Sample records for takes maximum advantage

  1. TAKING SCIENTIFIC ADVANTAGE OF A DISASTROUS OIL SPILL

    EPA Science Inventory

    On 19 January 1996, the North Cape barge ran aground on Moonstone Beach in southern Rhode Island, releasing 828,000 gallons of refined oil. This opportunistic study was designed to take scientific advantage of the most severely affected seabird, the common loon (Gavia immer) . As...

  2. Taking Advantage of Student Engagement Results in Student Affairs

    ERIC Educational Resources Information Center

    Kinzie, Jillian; Hurtado, Sarah S.

    2017-01-01

    This chapter urges student affairs professionals committed to enhancing student success through data-informed decision making to take full advantage of opportunities to apply and use student engagement results.

  3. Neural Correlates of Traditional Chinese Medicine Induced Advantageous Risk-Taking Decision Making

    ERIC Educational Resources Information Center

    Lee, Tiffany M. Y.; Guo, Li-guo; Shi, Hong-zhi; Li, Yong-zhi; Luo, Yue-jia; Sung, Connie Y. Y.; Chan, Chetwyn C. H.; Lee, Tatia M. C.

    2009-01-01

    This fMRI study examined the neural correlates of the observed improvement in advantageous risk-taking behavior, as measured by the number of adjusted pumps in the Balloon Analogue Risk Task (BART), following a 60-day course of a Traditional Chinese Medicine (TCM) recipe, specifically designed to regulate impulsiveness in order to modulate…

  4. Student Perceptions of the Advantages and Disadvantages of Geologic Note-taking with iPads

    NASA Astrophysics Data System (ADS)

    Dohaney, J. A.; Kennedy, B.; Gravley, D. M.

    2015-12-01

    During fieldwork, students and professionals record information and hypotheses into their geologic notebook. In a pilot study, students on an upper-level volcanology field trip were given iPads, with an open-source geology note-taking application (GeoFieldBook) and volunteered to record notes at two sites (i.e., Tongariro Volcanic Complex and Orakei Korako) in New Zealand. A group of students (n=9) were interviewed several weeks after fieldwork to reflect on using this technology. We aimed to characterise their experiences, strategies and examine the perceived benefits and challenges of hardcopy and digital note-taking. Students reported having a diverse range of strategies when taking notes but the most common strategies mentioned were: a) looking for/describing the differences, b) supporting note-taking with sketches, c) writing everything down, and d) focusing first on structure, texture and then composition of an outcrop. Additionally, students said they that the strategies they used were context-dependent (i.e., bedrock mapping versus detailed outcrop descriptions). When using the iPad, students reported that they specifically used different strategies: varying the length of text (from more to less), increasing the number of sites described (i.e., preferring to describe sites in more spatial detail rather than summarising several features in close proximity), and taking advantage of the 'editability' of iPad notes (abandoning rigid, systematic approaches). Overall, the reported advantages to iPad note-taking included allowing the user to be more efficient, organised and using the GPS mapping function to help them make observations and interpretations in real-time. Students also reported a range of disadvantages, but focused predominantly on the inability to annotate/draw sketches with the iPad in the same manner as pen and paper methods. These differences likely encourage different overall approaches to note-taking and cognition in the field environment, and

  5. 5 CFR 792.207 - When does the child care subsidy program law become effective and how may agencies take advantage...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false When does the child care subsidy program law become effective and how may agencies take advantage of this law? 792.207 Section 792.207... When does the child care subsidy program law become effective and how may agencies take advantage of...

  6. Taking advantage of inclination variation in resonant remote-sensing satellite orbits

    NASA Astrophysics Data System (ADS)

    Gopinath, N. S.; Ravindrababu, T.; Rao, S. V.; Daniel, D. A.; Goel, P. S.

    2004-08-01

    The inclination of remote-sensing satellites, which are generally placed in sun-synchronous orbits, varies as a function of the nominal equatorial crossing local mean solar time selected for a given mission. The Indian Remote-Sensing satellites will have an inclination reduction of about 0.034° per year and for most of the satellites, the local time chosen was around 10:30 hours at descending node. In practice, the initial inclination is biased appropriately so that the expensive out-of-plane maneuvers could be taken up after few years of mission operations, depending on the deviations permitted in the local time for a given mission. However, the scenario differs when the mission objectives require an almost exact repeat orbit of 14 or 15 per day. In such a situation, the satellite orbit, which passes through a 14th or 15th order resonance, undergoes a nearly secular increase in orbit inclination. This paper presents a detailed analysis carried out for such an orbit, based on Cowell's approach. Long-term predictions have been carried out by considering all major forces that perturbs the satellite orbit. Observed behavior of orbit, based on the daily definitive orbit determination is also presented. The variation in inclination and the cause is clearly brought out. Further, it is demonstrated that the selection of longitude for nominal ground track pattern has an impact on the inclination variation. A proposal is made to take advantage of such expected inclination variation so that initial inclination bias can be chosen appropriately. Ground track longitude can be chosen to take advantage, subject to the mission coverage requirements. The paper contains the results of an exhaustive analysis of the actually observed orbit resonance. It is felt that the work has both theoretical and operational importance for remote-sensing missions.

  7. On Muthen's Maximum Likelihood for Two-Level Covariance Structure Models

    ERIC Educational Resources Information Center

    Yuan, Ke-Hai; Hayashi, Kentaro

    2005-01-01

    Data in social and behavioral sciences are often hierarchically organized. Special statistical procedures that take into account the dependence of such observations have been developed. Among procedures for 2-level covariance structure analysis, Muthen's maximum likelihood (MUML) has the advantage of easier computation and faster convergence. When…

  8. Performance advantages of maximum likelihood methods in PRBS-modulated time-of-flight electron energy loss spectroscopy

    NASA Astrophysics Data System (ADS)

    Yang, Zhongyu

    This thesis describes the design, experimental performance, and theoretical simulation of a novel time-of-flight analyzer that was integrated into a high resolution electron energy loss spectrometer (TOF-HREELS). First we examined the use of an interleaved comb chopper for chopping a continuous electron beam. Both static and dynamic behaviors were simulated theoretically and measured experimentally, with very good agreement. The finite penetration of the field beyond the plane of the chopper leads to non-ideal chopper response, which is characterized in terms of an "energy corruption" effect and a lead or lag in the time at which the beam responds to the chopper potential. Second we considered the recovery of spectra from pseudo-random binary sequence (PRBS) modulated TOF-HREELS data. The effects of the Poisson noise distribution and the non-ideal behavior of the "interleaved comb" chopper were simulated. We showed, for the first time, that maximum likelihood methods can be combined with PRBS modulation to achieve resolution enhancement, while properly accounting for the Poisson noise distribution and artifacts introduced by the chopper. Our results indicate that meV resolution, similar to that of modern high resolution electron energy loss spectrometers, can be achieved with a dramatic performance advantage over conventional, serial detection analyzers. To demonstrate the capabilities of the TOF-HREELS instrument, we made measurements on a highly oriented thin film polytetrafluoroethylene (PTFE) sample. We demonstrated that the TOF-HREELS can achieve a throughput advantage of a factor of 85 compared to the conventional HREELS instrument. Comparisons were made between the experimental results and theoretical simulations. We discuss various factors which affect inversion of PRBS modulated Time of Flight (TOF) data with the Lucy algorithm. Using simulations, we conclude that the convolution assumption was good under the conditions of our experiment. The chopper rise

  9. XB-70A during take-off

    NASA Image and Video Library

    1965-08-17

    Viewed from the front the #1 XB-70A (62-0001) is shown climbing out during take-off. Most flights were scheduled during the morning hours to take advantage of the cooler ambient air temperatures for improved propulsion efficiencies. The wing tips are extended straight out to provide a maximum lifting wing surface. The XB-70A, capable of flying three times the speed of sound, was the world's largest experimental aircraft in the 1960s. Two XB-70A aircraft were built. Ship #1 was flown by NASA in a high speed flight research program.

  10. Maximum aposteriori joint source/channel coding

    NASA Technical Reports Server (NTRS)

    Sayood, Khalid; Gibson, Jerry D.

    1991-01-01

    A maximum aposteriori probability (MAP) approach to joint source/channel coder design is presented in this paper. This method attempts to explore a technique for designing joint source/channel codes, rather than ways of distributing bits between source coders and channel coders. For a nonideal source coder, MAP arguments are used to design a decoder which takes advantage of redundancy in the source coder output to perform error correction. Once the decoder is obtained, it is analyzed with the purpose of obtaining 'desirable properties' of the channel input sequence for improving overall system performance. Finally, an encoder design which incorporates these properties is proposed.

  11. Getting their appetite back. In need of capital, not-for-profit hospitals take advantage of dropping interest rates.

    PubMed

    Evans, Melanie

    2011-10-31

    After steering clear of the municipal bond market this year, not-for-profit hospitals are being lured back by dropping interest rates. "We're taking advantage of the current market," says Jim Budzinski, left, executive vice president and chief financial officer of WellStar Health System. The Georgia provider's recent bond deal helped erase $4.2 million in interest costs.

  12. An ESS maximum principle for matrix games.

    PubMed

    Vincent, T L; Cressman, R

    2000-11-01

    Previous work has demonstrated that for games defined by differential or difference equations with a continuum of strategies, there exists a G-function, related to individual fitness, that must take on a maximum with respect to a virtual variable v whenever v is one of the vectors in the coalition of vectors which make up the evolutionarily stable strategy (ESS). This result, called the ESS maximum principle, is quite useful in determining candidates for an ESS. This principle is reformulated here, so that it may be conveniently applied to matrix games. In particular, we define a matrix game to be one in which fitness is expressed in terms of strategy frequencies and a matrix of expected payoffs. It is shown that the G-function in the matrix game setting must again take on a maximum value at all the strategies which make up the ESS coalition vector. The reformulated maximum principle is applicable to both bilinear and nonlinear matrix games. One advantage in employing this principle to solve the traditional bilinear matrix game is that the same G-function is used to find both pure and mixed strategy solutions by simply specifying an appropriate strategy space. Furthermore we show how the theory may be used to solve matrix games which are not in the usual bilinear form. We examine in detail two nonlinear matrix games: the game between relatives and the sex ratio game. In both of these games an ESS solution is determined. These examples not only illustrate the usefulness of this approach to finding solutions to an expanded class of matrix games, but aids in understanding the nature of the ESS as well.

  13. Maximum parsimony, substitution model, and probability phylogenetic trees.

    PubMed

    Weng, J F; Thomas, D A; Mareels, I

    2011-01-01

    The problem of inferring phylogenies (phylogenetic trees) is one of the main problems in computational biology. There are three main methods for inferring phylogenies-Maximum Parsimony (MP), Distance Matrix (DM) and Maximum Likelihood (ML), of which the MP method is the most well-studied and popular method. In the MP method the optimization criterion is the number of substitutions of the nucleotides computed by the differences in the investigated nucleotide sequences. However, the MP method is often criticized as it only counts the substitutions observable at the current time and all the unobservable substitutions that really occur in the evolutionary history are omitted. In order to take into account the unobservable substitutions, some substitution models have been established and they are now widely used in the DM and ML methods but these substitution models cannot be used within the classical MP method. Recently the authors proposed a probability representation model for phylogenetic trees and the reconstructed trees in this model are called probability phylogenetic trees. One of the advantages of the probability representation model is that it can include a substitution model to infer phylogenetic trees based on the MP principle. In this paper we explain how to use a substitution model in the reconstruction of probability phylogenetic trees and show the advantage of this approach with examples.

  14. Paving the road to maximum productivity.

    PubMed

    Holland, C

    1998-01-01

    "Job security" is an oxymoron in today's environment of downsizing, mergers, and acquisitions. Workers find themselves living by new rules in the workplace that they may not understand. How do we cope? It is the leader's charge to take advantage of this chaos and create conditions under which his or her people can understand the need for change and come together with a shared purpose to effect that change. The clinical laboratory at Arkansas Children's Hospital has taken advantage of this chaos to down-size and to redesign how the work gets done to pave the road to maximum productivity. After initial hourly cutbacks, the workers accepted the cold, hard fact that they would never get their old world back. They set goals to proactively shape their new world through reorganizing, flexing staff with workload, creating a rapid response laboratory, exploiting information technology, and outsourcing. Today the laboratory is a lean, productive machine that accepts change as a way of life. We have learned to adapt, trust, and support each other as we have journeyed together over the rough roads. We are looking forward to paving a new fork in the road to the future.

  15. Size and shape of Brain may be such as to take advantage of two Dimensions of Time

    NASA Astrophysics Data System (ADS)

    Kriske, Richard

    2014-03-01

    This author had previously Theorized that there are two non-commuting Dimensions of time. One is Clock Time and the other is Information Time (which we generally refer to as Information, like Spin Up or Spin Down). When time does not commute with another Dimension of Time, one takes the Clock Time at one point in space and the Information time is not known; that is different than if one takes the Information time at that point and the Clock time is not known--This is not explicitly about time but rather space. An example of this non-commutation is that if one knows the Spin at one point and the Time at one point of space then simultaneosly, one knows the Spin at another point of Space and the Time there (It is the same time), it is a restatement of the EPR paradox. As a matter of fact two Dimensions of Time would prove the EPR paradox. It is obvious from that argument that if one needed to take advantage of Information, then a fairly large space needs to be used, a large amount of Energy needs to be Generated and a symmetry needs to be established in Space-like the lobes of a Brain in order to detect the fact that the Tclock and Tinfo are not Commuting. This Non-Commuting deposits a large amount of Information simultaneously in that space, and synchronizes the time there.

  16. Airway bypass treatment of severe homogeneous emphysema: taking advantage of collateral ventilation.

    PubMed

    Choong, Cliff K; Cardoso, Paulo F G; Sybrecht, Gerhard W; Cooper, Joel D

    2009-05-01

    Airway bypass is being investigated as a new form of minimally invasive therapy for the treatment of homogeneous emphysema. It is a bronchoscopic catheter-based procedure that creates transbronchial extra-anatomic passages at the bronchial segmental level. The passages are expanded, supported with the expectation that the patency is maintained by paclitaxel drug-eluting airway bypass stents. The concept of airway bypass has been demonstrated in two separate experimental studies. These studies have shown that airway bypass takes advantage of collateral ventilation present in homogeneous emphysema to allow trapped gas to escape and reduce hyperinflation. It improves lung mechanics, expiratory flow, and volume. Airway bypass stent placements have been shown to be feasible and safe in both animal and human studies. Paclitaxel-eluting airway bypass stents were found to prolong stent patency and were adopted for clinical studies. A study evaluating the early results of the clinical application of airway bypass with paclitaxel-eluting stents found that airway bypass procedures reduced hyperinflation and improved pulmonary function and dyspnea in selected subjects who have severe emphysema. The duration of benefit appeared to correlate with the degree of pretreatment hyperinflation. These preliminary clinical results supported further evaluation of the procedure and led to the EASE Trial. The EASE Trial is a prospective, multicenter, randomized, double-blind, sham-controlled study. The trial aims to evaluate the safety and effectiveness of the airway bypass to improve pulmonary function and reduce dyspnea in homogeneous emphysema subjects who have severe hyperinflation. The trial is presently ongoing worldwide, though enrollment was completed.

  17. An annealed chaotic maximum neural network for bipartite subgraph problem.

    PubMed

    Wang, Jiahai; Tang, Zheng; Wang, Ronglong

    2004-04-01

    In this paper, based on maximum neural network, we propose a new parallel algorithm that can help the maximum neural network escape from local minima by including a transient chaotic neurodynamics for bipartite subgraph problem. The goal of the bipartite subgraph problem, which is an NP- complete problem, is to remove the minimum number of edges in a given graph such that the remaining graph is a bipartite graph. Lee et al. presented a parallel algorithm using the maximum neural model (winner-take-all neuron model) for this NP- complete problem. The maximum neural model always guarantees a valid solution and greatly reduces the search space without a burden on the parameter-tuning. However, the model has a tendency to converge to a local minimum easily because it is based on the steepest descent method. By adding a negative self-feedback to the maximum neural network, we proposed a new parallel algorithm that introduces richer and more flexible chaotic dynamics and can prevent the network from getting stuck at local minima. After the chaotic dynamics vanishes, the proposed algorithm is then fundamentally reined by the gradient descent dynamics and usually converges to a stable equilibrium point. The proposed algorithm has the advantages of both the maximum neural network and the chaotic neurodynamics. A large number of instances have been simulated to verify the proposed algorithm. The simulation results show that our algorithm finds the optimum or near-optimum solution for the bipartite subgraph problem superior to that of the best existing parallel algorithms.

  18. Innovating in the teaching of Chemical Equilibrium: Taking effective advantage of Information and Communication Technologies

    NASA Astrophysics Data System (ADS)

    Fonseca, Susana Cristina Morais da

    Chemical Equilibrium (CE) is a good example of the specific nature of chemistry. The understanding of this theme requires the conceptualization of macroscopic events, as well as explanations of sub microscopic nature, application of symbolic language and mathematics. CE is commonly identified as a topic suitable for the pedagogical use of Information and Communication Technologies (ICT). However, the growth in the roll of digital resources for the teaching of CE, that took place in the last decades, was not accompanied by a decrease in the signalling of students' difficulties and misconceptions in the subject. This fact, points out the relevance of clarifying the circumstances under which digital resources turn out to be useful in the teaching of CE and develop educative modules that take into account the findings and recommendations from the literature. This project aims to bring a contribution to take advantage form ICT potential in the teaching of CE. The objectives underlying the main purpose of the project were defined according to literature review, which crosses three fundamental dimensions (scientific, pedagogical and technological). The project also benefited from the previous experience of the group and the collaboration with an European project (CROSSNET). The level of abstraction necessary for the understanding of the scientific model is pointed out as the major source of difficulties in the learning of CE, while also referred as a privileged target for the intervention of ICT. In this context, we introduce the expression "facilitating abstraction" to summarize the idea of supporting students' abstract thinking process during the learning of formal concepts. This idea has gained importance throughout the project leading to the development of a pedagogical approach to facilitate abstraction in the learning of CE. Although based on the use of ICT, the main purpose wasn't to introduce new digital resources in the saturated field of CE. Instead, the

  19. Maximum entropy and equations of state for random cellular structures

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Rivier, N.

    Random, space-filling cellular structures (biological tissues, metallurgical grain aggregates, foams, etc.) are investigated. Maximum entropy inference under a few constraints yields structural equations of state, relating the size of cells to their topological shape. These relations are known empirically as Lewis's law in Botany, or Desch's relation in Metallurgy. Here, the functional form of the constraints is now known as a priori, and one takes advantage of this arbitrariness to increase the entropy further. The resulting structural equations of state are independent of priors, they are measurable experimentally and constitute therefore a direct test for the applicability of MaxEnt inferencemore » (given that the structure is in statistical equilibrium, a fact which can be tested by another simple relation (Aboav's law)). 23 refs., 2 figs., 1 tab.« less

  20. MAX 1991. The active sun: A plan for pursuing the study of the active sun at the time of the next maximum in solar activity, January 1985

    NASA Technical Reports Server (NTRS)

    Acton, L.

    1989-01-01

    The results of the discusions of a working group for the definition of a program for the forthcoming crest of solar activity, 1990 to 1993 are presented. The MAX '91 program described are intended to achieve important scientific goals within the context of the natural solar variability. The heart of the MAX '91 program is a series of campaigns oriented towards specific scientific problems, and taking place in the solar maximum period 1990 to 1993. These campaigns will take advantage of the load-carrying capability of the Space Shuttle to fly instruments with observational capabilities very different from those of the Solar Maximum Mission. Various combinations of instruments appropriate to the specific scientific problem of a given campaign would be flown on a Shuttle sortie mission.

  1. The pen is mightier than the keyboard: advantages of longhand over laptop note taking.

    PubMed

    Mueller, Pam A; Oppenheimer, Daniel M

    2014-06-01

    Taking notes on laptops rather than in longhand is increasingly common. Many researchers have suggested that laptop note taking is less effective than longhand note taking for learning. Prior studies have primarily focused on students' capacity for multitasking and distraction when using laptops. The present research suggests that even when laptops are used solely to take notes, they may still be impairing learning because their use results in shallower processing. In three studies, we found that students who took notes on laptops performed worse on conceptual questions than students who took notes longhand. We show that whereas taking more notes can be beneficial, laptop note takers' tendency to transcribe lectures verbatim rather than processing information and reframing it in their own words is detrimental to learning. © The Author(s) 2014.

  2. Maximum bandwidth snapshot channeled imaging polarimeter with polarization gratings

    NASA Astrophysics Data System (ADS)

    LaCasse, Charles F.; Redman, Brian J.; Kudenov, Michael W.; Craven, Julia M.

    2016-05-01

    Compact snapshot imaging polarimeters have been demonstrated in literature to provide Stokes parameter estimations for spatially varying scenes using polarization gratings. However, the demonstrated system does not employ aggressive modulation frequencies to take full advantage of the bandwidth available to the focal plane array. A snapshot imaging Stokes polarimeter is described and demonstrated through results. The simulation studies the challenges of using a maximum bandwidth configuration for a snapshot polarization grating based polarimeter, such as the fringe contrast attenuation that results from higher modulation frequencies. Similar simulation results are generated and compared for a microgrid polarimeter. Microgrid polarimeters are instruments where pixelated polarizers are superimposed onto a focal plan array, and this is another type of spatially modulated polarimeter, and the most common design uses a 2x2 super pixel of polarizers which maximally uses the available bandwidth of the focal plane array.

  3. A Hybrid Maximum Power Point Tracking Method for Automobile Exhaust Thermoelectric Generator

    NASA Astrophysics Data System (ADS)

    Quan, Rui; Zhou, Wei; Yang, Guangyou; Quan, Shuhai

    2017-05-01

    To make full use of the maximum output power of automobile exhaust thermoelectric generator (AETEG) based on Bi2Te3 thermoelectric modules (TEMs), taking into account the advantages and disadvantages of existing maximum power point tracking methods, and according to the output characteristics of TEMs, a hybrid maximum power point tracking method combining perturb and observe (P&O) algorithm, quadratic interpolation and constant voltage tracking method was put forward in this paper. Firstly, it searched the maximum power point with P&O algorithms and a quadratic interpolation method, then, it forced the AETEG to work at its maximum power point with constant voltage tracking. A synchronous buck converter and controller were implemented in the electric bus of the AETEG applied in a military sports utility vehicle, and the whole system was modeled and simulated with a MATLAB/Simulink environment. Simulation results demonstrate that the maximum output power of the AETEG based on the proposed hybrid method is increased by about 3.0% and 3.7% compared with that using only the P&O algorithm and the quadratic interpolation method, respectively. The shorter tracking time is only 1.4 s, which is reduced by half compared with that of the P&O algorithm and quadratic interpolation method, respectively. The experimental results demonstrate that the tracked maximum power is approximately equal to the real value using the proposed hybrid method,and it can preferentially deal with the voltage fluctuation of the AETEG with only P&O algorithm, and resolve the issue that its working point can barely be adjusted only with constant voltage tracking when the operation conditions change.

  4. Determining the number of chemical species in nuclear magnetic resonance data matrix by taking advantage of collinearity and noise.

    PubMed

    Wang, Wanping; Shao, Limin; Yuan, Bin; Zhang, Xu; Liu, Maili

    2018-08-31

    The number of chemical species is crucial in analyzing pulsed field gradient nuclear magnetic resonance spectral data. Any method to determine the number must handle the obstacles of collinearity and noise. Collinearity in pulsed field gradient NMR data poses a serious challenge to and fails many existing methods. A novel method is proposed by taking advantage of the two obstacles instead of eliminating them. In the proposed method, the determination is based on discriminating decay-profile-dominant eigenvectors from noise-dominant ones, and the discrimination is implemented with a novel low- and high-frequency energy ratio (LHFER). Its performance is validated with both simulated and experimental data. The method is mathematically rigorous, computationally efficient, and readily automated. It also has the potential to be applied to other types of data in which collinearity is fairly severe. Copyright © 2018 Elsevier B.V. All rights reserved.

  5. Taking advantage of ground data systems attributes to achieve quality results in testing software

    NASA Technical Reports Server (NTRS)

    Sigman, Clayton B.; Koslosky, John T.; Hageman, Barbara H.

    1994-01-01

    During the software development life cycle process, basic testing starts with the development team. At the end of the development process, an acceptance test is performed for the user to ensure that the deliverable is acceptable. Ideally, the delivery is an operational product with zero defects. However, the goal of zero defects is normally not achieved but is successful to various degrees. With the emphasis on building low cost ground support systems while maintaining a quality product, a key element in the test process is simulator capability. This paper reviews the Transportable Payload Operations Control Center (TPOCC) Advanced Spacecraft Simulator (TASS) test tool that is used in the acceptance test process for unmanned satellite operations control centers. The TASS is designed to support the development, test and operational environments of the Goddard Space Flight Center (GSFC) operations control centers. The TASS uses the same basic architecture as the operations control center. This architecture is characterized by its use of distributed processing, industry standards, commercial off-the-shelf (COTS) hardware and software components, and reusable software. The TASS uses much of the same TPOCC architecture and reusable software that the operations control center developer uses. The TASS also makes use of reusable simulator software in the mission specific versions of the TASS. Very little new software needs to be developed, mainly mission specific telemetry communication and command processing software. By taking advantage of the ground data system attributes, successful software reuse for operational systems provides the opportunity to extend the reuse concept into the test area. Consistency in test approach is a major step in achieving quality results.

  6. Chimpanzees do not take advantage of very low cost opportunities to deliver food to unrelated group members.

    PubMed

    Vonk, Jennifer; Brosnan, Sarah F; Silk, Joan B; Henrich, Joseph; Richardson, Amanda S; Lambeth, Susan P; Schapiro, Steven J; Povinelli, Daniel J

    2008-05-01

    We conducted experiments on two populations of chimpanzees, Pan troglodytes , to determine whether they would take advantage of opportunities to provide food rewards to familiar group members at little cost to themselves. In both of the experiments described here, chimpanzees were able to deliver identical rewards to themselves and to other members of their social groups. We compared the chimpanzees' behaviour when they were paired with another chimpanzee and when they were alone. If chimpanzees are motivated to provide benefits to others, they are expected to consistently deliver rewards to others and to distinguish between the partner-present and partner-absent conditions. Results from both experiments indicate that our subjects were largely indifferent to the benefits they could provide to others. They were less likely to provide rewards to potential recipients as the experiment progressed, and all but one of the 18 subjects were as likely to deliver rewards to an empty enclosure as to an enclosure housing another chimpanzee. These results, in conjunction with similar results obtained in previous experiments, suggest that chimpanzees are not motivated by prosocial sentiments to provide food rewards to other group members.

  7. Chimpanzees do not take advantage of very low cost opportunities to deliver food to unrelated group members

    PubMed Central

    VONK, JENNIFER; BROSNAN, SARAH F.; SILK, JOAN B.; HENRICH, JOSEPH; RICHARDSON, AMANDA S.; LAMBETH, SUSAN P.; SCHAPIRO, STEVEN J.; POVINELLI, DANIEL J.

    2015-01-01

    We conducted experiments on two populations of chimpanzees, Pan troglodytes, to determine whether they would take advantage of opportunities to provide food rewards to familiar group members at little cost to themselves. In both of the experiments described here, chimpanzees were able to deliver identical rewards to themselves and to other members of their social groups. We compared the chimpanzees’ behaviour when they were paired with another chimpanzee and when they were alone. If chimpanzees are motivated to provide benefits to others, they are expected to consistently deliver rewards to others and to distinguish between the partner-present and partner-absent conditions. Results from both experiments indicate that our subjects were largely indifferent to the benefits they could provide to others. They were less likely to provide rewards to potential recipients as the experiment progressed, and all but one of the 18 subjects were as likely to deliver rewards to an empty enclosure as to an enclosure housing another chimpanzee. These results, in conjunction with similar results obtained in previous experiments, suggest that chimpanzees are not motivated by prosocial sentiments to provide food rewards to other group members. PMID:27011388

  8. Taking advantage of an unerupted third molar: a case report.

    PubMed

    Pereira, Igor Figueiredo; Santiago, Fernando Zander Mucci; Sette-Dias, Augusto Cesar; Noronha, Vladimir Reimar Augusto de Souza

    2017-01-01

    Treatments with dental surgery seek to displace tooth to the correct position within the dental arch. To report a clinical case that took advantage of an unerupted third molar. A male patient, 18 years of age, was referred by his dentist to evaluate the third molars. The clinical exam revealed no visible lower third molars. The computed tomography (CT) exam showed the presence of a supernumerary tooth in the region of the mandibular ramus, on the left side, and impaction of the third molar, which was causing root resorption on the second molar, thus making it impossible to remain in the buccal cavity. The preferred option, therefore, was to remove both second molar and the supernumerary tooth, in addition to attaching a device to the third molar during surgery for further traction. After 12 months, the third molar reached the proper position. When a mandibular second permanent molar shows an atypical root resorption, an impacted third molar can effectively substitute the tooth by using an appropriate orthodontic-surgical approach.

  9. Research to Support the Determination of Spacecraft Maximum Acceptable Concentrations of Potential Atmospheric Contaminants

    NASA Technical Reports Server (NTRS)

    Orr, John L.

    1997-01-01

    In many ways, the typical approach to the handling of bibliographic material for generating review articles and similar manuscripts has changed little since the use of xerographic reproduction has become widespread. The basic approach is to collect reprints of the relevant material and place it in folders or stacks based on its dominant content. As the amount of information available increases with the passage of time, the viability of this mechanical approach to bibliographic management decreases. The personal computer revolution has changed the way we deal with many familiar tasks. For example, word processing on personal computers has supplanted the typewriter for many applications. Similarly, spreadsheets have not only replaced many routine uses of calculators but have also made possible new applications because the cost of calculation is extremely low. Objective The objective of this research was to use personal computer bibliographic software technology to support the determination of spacecraft maximum acceptable concentration (SMAC) values. Specific Aims The specific aims were to produce draft SMAC documents for hydrogen sulfide and tetrachloroethylene taking maximum advantage of the bibliographic software.

  10. Methods for utilizing maximum power from a solar array

    NASA Technical Reports Server (NTRS)

    Decker, D. K.

    1972-01-01

    A preliminary study of maximum power utilization methods was performed for an outer planet spacecraft using an ion thruster propulsion system and a solar array as the primary energy source. The problems which arise from operating the array at or near the maximum power point of its 1-V characteristic are discussed. Two closed loop system configurations which use extremum regulators to track the array's maximum power point are presented. Three open loop systems are presented that either: (1) measure the maximum power of each array section and compute the total array power, (2) utilize a reference array to predict the characteristics of the solar array, or (3) utilize impedance measurements to predict the maximum power utilization. The advantages and disadvantages of each system are discussed and recommendations for further development are made.

  11. Understanding the Benefits and Limitations of Increasing Maximum Rotor Tip Speed for Utility-Scale Wind Turbines

    NASA Astrophysics Data System (ADS)

    Ning, A.; Dykes, K.

    2014-06-01

    For utility-scale wind turbines, the maximum rotor rotation speed is generally constrained by noise considerations. Innovations in acoustics and/or siting in remote locations may enable future wind turbine designs to operate with higher tip speeds. Wind turbines designed to take advantage of higher tip speeds are expected to be able to capture more energy and utilize lighter drivetrains because of their decreased maximum torque loads. However, the magnitude of the potential cost savings is unclear, and the potential trade-offs with rotor and tower sizing are not well understood. A multidisciplinary, system-level framework was developed to facilitate wind turbine and wind plant analysis and optimization. The rotors, nacelles, and towers of wind turbines are optimized for minimum cost of energy subject to a large number of structural, manufacturing, and transportation constraints. These optimization studies suggest that allowing for higher maximum tip speeds could result in a decrease in the cost of energy of up to 5% for land-based sites and 2% for offshore sites when using current technology. Almost all of the cost savings are attributed to the decrease in gearbox mass as a consequence of the reduced maximum rotor torque. Although there is some increased energy capture, it is very minimal (less than 0.5%). Extreme increases in tip speed are unnecessary; benefits for maximum tip speeds greater than 100-110 m/s are small to nonexistent.

  12. Socioeconomic differences in alcohol-related risk-taking behaviours.

    PubMed

    Livingston, Michael

    2014-11-01

    There is substantial research showing that low socioeconomic position is a predictor of negative outcomes from alcohol consumption, while alcohol consumption itself does not exhibit a strong social gradient. This study aims to examine socioeconomic differences in self-reported alcohol-related risk-taking behaviour to explore whether differences in risk-taking while drinking may explain some of the socioeconomic disparities in alcohol-related harm. Cross-sectional data from current drinkers (n = 21 452) in the 2010 wave of the Australian National Drug Strategy Household Survey were used. Ten items on risk-taking behaviour while drinking were combined into two risk scores, and zero-inflated Poisson regression was used to assess the relationship between socioeconomic position and risk-taking while controlling for age, sex and alcohol consumption. Socioeconomically advantaged respondents reported substantially higher rates of alcohol-related hazardous behaviour than socioeconomically disadvantaged respondents. Controlling for age, sex, volume of drinking and frequency of heavy drinking, respondents living in the most advantaged quintile of neighbourhoods reported significantly higher rates of hazardous behaviour than those in the least advantaged quintile. A similar pattern was evident for household income. Socioeconomically advantaged Australians engage in alcohol-related risky behaviour at higher rates than more disadvantaged Australians even with alcohol consumption controlled. The significant socioeconomic disparities in negative consequences linked to alcohol consumption cannot in this instance be explained via differences in behaviour while drinking. Other factors not directly related to alcohol consumption may be responsible for health inequalities in outcomes with significant alcohol involvement. © 2014 Australasian Professional Society on Alcohol and other Drugs.

  13. Random versus maximum entropy models of neural population activity

    NASA Astrophysics Data System (ADS)

    Ferrari, Ulisse; Obuchi, Tomoyuki; Mora, Thierry

    2017-04-01

    The principle of maximum entropy provides a useful method for inferring statistical mechanics models from observations in correlated systems, and is widely used in a variety of fields where accurate data are available. While the assumptions underlying maximum entropy are intuitive and appealing, its adequacy for describing complex empirical data has been little studied in comparison to alternative approaches. Here, data from the collective spiking activity of retinal neurons is reanalyzed. The accuracy of the maximum entropy distribution constrained by mean firing rates and pairwise correlations is compared to a random ensemble of distributions constrained by the same observables. For most of the tested networks, maximum entropy approximates the true distribution better than the typical or mean distribution from that ensemble. This advantage improves with population size, with groups as small as eight being almost always better described by maximum entropy. Failure of maximum entropy to outperform random models is found to be associated with strong correlations in the population.

  14. Monitoring mangrove forests: Are we taking full advantage of technology?

    NASA Astrophysics Data System (ADS)

    Younes Cárdenas, Nicolás; Joyce, Karen E.; Maier, Stefan W.

    2017-12-01

    Mangrove forests grow in the estuaries of 124 tropical countries around the world. Because in-situ monitoring of mangroves is difficult and time-consuming, remote sensing technologies are commonly used to monitor these ecosystems. Landsat satellites have provided regular and systematic images of mangrove ecosystems for over 30 years, yet researchers often cite budget and infrastructure constraints to justify the underuse this resource. Since 2001, over 50 studies have used Landsat or ASTER imagery for mangrove monitoring, and most focus on the spatial extent of mangroves, rarely using more than five images. Even after the Landsat archive was made free for public use, few studies used more than five images, despite the clear advantages of using more images (e.g. lower signal-to-noise ratios). The main argument of this paper is that, with freely available imagery and high performance computing facilities around the world, it is up to researchers to acquire the necessary programming skills to use these resources. Programming skills allow researchers to automate repetitive and time-consuming tasks, such as image acquisition and processing, consequently reducing up to 60% of the time dedicated to these activities. These skills also help scientists to review and re-use algorithms, hence making mangrove research more agile. This paper contributes to the debate on why scientists need to learn to program, not only to challenge prevailing approaches to mangrove research, but also to expand the temporal and spatial extents that are commonly used for mangrove research.

  15. Multi-GPU maximum entropy image synthesis for radio astronomy

    NASA Astrophysics Data System (ADS)

    Cárcamo, M.; Román, P. E.; Casassus, S.; Moral, V.; Rannou, F. R.

    2018-01-01

    The maximum entropy method (MEM) is a well known deconvolution technique in radio-interferometry. This method solves a non-linear optimization problem with an entropy regularization term. Other heuristics such as CLEAN are faster but highly user dependent. Nevertheless, MEM has the following advantages: it is unsupervised, it has a statistical basis, it has a better resolution and better image quality under certain conditions. This work presents a high performance GPU version of non-gridding MEM, which is tested using real and simulated data. We propose a single-GPU and a multi-GPU implementation for single and multi-spectral data, respectively. We also make use of the Peer-to-Peer and Unified Virtual Addressing features of newer GPUs which allows to exploit transparently and efficiently multiple GPUs. Several ALMA data sets are used to demonstrate the effectiveness in imaging and to evaluate GPU performance. The results show that a speedup from 1000 to 5000 times faster than a sequential version can be achieved, depending on data and image size. This allows to reconstruct the HD142527 CO(6-5) short baseline data set in 2.1 min, instead of 2.5 days that takes a sequential version on CPU.

  16. A semi-empirical model for the estimation of maximum horizontal displacement due to liquefaction-induced lateral spreading

    USGS Publications Warehouse

    Faris, Allison T.; Seed, Raymond B.; Kayen, Robert E.; Wu, Jiaer

    2006-01-01

    During the 1906 San Francisco Earthquake, liquefaction-induced lateral spreading and resultant ground displacements damaged bridges, buried utilities, and lifelines, conventional structures, and other developed works. This paper presents an improved engineering tool for the prediction of maximum displacement due to liquefaction-induced lateral spreading. A semi-empirical approach is employed, combining mechanistic understanding and data from laboratory testing with data and lessons from full-scale earthquake field case histories. The principle of strain potential index, based primary on correlation of cyclic simple shear laboratory testing results with in-situ Standard Penetration Test (SPT) results, is used as an index to characterized the deformation potential of soils after they liquefy. A Bayesian probabilistic approach is adopted for development of the final predictive model, in order to take fullest advantage of the data available and to deal with the inherent uncertainties intrinstiic to the back-analyses of field case histories. A case history from the 1906 San Francisco Earthquake is utilized to demonstrate the ability of the resultant semi-empirical model to estimate maximum horizontal displacement due to liquefaction-induced lateral spreading.

  17. Trellises and Trellis-Based Decoding Algorithms for Linear Block Codes. Part 3; A Recursive Maximum Likelihood Decoding

    NASA Technical Reports Server (NTRS)

    Lin, Shu; Fossorier, Marc

    1998-01-01

    The Viterbi algorithm is indeed a very simple and efficient method of implementing the maximum likelihood decoding. However, if we take advantage of the structural properties in a trellis section, other efficient trellis-based decoding algorithms can be devised. Recently, an efficient trellis-based recursive maximum likelihood decoding (RMLD) algorithm for linear block codes has been proposed. This algorithm is more efficient than the conventional Viterbi algorithm in both computation and hardware requirements. Most importantly, the implementation of this algorithm does not require the construction of the entire code trellis, only some special one-section trellises of relatively small state and branch complexities are needed for constructing path (or branch) metric tables recursively. At the end, there is only one table which contains only the most likely code-word and its metric for a given received sequence r = (r(sub 1), r(sub 2),...,r(sub n)). This algorithm basically uses the divide and conquer strategy. Furthermore, it allows parallel/pipeline processing of received sequences to speed up decoding.

  18. Deployment technique that takes advantage of the characteristics of Enterprise VRD2: an in vitro study.

    PubMed

    Chihara, Hideo; Ishii, Akira; Kikuchi, Takayuki; Ikeda, Hiroyuki; Arai, Daisuke; Miyamoto, Susumu

    2017-10-01

    Enterprise VRD, a stent frequently used to assist coil embolization of cerebral aneurysms, has been upgraded to reduce the risk of incomplete stent apposition (ISA), a known risk factor for thromboembolic complications. To compare the performances of Enterprise VRD and Enterprise VRD2 in curved vessels, and to investigate a deployment method that takes advantage of the features of Enterprise VRD2 to achieve better vessel wall apposition. A silicone vascular model connected to a temperature-adjustable perfusion circuit was used. First, Enterprise VRD and Enterprise VRD2 were deployed under fluoroscopy and then ISA was evaluated as the stent cross-sectional area ratio at the curved segment of the vessel. For the measurements, each stent was deployed in vessels with different angles of curvature. Second, the incidence of ISA after insertion of Enterprise VRD2 by the 'pushing over outer curve technique', in which stents are deployed along the outer curve of vessels with continuous wire advancement, was compared with 'Heller's push and pull technique'. For all stents, the cross-sectional area ratio decreased with acute curvature of the vessel. Comparisons of the two stents showed that Enterprise VRD2 was better than Enterprise VRD in maintaining a greater cross-sectional area ratio in curved vessels. In addition, kinking with an acute curvature was also minimized with Enterprise VRD2. Furthermore, ISA was reduced using our technique with Enterprise VRD2. Enterprise VRD2 is superior to Enterprise VRD in reducing ISA in curved vessels and can alter ISA according to the deployment technique used. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  19. Upward Wealth Mobility: Exploring the Roman Catholic Advantage

    ERIC Educational Resources Information Center

    Keister, Lisa A.

    2007-01-01

    Wealth inequality is among the most extreme forms of stratification in the United States, and upward wealth mobility is not common. Yet mobility is possible, and this paper takes advantage of trends among a unique group to explore the processes that generate mobility. I show that non-Hispanic whites raised in Roman Catholic families have been…

  20. Advantages and Disadvantages of Weighted Grading. Research Brief

    ERIC Educational Resources Information Center

    Walker, Karen

    2004-01-01

    What are the advantages and disadvantages of weighted grading? The primary purpose of weighted grading has been to encourage high school students to take more rigorous courses. This effort is then acknowledged by more weight being given to the grade for a specified class. There are numerous systems of weighted grading cited in the literature from…

  1. Maximum Relative Entropy of Coherence: An Operational Coherence Measure.

    PubMed

    Bu, Kaifeng; Singh, Uttam; Fei, Shao-Ming; Pati, Arun Kumar; Wu, Junde

    2017-10-13

    The operational characterization of quantum coherence is the cornerstone in the development of the resource theory of coherence. We introduce a new coherence quantifier based on maximum relative entropy. We prove that the maximum relative entropy of coherence is directly related to the maximum overlap with maximally coherent states under a particular class of operations, which provides an operational interpretation of the maximum relative entropy of coherence. Moreover, we show that, for any coherent state, there are examples of subchannel discrimination problems such that this coherent state allows for a higher probability of successfully discriminating subchannels than that of all incoherent states. This advantage of coherent states in subchannel discrimination can be exactly characterized by the maximum relative entropy of coherence. By introducing a suitable smooth maximum relative entropy of coherence, we prove that the smooth maximum relative entropy of coherence provides a lower bound of one-shot coherence cost, and the maximum relative entropy of coherence is equivalent to the relative entropy of coherence in the asymptotic limit. Similar to the maximum relative entropy of coherence, the minimum relative entropy of coherence has also been investigated. We show that the minimum relative entropy of coherence provides an upper bound of one-shot coherence distillation, and in the asymptotic limit the minimum relative entropy of coherence is equivalent to the relative entropy of coherence.

  2. Taking advantage of modern turbines

    NASA Astrophysics Data System (ADS)

    Thresher, Robert

    2018-06-01

    Wind facilities have generally deployed turbines of the same power and height in regular uniform arrays. Now, the modern generation of turbines, with customer-selectable tower heights and larger rotors, can significantly increase wind energy's economic potential using less land to generate cheaper electricity.

  3. Taking advantage of modern turbines

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Thresher, Robert

    Here, wind facilities have generally deployed turbines of the same power and height in regular uniform arrays. Now, the modern generation of turbines, with customer-selectable tower heights and larger rotors, can significantly increase wind energy's economic potential using less land to generate cheaper electricity.

  4. Taking advantage of modern turbines

    DOE PAGES

    Thresher, Robert

    2018-05-14

    Here, wind facilities have generally deployed turbines of the same power and height in regular uniform arrays. Now, the modern generation of turbines, with customer-selectable tower heights and larger rotors, can significantly increase wind energy's economic potential using less land to generate cheaper electricity.

  5. Take Advantage of Constitution Day

    ERIC Educational Resources Information Center

    McCune, Bonnie F.

    2008-01-01

    The announcement of the mandate for Constitution and Citizenship Day shortly before September, 2005, probably led to groans of dismay. Not another "must-do" for teachers and schools already stressed by federal and state requirements for standardized tests, increasingly rigid curricula, and scrutiny from the public and officials. But the…

  6. The Critical Advantage: Developing Critical Thinking Skills in School

    ERIC Educational Resources Information Center

    Gormley, William T., Jr.

    2017-01-01

    In "The Critical Advantage," noted scholar and early childhood expert William T. Gormley, Jr. takes a wide ranging look at the important role of critical thinking in preparing students for college, careers, and civic life. Drawing on research from psychology, philosophy, business, political science, neuroscience, and other disciplines,…

  7. Allowable levels of take for the trade in Nearctic songbirds.

    PubMed

    Johnson, Fred A; Walters, Matthew A H; Boomer, G Scott

    2012-06-01

    The take of Nearctic songbirds for the caged-bird trade is an important cultural and economic activity in Mexico, but its sustainability has been questioned. We relied on the theta-logistic population model to explore options for setting allowable levels of take for 11 species of passerines that were subject to legal take in Mexico in 2010. Because estimates of population size necessary for making-periodic adjustments to levels of take are not routinely available, we examined the conditions under which a constant level of take might contribute to population depletion (i.e., a population below its level of maximum net productivity). The chance of depleting a population is highest when levels of take are based on population sizes that happen to be much lower or higher than the level of maximum net productivity, when environmental variation is relatively high and serially correlated, and when the interval between estimation of population size is relatively long (> or = 5 years). To estimate demographic rates of songbirds involved in the Mexican trade we relied on published information and allometric relationships to develop probability distributions for key rates, and then sampled from those distributions to characterize the uncertainty in potential levels of take. Estimates of the intrinsic rate of growth (r) were highly variable, but median estimates were consistent with those expected for relatively short-lived, highly fecund species. Allowing for the possibility of nonlinear density dependence generally resulted in allowable levels of take that were lower than would have been the case under an assumption of linearity. Levels of take authorized by the Mexican government in 2010 for the 11 species we examined were small in comparison to relatively conservative allowable levels of take (i.e., those intended to achieve 50% of maximum sustainable yield). However, the actual levels of take in Mexico are unknown and almost certainly exceed the authorized take. Also, the

  8. Allowable levels of take for the trade in Nearctic songbirds

    USGS Publications Warehouse

    Johnson, Fred A.; Walters, Matthew A.H.; Boomer, G. Scott

    2012-01-01

    The take of Nearctic songbirds for the caged-bird trade is an important cultural and economic activity in Mexico, but its sustainability has been questioned. We relied on the theta-logistic population model to explore options for setting allowable levels of take for 11 species of passerines that were subject to legal take in Mexico in 2010. Because estimates of population size necessary for making periodic adjustments to levels of take are not routinely available, we examined the conditions under which a constant level of take might contribute to population depletion (i.e., a population below its level of maximum net productivity). The chance of depleting a population is highest when levels of take are based on population sizes that happen to be much lower or higher than the level of maximum net productivity, when environmental variation is relatively high and serially correlated, and when the interval between estimation of population size is relatively long (≥5 years). To estimate demographic rates of songbirds involved in the Mexican trade we relied on published information and allometric relationships to develop probability distributions for key rates, and then sampled from those distributions to characterize the uncertainty in potential levels of take. Estimates of the intrinsic rate of growth (r) were highly variable, but median estimates were consistent with those expected for relatively short-lived, highly fecund species. Allowing for the possibility of nonlinear density dependence generally resulted in allowable levels of take that were lower than would have been the case under an assumption of linearity. Levels of take authorized by the Mexican government in 2010 for the 11 species we examined were small in comparison to relatively conservative allowable levels of take (i.e., those intended to achieve 50% of maximum sustainable yield). However, the actual levels of take in Mexico are unknown and almost certainly exceed the authorized take. Also, the take

  9. Maximum power point tracker for photovoltaic power plants

    NASA Astrophysics Data System (ADS)

    Arcidiacono, V.; Corsi, S.; Lambri, L.

    The paper describes two different closed-loop control criteria for the maximum power point tracking of the voltage-current characteristic of a photovoltaic generator. The two criteria are discussed and compared, inter alia, with regard to the setting-up problems that they pose. Although a detailed analysis is not embarked upon, the paper also provides some quantitative information on the energy advantages obtained by using electronic maximum power point tracking systems, as compared with the situation in which the point of operation of the photovoltaic generator is not controlled at all. Lastly, the paper presents two high-efficiency MPPT converters for experimental photovoltaic plants of the stand-alone and the grid-interconnected type.

  10. Taking Advantage of STEM (Science, Technology, Engineering, and Math) Popularity to Enhance Student/Public Engagement

    NASA Astrophysics Data System (ADS)

    Dittrich, T. M.

    2011-12-01

    . Our goal is to expand the use of these modules to a more broad public audience, including at a future campus/public event know as "All Things Water". We have also organized a walking tour/demo with 3rd-5th graders in a small mining town west of Boulder where we hiked to an old historical mine site, measured water quality (pH, dissolved lead, conductivity), and coated the inside of small bottles with silver. Organizing and hosting a conference can also be a great way to facilitate a discussion of ideas within the community. "All Things STEM" organized a broad student research conference related to water quality and water treatment which included research from 22 students from 11 different countries. We worked with 12 local engineering consultants, municipalities, and local businesses to provide 2000 for student awards. Our presentation will focus on lessons we have learned on how to take advantage of student energy, excitement, and time on campus to receive funding opportunities for planning events that engage the public. We will also talk about our experiences in using student energy to develop partnerships with K-12 schools, community groups, and industry professionals.

