitting...Statistics). .. .. .... ...... ..... ...... ..... .. 21 *RANGEX (Correct Correlations for Curtailment of Range ). .. .. .... ...... ... 21 *RUMMAGE II (Analysis

External Threat Risk Assessment Algorithm (ExTRAA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Powell, Troy C.

Two risk assessment algorithms and philosophies have been augmented and combined to form a new algorit hm, the External Threat Risk Assessment Algorithm (ExTRAA), that allows for effective and statistically sound analysis of external threat sources in relation to individual attack methods . In addition to the attack method use probability and the attack method employment consequence, t he concept of defining threat sources is added to the risk assessment process. Sample data is tabulated and depicted in radar plots and bar graphs for algorithm demonstration purposes. The largest success of ExTRAA is its ability to visualize the kind ofmore » r isk posed in a given situation using the radar plot method.« less

The Iodine Satellite (iSat) Project Development Towards Critical Design Review

NASA Technical Reports Server (NTRS)

Dankanich, John W.; Calvert, Derek; Kamhawi, Hani; Hickman, Tyler; Szabo, James; Byrne, Lawrence

2015-01-01

Despite the prevalence of small satellites in recent years, the systems flown to date have very limited propulsion capability. SmallSats are typically secondary payloads and have significant constraints for volume, mass, and power in addition to limitations on the use of hazardous propellants or stored energy. These constraints limit the options for SmallSat maneuverability. NASA's Space Technology Mission Directorate approved the iodine Satellite flight project for a rapid demonstration of iodine Hall thruster technology in a 12U (cubesat units) configuration under the Small Spacecraft Technology Program. The mission is a partnership between NASA MSFC, NASA GRC, and Busek Co, Inc., with the Air Force supporting the propulsion technology maturation. The team is working towards the critical design review in the final design and fabrication phase of the project. The current design shows positive technical performance margins in all areas. The iSat project is planned for launch readiness in the spring of 2017.

Iodine Satellite

NASA Technical Reports Server (NTRS)

Dankanich, John; Kamhawi, Hani; Szabo, James

2015-01-01

This project is a collaborative effort to mature an iodine propulsion system while reducing risk and increasing fidelity of a technology demonstration mission concept. 1 The FY 2014 tasks include investments leveraged throughout NASA, from multiple mission directorates, as a partnership with NASA Glenn Research Center (GRC), a NASA Marshall Space Flight Center (MSFC) Technology Investment Project, and an Air Force partnership. Propulsion technology is often a critical enabling technology for space missions. NASA is investing in technologies to enable high value missions with very small and low-cost spacecraft, even CubeSats. However, these small spacecraft currently lack any appreciable propulsion capability. CubeSats are typically deployed and drift without any ability to transfer to higher value orbits, perform orbit maintenance, or deorbit. However, the iodine Hall system can allow the spacecraft to transfer into a higher value science orbit. The iodine satellite (iSAT) will be able to achieve a (Delta)V of >500 m/s with <1 kg of solid iodine propellant, which can be stored in an unpressurized benign state prior to launch. The iSAT propulsion system consists of the 200 W Hall thruster, solid iodine propellant tank, a power processing unit, and the necessary valves and tubing to route the iodine vapor. The propulsion system is led by GRC, with critical hardware provided by the Busek Co. The propellant tank begins with solid iodine unpressurized on the ground and in-flight before operations, which is then heated via tank heaters to a temperature at which solid iodine sublimates to iodine vapor. The vapor is then routed through tubing and custom valves to control mass flow to the thruster and cathode assembly. 2 The thruster then ionizes the vapor and accelerates it via magnetic and electrostatic fields, resulting in thrust with a specific impulse >1,300 s. The iSAT spacecraft, illustrated in figure 1, is currently a 12U CubeSat. The spacecraft chassis will be constructed from aluminum with a finish to prevent iodine-driven corrosion. The iSAT spacecraft includes full three-axis control using wheels, magnetic torque rods, inertial management unit, and a suite of sensors and optics. The spacecraft will leverage heat generated by spacecraft components and radiators for a passive thermal control system.

Immigration and Its Effect on the College-Going Outcomes of Natives

ERIC Educational Resources Information Center

Neymotin, Florence

2009-01-01

In this paper, I analyze immigration's effect on the SAT-scores and college application patterns of high school students in California and Texas. The student-level dataset used is longitudinal in nature and is matched via a unique algorithm to the Census 2000 summary tabulation files to determine immigration at the local census-place level. The…

The Iodine Satellite (iSat) Project Development Towards Critical Design Review (CDR)

NASA Technical Reports Server (NTRS)

Dankanich, John W.; Selby, Michael; Polzin, Kurt A.; Kamhawi, Hani; Hickman, Tyler; Byrne, Larry

2016-01-01

Despite the prevalence of Small Satellites in recent years, the systems flown to date have very limited propulsion capability. SmallSats are typically secondary payloads and have significant constraints for volume, mass, and power in addition to limitations on the use of hazardous propellants or stored energy (i.e. high pressure vessels). These constraints limit the options for SmallSat maneuverability. NASA's Space Technology Mission Directorate approved the iodine Satellite flight project for a rapid demonstration of iodine Hall thruster technology in a 12U configuration under the Small Spacecraft Technology Program. The project formally began in FY15 as a partnership between NASA MSFC, NASA GRC, and Busek Co, Inc., with the Air Force supporting the propulsion technology maturation. The team is in final preparation of the Critical Design Review prior to initiating the fabrication and integration phase of the project. The iSat project is on schedule for a launch opportunity in November 2017.

Iowa satellite project ISAT-1

NASA Technical Reports Server (NTRS)

1993-01-01

Satellite systems to date have been mainly scientific in nature. Only a few systems have been of direct use to the public such as for telephone or television transmission. Space enterprises have remained a mystery to the general public and beyond the reach of the small business community. The result is a less than supportive public when it comes to space activities. The purpose of the ISAT-1 program is to develop a small and relatively inexpensive satellite that will serve the State of Iowa, primarily for educational purposes. It will provide products, services, and activities that will be educational, practical, and useful for a large number for people. The emphasis is on public awareness, 'space literacy', and routine practical applications rather than high technology. The initial conceptual design phase was complete when the current team took over the project. Some areas of the conceptual design were taken a little farther, but for the most part this team started at the detailed design stage.

Radicalization, Linkage, and Diversity: Current Trends in Terrorism in Europe

DTIC Science & Technology

2011-01-01

Restaurant in Exeter Only the attacker was injured Independent June 2008 Nicholas Roddis United Kingdom Unknown Attacker arrested Independent August...is evolving into a sort of franchise organ- isation, which acts as a point of reference for independent terrorist groups or individuals.5 Sageman’s

Parametric classification of handvein patterns based on texture features

NASA Astrophysics Data System (ADS)

Al Mahafzah, Harbi; Imran, Mohammad; Supreetha Gowda H., D.

2018-04-01

In this paper, we have developed Biometric recognition system adopting hand based modality Handvein,which has the unique pattern for each individual and it is impossible to counterfeit and fabricate as it is an internal feature. We have opted in choosing feature extraction algorithms such as LBP-visual descriptor, LPQ-blur insensitive texture operator, Log-Gabor-Texture descriptor. We have chosen well known classifiers such as KNN and SVM for classification. We have experimented and tabulated results of single algorithm recognition rate for Handvein under different distance measures and kernel options. The feature level fusion is carried out which increased the performance level.

Radiant{trademark} Liquid Radioisotope Intravascular Radiation Therapy System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eigler, N.; Whiting, J.; Chernomorsky, A.

1998-01-16

RADIANT{trademark} is manufactured by United States Surgical Corporation, Vascular Therapies Division, (formerly Progressive Angioplasty Systems). The system comprises a liquid {beta}-radiation source, a shielded isolation/transfer device (ISAT), modified over-the-wire or rapid exchange delivery balloons, and accessory kits. The liquid {beta}-source is Rhenium-188 in the form of sodium perrhenate (NaReO{sub 4}), Rhenium-188 is primarily a {beta}-emitter with a physical half-life of 17.0 hours. The maximum energy of the {beta}-particles is 2.1 MeV. The source is produced daily in the nuclear pharmacy hot lab by eluting a Tungsten-188/Rhenium-188 generator manufactured by Oak Ridge National Laboratory (ORNL). Using anion exchange columns and Milliporemore » filters the effluent is concentrated to approximately 100 mCi/ml, calibrated, and loaded into the (ISAT) which is subsequently transported to the cardiac catheterization laboratory. The delivery catheters are modified Champion{trademark} over-the-wire, and TNT{trademark} rapid exchange stent delivery balloons. These balloons have thickened polyethylene walls to augment puncture resistance; dual radio-opaque markers and specially configured connectors.« less

Comparative measurements of plasma potential with ball-pen and Langmuir probe in low-temperature magnetized plasma

NASA Astrophysics Data System (ADS)

Zanáška, M.; Adámek, J.; Peterka, M.; Kudrna, P.; Tichý, M.

2015-03-01

The ball-pen probe (BPP) is used for direct plasma potential measurements in magnetized plasma. The probe can adjust the ratio of the electron and ion saturation currents Isat-/Isat+ to be close to one and therefore its I-V characteristic becomes nearly symmetric. If this is achieved, the floating potential of the BPP is close to the plasma potential. Because of its rather simple construction, it offers an attractive probe for measurements in magnetized plasma. Comparative measurements of plasma potential by BPPs of different dimensions as well as one Langmuir probe (LP) in an argon discharge plasma of a cylindrical magnetron were performed at various experimental conditions. An additional comparison by an emissive probe was also performed. All these types of probes provide similar values of plasma potential in a wide range of plasma parameters. Our results for three different BPP dimensions indicate that the BPP can be operated in a cylindrical magnetron DC argon discharge if the value of the ratio of the magnetic field and neutral gas pressure, B/p, is greater than approximately 10 mT/Pa.

Generation of optimal artificial neural networks using a pattern search algorithm: application to approximation of chemical systems.

PubMed

Ihme, Matthias; Marsden, Alison L; Pitsch, Heinz

2008-02-01

A pattern search optimization method is applied to the generation of optimal artificial neural networks (ANNs). Optimization is performed using a mixed variable extension to the generalized pattern search method. This method offers the advantage that categorical variables, such as neural transfer functions and nodal connectivities, can be used as parameters in optimization. When used together with a surrogate, the resulting algorithm is highly efficient for expensive objective functions. Results demonstrate the effectiveness of this method in optimizing an ANN for the number of neurons, the type of transfer function, and the connectivity among neurons. The optimization method is applied to a chemistry approximation of practical relevance. In this application, temperature and a chemical source term are approximated as functions of two independent parameters using optimal ANNs. Comparison of the performance of optimal ANNs with conventional tabulation methods demonstrates equivalent accuracy by considerable savings in memory storage. The architecture of the optimal ANN for the approximation of the chemical source term consists of a fully connected feedforward network having four nonlinear hidden layers and 117 synaptic weights. An equivalent representation of the chemical source term using tabulation techniques would require a 500 x 500 grid point discretization of the parameter space.

An optical systems analysis approach to image resampling

NASA Technical Reports Server (NTRS)

Lyon, Richard G.

1997-01-01

All types of image registration require some type of resampling, either during the registration or as a final step in the registration process. Thus the image(s) must be regridded into a spatially uniform, or angularly uniform, coordinate system with some pre-defined resolution. Frequently the ending resolution is not the resolution at which the data was observed with. The registration algorithm designer and end product user are presented with a multitude of possible resampling methods each of which modify the spatial frequency content of the data in some way. The purpose of this paper is threefold: (1) to show how an imaging system modifies the scene from an end to end optical systems analysis approach, (2) to develop a generalized resampling model, and (3) empirically apply the model to simulated radiometric scene data and tabulate the results. A Hanning windowed sinc interpolator method will be developed based upon the optical characterization of the system. It will be discussed in terms of the effects and limitations of sampling, aliasing, spectral leakage, and computational complexity. Simulated radiometric scene data will be used to demonstrate each of the algorithms. A high resolution scene will be "grown" using a fractal growth algorithm based on mid-point recursion techniques. The result scene data will be convolved with a point spread function representing the optical response. The resultant scene will be convolved with the detection systems response and subsampled to the desired resolution. The resultant data product will be subsequently resampled to the correct grid using the Hanning windowed sinc interpolator and the results and errors tabulated and discussed.

Idaho Percentile Results for the SBAC English Language Arts and Mathematics Tests, 2015-2017, Grades 3-8 and 10

ERIC Educational Resources Information Center

Stoneberg, Bert D.

2018-01-01

Idaho uses the English Language Arts and Mathematics tests from the Smarter Balanced Assessment Consortium (SBAC) for the Idaho Standard Achievement Tests. ISAT results have been reported almost exclusively as "percent proficient or above" statistics (i.e., the percentage of Idaho students who performed at the "A" level). This…

Idaho Region IV Fourth-Grade Teachers' Perceptions about the Educational Influence of Idaho State Achievement Standards and the Idaho State Achievement Tests

ERIC Educational Resources Information Center

Wiggins, Annette Marie

2010-01-01

The purpose of this study was to explore Idaho Region IV fourth-grade teachers' perceptions regarding the educational influence of Idaho State Achievement Standards and the Idaho Standards Achievement Tests (ISAT) in language usage, reading, and math. Differences between subgroups based on teacher/school demographics, specifically, teachers'…

Characterisation of edge turbulence in relation to edge magnetic field configuration in L-mode plasmas in the Mega Amp Spherical Tokamak.

NASA Astrophysics Data System (ADS)

Dewhurst, J.; Hnat, B.; Dudson, B.; Dendy, R. O.; Counsell, G. F.; Kirk, A.

2007-12-01

Almost all astrophysical and magnetically confined fusion plasmas are turbulent. Here, we examine ion saturation current (Isat) measurements of edge plasma turbulence for three MAST L-mode plasmas that differ primarily in their edge magnetic field configurations. First, absolute moments of the coarse grained data are examined to obtain accurate values of scaling exponents. The dual scaling behaviour is identified in all samples, with the temporal scale τ ≍ 40-60 μs separating the two regimes. Strong universality is then identified in the functional form of the probability density function (PDF) for Isat fluctuations, which is well approximated by the Fréchet distribution on temporal scales τ ≤ 40μs. For temporal scales τ > 40μs, the PDFs appear to converge to the Gumbel distribution, which has been previously identified as a universal feature of many other complex phenomena. The optimal fitting parameters k=1.15 for Fréchet and a=1.35 for Gumbel provide a simple quantitative characterisation of the full spectrum of fluctuations. We conclude that, to good approximation, the properties of the edge turbulence are independent of the edge magnetic field configuration.

Characterization of edge turbulence in relation to edge magnetic field configuration in Ohmic L-mode plasmas in the Mega Amp Spherical Tokamak

NASA Astrophysics Data System (ADS)

Hnat, B.; Dudson, B. D.; Dendy, R. O.; Counsell, G. F.; Kirk, A.; MAST Team

2008-08-01

Ion saturation current (Isat) measurements of edge plasma turbulence are analysed for six MAST L-mode plasmas that differ primarily in their edge magnetic field configurations. The analysis techniques are designed to capture the strong nonlinearities of the datasets. First, absolute moments of the data are examined to obtain accurate values of scaling exponents. This confirms dual scaling behaviour in all samples, with the temporal scale τ ≈ 40-60 µs separating the two regimes. Strong universality is then identified in the functional form of the probability density function (PDF) for Isat fluctuations, which is well approximated by the Fréchet distribution on temporal scales τ <= 40 µs. For temporal scales τ > 40 µs, the PDFs appear to converge to the Gumbel distribution, which has been previously identified as a universal feature of many other complex phenomena. The optimal fitting parameters k = 1.15 for Fréchet and a = 1.35 for Gumbel provide a simple quantitative characterization of the full spectrum of fluctuations. It is concluded that, to good approximation, the properties of the edge turbulence are independent of the edge magnetic field configuration.

Algorithm for Lossless Compression of Calibrated Hyperspectral Imagery

NASA Technical Reports Server (NTRS)

Kiely, Aaron B.; Klimesh, Matthew A.

2010-01-01

A two-stage predictive method was developed for lossless compression of calibrated hyperspectral imagery. The first prediction stage uses a conventional linear predictor intended to exploit spatial and/or spectral dependencies in the data. The compressor tabulates counts of the past values of the difference between this initial prediction and the actual sample value. To form the ultimate predicted value, in the second stage, these counts are combined with an adaptively updated weight function intended to capture information about data regularities introduced by the calibration process. Finally, prediction residuals are losslessly encoded using adaptive arithmetic coding. Algorithms of this type are commonly tested on a readily available collection of images from the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) hyperspectral imager. On the standard calibrated AVIRIS hyperspectral images that are most widely used for compression benchmarking, the new compressor provides more than 0.5 bits/sample improvement over the previous best compression results. The algorithm has been implemented in Mathematica. The compression algorithm was demonstrated as beneficial on 12-bit calibrated AVIRIS images.

Unified selective sorting approach to analyse multi-electrode extracellular data

NASA Astrophysics Data System (ADS)

Veerabhadrappa, R.; Lim, C. P.; Nguyen, T. T.; Berk, M.; Tye, S. J.; Monaghan, P.; Nahavandi, S.; Bhatti, A.

2016-06-01

Extracellular data analysis has become a quintessential method for understanding the neurophysiological responses to stimuli. This demands stringent techniques owing to the complicated nature of the recording environment. In this paper, we highlight the challenges in extracellular multi-electrode recording and data analysis as well as the limitations pertaining to some of the currently employed methodologies. To address some of the challenges, we present a unified algorithm in the form of selective sorting. Selective sorting is modelled around hypothesized generative model, which addresses the natural phenomena of spikes triggered by an intricate neuronal population. The algorithm incorporates Cepstrum of Bispectrum, ad hoc clustering algorithms, wavelet transforms, least square and correlation concepts which strategically tailors a sequence to characterize and form distinctive clusters. Additionally, we demonstrate the influence of noise modelled wavelets to sort overlapping spikes. The algorithm is evaluated using both raw and synthesized data sets with different levels of complexity and the performances are tabulated for comparison using widely accepted qualitative and quantitative indicators.

Unified selective sorting approach to analyse multi-electrode extracellular data

PubMed Central

Veerabhadrappa, R.; Lim, C. P.; Nguyen, T. T.; Berk, M.; Tye, S. J.; Monaghan, P.; Nahavandi, S.; Bhatti, A.

2016-01-01

Extracellular data analysis has become a quintessential method for understanding the neurophysiological responses to stimuli. This demands stringent techniques owing to the complicated nature of the recording environment. In this paper, we highlight the challenges in extracellular multi-electrode recording and data analysis as well as the limitations pertaining to some of the currently employed methodologies. To address some of the challenges, we present a unified algorithm in the form of selective sorting. Selective sorting is modelled around hypothesized generative model, which addresses the natural phenomena of spikes triggered by an intricate neuronal population. The algorithm incorporates Cepstrum of Bispectrum, ad hoc clustering algorithms, wavelet transforms, least square and correlation concepts which strategically tailors a sequence to characterize and form distinctive clusters. Additionally, we demonstrate the influence of noise modelled wavelets to sort overlapping spikes. The algorithm is evaluated using both raw and synthesized data sets with different levels of complexity and the performances are tabulated for comparison using widely accepted qualitative and quantitative indicators. PMID:27339770

Lidar Ratios for Dust Aerosols Derived From Retrievals of CALIPSO Visible Extinction Profiles Constrained by Optical Depths from MODIS-Aqua and CALIPSO/CloudSat Ocean Surface Reflectance Measurements

NASA Technical Reports Server (NTRS)

Young, Stuart A.; Josset, Damien B.; Vaughan, Mark A.

2010-01-01

CALIPSO's (Cloud Aerosol Lidar Infrared Pathfinder Satellite Observations) analysis algorithms generally require the use of tabulated values of the lidar ratio in order to retrieve aerosol extinction and optical depth from measured profiles of attenuated backscatter. However, for any given time or location, the lidar ratio for a given aerosol type can differ from the tabulated value. To gain some insight as to the extent of the variability, we here calculate the lidar ratio for dust aerosols using aerosol optical depth constraints from two sources. Daytime measurements are constrained using Level 2, Collection 5, 550-nm aerosol optical depth measurements made over the ocean by the MODIS (Moderate Resolution Imaging Spectroradiometer) on board the Aqua satellite, which flies in formation with CALIPSO. We also retrieve lidar ratios from night-time profiles constrained by aerosol column optical depths obtained by analysis of CALIPSO and CloudSat backscatter signals from the ocean surface.

The effect of lossy image compression on image classification

NASA Technical Reports Server (NTRS)

Paola, Justin D.; Schowengerdt, Robert A.

1995-01-01

We have classified four different images, under various levels of JPEG compression, using the following classification algorithms: minimum-distance, maximum-likelihood, and neural network. The training site accuracy and percent difference from the original classification were tabulated for each image compression level, with maximum-likelihood showing the poorest results. In general, as compression ratio increased, the classification retained its overall appearance, but much of the pixel-to-pixel detail was eliminated. We also examined the effect of compression on spatial pattern detection using a neural network.

Development and reliability of an audit tool to assess the school physical activity environment across 12 countries

PubMed Central

Broyles, S T; Drazba, K T; Church, T S; Chaput, J-P; Fogelholm, M; Hu, G; Kuriyan, R; Kurpad, A; Lambert, E V; Maher, C; Maia, J; Matsudo, V; Olds, T; Onywera, V; Sarmiento, O L; Standage, M; Tremblay, M S; Tudor-Locke, C; Zhao, P; Katzmarzyk, P T

2015-01-01

Objectives: Schools are an important setting to enable and promote physical activity. Researchers have created a variety of tools to perform objective environmental assessments (or ‘audits') of other settings, such as neighborhoods and parks; yet, methods to assess the school physical activity environment are less common. The purpose of this study is to describe the approach used to objectively measure the school physical activity environment across 12 countries representing all inhabited continents, and to report on the reliability and feasibility of this methodology across these diverse settings. Methods: The International Study of Childhood Obesity, Lifestyle and the Environment (ISCOLE) school audit tool (ISAT) data collection required an in-depth training (including field practice and certification) and was facilitated by various supporting materials. Certified data collectors used the ISAT to assess the environment of all schools enrolled in ISCOLE. Sites completed a reliability audit (simultaneous audits by two independent, certified data collectors) for a minimum of two schools or at least 5% of their school sample. Item-level agreement between data collectors was assessed with both the kappa statistic and percent agreement. Inter-rater reliability of school summary scores was measured using the intraclass correlation coefficient. Results: Across the 12 sites, 256 schools participated in ISCOLE. Reliability audits were conducted at 53 schools (20.7% of the sample). For the assessed environmental features, inter-rater reliability (kappa) ranged from 0.37 to 0.96; 18 items (42%) were assessed with almost perfect reliability (κ=0.80–0.96), and a further 24 items (56%) were assessed with substantial reliability (κ=0.61–0.79). Likewise, scores that summarized a school's support for physical activity were highly reliable, with the exception of scores assessing aesthetics and perceived suitability of the school grounds for sport, informal games and general play. Conclusions: This study suggests that the ISAT can be used to conduct reliable objective audits of the school physical activity environment across diverse, international school settings. PMID:27152183

Novel Texture-based Visualization Methods for High-dimensional Multi-field Data Sets

DTIC Science & Technology

2013-07-06

project: In standard format showing authors, title, journal, issue, pages, and date, for each category list the following: b) papers published...visual- isation [18]. Novel image acquisition and simulation tech- niques have made is possible to record a large number of co-located data fields...function, structure, anatomical changes, metabolic activity, blood perfusion, and cellular re- modelling. In this paper we investigate texture-based

A new multi-line cusp magnetic field plasma device (MPD) with variable magnetic field.

PubMed

Patel, A D; Sharma, M; Ramasubramanian, N; Ganesh, R; Chattopadhyay, P K

2018-04-01

A new multi-line cusp magnetic field plasma device consisting of electromagnets with core material has been constructed with a capability to experimentally control the relative volume fractions of magnetized to unmagnetized plasma volume as well as accurate control on the gradient length scales of mean density and temperature profiles. Argon plasma has been produced using a hot tungsten cathode over a wide range of pressures 5 × 10 -5 -1 × 10 -3 mbar, achieving plasma densities ranging from 10 9 to 10 11 cm -3 and the electron temperature in the range 1-8 eV. The radial profiles of plasma parameters measured along the non-cusp region (in between two consecutive magnets) show a finite region with uniform and quiescent plasma, where the magnetic field is very low such that the ions are unmagnetized. Beyond that region, both plasma species are magnetized and the profiles show gradients both in temperature and density. The electrostatic fluctuation measured using a Langmuir probe radially along the non-cusp region shows less than 1% (δI isat /I isat < 1%). The plasma thus produced will be used to study new and hitherto unexplored physics parameter space relevant to both laboratory multi-scale plasmas and astrophysical plasmas.

Use of Tabulated Thermochemical Data for Pure Compounds

NASA Technical Reports Server (NTRS)

Jacobson, Nathan S.

1999-01-01

Thermodynamic data for inorganic compounds is found in a variety of tabulations and computer databases. An extensive listing of sources of inorganic thermodynamic data is provided. The three major tabulations are the JANAF tables. Thermodynamic Properties of Individual Substances, and the tabulation by Barin. The notation and choice of standard states is different in each of these tabulations, so combining data from the different tabulations is often a problem. By understanding the choice of standard states, it is possible to develop simple equations for conversion of the data from one form to another.

Digital recovery, modification, and analysis of Tetra Tech seismic horizon mapping, National Petroleum Reserve Alaska (NPRA), northern Alaska

USGS Publications Warehouse

Saltus, R.W.; Kulander, Christopher S.; Potter, Christopher J.

2002-01-01

We have digitized, modified, and analyzed seismic interpretation maps of 12 subsurface stratigraphic horizons spanning portions of the National Petroleum Reserve in Alaska (NPRA). These original maps were prepared by Tetra Tech, Inc., based on about 15,000 miles of seismic data collected from 1974 to 1981. We have also digitized interpreted faults and seismic velocities from Tetra Tech maps. The seismic surfaces were digitized as two-way travel time horizons and converted to depth using Tetra Tech seismic velocities. The depth surfaces were then modified by long-wavelength corrections based on recent USGS seismic re-interpretation along regional seismic lines. We have developed and executed an algorithm to identify and calculate statistics on the area, volume, height, and depth of closed structures based on these seismic horizons. These closure statistics are tabulated and have been used as input to oil and gas assessment calculations for the region. Directories accompanying this report contain basic digitized data, processed data, maps, tabulations of closure statistics, and software relating to this project.

Validation of a vector version of the 6S radiative transfer code for atmospheric correction of satellite data. Part I: Path radiance

NASA Astrophysics Data System (ADS)

Kotchenova, Svetlana Y.; Vermote, Eric F.; Matarrese, Raffaella; Klemm, Frank J., Jr.

2006-09-01

A vector version of the 6S (Second Simulation of a Satellite Signal in the Solar Spectrum) radiative transfer code (6SV1), which enables accounting for radiation polarization, has been developed and validated against a Monte Carlo code, Coulson's tabulated values, and MOBY (Marine Optical Buoy System) water-leaving reflectance measurements. The developed code was also tested against the scalar codes SHARM, DISORT, and MODTRAN to evaluate its performance in scalar mode and the influence of polarization. The obtained results have shown a good agreement of 0.7% in comparison with the Monte Carlo code, 0.2% for Coulson's tabulated values, and 0.001-0.002 for the 400-550 nm region for the MOBY reflectances. Ignoring the effects of polarization led to large errors in calculated top-of-atmosphere reflectances: more than 10% for a molecular atmosphere and up to 5% for an aerosol atmosphere. This new version of 6S is intended to replace the previous scalar version used for calculation of lookup tables in the MODIS (Moderate Resolution Imaging Spectroradiometer) atmospheric correction algorithm.

Validation of a vector version of the 6S radiative transfer code for atmospheric correction of satellite data. Part I: path radiance.

PubMed

Kotchenova, Svetlana Y; Vermote, Eric F; Matarrese, Raffaella; Klemm, Frank J

2006-09-10

A vector version of the 6S (Second Simulation of a Satellite Signal in the Solar Spectrum) radiative transfer code (6SV1), which enables accounting for radiation polarization, has been developed and validated against a Monte Carlo code, Coulson's tabulated values, and MOBY (Marine Optical Buoy System) water-leaving reflectance measurements. The developed code was also tested against the scalar codes SHARM, DISORT, and MODTRAN to evaluate its performance in scalar mode and the influence of polarization. The obtained results have shown a good agreement of 0.7% in comparison with the Monte Carlo code, 0.2% for Coulson's tabulated values, and 0.001-0.002 for the 400-550 nm region for the MOBY reflectances. Ignoring the effects of polarization led to large errors in calculated top-of-atmosphere reflectances: more than 10% for a molecular atmosphere and up to 5% for an aerosol atmosphere. This new version of 6S is intended to replace the previous scalar version used for calculation of lookup tables in the MODIS (Moderate Resolution Imaging Spectroradiometer) atmospheric correction algorithm.

Comparison of Quantum Dots-in-a-Double-Well and Quantum Dots-in-a-Well Focal Plane Arrays in the Long-Wave Infrared

DTIC Science & Technology

2011-07-01

taken with the same camera head, operating temperature, range of calibrated blackbody illuminations, and using the same long-wavelength IR ( LWIR ) f/2...measurements shown in this article and are tabulated for comparison purposes only. Images were taken with all four devices using an f/2 LWIR lens (8–12 μm...These were acquired after a nonuniformity correction. A custom image-scaling algorithm was used to avoid the standard nonuniformity corrected scaling

LUMIS: Land Use Management and Information Systems; coordinate oriented program documentation

NASA Technical Reports Server (NTRS)

1976-01-01

An integrated geographic information system to assist program managers and planning groups in metropolitan regions is presented. The series of computer software programs and procedures involved in data base construction uses the census DIME file and point-in-polygon architectures. The system is described in two parts: (1) instructions to operators with regard to digitizing and editing procedures, and (2) application of data base construction algorithms to achieve map registration, assure the topological integrity of polygon files, and tabulate land use acreages within administrative districts.

A Fresh Look at Internet Protocol Version 6 (IPv6) for Department of Defense (DoD) Networks

DTIC Science & Technology

2010-08-01

since system administration practices (such as the use of security appliances) depend heavily on tools for network management, diagnosis and protection...are mobile ad hoc networks (MANETs) and yet there is limited practical experience with MANETs and their performance. Further, the interaction between...Systems FCS Future Combat System IETF Internet Engineering Task Force ISAT Information Science and Technology BAST Board on Army Science and

Computational efficiency for the surface renewal method

NASA Astrophysics Data System (ADS)

Kelley, Jason; Higgins, Chad

2018-04-01

Measuring surface fluxes using the surface renewal (SR) method requires programmatic algorithms for tabulation, algebraic calculation, and data quality control. A number of different methods have been published describing automated calibration of SR parameters. Because the SR method utilizes high-frequency (10 Hz+) measurements, some steps in the flux calculation are computationally expensive, especially when automating SR to perform many iterations of these calculations. Several new algorithms were written that perform the required calculations more efficiently and rapidly, and that tested for sensitivity to length of flux averaging period, ability to measure over a large range of lag timescales, and overall computational efficiency. These algorithms utilize signal processing techniques and algebraic simplifications that demonstrate simple modifications that dramatically improve computational efficiency. The results here complement efforts by other authors to standardize a robust and accurate computational SR method. Increased speed of computation time grants flexibility to implementing the SR method, opening new avenues for SR to be used in research, for applied monitoring, and in novel field deployments.

48 CFR 908.7117 - Tabulating machine cards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Tabulating machine cards. 908.7117 Section 908.7117 Federal Acquisition Regulations System DEPARTMENT OF ENERGY COMPETITION... Tabulating machine cards. DOE offices shall acquire tabulating machine cards in accordance with FPMR 41 CFR...

48 CFR 908.7117 - Tabulating machine cards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Tabulating machine cards. 908.7117 Section 908.7117 Federal Acquisition Regulations System DEPARTMENT OF ENERGY COMPETITION... Tabulating machine cards. DOE offices shall acquire tabulating machine cards in accordance with FPMR 41 CFR...

Estimating soot emissions from an elevated flare

NASA Astrophysics Data System (ADS)

Almanza, Victor; Sosa, Gustavo

2009-11-01

Combustion aerosols are one of the major concerns in flaring operations, due to both health and environmental hazards. Preliminary results are presented for a 2D transient simulation of soot formation in a reacting jet with exit velocity of 130 m/s under a 5 m/s crossflow released from a 50 m high elevated flare and a 50 cm nozzle. Combustion dynamics was simulated with OpenFOAM. Gas-phase non-premixed combustion was modeled with the Chalmers PaSR approach and a κ-ɛ turbulence model. For soot formation, Moss model was used and the ISAT algorithm for solving the chemistry. Sulfur chemistry was considered to account for the sourness of the fuel. Gas composition is 10 % H2S and 90 % C2H4. A simplified Glassman reaction mechanism was used for this purpose. Results show that soot levels are sensitive to the sulfur present in the fuel, since it was observed a slight decrease in the soot volume fraction. NSC is the current oxidation model for soot formation. Predicted temperature is high (about 2390 K), perhaps due to soot-radiation interaction is not considered yet, but a radiation model implementation is on progress, as well as an oxidation mechanism that accounts for OH radical. Flame length is about 50 m.

Survey of United States Army Reserve (USAR) Troop Program Unit (TPU) soldiers 1989. Tabulation of Questionnaire Responses: Cross-Sectional Sample: Officers and Enlisted Personnel

DTIC Science & Technology

1989-09-30

26 QUESTIONNAIRE INSTRUMENT ri. -I., DATA TABULATION VOLUMES This material provides information for use by readers to interpret...The second longitudinal Tabulation Volume reports the 1988 questionnaire responses of the junior enlisted "stayers" who were used as the sample to...the specific crossing variables used for the cross-sectional and longitudinal Tabulation Volumes. Cross-Sectional Tabulation Volumes. Demographic

VizieR Online Data Catalog: Catalog of strong MgII absorbers (Lawther+, 2012)

NASA Astrophysics Data System (ADS)

Lawther, D.; Paarup, T.; Schmidt, M.; Vestergaard, M.; Hjorth, J.; Malesani, D.

2012-08-01

Here we present a catalog of strong (rest equivalent width Wr> intervening Mg II absorbers in the SDSS Data Release 7 quasar catalog (2010AJ....139.2360S, Cat. VII/260). The intervening absorbers were found by a semi-automatic algorithm written in IDL - for details of the algorithm see section 2 of our paper. A subset of the absorbers have been visually inspected - see the MAN_OK flag in the catalog. The number of sightlines searched, tabulated by absorber redshift, i.e. g(z), is available as an ASCII table (for S/N>8 and S/N>15). All analysis in our paper is based on the SNR>8 coverage, and considers only sight-lines towards non-BAL quasars. Any questions regarding the catalog should be sent to Daniel Lawther (unclellama(at)gmail.com). (3 data files).

Iodine Plasma (Electric Propulsion) Interaction with Spacecraft Materials

DTIC Science & Technology

2016-12-28

fairly resistant to the reactive iodine and iodine plasma . The tantalum heat shielding , though, does react with iodine. DISTRIBUTION A: Distribution...way coupling manner due to the disparate time scales between the electrons (10-10 s ) and plasma (10-3 s ).17,18 Exhaust particles were modeled in two... plasma iodine impacts/m2/ s . Figure 7: iSAT Plume Interaction4 The velocity of both the neutrals and ions impacting the surface will be relatively

Advanced Electronic Technology.

DTIC Science & Technology

1980-05-15

for simultaneous predeposition of the resistor dopant. More suitable doping levels may be achieved concurrent with the phosphorous collector sinker...I-WC5-4 504Q Wideband LiNbO 3 Elastic Con- R. A. Becker 1979 Ultrasonics Sypoiun volver with Parabolic Horns D. H. Hurlburt Proceedings (IEEE, New...of T. C. Harman 2nd BACG Mtg. on "The Hg1 _ x Cd x Te Crystal Growth & Character- isation of 1I-VI Compounds ," University of Lancaster, England, 14-16

Grand-canonical solution of semiflexible self-avoiding trails on the Bethe lattice.

PubMed

Dantas, W G; Oliveira, Tiago J; Stilck, Jürgen F; Prellberg, Thomas

2017-02-01

We consider a model of semiflexible interacting self-avoiding trails (sISATs) on a lattice, where the walks are constrained to visit each lattice edge at most once. Such models have been studied as an alternative to the self-attracting self-avoiding walks (SASAWs) to investigate the collapse transition of polymers, with the attractive interactions being on site as opposed to nearest-neighbor interactions in SASAWs. The grand-canonical version of the sISAT model is solved on a four-coordinated Bethe lattice, and four phases appear: non-polymerized (NP), regular polymerized (P), dense polymerized (DP), and anisotropic nematic (AN), the last one present in the phase diagram only for sufficiently stiff chains. The last two phases are dense, in the sense that all lattice sites are visited once in the AN phase and twice in the DP phase. In general, critical NP-P and DP-P transition surfaces meet with a NP-DP coexistence surface at a line of bicritical points. The region in which the AN phase is stable is limited by a discontinuous critical transition to the P phase, and we study this somewhat unusual transition in some detail. In the limit of rods, where the chains are totally rigid, the P phase is absent and the three coexistence lines (NP-AN, AN-DP, and NP-DP) meet at a triple point, which is the endpoint of the bicritical line.

Development of an instrument to measure internalized stigma in those with HIV/AIDS.

PubMed

Phillips, Kenneth D; Moneyham, Linda; Tavakoli, Abbas

2011-01-01

Stigma has grave consequences for persons living with HIV/AIDS. Stigma hampers prevention of HIV transmission to sexual partners and to unborn babies, diagnosis, and early treatment, and negatively affects mental and physical health, quality of life, and life satisfaction. Internalized stigma of HIV/AIDS may have even more severe consequences than perceived or enacted stigma. The purpose of this study was to develop an instrument to measure internalized stigma in those with HIV/AIDS. Data were drawn from the Rural Women's Health Project. Research assistants administered structured interviews at baseline, 3 months, and 6 months. Instruments used in these analyses included a demographic data form, the Centers for Epidemiological Studies Depression Scale (CES-D), the Perceived Stigma Scale (PSS), and the Internalized Stigma of AIDS Tool (ISAT). Exploratory factor analysis confirmed that the ten items of the ISAT measure a single factor that explains 88% of the variance in the construct. Internal consistency was demonstrated by a Cronbach's alpha of .91 (Time 1), .92 (Time 2), and .92 (Time 3). Convergent validity was supported with significant positive correlations with the CES-D (rho = 0.33, p < 0.0001) and the PSS (rho = 0.56, < 0.0001). The Internalized Stigma of AIDS Tool appears to be a reliable and valid instrument to measure internalization of the stigma of HIV/AIDS. It may be of value in research and clinical assessment.

41 CFR 101-26.509 - Tabulating machine cards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 41 Public Contracts and Property Management 2 2011-07-01 2007-07-01 true Tabulating machine cards... PROGRAM 26.5-GSA Procurement Programs § 101-26.509 Tabulating machine cards. Procurement by Federal agencies of tabulating machine cards shall be made in accordance with the provisions of this § 101-26.509...

Retention time alignment of LC/MS data by a divide-and-conquer algorithm.

PubMed

Zhang, Zhongqi

2012-04-01

Liquid chromatography-mass spectrometry (LC/MS) has become the method of choice for characterizing complex mixtures. These analyses often involve quantitative comparison of components in multiple samples. To achieve automated sample comparison, the components of interest must be detected and identified, and their retention times aligned and peak areas calculated. This article describes a simple pairwise iterative retention time alignment algorithm, based on the divide-and-conquer approach, for alignment of ion features detected in LC/MS experiments. In this iterative algorithm, ion features in the sample run are first aligned with features in the reference run by applying a single constant shift of retention time. The sample chromatogram is then divided into two shorter chromatograms, which are aligned to the reference chromatogram the same way. Each shorter chromatogram is further divided into even shorter chromatograms. This process continues until each chromatogram is sufficiently narrow so that ion features within it have a similar retention time shift. In six pairwise LC/MS alignment examples containing a total of 6507 confirmed true corresponding feature pairs with retention time shifts up to five peak widths, the algorithm successfully aligned these features with an error rate of 0.2%. The alignment algorithm is demonstrated to be fast, robust, fully automatic, and superior to other algorithms. After alignment and gap-filling of detected ion features, their abundances can be tabulated for direct comparison between samples.

15 CFR 101.1 - Report of tabulations of population to states and localities pursuant to 13 U.S.C. 141(c).

Code of Federal Regulations, 2014 CFR

2014-01-01

... 15 Commerce and Foreign Trade 1 2014-01-01 2014-01-01 false Report of tabulations of population to... DECENNIAL CENSUS POPULATION INFORMATION § 101.1 Report of tabulations of population to states and localities... the methodology to be used in calculating the tabulations of population reported to States and...

15 CFR 101.1 - Report of tabulations of population to states and localities pursuant to 13 U.S.C. 141(c).

Code of Federal Regulations, 2012 CFR

2012-01-01

... 15 Commerce and Foreign Trade 1 2012-01-01 2012-01-01 false Report of tabulations of population to... DECENNIAL CENSUS POPULATION INFORMATION § 101.1 Report of tabulations of population to states and localities... the methodology to be used in calculating the tabulations of population reported to States and...

15 CFR 101.1 - Report of tabulations of population to states and localities pursuant to 13 U.S.C. 141(c).

Code of Federal Regulations, 2013 CFR

2013-01-01

... 15 Commerce and Foreign Trade 1 2013-01-01 2013-01-01 false Report of tabulations of population to... DECENNIAL CENSUS POPULATION INFORMATION § 101.1 Report of tabulations of population to states and localities... the methodology to be used in calculating the tabulations of population reported to States and...

Visual Technology Research Simulator (VTRS) Human Performance Research: Phase III.

DTIC Science & Technology

1981-11-01

you will intercept the glideslope and a centered meatball at approximately 4500 feet from the ramp. When the meatball approaches centerball you are to...this system with two horizontal bars (to represent the datum bars) and a moving dot (referred to as the ball or the meatball ). The system is...At two balls low the meatball starts to flash. Plus or minus two balls is the maximum effective range of the system. The ball will be lost off the top

Naval War College Review. Volume 60, Number 3, Summer 2007

DTIC Science & Technology

2007-06-01

you a new idea, and in that context it is interesting to think for a moment about the name of this beautiful , small town on the Narragansett Bay. It is...at everyone’s fingertips • Exploding Internet with bloggers , hackers, and chat rooms • Cell-phone cameras and recorders, making everyone a “reporter...simply The Road, and it is notable in every sense, most particularly for the heartbreaking beauty of its poetic language and as well for the utterly

Integrated Optical Transmitter and Receiver

DTIC Science & Technology

1983-02-01

pulses appear. Only one propagating domain is present at any given time, and when one domain is extracted the next one forms at the cathode. The...formation of a propagating domain results in a reduction in current through T the device, while the current increases after a domain is extracted . As a...net * Vb2 i (3.15) where c is the dielectric constant of the material. The transconductance gm is given by g id _ 1 + + 1 2 gm 5= _ 7 isat[(Vgs Vbi)( v

Applied Sciences Department (R&D) Patents; a Compilation

DTIC Science & Technology

1978-12-28

References Cited the first ampoule so that the two ampoules can he bro- UNITED STATES PATENTS ken simultaneously, and, upon mixing of the chemilu...Che-V222/541 miluminescent material and the other ampoule con-.tains an activator material. The almpoules can be bro-(561 References Cited ken by...Eaminer.-Robe" F. Stshl Aimmweys- Edgar J. broere. Ii. H Loach . and Paul S. isat `PYROTECHNCIGNALING ID E 1cER IT4 COMtPiOm WA!Eft EACTII’tIGN11M 4

Using Abbreviated Injury Scale (AIS) codes to classify Computed Tomography (CT) features in the Marshall System.

PubMed

Lesko, Mehdi M; Woodford, Maralyn; White, Laura; O'Brien, Sarah J; Childs, Charmaine; Lecky, Fiona E

2010-08-06

The purpose of Abbreviated Injury Scale (AIS) is to code various types of Traumatic Brain Injuries (TBI) based on their anatomical location and severity. The Marshall CT Classification is used to identify those subgroups of brain injured patients at higher risk of deterioration or mortality. The purpose of this study is to determine whether and how AIS coding can be translated to the Marshall Classification Initially, a Marshall Class was allocated to each AIS code through cross-tabulation. This was agreed upon through several discussion meetings with experts from both fields (clinicians and AIS coders). Furthermore, in order to make this translation possible, some necessary assumptions with regards to coding and classification of mass lesions and brain swelling were essential which were all approved and made explicit. The proposed method involves two stages: firstly to determine all possible Marshall Classes which a given patient can attract based on allocated AIS codes; via cross-tabulation and secondly to assign one Marshall Class to each patient through an algorithm. This method can be easily programmed in computer softwares and it would enable future important TBI research programs using trauma registry data.

Using Abbreviated Injury Scale (AIS) codes to classify Computed Tomography (CT) features in the Marshall System

PubMed Central

2010-01-01

Background The purpose of Abbreviated Injury Scale (AIS) is to code various types of Traumatic Brain Injuries (TBI) based on their anatomical location and severity. The Marshall CT Classification is used to identify those subgroups of brain injured patients at higher risk of deterioration or mortality. The purpose of this study is to determine whether and how AIS coding can be translated to the Marshall Classification Methods Initially, a Marshall Class was allocated to each AIS code through cross-tabulation. This was agreed upon through several discussion meetings with experts from both fields (clinicians and AIS coders). Furthermore, in order to make this translation possible, some necessary assumptions with regards to coding and classification of mass lesions and brain swelling were essential which were all approved and made explicit. Results The proposed method involves two stages: firstly to determine all possible Marshall Classes which a given patient can attract based on allocated AIS codes; via cross-tabulation and secondly to assign one Marshall Class to each patient through an algorithm. Conclusion This method can be easily programmed in computer softwares and it would enable future important TBI research programs using trauma registry data. PMID:20691038

Costs of Multidisciplinary Parenteral Nutrition Care Provided at a Distance via Mobile Tablets

PubMed Central

Kim, Heejung; Spaulding, Ryan; Werkowitch, Marilyn; Yadrich, Donna; Piamjariyakul, Ubolrat; Gilroy, Richard; Smith, Carol E.

2014-01-01

Background Determining the costs of healthcare delivery is a key step for providing efficient nutrition-based care. This analysis tabulates the costs of delivering home parenteral nutrition (HPN) interventions and clinical assessments through encrypted mobile technologies to increase patients’ access to healthcare providers, reduce their travel expenses, and allow early detection of infection and other complications. Methods A traditional cost-accounting method was used to tabulate all expenses related to mobile distance HPN clinic appointments, including (1) personnel time of multidisciplinary healthcare professionals, (2) supply of HPN intervention materials, and (3) equipment, connection, and delivery expenses. Results A total of 20 mobile distance clinic appointments were conducted for an average of 56 minutes each with 45 patients who required HPN infusion care. The initial setup costs included mobile tablet devices, 4G data plans, and personnel's time as well as intervention materials. The initial costs were on average $916.64 per patient, while the follow-up clinic appointments required $361.63 a month, with these costs continuing to decline as the equipment was used by multiple patients more frequently over time. Patients reported high levels of satisfaction with cost savings in travel expenses and rated the quality of care comparable to traditional in-person examinations. Conclusion This study provides important aspects of the initial cost tabulation for visual assessment for HPN appointments. These findings will be used to generate a decision algorithm for scheduling mobile distance clinic appointments intermittent with in-person visits to determine how to lower costs of nutrition assessments. To maximize the cost benefits, clinical trials must continue to collect clinical outcomes. PMID:25245253

Poster - 08: Preliminary Investigation into Collapsed-Cone based Dose Calculations for COMS Eye Plaques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morrison, Hali; Menon, Geetha; Sloboda, Ron

Purpose: To investigate the accuracy of model-based dose calculations using a collapsed-cone algorithm for COMS eye plaques loaded with I-125 seeds. Methods: The Nucletron SelectSeed 130.002 I-125 seed and the 12 mm COMS eye plaque were incorporated into a research version of the Oncentra® Brachy v4.5 treatment planning system which uses the Advanced Collapsed-cone Engine (ACE) algorithm. Comparisons of TG-43 and high-accuracy ACE doses were performed for a single seed in a 30×30×30 cm{sup 3} water box, as well as with one seed in the central slot of the 12 mm COMS eye plaque. The doses along the plaque centralmore » axis (CAX) were used to calculate the carrier correction factor, T(r), and were compared to tabulated and MCNP6 simulated doses for both the SelectSeed and IsoAid IAI-125A seeds. Results: The ACE calculated dose for the single seed in water was on average within 0.62 ± 2.2% of the TG-43 dose, with the largest differences occurring near the end-welds. The ratio of ACE to TG-43 calculated doses along the CAX (T(r)) of the 12 mm COMS plaque for the SelectSeed was on average within 3.0% of previously tabulated data, and within 2.9% of the MCNP6 simulated values. The IsoAid and SelectSeed T(r) values agreed within 0.3%. Conclusions: Initial comparisons show good agreement between ACE and MC doses for a single seed in a 12 mm COMS eye plaque; more complicated scenarios are being investigated to determine the accuracy of this calculation method.« less

Pacific Northwest residential energy survey. Volume 3. Question-by-question results

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1980-07-01

Tabulations are presented of responses to approximately 105 questions. Results are tabulated by 9 geographic regions: the four states of Idaho, Montana, Oregon, and Washington; four climate zones in the region; and a weighted Pacific Northwest total. A description of the tabulated data is given in the Introduction. Tabulated data deal with questions on dwelling characteristics; heating and air-conditioning systems; water heating; appliances; demographic and swelling characteristics; and insulation.

