Effects of growth hormone treatment on growth in children with juvenile idiopathic arthritis.

PubMed

Simon, D; Bechtold, S

2009-11-01

Several therapeutic trials have been conducted over the past decade to evaluate the role of exogenous growth hormone (GH) as a means of correcting the growth deficiency seen in children with juvenile idiopathic arthritis (JIA). Early studies showed the benefit of GH treatment with respect to final height in patients with JIA. Of 13 patients receiving GH, 84% (11 patients) achieved a final height within their target range compared with only 22% (4 of 18 patients) of untreated patients. There are, however, factors that may limit the statural gains achieved with GH therapy including severe inflammation, severe statural deficiency at GH therapy initiation, long disease duration and delayed puberty. Data on the efficacy of GH replacement therapy in children with JIA and factors that influence the statural growth response will be reviewed. Results from therapeutic trials show that treatment with GH can decrease the statural deficit that occurs during the active phase of JIA, producing an adult height that is close to the genetically determined target height. Copyright 2009 S. Karger AG, Basel.

Reference curve for the first-year growth response to growth hormone treatment in prepubertal children with idiopathic growth hormone deficiency: validation of the KIGS first-year growth response curve using the Belgian Register for the Study of Growth and Puberty Problems.

PubMed

Straetemans, Saartje; Roelants, Mathieu; Thomas, Muriel; Rooman, Raoul; De Schepper, Jean

2014-01-01

Comparing observed and expected growth after first-year growth hormone (GH) therapy is useful for identifying a poor growth response to GH. To generate a first-year, age-specific growth response reference curve for prepubertal Belgian children with idiopathic growth hormone deficiency (iGHD) treated with a standard weight-adjusted GH dose and to compare this national reference with the response references derived from KIGS. First-year height data of 357 prepubertal children (240 males) with iGHD were analyzed. Smooth reference curves of first-year height velocity (HV) in relation to age were created. Differences with the KIGS targets were evaluated after z-score transformation. The observed first-year HVs were log-normal distributed by age and decreased significantly with age (p<0.001). No GH dose or gender effect was observed (p=0.5). Distance to target height, severity of GHD and occurrence of multiple pituitary hormone deficiencies had a positive effect (p<0.01) on the calculated HV SDS. When applying the KIGS targets for severe iGHD, mean HV SDS was close to zero (-0.09±0.84). The developed age-specific growth response curves enable rapid identification of poor response to first-year GH treatment in prepubertal iGHD children. Our results validate the published growth targets derived from the KIGS database. © 2014 S. Karger AG, Basel.

Amendment to "Analytical Solution for the Convectively-Mixed Atmospheric Boundary Layer": Inclusion of Subsidence

NASA Astrophysics Data System (ADS)

Ouwersloot, H. G.; de Arellano, J. Vilà-Guerau

2013-09-01

In Ouwersloot and Vilà-Guerau de Arellano (Boundary-Layer Meteorol. doi: 10.1007/s10546-013-9816-z , 2013, this issue), the analytical solutions for the boundary-layer height and scalar evolutions are derived for the convective boundary layer, based on the prognostic equations of mixed-layer slab models without taking subsidence into account. Here, we include and quantify the added effect of subsidence if the subsidence velocity scales linearly with height throughout the atmosphere. This enables analytical analyses for a wider range of observational cases. As a demonstration, the sensitivity of the boundary-layer height and the potential temperature jump to subsidence and the free tropospheric stability is graphically presented. The new relations show the importance of the temporal distribution of the surface buoyancy flux in determining the evolution if there is subsidence.

Reported shoes size during GH therapy: is foot overgrowth a myth or reality?

PubMed

Lago, Débora C F; Coutinho, Cláudia A; Kochi, Cristiane; Longui, Carlos A

2015-10-01

To describe population reference values for shoes size, and to identify possible disproportional foot growth during GH therapy. Construction of percentile chart based on 3,651 controls (male: 1,838; female: 1,813). The GH treated group included 13 children with idiopathic short stature (ISS) and 50 children with normal height, but with height prediction below their target height; male: 26 and female: 37 mean ± SD age 13.3 ± 1.9 and 12.9 ± 1.5 years, respectively. GH (0.05 mg/kg/day) was used for 3.2 ± 1.6 years, ranging from 1.0-10.3 years. Height expressed as SDS, target height (TH) SDS, self-reported shoes size and target shoes size (TSS) SDS were recorded. Reference values were established showed as a foot SDS calculator available online at www.clinicalcaselearning.com/v2. Definitive shoes size was attained in controls at mean age of 13y in girls and 14y in boys (average values 37 and 40, respectively). In the study group, shoes size was -0.15 ± 0.9 and -0.02 ± 1.3 SDS, with target feet of 0.08 ± 0.8 and -0.27 ± 0.7 SDS in males and females, respectively. There was a significant positive correlation between shoes size and familial TSS, between shoes size and height and between TSS and TH. There was no correlation between duration of GH treatment and shoes size. Our data suggest that during long-term treatment with GH, patients maintain proportional growth in shoes size and height, and the expected correlation with the familial target. We conclude that there is no excessive increase in the size of foot as estimated by the size of shoes in individuals under long term GH therapy.

[LOCATION CHANGE OF ROTATION CENTER AFTER SINGLE SEGMENTAL CERVICAL DISC REPLACEMENT WITH ProDisc-C].

PubMed

Lou, Jigang; Liu, Hao; Rong, Xin; Gong, Quan; Song, Yueming; Li, Tao

2015-01-01

To evaluate the effectiveness of the single segmental cervical disc replacement with ProDisc-C, and to explore the location change of the flexion/extension center of rotation (COR) of the target level as well as its clinical significance. Between June 2010 and February 2012, 23 patients underwent single segmental cervical disc replacement with ProDisc-C, and the clinical data were retrospectively analyzed. Of 23 patients, 9 were male, and 14 were female with the age range from 27 to 65 years (mean, 45 years), and the disease duration ranged from 10 to 84 months (mean, 25 months). There were 15 patients with radiculopathy, 5 patients with myelopathy, and 3 patients with mixed cervical spondylosis. The involved segments were C4,5 in 5 cases, C5,6 in 14 cases, and C6,7 in 4 cases. Japanese Orthopaedic Association (JOA) score and neck disability index (NDI) were adopted to evaluate the effectiveness. Preoperative and Postoperative radiographic parameters, such as cervical overall range of motion (ROM), target segmental ROM, the adjacent segmental ROM, and intervertebral height were compared. Besides, the location changes of the COR of the target level were further analyzed by the alteration of its coordinates (COR-X, COR-Y), and the relationships between the location changes of the COR and the effectiveness or the radiographic results were analyzed. All the operations were completed successfully; 1 case had hoarseness after operation, which disappeared at 3 months after operation. All cases were followed up 18.3 months on average (range, 6-36 months). There was no device migration, loosening, subsidence, or fracture at last follow-up. The JOA score increased significantly and the NDI score decreased significantly at last follow-up when compared with preoperative scores (P < 0.05). No difference was found in the cervical overall ROM, target segmental ROM, the adjacent segmental ROM, and the COR-Y of the target level between pre-operation and last follow-up (P > 0.05); while the intervertebral height and the COR-X increased significantly (P < 0.05). The change of the COR-X had no obvious correlation with the postoperative JOA, NDI, and target segmental ROM (P > 0.05). According to whether the difference of the COR-X between pre- and post-operation was less than the average value 1.86 mm or not, the patients were divided into 2 groups; significant difference was shown in the postoperative target segmental ROM between 2 groups (P < 0.05), but no significant difference was found in the postoperative JOA, NDI, cervical overall ROM, adjacent segmental ROM, and the intervertebral height between 2 groups (P > 0.05). Single segmental cervical disc replacement with ProDisc-C can obtain satisfactory outcomes. The cervical overall ROM, target segmental ROM, and adjacent segmental ROM can be effectively maintained, and the intervertebral height is increased. The location of the flexion/extension COR of the target segment shifts forward after insertion of the ProDisc-C prosthesis, and the postoperative target segmental ROM becomes smaller as the distance of the displacement of the COR becomes greater.

Functionally referential and intentional communication in the domestic dog: effects of spatial and social contexts.

PubMed

Gaunet, Florence; Deputte, Bertrand L

2011-11-01

In apes, four criteria are set to explore referential and intentional communication: (1) successive visual orienting between a partner and distant targets, (2) the presence of apparent attention-getting behaviours, (3) the requirement of an audience to exhibit the behaviours, and (4) the influence of the direction of attention of an observer on the behaviours. The present study aimed at identifying these criteria in behaviours used by dogs in communicative episodes with their owner when their toy is out of reach, i.e. gaze at a hidden target or at the owner, gaze alternation between a hidden target and the owner, vocalisations and contacts. In this study, an additional variable was analysed: the position of the dog in relation to the location of the target. Dogs witnessed the hiding of a favourite toy, in a place where they could not get access to. We analysed how dogs engaged in communicative deictic behaviours in the presence of their owner; four heights of the target were tested. To control for the motivational effects of the toy on the dogs' behaviour and for the referential nature of the behaviours, observations were staged where only the toy or only the owner was present, for one of the four heights. The results show that gazing at the container and gaze alternation were used as functionally referential and intentional communicative behaviours. Behavioural patterns of dog position, the new variable, fulfilled the operational criteria for functionally referential behaviour and a subset of operational criteria for intentional communication: the dogs used their own position as a local enhancement signal. Finally, our results suggest that the dogs gazed at their owner at optimal locations in the experimental area, with respect to the target height and their owner's (or their own) line of gaze. © Springer-Verlag 2011

Growth Outcomes After GH Therapy of Patients Given Long-Term Corticosteroids for Juvenile Idiopathic Arthritis.

PubMed

David, Hélène; Aupiais, Camille; Louveau, Baptiste; Quartier, Pierre; Jacqz-Aigrain, Evelyne; Carel, Jean-Claude; Simon, Dominique

2017-12-01

Growth hormone (GH) therapy may improve statural growth outcomes in patients with severe juvenile idiopathic arthritis (JIA). To evaluate the effect of GH treatment on adult height and to identify determinants of growth outcomes in JIA. Data from 58 patients with JIA, including 53 receiving GH, enrolled in three prospective clinical trials between 1997 and 2002 were analyzed. GH (0.056 mg/kg/d [interquartile range (IQR), 0.050 to 0.062]) for a median duration of 6.5 years (IQR, 4.7 to 7.9 years). Factors associated with a favorable growth outcome (adult height - target height ≤ -1.5 standard deviations) were identified by multivariate logistic regression. Adult height was available for 48 patients 8.6 years after GH initiation (IQR, 6.0 to 10.2 years). Height standard deviation score (SDS) increased from -2.9 (IQR, -4.4 to -1.6) at baseline to -1.7 (IQR, -3.9 to -0.1) in adulthood (P < 0.001). Median adult height was below target height [SDS, -0.2 (IQR, -1.4 to 0.4); P < 0.001]. Corrected adult height SDS was -1.3 (IQR, -3.0 to -0.2). Growth outcome was favorable in 24 (52.2%) patients. Significant independent determinants of growth outcome were age at GH initiation [adjusted odds ratio (aOR), 0.68 per additional year; 95% confidence interval (CI), 0.47 to 0.99], height at GH initiation (aOR, 2.6 per additional SDS; 95% CI, 1.15 to 5.9), and mean C-reactive protein levels during follow up (aOR, 0.51 per additional 10 mg/L; 95% CI, 0.28 to 0.92). Long-term GH treatment significantly increased growth in patients with JIA but did not fully restore the genetic growth potential. The response showed marked interindividual variability and was weaker in patients with severe inflammation. Copyright © 2017 Endocrine Society

Adult height in patients with familial male-limited precocious puberty and the role of an aromatase inhibitor in patient management.

PubMed

Lane, Laura C; Flowers, Josephine; Johnstone, Helen; Cheetham, Tim

2018-04-25

There is little adult height data in patients with familial male-limited precocious puberty (FMPP) and no management consensus. We assessed the treatment and adult height in local patients with FMPP and those reported in the literature. Growth data were obtained on four local patients with FMPP and a search performed to obtain management details and adult height data on cases in the literature. UK (90) population standards were used to calculate standard deviation scores (SDS). Adult height data were available on 25 men with FMPP of whom 21 were treated. Median adult height SDS of patients was -1.5 SD with a mid-parental target of -0.6 SD (p=0.1). Eight patients (32%) had an adult height above the mid-parental target and seven patients (28%) had a height >2 SD below the mean. The median height SD was -0.03 in untreated patients and +0.5 SD in those receiving an aromatase inhibitor. There was no relationship between height and age at presentation. Aromatase inhibitor therapy is associated with a positive height outcome in FMPP but the outcome with and without intervention is unpredictable. Clinicians need to be cautious when counselling families about the potential height outcome in FMPP.

Do centimetres matter? Self-reported versus estimated height measurements in parents.

PubMed

Gozzi, T; Flück, Ce; L'allemand, D; Dattani, M T; Hindmarsh, P C; Mullis, P E

2010-04-01

An impressive discrepancy between reported and measured parental height is often observed. The aims of this study were: (a) to assess whether there is a significant difference between the reported and measured parental height; (b) to focus on the reported and, thereafter, measured height of the partner; (c) to analyse its impact on the calculated target height range. A total of 1542 individual parents were enrolled. The parents were subdivided into three groups: normal height (3-97th Centile), short (<3%) and tall (>97%) stature. Overall, compared with men, women were far better in estimating their own height (p < 0.001). Where both partners were of normal, short or tall stature, the estimated heights of their partner were quite accurate. Women of normal stature underestimated the short partner and overestimated the tall partner, whereas male partners of normal stature overestimated both their short as well as tall partners. Women of tall stature estimated the heights of their short partners correctly, whereas heights of normal statured men were underestimated. On the other hand, tall men overestimated the heights of their female partners who are of normal and short stature. Furthermore, women of short stature estimated the partners of normal stature adequately, and the heights of their tall partners were overestimated. Interestingly, the short men significantly underestimated the normal, but overestimated tall female partners. Only measured heights should be used to perform accurate evaluations of height, particularly when diagnostic tests or treatment interventions are contemplated. For clinical trails, we suggest that only quality measured parental heights are acceptable, as the errors incurred in estimates may enhance/conceal true treatment effects.

Effects of body habitus on internal radiation dose calculations using the 5-year-old anthropomorphic male models.

PubMed

Xie, Tianwu; Kuster, Niels; Zaidi, Habib

2017-07-13

Computational phantoms are commonly used in internal radiation dosimetry to assess the amount and distribution pattern of energy deposited in various parts of the human body from different internal radiation sources. Radiation dose assessments are commonly performed on predetermined reference computational phantoms while the argument for individualized patient-specific radiation dosimetry exists. This study aims to evaluate the influence of body habitus on internal dosimetry and to quantify the uncertainties in dose estimation correlated with the use of fixed reference models. The 5-year-old IT'IS male phantom was modified to match target anthropometric parameters, including body weight, body height and sitting height/stature ratio (SSR), determined from reference databases, thus enabling the creation of 125 5-year-old habitus-dependent male phantoms with 10th, 25th, 50th, 75th and 90th percentile body morphometries. We evaluated the absorbed fractions and the mean absorbed dose to the target region per unit cumulative activity in the source region (S-values) of F-18 in 46 source regions for the generated 125 anthropomorphic 5-year-old hybrid male phantoms using the Monte Carlo N-Particle eXtended general purpose Monte Carlo transport code and calculated the absorbed dose and effective dose of five 18 F-labelled radiotracers for children of various habitus. For most organs, the S-value of F-18 presents stronger statistical correlations with body weight, standing height and sitting height than BMI and SSR. The self-absorbed fraction and self-absorbed S-values of F-18 and the absorbed dose and effective dose of 18 F-labelled radiotracers present with the strongest statistical correlations with body weight. For 18 F-Amino acids, 18 F-Brain receptor substances, 18 F-FDG, 18 F-L-DOPA and 18 F-FBPA, the mean absolute effective dose differences between phantoms of different habitus and fixed reference models are 11.4%, 11.3%, 10.8%, 13.3% and 11.4%, respectively. Total body weight, standing height and sitting height have considerable effects on human internal dosimetry. Radiation dose calculations for individual subjects using the most closely matched habitus-dependent computational phantom should be considered as an alternative to improve the accuracy of the estimates.

Effects of body habitus on internal radiation dose calculations using the 5-year-old anthropomorphic male models

NASA Astrophysics Data System (ADS)

Xie, Tianwu; Kuster, Niels; Zaidi, Habib

2017-08-01

Computational phantoms are commonly used in internal radiation dosimetry to assess the amount and distribution pattern of energy deposited in various parts of the human body from different internal radiation sources. Radiation dose assessments are commonly performed on predetermined reference computational phantoms while the argument for individualized patient-specific radiation dosimetry exists. This study aims to evaluate the influence of body habitus on internal dosimetry and to quantify the uncertainties in dose estimation correlated with the use of fixed reference models. The 5-year-old IT’IS male phantom was modified to match target anthropometric parameters, including body weight, body height and sitting height/stature ratio (SSR), determined from reference databases, thus enabling the creation of 125 5-year-old habitus-dependent male phantoms with 10th, 25th, 50th, 75th and 90th percentile body morphometries. We evaluated the absorbed fractions and the mean absorbed dose to the target region per unit cumulative activity in the source region (S-values) of F-18 in 46 source regions for the generated 125 anthropomorphic 5-year-old hybrid male phantoms using the Monte Carlo N-Particle eXtended general purpose Monte Carlo transport code and calculated the absorbed dose and effective dose of five 18F-labelled radiotracers for children of various habitus. For most organs, the S-value of F-18 presents stronger statistical correlations with body weight, standing height and sitting height than BMI and SSR. The self-absorbed fraction and self-absorbed S-values of F-18 and the absorbed dose and effective dose of 18F-labelled radiotracers present with the strongest statistical correlations with body weight. For 18F-Amino acids, 18F-Brain receptor substances, 18F-FDG, 18F-L-DOPA and 18F-FBPA, the mean absolute effective dose differences between phantoms of different habitus and fixed reference models are 11.4%, 11.3%, 10.8%, 13.3% and 11.4%, respectively. Total body weight, standing height and sitting height have considerable effects on human internal dosimetry. Radiation dose calculations for individual subjects using the most closely matched habitus-dependent computational phantom should be considered as an alternative to improve the accuracy of the estimates.

A Critical Appraisal of the Effect of Gonadotropin-Releasing Hormon Analog Treatment on Adult Height of Girls with Central Precocious Puberty

PubMed Central

Bereket, Abdullah

2017-01-01

Central precocious puberty (CPP) is a diagnosis that pediatric endocrinologists worldwide increasingly make in girls of age 6-8 years and is mostly idiopathic. Part of the reason for increasing referral and diagnosis is the perception among the doctors as well as the patients that treatment of CPP with long-acting gonadotropin-releasing hormon analogues (GnRHa) promote height of the child. Although, the timing and the tempo of puberty does influence statural growth and achieved adult height, the extent of this effect is variable depending on several factors and is modest in most cases. Studies investigating GnRHa treatment in girls with idiopathic CPP demonstrate that treatment is able to restore adult height compromised by precocious puberty. However, reports on untreated girls with precocious puberty demonstrate that some of these girls achieve their target height without treatment as well, thus, blurring the net effect of GnRHa treatment on height in girls with CPP. Clinical studies on treatment of girls with idiopathic CPP on adult stature suffers from the solid evidence-base due mainly to the lack of well-designed randomized controlled studies and our insufficiencies of predicting adult height of a child with narrow precision. This is particularly true for girls in whom age of pubertal onset is close to physiological age of puberty, which are the majority of cases treated with GnRHa nowadays. Heterogeneous nature of pubertal tempo (progressive vs. nonprogressive) leading to different height outcomes also complicates the interpretation of the results in both treated and untreated cases. This review will attemp to summarize and critically appraise available data in the field. PMID:29280737

Phenology largely explains taller grass at successful nests in greater sage-grouse.

PubMed

Smith, Joseph T; Tack, Jason D; Doherty, Kevin E; Allred, Brady W; Maestas, Jeremy D; Berkeley, Lorelle I; Dettenmaier, Seth J; Messmer, Terry A; Naugle, David E

2018-01-01

Much interest lies in the identification of manageable habitat variables that affect key vital rates for species of concern. For ground-nesting birds, vegetation surrounding the nest may play an important role in mediating nest success by providing concealment from predators. Height of grasses surrounding the nest is thought to be a driver of nest survival in greater sage-grouse ( Centrocercus urophasianus ; sage-grouse), a species that has experienced widespread population declines throughout their range. However, a growing body of the literature has found that widely used field methods can produce misleading inference on the relationship between grass height and nest success. Specifically, it has been demonstrated that measuring concealment following nest fate (failure or hatch) introduces a temporal bias whereby successful nests are measured later in the season, on average, than failed nests. This sampling bias can produce inference suggesting a positive effect of grass height on nest survival, though the relationship arises due to the confounding effect of plant phenology, not an effect on predation risk. To test the generality of this finding for sage-grouse, we reanalyzed existing datasets comprising >800 sage-grouse nests from three independent studies across the range where there was a positive relationship found between grass height and nest survival, including two using methods now known to be biased. Correcting for phenology produced equivocal relationships between grass height and sage-grouse nest survival. Viewed in total, evidence for a ubiquitous biological effect of grass height on sage-grouse nest success across time and space is lacking. In light of these findings, a reevaluation of land management guidelines emphasizing specific grass height targets to promote nest success may be merited.

Genetic Variants Related to Height and Risk of Atrial Fibrillation

PubMed Central

Rosenberg, Michael A.; Kaplan, Robert C.; Siscovick, David S.; Psaty, Bruce M.; Heckbert, Susan R.; Newton-Cheh, Christopher; Mukamal, Kenneth J.

2014-01-01

Increased height is a known independent risk factor for atrial fibrillation (AF). However, whether genetic determinants of height influence risk is uncertain. In this candidate gene study, we examined the association of 209 height-associated single-nucleotide polymorphisms (SNPs) with incident AF in 3,309 persons of European descent from the Cardiovascular Health Study, a prospective cohort study of older adults (aged ≥65 years) enrolled in 1989–1990. After a median follow-up period of 13.2 years, 879 participants developed incident AF. The height-associated SNPs together explained approximately 10% of the variation in height (P = 6.0 × 10−8). Using an unweighted genetic height score, we found a nonsignificant association with risk of AF (per allele, hazard ratio = 1.01, 95% confidence interval: 1.00, 1.02; P = 0.06). In weighted analyses, we found that genetically predicted height was strongly associated with AF risk (per 10 cm, hazard ratio = 1.30, 95% confidence interval: 1.03, 1.64; P = 0.03). Importantly, for all models, the inclusion of actual height completely attenuated the genetic height effect. Finally, we identified 1 nonsynonymous SNP (rs1046934) that was independently associated with AF and may warrant future study. In conclusion, we found that genetic determinants of height appear to increase the risk of AF, primarily via height itself. This approach of examining SNPs associated with an intermediate phenotype should be considered as a method for identifying novel genetic targets. PMID:24944287

Genetic and Environmental Effects on Weight, Height, and BMI Under 18 Years in a Chinese Population-Based Twin Sample.

PubMed

Liu, Qingqing; Yu, Canqing; Gao, Wenjing; Cao, Weihua; Lyu, Jun; Wang, Shengfeng; Pang, Zengchang; Cong, Liming; Dong, Zhong; Wu, Fan; Wang, Hua; Wu, Xianping; Jiang, Guohong; Wang, Binyou; Li, Liming

2015-10-01

This study examined the genetic and environmental effects on variances in weight, height, and body mass index (BMI) under 18 years in a population-based sample from China. We selected 6,644 monozygotic and 5,969 dizygotic twin pairs from the Chinese National Twin Registry (CNTR) aged under 18 years (n = 12,613). Classic twin analyses with sex limitation were used to estimate the genetic and environmental components of weight, height, and BMI in six age groups. Sex-limitation of genetic and shared environmental effects was observed, especially when puberty begins. Heritability for weight, height, and BMI was low at 0-2 years old (less than 20% for both sexes) but increased over time, accounting for half or more of the variance in the 15-17 year age group for boys. For girls, heritabilities for weight, height and BMI was maintained at approximately 30% after puberty. Common environmental effects on all body measures were high for girls (59-87%) and presented a small peak during puberty. Genetics appear to play an increasingly important role in explaining the variation in weight, height, and BMI from early childhood to late adolescence, particularly in boys. Common environmental factors exert their strongest and most independent influence specifically in the pre-adolescent period and more significantly in girls. These findings emphasize the need to target family and social environmental interventions in early childhood years, especially for females. Further studies about puberty-related genes and social environment are needed to clarify the mechanism of sex differences.

A comprehensive team approach to the management of patients with Prader-Willi syndrome.

PubMed

Eiholzer, Urs; Whitman, Barbara Y

2004-09-01

Prader-Willi syndrome (PWS) is a genetic disorder characterized by extreme obesity accompanied by other, multisystem clinical manifestations encompassing both physical and behavioral/cognitive abnormalities. The multi-dimensional problems of patients with PWS cannot be treated with a single intervention and benefit from a team approach to management to optimize outcomes. Childhood stature below target height and reduced final height are some defining characteristics of PWS, and compelling evidence from growth hormone (GH) treatment trials suggests that hypothalamic GH deficiency exists. Treatment with GH has been shown to increase height velocity in children with PWS, decrease weight-for-height index values and body fat mass, and have a positive effect on lean body mass during at least the first year of therapy. In addition to medical concerns, the behavioral manifestations, including an uncorrectable deficit in appetite control, and cognitive limitations associated with PWS, require long-term multidisciplinary management.

Don't Look down: Emotional Arousal Elevates Height Perception

ERIC Educational Resources Information Center

Stefanucci, Jeanine K.; Storbeck, Justin

2009-01-01

In a series of experiments, it was found that emotional arousal can influence height perception. In Experiment 1, participants viewed either arousing or nonarousing images before estimating the height of a 2-story balcony and the size of a target on the ground below the balcony. People who viewed arousing images overestimated height and target…

Vertical variation of ice particle size in convective cloud tops.

PubMed

van Diedenhoven, Bastiaan; Fridlind, Ann M; Cairns, Brian; Ackerman, Andrew S; Yorks, John E

2016-05-16

A novel technique is used to estimate derivatives of ice effective radius with respect to height near convective cloud tops ( dr e / dz ) from airborne shortwave reflectance measurements and lidar. Values of dr e / dz are about -6 μ m/km for cloud tops below the homogeneous freezing level, increasing to near 0 μ m/km above the estimated level of neutral buoyancy. Retrieved dr e / dz compares well with previously documented remote sensing and in situ estimates. Effective radii decrease with increasing cloud top height, while cloud top extinction increases. This is consistent with weaker size sorting in high, dense cloud tops above the level of neutral buoyancy where fewer large particles are present, and with stronger size sorting in lower cloud tops that are less dense. The results also confirm that cloud-top trends of effective radius can generally be used as surrogates for trends with height within convective cloud tops. These results provide valuable observational targets for model evaluation.

Vertical Variation of Ice Particle Size in Convective Cloud Tops

NASA Technical Reports Server (NTRS)

Van Diedenhoven, Bastiaan; Fridlind, Ann M.; Cairns, Brian; Ackerman, Andrew S.; Yorks, John E.

2016-01-01

A novel technique is used to estimate derivatives of ice effective radius with respect to height near convective cloud tops (dr(sub e)/dz) from airborne shortwave reflectance measurements and lidar. Values of dr(sub e)/dz are about -6 micrometer/km for cloud tops below the homogeneous freezing level, increasing to near 0 micrometer/km above the estimated level of neutral buoyancy. Retrieved dr(sub e)/dz compares well with previously documented remote sensing and in situ estimates. Effective radii decrease with increasing cloud top height, while cloud top extinction increases. This is consistent with weaker size sorting in high, dense cloud tops above the level of neutral buoyancy where fewer large particles are present and with stronger size sorting in lower cloud tops that are less dense. The results also confirm that cloud top trends of effective radius can generally be used as surrogates for trends with height within convective cloud tops. These results provide valuable observational targets for model evaluation.

Effects and safety of combination therapy with gonadotropin-releasing hormone analogue and growth hormone in girls with idiopathic central precocious puberty: a meta-analysis.

PubMed

Liu, S; Liu, Q; Cheng, X; Luo, Y; Wen, Y

2016-10-01

This meta-analysis is to evaluate the effects and safety of the combination therapy for girls with idiopathic central precocious puberty (ICPP). Electronic databases were searched for randomized controlled trials (RCTs) and clinical controlled trials (CCTs) that adopted gonadotropin-releasing hormone analogue (GnRHa) therapy and GnRHa plus growth hormone (GH) combination therapy to treat ICPP girls. A total of six RCTs (162 patients) and six CCTs (247 patients) were included. Compared to the GnRHa therapy group, the combination therapy group achieved taller final height (mean difference, MD = 2.81 cm, 95 % CI 1.76-3.87, four CCTs; MD = 4.30 cm, 95 % CI 0.59-8.01, one RCT); greater progression of final height compared with target height (MD = 3.92 cm, 95 % CI 3.12-4.73, four CCTs; MD = 4.00 cm, 95 % CI 1.93-6.07, One RCT) and larger height gains (MD = 3.49 cm, 95 % CI 0.97-6.01, four CCTs; MD = 3.88 cm, 95 % CI 0.15-7.61, one RCT). No severe adverse effects of treatment were reported. For ICPP girls, the GnRHa and GH combination therapy had advantages over GnRHa alone on final height and no severe adverse effects were reported. We recommend comprehensive assessment of the individual growth rate, patient compliance, the clinical effects, the height expectations of individual patients and the treatment cost to the family in order to identify the best therapy for individual patients.

Vowel category dependence of the relationship between palate height, tongue height, and oral area.

PubMed

Hasegawa-Johnson, Mark; Pizza, Shamala; Alwan, Abeer; Cha, Jul Setsu; Haker, Katherine

2003-06-01

This article evaluates intertalker variance of oral area, logarithm of the oral area, tongue height, and formant frequencies as a function of vowel category. The data consist of coronal magnetic resonance imaging (MRI) sequences and acoustic recordings of 5 talkers, each producing 11 different vowels. Tongue height (left, right, and midsagittal), palate height, and oral area were measured in 3 coronal sections anterior to the oropharyngeal bend and were subjected to multivariate analysis of variance, variance ratio analysis, and regression analysis. The primary finding of this article is that oral area (between palate and tongue) showed less intertalker variance during production of vowels with an oral place of articulation (palatal and velar vowels) than during production of vowels with a uvular or pharyngeal place of articulation. Although oral area variance is place dependent, percentage variance (log area variance) is not place dependent. Midsagittal tongue height in the molar region was positively correlated with palate height during production of palatal vowels, but not during production of nonpalatal vowels. Taken together, these results suggest that small oral areas are characterized by relatively talker-independent vowel targets and that meeting these talker-independent targets is important enough that each talker adjusts his or her own tongue height to compensate for talker-dependent differences in constriction anatomy. Computer simulation results are presented to demonstrate that these results may be explained by an acoustic control strategy: When talkers with very different anatomical characteristics try to match talker-independent formant targets, the resulting area variances are minimized near the primary vocal tract constriction.

[Final height in symptomatic boys with late-onset adrenal hyperplasia (LOCAH), treated with glucocorticoids. Clinical cases].

PubMed

Pasqualini, Titania; Alonso, Guillermo; Fernández, Cecilia; Buzzalino, Noemí; Dain, Liliana

2013-04-01

Although corticoid replacement is recommended for those late-onset adrenal hyperplasia with clinical manifestations, asymptomatic patients do not need treatment. We describe clinical features at diagnosis, treatment, and growth till adult- height, in 4 boys. At diagnosis, age ranged from 9.2-11.6 years. The initial symptoms/signs were: precocious pubarche (n = 2), accelerated bone age (n = 1) and precocious puberty (n = 1). All of them presented elevated 17 hydroxyprogesterone levels and were compound heterozygotes carrying p.V281L mutation. Since, at diagnosis, bone age was significantly advanced for chronological age (13.1 ± 0.5 vs. 10.2 ± 1.1 p = 0.008), hydrocortisone therapy was initiated. During follow-up, mean height Z score decreased 1.4 ± 0.4 SDS (p = 0.007), though adult mean height was not different from target height (-0.39 ± 0.7 vs. -0.04 ± 0.5 SDS, p = 0.054). In conclusion, in 4 symptomatic patients, accurate treatment of late-onset adrenal hyperplasia led to an adult mean height not different from target height. Advanced bone age at diagnosis and the loss of height during pubertal development suggest the need of therapy.

The Effect of Sex and Anthropometry on Clinical Outcomes in Patients Undergoing Percutaneous Coronary Intervention for Complex Coronary Lesions.

PubMed

Lee, Seung Yul; Shin, Dong Ho; Kim, Jung Sun; Kim, Byeong Keuk; Ko, Young Guk; Choi, Donghoon; Jang, Yangsoo; Hong, Myeong Ki

2017-03-01

To evaluate the effects of sex and anthropometry on clinical outcomes in patients who underwent percutaneous coronary intervention (PCI). From three randomized trials (REal Safety and Efficacy of 3-month dual antiplatelet Therapy following Endeavor zotarolimus-eluting stent implantation, Impact of intraVascular UltraSound guidance on outcomes of Xience Prime stents in Long lesions, Chronic Total Occlusion InterVention with drUg-eluting Stents), we compared 333 pairs of men and women matched by propensity scores, all of whom underwent intravascular ultrasound (IVUS)-guided PCI for complex lesions. For 12 months, the incidence of adverse cardiac events, defined as the composite of cardiac death, target lesion-related myocardial infarction, and target lesion revascularization, was not different between women and men (2.4% vs. 2.4%, p=0.939). Using multivariable Cox's regression analysis, post-intervention minimum lumen area [MLA; hazard ratio (HR)=0.620, 95% confidence interval (CI)=0.423-0.909, p=0.014] by IVUS was a predictor of adverse cardiac events. Height on anthropometry and lesions with chronic total occlusion were significantly related to post-intervention MLA. However, female sex was not independently associated with post-intervention MLA. In an age and sex-adjusted model, patients in the low tertile of height exhibited a greater risk for adverse cardiac events than those in the high tertile of height (HR=6.391, 95% CI=1.160-35.206, p=0.033). Sex does not affect clinical outcomes after PCI for complex lesions. PCI outcomes, however, may be adversely affected by height.

Modeling determinants of growth: evidence for a community-based target in height?

PubMed

Aßmann, Christian; Hermanussen, Michael

2013-07-01

Human growth is traditionally envisaged as a target-seeking process regulated by genes, nutrition, health, and the state of an individual's social and economic environment; it is believed that under optimal physical conditions, an individual will achieve his or her full genetic potential. Using a panel data set on individual height increments, we suggest a statistical modeling approach that characterizes growth as first-order trend stationary and allows for controlling individual growth tempo via observable measures of individual maturity. A Bayesian framework and corresponding Markov-chain Monte Carlo techniques allowing for a conceptually stringent treatment of missing values are adapted for parameter estimation. The model provides evidence for the adjustment of the individual growth rate toward average height of the population. The increase in adult body height during the past 150 y has been explained by the steady improvement of living conditions that are now being considered to have reached an optimum in Western societies. The current investigation questions the notion that the traditional concept in the understanding of this target-seeking process is sufficient. We consider an additional regulator that possibly points at community-based target seeking in growth.

Relationship between final height and health outcomes in adults with congenital adrenal hyperplasia: United Kingdom congenital adrenal hyperplasia adult study executive (CaHASE).

PubMed

Han, T S; Conway, G S; Willis, D S; Krone, N; Rees, D A; Stimson, R H; Arlt, W; Walker, B R; Ross, R J

2014-08-01

Treatment of congenital adrenal hyperplasia (CAH) in childhood focuses on growth and development and adult final height (FH) is a measure of effective treatment. We hypothesized that shorter adults will have more severe underlying disease and worse health outcomes. This was a cross-sectional analysis of 199 adults with CAH. FH and quality of life were expressed as z-scores adjusted for midparental target height or UK population height. FH correlated inversely with age (men, r = -0.38; women, r = -0.26, P < .01). Men and women had z-scores adjusted for midparental target height of -2 and -1, respectively, and both groups had UK population height z-scores of -1 below the UK population (P < .01). In women, FH was shorter in non-salt-wasting than salt-wasting classic CAH (P < .05) and in moderately affected genotype group B women than either more severely affected groups null and A (P < .01) or the mildest group C (P < .001). Short stature and a higher prevalence of hypertension were observed in classic CAH patients diagnosed late (after 1 y) compared with those diagnosed early and in women treated with glucocorticoid only compared with those treated with both glucocorticoids and mineralocorticoids (P < .05). FH did not associate with insulin sensitivity, lipid profile, adiposity, or quality of life. Adult CAH patients remain short, although height prognosis has improved over time. The shortest adults are those diagnosed late with moderate severity CAH and are at increased risk of adult hypertension; we hypothesize that these patients are exposed in childhood to high androgens and/or excessive glucocorticoids with potential programming of hypertension. Another possibility is inadequate mineralocorticoid treatment early in life in the late-diagnosed patient group. Prospective studies are now required to examine these hypotheses.

Analysis of the COS/NUV Extraction Box Heights

NASA Astrophysics Data System (ADS)

Synder, Elaine M.; Sonnentrucker, Paule

2017-08-01

We present a diagnostic test of the extraction box heights (EBHs) used when extracting NUV spectroscopic data. This study was motivated by a discrepancy between the EBH used by the COS Exposure Time Calculator during observation planning (8 pixels) and the COS calibration pipeline (CALCOS) during the creation of the final spectra (57 pixels). In this Instrument Science Report, we study the effects of decreasing the EBH on the net counts and signal-to-noise ratio for CALCOS-reduced spectra of many different targets. We also provide detailed instructions for users who wish to perform a custom extraction for their data

Growth hormone treatment of idiopathic short stature: analysis of the database from KIGS, the Kabi Pharmacia International Growth Study.

PubMed

Ranke, M B; Lindberg, A

1994-12-01

Within the Kabi Pharmacia International Growth Study (KIGS) database, there is information on 1017 (700 male/317 female) patients with idiopathic short stature (ISS). These patients were started on recombinant human growth hormone (GH) at a median age of 10.8 years, a bone age of -1.8 SDS, a height of -2.6 SDS and a predicted adult height (PAH) (Bailey-Pinneau method) of -2.5 SDS. The median dose of GH was 0.6 IU/kg body weight/week and the frequency of injections was six/week. According to the relationship with target height the patients were classified into 'familial short stature (FSS)' (height SDS > target height SDS -1.28) and into 'non-FSS' (height SDS < target height SDS -1.28). During the first year of GH treatment there was an overall increment in the median height velocity from 4.4 to 7.4 cm/year. Over 3 years of GH treatment, cross-sectional analysis demonstrated an overall increment in median PAH of 1.2 SDS. There was a positive correlation between gain in PAH and the GH dose (n = 202, r = 0.18, p < 0.01) during the first year. Longitudinal analysis in 84 patients showed an overall increment of PAH of 0.7 SDS over 2 years of treatment. When applying the KIGS first-year prediction model for patients with idiopathic GH deficiency on cohorts of prepubertal children with FSS and non-FSS, a lower responsiveness to GH in the non-FSS group was observed. It is concluded that higher than substitutive doses of GH are required for the long-term improvement of growth in ISS.

Genetic variants related to height and risk of atrial fibrillation: the cardiovascular health study.

PubMed

Rosenberg, Michael A; Kaplan, Robert C; Siscovick, David S; Psaty, Bruce M; Heckbert, Susan R; Newton-Cheh, Christopher; Mukamal, Kenneth J

2014-07-15

Increased height is a known independent risk factor for atrial fibrillation (AF). However, whether genetic determinants of height influence risk is uncertain. In this candidate gene study, we examined the association of 209 height-associated single-nucleotide polymorphisms (SNPs) with incident AF in 3,309 persons of European descent from the Cardiovascular Health Study, a prospective cohort study of older adults (aged ≥ 65 years) enrolled in 1989-1990. After a median follow-up period of 13.2 years, 879 participants developed incident AF. The height-associated SNPs together explained approximately 10% of the variation in height (P = 6.0 × 10(-8)). Using an unweighted genetic height score, we found a nonsignificant association with risk of AF (per allele, hazard ratio = 1.01, 95% confidence interval: 1.00, 1.02; P = 0.06). In weighted analyses, we found that genetically predicted height was strongly associated with AF risk (per 10 cm, hazard ratio = 1.30, 95% confidence interval: 1.03, 1.64; P = 0.03). Importantly, for all models, the inclusion of actual height completely attenuated the genetic height effect. Finally, we identified 1 nonsynonymous SNP (rs1046934) that was independently associated with AF and may warrant future study. In conclusion, we found that genetic determinants of height appear to increase the risk of AF, primarily via height itself. This approach of examining SNPs associated with an intermediate phenotype should be considered as a method for identifying novel genetic targets. © The Author 2014. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

A numerical analysis of flat fan aerial crop spray

NASA Astrophysics Data System (ADS)

Malik Fesal, Siti Natasha; Fawzi, Mas; Omar, Zamri

2017-09-01

Spray drift mitigation, in the agriculture aerial spraying literature, and spray quality in the application of plant protection products, still continues as two critical components in evaluating shareholder value. A study on off-target drift and ground deposit onto a 250 m strip were simulated through series of Computational Fluid Dynamic (CFD) simulations. The drift patterns for evaporating droplets were released from a constant aircraft velocity at 30 m/s (60 mph) carrying 20 m swath width spray boom with 12 fan-type nozzles at released height from the ground ranging from 3.7 m to 4.7 m. Droplet trajectories are calculated from the given airspeed with a Lagrangian model for particle dispersion excluding any wind effect perturbation. The proposed CFD’s model predictions agreed well with cited literatures for a wide range of atmospheric stability values. The results revealed that there is considerable increased in spray drift and droplets trajectories with the increased in spray released height. It suggested that a combination of low aircraft spray released height with low airspeed is essential to improve spray quality and maximizing uniform deposition on the target area are significant in minimizing spray drift risks.

The Effect of Sex and Anthropometry on Clinical Outcomes in Patients Undergoing Percutaneous Coronary Intervention for Complex Coronary Lesions

PubMed Central

Lee, Seung-Yul; Shin, Dong-Ho; Kim, Jung-Sun; Kim, Byeong-Keuk; Ko, Young-Guk; Choi, Donghoon; Jang, Yangsoo

2017-01-01

Purpose To evaluate the effects of sex and anthropometry on clinical outcomes in patients who underwent percutaneous coronary intervention (PCI). Materials and Methods From three randomized trials (REal Safety and Efficacy of 3-month dual antiplatelet Therapy following Endeavor zotarolimus-eluting stent implantation, Impact of intraVascular UltraSound guidance on outcomes of Xience Prime stents in Long lesions, Chronic Total Occlusion InterVention with drUg-eluting Stents), we compared 333 pairs of men and women matched by propensity scores, all of whom underwent intravascular ultrasound (IVUS)-guided PCI for complex lesions. Results For 12 months, the incidence of adverse cardiac events, defined as the composite of cardiac death, target lesion–related myocardial infarction, and target lesion revascularization, was not different between women and men (2.4% vs. 2.4%, p=0.939). Using multivariable Cox's regression analysis, post-intervention minimum lumen area [MLA; hazard ratio (HR)=0.620, 95% confidence interval (CI)=0.423–0.909, p=0.014] by IVUS was a predictor of adverse cardiac events. Height on anthropometry and lesions with chronic total occlusion were significantly related to post-intervention MLA. However, female sex was not independently associated with post-intervention MLA. In an age and sex-adjusted model, patients in the low tertile of height exhibited a greater risk for adverse cardiac events than those in the high tertile of height (HR=6.391, 95% CI=1.160–35.206, p=0.033). Conclusion Sex does not affect clinical outcomes after PCI for complex lesions. PCI outcomes, however, may be adversely affected by height. PMID:28120559

Neural-Network Approach to Hyperspectral Data Analysis for Volcanic Ash Clouds Monitoring

NASA Astrophysics Data System (ADS)

Piscini, Alessandro; Ventress, Lucy; Carboni, Elisa; Grainger, Roy Gordon; Del Frate, Fabio

2015-11-01

In this study three artificial neural networks (ANN) were implemented in order to emulate a retrieval model and to estimate the ash Aerosol optical Depth (AOD), particle effective radius (reff) and cloud height from volcanic eruption using hyperspectral remotely sensed data. ANNs were trained using a selection of Infrared Atmospheric Sounding Interferometer (IASI) channels in Thermal Infrared (TIR) as inputs, and the corresponding ash parameters retrieved obtained using the Oxford retrievals as target outputs. The retrieval is demonstrated for the eruption of the Eyjafjallajo ̈kull volcano (Iceland) occurred in 2010. The results of validation provided root mean square error (RMSE) values between neural network outputs and targets lower than standard deviation (STD) of corresponding target outputs, therefore demonstrating the feasibility to estimate volcanic ash parameters using an ANN approach, and its importance in near real time monitoring activities, owing to its fast application. A high accuracy has been achieved for reff and cloud height estimation, while a decreasing in accuracy was obtained when applying the NN approach for AOD estimation, in particular for those values not well characterized during NN training phase.