  11. A Maximum Radius for Habitable Planets.

    PubMed

    Alibert, Yann

    2015-09-01

    We compute the maximum radius a planet can have in order to fulfill two constraints that are likely necessary conditions for habitability: 1- surface temperature and pressure compatible with the existence of liquid water, and 2- no ice layer at the bottom of a putative global ocean, that would prevent the operation of the geologic carbon cycle to operate. We demonstrate that, above a given radius, these two constraints cannot be met: in the Super-Earth mass range (1-12 Mearth), the overall maximum that a planet can have varies between 1.8 and 2.3 Rearth. This radius is reduced when considering planets with higher Fe/Si ratios, and taking into account irradiation effects on the structure of the gas envelope.

  12. Prediction of Maximum Oxygen Consumption from Walking, Jogging, or Running.

    ERIC Educational Resources Information Center

    Larsen, Gary E.; George, James D.; Alexander, Jeffrey L.; Fellingham, Gilbert W.; Aldana, Steve G.; Parcell, Allen C.

    2002-01-01

    Developed a cardiorespiratory endurance test that retained the inherent advantages of submaximal testing while eliminating reliance on heart rate measurement in predicting maximum oxygen uptake (VO2max). College students completed three exercise tests. The 1.5-mile endurance test predicted VO2max from submaximal exercise without requiring heart…

  13. Optimum take-off angle in the long jump.

    PubMed

    Linthorne, Nicholas P; Guzman, Maurice S; Bridgett, Lisa A

    2005-07-01

    In this study, we found that the optimum take-off angle for a long jumper may be predicted by combining the equation for the range of a projectile in free flight with the measured relations between take-off speed, take-off height and take-off angle for the athlete. The prediction method was evaluated using video measurements of three experienced male long jumpers who performed maximum-effort jumps over a wide range of take-off angles. To produce low take-off angles the athletes used a long and fast run-up, whereas higher take-off angles were produced using a progressively shorter and slower run-up. For all three athletes, the take-off speed decreased and the take-off height increased as the athlete jumped with a higher take-off angle. The calculated optimum take-off angles were in good agreement with the athletes' competition take-off angles.

  14. Building Models in the Classroom: Taking Advantage of Sophisticated Geomorphic Numerical Tools Using a Simple Graphical User Interface

    NASA Astrophysics Data System (ADS)

    Roy, S. G.; Koons, P. O.; Gerbi, C. C.; Capps, D. K.; Tucker, G. E.; Rogers, Z. A.

    2014-12-01

    Sophisticated numerical tools exist for modeling geomorphic processes and linking them to tectonic and climatic systems, but they are often seen as inaccessible for users with an exploratory level of interest. We have improved the accessibility of landscape evolution models by producing a simple graphics user interface (GUI) that takes advantage of the Channel-Hillslope Integrated Landscape Development (CHILD) model. Model access is flexible: the user can edit values for basic geomorphic, tectonic, and climate parameters, or obtain greater control by defining the spatiotemporal distributions of those parameters. Users can make educated predictions by choosing their own parametric values for the governing equations and interpreting the results immediately through model graphics. This method of modeling allows users to iteratively build their understanding through experimentation. Use of this GUI is intended for inquiry and discovery-based learning activities. We discuss a number of examples of how the GUI can be used at the upper high school, introductory university, and advanced university level. Effective teaching modules initially focus on an inquiry-based example guided by the instructor. As students become familiar with the GUI and the CHILD model, the class can shift to more student-centered exploration and experimentation. To make model interpretations more robust, digital elevation models can be imported and direct comparisons can be made between CHILD model results and natural topography. The GUI is available online through the University of Maine's Earth and Climate Sciences website, through the Community Surface Dynamics Modeling System (CSDMS) model repository, or by contacting the corresponding author.

  15. Medicare Advantage Plans Pay Hospitals Less Than Traditional Medicare Pays.

    PubMed

    Baker, Laurence C; Bundorf, M Kate; Devlin, Aileen M; Kessler, Daniel P

    2016-08-01

    There is ongoing debate about how prices paid to providers by Medicare Advantage plans compare to prices paid by fee-for-service Medicare. We used data from Medicare and the Health Care Cost Institute to identify the prices paid for hospital services by fee-for-service (FFS) Medicare, Medicare Advantage plans, and commercial insurers in 2009 and 2012. We calculated the average price per admission, and its trend over time, in each of the three types of insurance for fixed baskets of hospital admissions across metropolitan areas. After accounting for differences in hospital networks, geographic areas, and case-mix between Medicare Advantage and FFS Medicare, we found that Medicare Advantage plans paid 5.6 percent less for hospital services than FFS Medicare did. Without taking into account the narrower networks of Medicare Advantage, the program paid 8.0 percent less than FFS Medicare. We also found that the rates paid by commercial plans were much higher than those of either Medicare Advantage or FFS Medicare, and growing. At least some of this difference comes from the much higher prices that commercial plans pay for profitable service lines. Project HOPE—The People-to-People Health Foundation, Inc.

  16. Numbers And Gains Of Neurons In Winner-Take-All Networks

    NASA Technical Reports Server (NTRS)

    Brown, Timothy X.

    1993-01-01

    Report presents theoretical study of gains required in neurons to implement winner-take-all electronic neural network of given size and related question of maximum size of winner-take-all network in which neurons have specified sigmoid transfer or response function with specified gain.

  17. The spillover effects of Medicare managed care: Medicare Advantage and hospital utilization.

    PubMed

    Baicker, Katherine; Chernew, Michael E; Robbins, Jacob A

    2013-12-01

    More than a quarter of Medicare beneficiaries are enrolled in Medicare Advantage, which was created in large part to improve the efficiency of health care delivery by promoting competition among private managed care plans. This paper explores the spillover effects of the Medicare Advantage program on the traditional Medicare program and other patients, taking advantage of changes in Medicare Advantage payment policy to isolate exogenous increases in Medicare Advantage enrollment and trace out the effects of greater managed care penetration on hospital utilization and spending throughout the health care system. We find that when more seniors enroll in Medicare managed care, hospital costs decline for all seniors and for commercially insured younger populations. Greater managed care penetration is not associated with fewer hospitalizations, but is associated with lower costs and shorter stays per hospitalization. These spillovers are substantial - offsetting more than 10% of increased payments to Medicare Advantage plans. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. The Spillover Effects of Medicare Managed Care: Medicare Advantage and Hospital Utilization

    PubMed Central

    Baicker, Katherine; Chernew, Michael; Robbins, Jacob

    2013-01-01

    More than a quarter of Medicare beneficiaries are enrolled in Medicare Advantage, which was created in large part to improve the efficiency of health care delivery by promoting competition among private managed care plans. This paper explores the spillover effects of the Medicare Advantage program on the traditional Medicare program and other patients, taking advantage of changes in Medicare Advantage payment policy to isolate exogenous increases in Medicare Advantage enrollment and trace out the effects of greater managed care penetration on hospital utilization and spending throughout the health care system. We find that when more seniors enroll in Medicare managed care, hospital costs decline for all seniors and for commercially insured younger populations. Greater managed care penetration is not associated with fewer hospitalizations, but is associated with lower costs and shorter stays per hospitalization. These spillovers are substantial – offsetting more than 10% of increased payments to Medicare Advantage plans. PMID:24308880

  19. Maximum-Entropy Inference with a Programmable Annealer

    PubMed Central

    Chancellor, Nicholas; Szoke, Szilard; Vinci, Walter; Aeppli, Gabriel; Warburton, Paul A.

    2016-01-01

    Optimisation problems typically involve finding the ground state (i.e. the minimum energy configuration) of a cost function with respect to many variables. If the variables are corrupted by noise then this maximises the likelihood that the solution is correct. The maximum entropy solution on the other hand takes the form of a Boltzmann distribution over the ground and excited states of the cost function to correct for noise. Here we use a programmable annealer for the information decoding problem which we simulate as a random Ising model in a field. We show experimentally that finite temperature maximum entropy decoding can give slightly better bit-error-rates than the maximum likelihood approach, confirming that useful information can be extracted from the excited states of the annealer. Furthermore we introduce a bit-by-bit analytical method which is agnostic to the specific application and use it to show that the annealer samples from a highly Boltzmann-like distribution. Machines of this kind are therefore candidates for use in a variety of machine learning applications which exploit maximum entropy inference, including language processing and image recognition. PMID:26936311

  20. Songbird - AN Innovative Uas Combining the Advantages of Fixed Wing and Multi Rotor Uas

    NASA Astrophysics Data System (ADS)

    Thamm, F.-P.; Brieger, N.; Neitzke, K.-P.; Meyer, M.; Jansen, R.; Mönninghof, M.

    2015-08-01

    This paper describes a family of innovative fixed wing UAS with can vertical take off and land - the SONGBIRD family. With nominal payloads starting from 0.5 kg they can take off and land safely like a multi-rotor UAV, removing the need for an airstrip for the critical phases of operation. A specially designed flight controller allows stable flight at every point of the transition phase between VTOL and fixed wing mode. Because of this smooth process with a all time stable flight, very expensive payload like hyperspectral sensors or advanced optical cameras can be used. Due to their design all airplanes of the SONGBIRD family have excellent horizontal flight properties, a maximum speed of over 110 km/h, good gliding properties and long flight times of up to 1 h. Missions were flown in wind speeds up to 18 m/s. At every time of the flight it is possible to interrupt the mission and hover over a point of interest for detail investigations. The complete flight, including take-off and landing can be performed by autopilot. Designed for daily use in professional environments, SONGBIRDs are built out of glass-fibre and carbon composites for a long service life. For safe operations comprehensive security features are implemented, for example redundant flight controllers and sensors, advanced power management system and mature fail safe procedures. The aircraft can be dismantled into small parts for transportation. SONGBIRDS are available for different pay loads, from 500 g to 2 kg. The SONGBIRD family are interesting tools combining the advantages of multi-copter and fixed wing UAS.

  1. A Spatiotemporal-Chaos-Based Cryptosystem Taking Advantage of Both Synchronous and Self-Synchronizing Schemes

    NASA Astrophysics Data System (ADS)

    Lü, Hua-Ping; Wang, Shi-Hong; Li, Xiao-Wen; Tang, Guo-Ning; Kuang, Jin-Yu; Ye, Wei-Ping; Hu, Gang

    2004-06-01

    Two-dimensional one-way coupled map lattices are used for cryptography where multiple space units produce chaotic outputs in parallel. One of the outputs plays the role of driving for synchronization of the decryption system while the others perform the function of information encoding. With this separation of functions the receiver can establish a self-checking and self-correction mechanism, and enjoys the advantages of both synchronous and self-synchronizing schemes. A comparison between the present system with the system of advanced encryption standard (AES) is presented in the aspect of channel noise influence. Numerical investigations show that our system is much stronger than AES against channel noise perturbations, and thus can be better used for secure communications with large channel noise.

  2. Teachable Moment: Google Earth Takes Us There

    ERIC Educational Resources Information Center

    Williams, Ann; Davinroy, Thomas C.

    2015-01-01

    In the current educational climate, where clearly articulated learning objectives are required, it is clear that the spontaneous teachable moment still has its place. Authors Ann Williams and Thomas Davinroy think that instructors from almost any discipline can employ Google Earth as a tool to take advantage of teachable moments through the…

  3. The dynamic-stimulus advantage of visual symmetry perception.

    PubMed

    Niimi, Ryosuke; Watanabe, Katsumi; Yokosawa, Kazuhiko

    2008-09-01

    It has been speculated that visual symmetry perception from dynamic stimuli involves mechanisms different from those for static stimuli. However, previous studies found no evidence that dynamic stimuli lead to active temporal processing and improve symmetry detection. In this study, four psychophysical experiments investigated temporal processing in symmetry perception using both dynamic and static stimulus presentations of dot patterns. In Experiment 1, rapid successive presentations of symmetric patterns (e.g., 16 patterns per 853 ms) produced more accurate discrimination of orientations of symmetry axes than static stimuli (single pattern presented through 853 ms). In Experiments 2-4, we confirmed that the dynamic-stimulus advantage depended upon presentation of a large number of unique patterns within a brief period (853 ms) in the dynamic conditions. Evidently, human vision takes advantage of temporal processing for symmetry perception from dynamic stimuli.

  4. Know the risk, take the win: how executive functions and probability processing influence advantageous decision making under risk conditions.

    PubMed

    Brand, Matthias; Schiebener, Johannes; Pertl, Marie-Theres; Delazer, Margarete

    2014-01-01

    Recent models on decision making under risk conditions have suggested that numerical abilities are important ingredients of advantageous decision-making performance, but empirical evidence is still limited. The results of our first study show that logical reasoning and basic mental calculation capacities predict ratio processing and that ratio processing predicts decision making under risk. In the second study, logical reasoning together with executive functions predicted probability processing (numeracy and probability knowledge), and probability processing predicted decision making under risk. These findings suggest that increasing an individual's understanding of ratios and probabilities should lead to more advantageous decisions under risk conditions.

  5. Taking Full Advantage of Children's Literature

    ERIC Educational Resources Information Center

    Serafini, Frank

    2012-01-01

    Teachers need a deeper understanding of the texts being discussed, in particular the various textual and visual aspects of picturebooks themselves, including the images, written text and design elements, to support how readers made sense of these texts. As teachers become familiar with aspects of literary criticism, art history, visual grammar,…

  6. Cigarette promotional offers: who takes advantage?

    PubMed

    White, Victoria M; White, Martha M; Freeman, Karen; Gilpin, Elizabeth A; Pierce, John P

    2006-03-01

    Promotional offers on cigarettes (e.g., dollar-off, multipack discounts) composed the largest share of tobacco industry marketing expenditures, totaling $8.9 billion, or 72% of the total budget in 2002. Internal industry documents indicate that young adults, potential quitters, and other price-sensitive groups are the targets of these marketing tactics. How effective they are in actually reaching these groups in the general population of smokers has not yet been investigated. Data were from 4618 current smokers responding to the large, random-digit-dialed population-based 2002 California Tobacco Survey. The characteristics were identified of smokers who reported that they used these offers "every time I see one." Thirty-five percent of smokers used promotional offers every time they saw one. Multivariate analyses identified young adults, women, African Americans, those with higher daily cigarette consumption, and those worried about cigarette costs as more likely to use promotional offers at every opportunity. Smokers most committed to quitting were no more likely to use promotional offers than those with no intention to quit. Cigarette brand was highly correlated with age and race/ethnicity, and therefore was not included in the multivariate analysis. Those who smoked menthol cigarettes and Camels, more often young adults and African Americans, were much more likely than those of other brands to use promotional offers. With the exception of smokers intending to quit, cigarette promotional offers are effectively reaching most industry-targeted groups. Importantly, young adults, who have the greatest long-term customer potential, are responding.

  7. Effects of Virtual Education on Academic Culture: Perceived Advantages and Disadvantages

    ERIC Educational Resources Information Center

    Jefferson, Renee N.; Arnold, Liz W.

    2009-01-01

    The perceived advantages and disadvantages of courses taught in online and face-to-face learning environments were explored for students taking an accounting and a data collection and analysis course. Both courses were taught in a face-to-face learning environment at the main or satellite campus. It was hypothesized that there would be…

  8. High precision Hugoniot measurements of D2 near maximum compression

    NASA Astrophysics Data System (ADS)

    Benage, John; Knudson, Marcus; Desjarlais, Michael

    2015-11-01

    The Hugoniot response of liquid deuterium has been widely studied due to its general importance and to the significant discrepancy in the inferred shock response obtained from early experiments. With improvements in dynamic compression platforms and experimental standards these results have converged and show general agreement with several equation of state (EOS) models, including quantum molecular dynamics (QMD) calculations within the Generalized Gradient Approximation (GGA). This approach to modeling the EOS has also proven quite successful for other materials and is rapidly becoming a standard approach. However, small differences remain among predictions obtained using different local and semi-local density functionals; these small differences show up in the deuterium Hugoniot at ~ 30-40 GPa near the region of maximum compression. Here we present experimental results focusing on that region of the Hugoniot and take advantage of advancements in the platform and standards, resulting in data with significantly higher precision than that obtained in previous studies. These new data may prove to distinguish between the subtle differences predicted by the various density functionals. Results of these experiments will be presented along with comparison to various QMD calculations. Sandia National Laboratories is a multi-program laboratory operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin company, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  9. Advantages of Aging.

    ERIC Educational Resources Information Center

    Palmore, Erdman

    1979-01-01

    There are at least 14 advantages of aging. Advantages to society of older persons include their lower criminal activity; greater political participation; increasing voluntary organization participation; work abilities; and visual perception abilities. Advantages for the individual include less criminal victimization; fewer accidents; social…

  10. Algorithms of maximum likelihood data clustering with applications

    NASA Astrophysics Data System (ADS)

    Giada, Lorenzo; Marsili, Matteo

    2002-12-01

    We address the problem of data clustering by introducing an unsupervised, parameter-free approach based on maximum likelihood principle. Starting from the observation that data sets belonging to the same cluster share a common information, we construct an expression for the likelihood of any possible cluster structure. The likelihood in turn depends only on the Pearson's coefficient of the data. We discuss clustering algorithms that provide a fast and reliable approximation to maximum likelihood configurations. Compared to standard clustering methods, our approach has the advantages that (i) it is parameter free, (ii) the number of clusters need not be fixed in advance and (iii) the interpretation of the results is transparent. In order to test our approach and compare it with standard clustering algorithms, we analyze two very different data sets: time series of financial market returns and gene expression data. We find that different maximization algorithms produce similar cluster structures whereas the outcome of standard algorithms has a much wider variability.

  11. Advantages of high-dose rate (HDR) brachytherapy in treatment of prostate cancer

    NASA Astrophysics Data System (ADS)

    Molokov, A. A.; Vanina, E. A.; Tseluyko, S. S.

    2017-09-01

    One of the modern methods of preserving organs radiation treatment is brachytherapy. This article analyzes the results of prostate brachytherapy. These studies of the advantages of high dose brachytherapy lead to the conclusion that this method of radiation treatment for prostate cancer has a favorable advantage in comparison with remote sensing methods, and is competitive, preserving organs in comparison to surgical methods of treatment. The use of the method of polyfocal transperineal biopsy during the brachytherapy session provides information on the volumetric spread of prostate cancer and adjust the dosimetry plan taking into account the obtained data.

  12. Leveraging Diversity Of Thought Through Inclusion: Advantages, Disadvantages, And Taking Advantage

    DTIC Science & Technology

    2017-03-17

    groups are cross- fertilizing one another within the organization .”30 Specifically, diversity and inclusion stimulate creativity by providing a...Squadron Officer College instructor once informed her class, “My squadron commander wanted me in his organization purely for diversity reasons.” The...better way for an Alabama Crimson Tide fan to get diversity of thought in his organization than to include an Auburn Tigers fan?” This example

  13. Technology and Curriculum: Will the Promised Revolution Take Place?

    ERIC Educational Resources Information Center

    Mojkowski, Charles

    1987-01-01

    To take advantage of the emerging technological revolution, education must undertake its own revolution. Otherwise, technology will never be successfully integrated into the curriculum and may effect change without improvement. Primary focus must be on the future of curriculum and instruction, particularly discipline-specific process skills and…

  14. Limitations to maximum running speed on flat curves.

    PubMed

    Chang, Young-Hui; Kram, Rodger

    2007-03-01

    Why is maximal running speed reduced on curved paths? The leading explanation proposes that an increase in lateral ground reaction force necessitates a decrease in peak vertical ground reaction force, assuming that maximum leg extension force is the limiting factor. Yet, no studies have directly measured these forces or tested this critical assumption. We measured maximum sprint velocities and ground reaction forces for five male humans sprinting along a straight track and compared them to sprints along circular tracks of 1, 2, 3, 4 and 6 m radii. Circular track sprint trials were performed either with or without a tether that applied centripetal force to the center of mass. Sprinters generated significantly smaller peak resultant ground reaction forces during normal curve sprinting compared to straight sprinting. This provides direct evidence against the idea that maximum leg extension force is always achieved and is the limiting factor. Use of the tether increased sprint speed, but not to expected values. During curve sprinting, the inside leg consistently generated smaller peak forces compared to the outside leg. Several competing biomechanical constraints placed on the stance leg during curve sprinting likely make the inside leg particularly ineffective at generating the ground reaction forces necessary to attain maximum velocities comparable to straight path sprinting. The ability of quadrupeds to redistribute function across multiple stance legs and decouple these multiple constraints may provide a distinct advantage for turning performance.

  15. Complexity, Competitive Intelligence and the "First Mover" Advantage

    NASA Astrophysics Data System (ADS)

    Fellman, Philip Vos; Post, Jonathan Vos

    In the following paper we explore some of the ways in which competitive intelligence and game theory can be employed to assist firms in deciding whether or not to undertake international market diversification and whether or not there is an advantage to being a market leader or a market follower overseas. In attempting to answer these questions, we take a somewhat unconventional approach. We first examine how some of the most recent advances in the physical and biological sciences can contribute to the ways in which we understand how firms behave. Subsequently, we propose a formal methodology for competitive intelligence. While space considerations here do not allow for a complete game-theoretic treatment of competitive intelligence and its use with respect to understanding first and second mover advantage in firm internationalization, that treatment can be found in its entirety in the on-line proceedings of the 6th International Conference on Complex Systems at http://knowledgetoday.org/wiki/indec.php/ICCS06/89

  16. Complexity, Competitive Intelligence and the "First Mover" Advantage

    NASA Astrophysics Data System (ADS)

    Fellman, Philip Vos; Post, Jonathan Vos

    In the following paper we explore some of the ways in which competitive intelligence and game theory can be employed to assist firms in deciding whether or not to undertake international market diversification and whether or not there is an advantage to being a market leader or a market follower overseas. In attempting to answer these questions, we take a somewhat unconventional approach. We first examine how some of the most recent advances in the physical and biological sciences can contribute to the ways in which we understand how firms behave. Subsequently, we propose a formal methodology for competitive intelligence. While space considerations here do not allow for a complete game-theoretic treatment of competitive intelligence and its use with respect to understanding first and second mover advantage in firm internationalization, that treatment can be found in its entirety in the on-line proceedings of the 6th International Conference on Complex Systems at e">http://knowledgetoday.org/wiki/indec.php/ICCS06/89.

  17. Finding a spherically symmetric cosmology from observations in observational coordinates — advantages and challenges

    NASA Astrophysics Data System (ADS)

    Araújo, M. E.; Stoeger, W. R.

    2011-07-01

    One of the continuing challenges in cosmology has been to determine the large-scale space-time metric from observations with a minimum of assumptions — without, for instance, assuming that the universe is almost Friedmann-Lemaître-Robertson-Walker (FLRW). If we are lucky enough this would be a way of demonstrating that our universe is FLRW, instead of presupposing it or simply showing that the observations are consistent with FLRW. Showing how to do this within the more general spherically symmetric, inhomogeneous space-time framework takes us a long way towards fulfilling this goal. In recent work researchers have shown how this can be done both in the traditional Lemaître-Tolman-Bondi (LTB) 3 + 1 coordinate framework, and in the observational coordinate (OC) framework, in which the radial coordinate y is null (light-like) and measured down the past light cone of the observer. In this paper we investigate the stability of solutions, and the use of data in the OC field equations including their time evolution — i.e. our procedure is not restricted to our past light cone — and compare both approaches with respect to the singularity problem at the maximum of the angular-diameter distance, the stability of solutions, and the use of data in the field equations. We also compare the two approaches with regard to determining the cosmological constant Λ. This allows a more detailed account and assessment of the OC integration procedure, and enables a comparison of the relative advantages of the two equivalent solution frameworks. Both formulations and integration procedures should, in principle, lead to the same results. However, as we show in this paper, the OC procedure manifests certain advantages, particularly in the avoidance of coordinate singularities at the maximum of the angular-diameter distance, and in the stability of the solutions obtained. This particular feature is what allows us to do the best fitting of the data to smooth data functions and the

  18. Insights on beer volatile profile: Optimization of solid-phase microextraction procedure taking advantage of the comprehensive two-dimensional gas chromatography structured separation.

    PubMed

    Martins, Cátia; Brandão, Tiago; Almeida, Adelaide; Rocha, Sílvia M

    2015-06-01

    The aroma profile of beer is crucial for its quality and consumer acceptance, which is modu-lated by a network of variables. The main goal of this study was to optimize solid-phase microextraction experimental parameters (fiber coating, extraction temperature, and time), taking advantage of the comprehensive two-dimensional gas chromatography structured separation. As far as we know, it is the first time that this approach was used to the untargeted and comprehensive study of the beer volatile profile. Decarbonation is a critical sample preparation step, and two conditions were tested: static and under ultrasonic treatment, and the static condition was selected. Considering the conditions that promoted the highest extraction efficiency, the following parameters were selected: poly(dimethylsiloxane)/divinylbenzene fiber coating, at 40ºC, using 10 min of pre-equilibrium followed by 30 min of extraction. Around 700-800 compounds per sample were detected, corresponding to the beer volatile profile. An exploratory application was performed with commercial beers, using a set of 32 compounds with reported impact on beer aroma, in which different patterns can be observed through the structured chromatogram. In summary, the obtained results emphasize the potential of this methodology to allow an in-depth study of volatile molecular composition of beer. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. The half-truth of first-mover advantage.

    PubMed

    Suarez, Fernando; Lanzolla, Gianvito

    2005-04-01

    Many executives take for granted that the first company in a new product category gets an unbeatable head start and reaps long-lasting benefits. But that doesn't always happen. The authors of this article discovered that much depends on the pace at which the category's technology is changing and the speed at which the market is evolving. By analyzing these two factors, companies can improve their odds of succeeding as first movers with the resources they possess. Gradual evolution in both the technology and the market provides a first mover with the best conditions for creating a dominant position that is long lasting (Hoover in the vacuum cleaner industry is a good example). In such calm waters, a company can defend its advantages even without exceptional skills or extensive financial resources. When the market is changing rapidly and the product isn't, a first entrant with extensive resources can obtain a long-lasting advantage (as Sony did with its Walkman personal stereo); a company with only limited resources probably must settle for a short-term benefit. When the market is static but the product is changing constantly, first-mover advantages of either kind--durable or short-lived--are unlikely. Only companies with very deep pockets can survive (think of Sony and the digital cameras it pioneered). Rapid churn in both the technology and the market creates the worst conditions. But if companies have an acute sense of when to exit-as Netscape demonstrated when it agreed to be acquired by AOL-a worthwhile short-term gain is possible. Before venturing into a newly forming market, you need to analyze the environment, assess your resources, then determine which type offirst-mover advantage is most achievable. Once you've gone into the water, you have no choice but to swim.

  20. Social customer relationship management: taking advantage of Web 2.0 and Big Data technologies.

    PubMed

    Orenga-Roglá, Sergio; Chalmeta, Ricardo

    2016-01-01

    The emergence of Web 2.0 and Big Data technologies has allowed a new customer relationship strategy based on interactivity and collaboration called Social Customer Relationship Management (Social CRM) to be created. This enhances customer engagement and satisfaction. The implementation of Social CRM is a complex task that involves different organisational, human and technological aspects. However, there is a lack of methodologies to assist companies in these processes. This paper shows a novel methodology that helps companies to implement Social CRM, taking into account different aspects such as social customer strategy, the Social CRM performance measurement system, the Social CRM business processes, or the Social CRM computer system. The methodology was applied to one company in order to validate and refine it.

  1. Taking a History of Childhood Trauma in Psychotherapy

    PubMed Central

    SAPORTA, JOSÉ A.; GANS, JEROME S.

    1995-01-01

    The authors examine the process of taking an initial history of childhood abuse and trauma in psychodynamic psychotherapy. In exploring the advantages, complexities, and potential complications of this practice, they hope to heighten the sensitivities of clinicians taking trauma histories. Emphasis on the need to be active in eliciting important historical material is balanced with discussion of concepts that can help therapists avoid interpersonal dynamics that reenact and perpetuate the traumas the therapy seeks to treat. Ensuring optimal psychotherapeutic treatment for patients who have experienced childhood trauma requires attention to the following concepts: a safe holding environment, destabilization, compliance, the repetition compulsion, and projective identification. PMID:22700250

  2. The Exposure Advantage: Early Exposure to a Multilingual Environment Promotes Effective Communication.

    PubMed

    Fan, Samantha P; Liberman, Zoe; Keysar, Boaz; Kinzler, Katherine D

    2015-07-01

    Early language exposure is essential to developing a formal language system, but may not be sufficient for communicating effectively. To understand a speaker's intention, one must take the speaker's perspective. Multilingual exposure may promote effective communication by enhancing perspective taking. We tested children on a task that required perspective taking to interpret a speaker's intended meaning. Monolingual children failed to interpret the speaker's meaning dramatically more often than both bilingual children and children who were exposed to a multilingual environment but were not bilingual themselves. Children who were merely exposed to a second language performed as well as bilingual children, despite having lower executive-function scores. Thus, the communicative advantages demonstrated by the bilinguals may be social in origin, and not due to enhanced executive control. For millennia, multilingual exposure has been the norm. Our study shows that such an environment may facilitate the development of perspective-taking tools that are critical for effective communication. © The Author(s) 2015.

  3. Maximum-performance fiber-optic irradiation with nonimaging designs.

    PubMed

    Fang, Y; Feuermann, D; Gordon, J M

    1997-10-01

    A range of practical nonimaging designs for optical fiber applications is presented. Rays emerging from a fiber over a restricted angular range (small numerical aperture) are needed to illuminate a small near-field detector at maximum radiative efficiency. These designs range from pure reflector (all-mirror), to pure dielectric (refractive and based on total internal reflection) to lens-mirror combinations. Sample designs are shown for a specific infrared fiber-optic irradiation problem of practical interest. Optical performance is checked with computer three-dimensional ray tracing. Compared with conventional imaging solutions, nonimaging units offer considerable practical advantages in compactness and ease of alignment as well as noticeably superior radiative efficiency.

  4. Medicare Advantage Plans

    MedlinePlus

    ... enrollment Find & compare doctors, hospitals, & other providers Medicare Advantage Plans A type of Medicare health plan offered ... a private company that contracts with Medicare. Medicare Advantage Plans provide all of your Part A and ...

  5. Advantages of Parallel Processing and the Effects of Communications Time

    NASA Technical Reports Server (NTRS)

    Eddy, Wesley M.; Allman, Mark

    2000-01-01

    Many computing tasks involve heavy mathematical calculations, or analyzing large amounts of data. These operations can take a long time to complete using only one computer. Networks such as the Internet provide many computers with the ability to communicate with each other. Parallel or distributed computing takes advantage of these networked computers by arranging them to work together on a problem, thereby reducing the time needed to obtain the solution. The drawback to using a network of computers to solve a problem is the time wasted in communicating between the various hosts. The application of distributed computing techniques to a space environment or to use over a satellite network would therefore be limited by the amount of time needed to send data across the network, which would typically take much longer than on a terrestrial network. This experiment shows how much faster a large job can be performed by adding more computers to the task, what role communications time plays in the total execution time, and the impact a long-delay network has on a distributed computing system.

  6. Case-Deletion Diagnostics for Maximum Likelihood Multipoint Quantitative Trait Locus Linkage Analysis

    PubMed Central

    Mendoza, Maria C.B.; Burns, Trudy L.; Jones, Michael P.

    2009-01-01

    Objectives Case-deletion diagnostic methods are tools that allow identification of influential observations that may affect parameter estimates and model fitting conclusions. The goal of this paper was to develop two case-deletion diagnostics, the exact case deletion (ECD) and the empirical influence function (EIF), for detecting outliers that can affect results of sib-pair maximum likelihood quantitative trait locus (QTL) linkage analysis. Methods Subroutines to compute the ECD and EIF were incorporated into the maximum likelihood QTL variance estimation components of the linkage analysis program MAPMAKER/SIBS. Performance of the diagnostics was compared in simulation studies that evaluated the proportion of outliers correctly identified (sensitivity), and the proportion of non-outliers correctly identified (specificity). Results Simulations involving nuclear family data sets with one outlier showed EIF sensitivities approximated ECD sensitivities well for outlier-affected parameters. Sensitivities were high, indicating the outlier was identified a high proportion of the time. Simulations also showed the enormous computational time advantage of the EIF. Diagnostics applied to body mass index in nuclear families detected observations influential on the lod score and model parameter estimates. Conclusions The EIF is a practical diagnostic tool that has the advantages of high sensitivity and quick computation. PMID:19172086

  7. Modelling information flow along the human connectome using maximum flow.

    PubMed

    Lyoo, Youngwook; Kim, Jieun E; Yoon, Sujung

    2018-01-01

    The human connectome is a complex network that transmits information between interlinked brain regions. Using graph theory, previously well-known network measures of integration between brain regions have been constructed under the key assumption that information flows strictly along the shortest paths possible between two nodes. However, it is now apparent that information does flow through non-shortest paths in many real-world networks such as cellular networks, social networks, and the internet. In the current hypothesis, we present a novel framework using the maximum flow to quantify information flow along all possible paths within the brain, so as to implement an analogy to network traffic. We hypothesize that the connection strengths of brain networks represent a limit on the amount of information that can flow through the connections per unit of time. This allows us to compute the maximum amount of information flow between two brain regions along all possible paths. Using this novel framework of maximum flow, previous network topological measures are expanded to account for information flow through non-shortest paths. The most important advantage of the current approach using maximum flow is that it can integrate the weighted connectivity data in a way that better reflects the real information flow of the brain network. The current framework and its concept regarding maximum flow provides insight on how network structure shapes information flow in contrast to graph theory, and suggests future applications such as investigating structural and functional connectomes at a neuronal level. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Maximum likelihood decoding of Reed Solomon Codes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sudan, M.

    We present a randomized algorithm which takes as input n distinct points ((x{sub i}, y{sub i})){sup n}{sub i=1} from F x F (where F is a field) and integer parameters t and d and returns a list of all univariate polynomials f over F in the variable x of degree at most d which agree with the given set of points in at least t places (i.e., y{sub i} = f (x{sub i}) for at least t values of i), provided t = {Omega}({radical}nd). The running time is bounded by a polynomial in n. This immediately provides a maximum likelihoodmore » decoding algorithm for Reed Solomon Codes, which works in a setting with a larger number of errors than any previously known algorithm. To the best of our knowledge, this is the first efficient (i.e., polynomial time bounded) algorithm which provides some maximum likelihood decoding for any efficient (i.e., constant or even polynomial rate) code.« less

  9. Elite long jumpers with below the knee prostheses approach the board slower, but take-off more effectively than non-amputee athletes.

    PubMed

    Willwacher, Steffen; Funken, Johannes; Heinrich, Kai; Müller, Ralf; Hobara, Hiroaki; Grabowski, Alena M; Brüggemann, Gert-Peter; Potthast, Wolfgang

    2017-11-22

    The use of technological aids to improve sport performance ('techno doping') and inclusion of Paralympic athletes in Olympic events are matters of ongoing debate. Recently, a long jumper with a below the knee amputation (BKA) achieved jump distances similar to world-class athletes without amputations, using a carbon fibre running-specific prosthesis (RSP). We show that athletes with BKA utilize a different, more effective take-off technique in the long jump, which provided the best athlete with BKA a performance advantage of at least 0.13 m compared to non-amputee athletes. A maximum speed constraint imposed by the use of RSPs would indicate a performance disadvantage for the long jump. We found slower maximum sprinting speeds in athletes with BKA, but did not find a difference in the overall vertical force from both legs of athletes with BKA compared to non-amputees. Slower speeds might originate from intrinsically lower sprinting abilities of athletes with BKA or from more complex adaptions in sprinting mechanics due to the biomechanical and morphological differences induced by RSPs. Our results suggest that due to different movement strategies, athletes with and without BKA should likely compete in separate categories for the long jump.

  10. 49 CFR 192.620 - Alternative maximum allowable operating pressure for certain steel pipelines.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... of a maximum allowable operating pressure based on higher stress levels in the following areas: Take... pipeline at the increased stress level under this section with conventional operation; and (ii) Describe... targeted audience; and (B) Include information about the integrity management activities performed under...

  11. 49 CFR 192.620 - Alternative maximum allowable operating pressure for certain steel pipelines.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... of a maximum allowable operating pressure based on higher stress levels in the following areas: Take... pipeline at the increased stress level under this section with conventional operation; and (ii) Describe... targeted audience; and (B) Include information about the integrity management activities performed under...

  12. 49 CFR 192.620 - Alternative maximum allowable operating pressure for certain steel pipelines.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... of a maximum allowable operating pressure based on higher stress levels in the following areas: Take... pipeline at the increased stress level under this section with conventional operation; and (ii) Describe... targeted audience; and (B) Include information about the integrity management activities performed under...

  13. Estimating the Maximum Magnitude of Induced Earthquakes With Dynamic Rupture Simulations

    NASA Astrophysics Data System (ADS)

    Gilmour, E.; Daub, E. G.

    2017-12-01

    Seismicity in Oklahoma has been sharply increasing as the result of wastewater injection. The earthquakes, thought to be induced from changes in pore pressure due to fluid injection, nucleate along existing faults. Induced earthquakes currently dominate central and eastern United States seismicity (Keranen et al. 2016). Induced earthquakes have only been occurring in the central US for a short time; therefore, too few induced earthquakes have been observed in this region to know their maximum magnitude. The lack of knowledge regarding the maximum magnitude of induced earthquakes means that large uncertainties exist in the seismic hazard for the central United States. While induced earthquakes follow the Gutenberg-Richter relation (van der Elst et al. 2016), it is unclear if there are limits to their magnitudes. An estimate of the maximum magnitude of the induced earthquakes is crucial for understanding their impact on seismic hazard. While other estimates of the maximum magnitude exist, those estimates are observational or statistical, and cannot take into account the possibility of larger events that have not yet been observed. Here, we take a physical approach to studying the maximum magnitude based on dynamic ruptures simulations. We run a suite of two-dimensional ruptures simulations to physically determine how ruptures propagate. The simulations use the known parameters of principle stress orientation and rupture locations. We vary the other unknown parameters of the ruptures simulations to obtain a large number of rupture simulation results reflecting different possible sets of parameters, and use these results to train a neural network to complete the ruptures simulations. Then using a Markov Chain Monte Carlo method to check different combinations of parameters, the trained neural network is used to create synthetic magnitude-frequency distributions to compare to the real earthquake catalog. This method allows us to find sets of parameters that are

  14. The application of a Grey Markov Model to forecasting annual maximum water levels at hydrological stations

    NASA Astrophysics Data System (ADS)

    Dong, Sheng; Chi, Kun; Zhang, Qiyi; Zhang, Xiangdong

    2012-03-01

    Compared with traditional real-time forecasting, this paper proposes a Grey Markov Model (GMM) to forecast the maximum water levels at hydrological stations in the estuary area. The GMM combines the Grey System and Markov theory into a higher precision model. The GMM takes advantage of the Grey System to predict the trend values and uses the Markov theory to forecast fluctuation values, and thus gives forecast results involving two aspects of information. The procedure for forecasting annul maximum water levels with the GMM contains five main steps: 1) establish the GM (1, 1) model based on the data series; 2) estimate the trend values; 3) establish a Markov Model based on relative error series; 4) modify the relative errors caused in step 2, and then obtain the relative errors of the second order estimation; 5) compare the results with measured data and estimate the accuracy. The historical water level records (from 1960 to 1992) at Yuqiao Hydrological Station in the estuary area of the Haihe River near Tianjin, China are utilized to calibrate and verify the proposed model according to the above steps. Every 25 years' data are regarded as a hydro-sequence. Eight groups of simulated results show reasonable agreement between the predicted values and the measured data. The GMM is also applied to the 10 other hydrological stations in the same estuary. The forecast results for all of the hydrological stations are good or acceptable. The feasibility and effectiveness of this new forecasting model have been proved in this paper.

  15. A Tale of Two Types of Perspective Taking: Sex Differences in Spatial Ability.

    PubMed

    Tarampi, Margaret R; Heydari, Nahal; Hegarty, Mary

    2016-11-01

    Sex differences in favor of males have been documented in measures of spatial perspective taking. In this research, we examined whether social factors (i.e., stereotype threat and the inclusion of human figures in tasks) account for these differences. In Experiment 1, we evaluated performance when perspective-taking tests were framed as measuring either spatial or social (empathetic) perspective-taking abilities. In the spatial condition, tasks were framed as measures of spatial ability on which males have an advantage. In the social condition, modified tasks contained human figures and were framed as measures of empathy on which females have an advantage. Results showed a sex difference in favor of males in the spatial condition but not the social condition. Experiments 2 and 3 indicated that both stereotype threat and including human figures contributed to these effects. Results suggest that females may underperform on spatial tests in part because of negative performance expectations and the character of the spatial tests rather than because of actual lack of abilities. © The Author(s) 2016.

  16. Comparison of Maximum Stretch Forces between Femtosecond Laser-Assisted Capsulotomy and Continuous Curvilinear Capsulorhexis

    PubMed Central

    Ichikawa, Kei; Tanaka, Yoshiki; Kato, Yukihito; Horai, Rie; Tamaoki, Akeno; Ichikawa, Kazuo

    2017-01-01

    The current study reports comparing the postoperative mechanical properties of the anterior capsule between femtosecond laser capsulotomy (FLC) and continuous curvilinear capsulorhexis (CCC) of variable size and shape in porcine eyes. All CCCs were created using capsule forceps. Irregular or eccentric CCCs were also created to simulate real cataract surgery. For FLC, capsulotomies 5.3 mm in diameter were created using the LenSx® (Alcon) platform. Fresh porcine eyes were used in all experiments. The edges of the capsule openings were pulled at a constant speed using two L-shaped jigs. Stretch force and distance were recorded over time, and the maximum values in this regard were defined as those that were recorded when the capsule broke. There was no difference in maximum stretch force between CCC and FLC. There were no differences in circularity between FLC and same-sized CCC. However, same-sized CCC did show significantly higher maximum stretch forces than FLC. Teardrop-shaped CCC showed lower maximum stretch forces than same-sized CCC and FLC. Heart-shaped CCC showed lower maximum stretch forces than same-sized CCC. Conclusively, while capsule edge strength after CCC varied depending on size or irregularities, FLC had the advantage of stable maximum stretch forces. PMID:28210504

  17. Comparison of Maximum Stretch Forces between Femtosecond Laser-Assisted Capsulotomy and Continuous Curvilinear Capsulorhexis.

    PubMed

    Takagi, Mari; Kojima, Takashi; Ichikawa, Kei; Tanaka, Yoshiki; Kato, Yukihito; Horai, Rie; Tamaoki, Akeno; Ichikawa, Kazuo

    2017-01-01

    The current study reports comparing the postoperative mechanical properties of the anterior capsule between femtosecond laser capsulotomy (FLC) and continuous curvilinear capsulorhexis (CCC) of variable size and shape in porcine eyes. All CCCs were created using capsule forceps. Irregular or eccentric CCCs were also created to simulate real cataract surgery. For FLC, capsulotomies 5.3 mm in diameter were created using the LenSx® (Alcon) platform. Fresh porcine eyes were used in all experiments. The edges of the capsule openings were pulled at a constant speed using two L-shaped jigs. Stretch force and distance were recorded over time, and the maximum values in this regard were defined as those that were recorded when the capsule broke. There was no difference in maximum stretch force between CCC and FLC. There were no differences in circularity between FLC and same-sized CCC. However, same-sized CCC did show significantly higher maximum stretch forces than FLC. Teardrop-shaped CCC showed lower maximum stretch forces than same-sized CCC and FLC. Heart-shaped CCC showed lower maximum stretch forces than same-sized CCC. Conclusively, while capsule edge strength after CCC varied depending on size or irregularities, FLC had the advantage of stable maximum stretch forces.

  18. Measurement of the Errors of Service Altimeter Installations During Landing-Approach and Take-Off Operations

    NASA Technical Reports Server (NTRS)

    Gracey, William; Jewel, Joseph W., Jr.; Carpenter, Gene T.

    1960-01-01

    The overall errors of the service altimeter installations of a variety of civil transport, military, and general-aviation airplanes have been experimentally determined during normal landing-approach and take-off operations. The average height above the runway at which the data were obtained was about 280 feet for the landings and about 440 feet for the take-offs. An analysis of the data obtained from 196 airplanes during 415 landing approaches and from 70 airplanes during 152 take-offs showed that: 1. The overall error of the altimeter installations in the landing- approach condition had a probable value (50 percent probability) of +/- 36 feet and a maximum probable value (99.7 percent probability) of +/- 159 feet with a bias of +10 feet. 2. The overall error in the take-off condition had a probable value of +/- 47 feet and a maximum probable value of +/- 207 feet with a bias of -33 feet. 3. The overall errors of the military airplanes were generally larger than those of the civil transports in both the landing-approach and take-off conditions. In the landing-approach condition the probable error and the maximum probable error of the military airplanes were +/- 43 and +/- 189 feet, respectively, with a bias of +15 feet, whereas those for the civil transports were +/- 22 and +/- 96 feet, respectively, with a bias of +1 foot. 4. The bias values of the error distributions (+10 feet for the landings and -33 feet for the take-offs) appear to represent a measure of the hysteresis characteristics (after effect and recovery) and friction of the instrument and the pressure lag of the tubing-instrument system.

  19. Home advantage in Turkish professional soccer.

    PubMed

    Seçkin, Aylin; Pollard, Richard

    2008-08-01

    Home advantage is known to play an important role in the outcome of professional soccer games and to vary considerably worldwide. In the Turkish Super League over the last 12 years, 61.5% of the total points gained have been won by the home team, a figure similar to the worldwide average and to the Premier League in England. It is lower (57.7%) for games played between teams from Istanbul and especially high for games involving teams from cities in the more remote and ethnically distinct parts of Turkey (Van and Diyarbakir). Match performance data show that although home teams in Turkey take 26% more shots at goal than away teams, the success rates for shots do not differ. For fouls and disciplinary cards, home and away teams do not differ significantly in Turkey, a finding that differs from games in England, perhaps due to less referee bias.

  20. Sources of Support for Women Taking Professional Programs by Distance Education

    ERIC Educational Resources Information Center

    Cragg, C. E. (Betty); Andrusyszyn, Mary-Anne; Fraser, Joy

    2005-01-01

    Women with multiple roles face many challenges when taking distance education courses in professional programs to achieve credentials or maintain competence. Among these challenges is finding the supports necessary for success as a distance student. As part of a larger study on advantages and stressors identified by such women in distance…

  1. Approximate maximum likelihood decoding of block codes

    NASA Technical Reports Server (NTRS)

    Greenberger, H. J.

    1979-01-01

    Approximate maximum likelihood decoding algorithms, based upon selecting a small set of candidate code words with the aid of the estimated probability of error of each received symbol, can give performance close to optimum with a reasonable amount of computation. By combining the best features of various algorithms and taking care to perform each step as efficiently as possible, a decoding scheme was developed which can decode codes which have better performance than those presently in use and yet not require an unreasonable amount of computation. The discussion of the details and tradeoffs of presently known efficient optimum and near optimum decoding algorithms leads, naturally, to the one which embodies the best features of all of them.

  2. Advantages of robotics in benign gynecologic surgery.

    PubMed

    Truong, Mireille; Kim, Jin Hee; Scheib, Stacey; Patzkowsky, Kristin

    2016-08-01

    The purpose of this article is to review the literature and discuss the advantages of robotics in benign gynecologic surgery. Minimally invasive surgery has become the preferred route over abdominal surgery. The laparoscopic or robotic approach is recommended when vaginal surgery is not feasible. Thus far, robotic gynecologic surgery data have demonstrated feasibility, safety, and equivalent clinical outcomes in comparison with laparoscopy and better clinical outcomes compared with laparotomy. Robotics was developed to overcome challenges of laparoscopy and has led to technological advantages such as improved ergonomics, visualization with three-dimensional capabilities, dexterity and range of motion with instrument articulation, and tremor filtration. To date, applications of robotics in benign gynecology include hysterectomy, myomectomy, endometriosis surgery, sacrocolpopexy, adnexal surgery, tubal reanastomosis, and cerclage. Though further data are needed, robotics may provide additional benefits over other approaches in the obese patient population and in higher complexity cases. Challenges that arose in the earlier adoption stage such as the steep learning curve, costs, and operative times are becoming more optimized with greater experience, with implementation of robotics in high-volume centers and with improved training of surgeons and robotic teams. Robotic laparoendoscopic single-site surgery, albeit still in its infancy where technical advantages compared with laparoscopic single-site surgery are still unclear, may provide a cost-reducing option compared with multiport robotics. The cost may even approach that of laparoscopy while still conferring similar perioperative outcomes. Advances in robotic technology such as the single-site platform and telesurgery, have the potential to revolutionize the field of minimally invasive gynecologic surgery. Higher quality evidence is needed to determine the advantages and disadvantages of robotic surgery in benign

  3. Inequality and redistribution behavior in a give-or-take game

    PubMed Central

    Bechtel, Michael M.; Scheve, Kenneth F.

