Take Our Children to Work Day

NASA Image and Video Library

2008-07-16

Hundreds of children participated in the annual Take Our Children to Work Day at Stennis Space Center on July 29. During the day, children of Stennis employees received a tour of facilities and took part in various activities, including demonstrations in cryogenics and robotics.

Improving working equine welfare in ‘hard-win’ situations, where gains are difficult, expensive or marginal

PubMed Central

Pritchard, Joy; Hirson, Tamsin

2018-01-01

Purpose Brooke is a non-government organisation with working equine welfare programmes across Africa, Asia and Latin America. In 2014, staff from ten country programmes were asked to identify ‘no-win’ situations (subsequently reframed as ‘hard-wins’)—where improving equine welfare is proving difficult, expensive and/or marginal—in order to inform strategic decisions on how to approach, manage and mitigate for such situations. Methods The Delphi-type consultation process had three phases. Round 1 posed five questions in the form of a workshop, survey and semi-structured interviews. Round 2 re-presented key themes and sense-checked initial conclusions. Round 3 reviewed the nature and prevalence of hard-win situations at an international meeting of all participants. Results Reasons given for hard-win situations included: no economic or social benefit from caring for working animals; poor resource availability; lack of empathy for working equids or their owners among wider stakeholders; deep-seated social issues, such as addiction or illegal working; areas with a high animal turnover or migratory human population; lack of community cooperation or cohesion; unsafe areas where welfare interventions cannot be adequately supported. Participants estimated the prevalence of hard-win situations as 40–70% of their work. They suggested some current ways of working that may be contributing to the problem, and opportunities to tackle hard-wins more effectively. Conclusion and animal welfare implications Respondents agreed that if equine welfare improvements are to span generations of animals, interventions cannot rely on relatively simple, technical knowledge-transfer strategies and quick-wins alone. Programmes need to be more flexible and iterative and less risk-averse in their approaches to embedding good equine welfare practices in all relevant actors. Consultation recommendations informed development of Brooke’s new global strategy, a revised organisational

Work/Life Balance: It Is Just Plain Hard.

PubMed

Bajaj, Anureet K

2018-05-01

Graduating surgeons are constantly told to be "available, affable, and able." Frequently, the need to put patients first can result in an imbalance between work and life. Ultimately, the consequence of work/life imbalance is burnout, which can manifest itself in atypical behavior toward patients, colleagues, and family. It is imperative that all surgeons learn to take care of themselves and develop a better integration of work and life.

2012 Take Our Children to Work Day

NASA Image and Video Library

2012-07-31

More than 250 children of employees at 15 Stennis Space Center resident agencies and organizations visited the facility July 31 to participate in annual Take Our Children to Work Day activities. Participants enjoyed various presentations and demonstrations on topics such as cryogenics and information security. They also had an opportunity to visit site facilities to learn about various work performed at the NASA center.

TAKE OUR CHILDREN TO WORK DAY

NASA Image and Video Library

2016-06-23

NASA’S MARSHALL SPACE FLIGHT CENTER KICKS OFF ITS ANNUAL "TAKE OUR CHILDREN TO WORK DAY" EVENTS JUNE 23 WITH OPENING REMARKS FROM LOUCIOUS HIRES, DIRECTOR OF MARSHALL’S OFFICE OF DIVERSITY AND EQUAL OPPORTUNITY. AN ESTIMATED 500 POTENTIAL FUTURE SPACEFARERS, SCIENTISTS AND ENGINEERS IN GRADES 3-12 TOOK PART IN THE DAY’S ACTIVITIES, TOURS AND PRESENTATIONS.

2011 Take Our Children to Work Day

NASA Image and Video Library

2011-07-26

Some 230 children of Stennis Space Center employees visited the facility July 26 to participate in annual Take Our Children to Work Day activities. Participants enjoyed various presentations and demonstrations on topics such as cryogenics, underwater robotics and geocaching.

College and Career Readiness: Course Taking of Deaf and Hard-of-Hearing Secondary School Students

ERIC Educational Resources Information Center

Nagle, Katherine; Newman, Lynn A.; Shaver, Debra M.; Marschark, Marc

2016-01-01

As schools work to raise the number of students who leave secondary school ready for college and career by increasing both the number of academic courses required and the overall rigor of the curriculum, they must ensure that students with disabilities, including those who are deaf or hard of hearing (DHH), are not left behind. They can do this by…

Self-reported hard physical work combined with heavy smoking or overweight may result in so-called Modic changes.

PubMed

Leboeuf-Yde, Charlotte; Kjaer, Per; Bendix, Tom; Manniche, Claus

2008-01-14

Recently, the MRI finding of "Modic changes" has been identified as pathologic spinal condition that probably reflects a vertebral inflammatory process (VIP), which coincides with spinal pain in most. We hypothesized that heavy smoking in combination with macro- or repeated microtrauma could lead to VIP. The objectives were to investigate if combinations of self-reported heavy smoking, hard physical work, and overweight would be more strongly linked with VIP than with other spinal conditions, such as degenerated discs and non-specific low back pain (LBP). Secondary analysis was made of a data base pertaining to a population-based cross-sectional study. A population-generated cohort of 412 40-yr old Danes provided questionnaire information on smoking, weight, height, type of work, and LBP. MRI was used to determine the presence/absence of disc degeneration and of VIP. Associations were tested between three explanatory variables (type of work, smoking, and body mass index) and four outcome variables (LBP in the past year, more persistent LBP in the past year, disc degeneration, and VIP). Associations with these four outcome variables were studied for each single explanatory variable and for combinations of two at a time, and, finally, in a multivariable analysis including all three explanatory variables. There were no significant associations between the single explanatory variables and the two pain variables or with disc degeneration. However, VIP was found in 15% of non-smokers vs. 26% of heavy smokers. Similarly, VIP was noted in 11% of those in sedentary jobs vs. 31% of those with hard physical work. Further, the prevalence of VIP in those, who neither smoked heavily nor had a hard physical job was 13%, 25% in those who either smoked heavily or had a hard physical job, and 41% in those who both smoked heavily and worked hard. The odds ratio was 4.9 (1.6-13.0) for those who were both heavy smokers and had a hard physical job as compared to those who were

Taking leave from work: the impact of culture on Japanese female nurses.

PubMed

Mizuno-Lewis, Satomi; McAllister, Margaret

2008-01-01

This paper provides an overview of nurses' working conditions in Japan, exploring tensions between nurses' rights to take leave from work to fulfil family and personal needs and their actual ability to take such leave. It also considers possible effects of being restricted from taking such leave. Little has been written on the specific needs of nurses who are mothers in the Japanese work environment. Research has focussed on the effects of heavy, stressful workloads and long working hours leading to burnout, death from overwork and suicides in Japanese culture. However, research that considers unique cultural and female issues in Japan affecting nursing work has not been published. Discursive. The paper shows that there are many overlapping, complex issues affecting nurses working in Japan and their needs need to be considered and addressed in order to promote a healthier work environment, as well as a more humanistic environment. Workplace issues are relevant to recruitment and retention and better conditions are likely to improve hospital functioning.

Psychosocial factors in GP work: the effects of taking a GP position or leaving GP work.

PubMed

Heponiemi, Tarja; Kouvonen, Anne; Aalto, Anna-Mari; Elovainio, Marko

2013-06-01

We examined the effects of leaving public sector general practitioner (GP) work and of taking a GP position on changes in work-related psychosocial factors, such as time pressure, patient-related stress, distress and work interference with family. In addition, we examined whether changes in time pressure and patient-related stress mediated the association of employment change with changes of distress and work interference with family. Participants were 1705 Finnish physicians (60% women) who responded to surveys in 2006 and 2010. Analyses of covariance were conducted to examine the effect of employment change to outcome changes adjusted for gender, age and response format. Mediational effects were tested following the procedures outlined by Baron and Kenny. Employment change was significantly associated with all the outcomes. Leaving public sector GP work was associated with substantially decreased time pressure, patient-related stress, distress and work interference with family. In contrast, taking a position as a public sector GP was associated with an increase in these factors. Mediation tests suggested that the associations of employment change with distress change and work interference with family change were partially explained by the changes in time pressure and patient-related stress. Our results showed that leaving public sector GP work is associated with favourable outcomes, whereas taking a GP position in the public sector is associated with adverse effects. Primary health-care organizations should pay more attention to the working conditions of their GPs, in particular, to time pressure and patient-related stress.

Between Hope and Hard Times: New York's Working Families in Economic Distress

ERIC Educational Resources Information Center

Fischer, David J.; Colton, Tara; Kleiman, Neil S.; Schimke, Karen

2004-01-01

Today, many jobs that once could support a family barely suffice to keep that family out of poverty. The implied bargain America offers its citizens is supposed to be that anyone who works hard and plays by the rules can support his or her family and move onward and upward. But for millions of New Yorkers, that bargain is out of reach; the uphill…

Inhomogeneous hard homonuclear molecules

NASA Astrophysics Data System (ADS)

Quintana, Jacqueline

A review is given of some features of theories for inhomogeneous fluids of nonspherical molecules that take as input the direct correlation function of the corresponding homogeneous system. Two different methods are described for defining the structure of hard homonuclear molecules close to a hard planar wall. A spherical harmonics expanison (SHE) within the integral equation (IE) method is presented and, for comparison, a version of density functional theory for orientable hard bodies. In both cases the Pynn-Lado model is employed and a comparison is made with Monte Carlo data. The results indicate that for hard molecules the IE approach does not always capture the effects of orientation due to the characteristics of the SHE for the step function. This disadvantage is particularly true in the case of the orientationally averaged density profile.

Rotation of hard particles in a soft matrix

NASA Astrophysics Data System (ADS)

Yang, Weizhu; Liu, Qingchang; Yue, Zhufeng; Li, Xiaodong; Xu, Baoxing

Soft-hard materials integration is ubiquitous in biological materials and structures in nature and has also attracted growing attention in the bio-inspired design of advanced functional materials, structures and devices. Due to the distinct difference in their mechanical properties, the rotation of hard phases in soft matrixes upon deformation has been acknowledged, yet is lack of theory in mechanics. In this work, we propose a theoretical mechanics framework that can describe the rotation of hard particles in a soft matrix. The rotation of multiple arbitrarily shaped, located and oriented particles with perfectly bonded interfaces in an elastic soft matrix subjected to a far-field tensile loading is established and analytical solutions are derived by using complex potentials and conformal mapping methods. Strong couplings and competitions of the rotation of hard particles among each other are discussed by investigating numbers, relative locations and orientations of particles in the matrix at different loading directions. Extensive finite element analyses are performed to validate theoretical solutions and good agreement of both rotation and stress field between them are achieved. Possible extensions of the present theory to non-rigid particles, viscoelastic matrix and imperfect bonding are also discussed. Finally, by taking advantage of the rotation of hard particles, we exemplify an application in a conceptual design of soft-hard material integrated phononic crystal and demonstrate that phononic band gaps can be successfully tuned with a high accuracy through the mechanical tension-induced rotation of hard particles. The present theory established herein is expected to be of immediate interests to the design of soft-hard materials integration based functional materials, structures and devices with tunable performance via mechanical rotation of hard phases.

China takes microgravity work to new heights | Science | AAAS

Science.gov Websites

China takes microgravity work to new heights By Dennis Normile Apr. 5, 2016 , 2:00 PM China's space :10.1126/science.aaf9876 Dennis Normile More from News illustration of GOES-17 Cooling failure threatens

Further links between the maximum hardness principle and the hard/soft acid/base principle: insights from hard/soft exchange reactions.

PubMed

Chattaraj, Pratim K; Ayers, Paul W; Melin, Junia

2007-08-07

Ayers, Parr, and Pearson recently showed that insight into the hard/soft acid/base (HSAB) principle could be obtained by analyzing the energy of reactions in hard/soft exchange reactions, i.e., reactions in which a soft acid replaces a hard acid or a soft base replaces a hard base [J. Chem. Phys., 2006, 124, 194107]. We show, in accord with the maximum hardness principle, that the hardness increases for favorable hard/soft exchange reactions and decreases when the HSAB principle indicates that hard/soft exchange reactions are unfavorable. This extends the previous work of the authors, which treated only the "double hard/soft exchange" reaction [P. K. Chattaraj and P. W. Ayers, J. Chem. Phys., 2005, 123, 086101]. We also discuss two different approaches to computing the hardness of molecules from the hardness of the composing fragments, and explain how the results differ. In the present context, it seems that the arithmetic mean of fragment softnesses is the preferable definition.

Take Your Child to Work Day Poster Puzzler | Poster

Cancer.gov

Your challenge is to find this item and fill in the blanks below from a nearby label or sign. The label/sequence that you're looking for would fit here: "_ _ _ _ - _ - _ _ _". Here's one more clue: The item pictured above is in or around the Take Your Child to Work Day hub area!

Research in the Hard Sciences, and in Very Hard "Softer" Domains

ERIC Educational Resources Information Center

Phillips, D. C.

2014-01-01

The author of this commentary argues that physical scientists are attempting to advance knowledge in the so-called hard sciences, whereas education researchers are laboring to increase knowledge and understanding in an "extremely hard" but softer domain. Drawing on the work of Popper and Dewey, this commentary highlights the relative…

Tips for Working with Deaf or Hard-of-Hearing Student Employees in the Library

ERIC Educational Resources Information Center

Henderson, John

2009-01-01

For a deaf or hard-of-hearing employee, working in an academic library can be a rewarding opportunity and a great way to interact with the hearing world. For department heads, it means changes or adjustments might need to be made in how training and interacting with their employees is handled. Using 10 tips to communicate, from visual aids to…

Differential associations between impulsivity and risk-taking and brain activations underlying working memory in adolescents.

PubMed

Panwar, Karni; Rutherford, Helena J V; Mencl, W Einar; Lacadie, Cheryl M; Potenza, Marc N; Mayes, Linda C

2014-11-01

Increased impulsivity and risk-taking are common during adolescence and relate importantly to addictive behaviors. However, the extent to which impulsivity and risk-taking relate to brain activations that mediate cognitive processing is not well understood. Here we examined the relationships between impulsivity and risk-taking and the neural correlates of working memory. Neural activity was measured in 18 adolescents (13-18 years) while they engaged in a working memory task that included verbal and visuospatial components that each involved encoding, rehearsal and recognition stages. Risk-taking and impulsivity were assessed using the Balloon Analogue Risk Task (BART) and the adolescent version of the Barratt Impulsiveness Scale-11 (BIS-11A), respectively. We found overlapping as well as distinct regions subserving the different stages of verbal and visuospatial working memory. In terms of risk-taking, we found a positive correlation between BART scores and activity in subcortical regions (e.g., thalamus, dorsal striatum) recruited during verbal rehearsal, and an inverse correlation between BART scores and cortical regions (e.g., parietal and temporal regions) recruited during visuospatial rehearsal. The BIS-11A evidenced that motor impulsivity was associated with activity in regions recruited during all stages of working memory, while attention and non-planning impulsivity was only associated with activity in regions recruited during recognition. In considering working memory, impulsivity and risk-taking together, both impulsivity and risk-taking were associated with activity in regions recruited during rehearsal; however, during verbal rehearsal, differential correlations were found. Specifically, positive correlations were found between: (1) risk-taking and activity in subcortical regions, including the thalamus and dorsal striatum; and, (2) motor impulsivity and activity in the left inferior frontal gyrus, insula, and dorsolateral prefrontal cortex. Therefore

Differential associations between impulsivity and risk-taking and brain activations underlying working memory in adolescents

PubMed Central

Panwar, Karni; Rutherford, Helena J.V.; Mencl, W. Einar; Lacadie, Cheryl M.; Potenza, Marc N.; Mayes, Linda C.

2014-01-01

Increased impulsivity and risk-taking are common during adolescence and relate importantly to addictive behaviors. However, the extent to which impulsivity and risk-taking relate to brain activations that mediate cognitive processing is not well understood. Here we examined the relationships between impulsivity and risk-taking and the neural correlates of working memory. Neural activity was measured in 18 adolescents (13–18 years) while they engaged in a working memory task that included verbal and visuospatial components that each involved encoding, rehearsal and recognition stages. Risk-taking and impulsivity were assessed using the Balloon Analogue Risk Task (BART) and the adolescent version of the Barratt Impulsiveness Scale -11 (BIS-11A), respectively. We found overlapping as well as distinct regions subserving the different stages of verbal and visuospatial working memory. In terms of risk-taking, we found a positive correlation between BART scores and activity in subcortical regions (e.g., thalamus, dorsal striatum) recruited during verbal rehearsal, and an inverse correlation between BART scores and cortical regions (e.g., parietal and temporal regions) recruited during visuospatial rehearsal. The BIS-11A evidenced that motor impulsivity was associated with activity in regions recruited during all stages of working memory, while attention and non-planning impulsivity was only associated with activity in regions recruited during recognition. In considering working memory, impulsivity and risk-taking together, both impulsivity and risk-taking were associated with activity in regions recruited during rehearsal; however, during verbal rehearsal, differential correlations were found. Specifically, positive correlations were found between: (1) risk-taking and activity in subcortical regions, including the thalamus and dorsal striatum; and, (2) motor impulsivity and activity in the left inferior frontal gyrus, insula, dorsolateral and ventrolateral prefrontal

Sleep problems across development: a pathway to adolescent risk taking through working memory.

PubMed

Thomas, April Gile; Monahan, Kathryn C; Lukowski, Angela F; Cauffman, Elizabeth

2015-02-01

Problematic sleep can be detrimental to the development of important cognitive functions, such as working memory, and may have the potential for negative behavioral consequences, such as risk-taking. In this way, sleep problems may be particularly harmful for youth-whose cognitive abilities are still developing and who are more susceptible to risky behavior. Using data from a large, national, longitudinal study, continuity and change in sleep problems were examined from 2 to 15 years of age and associated with deficits in working memory at age 15 and risk taking behaviors at age 18. Participants (N = 1,364 children; 48.3% female) were assessed for sleep problems (parent-report), working memory (behavioral task), and risk taking behavior (youth self-report). The sample was predominantly White (80.4%); additional races represented in the sample included Black/African American (12.9%), Asian/Pacific Islander (1.6%), American Indian/Eskimo/Aleut (.4%), and Other (4.7%). The findings suggest that sleep problems are likely to cascade across development, with sleep problems demonstrating continuity from infancy to early childhood, early childhood to middle childhood, and middle childhood to adolescence. Although sleep problems in infancy, early childhood, and middle childhood were not directly related to adolescent working memory, sleep problems during adolescence were associated with poorer adolescent working memory. In turn, these deficits in working memory were related to greater risk taking in late adolescence. In summary, the present results suggest that sleep problems in earlier periods are indicative of risk for sleep problems later in development, but that sleep problems in adolescence contribute uniquely to deficits in working memory that, in turn, lead to risky behavior during late adolescence.

Becoming a nurse faculty leader: Taking risks by being willing to fail.

PubMed

Pardue, Karen T; Young, Patricia K; Horton-Deutsch, Sara; Halstead, Judith; Pearsall, Catherine

2018-04-01

Higher education is undergoing rapid transformation requiring nurse faculty leaders to engage in risk taking. Consequently, what is known about the experience of taking risks? How do leaders decide what constitutes a risk worth taking? How do leaders who take risks tolerate failure? The purpose of this study was to explicate the leadership practices of risk taking in nurse faculty leaders. Interpretive phenomenology was used to explore the experience of risk taking among 15 self-identified nurse faculty leaders. Unstructured audio recorded interviews were conducted in which participants described their experiences of taking risks. Transcribed interviews were analyzed by a research team to uncover themes in the narrative data. A theme, willingness to fail, and three subthemes, enacting a culture of experimentation, working hard for success, and learning from failure are reported. This study provides practical know-how and an evidence-base to support nurse academic leaders in the practice of risk taking during these challenging times in higher education. © 2018 Wiley Periodicals, Inc.

Combining field work and laboratory work in the study of financial risk-taking.

PubMed

Coates, John; Gurnell, Mark

2017-06-01

A contribution to a special issue on Hormones and Human Competition. Financial markets are periodically destabilized by bubbles and crashes during which investors display respectively what has been called "irrational exuberance" and "irrational pessimism". How can we best study these pathologies in competitive and risk-taking behaviours? In this article, we argue that a science of risk-taking and of the financial markets needs to draw heavily on physiology and especially endocrinology, due to their central roles in moderating human behaviour. Importantly, this science of competition and risk requires the same spectrum of research protocols as is found in mature biological and medical sciences, a spectrum running from field work conducted within financial institutions themselves to more controlled laboratory studies, which permit cause to be distinguished from effect. Such a spectrum of studies is especially important for translational behavioural science. Copyright © 2017 Elsevier Inc. All rights reserved.

What Goes into High Educational and Occupational Achievement? Education, Brains, Hard Work, Networks, and Other Factors

ERIC Educational Resources Information Center

Wai, Jonathan; Rindermann, Heiner

2017-01-01

There are many factors that go into high educational and occupational achievement, including hard work, motivation, and luck. But how important is talent? Specifically, how likely were global innovators and leaders intellectually talented or gifted when younger? This paper reviews retrospective data on multiple US samples (Total N = 11,745),…

The Burden of Acting Wise: Sanctioned Success and Ambivalence about Hard Work at an Elite School in the Netherlands

ERIC Educational Resources Information Center

Mijs, Jonathan J. B.; Paulle, Bowen

2016-01-01

Sam and his classmates despise "nerds": they say working hard in school makes a student unpopular, and that they purposefully do only the minimum to pass. Research suggests that such "oppositional" attitudes are prevalent among working class students and/or ethnoracial minorities. Like most of his classmates, however, Sam is…

Social Work with Students Who Are Deaf or Hard of Hearing

ERIC Educational Resources Information Center

Sinnott, Cheri; Looney, Deirdre; Martin, Susan

2012-01-01

Students who are deaf and hard of hearing are being mainstreamed in their neighborhood schools more frequently, and many school social workers feel unprepared to deal with the unique needs of this low-incidence population. This article describes the various social/emotional issues impacting students who are deaf or hard of hearing and provides…

'It was hard but you did it': the co-production of 'work' in a clinical setting among spinal cord injured adults and their physical therapists.

PubMed

Papadimitriou, Christina

2008-01-01

This paper focuses on what takes place during the rehabilitation of spinal cord injured (SCI) adults. It analyses the cardinal rehabilitation task of transforming the compromised, limited and injured corporeal style of newly injured adults (best described phenomenologically as an 'I cannot do' or 'I no longer can') into a new style of embodiment, one in which 'I am newly abled'. This transformation is not a passive, surrendering experience. Rather, as informants repeatedly noted, 'rehabilitation is hard work'. This paper examines that 'work'. This paper draws from observational and interview data collected over an 18-month period in a metropolitan rehabilitation centre in the Midwestern United States. It presents an exemplar case of a clinical setting, that between a physical therapist and her SCI client. The interactional and meaning-making nature of clinical encounters are explicated, revealing the collaborative and situational constitution of rehabilitation work. Experience-near, phenomenologically informed, research is shown to be a valuable way of understanding rehabilitation practices and how they might affect inpatients and staff.

Healthy Kids; Healthy World - Take Your Child to Work Day 2016

Cancer.gov

On April 28th CGH joined several NCI offices at the Shady Grove campus to celebrate Take Your Child to Work Day 2016. Volunteers hosted three activity stations, each offering creative fun with a message: With healthy kids, we can create a healthier world.

Evaluating Teachers' Preparedness to Work with Students Who Are Deaf and Hard of Hearing with Disabilities

ERIC Educational Resources Information Center

Guardino, Caroline

2015-01-01

A national survey was conducted to determine the needs of teachers and service providers working with students who are deaf and hard of hearing with disabilities (DWD). Quantitative and qualitative questions were asked regarding knowledge of, training with, and strategies used with students who are DWD. Responses from 264 professionals working…

Programs Needed for 2017 Take Your Child to Work Day | Poster

Cancer.gov

On Wednesday, June 28, the NCI grounds will be filled with the chatter and laughter of children for the 21st annual Take Your Child to Work Day event. Every year, the event aims to spark children’s interest in science through a variety of programs and activities.

On the impossibility of defining adhesive hard spheres as sticky limit of a hard-sphere-Yukawa potential.

PubMed

Gazzillo, Domenico

2011-03-28

For fluids of molecules with short-ranged hard-sphere-Yukawa (HSY) interactions, it is proven that the Noro-Frenkel "extended law of corresponding states" cannot be applied down to the vanishing attraction range, since the exact HSY second virial coefficient diverges in such a limit. It is also shown that, besides Baxter's original approach, a fully correct alternative definition of "adhesive hard spheres" can be obtained by taking the vanishing-range-limit (sticky limit) not of a Yukawa tail, as is commonly done, but of a slightly different potential with a logarithmic-Yukawa attraction.

The busy shall inherit the earth: the evolution from 'hard work' to 'busyness' in modern science and society.

PubMed

Charlton, Bruce G

2006-01-01

Although 'hard work' and 'busyness' are somewhat similar terms, there seem to be significant differences in the way that they are used. While hard work has always been a feature of complex societies, modern society can be seen as evolving toward being dominated by jobs characterized by busyness. Busyness refers to multi-tasking - having many sequential jobs to perform and switching frequently between them on an externally-imposed schedule. Traditionally, the individual gifts of a successful scientist were mainly in terms of knowledge, theoretical or technical aptitude. But nowadays the successful scientist is often one who has been promoted from hard-work to busyness: an expert in synthesizing a sufficient degree of scientific ability with a broad range of managerial and political skills. It is psychologically tough to be busy, because busyness is a consequence of human beings being constrained by the functioning of abstract social systems. In a complex modern organization, individual psychology is subordinated to inflexible programs of being in specific places at specific times doing specific things - this is both tricky to do well and demanding to do at all. Since people are paid (mainly) to do difficult but necessary things they would prefer not to do, busyness has become a major reason why people are paid a premium salary. In the long-term, many straightforward jobs will be analyzed and routinized out of existence, with the narrowly-skilled worker being replaced by teams, machines or computers. But busy jobs are hard to eliminate because they are those in which it is optimal for a variety of disparate and unpredictable tasks to be done by a single person. Consequently, those individuals who can cope with, even thrive-upon, busyness are becoming indispensable. In future 'the busy shall inherit the earth' (or, at least, the most powerful and highest paid jobs), not just in science but in all major social domains.

The effects of work surface hardness on mechanical stress, muscle activity, and wrist postures.

PubMed

Kim, Jeong Ho; Aulck, Lovenoor; Trippany, David; Johnson, Peter W

2015-01-01

Contact pressure is a risk factor which can contribute to musculoskeletal disorders. The objective of the present study was to determine whether a work surface with a soft, pliable front edge could reduce contact pressure, muscle activity, and subjective musculoskeletal comfort, and improve wrist posture relative to a conventional, hard work surface. In a repeated-measures blinded experiment with eighteen subjects (8 females and 10 males), contact pressure, wrist posture, typing productivity, perceived fatigue, wrist and shoulder muscle activity, and subjective comfort were compared between the two different work surfaces during keyboard use, mouse use and mixed mouse and keyboard use. The results showed that across the three modes of computer work, the contact pressure was lower on the soft-edge work surface compared to the conventional work surface (p's <0.03) and subjects reported to have less perceived fatigue in the forearms and wrists. No differences in muscle activity, wrist posture, and subjective comfort were measured between the two work surfaces. Given the significant reduction in contact pressure and corresponding lower ratings in perceived fatigue, the soft-edge work surface subjectively and objectively improved measures of contact stress which may reduce physical exposures associated with the onset and development of musculoskeletal disorders.

Demixing, surface nematization, and competing adsorption in binary mixtures of hard rods and hard spheres under confinement

NASA Astrophysics Data System (ADS)

Wu, Liang; Malijevský, Alexandr; Avendaño, Carlos; Müller, Erich A.; Jackson, George

2018-04-01

A molecular simulation study of binary mixtures of hard spherocylinders (HSCs) and hard spheres (HSs) confined between two structureless hard walls is presented. The principal aim of the work is to understand the effect of the presence of hard spheres on the entropically driven surface nematization of hard rod-like particles at surfaces. The mixtures are studied using a constant normal-pressure Monte Carlo algorithm. The surface adsorption at different compositions is examined in detail. At moderate hard-sphere concentrations, preferential adsorption of the spheres at the wall is found. However, at moderate to high pressure (density), we observe a crossover in the adsorption behavior with nematic layers of the rods forming at the walls leading to local demixing of the system. The presence of the spherical particles is seen to destabilize the surface nematization of the rods, and the degree of demixing increases on increasing the hard-sphere concentration.

Demixing, surface nematization, and competing adsorption in binary mixtures of hard rods and hard spheres under confinement.

PubMed

Wu, Liang; Malijevský, Alexandr; Avendaño, Carlos; Müller, Erich A; Jackson, George

2018-04-28

A molecular simulation study of binary mixtures of hard spherocylinders (HSCs) and hard spheres (HSs) confined between two structureless hard walls is presented. The principal aim of the work is to understand the effect of the presence of hard spheres on the entropically driven surface nematization of hard rod-like particles at surfaces. The mixtures are studied using a constant normal-pressure Monte Carlo algorithm. The surface adsorption at different compositions is examined in detail. At moderate hard-sphere concentrations, preferential adsorption of the spheres at the wall is found. However, at moderate to high pressure (density), we observe a crossover in the adsorption behavior with nematic layers of the rods forming at the walls leading to local demixing of the system. The presence of the spherical particles is seen to destabilize the surface nematization of the rods, and the degree of demixing increases on increasing the hard-sphere concentration.

Crystallization of hard spheres revisited. II. Thermodynamic modeling, nucleation work, and the surface of tension.

PubMed

Richard, David; Speck, Thomas

2018-06-14

Combining three numerical methods (forward flux sampling, seeding of droplets, and finite-size droplets), we probe the crystallization of hard spheres over the full range from close to coexistence to the spinodal regime. We show that all three methods allow us to sample different regimes and agree perfectly in the ranges where they overlap. By combining the nucleation work calculated from forward flux sampling of small droplets and the nucleation theorem, we show how to compute the nucleation work spanning three orders of magnitude. Using a variation of the nucleation theorem, we show how to extract the pressure difference between the solid droplet and ambient liquid. Moreover, combining the nucleation work with the pressure difference allows us to calculate the interfacial tension of small droplets. Our results demonstrate that employing bulk quantities yields inaccurate results for the nucleation rate.

A Day as a Scientist: Take Your Child to Work Day | Poster

Cancer.gov

Do you ever dream you could fight a fire, conduct fascinating experiments, and eat ice cream all in one day? A record number of kids—285 in all—got to do just that during the NCI at Frederick’s annual Take Your Child to Work Day.

Return to work or job transition? Employer dilemmas in taking social responsibility for return to work in local workplace practice.

PubMed

Seing, Ida; MacEachen, Ellen; Ekberg, Kerstin; Ståhl, Christian

2015-01-01

The aim was to analyze the role and activities of employers with regard to return to work (RTW), in local workplace practice. Semi-structured interviews were conducted with sick-listed workers and their supervisors in 18 workplaces (n = 36). The analytical approach to study the role of employers in RTW was based on the three-domain model of social corporate responsibility. The model illustrates the linkage between corporations and their social environment, and consists of three areas of corporate responsibility: economic, legal and ethical. Employers had difficulties in taking social responsibility for RTW, in that economic considerations regarding their business took precedence over legal and ethical considerations. Employers engaged in either "RTW activities" or "transition activities" that were applied differently depending on how valued sick-listed workers were considered to be to their business, and on the nature of the job (e.g., availability of suitable work adjustments). This study suggests that Swedish legislation and policies does not always adequately prompt employers to engage in RTW. There is a need for further attention to the organizational conditions for employers to take social responsibility for RTW in the context of business pressure and work intensification. Employers may have difficulties in taking social responsibility for RTW when economic considerations regarding their business take precedence over legal and ethical considerations. Rehabilitation professionals should be aware of that outcomes of an RTW process can be influenced by the worker's value to the employer and the nature of the job (e.g., availability of suitable work adjustments). "Low-value" workers at workplaces with limited possibilities to offer workplace adjustments may run a high risk of dismissal. Swedish legislation and policies may need reforms to put more pressure on employers to promote RTW.

Deaf and hard of hearing Americans' instant messaging and e-mail use: a national survey.

PubMed

Bowe, Frank G

2002-10-01

An online survey of 884 deaf and hard of hearing adults asked about their current and past use of communication technologies, notably TTY, telecommunications relay services, e-mail, and instant messaging (IM). Results showed that respondents were using e-mail and IM far more than TTY and relay services. The study participants virtually all had e-mail and IM at home. In fact, about one quarter had a high-speed ("broadband") connection at home. While the vast majority also had and used e-mail at work, just 1 in 3 had IM at his or her place of employment. The findings have several implications. Most important for educators is that strong reading and writing skills are essential if adults who are deaf or hard of hearing are to take advantage of today's communications technologies. Another conclusion is that some workers who are deaf or hard of hearing appear to face discrimination in employment because office policies forbid the use of a highly effective reasonable accommodation, instant messaging.

Hard-on-hard lubrication in the artificial hip under dynamic loading conditions.

PubMed

Sonntag, Robert; Reinders, Jörn; Rieger, Johannes S; Heitzmann, Daniel W W; Kretzer, J Philippe

2013-01-01

The tribological performance of an artificial hip joint has a particularly strong influence on its success. The principle causes for failure are adverse short- and long-term reactions to wear debris and high frictional torque in the case of poor lubrication that may cause loosening of the implant. Therefore, using experimental and theoretical approaches models have been developed to evaluate lubrication under standardized conditions. A steady-state numerical model has been extended with dynamic experimental data for hard-on-hard bearings used in total hip replacements to verify the tribological relevance of the ISO 14242-1 gait cycle in comparison to experimental data from the Orthoload database and instrumented gait analysis for three additional loading conditions: normal walking, climbing stairs and descending stairs. Ceramic-on-ceramic bearing partners show superior lubrication potential compared to hard-on-hard bearings that work with at least one articulating metal component. Lubrication regimes during the investigated activities are shown to strongly depend on the kinematics and loading conditions. The outcome from the ISO gait is not fully confirmed by the normal walking data and more challenging conditions show evidence of inferior lubrication. These findings may help to explain the differences between the in vitro predictions using the ISO gait cycle and the clinical outcome of some hard-on-hard bearings, e.g., using metal-on-metal.

Hard-on-Hard Lubrication in the Artificial Hip under Dynamic Loading Conditions

PubMed Central

Sonntag, Robert; Reinders, Jörn; Rieger, Johannes S.; Heitzmann, Daniel W. W.; Kretzer, J. Philippe

2013-01-01

The tribological performance of an artificial hip joint has a particularly strong influence on its success. The principle causes for failure are adverse short- and long-term reactions to wear debris and high frictional torque in the case of poor lubrication that may cause loosening of the implant. Therefore, using experimental and theoretical approaches models have been developed to evaluate lubrication under standardized conditions. A steady-state numerical model has been extended with dynamic experimental data for hard-on-hard bearings used in total hip replacements to verify the tribological relevance of the ISO 14242-1 gait cycle in comparison to experimental data from the Orthoload database and instrumented gait analysis for three additional loading conditions: normal walking, climbing stairs and descending stairs. Ceramic-on-ceramic bearing partners show superior lubrication potential compared to hard-on-hard bearings that work with at least one articulating metal component. Lubrication regimes during the investigated activities are shown to strongly depend on the kinematics and loading conditions. The outcome from the ISO gait is not fully confirmed by the normal walking data and more challenging conditions show evidence of inferior lubrication. These findings may help to explain the differences between the in vitro predictions using the ISO gait cycle and the clinical outcome of some hard-on-hard bearings, e.g., using metal-on-metal. PMID:23940772

MSW Students' Motivations for Taking an International Social Work Elective Course

ERIC Educational Resources Information Center

Okech, David; Barner, John R.

2014-01-01

This article presents motivating factors for taking an international social work course for a sample of graduate students in the United States. Literature on international education, including courses and international field placements, provides a framework for the study. Qualitative themes showed that students were motivated primarily as a result…

Seeing their side versus feeling their pain: Differential consequences of perspective-taking and empathy at work.

PubMed

Longmire, Natalie H; Harrison, David A

2018-04-16

Perspective taking and empathic concern (empathy) have each been proposed as constructive approaches to social relationships. However, their potential distinctions, limitations, and consequences in task contexts are not well understood. We meta-analytically examined 304 independent samples to uncover unique effects of perspective taking and empathic concern on important work-related outcomes. We develop and test a contingency model of those effects, based on three facets of psychological interdependence: outcome, hierarchical (or power asymmetry), and social category (or in-group/out-group distinctions). Results revealed perspective taking and empathic concern to have positive impacts on being supportive of others, but the effects of empathic concern were stronger. In contrast, perspective taking was an asset and empathy was a liability for capturing value in strategic interactions (e.g., negotiations). Effects of perspective taking and empathic concern were differentially contingent on psychological interdependence. The impact of perspective taking, but not of empathic concern, was attenuated or reversed under negative outcome interdependence; perspective-taking leads to advantage taking in competitive contexts. Perspective taking was particularly beneficial when the actor had high power, but empathic concern's benefits were independent of hierarchy. Finally, social dissimilarity had no detectable impact on the effects of perspective taking or empathic concern, contrary to our theorizing. Overall results suggest two key conclusions. First, perspective taking and empathic concern have powerful effects on work-related outcomes. Second, each construct has its own distinctive and predictable impacts. We conclude by offering practical suggestions for improving workplace interactions through perspective taking and empathic concern. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Seismic signals hard clipping overcoming

NASA Astrophysics Data System (ADS)

Olszowa, Paula; Sokolowski, Jakub

2018-01-01

In signal processing the clipping is understand as the phenomenon of limiting the signal beyond certain threshold. It is often related to overloading of a sensor. Two particular types of clipping are being recognized: soft and hard. Beyond the limiting value soft clipping reduces the signal real gain while the hard clipping stiffly sets the signal values at the limit. In both cases certain amount of signal information is lost. Obviously if one possess the model which describes the considered signal and the threshold value (which might be slightly more difficult to obtain in the soft clipping case), the attempt of restoring the signal can be made. Commonly it is assumed that the seismic signals take form of an impulse response of some specific system. This may lead to belief that the sine wave may be the most appropriate to fit in the clipping period. However, this should be tested. In this paper the possibility of overcoming the hard clipping in seismic signals originating from a geoseismic station belonging to an underground mine is considered. A set of raw signals will be hard-clipped manually and then couple different functions will be fitted and compared in terms of least squares. The results will be then analysed.

Evaluating Teachers' Preparedness to Work With Students Who Are Deaf and Hard of Hearing With Disabilities.

PubMed

Guardino, Caroline

2015-01-01

A national survey was conducted to determine the needs of teachers and service providers working with students who are deaf and hard of hearing with disabilities (DWD). Quantitative and qualitative questions were asked regarding knowledge of, training with, and strategies used with students who are DWD. Responses from 264 professionals working with this population are reported. Results are reviewed and tied to previous research before and after the 2008 revalidation of the Council on Education of the Deaf standards for teachers of the deaf. Final recommendations are made for (a) virtual learning opportunities, (b) hands-on field experiences and course work in teacher preparation programs, and (c) empirically based research. By understanding the needs of professionals who are currently working with students who are DWD, researchers can help improve teacher preparation programs as well as improve the educational systems currently in place for these learners.

Signing on for dirty work: Taking stock of a public psychiatry project from the inside.

PubMed

Pope, Leah G; Cubellis, Lauren; Hopper, Kim

2016-08-01

As applied anthropologists used to working at arm's length from public psychiatry, we step out of the daily grind to take stock of the challenges of taking on ethnography entrained-harnessed to the implementation of a new program. These include the loss of critical distance, the struggles to negotiate locally viable forms of authority and relevance, the necessity of sustaining a Janus-faced relation with principal players, the urgency of seeing time-sensitive information converted into corrective feedback, and the undeniable attraction of being part of "committed work" with game-changing potential. In so doing, we rework the terms of witnessing and revive an old alternative: that documentary dirty work be reclaimed as a variant of public anthropology, one that transforms the work of application from mere afterthought to integral part of the original inquiry. © The Author(s) 2016.

Thermodynamic properties of a hard/soft-magnetic bilayer model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taaev, T. A., E-mail: taaev89@mail.ru; Khizriev, K. Sh.; Murtazaev, A. K.

2016-05-15

A model for describing the thermodynamic properties of a hard/soft-magnetic bilayer is proposed and thoroughly studied using the Monte Carlo method. Temperature dependences of the heat capacity, total magnetization, magnetizations of the hard- and soft-magnetic layers, total magnetic susceptibility, and susceptibilities of the hard- and soft-magnetic layers have been calculated by this method in the framework of the proposed model. The obtained temperature dependences of the heat capacity and magnetic susceptibility display double maxima that result from the two phase transitions that take place in the system. The influence of system dimensions on the thermodynamic properties of the model hasmore » been considered.« less

Dynamic I/O Power Management for Hard Real-Time Systems

DTIC Science & Technology

2005-01-01

recently emerged as an attractive alternative to inflexible hardware solutions. DPM for hard real - time systems has received relatively little attention...In particular, energy-driven I/O device scheduling for real - time systems has not been considered before. We present the first online DPM algorithm...which we call Low Energy Device Scheduler (LEDES), for hard real - time systems . LEDES takes as inputs a predetermined task schedule and a device-usage

When hard times take a toll: the distressing consequences of economic hardship and life events within the family-work interface.

PubMed

Young, Marisa; Schieman, Scott

2012-03-01

Using two waves of data from a national survey of working Americans (N = 1,122), we examine the associations among economic hardship, negative life events, and psychological distress in the context of the family-work interface. Our findings demonstrate that family-to-work conflict mediates the effects of economic hardship and negative events to significant others on distress (net of baseline distress and hardship). Moreover, economic hardship and negative events to significant others moderate the association between family-to-work conflict and distress. While negative events to others exacerbate the positive effect of family-to-work conflict on distress, we find the opposite for economic hardship: The positive association between hardship and distress is weaker at higher levels of family-to-work conflict. These patterns hold across an array of family, work, and sociodemographic conditions. We discuss how these findings refine and extend ideas of the stress process model, including complex predictions related to processes of stress-buffering, resource substitution, and role multiplication.

Nazareth College: Specialty Preparation for Speech-Language Pathologists to Work with Children Who Are Deaf and Hard of Hearing

ERIC Educational Resources Information Center

Brown, Paula M.; Quenin, Cathy

2010-01-01

The specialty preparation program within the speech-language pathology master's degree program at Nazareth College in Rochester, New York, was designed to train speech-language pathologists to work with children who are deaf and hard of hearing, ages 0 to 21. The program is offered in collaboration with the Rochester Institute of Technology,…

Guide to Working with Deaf and Hard of Hearing Students

ERIC Educational Resources Information Center

PEPNet, 2009

2009-01-01

This handbook was created for professors, high school teachers and vocational teachers new to interacting with Deaf and Hard of Hearing students. Topics include a general understanding of deafness, classroom accommodations, and communication tips. Appendices include: (1) A Professor Shares His Experience; (2) A Vocational Rehabilitation Counselor…

Theoretical model of hardness anisotropy in brittle materials

NASA Astrophysics Data System (ADS)

Gao, Faming

2012-07-01

Anisotropy is prominent in the hardness test of single crystals. However, the anisotropic nature is not demonstrated quantitatively in previous hardness model. In this work, it is found that the electron transition energy per unit volume in the glide region and the orientation of glide region play critical roles in determining hardness value and hardness anisotropy for a single crystal material. We express the mathematical definition of hardness anisotropy through simple algebraic relations. The calculated Knoop hardnesses of the single crystals are in good agreement with observations. This theory, extended to polycrystalline materials by including hall-petch effect and quantum size effect, predicts that the polycrystalline diamond with low angle grain boundaries can be harder than single-crystal bulk diamond. Combining first-principles technique and the formula of hardness anisotropy the hardness of monoclinic M-carbon, orthorhombic W-carbon, Z-carbon, and T-carbon are predicted.

On the hardness of high carbon ferrous martensite

NASA Astrophysics Data System (ADS)

Mola, J.; Ren, M.

2018-06-01

Due to the presence of retained austenite in martensitic steels, especially steels with high carbon concentrations, it is difficult to estimate the hardness of martensite independent of the hardness of the coexisting austenite. In the present work, the hardness of ferrous martensite with carbon concentrations in the range 0.23-1.46 mass-% was estimated by the regression analysis of hardnesses for hardened martensitic-austenitic steels containing various martensite fractions. For a given carbon concentration, the hardness of martensitic-austenitic steels was found to increase exponentially with an increase in the fraction of the martensitic constituent. The hardness of the martensitic constituent was subsequently estimated by the exponential extrapolation of the hardness of phase mixtures to 100 vol.% martensite. For martensite containing 1.46 mass-% carbon, the hardness was estimated to be 1791 HV. This estimate of martensite hardness is significantly higher than the experimental hardness of 822 HV for a phase mixture of 68 vol.% martensite and 32 vol.% austenite. The hardness obtained by exponential extrapolation is also much higher than the hardness of 1104 HV based on the rule of mixtures. The underestimated hardness of high carbon martensite in the presence of austenite is due to the non-linear dependence of hardness on the martensite fraction. The latter is also a common observation in composite materials with a soft matrix and hard reinforcing particles.

Positional ordering of hard adsorbate particles in tubular nanopores

NASA Astrophysics Data System (ADS)

Gurin, Péter; Varga, Szabolcs; Martínez-Ratón, Yuri; Velasco, Enrique

2018-05-01

The phase behavior and structural properties of a monolayer of hard particles is examined in such a confinement where the adsorbed particles are constrained to the surface of a narrow hard cylindrical pore. The diameter of the pore is chosen such that only first- and second-neighbor interactions occur between the hard particles. The transfer operator method of [Percus and Zhang, Mol. Phys. 69, 347 (1990), 10.1080/00268979000100241] is reformulated to obtain information about the structure of the monolayer. We have found that a true phase transition is not possible in the examined range of pore diameters. The monolayer of hard spheres undergoes a structural change from fluidlike order to a zigzaglike solid one with increasing surface density. The case of hard cylinders is different in the sense that a layering takes place continuously between a low-density one-row and a high-density two-row monolayer. Our results reveal a clear discrepancy with classical density functional theories, which do not distinguish smecticlike ordering in bulk from that in narrow periodic pores.

A Comparison of Phonemic and Phonological Awareness in Educators Working with Children Who Are d/Deaf or Hard of Hearing

ERIC Educational Resources Information Center

Messier, Jane; Jackson, Carla Wood

2013-01-01

The Researchers explored the phonological awareness (PA) competency and confidence of educators working with children who are d/Deaf or hard of hearing. Performance comparisons were made between the two surveyed professional groups, teachers of the deaf (TODs; n = 58) and speech-language pathologists (SLPs; n = 51). It was found that both…

"Hard Science" for Gifted 1st Graders

ERIC Educational Resources Information Center

DeGennaro, April

2006-01-01

"Hard Science" is designed to teach 1st grade gifted students accurate and high level science concepts. It is based upon their experience of the world and attempts to build a foundation for continued love and enjoyment of science. "Hard Science" provides field experiences and opportunities for hands-on discovery working beside experts in the field…

College and Career Readiness: Course Taking of Deaf and Hard of Hearing Secondary School Students

ERIC Educational Resources Information Center

Nagle, Katherine; Newman, Lynn A.; Shaver, Debra M.; Marschark, Marc

2015-01-01

Research shows that deaf and hard of hearing (DHH) students frequently enter college and the workplace relatively unprepared for success in math, science, and reading. Based on data from the National Longitudinal Transition Study-2 (NLTS2), the present study focused on DHH students' college and career readiness by investigating their opportunities…

Group electronegativity for prediction of materials hardness.

PubMed

Li, Keyan; Yang, Peng; Niu, Lingxiao; Xue, Dongfeng

2012-06-28

We have developed a method to predict the hardness of materials containing ultrastrong anionic polyhedra, dense atomic clusters, and layers stacked through van der Waals bonds on the basis of group electronegativity. By considering these polyhedra, clusters, and layers as groups that behave as rigid unities like superatoms bonding to other atoms or groups, the hardness values of materials such as oxysalts, T-carbon, and graphite were quantitatively calculated, and the results are consistent with the available experiments. We found that the hardness of materials containing these artificial groups is determined by the bonds between the groups and other atoms or groups, rather than by the weakest bonds. This work sheds light on the nature of materials hardness and the design of novel inorganic crystal materials.

20 CFR 10.515 - What actions must the employee take with respect to returning to work?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false What actions must the employee take with respect to returning to work? 10.515 Section 10.515 Employees' Benefits OFFICE OF WORKERS' COMPENSATION... EMPLOYEES' COMPENSATION ACT, AS AMENDED Continuing Benefits Return to Work-Employee's Responsibilities § 10...

Deaf and hard of hearing social workers accessing their profession: a call to action.