Stimulating seedling growth in early stages of secondary forest succession: a modeling approach to guide tree liberation

PubMed Central

van Kuijk, Marijke; Anten, Niels P. R.; Oomen, Roelof J.; Schieving, Feike

2014-01-01

Excessive growth of non-woody plants and shrubs on degraded lands can strongly hamper tree growth and thus secondary forest succession. A common method to accelerate succession, called liberation, involves opening up the vegetation canopy around young target trees. This can increase growth of target trees by reducing competition for light with neighboring plants. However, liberation has not always had the desired effect, likely due to differences in light requirement between tree species. Here we present a 3D-model, which calculates photosynthetic rate of individual trees in a vegetation stand. It enables us to examine how stature, crown structure, and physiological traits of target trees and characteristics of the surrounding vegetation together determine effects of light on tree growth. The model was applied to a liberation experiment conducted with three pioneer species in a young secondary forest in Vietnam. Species responded differently to the treatment depending on their height, crown structure and their shade-tolerance level. Model simulations revealed practical thresholds over which the tree growth response is heavily influenced by the height and density of surrounding vegetation and gap radius. There were strong correlations between calculated photosynthetic rates and observed growth: the model was well able to predict growth of trees in young forests and the effects of liberation there upon. Thus, our model serves as a useful tool to analyze light competition between young trees and surrounding vegetation and may help assess the potential effect of tree liberation. PMID:25101100

Training Visual Control in Wheelchair Basketball Shooting

ERIC Educational Resources Information Center

Oudejans, Raoul R. D.; Heubers, Sjoerd; Ruitenbeek, Jean-Rene J. A. C.; Janssen, Thomas W. J.

2012-01-01

We examined the effects of visual control training on expert wheelchair basketball shooting, a skill more difficult than in regular basketball, as players shoot from a seated position to the same rim height. The training consisted of shooting with a visual constraint that forced participants to use target information as late as possible.…

Growth in disorders of adrenal hyperfunction.

PubMed

Magiakou, Maria Alexandra

2004-08-01

This article reviews how growth is affected in disorders of adrenal hyperfunction. Growth is disturbed by adrenal hypersecretion of androgens or cortisol. Adrenal androgens, when in excess, lead to advanced linear growth and skeletal maturation, and prolonged hypercortisolemia leads to the suppression of growth hormone (GH) secretion and inhibition of somatomedin C and other growth factor effects on their target tissues. In virilizing adrenal tumors height is increased at diagnosis, but after surgical cure the final height is usually in the normal range. In congenital adrenal hyperplasia height is usually compromised by advanced skeletal maturation or by suppressed growth, particularly in the first years of life, due to excess glucocorticoid treatment. The final height is reduced in both clinical forms (salt wasting and simple virilizing) and sexes in patients with congenital adrenal hyperplasia due to 21-hydroxylase deficiency. Growth impairment is also the hallmark of Cushing syndrome of whatever etiology when it occurs in children and growing adolescents, and the final height of these patients, even after surgical cure, remains compromised. This is apparently due to direct or indirect growth impairment by the hypercortisolism during the disease, followed by inadequate catch-up growth. Although it seems that GH treatment might be beneficial for improving final height both in patients with congenital adrenal hyperplasia who have poor height predictions and in patients with Cushing disease and GH deficiency, a larger number of studies is needed to confirm this suggestion.

Height conditions salary expectations: Evidence from large-scale data in China

NASA Astrophysics Data System (ADS)

Yang, Xiao; Gao, Jian; Liu, Jin-Hu; Zhou, Tao

2018-07-01

Height premium has been revealed by extensive literature, however, evidence from China based on large-scale data remains still lacking. In this paper, we study how height conditions salary expectations by exploring a dataset covering over 140,000 Chinese job seekers. By using graphical and regression models, we find evidence in support of height premium that tall people expect a significantly higher salary in career development. In particular, regression results suggest stronger effects of height premium on female than on male, however, the gender differences decrease as the education level increases and become insignificant after holding all control variables fixed. Further, results from graphical models suggest three promising ways in helping short people: (i) to accumulate more working experiences, since one year seniority can respectively make up about 3 cm and 7 cm shortness for female and male; (ii) to increase the level of education, since one higher academic degree may eliminate all disadvantages that brought by shortness; (iii) to target jobs in regions with a higher level of development. Our work provides a cross-culture supportive evidence of height premium and contributes two novel features to the literature: the compensation story in helping short people, and the focus on salary expectations in isolation from discrimination channels.

Vertical gaze angle: absolute height-in-scene information for the programming of prehension.

PubMed

Gardner, P L; Mon-Williams, M

2001-02-01

One possible source of information regarding the distance of a fixated target is provided by the height of the object within the visual scene. It is accepted that this cue can provide ordinal information, but generally it has been assumed that the nervous system cannot extract "absolute" information from height-in-scene. In order to use height-in-scene, the nervous system would need to be sensitive to ocular position with respect to the head and to head orientation with respect to the shoulders (i.e. vertical gaze angle or VGA). We used a perturbation technique to establish whether the nervous system uses vertical gaze angle as a distance cue. Vertical gaze angle was perturbed using ophthalmic prisms with the base oriented either up or down. In experiment 1, participants were required to carry out an open-loop pointing task whilst wearing: (1) no prisms; (2) a base-up prism; or (3) a base-down prism. In experiment 2, the participants reached to grasp an object under closed-loop viewing conditions whilst wearing: (1) no prisms; (2) a base-up prism; or (3) a base-down prism. Experiment 1 and 2 provided clear evidence that the human nervous system uses vertical gaze angle as a distance cue. It was found that the weighting attached to VGA decreased with increasing target distance. The weighting attached to VGA was also affected by the discrepancy between the height of the target, as specified by all other distance cues, and the height indicated by the initial estimate of the position of the supporting surface. We conclude by considering the use of height-in-scene information in the perception of surface slant and highlight some of the complexities that must be involved in the computation of environmental layout.

Two siblings with isolated GH deficiency due to loss-of-function mutation in the GHRHR gene: successful treatment with growth hormone despite late admission and severe growth retardation.

PubMed

Sıklar, Zeynep; Berberoğlu, Merih; Legendre, Maria; Amselem, Serge; Evliyaoğlu, Olcay; Hacıhamdioğlu, Bülent; Savaş Erdeve, Senay; Oçal, Gönül

2010-01-01

Patients with growth hormone releasing hormone receptor (GHRHR) mutations exhibit pronounced dwarfism and are phenotypically and biochemically indistinguishable from other forms of isolated growth hormone deficiency (IGHD). We presented here two siblings with clinical findings of IGHD due to a nonsense mutation in the GHRHR gene who reached their target height in spite of late GH treatment. Two female siblings were admitted to our clinic with severe short stature at the age of 13.8 (patient 1) and 14.8 years (patient 2). On admission, height in patient 1 was 107 cm (-8.6 SD) and 117 cm (-6.7 SD) in patient 2. Bone age was delayed in both patients (6 years and 9 years). Clinical and biochemical analyses revealed a diagnosis of complete IGHD (peak GH levels on stimulation test was 0.06 ng/mL in patient 1 and 0.16 ng/mL in patient 2). Patients were given recombinant human GH treatment. Genetic analysis of the GH and GHRHR genes revealed that both patientscarried the GHRHR gene mutation p.Glu72X (c.214 G>T) in exon 3 in homozygous (or hemizygous) state. After seven years of GH treatment, the patients reached a final height appropriate for their target height. Final height was 151 cm (-1.5 SD) in patient 1 and 153 cm (-1.2 SD) in patient 2. In conclusion, genetic analysis is indicated in IGHD patients with severe growth failure and a positive family history. In spite of the very late diagnosis in these two patients who presented with severe growth deficit due to homozygous loss-of-function mutations in GHRHR, their final heights reached the target height.

A rare variant in COL11A1 is strongly associated with adult height in Chinese Han population.

PubMed

Shen, Changbing; Zheng, Xiaodong; Gao, Jing; Zhu, Caihong; Ko, Randy; Tang, Xianfa; Yang, Chao; Dou, Jinfa; Lin, Yan; Cheng, Yuyan; Liu, Lu; Xu, Shuangjun; Chen, Gang; Zuo, Xianbo; Yin, Xianyong; Sun, Liangdan; Cui, Yong; Yang, Sen; Zhang, Xuejun; Zhou, Fusheng

2016-09-20

Human height is a highly heritable trait in which multiple genes are involved. Recent genome-wide association studies (GWASs) have identified that COL11A1 is an important susceptibility gene for human height. To determine whether the variants of COL11A1 are associated with adult and children height, we analyzed splicing and coding single-nucleotide variants across COL11A1 through exome-targeted sequencing and two validation stages with a total 20,426 Chinese Han samples. A total of 105 variants were identified by exome-targeted sequencing, of which 30 SNPs were located in coding region. The strongest association signal was Chr1_103380393 with P value of 4.8 × 10(-7). Chr1_103380393 also showed nominal significance in the validation stage (P = 1.21 × 10(-6)). Combined analysis of 16,738 samples strengthened the original association of chr1_103380393 with adult height (Pcombined = 3.1 × 10(-8)), with an increased height of 0.292sd (standard deviation) per G allele (95% CI: 0.19-0.40). There was no evidence (P = 0.843) showing that chr1_103380393 altered child height in 3688 child samples. Only the group of 12-15 years showed slight significance with P value of 0.0258. This study firstly shows that genetic variants of COL11A1 contribute to adult height in Chinese Han population but not to children height, which expand our knowledge of the genetic factors underlying height variation and the biological regulation of human height. Copyright © 2016 Institute of Genetics and Developmental Biology, Chinese Academy of Sciences, and Genetics Society of China. All rights reserved.

Final height in elite male artistic gymnasts.

PubMed

Georgopoulos, Neoklis A; Theodoropoulou, Anastasia; Roupas, Nikolaos D; Armeni, Anastasia K; Koukkou, Eftychia; Leglise, Michel; Markou, Kostas B

2012-01-01

Elite male artistic gymnasts (AG) are exposed to high levels of physical and psychological stress during adolescence and experience a significant late maturation in both linear growth and pubertal development. The aim of the present study was to determine the impact of intensive physical training on the adult final height in elite male AG. This study is unique in character, as all variables were measured on the field of competition. The study was prospective and longitudinal; however, the current analysis of data is cross-sectional. Data from 86 elite male AG were obtained during the gymnastics competitions of European and World Championships. Clinical evaluation included height and weight measurements, as well as assessment of pubic hair and genital development according to Tanner's stages of pubertal development. The laboratory investigation included determination of skeletal maturation. All athletes completed a questionnaire that included questions on personal (onset and intensity of training, number of competitions per year) and family data (paternal and maternal heights). Male AG were below the 50th percentile for both final height and weight. Elite male AG had final height standard deviation score (SDS) lower than their genetic predisposition. Final height SDS was correlated positively with target height SDS (r = 0.430, p < 0.001) and weight SDS (r = 0.477, p < 0.001) and negatively to the intensity of training (r = -0.252, p = 0.022). The main factors influencing final height, by multiple regression analysis were weight SDS (p < 0.001) and target height SDS (p = 0.003). In elite maleAG, final height falls short of genetic predisposition, still well within normal limits. Considering medical and psychological risks in general, and based on the results of this research project, the International Federation of Gymnastics has increased the age limit for participants in international gymnastics competitions by 1 year.

Intelligent person identification system using stereo camera-based height and stride estimation

NASA Astrophysics Data System (ADS)

Ko, Jung-Hwan; Jang, Jae-Hun; Kim, Eun-Soo

2005-05-01

In this paper, a stereo camera-based intelligent person identification system is suggested. In the proposed method, face area of the moving target person is extracted from the left image of the input steros image pair by using a threshold value of YCbCr color model and by carrying out correlation between the face area segmented from this threshold value of YCbCr color model and the right input image, the location coordinates of the target face can be acquired, and then these values are used to control the pan/tilt system through the modified PID-based recursive controller. Also, by using the geometric parameters between the target face and the stereo camera system, the vertical distance between the target and stereo camera system can be calculated through a triangulation method. Using this calculated vertical distance and the angles of the pan and tilt, the target's real position data in the world space can be acquired and from them its height and stride values can be finally extracted. Some experiments with video images for 16 moving persons show that a person could be identified with these extracted height and stride parameters.

Preparation of silicon target material by adding Al-B master alloy in directional solidification

NASA Astrophysics Data System (ADS)

Li, Pengting; Wang, Kai; Ren, Shiqiang; Jiang, Dachuan; Tan, Yi

2017-03-01

The silicon target material was prepared by adding Al-6B master alloy in directional solidification. The microstructure was characterized and the resistivity was studied in this work. The results showed that the purity of the silicon target material was more than 99.999% (5N). The resistivity was ranges from 0.002 to 0.030 Ω·cm along the ingot height. It was revealed that the particles of AlB2 in Al-6B master alloy would react spontaneously and generate clusters of [B] and [Al] in molten silicon at 1723 K. After directional solidification, the content of B and Al were increasing gradually with the increase of solidified fraction. The measured values of B were in good agreement with the curve of the Scheil equation below 80% of the ingot height. The mean concentration of B was about 17.20 ppmw and the mean concentration of Al was about 8.07 ppmw after directional solidification. The measured values of Al were fitting well with the curve of values which the effective segregation coefficient was 0.00378. It was observed that B co-doped Al in directional solidification polysilicon could regulate resistivity mutually. This work provides the theoretical basis and technical support for industrial production of the silicon target material.

Early growth hormone treatment start in childhood growth hormone deficiency improves near adult height: analysis from NordiNet® International Outcome Study.

PubMed

Polak, Michel; Blair, Jo; Kotnik, Primoz; Pournara, Effie; Pedersen, Birgitte Tønnes; Rohrer, Tilman R

2017-11-01

To investigate the effect of age at growth hormone (GH) treatment start on near adult height (NAH) in children with isolated GH deficiency (GHD). NordiNet® International Outcome Study (IOS) (Nbib960128), a non-interventional, multicentre study, evaluates the long-term effectiveness and safety of Norditropin® (somatropin) (Novo Nordisk A/S) in the real-life clinical setting. Patients ( n  = 172) treated to NAH (height at ≥18 years, or height velocity <2 cm/year at ≥16 (boys) or ≥15 (girls) years) were grouped by age (years) at treatment start (early (girls, <8; boys, <9), intermediate (girls, 8-10; boys, 9-11) or late (girls, >10; boys, >11)) and GHD severity (<3 ng/mL or 3 to ≤10 ng/mL). Multiple regression analysis was used to evaluate the effect of age at treatment start (as a categorical and continuous variable) on NAH standard deviation score (SDS). Age at treatment start had a marked effect on NAH SDS; NAH SDS achieved by patients starting treatment early ( n  = 40 (boys, 70.0%); least squares mean (standard error) -0.76 (0.14)) exceeded that achieved by those starting later (intermediate, n  = 42 (boys, 57.1%); -1.14 (0.15); late, n  = 90 (boys, 68.9%); -1.21 (0.10)). Multiple regression analysis showed a significant association between NAH SDS and age at treatment start ( P  < 0.0242), baseline height SDS (HSDS) ( P  < 0.0001), target HSDS ( P  < 0.0001), and GHD severity ( P  = 0.0012). Most (78.5%) patients achieved a normal NAH irrespective of age at treatment start. Early initiation of GH treatment in children with isolated GHD improves their chance of achieving their genetic height potential. © 2017 The authors.

Measurement and Comparison of Taekwondo and Yongmudo Turning Kick Impact Force for Two Target Heights

PubMed Central

O’Sullivan, David; Chung, Chulsoo; Lee, Kikwang; Kim, Euihwan; Kang, Sungchul; Kim, Taewhan; Shin, Insik

2009-01-01

The primary purpose of this research was to compare the impact characteristics of Taekwondo (TKD) and Yongmudo (YMD) player’s turning kick according to the target height. 5 highly skilled YMD and 5 TKD players participated in this study. To measure the impact force, two accelerometers were fixed to a PVC pipe in a sandbag. Each participant performed 10 turning kicks trunk and face height in random order. Only the trial with the most accurate (most central impact) measurement was used in the statistical analysis (p < 0.05).There was a significant difference for impact force according to the target height approximately 6400 ± 898 N, 6393 ± 1382 N for the mid section and 5419 ± 659 N, 5475 ± 1293 N for the high section of TKD and YMD groups, but not between groups. The swing phase for the TKD group was significantly shorter than the YMD group’s. The TKD groups’ recovery phase of the trunk height turning kick was significantly shorter. There was a difference in the players’ center of mass (COM) movement as the TKD players’ moved significantly more forward, suggesting that the TKD players tended to slide towards the target during the execution of the kick. In conclusion, as the turning kick was performed quicker by the TKD players with a similar impact force and more forward motion, it is evaluated to be a better technique of turning kicking. Key Points This impact force measuring device had a significantly smaller standard deviation then that of impact force measuring devices. There was a significant difference between the impact forces according to the height approximately 6400 ± 898N, 6393 ± 1382N for the mid section and 5419 ± 659N, 5475 ± 1293N for the high section of TKD and YMD groups. The turning kick was performed quicker by the TKD players with a similar impact force and more forward motion. PMID:24474880

A multi-sensor lidar, multi-spectral and multi-angular approach for mapping canopy height in boreal forest regions

USGS Publications Warehouse

Selkowitz, David J.; Green, Gordon; Peterson, Birgit E.; Wylie, Bruce

2012-01-01

Spatially explicit representations of vegetation canopy height over large regions are necessary for a wide variety of inventory, monitoring, and modeling activities. Although airborne lidar data has been successfully used to develop vegetation canopy height maps in many regions, for vast, sparsely populated regions such as the boreal forest biome, airborne lidar is not widely available. An alternative approach to canopy height mapping in areas where airborne lidar data is limited is to use spaceborne lidar measurements in combination with multi-angular and multi-spectral remote sensing data to produce comprehensive canopy height maps for the entire region. This study uses spaceborne lidar data from the Geosciences Laser Altimeter System (GLAS) as training data for regression tree models that incorporate multi-angular and multi-spectral data from the Multi-Angle Imaging Spectroradiometer (MISR) and the Moderate Resolution Imaging SpectroRadiometer (MODIS) to map vegetation canopy height across a 1,300,000 km2 swath of boreal forest in Interior Alaska. Results are compared to in situ height measurements as well as airborne lidar data. Although many of the GLAS-derived canopy height estimates are inaccurate, applying a series of filters incorporating both data associated with the GLAS shots as well as ancillary data such as land cover can identify the majority of height estimates with significant errors, resulting in a filtered dataset with much higher accuracy. Results from the regression tree models indicate that late winter MISR imagery acquired under snow-covered conditions is effective for mapping canopy heights ranging from 5 to 15 m, which includes the vast majority of forests in the region. It appears that neither MISR nor MODIS imagery acquired during the growing season is effective for canopy height mapping, although including summer multi-spectral MODIS data along with winter MISR imagery does appear to provide a slight increase in the accuracy of resulting height maps. The finding that winter, snow-covered MISR imagery can be used to map canopy height is important because clear sky days are nearly three times as common during the late winter period as during the growing season. The increased odds of acquiring cloud-free imagery during the target acquisition period make regularly updated forest height inventories for Interior Alaska much more feasible. A major advantage of the GLAS–MISR–MODIS canopy height mapping methodology described here is that this approach uses only data that is freely available worldwide, making the approach potentially applicable across the entire circumpolar boreal forest region.

Effect of growth hormone treatment on the adult height of children with chronic renal failure. German Study Group for Growth Hormone Treatment in Chronic Renal Failure.

PubMed

Haffner, D; Schaefer, F; Nissel, R; Wühl, E; Tönshoff, B; Mehls, O

2000-09-28

Growth hormone treatment stimulates growth in short children with chronic renal failure. However, the extent to which this therapy increases final adult height is not known. We followed 38 initially prepubertal children with chronic renal failure treated with growth hormone for a mean of 5.3 years until they reached their final adult height. The mean (+/-SD) age at the start of treatment was 10.4+/-2.2 years, the mean bone age was 7.1+/-2.3 years, and the mean height was 3.1+/-1.2 SD below normal. Fifty matched children with chronic renal failure who were not treated with growth hormone served as controls. The children treated with growth hormone had sustained catch-up growth, whereas the control children had progressive growth failure. The mean final height of the growth hormone-treated children was 165 cm for boys and 156 cm for girls. The mean final adult height of the growth hormone-treated children was 1.6+/-1.2 SD below normal, which was 1.4 SD above their standardized height at base line (P< 0.001). In contrast, the final height of the untreated children (2.1+/-1.2 SD below normal) was 0.6 SD below their standardized height at base line (P<0.001). Although prepubertal bone maturation was accelerated in growth hormone-treated children, treatment was not associated with a shortening of the pubertal growth spurt. The total height gain was positively associated with the initial target-height deficit and the duration of growth hormone therapy and was negatively associated with the percentage of the observation period spent receiving dialysis treatment. Long-term growth hormone treatment of children with chronic renal failure induces persistent catch-up growth, and the majority of patients achieve normal adult height.

Characterization of relief printing

NASA Astrophysics Data System (ADS)

Liu, Xing; Chen, Lin; Ortiz-Segovia, Maria-Valezzka; Ferwerda, James; Allebach, Jan

2014-03-01

Relief printing technology developed by Océ allows the superposition of several layers of colorant on different types of media which creates a variation of the surface height defined by the input to the printer. Evaluating the reproduction accuracy of distinct surface characteristics is of great importance to the application of the relief printing system. Therefore, it is necessary to develop quality metrics to evaluate the relief process. In this paper, we focus on the third dimension of relief printing, i.e. height information. To achieve this goal, we define metrics and develop models that aim to evaluate relief prints in two aspects: overall fidelity and surface finish. To characterize the overall fidelity, three metrics are calculated: Modulation Transfer Function (MTF), difference and root-mean-squared error (RMSE) between the input height map and scanned height map, and print surface angle accuracy. For the surface finish property, we measure the surface roughness, generate surface normal maps and develop a light reflection model that serves as a simulation of the differences between ideal prints and real prints that may be perceived by human observers. Three sets of test targets are designed and printed by the Océ relief printer prototypes for the calculation of the above metrics: (i) twisted target, (ii) sinusoidal wave target, and (iii) ramp target. The results provide quantitative evaluations of the printing quality in the third dimension, and demonstrate that the height of relief prints is reproduced accurately with respect to the input design. The factors that affect the printing quality include: printing direction, frequency and amplitude of the input signal, shape of relief prints. Besides the above factors, there are two additional aspects that influence the viewing experience of relief prints: lighting condition and viewing angle.

Laboratory experiments of crater formation on ice-rock mixture targets

NASA Astrophysics Data System (ADS)

Hiraoka, K.; Arakawa, M.; Yoshikawa, K.; Nakamura, A. M.

Surfaces of ice-rock mixture are common among planetary bodies in outer solar system, such as the satellites of the giant planets, comet nuclei, and so on. In order to study the effect of the presence of volatiles in crater formation on these bodies, we performed impact experiments using a two-stage light-gas gun and a gas gun at Hokkaido University. The targets were ice-rock mixtures (diameter = 10 or 30cm, height = 5cm) with 0 wt.% to 50 wt.% rock. Projectiles were ice cylinders (diameter = 15mm, height = 10mm) or corn-shaped nylon ones and the impact velocities were varied from about 300m/s to 3500m/s. We will show an anti-correlation between the crater volume and the rock content, and will make a comparison with previous works (Lange and Ahrens 1982; Koschny and Grun 2001). Ejecta size and velocity measured on high-speed video images will be presented and will be discussed by a comparison with a spallation model (Melosh 1984).

Holistic metrology qualification extension and its application to characterize overlay targets with asymmetric effects

NASA Astrophysics Data System (ADS)

Dos Santos Ferreira, Olavio; Sadat Gousheh, Reza; Visser, Bart; Lie, Kenrick; Teuwen, Rachel; Izikson, Pavel; Grzela, Grzegorz; Mokaberi, Babak; Zhou, Steve; Smith, Justin; Husain, Danish; Mandoy, Ram S.; Olvera, Raul

2018-03-01

Ever increasing need for tighter on-product overlay (OPO), as well as enhanced accuracy in overlay metrology and methodology, is driving semiconductor industry's technologists to innovate new approaches to OPO measurements. In case of High Volume Manufacturing (HVM) fabs, it is often critical to strive for both accuracy and robustness. Robustness, in particular, can be challenging in metrology since overlay targets can be impacted by proximity of other structures next to the overlay target (asymmetric effects), as well as symmetric stack changes such as photoresist height variations. Both symmetric and asymmetric contributors have impact on robustness. Furthermore, tweaking or optimizing wafer processing parameters for maximum yield may have an adverse effect on physical target integrity. As a result, measuring and monitoring physical changes or process abnormalities/artefacts in terms of new Key Performance Indicators (KPIs) is crucial for the end goal of minimizing true in-die overlay of the integrated circuits (ICs). IC manufacturing fabs often relied on CD-SEM in the past to capture true in-die overlay. Due to destructive and intrusive nature of CD-SEMs on certain materials, it's desirable to characterize asymmetry effects for overlay targets via inline KPIs utilizing YieldStar (YS) metrology tools. These KPIs can also be integrated as part of (μDBO) target evaluation and selection for final recipe flow. In this publication, the Holistic Metrology Qualification (HMQ) flow was extended to account for process induced (asymmetric) effects such as Grating Imbalance (GI) and Bottom Grating Asymmetry (BGA). Local GI typically contributes to the intrafield OPO whereas BGA typically impacts the interfield OPO, predominantly at the wafer edge. Stack height variations highly impact overlay metrology accuracy, in particular in case of multi-layer LithoEtch Litho-Etch (LELE) overlay control scheme. Introducing a GI impact on overlay (in nm) KPI check quantifies the grating imbalance impact on overlay, whereas optimizing for accuracy using self-reference captures the bottom grating asymmetry effect. Measuring BGA after each process step before exposure of the top grating helps to identify which specific step introduces the asymmetry in the bottom grating. By evaluating this set of KPI's to a BEOL LELE overlay scheme, we can enhance robustness of recipe selection and target selection. Furthermore, these KPIs can be utilized to highlight process and equipment abnormalities. In this work, we also quantified OPO results with a self-contained methodology called Triangle Method. This method can be utilized for LELE layers with a common target and reference. This allows validating general μDBO accuracy, hence reducing the need for CD-SEM verification.

Flexible nonlinear estimates of the association between height and mental ability in early life.

PubMed

Murasko, Jason E

2014-01-01

To estimate associations between early-life mental ability and height/height-growth in contemporary US children. Structured additive regression models are used to flexibly estimate the associations between height and mental ability at approximately 24 months of age. The sample is taken from the Early Childhood Longitudinal Study-Birth Cohort, a national study whose target population was children born in the US during 2001. A nonlinear association is indicated between height and mental ability at approximately 24 months of age. There is an increasing association between height and mental ability below the mean value of height, but a flat association thereafter. Annualized growth shows the same nonlinear association to ability when controlling for baseline length at 9 months. Restricted growth at lower values of the height distribution is associated with lower measured mental ability in contemporary US children during the first years of life. Copyright © 2013 Wiley Periodicals, Inc.

Target-adaptive polarimetric synthetic aperture radar target discrimination using maximum average correlation height filters.

PubMed

Sadjadi, Firooz A; Mahalanobis, Abhijit

2006-05-01

We report the development of a technique for adaptive selection of polarization ellipse tilt and ellipticity angles such that the target separation from clutter is maximized. From the radar scattering matrix [S] and its complex components, in phase and quadrature phase, the elements of the Mueller matrix are obtained. Then, by means of polarization synthesis, the radar cross section of the radar scatters are obtained at different transmitting and receiving polarization states. By designing a maximum average correlation height filter, we derive a target versus clutter distance measure as a function of four transmit and receive polarization state angles. The results of applying this method on real synthetic aperture radar imagery indicate a set of four transmit and receive angles that lead to maximum target versus clutter discrimination. These optimum angles are different for different targets. Hence, by adaptive control of the state of polarization of polarimetric radar, one can noticeably improve the discrimination of targets from clutter.

Jumping to (fatal) conclusions? An analysis of video film on a social networking web site of recreational jumping from height into water.

PubMed

Moran, Kevin

2014-01-01

In high-income countries, death as a consequence of recreational jumping into water from height has not been well investigated partly because it traditionally has been a covert activity within youth culture. An observational study of video recordings posted on the YouTube web site was used to gather data on the nature of jumping activity in New Zealand and Australia. An analytical framework was developed to identify site- participant- social characteristics (10 variables) and online feedback (4 variables). Of the 389 videos recorded in New Zealand (n = 210) and Australia (n = 179), 929 jumpers were observed, and rivers were the most frequently reported site of jumping activity (New Zealand 47%; Australia 35%). One fifth (20%) of the jumps in New Zealand and one third (33%) in Australia were from heights estimated to be more than 12 m. The YouTube website portraying jumps from height were visited almost half a million times (495,686 hits). Ways of reducing recreational jumping risk via targeted education interventions may be best directed at young male adults. Use of social network sites to foster safe behaviours may be an effective way to educate young people of the inherent risks of jumping from height into water.

Effect of advanced nanowire-based targets in nanosecond laser-matter interaction (invited)

NASA Astrophysics Data System (ADS)

Lanzalone, G.; Altana, C.; Mascali, D.; Muoio, A.; Malferrari, L.; Odorici, F.; Malandrino, G.; Tudisco, S.

2016-02-01

An experimental campaign aiming to investigate the effects of innovative nanostructured targets based on Ag nanowires on laser energy absorption in the ns time domain has been carried out at the Laser Energy for Nuclear Science laboratory of INFN-LNS in Catania. The tested targets were realized at INFN-Bologna by anodizing aluminium sheets in order to obtain layers of porous Al2O3 of different thicknesses, on which nanowires of various metals are grown by electro-deposition with different heights. Targets were then irradiated by using a Nd:YAG laser at different pumping energies. Advanced diagnostic tools were used for characterizing the plasma plume and ion production. As compared with targets of pure Al, a huge enhancement (of almost two order of magnitude) of the X-ray flux emitted by the plasma has been observed when using the nanostructured targets, with a corresponding decrease of the "optical range" signal, pointing out that the energetic content of the laser produced plasma was remarkably increased. This analysis was furthermore confirmed from time-of-flight spectra.

Effect of advanced nanowire-based targets in nanosecond laser-matter interaction (invited).

PubMed

Lanzalone, G; Altana, C; Mascali, D; Muoio, A; Malferrari, L; Odorici, F; Malandrino, G; Tudisco, S

2016-02-01

An experimental campaign aiming to investigate the effects of innovative nanostructured targets based on Ag nanowires on laser energy absorption in the ns time domain has been carried out at the Laser Energy for Nuclear Science laboratory of INFN-LNS in Catania. The tested targets were realized at INFN-Bologna by anodizing aluminium sheets in order to obtain layers of porous Al2O3 of different thicknesses, on which nanowires of various metals are grown by electro-deposition with different heights. Targets were then irradiated by using a Nd:YAG laser at different pumping energies. Advanced diagnostic tools were used for characterizing the plasma plume and ion production. As compared with targets of pure Al, a huge enhancement (of almost two order of magnitude) of the X-ray flux emitted by the plasma has been observed when using the nanostructured targets, with a corresponding decrease of the "optical range" signal, pointing out that the energetic content of the laser produced plasma was remarkably increased. This analysis was furthermore confirmed from time-of-flight spectra.

Effect of advanced nanowire-based targets in nanosecond laser-matter interaction (invited)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lanzalone, G., E-mail: Gaetano.Lanzalone@ct.infn.it; Università degli Studi di Enna “Kore,” Via delle Olimpiadi, 94100 Enna; Altana, C.

2016-02-15

An experimental campaign aiming to investigate the effects of innovative nanostructured targets based on Ag nanowires on laser energy absorption in the ns time domain has been carried out at the Laser Energy for Nuclear Science laboratory of INFN-LNS in Catania. The tested targets were realized at INFN-Bologna by anodizing aluminium sheets in order to obtain layers of porous Al{sub 2}O{sub 3} of different thicknesses, on which nanowires of various metals are grown by electro-deposition with different heights. Targets were then irradiated by using a Nd:YAG laser at different pumping energies. Advanced diagnostic tools were used for characterizing the plasmamore » plume and ion production. As compared with targets of pure Al, a huge enhancement (of almost two order of magnitude) of the X-ray flux emitted by the plasma has been observed when using the nanostructured targets, with a corresponding decrease of the “optical range” signal, pointing out that the energetic content of the laser produced plasma was remarkably increased. This analysis was furthermore confirmed from time-of-flight spectra.« less

Methylphenidate and the response to growth hormone treatment in short children born small for gestational age.

PubMed

Renes, Judith S; de Ridder, Maria A J; Breukhoven, Petra E; Lem, Annemieke J; Hokken-Koelega, Anita C S

2012-01-01

Growth hormone (GH) treatment has become a frequently applied growth promoting therapy in short children born small for gestational age (SGA). Children born SGA have a higher risk of developing attention deficit hyperactivity disorder (ADHD). Treatment of ADHD with methylphenidate (MP) has greatly increased in recent years, therefore more children are being treated with GH and MP simultaneously. Some studies have found an association between MP treatment and growth deceleration, but data are contradictory. To explore the effects of MP treatment on growth in GH-treated short SGA children Anthropometric measurements were performed in 78 GH-treated short SGA children (mean age 10.6 yr), 39 of whom were also treated with MP (SGA-GH/MP). The SGA-GH/MP group was compared to 39 SGA-GH treated subjects. They were matched for sex, age and height at start of GH, height SDS at start of MP treatment and target height SDS. Serum insulin-like growth factor-I (IGF-I) and IGF binding protein-3 (IGFBP-3) levels were yearly determined. Growth, serum IGF-I and IGFBP-3 levels during the first three years of treatment were analyzed using repeated measures regression analysis. The SGA-GH/MP group had a lower height gain during the first 3 years than the SGA-GH subjects, only significant between 6 and 12 months of MP treatment. After 3 years of MP treatment, the height gain was 0.2 SDS (± 0.1 SD) lower in the SGA-GH/MP group (P = 0.17). Adult height was not significantly different between the SGA-GH/MP and SGA-GH group (-1.9 SDS and -1.9 SDS respectively, P = 0.46). Moreover, during the first 3 years of MP treatment IGF-I and IGFBP-3 measurements were similar in both groups. MP has some negative effect on growth during the first years in short SGA children treated with GH, but adult height is not affected.

Reduced signal crosstalk multi neurotransmitter image sensor by microhole array structure

NASA Astrophysics Data System (ADS)

Ogaeri, Yuta; Lee, You-Na; Mitsudome, Masato; Iwata, Tatsuya; Takahashi, Kazuhiro; Sawada, Kazuaki

2018-06-01

A microhole array structure combined with an enzyme immobilization method using magnetic beads can enhance the target discernment capability of a multi neurotransmitter image sensor. Here we report the fabrication and evaluation of the H+-diffusion-preventing capability of the sensor with the array structure. The structure with an SU-8 photoresist has holes with a size of 24.5 × 31.6 µm2. Sensors were prepared with the array structure of three different heights: 0, 15, and 60 µm. When the sensor has the structure of 60 µm height, 48% reduced output voltage is measured at a H+-sensitive null pixel that is located 75 µm from the acetylcholinesterase (AChE)-immobilized pixel, which is the starting point of H+ diffusion. The suppressed H+ immigration is shown in a two-dimensional (2D) image in real time. The sensor parameters, such as height of the array structure and measuring time, are optimized experimentally. The sensor is expected to effectively distinguish various neurotransmitters in biological samples.

Fusion barrier characteristics of actinides

NASA Astrophysics Data System (ADS)

Manjunatha, H. C.; Sridhar, K. N.

2018-03-01

We have studied fusion barrier characteristics of actinide compound nuclei with atomic number range 89 ≤ Z ≤ 103 for all projectile target combinations. After the calculation of fusion barrier heights and positions, we have searched for their parameterization. We have achieved the empirical formula for fusion barrier heights (VB), positions (RB), curvature of the inverted parabola (ħω) of actinide compound nuclei with atomic number range 89 ≤ Z ≤ 103 for all projectile target combinations (6

Variation in Anthropometric Status and Growth Failure in Low- and Middle-Income Countries.

PubMed

Mejía-Guevara, Iván; Corsi, Daniel J; Perkins, Jessica M; Kim, Rockli; Subramanian, S V

2018-02-22

Addressing anthropometric failure in low- and middle-income countries can have 2 targets of inference: addressing differences between individuals within populations (W pop ) or differences between populations (B pop ). We present a multilevel framework to apply both targets of inference simultaneously and quantify the extent to which variation in anthropometric status and growth failure is reflective of undernourished children or undernourished populations. Cross-sectional data originated from the Demographic and Health Surveys program, covering children under age 5 from 57 countries surveyed between 2001 and 2015. A majority of variation in child anthropometric status and growth failure was attributable to W pop -associated differences, accounting for 89%, 83%, and 85% of the variability in z scores for height for age, weight for age, and weight for height. B pop -associated differences (communities, regions, and countries combined) were associated with 11%, 17%, and 15% of the variation in height-for-age z score, weight-for-age z score, and weight-for-height z score. Prevalence of anthropometric failure was closely correlated with mean levels of height and weight. Approximately 1% of W pop variability, compared with 30% to 50% of the B pop variability, was explained by mean values of maternal correlates of anthropometric status and failure. Although there is greater explanatory power B pop , this varied because of modifiability of what constitutes population. Our results suggest that universal strategies to prevent future anthropometric failure in populations combined with targeted strategies to address both the impending and existing burden among children are needed. Copyright © 2018 by the American Academy of Pediatrics.

Growth and Adult Height in Patients with Crohn's Disease Treated with Anti-Tumor Necrosis Factor α Antibodies.

PubMed

Bamberger, Sarah; Martinez Vinson, Christine; Mohamed, Damir; Viala, Jérôme; Carel, Jean-Claude; Hugot, Jean-Pierre; Simon, Dominique

2016-01-01

Inflammation contributes to growth failure associated with inflammatory bowel diseases. Anti-TNFα therapy induces sustained remission and short-term improvements in height velocity and/or height standard deviation score (H-SDS) patients with Crohn's disease. The purpose of this study was to evaluate growth and adult height in patients with Crohn's disease taking maintenance infliximab or adalimumab therapy.This university-hospital based retrospective study included 61 patients, with a median follow-up of 2.6 years (2.0; 3.3). 38 patients (62%) reached their adult height. H-SDS was collected at diagnosis and together with disease activity markers (Harvey-Bradshaw Index, albumin, and C-reactive protein) at treatment initiation (baseline), and follow-up completion. Wilcoxon's signed-rank test was chosen for comparisons. Median H-SDS decreased from diagnosis to baseline (-0.08 [-0.73; +0.77] to -0.94 [-1.44; +0.11], p<0.0001) and then increased to follow-up completion (-0.63 [-1.08; 0.49], p = 0.003 versus baseline), concomitantly with an improvement in disease activity. Median adult H-SDS was within the normal range (-0.72 [-1.25; +0.42]) but did not differ from baseline H-SDS and was significantly lower than the target H-SDS (-0.09 [-0.67; +0.42], p = 0.01). Only 2 (6%) males had adult heights significantly below their target heights (10.5 and -13.5 cm [-1.75 and -2.25 SD]). In conclusion, anti-tumor necrosis factor α (TNF) therapy prevented loss of height without fully restoring the genetic growth potential in this group of patients with CD. Earlier treatment initiation might improve growth outcomes in these patients.

Attaining genetic height potential: Analysis of height outcomes from the ANSWER Program in children treated with growth hormone over 5 years.

PubMed

Ross, Judith L; Lee, Peter A; Gut, Robert; Germak, John

2015-12-01

This study aimed to assess attainment of genetic height potential after long-term growth hormone (GH) treatment in GH-naïve children diagnosed with isolated growth hormone deficiency (IGHD), multiple pituitary hormone deficiency (MPHD), born small for gestational age (SGA), or idiopathic short stature (ISS) enrolled in the American Norditropin® Web-enabled Research (ANSWER) Program. Children with IGHD (n=2884), MPHD (n=200), SGA (n=481), or ISS (n=733) with baseline height standard deviation score (HSDS)≤-2 were assessed over 5 years of GH treatment for mean HSDS, change in HSDS (ΔHSDS), and corrected HSDS (HSDS-target HSDS). Mean HSDS and corrected HSDS significantly increased to close to target height across all diagnostic groups after 5 years of GH treatment (P<0.0001). ∆HSDS at year 5 increased for all groups (IGHD: 1.8; MPHD: 2.1; SGA: 1.8; ISS: 1.6). Among patients who continued GH for 5 years, mean insulin-like growth factor-I (IGF-I) SDS increased to within normal range across all groups. Body mass index (BMI) SDS remained relatively stable in all diagnostic groups. Bone age (BA) increased, and the mean BA to chronological age (BA/CA) ratio reached or approached 1 across diagnostic groups over 5 years of GH treatment. Long-term GH therapy resulted in a significant increase in mean HSDS and corrected HSDS from baseline values in all diagnostic groups. The observed increase in mean corrected HSDS is consistent with growth that approached the patients' genetic height potential, although complete height gains will be evaluated at the attainment of final height. Copyright © 2015 Elsevier Ltd. All rights reserved.

Determinants of acute mortality of Hippodamia convergens (Coleoptera: Coccinellidae) to ultra-low volume permethrin used for mosquito management

PubMed Central

Preftakes, Collin J.; Bodin, Jennifer L.; Brown, Christopher R.; Piccolomini, Alyssa M.; Schleier, Jerome J.