Thermal Analysis of Iodine Satellite (iSAT) from Preliminary Design Review (PDR) to Critical Design Review (CDR)

NASA Technical Reports Server (NTRS)

Mauro, Stephanie

2016-01-01

The Iodine Satellite (iSAT) is a 12U cubesat with a primary mission to demonstrate the iodine fueled Hall Effect Thruster (HET) propulsion system. The spacecraft (SC) will operate throughout a one year mission in an effort to mature the propulsion system for use in future applications. The benefit of the HET is that it uses a propellant, iodine, which is easy to store and provides a high thrust-to-mass ratio. This paper will describe the thermal analysis and design of the SC between Preliminary Design Review (PDR) and Critical Design Review (CDR). The design of the satellite has undergone many changes due to a variety of challenges, both before PDR and during the time period discussed in this paper. Thermal challenges associated with the system include a high power density, small amounts of available radiative surface area, localized temperature requirements of the propulsion components, and unknown orbital parameters. The thermal control system is implemented to maintain component temperatures within their respective operational limits throughout the mission, while also maintaining propulsion components at the high temperatures needed to allow gaseous iodine propellant to flow. The design includes heaters, insulation, radiators, coatings, and thermal straps. Currently, the maximum temperatures for several components are near to their maximum operation limit, and the battery is close to its minimum operation limit. Mitigation strategies and planned work to solve these challenges will be discussed.

Spatial inventory integrating raster databases and point sample data. [Geographic Information System for timber inventory

NASA Technical Reports Server (NTRS)

Strahler, A. H.; Woodcock, C. E.; Logan, T. L.

1983-01-01

A timber inventory of the Eldorado National Forest, located in east-central California, provides an example of the use of a Geographic Information System (GIS) to stratify large areas of land for sampling and the collection of statistical data. The raster-based GIS format of the VICAR/IBIS software system allows simple and rapid tabulation of areas, and facilitates the selection of random locations for ground sampling. Algorithms that simplify the complex spatial pattern of raster-based information, and convert raster format data to strings of coordinate vectors, provide a link to conventional vector-based geographic information systems.

Optimization of view weighting in tilted-plane-based reconstruction algorithms to minimize helical artifacts in multi-slice helical CT

NASA Astrophysics Data System (ADS)

Tang, Xiangyang

2003-05-01

In multi-slice helical CT, the single-tilted-plane-based reconstruction algorithm has been proposed to combat helical and cone beam artifacts by tilting a reconstruction plane to fit a helical source trajectory optimally. Furthermore, to improve the noise characteristics or dose efficiency of the single-tilted-plane-based reconstruction algorithm, the multi-tilted-plane-based reconstruction algorithm has been proposed, in which the reconstruction plane deviates from the pose globally optimized due to an extra rotation along the 3rd axis. As a result, the capability of suppressing helical and cone beam artifacts in the multi-tilted-plane-based reconstruction algorithm is compromised. An optomized tilted-plane-based reconstruction algorithm is proposed in this paper, in which a matched view weighting strategy is proposed to optimize the capability of suppressing helical and cone beam artifacts and noise characteristics. A helical body phantom is employed to quantitatively evaluate the imaging performance of the matched view weighting approach by tabulating artifact index and noise characteristics, showing that the matched view weighting improves both the helical artifact suppression and noise characteristics or dose efficiency significantly in comparison to the case in which non-matched view weighting is applied. Finally, it is believed that the matched view weighting approach is of practical importance in the development of multi-slive helical CT, because it maintains the computational structure of fan beam filtered backprojection and demands no extra computational services.

Survey of United States Army Reserve (USAR) Troop Program Unit (TPU) soldiers 1989. Tabulation of Questionnaire Responses: Cross-Sectional Sample: Junior Enlisted (E1-E4)

DTIC Science & Technology

1989-09-30

information for use by readers to interpret the tabulation volumes accompanying the final project report: 1989 Survey of U.S. Army Reserve (USAR) Troop...34stayers" who were used as the sample to generate the first longitudinal Tabulation Volume. Comparing questionnaire response frequencies between the...as described below). Detailed below are the specific crossing variables used for the cross-sectional and longitudinal Tabulation Volumes. Cross

Using standard clinical assessments for home care to identify vulnerable populations before, during, and after disasters.

PubMed

van Solm, Alexandra I T; Hirdes, John P; Eckel, Leslie A; Heckman, George A; Bigelow, Philip L

Several studies have shown the increased vulnerability of and disproportionate mortality rate among frail community-dwelling older adults as a result of emergencies and disasters. This article will discuss the applicability of the Vulnerable Persons at Risk (VPR) and VPR Plus decision support algorithms designed based on the Resident Assessment Instrument-Home Care (RAI-HC) to identify the most vulnerable community-dwelling (older) adults. A sample was taken from the Ontario RAI-HC database by selecting unique home care clients with assessments closest to December 31, 2014 (N = 275,797). Statistical methods used include cross tabulation, bivariate logistic regression as well as Kaplan-Meier survival plotting and Cox proportional hazards ratios calculations. The VPR and VPR Plus algorithms, were highly predictive of mortality, long-term care admission and hospitalization in ordinary circumstances. This provides a good indication of the strength of the algorithms in identifying vulnerable persons at times of emergencies. Access to real-time person-level information of persons with functional care needs is a vital enabler for emergency responders in prioritizing and allocating resources during a disaster, and has great utility for emergency planning and recovery efforts. The development of valid and reliable algorithms supports the rapid identification and response to vulnerable community-dwelling persons for all phases of emergency management.

A Survey of Serious Aircraft Accidents Involving Fatigue Fracture. Volume 2. Rotary-Wing Aircraft (Etude sur des Accidents Importants d’Avions du aux Effets des Fractures de Fatigue. Volume 2. Effets sur des Helicopteres).

DTIC Science & Technology

1983-04-01

Convention on International Civil Aviation, Second Edition , March 1966. 5. WORLD AIRLINE ACCIDENT SUMMARY. Civil Aviation Authority, (Great Britain...people who either provided information, or who suggested other sources of information for the current edition of this survey. E.M.R. Alexander Civil...Waverley, New Zealand. F-28C Tail rotor drive shaft. Fatigue strength reduc- ed by softened condition & surface decarbur- isation. AISA 4130 steel. Ref: NZ

Porting of an FPGA Based High Data Rate DVB-S2 Modulator

DTIC Science & Technology

2011-06-13

broadcast satellite market. The physical layer is detailed in the ETSI EN 302 307 V 1.1.2 (2006-06) standard. The waveform has seen broad adoption and...independent u IRRC Atar fi I I ii I .• DDS l; OAC Interface ~ (opCIontJ) " " 7 a RRC Filler V; ~ implementation, and one from Xilinx, which is...at 37- 38 is shown in Fignre 6. Additionally, the HDR DVB-S2 waveform running on the BDR-I was tested for interoperability at the physical layer

41 CFR 101-26.509-1 - Requisitioning tabulating machine cards available from Federal Supply Schedule contracts.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 41 Public Contracts and Property Management 2 2011-07-01 2007-07-01 true Requisitioning tabulating... Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT... electrical and mechanical contact tabulating machines, including aperture cards and copy cards. Federal...

41 CFR 101-26.509-1 - Requisitioning tabulating machine cards available from Federal Supply Schedule contracts.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Requisitioning tabulating... Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT... electrical and mechanical contact tabulating machines, including aperture cards and copy cards. Federal...

Use of Management Pathways or Algorithms in Children With Chronic Cough: Systematic Reviews.

PubMed

Chang, Anne B; Oppenheimer, John J; Weinberger, Miles; Weir, Kelly; Rubin, Bruce K; Irwin, Richard S

2016-01-01

Use of appropriate cough pathways or algorithms may reduce the morbidity of chronic cough, lead to earlier diagnosis of chronic underlying illness, and reduce unnecessary costs and medications. We undertook three systematic reviews to examine three related key questions (KQ): In children aged ?14 years with chronic cough (> 4 weeks' duration), KQ1, do cough management protocols (or algorithms) improve clinical outcomes? KQ2, should the cough management or testing algorithm differ depending on the duration and/or severity? KQ3, should the cough management or testing algorithm differ depending on the associated characteristics of the cough and clinical history? We used the CHEST expert cough panel's protocol. Two authors screened searches and selected and extracted data. Only systematic reviews, randomized controlled trials (RCTs), and cohort studies published in English were included. Data were presented in Preferred Reporting Items for Systematic Reviews and Meta-analyses flowcharts and summary tabulated. Nine studies were included in KQ1 (RCT = 1; cohort studies = 7) and eight in KQ3 (RCT = 2; cohort = 6), but none in KQ2. There is high-quality evidence that in children aged ?14 years with chronic cough (> 4 weeks' duration), the use of cough management protocols (or algorithms) improves clinical outcomes and cough management or the testing algorithm should differ depending on the associated characteristics of the cough and clinical history. It remains uncertain whether the management or testing algorithm should depend on the duration or severity of chronic cough. Pending new data, chronic cough in children should be defined as > 4 weeks' duration and children should be systematically evaluated with treatment targeted to the underlying cause irrespective of the cough severity. Copyright © 2016 American College of Chest Physicians. All rights reserved.

23 CFR 635.113 - Bid opening and bid tabulations.

Code of Federal Regulations, 2013 CFR

2013-04-01

... permitted. (b) The STD shall prepare and forward tabulations of bids to the Division Administrator. These tabulations shall be certified by a responsible STD official and shall show: (1) Bid item details for at least... opened and reviewed in accordance with the terms of the solicitation. The STD must use its own procedures...

23 CFR 635.113 - Bid opening and bid tabulations.

Code of Federal Regulations, 2014 CFR

2014-04-01

... permitted. (b) The STD shall prepare and forward tabulations of bids to the Division Administrator. These tabulations shall be certified by a responsible STD official and shall show: (1) Bid item details for at least... opened and reviewed in accordance with the terms of the solicitation. The STD must use its own procedures...

23 CFR 635.113 - Bid opening and bid tabulations.

Code of Federal Regulations, 2012 CFR

2012-04-01

... permitted. (b) The STD shall prepare and forward tabulations of bids to the Division Administrator. These tabulations shall be certified by a responsible STD official and shall show: (1) Bid item details for at least... opened and reviewed in accordance with the terms of the solicitation. The STD must use its own procedures...

23 CFR 635.113 - Bid opening and bid tabulations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... permitted. (b) The STD shall prepare and forward tabulations of bids to the Division Administrator. These tabulations shall be certified by a responsible STD official and shall show: (1) Bid item details for at least... opened and reviewed in accordance with the terms of the solicitation. The STD must use its own procedures...

Tabulations of ambient ozone data obtained by GASP (Global Air Sampling Program) airliners, March 1975 to July 1979

NASA Technical Reports Server (NTRS)

Jasperson, W. H.; Holdeman, J. D.

1984-01-01

Tabulations are given of GASP ambient ozone mean, standard deviation, median, 84th percentile, and 98th percentile values, by month, flight level, and geographical region. These data are tabulated to conform to the temporal and spatial resolution required by FAA Advisory Circular 120-38 (monthly by 2000 ft in altitude by 5 deg in latitude) for climatological data used to show compliance with cabin ozone regulations. In addition seasonal x 10 deg latitude tabulations are included which are directly comparable to and supersede the interim GASP ambient ozone tabulations given in appendix B of FAA-EE-80-43 (NASA TM-81528). Selected probability variations are highlighted to illustrate the spatial and temporal variability of ambient ozone and to compare results from the coarse and fine grid analyses.

Experimental validation of beam quality correction factors for proton beams

NASA Astrophysics Data System (ADS)

Gomà, Carles; Hofstetter-Boillat, Bénédicte; Safai, Sairos; Vörös, Sándor

2015-04-01

This paper presents a method to experimentally validate the beam quality correction factors (kQ) tabulated in IAEA TRS-398 for proton beams and to determine the kQ of non-tabulated ionization chambers (based on the already tabulated values). The method is based exclusively on ionometry and it consists in comparing the reading of two ionization chambers under the same reference conditions in a proton beam quality Q and a reference beam quality 60Co. This allows one to experimentally determine the ratio between the kQ of the two ionization chambers. In this work, 7 different ionization chamber models were irradiated under the IAEA TRS-398 reference conditions for 60Co beams and proton beams. For the latter, the reference conditions for both modulated beams (spread-out Bragg peak field) and monoenergetic beams (pseudo-monoenergetic field) were studied. For monoenergetic beams, it was found that the experimental kQ values obtained for plane-parallel chambers are consistent with the values tabulated in IAEA TRS-398; whereas the kQ values obtained for cylindrical chambers are not consistent—being higher than the tabulated values. These results support the suggestion (of previous publications) that the IAEA TRS-398 reference conditions for monoenergetic proton beams should be revised so that the effective point of measurement of cylindrical ionization chambers is taken into account when positioning the reference point of the chamber at the reference depth. For modulated proton beams, the tabulated kQ values of all the ionization chambers studied in this work were found to be consistent with each other—except for the IBA FC65-G, whose experimental kQ value was found to be 0.6% lower than the tabulated one. The kQ of the PTW Advanced Markus chamber, which is not tabulated in IAEA TRS-398, was found to be 0.997 ± 0.042 (k = 2), based on the tabulated value of the PTW Markus chamber.

Evaluation of different flamelet tabulation methods for laminar spray combustion

NASA Astrophysics Data System (ADS)

Luo, Yujuan; Wen, Xu; Wang, Haiou; Luo, Kun; Fan, Jianren

2018-05-01

In this work, three different flamelet tabulation methods for spray combustion are evaluated. Major differences among these methods lie in the treatment of the temperature boundary conditions of the flamelet equations. Particularly, in the first tabulation method ("M1"), both the fuel and oxidizer temperature boundary conditions are set to be fixed. In the second tabulation method ("M2"), the fuel temperature boundary condition is varied while the oxidizer temperature boundary condition is fixed. In the third tabulation method ("M3"), both the fuel and oxidizer temperature boundary conditions are varied and set to be equal. The focus of this work is to investigate whether the heat transfer between the droplet phase and gas phase can be represented by the studied tabulation methods through a priori analyses. To this end, spray flames stabilized in a three-dimensional counterflow are first simulated with detailed chemistry. Then, the trajectory variables are calculated from the detailed chemistry solutions. Finally, the tabulated thermo-chemical quantities are compared to the corresponding values from the detailed chemistry solutions. The comparisons show that the gas temperature cannot be predicted by "M1" with only a mixture fraction and reaction progress variable being the trajectory variables. The gas temperature can be correctly predicted by both "M2" and "M3," in which the total enthalpy is introduced as an additional manifold. In "M2," variations of the oxidizer temperature are considered with a temperature modification technique, which is not required in "M3." Interestingly, it is found that the mass fractions of the reactants and major products are not sensitive to the representation of the interphase heat transfer in the flamelet chemtables, and they can be correctly predicted by all tabulation methods. By contrast, the intermediate species CO and H2 in the premixed flame reaction zone are over-predicted by all tabulation methods.

Graph theory data for topological quantum chemistry.

PubMed

Vergniory, M G; Elcoro, L; Wang, Zhijun; Cano, Jennifer; Felser, C; Aroyo, M I; Bernevig, B Andrei; Bradlyn, Barry

2017-08-01

Topological phases of noninteracting particles are distinguished by the global properties of their band structure and eigenfunctions in momentum space. On the other hand, group theory as conventionally applied to solid-state physics focuses only on properties that are local (at high-symmetry points, lines, and planes) in the Brillouin zone. To bridge this gap, we have previously [Bradlyn et al., Nature (London) 547, 298 (2017)NATUAS0028-083610.1038/nature23268] mapped the problem of constructing global band structures out of local data to a graph construction problem. In this paper, we provide the explicit data and formulate the necessary algorithms to produce all topologically distinct graphs. Furthermore, we show how to apply these algorithms to certain "elementary" band structures highlighted in the aforementioned reference, and thus we identified and tabulated all orbital types and lattices that can give rise to topologically disconnected band structures. Finally, we show how to use the newly developed bandrep program on the Bilbao Crystallographic Server to access the results of our computation.

Influence of different dose calculation algorithms on the estimate of NTCP for lung complications.

PubMed

Hedin, Emma; Bäck, Anna

2013-09-06

Due to limitations and uncertainties in dose calculation algorithms, different algorithms can predict different dose distributions and dose-volume histograms for the same treatment. This can be a problem when estimating the normal tissue complication probability (NTCP) for patient-specific dose distributions. Published NTCP model parameters are often derived for a different dose calculation algorithm than the one used to calculate the actual dose distribution. The use of algorithm-specific NTCP model parameters can prevent errors caused by differences in dose calculation algorithms. The objective of this work was to determine how to change the NTCP model parameters for lung complications derived for a simple correction-based pencil beam dose calculation algorithm, in order to make them valid for three other common dose calculation algorithms. NTCP was calculated with the relative seriality (RS) and Lyman-Kutcher-Burman (LKB) models. The four dose calculation algorithms used were the pencil beam (PB) and collapsed cone (CC) algorithms employed by Oncentra, and the pencil beam convolution (PBC) and anisotropic analytical algorithm (AAA) employed by Eclipse. Original model parameters for lung complications were taken from four published studies on different grades of pneumonitis, and new algorithm-specific NTCP model parameters were determined. The difference between original and new model parameters was presented in relation to the reported model parameter uncertainties. Three different types of treatments were considered in the study: tangential and locoregional breast cancer treatment and lung cancer treatment. Changing the algorithm without the derivation of new model parameters caused changes in the NTCP value of up to 10 percentage points for the cases studied. Furthermore, the error introduced could be of the same magnitude as the confidence intervals of the calculated NTCP values. The new NTCP model parameters were tabulated as the algorithm was varied from PB to PBC, AAA, or CC. Moving from the PB to the PBC algorithm did not require new model parameters; however, moving from PB to AAA or CC did require a change in the NTCP model parameters, with CC requiring the largest change. It was shown that the new model parameters for a given algorithm are different for the different treatment types.

41 CFR 101-26.509-2 - Requisitioning tabulating machine cards not available from Federal Supply Schedule contracts.

Code of Federal Regulations, 2011 CFR

2011-07-01

... machine cards not available from Federal Supply Schedule contracts. 101-26.509-2 Section 101-26.509-2... Programs § 101-26.509-2 Requisitioning tabulating machine cards not available from Federal Supply Schedule contracts. (a) Requisitions for tabulating machine cards covered by Federal Supply Schedule contracts which...

The CMC/3DPNS computer program for prediction of three-dimension, subsonic, turbulent aerodynamic juncture region flow. Volume 2: Users' manual

NASA Technical Reports Server (NTRS)

Manhardt, P. D.

1982-01-01

The CMC fluid mechanics program system was developed to transmit the theoretical solution of finite element numerical solution methodology, applied to nonlinear field problems into a versatile computer code for comprehensive flow field analysis. Data procedures for the CMC 3 dimensional Parabolic Navier-Stokes (PNS) algorithm are presented. General data procedures a juncture corner flow standard test case data deck is described. A listing of the data deck and an explanation of grid generation methodology are presented. Tabulations of all commands and variables available to the user are described. These are in alphabetical order with cross reference numbers which refer to storage addresses.

Radiative transfer codes for atmospheric correction and aerosol retrieval: intercomparison study.

PubMed

Kotchenova, Svetlana Y; Vermote, Eric F; Levy, Robert; Lyapustin, Alexei

2008-05-01

Results are summarized for a scientific project devoted to the comparison of four atmospheric radiative transfer codes incorporated into different satellite data processing algorithms, namely, 6SV1.1 (second simulation of a satellite signal in the solar spectrum, vector, version 1.1), RT3 (radiative transfer), MODTRAN (moderate resolution atmospheric transmittance and radiance code), and SHARM (spherical harmonics). The performance of the codes is tested against well-known benchmarks, such as Coulson's tabulated values and a Monte Carlo code. The influence of revealed differences on aerosol optical thickness and surface reflectance retrieval is estimated theoretically by using a simple mathematical approach. All information about the project can be found at http://rtcodes.ltdri.org.

Radiative transfer codes for atmospheric correction and aerosol retrieval: intercomparison study

NASA Astrophysics Data System (ADS)

Kotchenova, Svetlana Y.; Vermote, Eric F.; Levy, Robert; Lyapustin, Alexei

2008-05-01

Results are summarized for a scientific project devoted to the comparison of four atmospheric radiative transfer codes incorporated into different satellite data processing algorithms, namely, 6SV1.1 (second simulation of a satellite signal in the solar spectrum, vector, version 1.1), RT3 (radiative transfer), MODTRAN (moderate resolution atmospheric transmittance and radiance code), and SHARM (spherical harmonics). The performance of the codes is tested against well-known benchmarks, such as Coulson's tabulated values and a Monte Carlo code. The influence of revealed differences on aerosol optical thickness and surface reflectance retrieval is estimated theoretically by using a simple mathematical approach. All information about the project can be found at http://rtcodes.ltdri.org.

System identification and model reduction using modulating function techniques

NASA Technical Reports Server (NTRS)

Shen, Yan

1993-01-01

Weighted least squares (WLS) and adaptive weighted least squares (AWLS) algorithms are initiated for continuous-time system identification using Fourier type modulating function techniques. Two stochastic signal models are examined using the mean square properties of the stochastic calculus: an equation error signal model with white noise residuals, and a more realistic white measurement noise signal model. The covariance matrices in each model are shown to be banded and sparse, and a joint likelihood cost function is developed which links the real and imaginary parts of the modulated quantities. The superior performance of above algorithms is demonstrated by comparing them with the LS/MFT and popular predicting error method (PEM) through 200 Monte Carlo simulations. A model reduction problem is formulated with the AWLS/MFT algorithm, and comparisons are made via six examples with a variety of model reduction techniques, including the well-known balanced realization method. Here the AWLS/MFT algorithm manifests higher accuracy in almost all cases, and exhibits its unique flexibility and versatility. Armed with this model reduction, the AWLS/MFT algorithm is extended into MIMO transfer function system identification problems. The impact due to the discrepancy in bandwidths and gains among subsystem is explored through five examples. Finally, as a comprehensive application, the stability derivatives of the longitudinal and lateral dynamics of an F-18 aircraft are identified using physical flight data provided by NASA. A pole-constrained SIMO and MIMO AWLS/MFT algorithm is devised and analyzed. Monte Carlo simulations illustrate its high-noise rejecting properties. Utilizing the flight data, comparisons among different MFT algorithms are tabulated and the AWLS is found to be strongly favored in almost all facets.

Risk of recurrent subarachnoid haemorrhage, death, or dependence and standardised mortality ratios after clipping or coiling of an intracranial aneurysm in the International Subarachnoid Aneurysm Trial (ISAT): long-term follow-up

PubMed Central

Molyneux, Andrew J; Kerr, Richard SC; Birks, Jacqueline; Ramzi, Najib; Yarnold, Julia; Sneade, Mary; Rischmiller, Joan

2009-01-01

Summary Background Our aim was to assess the long-term risks of death, disability, and rebleeding in patients randomly assigned to clipping or endovascular coiling after rupture of an intracranial aneurysm in the follow-up of the International Subarachnoid Aneurysm Trial (ISAT). Methods 2143 patients with ruptured intracranial aneurysms were enrolled between 1994 and 2002 at 43 neurosurgical centres and randomly assigned to clipping or coiling. Clinical outcomes at 1 year have been previously reported. All UK and some non-UK centres continued long-term follow-up of 2004 patients enrolled in the original cohort. Annual follow-up has been done for a minimum of 6 years and a maximum of 14 years (mean follow-up 9 years). All deaths and rebleeding events were recorded. Analysis of rebleeding was by allocation and by treatment received. ISAT is registered, number ISRCTN49866681. Findings 24 rebleeds had occurred more than 1 year after treatment. Of these, 13 were from the treated aneurysm (ten in the coiling group and three in the clipping group; log rank p=0·06 by intention-to-treat analysis). There were 8447 person-years of follow-up in the coiling group and 8177 person-years of follow-up in the clipping group. Four rebleeds occurred from a pre-existing aneurysm and six from new aneurysms. At 5 years, 11% (112 of 1046) of the patients in the endovascular group and 14% (144 of 1041) of the patients in the neurosurgical group had died (log-rank p=0·03). The risk of death at 5 years was significantly lower in the coiling group than in the clipping group (relative risk 0·77, 95% CI 0·61–0·98; p=0·03), but the proportion of survivors at 5 years who were independent did not differ between the two groups: endovascular 83% (626 of 755) and neurosurgical 82% (584 of 713). The standardised mortality rate, conditional on survival at 1 year, was increased for patients treated for ruptured aneurysms compared with the general population (1·57, 95% CI 1·32–1·82; p<0·0001). Interpretation There was an increased risk of recurrent bleeding from a coiled aneurysm compared with a clipped aneurysm, but the risks were small. The risk of death at 5 years was significantly lower in the coiled group than it was in the clipped group. The standardised mortality rate for patients treated for ruptured aneurysms was increased compared with the general population. Funding UK Medical Research Council. PMID:19329361

Survey of United States Army Reserve (USAR) Troop Program Unit (TPU) soldiers - 1989

DTIC Science & Technology

1989-09-30

TABULATION VOLUMES This material provides information for use by readers to interpret the tabulation volumes accompanying the final project report...questionnaire responses of the junior enlisted "stayers" who were used as the sample to generate the first longitudinal Tabulation Volume. Comparing...crossed by Iselected demographic variables (as described below). Detailed below are the specific crossing variables used for the cross-sectional and

Multivariable and Bayesian Network Analysis of Outcome Predictors in Acute Aneurysmal Subarachnoid Hemorrhage: Review of a Pure Surgical Series in the Post-International Subarachnoid Aneurysm Trial Era.

PubMed

Zador, Zsolt; Huang, Wendy; Sperrin, Matthew; Lawton, Michael T

2018-06-01

Following the International Subarachnoid Aneurysm Trial (ISAT), evolving treatment modalities for acute aneurysmal subarachnoid hemorrhage (aSAH) has changed the case mix of patients undergoing urgent surgical clipping. To update our knowledge on outcome predictors by analyzing admission parameters in a pure surgical series using variable importance ranking and machine learning. We reviewed a single surgeon's case series of 226 patients suffering from aSAH treated with urgent surgical clipping. Predictions were made using logistic regression models, and predictive performance was assessed using areas under the receiver operating curve (AUC). We established variable importance ranking using partial Nagelkerke R2 scores. Probabilistic associations between variables were depicted using Bayesian networks, a method of machine learning. Importance ranking showed that World Federation of Neurosurgical Societies (WFNS) grade and age were the most influential outcome prognosticators. Inclusion of only these 2 predictors was sufficient to maintain model performance compared to when all variables were considered (AUC = 0.8222, 95% confidence interval (CI): 0.7646-0.88 vs 0.8218, 95% CI: 0.7616-0.8821, respectively, DeLong's P = .992). Bayesian networks showed that age and WFNS grade were associated with several variables such as laboratory results and cardiorespiratory parameters. Our study is the first to report early outcomes and formal predictor importance ranking following aSAH in a post-ISAT surgical case series. Models showed good predictive power with fewer relevant predictors than in similar size series. Bayesian networks proved to be a powerful tool in visualizing the widespread association of the 2 key predictors with admission variables, explaining their importance and demonstrating the potential for hypothesis generation.

Monte Carlo simulations of time-of-flight PET with double-ended readout: calibration, coincidence resolving times and statistical lower bounds

PubMed Central

Derenzo, Stephen E

2017-01-01

This paper demonstrates through Monte Carlo simulations that a practical positron emission tomograph with (1) deep scintillators for efficient detection, (2) double-ended readout for depth-of-interaction information, (3) fixed-level analog triggering, and (4) accurate calibration and timing data corrections can achieve a coincidence resolving time (CRT) that is not far above the statistical lower bound. One Monte Carlo algorithm simulates a calibration procedure that uses data from a positron point source. Annihilation events with an interaction near the entrance surface of one scintillator are selected, and data from the two photodetectors on the other scintillator provide depth-dependent timing corrections. Another Monte Carlo algorithm simulates normal operation using these corrections and determines the CRT. A third Monte Carlo algorithm determines the CRT statistical lower bound by generating a series of random interaction depths, and for each interaction a set of random photoelectron times for each of the two photodetectors. The most likely interaction times are determined by shifting the depth-dependent probability density function to maximize the joint likelihood for all the photoelectron times in each set. Example calculations are tabulated for different numbers of photoelectrons and photodetector time jitters for three 3 × 3 × 30 mm3 scintillators: Lu2SiO5:Ce,Ca (LSO), LaBr3:Ce, and a hypothetical ultra-fast scintillator. To isolate the factors that depend on the scintillator length and the ability to estimate the DOI, CRT values are tabulated for perfect scintillator-photodetectors. For LSO with 4000 photoelectrons and single photoelectron time jitter of the photodetector J = 0.2 ns (FWHM), the CRT value using the statistically weighted average of corrected trigger times is 0.098 ns FWHM and the statistical lower bound is 0.091 ns FWHM. For LaBr3:Ce with 8000 photoelectrons and J = 0.2 ns FWHM, the CRT values are 0.070 and 0.063 ns FWHM, respectively. For the ultra-fast scintillator with 1 ns decay time, 4000 photoelectrons, and J = 0.2 ns FWHM, the CRT values are 0.021 and 0.017 ns FWHM, respectively. The examples also show that calibration and correction for depth-dependent variations in pulse height and in annihilation and optical photon transit times are necessary to achieve these CRT values. PMID:28327464

Monte Carlo simulations of time-of-flight PET with double-ended readout: calibration, coincidence resolving times and statistical lower bounds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Derenzo, Stephen E.

Here, this paper demonstrates through Monte Carlo simulations that a practical positron emission tomograph with (1) deep scintillators for efficient detection, (2) double-ended readout for depth-of-interaction information, (3) fixed-level analog triggering, and (4) accurate calibration and timing data corrections can achieve a coincidence resolving time (CRT) that is not far above the statistical lower bound. One Monte Carlo algorithm simulates a calibration procedure that uses data from a positron point source. Annihilation events with an interaction near the entrance surface of one scintillator are selected, and data from the two photodetectors on the other scintillator provide depth-dependent timing corrections. Anothermore » Monte Carlo algorithm simulates normal operation using these corrections and determines the CRT. A third Monte Carlo algorithm determines the CRT statistical lower bound by generating a series of random interaction depths, and for each interaction a set of random photoelectron times for each of the two photodetectors. The most likely interaction times are determined by shifting the depth-dependent probability density function to maximize the joint likelihood for all the photoelectron times in each set. Example calculations are tabulated for different numbers of photoelectrons and photodetector time jitters for three 3 × 3 × 30 mm 3 scintillators: Lu 2SiO 5 :Ce,Ca (LSO), LaBr 3:Ce, and a hypothetical ultra-fast scintillator. To isolate the factors that depend on the scintillator length and the ability to estimate the DOI, CRT values are tabulated for perfect scintillator-photodetectors. For LSO with 4000 photoelectrons and single photoelectron time jitter of the photodetector J = 0.2 ns (FWHM), the CRT value using the statistically weighted average of corrected trigger times is 0.098 ns FWHM and the statistical lower bound is 0.091 ns FWHM. For LaBr 3:Ce with 8000 photoelectrons and J = 0.2 ns FWHM, the CRT values are 0.070 and 0.063 ns FWHM, respectively. For the ultra-fast scintillator with 1 ns decay time, 4000 photoelectrons, and J = 0.2 ns FWHM, the CRT values are 0.021 and 0.017 ns FWHM, respectively. Lastly, the examples also show that calibration and correction for depth-dependent variations in pulse height and in annihilation and optical photon transit times are necessary to achieve these CRT values.« less

Monte Carlo simulations of time-of-flight PET with double-ended readout: calibration, coincidence resolving times and statistical lower bounds

DOE PAGES

Derenzo, Stephen E.

2017-04-11

Here, this paper demonstrates through Monte Carlo simulations that a practical positron emission tomograph with (1) deep scintillators for efficient detection, (2) double-ended readout for depth-of-interaction information, (3) fixed-level analog triggering, and (4) accurate calibration and timing data corrections can achieve a coincidence resolving time (CRT) that is not far above the statistical lower bound. One Monte Carlo algorithm simulates a calibration procedure that uses data from a positron point source. Annihilation events with an interaction near the entrance surface of one scintillator are selected, and data from the two photodetectors on the other scintillator provide depth-dependent timing corrections. Anothermore » Monte Carlo algorithm simulates normal operation using these corrections and determines the CRT. A third Monte Carlo algorithm determines the CRT statistical lower bound by generating a series of random interaction depths, and for each interaction a set of random photoelectron times for each of the two photodetectors. The most likely interaction times are determined by shifting the depth-dependent probability density function to maximize the joint likelihood for all the photoelectron times in each set. Example calculations are tabulated for different numbers of photoelectrons and photodetector time jitters for three 3 × 3 × 30 mm 3 scintillators: Lu 2SiO 5 :Ce,Ca (LSO), LaBr 3:Ce, and a hypothetical ultra-fast scintillator. To isolate the factors that depend on the scintillator length and the ability to estimate the DOI, CRT values are tabulated for perfect scintillator-photodetectors. For LSO with 4000 photoelectrons and single photoelectron time jitter of the photodetector J = 0.2 ns (FWHM), the CRT value using the statistically weighted average of corrected trigger times is 0.098 ns FWHM and the statistical lower bound is 0.091 ns FWHM. For LaBr 3:Ce with 8000 photoelectrons and J = 0.2 ns FWHM, the CRT values are 0.070 and 0.063 ns FWHM, respectively. For the ultra-fast scintillator with 1 ns decay time, 4000 photoelectrons, and J = 0.2 ns FWHM, the CRT values are 0.021 and 0.017 ns FWHM, respectively. Lastly, the examples also show that calibration and correction for depth-dependent variations in pulse height and in annihilation and optical photon transit times are necessary to achieve these CRT values.« less

Automated optimization of water-water interaction parameters for a coarse-grained model.

PubMed

Fogarty, Joseph C; Chiu, See-Wing; Kirby, Peter; Jakobsson, Eric; Pandit, Sagar A

2014-02-13

We have developed an automated parameter optimization software framework (ParOpt) that implements the Nelder-Mead simplex algorithm and applied it to a coarse-grained polarizable water model. The model employs a tabulated, modified Morse potential with decoupled short- and long-range interactions incorporating four water molecules per interaction site. Polarizability is introduced by the addition of a harmonic angle term defined among three charged points within each bead. The target function for parameter optimization was based on the experimental density, surface tension, electric field permittivity, and diffusion coefficient. The model was validated by comparison of statistical quantities with experimental observation. We found very good performance of the optimization procedure and good agreement of the model with experiment.

Steady pressure measurements on an Aeroelastic Research Wing (ARW-2)

NASA Technical Reports Server (NTRS)

Sandford, Maynard C.; Seidel, David A.; Eckstrom, Clinton V.

1994-01-01

Transonic steady and unsteady pressure tests have been conducted in the Langley transonic dynamics tunnel on a large elastic wing known as the DAST ARW-2. The wing has a supercritical airfoil, an aspect ratio of 10.3, a leading-edge sweep back angle of 28.8 degrees, and two inboard and one outboard trailing-edge control surfaces. Only the outboard control surface was deflected to generate steady and unsteady flow over the wing during this study. Only the steady surface pressure, control-surface hinge moment, wing-tip deflection, and wing-root bending moment measurements are presented. The results from this elastic wing test are in tabulated form to assist in calibrating advanced computational fluid dynamics (CFD) algorithms.

A tabulation of pipe length to diameter ratios as a function of Mach number and pressure ratios for compressible flow

NASA Technical Reports Server (NTRS)

Dixon, G. V.; Barringer, S. R.; Gray, C. E.; Leatherman, A. D.

1975-01-01

Computer programs and resulting tabulations are presented of pipeline length-to-diameter ratios as a function of Mach number and pressure ratios for compressible flow. The tabulations are applicable to air, nitrogen, oxygen, and hydrogen for compressible isothermal flow with friction and compressible adiabatic flow with friction. Also included are equations for the determination of weight flow. The tabulations presented cover a wider range of Mach numbers for choked, adiabatic flow than available from commonly used engineering literature. Additional information presented, but which is not available from this literature, is unchoked, adiabatic flow over a wide range of Mach numbers, and choked and unchoked, isothermal flow for a wide range of Mach numbers.

Generating Correlated Gamma Sequences for Sea-Clutter Simulation

DTIC Science & Technology

2012-03-01

generation of correlated Gamma random fields via SIRP theory is examined in [Conte et al. 1991, Armstrong & Griffiths 1991]. In these papers , the Gamma...2 〉2 + |〈x[n]x∗[n+ k]〉|2 . (4) Because 〈 |x|2 〉2 = z̄2 and |〈x[n]x∗[n+ k]〉|2 ≥ 0, this results in 〈z[n]z[n+ k]〉 ≥ z̄2 if the real- isation of z[n] is...linear map- ping. In a practical situation, a process with a given auto-covariance function would be specified. It is shown that by using an

The Effects of Tank Crew Turbulence on Tank Gunnery Performance

DTIC Science & Technology

1978-09-01

complete. Crewmen’s responses were converted to mouths for all itqms and tabulated for analysis. Because data was tabulated to two digits a maximum...two- digit data tabulation, mean and standard deviation statistics are somewhat conserva- tive for items 8, 9, and 10. There were 14-1S% of the TCs who...Benjamin Harrison. ATTN Libary I HQOA (DAMA-ARI I USAPACDC. Ft SBenjamuun Haritson, ATTN; ATCP-IHR I HOCIA OAPE HRE PO) IUSA Comrm- Elect Sch

Influence of different dose calculation algorithms on the estimate of NTCP for lung complications

PubMed Central

Bäck, Anna

2013-01-01

Due to limitations and uncertainties in dose calculation algorithms, different algorithms can predict different dose distributions and dose‐volume histograms for the same treatment. This can be a problem when estimating the normal tissue complication probability (NTCP) for patient‐specific dose distributions. Published NTCP model parameters are often derived for a different dose calculation algorithm than the one used to calculate the actual dose distribution. The use of algorithm‐specific NTCP model parameters can prevent errors caused by differences in dose calculation algorithms. The objective of this work was to determine how to change the NTCP model parameters for lung complications derived for a simple correction‐based pencil beam dose calculation algorithm, in order to make them valid for three other common dose calculation algorithms. NTCP was calculated with the relative seriality (RS) and Lyman‐Kutcher‐Burman (LKB) models. The four dose calculation algorithms used were the pencil beam (PB) and collapsed cone (CC) algorithms employed by Oncentra, and the pencil beam convolution (PBC) and anisotropic analytical algorithm (AAA) employed by Eclipse. Original model parameters for lung complications were taken from four published studies on different grades of pneumonitis, and new algorithm‐specific NTCP model parameters were determined. The difference between original and new model parameters was presented in relation to the reported model parameter uncertainties. Three different types of treatments were considered in the study: tangential and locoregional breast cancer treatment and lung cancer treatment. Changing the algorithm without the derivation of new model parameters caused changes in the NTCP value of up to 10 percentage points for the cases studied. Furthermore, the error introduced could be of the same magnitude as the confidence intervals of the calculated NTCP values. The new NTCP model parameters were tabulated as the algorithm was varied from PB to PBC, AAA, or CC. Moving from the PB to the PBC algorithm did not require new model parameters; however, moving from PB to AAA or CC did require a change in the NTCP model parameters, with CC requiring the largest change. It was shown that the new model parameters for a given algorithm are different for the different treatment types. PACS numbers: 87.53.‐j, 87.53.Kn, 87.55.‐x, 87.55.dh, 87.55.kd PMID:24036865

Making GRADE accessible: a proposal for graphic display of evidence quality assessments.

PubMed

Khan, Khalid S; Borowiack, Ewa; Roos, Carolien; Kowalska, Monika; Zapalska, Anna; Mol, Ben W; Mignini, Luciano; Meads, Catherine; Walczak, Jacek

2011-06-01

When generating guidelines, quality of evidence is frequently reported in tabulated form capturing several domains, for example, study design, risk of bias and heterogeneity. Increasingly, this is done using the Grading of Recommendations Assessment, Development and Evaluation approach. As assimilating large amount of tabulated data across several comparisons and outcomes spread over many pages (sometimes hundreds) is not easy, there is a need to present evidence summaries in a more effective way. A graphic display plotting the several domains used in evidence grading on equiangular spokes starting from the same point, the data length of each spoke proportional to the magnitude of the quality, succinctly captures tabulated information. These plots allow easy identification of deficiencies, outliers and similarities in evidence quality for individual and multiple comparisons and outcomes, paving the way for their routine use alongside tabulated information.

A marketing approach to carpool demand analysis. Technical memorandum II. Survey tabulations and evaluation. Conservation paper. [Commuter survey in 3 major urban areas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1976-07-01

The memorandum contains many detailed tabulations, cross tabulations, and major conclusions for policy assessment resulting from a survey taken in connection with a research effort examining the role of individuals attitudes and perceptions in deciding whether or not to carpool. The research was based upon a survey of commuters in 3 major urban areas and has resulted in a sizeable new data base on respondents' socio-economic and worktrip characteristics, travel perceptions, and travel preferences.

Survey of United States Army Reserve (USAR) Troop Program Unit (TPU) soldiers 1989. Tabulation of Questionnaire Responses: Longitudinal Sample: Junior Enlisted Stayers from 1988 to 1989. 1989 Questionnaire Responses

DTIC Science & Technology

1989-09-30

AD-A237 531 1989 SURVEY OF UNITED STATES ARMY RESERVE (USAR) TROOP PROGRAM UNIT (TPU) SOLDIERS Tabulation of Questionnaire Responses: Longitudinal...Program Unit (TPU) Soldiers . The Tabulation Volumes list questionnaire items and the percent of respondents (weighted to population estimates) who have...Reserve population eligible for selection was defined by the number of personnel rec,,rds on a Dpeber 1988 SIDPERS data base; this totalled 280,265

Three-dimensional representations of salt-dome margins at four active strategic petroleum reserve sites.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rautman, Christopher Arthur; Stein, Joshua S.

2003-01-01

Existing paper-based site characterization models of salt domes at the four active U.S. Strategic Petroleum Reserve sites have been converted to digital format and visualized using modern computer software. The four sites are the Bayou Choctaw dome in Iberville Parish, Louisiana; the Big Hill dome in Jefferson County, Texas; the Bryan Mound dome in Brazoria County, Texas; and the West Hackberry dome in Cameron Parish, Louisiana. A new modeling algorithm has been developed to overcome limitations of many standard geological modeling software packages in order to deal with structurally overhanging salt margins that are typical of many salt domes. Thismore » algorithm, and the implementing computer program, make use of the existing interpretive modeling conducted manually using professional geological judgement and presented in two dimensions in the original site characterization reports as structure contour maps on the top of salt. The algorithm makes use of concepts of finite-element meshes of general engineering usage. Although the specific implementation of the algorithm described in this report and the resulting output files are tailored to the modeling and visualization software used to construct the figures contained herein, the algorithm itself is generic and other implementations and output formats are possible. The graphical visualizations of the salt domes at the four Strategic Petroleum Reserve sites are believed to be major improvements over the previously available two-dimensional representations of the domes via conventional geologic drawings (cross sections and contour maps). Additionally, the numerical mesh files produced by this modeling activity are available for import into and display by other software routines. The mesh data are not explicitly tabulated in this report; however an electronic version in simple ASCII format is included on a PC-based compact disk.« less

23 CFR 635.113 - Bid opening and bid tabulations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CONSTRUCTION AND MAINTENANCE Contract Procedures § 635.113 Bid opening and bid tabulations. (a) All bids... contractors, during the period following the opening of bids and before the award of the contract shall not be...

Ab initio molecular simulations with numeric atom-centered orbitals

NASA Astrophysics Data System (ADS)

Blum, Volker; Gehrke, Ralf; Hanke, Felix; Havu, Paula; Havu, Ville; Ren, Xinguo; Reuter, Karsten; Scheffler, Matthias

2009-11-01

We describe a complete set of algorithms for ab initio molecular simulations based on numerically tabulated atom-centered orbitals (NAOs) to capture a wide range of molecular and materials properties from quantum-mechanical first principles. The full algorithmic framework described here is embodied in the Fritz Haber Institute "ab initio molecular simulations" (FHI-aims) computer program package. Its comprehensive description should be relevant to any other first-principles implementation based on NAOs. The focus here is on density-functional theory (DFT) in the local and semilocal (generalized gradient) approximations, but an extension to hybrid functionals, Hartree-Fock theory, and MP2/GW electron self-energies for total energies and excited states is possible within the same underlying algorithms. An all-electron/full-potential treatment that is both computationally efficient and accurate is achieved for periodic and cluster geometries on equal footing, including relaxation and ab initio molecular dynamics. We demonstrate the construction of transferable, hierarchical basis sets, allowing the calculation to range from qualitative tight-binding like accuracy to meV-level total energy convergence with the basis set. Since all basis functions are strictly localized, the otherwise computationally dominant grid-based operations scale as O(N) with system size N. Together with a scalar-relativistic treatment, the basis sets provide access to all elements from light to heavy. Both low-communication parallelization of all real-space grid based algorithms and a ScaLapack-based, customized handling of the linear algebra for all matrix operations are possible, guaranteeing efficient scaling (CPU time and memory) up to massively parallel computer systems with thousands of CPUs.

PRT Impact Study Pre-PRT Phase : Volume 3. Frequency Tabulations from Four Transportation-Related Surveys

DOT National Transportation Integrated Search

1976-03-01

The report gives tabulations of survey responses which were collected in Morgantown, West Virginia, as part of a study to assess the impact of the installation of the Personal Rapid Transit (PRT) System.

Hydrogen technology survey: Thermophysical properties

NASA Technical Reports Server (NTRS)

Mccarty, R. D.

1975-01-01

The thermodynamic functions, transport properties, and physical properties of both liquid and gaseous hydrogen are presented. The low temperature regime is emphasized. The tabulation of the properties of normal hydrogen in both Si and engineering units is given along with the tabulation of parahydrogen.

A method for calculation of free-space sound pressures near a propeller in flight including considerations of the chordwise blade loading

NASA Technical Reports Server (NTRS)

Watkins, Charles E; Durling, Barbara J

1956-01-01

This report presents tabulated values of certain definite integral that are involved in the calculation of near-field propeller noise when the chordwise forces are assumed to be either uniform or of a Dirac delta type. The tabulations are over a wide range of operating conditions and are useful for estimating propeller noise when either the concept of an effective radius or radial distributions of forces are considered. Use of the tabulations is illustrated by several examples of calculated results for some specific propellers.

Monte Carlo simulations of time-of-flight PET with double-ended readout: calibration, coincidence resolving times and statistical lower bounds

NASA Astrophysics Data System (ADS)

E Derenzo, Stephen

2017-05-01

This paper demonstrates through Monte Carlo simulations that a practical positron emission tomograph with (1) deep scintillators for efficient detection, (2) double-ended readout for depth-of-interaction information, (3) fixed-level analog triggering, and (4) accurate calibration and timing data corrections can achieve a coincidence resolving time (CRT) that is not far above the statistical lower bound. One Monte Carlo algorithm simulates a calibration procedure that uses data from a positron point source. Annihilation events with an interaction near the entrance surface of one scintillator are selected, and data from the two photodetectors on the other scintillator provide depth-dependent timing corrections. Another Monte Carlo algorithm simulates normal operation using these corrections and determines the CRT. A third Monte Carlo algorithm determines the CRT statistical lower bound by generating a series of random interaction depths, and for each interaction a set of random photoelectron times for each of the two photodetectors. The most likely interaction times are determined by shifting the depth-dependent probability density function to maximize the joint likelihood for all the photoelectron times in each set. Example calculations are tabulated for different numbers of photoelectrons and photodetector time jitters for three 3  ×  3  ×  30 mm3 scintillators: Lu2SiO5:Ce,Ca (LSO), LaBr3:Ce, and a hypothetical ultra-fast scintillator. To isolate the factors that depend on the scintillator length and the ability to estimate the DOI, CRT values are tabulated for perfect scintillator-photodetectors. For LSO with 4000 photoelectrons and single photoelectron time jitter of the photodetector J  =  0.2 ns (FWHM), the CRT value using the statistically weighted average of corrected trigger times is 0.098 ns FWHM and the statistical lower bound is 0.091 ns FWHM. For LaBr3:Ce with 8000 photoelectrons and J  =  0.2 ns FWHM, the CRT values are 0.070 and 0.063 ns FWHM, respectively. For the ultra-fast scintillator with 1 ns decay time, 4000 photoelectrons, and J  =  0.2 ns FWHM, the CRT values are 0.021 and 0.017 ns FWHM, respectively. The examples also show that calibration and correction for depth-dependent variations in pulse height and in annihilation and optical photon transit times are necessary to achieve these CRT values.

Integrated system for production of neutronics and photonics calculational constants. Neutron-induced interactions: bibliography of experimental data

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacGregor, M.H.; Cullen, D.E.; Howerton, R.J.

1976-07-04

The bibliographic citations in the Experimental Cross Section Information Library (ECSIL) as of July 4, 1976 are tabulated. The tabulation has three arrangements: alphabetically by author, alphabetically by publication, and numerically by reference number.

7 CFR 900.308 - Tabulation of ballots.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Conduct of Referenda To Determine Producer Approval of Milk Marketing Orders To Be Made Effective Pursuant to Agricultural Marketing Agreement Act of 1937, as Amended § 900.308 Tabulation of ballots. (a... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing...

The minimally invasive spinal deformity surgery algorithm: a reproducible rational framework for decision making in minimally invasive spinal deformity surgery.