    2018-01-01

    Political polarization and extremism are widely thought to be driven by the surge in economic inequality in many countries around the world. Understanding why inequality persists depends on knowing the causal effect of inequality on individual behavior. We study how inequality affects redistribution behavior in a randomized “give-or-take” experiment that created equality, advantageous inequality, or disadvantageous inequality between two individuals before offering one of them the opportunity to either take from or give to the other. We estimate the causal effect of inequality in representative samples of German and American citizens (n = 4,966) and establish two main findings. First, individuals imperfectly equalize payoffs: On average, respondents transfer 12% of the available endowments to realize more equal wealth distributions. This means that respondents tolerate a considerable degree of inequality even in a setting in which there are no costs to redistribution. Second, redistribution behavior in response to disadvantageous and advantageous inequality is largely asymmetric: Individuals who take from those who are richer do not also tend to give to those who are poorer, and individuals who give to those who are poorer do not tend to take from those who are richer. These behavioral redistribution types correlate in meaningful ways with support for heavy taxes on the rich and the provision of welfare benefits for the poor. Consequently, it seems difficult to construct a majority coalition willing to back the type of government interventions needed to counter rising inequality. PMID:29555734

  4. Developability assessment of clinical drug products with maximum absorbable doses.

    PubMed

    Ding, Xuan; Rose, John P; Van Gelder, Jan

    2012-05-10

    Maximum absorbable dose refers to the maximum amount of an orally administered drug that can be absorbed in the gastrointestinal tract. Maximum absorbable dose, or D(abs), has proved to be an important parameter for quantifying the absorption potential of drug candidates. The purpose of this work is to validate the use of D(abs) in a developability assessment context, and to establish appropriate protocol and interpretation criteria for this application. Three methods for calculating D(abs) were compared by assessing how well the methods predicted the absorption limit for a set of real clinical candidates. D(abs) was calculated for these clinical candidates by means of a simple equation and two computer simulation programs, GastroPlus and an program developed at Eli Lilly and Company. Results from single dose escalation studies in Phase I clinical trials were analyzed to identify the maximum absorbable doses for these compounds. Compared to the clinical results, the equation and both simulation programs provide conservative estimates of D(abs), but in general D(abs) from the computer simulations are more accurate, which may find obvious advantage for the simulations in developability assessment. Computer simulations also revealed the complex behavior associated with absorption saturation and suggested in most cases that the D(abs) limit is not likely to be achieved in a typical clinical dose range. On the basis of the validation findings, an approach is proposed for assessing absorption potential, and best practices are discussed for the use of D(abs) estimates to inform clinical formulation development strategies. Copyright © 2012 Elsevier B.V. All rights reserved.

  5. Associated petroleum gas utilization in Tomsk Oblast: energy efficiency and tax advantages

    NASA Astrophysics Data System (ADS)

    Vazim, A.; Romanyuk, V.; Ahmadeev, K.; Matveenko, I.

    2015-11-01

    This article deals with oil production companies activities in increasing the utilization volume of associated petroleum gas (APG) in Tomsk Oblast. Cost-effectiveness analysis of associated petroleum gas utilization was carried out using the example of gas engine power station AGP-350 implementation at Yuzhno-Cheremshanskoye field, Tomsk Oblast. Authors calculated the effectiveness taking into account the tax advantages of 2012. The implementation of this facility shows high profitability, the payback period being less than 2 years.

  6. Erich Regener and the ionisation maximum of the atmosphere

    NASA Astrophysics Data System (ADS)

    Carlson, P.; Watson, A. A.

    2014-12-01

    In the 1930s the German physicist Erich Regener (1881-1955) did important work on the measurement of the rate of production of ionisation deep under water and in the atmosphere. Along with one of his students, Georg Pfotzer, he discovered the altitude at which the production of ionisation in the atmosphere reaches a maximum, often, but misleadingly, called the Pfotzer maximum. Regener was one of the first to estimate the energy density of cosmic rays, an estimate that was used by Baade and Zwicky to bolster their postulate that supernovae might be their source. Yet Regener's name is less recognised by present-day cosmic ray physicists than it should be, largely because in 1937 he was forced to take early retirement by the National Socialists as his wife had Jewish ancestors. In this paper we briefly review his work on cosmic rays and recommend an alternative naming of the ionisation maximum. The influence that Regener had on the field through his son, his son-in-law, his grandsons and his students, and through his links with Rutherford's group in Cambridge, is discussed in an appendix. Regener was nominated for the Nobel Prize in Physics by Schrödinger in 1938. He died in 1955 at the age of 73.

  7. Assessing allowable take of migratory birds

    USGS Publications Warehouse

    Runge, M.C.; Sauer, J.R.; Avery, M.L.; Blackwell, B.F.; Koneff, M.D.

    2009-01-01

    Legal removal of migratory birds from the wild occurs for several reasons, including subsistence, sport harvest, damage control, and the pet trade. We argue that harvest theory provides the basis for assessing the impact of authorized take, advance a simplified rendering of harvest theory known as potential biological removal as a useful starting point for assessing take, and demonstrate this approach with a case study of depredation control of black vultures (Coragyps atratus) in Virginia, USA. Based on data from the North American Breeding Bird Survey and other sources, we estimated that the black vulture population in Virginia was 91,190 (95% credible interval = 44,520?212,100) in 2006. Using a simple population model and available estimates of life-history parameters, we estimated the intrinsic rate of growth (rmax) to be in the range 7?14%, with 10.6% a plausible point estimate. For a take program to seek an equilibrium population size on the conservative side of the yield curve, the rate of take needs to be less than that which achieves a maximum sustained yield (0.5 x rmax). Based on the point estimate for rmax and using the lower 60% credible interval for population size to account for uncertainty, these conditions would be met if the take of black vultures in Virginia in 2006 was < 3,533 birds. Based on regular monitoring data, allowable harvest should be adjusted annually to reflect changes in population size. To initiate discussion about how this assessment framework could be related to the laws and regulations that govern authorization of such take, we suggest that the Migratory Bird Treaty Act requires only that take of native migratory birds be sustainable in the long-term, that is, sustained harvest rate should be < rmax. Further, the ratio of desired harvest rate to 0.5 x rmax may be a useful metric for ascertaining the applicability of specific requirements of the National Environmental Protection Act.

  8. How long do centenarians survive? Life expectancy and maximum lifespan.

    PubMed

    Modig, K; Andersson, T; Vaupel, J; Rau, R; Ahlbom, A

    2017-08-01

    The purpose of this study was to explore the pattern of mortality above the age of 100 years. In particular, we aimed to examine whether Scandinavian data support the theory that mortality reaches a plateau at particularly old ages. Whether the maximum length of life increases with time was also investigated. The analyses were based on individual level data on all Swedish and Danish centenarians born from 1870 to 1901; in total 3006 men and 10 963 women were included. Birth cohort-specific probabilities of dying were calculated. Exact ages were used for calculations of maximum length of life. Whether maximum age changed over time was analysed taking into account increases in cohort size. The results confirm that there has not been any improvement in mortality amongst centenarians in the past 30 years and that the current rise in life expectancy is driven by reductions in mortality below the age of 100 years. The death risks seem to reach a plateau of around 50% at the age 103 years for men and 107 years for women. Despite the rising life expectancy, the maximum age does not appear to increase, in particular after accounting for the increasing number of individuals of advanced age. Mortality amongst centenarians is not changing despite improvements at younger ages. An extension of the maximum lifespan and a sizeable extension of life expectancy both require reductions in mortality above the age of 100 years. © 2017 The Association for the Publication of the Journal of Internal Medicine.

  9. Reducing gravity takes the bounce out of running.

    PubMed

    Polet, Delyle T; Schroeder, Ryan T; Bertram, John E A

    2018-02-13

    In gravity below Earth-normal, a person should be able to take higher leaps in running. We asked 10 subjects to run on a treadmill in five levels of simulated reduced gravity and optically tracked centre-of-mass kinematics. Subjects consistently reduced ballistic height compared with running in normal gravity. We explain this trend by considering the vertical take-off velocity (defined as maximum vertical velocity). Energetically optimal gaits should balance the energetic costs of ground-contact collisions (favouring lower take-off velocity), and step frequency penalties such as leg swing work (favouring higher take-off velocity, but less so in reduced gravity). Measured vertical take-off velocity scaled with the square root of gravitational acceleration, following energetic optimality predictions and explaining why ballistic height decreases in lower gravity. The success of work-based costs in predicting this behaviour challenges the notion that gait adaptation in reduced gravity results from an unloading of the stance phase. Only the relationship between take-off velocity and swing cost changes in reduced gravity; the energetic cost of the down-to-up transition for a given vertical take-off velocity does not change with gravity. Because lower gravity allows an elongated swing phase for a given take-off velocity, the motor control system can relax the vertical momentum change in the stance phase, thus reducing ballistic height, without great energetic penalty to leg swing work. Although it may seem counterintuitive, using less 'bouncy' gaits in reduced gravity is a strategy to reduce energetic costs, to which humans seem extremely sensitive. © 2018. Published by The Company of Biologists Ltd.

  10. A pairwise maximum entropy model accurately describes resting-state human brain networks

    PubMed Central

    Watanabe, Takamitsu; Hirose, Satoshi; Wada, Hiroyuki; Imai, Yoshio; Machida, Toru; Shirouzu, Ichiro; Konishi, Seiki; Miyashita, Yasushi; Masuda, Naoki

    2013-01-01

    The resting-state human brain networks underlie fundamental cognitive functions and consist of complex interactions among brain regions. However, the level of complexity of the resting-state networks has not been quantified, which has prevented comprehensive descriptions of the brain activity as an integrative system. Here, we address this issue by demonstrating that a pairwise maximum entropy model, which takes into account region-specific activity rates and pairwise interactions, can be robustly and accurately fitted to resting-state human brain activities obtained by functional magnetic resonance imaging. Furthermore, to validate the approximation of the resting-state networks by the pairwise maximum entropy model, we show that the functional interactions estimated by the pairwise maximum entropy model reflect anatomical connexions more accurately than the conventional functional connectivity method. These findings indicate that a relatively simple statistical model not only captures the structure of the resting-state networks but also provides a possible method to derive physiological information about various large-scale brain networks. PMID:23340410

  11. Taking advantage from phenotype variability in a local animal genetic resource: identification of genomic regions associated with the hairless phenotype in Casertana pigs.

    PubMed

    Schiavo, G; Bertolini, F; Utzeri, V J; Ribani, A; Geraci, C; Santoro, L; Óvilo, C; Fernández, A I; Gallo, M; Fontanesi, L

    2018-04-19

    Casertana is an endangered autochthonous pig breed (raised in south-central Italy) that is considered to be the descendant of the influential Neapolitan pig population that was used to improve British breeds in the 19th century. Casertana pigs are characterized by a typical, almost complete, hairless phenotype, even though a few Casertana pigs are normal haired. In this work, using Illumina PorcineSNP60 BeadChip data, we carried out a genome-wide association study and an F ST analysis with this breed by comparing animals showing the classical hairless phenotype (n = 81) versus pigs classified as haired (n = 15). Combining the results obtained with the two approaches, we identified two significant regions: one on porcine chromosome (SSC) 7 and one on SSC15. The SSC7 region contains the forkhead box N3 (FOXN3) gene, the most plausible candidate gene of this region, considering that mutations in another gene of the same family (forkhead box N1; Foxn1 or FOXN1) are responsible for the nude locus in rodents and alopecia in humans. Another potential candidate gene, rho guanine nucleotide exchange factor 10 (ARHGEF10), is located in the SSC15 region. FOXN3 and ARHGEF10 have been detected as differentially expressed in androgenetic and senescent alopecia respectively. This study on an autochthonous pig breed contributes to shed some light on novel genes potentially involved in hair development and growth and demonstrates that local animal breeds can be valuable genetic resources for disclosing genetic factors affecting unique traits, taking advantage of phenotype variability segregating in small populations. © 2018 Stichting International Foundation for Animal Genetics.

  12. Comparative Advantages in Microelectronics,

    DTIC Science & Technology

    The initial point of departure for analyzing comparative advantages in microelectronics is to make certain explicit assumptions. First, technology...changes conditions but does not determine comparative advantages . Secondly, the entire industrial infrastructure is becoming increasingly abstract...that informatics will profoundly affect the productive infrastructure and the international division of labour.

  13. Strategic advantages of high-rise construction

    NASA Astrophysics Data System (ADS)

    Yaskova, Natalya

    2018-03-01

    Traditional methods to assess the competitiveness of different types of real estate in the context of huge changes of new technological way of life don't provide building solutions that would be correct from a strategic perspective. There are many challenges due to changes in the consumers' behavior in the housing area. A multiplicity of life models, a variety of opportunities and priorities, traditions and new trends in construction should be assessed in terms of prospective benefits in the environment of the emerging new world order. At the same time, the mane discourse of high-rise construction mainly relates to its design features, technical innovations, and architectural accents. We need to clarify the criteria for economic evaluation of high-rise construction in order to provide decisions with clear and quantifiable contexts. The suggested approach to assessing the strategic advantage of high-rise construction and the prospects for capitalization of high-rise buildings poses new challenges for the economy to identify adequate quantitative assessment methods of the high-rise buildings economic efficiency, taking into account all stages of their life cycle.

  14. A reliable, fast and low cost maximum power point tracker for photovoltaic applications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Enrique, J.M.; Andujar, J.M.; Bohorquez, M.A.

    This work presents a new maximum power point tracker system for photovoltaic applications. The developed system is an analog version of the ''P and O-oriented'' algorithm. It maintains its main advantages: simplicity, reliability and easy practical implementation, and avoids its main disadvantages: inaccurateness and relatively slow response. Additionally, the developed system can be implemented in a practical way at a low cost, which means an added value. The system also shows an excellent behavior for very fast variables in incident radiation levels. (author)

  15. Maximum thrust mode evaluation

    NASA Technical Reports Server (NTRS)

    Orme, John S.; Nobbs, Steven G.

    1995-01-01

    Measured reductions in acceleration times which resulted from the application of the F-15 performance seeking control (PSC) maximum thrust mode during the dual-engine test phase is presented as a function of power setting and flight condition. Data were collected at altitudes of 30,000 and 45,000 feet at military and maximum afterburning power settings. The time savings for the supersonic acceleration is less than at subsonic Mach numbers because of the increased modeling and control complexity. In addition, the propulsion system was designed to be optimized at the mid supersonic Mach number range. Recall that even though the engine is at maximum afterburner, PSC does not trim the afterburner for the maximum thrust mode. Subsonically at military power, time to accelerate from Mach 0.6 to 0.95 was cut by between 6 and 8 percent with a single engine application of PSC, and over 14 percent when both engines were optimized. At maximum afterburner, the level of thrust increases were similar in magnitude to the military power results, but because of higher thrust levels at maximum afterburner and higher aircraft drag at supersonic Mach numbers the percentage thrust increase and time to accelerate was less than for the supersonic accelerations. Savings in time to accelerate supersonically at maximum afterburner ranged from 4 to 7 percent. In general, the maximum thrust mode has performed well, demonstrating significant thrust increases at military and maximum afterburner power. Increases of up to 15 percent at typical combat-type flight conditions were identified. Thrust increases of this magnitude could be useful in a combat situation.

  16. Taking advantage of acoustic inhomogeneities in photoacoustic measurements

    NASA Astrophysics Data System (ADS)

    Da Silva, Anabela; Handschin, Charles; Riedinger, Christophe; Piasecki, Julien; Mensah, Serge; Litman, Amélie; Akhouayri, Hassan

    2016-03-01

    Photoacoustic offers promising perspectives in probing and imaging subsurface optically absorbing structures in biological tissues. The optical uence absorbed is partly dissipated into heat accompanied with microdilatations that generate acoustic pressure waves, the intensity which is related to the amount of fluuence absorbed. Hence the photoacoustic signal measured offers access, at least potentially, to a local monitoring of the absorption coefficient, in 3D if tomographic measurements are considered. However, due to both the diffusing and absorbing nature of the surrounding tissues, the major part of the uence is deposited locally at the periphery of the tissue, generating an intense acoustic pressure wave that may hide relevant photoacoustic signals. Experimental strategies have been developed in order to measure exclusively the photoacoustic waves generated by the structure of interest (orthogonal illumination and detection). Temporal or more sophisticated filters (wavelets) can also be applied. However, the measurement of this primary acoustic wave carries a lot of information about the acoustically inhomogeneous nature of the medium. We propose a protocol that includes the processing of this primary intense acoustic wave, leading to the quantification of the surrounding medium sound speed, and, if appropriate to an acoustical parametric image of the heterogeneities. This information is then included as prior knowledge in the photoacoustic reconstruction scheme to improve the localization and quantification.

  17. Quasi-independence, fitness, and advantageousness.

    PubMed

    Brosnan, Kevin

    2009-09-01

    I argue that the idea of 'quasi-independence' [Lewontin, R. C. (1978). Adaptation. Scientific American, 239(3), 212-230] cannot be understood without attending to the distinction between fitness and advantageousness [Sober, E. (1993). Philosophy of biology. Boulder: Westview Press]. Natural selection increases the frequency of fitter traits, not necessarily of advantageous ones. A positive correlation between an advantageous trait and a disadvantageous one may prevent the advantageous trait from evolving. The quasi-independence criterion is aimed at specifying the conditions under which advantageous traits will evolve by natural selection in this type of situation. Contrary to what others have argued [Sterelny, K. (1992). Evolutionary explanations of human behavior. Australian Journal of Philosophy, 70(2), 156-172, and Sterelny, K., & Griffiths, P. (1999). Sex and death. Chicago: University of Chicago Press], these conditions must involve a precise quantitative measure of (a) the extent to which advantageous traits are beneficial, and (b) the degree to which they are correlated with other traits. Driscoll (2004) [Driscoll, C. (2004). Can behaviors be adaptations? Philosophy of Science, 71, 16-35] recognizes the need for such a measure, but I argue that she does not provide the correct formulation. The account of quasi-independence that I offer clarifies this point.

  18. Technical and cost advantages of silicon carbide telescopes for small-satellite imaging applications

    NASA Astrophysics Data System (ADS)

    Kasunic, Keith J.; Aikens, Dave; Szwabowski, Dean; Ragan, Chip; Tinker, Flemming

    2017-09-01

    Small satellites ("SmallSats") are a growing segment of the Earth imaging and remote sensing market. Designed to be relatively low cost and with performance tailored to specific end-use applications, they are driving changes in optical telescope assembly (OTA) requirements. OTAs implemented in silicon carbide (SiC) provide performance advantages for space applications but have been predominately limited to large programs. A new generation of lightweight and thermally-stable designs is becoming commercially available, expanding the application of SiC to small satellites. This paper reviews the cost and technical advantages of an OTA designed using SiC for small satellite platforms. Taking into account faceplate fabrication quilting and surface distortion after gravity release, an optimized open-back SiC design with a lightweighting of 70% for a 125-mm SmallSat-class primary mirror has an estimated mass area density of 2.8 kg/m2 and an aspect ratio of 40:1. In addition, the thermally-induced surface error of such optimized designs is estimated at λ/150 RMS per watt of absorbed power. Cost advantages of SiC include reductions in launch mass, thermal-management infrastructure, and manufacturing time based on allowable assembly tolerances.

  19. A symbiotic gas exchange between bioreactors enhances microalgal biomass and lipid productivities: taking advantage of complementary nutritional modes.

    PubMed

    Santos, C A; Ferreira, M E; da Silva, T Lopes; Gouveia, L; Novais, J M; Reis, A

    2011-08-01

    This paper describes the association of two bioreactors: one photoautotrophic and the other heterotrophic, connected by the gas phase and allowing an exchange of O(2) and CO(2) gases between them, benefiting from a symbiotic effect. The association of two bioreactors was proposed with the aim of improving the microalgae oil productivity for biodiesel production. The outlet gas flow from the autotrophic (O(2) enriched) bioreactor was used as the inlet gas flow for the heterotrophic bioreactor. In parallel, the outlet gas flow from another heterotrophic (CO(2) enriched) bioreactor was used as the inlet gas flow for the autotrophic bioreactor. Aside from using the air supplied from the auto- and hetero-trophic bioreactors as controls, one mixotrophic bioreactor was also studied and used as a model, for its claimed advantage of CO(2) and organic carbon being simultaneously assimilated. The microalga Chlorella protothecoides was chosen as a model due to its ability to grow under different nutritional modes (auto, hetero, and mixotrophic), and its ability to attain a high biomass productivity and lipid content, suitable for biodiesel production. The comparison between heterotrophic, autotrophic, and mixotrophic Chlorella protothecoides growth for lipid production revealed that heterotrophic growth achieved the highest biomass productivity and lipid content (>22%), and furthermore showed that these lipids had the most suitable fatty acid profile in order to produce high quality biodiesel. Both associations showed a higher biomass productivity (10-20%), when comparing the two separately operated bioreactors (controls) which occurred on the fourth day. A more remarkable result would have been seen if in actuality the two bioreactors had been inter-connected in a closed loop. The biomass productivity gain would have been 30% and the lipid productivity gain would have been 100%, as seen by comparing the productivities of the symbiotic assemblage with the sum of the two

  20. Extracting Maximum Total Water Levels from Video "Brightest" Images

    NASA Astrophysics Data System (ADS)

    Brown, J. A.; Holman, R. A.; Stockdon, H. F.; Plant, N. G.; Long, J.; Brodie, K.

    2016-02-01

    An important parameter for predicting storm-induced coastal change is the maximum total water level (TWL). Most studies estimate the TWL as the sum of slowly varying water levels, including tides and storm surge, and the extreme runup parameter R2%, which includes wave setup and swash motions over minutes to seconds. Typically, R2% is measured using video remote sensing data, where cross-shore timestacks of pixel intensity are digitized to extract the horizontal runup timeseries. However, this technique must be repeated at multiple alongshore locations to resolve alongshore variability, and can be tedious and time consuming. We seek an efficient, video-based approach that yields a synoptic estimate of TWL that accounts for alongshore variability and can be applied during storms. In this work, the use of a video product termed the "brightest" image is tested; this represents the highest intensity of each pixel captured during a 10-minute collection period. Image filtering and edge detection techniques are applied to automatically determine the shoreward edge of the brightest region (i.e., the swash zone) at each alongshore pixel. The edge represents the horizontal position of the maximum TWL along the beach during the collection period, and is converted to vertical elevations using measured beach topography. This technique is evaluated using video and topographic data collected every half-hour at Duck, NC, during differing hydrodynamic conditions. Relationships between the maximum TWL estimates from the brightest images and various runup statistics computed using concurrent runup timestacks are examined, and errors associated with mapping the horizontal results to elevations are discussed. This technique is invaluable, as it can be used to routinely estimate maximum TWLs along a coastline from a single brightest image product, and provides a means for examining alongshore variability of TWLs at high alongshore resolution. These advantages will be useful in

  1. REMARKS ON THE MAXIMUM ENTROPY METHOD APPLIED TO FINITE TEMPERATURE LATTICE QCD.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    UMEDA, T.; MATSUFURU, H.

    2005-07-25

    We make remarks on the Maximum Entropy Method (MEM) for studies of the spectral function of hadronic correlators in finite temperature lattice QCD. We discuss the virtues and subtlety of MEM in the cases that one does not have enough number of data points such as at finite temperature. Taking these points into account, we suggest several tests which one should examine to keep the reliability for the results, and also apply them using mock and lattice QCD data.

  2. Mechanistic Basis of Cocrystal Dissolution Advantage.

    PubMed

    Cao, Fengjuan; Amidon, Gordon L; Rodríguez-Hornedo, Naír; Amidon, Gregory E

    2018-01-01

    Current interest in cocrystal development resides in the advantages that the cocrystal may have in solubility and dissolution compared with the parent drug. This work provides a mechanistic analysis and comparison of the dissolution behavior of carbamazepine (CBZ) and its 2 cocrystals, carbamazepine-saccharin (CBZ-SAC) and carbamazepine-salicylic acid (CBZ-SLC) under the influence of pH and micellar solubilization. A simple mathematical equation is derived based on the mass transport analyses to describe the dissolution advantage of cocrystals. The dissolution advantage is the ratio of the cocrystal flux to drug flux and is defined as the solubility advantage (cocrystal to drug solubility ratio) times the diffusivity advantage (cocrystal to drug diffusivity ratio). In this work, the effective diffusivity of CBZ in the presence of surfactant was determined to be different and less than those of the cocrystals. The higher effective diffusivity of drug from the dissolved cocrystals, the diffusivity advantage, can impart a dissolution advantage to cocrystals with lower solubility than the parent drug while still maintaining thermodynamic stability. Dissolution conditions where cocrystals can display both thermodynamic stability and a dissolution advantage can be obtained from the mass transport models, and this information is useful for both cocrystal selection and formulation development. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  3. Robustness of the sequential lineup advantage.

    PubMed

    Gronlund, Scott D; Carlson, Curt A; Dailey, Sarah B; Goodsell, Charles A

    2009-06-01

    A growing movement in the United States and around the world involves promoting the advantages of conducting an eyewitness lineup in a sequential manner. We conducted a large study (N = 2,529) that included 24 comparisons of sequential versus simultaneous lineups. A liberal statistical criterion revealed only 2 significant sequential lineup advantages and 3 significant simultaneous advantages. Both sequential advantages occurred when the good photograph of the guilty suspect or either innocent suspect was in the fifth position in the sequential lineup; all 3 simultaneous advantages occurred when the poorer quality photograph of the guilty suspect or either innocent suspect was in the second position. Adjusting the statistical criterion to control for the multiple tests (.05/24) revealed no significant sequential advantages. Moreover, despite finding more conservative overall choosing for the sequential lineup, no support was found for the proposal that a sequential advantage was due to that conservative criterion shift. Unless lineups with particular characteristics predominate in the real world, there appears to be no strong preference for conducting lineups in either a sequential or a simultaneous manner. (PsycINFO Database Record (c) 2009 APA, all rights reserved).

  4. Airmen: Delivering Decision Advantage

    DTIC Science & Technology

    2012-12-01

    Senior Leader Perspective November–December 2012 Air & Space Power Journal | 4 ISR Focus Airmen Delivering Decision Advantage Lt Gen Larry D. James...Air Force, the joint war fighter, and our nation. Our mission, in defense of America’s interests, is to enable de- cision advantage by operating...integrated, cross-domain ISR capabilities with joint, national, and international partners. Our Air Force ISR vi- sion is to be the preeminent ISR

  5. Health insurance take-up by the near-elderly.

    PubMed

    Buchmueller, Thomas C; Ohri, Sabina

    2006-12-01

    To examine the effect of price on the demand for health insurance by early retirees between the ages of 55 and 64. Administrative health plan enrollment data from a medium-sized U.S. employer. The analysis takes advantage of a natural experiment created by the firm's health insurance contribution policy. The amount the firm contributes toward retiree health insurance coverage depends on when a person retired and her years of service at that date. As a result of this policy, there is considerable variation in out-of-pocket premiums faced by individuals in the data. This variation is independent of the nonprice attributes of the health insurance plans offered and is plausibly exogenous to individual characteristics that are likely to affect the demand for insurance. A probit model is used to estimate the decision to take-up employer-sponsored health insurance by early retirees between the ages of 55 and 64. Demand for insurance is measured as a function of out-of-pocket premiums and a set of individual characteristics. We find that price has a small but statistically significant effect on the decision to take up coverage. Estimated price elasticities range from -0.10 to -0.16, depending on the sample. The implied elasticities are comparable with results found in previous studies using very different data. Our estimates indicate that policy proposals for a Medicare buy-in or a nongroup tax credit will have a modest impact on take-up rates of near-elderly retirees.

  6. Maximum Entropy Production Modeling of Evapotranspiration Partitioning on Heterogeneous Terrain and Canopy Cover: advantages and limitations.

    NASA Astrophysics Data System (ADS)

    Gutierrez-Jurado, H. A.; Guan, H.; Wang, J.; Wang, H.; Bras, R. L.; Simmons, C. T.

    2015-12-01

    Quantification of evapotranspiration (ET) and its partition over regions of heterogeneous topography and canopy poses a challenge using traditional approaches. In this study, we report the results of a novel field experiment design guided by the Maximum Entropy Production model of ET (MEP-ET), formulated for estimating evaporation and transpiration from homogeneous soil and canopy. A catchment with complex terrain and patchy vegetation in South Australia was instrumented to measure temperature, humidity and net radiation at soil and canopy surfaces. Performance of the MEP-ET model to quantify transpiration and soil evaporation was evaluated during wet and dry conditions with independently and directly measured transpiration from sapflow and soil evaporation using the Bowen Ratio Energy Balance (BREB). MEP-ET transpiration shows remarkable agreement with that obtained through sapflow measurements during wet conditions, but consistently overestimates the flux during dry periods. However, an additional term introduced to the original MEP-ET model accounting for higher stomatal regulation during dry spells, based on differences between leaf and air vapor pressure deficits and temperatures, significantly improves the model performance. On the other hand, MEP-ET soil evaporation is in good agreement with that from BREB regardless of moisture conditions. The experimental design allows a plot and tree scale quantification of evaporation and transpiration respectively. This study confirms for the first time that the MEP-ET originally developed for homogeneous open bare soil and closed canopy can be used for modeling ET over heterogeneous land surfaces. Furthermore, we show that with the addition of an empirical function simulating the plants ability to regulate transpiration, and based on the same measurements of temperature and humidity, the method can produce reliable estimates of ET during both wet and dry conditions without compromising its parsimony.

  7. Aerodynamic consequences of wing morphing during emulated take-off and gliding in birds.

    PubMed

    Klaassen van Oorschot, Brett; Mistick, Emily A; Tobalske, Bret W

    2016-10-01

    Birds morph their wings during a single wingbeat, across flight speeds and among flight modes. Such morphing may allow them to maximize aerodynamic performance, but this assumption remains largely untested. We tested the aerodynamic performance of swept and extended wing postures of 13 raptor species in three families (Accipitridae, Falconidae and Strigidae) using a propeller model to emulate mid-downstroke of flapping during take-off and a wind tunnel to emulate gliding. Based on previous research, we hypothesized that (1) during flapping, wing posture would not affect maximum ratios of vertical and horizontal force coefficients (C V :C H ), and that (2) extended wings would have higher maximum C V :C H when gliding. Contrary to each hypothesis, during flapping, extended wings had, on average, 31% higher maximum C V :C H ratios and 23% higher C V than swept wings across all biologically relevant attack angles (α), and, during gliding, maximum C V :C H ratios were similar for the two postures. Swept wings had 11% higher C V than extended wings in gliding flight, suggesting flow conditions around these flexed raptor wings may be different from those in previous studies of swifts (Apodidae). Phylogenetic affiliation was a poor predictor of wing performance, due in part to high intrafamilial variation. Mass was only significantly correlated with extended wing performance during gliding. We conclude that wing shape has a greater effect on force per unit wing area during flapping at low advance ratio, such as take-off, than during gliding. © 2016. Published by The Company of Biologists Ltd.

  8. Probable Maximum Precipitation in the U.S. Pacific Northwest in a Changing Climate

    NASA Astrophysics Data System (ADS)

    Chen, Xiaodong; Hossain, Faisal; Leung, L. Ruby

    2017-11-01

    The safety of large and aging water infrastructures is gaining attention in water management given the accelerated rate of change in landscape, climate, and society. In current engineering practice, such safety is ensured by the design of infrastructure for the Probable Maximum Precipitation (PMP). Recently, several numerical modeling approaches have been proposed to modernize the conventional and ad hoc PMP estimation approach. However, the underlying physics have not been fully investigated and thus differing PMP estimates are sometimes obtained without physics-based interpretations. In this study, we present a hybrid approach that takes advantage of both traditional engineering practice and modern climate science to estimate PMP for current and future climate conditions. The traditional PMP approach is modified and applied to five statistically downscaled CMIP5 model outputs, producing an ensemble of PMP estimates in the Pacific Northwest (PNW) during the historical (1970-2016) and future (2050-2099) time periods. The hybrid approach produced consistent historical PMP estimates as the traditional estimates. PMP in the PNW will increase by 50% ± 30% of the current design PMP by 2099 under the RCP8.5 scenario. Most of the increase is caused by warming, which mainly affects moisture availability through increased sea surface temperature, with minor contributions from changes in storm efficiency in the future. Moist track change tends to reduce the future PMP. Compared with extreme precipitation, PMP exhibits higher internal variability. Thus, long-time records of high-quality data in both precipitation and related meteorological fields (temperature, wind fields) are required to reduce uncertainties in the ensemble PMP estimates.

  9. Probable Maximum Precipitation in the U.S. Pacific Northwest in a Changing Climate

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chen, Xiaodong; Hossain, Faisal; Leung, Lai-Yung

    2017-12-22

    The safety of large and aging water infrastructures is gaining attention in water management given the accelerated rate of change in landscape, climate and society. In current engineering practice, such safety is ensured by the design of infrastructure for the Probable Maximum Precipitation (PMP). Recently, several physics-based numerical modeling approaches have been proposed to modernize the conventional and ad hoc PMP estimation approach. However, the underlying physics has not been investigated and thus differing PMP estimates are obtained without clarity on their interpretation. In this study, we present a hybrid approach that takes advantage of both traditional engineering wisdom andmore » modern climate science to estimate PMP for current and future climate conditions. The traditional PMP approach is improved and applied to outputs from an ensemble of five CMIP5 models. This hybrid approach is applied in the Pacific Northwest (PNW) to produce ensemble PMP estimation for the historical (1970-2016) and future (2050-2099) time periods. The new historical PMP estimates are verified by comparing them with the traditional estimates. PMP in the PNW will increase by 50% of the current level by 2099 under the RCP8.5 scenario. Most of the increase is caused by warming, which mainly affects moisture availability, with minor contributions from changes in storm efficiency in the future. Moist track change tends to reduce the future PMP. Compared with extreme precipitation, ensemble PMP exhibits higher internal variation. Thus high-quality data of both precipitation and related meteorological fields (temperature, wind fields) are required to reduce uncertainties in the ensemble PMP estimates.« less

  10. Home advantage in retractable-roof baseball stadia.

    PubMed

    Romanowich, Paul

    2012-10-01

    This study examined whether the home advantage varies for open-air, domed, or retractable-roof baseball stadia, and whether having the roof open or closed affects the home advantage in retractable-roof baseball stadia. Data from Major League Baseball (MLB) games played between 2001 and 2009 were analyzed for whether or not the presence of a home-advantage was dependent on the type of home stadium used. Home advantage was robust for all three types of stadia. A significant effect of stadium type on home advantage was found, with a greater home advantage for teams playing home games in domed stadia relative to open-air stadia, replicating a previous study. There was a greater home advantage for teams playing home games in domed stadia relative to retractable-roof stadia. No other differences in the home advantage were found; results are discussed in terms of familiarity with the facility.

  11. Active impulsive noise control using maximum correntropy with adaptive kernel size

    NASA Astrophysics Data System (ADS)

    Lu, Lu; Zhao, Haiquan

    2017-03-01

    The active noise control (ANC) based on the principle of superposition is an attractive method to attenuate the noise signals. However, the impulsive noise in the ANC systems will degrade the performance of the controller. In this paper, a filtered-x recursive maximum correntropy (FxRMC) algorithm is proposed based on the maximum correntropy criterion (MCC) to reduce the effect of outliers. The proposed FxRMC algorithm does not requires any priori information of the noise characteristics and outperforms the filtered-x least mean square (FxLMS) algorithm for impulsive noise. Meanwhile, in order to adjust the kernel size of FxRMC algorithm online, a recursive approach is proposed through taking into account the past estimates of error signals over a sliding window. Simulation and experimental results in the context of active impulsive noise control demonstrate that the proposed algorithms achieve much better performance than the existing algorithms in various noise environments.

  12. Cosmic shear measurement with maximum likelihood and maximum a posteriori inference

    NASA Astrophysics Data System (ADS)

    Hall, Alex; Taylor, Andy

    2017-06-01

    We investigate the problem of noise bias in maximum likelihood and maximum a posteriori estimators for cosmic shear. We derive the leading and next-to-leading order biases and compute them in the context of galaxy ellipticity measurements, extending previous work on maximum likelihood inference for weak lensing. We show that a large part of the bias on these point estimators can be removed using information already contained in the likelihood when a galaxy model is specified, without the need for external calibration. We test these bias-corrected estimators on simulated galaxy images similar to those expected from planned space-based weak lensing surveys, with promising results. We find that the introduction of an intrinsic shape prior can help with mitigation of noise bias, such that the maximum a posteriori estimate can be made less biased than the maximum likelihood estimate. Second-order terms offer a check on the convergence of the estimators, but are largely subdominant. We show how biases propagate to shear estimates, demonstrating in our simple set-up that shear biases can be reduced by orders of magnitude and potentially to within the requirements of planned space-based surveys at mild signal-to-noise ratio. We find that second-order terms can exhibit significant cancellations at low signal-to-noise ratio when Gaussian noise is assumed, which has implications for inferring the performance of shear-measurement algorithms from simplified simulations. We discuss the viability of our point estimators as tools for lensing inference, arguing that they allow for the robust measurement of ellipticity and shear.

  13. The epoch state navigation filter. [for maximum likelihood estimates of position and velocity vectors

    NASA Technical Reports Server (NTRS)

    Battin, R. H.; Croopnick, S. R.; Edwards, J. A.

    1977-01-01

    The formulation of a recursive maximum likelihood navigation system employing reference position and velocity vectors as state variables is presented. Convenient forms of the required variational equations of motion are developed together with an explicit form of the associated state transition matrix needed to refer measurement data from the measurement time to the epoch time. Computational advantages accrue from this design in that the usual forward extrapolation of the covariance matrix of estimation errors can be avoided without incurring unacceptable system errors. Simulation data for earth orbiting satellites are provided to substantiate this assertion.

  14. 20 CFR 228.14 - Family maximum.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false Family maximum. 228.14 Section 228.14... SURVIVOR ANNUITIES The Tier I Annuity Component § 228.14 Family maximum. (a) Family maximum defined. Under... person's earnings record is limited. This limited amount is called the family maximum. The family maximum...

  15. 20 CFR 228.14 - Family maximum.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Family maximum. 228.14 Section 228.14... SURVIVOR ANNUITIES The Tier I Annuity Component § 228.14 Family maximum. (a) Family maximum defined. Under... person's earnings record is limited. This limited amount is called the family maximum. The family maximum...

  16. LensEnt2: Maximum-entropy weak lens reconstruction

    NASA Astrophysics Data System (ADS)

    Marshall, P. J.; Hobson, M. P.; Gull, S. F.; Bridle, S. L.

    2013-08-01

    LensEnt2 is a maximum entropy reconstructor of weak lensing mass maps. The method takes each galaxy shape as an independent estimator of the reduced shear field and incorporates an intrinsic smoothness, determined by Bayesian methods, into the reconstruction. The uncertainties from both the intrinsic distribution of galaxy shapes and galaxy shape estimation are carried through to the final mass reconstruction, and the mass within arbitrarily shaped apertures are calculated with corresponding uncertainties. The input is a galaxy ellipticity catalog with each measured galaxy shape treated as a noisy tracer of the reduced shear field, which is inferred on a fine pixel grid assuming positivity, and smoothness on scales of w arcsec where w is an input parameter. The ICF width w can be chosen by computing the evidence for it.

  17. 40 CFR 1042.140 - Maximum engine power, displacement, power density, and maximum in-use engine speed.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 34 2012-07-01 2012-07-01 false Maximum engine power, displacement... Maximum engine power, displacement, power density, and maximum in-use engine speed. This section describes how to determine the maximum engine power, displacement, and power density of an engine for the...

  18. 40 CFR 1042.140 - Maximum engine power, displacement, power density, and maximum in-use engine speed.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Maximum engine power, displacement... Maximum engine power, displacement, power density, and maximum in-use engine speed. This section describes how to determine the maximum engine power, displacement, and power density of an engine for the...

  19. Maximum margin semi-supervised learning with irrelevant data.

    PubMed

    Yang, Haiqin; Huang, Kaizhu; King, Irwin; Lyu, Michael R

    2015-10-01

    Semi-supervised learning (SSL) is a typical learning paradigms training a model from both labeled and unlabeled data. The traditional SSL models usually assume unlabeled data are relevant to the labeled data, i.e., following the same distributions of the targeted labeled data. In this paper, we address a different, yet formidable scenario in semi-supervised classification, where the unlabeled data may contain irrelevant data to the labeled data. To tackle this problem, we develop a maximum margin model, named tri-class support vector machine (3C-SVM), to utilize the available training data, while seeking a hyperplane for separating the targeted data well. Our 3C-SVM exhibits several characteristics and advantages. First, it does not need any prior knowledge and explicit assumption on the data relatedness. On the contrary, it can relieve the effect of irrelevant unlabeled data based on the logistic principle and maximum entropy principle. That is, 3C-SVM approaches an ideal classifier. This classifier relies heavily on labeled data and is confident on the relevant data lying far away from the decision hyperplane, while maximally ignoring the irrelevant data, which are hardly distinguished. Second, theoretical analysis is provided to prove that in what condition, the irrelevant data can help to seek the hyperplane. Third, 3C-SVM is a generalized model that unifies several popular maximum margin models, including standard SVMs, Semi-supervised SVMs (S(3)VMs), and SVMs learned from the universum (U-SVMs) as its special cases. More importantly, we deploy a concave-convex produce to solve the proposed 3C-SVM, transforming the original mixed integer programming, to a semi-definite programming relaxation, and finally to a sequence of quadratic programming subproblems, which yields the same worst case time complexity as that of S(3)VMs. Finally, we demonstrate the effectiveness and efficiency of our proposed 3C-SVM through systematical experimental comparisons. Copyright

  20. Health Insurance Take-up by the Near-Elderly

    PubMed Central

    Buchmueller, Thomas C; Ohri, Sabina

    2006-01-01

    Objective To examine the effect of price on the demand for health insurance by early retirees between the ages of 55 and 64. Data Source Administrative health plan enrollment data from a medium-sized U.S. employer. Study Design The analysis takes advantage of a natural experiment created by the firm's health insurance contribution policy. The amount the firm contributes toward retiree health insurance coverage depends on when a person retired and her years of service at that date. As a result of this policy, there is considerable variation in out-of-pocket premiums faced by individuals in the data. This variation is independent of the nonprice attributes of the health insurance plans offered and is plausibly exogenous to individual characteristics that are likely to affect the demand for insurance. A probit model is used to estimate the decision to take-up employer-sponsored health insurance by early retirees between the ages of 55 and 64. Demand for insurance is measured as a function of out-of-pocket premiums and a set of individual characteristics. Principal Findings We find that price has a small but statistically significant effect on the decision to take up coverage. Estimated price elasticities range from −0.10 to −0.16, depending on the sample. Conclusions The implied elasticities are comparable with results found in previous studies using very different data. Our estimates indicate that policy proposals for a Medicare buy-in or a nongroup tax credit will have a modest impact on take-up rates of near-elderly retirees. PMID:17116109

  1. Maximum a posteriori resampling of noisy, spatially correlated data

    NASA Astrophysics Data System (ADS)

    Goff, John A.; Jenkins, Chris; Calder, Brian

    2006-08-01

    In any geologic application, noisy data are sources of consternation for researchers, inhibiting interpretability and marring images with unsightly and unrealistic artifacts. Filtering is the typical solution to dealing with noisy data. However, filtering commonly suffers from ad hoc (i.e., uncalibrated, ungoverned) application. We present here an alternative to filtering: a newly developed method for correcting noise in data by finding the "best" value given available information. The motivating rationale is that data points that are close to each other in space cannot differ by "too much," where "too much" is governed by the field covariance. Data with large uncertainties will frequently violate this condition and therefore ought to be corrected, or "resampled." Our solution for resampling is determined by the maximum of the a posteriori density function defined by the intersection of (1) the data error probability density function (pdf) and (2) the conditional pdf, determined by the geostatistical kriging algorithm applied to proximal data values. A maximum a posteriori solution can be computed sequentially going through all the data, but the solution depends on the order in which the data are examined. We approximate the global a posteriori solution by randomizing this order and taking the average. A test with a synthetic data set sampled from a known field demonstrates quantitatively and qualitatively the improvement provided by the maximum a posteriori resampling algorithm. The method is also applied to three marine geology/geophysics data examples, demonstrating the viability of the method for diverse applications: (1) three generations of bathymetric data on the New Jersey shelf with disparate data uncertainties; (2) mean grain size data from the Adriatic Sea, which is a combination of both analytic (low uncertainty) and word-based (higher uncertainty) sources; and (3) side-scan backscatter data from the Martha's Vineyard Coastal Observatory which are, as

  2. 48 CFR 42.1106 - Reporting requirements.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... that information essential to Government needs and shall take maximum advantage of data output... contractor's report-preparation system or by individual review of each report. (c) The contract...

  3. Text Summarization Model based on Maximum Coverage Problem and its Variant

    NASA Astrophysics Data System (ADS)

    Takamura, Hiroya; Okumura, Manabu

    We discuss text summarization in terms of maximum coverage problem and its variant. To solve the optimization problem, we applied some decoding algorithms including the ones never used in this summarization formulation, such as a greedy algorithm with performance guarantee, a randomized algorithm, and a branch-and-bound method. We conduct comparative experiments. On the basis of the experimental results, we also augment the summarization model so that it takes into account the relevance to the document cluster. Through experiments, we showed that the augmented model is at least comparable to the best-performing method of DUC'04.

  4. Maximum correntropy square-root cubature Kalman filter with application to SINS/GPS integrated systems.

    PubMed

    Liu, Xi; Qu, Hua; Zhao, Jihong; Yue, Pengcheng

    2018-05-31

    For a nonlinear system, the cubature Kalman filter (CKF) and its square-root version are useful methods to solve the state estimation problems, and both can obtain good performance in Gaussian noises. However, their performances often degrade significantly in the face of non-Gaussian noises, particularly when the measurements are contaminated by some heavy-tailed impulsive noises. By utilizing the maximum correntropy criterion (MCC) to improve the robust performance instead of traditional minimum mean square error (MMSE) criterion, a new square-root nonlinear filter is proposed in this study, named as the maximum correntropy square-root cubature Kalman filter (MCSCKF). The new filter not only retains the advantage of square-root cubature Kalman filter (SCKF), but also exhibits robust performance against heavy-tailed non-Gaussian noises. A judgment condition that avoids numerical problem is also given. The results of two illustrative examples, especially the SINS/GPS integrated systems, demonstrate the desirable performance of the proposed filter. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

  5. Maximum Acceleration Recording Circuit

    NASA Technical Reports Server (NTRS)

    Bozeman, Richard J., Jr.

    1995-01-01

    Coarsely digitized maximum levels recorded in blown fuses. Circuit feeds power to accelerometer and makes nonvolatile record of maximum level to which output of accelerometer rises during measurement interval. In comparison with inertia-type single-preset-trip-point mechanical maximum-acceleration-recording devices, circuit weighs less, occupies less space, and records accelerations within narrower bands of uncertainty. In comparison with prior electronic data-acquisition systems designed for same purpose, circuit simpler, less bulky, consumes less power, costs and analysis of data recorded in magnetic or electronic memory devices. Circuit used, for example, to record accelerations to which commodities subjected during transportation on trucks.

  6. Advantageous Inequity Aversion Does Not Always Exist: The Role of Determining Allocations Modulates Preferences for Advantageous Inequity.

    PubMed

    Li, Ou; Xu, Fuming; Wang, Lei

    2018-01-01

    Previous studies have shown that people would like to sacrifice benefits to themselves in order to avoid inequitable outcomes, not only when they receive less than others (disadvantageous inequity aversion) but also when they receive more (advantageous inequity aversion). This feature is captured by the theory of inequity aversion. The present study was inspired by what appears to be asymmetry in the research paradigm toward advantageous inequity aversion. Specifically, studies that supported the existence of advantageous inequity aversion always relied on the paradigm in which participants can determine allocations. Thus, it is interesting to know what would occur if participants could not determine allocations or simply passed judgment on predetermined allocations. To address this, a behavioral experiment ( N = 118) and a skin conductance response (SCR) experiment ( N = 29) were adopted to compare participants' preferences for advantageous inequity directly when allocations were determined and when allocations were predetermined in an allocating task. In the determined condition, participants could divide by themselves a sum of money between themselves and a matched person, whereas in the predetermined condition, they could simply indicate their satisfaction with an equivalent program-generated allocation. It was found that, compared with those in the determined condition, participants in the predetermined condition behaved as if they liked the advantageous inequity and equity to the same degree (Experiment One) and that the SCRs elicited by advantageous inequity had no differences from those elicited by equity, suggesting that participants did not feel negatively toward advantageous inequity in this situation (Experiment Two). The present study provided mutual corroboration (behavioral and electrophysiological data) to document that advantageous inequity aversion may differ as a function of the individual's role in determining allocations, and it would disappear

  7. Home advantage in Greek football.

    PubMed

    Armatas, Vasilis; Pollard, Richard

    2014-01-01

    Home advantage as it relates to team performance at football was examined in Superleague Greece using nine seasons of game-by-game performance data, a total of 2160 matches. After adjusting for team ability and annual fluctuations in home advantage, there were significant differences between teams. Previous findings regarding the role of territorial protection were strengthened by the fact that home advantage was above average for the team from Xanthi (P =0.015), while lower for teams from the capital city Athens (P =0.008). There were differences between home and away teams in the incidence of most of the 13 within-game match variables, but associated effect sizes were only moderate. In contrast, outcome ratios derived from these variables, and measuring shot success, had negligible effect sizes. This supported a previous finding that home and away teams differed in the incidence of on-the-ball behaviours, but not in their outcomes. By far the most important predictor of home advantage, as measured by goal difference, was the difference between home and away teams in terms of kicked shots from inside the penalty area. Other types of shots had little effect on the final score. The absence of a running track between spectators and the playing field was also a significant predictor of goal difference, worth an average of 0.102 goals per game to the home team. Travel distance did not affect home advantage.