2016-01-01

There are relatively few experimental studies and risk assessments of the effects on non-target insects from ultra-low volume (ULV) insecticides used for management of adult mosquitoes. Therefore, we evaluated factors that may influence the ability of an insect to intercept the insecticide at the time of application by using Hippodamia convergens (Coleoptera: Coccinellidae) in field bioassay experiments in 2011 and 2015. Treatment factors included different distances, two cage heights (ground-level and 1.5 m above ground) to the point of the application, and covered vs. uncovered cage faces (2015 only). Insecticides used included a water-based formulation (Aqua-Reslin®) and an oil-based formulation (Permanone® 30-30) of permethrin. Cage height was highly significant both years, with much less acute (i.e., short-term exposure) mortality at ground-level compared with 1.5 m. In 2011, acute mortality was less at ground-level (mean = 3.2%, median = 0%) compared to 1.5 m (mean = 85.2%, median = 100%). Cage type also was highly significant, with less mortality in covered cages compared to uncovered cages. Mortality by cage height and cage type was as follows: ground level, covered cage (mean = 2.8%, median = 0.1%); ground level, uncovered cage (mean = 41.9%, median = 9.6%); 1.5 m, covered cage (mean = 6.8%, median = 0%); 1.5 m, uncovered cage (mean = 83.7%, median = 100%). Results suggest that acute mortality to non-target insects may vary considerably based on their height and their ability to directly intercept the insecticide as the aerosol passes through the area being sprayed. PMID:27366655

3D range-gated super-resolution imaging based on stereo matching for moving platforms and targets

NASA Astrophysics Data System (ADS)

Sun, Liang; Wang, Xinwei; Zhou, Yan

2017-11-01

3D range-gated superresolution imaging is a novel 3D reconstruction technique for target detection and recognition with good real-time performance. However, for moving targets or platforms such as airborne, shipborne, remote operated vehicle and autonomous vehicle, 3D reconstruction has a large error or failure. In order to overcome this drawback, we propose a method of stereo matching for 3D range-gated superresolution reconstruction algorithm. In experiment, the target is a doll of Mario with a height of 38cm at the location of 34m, and we obtain two successive frame images of the Mario. To confirm our method is effective, we transform the original images with translation, rotation, scale and perspective, respectively. The experimental result shows that our method has a good result of 3D reconstruction for moving targets or platforms.

The growth hormone cascade: progress and long-term results of growth hormone treatment in growth hormone deficiency.

PubMed

Grumbach, M M; Bin-Abbas, B S; Kaplan, S L

1998-01-01

The growth hormone (GH) cascade and the remarkable advances over the past four decades in our knowledge of its components are considered. It is now over 40 years since human pituitary GH (pit-hGH) was purified and the first GH-deficient patient, a 17-year-old male, was successfully treated with pit-hGH. However, the shortage of pit-hGH limited its use and the dose, the biopotency of preparations varied, strict criteria of GH deficiency (GHD) were used for patient selection including peak plasma immunoreactive GH levels after provocative stimuli of <3.5-5 ng/ml, treatment was not infrequently interrupted, the mean age for initiating treatment was often late in childhood (12-13 years) and the growth deficiency severe (height -4 to -6 SDS), and finally pit-hGH therapy was often discontinued when girls attained a height of 5' and boys 5'5". Nonetheless, the effects of pit-hGH were dramatic; the final height SDS increased in isolated GHD to about -2 SDS in boys and -2.5 to -3.0 SDS in girls, and in multiple pituitary hormone deficiencies to between -1 and -2 SDS. Between 1962 and 1985 when the Creutzfeldt-Jakob disease crisis struck, the number of GH-deficient patients treated with pit-hGH increased from about 150 to over 3,000. The advent of biosynthetic GH (rhGH) and its availability to treat large numbers of idiopathic GH-deficient children (the minimum prevalence rate of which in the USA and UK is between 1 in 3,400 and 4,000) dramatically changed this picture in 1985. It is estimated that more than 60,000 patients have been or are now on treatment. With rhGH treatment the attained mean adult height SDS is now about -1.0, and in our experience with the treatment of patients under 4 years of age, final height may exceed the target height. It is now recognized that (a) the replacement dose of rhGH ranges from 0.175 to 0.35 mg/kg/week and should be individualized; (b) dividing this dose into 6 or 7 daily subcutaneous injections is more effective than giving the same total dose in three weekly portions, and (c) final height correlates significantly with pretreatment chronologic age, height SDS and predicted adult height, duration of therapy, birth length, in some studies height SDS and age at start of puberty, weight, and serum GHBP (an indicator of GH receptor mass). Early recognition of GHD is essential for an optimal height outcome. rhGH treatment should not be delayed in children with documented GHD; the greater the height deficit, the lower the probability that target height will be reached. GHD needs to be detected earlier in children with organic hypopituitarism whether due to a developmental defect, neoplasm, radiation, head trauma, or a CNS infection. Early rhGH therapy in neonatal hypopituitarism has resulted in excellent growth responses. As the height prognosis in isolated GHD is not as good (especially in girls) as in GHD associated with gonadotropin deficiency, the use of LHRH agonists to delay puberty or potent aromatase inhibitors to delay skeletal maturation should be considered in selected patients with isolated GHD. When the growth response to rhGH is less than predicted, one must consider: (a) poor compliance; (b) improper preparation of rhGH for administration or faulty injection techniques; (c) the timing of administration; (d) the dose of glucocorticoid in the ACTH-deficient patient; (e) occult hypothyroidism; (f) inadequate nutrition; (g) a chronic illness; (h) neutralizing antibodies to rhGH, and (i) the wrong diagnosis. The major cause of mortality (unrelated to Creutzfeldt-Jakob disease or a CNS neoplasm) is adrenal crisis and hypoglycemia in children with both GH and ACTH deficiency. Major adverse effects of rhGH treatment in children are uncommon and include idiopathic intracranial hypertension, slipped capital femoral epiphysis, and acute pancreatitis. The rhGH is not an added risk for leukemia in the US and Europe in the absence of coexisting risk factors, nor is there a higher risk of recurrence of b

Quantitative trait locus analysis of heterosis for plant height and ear height in an elite maize hybrid zhengdan 958 by design III.

PubMed

Li, Hongjian; Yang, Qingsong; Fan, Nannan; Zhang, Ming; Zhai, Huijie; Ni, Zhongfu; Zhang, Yirong

2017-04-17

Plant height (PH) and ear height (EH) are two important agronomic traits in maize selection breeding. F 1 hybrid exhibit significant heterosis for PH and EH as compared to their parental inbred lines. To understand the genetic basis of heterosis controlling PH and EH, we conducted quantitative trait locus (QTL) analysis using a recombinant inbreed line (RIL) based design III population derived from the elite maize hybrid Zhengdan 958 in five environments. A total of 14 environmentally stable QTLs were identified, and the number of QTLs for Z 1 and Z 2 populations was six and eight, respectively. Notably, all the eight environmentally stable QTLs for Z 2 were characterized by overdominance effect (OD), suggesting that overdominant QTLs were the most important contributors to heterosis for PH and EH. Furthermore, 14 environmentally stable QTLs were anchored on six genomic regions, among which four are trait-specific QTLs, suggesting that the genetic basis for PH and EH is partially different. Additionally, qPH.A-1.3, modifying about 10 centimeters of PH, was further validated in backcross populations. The genetic basis for PH and EH is partially different, and overdominant QTLs are important factors for heterosis of PH and EH. A major QTL qPH.A-1.3 may be a desired target for genetic improvement of maize plant height.

Revitalizing Nuclear Operations in the Joint Environment

DTIC Science & Technology

2014-02-01

height of the Cold War, US schol - ars and joint operational planners were working simultaneously on weapons development and operational art to employ...leadership’s large-target- category withholds thought necessary to maintain stability in a strategic crisis. The inclusion of nuclear effects and...escalation. The inclusion of these points in tomorrow’s doctrine as well as an intellec- tual discussion on the topic will inform Joint Staff planners

Effects of body height, notebook computer size, and workstation height on recommended adjustments for proper work posture when operating a notebook computer.

PubMed

Nanthavanij, Suebsak; Jalil, Sakib; Ammarapala, Veeris

2008-12-01

Factors which are likely to affect recommended workstation and notebook computer (NBC) adjustments to obtain ergonomic work posture during NBC operation are investigated. They are: (1) body height, (2) NBC size, and (3) workstation height (i.e., seat and work surface heights). Six recommended adjustments which are evaluated include: (1) footrest height, (2) seat support height, (3) NBC base support height, (4) distance between the user's body and NBC (or user-NBC distance), (5) tilt angle of NBC base, and (6) screen angle. It is found that body height has a significant effect on footrest height and user-NBC distance while NBC size has a significant effect on user-NBC distance, tilt angle of NBC base, and screen angle. Workstation height, on the other hand, does not show any effect on the six recommended adjustments. However, the results suggest that there are interactions between body height and NBC size, and between body height and workstation height when evaluating their effects on footrest height, tilt angle of NBC base, and screen angle.

Kidney transplantation fails to provide adequate growth in children with chronic kidney disease born small for gestational age.

PubMed

Franke, Doris; Steffens, Rena; Thomas, Lena; Pavičić, Leo; Ahlenstiel, Thurid; Pape, Lars; Gellermann, Jutta; Müller, Dominik; Querfeld, Uwe; Haffner, Dieter; Živičnjak, Miroslav

2017-03-01

Children with chronic kidney disease are frequently born small for gestational age (SGA) and prone to disproportionately short stature. It is unclear how SGA affects growth after kidney transplantation (KTx). Linear growth (height, sitting height, and leg length) was prospectively investigated in a cohort of 322 pediatric KTx recipients, with a mean follow-up of 4.9 years. Sitting height index (ratio of sitting height to total body height) was used to assess body proportions. Predictors of growth outcome in KTx patients with (n = 94) and without (n = 228) an SGA history were evaluated by the use of linear mixed-effects models. Mean z-scores for all linear body dimensions were lower in SGA compared with non-SGA patients (p < 0.001). SGA patients presented with higher target height deficit and degree of body disproportion (p < 0.001). The latter was mainly due to reduced leg growth during childhood. Pubertal trunk growth was diminished in SGA patients, and the pubertal growth spurt of legs was delayed in both groups, resulting in further impairment of adult height, which was more frequently reduced in SGA than in non-SGA patients (50 % vs 18 %, p < 0.001). Use of growth hormone treatment in the pre-transplant period, preemptive KTx, transplant function, and control of metabolic acidosis were the only potentially modifiable correlates of post-transplant growth in SGA groups. By contrast, living related KTx, steroid exposure, and degree of anemia proved to be correlates in non-SGA only. In children born SGA, growth outcome after KTx is significantly more impaired and affected by different clinical parameters compared with non-SGA patients.

Combination growth hormone and gonadotropin releasing hormone analog therapy in 11beta-hydroxylase deficiency.

PubMed

Bajpai, Anurag; Kabra, Madhulika; Menon, P S N

2006-06-01

Diagnosis of 11beta-hydroxylase deficiency was made in a boy at the age of 2 1/2 years on the basis of peripheral precocious puberty, growth acceleration (height standard deviation score +4.4) with advanced skeletal maturation (bone age 8.4 years) and elevated deoxycortisol levels. Glucocorticoid supplementation led to normalization of blood pressure but was associated with progression to central precocious puberty and increase in bone age resulting in decrease in predicted adult height to 133.7 cm (target height 163 cm). The child was started on GnRH analog (triptorelin 3.75 mg every 28 days), which led to improvement in predicted adult height by 3.1 cm over 15 months. Addition of growth hormone (0.1 IU/kg/day) resulted in improvement in predicted adult height (151 cm) and height deficit (12 cm) over the next 3.6 years. Final height (151 cm) exceeded predicted height at the initiation of GnRH analog treatment by 17.3 cm. This report suggests that combination GH and GnRH analog treatment may be useful in improving height outcome in children with 11beta-hydroxylase deficiency and compromised final height.

Cavitational kyphoplasty: a new technique for reducing the rates of cement extravasation through targeted low-pressure cement injection.

PubMed

Mattei, Tobias A

2017-06-01

Previous studies have demonstrated lower rates of cement extravasation when comparing balloon kyphoplasty with vertebroplasty, an effect attributed to the low-pressure injection. However, in patients with isolated endplate fractures, balloon kyphoplasty may lead to further endplate damage and increased risks of intradiscal extravasation. The author provides a stepwise description of a new technique called cavitational kyphoplasty that allows targeted low-pressure cement injection without the necessity of balloon inflation. The new technique of cavitational kyphoplasty has been shown to be specially useful in patients with isolated endplate fractures without significant loss of the vertebral body height.

The Effect of Recombinant Growth Hormone Treatment in Children with Idiopathic Short Stature and Low Insulin-Like Growth Factor-1 Levels.

PubMed

Şıklar, Zeynep; Kocaay, Pınar; Çamtosun, Emine; İsakoca, Mehmet; Hacıhamdioğlu, Bülent; Savaş Erdeve, Şenay; Berberoğlu, Merih

2015-12-01

Idiopathic short stature (ISS) constitutes a heterogeneous group of short stature which is not associated with an endocrine or other identifiable cause. Some ISS patients may have varying degrees of insulin-like growth factor-1 (IGF-1) deficiency. Recombinant growth hormone (rGH) treatment has been used by some authors with variable results. Reports on long-term rGH treatment are limited. In this study, 21 slowly growing, non-GH-deficient ISS children who received rGH treatment for 3.62±0.92 years were evaluated at the end of a 5.42±1.67-year follow-up period. The study group included patients with low IGF-1 levels who also responded well to an IGF generation test. The patients were divided into two groups as good responders [height increment >1 standard deviation (SD)] and poor responders (height increment <1 SD) at the end of the follow-up period. The height of the patients improved from -3.16±0.46 SD score (SDS) to -1.9±0.66 SDS. At the end of the follow-up period, mean height SDS was -1.72. Eleven of the patients showed a good response to treatment. Clinical parameters were essentially similar in the good responders and the poor responders groups. A female preponderance was noted in the good responders group. rGH treatment can safely be used in ISS children. Long-term GH treatment will ameliorate the height deficit and almost 40% of patients may reach their target height.

Growth in Prepubertal Children With Cystic Fibrosis Treated With Ivacaftor

PubMed Central

Pace, Jesse; Niknian, Minoo; Higgins, Mark N.; Tarn, Valerie; Davis, Joy; Heltshe, Sonya L.; Rowe, Steven M.

2017-01-01

BACKGROUND AND OBJECTIVES: Cystic fibrosis (CF) is known for its impact on the lung and pancreas of individuals; however, impaired growth is also a common complication. We hypothesized that targeting the biological defect in the CF transmembrane conductance regulator (CFTR) protein may affect growth outcomes. METHODS: In this post hoc analysis, we assessed linear growth and weight in 83 children (aged 6–11 years) enrolled in 2 clinical trials, the longitudinal-observation GOAL study and the placebo-controlled ENVISION study, to evaluate the effects of ivacaftor, a CFTR potentiator. We calculated height and weight z scores and height and weight growth velocities (GVs). RESULTS: In ivacaftor-treated children in GOAL, height and weight z scores increased significantly from baseline to 6 months (increases of 0.1 [P < .05] and 0.26 [P < .0001], respectively); height GV increased significantly from 3 to 6 months (2.10-cm/year increase; P < .01). In ivacaftor-treated children in ENVISION, height and weight z scores increased significantly from baseline to 48 weeks (increases of 0.17 [P < .001] and 0.35 [P < .001], respectively). Height and weight GVs from baseline to 48 weeks were also significantly higher with ivacaftor than with placebo (differences of 1.08 cm/year [P < .05] and 3.11 kg/year [P < .001], respectively). CONCLUSIONS: Ivacaftor treatment in prepubescent children may help to address short stature and altered GV in children with CF; results from these analyses support the existence of an intrinsic defect in the growth of children with CF that may be ameliorated by CFTR modulation. PMID:28143919

Growth in Prepubertal Children With Cystic Fibrosis Treated With Ivacaftor.

PubMed

Stalvey, Michael S; Pace, Jesse; Niknian, Minoo; Higgins, Mark N; Tarn, Valerie; Davis, Joy; Heltshe, Sonya L; Rowe, Steven M

2017-02-01

Cystic fibrosis (CF) is known for its impact on the lung and pancreas of individuals; however, impaired growth is also a common complication. We hypothesized that targeting the biological defect in the CF transmembrane conductance regulator (CFTR) protein may affect growth outcomes. In this post hoc analysis, we assessed linear growth and weight in 83 children (aged 6-11 years) enrolled in 2 clinical trials, the longitudinal-observation GOAL study and the placebo-controlled ENVISION study, to evaluate the effects of ivacaftor, a CFTR potentiator. We calculated height and weight z scores and height and weight growth velocities (GVs). In ivacaftor-treated children in GOAL, height and weight z scores increased significantly from baseline to 6 months (increases of 0.1 [P < .05] and 0.26 [P < .0001], respectively); height GV increased significantly from 3 to 6 months (2.10-cm/year increase; P < .01). In ivacaftor-treated children in ENVISION, height and weight z scores increased significantly from baseline to 48 weeks (increases of 0.17 [P < .001] and 0.35 [P < .001], respectively). Height and weight GVs from baseline to 48 weeks were also significantly higher with ivacaftor than with placebo (differences of 1.08 cm/year [P < .05] and 3.11 kg/year [P < .001], respectively). Ivacaftor treatment in prepubescent children may help to address short stature and altered GV in children with CF; results from these analyses support the existence of an intrinsic defect in the growth of children with CF that may be ameliorated by CFTR modulation. Copyright © 2017 by the American Academy of Pediatrics.

Genetic and environmental contributions to weight, height, and BMI from birth to 19 years of age: an international study of over 12,000 twin pairs.

PubMed

Dubois, Lise; Ohm Kyvik, Kirsten; Girard, Manon; Tatone-Tokuda, Fabiola; Pérusse, Daniel; Hjelmborg, Jacob; Skytthe, Axel; Rasmussen, Finn; Wright, Margaret J; Lichtenstein, Paul; Martin, Nicholas G

2012-01-01

To examine the genetic and environmental influences on variances in weight, height, and BMI, from birth through 19 years of age, in boys and girls from three continents. Cross-sectional twin study. Data obtained from a total of 23 twin birth-cohorts from four countries: Canada, Sweden, Denmark, and Australia. Participants were Monozygotic (MZ) and dizygotic (DZ) (same- and opposite-sex) twin pairs with data available for both height and weight at a given age, from birth through 19 years of age. Approximately 24,036 children were included in the analyses. Heritability for body weight, height, and BMI was low at birth (between 6.4 and 8.7% for boys, and between 4.8 and 7.9% for girls) but increased over time, accounting for close to half or more of the variance in body weight and BMI after 5 months of age in both sexes. Common environmental influences on all body measures were high at birth (between 74.1-85.9% in all measures for boys, and between 74.2 and 87.3% in all measures for girls) and markedly reduced over time. For body height, the effect of the common environment remained significant for a longer period during early childhood (up through 12 years of age). Sex-limitation of genetic and shared environmental effects was observed. Genetics appear to play an increasingly important role in explaining the variation in weight, height, and BMI from early childhood to late adolescence, particularly in boys. Common environmental factors exert their strongest and most independent influence specifically in pre-adolescent years and more significantly in girls. These findings emphasize the need to target family and social environmental interventions in early childhood years, especially for females. As gene-environment correlation and interaction is likely, it is also necessary to identify the genetic variants that may predispose individuals to obesity.

Height Assessment in the Dutch-Origin Pediatric Cystic Fibrosis Population.

PubMed

Woestenenk, Janna W; Gulmans, Vincent A M; van der Ent, Cornelis K; Houwen, Roderick H J

2017-02-01

Height evaluation is an integral part of cystic fibrosis (CF) care. Height is compared with reference values by converting it to height-for-age (HFA) z scores. However, HFA z scores do not adjust for genetic potential (ie, target height [TH]), which could result in an incorrect estimation of the height. To evaluate the magnitude of this potential problem, we assessed the agreement between HFA and HFA-adjusted-for-TH (HFA/TH) z scores in 474 Dutch children with CF. In this study sample, HFA z scores were -0.07 (95% confidence interval, -0.02 to -0.12) lower than HFA/TH z scores. When HFA and HFA/TH z scores were subdivided into 4 categories (≥0, <0 and ≥-1, <-1 and ≥-2, and ≤-2), a moderate agreement was found. HFA z scores were classified lower than HFA/TH z scores in 21% of the measurements and higher in 15% of the measurements. In clinical routine, height evaluation based on HFA may result in underestimation or overestimation of height growth, which may induce inappropriate nutrition interventions.

Comparison of Radiofrequency-targeted Vertebral Augmentation With Balloon Kyphoplasty for the Treatment of Vertebral Compression Fractures: 2-Year Results.

PubMed

Bornemann, Rahel; Jansen, Tom R; Kabir, Koroush; Pennekamp, Peter H; Stüwe, Brit; Wirtz, Dieter C; Pflugmacher, Robert

2017-04-01

A retrospective study. The aim of this study was the evaluation of the safety and effectiveness of radiofrequency-targeted vertebral augmentation (RF-TVA) in comparison with balloon kyphoplasty (BK) for the treatment of acute painful vertebral compression fractures (VCFs) on the basis of matched pairs. Vertebroplasty and BK are the common surgical interventions for the treatment of VCF. Both are effective and safe but pose some risks such as adjacent fractures and cement leakage. In 2009, RF-TVA was introduced as an innovative augmentation procedure for the treatment of VCF. A total of 192 patients (116 female; 51-90 y) with VCF (n=303) at 1 to 3 levels were treated with RF-TVA or BK. Functionality (Oswestry Disability Index), pain (visual analogue scale), vertebral height (anterior, middle), and kyphotic angle were evaluated over a 2-year period (postoperatively, 3-4 d, 3, 6, 12, and 24 mo). In addition, operating time and occurrence of cement leakage were recorded. Pain and functionality were significantly improved after both treatments. In both groups, there was an increase in the vertebral height and a decrease in the kyphotic angle, which remained relatively consistent during 24 months. The incidence of cement leakage was 9.4% (n=9) in the RF-TVA group and 24.0% (n=25) in the BK group. The mean operating time with radiofrequency kyphoplasty was 25.9±9.9 minutes, and with balloon kyphoplasty 48.0±18.4 minutes. RF-TVA is a safe and effective procedure for the treatment of vertebral compression fractures when compared with BK. Improvement in pain and functional scores after RF-TVA are durable through 24 months postprocedure and remained better than those after BK at long-term follow-up. Operating time for RF-TVA is shorter and the risk of cement leakage is lower. Both procedures provided similar results in vertebral height restoration and reduction in the kyphotic angle.

SHOX haploinsufficiency and Leri-Weill dyschondrosteosis: prevalence and growth failure in relation to mutation, sex, and degree of wrist deformity.

PubMed

Binder, Gerhard; Renz, Alexandra; Martinez, Alicia; Keselman, Ana; Hesse, Volker; Riedl, Stefan W; Häusler, Gabriele; Fricke-Otto, Susanne; Frisch, Herwig; Heinrich, Juan Jorge; Ranke, Michael B

2004-09-01

SHOX mutations causing haploinsufficiency were reported in Leri-Weill dyschondrosteosis (LWD), which is characterized by mesomelic short stature and Madelung deformity of the wrists. The aim of this study was to determine the prevalence of SHOX mutations in LWD and to investigate the degree of growth failure in relation to mutation, sex, age of menarche, and wrist deformity. We studied 20 families with 24 affected children (18 females) and nine affected parents (seven females). All patients presented with bilateral Madelung deformity and shortening of the limbs. Height, sitting height, parental height, birth length, age of menarche, and presence of minor abnormalities were recorded. The degree of Madelung deformity was estimated by analysis of left hand radiographs. Microsatellite typing of the SHOX locus was used for detection of SHOX deletions and PCR direct sequencing for the detection of SHOX point mutations. In 14 of 20 families (70%), SHOX mutations were detected, with seven deletions (four de novo) and seven point mutations (one de novo). The latter included five missense mutations of the SHOX homeodomain, one nonsense mutation (E102X) truncating the whole homeodomain, and one point mutation (X293R) causing a C-terminal elongation of SHOX. Median age of the affected children was 13.4 yr (range, 6.1-18.3), mean height sd score (SDS) (sd in parentheses) was -2.85 (1.04), and mean sitting height/height ratio SDS was +3.06 (1.09). Mean birth length SDS was -0.59 (1.26). Growth failure occurred before school age. Height change during a median follow-up of 7.4 yr (range, 2.3-11.3) was insignificant with a mean change in height SDS of -0.10 (0.52). Mean height SDS of affected parents was -2.70 (0.85) vs. -0.91 (1.10) in unaffected parents. Height loss due to LWD was estimated calculating delta height defined by actual height SDS minus target height SDS of the unaffected parent(s). In the children, mean delta height SDS was -2.16 (1.06), the loss being greater in girls at -2.30 (1.02) than in boys at -1.72 (1.09) (P = 0.32). In patients with SHOX deletions, it was -2.14 (1.15) vs. -1.67 (0.73) for the SHOX point mutation group (P = 0.38). Mean delta height SDS was -2.26 (0.68) for the girls with early menarche (<12 yr) vs. -2.08 (0.91) for the other postmenarcheal girls (P = 0.72). Height loss in patients with radiologically severe wrist deformities in comparison with those having milder radiological signs was -2.81 (1.01) vs. -1.70 (1.04) (P = 0.03). GH treatment in five children during a median duration of 3.4 yr (range, 1.5-9.8 yr) with a median dosage of 0.23 mg/kg.wk (range, 0.14-0.25) resulted in a mean height SDS gain of +0.82 (0.34). In conclusion, SHOX defects were the main cause of LWD. Growth failure occurred during the first years of life with a mean height loss of 2.16 SDS whereas pubertal growth may only be mildly or not affected. Children with a severe degree of wrist deformity were significantly shorter than those with mild deformities. No statistically significant effects of type of mutation, age of menarche, or sex on height were observed. The effect of GH therapy varied between individuals and needs to be examined in controlled studies.

Measured parental height in Turner syndrome-a valuable but underused diagnostic tool.

PubMed

Ouarezki, Yasmine; Cizmecioglu, Filiz Mine; Mansour, Chourouk; Jones, Jeremy Huw; Gault, Emma Jane; Mason, Avril; Donaldson, Malcolm D C

2018-02-01

Early diagnosis of Turner syndrome (TS) is necessary to facilitate appropriate management, including growth promotion. Not all girls with TS have overt short stature, and comparison with parental height (Ht) is needed for appropriate evaluation. We examined both the prevalence and diagnostic sensitivity of measured parental Ht in a dedicated TS clinic between 1989 and 2013. Lower end of parental target range (LTR) was calculated as mid-parental Ht (correction factor 12.5 cm minus 8.5 cm) and converted to standard deviation scores (SDS) using UK 1990 data, then compared with patient Ht SDS at first accurate measurement aged > 1 year. Information was available in 172 girls of whom 142 (82.6%) were short at first measurement. However, both parents had been measured in only 94 girls (54.6%). In 92 of these girls age at measurement was 6.93 ± 3.9 years, Ht SDS vs LTR SDS - 2.63 ± 0.94 vs - 1.77 ± 0.81 (p < 0.001), Ht SDS < LTR in 78/92 (85%). Eleven of the remaining 14 girls were < 5 years, while karyotype was 45,X/46,XX in 2 and 45,X/47,XXX in 3. This study confirms the sensitivity of evaluating height status against parental height but shows that the latter is not being consistently measured. What is Known: • Girls with Turner syndrome are short in relation to parental heights, with untreated final height approximately 20 cm below female population mean. • Measured parental height is more accurate than reported height. What is New: • In a dedicated Turner clinic, there was 85% sensitivity when comparing patient height standard deviation score at first accurate measurement beyond 1 year of age with the lower end of the parental target range standard deviation. • However, measured height in both parents had been recorded in only 54.6% of the Turner girls attending the clinic. This indicates the need to improve the quality of growth assessment in tertiary care.

Joint-level energetics differentiate isoinertial from speed-power resistance training-a Bayesian analysis.

PubMed

Liew, Bernard X W; Drovandi, Christopher C; Clifford, Samuel; Keogh, Justin W L; Morris, Susan; Netto, Kevin

2018-01-01

There is convincing evidence for the benefits of resistance training on vertical jump improvements, but little evidence to guide optimal training prescription. The inability to detect small between modality effects may partially reflect the use of ANOVA statistics. This study represents the results of a sub-study from a larger project investigating the effects of two resistance training methods on load carriage running energetics. Bayesian statistics were used to compare the effectiveness of isoinertial resistance against speed-power training to change countermovement jump (CMJ) and squat jump (SJ) height, and joint energetics. Active adults were randomly allocated to either a six-week isoinertial ( n  = 16; calf raises, leg press, and lunge), or a speed-power training program ( n  = 14; countermovement jumps, hopping, with hip flexor training to target pre-swing running energetics). Primary outcome variables included jump height and joint power. Bayesian mixed modelling and Functional Data Analysis were used, where significance was determined by a non-zero crossing of the 95% Bayesian Credible Interval (CrI). The gain in CMJ height after isoinertial training was 1.95 cm (95% CrI [0.85-3.04] cm) greater than the gain after speed-power training, but the gain in SJ height was similar between groups. In the CMJ, isoinertial training produced a larger increase in power absorption at the hip by a mean 0.018% (equivalent to 35 W) (95% CrI [0.007-0.03]), knee by 0.014% (equivalent to 27 W) (95% CrI [0.006-0.02]) and foot by 0.011% (equivalent to 21 W) (95% CrI [0.005-0.02]) compared to speed-power training. Short-term isoinertial training improved CMJ height more than speed-power training. The principle adaptive difference between training modalities was at the level of hip, knee and foot power absorption.

Standing adult human phantoms based on 10th, 50th and 90th mass and height percentiles of male and female Caucasian populations

NASA Astrophysics Data System (ADS)

Cassola, V. F.; Milian, F. M.; Kramer, R.; de Oliveira Lira, C. A. B.; Khoury, H. J.

2011-07-01

Computational anthropomorphic human phantoms are useful tools developed for the calculation of absorbed or equivalent dose to radiosensitive organs and tissues of the human body. The problem is, however, that, strictly speaking, the results can be applied only to a person who has the same anatomy as the phantom, while for a person with different body mass and/or standing height the data could be wrong. In order to improve this situation for many areas in radiological protection, this study developed 18 anthropometric standing adult human phantoms, nine models per gender, as a function of the 10th, 50th and 90th mass and height percentiles of Caucasian populations. The anthropometric target parameters for body mass, standing height and other body measures were extracted from PeopleSize, a well-known software package used in the area of ergonomics. The phantoms were developed based on the assumption of a constant body-mass index for a given mass percentile and for different heights. For a given height, increase or decrease of body mass was considered to reflect mainly the change of subcutaneous adipose tissue mass, i.e. that organ masses were not changed. Organ mass scaling as a function of height was based on information extracted from autopsy data. The methods used here were compared with those used in other studies, anatomically as well as dosimetrically. For external exposure, the results show that equivalent dose decreases with increasing body mass for organs and tissues located below the subcutaneous adipose tissue layer, such as liver, colon, stomach, etc, while for organs located at the surface, such as breasts, testes and skin, the equivalent dose increases or remains constant with increasing body mass due to weak attenuation and more scatter radiation caused by the increasing adipose tissue mass. Changes of standing height have little influence on the equivalent dose to organs and tissues from external exposure. Specific absorbed fractions (SAFs) have also been calculated with the 18 anthropometric phantoms. The results show that SAFs decrease with increasing height and increase with increasing body mass. The calculated data suggest that changes of the body mass may have a significant effect on equivalent doses, primarily for external exposure to organs and tissue located below the adipose tissue layer, while for superficial organs, for changes of height and for internal exposures the effects on equivalent dose are small to moderate.

Mechanical analysis of the roundhouse kick according to height and distance in taekwondo.

PubMed

Estevan, I; Falco, C

2013-12-01

Competition regulation in taekwondo has experienced several changes during the last few years, for example, kicks to the head score more points than kicks to the chest. In addition, some external factors such as the height of target and execution distance seem to affect the kick performance. The aim of this study was to analyse selected biomechanical parameters (impact force, reaction time, and execution time) according to the height and execution distance in two different male groups (experts (n = 12) and novices (n = 21)). Athletes kicked twice from every execution distance (short, normal and long) and towards two different heights of target (chest and head) in a random order. Novices kicked to the head with a longer reaction time than to the chest (p < 0.05) but experts were able to kick with similar performance for both heights. From short and normal distances experts kicked with similar performance; whereas from the normal distance novices had longer reaction and execution time than from the short distance (p < 0.05). In conclusion, in counterattacking situations, experts should perform the roundhouse kick to the head instead of to the chest, because it produces better scores with similar performance; whereas novice athletes should avoid kicking to the head because they are not able to kick with similar performance. Moreover, it is recommended that during counterattacks higher-level taekwondo athletes should intend to kick from normal distances.

MECHANICAL ANALYSIS OF THE ROUNDHOUSE KICK ACCORDING TO HEIGHT AND DISTANCE IN TAEKWONDO

PubMed Central

Falco, C.

2013-01-01

Competition regulation in taekwondo has experienced several changes during the last few years, for example, kicks to the head score more points than kicks to the chest. In addition, some external factors such as the height of target and execution distance seem to affect the kick performance. The aim of this study was to analyse selected biomechanical parameters (impact force, reaction time, and execution time) according to the height and execution distance in two different male groups (experts (n = 12) and novices (n = 21)). Athletes kicked twice from every execution distance (short, normal and long) and towards two different heights of target (chest and head) in a random order. Novices kicked to the head with a longer reaction time than to the chest (p < 0.05) but experts were able to kick with similar performance for both heights. From short and normal distances experts kicked with similar performance; whereas from the normal distance novices had longer reaction and execution time than from the short distance (p < 0.05). In conclusion, in counterattacking situations, experts should perform the roundhouse kick to the head instead of to the chest, because it produces better scores with similar performance; whereas novice athletes should avoid kicking to the head because they are not able to kick with similar performance. Moreover, it is recommended that during counterattacks higher-level taekwondo athletes should intend to kick from normal distances. PMID:24744499

The target plant concept-a history and brief overview

Treesearch

Thomas D. Landis

2011-01-01

The target plant concept originated with morphological classification of conifer nursery stock in the 1930s, and the concept was enhanced through physiological research and seedling testing towards the end of the century. Morphological grading standards such as shoot height, stem diameter, and root mass are the most common use of the target plant concept, and some...

Report on the Radar/PIREP Cloud Top Discrepancy Study

NASA Technical Reports Server (NTRS)

Wheeler, Mark M.

1997-01-01

This report documents the results of the Applied Meteorology Unit's (AMU) investigation of inconsistencies between pilot reported cloud top heights and weather radar indicated echo top heights (assumed to be cloud tops) as identified by the 45 Weather Squadron (45WS). The objective for this study is to document and understand the differences in echo top characteristics as displayed on both the WSR-88D and WSR-74C radars and cloud top heights reported by the contract weather aircraft in support of space launch operations at Cape Canaveral Air Station (CCAS), Florida. These inconsistencies are of operational concern since various Launch Commit Criteria (LCC) and Flight Rules (FR) in part describe safe and unsafe conditions as a function of cloud thickness. Some background radar information was presented. Scan strategies for the WSR-74C and WSR-88D were reviewed along with a description of normal radar beam propagation influenced by the Effective Earth Radius Model. Atmospheric conditions prior to and leading up to both launch operations were detailed. Through the analysis of rawinsonde and radar data, atmospheric refraction or bending of the radar beam was identified as the cause of the discrepancies between reported cloud top heights by the contract weather aircraft and those as identified by both radars. The atmospheric refraction caused the radar beam to be further bent toward the Earth than normal. This radar beam bending causes the radar target to be displayed erroneously, with higher cloud top heights and a very blocky or skewed appearance.

Plasma diagnosis as a tool for the determination of the parameters of electron beam evaporation and sources of ionization

NASA Astrophysics Data System (ADS)

Mukherjee, Jaya; Dileep Kumar, V.; Yadav, S. P.; Barnwal, Tripti A.; Dikshit, Biswaranjan

2016-07-01

The atomic vapor generated by electron beam heating is partially ionized due to atom-atom collisions (Saha ionization) and electron impact ionization, which depend upon the source temperature and area of evaporation as compared to the area of electron beam bombardment on the target. When electron beam evaporation is carried out by inserting the target inside an insulating liner to reduce conductive heat loss, it is expected that the area of evaporation becomes significantly more than the area of electron beam bombardment on the target, resulting in reduced electron impact ionization. To assess this effect and to quantify the parameters of evaporation, such as temperature and area of evaporation, we have carried out experiments using zirconium, tin and aluminum as a target. By measuring the ion content using a Langmuir probe, in addition to measuring the atomic vapor flux at a specific height, and by combining the experimental data with theoretical expressions, we have established a method for simultaneously inferring the source temperature, evaporation area and ion fraction. This assumes significance because the temperature cannot be reliably measured by an optical pyrometer due to the wavelength dependent source emissivity and reflectivity of thin film mirrors. In addition, it also cannot be inferred from only the atomic flux data at a certain height as the area of evaporation is unknown (it can be much more than the area of electron bombardment, especially when the target is placed in a liner). Finally, the reason for the lower observed electron temperatures of the plasma for all the three cases is found to be the energy loss due to electron impact excitation of the atomic vapor during its expansion from the source.

The relationship between the target effective site concentration of rocuronium and the degree of recovery from neuromuscular blockade in elderly patients

PubMed Central

Fan, Xiaochong; Ma, Minyu; Li, Zhisong; Gong, Shengkai; Zhang, Wei; Wen, Yuanyuan

2015-01-01

Objective: To study the relationship between the target effective site concentration (Ce) of rocuronium and the degree of recovery from neuromuscular blockade in elderly patients. Methods: 50 elderly patients (ASA grade II) scheduled for selective surgical procedure under general anaesthesia were randomly divided into two groups, A and B, with 25 cases in each group. The Ce of rocuronium for intubation was 3 μg·ml-1 in both groups, and the Ce during operation were 0.8 and 1.0 μg·ml-1 in group A and B, respectively. When target controlled infusion of rocuronium was stopped, without the administration of reversal agents for neuromuscular blockade, the relationship between Ce and the first twitch height (T1) was studied by regression analysis. Results: There was a significant linear relationship between Ce and T1, and there was no statistical difference in regression coefficient and interception between group A and B (P>0.05). Conclusion: The degree of recovery from neuromuscular blockade could be judged by the target effective site concentration of rocuronium at the time of reversal from neuromuscular blockade in the elderly patients. PMID:26629159

[Intrauterine growth restriction: endocrinological perspective. Update of the 2007 version (Arch Argent Pediatr 2007;105(1):71-73)].

PubMed

2017-06-01

Most children born with low weight or intrauterine growth restriction develop catch-up growth that allows them to reach a final height according to their genetic target height. However, in about 15% of children this growth is insufficient. In both, children who have adequate compensatory growth and therefore normal height and children who remain low in childhood, it is necessary to take into account that if puberty starts early, the final height could be compromised. Timely and appropriate intervention could improve it. Control of body weight is also important, as an excessive gain in childhood is associated with metabolic complications in adolescence and adult life. Sociedad Argentina de Pediatría.

Optimization of OT-MACH Filter Generation for Target Recognition

NASA Technical Reports Server (NTRS)

Johnson, Oliver C.; Edens, Weston; Lu, Thomas T.; Chao, Tien-Hsin

2009-01-01

An automatic Optimum Trade-off Maximum Average Correlation Height (OT-MACH) filter generator for use in a gray-scale optical correlator (GOC) has been developed for improved target detection at JPL. While the OT-MACH filter has been shown to be an optimal filter for target detection, actually solving for the optimum is too computationally intensive for multiple targets. Instead, an adaptive step gradient descent method was tested to iteratively optimize the three OT-MACH parameters, alpha, beta, and gamma. The feedback for the gradient descent method was a composite of the performance measures, correlation peak height and peak to side lobe ratio. The automated method generated and tested multiple filters in order to approach the optimal filter quicker and more reliably than the current manual method. Initial usage and testing has shown preliminary success at finding an approximation of the optimal filter, in terms of alpha, beta, gamma values. This corresponded to a substantial improvement in detection performance where the true positive rate increased for the same average false positives per image.

Height loss in elderly women is preceded by osteoporosis and is associated with digestive problems and urinary incontinence.

PubMed

Berecki-Gisolf, J; Spallek, M; Hockey, R; Dobson, A

2010-03-01

This study explores risk factors for height loss and consequences in terms of health and wellbeing, in older women. Osteoporosis, low body-mass index, being born in Europe and using medications for both sleep and anxiety were risk factors for height loss. Height loss was associated with digestive problems; excessive height loss was also associated with urinary stress-incontinence and a decline in self-rated health. Height loss is associated with osteoporosis, but little is known about its consequences. We aimed to examine the risk factors for height loss and the symptoms associated with height loss. Elderly participants of the Australian Longitudinal Study on Women's Health (aged 70-75 in 1996) who provided data on height at any two consecutive surveys (held in 1996, 1999, 2002, and 2005) were included (N = 9,852). A regression model was fitted with height loss as the outcome and sociodemographics, osteoporosis, and other risk factors as explanatory variables. Symptoms related to postural changes or raised intra-abdominal pressure were analyzed using height loss as an explanatory variable. Over 9 years, average height loss per year was -0.12% (95% confidence intervals [95% CI] = -0.13 to -0.12) of height at baseline. Height loss was greater among those with osteoporosis and low body mass index and those taking medications for sleep and anxiety. After adjusting for confounders, symptoms associated with height loss of > or =2% were heartburn/indigestion (odds ratio [OR] = 1.19, 95% CI = 1.01 to 1.40), constipation (OR = 1.18, 95% CI = 1.01 to 1.37), and urinary stress incontinence (OR = 1.20, 95% CI = 1.02 to 1.41). These findings highlight the importance of monitoring height among the elderly in general practice and targeting associated symptoms.

Estimating Elevation Angles From SAR Crosstalk

NASA Technical Reports Server (NTRS)

Freeman, Anthony

1994-01-01

Scheme for processing polarimetric synthetic-aperture-radar (SAR) image data yields estimates of elevation angles along radar beam to target resolution cells. By use of estimated elevation angles, measured distances along radar beam to targets (slant ranges), and measured altitude of aircraft carrying SAR equipment, one can estimate height of target terrain in each resolution cell. Monopulselike scheme yields low-resolution topographical data.

Effects of Stimulating Hip and Trunk Muscles on Seated Stability, Posture and Reach after Spinal Cord Injury

PubMed Central

Triolo, Ronald J.; Bailey, Stephanie Nogan; Miller, Michael E.; Lombardo, Lisa M.; Audu, Musa L.

2014-01-01

Objective To determine the stimulated strength of the paralyzed gluteal and paraspinal muscles and their effects on the seated function of individuals with paralysis. Design Case series with subjects acting as their own concurrent controls. Setting Hospital-based clinical biomechanics laboratory. Participants Eight users of implanted neuroprostheses for lower extremity function with low-cervical or thoracic level injuries. Interventions Dynamometry and digital motion capture both with and without stimulation to the hip and trunk muscles. Main Outcome Measure(s) Isometric trunk extension moment at 0, 15 and 30 degrees of flexion; seated stability in terms of simulated isokinetic rowing; pelvic tilt, shoulder height, loaded and unloaded bimanual reaching to different heights, and subjective ratings of difficulty during unsupported sitting. Results Stimulation produced significant increases in mean trunk extension moment (9.2±9.5Nm, p=0.0001) and rowing force (27.4±23.1N, p=0.0123) over baseline volitional values. Similarly, stimulation induced positive changes in average pelvic tilt (16.7±15.7deg) and shoulder height (2.2±2.5cm) during quiet sitting and bimanual reaching, and increased mean reach distance (5.5±6.6cm) over all subjects, target heights and loading conditions. Subjects consistently rated tasks with stimulation easier than voluntary effort alone. Conclusions In spite of considerable inter-subject variability, stabilizing the paralyzed trunk with electrical stimulation can positively impact seated posture, extend forward reach and allow exertion of larger forces on objects in the environment. PMID:23500182

47 CFR 80.763 - Effective antenna height.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the radiating...

47 CFR 80.763 - Effective antenna height.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the radiating...

47 CFR 80.763 - Effective antenna height.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the radiating...

47 CFR 80.763 - Effective antenna height.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the radiating...

47 CFR 80.763 - Effective antenna height.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Effective antenna height. 80.763 Section 80.763... MARITIME SERVICES Standards for Computing Public Coast Station VHF Coverage § 80.763 Effective antenna height. The effective height of the antenna is the vertical distance between the center of the radiating...