PubMed

Mummaneni, Praveen V; Shaffrey, Christopher I; Lenke, Lawrence G; Park, Paul; Wang, Michael Y; La Marca, Frank; Smith, Justin S; Mundis, Gregory M; Okonkwo, David O; Moal, Bertrand; Fessler, Richard G; Anand, Neel; Uribe, Juan S; Kanter, Adam S; Akbarnia, Behrooz; Fu, Kai-Ming G

2014-05-01

Minimally invasive surgery (MIS) is an alternative to open deformity surgery for the treatment of patients with adult spinal deformity. However, at this time MIS techniques are not as versatile as open deformity techniques, and MIS techniques have been reported to result in suboptimal sagittal plane correction or pseudarthrosis when used for severe deformities. The minimally invasive spinal deformity surgery (MISDEF) algorithm was created to provide a framework for rational decision making for surgeons who are considering MIS versus open spine surgery. A team of experienced spinal deformity surgeons developed the MISDEF algorithm that incorporates a patient's preoperative radiographic parameters and leads to one of 3 general plans ranging from MIS direct or indirect decompression to open deformity surgery with osteotomies. The authors surveyed fellowship-trained spine surgeons experienced with spinal deformity surgery to validate the algorithm using a set of 20 cases to establish interobserver reliability. They then resurveyed the same surgeons 2 months later with the same cases presented in a different sequence to establish intraobserver reliability. Responses were collected and tabulated. Fleiss' analysis was performed using MATLAB software. Over a 3-month period, 11 surgeons completed the surveys. Responses for MISDEF algorithm case review demonstrated an interobserver kappa of 0.58 for the first round of surveys and an interobserver kappa of 0.69 for the second round of surveys, consistent with substantial agreement. In at least 10 cases there was perfect agreement between the reviewing surgeons. The mean intraobserver kappa for the 2 surveys was 0.86 ± 0.15 (± SD) and ranged from 0.62 to 1. The use of the MISDEF algorithm provides consistent and straightforward guidance for surgeons who are considering either an MIS or an open approach for the treatment of patients with adult spinal deformity. The MISDEF algorithm was found to have substantial inter- and intraobserver agreement. Although further studies are needed, the application of this algorithm could provide a platform for surgeons to achieve the desired goals of surgery.

Fully convolutional neural network for removing background in noisy images of uranium bearing particles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tarolli, Jay G.; Naes, Benjamin E.; Butler, Lamar

A fully convolutional neural network (FCN) was developed to supersede automatic or manual thresholding algorithms used for tabulating SIMS particle search data. The FCN was designed to perform a binary classification of pixels in each image belonging to a particle or not, thereby effectively removing background signal without manually or automatically determining an intensity threshold. Using 8,000 images from 28 different particle screening analyses, the FCN was trained to accurately predict pixels belonging to a particle with near 99% accuracy. Background eliminated images were then segmented using a watershed technique in order to determine isotopic ratios of particles. A comparisonmore » of the isotopic distributions of an independent data set segmented using the neural network, compared to a commercially available automated particle measurement (APM) program developed by CAMECA, highlighted the necessity for effective background removal to ensure that resulting particle identification is not only accurate, but preserves valuable signal that could be lost due to improper segmentation. The FCN approach improves the robustness of current state-of-the-art particle searching algorithms by reducing user input biases, resulting in an improved absolute signal per particle and decreased uncertainty of the determined isotope ratios.« less

From multidimensional neuropsychological outcomes to a cognitive complication rate: The International Subarachnoid Aneurysm Trial

PubMed Central

Scott, Richard B; Eccles, Fiona; Lloyd, Andrew; Carpenter, Katherine

2008-01-01

Background The neuropsychological arm of the International Subarachnoid Aneurysm Trial (N-ISAT) evaluated the cognitive outcome of 573 patients at 12 months following subarachnoid haemorrhage (SAH). The assessment included 29 psychometric measures, yielding a substantial and complex body of data. We have explored alternative and optimal methodologies for analysing and summarising these data to enable the estimation of a cognitive complication rate (CCR). Any differences in cognitive outcome between the two arms of the trial are not however reported here. Methods All individual test scores were transformed into z-scores and a 5th percentile cut-off for impairment was established. A principal components analysis (PCA) was applied to these data to mathematically transform correlated test scores into a smaller number of uncorrelated principal components, or cognitive 'domains'. These domains formed the basis for grouping and weighting individual patients' impaired scores on individual measures. In order to increase the sample size, a series of methods for handling missing data were applied. Results We estimated a 34.1% CCR in all those patients seen face-to-face, rising to 37.4% CCR with the inclusion of patients who were unable to attend assessment for reason related to the index SAH. This group demonstrated significantly more self and carer/relative rated disability on a Health Related Quality of Life questionnaire, than patients classified as having no functionally significant cognitive deficits. Conclusion Evaluating neuropsychological outcome in a large RCT involves unique methodological and organizational challenges. We have demonstrated how these problems may be addressed by re-classifying interval data from 29 measures into a dichotomous CCR. We have presented a 'sliding scale' of undifferentiated individual cognitive impairments, and then on the basis of PCA-derived cognitive 'domains', included consideration of the distribution of impairments in these terms. In order to maximize sample size we have suggested ways for patients who did not complete the entire protocol to be included in the overall CCR. ISAT trial registration ISRCTN49866681 PMID:18341689

Inflatable Space Structures Technology Development for Large Radar Antennas

NASA Technical Reports Server (NTRS)

Freeland, R. E.; Helms, Richard G.; Willis, Paul B.; Mikulas, M. M.; Stuckey, Wayne; Steckel, Gary; Watson, Judith

2004-01-01

There has been recent interest in inflatable space-structures technology for possible applications on U.S. Department of Defense (DOD) missions because of the technology's potential for high mechanical-packaging efficiency, variable stowed geometry, and deployment reliability. In recent years, the DOD sponsored Large Radar Antenna (LRA) Program applied this new technology to a baseline concept: a rigidizable/inflatable (RI) perimeter-truss structure supporting a mesh/net parabolic reflector antenna. The program addressed: (a) truss concept development, (b) regidizable materials concepts assessment, (c) mesh/net concept selection and integration, and (d) developed potential mechanical-system performance estimates. Critical and enabling technologies were validated, most notably the orbital radiation durable regidized materials and the high modulus, inflatable-deployable truss members. These results in conjunction with conclusions from previous mechanical-packaging studies by the U.S. Defense Advanced Research Projects Agency (DARPA) Special Program Office (SPO) were the impetus for the initiation of the DARPA/SPO Innovative Space-based Antenna Technology (ISAT) Program. The sponsor's baseline concept consisted of an inflatable-deployable truss structure for support of a large number of rigid, active radar panels. The program's goal was to determine the risk associated with the application of these new RI structures to the latest in radar technologies. The approach used to define the technology maturity level of critical structural elements was to: (a) develop truss concept baseline configurations (s), (b) assess specific inflatable-rigidizable materials technologies, and (c) estimate potential mechanical performance. The results of the structures portion of the program indicated there was high risk without the essential materials technology flight experiments, but only moderate risk if the appropriate on-orbit demonstrations were performed. This paper covers both programs (LRA and ISAT) in two sections, Parts 1 and 2 respectively. Please note that the terms strut, tube, and column are all used interchangeably and refer to the basic strut element of a truss. Also, the paper contains a mix of English and metric dimensional descriptions that reflect prevailing technical discipline conventions and common usage.

41 CFR 101-26.509 - Tabulating machine cards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Tabulating machine cards. 101-26.509 Section 101-26.509 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 26-PROCUREMENT SOURCES AND...

Diamagnetic Corrections and Pascal's Constants

ERIC Educational Resources Information Center

Bain, Gordon A.; Berry, John F.

2008-01-01

Measured magnetic susceptibilities of paramagnetic substances must typically be corrected for their underlying diamagnetism. This correction is often accomplished by using tabulated values for the diamagnetism of atoms, ions, or whole molecules. These tabulated values can be problematic since many sources contain incomplete and conflicting data.…

TABULATED EQUIVALENT SDR FLAMELET (TESF) MODEFL

DOE Office of Scientific and Technical Information (OSTI.GOV)

KUNDU, PRITHWISH; AMEEN, mUHSIN MOHAMMED; UNNIKRISHNAN, UMESH

The code consists of an implementation of a novel tabulated combustion model for non-premixed flames in CFD solvers. This novel technique/model is used to implement an unsteady flamelet tabulation without using progress variables for non-premixed flames. It also has the capability to include history effects which is unique within tabulated flamelet models. The flamelet table generation code can be run in parallel to generate tables with large chemistry mechanisms in relatively short wall clock times. The combustion model/code reads these tables. This framework can be coupled with any CFD solver with RANS as well as LES turbulence models. This frameworkmore » enables CFD solvers to run large chemistry mechanisms with large number of grids at relatively lower computational costs. Currently it has been coupled with the Converge CFD code and validated against available experimental data. This model can be used to simulate non-premixed combustion in a variety of applications like reciprocating engines, gas turbines and industrial burners operating over a wide range of fuels.« less

Evidence of photosymbiosis in Palaeozoic tabulate corals.

PubMed

Zapalski, Mikolaj K

2014-01-22

Coral reefs form the most diverse of all marine ecosystems on the Earth. Corals are among their main components and owe their bioconstructing abilities to a symbiosis with algae (Symbiodinium). The coral-algae symbiosis had been traced back to the Triassic (ca 240 Ma). Modern reef-building corals (Scleractinia) appeared after the Permian-Triassic crisis; in the Palaeozoic, some of the main reef constructors were extinct tabulate corals. The calcium carbonate secreted by extant photosymbiotic corals bears characteristic isotope (C and O) signatures. The analysis of tabulate corals belonging to four orders (Favositida, Heliolitida, Syringoporida and Auloporida) from Silurian to Permian strata of Europe and Africa shows these characteristic carbon and oxygen stable isotope signatures. The δ(18)O to δ(13)C ratios in recent photosymbiotic scleractinians are very similar to those of Palaeozoic tabulates, thus providing strong evidence of such symbioses as early as the Middle Silurian (ca 430 Ma). Corals in Palaeozoic reefs used the same cellular mechanisms for carbonate secretion as recent reefs, and thus contributed to reef formation.

Asynchronous machine rotor speed estimation using a tabulated numerical approach

NASA Astrophysics Data System (ADS)

Nguyen, Huu Phuc; De Miras, Jérôme; Charara, Ali; Eltabach, Mario; Bonnet, Stéphane

2017-12-01

This paper proposes a new method to estimate the rotor speed of the asynchronous machine by looking at the estimation problem as a nonlinear optimal control problem. The behavior of the nonlinear plant model is approximated off-line as a prediction map using a numerical one-step time discretization obtained from simulations. At each time-step, the speed of the induction machine is selected satisfying the dynamic fitting problem between the plant output and the predicted output, leading the system to adopt its dynamical behavior. Thanks to the limitation of the prediction horizon to a single time-step, the execution time of the algorithm can be completely bounded. It can thus easily be implemented and embedded into a real-time system to observe the speed of the real induction motor. Simulation results show the performance and robustness of the proposed estimator.

Standardization of Schwarz-Christoffel transformation for engineering design of semiconductor and hybrid integrated-circuit elements

NASA Astrophysics Data System (ADS)

Yashin, A. A.

1985-04-01

A semiconductor or hybrid structure into a calculable two-dimensional region mapped by the Schwarz-Christoffel transformation and a universal algorithm can be constructed on the basis of Maxwell's electro-magnetic-thermal similarity principle for engineering design of integrated-circuit elements. The design procedure involves conformal mapping of the original region into a polygon and then the latter into a rectangle with uniform field distribution, where conductances and capacitances are calculated, using tabulated standard mapping functions. Subsequent synthesis of a device requires inverse conformal mapping. Devices adaptable as integrated-circuit elements are high-resistance film resistors with periodic serration, distributed-resistance film attenuators with high transformation ratio, coplanar microstrip lines, bipolar transistors, directional couplers with distributed coupling to microstrip lines for microwave bulk devices, and quasirregular smooth matching transitions from asymmetric to coplanar microstrip lines.

Empirical analysis of knowledge bases to support structured output in the Arden syntax.

PubMed

Jenders, Robert A

2013-01-01

Structured output has been suggested for the Arden Syntax to facilitate interoperability. Tabulate the components of WRITE statements in a corpus of medical logic modules (MLMs)in order to validate requiring structured output. WRITE statements were tabulated in 258 MLMs from 2 organizations. In a total of 351 WRITE statements, email destinations (226) predominated, and 39 orders and 40 coded output elements also were tabulated. Free-text strings predominated as the message data. Arden WRITE statements contain considerable potentially structured data now included as free text. A future, normative structured WRITE statement must address a variety of data types and destinations.

Interaction geometry: an ecological perspective.

Treesearch

Rolfe A. Leary

1976-01-01

A new mathematical coordinate system results from a unique combination of two frameworks long used by ecologists: the phase plane and coaction cross-tabulation. The resulting construct combines the classifying power of the cross-tabulation and discriminating power of the phase plane. It may be used for analysis and synthesis.

Tabulated Neutron Emission Rates for Plutonium Oxide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shores, Erik Frederick

This work tabulates neutron emission rates for 80 plutonium oxide samples as reported in the literature. Plutonium-­238 and plutonium-­239 oxides are included and such emission rates are useful for scaling tallies from Monte Carlo simulations and estimating dose rates for health physics applications.

An a priori study of different tabulation methods for turbulent pulverised coal combustion

NASA Astrophysics Data System (ADS)

Luo, Yujuan; Wen, Xu; Wang, Haiou; Luo, Kun; Jin, Hanhui; Fan, Jianren

2018-05-01

In many practical pulverised coal combustion systems, different oxidiser streams exist, e.g. the primary- and secondary-air streams in the power plant boilers, which makes the modelling of these systems challenging. In this work, three tabulation methods for modelling pulverised coal combustion are evaluated through an a priori study. Pulverised coal flames stabilised in a three-dimensional turbulent counterflow, consisting of different oxidiser streams, are simulated with detailed chemistry first. Then, the thermo-chemical quantities calculated with different tabulation methods are compared to those from detailed chemistry solutions. The comparison shows that the conventional two-stream flamelet model with a fixed oxidiser temperature cannot predict the flame temperature correctly. The conventional two-stream flamelet model is then modified to set the oxidiser temperature equal to the fuel temperature, both of which are varied in the flamelets. By this means, the variations of oxidiser temperature can be considered. It is found that this modified tabulation method performs very well on prediction of the flame temperature. The third tabulation method is an extended three-stream flamelet model that was initially proposed for gaseous combustion. The results show that the reference gaseous temperature profile can be overall reproduced by the extended three-stream flamelet model. Interestingly, it is found that the predictions of major species mass fractions are not sensitive to the oxidiser temperature boundary conditions for the flamelet equations in the a priori analyses.

Study of short haul high-density V/STOL transportation systems. Volume 2: Appendices

NASA Technical Reports Server (NTRS)

Solomon, H. L.

1972-01-01

Essential supporting data to the short haul transportation study are presented. The specific appendices are arena characteristics, aerospace transportation analysis computer program, economics, model calibration, STOLport siting and services path selection, STOL schedule definition, tabulated California corridor results, and tabulated Midwest arena results.

Floods in the Wapsipinicon River Basin, Iowa

USGS Publications Warehouse

Schwob, Harlan H.

1971-01-01

Flood-profile sheets show profiles of actual flood occurrences and computed profiles of the 25- and 50-year floods at most locations. These sheets also contain tabulations of the flood discharges profiled. A low-water profile and tabulated discharge indicate the range in elevation and discharge along the streams.

Model aerodynamic test results for two variable cycle engine coannular exhaust systems at simulated takeoff and cruise conditions. Comprehensive data report. Volume 2: Tabulated aerodynamic data book 2

NASA Technical Reports Server (NTRS)

Nelson, D. P.

1981-01-01

Tabulated aerodynamic data from coannular nozzle performance tests are given for test runs 26 through 37. The data include nozzle thrust coefficient parameters, nozzle discharge coefficients, and static pressure tap measurements.

BLS Machine-Readable Data and Tabulating Routines.

ERIC Educational Resources Information Center

DiFillipo, Tony

This report describes the machine-readable data and tabulating routines that the Bureau of Labor Statistics (BLS) is prepared to distribute. An introduction discusses the LABSTAT (Labor Statistics) database and the BLS policy on release of unpublished data. Descriptions summarizing data stored in 25 files follow this format: overview, data…

Research Trends with Cross Tabulation Search Engine

ERIC Educational Resources Information Center

Yin, Chengjiu; Hirokawa, Sachio; Yau, Jane Yin-Kim; Hashimoto, Kiyota; Tabata, Yoshiyuki; Nakatoh, Tetsuya

2013-01-01

To help researchers in building a knowledge foundation of their research fields which could be a time-consuming process, the authors have developed a Cross Tabulation Search Engine (CTSE). Its purpose is to assist researchers in 1) conducting research surveys, 2) efficiently and effectively retrieving information (such as important researchers,…

Biodegradation of indole at high concentration by persolvent fermentation with Pseudomonas sp. ST-200.

PubMed

Doukyu, N; Aono, R

1997-05-01

Pseudomonas sp. strain ST-200 grew on indole as a sole carbon source. The minimal inhibitory concentration of indole was 0.3 mg/ml for ST-200. However, ST-200 grew in a persolvent fermentation system containing a large amount of indole (a medium containing 20% by vol. diphenylmethane and 4 mg/ml indole), because most of the indole was partitioned in the organic solvent layer. When the organism was grown in the medium containing indole at 1 mg/ml in the presence of diphenylmethane, more than 98% of the indole was consumed after 48h. Isatic acid (0.4 mg/ml) and isatin (0.03 mg/ml) were produced as the metabolites in the aqueous medium layer.

Implementation of Pilot Protection System for Large Scale Distribution System like The Future Renewable Electric Energy Distribution Management Project

NASA Astrophysics Data System (ADS)

Iigaya, Kiyohito

A robust, fast and accurate protection system based on pilot protection concept was developed previously and a few alterations in that algorithm were made to make it faster and more reliable and then was applied to smart distribution grids to verify the results for it. The new 10 sample window method was adapted into the pilot protection program and its performance for the test bed system operation was tabulated. Following that the system comparison between the hardware results for the same algorithm and the simulation results were compared. The development of the dual slope percentage differential method, its comparison with the 10 sample average window pilot protection system and the effects of CT saturation on the pilot protection system are also shown in this thesis. The implementation of the 10 sample average window pilot protection system is done to multiple distribution grids like Green Hub v4.3, IEEE 34, LSSS loop and modified LSSS loop. Case studies of these multi-terminal model are presented, and the results are also shown in this thesis. The result obtained shows that the new algorithm for the previously proposed protection system successfully identifies fault on the test bed and the results for both hardware and software simulations match and the response time is approximately less than quarter of a cycle which is fast as compared to the present commercial protection system and satisfies the FREEDM system requirement.

Effect of impurities and processing on silicon solar cells. Volume 1: Characterization methods for impurities in silicon and impurity effects data base

NASA Technical Reports Server (NTRS)

Hopkins, R. H.; Davis, J. R.; Rohatgi, A.; Campbell, R. B.; Blais, P. D.; Rai-Choudhury, P.; Stapleton, R. E.; Mollenkopf, H. C.; Mccormick, J. R.

1980-01-01

Two major topics are treated: methods to measure and evaluate impurity effects in silicon and comprehensive tabulations of data derived during the study. Discussions of deep level spectroscopy, detailed dark I-V measurements, recombination lifetime determination, scanned laser photo-response, conventional solar cell I-V techniques, and descriptions of silicon chemical analysis are presented and discussed. The tabulated data include lists of impurity segregation coefficients, ingot impurity analyses and estimated concentrations, typical deep level impurity spectra, photoconductive and open circuit decay lifetimes for individual metal-doped ingots, and a complete tabulation of the cell I-V characteristics of nearly 200 ingots.

40 CFR 146.34 - Information to be considered by the Director.

Code of Federal Regulations, 2010 CFR

2010-07-01

... injected; (ii) Average and maximum injection pressure; and (iii) Qualitative analysis and ranges in..., cross sections, tabulations of wells within the area of review, and other data may be included in the... this map. (3) A tabulation of data reasonably available from public records or otherwise known to the...

Tabulate Corals after the Frasnian/Famennian Crisis: A Unique Fauna from the Holy Cross Mountains, Poland

PubMed Central

Zapalski, Mikołaj K.; Berkowski, Błażej; Wrzołek, Tomasz

2016-01-01

Famennian tabulate corals were very rare worldwide, and their biodiversity was relatively low. Here we report a unique tabulate fauna from the mid- and late Famennian of the western part of the Holy Cross Mountains (Kowala and Ostrówka), Poland. We describe eight species (four of them new, namely ?Michelinia vinni sp. nov., Thamnoptychia mistiaeni sp. nov., Syringopora kowalensis sp. nov. and Syringopora hilarowiczi sp. nov.); the whole fauna consists of ten species (two others described in previous papers). These corals form two assemblages—the lower, mid-Famennian with Thamnoptychia and the upper, late Famennian with representatives of genera ?Michelinia, Favosites, Syringopora and ?Yavorskia. The Famennian tabulates from Kowala represent the richest Famennian assemblage appearing after the F/F crisis (these faunas appear some 10 Ma after the extinction event). Corals described here most probably inhabited deeper water settings, near the limit between euphotic and disphotic zones or slightly above. At generic level, these faunas show similarities to other Devonian and Carboniferous faunas, which might suggest their ancestry to at least several Carboniferous lineages. Tabulate faunas described here represent new recruits (the basin of the Holy Cross mountains was not a refuge during the F/F crisis) and have no direct evolutionary linkage to Frasnian faunas from Kowala. The colonization of the seafloor took place in two separate steps: first was monospecific assemblage of Thamnoptychia, and later came the diversified Favosites-Syringopora-Michelinia fauna. PMID:27007689

Large eddy simulation of turbulent premixed combustion using tabulated detailed chemistry and presumed probability density function

NASA Astrophysics Data System (ADS)

Zhang, Hongda; Han, Chao; Ye, Taohong; Ren, Zhuyin

2016-03-01

A method of chemistry tabulation combined with presumed probability density function (PDF) is applied to simulate piloted premixed jet burner flames with high Karlovitz number using large eddy simulation. Thermo-chemistry states are tabulated by the combination of auto-ignition and extended auto-ignition model. To evaluate the predictive capability of the proposed tabulation method to represent the thermo-chemistry states under the condition of different fresh gases temperature, a-priori study is conducted by performing idealised transient one-dimensional premixed flame simulations. Presumed PDF is used to involve the interaction of turbulence and flame with beta PDF to model the reaction progress variable distribution. Two presumed PDF models, Dirichlet distribution and independent beta distribution, respectively, are applied for representing the interaction between two mixture fractions that are associated with three inlet streams. Comparisons of statistical results show that two presumed PDF models for the two mixture fractions are both capable of predicting temperature and major species profiles, however, they are shown to have a significant effect on the predictions for intermediate species. An analysis of the thermo-chemical state-space representation of the sub-grid scale (SGS) combustion model is performed by comparing correlations between the carbon monoxide mass fraction and temperature. The SGS combustion model based on the proposed chemistry tabulation can reasonably capture the peak value and change trend of intermediate species. Aspects regarding model extensions to adequately predict the peak location of intermediate species are discussed.

Tabulate Corals after the Frasnian/Famennian Crisis: A Unique Fauna from the Holy Cross Mountains, Poland.

PubMed

Zapalski, Mikołaj K; Berkowski, Błażej; Wrzołek, Tomasz

2016-01-01

Famennian tabulate corals were very rare worldwide, and their biodiversity was relatively low. Here we report a unique tabulate fauna from the mid- and late Famennian of the western part of the Holy Cross Mountains (Kowala and Ostrówka), Poland. We describe eight species (four of them new, namely ?Michelinia vinni sp. nov., Thamnoptychia mistiaeni sp. nov., Syringopora kowalensis sp. nov. and Syringopora hilarowiczi sp. nov.); the whole fauna consists of ten species (two others described in previous papers). These corals form two assemblages-the lower, mid-Famennian with Thamnoptychia and the upper, late Famennian with representatives of genera ?Michelinia, Favosites, Syringopora and ?Yavorskia. The Famennian tabulates from Kowala represent the richest Famennian assemblage appearing after the F/F crisis (these faunas appear some 10 Ma after the extinction event). Corals described here most probably inhabited deeper water settings, near the limit between euphotic and disphotic zones or slightly above. At generic level, these faunas show similarities to other Devonian and Carboniferous faunas, which might suggest their ancestry to at least several Carboniferous lineages. Tabulate faunas described here represent new recruits (the basin of the Holy Cross mountains was not a refuge during the F/F crisis) and have no direct evolutionary linkage to Frasnian faunas from Kowala. The colonization of the seafloor took place in two separate steps: first was monospecific assemblage of Thamnoptychia, and later came the diversified Favosites-Syringopora-Michelinia fauna.

Development and Characterization of a Rate-Dependent Three-Dimensional Macroscopic Plasticity Model Suitable for Use in Composite Impact Problems

NASA Technical Reports Server (NTRS)

Goldberg, Robert K.; Carney, Kelly S.; DuBois, Paul; Hoffarth, Canio; Rajan, Subramaniam; Blankenhorn, Gunther

2015-01-01

Several key capabilities have been identified by the aerospace community as lacking in the material/models for composite materials currently available within commercial transient dynamic finite element codes such as LS-DYNA. Some of the specific desired features that have been identified include the incorporation of both plasticity and damage within the material model, the capability of using the material model to analyze the response of both three-dimensional solid elements and two dimensional shell elements, and the ability to simulate the response of composites composed with a variety of composite architectures, including laminates, weaves and braids. In addition, a need has been expressed to have a material model that utilizes tabulated experimentally based input to define the evolution of plasticity and damage as opposed to utilizing discrete input parameters (such as modulus and strength) and analytical functions based on curve fitting. To begin to address these needs, an orthotropic macroscopic plasticity based model suitable for implementation within LS-DYNA has been developed. Specifically, the Tsai-Wu composite failure model has been generalized and extended to a strain-hardening based orthotropic plasticity model with a non-associative flow rule. The coefficients in the yield function are determined based on tabulated stress-strain curves in the various normal and shear directions, along with selected off-axis curves. Incorporating rate dependence into the yield function is achieved by using a series of tabluated input curves, each at a different constant strain rate. The non-associative flow-rule is used to compute the evolution of the effective plastic strain. Systematic procedures have been developed to determine the values of the various coefficients in the yield function and the flow rule based on the tabulated input data. An algorithm based on the radial return method has been developed to facilitate the numerical implementation of the material model. The presented paper will present in detail the development of the orthotropic plasticity model and the procedures used to obtain the required material parameters. Methods in which a combination of actual testing and selective numerical testing can be combined to yield the appropriate input data for the model will be described. A specific laminated polymer matrix composite will be examined to demonstrate the application of the model.

A topological screening heuristic for low-energy, high-index surfaces

NASA Astrophysics Data System (ADS)

Sun, Wenhao; Ceder, Gerbrand

2018-03-01

Robust ab initio investigations of nanoparticle surface properties require a method to identify candidate low-energy surface facets a priori. By assuming that low-energy surfaces are planes with high atomic density, we devise an efficient algorithm to screen for low-energy surface orientations, even if they have high (hkl) miller indices. We successfully predict the observed low-energy, high-index { 10 12 bar } and { 10 1 bar 4 } surfaces of hematite α-Fe2O3, the {311} surfaces of cuprite Cu2O, and the {112} surfaces of anatase TiO2. We further tabulate candidate low-energy surface orientations for nine of the most common binary oxide structures. Screened surfaces are found to be generally applicable across isostructural compounds with varying chemistries, although relative surface energies between facets may vary based on the preferred coordination of the surface atoms.

Initial On-Orbit Radiometric Calibration of the Suomi NPP VIIRS Reflective Solar Bands

NASA Technical Reports Server (NTRS)

Lei, Ning; Wang, Zhipeng; Fulbright, Jon; Lee, Shihyan; McIntire, Jeff; Chiang, Vincent; Xiong, Jack

2012-01-01

The on-orbit radiometric response calibration of the VISible/Near InfraRed (VISNIR) and the Short-Wave InfraRed (SWIR) bands of the Visible/Infrared Imager/Radiometer Suite (VIIRS) aboard the Suomi National Polar-orbiting Partnership (NPP) satellite is carried out through a Solar Diffuser (SD). The transmittance of the SD screen and the SD's Bidirectional Reflectance Distribution Function (BRDF) are measured before launch and tabulated, allowing the VIIRS sensor aperture spectral radiance to be accurately determined. The radiometric response of a detector is described by a quadratic polynomial of the detector?s digital number (dn). The coefficients were determined before launch. Once on orbit, the coefficients are assumed to change by a common factor: the F-factor. The radiance scattered from the SD allows the determination of the F-factor. In this Proceeding, we describe the methodology and the associated algorithms in the determination of the F-factors and discuss the results.

Detecting agricultural to urban land use change from multi-temporal MSS digital data. [Salt Lake County, Utah

NASA Technical Reports Server (NTRS)

Ridd, M. K.; Merola, J. A.; Jaynes, R. A.

1983-01-01

Conversion of agricultural land to a variety of urban uses is a major problem along the Wasatch Front, Utah. Although LANDSAT MSS data is a relatively coarse tool for discriminating categories of change in urban-size plots, its availability prompts a thorough test of its power to detect change. The procedures being applied to a test area in Salt Lake County, Utah, where the land conversion problem is acute are presented. The identity of land uses before and after conversion was determined and digital procedures for doing so were compared. Several algorithms were compared, utilizing both raw data and preprocessed data. Verification of results involved high quality color infrared photography and field observation. Two data sets were digitally registered, specific change categories internally identified in the software, results tabulated by computer, and change maps printed at 1:24,000 scale.

M-DAS: System for multispectral data analysis. [in Saginaw Bay, Michigan

NASA Technical Reports Server (NTRS)

Johnson, R. H.

1975-01-01

M-DAS is a ground data processing system designed for analysis of multispectral data. M-DAS operates on multispectral data from LANDSAT, S-192, M2S and other sources in CCT form. Interactive training by operator-investigators using a variable cursor on a color display was used to derive optimum processing coefficients and data on cluster separability. An advanced multivariate normal-maximum likelihood processing algorithm was used to produce output in various formats: color-coded film images, geometrically corrected map overlays, moving displays of scene sections, coverage tabulations and categorized CCTs. The analysis procedure for M-DAS involves three phases: (1) screening and training, (2) analysis of training data to compute performance predictions and processing coefficients, and (3) processing of multichannel input data into categorized results. Typical M-DAS applications involve iteration between each of these phases. A series of photographs of the M-DAS display are used to illustrate M-DAS operation.

An Epidemiologic Investigation of Health Effects in Air Force Personnel Following Exposure to Herbicides. Volume 2. First Followup Examination Results.

DTIC Science & Technology

1987-10-01

Ranch Hand Enlisted Flyers ... .......... ... R-14 R-1O Cross Tabulation of Pleurisy - (Abnormal, Total) by- Exposure Index Category-by-Age Category-by...by-Pack-Year Category for Ranch Hand Enlisted Groundcrew ........... .. R-19 R-15 Cross Tabulation of Pleurisy - (Abnormal, Total) by- Exposure Index

Food Tabulator. DOT No. 211.582-010. Cafeteria Occupations. Coordinator's Guide. First Edition.

ERIC Educational Resources Information Center

East Texas State Univ., Commerce. Occupational Curriculum Lab.

This study guide, one of eight individualized units developed for students enrolled in cooperative part-time training and employed in a cafeteria, is composed of information about one specific occupation; this unit focuses on the duties of the food tabulator. Materials provided in this guide for coordinator use include a student progress chart; a…

Moon view period tabulations (with station masking) for Manned Space Flight Network stations, book 1

NASA Technical Reports Server (NTRS)

Gattie, M. M.; Williams, R. L.

1970-01-01

The times during which MSFN stations can view the moon are tabulated. Station view periods for each month are given. All times and dates refer to Greenwich Mean Time. AOS and LOS refer to the center of the moon at zero degrees elevation for moon rise and set, respectively.

Indoor radon regulation using tabulated values of temporal radon variation.

PubMed

Tsapalov, Andrey; Kovler, Konstantin

2018-03-01

Mass measurements of indoor radon concentrations have been conducted for about 30 years. In most of the countries, a national reference/action/limit level is adopted, limiting the annual average indoor radon (AAIR) concentration. However, until now, there is no single and generally accepted international protocol for determining the AAIR with a known confidence interval, based on measurements of different durations. Obviously, as the duration of measurements increases, the uncertainty of the AAIR estimation decreases. The lack of the information about the confidence interval of the determined AAIR level does not allow correct comparison with the radon reference level. This greatly complicates development of an effective indoor radon measurement protocol and strategy. The paper proposes a general principle of indoor radon regulation, based on the simple criteria widely used in metrology, and introduces a new parameter - coefficient of temporal radon variation K V (t) that depends on the measurement duration and determines the uncertainty of the AAIR. An algorithm for determining K V (t) based on the results of annual continuous radon monitoring in experimental rooms is proposed. Included are indoor radon activity concentrations and equilibrium equivalent concentration (EEC) of radon progeny. The monitoring was conducted in 10 selected experimental rooms located in 7 buildings, mainly in the Moscow region (Russia), from 2006 to 2013. The experimental and tabulated values of K V (t) and also the values of the coefficient of temporal EEC variation depending on the mode and duration of the measurements were obtained. The recommendations to improve the efficiency and reliability of indoor radon regulation are given. The importance of taking into account the geological factors is discussed. The representativity of the results of the study is estimated and the approach for their verification is proposed. Copyright © 2017 Elsevier Ltd. All rights reserved.

2010 Military Family Life Project (MFLP) - Couples: Tabulations of Responses

DTIC Science & Technology

2013-08-31

interest income; dividends; child support/alimony; social security, welfare assistance; and net rent, trusts, and royalties from any other investments ...2010 Military Family Life Project: Couples Tabulations of Responses Additional copies of this report may be obtained from: Defense... RESPONSES Defense Manpower Data Center Human Resources Strategic Assessment Program 4800 Mark Center Drive, Suite 04E25-01, Alexandria, VA 22350

Network Prime-Time Violence Tabulations for 1975-76 Season.

ERIC Educational Resources Information Center

Klapper, Joseph T.

This is an annual report on violence in prime-time television. The tabulations, based on 13 weeks of monitoring prime-time programs on three networks, indicate a decline in violence by 24% and a decline in the rate per hour of dramatic violence to 1.9 incidents per hour since last season. The study also indicated that the introduction of the…

Twelve-year planetary ephemeris: 1995-2006

NASA Technical Reports Server (NTRS)

Espenak, Fred

1994-01-01

Accurate geocentric positions and physical ephemerides are tabulated for the Sun, Moon, Mercury, Venus, Mars, Jupiter, Saturn, Uranus, Neptune, and Pluto for the 12-year period 1995 through 2006. The frequency interval is 2 days for the Sun and classical planets. Uranus, Neptune, and Pluto are tabulated at 4-day intervals. Because of its rapid apparent motion, the Moon's ephemeris is given daily.

Selected yield tables for plantations and natural stands in Inland Northwest Forests

Treesearch

Albert R. Stage; David L. Renner; Roger C. Chapman

1988-01-01

Yields arrayed by site index and age have been tabulated for plantations of 500 trees per acre, with five thinning regimes, for Douglas-fir, grand fir, and western larch. Yields were also tabulated for naturally regenerated stands of the grand fir-cedar-hemlock ecosystem of the Inland Empire. All yields were estimated with the Prognosis Model for Stand Development,...

Tabulated dose uniformity ratio and minimum dose data: rectangular 60Co source plaques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Galanter, L.

1971-01-01

The data tabulated herein extend to rectangular cobalt-60 plaques the information presented for square plaques in BNL 50145 (Revised). The user is referred to BNL 50145 (Revised) and to the other reports listed for a complete discussion of the parameters involved in data generation and for instructions on the use of these data in gamma irradiator design.

Public Elementary and Secondary School Revenues and Current Expenditures for Fiscal Year 1987 (School Year 1986-87): Preliminary Tabulations. E.D. TABS.

ERIC Educational Resources Information Center

National Center for Education Statistics (ED), Washington, DC.

This document reports preliminary tabulations of public elementary and secondary school revenues and current expenditures for Fiscal Year 1987 (School Year 1986-87). Data shows revenues by local, state, intermediate, and federal sources, and current expenditures by categories of instruction, support services, noninstructional services, and fixed…

Tables of X-ray absorption corrections and dispersion corrections: the new versus the old

NASA Astrophysics Data System (ADS)

Creagh, Dudley

1990-11-01

This paper compares the data on X-ray absorption coefficients calculated by Creagh and Hubbell and tabulated in International Tables for Crystallography, vol. C, ed. A.J.C. Wilson (1990) section 4.2.4 [1] with empirical (Saloman, Hubbell and Scofield, At. Data and Nucl. Data Tables 38 (1988) 1, [6]) and semi-empirical (Hubbell, McMaster, Kerr Del Grande and Mallett, in: International Tables for Crystallography, vol. IV, eds. Ibers and Hamilton (Kynoch, Birmingham, 1974) [2]) tabulations as well as the renormalized relativistic Dirac-Hartree-Fock calculations of Scofield [6]. It also makes comparisons of the real part of the dispersion correction ƒ‧(ω, 0) and tabulated in ref. [1], with theoretical data sets (Cromer and Liberman, J. Chem. Phys. 53 (1970) 1891, and Acta Crystallogr. A37 (1981) 267 [4,5]; Wang, Phys. Rev. A34 (1986) 636 [85]; Kissel, in: Workshop Report on New Dimensions in X-ray Scattering, CONF-870459 (Livermore, 1987) p. 9 [86]) and data collected using a variety of experimental techniques. In both cases the data tabulated in ref. [1] is shown to give improved self-consistency and agreement with experiment.

WASP (Write a Scientific Paper) using Excel - 2: Pivot tables.

PubMed

Grech, Victor

2018-02-01

Data analysis at the descriptive stage and the eventual presentation of results requires the tabulation and summarisation of data. This exercise should always precede inferential statistics. Pivot tables and pivot charts are one of Excel's most powerful and underutilised features, with tabulation functions that immensely facilitate descriptive statistics. Pivot tables permit users to dynamically summarise and cross-tabulate data, create tables in several dimensions, offer a range of summary statistics and can be modified interactively with instant outputs. Large and detailed datasets are thereby easily manipulated making pivot tables arguably the best way to explore, summarise and present data from many different angles. This second paper in the WASP series in Early Human Development provides pointers for pivot table manipulation in Excel™. Copyright © 2018 Elsevier B.V. All rights reserved.

Expansion of Tabulated Scattering Matrices in Generalized Spherical Functions

NASA Technical Reports Server (NTRS)

Mishchenko, Michael I.; Geogdzhayev, Igor V.; Yang, Ping

2016-01-01

An efficient way to solve the vector radiative transfer equation for plane-parallel turbid media is to Fourier-decompose it in azimuth. This methodology is typically based on the analytical computation of the Fourier components of the phase matrix and is predicated on the knowledge of the coefficients appearing in the expansion of the normalized scattering matrix in generalized spherical functions. Quite often the expansion coefficients have to be determined from tabulated values of the scattering matrix obtained from measurements or calculated by solving the Maxwell equations. In such cases one needs an efficient and accurate computer procedure converting a tabulated scattering matrix into the corresponding set of expansion coefficients. This short communication summarizes the theoretical basis of this procedure and serves as the user guide to a simple public-domain FORTRAN program.

Web server to identify similarity of amino acid motifs to compounds (SAAMCO).

PubMed

Casey, Fergal P; Davey, Norman E; Baran, Ivan; Varekova, Radka Svobodova; Shields, Denis C

2008-07-01

Protein-protein interactions are fundamental in mediating biological processes including metabolism, cell growth, and signaling. To be able to selectively inhibit or induce protein activity or complex formation is a key feature in controlling disease. For those situations in which protein-protein interactions derive substantial affinity from short linear peptide sequences, or motifs, we can develop search algorithms for peptidomimetic compounds that resemble the short peptide's structure but are not compromised by poor pharmacological properties. SAAMCO is a Web service ( http://bioware.ucd.ie/ approximately saamco) that facilitates the screening of motifs with known structures against bioactive compound databases. It is built on an algorithm that defines compound similarity based on the presence of appropriate amino acid side chain fragments and a favorable Root Mean Squared Deviation (RMSD) between compound and motif structure. The methodology is efficient as the available compound databases are preprocessed and fast regular expression searches filter potential matches before time-intensive 3D superposition is performed. The required input information is minimal, and the compound databases have been selected to maximize the availability of information on biological activity. "Hits" are accompanied with a visualization window and links to source database entries. Motif matching can be defined on partial or full similarity which will increase or reduce respectively the number of potential mimetic compounds. The Web server provides the functionality for rapid screening of known or putative interaction motifs against prepared compound libraries using a novel search algorithm. The tabulated results can be analyzed by linking to appropriate databases and by visualization.

15 CFR 101.1 - Report of tabulations of population to states and localities pursuant to 13 U.S.C. 141(c).

Code of Federal Regulations, 2010 CFR

2010-01-01

... localities pursuant to 13 U.S.C. 141(c). The determination of the Secretary will be published in the Federal... until after he or she receives the recommendation of the Director of the Census, together with the... Director of the Census analyzing the methodologies that may be used in making the tabulations of population...

Degrees Conferred by Postsecondary Institutions in South Carolina, Academic Years 1976-77 and 1977-78.

ERIC Educational Resources Information Center

South Carolina Commission on Higher Education, Columbia.

This tabulation of academic degrees and other awards has been compiled by the South Carolina Commission on Higher Education primarily as an aid to institutions and to state-wide planning for postsecondary education. The data are tabulated from information furnished to the Commission and to the U. S. Office of Education on OE Form 2300 - 2.l…

Power law relationships for rain attenuation and reflectivity

NASA Technical Reports Server (NTRS)

Devasirvatham, D. M. J.; Hodge, D. B.

1978-01-01

The equivalent reflectivity, specific attenuation and volumetric backscatter cross section of rain are calculated and tabulated at a number of frequencies from 1 to 500 GHz using classical Mie theory. The first two parameters are shown to be closely approximated as functions of rain rate by the power law aR to the b power. The a's and b's are also tabulated and plotted for convenient reference.

The impact of low-level lead toxicity on school performance among children in the Chicago Public Schools: a population-based retrospective cohort study.

PubMed

Evens, Anne; Hryhorczuk, Daniel; Lanphear, Bruce P; Rankin, Kristin M; Lewis, Dan A; Forst, Linda; Rosenberg, Deborah

2015-04-07

Environmental lead exposure poses a risk to educational performance, especially among poor, urban children. Previous studies found low-level lead exposure was a risk factor for diminished academic abilities, however, this study is distinct because of the very large sample size and because it controlled for very low birth weight and early preterm birth-two factors closely associated with lower academic performance. In this study we examined the association between lead concentration in whole blood (B-Pb) of Chicago Public School (CPS) children and their performance on the 3(rd) grade Illinois Standard Achievement Tests (ISAT) reading and math scores. We examined 58,650 children born in Chicago between 1994 and 1998 who were tested for blood lead concentration between birth and 2006 and enrolled in the 3(rd) grade at a CPS school between 2003 and 2006. We linked the Chicago birth registry, the Chicago Blood Lead Registry, and 3(rd) grade ISAT scores to examine associations between B-Pb and school performance. After adjusting for other predictors of school performance including poverty, race/ethnicity, gender, maternal education and very low birth weight or preterm-birth, we found that B-Pbs below 10 μg/dL were inversely associated with reading and math scores in 3(rd) grade children. For a 5 μg/dL increase in B-Pb, the risk of failing increased by 32% for reading (RR = 1.32, 95%CI = 1.26, 1.39) and math (RR = 1.32, 95%CI = 1.26, 1.39). The effect of lead on reading was non-linear with steeper failure rates at lower B-Pbs. We estimated that 13% of reading failure and 14.8% of math failure can be attributed to exposure to blood lead concentrations of 5 to 9 vs. 0 to 4 μg/dL in Chicago school children. Early childhood lead exposure is associated with poorer achievement on standardized reading and math tests in the third grade, even at very low B-Pbs. Preventing lead exposure in early childhood is critical to improving school performance.

DARTAB: a program to combine airborne radionuclide environmental exposure data with dosimetric and health effects data to generate tabulations of predicted health impacts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Begovich, C.L.; Eckerman, K.F.; Schlatter, E.C.

1981-08-01

The DARTAB computer code combines radionuclide environmental exposure data with dosimetric and health effects data to generate tabulations of the predicted impact of radioactive airborne effluents. DARTAB is independent of the environmental transport code used to generate the environmental exposure data and the codes used to produce the dosimetric and health effects data. Therefore human dose and risk calculations need not be added to every environmental transport code. Options are included in DARTAB to permit the user to request tabulations by various topics (e.g., cancer site, exposure pathway, etc.) to facilitate characterization of the human health impacts of the effluents.more » The DARTAB code was written at ORNL for the US Environmental Protection Agency, Office of Radiation Programs.« less

Normal- and oblique-shock flow parameters in equilibrium air including attached-shock solutions for surfaces at angles of attack, sweep, and dihedral

NASA Technical Reports Server (NTRS)

Hunt, J. L.; Souders, S. W.

1975-01-01

Normal- and oblique-shock flow parameters for air in thermochemical equilibrium are tabulated as a function of shock angle for altitudes ranging from 15.24 km to 91.44 km in increments of 7.62 km at selected hypersonic speeds. Post-shock parameters tabulated include flow-deflection angle, velocity, Mach number, compressibility factor, isentropic exponent, viscosity, Reynolds number, entropy difference, and static pressure, temperature, density, and enthalpy ratios across the shock. A procedure is presented for obtaining oblique-shock flow properties in equilibrium air on surfaces at various angles of attack, sweep, and dihedral by use of the two-dimensional tabulations. Plots of the flow parameters against flow-deflection angle are presented at altitudes of 30.48, 60.96, and 91.44 km for various stream velocities.

Experimental study of a generic high-speed civil transport: Tabulated data

NASA Technical Reports Server (NTRS)

Belton, Pamela S.; Campbell, Richard L.

1992-01-01

An experimental study of a generic high-speed civil transport was conducted in LaRC's 8-Foot Transonic Pressure Tunnel. The data base was obtained for the purpose of assessing the accuracy of various levels of computational analysis. Two models differing only in wing tip geometry were tested with and without flow-through nacelles. The baseline model has a curved or crescent wing tip shape while the second model has a more conventional straight wing tip shape. The study was conducted at Mach numbers from 0.30-1.19. Force data were obtained on both the straight and curved wing tip models. Only the curved wing tip model was instrumented for measuring pressures. Longitudinal and lateral-directional aerodynamic data are presented without analysis in tabulated form. Pressure coefficients for the curved wing tip model are also presented in tabulated form.

2012 Survey of Reserve Components Spouses (RCSS): Tabulations of Responses

DTIC Science & Technology

2012-09-30

injury/medical problems Child care problems Other family/personal obligation Maternity / paternity leave Labor dispute Weather affected job School...Did you interact with the unit or Service point of contact? ............................. 262  36.  How satisfied are you with the level of assistance...I did not interact with the unit or Service point of contact were tabulated separately, as responses to the constructed question Did you interact

2015 Workplace and Gender Relations Survey of Reserve Component Members: Tabulations of Responses

DTIC Science & Technology

2016-03-17

Report 6. AUTHOR(S) DefenseResearch, Surveys,andStatistics Center (RSSC) 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Defense Manpower Data Center...2015 WORKPLACE AND GENDER RELATIONS SURVEY OF RESERVE COMPONENT MEMBERS: TABULATIONS OF RESPONSES Defense Manpower Data Center Defense Research...Surveys, and Statistics Center 4800 Mark Center Drive, Suite 04E25-01, Alexandria, VA 22350-4000 ii DMDC Acknowledgments The Defense Manpower Data

Annual peak discharges from small drainage areas in Montana through September 1978

USGS Publications Warehouse

Omang, R.J.; Parrett, C.; Hull, J.A.

1979-01-01

Annual peak stage and discharge data have been collected and tabulated for crest-stage gaging sites in Montana. The crest-stage program was begun in July 1955 to investigate the magnitude and frequency of floods from small drainage areas. The program has expanded from 45 crest-stage gaging stations initially to 173 stations maintained in 1978. Data are tabulated for the period of record. (Woodard-USGS)

Effects of Organic Solvents on Indigo Formation by Pseudomonas sp. strain ST-200 Grown with High Levels of Indole.

PubMed

Doukyu, N; Arai, T; Aono, R

1998-01-01

The indole tolerance level of Pseudomonas sp. strain ST-200 was 0.25 mg/ml. The level was raised to 4 mg/ml when diphenylmethane was added to the medium to 20% by volume. ST-200 grown in this two-phase culture system containing indole (1 mg/ml) and diphenylmethane (0.2 ml/ml) produced a water-soluble yellow pigment, isatic acid, and two water-insoluble and diphenylmethane-soluble pigments, blue indigo and purple indirubin. The amounts of the water-insoluble pigments corresponded to 0.5% (indigo) and 0.2% (indirubin) of the indole added to the medium. Of the conditions tried, indigo and indirubin were formed only when ST-200 was grown in the two-phase system overlaid with organic solvents with appropriate polarity.

Fragment-to-Lead Medicinal Chemistry Publications in 2015.

PubMed

Johnson, Christopher N; Erlanson, Daniel A; Murray, Christopher W; Rees, David C

2017-01-12

Fragment-based drug discovery (FBDD) is now well-established as a technology for generating new chemical leads and drugs. This Miniperspective provides a tabulated overview of the fragment-to-lead literature published in the year 2015, together with a commentary on trends observed across the FBDD field during this time. It is hoped that this tabulated summary will provide a useful point of reference for both FBDD practitioners and the wider medicinal chemistry community.

2017 Workplace and Gender Relations Survey of Reserve Component Members: Tabulations of Responses

DTIC Science & Technology

2018-04-30

2017 Workplace and Gender Relations Survey of Reserve Component Members Tabulations of Responses Additional copies of this report may be...http://www.dtic.mil/dtic/order.html Ask for report by DTIC# OPA Report No. 2018-012 April 2018 2017 Workplace and Gender Relations Survey of...Alexandria, VA 22350-4000 2017 Workplace and Gender Relations Survey of Reserve Component Members ii OPA Acknowledgments The Office of People Analytics

Annual peak discharges from small drainage areas in Montana through September 1977

USGS Publications Warehouse

Omang, R.J.; Hull, J.A.