PubMed

Sheridan, Martha A; White, Barbara J; Mounty, Judith L

2010-01-01

This article aims to familiarize the social work profession with a paradox in its midst. Culturally sensitive and accessible services for deaf and hard of hearing people can often best be provided by social workers who are themselves deaf and hard of hearing, who have specialized language and communication skills, as well as unique cultural knowledge of this population at risk. Yet, deaf and hard of hearing graduates of social work education programs routinely experience difficulties accessing the profession. Addressing this paradox calls for creative collaborations among professional social work organizations, social work education programs, policymakers, and deaf and hard of hearing social workers.

Macroindentation hardness measurement-Modernization and applications.

PubMed

Patel, Sarsvat; Sun, Changquan Calvin

2016-06-15

In this study, we first developed a modernized indentation technique for measuring tablet hardness. This technique is featured by rapid digital image capture, using a calibrated light microscope, and precise area-determination. We then systematically studied effects of key experimental parameters, including indentation force, speed, and holding time, on measured hardness of a very soft material, hydroxypropyl cellulose, and a very hard material, dibasic calcium phosphate, to cover a wide range of material properties. Based on the results, a holding period of 3min at the peak indentation load is recommended to minimize the effect of testing speed on H. Using this method, we show that an exponential decay function well describes the relationship between tablet hardness and porosity for seven commonly used pharmaceutical powders investigated in this work. We propose that H and H at zero porosity may be used to quantify the tablet deformability and powder plasticity, respectively. Copyright © 2016 Elsevier B.V. All rights reserved.

Play or hard work: unpacking well-being at preschool.

PubMed

Kennedy-Behr, A; Rodger, S; Mickan, S

2015-03-01

Well-being or quality of life is thought to give a more accurate picture of the impact a condition has on day-to-day functioning than traditional outcome measures. This study sought to examine the relationship between engagement in play and well-being for preschool children with and without developmental coordination disorder (DCD). A quasi-experimental design was used with two independent groups of preschool children aged 4-6 years with (n=32) and without (n=31) probable DCD. Play skills were assessed using the Play Observation Scale based on 30min of videotape of free-play at preschool. Well-being was assessed using a parent-proxy version of the Revised Children Quality of Life Questionnaire (KINDL(R)). Spearman rho correlations were performed to examine the relationship between play and well-being. Well-being at preschool was significantly lower for the children in the DCD group however overall well-being was not significantly different. Engagement in type of social play (solitary, parallel or group) was found to predict well-being for the typically developing children. For the children with DCD, engagement in group play was not associated with well-being. An explanation for this difference may be that children with DCD may not experience free-play at preschool as "play" but rather as hard work. Further research is needed to determine why children with DCD experience lower well-being at preschool than their peers and to investigate children's perceptions of free-play. This may enable teachers and therapists to better support children with DCD in the preschool environment. Copyright © 2014 Elsevier Ltd. All rights reserved.

Hard Copy Market Overview

NASA Astrophysics Data System (ADS)

Testan, Peter R.

1987-04-01

A number of Color Hard Copy (CHC) market drivers are currently indicating strong growth in the use of CHC technologies for the business graphics marketplace. These market drivers relate to product, software, color monitors and color copiers. The use of color in business graphics allows more information to be relayed than is normally the case in a monochrome format. The communicative powers of full-color computer generated output in the business graphics application area will continue to induce end users to desire and require color in their future applications. A number of color hard copy technologies will be utilized in the presentation graphics arena. Thermal transfer, ink jet, photographic and electrophotographic technologies are all expected to be utilized in the business graphics presentation application area in the future. Since the end of 1984, the availability of color application software packages has grown significantly. Sales revenue generated by business graphics software is expected to grow at a compound annual growth rate of just over 40 percent to 1990. Increased availability of packages to allow the integration of text and graphics is expected. Currently, the latest versions of page description languages such as Postscript, Interpress and DDL all support color output. The use of color monitors will also drive the demand for color hard copy in the business graphics market place. The availability of higher resolution screens is allowing color monitors to be easily used for both text and graphics applications in the office environment. During 1987, the sales of color monitors are expected to surpass the sales of monochrome monitors. Another major color hard copy market driver will be the color copier. In order to take advantage of the communications power of computer generated color output, multiple copies are required for distribution. Product introductions of a new generation of color copiers is now underway with additional introductions expected

Retention of the Hard-to-Employ. Perspectives on Training the Disadvantaged--The Hard-to-Employ. Personnel Services Review Series 2.

ERIC Educational Resources Information Center

Harrison, Don K.; Brown, Dorothy R.

Although calculated by various statistical methods, retention (in this monograph) refers to the time that a former hard core member stays on the job. These rates may be tallied from the first day of pre-vocational training at a center, from the first day of a plant's vestibule training, or the first day of work at the job site. The hard core need…

Dunk Tank Hits the Mark at Take Your Child To Work Day | Poster

Cancer.gov

By Carolynne Keenan, Contributing Writer Robin Winkler-Pickett has known Jim Cherry, Ph.D., scientific program director, and Craig Reynolds, Ph.D., director, Office of Scientific Operations, both NCI at Frederick, for many years. “We’ve been friends for a long time.” So when she heard about the chance to dunk each of them at Take Your Child to Work Day (TYCTWD) on June 25,

Taking Control Of Compliance

PubMed Central

KOBER, SCOTT

2007-01-01

The cost of biologic therapies adds urgency to the need to develop realistic compliance strategies. By engaging and educating both the physician and patient, some MCOs are working hard to address at what has always been a complicated and formidable issue. PMID:23319920

49 CFR 26.33 - What steps must a recipient take to address overconcentration of DBEs in certain types of work?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false What steps must a recipient take to address overconcentration of DBEs in certain types of work? 26.33 Section 26.33 Transportation Office of the Secretary of... What steps must a recipient take to address overconcentration of DBEs in certain types of work? (a) If...

Hard X-ray emission from the solar corona

NASA Astrophysics Data System (ADS)

Krucker, S.; Battaglia, M.; Cargill, P. J.; Fletcher, L.; Hudson, H. S.; MacKinnon, A. L.; Masuda, S.; Sui, L.; Tomczak, M.; Veronig, A. L.; Vlahos, L.; White, S. M.

2008-10-01

This review surveys hard X-ray emissions of non-thermal electrons in the solar corona. These electrons originate in flares and flare-related processes. Hard X-ray emission is the most direct diagnostic of electron presence in the corona, and such observations provide quantitative determinations of the total energy in the non-thermal electrons. The most intense flare emissions are generally observed from the chromosphere at footpoints of magnetic loops. Over the years, however, many observations of hard X-ray and even γ-ray emission directly from the corona have also been reported. These coronal sources are of particular interest as they occur closest to where the electron acceleration is thought to occur. Prior to the actual direct imaging observations, disk occultation was usually required to study coronal sources, resulting in limited physical information. Now RHESSI has given us a systematic view of coronal sources that combines high spatial and spectral resolution with broad energy coverage and high sensitivity. Despite the low density and hence low bremsstrahlung efficiency of the corona, we now detect coronal hard X-ray emissions from sources in all phases of solar flares. Because the physical conditions in such sources may differ substantially from those of the usual “footpoint” emission regions, we take the opportunity to revisit the physics of hard X-radiation and relevant theories of particle acceleration.

A Modified Theoretical Model of Intrinsic Hardness of Crystalline Solids

PubMed Central

Dai, Fu-Zhi; Zhou, Yanchun

2016-01-01

Super-hard materials have been extensively investigated due to their practical importance in numerous industrial applications. To stimulate the design and exploration of new super-hard materials, microscopic models that elucidate the fundamental factors controlling hardness are desirable. The present work modified the theoretical model of intrinsic hardness proposed by Gao. In the modification, we emphasize the critical role of appropriately decomposing a crystal to pseudo-binary crystals, which should be carried out based on the valence electron population of each bond. After modification, the model becomes self-consistent and predicts well the hardness values of many crystals, including crystals composed of complex chemical bonds. The modified model provides fundamental insights into the nature of hardness, which can facilitate the quest for intrinsic super-hard materials. PMID:27604165

Work-ability evaluation: a piece of cake or a hard nut to crack?

PubMed

Slebus, Frans G; Sluiter, Judith K; Kuijer, P Paul F M; Willems, J Han H B M; Frings-Dresen, Monique H W

2007-08-30

To describe what aspects, categorized according to the ICF model, insurance physicians (IPs) take into account in assessing short- and long-term work-ability. An interview study on a random sample of 60 IPs of the Dutch National Institute for Employee Benefit Schemes, stratified by region and years of experience. In determining work-ability, a wide range of aspects were used. In the case of musculoskeletal disease, 75% of the IPs considered the 'function and structures' component important. With psychiatric and other diseases, however, the 'participation factor' component was considered important by 85 and 80%, respectively. Aspects relating to the 'environmental factor' and 'personal factor' components were mentioned as important by fewer than 25%. In assessing the short- and long-term prognosis of work-ability, the 'disease or disorder' component was primarily used with a rate of over 75%. In determining work-ability, insurance physicians predominantly consider aspects relating to the 'functions and structures' and 'participation' components of the ICF model important. The 'environmental factor' and 'personal factor' components were not often mentioned. In assessing the short- and long-term prognosis of work-ability, the 'disease or disorder' component was predominantly used. It can be argued that 'environmental factors' and 'personal factors' should also more often be used in assessing work-ability.

Structural and electronic properties of OsB2 : A hard metallic material

NASA Astrophysics Data System (ADS)

Chen, Z. Y.; Xiang, H. J.; Yang, Jinlong; Hou, J. G.; Zhu, Qingshi

2006-07-01

We calculate the structural and electronic properties of OsB2 using density functional theory with or without taking into account the spin-orbit (SO) interaction. Our results show that the bulk modulus with and without SO interactions are 364 and 365GPa , respectively, both are in good agreement with experiment (365-395GPa) . The evidence of covalent bonding of Os-B, which plays an important role to form a hard material, is indicated both in charge density, atoms in molecules analysis, and density of states analysis. The good metallicity and hardness of OsB2 might suggest its potential application as hard conductors.

Take Your Child to Work Day Shows Children that Science Is Fun | Poster

Cancer.gov

There’s still time to register your child for NCI at Frederick’s annual Take Your Child to Work Day, which will be held on Wednesday, June 27. Children who attend will be able to choose from nearly 30 activities this year. Several programs are scheduled to occur at various locations throughout the day, while others will be open on a “come as you please” basis all day long.

The hard fall effect: high working memory capacity leads to a higher, but less robust short-term memory performance.

PubMed

Thomassin, Noémylle; Gonthier, Corentin; Guerraz, Michel; Roulin, Jean-Luc

2015-01-01

Participants with a high working memory span tend to perform better than low spans in a variety of tasks. However, their performance is paradoxically more impaired when they have to perform two tasks at once, a phenomenon that could be labeled the "hard fall effect." The present study tested whether this effect exists in a short-term memory task, and investigated the proposal that the effect is due to high spans using efficient facilitative strategies under simple task conditions. Ninety-eight participants performed a spatial short-term memory task under simple and dual task conditions; stimuli presentation times either allowed for the use of complex facilitative strategies or not. High spans outperformed low spans only under simple task conditions when presentation times allowed for the use of facilitative strategies. These results indicate that the hard fall effect exists on a short-term memory task and may be caused by individual differences in strategy use.

Effects of calcium and magnesium hardness on the fertilization and hatching success of channel X blue hybrid catfish eggs

USDA-ARS?s Scientific Manuscript database

The aquifer used for hybrid catfish hatcheries is less than 10 mg/L of calcium hardness and 1- 25 mg/L of magnesium hardness. Embryonic development is deemed to be the most sensitive stage in the life cycle of a teleost. As egg development takes outside the fish’s body, water hardness is one abioti...

Simple and accurate theory for strong shock waves in a dense hard-sphere fluid.

PubMed

Montanero, J M; López de Haro, M; Santos, A; Garzó, V

1999-12-01

Following an earlier work by Holian et al. [Phys. Rev. E 47, R24 (1993)] for a dilute gas, we present a theory for strong shock waves in a hard-sphere fluid described by the Enskog equation. The idea is to use the Navier-Stokes hydrodynamic equations but taking the temperature in the direction of shock propagation rather than the actual temperature in the computation of the transport coefficients. In general, for finite densities, this theory agrees much better with Monte Carlo simulations than the Navier-Stokes and (linear) Burnett theories, in contrast to the well-known superiority of the Burnett theory for dilute gases.

Comparison of surface roughness and chip characteristics obtained under different modes of lubrication during hard turning of AISI H13 tool work steel.

NASA Astrophysics Data System (ADS)

Raj, Anil; Wins, K. Leo Dev; Varadarajan, A. S.

2016-09-01

Surface roughness is one of the important parameters, which not only affects the service life of a component but also serves as a good index of machinability. Near Dry Machining, methods (NDM) are considered as sustainable alternative for workshops trying to bring down their dependence on cutting fluids and the hazards associated with their indiscriminate usage. The present work presents a comparison of the surface roughness and chip characteristics during hard turning of AISI H13 tool work steel using hard metal inserts under two popular NDM techniques namely the minimal fluid application and the Minimum Quantity Lubrication technique(MQL) using an experiment designed based on Taguchi's techniques. The statistical method of analysis of variance (ANOVA) was used to determine the relative significance of input parameters consisting of cutting speed, feed and depth of cut on the attainable surface finish and the chip characteristics. It was observed that the performance during minimal fluid application was better than that during MQL application.

Understanding the bond-energy, hardness, and adhesive force from the phase diagram via the electron work function

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, Hao; Huang, Xiaochen; Li, Dongyang, E-mail: dongyang.li@ualberta.ca

2014-11-07

Properties of metallic materials are intrinsically determined by their electron behavior. However, relevant theoretical treatment involving quantum mechanics is complicated and difficult to be applied in materials design. Electron work function (EWF) has been demonstrated to be a simple but fundamental parameter which well correlates properties of materials with their electron behavior and could thus be used to predict material properties from the aspect of electron activities in a relatively easy manner. In this article, we propose a method to extract the electron work functions of binary solid solutions or alloys from their phase diagrams and use this simple approachmore » to predict their mechanical strength and surface properties, such as adhesion. Two alloys, Fe-Ni and Cu-Zn, are used as samples for the study. EWFs extracted from phase diagrams show same trends as experimentally observed ones, based on which hardness and surface adhesive force of the alloys are predicted. This new methodology provides an alternative approach to predict material properties based on the work function, which is extractable from the phase diagram. This work may also help maximize the power of phase diagram for materials design and development.« less

Gender bias torture in place of work.

PubMed

Pathak, P R

1999-11-01

Gender bias torture specially sexual harassment of women at the work place is now a hard reality, the ultimate form of control that repressed men, especially those in position of authority, can have today. They are generally being allowed to get away with it. Mainly because women are fearful and totally unorganized, managements are complacent and the law takes much too long to work if it ever does. Global picture is horrifying. Child abuse, women abuse and even some men are sexually abused. The fear of loss of job, hostility at work and social stigma still prevent women from complaining about sexual harassment. It has been recognized as human rights violation by the Supreme Court which has even drawn up legally binding guidelines directing employers to implement preventive and remedial measures in the work place.

Take Your Child to Work Day Helps Lure a Future Generation of Scientists | Poster

Cancer.gov

Young children often enjoy playing with dogs or cuddling with cats at home, but at Take Your Child to Work Day, kids of all ages had the opportunity to brush horses, pet alpacas, and observe laboratory mice, fish, and frogs. On June 29, the annual event provided 187 children of NCI at Frederick staff a variety of hands-on learning opportunities.

Family Practitioners' Advice about Taking Time Off Work for Lower Respiratory Tract Infections: A Prospective Study in Twelve European Primary Care Networks.

PubMed

Godycki-Cwirko, Maciek; Nocun, Marek; Butler, Christopher C; Little, Paul; Verheij, Theo; Hood, Kerenza; Fleten, Nils; Kowalczyk, Anna; Melbye, Hasse

2016-01-01

Acute cough and lower respiratory tract infections (LRTIs) are one of the most important causes of lost working hours. to explore variation and predictors in family practitioners (FPs) advice to patients with LRTIs about taking time off work in different European countries. Prospective observational study in primary care networks in 12 countries, with multilevel mixed-effects binomial logistic regression. 324 FPs recruited 1616 employed adults who presented to primary care with LRTIs. The proportion of patients advised to take time off work varied from 7.6% in the Netherlands to 89.2% in Slovakia, and of these, 88.2% overall were advised to stay off work for seven days or less. None of Finnish or Dutch patients were advised to take more than 7 days off, in contrast to 35.5% of Polish and 27.0% of Slovak patients. The strongest predictors of FPs' advice about time off work were: patient symptoms interfering with normal activities (OR 4.43; P<0.001), fever (2.49; P<0.001), patients feeling generally unwell (2.21; P<0.001), antibiotic prescribing (1.51; P = 0.025) and auscultation abnormality (1.50; P = 0.029). Advice to take time off was not associated with patient reported recovery. There is large variation in FPs' advice given to patients with LRTIs in Europe about taking time off work, which is not explained by differences in patients' reported illness duration, but might be explained by differences in regulations around certification and sick pay. Evidence based guidance for advising patients about taking time off work for this common condition is needed.

Hard sphere packings within cylinders.

PubMed

Fu, Lin; Steinhardt, William; Zhao, Hao; Socolar, Joshua E S; Charbonneau, Patrick

2016-03-07

Arrangements of identical hard spheres confined to a cylinder with hard walls have been used to model experimental systems, such as fullerenes in nanotubes and colloidal wire assembly. Finding the densest configurations, called close packings, of hard spheres of diameter σ in a cylinder of diameter D is a purely geometric problem that grows increasingly complex as D/σ increases, and little is thus known about the regime for D > 2.873σ. In this work, we extend the identification of close packings up to D = 4.00σ by adapting Torquato-Jiao's adaptive-shrinking-cell formulation and sequential-linear-programming (SLP) technique. We identify 17 new structures, almost all of them chiral. Beyond D ≈ 2.85σ, most of the structures consist of an outer shell and an inner core that compete for being close packed. In some cases, the shell adopts its own maximum density configuration, and the stacking of core spheres within it is quasiperiodic. In other cases, an interplay between the two components is observed, which may result in simple periodic structures. In yet other cases, the very distinction between the core and shell vanishes, resulting in more exotic packing geometries, including some that are three-dimensional extensions of structures obtained from packing hard disks in a circle.

Hard and soft acids and bases: atoms and atomic ions.

PubMed

Reed, James L

2008-07-07

The structural origin of hard-soft behavior in atomic acids and bases has been explored using a simple orbital model. The Pearson principle of hard and soft acids and bases has been taken to be the defining statement about hard-soft behavior and as a definition of chemical hardness. There are a number of conditions that are imposed on any candidate structure and associated property by the Pearson principle, which have been exploited. The Pearson principle itself has been used to generate a thermodynamically based scale of relative hardness and softness for acids and bases (operational chemical hardness), and a modified Slater model has been used to discern the electronic origin of hard-soft behavior. Whereas chemical hardness is a chemical property of an acid or base and the operational chemical hardness is an experimental measure of it, the absolute hardness is a physical property of an atom or molecule. A critical examination of chemical hardness, which has been based on a more rigorous application of the Pearson principle and the availability of quantitative measures of chemical hardness, suggests that the origin of hard-soft behavior for both acids and bases resides in the relaxation of the electrons not undergoing transfer during the acid-base interaction. Furthermore, the results suggest that the absolute hardness should not be taken as synonymous with chemical hardness but that the relationship is somewhat more complex. Finally, this work provides additional groundwork for a better understanding of chemical hardness that will inform the understanding of hardness in molecules.

High resolution imaging and lithography with hard x rays using parabolic compound refractive lenses

NASA Astrophysics Data System (ADS)

Schroer, C. G.; Benner, B.; Günzler, T. F.; Kuhlmann, M.; Zimprich, C.; Lengeler, B.; Rau, C.; Weitkamp, T.; Snigirev, A.; Snigireva, I.; Appenzeller, J.

2002-03-01

Parabolic compound refractive lenses are high quality optical components for hard x rays. They are particularly suited for full field imaging, with applications in microscopy and x-ray lithography. Taking advantage of the large penetration depth of hard x rays, the interior of opaque samples can be imaged with submicrometer resolution. To obtain the three-dimensional structure of a sample, microscopy is combined with tomographic techniques. In a first hard x-ray lithography experiment, parabolic compound refractive lenses have been used to project the reduced image of a lithography mask onto a resist. Future developments are discussed.

Stronger Working Memory Reduces Sexual Risk taking in Adolescents, Even After Controlling for Parental Influences

PubMed Central

Khurana, Atika; Romer, Daniel; Betancourt, Laura M.; Brodsky, Nancy L.; Giannetta, Joan M.; Hurt, Hallam

2015-01-01

This study examined the prospective influence of adolescent working memory (WM) on changes in impulsivity and sexual risk taking and assessed whether this relation could be explained by confounding effects of parental influences. Data from 360 community adolescents (Mage=13.5±0.95years; 52% female; 56% non-Hispanic White; low-mid SES; recruited from Philadelphia area in 2004–2005) were analyzed using structural equation modeling to predict changes in impulsivity and sexual risk taking over a two-year follow-up, using baseline assessments of WM, parental monitoring, parental involvement, and socioeconomic status. Stronger WM predicted reduced involvement in sexual risk taking at follow-up, effects channeled through changes in impulsivity dimensions of ‘acting without thinking’ and ‘inability to delay gratification’. Parental variables had a protective influence on adolescent impulsivity and risk involvement, but the effects of WM operated independently of parental influences. PMID:26081926

Transport coefficients and mechanical response in hard-disk colloidal suspensions

NASA Astrophysics Data System (ADS)

Zhang, Bo-Kai; Li, Jian; Chen, Kang; Tian, Wen-De; Ma, Yu-Qiang

2016-11-01

We investigate the transport properties and mechanical response of glassy hard disks using nonlinear Langevin equation theory. We derive expressions for the elastic shear modulus and viscosity in two dimensions on the basis of thermal-activated barrier-hopping dynamics and mechanically accelerated motion. Dense hard disks exhibit phenomena such as softening elasticity, shear-thinning of viscosity, and yielding upon deformation, which are qualitatively similar to dense hard-sphere colloidal suspensions in three dimensions. These phenomena can be ascribed to stress-induced “landscape tilting”. Quantitative comparisons of these phenomena between hard disks and hard spheres are presented. Interestingly, we find that the density dependence of yield stress in hard disks is much more significant than in hard spheres. Our work provides a foundation for further generalizing the nonlinear Langevin equation theory to address slow dynamics and rheological behavior in binary or polydisperse mixtures of hard or soft disks. Project supported by the National Basic Research Program of China (Grant No. 2012CB821500) and the National Natural Science Foundation of China (Grant Nos. 21374073 and, 21574096).

Statistical theory of correlations in random packings of hard particles.

PubMed

Jin, Yuliang; Puckett, James G; Makse, Hernán A

2014-05-01

A random packing of hard particles represents a fundamental model for granular matter. Despite its importance, analytical modeling of random packings remains difficult due to the existence of strong correlations which preclude the development of a simple theory. Here, we take inspiration from liquid theories for the n-particle angular correlation function to develop a formalism of random packings of hard particles from the bottom up. A progressive expansion into a shell of particles converges in the large layer limit under a Kirkwood-like approximation of higher-order correlations. We apply the formalism to hard disks and predict the density of two-dimensional random close packing (RCP), ϕ(rcp) = 0.85 ± 0.01, and random loose packing (RLP), ϕ(rlp) = 0.67 ± 0.01. Our theory also predicts a phase diagram and angular correlation functions that are in good agreement with experimental and numerical data.

Preventing Abuse of Deaf and Hard of Hearing Children: What Teachers Can Do

ERIC Educational Resources Information Center

Johnson, Jennifer A. L.

2018-01-01

Jennifer Johnson discusses her work with the American College Educators-Deaf and Hard of Hearing (ACE-DHH) group to address maltreatment of children with communicative disabilities and deafness. The ACE-DHH Child Maltreatment Work Group has targeted two documents in which the inclusion of safety statements could protect deaf and hard of hearing…

Brownian versus Newtonian devitrification of hard-sphere glasses

NASA Astrophysics Data System (ADS)

Montero de Hijes, Pablo; Rosales-Pelaez, Pablo; Valeriani, Chantal; Pusey, Peter N.; Sanz, Eduardo

2017-08-01

In a recent molecular dynamics simulation work it has been shown that glasses composed of hard spheres crystallize via cooperative, stochastic particle displacements called avalanches [E. Sanz et al., Proc. Natl. Acad. Sci. USA 111, 75 (2014), 10.1073/pnas.1308338110]. In this Rapid Communication we investigate if such a devitrification mechanism is also present when the dynamics is Brownian rather than Newtonian. The research is motivated in part by the fact that colloidal suspensions, an experimental realization of hard-sphere systems, undergo Brownian motion. We find that Brownian hard-sphere glasses do crystallize via avalanches with very similar characteristics to those found in the Newtonian case. We briefly discuss the implications of these findings for experiments on colloids.

Put Your Science to Work: The Take-Charge Career Guide for Scientists

NASA Astrophysics Data System (ADS)

Fiske, Peter S.

This is the first of an occasional column in which the author or authors of a book recently published byAGU will be interviewed and their new book discussed.In this issue, Eos talks with Peter S. Fiske, the author of Put Your Science to Work: The Take-Charge Career Guide for Scientists. This is an update to his 1996 best-seller, To Boldly Go: A Practical Career Guide for Scientists, which became a best-seller for its comprehensive, hands-on guidance to scientists and scientistsin-training about the full range of professional opportunties open to them—including non-traditional ones—and how best to achieve success in them.

Hard-Wired for Innovation? Comparing Two Policy Paths toward Innovative Schooling

ERIC Educational Resources Information Center

Ellison, Scott

2009-01-01

The task of this study is to compare two policy approaches to fostering, or "hard-wiring," educational innovation in public schooling: the marketplace approach and the Finnish approach. The results suggest that an innovative public education sector is characterized by decentralized decision-making, institutional space for risk-taking,…

Dunk Tank Hits the Mark at Take Your Child To Work Day | Poster

Cancer.gov

By Carolynne Keenan, Contributing Writer Robin Winkler-Pickett has known Jim Cherry, Ph.D., scientific program director, and Craig Reynolds, Ph.D., director, Office of Scientific Operations, both NCI at Frederick, for many years. “We’ve been friends for a long time.” So when she heard about the chance to dunk each of them at Take Your Child to Work Day (TYCTWD) on June 25, Winkler-Pickett, a research biologist in the Laboratory of Experimental Immunology, NCI Center for Cancer Research, knew she had to make time to participate.

Early Intervention: A Multicultural Perspective on d/Deaf and Hard of Hearing Multilingual Learners.

PubMed

Sandy, K Bowen

2016-01-01

Today's pluralistic society is characterized by families from many linguistic and cultural backgrounds, including families with infants and toddlers who are deaf or hard of hearing (d/Dhh). Taking a multicultural perspective, the author examines family-centered early intervention (FCEI) and the transition to school services for children who are d/Dhh. Working with d/Dhh Multilingual Learners (DMLs) and their families presents a unique challenge to early intervention professionals: ensuring that families have adequate information and resources to make informed choices, particularly regarding communication. The author presents information and research related to (a) family and professional partnerships, (b) cultural contexts for early intervention, (c) family communication decisions and linguistic diversity, (d) emerging research on DMLs, (e) considerations for early intervention providers and interpreters who work with culturally and linguistically diverse d/Dhh infants and toddlers, and (f) cultural reflections on ensuring smooth transitions from early intervention into preschool programs.

Hard X-ray Emission along the Z Track in GX 17 + 2

NASA Astrophysics Data System (ADS)

Ding, G. Q.; Huang, C. P.

2015-09-01

Using the data from the Proportional Counter Array (PCA) and the High-Energy X-ray Timing Experiment (HEXTE) on board Rossi X-Ray Timing Explorer for Z source GX 17 + 2, we investigate the evolution of its PCA spectra and HEXTE spectra along a `Z' track on its hardness-intensity diagram. A hard X-ray tail is detected in the HEXTE spectra. The detected hard X-ray tails are discontinuously scattered throughout the Z track. The found hard X-ray tail hardens from the horizontal branch, through the normal branch, to the flaring branch in principle and it contributes ˜(20-50)% of the total flux in 20-200 keV. Our joint fitting results of the PCA + HEXTE spectra in 3-200 keV show that the portion of Comptonization in the Bulk-Motion Comptonization (BMC) model accounts for the hard X-ray tail, which indicates that the BMC process could be responsible for the detected hard tail. The temperature of the seed photons for BMC is ˜2.7 keV, implying that these seed photons might be emitted from the surface of the neutron star (NS) or the boundary layer between the NS and the disk and, therefore, this process could take place around the NS or in the boundary layer.

Successful engagement: CBM's holistic approach to the work in the area of ear care, deafness, hard of hearing and deafblindness.

PubMed

Tesni, Sian; Santana-Hernández, Diego

2014-09-01

CBM is an international Christian development organisation, committed to improving the quality of life of persons with disabilities in disadvantaged societies. CBM aims at achieving this in partnership with local organisations and in cooperation with stakeholders at regional and international levels. This article aims at sharing CBM's holistic approach for successful engagement in the work area of ear care, deafness, hard of hearing and deafblindness. Review of CBM supporting documents, including strategies, position papers, technical guidelines, criteria of success and information related to partners, centres of excellence and model projects. Description of how partner programmes use participatory methods of planning and implementation, involving persons with disabilities and the community. Recommendations on how to develop national or sub-national strategies to impact the lives, and advocate with governments for the rights and inclusion, of persons with disabilities. CBM's holistic approach to work in the area of ear care; deafness; hard of hearing and deafblindness includes intervention at all levels of health care provision, Education, CBR and Audiological, Speech Therapy and other interdisciplinary services. This article presents CBM's core principles and shares specific strategic planning and results, together with lessons learnt while searching a sustainable engagement for field work. Rehabilitation, in its widest conception, should be approached as a multidisciplinary strategy, and developed in close cooperation with other local, national and international agencies. CBM is positioned in a strategic point from where it can play a key role in the facilitation of an international forum for agencies and stakeholders to reach a consensus to decrease the burden of ear disease and hearing loss, through early intervention and re/habilitation.

Investigation of Specificity of Mechanical Properties of Hard Materials on Nanoscale with Use of SPM- Nanohardness Tester

NASA Astrophysics Data System (ADS)

Lvova, N. A.; Blank, V. D.; Gogolinskiy, K. V.; Kulibaba, V. F.

2007-04-01

Specifisities of deformation on nanoscale of hard brittle materials with the hardness exceeding 10 GP by means of scanning probe microscope - nanohardness tester "NanoScan" are investigated. It is found, that pile-up is forming at scratching of sample surface with use of diamond indenter. Heigh of this pile-up depends on hardness and elastic modulus of the material. Definition of the contact area without taking into account height of pile-up leads to an overestimation of hardness values. At scratching of silicon carbide surface a transition from plastic flow to fracture is found out. The results received allowed to estimate fracture toughness KIC for silicon carbide.

Relative hardness measurement of soft objects by a new fiber optic sensor

NASA Astrophysics Data System (ADS)

Ahmadi, Roozbeh; Ashtaputre, Pranav; Abou Ziki, Jana; Dargahi, Javad; Packirisamy, Muthukumaran

2010-06-01

The measurement of relative hardness of soft objects enables replication of human finger tactile perception capabilities. This ability has many applications not only in automation and robotics industry but also in many other areas such as aerospace and robotic surgery where a robotic tool interacts with a soft contact object. One of the practical examples of interaction between a solid robotic instrument and a soft contact object occurs during robotically-assisted minimally invasive surgery. Measuring the relative hardness of bio-tissue, while contacting the robotic instrument, helps the surgeons to perform this type of surgery more reliably. In the present work, a new optical sensor is proposed to measure the relative hardness of contact objects. In order to measure the hardness of a contact object, like a human finger, it is required to apply a small force/deformation to the object by a tactile sensor. Then, the applied force and resulting deformation should be recorded at certain points to enable the relative hardness measurement. In this work, force/deformation data for a contact object is recorded at certain points by the proposed optical sensor. Recorded data is used to measure the relative hardness of soft objects. Based on the proposed design, an experimental setup was developed and experimental tests were performed to measure the relative hardness of elastomeric materials. Experimental results verify the ability of the proposed optical sensor to measure the relative hardness of elastomeric samples.

Evaluation of HardSys/HardDraw, An Expert System for Electromagnetic Interactions Modelling

DTIC Science & Technology

1993-05-01

interactions ir complex systems. This report gives a description of HardSys/HardDraw and reviews the main concepts used in its design. Various aspects of its ...HardDraw, an expert system for the modelling of electromagnetic interactions in complex systems. It consists of two main components: HardSys and HardDraw...HardSys is the advisor part of the expert system. It is knowledge-based, that is it contains a database of models and properties for various types of

Do Work Beliefs Moderate the Relationship Between Work Interruptions, Wellbeing and Psychosomatic Symptoms?

PubMed Central

Zoupanou, Zoi(e); Rydstedt, Leif W.

2017-01-01

The purpose of this study was to explore the moderating effects of work beliefs in the relationship between work interruptions and general health, wellbeing and reports of psychosomatic symptoms. Self-report data were gathered from 310 employees from different occupational sectors. Results revealed that beliefs in hard work and morality ethic moderated the positive appraisal of work interruptions and acted as protective factors on impaired general health and wellbeing. The relationship was stronger among employees who endorsed strong beliefs in hard work and did not have regard for morality/ethics as a value. Likewise, beliefs in delay of gratification and morality/ethics moderated positive appraisal of work interruptions and reduced psychosomatic complaints. More specifically, the relationship was stronger among employees who had strong belief in the values of delayed gratification and weaker morality/ethics. These findings indicate that organisations should adopt work ideology or practices focused on work values particularly of hard work, delay of gratification and conformity to morality as protective factors that reduce the impact of work interruptions on employees’ general health and wellbeing. PMID:28580023

Bond-orientational analysis of hard-disk and hard-sphere structures.

PubMed

Senthil Kumar, V; Kumaran, V

2006-05-28

We report the bond-orientational analysis results for the thermodynamic, random, and homogeneously sheared inelastic structures of hard-disks and hard-spheres. The thermodynamic structures show a sharp rise in the order across the freezing transition. The random structures show the absence of crystallization. The homogeneously sheared structures get ordered at a packing fraction higher than the thermodynamic freezing packing fraction, due to the suppression of crystal nucleation. On shear ordering, strings of close-packed hard-disks in two dimensions and close-packed layers of hard-spheres in three dimensions, oriented along the velocity direction, slide past each other. Such a flow creates a considerable amount of fourfold order in two dimensions and body-centered-tetragonal (bct) structure in three dimensions. These transitions are the flow analogs of the martensitic transformations occurring in metals due to the stresses induced by a rapid quench. In hard-disk structures, using the bond-orientational analysis we show the presence of fourfold order. In sheared inelastic hard-sphere structures, even though the global bond-orientational analysis shows that the system is highly ordered, a third-order rotational invariant analysis shows that only about 40% of the spheres have face-centered-cubic (fcc) order, even in the dense and near-elastic limits, clearly indicating the coexistence of multiple crystalline orders. When layers of close-packed spheres slide past each other, in addition to the bct structure, the hexagonal-close-packed (hcp) structure is formed due to the random stacking faults. Using the Honeycutt-Andersen pair analysis and an analysis based on the 14-faceted polyhedra having six quadrilateral and eight hexagonal faces, we show the presence of bct and hcp signatures in shear ordered inelastic hard-spheres. Thus, our analysis shows that the dense sheared inelastic hard-spheres have a mixture of fcc, bct, and hcp structures.

Hard decoding algorithm for optimizing thresholds under general Markovian noise

NASA Astrophysics Data System (ADS)

Chamberland, Christopher; Wallman, Joel; Beale, Stefanie; Laflamme, Raymond

2017-04-01

Quantum error correction is instrumental in protecting quantum systems from noise in quantum computing and communication settings. Pauli channels can be efficiently simulated and threshold values for Pauli error rates under a variety of error-correcting codes have been obtained. However, realistic quantum systems can undergo noise processes that differ significantly from Pauli noise. In this paper, we present an efficient hard decoding algorithm for optimizing thresholds and lowering failure rates of an error-correcting code under general completely positive and trace-preserving (i.e., Markovian) noise. We use our hard decoding algorithm to study the performance of several error-correcting codes under various non-Pauli noise models by computing threshold values and failure rates for these codes. We compare the performance of our hard decoding algorithm to decoders optimized for depolarizing noise and show improvements in thresholds and reductions in failure rates by several orders of magnitude. Our hard decoding algorithm can also be adapted to take advantage of a code's non-Pauli transversal gates to further suppress noise. For example, we show that using the transversal gates of the 5-qubit code allows arbitrary rotations around certain axes to be perfectly corrected. Furthermore, we show that Pauli twirling can increase or decrease the threshold depending upon the code properties. Lastly, we show that even if the physical noise model differs slightly from the hypothesized noise model used to determine an optimized decoder, failure rates can still be reduced by applying our hard decoding algorithm.

Hard and soft age discrimination: the dual nature of workplace discrimination.

PubMed

Stypinska, Justyna; Turek, Konrad

2017-03-01

The paper concentrates on the problem of age discrimination in the labour market and the way it can be conceptualised and measured in a multi-disciplinary way. The approach proposed here combines two understandings of age discrimination-a sociological and legal one, what allows for a fuller and expanded understanding of ageism in the workplace. At the heart of the study is a survey carried out in Poland with a sample of 1000 men and women aged 45-65 years. The study takes a deeper and innovative look into the issue of age discrimination in employment. Confirmatory factor analysis with WLSMV estimation and logistic regressions were used to test the hypotheses. The study shows that age discrimination in labour market can take on different forms: hard and soft, where the hard type of age discrimination mirrors the legally prohibited types of behaviours and those which relate to the actual decisions of employers which can impact on the employee's career development. The soft discrimination corresponds with those occurrences, which are not inscribed in the legal system per se, are occurring predominantly in the interpersonal sphere, but can nevertheless have negative consequences. Soft discrimination was experienced more often (28.6% of respondents) than hard discrimination (15.7%) with higher occurrences among women, persons in precarious job situation or residents of urban areas. The role of education was not confirmed to influence the levels of perceived age discrimination.

Co-electrodeposition of hard Ni-W/diamond nanocomposite coatings

PubMed Central

Zhang, Xinyu; Qin, Jiaqian; Das, Malay Kumar; Hao, Ruru; Zhong, Hua; Thueploy, Adisak; Limpanart, Sarintorn; Boonyongmaneerat, Yuttanant; Ma, Mingzhen; Liu, Riping

2016-01-01

Electroplated hard chrome coating is widely used as a wear resistant coating to prolong the life of mechanical components. However, the electroplating process generates hexavalent chromium ion which is known carcinogen. Hence, there is a major effort throughout the electroplating industry to replace hard chrome coating. Composite coating has been identified as suitable materials for replacement of hard chrome coating, while deposition coating prepared using traditional co-deposition techniques have relatively low particles content, but the content of particles incorporated into a coating may fundamentally affect its properties. In the present work, Ni-W/diamond composite coatings were prepared by sediment co-electrodeposition from Ni-W plating bath, containing suspended diamond particles. This study indicates that higher diamond contents could be successfully co-deposited and uniformly distributed in the Ni-W alloy matrix. The maximum hardness of Ni-W/diamond composite coatings is found to be 2249 ± 23 Hv due to the highest diamond content of 64 wt.%. The hardness could be further enhanced up to 2647 ± 25 Hv with heat treatment at 873 K for 1 h in Ar gas, which is comparable to hard chrome coatings. Moreover, the addition of diamond particles could significantly enhance the wear resistance of the coatings. PMID:26924136

Co-electrodeposition of hard Ni-W/diamond nanocomposite coatings.

PubMed

Zhang, Xinyu; Qin, Jiaqian; Das, Malay Kumar; Hao, Ruru; Zhong, Hua; Thueploy, Adisak; Limpanart, Sarintorn; Boonyongmaneerat, Yuttanant; Ma, Mingzhen; Liu, Riping

2016-02-29

Electroplated hard chrome coating is widely used as a wear resistant coating to prolong the life of mechanical components. However, the electroplating process generates hexavalent chromium ion which is known carcinogen. Hence, there is a major effort throughout the electroplating industry to replace hard chrome coating. Composite coating has been identified as suitable materials for replacement of hard chrome coating, while deposition coating prepared using traditional co-deposition techniques have relatively low particles content, but the content of particles incorporated into a coating may fundamentally affect its properties. In the present work, Ni-W/diamond composite coatings were prepared by sediment co-electrodeposition from Ni-W plating bath, containing suspended diamond particles. This study indicates that higher diamond contents could be successfully co-deposited and uniformly distributed in the Ni-W alloy matrix. The maximum hardness of Ni-W/diamond composite coatings is found to be 2249 ± 23 Hv due to the highest diamond content of 64 wt.%. The hardness could be further enhanced up to 2647 ± 25 Hv with heat treatment at 873 K for 1 h in Ar gas, which is comparable to hard chrome coatings. Moreover, the addition of diamond particles could significantly enhance the wear resistance of the coatings.

Co-electrodeposition of hard Ni-W/diamond nanocomposite coatings

NASA Astrophysics Data System (ADS)

Zhang, Xinyu; Qin, Jiaqian; Das, Malay Kumar; Hao, Ruru; Zhong, Hua; Thueploy, Adisak; Limpanart, Sarintorn; Boonyongmaneerat, Yuttanant; Ma, Mingzhen; Liu, Riping

2016-02-01

Electroplated hard chrome coating is widely used as a wear resistant coating to prolong the life of mechanical components. However, the electroplating process generates hexavalent chromium ion which is known carcinogen. Hence, there is a major effort throughout the electroplating industry to replace hard chrome coating. Composite coating has been identified as suitable materials for replacement of hard chrome coating, while deposition coating prepared using traditional co-deposition techniques have relatively low particles content, but the content of particles incorporated into a coating may fundamentally affect its properties. In the present work, Ni-W/diamond composite coatings were prepared by sediment co-electrodeposition from Ni-W plating bath, containing suspended diamond particles. This study indicates that higher diamond contents could be successfully co-deposited and uniformly distributed in the Ni-W alloy matrix. The maximum hardness of Ni-W/diamond composite coatings is found to be 2249 ± 23 Hv due to the highest diamond content of 64 wt.%. The hardness could be further enhanced up to 2647 ± 25 Hv with heat treatment at 873 K for 1 h in Ar gas, which is comparable to hard chrome coatings. Moreover, the addition of diamond particles could significantly enhance the wear resistance of the coatings.

Are Your IT Staff Working Too Hard?

ERIC Educational Resources Information Center

Oxley, Alan

2008-01-01

How do IT managers protect their staff from working excessively long hours? To begin addressing the problem of overworked staff, IT managers should educate themselves about legal regulations governing time spent at work. Failure to meet such requirements can expose a university to potentially expensive and embarrassing lawsuits. In this article,…

Hardness - Yield Strength Relation of Al-Mg-Si Alloys

NASA Astrophysics Data System (ADS)

Praveen Sekhar, Aluru; Nandy, Supriya; Ray, Kalyan Kumar; Das, Debdulal

2018-03-01

Assessing the mechanical properties of materials through indentation hardness test is an attractive method, rather than obtaining the properties through destructive approach like tensile testing. The present work emphasizes on the relation between hardness and yield strength of Al-Mg-Si alloys considering Tabor type equations. Al-0.5Mg-0.4Si alloy has been artificially aged at various temperatures (100 to 250 °C) for different time durations (0.083 to 1000 h) and the ageing response has been assessed by measuring the Vickers hardness and yield strength. Correlations of the existing data from the open literature have also been reviewed. Lastly, it has been explained that the deviation in obtained relation from Tabor’s equation is owing to the dislocation accumulation during indentation.

Kinetics of bed fracturing around mine workings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veksler, Yu.A.

1988-03-01

A failure of the bed near the walls of the workings of a mine away from the face occurs gradually over time and in this paper the authors take a kinetic approach to evaluating its development. The influence of certain mine engineering factors on the pattern of bed fracturing is discussed. The effect of the depth of mining is shown. Cracking occurs in the portion of the seam at the face near the ground at some distance from it on the interface between soft and hard coal. The density of the fractured rocks and their response affect the bed fracturingmore » near the stope face.« less

A lot of hard work, but doable: Pregnancy experiences of women with type-1 diabetes.

PubMed

McGrath, Meaghan; Chrisler, Joan C

2017-06-01

Despite many medical advances, pregnant women with type-1 diabetes are still considered to be at high risk. Previous research suggests that physicians' focus on strict glycemic control and negative outcomes can result in fear and uncertainty about undertaking pregnancy. The present study was designed to gain insight into the lived pregnancy experiences of women with type-1 diabetes and to solicit their thoughts on what health care providers could do to assist them to have a healthy pregnancy. Ten U.S. women with type-1 diabetes who were currently pregnant and/or had previously given birth participated in structured interviews. They described the hard work required to attain the strict glycemic control necessary during pregnancy to maintain their health and that of their fetus. However, they found diabetes and pregnancy to be a more positive and successful experience than they had anticipated. The results suggest that early diabetes education, pregnancy planning, and social support are important, yet often overlooked, factors that increase the likelihood of physically and emotionally successful pregnancy experiences for women with type-1 diabetes.

Delta-Isobar Production in the Hard Photodisintegration of a Deuteron

NASA Astrophysics Data System (ADS)

Granados, Carlos; Sargsian, Misak

2010-02-01

Hard photodisintegration of the deuteron in delta-isobar production channels is proposed as a useful process in identifying the quark structure of hadrons and of hadronic interactions at large momentum and energy transfer. The reactions are modeled using the hard re scattering model, HRM, following previous works on hard breakup of a nucleon nucleon (NN) system in light nuclei. Here,quantitative predictions through the HRM require the numerical input of fits of experimental NN hard elastic scattering cross sections. Because of the lack of data in hard NN scattering into δ-isobar channels, the cross section of the corresponding photodisintegration processes cannot be predicted in the same way. Instead, the corresponding NN scattering process is modeled through the quark interchange mechanism, QIM, leaving an unknown normalization parameter. The observables of interest are ratios of differential cross sections of δ-isobar production channels to NN breakup in deuteron photodisintegration. Both entries in these ratios are derived through the HRM and QIM so that normalization parameters cancel out and numerical predictions can be obtained. )

Radiation hardness of lead glasses TF1 and TF101

NASA Astrophysics Data System (ADS)

Kobayashi, Masaaki; Prokoshkin, Yuri; Singovsky, Alexandre; Takamatsu, Kunio

1994-06-01

We have measured the radiation hardness of two types of lead glasses, TF1 and TF101, for low energy γ-rays from 60Co. TF101 containing cerium is a few tens times radiation harder than TF1 which contains no cerium. The radiation hardness, or the tolerable accumulated dose, of TF101 is 2 × 10 3 rad when the degradation of the transmittance is required to be less than 1% for the unit radiation length X0 = 2.8 cm. When the present result is compared with the work of Inyakin et al., the radiation hardness of TF101 glass should be similar for both γ-rays and for high energy hadrons.

Using Social Network Analysis to Measure the Impact and Value of Work That Takes Us beyond Institutional Boundaries

ERIC Educational Resources Information Center

Cassidy, Alice; Poole, Gary

2016-01-01

In educational development, accountability is paramount, in particular for activities that take educational developers away from their institutional boundaries to local, national, and international venues. Educational developers must demonstrate the benefits of such work to the home institution and its constituents. We asked educational developers…

Remember Hard But Think Softly: Metaphorical Effects of Hardness/Softness on Cognitive Functions.

PubMed

Xie, Jiushu; Lu, Zhi; Wang, Ruiming; Cai, Zhenguang G

2016-01-01

Previous studies have found that bodily stimulation, such as hardness biases social judgment and evaluation via metaphorical association; however, it remains unclear whether bodily stimulation also affects cognitive functions, such as memory and creativity. The current study used metaphorical associations between "hard" and "rigid" and between "soft" and "flexible" in Chinese, to investigate whether the experience of hardness affects cognitive functions whose performance depends prospectively on rigidity (memory) and flexibility (creativity). In Experiment 1, we found that Chinese-speaking participants performed better at recalling previously memorized words while sitting on a hard-surface stool (the hard condition) than a cushioned one (the soft condition). In Experiment 2, participants sitting on a cushioned stool outperformed those sitting on a hard-surface stool on a Chinese riddle task, which required creative/flexible thinking, but not on an analogical reasoning task, which required both rigid and flexible thinking. The results suggest the hardness experience affects cognitive functions that are metaphorically associated with rigidity or flexibility. They support the embodiment proposition that cognitive functions and representations can be grounded in bodily states via metaphorical associations.

Radiation Hardness Assurance (RHA): Challenges and New Considerations

NASA Technical Reports Server (NTRS)

Campola, Michael J.