Control x-ray deformable mirrors with few measurements

NASA Astrophysics Data System (ADS)

Huang, Lei; Xue, Junpeng; Idir, Mourad

2016-09-01

After years of development from a concept to early experimental stage, X-ray Deformable Mirrors (XDMs) are used in many synchrotron/free-electron laser facilities as a standard x-ray optics tool. XDM is becoming an integral part of the present and future large x-ray and EUV projects and will be essential in exploiting the full potential of the new sources currently under construction. The main objective of using XDMs is to correct wavefront errors or to enable variable focus beam sizes at the sample. Due to the coupling among the N actuators of a DM, it is usually necessary to perform a calibration or training process to drive the DM into the target shape. Commonly, in order to optimize the actuators settings to minimize slope/height errors, an initial measurement need to be collected, with all actuators set to 0, and then either N or 2N measurements are necessary learn each actuator behavior sequentially. In total, it means that N+1 or 2N+1 scans are required to perform this learning process. When the actuators number N is important and the actuator response or the necessary metrology is slow then this learning process can be time consuming. In this work, we present a fast and accurate method to drive an x-ray active bimorph mirror to a target shape with only 3 or 4 measurements. Instead of sequentially measuring and calculating the influence functions of all actuators and then predicting the voltages needed for any desired shape, the metrology data are directly used to "guide" the mirror from its current status towards the particular target slope/height via iterative compensations. The feedback for the iteration process is the discrepancy in curvature calculated by using B-spline fitting of the measured height/slope data. In this paper, the feasibility of this simple and effective approach is demonstrated with experiments.

An Improved Aerial Target Localization Method with a Single Vector Sensor

PubMed Central

Zhao, Anbang; Bi, Xuejie; Hui, Juan; Zeng, Caigao; Ma, Lin

2017-01-01

This paper focuses on the problems encountered in the actual data processing with the use of the existing aerial target localization methods, analyzes the causes of the problems, and proposes an improved algorithm. Through the processing of the sea experiment data, it is found that the existing algorithms have higher requirements for the accuracy of the angle estimation. The improved algorithm reduces the requirements of the angle estimation accuracy and obtains the robust estimation results. The closest distance matching estimation algorithm and the horizontal distance estimation compensation algorithm are proposed. The smoothing effect of the data after being post-processed by using the forward and backward two-direction double-filtering method has been improved, thus the initial stage data can be filtered, so that the filtering results retain more useful information. In this paper, the aerial target height measurement methods are studied, the estimation results of the aerial target are given, so as to realize the three-dimensional localization of the aerial target and increase the understanding of the underwater platform to the aerial target, so that the underwater platform has better mobility and concealment. PMID:29135956

Monitoring urban subsidence based on SAR lnterferometric point target analysis

USGS Publications Warehouse

Zhang, Y.; Zhang, Jiahua; Gong, W.; Lu, Z.

2009-01-01

lnterferometric point target analysis (IPTA) is one of the latest developments in radar interferometric processing. It is achieved by analysis of the interferometric phases of some individual point targets, which are discrete and present temporarily stable backscattering characteristics, in long temporal series of interferometric SAR images. This paper analyzes the interferometric phase model of point targets, and then addresses two key issues within IPTA process. Firstly, a spatial searching method is proposed to unwrap the interferometric phase difference between two neighboring point targets. The height residual error and linear deformation rate of each point target can then be calculated, when a global reference point with known height correction and deformation history is chosen. Secondly, a spatial-temporal filtering scheme is proposed to further separate the atmosphere phase and nonlinear deformation phase from the residual interferometric phase. Finally, an experiment of the developed IPTA methodology is conducted over Suzhou urban area. Totally 38 ERS-1/2 SAR scenes are analyzed, and the deformation information over 3 546 point targets in the time span of 1992-2002 are generated. The IPTA-derived deformation shows very good agreement with the published result, which demonstrates that the IPTA technique can be developed into an operational tool to map the ground subsidence over urban area.

Effects of shape parameters on the attractiveness of a female body.

PubMed

Fan, J; Dai, W; Qian, X; Chau, K P; Liu, Q

2007-08-01

Various researchers have suggested that certain anthropometric ratios can be used to measure female body attractiveness, including the waist to hip ratio, Body Mass Index (BMI), and the body volume divided by the square of the height (Volume-Height Index). Based on a wide range of female subjects and virtual images of bodies with different ratios, Volume-Height Index was found to provide the best fit with female body attractiveness, and the effect of Volume-Height Index can be fitted with two half bell-shaped exponential curves with an optimal Volume-Height Index at 14.2 liter/m2. It is suggested that the general trend of the effect of Volume-Height Index may be culturally invariant, but the optimal value of Volume-Height Index may vary from culture to culture. In addition to Volume-Height Index, other body parameters or ratios which reflect body proportions and the traits of feminine characteristics had smaller but significant effects on female body attractiveness, and such effects were stronger at optimum Volume-Height Index.

The effect of step stool use and provider height on CPR quality during pediatric cardiac arrest: A simulation-based multicentre study.

PubMed

Cheng, Adam; Lin, Yiqun; Nadkarni, Vinay; Wan, Brandi; Duff, Jonathan; Brown, Linda; Bhanji, Farhan; Kessler, David; Tofil, Nancy; Hecker, Kent; Hunt, Elizabeth A

2018-01-01

We aimed to explore whether a) step stool use is associated with improved cardiopulmonary resuscitation (CPR) quality; b) provider adjusted height is associated with improved CPR quality; and if associations exist, c) determine whether just-in-time (JIT) CPR training and/or CPR visual feedback attenuates the effect of height and/or step stool use on CPR quality. We analysed data from a trial of simulated cardiac arrests with three study arms: No intervention; CPR visual feedback; and JIT CPR training. Step stool use was voluntary. We explored the association between 1) step stool use and CPR quality, and 2) provider adjusted height and CPR quality. Adjusted height was defined as provider height + 23 cm (if step stool was used). Below-average height participants were ≤ gender-specific average height; the remainder were above average height. We assessed for interaction between study arm and both adjusted height and step stool use. One hundred twenty-four subjects participated; 1,230 30-second epochs of CPR were analysed. Step stool use was associated with improved compression depth in below-average (female, p=0.007; male, p<0.001) and above-average (female, p=0.001; male, p<0.001) height providers. There is an association between adjusted height and compression depth (p<0.001). Visual feedback attenuated the effect of height (p=0.025) on compression depth; JIT training did not (p=0.918). Visual feedback and JIT training attenuated the effect of step stool use (p<0.001) on compression depth. Step stool use is associated with improved compression depth regardless of height. Increased provider height is associated with improved compression depth, with visual feedback attenuating the effects of height and step stool use.

Effect on adult height of pubertal growth hormone retesting and withdrawal of therapy in patients with previously diagnosed growth hormone deficiency.

PubMed

Zucchini, Stefano; Pirazzoli, Piero; Baronio, Federico; Gennari, Monia; Bal, Milva Orquidea; Balsamo, Antonio; Gualandi, Stefano; Cicognani, Alessandro

2006-11-01

GH replacement therapy in GH-deficient (GHD) patients is usually continued until adult height despite the fact that most of these subjects display a normal secretion when retested at the end of growth. Puberty is the most likely time for normalization of GH secretion. The objectives of this study are to establish the characteristics and the percentage of the subjects with isolated GHD who normalized secretion at puberty and to compare their statural outcomes with those of the subjects with persistent deficiency treated also after retesting. This was a prospective, nonrandomized, open-label study conducted in a university research hospital. Sixty-nine subjects (40 male, 29 female) with a diagnosis before puberty of isolated GHD by means of arginine and l-dopa tests were reevaluated with the same tests after at least 2 yr of therapy and after puberty onset. If GH peak at retesting was more than 10 microg/liter, therapy was withdrawn. Percentage and characteristics of normalized subjects at retesting, outcome of treatment in the subjects treated or untreated to adult height, and factors predictive of growth outcome were measured. At retesting, 44 subjects (63.7%) confirmed a GH peak less than 10 microg/liter (24 of 40 male and 20 of 29 female). Apart from a less delayed bone age at diagnosis in females, the subjects with confirmed GHD were not different at diagnosis from the other group for height deficit at diagnosis, first year growth response to GH, age and height at puberty onset, height, and IGF-I at retesting. Mean adult height was 165.1 +/- 4.5 cm in the male group treated until adult height vs. 164.0 +/- 3.4 cm in the group who suspended therapy at retesting. Mean adult height was 153.2 +/- 4.1 cm in the female group treated until adult height vs. 152.9 +/- 5.2 cm in the group that suspended therapy at retesting. As regards the parameters expressing the final outcome, the only difference was found in the mean increment adult height-target height sd score in favor of the male group treated until adult height. In both sexes, therapy duration and GH levels at diagnosis and at retesting were unrelated to adult height parameters and to height increments during the period of observation. One third of our GHD subjects diagnosed before puberty presented a normal secretion at puberty. The withdrawal of GH therapy in these subjects after retesting was not associated with a catch down growth, and they obtained an adult height similar to those obtained by the GHD subjects treated until adult height. It seems convenient, in subjects with nonsevere GHD, to retest GH secretion at midpuberty and to withdraw treatment for the subjects that are no longer deficient.

49 CFR 173.465 - Type A packaging tests.

Code of Federal Regulations, 2011 CFR

2011-10-01

... quarters of each rim from a height of 0.3 m (1 foot). (5) The target for the free drop test must be a flat... Transport Package mass Kilograms (pounds) Free drop distance Meters (Feet) 15,000 (33,000) Mass 0.3 (1) (2... section must be preceded by a free drop from a height of 0.3 m (1 foot) on each corner, or in the case of...

Is adaptation to perceived interocular differences in height explained by vertical fusional eye movements?

PubMed

Maier, Felix M; Schaeffel, Frank

2013-07-24

To find out whether adaptation to a vertical prism involves more than fusional vertical eye movements. Adaptation to a vertical base-up 3 prism diopter prism was measured in a custom-programmed Maddox test in nine visually normal emmetropic subjects (mean age 27.0 ± 2.8 years). Vertical eye movements were binocularly measured in six of the subjects with a custom-programmed binocular video eye tracker. In the Maddox test, some subjects adjusted the perceived height as expected from the power of the prism while others appeared to ignore the prism. After 15 minutes of adaptation, the interocular difference in perceived height was reduced by on average 51% (from 0.86°-0.44°). The larger the initially perceived difference in height in a subject, the larger the amplitude of adaptation was. Eye tracking showed that the prism generated divergent vertical eye movements of 1.2° on average, which was less than expected from its power. Differences in eye elevation were maintained as long as the prism was in place. Small angles of lateral head tilt generated large interocular differences in eye elevation, much larger than the effects introduced by the prism. Vertical differences in retinal image height were compensated by vertical fusional eye movements but some subjects responded poorly to a vertical prism in both experiments; fusional eye movements were generally too small to realign both foveae with the fixation target; and the prism adaptation in the Maddox test was fully explained by the changes in vertical eye position, suggesting that no further adaptational mechanism may be involved.

Relationships between explosive and maximal triple extensor muscle performance and vertical jump height.

PubMed

Chang, Eunwook; Norcross, Marc F; Johnson, Sam T; Kitagawa, Taichi; Hoffman, Mark

2015-02-01

The purpose of this study was to examine the relationships between maximum vertical jump height and (a) rate of torque development (RTD) calculated during 2 time intervals, 0-50 milliseconds (RTD50) and 0-200 milliseconds (RTD200) after torque onset and (b) peak torque (PT) for each of the triple extensor muscle groups. Thirty recreationally active individuals performed maximal isometric voluntary contractions (MVIC) of the hip, knee and ankle extensors, and a countermovement vertical jump. Rate of torque development was calculated from 0 to 50 (RTD50) and 0 to 200 (RTD200) milliseconds after the onset of joint torque. Peak torque was identified and defined as the maximum torque value during each MVIC trial. Greater vertical jump height was associated with greater knee and ankle extension RTD50, RTD200, and PT (p ≤ 0.05). However, hip extension RTD50, RTD200, and PT were not significantly related to maximal vertical jump height (p > 0.05). The results indicate that 47.6 and 32.5% of the variability in vertical jump height was explained by knee and ankle extensor RTD50, respectively. Knee and ankle extensor RTD50 also seemed to be more closely related to vertical jump performance than RTD200 (knee extensor: 28.1% and ankle extensor: 28.1%) and PT (knee extensor: 31.4% and ankle extensor: 13.7%). Overall, these results suggest that training specifically targeted to improve knee and ankle extension RTD, especially during the early phases of muscle contraction, may be effective for increasing maximal vertical jump performance.

Growth hormone therapy alone or in combination with gonadotropin-releasing hormone analog therapy to improve the height deficit in children with congenital adrenal hyperplasia.

PubMed

Quintos, J B; Vogiatzi, M G; Harbison, M D; New, M I

2001-04-01

Short stature in the adult patient with congenital adrenal hyperplasia (CAH) is commonly seen, even among patients in excellent adrenal control during childhood and puberty. In this study we examine the effect of GH therapy on height prediction in children with both CAH and compromised height prediction. Leuprolide acetate, a GnRH analog (GnRHa), was given to patients with evidence of early puberty. GH (n = 12) or the combination of GH and GnRHa (n = 8) was administered to 20 patients with CAH while they continued therapy with glucocorticoids. Each patient in the treatment group was matched according to age, sex, bone age, puberty, and type of CAH with another CAH patient treated only with glucocorticoid replacement. The match was made at the start of GH treatment. Of the 20 patients, 12 have completed 2 yr of therapy. After 1 yr of GH or combination GH and GnRHa therapy, the mean growth rate increased from 5 +/- 1.9 to 7.8 +/- 1.6 cm/yr vs. 5.4 +/- 1.7 to 5 +/- 2 cm/yr in the group not receiving GH (P < 0.0001). During the second year of treatment, the mean growth rate was 6 +/- 1.6 vs. 4.2 +/- 2.1 cm/yr in the group not receiving GH (P < 0.001). The height SD score for chronological age in the treatment group at the end of 1 and 2 yr of treatment improved significantly more than the nontreatment group (P < 0.01). A similar improvement in the height SD score for bone age was found in the treatment group after 1 (-1.4 +/- 0.9 vs. -1.7 +/- 0.9; P < 0.0001) and 2 yr of therapy (-0.67 +/- 0.68 vs. -1.7 +/- 1.2; P < 0.0004). The mean predicted adult height improved from 159 +/- 11 (baseline) to 170 +/- 7.5 cm (after 2 yr of therapy) closely approximating target height (173 +/- 8 cm). All patients continued the hydrocortisone treatment. In patients with CAH and compromised height prediction, treatment with GH or the combination of GH and GnRHa results in an improvement of growth rate and height prediction and a reduction in height deficit for bone age.

High Temperatures Health Monitoring of the Condensed Water Height in Steam Pipe Systems

NASA Technical Reports Server (NTRS)

Lih, Shyh-Shiuh; Bar-Cohen, Yoseph; Lee, Hyeong Jae; Badescu, Mircea; Bao, Xiaoqi; Sherrit, Stewart; Takano, Nobuyuki; Ostlund, Patrick; Blosiu, Julian

2013-01-01

Ultrasonic probes were designed, fabricated and tested for high temperature health monitoring system. The goal of this work was to develop the health monitoring system that can determine the height level of the condensed water through the pipe wall at high temperature up to 250 deg while accounting for the effects of surface perturbation. Among different ultrasonic probe designs, 2.25 MHz probes with air backed configuration provide satisfactory results in terms of sensitivity, receiving reflections from the target through the pipe wall. A series of tests were performed using the air-backed probes under irregular conditions, such as surface perturbation and surface disturbance at elevated temperature, to qualify the developed ultrasonic system. The results demonstrate that the fabricated air-backed probes combined with advanced signal processing techniques offer the capability of health monitoring of steam pipe under various operating conditions.

Effect of different professions' clothing on children's height perception.

PubMed

Rashidi, Mahmoud; Keshtkaran, Katayoun; Zabihidan, Sahar; Hosseinchari, Masoud; Pazhoohi, Farid

2012-11-01

Height is a biological factor that can affect how others perceive and behave toward an individual. Height is a biological factor that can affect how others perceive and behave toward an individual. Clothing, as a non-biological factor, can affect these perceptions of height. In this study weClothing, as a non-biological factor, can affect these perceptions of height. In this study we investigated the effect of different professions' clothing on children's perceptions of height. One investigated the effect of different professions' clothing on children's perceptions of height. One hundred and eighty primary school students participated in this study and estimated the height of an actor in the clothing of four different professions which differed in terms of prestige. The results of study showed that the difference between the perceived and actual height was larger when participants estimated the height of socially esteemed professions. Also there was no difference between girls' and boys' estimation of different professions' height. The implications of these findings are discussed.

Evaluation of seismic spatial interaction effects through an impact testing program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, B.D.; Driesen, G.E.

The consequences of non-seismically qualified objects falling and striking essential, seismically qualified objects is an analytically difficult problem to assess. Analytical solutions to impact problems are conservative and only available for simple situations. In a nuclear facility, the numerous ``sources`` and ``targets`` requiring evaluation often have complex geometric configurations, which makes calculations and computer modeling difficult. Few industry or regulatory rules are available for this specialized assessment. A drop test program was recently conducted to ``calibrate`` the judgment of seismic qualification engineers who perform interaction evaluations and to further develop seismic interaction criteria. Impact tests on varying combinations of sourcesmore » and targets were performed by dropping the sources from various heights onto targets that were connected to instruments. This paper summarizes the scope, test configurations, and some results of the drop test program. Force and acceleration time history data and general observations are presented on the ruggedness of various targets when subjected to impacts from different types of sources.« less

Evaluation of seismic spatial interaction effects through an impact testing program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, B.D.; Driesen, G.E.

The consequences of non-seismically qualified objects falling and striking essential, seismically qualified objects is an analytically difficult problem to assess. Analytical solutions to impact problems are conservative and only available for simple situations. In a nuclear facility, the numerous sources'' and targets'' requiring evaluation often have complex geometric configurations, which makes calculations and computer modeling difficult. Few industry or regulatory rules are available for this specialized assessment. A drop test program was recently conducted to calibrate'' the judgment of seismic qualification engineers who perform interaction evaluations and to further develop seismic interaction criteria. Impact tests on varying combinations of sourcesmore » and targets were performed by dropping the sources from various heights onto targets that were connected to instruments. This paper summarizes the scope, test configurations, and some results of the drop test program. Force and acceleration time history data and general observations are presented on the ruggedness of various targets when subjected to impacts from different types of sources.« less

A method to assess the situation of air combat based on the missile attack zone

NASA Astrophysics Data System (ADS)

Shi, Zhenqing; Liang, Xiao Long; Zhang, Jiaqiang; Liu, Liu

2018-04-01

Aiming at the question that we rarely consider the impact of target's attack zone in traditional situation assessment so that the assessment result is not comprehensive enough, a method that takes target's attack zone into account is presented. This paper has obtained the attack zone and the non-escape zone as the basis for quantitative analysis using the rapid simulation method and the air-to-air missile mathematical model. The situation of air combat is assessed by the ratio of the advantage function values of both sides, and the advantage function is constructed based on some influential factors such as height, speed, distance and angle. The simulation results have shown the effectiveness of this method.

Terrestrial 3D laser scanning to track the increase in canopy height of both monocot and dicot crop species under field conditions.

PubMed

Friedli, Michael; Kirchgessner, Norbert; Grieder, Christoph; Liebisch, Frank; Mannale, Michael; Walter, Achim

2016-01-01

Plant growth is a good indicator of crop performance and can be measured by different methods and on different spatial and temporal scales. In this study, we measured the canopy height growth of maize (Zea mays), soybean (Glycine max) and wheat (Triticum aestivum) under field conditions by terrestrial laser scanning (TLS). We tested the hypotheses whether such measurements are capable to elucidate (1) differences in architecture that exist between genotypes; (2) genotypic differences between canopy height growth during the season and (3) short-term growth fluctuations (within 24 h), which could e.g. indicate responses to rapidly fluctuating environmental conditions. The canopies were scanned with a commercially available 3D laser scanner and canopy height growth over time was analyzed with a novel and simple approach using spherical targets with fixed positions during the whole season. This way, a high precision of the measurement was obtained allowing for comparison of canopy parameters (e.g. canopy height growth) at subsequent time points. Three filtering approaches for canopy height calculation from TLS were evaluated and the most suitable approach was used for the subsequent analyses. For wheat, high coefficients of determination (R(2)) of the linear regression between manually measured and TLS-derived canopy height were achieved. The temporal resolution that can be achieved with our approach depends on the scanned crop. For maize, a temporal resolution of several hours can be achieved, whereas soybean is ideally scanned only once per day, after leaves have reached their most horizontal orientation. Additionally, we could show for maize that plant architectural traits are potentially detectable with our method. The TLS approach presented here allows for measuring canopy height growth of different crops under field conditions with a high temporal resolution, depending on crop species. This method will enable advances in automated phenotyping for breeding and precision agriculture applications. In future studies, the TLS method can be readily applied to detect the effects of plant stresses such as drought, limited nutrient availability or compacted soil on different genotypes or on spatial variance in fields.

Manifestations of Proprioception During Vertical Jumps to Specific Heights

PubMed Central

Struzik, Artur; Pietraszewski, Bogdan; Winiarski, Sławomir; Juras, Grzegorz; Rokita, Andrzej

2017-01-01

Abstract Artur, S, Bogdan, P, Kawczyński, A, Winiarski, S, Grzegorz, J, and Andrzej, R. Manifestations of proprioception during vertical jumps to specific heights. J Strength Cond Res 31(6): 1694–1701, 2017—Jumping and proprioception are important abilities in many sports. The efficiency of the proprioceptive system is indirectly related to jumps performed at specified heights. Therefore, this study recorded the ability of young athletes who play team sports to jump to a specific height compared with their maximum ability. A total of 154 male (age: 14.8 ± 0.9 years, body height: 181.8 ± 8.9 cm, body weight: 69.8 ± 11.8 kg, training experience: 3.8 ± 1.7 years) and 151 female (age: 14.1 ± 0.8 years, body height: 170.5 ± 6.5 cm, body weight: 60.3 ± 9.4 kg, training experience: 3.7 ± 1.4 years) team games players were recruited for this study. Each participant performed 2 countermovement jumps with arm swing to 25, 50, 75, and 100% of the maximum height. Measurements were performed using a force plate. Jump height and its accuracy with respect to a specified height were calculated. The results revealed no significant differences in jump height and its accuracy to the specified heights between the groups (stratified by age, sex, and sport). Individuals with a higher jumping accuracy also exhibited greater maximum jump heights. Jumps to 25% of the maximum height were approximately 2 times higher than the target height. The decreased jump accuracy to a specific height when attempting to jump to lower heights should be reduced with training, particularly among athletes who play team sports. These findings provide useful information regarding the proprioceptive system for team sport coaches and may shape guidelines for training routines by working with submaximal loads. PMID:28538322

Does practicing a wide range of joint angle configurations lead to higher flexibility in a manual obstacle-avoidance target-pointing task?

PubMed Central

Bootsma, Reinoud J.; Schoemaker, Marina M.; Otten, Egbert; Mouton, Leonora J.; Bongers, Raoul M.

2017-01-01

Flexibility in motor actions can be defined as variability in the use of degrees of freedom (e.g., joint angles in the arm) over repetitions while keeping performance (e.g., fingertip position) stabilized. We examined whether flexibility can be increased through enlarging the joint angle range during practice in a manual obstacle-avoidance target-pointing task. To establish differences in flexibility we partitioned the variability in joint angles over repetitions in variability within (GEV) and variability outside the solution space (NGEV). More GEV than NGEV reflects flexibility; when the ratio of the GEV and NGEV is higher, flexibility is higher. The pretest and posttest consisted of 30 repetitions of manual pointing to a target while moving over a 10 cm high obstacle. To enlarge the joint angle range during practice participants performed 600 target-pointing movements while moving over obstacles of different heights (5–9 cm, 11–15 cm). The results indicated that practicing movements over obstacles of different heights led participants to use enlarged range of joint angles compared to the range of joint angles used in movements over the 10 cm obstacle in the pretest. However, for each individual obstacle neither joint angle variance nor flexibility were higher during practice. We also did not find more flexibility after practice. In the posttest, joint angle variance was in fact smaller than before practice, primarily in GEV. The potential influences of learning effects and the task used that could underlie the results obtained are discussed. We conclude that with this specific type of practice in this specific task, enlarging the range of joint angles does not lead to more flexibility. PMID:28700695

The Effects of Height and Distance on the Force Production and Acceleration in Martial Arts Strikes

PubMed Central

Bolander, Richard P.; Neto, Osmar Pinto; Bir, Cynthia A.

2009-01-01

Almost all cultures have roots in some sort of self defence system and yet there is relatively little research in this area, outside of a sports related environment. This project investigated different applications of strikes from Kung Fu practitioners that have not been addressed before in the literature. Punch and palm strikes were directly compared from different heights and distances, with the use of a load cell, accelerometers, and high speed video. The data indicated that the arm accelerations of both strikes were similar, although the force and resulting acceleration of the target were significantly greater for the palm strikes. Additionally, the relative height at which the strike was delivered was also investigated. The overall conclusion is that the palm strike is a more effective strike for transferring force to an object. It can also be concluded that an attack to the chest would be ideal for maximizing impact force and moving an opponent off balance. Key Points It has been determined that the palm strike is more effective than the punch for developing force and for transferring momentum, most likely the result of a reduced number of rigid links and joints. A strike at head level is less effective than a strike at chest level for developing force and transferring momentum. Distance plays an effect on the overall force and momentum changes, and most likely is dependent on the velocity of the limb and alignment of the bones prior to impact. The teaching of self defence for novices and law enforcement would benefit from including the palm strike as a high priority technique. PMID:24474886

a Landmark Extraction Method Associated with Geometric Features and Location Distribution

NASA Astrophysics Data System (ADS)

Zhang, W.; Li, J.; Wang, Y.; Xiao, Y.; Liu, P.; Zhang, S.

2018-04-01

Landmark plays an important role in spatial cognition and spatial knowledge organization. Significance measuring model is the main method of landmark extraction. It is difficult to take account of the spatial distribution pattern of landmarks because that the significance of landmark is built in one-dimensional space. In this paper, we start with the geometric features of the ground object, an extraction method based on the target height, target gap and field of view is proposed. According to the influence region of Voronoi Diagram, the description of target gap is established to the geometric representation of the distribution of adjacent targets. Then, segmentation process of the visual domain of Voronoi K order adjacent is given to set up target view under the multi view; finally, through three kinds of weighted geometric features, the landmarks are identified. Comparative experiments show that this method has a certain coincidence degree with the results of traditional significance measuring model, which verifies the effectiveness and reliability of the method and reduces the complexity of landmark extraction process without losing the reference value of landmark.

Consequences of flight height and line spacing on airborne (helicopter) gravity gradient resolution in the Great Sand Dunes National Park and Preserve, Colorado

USGS Publications Warehouse

Kass, M. Andy

2013-01-01

Line spacing and flight height are critical parameters in airborne gravity gradient surveys; the optimal trade-off between survey costs and desired resolution, however, is different for every situation. This article investigates the additional benefit of reducing the flight height and line spacing though a study of a survey conducted over the Great Sand Dunes National Park and Preserve, which is the highest-resolution public-domain airborne gravity gradient data set available, with overlapping high- and lower-resolution surveys. By using Fourier analysis and matched filtering, it is shown that while the lower-resolution survey delineates the target body, reducing the flight height from 80 m to 40 m and the line spacing from 100 m to 50 m improves the recoverable resolution even at basement depths.

Epigenetic profiling of growth plate chondrocytes sheds insight into regulatory genetic variation influencing height.

PubMed

Guo, Michael; Liu, Zun; Willen, Jessie; Shaw, Cameron P; Richard, Daniel; Jagoda, Evelyn; Doxey, Andrew C; Hirschhorn, Joel; Capellini, Terence D

2017-12-05

GWAS have identified hundreds of height-associated loci. However, determining causal mechanisms is challenging, especially since height-relevant tissues (e.g. growth plates) are difficult to study. To uncover mechanisms by which height GWAS variants function, we performed epigenetic profiling of murine femoral growth plates. The profiled open chromatin regions recapitulate known chondrocyte and skeletal biology, are enriched at height GWAS loci, particularly near differentially expressed growth plate genes, and enriched for binding motifs of transcription factors with roles in chondrocyte biology. At specific loci, our analyses identified compelling mechanisms for GWAS variants. For example, at CHSY1 , we identified a candidate causal variant (rs9920291) overlapping an open chromatin region. Reporter assays demonstrated that rs9920291 shows allelic regulatory activity, and CRISPR/Cas9 targeting of human chondrocytes demonstrates that the region regulates CHSY1 expression. Thus, integrating biologically relevant epigenetic information (here, from growth plates) with genetic association results can identify biological mechanisms important for human growth.

The face of fear and anger: Facial width-to-height ratio biases recognition of angry and fearful expressions.

PubMed

Deska, Jason C; Lloyd, E Paige; Hugenberg, Kurt

2018-04-01

The ability to rapidly and accurately decode facial expressions is adaptive for human sociality. Although judgments of emotion are primarily determined by musculature, static face structure can also impact emotion judgments. The current work investigates how facial width-to-height ratio (fWHR), a stable feature of all faces, influences perceivers' judgments of expressive displays of anger and fear (Studies 1a, 1b, & 2), and anger and happiness (Study 3). Across 4 studies, we provide evidence consistent with the hypothesis that perceivers more readily see anger on faces with high fWHR compared with those with low fWHR, which instead facilitates the recognition of fear and happiness. This bias emerges when participants are led to believe that targets displaying otherwise neutral faces are attempting to mask an emotion (Studies 1a & 1b), and is evident when faces display an emotion (Studies 2 & 3). Together, these studies suggest that target facial width-to-height ratio biases ascriptions of emotion with consequences for emotion recognition speed and accuracy. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Photoinitiator Nucleotide for Quantifying Nucleic Acid Hybridization

PubMed Central

Johnson, Leah M.; Hansen, Ryan R.; Urban, Milan; Kuchta, Robert D.; Bowman, Christopher N.

2010-01-01

This first report of a photoinitiator-nucleotide conjugate demonstrates a novel approach for sensitive, rapid and visual detection of DNA hybridization events. This approach holds potential for various DNA labeling schemes and for applications benefiting from selective DNA-based polymerization initiators. Here, we demonstrate covalent, enzymatic incorporation of an eosin-photoinitiator 2′-deoxyuridine-5′-triphosphate (EITC-dUTP) conjugate into surface-immobilized DNA hybrids. Subsequent radical chain photoinitiation from these sites using an acrylamide/bis-acrylamide formulation yields a dynamic detection range between 500pM and 50nM of DNA target. Increasing EITC-nucleotide surface densities leads to an increase in surface-based polymer film heights until achieving a film height plateau of 280nm ±20nm at 610 ±70 EITC-nucleotides/μm2. Film heights of 10–20 nm were obtained from eosin surface densities of approximately 20 EITC-nucleotides/μm2 while below the detection limit of ~10 EITC-nucleotides/μm2, no detectable films were formed. This unique threshold behavior is utilized for instrument-free, visual quantification of target DNA concentration ranges. PMID:20337438

Correcting X-ray spectra obtained from the AXAF VETA-I mirror calibration for pileup, continuum, background and deadtime

NASA Technical Reports Server (NTRS)

Chartas, G.; Flanagan, K.; Hughes, J. P.; Kellogg, E. M.; Nguyen, D.; Zombek, M.; Joy, M.; Kolodziejezak, J.

1993-01-01

The VETA-I mirror was calibrated with the use of a collimated soft X-ray source produced by electron bombardment of various anode materials. The FWHM, effective area and encircled energy were measured with the use of proportional counters that were scanned with a set of circular apertures. The pulsers from the proportional counters were sent through a multichannel analyzer that produced a pulse height spectrum. In order to characterize the properties of the mirror at different discrete photon energies one desires to extract from the pulse height distribution only those photons that originated from the characteristic line emission of the X-ray target source. We have developed a code that fits a modeled spectrum to the observed X-ray data, extracts the counts that originated from the line emission, and estimates the error in these counts. The function that is fitted to the X-ray spectra includes a Prescott function for the resolution of the detector a second Prescott function for a pileup peak and a X-ray continuum function. The continuum component is determined by calculating the absorption of the target Bremsstrahlung through various filters, correcting for the reflectivity of the mirror and convolving with the detector response.

Correcting x ray spectra obtained from the AXAF VETA-I mirror calibration for pileup, continuum, background and deadtime

NASA Technical Reports Server (NTRS)

Chartas, G.; Flanagan, Kathy; Hughes, John P.; Kellogg, Edwin M.; Nguyen, D.; Zombeck, M.; Joy, M.; Kolodziejezak, J.

1992-01-01

The VETA-I mirror was calibrated with the use of a collimated soft X-ray source produced by electron bombardment of various anode materials. The FWHM, effective area and encircled energy were measured with the use of proportional counters that were scanned with a set of circular apertures. The pulsers from the proportional counters were sent through a multichannel analyzer that produced a pulse height spectrum. In order to characterize the properties of the mirror at different discrete photon energies one desires to extract from the pulse height distribution only those photons that originated from the characteristic line emission of the X-ray target source. We have developed a code that fits a modeled spectrum to the observed X-ray data, extracts the counts that originated from the line emission, and estimates the error in these counts. The function that is fitted to the X-ray spectra includes a Prescott function for the resolution of the detector a second Prescott function for a pileup peak and a X-ray continuum function. The continuum component is determined by calculating the absorption of the target Bremsstrahlung through various filters correcting for the reflectivity of the mirror and convolving with the detector response.

The Effect of Adolescent Experience on Labor Market Outcomes: The Case of Height.

ERIC Educational Resources Information Center

Persico, Nicola; Postlewaite, Andrew; Silverman, Dan

2004-01-01

Taller workers receive a wage premium. Net of differences in family background, the disparity is similar in magnitude to the race and gender gaps. We exploit variation in an individual's height over time to explore how height affects wages. Controlling for teen height essentially eliminates the effect of adult height on wages for white men. The…

Correlations between the MR Diffusion-weighted Image (DWI) and the bone mineral density (BMD) as a function of the soft tissue thickness-focus on phantom and patient

NASA Astrophysics Data System (ADS)

Kim, Myung-Sam; Cho, Jae-Hwan; Lee, Hae-Kag; Lee, Sang-Jeong; Park, Cheol-Soo; Dong, Kyung-Rae; Park, Yong-Soon; Chung, Woon-Kwan; Lee, Jong-Woong; Kim, Ho-Sung; Kim, Eun-Hye; Kweon, Dae Cheol; Yeo, Hwa-Yeon

2013-02-01

In this study we used lumbar phantoms to determine if the BMD (bone mineral density) changes when only the thickness of soft tissue is increased. Second, we targeted osteoporosis patients to analyze the dependences of the changes in the SNR (signal-to-noise ratio) and the ADC (apparent diffusion coefficient) on changes in T-score. We used a bone mineral densitometer, phantoms such as an aluminum spine phantom (ASP), a Hologic spine phantom (HSP), and a European spine phantom (ESP), five sheets of acrylic panel, and a water bath to study the effects of changes in the thickness of soft tissue. First, we measured the ASP, the HSP and the ESP. For the measurement of the ASP, we filled it with water to increase the height by 0.5 cm starting from the baseline height. We then did three measurements for each height. For the measurements of the HSP and the ESP, we placed an acrylic panel on the phantom and then did three measurements at each height. We used the ASP to calculate the degree of precision of the standard mode and the thick mode at the maximum height of the water bath. To assess the degree of precision in the measurements of the three types of phantoms, we calculated precision errors and analyzed the correlation between the change in the thickness of soft tissue and the variables of the BMD. Using DWIs (diffusion weighted images), we targeted 30 healthy persons without osteoporosis and 30 patients with a finding of osteoporosis and measured the T-scores for the L1 — L4 (lumbar spine) segments of by the spine using the dual-energy X-ray absorptiometry (DXA) before classifying the measurement at each part of the spine as osteopenia or osteoporosis. We measured the signal intensity on all four parts of L1-L4 in the DWIs obtained using a 1.5T MR scanner and measured the ADC in the ADC map image. We compared changes in the SNR and the ADC for each group. The study results confirmed that an increase in the thickness of the soft tissue had a significant correlation with the BMD and that the SNR and the ADC decreased as the T-score in the DWI went down.

An empirical approach to inversion of an unconventional helicopter electromagnetic dataset

USGS Publications Warehouse

Pellerin, L.; Labson, V.F.

2003-01-01

A helicopter electromagnetic (HEM) survey acquired at the U.S. Idaho National Engineering and Environmental Laboratory (INEEL) used a modification of a traditional mining airborne method flown at low levels for detailed characterization of shallow waste sites. The low sensor height, used to increase resolution, invalidates standard assumptions used in processing HEM data. Although the survey design strategy was sound, traditional interpretation techniques, routinely used in industry, proved ineffective. Processed data and apparent resistivity maps were severely distorted, and hence unusable, due to low flight height effects, high magnetic permeability of the basalt host, and the conductive, three-dimensional nature of the waste site targets.To accommodate these interpretation challenges, we modified a one-dimensional inversion routine to include a linear term in the objective function that allows for the magnetic and three-dimensional electromagnetic responses in the in-phase data. Although somewhat ad hoc, the use of this term in the inverse routine, referred to as the shift factor, was successful in defining the waste sites and reducing noise due to the low flight height and magnetic characteristics of the host rock. Many inversion scenarios were applied to the data and careful analysis was necessary to determine the parameters appropriate for interpretation, hence the approach was empirical. Data from three areas were processed with this scheme to highlight different interpretational aspects of the method. Wastes sites were delineated with the shift terms in two of the areas, allowing for separation of the anthropomorphic targets from the natural one-dimensional host. In the third area, the estimated resistivity and the shift factor were used for geological mapping. The high magnetic content of the native soil enabled the mapping of disturbed soil with the shift term. Published by Elsevier Science B.V.

Relative importance of expertise, lifting height and weight lifted on posture and lumbar external loading during a transfer task in manual material handling.

PubMed

Plamondon, André; Larivière, Christian; Delisle, Alain; Denis, Denys; Gagnon, Denis

2012-01-01

The objective of this study was to measure the effect size of three important factors in manual material handling, namely expertise, lifting height and weight lifted. The effect of expertise was evaluated by contrasting 15 expert and 15 novice handlers, the effect of the weight lifted with a 15-kg box and a 23-kg box and the effect of lifting height with two different box heights: ground level and a 32 cm height. The task consisted of transferring a series of boxes from a conveyor to a hand trolley. Lifting height and weight lifted had more effect size than expertise on external back loading variables (moments) while expertise had low impact. On the other hand, expertise showed a significant effect of posture variables on the lumbar spine and knees. All three factors are important, but for a reduction of external back loading, the focus should be on the lifting height and weight lifted. The objective was to measure the effect size of three important factors in a transfer of boxes from a conveyor to a hand trolley. Lifting height and weight lifted had more effect size than expertise on external back loading variables but expertise was a major determinant in back posture.

The end-state comfort effect in bimanual grip selection.

PubMed

Fischman, Mark G; Stodden, David F; Lehman, Davana M

2003-03-01

During a unimanual grip selection task in which people pick up a lightweight dowel and place one end against targets at variable heights, the choice of hand grip (overhand vs. underhand) typically depends on the perception of how comfortable the arm will be at the end of the movement: an end-state comfort effect. The two experiments reported here extend this work to bimanual tasks. In each experiment, 26 right-handed participants used their left and right hands to simultaneously pick up two wooden dowels and place either the right or left end against a series of 14 targets ranging from 14 to 210 cm above the floor. These tasks were performed in systematic ascending and descending orders in Experiment 1 and in random order in Expiment 2. Results were generally consistent with predictions of end-state comfort in that, for the extreme highest and lowest targets, participants tended to select opposite grips with each hand. Taken together, our findings are consistent with the concept of constraint hierarchies within a posture-based motion-planning model.

Performance modeling of the effects of aperture phase error, turbulence, and thermal blooming on tiled subaperture systems

NASA Astrophysics Data System (ADS)

Leakeas, Charles L.; Capehart, Shay R.; Bartell, Richard J.; Cusumano, Salvatore J.; Whiteley, Matthew R.

2011-06-01

Laser weapon systems comprised of tiled subapertures are rapidly emerging in importance in the directed energy community. Performance models of these laser weapon systems have been developed from numerical simulations of a high fidelity wave-optics code called WaveTrain which is developed by MZA Associates. System characteristics such as mutual coherence, differential jitter, and beam quality rms wavefront error are defined for a focused beam on the target. Engagement scenarios are defined for various platform and target altitudes, speeds, headings, and slant ranges along with the natural wind speed and heading. Inputs to the performance model include platform and target height and velocities, Fried coherence length, Rytov number, isoplanatic angle, thermal blooming distortion number, Greenwood and Tyler frequencies, and atmospheric transmission. The performance model fit is based on power-in-the-bucket (PIB) values against the PIB from the simulation results for the vacuum diffraction-limited spot size as the bucket. The goal is to develop robust performance models for aperture phase error, turbulence, and thermal blooming effects in tiled subaperture systems.

Response to growth hormone therapy in adolescents with familial panhypopituitarism.

PubMed

Kulshreshtha, B; Eunice, M; Ammini, A C

2010-04-01

Familial combined pituitary hormone deficiency is a rare endocrine disorder. We describe growth patterns of four children (3 females and 1 male) from two families with combined pituitary hormone deficiency. These children received growth hormone at ages ranging from 14.5 years to 19 years. While all the female siblings reached their target height, the male sibling was much shorter than mid parental height. The reasons for sexual dimorphism in growth patterns in these children are unclear.

Two antenna, two pass interferometric synthetic aperture radar

DOEpatents

Martinez, Ana; Doerry, Armin W.; Bickel, Douglas L.

2005-06-28

A multi-antenna, multi-pass IFSAR mode utilizing data driven alignment of multiple independent passes can combine the scaling accuracy of a two-antenna, one-pass IFSAR mode with the height-noise performance of a one-antenna, two-pass IFSAR mode. A two-antenna, two-pass IFSAR mode can accurately estimate the larger antenna baseline from the data itself and reduce height-noise, allowing for more accurate information about target ground position locations and heights. The two-antenna, two-pass IFSAR mode can use coarser IFSAR data to estimate the larger antenna baseline. Multi-pass IFSAR can be extended to more than two (2) passes, thereby allowing true three-dimensional radar imaging from stand-off aircraft and satellite platforms.

Target Seedling Symposium: Proceedings, combined meeting of the Western Forest Nursery Associations

Treesearch

Robin Rose; Sally J. Campbell; Thomas D. Landis

1990-01-01

This publication, a compilation of 28 technical articles on various aspects of forest nursery management in western North America, consists of two sections. The first 10 papers comprise the Target Seedling Symposium, and discuss the latest methods of describing and measuring the ideal seedling for reforestation purposes. Morphological characteristics such as height,...

