Sample records for talis gaitnieks andrejs

  1. Teaching and Learning International Survey TALIS 2013: Conceptual Framework. Final

    ERIC Educational Resources Information Center

    Rutkowski, David; Rutkowski, Leslie; Bélanger, Julie; Knoll, Steffen; Weatherby, Kristen; Prusinski, Ellen

    2013-01-01

    In 2008, the initial cycle of the OECD's Teaching and Learning International Survey (TALIS 2008) established, for the first time, an international, large-scale survey of the teaching workforce, the conditions of teaching, and the learning environments of schools in participating countries. The second cycle of TALIS (TALIS 2013) aims to continue…

  2. School Leadership for Learning: Insights from TALIS 2013

    ERIC Educational Resources Information Center

    OECD Publishing, 2016

    2016-01-01

    The OECD Teaching and Learning International Survey (TALIS) is the largest international survey of teachers and school leaders. Using the TALIS database, this report looks at different approaches to school leadership and the impact of school leadership on professional learning communities and on the learning climate in individual schools. It looks…

  3. TALIS 2013 Technical Report: Teaching and Learning International Survey

    ERIC Educational Resources Information Center

    OECD Publishing, 2013

    2013-01-01

    Effective teaching and teachers are key to producing high-performing students worldwide. So how can countries prepare teachers to face the diverse challenges in today's schools? The Teaching and Learning International Survey (TALIS) helps answer this question. TALIS asks teachers and schools about their working conditions and the learning…

  4. Teaching and Learning International Survey (TALIS) 2013: U.S. Technical Report. NCES 2015-010

    ERIC Educational Resources Information Center

    Strizek, Gregory A.; Tourkin, Steve; Erberber, Ebru

    2014-01-01

    This technical report is designed to provide researchers with an overview of the design and implementation of the Teaching and Learning International Survey (TALIS) 2013. This information is meant to supplement that presented in OECD publications by describing those aspects of TALIS 2013 that are unique to the United States. Chapter 2 provides…

  5. Supporting Teacher Professionalism: Insights from TALIS 2013

    ERIC Educational Resources Information Center

    OECD Publishing, 2016

    2016-01-01

    This report examines the nature and extent of support for teacher professionalism using the Teaching and Learning International Survey (TALIS) 2013, a survey of teachers and principals in 34 countries and economies around the world. Teacher professionalism is defined as the knowledge, skills, and practices that teachers must have in order to be…

  6. Morphology of sustentaculum tali: Biomechanical importance and correlation with angular dimensions of the talus.

    PubMed

    Mahato, Niladri Kumar

    2011-12-01

    The talus and the calcaneus share the bulk of load transmitted from the leg to the skeleton of the foot. The present study analyses the inter-relationship between the superior articular surface and the angular dimensions of the talus with the morphology of the sustentaculum tali. Identification of possible relationships between different angular parameters of the talus morphology and the sustentaculum tali in context of load transmission through the foot. One articular surface and three angular parameters at the junction of the head and the body were measured from dried human talar bones. Corresponding calcaneal samples were measured for four dimensions at the sustentaculum tali. Correlation and regression statistical values between parameters were worked out and analysed. Several parameters within the talus demonstrated significant correlations amongst themselves. The neck vertical angle showed a strong correlation with the articulating surface area below the head of the talus. The inter-relationship between articular and angular parameters within the talus demonstrates strong correlation for certain parameters. Data presented in the study may be helpful to adjust calcaneal and talar screw placement techniques, prosthesis designing and bio-mechanical studies at this important region. Copyright © 2011 Elsevier Ltd. All rights reserved.

  7. TANGO1 and Mia2/cTAGE5 (TALI) cooperate to export bulky pre-chylomicrons/VLDLs from the endoplasmic reticulum.

    PubMed

    Santos, António J M; Nogueira, Cristina; Ortega-Bellido, Maria; Malhotra, Vivek

    2016-05-09

    Procollagens, pre-chylomicrons, and pre-very low-density lipoproteins (pre-VLDLs) are too big to fit into conventional COPII-coated vesicles, so how are these bulky cargoes exported from the endoplasmic reticulum (ER)? We have shown that TANGO1 located at the ER exit site is necessary for procollagen export. We report a role for TANGO1 and TANGO1-like (TALI), a chimeric protein resulting from fusion of MIA2 and cTAGE5 gene products, in the export of pre-chylomicrons and pre-VLDLs from the ER. TANGO1 binds TALI, and both interact with apolipoprotein B (ApoB) and are necessary for the recruitment of ApoB-containing lipid particles to ER exit sites for their subsequent export. Although export of ApoB requires the function of both TANGO1 and TALI, the export of procollagen XII by the same cells requires only TANGO1. These findings reveal a general role for TANGO1 in the export of bulky cargoes from the ER and identify a specific requirement for TALI in assisting TANGO1 to export bulky lipid particles. © 2016 Santos et al.

  8. TALYS/TENDL verification and validation processes: Outcomes and recommendations

    NASA Astrophysics Data System (ADS)

    Fleming, Michael; Sublet, Jean-Christophe; Gilbert, Mark R.; Koning, Arjan; Rochman, Dimitri

    2017-09-01

    The TALYS-generated Evaluated Nuclear Data Libraries (TENDL) provide truly general-purpose nuclear data files assembled from the outputs of the T6 nuclear model codes system for direct use in both basic physics and engineering applications. The most recent TENDL-2015 version is based on both default and adjusted parameters of the most recent TALYS, TAFIS, TANES, TARES, TEFAL, TASMAN codes wrapped into a Total Monte Carlo loop for uncertainty quantification. TENDL-2015 contains complete neutron-incident evaluations for all target nuclides with Z ≤116 with half-life longer than 1 second (2809 isotopes with 544 isomeric states), up to 200 MeV, with covariances and all reaction daughter products including isomers of half-life greater than 100 milliseconds. With the added High Fidelity Resonance (HFR) approach, all resonances are unique, following statistical rules. The validation of the TENDL-2014/2015 libraries against standard, evaluated, microscopic and integral cross sections has been performed against a newly compiled UKAEA database of thermal, resonance integral, Maxwellian averages, 14 MeV and various accelerator-driven neutron source spectra. This has been assembled using the most up-to-date, internationally-recognised data sources including the Atlas of Resonances, CRC, evaluated EXFOR, activation databases, fusion, fission and MACS. Excellent agreement was found with a small set of errors within the reference databases and TENDL-2014 predictions.

  9. Reliability and Structure of the TALIS Social Desirability Scale: An Assessment Based on Item Response Theory

    ERIC Educational Resources Information Center

    Kapuza, A. V.; Tyumeneva, Yu. A.

    2017-01-01

    One of the ways of controlling for the influence of social expectations on the answers given by survey respondents is to use a social desirability scale together with the main questions. The social desirability scale, which was included in the Teaching and Learning International Survey (TALIS) international comparative study for this purpose, was…

  10. What Did We Learn about Our Teachers and Principals? Results of the TALIS-2013 International Comparative Study

    ERIC Educational Resources Information Center

    Pinskaya, M. A.; Lenskaya, E. A.; Ponomareva, A. A.; Brun, I. V.; Kosaretsky, S. G.; Savelyeva, M. B.

    2016-01-01

    The Teaching and Learning International Survey (TALIS) is a large-scale and authoritative international study of teachers. It is conducted by the Organization for Economic Cooperation and Development (OECD) to collect and compare information about teachers and principals in different countries in such key areas as the training and professional…

  11. Between Ritual and Spiritual: Teachers' Perceptions and Practices Regarding Prayer Education in TALI Day Schools in Israel

    ERIC Educational Resources Information Center

    Muszkat-Barkan, Michal

    2015-01-01

    The aim of this qualitative study is to describe teachers' perceptions and roles in prayer education in TALI day schools in Israel, using in-depth oral Interviews, written questionnaires and written materials of the schools' network. Two educational ideologies were identified: Belonging to the Jewish collective and Personal-spiritual ideology.…

  12. A Comparative Study on the Teaching Profession in Turkey and South Korea: Secondary Analysis of TALIS 2008 Data in Relation to Teacher Self-Efficacy

    ERIC Educational Resources Information Center

    Aslan, Berna

    2015-01-01

    Problem Statement: Teacher self-efficacy is important factor for school and student success. This study investigates the variables that explain teacher self-efficacy in Turkey and South Korea according to TALIS 2008 data. A detailed comparison was conducted and the state of the teaching profession in both countries is discussed. Purpose of the…

  13. The Social Networks of Small Arms Proliferation: Mapping an Aviation Enabled Supply Chain

    DTIC Science & Technology

    2007-12-01

    each of the discrete arms 248 Wouter de Nooy, Andrej Mrvar , and Vladimir Batagelj , Exploratory Social...303 Wouter de Nooy, Andrej Mrvar , and Vladimir Batagelj , Exploratory Social Network Analysis with Pajek, 101. 304 Ibid., 21. 93 entity. The data...305 Wouter de Nooy, Andrej Mrvar , and Vladimir Batagelj , Exploratory Social Network Analysis with Pajek, 101. 306 Linton C. Freeman, "Graphical

  14. 2D and 3D assessment of sustentaculum tali screw fixation with or without Screw Targeting Clamp.

    PubMed

    De Boer, A Siebe; Van Lieshout, Esther M M; Vellekoop, Leonie; Knops, Simon P; Kleinrensink, Gert-Jan; Verhofstad, Michael H J

    2017-12-01

    Precise placement of sustentaculum tali screw(s) is essential for restoring anatomy and biomechanical stability of the calcaneus. This can be challenging due to the small target area and presence of neurovascular structures on the medial side. The aim was to evaluate the precision of positioning of the subchondral posterior facet screw and processus anterior calcanei screw with or without a Screw Targeting Clamp. The secondary aim was to evaluate the added value of peroperative 3D imaging over 2D radiographs alone. Twenty Anubifix™ embalmed, human anatomic lower limb specimens were used. A subchondral posterior facet screw and a processus anterior calcanei screw were placed using an extended lateral approach. A senior orthopedic trauma surgeon experienced in calcaneal fracture surgery and a senior resident with limited experience in calcaneal surgery performed screw fixation in five specimens with and in five specimens without the clamp. 2D lateral and axial radiographs and a 3D recording were obtained postoperatively. Anatomical dissection was performed postoperatively as a diagnostic golden standard in order to obtain the factual screw positions. Blinded assessment of quality of fixation was performed by two surgeons. In 2D, eight screws were considered malpositioned when placed with the targeting device versus nine placed freehand. In 3D recordings, two additional screws were malpositioned in each group as compared to the golden standard. As opposed to the senior surgeon, the senior resident seemed to get the best results using the Screw Targeting Clamp (number of malpositioned screws using freehand was eight, and using the targeting clamp five). In nine out of 20 specimens 3D images provided additional information concerning target area and intra-articular placement. Based on the 3D assessment, five additional screws would have required repositioning. Except for one, all screw positions were rated equally after dissection when compared with 3D examinations

  15. Seminar Andrej Sacharov

    ScienceCinema

    None

    2017-12-09

    A l'occasion de son 63me anniversaire 2 orateurs rendent hommage à A.Sacharov, physicien russe et né à Moscou, pour ses accomplissements scientifiques et son courage. A.Sacharov a dénoncé les dangers de la radioactivité et a tenté de persuader les autorités soviétiques de supprimer une série de test après le developpement de la bombe atomique en 1949 et la bombe à hydrogène en 1953 par un groupe de chercheurs soviétiques. Il a obtenu le prix Nobel en 1975.

  16. A Theory of Dark Network Design

    DTIC Science & Technology

    2010-12-01

    Theoretical Framework for Analysis.” Master’s Thesis, Naval Postgraduate School, 1996 . de Nooy, Wouter, Andrej Mrvar , and Vladimir Batagelj ...understanding the nature of relationships in networks. Wouter de Nooy, Andrej Mrvar and Vladimir Batagelj , Exploratory Social Network Analysis with Pajek...34 RAND Corporation, 1996 , http://www.rand.org/pubs/monograph_reports/MR789/ (accessed November 5, 2009) and John Arquilla and David Ronfeldt

  17. Fighting Dark Networks: Using Social Network Analysis to Implement the Special Operations Targeting Process for Direct and Indirect Approaches

    DTIC Science & Technology

    2013-03-01

    Wouter De Nooy, Andrej Mrvar and Vladimir Batagelj , Exploratory Social Network Analysis with Pajek, (New York: Cambridge University Press, 2005), 5...Granovetter, “The Strength of Weak Ties,” 1350–1368. 151 de Nooy, Mrvar , and Batagelj , Exploratory Social Network Analysis with Pajek, 151. 152...Spacetime Wrinkles Exhibit (1995). de Nooy, Wouter, Andrej Mrvar , and Vladimir Batagelj . Exploratory Social Network Analysis with Pajek. Cambridge

  18. Intelligence Collection Targeting and Interdiction of Dark Networks

    DTIC Science & Technology

    2014-06-01

    2006): 346. 26 Wouter de Nooy, Andrej Mrvar , and Vladimir Batagelj . Exploratory Social Network Analysis with Pajek, 2nd ed. (Cambridge: Cambridge...Pittsburgh, PA: Carnegie Mellon University, 2013. de Nooy, Wouter, Andrej Mrvar , and Vladimir Batagelj . Exploratory Social Network Analysis with...al-Qaeda’s leaders had closely followed the April 1996 assassination of Dzhokhar Dudayev, the Chechen prime minister, who was killed by a Russian

  19. Study of components and statistical reaction mechanism in simulation of nuclear process for optimized production of 64Cu and 67Ga medical radioisotopes using TALYS, EMPIRE and LISE++ nuclear reaction and evaporation codes

    NASA Astrophysics Data System (ADS)

    Nasrabadi, M. N.; Sepiani, M.

    2015-03-01

    Production of medical radioisotopes is one of the most important tasks in the field of nuclear technology. These radioactive isotopes are mainly produced through variety nuclear process. In this research, excitation functions and nuclear reaction mechanisms are studied for simulation of production of these radioisotopes in the TALYS, EMPIRE & LISE++ reaction codes, then parameters and different models of nuclear level density as one of the most important components in statistical reaction models are adjusted for optimum production of desired radioactive yields.

  20. Study of components and statistical reaction mechanism in simulation of nuclear process for optimized production of {sup 64}Cu and {sup 67}Ga medical radioisotopes using TALYS, EMPIRE and LISE++ nuclear reaction and evaporation codes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Nasrabadi, M. N., E-mail: mnnasrabadi@ast.ui.ac.ir; Sepiani, M.

    2015-03-30

    Production of medical radioisotopes is one of the most important tasks in the field of nuclear technology. These radioactive isotopes are mainly produced through variety nuclear process. In this research, excitation functions and nuclear reaction mechanisms are studied for simulation of production of these radioisotopes in the TALYS, EMPIRE and LISE++ reaction codes, then parameters and different models of nuclear level density as one of the most important components in statistical reaction models are adjusted for optimum production of desired radioactive yields.

  1. Bruyères-le-Châtel Neutron Evaluations of Actinides with the TALYS Code: The Fission Channel

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Romain, P., E-mail: pascal.romain@cea.fr; Morillon, B.; Duarte, H.

    For several years, various neutron evaluations of plutonium and uranium isotopes have been performed at Bruyères-le-Châtel (BRC), from 1 keV up to 30 MeV. Since only nuclear reaction models have been used to produce these evaluations, our approach was named the “Full Model” approach. Total, shape elastic and direct inelastic cross sections were obtained from the coupled channels model using a dispersive optical potential developed for actinides, with a large enough coupling scheme including the lowest octupolar band. All other cross sections were calculated using the Hauser-Feshbach theory (TALYS code) with a pre-equilibrium component above 8–10 MeV. In this paper,more » we focus our attention on the fission channel. More precisely, we will present the BRC contribution to fission modeling and the philosophy adopted in our “Full Model” approach. Performing evaluations with the “Full Model” approach implies the optimization of a large number of model parameters. With increasing neutron incident energy, many residual nuclei produced by nucleon emission also lead to fission. All available experimental data assigned to various fission mechanisms of the same nucleus were used to determine fission barrier parameters. For uranium isotopes, triple-humped fission barriers were required in order to reproduce accurately variations of the experimental fission cross sections. Our BRC fission modeling has shown that the effects of the class II or class III states located in the wells of the fission barrier sometimes provide an anti-resonant transmission rather than a resonant one. Consistent evaluations were produced for a large series of U and Pu isotopes. Resulting files were tested against integral data.« less

  2. Terrorism Outsourced: The FARC’s Criminal Alliances

    DTIC Science & Technology

    2014-12-01

    of victims],” Revista Española De Ciencia Política 10 (2004): 53‒79. 108 This is the same terrorist that planned and executed the attack on El Nogal...victims].” Revista Española De Ciencia Política 10, (2004): 53‒79. De Nooy, Wouter, Andrej Mrvar, and Vladimir Batagelj. Exploratory Social

  3. Battle of Narratives

    DTIC Science & Technology

    2012-06-01

    18 De Nooy, Wouter, Andrej Mrvar , and Vladimir Batagelj , Exploratory Social Network Analysis with Pajek (New York: Cambridge University Press, 2005... Mrvar , and Vladimir Batagelj . Exploratory Social Network Analysis with Pajek. New York: Cambridge University Press, 2005. Democratic National...Review 54(1):33-48; Brian Uzzi. 1996 . "The Sources and Consequences of Embeddedness for the Economic Performance of Organizations: The Network Effect

  4. A World of Ideas: International Survey Gives a Voice to Teachers Everywhere

    ERIC Educational Resources Information Center

    Crow, Tracy

    2013-01-01

    Kristen Weatherby is a senior policy analyst at OECD in the education directorate. She runs the Teaching and Learning International Survey (TALIS) and is author or co-author of publications and blog posts on TALIS and teachers. She started her career as a classroom teacher in the United States before working in education in the private sector in…

  5. Data Acquisition and Preparation for Social Network Analysis Based on Email: Lessons Learned

    DTIC Science & Technology

    2009-06-01

    Mrvar , A., and Batagelj , V. (2005), Exploratory Social Network Analysis with Pajek (Structural Analysis in the Social Sciences series). Cambridge, New...visualization of large networks. This program was developed by Vladimir Batagelj and Andrej Mrvar of the University of Ljubljana in Slovenia. Pajek evolved...theory, presumes Wasserman & Faust as foundation Amazon: 55% purchase rate among viewers 5. de Nooy, W., Mrvar , A., and Batagelj , V. (2005

  6. Human talus bones from the Middle Pleistocene site of Sima de los Huesos (Sierra de Atapuerca, Burgos, Spain).

    PubMed

    Pablos, Adrián; Martínez, Ignacio; Lorenzo, Carlos; Gracia, Ana; Sala, Nohemi; Arsuaga, Juan Luis

    2013-07-01

    Here we present and describe comparatively 25 talus bones from the Middle Pleistocene site of the Sima de los Huesos (SH) (Sierra de Atapuerca, Burgos, Spain). These tali belong to 14 individuals (11 adult and three immature). Although variation among Middle and Late Pleistocene tali tends to be subtle, this study has identified unique morphological characteristics of the SH tali. They are vertically shorter than those of Late Pleistocene Homo sapiens, and show a shorter head and a broader lateral malleolar facet than all of the samples. Moreover, a few shared characters with Neanderthals are consistent with the hypothesis that the SH population and Neanderthals are sister groups. These shared characters are a broad lateral malleolar facet, a trochlear height intermediate between modern humans and Late Pleistocene H. sapiens, and a short middle calcaneal facet. It has been possible to propose sex assignment for the SH tali based on their size. Stature estimates based on these fossils give a mean stature of 174.4 cm for males and 161.9 cm for females, similar to that obtained based on the long bones from this same site. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. Self-Organized Terrorist-Counterterrorist Adaptive Coevolutions, Part 1: A Conceptual Design

    DTIC Science & Technology

    2005-02-01

    nodes. Imple- mented in Delphi, it runs in the Windows environment and is being developed by Vladimir Batagelj and Andrej Mrvar . Pajek supports all...Post, January 13, 2002. [22] J. M. Epstein and Robert L. Axtell, Growing Artificial Societies: Social Science from the Bottom Up, MIT Press, 1996 . [23...Mathematical Background and Technical Sourcebook, Center for Naval Analyses Information Manual CIM-461, Unclassified, 1996 . Available on-line, in Adobe’s

  8. Social Network Collaboration for Crisis Response Operations: Developing a Situational Awareness (SA) Tool to Improve Haiti’s Interagency Relief Efforts

    DTIC Science & Technology

    2011-06-01

    and interpret patterns of social ties among actors, either multitudinous or relatively few (de Nooy, Mrvar , & Batagelj , 2005, p. 5). An aspect of...millions of vertices [aka nodes] ( Batagelj & Mrvar , 2003). With its ability to process large networks, it is considered an excellent social-network...8217Vladimir Batagelj and Andrej Mrvar —program package Pajek: http://vlado.fmf.uni-lj.si/pub/networks/pajek/’ name=’generator’/> </head> <Scene

  9. Unsupervised Spatial, Temporal and Relational Models for Social Processes

    DTIC Science & Technology

    2012-02-01

    Andrej Mrvar . A partitioning approach to structural balance. Social Networks, 18(2):149 – 168, 1996 . [37] Thi V. Duong, Hung H. Bui, Dinh Q. Phung, and...partitioning provided by Doreian and Mrvar [36], who demonstrate that there was increasing evidence over time that 62 CHAPTER 4. COMMUNITY DETECTION this...foursome was a genuine group. Doreian and Mrvar used a block modeling approach optimiz- ing structural balance, a measure of cohesion incorporating

  10. [Visits of patients with exertional rhabdomyolysis to the Emergency Department at Landspítali, The National University Hospital of Iceland in the years 2008-2012].

    PubMed

    Halldorsson, Arnljotur Bjorn; Benedikz, Elisabet; Olafsson, Isleifur; Mogensen, Brynjolfur

    2016-03-01

    Overexertion and too much training are among the -multiple etiologies of rhabdomyolysis. Creatine kinase (CK) and myo-globine, released from skeletal muscle cells, are useful for diagnosis and follow-up. Acute kidney injury is a serious complication of myoglobinemia. Literature on exertional rhabdomyolysis in the general population is scarce. The aim of this study was to investigate the epidemiology of exertional rhabdomyolysis among patients diagnosed at Landspítali The National University Hospital of Iceland in 2008-2012. The study was retrospective and observational. All patients presenting with muscle pain after exertion and elevated creatine kinase >1000 IU/L, during the period from 1 January 2008 to 31 December 2012, were included. Patients with CK elevations secondary to causes other than exertion were excluded. Variables included: patient number and gender, CK-levels, date of hospital admission, cause of rhabdomyolysis, location of injured muscle groups, length of hospital stay, complications and means of fluid replacement. Population figures of the capital region were gathered from Statistics Iceland and information on sport practice in the capital region from The National Olympic and Sports Association of Iceland. Exertional rhabdomyolysis was diagnosed in 54 patients, 18 females (33,3%) and 36 males (66,7%), or 8,3% of rhabdomyolysis cases from all causes in the study period (648 cases). Incidence in the capital region was 5,0/100.000 inhabitants per year in the study period. Median age was 28 years and median CK-level was 24.132 IU/L. CK-levels were higher among females but the difference between genders was not significant. Muscle groups of the upper and lower extremities were most frequently affected (89%). Thirty patients received intravenous fluids. They had significantly higher CK values than other patients. One patient developed acute kidney injury. Information on sport practice and physical training in the capital region was not available

  11. Measurement of 58Fe (p , n)58Co reaction cross-section within the proton energy range of 3.38 to 19.63 MeV

    NASA Astrophysics Data System (ADS)

    Ghosh, Reetuparna; Badwar, Sylvia; Lawriniang, Bioletty; Jyrwa, Betylda; Naik, Haldhara; Naik, Yeshwant; Suryanarayana, Saraswatula Venkata; Ganesan, Srinivasan

    2017-08-01

    The 58Fe (p , n)58Co reaction cross-section within Giant Dipole Resonance (GDR) region i.e. from 3.38 to 19.63 MeV was measured by stacked-foil activation and off-line γ-ray spectrometric technique using the BARC-TIFR Pelletron facility at Mumbai. The present data were compared with the existing literature data and found to be in good agreement. The 58Fe (p , n)58Co reaction cross-section as a function of proton energy was also theoretically calculated by using the computer code TALYS-1.8 and found to be in good agreement, which shows the validity of the TALYS-1.8 program.

  12. Theoretical evaluation of the reaction rates for {sup 26}Al(n,p){sup 26}Mg and {sup 26}Al(n,{alpha}){sup 23}Na

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Oginni, B. M.; Iliadis, C.; Champagne, A. E.

    2011-02-15

    The reactions that destroy {sup 26}Al in massive stars have significance in a number of astrophysical contexts. We evaluate the reaction rates of {sup 26}Al(n,p){sup 26}Mg and {sup 26}Al(n,{alpha}){sup 23}Na using cross sections obtained from the codes empire and talys. These have been compared to the published rates obtained from the non-smoker code and to some experimental data. We show that the results obtained from empire and talys are comparable to those from non-smoker. We also show how the theoretical results vary with respect to changes in the input parameters. Finally, we present recommended rates for these reactions using themore » available experimental data and our new theoretical results.« less

  13. Neutron-induced reactions on AlF3 studied using the optical model

    NASA Astrophysics Data System (ADS)

    Ma, Chun-Wang; Lv, Cui-Juan; Zhang, Guo-Qiang; Wang, Hong-Wei; Zuo, Jia-Xu

    2015-08-01

    Neutron-induced reactions on 27Al and 19F nuclei are investigated using the optical model implemented in the TALYS 1.4 toolkit. Incident neutron energies in a wide range from 0.1 keV to 30 MeV are calculated. The cross sections for the main channels (n, np), (n, p), (n, α), (n, 2n), and (n, γ) and the total reaction cross section (n, tot) of the reactions are obtained. When the default parameters in TALYS 1.4 are adopted, the calculated results agree with the measured results. Based on the calculated results for the n + 27Al and n + 19F reactions, the results of the n + 27Al19F reactions are predicted. These results are useful both for the design of thorium-based molten salt reactors and for neutron activation analysis techniques.

  14. Teaching Practices and Pedagogical Innovations: Evidence from TALIS

    ERIC Educational Resources Information Center

    Vieluf, Svenja; Kaplan, David; Klieme, Eckhard; Bayer, Sonja

    2012-01-01

    Fortunately, teaching practices help shape the learning experiences and increase motivation and achievement for students. In addition, it has been revealed that when teachers collaborate well together they also tend to work better with students. This new informative publication clearly identifies and arranges profiles in relation to two connected…

  15. Osteochondrosis, Synovial Fossae, and Articular Indentations in the Talus and Distal Tibia of Growing Domestic Pigs and Wild Boars.

    PubMed

    Etterlin, P E; Ekman, S; Strand, R; Olstad, K; Ley, C J

    2017-05-01

    Articular osteochondrosis (OC) often develops in typical locations within joints, and the characterization of OC distribution in the pig tarsus is incomplete. Prevalence of OC is high in domestic pigs but is presumed to be low in wild boars. Postmortem and computed tomography (CT) examinations of the talus and distal tibia from 40 domestic pigs and 39 wild boars were evaluated for the locations and frequencies of OC, synovial fossae, and other articular indentations, and frequency distribution maps were made. All domestic pigs but only 5 wild boars (13%) had OC on the talus. In domestic pigs, OC consistently affected the axial aspect of the medial trochlea tali in 11 (28%) joints and the distomedial talus in 26 (65%) joints. In wild boars, all OC lesions consistently affected the distomedial talus. On the articular surface of the distal tibia, all domestic pigs and 34 wild boars (87%) had synovial fossae and 7 domestic pigs (18%) had superficial cartilage fibrillation opposite an OC lesion (kissing lesion). Other articular indentations occurred in the intertrochlear groove of the talus in all domestic pigs and 13 wild boars (33%) and were less common on the trochlea tali. The prevalence of tarsal OC in wild boars is low. In domestic pigs and wild boars, OC is typically localized to the distomedial talus and in domestic pigs also to the medial trochlea tali. Further investigations into the reasons for the low OC prevalence in wild boars may help in developing strategies to reduce OC incidence in domestic pigs.

  16. 76 FR 49459 - Notice of Proposed Information Collection Requests

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-10

    ... feedback; teachers' instructional beliefs and pedagogical practices; school climate and ethos; [[Page 49460... schools. Data are collected through questionnaires from individual teachers and their school principals in lower secondary schools (grades 7, 8 and 9) in the United States. TALIS' main objective is to help...

  17. Sharing a Disparate Landscape

    ERIC Educational Resources Information Center

    Ali-Khan, Carolyne

    2010-01-01

    Working across boundaries of power, identity, and political geography is fraught with difficulties and contradictions. In Tali Tal and Iris Alkaher's, "Collaborative environmental projects in a multicultural society: Working from within separate or mutual landscapes?" the authors describe their efforts to do this in the highly charged…

  18. Special features of isomeric ratios in nuclear reactions induced by various projectile particles

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Danagulyan, A. S.; Hovhannisyan, G. H., E-mail: hov-gohar@ysu.am; Bakhshiyan, T. M.

    2016-05-15

    Calculations for (p, n) and (α, p3n) reactions were performed with the aid of the TALYS-1.4 code. Reactions in which the mass numbers of target and product nuclei were identical were examined in the range of A = 44–124. Excitation functions were obtained for product nuclei in ground and isomeric states, and isomeric ratios were calculated. The calculated data reflect well the dependence of the isomeric ratios on the projectile type. A comparison of the calculated and experimental data reveals, that, for some nuclei in a high-spin state, the calculated data fall greatly short of their experimental counterparts. These discrepanciesmore » may be due to the presence of high-spin yrast states and rotational bands in these nuclei. Calculations involving various level-density models included in the TALYS-1.4 code with allowance for the enhancement of collective effects do not remove the discrepancies in the majority of cases.« less

  19. Dipole strength in 80Se below the neutron-separation energy for the nuclear transmutation of 79Se

    NASA Astrophysics Data System (ADS)

    Makinaga, Ayano; Massarczyk, Ralph; Beard, Mary; Schwengner, Ronald; Otsu, Hideaki; Müller, Stefan; Röder, Marko; Schmidt, Konrad; Wagner, Andreas

    2017-09-01

    The γ-ray strength function (γSF) in 80Se is an important parameter to estimate the neutron-capture cross section of 79Se which is one of the long-lived fission products (LLFPs). Until now, the γSF method was applied for 80Se only above the neutron-separation energy (Sn) and the evaluated 79Se(n,γ) cross section has an instability caused by the GSF below Sn. We studied the dipole-strength distribution of 80Se in a photon-scattering experiment using bremsstrahlung produced by an electron beam of an energy of 11.5 MeV at the linear accelerator ELBE at HZDR. The present photoabsorption cross section of 80Se was combined with results of (γ,n) experiments and are compared with predictions usinmg the TALYS code. We also estimated the 79Se(n,γ) cross sections and compare them with TALYS predictionms and earlier work by other groups.

  20. The Global Teaching Profession: How Treating Teachers as Knowledge Workers Improves the Esteem of the Teaching Profession

    ERIC Educational Resources Information Center

    Price, Heather E.; Weatherby, Kristen

    2018-01-01

    To better understand the status of the teaching profession, we present a conceptual framework outlining the 4 domains of knowledge-worker professionals: professional benchmarks, professional discretion, room for promotion, and workplace conditions and use the TALIS 2013 survey data to show that these domains exist globally and vary within…

  1. MESH Pakistan: Prospects and Challenges

    ERIC Educational Resources Information Center

    Leask, Marilyn; Jumani, Nabi Bux

    2015-01-01

    The Organisation for Economic Co-operation and Development periodically surveys teaching and learning issues (the TALIS surveys) in the most developed countries. In their 2009 report, they commented that although teacher quality is the fundamental component in high performing systems, the education sector has been slow to develop systemic…

  2. Improving the Professional Knowledge Base for Education: Using Knowledge Management and Web 2.0 Tools

    ERIC Educational Resources Information Center

    Leask, Marilyn

    2011-01-01

    Improving education systems is an elusive goal. Despite considerable investment, international studies such as the Teaching and Learning International Survey (TALIS) project of the Organisation for Economic Cooperation and Development (OECD) and the McKinsey Report, "How The World's Best Performing Schools Come Out On Top", indicate that improving…

  3. The impact of different types of talus deformation after treatment of clubfeet.

    PubMed

    Kolb, Alexander; Willegger, Madeleine; Schuh, Reinhard; Kaider, Alexandra; Chiari, Catharina; Windhager, Reinhard

    2017-01-01

    Deformation of the talus in idiopathic congenital clubfeet is a known problem after treatment. However evidence on types of talus deformation and clinical relevance is rare. The aims of this study were first to define different types of talus deformation, and second, to evaluate the impact of these types on long-term results. At a minimum follow-up of ten years 40 idiopathic clubfeet treated by a modified dorsomedial release were analyzed. Based on morphological appearance and the widened range of radius to length ratios (R/L-ratio) in treated clubfeet deformed tali were divided into two groups: tali with decreased R/L-ratios were classified as small-dome talus deformation (SD), tali with increased R/L-ratios were classified as flat-top talus deformation (FT). The impact on degree of arthrosis in the ankle joint, clinical outcome, and ankle range of motion was analyzed. Small-dome talus deformation (SD) was found in nine feet. This group showed decreased R/L-ratios and increased talus opening angles, which were linked to an increased range of motion of the ankle joint (p = 0.033). The impact on onset of arthrosis was not significant for this group (p = 0.056). The group of flat top talus deformation (nine feet) showed increased R/L-ratios and decreased talus opening angles, decreased range of motion (p = 0.019), and a significant impact on onset of arthrosis (p = 0.010). Our study defines a new subgroup of talus deformation: the small dome talus deformation tends to show a better ankle joint range of motion and a lower risk of arthrosis compared to the classical flat dome talus deformation.