2017-01-01

Radiation Hardness Assurance (RHA) challenges associated with the use of commercial-off-the-shelf (COTS) components and emerging technologies are cause for risk acceptance in space flight missions. The RHA flow includes environment definition, hazard evaluation, requirements definition, evaluation of design, and design trades to accommodate the risk a project or program takes. The varied missions profiles and environments don't necessarily benefit from the same risk reduction efforts or cost reduction attempts. The level of effort within the RHA flow can be tailored to minimize risk based on the environment or design criticality.

Neuroscientists Find Learning Is Not "Hard-Wired"

ERIC Educational Resources Information Center

Sparks, Sarah D.

2012-01-01

Neuroscience exploded into the education conversation more than 20 years ago, in step with the evolution of personal computers and the rise of the Internet, and policymakers hoped medical discoveries could likewise help doctors and teachers understand the "hard wiring" of the brain. That conception of how the brain works, exacerbated by the…

Simple heuristic for the viscosity of polydisperse hard spheres

NASA Astrophysics Data System (ADS)

Farr, Robert S.

2014-12-01

We build on the work of Mooney [Colloids Sci. 6, 162 (1951)] to obtain an heuristic analytic approximation to the viscosity of a suspension any size distribution of hard spheres in a Newtonian solvent. The result agrees reasonably well with rheological data on monodispserse and bidisperse hard spheres, and also provides an approximation to the random close packing fraction of polydisperse spheres. The implied packing fraction is less accurate than that obtained by Farr and Groot [J. Chem. Phys. 131(24), 244104 (2009)], but has the advantage of being quick and simple to evaluate.

KENNEDY SPACE CENTER, FLA. - Children enjoy displays of security equipment during Take Our Children to Work Day. Employees were invited to share their work experience with their children on this annual event.

NASA Image and Video Library

2003-07-24

KENNEDY SPACE CENTER, FLA. - Children enjoy displays of security equipment during Take Our Children to Work Day. Employees were invited to share their work experience with their children on this annual event.

KENNEDY SPACE CENTER, FLA. - Children enjoy displays of fire equipment during Take Our Children to Work Day. Employees were invited to share their work experience with their children on this annual event.

NASA Image and Video Library

2003-07-24

KENNEDY SPACE CENTER, FLA. - Children enjoy displays of fire equipment during Take Our Children to Work Day. Employees were invited to share their work experience with their children on this annual event.

Computational search for rare-earth free hard-magnetic materials

NASA Astrophysics Data System (ADS)

Flores Livas, José A.; Sharma, Sangeeta; Dewhurst, John Kay; Gross, Eberhard; MagMat Team

2015-03-01

It is difficult to over state the importance of hard magnets for human life in modern times; they enter every walk of our life from medical equipments (NMR) to transport (trains, planes, cars, etc) to electronic appliances (for house hold use to computers). All the known hard magnets in use today contain rare-earth elements, extraction of which is expensive and environmentally harmful. Rare-earths are also instrumental in tipping the balance of world economy as most of them are mined in limited specific parts of the world. Hence it would be ideal to have similar characteristics as a hard magnet but without or at least with reduced amount of rare-earths. This is the main goal of our work: search for rare-earth-free magnets. To do so we employ a combination of density functional theory and crystal prediction methods. The quantities which define a hard magnet are magnetic anisotropy energy (MAE) and saturation magnetization (Ms), which are the quantities we maximize in search for an ideal magnet. In my talk I will present details of the computation search algorithm together with some potential newly discovered rare-earth free hard magnet. J.A.F.L. acknowledge financial support from EU's 7th Framework Marie-Curie scholarship program within the ``ExMaMa'' Project (329386).

30 CFR 75.1720-1 - Distinctively colored hard hats, or hard caps; identification for newly employed, inexperienced...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Distinctively colored hard hats, or hard caps... STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1720-1 Distinctively colored hard hats, or hard caps; identification for newly employed, inexperienced miners. Hard hats or hard caps distinctively different in color...

30 CFR 75.1720-1 - Distinctively colored hard hats, or hard caps; identification for newly employed, inexperienced...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Distinctively colored hard hats, or hard caps... STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1720-1 Distinctively colored hard hats, or hard caps; identification for newly employed, inexperienced miners. Hard hats or hard caps distinctively different in color...

30 CFR 75.1720-1 - Distinctively colored hard hats, or hard caps; identification for newly employed, inexperienced...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Distinctively colored hard hats, or hard caps... STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1720-1 Distinctively colored hard hats, or hard caps; identification for newly employed, inexperienced miners. Hard hats or hard caps distinctively different in color...

30 CFR 75.1720-1 - Distinctively colored hard hats, or hard caps; identification for newly employed, inexperienced...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Distinctively colored hard hats, or hard caps... STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1720-1 Distinctively colored hard hats, or hard caps; identification for newly employed, inexperienced miners. Hard hats or hard caps distinctively different in color...

30 CFR 75.1720-1 - Distinctively colored hard hats, or hard caps; identification for newly employed, inexperienced...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Distinctively colored hard hats, or hard caps... STANDARDS-UNDERGROUND COAL MINES Miscellaneous § 75.1720-1 Distinctively colored hard hats, or hard caps; identification for newly employed, inexperienced miners. Hard hats or hard caps distinctively different in color...

30 CFR 77.1710-1 - Distinctively colored hard hats or hard caps; identification for newly employed, inexperienced...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Distinctively colored hard hats or hard caps... Distinctively colored hard hats or hard caps; identification for newly employed, inexperienced miners. Hard hats or hard caps distinctively different in color from those worn by experienced miners shall be worn at...

30 CFR 77.1710-1 - Distinctively colored hard hats or hard caps; identification for newly employed, inexperienced...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Distinctively colored hard hats or hard caps... Distinctively colored hard hats or hard caps; identification for newly employed, inexperienced miners. Hard hats or hard caps distinctively different in color from those worn by experienced miners shall be worn at...

30 CFR 77.1710-1 - Distinctively colored hard hats or hard caps; identification for newly employed, inexperienced...

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Distinctively colored hard hats or hard caps... Distinctively colored hard hats or hard caps; identification for newly employed, inexperienced miners. Hard hats or hard caps distinctively different in color from those worn by experienced miners shall be worn at...

30 CFR 77.1710-1 - Distinctively colored hard hats or hard caps; identification for newly employed, inexperienced...

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Distinctively colored hard hats or hard caps... Distinctively colored hard hats or hard caps; identification for newly employed, inexperienced miners. Hard hats or hard caps distinctively different in color from those worn by experienced miners shall be worn at...

30 CFR 77.1710-1 - Distinctively colored hard hats or hard caps; identification for newly employed, inexperienced...

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Distinctively colored hard hats or hard caps... Distinctively colored hard hats or hard caps; identification for newly employed, inexperienced miners. Hard hats or hard caps distinctively different in color from those worn by experienced miners shall be worn at...

Experimental Study on the Relationship between Hardness and Principal Strain in Tube Hydroforming Process

NASA Astrophysics Data System (ADS)

Wang, G. D.; Chan, L. C.

2009-11-01

In order to find a feasible method to evaluate the deformation of tubes during the Tube Hydroforming (THF) process, the hardness and the strain in two selected deformation areas of hydro formed copper tubes (C11000) were measured and tested, and an instinct relationship was found between the hardness and the principal strains of the tubes. The major strain of the surface of tubes had the strongest linear relationship with hardness. A regression formula was used to describe the relationship between hardness and the sensitive strain which is defined in the present work as a dependent variable of major strain and thickness strain.

A Test of Black-Hole Disk Truncation: Thermal Disk Emission in the Bright Hard State

NASA Astrophysics Data System (ADS)

Steiner, James

2017-09-01

The assumption that a black hole's accretion disk extends inwards to the ISCO is on firm footing for soft spectral states, but has been challenged for hard spectral states where it is often argued that the accretion flow is truncated far from the horizon. This is of critical importance because black-hole spin is measured on the basis of this assumption. The direct detection (or absence) of thermal disk emission associated with a disk extending to the ISCO is the smoking-gun test to rule truncation in or out for the bright hard state. Using a self-consistent spectral model on data taken in the bright hard state while taking advantage of the complementary coverage and capabilities of Chandra and NuSTAR, we will achieve a definitive test of the truncation paradigm.

A Comparison between the Effects of Aerobic Dance Training on Mini-Trampoline and Hard Wooden Surface on Bone Resorption, Health-Related Physical Fitness, Balance, and Foot Plantar Pressure in Thai Working Women.

PubMed

Sukkeaw, Wittawat; Kritpet, Thanomwong; Bunyaratavej, Narong

2015-09-01

To compare the effects of aerobic dance training on mini-trampoline and hard wooden surface on bone resorption, health-related physical fitness, balance, and foot plantar pressure in Thai working women. Sixty-three volunteered females aged 35-45 years old participated in the study and were divided into 3 groups: A) aerobic dance on mini-trampoline (21 females), B) aerobic dance on hard wooden surface (21 females), and C) control group (21 females). All subjects in the aerobic dance groups wore heart rate monitors during exercise. Aerobic dance worked out 3 times a week, 40 minutes a day for 12 weeks. The intensity was set at 60-80% of the maximum heart rate. The control group engaged in routine physical activity. The collected data were bone formation (N-terminal propeptine of procollagen type I: P1NP) bone resorption (Telopeptide cross linked: β-CrossLaps) health-related physical fitness, balance, and foot plantar pressure. The obtained data from pre- and post trainings were compared and analyzed by paired samples t-test and one way analysis of covariance. The significant difference was at 0.05 level. After the 12-week training, the biochemical bone markers of both mini-trampoline and hard wooden surface aerobic dance training subjects decreased in bone resorption (β-CrossLaps) but increased in boneformation (P1NP). Health-related physical fitness, balance, and foot plantar pressure were not only better when comparing to the pre-test result but also significantly different when comparing to the control group (p < 0.05). The aerobic dance on mini-trampoline showed that leg muscular strength, balance and foot plantar pressure were significantly better than the aerobic dance on hard wooden surface (p < 0.05). The aerobic dance on mini-trampoline and hard wooden surface had positive effects on biochemical bone markers. However, the aerobic dance on mini-trampoline had more leg muscular strength and balance including less foot plantar pressure. It is considered to be

Mapping hard magnetic recording disks by TOF-SIMS

NASA Astrophysics Data System (ADS)

Spool, A.; Forrest, J.

2008-12-01

Mapping of hard magnetic recording disks by TOF-SIMS was performed both to produce significant analytical results for the understanding of the disk surface and the head disk interface in hard disk drives, and as an example of a macroscopic non-rectangular mapping problem for the technique. In this study, maps were obtained by taking discrete samples of the disk surface at set intervals in R and Θ. Because both in manufacturing, and in the disk drive, processes that may affect the disk surface are typically circumferential in nature, changes in the surface are likely to be blurred in the Θ direction. An algorithm was developed to determine the optimum relative sampling ratio in R and Θ. The results confirm what the experience of the analysts suggested, that changes occur more rapidly on disks in the radial direction, and that more sampling in the radial direction is desired. The subsequent use of statistical methods principle component analysis (PCA), maximum auto-correlation factors (MAF), and the algorithm inverse distance weighting (IDW) are explored.

Dose dependence of nano-hardness of 6H-SiC crystal under irradiation with inert gas ions

NASA Astrophysics Data System (ADS)

Yang, Yitao; Zhang, Chonghong; Su, Changhao; Ding, Zhaonan; Song, Yin

2018-05-01

Single crystal 6H-SiC was irradiated by inert gas ions (He, Ne, Kr and Xe ions) to various damage levels at room temperature. Nano-indentation test was performed to investigate the hardness change behavior with damage. The depth profile of nano-hardness for 6H-SiC decreased with increasing depth for both the pristine and irradiated samples, which was known as indentation size effect (ISE). Nix-Gao model was proposed to determine an asymptotic value of nano-hardness by taking account of ISE for both the pristine and irradiated samples. In this study, nano-hardness of the irradiated samples showed a strong dependence on damage level and showed a weak dependence on ions species. From the dependence of hardness on damage, it was found that the change of hardness demonstrated three distinguishable stages with damage: (I) The hardness increased with damage from 0 to 0.2 dpa and achieved a maximum of hardening fraction ∼20% at 0.2 dpa. The increase of hardness in this damage range was contributed to defects produced by ion irradiation, which can be described well by Taylor relation. (II) The hardness reduced rapidly with large decrement in the damage range from 0.2 to 0.5 dpa, which was considered to be from the covalent bond breaking. (III) The hardness reduced with small decrement in the damage range from 0.5 to 2.2 dpa, which was induced by extension of the amorphous layer around damage peak.

Evaluation of Open-Source Hard Real Time Software Packages

NASA Technical Reports Server (NTRS)

Mattei, Nicholas S.

2004-01-01

Reliable software is, at times, hard to find. No piece of software can be guaranteed to work in every situation that may arise during its use here at Glenn Research Center or in space. The job of the Software Assurance (SA) group in the Risk Management Office is to rigorously test the software in an effort to ensure it matches the contract specifications. In some cases the SA team also researches new alternatives for selected software packages. This testing and research is an integral part of the department of Safety and Mission Assurance. Real Time operation in reference to a computer system is a particular style of handing the timing and manner with which inputs and outputs are handled. A real time system executes these commands and appropriate processing within a defined timing constraint. Within this definition there are two other classifications of real time systems: hard and soft. A soft real time system is one in which if the particular timing constraints are not rigidly met there will be no critical results. On the other hand, a hard real time system is one in which if the timing constraints are not met the results could be catastrophic. An example of a soft real time system is a DVD decoder. If the particular piece of data from the input is not decoded and displayed to the screen at exactly the correct moment nothing critical will become of it, the user may not even notice it. However, a hard real time system is needed to control the timing of fuel injections or steering on the Space Shuttle; a delay of even a fraction of a second could be catastrophic in such a complex system. The current real time system employed by most NASA projects is Wind River's VxWorks operating system. This is a proprietary operating system that can be configured to work with many of NASA s needs and it provides very accurate and reliable hard real time performance. The down side is that since it is a proprietary operating system it is also costly to implement. The prospect of

Early Intervention: A Multicultural Perspective on d/Deaf and Hard of Hearing Multilingual Learners

ERIC Educational Resources Information Center

Bowen, Sandy K.

2016-01-01

Today's pluralistic society is characterized by families from many linguistic and cultural backgrounds, including families with infants and toddlers who are deaf or hard of hearing (d/Dhh). Taking a multicultural perspective, the author examines family-centered early intervention (FCEI) and the transition to school services for children who are…

When 1+1>2: Nanostructured composites for hard tissue engineering applications.

PubMed

Uskoković, Vuk

2015-12-01

Multicomponent, synergistic and multifunctional nanostructures have taken over the spotlight in the realm of biomedical nanotechnologies. The most prospective materials for bone regeneration today are almost exclusively composites comprising two or more components that compensate for the shortcomings of each one of them alone. This is quite natural in view of the fact that all hard tissues in the human body, except perhaps the tooth enamel, are composite nanostructures. This review article highlights some of the most prospective breakthroughs made in this research direction, with the hard tissues in main focus being those comprising bone, tooth cementum, dentin and enamel. The major obstacles to creating collagen/apatite composites modeled after the structure of bone are mentioned, including the immunogenicity of xenogeneic collagen and continuously failing attempts to replicate the biomineralization process in vitro. Composites comprising a polymeric component and calcium phosphate are discussed in light of their ability to emulate the soft/hard composite structure of bone. Hard tissue engineering composites created using hard material components other than calcium phosphates, including silica, metals and several types of nanotubes, are also discoursed on, alongside additional components deliverable using these materials, such as cells, growth factors, peptides, antibiotics, antiresorptive and anabolic agents, pharmacokinetic conjugates and various cell-specific targeting moieties. It is concluded that a variety of hard tissue structures in the body necessitates a similar variety of biomaterials for their regeneration. The ongoing development of nanocomposites for bone restoration will result in smart, theranostic materials, capable of acting therapeutically in direct feedback with the outcome of in situ disease monitoring at the cellular and subcellular scales. Progress in this research direction is expected to take us to the next generation of biomaterials

Taking 'women's work' 'like a man': husbands' experiences of care work.

PubMed

Calasanti, Toni; King, Neal

2007-08-01

We adopted a feminist, structural approach to husbands' experiences of caring for wives with Alzheimer's disease. This framework posited that men and women draw upon gender repertoires-situational ideals of behavior based upon their respective structural locations-that create gendered experiences of stress and coping strategies. We used a qualitative, constructivist approach to analyze in-depth interviews with 22 spousal caregivers and observations within support groups. Our analysis focused on the nine husbands, the strategies these men reported using to deal with problems that arose in their care work, and the extent to which these are congruent with the masculinities of White men in the United States. We found that these husbands' approaches to caregiving and their strategies for dealing with the work and feelings involved were rooted in their sense of selves as men. We outline their overall approaches to caregiving, identify six strategies husbands used to deal with problems stemming from care work-exerting force, focusing on tasks, blocking emotions, minimizing disruption, distracting attention, and self-medicating-and tie these to their structural positions as working-, middle-, and professional-class men. Theories of gender differences in the performance or quality of care work should tie these to structural arrangements. Unless the gendered bases upon which different styles or experiences are removed (i.e., structural inequality), designers of interventions cannot and should not expect to use the experience of one group to inform appropriate strategies for the other.

The Role of the Goal in Solving Hard Computational Problems: Do People Really Optimize?

ERIC Educational Resources Information Center

Carruthers, Sarah; Stege, Ulrike; Masson, Michael E. J.

2018-01-01

The role that the mental, or internal, representation plays when people are solving hard computational problems has largely been overlooked to date, despite the reality that this internal representation drives problem solving. In this work we investigate how performance on versions of two hard computational problems differs based on what internal…

College and Career Readiness: Course Taking Of Deaf and Hard of Hearing Secondary School Students.

PubMed

Nagle, Katherine; Newman, Lynn A; Shaver, Debra M; Marschark, Marc

2016-01-01

Research shows that deaf and hard of hearing (DHH) students frequently enter college and the workplace relatively unprepared for success in math, science, and reading. Based on data from the National Longitudinal Transition Study-2 (NLTS2), the present study focused on DHH students' college and career readiness by investigating their opportunities in secondary school to acquire college and career skills. DHH students earned more credits overall than hearing peers; both groups earned a similar number of credits in academic courses. However, DHH students took more vocational and nonacademic courses and fewer courses in science, social science, and foreign languages. There was evidence that DHH students' academic courses in math lacked the rigor of those taken by hearing peers, as DHH students earned more credits in basic math and fewer credits in midlevel math courses, and even fewer in advanced math courses, than hearing peers.

Dynamic hardness of metals

NASA Astrophysics Data System (ADS)

Liang, Xuecheng

Dynamic hardness (Pd) of 22 different pure metals and alloys having a wide range of elastic modulus, static hardness, and crystal structure were measured in a gas pulse system. The indentation contact diameter with an indenting sphere and the radius (r2) of curvature of the indentation were determined by the curve fitting of the indentation profile data. r 2 measured by the profilometer was compared with that calculated from Hertz equation in both dynamic and static conditions. The results indicated that the curvature change due to elastic recovery after unloading is approximately proportional to the parameters predicted by Hertz equation. However, r 2 is less than the radius of indenting sphere in many cases which is contradictory to Hertz analysis. This discrepancy is believed due to the difference between Hertzian and actual stress distributions underneath the indentation. Factors which influence indentation elastic recovery were also discussed. It was found that Tabor dynamic hardness formula always gives a lower value than that directly from dynamic hardness definition DeltaE/V because of errors mainly from Tabor's rebound equation and the assumption that dynamic hardness at the beginning of rebound process (Pr) is equal to kinetic energy change of an impact sphere over the formed crater volume (Pd) in the derivation process for Tabor's dynamic hardness formula. Experimental results also suggested that dynamic to static hardness ratio of a material is primarily determined by its crystal structure and static hardness. The effects of strain rate and temperature rise on this ratio were discussed. A vacuum rotating arm apparatus was built to measure Pd at 70, 127, and 381 mum sphere sizes, these results exhibited that Pd is highly depended on the sphere size due to the strain rate effects. P d was also used to substitute for static hardness to correlate with abrasion and erosion resistance of metals and alloys. The particle size effects observed in erosion were

The "Hard Problem" and the Quantum Physicists. Part 2: Modern Times

ERIC Educational Resources Information Center

Smith, C. U. M.

2009-01-01

This is the second part of a review of the work of quantum physicists on the "hard part" of the problem of mind. After an introduction which sets the scene and a brief review of contemporary work on the neural correlates of consciousness (NCC) the work of four prominent modern investigators is examined: J.C. Eccles/Friedrich Beck; Henry Stapp;…

Effect of Quenching Process on the Microstructure and Hardness of High-Carbon Martensitic Stainless Steel

NASA Astrophysics Data System (ADS)

Zhu, Qin-tian; Li, Jing; Shi, Cheng-bin; Yu, Wen-tao

2015-11-01

The microstructure and hardness of high-carbon martensitic stainless steel (HMSS) were investigated using thermal expansion analyzer, Thermo-calc, scanning electron microscope, x-ray diffraction, and Ultra-high temperature confocal microscope. The results indicate that the experimental steel should be austenitized in the temperature range of 1025-1075 °C, which can give a maximum hardness of 62 HRc with the microstructure consisting of martensite, retained austenite, and some undissolved carbides. With increasing austenitizing temperature, the amount of retained austenite increases, while the volume fraction of carbides increases first and then decreases. The starting temperature and finish temperature of martensite formation decrease with increasing cooling rates. Air-quenched samples can obtain less retained austenite, more compact microstructure, and higher hardness, compared with that of oil-quenched samples. For HMSS, the martensitic transformation takes place at some isolated areas with a slow nucleation rate.

Take-over performance in evasive manoeuvres.

PubMed

Happee, Riender; Gold, Christian; Radlmayr, Jonas; Hergeth, Sebastian; Bengler, Klaus

2017-09-01

We investigated after effects of automation in take-over scenarios in a high-end moving-base driving simulator. Drivers performed evasive manoeuvres encountering a blocked lane in highway driving. We compared the performance of drivers 1) during manual driving, 2) after automated driving with eyes on the road while performing the cognitively demanding n-back task, and 3) after automated driving with eyes off the road performing the visually demanding SuRT task. Both minimum time to collision (TTC) and minimum clearance towards the obstacle disclosed a substantial number of near miss events and are regarded as valuable surrogate safety metrics in evasive manoeuvres. TTC proved highly sensitive to the applied definition of colliding paths, and we prefer robust solutions using lane position while disregarding heading. The extended time to collision (ETTC) which takes into account acceleration was close to the more robust conventional TTC. In line with other publications, the initial steering or braking intervention was delayed after using automation compared to manual driving. This resulted in lower TTC values and stronger steering and braking actions. Using automation, effects of cognitive distraction were similar to visual distraction for the intervention time with effects on the surrogate safety metric TTC being larger with visual distraction. However the precision of the evasive manoeuvres was hardly affected with a similar clearance towards the obstacle, similar overshoots and similar excursions to the hard shoulder. Further research is needed to validate and complement the current simulator based results with human behaviour in real world driving conditions. Experiments with real vehicles can disclose possible systematic differences in behaviour, and naturalistic data can serve to validate surrogate safety measures like TTC and obstacle clearance in evasive manoeuvres. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Hard X-ray Sources for the Mexican Synchrotron Project

NASA Astrophysics Data System (ADS)

Reyes-Herrera, Juan

2016-10-01

One of the principal tasks for the design of the Mexican synchrotron was to define the storage ring energy. The main criteria for choosing the energy come from studying the electromagnetic spectrum that can be obtained from the synchrotron, because the energy range of the spectrum that can be obtained will determine the applications available to the users of the future light source. Since there is a public demand of hard X-rays for the experiments in the synchrotron community users from Mexico, in this work we studied the emission spectra from some hard X-ray sources which could be the best options for the parameters of the present Mexican synchrotron design. The calculations of the flux and the brightness for one Bending Magnet and four Insertion Devices are presented; specifically, for a Superconducting Bending Magnet (SBM), a Superconducting Wiggler (SCW), an In Vacuum Short Period Undulator (IV-SPU), a Superconducting Undulator (SCU) and for a Cryogenic Permanent Magnet Undulator (CPMU). Two commonly available synchrotron radiation programs were used for the computation (XOP and SRW). From the results, it can be concluded that the particle beam energy from the current design is enough to have one or more sources of hard X-rays. Furthermore, a wide range of hard X-ray region can be covered by the analyzed sources, and the choice of each type should be based on the specific characteristics of the X-ray beam to perform the experiments at the involved beamline. This work was done within the project Fomix Conacyt-Morelos ”Plan Estrategico para la construccion y operación de un Sincrotron en Morelos” (224392).

Post Your Digital Photos Online: Save Hard-Drive Space and Share Your Snapshots

ERIC Educational Resources Information Center

Branzburg, Jeffrey

2005-01-01

Digital photographs can take up a lot of hard-drive space. In light of this fact, many people are choosing to store their photos online. There are several ways to store pictures on the Web, the most popular being online photo storage services. These services have many benefits. They offer a safe place for photos in the event that one's computer…

Hard diffraction and deep inelastic scattering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bjorken, J.D.

1994-04-01

Since the advent of hard-collision physics, the study of diffractive processes - shadow physics - has been less prominent than before. However, there is now a renewed interest in the subject, especially in that aspect which synthesizes the short-distance, hard-collision phenomena with the classical physics of large rapidity-gaps. This is especially stimulated by the recent data on deep-inelastic scattering from HERA, as well as the theoretical work which relates to it. The word diffraction is sometimes used by high-energy physicists in a loose way. The author defines this term to mean: A diffractive process occurs if and only if theremore » is a large rapidity gap in the produced-particle phase space which is not exponentially suppressed. Here a rapidity gap means essentially no hadrons produced into the rapidity gap (which operates in the {open_quotes}lego{close_quotes} phase-space of pseudo-rapidity and azimuthal angle). And non-exponential suppression implies that the cross-section for creating a gap with width {Delta}{eta} does not have a power-law decrease with increasing subenergy s=e{sup {Delta}{eta}}, but behaves at most like some power of pseudorapidity {Delta}{eta}{approx}log(s). The term hard diffraction shall simply refer to those diffractive process which have jets in the final-state phase-space.« less

Mechanism of Na-Ion Storage in Hard Carbon Anodes Revealed by Heteroatom Doping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Zhifei; Bommier, Clement; Chong, Zhi Sen

Hard carbon is the candidate anode material for the commercialization of Na-ion batteries the batteries that by virtue of being constructed from inexpensive and abundant components open the door for massive scale up of battery-based storage of electrical energy. Holding back the development of these batteries is that a complete understanding of the mechanism of Na-ion storage in hard carbon has remained elusive. Although as an amorphous carbon, hard carbon possesses a subtle and complex structure composed of domains of layered rumpled sheets that have local order resembling graphene within each layer but complete disorder along the c-axis between layers.more » Here, we present two key discoveries: first that characteristics of hard carbon s structure can be modified systematically by heteroatom doping, and second, that these changes greatly affect Na-ion storage properties, which reveal the mechanisms for Na storage in hard carbon. Specifically, P, S and B doping was used to engineer the density of local defects in graphenic layers, and to modify the spacing between the layers. While opening the interlayer spacing through P or S doping extends the low-voltage capacity plateau, and increasing the defect concentration with P or B doping high first sodiation capacity is achieved. Furthermore, we observe that the highly defective B-doped hard carbon suffers a tremendous irreversible capacity in the first desodiation cycle. Our combined first principles calculations and experimental studies revealed a new trapping mechanism, showing that the high binding energies between B-doping induced defects and Na-ions are responsible for the irreversible capacity. The understanding generated in this work provides a totally new set of guiding principles for materials engineers working to optimize hard carbon for Na-ion battery applications.« less

Mechanism of Na-Ion Storage in Hard Carbon Anodes Revealed by Heteroatom Doping

DOE PAGES

Li, Zhifei; Bommier, Clement; Chong, Zhi Sen; ...

2017-05-23

Hard carbon is the candidate anode material for the commercialization of Na-ion batteries the batteries that by virtue of being constructed from inexpensive and abundant components open the door for massive scale up of battery-based storage of electrical energy. Holding back the development of these batteries is that a complete understanding of the mechanism of Na-ion storage in hard carbon has remained elusive. Although as an amorphous carbon, hard carbon possesses a subtle and complex structure composed of domains of layered rumpled sheets that have local order resembling graphene within each layer but complete disorder along the c-axis between layers.more » Here, we present two key discoveries: first that characteristics of hard carbon s structure can be modified systematically by heteroatom doping, and second, that these changes greatly affect Na-ion storage properties, which reveal the mechanisms for Na storage in hard carbon. Specifically, P, S and B doping was used to engineer the density of local defects in graphenic layers, and to modify the spacing between the layers. While opening the interlayer spacing through P or S doping extends the low-voltage capacity plateau, and increasing the defect concentration with P or B doping high first sodiation capacity is achieved. Furthermore, we observe that the highly defective B-doped hard carbon suffers a tremendous irreversible capacity in the first desodiation cycle. Our combined first principles calculations and experimental studies revealed a new trapping mechanism, showing that the high binding energies between B-doping induced defects and Na-ions are responsible for the irreversible capacity. The understanding generated in this work provides a totally new set of guiding principles for materials engineers working to optimize hard carbon for Na-ion battery applications.« less

Must "Hard Problems" Be Hard?

ERIC Educational Resources Information Center

Kolata, Gina

1985-01-01

To determine how hard it is for computers to solve problems, researchers have classified groups of problems (polynomial hierarchy) according to how much time they seem to require for their solutions. A difficult and complex proof is offered which shows that a combinatorial approach (using Boolean circuits) may resolve the problem. (JN)

Development of new hard hat dimensions using user-centered design approach among oil palm harvesters.

PubMed

Mohd Shukoor, Nor Shuhada; Mohd Tamrin, Shamsul Bahri; Guan, Ng Yee; Mohd Suadi Nata, Dayana Hazwani

2018-05-22

Hard hats are among the personal protective equipment (PPE) used in many industries to reduce the impact of any falling object on the skull and also to prevent head and brain injuries. However, the practice of wearing a safety helmet during working hours is still low. This is due to the physical discomfort perceived by safety helmet users. Given the unpopularity of the current hard hat, the general perception of workers concerning its use and its measurements are the determining factors in the development of a new hard hat. A cross-sectional study was conducted in which 132 male oil palm harvesters between 19 and 60 years of age were selected from among the employees of the same oil palm harvesting company. A set of questionnaires was developed to collect their socio-demographic information as well as their perceptions of comfort and the prevalence of head injury. In addition, a set of measuring instruments, including Martin's anthropometry set, was used for head measurement and data collection in respect of the current hard hat. In this research, six respondents were randomly selected to attend an interview session for qualitative assessment.RESULTSBased on the questionnaires, the unpopularity in the use of the hard hat was largely influenced by factors related to poor design, in general, and, specifically, poor ventilation (64%), load (67% ), and physical discomfort (42% ). The measurements of the anthropometric parameters and the dimensions of the hard hat also showed a significant mismatch. The unpopularity of the current hard hat among oil palm harvesters stemmed from the discomfort from wearing, which showed that the development of a new hard hat could lead to better usage and the greater likelihood of wearing a hard hat throughout the working day.

Effects of calcium and magnesium hardness on the fertilization and hatching success of hybrid catfish eggs

USDA-ARS?s Scientific Manuscript database

Hybrid catfish are exclusively produced by strip spawning of channel catfish females, fertilizing stripped eggs with blue catfish sperm, and hatching the fertilized eggs. As egg development takes outside the fish’s body, water hardness is one abioitic parameter, suggested to have a major effect on ...

Work hard, play hard?: A comparison of male and female lawyers' time in paid and unpaid work and participation in leisure activities.

PubMed

Wallace, Jean E; Young, Marisa C

2010-02-01

There has been a considerable amount of research that documents how women and men spend their time in different work and home tasks. We examine how much time professional women and men spend in paid and unpaid work and how this relates to their participation in different leisure activities. We also explore whether time in paid and unpaid work has gender-specific effects on leisure participation. In examining these issues, we rely on data from lawyers working in different legal settings. Our results show that, as hypothesized, men report more time in paid work and leisure whereas women devote more time to housework and childcare. An unexpected finding is that the time men spend in housework or childcare is either unrelated or positively related to their leisure participation. These results suggest that men's greater overall opportunities for leisure compared with women's appear to stem from the unanticipated relationships between men's involvement in housework and childcare and their leisure activities. We raise several possible explanations for these findings.

Double Take

ERIC Educational Resources Information Center

Educational Leadership, 2011

2011-01-01

This paper begins by discussing the results of two studies recently conducted in Australia. According to the two studies, taking a gap year between high school and college may help students complete a degree once they return to school. The gap year can involve such activities as travel, service learning, or work. Then, the paper presents links to…

Hard-to-Teach Topics: Using ICT Part 1

ERIC Educational Resources Information Center

Tanner, Ruth

2009-01-01

In November 2007 a joint ATM/MA team began working together to consider how ICT can be used to support the teaching and learning of topics that are considered to be "hard to teach" in secondary mathematics, within a project that complements that of the Secondary National Strategy. In the best subject association spirit, it was decided to…

Partnering, Collaborating, and Moving Ahead: Transition for Deaf and Hard of Hearing Students in Minnesota

ERIC Educational Resources Information Center

Knopf, Elise; Cashman-Bakken, Mary

2016-01-01

Minnesota leaders have worked hard to provide educational opportunities and employment services for people who are deaf or hard of hearing. The timely formation of pepnet 2 helped shape Minnesota's State Transition Team to "better prepare teachers, families, and students for transition from high school to independent living, employment,…

The influence of obesity, constitution and physical work on the phenomenon of urinary incontinence in women.

PubMed

Sustersic, O; Kralj, B

1998-01-01

Urinary incontinence in women is a common and complex problem which can be defined and classified as stress, urge and mixed incontinence. Three of the eight most common risk factors are obesity, constitution and physical work, in addition to age, length of menstrual cycle, number of pregnancies, education and level of health awareness. Women with the diagnosis of urinary incontinence were invited to respond to questionnaires on a voluntary basis. The three factors found to be associated with urinary incontinence are increased body weight, strong osteomuscular structure and hard physical work. These indicate that the work of a health team must take a holistic approach to women even before the phenomenon of urinary incontinence occurs.

Leah Robson and Bridgette Puljiz in the flight deck of NASA's 747 shuttle carrier during Take Your Children to Work Day

NASA Image and Video Library

2004-06-22

Leah Robson and Bridgette Puljiz of Tehachapi in the flight deck of NASA's modified Boeing 747 space shuttle carrier aircraft during Take Your Children to Work Day June 22 at NASA Dryden Flight Research Center.

Working parents: what factors are involved in their ability to take time off from work when their children are sick?

PubMed

Heymann, S J; Toomey, S; Furstenberg, F

1999-08-01

A series of studies has demonstrated that sick children fare better when their parents are present. To examine working conditions that determine whether parents can spend time with and become involved in the care of their children when they are sick. Survey with a multivariate analysis of factors influencing parental care of sick children. Mixed-income urban working parents aged 26 to 29 years participating in the Baltimore Parenthood Study. Only 42% of working parents in our sample cared for their young children when they became sick. A multivariate logistic regression analysis was conducted to predict which parents stayed at home when their children were sick. Those parents who had either paid sick or vacation leave were 5.2 times as likely to care for their children themselves when they were sick. Of parents with less than a high school education, 17% received paid leave, compared with 57% of parents with a general equivalency diploma, 76% of parents with a high school diploma, and 92% of parents with more than a high school education (P<.001). The finding that many parents were unable to care for their sick children themselves is important for pediatric care. While low-income children are more likely to face marked health problems and to be in need of parental care, they are more likely to live in households in which parents lack paid leave and cannot afford to take unpaid leave.

KENNEDY SPACE CENTER, FLA. - Children enjoy a hands-on display of security equipment during Take Our Children to Work Day. Employees were invited to share their work experience with their children on this annual event.

NASA Image and Video Library

2003-07-24

KENNEDY SPACE CENTER, FLA. - Children enjoy a hands-on display of security equipment during Take Our Children to Work Day. Employees were invited to share their work experience with their children on this annual event.

KENNEDY SPACE CENTER, FLA. - Children enjoy a hands-on display of fire equipment behind KSC NASA Headquarters. Employees were invited to share their work experience with their children for Take Our Children to Work Day.

NASA Image and Video Library

2003-07-24

KENNEDY SPACE CENTER, FLA. - Children enjoy a hands-on display of fire equipment behind KSC NASA Headquarters. Employees were invited to share their work experience with their children for Take Our Children to Work Day.

Hard Water and Soft Soap: Dependence of Soap Performance on Water Hardness

ERIC Educational Resources Information Center

Osorio, Viktoria K. L.; de Oliveira, Wanda; El Seoud, Omar A.; Cotton, Wyatt; Easdon, Jerry

2005-01-01

The demonstration of the performance of soap in different aqueous solutions, which is due to water hardness and soap formulation, is described. The demonstrations use safe, inexpensive reagents and simple glassware and equipment, introduce important everyday topics, stimulates the students to consider the wider consequences of water hardness and…

Studying Hardness Meter Spring Strength to Understand Hardness Distribution on Body Surfaces.

PubMed

Arima, Yoshitaka

2017-10-01

For developing a hardness multipoint measurement system for understanding hardness distribution on biological body surfaces, we investigated the spring strength of the contact portion main axis of a biological tissue hardness meter (product name: PEK). We measured the hardness of three-layered sheets of six types of gel sheets (90 mm × 60 mm × 6 mm) constituting the acupuncture practice pads, with PEK measurements of 1.96 N, 2.94 N, 3.92 N, 4.90 N, 5.88 N, 6.86 N, 7.84 N, 8.82 N, and 9.81 N of the main axis spring strength. We obtained measurements 10 times for the gel sheets and simultaneously measured the load using a digital scale. We measured the hardness distribution of induration embedded and breast cancer palpation models, with a main axis with 1.96 N, 4.90 N, and 9.81 N spring strengths, to create a two-dimensional Contour Fill Chart. Using 4.90 N spring strength, we could obtain measurement loads of ≤3.0 N, and the mean hardness was 5.14 mm. This was close to the median of the total measurement range 0.0-10.0 mm, making the measurement range the largest for this spring strength. We could image the induration of the induration-embedded model regardless of the spring strength. Overall, 4.90 N spring strength was best suited for imaging cancer in the breast cancer palpation model. Copyright © 2017. Published by Elsevier B.V.

Spring-like Ankle Foot Orthoses reduce the energy cost of walking by taking over ankle work.

PubMed

Bregman, D J J; Harlaar, J; Meskers, C G M; de Groot, V

2012-01-01

In patients with central neurological disorders, gait is often limited by a reduced ability to push off with the ankle. To overcome this reduced ankle push-off, energy-storing, spring-like carbon-composite Ankle Foot Orthoses (AFO) can be prescribed. It is expected that the energy returned by the AFO in late stance will support ankle push-off, and reduce the energy cost of walking. In 10 patients with multiple sclerosis and stroke the energy cost of walking, 3D kinematics, joint power, and joint work were measured during gait, with and without the AFO. The mechanical characteristics of the AFO were measured separately, and used to calculate the contribution of the AFO to the ankle kinetics. We found a significant decrease of 9.8% in energy cost of walking when walking with the AFO. With the AFO, the range of motion of the ankle was reduced by 12.3°, and the net work around the ankle was reduced by 29%. The total net work in the affected leg remained unchanged. The AFO accounted for 60% of the positive ankle work, which reduced the total amount of work performed by the leg by 11.1% when walking with the AFO. The decrease in energy cost when walking with a spring-like energy-storing AFO in central neurological patients is not induced by an augmented net ankle push-off, but by the AFO partially taking over ankle work. Copyright © 2011 Elsevier B.V. All rights reserved.

Master of the house: Why a company should take control of its building projects.

PubMed

Thurm, David

2005-10-01

When you head up a big construction project for your organization, coming in on time and on budget isn't enough. If you want to avoid squandering what is probably your company's largest capital investment, it's important to create a building that reflects your company's mission and produces a truly energizing work environment, says David Thurm, CIO of the New York Times Company and head of the team responsible for designing and building the Times' new corporate headquarters in Manhattan. The only way to get this kind of package-great design and innovative features that together further your business goals- is to take an active role. Assemble the right team, and then stay involved, asking hard questions about things that are generally taken as givens. Articulate a vision of your future work space, and drive the search for ways to realize this vision. In short, be a builder, not merely an owner. It's easy to understand why this approach is the exception rather than the rule. To most companies, design and construction seem foreign and forbidding, rife with pitfalls. Because of the murkiness of the field and a lack of experience and confidence, most companies play a relatively minor role in their construction projects. But it's a giant mistake to be a passive consumer when it comes to one of your most important assets. At best, you'll get well-intentioned guesses by others as to what you want; at worst, you'll end up with a building that's at odds with your identity. The author shares a series of lessons learned. Implicit in all of them: You have to push yourself as hard as you push your contractors.

Bulk sensitive hard x-ray photoemission electron microscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patt, M., E-mail: m.patt@fz-juelich.de; Wiemann, C.; Weber, N.

Hard x-ray photoelectron spectroscopy (HAXPES) has now matured into a well-established technique as a bulk sensitive probe of the electronic structure due to the larger escape depth of the highly energetic electrons. In order to enable HAXPES studies with high lateral resolution, we have set up a dedicated energy-filtered hard x-ray photoemission electron microscope (HAXPEEM) working with electron kinetic energies up to 10 keV. It is based on the NanoESCA design and also preserves the performance of the instrument in the low and medium energy range. In this way, spectromicroscopy can be performed from threshold to hard x-ray photoemission. Themore » high potential of the HAXPEEM approach for the investigation of buried layers and structures has been shown already on a layered and structured SrTiO{sub 3} sample. Here, we present results of experiments with test structures to elaborate the imaging and spectroscopic performance of the instrument and show the capabilities of the method to image bulk properties. Additionally, we introduce a method to determine the effective attenuation length of photoelectrons in a direct photoemission experiment.« less

An Experimental Investigation on Hardness and Microstructure of Heat Treated EN 9 Steel

NASA Astrophysics Data System (ADS)

Biswas, Palash; Kundu, Arnab; Mondal, Dhiraj

2017-08-01

In the modern engineering world, extensive research has led to the development of some special grades of steel, often suited for enhanced functions. EN 9 steel is one such grade, having major applications in power plants, automobile and aerospace industry. Different heat treatment processes are employed to achieve high hardness and high wear resistance, but machinability subsequently decreases. Existing literature is not sufficient to achieve a balance between hardness and machinability. The aim of this experimental work is to determine the hardness values and observe microstructural changes in EN9 steel, when it is subjected to annealing, normalizing and quenching. Finally, the effects of tempering after each of these heat treatments on hardness and microstructure have also been shown. It is seen that the tempering after normalizing the specimen achieved satisfactory results. The microstructure was also observed to be consisting of fine grains.

Studying radiation hardness of a cadmium tungstate crystal based radiation detector

NASA Astrophysics Data System (ADS)

Shtein, M. M.; Smekalin, L. F.; Stepanov, S. A.; Zatonov, I. A.; Tkacheva, T. V.; Usachev, E. Yu

2016-06-01

The given article considers radiation hardness of an X-ray detector used in production of non-destructive testing instruments and inspection systems. In the course of research, experiments were carried out to estimate radiation hardness of a detector based on cadmium tungstate crystal and its structural components individually. The article describes a layout of an experimental facility that was used for measurements of radiation hardness. The radiation dose dependence of the photodiode current is presented, when it is excited by a light flux of a scintillator or by an external light source. Experiments were carried out to estimate radiation hardness of two types of optical glue used in detector production; they are based on silicon rubber and epoxy. With the help of a spectrophotometer and cobalt gun, each of the glue samples was measured for a relative light transmission factor with different wavelengths, depending on the radiation dose. The obtained data are presented in a comprehensive analysis of the results. It was determined, which of the glue samples is most suitable for production of detectors working under exposure to strong radiation.

Extending Working Life: Which Competencies are Crucial in Near-Retirement Age?

PubMed

Wiktorowicz, Justyna

2018-01-01

Nowadays, one of the most important economic and social phenomena is population ageing. Due to the low activity rate of older people, one of the most important challenges is to take various actions involving active ageing, which is supposed to extending working life, and along with it-improve the competencies of older people. The aim of this paper is to evaluate the relevance of different competencies for extending working life, with limiting the analysis for Poland. The paper also assesses the competencies of mature Polish people (aged 50+, but still in working age). In the statistical analysis, I used logistic regression, as well as descriptive statistics and appropriate statistical tests. The results show that among the actions aimed at extending working life, the most important are those related to lifelong learning, targeted at improving the competencies of the older generation. The competencies (both soft and hard) of people aged 50+ are more important than their formal education.

Becoming a School of Character: What It Takes.

ERIC Educational Resources Information Center

Lickona, Thomas

1997-01-01

Character education is a deliberate, whole-school effort to create a community of virtue, where moral behaviors such as respect, honesty, kindness, hard work, and self-control are modeled, taught, experienced, and practiced in everyday operations. High schools can mobilize the peer culture by involving students and parents in setting personal,…

How is the brain working?: Research on brain oscillations and connectivities in a new "Take-Off" state.

PubMed

Başar, Erol; Düzgün, Aysel

2016-05-01

The present report is a trial to survey analysis and applications of brain oscillations in cognitive impairment for opening the way to a new take off in research on brain oscillation. Although the number of papers related to brain oscillations rapidly increases, it is important to indicate the common principles governing the functioning of brain oscillations in the brain and body. Research scientists need a global view on the types of analysis, applications and existing oscillations. Further, scientists dealing with brain oscillations must have some knowledge from theoretical physics, system theory, and also general philosophy. The neuroscientists working on brain oscillations can mentally integrate several papers in the present report, and try to discover new avenues to augment knowledge on brain functions. A new take off in the search of brain oscillations indicates the strong need to survey this brunch of neuroscience in a broad panoply of science. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Does magnesium hardness in hatching waters affect the fertilization and hatching success of hybrid catfish eggs

USDA-ARS?s Scientific Manuscript database

Embryonic development is deemed to be the most sensitive stage in the life cycle of a teleost. As egg development takes outside the fish’s body, water hardness is one abioitic parameter, suggested to have a major effect on egg development and embryo survival. Ca2+ and Mg2+ contribute to water har...

Taking Over a Broken Program

ERIC Educational Resources Information Center

Grabowski, Carl

2008-01-01

Taking over a broken program can be one of the hardest tasks to take on. However, working towards a vision and a common goal--and eventually getting there--makes it all worth it in the end. In this article, the author shares the lessons she learned as the new director for the Bright Horizons Center in Ashburn, Virginia. She suggests that new…

Cultural democracy: the way forward for primary care of hard to reach New Zealanders.

PubMed

Finau, Sitaleki A; Finau, Eseta

2007-09-01

The use of cultural democracy, the freedom to practice one's culture without fear, as a framework for primary care service provision is essential for improved health service in a multi cultural society like New Zealand. It is an effective approach to attaining health equity for all. Many successful health ventures are ethnic specific and have gone past cultural competency to the practice of cultural democracy. That is, the services are freely taking on the realities of clients without and malice from those of other ethnicities. In New Zealand the scientific health service to improve the health of a multi cultural society are available but there is a need to improve access and utilization by hard to reach New Zealanders. This paper discusses cultural democracy and provide example of how successful health ventures that had embraced cultural democracy were implemented. It suggests that cultural democracy will provide the intellectual impetus and robust philosophy for moving from equality to equity in health service access and utilization. This paper would provide a way forward to improved primary care utilization, efficiency, effectiveness and equitable access especially for the hard to reach populations. use the realities of Pacificans in New Zealand illustrate the use of cultural democracy, and thus equity to address the "inverse care law" of New Zealand. The desire is for primary care providers to take cognizance and use cultural democracy and equity as the basis for the design and practice of primary health care for the hard to reach New Zealanders.

Janka hardness using nonstandard specimens

Treesearch

David W. Green; Marshall Begel; William Nelson

2006-01-01

Janka hardness determined on 1.5- by 3.5-in. specimens (2×4s) was found to be equivalent to that determined using the 2- by 2-in. specimen specified in ASTM D 143. Data are presented on the relationship between Janka hardness and the strength of clear wood. Analysis of historical data determined using standard specimens indicated no difference between side hardness...

Determining the Effect of Material Hardness During the Hard Turning of AISI4340 Steel

NASA Astrophysics Data System (ADS)

Kambagowni, Venkatasubbaiah; Chitla, Raju; Challa, Suresh

2018-05-01

In the present manufacturing industries hardened steels are most widely used in the applications like tool design and mould design. It enhances the application range of hard turning of hardened steels in manufacturing industries. This study discusses the impact of workpiece hardness, feed and depth of cut on Arithmetic mean roughness (Ra), root mean square roughness (Rq), mean depth of roughness (Rz) and total roughness (Rt) during the hard turning. Experiments have been planned according to the Box-Behnken design and conducted on hardened AISI4340 steel at 45, 50 and 55 HRC with wiper ceramic cutting inserts. Cutting speed is kept constant during this study. The analysis of variance was used to determine the effects of the machining parameters. 3-D response surface plots drawn based on RSM were utilized to set up the input-output relationships. The results indicated that the feed rate has the most significant parameter for Ra, Rq and Rz and hardness has the most critical parameter for the Rt. Further, hardness shows its influence over all the surface roughness characteristics.