Use of Naturally Available Reference Targets to Calibrate Airborne Laser Scanning Intensity Data

PubMed Central

Vain, Ants; Kaasalainen, Sanna; Pyysalo, Ulla; Krooks, Anssi; Litkey, Paula

2009-01-01

We have studied the possibility of calibrating airborne laser scanning (ALS) intensity data, using land targets typically available in urban areas. For this purpose, a test area around Espoonlahti Harbor, Espoo, Finland, for which a long time series of ALS campaigns is available, was selected. Different target samples (beach sand, concrete, asphalt, different types of gravel) were collected and measured in the laboratory. Using tarps, which have certain backscattering properties, the natural samples were calibrated and studied, taking into account the atmospheric effect, incidence angle and flying height. Using data from different flights and altitudes, a time series for the natural samples was generated. Studying the stability of the samples, we could obtain information on the most ideal types of natural targets for ALS radiometric calibration. Using the selected natural samples as reference, the ALS points of typical land targets were calibrated again and examined. Results showed the need for more accurate ground reference data, before using natural samples in ALS intensity data calibration. Also, the NIR camera-based field system was used for collecting ground reference data. This system proved to be a good means for collecting in situ reference data, especially for targets with inhomogeneous surface reflection properties. PMID:22574045

I get height with a little help from my friends: herd protection from sanitation on child growth in rural Ecuador

PubMed Central

Fuller, James A; Villamor, Eduardo; Cevallos, William; Trostle, James; Eisenberg, Joseph NS

2016-01-01

Abstract Background: Infectious disease interventions, such as vaccines and bed nets, have the potential to provide herd protection to non-recipients. Similarly, improved sanitation in one household may provide community-wide benefits if it reduces contamination in the shared environment. Sanitation at the household level is an important predictor of child growth, but less is known about the effect of sanitation coverage in the community. Methods: From 2008 to 2013, we took repeated anthropometric measurements on 1314 children under 5 years of age in 24 rural Ecuadorian villages. Using mixed effects regression, we estimated the association between sanitation coverage in surrounding households and child growth. Results: Sanitation coverage in the surrounding households was strongly associated with child height, as those with 100% coverage in their surroundings had a 67% lower prevalence of stunting [prevalence ratio (PR) 0.32, 95% CI 0.15-0.69] compared with those with 0% coverage. Children from households with improved sanitation had a lower prevalence of stunting (PR 0.86, 95% CI 0.64-1.15). When analysing height as a continuous outcome, the protective effect of sanitation coverage is manifested primarily among girls during the second year of life, the time at which growth faltering is most likely to occur. Conclusions: Our study highlights that a household’s sanitation practices can provide herd protection to the overall community. Studies which fail to account for the positive externalities that sanitation provides will underestimate the overall protective effect. Future studies could seek to identify a threshold of sanitation coverage, similar to a herd immunity threshold, to provide coverage and compliance targets. PMID:26936912

Chronobiological Hypothesis about the Association Between Height Growth Seasonality and Geographical Differences in Body Height According to Effective Day Length

PubMed Central

Higuchi, Yukito

2016-01-01

Studies on growth hormone therapy in children have shown that height velocity is greater in summer than in winter and that this difference increases with latitude. It is hypothesized that summer daylight is a causative factor and that geographical distribution of body height will approximate the distribution of summer day length over time. This is an ecological analysis of prefecture-level data on the height of Japanese youth. Mesh climatic data of effective day length were collated. While height velocity was greatest during the summer, the height of Japanese youth was strongly and negatively correlated with the distribution of winter effective day length. Therefore, it is anticipated that summer height velocity is greater according to winter day length (dark period). This may be due to epigenetic modifications, involving reversible DNA methylation and thyroid hormone regulation found in the reproductive system of seasonal breeding vertebrates. If the function is applicable to humans, summer height growth may quantitatively increase with winter day length, and height growth seasonality can be explained by thyroid hormone activities that-induced by DNA methylation-change depending on the seasonal difference in day length. Moreover, geographical differences in body height may be caused by geographical differences in effective day length, which could influence melatonin secretion among subjects who spend a significant time indoors.

Effects of Wheelchair Seat-height Settings on Alternating Lower Limb Propulsion With Both Legs.

PubMed

Murata, Tomoyuki; Asami, Toyoko; Matsuo, Kiyomi; Kubo, Atsuko; Okigawa, Etsumi

2014-01-01

This study investigated the effects of seat-height settings of wheelchairs with alternating propulsion with both legs. Seven healthy individuals with no orthopedic disease participated. Flexion angles at initial contact (FA-IC) of each joint, range of motion during propulsion period (ROM-PP), and ground reaction force (GRF) were measured using a three dimensional motion capture system and force plates, and compared with different seat-height settings. Statistically significant relationships were found between seat-height and speed, stride length, knee FA-IC, ankle FA-IC, hip ROM-PP, vertical ground reaction force (VGRF), and anterior posterior ground reaction force (APGRF). Speed, hip ROM-PP, VGRF and APGRF increased as the seat-height was lowered. This effect diminished when the seat-height was set below -40 mm. VGRF increased as the seat-height was lowered. The results suggest that the seat-height effect can be attributed to hip ROM-PP; therefore, optimal foot propulsion cannot be achieved when the seat height is set either too high or too low. Efficient foot propulsion of the wheelchair can be achieved by setting the seat height to lower leg length according to a combination of physical characteristics, such as the user's physical functions, leg muscles, and range of motion.

Investigating maternal risk factors as potential targets of intervention to reduce socioeconomic inequality in small for gestational age: a population-based study.

PubMed

Hayward, Irene; Malcoe, Lorraine Halinka; Cleathero, Lesley A; Janssen, Patricia A; Lanphear, Bruce P; Hayes, Michael V; Mattman, Andre; Pampalon, Robert; Venners, Scott A

2012-06-13

The major aim of this study was to investigate whether maternal risk factors associated with socioeconomic status and small for gestational age (SGA) might be viable targets of interventions to reduce differential risk of SGA by socioeconomic status (socioeconomic SGA inequality) in the metropolitan area of Vancouver, Canada. This study included 59,039 live, singleton births in the Vancouver Census Metropolitan Area (Vancouver) from January 1, 2006 to September 17, 2009. To identify an indicator of socioeconomic SGA inequality, we used hierarchical logistic regression to model SGA by area-level variables from the Canadian census. We then modelled SGA by area-level average income plus established maternal risk factors for SGA and calculated population attributable SGA risk percentages (PAR%) for each variable. Associations of maternal risk factors for SGA with average income were investigated to identify those that might contribute to SGA inequality. Finally, we estimated crude reductions in the percentage and absolute differences in SGA risks between highest and lowest average income quintiles that would result if interventions on maternal risk factors successfully equalized them across income levels or eliminated them altogether. Average income produced the most linear and statistically significant indicator of socioeconomic SGA inequality with 8.9% prevalence of SGA in the lowest income quintile compared to 5.6% in the highest. The adjusted PAR% of SGA for variables were: bottom four quintiles of height (51%), first birth (32%), bottom four quintiles of average income (14%), oligohydramnios (7%), underweight or hypertension, (6% each), smoking (3%) and placental disorder (1%). Shorter height, underweight and smoking during pregnancy had higher prevalence in lower income groups. Crude models assuming equalization of risk factors across income levels or elimination altogether indicated little potential change in relative socioeconomic SGA inequality and reduction in absolute SGA inequality for shorter height only. Our findings regarding maternal height may indicate trans-generational aetiology for socioeconomic SGA inequalities and/or that adult height influences social mobility. Conditions affecting foetal and childhood growth might be viable targets to reduce absolute socioeconomic SGA inequality in future generations, but more research is needed to determine whether such an approach is appropriate.

Frames of reference in action plan recall: influence of hand and handedness.

PubMed

Seegelke, Christian; Hughes, Charmayne M L; Wunsch, Kathrin; van der Wel, Robrecht; Weigelt, Matthias

2015-10-01

Evidence suggests that people are more likely to recall features of previous plans and use them for subsequent movements, rather than generating action plans from scratch for each movement. The information used for plan recall during object manipulation tasks is stored in extrinsic (object-centered) rather than intrinsic (body-centered) coordinates. The present study examined whether action plan recall processes are influenced by manual asymmetries. Right-handed (Experiment 1) and left-handed (Experiment 2) participants grasped a plunger from a home position using either the dominant or the non-dominant hand and placed it at one of the three target positions located at varying heights (home-to-target moves). Subsequently, they stepped sideways down from a podium (step-down podium), onto a podium (step-up podium), or without any podium present (no podium), before returning the plunger to the home platform using the same hand (target-back-to-home moves). The data show that, regardless of hand and handedness, participants grasped the plunger at similar heights during the home-to-target and target-back-to-home moves, even if they had to adopt quite different arm postures to do so. Thus, these findings indicate that the information used for plan recall processes in sequential object manipulation tasks is stored in extrinsic coordinates and in an effector-independent manner.

Atomic Force Microscopy Probing of Receptor–Nanoparticle Interactions for Riboflavin Receptor Targeted Gold–Dendrimer Nanocomposites

PubMed Central

2015-01-01

Riboflavin receptors are overexpressed in malignant cells from certain human breast and prostate cancers, and they constitute a group of potential surface markers important for cancer targeted delivery of therapeutic agents and imaging molecules. Here we report on the fabrication and atomic force microscopy (AFM) characterization of a core–shell nanocomposite consisting of a gold nanoparticle (AuNP) coated with riboflavin receptor-targeting poly(amido amine) dendrimer. We designed this nanocomposite for potential applications such as a cancer targeted imaging material based on its surface plasmon resonance properties conferred by AuNP. We employed AFM as a technique for probing the binding interaction between the nanocomposite and riboflavin binding protein (RfBP) in solution. AFM enabled precise measurement of the AuNP height distribution before (13.5 nm) and after chemisorption of riboflavin-conjugated dendrimer (AuNP–dendrimer; 20.5 nm). Binding of RfBP to the AuNP–dendrimer caused a height increase to 26.7 nm, which decreased to 22.8 nm when coincubated with riboflavin as a competitive ligand, supporting interaction of AuNP–dendrimer and its target protein. In summary, physical determination of size distribution by AFM imaging can serve as a quantitative approach to monitor and characterize the nanoscale interaction between a dendrimer-covered AuNP and target protein molecules in vitro. PMID:24571134

Comparison of dust-layer heights from active and passive satellite sensors

NASA Astrophysics Data System (ADS)

Kylling, Arve; Vandenbussche, Sophie; Capelle, Virginie; Cuesta, Juan; Klüser, Lars; Lelli, Luca; Popp, Thomas; Stebel, Kerstin; Veefkind, Pepijn

2018-05-01

Aerosol-layer height is essential for understanding the impact of aerosols on the climate system. As part of the European Space Agency Aerosol_cci project, aerosol-layer height as derived from passive thermal and solar satellite sensors measurements have been compared with aerosol-layer heights estimated from CALIOP measurements. The Aerosol_cci project targeted dust-type aerosol for this study. This ensures relatively unambiguous aerosol identification by the CALIOP processing chain. Dust-layer height was estimated from thermal IASI measurements using four different algorithms (from BIRA-IASB, DLR, LMD, LISA) and from solar GOME-2 (KNMI) and SCIAMACHY (IUP) measurements. Due to differences in overpass time of the various satellites, a trajectory model was used to move the CALIOP-derived dust heights in space and time to the IASI, GOME-2 and SCIAMACHY dust height pixels. It is not possible to construct a unique dust-layer height from the CALIOP data. Thus two CALIOP-derived layer heights were used: the cumulative extinction height defined as the height where the CALIOP extinction column is half of the total extinction column, and the geometric mean height, which is defined as the geometrical mean of the top and bottom heights of the dust layer. In statistical average over all IASI data there is a general tendency to a positive bias of 0.5-0.8 km against CALIOP extinction-weighted height for three of the four algorithms assessed, while the fourth algorithm has almost no bias. When comparing geometric mean height there is a shift of -0.5 km for all algorithms (getting close to zero for the three algorithms and turning negative for the fourth). The standard deviation of all algorithms is quite similar and ranges between 1.0 and 1.3 km. When looking at different conditions (day, night, land, ocean), there is more detail in variabilities (e.g. all algorithms overestimate more at night than during the day). For the solar sensors it is found that on average SCIAMACHY data are lower by -1.097 km (-0.961 km) compared to the CALIOP geometric mean (cumulative extinction) height, and GOME-2 data are lower by -1.393 km (-0.818 km).

The consequences of pediatric renal transplantation on bone metabolism and growth.

PubMed

Bacchetta, Justine; Ranchin, Bruno; Demède, Delphine; Allard, Lise

2013-10-01

During childhood, growth retardation, decreased final height and renal osteodystrophy are common complications of chronic kidney disease (CKD). These problems remain present in patients undergoing renal transplantation, even though steroid-sparing strategies are more widely used. In this context, achieving normal height and growth in children after transplantation is a crucial issue for both quality of life and self-esteem. The aim of this review is to provide an overview of pathophysiology of CKD-mineral bone disorder (MBD) in children undergoing renal transplantation and to propose keypoints for its daily management. In adults, calcimimetics are effective for posttransplant hyperparathyroidism, but data are missing in the pediatric population. Fibroblast growth factor 23 levels are associated with increased risk of rejection, but the underlying mechanisms remain unclear. A recent meta-analysis also demonstrated the effectiveness of rhGH therapy in short transplanted children. In 2013, the daily clinical management of CKD-MBD in transplanted children should still focus on simple objectives: to optimize renal function, to develop and promote steroid-sparing strategies, to provide optimal nutritional support to maximize final height and avoid bone deformations, to equilibrate calcium/phosphate metabolism so as to provide acceptable bone quality and cardiovascular status, to correct all metabolic and clinical abnormalities that can worsen both bone and growth (mainly metabolic acidosis, anemia and malnutrition), promote good lifestyle habits (adequate calcium intake, regular physical activity, no sodas consumption, no tobacco exposure) and eventually to correct native vitamin D deficiency (target of 25-vitamin D >75 nmol/l).

Extraction and height estimation of artificial vertical structures based on the wrapped interferometric phase difference within their layovers

NASA Astrophysics Data System (ADS)

Uemoto, Jyunpei; Nadai, Akitsugu; Kojima, Shoichiro; Kobayashi, Tatsuharu; Umehara, Toshihiko; Matsuoka, Takeshi; Uratsuka, Seiho; Satake, Makoto

2018-05-01

The geometric modulation of synthetic aperture radar (SAR) imagery such as radar shadow, foreshortening, and layover often complicates image interpretation while it contains useful information about targets. Recently, some methods for automatic building detection utilizing a peculiar pattern of phase differences (PDs) within building layovers on SAR interferograms have been proposed. One of the merits of these methods is the capability to detect buildings even taller than the height of ambiguity without incorporating any external data. In this paper, we propose a new method that has achieved the following improvements while maintaining the merit mentioned above. The first improvement is freedom from the dependence of target heights; without changing any parameters and thresholds, the proposed method can detect low-rise apartments to skyscrapers. The second one is the prevention of the false grouping of vertical structure constituents by considering relationships between their PDs. In addition, the method can measure the height of vertical structures without assuming their shape to be simple ones such as a parallelogram. These improvements have been verified by applying the method to real datasets acquired from an airborne X-band SAR. The quantitative assessment for apartment complexes has demonstrated the high performance of the method; the correctness and completeness are 94% and 83%, respectively. The mean error in the measured height is -0.2 m, while the standard deviation is 1.8 m. The verification using real datasets has revealed at the same time that the performance of the method can be degraded due to the crowdedness in dense urban areas including skyscrapers and owing to the poor discriminability between artificial vertical structures and trees. Overcoming these limitations is necessary in future studies.

Universal equation for estimating ideal body weight and body weight at any BMI1

PubMed Central

Peterson, Courtney M; Thomas, Diana M; Blackburn, George L; Heymsfield, Steven B

2016-01-01

Background: Ideal body weight (IBW) equations and body mass index (BMI) ranges have both been used to delineate healthy or normal weight ranges, although these 2 different approaches are at odds with each other. In particular, past IBW equations are misaligned with BMI values, and unlike BMI, the equations have failed to recognize that there is a range of ideal or target body weights. Objective: For the first time, to our knowledge, we merged the concepts of a linear IBW equation and of defining target body weights in terms of BMI. Design: With the use of calculus and approximations, we derived an easy-to-use linear equation that clinicians can use to calculate both IBW and body weight at any target BMI value. We measured the empirical accuracy of the equation with the use of NHANES data and performed a comparative analysis with past IBW equations. Results: Our linear equation allowed us to calculate body weights for any BMI and height with a mean empirical accuracy of 0.5–0.7% on the basis of NHANES data. Moreover, we showed that our body weight equation directly aligns with BMI values for both men and women, which avoids the overestimation and underestimation problems at the upper and lower ends of the height spectrum that have plagued past IBW equations. Conclusions: Our linear equation increases the sophistication of IBW equations by replacing them with a single universal equation that calculates both IBW and body weight at any target BMI and height. Therefore, our equation is compatible with BMI and can be applied with the use of mental math or a calculator without the need for an app, which makes it a useful tool for both health practitioners and the general public. PMID:27030535

Universal equation for estimating ideal body weight and body weight at any BMI.

PubMed

Peterson, Courtney M; Thomas, Diana M; Blackburn, George L; Heymsfield, Steven B

2016-05-01

Ideal body weight (IBW) equations and body mass index (BMI) ranges have both been used to delineate healthy or normal weight ranges, although these 2 different approaches are at odds with each other. In particular, past IBW equations are misaligned with BMI values, and unlike BMI, the equations have failed to recognize that there is a range of ideal or target body weights. For the first time, to our knowledge, we merged the concepts of a linear IBW equation and of defining target body weights in terms of BMI. With the use of calculus and approximations, we derived an easy-to-use linear equation that clinicians can use to calculate both IBW and body weight at any target BMI value. We measured the empirical accuracy of the equation with the use of NHANES data and performed a comparative analysis with past IBW equations. Our linear equation allowed us to calculate body weights for any BMI and height with a mean empirical accuracy of 0.5-0.7% on the basis of NHANES data. Moreover, we showed that our body weight equation directly aligns with BMI values for both men and women, which avoids the overestimation and underestimation problems at the upper and lower ends of the height spectrum that have plagued past IBW equations. Our linear equation increases the sophistication of IBW equations by replacing them with a single universal equation that calculates both IBW and body weight at any target BMI and height. Therefore, our equation is compatible with BMI and can be applied with the use of mental math or a calculator without the need for an app, which makes it a useful tool for both health practitioners and the general public. © 2016 American Society for Nutrition.

Plants in a crowded stand regulate their height growth so as to maintain similar heights to neighbours even when they have potential advantages in height growth.

PubMed

Nagashima, Hisae; Hikosaka, Kouki

2011-07-01

Although being tall is advantageous in light competition, plant height growth is often similar among dominant plants in crowded stands (height convergence). Previous theoretical studies have suggested that plants should not overtop neighbours because greater allocation to supporting tissues is necessary in taller plants, which in turn lowers leaf mass fraction and thus carbon gain. However, this model assumes that a competitor has the same potential of height growth as their neighbours, which does not necessarily account for the fact that height convergence occurs even among individuals with various biomass. Stands of individually potted plants of Chenopodium album were established, where target plants were lifted to overtop neighbours or lowered to be overtopped. Lifted plants were expected to keep overtopping because they intercept more light without increased allocation to stems, or to regulate their height to similar levels of neighbours, saving biomass allocation to the supporting organ. Lowered plants were expected to be suppressed due to the low light availability or to increase height growth so as to have similar height to the neighbours. Lifted plants reduced height growth in spite of the fact that they received higher irradiance than others. Lowered plants, on the other hand, increased the rate of stem elongation despite the reduced irradiance. Consequently, lifted and lowered plants converged to the same height. In contrast to the expectation, lifted plants did not increase allocation to leaf mass despite the decreased stem length. Rather, they allocated more biomass to roots, which might contribute to improvement of mechanical stability or water status. It is suggested that decreased leaf mass fraction is not the sole cost of overtopping neighbours. Wind blowing, which may enhance transpiration and drag force, might constrain growth of overtopping plants. The results show that plants in crowded stands regulate their height growth to maintain similar height to neighbours even when they have potential advantages in height growth. This might contribute to avoidance of stresses caused by wind blowing.

The feasibility of using a universal Random Forest model to map tree height across different locations and vegetation types

NASA Astrophysics Data System (ADS)

Su, Y.; Guo, Q.; Jin, S.; Gao, S.; Hu, T.; Liu, J.; Xue, B. L.

2017-12-01

Tree height is an important forest structure parameter for understanding forest ecosystem and improving the accuracy of global carbon stock quantification. Light detection and ranging (LiDAR) can provide accurate tree height measurements, but its use in large-scale tree height mapping is limited by the spatial availability. Random Forest (RF) has been one of the most commonly used algorithms for mapping large-scale tree height through the fusion of LiDAR and other remotely sensed datasets. However, how the variances in vegetation types, geolocations and spatial scales of different study sites influence the RF results is still a question that needs to be addressed. In this study, we selected 16 study sites across four vegetation types in United States (U.S.) fully covered by airborne LiDAR data, and the area of each site was 100 km2. The LiDAR-derived canopy height models (CHMs) were used as the ground truth to train the RF algorithm to predict canopy height from other remotely sensed variables, such as Landsat TM imagery, terrain information and climate surfaces. To address the abovementioned question, 22 models were run under different combinations of vegetation types, geolocations and spatial scales. The results show that the RF model trained at one specific location or vegetation type cannot be used to predict tree height in other locations or vegetation types. However, by training the RF model using samples from all locations and vegetation types, a universal model can be achieved for predicting canopy height across different locations and vegetation types. Moreover, the number of training samples and the targeted spatial resolution of the canopy height product have noticeable influence on the RF prediction accuracy.

Using task dynamics to quantify the affordances of throwing for long distance and accuracy.

PubMed

Wilson, Andrew D; Weightman, Andrew; Bingham, Geoffrey P; Zhu, Qin

2016-07-01

In 2 experiments, the current study explored how affordances structure throwing for long distance and accuracy. In Experiment 1, 10 expert throwers (from baseball, softball, and cricket) threw regulation tennis balls to hit a vertically oriented 4 ft × 4 ft target placed at each of 9 locations (3 distances × 3 heights). We measured their release parameters (angle, speed, and height) and showed that they scaled their throws in response to changes in the target's location. We then simulated the projectile motion of the ball and identified a continuous subspace of release parameters that produce hits to each target location. Each subspace describes the affordance of our target to be hit by a tennis ball moving in a projectile motion to the relevant location. The simulated affordance spaces showed how the release parameter combinations required for hits changed with changes in the target location. The experts tracked these changes in their performance and were successful in hitting the targets. We next tested unusual (horizontal) targets that generated correspondingly different affordance subspaces to determine whether the experts would track the affordance to generate successful hits. Do the experts perceive the affordance? They do. In Experiment 2, 5 cricketers threw to hit either vertically or horizontally oriented targets and successfully hit both, exhibiting release parameters located within the requisite affordance subspaces. We advocate a task dynamical approach to the study of affordances as properties of objects and events in the context of tasks as the future of research in this area. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Effect of bed height and use of hands on trunk angular velocity during the sit-to-stand transfer.

PubMed

Lindemann, Ulrich; van Oosten, Leon; Evers, Jordi; Becker, Clemens; van Dieen, Jaap H; van Lummel, Rob C

2014-01-01

The ability to rise from a chair or bed is critical to an individual's quality of life because it determines functional independence. This study was to investigate the effect of bed height and use of hands on trunk angular velocity and trunk angles during the sit-to-stand (STS) performance. Twenty-four older persons (median age 74 years) were equipped with a body-fixed gyroscopic sensor and stood up from a bed adjusted to different heights, with and without the use of hands at each height. Peak angular velocity and trunk range of motion decreased with increasing bed height (all p ≤ 0.038) and were lower using hands during STS transfer indicating less effort. In conclusion, gyroscopic sensor data of the STS transfer of older persons show differences as an effect of bed height and use of hands. These results provide the rationale for recommending a relatively high bed height for most of the older persons. To minimise the effort during sit-to-stand transfer performance from bed, it is necessary to understand the effect of bed height and use of hands. It is concluded that a relatively high bed height and the use of hands is helpful for most of the older persons during sit-to-stand transfer.

Revision of the design of a standard for the dimensions of school furniture.

PubMed

Molenbroek, J F M; Kroon-Ramaekers, Y M T; Snijders, C J

2003-06-10

In this study an anthropometric design process was followed. The aim was to improve the fit of school furniture sizes for European children. It was demonstrated statistically that the draft of a European standard does not cover the target population. No literature on design criteria for sizes exists, and in practice it is common to calculate the fit for only the mean values (P50). The calculations reported here used body dimensions of Dutch children, measured by the authors' Department, and used data from German and British national standards. A design process was followed that contains several steps, including: Target group, Anthropometric model and Percentage exclusion. The criteria developed in this study are (1) a fit on the basis of 1% exclusion (P1 or P99), and (2) a prescription based on popliteal height. Based on this new approach it was concluded that prescription of a set size should be based on popliteal height rather than body height. The drafted standard, Pren 1729, can be improved with this approach. A European standard for school furniture should include the exception that for Dutch children an extra large size is required.

A comparison of the thick-target model with stereo data on the height structure of solar hard X-ray bursts

NASA Technical Reports Server (NTRS)

Brown, J. C.; Carlaw, V. A.; Cromwell, D.; Kane, S. R.

1983-01-01

The thick target, hard solar X-ray source height structure is predicted for the case of a beam that is injected vertically downward, having a power law spectrum, being dominated by Coulomb collisional energy losses, and being structurally characterized by the ratio of hard X-ray flux from an upper part of the source to that from the entire source. These predictions are compared with the flux ratios at 150 and 350 keV which were observed by two spacecraft for five events in which the solar limb occults part of the source for one spacecraft. The energy dependence of the occultation ratio is found to be inconsistent with that predicted by the model, and it is concluded that noncollisional losses must be significant in beam dynamics.

Self-Fulfilling Prophecies as a Link between Men’s Facial Width-to-Height Ratio and Behavior

PubMed Central

Haselhuhn, Michael P.; Wong, Elaine M.; Ormiston, Margaret E.

2013-01-01

The facial width-to-height ratio (fWHR) has been identified as a reliable predictor of men’s behavior, with researchers focusing on evolutionary selection pressures as the underlying mechanism explaining these relationships. In this paper, we complement this approach and examine the extent to which social processes also determine the extent to which men’s fWHR serves as a behavioral cue. Specifically, we propose that observers’ treatment of target men based on the targets’ fWHR subsequently affects behavior, leading the targets to behave in ways that are consistent with the observers’ expectations (i.e., a self-fulfilling prophecy). Results from four studies demonstrate that individuals behave more selfishly when interacting with men with greater fWHRs, and this selfish behavior, in turn, elicits selfish behavior in others. PMID:24015226

Calibration of high-dynamic-range, finite-resolution x-ray pulse-height spectrometers for extracting electron energy distribution data from the PFRC-2 device

NASA Astrophysics Data System (ADS)

Swanson, C.; Jandovitz, P.; Cohen, S. A.

2017-10-01

Knowledge of the full x-ray energy distribution function (XEDF) emitted from a plasma over a large dynamic range of energies can yield valuable insights about the electron energy distribution function (EEDF) of that plasma and the dynamic processes that create them. X-ray pulse height detectors such as Amptek's X-123 Fast SDD with Silicon Nitride window can detect x-rays in the range of 200eV to 100s of keV. However, extracting EEDF from this measurement requires precise knowledge of the detector's response function. This response function, including the energy scale calibration, the window transmission function, and the resolution function, can be measured directly. We describe measurements of this function from x-rays from a mono-energetic electron beam in a purpose-built gas-target x-ray tube. Large-Z effects such as line radiation, nuclear charge screening, and polarizational Bremsstrahlung are discussed.

Pliocene shorelines and the deformation of passive margins.

NASA Astrophysics Data System (ADS)

Rovere, Alessio; Raymo, Maureen; Austermann, Jacqueline; Mitrovica, Jerry; Janßen, Alexander

2016-04-01

Characteristic geomorphology described from three Pliocene scarps in Rovere et al. [2014] was used to guide a global search for additional Pliocene age scarps that could be used to document former Pliocene shoreline locations. Each of the Rovere et al. [2014] paleo-shorelines was measured at the scarp toe abutting a flat coastal plain. In this study, nine additional such scarp-toe paleo-shorelines were identified. Each of these scarps has been independently dated to the Plio-Pleistocene; however, they were never unified by a single formation mechanism. Even when corrected for Glacial Isostatic Adjustment post-depositional effects, Post-Pliocene deformation of the inferred shorelines precludes a direct assessment of maximum Pliocene sea level height at the scarp toes. However, careful interpretation of the processes at the inferred paleo-shoreline suggests specific amplitudes of dynamic topography at each location, which could lead to a corrected maximum sea level height and provide a target dataset with which to compare dynamic topography model output.

Microdosimetry of low-energy electrons.

PubMed

Liamsuwan, Thiansin; Emfietzoglou, Dimitris; Uehara, Shuzo; Nikjoo, Hooshang

2012-12-01

To investigate differences in energy depositions and microdosimetric parameters of low-energy electrons in liquid and gaseous water using Monte Carlo track structure simulations. KURBUC-liq (Kyushu University and Radiobiology Unit Code for liquid water) was used for simulating electron tracks in liquid water. The inelastic scattering cross sections of liquid water were obtained from the dielectric response model of Emfietzoglou et al. (Radiation Research 2005;164:202-211). Frequencies of energy deposited in nanometre-size cylindrical targets per unit absorbed dose and associated lineal energies were calculated for 100-5000 eV monoenergetic electrons and the electron spectrum of carbon K edge X-rays. The results for liquid water were compared with those for water vapour. Regardless of electron energy, there is a limit how much energy electron tracks can deposit in a target. Phase effects on the frequencies of energy depositions are largely visible for the targets with diameters and heights smaller than 30 nm. For the target of 2.3 nm by 2.3 nm (similar to dimension of DNA segments), the calculated frequency- and dose-mean lineal energies for liquid water are up to 40% smaller than those for water vapour. The corresponding difference is less than 12% for the targets with diameters ≥ 30 nm. Condensed-phase effects are non-negligible for microdosimetry of low-energy electrons for targets with sizes smaller than a few tens of nanometres, similar to dimensions of DNA molecular structures and nucleosomes.

Effects of box handle position and carrying range on bi-manual carrying capacity for females.

PubMed

Wu, Swei-Pi; Loiu, Yi; Chien, Te Hong

2015-01-01

This study utilizes a psychophysical approach to examine the effects on carrying capacity for bi-manual carrying tasks involving different handle positions and carrying ranges. A total of 16 female subjects participated in the experiment in groups of two people, and each group of subjects performed the tasks in a random order with 12 different combinations of carrying task. The independent variables are handle position (upper, middle, lower) and carrying range (F-F: floor height carried to floor height, F-W: floor height carried to waist height, W-W: waist height carried to waist height, W-F: waist height carried to floor height), the dependent variable is the maximum acceptable carried weight (MAWC), heart rate (HR), and the rating of perceived exertion (RPE). The results show that the handle position has a significant effect on MAWC and overall RPE but no significant effect on HR. Carrying range has a significant effect on the MAWC and HR, but no significant effect on overall HR. The handle position and carrying range have a significant interaction on the MAWC and HR. The RPE for different body parts shows significant differences, and the hands feel the most tired. Overall, this study confirms that the lower handle position with the W-W carrying range is the best combination for a two-person carrying task.

Effects of stand density on top height estimation for ponderosa pine

Treesearch

Martin Ritchie; Jianwei Zhang; Todd Hamilton

2012-01-01

Site index, estimated as a function of dominant-tree height and age, is often used as an expression of site quality. This expression is assumed to be effectively independent of stand density. Observation of dominant height at two different ponderosa pine levels-of-growing-stock studies revealed that top height stability with respect to stand density depends on the...

A cloud shadow detection method combined with cloud height iteration and spectral analysis for Landsat 8 OLI data

NASA Astrophysics Data System (ADS)

Sun, Lin; Liu, Xinyan; Yang, Yikun; Chen, TingTing; Wang, Quan; Zhou, Xueying

2018-04-01

Although enhanced over prior Landsat instruments, Landsat 8 OLI can obtain very high cloud detection precisions, but for the detection of cloud shadows, it still faces great challenges. Geometry-based cloud shadow detection methods are considered the most effective and are being improved constantly. The Function of Mask (Fmask) cloud shadow detection method is one of the most representative geometry-based methods that has been used for cloud shadow detection with Landsat 8 OLI. However, the Fmask method estimates cloud height employing fixed temperature rates, which are highly uncertain, and errors of large area cloud shadow detection can be caused by errors in estimations of cloud height. This article improves the geometry-based cloud shadow detection method for Landsat OLI from the following two aspects. (1) Cloud height no longer depends on the brightness temperature of the thermal infrared band but uses a possible dynamic range from 200 m to 12,000 m. In this case, cloud shadow is not a specific location but a possible range. Further analysis was carried out in the possible range based on the spectrum to determine cloud shadow location. This effectively avoids the cloud shadow leakage caused by the error in the height determination of a cloud. (2) Object-based and pixel spectral analyses are combined to detect cloud shadows, which can realize cloud shadow detection from two aspects of target scale and pixel scale. Based on the analysis of the spectral differences between the cloud shadow and typical ground objects, the best cloud shadow detection bands of Landsat 8 OLI were determined. The combined use of spectrum and shape can effectively improve the detection precision of cloud shadows produced by thin clouds. Several cloud shadow detection experiments were carried out, and the results were verified by the results of artificial recognition. The results of these experiments indicated that this method can identify cloud shadows in different regions with correct accuracy exceeding 80%, approximately 5% of the areas were wrongly identified, and approximately 10% of the cloud shadow areas were missing. The accuracy of this method is obviously higher than the recognition accuracy of Fmask, which has correct accuracy lower than 60%, and the missing recognition is approximately 40%.

The use of copulas to practical estimation of multivariate stochastic differential equation mixed effects models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rupšys, P.

A system of stochastic differential equations (SDE) with mixed-effects parameters and multivariate normal copula density function were used to develop tree height model for Scots pine trees in Lithuania. A two-step maximum likelihood parameter estimation method is used and computational guidelines are given. After fitting the conditional probability density functions to outside bark diameter at breast height, and total tree height, a bivariate normal copula distribution model was constructed. Predictions from the mixed-effects parameters SDE tree height model calculated during this research were compared to the regression tree height equations. The results are implemented in the symbolic computational language MAPLE.

Do socio-economic inequalities in infant growth in rural India operate through maternal size and birth weight?

PubMed

Griffiths, Paula L; Balakrishna, Nagalla; Fernandez Rao, Sylvia; Johnson, William

2016-01-01

In total, 3.1 million young children die every year from under-nutrition. Greater understanding of associations between socio-economic status (SES) and the biological factors that shape under-nutrition are required to target interventions. To establish whether SES inequalities in under-nutrition, proxied by infant size at 12 months, operate through maternal and early infant size measures. The sample comprised 347 Indian infants born in 60 villages in rural Andhra Pradesh 2005-2007. Structural equation path models were applied to decompose the total relationship between SES (standard of living index) and length and weight for age Z-scores (LAZ/WAZ) at 12 months into direct and indirect (operating through maternal BMI and height, birthweight Z-score and LAZ/WAZ at 6 months) paths. SES had a direct positive association with LAZ (Standardised coefficient = 0.08, 95% CI = 0.02-0.13) and WAZ at age 12 months (Standardised coefficient = 0.08, 95% CI = 0.02-0.15). It also had additional indirect positive associations through increased maternal height and subsequently increased birthweight and WAZ/LAZ at 6 months, accounting for 35% and 53% of the total effect for WAZ and LAZ, respectively. Findings support targeting evidence based growth interventions towards infants from the poorest families with the shortest mothers. Increasing SES can improve growth for two generations.

Acute Effect of Foam Rolling and Dynamic Stretching on Flexibility and Jump Height.

PubMed

Smith, Jason C; Pridgeon, Brooke; Hall, MacGregor C

2018-04-04

Smith, JC, Pridgeon, B, and Hall, MC. Acute effect of foam rolling and dynamic stretching on flexibility and jump height. J Strength Cond Res XX(X): 000-000, 2017-Dynamic stretching (DS) can acutely improve vertical jump (VJ) performance but its effect lasts no more than 5 minutes. Foam rolling (FR), a form of self-myofascial release, can acutely increase range of motion (ROM) with this effect lasting less than 10 minutes. Therefore, the purpose of this study was to evaluate the time course of these effects, separately and combined, on VJ height and ROM. Twenty-nine university students completed 4 different sessions (control, FR, DS, and combo) in a randomized order. After a warm-up and baseline assessments of VJ height and sit-and-reach, participants rested (control) and performed FR, DS, and the combination of FR and DS (combo). Vertical jump height and ROM were assessed every 5 minutes for 20 minutes after treatment. Mean scores at each time point were expressed as a percent change from baseline scores. Immediately after FR, sit-and-reach was significantly greater than control (p = 0.003). Vertical jump height immediately after treatment for DS and combo was significantly greater than the control and FR counterparts (p ≤ 0.002). Vertical jump height for DS and combo was also significantly greater than the control counterpart at 5 minutes after treatment (p < 0.001). At 15 minutes after treatment, the percent change in VJ height for the combo was significantly greater than the control counterpart (p = 0.002). Although FR has no effect on VJ performance, it can acutely increase ROM, but its effect was quickly dissipated. Foam rolling does not seem to enhance VJ height either alone or in combination with DS.

Rearfoot eversion has indirect effects on plantar fascia tension by changing the amount of arch collapse.

PubMed

Lee, Sae Yong; Hertel, Jay; Lee, Sung Cheol

2010-01-01

Rearfoot eversion motion and arch height are believed to contribute to increased tension on the plantar fascia and arch collapse during gait but the specifics of these relationships are not clear. To examine the relationships among static arch height, rearfoot eversion, dynamic arch height, and plantar fascia tension. 28 healthy males participated. After static arch height was measured, the subjects were asked to run at 4.5m/s while frontal plane rearfoot motion, dynamic arch height, and ground reaction forces were collected. The relationships among variables were examined with bivariate correlations and path analysis. The results indicated a high correlation between dynamic arch height and static arch height (r=0.642), plantar fascia tension (r=-0.797), and maximum rearfoot eversion motion during gait (r=-0.518). The path analysis model without the direct rearfoot eversion effect explained 81.2% of the variance in plantar fascia tension, while the model with the direct rearfoot eversion effect explained 82.1% of the variance in plantar fascia tension. Including the indirect effect of maximum rearfoot eversion motion on plantar fascia tension through control of dynamic arch height is the model that best explains the interrelationships of these foot characteristics. The amount of maximum rearfoot eversion motion itself is not a good predictor of plantar fascia tension, however, together with the arch height, maximum rearfoot eversion motion is a good predictor because it has a pronounced indirect effect on plantar fascia tension. Copyright 2010. Published by Elsevier Ltd.

Fashion versus perception: the impact of surface lightness on the perceived dimensions of interior space.

PubMed

Oberfeld, Daniel; Hecht, Heiko

2011-06-01

We compare expert opinion with perceptual judgment regarding the influence of color on the perceived height and width of interior rooms. We hypothesize that contrary to popular belief, ceiling and wall lightness have additive effects on perceived height, whereas the lightness contrast between these surfaces is less important. We assessed the intuitions of architectural experts as to which surface colors maximize apparent height and compared these intuitions with psychophysical height and width estimates for rooms differing in ceiling, floor, and wall lightness. Experiment 1 was a survey of architectural experts and nonexperts. Experiments 2 and 3 presented virtual rooms varying in physical height, physical width, and surface lightness. In Experiment 1, both experts and nonexperts erroneously assumed that the lightness contrast between ceiling and walls influences perceived height Experiment 2 showed that the lightness contrast does not determine apparent height but that ceiling and wall lightness have additive effects. Experiment 3 demonstrated a decrease in perceived width with physical height, whereas the perceived height was not related to physical width. Apparent width was unaffected by ceiling lightness. Light ceiling and light walls make a room appear higher, whereas floor color has a weaker effect. We also found evidence for an asymmetric interaction between height and width. The question of how to color walls and ceiling to maximize the apparent size of a room can be answered empirically. Aesthetic considerations may interfere with the correct assessment of the effects of color in experts.

Global effects of income and income inequality on adult height and sexual dimorphism in height.

PubMed

Bogin, Barry; Scheffler, Christiane; Hermanussen, Michael

2017-03-01

Average adult height of a population is considered a biomarker of the quality of the health environment and economic conditions. The causal relationships between height and income inequality are not well understood. We analyze data from 169 countries for national average heights of men and women and national-level economic factors to test two hypotheses: (1) income inequality has a greater association with average adult height than does absolute income; and (2) neither income nor income inequality has an effect on sexual dimorphism in height. Average height data come from the NCD-RisC health risk factor collaboration. Economic indicators are derived from the World Bank data archive and include gross domestic product (GDP), Gross National Income per capita adjusted for personal purchasing power (GNI_PPP), and income equality assessed by the Gini coefficient calculated by the Wagstaff method. Hypothesis 1 is supported. Greater income equality is most predictive of average height for both sexes. GNI_PPP explains a significant, but smaller, amount of the variation. National GDP has no association with height. Hypothesis 2 is rejected. With greater average adult height there is greater sexual dimorphism. Findings support a growing literature on the pernicious effects of inequality on growth in height and, by extension, on health. Gradients in height reflect gradients in social disadvantage. Inequality should be considered a pollutant that disempowers people from the resources needed for their own healthy growth and development and for the health and good growth of their children. © 2017 Wiley Periodicals, Inc.

Hip and knee extensor moments predict vertical jump height in adolescent girls.

PubMed

Ford, Kevin R; Myer, Gregory D; Brent, Jensen L; Hewett, Timothy E

2009-07-01

Biomechanical factors, such as hip and knee extensor moments, related to drop jump (DJ) performance have not been investigated in adolescent girls. The purpose of this study was to determine the key independent biomechanical variables that predict overall vertical jump performance in adolescent girls. Sixteen high school adolescent girls from club-sponsored and high school-sponsored volleyball teams performed DJ at 3 different drop heights (15, 30, and 45 cm). A motion analysis system consisting of 10 digital cameras and a force platform was used to calculate vertical jump height, joint angles, and joint moments during the tasks. A multiple linear regression was used to determine the biomechanical parameters that were best predictive of vertical jump height at each box drop distance. The 2 predictor variables in all 3 models were knee and hip extensor moments. The models predicted 82.9, 81.9, and 88% of the vertical jump height variance in the 15, 30, and 45 cm trials, respectively. The results of the investigation indicate that knee and hip joint moments are the main contributors to vertical jump height during the DJ in adolescent girls. Strength and conditioning specialists attempting to improve vertical jump performance should target power and strength training to the hip and knee extensors in their athletes.

Comparing the role of the height of men and women in the marriage market.

PubMed

Yamamura, Eiji; Tsutsui, Yoshiro

2017-08-01

This paper explores how the role of men and women's height in the marriage market has changed across generations. Using individual-level data from Japan, we compared the effect of height on marriages between men and women, and investigated how the effect of height on marriage has changed across generations. Our key findings are: (1) for men born before 1965, a 1% increase in height led to an approximately 0.56% increase in the probability of being married. Conversely, for women born before 1965, a 1% increase in height led to an approximately 0.56% decrease in the probability of being married. (2) For men born in or after 1965, a 1% increase in height led to an approximately 1.05% (0.18%) increase (decrease) in the probability of being married (divorced). However, the height effect was not present for women. Japan experienced astounding economic development after World War II, which resulted in changes in its economic and social structure. These changes may have also altered the role of height for Japanese men and women in the marriage market. Copyright © 2017 Elsevier B.V. All rights reserved.

Experimental evaluation of effective atomic number of composite materials using back-scattering of gamma photons

NASA Astrophysics Data System (ADS)

Singh, Inderjeet; Singh, Bhajan; Sandhu, B. S.; Sabharwal, Arvind D.