1978-01-01

Annual peak stage and stream-discharge data have been collected and tabulated for crest-stage gaging sites in Montana. The crest-stage program was begun in July 1955 to investigate the magnitude and frequency of floods from small drainage areas. The program has expanded from 45 crest-stage gaging stations initially to 191 stations in 1977. Data are tabulated for 336 sites throughout the period of record. (Woodard-USGS)

Annual peak discharges from small drainage areas in Montana through September 1980

USGS Publications Warehouse

Omang, R.J.; Parrett, Charles; Hull, J.A.

1955-01-01

Annual peak stage and discharge data have been collected and tabulated for crest-stage gaging sites in Montana. The crest-stage program was begun in July 1955 to investigate the magnitude and frequency of floods from small drainage areas. The program has expanded from 45 crest-stage gaging stations initially to 172 stations maintained in 1980. Data in the report are tabulated for the period of record. (USGS)

Annual peak discharges from small drainage areas in Montana through September 1979

USGS Publications Warehouse

Omang, R.J.; Parrett, C.; Hull, J.A.

1955-01-01

Annual peak stage and discharge data have been collected and tabulated for crest-stage gaging sites in Montana. The crest-stage program was begun in July 1955 to investigate the magnitude and frequency of floods from small drainage areas. The program has expanded from 45 crest-stage gaging stations initially to 173 stations maintained in 1979. Data in the report are tabulated for the period of record. (USGS)

Current research on aviation weather (bibliography), 1979

NASA Technical Reports Server (NTRS)

Turkel, B. S.; Frost, W.

1980-01-01

The titles, managers, supporting organizations, performing organizations, investigators and objectives of 127 current research projects in advanced meteorological instruments, forecasting, icing, lightning, visibility, low level wind shear, storm hazards/severe storms, and turbulence are tabulated and cross-referenced. A list of pertinent reference material produced through the above tabulated research activities is given. The acquired information is assembled in bibliography form to provide a readily available source of information in the area of aviation meteorology.

UniGene Tabulator: a full parser for the UniGene format.

PubMed

Lenzi, Luca; Frabetti, Flavia; Facchin, Federica; Casadei, Raffaella; Vitale, Lorenza; Canaider, Silvia; Carinci, Paolo; Zannotti, Maria; Strippoli, Pierluigi

2006-10-15

UniGene Tabulator 1.0 provides a solution for full parsing of UniGene flat file format; it implements a structured graphical representation of each data field present in UniGene following import into a common database managing system usable in a personal computer. This database includes related tables for sequence, protein similarity, sequence-tagged site (STS) and transcript map interval (TXMAP) data, plus a summary table where each record represents a UniGene cluster. UniGene Tabulator enables full local management of UniGene data, allowing parsing, querying, indexing, retrieving, exporting and analysis of UniGene data in a relational database form, usable on Macintosh (OS X 10.3.9 or later) and Windows (2000, with service pack 4, XP, with service pack 2 or later) operating systems-based computers. The current release, including both the FileMaker runtime applications, is freely available at http://apollo11.isto.unibo.it/software/

Comparative evaluation of the Bio-Rad Geenius HIV-1/2 Confirmatory Assay and the Bio-Rad Multispot HIV-1/2 Rapid Test as an alternative differentiation assay for CLSI M53 algorithm-I.

PubMed

Malloch, L; Kadivar, K; Putz, J; Levett, P N; Tang, J; Hatchette, T F; Kadkhoda, K; Ng, D; Ho, J; Kim, J

2013-12-01

The CLSI-M53-A, Criteria for Laboratory Testing and Diagnosis of Human Immunodeficiency Virus (HIV) Infection; Approved Guideline includes an algorithm in which samples that are reactive on a 4th generation EIA screen proceed to a supplemental assay that is able to confirm and differentiate between antibodies to HIV-1 and HIV-2. The recently CE-marked Bio-Rad Geenius HIV-1/2 Confirmatory Assay was evaluated as an alternative to the FDA-approved Bio-Rad Multispot HIV-1/HIV-2 Rapid Test which has been previously validated for use in this new algorithm. This study used reference samples submitted to the Canadian - NLHRS and samples from commercial sources. Data was tabulated in 2×2 tables for statistical analysis; sensitivity, specificity, predictive values, kappa and likelihood ratios. The overall performance of the Geenius and Multispot was very high; sensitivity (100%, 100%), specificity (96.3%, 99.1%), positive (45.3, 181) and negative (0, 0) likelihood ratios respectively, high kappa (0.96) and low bias index (0.0068). The ability to differentiate HIV-1 (99.2%, 100%) and HIV-2 (98.1%, 98.1%) Ab was also very high. The Bio-Rad Geenius HIV-1/2 Confirmatory Assay is a suitable alternative to the validated Multispot for use in the second stage of CLSI M53 algorithm-I. The Geenius has additional features including traceability and sample and cassette barcoding that improve the quality management/assurance of HIV testing. It is anticipated that the CLSI M53 guideline and assays such as the Geenius will reduce the number of indeterminate test results previously associated with the HIV-1 WB and improve the ability to differentiate HIV-2 infections. Crown Copyright © 2013. Published by Elsevier B.V. All rights reserved.

Evolutionary Distance of Amino Acid Sequence Orthologs across Macaque Subspecies: Identifying Candidate Genes for SIV Resistance in Chinese Rhesus Macaques

PubMed Central

Ross, Cody T.; Roodgar, Morteza; Smith, David Glenn

2015-01-01

We use the Reciprocal Smallest Distance (RSD) algorithm to identify amino acid sequence orthologs in the Chinese and Indian rhesus macaque draft sequences and estimate the evolutionary distance between such orthologs. We then use GOanna to map gene function annotations and human gene identifiers to the rhesus macaque amino acid sequences. We conclude methodologically by cross-tabulating a list of amino acid orthologs with large divergence scores with a list of genes known to be involved in SIV or HIV pathogenesis. We find that many of the amino acid sequences with large evolutionary divergence scores, as calculated by the RSD algorithm, have been shown to be related to HIV pathogenesis in previous laboratory studies. Four of the strongest candidate genes for SIVmac resistance in Chinese rhesus macaques identified in this study are CDK9, CXCL12, TRIM21, and TRIM32. Additionally, ANKRD30A, CTSZ, GORASP2, GTF2H1, IL13RA1, MUC16, NMDAR1, Notch1, NT5M, PDCD5, RAD50, and TM9SF2 were identified as possible candidates, among others. We failed to find many laboratory experiments contrasting the effects of Indian and Chinese orthologs at these sites on SIVmac pathogenesis, but future comparative studies might hold fertile ground for research into the biological mechanisms underlying innate resistance to SIVmac in Chinese rhesus macaques. PMID:25884674

Definition of a Robust Supervisory Control Scheme for Sodium-Cooled Fast Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ponciroli, R.; Passerini, S.; Vilim, R. B.

In this work, an innovative control approach for metal-fueled Sodium-cooled Fast Reactors is proposed. With respect to the classical approach adopted for base-load Nuclear Power Plants, an alternative control strategy for operating the reactor at different power levels by respecting the system physical constraints is presented. In order to achieve a higher operational flexibility along with ensuring that the implemented control loops do not influence the system inherent passive safety features, a dedicated supervisory control scheme for the dynamic definition of the corresponding set-points to be supplied to the PID controllers is designed. In particular, the traditional approach based onmore » the adoption of tabulated lookup tables for the set-point definition is found not to be robust enough when failures of the implemented SISO (Single Input Single Output) actuators occur. Therefore, a feedback algorithm based on the Reference Governor approach, which allows for the optimization of reference signals according to the system operating conditions, is proposed.« less

The latitudinal distribution of ozone to 35 km altitude from ECC ozonesonde observations, 1982-1990

NASA Technical Reports Server (NTRS)

Komhyr, W. D.; Oltmans, S. J.; Lathrop, J. A.; Kerr, J. B.; Matthews, W. A.

1994-01-01

Electrochemical concentration cell (ECC) ozone-sonde observations, made in recent years at ten stations whose locations range from the Arctic to Antarctica, have yielded a self-consistent ozone data base from which mean seasonal and annual latitudinal ozone vertical distributions to 35 km have been derived. Ozone measurement uncertainties are estimated, and results are presented in the Bass-Paur (1985) ozone absorption coefficient scale adopted for use with Dobson ozone spectrophotometers January 1, 1992. The data should be useful for comparison with model calculations of the global distribution of atmospheric ozone, for serving as apriori statistical information in deriving ozone vertical distributions from satellite and Umkehr observations, and for improving the satellite and Umkehr ozone inversion algorithms. Attention is drawn to similar results based on a less comprehensive data set published in Ozone in the Atmosphere, Proceedings of the 1988 Quadrennial Ozone Symposium where errors in data tabulations occurred for three of the stations due to inadvertent transposition of ozone partial pressure and air temperature values.

Far-Field Lorenz-Mie Scattering in an Absorbing Host Medium: Theoretical Formalism and FORTRAN Program

NASA Technical Reports Server (NTRS)

Mishchenko, Michael I.; Yang, Ping

2018-01-01

In this paper we make practical use of the recently developed first-principles approach to electromagnetic scattering by particles immersed in an unbounded absorbing host medium. Specifically, we introduce an actual computational tool for the calculation of pertinent far-field optical observables in the context of the classical Lorenzâ€"Mie theory. The paper summarizes the relevant theoretical formalism, explains various aspects of the corresponding numerical algorithm, specifies the input and output parameters of a FORTRAN program available at https://www.giss.nasa.gov/staff/mmishchenko/Lorenz-Mie.html, and tabulates benchmark results useful for testing purposes. This public-domain FORTRAN program enables one to solve the following two important problems: (i) simulate theoretically the reading of a remote well-collimated radiometer measuring electromagnetic scattering by an individual spherical particle or a small random group of spherical particles; and (ii) compute the single-scattering parameters that enter the vector radiative transfer equation derived directly from the Maxwell equations.

Far-field Lorenz-Mie scattering in an absorbing host medium: Theoretical formalism and FORTRAN program

NASA Astrophysics Data System (ADS)

Mishchenko, Michael I.; Yang, Ping

2018-01-01

In this paper we make practical use of the recently developed first-principles approach to electromagnetic scattering by particles immersed in an unbounded absorbing host medium. Specifically, we introduce an actual computational tool for the calculation of pertinent far-field optical observables in the context of the classical Lorenz-Mie theory. The paper summarizes the relevant theoretical formalism, explains various aspects of the corresponding numerical algorithm, specifies the input and output parameters of a FORTRAN program available at https://www.giss.nasa.gov/staff/mmishchenko/Lorenz-Mie.html, and tabulates benchmark results useful for testing purposes. This public-domain FORTRAN program enables one to solve the following two important problems: (i) simulate theoretically the reading of a remote well-collimated radiometer measuring electromagnetic scattering by an individual spherical particle or a small random group of spherical particles; and (ii) compute the single-scattering parameters that enter the vector radiative transfer equation derived directly from the Maxwell equations.

Fe II emission lines. I - Chromospheric spectra of red giants

NASA Technical Reports Server (NTRS)

Judge, P. G.; Jordan, C.

1991-01-01

A 'difference filtering' algorithm developed by Ayers (1979) is used to construct high-quality high-dispersion long-wavelength IUE spectra of three giant stars. Measurements of all the emission lines seen between 2230 and 3100 A are tabulated. The emission spectrum of Fe II is discussed in comparison with other lines whose formation mechanisms are well understood. Systematic changes in the Fe II spectrum are related to the different physical conditions in the three stars, and examples are given of line profiles and ratios which can be used to determine conditions in the outer atomspheres of giants. It is concluded that most of the Fe II emission results from collisional excitation and/or absorption of photospheric photons at optical wavelengths, but some lines are formed by fluorescence, being photoexcited by other strong chromospheric lines. Between 10 and 20 percent of the radiative losses of Fe II arise from 10 eV levels radiatively excited by the strong chromospheric H Ly-alpha line.

Comparison of Algorithm-based Estimates of Occupational Diesel Exhaust Exposure to Those of Multiple Independent Raters in a Population-based Case–Control Study

PubMed Central

Friesen, Melissa C.

2013-01-01

Objectives: Algorithm-based exposure assessments based on patterns in questionnaire responses and professional judgment can readily apply transparent exposure decision rules to thousands of jobs quickly. However, we need to better understand how algorithms compare to a one-by-one job review by an exposure assessor. We compared algorithm-based estimates of diesel exhaust exposure to those of three independent raters within the New England Bladder Cancer Study, a population-based case–control study, and identified conditions under which disparities occurred in the assessments of the algorithm and the raters. Methods: Occupational diesel exhaust exposure was assessed previously using an algorithm and a single rater for all 14 983 jobs reported by 2631 study participants during personal interviews conducted from 2001 to 2004. Two additional raters independently assessed a random subset of 324 jobs that were selected based on strata defined by the cross-tabulations of the algorithm and the first rater’s probability assessments for each job, oversampling their disagreements. The algorithm and each rater assessed the probability, intensity and frequency of occupational diesel exhaust exposure, as well as a confidence rating for each metric. Agreement among the raters, their aggregate rating (average of the three raters’ ratings) and the algorithm were evaluated using proportion of agreement, kappa and weighted kappa (κw). Agreement analyses on the subset used inverse probability weighting to extrapolate the subset to estimate agreement for all jobs. Classification and Regression Tree (CART) models were used to identify patterns in questionnaire responses that predicted disparities in exposure status (i.e., unexposed versus exposed) between the first rater and the algorithm-based estimates. Results: For the probability, intensity and frequency exposure metrics, moderate to moderately high agreement was observed among raters (κw = 0.50–0.76) and between the algorithm and the individual raters (κw = 0.58–0.81). For these metrics, the algorithm estimates had consistently higher agreement with the aggregate rating (κw = 0.82) than with the individual raters. For all metrics, the agreement between the algorithm and the aggregate ratings was highest for the unexposed category (90–93%) and was poor to moderate for the exposed categories (9–64%). Lower agreement was observed for jobs with a start year <1965 versus ≥1965. For the confidence metrics, the agreement was poor to moderate among raters (κw = 0.17–0.45) and between the algorithm and the individual raters (κw = 0.24–0.61). CART models identified patterns in the questionnaire responses that predicted a fair-to-moderate (33–89%) proportion of the disagreements between the raters’ and the algorithm estimates. Discussion: The agreement between any two raters was similar to the agreement between an algorithm-based approach and individual raters, providing additional support for using the more efficient and transparent algorithm-based approach. CART models identified some patterns in disagreements between the first rater and the algorithm. Given the absence of a gold standard for estimating exposure, these patterns can be reviewed by a team of exposure assessors to determine whether the algorithm should be revised for future studies. PMID:23184256

Experimental aerodynamic and acoustic model testing of the Variable Cycle Engine (VCE) testbed coannular exhaust nozzle system: Comprehensive data report

NASA Technical Reports Server (NTRS)

Nelson, D. P.; Morris, P. M.

1980-01-01

The component detail design drawings of the one sixth scale model of the variable cycle engine testbed demonstrator exhaust syatem tested are presented. Also provided are the basic acoustic and aerodynamic data acquired during the experimental model tests. The model drawings, an index to the acoustic data, an index to the aerodynamic data, tabulated and graphical acoustic data, and the tabulated aerodynamic data and graphs are discussed.

Tables of branching ratios for electric dipole transitions between arbitrary levels of hydrogen-like atoms

NASA Technical Reports Server (NTRS)

Omidvar, K.

1977-01-01

The branching ratios in hydrogen-like atoms due to the electric-dipole transitions are tabulated for the initial principal and azimuthal quantum numbers n prime l prime, and final principal and azimuthal quantum numbers n l. Average values with respect to l prime are given. The branching ratios not tabulated, including the initial states n prime yields infinity l prime corresponding to the threshold of the continuum, could be obtained by extrapolation.

Lamb Shift of n = 1 and n = 2 States of Hydrogen-like Atoms, 1 ≤ Z ≤ 110

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yerokhin, V. A.; Shabaev, V. M.

2015-09-15

Theoretical energy levels of the n = 1 and n = 2 states of hydrogen-like atoms with the nuclear charge numbers 1 ≤ Z ≤ 110 are tabulated. The tabulation is based on ab initio quantum electrodynamics calculations performed to all orders in the nuclear binding strength parameter Zα, where α is the fine structure constant. Theoretical errors due to various effects are critically examined and estimated.

A risk adjustment approach to estimating the burden of skin disease in the United States.

PubMed

Lim, Henry W; Collins, Scott A B; Resneck, Jack S; Bolognia, Jean; Hodge, Julie A; Rohrer, Thomas A; Van Beek, Marta J; Margolis, David J; Sober, Arthur J; Weinstock, Martin A; Nerenz, David R; Begolka, Wendy Smith; Moyano, Jose V

2018-01-01

Direct insurance claims tabulation and risk adjustment statistical methods can be used to estimate health care costs associated with various diseases. In this third manuscript derived from the new national Burden of Skin Disease Report from the American Academy of Dermatology, a risk adjustment method that was based on modeling the average annual costs of individuals with or without specific diseases, and specifically tailored for 24 skin disease categories, was used to estimate the economic burden of skin disease. The results were compared with the claims tabulation method used in the first 2 parts of this project. The risk adjustment method estimated the direct health care costs of skin diseases to be $46 billion in 2013, approximately $15 billion less than estimates using claims tabulation. For individual skin diseases, the risk adjustment cost estimates ranged from 11% to 297% of those obtained using claims tabulation for the 10 most costly skin disease categories. Although either method may be used for purposes of estimating the costs of skin disease, the choice of method will affect the end result. These findings serve as an important reference for future discussions about the method chosen in health care payment models to estimate both the cost of skin disease and the potential cost impact of care changes. Copyright © 2017 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

Tabulation as a high-resolution alternative to coarse-graining protein interactions: Initial application to virus capsid subunits

NASA Astrophysics Data System (ADS)

Spiriti, Justin; Zuckerman, Daniel M.

2015-12-01

Traditional coarse-graining based on a reduced number of interaction sites often entails a significant sacrifice of chemical accuracy. As an alternative, we present a method for simulating large systems composed of interacting macromolecules using an energy tabulation strategy previously devised for small rigid molecules or molecular fragments [S. Lettieri and D. M. Zuckerman, J. Comput. Chem. 33, 268-275 (2012); J. Spiriti and D. M. Zuckerman, J. Chem. Theory Comput. 10, 5161-5177 (2014)]. We treat proteins as rigid and construct distance and orientation-dependent tables of the interaction energy between them. Arbitrarily detailed interactions may be incorporated into the tables, but as a proof-of-principle, we tabulate a simple α-carbon Gō-like model for interactions between dimeric subunits of the hepatitis B viral capsid. This model is significantly more structurally realistic than previous models used in capsid assembly studies. We are able to increase the speed of Monte Carlo simulations by a factor of up to 6700 compared to simulations without tables, with only minimal further loss in accuracy. To obtain further enhancement of sampling, we combine tabulation with the weighted ensemble (WE) method, in which multiple parallel simulations are occasionally replicated or pruned in order to sample targeted regions of a reaction coordinate space. In the initial study reported here, WE is able to yield pathways of the final ˜25% of the assembly process.

Algorithm to find high density EEG scalp coordinates and analysis of their correspondence to structural and functional regions of the brain

PubMed Central

Giacometti, Paolo; Perdue, Katherine L.; Diamond, Solomon G.

2014-01-01

Background Interpretation and analysis of electroencephalography (EEG) measurements relies on the correspondence of electrode scalp coordinates to structural and functional regions of the brain. New Method An algorithm is introduced for automatic calculation of the International 10–20, 10-10, and 10-5 scalp coordinates of EEG electrodes on a boundary element mesh of a human head. The EEG electrode positions are then used to generate parcellation regions of the cerebral cortex based on proximity to the EEG electrodes. Results The scalp electrode calculation method presented in this study effectively and efficiently identifies EEG locations without prior digitization of coordinates. The average of electrode proximity parcellations of the cortex were tabulated with respect to structural and functional regions of the brain in a population of 20 adult subjects. Comparison with Existing Methods Parcellations based on electrode proximity and EEG sensitivity were compared. The parcellation regions based on sensitivity and proximity were found to have 44.0 ± 11.3% agreement when demarcated by the International 10–20, 32.4 ± 12.6% by the 10-10, and 24.7 ± 16.3% by the 10-5 electrode positioning system. Conclusions The EEG positioning algorithm is a fast and easy method of locating EEG scalp coordinates without the need for digitized electrode positions. The parcellation method presented summarizes the EEG scalp locations with respect to brain regions without computation of a full EEG forward model solution. The reference table of electrode proximity versus cortical regions may be used by experimenters to select electrodes that correspond to anatomical and functional regions of interest. PMID:24769168

Algorithm to find high density EEG scalp coordinates and analysis of their correspondence to structural and functional regions of the brain.

PubMed

Giacometti, Paolo; Perdue, Katherine L; Diamond, Solomon G

2014-05-30

Interpretation and analysis of electroencephalography (EEG) measurements relies on the correspondence of electrode scalp coordinates to structural and functional regions of the brain. An algorithm is introduced for automatic calculation of the International 10-20, 10-10, and 10-5 scalp coordinates of EEG electrodes on a boundary element mesh of a human head. The EEG electrode positions are then used to generate parcellation regions of the cerebral cortex based on proximity to the EEG electrodes. The scalp electrode calculation method presented in this study effectively and efficiently identifies EEG locations without prior digitization of coordinates. The average of electrode proximity parcellations of the cortex were tabulated with respect to structural and functional regions of the brain in a population of 20 adult subjects. Parcellations based on electrode proximity and EEG sensitivity were compared. The parcellation regions based on sensitivity and proximity were found to have 44.0 ± 11.3% agreement when demarcated by the International 10-20, 32.4 ± 12.6% by the 10-10, and 24.7 ± 16.3% by the 10-5 electrode positioning system. The EEG positioning algorithm is a fast and easy method of locating EEG scalp coordinates without the need for digitized electrode positions. The parcellation method presented summarizes the EEG scalp locations with respect to brain regions without computation of a full EEG forward model solution. The reference table of electrode proximity versus cortical regions may be used by experimenters to select electrodes that correspond to anatomical and functional regions of interest. Copyright © 2014 Elsevier B.V. All rights reserved.

An equivalent dissipation rate model for capturing history effects in non-premixed flames

DOE PAGES

Kundu, Prithwish; Echekki, Tarek; Pei, Yuanjiang; ...

2016-11-11

The effects of strain rate history on turbulent flames have been studied in the. past decades with 1D counter flow diffusion flame (CFDF) configurations subjected to oscillating strain rates. In this work, these unsteady effects are studied for complex hydrocarbon fuel surrogates at engine relevant conditions with unsteady strain rates experienced by flamelets in a typical spray flame. Tabulated combustion models are based on a steady scalar dissipation rate (SDR) assumption and hence cannot capture these unsteady strain effects; even though they can capture the unsteady chemistry. In this work, 1D CFDF with varying strain rates are simulated using twomore » different modeling approaches: steady SDR assumption and unsteady flamelet model. Comparative studies show that the history effects due to unsteady SDR are directly proportional to the temporal gradient of the SDR. A new equivalent SDR model based on the history of a flamelet is proposed. An averaging procedure is constructed such that the most recent histories are given higher weights. This equivalent SDR is then used with the steady SDR assumption in 1D flamelets. Results show a good agreement between tabulated flamelet solution and the unsteady flamelet results. This equivalent SDR concept is further implemented and compared against 3D spray flames (Engine Combustion Network Spray A). Tabulated models based on steady SDR assumption under-predict autoignition and flame lift-off when compared with an unsteady Representative Interactive Flamelet (RIF) model. However, equivalent SDR model coupled with the tabulated model predicted autoignition and flame lift-off very close to those reported by the RIF model. This model is further validated for a range of injection pressures for Spray A flames. As a result, the new modeling framework now enables tabulated models with significantly lower computational cost to account for unsteady history effects.« less

An equivalent dissipation rate model for capturing history effects in non-premixed flames

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kundu, Prithwish; Echekki, Tarek; Pei, Yuanjiang

The effects of strain rate history on turbulent flames have been studied in the. past decades with 1D counter flow diffusion flame (CFDF) configurations subjected to oscillating strain rates. In this work, these unsteady effects are studied for complex hydrocarbon fuel surrogates at engine relevant conditions with unsteady strain rates experienced by flamelets in a typical spray flame. Tabulated combustion models are based on a steady scalar dissipation rate (SDR) assumption and hence cannot capture these unsteady strain effects; even though they can capture the unsteady chemistry. In this work, 1D CFDF with varying strain rates are simulated using twomore » different modeling approaches: steady SDR assumption and unsteady flamelet model. Comparative studies show that the history effects due to unsteady SDR are directly proportional to the temporal gradient of the SDR. A new equivalent SDR model based on the history of a flamelet is proposed. An averaging procedure is constructed such that the most recent histories are given higher weights. This equivalent SDR is then used with the steady SDR assumption in 1D flamelets. Results show a good agreement between tabulated flamelet solution and the unsteady flamelet results. This equivalent SDR concept is further implemented and compared against 3D spray flames (Engine Combustion Network Spray A). Tabulated models based on steady SDR assumption under-predict autoignition and flame lift-off when compared with an unsteady Representative Interactive Flamelet (RIF) model. However, equivalent SDR model coupled with the tabulated model predicted autoignition and flame lift-off very close to those reported by the RIF model. This model is further validated for a range of injection pressures for Spray A flames. As a result, the new modeling framework now enables tabulated models with significantly lower computational cost to account for unsteady history effects.« less

The 1986/87 Army Communications Objectives Measurement System: Supplementary Tabulations of Enlisted Markets

DTIC Science & Technology

1988-07-01

and SEdward 11oke (We tat) 13a. TYPE OF REPORT 13b. TIME COVERED 14. DATE OF REPORT (Year, Month, Day) 15. PAGE COUNT Interim FROM 86/10 TO 87/06...TABULATIONS OF ENLISTED MARKETS 1. INTRODUCTION The Aray Communications Objectives Measurement System survey has been designed to provide timely information to...1987. During that time 6774 youth, ages 16 through 24, com- pleted the 30 minute ACOMS youth interview. A similar volume is also available for the

Integrated system for production of neutronics and photonics calculational constants. Program SIGMA1 (Version 77-1): Doppler broaden evaluated cross sections in the Evaluated Nuclear Data File/Version B (ENDF/B) format

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cullen, D.E.

1977-01-12

A code, SIGMA1, has been designed to Doppler broaden evaluated cross sections in the ENDF/B format. The code can only be applied to tabulated data that vary linearly in energy and cross section between tabulated points. This report describes the methods used in the code and serves as a user's guide to the code.

Annual peak discharges from small drainage areas in Montana for stations discontinued before 1978

USGS Publications Warehouse

Omang, R.J.; Hull, J.A.; Parrett, Charles

1979-01-01

Annual peak stage and discharge data have been tabulated for crest-stage gage sites in Montana. The crest-stage program was begun in July 1955 to investigate the magnitude and frequency of floods from samll drainage areas. The program has expanded from 45 crest-stage gaging stations initially to 172 stations maintained in 1978. From 1955 to 1978, 156 stations have been discontinued. This report is a tabulation of the stage and discharge data for the discontinued stations. (Woodard-USGS)

Three computer codes to read, plot and tabulate operational test-site recorded solar data

NASA Technical Reports Server (NTRS)

Stewart, S. D.; Sampson, R. S., Jr.; Stonemetz, R. E.; Rouse, S. L.

1980-01-01

Computer programs used to process data that will be used in the evaluation of collector efficiency and solar system performance are described. The program, TAPFIL, reads data from an IBM 360 tape containing information (insolation, flowrates, temperatures, etc.) from 48 operational solar heating and cooling test sites. Two other programs, CHPLOT and WRTCNL, plot and tabulate the data from the direct access, unformatted TAPFIL file. The methodology of the programs, their inputs, and their outputs are described.

A Possible Tool for Checking Errors in the INAA Results, Based on Neutron Data and Method Validation

NASA Astrophysics Data System (ADS)

Cincu, Em.; Grigore, Ioana Manea; Barbos, D.; Cazan, I. L.; Manu, V.

2008-08-01

This work presents preliminary results of a new type of possible application in the INAA experiments of elemental analysis, useful to check errors occurred during investigation of unknown samples; it relies on the INAA method validation experiments and accuracy of the neutron data from the literature. The paper comprises 2 sections, the first one presents—in short—the steps of the experimental tests carried out for INAA method validation and for establishing the `ACTIVA-N' laboratory performance, which is-at the same time-an illustration of the laboratory evolution on the way to get performance. Section 2 presents our recent INAA results on CRMs, of which interpretation opens discussions about the usefulness of using a tool for checking possible errors, different from the usual statistical procedures. The questionable aspects and the requirements to develop a practical checking tool are discussed.

Substantial Goodness and Nascent Human Life.

PubMed

Floyd, Shawn

2015-09-01

Many believe that moral value is--at least to some extent--dependent on the developmental states necessary for supporting rational activity. My paper rejects this view, but does not aim simply to register objections to it. Rather, my essay aims to answer the following question: if a human being's developmental state and occurrent capacities do not bequeath moral standing, what does? The question is intended to prompt careful consideration of what makes human beings objects of moral value, dignity, or (to employ my preferred term) goodness. Not only do I think we can answer this question, I think we can show that nascent human life possesses goodness of precisely this sort. I appeal to Aquinas's metaethics to establish the conclusion that the goodness of a human being--even if that being is an embryo or fetus--resides at the substratum of her existence. If she possesses goodness, it is because human existence is good.

Physical fitness and academic performance in middle school students.

PubMed

Bass, Ronald W; Brown, Dale D; Laurson, Kelly R; Coleman, Margaret M

2013-08-01

The purpose of this study was to determine whether physical fitness is linked to academic success in middle school students. The FITNESSGRAM test battery assessed students (n = 838) in the five components of health-related fitness. The Illinois Standardized Achievement Test (ISAT) was used to assess academic achievement in reading and math. The largest correlations were seen for aerobic fitness and muscular endurance (ranging from 0.12 to 0.27, all p < 0.05). Boys in the Healthy Fitness Zone (HFZ) for aerobic fitness or muscular endurance were 2.5-3 times more likely to pass their math or reading exams. Girls in the HFZ for aerobic fitness were approximately 2-4 times as likely to meet or exceed reading and math test standards. Aerobic capacity and muscular endurance seem to positively affect academic achievement in middle school students. ©2013 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

Statistical properties of edge plasma turbulence in the Large Helical Device

NASA Astrophysics Data System (ADS)

Dewhurst, J. M.; Hnat, B.; Ohno, N.; Dendy, R. O.; Masuzaki, S.; Morisaki, T.; Komori, A.

2008-09-01

Ion saturation current (Isat) measurements made by three tips of a Langmuir probe array in the Large Helical Device are analysed for two plasma discharges. Absolute moment analysis is used to quantify properties on different temporal scales of the measured signals, which are bursty and intermittent. Strong coherent modes in some datasets are found to distort this analysis and are consequently removed from the time series by applying bandstop filters. Absolute moment analysis of the filtered data reveals two regions of power-law scaling, with the temporal scale τ ≈ 40 µs separating the two regimes. A comparison is made with similar results from the Mega-Amp Spherical Tokamak. The probability density function is studied and a monotonic relationship between connection length and skewness is found. Conditional averaging is used to characterize the average temporal shape of the largest intermittent bursts.

Modeling an Iodine Hall Thruster Plume in the Iodine Satellite (ISAT)

NASA Technical Reports Server (NTRS)

Choi, Maria

2016-01-01

An iodine-operated 200-W Hall thruster plume has been simulated using a hybrid-PIC model to predict the spacecraft surface-plume interaction for spacecraft integration purposes. For validation of the model, the plasma potential, electron temperature, ion current flux, and ion number density of xenon propellant were compared with available measurement data at the nominal operating condition. To simulate iodine plasma, various collision cross sections were found and used in the model. While time-varying atomic iodine species (i.e., I, I+, I2+) information is provided by HP Hall simulation at the discharge channel exit, the molecular iodine species (i.e., I2, I2+) are introduced as Maxwellian particles at the channel exit. Simulation results show that xenon and iodine plasma plumes appear to be very similar under the assumptions of the model. Assuming a sticking coefficient of unity, iodine deposition rate is estimated.

Modeling an Iodine Hall Thruster Plume in the Iodine Satellite (ISAT)

NASA Technical Reports Server (NTRS)

Choi, Maria

2016-01-01

An iodine-operated 200-W Hall thruster plume has been simulated using a hybrid-PIC model to predict the spacecraft surface-plume interaction for spacecraft integration purposes. For validation of the model, the plasma potential, electron temperature, ion current flux, and ion number density of xenon propellant were compared with available measurement data at the nominal operating condition. To simulate iodine plasma, various collision cross sections were found and used in the model. While time-varying atomic iodine species (i.e., I, I+, I2+) information is provided by HPHall simulation at the discharge channel exit, the molecular iodine species (i.e., I2, I2+) are introduced as Maxwellian particles at the channel exit. Simulation results show that xenon and iodine plasma plumes appear to be very similar under the assumptions of the model. Assuming a sticking coefficient of unity, iodine deposition rate is estimated.

Hydrologic data for the Larimer-Weld regional water-monitoring program, Colorado, 1975-82

USGS Publications Warehouse

Blakely, S.R.; Steinheimer, J.T.

1984-01-01

The Larimer-Weld, Colorado, regional Monitoring Program was begun in 1976 to provide information on the quality and quantity of the surface-water resources in the area. Three stations on the big Thompson River and five stations on the Cache La Poudre River were selected for a data-collection network. Four previously established stations were added to complete the data-collection network: Horsetooth Reservoir, Joe Wright Creek above and below Joe Wright Reservoir, and Michigan River near Cameron Pass. Station description, location, and period of record are given for each station. A statistical summary of the water-quality data for each station is tabulated. Frequency of occurrence is given at the 95th, 75th, 50th, and 25th percentiles. Monthly water-quality data and daily average streamflow data are tabulated for each streamflow station for which this data was collected; Monthly contents data are presented for Horsetooth Reservoir. All data tabulated and summarized are from the period October 1, 1975, through September 30, 1982. (USGS)

Opacplot2: Enabling tabulated EoS and opacity compatibility for HEDLP simulations with the FLASH code

NASA Astrophysics Data System (ADS)

Laune, Jordan; Tzeferacos, Petros; Feister, Scott; Fatenejad, Milad; Yurchak, Roman; Flocke, Norbert; Weide, Klaus; Lamb, Donald

2017-10-01

Thermodynamic and opacity properties of materials are necessary to accurately simulate laser-driven laboratory experiments. Such data are compiled in tabular format since the thermodynamic range that needs to be covered cannot be described with one single theoretical model. Moreover, tabulated data can be made available prior to runtime, reducing both compute cost and code complexity. This approach is employed by the FLASH code. Equation of state (EoS) and opacity data comes in various formats, matrix-layouts, and file-structures. We discuss recent developments on opacplot2, an open-source Python module that manipulates tabulated EoS and opacity data. We present software that builds upon opacplot2 and enables easy-to-use conversion of different table formats into the IONMIX format, the native tabular input used by FLASH. Our work enables FLASH users to take advantage of a wider range of accurate EoS and opacity tables in simulating HELP experiments at the National Laser User Facilities.

Higher-order triangular spectral element method with optimized cubature points for seismic wavefield modeling

NASA Astrophysics Data System (ADS)

Liu, Youshan; Teng, Jiwen; Xu, Tao; Badal, José

2017-05-01

The mass-lumped method avoids the cost of inverting the mass matrix and simultaneously maintains spatial accuracy by adopting additional interior integration points, known as cubature points. To date, such points are only known analytically in tensor domains, such as quadrilateral or hexahedral elements. Thus, the diagonal-mass-matrix spectral element method (SEM) in non-tensor domains always relies on numerically computed interpolation points or quadrature points. However, only the cubature points for degrees 1 to 6 are known, which is the reason that we have developed a p-norm-based optimization algorithm to obtain higher-order cubature points. In this way, we obtain and tabulate new cubature points with all positive integration weights for degrees 7 to 9. The dispersion analysis illustrates that the dispersion relation determined from the new optimized cubature points is comparable to that of the mass and stiffness matrices obtained by exact integration. Simultaneously, the Lebesgue constant for the new optimized cubature points indicates its surprisingly good interpolation properties. As a result, such points provide both good interpolation properties and integration accuracy. The Courant-Friedrichs-Lewy (CFL) numbers are tabulated for the conventional Fekete-based triangular spectral element (TSEM), the TSEM with exact integration, and the optimized cubature-based TSEM (OTSEM). A complementary study demonstrates the spectral convergence of the OTSEM. A numerical example conducted on a half-space model demonstrates that the OTSEM improves the accuracy by approximately one order of magnitude compared to the conventional Fekete-based TSEM. In particular, the accuracy of the 7th-order OTSEM is even higher than that of the 14th-order Fekete-based TSEM. Furthermore, the OTSEM produces a result that can compete in accuracy with the quadrilateral SEM (QSEM). The high accuracy of the OTSEM is also tested with a non-flat topography model. In terms of computational efficiency, the OTSEM is more efficient than the Fekete-based TSEM, although it is slightly costlier than the QSEM when a comparable numerical accuracy is required.

Predictors of Hyporesponsiveness to Erythropoiesis-Stimulating Agents in Hemodialysis Patients

PubMed Central

Kalantar-Zadeh, Kamyar; Lee, Grace H; Miller, Jessica E.; Streja, Elani; Jing, Jennie; Robertson, John A; Kovesdy, Csaba P.

2009-01-01

Background Identification of predictors of hyporesponsiveness to erythropoietin-stimulating agents (ESA) in hemodialysis (HD) patients may help improve anemia management and reduce hemoglobin variability. Study Design We conducted repeated measure and logistic regression analyses in a retrospective cohort of long-term HD patients to examine the association of iron markers and measures of renal osteodystrophy with ESA-responsiveness. The ESA-response coefficient at the individual level, i.e., the least-confounded dose-response association, was separated from the population level, assumed to represent confounding by medical indication. Setting/Participants The national database of a large dialysis organization (DaVita) with 38,328 surviving prevalent HD patients over 12 months, who received ESA for at least 3 consecutive calendar quarters, was examined. Predictors Serum levels of ferritin, iron saturation ratio (ISAT), intact parathyroid hormone (PTH) and alkaline phosphatase levels. Outcomes/Other Measurements The main outcome was case-mix adjusted hemoglobin response to quarterly averaged ESA dose at individual level. The odds ratio (OR) of the greatest vs. poorest ESA-response quartile at patient level was calculated. OR<1.0 indicated ESA hyporesponsiveness and OR>1.0 enhanced responsiveness. Results The mean (±SD) ESA-response coefficients of the least to most responsive quartiles were 0.301±0.033, 0.344±0.004, 0.357±0.004, and 0.389±0.026 g/dL higher hemoglobin per 1,000 units/week higher ESA dose in each quarter, respectively. The ORs of the greatest vs. poorest ESA-responsiveness at patient level were the following: Serum ferritin<200 ng/ml: 0.77 [95% confidence interval: 0.70–0.86] (reference: 200–500 ng/ml), ISAT<20%: 0.54 [0.49–0.59] (reference: 20–30%), intact PTH≥600 pg/ml: 0.54 [0.49–0.60] (reference: 150–300 pg/ml), and alkaline phosphatase ≥160 IU/L: 0.64 [0.58–0.70] (reference: 80–120 IU/L). Lower estimated dietary protein intake and serum levels of nutritional markers were also associated with higher risk of ESA-hyporesponsiveness. Limitations Our results may incorporate uncontrolled confounding. Achieved hemoglobin may have different associations than targeted hemoglobin. Conclusions In long-term HD patients, low iron stores, hyperparathyroidism and high turnover bone disease are associated with significant ESA-hyporesponsiveness. Prospective studies are needed to verify these associations. PMID:19339087

Erythropoietin, Iron Depletion and Relative Thrombocytosis: A Possible Explanation for Hemoglobin-Survival Paradox in Chronic Kidney Disease

PubMed Central

Streja, Elani; Kovesdy, Csaba P; Greenland, Sander; Kopple, Joel D.; McAllister, Charles J; Nissenson, Allen R; Kalantar-Zadeh, Kamyar

2017-01-01

Background High doses of human recombinant erythropoietin (rHuEPO) to achieve hemoglobin levels above 13 g/dL in chronic kidney disease appear associated with elevated mortality. Study Design We conducted logistic regression and survival analyses in a retrospective cohort of maintenance hemodialysis (MHD) patients to examine the hypothesis that the induced iron depletion with resultant relative thrombocytosis may be a possible contributor to the link between the high rHuEPO dose associated hemoglobin ≥13 g/dL and mortality. Setting & Participants The national database of a large dialysis organization (DaVita) with 40,787 MHD patients during July to December 2001 and their survival up to July 2004 were examined. Predictors Hemoglobin level, platelet count and administered rHuEPO dose during each calendar quarter. Outcomes & other Measurements Case-mix adjusted 3-year all-cause mortality; and measures of iron stores including serum ferritin and iron saturation ratio (ISAT). Results Higher platelet count was associated with lower iron stores and higher prescribed rHuEPO dose. Compared to hemoglobin of 12-13 g/dL, hemoglobin ≥13 g/dL was associated with increased mortality in the presence of relative thrombocytosis, i.e., platelet count ≥300,000/μl, (case-mix adjusted death-rate ratio [RR]: 1.21, 95% confidence limits [CL]: 1.02–1.44, P=0.03) as opposed to the absence of relative thrombocytosis (RR: 1.04, 95% CL: 0.98–1.08, P=0.13). Prescribed rHuEPO dose >20,000 units/week was associated with higher likelihood of iron depletion (ISAT<20%) and relative thrombocytosis (case-mix adjusted odds ratio: 2.53 [CL: 2.37–2.69] and 1.36 [CL: 1.30–1.42], respectively, p<0.001) and increased mortality over 3 years (death-rate ratio of 1.59, CL: 1.54, 1.65, p<0.001). Limitations Our results may incorporate uncontrolled confounding. Achieved hemoglobin may have different mortality-predictability than targeted hemoglobin. Conclusions Iron depletion and associated relative thrombocytosis might contribute to increased mortality when administering high rHuEPO doses to achieve hemoglobin ≥13 g/dL in MHD patients. Randomized trials are needed to test these observational associations. PMID:18760517

Distributions of eight meteorological variables at Cape Kennedy, Florida and Vandenberg Air Force Base, California

NASA Technical Reports Server (NTRS)

Graves, M. E.; King, R. L.; Brown, S. C.

1973-01-01

Extreme values, median values, and nine percentile values are tabulated for eight meteorological variables at Cape Kennedy, Florida and at Vandenberg Air Force Base, California. The variables are temperature, relative humidity, station pressure, water vapor pressure, water vapor mixing ratio, density, and enthalpy. For each month eight hours are tabulated, namely, 0100, 0400, 0700, 1000, 1300, 1600, 1900, and 2200 local time. These statistics are intended for general use for the space shuttle design trade-off analysis and are not to be used for specific design values.

Exact Doppler broadening of tabulated cross sections. [SIGMA 1 kernel broadening method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cullen, D.E.; Weisbin, C.R.

1976-07-01

The SIGMA1 kernel broadening method is presented to Doppler broaden to any required accuracy a cross section that is described by a table of values and linear-linear interpolation in energy-cross section between tabulated values. The method is demonstrated to have no temperature or energy limitations and to be equally applicable to neutron or charged-particle cross sections. The method is qualitatively and quantitatively compared to contemporary approximate methods of Doppler broadening with particular emphasis on the effect of each approximation introduced.

Pediatric Palliative Sedation Therapy with Propofol: Recommendations Based on Experience in Children with Terminal Cancer

PubMed Central

Hamilton, Hunter; Faughnan, Lane G.; Johnson, Liza-Marie; Baker, Justin N.

2012-01-01

Abstract Background The use of propofol for palliative sedation of children is not well documented. Objective Here we describe our experience with the use of propofol palliative sedation therapy (PST) to alleviate intractable end-of-life suffering in three pediatric oncology patients, and propose an algorithm for the selection of such candidates for PST. Patients and Methods We identified inpatients who had received propofol PST within 20 days of death at our institution between 2003 and 2010. Their medical records were reviewed for indicators of pain, suffering, and sedation from 48 hours before PST to the time of death. We also tabulated consumption of opioids and other symptom management medications, pain scores, and adverse events of propofol, and reviewed clinical notes for descriptors of suffering and/or palliation. Results Three of 192 (1.6%) inpatients (aged 6–15 years) received propofol PST at the end of life. Consumption of opioids and other supportive medications decreased during PST in two cases. In the third case, pain scores remained high and sedation was the only effective comfort measure. Clinical notes suggested improved comfort and rest in all patients. Propofol infusions were continued until the time of death. Conclusions Our experience demonstrates that propofol PST is a useful palliative option for pediatric patients experiencing intractable suffering at the end of life. We describe an algorithm that can be used to identify such children who are candidates for PST. PMID:22731512

Hardware in the Loop Testing of an Iodine-Fed Hall Thruster

NASA Technical Reports Server (NTRS)

Polzin, Kurt A.; Peeples, Steven R.; Cecil, Jim; Lewis, Brandon L.; Molina Fraticelli, Jose C.; Clark, James P.

2015-01-01

CUBESATS are relatively new spacecraft platforms that are typically deployed from a launch vehicle as a secondary payload,1 providing low-cost access to space for a wide range of end-users. These satellites are comprised of building blocks having dimensions of 10x10x10 cm cu and a mass of 1.33 kg (a 1-U size). While providing low-cost access to space, a major operational limitation is the lack of a propulsion system that can fit within a CubeSat and is capable of executing high delta v maneuvers. This makes it difficult to use CubeSats on missions requiring certain types of maneuvers (i.e. formation flying, spacecraft rendezvous). Recently, work has been performed investigating the use of iodine as a propellant for Hall-effect thrusters (HETs) 2 that could subsequently be used to provide a high specific impulse path to CubeSat propulsion. Iodine stores as a dense solid at very low pressures, making it acceptable as a propellant on a secondary payload. It has exceptionally high ?Isp (density times specific impulse), making it an enabling technology for small satellite near-term applications and providing the potential for systems-level advantages over mid-term high power electric propulsion options. Iodine flow can also be thermally regulated, subliming at relatively low temperature ( less than100 C) to yield I2 vapor at or below 50 torr. At low power, the measured performance of an iodine-fed HET is very similar to that of a state-of-the-art xenon-fed thruster. Just as importantly, the current-voltage discharge characteristics of low power iodine-fed and xenon-fed thrusters are remarkably similar, potentially reducing development and qualifications costs by making it possible to use an already-qualified xenon-HET PPU in an iodine-fed system. Finally, a cold surface can be installed in a vacuum test chamber on which expended iodine propellant can deposit. In addition, the temperature doesn't have to be extremely cold to maintain a low vapor pressure in the vacuum chamber (it is under 10(exp -6) torr at -75 C), making it possible to 'cryopump' the propellant with lower-cost recirculating refrigerant-based systems as opposed to using liquid nitrogen or low temperature gaseous helium cryopanels. In the present paper, we describe testing performed using an iodine-fed 200 W Hall thruster mounted to a thrust stand and operated in conjunction with MSFCs Small Projects Rapid Integration and Test Environment (SPRITE) Portable Hardware In the Loop (PHIL) hardware. This work is performed in support of the iodine satellite (iSAT) project, which aims to fly a 200-W iodine-fed thruster on a 12-U CubeSat. The SPRITE PHIL hardware allows a given vehicle to do a checkout of its avionics algorithm by allowing it to monitor and feed data to simulated sensors and effectors in a digital environment. These data are then used to determine the attitude of the vehicle and a separate computer is used to interpret the data set and visualize it using a 3D graphical interface. The PHIL hardware allows the testing of the vehicles bus by providing 'real' hardware interfaces (in the case of this test a real RS422 bus) and specific components can be modeled to show their interactions with the avionics algorithm (e.g. a thruster model). For the iSAT project the PHIL is used to visualize the operating cycle of the thruster and the subsequent effect this thrusting has on the attitude of the satellite over a given period of time. The test is controlled using software running on an Andrews Space Cortex 160 flight computer. This computer is the current baseline for a full iSAT mission. While the test could be conducted with a lab computer and software, the team chose to exercise the propulsion system with a representative CubeSat-class computer. For purposes of this test, the "flight" software monitored the propulsion and PPU systems, controlled operation of the thruster, and provided thruster state data to the PHIL simulation. Commands to operate the thruster were initiated from an operator's workstation outside the vacuum chamber and passed through the Cortex 160 to exercise portions of the flight avionics. Two custom-designed pieces of electronics hardware have been designed to operate the propellant feed system. One piece of hardware is an auxiliary board that controls a latch valve, proportional flow control valves (PFCVs) and valve heaters as well as measuring pressures, temperatures and PFCV feedback voltage. An onboard FPGA provides a serial link for issuing commands and manages all lower level input-output functions. The other piece of hardware is a power distribution board, which accepts a standard bus voltage input and converts this voltage into all the different current-voltage types required to operate the auxiliary board. These electronics boards are located in the vacuum chamber near the thruster, exposing this hardware to both the vacuum and plasma environments they would encounter during a mission, with these components communicating to the flight computer through an RS-422 interface. The auxiliary board FPGA provides a 28V MOSFET switch circuit with a 20ms pulse to open or close the iodine propellant feed system latch valve. The FPGA provides a pulse width modulation (PWM) signal to a DC/DC boost converter to produce the 12-120V needed for control of the proportional flow control valve. There are eight MOSFET-switched heating circuits in the system. Heaters are 28V and located in the latch valve, PFCV, propellant tank and propellant feed lines. Both the latch valve and PFCV have thermistors built into them for temperature monitoring. There are also seven resistance temperature device (RTD) circuits on the auxiliary board that can be used to measure the propellant tank and feedline temperatures. The signals are conditioned and sent to an analog to digital converter (ADC), which is directly commanded and controlled by the FPGA.

NASA's AVE 7 experiment: 25-mb sounding data

NASA Technical Reports Server (NTRS)

Davis, J. G.; Fuelberg, H. E.; Turner, R. E.