  8. Home advantage in high-level volleyball varies according to set number.

    PubMed

    Marcelino, Rui; Mesquita, Isabel; Palao Andrés, José Manuel; Sampaio, Jaime

    2009-01-01

    The aim of the present study was to identify the probability of winning each Volleyball set according to game location (home, away). Archival data was obtained from 275 sets in the 2005 Men's Senior World League and 65,949 actions were analysed. Set result (win, loss), game location (home, away), set number (first, second, third, fourth and fifth) and performance indicators (serve, reception, set, attack, dig and block) were the variables considered in this study. In a first moment, performance indicators were used in a logistic model of set result, by binary logistic regression analysis. After finding the adjusted logistic model, the log-odds of winning the set were analysed according to game location and set number. The results showed that winning a set is significantly related to performance indicators (Chisquare(18)=660.97, p<0.01). Analyses of log-odds of winning a set demonstrate that home teams always have more probability of winning the game than away teams, regardless of the set number. Home teams have more advantage at the beginning of the game (first set) and in the two last sets of the game (fourth and fifth sets), probably due to facilities familiarity and crowd effects. Different game actions explain these advantages and showed that to win the first set is more important to take risk, through a better performance in the attack and block, and to win the final set is important to manage the risk through a better performance on the reception. These results may suggest intra-game variation in home advantage and can be most useful to better prepare and direct the competition. Key pointsHome teams always have more probability of winning the game than away teams.Home teams have higher performance in reception, set and attack in the total of the sets.The advantage of home teams is more pronounced at the beginning of the game (first set) and in two last sets of the game (fourth and fifth sets) suggesting intra-game variation in home advantage.Analysis by sets

  9. 76 FR 56262 - Community Advantage Pilot Program

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-12

    ... SMALL BUSINESS ADMINISTRATION [Docket No. SBA 2011-0003] Community Advantage Pilot Program AGENCY: U.S. Small Business Administration (SBA). ACTION: Notice of change to Community Advantage Pilot... Community Advantage Pilot Program. In that notice, SBA modified or waived as appropriate certain regulations...

  10. A new maximum power tracking in PV system during partially shaded conditions based on shuffled frog leap algorithm

    NASA Astrophysics Data System (ADS)

    Sridhar, R.; Jeevananthan, S.; Dash, S. S.; Vishnuram, Pradeep

    2017-05-01

    Maximum Power Point Trackers (MPPTs) are power electronic conditioners used in photovoltaic (PV) system to ensure that PV structures feed maximum power for the given ambient temperature and sun's irradiation. When the PV panels are shaded by a fraction due to any environment hindrances then, conventional MPPT trackers may fail in tracking the appropriate peak power as there will be multi power peaks. In this work, a shuffled frog leap algorithm (SFLA) is proposed and it successfully identifies the global maximum power point among other local maxima. The SFLA MPPT is compared with a well-entrenched conventional perturb and observe (P&O) MPPT algorithm and a global search particle swarm optimisation (PSO) MPPT. The simulation results reveal that the proposed algorithm is highly advantageous than P&O, as it tracks nearly 30% more power for a given shading pattern. The credible nature of the proposed SFLA is ensured when it outplays PSO MPPT in convergence. The whole system is realised in MATLAB/Simulink environment.

  11. A method to directly measure maximum volume of fish stomachs or digestive tracts

    USGS Publications Warehouse

    Burley, C.C.; Vigg, S.

    1989-01-01

    A new method for measuring maximum stomach or digestive tract volume of fish incorporates air injection at constant pressure with water displacement to measure directly the internal volume of a stomach or analogous structure. The method was tested with coho salmon, Oncorhynchus kisutch (Walbaum), which has a true stomach, and northern squawfish, Ptychocheilus oregonensis(Richardson), which has a modified foregut as a functional analogue. Both species were collected during July-October 1987 from the Columbia River, U.S.A. Relationships between fish weight (= volume) and maximum volume of the digestive organ were best fitted for coho salmon by an allometric model and for northern squawfish by an exponential model. Least squares regression analysis of individual measurements showed less variability in the volume of coho salmon stomachs (R2= 0.85) than in the total digestive tracts (R2= 0.55) and foreguts (R2= 0.61) of northern squawfish, relative to fish size. Compared to previous methods, the new technique has the advantage of accurately measuring the internal volume of a wide range of digestive organ shapes and sizes.

  12. Maximum height and minimum time vertical jumping.

    PubMed

    Domire, Zachary J; Challis, John H

    2015-08-20

    The performance criterion in maximum vertical jumping has typically been assumed to simply raise the center of mass as high as possible. In many sporting activities minimizing movement time during the jump is likely also critical to successful performance. The purpose of this study was to examine maximum height jumps performed while minimizing jump time. A direct dynamics model was used to examine squat jump performance, with dual performance criteria: maximize jump height and minimize jump time. The muscle model had activation dynamics, force-length, force-velocity properties, and a series of elastic component representing the tendon. The simulations were run in two modes. In Mode 1 the model was placed in a fixed initial position. In Mode 2 the simulation model selected the initial squat configuration as well as the sequence of muscle activations. The inclusion of time as a factor in Mode 1 simulations resulted in a small decrease in jump height and moderate time savings. The improvement in time was mostly accomplished by taking off from a less extended position. In Mode 2 simulations, more substantial time savings could be achieved by beginning the jump in a more upright posture. However, when time was weighted more heavily in these simulations, there was a more substantial reduction in jump height. Future work is needed to examine the implications for countermovement jumping and to examine the possibility of minimizing movement time as part of the control scheme even when the task is to jump maximally. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Digital tomosynthesis mammography using a parallel maximum-likelihood reconstruction method

    NASA Astrophysics Data System (ADS)

    Wu, Tao; Zhang, Juemin; Moore, Richard; Rafferty, Elizabeth; Kopans, Daniel; Meleis, Waleed; Kaeli, David

    2004-05-01

    A parallel reconstruction method, based on an iterative maximum likelihood (ML) algorithm, is developed to provide fast reconstruction for digital tomosynthesis mammography. Tomosynthesis mammography acquires 11 low-dose projections of a breast by moving an x-ray tube over a 50° angular range. In parallel reconstruction, each projection is divided into multiple segments along the chest-to-nipple direction. Using the 11 projections, segments located at the same distance from the chest wall are combined to compute a partial reconstruction of the total breast volume. The shape of the partial reconstruction forms a thin slab, angled toward the x-ray source at a projection angle 0°. The reconstruction of the total breast volume is obtained by merging the partial reconstructions. The overlap region between neighboring partial reconstructions and neighboring projection segments is utilized to compensate for the incomplete data at the boundary locations present in the partial reconstructions. A serial execution of the reconstruction is compared to a parallel implementation, using clinical data. The serial code was run on a PC with a single PentiumIV 2.2GHz CPU. The parallel implementation was developed using MPI and run on a 64-node Linux cluster using 800MHz Itanium CPUs. The serial reconstruction for a medium-sized breast (5cm thickness, 11cm chest-to-nipple distance) takes 115 minutes, while a parallel implementation takes only 3.5 minutes. The reconstruction time for a larger breast using a serial implementation takes 187 minutes, while a parallel implementation takes 6.5 minutes. No significant differences were observed between the reconstructions produced by the serial and parallel implementations.

  14. Take-Home Experiments in Undergraduate Fluid Mechanics Education

    NASA Astrophysics Data System (ADS)

    Cimbala, John

    2007-11-01

    Hands-on take-home experiments, assigned as homework, are useful as supplements to traditional in-class demonstrations and laboratories. Students borrow the equipment from the department's equipment room, and perform the experiment either at home or in the student lounge or student shop work area. Advantages include: (1) easy implementation, especially for large classes, (2) low cost and easy duplication of multiple units, (3) no loss of lecture time since the take-home experiment is self-contained with all necessary instructions, and (4) negligible increase in student or teaching assistant work load since the experiment is assigned as a homework problem in place of a traditional pen and paper problem. As an example, a pump flow take-home experiment was developed, implemented, and assessed in our introductory junior-level fluid mechanics course at Penn State. The experimental apparatus consists of a bucket, tape measure, submersible aquarium pump, tubing, measuring cup, and extension cord. We put together twenty sets at a total cost of less than 20 dollars per set. Students connect the tube to the pump outlet, submerge the pump in water, and measure the volume flow rate produced at various outflow elevations. They record and plot volume flow rate as a function of outlet elevation, and compare with predictions based on the manufacturer's pump performance curve (head versus volume flow rate) and flow losses. The homework assignment includes an online pre-test and post-test to assess the change in students' understanding of the principles of pump performance. The results of the assessment support a significant learning gain following the completion of the take-home experiment.

  15. Smart device-based testing for medical students in Korea: satisfaction, convenience, and advantages.

    PubMed

    Lim, Eun Young; Yim, Mi Kyoung; Huh, Sun

    2017-01-01

    The aim of this study was to investigate respondents' satisfaction with smart device-based testing (SBT), as well as its convenience and advantages, in order to improve its implementation. The survey was conducted among 108 junior medical students at Kyungpook National University School of Medicine, Korea, who took a practice licensing examination using SBT in September 2015. The survey contained 28 items scored using a 5-point Likert scale. The items were divided into the following three categories: satisfaction with SBT administration, convenience of SBT features, and advantages of SBT compared to paper-and-pencil testing or computer-based testing. The reliability of the survey was 0.95. Of the three categories, the convenience of the SBT features received the highest mean (M) score (M= 3.75, standard deviation [SD]= 0.69), while the category of satisfaction with SBT received the lowest (M= 3.13, SD= 1.07). No statistically significant differences across these categories with respect to sex, age, or experience were observed. These results indicate that SBT was practical and effective to take and to administer.

  16. Mechanical limits to maximum weapon size in a giant rhinoceros beetle.

    PubMed

    McCullough, Erin L

    2014-07-07

    The horns of giant rhinoceros beetles are a classic example of the elaborate morphologies that can result from sexual selection. Theory predicts that sexual traits will evolve to be increasingly exaggerated until survival costs balance the reproductive benefits of further trait elaboration. In Trypoxylus dichotomus, long horns confer a competitive advantage to males, yet previous studies have found that they do not incur survival costs. It is therefore unlikely that horn size is limited by the theoretical cost-benefit equilibrium. However, males sometimes fight vigorously enough to break their horns, so mechanical limits may set an upper bound on horn size. Here, I tested this mechanical limit hypothesis by measuring safety factors across the full range of horn sizes. Safety factors were calculated as the ratio between the force required to break a horn and the maximum force exerted on a horn during a typical fight. I found that safety factors decrease with increasing horn length, indicating that the risk of breakage is indeed highest for the longest horns. Structural failure of oversized horns may therefore oppose the continued exaggeration of horn length driven by male-male competition and set a mechanical limit on the maximum size of rhinoceros beetle horns. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

  17. It Takes Research to Build a Community: Ongoing Challenges for Scholars in Digitally-Supported Communicative Language Teaching

    ERIC Educational Resources Information Center

    Dooly, Melinda

    2015-01-01

    This article provides an argument for closer multilateral alliances between the emergent and loosely-bound international community of educational researchers who are working in areas related to Digitally Supported Communicative Language Teaching and learning (herein DSCLT). By taking advantage of the communications revolution that is currently…

  18. Taking advantage of Google's Web-based applications and services.

    PubMed

    Brigham, Tara J

    2014-01-01

    Google is a company that is constantly expanding and growing its services and products. While most librarians possess a "love/hate" relationship with Google, there are a number of reasons you should consider exploring some of the tools Google has created and made freely available. Applications and services such as Google Docs, Slides, and Google+ are functional and dynamic without the cost of comparable products. This column will address some of the issues users should be aware of before signing up to use Google's tools, and a description of some of Google's Web applications and services, plus how they can be useful to librarians in health care.

  19. Superior piezoelectric composite films: taking advantage of carbon nanomaterials.

    PubMed

    Saber, Nasser; Araby, Sherif; Meng, Qingshi; Hsu, Hung-Yao; Yan, Cheng; Azari, Sara; Lee, Sang-Heon; Xu, Yanan; Ma, Jun; Yu, Sirong

    2014-01-31

    Piezoelectric composites comprising an active phase of ferroelectric ceramic and a polymer matrix have recently found numerous sensory applications. However, it remains a major challenge to further improve their electromechanical response for advanced applications such as precision control and monitoring systems. We here investigated the incorporation of graphene platelets (GnPs) and multi-walled carbon nanotubes (MWNTs), each with various weight fractions, into PZT (lead zirconate titanate)/epoxy composites to produce three-phase nanocomposites. The nanocomposite films show markedly improved piezoelectric coefficients and electromechanical responses (50%) besides an enhancement of ~200% in stiffness. The carbon nanomaterials strengthened the impact of electric field on the PZT particles by appropriately raising the electrical conductivity of the epoxy. GnPs have been proved to be far more promising in improving the poling behavior and dynamic response than MWNTs. The superior dynamic sensitivity of GnP-reinforced composite may be caused by the GnPs' high load transfer efficiency arising from their two-dimensional geometry and good compatibility with the matrix. The reduced acoustic impedance mismatch resulting from the improved thermal conductance may also contribute to the higher sensitivity of GnP-reinforced composite. This research pointed out the potential of employing GnPs to develop highly sensitive piezoelectric composites for sensing applications.

  20. Taking Advantage of Murder and Mayhem for Social Studies.

    ERIC Educational Resources Information Center

    Harden, G. Daniel

    1991-01-01

    Suggests the use of key historical antisocial acts to teach social studies concepts as a means of arousing the interest of adolescents. Recommends overcoming initial sensationalism by shifting emphasis to more appropriate interests. Includes discussion of the Abraham Lincoln and John F. Kennedy assassinations and the Rosenberg spy case. Suggests…

  1. Evaluation of pliers' grip spans in the maximum gripping task and sub-maximum cutting task.

    PubMed

    Kim, Dae-Min; Kong, Yong-Ku

    2016-12-01

    A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.

  2. Maximum reflectance and transmittance of films coated with gapped graphene in the context of the Dirac model

    NASA Astrophysics Data System (ADS)

    Klimchitskaya, G. L.; Mostepanenko, V. M.

    2018-06-01

    The analytic expressions for the maximum and minimum reflectances of optical films coated with gapped graphene are derived in the application region of the Dirac model taking into account multiple reflections. The respective film thicknesses are also found. In so doing the film material is described by the frequency-dependent index of refraction and graphene by the polarization tensor defined along the real frequency axis. The developed formalism is illustrated by an example of the graphene-coated film made of amorphous silica. Numerical computations of the maximum and minimum reflectances and respective film thicknesses are performed at room temperature in two frequency regions belonging to the near-infrared and far-infrared domains. It is shown that in the far-infrared domain the graphene coating has a profound effect on the values of maximum reflectance and respective film thickness leading to a relative increase in their values by up to 65% and 50%, respectively. The maximum transmittance of a graphene-coated film of appropriately chosen thickness is shown to exceed 90%. Possible applications of the obtained results are discussed.

  3. Efficiency at maximum power of a chemical engine.

    PubMed

    Hooyberghs, Hans; Cleuren, Bart; Salazar, Alberto; Indekeu, Joseph O; Van den Broeck, Christian

    2013-10-07

    A cyclically operating chemical engine is considered that converts chemical energy into mechanical work. The working fluid is a gas of finite-sized spherical particles interacting through elastic hard collisions. For a generic transport law for particle uptake and release, the efficiency at maximum power η(mp) [corrected] takes the form 1/2+cΔμ+O(Δμ(2)), with 1∕2 a universal constant and Δμ the chemical potential difference between the particle reservoirs. The linear coefficient c is zero for engines featuring a so-called left/right symmetry or particle fluxes that are antisymmetric in the applied chemical potential difference. Remarkably, the leading constant in η(mp) [corrected] is non-universal with respect to an exceptional modification of the transport law. For a nonlinear transport model, we obtain η(mp) = 1/(θ + 1) [corrected], with θ > 0 the power of Δμ in the transport equation.

  4. Hot Water Propulsion for Horizontal Rocket Assisted Take-Off Systems for Future Reusable Launch Vehicles

    NASA Astrophysics Data System (ADS)

    Pilz, N.; Adirim, H.; Lo, R.; Schildknecht, A.

    2004-10-01

    Among other concepts, reusable space transportation systems that comprise winged reusable launch vehicles (RLV) with horizontal take-off and horizontal landing (HTHL) are under worldwide investigation, e.g. the respective concepts within ESA's FESTIP-Study (Future European Space Transportation Integration Program) or the HOPPER concept by EADS-ST. The payload of these RLVs could be significantly increased by means of a ground-based take-off assistance system that would accelerate the vehicle along a horizontal track until it reaches the desired speed to ignite its onboard engines for leaving the ground and launching into orbit. This paper illustrates the advantages of horizontal take-off for winged RLVs and provides an overview of launch-assist options for HTHL RLVs. It presents hot water propulsion for ground-based take-off assistance systems for future RLVs as an attractive choice besides magnetic levitation and acceleration (maglev) technology. Finally, preliminary design concepts are presented for a rocket assisted take-off system (RATOS) with hot water propulsion followed by an analysis of its improvement potential.

  5. Practical advantages of evolutionary computation

    NASA Astrophysics Data System (ADS)

    Fogel, David B.

    1997-10-01

    Evolutionary computation is becoming a common technique for solving difficult, real-world problems in industry, medicine, and defense. This paper reviews some of the practical advantages to using evolutionary algorithms as compared with classic methods of optimization or artificial intelligence. Specific advantages include the flexibility of the procedures, as well as their ability to self-adapt the search for optimum solutions on the fly. As desktop computers increase in speed, the application of evolutionary algorithms will become routine.

  6. Advantaged group's emotional reactions to intergroup inequality: the dynamics of pride, guilt, and sympathy.

    PubMed

    Harth, Nicole Syringa; Kessler, Thomas; Leach, Colin Wayne

    2008-01-01

    Three studies establish intergroup inequality to investigate how it is emotionally experienced by the advantaged. Studies 1 and 2 examine psychology students' emotional experience of their unequal job situation with worse-off pedagogy students. When inequality is ingroup focused and legitimate, participants experience more pride. However, when inequality is ingroup focused and illegitimate, participants experience more guilt. Sympathy is increased when inequality is outgroup focused and illegitimate. These emotions have particular effects on behavioral tendencies. In Study 2 group-based pride predicts greater ingroup favoritism in a resource distribution task, whereas group-based sympathy predicts less ingroup favoritism. Study 3 replicates these findings in the context of students' willingness to let young immigrants take part in a university sport. Pride predicts less willingness to let immigrants take part whereas sympathy predicts greater willingness. Guilt is a weak predictor of behavioral tendencies in all studies. This shows the specificity of emotions experienced about intergroup inequality.

  7. Take the "Ow!" Out of Taxes Now: How to Plan for and Increase Your Medical Deductions

    ERIC Educational Resources Information Center

    Medisky, Shannon M.

    2009-01-01

    Each year countless taxpayers overpay simply because they're not taking full advantage of medical deductions. Individuals with disabilities are especially at risk. Time and energy spent running around to doctor visits, therapy sessions, and the like can leave little left to spend on preparing taxes. Fortunately, with a little effort year round and…

  8. Axial resolution improvement in spectral domain optical coherence tomography using a depth-adaptive maximum-a-posterior framework

    NASA Astrophysics Data System (ADS)

    Boroomand, Ameneh; Tan, Bingyao; Wong, Alexander; Bizheva, Kostadinka

    2015-03-01

    The axial resolution of Spectral Domain Optical Coherence Tomography (SD-OCT) images degrades with scanning depth due to the limited number of pixels and the pixel size of the camera, any aberrations in the spectrometer optics and wavelength dependent scattering and absorption in the imaged object [1]. Here we propose a novel algorithm which compensates for the blurring effect of these factors of the depth-dependent axial Point Spread Function (PSF) in SDOCT images. The proposed method is based on a Maximum A Posteriori (MAP) reconstruction framework which takes advantage of a Stochastic Fully Connected Conditional Random Field (SFCRF) model. The aim is to compensate for the depth-dependent axial blur in SD-OCT images and simultaneously suppress the speckle noise which is inherent to all OCT images. Applying the proposed depth-dependent axial resolution enhancement technique to an OCT image of cucumber considerably improved the axial resolution of the image especially at higher imaging depths and allowed for better visualization of cellular membrane and nuclei. Comparing the result of our proposed method with the conventional Lucy-Richardson deconvolution algorithm clearly demonstrates the efficiency of our proposed technique in better visualization and preservation of fine details and structures in the imaged sample, as well as better speckle noise suppression. This illustrates the potential usefulness of our proposed technique as a suitable replacement for the hardware approaches which are often very costly and complicated.

  9. The Maximum Flux of Star-Forming Galaxies

    NASA Astrophysics Data System (ADS)

    Crocker, Roland M.; Krumholz, Mark R.; Thompson, Todd A.; Clutterbuck, Julie

    2018-04-01

    The importance of radiation pressure feedback in galaxy formation has been extensively debated over the last decade. The regime of greatest uncertainty is in the most actively star-forming galaxies, where large dust columns can potentially produce a dust-reprocessed infrared radiation field with enough pressure to drive turbulence or eject material. Here we derive the conditions under which a self-gravitating, mixed gas-star disc can remain hydrostatic despite trapped radiation pressure. Consistently taking into account the self-gravity of the medium, the star- and dust-to-gas ratios, and the effects of turbulent motions not driven by radiation, we show that galaxies can achieve a maximum Eddington-limited star formation rate per unit area \\dot{Σ }_*,crit ˜ 10^3 M_{⊙} pc-2 Myr-1, corresponding to a critical flux of F*, crit ˜ 1013L⊙ kpc-2 similar to previous estimates; higher fluxes eject mass in bulk, halting further star formation. Conversely, we show that in galaxies below this limit, our one-dimensional models imply simple vertical hydrostatic equilibrium and that radiation pressure is ineffective at driving turbulence or ejecting matter. Because the vast majority of star-forming galaxies lie below the maximum limit for typical dust-to-gas ratios, we conclude that infrared radiation pressure is likely unimportant for all but the most extreme systems on galaxy-wide scales. Thus, while radiation pressure does not explain the Kennicutt-Schmidt relation, it does impose an upper truncation on it. Our predicted truncation is in good agreement with the highest observed gas and star formation rate surface densities found both locally and at high redshift.

  10. The maximum flux of star-forming galaxies

    NASA Astrophysics Data System (ADS)

    Crocker, Roland M.; Krumholz, Mark R.; Thompson, Todd A.; Clutterbuck, Julie

    2018-07-01

    The importance of radiation pressure feedback in galaxy formation has been extensively debated over the last decade. The regime of greatest uncertainty is in the most actively star-forming galaxies, where large dust columns can potentially produce a dust-reprocessed infrared radiation field with enough pressure to drive turbulence or eject material. Here, we derive the conditions under which a self-gravitating mixed gas-star disc can remain hydrostatic despite trapped radiation pressure. Consistently, taking into account the self-gravity of the medium, the star- and dust-to-gas ratios, and the effects of turbulent motions not driven by radiation, we show that galaxies can achieve a maximum Eddington-limited star formation rate per unit area \\dot{Σ }_*,crit ˜ 10^3 M_{⊙} pc-2 Myr-1, corresponding to a critical flux of F*,crit ˜ 1013 L⊙ kpc-2 similar to previous estimates; higher fluxes eject mass in bulk, halting further star formation. Conversely, we show that in galaxies below this limit, our 1D models imply simple vertical hydrostatic equilibrium and that radiation pressure is ineffective at driving turbulence or ejecting matter. Because the vast majority of star-forming galaxies lie below the maximum limit for typical dust-to-gas ratios, we conclude that infrared radiation pressure is likely unimportant for all but the most extreme systems on galaxy-wide scales. Thus, while radiation pressure does not explain the Kennicutt-Schmidt relation, it does impose an upper truncation on it. Our predicted truncation is in good agreement with the highest observed gas and star formation rate surface densities found both locally and at high redshift.

  11. Maximum wind energy extraction strategies using power electronic converters

    NASA Astrophysics Data System (ADS)

    Wang, Quincy Qing

    2003-10-01

    This thesis focuses on maximum wind energy extraction strategies for achieving the highest energy output of variable speed wind turbine power generation systems. Power electronic converters and controls provide the basic platform to accomplish the research of this thesis in both hardware and software aspects. In order to send wind energy to a utility grid, a variable speed wind turbine requires a power electronic converter to convert a variable voltage variable frequency source into a fixed voltage fixed frequency supply. Generic single-phase and three-phase converter topologies, converter control methods for wind power generation, as well as the developed direct drive generator, are introduced in the thesis for establishing variable-speed wind energy conversion systems. Variable speed wind power generation system modeling and simulation are essential methods both for understanding the system behavior and for developing advanced system control strategies. Wind generation system components, including wind turbine, 1-phase IGBT inverter, 3-phase IGBT inverter, synchronous generator, and rectifier, are modeled in this thesis using MATLAB/SIMULINK. The simulation results have been verified by a commercial simulation software package, PSIM, and confirmed by field test results. Since the dynamic time constants for these individual models are much different, a creative approach has also been developed in this thesis to combine these models for entire wind power generation system simulation. An advanced maximum wind energy extraction strategy relies not only on proper system hardware design, but also on sophisticated software control algorithms. Based on literature review and computer simulation on wind turbine control algorithms, an intelligent maximum wind energy extraction control algorithm is proposed in this thesis. This algorithm has a unique on-line adaptation and optimization capability, which is able to achieve maximum wind energy conversion efficiency through

  12. Neural Modeling of Fuzzy Controllers for Maximum Power Point Tracking in Photovoltaic Energy Systems

    NASA Astrophysics Data System (ADS)

    Lopez-Guede, Jose Manuel; Ramos-Hernanz, Josean; Altın, Necmi; Ozdemir, Saban; Kurt, Erol; Azkune, Gorka

    2018-06-01

    One field in which electronic materials have an important role is energy generation, especially within the scope of photovoltaic energy. This paper deals with one of the most relevant enabling technologies within that scope, i.e, the algorithms for maximum power point tracking implemented in the direct current to direct current converters and its modeling through artificial neural networks (ANNs). More specifically, as a proof of concept, we have addressed the problem of modeling a fuzzy logic controller that has shown its performance in previous works, and more specifically the dimensionless duty cycle signal that controls a quadratic boost converter. We achieved a very accurate model since the obtained medium squared error is 3.47 × 10-6, the maximum error is 16.32 × 10-3 and the regression coefficient R is 0.99992, all for the test dataset. This neural implementation has obvious advantages such as a higher fault tolerance and a simpler implementation, dispensing with all the complex elements needed to run a fuzzy controller (fuzzifier, defuzzifier, inference engine and knowledge base) because, ultimately, ANNs are sums and products.

  13. Fuzzy observer-based control for maximum power-point tracking of a photovoltaic system

    NASA Astrophysics Data System (ADS)

    Allouche, M.; Dahech, K.; Chaabane, M.; Mehdi, D.

    2018-04-01

    This paper presents a novel fuzzy control design method for maximum power-point tracking (MPPT) via a Takagi and Sugeno (TS) fuzzy model-based approach. A knowledge-dynamic model of the PV system is first developed leading to a TS representation by a simple convex polytopic transformation. Then, based on this exact fuzzy representation, a H∞ observer-based fuzzy controller is proposed to achieve MPPT even when we consider varying climatic conditions. A specified TS reference model is designed to generate the optimum trajectory which must be tracked to ensure maximum power operation. The controller and observer gains are obtained in a one-step procedure by solving a set of linear matrix inequalities (LMIs). The proposed method has been compared with some classical MPPT techniques taking into account convergence speed and tracking accuracy. Finally, various simulation and experimental tests have been carried out to illustrate the effectiveness of the proposed TS fuzzy MPPT strategy.

  14. Maximum power point tracking techniques for wind energy systems using three levels boost converter

    NASA Astrophysics Data System (ADS)

    Tran, Cuong Hung; Nollet, Frédéric; Essounbouli, Najib; Hamzaoui, Abdelaziz

    2018-05-01

    This paper presents modeling and simulation of three level Boost DC-DC converter in Wind Energy Conversion System (WECS). Three-level Boost converter has significant advantage compared to conventional Boost. A maximum power point tracking (MPPT) method for a variable speed wind turbine using permanent magnet synchronous generator (PMSG) is also presented. Simulation of three-level Boost converter topology with Perturb and Observe algorithm and Fuzzy Logic Control is implemented in MATLAB/SIMULINK. Results of this simulation show that the system with MPPT using fuzzy logic controller has better performance to the Perturb and Observe algorithm: fast response under changing conditions and small oscillation.

  15. 5 CFR 1600.22 - Maximum contributions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Maximum contributions. 1600.22 Section... ELECTIONS AND CONTRIBUTION ALLOCATIONS Program of Contributions § 1600.22 Maximum contributions. (a) Regular...) FERS percentage limit. The maximum employee contribution from basic pay for a FERS participant for 2005...

  16. Statistical assessment of changes in extreme maximum temperatures over Saudi Arabia, 1985-2014

    NASA Astrophysics Data System (ADS)

    Raggad, Bechir

    2018-05-01

    In this study, two statistical approaches were adopted in the analysis of observed maximum temperature data collected from fifteen stations over Saudi Arabia during the period 1985-2014. In the first step, the behavior of extreme temperatures was analyzed and their changes were quantified with respect to the Expert Team on Climate Change Detection Monitoring indices. The results showed a general warming trend over most stations, in maximum temperature-related indices, during the period of analysis. In the second step, stationary and non-stationary extreme-value analyses were conducted for the temperature data. The results revealed that the non-stationary model with increasing linear trend in its location parameter outperforms the other models for two-thirds of the stations. Additionally, the 10-, 50-, and 100-year return levels were found to change with time considerably and that the maximum temperature could start to reappear in the different T-year return period for most stations. This analysis shows the importance of taking account the change over time in the estimation of return levels and therefore justifies the use of the non-stationary generalized extreme value distribution model to describe most of the data. Furthermore, these last findings are in line with the result of significant warming trends found in climate indices analyses.

  17. Toward a social capital theory of competitive advantage in medical groups.

    PubMed

    Hoelscher, Mark L; Hoffman, James J; Dawley, David

    2005-01-01

    Social capital can have a positive impact on medical group performance. We forward our theory based on the integration of theories in social capital, resource advantage, and the resource-based view of the firm. Further, we suggest specific ways in which medical groups can increase their levels of social capital. First, medical groups should design or redesign the workplace so that there is ample interaction among employees. Second, employee participation within the community should be encouraged. Third, medical groups should recognize that social capital becomes ingrained in organizational culture. Therefore, medical groups should take steps to ensure a culture that supports its social capital. Fourth, hiring procedures should be designed (or redesigned) to ensure that new employees add social capital to the organization. Finally, trust must be fostered at the employee level.

  18. Virtual online consultations: advantages and limitations (VOCAL) study

    PubMed Central

    Greenhalgh, Trisha; Vijayaraghavan, Shanti; Wherton, Joe; Shaw, Sara; Byrne, Emma; Campbell-Richards, Desirée; Bhattacharya, Satya; Hanson, Philippa; Ramoutar, Seendy; Gutteridge, Charles; Hodkinson, Isabel; Collard, Anna; Morris, Joanne

    2016-01-01

    Introduction Remote video consultations between clinician and patient are technically possible and increasingly acceptable. They are being introduced in some settings alongside (and occasionally replacing) face-to-face or telephone consultations. Methods To explore the advantages and limitations of video consultations, we will conduct in-depth qualitative studies of real consultations (microlevel) embedded in an organisational case study (mesolevel), taking account of national context (macrolevel). The study is based in 2 contrasting clinical settings (diabetes and cancer) in a National Health Service (NHS) acute trust in London, UK. Main data sources are: microlevel—audio, video and screen capture to produce rich multimodal data on 45 remote consultations; mesolevel—interviews, ethnographic observations and analysis of documents within the trust; macrolevel—key informant interviews of national-level stakeholders and document analysis. Data will be analysed and synthesised using a sociotechnical framework developed from structuration theory. Ethics approval City Road and Hampstead NHS Research Ethics Committee, 9 December 2014, reference 14/LO/1883. Planned outputs We plan outputs for 5 main audiences: (1) academics: research publications and conference presentations; (2) service providers: standard operating procedures, provisional operational guidance and key safety issues; (3) professional bodies and defence societies: summary of relevant findings to inform guidance to members; (4) policymakers: summary of key findings; (5) patients and carers: ‘what to expect in your virtual consultation’. Discussion The research literature on video consultations is sparse. Such consultations offer potential advantages to patients (who are spared the cost and inconvenience of travel) and the healthcare system (eg, they may be more cost-effective), but fears have been expressed that they may be clinically risky and/or less acceptable to patients or staff, and they

  19. Modelling home advantage in the Summer Olympic Games.

    PubMed

    Balmer, N J; Nevill, A M; Williams, A M

    2003-06-01

    Home advantage in team games is well proven and the influence of the crowd upon officials' decisions has been identified as a plausible cause. The aim of this study was to assess the significance of home advantage for five event groups selected from the Summer Olympic Games between 1896 and 1996, and put home advantage in team games in context with other sports. The five event groups were athletics and weightlifting (predominantly objectively judged), boxing and gymnastics (predominantly subjectively judged) and team games (involving subjective decisions). The proportion of points won was analysed as a binomial response variable using generalized linear interactive modelling. Preliminary exploration of the data highlighted the need to control for the proportion of competitors entered and to split the analysis pre- and post-war. Highly significant home advantage was found in event groups that were either subjectively judged or rely on subjective decisions. In contrast, little or no home advantage (and even away advantage) was observed for the two objectively judged groups. Officiating system was vital to both the existence and extent of home advantage. Our findings suggest that crowd noise has a greater influence upon officials' decisions than players' performances, as events with greater officiating input enjoyed significantly greater home advantage.

  20. Taking the pulse of the carbon release during the onset of the Paleocene-Eocene thermal maximum

    NASA Astrophysics Data System (ADS)

    Babila, T. L.; Bralower, T. J.; Robinson, M. M.; Self-Trail, J. M.; Zachos, J. C.

    2015-12-01

    The Paleocene-Eocene thermal maximum (PETM) (~55 Ma) is a warming event characterized by a negative carbon isotope excursion (CIE) representing a large and rapid injection of carbon into global reservoirs. Debate continues regarding the mechanism, magnitude, and tempo of the carbon released. A few terrestrial and marine sediment records document two distinct δ13C excursions a pre-onset excursion (POE) and CIE interpreted as evidence of multiple carbon injections. We generated geochemical records of ocean carbonate chemistry and temperature using cores drilled by the U.S Geological Survey (USGS) that recovered expanded sections of the PETM onset along the mid-Atlantic coastal plain. Our stable isotope (δ13C and δ18O) planktonic foraminifer records from South Dover Bridge (SDB), Maryland USA exhibit prominent anomalies across the Paleocene-Eocene boundary consistent to proximal coastal sites. δ13C records of mixed-layer (Acarinina spp.) and thermocline (Subbotina spp.) dwelling planktonic foraminifera show two negative carbon excursions that include a 2 ‰ POE and 3-4 ‰ CIE that return to baseline values between events in conjunction with bulk carbonate trends. Remarkably, contemporaneous foraminifer δ18O records exhibit only a minor response during the POE. This could be an artifact of preservation, or at face value, indicative of little to no warming. For the latter, this would require a rapid, but relatively small carbon release. To test the coupled link between atmosphere and surface ocean δ13C records we aim to integrate our geochemical results with model simulations to establish the duration and global extent of multiple carbon releases.

  1. 20 CFR 229.48 - Family maximum.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Family maximum. 229.48 Section 229.48... OVERALL MINIMUM GUARANTEE Computation of the Overall Minimum Rate § 229.48 Family maximum. (a) Family... month on one person's earnings record is limited. This limited amount is called the family maximum. The...

  2. 49 CFR 107.329 - Maximum penalties.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... maximum civil penalty is $110,000 if the violation results in death, serious illness or severe injury to... 49 Transportation 2 2012-10-01 2012-10-01 false Maximum penalties. 107.329 Section 107.329... PROGRAM PROCEDURES Enforcement Compliance Orders and Civil Penalties § 107.329 Maximum penalties. (a) A...

  3. 49 CFR 107.329 - Maximum penalties.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... maximum civil penalty is $110,000 if the violation results in death, serious illness or severe injury to... 49 Transportation 2 2010-10-01 2010-10-01 false Maximum penalties. 107.329 Section 107.329... PROGRAM PROCEDURES Enforcement Compliance Orders and Civil Penalties § 107.329 Maximum penalties. (a) A...

  4. 49 CFR 107.329 - Maximum penalties.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... maximum civil penalty is $110,000 if the violation results in death, serious illness or severe injury to... 49 Transportation 2 2011-10-01 2011-10-01 false Maximum penalties. 107.329 Section 107.329... PROGRAM PROCEDURES Enforcement Compliance Orders and Civil Penalties § 107.329 Maximum penalties. (a) A...

  5. Maximum warming occurs about one decade after a carbon dioxide emission

    NASA Astrophysics Data System (ADS)

    Ricke, Katharine L.; Caldeira, Ken

    2014-12-01

    It is known that carbon dioxide emissions cause the Earth to warm, but no previous study has focused on examining how long it takes to reach maximum warming following a particular CO2 emission. Using conjoined results of carbon-cycle and physical-climate model intercomparison projects (Taylor et al 2012, Joos et al 2013), we find the median time between an emission and maximum warming is 10.1 years, with a 90% probability range of 6.6-30.7 years. We evaluate uncertainties in timing and amount of warming, partitioning them into three contributing factors: carbon cycle, climate sensitivity and ocean thermal inertia. If uncertainty in any one factor is reduced to zero without reducing uncertainty in the other factors, the majority of overall uncertainty remains. Thus, narrowing uncertainty in century-scale warming depends on narrowing uncertainty in all contributing factors. Our results indicate that benefit from avoided climate damage from avoided CO2 emissions will be manifested within the lifetimes of people who acted to avoid that emission. While such avoidance could be expected to benefit future generations, there is potential for emissions avoidance to provide substantial benefit to current generations.

  6. Multi-Group Maximum Entropy Model for Translational Non-Equilibrium

    NASA Technical Reports Server (NTRS)

    Jayaraman, Vegnesh; Liu, Yen; Panesi, Marco

    2017-01-01

    The aim of the current work is to describe a new model for flows in translational non- equilibrium. Starting from the statistical description of a gas proposed by Boltzmann, the model relies on a domain decomposition technique in velocity space. Using the maximum entropy principle, the logarithm of the distribution function in each velocity sub-domain (group) is expressed with a power series in molecular velocity. New governing equations are obtained using the method of weighted residuals by taking the velocity moments of the Boltzmann equation. The model is applied to a spatially homogeneous Boltzmann equation with a Bhatnagar-Gross-Krook1(BGK) model collision operator and the relaxation of an initial non-equilibrium distribution to a Maxwellian is studied using the model. In addition, numerical results obtained using the model for a 1D shock tube problem are also reported.

  7. An Extinction Probe Through the HD 107146 Debris Ring: Taking Unique Advantage of a Background Galaxy Transit

    NASA Astrophysics Data System (ADS)

    Schneider, Glenn

    2016-10-01

    We propose a 3-cycle GO program utilizing a total of HST 30 orbits to directly measure and map the line-of-sight optical depth through the brightest sector of the HD 107146 solar-analog debris ring by ring-transit differential photometry of a bright (compared to the disk), spatially extended, background galaxy. We will advantageously exploit its serendipitously unique and experiment-enabling high proper motion reflex trajectory w.r.t. the galaxy back-lighting a sectional slice the exoplanetary debris system (EDS) with a 2D grid of multiple sight-lines through the nearly face-on disk over time. These measures (the only opportunity for such in remaining HST lifetime) will uniquely provide unambiguous extinction/optical depth constraints to better elucidate the physical properties of the debris particles in this otherwise well studied EDS. With these and prior data we will: (a) disambiguate inferred particle spatial, size, and mass density distributions otherwise conflated with debris material optical property dependencies, (b) better constrain the posited pathways for planetary debris dust production mechanisms in EDSs (e.g., catastrophic collisions of parent bodies, dust-production cascades, cratering events, etc.) and (c) search for and discriminated between clumps , bumps , and clouds of collisional debris of varying particle (and mass) densities. This investigation was enabled in forethought by mapping the galaxy surface brightness out-of-transit in a comprehensive 2011 precursor study (HST GO/12228) using exactly the same STIS instrumental configuration with multi-roll PSF template subtracted coronagraphy we propose for the upcoming ring transit opportunity.

  8. An Extinction Probe Through the HD 107146 Debris Ring: Taking Unique Advantage of a Background Galaxy Transit

    NASA Astrophysics Data System (ADS)

    Schneider, Glenn

    2017-08-01

    We propose a 3-cycle GO program utilizing a total of HST 30 orbits to directly measure and map the line-of-sight optical depth through the brightest sector of the HD 107146 solar-analog debris ring by ring-transit differential photometry of a bright (compared to the disk), spatially extended, background galaxy. We will advantageously exploit its serendipitously unique and experiment-enabling high proper motion reflex trajectory w.r.t. the galaxy back-lighting a sectional slice the exoplanetary debris system (EDS) with a 2D grid of multiple sight-lines through the nearly face-on disk over time. These measures (the only opportunity for such in remaining HST lifetime) will uniquely provide unambiguous extinction/optical depth constraints to better elucidate the physical properties of the debris particles in this otherwise well studied EDS. With these and prior data we will: (a) disambiguate inferred particle spatial, size, and mass density distributions otherwise conflated with debris material optical property dependencies, (b) better constrain the posited pathways for planetary debris dust production mechanisms in EDSs (e.g., catastrophic collisions of parent bodies, dust-production cascades, cratering events, etc.) and (c) search for and discriminated between clumps , bumps , and clouds of collisional debris of varying particle (and mass) densities. This investigation was enabled in forethought by mapping the galaxy surface brightness out-of-transit in a comprehensive 2011 precursor study (HST GO/12228) using exactly the same STIS instrumental configuration with multi-roll PSF template subtracted coronagraphy we propose for the upcoming ring transit opportunity.

  9. Measuring home advantage in Spanish handball.

    PubMed

    Gutiérrez Aguilar, Oscar; Saavedra García, Miguel; Fernández Romero, Juan José

    2012-02-01

    Since Pollard established the system for analysing home advantage in 1986, it has been demonstrated and quantified in various sports, including many team sports. This study aims to assess whether home advantage exists in handball, using a sample of more than 19,000 Spanish handball league games. Results of the games played at home and away, the sex of the players, and the levels of the competition were included as variables. In Spanish handball, there was a home advantage of 61%, which means, on average, the team playing at home wins 61% of points available. This value varies according to sex and according to competition level, increasing as competition level decreases and season rank improves.

  10. 34 CFR 674.12 - Loan maximums.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false Loan maximums. 674.12 Section 674.12 Education..., DEPARTMENT OF EDUCATION FEDERAL PERKINS LOAN PROGRAM General Provisions § 674.12 Loan maximums. (a) The maximum annual amount of Federal Perkins Loans and NDSLs an eligible student may borrow is— (1) $5,500 for...

  11. 49 CFR 190.223 - Maximum penalties.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Maximum penalties. 190.223 Section 190.223... PROCEDURES Enforcement Civil Penalties § 190.223 Maximum penalties. (a) Any person who is determined to have... except that the maximum civil penalty may not exceed $1,000,000 for any related series of violations. (b...

  12. 14 CFR 1261.102 - Maximum amount.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Maximum amount. 1261.102 Section 1261.102...) Employees' Personal Property Claims § 1261.102 Maximum amount. From October 1, 1982, to October 30, 1988, the maximum amount that may be paid under the Military Personnel and Civilian Employees' Claim Act of...

  13. The Maximum Likelihood Solution for Inclination-only Data

    NASA Astrophysics Data System (ADS)

    Arason, P.; Levi, S.

    2006-12-01

    The arithmetic means of inclination-only data are known to introduce a shallowing bias. Several methods have been proposed to estimate unbiased means of the inclination along with measures of the precision. Most of the inclination-only methods were designed to maximize the likelihood function of the marginal Fisher distribution. However, the exact analytical form of the maximum likelihood function is fairly complicated, and all these methods require various assumptions and approximations that are inappropriate for many data sets. For some steep and dispersed data sets, the estimates provided by these methods are significantly displaced from the peak of the likelihood function to systematically shallower inclinations. The problem in locating the maximum of the likelihood function is partly due to difficulties in accurately evaluating the function for all values of interest. This is because some elements of the log-likelihood function increase exponentially as precision parameters increase, leading to numerical instabilities. In this study we succeeded in analytically cancelling exponential elements from the likelihood function, and we are now able to calculate its value for any location in the parameter space and for any inclination-only data set, with full accuracy. Furtermore, we can now calculate the partial derivatives of the likelihood function with desired accuracy. Locating the maximum likelihood without the assumptions required by previous methods is now straight forward. The information to separate the mean inclination from the precision parameter will be lost for very steep and dispersed data sets. It is worth noting that the likelihood function always has a maximum value. However, for some dispersed and steep data sets with few samples, the likelihood function takes its highest value on the boundary of the parameter space, i.e. at inclinations of +/- 90 degrees, but with relatively well defined dispersion. Our simulations indicate that this occurs quite

  14. Feeding kinematics of freshwater turtles: what advantage do invasive species possess?

    PubMed

    Nishizawa, Hideaki; Tabata, Runa; Hori, Tomoya; Mitamura, Hiromich; Arai, Nobuaki

    2014-10-01

    The red-eared slider (Trachemys scripta) is an invasive turtle species that is displacing the populations of native freshwater turtles in many countries. However, the mechanism that makes red-eared sliders superior competitors has been less well studied. In this study, we compare the feeding kinematics of the red-eared slider with those of Reeves' pond turtle (Mauremys reevesii), a turtle native to East Asia, and offer an explanation as to why red-eared sliders are superior in food competition. Reeves' pond turtles sympatric to red-eared sliders have been reported to have a mainly durophagous diet in contrast to the preference for a soft diet in areas of allopatry to red-eared sliders, indicating the dietary shift resulted from food competition. Maximum neck extension and retraction speed are considered to be indicators of striking ability, but were not found to be superior in red-eared sliders. In fact, maximum neck extension speed was significantly higher in Reeves' pond turtles, though this advantage may be counteracted by the longer neck of Reeves' pond turtles, resulting in similar neck extension times. On the other hand, red-eared sliders had a significantly shorter gape cycle time and neck retraction time, indicating that they can complete feeding in a short time. Therefore, red-eared sliders are suggested to be superior in food competition not due to their striking ability, but due to exploiting preferable food in a shorter time. Copyright © 2014 Elsevier GmbH. All rights reserved.

  15. Advantages of isofocal printing in maskmaking with the ALTA 3500

    NASA Astrophysics Data System (ADS)

    Fuller, Scott E.; Pochkowski, Mike

    1999-04-01

    The ALTA 3500, an advanced scanned-laser mask lithography tool produced by Etec, was introduced to the marketplace in 1997. The system architecture was described and an initial performance evaluation was presented. This system, based on the ALTA 3000 system, uses a new 33.3X, 0.8 NA final reduction lens to reduce the spot size to 0.27 micrometers FWHM, thereby affording improved resolution and pattern acuity on the mask. An anisotropic chrome etch process was developed and introduced along with a TOK iP3600 resist to take advantage of the improved resolution. In this paper we will more extensively describe the performance of the ALTA 3500 scanned laser system and the performance of these new processes. In addition, an investigation of the benefits of operating in the optimal isofocal print region is examined and compared to printing at the nominal process conditions.

  16. 20 CFR 211.14 - Maximum creditable compensation.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Maximum creditable compensation. 211.14... CREDITABLE RAILROAD COMPENSATION § 211.14 Maximum creditable compensation. Maximum creditable compensation for calendar years after 1984 is the maximum annual taxable wage base defined in section 3231(e)(2)(B...

  17. The Persistence of Wives' Income Advantage

    ERIC Educational Resources Information Center

    Winslow-Bowe, Sarah

    2006-01-01

    Recent reports using cross-sectional data indicate an increase in the percentage of wives who outearn their husbands, yet we know little about the persistence of wives' income advantage. The present analyses utilize the 1990-1994 waves of the National Longitudinal Survey of Youth 1979 (N = 3,481) to examine wives' long-term earnings advantage.…

  18. THE HOME ADVANTAGE IN MAJOR LEAGUE BASEBALL.

    PubMed

    Jones, Marshall B

    2015-12-01

    Home advantage is smaller in baseball than in other major professional sports for men, specifically football, basketball, or soccer. This paper advances an explanation. It begins by reviewing the main observations to support the view that there is little or no home advantage in individual sports. It then presents the case that home advantage originates in impaired teamwork among the away players. The need for teamwork and the extent of it vary from sport to sport. To the extent that a sport requires little teamwork it is more like an individual sport, and the home team would be expected to enjoy only a small advantage. Interactions among players on the same side (teamwork) are much less common in baseball than in the other sports considered.

  19. 33 CFR 401.29 - Maximum draft.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Maximum draft. 401.29 Section 401... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.29 Maximum draft. (a) The draft...) The draft of a vessel shall not, in any case, exceed 79.2 dm or the maximum permissible draft...

  20. 33 CFR 401.29 - Maximum draft.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Maximum draft. 401.29 Section 401... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.29 Maximum draft. (a) The draft...) The draft of a vessel shall not, in any case, exceed 79.2 dm or the maximum permissible draft...

  1. 33 CFR 401.29 - Maximum draft.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Maximum draft. 401.29 Section 401... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.29 Maximum draft. (a) The draft...) The draft of a vessel shall not, in any case, exceed 79.2 dm or the maximum permissible draft...