  4. Classroom Disciplinary Climate in Secondary Schools in England: What Is the Real Picture?

    ERIC Educational Resources Information Center

    Jenkins, Andrew; Ueno, Akiko

    2017-01-01

    This paper uses international data from a range of sources, principally the 2013 round of the Teaching and Learning International Survey (TALIS 2013), to provide new information on classroom disciplinary climate in secondary schools in England. The paper advances the literature in three distinct ways. Firstly, the data show that teachers in…

  5. How Do Teachers Teach? Insights from Teachers and Students. Teaching in Focus No. 18

    ERIC Educational Resources Information Center

    OECD Publishing, 2017

    2017-01-01

    Educational quality is defined and shaped by the classroom practices implemented by teachers in our schools. The Teaching and Learning International Survey (TALIS)-PISA link presents a unique opportunity to explore what takes place in the classroom by listening to the voices of teachers and students. Teachers, with their professional training and…

  6. Teaching with Technology. Teaching in Focus. No. 12

    ERIC Educational Resources Information Center

    OECD Publishing, 2015

    2015-01-01

    Information and communication technology (ICT) use has been identified as one of the more active teaching practices, which promote skills students need for success. And yet, less than 40% of teachers across Teaching and Learning International Survey (TALIS) countries report using ICT as a regular part of their teaching practice. Shortages in…

  7. Measurement of cross-sections for the 93Nb(p,n)93mMo and 93Nb(p,pn)92mNb reactions up to ∼20 MeV energy

    NASA Astrophysics Data System (ADS)

    Lawriniang, B.; Ghosh, R.; Badwar, S.; Vansola, V.; Santhi Sheela, Y.; Suryanarayana, S. V.; Naik, H.; Naik, Y. P.; Jyrwa, B.

    2018-05-01

    Excitation functions of the 93Nb(p,n)93mMo and 93Nb(p,pn)92mNb reactions were measured from threshold energies to ∼ 20MeV by employing stacked foil activation technique in combination with the off-line γ-ray spectroscopy at the BARC-TIFR Pelletron facility, Mumbai. For the 20 MeV proton beam, the energy degradation along the stack was calculated using the computer code SRIM 2013. The proton beam intensity was determined via the natCu(p,x)62Zn monitor reaction. The experimental data obtained were compared with the theoretical results from TALYS-1.8 as well as with the literature data available in EXFOR. It was found that for the 93Nb(p,n)92mMo reaction, the present data are in close agreement with some of the recent literature data and the theoretical values based on TALYS-1.8 but are lower than the other literature data. In the case of 93Nb(p,pn)93mNb reaction, present data agree very well with the literature data and the theoretical values.

  8. Reading Three Israeli Bat/Bar Mitzvah Curricula as Gender, Theological, and Autobiographical Texts

    ERIC Educational Resources Information Center

    Bacon, Brenda Socachevsky

    2008-01-01

    This article analyzes three curricula for the bat/bar-mitzvah year of the public religious, Tali and public schools in Israel. It compares their views on gender and theology, and throws light on the intersection of gender, religion and education in Israeli society. It shows how the messages of the public religious and public schools serve to…

  9. U.S. EPA, Pesticide Product Label, SUMMER COMFORT COAT SPRAY, 07/08/1971

    EPA Pesticide Factsheets

    2011-04-19

    ... tali "iW:jJ ~lJlt' ~H." • _ !!U£ ___ eo A, r: r ! \\j f I rJ (~ [) lLJ IE: ~ T ~~. Py·,t:'·I::, 'T r',. ;, U I .' r' ,: ...

  10. First Estimate of the Exoplanet Population from Kepler Observations

    NASA Astrophysics Data System (ADS)

    Borucki, William J.; Koch, D. G.; Batalha, N.; Caldwell, D.; Dunham, E. W.; Gautier, T. N., III; Howell, S. B.; Jenkins, J. M.; Marcy, G. W.; Rowe, J.; Charbonneau, D.; Ciardi, D.; Ford, E. B.; Christiansen, J. L.; Kolodziejczak, J.; Prsa, A.

    2011-05-01

    William J. Borucki, David G. Koch, Natalie Batalha, Derek Buzasi , Doug Caldwell, David Charbonneau, Jessie L. Christiansen, David R. Ciardi, Edward Dunham, Eric B. Ford, Steve Thomas N. Gautier III, Steve Howell, Jon M. Jenkins, Jeffery Kolodziejczak, Geoffrey W. Marcy, Jason Rowe, and Andrej Prsa A model was developed to provide a first estimate of the intrinsic frequency of planetary candidates based on the number of detected planetary candidates and the measured noise for each of the 156,000 observed stars. The estimated distributions for the exoplanet frequency are presented with respect to the semi-major axis and the stellar effective temperature and represent values appropriate only to short-period candidates. Improved estimates are expected after a Monte Carlo study of the sensitivity of the data analysis pipeline to transit signals injected at the pixel level is completed.

  11. Production of scandium-44 m and scandium-44 g with deuterons on calcium-44: cross section measurements and production yield calculations.

    PubMed

    Duchemin, C; Guertin, A; Haddad, F; Michel, N; Métivier, V

    2015-09-07

    HIGHLIGHTS • Production of Sc-44 m, Sc-44 g and contaminants. • Experimental values determined using the stacked-foil technique. • Thick-Target production Yield (TTY) calculations. • Comparison with the TALYS code version 1.6.Among the large number of radionuclides of medical interest, Sc-44 is promising for PET imaging. Either the ground-state Sc-44 g or the metastable-state Sc-44 m can be used for such applications, depending on the molecule used as vector. This study compares the production rates of both Sc-44 states, when protons or deuterons are used as projectiles on an enriched Calcium-44 target. This work presents the first set of data for the deuteron route. The results are compared with the TALYS code. The Thick-Target production Yields of Sc-44 m and Sc-44 g are calculated and compared with those for the proton route for three different scenarios: the production of Sc-44 g for conventional PET imaging, its production for the new 3 γ imaging technique developed at the SUBATECH laboratory and the production of a Sc-44 m/Sc-44 g in vivo generator for antibody labelling.

  12. [Prevalence of the use of skin bleaching cosmetics in two areas in Dakar (Sénégal)].

    PubMed

    Wone, I; Tal-Dia, A; Diallo, O F; Badiane, M; Touré, K; Diallo, I

    2000-01-01

    The use of skin bleaching cosmetics is an increasingly widespread phenomenon in Africa. If the negative sanitary effects of this practice are today well known, reliable statistics on the importance of the problem within the global population are rare. Our study, conducted in two popular areas in Dakar, Usine bene taly and Usine Niary Taly, had 2 objectives: to determine the prevalence of the use of skin bleaching cosmetics in the studied zones, to describe the prevalence according to the following variables: age, matrimonial situation, level and/or type of instruction, job, type of agents used. For that purpose, we conducted a transverse study on a representative sample of 600 women from 15 to 55 years old. This study reveals a prevalence of the use of skin bleaching cosmetics of 67.2%. The agents found are hydroquinone derivatives (61%), topical corticosteroids (37%) and agents from unknown origin (2%). The use of skin bleaching cosmetics is more important among young women between 30 to 44 years (72.5%), married (72.2%), analphabets (75%), working (77.6%). Studies conducted in Mali and Togo gave comparable results, which give perspectives for a prevention based on education an awareness.

  13. The Treatment Effect of Porous Titanium Alloy Rod on the Early Stage Talar Osteonecrosis of Sheep

    PubMed Central

    Zhang, Yong-Quan; Zhang, Zhi-Yong; Guo, Zheng

    2013-01-01

    Osteonecrosis of the talus (ONT) may severely affect the function of the ankle joint. Most orthopedists believe that ONT should be treated at an early stage, but a concise and effective surgical treatment is lacking. In this study, porous titanium alloy rods were prepared and implanted into the tali of sheep with early-stage ONT (IM group). The curative effect of the rods was compared to treatment by core decompression (DC group). No significant differences in bone reconstruction were observed between the two groups at 1 month after intervention. After 3 months, the macroscopic view of gross specimens of the IM group showed ordinary contours, but the specimens of the DC group showed obvious partial bone defects and cartilage degeneration. Quantitative analysis of the reconstructed trabeculae by micro-CT and histological study suggested that the curative effect of the IM group was superior to that of the DC group at 3 months after intervention. These favorable short-term results of the implantation of porous titanium alloy rods into the tali of sheep with early-stage ONT may provide insight into an innovative surgical treatment for ONT. PMID:23516485

  14. Student Misconceptions About Astronomy and the Best Order of Teaching Astronomical Concepts

    NASA Astrophysics Data System (ADS)

    Favia, Andrej; Comins, N. F.; Thorpe, G.

    2013-01-01

    My (Andrej Favia) Ph.D. thesis involves quantifying the "difficulty" of unlearning common astronomy misconceptions. I do this by applying factor analysis and Item Response Theory (IRT) to a retrospective inventory of when, or if, college students dispelled the misconceptions under consideration. Our inventory covers 235 misconceptions identified over the span of 10 years of teaching the college astronomy lecture course at the Universe of Maine by NFC. The analysis yields logical groupings of topics (e.g., teach one planet at a time rather than use comparative planetology) and the "order of difficulty" of the associated topics. We have results for about one fourth of the inventory, and our results show that there are concepts of different difficulties, which suggest that they should be presented in different orders. We also find that the order of teaching concepts is sometimes different for high school and college level courses.

  15. The production of radionuclides for nuclear medicine from a compact, low-energy accelerator system.

    PubMed

    Webster, William D; Parks, Geoffrey T; Titov, Dmitry; Beasley, Paul

    2014-05-01

    The field of nuclear medicine is reliant on radionuclides for medical imaging procedures and radioimmunotherapy (RIT). The recent shut-downs of key radionuclide producers have highlighted the fragility of the current radionuclide supply network, however. To ensure that nuclear medicine can continue to grow, adding new diagnostic and therapy options to healthcare, novel and reliable production methods are required. Siemens are developing a low-energy, high-current - up to 10 MeV and 1 mA respectively - accelerator. The capability of this low-cost, compact system for radionuclide production, for use in nuclear medicine procedures, has been considered. The production of three medically important radionuclides - (89)Zr, (64)Cu, and (103)Pd - has been considered, via the (89)Y(p,n), (64)Ni(p,n) and (103)Rh(p,n) reactions, respectively. Theoretical cross-sections were generated using TALYS and compared to experimental data available from EXFOR. Stopping power values generated by SRIM have been used, with the TALYS-generated excitation functions, to calculate potential yields and isotopic purity in different irradiation regimes. The TALYS excitation functions were found to have a good agreement with the experimental data available from the EXFOR database. It was found that both (89)Zr and (64)Cu could be produced with high isotopic purity (over 99%), with activity yields suitable for medical diagnostics and therapy, at a proton energy of 10MeV. At 10MeV, the irradiation of (103)Rh produced appreciable quantities of (102)Pd, reducing the isotopic purity. A reduction in beam energy to 9.5MeV increased the radioisotopic purity to 99% with only a small reduction in activity yield. This work demonstrates that the low-energy, compact accelerator system under development by Siemens would be capable of providing sufficient quantities of (89)Zr, (64)Cu, and (103)Pd for use in medical diagnostics and therapy. It is suggested that the system could be used to produce many other

  16. A Design Methodology and Prototype for the Reserve Training Support System.

    DTIC Science & Technology

    1985-03-01

    guaranteeing that t d) taLIeS tat are ftn joined togjther art also stored to3Ltner. Clusterin- S Otal’ly transprent o ,ll :ueiin aloi -It the Ja Ca...ACDUTRA 23-JAN-85 G C G G G 2. MIDDLE LEVEL W INSLOW SEEGER WINSLOW NAME 30-JAN-85 Y G C G WINSLCW SEGER WINSLOW RUIC BILLET 04-FEB-35 Y Y Y Y RINSLOW

  17. Free-standing thermalized graphene: a hard/soft hybrid

    NASA Astrophysics Data System (ADS)

    Nelson, David

    2015-03-01

    Understanding deformations of macroscopic thin plates and shells has a long and rich history, culminating with the Foeppl-von Karman equations in 1904. These highly nonlinear equations are characterized by a dimensionless coupling constant (the ``Foeppl-von Karman number'') that can easily reach vK = 107 in an ordinary sheet of writing paper. Since the late 1980's, it has been clear that thermal fluctuations in microscopically thin elastic membranes fundamentally alter the long wavelength physics, leading to a negative thermal expansion coefficient, and a strongly scale-dependent bending energy and Young's modulus. Recent experiments from the McEuen group at Cornell that twist and bend individual atomically-thin free-standing graphene sheets (with vK = 1013!) call for a theory of the mechanical deformation of thermally excited membranes with large Foeppl-von Karman number. We present here results for the bending and pulling of thermalized graphene ribbons and tabs in the cantilever mode. Work done in collaboration with Andrej Kosmrlj.

  18. Isomeric ratio measurements for the radiative neutron capture 176Lu(n,γ) at DANCE

    NASA Astrophysics Data System (ADS)

    Denis-Petit, D.; Roig, O.; Méot, V.; Morillon, B.; Romain, P.; Jandel, M.; Kawano, T.; Vieira, D. J.; Bond, E. M.; Bredeweg, T. A.; Couture, A. J.; Haight, R. C.; Keksis, A. L.; Rundberg, R. S.; Ullmann, J. L.

    2017-09-01

    The isomeric ratios for the neutron capture reaction 176Lu(n,γ) to the Jπ = 5/2-, 761.7 keV, T1/2 = 32.8 ns and the Jπ = 15/2+, 1356.9 keV, T1/2 = 11.1 ns levels of 177Lu, have been measured for the first time with the Detector for Advanced Neutron Capture Experiments (DANCE) at the Los Alamos National Laboratory. These measured isomeric ratios are compared with TALYS calculations.

  19. Political Culture and the Nature of Political Participation in Egypt.

    DTIC Science & Technology

    1980-06-01

    the committee which included Muhyi al -Din, Sabri, Abd al -Latif al - Baghdadi and Sami Sharaf. Sadat’s first act independent of the committee was his order...military officers, including Baghdadi and Air Force General Madkuri al -Izz, demands were made for Sadat to restore Egypt’s position between the...published in Al -Tali’a, Al -Ahram, and Eyptian Gazette, May-June, 1972. English translations of selected excerpts are contained in FBIS and JPRS. 89

  20. Human calcanei from the Middle Pleistocene site of Sima de los Huesos (Sierra de Atapuerca, Burgos, Spain).

    PubMed

    Pablos, Adrián; Martínez, Ignacio; Lorenzo, Carlos; Sala, Nohemi; Gracia-Téllez, Ana; Arsuaga, Juan Luis

    2014-11-01

    The existence of calcanei in the fossil record prior to modern humans and Neandertals is very scarce. This skeletal element is fundamental to understanding the evolution of the morphology of the foot in human evolution. Here we present and metrically and comparatively describe 29 calcaneus remains from the Middle Pleistocene site of Sima de los Huesos (SH) (Sierra de Atapuerca, Burgos, Spain). These calcanei belong to 15 individuals (nine adults, two adolescents and four immature individuals). The metric and morphological differences in the calcanei among Middle and Late Pleistocene hominins tend to be subtle. However, the calcanei from SH are broad and robust with large articular surfaces and most significantly, exhibit a very projected sustentaculum tali. A biomechanical and phylogenetic interpretation is proffered to explain the observed morphology of these calcanei. It has been possible to propose tentative sex assignments for the SH calcanei based on size, using methods similar to those used to establish sex from the talus bones from SH. The estimation of stature based on the calcaneus provides a mean of 175.3 cm for males and 160.6 for females, which is similar to that obtained using other skeletal parts from the site. In sum, the SH calcanei are robust with a proportionally long tubercle and a projected sustentaculum tali, which are traits shared by Neandertals. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Measurements of neutron capture cross sections on 70Zn at 0.96 and 1.69 MeV

    NASA Astrophysics Data System (ADS)

    Punte, L. R. M.; Lalremruata, B.; Otuka, N.; Suryanarayana, S. V.; Iwamoto, Y.; Pachuau, Rebecca; Satheesh, B.; Thanga, H. H.; Danu, L. S.; Desai, V. V.; Hlondo, L. R.; Kailas, S.; Ganesan, S.; Nayak, B. K.; Saxena, A.

    2017-02-01

    The cross sections of the 70Zn(n ,γ )Zn71m (T1 /2=3.96 ±0.05 -h ) reaction have been measured relative to the 197Au(n ,γ )198Au cross sections at 0.96 and 1.69 MeV using a 7Li(p ,n )7Be neutron source and activation technique. The cross section of this reaction has been measured for the first time in the MeV region. The new experimental cross sections have been compared with the theoretical prediction by talys-1.6 with various level-density models and γ -ray strength functions as well as the tendl-2015 library. The talys-1.6 calculation with the generalized superfluid level-density model and Kopecky-Uhl generalized Lorentzian γ -ray strength function predicted the new experimental cross sections at both incident energies. The 70Zn(n ,γ ) g+m 71Zn total capture cross sections have also been derived by applying the evaluated isomeric ratios in the tendl-2015 library to the measured partial capture cross sections. The spectrum averaged total capture cross sections derived in the present paper agree well with the jendl-4.0 library at 0.96 MeV, whereas it lies between the tendl-2015 and the jendl-4.0 libraries at 1.69 MeV.

  2. Avoiding Pitfalls of Tibiotalocalcaneal Nail Malposition With Internal Rotation Axial Heel View.

    PubMed

    Callahan, Ryan; Juliano, Paul; Aydogan, Umur; Clayton, Justin

    2018-04-01

    Tibiotalocalcaneal (TTC) nails are often used for complex hind foot arthrodesis and deformity correction. The natural valgus alignment of the hindfoot creates a challenge to optimum placement of the guidewire and eventual nail with a straight or valgus-curved nail. Five fresh frozen cadavers were used for placement of a TTC guidewire with standard anterior-posterior (AP), lateral, and Harris axial heel views as a reference for proper placement. The limb was then rotated 15°, 30°, and 45° both internally and externally to evaluate the perceived amount of osseous purchase within the calcaneus. The TTC nail was then inserted and dissection was performed to demonstrate proximity of the nail to the sustentaculum tali and neurovascular structures. A 30° internal rotation Harris axial heel view demonstrated the most accurate representation of osseous purchase within the calcaneus with the guidewire and nail placement. When the guidewire was placed with standard imaging the nail was often ultimately placed in close proximity to the sustentaculum tali and neurovascular structures. Careful placement of the guidewire prior to reaming and nail placement should be undertaken to avoid neurovascular injury and to increase osseous purchase. For optimal guidewire placement, the authors suggest using appropriate anatomic landmarks and using a 30° internally rotated Harris axial heel view to verify correct placement. Level V: Expert opinion.

  3. Fission Activities of the Nuclear Reactions Group in Uppsala

    NASA Astrophysics Data System (ADS)

    Al-Adili, A.; Alhassan, E.; Gustavsson, C.; Helgesson, P.; Jansson, K.; Koning, A.; Lantz, M.; Mattera, A.; Prokofiev, A. V.; Rakopoulos, V.; Sjöstrand, H.; Solders, A.; Tarrío, D.; Österlund, M.; Pomp, S.

    This paper highlights some of the main activities related to fission of the nuclear reactions group at Uppsala University. The group is involved for instance in fission yield experiments at the IGISOL facility, cross-section measurements at the NFS facility, as well as fission dynamics studies at the IRMM JRC-EC. Moreover, work is ongoing on the Total Monte Carlo (TMC) methodology and on including the GEF fission code into the TALYS nuclear reaction code. Selected results from these projects are discussed.

  4. Instructional Leadership Practices and Teacher Efficacy Beliefs: Cross-National Evidence from TALIS

    ERIC Educational Resources Information Center

    Rew, W. Joshua

    2013-01-01

    School principals have a small to moderate influence on student achievement; however, this influence is largely indirect via the behaviors, beliefs, knowledge, practices, and competencies of their teachers. Despite a growing number of studies examining the indirect influence of school principals on student achievement, there is still much to know…

  5. Absolute cross sections of the 86Sr(α,n)89Zr reaction at energies of astrophysical interest

    NASA Astrophysics Data System (ADS)

    Oprea, Andreea; Glodariu, Tudor; Filipescu, Dan; Gheorghe, Ioana; Mitu, Andreea; Boromiza, Marian; Bucurescu, Dorel; Costache, Cristian; Cata-Danil, Irina; Florea, Nicoleta; Ghita, Dan Gabriel; Ionescu, Alina; Marginean, Nicolae; Marginean, Raluca; Mihai, Constantin; Mihai, Radu; Negret, Alexandru; Nita, Cristina; Olacel, Adina; Pascu, Sorin; Sotty, Cristophe; Suvaila, Rares; Stan, Lucian; Stroe, Lucian; Serban, Andreea; Stiru, Irina; Toma, Sebastian; Turturica, Andrei; Ujeniuc, Sorin

    2017-09-01

    Absolute cross sections for the 86Sr(α,n)89Zr reaction at energies close to the Gamow window are reported. Three thin SrF2 targets were irradiated using the 9 MV Tandem facility in IFIN-HH Bucharest that delivered α beams for the activation process. Two high-purity Germanium detectors were used to measure the induced activity of 89Zr in a low background environment. The experimental results are in very good agreement with Hauser-Feshbach statistical model calculations performed with the TALYS code.

  6. (232)Th(d,4n)(230)Pa cross-section measurements at ARRONAX facility for the production of (230)U.

    PubMed

    Duchemin, C; Guertin, A; Haddad, F; Michel, N; Métivier, V

    2014-05-01

    (226)Th (T1/2=31 min) is a promising therapeutic radionuclide since results, published in 2009, showed that it induces leukemia cells death and activates apoptosis pathways with higher efficiencies than (213)Bi. (226)Th can be obtained via the (230)U α decay. This study focuses on the (230)U production using the (232)Th(d,4n)(230)Pa(β-)(230)U reaction. Experimental cross sections for deuteron-induced reactions on (232)Th were measured from 30 down to 19 MeV using the stacked-foil technique with beams provided by the ARRONAX cyclotron. After irradiation, all foils (targets as well as monitors) were measured using a high-purity germanium detector. Our new (230)Pa cross-section values, as well as those of (232)Pa and (233)Pa contaminants created during the irradiation, were compared with previous measurements and with results given by the TALYS code. Experimentally, same trends were observed with slight differences in orders of magnitude mainly due to the nuclear data change. Improvements are ongoing about the TALYS code to better reproduce the data for deuteron-induced reactions on (232)Th. Using our cross-section data points from the (232)Th(d,4n)(230)Pa reaction, we have calculated the thick-target yield of (230)U, in Bq/μA·h. This value allows now to a full comparison between the different production routes, showing that the proton routes must be preferred. Copyright © 2014 Elsevier Inc. All rights reserved.

  7. Photo-neutron reaction cross-sections for natMo in the bremsstrahlung end-point energies of 12-16 and 45-70 MeV

    NASA Astrophysics Data System (ADS)

    Naik, H.; Kim, G. N.; Kapote Noy, R.; Schwengner, R.; Kim, K.; Zaman, M.; Shin, S. G.; Gey, Y.; Massarczyk, R.; John, R.; Junghans, A.; Wagner, A.; Cho, M.-H.

    2016-07-01

    The natMo( γ, xn)90, 91, 99Mo reaction cross-sections were experimentally determined for the bremsstrahlung end-point energies of 12, 14, 16, 45, 50, 55, 60 and 70MeV by activation and off-line γ -ray spectrometric technique and using the 20MeV electron linac (ELBE) at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR), Dresden, Germany, and the 100MeV electron linac at the Pohang Accelerator Laboratory (PAL), Pohang, Korea. The natMo( γ, xn)88, 89, 90, 91, 99Mo reaction cross-sections as a function of photon energy were also calculated using the computer code TALYS 1.6. The flux-weighted average cross-sections were obtained from the literature data and the calculated values of TALYS based on mono-energetic photons and are found to be in general agreement with the present results. The flux-weighted average experimental and theoretical cross-sections for the natMo( γ, xn)88, 89, 90, 91, 99Mo reactions increase with the bremsstrahlung end-point energy, which indicates the role of excitation energy. After a certain energy, the individual natMo( γ, xn) reaction cross-sections decrease with the increase of bremsstrahlung energy due to opening of other reactions, which indicates sharing of energy in different reaction channels. The 100Mo( γ, n) reaction cross-section is important for the production of 99Mo , which is a probable alternative to the 98Mo(n, γ) and 235U(n, f ) reactions.

  8. Professional Learning as a Predictor for Instructional Quality: A Secondary Analysis of TALIS

    ERIC Educational Resources Information Center

    Dogan, Selçuk; Yurtseven, Nihal

    2018-01-01

    The purpose of this study is to examine the effect of teachers' professional learning opportunities on instructional quality, which represents a combined approach of behaviorist, cognitivist, and constructivist principles in teaching. We incorporated professional learning communities (PLCs), professional development (PD) days, as well as 3 PD…

  9. Determination of the Secondary Neutron Flux at the Massive Natural Uranium Spallation Target

    NASA Astrophysics Data System (ADS)

    Zeman, M.; Adam, J.; Baldin, A. A.; Furman, W. I.; Gustov, S. A.; Katovsky, K.; Khushvaktov, J.; Mar`in, I. I.; Novotny, F.; Solnyshkin, A. A.; Tichy, P.; Tsoupko-Sitnikov, V. M.; Tyutyunnikov, S. I.; Vespalec, R.; Vrzalova, J.; Wagner, V.; Zavorka, L.

    The flux of secondary neutrons generated in collisions of the 660 MeV proton beam with the massive natural uranium spallation target was investigated using a set of monoisotopic threshold activation detectors. Sandwiches made of thin high-purity Al, Co, Au, and Bi metal foils were installed in different positions across the whole spallation target. The gamma-ray activity of products of (n,xn) and other studied reactions was measured offline with germanium semiconductor detectors. Reaction yields of radionuclides with half-life exceeding 100 min and with effective neutron energy thresholds between 3.6 MeV and 186 MeV provided us with information about the spectrum of spallation neutrons in this energy region and beyond. The experimental neutron flux was determined using the measured reaction yields and cross-sections calculated with the TALYS 1.8 nuclear reaction program and INCL4-ABLA event generator of MCNP6. Neutron spectra in the region of activation sandwiches were also modeled with the radiation transport code MCNPX 2.7. Neutron flux based on excitation functions from TALYS provides a reasonable description of the neutron spectrum inside the spallation target and is in good agreement with Monte-Carlo predictions. The experimental flux that uses INCL4 cross-sections rather underestimates the modeled spectrum in the whole region of interest, but the agreement within few standard deviations was reached as well. The paper summarizes basic principles of the method for determining the spectrum of high-energy neutrons without employing the spectral adjustment routines and points out to the need for model improvements and precise cross-section measurements.

  10. Experimental measurements with Monte Carlo corrections and theoretical calculations of neutron inelastic scattering cross section of 115In

    NASA Astrophysics Data System (ADS)

    Wang, Chao; Xiao, Jun; Luo, Xiaobing

    2016-10-01

    The neutron inelastic scattering cross section of 115In has been measured by the activation technique at neutron energies of 2.95, 3.94, and 5.24 MeV with the neutron capture cross sections of 197Au as an internal standard. The effects of multiple scattering and flux attenuation were corrected using the Monte Carlo code GEANT4. Based on the experimental values, the 115In neutron inelastic scattering cross sections data were theoretically calculated between the 1 and 15 MeV with the TALYS software code, the theoretical results of this study are in reasonable agreement with the available experimental results.

  11. Evaluation of excitation functions of proton and deuteron induced reactions on enriched tellurium isotopes with special relevance to the production of iodine-124.

    PubMed

    Aslam, M N; Sudár, S; Hussain, M; Malik, A A; Shah, H A; Qaim, S M

    2010-09-01

    Cross-section data for the production of medically important radionuclide (124)I via five proton and deuteron induced reactions on enriched tellurium isotopes were evaluated. The nuclear model codes, STAPRE, EMPIRE and TALYS, were used for consistency checks of the experimental data. Recommended excitation functions were derived using a well-defined statistical procedure. Therefrom integral yields were calculated. The various production routes of (124)I were compared. Presently the (124)Te(p,n)(124)I reaction is the method of choice; however, the (125)Te(p,2n)(124)I reaction also appears to have great potential.

  12. Investigation deuteron-induced reactions on cobalt

    NASA Astrophysics Data System (ADS)

    Ditrói, F.; Tárkányi, F.; Takács, S.; Hermanne, A.; Baba, M.; Ignatyuk, A. V.

    2010-09-01

    The excitation functions of deuteron-induced reactions were measured on metallic cobalt. Beyond the 56,57,58,60Co cobalt isotopes, we also identified 57Ni, 54Mn, 56Mn and 59Fe in the deuteron experiments. For the above radionuclides, the excitation functions in the measured energy range were determined and compared with the data found in the literature and with the results of model calculations (ALICE-IPPE, EMPIRE-D, EAF, and TALYS (TENDL)). The excitation functions agree with previous measurements; furthermore, we calculated the yield and thin layer activation (TLA) curves that are necessary for practical and industrial applications.

  13. Production of medical isotopes from a thorium target irradiated by light charged particles up to 70 MeV

    NASA Astrophysics Data System (ADS)

    Duchemin, C.; Guertin, A.; Haddad, F.; Michel, N.; Métivier, V.

    2015-02-01

    The irradiation of a thorium target by light charged particles (protons and deuterons) leads to the production of several isotopes of medical interest. Direct nuclear reaction allows the production of Protactinium-230 which decays to Uranium-230 the mother nucleus of Thorium-226, a promising isotope for alpha radionuclide therapy. The fission of Thorium-232 produces fragments of interest like Molybdenum-99, Iodine-131 and Cadmium-115g. We focus our study on the production of these isotopes, performing new cross section measurements and calculating production yields. Our new sets of data are compared with the literature and the last version of the TALYS code.

  14. Production of medical isotopes from a thorium target irradiated by light charged particles up to 70 MeV.

    PubMed

    Duchemin, C; Guertin, A; Haddad, F; Michel, N; Métivier, V

    2015-02-07

    The irradiation of a thorium target by light charged particles (protons and deuterons) leads to the production of several isotopes of medical interest. Direct nuclear reaction allows the production of Protactinium-230 which decays to Uranium-230 the mother nucleus of Thorium-226, a promising isotope for alpha radionuclide therapy. The fission of Thorium-232 produces fragments of interest like Molybdenum-99, Iodine-131 and Cadmium-115g. We focus our study on the production of these isotopes, performing new cross section measurements and calculating production yields. Our new sets of data are compared with the literature and the last version of the TALYS code.

  15. Light-ion Production from O, Si, Fe and Bi Induced by 175 MeV Quasi-monoenergetic Neutrons

    NASA Astrophysics Data System (ADS)

    Bevilacqua, R.; Pomp, S.; Jansson, K.; Gustavsson, C.; Österlund, M.; Simutkin, V.; Hayashi, M.; Hirayama, S.; Naitou, Y.; Watanabe, Y.; Hjalmarsson, A.; Prokofiev, A.; Tippawan, U.; Lecolley, F.-R.; Marie, N.; Leray, S.; David, J.-C.; Mashnik, S.

    2014-05-01

    We have measured double-differential cross sections in the interaction of 175 MeV quasi-monoenergetic neutrons with O, Si, Fe and Bi. We have compared these results with model calculations with INCL4.5-Abla07, MCNP6 and TALYS-1.2. We have also compared our data with PHITS calculations, where the pre-equilibrium stage of the reaction was accounted respectively using the JENDL/HE-2007 evaluated data library, the quantum molecular dynamics model (QMD) and a modified version of QMD (MQMD) to include a surface coalescence model. The most crucial aspect is the formation and emission of composite particles in the pre-equilibrium stage.

  16. Excitation function of alpha-particle-induced reactions on natNi from threshold to 44 MeV

    NASA Astrophysics Data System (ADS)

    Uddin, M. S.; Kim, K. S.; Nadeem, M.; Sudár, S.; Kim, G. N.

    2017-05-01

    Excitation functions of the natNi(α,x)62,63,65Zn, natNi(α,x)56,57Ni and natNi(α,x)56,57,58m+gCo reactions were measured from the respective thresholds to 44MeV using the stacked-foil activation technique. The tests for the beam characterization are described. The radioactivity was measured using HPGe γ-ray detectors. Theoretical calculations on α-particles-induced reactions on natNi were performed using the nuclear model code TALYS-1.8. A few results are new, the others strengthen the database. Our experimental data were compared with results of nuclear model calculations and described the reaction mechanism.