Obsidianus lapis rugosity and hardness determination: fibre laser craftsmanship

NASA Astrophysics Data System (ADS)

Aguilar-Morales, A. I.; Velazquez-Gonzalez, J. S.; Marrujo-García, S.; Reyes-Sanchez, J. I.; Alvarez-Chávez, J. A.

2014-05-01

Obsidianus lapis is a volcanic rock that has been worked into tools for cutting or weaponry by Teotihuacan people for hundreds of years. Currently it is used in jewelry or for house decorative items such as elaborated sculptures. From the physico-chemical properties point of view, obsidianus lapis is considered a glass as its composition is 80% silicon dioxide. In México there are different kinds of obsidianus lapis according to its colour: rainbow, black, brown, red, silver, golden and snowflake. The traditional grinding process for working with obsidianus lapis includes fixed grinders and sandpaper for the polishing process, where the craftsman grinds the rock manually obtaining a variety of shapes. Laser processing of natural stones is a relatively new topic. We propose the use of an Yb3+-doped fibre laser for cutting and ablating obsidianus lapis into spherical, rectangular and oval shapes. By means of a theoretical analysis of roughness and hardness, which affect the different surfaces and final shapes, and considering the changes in material temperature during laser interaction, this work will focus on parameter determination such as: laser fluence, incidence angle, laser average power and peak pulse energy, from the proposed Q-switched fibre laser design. Full optical, hardness and rugosity, initial and final, characterization will be included in the presentation.

Tactile sensor of hardness recognition based on magnetic anomaly detection

NASA Astrophysics Data System (ADS)

Xue, Lingyun; Zhang, Dongfang; Chen, Qingguang; Rao, Huanle; Xu, Ping

2018-03-01

Hardness, as one kind of tactile sensing, plays an important role in the field of intelligent robot application such as gripping, agricultural harvesting, prosthetic hand and so on. Recently, with the rapid development of magnetic field sensing technology with high performance, a number of magnetic sensors have been developed for intelligent application. The tunnel Magnetoresistance(TMR) based on magnetoresistance principal works as the sensitive element to detect the magnetic field and it has proven its excellent ability of weak magnetic detection. In the paper, a new method based on magnetic anomaly detection was proposed to detect the hardness in the tactile way. The sensor is composed of elastic body, ferrous probe, TMR element, permanent magnet. When the elastic body embedded with ferrous probe touches the object under the certain size of force, deformation of elastic body will produce. Correspondingly, the ferrous probe will be forced to displace and the background magnetic field will be distorted. The distorted magnetic field was detected by TMR elements and the output signal at different time can be sampled. The slope of magnetic signal with the sampling time is different for object with different hardness. The result indicated that the magnetic anomaly sensor can recognize the hardness rapidly within 150ms after the tactile moment. The hardness sensor based on magnetic anomaly detection principal proposed in the paper has the advantages of simple structure, low cost, rapid response and it has shown great application potential in the field of intelligent robot.

Surface Morphology and Hardness Analysis of TiCN Coated AA7075 Aluminium Alloy

NASA Astrophysics Data System (ADS)

Srinath, M. K.; Ganesha Prasad, M. S.

2017-12-01

Successful titanium carbonitride (TiCN) coating on AA7075 plates using the PVD technique depends upon many variables, including temperature, pressure, incident angle and energy of the reactive ions. Coated specimens have shown an increase in their surface hardness of 2.566 GPa. In this work, an attempt to further augment the surface hardness and understand its effects on the surface morphology was performed through heat treatments at 500°C for different duration of times. Specimen's heat treated at 500°C for 1 h exhibited a maximum surface hardness of 6.433 GPa, corresponding to an increase of 92.07%. The XRD results showed the presence of Al2Ti and AlTi3N and indicate the bond created between them. Unit cell lattice parameters in the XRD data are calculated using Bragg's law. The SEM images exhibit increasing crack sizes as the heat treatment time is increased. From the studies, the heat treatment duration can be optimized to 1 h, which exhibited an augmented surface hardness, as further increases in durations caused a drop in the surface hardness. The heat treatment effectively modified the surface hardness. Equations providing the relationships that temperature and time have with the reaction parameters are presented.

Virial Coefficients and Equations of State for Hard Polyhedron Fluids.

PubMed

Irrgang, M Eric; Engel, Michael; Schultz, Andrew J; Kofke, David A; Glotzer, Sharon C

2017-10-24

Hard polyhedra are a natural extension of the hard sphere model for simple fluids, but there is no general scheme for predicting the effect of shape on thermodynamic properties, even in moderate-density fluids. Only the second virial coefficient is known analytically for general convex shapes, so higher-order equations of state have been elusive. Here we investigate high-precision state functions in the fluid phase of 14 representative polyhedra with different assembly behaviors. We discuss historic efforts in analytically approximating virial coefficients up to B 4 and numerically evaluating them to B 8 . Using virial coefficients as inputs, we show the convergence properties for four equations of state for hard convex bodies. In particular, the exponential approximant of Barlow et al. (J. Chem. Phys. 2012, 137, 204102) is found to be useful up to the first ordering transition for most polyhedra. The convergence behavior we explore can guide choices in expending additional resources for improved estimates. Fluids of arbitrary hard convex bodies are too complicated to be described in a general way at high densities, so the high-precision state data we provide can serve as a reference for future work in calculating state data or as a basis for thermodynamic integration.

Suzaku Detection of Diffuse Hard X-Ray Emission Outside Vela X

NASA Technical Reports Server (NTRS)

Katsuda, Satoru; Mori, Koji; Petre, Robert; Yamaguchi, Hiroya; Tsunemi, Hiroshi; Bocchino, Fabrizio; Bamba, Aya; Miceli, Marco; Hewitt, John W.; Temim, Tea;

The Hard X-ray Imager (HXI) for the ASTRO-H Mission

NASA Astrophysics Data System (ADS)

Sato, Goro; Kokubun, Motohide; Nakazawa, Kazuhiro; Enoto, Teruaki; Fukazawa, Yasushi; Harayama, Atsushi; Hayashi, Katsuhiro; Kataoka, Jun; Katsuta, Junichiro; Kawaharada, Madoka; Laurent, Philippe; Lebrun, François; Limousin, Olivier; Makishima, Kazuo; Mizuno, Tsunefumi; Mori, Kunishiro; Nakamori, Takeshi; Noda, Hirofumi; Odaka, Hirokazu; Ohno, Masanori; Ohta, Masayuki; Saito, Shinya; Sato, Rie; Tajima, Hiroyasu; Takahashi, Hiromitsu; Takahashi, Tadayuki; Takeda, Shinichiro; Terada, Yukikatsu; Uchiyama, Hideki; Uchiyama, Yasunobu; Watanabe, Shin; Yamaoka, Kazutaka; Yatsu, Yoichi; Yuasa, Takayuki

2014-07-01

The 6th Japanese X-ray satellite, ASTRO-H, is scheduled for launch in 2015. The hard X-ray focusing imaging system will observe astronomical objects with the sensitivity for detecting point sources with a brightness of 1/100,000 times fainter than the Crab nebula at > 10 keV. The Hard X-ray Imager (HXI) is a focal plane detector 12 m below the hard X-ray telescope (HXT) covering the energy range from 5 to 80 keV. The HXI is composed of a stacked Si/CdTe semiconductor detector module and surrounding BGO scintillators. The latter work as active shields for efficient reduction of background events caused by cosmic-ray particles, cosmic X-ray background, and in-orbit radiation activation. In this paper, we describe the detector system, and present current status of flight model development, and performance of HXI using an engineering model of HXI.

Why Should Secondary Schools Take Working with Boys Seriously?

ERIC Educational Resources Information Center

Jackson, David; Salisbury, Jonathan

1996-01-01

Addresses boys' disruptive behavior in the classroom, teachers' resignation to it, and why schools need to work with boys as a matter of importance to enhancing gender work in schools. The limitations of using sex role theory in approaching gender work with boys are highlighted, and teaching methods for harnessing boys' spontaneous interests in…

Hard-Core Unemployment: A Selected, Annotated Bibliography.

ERIC Educational Resources Information Center

Cameron, Colin, Comp.; Menon, Anila Bhatt, Comp.

This annotated bibliography contains references to various films, articles, and books on the subject of hard-core unemployment, and is divided into the following sections: (1) The Sociology of the Hard-Core Milieu, (2) Training Programs, (3) Business and the Hard-Core, (4) Citations of Miscellaneous References on Hard-Core Unemployment, (5)…

1. On note taking.

PubMed

Plaut, Alfred B J

2005-02-01

In this paper the author explores the theoretical and technical issues relating to taking notes of analytic sessions, using an introspective approach. The paper discusses the lack of a consistent approach to note taking amongst analysts and sets out to demonstrate that systematic note taking can be helpful to the analyst. The author describes his discovery that an initial phase where as much data was recorded as possible did not prove to be reliably helpful in clinical work and initially actively interfered with recall in subsequent sessions. The impact of the nature of the analytic session itself and the focus of the analyst's interest on recall is discussed. The author then describes how he modified his note taking technique to classify information from sessions into four categories which enabled the analyst to select which information to record in notes. The characteristics of memory and its constructive nature are discussed in relation to the problems that arise in making accurate notes of analytic sessions.

Relationship between analysis of laser speckle image and Knoop hardness on softening enamel.

PubMed

Koshoji, Nelson H; Prates, Renato A; Bussadori, Sandra K; Bortoletto, Carolina C; de Miranda Junior, Walter G; Librantz, André F H; Leal, Cintia Raquel Lima; Oliveira, Marcelo T; Deana, Alessandro M

2016-09-01

In this study is presented the correlation between laser speckle images and enamel hardness loss. In order to shift the enamel hardness, a dental demineralization model was applied to 32 samples of vestibular bovine teeth. After they were cleaned, cut and polished, the samples were divided into 4 groups and immersed in 30ml of a cola-based soft drink for 10, 20, 30 and 40min twice a day for 7 consecutive days with half the surface protected by two layers of nail polish. Each sample was analyzed by Knoop hardness and laser speckle imaging. Pearson's correlation analysis demonstrated that the laser speckle image technique presents a strong correlation with the hardness loss of the enamel (r=0.7085, p<0.0001). This finding is corroborated by Blend & Altman analysis, in which the data presented a constant behavior throughout the whole interval. For both analyses, more than 95% of the data is within the confidence interval, as expected. This work demonstrates, for the first time to our knowledge, an empirical model for correlating laser speckle images with the loss of tooth enamel hardness. Copyright © 2016. Published by Elsevier B.V.

Improvement of Quench Factor Analysis in Phase and Hardness Prediction of a Quenched Steel

NASA Astrophysics Data System (ADS)

Kianezhad, M.; Sajjadi, S. A.

2013-05-01

The accurate prediction of alloys' properties introduced by heat treatment has been considered by many researchers. The advantages of such predictions are reduction of test trails and materials' consumption as well as time and energy saving. One of the most important methods to predict hardness in quenched steel parts is Quench Factor Analysis (QFA). Classical QFA is based on the Johnson-Mehl-Avrami-Kolmogorov (JMAK) equation. In this study, a modified form of the QFA based on the work by Rometsch et al. is compared with the classical QFA, and they are applied to prediction of hardness of steels. For this purpose, samples of CK60 steel were utilized as raw material. They were austenitized at 1103 K (830 °C). After quenching in different environments, they were cut and their hardness was determined. In addition, the hardness values of the samples were fitted using the classical and modified equations for the quench factor analysis and the results were compared. Results showed a significant improvement in fitted values of the hardness and proved the higher efficiency of the new method.

30 CFR 56.15002 - Hard hats.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Hard hats. 56.15002 Section 56.15002 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Personal Protection § 56.15002 Hard hats. All persons shall wear suitable hard hats when in or around a mine or plant where falling objects...

30 CFR 56.15002 - Hard hats.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Hard hats. 56.15002 Section 56.15002 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Personal Protection § 56.15002 Hard hats. All persons shall wear suitable hard hats when in or around a mine or plant where falling objects...

30 CFR 57.15002 - Hard hats.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Hard hats. 57.15002 Section 57.15002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Underground § 57.15002 Hard hats. All persons shall wear suitable hard hats when in or around a mine or plant...

30 CFR 57.15002 - Hard hats.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Hard hats. 57.15002 Section 57.15002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Underground § 57.15002 Hard hats. All persons shall wear suitable hard hats when in or around a mine or plant...

30 CFR 56.15002 - Hard hats.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Hard hats. 56.15002 Section 56.15002 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Personal Protection § 56.15002 Hard hats. All persons shall wear suitable hard hats when in or around a mine or plant where falling objects...

30 CFR 56.15002 - Hard hats.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Hard hats. 56.15002 Section 56.15002 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Personal Protection § 56.15002 Hard hats. All persons shall wear suitable hard hats when in or around a mine or plant where falling objects...

30 CFR 56.15002 - Hard hats.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Hard hats. 56.15002 Section 56.15002 Mineral... HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Personal Protection § 56.15002 Hard hats. All persons shall wear suitable hard hats when in or around a mine or plant where falling objects...

30 CFR 57.15002 - Hard hats.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Hard hats. 57.15002 Section 57.15002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Underground § 57.15002 Hard hats. All persons shall wear suitable hard hats when in or around a mine or plant...

30 CFR 57.15002 - Hard hats.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Hard hats. 57.15002 Section 57.15002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Underground § 57.15002 Hard hats. All persons shall wear suitable hard hats when in or around a mine or plant...

30 CFR 57.15002 - Hard hats.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Hard hats. 57.15002 Section 57.15002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Underground § 57.15002 Hard hats. All persons shall wear suitable hard hats when in or around a mine or plant...

Reconnection, Particle Acceleration, and Hard X-ray Emission in Eruptive Solar Flares

NASA Astrophysics Data System (ADS)

Martens, Petrus C.

1998-11-01

The frequent occurrence of Hard X-ray emission from the top of flaring loops was one of the discoveries by the Hard X-ray telescope on board the Japanese Yohkoh satellite. I will show how the combined effect of magnetic field convergence and pitch- angle scattering of non-thermal electrons injected at the top of the loop results in the generation of looptop sources with properties akin to those observed by Yohkoh. In addition it is shown that the injection of proton beams in the loop legs, expected from theory, reproduces the observed high temperature ``ridges" in the loop legs by mirroring and energy loss through collisions. I will interpret these numerical results as supporting the now widely accepted model of an erupting magnetic flux tube generating a reconnecting current sheet in its wake, where most of the energy release takes place. The strong similarity with the reconnection observed in the MRX experiment in Princeton will be analyzed in detail.

[Drinking water hardness and chronic degenerative diseases. I. Analysis of epidemiological research].

PubMed

Nardi, G; Donato, F; Monarca, S; Gelatti, U

2003-01-01

For many years a causal relation between drinking water hardness and cardiovascular or other chronic degenerative diseases in humans has been hypothesized. In order to evaluate the association between the concentration of minerals (calcium and magnesium) responsible for the hardness of drinking water and human health, a review of all the articles published on the subject from 1980 up to today has been carried out. The retrieved articles have been divided into 4 categories: geographic correlation studies, cross-sectional studies, case-control and cohort studies, and clinical trials. The methods for the selection of the articles and the extraction and analysis of the data are detailed in this paper. Epidemiological studies have been reviewed critically, and some conclusions have been drawn taking into account the research in basic sciences and experimental studies. However, a formal meta-analysis has not been performed, due to the heterogeneity of measures of effect among the different studies.

Back to Work

ERIC Educational Resources Information Center

Fernandez, Kim

2010-01-01

The economic downturn hit working America particularly hard, as agricultural, automotive, manufacturing, and retail jobs in many corners of the country all but evaporated. Consumers continue to cut back, and jobless rates in many states have eclipsed levels not seen in decades. Out of work and under pressure, many Americans are turning to the…

Gettysburg College Takes Work-Life Balance Seriously

ERIC Educational Resources Information Center

Wilson, Robin

2009-01-01

This article describes the work-life benefits Gettysburg College offers its employees. 400 of Gettysburg's 725 full-time employees participate in the college's wellness program. About half of them stick with it long enough to earn discounts of up to $500 a year on their health-insurance premiums. The wellness program--which includes free on-campus…

Take Charge of Your Career

ERIC Educational Resources Information Center

Brown, Marshall A.

2013-01-01

Today's work world is full of uncertainty. Every day, people hear about another organization going out of business, downsizing, or rightsizing. To prepare for these uncertain times, one must take charge of their own career. This article presents some tips for surviving in today's world of work: (1) Be self-managing; (2) Know what you…

Traumatization in Deaf and Hard-of-Hearing Adult Psychiatric Outpatients.

PubMed

Øhre, Beate; Uthus, Mette Perly; von Tetzchner, Stephen; Falkum, Erik

2015-07-01

Deaf and hard-of-hearing persons are at risk for experiencing traumatic events and such experiences are associated with symptoms of mental disorder. We investigated the prevalence of traumatic events and subsequent traumatization in adults referred to specialized psychiatric outpatient units for deaf and hard-of-hearing patients. Sixty-two patients were diagnosed with mental disorders and assessed for potential traumatic experiences in their preferred language and mode of communication using instruments translated into Norwegian Sign Language. All patients reported traumatic events, with a mean of 6.2 different types; 85% reported subsequent traumatization not significantly associated with either residential school setting or communicative competence of childhood caregivers. Traumatization patterns in both sexes were similar to those in hearing clinical samples. Findings indicate that psychiatric intake interviews should routinely assess potentially traumatic events and their impacts, and that mental health professionals working with deaf and hard-of-hearing patients should be able to treat trauma-related disorders. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Engaging Deaf and Hard of Hearing Students in the School Library: A Handbook for Teacher-Librarians

ERIC Educational Resources Information Center

Eisner, Nadene

2012-01-01

Over seventy percent of students who are deaf or hard of hearing will attend a public school and enroll in a classroom with their hearing peers or in a self-contained classroom with other deaf and hard of hearing students. Teacher-librarians who work in these schools can improve their instruction by understanding not only what it means to be…

Warren G. Harding and the Press.

ERIC Educational Resources Information Center

Whitaker, W. Richard

There are many parallels between the Richard M. Nixon administration and Warren G. Harding's term: both Republicans, both touched by scandal, and both having a unique relationship with the press. But in Harding's case the relationship was a positive one. One of Harding's first official acts as president was to restore the regular White House news…

Breath-taking jobs: a case–control study of respiratory work disability by occupation in Norway

PubMed Central

Fell, AKM; Abrahamsen, R; Henneberger, PK; Svendsen, MV; Andersson, E; Torén, K; Kongerud, J

2016-01-01

Background The current knowledge on respiratory work disability is based on studies that used crude categories of exposure. This may lead to a loss of power, and does not provide sufficient information to allow targeted workplace interventions and follow-up of patients with respiratory symptoms. Objectives The aim of this study was to identify occupations and specific exposures associated with respiratory work disability. Methods In 2013, a self-administered questionnaire was mailed to a random sample of the general population, aged 16–50, in Telemark County, Norway. We defined respiratory work disability as a positive response to the survey question: ‘Have you ever had to change or leave your job because it affected your breathing?’ Occupational exposures were assessed using an asthma-specific job-exposure matrix, and comparison of risks was made for cases and a median of 50 controls per case. Results 247 workers had changed their work because of respiratory symptoms, accounting for 1.7% of the respondents ever employed. The ‘breath-taking jobs’ were cooks/chefs: adjusted OR 3.6 (95% CI 1.6 to 8.0); welders: 5.2 (2.0 to 14); gardeners: 4.5 (1.3 to 15); sheet metal workers: 5.4 (2.0 to 14); cleaners: 5.0 (2.2 to 11); hairdressers: 6.4 (2.5 to 17); and agricultural labourers: 7.4 (2.5 to 22). Job changes were also associated with a variety of occupational exposures, with some differences between men and women. Conclusions Self-report and job-exposure matrix data showed similar findings. For the occupations and exposures associated with job change, preventive measures should be implemented. PMID:27365181

Scalable Metropolis Monte Carlo for simulation of hard shapes

NASA Astrophysics Data System (ADS)

Anderson, Joshua A.; Eric Irrgang, M.; Glotzer, Sharon C.

2016-07-01

We design and implement a scalable hard particle Monte Carlo simulation toolkit (HPMC), and release it open source as part of HOOMD-blue. HPMC runs in parallel on many CPUs and many GPUs using domain decomposition. We employ BVH trees instead of cell lists on the CPU for fast performance, especially with large particle size disparity, and optimize inner loops with SIMD vector intrinsics on the CPU. Our GPU kernel proposes many trial moves in parallel on a checkerboard and uses a block-level queue to redistribute work among threads and avoid divergence. HPMC supports a wide variety of shape classes, including spheres/disks, unions of spheres, convex polygons, convex spheropolygons, concave polygons, ellipsoids/ellipses, convex polyhedra, convex spheropolyhedra, spheres cut by planes, and concave polyhedra. NVT and NPT ensembles can be run in 2D or 3D triclinic boxes. Additional integration schemes permit Frenkel-Ladd free energy computations and implicit depletant simulations. In a benchmark system of a fluid of 4096 pentagons, HPMC performs 10 million sweeps in 10 min on 96 CPU cores on XSEDE Comet. The same simulation would take 7.6 h in serial. HPMC also scales to large system sizes, and the same benchmark with 16.8 million particles runs in 1.4 h on 2048 GPUs on OLCF Titan.

Influence of Gene Expression on Hardness in Wheat

PubMed Central

Nirmal, Ravi C.; Wrigley, Colin

2016-01-01

Puroindoline (Pina and Pinb) genes control grain texture or hardness in wheat. Wild-type/soft alleles lead to softer grain while a mutation in one or both of these genes results in a hard grain. Variation in hardness in genotypes with identical Pin alleles (wild-type or mutant) is known but the molecular basis of this is not known. We now report the identification of wheat genotypes with hard grain texture and wild-type/soft Pin alleles indicating that hardness in wheat may be controlled by factors other than mutations in the coding region of the Pin genes. RNA-Seq analysis was used to determine the variation in the transcriptome of developing grains of thirty three diverse wheat genotypes including hard (mutant Pin) and soft (wild type) and those that were hard without having Pin mutations. This defined the role of pin gene expression and identified other candidate genes associated with hardness. Pina was not expressed in hard wheat with a mutation in the Pina gene. The ratio of Pina to Pinb expression was generally lower in the hard non mutant genotypes. Hardness may be associated with differences in Pin expression and other factors and is not simply associated with mutations in the PIN protein coding sequences. PMID:27741295

Influence of Gene Expression on Hardness in Wheat.

PubMed

Nirmal, Ravi C; Furtado, Agnelo; Wrigley, Colin; Henry, Robert J

2016-01-01

Puroindoline (Pina and Pinb) genes control grain texture or hardness in wheat. Wild-type/soft alleles lead to softer grain while a mutation in one or both of these genes results in a hard grain. Variation in hardness in genotypes with identical Pin alleles (wild-type or mutant) is known but the molecular basis of this is not known. We now report the identification of wheat genotypes with hard grain texture and wild-type/soft Pin alleles indicating that hardness in wheat may be controlled by factors other than mutations in the coding region of the Pin genes. RNA-Seq analysis was used to determine the variation in the transcriptome of developing grains of thirty three diverse wheat genotypes including hard (mutant Pin) and soft (wild type) and those that were hard without having Pin mutations. This defined the role of pin gene expression and identified other candidate genes associated with hardness. Pina was not expressed in hard wheat with a mutation in the Pina gene. The ratio of Pina to Pinb expression was generally lower in the hard non mutant genotypes. Hardness may be associated with differences in Pin expression and other factors and is not simply associated with mutations in the PIN protein coding sequences.

The Effects of Low- and High-Energy Cutoffs on Solar Flare Microwave and Hard X-Ray Spectra

NASA Technical Reports Server (NTRS)

Holman, G. D.; Oegerle, William (Technical Monitor)

2002-01-01

Microwave and hard x-ray spectra provide crucial information about energetic electrons and their environment in solar flares. These spectra are becoming better determined with the Owens Valley Solar Array (OVSA) and the recent launch of the Ramaty High Energy Solar Spectroscopic Imager (RHESSI). The proposed Frequency Agile Solar Radiotelescope (FASR) promises even greater advances in radio observations of solar flares. Both microwave and hard x-ray spectra are sensitive to cutoffs in the electron distribution function. The determination of the high-energy cutoff from these spectra establishes the highest electron energies produced by the acceleration mechanism, while determination of the low-energy cutoff is crucial to establishing the total energy in accelerated electrons. This paper will show computations of the effects of both high- and low-energy cutoffs on microwave and hard x-ray spectra. The optically thick portion of a microwave spectrum is enhanced and smoothed by a low-energy cutoff, while a hard x-ray spectrum is flattened below the cutoff energy. A high-energy cutoff steepens the microwave spectrum and increases the wavelength at which the spectrum peaks, while the hard x-ray spectrum begins to steepen at photon energies roughly an order of magnitude below the electron cutoff energy. This work discusses how flare microwave and hard x-ray spectra can be analyzed together to determine these electron cutoff energies. This work is supported in part by the NASA Sun-Earth Connection Program.

Practical method for appearance match between soft copy and hard copy

NASA Astrophysics Data System (ADS)

Katoh, Naoya

1994-04-01

CRT monitors are often used as a soft proofing device for the hard copy image output. However, what the user sees on the monitor does not match its output, even if the monitor and the output device are calibrated with CIE/XYZ or CIE/Lab. This is especially obvious when correlated color temperature (CCT) of CRT monitor's white point significantly differs from ambient light. In a typical office environment, one uses a computer graphic monitor having a CCT of 9300K in a room of white fluorescent light of 4150K CCT. In such a case, human visual system is partially adapted to the CRT monitor's white point and partially to the ambient light. The visual experiments were performed on the effect of the ambient lighting. Practical method for soft copy color reproduction that matches the hard copy image in appearance is presented in this paper. This method is fundamentally based on a simple von Kries' adaptation model and takes into account the human visual system's partial adaptation and contrast matching.

Mini-Special Issue: Taking Practical Work Beyond the Laboratory.

ERIC Educational Resources Information Center

Hodson, Derek

1998-01-01

Reviews the traditional definition of practical work in science, offers a different definition of it, and points out that practical work is not always laboratory based. Discusses the logistics of coordinating fieldwork. Contains 17 references. (DDR)

Deaf and Hard-of-Hearing Musicians: Crafting a Narrative Strategy

ERIC Educational Resources Information Center

Churchill, Warren N.

2015-01-01

The topic of deafness has been studied in the field of music education; however, this work largely reflects hearing world perspectives. The author of this study, a music educator who identifies as hard-of-hearing, draws upon Deaf cultural discourses as a way of bringing a more nuanced understanding to this topic. The purpose of this study is…

Reducing gravity takes the bounce out of running.

PubMed

Polet, Delyle T; Schroeder, Ryan T; Bertram, John E A

2018-02-13

In gravity below Earth-normal, a person should be able to take higher leaps in running. We asked 10 subjects to run on a treadmill in five levels of simulated reduced gravity and optically tracked centre-of-mass kinematics. Subjects consistently reduced ballistic height compared with running in normal gravity. We explain this trend by considering the vertical take-off velocity (defined as maximum vertical velocity). Energetically optimal gaits should balance the energetic costs of ground-contact collisions (favouring lower take-off velocity), and step frequency penalties such as leg swing work (favouring higher take-off velocity, but less so in reduced gravity). Measured vertical take-off velocity scaled with the square root of gravitational acceleration, following energetic optimality predictions and explaining why ballistic height decreases in lower gravity. The success of work-based costs in predicting this behaviour challenges the notion that gait adaptation in reduced gravity results from an unloading of the stance phase. Only the relationship between take-off velocity and swing cost changes in reduced gravity; the energetic cost of the down-to-up transition for a given vertical take-off velocity does not change with gravity. Because lower gravity allows an elongated swing phase for a given take-off velocity, the motor control system can relax the vertical momentum change in the stance phase, thus reducing ballistic height, without great energetic penalty to leg swing work. Although it may seem counterintuitive, using less 'bouncy' gaits in reduced gravity is a strategy to reduce energetic costs, to which humans seem extremely sensitive. © 2018. Published by The Company of Biologists Ltd.

High-Tech, Hard Work: An Investigation of Teachers' Work in the Digital Age

ERIC Educational Resources Information Center

Selwyn, Neil; Nemorin, Selena; Johnson, Nicola

2017-01-01

This paper explores the ways in which digital technologies are now implicated in the work--and specifically the labour--of school teachers. Drawing upon qualitative studies in two Australian high schools, the paper examines the variety of ways in which teachers' work is now enacted and experienced along digital lines. In particular, the paper…

A soft-hard combination-based cooperative spectrum sensing scheme for cognitive radio networks.

PubMed

Do, Nhu Tri; An, Beongku

2015-02-13

In this paper we propose a soft-hard combination scheme, called SHC scheme, for cooperative spectrum sensing in cognitive radio networks. The SHC scheme deploys a cluster based network in which Likelihood Ratio Test (LRT)-based soft combination is applied at each cluster, and weighted decision fusion rule-based hard combination is utilized at the fusion center. The novelties of the SHC scheme are as follows: the structure of the SHC scheme reduces the complexity of cooperative detection which is an inherent limitation of soft combination schemes. By using the LRT, we can detect primary signals in a low signal-to-noise ratio regime (around an average of -15 dB). In addition, the computational complexity of the LRT is reduced since we derive the closed-form expression of the probability density function of LRT value. The SHC scheme also takes into account the different effects of large scale fading on different users in the wide area network. The simulation results show that the SHC scheme not only provides the better sensing performance compared to the conventional hard combination schemes, but also reduces sensing overhead in terms of reporting time compared to the conventional soft combination scheme using the LRT.

Nicole Schultheiss flies an F/A-18 simulator with NASA engineer Byron Simpson's coaching during Take Your Children to Work Day June 22

NASA Image and Video Library

2004-06-22

Nicole Schultheiss, a fourth-grader at Ulrich Elementary School in California City, "flew" an F/A-18 simulator with NASA engineer Byron Simpson's coaching during Take Your Children to Work Day June 22 at NASA Dryden Flight Research Center.

Effect of raw materials and hardening process on hardness of manually forged knife

NASA Astrophysics Data System (ADS)

Balkhaya, Suwarno

2017-06-01

Knives are normally made by forging process either using a machine or traditional method by means of hammering process. This present work was conducted to study the effects of steel raw materials and hardening process on the hardness of manually forged knives. The knife samples were made by traditional hammering (forging) process done by local blacksmith. Afterward, the samples were heat treated with two different hardening procedures, the first was based on the blacksmith procedure and the second was systematically done at the laboratory. The forging was done in the temperature ranged between 900-950°C, while the final temperature ranged between 650-675°C. The results showed that knives made of spring steel and heat treated in simulated condition at the laboratory obtained higher level of hardness, i.e. 62 HRC. In general, knives heat treated by local blacksmith had lower level of hardness that those obtained from simulated condition. Therefore, we concluded that the traditional knife quality in term of hardness can be improved by optimizing the heat treatment schedule.

Chemical Characterization of Beer Aging Products Derived from Hard Resin Components in Hops (Humulus lupulus L.).

PubMed

Taniguchi, Yoshimasa; Yamada, Makiko; Taniguchi, Harumi; Matsukura, Yasuko; Shindo, Kazutoshi

2015-11-25

The bitter taste of beer originates from resins in hops (Humulus lupulus L.), which are classified into two subtypes (soft and hard). Whereas the nature and reactivity of soft-resin-derived compounds, such as α-, β-, and iso-α-acids, are well studied, there is only a little information on the compounds in hard resin. For this work, hard resin was prepared from stored hops and investigated for its compositional changes in an experimental model of beer aging. The hard resin contained a series of α-acid oxides. Among them, 4'-hydroxyallohumulinones were unstable under beer storage conditions, and their transformation induced primary compositional changes of the hard resin during beer aging. The chemical structures of the products, including novel polycyclic compounds scorpiohumulinols A and B and dicyclohumulinols A and B, were determined by HRMS and NMR analyses. These compounds were proposed to be produced via proton-catalyzed cyclization reactions of 4'-hydroxyallohumulinones. Furthermore, they were more stable than their precursor 4'-hydroxyallohumulinones during prolonged storage periods.

Hard-hard coupling assisted anomalous magnetoresistance effect in amine-ended single-molecule magnetic junction

NASA Astrophysics Data System (ADS)

Tang, Y.-H.; Lin, C.-J.; Chiang, K.-R.

2017-06-01

We proposed a single-molecule magnetic junction (SMMJ), composed of a dissociated amine-ended benzene sandwiched between two Co tip-like nanowires. To better simulate the break junction technique for real SMMJs, the first-principles calculation associated with the hard-hard coupling between a amine-linker and Co tip-atom is carried out for SMMJs with mechanical strain and under an external bias. We predict an anomalous magnetoresistance (MR) effect, including strain-induced sign reversal and bias-induced enhancement of the MR value, which is in sharp contrast to the normal MR effect in conventional magnetic tunnel junctions. The underlying mechanism is the interplay between four spin-polarized currents in parallel and anti-parallel magnetic configurations, originated from the pronounced spin-up transmission feature in the parallel case and spiky transmission peaks in other three spin-polarized channels. These intriguing findings may open a new arena in which magnetotransport and hard-hard coupling are closely coupled in SMMJs and can be dually controlled either via mechanical strain or by an external bias.

Breath-taking jobs: a case-control study of respiratory work disability by occupation in Norway.

PubMed

Fell, A K; Abrahamsen, R; Henneberger, P K; Svendsen, M V; Andersson, E; Torén, K; Kongerud, J

2016-09-01

The current knowledge on respiratory work disability is based on studies that used crude categories of exposure. This may lead to a loss of power, and does not provide sufficient information to allow targeted workplace interventions and follow-up of patients with respiratory symptoms. The aim of this study was to identify occupations and specific exposures associated with respiratory work disability. In 2013, a self-administered questionnaire was mailed to a random sample of the general population, aged 16-50, in Telemark County, Norway. We defined respiratory work disability as a positive response to the survey question: 'Have you ever had to change or leave your job because it affected your breathing?' Occupational exposures were assessed using an asthma-specific job-exposure matrix, and comparison of risks was made for cases and a median of 50 controls per case. 247 workers had changed their work because of respiratory symptoms, accounting for 1.7% of the respondents ever employed. The 'breath-taking jobs' were cooks/chefs: adjusted OR 3.6 (95% CI 1.6 to 8.0); welders: 5.2 (2.0 to 14); gardeners: 4.5 (1.3 to 15); sheet metal workers: 5.4 (2.0 to 14); cleaners: 5.0 (2.2 to 11); hairdressers: 6.4 (2.5 to 17); and agricultural labourers: 7.4 (2.5 to 22). Job changes were also associated with a variety of occupational exposures, with some differences between men and women. Self-report and job-exposure matrix data showed similar findings. For the occupations and exposures associated with job change, preventive measures should be implemented. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Backscatter of hard X-rays in the solar atmosphere. [Calculating the reflectance of solar x ray emission

NASA Technical Reports Server (NTRS)

Bai, T.; Ramaty, R.

1977-01-01

The solar photosphere backscatters a substantial fraction of the hard X rays from solar flares incident upon it. This reflection was studied using a Monte Carlo simulation which takes into account Compton scattering and photo-electric absorption. Both isotropic and anisotropic X ray sources are considered. The bremsstrahlung from an anisotropic distribution of electrons are evaluated. By taking the reflection into account, the inconsistency is removed between recent observational data regarding the center-to-limb variation of solar X ray emission and the predictions of models in which accelerated electrons are moving down toward the photosphere.

Hard X-ray imaging from Explorer

NASA Technical Reports Server (NTRS)

Grindlay, J. E.; Murray, S. S.

1981-01-01

Coded aperture X-ray detectors were applied to obtain large increases in sensitivity as well as angular resolution. A hard X-ray coded aperture detector concept is described which enables very high sensitivity studies persistent hard X-ray sources and gamma ray bursts. Coded aperture imaging is employed so that approx. 2 min source locations can be derived within a 3 deg field of view. Gamma bursts were located initially to within approx. 2 deg and X-ray/hard X-ray spectra and timing, as well as precise locations, derived for possible burst afterglow emission. It is suggested that hard X-ray imaging should be conducted from an Explorer mission where long exposure times are possible.

Nanoparticle hardness controls the internalization pathway for drug delivery

NASA Astrophysics Data System (ADS)

Li, Ye; Zhang, Xianren; Cao, Dapeng

2015-01-01

Nanoparticle (NP)-based drug delivery systems offer fundamental advantages over current therapeutic agents that commonly display a longer circulation time, lower toxicity, specific targeted release, and greater bioavailability. For successful NP-based drug delivery it is essential that the drug-carrying nanocarriers can be internalized by the target cells and transported to specific sites, and the inefficient internalization of nanocarriers is often one of the major sources for drug resistance. In this work, we use the dissipative particle dynamics simulation to investigate the effect of NP hardness on their internalization efficiency. Three simplified models of NP platforms for drug delivery, including polymeric NP, liposome and solid NP, are designed here to represent increasing nanocarrier hardness. Simulation results indicate that NP hardness controls the internalization pathway for drug delivery. Rigid NPs can enter the cell by a pathway of endocytosis, whereas for soft NPs the endocytosis process can be inhibited or frustrated due to wrapping-induced shape deformation and non-uniform ligand distribution. Instead, soft NPs tend to find one of three penetration pathways to enter the cell membrane via rearranging their hydrophobic and hydrophilic segments. Finally, we show that the interaction between nanocarriers and drug molecules is also essential for effective drug delivery.

Back pain - returning to work

MedlinePlus

... matter what kind of work you do. Long car rides and getting in and out of the car can be hard on your back. If you ... work, consider some of these changes: Adjust your car seat to make it easier to enter, sit ...

Ground hardness and injury in community level Australian football.

PubMed

Twomey, Dara M; Finch, Caroline F; Lloyd, David G; Elliott, Bruce C; Doyle, Tim L A

2012-07-01

To describe the risk and details of injuries associated with ground hardness in community level Australian football (AF). Prospective injury surveillance with periodic objective ground hardness measurement. 112 ground hardness assessments were undertaken using a Clegg hammer at nine locations across 20 grounds, over the 2007 and 2008 AF seasons. Details of 352 injuries sustained by community level players on those grounds were prospectively collected as part of a large randomised controlled trial. The ground location of the injury was matched to the nearest corresponding ground hardness Clegg hammer readings, in gravities (g), which were classified from unacceptably low (<30 g) to unacceptably high hardness (>120 g). Clegg hammer readings ranged from 25 to 301 g. Clegg hammer hardness categories from low/normal to high/normal were associated with the majority of injuries, with only 3.7% (13 injuries) on unacceptably high hardness and 0.3% (1 injury) on the unacceptably low hardness locations. Relative to the preferred range of hardness, the risk of sustaining an injury on low/normal hardness locations was 1.31 (95%CI: 1.06-1.62) times higher and 1.82 (95%CI: 1.17-2.85) times higher on locations with unacceptably high hardness. The more severe injuries occurred with low/normal ground hardness. Despite the low number of injuries, the risk of sustaining an injury on low/normal and unacceptably hard grounds was significantly greater than on the preferred range of hardness. Notably, the severity of the injuries sustained on unacceptably hard grounds was lower than for other categories of hardness. Copyright © 2012 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Taking the Bite out of Bruxism (For Kids)

MedlinePlus

... First Aid & Safety Doctors & Hospitals Videos Recipes for Kids Kids site Sitio para niños How the Body Works ... Taking the Bite Out of Bruxism KidsHealth / For Kids / Taking the Bite Out of Bruxism Print Do ...

Relation between hardness and ultrasonic velocity on pipeline steel welded joints

NASA Astrophysics Data System (ADS)

Carreón, H.; Barrera, G.; Natividad, C.; Salazar, M.; Contreras, A.

2016-04-01

In general, the ultrasonic techniques have been used to determine the mechanical properties of materials based on their relationship with metallurgical characteristics. In this research work, the relationship between ultrasonic wave velocity, hardness and the microstructure of steel pipeline welded joints is investigated. Measurements of ultrasonic wave velocity were made as a function of the location across the weld. Hardness measurements were performed in an attempt to correlate with ultrasonic response. In addition, the coarse and dendritic grain structure of the weld material is extreme and unpredictably anisotropic. Thus, due to the acoustic anisotropy of the crystal, weld material of studied joints is anisotropic too. Such structure is no longer direction-independent to the ultrasonic wave propagation; therefore, the ultrasonic beam deflects and redirects and the wave front becomes distorted. Thus, the use of conventional ultrasonic testing techniques using fixed beam angles is very limited and the application of conventional ultrasonic phased array techniques becomes desirable. This technique is proposed to assist pipeline operators in estimating the hardness through ultrasonic measures to evaluate the susceptibility to stress sulphide cracking and hydrogen-induced cracking due to hard spots in steel pipeline welded joints in service. Sound wave velocity and hardness measurements have been carried out on a steel welded joint. For each section of the welding, weld bead, fusion zone, heat affected zone and base metal were found to correspond particular values of the ultrasound velocity. These results were correlated with electron microscopy observations of the microstructure and sectorial scan view of welded joints by ultrasonic phased array.

The correlation of solar flare hard X-ray bursts with Doppler blueshifted soft X-ray flare emission

NASA Technical Reports Server (NTRS)

Bentley, R. D.; Doschek, G. A.; Simnett, G. M.; Rilee, M. L.; Mariska, J. T.; Culhane, J. L.; Kosugi, T.; Watanabe, T.

1994-01-01

We have investigated the temporal correlation between hard X-ray bursts and the intensity of Doppler blueshifted soft X-ray spectral line emission. We find a strong correlation for many events that have intense blueshifted spectral signatures and some correlation in events with modest blueshifts. The onset of hard X-rays frequently coincides to within a few seconds with the onset of blueshifted emission. The peak intensity of blueshifted emission is frequently close in time to the peak of the hard X-ray emission. Decay rates of the blueshifted and hard X-ray emission are similar, with the decay of the blueshifted emission tending to lag behind the hard X-ray emission in some cases. There are, however, exceptions to these conclusions, and, therefore, the results should not be generalized to all flares. Most of the data for this work were obtained from instruments flown on the Japanese Yohkoh solar spacecraft.

A study of sound balances for the hard of hearing

NASA Astrophysics Data System (ADS)

Mathers, C. D.

Over a period of years, complaints have been received from television viewers, especially those who are hard of hearing, that background sound (e.g., audience laughter, crowd noise, mood music) is often transmitted at too high a level with respect to speech, so that information essential to the understanding of the program is lost. To consider possible solutions to the problem, a working party was set up representing both broadcasters and organizations for the hard of hearing. At early meetings, it was resolved that a series of subjective tests should be carried out to determine what reduction of background levels would be needed to provide a significant improvement in the intelligibility of television speech for viewers with hearing difficulties. The preparation of test tapes and the analysis of results are given.

`Hard science': a career option for socially and societally interested students? Grade 12 students' vocational interest gap explored

NASA Astrophysics Data System (ADS)

Struyf, Annemie; Boeve-de Pauw, Jelle; Van Petegem, Peter

2017-11-01

A key theme in science education research concerns the decline in young peoples' interest in science and the need for professionals in hard science. Goal Congruity Theory posits that an important aspect of the decision whether to pursue hard science for study or as a career is the perception that hard science careers do not fulfil social (working with people) and societal (serving or helping others) interests. In this qualitative study, we explore grade 12 students' perceptions about the social and societal orientation of hard science careers. Furthermore, we investigate the variation in students' social and societal interests. Six focus groups were conducted with 58 grade 12 students in Flanders. Our results indicate that a number of students hold stereotypical views about hard science careers' social orientation, while others believe cooperation with others is an important aspect of hard science careers nowadays. Furthermore, our results show that students believe hard science careers can be societally oriented in the sense that they often associate them with innovation or societal progress. Finally, our results indicate that students may differentiate direct versus indirect societal orientation. These findings contribute to literature regarding social and societal interests and students' perceptions of hard science careers.

Social and Emotional Learning and the Work of Itinerant Teachers of the Deaf and Hard of Hearing

ERIC Educational Resources Information Center

Norman, Nancy; Jamieson, Janet R.

2015-01-01

The study investigated how social and emotional learning (SEL) is reflected in the attitudes, beliefs, and practices of itinerant teachers of the deaf and hard of hearing (ITDHHs). A mixed-methods approach was taken to survey 53 ITDHHs about their comfort with teaching SEL, commitment to ongoing professional development in SEL skills, and…

Observational Aspects of Hard X-ray Polarimetry

NASA Astrophysics Data System (ADS)

Chattopadhyay, Tanmoy

2016-04-01

retrieving polarization information from few of such spectroscopic instruments like RHESSI, INTEGRAL-IBIS, INTEGRAL-SPI. Cadmium Zinc Telluride Imager (CZTI) onboard Astrosat, India's first astronomical mission, is one of such instruments which is expected to provide sensitive polarization measurements for bright X-ray sources. CZTI consists of 64 CZT detector modules, each of which is 5 mm thick and 4 cm × 4 cm in size. Each CZT module is subdivided into 256 pixels with pixel pitch of 2.5 mm. Due to its pixelation nature and significant Compton scattering efficiency at energies beyond 100 keV, CZTI can work as a sensitive Compton polarimeter in hard X-rays. Detailed Geant-4 simulations and polarization experiments with the flight configuration of CZTI show that CZTI will have significant polarization measurement capability for bright sources in hard X-rays. CZTI is primarily a spectroscopic instrument with coded mask imaging. To properly utilize the spectroscopic capabilities of CZT detectors, it is important to generate accurate response matrix for CZTI, which in turn requires precise modelling of the CZT lines shapes for monoenergetic X-ray interaction. CZT detectors show an extended lower energy tail of an otherwise Gaussian line shape due to low mobility and lifetime of the charge carriers. On the other hand, interpixel charge sharing may also contribute to the lower energy tail making the line shape more complicated. We have developed a model to predict the line shapes from CZTI modules taking into account the mobility and lifetime of the charge carriers and charge sharing fractions. The model predicts the line shape quite well and can be used to generate pixel-wise response matrix for CZTI.

Review of intellectual assessment measures for children who are deaf or hard of hearing.

PubMed

Reesman, Jennifer H; Day, Lori A; Szymanski, Christen A; Hughes-Wheatland, Roxanne; Witkin, Gregory A; Kalback, Shawn R; Brice, Patrick J

2014-02-01

Intellectual assessment of children who are deaf or hard of hearing presents unique challenges to the clinician charged with attempting to obtain an accurate representation of the child's skills. Selection of appropriate intellectual assessment instruments requires a working knowledge of the strengths and weaknesses of the measure and what changes in standardized administration might be necessary to accommodate for the needs of children who are deaf or hard of hearing. In the case of some available instruments, there is limited guidance and objective research available examining the performance of children who are deaf or hard of hearing. This review summarizes available information on widely used and most recent editions of intellectual assessment measures with special attention to guidance on accommodations, score interpretation, subtest selection and other test-specific considerations when assessing children who are deaf or hard of hearing. There is much opportunity for further inquiry in the field of intellectual assessment as it applies to children who are deaf or hard of hearing, as many measures have not been closely scrutinized for their appropriate use with this population. Clinicians must recognize inherent difficulties with intellectual assessment measures with children who are deaf or hard of hearing and issues in providing for an accessible and accurate administration of test items. PsycINFO Database Record (c) 2014 APA, all rights reserved.

The Construction of Literate Cultures in Disadvantaged Schools: Teachers' Work, Children's Work.

ERIC Educational Resources Information Center

Comber, Barbara

Recent debates focus on literacy curriculum as if it is separate from teachers' other work, almost at times as if teachers and their contexts are irrelevant to what is the most appropriate literacy pedagogy. Perhaps learning to read and write is not hard work, but teaching is, no matter which theoretical orientation about literacy is adhered to.…

Caretaking as articulation work: the effects of taking up responsibility for a child with asthma on labor force participation.

PubMed

Timmermans, Stefan; Freidin, Betina

2007-10-01

A well-established quantitative literature has documented the financial toll for women's caretaking. Still, we do not know much about the process by which women end up taking on an extensive caretaking role and what they do on a daily basis. Based on in-depth interviews with a convenience sample of fifty caretakers of school aged children with asthma and nine health professionals in the USA, this study examines how health professionals socialize mothers into an intensive caretaking role for their children with asthma, how mothers negotiated and perform that role, and the impact of care work on their labor force participation. Care providers assign broad caretaking tasks that require further articulation work to get the job done. Although mothers care for their children in varied ways, caring for a child with a chronic disease remains a time-consuming activity. Mothers pay a price for the indeterminate nature of articulation work by scaling back their involvement in the paid labor force.