2017-04-01

A method has been presented for calculation of effective atomic number (Zeff) of composite materials, by using back-scattering of 662 keV gamma photons obtained from a 137Cs mono-energetic radioactive source. The present technique is a non-destructive approach, and is employed to evaluate Zeff of different composite materials, by interacting gamma photons with semi-infinite material in a back-scattering geometry, using a 3″ × 3″ NaI(Tl) scintillation detector. The present work is undertaken to study the effect of target thickness on intensity distribution of gamma photons which are multiply back-scattered from targets (pure elements) and composites (mixtures of different elements). The intensity of multiply back-scattered events increases with increasing target thickness and finally saturates. The saturation thickness for multiply back-scattered events is used to assign a number (Zeff) for multi-element materials. Response function of the 3″ × 3″ NaI(Tl) scintillation detector is applied on observed pulse-height distribution to include the contribution of partially absorbed photons. The reduced value of signal-to-noise ratio interprets the increase in multiply back-scattered data of a response corrected spectrum. Data obtained from Monte Carlo simulations and literature also support the present experimental results.

Finding missing heritability in less significant Loci and allelic heterogeneity: genetic variation in human height.

PubMed

Zhang, Ge; Karns, Rebekah; Sun, Guangyun; Indugula, Subba Rao; Cheng, Hong; Havas-Augustin, Dubravka; Novokmet, Natalija; Durakovic, Zijad; Missoni, Sasa; Chakraborty, Ranajit; Rudan, Pavao; Deka, Ranjan

2012-01-01

Genome-wide association studies (GWAS) have identified many common variants associated with complex traits in human populations. Thus far, most reported variants have relatively small effects and explain only a small proportion of phenotypic variance, leading to the issues of 'missing' heritability and its explanation. Using height as an example, we examined two possible sources of missing heritability: first, variants with smaller effects whose associations with height failed to reach genome-wide significance and second, allelic heterogeneity due to the effects of multiple variants at a single locus. Using a novel analytical approach we examined allelic heterogeneity of height-associated loci selected from SNPs of different significance levels based on the summary data of the GIANT (stage 1) studies. In a sample of 1,304 individuals collected from an island population of the Adriatic coast of Croatia, we assessed the extent of height variance explained by incorporating the effects of less significant height loci and multiple effective SNPs at the same loci. Our results indicate that approximately half of the 118 loci that achieved stringent genome-wide significance (p-value<5×10(-8)) showed evidence of allelic heterogeneity. Additionally, including less significant loci (i.e., p-value<5×10(-4)) and accounting for effects of allelic heterogeneity substantially improved the variance explained in height.

Demonstration of Reduced False Alarm Rates using Simulated L-Band Polarimetric SAR Imagery of Concealed Targets

DTIC Science & Technology

2005-04-14

of Joensuu, Finland. These take the form of collections of dielectric cylinders, with detailed information concerning sapwood and heartwood dimensions...centre, and at 3km height above the minimum height of the DEM. The imaged area was 91m square, with pixels spaced at 0.5m. A Hamming weighted PSF was...correlation length was 0.1510m. Wood permittivity ranged from 2.2-i0.4 (deadwood) to 26.8-i5.3 ( sapwood ) via 6.7-i1.9 (heartwood). Total attenuation

Mechanical energy expenditures and movement efficiency in full body reaching movements.

PubMed

Sha, Daohang; France, Christopher R; Thomas, James S

2010-02-01

The effect of target location, speed, and handedness on the average total mechanical energy and movement efficiency is studied in 15 healthy subjects (7 males and 8 females with age 22.9 +/- 1.79 years old) performing full body reaching movements. The average total mechanical energy is measured as the time average of integration of joint power, potential energy, and kinetic energy respectively. Movement efficiency is calculated as the ratio of total kinetic energy to the total joint power and potential energy. Results show that speed and target location have significant effects on total mechanical energy and movement efficiency, but reaching hand only effects kinetic energy. From our findings we conclude that (1) efficiency in whole body reaching is dependent on whether the height of the body center of mass is raised or lowered during the task; (2) efficiency is increased as movement speed is increased, in part because of greater changes in potential energy; and (3) the CNS does not appear to use movement efficiency as a primary planning variable in full body reaching. It may be dependent on a combination of other factors or constraints.

Strength Determinants of Jump Height in the Jump Throw Movement in Women Handball Players.

PubMed

McGhie, David; Østerås, Sindre; Ettema, Gertjan; Paulsen, Gøran; Sandbakk, Øyvind

2018-06-08

McGhie, D, Østerås, S, Ettema, G, Paulsen, G, and Sandbakk, Ø. Strength determinants of jump height in the jump throw movement in women handball players. J Strength Cond Res XX(X): 000-000, 2018-The purpose of the study was to improve the understanding of the strength demands of a handball-specific jump through examining the associations between jump height in a jump throw jump (JTJ) and measures of lower-body maximum strength and impulse in handball players. For comparison, whether the associations between jump height and strength differed between the JTJ and the customarily used countermovement jump (CMJ) was also examined. Twenty women handball players from a Norwegian top division club participated in the study. Jump height was measured in the JTJ and in unilateral and bilateral CMJ. Lower-body strength (maximum isometric force, one-repetition maximum [1RM], impulse at ∼60% and ∼35% 1RM) was measured in seated leg press. The associations between jump height and strength were assessed with correlation analyses and t-tests of dependent r's were performed to determine if correlations differed between jump tests. Only impulse at ∼35% 1RM correlated significantly with JTJ height (p < 0.05), whereas all strength measures correlated significantly with CMJ heights (p < 0.001). The associations between jump height and strength were significantly weaker in the JTJ than in both CMJ tests for all strength measures (p = 0.001-0.044) except one. Maximum strength and impulse at ∼60% 1RM did not seem to sufficiently capture the capabilities associated with JTJ height, highlighting the importance of employing tests targeting performance-relevant neuromuscular characteristics when assessing jump-related strength in handball players. Further, CMJ height seemed to represent a wider range of strength capabilities and care should be taken when using it as a proxy for handball-specific movements.

Effects of inactivation of the anterior interpositus nucleus on the kinematic and dynamic control of multijoint movement.

PubMed

Cooper, S E; Martin, J H; Ghez, C

2000-10-01

We previously showed that inactivating the anterior interpositus nucleus in cats disrupts prehension; paw paths, normally straight and accurate, become curved, hypometric, and more variable. In the present study, we determined the joint kinematic and dynamic origins of this impairment. Animals were restrained in a hammock and trained to reach and grasp a cube of meat from a narrow food well at varied heights; movements were monitored using the MacReflex analysis system. The anterior interpositus nucleus was inactivated by microinjection of the GABA agonist muscimol (0.25-0.5 microgram in 0.5 microliter saline). For each joint, we computed the torque due to gravity, inertial resistance (termed self torque), interjoint interactions (termed interaction torque), and the combined effects of active muscle contraction and passive soft tissue stretch (termed generalized muscle torque). Inactivation produced significant reductions in the amplitude, velocity, and acceleration of elbow flexion. However, these movements continued to scale normally with target height. Shoulder extension was reduced by inactivation but wrist angular displacement and velocity were not. Inactivation also produced changes in the temporal coordination between elbow, shoulder, and wrist kinematics. Dynamic analysis showed that elbow flexion both before and during inactivation was produced by the combined action of muscle and interaction torque, but that the timing depended on muscle torque. Elbow interaction and muscle torques were scaled to target height both before and during inactivation. Inactivation produced significant reductions in elbow flexor interaction and muscle torques. The duration of elbow flexor muscle torque was prolonged to compensate for the reduction in flexor interaction torque. Shoulder extension was produced by extensor interaction and muscle torques both before and during inactivation. Inactivation produced a reduction in shoulder extension, primarily by reduced interaction torque, but without compensation. Wrist plantarflexion, which occurred during elbow flexion, was driven by plantarflexor interaction and gravitational torques both before and during inactivation. Muscle torque acted in the opposite direction with a phase lead to restrain the plantarflexor interaction torque. During inactivation, there was a reduction in plantarflexor interaction torque and a loss of the phase lead of the muscle torque. Our findings implicate the C1/C3 anterior interpositus zone of the cerebellum in the anticipatory control of intersegmental dynamics during reaching, which zone is required for coordinating the motions of the shoulder and wrist with those of the elbow. In contrast, this cerebellar zone does not play a role in scaling the movement to match a target.

Scaling Constraints in Junior Tennis: The Influence of Net Height on Skilled Players' Match-Play Performance

ERIC Educational Resources Information Center

Limpens, Vera; Buszard, Tim; Shoemaker, Emma; Savelsbergh, Geert J. P.; Reid, Machar

2018-01-01

Purpose: The net height in tennis (0.91 m) is approximately 50% of a professional tennis player's height. Children are also expected to play with this net height, even though it is approximately 70% of the average 10-year-old's height. This study examined the immediate effect of lowering net height on the performance characteristics of skilled…

Inference of the genetic architecture underlying BMI and height with the use of 20,240 sibling pairs.

PubMed

Hemani, Gibran; Yang, Jian; Vinkhuyzen, Anna; Powell, Joseph E; Willemsen, Gonneke; Hottenga, Jouke-Jan; Abdellaoui, Abdel; Mangino, Massimo; Valdes, Ana M; Medland, Sarah E; Madden, Pamela A; Heath, Andrew C; Henders, Anjali K; Nyholt, Dale R; de Geus, Eco J C; Magnusson, Patrik K E; Ingelsson, Erik; Montgomery, Grant W; Spector, Timothy D; Boomsma, Dorret I; Pedersen, Nancy L; Martin, Nicholas G; Visscher, Peter M

2013-11-07

Evidence that complex traits are highly polygenic has been presented by population-based genome-wide association studies (GWASs) through the identification of many significant variants, as well as by family-based de novo sequencing studies indicating that several traits have a large mutational target size. Here, using a third study design, we show results consistent with extreme polygenicity for body mass index (BMI) and height. On a sample of 20,240 siblings (from 9,570 nuclear families), we used a within-family method to obtain narrow-sense heritability estimates of 0.42 (SE = 0.17, p = 0.01) and 0.69 (SE = 0.14, p = 6 × 10(-)(7)) for BMI and height, respectively, after adjusting for covariates. The genomic inflation factors from locus-specific linkage analysis were 1.69 (SE = 0.21, p = 0.04) for BMI and 2.18 (SE = 0.21, p = 2 × 10(-10)) for height. This inflation is free of confounding and congruent with polygenicity, consistent with observations of ever-increasing genomic-inflation factors from GWASs with large sample sizes, implying that those signals are due to true genetic signals across the genome rather than population stratification. We also demonstrate that the distribution of the observed test statistics is consistent with both rare and common variants underlying a polygenic architecture and that previous reports of linkage signals in complex traits are probably a consequence of polygenic architecture rather than the segregation of variants with large effects. The convergent empirical evidence from GWASs, de novo studies, and within-family segregation implies that family-based sequencing studies for complex traits require very large sample sizes because the effects of causal variants are small on average. Copyright © 2013 The American Society of Human Genetics. Published by Elsevier Inc. All rights reserved.

Initiation of growth hormone therapy in idiopathic short stature: do gender differences exist?

PubMed

Ben-Ari, Tal; Lebenthal, Yael; Phillip, Moshe; Lazar, Liora

2015-01-01

Growth hormone (GH) registries indicate that boys receive preferential GH treatment for idiopathic short stature (ISS). The aim was to determine whether age, auxological parameters, pubertal status, and target height differ between genders at GH initiation. Review of the computerized files of the endocrine department of a tertiary pediatric medical center identified 184 patients who started GH therapy for ISS between 2003-2011. Data on auxologic parameters, predicted height, parental height, and pubertal status were collected and compared between boys and girls. Boys accounted for a significantly higher percentage of the study group (65.8%, p<0.001). At onset of GH therapy, there were no significant differences between boys and girls in age (10.2±3.1 vs. 9.9±2.4 years), height-standard deviation score (SDS) (-2.64±0.5 vs. -2.79±0.5), body mass index-SDS[(-0.65±1.01) vs. (-0.80±1.13)], or pubertal status (66% vs. 63.5% prepubertal). Predicted height-SDS was significantly higher in boys (-1.95±1.05 vs. -2.56±0.73, p<0.001). Midparental height-SDS was similar in the two groups, as were paternal and maternal height. The similar age, height deficit, and pubertal status at onset of GH treatment in boys and girls suggests that gender differences do not exist. Male predominance may stem from family preferences to treat boys. Future studies are warranted to assess the psychosocial aspects in the decision to initiate therapy.

Upgrades to the NOAA/NESDIS automated Cloud-Motion Vector system

NASA Technical Reports Server (NTRS)

Nieman, Steve; Menzel, W. Paul; Hayden, Christopher M.; Wanzong, Steve; Velden, Christopher S.

1993-01-01

The latest version of the automated cloud motion vector software has yielded significant improvements in the quality of the GOES cloud-drift winds produced operationally by NESDIS. Cloud motion vectors resulting from the automated system are now equal or superior in quality to those which had the benefit of manual quality control a few years ago. The single most important factor in this improvement has been the upgraded auto-editor. Improved tracer selection procedures eliminate targets in difficult regions and allow a higher target density and therefore enhanced coverage in areas of interest. The incorporation of the H2O-intercept height assignment method allows an adequate representation of the heights of semi-transparent clouds in the absence of a CO2-absorption channel. Finally, GOES-8 water-vapor motion winds resulting from the automated system are superior to any done previously by NESDIS and should now be considered as an operational product.

47 CFR 90.635 - Limitations on power and antenna height.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Limitations on power and antenna height. 90.635... and antenna height. (a) The effective radiated power and antenna height for base stations may not... justify power levels and antenna heights requested. (b) The maximum output power of the transmitter for...

47 CFR 90.635 - Limitations on power and antenna height.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Limitations on power and antenna height. 90.635... and antenna height. (a) The effective radiated power and antenna height for base stations may not... justify power levels and antenna heights requested. (b) The maximum output power of the transmitter for...

47 CFR 90.635 - Limitations on power and antenna height.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Limitations on power and antenna height. 90.635... and antenna height. (a) The effective radiated power and antenna height for base stations may not... justify power levels and antenna heights requested. (b) The maximum output power of the transmitter for...

47 CFR 90.635 - Limitations on power and antenna height.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Limitations on power and antenna height. 90.635... and antenna height. (a) The effective radiated power and antenna height for base stations may not... justify power levels and antenna heights requested. (b) The maximum output power of the transmitter for...

47 CFR 90.635 - Limitations on power and antenna height.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Limitations on power and antenna height. 90.635... and antenna height. (a) The effective radiated power and antenna height for base stations may not... justify power levels and antenna heights requested. (b) The maximum output power of the transmitter for...

The association between height and birth order: evidence from 652,518 Swedish men.

PubMed

Myrskylä, Mikko; Silventoinen, Karri; Jelenkovic, Aline; Tynelius, Per; Rasmussen, Finn

2013-07-01

Birth order is associated with outcomes such as birth weight and adult socioeconomic position (SEP), but little is known about the association with adult height. This potential birth order-height association is important because height predicts health, and because the association may help explain population-level height trends. We studied the birth order-height association and whether it varies by family characteristics or birth cohort. We used the Swedish Military Conscription Register to analyse adult height among 652,518 men born in 1951-1983 using fixed effects regression models that compare brothers and account for genetic and social factors shared by brothers. We stratified the analysis by family size, parental SEP and birth cohort. We compared models with and without birth weight and birth length controls. Unadjusted analyses showed no differences between the first two birth orders but in the fixed effects regression, birth orders 2, 3 and 4 were associated with 0.4, 0.7 and 0.8 cm (p<0.001 for each) shorter height than birth order 1, respectively. The associations were similar in large and small and high-SEP and low-SEP families, but were attenuated in recent cohorts. Birth characteristics did not explain these associations. Birth order is an important determinant of height. The height difference between birth orders 3 and 1 is larger than the population-level height increase achieved over 10 years. The attenuation of the effect over cohorts may reflect improvements in living standards. Decreases in family size may explain some of the secular-height increases in countries with decreasing fertility.

Critical windows for nutritional interventions against stunting.

PubMed

Prentice, Andrew M; Ward, Kate A; Goldberg, Gail R; Jarjou, Landing M; Moore, Sophie E; Fulford, Anthony J; Prentice, Ann

2013-05-01

An analysis of early growth patterns in children from 54 resource-poor countries in Africa and Southeast Asia shows a rapid falloff in the height-for-age z score during the first 2 y of life and no recovery until ≥5 y of age. This finding has focused attention on the period -9 to 24 mo as a window of opportunity for interventions against stunting and has garnered considerable political backing for investment targeted at the first 1000 d. These important initiatives should not be undermined, but the objective of this study was to counteract the growing impression that interventions outside of this period cannot be effective. We illustrate our arguments using longitudinal data from the Consortium of Health Oriented Research in Transitioning collaboration (Brazil, Guatemala, India, Philippines, and South Africa) and our own cross-sectional and longitudinal growth data from rural Gambia. We show that substantial height catch-up occurs between 24 mo and midchildhood and again between midchildhood and adulthood, even in the absence of any interventions. Longitudinal growth data from rural Gambia also illustrate that an extended pubertal growth phase allows very considerable height recovery, especially in girls during adolescence. In light of the critical importance of maternal stature to her children's health, our arguments are a reminder of the importance of the more comprehensive UNICEF/Sub-Committee on Nutrition Through the Life-Cycle approach. In particular, we argue that adolescence represents an additional window of opportunity during which substantial life cycle and intergenerational effects can be accrued. The regulation of such growth is complex and may be affected by nutritional interventions imposed many years previously.

Aflatoxin exposure in utero causes growth faltering in Gambian infants.

PubMed

Turner, Paul C; Collinson, Andrew C; Cheung, Yin Bun; Gong, Yunyun; Hall, Andrew J; Prentice, Andrew M; Wild, Christopher P

2007-10-01

Growth faltering in West African children has previously been associated with dietary exposure to aflatoxins, particularly upon weaning. However, in animal studies in utero exposure to low levels of aflatoxin also results in growth faltering. This study investigated the effect of in utero aflatoxin exposure on infant growth in the first year of life in The Gambia. Height and weight were measured for 138 infants at birth and at regular monthly intervals for one year. Aflatoxin-albumin (AF-alb) adduct level was measured in maternal blood during pregnancy, in cord blood and in infants at age 16 weeks. The geometric mean AF-alb levels were 40.4 pg/mg (range 4.8-260.8 pg/mg), 10.1 pg/mg (range 5.0-189.6 pg/mg) and 8.7 pg/mg (range 5.0-30.2 pg/mg) in maternal, cord and infant blood, respectively. AF-alb in maternal blood was a strong predictor of both weight (P = 0.012) and height (P = 0.044) gain, with lower gain in those with higher exposure. A reduction of maternal AF-alb from 110 pg/mg to 10 pg/mg would lead to a 0.8 kg increase in weight and 2 cm increase in height within the first year of life. This study shows a strong effect of maternal aflatoxin exposure during pregnancy on growth in the first year of life and thus extends earlier observations of an association between aflatoxin exposure during infancy and growth faltering. The findings imply value in targeting intervention strategies at early life exposures.

Evaluation of Radiation Exposure Hazard from Squaw Targets Used in Operations WIGWAM and HARDTACK-I

DTIC Science & Technology

2016-07-01

scale model submarine hulls (called “Squaws”) were built for the U.S. Navy in 1954 for use as submerged targets for hull -damage testing at Operation...2 Section 2. History of the Squaw Targets Three 4/5-scale model submarine hulls (called “Squaws”) were built in 1954 at the Long Beach Naval...dimensions of 135 ft in length, 23 ft in height, and 20.5 ft in breadth (Ross, 1955; NAVSHIPS, circa 1971). The Squaw hulls were to be used as submerged

The effect of economic status on height, insulin-like growth factor (IGF)-I and IGF binding protein-3 concentrations in healthy Turkish children.

PubMed

Turan, S; Bereket, A; Furman, A; Omar, A; Berber, M; Ozen, A; Akbenlioglu, C; Haklar, G

2007-06-01

The effect of economic status (ES) on growth, insulin-like growth factor (IGF)-I and IGF-binding protein (IGFBP)-3 in healthy children is not well characterized. We aimed to study the interrelationship between height, weight, IGF-I, IGFBP-3, mid-parental height (MPH) and ES. Eight hundred and fourteen healthy children (428 boys, 386 girls; age 3-18 years) were classified according to income of the families as low, middle and high. Standard deviation scores (SDSs) of height, weight, MPH, IGF-I and IGFBP-3 were compared between the groups. The combined effect of these parameters and ES on height SDS was investigated with complex statistical models. There was a significant trend for height and weight SDSs to increase with higher income levels in boys, but not in girls. Body mass index (BMI) SDSs were similar in three groups. There was a general trend for MPH SDS to increase with income levels in both sexes. In boys, IGF-I SDS was significantly higher in high ES group than low ES. In girls, IGFBP-3 SDSs were significantly higher in high ES group than in middle ES group. For both genders, height SDS was highly correlated with weight SDS and moderately correlated with BMI SDS, MPH SDS and IGF-1 SDS. All correlations were significant and positive. Complex models showed that MPH (19%), IGF-I (13%) and ES (3%) in boys, and MPH (16%) and IGF-I (7%) in girls have significant contribution to height SDSs. ES per se, independent of overt malnutrition, affects height, weight, IGF-I and IGFBP-3 with some gender differences in healthy children. Influence of income on height and weight show sexual dimorphism, a slight but significant effect is observed only in boys. MPH is the most prominent variable effecting height in healthy children. Higher height and MPH SDSs observed in higher income groups suggest that secular trend in growth still exists, at least in boys, in a country of favorable economic development.

Effect of Surface Roughness on Characteristics of Spherical Shock Waves

NASA Technical Reports Server (NTRS)

Huber, Paul W.; McFarland, Donald R.

1959-01-01

Measurements of peak overpressure and Mach stem height were made at four burst heights. Data were obtained with instrumentation capable of directly observing the variation of shock wave movement with time. Good similarity of free air shock peak overpressure with larger scale data was found to exist. The net effect of surface roughness on shock peak overpressures slightly. Surface roughness delayed the Mach stem formation at the greatest charge height and lowered the growth at all burst heights. A similarity parameter was found which approximately correlates the triple point path at different burst heights.

Morphology of Lonar Crater, India: Comparisons and implications

USGS Publications Warehouse

Fudali, R.F.; Milton, D.J.; Fredriksson, K.; Dube, A.

1980-01-01

Lonar Crater is a young meteorite impact crater emplaced in Deccan basalt. Data from 5 drillholes, a gravity network, and field mapping are used to reconstruct its original dimensions, delineate the nature of the pre-impact target rocks, and interpret the emplacement mode of the ejecta. Our estimates of the pre-erosion dimensions are: average diameter of 1710 m; average rim height of 40 m (30-35 m of rim rock uplift, 5-10 m of ejected debris); depth of 230-245 m (from rim crest to crater floor). The crater's circularity index is 0.9 and is unlikely to have been lower in the past. There are minor irregularities in the original crater floor (present sediment-breccia boundary) possibly due to incipient rebound effects. A continuous ejecta blanket extends an average of 1410 m beyond the pre-erosion rim crest. In general, 'fresh' terrestrial craters, less than 10 km in diameter, have smaller depth/diameter and larger rim height/diameter ratios than their lunar counterparts. Both ratios are intermediate for Mercurian craters, suggesting that crater shape is gravity dependent, all else being equal. Lonar demonstrates that all else is not always equal. Its depth/diameter ratio is normal but, because of less rim rock uplift, its rim height/diameter ratio is much smaller than both 'fresh' terrestrial and lunar impact craters. The target rock column at Lonar consists of one or more layers of weathered, soft basalt capped by fresh, dense flows. Plastic deformation and/or compaction of this lower, incompetent material probably absorbed much of the energy normally available in the cratering process for rim rock uplift. A variety of features within the ejecta blanket and the immediately underlying substrate, plus the broad extent of the blanket boundaries, suggest that a fluidized debris surge was the dominant mechanism of ejecta transportation and deposition at Lonar. In these aspects, Lonar should be a good analog for the 'fluidized craters' of Mars. ?? 1980 D. Reidel Publishing Co.

Target tracking and surveillance by fusing stereo and RFID information

NASA Astrophysics Data System (ADS)

Raza, Rana H.; Stockman, George C.

2012-06-01

Ensuring security in high risk areas such as an airport is an important but complex problem. Effectively tracking personnel, containers, and machines is a crucial task. Moreover, security and safety require understanding the interaction of persons and objects. Computer vision (CV) has been a classic tool; however, variable lighting, imaging, and random occlusions present difficulties for real-time surveillance, resulting in erroneous object detection and trajectories. Determining object ID via CV at any instance of time in a crowded area is computationally prohibitive, yet the trajectories of personnel and objects should be known in real time. Radio Frequency Identification (RFID) can be used to reliably identify target objects and can even locate targets at coarse spatial resolution, while CV provides fuzzy features for target ID at finer resolution. Our research demonstrates benefits obtained when most objects are "cooperative" by being RFID tagged. Fusion provides a method to simplify the correspondence problem in 3D space. A surveillance system can query for unique object ID as well as tag ID information, such as target height, texture, shape and color, which can greatly enhance scene analysis. We extend geometry-based tracking so that intermittent information on ID and location can be used in determining a set of trajectories of N targets over T time steps. We show that partial-targetinformation obtained through RFID can reduce computation time (by 99.9% in some cases) and also increase the likelihood of producing correct trajectories. We conclude that real-time decision-making should be possible if the surveillance system can integrate information effectively between the sensor level and activity understanding level.

Naturally together: pitch-height and brightness as coupled factors for eliciting the SMARC effect in non-musicians.

PubMed

Pitteri, Marco; Marchetti, Mauro; Priftis, Konstantinos; Grassi, Massimo

2017-01-01

Pitch-height is often labeled spatially (i.e., low or high) as a function of the fundamental frequency of the tone. This correspondence is highlighted by the so-called Spatial-Musical Association of Response Codes (SMARC) effect. However, the literature suggests that the brightness of the tone's timbre might contribute to this spatial association. We investigated the SMARC effect in a group of non-musicians by disentangling the role of pitch-height and the role of tone-brightness. In three experimental conditions, participants were asked to judge whether the tone they were listening to was (or was not) modulated in amplitude (i.e., vibrato). Participants were required to make their response in both the horizontal and the vertical axes. In a first condition, tones varied coherently in pitch (i.e., manipulation of the tone's F0) and brightness (i.e., manipulation of the tone's spectral centroid); in a second condition, pitch-height varied whereas brightness was fixed; in a third condition, pitch-height was fixed whereas brightness varied. We found the SMARC effect only in the first condition and only in the vertical axis. In contrast, we did not observe the effect in any of the remaining conditions. The present results suggest that, in non-musicians, the SMARC effect is not due to the manipulation of the pitch-height alone, but arises because of a coherent change of pitch-height and brightness; this effect emerges along the vertical axis only.

Genome-wide Analysis of Body Proportion Classifies Height-Associated Variants by Mechanism of Action and Implicates Genes Important for Skeletal Development

PubMed Central

Chan, Yingleong; Salem, Rany M.; Hsu, Yu-Han H.; McMahon, George; Pers, Tune H.; Vedantam, Sailaja; Esko, Tonu; Guo, Michael H.; Lim, Elaine T.; Franke, Lude; Smith, George Davey; Strachan, David P.; Hirschhorn, Joel N.

2015-01-01

Human height is a composite measurement, reflecting the sum of leg, spine, and head lengths. Many common variants influence total height, but the effects of these or other variants on the components of height (body proportion) remain largely unknown. We studied sitting height ratio (SHR), the ratio of sitting height to total height, to identify such effects in 3,545 African Americans and 21,590 individuals of European ancestry. We found that SHR is heritable: 26% and 39% of the total variance of SHR can be explained by common variants in European and African Americans, respectively, and global European admixture is negatively correlated with SHR in African Americans (r2 ≈ 0.03). Six regions reached genome-wide significance (p < 5 × 10−8) for association with SHR and overlapped biological candidate genes, including TBX2 and IGFBP3. We found that 130 of 670 height-associated variants are nominally associated (p < 0.05) with SHR, more than expected by chance (p = 5 × 10−40). At these 130 loci, the height-increasing alleles are associated with either a decrease (71 loci) or increase (59 loci) in SHR, suggesting that different height loci disproportionally affect either leg length or spine/head length. Pathway analyses via DEPICT revealed that height loci affecting SHR, and especially those affecting leg length, show enrichment of different biological pathways (e.g., bone/cartilage/growth plate pathways) than do loci with no effect on SHR (e.g., embryonic development). These results highlight the value of using a pair of related but orthogonal phenotypes, in this case SHR with height, as a prism to dissect the biology underlying genetic associations in polygenic traits and diseases. PMID:25865494

Integrated analysis of mRNA and miRNA expression profiling in rice backcrossed progenies (BC2F12) with different plant height

PubMed Central

Cao, Aqin; Jin, Jie; Li, Shaoqing

2017-01-01

Inter-specific hybridization and backcrossing commonly occur in plants. The use of progeny generated from inter-specific hybridization and backcrossing has been developed as a novel model system to explore gene expression divergence. The present study investigated the analysis of gene expression and miRNA regulation in backcrossed introgression lines constructed from cultivated and wild rice. High-throughput sequencing was used to compare gene and miRNA expression profiles in three progeny lines (L1710, L1817 and L1730), with different plant heights resulting from the backcrossing of introgression lines (BC2F12) and their parents (O. sativa and O. longistaminata). A total of 25,387 to 26,139 mRNAs and 379 to 419 miRNAs were obtained in these rice lines. More differentially expressed genes and miRNAs were detected in progeny/O. longistaminata comparison groups than in progeny/O. sativa comparison groups. Approximately 80% of the genes and miRNAs showed expression level dominance to O. sativa, indicating that three progeny lines were closer to the recurrent parent, which might be influenced by their parental genome dosage. Approximately 16% to 64% of the differentially expressed miRNAs possessing coherent target genes were predicted, and many of these miRNAs regulated multiple target genes. Most genes were up-regulated in progeny lines compared with their parents, but down-regulated in the higher plant height line in the comparison groups among the three progeny lines. Moreover, certain genes related to cell walls and plant hormones might play crucial roles in the plant height variations of the three progeny lines. Taken together, these results provided valuable information on the molecular mechanisms of hybrid backcrossing and plant height variations based on the gene and miRNA expression levels in the three progeny lines. PMID:28859136

Bas-relief generation using adaptive histogram equalization.

PubMed

Sun, Xianfang; Rosin, Paul L; Martin, Ralph R; Langbein, Frank C

2009-01-01

An algorithm is presented to automatically generate bas-reliefs based on adaptive histogram equalization (AHE), starting from an input height field. A mesh model may alternatively be provided, in which case a height field is first created via orthogonal or perspective projection. The height field is regularly gridded and treated as an image, enabling a modified AHE method to be used to generate a bas-relief with a user-chosen height range. We modify the original image-contrast-enhancement AHE method to use gradient weights also to enhance the shape features of the bas-relief. To effectively compress the height field, we limit the height-dependent scaling factors used to compute relative height variations in the output from height variations in the input; this prevents any height differences from having too great effect. Results of AHE over different neighborhood sizes are averaged to preserve information at different scales in the resulting bas-relief. Compared to previous approaches, the proposed algorithm is simple and yet largely preserves original shape features. Experiments show that our results are, in general, comparable to and in some cases better than the best previously published methods.

An empirical determination of the effects of sea state bias on Seasat altimetry

NASA Technical Reports Server (NTRS)

Born, G. H.; Richards, M. A.; Rosborough, G. W.

1982-01-01

A linear empirical model has been developed for the correction of sea state bias effects, in Seasat altimetry data altitude measurements, that are due to (1) electromagnetic bias caused by the fact that ocean wave troughs reflect the altimeter signal more strongly than the crests, shifting the apparent mean sea level toward the wave troughs, and (2) an independent instrument-related bias resulting from the inability of height corrections applied in the ground processor to compensate for simplifying assumptions made for the processor aboard Seasat. After applying appropriate corrections to the altimetry data, an empirical model for the sea state bias is obtained by differencing significant wave height and height measurements from coincident ground tracks. Height differences are minimized by solving for the coefficient of a linear relationship between height differences and wave height differences that minimize the height differences. In more than 50% of the 36 cases examined, 7% of the value of significant wave height should be subtracted for sea state bias correction.

X-Ray Source Heights in a Solar Flare: Thick-Target Versus Thermal Conduction Front Heating

NASA Technical Reports Server (NTRS)

Reep, J. W.; Bradshaw, S. J.; Holman, G. D.

2016-01-01

Observations of solar flares with RHESSI have shown X-ray sources traveling along flaring loops, from the corona down to the chromosphere and back up. The 2002 November 28 C1.1 flare, first observed with RHESSI by Sui et al. and quantitatively analyzed by O'Flannagain et al., very clearly shows this behavior. By employing numerical experiments, we use these observations of X-ray source height motions as a constraint to distinguish between heating due to a non-thermal electron beam and in situ energy deposition in the corona. We find that both heating scenarios can reproduce the observed light curves, but our results favor non-thermal heating. In situ heating is inconsistent with the observed X-ray source morphology and always gives a height dispersion with photon energy opposite to what is observed.

Maple prepared organic heterostructures for photovoltaic applications

NASA Astrophysics Data System (ADS)

Stanculescu, A.; Socol, M.; Socol, G.; Mihailescu, I. N.; Girtan, M.; Stanculescu, F.

2011-09-01

In this study, we present the deposition of ZnPc, Alq3, and PTCDA thin films using Matrix Assisted Pulsed Laser Evaporation (MAPLE) technique. We also report the realisation of multilayer structures, made by the successive application of MAPLE. The films have been characterized by spectroscopic (UV-VIS and Photoluminescence) and microscopic (SEM and AFM) methods, and the effect of different deposition conditions such as fluence, number of pulses, and target concentration on the properties has been analysed. This paper also presents some investigations on the electrical conduction in sandwich type structures ITO or Si/organic layer/Au or Cu and ITO/double organic layer/Cu, emphasising the dominant effect of the height of the energetic barriers at the inorganic/organic and organic/organic interfaces.

Genetic determination of height-mediated mate choice.

PubMed

Tenesa, Albert; Rawlik, Konrad; Navarro, Pau; Canela-Xandri, Oriol

2016-01-19

Numerous studies have reported positive correlations among couples for height. This suggests that humans find individuals of similar height attractive. However, the answer to whether the choice of a mate with a similar phenotype is genetically or environmentally determined has been elusive. Here we provide an estimate of the genetic contribution to height choice in mates in 13,068 genotyped couples. Using a mixed linear model we show that 4.1% of the variation in the mate height choice is determined by a person's own genotype, as expected in a model where one's height determines the choice of mate height. Furthermore, the genotype of an individual predicts their partners' height in an independent dataset of 15,437 individuals with 13% accuracy, which is 64% of the theoretical maximum achievable with a heritability of 0.041. Theoretical predictions suggest that approximately 5% of the heritability of height is due to the positive covariance between allelic effects at different loci, which is caused by assortative mating. Hence, the coupling of alleles with similar effects could substantially contribute to the missing heritability of height. These estimates provide new insight into the mechanisms that govern mate choice in humans and warrant the search for the genetic causes of choice of mate height. They have important methodological implications and contribute to the missing heritability debate.

The effectiveness of platform screen doors for the prevention of subway suicides in South Korea.

PubMed

Chung, Yong Woon; Kang, Sung Jin; Matsubayashi, Tetsuya; Sawada, Yasuyuki; Ueda, Michiko

2016-04-01

Subway suicide can significantly impact the general public. Platform Screen Doors (PSDs) are considered to be an effective strategy to prevent suicides at subway stations, but the evidence on their effectiveness is limited. We assessed the effectiveness of installing half- and full-height platform screen doors in reducing subway suicides using Poisson regression analysis. Ten-year monthly panel data for 121 subway stations between 2003 and 2012 in the Seoul metropolitan area were used for the analysis. We found that installing PSDs decreases fatal suicide cases by 89% (95% CI: 57-97%). We also found that the installation of full-height PSDs resulted in the elimination of subway suicides by completely blocking access to the track area; however, half-height PSDs, which do not extend to the ceiling of the platform, were not as effective as full-height ones. Our findings were based on the data from a single subway operator for a limited period of time. Accordingly, we did not consider the possibility that some passengers choose to die at a station run by other operators. Our study did not examine the potential substitution effects of other suicide methods. Installing physical barriers at subway stations can be an effective strategy to reduce the number of subway suicides; however, half-height PSDs are not as effective as full-height ones, even when they are as high as the height of an adult. Thus, these barriers should be made high enough so that nobody can climb over them. Copyright © 2016 Elsevier B.V. All rights reserved.

Does Shoe Collar Height Influence Ankle Joint Kinematics and Kinetics in Sagittal Plane Maneuvers?

PubMed Central

Yang, Yang; Fang, Ying; Zhang, Xini; He, Junliang; Fu, Weijie

2017-01-01

The Objective of the study is to investigate the effects of basketball shoes with different collar heights on ankle kinematics and kinetics and athletic performance in different sagittal plane maneuvers. Twelve participants who wore high-top and low-top basketball shoes (hereafter, HS and LS, respectively) performed a weight-bearing dorsiflexion (WB-DF) maneuver, drop jumps (DJs), and lay-up jumps (LJs). Their sagittal plane kinematics and ground reaction forces were recorded using the Vicon motion capture system and Kistler force plates simultaneously. Moreover, ankle dorsiflexion and plantarflexion angles, moment, power, stiffness, and jump height were calculated. In the WB-DF test, the peak ankle dorsiflexion angle (p = 0.041) was significantly smaller in HS than in LS. Additionally, the peak ankle plantarflexion moment (p = 0.028) and power (p = 0.022) were significantly lower in HS than in LS during LJs but not during DJs. In both jumping maneuvers, no significant differences were found in the jump height or ankle kinematics between the two shoe types. According to the WB-DF test, increasing shoe collar height can effectively reduce the ankle range of motion in the sagittal plane. Although the HS did not restrict the flexion–extension performance of the ankle joint during two jumping maneuvers, an increased shoe collar height can reduce peak ankle plantarflexion moment and peak power during the push-off phase in LJs. Therefore, a higher shoe collar height should be used to circumvent effects on the partial kinetics of the ankle joint in the sagittal plane. Key points An increased shoe collar height effectively reduced ankle joint ROM in the sagittal plane in weight-bearing dorsiflexion maneuver. Shoe collar height did not affect sagittal plane ankle kinematics and had no effect on performance during realistic jumping. Shoe collar height can affect the ankle plantarflexion torque and peak power during the push-off phase in lay-up jump. PMID:29238255

EUV laser produced and induced plasmas for nanolithography

NASA Astrophysics Data System (ADS)

Sizyuk, Tatyana; Hassanein, Ahmed

2017-10-01

EUV produced plasma sources are being extensively studied for the development of new technology for computer chips production. Challenging tasks include optimization of EUV source efficiency, producing powerful source in 2 percentage bandwidth around 13.5 nm for high volume manufacture (HVM), and increasing the lifetime of collecting optics. Mass-limited targets, such as small droplet, allow to reduce contamination of chamber environment and mirror surface damage. However, reducing droplet size limits EUV power output. Our analysis showed the requirement for the target parameters and chamber conditions to achieve 500 W EUV output for HVM. The HEIGHTS package was used for the simulations of laser produced plasma evolution starting from laser interaction with solid target, development and expansion of vapor/plasma plume with accurate optical data calculation, especially in narrow EUV region. Detailed 3D modeling of mix environment including evolution and interplay of plasma produced by lasers from Sn target and plasma produced by in-band and out-of-band EUV radiation in ambient gas, used for the collecting optics protection and cleaning, allowed predicting conditions in entire LPP system. Effect of these conditions on EUV photon absorption and collection was analyzed. This work is supported by the National Science Foundation, PIRE project.

Gibberellin in plant height control: old player, new story.

PubMed

Wang, Yijun; Zhao, Jia; Lu, Wenjie; Deng, Dexiang

2017-03-01

Height relates to plant architecture, lodging resistance, and yield performance. Growth-promoting phytohormones gibberellins (GAs) play a pivotal role in plant height control. Mutations in GA biosynthesis, metabolism, and signaling cascades influence plant height. Moreover, GA interacts with other phytohormones in the modulation of plant height. Here, we first briefly describe the regulation of plant height by altered GA pathway. Then, we depict effects of the crosstalk between GA and other phytohormones on plant height. We also dissect the co-localization of GA pathway genes and established quantitative genetic loci for plant height. Finally, we suggest ways forward for the application of hormone GA knowledge in breeding of crops with plant height ideotypes.

A mixed-effects height-diameter model for cottonwood in the Mississippi Delta

Treesearch

Curtis L. VanderSchaaf; H. Christoph Stuhlinger

2012-01-01

Eastern cottonwood (Populus deltoides Bartr. ex Marsh.) has been artificially regenerated throughout the Mississippi Delta region because of its fast growth and is being considered for biofuel production.This paper presents a mixed-effects height-diameter model for cottonwood in the Mississippi Delta region. After obtaining height-diameter...

The Effect of Backward-Facing Step Height on Instability Growth and Breakdown in Swept Wing Boundary-Layer Transition

NASA Technical Reports Server (NTRS)

Eppink, Jenna L.; Wlezien, Richard W.; King, Rudolph A.; Choudhari, Meelan

2015-01-01

A low-speed experiment was performed on a swept at plate model with an imposed pressure gradient to determine the effect of a backward-facing step on transition in a stationary-cross flow dominated flow. Detailed hot-wire boundary-layer measurements were performed for three backward-facing step heights of approximately 36, 45, and 49% of the boundary-layer thickness at the step. These step heights correspond to a subcritical, nearly-critical, and critical case. Three leading-edge roughness configurations were tested to determine the effect of stationary-cross flow amplitude on transition. The step caused a local increase in amplitude of the stationary cross flow for the two larger step height cases, but farther downstream the amplitude decreased and remained below the baseline amplitude. The smallest step caused a slight local decrease in amplitude of the primary stationary cross flow mode, but the amplitude collapsed back to the baseline case far downstream of the step. The effect of the step on the amplitude of the primary cross flow mode increased with step height, however, the stationary cross flow amplitudes remained low and thus, stationary cross flow was not solely responsible for transition. Unsteady disturbances were present downstream of the step for all three step heights, and the amplitudes increased with increasing step height. The only exception is that the lower frequency (traveling crossflow-like) disturbance was not present in the lowest step height case. Positive and negative spikes in instantaneous velocity began to occur for the two larger step height cases and then grew in number and amplitude downstream of reattachment, eventually leading to transition. The number and amplitude of spikes varied depending on the step height and cross flow amplitude. Despite the low amplitude of the disturbances in the intermediate step height case, breakdown began to occur intermittently and the flow underwent a long transition region.

Workload of horses on a water treadmill: effect of speed and water height on oxygen consumption and cardiorespiratory parameters.

PubMed

Greco-Otto, Persephone; Bond, Stephanie; Sides, Raymond; Kwong, Grace P S; Bayly, Warwick; Léguillette, Renaud

2017-11-28

Despite the use of water treadmills (WT) in conditioning horses, the intensity of WT exercise has not been well documented. The workload on a WT is a function of water height and treadmill speed. Therefore, the purpose of this study was to determine the effects of these factors on workload during WT exercise. Fifteen client-owned Quarter Horses were used in a randomized, controlled study. Three belt speeds and three water heights (mid cannon, carpus and stifle), along with the control condition (dry treadmill, all three speeds), were tested. Measured outcomes were oxygen consumption (V̇O 2 ), ventilation (respiratory frequency, tidal volume (V T )), heart rate (HR), and blood lactate. An ergospirometry system was used to measure V̇O 2 and ventilation. Linear mixed effects models were used to examine the effects of presence or absence of water, water height and speed (as fixed effects) on measured outcomes. Water height and its interaction with speed had a significant effect on V̇O 2 , V T and HR, all peaking at the highest water level and speed (stifle at 1.39 m/s, median V̇O 2  = 16.70 ml/(kg.min), V T  = 6 L, HR = 69 bpm). Respiratory frequency peaked with water at the carpus at 1.39 m/s (median 49 breaths/min). For a given water height, the small increments in speed did not affect the measured outcomes. Post-exercise blood lactate concentration did not change. Varying water height and speed affects the workload associated with WT exercise. The conditions utilized in this study were associated with low intensity exercise. Water height had a greater impact on exercise intensity than speed.