  17. Toward socio-scientific participation: changing culture in the science classroom and much more. Setting the stage

    NASA Astrophysics Data System (ADS)

    Taylor, Peter; Lee, Stuart H.; Tal, Tali

    2006-12-01

    In response to Tali and Yarden's presentation of their efforts to teach socioscientific issues, the discussants address issues of authentic versus simulated activities; teachers as learners or co-creators with their students; educating people to contribute to science-based decisionmaking; the development of such socioscientific competence; the relationship between group or participatory processes and individual development; framing real world cases for every age of student; making space to delve into the historical and social background to any scientific theory, practice, or application; educating teachers who can coach students in socioscientific inquiry; and facing off against the traditional and resurgent emphasis on highstakes, content-oriented testing of students in science.

  18. Measurement of activation cross-section of long-lived products in deuteron induced nuclear reactions on palladium in the 30-50MeV energy range.

    PubMed

    Ditrói, F; Tárkányi, F; Takács, S; Hermanne, A; Ignatyuk, A V

    2017-10-01

    Excitation functions were measured in the 31-49.2MeV energy range for the nat Pd(d,xn) 111,110m,106m,105,104g,103 Ag, nat Pd(d,x) 111m,109,101,100 Pd, nat Pd(d,x), 105,102m,102g,101m,101g,100,99m,99g Rh and nat Pd(d,x) 103,97 Ru nuclear reactions by using the stacked foil irradiation technique. The experimental results are compared with our previous results and with the theoretical predictions calculated with the ALICE-D, EMPIRE-D and TALYS (TENDL libraries) codes. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. The Quest for Comparability: Studying the Invariance of the Teachers’ Sense of Self-Efficacy (TSES) Measure across Countries

    PubMed Central

    Scherer, Ronny; Jansen, Malte; Nilsen, Trude; Areepattamannil, Shaljan; Marsh, Herbert W.

    2016-01-01

    Teachers’ self-efficacy is an important motivational construct that is positively related to a variety of outcomes for both the teachers and their students. This study addresses challenges associated with the commonly used ‘Teachers’ Sense of Self-Efficacy (TSES)’ measure across countries and provides a synergism between substantive research on teachers’ self-efficacy and the novel methodological approach of exploratory structural equation modeling (ESEM). These challenges include adequately representing the conceptual overlap between the facets of self-efficacy in a measurement model (cross-loadings) and comparing means and factor structures across countries (measurement invariance). On the basis of the OECD Teaching and Learning International Survey (TALIS) 2013 data set comprising 32 countries (N = 164,687), we investigate the effects of cross-loadings in the TSES measurement model on the results of measurement invariance testing and the estimation of relations to external constructs (i.e., working experience, job satisfaction). To further test the robustness of our results, we replicate the 32-countries analyses for three selected sub-groups of countries (i.e., Nordic, East and South-East Asian, and Anglo-Saxon country clusters). For each of the TALIS 2013 participating countries, we found that the factor structure of the self-efficacy measure is better represented by ESEM than by confirmatory factor analysis (CFA) models that do not allow for cross-loadings. For both ESEM and CFA, only metric invariance could be achieved. Nevertheless, invariance levels beyond metric invariance are better achieved with ESEM within selected country clusters. Moreover, the existence of cross-loadings did not affect the relations between the dimensions of teachers’ self-efficacy and external constructs. Overall, this study shows that a conceptual overlap between the facets of self-efficacy exists and can be well-represented by ESEM. We further argue for the cross

  20. The Quest for Comparability: Studying the Invariance of the Teachers' Sense of Self-Efficacy (TSES) Measure across Countries.

    PubMed

    Scherer, Ronny; Jansen, Malte; Nilsen, Trude; Areepattamannil, Shaljan; Marsh, Herbert W

    2016-01-01

    Teachers' self-efficacy is an important motivational construct that is positively related to a variety of outcomes for both the teachers and their students. This study addresses challenges associated with the commonly used 'Teachers' Sense of Self-Efficacy (TSES)' measure across countries and provides a synergism between substantive research on teachers' self-efficacy and the novel methodological approach of exploratory structural equation modeling (ESEM). These challenges include adequately representing the conceptual overlap between the facets of self-efficacy in a measurement model (cross-loadings) and comparing means and factor structures across countries (measurement invariance). On the basis of the OECD Teaching and Learning International Survey (TALIS) 2013 data set comprising 32 countries (N = 164,687), we investigate the effects of cross-loadings in the TSES measurement model on the results of measurement invariance testing and the estimation of relations to external constructs (i.e., working experience, job satisfaction). To further test the robustness of our results, we replicate the 32-countries analyses for three selected sub-groups of countries (i.e., Nordic, East and South-East Asian, and Anglo-Saxon country clusters). For each of the TALIS 2013 participating countries, we found that the factor structure of the self-efficacy measure is better represented by ESEM than by confirmatory factor analysis (CFA) models that do not allow for cross-loadings. For both ESEM and CFA, only metric invariance could be achieved. Nevertheless, invariance levels beyond metric invariance are better achieved with ESEM within selected country clusters. Moreover, the existence of cross-loadings did not affect the relations between the dimensions of teachers' self-efficacy and external constructs. Overall, this study shows that a conceptual overlap between the facets of self-efficacy exists and can be well-represented by ESEM. We further argue for the cross

  1. [Levels of trace elements in the fruits and vegetables from the so-called Land of fires in Campania Region (Southern Italy)].

    PubMed

    Esposito, Mauro; Cavallo, Stefania; Rosato, Guido; Chiaravalle, Eugenio; Miedico, Oto; Pellicanò, Roberta; Soprano, Vittorio; Baldi, Loredana

    2016-01-01

    INTRODUZIONE: una vasta area compresa tra le province di Napoli e Caserta nella regione Campania ha negli ultimi anni attirato l'attenzione dei mass media a causa degli interramenti illeciti di rifiuti di varia origine nei campi o del loro abbandono lungo le strade. A tali pratiche illecite si aggiunge il fenomeno dei roghi incontrollati di questo materiale, motivo per il quale la zona è stata soprannominata "Terra dei fuochi". OBIETTIVI: ricerca di elementi in tracce presenti nei prodotti alimentari di origine vegetale prodotti nella Terra dei fuochi. DISEGNO E SETTING: piano di monitoraggio per il rilevamento dei livelli di alcuni metalli tossici ed essenziali nei vegetali coltivati in Campania nella Terra dei fuochi. La determinazione dei microelementi è stata effettuata dopo mineralizzazione della sostanza organica mediante microonde, utilizzando la spettrometria di massa a plasma induttivamente accoppiato (ICP-MS). RISULTATI: durante l'attività di monitoraggio sono stati raccolti 65 campioni di ortaggi e 49 campioni di frutta in 43 comuni rientranti nella Terra dei fuochi. Il contenuto medio di metalli tossici, cadmio e piombo nei prodotti ortofrutticoli è risultato ben lontano dai limiti massimi fissati dalla normativa europea. I valori delle concentrazioni sono significativamente inferiori rispetto a quanto riscontrato in zone ad alto impatto ambientale a causa della presenza di impianti industriali. CONCLUSIONI: la presenza di elementi tossici o potenzialmente tali nei campioni vegetali prodotti nella Terra dei fuochi è attribuibile a una varietà di fattori ambientali rilevanti (caratteristiche geologiche dell'area, inquinamento del suolo, dell'atmosfera e delle acque di irrigazione, pratiche illecite di smaltimento dei rifiuti industriali); non sembra, tuttavia, sussistere un rischio per la salute dei consumatori. Resta comunque l'allerta per la loro presenza nell'ambiente e la necessità che le attività di monitoraggio continuino.

  2. Measurement of excitation functions in alpha induced reactions on natCu

    NASA Astrophysics Data System (ADS)

    Shahid, Muhammad; Kim, Kwangsoo; Kim, Guinyun; Zaman, Muhammad; Nadeem, Muhammad

    2015-09-01

    The excitation functions of 66,67,68Ga, 62,63,65Zn, 61,64Cu, and 58,60Co radionuclides in the natCu(α, x) reaction were measured in the energy range from 15 to 42 MeV by using a stacked-foil activation method at the MC-50 cyclotron of the Korean Institute of Radiological and Medical Sciences. The measured results were compared with the literature data as well as the theoretical values obtained from the TENDL-2013 and TENDL-2014 libraries based on the TALYS-1.6 code. The integral yields for thick targets of the produced radionuclides were also determined from the measured excitation functions and the stopping power of natural copper.

  3. Study of activation cross sections of deuteron induced reactions on barium. Production of 131Cs, 133Ba

    NASA Astrophysics Data System (ADS)

    Tárkányi, F.; Hermanne, A.; Ditrói, F.; Takács, S.; Szücs, Z.; Brezovcsik, K.

    2018-01-01

    In the frame of a systematic study of deuteron induced activation processes on middle mass elements, excitation functions of the natBa(d,x) 135,133,132La, 135m,133m,133mg,131mgBa, 136mg,134mg,132,129Cs reactions were measured up to 50 MeV for the first time. Cross sections were measured with the activation method using a stacked foil irradiation technique followed by HPGe γ-ray spectrometry. A comparison with the results of the nuclear model TALYS code (reported in the TENDL-2015 library) was done. The potential use of the deuteron induced reactions on Ba for applications (131Cs and 131Ba production) is discussed.

  4. Activation cross-sections of proton induced reactions on vanadium in the 37-65 MeV energy range

    NASA Astrophysics Data System (ADS)

    Ditrói, F.; Tárkányi, F.; Takács, S.; Hermanne, A.

    2016-08-01

    Experimental excitation functions for proton induced reactions on natural vanadium in the 37-65 MeV energy range were measured with the activation method using a stacked foil irradiation technique. By using high resolution gamma spectrometry cross-section data for the production of 51,48Cr, 48V, 48,47,46,44m,44g,43Sc and 43,42K were determined. Comparisons with the earlier published data are presented and results predicted by different theoretical codes (EMPIRE and TALYS) are included. Thick target yields were calculated from a fit to our experimental excitation curves and compared with the earlier experimental yield data. Depth distribution curves to be used for thin layer activation (TLA) are also presented.

  5. Experimental cross-sections for proton induced nuclear reactions on mercury up to 65 MeV

    NASA Astrophysics Data System (ADS)

    Hermanne, A.; Tárkányi, F.; Takács, S.; Ditrói, F.; Szücs, Z.; Brezovcsik, K.

    2016-07-01

    Cross-sections for formation of activation products induced by protons on natural mercury targets were measured. Results for 196m,196g,197g(cum), 198m,198g,199g(cum), 200g(cum), 201,202Tl, 194g(cum), 195g(cum), 196g(cum), 198m,199g(cum) Au and 195m,197m,203Hg are presented up to 65 MeV incident particle energy, many of these for the first time. The experimental data are compared with literature values and with the predictions of the TALYS 1.6 code (results taken from TENDL-2015 on-line library), thick target yields were derived and possible applications in biomedical sciences are discussed.

  6. Tungsten fragmentation in nuclear reactions induced by high-energy cosmic-ray protons

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chechenin, N. G., E-mail: chechenin@sinp.msu.ru; Chuvilskaya, T. V.; Shirokova, A. A.

    2015-01-15

    Tungsten fragmentation arising in nuclear reactions induced by cosmic-ray protons in space-vehicle electronics is considered. In modern technologies of integrated circuits featuring a three-dimensional layered architecture, tungsten is frequently used as a material for interlayer conducting connections. Within the preequilibrium model, tungsten-fragmentation features, including the cross sections for the elastic and inelastic scattering of protons of energy between 30 and 240 MeV; the yields of isotopes and isobars; their energy, charge, and mass distributions; and recoil energy spectra, are calculated on the basis of the TALYS and EMPIRE-II-19 codes. It is shown that tungsten fragmentation affects substantially forecasts of failuresmore » of space-vehicle electronics.« less

  7. Thorium-232 fission induced by light charged particles up to 70 MeV

    NASA Astrophysics Data System (ADS)

    Métivier, Vincent; Duchemin, Charlotte; Guertin, Arnaud; Michel, Nathalie; Haddad, Férid

    2017-09-01

    Studies have been devoted to the production of alpha emitters for medical application in collaboration with the GIP ARRONAX that possesses a high energy and high intensity multi-particle cyclotron. The productions of Ra-223, Ac-225 and U-230 have been investigated from the Th-232(p,x) and Th-232(d,x) reactions using the stacked-foils method and gamma spectrometry measurements. These reactions have led to the production of several fission products, including some with a medical interest like Mo-99, Cd-115g and I-131. This article presents cross section data of fission products obtained from these undedicated experiments. These data have been also compared with the TALYS code results.

  8. Neutron scattering cross section measurements for Fe 56

    DOE PAGES

    Ramirez, A. P. D.; Vanhoy, J. R.; Hicks, S. F.; ...

    2017-06-09

    Elastic and inelastic differential cross sections for neutron scattering from 56Fe have been measured for several incident energies from 1.30 to 7.96 MeV at the University of Kentucky Accelerator Laboratory. Scattered neutrons were detected using a C 6D 6 liquid scintillation detector using pulse-shape discrimination and time-of-flight techniques. The deduced cross sections have been compared with previously reported data, predictions from evaluation databases ENDF, JENDL, and JEFF, and theoretical calculations performed using different optical model potentials using the TALYS and EMPIRE nuclear reaction codes. The coupled-channel calculations based on the vibrational and soft-rotor models are found to describe the experimentalmore » (n,n 0) and (n,n 1) cross sections well.« less

  9. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ramirez, A. P. D.; Vanhoy, J. R.; Hicks, S. F.

    Elastic and inelastic differential cross sections for neutron scattering from 56Fe have been measured for several incident energies from 1.30 to 7.96 MeV at the University of Kentucky Accelerator Laboratory. Scattered neutrons were detected using a C 6D 6 liquid scintillation detector using pulse-shape discrimination and time-of-flight techniques. The deduced cross sections have been compared with previously reported data, predictions from evaluation databases ENDF, JENDL, and JEFF, and theoretical calculations performed using different optical model potentials using the TALYS and EMPIRE nuclear reaction codes. The coupled-channel calculations based on the vibrational and soft-rotor models are found to describe the experimentalmore » (n,n 0) and (n,n 1) cross sections well.« less

  10. Isomeric ratio measurements for the radiative neutron capture 176Lu(n ,γ ) at the LANL DANCE facility

    NASA Astrophysics Data System (ADS)

    Denis-Petit, D.; Roig, O.; Méot, V.; Morillon, B.; Romain, P.; Jandel, M.; Kawano, T.; Vieira, D. J.; Bond, E. M.; Bredeweg, T. A.; Couture, A. J.; Haight, R. C.; Keksis, A. L.; Rundberg, R. S.; Ullmann, J. L.

    2016-11-01

    The isomeric ratios for the neutron capture reaction 176Lu(n ,γ ) to the Jπ=5 /2- , 761.7 keV, T1 /2=32.8 ns and the Jπ=15 /2+ , 1356.9 keV, T1 /2=11.1 ns levels of 177Lu have been measured for the first time. The experiment was carried out with the Detector for Advanced Neutron Capture Experiments (DANCE) at the Los Alamos National Laboratory. Measured isomeric ratios are compared with talys calculations using different models for photon strength functions, level densities, and optical potentials. In order to reproduce the experimental γ -ray spectra, a low-energy resonance must be added in the photon strength function used in our Hauser-Feshbach calculations.

  11. Neutron scattering cross section measurements for 56Fe

    NASA Astrophysics Data System (ADS)

    Ramirez, A. P. D.; Vanhoy, J. R.; Hicks, S. F.; McEllistrem, M. T.; Peters, E. E.; Mukhopadhyay, S.; Harrison, T. D.; Howard, T. J.; Jackson, D. T.; Lenzen, P. D.; Nguyen, T. D.; Pecha, R. L.; Rice, B. G.; Thompson, B. K.; Yates, S. W.

    2017-06-01

    Elastic and inelastic differential cross sections for neutron scattering from 56Fe have been measured for several incident energies from 1.30 to 7.96 MeV at the University of Kentucky Accelerator Laboratory. Scattered neutrons were detected using a C6D6 liquid scintillation detector using pulse-shape discrimination and time-of-flight techniques. The deduced cross sections have been compared with previously reported data, predictions from evaluation databases ENDF, JENDL, and JEFF, and theoretical calculations performed using different optical model potentials using the talys and empire nuclear reaction codes. The coupled-channel calculations based on the vibrational and soft-rotor models are found to describe the experimental (n ,n0 ) and (n ,n1 ) cross sections well.

  12. Cross sections of deuteron induced reactions on (nat)Sm for production of the therapeutic radionuclide ¹⁴⁵Sm and ¹⁵³Sm.

    PubMed

    Tárkányi, F; Hermanne, A; Takács, S; Ditrói, F; Csikai, J; Ignatyuk, A V

    2014-09-01

    At present, targeted radiotherapy (TR) is acknowledged to have great potential in oncology. A large list of interesting radionuclides is identified, including several radioisotopes of lanthanides, amongst them (145)Sm and (153)Sm. In this work the possibility of their production at a cyclotron was investigated using a deuteron beam and a samarium target. The excitation functions of the (nat)Sm(d,x)(145,153)Sm reactions were determined for deuteron energies up to 50 MeV using the stacked-foil technique and high-resolution γ-ray spectrometry. The measured cross sections and the contributing reactions were analyzed by comparison with results of the ALICE, EMPIRE and TALYS nuclear reaction codes. A short overview and comparison of possible production routes is given. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Experimentally constrained ( p , γ ) Y 89 and ( n , γ ) Y 89 reaction rates relevant to p -process nucleosynthesis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Larsen, A. C.; Guttormsen, M.; Schwengner, R.

    The nuclear level density and the g-ray strength function have been extracted for 89Y, using the Oslo Method on 89Y(p,p'γ) 89Y coincidence data. The g-ray strength function displays a low-energy enhancement consistent with previous observations in this mass region ( 93-98Mo). Shell-model calculations give support that the observed enhancement is due to strong, low-energy M1 transitions at high excitation energies. The data were further used as input for calculations of the 88Sr(p,γ) 89Y and 88Y(n,γ) 89Y cross sections with the TALYS reaction code. Lastly, comparison with cross-section data, where available, as well as with values from the BRUSLIB library, showsmore » a satisfying agreement.« less

  14. Integral cross section measurement of the U 235 ( n , n ' ) U 235 m reaction in a pulsed reactor

    DOE PAGES

    Bélier, G.; Bond, E. M.; Vieira, D. J.; ...

    2015-04-08

    The integral measurement of the neutron inelastic cross section leading to the 26-minute half-life 235mU isomer in a fission-like neutron spectrum is presented. The experiment has been performed at a pulsed reactor, where the internal conversion decay of the isomer was measured using a dedicated electron detector after activation. The sample preparation, efficiency measurement, irradiation, radiochemistry purification, and isomer decay measurement will be presented. We determined the integral cross section for the ²³⁵U(n,n') 235mU reaction to be 1.00±0.13b. This result supports an evaluation performed with TALYS-1.4 code with respect to the isomer excitation as well as the total neutron inelasticmore » scattering cross section.« less

  15. Activation cross-section measurement of proton induced reactions on cerium

    NASA Astrophysics Data System (ADS)

    Tárkányi, F.; Hermanne, A.; Ditrói, F.; Takács, S.; Spahn, I.; Spellerberg, S.

    2017-12-01

    In the framework of a systematic study of proton induced nuclear reactions on lanthanides we have measured the excitation functions on natural cerium for the production of 142,139,138m,137Pr, 141,139,137m,137g,135Ce and 133La up to 65 MeV proton energy using the activation method with stacked-foil irradiation technique and high-resolution γ-ray spectrometry. The cross-sections of the investigated reactions were compared with the data retrieved from the TENDL-2014 and TENDL-2015 libraries, based on the latest version of the TALYS code system. No earlier experimental data were found in the literature. The measured cross-section data are important for further improvement of nuclear reaction models and for practical applications in nuclear medicine, other labeling and activation studies.

  16. Alpha-induced reactions on selenium between 11 and 15 MeV

    NASA Astrophysics Data System (ADS)

    Fiebiger, Stefan; Slavkovská, Zuzana; Giesen, Ulrich; Göbel, Kathrin; Heftrich, Tanja; Heiske, Annett; Reifarth, René; Schmidt, Stefan; Sonnabend, Kerstin; Thomas, Benedikt; Weigand, Mario

    2017-07-01

    The production of 77,79,85,85m Kr and 77Br via the reaction Se(α ,x) was investigated between {E}α =11 and 15 MeV using the activation technique. The irradiation of natural selenium targets on aluminum backings was conducted at the Physikalisch-Technische Bundesanstalt (PTB) in Braunschweig, Germany. The spectroscopic analysis of the reaction products was performed using a high-purity germanium detector located at PTB and a low energy photon spectrometer detector at the Goethe University Frankfurt, Germany. Thick-target yields were determined. The corresponding energy-dependent production cross sections of 77,79,85,85m Kr and 77Br were calculated from the thick-target yields. Good agreement between experimental data and theoretical predictions using the TALYS-1.6 code was found.

  17. Study of activation cross-sections of deuteron induced reactions on rhodium up to 40 MeV

    NASA Astrophysics Data System (ADS)

    Ditrói, F.; Tárkányi, F.; Takács, S.; Hermanne, A.; Yamazaki, H.; Baba, M.; Mohammadi, A.; Ignatyuk, A. V.

    2011-09-01

    In the frame of a systematic study of the activation cross-sections of deuteron induced nuclear reactions, excitation functions of the 103Rh(d,x) 100,101,103Pd, 100g,101m,101g,102m,102gRh and 103gRu reactions were determined up to 40 MeV. Cross-sections were measured with the activation method using a stacked foil irradiation technique. Excitation functions of the contributing reactions were calculated using the ALICE-IPPE, EMPIRE-II and TALYS codes. From the measured cross-section data integral production yields were calculated and compared with experimental integral yield data reported in the literature. From the measured cross-sections and previous data, activation curves were deduced to support thin layer activation (TLA) on rhodium and Rh containing alloys.

  18. Sharing a disparate landscape

    NASA Astrophysics Data System (ADS)

    Ali-Khan, Carolyne

    2010-06-01

    Working across boundaries of power, identity, and political geography is fraught with difficulties and contradictions. In Tali Tal and Iris Alkaher's, " Collaborative environmental projects in a multicultural society: Working from within separate or mutual landscapes?" the authors describe their efforts to do this in the highly charged atmosphere of Israel. This forum article offers a response to their efforts. Writing from a framework of critical pedagogy, I use the concepts of space and time to anchor my analysis, as I examine the issue of power in this Jew/Arab collaborative environmental project. This response problematizes "sharing" in a landscape fraught with disparities. It also looks to further Tal and Alkaher's work by geographically and politically grounding it in the broader current conflict and by juxtaposing sustainability with equity.

  19. Experimentally constrained ( p , γ ) Y 89 and ( n , γ ) Y 89 reaction rates relevant to p -process nucleosynthesis

    DOE PAGES

    Larsen, A. C.; Guttormsen, M.; Schwengner, R.; ...

    2016-04-21

    The nuclear level density and the g-ray strength function have been extracted for 89Y, using the Oslo Method on 89Y(p,p'γ) 89Y coincidence data. The g-ray strength function displays a low-energy enhancement consistent with previous observations in this mass region ( 93-98Mo). Shell-model calculations give support that the observed enhancement is due to strong, low-energy M1 transitions at high excitation energies. The data were further used as input for calculations of the 88Sr(p,γ) 89Y and 88Y(n,γ) 89Y cross sections with the TALYS reaction code. Lastly, comparison with cross-section data, where available, as well as with values from the BRUSLIB library, showsmore » a satisfying agreement.« less

  20. Proton and deuteron induced reactions on natGa: Experimental and calculated excitation functions

    NASA Astrophysics Data System (ADS)

    Hermanne, A.; Adam-Rebeles, R.; Tárkányi, F.; Takács, S.; Ditrói, F.

    2015-09-01

    Cross-sections for reactions on natGa, induced by protons (up to 65 MeV) and deuterons (up to 50 MeV), producing γ-emitting radionuclides with half-lives longer than 1 h were measured in a stacked-foil irradiation using thin Ga-Ni alloy (70-30%) targets electroplated on Cu or Au backings. Excitation functions for generation of 68,69Ge, 66,67,68,72Ga and 65,69mZn on natGa are discussed, relative to the monitor reactions natAl(d,x)24,22Na, natAl(p,x)24,22Na, natCu(p,x)62Zn and natNi(p,x)57Ni. The results are compared to our earlier measurements, the scarce literature values and to the results of the code TALYS 1.6 (online database TENDL-2014).

  1. Description of Differential Cross Sections for 63Cu + p Nuclear Reactions Induced by High-Energy Cosmic-Ray Protons

    NASA Astrophysics Data System (ADS)

    Chuvilskaya, T. V.; Shirokova, A. A.

    2018-03-01

    The results of calculation of 63Cu + p differential cross sections at incident-proton energies between 10 and 200 MeV and a comparative analysis of these results are presented as a continuation of the earlier work of our group on developing methods for calculating the contribution of nuclear reactions to radiative effects arising in the onboard spacecraft electronics under the action of high-energy cosmic-ray protons on 63Cu nuclei (generation of single-event upsets) and as a supplement to the earlier calculations performed on the basis of the TALYS code in order to determine elastic- and inelastic-scattering cross sections and charge, mass, and energy distributions of recoil nuclei (heavy products of the 63Cu + p nuclear reaction). The influence of various mechanisms of the angular distributions of particles emitted in the 63Cu + p nuclear reaction is also discussed.

  2. Development of iPS (induced pluripotent stem cells) using natural product from extract of fish oocyte to provide stem cell for regenerative therapy

    NASA Astrophysics Data System (ADS)

    Meilany, Sofy; Firdausiyah, Qonitha S.; Naroeni, Aroem

    2017-02-01

    In this study, we developed a method to induce pluripotency of adult cells (fibroblast) into stem cells using a natural product, extract of fish oocyte, by comparing the extract concentration, 1 mg/ml and 2 mg/ml. The analyses were done by measuring the Nanog gene expression in cells using qPCR and detecting fibroblast marker anti H2-KK. The results revealed existence of a colony of stem cells in the cell that was induced with 2mg/ml concentration of oocytes. Nanoggene expression was analyzed by qPCR and the results showed expression of Nanog gene compared to the control. Analysis of result of fibroblast using Tali Cytometer and anti H2KK antibody showed loss of expression of Anti H2KK meaning there was transformation from fibroblast type cell to pluripotent cell type.

  3. Alpha particle induced reactions on natCr up to 39 MeV: Experimental cross-sections, comparison with theoretical calculations and thick target yields for medically relevant 52gFe production

    NASA Astrophysics Data System (ADS)

    Hermanne, A.; Adam Rebeles, R.; Tárkányi, F.; Takács, S.

    2015-08-01

    Thin natCr targets were obtained by electroplating, using 23.75 μm Cu foils as backings. In five stacked foil irradiations, followed by high resolution gamma spectroscopy, the cross sections for production of 52gFe, 49,51cumCr, 52cum,54,56cumMn and 48cumV in Cr and 61Cu,68Ga in Cu were measured up to 39 MeV incident α-particle energy. Reduced uncertainty is obtained by simultaneous remeasurement of the natCu(α,x)67,66Ga monitor reactions over the whole energy range. Comparisons with the scarce literature values and results from the TENDL-2013 on-line library, based on the theoretical code family TALYS-1.6, were made. A discussion of the production routes for 52gFe with achievable yields and contamination rates was made.

  4. Extension of the energy range of the experimental activation cross-sections data of longer-lived products of proton induced nuclear reactions on dysprosium up to 65MeV.

    PubMed

    Tárkányi, F; Ditrói, F; Takács, S; Hermanne, A; Ignatyuk, A V

    2015-04-01

    Activation cross-sections data of longer-lived products of proton induced nuclear reactions on dysprosium were extended up to 65MeV by using stacked foil irradiation and gamma spectrometry experimental methods. Experimental cross-sections data for the formation of the radionuclides (159)Dy, (157)Dy, (155)Dy, (161)Tb, (160)Tb, (156)Tb, (155)Tb, (154m2)Tb, (154m1)Tb, (154g)Tb, (153)Tb, (152)Tb and (151)Tb are reported in the 36-65MeV energy range, and compared with an old dataset from 1964. The experimental data were also compared with the results of cross section calculations of the ALICE and EMPIRE nuclear model codes and of the TALYS nuclear reaction model code as listed in the latest on-line libraries TENDL 2013. Copyright © 2015. Published by Elsevier Ltd.

  5. Effects of positioning on radiographic measurements of ankle morphology: a computerized tomography-based simulation study

    PubMed Central

    2013-01-01

    Background Measurements of the morphology of the ankle joint, performed mostly for surgical planning of total ankle arthroplasty and for collecting data for total ankle prosthesis design, are often made on planar radiographs, and therefore can be very sensitive to the positioning of the joint during imaging. The current study aimed to compare ankle morphological measurements using CT-generated 2D images with gold standard values obtained from 3D CT data; to determine the sensitivity of the 2D measurements to mal-positioning of the ankle during imaging; and to quantify the repeatability of the 2D measurements under simulated positioning conditions involving random errors. Method Fifty-eight cadaveric ankles fixed in the neutral joint position (standard pose) were CT scanned, and the data were used to simulate lateral and frontal radiographs under various positioning conditions using digitally reconstructed radiographs (DRR). Results and discussion In the standard pose for imaging, most ankle morphometric parameters measured using 2D images were highly correlated (R > 0.8) to the gold standard values defined by the 3D CT data. For measurements made on the lateral views, the only parameters sensitive to rotational pose errors were longitudinal distances between the most anterior and the most posterior points of the tibial mortise and the tibial profile, which have important implications for determining the optimal cutting level of the bone during arthroplasty. Measurements of the trochlea tali width on the frontal views underestimated the standard values by up to 31.2%, with only a moderate reliability, suggesting that pre-surgical evaluations based on the trochlea tali width should be made with caution in order to avoid inappropriate selection of prosthesis sizes. Conclusions While highly correlated with 3D morphological measurements, some 2D measurements were affected by the bone poses in space during imaging, which may affect surgical decision-making in total

  6. Analysis of isomeric ratios for medium-mass nuclei

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Danagulyan, A. S.; Hovhannisyan, G. H., E-mail: hov-gohar@ysu.am; Bakhshiyan, T. M.

    Values of the isomeric ratios for product nuclei originating from simple charge-exchange reactions were analyzed. The cross sections for the formation of product nuclei in ground and isomeric states were calculated with the aid of the TALYS 1.4 and EMPIRE 3.2 codes. The calculated values of the isomeric ratios were compared with their experimental counterparts taken from the EXFOR database. For the {sup 86,87}Y, {sup 94,95,96,99}Tc, and {sup 44}Sc nuclei, the experimental values of the isomeric ratios exceed the respective calculated values. The nuclei in question feature weak deformations and have high-spin yrast lines and rotational bands. The possible reasonmore » behind the discrepancy between theoretical and experimental isomeric ratios is that the decay of yrast states leads with a high probability to the formation of isomeric states of detected product nuclei.« less

  7. Activation cross section and isomeric cross section ratios for the (n ,2 n ) reaction on 153Eu

    NASA Astrophysics Data System (ADS)

    Luo, Junhua; Jiang, Li; Li, Suyuan

    2017-10-01

    The 153Eu(n ,2 n ) m1,m2,g152Eu cross section was measured by means of the activation technique at three neutron energies in the range 13-15 MeV. The quasimonoenergetic neutron beam was formed via the 3H(d ,n ) 4He reaction, in the Pd-300 Neutron Generator at the Chinese Academy of Engineering Physics (CAEP). The activities induced in the reaction products were measured using high-resolution γ-ray spectroscopy. The cross section of the population of the second high-spin (8-) isomeric state was measured along with the reaction cross section populating both the ground (3-) and the first isomeric state (0-). Cross sections were also evaluated theoretically using the numerical code TALYS-1.8, with different level density options at neutron energies varying from the reaction threshold to 20 MeV. Results are discussed and compared with the corresponding literature.

  8. Measurement of excitation functions and analysis of isomeric population in some reactions induced by proton on natural indium at low energy

    NASA Astrophysics Data System (ADS)

    Muhammed Shan, P. T.; Musthafa, M. M.; Najmunnisa, T.; Mohamed Aslam, P.; Rajesh, K. K.; Hajara, K.; Surendran, P.; Nair, J. P.; Shanbagh, Anil; Ghugre, S.

    2018-06-01

    The excitation functions for reaction residues populated via 115In(p , p) 115 mIn, 115In(p , pn) 114 mIn, 115In(p , p 2 n) 113 mIn, 113In(p , p) 113 mIn, 115In(p , nα) 111 mCd, 115In(p , 3 n) 113Sn and 113In(p , n) 113Sn channels were measured over the proton energy range of 8-22 MeV using stacked foil activation technique. Theoretical analysis of the data were performed within the framework of two statistical model codes EMPIRE-3.2 and TALYS-1.8. Isomeric cross section ratio for isomeric pairs m,g 115In, m,g 114In, m,g 113In, 113Sn m,g and m,g 111Cd were determined for the first time. The dependence of isomeric cross section ratio on various factors are analysed.