1978-01-01

The AVE 7 Experiment is described and tabulated rawinsonde data at 25 mb internals from the surface to 25 mb for the 24 stations participating in the experiment are presented. Soundings were taken between 0000GMT May 2 and 1200 GMT May 3, 1978. The methods of data processing and the accuracy are briefly discussed. Selected synoptic charts prepared from the data are presented as well as an example of contact data. A tabulation of adverse weather events that occured during the AVE 7 period, including freezing temperature, snow, tornadoes, damaging winds, and flooding, is presented.

Program to Produce Tabulated Data Set Describing NSWC Burn Model for Hydrodynamic Computations

DTIC Science & Technology

1990-09-11

helpful insights of Dr. Raafat Guirguis of the Naval Surface Warfare Center on how the NSWC Burn Model works, and Drs. Schittke and Feisler of...R. Guirguis ) 1 R13 (P. Miller ) 1 R13 (K. Kin) 2 R13 (C. Coffey) 1 R13 (H. Sandusky) 1 R13 (D. Tasker) 1 R13 (E. Lanar) 1 R13 (J. Forbes) 1 R13 (R...NAVSWC TR 90-364 AD-A238 710 PROGRAM TO PRODUCE TABULATED DATA SET DESCRIBING NSWC BURN MODEL FOR HYDRODYNAMIC COMPUTATIONS BY LEWIS C. HUDSON III

Radiometric performance of the Voyager cameras

NASA Technical Reports Server (NTRS)

Danielson, G. E.; Kupferman, P. N.; Johnson, T. V.; Soderblom, L. A.

1981-01-01

The Voyager Imaging Experiment provided high-quality data of Jupiter and the Galilean satellites with the two flyby trajectories in March and July of 1979. Moderately accurate radiometric measurements have been made using these data. This paper evaluates the radiometric results and describes the inflight and ground geometric and radiometric correction factors. The radiometric quantities of intensity I and geometric albedo I/F are derived, and scaling factors for each of the filters are tabulated for correcting the 'calibrated' data from the Image Processing Laboratory at JPL. In addition, the key characteristics of both Voyager I and Voyager 2 cameras are tabulated.

Digital computer program for nuclear reactor design water properties (LWBR Development Program)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynn, L.L.

1967-07-01

An edit program MO899 for the tabulation of thermodynamic and transport properties of liquid and vapor water, frequently used in design calculations for pressurized water nuclear reactors, is described. The data tabulated are obtained from a FORTRAN IV subroutine named HOH. Values of enthalpy, specific volume, viscosity, and thermal conductivity are given for the following ranges: pressure from one bar (14.5 psia) to 175 bars (2538 psia) and temperature from as much as 320 deg C (608 deg F) below saturation up to 500 deg C (932 deg F) above saturation. (NSA 21: 38472)

A new catalog of planetary maps

NASA Technical Reports Server (NTRS)

Batson, R. M.; Inge, J. L.

1991-01-01

A single, concise reference to all existing planetary maps, including lunar ones, is being prepared that will allow map users to identify and locate maps of their areas of interest. This will be the first such comprehensive listing of planetary maps. Although the USGS shows index maps on the collar of each map sheet, periodically publishes index maps of Mars, and provides informal listings of the USGS map database, no tabulation exists that identifies all planetary maps, including those published by DMA and other organizations. The catalog will consist of a booklet containing small-scale image maps with superimposed quadrangle boundaries and map data tabulations.

Development and Verification of a Mobile Shelter Assessment System "Rapid Assessment System of Evacuation Center Condition Featuring Gonryo and Miyagi (RASECC-GM)" for Major Disasters.

PubMed

Ishii, Tadashi; Nakayama, Masaharu; Abe, Michiaki; Takayama, Shin; Kamei, Takashi; Abe, Yoshiko; Yamadera, Jun; Amito, Koichiro; Morino, Kazuma

2016-10-01

Introduction There were 5,385 deceased and 710 missing in the Ishinomaki medical zone following the Great East Japan Earthquake that occurred in Japan on March 11, 2011. The Ishinomaki Zone Joint Relief Team (IZJRT) was formed to unify the relief teams of all organizations joining in support of the Ishinomaki area. The IZJRT expanded relief activity as they continued to manually collect and analyze assessments of essential information for maintaining health in all 328 shelters using a paper-type survey. However, the IZJRT spent an enormous amount of time and effort entering and analyzing these data because the work was vastly complex. Therefore, an assessment system must be developed that can tabulate shelter assessment data correctly and efficiently. The objective of this report was to describe the development and verification of a system to rapidly assess evacuation centers in preparation for the next major disaster. Report Based on experiences with the complex work during the disaster, software called the "Rapid Assessment System of Evacuation Center Condition featuring Gonryo and Miyagi" (RASECC-GM) was developed to enter, tabulate, and manage the shelter assessment data. Further, a verification test was conducted during a large-scale Self-Defense Force (SDF) training exercise to confirm its feasibility, usability, and accuracy. The RASECC-GM comprises three screens: (1) the "Data Entry screen," allowing for quick entry on tablet devices of 19 assessment items, including shelter administrator, living and sanitary conditions, and a tally of the injured and sick; (2) the "Relief Team/Shelter Management screen," for registering information on relief teams and shelters; and (3) the "Data Tabulation screen," which allows tabulation of the data entered for each shelter, as well as viewing and sorting from a disaster headquarters' computer. During the verification test, data of mock shelters entered online were tabulated quickly and accurately on a mock disaster headquarters' computer. Likewise, data entered offline also were tabulated quickly on the mock disaster headquarters' computer when the tablet device was moved into an online environment. The RASECC-GM, a system for rapidly assessing the condition of evacuation centers, was developed. Tests verify that users of the system would be able to easily, quickly, and accurately assess vast quantities of data from multiple shelters in a major disaster and immediately manage the inputted data at the disaster headquarters. Ishii T , Nakayama M , Abe M , Takayama S , Kamei T , Abe Y , Yamadera J , Amito K , Morino K . Development and verification of a mobile shelter assessment system "Rapid Assessment System of Evacuation Center Condition featuring Gonryo and Miyagi (RASECC-GM)" for major disasters. Prehosp Disaster Med. 2016;31(5):539-546.

Tabulated Combustion Model Development For Non-Premixed Flames

NASA Astrophysics Data System (ADS)

Kundu, Prithwish

Turbulent non-premixed flames play a very important role in the field of engineering ranging from power generation to propulsion. The coupling of fluid mechanics and complicated combustion chemistry of fuels pose a challenge for the numerical modeling of these type of problems. Combustion modeling in Computational Fluid Dynamics (CFD) is one of the most important tools used for predictive modeling of complex systems and to understand the basic fundamentals of combustion. Traditional combustion models solve a transport equation of each species with a source term. In order to resolve the complex chemistry accurately it is important to include a large number of species. However, the computational cost is generally proportional to the cube of number of species. The presence of a large number of species in a flame makes the use of CFD computationally expensive and beyond reach for some applications or inaccurate when solved with simplified chemistry. For highly turbulent flows, it also becomes important to incorporate the effects of turbulence chemistry interaction (TCI). The aim of this work is to develop high fidelity combustion models based on the flamelet concept and to significantly advance the existing capabilities. A thorough investigation of existing models (Finite-rate chemistry and Representative Interactive Flamelet (RIF)) and comparative study of combustion models was done initially on a constant volume combustion chamber with diesel fuel injection. The CFD modeling was validated with experimental results and was also successfully applied to a single cylinder diesel engine. The effect of number of flamelets on the RIF model and flamelet initialization strategies were studied. The RIF model with multiple flamelets is computationally expensive and a model was proposed on the frame work of RIF. The new model was based on tabulated chemistry and incorporated TCI effects. A multidimensional tabulated chemistry database generation code was developed based on the 1D diffusion flame solver. The proposed model did not use progress variables like the traditional chemistry tabulation methods. The resulting model demonstrated an order of magnitude computational speed up over the RIF model. The results were validated across a wide range of operating conditions for diesel injections and the results were in close agreement to those of the experimental data. History of scalar dissipation rates plays a very important role in non premixed flames. However, tabulated methods have not been able to incorporate this physics in their models. A comparative approach is developed that can quantify these effects and find correlations with flow variables. A new model is proposed to include these effects in tabulated combustion models. The model is initially validated for 1D counterflow diffusion flame problems at engine conditions. The model is further implemented and validated in a 3D RANS code across a range of operating conditions for spray flames.

Recurrent Acute Pancreatitis: International State-of-the-Science Conference With Recommendations.

PubMed

Guda, Nalini M; Muddana, Venkata; Whitcomb, David C; Levy, Philippe; Garg, Pramod; Cote, Gregory; Uc, Aliye; Varadarajulu, Shyam; Vege, Santhi S; Chari, Suresh T; Forsmark, Chris E; Yadav, Dhiraj; Reddy, D Nageshwar; Tenner, Scott; Johnson, Colin D; Akisik, Fatih; Saluja, Ashok K; Lerch, Markus M; Mallery, J Shawn; Freeman, Martin L

2018-07-01

Recurrent acute pancreatitis (RAP) is a clinically significant problem globally. The etiology remains unclear in approximately 10% to 15% of patients despite a thorough workup. Data on natural history and efficacy of treatments are limited. We aimed to establish criteria for diagnosis, evaluate the causative factors, and arrive at a consensus on the appropriate workup and management of patients with RAP. The organizing committee was formed, and a set of questions was developed based on the current evidence, controversies, and topics that needed further research. After a vetting process, these topics were assigned to a group of experts from around the world with special interest in RAP. Data were presented as part of a workshop on RAP organized as a part of the annual meeting of the America Pancreatic Association. Pretest and Posttest questions were administered, and the responses were tabulated by the current Grades of Recommendation Assessment, Development and Evaluation system. The consensus guidelines were established in the format of a diagnostic algorithm. Several deficiencies were identified with respect to data on etiology, treatment efficacies, and areas that need immediate research.

A pertinent approach to solve nonlinear fuzzy integro-differential equations.

PubMed

Narayanamoorthy, S; Sathiyapriya, S P

2016-01-01

Fuzzy integro-differential equations is one of the important parts of fuzzy analysis theory that holds theoretical as well as applicable values in analytical dynamics and so an appropriate computational algorithm to solve them is in essence. In this article, we use parametric forms of fuzzy numbers and suggest an applicable approach for solving nonlinear fuzzy integro-differential equations using homotopy perturbation method. A clear and detailed description of the proposed method is provided. Our main objective is to illustrate that the construction of appropriate convex homotopy in a proper way leads to highly accurate solutions with less computational work. The efficiency of the approximation technique is expressed via stability and convergence analysis so as to guarantee the efficiency and performance of the methodology. Numerical examples are demonstrated to verify the convergence and it reveals the validity of the presented numerical technique. Numerical results are tabulated and examined by comparing the obtained approximate solutions with the known exact solutions. Graphical representations of the exact and acquired approximate fuzzy solutions clarify the accuracy of the approach.

A standard-driven approach for electronic submission to pharmaceutical regulatory authorities.

PubMed

Lin, Ching-Heng; Chou, Hsin-I; Yang, Ueng-Cheng

2018-03-01

Using standards is not only useful for data interchange during the process of a clinical trial, but also useful for analyzing data in a review process. Any step, which speeds up approval of new drugs, may benefit patients. As a result, adopting standards for regulatory submission becomes mandatory in some countries. However, preparing standard-compliant documents, such as annotated case report form (aCRF), needs a great deal of knowledge and experience. The process is complex and labor-intensive. Therefore, there is a need to use information technology to facilitate this process. Instead of standardizing data after the completion of a clinical trial, this study proposed a standard-driven approach. This approach was achieved by implementing a computer-assisted "standard-driven pipeline (SDP)" in an existing clinical data management system. SDP used CDISC standards to drive all processes of a clinical trial, such as the design, data acquisition, tabulation, etc. RESULTS: A completed phase I/II trial was used to prove the concept and to evaluate the effects of this approach. By using the CDISC-compliant question library, aCRFs were generated automatically when the eCRFs were completed. For comparison purpose, the data collection process was simulated and the collected data was transformed by the SDP. This new approach reduced the missing data fields from sixty-two to eight and the controlled term mismatch field reduced from eight to zero during data tabulation. This standard-driven approach accelerated CRF annotation and assured data tabulation integrity. The benefits of this approach include an improvement in the use of standards during the clinical trial and a reduction in missing and unexpected data during tabulation. The standard-driven approach is an advanced design idea that can be used for future clinical information system development. Copyright © 2018 Elsevier Inc. All rights reserved.

Flood of June 7-9, 2008, in Central and Southern Indiana

USGS Publications Warehouse

Morlock, Scott E.; Menke, Chad D.; Arvin, Donald V.; Kim, Moon H.

2008-01-01

On June 6-7, 2008, heavy rainfall of 2 to more than 10 inches fell upon saturated soils and added to already high streamflows from a wetter than normal spring in central and southern Indiana. The heavy rainfall resulted in severe flooding on many streams within the White River Basin during June 7-9, causing three deaths, evacuation of thousands of residents, and hundreds of millions of dollars of damage to residences, businesses, infrastructure, and agricultural lands. In all, 39 Indiana counties were declared Federal disaster areas. U.S. Geological Survey (USGS) streamgages at nine locations recorded new record peak streamflows for the respective periods of record as a result of the heavy rainfall. Recurrence intervals of flood-peak streamflows were estimated to be greater than 100 years at five streamgages and 50-100 years at two streamgages. Peak-gage-height data, peak-streamflow data, and recurrence intervals are tabulated for 19 USGS streamgages in central and southern Indiana. Peak-streamflow estimates are tabulated for four ungaged locations, and estimated recurrence intervals are tabulated for three ungaged locations. The estimated recurrence interval for an ungaged location on Haw Creek in Columbus was greater than 100 years and for an ungaged location on Hurricane Creek in Franklin was 50-100 years. Because flooding was particularly severe in the communities of Columbus, Edinburgh, Franklin, Paragon, Seymour, Spencer, Martinsville, Newberry, and Worthington, high-water-mark data collected after the flood were tabulated for those communities. Flood peak inundation maps and water-surface profiles for selected streams were made in a geographic information system by combining the high-water-mark data with the highest-resolution digital elevation model data available.

Implementation of a Tabulated Failure Model Into a Generalized Composite Material Model Suitable for Use in Impact Problems

NASA Technical Reports Server (NTRS)

Goldberg, Robert K.; Carney, Kelly S.; Dubois, Paul; Hoffarth, Canio; Khaled, Bilal; Shyamsunder, Loukham; Rajan, Subramaniam; Blankenhorn, Gunther

2017-01-01

The need for accurate material models to simulate the deformation, damage and failure of polymer matrix composites under impact conditions is becoming critical as these materials are gaining increased use in the aerospace and automotive communities. The aerospace community has identified several key capabilities which are currently lacking in the available material models in commercial transient dynamic finite element codes. To attempt to improve the predictive capability of composite impact simulations, a next generation material model is being developed for incorporation within the commercial transient dynamic finite element code LS-DYNA. The material model, which incorporates plasticity, damage and failure, utilizes experimentally based tabulated input to define the evolution of plasticity and damage and the initiation of failure as opposed to specifying discrete input parameters such as modulus and strength. The plasticity portion of the orthotropic, three-dimensional, macroscopic composite constitutive model is based on an extension of the Tsai-Wu composite failure model into a generalized yield function with a non-associative flow rule. For the damage model, a strain equivalent formulation is used to allow for the uncoupling of the deformation and damage analyses. For the failure model, a tabulated approach is utilized in which a stress or strain based invariant is defined as a function of the location of the current stress state in stress space to define the initiation of failure. Failure surfaces can be defined with any arbitrary shape, unlike traditional failure models where the mathematical functions used to define the failure surface impose a specific shape on the failure surface. In the current paper, the complete development of the failure model is described and the generation of a tabulated failure surface for a representative composite material is discussed.

Measurements of mass attenuation coefficients and determination of photoionization cross sections at energies across the Li (i=1-3) edges of 66Dy

NASA Astrophysics Data System (ADS)

Kaur, Rajnish; Kumar, Anil; Osan, Janos; Czyzycki, M.; Karydas, A. G.; Puri, Sanjiv

2017-07-01

The absolute values of the mass attenuation coefficients have been measured at sixty two photon energies across the Li (i=1-3) sub-shell absorption edges of 66Dy covering the region 7.6-14.0 keV in order to investigate the influence of near-edge processes on the attenuation coefficients. The present measured attenuation coefficients are found to be higher by up to 10% than the theoretical values evaluated from the computer code XCOM (Berger et al., 2010) and the self-consistent Dirac-Hartree-Slater (DHS) model based values tabulated by Chantler (1995) over the energy region 7.6-14.0 keV, except at energies in vicinity (few eV) of the Li (i=1-3) sub-shell absorption edge energies where the measured values are significantly higher (up to 37%) than both the sets of theoretical values. Further, the Li (i=1-3) sub-shell photoionization cross sections, (σLiP)exp, deduced from the present measured mass attenuation coefficients are compared with the non-relativistic Hartree-Fock-Slater (HFS) model based values tabulated by Scofield (1973) and those evaluated from the theoretical total photoionization attenuation coefficients tabulated by Chantler (1995). The deduced (σLiP)exp(i=1-3) values are found to be in better agreement with those evaluated from the tabulations given by Chantler (1995) than the values given by Scofield (1973) over the energy region 7.8 - 14.0 keV included in this study. However, at photon energies up to few eV above the Li edges, the deduced (σLiP)exp(i=1-3) values are found to be significantly higher (up to 32%) than both the sets of theoretical values.

Thermodynamic data for fifty reference elements

NASA Technical Reports Server (NTRS)

Mcbride, Bonnie J.; Gordon, Sanford; Reno, Martin A.

1993-01-01

This report is a compilation of thermodynamic functions of 50 elements in their standard reference state. The functions are C(sub p)(sup 0), (H(sup 0)(T) - H(sup 0)(0)), S(sup 0)(T), and -(G(sup 0)(T) - H(sup 0)(O)) for the elements Ag, Al, Ar, B, Ba, Be, Br2, C, Ca, Cd, Cl2, Co, Cr, Cs, Cu, F2, Fe, Ge, H2, He, Hg, I2, K, Kr, Li, Mg, Mn, Mo, N2, Na, Nb, Ne, Ni, O2, P, Pb, Rb, S, Si, Sn, Sr, Ta, Th, Ti, U, V, W, Xe, Zn, and Zr. Deuterium D2 and electron gas e(sup -) are also included. The data are tabulated as functions of temperature as well as given in the form of least-squares coefficients for two functional forms for C(sub p)(sup 0) with integration constants for enthalpy and entropy. One functional form for C(sub p)(sup 0) is a fourth-order polynomial and the other has two additional terms, one with T(exp -1) and the other with T(exp -2). The gases Ar, D2, e(sup -), H2, He, Kr, N2, Ne, O2, and Xe are tabulated for temperatures from 100 to 20,000 K. The remaining gases Cl2 and F2 are tabulated from 100 to 6000 K and 1000 to 6000 K. The second functional form for C(sub p)(sup 0) has an additional interval from 6000 to 20,000 K for the gases tabulated to 20,000 K. The fits are constrained so that the match at the common temperature endpoints. The temperature ranges for the condensed species vary with range of the data, phase changes, and shapes of the C(sub p)(sup 0) curves.

Intra Frame Coding In Advanced Video Coding Standard (H.264) to Obtain Consistent PSNR and Reduce Bit Rate for Diagonal Down Left Mode Using Gaussian Pulse

NASA Astrophysics Data System (ADS)

Manjanaik, N.; Parameshachari, B. D.; Hanumanthappa, S. N.; Banu, Reshma

2017-08-01

Intra prediction process of H.264 video coding standard used to code first frame i.e. Intra frame of video to obtain good coding efficiency compare to previous video coding standard series. More benefit of intra frame coding is to reduce spatial pixel redundancy with in current frame, reduces computational complexity and provides better rate distortion performance. To code Intra frame it use existing process Rate Distortion Optimization (RDO) method. This method increases computational complexity, increases in bit rate and reduces picture quality so it is difficult to implement in real time applications, so the many researcher has been developed fast mode decision algorithm for coding of intra frame. The previous work carried on Intra frame coding in H.264 standard using fast decision mode intra prediction algorithm based on different techniques was achieved increased in bit rate, degradation of picture quality(PSNR) for different quantization parameters. Many previous approaches of fast mode decision algorithms on intra frame coding achieved only reduction of computational complexity or it save encoding time and limitation was increase in bit rate with loss of quality of picture. In order to avoid increase in bit rate and loss of picture quality a better approach was developed. In this paper developed a better approach i.e. Gaussian pulse for Intra frame coding using diagonal down left intra prediction mode to achieve higher coding efficiency in terms of PSNR and bitrate. In proposed method Gaussian pulse is multiplied with each 4x4 frequency domain coefficients of 4x4 sub macro block of macro block of current frame before quantization process. Multiplication of Gaussian pulse for each 4x4 integer transformed coefficients at macro block levels scales the information of the coefficients in a reversible manner. The resulting signal would turn abstract. Frequency samples are abstract in a known and controllable manner without intermixing of coefficients, it avoids picture getting bad hit for higher values of quantization parameters. The proposed work was implemented using MATLAB and JM 18.6 reference software. The proposed work measure the performance parameters PSNR, bit rate and compression of intra frame of yuv video sequences in QCIF resolution under different values of quantization parameter with Gaussian value for diagonal down left intra prediction mode. The simulation results of proposed algorithm are tabulated and compared with previous algorithm i.e. Tian et al method. The proposed algorithm achieved reduced in bit rate averagely 30.98% and maintain consistent picture quality for QCIF sequences compared to previous algorithm i.e. Tian et al method.

Virtual Collaborative Environments for System of Systems Engineering and Applications for ISAT

NASA Technical Reports Server (NTRS)

Dryer, David A.

2002-01-01

This paper describes an system of systems or metasystems approach and models developed to help prepare engineering organizations for distributed engineering environments. These changes in engineering enterprises include competition in increasingly global environments; new partnering opportunities caused by advances in information and communication technologies, and virtual collaboration issues associated with dispersed teams. To help address challenges and needs in this environment, a framework is proposed that can be customized and adapted for NASA to assist in improved engineering activities conducted in distributed, enhanced engineering environments. The approach is designed to prepare engineers for such distributed collaborative environments by learning and applying e-engineering methods and tools to a real-world engineering development scenario. The approach consists of two phases: an e-engineering basics phase and e-engineering application phase. The e-engineering basics phase addresses skills required for e-engineering. The e-engineering application phase applies these skills in a distributed collaborative environment to system development projects.

Current Treatment Strategies for Intracranial Aneurysms: An Overview

PubMed Central

Lin, Hao; Summers, Richard; Yang, Mingmin; Cousins, Brian G.

2017-01-01

Intracranial aneurysm is a leading cause of stroke. Its treatment has evolved over the past 2 decades. This review summarizes the treatment strategies for intracranial aneurysms from 3 different perspectives: open surgery approach, transluminal treatment approach, and new technologies being used or trialed. We introduce most of the available treatment techniques in detail, including contralateral clipping, wrapping and clipping, double catheters assisting coiling and waffle-cone technique, and so on. Data from major trials such as Analysis of Treatment by Endovascular approach of Non-ruptured Aneurysms (ATENA), Internal Subarachnoid Trial (ISAT), Clinical and Anatomical Results in the Treatment of Ruptured Intracranial Aneurysms (CLARITY), and Barrow Ruptured Aneurysm Trial (BRAT) as well as information from other clinical reports and local experience are reviewed to suggest a clinical pathway for treating different types of intracranial aneurysms. It will be a valuable supplement to the current existing guidelines. We hope it could help assisting real-time decision-making in clinical practices and also encourage advancements in managing the disease. PMID:28355880

Summary of Skylab S-193 altimeter altitude results. [orbit calculation and studies of the ocean bottom

NASA Technical Reports Server (NTRS)

Mcgoogan, J. T.; Leitao, C. D.; Wells, W. T.

1975-01-01

The SKYLAB S-193 altimeter altitude results are presented in a concise format for further use and analysis by the scientific community. The altimeter mission and instrumentation is described along with the altimeter processing techniques and values of parameters used for processing. The determination of reference orbits is discussed, and the tracking systems utilized are tabulated. Techniques for determining satellite pointing are presented and a tabulation of pointing for each data mission included. The geographical location, the ocean bottom topography, the altimeter-determined ocean surface topography, and the altimeter automatic gain control history is presented. Some typical applications of this data are suggested.

Energy data report: Solar collector manufacturing activity, July - December 1980

NASA Astrophysics Data System (ADS)

1981-03-01

Statistics on solar collector manufacturing activity for both solar thermal collectors and photovoltaic modules through 1980 are presented. Summary data are given for the number of manufacturers and collector area produced each year from 1974 through 1980; data for collector type are included, i.e., low temperature or medium temperature and special collectors. Producer shipments are tabulated according to location of company headquarters, producer size, and collector types. headquarters The number of companies engaged in activities related to solar collector manufacturing for 1978 through 1980 are listed; and the number of manufacturers and market sector are tabulated for photovoltaic modules manufacturing activities.

Average latitudinal variation in ultraviolet radiation at the earth's surface. [biological sensitivity and dosage

NASA Technical Reports Server (NTRS)

Johnson, F. S.; Mo, T.; Green, A. E. S.

1976-01-01

Tabulated values are presented for ultraviolet radiation at the earth's surface as a function of wavelength, latitude, and season, for clear sky and seasonally and latitudinally averaged ozone amounts. These tabulations can be combined with any biological sensitivity function in order to obtain the seasonal and latitudinal variation of the corresponding effective doses. The integrated dosages, based on the erythemal sensitivity curve and on the Robertson-Berger sunburn-meter sensitivity curve, have also been calculated, and these are found to vary with latitude and season in very nearly the same way as 307 and 314 nm radiation, respectively.

Study of activation of metal samples from LDEF-1 and Spacelab-2

NASA Technical Reports Server (NTRS)

Laird, C. E.

1991-01-01

The activation of metal samples and other material orbited onboard the Long Duration Exposure Facility (LDEF) and Spacelab-2 were studied. Measurements of the radioactivities of spacecraft materials were made, and corrections for self-absorption and efficiency were calculated. Activation cross sections for specific metal samples were updated while cross sections for other materials were tabulated from the scientific literature. Activation cross sections for 200 MeV neutrons were experimentally determined. Linear absorption coefficients, half lives, branching ratios and other pertinent technical data needed for LDEF sample analyses were tabulated. The status of the sample counting at low background facilities at national laboratories is reported.

Zernike Basis to Cartesian Transformations

NASA Astrophysics Data System (ADS)

Mathar, R. J.

2009-12-01

The radial polynomials of the 2D (circular) and 3D (spherical) Zernike functions are tabulated as powers of the radial distance. The reciprocal tabulation of powers of the radial distance in series of radial polynomials is also given, based on projections that take advantage of the orthogonality of the polynomials over the unit interval. They play a role in the expansion of products of the polynomials into sums, which is demonstrated by some examples. Multiplication of the polynomials by the angular bases (azimuth, polar angle) defines the Zernike functions, for which we derive transformations to and from the Cartesian coordinate system centered at the middle of the circle or sphere.

X-ray natural widths, level widths and Coster-Kronig transition probabilities

NASA Astrophysics Data System (ADS)

Papp, T.; Campbell, J. L.; Varga, D.

1997-01-01

A critical review is given for the K-N7 atomic level widths. The experimental level widths were collected from x-ray photoelectron spectroscopy (XPS), x-ray emission spectroscopy (XES), x-ray spectra fluoresced by synchrotron radiation, and photoelectrons from x-ray absorption (PAX). There are only limited atomic number ranges for a few atomic levels where data are available from more than one source. Generally the experimental level widths have large scatter compared to the reported error bars. The experimental data are compared with the recent tabulation of Perkins et al. and of Ohno et al. Ohno et al. performed a many body approach calculation for limited atomic number ranges and have obtained reasonable agreement with the experimental data. Perkins et al. presented a tabulation covering the K-Q1 shells of all atoms, based on extensions of the Scofield calculations for radiative rates and extensions of the Chen calculations for non-radiative rates. The experimental data are in disagreement with this tabulation, in excess of a factor of two in some cases. A short introduction to the experimental Coster-Kronig transition probabilities is presented. It is our opinion that the different experimental approaches result in systematically different experimental data.

Modelling alkali metal emissions in large-eddy simulation of a preheated pulverised-coal turbulent jet flame using tabulated chemistry

NASA Astrophysics Data System (ADS)

Wan, Kaidi; Xia, Jun; Vervisch, Luc; Liu, Yingzu; Wang, Zhihua; Cen, Kefa

2018-03-01

The numerical modelling of alkali metal reacting dynamics in turbulent pulverised-coal combustion is discussed using tabulated sodium chemistry in large eddy simulation (LES). A lookup table is constructed from a detailed sodium chemistry mechanism including five sodium species, i.e. Na, NaO, NaO2, NaOH and Na2O2H2, and 24 elementary reactions. This sodium chemistry table contains four coordinates, i.e. the equivalence ratio, the mass fraction of the sodium element, the gas-phase temperature, and a progress variable. The table is first validated against the detailed sodium chemistry mechanism by zero-dimensional simulations. Then, LES of a turbulent pulverised-coal jet flame is performed and major coal-flame parameters compared against experiments. The chemical percolation devolatilisation (CPD) model and the partially stirred reactor (PaSR) model are employed to predict coal pyrolysis and gas-phase combustion, respectively. The response of the five sodium species in the pulverised-coal jet flame is subsequently examined. Finally, a systematic global sensitivity analysis of the sodium lookup table is performed and the accuracy of the proposed tabulated sodium chemistry approach has been calibrated.

Content analysis of CMS Healthcare Innovation Awards from a physiatric perspective.

PubMed

Smith, Matthew J

2014-11-01

On June 15, 2012, the Centers for Medicare and Medicaid Services (CMS) announced the 107 recipients of the Healthcare Innovation Awards (HCIA). The 107 awardees received a total of $874,074,900 in funding, with a projected 3-year savings of $1,863,119,104. A word frequency calculator was used to perform a content analysis on the document that announced the projects receiving funding in the 2012 HCIA program. Results were tabulated and categorized to look for prevailing themes and trends. The words generated by the word frequency calculator were grouped into common roots and tabulated to better understand how CMS was rewarding value. Some of the most common words were "manage," "community," "coordinate," "team," "system" and "integrate." Additionally, the job positions that the projects propose to create were tabulated and grouped into categories. Physicians, including physiatrists, were not often mentioned, whereas nursing and nonclinical positions were frequently listed. This content analysis showed that the concepts emphasized in the HCIA projects parallel fundamental physiatric principles. The findings may help physiatrists understand how reform is unfolding, prepare for the evolving health care landscape, and recognize future opportunities. Copyright © 2014. Published by Elsevier Inc.

Characterization of Infrared Diode Laser Beams and Atmospheric CO Imaging Instrument

NASA Technical Reports Server (NTRS)

Miles, Jonathan J.

1999-01-01

During June-August 1997 Dr. Jonathan Miles participated in the ASEE-sponsored summer faculty research program at NASA Langley Research Center (LaRC). The Aerospace Electronic Systems Division (AESD), Sensor Systems Branch (SSB), at NASA LARC had proposed a new mission, GEOstationary TROpospheric Pollution SATellite (GEO TROPSAT), to address critical science questions of tropospheric chemistry. The troposphere is a complex system, comprising "point" and distributed sources of natural and anthropogenic origin; complicated transport processes, both lateral and vertical; and photochemistry driven by UV flux, temperature, atmospheric composition, and other variables. GEO TROPSAT would be implemented about a geostationary Earth orbital (GEO) position at the equator between 600 and 80" West longitude to observe the Americas and large portions of the oceans of either coast. This mission would advance our knowledge of the atmosphere by capturing the wide temporal and spatial variability of tropospheric phenomena which is undetectable from low Earth orbit. A pre-prototype imaging carbon monoxide (CO) imaging system operating within a narrow waveband about 4.7 [Lm was built, demonstrated, and evaluated. This system applies the gas-filter correlation radiometry (GFCR) technique and produces digitized images comprising 4096 pixels, each representing a single CO mixing ratio measurement inferred from radiometric data. Associated tasks accomplished included specification for the next-generation prototype system to operate in the 2.3-@tm waveband; characterization of a 64x64, InSb focal-plane-array (FPA) imager; design, fabrication, and assembly of a filter wheel; and software development. Laboratory evaluation of this system involved imaging of a test cell placed in the path of radiant flux emanating from a blackbody source used to simulate the radiant energy reflected by Earth in real application. The cell was evacuated for system balancing and then charged with measured quantities of CO to provide a means for system characterization. Two related research efforts were undertaken during the term of the study reported here - continued development of an atmospheric CO imaging instrument and characterization of diode-laser beams. Both efforts were successful and are described within the body of this report. A second objective was to provide a means for undergraduate ISAT majors to become involved with the research described, to be afforded the opportunity to learn the technologies associated with the work performed. Two ISAT students gained a comprehensive understanding and interest in missions supported by NASA through direct involvement in this project. Many more students were exposed to these technologies through demonstrations, laboratory tours, and explanations provided in lectures.

Cost-effectiveness analysis of endovascular versus neurosurgical treatment for ruptured intracranial aneurysms in the United States

PubMed Central

Maud, Alberto; Lakshminarayan, Kamakshi; Suri, M. Fareed K.; Vazquez, Gabriela; Lanzino, Giuseppe; Qureshi, Adnan I.

2009-01-01

Object The results of the International Subarachnoid Aneurysm Trial (ISAT) demonstrated lower rates of death and disability with endovascular treatment (coiling) than with open surgery (clipping) to secure the ruptured intracranial aneurysm. However, cost-effectiveness may not be favorable because of the greater need for follow-up cerebral angiograms and additional follow-up treatment with endovascular methods. In this study, the authors’ goal was to compare the cost-effectiveness of endovascular and neurosurgical treatments in patients with ruptured intracranial aneurysms who were eligible to undergo either type of treatment. Methods Clinical data (age, sex, frequency of retreatment, and rebleeding) and quality of life values were obtained from the ISAT. Total cost included those associated with disability, hospitalization, retreatment, and rebleeding. Cost estimates were derived from the Premier Perspective Comparative Database, data from long-term care in stroke patients, and relevant literature. Incremental cost-effectiveness ratios (ICERs) were estimated during a 1-year period. Parametric bootstrapping was used to determine the uncertainty of the estimates. Results The median estimated costs of endovascular and neurosurgical treatments (in US dollars) were $45,493 (95th percentile range $44,693–$46,365) and $41,769 (95th percentile range $41,094–$42,518), respectively. The overall quality-adjusted life years (QALY) in the endovascular group was 0.69, and for the neurosurgical group it was 0.64. The cost per QALY in the endovascular group was $65,424 (95th percentile range $64,178–$66,772), and in the neurosurgical group it was $64,824 (95th percentile range $63,679–$66,086). The median estimated ICER at 1 year for endovascular treatment versus neurosurgical treatment was $72,872 (95th percentile range $50,344–$98,335) per QALY gained. Given that most postprocedure angiograms and additional treatments occurred in the 1st year and the 1-year disability status is unlikely to change in the future, ICER for endovascular treatment will progressively decrease over time. Conclusions Using outcome and economic data obtained in the US at 1 year after the procedure, endovascular treatment is more costly but is associated with better outcomes than the neurosurgical alternative among patients with ruptured intracranial aneurysms who are eligible to undergo either procedure. With accrual of additional years with a better outcome status, the ICER for endovascular coiling would be expected to progressively decrease and eventually reverse. PMID:19199452

Evaluation of the National Throughput Benefits of the Civil Tilt Rotor

NASA Technical Reports Server (NTRS)

Johnson, Jesse; Stouffer, Virginia; Long, Dou; Gribko, Joana; Yackovetsky, Robert (Technical Monitor)

2001-01-01

The air transportation system is a key part of the U.S. and global economic infrastructure. In recent years, this system, by any measure of usage - operations, enplanements, or revenue passenger miles (RPMs) - has grown rapidly. The rapid growth in demand has not been matched; however, by commensurate increases in the ability of airports and the airspace system to handle the additional traffic. As a result, the air transportation system is approaching capacity and airlines will face excessive delays or significant constraints on service unless capacity is expanded. To expand capacity, the air traffic management system must be improved. To improve the air traffic management system, the National Aeronautics and Space Administration (NASA) Aerospace Technology Enterprise developed the strategic goal of tripling air traffic throughput over the next 10 years, in all weather conditions, while at least maintaining current safety standards. As the first step in meeting that goal, the NASA Intercenter Systems Analysis Team (ISAT) is evaluating the contribution of existing programs to meet that goal. A major part of the study is an examination of the ability of the National Airspace System (NAS) to meet the predicted growth in travel demand and the potential benefits of technology infusion to expand NAS capacity. We previously analyzed the effects of the addition of two technology elements - Terminal Area Productivity (TAP) and Advanced Air Transportation Technologies (AATT). The next program we must analyze is not specific to airspace or aircraft technology. The program incorporates a fundamentally different vehicle to improve throughput: the civil tilt rotor (CTR). The CTR has the unique operating characteristic of being able to take off and land like a rotorcraft (vertical take off and landing, or VTOL, capability) but cruises like a traditional fixed-wing aircraft. The CTR also can operate in a short take off and landing (STOL) mode; generally, with a greater payload capacity (i.e., more passengers) than when operating in the VTOL mode. CTR could expand access to major airports without interfering with fixed-wing aircraft operating on congested runways and it could add service to new markets without the infrastructure support needed for fixed-wing aircraft. During FY 1999, we preliminarily assessed the feasibility of operating CTRs at two major U.S. airports as part of the annual review of NASA aerospace goals by the ISAT. This current study expands the analysis and concepts of that study to the complete NAS to quantify the national throughput effects of the CTR.

The Impact of Low-Level Lead Toxicity on School Performance among Hispanic Subgroups in the Chicago Public Schools.

PubMed

Blackowicz, Michael J; Hryhorczuk, Daniel O; Rankin, Kristin M; Lewis, Dan A; Haider, Danish; Lanphear, Bruce P; Evens, Anne

2016-08-01

Environmental lead exposure detrimentally affects children's educational performance, even at very low blood lead levels (BLLs). Among children in Chicago Public Schools (CPS), the severity of the effects of BLL on reading and math vary by racial subgroup (White vs. Hispanic vs. non-Hispanic Black). We investigated the impact of BLL on standardized test performance by Hispanic subgroup (Mexican, Puerto Rican, and Other Hispanic). We examined 12,319 Hispanic children born in Chicago between 1994 and 1998 who were tested for BLL between birth and 2006 and enrolled in the 3rd grade at a CPS school between 2003 and 2006. We linked the Chicago birth registry, the Chicago Blood Lead Registry, and 3rd grade Illinois Standard Achievement Test (ISAT) scores to examine associations between BLL and school performance. Primary analyses were restricted to children with BLL below 10 µg/dL (0.483 µmol/L). BLLs below 10 µg/dL (0.483 µmol/L) were inversely associated with reading and math scores in all Hispanic subgroups. Adjusted Relative Risks (RRadj) and 95% confidence intervals (CI) for reading and math failure were 1.34 (95% CI = 1.25, 1.63) and 1.53 (95% CI = 1.32, 1.78), respectively, per each additional 5 µg/dL of lead exposure for Hispanic children; RRadj did not differ across subgroups. We estimate that 7.0% (95% CI = 1.8, 11.9) of reading and 13.6% (95% CI = 7.7, 19.2) of math failure among Hispanic children can be attributed to exposure to BLLs of 5-9 µg/dL (0.242 to 0.435 µmol/L) vs. 0-4 µg/dL (0-0.193 µmol/L). The RRadj of math failure for each 5 µg/dL (0.242 µmol/L) increase in BLL was notably (p = 0.074) stronger among black Puerto Rican children (RRadj = 5.14; 95% CI = 1.65-15.94) compared to white Puerto Rican children (RRadj = 1.50; 95% CI = 1.12-2.02). Early childhood lead exposure is associated with poorer achievement on standardized reading and math tests in the 3rd grade for Mexican, Puerto Rican, and Other Hispanic children enrolled in Chicago Public Schools. While we did not see interactions between BLL and ISAT performance by Hispanic subgroup, the stronger association between BLL and math failure for Black Puerto Rican children is intriguing and warrants further study.

Sopite Syndrome in Operational Flight Training.

DTIC Science & Technology

1998-09-01

1 B. PURPOSE ...................................................................... 3 C ...7 C . SOPITE SYNDROME ...................................................... 10 D. TREATMENT ASSESSMENT...25 C . DATA TABULATION ..................................................... 26 vii IV. RESULTS

A table of semiempirical gf values. Part 2. Wavelengths: 272. 3395 nm to 599. 3892 nm

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurucz, R.L.; Peytremann, E.

1975-02-14

The gf values for 265,587 atomic lines selectedfrom the line data used to calculate line blanketed model atmospheres are tabulated. These data are especially useful for line identification and spectral synthesis in solar and stellar spectra. The gf values are calculated semiempirically by using scaled Thomas--Fermi--Dirac radial wave functions and eigenvectors found through least-squares fits to observed energy levels. Included in the calculation are the first five or six stages of ionization for sequences up through nickel. Published gf values are included for elements heavier than nickel. The tabulation is restricted to lines with wavelengths less than 10 micrometers. (auth)

Tabulation of data from tests of an NPL 9510 airfoil in the Langley 0.3-meter transonic cryogenic tunnel

NASA Technical Reports Server (NTRS)

Jenkins, R. V.

1983-01-01

The tabulated data from tests of a six inch chord NPL 9510 airfoil in the Langley 0.3-Meter Transonic Cryogenic Tunnel. The tests were performed over the following range of conditions: Mach numbers of 0.35 to 0.82, total temperature of 94 K to 300 K, total pressure of 1.20 to 5.81 atm, Reynolds number based on chord of 1.34 x 10 to the 6th to 48.23 x 10 to the 6th, and angle of attack of 0 deg to 6 deg. The NPL 9510 airfoil was observed to have decreasing drag coefficient up to the highest test Reynolds number.

Tabulated Pressure Coefficient Data from a Tail Loads Investigation on a 1/15-Scale Model of the Goodyear XZP5K Airship

NASA Technical Reports Server (NTRS)

Cannon, Michael D.

1956-01-01

This paper contains tail and hull loads data obtained in an investigation of a l/15-scale model of the Goodyear XZP5K airship. Data are presented in the form of tabulated pressure coefficients over a pitch and yaw range of +/-20 deg and 0 deg to 30 deg respectively, with various rudder and elevator deflections. Two tail configurations of different plan forms were tested on the model. The investigation was conducted in the Langley full-scale tunnel at a Reynolds number of approximately 16.5 x 10(exp 6) based on hull length, which corresponds to a Mach number of about 0.12.

Tabulation and summary of thermodynamic effects data for developed cavitation on ogive-nosed bodies

NASA Technical Reports Server (NTRS)

Holl, J. W.; Billet, M. L.; Weir, D. S.

1978-01-01

Thermodynamic effects data for developed cavitation on zero and quarter caliber ogives in Freon 113 and water are tabulated and summarized. These data include temperature depression (delta T), flow coefficient (C sub Q), and various geometrical characteristics of the cavity. For the delta T tests, the free-stream temperature varied from 35 C to 95 C in Freon 113 and from 60 C to 125 C in water for a velocity range of 19.5 m/sec to 36.6 m/sec. Two correlations of the delta T data by the entrainment method are presented. These correlations involve different combinations of the Nusselt, Reynolds, Froude, Weber, and Peclet numbers and dimensionless cavity length.

An image based information system - Architecture for correlating satellite and topological data bases

NASA Technical Reports Server (NTRS)

Bryant, N. A.; Zobrist, A. L.

1978-01-01

The paper describes the development of an image based information system and its use to process a Landsat thematic map showing land use or land cover in conjunction with a census tract polygon file to produce a tabulation of land use acreages per census tract. The system permits the efficient cross-tabulation of two or more geo-coded data sets, thereby setting the stage for the practical implementation of models of diffusion processes or cellular transformation. Characteristics of geographic information systems are considered, and functional requirements, such as data management, geocoding, image data management, and data analysis are discussed. The system is described, and the potentialities of its use are examined.

Atomic and ionic spectrum lines below 2000A: hydrogen through argon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, R.L.

1982-10-01

A critical tabulation of observed spectral lines below 2000 angstroms has been prepared from the published literature up to July 1978. It is intended principally as an aid to those physicists and astronomers who deal with the spectra of highly stripped atoms. This report includes the first 18 elements, from hydrogen (including deuterium) through argon. The tabulation is divided into two main sections: the spectrum lines by spectrum, and a finding list. The entries for each element give the ionization species, ground state term, and ionization potential, as well as the best values of vacuum wavelength, intensity, and classification. Amore » list of the pertinent references is appended at the end.« less

Anthropometric survey of the astronaut applicants and astronauts from 1985 to 1991

NASA Technical Reports Server (NTRS)

Rajulu, Sudhakar L.; Klute, Glenn K.

1993-01-01

The Anthropometry and Biomechanics Laboratory at the Johnson Space Center has been collecting anthropometric data from astronaut applicants since 1977. These anthropometric measurements had been taken from 473 applicants. Based on the position they applied for, these applicants were classified as either mission specialists, payload specialists, pilots, or observers. The main objective was to document the variations among these applicants and tabulate the percentile data for each anthropometric dimension. The percentile and the descriptive statistics data were tabulated and graphed for the whole astronaut candidate population; for the male and female groups; for each subject classification such as pilot, mission specialist, and payload specialist; and finally, for those who were selected as astronauts.

Aerodynamic Loads at Mach Numbers from 0.70 to 2.22 on an Airplane Model Having a Wing and Canard of Triangular Plan Form and Either Single or Twin Vertical Tails Supplement I-Tabulated Data for the Model with Single Vertical Tails. Supplement 1; Tabulated Data for the Model with Single Vertical Tail

NASA Technical Reports Server (NTRS)

Peterson, Victor L.; Menees, Gene P.

1961-01-01

Tabulated results of a wind-tunnel investigation of the aerodynamic loads on a canard airplane model with a single vertical tail are presented for Mach numbers from 0.70 to 2.22. The Reynolds number for the measurements was 2.9 x 10(exp 6) based on the wing mean aerodynamic chord. The results include local static pressure coefficients measured on the wing, body, and vertical tail for angles of attack from -4 deg to + 16 deg, angles of sideslip of 0 deg and 5.3 deg, vertical-tail settings of 0 deg and 5 deg, and nominal canard deflections of 0 deg and 10 deg. Also included are section force and moment coefficients obtained from integrations of the local pressures and model-component force and moment coefficients obtained from integrations of the section coefficients. Geometric details of the model and the locations of the pressure orifices are shown. An index to the data contained herein is presented and definitions of nomenclature are given.

VizieR Online Data Catalog: Historical and HST Astrometry of Sirius A,B (Bond+, 2017)

NASA Astrophysics Data System (ADS)

Bond, H. E.; Schaefer, G. H.; Gilliland, R. L.; Holberg, J. B.; Mason, B. D.; Lindenblad, I. W.; Seitz-McLeese, M.; Arnett, W. D.; Demarque, P.; Spada, F.; Young, P. A.; Barstow, M. A.; Burleigh, M. R.; Gudehus, D.

2017-05-01

We have assembled a compilation of published historical measurements of the position angle (PA) and the angular separation of Sirius B relative to Sirius A. Our tabulation is based on a critical review of measures contained in the Washington Double Star Catalog maintained at the USNO and from our additional literature searches. Notes included in the tabulation give extensive commentary on the historical observations. Many early publications provided measures averaged over multiple nights or even an entire observing season for the purpose of reducing computational labor in subsequent analyses. With modern computers, there is no need for such averaging, so we opted to present the individual measures whenever available. However, if an observer reported more than one measurement on a given night, we did compute the mean position for that night. If the original publication only reported a mean across several nights, we tabulated that mean as reported. The visual micrometer observations did not always include a contemporaneous measurement of both the PA and separation. These omissions are listed as -99.0 in the table. The measurement uncertainties were assigned through our orbital fitting method described in the paper. Measurements that were rejected from the orbital solution are identified in the Notes column and are listed with uncertainties of 0. (3 data files).

37 CFR 104.1 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., maps, graphs, pamphlets, notes, charts, tabulations, analyses, statistical or informational... Office. Official business means the authorized business of the Office. General Counsel means the General...

Census data for studying elderly populations.

PubMed

Martin, L G

1987-06-01

As fertility and population growth rates decline in the Asian and Pacific region, populations of the elderly (aged 65 and older) are growing rapidly. In 1980, the number of elderly was roughly equally divided between more developed and less developed countries; in the future, the majority of the elderly will live in less developed countries, especially in Asia. Most countries will double their elderly populations between 1980 and 2000. Censuses can provide information for planning ways to accommodate the growing numbers of elderly. Most censuses in the Asian and Pacific region provide population counts to fairly high ages. The elderly should not be stereotyped by assuming that they are all alike physically, emotionally, socially, and politically. Except for Indonesia and the Republic of Korea, all the censuses lower the last age for which provide detail in their published tabulations of marital status data compared to tabulations of population counts. Policy makers are more concerned with the extent to which the generations live together. Censuses potentially are a rich source of data on living arrangements, but, except for Japan, that potential is not being realized. Various types of information on the living arrangements of the elderly are contained in several censuses. An example is tabulations by 5-year groups to 85+ years of individuals by their relationship to the household head and by family type. It is important for the government to ascertain the extent to which some elderly may need some public assistance. Most of the censuses provide information on labor force participation to ages 60 or 65 and above. Censuses also provide information on income. More information will be needed on elderly in the future and much of it can be made available by increasing the amount of detail, by age, in published tabulations. Censuses can provide a regular, reliable flow of data and information that will form the foundation for designing programs for the expanding elderly population of Asia and the Pacific.

Thermodynamic Data for Fifty Reference Elements

NASA Technical Reports Server (NTRS)

McBride, Bonnie J.; Gordon, Sanford; Reno, Martin A.