Height-age and height-diameter relationships for monocultures and mixtures of eastern cottonwood clones

Treesearch

Steven A. Knowe; G. Sam Foster; Randall J. Rousseau; Warren L Nance

1998-01-01

Data from an eastern cottonwood clonal mixing study in Mississippi and Kentucky, USA, were used to test the effects of planting locations and genetics (clonal proportions) on height-age and height-d.b.h. functions. Planting locations, which accounted for 5.6 percent of the variation in observed dominant height growth (p = 0.0001), were more important than clonal...

Analysis of vertical distributions and effective flight layers of insects: three-dimensional simulation of flying insects and catch at trap heights

USDA-ARS?s Scientific Manuscript database

The mean height and standard deviation (SD) of flight is calculated for over 100 insect species from their catches on trap heights reported in the literature. The iterative equations for calculating mean height and SD are presented. The mean flight height for 95% of the studies varied from 0.17 to 5...

Anatomy of the larynx and pharynx: effects of age, gender and height revealed by multidetector computed tomography.

PubMed

Inamoto, Y; Saitoh, E; Okada, S; Kagaya, H; Shibata, S; Baba, M; Onogi, K; Hashimoto, S; Katada, K; Wattanapan, P; Palmer, J B

2015-09-01

Although oropharyngeal and laryngeal structures are essential for swallowing, the three-dimensional (3D) anatomy is not well understood, due in part to limitations of available measuring techniques. This study uses 3D images acquired by 320-row area detector computed tomography ('320-ADCT'), to measure the pharynx and larynx and to investigate the effects of age, gender and height. Fifty-four healthy volunteers (30 male, 24 female, 23-77 years) underwent one single-phase volume scan (0.35 s) with 320-ADCT during resting tidal breathing. Six measurements of the pharynx and two of larynx were performed. Bivariate statistical methods were used to analyse the effects of gender, age and height on these measurements. Length and volume were significantly larger for men than for women for every measurement (P < 0.05) and increased with height (P < 0.05). Multiple regression analysis was performed to understand the interactions of gender, height and age. Gender, height and age each had significant effects on certain values. The volume of the larynx and hypopharynx was significantly affected by height and age. The length of pharynx was associated with gender and age. Length of the vocal folds and distance from the valleculae to the vocal folds were significantly affected by gender (P < 0.05). These results suggest that age, gender and height have independent and interacting effects on the morphology of the pharynx and larynx. Three-dimensional imaging and morphometrics using 320-ADCT are powerful tools for efficiently and reliably observing and measuring the pharynx and larynx. © 2015 John Wiley & Sons Ltd.

Growth of ponderosa pine seedlings as affected by air pollution

NASA Astrophysics Data System (ADS)

Momen, B.; Anderson, P. D.; Houpis, J. L. J.; Helms, J. A.

The effect of air pollution on seedling survival and competitive ability is important to natural and artificial regeneration of forest trees. Although biochemical and physiological processes are sensitive indicators of pollution stress, the cumulative effects of air pollutants on seedling vigor and competitive ability may be assessed directly from whole-plant growth characteristics such as diameter, height, and photosynthetic area. A few studies that have examined intraspecific variation in seedling response to air pollution indicate that genotypic differences are important in assessing potential effects of air pollution on forest regeneration. Here, we studied the effects of acid rain (no-rain, pH 5.1 rain, pH 3.0 rain) and ozone (filtered, ambient, twice-ambient) in the field on height, diameter, volume, the height:diameter ratio, maximum needle length, and time to reach maximum needle length in seedlings of three families of ponderosa pine ( Pinus ponderosa Dougl. ex Laws). Seedling diameter, height, volume, and height:diameter ratio related significantly to their pre-treatment values. Twice-ambient ozone decreased seedling diameter compared with ozone-filtered air. A significant family-by-ozone interaction was detected for seedling height, as the height of only one of the three families was decreased by twice-ambient ozone compared with the ambient level. Seedling diameter was larger and the height:diameter ratio was smaller under pH 3.0 rain compared to either the no-rain or the pH 5.1-rain treatment. This suggests greater seedling vigor, perhaps due to a foliar fertilization effect of the pH 3.0 rain.

Genetic control of plant height in European winter wheat cultivars.

PubMed

Würschum, Tobias; Langer, Simon M; Longin, C Friedrich H

2015-05-01

Plant height variation in European winter wheat cultivars is mainly controlled by the Rht - D1 and Rht - B1 semi-dwarfing genes, but also by other medium- or small-effect QTL and potentially epistatic QTL enabling fine adjustments of plant height. Plant height is an important goal in wheat (Triticum aestivum L.) breeding as it affects crop performance and thus yield and quality. The aim of this study was to investigate the genetic control of plant height in European winter wheat cultivars. To this end, a panel of 410 winter wheat varieties from across Europe was evaluated for plant height in multi-location field trials and genotyped for the candidate loci Rht-B1, Rht-D1, Rht8, Ppd-B1 copy number variation and Ppd-D1 as well as by a genotyping-by-sequencing approach yielding 23,371 markers with known map position. We found that Rht-D1 and Rht-B1 had the largest effects on plant height in this cultivar collection explaining 40.9 and 15.5% of the genotypic variance, respectively, while Ppd-D1 and Rht8 accounted for 3.0 and 2.0% of the variance, respectively. A genome-wide scan for marker-trait associations yielded two additional medium-effect QTL located on chromosomes 6A and 5B explaining 11.0 and 5.7% of the genotypic variance after the effects of the candidate loci were accounted for. In addition, we identified several small-effect QTL as well as epistatic QTL contributing to the genetic architecture of plant height. Taken together, our results show that the two Rht-1 semi-dwarfing genes are the major sources of variation in European winter wheat cultivars and that other small- or medium-effect QTL and potentially epistatic QTL enable fine adjustments in plant height.

Geographical Distribution of Adolescent Body Height with Respect to Effective Day Length in Japan: An Ecological Analysis

PubMed Central

Yokoya, Masana; Shimizu, Hideyasu; Higuchi, Yukito

2012-01-01

The height of Japanese youth raised in the northern region tends to be greater than that of youth raised in the southern region; therefore, a geographical gradient in youth body height exists. Although this gradient has existed for about 100 years, the reasons for it remain unclear. Consideration of the nutritional improvement, economic growth, and intense migration that has occurred in this period indicates that it is probably the result of environmental rather than nutritional or genetic factors. To identify possible environmental factors, ecological analysis of prefecture-level data on the body size of 8- to 17-year-old youth averaged over a 13-year period (1996 to 2008) and Japanese mesh climatic data on the climatic variables of temperature, solar radiation, and effective day length (duration of photoperiod exceeding the threshold of light intensity) was performed. The geographical distribution of the standardized height of Japanese adolescents was found to be inversely correlated to a great extent with the distribution of effective day length at a light intensity greater than 4000 lx. The results of multiple regression analysis of effective day length, temperature, and weight (as an index of food intake) indicated that a combination of effective day length and weight was statistically significant as predictors of height in early adolescence; however, only effective day length was statistically significant as a predictor of height in late adolescence. Day length may affect height by affecting the secretion of melatonin, a hormone that inhibits sexual and skeletal maturation, which in turn induces increases in height. By affecting melatonin production, regional differences in the duration of the photoperiod may lead to regional differences in height. Exposure to light intensity greater than 4000 lx appears to be the threshold at which light intensity begins to affect the melatonin secretion of humans who spend much of their time indoors. PMID:23227226

Optical monitoring of ion beam Y-Ba-Cu-O sputtering

NASA Astrophysics Data System (ADS)

Klein, J. D.; Yen, A.

1990-11-01

The emission spectra resulting from ion beam sputtering a Y-Ba-Cu-O target were observed as a function of beam voltage and beam current. The spectra were relatively clean with several peaks readily attributed to each of Y, Ba, and Ar. Monitoring of copper and oxygen was more difficult with a single CuO peak and one O peak evident. The intensities of the cation peaks were linear with respect to beam voltage above 400 V. Since target current was found not to be directly proportional to beam current, target power was defined as the product of beam voltage and target current. The response of cation peak height to changes in target power was linear and similar for variations of either beam voltage or target current.

A new mode of fear expression: perceptual bias in height fear.

PubMed

Teachman, Bethany A; Stefanucci, Jeanine K; Clerkin, Elise M; Cody, Meghan W; Proffitt, Dennis R

2008-04-01

Emotion and psychopathology researchers have described the fear response as consisting of four main components--subjective affect, physiology, cognition, and behavior. The current study provides evidence for an additional component in the domain of height fear (perception) and shows that it is distinct from measures of cognitive processing. Individuals High (N = 35) and Low (N = 36) in acrophobic symptoms looked over a two-story balcony ledge and estimated its vertical extent using a direct height estimation task (visual matching), and an indirect task (size estimation); the latter task seems to exhibit little influence from cognitive factors. In addition, implicit and explicit measures of cognitive processing were obtained. Results indicated that, as expected, the High Fear group showed greater relative, implicit height fear associations and explicit threat cognitions. Of primary interest, the High (compared to Low) Fear group estimated the vertical extent to be higher, and judged target sizes to be greater, even when controlling for the cognitive bias measures. These results suggest that emotional factors such as fear are related to perception. (Copyright) 2008 APA.

A revised calibration of the interferometric mode of the CryoSat-2 radar altimeter improves ice height and height change measurements in western Greenland

NASA Astrophysics Data System (ADS)

Gray, Laurence; Burgess, David; Copland, Luke; Dunse, Thorben; Langley, Kirsty; Moholdt, Geir

2017-05-01

We compare geocoded heights derived from the interferometric mode (SARIn) of CryoSat to surface heights from calibration-validation sites on Devon Ice Cap and western Greenland. Comparisons are included for both the heights derived from the first return (the point-of-closest-approach or POCA) and heights derived from delayed waveform returns (swath processing). While swath-processed heights are normally less precise than edited POCA heights, e.g. standard deviations of ˜ 3 and ˜ 1.5 m respectively for the western Greenland site, the increased coverage possible with swath data complements the POCA data and provides useful information for both system calibration and improving digital elevation models (DEMs). We show that the pre-launch interferometric baseline coupled with an additional roll correction ( ˜ 0.0075° ± 0.0025°), or equivalent phase correction ( ˜ 0.0435 ± 0.0145 radians), provides an improved calibration of the interferometric SARIn mode. We extend the potential use of SARIn data by showing the influence of surface conditions, especially melt, on the return waveforms and that it is possible to detect and measure the height of summer supraglacial lakes in western Greenland. A supraglacial lake can provide a strong radar target in the waveform, stronger than the initial POCA return, if viewed at near-normal incidence. This provides an ideal situation for swath processing and we demonstrate a height precision of ˜ 0.5 m for two lake sites, one in the accumulation zone and one in the ablation zone, which were measured every year from 2010 or 2011 to 2016. Each year the lake in the ablation zone was viewed in June by ascending passes and then 5.5 days later by descending passes, which allows an approximate estimate of the filling rate. The results suggest that CryoSat waveform data and measurements of supraglacial lake height change could complement the use of optical satellite imagery and be helpful as proxy indicators for surface melt around Greenland.

Modeling Aboveground Biomass in Hulunber Grassland Ecosystem by Using Unmanned Aerial Vehicle Discrete Lidar

PubMed Central

Wang, Dongliang; Xin, Xiaoping; Shao, Quanqin; Brolly, Matthew; Zhu, Zhiliang; Chen, Jin

2017-01-01

Accurate canopy structure datasets, including canopy height and fractional cover, are required to monitor aboveground biomass as well as to provide validation data for satellite remote sensing products. In this study, the ability of an unmanned aerial vehicle (UAV) discrete light detection and ranging (lidar) was investigated for modeling both the canopy height and fractional cover in Hulunber grassland ecosystem. The extracted mean canopy height, maximum canopy height, and fractional cover were used to estimate the aboveground biomass. The influences of flight height on lidar estimates were also analyzed. The main findings are: (1) the lidar-derived mean canopy height is the most reasonable predictor of aboveground biomass (R2 = 0.340, root-mean-square error (RMSE) = 81.89 g·m−2, and relative error of 14.1%). The improvement of multiple regressions to the R2 and RMSE values is unobvious when adding fractional cover in the regression since the correlation between mean canopy height and fractional cover is high; (2) Flight height has a pronounced effect on the derived fractional cover and details of the lidar data, but the effect is insignificant on the derived canopy height when the flight height is within the range (<100 m). These findings are helpful for modeling stable regressions to estimate grassland biomass using lidar returns. PMID:28106819

Modeling Aboveground Biomass in Hulunber Grassland Ecosystem by Using Unmanned Aerial Vehicle Discrete Lidar.

PubMed

Wang, Dongliang; Xin, Xiaoping; Shao, Quanqin; Brolly, Matthew; Zhu, Zhiliang; Chen, Jin

2017-01-19

Accurate canopy structure datasets, including canopy height and fractional cover, are required to monitor aboveground biomass as well as to provide validation data for satellite remote sensing products. In this study, the ability of an unmanned aerial vehicle (UAV) discrete light detection and ranging (lidar) was investigated for modeling both the canopy height and fractional cover in Hulunber grassland ecosystem. The extracted mean canopy height, maximum canopy height, and fractional cover were used to estimate the aboveground biomass. The influences of flight height on lidar estimates were also analyzed. The main findings are: (1) the lidar-derived mean canopy height is the most reasonable predictor of aboveground biomass ( R ² = 0.340, root-mean-square error (RMSE) = 81.89 g·m -2 , and relative error of 14.1%). The improvement of multiple regressions to the R ² and RMSE values is unobvious when adding fractional cover in the regression since the correlation between mean canopy height and fractional cover is high; (2) Flight height has a pronounced effect on the derived fractional cover and details of the lidar data, but the effect is insignificant on the derived canopy height when the flight height is within the range (<100 m). These findings are helpful for modeling stable regressions to estimate grassland biomass using lidar returns.

Height premium for job performance.

PubMed

Kim, Tae Hyun; Han, Euna

2017-08-01

This study assessed the relationship of height with wages, using the 1998 and 2012 Korean Labor and Income Panel Study data. The key independent variable was height measured in centimeters, which was included as a series of dummy indicators of height per 5cm span (<155cm, 155-160cm, 160-165cm, and ≥165cm for women; <165cm, 165-170cm, 170-175cm, 175-180cm, and ≥180cm for men). We controlled for household- and individual-level random effects. We used a random-effect quantile regression model for monthly wages to assess the heterogeneity in the height-wage relationship, across the conditional distribution of monthly wages. We found a non-linear relationship of height with monthly wages. For men, the magnitude of the height wage premium was overall larger at the upper quantile of the conditional distribution of log monthly wages than at the median to low quantile, particularly in professional and semi-professional occupations. The height-wage premium was also larger at the 90th quantile for self-employed women and salaried men. Our findings add a global dimension to the existing evidence on height-wage premium, demonstrating non-linearity in the association between height and wages and heterogeneous changes in the dispersion and direction of the association between height and wages, by wage level. Copyright © 2017 Elsevier B.V. All rights reserved.

Homogamy and imprinting-like effect on mate choice preference for body height in the current Japanese population.

PubMed

Seki, Motohide; Ihara, Yasuo; Aoki, Kenichi

2012-01-01

Homogamy for body height has been repeatedly documented in Western societies. Nevertheless, the underlying mechanism is unclear and the reasons for its apparent absence in non-Western societies remain unexplained. This study investigates spousal correlation and mate preference for height in the Japanese population. This study analyses self-reported data on the height of individuals, their parents and their ideal marriage partners, collected by a series of questionnaires on university students. In contrast to a previous study, this study found a significant positive correlation between the heights of Japanese spouses, after controlling for age. It also found a positive correlation between the heights of subjects and of their ideal partners, suggesting that an individual's self-referent preference may contribute to the observed homogamy for height. However, a subject's preference is also influenced by the height of his/her opposite-sex--but not same-sex--parent, where this effect is more prominent in male subjects. This study shows that homogamy for body height is present in the current Japanese population and that it may in part result from an individual's preference. It also indicates a possible role of a sexual imprinting-like mechanism in human mate choice.

Crown development in a pioneer tree, Rhus trichocarpa, in relation to the structure and growth of individual branches.

PubMed

Osada, Noriyuki

2006-01-01

Based on an allometric reconstruction, the structure and biomass-allocation patterns of branches and current-year shoots were investigated in branches of various heights in the pioneer tree Rhus trichocarpa, to evaluate how crown development is achieved and limited in association with height. Path analysis was conducted to explore the effects of light availability, basal height and size of individual branches on branch structure and growth. Branch angle was affected by basal height, whereas branch mass was influenced primarily by light availability. This result suggests that branch structure is strongly constrained by basal height, and that trees mediate such constraints under different light environments. Previous-year leaf area and light availability showed positive effects on current-year stem mass. In contrast, branch basal height and mass negatively affected current-year stem mass. Moreover, the length of stems of a given diameter decreased with increasing branch height. Therefore the cost of biomass investment for a unit growth in length is greater for branches of larger size and at upper positions. Vertical growth rate in length decreased with increasing height. Height-dependent changes in stem allometry and angle influenced the reduction in vertical growth rate to a similar degree.

Constrained handgrip force decreases upper extremity muscle activation and arm strength.

PubMed

Smets, Martin P H; Potvin, James R; Keir, Peter J

2009-09-01

Many industrial tasks require repetitive shoulder exertions to be performed with concurrent physical and mental demands. The highly mobile nature of the shoulder predisposes it to injury. The purpose of this study was to determine the effects of simultaneous gripping, at a specified magnitude, on muscle activity and maximal arm force in various directions. Ten female subjects performed maximal arm exertions at two different heights and five directions using both specified (30% maximum voluntary grip) and preferred (self-selected) grip forces. Electromyography was recorded from eight muscles of the right upper extremity. The preferred grip condition produced grip forces that were dependent on the combination of arm height and force direction and were significantly greater (arm force down), lower (to left, up and push forward), or similar to the specified grip condition. Regardless of the magnitude of the preferred grip force, specifying the grip resulted in decreased maximal arm strength (by 18-25%) and muscle activity (by 15-30%) in all conditions, indicating an interfering effect when the grip force was specified by visual target force-matching. Task constraints, such as specific gripping demands, may decrease peak force levels attainable and alter muscle activity. Depending on the nature of task, the amount of relative demand may differ, which should be considered when determining safety thresholds.

The influence of seat height, trunk inclination and hip posture on the activity of the superior trapezius and longissimus

PubMed Central

Bertolaccini, Guilherme da Silva; Nakajima, Rafael Kendi; Filho, Idinei Francisco Pires de Carvalho; Paschoarelli, Luis Carlos; Medola, Fausto Orsi

2016-01-01

[Purpose] This study was aimed at investigating the influence of seat height and body posture on the activity of the superior trapezius and longissimus muscles. [Subjects and Methods] Twenty two healthy subjects were instructed to perform a total of eight different body postures, varying according three main factors: seat height (low and high seat); trunk inclination (upright and leaning forward at 45°); and the hips in abduction and adduction. Electromyography of the superior trapezius and longissimus was collected bilaterally, and the average values were obtained and compared across all the postures. [Results] The activity of the superior trapezius and longissimus significantly changes according to the seat height and trunk inclination. For both seat heights, sitting with trunk leaning forward resulted in a significant increase in the activity of both muscles. When sitting in a high seat and the trunk leaning forward, the superior trapezius activity was significantly reduced when compared to the same posture in a low seat. [Conclusion] This study contributes to the knowledge on the influence of the body posture and seat configuration on the activity of postural muscles. Reducing the biomechanical loads on the postural muscles must be targeted in order to improve users’ comfort and safety. PMID:27313381

Cognitive framing in action.

PubMed

Huhn, John M; Potts, Cory Adam; Rosenbaum, David A

2016-06-01

Cognitive framing effects have been widely reported in higher-level decision-making and have been ascribed to rules of thumb for quick thinking. No such demonstrations have been reported for physical action, as far as we know, but they would be expected if cognition for physical action is fundamentally similar to cognition for higher-level decision-making. To test for such effects, we asked participants to reach for a horizontally-oriented pipe to move it from one height to another while turning the pipe 180° to bring one end (the "business end") to a target on the left or right. From a physical perspective, participants could have always rotated the pipe in the same angular direction no matter which end was the business end; a given participant could have always turned the pipe clockwise or counter-clockwise. Instead, our participants turned the business end counter-clockwise for left targets and clockwise for right targets. Thus, the way the identical physical task was framed altered the way it was performed. This finding is consistent with the hypothesis that cognition for physical action is fundamentally similar to cognition for higher-level decision-making. A tantalizing possibility is that higher-level decision heuristics have roots in the control of physical action, a hypothesis that accords with embodied views of cognition. Copyright © 2016 Elsevier B.V. All rights reserved.

Growth hormone (GH) dosing during catch-up growth guided by individual responsiveness decreases growth response variability in prepubertal children with GH deficiency or idiopathic short stature.

PubMed

Kriström, Berit; Aronson, A Stefan; Dahlgren, Jovanna; Gustafsson, Jan; Halldin, Maria; Ivarsson, Sten A; Nilsson, Nils-Osten; Svensson, Johan; Tuvemo, Torsten; Albertsson-Wikland, Kerstin

2009-02-01

Weight-based GH dosing results in a wide variation in growth response in children with GH deficiency (GHD) or idiopathic short stature (ISS). The hypothesis tested was whether individualized GH doses, based on variation in GH responsiveness estimated by a prediction model, reduced variability in growth response around a set height target compared with a standardized weight-based dose. A total of 153 short prepubertal children diagnosed with isolated GHD or ISS (n = 43) and at least 1 SD score (SDS) below midparental height SDS (MPH(SDS)) were included in this 2-yr multicenter study. The children were randomized to either a standard (43 microg/kg.d) or individualized (17-100 microg/kg.d) GH dose. We measured the deviation of height(SDS) from individual MPH(SDS) (diffMPH(SDS)). The primary endpoint was the difference in the range of diffMPH(SDS) between the two groups. The diffMPH(SDS) range was reduced by 32% in the individualized-dose group relative to the standard-dose group (P < 0.003), whereas the mean diffMPH(SDS) was equal: -0.42 +/- 0.46 and -0.48 +/- 0.67, respectively. Gain in height(SDS) 0-2 yr was equal for the GH-deficient and ISS groups: 1.31 +/- 0.47 and 1.36 +/- 0.47, respectively, when ISS was classified on the basis of maximum GH peak on the arginine-insulin tolerance test or 24-h profile. Individualized GH doses during catch-up growth significantly reduce the proportion of unexpectedly good and poor responders around a predefined individual growth target and result in equal growth responses in children with GHD and ISS.

[GHBP, IGF-1 and IGFBP-3 serum levels in familial short-statured and normal-statured children].

PubMed

del Valle Núñez, Cristóbal Jorge; López-Siguero, Juan Pedro; López-Canti, Luis Fernando; Lechuga Campoy, José Luis; Espigares Martín, Rosa; Martínez-Aedo Ollero, María José

2004-10-09

Growth hormone binding protein (GHBP), insuline-like growth factor 1 (IGF-1) and insuline-like growth factor binding protein 3 (IGFBP-3) serum concentrations were studied in familial short-statured patients (FSS) and age-matched normal-statured subjects. The aim of the study was to ascertain whether differences in growth factors concentrations between groups could be shown and whether they may contribute to explaining the different patterns of growth in both groups. Serum samples of 38 FSS patients (20 boys) and 31 normal-statured subjects (15 boys) in Tanner I stage (prepubertal), were analysed in a central laboratory. All auxological parameters (height, growth velocity, target height, body mass index (BMI) and biochemical parameters (IGF-1 and IGFBP-3) were standardised for age and sex-matched subjects. GHBP values were expressed as percentage of specific binding. The studied populations were similar and no statistically-significant differences in chronological age, bone age and BMI were found. Height, growth velocity and target height were significantly lower in FSS patients compared with normal subjects (p < 0.0001). IGF-1, IGFBP-3 and GHBP concentrations were significantly lower in the FSS group (p < 0.01). Correlations were found between IGF-1 and IGFBP-3 (r = 0.56; p = 0.0004) and between IGF-1 and GHBP (r = 0.34; p = 0.03) in the FSS group. However, in the normal-statured group only BMI and GHBP were correlated (r = 0.5; p = 0.02). These results strongly support the importance of the GH/IGF-1 functional axis in the pattern of growth and probably contribute to understanding of the pathophysiologic basis of the auxological differences found between groups.

The Oportunidades program increases the linear growth of children enrolled at young ages in urban Mexico.

PubMed

Leroy, Jef L; García-Guerra, Armando; García, Raquel; Dominguez, Clara; Rivera, Juan; Neufeld, Lynnette M

2008-04-01

The goal of this study was to evaluate the impact of Mexico's conditional cash transfer program, Oportunidades, on the growth of children <24 mo of age living in urban areas. Beneficiary families received cash transfers, a fortified food (targeted to pregnant and lactating women, children 6-23 mo, and children with low weight 2-4 y), and curative health services, among other benefits. Program benefits were conditional on preventative health care utilization and attendance of health and nutrition education sessions. We estimated the impact of the program after 2 y of operation in a panel of 432 children <24 mo of age at baseline (2002). We used difference-in-difference propensity score matching, which takes into account nonrandom program participation and the effects of unobserved fixed characteristics on outcomes. All models controlled for child age, sex, baseline anthropometry, and maternal height. Anthropometric Z-scores were calculated using the new WHO growth reference standards. There was no overall association between program participation and growth in children 6 to 24 mo of age. Children in intervention families younger than 6 mo of age at baseline grew 1.5 cm (P < 0.05) more than children in comparison families, corresponding to 0.41 height-for-age Z-scores (HAZ) (P < 0.05). They also gained an additional 0.76 kg (P < 0.01) or 0.47 weight-for-height Z-scores (P < 0.05). Children living in the poorest intervention households tended (0.05 < P < 0.10) to be taller than comparison children (0.9 cm, 0.27 HAZ). Oportunidades, with its strong nutrition component, is an effective tool to improve the growth of infants in poor urban households.

Height growth in western white pine progenies

Treesearch

G. E. Rehfeldt; R. J. Steinhoff

1970-01-01

Heights of 31 progenies of western white pines from four geographic localities and four crosses between localities were assessed on 14-year-old trees at two sites. Differences in height among individual progenies were detected but could not be related to localities or crosses between localities. Although differential effects of sites on tree height became apparent...

Spinal Elongation and its Effects on Seated Height in a Microgravity Environment

NASA Technical Reports Server (NTRS)

Rajulu, Sudhakar; Young, Karen

2009-01-01

Objectives: 1. To collect spinal elongation induced seated height data for subjects exposed to microgravity environments. 2. To provide information relating to the seated height rate of change over time for astronauts subjected to microgravity. We will collect: Seated Height measurement (ground & flight) and digital still photograph (ground and flight).

Effects of LiDAR point density, sampling size and height threshold on estimation accuracy of crop biophysical parameters.

PubMed

Luo, Shezhou; Chen, Jing M; Wang, Cheng; Xi, Xiaohuan; Zeng, Hongcheng; Peng, Dailiang; Li, Dong

2016-05-30

Vegetation leaf area index (LAI), height, and aboveground biomass are key biophysical parameters. Corn is an important and globally distributed crop, and reliable estimations of these parameters are essential for corn yield forecasting, health monitoring and ecosystem modeling. Light Detection and Ranging (LiDAR) is considered an effective technology for estimating vegetation biophysical parameters. However, the estimation accuracies of these parameters are affected by multiple factors. In this study, we first estimated corn LAI, height and biomass (R² = 0.80, 0.874 and 0.838, respectively) using the original LiDAR data (7.32 points/m²), and the results showed that LiDAR data could accurately estimate these biophysical parameters. Second, comprehensive research was conducted on the effects of LiDAR point density, sampling size and height threshold on the estimation accuracy of LAI, height and biomass. Our findings indicated that LiDAR point density had an important effect on the estimation accuracy for vegetation biophysical parameters, however, high point density did not always produce highly accurate estimates, and reduced point density could deliver reasonable estimation results. Furthermore, the results showed that sampling size and height threshold were additional key factors that affect the estimation accuracy of biophysical parameters. Therefore, the optimal sampling size and the height threshold should be determined to improve the estimation accuracy of biophysical parameters. Our results also implied that a higher LiDAR point density, larger sampling size and height threshold were required to obtain accurate corn LAI estimation when compared with height and biomass estimations. In general, our results provide valuable guidance for LiDAR data acquisition and estimation of vegetation biophysical parameters using LiDAR data.

Ballistic stretching increases flexibility and acute vertical jump height when combined with basketball activity.

PubMed

Woolstenhulme, Mandy T; Griffiths, Christine M; Woolstenhulme, Emily M; Parcell, Allen C

2006-11-01

Stretching is often included as part of a warm-up procedure for basketball activity. However, the efficacy of stretching with respect to sport performance has come into question. We determined the effects of 4 different warm-up protocols followed by 20 minutes of basketball activity on flexibility and vertical jump height. Subjects participated in 6 weeks (2 times per week) of warm-up and basketball activity. The warm-up groups participated in ballistic stretching, static stretching, sprinting, or basketball shooting (control group). We asked 3 questions. First, what effect does 6 weeks of warm-up exercise and basketball play have on both flexibility and vertical jump height? We measured sit and reach and vertical jump height before (week -1) and after (week 7) the 6 weeks. Flexibility increased for the ballistic, static, and sprint groups compared to the control group (p < 0.0001), while vertical jump height did not change for any of the groups. Our second question was what is the acute effect of each warm-up on vertical jump height? We measured vertical jump immediately after the warm-up on 4 separate occasions during the 6 weeks (at weeks 0, 2, 4, and 6). Vertical jump height was not different for any group. Finally, our third question was what is the acute effect of each warm-up on vertical jump height following 20 minutes of basketball play? We measured vertical jump height immediately following 20 minutes of basketball play at weeks 0, 2, 4, and 6. Only the ballistic stretching group demonstrated an acute increase in vertical jump 20 minutes after basketball play (p < 0.05). Coaches should consider using ballistic stretching as a warm-up for basketball play, as it is beneficial to vertical jump performance.

Development and deployment of a high-density linkage map identified quantitative trait loci for plant height in peanut (Arachis hypogaea L.).

PubMed

Huang, Li; Ren, Xiaoping; Wu, Bei; Li, Xinping; Chen, Weigang; Zhou, Xiaojing; Chen, Yuning; Pandey, Manish K; Jiao, Yongqing; Luo, Huaiyong; Lei, Yong; Varshney, Rajeev K; Liao, Boshou; Jiang, Huifang

2016-12-20

Plant height is one of the most important architecture traits in crop plants. In peanut, the genetic basis of plant height remains ambiguous. In this context, we genotyped a recombinant inbred line (RIL) population with 140 individuals developed from a cross between two peanut varieties varying in plant height, Zhonghua 10 and ICG 12625. Genotyping data was generated for 1,175 SSR and 42 transposon polymorphic markers and a high-density genetic linkage map was constructed with 1,219 mapped loci covering total map length of 2,038.75 cM i.e., accounted for nearly 80% of the peanut genome. Quantitative trait locus (QTL) analysis using genotyping and phenotyping data for three environments identified 8 negative-effect QTLs and 10 positive-effect QTLs for plant height. Among these QTLs, 8 QTLs had a large contribution to plant height that explained ≥10% phenotypic variation. Two major-effect consensus QTLs namely cqPHA4a and cqPHA4b were identified with stable performance across three environments. Further, the allelic recombination of detected QTLs proved the existence of the phenomenon of transgressive segregation for plant height in the RIL population. Therefore, this study not only successfully reported a high-density genetic linkage map of peanut and identified genomic region controlling plant height but also opens opportunities for further gene discovery and molecular breeding for plant height in peanut.

Utilization of O4 slant column density to derive aerosol layer height from a spaceborne UV-visible hyperspectral sensor: sensitivity and case study

NASA Astrophysics Data System (ADS)

Park, S. S.; Kim, J.; Lee, H.; Torres, O.; Lee, K.-M.; Lee, S. D.

2015-03-01

The sensitivities of oxygen-dimer (O4) slant column densities (SCDs) to changes in aerosol layer height are investigated using simulated radiances by a radiative transfer model, Linearized Discrete Ordinate Radiative Transfer (LIDORT), and Differential Optical Absorption Spectroscopy (DOAS) technique. The sensitivities of the O4 SCDs to aerosol types and optical properties are also evaluated and compared. Among the O4 absorption bands at 340, 360, 380, and 477 nm, the O4 absorption band at 477 nm is found to be the most suitable to retrieve the aerosol effective height. However, the O4 SCD at 477 nm is significantly influenced not only by the aerosol layer effective height but also by aerosol vertical profiles, optical properties including single scattering albedo (SSA), aerosol optical depth (AOD), and surface albedo. Overall, the error of the retrieved aerosol effective height is estimated to be 414 m (16.5%), 564 m (22.4%), and 1343 m (52.5%) for absorbing, dust, and non-absorbing aerosol, respectively, assuming knowledge on the aerosol vertical distribution type. Using radiance data from the Ozone Monitoring Instrument (OMI), a new algorithm is developed to derive the aerosol effective height over East Asia after the determination of the aerosol type and AOD from the MODerate resolution Imaging Spectroradiometer (MODIS). The retrieved aerosol effective heights are lower by approximately 300 m (27 %) compared to those obtained from the ground-based LIDAR measurements.

Genome-wide Analysis of Body Proportion Classifies Height-Associated Variants by Mechanism of Action and Implicates Genes Important for Skeletal Development.

PubMed

Chan, Yingleong; Salem, Rany M; Hsu, Yu-Han H; McMahon, George; Pers, Tune H; Vedantam, Sailaja; Esko, Tonu; Guo, Michael H; Lim, Elaine T; Franke, Lude; Smith, George Davey; Strachan, David P; Hirschhorn, Joel N

2015-05-07

Human height is a composite measurement, reflecting the sum of leg, spine, and head lengths. Many common variants influence total height, but the effects of these or other variants on the components of height (body proportion) remain largely unknown. We studied sitting height ratio (SHR), the ratio of sitting height to total height, to identify such effects in 3,545 African Americans and 21,590 individuals of European ancestry. We found that SHR is heritable: 26% and 39% of the total variance of SHR can be explained by common variants in European and African Americans, respectively, and global European admixture is negatively correlated with SHR in African Americans (r(2) ≈ 0.03). Six regions reached genome-wide significance (p < 5 × 10(-8)) for association with SHR and overlapped biological candidate genes, including TBX2 and IGFBP3. We found that 130 of 670 height-associated variants are nominally associated (p < 0.05) with SHR, more than expected by chance (p = 5 × 10(-40)). At these 130 loci, the height-increasing alleles are associated with either a decrease (71 loci) or increase (59 loci) in SHR, suggesting that different height loci disproportionally affect either leg length or spine/head length. Pathway analyses via DEPICT revealed that height loci affecting SHR, and especially those affecting leg length, show enrichment of different biological pathways (e.g., bone/cartilage/growth plate pathways) than do loci with no effect on SHR (e.g., embryonic development). These results highlight the value of using a pair of related but orthogonal phenotypes, in this case SHR with height, as a prism to dissect the biology underlying genetic associations in polygenic traits and diseases. Copyright © 2015 The American Society of Human Genetics. Published by Elsevier Inc. All rights reserved.

Effects of Tip Clearance and Casing Recess on Heat Transfer and Stage Efficiency in Axial Turbines

NASA Technical Reports Server (NTRS)

Ameri, A. A.; Steinthorsson, E.; Rigby, David L.

1998-01-01

Calculations were performed to assess the effect of the tip leakage flow on the rate of heat transfer to blade, blade tip and casing. The effect on exit angle and efficiency was also examined. Passage geometries with and without casing recess were considered. The geometry and the flow conditions of the GE-E 3 first stage turbine, which represents a modem gas turbine blade were used for the analysis. Clearance heights of 0%, 1%, 1.5% and 3% of the passage height were considered. For the two largest clearance heights considered, different recess depths were studied. There was an increase in the thermal load on all the heat transfer surfaces considered due to enlargement of the clearance gap. Introduction of recessed casing resulted in a drop in the rate of heat transfer on the pressure side but the picture on the suction side was found to be more complex for the smaller tip clearance height considered. For the larger tip clearance height the effect of casing recess was an orderly reduction in the suction side heat transfer as the casing recess height was increased. There was a marked reduction of heat load and peak values on the blade tip upon introduction of casing recess, however only a small reduction was observed on the casing itself. It was reconfirmed that there is a linear relationship between the efficiency and the tip gap height. It was also observed that the recess casing has a small effect on the efficiency but can have a moderating effect on the flow underturning at smaller tip clearances.

Effects of cane length and diameter and judgment type on the constant error ratio for estimated height in blindfolded, visually impaired, and sighted participants.

PubMed

Huang, Kuo-Chen; Leung, Cherng-Yee; Wang, Hsiu-Feng

2010-04-01

The purpose of this study was to assess the ability of blindfolded, visually impaired, and sighted individuals to estimate object height as a function of cane length, cane diameter, and judgment type. 48 undergraduate students (ages 20 to 23 years) were recruited to participate in the study. Participants were divided into low-vision, severely myopic, and normal-vision groups. Five stimulus heights were explored with three cane lengths, varying cane diameters, and judgment types. The participants were asked to estimate the stimulus height with or without reference to a standard block. Results showed that the constant error ratio for estimated height improved with decreasing cane length and comparative judgment. The findings were unclear regarding the effect of cane length on haptic perception of height. Implications were discussed for designing environments, such as stair heights, chairs, the magnitude of apertures, etc., for visually impaired individuals.

Body height and occupational success for actors and actresses.

PubMed

Stieger, Stefan; Burger, Christoph

2010-08-01

The association of body height with occupational success has been frequently studied, with previous research mainly finding a positive effect among men and positive or null effects among women. Occupational success has almost exclusively been measured so far by short-term success variables (e.g., annual income). In the present study, the relationship of success and height was examined in a group of actors and actresses using a large online database about movies (Internet Movie Database) where heights of actors and actresses are stated. The number of roles played in movies and television series during each actor's lifetime was used as a measure of long-term occupational success. No height effect was found for male actors but a significant negative effect was found for actresses, even after controlling for possible confounding influences (age and birth year). Compared to the general population, actors and actresses were significantly taller; however, actresses who were shorter than average were more likely to achieve greater occupational success, in terms of being featured in more movies.

The Effect of Molar Axial Wall Height on CAD/CAM Ceramic Crowns With Moderate Occlusal Convergence

DTIC Science & Technology

2006-05-01

CEREC e.max* CAD crowns on preparations with moderate total occlusal convergence (16 degrees). Methods: 60 recently-extracted maxillary third molars ...The Effect of Molar Axial Wall Height on CAD/CAM Ceramic Crowns With Moderate Occlusal Convergence Wyeth L. Hoopes The Effect of Molar Axial Wall... Molar Axial Wall Height on CAD/CAM Ceramic Crowns With Moderate Occlusal Convergence is appropria tely acknowledged and beyond brief excerpts, is with

Effective pollutant emission heights for atmospheric transport modelling based on real-world information.

PubMed

Pregger, Thomas; Friedrich, Rainer

2009-02-01

Emission data needed as input for the operation of atmospheric models should not only be spatially and temporally resolved. Another important feature is the effective emission height which significantly influences modelled concentration values. Unfortunately this information, which is especially relevant for large point sources, is usually not available and simple assumptions are often used in atmospheric models. As a contribution to improve knowledge on emission heights this paper provides typical default values for the driving parameters stack height and flue gas temperature, velocity and flow rate for different industrial sources. The results were derived from an analysis of the probably most comprehensive database of real-world stack information existing in Europe based on German industrial data. A bottom-up calculation of effective emission heights applying equations used for Gaussian dispersion models shows significant differences depending on source and air pollutant and compared to approaches currently used for atmospheric transport modelling.

Reduced Height (Rht) Alleles Affect Wheat Grain Quality

PubMed Central

Casebow, Richard; Hadley, Caroline; Uppal, Rajneet; Addisu, Molla; Loddo, Stefano; Kowalski, Ania; Griffiths, Simon; Gooding, Mike

2016-01-01

The effects of dwarfing alleles (reduced height, Rht) in near isogenic lines on wheat grain quality are characterised in field experiments and related to effects on crop height, grain yield and GA-sensitivity. Alleles included those that conferred GA-insensitivity (Rht-B1b, Rht-B1c, Rht-D1b, Rht-D1c) as well as those that retained GA-sensitivity (rht(tall), Rht8, Rht8 + Ppd-D1a, Rht12). Full characterisation was facilitated by including factors with which the effects of Rht alleles are known to interact for grain yield (i.e. system, [conventional or organic]; tillage intensity [plough-based, minimum or zero]; nitrogen fertilizer level [0–450 kg N/ha]; and genetic backgrounds varying in height [cvs Maris Huntsman, Maris Widgeon, and Mercia]. Allele effects on mean grain weight and grain specific weight were positively associated with final crop height: dwarfing reduced these quality criteria irrespective of crop management or GA-sensitivity. In all but two experiments the effects of dwarfing alleles on grain nitrogen and sulphur concentrations were closely and negatively related to effects on grain yield, e.g. a quadratic relationship between grain yield and crop height manipulated by the GA-insensitive alleles was mirrored by quadratic relationships for nitrogen and sulphur concentrations: the highest yields and most dilute concentrations occurred around 80cm. In one of the two exceptional experiments the GA-insensitive Rht-B1b and Rht-B1c significantly (P<0.05) reduced grain nitrogen concentration in the absence of an effect on yield, and in the remaining experiment the GA-sensitive Rht8 significantly reduced both grain yield and grain nitrogen concentration simultaneously. When Rht alleles diluted grain nitrogen concentration, N:S ratios and SDS-sedimentation volumes were often improved. Hagberg falling number (HFN) was negatively related to crop height but benefits from dwarfing were only seen for GA-insensitive alleles. For HFN, therefore, there was the strongest evidence for a direct pleiotropic effect of GA-insensitivity, rather than an effect consequential to yield and/or height. PMID:27196288

Reduced Height (Rht) Alleles Affect Wheat Grain Quality.

PubMed

Casebow, Richard; Hadley, Caroline; Uppal, Rajneet; Addisu, Molla; Loddo, Stefano; Kowalski, Ania; Griffiths, Simon; Gooding, Mike

2016-01-01

The effects of dwarfing alleles (reduced height, Rht) in near isogenic lines on wheat grain quality are characterised in field experiments and related to effects on crop height, grain yield and GA-sensitivity. Alleles included those that conferred GA-insensitivity (Rht-B1b, Rht-B1c, Rht-D1b, Rht-D1c) as well as those that retained GA-sensitivity (rht(tall), Rht8, Rht8 + Ppd-D1a, Rht12). Full characterisation was facilitated by including factors with which the effects of Rht alleles are known to interact for grain yield (i.e. system, [conventional or organic]; tillage intensity [plough-based, minimum or zero]; nitrogen fertilizer level [0-450 kg N/ha]; and genetic backgrounds varying in height [cvs Maris Huntsman, Maris Widgeon, and Mercia]. Allele effects on mean grain weight and grain specific weight were positively associated with final crop height: dwarfing reduced these quality criteria irrespective of crop management or GA-sensitivity. In all but two experiments the effects of dwarfing alleles on grain nitrogen and sulphur concentrations were closely and negatively related to effects on grain yield, e.g. a quadratic relationship between grain yield and crop height manipulated by the GA-insensitive alleles was mirrored by quadratic relationships for nitrogen and sulphur concentrations: the highest yields and most dilute concentrations occurred around 80cm. In one of the two exceptional experiments the GA-insensitive Rht-B1b and Rht-B1c significantly (P<0.05) reduced grain nitrogen concentration in the absence of an effect on yield, and in the remaining experiment the GA-sensitive Rht8 significantly reduced both grain yield and grain nitrogen concentration simultaneously. When Rht alleles diluted grain nitrogen concentration, N:S ratios and SDS-sedimentation volumes were often improved. Hagberg falling number (HFN) was negatively related to crop height but benefits from dwarfing were only seen for GA-insensitive alleles. For HFN, therefore, there was the strongest evidence for a direct pleiotropic effect of GA-insensitivity, rather than an effect consequential to yield and/or height.