  2. Should you take your brand to where the action is?

    PubMed

    Aaker, D A

    1997-01-01

    When markets turn hostile, it's no surprise that managers are tempted to extend their brands vertically--that is, to take their brands into a seemingly attractive market above or below their current positions. And for companies chasing growth, the urge to move into booming premium or value segments also can be hard to resist. The draw is indeed strong; and in some instances, a vertical move is not merely justified but actually essential to survival--even for top brands, which have the advantages of economies of scale, brand equity, and retail clout. But beware: leveraging a brand to access upscale or downscale markets is more dangerous than it first appears. Before making a move, then, managers should ascertain whether the rewards will be worth the risks. In general, David Aaker recommends that managers avoid vertical extensions whenever possible. There is an inherent contradiction in the very concept because brand equity is built in large part on image and perceived worth, and a vertical move can easily distort those qualities. Still, certain situations demand vertical extensions, and Aaker examines both the winners and the losers in the game. Managers may find themselves facing a situation that presents both an emerging opportunity and a strategic threat, and alternatives to vertical extensions may have even higher risks and costs. Furthermore, a number of brands have been extended vertically with complete success. If after assessing the risks and rewards you conclude that a vertical extension is on the horizon, proceed with caution. And keep in mind that your challenge will be to leverage and protect the original brand while taking advantage of the new opportunity.

  3. 24 CFR 941.306 - Maximum project cost.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 24 Housing and Urban Development 4 2012-04-01 2012-04-01 false Maximum project cost. 941.306... DEVELOPMENT PUBLIC HOUSING DEVELOPMENT Application and Proposal § 941.306 Maximum project cost. (a) Calculation of maximum project cost. The maximum project cost represents the total amount of public housing...

  4. 24 CFR 941.306 - Maximum project cost.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 24 Housing and Urban Development 4 2013-04-01 2013-04-01 false Maximum project cost. 941.306... DEVELOPMENT PUBLIC HOUSING DEVELOPMENT Application and Proposal § 941.306 Maximum project cost. (a) Calculation of maximum project cost. The maximum project cost represents the total amount of public housing...

  5. 20 CFR 226.51 - Maximum monthly amount.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Maximum monthly amount. 226.51 Section 226.51... EMPLOYEE, SPOUSE, AND DIVORCED SPOUSE ANNUITIES Railroad Retirement Family Maximum § 226.51 Maximum monthly amount. The railroad retirement family maximum is equal to an employee's “final average monthly...

  6. Home advantage in the Winter Olympics (1908-1998).

    PubMed

    Balmer, N J; Nevill, A M; Williams, A M

    2001-02-01

    We obtained indices of home advantage, based on the medals won by competing nations, for each event held at the Winter Olympics from 1908 to 1998. These indices were designed to assess home advantage while controlling for nation strength, changes in the number of medals on offer and the performance of 'non-hosting' nations. Some evidence of home advantage was found in figure skating, freestyle skiing, ski jumping, alpine skiing and short track speed skating. In contrast, little or no home advantage was observed in ice hockey, Nordic combined, Nordic skiing, bobsled, luge, biathlon or speed skating. When all events were combined, a significant home advantage was observed (P = 0.029), although no significant differences in the extent of home advantage were found between events (P > 0.05). When events were grouped according to whether they were subjectively assessed by judges, significantly greater home advantage was observed in the subjectively assessed events (P = 0.037). This was a reflection of better home performances, suggesting that judges were scoring home competitors disproportionately higher than away competitors. Familiarity with local conditions was shown to have some effect, particularly in alpine skiing, although the bobsled and luge showed little or no advantage over other events. Regression analysis showed that the number of time zones and direction of travel produced no discernible trends or differences in performance.

  7. Mutations Enhancing Amino Acid Catabolism Confer a Growth Advantage in Stationary Phase

    PubMed Central

    Zinser, Erik R.; Kolter, Roberto

    1999-01-01

    Starved cultures of Escherichia coli undergo successive rounds of population takeovers by mutants of increasing fitness. These mutants express the growth advantage in stationary phase (GASP) phenotype. Previous work identified the rpoS819 allele as a GASP mutation allowing cells to take over stationary-phase cultures after growth in rich media (M. M. Zambrano, D. A. Siegele, M. A. Almirón, A. Tormo, and R. Kolter, Science 259:1757–1760, 1993). Here we have identified three new GASP loci from an aged rpoS819 strain: sgaA, sgaB, and sgaC. Each locus is capable of conferring GASP on the rpoS819 parent, and they can provide successively higher fitnesses for the bacteria in the starved cultures. All four GASP mutations isolated thus far allow for faster growth on both individual and mixtures of amino acids. Each mutation confers a growth advantage on a different subset of amino acids, and these mutations act in concert to increase the overall catabolic capacity of the cell. We present a model whereby this enhanced ability to catabolize amino acids is responsible for the fitness gain during carbon starvation, as it may allow GASP mutants to outcompete the parental cells when growing on the amino acids released by dying cells. PMID:10482523

  8. Theoretical Analysis of Maximum Flow Declination Rate versus Maximum Area Declination Rate in Phonation

    ERIC Educational Resources Information Center

    Titze, Ingo R.

    2006-01-01

    Purpose: Maximum flow declination rate (MFDR) in the glottis is known to correlate strongly with vocal intensity in voicing. This declination, or negative slope on the glottal airflow waveform, is in part attributable to the maximum area declination rate (MADR) and in part to the overall inertia of the air column of the vocal tract (lungs to…

  9. 49 CFR 230.24 - Maximum allowable stress.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Maximum allowable stress. 230.24 Section 230.24... Allowable Stress § 230.24 Maximum allowable stress. (a) Maximum allowable stress value. The maximum allowable stress value on any component of a steam locomotive boiler shall not exceed 1/4 of the ultimate...

  10. 49 CFR 230.24 - Maximum allowable stress.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Maximum allowable stress. 230.24 Section 230.24... Allowable Stress § 230.24 Maximum allowable stress. (a) Maximum allowable stress value. The maximum allowable stress value on any component of a steam locomotive boiler shall not exceed 1/4 of the ultimate...

  11. 49 CFR 230.24 - Maximum allowable stress.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Maximum allowable stress. 230.24 Section 230.24... Allowable Stress § 230.24 Maximum allowable stress. (a) Maximum allowable stress value. The maximum allowable stress value on any component of a steam locomotive boiler shall not exceed 1/4 of the ultimate...

  12. 49 CFR 230.24 - Maximum allowable stress.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Maximum allowable stress. 230.24 Section 230.24... Allowable Stress § 230.24 Maximum allowable stress. (a) Maximum allowable stress value. The maximum allowable stress value on any component of a steam locomotive boiler shall not exceed 1/4 of the ultimate...

  13. 49 CFR 230.24 - Maximum allowable stress.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Maximum allowable stress. 230.24 Section 230.24... Allowable Stress § 230.24 Maximum allowable stress. (a) Maximum allowable stress value. The maximum allowable stress value on any component of a steam locomotive boiler shall not exceed 1/4 of the ultimate...

  14. 14 CFR 23.1527 - Maximum operating altitude.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maximum operating altitude. 23.1527 Section... Information § 23.1527 Maximum operating altitude. (a) The maximum altitude up to which operation is allowed... established. (b) A maximum operating altitude limitation of not more than 25,000 feet must be established for...

  15. Recent technology and usage of plastic lenses in image taking objectives

    NASA Astrophysics Data System (ADS)

    Yamaguchi, Susumu; Sato, Hiroshi; Mori, Nobuyoshi; Kiriki, Toshihiko

    2005-09-01

    Recently, plastic lenses produced by injection molding are widely used in image taking objectives for digital cameras, camcorders, and mobile phone cameras, because of their suitability for volume production and ease of obtaining an advantage of aspherical surfaces. For digital camera and camcorder objectives, it is desirable that there is no image point variation with the temperature change in spite of employing several plastic lenses. At the same time, due to the shrinking pixel size of solid-state image sensor, there is now a requirement to assemble lenses with high accuracy. In order to satisfy these requirements, we have developed 16 times compact zoom objective for camcorder and 3 times class folded zoom objectives for digital camera, incorporating cemented plastic doublet consisting of a positive lens and a negative lens. Over the last few years, production volumes of camera-equipped mobile phones have increased substantially. Therefore, for mobile phone cameras, the consideration of productivity is more important than ever. For this application, we have developed a 1.3-mega pixels compact camera module with macro function utilizing the advantage of a plastic lens that can be given mechanically functional shape to outer flange part. Its objective consists of three plastic lenses and all critical dimensions related to optical performance can be determined by high precise optical elements. Therefore this camera module is manufactured without optical adjustment in automatic assembling line, and achieves both high productivity and high performance. Reported here are the constructions and the technical topics of image taking objectives described above.

  16. Theoretical Study of the Conditions of Maximum Manifestation of the Error Due to Inhomogeneity of Thermocouple Legs

    NASA Astrophysics Data System (ADS)

    Liu, Zhigang; Song, Wenguang; Kochan, Orest; Mykyichuk, Mykola; Jun, Su

    2017-07-01

    The method of theoretical analysis of temperature ranges for the maximum manifestation of the error due to acquired thermoelectric inhomogeneity of thermocouple legs is proposed in this paper. The drift function of the reference function of a type K thermocouples in a ceramic insulation, that consisted of 1.2 mm diameter thermoelements after their exposure to 800°C for 10 000 h in an oxidizing atmosphere (air), is analyzed. The method takes into account various operating conditions to determine the optimal conditions for studying inhomogeneous thermocouples. The method can be applied for other types of thermocouples when taking into account their specific characteristics and the conditions that they have been exposed to.

  17. Exploring the sequential lineup advantage using WITNESS.

    PubMed

    Goodsell, Charles A; Gronlund, Scott D; Carlson, Curt A

    2010-12-01

    Advocates claim that the sequential lineup is an improvement over simultaneous lineup procedures, but no formal (quantitatively specified) explanation exists for why it is better. The computational model WITNESS (Clark, Appl Cogn Psychol 17:629-654, 2003) was used to develop theoretical explanations for the sequential lineup advantage. In its current form, WITNESS produced a sequential advantage only by pairing conservative sequential choosing with liberal simultaneous choosing. However, this combination failed to approximate four extant experiments that exhibited large sequential advantages. Two of these experiments became the focus of our efforts because the data were uncontaminated by likely suspect position effects. Decision-based and memory-based modifications to WITNESS approximated the data and produced a sequential advantage. The next step is to evaluate the proposed explanations and modify public policy recommendations accordingly.

  18. Spacecraft Maximum Allowable Concentrations for Airborne Contaminants

    NASA Technical Reports Server (NTRS)

    James, John T.

    2008-01-01

    The enclosed table lists official spacecraft maximum allowable concentrations (SMACs), which are guideline values set by the NASA/JSC Toxicology Group in cooperation with the National Research Council Committee on Toxicology (NRCCOT). These values should not be used for situations other than human space flight without careful consideration of the criteria used to set each value. The SMACs take into account a number of unique factors such as the effect of space-flight stress on human physiology, the uniform good health of the astronauts, and the absence of pregnant or very young individuals. Documentation of the values is given in a 5 volume series of books entitled "Spacecraft Maximum Allowable Concentrations for Selected Airborne Contaminants" published by the National Academy Press, Washington, D.C. These books can be viewed electronically at http://books.nap.edu/openbook.php?record_id=9786&page=3. Short-term (1 and 24 hour) SMACs are set to manage accidental releases aboard a spacecraft and permit risk of minor, reversible effects such as mild mucosal irritation. In contrast, the long-term SMACs are set to fully protect healthy crewmembers from adverse effects resulting from continuous exposure to specific air pollutants for up to 1000 days. Crewmembers with allergies or unusual sensitivity to trace pollutants may not be afforded complete protection, even when long-term SMACs are not exceeded. Crewmember exposures involve a mixture of contaminants, each at a specific concentration (C(sub n)). These contaminants could interact to elicit symptoms of toxicity even though individual contaminants do not exceed their respective SMACs. The air quality is considered acceptable when the toxicity index (T(sub grp)) for each toxicological group of compounds is less than 1, where T(sub grp), is calculated as follows: T(sub grp) = C(sub 1)/SMAC(sub 1) + C(sub 2/SMAC(sub 2) + ...+C(sub n)/SMAC(sub n).

  19. Seeing their side versus feeling their pain: Differential consequences of perspective-taking and empathy at work.

    PubMed

    Longmire, Natalie H; Harrison, David A

    2018-04-16

    Perspective taking and empathic concern (empathy) have each been proposed as constructive approaches to social relationships. However, their potential distinctions, limitations, and consequences in task contexts are not well understood. We meta-analytically examined 304 independent samples to uncover unique effects of perspective taking and empathic concern on important work-related outcomes. We develop and test a contingency model of those effects, based on three facets of psychological interdependence: outcome, hierarchical (or power asymmetry), and social category (or in-group/out-group distinctions). Results revealed perspective taking and empathic concern to have positive impacts on being supportive of others, but the effects of empathic concern were stronger. In contrast, perspective taking was an asset and empathy was a liability for capturing value in strategic interactions (e.g., negotiations). Effects of perspective taking and empathic concern were differentially contingent on psychological interdependence. The impact of perspective taking, but not of empathic concern, was attenuated or reversed under negative outcome interdependence; perspective-taking leads to advantage taking in competitive contexts. Perspective taking was particularly beneficial when the actor had high power, but empathic concern's benefits were independent of hierarchy. Finally, social dissimilarity had no detectable impact on the effects of perspective taking or empathic concern, contrary to our theorizing. Overall results suggest two key conclusions. First, perspective taking and empathic concern have powerful effects on work-related outcomes. Second, each construct has its own distinctive and predictable impacts. We conclude by offering practical suggestions for improving workplace interactions through perspective taking and empathic concern. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  20. Novel maximum-margin training algorithms for supervised neural networks.

    PubMed

    Ludwig, Oswaldo; Nunes, Urbano

    2010-06-01

    This paper proposes three novel training methods, two of them based on the backpropagation approach and a third one based on information theory for multilayer perceptron (MLP) binary classifiers. Both backpropagation methods are based on the maximal-margin (MM) principle. The first one, based on the gradient descent with adaptive learning rate algorithm (GDX) and named maximum-margin GDX (MMGDX), directly increases the margin of the MLP output-layer hyperplane. The proposed method jointly optimizes both MLP layers in a single process, backpropagating the gradient of an MM-based objective function, through the output and hidden layers, in order to create a hidden-layer space that enables a higher margin for the output-layer hyperplane, avoiding the testing of many arbitrary kernels, as occurs in case of support vector machine (SVM) training. The proposed MM-based objective function aims to stretch out the margin to its limit. An objective function based on Lp-norm is also proposed in order to take into account the idea of support vectors, however, overcoming the complexity involved in solving a constrained optimization problem, usually in SVM training. In fact, all the training methods proposed in this paper have time and space complexities O(N) while usual SVM training methods have time complexity O(N (3)) and space complexity O(N (2)) , where N is the training-data-set size. The second approach, named minimization of interclass interference (MICI), has an objective function inspired on the Fisher discriminant analysis. Such algorithm aims to create an MLP hidden output where the patterns have a desirable statistical distribution. In both training methods, the maximum area under ROC curve (AUC) is applied as stop criterion. The third approach offers a robust training framework able to take the best of each proposed training method. The main idea is to compose a neural model by using neurons extracted from three other neural networks, each one previously trained by

  1. Patient-specific instruments: advantages and pitfalls

    PubMed Central

    Hafez, Mahmoud A.; Moholkar, Kirti

    2017-01-01

    Patient-specific instruments (PSI) aim to improve the accuracy of total knee replacement (TKR) based on computer-assisted preoperative planning. In this work, the authors describe the advantages and pitfalls of PSI based on their clinical experience. The main conclusion of this work is that PSI has direct impact on the logistical and technical features of TKR with some advantages and pitfalls. PMID:29227785

  2. Note Taking on Trial: A Legal Application of Note-Taking Research

    ERIC Educational Resources Information Center

    Kiewra, Kenneth A.

    2016-01-01

    This article is about note taking, but it is not an exhaustive review of note-taking literature. Instead, it portrays the application of note-taking research to an unusual and important area of practice--the law. I was hired to serve as an expert witness on note taking in a legal case that hinged, in part, on the completeness and accuracy of…

  3. Gauging the Nearness and Size of Cycle Maximum

    NASA Technical Reports Server (NTRS)

    Wilson, Robert M.; Hathaway, David H.

    2003-01-01

    A simple method for monitoring the nearness and size of conventional cycle maximum for an ongoing sunspot cycle is examined. The method uses the observed maximum daily value and the maximum monthly mean value of international sunspot number and the maximum value of the 2-mo moving average of monthly mean sunspot number to effect the estimation. For cycle 23, a maximum daily value of 246, a maximum monthly mean of 170.1, and a maximum 2-mo moving average of 148.9 were each observed in July 2000. Taken together, these values strongly suggest that conventional maximum amplitude for cycle 23 would be approx. 124.5, occurring near July 2002 +/-5 mo, very close to the now well-established conventional maximum amplitude and occurrence date for cycle 23-120.8 in April 2000.

  4. 31 CFR 359.52 - What happens if any person purchases book-entry Series I savings bonds in excess of the maximum...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the maximum amount? We reserve the right to take any action we deem necessary to adjust the excess, including the right to remove the excess bonds from your New Treasury Direct account and refund the payment price to your bank account of record using the ACH method of payment. ...

  5. Efficient method for computing the maximum-likelihood quantum state from measurements with additive Gaussian noise.

    PubMed

    Smolin, John A; Gambetta, Jay M; Smith, Graeme

    2012-02-17

    We provide an efficient method for computing the maximum-likelihood mixed quantum state (with density matrix ρ) given a set of measurement outcomes in a complete orthonormal operator basis subject to Gaussian noise. Our method works by first changing basis yielding a candidate density matrix μ which may have nonphysical (negative) eigenvalues, and then finding the nearest physical state under the 2-norm. Our algorithm takes at worst O(d(4)) for the basis change plus O(d(3)) for finding ρ where d is the dimension of the quantum state. In the special case where the measurement basis is strings of Pauli operators, the basis change takes only O(d(3)) as well. The workhorse of the algorithm is a new linear-time method for finding the closest probability distribution (in Euclidean distance) to a set of real numbers summing to one.

  6. Scale structure: Processing Minimum Standard and Maximum Standard Scalar Adjectives

    PubMed Central

    Frazier, Lyn; Clifton, Charles; Stolterfoht, Britta

    2008-01-01

    Gradable adjectives denote a function that takes an object and returns a measure of the degree to which the object possesses some gradable property (Kennedy, 1999). Scales, ordered sets of degrees, have begun to be studied systematically in semantics (Kennedy, to appear, Kennedy & McNally, 2005, Rotstein & Winter, 2004). We report four experiments designed to investigate the processing of absolute adjectives with a maximum standard (e.g., clean) and their minimum standard antonyms (dirty). The central hypothesis is that the denotation of an absolute adjective introduces a ‘standard value’ on a scale as part of the normal comprehension of a sentence containing the adjective (the “Obligatory Scale” hypothesis). In line with the predictions of Kennedy and McNally (2005) and Rotstein and Winter (2004), maximum standard adjectives and minimum standard adjectives systematically differ from each other when they are combined with minimizing modifiers like slightly, as indicated by speeded acceptability judgments. An eye movement recording study shows that, as predicted by the Obligatory Scale hypothesis, the penalty due to combining slightly with a maximum standard adjective can be observed during the processing of the sentence; the penalty is not the result of some after-the-fact inferencing mechanism. Further, a type of ‘quantificational variability effect’ may be observed when a quantificational adverb (mostly) is combined with a minimum standard adjective in sentences like The dishes are mostly dirty, which may receive either a degree interpretation (e.g. 80% dirty) or a quantity interpretation (e.g., 80% of the dishes are dirty). The quantificational variability results provide suggestive support for the Obligatory Scale hypothesis by showing that the standard of a scalar adjective influences the preferred interpretation of other constituents in the sentence. PMID:17376422

  7. Probable Maximum Precipitation in the U.S. Pacific Northwest in a Changing Climate: PMP UNDER CLIMATE CHANGE

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chen, Xiaodong; Hossain, Faisal; Leung, L. Ruby

    The safety of large and aging water infrastructures is gaining attention in water management given the accelerated rate of change in landscape, climate and society. In current engineering practice, such safety is ensured by the design of infrastructure for the Probable Maximum Precipitation (PMP). Recently, several physics-based numerical modeling approaches have been proposed to modernize the conventional and ad hoc PMP estimation approach. However, the underlying physics has not been investigated and thus differing PMP estimates are obtained without clarity on their interpretation. In this study, we present a hybrid approach that takes advantage of both traditional engineering wisdom andmore » modern climate science to estimate PMP for current and future climate conditions. The traditional PMP approach is improved and applied to outputs from an ensemble of five CMIP5 models. This hybrid approach is applied in the Pacific Northwest (PNW) to produce ensemble PMP estimation for the historical (1970-2016) and future (2050-2099) time periods. The new historical PMP estimates are verified by comparing them with the traditional estimates. PMP in the PNW will increase by 50% of the current level by 2099 under the RCP8.5 scenario. Most of the increase is caused by warming, which mainly affects moisture availability, with minor contributions from changes in storm efficiency in the future. Moist track change tends to reduce the future PMP. Compared with extreme precipitation, ensemble PMP exhibits higher internal variation. Thus high-quality data of both precipitation and related meteorological fields (temperature, wind fields) are required to reduce uncertainties in the ensemble PMP estimates.« less

  8. Current control of PMSM based on maximum torque control reference frame

    NASA Astrophysics Data System (ADS)

    Ohnuma, Takumi

    2017-07-01

    This study presents a new method of current controls of PMSMs (Permanent Magnet Synchronous Motors) based on a maximum torque control reference frame, which is suitable for high-performance controls of the PMSMs. As the issues of environment and energy increase seriously, PMSMs, one of the AC motors, are becoming popular because of their high-efficiency and high-torque density in various applications, such as electric vehicles, trains, industrial machines, and home appliances. To use the PMSMs efficiently, a proper current control of the PMSMs is necessary. In general, a rotational coordinate system synchronizing with the rotor is used for the current control of PMSMs. In the rotating reference frame, the current control is easier because the currents on the rotating reference frame can be expressed as a direct current in the controller. On the other hand, the torque characteristics of PMSMs are non-linear and complex; the PMSMs are efficient and high-density though. Therefore, a complicated control system is required to involve the relation between the torque and the current, even though the rotating reference frame is adopted. The maximum torque control reference frame provides a simpler way to control efficiently the currents taking the torque characteristics of the PMSMs into consideration.

  9. Advantages of III-nitride laser diodes in solid-state lighting: Advantages of III-nitride laser diodes in solid-state lighting

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Wierer, Jonathan J.; Tsao, Jeffrey Y.

    2015-01-14

    III-nitride laser diodes (LDs) are an interesting light source for solid-state lighting (SSL). Modelling of LDs is performed to reveal the potential advantages over traditionally used light-emitting diodes (LEDs). The first, and most notable, advantage is LDs have higher efficiency at higher currents when compared to LEDs. This is because Auger recombination that causes efficiency droop can no longer grow after laser threshold. Second, the same phosphor-converted methods used with LEDs can also be used with LDs to produce white light with similar color rendering and color temperature. Third, producing white light from color mixed emitters is equally challenging formore » both LEDs and LDs, with neither source having a direct advantage. Fourth, the LD emission is directional and can be more readily captured and focused, leading to the possibility of novel and more compact luminaires. Finally, the smaller area and higher current density operation of LDs provides them with a potential cost advantage over LEDs. These advantages make LDs a compelling source for future SSL.« less

  10. Wavelength selection in injection-driven Hele-Shaw flows: A maximum amplitude criterion

    NASA Astrophysics Data System (ADS)

    Dias, Eduardo; Miranda, Jose

    2013-11-01

    As in most interfacial flow problems, the standard theoretical procedure to establish wavelength selection in the viscous fingering instability is to maximize the linear growth rate. However, there are important discrepancies between previous theoretical predictions and existing experimental data. In this work we perform a linear stability analysis of the radial Hele-Shaw flow system that takes into account the combined action of viscous normal stresses and wetting effects. Most importantly, we introduce an alternative selection criterion for which the selected wavelength is determined by the maximum of the interfacial perturbation amplitude. The effectiveness of such a criterion is substantiated by the significantly improved agreement between theory and experiments. We thank CNPq (Brazilian Sponsor) for financial support.

  11. Is There an Islamist Political Advantage?

    PubMed Central

    Cammett, Melani; Luong, Pauline Jones

    2014-01-01

    There is a widespread presumption that Islamists have an advantage over their opponents when it comes to generating mass appeal and winning elections. The question remains, however, as to whether these advantages—or, what we refer to collectively as an Islamist political advantage—actually exist. We argue that—to the extent that Islamists have a political advantage—the primary source of this advantage is reputation rather than the provision of social services, organizational capacity, or ideological hegemony. Our purpose is not to dismiss the main sources of the Islamist governance advantage identified in scholarly literature and media accounts, but to suggest a different causal path whereby each of these factors individually and sometimes jointly promotes a reputation for Islamists as competent, trustworthy, and pure. It is this reputation for good governance that enables Islamists to distinguish themselves in the streets and at the ballot box. PMID:25767370

  12. RISK EQUIVALENT SEASONAL WASTE LOAD ALLOCATION

    EPA Science Inventory

    Seasonal wastewater discharge programs employ different effluent standards during different times of the year to take advantage of the variation in a receiving water's susceptibility to adverse impacts. These programs should try to achieve the maximum economic benefits possible w...

  13. Is bilingualism losing its advantage? A bibliometric approach

    PubMed Central

    López-Penadés, Raúl; Buil-Legaz, Lucía; Aguilar-Mediavilla, Eva; Adrover-Roig, Daniel

    2017-01-01

    This study uses several bibliometric indices to explore the temporal course of publication trends regarding the bilingual advantage in executive control over a ten-year window. These indices include the number of published papers, numbers of citations, and the journal impact factor. According to the information available in their abstracts, studies were classified into one of four categories: supporting, ambiguous towards, not mentioning, or challenging the bilingual advantage. Results show that the number of papers challenging the bilingual advantage increased notably in 2014 and 2015. Both the average impact factor and the accumulated citations as of June 2016 were equivalent between categories. However, of the studies published in 2014, those that challenge the bilingual advantage accumulated more citations in June 2016 than those supporting it. Our findings offer evidence-based bibliometric information about the current state of the literature and suggest a change in publication trends regarding the literature on the bilingual advantage. PMID:28426797

  14. 14 CFR 27.1527 - Maximum operating altitude.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maximum operating altitude. 27.1527 Section 27.1527 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... § 27.1527 Maximum operating altitude. The maximum altitude up to which operation is allowed, as limited...

  15. 24 CFR 232.903 - Maximum mortgage limitations.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Maximum mortgage limitations. 232... ASSISTED LIVING FACILITIES Insurance of Mortgages Covering Existing Projects § 232.903 Maximum mortgage limitations. Notwithstanding the maximum mortgage limitations set forth in § 232.30, a mortgage within the...

  16. 14 CFR 29.1527 - Maximum operating altitude.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maximum operating altitude. 29.1527 Section 29.1527 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... Limitations § 29.1527 Maximum operating altitude. The maximum altitude up to which operation is allowed, as...

  17. The Down Syndrome Advantage: Fact or Fiction?

    ERIC Educational Resources Information Center

    Corrice, April M.; Glidden, Laraine Masters

    2009-01-01

    The "Down syndrome advantage" is the popular conception that children with Down syndrome are easier to rear than children with other developmental disabilities. We assessed whether mothers of children with developmental disabilities would demonstrate a consistent Down syndrome advantage as their children aged from 12 to 18 years. Results did not…

  18. Muscle-Specific Effective Mechanical Advantage and Joint Impulse in Weightlifting.

    PubMed

    Kipp, Kristof; Harris, Chad

    2017-07-01

    Kipp, K, and Harris, C. Muscle-specific effective mechanical advantage and joint impulse in weightlifting. J Strength Cond Res 31(7): 1905-1910, 2017-Lifting greater loads during weightlifting exercises may theoretically be achieved through increasing the magnitudes of net joint impulses or manipulating the joints' effective mechanical advantage (EMA). The purpose of this study was to investigate muscle-specific EMA and joint impulse as well as impulse-momentum characteristics of the lifter-barbell system across a range of external loads during the execution of the clean. Collegiate-level weightlifters performed submaximal cleans at 65, 75, and 85% of their 1-repetition maximum (1-RM), whereas data from a motion analysis system and a force plate were used to calculate lifter-barbell system impulse and velocity, as well as net extensor impulse generated at the hip, knee, and ankle joints and the EMA of the gluteus maximus, hamstrings, quadriceps, and triceps surae muscles. The results indicated that the lifter-barbell system impulse did not change as load increased, whereas the velocity of the lifter-barbell system decreased with greater load. In addition, the net extensor impulse at all joints increased as load increased. The EMA of all muscles did not, however, change as load increased. The load-dependent effects on the impulse-velocity characteristics of the lifter-barbell system may reflect musculoskeletal force-velocity behaviors, and may further indicate that the weightlifting performance is limited by the magnitude of ground reaction force impulse. In turn, the load-dependent effects observed at the joint level indicated that lifting greater loads were due to greater net extensor impulses generated at the joints of the lower extremity and not greater EMAs of the respective extensor muscles. In combination, these results suggest that lifting greater external loads during the clean is due to the ability to generate large extensor joint impulses, rather than

  19. Convex Accelerated Maximum Entropy Reconstruction

    PubMed Central

    Worley, Bradley

    2016-01-01

    Maximum entropy (MaxEnt) spectral reconstruction methods provide a powerful framework for spectral estimation of nonuniformly sampled datasets. Many methods exist within this framework, usually defined based on the magnitude of a Lagrange multiplier in the MaxEnt objective function. An algorithm is presented here that utilizes accelerated first-order convex optimization techniques to rapidly and reliably reconstruct nonuniformly sampled NMR datasets using the principle of maximum entropy. This algorithm – called CAMERA for Convex Accelerated Maximum Entropy Reconstruction Algorithm – is a new approach to spectral reconstruction that exhibits fast, tunable convergence in both constant-aim and constant-lambda modes. A high-performance, open source NMR data processing tool is described that implements CAMERA, and brief comparisons to existing reconstruction methods are made on several example spectra. PMID:26894476

  20. 31 CFR 149.3 - Maximum obligation limitation.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 31 Money and Finance: Treasury 1 2014-07-01 2014-07-01 false Maximum obligation limitation. 149.3 Section 149.3 Money and Finance: Treasury Regulations Relating to Money and Finance MONETARY OFFICES, DEPARTMENT OF THE TREASURY CALCULATION OF MAXIMUM OBLIGATION LIMITATION § 149.3 Maximum obligation limitation...

  1. 40 CFR 35.175 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.175 Section 35.175 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE...)) § 35.175 Maximum federal share. The Regional Administrator may provide a maximum of 75 percent of the...

  2. 10 CFR 600.20 - Maximum DOE obligation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Maximum DOE obligation. 600.20 Section 600.20 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS FINANCIAL ASSISTANCE RULES General § 600.20 Maximum DOE obligation. (a) The maximum DOE obligation to the recipient is— (1) For monetary awards, the...

  3. 5 CFR 582.402 - Maximum garnishment limitations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Maximum garnishment limitations. 582.402... Maximum garnishment limitations. Pursuant to section 1673(a)(1) of title 15 of the United States Code (the... Federal Regulations, part 870, the following limitations are applicable: (a) Unless a lower maximum...

  4. 5 CFR 581.402 - Maximum garnishment limitations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Maximum garnishment limitations. 581.402... § 581.402 Maximum garnishment limitations. (a) Except as provided in paragraph (b) of this section... Protection Act, as amended), unless a lower maximum garnishment limitation is provided by applicable State or...

  5. 40 CFR 35.195 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.195 Section 35.195 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE... 1443(b)) § 35.195 Maximum federal share. The Regional Administrator may provide a maximum of 75 percent...

  6. Deep Inspiration Breath Hold: Techniques and Advantages for Cardiac Sparing During Breast Cancer Irradiation.

    PubMed

    Bergom, Carmen; Currey, Adam; Desai, Nina; Tai, An; Strauss, Jonathan B

    2018-01-01

    Historically, heart dose from left-sided breast radiotherapy has been associated with a risk of cardiac injury. Data suggests that there is not a threshold for the deleterious effects from radiation on the heart. Over the past several years, advances in radiation delivery techniques have reduced cardiac morbidity due to treatment. Deep inspiration breath hold (DIBH) is a technique that takes advantage of a more favorable position of the heart during inspiration to minimize heart doses over a course of radiation therapy. In the accompanying review article, we outline several methods used to deliver treatment with DIBH, quantify the benefits of DIBH treatment, discuss considerations for patient selection, and identify challenges associated with DIBH techniques.

  7. The data sharing advantage in astrophysics

    NASA Astrophysics Data System (ADS)

    Dorch, Bertil F.; Drachen, Thea M.; Ellegaard, Ole

    2016-10-01

    We present here evidence for the existence of a citation advantage within astrophysics for papers that link to data. Using simple measures based on publication data from NASA Astrophysics Data System we find a citation advantage for papers with links to data receiving on the average significantly more citations per paper than papers without links to data. Furthermore, using INSPEC and Web of Science databases we investigate whether either papers of an experimental or theoretical nature display different citation behavior.

  8. Virtual online consultations: advantages and limitations (VOCAL) study.

    PubMed

    Greenhalgh, Trisha; Vijayaraghavan, Shanti; Wherton, Joe; Shaw, Sara; Byrne, Emma; Campbell-Richards, Desirée; Bhattacharya, Satya; Hanson, Philippa; Ramoutar, Seendy; Gutteridge, Charles; Hodkinson, Isabel; Collard, Anna; Morris, Joanne

    2016-01-29

    Remote video consultations between clinician and patient are technically possible and increasingly acceptable. They are being introduced in some settings alongside (and occasionally replacing) face-to-face or telephone consultations. To explore the advantages and limitations of video consultations, we will conduct in-depth qualitative studies of real consultations (microlevel) embedded in an organisational case study (mesolevel), taking account of national context (macrolevel). The study is based in 2 contrasting clinical settings (diabetes and cancer) in a National Health Service (NHS) acute trust in London, UK. Main data sources are: microlevel--audio, video and screen capture to produce rich multimodal data on 45 remote consultations; mesolevel--interviews, ethnographic observations and analysis of documents within the trust; macrolevel--key informant interviews of national-level stakeholders and document analysis. Data will be analysed and synthesised using a sociotechnical framework developed from structuration theory. City Road and Hampstead NHS Research Ethics Committee, 9 December 2014, reference 14/LO/1883. We plan outputs for 5 main audiences: (1) academics: research publications and conference presentations; (2) service providers: standard operating procedures, provisional operational guidance and key safety issues; (3) professional bodies and defence societies: summary of relevant findings to inform guidance to members; (4) policymakers: summary of key findings; (5) patients and carers: 'what to expect in your virtual consultation'. The research literature on video consultations is sparse. Such consultations offer potential advantages to patients (who are spared the cost and inconvenience of travel) and the healthcare system (eg, they may be more cost-effective), but fears have been expressed that they may be clinically risky and/or less acceptable to patients or staff, and they bring significant technical, logistical and regulatory challenges. We

  9. Utilizing Education and Perspective Taking to Remediate the Stigma of Taking Antidepressants.

    PubMed

    Martinez, Larry R; Xu, Shi; Hebl, Michelle

    2018-05-01

    The incidence of depression has been increasing. One of the best interventions for depression is taking antidepressant medications. However, the stigma of taking antidepressants has been shown to be a barrier not only to seeking an antidepressant regimen but also adhering to it. This may have negative consequences for people who suffer from depression. Thus, in two studies, we investigate the incidence of felt stigma of taking antidepressants among clinically depressed individuals who take antidepressants and the effectiveness of two possible interventions to reduce this stigma among others. Study 1 revealed that stigma toward individuals who take antidepressants is a reality, either because people were not educated about depression and antidepressants, or because they did not show empathy or did not take on perspectives from the victim's point-of-view. Based on these results, we used an experimental design in Study 2 to investigate the effects of education and perspective-taking interventions in diminishing the stigma of taking antidepressants. These results suggest that participant gender played a moderating role in the effectiveness of education and perspective taking, such that a combination of the two interventions resulted in lower stigma for men but not for women. These results suggest that people can be trained (using a simple, low-fidelity intervention) to be more accepting of antidepressant use among their friends, family members, and colleagues, resulting in better outcomes for those who benefit from taking antidepressants.

  10. 7 CFR 3565.210 - Maximum interest rate.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Maximum interest rate. 3565.210 Section 3565.210... AGRICULTURE GUARANTEED RURAL RENTAL HOUSING PROGRAM Loan Requirements § 3565.210 Maximum interest rate. The interest rate for a guaranteed loan must not exceed the maximum allowable rate specified by the Agency in...

  11. 49 CFR 1503.401 - Maximum penalty amounts.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Maximum penalty amounts. 1503.401 Section 1503.401... Assessment of Civil Penalties by TSA § 1503.401 Maximum penalty amounts. (a) General. TSA may assess civil.... TSA may adjust the maximum civil penalty amounts in conformity with the Federal Civil Penalties...

  12. 34 CFR 682.204 - Maximum loan amounts.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 3 2010-07-01 2010-07-01 false Maximum loan amounts. 682.204 Section 682.204 Education..., DEPARTMENT OF EDUCATION FEDERAL FAMILY EDUCATION LOAN (FFEL) PROGRAM General Provisions § 682.204 Maximum... a full academic year, the maximum annual amount that the student may receive may not exceed the...

  13. 40 CFR 35.675 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.675 Section... (section 1443(a) and Section 1451) § 35.675 Maximum federal share. (a) The Regional Administrator may... maximum federal share if the Tribe or Intertribal Consortium can demonstrate in writing to the...

  14. Relationship of maximum strength to weightlifting performance.

    PubMed

    Stone, Michael H; Sands, William A; Pierce, Kyle C; Carlock, Jon; Cardinale, Marco; Newton, Robert U

    2005-06-01

    The primary objective was to assess the relationship of maximum strength to weightlifting ability using established scaling methods. The secondary objective was to compare men and women weightlifters on strength and weightlifting ability. Two correlational observations were carried out using Pearson's r. In the first observation (N = 65) the relationship of dynamic maximum strength (one-repetition maximum (1RM) squat) was compared with weightlifting ability; in the second observation (N = 16), isometric maximum strength (midthigh pull) was studied. Scaling methods for equating maximum strength and weightlifting results were used (load x (Ht), load x kg, load x lbm(-1), allometric, and Sinclair formula) to assess the association between measures of maximum strength and weightlifting performance. Using scaled values; correlations between maximum strength and weightlifting results were generally strong in both observations (e.g., using allometric scaling for the 1RM squat vs the 1RM snatch: r = 0.84, N = 65). Men were stronger than women (e.g., 1RM squat, N = 65: men = 188.1 +/- 48.6 kg; women = 126.7 +/- 28.3 kg); differences generally held when scaling was applied (e.g., 1RM squat scaled with the Sinclair formula: men = 224.7 +/- 36.5 kg; women = 144.2 +/- 25.4 kg). When collectively considering scaling methods, maximum strength is strongly related to weightlifting performance independent of body mass and height differences. Furthermore, men are stronger than women even when body mass and height are obviated by scaling methods.

  15. Home advantage in the Winter Paralympic Games 1976-2014.

    PubMed

    Wilson, Darryl; Ramchandani, Girish

    2017-01-01

    There is a limited amount of home advantage research concerned with winter sports. There is also a distinct lack of studies that investigate home advantage in the context of para sport events. This paper addresses this gap in the knowledge by examining home advantage in the Winter Paralympic Games. Using a standardised measure of success, we compared the performances of host nations at home with their own performances away from home between 1976 and 2014. Both country level and individual sport level analysis is conducted for this time period. Comparisons are also drawn with the Winter Olympic Games since 1992, the point from which both the Winter Olympic Games and the Winter Paralympic Games have been hosted by the same nations and in the same years. Clear evidence of a home advantage effect in the Winter Paralympic Games was found at country level. When examining individual sports, only alpine skiing and cross country skiing returned a significant home advantage effect. When comparing home advantage in the Winter Paralympic Games with the Winter Olympic Games for the last seven host nations (1992-2014), we found that home advantage was generally more pronounced (although not a statistically significant difference) in the case of the former. The causes of home advantage in the Winter Paralympic Games are unclear and should be investigated further.

  16. 22 CFR 201.67 - Maximum freight charges.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Maximum freight charges. 201.67 Section 201.67... TRANSACTIONS FINANCED BY USAID Price Provisions § 201.67 Maximum freight charges. (a) Ocean freight rates—(1... the United States. (2) Maximum charter rates. (i) USAID will not finance ocean freight under any...

  17. 40 CFR 35.635 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.635 Section... (sections 319(h) and 518(f)) § 35.635 Maximum federal share. (a) The Regional Administrator may provide up... be provided from non-federal sources. (b) The Regional Administrator may increase the maximum federal...

  18. 40 CFR 35.575 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.575 Section...) § 35.575 Maximum federal share. (a) For Tribes and Intertribal Consortia eligible under § 35.573(a... the maximum federal share to 90 percent if the Regional Administrator determines that the Tribe or...

  19. 40 CFR 35.685 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.685 Section... (section 1443(b)) § 35.685 Maximum federal share. (a) The Regional Administrator may provide up to 75 percent of the approved work plan costs. (b) The Regional Administrator may increase the maximum federal...

  20. 5 CFR 550.105 - Biweekly maximum earnings limitation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Biweekly maximum earnings limitation. 550... PAY ADMINISTRATION (GENERAL) Premium Pay Maximum Earnings Limitations § 550.105 Biweekly maximum... basic pay and premium pay for any biweekly pay period to exceed the greater of— (1) The maximum biweekly...

  1. 5 CFR 550.106 - Annual maximum earnings limitation.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Annual maximum earnings limitation. 550... PAY ADMINISTRATION (GENERAL) Premium Pay Maximum Earnings Limitations § 550.106 Annual maximum... and premium pay for the calendar year to exceed the greater of— (1) The maximum annual rate of basic...

  2. 7 CFR 15f.3 - If I want to use these procedures to have USDA consider my complaint, how long will it take for...

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 1 2014-01-01 2014-01-01 false If I want to use these procedures to have USDA consider my complaint, how long will it take for USDA to make a decision? 15f.3 Section 15f.3 Agriculture... USDA consider my complaint, how long will it take for USDA to make a decision? To the maximum extent...

  3. 7 CFR 15f.3 - If I want to use these procedures to have USDA consider my complaint, how long will it take for...

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 1 2012-01-01 2012-01-01 false If I want to use these procedures to have USDA consider my complaint, how long will it take for USDA to make a decision? 15f.3 Section 15f.3 Agriculture... USDA consider my complaint, how long will it take for USDA to make a decision? To the maximum extent...

  4. 7 CFR 15f.3 - If I want to use these procedures to have USDA consider my complaint, how long will it take for...

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 1 2010-01-01 2010-01-01 false If I want to use these procedures to have USDA consider my complaint, how long will it take for USDA to make a decision? 15f.3 Section 15f.3 Agriculture... USDA consider my complaint, how long will it take for USDA to make a decision? To the maximum extent...

  5. 7 CFR 15f.3 - If I want to use these procedures to have USDA consider my complaint, how long will it take for...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 1 2011-01-01 2011-01-01 false If I want to use these procedures to have USDA consider my complaint, how long will it take for USDA to make a decision? 15f.3 Section 15f.3 Agriculture... USDA consider my complaint, how long will it take for USDA to make a decision? To the maximum extent...

  6. 7 CFR 15f.3 - If I want to use these procedures to have USDA consider my complaint, how long will it take for...

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 1 2013-01-01 2013-01-01 false If I want to use these procedures to have USDA consider my complaint, how long will it take for USDA to make a decision? 15f.3 Section 15f.3 Agriculture... USDA consider my complaint, how long will it take for USDA to make a decision? To the maximum extent...

  7. 31 CFR 351.67 - What happens if any person purchases book-entry Series EE savings bonds in excess of the maximum...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... bonds in excess of the maximum annual amount? We reserve the right to take any action we deem necessary to adjust the excess, including the right to remove the excess bonds from your New Treasury Direct account and refund the payment price to your bank account of record using the ACH method of payment. ...

  8. HOW MUCH FAVORABLE SELECTION IS LEFT IN MEDICARE ADVANTAGE?

    PubMed Central

    PRICE, MARY; MCWILLIAMS, J. MICHAEL; HSU, JOHN; MCGUIRE, THOMAS G.

    2015-01-01

    The health economics literature contains two models of selection, one with endogenous plan characteristics to attract good risks and one with fixed plan characteristics; neither model contains a regulator. Medicare Advantage, a principal example of selection in the literature, is, however, subject to anti-selection regulations. Because selection causes economic inefficiency and because the historically favorable selection into Medicare Advantage plans increased government cost, the effectiveness of the anti-selection regulations is an important policy question, especially since the Medicare Advantage program has grown to comprise 30 percent of Medicare beneficiaries. Moreover, similar anti-selection regulations are being used in health insurance exchanges for those under 65. Contrary to earlier work, we show that the strengthened anti-selection regulations that Medicare introduced starting in 2004 markedly reduced government overpayment attributable to favorable selection in Medicare Advantage. At least some of the remaining selection is plausibly related to fixed plan characteristics of Traditional Medicare versus Medicare Advantage rather than changed selection strategies by Medicare Advantage plans. PMID:26389127

  9. Unstop the Logjams in Your Cash Flow.

    ERIC Educational Resources Information Center

    Everett, R. E.

    1989-01-01

    A cash flow analysis is charting expenditures and revenues against a factor of time. Explains how school systems can, by charting the congruency of revenues and expenditures carefully, develop an investment program to take maximum advantage of a positive cash position. (MLF)

  10. 29 CFR 778.100 - The maximum-hours provisions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false The maximum-hours provisions. 778.100 Section 778.100 Labor... Requirements Introductory § 778.100 The maximum-hours provisions. Section 7(a) of the Act deals with maximum... specifically exempt from its overtime pay requirements. It prescribes the maximum weekly hours of work...

  11. 29 CFR 778.101 - Maximum nonovertime hours.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Maximum nonovertime hours. 778.101 Section 778.101 Labor... Requirements Introductory § 778.101 Maximum nonovertime hours. As a general standard, section 7(a) of the Act provides 40 hours as the maximum number that an employee subject to its provisions may work for an employer...

  12. Advantages and Challenges of Radiative Liquid Lithium Divertor

    NASA Astrophysics Data System (ADS)

    Ono, Masayuki

    2017-10-01

    Steady-state fusion power plant designs present major divertor technology challenges, including high divertor heat flux both in steady-state and during transients. In addition to these concerns, there are the unresolved technology issues of long term dust accumulation and associated tritium inventory and safety issues. The application of lithium (Li) in NSTX resulted in improved H-mode confinement, H-mode power threshold reduction, and reduction in the divertor peak heat flux while maintaining essentially Li-free core plasma operation even during H-modes. These promising results in NSTX and related modeling calculations motivated the radiative liquid Li divertor (RLLD) concept and its variant, the active liquid Li divertor concept (ARLLD), taking advantage of the enhanced Li radiation in relatively poorly confined divertor plasmas. It has been suggested that radiation-based liquid lithium (LL) divertor concepts with a modest Li-loop could provide a possible solution for the outstanding fusion reactor technology issues such as divertor heat flux mitigation and real time dust removal, while potentially improving the reactor plasma performance. Laboratory tests are also planned to investigate the Li-T recover efficiency and other relevant research topics of the RLLD. This work supported by DoE Contract No. DE-AC02-09CH11466.

  13. Watershed Regressions for Pesticides (WARP) for Predicting Annual Maximum and Annual Maximum Moving-Average Concentrations of Atrazine in Streams

    USGS Publications Warehouse

    Stone, Wesley W.; Gilliom, Robert J.; Crawford, Charles G.

    2008-01-01

    Regression models were developed for predicting annual maximum and selected annual maximum moving-average concentrations of atrazine in streams using the Watershed Regressions for Pesticides (WARP) methodology developed by the National Water-Quality Assessment Program (NAWQA) of the U.S. Geological Survey (USGS). The current effort builds on the original WARP models, which were based on the annual mean and selected percentiles of the annual frequency distribution of atrazine concentrations. Estimates of annual maximum and annual maximum moving-average concentrations for selected durations are needed to characterize the levels of atrazine and other pesticides for comparison to specific water-quality benchmarks for evaluation of potential concerns regarding human health or aquatic life. Separate regression models were derived for the annual maximum and annual maximum 21-day, 60-day, and 90-day moving-average concentrations. Development of the regression models used the same explanatory variables, transformations, model development data, model validation data, and regression methods as those used in the original development of WARP. The models accounted for 72 to 75 percent of the variability in the concentration statistics among the 112 sampling sites used for model development. Predicted concentration statistics from the four models were within a factor of 10 of the observed concentration statistics for most of the model development and validation sites. Overall, performance of the models for the development and validation sites supports the application of the WARP models for predicting annual maximum and selected annual maximum moving-average atrazine concentration in streams and provides a framework to interpret the predictions in terms of uncertainty. For streams with inadequate direct measurements of atrazine concentrations, the WARP model predictions for the annual maximum and the annual maximum moving-average atrazine concentrations can be used to characterize

  14. Evaluation of comparative advantages in the profitability and competitiveness of the small-scale dairy system of Tulancingo Valley, Mexico.