2001-01-01

This report is a compilation of thermodynamic functions of 50 elements in their reference state. The functions are: C(sup 0, sub p), {H(T)-H(sup 0)(0)}, S(sup 0)(T), and - {G(sup 0)(T) - H(sup 0)(0)} for the elements Ag, Al, Ar, B, Ba, Be, Br2, C, Ca, Cd, Cl2, Co, Cr, Cs, Cu, F2, Fe, Ge, H2, He, Hg, I2, K, Kr, Li, Mg, Mn, Mo, N2, Na, Nb, Ne, Ni, O2, P, Pb, Rb, S, Si, Sn, Sr, Th, Th, Ti, U, V, W, Xe, Zn, and Zr. Deuterium D, and electron gas e(sup -) are also included. The data are tabulated as functions of temperature as well as given in the form of least-squares coefficients for two functional forms for C(sup 0, sub p) with integration constants for enthalpy and entropy. One functional form for C(sup 0, sub p) is a fourth-order polynomial and the other has two additional terms, one with T(sup -1) and the other with T(sup -2). The gases Ar, D2, e(sup -), H2, He, Kr, N2, Ne, O2, and Xe are tabulated for temperatures from 100 to 20 000 K. The remaining gases Cl2 and F2 are tabulated from 100 to 6000 K. The polynomial functional form for C(sup 0, sub p) for all these gases is split into two temperature intervals of 200 to 1000 K and 1000 to 6000 K. The second functional form for (sup 0, sub p) has an additional interval from 6000 to 20 000 K for the gases tabulated to 20 000 K. The fits are constrained so that the properties match at the common temperature endpoints. The temperature ranges for the condensed species vary with range of the data, phase changes, and shapes of the C(sup 0, sub p) curves.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pokhrel, D; Badkul, R; Jiang, H

Purpose: To compare dose distributions calculated using the iPlan XVMC algorithm and heterogeneities corrected/uncorrected Pencil Beam (PB-hete/PB-homo) algorithms for SBRT treatments of lung tumors. Methods: Ten patients with centrally located solitary lung tumors were treated using MC-based SBRT to 60Gy in 5 fractions for PTVV100%=95%. ITV was delineated on MIP-images based on 4D-CT scans. PTVs(ITV+5mm margins) ranged from 10.1–106.5cc(mean=48.6cc). MC-SBRT plans were generated with a combination of non-coplanar conformal arcs/beams using iPlan-XVMC-algorithm (BrainLABiPlan ver.4.1.2) for Novalis-TX consisting of HD-MLCs and 6MV-SRS(1000MU/min) mode, following RTOG 0813 dosimetric criteria. For comparison, PB-hete/PB-homo algorithms were used to re-calculate dose distributions using same beammore » configurations, MLCs/monitor units. Plans were evaluated with isocenter/maximal/mean doses to PTV. Normal lung doses were evaluated with V5/V10/V20 and mean-lung-dose(MLD), excluding PTV. Other OAR doses such as maximal spinal cord/2cc-esophagus/max bronchial tree (BT/maximal heart doses were tabulated. Results: Maximal/mean/isocenter doses to PTV calculated by PB-hete were uniformly larger than MC plans by a factors of 1.09/1.13/1.07, on average, whereas they were consistently lower by PB-homo by a factors of 0.9/0.84/0.9, respectively. The volume covered by 5Gy/10Gy/20Gy isodose-lines of the lung were comparable (average within±3%) when calculated by PB-hete compared to XVMC, but, consistently lower by PB-homo by a factors of 0.90/0.88/0.85, respectively. MLD was higher with PB-hete by 1.05, but, lower by PB-homo by 0.9, on average, compared to XVMC. XVMC max-cord/max-BT/max-heart and 2cc of esophagus doses were comparable to PB-hete; however, PB-homo underestimates by a factors of 0.82/0.89/0.88/0.86, on average, respectively. Conclusion: PB-hete significantly overestimates dose to PTV relative to XVMC -hence underdosing the target. MC is more complex and accurate with tissue-heterogeneities.The magnitude of variation significantly varies with ‘small-island-tumor’ surrounded by low-density lung tissues -PB algorithms lacks later electron scattering. Dose calculation with XVMC for lung SBRT is routinely performed in our clinic, its performance for head'neck/sinus cases will also be investigated.« less

Verification of unfold error estimates in the UFO code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fehl, D.L.; Biggs, F.

Spectral unfolding is an inverse mathematical operation which attempts to obtain spectral source information from a set of tabulated response functions and data measurements. Several unfold algorithms have appeared over the past 30 years; among them is the UFO (UnFold Operator) code. In addition to an unfolded spectrum, UFO also estimates the unfold uncertainty (error) induced by running the code in a Monte Carlo fashion with prescribed data distributions (Gaussian deviates). In the problem studied, data were simulated from an arbitrarily chosen blackbody spectrum (10 keV) and a set of overlapping response functions. The data were assumed to have anmore » imprecision of 5% (standard deviation). 100 random data sets were generated. The built-in estimate of unfold uncertainty agreed with the Monte Carlo estimate to within the statistical resolution of this relatively small sample size (95% confidence level). A possible 10% bias between the two methods was unresolved. The Monte Carlo technique is also useful in underdetemined problems, for which the error matrix method does not apply. UFO has been applied to the diagnosis of low energy x rays emitted by Z-Pinch and ion-beam driven hohlraums.« less

Validation of a vector version of the 6S radiative transfer code for atmospheric correction of satellite data. Part II. Homogeneous Lambertian and anisotropic surfaces.

PubMed

Kotchenova, Svetlana Y; Vermote, Eric F

2007-07-10

This is the second part of the validation effort of the recently developed vector version of the 6S (Second Simulation of a Satellite Signal in the Solar Spectrum) radiative transfer code (6SV1), primarily used for the calculation of look-up tables in the Moderate Resolution Imaging Spectroradiometer (MODIS) atmospheric correction algorithm. The 6SV1 code was tested against a Monte Carlo code and Coulson's tabulated values for molecular and aerosol atmospheres bounded by different Lambertian and anisotropic surfaces. The code was also tested in scalar mode against the scalar code SHARM to resolve the previous 6S accuracy issues in the case of an anisotropic surface. All test cases were characterized by good agreement between the 6SV1 and the other codes: The overall relative error did not exceed 0.8%. The study also showed that ignoring the effects of radiation polarization in the atmosphere led to large errors in the simulated top-of-atmosphere reflectances: The maximum observed error was approximately 7.2% for both Lambertian and anisotropic surfaces.

Validation of a vector version of the 6S radiative transfer code for atmospheric correction of satellite data. Part II. Homogeneous Lambertian and anisotropic surfaces

NASA Astrophysics Data System (ADS)

Kotchenova, Svetlana Y.; Vermote, Eric F.

2007-07-01

This is the second part of the validation effort of the recently developed vector version of the 6S (Second Simulation of a Satellite Signal in the Solar Spectrum) radiative transfer code (6SV1), primarily used for the calculation of look-up tables in the Moderate Resolution Imaging Spectroradiometer (MODIS) atmospheric correction algorithm. The 6SV1 code was tested against a Monte Carlo code and Coulson's tabulated values for molecular and aerosol atmospheres bounded by different Lambertian and anisotropic surfaces. The code was also tested in scalar mode against the scalar code SHARM to resolve the previous 6S accuracy issues in the case of an anisotropic surface. All test cases were characterized by good agreement between the 6SV1 and the other codes: The overall relative error did not exceed 0.8%. The study also showed that ignoring the effects of radiation polarization in the atmosphere led to large errors in the simulated top-of-atmosphere reflectances: The maximum observed error was approximately 7.2% for both Lambertian and anisotropic surfaces.

Proposal of a Clinical Decision Tree Algorithm Using Factors Associated with Severe Dengue Infection.

PubMed

Tamibmaniam, Jayashamani; Hussin, Narwani; Cheah, Wee Kooi; Ng, Kee Sing; Muninathan, Prema

2016-01-01

WHO's new classification in 2009: dengue with or without warning signs and severe dengue, has necessitated large numbers of admissions to hospitals of dengue patients which in turn has been imposing a huge economical and physical burden on many hospitals around the globe, particularly South East Asia and Malaysia where the disease has seen a rapid surge in numbers in recent years. Lack of a simple tool to differentiate mild from life threatening infection has led to unnecessary hospitalization of dengue patients. We conducted a single-centre, retrospective study involving serologically confirmed dengue fever patients, admitted in a single ward, in Hospital Kuala Lumpur, Malaysia. Data was collected for 4 months from February to May 2014. Socio demography, co-morbidity, days of illness before admission, symptoms, warning signs, vital signs and laboratory result were all recorded. Descriptive statistics was tabulated and simple and multiple logistic regression analysis was done to determine significant risk factors associated with severe dengue. 657 patients with confirmed dengue were analysed, of which 59 (9.0%) had severe dengue. Overall, the commonest warning sign were vomiting (36.1%) and abdominal pain (32.1%). Previous co-morbid, vomiting, diarrhoea, pleural effusion, low systolic blood pressure, high haematocrit, low albumin and high urea were found as significant risk factors for severe dengue using simple logistic regression. However the significant risk factors for severe dengue with multiple logistic regressions were only vomiting, pleural effusion, and low systolic blood pressure. Using those 3 risk factors, we plotted an algorithm for predicting severe dengue. When compared to the classification of severe dengue based on the WHO criteria, the decision tree algorithm had a sensitivity of 0.81, specificity of 0.54, positive predictive value of 0.16 and negative predictive of 0.96. The decision tree algorithm proposed in this study showed high sensitivity and NPV in predicting patients with severe dengue that may warrant admission. This tool upon further validation study can be used to help clinicians decide on further managing a patient upon first encounter. It also will have a substantial impact on health resources as low risk patients can be managed as outpatients hence reserving the scarce hospital beds and medical resources for other patients in need.

15 CFR 15.12 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... and diary entries, maps, graphs, pamphlets, notes, charts, tabulations, analyses, statistical or... involved in legal proceedings. (i) Official business means the authorized business of the Department. (j...

Tabulated Pressure Data for a Series of Controls on a 40 Deg Sweptback Wing at Mach Numbers of 1.61 and 2.01

NASA Technical Reports Server (NTRS)

Lord, D. R.

1957-01-01

An investigation has been made at Mach numbers of 1.61 and 2.01 and Reynolds numbers of 1.7 x l0(exp 6) and 3.6 x l0(exp 6) to determine the pressure distributions over a swept wing with a series of 14 control configurations. The wing had 40 deg of sweep of the quarter-chord line, an aspect ratio of 3.1, and a taper ratio of 0.4. Measurements were made at angles of attack from 0 deg to +/- 15 deg for control deflections from -60 deg to 60 deg. This report contains tabulated pressure data for the complete range of test conditions.

Climatological characteristics of high altitude wind shear and lapse rate layers

NASA Technical Reports Server (NTRS)

Ehernberger, L. J.; Guttman, N. B.

1981-01-01

Indications of the climatological distribution of wind shear and temperature lapse and inversion rates as observed by rawinsonde measurements over the western United States are recorded. Frequencies of the strongest shear, lapse rates, and inversion layer strengths were observed for a 1 year period of record and were tabulated for the lower troposphere, the upper troposphere, and five altitude intervals in the lower stratosphere. Selected bivariate frequencies were also tabulated. Strong wind shears, lapse rates, and inversion are observed less frequently as altitude increases from 175 millibars to 20 millibars. On a seasonal basis the frequencies were higher in winter than in summer except for minor influences due to increased tropopause altitude in summer and the stratospheric wind reversal in the spring and fall.

A table of semiempirical gf values. Part 1: Wavelengths: 5.2682 nm to 272.3380 nm. [to calculate line-blanketed model atmospheres for solar and stellar spectra

NASA Technical Reports Server (NTRS)

Kurucz, R. L.; Peytremann, E.

1975-01-01

The gf values for 265,587 atomic lines selected from the line data used to calculate line-blanketed model atmospheres are tabulated. These data are especially useful for line identification and spectral synthesis in solar and stellar spectra. The gf values are calculated semiempirically by using scaled Thomas-Fermi-Dirac radial wavefunctions and eigenvectors found through least-squares fits to observed energy levels. Included in the calculation are the first five or six stages of ionization for sequences up through nickel. Published gf values are included for elements heavier than nickel. The tabulation is restricted to lines with wavelengths less than 10 micrometers.

An unconventional adaptation of a classical Gaussian plume dispersion scheme for the fast assessment of external irradiation from a radioactive cloud

NASA Astrophysics Data System (ADS)

Pecha, Petr; Pechova, Emilie

2014-06-01

This article focuses on derivation of an effective algorithm for the fast estimation of cloudshine doses/dose rates induced by a large mixture of radionuclides discharged into the atmosphere. A certain special modification of the classical Gaussian plume approach is proposed for approximation of the near-field dispersion problem. Specifically, the accidental radioactivity release is subdivided into consecutive one-hour Gaussian segments, each driven by a short-term meteorological forecast for the respective hours. Determination of the physical quantity of photon fluence rate from an ambient cloud irradiation is coupled to a special decomposition of the Gaussian plume shape into the equivalent virtual elliptic disks. It facilitates solution of the formerly used time-consuming 3-D integration and provides advantages with regard to acceleration of the computational process on a local scale. An optimal choice of integration limit is adopted on the basis of the mean free path of γ-photons in the air. An efficient approach is introduced for treatment of a wide range of energetic spectrum of the emitted photons when the usual multi-nuclide approach is replaced by a new multi-group scheme. The algorithm is capable of generating the radiological responses in a large net of spatial nodes. It predetermines the proposed procedure such as a proper tool for online data assimilation analysis in the near-field areas. A specific technique for numerical integration is verified on the basis of comparison with a partial analytical solution. Convergence of the finite cloud approximation to the tabulated semi-infinite cloud values for dose conversion factors was validated.

19 CFR 201.21 - Availability of specific records.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., graphs, notes, charts, tabulations, data analysis, statistical or information accumulations, records of meetings and conversations, film impressions, magnetic tapes, and sound or mechanical reproductions; the...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gardner, C. J.

Values are given for RHIC circumference shifts due to snakes for various situations. Relevant parameters are tabulated for polarized protons (PP) in the booster and in AGS and RHIC for PP-on-Aluminum stores.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gardner, C. J.

Values are given for RHIC circumference shifts due to snakes for various situations. Relevant parameters are tabulated for polarized protons (PP) in the booster and in AGS and RHIC for PP-on-Au stores.

Estimation of plasma ion saturation current and reduced tip arcing using Langmuir probe harmonics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boedo, J. A.; Rudakov, D. L.

Here we present a method to calculate the ion saturation current, I sat, for Langmuir probes at high frequency (>100 kHz) using the harmonics technique and we compare that to a direct measurement of I sat. It is noted that the Isat estimation can be made directly by the ratio of harmonic amplitudes, without explicitly calculating T e. We also demonstrate that since the probe tips using the harmonic method are oscillating near the floating potential, drawing little power, this method reduces tip heating and arcing and allows plasma density measurements at a plasma power flux that would cause continuouslymore » biased tips to arc. A multi-probe array is used, with two spatially separated tips employing the harmonics technique and measuring the amplitude of at least two harmonics per tip. A third tip, located between the other two, measures the ion saturation current directly. We compare the measured and calculated ion saturation currents for a variety of plasma conditions and demonstrate the validity of the technique and it’s use in reducing arcs.« less

Geodesic acoustic mode (GAM) like oscillations and RMP effect in the STOR-M tokamak

NASA Astrophysics Data System (ADS)

Basu, Debjyoti; Nakajima, Masaru; Melnikov, A. V.; McColl, David; Rohollahi, Akbar; Elgriw, Sayf; Xiao, Chijin; Hirose, Akira

2018-02-01

A new kind of quasi-coherent mode was observed in ohmic plasma in the STOR-M tokamak. It is featured with a clear solitary peak around 30-35 kHz in the power spectra of the ion saturation current (I_sat) of Langmuir probe as well as poloidal and toroidal mode numbers (m  =  1,n  =  0) as per the prediction of conventional geodesic acoustic mode (GAM) theory. The dispersion relation of the mode is also similar to GAM and it also shows collisional damping. In contrast to conventional GAM, the floating potential ϕ of the observed GAM-like mode does not show similar symmetric poloidal and toroidal mode numbers (m  =  0,n  =  0), but has (m  =  1,n  =  1). The GAM-like mode has also a pronounced magnetic component with mixed poloidal modes (m=3~and~m=5; n=1 ), as observed by Mirnov coils. This mode is suppressed by the application of resonance magnetic perturbations.

Iodine Propulsion Advantages for Low Cost Mission Applications and the Iodine Satellite (ISAT) Technology Demonstration

NASA Technical Reports Server (NTRS)

Dankanich, John W.; Schumacher, Daniel M.

2015-01-01

The NASA Marshall Space Flight Center Science and Technology Office is continuously exploring technology options to increase performance or reduce cost and risk to future NASA missions including science and exploration. Electric propulsion is a prevalent technology known to reduce mission costs by reduction in launch costs and spacecraft mass through increased post launch propulsion performance. The exploration of alternative propellants for electric propulsion continues to be of interest to the community. Iodine testing has demonstrated comparable performance to xenon. However, iodine has a higher storage density resulting in higher ?V capability for volume constrained systems. Iodine's unique properties also allow for unpressurized storage yet sublimation with minimal power requirements to produce required gas flow rates. These characteristics make iodine an ideal propellant for secondary spacecraft. A range of mission have been evaluated with a focus on low-cost applications. Results highlight the potential for significant cost reduction over state of the art. Based on the potential, NASA has been developing the iodine Satellite for a near-term iodine Hall propulsion technology demonstration. Mission applications and progress of the iodine Satellite project are presented.

Estimation of plasma ion saturation current and reduced tip arcing using Langmuir probe harmonics

DOE PAGES

Boedo, J. A.; Rudakov, D. L.

2017-03-20

Here we present a method to calculate the ion saturation current, I sat, for Langmuir probes at high frequency (>100 kHz) using the harmonics technique and we compare that to a direct measurement of I sat. It is noted that the Isat estimation can be made directly by the ratio of harmonic amplitudes, without explicitly calculating T e. We also demonstrate that since the probe tips using the harmonic method are oscillating near the floating potential, drawing little power, this method reduces tip heating and arcing and allows plasma density measurements at a plasma power flux that would cause continuouslymore » biased tips to arc. A multi-probe array is used, with two spatially separated tips employing the harmonics technique and measuring the amplitude of at least two harmonics per tip. A third tip, located between the other two, measures the ion saturation current directly. We compare the measured and calculated ion saturation currents for a variety of plasma conditions and demonstrate the validity of the technique and it’s use in reducing arcs.« less

Data report for the Northeast Residential Experiment Station, Apr. 1982

NASA Astrophysics Data System (ADS)

Russell, M. C.; Raghuraman, P.; Mahoney, P. C.

1982-06-01

Physical performance data obtained from photovoltaic energy systems under test at the Northeast Residential Experiment Station (NE RES) in Concord, Massachusetts, are tabulated for the month of April 1982. Five prototype residential photovoltaic systems are under test at the NE RES, each consisting of a roof mounted array sized to meet at least 50% of the annual electrical demand of an energy conserving house, and an enclosed structure to house the remainder of the photovoltaic system equipment, test instrumentation, and work space. Each system is grid connected. In addition, one full sized PV residence, the Carlisle House, is also being monitored in Carlisle, Massachusetts. The features of the systems and of the houses, are briefly summarized, and the monthly performance of the monitored houses, PV systems, and meteorological data is tabulated. Also tabulated is hourly information for an average day of the month including data on the monitored houses and prototype systems data. Data include energy consumption, array and inverter outputs, energy supplied to and by the utility, solar array panel temperatures, and total tilt insolation. Also included are tables that present the hypothetical energy exchange between the system and the utility if each prototype system supplied energy to each monitored house. These data are also graphed, as well as the duration of time for which the load had a specific value.

Aerodynamic Loads at Mach Numbers from 0.70 to 2.22 on an Airplane Model Having a Wing and Canard of Triangular Plan Form and Either Single or Twin Vertical Tails. Supplement 2; Tabulated Data for the Model with Twin Vertical Tails

NASA Technical Reports Server (NTRS)

Peterson, Victor L.; Menees, Gene P.

1961-01-01

Tabulated results of a wind-tunnel investigation of the aerodynamic loads on a canard airplane model with twin vertical tails are presented for Mach numbers from 0.70 to 2.22. The Reynolds number for the measurements was 2.9 x 10(exp 6) based on the wing mean aerodynamic chord. The results include local static-pressure coefficients measured on the wing, body, and one of the vertical tails for angles of attack from -4 degrees to 16 degree angles of sideslip of 0 degrees and 5.3 degrees, and nominal canard deflections of O degrees and 10 degrees. Also included are section force and moment coefficients obtained from integrations of the local pressures and model-component force and moment coefficients obtained from integrations of the section coefficients. Geometric details of the model are shown and the locations of the pressure orifices are shown. An index to the data contained herein is presented and definitions of nomenclature are given. Detailed descriptions of the model and experiments and a brief discussion of some of the results are given. Tabulated results of measurements of the aerodynamic loads on the same canard model but having a single vertical tail instead of twin vertical tails are presented.

7 CFR 275.4 - Record retention.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Stamps and Medicaid Quality Control Reviews, FNS-380-1, Integrated Review Schedule, FNS-245, Negative... materials supporting the review decision; sample lists; sampling frames; tabulation sheets; and reports of...

Typing: Creating a Laboratory Atmosphere

ERIC Educational Resources Information Center

Leonard, Jane A.

1976-01-01

Using materials clipped from newspapers, students in a Typing I laboratory learn how to tabulate, proofread, type letters, and reports, etc., and work independently and evaluate other students' work. (TA)

MODIFICATIONS OF THE RAND REAC,

DTIC Science & Technology

The major items of the modification program were the installation of a removable plugboard of the type used on the International Business Machines punched card tabulators, and a digital readout device.

Tables of stark level transition probabilities and branching ratios in hydrogen-like atoms

NASA Technical Reports Server (NTRS)

Omidvar, K.

1980-01-01

The transition probabilities which are given in terms of n prime k prime and n k are tabulated. No additional summing or averaging is necessary. The electric quantum number k plays the role of the angular momentum quantum number l in the presence of an electric field. The branching ratios between stark levels are also tabulated. Necessary formulas for the transition probabilities and branching ratios are given. Symmetries are discussed and selection rules are given. Some disagreements for some branching ratios are found between the present calculation and the measurement of Mark and Wierl. The transition probability multiplied by the statistical weight of the initial state is called the static intensity J sub S, while the branching ratios are called the dynamic intensity J sub D.

Tabulated Data From a Pressure-Distribution Investigation at Mach Number 2.01 of a 45 Deg Sweptback-Wing Airplane Model at Combined Angles of Attack and Sideslip

NASA Technical Reports Server (NTRS)

Gapcynski, John P.; Landrum, Emma Jean

1958-01-01

A pressure-distribution investigation of a wing-body combination has been conducted in the Langley 4- by 4-foot supersonic pressure tunnel at a Mach number of 2.01. The model configuration consisted of an ogive-circular-cylinder body (fineness ratio of approximately ii) and a wing with 45 deg of sweepback at the quarter-chord line, an aspect ratio of 4, and a taper ratio of 0.2. Data were obtained on high-, mid-, and low-wing configurations and for the body and wing alone for a range of angles of attack and yaw from 0 deg to 15 deg. The tabulated pressure coefficients are presented in this report.

Low speed wind tunnel test of a propulsive wing/canard concept in the STOL configuration. Volume 2: Test data

NASA Technical Reports Server (NTRS)

Stewart, V. R.

1987-01-01

A propulsive wind/canard model was tested at STOL operating conditions in the NASA Langley Research Center 4 x 7 meter wind tunnel. Longitudinal and lateral/directional aerodynamic characteristics were measured for various flap deflections, angles of attack and sideslip, and blowing coefficients. Testing was conducted for several model heights to determine ground proximity effects on the aerodynamic characteristics. Flow field surveys of local flow angles and velocities were performed behind both the canard and the wing. This is volume 2 of a 2 volume report. All of the test data in three appendices are presented. Appendix A presented tabulated six component force and moment data, Appendix B presents tabulated wing pressure coefficients, and Appendix C presents the flow field data.

Evaluation of a Web-Based App Demonstrating an Exclusionary Algorithmic Approach to TNM Cancer Staging

PubMed Central

2015-01-01

Background TNM staging plays a critical role in the evaluation and management of a range of different types of cancers. The conventional combinatorial approach to the determination of an anatomic stage relies on the identification of distinct tumor (T), node (N), and metastasis (M) classifications to generate a TNM grouping. This process is inherently inefficient due to the need for scrupulous review of the criteria specified for each classification to ensure accurate assignment. An exclusionary approach to TNM staging based on sequential constraint of options may serve to minimize the number of classifications that need to be reviewed to accurately determine an anatomic stage. Objective Our aim was to evaluate the usability and utility of a Web-based app configured to demonstrate an exclusionary approach to TNM staging. Methods Internal medicine residents, surgery residents, and oncology fellows engaged in clinical training were asked to evaluate a Web-based app developed as an instructional aid incorporating (1) an exclusionary algorithm that polls tabulated classifications and sorts them into ranked order based on frequency counts, (2) reconfiguration of classification criteria to generate disambiguated yes/no questions that function as selection and exclusion prompts, and (3) a selectable grid of TNM groupings that provides dynamic graphic demonstration of the effects of sequentially selecting or excluding specific classifications. Subjects were asked to evaluate the performance of this app after completing exercises simulating the staging of different types of cancers encountered during training. Results Survey responses indicated high levels of agreement with statements supporting the usability and utility of this app. Subjects reported that its user interface provided a clear display with intuitive controls and that the exclusionary approach to TNM staging it demonstrated represented an efficient process of assignment that helped to clarify distinctions between tumor, node, and metastasis classifications. High overall usefulness ratings were bolstered by supplementary comments suggesting that this app might be readily adopted for use in clinical practice. Conclusions A Web-based app that utilizes an exclusionary algorithm to prompt the assignment of tumor, node, and metastasis classifications may serve as an effective instructional aid demonstrating an efficient and informative approach to TNM staging. PMID:28410163

39 CFR 230.11 - What special definitions apply to these rules?

Code of Federal Regulations, 2010 CFR

2010-07-01

..., calendar and diary entries, graphs, notes, charts, tabulations, data analyses, statistical or information accumulations, records of meetings and conversations, film impressions, magnetic tapes, computer discs, and...

Chromophores with auxochrome-like function

NASA Technical Reports Server (NTRS)

Kauffmann, H.

1985-01-01

Chromophores exist which can exert an auxochromic effect in addition to their chromophoric one. Styryl and cyan radicals are considered. Numerous chromophores were checked and those with auxochromic functions are described and tabulated.

Deterioration and cost information for bridge management.

DOT National Transportation Integrated Search

2012-05-01

This study applies contract bid tabulations and elementlevel condition records to develop elementlevel actions, : costs for actions, transition probabilities for models of deterioration of bridge elements, and transition probabilities : for imp...

Orthogonal sets of data windows constructed from trigonometric polynomials

NASA Technical Reports Server (NTRS)

Greenhall, C. A.

1989-01-01

Suboptimal, easily computable substitutes for the discrete prolate-spheroidal windows used by Thomson for spectral estimation are given. Trigonometric coefficients and energy leakages of the window polynomials are tabulated.

32 CFR 701.111 - Disclosure accounting.

Code of Federal Regulations, 2011 CFR

2011-07-01

... amendments or statements of dispute concerning the record, and provide an audit trail of DON's compliance.... (e) Accurate accounting. A DON activity that does not keep a running tabulation of every disclosure...

Highway Statistics 1980

DOT National Transportation Integrated Search

1980-01-01

This publication brings together annual series of selected statistical tabulations relating to highway transportation in three major areas: (1) Highway use--the ownership and operation of motor vehicles; (2) highway finance--the receipts and expendit...

78 FR 34101 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-06

... and basic descriptive statistics on the quantity and type of consumer-reported patient safety events... conduct correlations, cross tabulations of responses and other statistical analysis. Estimated Annual...

10 CFR 434.301 - Design criteria.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) 586-9127. Adjustments may be made to reflect local climates which differ from the tabulated... climatic data are not available, climate data from a nearby location included in RS-1, appendix C...

10 CFR 434.301 - Design criteria.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) 586-9127. Adjustments may be made to reflect local climates which differ from the tabulated... climatic data are not available, climate data from a nearby location included in RS-1, appendix C...

10 CFR 434.301 - Design criteria.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) 586-9127. Adjustments may be made to reflect local climates which differ from the tabulated... climatic data are not available, climate data from a nearby location included in RS-1, appendix C...

10 CFR 434.301 - Design criteria.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) 586-9127. Adjustments may be made to reflect local climates which differ from the tabulated... climatic data are not available, climate data from a nearby location included in RS-1, Appendix C...

Highway statistics 2007

DOT National Transportation Integrated Search

2007-01-01

This publication brings together annual series of selected statistical tabulations relating to highway transportation in four major areas: (1) highway infrastructure and users; (2) motor vehicles and fuel; (3) highway finance--the receipts and expend...

10 CFR 434.301 - Design criteria.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) 586-9127. Adjustments may be made to reflect local climates which differ from the tabulated... climatic data are not available, climate data from a nearby location included in RS-1, Appendix C...

Incorporation of Failure Into an Orthotropic Three-Dimensional Model with Tabulated Input Suitable for Use in Composite Impact Problems

NASA Technical Reports Server (NTRS)

Goldberg, Robert K.; Carney, Kelly S.; Dubois, Paul; Hoffarth, Canio; Khaled, Bilal; Shyamsunder, Loukham; Rajan, Subramaniam; Blankenhorn, Gunther

2017-01-01

The need for accurate material models to simulate the deformation, damage and failure of polymer matrix composites under impact conditions is becoming critical as these materials are gaining increased use in the aerospace and automotive communities. The aerospace community has identified several key capabilities which are currently lacking in the available material models in commercial transient dynamic finite element codes. To attempt to improve the predictive capability of composite impact simulations, a next generation material model is being developed for incorporation within the commercial transient dynamic finite element code LS-DYNA. The material model, which incorporates plasticity, damage and failure, utilizes experimentally based tabulated input to define the evolution of plasticity and damage and the initiation of failure as opposed to specifying discrete input parameters such as modulus and strength. The plasticity portion of the orthotropic, three-dimensional, macroscopic composite constitutive model is based on an extension of the Tsai-Wu composite failure model into a generalized yield function with a non-associative flow rule. For the damage model, a strain equivalent formulation is used to allow for the uncoupling of the deformation and damage analyses. In the damage model, a semi-coupled approach is employed where the overall damage in a particular coordinate direction is assumed to be a multiplicative combination of the damage in that direction resulting from the applied loads in various coordinate directions. For the failure model, a tabulated approach is utilized in which a stress or strain based invariant is defined as a function of the location of the current stress state in stress space to define the initiation of failure. Failure surfaces can be defined with any arbitrary shape, unlike traditional failure models where the mathematical functions used to define the failure surface impose a specific shape on the failure surface. In the current paper, the complete development of the failure model is described and the generation of a tabulated failure surface for a representative composite material is discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chisolm, Eric D.

I explain how to evaluate a multiphase EOS at a given density and energy, which is the standard case in hydrodynamic simulations, when the EOS is provided in the form of individual EOS for each phase and tabulated phase boundaries.

Adequacy of rut bar data collection

DOT National Transportation Integrated Search

1994-01-01

This publication brings together the 1994 annual series of selected statistical tabulations relating to highway transportation - highway use--the ownership and operation of motor vehicles; highway finance--the receipts and expenditures for highways b...

The causes of fires on northeastern national forests.

Treesearch

William A. Main; Donald A. Haines

1974-01-01

Presents cross-tabulations of classes of people, activities, and causes responsible for forest fires on national forests. The data combinations indicate that greater prevention efforts might be directed toward hunters and fishermen.

Student Attitudes Toward Grades and Grading Practices.

ERIC Educational Resources Information Center

Stallings, William M.; Leslie, Elwood K.

The result of a study designed to assess student attitudes toward grading practices are discussed. Questionnaire responses of 3439 students in three institutions were tabulated. Responses were generally negative toward conventional grading systems. (MS)

21 CFR 312.33 - Annual reports.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., tabulated by age group, gender, and race; the number whose participation in the study was completed as... suspension from marketing in any country. (g) If desired by the sponsor, a log of any outstanding business...

The woody biomass resource of Tennessee, 1989

Treesearch

James F. Rosson

1993-01-01

Tabulates fresh and dry biomass estimates of major trees in Tennessee by forest type, ownership, species, stand basal area, tree class, diameter, and height. Information is presented for total tree, stem, and crown components.

GRAVITY DATA OBTAINED DURING CHAIN CRUISE NO. 70.

DTIC Science & Technology

Profiles, tabulations, and charts are presented of principal gravity facts, free-air gravity anomalies, and simple Bouguer gravity anomalies obtained in the western North Atlantic Ocean during R/V CHAIN cruise 70. (Author)

40 CFR 146.82 - Required Class VI permit information.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., Class II, or Class V experimental wells, certain maps, cross-sections, tabulations of wells within the.../facies changes based on field data which may include geologic cores, outcrop data, seismic surveys, well...

40 CFR 146.82 - Required Class VI permit information.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., Class II, or Class V experimental wells, certain maps, cross-sections, tabulations of wells within the.../facies changes based on field data which may include geologic cores, outcrop data, seismic surveys, well...

40 CFR 146.82 - Required Class VI permit information.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., Class II, or Class V experimental wells, certain maps, cross-sections, tabulations of wells within the.../facies changes based on field data which may include geologic cores, outcrop data, seismic surveys, well...

40 CFR 146.82 - Required Class VI permit information.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., Class II, or Class V experimental wells, certain maps, cross-sections, tabulations of wells within the.../facies changes based on field data which may include geologic cores, outcrop data, seismic surveys, well...

Environmental justice assessment for transportation : risk analysis

DOT National Transportation Integrated Search

1999-04-01

This paper presents methods of comparing populations and their racial/ethnic compositions using tabulations, histograms, and Chi Squared tests for statistical significance of differences found. Two examples of these methods are presented: comparison ...

The woody biomass resource of Louisiana, 1991

Treesearch

James F. Rosson

1993-01-01

Tabulates fresh and dry biomass estimates of major trees in Louisiana by forest type, ownership, species, stand basal area, tree class, diameter, and height. Information is presented for total tree, stem, and crown components.

Slurry combustion. Volume 2: Appendices, Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Essenhigh, R.

1993-06-01

Volume II contains the following appendices: coal analyses and slurryability characteristics; listings of programs used to call and file experimental data, and to reduce data in enthalpy and efficiency calculations; and tabulated data sets.

2013 Review of Neutron and Non-Neutron Nuclear Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holden, N. E.

2014-05-23

The results of a review and evaluation of neutron and non-neutron nuclear data published in the scientific literature over the past three years since the ISRD-14 Symposium has been performed and the highlights are presented. Included in the data review are the status of new chemical elements, new measurements of the isotopic composition for many chemical elements and the resulting change in the atomic weight values. New half-life measurements for both short-lived and longlived nuclides, some alpha decay and double beta decay measurements for quasistable nuclides are discussed. The latest evaluation of atomic masses has been published. Data from newmore » measurements on the very heavy (trans-meitnerium) elements are discussed and tabulated. Data on various recent neutron cross section and resonance integral measurements are discussed and tabulated.« less

Knot probabilities in random diagrams

NASA Astrophysics Data System (ADS)

Cantarella, Jason; Chapman, Harrison; Mastin, Matt

2016-10-01

We consider a natural model of random knotting—choose a knot diagram at random from the finite set of diagrams with n crossings. We tabulate diagrams with 10 and fewer crossings and classify the diagrams by knot type, allowing us to compute exact probabilities for knots in this model. As expected, most diagrams with 10 and fewer crossings are unknots (about 78% of the roughly 1.6 billion 10 crossing diagrams). For these crossing numbers, the unknot fraction is mostly explained by the prevalence of ‘tree-like’ diagrams which are unknots for any assignment of over/under information at crossings. The data shows a roughly linear relationship between the log of knot type probability and the log of the frequency rank of the knot type, analogous to Zipf’s law for word frequency. The complete tabulation and all knot frequencies are included as supplementary data.

Tabulation of hybrid theory calculated e-N2 vibrational and rotational cross sections

NASA Technical Reports Server (NTRS)

Chandra, N.; Temkin, A.

1976-01-01

Vibrational excitation cross sections of N2 by electron impact are tabulated. Integrated cross sections are given for transitions v yields v prime where o=or v=or 8 in the energy range 0.1 eV=or E=or 10 eV. The energy grid is chosen to be most dense in the resonance region (2 to 4 eV) so that the substructure is present in the numerical results. Coefficients in the angular distribution formula (differential scattering cross section) for transitions v=0 yields v prime = or 8 are also numerically given over the same grid of energies. Simultaneous rotation-vibration coefficients are also given for transitions v=o,j=o; 1 yields v prime=o, j=o,2,4; 1,3,5. All results are obtained from the hybrid theory.

Static stability and control effectiveness of models 12-0 and 34-0 of the vehicle 3 configuration, volume 3. [tabulated source data

NASA Technical Reports Server (NTRS)

Allen, E. C.; Tuttle, T.

1973-01-01

Static stability and control effectiveness characteristics of two 0.004 scale models of the vehicle 3 configuration are reported. The components investigated consisted of a single aft body, vertical/rudder, OMS pods with two interchangeable wings, four interchangeable forward bodies, four trimmers, and a spoiler. The test was conducted in 14 x 14 inch trisonic wind tunnel over a Mach number range from 0.6 to 4.96. Angles of attack from 0 to 60 degrees and angles of sideslip from -10 to 10 degrees at 0, 10, 20,30, and 40 degrees angle of attack were tested. Elevon, body flap, and speed brake deflection composed the parametric considerations. No grit was placed on the models during the test. The tabulated source data and incremental data figures are presented.

Map and tabulation of quaternary mass movements along the United States-Canadian Atlantic continental slope from 32 degrees 00 minutes to 47 degrees 00 minutes N. latitude

USGS Publications Warehouse

Booth, J.S.; O'Leary, Dennis W.; Popenoe, Peter; Robb, James M.; McGregor, B.A.

1988-01-01

Since the initial report on the Grand Banks Slump off southern Newfoundland (Heezen and Ewing, 1952), a large body of data on submarine mass movement along the Atlantic continental margin of the United States and Canada has been published.  These data were compiled to provide this distribution map (sheet 1) and tabulation (sheet 2) of "principal facts" on mass movement of the northwest Atlantic Continental Slope.  Although we prepared this inventory to facilitate our study of Quaternary mass movement along the U.S. Continental Slope, we judged the compilation to be large enough and detailed enough to be published as a generally useful data source and compendium.  Sheet 3 shows examples of mass movement styles.

International energy indicators

NASA Astrophysics Data System (ADS)

Weiss, R. M.

1981-05-01

Tabulated data and graphic displays are presented for: world crude oil production for each year since 1974; OPEC crude oil production capacity; world crude oil and refined product inventory level for each year since 1975; oil consumption in CECD Countries for each year since 1975; USSR crude oil production for each year since 1975; and the free World and US nuclear electricity generation for 1973 and the current capacity. Also, tabulated data and graphic displays are included on: US domestic oil supply for each year since 1977; US gross imports of crude oil and products for each year since 1973; landed cost of Saudi crude in current and 1974 dollars; US coal trade for each year since 1975; US natural gas trade for each year since 1975; a summary of US merchandise trade for each year since 1977; and the US energy/GNP ratio in 1972 dollars.

AVE/VAS 3: 25-mb sounding data

NASA Technical Reports Server (NTRS)

Sienkiewicz, M. E.

1982-01-01

The rawinsonde sounding program for the AVE/VAS 3 experiment is described. Tabulated data are presented at 25-mb intervals for the 24 National Weather Service stations and 14 special stations participating in the experiment. Soundings were taken at 3-hr intervals, beginning at 1200 GMT on March 27, 1982, and ending at 0600 GMT on March 28, 1982 (7 sounding times). An additional sounding was taken at the National Weather Service stations at 1200 GMT on March 28, 1982, at the normal synoptic observation time. The method of processing soundings is briefly discussed, estimates of the RMS errors in the data are presented, and an example of contact data is given. Termination pressures of soundings taken in the mesos-beta-scale network are tabulated, as are observations of ground temperature at a depth of 2 cm.

Explicit 2-D Hydrodynamic FEM Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Jerry

1996-08-07

DYNA2D* is a vectorized, explicit, two-dimensional, axisymmetric and plane strain finite element program for analyzing the large deformation dynamic and hydrodynamic response of inelastic solids. DYNA2D* contains 13 material models and 9 equations of state (EOS) to cover a wide range of material behavior. The material models implemented in all machine versions are: elastic, orthotropic elastic, kinematic/isotropic elastic plasticity, thermoelastoplastic, soil and crushable foam, linear viscoelastic, rubber, high explosive burn, isotropic elastic-plastic, temperature-dependent elastic-plastic. The isotropic and temperature-dependent elastic-plastic models determine only the deviatoric stresses. Pressure is determined by one of 9 equations of state including linear polynomial, JWL highmore » explosive, Sack Tuesday high explosive, Gruneisen, ratio of polynomials, linear polynomial with energy deposition, ignition and growth of reaction in HE, tabulated compaction, and tabulated.« less

Shear flow control of cold and heated rectangular jets by mechanical tabs. Volume 2: Tabulated data

NASA Technical Reports Server (NTRS)

Brown, W. H.; Ahuja, K. K.

1989-01-01

The effects of mechanical protrusions on the jet mixing characteristics of rectangular nozzles for heated and unheated subsonic and supersonic jet plumes were studied. The characteristics of a rectangular nozzle of aspect ratio 4 without the mechanical protrusions were first investigated. Intrusive probes were used to make the flow measurements. Possible errors introduced by intrusive probes in making shear flow measurements were also examined. Several scaled sizes of mechanical tabs were then tested, configured around the perimeter of the rectangular jet. Both the number and the location of the tabs were varied. From this, the best configuration was selected. This volume contains tabulated data for each of the data runs cited in Volume 1. Baseline characteristics, mixing modifications (subsonic and supersonic, heated and unheated) and miscellaneous charts are included.

An analysis of MCNP cross-sections and tally methods for low-energy photon emitters.

PubMed

Demarco, John J; Wallace, Robert E; Boedeker, Kirsten

2002-04-21

Monte Carlo calculations are frequently used to analyse a variety of radiological science applications using low-energy (10-1000 keV) photon sources. This study seeks to create a low-energy benchmark for the MCNP Monte Carlo code by simulating the absolute dose rate in water and the air-kerma rate for monoenergetic point sources with energies between 10 keV and 1 MeV. The analysis compares four cross-section datasets as well as the tally method for collision kerma versus absorbed dose. The total photon attenuation coefficient cross-section for low atomic number elements has changed significantly as cross-section data have changed between 1967 and 1989. Differences of up to 10% are observed in the photoelectric cross-section for water at 30 keV between the standard MCNP cross-section dataset (DLC-200) and the most recent XCOM/NIST tabulation. At 30 keV, the absolute dose rate in water at 1.0 cm from the source increases by 7.8% after replacing the DLC-200 photoelectric cross-sections for water with those from the XCOM/NIST tabulation. The differences in the absolute dose rate are analysed when calculated with either the MCNP absorbed dose tally or the collision kerma tally. Significant differences between the collision kerma tally and the absorbed dose tally can occur when using the DLC-200 attenuation coefficients in conjunction with a modern tabulation of mass energy-absorption coefficients.

TU-F-17A-08: The Relative Accuracy of 4D Dose Accumulation for Lung Radiotherapy Using Rigid Dose Projection Versus Dose Recalculation On Every Breathing Phase

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lamb, J; Lee, C; Tee, S

2014-06-15

Purpose: To investigate the accuracy of 4D dose accumulation using projection of dose calculated on the end-exhalation, mid-ventilation, or average intensity breathing phase CT scan, versus dose accumulation performed using full Monte Carlo dose recalculation on every breathing phase. Methods: Radiotherapy plans were analyzed for 10 patients with stage I-II lung cancer planned using 4D-CT. SBRT plans were optimized using the dose calculated by a commercially-available Monte Carlo algorithm on the end-exhalation 4D-CT phase. 4D dose accumulations using deformable registration were performed with a commercially available tool that projected the planned dose onto every breathing phase without recalculation, as wellmore » as with a Monte Carlo recalculation of the dose on all breathing phases. The 3D planned dose (3D-EX), the 3D dose calculated on the average intensity image (3D-AVE), and the 4D accumulations of the dose calculated on the end-exhalation phase CT (4D-PR-EX), the mid-ventilation phase CT (4D-PR-MID), and the average intensity image (4D-PR-AVE), respectively, were compared against the accumulation of the Monte Carlo dose recalculated on every phase. Plan evaluation metrics relating to target volumes and critical structures relevant for lung SBRT were analyzed. Results: Plan evaluation metrics tabulated using 4D-PR-EX, 4D-PR-MID, and 4D-PR-AVE differed from those tabulated using Monte Carlo recalculation on every phase by an average of 0.14±0.70 Gy, - 0.11±0.51 Gy, and 0.00±0.62 Gy, respectively. Deviations of between 8 and 13 Gy were observed between the 4D-MC calculations and both 3D methods for the proximal bronchial trees of 3 patients. Conclusions: 4D dose accumulation using projection without re-calculation may be sufficiently accurate compared to 4D dose accumulated from Monte Carlo recalculation on every phase, depending on institutional protocols. Use of 4D dose accumulation should be considered when evaluating normal tissue complication probabilities as well as in clinical situations where target volumes are directly inferior to mobile critical structures.« less

Clinical application of the pO(2)-pCO(2) diagram.

PubMed

Paulev, P-E; Siggaard-Andersen, O

2004-10-01

Based on the classic, linear blood gas diagram a logarithmic blood gas map was constructed. The scales were extended by the use of logarithmic axes in order to allow for high patient values. Patients with lung disorders often have high arterial carbon dioxide tensions, and patients on supplementary oxygen typically respond with high oxygen tensions off the scale of the classic diagram. Two case histories illustrate the clinical application of the logarithmic blood gas map. Variables from the two patients were measured by the use of blood gas analysis equipment. Measured and calculated values are tabulated. The calculations were performed using the oxygen status algorithm. When interpreting the graph for a given patient it is recommended first to observe the location of the marker for the partial pressure of oxygen in inspired, humidified air (I) to see whether the patient is breathing atmospheric air or air with supplementary oxygen. Then observe the location of the arterial point (a) to see whether hypoxemia or hypercapnia appears to be the primary disturbance. Finally observe the alveolo-arterial oxygen tension difference to estimate the degree of veno-arterial shunting. If the mixed venous point (v) is available, then observe the value of the mixed venous oxygen tension. This is the most important indicator of global tissue hypoxia.

Studies in automatic speech recognition and its application in aerospace

NASA Astrophysics Data System (ADS)

Taylor, Michael Robinson

Human communication is characterized in terms of the spectral and temporal dimensions of speech waveforms. Electronic speech recognition strategies based on Dynamic Time Warping and Markov Model algorithms are described and typical digit recognition error rates are tabulated. The application of Direct Voice Input (DVI) as an interface between man and machine is explored within the context of civil and military aerospace programmes. Sources of physical and emotional stress affecting speech production within military high performance aircraft are identified. Experimental results are reported which quantify fundamental frequency and coarse temporal dimensions of male speech as a function of the vibration, linear acceleration and noise levels typical of aerospace environments; preliminary indications of acoustic phonetic variability reported by other researchers are summarized. Connected whole-word pattern recognition error rates are presented for digits spoken under controlled Gz sinusoidal whole-body vibration. Correlations are made between significant increases in recognition error rate and resonance of the abdomen-thorax and head subsystems of the body. The phenomenon of vibrato style speech produced under low frequency whole-body Gz vibration is also examined. Interactive DVI system architectures and avionic data bus integration concepts are outlined together with design procedures for the efficient development of pilot-vehicle command and control protocols.

Performance of thermal deposition and mass flux condition on bioconvection nanoparticles containing gyrotactic microorganisms

NASA Astrophysics Data System (ADS)

Iqbal, Z.; Ahmad, Bilal

2017-11-01

This is an attempt to investigate the influence of thermal radiation on the movement of motile gyrotactic microorganisms submerged in a water-based nanofluid flow over a nonlinear stretching sheet. The mathematical modeling of this physical problem leads to a system of nonlinear coupled partial differential equations. The problem is tackled by converting nonlinear partial differential equations into the system of highly nonlinear ordinary differential equations. The resulting nonlinear equations of momentum, energy, concentration of nanoparticles and motile gyrotactic microorganisms along with the mass flux condition are solved numerically by means of a shooting algorithm. The effects of the involved physical parameters of interest are discussed graphically. The values of the skin friction coefficient, Nusselt number, Sherwood number and local density number of motile microorganisms are tabulated for detailed analysis on the flow pattern at the stretching surface. It is concluded that the nanofluid temperature is an increasing function of the thermal radiation and the Biot number parameter. An opposite trend is observed for the local Nusselt number. The association with the preceding results in limiting sense is shown as well. A tremendous agreement of the current study in a restrictive manner is achieved as well. In addition, flow configurations through stream functions are presented and deliberated significantly.

Adaptive Kalman filter based on variance component estimation for the prediction of ionospheric delay in aiding the cycle slip repair of GNSS triple-frequency signals

NASA Astrophysics Data System (ADS)

Chang, Guobin; Xu, Tianhe; Yao, Yifei; Wang, Qianxin

2018-01-01

In order to incorporate the time smoothness of ionospheric delay to aid the cycle slip detection, an adaptive Kalman filter is developed based on variance component estimation. The correlations between measurements at neighboring epochs are fully considered in developing a filtering algorithm for colored measurement noise. Within this filtering framework, epoch-differenced ionospheric delays are predicted. Using this prediction, the potential cycle slips are repaired for triple-frequency signals of global navigation satellite systems. Cycle slips are repaired in a stepwise manner; i.e., for two extra wide lane combinations firstly and then for the third frequency. In the estimation for the third frequency, a stochastic model is followed in which the correlations between the ionospheric delay prediction errors and the errors in the epoch-differenced phase measurements are considered. The implementing details of the proposed method are tabulated. A real BeiDou Navigation Satellite System data set is used to check the performance of the proposed method. Most cycle slips, no matter trivial or nontrivial, can be estimated in float values with satisfactorily high accuracy and their integer values can hence be correctly obtained by simple rounding. To be more specific, all manually introduced nontrivial cycle slips are correctly repaired.