Taking Working Memory Training from the Laboratory into Schools

ERIC Educational Resources Information Center

Holmes, Joni; Gathercole, Susan Elizabeth

2014-01-01

Working memory skills have been shown to be enhanced by adaptive training in several randomised controlled trials. Here, two field trials were conducted in which teachers administered working memory training to their own pupils in school. Twenty-two children aged 8-9?years participated in Trial 1. In Trial 2, 50 children aged 9-11?years with the…

"Always looking for a new balance": toward an understanding of what it takes to continue working while being diagnosed with relapsing-remitting multiple sclerosis.

PubMed

Meide, Hanneke van der; Gorp, Dennis van; van der Hiele, Karin; Visser, Leo

2017-06-22

The aim of this study was to gain insight into the meaning of work in the everyday lives of people with relapsing-remitting multiple sclerosis, and the barriers and facilitators to staying in work. Nineteen employed adults diagnosed with relapsing-remitting multiple sclerosis participated in narrative interviews. All interviews were transcribed and coded for thematic analysis. For people with relapsing-remitting multiple sclerosis, continuing to work was a precarious balancing act. Five themes influenced this balance: becoming familiar with the disease, adjusting expectations, having an understanding and realistic line manager, seeing work as meaningful life activity and strategic considerations. People receiving a diagnosis of relapsing-remitting multiple sclerosis have to refamiliarize themselves with their own body in a meaningful way to be able to continue their work. Rehabilitation professionals can support them herein by taking into account not merely functional capabilities but also identity aspects of the body. Medication that stabilizes symptoms supports making the necessary adjustments. A trusting relationship with the line manager is vital for this adaptation process. Additionally, a match between being adequately challenged by work, while still having the capacity to meet those work demands, is needed, as is long-term financial stability. Implications for rehabilitation Rehabilitation professionals can support employees with relapsing-remitting multiple sclerosis by taking into account not merely functional capabilities but also identity aspects of the body. A trusting relationship with the line manager, including a timely disclosure of the diagnosis, is vital for people with relapsing-remitting multiple sclerosis to remain at work. For people with relapsing-remitting multiple sclerosis, there is a delicate balance between being adequately challenged by work while still having the capacity to meet work demands.

Modeling the Multiband Afterglows of GRB 060614 and GRB 060908: Further Evidence for a Double Power-law Hard Electron Energy Spectrum

NASA Astrophysics Data System (ADS)

Zhang, Q.; Xiong, S. L.; Song, L. M.

2018-04-01

Electrons accelerated in relativistic collisionless shocks are usually assumed to follow a power-law energy distribution with an index of p. Observationally, although most gamma-ray bursts (GRBs) have afterglows that are consistent with p > 2, there are still a few GRBs suggestive of a hard (p < 2) electron energy spectrum. Our previous work showed that GRB 091127 gave strong evidence for a double power-law hard electron energy (DPLH) spectrum with 1 < p 1 < 2, p 2 > 2 and an “injection break” assumed as γ b ∝ γ q in the highly relativistic regime, where γ is the bulk Lorentz factor of the jet. In this paper, we show that GRB 060614 and GRB 060908 provide further evidence for such a DPLH spectrum. We interpret the multiband afterglow of GRB 060614 with the DPLH model in a homogeneous interstellar medium by taking into account a continuous energy injection process, while, for GRB 060908, a wind-like circumburst density profile is used. The two bursts, along with GRB 091127, suggest a similar behavior in the evolution of the injection break, with q ∼ 0.5. Whether this represents a universal law of the injection break remains uncertain and more afterglow observations such as these are needed to test this conjecture.

Test-Taking Engagement in PIAAC. OECD Education Working Papers, No. 133

ERIC Educational Resources Information Center

Goldhammer, Frank; Martens, Thomas; Christoph, Gabriela; Lüdtke, Oliver

2016-01-01

In this study, we investigated how empirical indicators of test-taking engagement can be defined, empirically validated, and used to describe group differences in the context of the Programme of International Assessment of Adult Competences (PIAAC). The approach was to distinguish between disengaged and engaged response behavior by means of…

Take action: influence diversity.

PubMed

Gomez, Norma J

2013-01-01

Increased diversity brings strength to nursing and ANNA. Being a more diverse association will require all of us working together. There is an old proverb that says: "one hand cannot cover the sky; it takes many hands." ANNA needs every one of its members to be a part of the diversity initiative.

Traceability in hardness measurements: from the definition to industry

NASA Astrophysics Data System (ADS)

Germak, Alessandro; Herrmann, Konrad; Low, Samuel

2010-04-01

The measurement of hardness has been and continues to be of significant importance to many of the world's manufacturing industries. Conventional hardness testing is the most commonly used method for acceptance testing and production quality control of metals and metallic products. Instrumented indentation is one of the few techniques available for obtaining various property values for coatings and electronic products in the micrometre and nanometre dimensional scales. For these industries to be successful, it is critical that measurements made by suppliers and customers agree within some practical limits. To help assure this measurement agreement, a traceability chain for hardness measurement traceability from the hardness definition to industry has developed and evolved over the past 100 years, but its development has been complicated. A hardness measurement value not only requires traceability of force, length and time measurements but also requires traceability of the hardness values measured by the hardness machine. These multiple traceability paths are needed because a hardness measurement is affected by other influence parameters that are often difficult to identify, quantify and correct. This paper describes the current situation of hardness measurement traceability that exists for the conventional hardness methods (i.e. Rockwell, Brinell, Vickers and Knoop hardness) and for special-application hardness and indentation methods (i.e. elastomer, dynamic, portables and instrumented indentation).

Impact of needle insertion depth on the removal of hard-tissue debris.

PubMed

Perez, R; Neves, A A; Belladonna, F G; Silva, E J N L; Souza, E M; Fidel, S; Versiani, M A; Lima, I; Carvalho, C; De-Deus, G

2017-06-01

To evaluate the effect of depth of insertion of an irrigation needle tip on the removal of hard-tissue debris using micro-computed tomographic (micro-CT) imaging. Twenty isthmus-containing mesial roots of mandibular molars were anatomically matched based on similar morphological dimensions using micro-CT evaluation and assigned to two groups (n = 10), according to the depth of the irrigation needle tip during biomechanical preparation: 1 or 5 mm short of the working length (WL). The preparation was performed with Reciproc R25 file (tip size 25, .08 taper) and 5.25% NaOCl as irrigant. The final rinse was 17% EDTA followed by bidistilled water. Then, specimens were scanned again, and the matched images of the canals, before and after preparation, were examined to quantify the amount of hard-tissue debris, expressed as the percentage volume of the initial root canal volume. Data were compared statistically using the Mann-Whitney U-test. None of the tested needle insertion depths yielded root canals completely free from hard-tissue debris. The insertion depth exerted a significant influence on debris removal, with a significant reduction in the percentage volume of hard-tissue debris when the needle was inserted 1 mm short of the WL (P < 0.05). The insertion depth of irrigation needles significantly influenced the removal of hard-tissue debris. A needle tip positioned 1 mm short of the WL resulted in percentage levels of hard-tissue debris removal almost three times higher than when positioned 5 mm from the WL. © 2016 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Auxiliary midwives in hard to reach rural areas of Myanmar: filling MCH gaps.

PubMed

Wangmo, Sangay; Suphanchaimat, Rapeepong; Htun, Wai Mar Mar; Tun Aung, Tin; Khitdee, Chiraporn; Patcharanarumol, Walaiporn; Htoon, Pe Thet; Tangcharoensathien, Viroj

2016-09-01

Auxiliary Midwives (AMWs) are community health volunteers supporting the work of midwives, especially maternal and child health services in hard to-reach areas in Myanmar. This paper assessed the contributions of AMW to maternal and child health services, factors influencing their productivity and their willingness to serve the community. The study applied quantitative cross-sectional survey using census method. Total of 1,185 AMWs belonging to three batches: trained prior to 2000, between 2000 and 2011, and in 2012, from 21 townships of 17 states and regions in Myanmar participated in the study. Multiple logit regression was used to examine the impact of age, marital status, education, domicile, recruitment pattern and 'batch of training', on AMW's confidence level in providing care, and their intention to serve the community more than 5 years. All AMWs were able to provide essential maternal and child health services including antenatal care, normal delivery and post-natal care. They could identify and refer high-risk pregnancies to larger health facilities for proper management. On average, 9 deliveries, 11 antenatal and 9 postnatal cases were performed by an AMW during the six months prior to this study. AMWs had a comparative advantage for longer service in hard-to-reach villages where they lived, spoke the same dialect as the locals, understood the socio-cultural dimensions, and were well accepted by the community. Despite these contributions, 90 % of the respondents expressed receiving no adequate supervision, refresher training, replenishment of the AMW kits and transportation cost. AMWs in the elder age group are significantly more confident in taking care of the patients than those in the younger groups. Over 90 % of the respondents intended to stay more than five years in the community. The confidence in catering services appeared to have significant association with a longer period of stay in AMW jobs as evidenced by the odds ratio of 3.5, compared

Supporting Deaf and Hard of Hearing Preschool Students' Emerging ASL Skills: A Bilingual Approach

ERIC Educational Resources Information Center

Mitchiner, Julie; Gough, Michelle

2017-01-01

Helping young deaf and hard of hearing children explore ASL and English is one of the important jobs with which the preschool teachers who work with those children are tasked. Learning ASL and English, the children will become bilingual, fluent in the two languages they will use throughout their lives. Working with two languages requires planning.…

Alternate approach for calculating hardness based on residual indentation depth: Comparison with experiments

NASA Astrophysics Data System (ADS)

Ananthakrishna, G.; K, Srikanth

2018-03-01

features of hardness, namely, increase in the hardness with decreasing indentation depth, and the linear relation between the square of the hardness and the inverse of the indentation depth, for all but 150 nm, deviating for smaller depths. In addition, we also show that it is straightforward to obtain optimized parameter values that give good fit to the hardness data for polycrystalline cold worked copper and single crystals of silver.

Good Ideas at Work for Education. Take Pride in America Program.

ERIC Educational Resources Information Center

Federal Interagency Committee on Education, Washington, DC.

Take Pride in America (TPIA) is a national campaign and partnership between public and private organizations and individuals who are committed to: (1) increasing awareness of the importance of the wise use of our natural and cultural resources; (2) encouraging an attitude of stewardship and responsibility toward our public and private resources;…

Genetic analysis of kernel texture (grain hardness) in a hard red spring wheat (Triticum aestivum L.) bi-parental population

USDA-ARS?s Scientific Manuscript database

Grain hardness is a very important trait in determining wheat market class and also influences milling and baking traits. At the grain Hardness (Ha) locus on chromosome 5DS, there are two primary mutations responsible for conveying a harder kernel texture among U.S. hard red spring wheats: (1) the P...

Measuring the Hardness of Minerals

ERIC Educational Resources Information Center

Bushby, Jessica

2005-01-01

The author discusses Moh's hardness scale, a comparative scale for minerals, whereby the softest mineral (talc) is placed at 1 and the hardest mineral (diamond) is placed at 10, with all other minerals ordered in between, according to their hardness. Development history of the scale is outlined, as well as a description of how the scale is used…

Hard Sphere Simulation by Event-Driven Molecular Dynamics: Breakthrough, Numerical Difficulty, and Overcoming the issues

NASA Astrophysics Data System (ADS)

Isobe, Masaharu

Hard sphere/disk systems are among the simplest models and have been used to address numerous fundamental problems in the field of statistical physics. The pioneering numerical works on the solid-fluid phase transition based on Monte Carlo (MC) and molecular dynamics (MD) methods published in 1957 represent historical milestones, which have had a significant influence on the development of computer algorithms and novel tools to obtain physical insights. This chapter addresses the works of Alder's breakthrough regarding hard sphere/disk simulation: (i) event-driven molecular dynamics, (ii) long-time tail, (iii) molasses tail, and (iv) two-dimensional melting/crystallization. From a numerical viewpoint, there are serious issues that must be overcome for further breakthrough. Here, we present a brief review of recent progress in this area.

Short-term hot hardness characteristics of rolling-element steels

NASA Technical Reports Server (NTRS)

Chevalier, J. L.; Dietrich, M. W.; Zaretsky, E. V.

1972-01-01

Short-term hot hardness studies were performed with five vacuum-melted steels at temperatures from 294 to 887 K (70 to 1140 F). Based upon a minimum Rockwell C hardness of 58, the temperature limitation on all materials studied was dependent on the initial room temperature hardness and the tempering temperature of each material. For the same room temperature hardness, the short-term hot hardness characteristics were identical and independent of material composition. An equation was developed to predict the short-term hardness at temperature as a function of initial room temperature hardness for AISI 52100, as well as the high-speed tool steels.

Nanostructural Evolution of Hard Turning Layers in Carburized Steel

NASA Astrophysics Data System (ADS)

Bedekar, Vikram

The mechanisms of failure for components subjected to contact fatigue are sensitive to the structure and properties of the material surface. Although, the bulk material properties are determined by the steel making, forming and the heat treatment; the near surface material properties are altered during final material removal processes such as hard turning or grinding. Therefore, the ability to optimize, modulate and predict the near surface properties during final metal removal operations would be extremely useful in the enhancement of service life of a component. Hard machining is known to induce severely deformed layers causing dramatic microstructural transformations. These transformations occur via grain refinement or thermal phenomena depending upon cutting conditions. The aim of this work is to engineer the near surface nanoscale structure and properties during hard turning by altering strain, strain rate, temperature and incoming microstructure. The near surface material transformations due to hard turning were studied on carburized SAE 8620 bearing steel. Variations in parent material microstructures were introduced by altering the retained austenite content. The strain, strain rate and temperature achieved during final metal cutting were altered by varying insert geometry, insert wear and cutting speed. The subsurface evolution was quantified by a series of advanced characterization techniques such as transmission electron microscopy (TEM), glancing angle X-ray diffraction (GAXRD), X-ray stress evaluation and nanoindentation which were coupled with numerical modeling. Results showed that the grain size of the nanocrystalline near surface microstructure can be effectively controlled by altering the insert geometry, insert wear, cutting speed and the incoming microstructure. It was also evident that the near surface retained austenite decreased at lower cutting speed indicating transformation due to plastic deformation, while it increased at higher cutting

36 CFR 13.1308 - Harding Icefield Trail.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Harding Icefield Trail. 13... Provisions § 13.1308 Harding Icefield Trail. The Harding Icefield Trail from the junction with the main paved trail near Exit Glacier to the emergency hut near the terminus is closed to— (a) Camping within 1/8 mile...

Using Language ENvironment Analysis to improve outcomes for children who are deaf or hard of hearing.

PubMed

Aragon, Miranda; Yoshinaga-Itano, Christine

2012-11-01

Very little is known about the language environments of children in the United States in non-English-speaking homes. There is currently no published research that analyzes deaf or hard of hearing children in Spanish-speaking households, although the Colorado Home Intervention Program demographics indicate that these households account for 10 to 15% of the population of children who are deaf or hard of hearing. In other geographic regions in the United States, it is likely that the population of deaf and hard of hearing children from Spanish-speaking homes is considerably larger. The Spanish-speaking population in the United States has grown considerably within the last 5 to 10 years and will continue to expand. For these children to receive adequate treatment, research must be conducted to understand their language environment. The Language ENvironment Analysis (LENA) System uses a small recording device to collect, analyze, and sort a child's language environment into multiple categories and analyzes variables such as child vocalizations, adult words, and conversational turn taking. The normative data for the LENA System are from families who are English-speaking. The article demonstrates the feasibility of using the LENA System to gain understanding of the language environment of a child who is deaf or hard of hearing in a Spanish-speaking household. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

The Definition of Giftedness: How Can We Help Promote the Work Ethic in Gifted Students?

ERIC Educational Resources Information Center

Flack, Jerry

2000-01-01

This article discusses the role that "willingness to work" must play in any definition of giftedness. Strategies are provided for promoting the work ethic in gifted students: provide students with models of excellence, provide examples of people who have worked hard and enjoyed their labors, and support meaningful hard work. (CR)

Damping treatment for an aircraft hard-mounted antenna system in a vibroacoustic environment

NASA Astrophysics Data System (ADS)

Tate, Ralph E.; Rupert, Carl L.

1990-10-01

This paper discusses the design, analysis, and testing of 'add-on' damping treatments for the Band 6, 7, 8 radar antenna packages that are hard-mounted on the B-1B Aft Equipment Bay (AEB) where equipment failures are routinely occurring during take-off maneuvers at maximum throttle settings. This damage results from the intense vibroacoustical environment generated by the three-stage afterburning engines. Failure rates have been sufficiently high to warrant a 'quick fix' involving damping treatments that can be installed in a short time with minimal modification to the existing structure.

Hard X-ray imaging spectroscopy of FOXSI microflares

NASA Astrophysics Data System (ADS)

Glesener, Lindsay; Krucker, Sam; Christe, Steven; Buitrago-Casas, Juan Camilo; Ishikawa, Shin-nosuke; Foster, Natalie

2015-04-01

The ability to investigate particle acceleration and hot thermal plasma in solar flares relies on hard X-ray imaging spectroscopy using bremsstrahlung emission from high-energy electrons. Direct focusing of hard X-rays (HXRs) offers the ability to perform cleaner imaging spectroscopy of this emission than has previously been possible. Using direct focusing, spectra for different sources within the same field of view can be obtained easily since each detector segment (pixel or strip) measures the energy of each photon interacting within that segment. The Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket payload has successfully completed two flights, observing microflares each time. Flare images demonstrate an instrument imaging dynamic range far superior to the indirect methods of previous instruments like the RHESSI spacecraft.In this work, we present imaging spectroscopy of microflares observed by FOXSI in its two flights. Imaging spectroscopy performed on raw FOXSI images reveals the temperature structure of flaring loops, while more advanced techniques such as deconvolution of the point spread function produce even more detailed images.

How Does Fluoride Work?

MedlinePlus

... when teeth are growing, it mixes with tooth enamel — that hard coating on your teeth. That prevents ... formed. It works with saliva to protect tooth enamel from plaque and sugars. By using fluoride toothpaste, ...

Handling Hard-to-Manage Behaviours in Pre-School Provision: A Systems Approach

ERIC Educational Resources Information Center

Foot, Hugh; Woolfson, Lisa; Terras, Melody; Norfolk, Claire

2004-01-01

The perceptions and experiences of hard-to-manage behaviours were explored among 32 staff working in a variety of local authority and private nurseries and playgroups. Semi-structured interviews were conducted to ascertain what behaviours in children staff find most challenging, how they were managed and concerns communicated to parents. Results…

Hard breakup of the deuteron into two Δ -isobars

NASA Astrophysics Data System (ADS)

Granados, Carlos; Sargsian, Misak

2011-04-01

Photodisintegration of the deuteron into two Δ-isobars at large center of mass angles is studied within the QCD hard rescattering model (HRM). According to the HRM, the reaction proceeds in three main steps: the photon knocks the quark from one of the nucleons in the deuteron; the struck quark rescatters off a quark from the other nucleon sharing the high energy of the photon; then the energetic quarks recombine into two outgoing baryons emerging at large transverse momenta. Within the HRM, the cross section is expressed through the amplitude of pn --> ΔΔ scattering which we evaluated based on the quark-interchange model of hard hadronic scattering. We predict that the cross section of the deuteron breakup to Δ++Δ- is 4-5 times larger than that of the breakup to the Δ+Δ0 channel. Also, the angular distributions for these two channels are markedly different. These can be compared with the predictions based on the assumption that two hard Δ-isobars are the result of the disintegration of initial ΔΔ components of the deuteron wave function. In this case, the angular distributions and cross sections of the breakup in both Δ++Δ- and Δ+Δ0 channels are expected to be similar. This work was supported by U.S. Department of Energy Grant under contract DE-FG02-01ER41172, and by the FIU DEA program.

Stability of smectic phases in hard-rod mixtures

NASA Astrophysics Data System (ADS)

Martínez-Ratón, Yuri; Velasco, Enrique; Mederos, Luis

2005-09-01

Using density-functional theory, we have analyzed the phase behavior of binary mixtures of hard rods of different lengths and diameters. Previous studies have shown a strong tendency of smectic phases of these mixtures to segregate and, in some circumstances, to form microsegregated phases. Our focus in the present work is on the formation of columnar phases which some studies, under some approximations, have shown to become thermodynamically stable prior to crystallization. Specifically we focus on the relative stability between smectic and columnar phases, a question not fully addressed in previous work. Our analysis is based on two complementary perspectives: on the one hand, an extended Onsager theory, which includes the full orientational degrees of freedom but with spatial and orientational correlations being treated in an approximate manner; on the other hand, we formulate a Zwanzig approximation of fundamental-measure theory on hard parallelepipeds, whereby orientations are restricted to be only along three mutually orthogonal axes, but correlations are faithfully represented. In the latter case novel, complete phase diagrams containing regions of stability of liquid-crystalline phases are calculated. Our findings indicate that the restricted-orientation approximation enhances the stability of columnar phases so as to preempt smectic order completely while, in the framework of the extended Onsager model, with full orientational degrees of freedom taken into account, columnar phases may preempt a large region of smectic stability in some mixtures, but some smectic order still persists.

FATIGUE OF BIOMATERIALS: HARD TISSUES

PubMed Central

Arola, D.; Bajaj, D.; Ivancik, J.; Majd, H.; Zhang, D.

2009-01-01

The fatigue and fracture behavior of hard tissues are topics of considerable interest today. This special group of organic materials comprises the highly mineralized and load-bearing tissues of the human body, and includes bone, cementum, dentin and enamel. An understanding of their fatigue behavior and the influence of loading conditions and physiological factors (e.g. aging and disease) on the mechanisms of degradation are essential for achieving lifelong health. But there is much more to this topic than the immediate medical issues. There are many challenges to characterizing the fatigue behavior of hard tissues, much of which is attributed to size constraints and the complexity of their microstructure. The relative importance of the constituents on the type and distribution of defects, rate of coalescence, and their contributions to the initiation and growth of cracks, are formidable topics that have not reached maturity. Hard tissues also provide a medium for learning and a source of inspiration in the design of new microstructures for engineering materials. This article briefly reviews fatigue of hard tissues with shared emphasis on current understanding, the challenges and the unanswered questions. PMID:20563239

Hard and soft acids and bases: structure and process.

PubMed

Reed, James L

2012-07-05

Under investigation is the structure and process that gives rise to hard-soft behavior in simple anionic atomic bases. That for simple atomic bases the chemical hardness is expected to be the only extrinsic component of acid-base strength, has been substantiated in the current study. A thermochemically based operational scale of chemical hardness was used to identify the structure within anionic atomic bases that is responsible for chemical hardness. The base's responding electrons have been identified as the structure, and the relaxation that occurs during charge transfer has been identified as the process giving rise to hard-soft behavior. This is in contrast the commonly accepted explanations that attribute hard-soft behavior to varying degrees of electrostatic and covalent contributions to the acid-base interaction. The ability of the atomic ion's responding electrons to cause hard-soft behavior has been assessed by examining the correlation of the estimated relaxation energies of the responding electrons with the operational chemical hardness. It has been demonstrated that the responding electrons are able to give rise to hard-soft behavior in simple anionic bases.

Hard x ray imaging graphics development and literature search

NASA Technical Reports Server (NTRS)

Emslie, A. Gordon

1991-01-01

This report presents work performed between June 1990 and June 1991 and has the following objectives: (1) a comprehensive literature search of imaging technology and coded aperture imaging as well as relevant topics relating to solar flares; (2) an analysis of random number generators; and (3) programming simulation models of hard x ray telescopes. All programs are compatible with NASA/MSFC Space Science LAboratory VAX Cluster and are written in VAX FORTRAN and VAX IDL (Interactive Data Language).

Risk-taking orientation and injury among youth workers: examining the social influence of supervisors, coworkers, and parents.

PubMed

Westaby, James D; Lowe, J Krister

2005-09-01

Despite youths' susceptibility to social influence, little research has examined the extent to which social factors impact youths' risk-taking orientation and injury at work. Drawing on social influence and behavioral intention theories, this study hypothesized that perceived supervisory influence, coworker risk taking, and parental risk taking serve as key exogenous variables of risk-taking orientation at work. Risk-taking orientation was further hypothesized to serve as a direct predictor and full mediator of work injury. The effect of parental risk taking was also hypothesized to be mediated through global risk taking, which in turn was posited to predict risk-taking orientation at work. Longitudinal results from 2,542 adolescents working across a wide spectrum of jobs supported hypothesized linkages, although there was some evidence of partially mediated mechanisms. Coworker risk taking was a relatively strong predictor of youths' risk-taking orientation at work. Copyright 2005 APA, all rights reserved.

Correlating particle hardness with powder compaction performance.

PubMed

Cao, Xiaoping; Morganti, Mikayla; Hancock, Bruno C; Masterson, Victoria M

2010-10-01

Assessing particle mechanical properties of pharmaceutical materials quickly and with little material can be very important to early stages of pharmaceutical research. In this study, a wide range of pharmaceutical materials were studied using atomic force microscopy (AFM) nanoindentation. A significant amount of particle hardness and elastic modulus data were provided. Moreover, powder compact mechanical properties of these materials were investigated in order to build correlation between the particle hardness and powder compaction performance. It was found that the materials with very low or high particle hardness most likely exhibit poor compaction performance while the materials with medium particle hardness usually have good compaction behavior. Additionally, the results from this study enriched Hiestand's special case concept on particle hardness and powder compaction performance. This study suggests that the use of AFM nanoindentation can help to screen mechanical properties of pharmaceutical materials at early development stages of pharmaceutical research.

Improvement of Strength-Toughness-Hardness Balance in Large Cross-Section 718H Pre-Hardened Mold Steel

PubMed Central

Liu, Hanghang; Fu, Paixian; Liu, Hongwei; Li, Dianzhong

2018-01-01

The strength-toughness combination and hardness uniformity in large cross-section 718H pre-hardened mold steel from a 20 ton ingot were investigated with three different heat treatments for industrial applications. The different microstructures, including tempered martensite, lower bainite, and retained austenite, were obtained at equivalent hardness. The microstructures were characterized by using metallographic observations, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and electron back-scattered diffraction (EBSD). The mechanical properties were compared by tensile, Charpy U-notch impact and hardness uniformity tests at room temperature. The results showed that the test steels after normalizing-quenching-tempering (N-QT) possessed the best strength-toughness combination and hardness uniformity compared with the conventional quenched-tempered (QT) steel. In addition, the test steel after austempering-tempering (A-T) demonstrated the worse hardness uniformity and lower yield strength while possessing relatively higher elongation (17%) compared with the samples after N-QT (14.5%) treatments. The better ductility of A-T steel mainly depended on the amount and morphology of retained austenite and thermal/deformation-induced twined martensite. This work elucidates the mechanisms of microstructure evolution during heat treatments and will highly improve the strength-toughness-hardness trade-off in large cross-section steels. PMID:29642642

Double hard scattering without double counting

NASA Astrophysics Data System (ADS)

Diehl, Markus; Gaunt, Jonathan R.; Schönwald, Kay

2017-06-01

Double parton scattering in proton-proton collisions includes kinematic regions in which two partons inside a proton originate from the perturbative splitting of a single parton. This leads to a double counting problem between single and double hard scattering. We present a solution to this problem, which allows for the definition of double parton distributions as operator matrix elements in a proton, and which can be used at higher orders in perturbation theory. We show how the evaluation of double hard scattering in this framework can provide a rough estimate for the size of the higher-order contributions to single hard scattering that are affected by double counting. In a numeric study, we identify situations in which these higher-order contributions must be explicitly calculated and included if one wants to attain an accuracy at which double hard scattering becomes relevant, and other situations where such contributions may be neglected.

Hard X-ray Detectability of Small Impulsive Heating Events in the Solar Corona

NASA Astrophysics Data System (ADS)

Glesener, L.; Klimchuk, J. A.; Bradshaw, S. J.; Marsh, A.; Krucker, S.; Christe, S.

2015-12-01

Impulsive heating events ("nanoflares") are a candidate to supply the solar corona with its ~2 MK temperature. These transient events can be studied using extreme ultraviolet and soft X-ray observations, among others. However, the impulsive events may occur in tenuous loops on small enough timescales that the heating is essentially not observed due to ionization timescales, and only the cooling phase is observed. Bremsstrahlung hard X-rays could serve as a more direct and prompt indicator of transient heating events. A hard X-ray spacecraft based on the direct-focusing technology pioneered by the Focusing Optics X-ray Solar Imager (FOXSI) sounding rocket could search for these direct signatures. In this work, we use the hydrodynamical EBTEL code to simulate differential emission measures produced by individual heating events and by ensembles of such events. We then directly predict hard X-ray spectra and consider their observability by a future spaceborne FOXSI, and also by the RHESSI and NuSTAR spacecraft.

[Working conditions of community nurses].

PubMed

Kułagowska, Ewa; Kosińska, Maria

2010-01-01

To ensure the most efficient workplace health promotion it is essential to identify and monitor health conditions of employees and all components of the work process, as well as to recognize their cause-effect relationships. Community nurses form an occupational group with a specific type of workplace that is usually located in the patient's place of residence and thus not inspected in terms of safety and hygiene. The aim of the study was to identify working conditions of community nurses with special reference to occupational hazards. An anonymous questionnaire was used as a major tool of this survey. It contained 33 questions, concerning the work process, working conditions, work loads and arduousness, hazards and work-related complaints. The questionnaire was completed by 86 community nurses working in the Upper Silesia region. Community nurses generally assessed their work as hard. A more thorough analysis revealed that nursing and curative care, nursing and hygienic care and rehabilitation were regarded by community nurses as hard, whereas social diagnostics and curative diagnostics were assessed as much easier tasks. Excessive physical load, forced position at work, aggressive patients, patients' aggressive family members, dangerous domestic animals, low quality of technical devices in patients' homes were reported as the greatest hazards. The obtained results reveal that working conditions of community nurses do not ensure their safety at work.

Eddy Current, Magnetic Particle and Hardness Testing, Aviation Quality Control (Advanced): 9227.04.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

This unit of instruction includes the principles of eddy current, magnetic particle and hardness testing; standards used for analyzing test results; techniques of operating equipment; interpretation of indications; advantages and limitations of these methods of testing; care and calibration of equipment; and safety and work precautions. Motion…

Analysis of Hard Thin Film Coating

NASA Technical Reports Server (NTRS)

Shen, Dashen

1998-01-01

Marshall Space Flight Center (MSFC) is interested in developing hard thin film coating for bearings. The wearing of the bearing is an important problem for space flight engine. Hard thin film coating can drastically improve the surface of the bearing and improve the wear-endurance of the bearing. However, many fundamental problems in surface physics, plasma deposition, etc, need further research. The approach is using Electron Cyclotron Resonance Chemical Vapor Deposition (ECRCVD) to deposit hard thin film on stainless steel bearing. The thin films in consideration include SiC, SiN and other materials. An ECRCVD deposition system is being assembled at MSFC.

Analysis of Hard Thin Film Coating

NASA Technical Reports Server (NTRS)

Shen, Dashen

1998-01-01

MSFC is interested in developing hard thin film coating for bearings. The wearing of the bearing is an important problem for space flight engine. Hard thin film coating can drastically improve the surface of the bearing and improve the wear-endurance of the bearing. However, many fundamental problems in surface physics, plasma deposition, etc, need further research. The approach is using electron cyclotron resonance chemical vapor deposition (ECRCVD) to deposit hard thin film an stainless steel bearing. The thin films in consideration include SiC, SiN and other materials. An ECRCVD deposition system is being assembled at MSFC.

Hard convex lens-shaped particles: Densest-known packings and phase behavior

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cinacchi, Giorgio, E-mail: giorgio.cinacchi@uam.es; Torquato, Salvatore, E-mail: torquato@princeton.edu

2015-12-14

By using theoretical methods and Monte Carlo simulations, this work investigates dense ordered packings and equilibrium phase behavior (from the low-density isotropic fluid regime to the high-density crystalline solid regime) of monodisperse systems of hard convex lens-shaped particles as defined by the volume common to two intersecting congruent spheres. We show that, while the overall similarity of their shape to that of hard oblate ellipsoids is reflected in a qualitatively similar phase diagram, differences are more pronounced in the high-density crystal phase up to the densest-known packings determined here. In contrast to those non-(Bravais)-lattice two-particle basis crystals that are themore » densest-known packings of hard (oblate) ellipsoids, hard convex lens-shaped particles pack more densely in two types of degenerate crystalline structures: (i) non-(Bravais)-lattice two-particle basis body-centered-orthorhombic-like crystals and (ii) (Bravais) lattice monoclinic crystals. By stacking at will, regularly or irregularly, laminae of these two crystals, infinitely degenerate, generally non-periodic in the stacking direction, dense packings can be constructed that are consistent with recent organizing principles. While deferring the assessment of which of these dense ordered structures is thermodynamically stable in the high-density crystalline solid regime, the degeneracy of their densest-known packings strongly suggests that colloidal convex lens-shaped particles could be better glass formers than colloidal spheres because of the additional rotational degrees of freedom.« less

Injury risk associated with ground hardness in junior cricket.

PubMed

Twomey, Dara M; White, Peta E; Finch, Caroline F

2012-03-01

To establish if there is an association between ground hardness and injury risk in junior cricket. Nested case-series of players who played matches on specific grounds with objective ground hardness measures, within a prospective cohort study of junior community club cricket players. Monitoring of injuries and playing exposure occurred during 434 matches over the 2007/2008 playing season. Objective assessment of the hardness of 38 grounds was undertaken using a Clegg hammer at 13 sites on 19 different junior cricket grounds on the match eve across the season. Hardness readings were classified from unacceptably low (<30 g) to unacceptably high (>120 g) and two independent raters assessed the likelihood of each injury being related to ground hardness. Injuries sustained on tested grounds were related to the ground hardness measures. Overall, 31 match injuries were reported; 6.5% were rated as likely to be related to ground hardness, 16.1% as possibly related and 74.2% as unlikely to be related and 3.2% unknown. The two injuries likely to be related to ground hardness were sustained whilst diving to catch a ball resulting, in a graze/laceration from contact with hard ground. Overall, 31/38 (82%) ground assessments were rated as having 'unacceptably high' hardness and all others as 'high/normal' hardness. Only one injury occurred on an objectively tested ground. It remains unclear if ground hardness is a contributing factor to the most common injury mechanism of being struck by the ball, and needs to be confirmed in future larger-scale studies. Copyright © 2011 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

'It is hard for mums to put themselves first': how mothers diagnosed with breast cancer manage the sociological boundaries between paid work, family and caring for the self.

PubMed

Mackenzie, Catherine Ruth

2014-09-01

This paper aims to increase understanding of how mothers diagnosed with breast cancer while in the paid workforce experience and manage their multiple demands of taking care of themselves, their children and their paid work. In-depth, semi-structured interviews were conducted with 32 women who were mothers of dependent children and in the paid workforce at the time of their breast cancer diagnosis. The sample includes women living in urban and rural Australia. The study found that after a breast cancer diagnosis, participants tended to prioritise their health and wellbeing over paid work. Yet dominance of gendered identity meant that they tended to place the needs of family, especially children, above their own health and wellbeing. The key factors that influenced mothers' decisions to continue in, return to, or leave paid work after a breast cancer diagnosis included: a change in perspective regarding what was important in their lives; level of support from the workplace and home; the extent to which participating in paid work was a financial necessity; the extent to which their identity was connected to paid work, and; ongoing level of pain or fatigue. The paper concludes that using the sociological concepts of the fateful moment, boundary maintenance and a feminist ethic of care produces a more nuanced understanding of women's participation in paid work after breast cancer than examining paid workforce participation, or unpaid responsibilities and mothering, separately. The nature of the permeability or malleability of boundaries between work, family and taking care of the self affects women's participation in paid work during and/or after breast cancer treatment. Increased boundary permeability or malleability brought about more by cooperation than conflict facilitated positive experiences of re-negotiating boundaries, whereas increased permeability or malleability brought about more by conflict than cooperation created difficulties for women in finding an

Models of Alcohol and Other Drug Treatment for Consideration When Working with Deaf and Hard of Hearing Individuals.

ERIC Educational Resources Information Center

Guthmann, Debra

This paper discusses several models for treating chemical dependency in individuals who are deaf or hard of hearing. It begins by describing the 12-step model, a comprehensive, multi-disciplinary approach to the treatment of addiction which is abstinence oriented and based on the principles of Alcoholics Anonymous. This model includes group…

Effect of repeated cycles of chemical disinfection on the roughness and hardness of hard reline acrylic resins.

PubMed

Pinto, Luciana de Rezende; Acosta, Emílio José T Rodríguez; Távora, Flora Freitas Fernandes; da Silva, Paulo Maurício Batista; Porto, Vinícius Carvalho

2010-06-01

The aim of this study was to assess the effect of repeated cycles of five chemical disinfectant solutions on the roughness and hardness of three hard chairside reliners. A total of 180 circular specimens (30 mm x 6 mm) were fabricated using three hard chairside reliners (Jet; n = 60, Kooliner; n = 60, Tokuyama Rebase II Fast; n = 60), which were immersed in deionised water (control), and five disinfectant solutions (1%, 2%, 5.25% sodium hypochlorite; 2% glutaraldehyde; 4% chlorhexidine gluconate). They were tested for Knoop hardness (KHN) and surface roughness (microm), before and after 30 simulated disinfecting cycles. Data was analysed by the factorial scheme (6 x 2), two-way analysis of variance (anova), followed by Tukey's test. For Jet (from 18.74 to 13.86 KHN), Kooliner (from 14.09 to 8.72 KHN), Tokuyama (from 12.57 to 8.28 KHN) a significant decrease in hardness was observed irrespective of the solution used on all materials. For Jet (from 0.09 to 0.11 microm) there was a statistically significant increase in roughness. Kooliner (from 0.36 to 0.26 microm) presented a statistically significant decrease in roughness and Tokuyama (from 0.15 to 0.11 microm) presented no statistically significant difference after 30 days. This study showed that all disinfectant solutions promoted a statistically significant decrease in hardness, whereas with roughness, the materials tested showed a statistically significant increase, except for Tokuyama. Although statistically significant values were registered, these results could not be considered clinically significant.

Meeting the Challenge: Recruiting and Retaining Teachers in Hard-to-Staff Schools

ERIC Educational Resources Information Center

American Federation of Teachers, 2007

2007-01-01

Teacher turnover is significantly higher in hard-to-staff schools, and it is costly. Not only are billions of dollars spent annually to recruit and train new teachers, but students who are denied the best education possible often enter the workforce at a disadvantage. The problem demands strategies that work. This report identifies examples and…

Education of the Deaf and Hard of Hearing in the Digital Era

ERIC Educational Resources Information Center

Denham, Percival J.; Battro, Antonio M.

2012-01-01

The education of the deaf and hard of hearing has been the aim and inspiration of many technological discoveries and developments. Since the early work of Alexander Graham Bell, a visionary in special education for the deaf, many relevant innovations have considerably improved the quality of life and the professional opportunities for deaf people…

How You Can Take Medicine Safely | NIH MedlinePlus the Magazine

MedlinePlus

... your prescription to a different one that will work better for you. Use a memory aid to take your medicines on time. Some people use mealtime or bedtime as a reminder to take their medicine. Other people ... Find a system that works for you. Do not skip doses of medication ...

Health Insurance Coverage and Take-Up: Lessons from Behavioral Economics

PubMed Central

Baicker, Katherine; Congdon, William J; Mullainathan, Sendhil

2012-01-01

Context Millions of uninsured Americans ostensibly have insurance available to them—many at very low cost—but do not take it up. Traditional economic analysis is based on the premise that these are rational decisions, but it is hard to reconcile observed enrollment patterns with this view. The policy prescriptions that the traditional model generates may thus fail to achieve their goals. Behavioral economics, which integrates insights from psychology into economic analysis, identifies important deviations from the traditional assumptions of rationality and can thus improve our understanding of what drives health insurance take-up and improved policy design. Methods Rather than a systematic review of the coverage literature, this article is a primer for considering issues in health insurance coverage from a behavioral economics perspective, supplementing the standard model. We present relevant evidence on decision making and insurance take-up and use it to develop a behavioral approach to both the policy problem posed by the lack of health insurance coverage and possible policy solutions to that problem. Findings We found that evidence from behavioral economics can shed light on both the sources of low take-up and the efficacy of different policy levers intended to expand coverage. We then applied these insights to policy design questions for public and private insurance coverage and to the implementation of the recently enacted health reform, focusing on the use of behavioral insights to maximize the value of spending on coverage. Conclusions We concluded that the success of health insurance coverage reform depends crucially on understanding the behavioral barriers to take-up. The take-up process is likely governed by psychology as much as economics, and public resources can likely be used much more effectively with behaviorally informed policy design. PMID:22428694

Galactic Black Holes in the Hard State: A Multi-Wavelength View of Accretion and Ejection

NASA Technical Reports Server (NTRS)

Kalemci; Tomsick, John A.; Migliari; Corbel; Markoff

2010-01-01

The canonical hard state is associated with emission from all three fundamental accretion components: the accretion disk, the hot accretion disk corona and the jet. On top of these, the hard state also hosts very rich temporal variability properties (low frequency QPOs in the PDS, time lags, long time scale evolution). Our group has been working on the major questions of the hard state both observationally (with mult i-wavelength campaigns using RXTE, Swift, Suzaku, Spitzer, VLA, ATCA, SMARTS) and theoretically (through jet models that can fit entire SEDs). Through spectral and temporal analysis we seek to determine the geometry of accretion components, and relate the geometry to the formation and emission from a jet. In this presentation I will review the recent contributions of our group to the field, including the Swift results on the disk geometry at low accretion rates, the jet model fits to the hard state SEDs (including Spitzer data) of GRO J1655-40, and the final results on the evolution of spectral (including X-ray, radio and infrared) and temporal properties of elected black holes in the hard states. I will also talk about impact of ASTROSAT to the science objective of our group.

Search for Hard X-Ray Emission from the Soft X-Ray Transient Aquila X-1

NASA Astrophysics Data System (ADS)

Harmon, B. A.; Zhang, S. N.; Paciesas, W. S.; Tavani, M.; Kaaret, P.; Ford, E.

1994-12-01

We are investigating the possibility of hard x-ray emission from the recurrent soft x-ray transient and x-ray burst source Aquila X-1 (Aql X-1). Outbursts of this source are relatively frequent with a spacing of ~ 4-10 months (Kitamoto, S. et al. 1993, ApJ, 403, 315). The recent detections of hard tails (\\(>\\)20 keV) in low luminosity x-ray bursters (Barret, D. & Vedrenne, G. 1994, ApJ Supp. S. 92, 505) suggest that neutron star transient systems such as Aql X-1 can produce hard x-ray emission which is detectable by BATSE. We are correlating reported optical and soft x-ray observations since 1991 of Aql X-1 with BATSE observations in order to search for hard x-ray emission episodes, and to study their temporal and spectral evolution. We will present preliminary results of this search in the 20-1000 keV band using the Earth occultation technique applied to the large area detectors. If this work is successful, we hope to alert the astronomical community for the next Aql X-1 outburst expected in 1995. Simultaneous x-ray/hard x-ray and optical observations of Aql X-1 during outburst would be of great importance for the modeling of soft x-ray transients and related systems.

Experimental investigation on hard turning of AISI 4340 steel using cemented coated carbide insert

NASA Astrophysics Data System (ADS)

Pradeep Kumar, J.; Kishore, K. P.; Ranjith Kumar, M.; Saran Karthick, K. R.; Vishnu Gowtham, S.

2018-02-01

Hard turning is a developing technology that offers many potential advantages compared to grinding, which remains the standard finishing process for critical hardened surfaces. In this work, an attempt has been made to experimentally investigate hard turning of AISI 4340 steel under wet and dry condition using cemented coated carbide insert. Hardness of the workpiece material is tested using Brinell and Rockwell hardness testers. CNC LATHE and cemented coated carbide inserts of designation CNMG 120408 are used for conducting experimental trials. Significant cutting parameters like cutting speed, feed rate and depth of cut are considered as controllable input parameters and surface roughness (Ra), tool wear are considered as output response parameters. Design of experiments is carried out with the help of Taguchi’s L9 orthogonal array. Results of response parameters like surface roughness and tool wear under wet and dry condition are analysed. It is found that surface roughness and tool wear are higher under dry machining condition when compared to wet machining condition. Feed rate significantly influences the surface roughness followed by cutting speed. Depth of cut significantly influences the tool wear followed by cutting speed.

Taking Care of Yourself: Stress and the Librarian

ERIC Educational Resources Information Center

Spencer, Roxanne Myers

2013-01-01

Stress is a part of our working lives and is not likely to decrease in tomorrow's workplace. A difficult economy, downsizing, taking on additional responsibilities without assistance or additional pay--all are taking their toll on our physical, mental, and emotional well-being. Community college librarians can often feel isolated as the only…

Novel hard compositions and methods of preparation

DOEpatents

Sheinberg, H.

1981-02-03

Novel very hard compositions of matter are prepared by using in all embodiments only a minor amount of a particular carbide (or materials which can form the carbide in situ when subjected to heat and pressure); and no strategic cobalt is needed. Under a particular range of conditions, densified compositions of matter of the invention are prepared having hardnesses on the Rockwell A test substantially equal to the hardness of pure tungsten carbide and to two of the hardest commercial cobalt-bonded tungsten carbides. Alternately, other compositions of the invention which have slightly lower hardnesses than those described above in one embodiment also possess the advantage of requiring no tungsten and in another embodiment possess the advantage of having a good fracture toughness value.

21 CFR 133.150 - Hard cheeses.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Hard cheeses. 133.150 Section 133.150 Food and... CONSUMPTION CHEESES AND RELATED CHEESE PRODUCTS Requirements for Specific Standardized Cheese and Related Products § 133.150 Hard cheeses. (a) The cheeses for which definitions and standards of identity are...

7 CFR 201.30 - Hard seed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 3 2011-01-01 2011-01-01 false Hard seed. 201.30 Section 201.30 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Vegetable Seeds § 201.30 Hard...

7 CFR 201.30 - Hard seed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Hard seed. 201.30 Section 201.30 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Vegetable Seeds § 201.30 Hard...

7 CFR 201.30 - Hard seed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Hard seed. 201.30 Section 201.30 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Vegetable Seeds § 201.30 Hard...

7 CFR 201.30 - Hard seed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Hard seed. 201.30 Section 201.30 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Vegetable Seeds § 201.30 Hard...

7 CFR 201.30 - Hard seed.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Hard seed. 201.30 Section 201.30 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling Vegetable Seeds § 201.30 Hard...

Multimedia Storybooks: Supporting Vocabulary for Students Who Are Deaf/Hard-of-Hearing

ERIC Educational Resources Information Center

Donne, Vicki; Briley, Margaret L.

2015-01-01

A single case study examined the use of multimedia storybooks on the vocabulary acquisition of 7 preschool students who are deaf/hard of hearing in two classrooms at a school for the deaf in the U.S. Participants also included 3 speech-language pathologists. Students spent an average of 7.1 minutes daily working with the multimedia storybooks and…

Xylem monoterpenes of some hard pines of Western North America: three studies

Treesearch

Richard H. Smith

1982-01-01

Monoterpene composition was studied in a number of hard pine species and results were compared with earlier work. (1) Intratree measurements showed strong constancy of composition in both single-stemmed and forked trees of ponderosa, Jeffrey, Coulter, and Jeffrey x ponderosa pines. In grafts of these and other pines, the scion influenced the root stock, but not the...

Theory of hard diffraction and rapidity gaps

DOE Office of Scientific and Technical Information (OSTI.GOV)

Del Duca, V.

1996-02-01

In this talk we review the models describing the hard diffractive production of jets or more generally high-mass states in presence of rapidity gaps in hadron-hadron and lepton-hadron collisions. By rapidity gaps we mean regions on the lego plot in (pseudo)-rapidity and azimuthal angle where no hadrons are produced, between the jet(s) and an elastically scattered hadron (single hard diffraction) or between two jets (double hard diffraction). {copyright} {ital 1996 American Institute of Physics.}

"X-Ray Transients in Star-Forming Regions" and "Hard X-Ray Emission from X-Ray Bursters"

NASA Technical Reports Server (NTRS)

Halpern, Jules P.; Kaaret, Philip

1999-01-01

This grant funded work on the analysis of data obtained with the Burst and Transient Experiment (BATSE) on the Compton Gamma-Ray Observatory. The goal of the work was to search for hard x-ray transients in star forming regions using the all-sky hard x-ray monitoring capability of BATSE. Our initial work lead to the discovery of a hard x-ray transient, GRO J1849-03. Follow-up observations of this source made with the Wide Field Camera on BeppoSAX showed that the source should be identified with the previously known x-ray pulsar GS 1843-02 which itself is identified with the x-ray source X1845-024 originally discovered with the SAS-3 satellite. Our identification of the source and measurement of the outburst recurrence time, lead to the identification of the source as a Be/X-ray binary with a spin period of 94.8 s and an orbital period of 241 days. The funding was used primarily for partial salary and travel support for John Tomsick, then a graduate student at Columbia University. John Tomsick, now Dr. Tomsick, received his Ph.D. from Columbia University in July 1999, based partially on results obtained under this investigation. He is now a postdoctoral research scientist at the University of California, San Diego.