    PubMed

    Posadas-Domínguez, Rodolfo Rogelio; Del Razo-Rodríguez, Oscar Enrique; Almaraz-Buendía, Isaac; Pelaez-Acero, Armando; Espinosa-Muñoz, Verónica; Rebollar-Rebollar, Samuel; Salinas-Martínez, Jesús Armando

    2018-06-01

    This article combines a Policy Analysis Matrix with a sensitivity and poverty line analysis with the objective of evaluating the economic contribution of comparative advantages to the private profitability and competitiveness of small-scale dairy systems. For 1 year, socioeconomic data were collected from 82 farms selected from four strata via statistical sampling. Two scenarios were established to determine the quantitative contribution of comparative advantages: (1) a simulated scenario, which accounted for the cost of purchasing the total food and the opportunity cost of the family labour force (FLF), and (2) an actual production scenario, which accounted for the cost of producing food and eliminating the payment of the FLF and included other income. The E3 and E4 producers were the most profitable and competitive in the simulated scenario and actual production scenario. Of the four scales evaluated, the E2 and E1 producers were the most efficient in taking advantage of the economic contribution provided by the comparative advantages in their own production of food and employment of the FLF, in addition to accounting for other income, a condition that increased their profitability by 171 and 144% and competitiveness by 346 and 273%, respectively. The poverty results indicated that only E3 and E4 producers were non-vulnerable in the simulated scenario and actual production scenario. The purchase of food was the comparative advantage with the greatest sensitivity to cost increases in the two scenarios analysed, which exacerbated the effect on the E1 and E2 producers.

  15. Probabilistic description of probable maximum precipitation

    NASA Astrophysics Data System (ADS)

    Ben Alaya, Mohamed Ali; Zwiers, Francis W.; Zhang, Xuebin

    2017-04-01

    Probable Maximum Precipitation (PMP) is the key parameter used to estimate probable Maximum Flood (PMF). PMP and PMF are important for dam safety and civil engineering purposes. Even if the current knowledge of storm mechanisms remains insufficient to properly evaluate limiting values of extreme precipitation, PMP estimation methods are still based on deterministic consideration, and give only single values. This study aims to provide a probabilistic description of the PMP based on the commonly used method, the so-called moisture maximization. To this end, a probabilistic bivariate extreme values model is proposed to address the limitations of traditional PMP estimates via moisture maximization namely: (i) the inability to evaluate uncertainty and to provide a range PMP values, (ii) the interpretation that a maximum of a data series as a physical upper limit (iii) and the assumption that a PMP event has maximum moisture availability. Results from simulation outputs of the Canadian Regional Climate Model CanRCM4 over North America reveal the high uncertainties inherent in PMP estimates and the non-validity of the assumption that PMP events have maximum moisture availability. This later assumption leads to overestimation of the PMP by an average of about 15% over North America, which may have serious implications for engineering design.

  16. Efficiency at maximum power for an isothermal chemical engine with particle exchange at varying chemical potential

    NASA Astrophysics Data System (ADS)

    Koning, Jesper; Koga, Kenichiro; Indekeu, Joseph. O.

    2017-02-01

    We calculate the efficiency at maximum power (EMP) of an isothermal chemical cycle in which particle uptake occurs at a fixed chemical potential but particle release takes place at varying chemical potential. We obtain the EMP as a function of Δμ/ kT, where Δμ is the difference between the highest and lowest reservoir chemical potentials and T is the absolute temperature. In the linear response limit, Δμ ≪ kT, the EMP tends to the expected universal value 1/2.

  17. 7 CFR 1778.11 - Maximum grants.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Maximum grants. 1778.11 Section 1778.11 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE (CONTINUED) EMERGENCY AND IMMINENT COMMUNITY WATER ASSISTANCE GRANTS § 1778.11 Maximum grants. (a) Grants not...

  18. 24 CFR 200.15 - Maximum mortgage.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Maximum mortgage. 200.15 Section 200.15 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued... Eligibility Requirements for Existing Projects Eligible Mortgage § 200.15 Maximum mortgage. Mortgages must not...

  19. 7 CFR 993.602 - Maximum tolerances.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Maximum tolerances. 993.602 Section 993.602 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... CALIFORNIA Grade Regulations § 993.602 Maximum tolerances. In lieu of the provision prescribed in I C of...

  20. 14 CFR 65.47 - Maximum hours.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Maximum hours. 65.47 Section 65.47 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIRMEN CERTIFICATION: AIRMEN OTHER THAN FLIGHT CREWMEMBERS Air Traffic Control Tower Operators § 65.47 Maximum hours...

  1. The advantages and disadvantages of using high technology in hand rehabilitation.

    PubMed

    Levanon, Yafi

    2013-01-01

    A brief review of the history of occupational therapy shows that the relationship between health and activity was of great concern to the founders of the Occupational Therapy (OT) field, and continues to be of concern to today's occupational therapists. Today, computers and Virtual Reality (VR) take the place of clay and the weaving loom. The goal of this article is to describe both known and innovative computerized equipment being used in interventions for hand rehabilitation and evaluations, as well as answer the question: 'what are the advantages and disadvantages of using technology in hand rehabilitation?' Our conclusion, based on clinical experience and supported by the literature, appears to emphasize that advanced technology can enrich treatment and help patients who are unable to visit the clinic regularly, to get appropriate treatment. However, advanced technology has not been found to be superior to traditional treatment and cannot replace the occupational therapist. Copyright © 2013 Hanley & Belfus. Published by Elsevier Inc. All rights reserved.

  2. Home advantage in the Six Nations Rugby Union tournament.

    PubMed

    Thomas, Sion; Reeves, Colin; Bell, Andrew

    2008-02-01

    This study examined whether home advantage occurred in the Six Nations Rugby Union tournament. Data were gathered using the final championship standings from the tournament's inception in 2000 to the recently completed 2007 season. Home advantage for each championship season was defined as the number of points won by teams playing at home, expressed as a percentage of all points gained either at home or away. An analysis of home advantage for each of eight seasons of competition ranged from 53% (2005) to 70% (2006). There was an overall statistically significant home advantage of 61% for 120 matches played in the Six Nations tournament between 2000 and 2007. Also analysed were the percentage of points won at home by each country. Again, evidence supported home advantage amongst all competing nations regardless of the team's quality.

  3. Mean common or mean maximum carotid intima-media thickness as primary outcome in lipid-modifying intervention studies.

    PubMed

    Dogan, Soner; Kastelein, Johannes Jacob Pieter; Grobbee, Diederick Egbertus; Bots, Michiel Leonardus

    2011-01-01

    Carotid intima-media thickness (CIMT) measurements are used as a disease outcome in randomized controlled trials that assess the effects of lipid-modifying treatment. It is unclear whether common CIMT or mean maximum CIMT should be used as the primary outcome. We directly compared both measurements using aspects that are of great importance in deciding which is most favorable for use in clinical trials. A literature search was performed (PUBMED, up to March 31, 2008). Fifteen trials with lipid-modifying treatment were identified that had information on both outcome measures. Common CIMT and mean maximum CIMT were compared on reproducibility, strength of relation with LDL and HDL cholesterol and congruency of their results (harm/neutral/beneficial) with data from event trials. Findings showed that the reported reproducibility was high for both measurements, although a direct comparison was not possible. The relationship between the achieved LDL-C and HDL-C levels with CIMT progression was modest and showed no difference in magnitude between CIMT measurements. CIMT progression rates differed across carotid segments with the highest progression rates observed in the bifurcation segment. Treatment effects differed across carotid segments without a clear preference pattern. Trials using mean maximum CIMT progression more often (12 out of 15 studies) paralleled the findings of event trials in contrast to the mean common CIMT (11 out of 15 studies), a difference not reaching statistical significance. Based on the literature, with equal results for reproducibility (assumed), lipid relationship and congruency with event findings, but with treatment effects that differ across carotid segments that can not be predicted, the mean maximum CIMT as the primary outcome may be preferred in trials on the impact of lipid-modifying interventions. One advantage is that information on mean common CIMT can generally be obtained easily in protocols assessing mean maximum CIMT, but not the

  4. 40 CFR 141.66 - Maximum contaminant levels for radionuclides.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 24 2012-07-01 2012-07-01 false Maximum contaminant levels for... Regulations: Maximum Contaminant Levels and Maximum Residual Disinfectant Levels § 141.66 Maximum contaminant levels for radionuclides. (a) [Reserved] (b) MCL for combined radium-226 and -228. The maximum...

  5. 40 CFR 141.66 - Maximum contaminant levels for radionuclides.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 23 2014-07-01 2014-07-01 false Maximum contaminant levels for... Regulations: Maximum Contaminant Levels and Maximum Residual Disinfectant Levels § 141.66 Maximum contaminant levels for radionuclides. (a) [Reserved] (b) MCL for combined radium-226 and -228. The maximum...

  6. 40 CFR 141.66 - Maximum contaminant levels for radionuclides.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 24 2013-07-01 2013-07-01 false Maximum contaminant levels for... Regulations: Maximum Contaminant Levels and Maximum Residual Disinfectant Levels § 141.66 Maximum contaminant levels for radionuclides. (a) [Reserved] (b) MCL for combined radium-226 and -228. The maximum...

  7. 40 CFR 141.66 - Maximum contaminant levels for radionuclides.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Maximum contaminant levels for... Regulations: Maximum Contaminant Levels and Maximum Residual Disinfectant Levels § 141.66 Maximum contaminant levels for radionuclides. (a) [Reserved] (b) MCL for combined radium-226 and -228. The maximum...

  8. Project safety as a sustainable competitive advantage.

    PubMed

    Rechenthin, David

    2004-01-01

    To be consistently profitable, a construction company must complete projects in scope, on schedule, and on budget. At the same time, the nature of the often high-risk work performed by construction companies can result in high accident rates. Clients and other stakeholders are placing increasing pressure on companies to decrease those accident rates. Clients routinely demand copies of safety plans and evidence of past results at the "pre-qualification" or "request for proposal" stages of the procurement process. Are high accident rates and the associated costs just a part of business? Companies that deliver on scope, schedule, and budget have a competitive advantage. Is it possible for projects with low accident rates to use it as a competitive advantage? Is the value added by safety just a temporary or parity issue, or does a successful safety program offer significant advantage to the company and the client? This article concludes that in the case of a high-risk industry, such as the construction industry, an organization with a successful safety program can promote safety performance as a sustainable competitive advantage. It is a choice the company can make.

  9. 13 CFR 130.440 - Maximum grant.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Maximum grant. 130.440 Section 130.440 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS DEVELOPMENT CENTERS § 130.440 Maximum grant. No recipient shall receive an SBDC grant exceeding the greater of the minimum...

  10. 13 CFR 130.440 - Maximum grant.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Maximum grant. 130.440 Section 130.440 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS DEVELOPMENT CENTERS § 130.440 Maximum grant. No recipient shall receive an SBDC grant exceeding the greater of the minimum...

  11. Effect of ethanol on psychomotor performance and on risk taking behaviour.

    PubMed

    Farquhar, K; Lambert, K; Drummond, G B; Tiplady, B; Wright, P

    2002-12-01

    Ethanol may increase the willingness to take risks, but this issue remains controversial. We used a risk-taking paradigm in which volunteers answered a series of general knowledge questions with numerical answers and were asked to judge the length of a line that would just fit into a given gap. A maximum score was given for an exactly correct answer. For answers that were less than the correct value, the score was reduced gradually to zero, while answers even slightly over the correct value were penalized considerably. Total points were rewarded by cash payments, so volunteers were taking real risks when making their responses. Performance was assessed in a two-period, double-blind crossover study, comparing ethanol (0.7 g/kg) with placebo in 20 female volunteers aged 19-20 years. Tests were carried out before and at 45 min after dosing. Mean (SD) ethanol blood alcohol concentrations were 65 (10.5) mg/100 ml. Ethanol impaired the skill/ability measure of the length estimation test (SD of difference between length of line and gap), which increased from 5.9 to 6.6 (p < 0.05), indicating a reduced accuracy of estimation. The risk measures in both tasks were not significantly affected. The skill/ability measure in the general knowledge task was not significantly affected. Other performance tests showed that ethanol produced the expected impairment of both speed and accuracy. These results suggest that risk-taking is not increased by ethanol at doses approaching the UK legal limit for driving.

  12. 33 CFR 401.29 - Maximum draft.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 3 2014-07-01 2014-07-01 false Maximum draft. 401.29 Section 401... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.29 Maximum draft. (a) Notwithstanding any provision herein, the loading of cargo, draft and speed of a vessel in transit shall be...

  13. 33 CFR 401.29 - Maximum draft.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Maximum draft. 401.29 Section 401... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.29 Maximum draft. (a) Notwithstanding any provision herein, the loading of cargo, draft and speed of a vessel in transit shall be...

  14. 34 CFR 674.12 - Loan maximums.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ..., DEPARTMENT OF EDUCATION FEDERAL PERKINS LOAN PROGRAM General Provisions § 674.12 Loan maximums. (a) The maximum annual amount of Federal Perkins Loans and NDSLs an eligible student may borrow is— (1) $5,500 for... professional student. (b) The aggregate unpaid principal amount of all Federal Perkins Loans and NDSLs received...

  15. Tomographic Image Compression Using Multidimensional Transforms.

    ERIC Educational Resources Information Center

    Villasenor, John D.

    1994-01-01

    Describes a method for compressing tomographic images obtained using Positron Emission Tomography (PET) and Magnetic Resonance (MR) by applying transform compression using all available dimensions. This takes maximum advantage of redundancy of the data, allowing significant increases in compression efficiency and performance. (13 references) (KRN)

  16. 48 CFR 39.103 - Modular contracting.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... increments to take advantage of any evolution in technology or needs that occur during implementation and use... CATEGORIES OF CONTRACTING ACQUISITION OF INFORMATION TECHNOLOGY General 39.103 Modular contracting. (a) This... technology. Consistent with the agency's information technology architecture, agencies should, to the maximum...

  17. The advantages and limitations of guideline adaptation frameworks.

    PubMed

    Wang, Zhicheng; Norris, Susan L; Bero, Lisa

    2018-05-29

    The implementation of evidence-based guidelines can improve clinical and public health outcomes by helping health professionals practice in the most effective manner, as well as assisting policy-makers in designing optimal programs. Adaptation of a guideline to suit the context in which it is intended to be applied can be a key step in the implementation process. Without taking the local context into account, certain interventions recommended in evidence-based guidelines may be infeasible under local conditions. Guideline adaptation frameworks provide a systematic way of approaching adaptation, and their use may increase transparency, methodological rigor, and the quality of the adapted guideline. This paper presents a number of adaptation frameworks that are currently available. We aim to compare the advantages and limitations of their processes, methods, and resource implications. These insights into adaptation frameworks can inform the future development of guidelines and systematic methods to optimize their adaptation. Recent adaptation frameworks show an evolution from adapting entire existing guidelines, to adapting specific recommendations extracted from an existing guideline, to constructing evidence tables for each recommendation that needs to be adapted. This is a move towards more recommendation-focused, context-specific processes and considerations. There are still many gaps in knowledge about guideline adaptation. Most of the frameworks reviewed lack any evaluation of the adaptation process and outcomes, including user satisfaction and resources expended. The validity, usability, and health impact of guidelines developed via an adaptation process have not been studied. Lastly, adaptation frameworks have not been evaluated for use in low-income countries. Despite the limitations in frameworks, a more systematic approach to adaptation based on a framework is valuable, as it helps to ensure that the recommendations stay true to the evidence while taking

  18. Application of an improved maximum correlated kurtosis deconvolution method for fault diagnosis of rolling element bearings

    NASA Astrophysics Data System (ADS)

    Miao, Yonghao; Zhao, Ming; Lin, Jing; Lei, Yaguo

    2017-08-01

    The extraction of periodic impulses, which are the important indicators of rolling bearing faults, from vibration signals is considerably significance for fault diagnosis. Maximum correlated kurtosis deconvolution (MCKD) developed from minimum entropy deconvolution (MED) has been proven as an efficient tool for enhancing the periodic impulses in the diagnosis of rolling element bearings and gearboxes. However, challenges still exist when MCKD is applied to the bearings operating under harsh working conditions. The difficulties mainly come from the rigorous requires for the multi-input parameters and the complicated resampling process. To overcome these limitations, an improved MCKD (IMCKD) is presented in this paper. The new method estimates the iterative period by calculating the autocorrelation of the envelope signal rather than relies on the provided prior period. Moreover, the iterative period will gradually approach to the true fault period through updating the iterative period after every iterative step. Since IMCKD is unaffected by the impulse signals with the high kurtosis value, the new method selects the maximum kurtosis filtered signal as the final choice from all candidates in the assigned iterative counts. Compared with MCKD, IMCKD has three advantages. First, without considering prior period and the choice of the order of shift, IMCKD is more efficient and has higher robustness. Second, the resampling process is not necessary for IMCKD, which is greatly convenient for the subsequent frequency spectrum analysis and envelope spectrum analysis without resetting the sampling rate. Third, IMCKD has a significant performance advantage in diagnosing the bearing compound-fault which expands the application range. Finally, the effectiveness and superiority of IMCKD are validated by a number of simulated bearing fault signals and applying to compound faults and single fault diagnosis of a locomotive bearing.

  19. Ontogeny of energy allocation reveals selective pressure promoting risk-taking behaviour in young fish cohorts

    PubMed Central

    Biro, Peter A; Post, John R; Abrahams, Mark V

    2005-01-01

    Given limited food, prey fishes in a temperate climate must take risks to acquire sufficient reserves for winter and/or to outgrow vulnerability to predation. However, how can we distinguish which selective pressure promotes risk-taking when larger body size is always beneficial? To address this question, we examined patterns of energy allocation in populations of age-0 trout to determine if greater risk-taking corresponds with energy allocation to lipids or to somatic growth. Trout achieved maximum growth rates in all lakes and allocated nearly all of their acquired energy to somatic growth when small in early summer. However, trout in low-food lakes took greater risks to achieve this maximal growth, and therefore incurred high mortality. By late summer, age-0 trout allocated considerable energy to lipids and used previously risky habitats in all lakes. These results indicate that: (i) the size-dependent risk of predation (which is independent of behaviour) promotes risk-taking behaviour of age-0 trout to increase growth and minimize time spent in vulnerable sizes; and (ii) the physiology of energy allocation and behaviour interact to mediate growth/mortality trade-offs for young animals at risk of predation and starvation. PMID:16011918

  20. 49 CFR 107.329 - Maximum penalties.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... violation, except the maximum civil penalty is $175,000 if the violation results in death, serious illness... civil penalty is $175,000 if the violation results in death, serious illness or severe injury to any... 49 Transportation 2 2014-10-01 2014-10-01 false Maximum penalties. 107.329 Section 107.329...

  1. 49 CFR 107.329 - Maximum penalties.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... violation, except the maximum civil penalty is $175,000 if the violation results in death, serious illness... civil penalty is $175,000 if the violation results in death, serious illness or severe injury to any... 49 Transportation 2 2013-10-01 2013-10-01 false Maximum penalties. 107.329 Section 107.329...

  2. Intergroup Contact and Social Change: Implications of Negative and Positive Contact for Collective Action in Advantaged and Disadvantaged Groups.

    PubMed

    Reimer, Nils Karl; Becker, Julia C; Benz, Angelika; Christ, Oliver; Dhont, Kristof; Klocke, Ulrich; Neji, Sybille; Rychlowska, Magdalena; Schmid, Katharina; Hewstone, Miles

    2017-01-01

    Previous research has shown that (a) positive intergroup contact with an advantaged group can discourage collective action among disadvantaged-group members and (b) positive intergroup contact can encourage advantaged-group members to take action on behalf of disadvantaged outgroups. Two studies investigated the effects of negative as well as positive intergroup contact. Study 1 ( n = 482) found that negative but not positive contact with heterosexual people was associated with sexual-minority students' engagement in collective action (via group identification and perceived discrimination). Among heterosexual students, positive and negative contacts were associated with, respectively, more and less LGB (lesbian, gay, bisexual) activism. Study 2 ( N = 1,469) found that only negative contact (via perceived discrimination) predicted LGBT (lesbian, gay, bisexual, and transgender) students' collective action intentions longitudinally while only positive contact predicted heterosexual/cisgender students' LGBT activism. Implications for the relationship between intergroup contact, collective action, and social change are discussed.

  3. The different ways to obtain digital images of urine microscopy findings: Their advantages and limitations.

    PubMed

    Fogazzi, G B; Garigali, G

    2017-03-01

    We describe three ways to take digital images of urine sediment findings. Way 1 encompasses a digital camera permanently mounted on the microscope and connected with a computer equipped with a proprietary software to acquire, process and store the images. Way 2 is based on the use of inexpensive compact digital cameras, held by hands - or mounted on a tripod - close to one eyepiece of the microscope. Way 3 is based on the use of smartphones, held by hands close to one eyepiece of the microscope or connected to the microscope by an adapter. The procedures, advantages and limitations of each way are reported. Copyright © 2017. Published by Elsevier B.V.

  4. Understanding the competitive advantage of TPP-related nations from an econophysics perspective: Influence caused by China and the United States

    NASA Astrophysics Data System (ADS)

    Xing, Lizhi; Guan, Jun; Dong, Xianlei; Wu, Shan

    2018-07-01

    A new analytical framework of relatively competitive advantages of economies is established in this paper, which involves distinguishing functions of industrial sectors on the global value chain with bipartite graph theory and extracting inter-sector competitive relations through resource allocation process. Furthermore, it introduces network-based quantitative indices to measure the competitive advantage on the level of industrial sector and country respectively, taking scarcity of industrial resources into consideration. Finally, it carries out scenario simulation to analyze impacts on 13 TPP-related countries' competitiveness under four kinds of scenarios. Results show that a TPP without both the United States and China will undermine the two countries' competitiveness, and China's impact on GVC will be truly weaken if a TPP agreement led by the United States is reached and vice versa. Anyway, A TPP including both these two countries would serve the mutual interests

  5. 5 CFR 9701.312 - Maximum rates.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 5 Administrative Personnel 3 2013-01-01 2013-01-01 false Maximum rates. 9701.312 Section 9701.312... MANAGEMENT SYSTEM Pay and Pay Administration Overview of Pay System § 9701.312 Maximum rates. (a) DHS may not pay any employee an annual rate of basic pay in excess of the rate for level III of the Executive...

  6. 5 CFR 9701.312 - Maximum rates.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 5 Administrative Personnel 3 2012-01-01 2012-01-01 false Maximum rates. 9701.312 Section 9701.312... MANAGEMENT SYSTEM Pay and Pay Administration Overview of Pay System § 9701.312 Maximum rates. (a) DHS may not pay any employee an annual rate of basic pay in excess of the rate for level III of the Executive...

  7. 5 CFR 9701.312 - Maximum rates.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 5 Administrative Personnel 3 2011-01-01 2011-01-01 false Maximum rates. 9701.312 Section 9701.312... MANAGEMENT SYSTEM Pay and Pay Administration Overview of Pay System § 9701.312 Maximum rates. (a) DHS may not pay any employee an annual rate of basic pay in excess of the rate for level III of the Executive...

  8. 19 CFR 114.23 - Maximum period.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Maximum period. 114.23 Section 114.23 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY CARNETS Processing of Carnets § 114.23 Maximum period. (a) A.T.A. carnet. No A.T.A. carnet with a period...

  9. 14 CFR 23.1524 - Maximum passenger seating configuration.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maximum passenger seating configuration. 23.1524 Section 23.1524 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... Operating Limitations and Information § 23.1524 Maximum passenger seating configuration. The maximum...

  10. Maximum margin multiple instance clustering with applications to image and text clustering.

    PubMed

    Zhang, Dan; Wang, Fei; Si, Luo; Li, Tao

    2011-05-01

    In multiple instance learning problems, patterns are often given as bags and each bag consists of some instances. Most of existing research in the area focuses on multiple instance classification and multiple instance regression, while very limited work has been conducted for multiple instance clustering (MIC). This paper formulates a novel framework, maximum margin multiple instance clustering (M(3)IC), for MIC. However, it is impractical to directly solve the optimization problem of M(3)IC. Therefore, M(3)IC is relaxed in this paper to enable an efficient optimization solution with a combination of the constrained concave-convex procedure and the cutting plane method. Furthermore, this paper presents some important properties of the proposed method and discusses the relationship between the proposed method and some other related ones. An extensive set of empirical results are shown to demonstrate the advantages of the proposed method against existing research for both effectiveness and efficiency.

  11. Maximum performance synergy: A new approach to recording studio control room design

    NASA Astrophysics Data System (ADS)

    Szymanski, Jeff D.

    2003-10-01

    Popular recording studio control room designs include LEDE(tm), RFZ(tm), and nonenvironment rooms. The common goal of all of these is to create an accurate acoustical environment that does not distort or otherwise color audio reproduction. Also common to these designs is the frequent need to have multiple ancillary recording rooms, often adjacent to the main control room, where group members perform. This approach, where group members are physically separated from one another, can lead to lack of ensemble in the finished recordings. New twists on old acoustical treatment techniques have been implemented at a studio in Nashville, Tennessee, which minimize the need for multiple ancillary recording rooms, thus creating an environment where talent, producer and recording professionals can all occupy the same space for maximum performance synergy. Semi-separated performance areas are designed around a central, critical listening area. The techniques and equipment required to achieve this separation are reviewed, as are advantages and disadvantages to this new control room design approach.

  12. Home advantage in southern hemisphere rugby union: national and international.

    PubMed

    Morton R, Hugh

    2006-05-01

    This study evaluates home advantages both for national (Super 12) and international (Tri-nations) rugby union teams from South Africa, Australia and New Zealand, over the five-year period 2000 - 2004 using linear modelling. These home advantages are examined for statistical and practical significance, for variability between teams, for stability over time and for inter-correlation. These data reveal that the overall home advantage in elite rugby union has a mean of +6.7 points, and that this changes little from year to year. Closer scrutiny nevertheless reveals a high degree of variability. Different teams can and do have different home advantages, which ranges from a low of -0.7 to a high of +28.3 points in any one year. Furthermore, some team home advantages change up or down from one year to the next, by as much as -36.5 to +31.4 points at the extremes. There is no evidence that the stronger teams have the higher home advantages, or that a high home advantage leads to a superior finishing position in the competition.

  13. Creating corporate advantage.

    PubMed

    Collis, D J; Montgomery, C A

    1998-01-01

    What differentiates truly great corporate strategies from the merely adequate? How can executives at the corporate level create tangible advantage for their businesses that makes the whole more than the sum of the parts? This article presents a comprehensive framework for value creation in the multibusiness company. It addresses the most fundamental questions of corporate strategy: What businesses should a company be in? How should it coordinate activities across businesses? What role should the corporate office play? How should the corporation measure and control performance? Through detailed case studies of Tyco International, Sharp, the Newell Company, and Saatchi and Saatchi, the authors demonstrate that the answers to all those questions are driven largely by the nature of a company's special resources--its assets, skills, and capabilities. These range along a continuum from the highly specialized at one end to the very general at the other. A corporation's location on the continuum constrains the set of businesses it should compete in and limits its choices about the design of its organization. Applying the framework, the authors point out the common mistakes that result from misaligned corporate strategies. Companies mistakenly enter businesses based on similarities in products rather than the resources that contribute to competitive advantage in each business. Instead of tailoring organizational structures and systems to the needs of a particular strategy, they create plain-vanilla corporate offices and infrastructures. The company examples demonstrate that one size does not fit all. One can find great corporate strategies all along the continuum.

  14. Maximum permissible voltage of YBCO coated conductors

    NASA Astrophysics Data System (ADS)

    Wen, J.; Lin, B.; Sheng, J.; Xu, J.; Jin, Z.; Hong, Z.; Wang, D.; Zhou, H.; Shen, X.; Shen, C.

    2014-06-01

    Superconducting fault current limiter (SFCL) could reduce short circuit currents in electrical power system. One of the most important thing in developing SFCL is to find out the maximum permissible voltage of each limiting element. The maximum permissible voltage is defined as the maximum voltage per unit length at which the YBCO coated conductors (CC) do not suffer from critical current (Ic) degradation or burnout. In this research, the time of quenching process is changed and voltage is raised until the Ic degradation or burnout happens. YBCO coated conductors test in the experiment are from American superconductor (AMSC) and Shanghai Jiao Tong University (SJTU). Along with the quenching duration increasing, the maximum permissible voltage of CC decreases. When quenching duration is 100 ms, the maximum permissible of SJTU CC, 12 mm AMSC CC and 4 mm AMSC CC are 0.72 V/cm, 0.52 V/cm and 1.2 V/cm respectively. Based on the results of samples, the whole length of CCs used in the design of a SFCL can be determined.

  15. 30 CFR 56.19062 - Maximum acceleration and deceleration.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum acceleration and deceleration. 56.19062 Section 56.19062 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoisting Procedures § 56.19062 Maximum acceleration and deceleration. Maximum normal operating...

  16. 30 CFR 57.19062 - Maximum acceleration and deceleration.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum acceleration and deceleration. 57.19062 Section 57.19062 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoisting Procedures § 57.19062 Maximum acceleration and deceleration. Maximum normal operating...

  17. Competitive Intelligence and Social Advantage.

    ERIC Educational Resources Information Center

    Davenport, Elisabeth; Cronin, Blaise

    1994-01-01

    Presents an overview of issues concerning civilian competitive intelligence (CI). Topics discussed include competitive advantage in academic and research environments; public domain information and libraries; covert and overt competitive intelligence; data diversity; use of the Internet; cooperative intelligence; and implications for library and…

  18. 42 CFR 457.560 - Cumulative cost-sharing maximum.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Cumulative cost-sharing maximum. 457.560 Section... State Plan Requirements: Enrollee Financial Responsibilities § 457.560 Cumulative cost-sharing maximum... writing and orally if appropriate of their individual cumulative cost-sharing maximum amount at the time...

  19. Fast and accurate estimation of the covariance between pairwise maximum likelihood distances.

    PubMed

    Gil, Manuel

    2014-01-01

    Pairwise evolutionary distances are a model-based summary statistic for a set of molecular sequences. They represent the leaf-to-leaf path lengths of the underlying phylogenetic tree. Estimates of pairwise distances with overlapping paths covary because of shared mutation events. It is desirable to take these covariance structure into account to increase precision in any process that compares or combines distances. This paper introduces a fast estimator for the covariance of two pairwise maximum likelihood distances, estimated under general Markov models. The estimator is based on a conjecture (going back to Nei & Jin, 1989) which links the covariance to path lengths. It is proven here under a simple symmetric substitution model. A simulation shows that the estimator outperforms previously published ones in terms of the mean squared error.

  20. Fast and accurate estimation of the covariance between pairwise maximum likelihood distances

    PubMed Central

    2014-01-01

    Pairwise evolutionary distances are a model-based summary statistic for a set of molecular sequences. They represent the leaf-to-leaf path lengths of the underlying phylogenetic tree. Estimates of pairwise distances with overlapping paths covary because of shared mutation events. It is desirable to take these covariance structure into account to increase precision in any process that compares or combines distances. This paper introduces a fast estimator for the covariance of two pairwise maximum likelihood distances, estimated under general Markov models. The estimator is based on a conjecture (going back to Nei & Jin, 1989) which links the covariance to path lengths. It is proven here under a simple symmetric substitution model. A simulation shows that the estimator outperforms previously published ones in terms of the mean squared error. PMID:25279263

  1. Solar maximum: Solar array degradation

    NASA Technical Reports Server (NTRS)

    Miller, T.

    1985-01-01

    The 5-year in-orbit power degradation of the silicon solar array aboard the Solar Maximum Satellite was evaluated. This was the first spacecraft to use Teflon R FEP as a coverglass adhesive, thus avoiding the necessity of an ultraviolet filter. The peak power tracking mode of the power regulator unit was employed to ensure consistent maximum power comparisons. Telemetry was normalized to account for the effects of illumination intensity, charged particle irradiation dosage, and solar array temperature. Reference conditions of 1.0 solar constant at air mass zero and 301 K (28 C) were used as a basis for normalization. Beginning-of-life array power was 2230 watts. Currently, the array output is 1830 watts. This corresponds to a 16 percent loss in array performance over 5 years. Comparison of Solar Maximum Telemetry and predicted power levels indicate that array output is 2 percent less than predictions based on an annual 1.0 MeV equivalent election fluence of 2.34 x ten to the 13th power square centimeters space environment.

  2. A visual short-term memory advantage for objects of expertise

    PubMed Central

    Curby, Kim M.; Glazek, Kuba; Gauthier, Isabel

    2014-01-01

    Visual short-term memory (VSTM) is limited, especially for complex objects. Its capacity, however, is greater for faces than for other objects, an advantage that may stem from the holistic nature of face processing. If the holistic processing explains this advantage, then object expertise—which also relies on holistic processing—should endow experts with a VSTM advantage. We compared VSTM for cars among car experts to that among car novices. Car experts, but not car novices, demonstrated a VSTM advantage similar to that for faces; this advantage was orientation-specific and was correlated with an individual's level of car expertise. Control experiments ruled out accounts based solely on verbal- or long-term memory representations. These findings suggest that the processing advantages afforded by visual expertise result in domain-specific increases in VSTM capacity, perhaps by allowing experts to maximize the use of an inherently limited VSTM system. PMID:19170473

  3. Taking Care of Your Diabetes Means Taking Care of Your Heart (Tip Sheet)

    MedlinePlus

    ... Diabetes Means Taking Care of Your Heart Taking Care of Your Diabetes Means Taking Care of Your Heart Diabetes and Heart Disease For ... What you can do now Ask your health care team these questions: What can I do to ...

  4. A Kantian argument against comparatively advantageous genetic modification.

    PubMed

    Jensen, David

    2011-08-01

    The genetic modification of children is becoming a more likely possibility given our rapid progress in medical technologies. I argue, from a broadly Kantian point of view, that at least one kind of such modification-modification by a parent for the sake of a child's comparative advantage-is not rationally justified. To argue this, I first characterize a necessary condition on reasons and rational justification: what is a reason for an agent to do an action in one set of circumstances must be a reason for any in those circumstances to do the action. I then show that comparatively advantageous genetic modification violates this principle since a child's "getting ahead" through genetic modification cannot be rationally justified unless other children also could receive the modification, thus rendering the advantage useless. Finally, I consider the major objection to this it seems to disallow all cases of a parent's helping a child get ahead, something that parents normally engage in with their children. I argue that typical practices of developing a comparative advantage in a child, as well as practices of societal competition in general, do not conflict because they involve circumstances that mitigate the universal character of reasons. Many ordinary cases of competitive advantage that we think of as unjust, in fact, can be explained by my argument.

  5. 36 CFR 20.3 - Maximum number of permittees.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Maximum number of permittees... INTERIOR ISLE ROYALE NATIONAL PARK; COMMERCIAL FISHING § 20.3 Maximum number of permittees. Commercial fishermen to whom the annual revocable permits may be granted shall not exceed the maximum number of persons...

  6. 44 CFR 208.12 - Maximum Pay Rate Table.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Maximum Pay Rate Table. 208... § 208.12 Maximum Pay Rate Table. (a) Purpose. This section establishes the process for creating and updating the Maximum Pay Rate Table (Table), and the Table's use to reimburse Affiliated Personnel (Task...

  7. 13 CFR 107.840 - Maximum term of Financing.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Maximum term of Financing. 107.840... COMPANIES Financing of Small Businesses by Licensees Structuring Licensee's Financing of An Eligible Small Business: Terms and Conditions of Financing § 107.840 Maximum term of Financing. The maximum term of any...

  8. Polysemy Advantage with Abstract but Not Concrete Words

    ERIC Educational Resources Information Center

    Jager, Bernadet; Cleland, Alexandra A.

    2016-01-01

    It is a robust finding that ambiguous words are recognized faster than unambiguous words. More recent studies (e.g., Rodd et al. in "J Mem Lang" 46:245-266, 2002) now indicate that this "ambiguity advantage" may in reality be a "polysemy advantage": caused by related senses (polysemy) rather than unrelated meanings…

  9. Fishing and bottom water temperature as drivers of change in maximum shell length in Atlantic surfclams (Spisula solidissima)

    NASA Astrophysics Data System (ADS)

    Munroe, D. M.; Narváez, D. A.; Hennen, D.; Jacobson, L.; Mann, R.; Hofmann, E. E.; Powell, E. N.; Klinck, J. M.

    2016-03-01

    Maximum shell length of Atlantic surfclams (Spisula solidissima) on the Middle Atlantic Bight (MAB) continental shelf, obtained from federal fishery survey data from 1982-present, has decreased by 15-20 mm. Two potential causes of this decreasing trend, fishery removal of large animals and stress due to warming bottom temperatures, were investigated using an individual-based model for post-settlement surfclams and a fifty-year hindcast of bottom water temperatures on the MAB. Simulations showed that fishing and/or warming bottom water temperature can cause decreases in maximum surfclam shell length (body size) equivalent to those observed in the fished stock. Independently, either localized fishing rates of 20% or sustained bottom temperatures that are 2 °C warmer than average conditions generate the observed decrease in maximum shell length. However, these independent conditions represent extremes and are not sustained in the MAB. The combined effects of fishing and warmer temperatures can generate simulated length decreases that are similar to observed decreases. Interannual variability in bottom water temperatures can also generate fluctuations in simulated shell length of up to 20 mm over a period of 10-15 years. If the change in maximum size is not genotypic, simulations also suggest that shell size composition of surfclam populations can recover if conditions change; however, that recovery could take a decade to become evident.

  10. Effectiveness of Resistance Circuit-Based Training for Maximum Oxygen Uptake and Upper-Body One-Repetition Maximum Improvements: A Systematic Review and Meta-Analysis.

    PubMed

    Muñoz-Martínez, Francisco Antonio; Rubio-Arias, Jacobo Á; Ramos-Campo, Domingo Jesús; Alcaraz, Pedro E

    2017-12-01

    It is well known that concurrent increases in both maximal strength and aerobic capacity are associated with improvements in sports performance as well as overall health. One of the most popular training methods used for achieving these objectives is resistance circuit-based training. The objective of the present systematic review with a meta-analysis was to evaluate published studies that have investigated the effects of resistance circuit-based training on maximum oxygen uptake and one-repetition maximum of the upper-body strength (bench press exercise) in healthy adults. The following electronic databases were searched from January to June 2016: PubMed, Web of Science and Cochrane. Studies were included if they met the following criteria: (1) examined healthy adults aged between 18 and 65 years; (2) met the characteristics of resistance circuit-based training; and (3) analysed the outcome variables of maximum oxygen uptake using a gas analyser and/or one-repetition maximum bench press. Of the 100 articles found from the database search and after all duplicates were removed, eight articles were analysed for maximum oxygen uptake. Of 118 healthy adults who performed resistance circuit-based training, maximum oxygen uptake was evaluated before and after the training programme. Additionally, from the 308 articles found for one-repetition maximum, eight articles were analysed. The bench press one-repetition maximum load, of 237 healthy adults who performed resistance circuit-based training, was evaluated before and after the training programme. Significant increases in maximum oxygen uptake and one-repetition maximum bench press were observed following resistance circuit-based training. Additionally, significant differences in maximum oxygen uptake and one-repetition maximum bench press were found between the resistance circuit-based training and control groups. The meta-analysis showed that resistance circuit-based training, independent of the protocol used in the

  11. 20 CFR 226.52 - Total annuity subject to maximum.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Total annuity subject to maximum. 226.52... COMPUTING EMPLOYEE, SPOUSE, AND DIVORCED SPOUSE ANNUITIES Railroad Retirement Family Maximum § 226.52 Total annuity subject to maximum. The total annuity amount which is compared to the maximum monthly amount to...

  12. 40 CFR 35.2205 - Maximum allowable project cost.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum allowable project cost. 35.2205... ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works § 35.2205 Maximum allowable... regulation, the maximum allowable project cost will be the sum of: (1) The allowable cost of the following...

  13. Kinematics and Kinetics of Maximum Running Speed in Youth Across Maturity.

    PubMed

    Rumpf, Michael C; Cronin, John B; Oliver, Jonathan; Hughes, Michael

    2015-05-01

    Sprinting is an important physical capacity and the development of sprint ability can take place throughout the athlete's growth. The purpose of this study therefore was to determine if the kinematics and kinetics associated with maximum sprint velocity differs in male youth participants of different maturity status (pre, mid- and postpeak height velocity (PHV)) and if maximum sprint velocity is determined by age, maturity or individual body size measurement. Participants (n = 74) sprinted over 30 meters on a nonmotorized treadmill and the fastest four consecutive steps were analyzed. Pre-PHV participants were found to differ significantly (p < .05) to mid- and post-PHV participants in speed, step length, step frequency, vertical and horizontal force, and horizontal power (~8-78%). However, only relative vertical force and speed differed significantly between mid and post-PHV groups. The greatest average percent change in kinetics and kinematics was observed from pre- to mid-PHV (37.8%) compared with mid- to post- PHV groups (11.6%). When maturity offset was entered as a covariate, there was no significant difference in velocity between the three groups. However, all groups were significantly different from each other when age was chosen as the covariate. The two best predictors of maximal velocity within each maturity group were power and horizontal force (R2 = 97-99%) indicating the importance of horizontal force application while sprinting. Finally, maturity explained 83% of maximal velocity across all groups.

  14. Energy Advantages for Green Schools

    ERIC Educational Resources Information Center

    Griffin, J. Tim

    2012-01-01

    Because of many advantages associated with central utility systems, school campuses, from large universities to elementary schools, have used district energy for decades. District energy facilities enable thermal and electric utilities to be generated with greater efficiency and higher system reliability, while requiring fewer maintenance and…

  15. Did Babe Ruth Have a Comparative Advantage as a Pitcher?

    ERIC Educational Resources Information Center

    Scahill, Edward M.

    1990-01-01

    Advocates using baseball statistics to illustrate the advantages of specialization in production. Using Babe Ruth's record as an analogy, suggests a methodology for determining a player's comparative advantage as a teaching illustration. Includes the team's statistical profile in five tables to explain comparative advantage and profit maximizing.…

  16. Back to Basics: A Bilingual Advantage in Infant Visual Habituation

    ERIC Educational Resources Information Center

    Singh, Leher; Fu, Charlene S. L.; Rahman, Aishah A.; Hameed, Waseem B.; Sanmugam, Shamini; Agarwal, Pratibha; Jiang, Binyan; Chong, Yap Seng; Meaney, Michael J.; Rifkin-Graboi, Anne

    2015-01-01

    Comparisons of cognitive processing in monolinguals and bilinguals have revealed a bilingual advantage in inhibitory control. Recent studies have demonstrated advantages associated with exposure to two languages in infancy. However, the domain specificity and scope of the infant bilingual advantage in infancy remains unclear. In the present study,…

  17. Competitive Advantage and its Sources in an Evolving Market

    NASA Astrophysics Data System (ADS)

    Zaridis, Apostolos D.

    2009-08-01

    In a continuously altered and evolving Market, as is the food manufacturing market, the main and long-lasting objective of firm that is the maximization of its wealth and consequently the continuous remaining in profit regions, appears that it is possible to be achieved via the obtainment and maintenance of diachronically long-term competitive advantage, which it will render the firm unique or leader force in a inexorable competition that is continuously extended in a globalized market. Various definitions and different regards are developed in regard to the competitive advantage and the way with which a firm it is possible, acquiring it, to star in the market in which it is activated. As result of sustainable competitive advantage in a firm comes the above the average performance. Abundance of resources and competences that are proposed as sources of competitive advantage in the resource-based view literature exists, while they are added continuously new based on empiric studies. In any case, it appears to suffer hierarchy of sources of competitive advantage, with regard to sustainability of these.

  18. Explaining Asian Americans' academic advantage over whites.

    PubMed

    Hsin, Amy; Xie, Yu

    2014-06-10

    The superior academic achievement of Asian Americans is a well-documented phenomenon that lacks a widely accepted explanation. Asian Americans' advantage in this respect has been attributed to three groups of factors: (i) socio-demographic characteristics, (ii) cognitive ability, and (iii) academic effort as measured by characteristics such as attentiveness and work ethic. We combine data from two nationally representative cohort longitudinal surveys to compare Asian-American and white students in their educational trajectories from kindergarten through high school. We find that the Asian-American educational advantage is attributable mainly to Asian students exerting greater academic effort and not to advantages in tested cognitive abilities or socio-demographics. We test explanations for the Asian-white gap in academic effort and find that the gap can be further attributed to (i) cultural differences in beliefs regarding the connection between effort and achievement and (ii) immigration status. Finally, we highlight the potential psychological and social costs associated with Asian-American achievement success.

  19. Explaining Asian Americans’ academic advantage over whites

    PubMed Central

    Hsin, Amy; Xie, Yu

    2014-01-01

    The superior academic achievement of Asian Americans is a well-documented phenomenon that lacks a widely accepted explanation. Asian Americans’ advantage in this respect has been attributed to three groups of factors: (i) socio-demographic characteristics, (ii) cognitive ability, and (iii) academic effort as measured by characteristics such as attentiveness and work ethic. We combine data from two nationally representative cohort longitudinal surveys to compare Asian-American and white students in their educational trajectories from kindergarten through high school. We find that the Asian-American educational advantage is attributable mainly to Asian students exerting greater academic effort and not to advantages in tested cognitive abilities or socio-demographics. We test explanations for the Asian–white gap in academic effort and find that the gap can be further attributed to (i) cultural differences in beliefs regarding the connection between effort and achievement and (ii) immigration status. Finally, we highlight the potential psychological and social costs associated with Asian-American achievement success. PMID:24799702

  20. 49 CFR 236.55 - Dead section; maximum length.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Dead section; maximum length. 236.55 Section 236... Instructions: All Systems Track Circuits § 236.55 Dead section; maximum length. Where dead section exceeds 35... over such dead section is less than 35 feet, the maximum length of the dead section shall not exceed...

  1. 49 CFR 236.55 - Dead section; maximum length.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Dead section; maximum length. 236.55 Section 236... Instructions: All Systems Track Circuits § 236.55 Dead section; maximum length. Where dead section exceeds 35... over such dead section is less than 35 feet, the maximum length of the dead section shall not exceed...

  2. 49 CFR 236.55 - Dead section; maximum length.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Dead section; maximum length. 236.55 Section 236... Instructions: All Systems Track Circuits § 236.55 Dead section; maximum length. Where dead section exceeds 35... over such dead section is less than 35 feet, the maximum length of the dead section shall not exceed...

  3. 49 CFR 236.55 - Dead section; maximum length.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Dead section; maximum length. 236.55 Section 236... Instructions: All Systems Track Circuits § 236.55 Dead section; maximum length. Where dead section exceeds 35... over such dead section is less than 35 feet, the maximum length of the dead section shall not exceed...

  4. 49 CFR 236.55 - Dead section; maximum length.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Dead section; maximum length. 236.55 Section 236... Instructions: All Systems Track Circuits § 236.55 Dead section; maximum length. Where dead section exceeds 35... over such dead section is less than 35 feet, the maximum length of the dead section shall not exceed...

  5. 14 CFR 25.1505 - Maximum operating limit speed.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Maximum operating limit speed. 25.1505... Operating Limitations § 25.1505 Maximum operating limit speed. The maximum operating limit speed (V MO/M MO airspeed or Mach Number, whichever is critical at a particular altitude) is a speed that may not be...

  6. 14 CFR 25.1505 - Maximum operating limit speed.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Maximum operating limit speed. 25.1505... Operating Limitations § 25.1505 Maximum operating limit speed. The maximum operating limit speed (V MO/M MO airspeed or Mach Number, whichever is critical at a particular altitude) is a speed that may not be...

  7. Advantages of statistical analysis of giant vesicle flickering for bending elasticity measurements.

    PubMed

    Méléard, P; Pott, T; Bouvrais, H; Ipsen, J H

    2011-10-01

    We show how to greatly improve precision when determining bending elasticity of giant unilamellar vesicles. Taking advantage of the well-known quasi-spherical model of liposome flickering, we analyze the full probability distributions of the configurational fluctuations instead of limiting the analysis to the second moment measurements only as usually done in previously published works. This leads to objective criteria to reject vesicles that do not behave according to the model. As a result, the confidence in the bending elasticity determination of individual vesicles that fit the model is improved and, consequently, the reproducibility of this measurement for a given membrane system. This approach uncovers new possibilities for bending elasticity studies like detection of minute influences by solutes in the buffer or into the membrane. In the same way, we are now able to detect the inhomogeneous behavior of giant vesicle systems such as the hazardous production of peroxide in bilayers containing fluorescent dyes. © EDP Sciences / Società Italiana di Fisica / Springer-Verlag 2011

  8. Commit to Building on New England's "Employability" Advantage!

    ERIC Educational Resources Information Center

    Gittell, Ross

    2017-01-01

    Higher education has provided New England with an economic advantage, as the region without strong natural resource advantages has relied on its higher education institutions (HEIs) and brainpower. A higher education-based economic advantage has enabled the region to develop strong well-paying technology and knowledge-based industries tied to New…

  9. Maximum Entropy, Word-Frequency, Chinese Characters, and Multiple Meanings

    PubMed Central

    Yan, Xiaoyong; Minnhagen, Petter

    2015-01-01

    The word-frequency distribution of a text written by an author is well accounted for by a maximum entropy distribution, the RGF (random group formation)-prediction. The RGF-distribution is completely determined by the a priori values of the total number of words in the text (M), the number of distinct words (N) and the number of repetitions of the most common word (kmax). It is here shown that this maximum entropy prediction also describes a text written in Chinese characters. In particular it is shown that although the same Chinese text written in words and Chinese characters have quite differently shaped distributions, they are nevertheless both well predicted by their respective three a priori characteristic values. It is pointed out that this is analogous to the change in the shape of the distribution when translating a given text to another language. Another consequence of the RGF-prediction is that taking a part of a long text will change the input parameters (M, N, kmax) and consequently also the shape of the frequency distribution. This is explicitly confirmed for texts written in Chinese characters. Since the RGF-prediction has no system-specific information beyond the three a priori values (M, N, kmax), any specific language characteristic has to be sought in systematic deviations from the RGF-prediction and the measured frequencies. One such systematic deviation is identified and, through a statistical information theoretical argument and an extended RGF-model, it is proposed that this deviation is caused by multiple meanings of Chinese characters. The effect is stronger for Chinese characters than for Chinese words. The relation between Zipf’s law, the Simon-model for texts and the present results are discussed. PMID:25955175

  10. The advantages and barriers in the implementation of a substance dependence treatment information system (SDTIS).

    PubMed

    Ajami, Sima; Mellat-Karkevandi, Zahra

    2015-11-01

    Addiction is a phenomenon that causes structural changes in different systems of society. Studies show for planning of addiction prevention and treatment, it is necessary to create an information management system. Substance dependence information systems refer to systems which collect, analyse and report data related to substance dependence information. The aim of this study was to identify advantages and barriers to implement Substance Dependence Treatment Information System (SDTIS). This study was a narrative review. Our review divided into three phases: literature collection, assessing, and selection. We employed the following keywords and their combinations in different areas of articles. In this study, 22 of collected articles and reports were selected based on their relevancy. We found many advantages for a substance dependence treatment information system such as recording sufficient, complete and accurate information and easy and timely access to them and monitoring and enhancing the quality of care received by patients. But we may face some concerns for implementing this information system like taking time and funds from client services, being expensive or even problems regarding the quality of data contained in these information systems. There are some important problems in the way of implementing. In order to overcome these issues, we need to raise community awareness.