A comparison of image processing techniques for bird recognition.

PubMed

Nadimpalli, Uma D; Price, Randy R; Hall, Steven G; Bomma, Pallavi

2006-01-01

Bird predation is one of the major concerns for fish culture in open ponds. A novel method for dispersing birds is the use of autonomous vehicles. Image recognition software can improve their efficiency. Several image processing techniques for recognition of birds have been tested. A series of morphological operations were implemented. We divided images into 3 types, Type 1, Type 2, and Type 3, based on the level of difficulty of recognizing birds. Type 1 images were clear; Type 2 images were medium clear, and Type 3 images were unclear. Local thresholding has been implemented using HSV (Hue, Saturation, and Value), GRAY, and RGB (Red, Green, and Blue) color models on all three sections of images and results were tabulated. Template matching using normal correlation and artificial neural networks (ANN) are the other methods that have been developed in this study in addition to image morphology. Template matching produced satisfactory results irrespective of the difficulty level of images, but artificial neural networks produced accuracies of 100, 60, and 50% on Type 1, Type 2, and Type 3 images, respectively. Correct classification rate can be increased by further training. Future research will focus on testing the recognition algorithms in natural or aquacultural settings on autonomous boats. Applications of such techniques to industrial, agricultural, or related areas are additional future possibilities.

The Reference Forward Model (RFM)

NASA Astrophysics Data System (ADS)

Dudhia, Anu

2017-01-01

The Reference Forward Model (RFM) is a general purpose line-by-line radiative transfer model, currently supported by the UK National Centre for Earth Observation. This paper outlines the algorithms used by the RFM, focusing on standard calculations of terrestrial atmospheric infrared spectra followed by a brief summary of some additional capabilities and extensions to microwave wavelengths and extraterrestrial atmospheres. At its most basic level - the 'line-by-line' component - it calculates molecular absorption cross-sections by applying the Voigt lineshape to all transitions up to ±25 cm-1 from line-centre. Alternatively, absorptions can be directly interpolated from various forms of tabulated data. These cross-sections are then used to construct infrared radiance or transmittance spectra for ray paths through homogeneous cells, plane-parallel or circular atmospheres. At a higher level, the RFM can apply instrumental convolutions to simulate measurements from Fourier transform spectrometers. It can also calculate Jacobian spectra and so act as a stand-alone forward model within a retrieval scheme. The RFM is designed for robustness, flexibility and ease-of-use (particularly by the non-expert), and no claims are made for superior accuracy, or indeed novelty, compared to other line-by-line codes. Its main limitations at present are a lack of scattering and simplified modelling of surface reflectance and line-mixing.

77 FR 55475 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-10

... collected will be analyzed to produce estimates and basic descriptive statistics on the quantity and type of... mode of data collection by event types, and conduct correlations, cross tabulations of responses and...

College Student Attitudes Toward Marijuana

ERIC Educational Resources Information Center

Amo, Michael F.; Bittner, John R.

1970-01-01

Questionnaire attempts to determine attitudes in effort to learn how students perceive danger, or lack of it, in the use of marihuana. Tabulated responses are presented, and while no conclusions are drawn several interpretations are suggested. (Author/CJ)

Peridinialean dinoflagellate plate patterns, labels and homologies

USGS Publications Warehouse

Edwards, L.E.

1990-01-01

Tabulation patterns for peridinialean dinoflagellate thecae and cysts have been traditionally expressed using a plate labelling system described by C.A. Kofoid in the early 1900's. This system can obscure dinoflagellate plate homologies and has not always been strictly applied. The plate-labelling system presented here introduces new series labels but incorporates key features and ideas from the more recently proposed systems of G.L. Eaton and F.J.R. Taylor, as modified by W.R. Evitt. Plate-series recognition begins with the cingulum (C-series) and proceeds from the cingulum toward the apex for the three series of the epitheca/epicyst and proceeds from the cingulum toward the antapex for the two series of the hypotheca/hypocyst. The epithecal/epicystal model consists of eight plates that touch the anterior margin of the cingulum (E-series: plates E1-E7, ES), seven plates toward the apex that touch the E-series plates (M-series: R, M1-M6), and up to seven plates near the apex that do not touch E-series plates (D-series: Dp-Dv). The hypothecal/hypocystal model consists of eight plates that touch the posterior margin of the cingulum (H-series: H1-H6,HR,HS) and three plates toward the antapex (T1-T3). Epithecal/epicystal tabulation patterns come in both 8- and 7- models, corresponding to eight and seven plates, respectively, in the E-series. Hypothecal/hypocystal tabulation patterns also come in both 8- and 7-models, corresponding to eight and seven plates, respectively, in the H-series. By convention, the 7-model epitheca/epicyst has no plates E1 and M1; the 7-model hypotheca/hypocyst has no plate H6. Within an 8-model or 7-model, the system emphasizes plates that are presumed to be homologous by giving them identical labels. I introduce the adjectives "monothigmate", "dithigmate," and "trithigmate" to designate plates touching one, two, and three plates, respectively, of the adjacent series. The term "thigmation" applies to the analysis of plate contacts between plate series as a guide to interpretation. Application of the proposed plate labelling system involves: (1) locating the cingulum and identifying the plate series, (2) identifying the landmark plates within each series, (3) assigning appropriate plate numbers to plates in the E- and H-series, (4) assigning appropriate plate numbers to the remaining plates using thigmation and interactions of diagonally opposite pairs of plates (quartets) as guides to interpretation. A "typical" gonyaulacoid tabulation pattern combines a 7-model epitheca/epicyst and an 8-model hypotheca/hypocyst. A "typical" peridinioid tabulation pattern combines an 8-model epitheca/epicyst and a 7-model hypotheca/hypocyst. The group that is presently termed partiform gonyaulacoid (which includes the modern genus Cladopyxis Stein and the fossil Microdinium Cookson and Eisenack) has an 8-model epitheca/epicyst and an 8-model hypotheca/hypocyst. ?? 1990.

Monthly fire behavior patterns

Treesearch

Mark J. Schroeder; Craig C. Chandler

1966-01-01

From tabulated frequency distributions of fire danger indexes for a nationwide network of 89 stations, the probabilities of four types of fire behavior ranging from 'fire out' to 'critical' were calculated for each month and are shown in map form.

SRB ascent aerodynamic heating design criteria reduction study, volume 2

NASA Technical Reports Server (NTRS)

Crain, W. K.; Frost, C. L.; Engel, C. D.

1989-01-01

Data are presented for the wind tunnel interference heating factor data base, the timewise tabulated ascent design environments, and the timewise plotted environments comparing the REMTECH results to the Rockwell RI-IVBC-3 results.

Three-track runway and taxiway profiles measured at international airports I and J

NASA Technical Reports Server (NTRS)

Hall, A. W.

1972-01-01

Three-track runway and taxiway profiles are presented for use in studies of airplane response to ground roughness. Tabulated and plotted data for two international airports, (designated I and J), are included.

Maritime Casualty Tabulation (1972)

DOT National Transportation Integrated Search

1975-01-01

The report creates a data base of the maritime casualties during 1972 which would have been candidates for a distress channel in a satellite communications service. There are 1546 casualties recorded in this report for the calendar year 1972; of thes...

The Incidence of Obesity Among College Students

ERIC Educational Resources Information Center

Pargman, David

1969-01-01

Tabulates results of examination of 2,343 health records at Boston University. Compares low findings with those of similar studies (Cannon and Mayer; Hathaway and Foard; Manhattan Mental Health Study.) Suggests relationship between obesity and educational philosophy. (CJ)

Tables of critical-flow functions and thermodynamic properties for methane and computational procedures for both methane and natural gas

NASA Technical Reports Server (NTRS)

Johnson, R. C.

1972-01-01

Procedures for calculating the mass flow rate of methane and natural gas through nozzles are given, along with the FORTRAN 4 subroutines used to make these calculations. Three sets of independent variables are permitted in these routines. In addition to the plenum pressure and temperature, the third independent variable is either nozzle exit pressure, Mach number, or temperature. A critical-flow factor that becomes a convenient means for determining the mass flow rate of methane through critical-flow nozzles is tabulated. Other tables are included for nozzle throat velocity and critical pressure, density, and temperature ratios, along with some thermodynamic properties of methane, including compressibility factor, enthalpy, entropy, specific heat, specific-heat ratio, and speed of sound. These tabulations cover a temperature range from 120 to 600 K and pressures to 3 million N/sq m.

Water-quality data (October 1988 through September 1989) and statistical summaries (March 1985 through September 1989) for the Clark Fork and selected tributaries from Galen to Missoula, Montana

USGS Publications Warehouse

Lambing, J.H.

1990-01-01

Water quality sampling was conducted at eight sites on the Clark Fork and selected tributaries from Galen to Missoula, from October 1988 through September 1989. This report presents tabulations and statistical summaries of the water quality data. Included are tabulations of streamflow, onsite water quality, and concentrations of trace elements and suspended sediment for periodic samples. Also included are tables and hydrographs of daily mean values for streamflow, suspended-sediment concentration, and suspended-sediment discharge at three mainstem stations and one tributary. Statistical summaries are presented for periodic water quality data collected from March 1985 through September 1989. Selected data are illustrated by graphs showing median concentrations of trace elements in water, relation of trace-element concentrations to suspended-sediment concentrations, and median concentrations of trace elements in suspended sediment. (USGS)

Water-quality data (October 1987 through September 1988) and statistical summaries (March 1985 through September 1988) for the Clark Fork and selected tributaries from Galen to Missoula, Montana

USGS Publications Warehouse

Lambing, John H.

1989-01-01

Water quality sampling was conducted at eight sites on the Clark Fork and selected tributaries from Galen to Missoula, Mont., from October 1987 through September 1988. This report presents tabulations and statistical summaries of the water quality data. Included in this report are tabulations of streamflow, onsite water quality, and concentrations of trace elements and suspended sediment for periodic samples. Also included are tables and hydrographs of daily mean values for streamflow, suspended-sediment concentration, and suspended-sediment discharge at three mainstream stations and one tributary. Statistical summaries are presented for periodic water quality data collected from March 1985 through September 1988. Selected data are illustrated by graphs showing median concentrations of trace elements in water, relation of trace element concentrations to suspended-sediment concentrations, and median concentrations of trace elements in suspended sediments. (USGS)

Comparing in Cylinder Pressure Modelling of a DI Diesel Engine Fuelled on Alternative Fuel Using Two Tabulated Chemistry Approaches.

PubMed

Ngayihi Abbe, Claude Valery; Nzengwa, Robert; Danwe, Raidandi

2014-01-01

The present work presents the comparative simulation of a diesel engine fuelled on diesel fuel and biodiesel fuel. Two models, based on tabulated chemistry, were implemented for the simulation purpose and results were compared with experimental data obtained from a single cylinder diesel engine. The first model is a single zone model based on the Krieger and Bormann combustion model while the second model is a two-zone model based on Olikara and Bormann combustion model. It was shown that both models can predict well the engine's in-cylinder pressure as well as its overall performances. The second model showed a better accuracy than the first, while the first model was easier to implement and faster to compute. It was found that the first method was better suited for real time engine control and monitoring while the second one was better suited for engine design and emission prediction.

Eumetazoan fossils in terminal Proterozoic phosphorites?

PubMed Central

Xiao, Shuhai; Yuan, Xunlai; Knoll, Andrew H.

2000-01-01

Phosphatic sedimentary rocks preserve a record of early animal life different from and complementary to that provided by Ediacaran fossils in terminal Proterozoic sandstones and shales. Phosphorites of the Doushantuo Formation, South China, contain eggs, egg cases, and stereoblastulae that document animals of unspecified phylogenetic position; small fossils containing putative spicules may specifically record the presence of sponges. Microfossils recently interpreted as the preserved gastrulae of cnidarian and bilaterian metazoans can alternatively be interpreted as conventional algal cysts and/or egg cases modified by diagenetic processes known to have had a pervasive influence on Doushantuo phosphorites. Regardless of this interpretation, evidence for Doushantuo eumetazoans is provided by millimeter-scale tubes that display tabulation and apical budding characteristic of some Cnidaria, especially the extinct tabulates. Like some Ediacaran remains, these small, benthic, colonial fossils may represent stem-group eumetazoans or stem-group cnidarians that lived in the late Proterozoic ocean. PMID:11095754

The Alexandria library, a quantum-chemical database of molecular properties for force field development.

PubMed

Ghahremanpour, Mohammad M; van Maaren, Paul J; van der Spoel, David

2018-04-10

Data quality as well as library size are crucial issues for force field development. In order to predict molecular properties in a large chemical space, the foundation to build force fields on needs to encompass a large variety of chemical compounds. The tabulated molecular physicochemical properties also need to be accurate. Due to the limited transparency in data used for development of existing force fields it is hard to establish data quality and reusability is low. This paper presents the Alexandria library as an open and freely accessible database of optimized molecular geometries, frequencies, electrostatic moments up to the hexadecupole, electrostatic potential, polarizabilities, and thermochemistry, obtained from quantum chemistry calculations for 2704 compounds. Values are tabulated and where available compared to experimental data. This library can assist systematic development and training of empirical force fields for a broad range of molecules.

Toxicity of 35 trace elements in coal to freshwater biota: a data base with automated retrieval capabilities. [313 references

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cushman, R. M.; Hildebrand, S. G.; Strand, R. H.

1977-06-01

Data are tabulated on the toxicity to freshwater biota of 35 trace elements with the potential for release to the environment from coal conversion effluents. The entire data base is presented on a microfiche appended to the document, in the interest of portability and accessibility. The data were gathered from a variety of research papers, compendia, and reviews. Details of water chemistry and test conditions are presented when available from the documents consulted. The data base may be used by referring directly to the tabulated data as they appear on the microfiche, or, with appropriate computer facilities, by manipulation (sorting,more » subsetting, or merging) of the data to meet the particular needs of the investigator. The data may be used as they appear in the data base, or the data base may be used to index the cited original papers.« less

Cape Canaveral, Florida range reference atmosphere 0-70 km altitude

NASA Technical Reports Server (NTRS)

Tingle, A. (Editor)

1983-01-01

The RRA contains tabulations for monthly and annual means, standard deviations, skewness coefficients for wind speed, pressure temperature, density, water vapor pressure, virtual temperature, dew-point temperature, and the means and standard deviations for the zonal and meridional wind components and the linear (product moment) correlation coefficient between the wind components. These statistical parameters are tabulated at the station elevation and at 1 km intervals from sea level to 30 km and at 2 km intervals from 30 to 90 km altitude. The wind statistics are given at approximately 10 m above the station elevations and at altitudes with respect to mean sea level thereafter. For those range sites without rocketsonde measurements, the RRAs terminate at 30 km altitude or they are extended, if required, when rocketsonde data from a nearby launch site are available. There are four sets of tables for each of the 12 monthly reference periods and the annual reference period.

Verification of low-Mach number combustion codes using the method of manufactured solutions

NASA Astrophysics Data System (ADS)

Shunn, Lee; Ham, Frank; Knupp, Patrick; Moin, Parviz

2007-11-01

Many computational combustion models rely on tabulated constitutive relations to close the system of equations. As these reactive state-equations are typically multi-dimensional and highly non-linear, their implications on the convergence and accuracy of simulation codes are not well understood. In this presentation, the effects of tabulated state-relationships on the computational performance of low-Mach number combustion codes are explored using the method of manufactured solutions (MMS). Several MMS examples are developed and applied, progressing from simple one-dimensional configurations to problems involving higher dimensionality and solution-complexity. The manufactured solutions are implemented in two multi-physics hydrodynamics codes: CDP developed at Stanford University and FUEGO developed at Sandia National Laboratories. In addition to verifying the order-of-accuracy of the codes, the MMS problems help highlight certain robustness issues in existing variable-density flow-solvers. Strategies to overcome these issues are briefly discussed.

A Pearson VII distribution function for fast calculation of dechanneling and angular dispersion of beams

NASA Astrophysics Data System (ADS)

Shao, Lin; Peng, Luohan

2009-12-01

Although multiple scattering theories have been well developed, numerical calculation is complicated and only tabulated values have been available, which has caused inconvenience in practical use. We have found that a Pearson VII distribution function can be used to fit Lugujjo and Mayer's probability curves in describing the dechanneling phenomenon in backscattering analysis, over a wide range of disorder levels. Differentiation of the obtained function gives another function to calculate angular dispersion of the beam in the frameworks by Sigmund and Winterbon. The present work provides an easy calculation of both dechanneling probability and angular dispersion for any arbitrary combination of beam and target having a reduced thickness ⩾0.6, which can be implemented in modeling of channeling spectra. Furthermore, we used a Monte Carlo simulation program to calculate the deflection probability and compared them with previously tabulated data. A good agreement was reached.

Real-Gas Correction Factors for Hypersonic Flow Parameters in Helium

NASA Technical Reports Server (NTRS)

Erickson, Wayne D.

1960-01-01

The real-gas hypersonic flow parameters for helium have been calculated for stagnation temperatures from 0 F to 600 F and stagnation pressures up to 6,000 pounds per square inch absolute. The results of these calculations are presented in the form of simple correction factors which must be applied to the tabulated ideal-gas parameters. It has been shown that the deviations from the ideal-gas law which exist at high pressures may cause a corresponding significant error in the hypersonic flow parameters when calculated as an ideal gas. For example the ratio of the free-stream static to stagnation pressure as calculated from the thermodynamic properties of helium for a stagnation temperature of 80 F and pressure of 4,000 pounds per square inch absolute was found to be approximately 13 percent greater than that determined from the ideal-gas tabulation with a specific heat ratio of 5/3.

The Alexandria library, a quantum-chemical database of molecular properties for force field development

NASA Astrophysics Data System (ADS)

Ghahremanpour, Mohammad M.; van Maaren, Paul J.; van der Spoel, David

2018-04-01

Data quality as well as library size are crucial issues for force field development. In order to predict molecular properties in a large chemical space, the foundation to build force fields on needs to encompass a large variety of chemical compounds. The tabulated molecular physicochemical properties also need to be accurate. Due to the limited transparency in data used for development of existing force fields it is hard to establish data quality and reusability is low. This paper presents the Alexandria library as an open and freely accessible database of optimized molecular geometries, frequencies, electrostatic moments up to the hexadecupole, electrostatic potential, polarizabilities, and thermochemistry, obtained from quantum chemistry calculations for 2704 compounds. Values are tabulated and where available compared to experimental data. This library can assist systematic development and training of empirical force fields for a broad range of molecules.

Data report for the Northeast Residential Experiment Station, January 1982

NASA Astrophysics Data System (ADS)

Russell, M. C.; Raghuraman, P.; Mahoney, P. C.

1982-06-01

Physical performance data obtained from photovoltaic energy systems under test at the Northeast Residential Experiment Station(NE RES) in Concord, Massachusetts are tabulated. Five prototype residential photovoltaic systems are under test at the NE RES. Each consists of a roof mounted PV array sized to meet at least 50% of the annual electrical demand of an energy conserving house and an enclosed structure to house the remainder of the PV equipment, test instrumentation and work space. The arrays provide DC power which is converted to AC by power conditioning equipment to service all the usual loads of a residence. Each prototype system is grid connected. Another house in Carlisle, Massachusetts provided with a PV system is also being monitored. The computational basis for the data reported is given. A monthly summary tabulates the monthly performance of the PV systems and monitored houses as well as meteorological data.

NASA directory of observation station locations, volume 1

NASA Technical Reports Server (NTRS)

1973-01-01

Geodetic information for NASA tracking stations and for observation stations cooperating in NASA geodetic satellite programs is presented. A Geodetic Data Sheet is provided for each station, giving the position of the station and describing briefly how it was established. Geodetic positions and geocentric coordinates of these stations are tabulated on local or major geodetic datums and on selected world geodetic systems. The principal tracking facilities used by NASA, including the Spaceflight Tracking and Data Network, the Deep Space Network, and several large radio telescopes are discussed. Positions of these facilities are tabulated on their local or national datums, the Mercury Spheroid 1960, the Modified Mercury Datum 1968, and the Spaceflight Tracking and Data Network System. Observation stations in the NASA Geodetic Satellites Program are included along with stations participating in the National Geodetic Satellite Program. Positions of these facilities are given on local or preferred major datums, and on the Modified Mercury Datum 1968.

Modélisation macroscopique des milieux stratifiés conducteurs

NASA Astrophysics Data System (ADS)

Matagne, E.; Conard, J. Ph.

1997-11-01

Many laminated structures are recognised in Electrotechnics : magnetic cores, flat conductors windings, slotted surfaces... These structures exhibit macroscopic properties, as magnetic than electric ones. This paper shows how these characteristics can be obtained by homogenisation. It deals with linear materials but taking into account the effect of eddy currents, as well on the macroscopic magnetic permeability as on the macroscopic electric conductivity, which become then complex numbers. An example of use of the macroscopic properties is provided. On peut identifier en électrotechnique de nombreuses structures stratifiées: noyaux magnétiques, bobinages formés de conducteurs plats, surfaces encochées... Ces structures présentent des propriétés macroscopiques tant magnétiques qu'électriques. Cet article montre comment ces caractéristiques peuvent être obtenues par homogénéisation. Il se limite au cas de matériaux linéaires mais en prenant en compte l'effet des courants de Foucault aussi bien sur la perméabilité magnétique macroscopique que sur la conductivité électrique macroscopique, grandeurs qui deviennent alors des nombres complexes. Un exemple d'utilisation des caractéristiques macroscopiques est fourni.

Maximizing output power of a low-gain laser system.

PubMed

Carroll, D L; Sentman, L H

1993-07-20

Rigrod theory was used to model outcoupled power from a low-gain laser with good accuracy. For a low-gain overtone cw HF chemical laser, Rigrod theory shows that a higher medium saturation yields a higher overall overtone efficiency, but does not necessarily yield a higher measurable power (power in the bucket). For low-absorption-scattering loss overtone mirrors and a 5% penalty in outcoupled power, the intracavity flux and hence the mirror loading may be reduced by more than a factor of 2 when the gain length is long enough to saturate the medium well. For the University of Illinois at Urbana-Champaign overtone laser that has an extensive database with well-characterized mirrors for which the Rigrod parameters g(0) and I(sat) were firmly established, the accuracy to which the reflectivities of high-reflectivity overtone mirrors can be deduced by using measured mirror transmissivities, measured outcoupled power, and Rigrod theory is approximatly ±0.07%. This method of accurately deducing mirror reflectivities may be applicable to other low-gain laser systems that use high-reflectivity mirrors at different wavelengths. The maximum overtone efficiency is estimated to be approximately 80%-100%.

Conscientious objection or fear of social stigma and unawareness of ethical obligations.

PubMed

Faúndes, Anibal; Duarte, Graciana Alves; Osis, Maria José Duarte

2013-12-01

Conscientious objection is a legitimate right of physicians to reject the practice of actions that violate their ethical or moral principles. The application of that principle is being used in many countries as a justification to deny safe abortion care to women who have the legal right to have access to safe termination of pregnancy. The problem is that, often, this concept is abused by physicians who camouflage under the guise of conscientious objection their fear of experiencing discrimination and social stigma if they perform legal abortions. These colleagues seem to ignore the ethical principle that the primary conscientious duty of OB/GYNs is-at all times-to treat, or provide benefit and prevent harm to, the patients for whose care they are responsible. Any conscientious objection to treating a patient is secondary to this primary duty. One of the jobs of the FIGO Working Group for the Prevention of Unsafe Abortion is to change this paradigm and make our colleagues proud of providing legal abortion services that protect women's life and health, and concerned about disrespecting the human rights of women and professional ethical principles. Copyright © 2013 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Drift Wave Chaos and Turbulence in a LAPTAG Plasma Physics experiment

NASA Astrophysics Data System (ADS)

Katz, Cami; Gekelman, Walter; Pribyl, Patrick; Wise, Joe; Birge-Lee, Henry; Baker, Bob; Marmie, Ken; Thomas, Sam; Buckley-Bonnano, Samuel

2015-11-01

Whenever there is a pressure gradient in a magnetized plasma drift waves occur spontaneously. Drift waves have density and electrical potential fluctuations but no self magnetic field. In our experiment the drift waves form spontaneously in a narrow plasma column. (ne = 5 ×1011 cm3 , Te = 5 eV , B = 200 Gauss, dia = 25 cm , L = 1 . 5 m). As the drift waves grow from noise simple averaging techniques cannot be used to map them out in space and time. The ion saturation current Isat n√{Te} is recorded for an ensemble of 50 shots on a fixed probe located on the density gradient and for a movable probe. The probe signals are not sinusoidal and are filtered to calculate the cross-spectral function CSF = ∫ ∑ nshot Ifix, ωr->1 , tImov , ω (r->1 + δr-> , t + τ) dt , which can be used to extract the temporal and spatially varying wave patterns. The dominant wave at 18 kHz is a rotating spiral with m =2. LAPTAG is a university-high school alliance outreach program, which has been in existence for over 20 years. Work done at the BaPSF and supported by NSF/DOE.

Propulsion System Testing for the Iodine Satellite (iSAT) Demonstration Mission

NASA Technical Reports Server (NTRS)

Polzin, Kurt A.; Kamhawi, Hani

2015-01-01

CUBESATS are relatively new spacecraft platforms that are typically deployed from a launch vehicle as a secondary payload, providing low-cost access to space for a wide range of end-users. These satellites are comprised of building blocks having dimensions of 10x10x10 cm cu and a mass of 1.33 kg (a 1-U size). While providing low-cost access to space, a major operational limitation is the lack of a propulsion system that can fit within a CubeSat and is capable of executing high delta v maneuvers. This makes it difficult to use CubeSats on missions requiring certain types of maneuvers (i.e. formation flying, spacecraft rendezvous). Recently, work has been performed investigating the use of iodine as a propellant for Hall-effect thrusters (HETs) 2 that could subsequently be used to provide a high specific impulse path to CubeSat propulsion. 3, 4 Iodine stores as a dense solid at very low pressures, making it acceptable as a propellant on a secondary payload. It has exceptionally high ?Isp (density times specific impulse), making it an enabling technology for small satellite near-term applications and providing the potential for systems-level advantages over mid-term high power electric propulsion options. Iodine flow can also be thermally regulated, subliming at relatively low temperature (less than 100 C) to yield I2 vapor at or below 50 torr. At low power, the measured performance of an iodine-fed HET is very similar to that of a state-of-the-art xenon-fed thruster. Just as importantly, the current-voltage discharge characteristics of low power iodine-fed and xenon-fed thrusters are remarkably similar, potentially reducing development and qualifications costs by making it possible to use an already-qualified xenon-HET PPU in an iodine-fed system. Finally, a cold surface can be installed in a vacuum test chamber on which expended iodine propellant can deposit. In addition, the temperature doesn't have to be extremely cold to maintain a low vapor pressure in the vacuum chamber (it is under 10(exp -6) torr at -75 C), making it possible to 'cryopump' the propellant with lower-cost recirculating refrigerant-based systems as opposed to using liquid nitrogen or low temperature gaseous helium cryopanels. An iodine-based system is not without its challenges. The primary challenge is that the entire feed system must be maintained at an elevated temperature to prevent the iodine from depositing (transitioning from the gas phase directly back into the solid phase), which will block the propellant feed lines. Furthermore, deposition will occur unless the temperature in the lines is not greater than the temperature of the propellant reservoir. The flow rate can be controlled by adjusting the heating applied to the reservoir, but as with any thermal control there is a relatively slow response to changes in the heating rate. In the present paper, we describe the propulsion and propellant feed system for the iodine satellite (iSAT) flight demonstration mission. The system is based around the Busek BHT-200 Hall thruster, which has been modified for chemical compatibility with iodine vapor. While the gross propellant flow rate is maintained by the heated propellant reservoir, the flow to the anode and cathode are adjusted using two heated Vacco proportional flow control valves (PFCV), which provide very fast response on the flow rate adjustment. The flight mission design layout will be presented, showing how the system will be packaged into the overall 12-U spacecraft and the techniques being employed to protect the remaining spacecraft hardware from the propulsion system (e.g., plasma impingement, iodine deposition, thermal loads). In addition to the flight system design, results of testing the thruster and cathode with both operating on iodine propellant are presented. The tests are conducted on a thrust stand (see Fig. 1) in a large vacuum chamber containing a beam dump chilled to below -100 C to 'cryopump' the propellant. The thruster performance during these tests is presented, with these data used to evaluate the feed system and guide further refinements. Results of relatively long duration testing are presented to demonstrate the capability to operate for the length of the iSAT mission and to perform a number of re-starts as will be required by the mission concept of operations.

Accelerating molecular Monte Carlo simulations using distance and orientation dependent energy tables: tuning from atomistic accuracy to smoothed “coarse-grained” models

PubMed Central

Lettieri, S.; Zuckerman, D.M.

2011-01-01

Typically, the most time consuming part of any atomistic molecular simulation is due to the repeated calculation of distances, energies and forces between pairs of atoms. However, many molecules contain nearly rigid multi-atom groups such as rings and other conjugated moieties, whose rigidity can be exploited to significantly speed up computations. The availability of GB-scale random-access memory (RAM) offers the possibility of tabulation (pre-calculation) of distance and orientation-dependent interactions among such rigid molecular bodies. Here, we perform an investigation of this energy tabulation approach for a fluid of atomistic – but rigid – benzene molecules at standard temperature and density. In particular, using O(1) GB of RAM, we construct an energy look-up table which encompasses the full range of allowed relative positions and orientations between a pair of whole molecules. We obtain a hardware-dependent speed-up of a factor of 24-50 as compared to an ordinary (“exact”) Monte Carlo simulation and find excellent agreement between energetic and structural properties. Second, we examine the somewhat reduced fidelity of results obtained using energy tables based on much less memory use. Third, the energy table serves as a convenient platform to explore potential energy smoothing techniques, akin to coarse-graining. Simulations with smoothed tables exhibit near atomistic accuracy while increasing diffusivity. The combined speed-up in sampling from tabulation and smoothing exceeds a factor of 100. For future applications greater speed-ups can be expected for larger rigid groups, such as those found in biomolecules. PMID:22120971

Improved data illustration in complex multi-ligament knee reconstruction surgery: using the historical principles of Florence Nightingale and John Venn.

PubMed

Meyers, Paul D; McNicholas, Mike J

2008-04-01

The collection of multi-ligament knee reconstruction procedure data generates long tabulated lists of featureless abbreviations, which are often difficult to interpret and present. As demonstrated with the launch of the Scandinavian anterior cruciate ligament registries, such data are under increasing scrutiny. When developing a visual tool to improve the interpretation, presentation, and ongoing collection of data within this field, much can be learnt from the historical teachings of Florence Nightingale and John Venn. Unknown to many, Florence Nightingale was a pioneer of graphic data illustration, becoming a Fellow of the Royal Statistical Society in 1858. Further advances in the visualization of complex data relations were made by John Venn, who introduced the Venn diagram in 1880. With this background in mind, the present work has been based upon the senior author's case series of 70 patients undergoing complex knee-ligament reconstruction at Warrington Hospital, from 2001 to the present time. Although obviously not negating the need for tabulated data, the graphic representation put forward here successfully supplements featureless tabulated lists of abbreviations and can be updated easily and regularly. Providing a clear, bright illustration that is free from patient identifiers, it can be used in presentations and publications, and freely accessed by a multidisciplinary team. It assists in the identification of injury patterns, can accommodate illustration of associated factors such as meniscal injury, and clearly demonstrates each hospital's multi-ligament knee reconstruction experience. This facilitates comparison and collaboration between hospitals and promotes research.

2012 Survey of Active Duty Spouses: Tabulations of Responses

DTIC Science & Technology

2013-09-30

246 j. Attending religious/ spiritual services ................................................... 248 k. Accepting stressful...258 p. Participating in religious/ spiritual activities .......................................... 260 q. Defining the family...life .............................................................. 276 57. Seeking Spiritual Support: Constructed from Q57j, p, and s. Subfactor of

CDISC Terminology

Cancer.gov

Clinical Data Interchange Standards Consortium (CDISC) is an international, non-profit organization that develops and supports global data standards for medical research. CDISC is working actively with EVS to develop and support controlled terminology in several areas, notably CDISC's Study Data Tabulation Model (SDTM).

Statistical and operational summaries

NASA Technical Reports Server (NTRS)

Disalvo, J.

1972-01-01

Statistical progress indicator forms are presented on the financial management of the research allocations. Promotional activities, conference participants, and services are tabulated. The staffing and activity levels are also discussed, as well as the fee schedule revision and the standard interest profile offerings.

Early Yields Of Slash Pine Planted On a Cutover Site At Various Spacings

Treesearch

W.F. Mann

1971-01-01

Tabulates basal areas, cordwood and cubic-foot volumes, average d.b.h., and diameter distributions for 14-year-old slash pine planted in central Louisiana. Also gives regression equations developed to predict these parameters.

Engineering Data on Selected High Speed Passenger Trucks

DOT National Transportation Integrated Search

1978-07-01

The purpose of this project is to compile a list of high speed truck engineering parameters for characterization in dynamic performance modeling activities. Data tabulations are supplied for trucks from France, Germany, Italy, England, Japan, U.S.S.R...

INVESTIGATIONS ON BABIES AND EXPECTANT MOTHERS WITH REDUCED DOSES OF RADIOISOTOPES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hosain, F.

1960-02-01

Sensitive instruments, low-level counting devices, and short-lived isotopes are recommended for diagnostic tracer studies with radioisotopes in babies and expectant, mothers. Results are tabulated from studies using iodine131 and iron-59. (C.H.)

DOTD customer satisfaction survey frequency responses and cross-tabulations.

DOT National Transportation Integrated Search

2004-01-01

The Louisiana Department of Transportation and Development (DOTD) conducted this customer satisfaction survey to determine levels of satisfaction overall and with select components of the state maintained highway system. An A, B, C, D and F letter ga...

Motor vehicle crashes in New Zealand, 2008

DOT National Transportation Integrated Search

2009-01-01

This statistical statement contains tabulations of information coded from Traffic Crash Reports. To put these data into context, the following is a brief description of the process : which has resulted in this publication. When a road traffic crash i...

Motor vehicle crashes in New Zealand, 2009

DOT National Transportation Integrated Search

2010-01-01

This statistical statement contains tabulations of information coded from Traffic Crash Reports. To put these data into context, the following is a brief description of the process : which has resulted in this publication. When a road traffic crash i...

Myths, Misconceptions, and Realities about Public Procurement Automation.

ERIC Educational Resources Information Center

Bonner, Larry

1989-01-01

Meaningful public procurement and inventory management automation encompasses all purchasing and materials management processes, including bidder selection; bidder responsiveness tracking; preparation of bid solicitations; bid tabulation; the tracking of requisitions, bid solicitations, and deliveries; and item purchasing history reports. (MLH)

Comparability of IQ Scores on Five Widely Used Intelligence Tests

ERIC Educational Resources Information Center

Hieronymus, A. N.; Stroud, James B.

1969-01-01

Attempts to fill research gap on testing by obtaining comparisons of deviation scores, at grade levels four, seven, and ten, from the California Test of Mental Maturity, Henmon-Nelson Tests, and Lorge-Thorndike Intelligence tests. Results tabulated. (CJ)

1983-1984 nationwide personal transportation study : survey data tabulations

DOT National Transportation Integrated Search

1985-11-01

This report is part of a series that presents findings from the 1 983-1984 : Nat ionwide Personal Transportat ion S tudy (NPTS ) . This report contains : tabulat ions which relat e 1983-1984 t ravel to various demographic characterist ics.

The Use of the ’BLAKE’ Computer Program to Calculate Thermodynamic Properties of Australian-Made Gun Propellants.

DTIC Science & Technology

1982-04-01

data for gun propellants manufactured in Australia, and several which are candidates for local production, are tabulated for reference. A summary of the theoretical framework of the program is included. (Author)

South Carolina traffic collision fact book, 2006

DOT National Transportation Integrated Search

2006-01-01

In accordance with Section 56-5-1350 of the South Carolina Code of Laws, a : tabulation and analysis of collision reports has been completed for the year : 2006 as disclosed in this publication. : The number of traffic fatalities decreased from 1,093...

5 CFR 591.201 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... include Government-controlled corporations. Bureau of Labor Statistics (BLS) means the Bureau of Labor Statistics of the Department of Labor. Commonwealth of the Northern Mariana Islands (CNMI) means the....207. Detailed Expenditure Category (DEC) means the lowest level of expenditure shown in tabulated...

Tri-level study of the causes of traffic accidents, volume 2 : special analyses.

DOT National Transportation Integrated Search

1979-05-01

This final report is comprised of two volumes. Volume I provides causal result tabulations and related analyses. Volume II presents several special analysis reports dealing with driver vision knowledge, psychological make-up, etc. Human, environmenta...

Three-track runway and taxiway profiles measured at International Airports E and F

NASA Technical Reports Server (NTRS)

Hall, A. W.

1971-01-01

Three-track runway and taxiway profiles are presented for use in studies of airplane response to ground roughness. This report presents the tabulated and plotted data for two international airports (designed airports E and F).

Yield table for hardwood bark residue

Treesearch

Jeffery L. Wartluft

1974-01-01

Bark residue weights are tabulated for eight species of hardwood sawlogs according to log volume by the Doyle, International 1/4-inch, and Scribner decimal C log rules. Factors are provided for converting from weight in pounds to volume in cubic yards.

Observations of Uranus' satellites: Bibliography and literature search

NASA Technical Reports Server (NTRS)

Jacobson, R. A.

1985-01-01

A literature search has yielded more than 10,000 observations of the satellites of Uranus made from 1787 to 1985. The type (photographic, micrometer) and the number of observations are tabulated in 5 year increments and a complete bibliography is provided.

South Carolina traffic collision fact book, 2007

DOT National Transportation Integrated Search

2007-01-01

In accordance with Section 56-5-1350 of the South Carolina Code of Laws, a : tabulation and analysis of collision reports has been completed for the year : 2007 as disclosed in this publication. : The number of traffic fatalities increased from 1,044...

Three-track runway and taxiway profiles measured at international airports G and H

NASA Technical Reports Server (NTRS)

Hall, A. W.

1972-01-01

Three-track runway and taxiway profiles are presented for use in studies of airplane response to ground roughness. This report presents the tabulated and plotted data for two international airports (designated airports G and H).

Skylab medical data evaluation program (SMEDEP)

NASA Technical Reports Server (NTRS)

Hoffler, G. W.; Huntoon, C. L.; Kimzey, S. L.; Rummel, J. A.

1979-01-01

A day-by-day summary of selected data collected during the experiment is presented. The clinical and environmental data are presented in a mission-day format along with a tabulation of biomedical measurements whose values exceed three standard deviations from the preflight measurements.

The woody biomass resource of major tree taxa for the Midsouth States

Treesearch

James F. Rosson

1992-01-01

Fresh and dry biomass estimates of major trees in seven Midsouth States by forest type, ownership, species, stand basal area, tree class, diameter, and height are tabulated. Information is presented for total tree, bole, and crown components.

Ambient noise level measurements in proposed Florida airport area

DOT National Transportation Integrated Search

1972-12-31

This report documents the measurement results made at ten locations near the three remaining sites being studied for the "South Florida Regional Report." Tabulated data display a summary of the measured noise levels at each location expressed as nois...

Assessing the impact of urbanization on urban climate by remote satellite perspective: a case study in Danang city, Vietnam

NASA Astrophysics Data System (ADS)

Hoang Khanh Linh, N.; Van Chuong, H.

2015-04-01

Urban climate, one of the challenges of human being in 21 century, is known as the results of land use/cover transformation. Its characteristics are distinguished by different varieties of climatic conditions in comparison with those of less built-up areas. The alterations lead to "Urban Heat Island", in which temperature in urban places is higher than surrounding environment. This happens not only in mega cities but also in less urbanized sites. The results determine the change of land use/cover and land surface temperature in Danang city by using multi-temporal Landsat and ASTER data for the period of 1990-2009. Based on the supervised classification method of maximum likelihood algorithm, satellite images in 1990, 2003, 2009 were classified into five classes: water, forest, shrub, agriculture, barren land and built-up area. For accuracy assessment, the error metric tabulations of mapped classes and reference classes were made. The Kappa statistics, derived from error matrices, were over 80% for all of land use maps. An comparison change detection algorithm was made in three intervals, 1990-2003, 2003-2009 and 1990-2009. The results showed that built-up area increased from 8.95% to 17.87% between 1990 and 2009, while agriculture, shrub and barren decreased from 12.98% to 7.53%, 15.72% to 9.89% and 3.88% to 1.77% due to urbanization that resulted from increasing of urban population and economic development, respectively. Land surface temperature (LST) maps were retrieved from thermal infrared bands of Landsat and ASTER data. The result indicated that the temperature in study area increased from 39oC to 41oC for the period of 1990-2009. Our analysis showed that built-up area had the highest LST values, whereas water bodies had the least LST. This study is expected to be useful for decision makers to make an appropriate land use planning which can mitigate the effect to urban climate.

Remote sensing of land use/cover changes and its effect on wind erosion potential in southern Iran

PubMed Central

Sameni, Abdolmajid; Fallah Shamsi, Seyed Rashid; Bartholomeus, Harm

2016-01-01

Wind erosion is a complex process influenced by different factors. Most of these factors are stable over time, but land use/cover and land management practices are changing gradually. Therefore, this research investigates the impact of changing land use/cover and land management on wind erosion potential in southern Iran. We used remote sensing data (Landsat ETM+ and Landsat 8 imagery of 2004 and 2013) for land use/cover mapping and employed the Iran Research Institute of Forest and Rangeland (IRIFR) method to estimate changes in wind erosion potential. For an optimal mapping, the performance of different classification algorithms and input layers was tested. The amount of changes in wind erosion and land use/cover were quantified using cross-tabulation between the two years. To discriminate land use/cover related to wind erosion, the best results were obtained by combining the original spectral bands with synthetic bands and using Maximum Likelihood classification algorithm (Kappa Coefficient of 0.8 and 0.9 for Landsat ETM+ and Landsat 8, respectively). The IRIFR modelling results indicate that the wind erosion potential has increased over the last decade. The areas with a very high sediment yield potential have increased, whereas the areas with a low, medium, and high sediment yield potential decreased. The area with a very low sediment yield potential have remained constant. When comparing the change in erosion potential with land use/cover change, it is evident that soil erosion potential has increased mostly in accordance with the increase of the area of agricultural practices. The conversion of rangeland to agricultural land was a major land-use change which lead to more agricultural practices and associated soil loss. Moreover, results indicate an increase in sandification in the study area which is also a clear evidence of increasing in soil erosion. PMID:27547511

Theoretical Calculation and Validation of the Water Vapor Continuum Absorption

NASA Technical Reports Server (NTRS)

Ma, Qiancheng; Tipping, Richard H.

1998-01-01

The primary objective of this investigation is the development of an improved parameterization of the water vapor continuum absorption through the refinement and validation of our existing theoretical formalism. The chief advantage of our approach is the self-consistent, first principles, basis of the formalism which allows us to predict the frequency, temperature and pressure dependence of the continuum absorption as well as provide insights into the physical mechanisms responsible for the continuum absorption. Moreover, our approach is such that the calculated continuum absorption can be easily incorporated into satellite retrieval algorithms and climate models. Accurate determination of the water vapor continuum is essential for the next generation of retrieval algorithms which propose to use the combined constraints of multispectral measurements such as those under development for EOS data analysis (e.g., retrieval algorithms based on MODIS and AIRS measurements); current Pathfinder activities which seek to use the combined constraints of infrared and microwave (e.g., HIRS and MSU) measurements to improve temperature and water profile retrievals, and field campaigns which seek to reconcile spectrally-resolved and broad-band measurements such as those obtained as part of FIRE. Current widely used continuum treatments have been shown to produce spectrally dependent errors, with the magnitude of the error dependent on temperature and abundance which produces errors with a seasonal and latitude dependence. Translated into flux, current water vapor continuum parameterizations produce flux errors of order 10 W/sq m, which compared to the 4 W/sq m magnitude of the greenhouse gas forcing and the 1-2 W/sq m estimated aerosol forcing is certainly climatologically significant and unacceptably large. While it is possible to tune the empirical formalisms, the paucity of laboratory measurements, especially at temperatures of interest for atmospheric applications, preclude tuning, the empirical continuum models over the full spectral range of interest for remote sensing and climate applications. Thus, we propose to further develop and refine our existing, far-wing formalism to provide an improved treatment applicable from the near-infrared through the microwave. Based on the results of this investigation, we will provide to the remote sensing/climate modeling community a practical and accurate tabulation of the continuum absorption covering the near-infrared through the microwave region of the spectrum for the range of temperatures and pressures of interest for atmospheric applications.

Theoretical Calculation and Validation of the Water Vapor Continuum Absorption

NASA Technical Reports Server (NTRS)

Ma, Qiancheng; Tipping, Richard H.

1998-01-01

The primary objective of this investigation is the development of an improved parameterization of the water vapor continuum absorption through the refinement and validation of our existing theoretical formalism. The chief advantage of our approach is the self-consistent, first principles, basis of the formalism which allows us to predict the frequency, temperature and pressure dependence of the continuum absorption as well as provide insights into the physical mechanisms responsible for the continuum absorption. Moreover, our approach is such that the calculated continuum absorption can be easily incorporated into satellite retrieval algorithms and climate models. Accurate determination of the water vapor continuum is essential for the next generation of retrieval algorithms which propose to use the combined constraints of multi-spectral measurements such as those under development for EOS data analysis (e.g., retrieval algorithms based on MODIS and AIRS measurements); current Pathfinder activities which seek to use the combined constraints of infrared and microwave (e.g., HIRS and MSU) measurements to improve temperature and water profile retrievals, and field campaigns which seek to reconcile spectrally-resolved and broad-band measurements such as those obtained as part of FIRE. Current widely used continuum treatments have been shown to produce spectrally dependent errors, with the magnitude of the error dependent on temperature and abundance which produces errors with a seasonal and latitude dependence. Translated into flux, current water vapor continuum parameterizations produce flux errors of order 10 W/ml, which compared to the 4 W/m' magnitude of the greenhouse gas forcing and the 1-2 W/m' estimated aerosol forcing is certainly climatologically significant and unacceptably large. While it is possible to tune the empirical formalisms, the paucity of laboratory measurements, especially at temperatures of interest for atmospheric applications, preclude tuning the empirical continuum models over the full spectral range of interest for remote sensing and climate applications. Thus, we propose to further develop and refine our existing far-wing formalism to provide an improved treatment applicable from the near-infrared through the microwave. Based on the results of this investigation, we will provide to the remote sensing/climate modeling community a practical and accurate tabulation of the continuum absorption covering the near-infrared through the microwave region of the spectrum for the range of temperatures and pressures of interest for atmospheric applications.

Monthly motor fuel reported by states : November 2007

DOT National Transportation Integrated Search

2008-04-10

The gasoline volume shown in this report is a cumulative tabulation of gross volume reported by wholesale distributors to : State motor fuel tax agencies. It includes highway use, nonhighway use and losses. There is a lag of up to 6 weeks : between t...

Upper Kalamazoo watershed land cover inventory. [based on remote sensing

NASA Technical Reports Server (NTRS)

Richason, B., III; Enslin, W.

1973-01-01

Approximately 1000 square miles of the eastern portion of the watershed were inventoried based on remote sensing imagery. The classification scheme, imagery and interpretation procedures, and a cost analysis are discussed. The distributions of land cover within the area are tabulated.

46 CFR 62.35-50 - Tabulated monitoring and safety control requirements for specific systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) (9) Remote/auto fill level High Auto trip or overflow arrangement Hi. press. leakage level High Bilge... CL.3 W.T. doors Open/closed Fire detection Machinery spaces Space on fire (9) Fire main Pressure Low...

Monthly motor fuel reported by states : July 2007

DOT National Transportation Integrated Search

2007-12-06

The gasoline volume shown in this report is a cumulative tabulation of gross volume reported by wholesale distributors to : State motor fuel tax agencies. It includes highway use, nonhighway use and losses. There is a lag of up to 6 weeks : between t...

Monthly motor fuel reported by states : October 2007

DOT National Transportation Integrated Search

2008-02-14

The gasoline volume shown in this report is a cumulative tabulation of gross volume reported by wholesale distributors to : State motor fuel tax agencies. It includes highway use, nonhighway use and losses. There is a lag of up to 6 weeks : between t...

Monthly motor fuel reported by states : September 2007

DOT National Transportation Integrated Search

2008-01-16

The gasoline volume shown in this report is a cumulative tabulation of gross volume reported by wholesale distributors to : State motor fuel tax agencies. It includes highway use, nonhighway use and losses. There is a lag of up to 6 weeks : between t...

Monthly motor fuel reported by states : August 2007

DOT National Transportation Integrated Search

2007-12-26

Based on reports of 31 Entities, gasoline consumption for January - August 2007 changed by 0.5 percent compared to the same period in 2006. The gasoline volume shown in this report is a cumulative tabulation of gross volume reported by wholesale dist...

Highway Safety Information System guidebook for the Utah state data files. Volume 2 : single variable tabulations

DOT National Transportation Integrated Search

1996-07-01

The increasingly sophisticated demands placed on transportation planning models by the 1990 Clean Air Act Amendments (CAAA), the 1991 Intermodal Surface Transportation Efficiency Act (ISTEA), and to a lesser extent some earlier legislation, have led ...

Computerized Drug Information Services

ERIC Educational Resources Information Center

And Others; Smith, Daniel R.

1972-01-01

To compare computerized services in chemistry, pharmacology, toxicology, and clinical medicine of pharmaceutical interest, equivalent profiles were run on magnetic tape files of CA-Condensates," CBAC," Excerpta Medica," MEDLARS" and Ringdoc." The results are tabulated for overlap of services, relative speed of citing references, and unique…

Drinking-driving attitudes: a survey of Fairfax County.