Enhancing the Hardness of Sintered SS 17-4PH Using Nitriding Process for Bracket Orthodontic Application

NASA Astrophysics Data System (ADS)

Suharno, B.; Supriadi, S.; Ayuningtyas, S. T.; Widjaya, T.; Baek, E. R.

2018-01-01

Brackets orthodontic create teeth movement by applying force from wire to bracket then transferred to teeth. However, emergence of friction between brackets and wires reduces load for teeth movement towards desired area. In order to overcome these problem, surface treatment like nitriding chosen as a process which could escalate efficiency of transferred force by improving material hardness since hard materials have low friction levels. This work investigated nitriding treatment to form nitride layer which affecting hardness of sintered SS 17-4PH. The nitride layers produced after nitriding process at various temperature i.e. 470°C, 500°C, 530°C with 8hr holding time under 50% NH3 atmosphere. Optical metallography was conducted to compare microstructure of base and surface metal while the increasing of surface hardness then observed using vickers microhardness tester. Hardened surface layer was obtained after gaseous nitriding process because of nitride layer that contains Fe4N, CrN and Fe-αN formed. Hardness layers can achieved value 1051 HV associated with varies thickness from 53 to 119 μm. The presence of a precipitation process occurring in conjunction with nitriding process can lead to a decrease in hardness due to nitrogen content diminishing in solid solution phase. This problem causes weakening of nitrogen expansion in martensite lattice.

Designing an American Sign Language Avatar for Learning Computer Science Concepts for Deaf or Hard-of-Hearing Students and Deaf Interpreters

ERIC Educational Resources Information Center

Andrei, Stefan; Osborne, Lawrence; Smith, Zanthia

2013-01-01

The current learning process of Deaf or Hard of Hearing (D/HH) students taking Science, Technology, Engineering, and Mathematics (STEM) courses needs, in general, a sign interpreter for the translation of English text into American Sign Language (ASL) signs. This method is at best impractical due to the lack of availability of a specialized sign…

Effects of Stress and Task Difficulty on Working Memory and Cortical Networking.

PubMed

Kim, Yujin; Woo, Jihwan; Woo, Minjung

2017-12-01

This study investigated interactive effects of stress and task difficulty on working memory and cortico-cortical communication during memory encoding. Thirty-eight adolescent participants (mean age of 15.7 ± 1.5 years) completed easy and hard working memory tasks under low- and high-stress conditions. We analyzed the accuracy and reaction time (RT) of working memory performance and inter- and intrahemispheric electroencephalogram coherences during memory encoding. Working memory accuracy was higher, and RT shorter, in the easy versus the hard task. RT was shorter under the high-stress (TENS) versus low-stress (no-TENS) condition, while there was no difference in memory accuracy between the two stress conditions. For electroencephalogram coherence, we found higher interhemispheric coherence in all bands but only at frontal electrode sites in the easy versus the hard task. On the other hand, intrahemispheric coherence was higher in the left hemisphere in the easy (versus hard task) and higher in the right hemisphere (with one exception) in the hard (versus easy task). Inter- and intracoherences were higher in the low- versus high-stress condition. Significant interactions between task difficulty and stress condition were observed in coherences of the beta frequency band. The difference in coherence between low- and high-stress conditions was greater in the hard compared with the easy task, with lower coherence under the high-stress condition relative to the low-stress condition. Stress seemed to cause a decrease in cortical network communications between memory-relevant cortical areas as task difficulty increased.

Successful Strategies for Educating Hard-to-Reach Populations: Lessons Learned from Massachusetts' Train-the-Trainer Project Using the "Helping You Take Care of Yourself" Curriculum

ERIC Educational Resources Information Center

Besculides, Melanie; Trebino, Lisa; Nelson, Heather

2012-01-01

Objective: To assess the effectiveness of providing education on breast, cervical and cardiovascular health to hard-to-reach women throughout Massachusetts using an innovative derivation of the "train-the-trainer" approach. Innovation included use of contracts with community-based organizations (CBOs) that required data collection in…

Does adolescent risk taking imply weak executive function? A prospective study of relations between working memory performance, impulsivity, and risk taking in early adolescence.

PubMed

Romer, Daniel; Betancourt, Laura M; Brodsky, Nancy L; Giannetta, Joan M; Yang, Wei; Hurt, Hallam

2011-09-01

Studies of brain development suggest that the increase in risk taking observed during adolescence may be due to insufficient prefrontal executive function compared to a more rapidly developing subcortical motivation system. We examined executive function as assessed by working memory ability in a community sample of youth (n = 387, ages 10 to 12 at baseline) in three annual assessments to determine its relation to two forms of impulsivity (sensation seeking and acting without thinking) and a wide range of risk and externalizing behavior. Using structural equation modeling, we tested a model in which differential activation of the dorsal and ventral striatum produces imbalance in the function of these brain regions. For youth high in sensation seeking, both regions were predicted to develop with age. However, for youth high in the tendency to act without thinking, the ventral striatum was expected to dominate. The model predicted that working memory ability would exhibit (1) early weakness in youth high in acting without thinking but (2) growing strength in those high in sensation seeking. In addition, it predicted that (3) acting without thinking would be more strongly related to risk and externalizing behavior than sensation seeking. Finally, it predicted that (4) controlling for acting without thinking, sensation seeking would predict later increases in risky and externalizing behavior. All four of these predictions were confirmed. The results indicate that the rise in sensation seeking that occurs during adolescence is not accompanied by a deficit in executive function and therefore requires different intervention strategies from those for youth whose impulsivity is characterized by early signs of acting without thinking. © 2011 Blackwell Publishing Ltd.

Hard water softening effect of a baby cleanser

PubMed Central

Walters, Russel M; Anim-Danso, Emmanuel; Amato, Stephanie M; Capone, Kimberly A; Mack, M Catherine; Telofski, Lorena S; Mays, David A

2016-01-01

Background Hard water is associated with atopic dermatitis (eczema). We wanted to determine if a baby cleanser and its individual components altered free ionized calcium (Ca2+) in a simulated hard water baby bath. For these studies, an in vitro determination of free Ca2+ in a simulated hard water baby bath, and an in vivo exploratory study of free Ca2+ absorption into skin from hard water were performed. Methods Free Ca2+ was measured with an ion-sensitive electrode in vitro in hard water (100–500 ppm, Ca2+) before and after addition of the cleanser and/or its components. In an exploratory study, absorption of Ca2+ into skin from hard water was determined in three female participants (aged 21–29 years). Results At an in-use dilution of 1%, the test cleanser reduced free Ca2+ from ~500 ppm to <200 ppm; a 10% in-use dilution bound virtually all free Ca2+. The anionic surfactant component contributed the most to this effect. In the exploratory in vivo study, we measured a reduction of ~15% in free Ca2+ from simulated hard water over 10 minutes. Conclusion Baby cleansers can bind free Ca2+ and reduce the effective water hardness of bath water. Reducing the amount of free Ca2+ in the water will reduce the availability of the ion for binding to the skin. Altering or reducing free Ca2+ concentrations in bath water may be an important parameter in creating the ideal baby bath. PMID:27789967

Modeling Flare Hard X-ray Emission from Electrons in Contracting Magnetic Islands

NASA Astrophysics Data System (ADS)

Guidoni, Silvina E.; Allred, Joel C.; Alaoui, Meriem; Holman, Gordon D.; DeVore, C. Richard; Karpen, Judith T.

2016-05-01

The mechanism that accelerates particles to the energies required to produce the observed impulsive hard X-ray emission in solar flares is not well understood. It is generally accepted that this emission is produced by a non-thermal beam of electrons that collides with the ambient ions as the beam propagates from the top of a flare loop to its footpoints. Most current models that investigate this transport assume an injected beam with an initial energy spectrum inferred from observed hard X-ray spectra, usually a power law with a low-energy cutoff. In our previous work (Guidoni et al. 2016), we proposed an analytical method to estimate particle energy gain in contracting, large-scale, 2.5-dimensional magnetic islands, based on a kinetic model by Drake et al. (2010). We applied this method to sunward-moving islands formed high in the corona during fast reconnection in a simulated eruptive flare. The overarching purpose of the present work is to test this proposed acceleration model by estimating the hard X-ray flux resulting from its predicted accelerated-particle distribution functions. To do so, we have coupled our model to a unified computational framework that simulates the propagation of an injected beam as it deposits energy and momentum along its way (Allred et al. 2015). This framework includes the effects of radiative transfer and return currents, necessary to estimate flare emission that can be compared directly to observations. We will present preliminary results of the coupling between these models.

Potential Health Impacts of Hard Water

PubMed Central

Sengupta, Pallav

2013-01-01

In the past five decades or so evidence has been accumulating about an environmental factor, which appears to be influencing mortality, in particular, cardiovascular mortality, and this is the hardness of the drinking water. In addition, several epidemiological investigations have demonstrated the relation between risk for cardiovascular disease, growth retardation, reproductive failure, and other health problems and hardness of drinking water or its content of magnesium and calcium. In addition, the acidity of the water influences the reabsorption of calcium and magnesium in the renal tubule. Not only, calcium and magnesium, but other constituents also affect different health aspects. Thus, the present review attempts to explore the health effects of hard water and its constituents. PMID:24049611

Potential health impacts of hard water.

PubMed

Sengupta, Pallav

2013-08-01

In the past five decades or so evidence has been accumulating about an environmental factor, which appears to be influencing mortality, in particular, cardiovascular mortality, and this is the hardness of the drinking water. In addition, several epidemiological investigations have demonstrated the relation between risk for cardiovascular disease, growth retardation, reproductive failure, and other health problems and hardness of drinking water or its content of magnesium and calcium. In addition, the acidity of the water influences the reabsorption of calcium and magnesium in the renal tubule. Not only, calcium and magnesium, but other constituents also affect different health aspects. Thus, the present review attempts to explore the health effects of hard water and its constituents.

Hardness and swelling behaviour of epoxidized natural rubber/recycled acrylonitrile-butadiene rubber (ENR 50/NBRr) blends

NASA Astrophysics Data System (ADS)

Ahmad, Hazwani Syaza; Ismail, Hanafi; Rashid, Azura A.

2017-07-01

This recent work is to investigate the hardness and swelling behaviour of epoxidized natural rubber/recycled acrylonitrile-butadiene rubber (ENR 50/NBRr) blends. ENR 50/NBRr blends were prepared by two-roll mills with five different loading of NBRr from 5 to 35 phr. Results indicated that the hardness of ENR 50/NBRr blends increased as recycled NBR increased due to the improvement in crosslink density of the blends. Increasing NBRr content gives ENR 50/NBRr blends better resistance towards swelling. Higher degree of crosslinking will increase the swelling resistance and reduce the penetration of toluene into the blends. The presence of polar group in ENR 50 and NBRr give better hardness properties and swelling behaviour of the ENR 50/NBRr blends compared to the NR/NBRr blends.

The impact of standard and hard-coded parameters on the hydrologic fluxes in the Noah-MP land surface model

NASA Astrophysics Data System (ADS)

Thober, S.; Cuntz, M.; Mai, J.; Samaniego, L. E.; Clark, M. P.; Branch, O.; Wulfmeyer, V.; Attinger, S.

2016-12-01

Land surface models incorporate a large number of processes, described by physical, chemical and empirical equations. The agility of the models to react to different meteorological conditions is artificially constrained by having hard-coded parameters in their equations. Here we searched for hard-coded parameters in the computer code of the land surface model Noah with multiple process options (Noah-MP) to assess the model's agility during parameter estimation. We found 139 hard-coded values in all Noah-MP process options in addition to the 71 standard parameters. We performed a Sobol' global sensitivity analysis to variations of the standard and hard-coded parameters. The sensitivities of the hydrologic output fluxes latent heat and total runoff, their component fluxes, as well as photosynthesis and sensible heat were evaluated at twelve catchments of the Eastern United States with very different hydro-meteorological regimes. Noah-MP's output fluxes are sensitive to two thirds of its standard parameters. The most sensitive parameter is, however, a hard-coded value in the formulation of soil surface resistance for evaporation, which proved to be oversensitive in other land surface models as well. Latent heat and total runoff show very similar sensitivities towards standard and hard-coded parameters. They are sensitive to both soil and plant parameters, which means that model calibrations of hydrologic or land surface models should take both soil and plant parameters into account. Sensible and latent heat exhibit almost the same sensitivities so that calibration or sensitivity analysis can be performed with either of the two. Photosynthesis has almost the same sensitivities as transpiration, which are different from the sensitivities of latent heat. Including photosynthesis and latent heat in model calibration might therefore be beneficial. Surface runoff is sensitive to almost all hard-coded snow parameters. These sensitivities get, however, diminished in total

Hard Copy to Digital Transfer: 3D Models that Match 2D Maps

ERIC Educational Resources Information Center

Kellie, Andrew C.

2011-01-01

This research describes technical drawing techniques applied in a project involving digitizing of existing hard copy subsurface mapping for the preparation of three dimensional graphic and mathematical models. The intent of this research was to identify work flows that would support the project, ensure the accuracy of the digital data obtained,…

[Low risk of reproductive disorders among female greenhouse workers--safe work conditions or health selection for the light work?].

PubMed

Jurewicz, Joanna; Hanke, Wojciech; Makowiec-Dabrowska, Teresa

2008-01-01

There are two major potential hazards typical of work in greenhouses: hard physical work or exposure to pesticides. The aim of the study was to investigate whether the work in greenhouse during pregnancy have an adverse effect on its outcome (preterm delivery, spontaneous abortion and birth defects). The study was performed in a group of 460 women employed in 14 greenhouses involved in growing vegetables and flowers. The rate of spontaneous abortions was much elbeit insignificantly higher in the women working in greenhouses during pregnancy than in those employed out of them; that applied mostly to the women performing light jobs in greenhouses. An increased risk of preterm delivery and spontaneous abortion was also observed in women performing greenhouse light jobs. No significantly increased risk of birth defects was observed in children born to women working in greenhouses. Neither was there any relationship between exposure to RD or ED pesticides exposure--and the occurrence of preterm delivery, spontaneous abortion and birth defects. No higher risk of pathological pregnancy that could be associated with hard physical work and pesticide exposure was observed. This may result from the fact that women themselves select an appropriate kind of job during pregnancy and a possible removal of women with pathological pregnancy from jobs involving pesticide exposure, as well as from the promotion of biological protection. The greenhouse workers should be aware of the two typical hazards found in greenhouses (hard work and exposure to pesticides) and their potential negative effects on the reproduction. The results of this study warrant the need for further study of the effect of pesticide exposure and work load on the pregnancy outcome.

Calibration of hard x-ray (15 - 50 keV) optics at the MPE test facility PANTER

NASA Astrophysics Data System (ADS)

Bräuninger, Heinrich; Burkert, Wolfgang; Hartner, Gisela D.; Citterio, Oberto; Ghigo, Mauro; Mazzoleni, Francesco; Pareschi, Giovanni; Spiga, Daniele

2004-02-01

The Max-Planck-Institut für extraterrestrische Physik (MPE) in Garching, Germany, operates the large X-ray beam line facility PANTER for testing astronomical systems. At PANTER a number of telescopes like EXOSAT, ROSAT, SAX, JET-X, ABRIXAS, XMM and SWIFT operating in the soft energy range (0.02 - 15 keV) have been successfully calibrated. In the present paper we report on an important upgrade recently implemented that enables the calibration of hard X-ray optics (from 15 up to 50 keV). Currently hard X-ray optics based on single and multilayer coating are being developed for several future X-ray missions. The hard X-ray calibrations at PANTER are carried out by a high energy source based on an electron gun and several anodes, able to cover the energy range from 4.5 up to 50 keV. It provides fluxes up to 104 counts/sec/cm2 at the instrument chamber with a stability better than 1%. As detector a pn-CCD camera operating between 0.2 and 50 keV and a collecting area of 36 cm2 is used. Taking into account the high energy resolution of the CCD (145 eV at 6 keV), a very easy way to operate the facility in hard X-ray is in energy-dispersive mode (i.e. with a broad-band beam). A double crystal monochromator is also available providing energies up to 20 keV. In this paper we present the first results obtained by using PANTER for hard X-ray characterizations, performed on prototype multilayer optics developed by the Osservatorio Astronomico di Brera (OAB), Milano, Italy, and the Harvard-Smithsonian Center for Astrophysics (CfA), Cambridge, MA, USA.

Polymer-Based Nanocomposites: An Internship Program for Deaf and Hard of Hearing Students

NASA Astrophysics Data System (ADS)

Cebe, Peggy; Cherdack, Daniel; Seyhan Ince-Gunduz, B.; Guertin, Robert; Haas, Terry; Valluzzi, Regina

2007-03-01

We report on our summer internship program in Polymer-Based Nanocomposites, for deaf and hard of hearing undergraduates who engage in classroom and laboratory research work in polymer physics. The unique attributes of this program are its emphasis on: 1. Teamwork; 2. Performance of a start-to-finish research project; 3. Physics of materials approach; and 4. Diversity. Students of all disability levels have participated in this program, including students who neither hear nor voice. The classroom and laboratory components address the materials chemistry and physics of polymer-based nanocomposites, crystallization and melting of polymers, the interaction of X-rays and light with polymers, mechanical properties of polymers, and the connection between thermal processing, structure, and ultimate properties of polymers. A set of Best Practices is developed for accommodating deaf and hard of hearing students into the laboratory setting. The goal is to bring deaf and hard of hearing students into the larger scientific community as professionals, by providing positive scientific experiences at a formative time in their educational lives.

Novel hard compositions and methods of preparation

DOEpatents

Sheinberg, Haskell

1983-08-23

Novel very hard compositions of matter are prepared by using in all embodiments only a minor amount of a particular carbide (or materials which can form the carbide in situ when subjected to heat and pressure); and no strategic cobalt is needed. Under a particular range of conditions, densified compositions of matter of the invention are prepared having hardnesses on the Rockwell A test substantially equal to the hardness of pure tungsten carbide and to two of the hardest commercial cobalt-bonded tungsten carbides. Alternately, other compositions of the invention which have slightly lower hardnesses than those described above in one embodiment also possess the advantage of requiring no tungsten and in another embodiment possess the advantage of having a good fracture toughness value. Photomicrographs show that the shapes of the grains of the alloy mixture with which the minor amount of carbide (or carbide-formers) is mixed are radically altered from large, rounded to small, very angular by the addition of the carbide. Superiority of one of these hard compositions of matter over cobalt-bonded tungsten carbide for ultra-high pressure anvil applications was demonstrated.

Novel hard compositions and methods of preparation

DOEpatents

Sheinberg, H.

1983-08-23

Novel very hard compositions of matter are prepared by using in all embodiments only a minor amount of a particular carbide (or materials which can form the carbide in situ when subjected to heat and pressure); and no strategic cobalt is needed. Under a particular range of conditions, densified compositions of matter of the invention are prepared having hardnesses on the Rockwell A test substantially equal to the hardness of pure tungsten carbide and to two of the hardest commercial cobalt-bonded tungsten carbides. Alternately, other compositions of the invention which have slightly lower hardnesses than those described above in one embodiment also possess the advantage of requiring no tungsten and in another embodiment possess the advantage of having a good fracture toughness value. Photomicrographs show that the shapes of the grains of the alloy mixture with which the minor amount of carbide (or carbide-formers) is mixed are radically altered from large, rounded to small, very angular by the addition of the carbide. Superiority of one of these hard compositions of matter over cobalt-bonded tungsten carbide for ultra-high pressure anvil applications was demonstrated. 3 figs.

Haptic Search for Hard and Soft Spheres

PubMed Central

van Polanen, Vonne; Bergmann Tiest, Wouter M.; Kappers, Astrid M. L.

2012-01-01

In this study the saliency of hardness and softness were investigated in an active haptic search task. Two experiments were performed to explore these properties in different contexts. In Experiment 1, blindfolded participants had to grasp a bundle of spheres and determine the presence of a hard target among soft distractors or vice versa. If the difference in compliance between target and distractors was small, reaction times increased with the number of items for both features; a serial strategy was found to be used. When the difference in compliance was large, the reaction times were independent of the number of items, indicating a parallel strategy. In Experiment 2, blindfolded participants pressed their hand on a display filled with hard and soft items. In the search for a soft target, increasing reaction times with the number of items were found, but the location of target and distractors appeared to have a large influence on the search difficulty. In the search for a hard target, reaction times did not depend on the number of items. In sum, this showed that both hardness and softness are salient features. PMID:23056197

Haptic search for hard and soft spheres.

PubMed

van Polanen, Vonne; Bergmann Tiest, Wouter M; Kappers, Astrid M L

2012-01-01

In this study the saliency of hardness and softness were investigated in an active haptic search task. Two experiments were performed to explore these properties in different contexts. In Experiment 1, blindfolded participants had to grasp a bundle of spheres and determine the presence of a hard target among soft distractors or vice versa. If the difference in compliance between target and distractors was small, reaction times increased with the number of items for both features; a serial strategy was found to be used. When the difference in compliance was large, the reaction times were independent of the number of items, indicating a parallel strategy. In Experiment 2, blindfolded participants pressed their hand on a display filled with hard and soft items. In the search for a soft target, increasing reaction times with the number of items were found, but the location of target and distractors appeared to have a large influence on the search difficulty. In the search for a hard target, reaction times did not depend on the number of items. In sum, this showed that both hardness and softness are salient features.

Local chemical potential, local hardness, and dual descriptors in temperature dependent chemical reactivity theory.

PubMed

Franco-Pérez, Marco; Ayers, Paul W; Gázquez, José L; Vela, Alberto

2017-05-31

In this work we establish a new temperature dependent procedure within the grand canonical ensemble, to avoid the Dirac delta function exhibited by some of the second order chemical reactivity descriptors based on density functional theory, at a temperature of 0 K. Through the definition of a local chemical potential designed to integrate to the global temperature dependent electronic chemical potential, the local chemical hardness is expressed in terms of the derivative of this local chemical potential with respect to the average number of electrons. For the three-ground-states ensemble model, this local hardness contains a term that is equal to the one intuitively proposed by Meneses, Tiznado, Contreras and Fuentealba, which integrates to the global hardness given by the difference in the first ionization potential, I, and the electron affinity, A, at any temperature. However, in the present approach one finds an additional temperature-dependent term that introduces changes at the local level and integrates to zero. Additionally, a τ-hard dual descriptor and a τ-soft dual descriptor given in terms of the product of the global hardness and the global softness multiplied by the dual descriptor, respectively, are derived. Since all these reactivity indices are given by expressions composed of terms that correspond to products of the global properties multiplied by the electrophilic or nucleophilic Fukui functions, they may be useful for studying and comparing equivalent sites in different chemical environments.

The ABC's of a Good Work Ethic

ERIC Educational Resources Information Center

Berry, R. Ladson; Glenn, Robert E.

2004-01-01

The work ethic incorporates more than just a single concept of high effort. It includes qualities like commitment, dependability, and willingness to learn. The work ethic also is closely associated with other values such as honesty, patience, and generosity. In this article, the authors emphasize the importance of hard work as well as the…

Synthesis, Structure, and Properties of Refractory Hard-Metal Borides

NASA Astrophysics Data System (ADS)

Lech, Andrew Thomas

As the limits of what can be achieved with conventional hard compounds, such as tungsten carbide, are nearing reach, super-hard materials are an area of increasing industrial interest. The refractory hard metal borides, such as ReB2 and WB4, offer an increasingly attractive alternative to diamond and cubic boron nitride as a next-generation tool material. In this Thesis, a thorough discussion is made of the progress achieved by our laboratory towards understanding the synthesis, structure, and properties of these extremely hard compounds. Particular emphasis is placed on structural manipulation, solid solution formation, and the unique crystallographic manifestations of what might also be called "super-hard metals".

KENNEDY SPACE CENTER, FLA. - Former astronaut Story Musgrave talks to employees and their children during a welcome ceremony in the IMAX Theatre, KSC Visitor Complex. Employees were invited to share their work experience with their children for Take Our Children to Work Day.

NASA Image and Video Library

2003-07-24

KENNEDY SPACE CENTER, FLA. - Former astronaut Story Musgrave talks to employees and their children during a welcome ceremony in the IMAX Theatre, KSC Visitor Complex. Employees were invited to share their work experience with their children for Take Our Children to Work Day.

Hard template synthesis of metal nanowires

NASA Astrophysics Data System (ADS)

Kawamura, Go; Muto, Hiroyuki; Matsuda, Atsunori

2014-11-01

Metal nanowires (NWs) have attracted much attention because of their high electron conductivity, optical transmittance and tunable magnetic properties. Metal NWs have been synthesized using soft templates such as surface stabilizing molecules and polymers, and hard templates such as anodic aluminum oxide, mesoporous oxide, carbon nanotubes. NWs prepared from hard templates are composites of metals and the oxide/carbon matrix. Thus, selecting appropriate elements can simplify the production of composite devices. The resulting NWs are immobilized and spatially arranged, as dictated by the ordered porous structure of the template. This avoids the NWs from aggregating, which is common for NWs prepared with soft templates in solution. Herein, the hard template synthesis of metal NWs is reviewed, and the resulting structures, properties and potential applications are discussed.

Hard template synthesis of metal nanowires.

PubMed

Kawamura, Go; Muto, Hiroyuki; Matsuda, Atsunori

2014-01-01

Metal nanowires (NWs) have attracted much attention because of their high electron conductivity, optical transmittance, and tunable magnetic properties. Metal NWs have been synthesized using soft templates such as surface stabilizing molecules and polymers, and hard templates such as anodic aluminum oxide, mesoporous oxide, carbon nanotubes. NWs prepared from hard templates are composites of metals and the oxide/carbon matrix. Thus, selecting appropriate elements can simplify the production of composite devices. The resulting NWs are immobilized and spatially arranged, as dictated by the ordered porous structure of the template. This avoids the NWs from aggregating, which is common for NWs prepared with soft templates in solution. Herein, the hard template synthesis of metal NWs is reviewed, and the resulting structures, properties and potential applications are discussed.

Digital Note-Taking: Discussion of Evidence and Best Practices.

PubMed

Grahame, Jason A

2016-03-01

Balancing active course engagement and comprehension with producing quality lecture notes is challenging. Although evidence suggests that handwritten note-taking may improve comprehension and learning outcomes, many students still self-report a preference for digital note-taking and a belief that it is beneficial. Future research is warranted to determine the effects on performance of digitally writing notes. Independent of the methods or software chosen, best practices should be provided to students with information to help them consciously make an educated decision based on the evidence and their personal preference. Optimal note-taking requires self-discipline, focused attention, sufficient working memory, thoughtful rewording, and decreased distractions. Familiarity with the tools and mediums they choose will help students maximize working memory, produce better notes, and aid in their retention of material presented.

Hard X-ray Imaging for Measuring Laser Absorption Spatial Profiles on the National Ignition Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dewald, E L; Jones, O S; Landen, O L

2006-04-25

Hard x-ray (''Thin wall'') imaging will be employed on the National Ignition Facility (NIF) to spatially locate laser beam energy deposition regions on the hohlraum walls in indirect drive Inertial Confinement Fusion (ICF) experiments, relevant for ICF symmetry tuning. Based on time resolved imaging of the hard x-ray emission of the laser spots, this method will be used to infer hohlraum wall motion due to x-ray and laser ablation and any beam refraction caused by plasma density gradients. In optimizing this measurement, issues that have to be addressed are hard x-ray visibility during the entire ignition laser pulse with intensitiesmore » ranging from 10{sup 13} to 10{sup 15} W/cm{sup 2}, as well as simultaneous visibility of the inner and the outer laser drive cones. In this work we will compare the hard x-ray emission calculated by LASNEX and analytical modeling with thin wall imaging data recorded previously on Omega and during the first hohlraum experiments on NIF. Based on these calculations and comparisons the thin wall imaging will be optimized for ICF/NIF experiments.« less

Room Temperature Hard Radiation Detectors Based on Solid State Compound Semiconductors: An Overview

NASA Astrophysics Data System (ADS)

Mirzaei, Ali; Huh, Jeung-Soo; Kim, Sang Sub; Kim, Hyoun Woo

2018-05-01

Si and Ge single crystals are the most common semiconductor radiation detectors. However, they need to work at cryogenic temperatures to decrease their noise levels. In contrast, compound semiconductors can be operated at room temperature due to their ability to grow compound materials with tunable densities, band gaps and atomic numbers. Highly efficient room temperature hard radiation detectors can be utilized in biomedical diagnostics, nuclear safety and homeland security applications. In this review, we discuss room temperature compound semiconductors. Since the field of radiation detection is broad and a discussion of all compound materials for radiation sensing is impossible, we discuss the most important materials for the detection of hard radiation with a focus on binary heavy metal semiconductors and ternary and quaternary chalcogenide compounds.

Structure changes in steels and hard metal induced by nanosecond and femtosecond laser processing

NASA Astrophysics Data System (ADS)

Dumitru, Gabriel; Romano, Valerio; Weber, Heinz P.; Haefke, Henry; Gerbig, Yvonne; Sentis, Marc L.; Hermann, Joerg; Bruneau, Sebastien

2003-11-01

Investigations on the occurrence of structure and hardness changes (for two sorts of steel and for a hard metal substrate) in the immediate vicinity of laser induced craters are presented in this work. Experiments with femtosecond pulses were performed in air with a Ti:sapphire laser (800 nm, 100 fs) at mean fluences of 2, 5 and 10 J/cm2. Series of microcraters were induced with 100 to 5,000 laser pulses per hole. Experiments with similar fluences, but 10 to 40 pules per hole, were performed on the same materials using a Nd:YAG delivering 100 ns pulese. After laser irradiation, cuts were made through the processed samples and the changes occurred in the crystalline structure of the target materials were evidenced by metallographical analysis of the resulting cross-sections. Hardness measurements were performed in points situated in the immediate vicinity of the laser-induced pores. Affected zones in the material surrounding laser induced pores were always found in the ns-regime, however with different properties for various laser parameters. In the fs-regime, zones of modified materials were also found and in such zones a significant hardness increasing was evidenced; the limit of the low fluences regime, where no structure changes occurred, was found to be slightly above 2 J/cm2.

Impact of chronic lymphatic filariasis on quantity and quality of productive work among weavers in an endemic village from India.

PubMed

Babu, B V; Swain, B K; Rath, K

2006-05-01

To assess the impact of hydrocele and lymphoedema on the quantity and quality of productive work of weavers. Case-control study in an endemic village in Andhra Pradesh, India. We collected qualitative data on work activities from cases and age- and sex-matched controls through informal discussions and observation. The mean (+/-standard deviation) daily work time of cases was 7.38 h (+/-2.47), significantly less than that of controls (8.17+/-2.41 h). Lost work time was equivalent to around 29 days of work in a year. Gender had significant influence on the mean number of working hours in this occupational group. Most cases could not weave, which is physically demanding, and preferred less strenuous tasks such as spinning, starching, dyeing or sizing. Hard physical labour constitutes 71.5% of total work time among patients and 83.7% in controls. As income also depends on the type of work, cases earn less. Filariasis has an adverse impact on the productivity of weavers, and morbidity management strategies and control programmes need to take this into account.

A Novel Approach to Hardness Testing

NASA Technical Reports Server (NTRS)

Spiegel, F. Xavier; West, Harvey A.

1996-01-01

This paper gives a description of the application of a simple rebound time measuring device and relates the determination of relative hardness of a variety of common engineering metals. A relation between rebound time and hardness will be sought. The effect of geometry and surface condition will also be discussed in order to acquaint the student with the problems associated with this type of method.

Hard particle effect on surface generation in nano-cutting

NASA Astrophysics Data System (ADS)

Xu, Feifei; Fang, Fengzhou; Zhang, Xiaodong

2017-12-01

The influence of the hard particle on the surface generation, plastic deformation and processing forces in nano-cutting of aluminum is investigated by means of molecular dynamics simulations. In this investigation, a hard particle which is simplified as a diamond ball is embedded under the free surface of workpiece with different depths. The influence of the position of the hard ball on the surface generation and other material removal mechanism, such as the movement of the ball under the action of cutting tool edge, is revealed. The results show that when the hard particle is removed, only a small shallow pit is left on the machined surface. Otherwise, it is pressed down to the subsurface of the workpiece left larger and deeper pit on the generated surface. Besides that, the hard particle in the workpiece would increase the processing force when the cutting tool edge or the plastic carriers interact with the hard particle. It is helpful to optimize the cutting parameters and material properties for obtaining better surface quality in nano-cutting of composites or other materials with micro/nanoscale hard particles in it.

Resource Recovery of Flooded Underground Mine Workings

EPA Science Inventory

Butte, Montana has been the site of hard rock mining activities for over a century. Over 400 hundred underground mines were developed and over 10,000 miles of underground mine workings were created. During active mining, groundwater was removed from the workings by large-scale pu...

Controlling coherence using the internal structure of hard pi pulses.

PubMed

Dong, Yanqun; Ramos, R G; Li, Dale; Barrett, S E

2008-06-20

The tiny difference between hard pi pulses and their delta-function approximation can be exploited to control coherence. Variants on the magic echo that work despite a large spread in resonance offsets are demonstrated using the zeroth- and first-order average Hamiltonian terms, for 13C NMR in 60C. The 29Si NMR linewidth of silicon has been reduced by a factor of about 70,00 using this approach, which also has potential applications in magnetic resonance microscopy and imaging of solids.

A mean spherical model for soft potentials: The hard core revealed as a perturbation

NASA Technical Reports Server (NTRS)

Rosenfeld, Y.; Ashcroft, N. W.

1978-01-01

The mean spherical approximation for fluids is extended to treat the case of dense systems interacting via soft-potentials. The extension takes the form of a generalized statement concerning the behavior of the direct correlation function c(r) and radial distribution g(r). From a detailed analysis that views the hard core portion of a potential as a perturbation on the whole, a specific model is proposed which possesses analytic solutions for both Coulomb and Yukawa potentials, in addition to certain other remarkable properties. A variational principle for the model leads to a relatively simple method for obtaining numerical solutions.

Job Satisfaction of Teachers of Students Who Are Deaf or Hard of Hearing

ERIC Educational Resources Information Center

Luckner, John L.; Dorn, Brittany

2017-01-01

The pressure that educators are experiencing to educate more students, with more challenges, to higher levels of learning than any time in the past is significantly changing their working conditions. The purpose of this study was to examine the perceptions of a national sample of teachers of students who are deaf or hard of hearing to ascertain…

THE HOT HARDNESS OF TITANIUM AND TITANIUM ALLOYS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larson, F.R.

1958-07-01

The hot hardness of 27 different heats of titanium and titunium alloys was studied. Tests were conducted on a modified Rockwell machine in an argon atmosphere. Results indicate that low alloy heats lose their hardnesses at a fairly high even rate. On thc other hand, high alloy heats hold their hardnesses well up to about 1100 d F, and then the hardness drops off very sharply with increasing temperature. The influence of alloying elements in promoting resistance to softening was evaluated at 900 d F. Iron was found to be the most effective with the other elements being arranged inmore » order of decreasing effect, as follows: manganese, (auth)« less

Hard QCD rescattering in few nucleon systems

NASA Astrophysics Data System (ADS)

Maheswari, Dhiraj; Sargsian, Misak

2017-01-01

The theoretical framework of hard QCD rescattering mechanism (HRM) is extended to calculate the high energy γ3 He -> pd reaction at 900 center of mass angle. In HRM model , the incoming high energy photon strikes a quark from one of the nucleons in the target which subsequently undergoes hard rescattering with the quarks from the other nucleons generating hard two-body baryonic system in the final state of the reaction. Based on the HRM, a parameter free expression for the differential cross section for the reaction is derived, expressed through the 3 He -> pd transition spectral function, hard pd -> pd elastic scattering cross section and the effective charge of the quarks being interchanged in the hard rescattering process. The numerical estimates obtained from this expression for the differential cross section are in a good agreement with the data recently obtained at the Jefferson Lab experiment, showing the energy scaling of cross section with an exponent of s-17, also consistent with the quark counting rule. The angular and energy dependences of the cross section are also predicted within HRM which are in good agreement with the preliminary data of these distributions. Research is supported by the US Department of Energy.

Hard template synthesis of metal nanowires

PubMed Central

Kawamura, Go; Muto, Hiroyuki; Matsuda, Atsunori

2014-01-01

Metal nanowires (NWs) have attracted much attention because of their high electron conductivity, optical transmittance, and tunable magnetic properties. Metal NWs have been synthesized using soft templates such as surface stabilizing molecules and polymers, and hard templates such as anodic aluminum oxide, mesoporous oxide, carbon nanotubes. NWs prepared from hard templates are composites of metals and the oxide/carbon matrix. Thus, selecting appropriate elements can simplify the production of composite devices. The resulting NWs are immobilized and spatially arranged, as dictated by the ordered porous structure of the template. This avoids the NWs from aggregating, which is common for NWs prepared with soft templates in solution. Herein, the hard template synthesis of metal NWs is reviewed, and the resulting structures, properties and potential applications are discussed. PMID:25453031

The School/Work Nexus: Transition of Youth from School to Work.

ERIC Educational Resources Information Center

Ginzberg, Eli

This monograph by educator-philosopher Eli Ginzberg, commisioned by the Phi Delta Kappa Educational Foundation, examines the transition from school to work, exploring why the transition is so hard for some groups of young people, relatively easy for others. The point of the book is not to add one more research report to the literature dealing with…

Influence of Cobalt on the Adhesion Strength of Polycrystalline Diamond Coatings on WC-Co Hard Alloys

NASA Astrophysics Data System (ADS)

Linnik, S. A.; Gaidaichuk, A. V.; Okhotnikov, V. V.

2018-02-01

The influence of cobalt on the phase composition and adhesion strength of polycrystalline diamond coatings has been studied using scanning electron microscopy, Raman spectroscopy, and X-ray microanalysis. The coatings have been deposited on WC-Co hard alloy substrates in glow discharge plasma. It has been found that the catalytic amorphization of carbon only takes place during the direct synthesis of the diamond coating, when the cobalt vapor pressure over the substrate is high and the cobalt-related degradation of the synthesized diamond is absent.

An asymptotically consistent approximant method with application to soft- and hard-sphere fluids.

PubMed

Barlow, N S; Schultz, A J; Weinstein, S J; Kofke, D A

2012-11-28

A modified Padé approximant is used to construct an equation of state, which has the same large-density asymptotic behavior as the model fluid being described, while still retaining the low-density behavior of the virial equation of state (virial series). Within this framework, all sequences of rational functions that are analytic in the physical domain converge to the correct behavior at the same rate, eliminating the ambiguity of choosing the correct form of Padé approximant. The method is applied to fluids composed of "soft" spherical particles with separation distance r interacting through an inverse-power pair potential, φ = ε(σ∕r)(n), where ε and σ are model parameters and n is the "hardness" of the spheres. For n < 9, the approximants provide a significant improvement over the 8-term virial series, when compared against molecular simulation data. For n ≥ 9, both the approximants and the 8-term virial series give an accurate description of the fluid behavior, when compared with simulation data. When taking the limit as n → ∞, an equation of state for hard spheres is obtained, which is closer to simulation data than the 10-term virial series for hard spheres, and is comparable in accuracy to other recently proposed equations of state. By applying a least square fit to the approximants, we obtain a general and accurate soft-sphere equation of state as a function of n, valid over the full range of density in the fluid phase.

Study of surface integrity AISI 4140 as result of hard, dry and high speed machining using CBN

NASA Astrophysics Data System (ADS)

Ginting, B.; Sembiring, R. W.; Manurung, N.

2017-09-01

The concept of hard, dry and high speed machining can be combined, to produce high productivity, with lower production costs in manufacturing industry. Hard lathe process can be a solution to reduce production time. In lathe hard alloy steels reported problems relating to the integrity of such surface roughness, residual stress, the white layer and the surface integrity. AISI 4140 material is used for high reliable hydraulic system components. This material includes in cold work tool steel. Consideration election is because this material is able to be hardened up to 55 HRC. In this research, the experimental design using CCD model fit with three factors, each factor is composed of two levels, and six central point, experiments were conducted with 1 replications. The experimental design research using CCD model fit.

Note taking, review, memory, and comprehension.

PubMed

Bohay, Mark; Blakely, Daniel P; Tamplin, Andrea K; Radvansky, Gabriel A

2011-01-01

In previous work assessing memory at various levels of representation, namely the surface form, textbase, and situation model levels, participants read texts but were otherwise not actively engaged with the texts. The current study tested the influence of active engagement with the material via note taking, along with the opportunity to review such notes, and the modality of presentation (text vs. spoken). The influence of these manipulations was assessed both immediately and 1 week later. In Experiment 1 participants read a text, whereas in Experiment 2 participants watched a video recording of the material being read as a lecture. For each experiment the opportunity to take notes was manipulated within participants, and the opportunity to review these notes before the test was manipulated between participants. Note taking improved performance at the situation model level in both experiments, although there was also some suggestion of benefit for the surface form. Thus, active engagement with material, such as note taking, appears to have the greatest benefit at the deeper levels of understanding.

Taking Root: Texas' Lessons for Sustaining the College- and Career-Ready Agenda

ERIC Educational Resources Information Center

Achieve, Inc., 2009

2009-01-01

To give states the information they need to sustain hard-fought education reform policy changes effectively, Achieve conducted research on state education reforms that have been sustained successfully for over a decade or more. Funded by the GE Foundation, Achieve hopes this work will help other state leaders, wherever they may be on their road to…

Taking Root: Massachusetts' Lessons for Sustaining the College- and Career-Ready Agenda

ERIC Educational Resources Information Center

Achieve, Inc., 2009

2009-01-01

To give states the information they need to sustain hard-fought education reform effectively, Achieve conducted research on state education reforms that have been sustained successfully for over a decade or more. Funded by the GE Foundation, Achieve hopes this work will help other state leaders, wherever they may be on their road to reform,…

Taking Root: Indiana's Lessons for Sustaining the College- and Career-Ready Agenda

ERIC Educational Resources Information Center

Achieve, Inc., 2009

2009-01-01

To give states the information they need to sustain hard-fought education reform effectively, Achieve conducted research on state education reforms that have been sustained successfully for over a decade or more. Funded by the GE Foundation, Achieve hopes this work will help other state leaders, wherever they may be on their road to reform,…

Accommodations quality for students who are d/Deaf or hard of hearing.

PubMed

Cawthon, Stephanie W; Leppo, Rachel

2013-01-01

Students who are d/Deaf or hard of hearing often receive accommodations that are intended to increase access to the educational environment. The authors provide the results of a large national study of accommodations use in secondary and postsecondary settings. The article focuses on three aspects of accommodations use: access, quality, and consistency. The participants were 1,350 professionals working with a diverse group of students who were d/Deaf or hard of hearing in a variety of roles, including educators, administrators, interpreters, vocational rehabilitation agency staff, and allied service providers. Data were collected from both a national survey and a series of focus groups conducted over a 1-year period. The authors discuss the results in light of the crucial nature of accommodations during the transition into a variety of educational, training, and employment options.

Comparison of Hard Surface and Soft Soil Impact Performance of a Crashworthy Composite Fuselage Concept

NASA Technical Reports Server (NTRS)

Sareen, Ashish K.; Sparks, Chad; Mullins, B. R., Jr.; Fasanella, Edwin; Jackson, Karen

2002-01-01

A comparison of the soft soil and hard surface impact performance of a crashworthy composite fuselage concept has been performed. Specifically, comparisons of the peak acceleration values, pulse duration, and onset rate at specific locations on the fuselage were evaluated. In a prior research program, the composite fuselage section was impacted at 25 feet per second onto concrete at the Impact Dynamics Research Facility (IDRF) at NASA Langley Research Center. A soft soil test was conducted at the same impact velocity as a part of the NRTC/RITA Crashworthy and Energy Absorbing Structures project. In addition to comparisons of soft soil and hard surface test results, an MSC. Dytran dynamic finite element model was developed to evaluate the test analysis correlation. In addition, modeling parameters and techniques affecting test analysis correlation are discussed. Once correlated, the analytical methodology will be used in follow-on work to evaluate the specific energy absorption of various subfloor concepts for improved crash protection during hard surface and soft soil impacts.

An Extended Hardness Limit in Bulk Nanoceramics

DTIC Science & Technology

2014-01-01

spinel as an archetypal hard ceramic, the hardness of this transparent ceramic armor is shown to rigorously follow the Hall–Petch relationship down...as a result of complex phenomena related to an unconven- tionally high ratio of atoms on interfaces, or grain bound- aries, to atoms in the grain

Career and Workplace Experiences of Australian University Graduates Who Are Deaf or Hard of Hearing

ERIC Educational Resources Information Center

Punch, Renee; Hyde, Merv; Power, Des

2007-01-01

This article reports on the experiences of a group of deaf and hard-of-hearing alumni of Griffith University in south-east Queensland, Australia. Participants completed a survey answering questions about their communication patterns and preferences, working lives, career barriers or difficulties anticipated and encountered, and workplace…

Mucocele of the hard palate in children.

PubMed

Abdel-Aziz, Mosaad; Khalifa, Badawy; Nassar, Ahmed; Kamel, Ahmed; Naguib, Nader; El-Tahan, Abdel-Rahman

2016-06-01

Mucus retention cyst of the hard palate may result from obstruction of the ducts of the minor salivary glands, and it was defined as a mucocele. Although, the disease is not common in the hard palate, it was previously reported by many authors in the soft palate. The aim of our study was to present pediatric patients who were diagnosed to have mucocele of the hard palate, and to evaluate the outcome of the surgical excision of this lesion. This is a case series study included 8 pediatric patients who presented with cystic lesions on the hard palate which were removed surgically, and were diagnosed as mucoceles. Preoperative data, surgical procedures, and postoperative outcome were presented. Follow up of patients was performed for at least one year. The swelling was detected as a single isolated lesion, on the side of the hard palate, covered with healthy mucosa, not tender, oval or round in shape, and measuring 0.4 to 1.7cm in its greatest dimension. Computed tomography showed a well defined cavity which was not invading the bone, and not disrupting the muscles of the palate. Histopathological examination confirmed that the lesion was a cavity that is lined with an epithelial layer with pseudoepitheliomatous hyperplasia. No patients developed intraoperative or postoperative complications, and no recurrence was detected in any patient. Oral mucoceles can develop on the hard palate of the children, the lesions are mucus retention cysts. Complete surgical removal of the lesions with their cystic wall is a good treatment options, it carries no risk of recurrence. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Numerical simulations of the hard X-ray pulse intensity distribution at the Linac Coherent Light Source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pardini, Tom; Aquila, Andrew; Boutet, Sebastien

Numerical simulations of the current and future pulse intensity distributions at selected locations along the Far Experimental Hall, the hard X-ray section of the Linac Coherent Light Source (LCLS), are provided. Estimates are given for the pulse fluence, energy and size in and out of focus, taking into account effects due to the experimentally measured divergence of the X-ray beam, and measured figure errors of all X-ray optics in the beam path. Out-of-focus results are validated by comparison with experimental data. Previous work is expanded on, providing quantitatively correct predictions of the pulse intensity distribution. Numerical estimates in focus aremore » particularly important given that the latter cannot be measured with direct imaging techniques due to detector damage. Finally, novel numerical estimates of improvements to the pulse intensity distribution expected as part of the on-going upgrade of the LCLS X-ray transport system are provided. As a result, we suggest how the new generation of X-ray optics to be installed would outperform the old one, satisfying the tight requirements imposed by X-ray free-electron laser facilities.« less

Numerical simulations of the hard X-ray pulse intensity distribution at the Linac Coherent Light Source

DOE PAGES

Pardini, Tom; Aquila, Andrew; Boutet, Sebastien; ...

2017-06-15

Numerical simulations of the current and future pulse intensity distributions at selected locations along the Far Experimental Hall, the hard X-ray section of the Linac Coherent Light Source (LCLS), are provided. Estimates are given for the pulse fluence, energy and size in and out of focus, taking into account effects due to the experimentally measured divergence of the X-ray beam, and measured figure errors of all X-ray optics in the beam path. Out-of-focus results are validated by comparison with experimental data. Previous work is expanded on, providing quantitatively correct predictions of the pulse intensity distribution. Numerical estimates in focus aremore » particularly important given that the latter cannot be measured with direct imaging techniques due to detector damage. Finally, novel numerical estimates of improvements to the pulse intensity distribution expected as part of the on-going upgrade of the LCLS X-ray transport system are provided. As a result, we suggest how the new generation of X-ray optics to be installed would outperform the old one, satisfying the tight requirements imposed by X-ray free-electron laser facilities.« less

Does Work Experience Actually Work?

ERIC Educational Resources Information Center

Field, John

2012-01-01

As unemployment levels rise, so education and training move into the policy spotlight. For the government, this is a very uncomfortable place to be right now. A number of large companies have withdrawn from the flagship Work Programme--under which jobseekers are invited to take up unpaid work placements of between two and eight weeks--amid…

21 CFR 133.148 - Hard grating cheeses.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Hard grating cheeses. 133.148 Section 133.148 Food... HUMAN CONSUMPTION CHEESES AND RELATED CHEESE PRODUCTS Requirements for Specific Standardized Cheese and Related Products § 133.148 Hard grating cheeses. (a) The cheeses for which definitions and standards of...