  11. The advantages and barriers in the implementation of a substance dependence treatment information system (SDTIS)

    PubMed Central

    Ajami, Sima; Mellat-Karkevandi, Zahra

    2015-01-01

    Addiction is a phenomenon that causes structural changes in different systems of society. Studies show for planning of addiction prevention and treatment, it is necessary to create an information management system. Substance dependence information systems refer to systems which collect, analyse and report data related to substance dependence information. The aim of this study was to identify advantages and barriers to implement Substance Dependence Treatment Information System (SDTIS). This study was a narrative review. Our review divided into three phases: literature collection, assessing, and selection. We employed the following keywords and their combinations in different areas of articles. In this study, 22 of collected articles and reports were selected based on their relevancy. We found many advantages for a substance dependence treatment information system such as recording sufficient, complete and accurate information and easy and timely access to them and monitoring and enhancing the quality of care received by patients. But we may face some concerns for implementing this information system like taking time and funds from client services, being expensive or even problems regarding the quality of data contained in these information systems. There are some important problems in the way of implementing. In order to overcome these issues, we need to raise community awareness. PMID:26941816

  12. 40 CFR 94.107 - Determination of maximum test speed.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Determination of maximum test speed... Determination of maximum test speed. (a) Overview. This section specifies how to determine maximum test speed from a lug curve. This maximum test speed is used in §§ 94.105, 94.106, and § 94.109 (including the...

  13. 40 CFR 94.107 - Determination of maximum test speed.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 20 2011-07-01 2011-07-01 false Determination of maximum test speed... Determination of maximum test speed. (a) Overview. This section specifies how to determine maximum test speed from a lug curve. This maximum test speed is used in §§ 94.105, 94.106, and § 94.109 (including the...

  14. An Experimental Investigation of the Process of Isotope Exchange that Takes Place when Heavy Water Is Exposed to the Atmosphere

    ERIC Educational Resources Information Center

    Deeney, F. A.; O'Leary, J. P.

    2009-01-01

    We have used the recently developed method for rapid measurement of maximum density temperature to determine the rate at which hydrogen and deuterium isotope exchange takes place when a sample of heavy water is exposed to the atmosphere. We also provide a simple explanation for the observed linear rate of transition. (Contains 2 figures.)

  15. Competitive advantage on a warming planet.

    PubMed

    Lash, Jonathan; Wellington, Fred

    2007-03-01

    Whether you're in a traditional smokestack industry or a "clean" business like investment banking, your company will increasingly feel the effects of climate change. Even people skeptical about global warming's dangers are recognizing that, simply because so many others are concerned, the phenomenon has wide-ranging implications. Investors already are discounting share prices of companies poorly positioned to compete in a warming world. Many businesses face higher raw material and energy costs as more and more governments enact policies placing a cost on emissions. Consumers are taking into account a company's environmental record when making purchasing decisions. There's also a burgeoning market in greenhouse gas emission allowances (the carbon market), with annual trading in these assets valued at tens of billions of dollars. Companies that manage and mitigate their exposure to the risks associated with climate change while seeking new opportunities for profit will generate a competitive advantage over rivals in a carbon-constrained future. This article offers a systematic approach to mapping and responding to climate change risks. According to Jonathan Lash and Fred Wellington of the World Resources Institute, an environmental think tank, the risks can be divided into six categories: regulatory (policies such as new emissions standards), products and technology (the development and marketing of climate-friendly products and services), litigation (lawsuits alleging environmental harm), reputational (how a company's environmental policies affect its brand), supply chain (potentially higher raw material and energy costs), and physical (such as an increase in the incidence of hurricanes). The authors propose a four-step process for responding to climate change risk: Quantify your company's carbon footprint; identify the risks and opportunities you face; adapt your business in response; and do it better than your competitors.

  16. Advantage of resonant power conversion in aerospace applications

    NASA Technical Reports Server (NTRS)

    Hansen, I. G.

    1983-01-01

    An ultrasonic, sinusoidal aerospace power distribution system is shown to have many advantages over other candidate power systems. These advantages include light weight, ease of fault clearing, versatility in handling many loads including motors, and the capability of production within the limits of present technology. References are cited that demonstrate the state of resonant converter technology and support these conclusions.

  17. Benefits of a programme taking advantage of patient-instructors to teach and assess musculoskeletal skills in medical students.

    PubMed

    Bideau, M; Guerne, P-A; Bianchi, M-P; Huber, P

    2006-12-01

    To evaluate a rheumatoid arthritis patient-instructor-based formation-assessment programme for its ability to improve and assess musculoskeletal knowledge and skills in third-year medical students. (1) The quality of our musculoskeletal teaching was assessed before patient-instructor intervention through an open-questions test (pre-test) and performance record forms (PRFs) filled in by the patient-instructors. (2) The improvement afforded by patient-instructors was evaluated through a second (identical) open-questions test (post-test). (3) The resulting skills in the students were further assessed by an individual patient-instructors physical status record form (PSRF), filled in by the students. Pre-tests and post-tests showed an improvement in correct answers from a mean score of 39% to 47%. The history-taking questions that obtained <50% scores in the pre-test mostly dealt with the consequences of a chronic illness. Intervention of patient-instructors especially improved knowledge of the psychosocial aspects and side effects of drugs. With regard to physical examination, patient-instructors makedly improved the identification of assessment of signs of active and chronic inflammation. PRF analysis showed that 10 of 28 questions answered by <50% of the students were related to disease characteristics of rheumatoid arthritis, extra-articular signs, side effects of drugs and psychosocial aspects. Analysis of the PSRF indicated that the weakness of our students' physical examination abilities in particular is related to recognising the types of swelling and differentiating tenderness from pain on motion. This study proves the considerable benefits of the involvement of patient-instructors in the teaching and assessment of clinical skills in students.

  18. Evolving user needs and late-mover advantage

    PubMed Central

    Querbes, Adrien; Frenken, Koen

    2016-01-01

    We propose a generalized NK-model of late-mover advantage where late-mover firms leapfrog first-mover firms as user needs evolve over time. First movers face severe trade-offs between the provision of functionalities in which their products already excel and the additional functionalities requested by users later on. Late movers, by contrast, start searching when more functionalities are already known and typically come up with superior product designs. We also show that late-mover advantage is more probable for more complex technologies. Managerial implications follow. PMID:28596705

  19. Maximum spectral demands in the near-fault region

    USGS Publications Warehouse

    Huang, Yin-Nan; Whittaker, Andrew S.; Luco, Nicolas

    2008-01-01

    The Next Generation Attenuation (NGA) relationships for shallow crustal earthquakes in the western United States predict a rotated geometric mean of horizontal spectral demand, termed GMRotI50, and not maximum spectral demand. Differences between strike-normal, strike-parallel, geometric-mean, and maximum spectral demands in the near-fault region are investigated using 147 pairs of records selected from the NGA strong motion database. The selected records are for earthquakes with moment magnitude greater than 6.5 and for closest site-to-fault distance less than 15 km. Ratios of maximum spectral demand to NGA-predicted GMRotI50 for each pair of ground motions are presented. The ratio shows a clear dependence on period and the Somerville directivity parameters. Maximum demands can substantially exceed NGA-predicted GMRotI50 demands in the near-fault region, which has significant implications for seismic design, seismic performance assessment, and the next-generation seismic design maps. Strike-normal spectral demands are a significantly unconservative surrogate for maximum spectral demands for closest distance greater than 3 to 5 km. Scale factors that transform NGA-predicted GMRotI50 to a maximum spectral demand in the near-fault region are proposed.

  20. Plant circadian clocks increase photosynthesis, growth, survival, and competitive advantage.

    PubMed

    Dodd, Antony N; Salathia, Neeraj; Hall, Anthony; Kévei, Eva; Tóth, Réka; Nagy, Ferenc; Hibberd, Julian M; Millar, Andrew J; Webb, Alex A R

    2005-07-22

    Circadian clocks are believed to confer an advantage to plants, but the nature of that advantage has been unknown. We show that a substantial photosynthetic advantage is conferred by correct matching of the circadian clock period with that of the external light-dark cycle. In wild type and in long- and short-circadian period mutants of Arabidopsis thaliana, plants with a clock period matched to the environment contain more chlorophyll, fix more carbon, grow faster, and survive better than plants with circadian periods differing from their environment. This explains why plants gain advantage from circadian control.

  1. Always Gamble on an Empty Stomach: Hunger Is Associated with Advantageous Decision Making

    PubMed Central

    de Ridder, Denise; Kroese, Floor; Adriaanse, Marieke; Evers, Catharine

    2014-01-01

    Three experimental studies examined the counterintuitive hypothesis that hunger improves strategic decision making, arguing that people in a hot state are better able to make favorable decisions involving uncertain outcomes. Studies 1 and 2 demonstrated that participants with more hunger or greater appetite made more advantageous choices in the Iowa Gambling Task compared to sated participants or participants with a smaller appetite. Study 3 revealed that hungry participants were better able to appreciate future big rewards in a delay discounting task; and that, in spite of their perception of increased rewarding value of both food and monetary objects, hungry participants were not more inclined to take risks to get the object of their desire. Together, these studies for the first time provide evidence that hot states improve decision making under uncertain conditions, challenging the conventional conception of the detrimental role of impulsivity in decision making. PMID:25340399

  2. Always gamble on an empty stomach: hunger is associated with advantageous decision making.

    PubMed

    de Ridder, Denise; Kroese, Floor; Adriaanse, Marieke; Evers, Catharine

    2014-01-01

    Three experimental studies examined the counterintuitive hypothesis that hunger improves strategic decision making, arguing that people in a hot state are better able to make favorable decisions involving uncertain outcomes. Studies 1 and 2 demonstrated that participants with more hunger or greater appetite made more advantageous choices in the Iowa Gambling Task compared to sated participants or participants with a smaller appetite. Study 3 revealed that hungry participants were better able to appreciate future big rewards in a delay discounting task; and that, in spite of their perception of increased rewarding value of both food and monetary objects, hungry participants were not more inclined to take risks to get the object of their desire. Together, these studies for the first time provide evidence that hot states improve decision making under uncertain conditions, challenging the conventional conception of the detrimental role of impulsivity in decision making.

  3. Maximum entropy perception-action space: a Bayesian model of eye movement selection

    NASA Astrophysics Data System (ADS)

    Colas, Francis; Bessière, Pierre; Girard, Benoît

    2011-03-01

    In this article, we investigate the issue of the selection of eye movements in a free-eye Multiple Object Tracking task. We propose a Bayesian model of retinotopic maps with a complex logarithmic mapping. This model is structured in two parts: a representation of the visual scene, and a decision model based on the representation. We compare different decision models based on different features of the representation and we show that taking into account uncertainty helps predict the eye movements of subjects recorded in a psychophysics experiment. Finally, based on experimental data, we postulate that the complex logarithmic mapping has a functional relevance, as the density of objects in this space in more uniform than expected. This may indicate that the representation space and control strategies are such that the object density is of maximum entropy.

  4. 24 CFR 203.474 - Maximum claim period.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Maximum claim period. 203.474 Section 203.474 Housing and Urban Development Regulations Relating to Housing and Urban Development... SINGLE FAMILY MORTGAGE INSURANCE Contract Rights and Obligations Rehabilitation Loans § 203.474 Maximum...

  5. 40 CFR 35.265 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.265 Section 35.265 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE....265 Maximum federal share. The Regional Administrator may provide up to 60 percent of the approved...

  6. 33 CFR 401.3 - Maximum vessel dimensions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Maximum vessel dimensions. 401.3 Section 401.3 Navigation and Navigable Waters SAINT LAWRENCE SEAWAY DEVELOPMENT CORPORATION, DEPARTMENT OF TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Condition of Vessels § 401.3 Maximum vessel dimensions...

  7. 24 CFR 220.820 - Maximum claim period.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Maximum claim period. 220.820 Section 220.820 Housing and Urban Development Regulations Relating to Housing and Urban Development... Contract Rights and Obligations-Projects Insured Project Improvement Loans § 220.820 Maximum claim period...

  8. 40 CFR 35.705 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.705 Section 35.705 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE...) § 35.705 Maximum federal share. The Regional Administrator may provide Tribes and Intertribal Consortia...

  9. 40 CFR 35.295 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.295 Section 35.295 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE... Maximum federal share. The Regional Administrator may provide State agencies up to 50 percent of the...

  10. Coalescent-based species tree inference from gene tree topologies under incomplete lineage sorting by maximum likelihood.

    PubMed

    Wu, Yufeng

    2012-03-01

    Incomplete lineage sorting can cause incongruence between the phylogenetic history of genes (the gene tree) and that of the species (the species tree), which can complicate the inference of phylogenies. In this article, I present a new coalescent-based algorithm for species tree inference with maximum likelihood. I first describe an improved method for computing the probability of a gene tree topology given a species tree, which is much faster than an existing algorithm by Degnan and Salter (2005). Based on this method, I develop a practical algorithm that takes a set of gene tree topologies and infers species trees with maximum likelihood. This algorithm searches for the best species tree by starting from initial species trees and performing heuristic search to obtain better trees with higher likelihood. This algorithm, called STELLS (which stands for Species Tree InfErence with Likelihood for Lineage Sorting), has been implemented in a program that is downloadable from the author's web page. The simulation results show that the STELLS algorithm is more accurate than an existing maximum likelihood method for many datasets, especially when there is noise in gene trees. I also show that the STELLS algorithm is efficient and can be applied to real biological datasets. © 2011 The Author. Evolution© 2011 The Society for the Study of Evolution.

  11. An Experiment in Comparative Advantage.

    ERIC Educational Resources Information Center

    Haupert, Michael J.

    1996-01-01

    Describes an undergraduate economics course experiment designed to teach the concepts of comparative advantage and opportunity costs. Students have a limited number of labor hours and can chose to produce either wheat or steel. As the project progresses, the students trade commodities in an attempt to maximize use of their labor hours. (MJP)

  12. 76 FR 73600 - Taking and Importing Marine Mammals; Taking Marine Mammals Incidental to Missile Launch...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-29

    ... years if NMFS finds, after notification and opportunity for public comment, that the taking will have a... taking. Regulations governing the taking of northern elephant seals (Mirounga angustirostris), Pacific... a period not to exceed 1 year, take of pinnipeds, by harassment, incidental to missile launch...

  13. Selection of the Maximum Spatial Cluster Size of the Spatial Scan Statistic by Using the Maximum Clustering Set-Proportion Statistic.

    PubMed

    Ma, Yue; Yin, Fei; Zhang, Tao; Zhou, Xiaohua Andrew; Li, Xiaosong

    2016-01-01

    Spatial scan statistics are widely used in various fields. The performance of these statistics is influenced by parameters, such as maximum spatial cluster size, and can be improved by parameter selection using performance measures. Current performance measures are based on the presence of clusters and are thus inapplicable to data sets without known clusters. In this work, we propose a novel overall performance measure called maximum clustering set-proportion (MCS-P), which is based on the likelihood of the union of detected clusters and the applied dataset. MCS-P was compared with existing performance measures in a simulation study to select the maximum spatial cluster size. Results of other performance measures, such as sensitivity and misclassification, suggest that the spatial scan statistic achieves accurate results in most scenarios with the maximum spatial cluster sizes selected using MCS-P. Given that previously known clusters are not required in the proposed strategy, selection of the optimal maximum cluster size with MCS-P can improve the performance of the scan statistic in applications without identified clusters.

  14. Selection of the Maximum Spatial Cluster Size of the Spatial Scan Statistic by Using the Maximum Clustering Set-Proportion Statistic

    PubMed Central

    Ma, Yue; Yin, Fei; Zhang, Tao; Zhou, Xiaohua Andrew; Li, Xiaosong

    2016-01-01

    Spatial scan statistics are widely used in various fields. The performance of these statistics is influenced by parameters, such as maximum spatial cluster size, and can be improved by parameter selection using performance measures. Current performance measures are based on the presence of clusters and are thus inapplicable to data sets without known clusters. In this work, we propose a novel overall performance measure called maximum clustering set–proportion (MCS-P), which is based on the likelihood of the union of detected clusters and the applied dataset. MCS-P was compared with existing performance measures in a simulation study to select the maximum spatial cluster size. Results of other performance measures, such as sensitivity and misclassification, suggest that the spatial scan statistic achieves accurate results in most scenarios with the maximum spatial cluster sizes selected using MCS-P. Given that previously known clusters are not required in the proposed strategy, selection of the optimal maximum cluster size with MCS-P can improve the performance of the scan statistic in applications without identified clusters. PMID:26820646

  15. Cryptic Fitness Advantage: Diploids Invade Haploid Populations Despite Lacking Any Apparent Advantage as Measured by Standard Fitness Assays

    PubMed Central

    Gerstein, Aleeza C.; Otto, Sarah P.

    2011-01-01

    Ploidy varies tremendously within and between species, yet the factors that influence when or why ploidy variants are adaptive remains poorly understood. Our previous work found that diploid individuals repeatedly arose within ten replicate haploid populations of Saccharomyces cerevisiae, and in each case we witnessed diploid takeover within 1800 asexual generations of batch culture evolution in the lab. The character that allowed diploids to rise in frequency within haploid populations remains unknown. Here we present a number of experiments conducted with the goal to determine what this trait (or traits) might have been. Experiments were conducted both by sampling a small number of colonies from the stocks frozen every two weeks (93 generations) during the original experiment, as well through sampling a larger number of colonies at the two time points where polymorphism for ploidy was most prevalent. Surprisingly, none of our fitness component measures (lag phase, growth rate, biomass production) indicated an advantage to diploidy. Similarly, competition assays against a common competitor and direct competition between haploid and diploid colonies isolated from the same time point failed to indicate a diploid advantage. Furthermore, we uncovered a tremendous amount of trait variation among colonies of the same ploidy level. Only late-appearing diploids showed a competitive advantage over haploids, indicating that the fitness advantage that allowed eventual takeover was not diploidy per se but an attribute of a subset of diploid lineages. Nevertheless, the initial rise in diploids to intermediate frequency cannot be explained by any of the fitness measures used; we suggest that the resolution to this mystery is negative frequency-dependent selection, which is ignored in the standard fitness measures used. PMID:22174734

  16. ATLAS DataFlow Infrastructure: Recent results from ATLAS cosmic and first-beam data-taking

    NASA Astrophysics Data System (ADS)

    Vandelli, Wainer; ATLAS TDAQ Collaboration

    2010-04-01

    The ATLAS DataFlow infrastructure is responsible for the collection and conveyance of event data from the detector front-end electronics to the mass storage. Several optimized and multi-threaded applications fulfill this purpose operating over a multi-stage Gigabit Ethernet network which is the backbone of the ATLAS Trigger and Data Acquisition System. The system must be able to efficiently transport event-data with high reliability, while providing aggregated bandwidths larger than 5 GByte/s and coping with many thousands network connections. Nevertheless, routing and streaming capabilities and monitoring and data accounting functionalities are also fundamental requirements. During 2008, a few months of ATLAS cosmic data-taking and the first experience with the LHC beams provided an unprecedented test-bed for the evaluation of the performance of the ATLAS DataFlow, in terms of functionality, robustness and stability. Besides, operating the system far from its design specifications helped in exercising its flexibility and contributed in understanding its limitations. Moreover, the integration with the detector and the interfacing with the off-line data processing and management have been able to take advantage of this extended data taking-period as well. In this paper we report on the usage of the DataFlow infrastructure during the ATLAS data-taking. These results, backed-up by complementary performance tests, validate the architecture of the ATLAS DataFlow and prove that the system is robust, flexible and scalable enough to cope with the final requirements of the ATLAS experiment.

  17. Maximum-Likelihood Detection Of Noncoherent CPM

    NASA Technical Reports Server (NTRS)

    Divsalar, Dariush; Simon, Marvin K.

    1993-01-01

    Simplified detectors proposed for use in maximum-likelihood-sequence detection of symbols in alphabet of size M transmitted by uncoded, full-response continuous phase modulation over radio channel with additive white Gaussian noise. Structures of receivers derived from particular interpretation of maximum-likelihood metrics. Receivers include front ends, structures of which depends only on M, analogous to those in receivers of coherent CPM. Parts of receivers following front ends have structures, complexity of which would depend on N.

  18. The maximum specific hydrogen-producing activity of anaerobic mixed cultures: definition and determination

    PubMed Central

    Mu, Yang; Yang, Hou-Yun; Wang, Ya-Zhou; He, Chuan-Shu; Zhao, Quan-Bao; Wang, Yi; Yu, Han-Qing

    2014-01-01

    Fermentative hydrogen production from wastes has many advantages compared to various chemical methods. Methodology for characterizing the hydrogen-producing activity of anaerobic mixed cultures is essential for monitoring reactor operation in fermentative hydrogen production, however there is lack of such kind of standardized methodologies. In the present study, a new index, i.e., the maximum specific hydrogen-producing activity (SHAm) of anaerobic mixed cultures, was proposed, and consequently a reliable and simple method, named SHAm test, was developed to determine it. Furthermore, the influences of various parameters on the SHAm value determination of anaerobic mixed cultures were evaluated. Additionally, this SHAm assay was tested for different types of substrates and bacterial inocula. Our results demonstrate that this novel SHAm assay was a rapid, accurate and simple methodology for determining the hydrogen-producing activity of anaerobic mixed cultures. Thus, application of this approach is beneficial to establishing a stable anaerobic hydrogen-producing system. PMID:24912488

  19. The maximum specific hydrogen-producing activity of anaerobic mixed cultures: definition and determination

    NASA Astrophysics Data System (ADS)

    Mu, Yang; Yang, Hou-Yun; Wang, Ya-Zhou; He, Chuan-Shu; Zhao, Quan-Bao; Wang, Yi; Yu, Han-Qing

    2014-06-01

    Fermentative hydrogen production from wastes has many advantages compared to various chemical methods. Methodology for characterizing the hydrogen-producing activity of anaerobic mixed cultures is essential for monitoring reactor operation in fermentative hydrogen production, however there is lack of such kind of standardized methodologies. In the present study, a new index, i.e., the maximum specific hydrogen-producing activity (SHAm) of anaerobic mixed cultures, was proposed, and consequently a reliable and simple method, named SHAm test, was developed to determine it. Furthermore, the influences of various parameters on the SHAm value determination of anaerobic mixed cultures were evaluated. Additionally, this SHAm assay was tested for different types of substrates and bacterial inocula. Our results demonstrate that this novel SHAm assay was a rapid, accurate and simple methodology for determining the hydrogen-producing activity of anaerobic mixed cultures. Thus, application of this approach is beneficial to establishing a stable anaerobic hydrogen-producing system.

  20. 49 CFR 195.406 - Maximum operating pressure.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... HAZARDOUS LIQUIDS BY PIPELINE Operation and Maintenance § 195.406 Maximum operating pressure. (a) Except for surge pressures and other variations from normal operations, no operator may operate a pipeline at a... 49 Transportation 3 2010-10-01 2010-10-01 false Maximum operating pressure. 195.406 Section 195...

  1. 49 CFR 195.406 - Maximum operating pressure.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... HAZARDOUS LIQUIDS BY PIPELINE Operation and Maintenance § 195.406 Maximum operating pressure. (a) Except for surge pressures and other variations from normal operations, no operator may operate a pipeline at a... 49 Transportation 3 2012-10-01 2012-10-01 false Maximum operating pressure. 195.406 Section 195...

  2. 49 CFR 195.406 - Maximum operating pressure.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... HAZARDOUS LIQUIDS BY PIPELINE Operation and Maintenance § 195.406 Maximum operating pressure. (a) Except for surge pressures and other variations from normal operations, no operator may operate a pipeline at a... 49 Transportation 3 2014-10-01 2014-10-01 false Maximum operating pressure. 195.406 Section 195...

  3. 49 CFR 195.406 - Maximum operating pressure.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... HAZARDOUS LIQUIDS BY PIPELINE Operation and Maintenance § 195.406 Maximum operating pressure. (a) Except for surge pressures and other variations from normal operations, no operator may operate a pipeline at a... 49 Transportation 3 2011-10-01 2011-10-01 false Maximum operating pressure. 195.406 Section 195...

  4. 49 CFR 195.406 - Maximum operating pressure.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... HAZARDOUS LIQUIDS BY PIPELINE Operation and Maintenance § 195.406 Maximum operating pressure. (a) Except for surge pressures and other variations from normal operations, no operator may operate a pipeline at a... 49 Transportation 3 2013-10-01 2013-10-01 false Maximum operating pressure. 195.406 Section 195...

  5. 40 CFR 35.235 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.235 Section 35.235 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE...)(1)) § 35.235 Maximum federal share. The Regional Administrator may provide up to 100 percent of the...

  6. 40 CFR 35.315 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.315 Section 35.315 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE... 28) § 35.315 Maximum federal share. The Regional Administrator may provide up to 75 percent of the...

  7. 40 CFR 35.215 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.215 Section 35.215 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE...)) § 35.215 Maximum federal share. The Regional Administrator may provide up to 75 percent of the approved...

  8. 40 CFR 35.715 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.715 Section 35.715 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE... Monitoring (section 28) § 35.715 Maximum federal share. The Regional Administrator may provide up to 75...

  9. 29 CFR 4022.22 - Maximum guaranteeable benefit.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Maximum guaranteeable benefit. 4022.22 Section 4022.22 Labor Regulations Relating to Labor (Continued) PENSION BENEFIT GUARANTY CORPORATION COVERAGE AND... Maximum guaranteeable benefit. Subject to section 4022B of ERISA and part 4022B of this chapter, benefits...

  10. 40 CFR 35.335 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.335 Section 35.335 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE...)(2)) § 35.335 Maximum federal share. The Regional Administrator may provide up to 75 percent of the...

  11. 40 CFR 35.649 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.649 Section 35.649 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE... and Training (section 23(a)(2)) § 35.649 Maximum federal share. The Regional Administrator may provide...

  12. 40 CFR 35.252 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.252 Section 35.252 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE...)(1)) § 35.252 Maximum federal share. The Regional Administrator may provide up to 100 percent of the...

  13. Maximum likelihood method for estimating airplane stability and control parameters from flight data in frequency domain

    NASA Technical Reports Server (NTRS)

    Klein, V.

    1980-01-01

    A frequency domain maximum likelihood method is developed for the estimation of airplane stability and control parameters from measured data. The model of an airplane is represented by a discrete-type steady state Kalman filter with time variables replaced by their Fourier series expansions. The likelihood function of innovations is formulated, and by its maximization with respect to unknown parameters the estimation algorithm is obtained. This algorithm is then simplified to the output error estimation method with the data in the form of transformed time histories, frequency response curves, or spectral and cross-spectral densities. The development is followed by a discussion on the equivalence of the cost function in the time and frequency domains, and on advantages and disadvantages of the frequency domain approach. The algorithm developed is applied in four examples to the estimation of longitudinal parameters of a general aviation airplane using computer generated and measured data in turbulent and still air. The cost functions in the time and frequency domains are shown to be equivalent; therefore, both approaches are complementary and not contradictory. Despite some computational advantages of parameter estimation in the frequency domain, this approach is limited to linear equations of motion with constant coefficients.

  14. An investigation of home advantage in the Summer Paralympic Games.

    PubMed

    Wilson, Darryl; Ramchandani, Girish

    2017-01-01

    There is a paucity of home advantage research set in the context of para-sport events. It is this gap in the knowledge that this paper addresses by investigating the prevalence and size of home advantage in the Summer Paralympic Games. Using a standardised measure of success, we compared the performances of nations when competing at home with their own performances away from home in the competition between 1960 and 2016. Both country-level and individual sport-level analyses were conducted for this time frame. A Wilcoxon signed rank test was used to determine whether there was a genuine difference in nations' performance under host and non-host conditions. Spearman's rank-order correlation was run to assess the relationship between nation quality and home advantage. Strong evidence of a home advantage effect in the Summer Paralympic Games was found at country level ( p  < 0.01). When examining individual sports, only athletics, table tennis, and wheelchair fencing returned a significant home advantage effect ( p  < 0.05). Possible explanations for these findings are discussed. The size of the home advantage effect was not significantly correlated with the quality or strength of the host nation ( p  > 0.10). While our results confirm that home advantage is prevalent in the Summer Paralympic Games at an overall country level and within specific sports, they do not explain fully why such an effect does exist. Future studies should investigate the causes of home advantage in the competition and also draw comparisons with the Summer Olympic Games to explore any differences between para-sport events and able-bodied events.

  15. Contextual Advantage for State Discrimination

    NASA Astrophysics Data System (ADS)

    Schmid, David; Spekkens, Robert W.

    2018-02-01

    Finding quantitative aspects of quantum phenomena which cannot be explained by any classical model has foundational importance for understanding the boundary between classical and quantum theory. It also has practical significance for identifying information processing tasks for which those phenomena provide a quantum advantage. Using the framework of generalized noncontextuality as our notion of classicality, we find one such nonclassical feature within the phenomenology of quantum minimum-error state discrimination. Namely, we identify quantitative limits on the success probability for minimum-error state discrimination in any experiment described by a noncontextual ontological model. These constraints constitute noncontextuality inequalities that are violated by quantum theory, and this violation implies a quantum advantage for state discrimination relative to noncontextual models. Furthermore, our noncontextuality inequalities are robust to noise and are operationally formulated, so that any experimental violation of the inequalities is a witness of contextuality, independently of the validity of quantum theory. Along the way, we introduce new methods for analyzing noncontextuality scenarios and demonstrate a tight connection between our minimum-error state discrimination scenario and a Bell scenario.

  16. 40 CFR 35.245 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.245 Section 35.245 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE... (section 23(a)(2)) § 35.245 Maximum federal share. The Regional Administrator may provide up to 50 percent...

  17. 40 CFR 35.385 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.385 Section 35.385 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE...)(3)) § 35.385 Maximum federal share. EPA may provide up to 75 percent of the approved work plan costs...

  18. 40 CFR 35.642 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.642 Section 35.642 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE... (section 23(a)(1)) § 35.642 Maximum federal share. The Regional Administrator may provide up to 100 percent...

  19. 24 CFR 241.875 - Maximum claim period.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Maximum claim period. 241.875 Section 241.875 Housing and Urban Development Regulations Relating to Housing and Urban Development... § 241.875 Maximum claim period. Notice of intention to file claim on a form prescribed by the...

  20. 24 CFR 232.875 - Maximum claim period.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Maximum claim period. 232.875 Section 232.875 Housing and Urban Development Regulations Relating to Housing and Urban Development... Insurance § 232.875 Maximum claim period. Notice of intention to file claim on a form prescribed by the...

  1. 40 CFR 35.725 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.725 Section 35.725 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE... Grants (pub.l. 105-276) § 35.725 Maximum federal share. The Regional Administrator may provide up to 100...

  2. 40 CFR 35.659 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.659 Section 35.659 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE... (section 23(a)(1)) § 35.659 Maximum federal share. The Regional Administrator may provide up to 100 percent...

  3. Software Tool for Computing Maximum Von Mises Stress

    NASA Technical Reports Server (NTRS)

    Chen, Long Y.; Knutson, Kurt; Martin, Eric

    2007-01-01

    The maximum Van Mises stress and stress direction are of interest far analyzing launch accelerations such as with the Mass Acceleration Curves developed by JPL. Maximum launch stresses can be combined with appropriate load cases at consistent locations with resulting stress tensors. Maximum Van Mises stress is also of interest for understanding maximum operational loading such as traverse events. - For example, planetary traversing simulations may prescribe bounding acceleration values during traverse for a rover such as Mars Science Lab (MSL) in (X,Y,Z) of the rover. - Such accelerations can be really in any directions for many parts such as a mast or head mounted components which can be in numerous configurations and orientations when traversing a planet surface.

  4. [Internet research methods: advantages and challenges].

    PubMed

    Liu, Yi; Tien, Yueh-Hsuan

    2009-12-01

    Compared to traditional research methods, using the Internet to conduct research offers a number of advantages to the researcher, which include increased access to sensitive issues and vulnerable / hidden populations; decreased data entry time requirements; and enhanced data accuracy. However, Internet research also presents certain challenges to the researcher. In this article, the advantages and challenges of Internet research methods are discussed in four principle issue areas: (a) recruitment, (b) data quality, (c) practicality, and (d) ethics. Nursing researchers can overcome problems related to sampling bias and data truthfulness using creative methods; resolve technical problems through collaboration with other disciplines; and protect participant's privacy, confidentiality and data security by maintaining a high level of vigilance. Once such issues have been satisfactorily addressed, the Internet should open a new window for Taiwan nursing research.

  5. The Advantages and Disadvantages of Seeking Commonality in Military Equipment

    DTIC Science & Technology

    2011-01-01

    rand 2011 www.rand.org The Advantages and Disadvantages of Seeking Commonality in Military Equipment I ncreasingly, the Army and the Department...advantages and disadvantages of commonality and developed a decision aid to help Army policymakers manage these tradeoffs. The study drew upon...TITLE AND SUBTITLE The Advantages and Disadvantages of Seeking Commonality in Military Equipment 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM

  6. The second leg home advantage: evidence from European football cup competitions.

    PubMed

    Page, Lionel; Page, Katie

    2007-12-01

    The home advantage is a widely acknowledged sporting phenomenon, especially in association football. Here, we examine the second leg home advantage, an effect that is discussed in the public domain but which has received very little scientific attention. The second leg home advantage effect occurs when on average teams are more likely to win a two-stage knock-out competition when they play at home in the second leg. That is, both teams have a home advantage but this advantage is significantly greater for the team that plays at home second. Examining data from three different European Cup football competitions spanning 51 years, we show that the second leg home advantage is a real phenomenon. The second leg home team has more than a 50% probability to qualify for the next round in the competition even after controlling for extra time and team ability as possible alternative explanations. The second leg home advantage appears, however, to have decreased significantly over the past decade. Possible reasons for its existence and subsequent decline are presented.

  7. Benefits of a programme taking advantage of patient‐instructors to teach and assess musculoskeletal skills in medical students

    PubMed Central

    Bideau, M; Guerne, P‐A; Bianchi, M‐P; Huber, P

    2006-01-01

    Aim To evaluate a rheumatoid arthritis patient‐instructor‐based formation–assessment programme for its ability to improve and assess musculoskeletal knowledge and skills in third‐year medical students. Methods (1) The quality of our musculoskeletal teaching was assessed before patient‐instructor intervention through an open‐questions test (pre‐test) and performance record forms (PRFs) filled in by the patient‐instructors. (2) The improvement afforded by patient‐instructors was evaluated through a second (identical) open‐questions test (post‐test). (3) The resulting skills in the students were further assessed by an individual patient‐instructors physical status record form (PSRF), filled in by the students. Results Pre‐tests and post‐tests showed an improvement in correct answers from a mean score of 39% to 47%. The history‐taking questions that obtained <50% scores in the pre‐test mostly dealt with the consequences of a chronic illness. Intervention of patient‐instructors especially improved knowledge of the psychosocial aspects and side effects of drugs. With regard to physical examination, patient‐instructors makedly improved the identification of assessment of signs of active and chronic inflammation. PRF analysis showed that 10 of 28 questions answered by <50% of the students were related to disease characteristics of rheumatoid arthritis, extra‐articular signs, side effects of drugs and psychosocial aspects. Analysis of the PSRF indicated that the weakness of our students' physical examination abilities in particular is related to recognising the types of swelling and differentiating tenderness from pain on motion. Conclusion This study proves the considerable benefits of the involvement of patient‐instructors in the teaching and assessment of clinical skills in students. PMID:16707537

  8. Long-distance transport of ventilated patients: advantages and limitations of air medical repatriation on commercial airlines.

    PubMed

    Veldman, Alex; Diefenbach, Michael; Fischer, Doris; Benton, Alida; Bloch, Richard

    2004-01-01

    To illustrate the advantages and limitations of transporting ventilated intensive care unit patients over intercontinental distances on commercial airlines, this case series reports 8 ventilated patients repatriated by an air medical transport company. Eight ventilated patients, 3 suffering from internal and 5 from neurologic diseases. Distances ranged from 1700 to 10280 nautical miles with transport times from 04:10 hours to 21:55 hours. For 3 patients, a dedicated patient transport compartment (PTC) in the aircraft cabin was used. All patients were ventilator-dependent for a minimum of 11 days before transport (48 days median, 113 days maximum). One patient went into cardiac arrest during the flight and died. None of the other patients experienced any emergency or invasive procedures, other than peripheral venous access necessary during the flight. In all patients, ventilation was adjusted with respect to the blood gas analysis at least once during the transport. No technical failures or drop-outs occurred during the flights. None of the flights had to be diverted for technical or medical reasons. Long distance international transport of ventilated intensive care unit patients is an extremely cost intensive and logistically challenging task. In a certain subgroup of relatively stable ventilated patients, transport on commercial airlines offers advantages in terms of cost effectiveness and reduced transport time and acceleration/deceleration trauma as a result of multiple fuel stops.

  9. Maximum spectral demands in the near-fault region

    USGS Publications Warehouse

    Huang, Y.-N.; Whittaker, A.S.; Luco, N.

    2008-01-01

    The Next Generation Attenuation (NGA) relationships for shallow crustal earthquakes in the western United States predict a rotated geometric mean of horizontal spectral demand, termed GMRotI50, and not maximum spectral demand. Differences between strike-normal, strike-parallel, geometric-mean, and maximum spectral demands in the near-fault region are investigated using 147 pairs of records selected from the NGA strong motion database. The selected records are for earthquakes with moment magnitude greater than 6.5 and for closest site-to-fault distance less than 15 km. Ratios of maximum spectral demand to NGA-predicted GMRotI50 for each pair of ground motions are presented. The ratio shows a clear dependence on period and the Somerville directivity parameters. Maximum demands can substantially exceed NGA-predicted GMRotI50 demands in the near-fault region, which has significant implications for seismic design, seismic performance assessment, and the next-generation seismic design maps. Strike-normal spectral demands are a significantly unconservative surrogate for maximum spectral demands for closest distance greater than 3 to 5 km. Scale factors that transform NGA-predicted GMRotI50 to a maximum spectral demand in the near-fault region are proposed. ?? 2008, Earthquake Engineering Research Institute.

  10. Determination of the maximum-depth to potential field sources by a maximum structural index method

    NASA Astrophysics Data System (ADS)

    Fedi, M.; Florio, G.

    2013-01-01

    A simple and fast determination of the limiting depth to the sources may represent a significant help to the data interpretation. To this end we explore the possibility of determining those source parameters shared by all the classes of models fitting the data. One approach is to determine the maximum depth-to-source compatible with the measured data, by using for example the well-known Bott-Smith rules. These rules involve only the knowledge of the field and its horizontal gradient maxima, and are independent from the density contrast. Thanks to the direct relationship between structural index and depth to sources we work out a simple and fast strategy to obtain the maximum depth by using the semi-automated methods, such as Euler deconvolution or depth-from-extreme-points method (DEXP). The proposed method consists in estimating the maximum depth as the one obtained for the highest allowable value of the structural index (Nmax). Nmax may be easily determined, since it depends only on the dimensionality of the problem (2D/3D) and on the nature of the analyzed field (e.g., gravity field or magnetic field). We tested our approach on synthetic models against the results obtained by the classical Bott-Smith formulas and the results are in fact very similar, confirming the validity of this method. However, while Bott-Smith formulas are restricted to the gravity field only, our method is applicable also to the magnetic field and to any derivative of the gravity and magnetic field. Our method yields a useful criterion to assess the source model based on the (∂f/∂x)max/fmax ratio. The usefulness of the method in real cases is demonstrated for a salt wall in the Mississippi basin, where the estimation of the maximum depth agrees with the seismic information.

  11. Using integration technology as a strategic advantage.

    PubMed

    Fry, P A

    1993-08-01

    The underlying premise of the Managed Competition Act previously cited is that through managed competition providers will be forced to lower care costs while increasing the level of positive care outcomes. Because it may also be that tomorrow's hospitals will find a severe rationing of technology, what can they do to prepare? Most of the systems in place today already have built within them all the necessary potential to address this premise and technology requirement with no change, no conversion, no expense for new equipment and software, and no disruption in day-to-day operations, just a little re-engineering. Today, however, these systems are similar to a 20-mule team pulling in different directions: all the power is there, but the wagon remains motionless and totally unable to reach its objective. It takes a skilled wagonmaster to bring them together, to make the mules work as a cohesive unit, to make the power of 20 mules greater than the sum of 20 mules. So it is and will be for the hospital of tomorrow. System integration is no longer a question of whether but of when. Those hospitals that use it today as a strategic advantage will be in a better position tomorrow to use it as a competitive strategic advantage in an environment that will reward low cost and high positive care outcomes and will penalize those that cannot compete. The technology is already here and economically within reach of nearly every hospital, just waiting to be used. The question that must nag all of us who want to make the health care system of America better is, Why not make the when now? Rich Helppie, president of Superior Consultant Company, summarized the solution well: The old ways will not give way to the new overnight. The re-engineering process in healthcare must evolve. Compared to the last 20 years, however, such evolution may appear to be a massive, forthright, complete, comprehensive, drastic and rapid revolution. Survival is the name of the game, and for healthcare

  12. Thoracoscopic versus robotic approaches: advantages and disadvantages.

    PubMed

    Wei, Benjamin; D'Amico, Thomas A

    2014-05-01

    The overall advantages of thoracoscopy over thoracotomy in terms of patient recovery have been fairly well established. The use of robotics, however, is a newer and less proven modality in the realm of thoracic surgery. Robotics offers distinct advantages and disadvantages in comparison with video-assisted thoracoscopic surgery. Robotic technology is now used for a variety of complex cardiac, urologic, and gynecologic procedures including mitral valve repair and microsurgical treatment of male infertility. This article addresses the potential benefits and limitations of using the robotic platform for the performance of a variety of thoracic operations. Copyright © 2014 Elsevier Inc. All rights reserved.

  13. Information Technology: Tomorrow's Advantage Today.

    ERIC Educational Resources Information Center

    Haag, Stephen; Keen, Peter

    This textbook is designed for a one-semester introductory course in which the goal is to give students a foundation in the basics of information technology (IT). It focuses on how the technology works, issues relating to its use and development, how it can lend personal and business advantages, and how it is creating a globally networked society.…

  14. Achieving a sustainable service advantage.

    PubMed

    Coyne, K P

    1993-01-01

    Many managers believe that superior service should play little or no role in competitive strategy; they maintain that service innovations are inherently copiable. However, the author states that this view is too narrow. For a company to achieve a lasting service advantage, it must base a new service on a capability gap that competitors cannot or will not copy.

  15. 33 CFR 401.3 - Maximum vessel dimensions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Maximum vessel dimensions. 401.3... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Condition of Vessels § 401.3 Maximum vessel dimensions..., and having dimensions that do not exceed the limits set out in the block diagram in appendix I of this...

  16. 33 CFR 401.3 - Maximum vessel dimensions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 3 2014-07-01 2014-07-01 false Maximum vessel dimensions. 401.3... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Condition of Vessels § 401.3 Maximum vessel dimensions..., and having dimensions that do not exceed the limits set out in the block diagram in appendix I of this...

  17. 33 CFR 401.3 - Maximum vessel dimensions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Maximum vessel dimensions. 401.3... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Condition of Vessels § 401.3 Maximum vessel dimensions..., and having dimensions that do not exceed the limits set out in the block diagram in appendix I of this...

  18. 33 CFR 401.3 - Maximum vessel dimensions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Maximum vessel dimensions. 401.3... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Condition of Vessels § 401.3 Maximum vessel dimensions..., and having dimensions that do not exceed the limits set out in the block diagram in appendix I of this...

  19. 40 CFR 35.615 - Maximum federal share.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Maximum federal share. 35.615 Section 35.615 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE... (section 104(b)(3)) § 35.615 Maximum federal share. EPA may provide up to 75 percent of the approved work...

  20. 30 CFR 57.19061 - Maximum hoisting speeds.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Maximum hoisting speeds. 57.19061 Section 57... Hoisting Hoisting Procedures § 57.19061 Maximum hoisting speeds. The safe speed for hoisting persons shall be determined for each shaft, and this speed shall not be exceeded. Persons shall not be hoisted at a...

  1. 30 CFR 56.19061 - Maximum hoisting speeds.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum hoisting speeds. 56.19061 Section 56... Hoisting Procedures § 56.19061 Maximum hoisting speeds. The safe speed for hoisting persons shall be determined for each shaft, and this speed shall not be exceeded. Persons should not be hoisted at a speed...

  2. 30 CFR 57.19061 - Maximum hoisting speeds.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Maximum hoisting speeds. 57.19061 Section 57... Hoisting Hoisting Procedures § 57.19061 Maximum hoisting speeds. The safe speed for hoisting persons shall be determined for each shaft, and this speed shall not be exceeded. Persons shall not be hoisted at a...

  3. 30 CFR 56.19061 - Maximum hoisting speeds.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Maximum hoisting speeds. 56.19061 Section 56... Hoisting Procedures § 56.19061 Maximum hoisting speeds. The safe speed for hoisting persons shall be determined for each shaft, and this speed shall not be exceeded. Persons should not be hoisted at a speed...

  4. Taking Advantage of Automated Assessment of Student-Constructed Graphs in Science

    ERIC Educational Resources Information Center

    Vitale, Jonathan M.; Lai, Kevin; Linn, Marcia C.

    2015-01-01

    We present a new system for automated scoring of graph construction items that address complex science concepts, feature qualitative prompts, and support a range of possible solutions. This system utilizes analysis of spatial features (e.g., slope of a line) to evaluate potential student ideas represented within graphs. Student ideas are then…

  5. Taking Advantage of Selective Change Driven Processing for 3D Scanning

    PubMed Central

    Vegara, Francisco; Zuccarello, Pedro; Boluda, Jose A.; Pardo, Fernando

    2013-01-01

    This article deals with the application of the principles of SCD (Selective Change Driven) vision to 3D laser scanning. Two experimental sets have been implemented: one with a classical CMOS (Complementary Metal-Oxide Semiconductor) sensor, and the other one with a recently developed CMOS SCD sensor for comparative purposes, both using the technique known as Active Triangulation. An SCD sensor only delivers the pixels that have changed most, ordered by the magnitude of their change since their last readout. The 3D scanning method is based on the systematic search through the entire image to detect pixels that exceed a certain threshold, showing the SCD approach to be ideal for this application. Several experiments for both capturing strategies have been performed to try to find the limitations in high speed acquisition/processing. The classical approach is limited by the sequential array acquisition, as predicted by the Nyquist–Shannon sampling theorem, and this has been experimentally demonstrated in the case of a rotating helix. These limitations are overcome by the SCD 3D scanning prototype achieving a significantly higher performance. The aim of this article is to compare both capturing strategies in terms of performance in the time and frequency domains, so they share all the static characteristics including resolution, 3D scanning method, etc., thus yielding the same 3D reconstruction in static scenes. PMID:24084110

  6. Taking Advantage of a Corrosion Problem to Solve a Pollution Problem

    ERIC Educational Resources Information Center

    Palomar-Ramirez, Carlos F.; Bazan-Martinez, Jose A.; Palomar-Pardave, Manuel E.; Romero-Romo, Mario A.; Ramirez-Silva, Maria Teresa

    2011-01-01

    Some simple chemistry is used to demonstrate how Fe(II) ions, formed during iron corrosion in acid aqueous solution, can reduce toxic Cr(VI) species, forming soluble Cr(III) and Fe(III) ions. These ions, in turn, can be precipitated by neutralizing the solution. The procedure provides a treatment for industrial wastewaters commonly found in…

  7. Cognitive strategies take advantage of the cooperative potential of heterogeneous networks

    NASA Astrophysics Data System (ADS)

    Vukov, Jeromos; Santos, Francisco C.; Pacheco, Jorge M.

    2012-06-01

    Understanding the emergence and maintenance of cooperation is one of the most challenging topics of our time. Evolutionary game theory offers a very flexible framework within which to address this challenge. Here we use the prisoner's dilemma game to investigate the performance of individuals who are capable of adopting reactive strategies in communities structurally organized by means of Barabási-Albert scale-free networks. We find that basic cognitive abilities, such as the capability to distinguish their partners and act according to their previous actions, enable cooperation to thrive. This result is particularly significant whenever fear is the leading social tension, as this fosters retaliation, thus enforcing and sustaining cooperation. Being able to simultaneously reward fellow cooperators and punish defectors proves instrumental in achieving cooperation and the welfare of the community. As a result, central individuals can successfully lead the community and turn defective players into cooperative ones. Finally, even when participation costs—known to be detrimental to cooperation in scale-free networks—are explicitly included, we find that basic cognitive abilities have enough potential to help cooperation to prevail.