DOT National Transportation Integrated Search

1973-01-01

The objective of this study was to gather and tabulate baseline data on selected attitudes and opinions held by the public of Fairfax County, Virginia. The study was designed to assist the program of the Alcohol Safety Action Project, currently in op...

Service Academy 2006 Gender Relations Survey: Tabulations of Responses

DTIC Science & Technology

2006-07-01

with you without your consent .....56 c. Someone repeatedly showed you pornographic materials, even after you asked him/her not to...harassment, sexual assault, or neither? Assume the behaviors were offensive and harmful to you. c. Someone repeatedly showed you pornographic materials

Datagram: Results of the NRMP for 1983.

ERIC Educational Resources Information Center

Graettinger, John S.

1983-01-01

Results of the National Resident Matching Program are discussed, including changes in enrollment, withdrawal, and matching patterns, data on foreign medical graduates, ratio of positions per applicant, specialization patterns, and program participation. Tabulations for each specialty are presented in numerical and percentage forms. (MSE)

SSMILES.

ERIC Educational Resources Information Center

Sunal, Dennis W., Ed.; Tracy, Dyanne M., Ed.

1993-01-01

Describes an activity in which the students utilize the mathematics concepts of ratio, proportion, and data tabulation to examine the relationship between air pressure, temperature, and humidity. Students learn to approximate partial pressure by using humidity and temperature readings and by interpolating from the vapor pressure-temperature table.…

State Higher Education Appropriations, 1996-97.

ERIC Educational Resources Information Center

Hines, Edward R.; Higham, J. Russell, III

This report tabulates state funding for higher education, comparing 1996-97 and 1995-96 appropriations. It reviews recent trends, fiscal pressures, political realities, reallocation, restructuring, and reorganizations. Among the report's conclusions is that current financing constraints are reflections of fundamental changes in the structure of…

A Temperature-Dependent, Linearly Interpolable, Tabulated Cross Section Library Based on ENDF/B-VI, Release 7.

DOE Office of Scientific and Technical Information (OSTI.GOV)

CULLEN, D. E.

2001-06-13

Version 00 As distributed, the original evaluated data include cross sections represented in the form of a combination of resonance parameters and/or tabulated energy dependent cross sections, nominally at 0 Kelvin temperature. For use in applications, these ENDF/B-VI, Release 7 data were processed into the form of temperature dependent cross sections at eight temperatures between 0 and 2100 Kelvin, in steps of 300 Kelvin. At each temperature the cross sections are tabulated and linearly interpolable in energy. POINT2000 contains all of the evaluations in the ENDF/B-VI general purpose library, which contains evaluations for 324 materials (isotopes or naturally occurring elementalmore » mixtures of isotopes). No special purpose ENDF/B-VI libraries, such as fission products, thermal scattering, photon interaction data are included. The majority of these evaluations are complete, in the sense that they include all cross sections over the energy range 10-5 eV to at least 20 MeV. However, the following are only partial evaluations that either only contain single reactions and no total cross section (Mg24, K41, Ti46, Ti47, Ti48, Ti50 and Ni59), or do not include energy dependent cross sections above the resonance region (Ar40, Mo92, Mo98, Mo100, In115, Sn120, Sn122 and Sn124). The CCC-638/TART96 code package will soon be updated to TART2000, which is recommended for use with these data. Codes within TART2000 can be used to display these data or to run calculations using these data.« less

Ab Initio Calculations of Water Line Strengths

NASA Technical Reports Server (NTRS)

Schwenke, David W.; Partridge, Harry

1998-01-01

We report on the determination of a high quality ab initiu potential energy surface (PES) and dipole moment function for water. This PES is empirically adjusted to improve the agreement between the computed line positions and those from the HITRAN 92 data base with J less than 6 for H2O. The changes in the PES are small, nonetheless including an estimate of core (oxygen 1s) electron correlation greatly improves the agreement with experiment. Using this adjusted PES, we can match 30,092 of the 30,117 transitions in the HITRAN 96 data base for H2O with theoretical lines. The 10,25,50,75, and 90 percentiles of the difference between the calculated and tabulated line positions are -0.11, -0.04, -0.01, 0.02, and 0.07 l/cm. Non-adiabatic effects are not explicitly included. About 3% of the tabulated line positions appear to be incorrect. Similar agreement using this adjusted PES is obtained for the oxygen 17 and oxygen 18 isotopes. For HDO, the agreement is not as good, with root-mean-square error of 0.25 l/cm for lines with J less than 6. This error is reduced to 0.02 l/cm by including a small asymmetric correction to the PES, which is parameterized by simultaneously fitting to HDO md D2O data. Scaling this correction by mass factors yields good results for T2O and HTO. The intensities summed over vibrational bands are usually in good agreement between the calculations and the tabulated results, but individual lines strengths can differ greatly. A high temperature list consisting of 307,721,352 lines is generated for H2O using our PES and dipole moment function.

Occupational mortality and cancer analysis.

PubMed

Lynge, E

The 1970-census populations have been followed up for deaths and emigrations in the ten-year period 1970-80 in all the Nordic countries. The data show more than a 2-fold difference in overall mortality between the low-risk group of men with pedagogical work and the high-risk group of deck and engine crew workers. These data files have also been supplemented with cancer register records. In Denmark this combined data set has been used in four different ways. First, in order to check the validity of the register, classic associations known from in-depth epidemiological studies were tabulated. Examples are cancer of the lip in farmers and fishermen, where the standardized incidence ratio (SIR) values were 1.85 and 3.17, respectively, and cancer of the nasal cavities and sinuses in skilled furniture makers, SIR = 12.25. Second, a social cancer map was produced by tabulating the cancer incidence by 20 socioeconomic groups. The social gradient was steepest for certain rare cancers related to specific etiologic factors. The social gradient also varied across cancer sites. Third, the register was used as a library for elucidation of newly reported associations. An association confirmed in the Danish data is an excess risk of bladder cancer in hairdressers, SIR = 2.05. An unconfirmed example is an excess risk of malignant melanoma in the printing industry, where Danish data show an SIR of 0.95. Fourth, a systematic tabulation of each cancer diagnosis across detailed occupational groups may lead to identification of previously unknown associations. This procedure is illustrated using cancer of the larynx as an example. Smiths, mechanics, foremen, and shop owners of engineering works and workshops all have an excess risk of laryngeal cancer, SIR = 1.63.

Poster — Thur Eve — 20: CTDI Measurements using a Radiochromic Film-based clinical protocol

DOE Office of Scientific and Technical Information (OSTI.GOV)

Quintero, C.; Bekerat, H.; DeBlois, F.

2014-08-15

The purpose of the study was evaluating accuracy and reproducibility of a radiochromic film-based protocol to measure computer tomography dose index (CTDI) as a part of annual QA on CT scanners and kV-CBCT systems attached to linear accelerators. Energy dependence of Gafchromic XR-QA2 ® film model was tested over imaging beam qualities (50 – 140 kVp). Film pieces were irradiated in air to known values of air-kerma (up to 10 cGy). Calibration curves for each beam quality were created (Film reflectance change Vs. Air-kerma in air). Film responses for same air-kerma values were compared. Film strips were placed into holesmore » of a CTDI phantom and irradiated for several clinical scanning protocols. Film reflectance change was converted into dose to water and used to calculate CTDIvol values. Measured and tabulated CTDIvol values were compared. Average variations of ±5.2% in the mean film reflectance change were observed in the energy range of 80 to 140 keV, and 11.1% between 50 and 140 keV. Measured CTDI values were in average 10% lower than tabulated CTDI values for CT-simulators, and 44% higher for CBCT systems. Results presented a mean variation for the same machine and protocol of 2.6%. Variation of film response is within ±5% resulting in ±15% systematic error in dose estimation if a single calibration curve is used. Relatively large discrepancy between measured and tabulated CTDI values strongly support the trend towards replacing CTDI value with equilibrium dose measurement in the center of cylindrical phantom, as suggested by TG- 111.« less

Using Tabulated Experimental Data to Drive an Orthotropic Elasto-Plastic Three-Dimensional Model for Impact Analysis

NASA Technical Reports Server (NTRS)

Hoffarth, C.; Khaled, B.; Rajan, S. D.; Goldberg, R.; Carney, K.; DuBois, P.; Blankenhorn, Gunther

2016-01-01

An orthotropic elasto-plastic-damage three-dimensional model with tabulated input has been developed to analyze the impact response of composite materials. The theory has been implemented as MAT 213 into a tailored version of LS-DYNA being developed under a joint effort of the FAA and NASA and has the following features: (a) the theory addresses any composite architecture that can be experimentally characterized as an orthotropic material and includes rate and temperature sensitivities, (b) the formulation is applicable for solid as well as shell element implementations and utilizes input data in a tabulated form directly from processed experimental data, (c) deformation and damage mechanics are both accounted for within the material model, (d) failure criteria are established that are functions of strain and damage parameters, and mesh size dependence is included, and (e) the theory can be efficiently implemented into a commercial code for both sequential and parallel executions. The salient features of the theory as implemented in LS-DYNA are illustrated using a widely used composite - the T800S/3900-2B[P2352W-19] BMS8-276 Rev-H-Unitape fiber/resin unidirectional composite. First, the experimental tests to characterize the deformation, damage and failure parameters in the material behavior are discussed. Second, the MAT213 input model and implementation details are presented with particular attention given to procedures that have been incorporated to ensure that the yield surfaces in the rate and temperature dependent plasticity model are convex. Finally, the paper concludes with a validation test designed to test the stability, accuracy and efficiency of the implemented model.

Analysis of Proportional Integral and Optimized Proportional Integral Controllers for Resistance Spot Welding System (RSWS) - A Performance Perspective

NASA Astrophysics Data System (ADS)

Rama Subbanna, S.; Suryakalavathi, M., Dr.

2017-08-01

This paper is an attempt to accomplish a performance analysis of the different control techniques on spikes reduction method applied on the medium frequency transformer based DC spot welding system. Spike reduction is an important factor to be considered while spot welding systems are concerned. During normal RSWS operation welding transformer’s magnetic core can become saturated due to the unbalanced resistances of both transformer secondary windings and different characteristics of output rectifier diodes, which causes current spikes and over-current protection switch-off of the entire system. The current control technique is a piecewise linear control technique that is inspired from the DC-DC converter control algorithms to register a novel spike reduction method in the MFDC spot welding applications. Two controllers that were used for the spike reduction portion of the overall applications involve the traditional PI controller and Optimized PI controller. Care is taken such that the current control technique would maintain a reduced spikes in the primary current of the transformer while it reduces the Total Harmonic Distortion. The performance parameter that is involved in the spikes reduction technique is the THD, Percentage of current spike reduction for both techniques. Matlab/SimulinkTM based simulation is carried out for the MFDC RSWS with KW and results are tabulated for the PI and Optimized PI controllers and a tradeoff analysis is carried out.

Monthly motor fuel reported by states : June 2007

DOT National Transportation Integrated Search

2007-10-22

The gasoline volume shown in this report is a cumulative tabulation of gross volume reported by wholesale distributors to State motor fuel tax agencies. It includes highway use, nonhighway use and losses. There is a lag of up to 6 weeks between the w...

Children of Migrant Farm Work Families Are at High Risk for Maltreatment: New York State Study.

ERIC Educational Resources Information Center

Alvarez, William F.; And Others

1988-01-01

Cross-tabulation of 1982 census data indicates a higher incidence of child abuse and neglect for migrant children than for children in the state as a whole. Maltreatment rates varied by migrant status and household composition. (FMW)

Monthly motor fuel reported by states : May 2007

DOT National Transportation Integrated Search

2007-09-18

The gasoline volume shown in this report is a cumulative tabulation of gross volume reported by wholesale distributors to State motor fuel tax agencies. It includes highway use, non-highway use and losses. There is a lag of up to 6 weeks between the ...

Annual Survey of Optometric Educational Institutions, 1984-85.

ERIC Educational Resources Information Center

Journal of Optometric Education, 1986

1986-01-01

Tabulations include entering class grade point averages and educational backgrounds, loan and non-loan student financial aid granted by the institutions, resident and nonresident student expenses, full-time male and female enrollment in each class, and minority student enrollment in colleges of optometry. (MSE)

Profile of Pacific Higher Education.

ERIC Educational Resources Information Center

Research and Development Cadre, Honolulu, HI.

Comparative data concerning institutions of higher education in the Pacific Islands are tabulated and summarized to aid in program planning, development, and implementation in that region. The jurisdictions covered are: American Samoa; Palau; the Northern Mariana Islands; Micronesia; Kosrae; Pohnpei; Truk; Yap; Guam; Hawaii; and the Marshall…

Voice data entry in air traffic control

NASA Technical Reports Server (NTRS)

Connolly, Donald W.

1977-01-01

Several of the keyboard data languages were tabulated and analyzed. The key language chosen as a test vehicle was that used by the nonradar or flight data controllers. This application was undertaken to minimize effort in a cost efficient way and with less research and development.

77 FR 33120 - Truth in Lending (Regulation Z)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-05

... FHFA's release of historical data on loan volumes and delinquency rates, including any tabulations or... with varying characteristics and to perform other statistical analyses that may assist the Bureau in... definitions of a ``qualified mortgage.'' For example, the Bureau is examining various measures of delinquency...

Science Education Notes.

ERIC Educational Resources Information Center

School Science Review, 1979

1979-01-01

Included is information regarding: the adaptation of microcomputer materials in physics curricula; a school-industry liaison case study involving basic electronics for teachers; the use of language in science lessons; problems in teaching image-synthesis skills; and tabulated results of a questionnaire concerning a ten-year span of organic…

Ongoing data reduction, theoretical studies, and supporting research in magnetospheric physics

NASA Technical Reports Server (NTRS)

Scarf, F. L.; Greenstadt, E. W.

1982-01-01

The investigators published a very large number of space science research papers, and in almost all cases these papers involved correlative multi-spacecraft studies. A tabulation of these research papers is provided. Quarterly progress reports for the second contractual period are included.

The Nimbus 6 data catalog. Volume 7: 1 July - 31 August 1976. Data orbits 5156 - 5985

NASA Technical Reports Server (NTRS)

1977-01-01

Operations of various experiments during the reporting period are summarized. Orbital elements, data availability times, anomalies in the data, geographic location, and time of data are tabulated. Montages obtained by infrared and microwave radiometers are included.

Computer Series, 86. Bits and Pieces, 35.

ERIC Educational Resources Information Center

Moore, John W., Ed.

1987-01-01

Describes eight applications of the use of computers in teaching chemistry. Includes discussions of audio frequency measurements of heat capacity ratios, quantum mechanics, ab initio calculations, problem solving using spreadsheets, simplex optimization, faradaic impedance diagrams, and the recording and tabulation of student laboratory data. (TW)

Superordinate Shape Classification Using Natural Shape Statistics

ERIC Educational Resources Information Center

Wilder, John; Feldman, Jacob; Singh, Manish

2011-01-01

This paper investigates the classification of shapes into broad natural categories such as "animal" or "leaf". We asked whether such coarse classifications can be achieved by a simple statistical classification of the shape skeleton. We surveyed databases of natural shapes, extracting shape skeletons and tabulating their…

Analytical Chemistry Division annual progress report for period ending November 30, 1977

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lyon, W.S.

1978-03-01

Activities for the year are summarized in sections on analytical methodology, mass and mass emission spectrometry, analytical services, bio-organic analysis, nuclear and radiochemical analysis, and quality assurance and safety. Presentations of research results in publications and reports are tabulated. (JRD)

7 CFR 1160.607 - Tabulation of ballots.

Code of Federal Regulations, 2010 CFR

2010-01-01

... referendum agent shall verify the validity of all ballots cast in accordance with the instructions and... ballots cast, including the disqualified ballots, shall be ascertained. The number of ballots cast approving, the number of ballots cast disapproving, and the pounds of fluid milk products distributed during...

Monthly motor fuel reported by states : June 2008

DOT National Transportation Integrated Search

2008-10-28

The gasoline volume shown in this report is a cumulative tabulation of gross volume reported by wholesale distributors to State motor fuel tax agencies. It includes highway use, non-highway use and losses. There is a lag of up to 6 weeks between the ...

Hydrocarbon Spectral Database

National Institute of Standards and Technology Data Gateway

SRD 115 Hydrocarbon Spectral Database (Web, free access)   All of the rotational spectral lines observed and reported in the open literature for 91 hydrocarbon molecules have been tabulated. The isotopic molecular species, assigned quantum numbers, observed frequency, estimated measurement uncertainty and reference are given for each transition reported.

Diatomic Spectral Database

National Institute of Standards and Technology Data Gateway

SRD 114 Diatomic Spectral Database (Web, free access)   All of the rotational spectral lines observed and reported in the open literature for 121 diatomic molecules have been tabulated. The isotopic molecular species, assigned quantum numbers, observed frequency, estimated measurement uncertainty, and reference are given for each transition reported.

Triatomic Spectral Database

National Institute of Standards and Technology Data Gateway

SRD 117 Triatomic Spectral Database (Web, free access)   All of the rotational spectral lines observed and reported in the open literature for 55 triatomic molecules have been tabulated. The isotopic molecular species, assigned quantum numbers, observed frequency, estimated measurement uncertainty and reference are given for each transition reported.

Water-quality data (July 1986 through September 1987) and statistical summaries (March 1985 through September 1987) for the Clark Fork and selected tributaries from Deer Lodge to Missoula, Montana

USGS Publications Warehouse

Lambing, J.H.

1988-01-01

Water quality sampling was conducted at seven sites on the Clark Fork and selected tributaries from Deer Lodge to Missoula, Montana, from July 1986 through September 1987. This report presents tabulations and statistical summaries of the water quality data. The data presented in this report supplement previous data collected from March 1985 through June 1986 for six of the seven sites. Included in this report are tabulations of instantaneous values of streamflow, onsite water quality, hardness, and concentrations of trace elements and suspended sediment for periodic samples. Also included are tables and hydrographs of daily mean values for streamflow, suspended-sediment concentration, and suspended-sediment discharge at three mainstream stations and one tributary. Statistical summaries are presented for periodic water quality data collected from March 1986 through September 1987. Selected data are illustrated by graphs showing median concentrations to suspended-sediment concentrations, and median concentrations of trace elements in suspended sediment. (USGS)

Thermodynamic tabulations for selected phases in the system CaO-Al2O3-SiO2-H2 at 101.325 kPa (1 atm) between 273.15 and 1800 K

USGS Publications Warehouse

Haas, John L.; Robinson, Glipin R.; Hemingway, Bruch S.

1981-01-01

The standard thermodynamic properties of phases in the lime‐alumina‐silica‐ water system between 273.15 and 1800 K at 101.325 kPa (1 atm) were evalated from published experimental data. Phases included in the compilation are boehmite, diaspore, gibbsite, kaolinite, dickite, halloysite, andalusite, kyanite, sillimanite, Ca‐Al cliniopyroxene, anorthite, gehlenite, grossular, prehnite, zoisite, margarite, wollastonite, cyclowollastonite ( = pseudowollastonite), larnite, Ca olivine, hatrurite, and rankinite. The properties include heat capacity, entropy, relative enthalpy, and the Gibbs energy function of the phases and the enthalpies, Gibbs energies, and equilibrium constants for formation both from the elements and the oxides. Tabulated values are given at 50 K intervals with the 2‐sigma confidence limit at 250 K intervals. Summaries for each phase give the temperature‐ dependent functions for heat capacity, entropy, and relative enthalpy and the experimental data used in the final evaluation.

Measurement of Lα and Lβ1,3,4 fluorescence cross sections of La, Ce, Pr and Nd induced by photons of energies between 7.01 keV and 8.75 keV

NASA Astrophysics Data System (ADS)

Reyes-Herrera, J.; Miranda, J.

2016-06-01

This study presents measurement results of x-ray production cross sections of Lα and Lβ1,3,4 emitted by four lanthanoid elements (La, Ce, Pr and Nd), after irradiation with Kα and Kβ X rays of the elements Co, Ni, Cu, and Zn (covering energies between 7.01 keV and 8.75 keV). Primary x-rays were induced in turn by the irradiation of thick targets of these elements with a beam of x-rays produced by a tube with an Rh anode, operating at 50 kV and 850 μA. The experimental results are compared with theoretical cross sections predicted using known tabulations of photoelectric cross sections. Dirac-Hartree-Slater (DHS) atomic parameters were used for these calculations. An acceptable match between experiment and both sets of tabulated data is found.

Comparing in Cylinder Pressure Modelling of a DI Diesel Engine Fuelled on Alternative Fuel Using Two Tabulated Chemistry Approaches

PubMed Central

Ngayihi Abbe, Claude Valery; Nzengwa, Robert; Danwe, Raidandi

2014-01-01

The present work presents the comparative simulation of a diesel engine fuelled on diesel fuel and biodiesel fuel. Two models, based on tabulated chemistry, were implemented for the simulation purpose and results were compared with experimental data obtained from a single cylinder diesel engine. The first model is a single zone model based on the Krieger and Bormann combustion model while the second model is a two-zone model based on Olikara and Bormann combustion model. It was shown that both models can predict well the engine's in-cylinder pressure as well as its overall performances. The second model showed a better accuracy than the first, while the first model was easier to implement and faster to compute. It was found that the first method was better suited for real time engine control and monitoring while the second one was better suited for engine design and emission prediction. PMID:27379306

CAP: A Computer Code for Generating Tabular Thermodynamic Functions from NASA Lewis Coefficients. Revised

NASA Technical Reports Server (NTRS)

Zehe, Michael J.; Gordon, Sanford; McBride, Bonnie J.

2002-01-01

For several decades the NASA Glenn Research Center has been providing a file of thermodynamic data for use in several computer programs. These data are in the form of least-squares coefficients that have been calculated from tabular thermodynamic data by means of the NASA Properties and Coefficients (PAC) program. The source thermodynamic data are obtained from the literature or from standard compilations. Most gas-phase thermodynamic functions are calculated by the authors from molecular constant data using ideal gas partition functions. The Coefficients and Properties (CAP) program described in this report permits the generation of tabulated thermodynamic functions from the NASA least-squares coefficients. CAP provides considerable flexibility in the output format, the number of temperatures to be tabulated, and the energy units of the calculated properties. This report provides a detailed description of input preparation, examples of input and output for several species, and a listing of all species in the current NASA Glenn thermodynamic data file.

CAP: A Computer Code for Generating Tabular Thermodynamic Functions from NASA Lewis Coefficients

NASA Technical Reports Server (NTRS)

Zehe, Michael J.; Gordon, Sanford; McBride, Bonnie J.

2001-01-01

For several decades the NASA Glenn Research Center has been providing a file of thermodynamic data for use in several computer programs. These data are in the form of least-squares coefficients that have been calculated from tabular thermodynamic data by means of the NASA Properties and Coefficients (PAC) program. The source thermodynamic data are obtained from the literature or from standard compilations. Most gas-phase thermodynamic functions are calculated by the authors from molecular constant data using ideal gas partition functions. The Coefficients and Properties (CAP) program described in this report permits the generation of tabulated thermodynamic functions from the NASA least-squares coefficients. CAP provides considerable flexibility in the output format, the number of temperatures to be tabulated, and the energy units of the calculated properties. This report provides a detailed description of input preparation, examples of input and output for several species, and a listing of all species in the current NASA Glenn thermodynamic data file.

Zonal and tesseral harmonic coefficients for the geopotential function, from zero to 18th order

NASA Technical Reports Server (NTRS)

Kirkpatrick, J. C.

1976-01-01

Zonal and tesseral harmonic coefficients for the geopotential function are usually tabulated in normalized form to provide immediate information as to the relative significance of the coefficients in the gravity model. The normalized form of the geopotential coefficients cannot be used for computational purposes unless the gravity model has been modified to receive them. This modification is usually not done because the absolute or unnormalized form of the coefficients can be obtained from the simple mathematical relationship that relates the two forms. This computation can be quite tedious for hand calculation, especially for the higher order terms, and can be costly in terms of storage and execution time for machine computation. In this report, zonal and tesseral harmonic coefficients for the geopotential function are tabulated in absolute or unnormalized form. The report is designed to be used as a ready reference for both hand and machine calculation to save the user time and effort.

Environmental Justice Assessment for Transportation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mills, G.S.; Neuhauser, K.S.

1999-04-05

Application of Executive Order 12898 to risk assessment of highway or rail transport of hazardous materials has proven difficult; the location and conditions affecting the propagation of a plume of hazardous material released in a potential accident are unknown, in general. Therefore, analyses have only been possible in geographically broad or approximate manner. The advent of geographic information systems and development of software enhancements at Sandia National Laboratories have made kilometer-by-kilometer analysis of populations tallied by U.S. Census Blocks along entire routes practicable. Tabulations of total, or racially/ethnically distinct, populations close to a route, its alternatives, or the broader surroundingmore » area, can then be compared and differences evaluated statistically. This paper presents methods of comparing populations and their racial/ethnic compositions using simple tabulations, histograms and Chi Squared tests for statistical significance of differences found. Two examples of these methods are presented: comparison of two routes and comparison of a route with its surroundings.« less

Higher-order triangular spectral element method with optimized cubature points for seismic wavefield modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Youshan, E-mail: ysliu@mail.iggcas.ac.cn; Teng, Jiwen, E-mail: jwteng@mail.iggcas.ac.cn; Xu, Tao, E-mail: xutao@mail.iggcas.ac.cn

2017-05-01

The mass-lumped method avoids the cost of inverting the mass matrix and simultaneously maintains spatial accuracy by adopting additional interior integration points, known as cubature points. To date, such points are only known analytically in tensor domains, such as quadrilateral or hexahedral elements. Thus, the diagonal-mass-matrix spectral element method (SEM) in non-tensor domains always relies on numerically computed interpolation points or quadrature points. However, only the cubature points for degrees 1 to 6 are known, which is the reason that we have developed a p-norm-based optimization algorithm to obtain higher-order cubature points. In this way, we obtain and tabulate newmore » cubature points with all positive integration weights for degrees 7 to 9. The dispersion analysis illustrates that the dispersion relation determined from the new optimized cubature points is comparable to that of the mass and stiffness matrices obtained by exact integration. Simultaneously, the Lebesgue constant for the new optimized cubature points indicates its surprisingly good interpolation properties. As a result, such points provide both good interpolation properties and integration accuracy. The Courant–Friedrichs–Lewy (CFL) numbers are tabulated for the conventional Fekete-based triangular spectral element (TSEM), the TSEM with exact integration, and the optimized cubature-based TSEM (OTSEM). A complementary study demonstrates the spectral convergence of the OTSEM. A numerical example conducted on a half-space model demonstrates that the OTSEM improves the accuracy by approximately one order of magnitude compared to the conventional Fekete-based TSEM. In particular, the accuracy of the 7th-order OTSEM is even higher than that of the 14th-order Fekete-based TSEM. Furthermore, the OTSEM produces a result that can compete in accuracy with the quadrilateral SEM (QSEM). The high accuracy of the OTSEM is also tested with a non-flat topography model. In terms of computational efficiency, the OTSEM is more efficient than the Fekete-based TSEM, although it is slightly costlier than the QSEM when a comparable numerical accuracy is required. - Highlights: • Higher-order cubature points for degrees 7 to 9 are developed. • The effects of quadrature rule on the mass and stiffness matrices has been conducted. • The cubature points have always positive integration weights. • Freeing from the inversion of a wide bandwidth mass matrix. • The accuracy of the TSEM has been improved in about one order of magnitude.« less

Asteroid selection for mission opportunities. Appendix: Asteroid data sheets

NASA Technical Reports Server (NTRS)

1972-01-01

The characteristics of asteroids selected as possible space mission objectives are presented. The asteroids are described according to: (1) magnitude, (2) spectral reflectivity; (3) phase factors, (4) polarization, (5) light curve, and (6) physical parameters. The data are tabulated on specific formats for each asteroid considered.

Tables of the coefficients A

NASA Technical Reports Server (NTRS)

Chandra, N.

1974-01-01

Numerical coefficients required to express the angular distribution for the rotationally elastic or inelastic scattering of electrons from a diatomic molecule were tabulated for the case of nitrogen and in the energy range from 0.20 eV to 10.0 eV. Five different rotational states are considered.

Tri-level study of the causes of traffic accidents. Volume 1, Causal factor tabulations and assessments

DOT National Transportation Integrated Search

1977-03-31

This is the Final Report of the "Tri-Level Study of the Causes of Traffic Accidents," performed by the Indiana University Institute for Research in Public Safety (IRPS), under contract to the National Highway Traffic Safety Administration (Contract N...

Career Opportunities in Chemistry and Chemical Engineering.

ERIC Educational Resources Information Center

Glover, Trienne

This pamphlet discusses career and employment opportunities in chemical engineering. Necessary college preparation is described and median salaries by degree are tabulated. Nontraditional careers in chemistry are also described. Future demand for chemists and chemical engineers is projected to 1985 and the availability of jobs for women and…

Highway Safety Information System guidebook for the California state data files. Volume 2 : single variable tabulations

DOT National Transportation Integrated Search

1996-09-01

The United States and many other advanced industrial countries are concerned about the slow down in productivity growth since the early 1970s. Recent discussions in the literature have emphasized inadequate growth of infrastructure capital as a cause...

Highway Safety Information System guidebook for the Maine state data files. Volume 2 : single variable tabulations

DOT National Transportation Integrated Search

2012-10-01

The United States and European Union (EU) share many of the same transportation research issues, challenges, and goals. They also share a belief that cooperative vehicle (also termed connected vehicle) systems, based on vehicle-to-vehicle and vehicle...

Emergency and Transitional Shelter Population: 2000. Census 2000 Special Reports.

ERIC Educational Resources Information Center

Smith, Annetta C.; Smith, Denise I.

This report presents tabulations from Census 2000 data on people enumerated at emergency and transitional shelters. This includes shelters for people experiencing homelessness; shelters for children who are runaways, neglected, or without conventional housing; transitional shelters for people without conventional housing; and hotels and motels…

28 CFR 16.208 - Annual report.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 28 Judicial Administration 1 2012-07-01 2012-07-01 false Annual report. 16.208 Section 16.208... Observation of Parole Commission Meetings § 16.208 Annual report. The Commission shall report annually to Congress regarding its compliance with Sunshine Act requirements, including a tabulation of the total...

28 CFR 16.208 - Annual report.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 28 Judicial Administration 1 2011-07-01 2011-07-01 false Annual report. 16.208 Section 16.208... Observation of Parole Commission Meetings § 16.208 Annual report. The Commission shall report annually to Congress regarding its compliance with Sunshine Act requirements, including a tabulation of the total...

28 CFR 16.208 - Annual report.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Annual report. 16.208 Section 16.208... Observation of Parole Commission Meetings § 16.208 Annual report. The Commission shall report annually to Congress regarding its compliance with Sunshine Act requirements, including a tabulation of the total...

28 CFR 16.208 - Annual report.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 28 Judicial Administration 1 2014-07-01 2014-07-01 false Annual report. 16.208 Section 16.208... Observation of Parole Commission Meetings § 16.208 Annual report. The Commission shall report annually to Congress regarding its compliance with Sunshine Act requirements, including a tabulation of the total...

Design study for electronic system for Jupiter Orbit Probe (JOP)

NASA Technical Reports Server (NTRS)

Elero, B. P., Jr.; Carignan, G. R.

1978-01-01

The conceptual design of the Jupiter probe spectrometer is presented. Block and circuit diagrams are presented along with tabulated parts lists. Problem areas are considered to be (1) the schedule, (2) weight limitations for the electronic systems, and (3) radiation hardness of the electronic devices.

Comparing the Ideal Dispositions of Administrative Internship Candidates

ERIC Educational Resources Information Center

Brown, Sidney L.

2015-01-01

This research will examine the dispositions of Instructional Leader Residents/interns (ILR/I's) at a State Department of Education (SDE) mandated redesigned masters principal preparation program at a Predominantly White Institution (PWI). Once the dispositions' findings were tabulated they were compared with the dispositions findings of…

The Farmworker in the U.S.: A Profile.

ERIC Educational Resources Information Center

Colorado Migrant Council, Denver.

Social, economic, educational, and attitudinal data concerning migrant and seasonal farmworkers in 16 states were obtained through personal interviews from January 1978 through February 1979. Responses involving about 84,000 individuals were tabulated for use in program planning, administration, and funding. Data from interviews conducted in the…

REVIEW OF THE ATTRIBUTES AND PERFORMANCE OF SIX URBAN DIFFUSION MODELS

EPA Science Inventory

The American Meteorological Society conducted a scientific review of a set of six urban diffusion models. TRC Environmental Consultants, Inc. calculated and tabulated a uniform set of statistics for all the models. The report consists of a summary and copies of the three independ...

Space station program phase B definition: Nuclear reactor-powered space station cost and schedules

NASA Technical Reports Server (NTRS)

1971-01-01

Tabulated data are presented on the costs, schedules, and technical characteristics for the space station phases C and D program. The work breakdown structure, schedule data, program ground rules, program costs, cost-estimating rationale, funding schedules, and supporting data are included.

2014 QuickCompass of TRICARE Child Beneficiaries: Utilization of Medicaid-Waivered Services. Tabulation of Responses

DTIC Science & Technology

2014-08-30

management) Long term care (e.g., home health care, hospice, integrated personal care, intermediate care facilities for the mentally retarded, nurse ... aide training and testing, and nursing facilities) Medical equipment (e.g., medically necessary supplies, including oxygen, catheters, and reusable

The demographic viewpoint in the vital and health statistics monographs of The American Public Health Association.

PubMed

Spiegelman, M

1966-06-01

The plan calls for monographs on 16 specific topics and a review volume. The specific topics include a monograph on fertility, another on marriage and divorce, and one on social and economic factors in mortality, all of which are of obvious demographic interest. The core of the development of the monographs dealing with the disease topics, and accidents, homicide, and suicide, is a tabulation program involving specific and age-adjusted death rates based upon the deaths in the United States for the three year period 1959-61 and the 1960 census of population. The program called for a set of standard tabulations common to each monograph and also a set of special tabulations tailored to meet the particular needs for each topic as specified by its authors. This wealth of demographic detail regarding mortality in the United States during 1959-61 fills only one aspect of its health picture. To fill out the health picture, use is being made of the great volume of morbidity data out of the National Health Interview and Examination Surveys and a wide variety of other specialized surveys. In all of these, the findings are invariably described in terms of the demographic characteristics of age and sex, and frequently in terms of such social-economic variables as education, income, work status, and occupational class.A large part of the content of the monograph on social and economic factors in mortality will come out of available results of the 1960 census-death certificate matching study at the University of Chicago. One important feature of this monograph, not contained in the Chicago study, is a regression and correlation analysis of total mortality in 202 Standard Metropolitan Statistical Areas in relation to a large number of social, economic, and climatic factors. Among the features in the monograph on fertility are chapters on the medical and biological characteristics of births, fecundity and family planning, and an analysis of cohort fertility trends. The monograph on marriage and divorce will make use of the detailed tabulations from the 1960 census on marital status in relation to education, race, parentage, earnings and other classifications of individuals and of husband and wife in married couples. It will also contain a matching study of divorce records in certain states for a short period before the census of 1960 with the returns in the census. The project is supported by a grant from the United States Public Health Service (CH 00075; formerly RG 08262). Publication will be by the Harvard University Press.

Breast-cancer-isation explored: Social experiences of gynaecological cancer in a Norwegian context.

PubMed

Solbraekke, Kari Nyheim; Lorem, Geir

2016-11-01

This article's point of departure is recent claims that breast cancer survivorship displaying positivity and self-growth represents the gold standard for all forms of cancer survivorship in English-speaking Western cultures. An interview study of Norwegian women regarding gynaecological cancer followed by hysterectomy is used to explore whether this process is taking place beyond this setting. Results show that the women's experiences of having to display survivorship in this manner are not as notable as found in English-speaking Western countries, neither is their experience of social othering. Reasons for this may be strong norms of social egalitarianism marking Norwegian culture and breast cancer informational campaigns that have not yet totally defined Norwegian norms for how to survive cancer. At the clinic and in the public sphere, however, the women experience gynaecological cancer as clearly having lower status than breast cancer, leading to a strong sense that the bodily site of their disease is taboo. Hence, as found in English-speaking cultures, the complex embodied nature of having gynaecological cancer and life beyond treatment seems to be silenced by the media and medical institutions. Finally, implications for future research and health care related to cancer survivorship are also discussed. © 2016 Foundation for the Sociology of Health & Illness.

Prenatal exposure to testosterone (2D:4D) and social hierarchy together predict voice behavior in bankers.

PubMed

Bijleveld, Erik; Baalbergen, Joost

2017-01-01

Prohibitive voice behaviors are employees' expressions of concern about practices, incidents, or behaviors that may potentially harm the organization. In this study, we examined a potential biological correlate of prohibitive voice: prenatal exposure to testosterone. In a sample of bankers, we used 2D:4D (i.e., the ratio of the length of the index finger to the length of the ring finger) as a marker for prenatal exposure to testosterone (lower 2D:4D suggests higher prenatal exposure to testosterone). We used a self-report scale to measure prohibitive voice. For low-ranked employees, lower 2D:4D was related to using less voice. No such relation was found for high-ranked employees. Conclusions should be drawn with caution, because the findings only applied to voice regarding the organization as a whole (and not to voice regarding the own team), and because of methodological limitations. However, the findings are consistent with the ideas that (a) people low in 2D:4D tend to strive to attain and maintain social status and that (b) remaining silent about perceived problems in the organization is-at least for low-ranked employees-a means to achieve this goal.

HIV-related stigma and NGO-isation in India: an historico-empirical analysis

PubMed Central

Nambiar, Devaki

2011-01-01

In response to World Bank critiques in 2007, the Indian Ministry of Health and Family Welfare declared that HIV-related stigma was a barrier to the participation of Non-Governmental Organisations (NGOs) in the implementation of HIV prevention Targeted Interventions. Taking a deeper view of HIV-related stigma as an historically inflected process of devaluation, this paper details the history and transformation of NGO involvement in the HIV epidemic from 1986 through economic liberalisation in the 1990s up to the recently concluded National AIDS Control Program (NACP II, 1999-2006). It additionally examines findings from interviews and participant observation of NGO workers (N=24) from four Targeted Intervention NGOs in Delhi funded under NACP II. Analysis reveals that a ‘second wave’ of HIV-related NGO involvement has mushroomed in the past two decades, affording NGO workers multiple pathways to credibility in the Indian response to the epidemic. Contradictions embedded in the overlap of these pathways produce stigma, reflecting ‘adverse incorporation.’ Drawing upon noteworthy exceptions to this trend from the ‘first wave’ of Indian HIV-related NGOs, the paper calls for NGO participation as an explicitly political project of addressing the social inequalities that shape stigma as well as vulnerability to illness writ large. PMID:22150236

A History of Computer Numerical Control.

ERIC Educational Resources Information Center

Haggen, Gilbert L.

Computer numerical control (CNC) has evolved from the first significant counting method--the abacus. Babbage had perhaps the greatest impact on the development of modern day computers with his analytical engine. Hollerith's functioning machine with punched cards was used in tabulating the 1890 U.S. Census. In order for computers to become a…

Problematics of different technical maintenance for computers

NASA Technical Reports Server (NTRS)

Dostalek, Z.

1977-01-01

Two modes of operations are used in the technical maintenance of computers: servicing provided by the equipment supplier, and that done by specially trained computer users. The advantages and disadvantages of both modes are discussed. Maintenance downtime is tabulated for two computers serviced by user employees over an eight year period.

2012 Workplace and Gender Relations Survey of Active Duty Members. Tabulations of Responses

DTIC Science & Technology

2013-04-01

closure on the incident .......................... k. Seek medical assistance ............................... l. Seek mental health assistance...242 k. Mental health care doesn’t work...244 l. Mental health care counseling may impact my security clearance ..... 246 GENDER-RELATED EXPERIENCES 27. During the past 12 months

Programming Errors in APL.

ERIC Educational Resources Information Center

Kearsley, Greg P.

This paper discusses and provides some preliminary data on errors in APL programming. Data were obtained by analyzing listings of 148 complete and partial APL sessions collected from student terminal rooms at the University of Alberta. Frequencies of errors for the various error messages are tabulated. The data, however, are limited because they…

12 CFR 906.5 - Monthly interest rate survey.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... The initial weights are based on lender type and lender size. The data also is weighted so that the pattern of weighted responses matches the actual pattern of mortgage originations by lender type and by region. The Finance Board tabulates the data and publishes standard data tables late in the following...

12 CFR 906.5 - Monthly interest rate survey.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... The initial weights are based on lender type and lender size. The data also is weighted so that the pattern of weighted responses matches the actual pattern of mortgage originations by lender type and by region. The Finance Board tabulates the data and publishes standard data tables late in the following...

24 CFR 248.311 - Notice of intent.

Code of Federal Regulations, 2010 CFR

2010-04-01

... the affected project, the owner shall tabulate the number and type of translations needed by the tenants and request the State agency to provide the appropriate translations. The owner shall deliver a copy of the translated notice of intent to all of the tenants who requested such a translation. The...

Parameters of Household Composition as Demographic Measures

ERIC Educational Resources Information Center

Akkerman, Abraham

2005-01-01

Cross-sectional data, such as Census statistics, enable the re-enactment of household lifecourse through the construction of the household composition matrix, a tabulation of persons in households by their age and by the age of their corresponding household-heads. Household lifecourse is represented in the household composition matrix somewhat…

The Natural Radiation Environment, Understanding the Atom Series.

ERIC Educational Resources Information Center

Kastner, Jacob

The somatic and genetic effects of naturally occurring radiation are described in this illustrated booklet. Internal sources of radiation from food, water, and air and external sources including radioisotopes in rock, brick, water, and air and cosmic radiation are tabulated. Detection methods are described, and their use in biological and physical…

Deer Browse Production: Rapid Sampling and Computer-aided Analysis

Treesearch

Forest W. Stearns; Dennis L. Schweitzer; William A. Creed

1968-01-01

Describes field techniques by which winter deer-browse production can be sampled with reasonable accuracy and moderate effort; and expedites the tabulation of the browse data. The method will be useful to both land managers and scientists doing research on the habitat of the white-tailed deer.

Using Key Performance Indicators to Drive Strategic Decision Making.

ERIC Educational Resources Information Center

Dolence, Michael G.; Norris, Donald M.

1994-01-01

A nine-step method for defining and pursuing key performance indicators (KPIs), derived from a strategic planning process, is outlined, and its applications at the University of Northern Colorado and Illinois Benedictine College are described and tabulated. A chart summarizes current and projected KPIs for Illinois Benedictine College for each…

OCLC--A Personal Network.

ERIC Educational Resources Information Center

Thompson, Dorothea M.

1985-01-01

Tabulation of an academic library's record of improved success rate and fill time for interlibrary loans utilizing the OCLC interlibrary loan subsystem supports continued use of four common-sense rules: use OCLC first; use other union lists next; select smallest nearby library; spread requests among small libraries. Twelve references are cited.…

Making One-Computer Teaching Fun!

ERIC Educational Resources Information Center

Tan, Soo Boo

1998-01-01

Most teachers face the challenge of bringing technology into classrooms with only one computer. This article describes how one computer can serve the needs of many students: connecting it to a TV or projection device to display agendas, Web sites, microscope slides and other scientific instruments, and spreadsheets; tabulate data; deliver…

Seed and Cone Insects of Southern Pines

Treesearch

Southeastern Forest Experiment Station

1980-01-01

Distribution maps are included for all insect species, providing at a glance each insect's expected southern distribution. Knowledge of some distributions is incomplete. Accordingly, the range maps should be used as general rather than absolute guides.Insect species and their pine hosts are tabulated for each of the three damage...

SCIENCE AT NOVA.

ERIC Educational Resources Information Center

Broward County Schools, Fort Lauderdale, FL.

THE SCIENCE PROGRAM AT NOVA HIGH SCHOOL IS STRUCTURED TO MEET THE NEEDS OF A SCIENTIFIC SOCIETY. THE JUNIOR HIGH PROGRAM EMPHASIZES THE ACCUMLATION, TABULATION, AND ANALYSIS OF DATA. THE SENIOR HIGH PROGRAM MAKES USE OF THESE PROCESSES IN THE INVESTIGATION OF VARIOUS SUBJECT AREAS. THE UNITS COMPOSING THE HIGH SCHOOL CURRICULUM ARE DESCRIBED. UNIT…

Highway Safety Information System guidebook for the Minnesota state data files. Volume 2 : single variable tabulations

DOT National Transportation Integrated Search

1997-12-01

In order to begin to understand the public's views regarding the transportation services it receives, as part of the pre-test of the 1995 Nationwide Personal Transportation Survey, in a national telephone survey, over 4,000 adults were asked a series...

Using Six-Sigma To Change and Measure Improvement.

ERIC Educational Resources Information Center

Feld, Karl G.; Stone, William K.

2002-01-01

Explains why Honeywell's Market Research Department replaced its traditional data collection and paper-based tabulation with blended modes, including electronic interviewing and real-time reporting. Describes how the Six-Sigma quality control process demonstrated that a hybrid approach with blended modes and Web-based reporting tools could deliver…

46 CFR 62.35-50 - Tabulated monitoring and safety control requirements for specific systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... lubrication Pressure Low Main propulsion, controllable pitch propeller Hydraulic oil Pressure High, Low... ......ditto (3) Trial for ignition Status Failure ......ditto Control power Available (pressure) Failure (low... Activated Starting power Pressure (voltage) Low Limit (2) Location in control Status Override (6) Shaft...

46 CFR 62.35-50 - Tabulated monitoring and safety control requirements for specific systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... lubrication Pressure Low Main propulsion, controllable pitch propeller Hydraulic oil Pressure High, Low... ......ditto (3) Trial for ignition Status Failure ......ditto Control power Available (pressure) Failure (low... Activated Starting power Pressure (voltage) Low Limit (2) Location in control Status Override (6) Shaft...

46 CFR 62.35-50 - Tabulated monitoring and safety control requirements for specific systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... lubrication Pressure Low Main propulsion, controllable pitch propeller Hydraulic oil Pressure High, Low... ......ditto (3) Trial for ignition Status Failure ......ditto Control power Available (pressure) Failure (low... Activated Starting power Pressure (voltage) Low Limit (2) Location in control Status Override (6) Shaft...

Cellular Consequences of Telomere Shortening in Histologically Normal Breast Tissues

DTIC Science & Technology

2013-09-01

using the open source, JAVA -based image analysis software package ImageJ (http://rsb.info.nih.gov/ij/) and a custom designed plugin (“Telometer...Tabulated data were stored in a MySQL (http://www.mysql.com) database and viewed through Microsoft Access (Microsoft Corp.). Statistical Analysis For

Voyager 2 to make closest encounter with Saturn in August

NASA Technical Reports Server (NTRS)

1981-01-01

The planned Voyager 2 Saturn mission is described. Information about Saturn obtained from the Voyager 1 encounter is summarized. Data on the satellites and rings of Saturn are tabulated. The video programming schedule for the Voyager 2 Saturn encounter is given. The Voyager science team is listed.

Schoolhouse Systems Project: SSP. 3rd Report.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee.

This brochure provides statistical bid breakdown for Programs 1A and 2 of the Florida Schoolhouse Systems Project. Tabular information is provided on bidders, compatible building subsystems, bid tabulation by compatibility, "per school" building subsystems, nominated bidders and lump sums, and a comparison of programs 1A and 2 bids. Data…

Academic Libraries: 2008. First Look. NCES 2010-348

ERIC Educational Resources Information Center

Phan, Tai; Hardesty, Laura; Sheckells, Cindy; Davis, Denise

2009-01-01

This report presents tabulations for the 2008 Academic Libraries Survey (ALS) conducted by the United States Department of Education's National Center for Education Statistics (NCES), within the Institute of Education Sciences. This First Look summarizes services, staff, collections, and expenditures of academic libraries in 2- and 4-year,…

Program Manual for Producing Weight Scaling Conversion Tables

Treesearch

Gary L. Tyre; Clyde A. Fasick; Frank M. Riley; Frank O. Lege

1973-01-01

Three computer programs are presented which can be applied by individual firms to establish a weight-scaling information system, The first generates volume estimates from truckload weights for any combination of veneer, sawmill, and pulpwood volumes. The second provides quality-control information by tabulating differences between estimated volumes and observed check-...

Off-Campus Study Centers for Federal Employees, Fiscal Year 1969.

ERIC Educational Resources Information Center

Civil Service Commission, Washington, DC. Bureau of Training.

One of three major training and educational resource publications from the Civil Service Commission, this directory provides information on individual off campus study centers for Federal Employees. Numbers of centers and participants are tabulated by agency and by state or other geographic location. Cooperating institutions, programs or course…

Off-Campus Centers for Federal Employees.

ERIC Educational Resources Information Center

Civil Service Commission, Washington, DC. Bureau of Training.

Designed to give information on off campus study centers for Federal employees, this directory tabulates the number of centers and participants by agency and by state or other geographic location, and indicates the cooperating institutions, programs or course offerings, eligibility for attendance, general items of interest, and sources of further…

Meteorological and constituent data for January and February 1981

NASA Technical Reports Server (NTRS)

1981-01-01

Balloon data consisting of a plot showing the mixing ratio of ozone partial pressure in micromillibors and temperature in degrees centigrade versus pressure altitude in millibars is presented. An accompanying tabulation of meteorological and constituent data is also presented. The total overburden was aquired by Dobson Spectrophotometer 72.

A REACTOR DESIGN PARAMETER STUDY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, A.H.; LaVerne, M.E.; Burtnette, C.S.

1954-06-25

Multigroup calculations were performed on reflectormoderated systems to establish some of the nuclear characteristics of various reflector geometries and materials. C, Li/sup 7/, Li/sup 7/OD, and NaOD moderators were used with NaF-UF/ sub 4/ fuel. The results are tabulated for 57 moderator and dimensional variations. (D.E.B.)

Biomass estimates of eastern red cedar tree components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schnell, R.L.

1976-02-01

Fresh and dry-weight relationships of species of the eastern red cedar (Juniperus virginiana L.) found in the Tennessee Valley are presented. Both wood and bark were analyzed. All fresh and dry weights tabulated were computed from predicting equations developed by multiple regression analysis of field data. (JGB)