  9. Excitation functions for (d,x) reactions on (133)Cs up to Ed=40MeV.

    PubMed

    Tárkányi, F; Ditrói, F; Takács, S; Hermanne, A; Baba, M; Ignatyuk, A V

    2016-04-01

    In the frame of a systematic study of excitation functions of deuteron induced reactions the excitation functions of the (133)Cs(d,x)(133m,133mg,131mg)Ba,(134,)(132)Cs and (12)(9m)Xe nuclear reactions were measured up to 40MeV deuteron energies by using the stacked foil irradiation technique and γ-ray spectroscopy of activated samples. The results were compared with calculations performed with the theoretical nuclear reaction codes ALICE-IPPE-D, EMPIRE II-D and TALYS calculation listed in the TENDL-2014 library. A moderate agreement was obtained. Based on the integral yields deduced from our measured cross sections, production of (131)Cs via the (133)Cs(d,4n)(131)Ba→(131)Cs reaction and (133)Ba via (133)Cs(d,2n) reactions is discussed in comparison with other charged particle production routes. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Determination of the cross section for (n,p) and (n,α) reactions on (165)Ho at 13.5 and 14.8MeV.

    PubMed

    Luo, Junhua; An, Li; Jiang, Li; He, Long

    2015-04-01

    Activation cross-sections for the (165)Ho(n,p)(165)Dy and (165)Ho(n,α)(162)Tb reactions were measured by means of the activation method at 13.5 and 14.8MeV, to resolve inconsistencies in existing data. A neutron beam produced via the (3)H(d,n)(4)He reaction was used. Statistical model calculations were performed using the nuclear-reaction codes EMPIRE-3.2 Malta and TALYS-1.6 with default parameters, at neutron energies varying from the reaction threshold to 20MeV. Results are also discussed and compared with some corresponding values found in the literature. The calculational results on the (165)Ho(n,α)(162)Tb reaction agreed fairly well with experimental data, but there were large discrepancies in the results for the (165)Ho(n,p)(165)Dy reaction. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Activation cross-sections of proton induced reactions on natHf in the 38-65 MeV energy range: Production of 172Lu and of 169Yb

    NASA Astrophysics Data System (ADS)

    Tárkányi, F.; Hermanne, A.; Ditrói, F.; Takács, S.; Ignatyuk, A. V.

    2018-07-01

    In the frame of a systematical study of light ion induced nuclear reactions on hafnium, activation cross sections for proton induced reactions were investigated. Excitation functions were measured in the 38-65 MeV energy range for the natHf(p,xn)180g,177,176,175,173Ta, natHf(p,x)180m,179m,175,173,172,171Hf, 177g,173,172,171,170,169Lu and natHf(p,x)169Yb reactions by using the activation method, combining stacked foil irradiation and off line gamma ray spectroscopy. The experimental results are compared with earlier results in the overlapping energy range, and with the theoretical predictions of the ALICE IPPE and EMPIRE theoretical codes and of the TALYS code reported in the TENDL-2015 and TENDL-2017 libraries. The production routes of 172Lu (and its parent 172Hf) and of 169Yb are reviewed.

  12. Determination of neutron capture cross sections of 232Th at 14.1 MeV and 14.8 MeV using the neutron activation method

    NASA Astrophysics Data System (ADS)

    Lan, Chang-Lin; Zhang, Yi; Lv, Tao; Xie, Bao-Lin; Peng, Meng; Yao, Ze-En; Chen, Jin-Gen; Kong, Xiang-Zhong

    2017-04-01

    The 232Th(n, γ)233Th neutron capture reaction cross sections were measured at average neutron energies of 14.1 MeV and 14.8 MeV using the activation method. The neutron flux was determined using the monitor reaction 27Al(n,α)24Na. The induced gamma-ray activities were measured using a low background gamma ray spectrometer equipped with a high resolution HPGe detector. The experimentally determined cross sections were compared with the data in the literature, and the evaluated data of ENDF/B-VII.1, JENDL-4.0u+, and CENDL-3.1. The excitation functions of the 232Th(n,γ)233Th reaction were also calculated theoretically using the TALYS1.6 computer code. Supported by Chinese TMSR Strategic Pioneer Science and Technology Project-The Th-U Fuel Physics Term (XDA02010100) and National Natural Science Foundation of China (11205076, 21327801)

  13. How School Context and Educator Characteristics Predict Distributed Leadership: A Hierarchical Structural Equation Model with 2013 TALIS Data

    ERIC Educational Resources Information Center

    Liu, Yan; Bellibas, Mehmet Sukru; Printy, Susan

    2018-01-01

    Distributed leadership is a dynamic process and reciprocal interaction of the leader, the subordinates and the situation. This research was inspired by the theoretical framework of Spillane in order to contextualize distributed leadership and compare the variations using the Teaching and Learning International Survey 2013 data. The two-level…

  14. Neutron-capture cross-section measurements of 74Ge and 76Ge in the energy region 0.4-14.8 MeV for neutrinoless double β decay applications

    NASA Astrophysics Data System (ADS)

    Bhike, Megha; Tornow, Werner

    2013-10-01

    Fast neutron capture cross sections for the reactions 74Ge(n, γ)75Ge and 76Ge(n, γ)77Ge have been measured in the neutron energy region 0.4-14.8 MeV with the activation method. The results are important to identify backgrounds in the neutrinoless double- β decay experiments GERDA and MAJORANA, which use germanium as both source and detector. Isotopically enriched targets which consisted of 86% of 76Ge and 14% of 74Ge were irradiated with mono-energetic neutrons produced via 3H(p,n)3He, 2H(d,n)3He and 3H(d,n)4He reactions. The cross sections were determined relative to 197Au(n, γ)198Au, 115In(n,n')115mIn and 197Au(n,2n)196Au standard cross sections. The activities of the products were measured using high-resolution γ-ray spctroscopy. The present results are compared with the evaluated data from ENDF/B-VII.1 and TALYS.

  15. RAINIER: A simulation tool for distributions of excited nuclear states and cascade fluctuations

    NASA Astrophysics Data System (ADS)

    Kirsch, L. E.; Bernstein, L. A.

    2018-06-01

    A new code has been developed named RAINIER that simulates the γ-ray decay of discrete and quasi-continuum nuclear levels for a user-specified range of energy, angular momentum, and parity including a realistic treatment of level spacing and transition width fluctuations. A similar program, DICEBOX, uses the Monte Carlo method to simulate level and width fluctuations but is restricted in its initial level population algorithm. On the other hand, modern reaction codes such as TALYS and EMPIRE populate a wide range of states in the residual nucleus prior to γ-ray decay, but do not go beyond the use of deterministic functions and therefore neglect cascade fluctuations. This combination of capabilities allows RAINIER to be used to determine quasi-continuum properties through comparison with experimental data. Several examples are given that demonstrate how cascade fluctuations influence experimental high-resolution γ-ray spectra from reactions that populate a wide range of initial states.

  16. RAINIER: A simulation tool for distributions of excited nuclear states and cascade fluctuations

    DOE PAGES

    Kirsch, L. E.; Bernstein, L. A.

    2018-03-04

    In this paper, a new code has been developed named RAINIER that simulates the γ-ray decay of discrete and quasi-continuum nuclear levels for a user-specified range of energy, angular momentum, and parity including a realistic treatment of level spacing and transition width fluctuations. A similar program, DICEBOX, uses the Monte Carlo method to simulate level and width fluctuations but is restricted in its initial level population algorithm. On the other hand, modern reaction codes such as TALYS and EMPIRE populate a wide range of states in the residual nucleus prior to γ-ray decay, but do not go beyond the usemore » of deterministic functions and therefore neglect cascade fluctuations. This combination of capabilities allows RAINIER to be used to determine quasi-continuum properties through comparison with experimental data. Finally, several examples are given that demonstrate how cascade fluctuations influence experimental high-resolution γ-ray spectra from reactions that populate a wide range of initial states.« less

  17. RAINIER: A simulation tool for distributions of excited nuclear states and cascade fluctuations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kirsch, L. E.; Bernstein, L. A.

    In this paper, a new code has been developed named RAINIER that simulates the γ-ray decay of discrete and quasi-continuum nuclear levels for a user-specified range of energy, angular momentum, and parity including a realistic treatment of level spacing and transition width fluctuations. A similar program, DICEBOX, uses the Monte Carlo method to simulate level and width fluctuations but is restricted in its initial level population algorithm. On the other hand, modern reaction codes such as TALYS and EMPIRE populate a wide range of states in the residual nucleus prior to γ-ray decay, but do not go beyond the usemore » of deterministic functions and therefore neglect cascade fluctuations. This combination of capabilities allows RAINIER to be used to determine quasi-continuum properties through comparison with experimental data. Finally, several examples are given that demonstrate how cascade fluctuations influence experimental high-resolution γ-ray spectra from reactions that populate a wide range of initial states.« less

  18. Activation cross section and isomeric cross-section ratio for the 151Eu(n,2n)150m,gEu process

    NASA Astrophysics Data System (ADS)

    Luo, Junhua; Li, Suyuan; Jiang, Li

    2018-07-01

    The cross sections of 151Eu(n,2n)150m,gEu reactions and their isomeric cross section ratios σm/σt have been measured experimentally. Cross sections are measured, relative to a reference 93Nb(n,2n)92mNb reaction cross section, by means of the activation technique at three neutron energies 13.5, 14.1, and 14.8 MeV. Monoenergetic neutron beams were formed via the 3H(d,n)4He reaction and both Eu2O3 samples and Nb monitor foils were activated together to determine the reaction cross section and the incident neutron flux. The activities induced in the reaction products were measured using high-resolution gamma ray spectroscopy. Cross sections were also evaluated theoretically using the numerical nuclear model code, TALYS-1.8 with different level density options at neutron energies varying from the reaction threshold to 20 MeV. Results are discussed and compared with the corresponding literature.

  19. Activation cross section and isomeric cross section ratio for the 76Ge(n,2n)75m,gGe process

    NASA Astrophysics Data System (ADS)

    Luo, Junhua; Jiang, Li; Wang, Xinxing

    2018-04-01

    We measured neutron-induced reaction cross sections for the 76Ge(n,2n)75m,gGe reactions and their isomeric cross section ratios σm/σg at three neutron energies between 13 and 15MeV by an activation and off-line γ-ray spectrometric technique using the K-400 Neutron Generator at the Chinese Academy of Engineering Physics (CAEP). Ge samples and Nb monitor foils were activated together to determine the reaction cross section and the incident neutron flux. The monoenergetic neutron beams were formed via the 3H( d, n)4He reaction. The pure cross section of the ground state was derived from the absolute cross section of the metastable state and the residual nuclear decay analysis. The cross sections were also calculated using the nuclear model code TALYS-1.8 with different level density options at neutron energies varying from the reaction threshold to 20MeV. Results are discussed and compared with the corresponding literature data.

  20. 64Cu, a powerful positron emitter for immunoimaging and theranostic: Production via natZnO and natZnO-NPs.

    PubMed

    Karimi, Zahra; Sadeghi, Mahdi; Mataji-Kojouri, Naimeddin

    2018-07-01

    64 Cu is one of the most beneficial radionuclide that can be used as a theranostic agent in Positron Emission Tomography (PET) imaging. In this current work, 64 Cu was produced with zinc oxide nanoparticles ( nat ZnONPs) and zinc oxide powder ( nat ZnO) via the 64 Zn(n,p) 64 Cu reaction in Tehran Research Reactor (TRR) and the activity values were compared with each other. The theoretical activity of 64 Cu also was calculated with MCNPX-2.6 and the cross sections of this reaction were calculated by using TALYS-1.8, EMPIRE-3.2.2 and ALICE/ASH nuclear codes and were compared with experimental values. Transmission Electronic Microscopy (TEM), Scanning Electronic Microscopy (SEM) and X-Ray Diffraction (XRD) analysis were used for samples characterizations. From these results, it's concluded that 64 Cu activity value with nanoscale target was achieved more than the bulk state target and had a good adaptation with the MCNPX result. Copyright © 2018 Elsevier Ltd. All rights reserved.

  1. Calculation of Excitation Function of Some Structural Fusion Material for (n, p) Reactions up to 25 MeV

    NASA Astrophysics Data System (ADS)

    Reshid, Tarik S.

    2013-04-01

    Fusion serves an inexhaustible energy for humankind. Although there have been significant research and development studies on the inertial and magnetic fusion reactor technology, Furthermore, there are not radioactive nuclear waste problems in the fusion reactors. In this study, (n, p) reactions for some structural fusion materials such as 27Al, 51V, 52Cr, 55Mn and 56Fe have been investigated. The new calculations on the excitation functions of 27 Al(n, p) 27 Mg, 51 V(n, p) 51 Ti, 52 Cr(n, p) 52 V, 55 Mn(n, p) 55 Cr and 56 Fe(n, p) 56 Mn reactions have been carried out up to 30 MeV incident neutron energy. Statistical model calculations, based on the Hauser-Feshbach formalism, have been carried out using the TALYS-1.0 and were compared with available experimental data in the literature and with ENDF/B-VII, T = 300 K; JENDL-3.3, T = 300 K and JEFF-3.1, T = 300 K evaluated libraries.

  2. Extension of activation cross-section data of deuteron induced nuclear reactions on cadmium up to 50 MeV

    NASA Astrophysics Data System (ADS)

    Hermanne, A.; Tárkányi, F.; Takács, S.; Ditrói, F.

    2016-10-01

    The excitation functions for 109,110g,111m+g,113m,114m,115mIn, 107,109,115m,115gCd and 105g,106m,110g,111Ag are presented for stacked foil irradiations on natCd targets in the 49-33 MeV deuteron energy domain. Reduced uncertainty is obtained by determining incident particle flux and energy scale relative to re-measured monitor reactions natAl(d,x)22,24Na. The results were compared to our earlier studies on natCd and on enriched 112Cd targets. The merit of the values predicted by the TALYS 1.6 code (resulting from a weighted combination of reaction cross-section data on all stable Cd isotopes as available in the on-line libraries TENDL-2014 and TENDL-2015) is discussed. Influence on optimal production routes for several radionuclides with practical applications (111In, 114mIn, 115Cd, 109,107Cd….) is reviewed.

  3. Double differential light charged particle emission cross sections for some structural fusion materials

    NASA Astrophysics Data System (ADS)

    Sarpün, Ismail Hakki; n, Abdullah Aydı; Tel, Eyyup

    2017-09-01

    In fusion reactors, neutron induced radioactivity strongly depends on the irradiated material. So, a proper selection of structural materials will have been limited the radioactive inventory in a fusion reactor. First-wall and blanket components have high radioactivity concentration due to being the most flux-exposed structures. The main objective of fusion structural material research is the development and selection of materials for reactor components with good thermo-mechanical and physical properties, coupled with low-activation characteristics. Double differential light charged particle emission cross section, which is a fundamental data to determine nuclear heating and material damages in structural fusion material research, for some elements target nuclei have been calculated by the TALYS 1.8 nuclear reaction code at 14-15 MeV neutron incident energy and compared with available experimental data in EXFOR library. Direct, compound and pre-equilibrium reaction contribution have been theoretically calculated and dominant contribution have been determined for each emission of proton, deuteron and alpha particle.

  4. Evaluation of nuclear reaction cross section data for the production of (87)Y and (88)Y via proton, deuteron and alpha-particle induced transmutations.

    PubMed

    Zaneb, H; Hussain, M; Amjad, N; Qaim, S M

    2016-06-01

    Proton, deuteron and alpha-particle induced reactions on (87,88)Sr, (nat)Zr and (85)Rb targets were evaluated for the production of (87,88)Y. The literature data were compared with nuclear model calculations using the codes ALICE-IPPE, TALYS 1.6 and EMPIRE 3.2. The evaluated cross sections were generated; therefrom thick target yields of (87,88)Y were calculated. Analysis of radio-yttrium impurities and yield showed that the (87)Sr(p, n)(87)Y and (88)Sr(p, n)(88)Y reactions are the best routes for the production of (87)Y and (88)Y respectively. The calculated yield for the (87)Sr(p, n)(87)Y reaction is 104 MBq/μAh in the energy range of 14→2.7MeV. Similarly, the calculated yield for the (88)Sr(p, n)(88)Y reaction is 3.2 MBq/μAh in the energy range of 15→7MeV. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Extension of the energy range of experimental activation cross-sections data of deuteron induced nuclear reactions on indium up to 50MeV.

    PubMed

    Tárkányi, F; Ditrói, F; Takács, S; Hermanne, A; Ignatyuk, A V

    2015-11-01

    The energy range of our earlier measured activation cross-sections data of longer-lived products of deuteron induced nuclear reactions on indium were extended from 40MeV up to 50MeV. The traditional stacked foil irradiation technique and non-destructive gamma spectrometry were used. No experimental data were found in literature for this higher energy range. Experimental cross-sections for the formation of the radionuclides (113,110)Sn, (116m,115m,114m,113m,111,110g,109)In and (115)Cd are reported in the 37-50MeV energy range, for production of (110)Sn and (110g,109)In these are the first measurements ever. The experimental data were compared with the results of cross section calculations of the ALICE and EMPIRE nuclear model codes and of the TALYS 1.6 nuclear model code as listed in the on-line library TENDL-2014. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Energy spectrum of 208Pb(n,x) reactions

    NASA Astrophysics Data System (ADS)

    Tel, E.; Kavun, Y.; Özdoǧan, H.; Kaplan, A.

    2018-02-01

    Fission and fusion reactor technologies have been investigated since 1950's on the world. For reactor technology, fission and fusion reaction investigations are play important role for improve new generation technologies. Especially, neutron reaction studies have an important place in the development of nuclear materials. So neutron effects on materials should study as theoretically and experimentally for improve reactor design. For this reason, Nuclear reaction codes are very useful tools when experimental data are unavailable. For such circumstances scientists created many nuclear reaction codes such as ALICE/ASH, CEM95, PCROSS, TALYS, GEANT, FLUKA. In this study we used ALICE/ASH, PCROSS and CEM95 codes for energy spectrum calculation of outgoing particles from Pb bombardment by neutron. While Weisskopf-Ewing model has been used for the equilibrium process in the calculations, full exciton, hybrid and geometry dependent hybrid nuclear reaction models have been used for the pre-equilibrium process. The calculated results have been discussed and compared with the experimental data taken from EXFOR.

  7. 54Fe neutron elastic and inelastic scattering differential cross sections from 2-6 MeV

    NASA Astrophysics Data System (ADS)

    Vanhoy, J. R.; Liu, S. H.; Hicks, S. F.; Combs, B. M.; Crider, B. P.; French, A. J.; Garza, E. A.; Harrison, T.; Henderson, S. L.; Howard, T. J.; McEllistrem, M. T.; Nigam, S.; Pecha, R. L.; Peters, E. E.; Prados-Estévez, F. M.; Ramirez, A. P. D.; Rice, B. G.; Ross, T. J.; Santonil, Z. C.; Sidwell, L. C.; Steves, J. L.; Thompson, B. K.; Yates, S. W.

    2018-04-01

    Measurements of neutron elastic and inelastic scattering cross sections from 54Fe were performed for nine incident neutron energies between 2 and 6 MeV. Measured differential scattering cross sections are compared to those from previous measurements and the ENDF, JENDL, and JEFF data evaluations. TALYS calculations were performed and modifications of the default parameters are found to better describe the experimental cross sections. A spherical optical model treatment is generally adequate to describe the cross sections in this energy region; however, in 54Fe the direct coupling is found to increase suddenly above 4 MeV and requires an increase in the DWBA deformation parameter by approximately 25%. This has little effect on the elastic scattering differential cross sections but makes a significant improvement in both the strength and shape of the inelastic scattering angular distribution, which are found to be very sensitive to the size and extent of the surface absorption region.

  8. Development of HA/Ag-NPs Composite Coating from Green Process for Hip Applications.

    PubMed

    Lozoya-Rodríguez, Denisse A; de Lima, Renata; Fraceto, Leonardo F; Ledezma Pérez, Antonio; Bazaldua Domínguez, Mercedes; Gómez Batres, Roberto; Reyes Rojas, Armando; Orozco Carmona, Víctor

    2017-08-08

    In the present study, biological hydroxyapatite (HA) was obtained from bovine bones through a thermal process. A total of 0% and 1% of silver nanoparticles (Ag-NPs) synthesized from Opuntia ficus (nopal) were added to the biological hydroxyapatite coatings using an atmospheric plasma spray (APS) on a Ti6Al4V substrate. Following this, its antimicrobial efficiency was evaluated against the following bacterial strains: Escherichia coli , Staphylococcus aureus , and Pseudomonas aeruginosa . This was conducted according to the Japanese Industrial Standard (JIS) Z2801:2000 "Antimicrobial Product-Test for Antimicrobial Activity and Efficacy". Scanning electron microscopy (SEM) showed that the silver nanoparticles (Ag-NPs) were evenly distributed on the coating surface. Energy dispersive X-ray spectroscopy (EDX) shows that apatite deposition occurs on a daily basis, maintaining a Ca/P rate between 2.12 and 1.45. Biocompatibility properties were evaluated with osteoblast-like cells (MC3T3-E1) by single-cell gel electrophoresis assay and Tali image cytometry.

  9. The Effects of Professional Development Activities on Principals' Perceived Instructional Leadership Practices: Multi-Country Data Analysis Using TALIS 2013

    ERIC Educational Resources Information Center

    Gumus, Emine; Bellibas, Mehmet Sukru

    2016-01-01

    The purpose of this study was to investigate the extent to which professional development predicts principals' instructional leadership in order to identify whether a relationship exists between the duration of principals' participation in distinct professional development activities and their perceived practice of instructional leadership while…

  10. 94 Mo(γ,n) and 90Zr(γ,n) cross-section measurements towards understanding the origin of p-nuclei

    NASA Astrophysics Data System (ADS)

    Meekins, E.; Banu, A.; Karwowski, H.; Silano, J.; Zimmerman, W.; Muller, J.; Rich, G.; Bhike, M.; Tornow, W.; McClesky, M.; Travaglio, C.

    2014-09-01

    The nucleosynthesis beyond iron of the rarest stable isotopes in the cosmos, the so-called p-nuclei, is one of the forefront topics in nuclear astrophysics. Recently, a stellar source was found that, for the first time, was able to produce both light and heavy p-nuclei almost at the same level as 56Fe, including the most debated 92,94Mo and 96,98Ru; it was also found that there is an important contribution from the p-process nucleosynthesis to the neutron magic nucleus 90Zr. We focus here on constraining the origin of p-nuclei through nuclear physics by studying two key astrophysical photoneutron reaction cross sections for 94Mo(γ,n) and 90Zr(γ,n). Their energy dependencies were measured using quasi-monochromatic photon beams from Duke University's High Intensity Gamma-ray Source facility at the respective neutron threshold energies up to 18 MeV. Preliminary results of these experimental cross sections will be presented along with their comparison to predictions by a statistical model based on the Hauser-Feshbach formalism implemented in codes like TALYS and SMARAGD. The nucleosynthesis beyond iron of the rarest stable isotopes in the cosmos, the so-called p-nuclei, is one of the forefront topics in nuclear astrophysics. Recently, a stellar source was found that, for the first time, was able to produce both light and heavy p-nuclei almost at the same level as 56Fe, including the most debated 92,94Mo and 96,98Ru; it was also found that there is an important contribution from the p-process nucleosynthesis to the neutron magic nucleus 90Zr. We focus here on constraining the origin of p-nuclei through nuclear physics by studying two key astrophysical photoneutron reaction cross sections for 94Mo(γ,n) and 90Zr(γ,n). Their energy dependencies were measured using quasi-monochromatic photon beams from Duke University's High Intensity Gamma-ray Source facility at the respective neutron threshold energies up to 18 MeV. Preliminary results of these experimental cross

  11. Measurement of formation cross-section of 99Mo from the 98Mo(n,γ) and 100Mo(n,2n) reactions.

    PubMed

    Badwar, Sylvia; Ghosh, Reetuparna; Lawriniang, Bioletty M; Vansola, Vibha; Sheela, Y S; Naik, Haladhara; Naik, Yeshwant; Suryanarayana, Saraswatula V; Jyrwa, Betylda; Ganesan, Srinivasan

    2017-11-01

    The formation cross-section of medical isotope 99 Mo from the 98 Mo(n,γ) reaction at the neutron energy of 0.025eV and from the 100 Mo(n,2n) reaction at the neutron energies of 11.9 and 15.75MeV have been determined by using activation and off-line γ-ray spectrometric technique. The thermal neutron energy of 0.025eV was used from the reactor critical facility at BARC, Mumbai, whereas the average neutron energies of 11.9 and 15.75MeV were generated using 7 Li(p,n) reaction in the Pelletron facility at TIFR, Mumbai. The experimentally determined cross-sections were compared with the evaluated nuclear data libraries of ENDF/B-VII.1, CENDL-3.1, JENDL-4.0 and JEFF-3.2 and are found to be in close agreement. The 100 Mo(n,2n) 99 Mo reaction cross-sections were also calculated theoretically by using TALYS-1.8 and EMPIRE-3.2 computer codes and compared with the experimental data. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Systematic study of proton capture reactions in medium-mass nuclei relevant to the p process: The case of 103Rh and In,115113

    NASA Astrophysics Data System (ADS)

    Harissopulos, S.; Spyrou, A.; Foteinou, V.; Axiotis, M.; Provatas, G.; Demetriou, P.

    2016-02-01

    The cross sections of the 103Rh(p ,γ )104Pd and the In,115113(p ,γ )Sn,116114 reactions have been determined from γ angular distribution measurements carried out at beam energies from 2 to 3.5 MeV. An array of four highly efficient HPGe detectors all shielded with BGO crystals for Compton background suppression was used. Astrophysical S factors and reaction rates were deduced from the measured cross sections. Statistical model calculations were performed using the Hauser-Feshbach (HF) code TALYS and were compared with the new data. A good agreement between theory and experiment was found. In addition, the effect of different combinations of the nuclear input parameters entering the HF calculations on the ground-state reaction rates was investigated. It was found that these rates differ by a factor 3 at the most, being thus within the average discrepancies observed between calculated p -nuclei abundances and observations, if certain combinations of optical model potentials, nuclear level densities, and γ -ray strength functions are used.

  13. Neutron-induced reaction cross-sections of 93Nb with fast neutron based on 9Be(p,n) reaction

    NASA Astrophysics Data System (ADS)

    Naik, H.; Kim, G. N.; Kim, K.; Zaman, M.; Nadeem, M.; Sahid, M.

    2018-02-01

    The cross-sections of the 93Nb (n , 2 n)92mNb, 93Nb (n , 3 n)91mNb and 93Nb (n , 4 n)90Nb reactions with the average neutron energies of 14.4 to 34.0 MeV have been determined by using an activation and off-line γ-ray spectrometric technique. The fast neutrons were produced using the 9Be (p , n) reaction with the proton energies of 25-, 35- and 45-MeV from the MC-50 Cyclotron at the Korea Institute of Radiological and Medical Sciences (KIRAMS). The neutron flux-weighted average cross-sections of the 93Nb(n , xn ; x = 2- 4) reactions were also obtained from the mono-energetic neutron-induced reaction cross-sections of 93Nb calculated using the TALYS 1.8 code, and the neutron flux spectrum based on the MCNPX 2.6.0 code. The present results for the 93Nb(n , xn ; x = 2- 4) reactions are compared with the calculated neutron flux-weighted average values and found to be in good agreement.

  14. Cyclotron production of 48V via natTi(d,x)48V nuclear reaction; a promising radionuclide

    NASA Astrophysics Data System (ADS)

    Usman, A. R.; Khandaker, M. U.; Haba, H.

    2017-06-01

    In this experimental work, we studied the excitation function of natTi(d,x)48V nuclear reactions from 24 MeV down to threshold energy. Natural titanium foils were arranged in the popular stacked-foil method and activated with deuteron beam generated from an AVF cyclotron at RIKEN, Wako, Japan. The emitted γ activities from the activated foils were measured using an offline γ-ray spectrometry. The present results were analyzed, compared with earlier published experimental data and also with the evaluated data of Talys code. Our new measured data agree with some of the earlier reported experimental data while a partial agreement is found with the evaluated theoretical data. In addition to the use of 48V as a beam intensity monitor, recent studies indicate its potentials as calibrating source in PET cameras and also as a (radioactive) label for medical applications. The results are also expected to further enrich the experimental database and also to play an important role in nuclear reactions model codes design.

  15. Elastic and inelastic scattering of neutrons from 56Fe

    NASA Astrophysics Data System (ADS)

    Ramirez, Anthony Paul; McEllistrem, M. T.; Liu, S. H.; Mukhopadhyay, S.; Peters, E. E.; Yates, S. W.; Vanhoy, J. R.; Harrison, T. D.; Rice, B. G.; Thompson, B. K.; Hicks, S. F.; Howard, T. J.; Jackson, D. T.; Lenzen, P. D.; Nguyen, T. D.; Pecha, R. L.

    2015-10-01

    The differential cross sections for elastic and inelastic scattered neutrons from 56Fe have been measured at the University of Kentucky Accelerator Laboratory (www.pa.uky.edu/accelerator) for incident neutron energies between 2.0 and 8.0 MeV and for the angular range 30° to 150°. Time-of-flight techniques and pulse-shape discrimination were employed for enhancing the neutron energy spectra and for reducing background. An overview of the experimental procedures and data analysis for the conversion of neutron yields to differential cross sections will be presented. These include the determination of the energy-dependent detection efficiencies, the normalization of the measured differential cross sections, and the attenuation and multiple scattering corrections. Our results will also be compared to evaluated cross section databases and reaction model calculations using the TALYS code. This work is supported by grants from the U.S. Department of Energy-Nuclear Energy Universities Program: NU-12-KY-UK-0201-05, and the Donald A. Cowan Physics Institute at the University of Dallas.

  16. 197Au(n ,2 n ) reaction cross section in the 15-21 MeV energy range

    NASA Astrophysics Data System (ADS)

    Kalamara, A.; Vlastou, R.; Kokkoris, M.; Nicolis, N. G.; Patronis, N.; Serris, M.; Michalopoulou, V.; Stamatopoulos, A.; Lagoyannis, A.; Harissopulos, S.

    2018-03-01

    The cross section of the 197Au(n ,2 n )196Au reaction has been determined at six energies ranging from 15.3-20.9 MeV by means of the activation technique, relative to the 27Al(n ,α )24Na reaction. Quasimonoenergetic neutron beams were produced via the 3H(d ,n )4He reaction at the 5.5 MV Tandem T11/25 accelerator laboratory of NCSR "Demokritos". After the irradiations, the induced γ -ray activity of the target and reference foils was measured with high-resolution HPGe detectors. The cross section for the high spin isomeric state (12-) was determined along with the sum of the ground (2-), the first (5+), and second (12-) isomeric states. Theoretical calculations were carried out with the codes empire 3.2.2 and talys 1.8. Optimum input parameters were chosen in such a way as to simultaneously reproduce several experimental reaction channel cross sections in a satisfactory way, namely the (n ,elastic ), (n ,2 n ), (n ,3 n ), (n ,p ), (n ,α ), and (n ,total) ones.

  17. Cross-section measurement for the 67Zn(n, α)64Ni reaction at 6.0 MeV

    NASA Astrophysics Data System (ADS)

    Zhang, Guohui; Wu, Hao; Zhang, Jiaguo; Liu, Jiaming; Chen, Jinxiang; Gledenov, Yu. M.; Sedysheva, M. V.; Khuukhenkhuu, G.; Szalanski, P. J.

    2010-01-01

    Up to now, no experimental cross-section data exist for the 67Zn ( n, α) 64Ni reaction in the MeV neutron energy region. In the present work, the cross-section of the 67Zn ( n, α) 64Ni reaction was measured at E n = 6.0 MeV. Experiments were performed at the Van de Graaff accelerator of Peking University, China. Fast neutrons were produced through the D ( d, n) 3He reaction using a deuterium gas target. Absolute neutron flux was determined by a small 238U fission chamber and a BF3 long counter was used as a neutron flux monitor. A twin gridded ionization chamber was employed as the α -particle detector and two back-to-back 67Zn samples were used for α events measurement. Background was measured and subtracted from foreground. The measured cross-section of the 67Zn ( n, α) 64Ni reaction was 7.3 (1±15%) mb at 6.0MeV. The present result was compared with existing evaluations and TALYS code calculations.