Hard Spring Wheat Technical Committee 2016 Crop

USDA-ARS?s Scientific Manuscript database

Seven experimental lines of hard spring wheat were grown at up to five locations in 2016 and evaluated for kernel, milling, and bread baking quality against the check variety Glenn. Wheat samples were submitted through the Wheat Quality Council and processed and milled at the USDA-ARS Hard Red Spri...

Hardness of enamel exposed to Coca-Cola and artificial saliva.

PubMed

Devlin, H; Bassiouny, M A; Boston, D

2006-01-01

The purpose of this study was to determine the rate of change in indentation hardness of enamel in permanent teeth exposed to Coca-Cola. In a further experiment, the ability of a commercially available artificial saliva to remineralize enamel treated with Coca-Cola was tested. Ten enamel specimens were randomly chosen to be treated with Coca-Cola (experimental groups) and seven with water (control group). The fluids were applied for 1, 2, 3 h and overnight (15 h), washed off with a few drops of water and the moist enamel indentation hardness tested after each interval. With Coca-Cola treatment, the mean enamel hardness was 92.6% (s.d. = 7.9) of the original baseline hardness after 1 h, 93.25% (s.d. = 10.15) after 2 h, 85.7% (s.d. = 12.03) after 3 h and 80.3% after 15 h. The mean indentation hardness of control specimens treated with water was 108.7% (s.d. = 16.09) of the original hardness after 1 h, 99.09% (s.d. = 18.98) after 2 h, 98.97% (s.d. =11.24) after 3 h and 98.42% (s.d. = 22.78) after 15 h. In a separate experiment, the hardness of 9 enamel specimens was tested, as previously described, before and after treatment with Coca-Cola overnight and again after application of artificial saliva for 3 min. Coca-Cola reduced the mean indentation hardness of enamel in the teeth, but the hardness was partially restored with artificial saliva (Salivart) and increased by 18% from the demineralized enamel hardness.

Association of ground hardness with injuries in rugby union

PubMed Central

Takemura, Masahiro; Schneiders, Anthony G; Bell, Melanie L; Milburn, Peter D

2007-01-01

Background Ground hardness is considered one of the possible risk factors associated with rugby injuries. Objectives To examine the contribution of ground hardness, rainfall and evapotranspiration to the incidence of injury, and to investigate seasonal injury bias throughout one full season of rugby union. Methods A prospective epidemiological study of rugby injuries was performed on 271 players from rugby union teams involved in the premier grade rugby competition in Dunedin, New Zealand. Ground hardness was measured before each match over 20 rounds with an industrial penetrometer, and local weather information was collected through the National Institute of Weather and Atmospheric Research and the Otago Regional Council. Poisson mixed models were used to describe injury incidence as a function of ground hardness throughout the season. Results The overall injury incidence during the season was 52 injuries per 1000 match player‐hours (95% CI 42 to 65). Although injury incidence decreased gradually by round with a rate ratio of 0.98 (95% CI 0.96 to 0.99) (p = 0.036), and the hardness of match grounds decreased significantly over the season (0.16 MPa/round, 95% CI 0.12 to 0.21, p<0.001), a non‐significant association was demonstrated between injury incidence and ground hardness. Injury incidence was not associated with a combination of ground hardness, rainfall and evapotranspiration on the day of the match or cumulative rainfall and evapotranspiration before each match. Conclusions Seasonal change in ground hardness and an early‐season bias of injuries was demonstrated. Although the contribution of ground hardness to injury incidence was not statistically significant, match round and injury incidence were highly correlated, confirming a seasonal bias, which may confound the relationship of injury to ground condition. PMID:17504786

An Internship Program for Deaf and Hard of Hearing Students in Polymer-Based Nanocomposites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cebe,P.; Cherdack, D.; Guertin, R.

2006-01-01

We report on our summer internship program in Polymer-Based Nanocomposites, for deaf and hard of hearing undergraduates who engage in classroom and laboratory research work in polymer physics. The unique attributes of this program are its emphasis on: 1. Teamwork; 2. Performance of a start-to-finish research project; 3. Physics of materials approach; and 4. Diversity. Students of all disability levels have participated in this program, including students who neither hear nor voice. The classroom and laboratory components address the materials chemistry and physics of polymer-based nanocomposites, crystallization and melting of polymers, the interaction of X-rays and light with polymers, mechanicalmore » properties of polymers, and the connection between thermal processing, structure, and ultimate properties of polymers. A set of Best Practices is developed for accommodating deaf and hard of hearing students into the laboratory setting. The goal is to bring deaf and hard of hearing students into the larger scientific community as professionals, by providing positive scientific experiences at a formative time in their educational lives.« less

Employees Encouraged to Exercise at Work on Take a Hike Day | Poster

Cancer.gov

By Ashley DeVine, Staff Writer Occupational Health Services and the Recreation and Welfare (R&W) Club Frederick teamed up for the first Take a Hike Day at NCI at Frederick on November 21. Employees were encouraged to hike, walk, jog, or run the 1.3-mile course around Fort Detrick. “For those employees who walk all the time, the event gave them a partner to walk with, and for

Inorganic particulates in pneumoconiotic lungs of hard metal grinders.

PubMed Central

Rüttner, J R; Spycher, M A; Stolkin, I

1987-01-01

Data from the analysis of lung dust in 16 metal grinders who had been exposed to hard metals between five and 44 years is reported. The mean latent time between the first exposure and analysis in biopsy or necropsy specimens was 33.6 years. Mineralogical and elementary analysis by a variety of techniques showed small or trace amounts of hard metal in all lungs. Many specimens, however, did not contain all hard metal components, cobalt, for example, being detected in four cases only. All the lungs contained quartz and silicates and in most of the necropsy cases carborundum and corundum could also be shown. Histologically no specific pattern was found. The appearances included mixed dust nodular pneumoconiosis, diffuse interstitial lung fibrosis, and foreign body and sarcoid like granulomatous changes. In view of the mixed dust exposure of the hard metal grinders and the variable histological appearance we think that the term "mixed dust pneumoconiosis in hard metal grinders" is more appropriate than "hard metal lung" to describe this condition. PMID:3676118

Take a Tip from the Cubs

ERIC Educational Resources Information Center

Fornaciari, James

2016-01-01

As legendary Cubs manager Joe Maddon did with his players, seeing students as people first works for teachers who hope to build cohesive classes that achieve. Maddon's strength was his emphasis on cultivating positive relationships among his players. Taking a tip from Maddon's strategy, Fornaciari, an Advanced Placement history teacher, shares…

'Reaching the hard to reach' - lessons learned from the VCS (voluntary and community Sector). A qualitative study

PubMed Central

2010-01-01

Background The notion 'hard to reach' is a contested and ambiguous term that is commonly used within the spheres of social care and health, especially in discourse around health and social inequalities. There is a need to address health inequalities and to engage in services the marginalized and socially excluded sectors of society. Methods This paper describes a pilot study involving interviews with representatives from eight Voluntary and Community Sector (VCS) organisations. The purpose of the study was to explore the notion of 'hard to reach' and perceptions of the barriers and facilitators to accessing services for 'hard to reach' groups from a voluntary and community sector perspective. Results The 'hard to reach' may include drug users, people living with HIV, people from sexual minority communities, asylum seekers, refugees, people from black and ethnic minority communities, and homeless people although defining the notion of the 'hard to reach' is not straight forward. It may be that certain groups resist engaging in treatment services and are deemed hard to reach by a particular service or from a societal stance. There are a number of potential barriers for people who may try and access services, including people having bad experiences in the past; location and opening times of services and how services are funded and managed. A number of areas of commonality are found in terms of how access to services for 'hard to reach' individuals and groups could be improved including: respectful treatment of service users, establishing trust with service users, offering service flexibility, partnership working with other organisations and harnessing service user involvement. Conclusions If health services are to engage with groups that are deemed 'hard to reach' and marginalised from mainstream health services, the experiences and practices for engagement from within the VCS may serve as useful lessons for service improvement for statutory health services. PMID

Taking Down the Walls: Communities and Educational Research in Canada's 21st Century. NALL Working Paper.

ERIC Educational Resources Information Center

Haig-Brown, Celia

To take community seriously in the conduct of educational research, the researcher should consider taking down epistemological walls and the "real" ones that confine the processes and products of academic labor to artificially isolated settings. Epistemologically, the question of walls relates to the kinds of knowledge competed over,…

Challenges and Opportunities for Testing Students Who Are Deaf or Hard of Hearing: Information for Educators on Creating Test Equity. Test Equity Considerations: Schools

ERIC Educational Resources Information Center

PEPNet-West, 2010

2010-01-01

For most students, test taking is a challenge. For students who are deaf or hard of hearing, classroom quizzes, tests, and exams are even more challenging. Standardized tests--The SAT, ACT, state proficiency tests, No Child Left Behind annual tests, and psychoeducational evaluations--present additional challenges for students who are deaf or hard…

Calcium nephrolithiasis: effect of water hardness on urinary electrolytes.

PubMed

Schwartz, Bradley F; Schenkman, Noah S; Bruce, Jeremy E; Leslie, Stephen W; Stoller, Marshall L

2002-07-01

To analyze the impact of water hardness from public water supplies on calcium stone incidence and 24-hour urine chemistries in patients with known calcium urinary stone formation. Patients are frequently concerned that their public water supply may contribute to urinary stone disease. Investigators have documented an inverse relationship between water hardness and calcium lithogenesis. Others have found no such association. Patients who form calcium stones (n = 4833) were identified geographically by their zip code. Water hardness information from distinct geographic public water supplies was obtained, and patient 24-hour urine chemistries were evaluated. Drinking water hardness was divided into decile rankings on the basis of the public water supply information obtained from the Environmental Protection Agency. These data were compared with patient questionnaires and 24-hour urine chemistries. The calcium and magnesium levels in the drinking water were analyzed as independent variables. The number of total lifetime stone episodes was similar between patients residing in areas with soft public water and hard public water. Patients consuming the softest water decile formed 3.4 lifetime stones and those who consumed the hardest water developed 3.0 lifetime stones (P = 0.0017). The 24-hour urine calcium, magnesium, and citrate levels increased directly with drinking water hardness, and no significant change was found in urinary oxalate, uric acid, pH, or volume. The impact of water hardness on urinary stone formation remains unclear, despite a weak correlation between water hardness and urinary calcium, magnesium, and citrate excretion. Tap water, however, can change urinary electrolytes in patients who form calcium stones.

Retraction of Hard, Lozano, and Tversky (2006)

ERIC Educational Resources Information Center

Hard, B. M.; Lozano, S. C.; Tversky, B.

2008-01-01

Reports a retraction of "Hierarchical encoding of behavior: Translating perception into action" by Bridgette Martin Hard, Sandra C. Lozano and Barbara Tversky (Journal of Experimental Psychology: General, 2006[Nov], Vol 135[4], 588-608). All authors retract this article. Co-author Tversky and co-author Hard believe that the research results cannot…

Optimization of Error-Bounded Lossy Compression for Hard-to-Compress HPC Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Di, Sheng; Cappello, Franck

Since today’s scientific applications are producing vast amounts of data, compressing them before storage/transmission is critical. Results of existing compressors show two types of HPC data sets: highly compressible and hard to compress. In this work, we carefully design and optimize the error-bounded lossy compression for hard-tocompress scientific data. We propose an optimized algorithm that can adaptively partition the HPC data into best-fit consecutive segments each having mutually close data values, such that the compression condition can be optimized. Another significant contribution is the optimization of shifting offset such that the XOR-leading-zero length between two consecutive unpredictable data points canmore » be maximized. We finally devise an adaptive method to select the best-fit compressor at runtime for maximizing the compression factor. We evaluate our solution using 13 benchmarks based on real-world scientific problems, and we compare it with 9 other state-of-the-art compressors. Experiments show that our compressor can always guarantee the compression errors within the user-specified error bounds. Most importantly, our optimization can improve the compression factor effectively, by up to 49% for hard-tocompress data sets with similar compression/decompression time cost.« less

Relationship Between Crystalline Structure and Hardness of Ti-Si-N-O Coatings Fabricated by dc Sputtering

NASA Astrophysics Data System (ADS)

García-González, Leandro; Hernández-Torres, Julián; Mendoza-Barrera, Claudia; Meléndez-Lira, Miguel; García-Ramírez, Pedro J.; Martínez-Castillo, Jaime; Sauceda, Ángel; Herrera-May, Agustin L.; Muñoz Saldaña, Juan; Espinoza-Beltrán, Francisco J.

2008-08-01

Ti-Si-N-O coatings were deposited on AISI D2 tool steel and silicon substrates by dc reactive magnetron co-sputtering using a target of Ti-Si with a constant area ratio of 0.2. The substrate temperature was 400 °C and reactive atmosphere of nitrogen and argon. For all samples, argon flow was maintained constant at 25 sccm, while the flow of the nitrogen was varied to analyze the structural changes related to chemical composition and resistivity. According to results obtained by x-ray diffraction and stoichiometry calculations by x-ray energy dispersive spectroscopy the Ti-Si-N-O coatings contain two solid solutions. The higher crystalline part corresponds to titanium oxynitrure. Hardness tests on the coatings were carried out using the indentation work model and the hardness value was determined. Finally, the values of hardness were corroborated by nanoindentation test, and values of Young’s modulus and elastic recovery were discussed. We concluded that F2TSN sample ( F Ar = 25 sccm, F N = 5 sccm, P = 200 W, and P W = 8.9 × 10-3 mbar) presented the greatest hardness and the lowest resistivity values, due to its preferential crystalline orientation.

The production and tribology of hard facing coatings for agricultural applications

NASA Astrophysics Data System (ADS)

Roffey, Paul

Abrasive wear is a significant issue in many industries but is of particular significance in agriculture. This research is being carried out due to the demand for a hard wearing, economical coating for use in the agricultural industry.A primary objective has been to review and develop an in depth understanding of the type of wear suffered by metal shares in agricultural soils. The affect of soil properties and abrasive wear environments on the amount of wear that occurs, and the way in which material properties can be used to reduce or prevent this has also been investigated. A review of the diverse range of soil properties, such as the mineral content, moisture content, soils strengths has been carried out in order to create an appropriate wear test procedure.The coatings developed for testing were modifications to an existing powder metallurgy coating. The modifications were made by the addition of selected hard phases to the powder prior to sintering. The resulting materials were characterised in terms of sinterability, hardness and abrasive wear resistance. Prior to commencing this work little or no data existed on the wear performance of the pre-existing coating. Wear resistance has been measured using a fixed ball micro-scale abrasive wear test (also known as the ball-cratering wear test) with SiC and SiO2 abrasives and also using a modified version of the ASTM G65 abrasive wear test which allowed testing in dry and wet modes. Limited field trials were performed to determine the abrasive wear resistance in real soil. Results from wear testing have determined that the optimum modification to the coating can improve performance compared to the unmodified coating.Detailed scanning electron microscopy (SEM) has been performed on the wear scars and has revealed the resultant wear mechanisms and role that the hard phase additions play in improving the wear resistance. The influence of the hard phase addition on the microstructure has also been studied.The wear

Methodological problems with gamma-ray burst hardness/intensity correlations

NASA Technical Reports Server (NTRS)

Schaefer, Bradley E.

1993-01-01

The hardness and intensity are easily measured quantities for all gamma-ray bursts (GRBs), and so, many past and current studies have sought correlations between them. This Letter presents many serious methodological problems with the practical definitions for both hardness and intensity. These difficulties are such that significant correlations can be easily introduced as artifacts of the reduction procedure. In particular, cosmological models of GRBs cannot be tested with hardness/intensity correlations with current instrumentation and the time evolution of the hardness in a given burst may be correlated with intensity for reasons that are unrelated to intrinsic change in the spectral shape.

Role-taking ability and social behavior in deaf school children.

PubMed

Cates, D S; Shontz, F C

1990-07-01

This study assessed the relationship between role-taking skill and social-emotional adjustment in deaf children. Twenty-three prelingually deafened boys and girls between 7 and 14 years of age were administered a role-taking task, surreptitious behavioral measures of helping and altruism, and a measure of nonverbal intelligence. In addition, two professionals experienced in working with deaf children rated the social and emotional adjustment, language/communication skills and role-taking ability of the participants. Performance on the role-taking task correlated positively with ratings of emotional adjustment, self-image, communicative effectiveness and role-taking skill. Role-taking performance, however, was not reliably related to any of the measures of social behavior. The study also considered several factors which may account for the apparent independence of role-taking and social behavior.

Working memory, reasoning, and expertise in medicine-insights into their relationship using functional neuroimaging.

PubMed

Hruska, Pam; Krigolson, Olav; Coderre, Sylvain; McLaughlin, Kevin; Cortese, Filomeno; Doig, Christopher; Beran, Tanya; Wright, Bruce; Hecker, Kent G

2016-12-01

Clinical reasoning is dependent upon working memory (WM). More precisely, during the clinical reasoning process stored information within long-term memory is brought into WM to facilitate the internal deliberation that affords a clinician the ability to reason through a case. In the present study, we examined the relationship between clinical reasoning and WM while participants read clinical cases with functional magnetic resonance imaging (fMRI). More specifically, we examined the impact of clinical case difficulty (easy, hard) and clinician level of expertise (2nd year medical students, senior gastroenterologists) on neural activity within regions of cortex associated with WM (i.e., the prefrontal cortex) during the reasoning process. fMRI was used to scan ten second-year medical students and ten practicing gastroenterologists while they reasoned through sixteen clinical cases [eight straight forward (easy) and eight complex (hard)] during a single 1-h scanning session. Within-group analyses contrasted the easy and hard cases which were then subsequently utilized for a between-group analysis to examine effects of expertise (novice > expert, expert > novice). Reading clinical cases evoked multiple neural activations in occipital, prefrontal, parietal, and temporal cortical regions in both groups. Importantly, increased activation in the prefrontal cortex in novices for both easy and hard clinical cases suggests novices utilize WM more so than experts during clinical reasoning. We found that clinician level of expertise elicited differential activation of regions of the human prefrontal cortex associated with WM during clinical reasoning. This suggests there is an important relationship between clinical reasoning and human WM. As such, we suggest future models of clinical reasoning take into account that the use of WM is not consistent throughout all clinical reasoning tasks, and that memory structure may be utilized differently based on level of expertise.

Valence change detection in memristive oxide based heterostructure cells by hard X-ray photoelectron emission spectroscopy

NASA Astrophysics Data System (ADS)

Kindsmüller, A.; Schmitz, C.; Wiemann, C.; Skaja, K.; Wouters, D. J.; Waser, R.; Schneider, C. M.; Dittmann, R.

2018-04-01

The switching mechanism of valence change resistive memory devices is widely accepted to be an ionic movement of oxygen vacancies resulting in a valence change of the metal cations. However, direct experimental proofs of valence changes in memristive devices are scarce. In this work, we have employed hard X-ray photoelectron emission microscopy (PEEM) to probe local valence changes in Pt/ZrOx/Ta memristive devices. The use of hard X-ray radiation increases the information depth, thus providing chemical information from buried layers. By extracting X-ray photoelectron spectra from different locations in the PEEM images, we show that zirconia in the active device area is reduced compared to a neighbouring region, confirming the valence change in the ZrOx film during electroforming. Furthermore, we succeeded in measuring the Ta 4f spectrum for two different resistance states on the same device. In both states, as well as outside the device region, the Ta electrode is composed of different suboxides without any metallic contribution, hinting to the formation of TaOx during the deposition of the Ta thin film. We observed a reduction of the Ta oxidation state in the low resistance state with respect to the high resistive state. This observation is contradictory to the established model, as the internal redistribution of oxygen between ZrOx and the Ta electrode during switching would lead to an oxidation of the Ta layer in the low resistance state. Instead, we have to conclude that the Ta electrode takes an active part in the switching process in our devices and that oxygen is released and reincorporated in the ZrOx/TaOx bilayer during switching. This is confirmed by the degradation of the high resistance state during endurance measurements under vacuum.

CSI: Hard Drive

ERIC Educational Resources Information Center

Sturgeon, Julie

2008-01-01

Acting on information from students who reported seeing a classmate looking at inappropriate material on a school computer, school officials used forensics software to plunge the depths of the PC's hard drive, searching for evidence of improper activity. Images were found in a deleted Internet Explorer cache as well as deleted file space.…

Relationships Between Abrasive Wear, Hardness, and Surface Grinding Characteristics of Titanium-Based Metal Matrix Composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blau, Peter Julian; Jolly, Brian C

2009-01-01

The objective of this work was to support the development of grinding models for titanium metal-matrix composites (MMCs) by investigating possible relationships between their indentation hardness, low-stress belt abrasion, high-stress belt abrasion, and the surface grinding characteristics. Three Ti-based particulate composites were tested and compared with the popular titanium alloy Ti-6Al-4V. The three composites were a Ti-6Al-4V-based MMC with 5% TiB{sub 2} particles, a Ti-6Al-4V MMC with 10% TiC particles, and a Ti-6Al-4V/Ti-7.5%W binary alloy matrix that contained 7.5% TiC particles. Two types of belt abrasion tests were used: (a) a modified ASTM G164 low-stress loop abrasion test, and (b)more » a higher-stress test developed to quantify the grindability of ceramics. Results were correlated with G-ratios (ratio of stock removed to abrasives consumed) obtained from an instrumented surface grinder. Brinell hardness correlated better with abrasion characteristics than microindentation or scratch hardness. Wear volumes from low-stress and high-stress abrasive belt tests were related by a second-degree polynomial. Grindability numbers correlated with hard particle content but were also matrix-dependent.« less

The Influence of Wheel/Rail Contact Conditions on the Microstructure and Hardness of Railway Wheels

PubMed Central

Davis, Claire

2014-01-01

The susceptibility of railway wheels to wear and rolling contact fatigue damage is influenced by the properties of the wheel material. These are influenced by the steel composition, wheel manufacturing process, and thermal and mechanical loading during operation. The in-service properties therefore vary with depth below the surface and with position across the wheel tread. This paper discusses the stress history at the wheel/rail contact (derived from dynamic simulations) and observed variations in hardness and microstructure. It is shown that the hardness of an “in-service” wheel rim varies significantly, with three distinct effects. The underlying hardness trend with depth can be related to microstructural changes during manufacturing (proeutectoid ferrite fraction and pearlite lamellae spacing). The near-surface layer exhibits plastic flow and microstructural shear, especially in regions which experience high tangential forces when curving, with consequentially higher hardness values. Between 1 mm and 7 mm depth, the wheel/rail contacts cause stresses exceeding the material yield stress, leading to work hardening, without a macroscopic change in microstructure. These changes in material properties through the depth of the wheel rim would tend to increase the likelihood of crack initiation on wheels toward the end of their life. This correlates with observations from several train fleets. PMID:24526883

"The pure hard slog that nursing is . . .": a qualitative analysis of nursing work.

PubMed

Bogossian, Fiona; Winters-Chang, Peta; Tuckett, Anthony

2014-09-01

To explore nurses' perceptions of the nature of nursing work as a factor that contributes to attrition from the profession. A nonpurposive sample of nurses from the Nurses and Midwives e-cohort Study in Australia, New Zealand, and the United Kingdom provided electronic responses about reasons for leaving the profession. Data were then subjected to qualitative content analysis. Nurses at the "coal face," that is, those who actually do the work of nursing, in real working conditions, express dissatisfaction in relation to hygiene factors relating to the nature of nursing work and attribute these to nurses leaving the profession: workload, shift work, violence, and financial remuneration. Nurses' satisfaction with work and motivation to work are being sorely tested. There is manifest tension between the core concepts of nursing-compassion and care-and a system of work that actively precludes nurses from being able to exhibit these virtues and fails to reward them. Workload, shift work, violence, and financial remuneration are drivers of attrition and need to be addressed. Implications from this study are fourfold: determination of nursing workload, mitigating the impact of shift work, providing safe work environments, and adequate financial remuneration. © 2014 Sigma Theta Tau International.

Efficacy of massage treatment technique in masseter muscle hardness: robotic experimental approach.

PubMed

Hiraiwa, Yuichiro; Ariji, Yoshiko; Kise, Yoshitaka; Sakuma, Shigemitsu; Kurita, Kenichi; Ariji, Eiichiro

2013-10-01

The study aimed to clarify the masseter muscle hardness in patients with myofascial pain, to examine their changes after massage, and to analyze whether the hardness can be an index for massage treatment. Sixteen patients with myofascial pain (12 with unilateral and 4 with bilateral masseter muscle pain) and 24 healthy volunteers were enrolled in this study. The masseter hardness between patients and the healthy volunteers was compared. The changes in the hardness in patients after massage were examined. The relation of the hardness with massage regimens and efficacies was analyzed. There was a significant right-and-left difference of the hardness in patients, although there was no difference in the healthy volunteers. The hardness decreased after massage. The pretreatment asymmetry index of the hardness showed a significant correlation with the massage pressure. It was concluded that there was a significant difference between the right and left masseter hardness in patients with myofascial pain. After massage treatment, the masseter hardness and right-and-left difference decreased. The hardness may be an index for determining the massage pressure.

American College Students and Protestant Work Ethic.

ERIC Educational Resources Information Center

Wentworth, Diane Keyser; Chell, Robert M.

1997-01-01

Hypothesizes that older, graduate, and non-U.S. students would express a greater belief in Max Weber's "Protestant work ethic" (PWE), that posits hard work and delayed gratification as bases for achievement. Finds that younger students, male students, and foreign students have the strongest beliefs in the PWE. Explains the findings. (DSK)

Alignment of single-case design (SCD) research with individuals who are deaf or hard of hearing with the what Works Clearinghouse standards for SCD research.

PubMed

Wendel, Erica; Cawthon, Stephanie W; Ge, Jin Jin; Beretvas, S Natasha

2015-04-01

The authors assessed the quality of single-case design (SCD) studies that assess the impact of interventions on outcomes for individuals who are deaf or hard-of-hearing (DHH). More specifically, the What Works Clearinghouse (WWC) standards for SCD research were used to assess design quality and the strength of evidence of peer-reviewed studies available in the peer-reviewed, published literature. The analysis yielded four studies that met the WWC standards for design quality, of which two demonstrated moderate to strong evidence for efficacy of the studied intervention. Results of this review are discussed in light of the benefits and the challenges to applying the WWC design standards to research with DHH individuals and other diverse, low-incidence populations. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Primary Care Practice Transformation Is Hard Work

PubMed Central

Crabtree, Benjamin F.; Nutting, Paul A.; Miller, William L.; McDaniel, Reuben R.; Stange, Kurt C.; Jaén, Carlos Roberto; Stewart, Elizabeth

2010-01-01

Background Serious shortcomings remain in clinical care in the United States despite widespread use of improvement strategies for enhancing clinical performance based on knowledge transfer approaches. Recent calls to transform primary care practice to a patient-centered medical home present even greater challenges and require more effective approaches. Methods Our research team conducted a series of National Institutes of Health funded descriptive and intervention projects to understand organizational change in primary care practice settings, emphasizing a complexity science perspective. The result was a developmental research effort that enabled the identification of critical lessons relevant to enabling practice change. Results A summary of findings from a 15-year program of research highlights the limitations of viewing primary care practices in the mechanistic terms that underlie current or traditional approaches to quality improvement. A theoretical perspective that views primary care practices as dynamic complex adaptive systems with “agents” who have the capacity to learn, and the freedom to act in unpredictable ways provides a better framework for grounding quality improvement strategies. This framework strongly emphasizes that quality improvement interventions should not only use a complexity systems perspective, but also there is a need for continual reflection, careful tailoring of interventions, and ongoing attention to the quality of interactions among agents in the practice. Conclusions It is unlikely that current strategies for quality improvement will be successful in transforming current primary care practice to a patient-centered medical home without a stronger guiding theoretical foundation. Our work suggests that a theoretical framework guided by complexity science can help in the development of quality improvement strategies that will more effectively facilitate practice change. PMID:20856145

KENNEDY SPACE CENTER, FLA. - Former astronaut Story Musgrave signs autographs for employees’ children after his presentation during a welcome ceremony in the IMAX Theatre, KSC Visitor Complex. Employees were invited to share their work experience with their children for Take Our Children to Work Day.

NASA Image and Video Library

2003-07-24

KENNEDY SPACE CENTER, FLA. - Former astronaut Story Musgrave signs autographs for employees’ children after his presentation during a welcome ceremony in the IMAX Theatre, KSC Visitor Complex. Employees were invited to share their work experience with their children for Take Our Children to Work Day.

Ti1-xAux Alloys: Hard Biocompatible Metals and Their Possible Applications

NASA Astrophysics Data System (ADS)

Svanidze, Eteri; Besara, Tiglet; Ozaydin, M. Fevzi; Xin, Yan; Han, Ke; Liang, Hong; Siegrist, Theo; Morosan, Emilia

2015-03-01

The search for new hard materials is often challenging from both theoretical and experimental points of view. Furthermore, using materials for biomedical applications calls for alloys with high biocompatibility which are even more sparse. The Ti1-xAux (0 . 22 <= x <= 0 . 8) exhibit extreme hardness and strength values, elevated melting temperatures (compared to those of constituent elements), reduced density compared to Au, high malleability, bulk metallicity, high biocompatibility, low wear, reduced friction, potentially high radio opacity, as well as osseointegration. All these properties render the Ti1-xAux alloys particularly useful for orthopedic, dental, and prosthetic applications, where they could be used as both permanent and temporary components. Additionally, the ability of Ti1-xAux alloys to adhere to ceramic parts could reduce the weight and cost of these components. The work at Rice was supported by NSF DMR 0847681 (E.M. and E.S.).

How a masculine work ethic and economic circumstances affect uptake of HIV treatment: experiences of men from an artisanal gold mining community in rural eastern Uganda

PubMed Central

Siu, Godfrey E; Wight, Daniel; Seeley, Janet

2012-01-01

Background Current data from Uganda indicate that, compared to women, men are under-represented in HIV treatment, seek treatment later and have a higher mortality while on antiretroviral therapy (ART). By focusing on a masculine work ethic as one of the most predominant expressions of masculinity, this study explores why for some men HIV treatment enhances their masculinity while for others it undermines masculine work identity, leading them to discontinue the treatment. Methods Participant observation and 26 in-depth interviews with men were conducted in a gold mining village in Eastern Uganda between August 2009 and August 2010. Interviewees included men who were taking HIV treatment, who had discontinued treatment, who suspected HIV infection but had not sought testing, or who had other symptoms unrelated to HIV infection. Results Many participants reported spending large proportions of their income, alleviating symptoms prior to confirming their HIV infection. This seriously undermined their sense of masculinity gained from providing for their families. Disclosing HIV diagnosis and treatment to employers and work colleagues could reduce job offers and/or collaborative work, as colleagues feared working with “ill” people. Drug side-effects affected work, leading some men to discontinue the treatment. Despite being on ART, some men believed their health remained fragile, leading them to opt out of hard work, contradicting their reputation as hard workers. However, some men on treatment talked about “resurrecting” due to ART and linked their current abilities to work again to good adherence. For some men, it was work colleagues who suggested testing and treatment-seeking following symptoms. Conclusions The central role of a work ethic in expressing masculinity can both encourage and discourage men's treatment-seeking for AIDS. HIV testing and treatment may be sought in order to improve health and get back to work, thereby in the process regaining one

How a masculine work ethic and economic circumstances affect uptake of HIV treatment: experiences of men from an artisanal gold mining community in rural eastern Uganda.

PubMed

Siu, Godfrey E; Wight, Daniel; Seeley, Janet

2012-06-14

Current data from Uganda indicate that, compared to women, men are under-represented in HIV treatment, seek treatment later and have a higher mortality while on antiretroviral therapy (ART). By focusing on a masculine work ethic as one of the most predominant expressions of masculinity, this study explores why for some men HIV treatment enhances their masculinity while for others it undermines masculine work identity, leading them to discontinue the treatment. Participant observation and 26 in-depth interviews with men were conducted in a gold mining village in Eastern Uganda between August 2009 and August 2010. Interviewees included men who were taking HIV treatment, who had discontinued treatment, who suspected HIV infection but had not sought testing, or who had other symptoms unrelated to HIV infection. Many participants reported spending large proportions of their income, alleviating symptoms prior to confirming their HIV infection. This seriously undermined their sense of masculinity gained from providing for their families. Disclosing HIV diagnosis and treatment to employers and work colleagues could reduce job offers and/or collaborative work, as colleagues feared working with "ill" people. Drug side-effects affected work, leading some men to discontinue the treatment. Despite being on ART, some men believed their health remained fragile, leading them to opt out of hard work, contradicting their reputation as hard workers. However, some men on treatment talked about "resurrecting" due to ART and linked their current abilities to work again to good adherence. For some men, it was work colleagues who suggested testing and treatment-seeking following symptoms. The central role of a work ethic in expressing masculinity can both encourage and discourage men's treatment-seeking for AIDS. HIV testing and treatment may be sought in order to improve health and get back to work, thereby in the process regaining one's masculine reputation as a hard worker and provider

On the scaling behavior of hardness with ligament diameter of nanoporous-Au: Constrained motion of dislocations along the ligaments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Viswanath, R. N.; Polaki, S. R.; Rajaraman, R.

The scaling behavior of hardness with ligament diameter and vacancy defect concentration in nanoporous Au (np-Au) has been investigated using a combination of Vickers Hardness, Scanning electron microscopy, and positron lifetime measurements. It is shown that for np-Au, the hardness scales with the ligament diameter with an exponent of −0.3, that is, at variance with the conventional Hall-Petch exponent of −0.5 for bulk systems, as seen in the controlled experiments on cold worked Au with varying grain size. The hardness of np-Au correlates with the vacancy concentration C{sub V} within the ligaments, as estimated from positron lifetime experiments, and scalesmore » as C{sub V}{sup 1/2}, pointing to the interaction of dislocations with vacancies. The distinctive Hall-Petch exponent of −0.3 seen for np-Au, with ligament diameters in the range of 5–150 nm, is rationalized by invoking the constrained motion of dislocations along the ligaments.« less

Distribution of cadmium, iron and zinc in millstreams of hard winter wheat (Triticum aestivum L.)

USDA-ARS?s Scientific Manuscript database

Hard winter wheat (Triticum aestivum L.) is a major crop in the Great Plains of the United 14 States, and our previous work demonstrated that wheat genotypes vary for grain cadmium 15 accumulation, with some exceeding the CODEX standard (0.2 mg kg-1). Previous reports of 16 cadmium distribution in ...

Hard X-ray time profiles and acceleration processes in large solar flares

NASA Technical Reports Server (NTRS)

Bai, T.; Ramaty, R.

1979-01-01

The hard X-ray time profiles of the (1972) August 4 and 7 flares are investigated, taking into account a comparison of the time profiles of different energy channels. It is shown that for these flares the temporal features of the intensity profiles of higher energy channels are delayed with respect to those of channel 1. The delay time gradually increases to approximately 5 sec as the channel number increases from 1 to 5, and it jumps to approximately 15 sec for channels 6 and 7. A description is presented of a model in which the delay and other characteristics of the observed time profiles in channels 1-5 are self-consistently explained by the increase of the electron energy loss time with electron energy.

Development of a Hybrid Gas Detector/Phoswich for Hard X-Ray Astronomy

NASA Technical Reports Server (NTRS)

Pimperl, M. M.; Ramsey, B. D.; Austin, R. A.; Minamitani, T.; Weisskopf, M. C.; Grindlay, J. E.; Lum, K. S. K.; Manandhar, R. P.

1994-01-01

A hybrid detector is under development for use as a balloon-borne instrument in hard x-ray astronomy. The detector provides broad band coverage by coupling an optical avalanche chamber to a phoswich. The optical avalanche chamber yields superior instrument response at low energies while the scintillator takes over at the higher energies where the gas becomes transparent: at 25 keV, the addition of the gas chamber improves the energy resolution by a factor of 2.5 and the spatial resolution by a factor of 10 as compared to the stand-alone response of the phoswich. A half-scale prototype instrument is being constructed for test purposes and to help resolve a number of design questions involving the coupling of the two components.

20 CFR 10.505 - What actions must the employer take?

Code of Federal Regulations, 2010 CFR

2010-04-01

... AMENDED Continuing Benefits Return to Work-Employer's Responsibilities § 10.505 What actions must the employer take? Upon authorizing medical care, the employer should advise the employee in writing as soon as... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false What actions must the employer take? 10.505...

3D Bioprinting Technologies for Hard Tissue and Organ Engineering

PubMed Central

Wang, Xiaohong; Ao, Qiang; Tian, Xiaohong; Fan, Jun; Wei, Yujun; Hou, Weijian; Tong, Hao; Bai, Shuling

2016-01-01

Hard tissues and organs, including the bones, teeth and cartilage, are the most extensively exploited and rapidly developed areas in regenerative medicine field. One prominent character of hard tissues and organs is that their extracellular matrices mineralize to withstand weight and pressure. Over the last two decades, a wide variety of 3D printing technologies have been adapted to hard tissue and organ engineering. These 3D printing technologies have been defined as 3D bioprinting. Especially for hard organ regeneration, a series of new theories, strategies and protocols have been proposed. Some of the technologies have been applied in medical therapies with some successes. Each of the technologies has pros and cons in hard tissue and organ engineering. In this review, we summarize the advantages and disadvantages of the historical available innovative 3D bioprinting technologies for used as special tools for hard tissue and organ engineering. PMID:28773924

3D Bioprinting Technologies for Hard Tissue and Organ Engineering.

PubMed

Wang, Xiaohong; Ao, Qiang; Tian, Xiaohong; Fan, Jun; Wei, Yujun; Hou, Weijian; Tong, Hao; Bai, Shuling

2016-09-27

Hard tissues and organs, including the bones, teeth and cartilage, are the most extensively exploited and rapidly developed areas in regenerative medicine field. One prominent character of hard tissues and organs is that their extracellular matrices mineralize to withstand weight and pressure. Over the last two decades, a wide variety of 3D printing technologies have been adapted to hard tissue and organ engineering. These 3D printing technologies have been defined as 3D bioprinting. Especially for hard organ regeneration, a series of new theories, strategies and protocols have been proposed. Some of the technologies have been applied in medical therapies with some successes. Each of the technologies has pros and cons in hard tissue and organ engineering. In this review, we summarize the advantages and disadvantages of the historical available innovative 3D bioprinting technologies for used as special tools for hard tissue and organ engineering.

Laser Ablatin of Dental Hard Tissue

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seka, W.; Rechmann, P.; Featherstone, J.D.B.

This paper discusses ablation of dental hard tissue using pulsed lasers. It focuses particularly on the relevant tissue and laser parameters and some of the basic ablation processes that are likely to occur. The importance of interstitial water and its phase transitions is discussed in some detail along with the ablation processes that may or may not directly involve water. The interplay between tissue parameters and laser parameters in the outcome of the removal of dental hard tissue is discussed in detail.

Radiation Hardness Assurance (RHA): Challenges and New Considerations

NASA Technical Reports Server (NTRS)

Campola, Michael J.

2017-01-01

Use of commercial-off-the-shelf (COTS) components and emerging technologies often require space flight missions to accept elevated risk. The Radiation Hardness Assurance (RHA) flow includes environment definition, hazard evaluation, requirements definition, evaluation of design, and design trades to accommodate and mitigate the risk a project or program takes. Depending on the mission profile and environment, different missions may not necessarily benefit from the same risk reduction efforts or cost reduction attempts. While this poses challenges for the radiation engineer, it also presents opportunities to tailor the RHA flow to minimize risk based on the environment or design criticality while remaining within budget. This presentation will focus on an approach to RHA amidst the present challenges, using the same RHA flow as in the past, with examples from recent radiation test results. The current challenges and the types of risk will be identified. How these risks drive requirements development and realization will be explained with examples of device results and data for single event effects (SEE) and in one case total ionizing dose (TID).

The farrier's work environment.

PubMed

Löfqvist, Lotta; Pinzke, Stefan

2012-01-01

The horse industry in Sweden has rapidly expanded in recent years. This increasing number of horses implies a greater need for more farriers. Shoeing a horse is hard physical work, and includes awkward work postures and repetitive movements. It is well known that hard physical work increases the risk of injuries and musculoskeletal problems. The risk is especially high for musculoskeletal disorders when certain movements are constantly repeated. Heavy or repeated unilateral loads lead to considerable stress on the muscles, which can lead to rupture and fatigue that can cause long term problems. A case study showed that farriers worked 75% of their work time with their backs in bent positions (often more than 70 degrees). Farriers are also exposed to risk factors in their physical environment like dust, noise and poor lighting. Risk of kicks and bites, eye injuries and burns are other factors that make their work environment hazardous. There are only a few studies available that have documented the farriers' working environment and these are not of recent date. A US study from 1984 described kicks and bites from horses, metal splinters in the eyes, heat exhaustion and problematic postures to be perceived as the greatest risks in their work. The back, knees and wrists were the most exposed body regions. There is a need for more current and in-depth studies investigating the farriers' working conditions in order to gain more knowledge of their health and work environment. The aim of the present study is to investigate the physical health and work environment of farriers. The investigation will use questionnaires, work load measurements and workplace analysis. The results will serve as a base for improvements concerning the design of the workplace, equipment, tools and aids as well as supplying recommendations about physical exercise and the correct work technique, etc. The results are planned to be incorporated in the education of farriers.

Does hard insertion and space improve shock absorption ability of mouthguard?

PubMed

Takeda, Tomotaka; Ishigami, Keiichi; Handa, Jun; Naitoh, Kaoru; Kurokawa, Katsuhide; Shibusawa, Mami; Nakajima, Kazunori; Kawamura, Shintaro

2006-04-01

Mouthguards are expected to reduce sports-related orofacial injuries. Numerous studies have been conduced to improve the shock absorption ability of mouthguards using air cells, sorbothane, metal wire, or hard material insertion. Most of these were shown to be effective; however, the result of each study has not been applied to clinical use. The aim of this study was to develop mouthguards that have sufficient prevention ability and ease of clinical application with focus on a hard insertion and space. Ethylene vinyl acetate (EVA) mouthguard blank used was Drufosoft and the acrylic resin was Biolon (Dreve-Dentamid GMBH, Unna, Germany). Three types of mouthguard samples tested were constructed by means of a Dreve Drufomat (Type SO, Dreve-Dentamid) air pressure machine: the first was a conventional laminated type of EVA mouthguard material; the second was a three layer type with acrylic resin inner layer (hard-insertion); the third was the same as the second but with space that does not come into contact with tooth surfaces (hard + space). As a control, without any mouthguard condition (NOMG) was measured. A pendulum type impact testing machine with interchangeable impact object (steel ball and baseball) and dental study model (D17FE-NC.7PS, Nissin, Tokyo, Japan) with the strain gages (KFG-1-120-D171-11N30C2: Kyowa, Tokyo, Japan) applied to teeth and the accelerometer to the dentition (AS-A YG-2768 100G, Kyowa) were used to measure transmitted forces. Statistical analysis (anova, P < 0.01) showed significant differences among four conditions of NOMG and three different mouthguards in both objects and sensor. About acceleration: in a steel ball which was a harder impact object, shock absorption ability of about 40% was shown with conventional EVA and hard-insertion and about 50% with hard + space. In a baseball that was softer compared with steel ball, a decrease rate is smaller, reduction (EVA = approximately 4%, hard-insertion = approximately 12%, hard + space

Working Hard and Making Do: Surviving in Small Town America.

ERIC Educational Resources Information Center

Nelson, Margaret K.; Smith, Joan

This book reports on the effects of economic restructuring on the livelihood of working families in a rural Vermont county. Specifically, a study investigated family strategies to ensure and enhance daily survival including gainful employment (informal and formal), moonlighting, self-provisioning efforts, and non-monetary exchanges with other…

Taking Root: South Carolina's Lessons for Sustaining the College- and Career-Ready Agenda

ERIC Educational Resources Information Center

Achieve, Inc., 2009

2009-01-01

To give states the information they need to sustain hard-fought education reform effectively, Achieve conducted research on state education reforms that have been sustained successfully for over a decade or more. Funded by the GE Foundation, Achieve hopes this work will help other state leaders, wherever they may be on their road to reform,…

Hard-Boiled for Hard Times in Leonardo Padura Fuentes's Detective Fiction

ERIC Educational Resources Information Center

Song, H. Rosi

2009-01-01

Focusing on Leonardo Padura Fuentes's hard-boiled fiction, this essay traces the origin and evolution of the genre in Cuba. Padura Fuentes has challenged the officially sanctioned socialist "literatura policial" that became popular in the 1970s and 1980s. creating a new model of criticism that is not afraid to confront the island's socio-economic…

Diamond Tool Specific Wear Rate Assessment in Granite Machining by Means of Knoop Micro-Hardness and Process Parameters

NASA Astrophysics Data System (ADS)

Goktan, R. M.; Gunes Yılmaz, N.

2017-09-01

The present study was undertaken to investigate the potential usability of Knoop micro-hardness, both as a single parameter and in combination with operational parameters, for sawblade specific wear rate (SWR) assessment in the machining of ornamental granites. The sawing tests were performed on different commercially available granite varieties by using a fully instrumented side-cutting machine. During the sawing tests, two fundamental productivity parameters, namely the workpiece feed rate and cutting depth, were varied at different levels. The good correspondence observed between the measured Knoop hardness and SWR values for different operational conditions indicates that it has the potential to be used as a rock material property that can be employed in preliminary wear estimations of diamond sawblades. Also, a multiple regression model directed to SWR prediction was developed which takes into account the Knoop hardness, cutting depth and workpiece feed rate. The relative contribution of each independent variable in the prediction of SWR was determined by using test statistics. The prediction accuracy of the established model was checked against new observations. The strong prediction performance of the model suggests that its framework may be applied to other granites and operational conditions for quantifying or differentiating the relative wear performance of diamond sawblades.

Caregiver Leave-Taking in Spain: Rate, Motivations, and Barriers.

PubMed

Rogero-García, Jesús; García-Sainz, Cristina

2016-01-01

This paper aims to (1) determine the rate of (full- and part-time) caregiver leave-taking in Spain, (2) identify the reasons conducive to a more intense use of this resource, and (3) ascertain the main obstacles to its use, as perceived by caregivers. All 896 people covered by the sample were engaging in paid work and had cared for dependent adults in the last 12 years. This resource, in particular the full-time alternative, was found to be a minority option. The data showed that legal, work-related, and family and gender norm issues are the four types of factors that determine the decision to take such leaves. The most significant obstacles to their use are the forfeiture of income and the risk of losing one's job. Our results suggest that income replacement during a leave would increase the take-up of these resources. Moreover, enlargement of public care services would promote the use of leave as a free choice of caregivers.

The Dopamine Receptor D4 Gene (DRD4) and Financial Risk-Taking: Stimulating and Instrumental Risk-Taking Propensity and Motivation to Engage in Investment Activity

PubMed Central

Muda, Rafał; Kicia, Mariusz; Michalak-Wojnowska, Małgorzata; Ginszt, Michał; Filip, Agata; Gawda, Piotr; Majcher, Piotr

2018-01-01

The Dopamine receptor D4 gene (DRD4) has been previously linked to financial risk-taking propensity. Past works demonstrated that individuals with a specific variant of the DRD4 gene (7R+) are more risk-seeking than people without it (7R−). The most prominent explanation for this effect is the fact that 7R+ individuals are less sensitive to dopamine and thus seek more stimulation to generate “normal” dopaminergic activity and feel pleasure. However, results about this relationship have not been conclusive, and some revealed a lack of the relationship. In the current work, we tested if those unclear results might be explained by the motivation that underlies the risk-taking activity; i.e., if people take risks to feel excitement or if they take risk to obtain a specific goal. In our study we tested the differences in risk-taking between 7R+ and 7R− among people who are experienced in financial risk-taking (113 investors) and non-experienced financial decision makers (104 non-investors). We measured risk-taking propensity with the Holt-Laury test and the Stimulating-Instrumental Risk Inventory. Moreover, we asked investors about their motivations for engaging in investment activity. Our study is the next one to report a lack of differences in risk-taking between 7R+ and 7R− individuals. As well, our results did not indicate any differences between the 7R+ and 7R− investors in motivation to engage in investment activity. We only observed that risk-taking propensity was higher among investors than non-investors and this was noticed for all measures. More research is needed to better understand the genetic foundations of risk-taking, which could answer the question about the substantial variation in the domain of risky financial decisions. PMID:29551965

Microstructure and hardness performance of AA6061 aluminium composite using friction stir processing

NASA Astrophysics Data System (ADS)

Marini, C. D.; Fatchurrohman, N.

2018-04-01

Rice husk ash (RHA) is an industrial waste that has become a potential reinforced material for aluminium matrix composite (AMCs) due to low cost and abundantly available resources. Friction stir processing (FSP) has been introduced as a method to modify surface properties of the metal and alloy including theirs composite as well. The present work reports the production and characterization of AA6061 and AA6061/5 vol% RHA using FSP using parameters rotation speed 1000 rpm and traversed speed 25 mm/min. The microstructure was studied using optical microscopy (OM). A homogenous dispersion of RHA particles was obtained in the composite. No agglomeration or segregation was observed. The produced composite exhibited a fine grain structure. An improvement in hardness profile was observed as AA6061/5 vol% RHA improves in hardness compared to FSPed of AA6061 without reinforcement.