  8. Extended maximum likelihood halo-independent analysis of dark matter direct detection data

    DOE PAGES

    Gelmini, Graciela B.; Georgescu, Andreea; Gondolo, Paolo; ...

    2015-11-24

    We extend and correct a recently proposed maximum-likelihood halo-independent method to analyze unbinned direct dark matter detection data. Instead of the recoil energy as independent variable we use the minimum speed a dark matter particle must have to impart a given recoil energy to a nucleus. This has the advantage of allowing us to apply the method to any type of target composition and interaction, e.g. with general momentum and velocity dependence, and with elastic or inelastic scattering. We prove the method and provide a rigorous statistical interpretation of the results. As first applications, we find that for dark mattermore » particles with elastic spin-independent interactions and neutron to proton coupling ratio f n/f p=-0.7, the WIMP interpretation of the signal observed by CDMS-II-Si is compatible with the constraints imposed by all other experiments with null results. We also find a similar compatibility for exothermic inelastic spin-independent interactions with f n/f p=-0.8.« less

  9. The Cultural Boundaries of Perspective-Taking: When and Why Perspective-Taking Reduces Stereotyping.

    PubMed

    Wang, Cynthia S; Lee, Margaret; Ku, Gillian; Leung, Angela K-Y

    2018-06-01

    Research conducted in Western cultures indicates that perspective-taking is an effective social strategy for reducing stereotyping. The current article explores whether and why the effects of perspective-taking on stereotyping differ across cultures. Studies 1 and 2 established that perspective-taking reduces stereotyping in Western but not in East Asian cultures. Using a socioecological framework, Studies 2 and 3 found that relational mobility, that is, the extent to which individuals' social environments provide them opportunities to choose new relationships and terminate old ones, explained our effect: Perspective-taking was negatively associated with stereotyping in relationally mobile (Western) but not in relationally stable (East Asian) environments. Finally, Study 4 examined the proximal psychological mechanism underlying the socioecological effect: Individuals in relationally mobile environments are more motivated to develop new relationships than those in relationally stable environments. Subsequently, when this motivation is high, perspective-taking increases self-target group overlap, which then decreases stereotyping.

  10. The Real Transformation: Building and Maintaining Long-Term Competitive Advantage

    DTIC Science & Technology

    2003-01-01

    TERM COMPETITIVE ADVANTAGE LTC EDWARD C. CARDON, USA A TRANFORMATION PAPER FOR THE CHAIRMAN OF THE JOINT CHIEFS OF STAFF SEMINAR...SUBTITLE The Real Transformation: Building and Maintaining Long-Term Competitive Advantage 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT...long-term military competitive advantage in comparison to the rest of the world.4 This approach suggests a model that places competition as the

  11. The Advantages of the MGL-140 for the Marine Corps

    DTIC Science & Technology

    2006-02-07

    comparison of the specifications of the M203 and MGL-140 portrays the fundamental benefits of modern weapon systems technology, the true advantages of the...The Advantages of the MGL-140 for the Marine Corps Subject Area Warfighting EWS 2006 Contemporary Issues Paper The... Advantages of the MGL-140 for the Marine Corps Submitted by Captain OF Adeyemi to Majors AL Shaw & WC Stophel, CG 3 7 February 2006

  12. Spatio-temporal observations of tertiary ozone maximum

    NASA Astrophysics Data System (ADS)

    Sofieva, V. F.; Kyrölä, E.; Verronen, P. T.; Seppälä, A.; Tamminen, J.; Marsh, D. R.; Smith, A. K.; Bertaux, J.-L.; Hauchecorne, A.; Dalaudier, F.; Fussen, D.; Vanhellemont, F.; Fanton D'Andon, O.; Barrot, G.; Guirlet, M.; Fehr, T.; Saavedra, L.

    2009-03-01

    We present spatio-temporal distributions of tertiary ozone maximum (TOM), based on GOMOS (Global Ozone Monitoring by Occultation of Stars) ozone measurements in 2002-2006. The tertiary ozone maximum is typically observed in the high-latitude winter mesosphere at altitude ~72 km. Although the explanation for this phenomenon has been found recently - low concentrations of odd-hydrogen cause the subsequent decrease in odd-oxygen losses - models have had significant deviations from existing observations until recently. Good coverage of polar night regions by GOMOS data has allowed for the first time obtaining spatial and temporal observational distributions of night-time ozone mixing ratio in the mesosphere. The distributions obtained from GOMOS data have specific features, which are variable from year to year. In particular, due to a long lifetime of ozone in polar night conditions, the downward transport of polar air by the meridional circulation is clearly observed in the tertiary ozone maximum time series. Although the maximum tertiary ozone mixing ratio is achieved close to the polar night terminator (as predicted by the theory), TOM can be observed also at very high latitudes, not only in the beginning and at the end, but also in the middle of winter. We have compared the observational spatio-temporal distributions of tertiary ozone maximum with that obtained using WACCM (Whole Atmosphere Community Climate Model) and found that the specific features are reproduced satisfactorily by the model. Since ozone in the mesosphere is very sensitive to HOx concentrations, energetic particle precipitation can significantly modify the shape of the ozone profiles. In particular, GOMOS observations have shown that the tertiary ozone maximum was temporarily destroyed during the January 2005 and December 2006 solar proton events as a result of the HOx enhancement from the increased ionization.

  13. 10 CFR 600.20 - Maximum DOE obligation.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... DOE obligation. (a) The maximum DOE obligation to the recipient is— (1) For monetary awards, the amount shown in the award as the amount of DOE funds obligated, and (2) Any designated property. (b) DOE... 10 Energy 4 2011-01-01 2011-01-01 false Maximum DOE obligation. 600.20 Section 600.20 Energy...

  14. 10 CFR 600.20 - Maximum DOE obligation.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... DOE obligation. (a) The maximum DOE obligation to the recipient is— (1) For monetary awards, the amount shown in the award as the amount of DOE funds obligated, and (2) Any designated property. (b) DOE... 10 Energy 4 2013-01-01 2013-01-01 false Maximum DOE obligation. 600.20 Section 600.20 Energy...

  15. 10 CFR 600.20 - Maximum DOE obligation.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... DOE obligation. (a) The maximum DOE obligation to the recipient is— (1) For monetary awards, the amount shown in the award as the amount of DOE funds obligated, and (2) Any designated property. (b) DOE... 10 Energy 4 2012-01-01 2012-01-01 false Maximum DOE obligation. 600.20 Section 600.20 Energy...

  16. 10 CFR 600.20 - Maximum DOE obligation.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... DOE obligation. (a) The maximum DOE obligation to the recipient is— (1) For monetary awards, the amount shown in the award as the amount of DOE funds obligated, and (2) Any designated property. (b) DOE... 10 Energy 4 2014-01-01 2014-01-01 false Maximum DOE obligation. 600.20 Section 600.20 Energy...

  17. 40 CFR 141.55 - Maximum contaminant level goals for radionuclides.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Maximum contaminant level goals for... PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Maximum Contaminant Level Goals and Maximum Residual Disinfectant Level Goals § 141.55 Maximum contaminant level goals for radionuclides...

  18. 40 CFR 141.55 - Maximum contaminant level goals for radionuclides.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Maximum contaminant level goals for... PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Maximum Contaminant Level Goals and Maximum Residual Disinfectant Level Goals § 141.55 Maximum contaminant level goals for radionuclides...

  19. Home advantage and player nationality in international club football.

    PubMed

    Poulter, Damian R

    2009-06-01

    The home advantage effect was investigated at a team and player level in Union of European Football Associations (UEFA) Champions League football using in-depth performance and disciplinary variables. Performance analysis revealed that the home team scored more goals, had more shots on and off target, had a greater share of possession, and won more corners than the away team. There was an opposite trend for disciplinary variables, with the home team committing less fouls than the away team, and receiving less yellow and red cards. There were home advantage effects at player level for goals, total shots, shots on target, assists, and yellow cards, as found in the team analysis. In addition, foreign players demonstrated a home advantage effect for goals scored, whereas domestic players scored an equivalent number of goals at home and away venues. Results are discussed in relation to the home advantage literature and wider implications for the sport.

  20. Weak scale from the maximum entropy principle

    NASA Astrophysics Data System (ADS)

    Hamada, Yuta; Kawai, Hikaru; Kawana, Kiyoharu

    2015-03-01

    The theory of the multiverse and wormholes suggests that the parameters of the Standard Model (SM) are fixed in such a way that the radiation of the S3 universe at the final stage S_rad becomes maximum, which we call the maximum entropy principle. Although it is difficult to confirm this principle generally, for a few parameters of the SM, we can check whether S_rad actually becomes maximum at the observed values. In this paper, we regard S_rad at the final stage as a function of the weak scale (the Higgs expectation value) vh, and show that it becomes maximum around vh = {{O}} (300 GeV) when the dimensionless couplings in the SM, i.e., the Higgs self-coupling, the gauge couplings, and the Yukawa couplings are fixed. Roughly speaking, we find that the weak scale is given by vh ˜ T_{BBN}2 / (M_{pl}ye5), where ye is the Yukawa coupling of electron, T_BBN is the temperature at which the Big Bang nucleosynthesis starts, and M_pl is the Planck mass.

  1. 49 CFR 230.27 - Maximum shearing strength of rivets.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Maximum shearing strength of rivets. 230.27 Section 230.27 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD... Appurtenances Strength of Materials § 230.27 Maximum shearing strength of rivets. The maximum shearing strength...

  2. 49 CFR 230.27 - Maximum shearing strength of rivets.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Maximum shearing strength of rivets. 230.27 Section 230.27 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD... Appurtenances Strength of Materials § 230.27 Maximum shearing strength of rivets. The maximum shearing strength...

  3. 5 CFR 338.601 - Prohibition of maximum-age requirements.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 5 Administrative Personnel 1 2013-01-01 2013-01-01 false Prohibition of maximum-age requirements... REGULATIONS QUALIFICATION REQUIREMENTS (GENERAL) Age Requirements § 338.601 Prohibition of maximum-age requirements. A maximum-age requirement may not be applied in either competitive or noncompetitive examinations...

  4. 5 CFR 338.601 - Prohibition of maximum-age requirements.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 5 Administrative Personnel 1 2012-01-01 2012-01-01 false Prohibition of maximum-age requirements... REGULATIONS QUALIFICATION REQUIREMENTS (GENERAL) Age Requirements § 338.601 Prohibition of maximum-age requirements. A maximum-age requirement may not be applied in either competitive or noncompetitive examinations...

  5. 5 CFR 338.601 - Prohibition of maximum-age requirements.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false Prohibition of maximum-age requirements... REGULATIONS QUALIFICATION REQUIREMENTS (GENERAL) Age Requirements § 338.601 Prohibition of maximum-age requirements. A maximum-age requirement may not be applied in either competitive or noncompetitive examinations...

  6. OECD Maximum Residue Limit Calculator

    EPA Pesticide Factsheets

    With the goal of harmonizing the calculation of maximum residue limits (MRLs) across the Organisation for Economic Cooperation and Development, the OECD has developed an MRL Calculator. View the calculator.

  7. 78 FR 70538 - Taking and Importing Marine Mammals; Taking Marine Mammals Incidental to Missile Launch...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-26

    ... years if NMFS finds, after notification and opportunity for public comment, that the taking will have a... taking. Regulations governing the taking of northern elephant seals (Mirounga angustirostris), Pacific...

  8. The power and robustness of maximum LOD score statistics.

    PubMed

    Yoo, Y J; Mendell, N R

    2008-07-01

    The maximum LOD score statistic is extremely powerful for gene mapping when calculated using the correct genetic parameter value. When the mode of genetic transmission is unknown, the maximum of the LOD scores obtained using several genetic parameter values is reported. This latter statistic requires higher critical value than the maximum LOD score statistic calculated from a single genetic parameter value. In this paper, we compare the power of maximum LOD scores based on three fixed sets of genetic parameter values with the power of the LOD score obtained after maximizing over the entire range of genetic parameter values. We simulate family data under nine generating models. For generating models with non-zero phenocopy rates, LOD scores maximized over the entire range of genetic parameters yielded greater power than maximum LOD scores for fixed sets of parameter values with zero phenocopy rates. No maximum LOD score was consistently more powerful than the others for generating models with a zero phenocopy rate. The power loss of the LOD score maximized over the entire range of genetic parameters, relative to the maximum LOD score calculated using the correct genetic parameter value, appeared to be robust to the generating models.

  9. Undermatched? School-Based Linguistic Status, College Going, and the Immigrant Advantage

    ERIC Educational Resources Information Center

    Callahan, Rebecca M.; Humphries, Melissa H.

    2016-01-01

    Considerable research investigates the immigrant advantage--the academic benefit first- and second-generation students experience relative to native-born peers. However, little work examines how school-based linguistic status may influence this advantage. Contradictory patterns exist: Research identifies both an immigrant advantage and a language…

  10. Neuroimaging and Drug Taking in Primates Abbreviated title: Neuroimaging and Drug taking

    PubMed Central

    Murnane, Kevin S.; Howell, Leonard L.

    2011-01-01

    Rationale Neuroimaging techniques have led to significant advances in our understanding of the neurobiology of drug-taking and the treatment of drug addiction in humans. Neuroimaging approaches provide a powerful translational approach that can link findings from humans and laboratory animals. Objective This review describes the utility of neuroimaging toward understanding the neurobiological basis of drug taking, and documents the close concordance that can be achieved among neuroimaging, neurochemical and behavioral endpoints. Results The study of drug interactions with dopamine and serotonin transporters in vivo has identified pharmacological mechanisms of action associated with the abuse liability of stimulants. Neuroimaging has identified the extended limbic system, including the prefrontal cortex and anterior cingulate, as important neuronal circuitry that underlies drug taking. The ability to conduct within-subject, longitudinal assessments of brain chemistry and neuronal function has enhanced our efforts to document long-term changes in dopamine D2 receptors, monoamine transporters, and prefrontal metabolism due to chronic drug exposure. Dysregulation of dopamine function and brain metabolic changes in areas involved in reward circuitry have been linked to drug-taking behavior, cognitive impairment and treatment response. Conclusions Experimental designs employing neuroimaging should consider well-documented determinants of drug taking, including pharmacokinetic considerations, subject history and environmental variables. Methodological issues to consider include limited molecular probes, lack of neurochemical specificity in brain activation studies, and the potential influence of anesthetics in animal studies. Nevertheless, these integrative approaches should have important implications for understanding drug-taking behavior and the treatment of drug addiction. PMID:21360099

  11. Maximum Power Training and Plyometrics for Cross-Country Running.

    ERIC Educational Resources Information Center

    Ebben, William P.

    2001-01-01

    Provides a rationale for maximum power training and plyometrics as conditioning strategies for cross-country runners, examining: an evaluation of training methods (strength training and maximum power training and plyometrics); biomechanic and velocity specificity (role in preventing injury); and practical application of maximum power training and…

  12. Diagnostic value of history-taking and physical examination for assessing meniscal tears of the knee in general practice.

    PubMed

    Wagemakers, Harry Pa; Heintjes, Edith M; Boks, Simone S; Berger, Marjolein Y; Verhaar, Jan An; Koes, Bart W; Bierma-Zeinstra, Sita Ma

    2008-01-01

    To assess the diagnostic value of history-taking and physical examination of meniscal tears in general practice. An observational study determining diagnostic values (sensitivity, specificity, predictive value, and likelihood ratios). General practice. Consecutive patients aged 18 to 65 years with a traumatic knee injury who consulted their general practitioner within 5 weeks after trauma. Participating patients filled out a questionnaire (history-taking) followed by a standardized physical examination. Assessment of meniscal tears was determined by means of magnetic resonance imaging (MRI) and was performed blinded for the results of physical examination and history-taking. Of the 134 patients included in this study, 47 had a meniscal tear. From history-taking, the determinants "age over 40 years," "continuation of activity impossible," and "weight-bearing during trauma" indicated an association with a meniscal tear after multivariate logistic regression analysis, whereas from physical examination only "pain at passive flexion" indicated an association. These associated determinants from history-taking showed some diagnostic value; the positive likelihood ratio (LR+) reached up to 2.0 for age over 40 years, whereas the isolated test pain at passive flexion from physical examination has less diagnostic value, with an LR+ of 1.3. Combining determinants from history-taking and physical examination improved the diagnostic value with a maximum LR+ of 5.8; however, this combination only applied to a limited number of patients. History-taking has some diagnostic value, whereas physical examination did not add any diagnostic value for detecting meniscal tears in general practice.

  13. Restoration of US Aid to Fiji: The Advantages of Obscurity

    DTIC Science & Technology

    1991-12-20

    RESTORATION OF US AID TO FIJI: THE ADVANTAGES OF OBSCURITY Elizabeth McKune NWC Class of 󈨠 December 20, 1991 Report Documentation Page Form...COVERED 20-12-1991 to 20-12-1991 4. TITLE AND SUBTITLE Restoration of US Aid to Fiji: The Advantages of Obscurity 5a. CONTRACT NUMBER 5b...unimportance were advantageous . PHASE ONE Background In the context of the South Pacific, however, Fiji was prominent, frequently cited as a model

  14. Optimal Control Design Advantages Utilizing Two-Degree-of-Freedom Controllers

    DTIC Science & Technology

    1993-12-01

    AFrTIGAE/ENYIV3D-27 AD--A273 839 D"TIC OPTIMAL CONTROL DESIGN ADVANTAGES UTILIZING TWO-DEGREE-OF-FREEDOM CONTROLLERS THESIS Michael J. Stephens...AFIT/GAE/ENY/93D-27 OPTIMAL CONTROL DESIGN ADVANTAGES UTILIZING TWO-DEGREE-OF-FREEDOM CONTROLLERS THESIS Presented to the Faculty of the Graduate...measurement noises compared to the I- DOF model. xvii OPTIMAL CONTROL DESIGN ADVANTAGES UTILIZING TWO-DEGREE-OF-FREEDOM CONTROLLERS I. Introduction L1

  15. Maximum number of children per sperm donor based on false paternity rate.

    PubMed

    Sánchez-Castelló, Isabel M; Gonzalvo, María C; Clavero, Ana; López-Regalado, María L; Mozas, Juan; Martínez-Granados, Luis; Navas, Purificación; Castilla, José A

    2017-03-01

    The aim of this study is to estimate the weight of each relevant factor in such unions of inadvertent consanguinity and to determine a "reasonable" limit for the number of children per donor, matching the probability of inadvertent consanguinity arising from the use of sperm donor in assisted reproduction with that of such a union arising from false paternity. In this study, we applied to Spanish data a mathematical model of consanguineous unions, taking into account the following factors: maximum number of live births/donor, fertility rate, average number of births per donor in a pregnancy, donor success rate, matings per phenotype, number of newborns/year, and number of donors needed in the population/year and births by false paternity. In Spain, the number of inadvertent unions between descendants of the same donor in Spain has been estimated at 0.4/year (one every two and a half years), although this frequency decreases as the reference population increases. On the other hand, the frequency of unions between family members due to false paternity has been estimated at 6.1/year. Thus, only 6% of such unions are due to the use of donor sperm. A total of 25 children per sperm donor are needed to align the probability of inadvertant consanguinity arising from the use of assisted reproduction with that due to false paternity. Therefore, we consider this number to be the maximum "reasonable" number of children born per donor in Spain.

  16. The development of the own-race advantage in school-age children: A morphing face paradigm

    PubMed Central

    Tai, Chu-Lik; Yang, Shu-Fei

    2018-01-01

    Previous studies examining the other-race effect in school-age children mostly focused on recognition memory performance. Here we investigated perceptual discriminability for Asian-like versus Caucasian-like morph faces in school-age Taiwanese children and adults. One-hundred-and-two 5- to 12-year-old children and twenty-three adults performed a sequential same/different face matching task, where they viewed an Asian- or a Caucasian-parent face followed by either the same parent face or a different morphed face (containing 15%, 30%, 45%, or 60% contribution from the other parent face) and judged if the two faces looked the same. We computed the d’ as the sensitivity index for each age groups. We also analyzed the group mean rejection rates as a function of the morph level and fitted with a cumulative normal distribution function. Results showed that the adults and the oldest 11-12-year-old children exhibited a greater sensitivity (d’) and a smaller discrimination threshold (μ) in the Asian-parent condition than those in the Caucasian-parent condition, indicating the presence of an own-race advantage. On the contrary, 5- to 10-year-old children showed an equal sensitivity and similar discrimination thresholds for both conditions, indicating an absence of the own-race advantage. Moreover, a gradual development in enhancing the discriminability for the Asian-parent condition was observed from age 5 to 12; however, the progression in the Caucasian-parent condition was less apparent. In sum, our findings suggest that expertise in face processing may take the entire childhood to develop, and supports the perceptual learning view of the other-race effect—the own-race advantage seen in adulthood likely reflects a result of prolonged learning specific to faces most commonly seen in one’s visual environment such as own-race faces. PMID:29634731

  17. Taking Care of Your Hair

    MedlinePlus

    ... Educators Search English Español Taking Care of Your Hair KidsHealth / For Teens / Taking Care of Your Hair ... role in how healthy it looks. Caring for Hair How you take care of your hair depends ...

  18. Taking Care of Your Teeth

    MedlinePlus

    ... Educators Search English Español Taking Care of Your Teeth KidsHealth / For Kids / Taking Care of Your Teeth ... they help you look your best. Why Healthy Teeth Are Important How does taking care of your ...

  19. Seeking the competitive advantage: it's more than cost reduction.

    PubMed

    South, S F

    1999-01-01

    Most organizations focus considerable time and energy on reducing operating costs as a way to attain marketplace advantage. This strategy was not inappropriate in the past. To be competitive in the future, however, focus must be placed on other issues, not just cost reduction. The near future will be dominated by service industries, knowledge management, and virtual partnerships, with production optimization and flexibility, innovation, and strong partnerships defining those organizations that attain competitive advantage. Competitive advantage will reside in clarifying the vision and strategic plan, reviewing and redesigning work processes to optimize resources and value-added work, and creating change-ready environments and empowered workforces.

  20. Reasoning about Other People's Beliefs: Bilinguals Have an Advantage

    ERIC Educational Resources Information Center

    Rubio-Fernandez, Paula; Glucksberg, Sam

    2012-01-01

    Bilingualism can have widespread cognitive effects. In this article we investigate whether bilingualism might have an effect on adults' abilities to reason about other people's beliefs. In particular, we tested whether bilingual adults might have an advantage over monolingual adults in false-belief reasoning analogous to the advantage that has…

  1. Estimation of typhoon rainfall in GaoPing River: A Multivariate Maximum Entropy Method

    NASA Astrophysics Data System (ADS)

    Pei-Jui, Wu; Hwa-Lung, Yu

    2016-04-01

    The heavy rainfall from typhoons is the main factor of the natural disaster in Taiwan, which causes the significant loss of human lives and properties. Statistically average 3.5 typhoons invade Taiwan every year, and the serious typhoon, Morakot in 2009, impacted Taiwan in recorded history. Because the duration, path and intensity of typhoon, also affect the temporal and spatial rainfall type in specific region , finding the characteristics of the typhoon rainfall type is advantageous when we try to estimate the quantity of rainfall. This study developed a rainfall prediction model and can be divided three parts. First, using the EEOF(extended empirical orthogonal function) to classify the typhoon events, and decompose the standard rainfall type of all stations of each typhoon event into the EOF and PC(principal component). So we can classify the typhoon events which vary similarly in temporally and spatially as the similar typhoon types. Next, according to the classification above, we construct the PDF(probability density function) in different space and time by means of using the multivariate maximum entropy from the first to forth moment statistically. Therefore, we can get the probability of each stations of each time. Final we use the BME(Bayesian Maximum Entropy method) to construct the typhoon rainfall prediction model , and to estimate the rainfall for the case of GaoPing river which located in south of Taiwan.This study could be useful for typhoon rainfall predictions in future and suitable to government for the typhoon disaster prevention .

  2. Taking multiple medicines safely

    MedlinePlus

    ... medlineplus.gov/ency/patientinstructions/000883.htm Taking multiple medicines safely To use the sharing features on this ... directed. Why You May Need More Than One Medicine You may take more than one medicine to ...

  3. When to use your head and when to use your heart: the differential value of perspective-taking versus empathy in competitive interactions.

    PubMed

    Gilin, Debra; Maddux, William W; Carpenter, Jordan; Galinsky, Adam D

    2013-01-01

    Four studies explored whether perspective-taking and empathy would be differentially effective in mixed-motive competitions depending on whether the critical skills for success were more cognitively or emotionally based. Study 1 demonstrated that individual differences in perspective-taking, but not empathy, predicted increased distributive and integrative performance in a multiple-round war game that required a clear understanding of an opponent's strategic intentions. Conversely, both measures and manipulations of empathy proved more advantageous than perspective-taking in a relationship-based coalition game that required identifying the strength of interpersonal connections (Studies 2-3). Study 4 established a key process: perspective-takers were more accurate in cognitive understanding of others, whereas empathy produced stronger accuracy in emotional understanding. Perspective-taking and empathy were each useful but in different types of competitive, mixed-motive situations-their success depended on the task-competency match. These results demonstrate when to use your head versus your heart to achieve the best outcomes for oneself.

  4. Improved relocatable over-the-horizon radar detection and tracking using the maximum likelihood adaptive neural system algorithm

    NASA Astrophysics Data System (ADS)

    Perlovsky, Leonid I.; Webb, Virgil H.; Bradley, Scott R.; Hansen, Christopher A.

    1998-07-01

    An advanced detection and tracking system is being developed for the U.S. Navy's Relocatable Over-the-Horizon Radar (ROTHR) to provide improved tracking performance against small aircraft typically used in drug-smuggling activities. The development is based on the Maximum Likelihood Adaptive Neural System (MLANS), a model-based neural network that combines advantages of neural network and model-based algorithmic approaches. The objective of the MLANS tracker development effort is to address user requirements for increased detection and tracking capability in clutter and improved track position, heading, and speed accuracy. The MLANS tracker is expected to outperform other approaches to detection and tracking for the following reasons. It incorporates adaptive internal models of target return signals, target tracks and maneuvers, and clutter signals, which leads to concurrent clutter suppression, detection, and tracking (track-before-detect). It is not combinatorial and thus does not require any thresholding or peak picking and can track in low signal-to-noise conditions. It incorporates superresolution spectrum estimation techniques exceeding the performance of conventional maximum likelihood and maximum entropy methods. The unique spectrum estimation method is based on the Einsteinian interpretation of the ROTHR received energy spectrum as a probability density of signal frequency. The MLANS neural architecture and learning mechanism are founded on spectrum models and maximization of the "Einsteinian" likelihood, allowing knowledge of the physical behavior of both targets and clutter to be injected into the tracker algorithms. The paper describes the addressed requirements and expected improvements, theoretical foundations, engineering methodology, and results of the development effort to date.

  5. A Longitudinal Study of Memory Advantages in Bilinguals

    PubMed Central

    Ljungberg, Jessica K.; Hansson, Patrik; Andrés, Pilar; Josefsson, Maria; Nilsson, Lars-Göran

    2013-01-01

    Typically, studies of cognitive advantages in bilinguals have been conducted previously by using executive and inhibitory tasks (e.g. Simon task) and applying cross-sectional designs. This study longitudinally investigated bilingual advantages on episodic memory recall, verbal letter and categorical fluency during the trajectory of life. Monolingual and bilingual participants (n = 178) between 35–70 years at baseline were drawn from the Betula Prospective Cohort Study of aging, memory, and health. Results showed that bilinguals outperformed monolinguals at the first testing session and across time both in episodic memory recall and in letter fluency. No interaction with age was found indicating that the rate of change across ages was similar for bilinguals and monolinguals. As predicted and in line with studies applying cross-sectional designs, no advantages associated with bilingualism were found in the categorical fluency task. The results are discussed in the light of successful aging. PMID:24023803

  6. Benchmarking for maximum value.

    PubMed

    Baldwin, Ed

    2009-03-01

    Speaking at the most recent Healthcare Estates conference, Ed Baldwin, of international built asset consultancy EC Harris LLP, examined the role of benchmarking and market-testing--two of the key methods used to evaluate the quality and cost-effectiveness of hard and soft FM services provided under PFI healthcare schemes to ensure they are offering maximum value for money.

  7. Electrophysiological explorations of the bilingual advantage: evidence from a Stroop task.

    PubMed

    Coderre, Emily L; van Heuven, Walter J B

    2014-01-01

    Bilinguals have been shown to exhibit a performance advantage on executive control tasks, outperforming their monolingual counterparts. Although a wealth of research has investigated this 'bilingual advantage' behaviourally, electrophysiological correlates are lacking. Using EEG with a Stroop task that manipulated the stimulus onset asynchrony (SOA) of word and colour presentation, the current study addressed two facets of the bilingual advantage. The possibility that bilinguals experience superior conflict processing relative to monolinguals (a 'conflict-specific advantage') was investigated by comparing behavioural interference effects as well as the amplitude of the Ninc, a conflict-related ERP component occurring from approximately 300-500 ms after the onset of conflict. In contrast, the hypothesis that bilinguals experience domain-general, conflict-independent enhancements in executive processing (a 'non-conflict-specific advantage') was evaluated by comparing the control condition (symbol strings) between groups. There was some significant, but inconsistent, evidence for a conflict-specific bilingual advantage. In contrast, strong evidence emerged for a non-conflict-specific advantage, with bilinguals demonstrating faster RTs and reduced ERP amplitudes on control trials compared to monolinguals. Importantly, when the control stimulus was presented before the colour, ERPs to control trials revealed group differences before the onset of conflict, suggesting differences in the ability to ignore or suppress distracting irrelevant information. This indicates that bilinguals experience superior executive processing even in the absence of conflict and semantic salience, and suggests that the advantage extends to more efficient proactive management of the environment.

  8. 46 CFR 151.03-37 - Maximum allowable working pressure.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 5 2013-10-01 2013-10-01 false Maximum allowable working pressure. 151.03-37 Section 151.03-37 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-37 Maximum allowable working pressure. The maximum allowable working...

  9. 46 CFR 151.03-37 - Maximum allowable working pressure.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 5 2012-10-01 2012-10-01 false Maximum allowable working pressure. 151.03-37 Section 151.03-37 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-37 Maximum allowable working pressure. The maximum allowable working...

  10. 46 CFR 151.03-37 - Maximum allowable working pressure.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 5 2011-10-01 2011-10-01 false Maximum allowable working pressure. 151.03-37 Section 151.03-37 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-37 Maximum allowable working pressure. The maximum allowable working...

  11. 46 CFR 151.03-37 - Maximum allowable working pressure.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Maximum allowable working pressure. 151.03-37 Section 151.03-37 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-37 Maximum allowable working pressure. The maximum allowable working...

  12. 46 CFR 151.03-37 - Maximum allowable working pressure.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 46 Shipping 5 2014-10-01 2014-10-01 false Maximum allowable working pressure. 151.03-37 Section 151.03-37 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES BARGES CARRYING BULK LIQUID HAZARDOUS MATERIAL CARGOES Definitions § 151.03-37 Maximum allowable working pressure. The maximum allowable working...

  13. Advantages and limitations of classic and 3D QSAR approaches in nano-QSAR studies based on biological activity of fullerene derivatives

    DOE PAGES

    Jagiello, Karolina; Grzonkowska, Monika; Swirog, Marta; ...

    2016-08-29

    In this contribution, the advantages and limitations of two computational techniques that can be used for the investigation of nanoparticles activity and toxicity: classic nano-QSAR (Quantitative Structure–Activity Relationships employed for nanomaterials) and 3D nano-QSAR (three-dimensional Quantitative Structure–Activity Relationships, such us Comparative Molecular Field Analysis, CoMFA/Comparative Molecular Similarity Indices Analysis, CoMSIA analysis employed for nanomaterials) have been briefly summarized. Both approaches were compared according to the selected criteria, including: efficiency, type of experimental data, class of nanomaterials, time required for calculations and computational cost, difficulties in the interpretation. Taking into account the advantages and limitations of each method, we provide themore » recommendations for nano-QSAR modellers and QSAR model users to be able to determine a proper and efficient methodology to investigate biological activity of nanoparticles in order to describe the underlying interactions in the most reliable and useful manner.« less

  14. Advantages and limitations of classic and 3D QSAR approaches in nano-QSAR studies based on biological activity of fullerene derivatives

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jagiello, Karolina; Grzonkowska, Monika; Swirog, Marta

    In this contribution, the advantages and limitations of two computational techniques that can be used for the investigation of nanoparticles activity and toxicity: classic nano-QSAR (Quantitative Structure–Activity Relationships employed for nanomaterials) and 3D nano-QSAR (three-dimensional Quantitative Structure–Activity Relationships, such us Comparative Molecular Field Analysis, CoMFA/Comparative Molecular Similarity Indices Analysis, CoMSIA analysis employed for nanomaterials) have been briefly summarized. Both approaches were compared according to the selected criteria, including: efficiency, type of experimental data, class of nanomaterials, time required for calculations and computational cost, difficulties in the interpretation. Taking into account the advantages and limitations of each method, we provide themore » recommendations for nano-QSAR modellers and QSAR model users to be able to determine a proper and efficient methodology to investigate biological activity of nanoparticles in order to describe the underlying interactions in the most reliable and useful manner.« less

  15. Maximum saliency bias in binocular fusion

    NASA Astrophysics Data System (ADS)

    Lu, Yuhao; Stafford, Tom; Fox, Charles

    2016-07-01

    Subjective experience at any instant consists of a single ("unitary"), coherent interpretation of sense data rather than a "Bayesian blur" of alternatives. However, computation of Bayes-optimal actions has no role for unitary perception, instead being required to integrate over every possible action-percept pair to maximise expected utility. So what is the role of unitary coherent percepts, and how are they computed? Recent work provided objective evidence for non-Bayes-optimal, unitary coherent, perception and action in humans; and further suggested that the percept selected is not the maximum a posteriori percept but is instead affected by utility. The present study uses a binocular fusion task first to reproduce the same effect in a new domain, and second, to test multiple hypotheses about exactly how utility may affect the percept. After accounting for high experimental noise, it finds that both Bayes optimality (maximise expected utility) and the previously proposed maximum-utility hypothesis are outperformed in fitting the data by a modified maximum-salience hypothesis, using unsigned utility magnitudes in place of signed utilities in the bias function.

  16. Maximum magnitude earthquakes induced by fluid injection

    USGS Publications Warehouse

    McGarr, Arthur F.

    2014-01-01

    Analysis of numerous case histories of earthquake sequences induced by fluid injection at depth reveals that the maximum magnitude appears to be limited according to the total volume of fluid injected. Similarly, the maximum seismic moment seems to have an upper bound proportional to the total volume of injected fluid. Activities involving fluid injection include (1) hydraulic fracturing of shale formations or coal seams to extract gas and oil, (2) disposal of wastewater from these gas and oil activities by injection into deep aquifers, and (3) the development of enhanced geothermal systems by injecting water into hot, low-permeability rock. Of these three operations, wastewater disposal is observed to be associated with the largest earthquakes, with maximum magnitudes sometimes exceeding 5. To estimate the maximum earthquake that could be induced by a given fluid injection project, the rock mass is assumed to be fully saturated, brittle, to respond to injection with a sequence of earthquakes localized to the region weakened by the pore pressure increase of the injection operation and to have a Gutenberg-Richter magnitude distribution with a b value of 1. If these assumptions correctly describe the circumstances of the largest earthquake, then the maximum seismic moment is limited to the volume of injected liquid times the modulus of rigidity. Observations from the available case histories of earthquakes induced by fluid injection are consistent with this bound on seismic moment. In view of the uncertainties in this analysis, however, this should not be regarded as an absolute physical limit.

  17. Academic Benefits of On-Campus Employment to First-Year Developmental Education Students.

    ERIC Educational Resources Information Center

    Wilkie, Carolyn; Jones, Marquita

    1994-01-01

    A study of 1,012 college freshmen admitted through a developmental studies program and offered employment through a highly structured program of up to 8 work hours/week found those taking maximum advantage of the work opportunity had higher achievement and retention rates than others. Differences by race and gender, and student perceptions, are…

  18. A maximum likelihood map of chromosome 1.

    PubMed Central

    Rao, D C; Keats, B J; Lalouel, J M; Morton, N E; Yee, S

    1979-01-01

    Thirteen loci are mapped on chromosome 1 from genetic evidence. The maximum likelihood map presented permits confirmation that Scianna (SC) and a fourteenth locus, phenylketonuria (PKU), are on chromosome 1, although the location of the latter on the PGM1-AMY segment is uncertain. Eight other controversial genetic assignments are rejected, providing a practical demonstration of the resolution which maximum likelihood theory brings to mapping. PMID:293128

  19. 75 FR 7383 - Taking of Marine Mammals Incidental to Commercial Fishing Operations; Harbor Porpoise Take...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-19

    .... 080721862-8864-01] RIN 0648-AW51 Taking of Marine Mammals Incidental to Commercial Fishing Operations; Harbor Porpoise Take Reduction Plan Regulations AGENCY: National Marine Fisheries Service (NMFS... this final rule to amend the regulations implementing the Harbor Porpoise Take Reduction Plan (HPTRP...

  20. 40 CFR 143.3 - Secondary maximum contaminant levels.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    .... 143.3 Section 143.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL SECONDARY DRINKING WATER REGULATIONS § 143.3 Secondary maximum contaminant levels. The secondary maximum contaminant levels for public water systems are as follows: Contaminant...

  1. 40 CFR 143.3 - Secondary maximum contaminant levels.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... 143.3 Section 143.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL SECONDARY DRINKING WATER REGULATIONS § 143.3 Secondary maximum contaminant levels. The secondary maximum contaminant levels for public water systems are as follows: Contaminant...

  2. 40 CFR 143.3 - Secondary maximum contaminant levels.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    .... 143.3 Section 143.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL SECONDARY DRINKING WATER REGULATIONS § 143.3 Secondary maximum contaminant levels. The secondary maximum contaminant levels for public water systems are as follows: Contaminant...

  3. 40 CFR 143.3 - Secondary maximum contaminant levels.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    .... 143.3 Section 143.3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS (CONTINUED) NATIONAL SECONDARY DRINKING WATER REGULATIONS § 143.3 Secondary maximum contaminant levels. The secondary maximum contaminant levels for public water systems are as follows: Contaminant...

  4. Gene Regulatory Network Inferences Using a Maximum-Relevance and Maximum-Significance Strategy

    PubMed Central

    Liu, Wei; Zhu, Wen; Liao, Bo; Chen, Xiangtao

    2016-01-01

    Recovering gene regulatory networks from expression data is a challenging problem in systems biology that provides valuable information on the regulatory mechanisms of cells. A number of algorithms based on computational models are currently used to recover network topology. However, most of these algorithms have limitations. For example, many models tend to be complicated because of the “large p, small n” problem. In this paper, we propose a novel regulatory network inference method called the maximum-relevance and maximum-significance network (MRMSn) method, which converts the problem of recovering networks into a problem of how to select the regulator genes for each gene. To solve the latter problem, we present an algorithm that is based on information theory and selects the regulator genes for a specific gene by maximizing the relevance and significance. A first-order incremental search algorithm is used to search for regulator genes. Eventually, a strict constraint is adopted to adjust all of the regulatory relationships according to the obtained regulator genes and thus obtain the complete network structure. We performed our method on five different datasets and compared our method to five state-of-the-art methods for network inference based on information theory. The results confirm the effectiveness of our method. PMID:27829000

  5. Fourier Transform Infrared Spectroscopy: Part II. Advantages of FT-IR.

    ERIC Educational Resources Information Center

    Perkins, W. D.

    1987-01-01

    This is Part II in a series on Fourier transform infrared spectroscopy (FT-IR). Described are various advantages of FT-IR spectroscopy including energy advantages, wavenumber accuracy, constant resolution, polarization effects, and stepping at grating changes. (RH)

  6. The Advantages, Potentials and Safety of VTOL Suborbital Space Tourism Operations

    NASA Astrophysics Data System (ADS)

    Ridzuan Zakaria, N.; Nasrun, N.; Abu, J.; Jusoh, A.; Azim, L.; Said, A.; Ishak, S.; Rafidi Zakaria, N.

    2012-01-01

    more risky for a suborbital vehicle to fly above such objects after taking off from a spaceport far away from the object, and later returning to the spaceport, the way to go is to have the operation of the suborbital vehicle near the exotic locations. Unfortunately, some exotic locations such as a tropical archipelago in the middle of a clear blue ocean or a permanent icecap on a mountain range with variety of vegetation around it due to differences in height may not have suitable runway to function as spaceport, and for such reason, VTOL (vertical take-off and landing) capability for suborbital tourism vehicle may be worth considered. VTOL suborbital space tourism vehicle may not operate from a remote uneconomical location even though the location is near an exotic viewing target, but such vehicle may operate from a luxury super yacht that can sail to exotic locations around the world, and during the journey, the passengers can be trained and prepared for the flight of their life. Such is an advantage and potential of VTOL suborbital space tourism vehicle, but VTOL operation can be more complex than a conventional operation and therefore will increase the risk of operation, and for this reason the safety issue for such operation is very significant. This paper explores and discusses some advantages and potentials of VTOL suborbital space tourism operations and safety issues related to them. It also describes a couple of proposed concepts of VTOL suborbital tourism vehicles and potential exotic locations on Earth to be viewed from such vehicles.

  7. Demonstration of quantum advantage in machine learning

    NASA Astrophysics Data System (ADS)

    Ristè, Diego; da Silva, Marcus P.; Ryan, Colm A.; Cross, Andrew W.; Córcoles, Antonio D.; Smolin, John A.; Gambetta, Jay M.; Chow, Jerry M.; Johnson, Blake R.

    2017-04-01

    The main promise of quantum computing is to efficiently solve certain problems that are prohibitively expensive for a classical computer. Most problems with a proven quantum advantage involve the repeated use of a black box, or oracle, whose structure encodes the solution. One measure of the algorithmic performance is the query complexity, i.e., the scaling of the number of oracle calls needed to find the solution with a given probability. Few-qubit demonstrations of quantum algorithms, such as Deutsch-Jozsa and Grover, have been implemented across diverse physical systems such as nuclear magnetic resonance, trapped ions, optical systems, and superconducting circuits. However, at the small scale, these problems can already be solved classically with a few oracle queries, limiting the obtained advantage. Here we solve an oracle-based problem, known as learning parity with noise, on a five-qubit superconducting processor. Executing classical and quantum algorithms using the same oracle, we observe a large gap in query count in favor of quantum processing. We find that this gap grows by orders of magnitude as a function of the error rates and the problem size. This result demonstrates that, while complex fault-tolerant architectures will be required for universal quantum computing, a significant quantum advantage already emerges in existing noisy systems.

  8. 38 CFR 8a.2 - Maximum amount of insurance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) The maximum amount of insurance in force on any one life at one time shall not exceed the lesser of... MORTGAGE LIFE INSURANCE § 8a.2 Maximum amount of insurance. (a) Each eligible veteran is authorized up to a maximum of $90,000 in VMLI to insure his or her life during periods he or she is obligated under a...

  9. 38 CFR 8a.2 - Maximum amount of insurance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...) The maximum amount of insurance in force on any one life at one time shall not exceed the lesser of... MORTGAGE LIFE INSURANCE § 8a.2 Maximum amount of insurance. (a) Each eligible veteran is authorized up to a maximum of $90,000 in VMLI to insure his or her life during periods he or she is obligated under a...

  10. High- and Low-Order Overtaking-Ability Affordances: Drivers Rely on the Maximum Velocity and Acceleration of Their Cars to Perform Overtaking Maneuvers.

    PubMed

    Basilio, Numa; Morice, Antoine H P; Marti, Geoffrey; Montagne, Gilles

    2015-08-01

    The aim of this study was to answer the question, Do drivers take into account the action boundaries of their car when overtaking? The Morice et al. affordance-based approach to visually guided overtaking suggests that the "overtake-ability" affordance can be formalized as the ratio of the "minimum satisfying velocity" (MSV) of the maneuver to the maximum velocity (V(max)) of the driven car. In this definition, however, the maximum acceleration (A(max)) of the vehicle is ignored. We hypothesize that drivers may be sensitive to an affordance redefined with the ratio of the "minimum satisfying acceleration" (MSA) to the A(max) of the car. Two groups of nine drivers drove cars differing in their A(max). They were instructed to attempt overtaking maneuvers in 25 situations resulting from the combination of five MSA and five MSV values. When overtaking frequency was expressed as a function of MSV and MSA, maneuvers were found to be initiated differently for the two groups. However, when expressed as a function of MSV/V(max) and MSA/A(max), overtaking frequency was quite similar for both groups. Finally, a multiple regression coefficient analysis demonstrated that overtaking decisions are fully explained by a composite variable comprising MSA/A(max) and the time required to reach MSV. Drivers reliably decide whether overtaking is safe (or not) by using low- and high-order variables taking into account their car's maximum velocity and acceleration, respectively, as predicted by "affordance-based control" theory. Potential applications include the design of overtaking assistance, which should exploit the MSA/A(max) variables in order to suggest perceptually relevant overtaking solutions. © 2015, Human Factors and Ergonomics Society.

  11. Advantages of thin silicon solar cells for use in space

    NASA Technical Reports Server (NTRS)

    Denman, O. S.

    1978-01-01

    A system definition study on the Solar Power Satellite System showed that a thin, 50 micrometers, silicon solar cell has significant advantages. The advantages include a significantly lower performance degradation in a radiation environment and high power-to-mass ratios. The advantages of such cells for an employment in space is further investigated. Basic questions concerning the operation of solar cells are considered along with aspects of radiation induced performance degradation. The question arose in this connection how thin a silicon solar cell had to be to achieve resistance to radiation degradation and still have good initial performance. It was found that single-crystal silicon solar cells could be as thin as 50 micrometers and still develop high conversion efficiencies. It is concluded that the use of 50 micrometer silicon solar cells in space-based photovoltaic power systems would be advantageous.

  12. Testosterone, territoriality, and the 'home advantage'.

    PubMed

    Neave, Nick; Wolfson, Sandy

    2003-02-01

    The consistently better performance seen by teams in various sporting contexts when playing at home is referred to as the 'home advantage'. Various explanations have been put forward to account for this robust phenomenon, though none has yet focussed on possible hormonal factors. In an initial study, we showed that salivary testosterone levels in soccer players were significantly higher before a home game than an away game.In a second study involving a different group of soccer players, this finding was replicated over two home games, two away games, and three training sessions. Perceived rivalry of the opposing team was important as testosterone levels were higher before playing an 'extreme' rival than a 'moderate' rival. Self-reported measures of mood in both studies were not linked to testosterone level. The present results corroborate and extend earlier findings on the relationships between testosterone, territoriality, and dominance in human competitive encounters and further suggest an important role for testosterone in the home advantage seen in various team sports.

  13. 77 FR 66587 - Taking and Importing Marine Mammals; Taking Marine Mammals Incidental to Missile Launch...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-11-06

    ... years if NMFS finds, after notification and opportunity for public comment, that the taking will have a... taking. Regulations governing the taking of northern elephant seals (Mirounga angustirostris), Pacific... specify ``annual'' LOAs; therefore, NMFS can only issue an LOA not to exceed a one-year period. Summary of...

  14. 20 CFR 615.7 - Extended Benefits; maximum amount.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 20 Employees' Benefits 3 2014-04-01 2014-04-01 false Extended Benefits; maximum amount. 615.7 Section 615.7 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR EXTENDED BENEFITS IN THE FEDERAL-STATE UNEMPLOYMENT COMPENSATION PROGRAM § 615.7 Extended Benefits; maximum amount...

  15. 20 CFR 615.7 - Extended Benefits; maximum amount.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 20 Employees' Benefits 3 2013-04-01 2013-04-01 false Extended Benefits; maximum amount. 615.7 Section 615.7 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR EXTENDED BENEFITS IN THE FEDERAL-STATE UNEMPLOYMENT COMPENSATION PROGRAM § 615.7 Extended Benefits; maximum amount...

  16. 20 CFR 615.7 - Extended Benefits; maximum amount.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 20 Employees' Benefits 3 2012-04-01 2012-04-01 false Extended Benefits; maximum amount. 615.7 Section 615.7 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR EXTENDED BENEFITS IN THE FEDERAL-STATE UNEMPLOYMENT COMPENSATION PROGRAM § 615.7 Extended Benefits; maximum amount...

  17. 20 CFR 615.7 - Extended Benefits; maximum amount.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Extended Benefits; maximum amount. 615.7 Section 615.7 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR EXTENDED BENEFITS IN THE FEDERAL-STATE UNEMPLOYMENT COMPENSATION PROGRAM § 615.7 Extended Benefits; maximum amount...

  18. 20 CFR 615.7 - Extended Benefits; maximum amount.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Extended Benefits; maximum amount. 615.7 Section 615.7 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR EXTENDED BENEFITS IN THE FEDERAL-STATE UNEMPLOYMENT COMPENSATION PROGRAM § 615.7 Extended Benefits; maximum amount...

  19. 48 CFR 32.503-12 - Maximum unliquidated amount.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Maximum unliquidated amount. 32.503-12 Section 32.503-12 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Progress Payments Based on Costs 32.503-12 Maximum...

  20. 49 CFR 209.103 - Minimum and maximum penalties.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Minimum and maximum penalties. 209.103 Section 209... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD SAFETY ENFORCEMENT PROCEDURES Hazardous Materials Penalties Civil Penalties § 209.103 Minimum and maximum penalties. (a) A person who knowingly violates a...