  18. PREFACE: 7th EEIGM International Conference on Advanced Materials Research

    NASA Astrophysics Data System (ADS)

    Joffe, Roberts

    2013-12-01

    The 7th EEIGM Conference on Advanced Materials Research (AMR 2013) was held at Luleå University of Technology on the 21-22 March 2013 in Luleå, SWEDEN. This conference is intended as a meeting place for researchers involved in the EEIGM programme, in the 'Erasmus Mundus' Advanced Materials Science and Engineering Master programme (AMASE) and the 'Erasmus Mundus' Doctoral Programme in Materials Science and Engineering (DocMASE). This is great opportunity to present their on-going research in the various fields of Materials Science and Engineering, exchange ideas, strengthen co-operation as well as establish new contacts. More than 60 participants representing six countries attended the meeting, in total 26 oral talks and 19 posters were presented during two days. This issue of IOP Conference Series: Materials Science and Engineering presents a selection of articles from EEIGM-7 conference. Following tradition from previous EEIGM conferences, it represents the interdisciplinary nature of Materials Science and Engineering. The papers presented in this issue deal not only with basic research but also with applied problems of materials science. The presented topics include theoretical and experimental investigations on polymer composite materials (synthetic and bio-based), metallic materials and ceramics, as well as nano-materials of different kind. Special thanks should be directed to the senior staff of Division of Materials Science at LTU who agreed to review submitted papers and thus ensured high scientific level of content of this collection of papers. The following colleagues participated in the review process: Professor Lennart Walström, Professor Roberts Joffe, Professor Janis Varna, Associate Professor Marta-Lena Antti, Dr Esa Vuorinen, Professor Aji Mathew, Professor Alexander Soldatov, Dr Andrejs Purpurs, Dr Yvonne Aitomäki, Dr Robert Pederson. Roberts Joffe October 2013, Luleå Conference photograph EEIGM7 conference participants, 22 March 2013 The PDF

  19. Measurement of the 115In(n,γ)116 m In reaction cross-section at the neutron energies of 1.12, 2.12, 3.12 and 4.12 MeV

    NASA Astrophysics Data System (ADS)

    Lawriniang, Bioletty Mary; Badwar, Sylvia; Ghosh, Reetuparna; Jyrwa, Betylda; Vansola, Vibha; Naik, Haladhara; Goswami, Ashok; Naik, Yeshwant; Datrik, Chandra Shekhar; Gupta, Amit Kumar; Singh, Vijay Pal; Pol, Sudir Shibaji; Subramanyam, Nagaraju Balabenkata; Agarwal, Arun; Singh, Pitambar

    2015-08-01

    The 115In(n,γ)116 m In reaction cross section at neutron energies of 1.12, 2.12, 3.12 and 4.12 MeV was determined by using an activation and off-line γ-ray spectrometric technique. The monoenergetic neutron energies of 1.12 - 4.12 MeV were generated from the 7Li(p,n) reaction by using proton beam with energies of 3 and 4 MeV from the folded tandem ion beam accelerator (FOTIA) at Bhabha Atomic Research Centre (BARC) and with energies of 5 and 6 MeV from the Pelletron facility at Tata Institute of Fundamental Research (TIFR), Mumbai. The 197Au(n,γ)198Au reaction cross-section was used as the neutron flux monitor.The 115In(n,γ)116 m In reaction cross section at neutron energies of 1.12, 2.12, 3.12 and 4.12 MeV was determined by using an activation and off-line γ-ray spectrometric technique. The monoenergetic neutron energies of 1.12 - 4.12 MeV were generated from the 7Li(p,n) reaction by using proton beam with energies of 3 and 4 MeV from the folded tandem ion beam accelerator (FOTIA) at Bhabha Atomic Research Centre (BARC) and with energies of 5 and 6 MeV from the Pelletron facility at Tata Institute of Fundamental Research (TIFR), Mumbai. The 197Au(n,γ)198 Au reaction cross-section was used as the neutron flux monitor. The 115In(n,γ)116 m In reaction cross-sections at neutron energies of 1.12 - 4.12 MeV were compared with the literature data and were found to be in good agreement with one set of data, but not with others. The 115In(n,γ)116 m In cross-section was also calculated theoretically by using the computer code TALYS 1.6 and was found to be slightly lower than the experimental data from the present work and the literature.)198Au reaction cross-section was used as the neutron flux monitor. The 115In(n,γ)116 m In reaction cross-sections at neutron energies of 1.12 - 4.12 MeV were compared with the literature data and were found to be in good agreement with one set of data, but not with others. The 115In(n,γ)116 m In cross-section was also calculated

  20. Measurement of 235U(n,n'γ) and 235U(n,2nγ) reaction cross sections

    NASA Astrophysics Data System (ADS)

    Kerveno, M.; Thiry, J. C.; Bacquias, A.; Borcea, C.; Dessagne, P.; Drohé, J. C.; Goriely, S.; Hilaire, S.; Jericha, E.; Karam, H.; Negret, A.; Pavlik, A.; Plompen, A. J. M.; Romain, P.; Rouki, C.; Rudolf, G.; Stanoiu, M.

    2013-02-01

    The design of generation IV nuclear reactors and the studies of new fuel cycles require knowledge of the cross sections of various nuclear reactions. Our research is focused on (n,xnγ) reactions occurring in these new reactors. The aim is to measure unknown cross sections and to reduce the uncertainty on present data for reactions and isotopes of interest for transmutation or advanced reactors. The present work studies the 235U(n,n'γ) and 235U(n,2nγ) reactions in the fast neutron energy domain (up to 20 MeV). The experiments were performed with the Geel electron linear accelerator GELINA, which delivers a pulsed white neutron beam. The time characteristics enable measuring neutron energies with the time-of-flight (TOF) technique. The neutron induced reactions [in this case inelastic scattering and (n,2n) reactions] are identified by on-line prompt γ spectroscopy with an experimental setup including four high-purity germanium (HPGe) detectors. A fission ionization chamber is used to monitor the incident neutron flux. The experimental setup and analysis methods are presented and the model calculations performed with the TALYS-1.2 code are discussed.

  1. Cross section measurements for neutron inelastic scattering and the ( n ,   2 n γ ) reaction on Pb 206

    DOE PAGES

    Negret, A.; Mihailescu, L. C.; Borcea, C.; ...

    2015-06-30

    We measured excitation functions for γ production associated with the neutron inelastic scattering and the (n, 2n) reactions on 206Pb from threshold up to 18 MeV for about 40 transitions. Two independent measurements were performed using different samples and acquisition systems to check consistency of the results. Moreover, the neutron flux was determined with a 235U fission chamber and a procedure that were validated against a fluence standard. For incident energy higher than the threshold for the first excited level and up to 3.5 MeV, estimates are provided for the total inelastic and level cross sections by combining the presentmore » γ production cross sections with the level and decay data of 206Pb reported in the literature. The uncertainty common to all incident energies is 3.0% allowing overall uncertainties from 3.3% to 30% depending on transition and neutron energy. Finally, the present data agree well with earlier work, but significantly expand the experimental database while comparisons with model calculations using the talys reaction code show good agreement over the full energy range.« less

  2. Quasicontinuum γ decay of Zr 91 , 92 : Benchmarking indirect ( n , γ ) cross section measurements for the s process

    DOE PAGES

    Guttormsen, M.; Goriely, S.; Larsen, A. C.; ...

    2017-08-21

    Here, nuclear level densities (NLDs) and γ-ray strength functions (γSFs) have been extracted from particle-γ coincidences of the 92Zr(p,p´γ) 92Zr and 92Zr (p,dγ) 91Zr reactions using the Oslo method. The new 91,92Zr γSF data, combined with photonuclear cross sections, cover the whole energy range from Eγ ≈ 1.5 MeV up to the giant dipole resonance at Eγ ≈ 17 MeV. The wide-range γSF data display structures at Eγ ≈ 9.5 MeV, compatible with a superposition of the spin-flip M1 resonance and a pygmy E1 resonance. Furthermore, the γSF shows a minimum at Eγ ≈ 2–3 MeV and an increase atmore » lower γ-ray energies. The experimentally constrained NLDs and γSFs are shown to reproduce known (n,γ) and Maxwellian-averaged cross sections for 91,92Zr using the TALYS reaction code, thus serving as a benchmark for this indirect method of estimating (n,γ) cross sections for Zr isotopes.« less

  3. Overview and evaluation of different nuclear level density models for the 123I radionuclide production.

    PubMed

    Nikjou, A; Sadeghi, M

    2018-06-01

    The 123 I radionuclide (T 1/2 = 13.22 h, β+ = 100%) is one of the most potent gamma emitters for nuclear medicine. In this study, the cyclotron production of this radionuclide via different nuclear reactions namely, the 121 Sb(α,2n), 122 Te(d,n), 123 Te(p,n), 124 Te(p,2n), 124 Xe(p,2n), 127 I(p,5n) and 127 I(d,6n) were investigated. The effect of the various phenomenological nuclear level density models such as Fermi gas model (FGM), Back-shifted Fermi gas model (BSFGM), Generalized superfluid model (GSM) and Enhanced generalized superfluid model (EGSM) moreover, the three microscopic level density models were evaluated for predicting of cross sections and production yield predictions. The SRIM code was used to obtain the target thickness. The 123 I excitation function of reactions were calculated by using of the TALYS-1.8, EMPIRE-3.2 nuclear codes and with data which taken from TENDL-2015 database, and finally the theoretical calculations were compared with reported experimental measurements in which taken from EXFOR database. Copyright © 2018 Elsevier Ltd. All rights reserved.

  4. Cross sections of the 144Sm(n,α)141Nd and 66Zn(n,α)63Ni reactions at 4.0, 5.0 and 6.0 MeV

    NASA Astrophysics Data System (ADS)

    Yury, Gledenov; Guohui, Zhang; Khuukhenkhuu, Gonchigdorj; Milana, Sedysheva; Lubos, Krupa; Sansarbayar, Enkhbold; Igor, Chuprakov; Zhimin, Wang; Xiao, Fan; Luyu, Zhang; Huaiyong, Bai

    2017-09-01

    Cross sections of the 144Sm(n,α)141Nd and 66Zn(n,α)63Ni reactions were measured at En = 4.0, 5.0 and 6.0 MeV performed at the 4.5-MV Van de Graaff Accelerator of Peking University, China. A double-section gridded ionization chamber was used to detect the alpha particles. The foil samples of 144Sm2O3 and enriched 66Zn were placed at the common cathode plate of the chamber. Monoenergetic neutrons were produced by a deuterium gas target through the 2H(d,n)3He reaction. The neutron flux was monitored by a BF3 long counter. Cross sections of the 238U(n,f) reaction were used as the standard to perform the (n,α) reaction measurement. Present results are compared with existing measurements and evaluations. They are generally in agreement with TALYS-1.6 code calculations. For the 144Sm(n,α)141Nd reaction our measurements support the data of JEF-2.2. For the 66Zn(n,α)63Ni reaction present results support the data of EAF-2010 and TENDL-2015 data.

  5. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Guttormsen, M.; Goriely, S.; Larsen, A. C.

    Here, nuclear level densities (NLDs) and γ-ray strength functions (γSFs) have been extracted from particle-γ coincidences of the 92Zr(p,p´γ) 92Zr and 92Zr (p,dγ) 91Zr reactions using the Oslo method. The new 91,92Zr γSF data, combined with photonuclear cross sections, cover the whole energy range from Eγ ≈ 1.5 MeV up to the giant dipole resonance at Eγ ≈ 17 MeV. The wide-range γSF data display structures at Eγ ≈ 9.5 MeV, compatible with a superposition of the spin-flip M1 resonance and a pygmy E1 resonance. Furthermore, the γSF shows a minimum at Eγ ≈ 2–3 MeV and an increase atmore » lower γ-ray energies. The experimentally constrained NLDs and γSFs are shown to reproduce known (n,γ) and Maxwellian-averaged cross sections for 91,92Zr using the TALYS reaction code, thus serving as a benchmark for this indirect method of estimating (n,γ) cross sections for Zr isotopes.« less

  6. Investigation of activation cross section data of alpha particle induced nuclear reaction on molybdenum up to 40 MeV: Review of production routes of medically relevant 97,103Ru

    NASA Astrophysics Data System (ADS)

    Tárkányi, F.; Hermanne, A.; Ditrói, F.; Takács, S.; Ignatyuk, A.

    2017-05-01

    The main goals of this investigations were to expand and consolidate reliable activation cross-section data for the natMo(α,x) reactions in connection with production of medically relevant 97,103Ru and the use of the natMo(α,x)97Ru reaction for monitoring beam parameters. The excitation functions for formation of the gamma-emitting radionuclides 94Ru, 95Ru, 97Ru, 103Ru, 93mTc, 93gTc(m+), 94mTc, 94gTc, 95mTc, 95gTc, 96gTc(m+), 99mTc, 93mMo, 99Mo(cum), 90Nb(m+) and 88Zr were measured up to 40 MeV alpha-particle energy by using the stacked foil technique and activation method. Data of our earlier similar experiments were re-evaluated and resulted in corrections on the reported results. Our experimental data were compared with critically analyzed literature data and with the results of model calculations, obtained by using the ALICE-IPPE, EMPIRE 3.1 (Rivoli) and TALYS codes (TENDL-2011 and TENDL-2015 on-line libraries). Nuclear data for different production routes of 97Ru and 103Ru are compiled and reviewed.

  7. Monitoring Period and Amplitude Changes in Classical Cepheids

    NASA Astrophysics Data System (ADS)

    Erickson, Mary; Engle, Scott G.; Wells, Mark

    2017-06-01

    Cepheid Variable Stars, which are located on the Instability Strip of the Hertzsprung-Russel Diagram, can be used as “standard candle” distance markers (Fiorentino 2007). This came about after the discovery of the Period-Luminosity Relationship (the Leavitt Law), and they have since become a cornerstone of the Cosmic Distance Scale and are helping to further refine the Hubble Constant. Cepheids will cross the Instability Strip, either in a “redward” (cooler) or “blueward” (hotter) direction depending on the stage in which the Cepheid is evolving (Neilson 2012). While Cepheids were originally believed to have regular periods, many are now known to have varying periods, dating back to Eddington (1919). Therefore, Cepheids must be closely monitored in order to deduce where these period variations are coming from - either from inside the star itself or from some outside source. Determining period changes in Cepheids can reveal important information (e.g. evolutionary states, potential companions, etc.).Photometric data were taken for two Cepheids from two different sources and analyzed. The Cepheids in question are AA Gem and BB Gem, both located in the Gemini constellation. Data for these two stars were taken from the All Sky Automated Survey (ASAS) and from the Robotically Controlled Telescope (RCT) at Kitt Peak National Observatory, on which Villanova has guaranteed access. ASAS observes automatically each clear night, and has done so for several years, making it an excellent source for obtaining Cepheid data. The RCT telescope also operates automatically, observing from a preset target list, and achieves a much higher precision than ASAS can. Multi-aperture photometry was performed on the AA Gem and BB Gem RCT images, in Astroimagej. The data were then separated into different seasons, and Fourier fits were applied to the light curves in Kephem (written by Andrej Prša and collaborators). These results were then analyzed via the Hertzsprung Method to

  8. Monitoring Period and Amplitude Changes in Classical Cepheids

    NASA Astrophysics Data System (ADS)

    Erickson, Mary; Engle, Scott G.; Wells, Mark

    2017-01-01

    Cepheid Variable Stars, which are located on the Instability Strip of the Hertzsprung-Russel Diagram, can be used as “standard candle” distance markers (Fiorentino 2007). This came about after the discovery of the Period-Luminosity Relationship (the Leavitt Law), and they have since become a cornerstone of the Cosmic Distance Scale and are helping to further refine the Hubble Constant. Cepheids will cross the Instability Strip, either in a “redward” (cooler) or “blueward” (hotter) direction depending on the stage in which the Cepheid is evolving (Neilson 2012). While Cepheids were originally believed to have regular periods, many are now known to have varying periods, dating back to Eddington (1919). Therefore, Cepheids must be closely monitored in order to deduce where these period variations are coming from - either from inside the star itself or from some outside source. Determining period changes in Cepheids can reveal important information (e.g. evolutionary states, potential companions, etc.).Photometric data were taken for two Cepheids from two different sources and analyzed. The Cepheids in question are AA Gem and BB Gem, both located in the Gemini constellation. Data for these two stars were taken from the All Sky Automated Survey (ASAS) and from the Robotically Controlled Telescope (RCT) at Kitt Peak National Observatory, on which Villanova has guaranteed access. ASAS observes automatically each clear night, and has done so for several years, making it an excellent source for obtaining Cepheid data. The RCT telescope also operates automatically, observing from a preset target list, and achieves a much higher precision than ASAS can. Multi-aperture photometry was performed on the AA Gem and BB Gem RCT images, in Astroimagej. The data were then separated into different seasons, and Fourier fits were applied to the light curves in Kephem (written by Andrej Prša and collaborators). These results were then analyzed via the Hertzsprung Method to

  9. Radioactive by-products of a self-shielded cyclotron and the liquid target system for F-18 routine production.

    PubMed

    Kambali, I; Suryanto, H; Parwanto

    2016-06-01

    Routine production of F-18 radionuclide using proton beams accelerated in a cyclotron could potentially generate residual radioisotopes in the cyclotron vicinity which eventually become major safety concerns over radiation exposure to the workers. In this investigation, a typical 11-MeV proton, self-shielded cyclotron has been assessed for its residual radiation sources in the cyclotron's shielding, tank/chamber, cave wall as well as target system. Using a portable gamma ray spectroscopy system, the radiation measurement in the cyclotron environment has been carried out. Experimental results indicate that relatively long-lived radioisotopes such as Mn-54, Zn-65 and Eu-152 are detected in the inner and outer surface of the cyclotron shielding respectively while Mn-54 spectrum is observed around the cyclotron chamber. Weak intensity of Eu-152 radioisotope is again spotted in the inner and outer surface of the cyclotron cave wall. Angular distribution measurement of the Eu-152 shows that the intensity slightly drops with increasing observation angle relative to the proton beam incoming angle. In the target system, gamma rays from Co-56, Mn-52, Co-60, Mn-54, Ag-110 m are identified. TALYS-calculated nuclear cross-section data are used to study the origins of the radioactive by-products.

  10. Capture and photonuclear reaction rates involving charged-particles: Impacts of nuclear ingredients and future measurement on ELI-NP

    NASA Astrophysics Data System (ADS)

    Xu, Y.; Goriely, S.; Balabanski, D. L.; Chesnevskaya, S.; Guardo, G. L.; La Cognata, M.; Lan, H. Y.; Lattuada, D.; Luo, W.; Matei, C.

    2018-05-01

    The astrophysical p-process is an important way of nucleosynthesis to produce the stable and proton-rich nuclei beyond Fe which can not be reached by the s- and r-processes. In the present study, the impact of nuclear ingredients, especially the nuclear potential, level density and strength function, to the astrophysical re-action rates of (p,γ), (α,γ), (γ,p), and (γ,α) reactions are systematically studied. The calculations are performed basad on the modern reaction code TALYS for about 3000 stable and proton-rich nuclei with 12≤Z≤110. In particular, both of the Wood-Saxon potential and the microscopic folding potential are taken into account. It is found that both the capture and photonuclear reaction rates are very sensitive to the nuclear potential, thus the better determination of nuclear potential would be important to reduce the uncertainties of reaction rates. Meanwhile, the Extreme Light Infrastructure-Nuclear Physics (ELI-NP) facility is being developed, which will provide the great opportunity to experimentally study the photonuclear reactions in p-process. Simulations of the experimental setup for the measurements of the photonuclear reactions 96Ru(γ,p) and 96Ru(γ,α) are performed. It is shown that the experiments of photonuclear reactions in p-process based on ELI-NP are quite promising.

  11. [I direttori delle riviste vanno avanti: attenersi ai principi accademici, adottare trasparenza e rispetto e applicare le regole.

    PubMed

    Teixeira da Silva, Jaime A; Dobránszki, Judit

    2018-05-01

    Nonostante i cambiamenti in corso nell'ambito delle pubblicazioni scientifiche (STEM - scienza, tecnologia, ingegneria e medicina), è indubbio che i direttori delle riviste restano i più importanti custodi del processo editoriale. In questo articolo vengono analizzati i motivi per cui i direttori delle riviste devono continuare ad attenersi ai principi editoriali fondamentali e a utilizzare le nuove tecnologie digitali solo per dare forza al contenuto, ma non per sostituirlo nella sua qualità. Per raggiungere questo obiettivo, in un'epoca caratterizzata da controlli ed equilibri, i direttori delle riviste devono essere attentamente sorvegliati e ritenuti responsabili tanto quanto gli autori che essi stessi valutano. Qualunque scorciatoia potrebbe avere conseguenze negative e inaspettate per quella rivista che non si attenesse a tali regole, che vedrebbe intaccata la propria reputazione e che dovrebbe faticare per recuperare la fiducia dei propri lettori. Quindi, a rischio di sembrare scontati, è meglio prevenire il danno alla reputazione piuttosto che curarlo. L'unico modo per evitarlo è che i direttori delle riviste si adattino a un crescente movimento sempre più critico, che richiede maggiore trasparenza e responsabilità da parte di chi contribuisce a costruire la base delle conoscenze scientifiche e dalla società, specialmente laddove la ricerca è finanziata pubblicamente.

  12. Study of {sup 179}Hf{sup m2} excitation

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vishnevsky, I. N.; Zheltonozhsky, V. A., E-mail: zhelton@kinr.kiev.ua; Savrasov, A. N.

    Isomeric ratios of {sup 179}Hf{sup m2,g} yields in the (γ, n) reaction and the cross section for the {sup 179}Hf{sup m2} population in the (α, p) reaction are measured for the first time at the end-point energies of 15.1 and 17.5 MeV for bremsstrahlung photons and 26 MeV for alpha particles. The results are σ = (1.1 ± 0.11) × 10{sup −27} cm{sup 2} for the {sup 176}Lu(α, p){sup 179}Hf{sup m2} reaction and Y{sub m2}/Y{sub g} = (6.1 ± 0.3) × 10{sup −6} and (3.7 ± 0.2) × 10{sup −6} for the {sup 180}Hf(γ, n){sup 179}Hf{sup m22} reaction at E{submore » ep} =15.1 and 17.5 MeV, respectively. The experimental data on the relative {sup 179}Hf{sup m2} yield indicate a single-humped shape of the excitation function for the {sup 180}Hf(γ, n){sup 179}Hf{sup m2} reaction. Simulation is performed using the TALYS-1.4 and EMPIRE-3.2 codes.« less

  13. Quantification of in vitro produced wear sites on composite resins using contact profilometry and CCD microscopy: a methodological investigation.

    PubMed

    Koottathape, Natthavoot; Takahashi, Hidekazu; Finger, Wernerj; Kanehira, Masafumi; Iwasaki, Naohiko; Aoyagi, Yujin

    2012-06-01

    Although attritive and abrasive wear of recent composite resins has been substantially reduced, in vitro wear testing with reasonably simulating devices and quantitative determination of resulting wear is still needed. Three-dimensional scanning methods are frequently used for this purpose. The aim of this trial was to compare maximum depth of wear and volume loss of composite samples, evaluated with a contact profilometer and a non-contact CCD camera imaging system, respectively. Twenty-three random composite specimens with wear traces produced in a ball-on-disc sliding device, using poppy seed slurry and PMMA suspension as third-body media, were evaluated with the contact profilometer (TalyScan 150, Taylor Hobson LTD, Leicester, UK) and with the digital CCD microscope (VHX1000, KEYENCE, Osaka, Japan). The target parameters were maximum depth of the wear and volume loss.Results - The individual time of measurement needed with the non-contact CCD method was almost three hours less than that with the contact method. Both, maximum depth of wear and volume loss data, recorded with the two methods were linearly correlated (r(2) > 0.97; p < 0.01). The contact scanning method and the non-contact CCD method are equally suitable for determination of maximum depth of wear and volume loss of abraded composite resins.

  14. Cytotoxicity and genotoxicity of biogenic silver nanoparticles

    NASA Astrophysics Data System (ADS)

    Lima, R.; Feitosa, L. O.; Ballottin, D.; Marcato, P. D.; Tasic, L.; Durán, N.

    2013-04-01

    Biogenic silver nanoparticles with 40.3 ± 3.5 nm size and negative surface charge (- 40 mV) were prepared with Fusarium oxysporum. The cytotoxicity of 3T3 cell and human lymphocyte were studied by a TaliTM image-based cytometer and the genotoxicity through Allium cepa and comet assay. The results of BioAg-w (washed) and BioAg-nw (unwashed) biogenic silver nanoparticles showed cytotoxicity exceeding 50 μg/mL with no significant differences of response in 5 and 10 μg/mL regarding viability. Results of genotoxicity at concentrations 5.0 and 10.0 ug/mL show some response, but at concentrations 0.5 and 1.0 μg/mL the washed and unwashed silver nanoparticles did not present any effect. This in an important result since in tests with different bacteria species and strains, including resistant, MIC (minimal inhibitory concentration) had good answers at concentrations less than 1.9 μg/mL. This work concludes that biogenic silver nanoparticles may be a promising option for antimicrobial use in the range where no cyto or genotoxic effect were observed. Furthermore, human cells were found to have a greater resistance to the toxic effects of silver nanoparticles in comparison with other cells.

  15. Computed tomography of calcaneal fractures: anatomy, pathology, dosimetry, and clinical relevance

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Guyer, B.H.; Levinsohn, E.M.; Fredrickson, B.E.

    1985-11-01

    Eighteen CT examinations were performed in 10 patients for the evaluation of acute intraarticular fractures and their follow-up. Fractures comparable to those in the patients were created in cadavers. The normal anatomy and the traumatically altered anatomy of the calcaneus in the axial, coronal, and sagittal planes are demonstrated by CT and corresponding anatomic sections. Scanning was performed in the axial plane, with subsequent reconstruction in the coronal and sagittal planes. The axial scans show disruption of the inferior part of the posterior facet, calcaneocuboid joint involvement, and widening of the calcaneus. The coronal scans show disruption of the superiormore » part of the posterior facet, sustentaculum tali depression (involvement of middle and anterior facets), peroneal and flexor hallucis longus tendon impingement, and widening and height loss of the calcaneus. The sagittal scans show disruption of the posterior facet, calcaneocuboid joint involvement, and height loss of the calcaneus and allow the evaluation of Boehler's and Gissane's angles. All three planes show the position of major fracture fragments. Radiation dose to the foot was measured to be 0.1 rad (0.001 Gy) for plain film radiography (five exposures), 18 rad (0.18 Gy) for conventional tomography (20 cuts), and 2.6 rad (0.026 Gy) for axial CT examination.« less

  16. Calculated differential and double differential cross section of DT neutron induced reactions on natural chromium (Cr)

    NASA Astrophysics Data System (ADS)

    Rajput, Mayank; Vala, Sudhirsinh; Srinivasan, R.; Abhangi, M.; Subhash, P. V.; Pandey, B.; Rao, C. V. S.; Bora, D.

    2018-01-01

    Chromium is an important alloying element of stainless steel (SS) and SS is the main constituent of structural material proposed for fusion reactors. Energy and double differential cross section data will be required to estimate nuclear responses in the materials used in fusion reactors. There are no experimental data of energy and double differential cross section, available for neutron induced reactions on natural chromium at 14 MeV neutron energy. In this study, energy and double differential cross section data of (n,p) and (n,α) reactions for all the stable isotopes of chromium have been estimated, using appropriate nuclear models in TALYS code. The cross section data of stable isotopes are later converted into the energy and double differential cross section data of natural Cr using the isotopic abundance. The contribution from compound, pre-equilibrium and direct nuclear reaction to total reaction have also been calculated for 52,50Cr(n,p) and 52Cr(n,α). The calculation of energy differential cross section shows that most of emitted protons and alpha particles are of 3 and 8 MeV respectively. The calculated data is compared with the data from EXFOR data library and is found to be in good agreement.

  17. [Concomitant injuries after upper ankle joint dislocations].

    PubMed

    Dann, K; Wahler, G; Neubauer, N; Steiner, R; Titze, W; Wagner, M

    1996-09-01

    Functional treatment with the Air Stirrup Ankle Brace recommended by C. N. Stover in 1979 can reduce pathological inversion of the ankle joint. In our retrospective study of 109 patients treated by this kind of ankle brace we found 96 patients (88%) with excellent results. Only 13 patients (12%) reported moderate to good results. To detect and characterize their painful conditions of ankles we did a clinical, radiological and MRI-Investigation. In only 2 cases we found a moderate instability after clinical investigation, anterior stress roentgenogram and talar tilt. By using the MRI-investigation 1.0 Tesla with a 512 x 360 Matrix we could find 10 cases with osteochondral lesions of the ankle. In 7 cases there was separated ossicle in the fibulotalar joint, in 1 case we detected a fracture of the processus anterior tali, in another case we could see a posttraumatic lesion of the talus and calcaneus with bone bruise and at least one osteochondral fracture of the distal tibia. The capability of the MRI to detect particularly osteo-chondral lesions of the talus and the tibiofibular joint was shown in 10 of 13 cases. Therefore we recommend to do an MRI-investigation on all patients after ankle sprain if there are painful conditions within the ankle after conservative treatment.

  18. Measurements of 67Ga production cross section induced by protons on natZn in the low energy range from 1.678 to 2.444 MeV

    NASA Astrophysics Data System (ADS)

    Wachter, J. A.; Miranda, P. A.; Morales, J. R.; Cancino, S. A.; Correa, R.

    2015-02-01

    The experimental production cross section for the reaction natZn(p,x)67Ga has been measured in the energy range from 1.678 to 2.444 MeV. The methodology used in this work is based on characteristic X-ray emitted after irradiation by the daughter nuclei that decays by electron capture (EC) and the use of a complementary PIXE experiment. By doing so, expressions needed to determine cross section values are simplified since experimental factors such as geometric setup and an detector efficiency are avoided. 67Ga is a radionuclide particularly suited for this method since it decays by electron capture in 100% and the subsequent characteristic X-ray emission is easily detected. Natural zinc targets were fabricated by PVD technique and afterwards their thicknesses were determined by Rutherford Backscattering Spectrometry. Cross sections measurements were carried out by using the Van de Graaff accelerator located at Faculty of Sciences, University of Chile. It was found that our data for the natZn(p,x)67Ga reaction are, in general, in good agreement when compared to existing experimental data and to those calculated ALICE/ASH nuclear code. On the other hand, values predicted by Talys-1.6 are showing systematically lower magnitudes than our measured data.

  19. γ production and neutron inelastic scattering cross sections for 76Ge

    NASA Astrophysics Data System (ADS)

    Rouki, C.; Domula, A. R.; Drohé, J. C.; Koning, A. J.; Plompen, A. J. M.; Zuber, K.

    2013-11-01

    The 2040.7-keV γ ray from the 69th excited state of 76Ge was investigated in the interest of Ge-based double-β-decay experiments like the Germanium Detector Array (GERDA) experiment. The predicted transition could interfere with valid 0νββ events at 2039.0 keV, creating false signals in large-volume 76Ge enriched detectors. The measurement was performed with the Gamma Array for Inelastic Neutron Scattering (GAINS) at the Geel Electron Linear Accelerator (GELINA) white neutron source, using the (n,n'γ) technique and focusing on the strongest γ rays originating from the level. Upper limits obtained for the production cross section of the 2040.7-keV γ ray showed no possible influence on GERDA data. Additional analysis of the data yielded high-resolution cross sections for the low-lying states of 76Ge and related γ rays, improving the accuracy and extending existing data for five transitions and five levels. The inelastic scattering cross section for 76Ge was determined for incident neutron energies up to 2.23 MeV, significantly increasing the energy range for which experimental data are available. Comparisons with model calculations using the talys code are presented indicating that accounting for the recently established asymmetric rotor structure should lead to an improved description of the data.

  20. Inspection of 56Fe γ-Ray angular distributions as a function of incident neutron energy using optical model approaches

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Vanhoy, J. R.; Ramirez, A. P.; Alcorn-Dominguez, D. K.

    Neutron inelastic scattering cross sections measured directly through (n,n) or deduced from g-ray production cross sections following inelastic neutron scattering (n,n0) are a focus of basic and applied research at the University of Kentucky Accelerator Laboratory (www.pa.uky.edu/accelerator). For nuclear data applications, angle-integrated cross sections are desired over a wide range of fast neutron energies. Several days of experimental beam time are required for a data set at each incident neutron energy, which limits the number of angular distributions that can be measured in a reasonable amount of time. Approximations can be employed to generate cross sections with a higher energymore » resolution, since at 125°, the a 2P 2 term of the Legendre expansion is identically zero and the a 4P 4 is assumed to be very small. Provided this assumption is true, a single measurement at 125o would produce the g-ray production cross section. Finally, this project tests these assumptions and energy dependences using the codes CINDY/SCAT and TALYS/ECIS06/SCAT. It is found that care must be taken when interpreting g-ray excitation functions as cross sections when the incident neutron energy is <1000 keV above threshold or before the onset of feeding.« less

  1. Two-Step Processes and IR Recording in Photorefractive Crystals

    NASA Astrophysics Data System (ADS)

    Kraetzig, Eckhard; Buse, Karsten

    Two-step excitation processes have been used for hologram storage in photorefractive crystals. By this means the interference pattern can be formed with red or near-IR light and nondestructive readout of information is possible. Often shallow levels are involved in the holographic recording process in photorefractive crystals. The shallow levels can be populated by illumination with visible or UV pulses forming states with relatively long lifetimes, thus sensitizing the crystals for holographic recording with IR pulses. In LiNbO3 and LiTaO3 the most important shallow levels have been identified. They result from NbLi^5+ and TaLi^5+ antisite defects (Nb5+ or Ta5+ on Li+ site). The crystals can also be pre-illuminated with visible light from a cw argon laser or a xenon lamp and holograms can be recorded with red light from a laser diode. The sensitization process is possible for other photorefractive crystals, too. The holograms can be read nondestructively with IR light and can be erased with green light. The hologram lifetime is limited by electron tunneling or by an ionic conductivity. Lifetimes up to years can be achieved. Recording of components for telecommunication applications with IR light allows one to create reconfigurable and thus more versatile devices.