Oral and Written Discourse Skills in Deaf and Hard of Hearing Children: The Role of Reading and Verbal Working Memory

ERIC Educational Resources Information Center

Arfé, Barbara

2015-01-01

This study examined the discourse skills of deaf and hard of hearing (DHH) children by comparing their oral and written narratives produced for the wordless picture book, "Frog, Where Are You?" (Mayer, 1969), with those of school-age-matched hearing peers. The written stories produced by 42 Italian 7- to 15-year-old children with…

Superordinate Precision: An Examination of Academic Writing among Bilingual Deaf and Hard of Hearing Students

ERIC Educational Resources Information Center

Scott, Jessica A.; Hoffmeister, Robert J.

2018-01-01

Academic English is an essential literacy skill area for success in post-secondary education and in many work environments. Despite its importance, academic English is understudied with deaf and hard of hearing (DHH) students. Nascent research in this area suggests that academic English, alongside American Sign Language (ASL) fluency, may play an…

Extraordinarily soft, medium-hard and hard Indian wheat varieties: Composition, protein profile, dough and baking properties.

PubMed

Katyal, Mehak; Singh, Narpinder; Virdi, Amardeep Singh; Kaur, Amritpal; Chopra, Nidhi; Ahlawat, Arvind Kumar; Singh, Anju Mahendru

2017-10-01

Hard wheat (HW), medium-hard wheat (MHW) and extraordinarily soft wheat (Ex-SW) varieties with grain hardness index (GHI) of 83 to 95, 72 to 80, 17 to 29 were evaluated for pasting, protein molecular weight (MW) distribution, dough rheology and baking properties. Flours from varieties with higher GHI had more protein content, ash content and paste viscosities. Ex-SW had more glutenins proportion as compared to HW and MHW. Flours from Ex-SW varieties showed lower NaSRC, WA and mixographic parameters as compared to HW and MHW. Dough from flours milled from Ex-SW had higher Intermolecular-β-sheets (IM-β-sheets) than those from MHW and HW. Muffins volume increased with decrease in GHI, Ex-SW varieties had more muffin volume and less air space. The accumulation of polypeptides (PPs) varied significantly in different varieties. Ex-SW variety (QBP12-10) showed accumulation of 98, 90, 81 and 79kDa PPs, which was unique and was different from other varieties. Copyright © 2017 Elsevier Ltd. All rights reserved.

Long-term hot-hardness characteristics of five through-hardened bearing steels

NASA Technical Reports Server (NTRS)

Anderson, N. E.

1978-01-01

Five vacuum-melted bearing steels tempered to various room temperature hardnesses: AISI 52100 and the tool steels AISI M-1, AISI M-50, Halmo, and WB-49 were studied. Hardness measurements were taken on AISI 52100 at room temperature and at elevated temperatures after soaking it at temperatures to 478 K (400 F) for as long as 1000 hours. Hardness measurements were also taken on the tool steels after soaking them at temperatures to 700 K (800 F) for as long at 1000 hours. None of the tool steel tempered during soaking and AISI 52100 did not temper when soaked at 366 K (200 F) for 1000 hours. However, AISI 52100 that was initially hardened to room temperature hardness of 62.5 or 64.5 lost hardness during the first 500 hours of the 1000-hour soak tests at temperatures greater than 394 K (250 F), but it maintained its hardness during the final 500 hours of soaking. Similarly, AISI 52100 initially hardened to room temperature hardness of 60.5 lost hardness during the first 500 hours of the 1000-hour soaking at temperatures greater than 422 K (300 F), but it maintained its hardness during the final 500 hours of soaking.

Short-term hot-hardness characteristics of five case hardened steels

NASA Technical Reports Server (NTRS)

Anderson, N. E.; Zaretsky, E. V.

1975-01-01

Short-term hot-hardness studies were performed with carburized and hardened AISI 8620, CBS 1000, CBS 1000M, CBS 600, and Vasco X-2 steels. Case and core hardness measurements were made at temperatures from 294 to 811 K (70 to 1000 F). The data were compared with data for high-speed tool steels and AISI 52100. The materials tested can be ranked as follows in order of decreasing hot-hardness retention: (1) Vasco X-2; equivalent to through-hardened tool steels up to 644 K (700 F) above which Vasco X-2 is inferior; (2) CBS 1000, (3) CBS 1000M; (4) CBS 6000; better hardness retention at elevated temperatures than through-hardened AISI 52100; and (5) AISI 8620. For the carburized steels, the change in hardness with temperature of the case and core are similar for a given material. The short-term hot hardness of these materials can be predicted with + or - 1 point Rockwell C.

Aperiodic Mo/Si multilayers for hard x-rays

DOE PAGES

Pardini, Tom; Alameda, Jennifer; Platonov, Yuriy; ...

2016-08-04

In this work we have developed aperiodic Molybdenum/Silicon (Mo/Si) multilayers (MLs) to reflect 16.25 keV photons at a grazing angle of incidence of 0.6° ± 0.05°. To the best of our knowledge this is the first time this material system has been used to fabricate aperiodic MLs for hard x-rays. At these energies new hurdles arise. First of all a large number of bilayers is required to reach saturation. This poses a challenge from the manufacturing point of view, as thickness control of each ML period becomes paramount. The latter is not well defined a priori, due to the thicknessmore » of the interfacial silicide layers which has been observed to vary as a function of Mo and Si thickness. Additionally an amorphous-to-crystalline transition for Mo must be avoided in order maintain reasonably low roughness at the interfaces. This transition is well within the range of thicknesses pertinent to this study. Despite these difficulties our data demonstrates that we achieved reasonably flat ML response across the angular acceptance of ± 0.05°, with an experimentally confirmed average reflectivity of 28%. Such a ML prescription is well suited for applications in the field of hard x-ray imaging of highly diverging sources.« less

Leah Robson, Bridgette Puljiz and Zachary Johnson(back to camera) in the flight deck of NASA's 747 shuttle carrier during Take Your Children to Work Day

NASA Image and Video Library

2004-06-22

Leah Robson and Bridgette Puljiz of Tehachapi (seated) and Zachary Johnson of Palmdale (back to camera) look over the maze of dials and switches in the flight deck of NASA's modified Boeing 747 space shuttle carrier aircraft during Take Your Children to Work Day June 22 at NASA Dryden Flight Research Center.

Combined effect of smoking habits and occupational exposure to hard metal on total IgE antibodies.

PubMed

Shirakawa, T; Kusaka, Y; Morimoto, K

1992-06-01

A survey was made within a population of workers (n = 706) exposed to hard metal dust (an alloy including cobalt), an agent known to cause occupational allergy. Twenty-seven (4 percent) of 733 workers were eliminated from consideration in this study because of atopic status identified prior to starting work in the plant. Using a Phadebas PRIST, the subjects' total IgE levels were determined and related to their smoking and exposure status. Nonexposed male smokers (n = 135) had a higher geometric mean IgE level (39.7 IU/ml) than did nonexposed subjects who had never smoked (33.1 IU/ml; n = 99); those with a higher Brinkman index (greater than 300), a smoking index obtained by multiplying the number of cigarettes per day by the duration of smoking in years, had significantly (p less than 0.05) decreased IgE levels. Although ex-smokers (n = 72) had a higher geometric mean IgE level (73.3 IU/ml) than did those who had never smoked, their serum IgE level declined with age since the time they quit smoking, regardless of their hard metal exposure status. Hard metal (cobalt) exposure may play a significant role as an adjuvant in the production of total IgE. A multivariate analysis demonstrated that hard metal exposure and a smoking habit together arithmetically (p less than 0.05) increased total IgE levels. These two factors may be preventable risk factors for occupational allergy in hard metal workers.

Steps to strengthen ethics in organizations: research findings, ethics placebos, and what works.

PubMed

Pope, Kenneth S

2015-01-01

Research shows that many organizations overlook needs and opportunities to strengthen ethics. Barriers can make it hard to see the need for stronger ethics and even harder to take effective action. These barriers include the organization's misleading use of language, misuse of an ethics code, culture of silence, strategies of justification, institutional betrayal, and ethical fallacies. Ethics placebos tend to take the place of steps to see, solve, and prevent problems. This article reviews relevant research and specific steps that create change.

Is there a hard-to-reach audience?

PubMed Central

Freimuth, V S; Mettger, W

1990-01-01

The "hard-to-reach" label has been applied to many different audiences. Persons who have a low socioeconomic status (SES), members of ethnic minorities, and persons who have a low level of literacy often are tagged as "hard-to-reach." The authors identify reasons why these groups have been labelled "hard-to-reach," discuss preconceptions associated with the "hard-to-reach" label, propose alternative conceptualizations of these audiences, and present implications of such conceptualizations for health communication campaigns. Pejorative labels and preconceptions about various groups may lead to depicting these audiences as powerless, apathetic, and isolated. The authors discuss alternative conceptualizations, which highlight the strengths of different audience segments and encourage innovative approaches to the communication process. These alternative conceptualizations emphasize interactive communication, a view of society in which individuals are seen as members of equivalent--albeit different--cultures, and a shift of responsibility for health problems from individuals to social systems. Recommendations for incorporating these alternative concepts into health campaigns include formative research techniques that create a dialogue among participants, more sophisticated segmentation techniques to capture audience diversity, and new roles for mass media that are more interactive and responsive to individual needs. PMID:2113680

Parameter meta-optimization of metaheuristics of solving specific NP-hard facility location problem

NASA Astrophysics Data System (ADS)

Skakov, E. S.; Malysh, V. N.

2018-03-01

The aim of the work is to create an evolutionary method for optimizing the values of the control parameters of metaheuristics of solving the NP-hard facility location problem. A system analysis of the tuning process of optimization algorithms parameters is carried out. The problem of finding the parameters of a metaheuristic algorithm is formulated as a meta-optimization problem. Evolutionary metaheuristic has been chosen to perform the task of meta-optimization. Thus, the approach proposed in this work can be called “meta-metaheuristic”. Computational experiment proving the effectiveness of the procedure of tuning the control parameters of metaheuristics has been performed.

Eddie Patterson enjoyed "flying" a C-17 simulator during Take Your Children to Work Day June 22 while Dryden engineer Ken Norlin and other students look on

NASA Image and Video Library

2004-06-22

Eddie Patterson, a fourth-grade student at Tehachapi's Tompkins Elementary School, enjoyed "flying" a C-17 multi-engine aircraft simulator during Take Your Children to Work Day June 22 at NASA Dryden Flight Research Center while NASA Dryden engineer Ken Norlin and other students look on.

Even Geniuses Work Hard

ERIC Educational Resources Information Center

Dweck, Carol S.

2010-01-01

In her well-known research, Carol Dweck has documented how individuals' attitudes about intelligence affect their behavior and achievement. People with a fixed mindset, she writes, believe that intelligence is inborn and unchangeable, whereas those with a growth mindset believe that intelligence can grow through practice and effort. In this…

Development of double-sided silicon strip detectors for solar hard x-ray observation

NASA Astrophysics Data System (ADS)

Saito, Shinya; Ishikawa, Shin-Nosuke; Watanabe, Shin; Odaka, Hirokazu; Sugimoto, Soichiro; Fukuyama, Taro; Kokubun, Motohide; Takahashi, Tadayuki; Terada, Yukikatsu; Tajima, Hiroyasu; Tanaka, Takaaki; Krucker, Säm; Christe, Steven; McBride, Steve; Glesener, Lindsay

2010-07-01

The Focusing Optics X-ray Solar Imager (FOXSI) is a rocket experiment scheduled for January 2011 launch. FOXSI observes 5 - 15 keV hard X-ray emission from quiet-region solar flares in order to study the acceleration process of electrons and the mechanism of coronal heating. For observing faint hard X-ray emission, FOXSI uses focusing optics for the first time in solar hard X-ray observation, and attains 100 times higher sensitivity than RHESSI, which is the present solar hard X-ray observing satellite. Now our group is working on developments of both Double-sided Silicon Strip Detector (DSSD) and read-out analog ASIC "VATA451" used for FOXSI. Our DSSD has a very fine strip pitch of 75 μm, which has sufficient position resolution for FOXSI mirrors with angular resolution (FWHM) of 12 arcseconds. DSSD also has high spectral resolution and efficiency in the FOXSI's energy range of 5 - 15 keV, when it is read out by our 64-channel analog ASIC. In advance of the FOXSI launch, we have established and tested a setup of 75 μm pitch DSSD bonded with "VATA451" ASICs. We successfully read out from almost all the channels of the detector, and proved ability to make a shadow image of tungsten plate. We also confirmed that our DSSD has energy resolution (FWHM) of 0.5 keV, lower threshold of 5 keV, and position resolution less than 63 μm. These performance satisfy FOXSI's requirements.

Hard Photodisintegration of 3He

NASA Astrophysics Data System (ADS)

Granados, Carlos

2011-02-01

Large angle photodisintegration of two nucleons from the 3He nucleus is studied within the framework of the hard rescattering model (HRM). In the HRM the incoming photon is absorbed by one nucleon's valence quark that then undergoes a hard rescattering reaction with a valence quark from the second nucleon producing two nucleons emerging at large transverse momentum . Parameter free cross sections for pp and pn break up channels are calculated through the input of experimental cross sections on pp and pn elastic scattering. The calculated cross section for pp breakup and its predicted energy dependency are in good agreement with recent experimental data. Predictions on spectator momentum distributions and helicity transfer are also presented.

Future Hard X-ray and Gamma-Ray Missions

NASA Astrophysics Data System (ADS)

Krawczynski, Henric; Physics of the Cosmos (PCOS) Gamma Ray Science Interest Group (GammaSIG) Team

2017-01-01

With four major NASA and ESA hard X-ray and gamma-ray missions in orbit (Swift, NuSTAR, INTEGRAL, and Fermi) hard X-ray and gamma-ray astronomy is making major contributions to our understanding of the cosmos. In this talk, I will summarize the current and upcoming activities of the Physics of the Cosmos Gamma Ray Science Interest Group and highlight a few of the future hard X-ray and gamma-ray mission discussed by the community. HK thanks NASA for the support through the awards NNX14AD19G and NNX16AC42G and for PCOS travel support.

Rolling contact fatigue of low hardness steel for slewing ring application

NASA Astrophysics Data System (ADS)

Knuth, Jason A.

This thesis discusses the rolling contact fatigue of steel utilized in anti-friction bearings, also referred to as slewing bearings. These slewing bearings are utilized in cranes, excavators, wind turbines and other similar applications. Five materials composed of two different material types were tested. The two material types were high carbon steel and medium carbon alloy steel. The test specimens were processed from forged rolled rings. Two machines were evaluated a ZF-RCF and 3-Ball test machine. The evaluation was to determine which machine can best simulate the application in which the slewing bearing is utilized. Initially, each specimen will be pretested to determine the appropriate testing direction from within the forged rolled rings. Pretesting is needed in order to establish consistent failure modes between samples. The primary goal of the test is to understand the life differences and failure modes between high carbon steel and medium carbon alloy steel. The high carbon steel ring was cut into two sections, one of which was stress relieved and the other was quenched and tempered. The medium carbon alloy steel was cut into three sections, all of which were quenched and tempered to different hardness levels. The test program was dynamically adjusted based upon the previous sample's life and load. An S-N curve was then established from the 5 materials tested at two target loads. The samples were run until the first sign of a crack was detected by an eddy current. At the completion of the rolling contact test, select sample's microstructure was evaluated for crack initiation location. The selected samples were divided into four groups which represent different maximum shear stress levels. These samples displayed indications of material deformation in which the high carbon steel experienced an increased amount of cold work when compared to medium carbon alloy steel. The life of the high carbon steel was nearly equivalent to the expected life of the medium

Assembly of hard spheres in a cylinder: a computational and experimental study.

PubMed

Fu, Lin; Bian, Ce; Shields, C Wyatt; Cruz, Daniela F; López, Gabriel P; Charbonneau, Patrick

2017-05-14

Hard spheres are an important benchmark of our understanding of natural and synthetic systems. In this work, colloidal experiments and Monte Carlo simulations examine the equilibrium and out-of-equilibrium assembly of hard spheres of diameter σ within cylinders of diameter σ≤D≤ 2.82σ. Although phase transitions formally do not exist in such systems, marked structural crossovers can nonetheless be observed. Over this range of D, we find in simulations that structural crossovers echo the structural changes in the sequence of densest packings. We also observe that the out-of-equilibrium self-assembly depends on the compression rate. Slow compression approximates equilibrium results, while fast compression can skip intermediate structures. Crossovers for which no continuous line-slip exists are found to be dynamically unfavorable, which is the main source of this difference. Results from colloidal sedimentation experiments at low diffusion rate are found to be consistent with the results of fast compressions, as long as appropriate boundary conditions are used.

Ridge regression for predicting elastic moduli and hardness of calcium aluminosilicate glasses

NASA Astrophysics Data System (ADS)

Deng, Yifan; Zeng, Huidan; Jiang, Yejia; Chen, Guorong; Chen, Jianding; Sun, Luyi

2018-03-01

It is of great significance to design glasses with satisfactory mechanical properties predictively through modeling. Among various modeling methods, data-driven modeling is such a reliable approach that can dramatically shorten research duration, cut research cost and accelerate the development of glass materials. In this work, the ridge regression (RR) analysis was used to construct regression models for predicting the compositional dependence of CaO-Al2O3-SiO2 glass elastic moduli (Shear, Bulk, and Young’s moduli) and hardness based on the ternary diagram of the compositions. The property prediction over a large glass composition space was accomplished with known experimental data of various compositions in the literature, and the simulated results are in good agreement with the measured ones. This regression model can serve as a facile and effective tool for studying the relationship between the compositions and the property, enabling high-efficient design of glasses to meet the requirements for specific elasticity and hardness.

Constraining axion-like-particles with hard X-ray emission from magnetars

NASA Astrophysics Data System (ADS)

Fortin, Jean-François; Sinha, Kuver

2018-06-01

Axion-like particles (ALPs) produced in the core of a magnetar will convert to photons in the magnetosphere, leading to possible signatures in the hard X-ray band. We perform a detailed calculation of the ALP-to-photon conversion probability in the magnetosphere, recasting the coupled differential equations that describe ALP-photon propagation into a form that is efficient for large scale numerical scans. We show the dependence of the conversion probability on the ALP energy, mass, ALP-photon coupling, magnetar radius, surface magnetic field, and the angle between the magnetic field and direction of propagation. Along the way, we develop an analytic formalism to perform similar calculations in more general n-state oscillation systems. Assuming ALP emission rates from the core that are just subdominant to neutrino emission, we calculate the resulting constraints on the ALP mass versus ALP-photon coupling space, taking SGR 1806-20 as an example. In particular, we take benchmark values for the magnetar radius and core temperature, and constrain the ALP parameter space by the requirement that the luminosity from ALP-to-photon conversion should not exceed the total observed luminosity from the magnetar. The resulting constraints are competitive with constraints from helioscope experiments in the relevant part of ALP parameter space.

Experimental study on internal cooling system in hard turning of HCWCI using CBN tools

NASA Astrophysics Data System (ADS)

Ravi, A. M.; Murigendrappa, S. M.

2018-04-01

In recent times, hard turning became most emerging technique in manufacturing processes, especially to cut high hard materials like high chrome white cast iron (HCWCI). Use of Cubic boron nitride (CBN), pCBN and Carbide tools are most appropriate to shear the metals but are uneconomical. Since hard turning carried out in dry condition, lowering the tool wear by minimizing tool temperature is the only solution. Study reveals, no effective cooling systems are available so for in order to enhance the tool life of the cutting tools and to improve machinability characteristics. The detrimental effect of cutting parameters on cutting temperature is generally controlled by proper selections. The objective of this paper is to develop a new cooling system to control tool tip temperature, thereby minimizing the cutting forces and the tool wear rates. The materials chosen for this work was HCWCI and cutting tools are CBN inserts. Intricate cavities were made on the periphery of the tool holder for easy flow of cold water. Taguchi techniques were adopted to carry out the experimentations. The experimental results confirm considerable reduction in the cutting forces and tool wear rates.

Comparison of medical students' learning approaches between electronic and hard copy team-based learning.

PubMed

Sharaf, Fawzy; Alnohair, Sultan

2017-01-01

To compare the students' perception of team-based learning (TBL): The paper (hard copy) compared with the e-copy (electronic copy) in the family medicine course of the fifth year medical students, Qassim University College of Medicine. A cross-sectional study was conducted during the family medicine course in 2015-2016 to compare the hard copy and the e-copy TBL sessions. We used Google drive to distribute, collect and analyze the questionnaire. The results of the e-copy TBL are shown and displayed directly with each session to the students, which was not the same as practiced with hard copy. We used also SPSS (version 17 for Windows) for more statistical analysis. The total number of respondents of students in each was 96; a phase of TBL phase 1 (hard copy) and phase 2 (e-copy). Male were 64 (66.7%) and females 32 (33.3%). The first three knowledge questions showed no difference between the mean score between paper and e-copy TBL, but of the perception questions showed a significant difference between the paper and e-copy TBL. The results of the survey showed that the students prefer e-copy TBL as a course format, as it was an attraction for most of the students and making them even more successful in the key exam and e-copy TBL develop the skills needed to work productively in task-groups.

When Work Takes Flight: Research Results from the EMERGENCE Project. IES Report.

ERIC Educational Resources Information Center

Huws, U., Ed.

The EMERGENCE project reviewed literature on eWork characterization, extent, and distribution and dynamics of its development in 15 European Union (EU) countries and 3 newly associated states (NAS). It identified 12 factors that influenced international diffusion of eWork. Employer survey results showed individual forms of eWork were outweighed in…

Fault-Tolerant, Radiation-Hard DSP

NASA Technical Reports Server (NTRS)

Czajkowski, David

2011-01-01

Commercial digital signal processors (DSPs) for use in high-speed satellite computers are challenged by the damaging effects of space radiation, mainly single event upsets (SEUs) and single event functional interrupts (SEFIs). Innovations have been developed for mitigating the effects of SEUs and SEFIs, enabling the use of very-highspeed commercial DSPs with improved SEU tolerances. Time-triple modular redundancy (TTMR) is a method of applying traditional triple modular redundancy on a single processor, exploiting the VLIW (very long instruction word) class of parallel processors. TTMR improves SEU rates substantially. SEFIs are solved by a SEFI-hardened core circuit, external to the microprocessor. It monitors the health of the processor, and if a SEFI occurs, forces the processor to return to performance through a series of escalating events. TTMR and hardened-core solutions were developed for both DSPs and reconfigurable field-programmable gate arrays (FPGAs). This includes advancement of TTMR algorithms for DSPs and reconfigurable FPGAs, plus a rad-hard, hardened-core integrated circuit that services both the DSP and FPGA. Additionally, a combined DSP and FPGA board architecture was fully developed into a rad-hard engineering product. This technology enables use of commercial off-the-shelf (COTS) DSPs in computers for satellite and other space applications, allowing rapid deployment at a much lower cost. Traditional rad-hard space computers are very expensive and typically have long lead times. These computers are either based on traditional rad-hard processors, which have extremely low computational performance, or triple modular redundant (TMR) FPGA arrays, which suffer from power and complexity issues. Even more frustrating is that the TMR arrays of FPGAs require a fixed, external rad-hard voting element, thereby causing them to lose much of their reconfiguration capability and in some cases significant speed reduction. The benefits of COTS high

Scaled Particle Theory for Multicomponent Hard Sphere Fluids Confined in Random Porous Media.

PubMed

Chen, W; Zhao, S L; Holovko, M; Chen, X S; Dong, W

2016-06-23

The formulation of scaled particle theory (SPT) is presented for a quite general model of fluids confined in a random porous media, i.e., a multicomponent hard sphere (HS) fluid in a multicomponent hard sphere or a multicomponent overlapping hard sphere (OHS) matrix. The analytical expressions for pressure, Helmholtz free energy, and chemical potential are derived. The thermodynamic consistency of the proposed theory is established. Moreover, we show that there is an isomorphism between the SPT for a multicomponent system and that for a one-component system. Results from grand canonical ensemble Monte Carlo simulations are also presented for a binary HS mixture in a one-component HS or a one-component OHS matrix. The accuracy of various variants derived from the basic SPT formulation is appraised against the simulation results. Scaled particle theory, initially formulated for a bulk HS fluid, has not only provided an analytical tool for calculating thermodynamic properties of HS fluid but also helped to gain very useful insight for elaborating other theoretical approaches such as the fundamental measure theory (FMT). We expect that the general SPT for multicomponent systems developed in this work can contribute to the study of confined fluids in a similar way.

Extremely hard amorphous-crystalline hybrid steel surface produced by deformation induced cementite amorphization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Wei; Meng, Yifei; Zhang, Xie

Amorphous and nanograined (NG) steels are two categories of strong steels. However, over the past decade, their application has been hindered by their limited plasticity, the addition of expensive alloying elements, and processing challenges associated with producing bulk materials. Here in this work, we report that the surface of a carburized Fe-Mn-Si martensitic steel with extremely low elemental alloying additions can be economically fabricated into an amorphous-nanocrystalline hybrid structure. Atom probe tomography and nanobeam diffraction of a hard turned steel surface together with molecular dynamics (MD) simulations reveal that the original cementite surface structure experiences a size-dependent amorphization and phasemore » transformation during heavy plastic deformation. MD simulations further show that the martensite-cementite interface serves as a nucleation site for cementite amorphization, and that cementite can become disordered if further strained when the cementite particles are relatively small. These graded structures exhibit a surface hardness of ~16.2 GPa, which exceeds the value of ~8.8 GPa for the original nanocrystalline martensitic steel and most nanocrystalline steels reported before. Finally, this practical and cost-efficient approach for producing a hard surface with retained bulk ductility and toughness can provide expanded opportunities for producing an amorphous-crystalline hybrid structure in steels and other alloy systems.« less

Extremely hard amorphous-crystalline hybrid steel surface produced by deformation induced cementite amorphization

DOE PAGES

Guo, Wei; Meng, Yifei; Zhang, Xie; ...

2018-04-11

Amorphous and nanograined (NG) steels are two categories of strong steels. However, over the past decade, their application has been hindered by their limited plasticity, the addition of expensive alloying elements, and processing challenges associated with producing bulk materials. Here in this work, we report that the surface of a carburized Fe-Mn-Si martensitic steel with extremely low elemental alloying additions can be economically fabricated into an amorphous-nanocrystalline hybrid structure. Atom probe tomography and nanobeam diffraction of a hard turned steel surface together with molecular dynamics (MD) simulations reveal that the original cementite surface structure experiences a size-dependent amorphization and phasemore » transformation during heavy plastic deformation. MD simulations further show that the martensite-cementite interface serves as a nucleation site for cementite amorphization, and that cementite can become disordered if further strained when the cementite particles are relatively small. These graded structures exhibit a surface hardness of ~16.2 GPa, which exceeds the value of ~8.8 GPa for the original nanocrystalline martensitic steel and most nanocrystalline steels reported before. Finally, this practical and cost-efficient approach for producing a hard surface with retained bulk ductility and toughness can provide expanded opportunities for producing an amorphous-crystalline hybrid structure in steels and other alloy systems.« less

The Personal Touch: A Guide to Acquiring Power within a College

ERIC Educational Resources Information Center

Simplicio, Joseph

2010-01-01

There are two main avenues for acquiring power. The first is rooted in the job position. Being the boss means people have to listen to what you say, or pay the consequences. Unfortunately, becoming the boss can take years of hard work. There is also no guarantee that such hard work will be rewarded with promotions and career advancements. In…

Using Hysteretic Energy to Evaluate Damping Characteristics of Hard Coating on Titanium

DTIC Science & Technology

2013-03-21

Ivancic, Frank T. The Effect of a Hard Coating on the Damping and Fatigue Life of Titanium. Air Force Institute of Technology (AU), Wright-Patterson AFB... aluminum specimens to determine the effects of losses for different grip mechanisms, a suspected problem in previous work with this method. Peak...done in a vacuum, and the nature of the free-decay test also confines strain to relatively low values for coated specimens (< 1000 µε) (Reed 2007

Waste minimisation in a hard chromiun plating Small Medium Enterprise (SME).

PubMed

Viguri, J R; Andrés, A; Irabien, A

2002-01-01

The high potential of waste stream minimisation in the metal finishing sector justifies specific studies of Small and Medium Enterprises (SME). In this work, the minimisation options of the wastes generated in a hard chromium plating activity have been analysed. The study has been performed in a small job shop company, which works in batch mode with big pieces. A process flowsheet after connecting the unit operations and determining the process inputs (raw and secondary materials) and outputs (waste streams) has been carried out. The main properties, quantity and current management of the waste streams have been shown. The obvious lack of information has been identified and finally the waste minimisation options that could be adopted by the company have been recorded.

Hydration entropy change from the hard sphere model.

PubMed

Graziano, Giuseppe; Lee, Byungkook

2002-12-10

The gas to liquid transfer entropy change for a pure non-polar liquid can be calculated quite accurately using a hard sphere model that obeys the Carnahan-Starling equation of state. The same procedure fails to produce a reasonable value for hydrogen bonding liquids such as water, methanol and ethanol. However, the size of the molecules increases when the hydrogen bonds are turned off to produce the hard sphere system and the volume packing density rises. We show here that the hard sphere system that has this increased packing density reproduces the experimental transfer entropy values rather well. The gas to water transfer entropy values for small non-polar hydrocarbons is also not reproduced by a hard sphere model, whether one uses the normal (2.8 A diameter) or the increased (3.2 A) size for water. At least part of the reason that the hard sphere model with 2.8 A size water produces too small entropy change is that the size of water is too small for a system without hydrogen bonds. The reason that the 3.2 A model also produces too small entropy values is that this is an overly crowded system and that the free volume introduced in the system by the addition of a solute molecule produces too much of a relief to this crowding. A hard sphere model, in which the free volume increase is limited by requiring that the average surface-to-surface distance between the solute and water molecules is the same as that between the increased-size water molecules, does approximately reproduce the experimental hydration entropy values. Copyright 2002 Elsevier Science B.V.

Improving mathematics teaching and learning experiences for hard of hearing students with wireless technology-enhanced classrooms.

PubMed

Liu, Chen-Chung; Chou, Chien-Chia; Liu, Baw-Jhiune; Yang, Jui-Wen

2006-01-01

Hard of hearing students usually face more difficulties at school than other students. A classroom environment with wireless technology was implemented to explore whether wireless technology could enhance mathematics learning and teaching activities for a hearing teacher and her 7 hard of hearing students in a Taiwan junior high school. Experiments showed that the highly interactive communication through the wireless network increased student participation in learning activities. Students demonstrated more responses to the teacher and fewer distraction behaviors. Fewer mistakes were made in in-class course work because Tablet PCs provided students scaffolds. Students stated that the environment with wireless technology was desirable and said that they hoped to continue using the environment to learn mathematics.

Work Done by a Gaussian Impulse

ERIC Educational Resources Information Center

Foong, S. K.

2010-01-01

This paper was first motivated by the following question: "A pair of twins, R and S, each gives the "same" hard push on a block. R's block is on a rougher floor than S's. Who does more work?" It is shown that S will do more work on his block if there is no constraint on the distance over which the force is applied. On the other hand, if the…

Changing beliefs and behavior through experience-taking.

PubMed

Kaufman, Geoff F; Libby, Lisa K

2012-07-01

The present research introduces the concept of experience-taking-the imaginative process of spontaneously assuming the identity of a character in a narrative and simulating that character's thoughts, emotions, behaviors, goals, and traits as if they were one's own. Six studies investigated the degree to which particular psychological states and features of narratives cause individuals, without instruction, to engage in experience-taking and investigated how the merger between self and other that occurs during experience-taking produces changes in self-judgments, attitudes, and behavior that align with the character's. Results from Studies 1-3 showed that being in a reduced state of self-concept accessibility while reading a brief fictional work increased-and being in a heightened state of self-concept accessibility decreased-participants' levels of experience-taking and subsequent incorporation of a character's personality trait into their self-concepts. Study 4 revealed that a first-person narrative depicting an ingroup character elicited the highest levels of experience-taking and produced the greatest change in participants' behavior, compared with versions of the narrative written in 3rd-person voice and/or depicting an outgroup protagonist. The final 2 studies demonstrated that whereas revealing a character's outgroup membership as a homosexual or African American early in a narrative inhibited experience-taking, delaying the revelation of the character's outgroup identity until later in the story produced higher levels of experience-taking, lower levels of stereotype application in participants' evaluation of the character, and more favorable attitudes toward the character's group. The implications of these findings in relation to perspective-taking, self-other overlap, and prime-to-behavior effects are discussed. PsycINFO Database Record (c) 2012 APA, all rights reserved

Diversity, distribution of Puroindoline genes and their effect on kernel hardness in a diverse panel of Chinese wheat germplasm.

PubMed

Ma, Xiaoling; Sajjad, Muhammad; Wang, Jing; Yang, Wenlong; Sun, Jiazhu; Li, Xin; Zhang, Aimin; Liu, Dongcheng

2017-09-20

Kernel hardness, which has great influence on the end-use properties of common wheat, is mainly controlled by Puroindoline genes, Pina and Pinb. Using EcoTILLING platform, we herein investigated the allelic variations of Pina and Pinb genes and their association with the Single Kernel Characterization System (SKCS) hardness index in a diverse panel of wheat germplasm. The kernel hardness varied from 1.4 to 102.7, displaying a wide range of hardness index. In total, six Pina and nine Pinb alleles resulting in 15 genotypes were detected in 1787 accessions. The most common alleles are the wild type Pina-D1a (90.4%) and Pina-D1b (7.4%) for Pina, and Pinb-D1b (43.6%), Pinb-D1a (41.1%) and Pinb-D1p (12.8%) for Pinb. All the genotypes have hard type kernel hardness of SKCS index (>60.0), except the wild types of Pina and Pinb combination (Pina-D1a/Pinb-D1a). The most frequent genotypes in Chinese and foreign cultivars was Pina-D1a/Pinb-D1b (46.3 and 39.0%, respectively) and in Chinese landraces was Pina-D1a/Pinb-D1a (54.2%). The frequencies of hard type accessions are increasing from 35.5% in the region IV, to 40.6 and 61.4% in the regions III and II, and then to 77.0% in the region I, while those of soft type are accordingly decreasing along with the increase of latitude. Varieties released after 2000 in Beijing, Hebei, Shandong and Henan have higher average kernel hardness index than that released before 2000. The kernel hardness in a diverse panel of Chinese wheat germplasm revealed an increasing of kernel hardness generally along with the latitude across China. The wild type Pina-D1a and Pinb-D1a, and one Pinb mutant (Pinb-D1b) are the most common alleles of six Pina and nine Pinb alleles, and a new double null genotype (Pina-D1x/Pinb-D1ah) possessed relatively high SKCS hardness index. More hard type varieties were released in recent years with different prevalence of Pin-D1 combinations in different regions. This work would benefit the understanding of the selection

Ego Depletion Effects on Mathematics Performance in Primary School Students: Why Take the Hard Road?

ERIC Educational Resources Information Center

Price, Deborah Ann; Yates, Gregory C. R.

2010-01-01

Reduction in performance level following on from brief periods of self-control is referred to as ego depletion. This study aimed to investigate if a brief ego depletion experience would impact upon primary school students working through an online mathematics exercise involving 40 computational trials. Seventy-two students participated in the…

Mongoose: Creation of a Rad-Hard MIPS R3000

NASA Technical Reports Server (NTRS)

Lincoln, Dan; Smith, Brian

1993-01-01

This paper describes the development of a 32 Bit, full MIPS R3000 code-compatible Rad-Hard CPU, code named Mongoose. Mongoose progressed from contract award, through the design cycle, to operational silicon in 12 months to meet a space mission for NASA. The goal was the creation of a fully static device capable of operation to the maximum Mil-883 derated speed, worst-case post-rad exposure with full operational integrity. This included consideration of features for functional enhancements relating to mission compatibility and removal of commercial practices not supported by Rad-Hard technology. 'Mongoose' developed from an evolution of LSI Logic's MIPS-I embedded processor, LR33000, code named Cobra, to its Rad-Hard 'equivalent', Mongoose. The term 'equivalent' is used to infer that the core of the processor is functionally identical, allowing the same use and optimizations of the MIPS-I Instruction Set software tool suite for compilation, software program trace, etc. This activity was started in September of 1991 under a contract from NASA-Goddard Space Flight Center (GSFC)-Flight Data Systems. The approach affected a teaming of NASA-GSFC for program development, LSI Logic for system and ASIC design coupled with the Rad-Hard process technology, and Harris (GASD) for Rad-Hard microprocessor design expertise. The program culminated with the generation of Rad-Hard Mongoose prototypes one year later.

On the phase behavior of hard aspherical particles

NASA Astrophysics Data System (ADS)

Miller, William L.; Cacciuto, Angelo

2010-12-01

We use numerical simulations to understand how random deviations from the ideal spherical shape affect the ability of hard particles to form fcc crystalline structures. Using a system of hard spheres as a reference, we determine the fluid-solid coexistence pressures of both shape-polydisperse and monodisperse systems of aspherical hard particles. We find that when particles are sufficiently isotropic, the coexistence pressure can be predicted from a linear relation involving the product of two simple geometric parameters characterizing the asphericity of the particles. Finally, our results allow us to gain direct insight into the crystallizability limits of these systems by rationalizing empirical data obtained for analogous monodisperse systems.

Dendritic Growth of Hard-Sphere Crystals. Experiment 34

NASA Technical Reports Server (NTRS)

Russel, W. B.; Chaikin, P. M.; Zhu, Ji-Xiang; Meyer, W. V.; Rogers, R.

1998-01-01

Recent observations of the disorder-order transition for colloidal hard spheres under microgravity revealed dendritic crystallites roughly 1-2 mm in size for samples in the coexistence region of the phase diagram. Order-of-magnitude estimates rationalize the absence of large or dendritic crystals under normal gravity and their stability to annealing in microgravity. A linear stability analysis of the Ackerson and Schaetzel model for crystallization of hard spheres establishes the domain of instability for diffusion-limited growth at small supersaturations. The relationship between hard-sphere and molecular crystal growth is established and exploited to relate the predicted linear instability to the well-developed dendrites observed.

Steps to Strengthen Ethics in Organizations: Research Findings, Ethics Placebos, and What Works

PubMed Central

Pope, Kenneth S.

2015-01-01

Research shows that many organizations overlook needs and opportunities to strengthen ethics. Barriers can make it hard to see the need for stronger ethics and even harder to take effective action. These barriers include the organization’s misleading use of language, misuse of an ethics code, culture of silence, strategies of justification, institutional betrayal, and ethical fallacies. Ethics placebos tend to take the place of steps to see, solve, and prevent problems. This article reviews relevant research and specific steps that create change. PMID:25602131

Work Engagement, Performance, and Active Learning: The Role of Conscientiousness

ERIC Educational Resources Information Center

Bakker, Arnold B.; Demerouti, Evangelia; ten Brummelhuis, Lieke L.

2012-01-01

The present study examines whether the relationship between work engagement and job performance is moderated by the extent to which individuals are inclined to work hard, careful, and goal-oriented. On the basis of the literature, it was hypothesized that conscientiousness strengthens the relationship between work engagement and supervisor ratings…

New Hardness Results for Diophantine Approximation

NASA Astrophysics Data System (ADS)

Eisenbrand, Friedrich; Rothvoß, Thomas

We revisit simultaneous Diophantine approximation, a classical problem from the geometry of numbers which has many applications in algorithms and complexity. The input to the decision version of this problem consists of a rational vector α ∈ ℚ n , an error bound ɛ and a denominator bound N ∈ ℕ + . One has to decide whether there exists an integer, called the denominator Q with 1 ≤ Q ≤ N such that the distance of each number Q ·α i to its nearest integer is bounded by ɛ. Lagarias has shown that this problem is NP-complete and optimization versions have been shown to be hard to approximate within a factor n c/ loglogn for some constant c > 0. We strengthen the existing hardness results and show that the optimization problem of finding the smallest denominator Q ∈ ℕ + such that the distances of Q·α i to the nearest integer are bounded by ɛ is hard to approximate within a factor 2 n unless {textrm{P}} = NP.

Surgical lasers and hard dental tissue.

PubMed

Parker, S

2007-04-28

The cutting of dental hard tissue during restorative procedures presents considerable demands on the ability to selectively remove diseased carious tissue, obtain outline and retention form and maintain the integrity of supporting tooth tissue without structural weakening. In addition, the requirement to preserve healthy tissue and prevent further breakdown of the restoration places the choice of instrumentation and clinical technique as prime factors for the dental surgeon. The quest for an alternative treatment modality to the conventional dental turbine has been, essentially, patient-driven and has led to the development of various mechanical and chemical devices. The review of the literature has endorsed the beneficial effects of current laser machines. However utopian, there is additional evidence to support the development of ultra-short (nano- and femto-second) pulsed lasers that are stable in use and commercially viable, to deliver more efficient hard tissue ablation with less risk of collateral thermal damage. This paper explores the interaction of laser energy with dental hard tissues and bone and the integration of current laser wavelengths into restorative and surgical dentistry.

How to estimate hardness of crystals on a pocket calculator

NASA Astrophysics Data System (ADS)

Šimůnek, Antonín

2007-05-01

A generalization of the semiempirical microscopic model of hardness is presented and applied to currently studied borides, carbides, and nitrides of heavy transition metals. The hardness of OsB, OsC, OsN, PtN, RuC, RuB2 , ReB2 , OsB2 , IrN2 , PtN2 , and OsN2 crystals in various structural phases is predicted. It is found that none of the transition metal crystals is superhard, i.e., with hardness greater than 40GPa . The presented method provides materials researchers with a practical tool in the search for new hard materials.

Hard Break-Up of Two-Nucleons and QCD Dynamics of NN Interaction

NASA Astrophysics Data System (ADS)

Sargsian, Misak

2008-10-01

We discus recent developments in theory of high energy two-body break-up of few-nucleon systems. The characteristics of these reactions are such that the hard two-body quasielastic subprocess can be clearly separated from the accompanying soft subprocesses. We discuss in details the hard rescattering model (HRM) in which hard photodisintegration develops in two stages. At first, photon knocks-out an energetic quark which rescatters subsequently with a quark of the other nucleon. The latter provides a mechanism of sharing the initial high momentum of the photon between two outgoing nucleons. This final state hard rescattering can be expressed through the hard NN scattering amplitude. Within HRM we discuss hard break-up reactions involving D and 3He targets and demonstrate how these reactions are sensitive to the dynamics of hard pn and pp interaction. Another development of HRM is the prediction of new helicity selection mechanism for hard two-body reactions, which was apparently confirmed in the recent JLab experiment.

Friction and hardness of gold films deposited by ion plating and evaporation

NASA Technical Reports Server (NTRS)

Miyoshi, K.; Spalvins, T.; Buckley, D. H.

1983-01-01

Sliding friction experiments were conducted with ion-plated and vapor-deposited gold films on various substrates in contact with a 0.025-mm-radius spherical silicon carbide rider in mineral oil. Hardness measurements were also made to examine the hardness depth profile of the coated gold on the substrate. The results indicate that the hardness is influenced by the depth of the gold coating from the surface. The hardness increases with an increase in the depth. The hardness is also related to the composition gradient in the graded interface between the gold coating and the substrate. The graded interface exhibited the highest hardness resulting from an alloy hardening effect. The coefficient of friction is inversely related to the hardness, namely, the load carrying capacity of the surface. The greater the hardness that the metal surface possesses, the lower is the coefficient of friction. The graded interface exhibited the lowest coefficient of friction.

Imaging the hard/soft tissue interface.

PubMed

Bannerman, Alistair; Paxton, Jennifer Z; Grover, Liam M

2014-03-01

Interfaces between different tissues play an essential role in the biomechanics of native tissues and their recapitulation is now recognized as critical to function. As a consequence, imaging the hard/soft tissue interface has become increasingly important in the area of tissue engineering. Particularly as several biotechnology based products have made it onto the market or are close to human trials and an understanding of their function and development is essential. A range of imaging modalities have been developed that allow a wealth of information on the morphological and physical properties of samples to be obtained non-destructively in vivo or via destructive means. This review summarizes the use of a selection of imaging modalities on interfaces to date considering the strengths and weaknesses of each. We will also consider techniques which have not yet been utilized to their full potential or are likely to play a role in future work in the area.

Laboratory studies on the tribology of hard bearing hip prostheses: ceramic on ceramic and metal on metal.

PubMed

Vassiliou, K; Scholes, S C; Unsworth, A

2007-01-01

Total hip replacements offer relief to a great many patients every year around the world. With an expected service life of around 25 years on most devices, and with younger and younger patients undergoing this surgery, it is of great importance to understand the mechanisms of their function. Tribological testing of both conventional and hard bearing joint combinations have been conducted in many centres throughout the world, and, after being initially abandoned owing to premature failures, hard bearing combinations have been revisited as viable options for joint replacements. Improved design, manufacturing procedures, and material compositions have led to improved performance over first-generation designs in both metal-on-metal and ceramic-on-ceramic hip prostheses. This paper offers a review of the work conducted in an attempt to highlight the most important factors affecting joint performance and tribology of hard bearing combinations. The tribological performance of these joints is superior to that of conventional metal- or ceramic-on-polymer designs.

Effect of 1.0% Ni on high-temperature impression creep and hardness of recycled aluminium alloy with high Fe content

NASA Astrophysics Data System (ADS)

Faisal, M.; Mazni, Noor; Prasada Rao, A. K.

2018-03-01

Reported work focusses on the effect of 1.0% Ni addition on the microstructure, high- temperature impression creep and thereby the hardness of recycled Al-alloy containing >2wt% Fe, obtained from automotive scrap. Present studies have shown that the addition of 1.0% Ni have supress the formation of α-phase (Al5FeSi) by supressing the peritectic transformation of β-phase (Al8Fe2Si). Such suppression is found to improve the hardness and high-temperature impression creep of the recycled aluminium alloy.

Investigation of formalin influence over hard and soft biological tissues fluorescent spectra in vitro

NASA Astrophysics Data System (ADS)

Borisova, E.; Uzunov, Tz.; Vladimirov, B.; Avramov, L.

2007-05-01

In order to investigate the formalin influence over fluorescence properties of hard and soft biological tissues during conservation, emission spectra have been registered. Nitrogen laser at 337 nm and light-emitting diode with maximum at 405 nm have been used as excitation sources. For investigation of formalin influence over hard tissues, an experiment was made on teeth samples. Sound teeth were demineralized with a phosphoric acid for 10 seconds to obtain enamel structure near to the tooth lesion, and were fixed in formalin. Before and after teeth treatment spectra from the areas of interest were detected. There were not observed changes in the shape of the teeth spectra, related to the introduction of formalin fluorescence. Samples from mucosa of esophagus and stomach, where initially an ALA/Protoporphyrin IX diagnosis was applied, were used as soft tissue specimens. After fluorescent diagnosis in vivo biopsy samples were obtained from normal and cancerous areas and were conserved in formalin. Initially, spectrum observed has one autofluorescence maximum from the mucous tissue at 500-600 nm and secondary maxima from the protoporphyrin fluorescence at 635 nm and 720 nm, as well as pronounced minima at 540 and 575 nm related to hemoglobin absorption. After formalin conservation hemoglobin absorption was strongly reduced that increases mucous emission signal in green-yellow spectral region. Simultaneously the maxima at 635 nm and 720 nm were reduced. As conclusion we could say that formalin has negligible influence over fluorescence spectra of conserved hard tissues and has more pronounced influence over fluorescence spectra obtained in the case of soft tissue conservation, which has to be taking into account in measurements in vitro.

Investigating the effect of hardness cations on coagulation: The aspect of neutralisation through Al(III)-dissolved organic matter (DOM) binding.

PubMed

Zhou, Yuxuan; Yan, Mingquan; Liu, Ruiping; Wang, Dongsheng; Qu, Jiuhui

2017-05-15

Hardness cations are ubiquitous and abundant in source water, while the effect of hardness on the performance of coagulation for dissolved organic matter (DOM) removal in water treatment remains unclear due to the limitation of methods that can characterise the subtle interactions between DOM, coagulant and hardness cations. This work quantified the competition between coagulant Al 3+ and hardness cations to bind onto DOM using absorbance spectroscopy acquired at different Al 3+ concentrations in the absence and presence of Ca 2+ or Mg 2+ . The results indicate that, in the presence of either Mg 2+ or Ca 2+ , an increasing depression of the binding of Al 3+ -DOM could be observed in the differential spectra of DOM with the increasing of Mg 2+ or Ca 2+ at a level of 10, 100 and 1000 μM, with the observation being more significant at higher pH from 6.5 to 8.5. The results of zeta potentials of DOM indicate that the competition of hardness cations results in the negative DOM being less efficiently neutralised by Al 3+ . This study demonstrates that the removal of DOM by coagulation would significantly deteriorate with the presence of hardness cations, which would compete with coagulant Al 3+ to neutralise the unsaturated sites in DOM. Copyright © 2017 Elsevier Ltd. All rights reserved.