  2. Chemical composition of particles from traditional burning of Pakistani wood species

    NASA Astrophysics Data System (ADS)

    Shahid, Imran; Kistler, Magdalena; Mukhtar, Azam; Ramirez-Santa Cruz, Carlos; Bauer, Heidi; Puxbaum, Hans

    2015-11-01

    Total particulate matter (TPM) emitted during burning of three types of Pakistani wood (eucalyptus camaldulensis, local name Safeeda; acacia nilotica, local name Kikar, Babul; dalbergia sissoo, Shisham, Tali) in a traditional brick stove were collected and analyzed for anhydrosugars, sugar alcohols, trace metals, soluble ions and carbonaceous species. This is a first study reporting anhydrosugars in wood smoke particles emitted during traditional burning of common wood types in Pakistan. Carbonaceous species showed the highest contribution to the particulate matter. Although the total carbon (TC) contribution was similar for all burnings (64.8-70.2%), the EC/OC ratio varied significantly, from 0.2 to 0.3 for Accacia and Dalbergia to 0.7-0.8 for Eucalyptus and Wood-mix. Among inorganic constituents potassium chloride and silicon were found at levels higher than 1%. The levoglucosan concentrations ranged from 3.0 to 6.6% (average 5.6%) with the highest value for Accacia and lowest value for the wood-mix. The high levoglucosan/mannosan ratios of 20-28 were typical for hardwood. The ratio between levoglucosan and galactosan varied stronger and was found to be around 13-20 for Accacia, Eucalyptus and Wood mix, and 43 for Dalbergia. The determined levoglucosan concentrations allowed assessing the conversion factor for calculation of biomass smoke contribution to ambient particulate matter levels in Pakistan.

  3. Measurement of activation cross sections of alpha particle induced reactions on iridium up to an energy of 50 MeV.

    PubMed

    Takács, S; Ditrói, F; Szűcs, Z; Aikawa, M; Haba, H; Komori, Y; Saito, M

    2018-06-01

    Cross sections of alpha particle induced nuclear reactions on iridium were investigated using a 51.2-MeV alpha particle beam. The standard stacked-foil target technique and the activation method were applied. The activity of the reaction products was assessed without chemical separation using high resolution gamma-ray spectrometry. Excitation functions for production of gold, platinum and iridium isotopes ( 196m2 Au, 196m,g Au, 195m,g Au, 194 Au, 193 m,g Au, 192 Au, 191m,g Au, 191 Pt, 195m Pt, 194g Ir, 194m Ir, 192g Ir, 190g Ir and 189 Ir) were determined and compared with available earlier measured experimental data and results of theoretical calculations using TALYS code system. Cross section data were reported for the first time for the nat Ir(α,x) 196m2 Au, nat Ir(α,x) 196m,g Au, nat Ir(α,x) 191 Pt, nat Ir(α,x) 195m Pt, nat Ir(α,x) 194g Ir, nat Ir(α,x) 194m Ir, nat Ir(α,x) 190g Ir and nat Ir(α,x) 189 Ir processes. A possible production route for 195m Pt, the potentially important radionuclide in nuclear medicine, is discussed. Copyright © 2018 Elsevier Ltd. All rights reserved.

  4. Photonuclear reactions in astrophysical p-process: Theoretical calculations and experiment simulation based on ELI-NP

    NASA Astrophysics Data System (ADS)

    Xu, Yi; Luo, Wen; Balabanski, Dimiter; Goriely, Stephane; Matei, Catalin; Tesileanu, Ovidiu

    2017-09-01

    The astrophysical p-process is an important way of nucleosynthesis to produce the stable and proton-rich nuclei beyond Fe which can not be reached by the s- and r-processes. In the present study, the astrophysical reaction rates of (γ,n), (γ,p), and (γ,α) reactions are computed within the modern reaction code TALYS for about 3000 stable and proton-rich nuclei with 12 < Z < 110. The nuclear structure ingredients involved in the calculation are determined from experimental data whenever available and, if not, from global microscopic nuclear models. In particular, both of the Wood-Saxon potential and the double folding potential with density dependent M3Y (DDM3Y) effective interaction are used for the calculations. It is found that the photonuclear reaction rates are very sensitive to the nuclear potential, and the better determination of nuclear potential would be important to reduce the uncertainties of reaction rates. Meanwhile, the Extreme Light Infrastructure-Nuclear Physics (ELI-NP) facility is being developed, which will provide the great opportunity to experimentally study the photonuclear reactions in p-process. Simulations of the experimental setup for the measurements of the photonuclear reactions 96Ru(γ,p) and 96Ru(γ,α) are performed. It is shown that the experiments of photonuclear reactions in p-process based on ELI-NP are quite promising.

  5. Inspection of 56Fe γ-Ray angular distributions as a function of incident neutron energy using optical model approaches

    DOE PAGES

    Vanhoy, J. R.; Ramirez, A. P.; Alcorn-Dominguez, D. K.; ...

    2017-09-13

    Neutron inelastic scattering cross sections measured directly through (n,n) or deduced from g-ray production cross sections following inelastic neutron scattering (n,n0) are a focus of basic and applied research at the University of Kentucky Accelerator Laboratory (www.pa.uky.edu/accelerator). For nuclear data applications, angle-integrated cross sections are desired over a wide range of fast neutron energies. Several days of experimental beam time are required for a data set at each incident neutron energy, which limits the number of angular distributions that can be measured in a reasonable amount of time. Approximations can be employed to generate cross sections with a higher energymore » resolution, since at 125°, the a 2P 2 term of the Legendre expansion is identically zero and the a 4P 4 is assumed to be very small. Provided this assumption is true, a single measurement at 125o would produce the g-ray production cross section. Finally, this project tests these assumptions and energy dependences using the codes CINDY/SCAT and TALYS/ECIS06/SCAT. It is found that care must be taken when interpreting g-ray excitation functions as cross sections when the incident neutron energy is <1000 keV above threshold or before the onset of feeding.« less

  6. Inspection of 56Fe γ-Ray angular distributions as a function of incident neutron energy using optical model approaches

    NASA Astrophysics Data System (ADS)

    Vanhoy, J. R.; Ramirez, A. P.; Alcorn-Dominguez, D. K.; Hicks, S. F.; Peters, E. E.; McEllistrem, M. T.; Mukhopadhyay, S.; Yates, S. W.

    2017-09-01

    Neutron inelastic scattering cross sections measured directly through (n,n) or deduced from γ-ray production cross sections following inelastic neutron scattering (n,n'γ) are a focus of basic and applied research at the University of Kentucky Accelerator Laboratory (www.pa.uky.edu/accelerator). For nuclear data applications, angle-integrated cross sections are desired over a wide range of fast neutron energies. Several days of experimental beam time are required for a data set at each incident neutron energy, which limits the number of angular distributions that can be measured in a reasonable amount of time. Approximations can be employed to generate cross sections with a higher energy resolution, since at 125o, the a2P2 term of the Legendre expansion is identically zero and the a4P4 is assumed to be very small. Provided this assumption is true, a single measurement at 125o would produce the γ-ray production cross section. This project tests these assumptions and energy dependences using the codes CINDY/SCAT and TALYS/ECIS06/SCAT. It is found that care must be taken when interpreting γ-ray excitation functions as cross sections when the incident neutron energy is < 1000 keV above threshold or before the onset of feeding.

  7. Investigation of proton induced reactions on niobium at low and medium energies

    NASA Astrophysics Data System (ADS)

    Ditrói, F.; Hermanne, A.; Corniani, E.; Takács, S.; Tárkányi, F.; Csikai, J.; Shubin, Yu. N.

    2009-10-01

    Niobium is a metal with important technological applications: use as alloying element to increase strength of super alloys, as thin layer for tribological applications, as superconductive material, in high temperature engineering systems, etc. In the frame of a systematic study of activation cross-sections of charged particle induced reactions on structural materials proton induced excitation functions on Nb targets were determined with the aim of applications in accelerator and reactor technology and for thin layer activation (TLA). The charged particle activation cross-sections on this element are also important for yield calculation of medical isotope production ( 88,89Zr, 86,87,88Y) and for dose estimation in PET targetry. As niobium is a monoisotopic element it is an ideal target material to test nuclear reaction theories. We present here the experimental excitation functions of 93Nb(p,x) 90,93mMo, 92m,91m,90Nb, 88,89Zr and 88Y in the energy range 0-37 MeV. The results were compared with the theoretical cross-sections calculated by means of the code ALICE-IPPE, EMPIRE-3, TALYS and with the literature data. The theory reproduces the shape of the measured results well and magnitude is also acceptable. Thick target yields calculated from our fitted cross-section give reliable estimations for production of medically relevant radioisotopes and for dose estimation in accelerator technology.

  8. Re-measurement of the 33S(α ,p )36Cl cross section for early solar system nuclide enrichment

    NASA Astrophysics Data System (ADS)

    Anderson, Tyler; Skulski, Michael; Clark, Adam; Nelson, Austin; Ostdiek, Karen; Collon, Philippe; Chmiel, Greg; Woodruff, Tom; Caffee, Marc

    2017-07-01

    Short-lived radionuclides (SLRs) with half-lives less than 100 Myr are known to have existed around the time of the formation of the solar system around 4.5 billion years ago. Understanding the production sources for SLRs is important for improving our understanding of processes taking place just after solar system formation as well as their timescales. Early solar system models rely heavily on calculations from nuclear theory due to a lack of experimental data for the nuclear reactions taking place. In 2013, Bowers et al. measured 36Cl production cross sections via the 33S(α ,p ) reaction and reported cross sections that were systematically higher than predicted by Hauser-Feshbach codes. Soon after, a paper by Peter Mohr highlighted the challenges the new data would pose to current nuclear theory if verified. The 33S(α ,p )36Cl reaction was re-measured at five energies between 0.78 MeV/nucleon and 1.52 MeV/nucleon, in the same range as measured by Bowers et al., and found systematically lower cross sections than originally reported, with the new results in good agreement with the Hauser-Feshbach code talys. Loss of Cl carrier in chemical extraction and errors in determination of reaction energy ranges are both possible explanations for artificially inflated cross sections measured in the previous work.

  9. Cross sections of the {sup 67}Zn(n,{alpha}){sup 64}Ni reaction at 4.0, 5.0, and 6.0 MeV

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang Guohui; Liu Jiaming; Wu Hao

    2010-11-15

    Experimental cross section data of the {sup 67}Zn(n,{alpha}){sup 64}Ni reaction are very scanty because the residual nucleus {sup 64}Ni is stable and the commonly used activation method is not feasible. As a result, very large deviations (about 10 times) exist among different nuclear data libraries. In the present work, cross sections of the partial {sup 67}Zn(n,{alpha}{sub 0}){sup 64}Ni and total {sup 67}Zn(n,{alpha}){sup 64}Ni reactions are measured at neutron energies of 4.0 and 5.0 MeV for the first time, and those of 6.0 MeV are remeasured for consistency checking. A twin-gridded ionization chamber was used as the charged-particle detector and twomore » enriched back-to-back-set {sup 67}Zn samples were adopted. Experiments were performed at the 4.5 MV Van de Graaff Accelerator of Peking University. Neutrons were produced through the {sup 2}H(d,n){sup 3}He reaction using a deuterium gas target. Absolute neutron flux was determined by counting the fission fragments from a {sup 238}U sample placed inside the gridded ionization chamber while a BF{sub 3} long counter was employed as neutron flux monitor. Present data are compared with results of previous measurements, evaluations, and talys code calculations.« less

  10. Nuclear model calculation and targetry recipe for production of 110mIn.

    PubMed

    Kakavand, T; Mirzaii, M; Eslami, M; Karimi, A

    2015-10-01

    (110m)In is potentially an important positron emitting that can be used in positron emission tomography. In this work, the excitation functions and production yields of (110)Cd(d, 2n), (111)Cd(d, 3n), (nat)Cd(d, xn), (110)Cd(p, n), (111)Cd(p, 2n), (112)Cd(p, 3n) and (nat)Cd(p, xn) reactions to produce the (110m)In were calculated using nuclear model code TALYS and compared with the experimental data. The yield of isomeric state production of (110)In was also compared with ground state production ones to reach the optimal energy range of projectile for the high yield production of metastable state. The results indicate that the (110)Cd(p, n)(110m)In is a high yield reaction with an isomeric ratio (σ(m)/σ(g)) of about 35 within the optimal incident energy range of 15-5 MeV. To make the target, cadmium was electroplated on a copper substrate in varying electroplating conditions such as PH, DC current density, temperature and time. A set of cold tests were also performed on the final sample under several thermal shocks to verify target resistance. The best electroplated cadmium target was irradiated with 15 MeV protons at current of 100 µA for one hour and the production yield of (110m)In and other byproducts were measured. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Symmetry analysis of talus bone: A Geometric morphometric approach.

    PubMed

    Islam, K; Dobbe, A; Komeili, A; Duke, K; El-Rich, M; Dhillon, S; Adeeb, S; Jomha, N M

    2014-01-01

    The main object of this study was to use a geometric morphometric approach to quantify the left-right symmetry of talus bones. Analysis was carried out using CT scan images of 11 pairs of intact tali. Two important geometric parameters, volume and surface area, were quantified for left and right talus bones. The geometric shape variations between the right and left talus bones were also measured using deviation analysis. Furthermore, location of asymmetry in the geometric shapes were identified. Numerical results showed that talus bones are bilaterally symmetrical in nature, and the difference between the surface area of the left and right talus bones was less than 7.5%. Similarly, the difference in the volume of both bones was less than 7.5%. Results of the three-dimensional (3D) deviation analyses demonstrated the mean deviation between left and right talus bones were in the range of -0.74 mm to 0.62 mm. It was observed that in eight of 11 subjects, the deviation in symmetry occurred in regions that are clinically less important during talus surgery. We conclude that left and right talus bones of intact human ankle joints show a strong degree of symmetry. The results of this study may have significance with respect to talus surgery, and in investigating traumatic talus injury where the geometric shape of the contralateral talus can be used as control. Cite this article: Bone Joint Res 2014;3:139-45.

  12. Evaluation of proton cross-sections for radiation sources in the proton accelerator

    NASA Astrophysics Data System (ADS)

    Cho, Young-Sik; Lee, Cheol-Woo; Lee, Young-Ouk

    2007-08-01

    Proton Engineering Frontier Project (PEFP) is currently building a proton accelerator in Korea which consists of a proton linear accelerator with 100 MeV of energy, 20 mA of current and various particle beam facilities. The final goal of this project consists of the production of 1 GeV proton beams, which will be used for various medical and industrial applications as well as for research in basic and applied sciences. Carbon and copper in the proton accelerator for PEPP, through activation, become radionuclides such as 7Be and 64Cu. Copper is a major element of the accelerator components and the carbon is planned to be used as a target material of the beam dump. A recent survey showed that the currently available cross-sections create a large difference from the experimental data in the production of some residual nuclides by the proton-induced reactions for carbon and copper. To more accurately estimate the production of radioactive nuclides in the accelerator, proton cross-sections for carbon and copper are evaluated. The TALYS code was used for the evaluation of the cross-sections for the proton-induced reactions. To obtain the cross-sections which best fits the experimental data, optical model parameters for the neutron, proton and other complex particles such as the deuteron and alpha were successively adjusted. The evaluated cross-sections in this study are compared with the measurements and other evaluations .

  13. Postcrania of the most primitive euprimate and implications for primate origins.

    PubMed

    Boyer, Doug M; Toussaint, Séverine; Godinot, Marc

    2017-10-01

    The fossil record of early primates is largely comprised of dentitions. While teeth can indicate phylogenetic relationships and dietary preferences, they say little about hypotheses pertaining to the positional behavior or substrate preference of the ancestral crown primate. Here we report the discovery of a talus bone of the dentally primitive fossil euprimate Donrussellia provincialis. Our comparisons and analyses indicate that this talus is more primitive than that of other euprimates. It lacks features exclusive to strepsirrhines, like a large medial tibial facet and a sloping fibular facet. It also lacks the medially positioned flexor-fibularis groove of extant haplorhines. In these respects, the talus of D. provincialis comes surprisingly close to that of the pen-tailed treeshrew, Ptilocercus lowii, and extinct plesiadapiforms for which tali are known. However, it differs from P. lowii and is more like other early euprimates in exhibiting an expanded posterior trochlear shelf and deep talar body. In overall form, the bone approximates more leaping reliant euprimates. The phylogenetically basal signal from the new fossil is confirmed with cladistic analyses of two different character matrices, which place D. provincialis as the most basal strepsirrhine when the new tarsal data are included. Interpreting our results in the context of other recent discoveries, we conclude that the lineage leading to the ancestral euprimate had already become somewhat leaping specialized, while certain specializations for the small branch niche came after crown primates began to radiate. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Symmetry analysis of talus bone

    PubMed Central

    Islam, K.; Dobbe, A.; Komeili, A.; Duke, K.; El-Rich, M.; Dhillon, S.; Adeeb, S.; Jomha, N. M.

    2014-01-01

    Objective The main object of this study was to use a geometric morphometric approach to quantify the left-right symmetry of talus bones. Methods Analysis was carried out using CT scan images of 11 pairs of intact tali. Two important geometric parameters, volume and surface area, were quantified for left and right talus bones. The geometric shape variations between the right and left talus bones were also measured using deviation analysis. Furthermore, location of asymmetry in the geometric shapes were identified. Results Numerical results showed that talus bones are bilaterally symmetrical in nature, and the difference between the surface area of the left and right talus bones was less than 7.5%. Similarly, the difference in the volume of both bones was less than 7.5%. Results of the three-dimensional (3D) deviation analyses demonstrated the mean deviation between left and right talus bones were in the range of -0.74 mm to 0.62 mm. It was observed that in eight of 11 subjects, the deviation in symmetry occurred in regions that are clinically less important during talus surgery. Conclusions We conclude that left and right talus bones of intact human ankle joints show a strong degree of symmetry. The results of this study may have significance with respect to talus surgery, and in investigating traumatic talus injury where the geometric shape of the contralateral talus can be used as control. Cite this article: Bone Joint Res 2014;3:139–45. PMID:24802391

  15. Simulation of prompt gamma-ray emission during proton radiotherapy.

    PubMed

    Verburg, Joost M; Shih, Helen A; Seco, Joao

    2012-09-07

    The measurement of prompt gamma rays emitted from proton-induced nuclear reactions has been proposed as a method to verify in vivo the range of a clinical proton radiotherapy beam. A good understanding of the prompt gamma-ray emission during proton therapy is key to develop a clinically feasible technique, as it can facilitate accurate simulations and uncertainty analysis of gamma detector designs. Also, the gamma production cross-sections may be incorporated as prior knowledge in the reconstruction of the proton range from the measurements. In this work, we performed simulations of proton-induced nuclear reactions with the main elements of human tissue, carbon-12, oxygen-16 and nitrogen-14, using the nuclear reaction models of the GEANT4 and MCNP6 Monte Carlo codes and the dedicated nuclear reaction codes TALYS and EMPIRE. For each code, we made an effort to optimize the input parameters and model selection. The results of the models were compared to available experimental data of discrete gamma line cross-sections. Overall, the dedicated nuclear reaction codes reproduced the experimental data more consistently, while the Monte Carlo codes showed larger discrepancies for a number of gamma lines. The model differences lead to a variation of the total gamma production near the end of the proton range by a factor of about 2. These results indicate a need for additional theoretical and experimental study of proton-induced gamma emission in human tissue.

  16. [Peripheral Factures of the Talus. Mid-Term Results].

    PubMed

    Peml, M; Kálal, P; Kopačka, P; Kloub, M

    2016-01-01

    to 5 by four (57%) patients. Arthritis in the talocrural and subtalar joints was evaluated as zero or grade 1 in 11 (79%) of all patients; of these 11 patients only two (14%) had a VAS score higher than 3. Only one patient had marginal wound necrosis; no deep wound infection was recorded. DISCUSSION The majority of fractures in our group were due to falls from a height or traffic accidents, which is in accordance with the literature data. In about 70% of these injuries, more parts of the leg are affected and, therefore, a thorough medical inspection is necessary. These mechanisms of injury most frequently produce type II LTP fracture (Hawkins classification). Four patients with a LTP fracture, who had the process partially removed, achieved good results on the AOFAS scale and the VAS score less than or equal to 3. As also published in the literature, the removal of small fragments has no crucial effect on ankle stability. CONSLUSIONS An adequate surgical treatment of displaced peripheral fractures of the talar processes provides good functional outcomes. In fractures with associated leg injuries or high-energy traumata, the prognosis is poorer. Fractures of talar processes often show symptoms and signs similar to those of more serious forms of dislocation of the talus and therefore a careful assessment of standard X-ray images taken for a "swollen ankle" is necessary. If the findings are not clear, CT examination is indicated. Key words: fracture, talus, processus lateralis tali, processus posterior tali.

  17. PREFACE: Continuum Models and Discrete Systems Symposia (CMDS-12)

    NASA Astrophysics Data System (ADS)

    Chakrabarti, Bikas K.

    2011-09-01

    Bardhan, Davide Bigoni, Andrej Cherkaev, Hikaru Kawamura, Subhasish Mazumder, Srutarshi Pradhan, Jacques Prost, Sriram Ramaswamy, Ping Sheng, Asok K Sen) were unable to contribute to this proceedings volume; on the other hand, although Kamal could not participate in the symposium, he contributed to the proceedings volume. We are grateful to Lucilla de Arcangelis, Kamal K Bardhan, Abhik Basu, Jayanta K Bhattacharjee, Andrej Cherkaev, Yilong Han, Alex Hansen, Takahiro Hatano, Esin Inan, Hikaru Kawamura, Pradeep K Mohanty, Akio Nakahara, Surajit Sengupta, Ping Sheng, Sujata Tarafdar and Uwe Tauber for reviewing the papers submitted to this proceedings volume. We would like to take this opportunity to thank all the members of the organizing committee and acknowledge the financial support received from the Centre for Applied Mathematics and Computational Science, Saha Institute of Nuclear Physics, Kolkata. We look forward to meeting you all at the next event in this series, CMDS 13, to be held in 2014/2015 in Utah, USA. Bikas K ChakrabartiChairman of CMDS 12Kolkata, 8 August 2011 Editors of the proceedings Abhik Basu abhik.basu@saha.ac.inBikas K Chakrabarti bikask.chakrabarti@saha.ac.inAnjan Kumar Chandra anjan.chandra@saha.ac.inSaha Institute of Nuclear Physics, Sector-I, Block - AF, Bidhannagar, Kolkata 700064, India

  18. High resolution measurements of the {sup 241}Am(n,2n) reaction cross section

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sage, C.; European Commission, Joint Research Centre, Institute for Reference Materials and Measurements, Retieseweg 111, B-2440 Geel; Commissariat a L'Energie Atomique Cadarache, DEN/CAD/DER/SPRC/LEPh, F-13108 St Paul-lez-Durance

    Measurements of the {sup 241}Am(n,2n) reaction cross section have been performed at the Joint Research Centre (JRC) Geel in the frame of a collaboration between the European Commission (EC) JRC and French laboratories from CNRS and the Commissariat a L'Energie Atomique (CEA) Cadarache. Raw material coming from the Atalante facility of CEA Marcoule has been transformed by JRC Karlsruhe into suitable {sup 241}AmO{sub 2} samples embedded in Al{sub 2}O{sub 3} matrices specifically designed for these measurements. The irradiations were carried out at the 7-MV Van de Graaff accelerator. The {sup 241}Am(n,2n) reaction cross section was determined relative to the {supmore » 27}Al(n,alpha){sup 24}Na standard cross section. The measurements were performed in four sessions, using quasi-mono-energetic neutrons with energies ranging from 8 to 21 MeV produced via the {sup 2}H(d,n){sup 3}He and the {sup 3}H(d,n){sup 4}He reactions. The induced activity was measured by standard gamma-ray spectrometry using a high-purity germanium detector. Below 15 MeV, the present results are in agreement with data obtained earlier. Above 15 MeV, these measurements allowed the experimental investigation of the {sup 241}Am(n,2n) reaction cross section for the first time. The present data are in good agreement with predictions obtained with the talys code that uses an optical and fission model developed at CEA.« less

  19. [Atmospheric non-methane hydrocarbons near plants of crude oil first treatment].

    PubMed

    Bustaffa, Elisa; De Marinis Loiotile, Annamaria; Farella, Genoveffa; Petraccone, Stefania; De Gennaro, Gianluigi; Bianchi, Fabrizio

    2016-01-01

    La continua espansione delle attività di perforazione ai fini dell'estrazione petrolifera in prossimità di aree abitate ha fatto sì che negli ultimi anni l'attenzione si focalizzasse sull'impatto di questo processo fortemente industrializzato sulla salute pubblica. Le comunità che vivono nei dintorni di impianti di questo tipo devono, infatti, fronteggiare diversi problemi, quali l'inquinamento atmosferico e acustico, la contaminazione del suolo e delle acque sotterranee, il traffico dei camion da e verso il sito, incidenti e malfunzionamenti all'interno dell'impianto. In questo contesto, la valutazione del rischio per la salute è ostacolata dal fatto che l'esposizione alle sostanze chimiche presenti non può essere valutata in via definitiva, poiché non sempre si è a conoscenza di tutti i composti immessi nell'ambiente né delle loro concentrazioni, per non parlare del problema delle coesposizioni ad altri inquinanti. Nonostante l'oramai conclamato e vasto interesse generato da questo argomento, ad oggi esistono pochi studi basati su popolazioni riguardanti gli effetti sulla salute delle comunità che vivono in prossimità dei siti di perforazione ed estrazione; ciò genera la necessità di condurre campagne di monitoraggio mirate e studi epidemiologici che verifichino l'eventuale esistenza e natura di pattern di malattie associati a tali attività. La presente rassegna bibliografica individua, quindi, i principali inquinanti atmosferici presenti in prossimità di un impianto di primo trattamento del greggio e cerca di fornire un quadro generale delle loro potenziali sorgenti e caratteristiche.

  20. Cross section measurement of alpha particle induced nuclear reactions on natural cadmium up to 52MeV.

    PubMed

    Ditrói, F; Takács, S; Haba, H; Komori, Y; Aikawa, M

    2016-12-01

    Cross sections of alpha particle induced nuclear reactions have been measured on thin natural cadmium targets foils in the energy range from 11 to 51.2MeV. This work was a part of our systematic study on excitation functions of light ion induced nuclear reactions on different target materials. Regarding the cross sections, the alpha induced reactions are not deeply enough investigated. Some of the produced isotopes are of medical interest, others have application in research and industry. The radioisotope 117m Sn is a very important theranostic (therapeutic + diagnostic) radioisotope, so special care was taken to the results for that isotope. The well-established stacked foil technique followed by gamma-spectrometry with HPGe gamma spectrometers were used. The target and monitor foils in the stack were commercial high purity metal foils. From the irradiated targets 117m Sn, 113 Sn, 110 Sn, 117m,g In, 116m In, 115m In, 114m In, 113m In, 111 In, 110m,g In, 109m In, 108m,g In, 115g Cd and 111m Cd were identified and their excitation functions were derived. The results were compared with the data of the previous measurements from the literature and with the results of the theoretical nuclear reaction model code calculations TALYS 1.8 (TENDL-2015) and EMPIRE 3.2 (Malta). From the cross section curves thick target yields were calculated and compared with the available literature data. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. STANDARD BIG BANG NUCLEOSYNTHESIS UP TO CNO WITH AN IMPROVED EXTENDED NUCLEAR NETWORK

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Coc, Alain; Goriely, Stephane; Xu, Yi

    Primordial or big bang nucleosynthesis (BBN) is one of the three strong pieces of evidence for the big bang model together with the expansion of the universe and cosmic microwave background radiation. In this study, we improve the standard BBN calculations taking into account new nuclear physics analyses and enlarge the nuclear network up to sodium. This is, in particular, important to evaluate the primitive value of CNO mass fraction that could affect Population III stellar evolution. For the first time we list the complete network of more than 400 reactions with references to the origin of the rates, includingmore » Almost-Equal-To 270 reaction rates calculated using the TALYS code. Together with the cosmological light elements, we calculate the primordial beryllium, boron, carbon, nitrogen, and oxygen nuclei. We performed a sensitivity study to identify the important reactions for CNO, {sup 9}Be, and boron nucleosynthesis. We re-evaluated those important reaction rates using experimental data and/or theoretical evaluations. The results are compared with precedent calculations: a primordial beryllium abundance increase by a factor of four compared to its previous evaluation, but we note a stability for B/H and for the CNO/H abundance ratio that remains close to its previous value of 0.7 Multiplication-Sign 10{sup -15}. On the other hand, the extension of the nuclear network has not changed the {sup 7}Li value, so its abundance is still 3-4 times greater than its observed spectroscopic value.« less

  2. Scienza dei servizi

    NASA Astrophysics Data System (ADS)

    Cavenago, Dario; Mezzanzanica, Mario

    I servizi sono oramai centrali nella vita sociale di ogni Paese. L'aspettativa di ogni attore sociale, sia esso cittadino/utente e/o istituzione, è quella di ricevere da uno scambio che ha alla base un servizio un contributo che si caratterizza per una qualità intrinseca. Il mantenimento di tale promessa richiede all'azienda erogatrice un forte coinvolgimento, nel disegno del servizio, degli utenti ed una capacità di gestione della conoscenza; ciò è particolarmente significativo per quei servizi che si caratterizzano per una forte personalizzazione o complessità progettuale. Disegnare un servizio, metterlo in produzione e gestirne l'erogazione ha una complessità variabile in base al grado di coinvolgimento dei destinati ed alle dimensioni critiche che esprimono le condizioni di fattibilità di un servizio di qualità appropriato alle attese degli utilizzatori. Ugualmente la globalizzazione dell'economia e la scarsità delle risorse ha portato l'attenzione, ai fini della sostenibilità delle condizioni sopra richiamate, di una ricerca di modelli e strumenti che permettano una valutazione e una standardizzazione dei processi di produzione ed erogazione secondo condizioni di economicità. Tali primi e sintetici elementi hanno condotto diversi attori istituzionali, grandi imprese ed università attraverso i loro centri di ricerca, ad una azione di riflessione sul grado di "ingegnerizzazione" dei processi sottesi alla erogazione dei servizi ed in particolare ai servizi che attuano le politiche dei grandi settori di base dell'economia di una Nazione: educazione, sanità, sociale, sviluppo infrastrutture ecc.

  3. Air ambulance and hospital services for critically ill and injured in Greenland, Iceland and the Faroe Islands: how can we improve?

    PubMed Central

    Gunnarsson, Björn; Jensen, Niels S Kieler; Garði, Tummas i; Harðardóttir, Helga; Stefánsdóttir, Lilja; Heimisdóttir, María

    2015-01-01

    The Nordic Atlantic Cooperation (NORA) is an intergovernmental organization under the auspices of the Nordic Council of Ministers. The NORA region comprises Greenland, Iceland, Faroe Islands and western coastal areas of Norway. Historical, cultural and institutional links bind these nations together in multiple ways, and regional co-operation has in recent years become a focus of interest. This commentary addresses air medical services (AMSs) and available advanced hospital services in the 3 smallest NORA countries challenged sparse populations, hereafter referred to as the region. It seems likely that strengthened regional co-operation can help these countries to address common challenges within health care by exchanging know-how and best practices, pooling resources and improving the efficiency of care delivery. The 4 largest hospitals in the region, Dronning Ingrids Hospital in Nuuk (Greenland), Landspítali in Reykjavík and Sjúkrahúsið á Akureyri, (both in Iceland) and Landssjúkrahúsið Tórshavn on the Faroe Islands, have therefore undertaken the project Network for patient transport in the North-West Atlantic (in Danish: Netværk for patienttransport i Vest-Norden). The goal of the project, and of this article, is to exchange information and provide an overview of current AMSs and access to acute hospital care for severely ill or injured patients in the 3 participating countries. Of equal importance is the intention to highlight the need for increased regional co-operation to optimize use of limited resources in the provision of health care services. PMID:26066019

  4. Neandertal talus bones from El Sidrón site (Asturias, Spain): A 3D geometric morphometrics analysis.

    PubMed

    Rosas, Antonio; Ferrando, Anabel; Bastir, Markus; García-Tabernero, Antonio; Estalrrich, Almudena; Huguet, Rosa; García-Martínez, Daniel; Pastor, Juan Francisco; de la Rasilla, Marco

    2017-10-01

    The El Sidrón tali sample is assessed in an evolutionary framework. We aim to explore the relationship between Neandertal talus morphology and body size/shape. We test the hypothesis 1: talar Neandertal traits are influenced by body size, and the hypothesis 2: shape variables independent of body size correspond to inherited primitive features. We quantify 35 landmarks through 3D geometric morphometrics techniques to describe H. neanderthalensis-H. sapiens shape variation, by Mean Shape Comparisons, Principal Component, Phenetic Clusters, Minimum spanning tree analyses and partial least square and regression of talus shape on body variables. Shape variation correlated to body size is compared to Neandertals-Modern Humans (MH) evolutionary shape variation. The Neandertal sample is compared to early hominins. Neandertal talus presents trochlear hypertrophy, a larger equality of trochlear rims, a shorter neck, a more expanded head, curvature and an anterior location of the medial malleolar facet, an expanded and projected lateral malleolar facet and laterally expanded posterior calcaneal facet compared to MH. The Neandertal talocrural joint morphology is influenced by body size. The other Neandertal talus traits do not co-vary with it or not follow the same co-variation pattern as MH. Besides, the trochlear hypertrophy, the trochlear rims equality and the short neck could be inherited primitive features; the medial malleolar facet morphology could be an inherited primitive feature or a secondarily primitive trait; and the calcaneal posterior facet would be an autapomorphic feature of the Neandertal lineage. © 2017 Wiley Periodicals, Inc.

  5. New production cross sections for the theranostic radionuclide 67Cu

    NASA Astrophysics Data System (ADS)

    Pupillo, Gaia; Sounalet, Thomas; Michel, Nathalie; Mou, Liliana; Esposito, Juan; Haddad, Férid

    2018-01-01

    The cross sections of the 68Zn(p,2p)67Cu, 68Zn(p,2n)67Ga and 68Zn(p,3n)66Ga reactions were measured at the ARRONAX facility by using the 70 MeV cyclotron, with particular attention to the production of the theranostic radionuclide 67Cu. Enriched 68Zn material was electroplated on silver backing and exposed to a low-intensity proton beam by using the stacked-foils target method. Since 67Cu and 67Ga radionuclides have similar half-lives and same γ-lines (they both decay to 67Zn), a radiochemical process aimed at Cu/Ga separation was mandatory to avoid interferences in γ-spectrometry measurements. A simple chemical procedure having a high separation efficiency (>99%) was developed and monitored during each foil processing, thanks to the tracer isotopes 61Cu and 66Ga. Nuclear cross sections were measured in the energy range 35-70 MeV by using reference reactions recommended by the International Atomic Energy Agency (IAEA) to monitor beam flux. In comparison with literature data a general good agreement on the trend of the nuclear reactions was noted, especially with latest measurements, but slightly lower values were obtained in case of 67Cu. Experimental results of the 68Zn(p,2p)67Cu, 68Zn(p,2n)67Ga and 68Zn(p,3n)66Ga reactions were also compared with the theoretical values estimated by using the software TALYS. The production yield of the theranostic radionuclide 67Cu was estimated considering the results obtained in this work.

  6. Subgroup A : nuclear model codes report to the Sixteenth Meeting of the WPEC

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Talou, P.; Chadwick, M. B.; Dietrich, F. S.

    2004-01-01

    The Subgroup A activities focus on the development of nuclear reaction models and codes, used in evaluation work for nuclear reactions from the unresolved energy region up to the pion threshold production limit, and for target nuclides from the low teens and heavier. Much of the efforts are devoted by each participant to the continuing development of their own Institution codes. Progresses in this arena are reported in detail for each code in the present document. EMPIRE-II is of public access. The release of the TALYS code has been announced for the ND2004 Conference in Santa Fe, NM, October 2004.more » McGNASH is still under development and is not expected to be released in the very near future. In addition, Subgroup A members have demonstrated a growing interest in working on common modeling and codes capabilities, which would significantly reduce the amount of duplicate work, help manage efficiently the growing lines of existing codes, and render codes inter-comparison much easier. A recent and important activity of the Subgroup A has therefore been to develop the framework and the first bricks of the ModLib library, which is constituted of mostly independent pieces of codes written in Fortran 90 (and above) to be used in existing and future nuclear reaction codes. Significant progresses in the development of ModLib have been made during the past year. Several physics modules have been added to the library, and a few more have been planned in detail for the coming year.« less

  7. Measurements of the talus in the assessment of population affinity.

    PubMed

    Bidmos, Mubarak A; Dayal, Manisha R; Adegboye, Oyelola A

    2018-06-01

    As part of their routine work, forensic anthropologists are expected to report population affinity as part of the biological profile of an individual. The skull is the most widely used bone for the estimation of population affinity but it is not always present in a forensic case. Thus, other bones that preserve well have been shown to give a good indication of either the sex or population affinity of an individual. In this study, the potential of measurements of the talus was investigated for the purpose of estimating population affinity in South Africans. Nine measurements from two hundred and twenty tali of South African Africans (SAA) and South African Whites (SAW) from the Raymond A. Dart Collection of Human Skeletons were used. Direct and step-wise discriminant function and logistic regression analyses were carried out using SPSS and SAS. Talar length was the best single variable for discriminating between these two groups for males while in females the head height was the best single predictor. Average accuracies for correct population affinity classification using logistic regression analysis were higher than those obtained from discriminant function analysis. This study was the first of its type to employ discriminant function analyses and logistic regression analyses to estimate the population affinity of an individual from the talus. Thus these equations can now be used by South African anthropologists when estimating the population affinity of dismembered or damaged or incomplete skeletal remains of SAA and SAW. Copyright © 2018 Elsevier B.V. All rights reserved.

  8. Sensitivity of the Oxford Foot Model to marker misplacement: A systematic single-case investigation.

    PubMed

    Carty, Christopher P; Walsh, Henry P J; Gillett, Jarred G

    2015-09-01

    The purpose of this paper was to systematically assess the effect of Oxford Foot Model (OFM) marker misplacement on hindfoot relative to tibia, and forefoot relative to hindfoot kinematic calculations during the stance phase of gait. Marker trajectories were recorded with an 8-camera motion analysis system (Vicon Motion Systems Ltd., UK) and ground reaction forces were recorded from three force platforms (AMTI, USA). A custom built marker cluster consisting of 4 markers in a square arrangement (diagonal distance 2 cm) was used to assess the effect of marker misplacement in the superior, inferior, anterior and posterior direction for the sustentaculum tali (STL), the proximal 1st metatarsal (P1M), distal 5th metatarsal (D5M), proximal 5th metatarsal (P5M) and lateral calcaneus (LCA) markers. In addition manual movement of the heel complex 1 cm superiorly, inferiorly, medially and laterally, and also an alignment error of 10° inversion and 10° eversion was assessed. Clinically meaningful effects of marker misplacement were determined using a threshold indicating the minimal clinically important difference. Misplacement of the heel-wand complex had the most pronounced effect on mean kinematic profiles during the stance phase across all degrees-of-freedom with respect to hindfoot-tibia and forefoot-hindfoot angles. Vertical marker misplacement of the D5M and P5M markers affected the sagittal plane, and to a lesser extent frontal plane, forefoot-hindfoot kinematics. In conclusion, the OFM is highly sensitive to misplacement of the heel-wand complex in all directions and the P5M marker in the vertical direction. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

  9. First cross-section measurements of the reactions Ag,109107(p ,γ )Cd,110108 at energies relevant to the p process

    NASA Astrophysics Data System (ADS)

    Khaliel, A.; Mertzimekis, T. J.; Asimakopoulou, E.-M.; Kanellakopoulos, A.; Lagaki, V.; Psaltis, A.; Psyrra, I.; Mavrommatis, E.

    2017-09-01

    Background: One of the primary objectives of the field of Nuclear Astrophysics is the study of the elemental and isotopic abundances in the universe. Although significant progress has been made in understanding the mechanisms behind the production of a large number of nuclides in the isotopic chart, there are still many open questions regarding a number of neutron-deficient nuclei, the p nuclei. To that end, experimentally deduced nuclear reaction cross sections can provide invaluable input to astrophysical models. Purpose: The reactions Ag,109107(p ,γ )Cd,110108 have been studied at energies inside the astrophysically relevant energy window in an attempt to provide experimental data required for the testing of reaction-rate predictions in terms of the statistical model of Hauser-Feshbach around the p nucleus 108Cd. Methods: The experiments were performed with in-beam γ -ray spectroscopy with proton beams accelerated by the Tandem Van de Graaff Accelerator at NCSR "Demokritos" impinging a target of natural silver. A set of high-purity germanium detectors was employed to record the emitted radiation. Results: A first set of total cross-section measurements in radiative proton-capture reactions involving Ag,109107, producing the p -nucleus 108Cd, inside the astrophysically relevant energy window is reported. The experimental results are compared to theoretical calculations, using talys. An overall good agreement between the data and the theoretical calculations has been found. Conclusions: The results reported in this work add new information to the relatively unexplored p process. The present measurements can serve as a reference point in understanding the nuclear parameters in the related astrophysical environments and for future theoretical modeling and experimental works.

  10. Conarticular congruence of the hominoid subtalar joint complex with implications for joint function in Plio-Pleistocene hominins.

    PubMed

    Prang, Thomas C

    2016-07-01

    The purpose of this study is to test the hypothesis that conarticular surfaces areas and curvatures are correlates of mobility at the hominoid talocalcaneal and talonavicular joints. Articular surface areas and curvatures of the talonavicular, anterior talocalcaneal, and posterior talocalcaneal joints were quantified using a total of 425 three-dimensional surface models of extant hominoid and fossil hominin tali, calcanei, and naviculars. Quadric surface fitting was used to calculate curvatures, pairwise comparisons were used to evaluate statistical differences between taxa, and regression was used to test for the effects of allometry. Pairwise comparisons show that the distributions of values for joint curvature indices follow the predicted arboreal-terrestrial morphocline in hominoid primates with no effect of body mass (PGLS p > 0.05). OH 8 (Homo habilis) and LB 1 (Homo floresiensis) can be accommodated within the range of human variation for the talonavicular joint, whereas MH2 (Australopithecus sediba) falls within the ranges of variation for Pan troglodytes and Gorilla gorilla in measures of posterior talocalcaneal joint congruity. Joint curvature indices are better discriminators than joint surface area indices, which may reflect a greater contribution of rotation, rather than translation, to joint movement in plantigrade taxa due to discrepancies in conarticular congruence and the "convex-concave" rule. The pattern of joint congruence in Au. sediba contributes to other data on the foot and ankle suggesting that the lateral side of the foot was more mobile than the medial side, which is consistent with suggestions of increased medial weight transfer associated with hyperpronation. Am J Phys Anthropol 160:446-457, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  11. Effective dose to immuno-PET patients due to metastable impurities in cyclotron produced zirconium-89

    NASA Astrophysics Data System (ADS)

    Alfuraih, Abdulrahman; Alzimami, Khalid; Ma, Andy K.; Alghamdi, Ali; Al Jammaz, Ibrahim

    2014-11-01

    Immuno-PET is a nuclear medicine technique that combines positron emission tommography (PET) with radio-labeled monoclonal antibodies (mAbs) for tumor characterization and therapy. Zirconium-89 (89Zr) is an emerging radionuclide for immuno-PET imaging. Its long half-life (78.4 h) gives ample time for the production, the administering and the patient uptake of the tagged radiopharmaceutical. Furthermore, the nuclides will remain in the tumor cells after the mAbs are catabolized so that time series studies are possible without incurring further administration of radiopharmarceuticals. 89Zr can be produced in medical cyclotrons by bombarding an yttrium-89 (89Y) target with a proton beam through the 89Y(p,n)89Zr reaction. In this study, we estimated the effective dose to the head and neck cancer patients undergoing 89Zr-based immune-PET procedures. The production of 89Zr and the impurities from proton irradiation of the 89Y target in a cyclotron was calculated with the Monte Carlo code MCNPX and the nuclear reaction code TALYS. The cumulated activities of the Zr isotopes were derived from real patient data in literature and the effective doses were estimated using the MIRD specific absorbed fraction formalism. The estimated effective dose from 89Zr is 0.5±0.2 mSv/MBq. The highest organ dose is 1.8±0.2 mSv/MBq in the liver. These values are in agreement with those reported in literature. The effective dose from 89mZr is about 0.2-0.3% of the 89Zr dose in the worst case. Since the ratio of 89mZr to 89Zr depends on the cooling time as well as the irradiation details, contaminant dose estimation is an important aspect in optimizing the cyclotron irradiation geometry, energy and time.

  12. The evolution of the platyrrhine talus: A comparative analysis of the phenetic affinities of the Miocene platyrrhines with their modern relatives.

    PubMed

    Püschel, Thomas A; Gladman, Justin T; Bobe, René; Sellers, William I

    2017-10-01

    Platyrrhines are a diverse group of primates that presently occupy a broad range of tropical-equatorial environments in the Americas. However, most of the fossil platyrrhine species of the early Miocene have been found at middle and high latitudes. Although the fossil record of New World monkeys has improved considerably over the past several years, it is still difficult to trace the origin of major modern clades. One of the most commonly preserved anatomical structures of early platyrrhines is the talus. This work provides an analysis of the phenetic affinities of extant platyrrhine tali and their Miocene counterparts through geometric morphometrics and a series of phylogenetic comparative analyses. Geometric morphometrics was used to quantify talar shape affinities, while locomotor mode percentages (LMPs) were used to test if talar shape is associated with locomotion. Comparative analyses were used to test if there was convergence in talar morphology, as well as different models that could explain the evolution of talar shape and size in platyrrhines. Body mass predictions for the fossil sample were also computed using the available articular surfaces. The results showed that most analyzed fossils exhibit a generalized morphology that is similar to some 'generalist' modern species. It was found that talar shape covaries with LMPs, thus allowing the inference of locomotion from talar morphology. The results further suggest that talar shape diversification can be explained by invoking a model of shifts in adaptive peak to three optima representing a phylogenetic hypothesis in which each platyrrhine family occupied a separate adaptive peak. The analyses indicate that platyrrhine talar centroid size diversification was characterized by an early differentiation related to a multidimensional niche model. Finally, the ancestral platyrrhine condition was reconstructed as a medium-sized, generalized, arboreal, quadruped. Copyright © 2017 The Authors. Published by

  13. The new intra-articular calcaneal fracture classification system in term of sustentacular fragment configurations and incorporation of posterior calcaneal facet fractures with fracture components of the calcaneal body.

    PubMed

    Harnroongroj, Thossart; Harnroongroj, Thos; Suntharapa, Thongchai; Arunakul, Marut

    2016-10-01

    The aim of this study was to develop a new calcaneal fracture classification system which will consider sustentacular fragment configuration and relation of posterior calcaneal facet to calcaneal body. The new classification system used sustentacular fragment configuration and relation of posterior calcaneal facet fracture with fracture components of calcaneal body as key aspects of main types and subtypes. Between 2000 and 2014, 126 intraarticular calcaneal fractures were classified according to the new classification system by using computed tomography images. The new classification system was studied in term of reliability, correlation to choices of treatment, implant fixation and quality of fracture reduction. Types of sustentacular fragment comprised type A, B and C. Type A sustentacular fragment included sustentacular tali containing middle calcaneal facet. In Type B and C fractures sustentacular fragment included medial aspect and entire posterior calcaneal facet as a single unit, respectively. The fractures with type A, B and C sustentacular fragments were classified as main type A, B and C intra-articular calcaneal fractures. The main type A and B comprised 4 subtypes. Subtypes A1, A3, B1, and B3 associated with avulsion and bending fragments of calcaneal body. Subtype A2, B2, and B4 associated with burst calcaneal body. Subtype B4 was not found in the study. Main type C had no subtype and associated with burst calcaneal body. The data showed good reliability. The study showed that our new intra-articular calcaneal fracture classification system correlates to choices of treatment, implant fixation and quality of fracture reduction. Level IV, Study of Diagnostic Test. Copyright © 2016 Turkish Association of Orthopaedics and Traumatology. Production and hosting by Elsevier B.V. All rights reserved.

  14. Isomeric yield ratios of 87m,gY from different nuclear reactions

    NASA Astrophysics Data System (ADS)

    Naik, H.; Kim, G. N.; Kim, K.; Zaman, M.; Sahid, M.; Yang, S.-C.; Lee, M. W.; Kang, Y. R.; Shin, S. G.; Cho, M.-H.; Goswami, A.; Song, T. Y.

    2014-07-01

    The independent isomeric yield ratios of 87m,gY produced from the 93Nb( γ, α2n) and natZr( γ, p xn) reactions with the end-point bremsstrahlung energy of 45-70 MeV have been determined by an off-line γ-ray spectrometric technique using 100 MeV electron linac at the Pohang accelerator laboratory, Korea. The isomeric yield ratios of 87m,gY were also determined from the natZr(p, αxn) and the 89Y(p,p2n) reactions with E P = 15-45 MeV as well as those from the 89Y( α, α2n) reaction with E α = 32-43 MeV using the MC-50 cyclotron at the Korea Institute of Radiological and Medical Science, Korea. The isomeric yield ratios of 87m,gY from the present work in the 93Nb( γ, α2n), natZr( γ, p xn), natZr(p, αxn), 89Y(p,p2n), and 89Y( α, α2n) reactions were compared with those of the literature data in the 85Rb( α, 2n), the 86,87,88Sr(d, xn), 89Y(n,3n), and the 89Y( γ, 2n) reactions to examine the role of target, projectiles, and ejectiles through compound nucleus excitation energy and input angular momentum. The isomeric yield ratios of 87m,gY in the above eleven reactions were also calculated using the computer code TALYS 1.4 and compared with the experimental data. The different behaviors between photon- and neutron-induced reactions and charged-particle-induced reactions are discussed from the viewpoint of compound and non-compound (pre-equilibrium) process.

  15. Talar dome detection and its geometric approximation in CT: Sphere, cylinder or bi-truncated cone?

    PubMed

    Huang, Junbin; Liu, He; Wang, Defeng; Griffith, James F; Shi, Lin

    2017-04-01

    The purpose of our study is to give a relatively objective definition of talar dome and its shape approximations to sphere (SPH), cylinder (CLD) and bi-truncated cone (BTC). The "talar dome" is well-defined with the improved Dijkstra's algorithm, considering the Euclidean distance and surface curvature. The geometric similarity between talar dome and ideal shapes, namely SPH, CLD and BTC, is quantified. 50 unilateral CT datasets from 50 subjects with no pathological morphometry of tali were included in the experiments and statistical analyses were carried out based on the approximation error. The similarity between talar dome and BTC was more prominent, with smaller mean, standard deviation, maximum and median of the approximation error (0.36±0.07mm, 0.32±0.06mm, 2.24±0.47mm and 0.28±0.06mm) compare with fitting to SPH and CLD. In addition, there were significant differences between the fitting error of each pair of models in terms of the 4 measurements (p-values<0.05). The linear regression analyses demonstrated high correlation between CLD and BTC approximations (R 2 =0.55 for median, R 2 >0.7 for others). Color maps representing fitting error indicated that fitting error mainly occurred on the marginal regions of talar dome for SPH and CLD fittings, while that of BTC was small for the whole talar dome. The successful restoration of ankle functions in displacement surgery highly depends on the comprehensive understanding of the talus. The talar dome surface could be well-defined in a computational way and compared to SPH and CLD, the talar dome reflects outstanding similarity with BTC. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Measurement of the 2H(7Be, 6Li)3He reaction rate and its contribution to the primordial lithium abundance

    NASA Astrophysics Data System (ADS)

    Li, Er-Tao; Li, Zhi-Hong; Yan, Sheng-Quan; Su, Jun; Guo, Bing; Li, Yun-Ju; Wang, You-Bao; Lian, Gang; Zeng, Sheng; Chen, Si-Zhe; Ma, Shao-Bo; Li, Xiang-Qing; He, Cao; Sun, Hui-Bin; Liu, Wei-Ping

    2018-04-01

    In the standard Big Bang nucleosynthesis (SBBN) model, the lithium puzzle has attracted intense interest over the past few decades, but still has not been solved. Conventionally, the approach is to include more reactions flowing into or out of lithium, and study the potential effects of those reactions which were not previously considered. 7Be(d, 3He)6Li is a reaction that not only produces 6Li but also destroys 7Be, which decays to 7Li, thereby affecting 7Li indirectly. Therefore, this reaction could alleviate the lithium discrepancy if its reaction rate is sufficiently high. However, there is not much information available about the 7Be(d, 3He)6Li reaction rate. In this work, the angular distributions of the 7Be(d, 3He)6Li reaction are measured at the center of mass energies E cm = 4.0 MeV and 6.7 MeV with secondary 7Be beams for the first time. The excitation function of the 7Be(d, 3He)6Li reaction is first calculated with the computer code TALYS and then normalized to the experimental data, then its reaction rate is deduced. A SBBN network calculation is performed to investigate its influence on the 6Li and 7Li abundances. The results show that the 7Be(d, 3He)6Li reaction has a minimal effect on 6Li and 7Li because of its small reaction rate. Therefore, the 7Be(d, 3He)6Li reaction is ruled out by this experiment as a means of alleviating the lithium discrepancy. Supported by National Natural Science Foundation of China (11375269, 11505117, 11490560, 11475264, 11321064), Natural Science Foundation of Guangdong Province (2015A030310012), 973 program of China (2013CB834406) and National key Research and Development Province (2016YFA0400502)

  17. Green tea extract induces protective autophagy in A549 non-small lung cancer cell line.

    PubMed

    Izdebska, Magdalena; Klimaszewska-Wiśniewska, Anna; Hałas, Marta; Gagat, Maciej; Grzanka, Alina

    2015-12-31

    For many decades, polyphenols, including green tea extract catechins, have been reported to exert multiple anti-tumor activities. However, to date the mechanisms of their action have not been completely elucidated. Thus, the aim of this study was to assess the effect of green tea extract on non-small lung cancer A549 cells. A549 cells following treatment with GTE were analyzed using the inverted light and fluorescence microscope. In order to evaluate cell sensitivity and cell death, the MTT assay and Tali image-based cytometer were used, respectively. Ultrastructural alterations were assessed using a transmission electron microscope. The obtained data suggested that GTE, even at the highest dose employed (150 μM), was not toxic to A549 cells. Likewise, the treatment with GTE resulted in only a very small dose-dependent increase in the population of apoptotic cells. However, enhanced accumulation of vacuole-like structures in response to GTE was seen at the light and electron microscopic level. Furthermore, an increase in the acidic vesicular organelles and LC3-II puncta formation was observed under the fluorescence microscope, following GTE treatment. The analysis of the functional status of autophagy revealed that GTE-induced autophagy may provide self-protection against its own cytotoxicity, since we observed that the blockage of autophagy by bafilomycin A1 decreased the viability of A549 cells and potentiated necrotic cell death induction in response to GTE treatment. Collectively, our results revealed that A549 cells are insensitive to both low and high concentrations of the green tea extract, probably due to the induction of cytoprotective autophagy. These data suggest that a potential utility of GTE in lung cancer therapy may lie in its synergistic combinations with drugs or small molecules that target autophagy, rather than in monotherapy.

  18. Review on Bamboo Utilization as Biocomposites, Pulp and Bioenergy

    NASA Astrophysics Data System (ADS)

    Yusuf, Sulaeman; Syamani, F. A.; Fatriasari, W.; Subyakto

    2018-03-01

    One of potential non wood bioresources utilized in industrial application is bamboos. Bamboos are include in graminae family which have high biomass productivity, easy and rapid production, wide avability and high holocellulose content. Indonesia has a huge potential of bamboos, more than 162 bamboo species are found however only some of them are planted that have a high economic value. Bamboos have some advantages such as can be harvested at 3 years, straight culm, high strength, easy to be processed, and relatively cheap. Research Center for Biomaterials has developed utilization of bamboo culm for ply bamboo product as alternative of plywood since 1995, using gombong bamboo, tali bamboo, sembilang bamboo, andong bamboo with PF resin as adhesive. Other biocomposite products from bamboos include particle board, cement board and polymer-bamboo fiber composites. In term of processing technique and final product quality, bamboo composites from ply bamboo are the most prospectable material to be utilized in industrial application. Yellow bamboo and betung bamboo have also been developed as pulp and paper. Biopulping using soda and kraft pulping after biological pretreatment using white rot fungi to remove lignin was used as pulping method in this conversion. Biokraft pulping with Trametes versicolor for 45 days with inoculum loading of 10% resulted better pulp quality compared to the other fungi. Betung bamboo had good morphological characteristics and chemical component content to be converted into bioenergy such as bioethanol. Several pretreatment methods have been developed in order to result high sugar yield. Microwave assisted acid hydrolysis was preferedin producing higher yield from the pretreated bamboo compared to enzymatic hydrolysis. By using this method, the bamboo pretreated by biological-microwave pretreatment results higher improvement to increase sugar yield.

  19. Diversity and Utilization of Bamboo Plants in The Area of Hotel in Kedewatan Village, Ubud, Bali

    NASA Astrophysics Data System (ADS)

    Utami, N. W. F.; Pradnyawathi, N. L. M.

    2017-10-01

    Bamboo or tiying (Balinese language) is a widely used non-timber plant in Indonesia especially in Bali. The presence of bamboo appertains to its ethno-botanical function of bamboo especially for rituals. However, there are other utilization of bamboo which is naturally grown or intentionally planted. Kedewatan as a famous place in northern Ubud, Bali have many lavish hotels with its natural environment and appealing place. The aims of this study is to invent bamboo species diversity and bamboo utilization on private areas of hotel in Kedewatan. Methods used in this study was field survey with observation and interview technic. Observation was implemented by purposive sampling methods by selecting hotel which adjacent to Ayung and Wos rivers. Interview was conducted with some key persons in charge on managing hotel garden. In addition, bamboo species identification was established through literature study. The results show that there are eleven bamboo species found on the survey area with most commonly employed species in the area were tiying tali (Gigantochloa apus (J.A. & J.H. Schultes) Kurz.) and tiying gading (Phyllostachys sulphurea (Carr.) A. e.t. C. Riv.) which were belong to exotic species. The areas which bamboo cultivated were welcome area as a hedgerow and near hotel lobby, between, outside and inside villa buildings, and naturally grown in the riverbanks with a good landscaping arrangement. Bamboo plantations were utilized to adorn and support the quality of the hotel building as well as to conserve soil and water along Ayung and Wos river canyons. The other utilization of bamboo was to facilitate ritual activity in Kedewatan village. They are allowed to ask for limited amount of bamboo culms with condition not to damage the physical appearance and function that desired by the hotel manager or hotel owner.

  20. Snow avalanche activity in the High Tatras Mountains: new data achieved by means of dendrogeomorphic methods

    NASA Astrophysics Data System (ADS)

    Tichavsky, R.

    2016-12-01

    The High Tatras Mountains are permanently affected by the occurrence of hazardous geomorphic processes. Snow avalanches represent a common hazard that threatens the infrastructure and humans living and visiting the mountains. So far, the spatio-temporal reconstruction of snow avalanche histories was based only on existing archival records, orthophoto interpretation and lichenometric dating in the High Tatras Mountains. Dendrogeomorphic methods allow for the intra-seasonal dating of scars on tree stems and branches and have been broadly used for the dating of snow avalanche events all over the world. We extracted the increment cores and cross sections from 189 individuals of Pinus mugo var. mugo growing on four tali in the Great Cold Valley and dated all the past scars that could correspond with the winter to early spring occurrence of snow avalanches. The dating was supported by the visual analysis of three orthophoto images from 2004, 2009 and 2014. In total, nineteen event years of snow avalanches (10 certain events, and 9 probable events) were identified since 1959. Historical archives provided evidence only for nine event years since 1987, and three of them were confirmed dendrogeomorphically. Geomorphic effect of recent snow avalanches identified by the spatial distribution of scarred trees in individual years corresponds with the extent of events visible from the orthophotos. We can confirm higher frequency of snow avalanche events since 1980s (17 out of 19 events) and significant increase during the last ten years. The future expected climatic changes associated with the changes in temperature and precipitation regime could significantly influence on the frequency of snow avalanches. Therefore, our results can become the starting line for more extensive dendrogeomorphic survey in the High Tatras Mountains in order to create a catalogue of all natural hazards for the future prediction and modelling of these phenomena in context of environmental changes.

  1. Changes in Mechanics and Composition of Human Talar Cartilage Anlagen During Fetal Development

    PubMed Central

    Mahmoodian, Roza; Leasure, Jeremi; Philip, Phitha; Pleshko, Nancy; Capaldi, Franco; Siegler, Sorin

    2011-01-01

    Objective Fetal cartilage anlage provides a framework for endochondral ossification and organization into articular cartilage. We previously reported differences between mechanical properties of talar cartilage anlagen and adult articular cartilage. However, the underlying development-associated changes remain to be established. Delineation of the normal evolvement of mechanical properties and its associated compositional basis provides insight into the natural mechanisms of cartilage maturation. Our goal was to address this issue. Materials and methods Human fetal cartilage anlagen were harvested from the tali of normal stillborn fetuses from 20 to 36 weeks of gestational age. Data obtained from stress relaxation experiments conducted under confined and unconfined compression configurations were processed to derive the compressive mechanical properties. The compressive mechanical properties were extracted from a linear fit to the equilibrium response in unconfined compression, and by using the nonlinear biphasic theory to fit to the experimental data from the confined compression experiment, both in stress-relaxation. The molecular composition was obtained using FTIR, and spatial maps of tissue contents per dry weight were created using FTIR imaging. Correlative and regression analyses were performed to identify relationships between the mechanical properties and age, compositional properties and age, and mechanical versus compositional parameters. Results All of the compositional quantities and the mechanical properties excluding the Poisson’s ratio changed with maturation. Stiffness increased by a factor of ~2.5 and permeability decreased by 20% over the period studied. Collagen content and degree of collagen integrity increased with age by ~3-fold, while the proteoglycan content decreased by 18%. Significant relations were found between the mechanical and compositional properties. Conclusion The mechanics of fetal talar cartilage is related to its composition

  2. Bone anchors or interference screws? A biomechanical evaluation for autograft ankle stabilization.

    PubMed

    Jeys, Lee; Korrosis, Sotiris; Stewart, Todd; Harris, Nicholas J

    2004-01-01

    Autograft stabilization uses free semitendinosus tendon grafts to anatomically reconstruct the anterior talofibular ligament. Study aims were to evaluate the biomechanical properties of Mitek GII anchors compared with the Arthrex Bio-Tenodesis Screw for free tendon reconstruction of the anterior talofibular ligament. There are no differences in load to failure and percentage specimen elongation at failure between the 2 methods. Controlled laboratory study using porcine models. Sixty porcine tendon constructs were failure tested. Re-creating the pull of the anterior talofibular ligament, loads were applied at 70 degrees to the bones. Thirty-six tendons were fixed to porcine tali and tested using a single pull to failure; 10 were secured with anchors and No. 2 Ethibond, 10 with anchors and FiberWire, 10 with screws and Fiberwire, and 6 with partially gripped screws. Cyclic preloading was conducted on 6 tendons fixed by anchors and on 6 tendons fixed by screws before failure testing. Two groups of 6 components fixed to the fibula were also tested. The talus single-pull anchor group produced a mean load of 114 N and elongation of 37% at failure. The talus single-pull screw group produced a mean load of 227 N and elongation of 22% at failure (P <.05). Cyclic preloading at 65% failure load before failure testing produced increases in load and decreases in elongation at failure. Partially gripped screws produced a load of 133 N and elongation of 30% at failure. The fibula model produced significant increases in load to failure for both. The human anterior talofibular ligament has loads of 139 N at failure with instability occurring at 20% elongation. Interference screw fixation produced significantly greater failure strength and less elongation at failure than bone anchors. The improved biomechanics of interference screws suggests that these may be more suited to in vivo reconstruction of the anterior talofibular ligament than are bone anchors.

  3. Talar morphology, phylogenetic affinities, and locomotor adaptation of a large-bodied amphipithecid primate from the late middle eocene of Myanmar.

    PubMed

    Marivaux, Laurent; Beard, K Christopher; Chaimanee, Yaowalak; Dagosto, Marian; Gebo, Daniel L; Guy, Franck; Marandat, Bernard; Khaing, Kyaw; Kyaw, Aung Aung; Oo, Myo; Sein, Chit; Soe, Aung Naing; Swe, Myat; Jaeger, Jean-Jacques

    2010-10-01

    A well-preserved fossil talus [National Museum of Myanmar Primates (NMMP) 82] of a large-bodied primate is described from the late middle Eocene Pondaung Formation of central Myanmar. The specimen was collected at Thandaung Kyitchaung, a well-known amphipithecid primate-bearing locality near the village of Mogaung. NMMP 82 adds to a meager but growing sample of postcranial remains documenting the large-bodied primates of the Pondaung Formation. This new talus exhibits a suite of features that resemble conditions found in living and fossil haplorhine primates, notably anthropoids. As such, the phylogenetic signal deriving from the morphology of NMMP 82 conflicts with that provided by NMMP 20, a partial skeleton (including a fragmentary calcaneus) of a second large-bodied Pondaung primate showing undoubted adapiform affinities. Analysis subtalar joint compatibility in a hypothetical NMMP 82/NMMP 20 combination (talus/calcaneus) reveals a substantial degree of functional mismatch between these two tarsal bones. The functional incongruence in subtalar joint morphology between NMMP 20 and NMMP 82 is consistent with the seemingly divergent phylogenetic affinities of these specimens, indicating that two higher level taxa of relatively large-bodied primates are documented in the Pondaung Formation. On the basis of its size and morphology, we refer the NMMP 82 talus to the large-bodied amphipithecid Pondaungia. The occurrence of anthropoid-like tali in the Pondaung Formation obviates the need to invoke homoplasy to explain the shared, derived dental characters that are common to amphipithecids and undoubted anthropoids. Functionally, the NMMP 82 talus appears to have pertained to a primate that is engaged in active quadrupedalism in an arboreal environment along broad and subhorizontal branches. The primate taxon represented by NMMP 82 was capable of climbing and leaping, although it was not particularly specialized for either of these activities. © 2010 Wiley-Liss, Inc.

  4. Cross sections of proton-induced nuclear reactions on bismuth and lead up to 100 MeV

    NASA Astrophysics Data System (ADS)

    Mokhtari Oranj, L.; Jung, N. S.; Bakhtiari, M.; Lee, A.; Lee, H. S.

    2017-04-01

    Production cross sections of 209Bi(p , x n )207,206,205,204,203Po, 209Bi(p , pxn) 207,206,205,204,203,202Bi, and natPb(p , x n ) 206,205,204,203,202,201Bi reactions were measured to fill the gap in the excitation functions up to 100 MeV as well as to figure out the effects of different nuclear properties on proton-induced reactions including heavy nuclei. The targets were arranged in two different stacks consisting of Bi, Pb, Al, Au foils and Pb plates. The proton beam intensity was determined by the activation analysis method using 27Al(p ,3 p n )24Na, 197Au(p ,p n )196Au, and 197Au(p , p 3 n )194Au monitor reactions in parallel as well as the Gafchromic film dosimetry method. The activities of produced radionuclei in the foils were measured by the HPGe spectroscopy system. Over 40 new cross sections were measured in the investigated energy range. A satisfactory agreement was observed between the present experimental data and the previously published data. Excitation functions of mentioned reactions were calculated by using the theoretical model based on the latest version of the TALYS code and compared to the new data as well as with other data in the literature. Additionally, the effects of various combinations of the nuclear input parameters of different level density models, optical model potentials, and γ-ray strength functions were considered. It was concluded that if certain level density models are used, the calculated cross sections could be comparable to the measured data. Furthermore, the effects of optical model potential and γ-ray strength functions were considerably lower than that of nuclear level densities.

  5. Arthrofibrosis involving the middle facet of the talocalcaneal joint in children and adolescents.

    PubMed

    El Rassi, George; Riddle, Eric C; Kumar, S Jay

    2005-10-01

    Pain over the anterolateral aspect of the ankle in a patient with a history of repeated ankle sprains and with restricted subtalar movement may be associated with a tarsal coalition. Nineteen patients presented with such a history, but conventional imaging did not reveal a cartilaginous or osseous coalition. Since symptoms persisted despite nonoperative treatment, the middle facet was explored surgically. The purpose of this study was to discuss the operative findings and to report the results of treatment. Nineteen patients (twenty-three feet) with pain over the anterolateral aspect of the ankle or a history of repeated ankle sprains had restricted subtalar joint motion and inconclusive findings on diagnostic imaging, except for bone-scanning. Their ages ranged from 9.1 to 18.5 years. The middle facet of the subtalar joint was explored surgically through a 3 to 4-cm-long incision centered over the sustentaculum tali. The results at a mean of 5.8 years were classified as good, fair, or poor on the basis of pain, talocalcaneal joint motion, and shoe wear. Routine radiographs, computed tomography, and magnetic resonance imaging revealed no major abnormality, whereas technetium-99m bone scintigraphy consistently showed slightly increased isotope uptake in the middle facet. Surgical removal of a hypervascular and thickened capsule and synovium in the area of the middle facet of the subtalar joint decreased pain and improved subtalar motion. The final result was good in seventeen patients (twenty feet) and fair in two patients (three feet). There were no poor results. A diagnosis of inflammatory arthrofibrosis should be considered when a patient with a painful rigid flatfoot has normal findings on radiographs and hematological studies but increased isotope uptake in the middle facet of the talocalcaneal joint on bone scintigraphy. Excision of the hypervascular capsule and synovium from this area can result in resolution of the symptoms. Therapeutic Level IV.

  6. Subterranean production of neutrons, 39Ar and 21Ne: Rates and uncertainties

    NASA Astrophysics Data System (ADS)

    Šrámek, Ondřej; Stevens, Lauren; McDonough, William F.; Mukhopadhyay, Sujoy; Peterson, R. J.

    2017-01-01

    Accurate understanding of the subsurface production rate of the radionuclide 39Ar is necessary for argon dating techniques and noble gas geochemistry of the shallow and the deep Earth, and is also of interest to the WIMP dark matter experimental particle physics community. Our new calculations of subsurface production of neutrons, 21Ne , and 39Ar take advantage of the state-of-the-art reliable tools of nuclear physics to obtain reaction cross sections and spectra (TALYS) and to evaluate neutron propagation in rock (MCNP6). We discuss our method and results in relation to previous studies and show the relative importance of various neutron, 21Ne , and 39Ar nucleogenic production channels. Uncertainty in nuclear reaction cross sections, which is the major contributor to overall calculation uncertainty, is estimated from variability in existing experimental and library data. Depending on selected rock composition, on the order of 107-1010 α particles are produced in one kilogram of rock per year (order of 1-103 kg-1 s-1); the number of produced neutrons is lower by ∼ 6 orders of magnitude, 21Ne production rate drops by an additional factor of 15-20, and another one order of magnitude or more is dropped in production of 39Ar. Our calculation yields a nucleogenic 21Ne /4He production ratio of (4.6 ± 0.6) ×10-8 in Continental Crust and (4.2 ± 0.5) ×10-8 in Oceanic Crust and Depleted Mantle. Calculated 39Ar production rates span a great range from 29 ± 9 atoms kg-rock-1 yr-1 in the K-Th-U-enriched Upper Continental Crust to (2.6 ± 0.8) × 10-4 atoms kg-rock-1 yr-1 in Depleted Upper Mantle. Nucleogenic 39Ar production exceeds the cosmogenic production below ∼700 m depth and thus, affects radiometric ages of groundwater. The 39Ar chronometer, which fills in a gap between 3H and 14C , is particularly important given the need to tap deep reservoirs of ancient drinking water.

  7. The protective effect of niacinamide on CHO AA8 cell line against ultraviolet radiation in the context of main cytoskeletal proteins.

    PubMed

    Izdebska, Magdalena; Hałas-Wiśniewska, Marta; Adamczyk, Iwona; Lewandowska, Ismena; Kwiatkowska, Iga; Gagat, Maciej; Grzanka, Alina

    2018-03-13

    Niacinamide is a stable and water-soluble form of vitamin B3, a valuable and versatile cosmetic ingredient, which is well absorbed and tolerated by the skin. A large body of literature has reported on the antioxidant and cell repair properties of niacinamide. Therefore, it has been shown to be useful in the protection of the skin against ultraviolet B (UVB) radiation and free radicals. Despite numerous hypotheses on the mechanism of vitamin B3, its protective effects have not yet been fully elucidated. The aim of the study was to determine the protective effects of niacinamide on CHO AA8 cell line against UVB radiation. We assessed the following factors: cell death, cell cycle phase distributions, reorganization of main cytoskeletal proteins, such as F-actin, vimentin and β-tubulin, and also alterations at the ultrastructural level. The material used for our research was Chinese hamster ovary cell line (CHO AA8). We used 4 research groups: 1) control cells; 2) cells treated with niacinamide; 3) cells exposed to UV radiation; and 4) cells co-incubated with niacinamide and next exposed to ultraviolet. The cell death and cell cycle were evaluated by a Tali® based-image cytometer. A fluorescence microscope was used to assess the reorganization of cytoskeletal proteins, whereas a transmission electron microscope enabled the evaluation of the alterations at the ultrastructural level of cells. We showed that UV-induced apoptosis and cell cycle distributions during treatment with niacinamide resulted in a non-statistical significance in cell survival and no significant changes in the morphology and cytoskeleton in comparison to the control group. In turn, a combination of both factors led to an increase in the population of live cells and a decreased level of apoptotic cells in comparison to UV-exposed cells. Our results confirmed the harmful effects of UV radiation on CHO AA8 cell line. Furthermore, niacinamide can protect cells against these factors, and the mechanism

  8. Safe Zone of Posterior Screw Insertion for Talar Neck Fractures on 3-Dimensional Reconstruction Model.

    PubMed

    Wu, Jian-Qun; Ma, Sheng-Hui; Liu, Song; Qin, Cheng-He; Jin, Dan; Yu, Bin

    2017-02-01

    To investigate the optimal posterior screw placement and the geometry of safe zones for screw insertion in the talar neck. Computed tomography data for 15 normal feet were imported into Mimics 10.01 software for 3-dimensional reconstruction; 4.0-mm-diameter screws were simulated from the lateral tubercle of the posterior process of the talus to the talar head. The range of screw paths trajectories and screw lengths at nine locations that did not breach the cortex of the talus were evaluated. In addition, the farthest (point a) and nearest point (point b) of the safe zone to the subtalar joint at each location, the anteversion angle (angle A), which is parallel to the sagittal plane, and the horizontal angle (angle B), which is perpendicular to the sagittal plane, were measured. The safe zone was mainly between the 30% location and the 60% location; the width of each safe zone was 13.6° ± 1.4°; the maximum height of each safe zone was 7.8° ± 1.2°. The height of the safe zone was lowest at the 30% location (4.5°) and highest at the 50% location (7.3°). The mixed safe zone of all tali was between the 50% location and the 60% location. When a screw was inserted at point a, the safe entry distance (screw length) ranged from 48.8 to 49.5 mm, and when inserted to point b, the distance ranged from 48.2 to 48.9 mm. And inserting a 48.7 mm screw, 5.6° laterally and 7.4° superiorly, from the lateral tubercle of the posterior process of the talus towards the talar head is safest. The safe zone of posterior screw fixation have been defined applying to most talus, assuming the fractures are well reduced, this may strengthen the stability, shorten the operation time and reduce the incidence of surgical complications. © 2017 Chinese Orthopaedic Association and John Wiley & Sons Australia, Ltd.

  9. On microscopic theory of radiative nuclear reaction characteristics

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kamerdzhiev, S. P.; Achakovskiy, O. I., E-mail: oachakovskiy@ippe.ru; Avdeenkov, A. V.

    2016-07-15

    A survey of some results in the modern microscopic theory of properties of nuclear reactions with gamma rays is given. First of all, we discuss the impact of Phonon Coupling (PC) on the Photon Strength Function (PSF) because it represents the most natural physical source of additional strength found for Sn isotopes in recent experiments that could not be explained within the standard HFB + QRPA approach. The self-consistent version of the Extended Theory of Finite Fermi Systems in the Quasiparticle Time Blocking Approximation is applied. It uses the HFB mean field and includes both the QRPA and PC effectsmore » on the basis of the SLy4 Skyrme force. With our microscopic E1 PSFs, the following properties have been calculated for many stable and unstable even–even semi-magic Sn and Ni isotopes as well as for double-magic {sup 132}Sn and {sup 208}Pb using the reaction codes EMPIRE and TALYS with several Nuclear Level Density (NLD) models: (1) the neutron capture cross sections; (2) the corresponding neutron capture gamma spectra; (3) the average radiative widths of neutron resonances. In all the properties considered, the PC contribution turned out to be significant, as compared with the standard QRPA one, and necessary to explain the available experimental data. The results with the phenomenological so-called generalized superfluid NLD model turned out to be worse, on the whole, than those obtained with the microscopic HFB + combinatorial NLD model. The very topical question about the M1 resonance contribution to PSFs is also discussed.Finally, we also discuss the modern microscopic NLD models based on the self-consistent HFB method and show their relevance to explain the experimental data as compared with the phenomenological models. The use of these self-consistent microscopic approaches is of particular relevance for nuclear astrophysics, but also for the study of double-magic nuclei.« less

  10. A Report on the Achievements of Subgroup 19 on Activation Cross Sections of the WPEC, OECD-NEA

    NASA Astrophysics Data System (ADS)

    Plompen, A. J. M.; Smith, D. L.; Semkova, V. M.

    2005-05-01

    Subgroup 19 on Activation Cross Sections of the Working Party on Evaluation Cooperation of the OECD-NEA has recently concluded its activities. The goal of the subgroup was to generate a large set of new measured activation cross sections relevant to nuclear applications and make these data available to the nuclear science community. In addition, modeling efforts and sensitivity studies were undertaken to evaluate the use of measured data and model calculations for the prediction of unknown cross sections. The latter addresses the potential of model calculations to satisfy issues on the High Priority Request List when no measured data are available. In the course of the activities of the subgroup over ninety reaction channels were studied experimentally. All except the most recent of these data have been compiled into EXFOR format by members of the subgroup and submitted to OECD- NEA. As a result most of these data can now be retrieved online from the data centers. A systematic comparison was made with the new evaluated data files JEF3.0/EAF2003, JENDL3.3, and ENDF/B-VI.8 and with the current status of the global parameter systematics of the model code TALYS-0.57. In addition, a considerable number of locally optimized parameter sets were developed. Both the global and local approaches emphasize the use of consistent physics modelling for all important reaction channels and nuclides involved in the decay. Comparison of the two approaches allows assessment of the effort required when model estimates to a certain accuracy must be made. Parameter sensitivity studies were undertaken to further assess the accuracy requirements on model parameters if target uncertainties for the cross sections have been specified. The value of this approach has demonstrated itself and indicates the need for model codes that fit all available experimental data in order to connect the data covariance with the covariance of the model predictions. The work of the subgroup was a joint effort

  11. Elastic and Inelastic Scattering of Neutrons from Neon and Argon: Impact on Neutrinoless Double-Beta Decay and Dark Matter Experimental Programs

    NASA Astrophysics Data System (ADS)

    MacMullin, Sean Patrick

    In underground physics experiments, such as neutrinoless double-beta decay and dark matter searches, fast neutrons may be the dominant and potentially irreducible source of background. Experimental data for the elastic and inelastic scattering cross sections of neutrons from argon and neon, which are target and shielding materials of interest to the dark matter and neutrinoless double-beta decay communities, were previously unavailable. Unmeasured neutron scattering cross sections are often accounted for incorrectly in Monte-Carlo simulations. Elastic scattering cross sections were measured at the Triangle Universities Nuclear Laboratory (TUNL) using the neutron time-of-flight technique. Angular distributions for neon were measured at 5.0 and 8.0 MeV. One full angular distribution was measured for argon at 6.0 MeV. The cross-section data were compared to calculations using a global optical model. Data were also fit using the spherical optical model. These model fits were used to predict the elastic scattering cross section at unmeasured energies and also provide a benchmark where the global optical models are not well constrained. Partial gamma-ray production cross sections for (n,xngamma ) reactions in natural argon and neon were measured using the broad spectrum neutron beam at the Los Alamos Neutron Science Center (LANSCE). Neutron energies were determined using time of flight and resulting gamma rays from neutron-induced reactions were detected using the GErmanium Array for Neutron Induced Excitations (GEANIE). Partial gamma-ray production cross sections for six transitions in 40Ar, two transitions in 39Ar and the first excited state transitions is 20Ne and 22Ne were measured from threshold to a neutron energy where the gamma-ray yield dropped below the detection sensitivity. Measured (n,xngamma) cross sections were compared with calculations using the TALYS and CoH3 nuclear reaction codes. These new measurements will help to identify potential backgrounds in

  12. 3d-modelling workflows for trans-nationally shared geological models - first approaches from the project GeoMol

    NASA Astrophysics Data System (ADS)

    Rupf, Isabel

    2013-04-01

    framework model are interpreted seismic lines, 3d-models can be generated either in time or in depth domain. Some partners will build their 3d-model in time domain and convert it after finishing to depth. Other participants will transform seismic information first and will model directly in depth domain. To ensure comparability between the different parts transnational velocity models for time-depth conversion are required at an early stage of the project. The exchange of model geometries, topology, and geo-scientific content will be achieved applying an appropriate cyberinfrastructure called GST. It provides functionalities to ensure semantic and technical interoperability. Within the project GeoMol a web server for the dissemination of 3d geological models will be implemented including an administrative interface for the role-based access, real-time transformation of country-specific coordinate systems and a web visualisation features. The project GeoMol is co-funded by the Alpine Space Program as part of the European Territorial Cooperation 2007-2013. The project integrates partners from Austria, France, Germany, Italy, Slovenia and Switzerland and runs from September 2012 to June 2015. Further information on www.geomol.eu. The GeoMol 3D-modelling team: Roland Baumberger (swisstopo), Magdalena Bottig (GBA), Alessandro Cagnoni (RLB), Laure Capar (BRGM), Renaud Couëffé (BRGM), Chiara D'Ambrogi (ISPRA), Chrystel Dezayes (BRGM), Gerold Diepolder (LfU BY), Charlotte Fehn (LGRB), Sunseare Gabalda (BRGM), Gregor Götzl (GBA), Andrej Lapanje (GeoZS), Fabio Carlo Molinari (RER-SGSS), Edgar Nitsch (LGRB), Robert Pamer (LfU BY), Sebastian Pfleiderer (GBA), Marco Pantaloni (ISPRA), Uta Schulz (LfU BY), Günter Sokol (LGRB), Gunther Wirsing (LGRB), Heiko Zumsprekel (LGRB)

  13. RIPL - Reference Input Parameter Library for Calculation of Nuclear Reactions and Nuclear Data Evaluations

    NASA Astrophysics Data System (ADS)

    Capote, R.; Herman, M.; Obložinský, P.; Young, P. G.; Goriely, S.; Belgya, T.; Ignatyuk, A. V.; Koning, A. J.; Hilaire, S.; Plujko, V. A.; Avrigeanu, M.; Bersillon, O.; Chadwick, M. B.; Fukahori, T.; Ge, Zhigang; Han, Yinlu; Kailas, S.; Kopecky, J.; Maslov, V. M.; Reffo, G.; Sin, M.; Soukhovitskii, E. Sh.; Talou, P.

    2009-12-01

    We describe the physics and data included in the Reference Input Parameter Library, which is devoted to input parameters needed in calculations of nuclear reactions and nuclear data evaluations. Advanced modelling codes require substantial numerical input, therefore the International Atomic Energy Agency (IAEA) has worked extensively since 1993 on a library of validated nuclear-model input parameters, referred to as the Reference Input Parameter Library (RIPL). A final RIPL coordinated research project (RIPL-3) was brought to a successful conclusion in December 2008, after 15 years of challenging work carried out through three consecutive IAEA projects. The RIPL-3 library was released in January 2009, and is available on the Web through http://www-nds.iaea.org/RIPL-3/. This work and the resulting database are extremely important to theoreticians involved in the development and use of nuclear reaction modelling (ALICE, EMPIRE, GNASH, UNF, TALYS) both for theoretical research and nuclear data evaluations. The numerical data and computer codes included in RIPL-3 are arranged in seven segments: MASSES contains ground-state properties of nuclei for about 9000 nuclei, including three theoretical predictions of masses and the evaluated experimental masses of Audi et al. (2003). DISCRETE LEVELS contains 117 datasets (one for each element) with all known level schemes, electromagnetic and γ-ray decay probabilities available from ENSDF in October 2007. NEUTRON RESONANCES contains average resonance parameters prepared on the basis of the evaluations performed by Ignatyuk and Mughabghab. OPTICAL MODEL contains 495 sets of phenomenological optical model parameters defined in a wide energy range. When there are insufficient experimental data, the evaluator has to resort to either global parameterizations or microscopic approaches. Radial density distributions to be used as input for microscopic calculations are stored in the MASSES segment. LEVEL DENSITIES contains

  14. RIPL - Reference Input Parameter Library for Calculation of Nuclear Reactions and Nuclear Data Evaluations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Capote, R.; Herman, M.; Oblozinsky, P.

    We describe the physics and data included in the Reference Input Parameter Library, which is devoted to input parameters needed in calculations of nuclear reactions and nuclear data evaluations. Advanced modelling codes require substantial numerical input, therefore the International Atomic Energy Agency (IAEA) has worked extensively since 1993 on a library of validated nuclear-model input parameters, referred to as the Reference Input Parameter Library (RIPL). A final RIPL coordinated research project (RIPL-3) was brought to a successful conclusion in December 2008, after 15 years of challenging work carried out through three consecutive IAEA projects. The RIPL-3 library was released inmore » January 2009, and is available on the Web through (http://www-nds.iaea.org/RIPL-3/). This work and the resulting database are extremely important to theoreticians involved in the development and use of nuclear reaction modelling (ALICE, EMPIRE, GNASH, UNF, TALYS) both for theoretical research and nuclear data evaluations. The numerical data and computer codes included in RIPL-3 are arranged in seven segments: MASSES contains ground-state properties of nuclei for about 9000 nuclei, including three theoretical predictions of masses and the evaluated experimental masses of Audi et al. (2003). DISCRETE LEVELS contains 117 datasets (one for each element) with all known level schemes, electromagnetic and {gamma}-ray decay probabilities available from ENSDF in October 2007. NEUTRON RESONANCES contains average resonance parameters prepared on the basis of the evaluations performed by Ignatyuk and Mughabghab. OPTICAL MODEL contains 495 sets of phenomenological optical model parameters defined in a wide energy range. When there are insufficient experimental data, the evaluator has to resort to either global parameterizations or microscopic approaches. Radial density distributions to be used as input for microscopic calculations are stored in the MASSES segment. LEVEL DENSITIES

  15. RIPL-Reference Input Parameter Library for Calculation of Nuclear Reactions and Nuclear Data Evaluations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Capote, R.; Herman, M.; Capote,R.

    We describe the physics and data included in the Reference Input Parameter Library, which is devoted to input parameters needed in calculations of nuclear reactions and nuclear data evaluations. Advanced modelling codes require substantial numerical input, therefore the International Atomic Energy Agency (IAEA) has worked extensively since 1993 on a library of validated nuclear-model input parameters, referred to as the Reference Input Parameter Library (RIPL). A final RIPL coordinated research project (RIPL-3) was brought to a successful conclusion in December 2008, after 15 years of challenging work carried out through three consecutive IAEA projects. The RIPL-3 library was released inmore » January 2009, and is available on the Web through http://www-nds.iaea.org/RIPL-3/. This work and the resulting database are extremely important to theoreticians involved in the development and use of nuclear reaction modelling (ALICE, EMPIRE, GNASH, UNF, TALYS) both for theoretical research and nuclear data evaluations. The numerical data and computer codes included in RIPL-3 are arranged in seven segments: MASSES contains ground-state properties of nuclei for about 9000 nuclei, including three theoretical predictions of masses and the evaluated experimental masses of Audi et al. (2003). DISCRETE LEVELS contains 117 datasets (one for each element) with all known level schemes, electromagnetic and {gamma}-ray decay probabilities available from ENSDF in October 2007. NEUTRON RESONANCES contains average resonance parameters prepared on the basis of the evaluations performed by Ignatyuk and Mughabghab. OPTICAL MODEL contains 495 sets of phenomenological optical model parameters defined in a wide energy range. When there are insufficient experimental data, the evaluator has to resort to either global parameterizations or microscopic approaches. Radial density distributions to be used as input for microscopic calculations are stored in the MASSES segment. LEVEL DENSITIES contains

  16. Aspetti deontologici e giuridici della Responsabilità professionale del chirurgo in Italia. Evoluzione storica a partire dal '900.

    PubMed

    Picardi, Nicola

    2018-01-01

    È pleonastico ricordare che ogni individuo raziocinante delle essere responsabile delle sue azioni: deve agire con la coscienza degli scopi che si propone evitando possibili conseguenze negative dei suoi atti. In ambito medico questo tipo di responsabilità è codificata con le norme della "deontologia". Per secoli l'arte terapeutica è stata praticata da individui dotati di una particolare vocazione ed una particolare cultura acquisita da Maestri dell'arte ancor prima che dalla propria esperienza, con nozioni di erboristeria e di elementari conoscenze anatomiche e di fisiologia, circondati da un'aura sacerdotale e da un rispetto derivante dal timore e dall'ammirazione per il coraggio e auspicabilmente dai successi, e facendo riferimento nell'occidente mediterraneo alle regole operative fissate nel Giuramento di Ippocrate, di significato tra il sacro ed il deontologico. Lo sviluppo delle tecniche anestesiologiche a partire dalla seconda metà dell'800 ha determinato l'ampliamento delle iniziative chirurgiche di tipo elettivo, a fianco con gli storici interventi in emergenza per la cura di lesioni traumatiche, ancor prima delle acquisizioni riguardanti le infezioni. Con l'espansione del campo di azione della chirurgia, le possibili complicanze ed i possibili insuccessi hanno fatto da contrappeso ai sentimenti di rispetto e di fiducia nei confronti dei chirurghi, giungendo a far assimilare in tali casi la loro opera quale causa all'origine di danni, provocati rientrando quindi nella categoria dei reati sottoposti alla Legge penale. Così, al termine deontologico di "responsabilità" valido per ogni iniziativa ed ogni professione, per i medici è venuto ad associarsi la qualifica di "professionale", con un significato di presunta colpevolezza. Da una parte le regole deontologiche si sono ampliate, ed hanno coinvolto direttamente il paziente nella fase decisionale delle terapie chirurgiche, formalizzate programmaticamente in moderni codici deontologici ed

  17. Radiological Protection and Nuclear Engineering Studies in Multi-MW Target Systems

    NASA Astrophysics Data System (ADS)

    Luis, Raul Fernandes

    goal of this work was to perform an optimisation study for the ISOLDE neutron converter and Vssion target system. The target system was simulated using FLUKA and the cross section codes TALYS and ABRABLA, with the objective of maximising the performance of the system for the production of pure beams of neutron-rich isotopes, suppressing the contaminations by undesired neutron-deficient isobars. Two alternative target systems were proposed in the optimisation studies; the simplest of the two, with some modiVcations, was built as a prototype and tested at ISOLDE. The experimental results clearly show that it is possible, with simple changes in the layouts of the target systems, to produce purer beams of neutron-rich isotopes around the doubly magic nuclei 78Ni and 132Sn. A study of Radiological Protection was also performed, comparing the performances of the prototype target system and the standard ISOLDE target system. None

  18. CHAIRMEN'S PREFACE AND EDITORS' NOTE: Unification of Fundamental Interactions

    NASA Astrophysics Data System (ADS)

    Brink, Lars; Nilsson, Jan S.; Salomonson, Per; Skagerstam, Bo-Sture

    1987-01-01

    Chairmen's PrefaceIn 1984 we obtained a grant from the Nobel Foundation to organize a Nobel Symposium on "Unification of the Fundamental Interactions". In our proposal which we submitted in the fall of 1983 we stated that we wanted to cover the various attempts to unification such as GUT'S, supergravity, Kaluza-Klein theories and superstrings. What has happened in particle physics since then is already history. With the realization that certain superstring theories could be anomaly free, it became clear that these models could encompass earlier attempts to unification as well as solving the fundamental problem of quantum gravity. The excitement that some of us had felt for some time now spread through most of the particle physics community and this excitement certainly was evident during the Symposium. With the international advisory committee we originally chose a list of around 30 invitees which could best represent the various subjects listed above. When it came to the final planning of the programme essentially all talks dealt with superstrings! We were very fortunate that almost all of the invitees managed to come to the Symposium. From the western world only three were unable to participate, André Neveu, Steven Weinberg and Bruno Zumino. We certainly missed them during the meeting. We were particularly happy that Stephen Hawking managed to take part actively. Our real problem was to get participants from the Soviet Union. Out of eight invitations only one came through. We were very happy to have Renata Kallosh, who really did her utmost to enlighten us about not only her own work but also about recent progress in the USSR, However, we were very sorry that in spite of all our letters, telegrammes and endless attempts to get telephone calls through and despite the good relations between the Swedish and Soviet Academies of Sciences we had to miss Ludwig Faddeev, Valodja Gribov, Andrej Linde, Victor Ogievetsky, Sasha Polyakov, Misha Shifman and Arkadij

  19. Contribution of seismic processing to put up the scaffolding for the 3-dimensional study of deep sedimentary basins: the fundaments of trans-national 3D modelling in the project GeoMol

    NASA Astrophysics Data System (ADS)

    Capar, Laure

    2013-04-01

    European Territorial Cooperation 2007-2013. The project integrates partners from Austria, France, Germany, Italy, Slovenia and Switzerland and runs from September 2012 to June 2015. Further information on www.geomol.eu The GeoMol seismic interpretation team: Roland Baumberger (swisstopo), Agnès BRENOT (BRGM), Alessandro CAGNONI (RLB), Renaud COUËFFE (BRGM), Gabriel COURRIOUX (BRGM), Chiara D'Ambrogi (ISPRA), Chrystel Dezayes (BRGM), Charlotte Fehn (LGRB), Sunseare GABALDA (BRGM), Gregor Götzl (GBA), Andrej Lapanje (GeoZS), Stéphane MARC (BRGM), Alberto MARTINI (RER-SGSS), Fabio Carlo Molinari (RER-SGSS), Edgar Nitsch (LGRB), Robert Pamer (LfU BY), Marco PANTALONI (ISPRA), Sebastian Pfleiderer (GBA), Andrea PICCIN (RLB), (Nils Oesterling (swisstopo), Isabel Rupf (LGRB), Uta Schulz (LfU BY), Yves SIMEON (BRGM), Günter SÖKOL (LGRB), Heiko Zumsprekel (LGRB)

  20. Il ruolo svolto dall’attività lavorativa sull’ipertensione arteriosa

    PubMed Central

    Barbini, N.; Gorini, G.; Ferrucci, L.; Biggeri, A.

    2009-01-01

    RIASSUNTO Introduzione I parametri di pressione arteriosa, sistolica (PAS) o diastolica (PAD) hanno costituito I’oggetto di numerosi studi, alcuni dei quali stabiliscono un’associazione tra I’aumnto di tali parametri e la mortalità, in particolare alle età medie. I fattori di rischio di ipertensione più frequentemente studiati sono il consumo di alcol, il fumo e I’origine etnica in riferimento sia alle differenze genetiche che nella condotta alimentare, mentre i fattori di origine professionale sono stati presi in considerazione più raramente e in maniera poco approfondita, inoltre sono state riferite notevoli differenze nelle pressioni arteriose medie di individui che svolgono professioni diverse. Sembra infatti che i “colletti blu” siano più a rischio dei “colletti bianchi”. Obiettivi Il nostro scopo è valutare se determinati rischi o vincoli connessi con l’attività professionale o determinati stili di vita rappresentano un fattore di rischio per l’ipertensione arteriosa in considerazioni dell’aumentare dell’età. Elementi specifici che rendano conto di questa relazione non sono stati ancora completamente chiariti e soprattutto i dati sulla popolazione italiana sono molto limitati. Metodi La metodologia di ricerca utilizzata è stata quella dell’indagine francese ESTEV (Derriennic, Touranchet, Volkoff) - VISAT (Marquie, Janson), studio epidemiologico longitudinale su oltre 23000 lavoratori attivata in Francia nel 1990 al fine di indagare gli effetti a lungo termine delle condizioni di lavoro, riferite all’intera vita professionale, sia sull’invecchiamento sia sulla salute dei lavoratori. Analoga indagine è stata avviata in Italia, nel 2000, in 6 Regioni, prendendo in esame i lavoratori dipendenti di diversi settori produttivi appartenenti a 5 coorti di età: da 32 a 52 anni con intervallo di 5 anni. Le rilevazioni sono state effettuate dai medici del lavoro di azienda attraverso 3 questionari: 1. sulle condizioni

  1. 3rd International Conference on Turbulent Mixing and Beyond

    NASA Astrophysics Data System (ADS)

    Abarzhi, Snezhana I.; Gauthier, Serge; Keane, Christopher J.; Niemela, Joseph J.

    2013-07-01

    (University of South Florida, USA) • Serge Gauthier (Commissariat à l'Energie Atomique, France) • Joseph J Niemela (International Centre for Theoretical Physics, Italy) • Katsunobu Nishihara (Institute for Laser Engineering, Osaka, Japan) • Katepalli R Sreenivasan (New York University, USA) We greatly acknowledge the effort and dedication of the members of the Committee for Best Poster Award: • Serge Gauthier (Commissariat à l'Energie Atomique, France) • Katsunobu Nishihara (Institute for Laser Engineering, Osaka, Japan) • Annick Pouquet (National Center for Atmospheric Research, USA) • Walter Gekelman (University of California, Los Angeles, USA) • Graeme Watt (Institute of Physics, UK) We greatly appreciate the work of conference web-master Daniil V Ilyin (University of Chicago, USA). We thank for technical support: • Bhanesh Akula (Texas A & M University, USA) • Ahmad Qamar (University of Chicago, USA) We warmly acknowledge the logistics assistance of the offices and officers of the Abdus Salam International Centre for Theoretical Physics: • Conference Support Office, and Ms Katrina Danforth and Ms Daniela Giombi • Financial Office, and Mr Andrej Michelcich and Ms Alessandra Ricci • Visa Office, and Mr Erich Jost and Mr Adriano Maggio • Housing Office, and Ms Tiziana Bottazzi and Ms Dora Photiou • Publications Office, and Mr Guido Comar and Mr Raffaele Corona • Computer Office, and Dr Johannes Grassberger • Science Dissemination Unit, and Dr Enrique Canessa, Dr. Carlo Fonda and Dr Marco Zennaro We gratefully appreciate the support of the members of the Programme Coordination Board: • Snezhana I Abarzhi (University of Chicago, USA) • Malcolm J Andrews (Los Alamos National Laboratory, USA) • Sergei I Anisimov (Landau Institute for Theoretical Physics, Russia) • Hiroshi Azechi (Institute for Laser Engineering, Osaka, Japan) • Vladimir E Fortov (Institute for High Energy Density, Russia) • Serge Gauthier (Commissariat à l