Extent of height variability explained by known height-associated genetic variants in an isolated population of the Adriatic coast of Croatia.

PubMed

Zhang, Ge; Karns, Rebekah; Sun, Guangyun; Indugula, Subba Rao; Cheng, Hong; Havas-Augustin, Dubravka; Novokmet, Natalija; Rudan, Dusko; Durakovic, Zijad; Missoni, Sasa; Chakraborty, Ranajit; Rudan, Pavao; Deka, Ranjan

2011-01-01

Human height is a classical example of a polygenic quantitative trait. Recent large-scale genome-wide association studies (GWAS) have identified more than 200 height-associated loci, though these variants explain only 2∼10% of overall variability of normal height. The objective of this study was to investigate the variance explained by these loci in a relatively isolated population of European descent with limited admixture and homogeneous genetic background from the Adriatic coast of Croatia. In a sample of 1304 individuals from the island population of Hvar, Croatia, we performed genome-wide SNP typing and assessed the variance explained by genetic scores constructed from different panels of height-associated SNPs extracted from five published studies. The combined information of the 180 SNPs reported by Lango Allen el al. explained 7.94% of phenotypic variation in our sample. Genetic scores based on 20~50 SNPs reported by the remaining individual GWA studies explained 3~5% of height variance. These percentages of variance explained were within ranges comparable to the original studies and heterogeneity tests did not detect significant differences in effect size estimates between our study and the original reports, if the estimates were obtained from populations of European descent. We have evaluated the portability of height-associated loci and the overall fitting of estimated effect sizes reported in large cohorts to an isolated population. We found proportions of explained height variability were comparable to multiple reference GWAS in cohorts of European descent. These results indicate similar genetic architecture and comparable effect sizes of height loci among populations of European descent. © 2011 Zhang et al.

A Global Sensitivity Analysis Method on Maximum Tsunami Wave Heights to Potential Seismic Source Parameters

NASA Astrophysics Data System (ADS)

Ren, Luchuan

2015-04-01

A Global Sensitivity Analysis Method on Maximum Tsunami Wave Heights to Potential Seismic Source Parameters Luchuan Ren, Jianwei Tian, Mingli Hong Institute of Disaster Prevention, Sanhe, Heibei Province, 065201, P.R. China It is obvious that the uncertainties of the maximum tsunami wave heights in offshore area are partly from uncertainties of the potential seismic tsunami source parameters. A global sensitivity analysis method on the maximum tsunami wave heights to the potential seismic source parameters is put forward in this paper. The tsunami wave heights are calculated by COMCOT ( the Cornell Multi-grid Coupled Tsunami Model), on the assumption that an earthquake with magnitude MW8.0 occurred at the northern fault segment along the Manila Trench and triggered a tsunami in the South China Sea. We select the simulated results of maximum tsunami wave heights at specific sites in offshore area to verify the validity of the method proposed in this paper. For ranking importance order of the uncertainties of potential seismic source parameters (the earthquake's magnitude, the focal depth, the strike angle, dip angle and slip angle etc..) in generating uncertainties of the maximum tsunami wave heights, we chose Morris method to analyze the sensitivity of the maximum tsunami wave heights to the aforementioned parameters, and give several qualitative descriptions of nonlinear or linear effects of them on the maximum tsunami wave heights. We quantitatively analyze the sensitivity of the maximum tsunami wave heights to these parameters and the interaction effects among these parameters on the maximum tsunami wave heights by means of the extended FAST method afterward. The results shows that the maximum tsunami wave heights are very sensitive to the earthquake magnitude, followed successively by the epicenter location, the strike angle and dip angle, the interactions effect between the sensitive parameters are very obvious at specific site in offshore area, and there exist differences in importance order in generating uncertainties of the maximum tsunami wave heights for same group parameters at different specific sites in offshore area. These results are helpful to deeply understand the relationship between the tsunami wave heights and the seismic tsunami source parameters. Keywords: Global sensitivity analysis; Tsunami wave height; Potential seismic tsunami source parameter; Morris method; Extended FAST method

Final height in survivors of childhood cancer compared with Height Standard Deviation Scores at diagnosis.

PubMed

Knijnenburg, S L; Raemaekers, S; van den Berg, H; van Dijk, I W E M; Lieverst, J A; van der Pal, H J; Jaspers, M W M; Caron, H N; Kremer, L C; van Santen, H M

2013-04-01

Our study aimed to evaluate final height in a cohort of Dutch childhood cancer survivors (CCS) and assess possible determinants of final height, including height at diagnosis. We calculated standard deviation scores (SDS) for height at initial cancer diagnosis and height in adulthood in a cohort of 573 CCS. Multivariable regression analyses were carried out to estimate the influence of different determinants on height SDS at follow-up. Overall, survivors had a normal height SDS at cancer diagnosis. However, at follow-up in adulthood, 8.9% had a height ≤-2 SDS. Height SDS at diagnosis was an important determinant for adult height SDS. Children treated with (higher doses of) radiotherapy showed significantly reduced final height SDS. Survivors treated with total body irradiation (TBI) and craniospinal radiation had the greatest loss in height (-1.56 and -1.37 SDS, respectively). Younger age at diagnosis contributed negatively to final height. Height at diagnosis was an important determinant for height SDS at follow-up. Survivors treated with TBI, cranial and craniospinal irradiation should be monitored periodically for adequate linear growth, to enable treatment on time if necessary. For correct interpretation of treatment-related late effects studies in CCS, pre-treatment data should always be included.

The genetic architecture of maize height.

PubMed

Peiffer, Jason A; Romay, Maria C; Gore, Michael A; Flint-Garcia, Sherry A; Zhang, Zhiwu; Millard, Mark J; Gardner, Candice A C; McMullen, Michael D; Holland, James B; Bradbury, Peter J; Buckler, Edward S

2014-04-01

Height is one of the most heritable and easily measured traits in maize (Zea mays L.). Given a pedigree or estimates of the genomic identity-by-state among related plants, height is also accurately predictable. But, mapping alleles explaining natural variation in maize height remains a formidable challenge. To address this challenge, we measured the plant height, ear height, flowering time, and node counts of plants grown in >64,500 plots across 13 environments. These plots contained >7300 inbreds representing most publically available maize inbreds in the United States and families of the maize Nested Association Mapping (NAM) panel. Joint-linkage mapping of quantitative trait loci (QTL), fine mapping in near isogenic lines (NILs), genome-wide association studies (GWAS), and genomic best linear unbiased prediction (GBLUP) were performed. The heritability of maize height was estimated to be >90%. Mapping NAM family-nested QTL revealed the largest explained 2.1 ± 0.9% of height variation. The effects of two tropical alleles at this QTL were independently validated by fine mapping in NIL families. Several significant associations found by GWAS colocalized with established height loci, including brassinosteroid-deficient dwarf1, dwarf plant1, and semi-dwarf2. GBLUP explained >80% of height variation in the panels and outperformed bootstrap aggregation of family-nested QTL models in evaluations of prediction accuracy. These results revealed maize height was under strong genetic control and had a highly polygenic genetic architecture. They also showed that multiple models of genetic architecture differing in polygenicity and effect sizes can plausibly explain a population's variation in maize height, but they may vary in predictive efficacy.

Effect of prescribed prism on monocular interpupillary distances and fitting heights for progressive add lenses.

PubMed

Brooks, C W; Riley, H D

1994-06-01

Success in fitting progressive addition lenses is dependent upon the accurate placement of the progressive zone. Both eyes must track simultaneously within the boundary of the progressive corridor. Vertical prism will displace the wearer's lines of sight and consequently eye position. Because fitting heights are measured using an empty frame, subjects with vertical phorias usually will fuse, and not show the vertical differences in pupil heights during the measuring process. Therefore, when prescriptions contain vertical prism one must consider the changes in measured fitting heights that will occur once the lenses are placed in the frame. Fitting heights must be altered approximately 0.3 mm for each vertical prism diopter prescribed. The fitting height adjustment is opposite from the base direction of the prescribed prism. An explanation of the effect of prescribed horizontal prism on monocular interpupillary distance (PD) measurements is also included.

Time dependent genetic analysis links field and controlled environment phenotypes in the model C 4 grass Setaria

DOE PAGES

Feldman, Max J.; Paul, Rachel E.; Banan, Darshi; ...

2017-06-23

Vertical growth of plants is a dynamic process that is influenced by genetic and environmental factors and has a pronounced effect on overall plant architecture and biomass composition. For this research, we have performed six controlled growth trials of an interspecific Setaria italica x Setaria viridis recombinant inbred line population to assess how the genetic architecture of plant height is influenced by developmental queues, water availability and planting density. The non-destructive nature of plant height measurements has enabled us to monitor height throughout the plant life cycle in both field and controlled environments. We find that plant height is reducedmore » under water limitation and high density planting and affected by growth environment (field vs. growth chamber). The results support a model where plant height is a heritable, polygenic trait and that the major genetic loci that influence plant height function independent of growth environment. The identity and contribution of loci that influence height changes dynamically throughout development and the reduction of growth observed in water limited environments is a consequence of delayed progression through the genetic program which establishes plant height in Setaria. In this population, alleles inherited from the weedy S. viridis parent act to increase plant height early, whereas a larger number of small effect alleles inherited from the domesticated S. italica parent collectively act to increase plant height later in development.« less

Time dependent genetic analysis links field and controlled environment phenotypes in the model C 4 grass Setaria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feldman, Max J.; Paul, Rachel E.; Banan, Darshi

Vertical growth of plants is a dynamic process that is influenced by genetic and environmental factors and has a pronounced effect on overall plant architecture and biomass composition. For this research, we have performed six controlled growth trials of an interspecific Setaria italica x Setaria viridis recombinant inbred line population to assess how the genetic architecture of plant height is influenced by developmental queues, water availability and planting density. The non-destructive nature of plant height measurements has enabled us to monitor height throughout the plant life cycle in both field and controlled environments. We find that plant height is reducedmore » under water limitation and high density planting and affected by growth environment (field vs. growth chamber). The results support a model where plant height is a heritable, polygenic trait and that the major genetic loci that influence plant height function independent of growth environment. The identity and contribution of loci that influence height changes dynamically throughout development and the reduction of growth observed in water limited environments is a consequence of delayed progression through the genetic program which establishes plant height in Setaria. In this population, alleles inherited from the weedy S. viridis parent act to increase plant height early, whereas a larger number of small effect alleles inherited from the domesticated S. italica parent collectively act to increase plant height later in development.« less

Time dependent genetic analysis links field and controlled environment phenotypes in the model C4 grass Setaria

PubMed Central

Paul, Rachel E.; Sebastian, Jose; Yee, Muh-Ching; Jiang, Hui; Lipka, Alexander E.; Brutnell, Thomas P.; Dinneny, José R.; Leakey, Andrew D. B.

2017-01-01

Vertical growth of plants is a dynamic process that is influenced by genetic and environmental factors and has a pronounced effect on overall plant architecture and biomass composition. We have performed six controlled growth trials of an interspecific Setaria italica x Setaria viridis recombinant inbred line population to assess how the genetic architecture of plant height is influenced by developmental queues, water availability and planting density. The non-destructive nature of plant height measurements has enabled us to monitor height throughout the plant life cycle in both field and controlled environments. We find that plant height is reduced under water limitation and high density planting and affected by growth environment (field vs. growth chamber). The results support a model where plant height is a heritable, polygenic trait and that the major genetic loci that influence plant height function independent of growth environment. The identity and contribution of loci that influence height changes dynamically throughout development and the reduction of growth observed in water limited environments is a consequence of delayed progression through the genetic program which establishes plant height in Setaria. In this population, alleles inherited from the weedy S. viridis parent act to increase plant height early, whereas a larger number of small effect alleles inherited from the domesticated S. italica parent collectively act to increase plant height later in development. PMID:28644860

Time dependent genetic analysis links field and controlled environment phenotypes in the model C4 grass Setaria.

PubMed

Feldman, Max J; Paul, Rachel E; Banan, Darshi; Barrett, Jennifer F; Sebastian, Jose; Yee, Muh-Ching; Jiang, Hui; Lipka, Alexander E; Brutnell, Thomas P; Dinneny, José R; Leakey, Andrew D B; Baxter, Ivan

2017-06-01

Vertical growth of plants is a dynamic process that is influenced by genetic and environmental factors and has a pronounced effect on overall plant architecture and biomass composition. We have performed six controlled growth trials of an interspecific Setaria italica x Setaria viridis recombinant inbred line population to assess how the genetic architecture of plant height is influenced by developmental queues, water availability and planting density. The non-destructive nature of plant height measurements has enabled us to monitor height throughout the plant life cycle in both field and controlled environments. We find that plant height is reduced under water limitation and high density planting and affected by growth environment (field vs. growth chamber). The results support a model where plant height is a heritable, polygenic trait and that the major genetic loci that influence plant height function independent of growth environment. The identity and contribution of loci that influence height changes dynamically throughout development and the reduction of growth observed in water limited environments is a consequence of delayed progression through the genetic program which establishes plant height in Setaria. In this population, alleles inherited from the weedy S. viridis parent act to increase plant height early, whereas a larger number of small effect alleles inherited from the domesticated S. italica parent collectively act to increase plant height later in development.

Effect of severing method and stump height on coppice growth

Treesearch

John B. Crist; James A. Mattson; Sharon A. Winsauer

1983-01-01

In this study we evaluated the effect of stem severing method and stump height on coppice growth in a short-rotation intensively cultured Populus plantation 1, 2, and 3 years after cutting. Initially, stumps 46 cm high had smaller and significantly more sprouts than either 8 or 15 cm high stumps. However, the dominant sprouts were not affected by the stump height....

Exploring Richtmyer-Meshkov instability phenomena and ejecta cloud physics

NASA Astrophysics Data System (ADS)

Zellner, M. B.; Buttler, W. T.

2008-09-01

This effort investigates ejecta cloud expansion from a shocked Sn target propagating into vacuum. To assess the expansion, dynamic ejecta cloud density distributions were measured via piezoelectric pin diagnostics offset at three heights from the target free surface. The dynamic distributions were first converted into static distributions, similar to a radiograph, and then self compared. The cloud evolved self-similarly at the distances and times measured, inferring that the amount of mass imparted to the instability, detected as ejecta, either ceased or approached an asymptotic limit.

Studying the genetic basis of drought tolerance in sorghum by managed stress trials and adjustments for phenological and plant height differences.

PubMed

Sabadin, P K; Malosetti, M; Boer, M P; Tardin, F D; Santos, F G; Guimarães, C T; Gomide, R L; Andrade, C L T; Albuquerque, P E P; Caniato, F F; Mollinari, M; Margarido, G R A; Oliveira, B F; Schaffert, R E; Garcia, A A F; van Eeuwijk, F A; Magalhaes, J V

2012-05-01

Managed environments in the form of well watered and water stressed trials were performed to study the genetic basis of grain yield and stay green in sorghum with the objective of validating previously detected QTL. As variations in phenology and plant height may influence QTL detection for the target traits, QTL for flowering time and plant height were introduced as cofactors in QTL analyses for yield and stay green. All but one of the flowering time QTL were detected near yield and stay green QTL. Similar co-localization was observed for two plant height QTL. QTL analysis for yield, using flowering time/plant height cofactors, led to yield QTL on chromosomes 2, 3, 6, 8 and 10. For stay green, QTL on chromosomes 3, 4, 8 and 10 were not related to differences in flowering time/plant height. The physical positions for markers in QTL regions projected on the sorghum genome suggest that the previously detected plant height QTL, Sb-HT9-1, and Dw2, in addition to the maturity gene, Ma5, had a major confounding impact on the expression of yield and stay green QTL. Co-localization between an apparently novel stay green QTL and a yield QTL on chromosome 3 suggests there is potential for indirect selection based on stay green to improve drought tolerance in sorghum. Our QTL study was carried out with a moderately sized population and spanned a limited geographic range, but still the results strongly emphasize the necessity of corrections for phenology in QTL mapping for drought tolerance traits in sorghum.

Growth hormone responsiveness: peak stimulated growth hormone levels and other variables in idiopathic short stature (ISS): data from the National Cooperative Growth Study.

PubMed

Moore, Wayne V; Dana, Ken; Frane, James; Lippe, Barbara

2008-09-01

In children with idiopathic short stature (ISS), growth hormone (GH) response to a provocative test will be inversely related to the first year response to hGH and be a variable accounting for a degree of responsiveness. Because high levels of GH are a characteristic of GH insensitivity, such as in Laron syndrome, it is possible that a high stimulated GH is associated with a lower first year height velocity among children diagnosed as having ISS. We examined the relationship between the peak stimulated GH levels in 3 ISS groups; GH >10 -<25, 25-40, and >40 ng/mL and the first year growth response to rhGH therapy. We also looked at 8 other predictor variables (age, sex, height SDS, height age, body mass index (BMI), bone age, dose, and SDS deficit from target parental height. Multiple regression analysis with the first year height as the dependent variable and peak stimulated GH was the primary endpoint. The predictive value of adding each of the other variables was then assessed. Mean change in height velocity was similar among the three groups, with a maximum difference among the groups of 0.6 cm/yr. There was a small but statistically significant correlation (r=-0.12) between the stimulated GH and first year height velocity. The small correlation between first year growth response and peak GH is not clinically relevant in defining GH resistance. No cut off level by peak GH could be determined to enhance the usefulness of this measure to predict response. Baseline age was the only clinically significant predictor, R-squared, 6.4%. All other variables contributed less than an additional 2% to the R-squared.

Source location impact on relative tsunami strength along the U.S. West Coast

NASA Astrophysics Data System (ADS)

Rasmussen, L.; Bromirski, P. D.; Miller, A. J.; Arcas, D.; Flick, R. E.; Hendershott, M. C.

2015-07-01

Tsunami propagation simulations are used to identify which tsunami source locations would produce the highest amplitude waves on approach to key population centers along the U.S. West Coast. The reasons for preferential influence of certain remote excitation sites are explored by examining model time sequences of tsunami wave patterns emanating from the source. Distant bathymetric features in the West and Central Pacific can redirect tsunami energy into narrow paths with anomalously large wave height that have disproportionate impact on small areas of coastline. The source region generating the waves can be as little as 100 km along a subduction zone, resulting in distinct source-target pairs with sharply amplified wave energy at the target. Tsunami spectral ratios examined for transects near the source, after crossing the West Pacific, and on approach to the coast illustrate how prominent bathymetric features alter wave spectral distributions, and relate to both the timing and magnitude of waves approaching shore. To contextualize the potential impact of tsunamis from high-amplitude source-target pairs, the source characteristics of major historical earthquakes and tsunamis in 1960, 1964, and 2011 are used to generate comparable events originating at the highest-amplitude source locations for each coastal target. This creates a type of "worst-case scenario," a replicate of each region's historically largest earthquake positioned at the fault segment that would produce the most incoming tsunami energy at each target port. An amplification factor provides a measure of how the incoming wave height from the worst-case source compares to the historical event.

Gender-related differences in adolescent hypertension and in target organ effects.

PubMed

Juhász, Mária; Katona, Eva; Settakis, Georgios; Paragh, György; Molnár, Csilla; Fülesdi, Béla; Páll, Dénes

2010-04-01

To assess whether a gender difference exists in adolescent hypertension and its target organ damage and to compare potential confounding factors and target organ damage in hypertensive and normotensive adolescent girls. From the Debrecen Hypertension Study, the anthropometric, blood pressure, and laboratory data as well as intima-media thickness (IMT) and left ventricular mass index (LVMI) of 58 hypertensive boys, 56 hypertensive girls, and 30 normotensive girls were analyzed. Both systolic and mean blood pressure values were higher in adolescent hypertensive boys than in girls. This difference was also present when comparing 24-hour average blood pressure values. Plasma concentrations of nitric oxide (NO) and endothelin-1 were not different in the two gender groups. IMT of the carotid arteries were similar in hypertensive boys and girls, but a significantly higher LVMI was detected in boys. A significant difference was detected in anthropometric data (height, weight, and body mass index [BMI]), plasma concentration of NO (lower levels in hypertensives), and IMT in hypertensive and normotensive girls (higher IMT in hypertensive girls). There is a difference between the severity of hypertension between hypertensive adolescent girls and boys. Hypertensive girls differ from normotensive girls not only in blood pressure values but also in risk factors and subclinical target organ effects. Further studies are needed to explain the gender differences in adolescent hypertension. The potential role of sex hormones in hypertensive teenagers also needs to be clarified in future works.

The acute effects of a warm-up including static or dynamic stretching on countermovement jump height, reaction time, and flexibility.

PubMed

Perrier, Erica T; Pavol, Michael J; Hoffman, Mark A

2011-07-01

The purpose of this research was to compare the effects of a warm-up with static vs. dynamic stretching on countermovement jump (CMJ) height, reaction time, and low-back and hamstring flexibility and to determine whether any observed performance deficits would persist throughout a series of CMJs. Twenty-one recreationally active men (24.4 ± 4.5 years) completed 3 data collection sessions. Each session included a 5-minute treadmill jog followed by 1 of the stretch treatments: no stretching (NS), static stretching (SS), or dynamic stretching (DS). After the jog and stretch treatment, the participant performed a sit-and-reach test. Next, the participant completed a series of 10 maximal-effort CMJs, during which he was asked to jump as quickly as possible after seeing a visual stimulus (light). The CMJ height and reaction time were determined from measured ground reaction forces. A treatment × jump repeated-measures analysis of variance for CMJ height revealed a significant main effect of treatment (p = 0.004). The CMJ height was greater for DS (43.0 cm) than for NS (41.4 cm) and SS (41.9 cm) and was not less for SS than for NS. Analysis also revealed a significant main effect of jump (p = 0.005) on CMJ height: Jump height decreased from the early to the late jumps. The analysis of reaction time showed no significant effect of treatment. Treatment had a main effect (p < 0.001) on flexibility, however. Flexibility was greater after both SS and DS compared to after NS, with no difference in flexibility between SS and DS. Athletes in sports requiring lower-extremity power should use DS techniques in warm-up to enhance flexibility while improving performance.

Increases of Chamber Height and Base Diameter Have Contrasting Effects on Grazing Rate of Two Cladoceran Species: Implications for Microcosm Studies.

PubMed

Pan, Ying; Zhang, Yunshu; Peng, Yan; Zhao, Qinghua; Sun, Shucun

2015-01-01

Aquatic microcosm studies often increase either chamber height or base diameter (to increase water volume) to test spatial ecology theories such as "scale" effects on ecological processes, but it is unclear whether the increase of chamber height or base diameter have the same effect on the processes, i.e., whether the effect of the shape of three-dimensional spaces is significant. We orthogonally manipulated chamber height and base diameter and determined swimming activity, average swimming velocity and grazing rates of the cladocerans Daphnia magna and Moina micrura (on two algae Scenedesmus quadricauda and Chlorella vulgaris; leading to four aquatic algae-cladoceran systems in total) under different microcosm conditions. Across all the four aquatic systems, increasing chamber height at a given base diameter significantly decreased the duration and velocity of horizontal swimming, and it tended to increase the duration but decrease the velocity of vertical swimming. These collectively led to decreases in both average swimming velocity and grazing rate of the cladocerans in the tall chambers (at a given base diameter), in accordance with the positive relationship between average swimming velocity and grazing rate. In contrast, an increase of base diameter at a given chamber height showed contrasting effects on the above parameters. Consistently, at a given chamber volume increasing ratio of chamber height to base diameter decreased the average swimming velocity and grazing rate across all the aquatic systems. In general, increasing chamber depth and base diameter may exert contrasting effects on zooplankton behavior and thus phytoplankton-zooplankton interactions. We suggest that spatial shape plays an important role in determining ecological process and thus should be considered in a theoretical framework of spatial ecology and also the physical setting of aquatic microcosm experiments.

The Effects of Caffeine on Vertical Jump Height and Execution in Collegiate Athletes.

PubMed

Bloms, Lucas P; Fitzgerald, John S; Short, Martin W; Whitehead, James R

2016-07-01

Bloms, LP, Fitzgerald, JS, Short, MW, and Whitehead, JR. The effects of caffeine on vertical jump height and execution in collegiate athletes. J Strength Cond Res 30(7): 1855-1861, 2016-Caffeine ingestion elicits a variety of physiological effects that may be beneficial to maximal-intensity exercise performance, although its effectiveness and physical mechanism of action enhancing ballistic task performance are unclear. The purpose of this study was to examine the effects of caffeine ingestion on vertical jump height and jump execution in Division I collegiate athletes. The study used a single-blind, randomized, crossover design. Athletes (n = 25) consumed either caffeine (5 mg·kg) or placebo. After a 60-minute waiting period, athletes performed 3 squat jumps (SJ) and 3 countermovement jumps (CMJ) while standing on a force platform. Jump height and execution variables were calculated from mechanography data. In comparison with placebo, caffeine increased SJ height (32.8 ± 6.2 vs. 34.5 ± 6.7 cm; p = 0.001) and CMJ height (36.4 ± 6.9 vs. 37.9 ± 7.4 cm; p = 0.001). Peak force (p = 0.032) and average rate of force development (p = 0.037) were increased during the CMJ in the caffeine trail compared with the control. Time to half peak force was the only execution variable improved with caffeine (p = 0.019) during the SJ. It seems that caffeine affects both height and execution of jumping. Our data indicate that the physical mechanism of jump enhancement is increased peak force production or rate of force development during jumping depending on technique. The physical mechanism of jump enhancement suggests that the ergogenic effects of caffeine may transfer to other ballistic tasks involving the lower-body musculature in collegiate athletes.

Increases of Chamber Height and Base Diameter Have Contrasting Effects on Grazing Rate of Two Cladoceran Species: Implications for Microcosm Studies

PubMed Central

Pan, Ying; Zhang, Yunshu; Peng, Yan; Zhao, Qinghua; Sun, Shucun

2015-01-01

Aquatic microcosm studies often increase either chamber height or base diameter (to increase water volume) to test spatial ecology theories such as “scale” effects on ecological processes, but it is unclear whether the increase of chamber height or base diameter have the same effect on the processes, i.e., whether the effect of the shape of three-dimensional spaces is significant. We orthogonally manipulated chamber height and base diameter and determined swimming activity, average swimming velocity and grazing rates of the cladocerans Daphnia magna and Moina micrura (on two algae Scenedesmus quadricauda and Chlorella vulgaris; leading to four aquatic algae-cladoceran systems in total) under different microcosm conditions. Across all the four aquatic systems, increasing chamber height at a given base diameter significantly decreased the duration and velocity of horizontal swimming, and it tended to increase the duration but decrease the velocity of vertical swimming. These collectively led to decreases in both average swimming velocity and grazing rate of the cladocerans in the tall chambers (at a given base diameter), in accordance with the positive relationship between average swimming velocity and grazing rate. In contrast, an increase of base diameter at a given chamber height showed contrasting effects on the above parameters. Consistently, at a given chamber volume increasing ratio of chamber height to base diameter decreased the average swimming velocity and grazing rate across all the aquatic systems. In general, increasing chamber depth and base diameter may exert contrasting effects on zooplankton behavior and thus phytoplankton-zooplankton interactions. We suggest that spatial shape plays an important role in determining ecological process and thus should be considered in a theoretical framework of spatial ecology and also the physical setting of aquatic microcosm experiments. PMID:26273836

Developments in the Aerosol Layer Height Retrieval Algorithm for the Copernicus Sentinel-4/UVN Instrument

NASA Astrophysics Data System (ADS)

Nanda, Swadhin; Sanders, Abram; Veefkind, Pepijn

2016-04-01

The Sentinel-4 mission is a part of the European Commission's Copernicus programme, the goal of which is to provide geo-information to manage environmental assets, and to observe, understand and mitigate the effects of the changing climate. The Sentinel-4/UVN instrument design is motivated by the need to monitor trace gas concentrations and aerosols in the atmosphere from a geostationary orbit. The on-board instrument is a high resolution UV-VIS-NIR (UVN) spectrometer system that provides hourly radiance measurements over Europe and northern Africa with a spatial sampling of 8 km. The main application area of Sentinel-4/UVN is air quality. One of the data products that is being developed for Sentinel-4/UVN is the Aerosol Layer Height (ALH). The goal is to determine the height of aerosol plumes with a resolution of better than 0.5 - 1 km. The ALH product thus targets aerosol layers in the free troposphere, such as desert dust, volcanic ash and biomass during plumes. KNMI is assigned with the development of the Aerosol Layer Height (ALH) algorithm. Its heritage is the ALH algorithm developed by Sanders and De Haan (ATBD, 2016) for the TROPOMI instrument on board the Sentinel-5 Precursor mission that is to be launched in June or July 2016 (tentative date). The retrieval algorithm designed so far for the aerosol height product is based on the absorption characteristics of the oxygen-A band (759-770 nm). The algorithm has heritage to the ALH algorithm developed for TROPOMI on the Sentinel 5 precursor satellite. New aspects for Sentinel-4/UVN include the higher resolution (0.116 nm compared to 0.4 for TROPOMI) and hourly observation from the geostationary orbit. The algorithm uses optimal estimation to obtain a spectral fit of the reflectance across absorption band, while assuming a single uniform layer with fixed width to represent the aerosol vertical distribution. The state vector includes amongst other elements the height of this layer and its aerosol optical thickness. We will present the development work around the ALH retrieval algorithm in the framework of the Sentinel-4/UVN instrument. The main challenges are highlighted and retrieval simulation results are provided. Also, an outlook towards application of the S4 bread board algorithm to Sentinel-5 Precursor data later this year will be discussed.

Modeling the height of young forests regenerating from recent disturbances in Mississippi using Landsat and ICESat data

USGS Publications Warehouse

Li, Ainong; Huang, Chengquan; Sun, Guoqing; Shi, Hua; Toney, Chris; Zhu, Zhiliang; Rollins, Matthew G.; Goward, Samuel N.; Masek, Jeffery G.

2011-01-01

Many forestry and earth science applications require spatially detailed forest height data sets. Among the various remote sensing technologies, lidar offers the most potential for obtaining reliable height measurement. However, existing and planned spaceborne lidar systems do not have the capability to produce spatially contiguous, fine resolution forest height maps over large areas. This paper describes a Landsat–lidar fusion approach for modeling the height of young forests by integrating historical Landsat observations with lidar data acquired by the Geoscience Laser Altimeter System (GLAS) instrument onboard the Ice, Cloud, and land Elevation (ICESat) satellite. In this approach, “young” forests refer to forests reestablished following recent disturbances mapped using Landsat time-series stacks (LTSS) and a vegetation change tracker (VCT) algorithm. The GLAS lidar data is used to retrieve forest height at sample locations represented by the footprints of the lidar data. These samples are used to establish relationships between lidar-based forest height measurements and LTSS–VCT disturbance products. The height of “young” forest is then mapped based on the derived relationships and the LTSS–VCT disturbance products. This approach was developed and tested over the state of Mississippi. Of the various models evaluated, a regression tree model predicting forest height from age since disturbance and three cumulative indices produced by the LTSS–VCT method yielded the lowest cross validation error. The R2 and root mean square difference (RMSD) between predicted and GLAS-based height measurements were 0.91 and 1.97 m, respectively. Predictions of this model had much higher errors than indicated by cross validation analysis when evaluated using field plot data collected through the Forest Inventory and Analysis Program of USDA Forest Service. Much of these errors were due to a lack of separation between stand clearing and non-stand clearing disturbances in current LTSS–VCT products and difficulty in deriving reliable forest height measurements using GLAS samples when terrain relief was present within their footprints. In addition, a systematic underestimation of about 5 m by the developed model was also observed, half of which could be explained by forest growth that occurred between field measurement year and model target year. The remaining difference suggests that tree height measurements derived using waveform lidar data could be significantly underestimated, especially for young pine forests. Options for improving the height modeling approach developed in this study were discussed.

Modeling the Height of Young Forests Regenerating from Recent Disturbances in Mississippi using Landsat and ICESat data

NASA Technical Reports Server (NTRS)

Li, Ainong; Huang, Chengquan; Sun, Guoqing; Shi, Hua; Toney, Chris; Zhu, Zhiliang; Rollins, Matthew G.; Goward, Samuel N.; Masek, Jeffrey G.

2011-01-01

Many forestry and earth science applications require spatially detailed forest height data sets. Among the various remote sensing technologies, lidar offers the most potential for obtaining reliable height measurement. However, existing and planned spaceborne lidar systems do not have the capability to produce spatially contiguous, fine resolution forest height maps over large areas. This paper describes a Landsat-lidar fusion approach for modeling the height of young forests by integrating historical Landsat observations with lidar data acquired by the Geoscience Laser Altimeter System (GLAS) instrument onboard the Ice, Cloud, and land Elevation (ICESat) satellite. In this approach, "young" forests refer to forests reestablished following recent disturbances mapped using Landsat time-series stacks (LTSS) and a vegetation change tracker (VCT) algorithm. The GLAS lidar data is used to retrieve forest height at sample locations represented by the footprints of the lidar data. These samples are used to establish relationships between lidar-based forest height measurements and LTSS-VCT disturbance products. The height of "young" forest is then mapped based on the derived relationships and the LTSS-VCT disturbance products. This approach was developed and tested over the state of Mississippi. Of the various models evaluated, a regression tree model predicting forest height from age since disturbance and three cumulative indices produced by the LTSS-VCT method yielded the lowest cross validation error. The R(exp 2) and root mean square difference (RMSD) between predicted and GLAS-based height measurements were 0.91 and 1.97 m, respectively. Predictions of this model had much higher errors than indicated by cross validation analysis when evaluated using field plot data collected through the Forest Inventory and Analysis Program of USDA Forest Service. Much of these errors were due to a lack of separation between stand clearing and non-stand clearing disturbances in current LTSS-VCT products and difficulty in deriving reliable forest height measurements using GLAS samples when terrain relief was present within their footprints. In addition, a systematic underestimation of about 5 m by the developed model was also observed, half of which could be explained by forest growth that occurred between field measurement year and model target year. The remaining difference suggests that tree height measurements derived using waveform lidar data could be significantly underestimated, especially for young pine forests. Options for improving the height modeling approach developed in this study were discussed.

Simulation Studies of the Effect of Forest Spatial Structure on InSAR Signature

NASA Technical Reports Server (NTRS)

Sun, Guoqing; Liu, Dawei; Ranson, K. Jon; Koetz, Benjamin

2007-01-01

The height of scattering phase retrieved from InSAR data is considered being correlated with the tree height and the spatial structure of the forest stand. Though some researchers have used simple backscattering models to estimate tree height from the height of scattering center, the effect of forest spatial structure on InSAR data is not well understood yet. A three-dimensional coherent radar backscattering model for forest canopies based on realistic three-dimensional scene was used to investigate the effect in this paper. The realistic spatial structure of forest canopies was established either by field measurements (stem map) or through use of forest growth model. Field measurements or a forest growth model parameterized using local environmental parameters provides information of forest species composition and tree sizes in certain growth phases. A fractal tree model (L-system) was used to simulate individual 3- D tree structure of different ages or heights. Trees were positioned in a stand in certain patterns resulting in a 3-D medium of discrete scatterers. The radar coherent backscatter model took the 3-D forest scene as input and simulates the coherent radar backscattering signature. Interferometric SAR images of 3D scenes were simulated and heights of scattering phase centers were estimated from the simulated InSAR data. The effects of tree height, crown cover, crown depth, and the spatial distribution patterns of trees on the scattering phase center were analyzed. The results will be presented in the paper.

Genotype x environment interactions in postweaning performance to yearling in Angus, Brahman, and reciprocal-cross calves.

PubMed

Brown, M A; Brown, A H; Jackson, W G; Miesner, J R

1993-12-01

Data from 431 Angus, Brahman, and reciprocal-cross calves were used to evaluate performance from weaning to yearling in calves managed during the winter on dormant common bermudagrass or endophyte-infected tall fescue (backgrounding environments). Calves on bermudagrass were weaned at heavier weights (P < .01) but gained less postweaning (P < .01). Weights at 365 d, 365-d hip heights, and 365-d weight:height ratios were similar between calves on different backgrounding environments averaged over breed. There was evidence that heterosis for postweaning ADG was larger in calves managed on endophyte-infected tall fescue (P < .05), but heterosis estimates for 205-d weight, 365-d weight, 365-d hip height, and 365-d weight:height were similar between backgrounding environments. Maternal and direct effects did not significantly interact with backgrounding environment, but there was a trend for maternal effects of 205-d weight, 365-d weight, and 365-d weight:height to be larger on the common bermudagrass environment than on the tall fescue environment. There was also a trend for direct breed effects for postweaning ADG and 365-d hip height to be larger on the common bermudagrass environment. These data indicated that genetic effects may vary with production environment and that consideration should be given to environment when developing crossbreeding systems.

Influence of bioassay volume, water column height, and octanol-water partition coefficient on the toxicity of pesticides to rainbow trout.

PubMed

Altinok, Ilhan; Capkin, Erol; Boran, Halis

2011-06-01

Effects of water volume and water column height on toxicity of cypermethrin, carbaryl, dichlorvos, tetradifon, maneb, captan, carbosulfan endosulfan and HgCl₂ to juvenile rainbow trout (Oncorhynchus mykiss, 3.2 ± 0.7 g) were evaluated in different glass aquaria under static conditions. When fish were exposed to the chemical compounds in 23 cm water column height (25 L), their mortality ranged between 0% and 58%. At the same water volume, but lower water column height (9 cm), mortality of fish increased significantly and was in a range from 60% to 95%. At the same water column height, toxic effects of chemicals were significantly higher in 25 L water volume than that of 8.5 L, water except maneb which has lowest (-0.45) octanol-water partition coefficient value. Mortality rates ratio of 9 and 23 cm water column height ranged between 1.12 and 90 while mortality rates ratio of 9 and 25 L water volume ranged between 1.20 and 4.0. Because actual exposure concentrations were not affected by either water volume or water column height, we propose that increased pesticides' toxicity was related to an increase in bioassay volume, since more pesticide molecules were able to interact with or accumulate the fish. However, there seem to be no relationship between the effects of water volume, water column height and Kow value of chemicals with regard to toxicity in juvenile rainbow trout.

Error correction for IFSAR

DOEpatents

Doerry, Armin W.; Bickel, Douglas L.

2002-01-01

IFSAR images of a target scene are generated by compensating for variations in vertical separation between collection surfaces defined for each IFSAR antenna by adjusting the baseline projection during image generation. In addition, height information from all antennas is processed before processing range and azimuth information in a normal fashion to create the IFSAR image.

Effects of balance ability and handgrip height on kinematics of the gait, torso, and pelvis in elderly women using a four-wheeled walker.

PubMed

Choi, Hyuk-Jae; Ko, Chang-Yong; Kang, Sungjae; Ryu, Jeicheong; Mun, Museong; Jeon, Hye-Seon

2015-02-01

Numerous elderly individuals use the four-wheeled walker (FWW) as a gait-assistive device. The walker's handgrip height is important for correct use. However, few clinical studies have investigated the biomechanical effects of the FWW's handgrip height on balance. Therefore, the present study assessed kinematic features of the gait, torso and pelvis during use of the FWW at two levels of handgrip height (48% vs 55% of the subject's height) while assessing balance in older adults. A total of 20 older adults were allocated into two groups according to the Berg Balance Scale (BBS): good balance (GB; BBS≥46) versus poor balance (PB; BBS<45). Participants walked with the FWW at 48% or 55% handgrip height for 10 m. Our study showed that the double-support period and stance phase significantly increased at 55% handgrip height, but the swing phase significantly decreased in the GB group. In the PB group, velocity and stride length significantly increased at 55% handgrip height. Tilt angle of the torso in the GB group was significantly lower at 55% than at 48% handgrip height, but no differences were observed in the PB group. In the pelvis, initial contact and toe-off angles of tilt were lower in the GB group at 55% handgrip height, but no differences were observed in the PB group. These results showed that kinematic features of the gait, torso, and pelvis in older adults using the FWW might be dependent on the handgrip height of the FWW and the patient's balance. Additionally, greater than 48% of the body height might be appropriate for older adults with poor balance. © 2014 Japan Geriatrics Society.

[MITOCHONDRIA-TARGETED ANTIOXIDANTS IN THE PREVENTION OF THE CORNEA EROSION WHEN PERFORMING SURGERY UNDER GENERAL ANESTHESIA.

PubMed

Gusev, E A; Chemodanov, D V; Sungurov, V A; Neverovsky, E A; Grebenchikov, O A; Likhvantsev, V V

2017-09-01

Despite the use of modern methods of prevention, at least 10% of patients operated on for ophthalmic indications not develop corneal erosion as the indirect complication of general anesthesia. To reduce the number of ophthalmic complications of general anesthesia by prophylactic use of new mito- chondria-targeted antioxidants - Vizomitin (eye drops). 70 patients, which was supposed to perform the average duration of operations under general anesthesia were randomized into 3 groups depending on the method specific (pharmacological) prevention of corneal erosions: (1) control (specic (pharmacological) prevention was not carried out), (2), using preparation "natural tear, and (3) "Vizomitin" preparation. Postoperative biomicroscopy was performed to assess the condition of the cornea, tear film stability was measured and the height of the tear meniscus. When using eye drops "Vizomitin" value is an indicator of stability of the tear film on the 3rd day after the operation more than in the control group of patients by 51% (p = 0.012) and patients groups, natural tear by 57% (p = 0.013). Surgical interventions performed under general anesthesia, leading to an increase in the number ofpatients with decreased tear meniscus height index of the control group with 4 to 7 patients (p = 0.30) in the group of natural tear from 3 to 11 patients (p = 0.008) . In the group with drug "Vizomitin" the number of such patients is reduced from 7 to 1 (p = 0.018). In the surgical procedures under general anesthesia eye drops "Vizomitin" effectively prevents the devel- opment of corneal erosion.

Increased prevalence of growth hormone deficiency in patients with vernal keratoconjuntivitis; an interesting new association.

PubMed

Stagi, Stefano; Pucci, Neri; di Grande, Laura; de Libero, Cinzia; Caputo, Roberto; Pantano, Stefano; Seminara, Salvatore; de Martino, Maurizio; Novembre, Elio

2014-01-01

Vernal keratoconjunctivitis (VKC) is a chronic conjunctivitis that mainly affects children living in temperate areas. The notable difference between genders and VKC's resolution with puberty have persistently suggested a role of hormonal factors in VKC development. To describe six cases of males with VKC and growth hormone deficiency (GHD) reported as a long-term follow-up during rhGH treatment. Six consecutive male patients (median age at GHD diagnosis 9.7, range 7.9 to 13.1 years) with VKC, were recruited from July 2005 to July 2013 at the Paediatric Endocrinology Unit of Anna Meyer Children's Hospital in Florence, Italy. In these patients, anthropometric data were collected periodically. In three of these patients, data were collected to near-adult or adult height. Familial history was uneventful for all patients. The target height was normal, ranging from 0.65 standard deviation scores (SDS) to 2.01 SDS. The patients showed a normal birth-weight (from -1.21 to 1.35 SDS) and birth-length (from -0.93 to 1.21 SDS). At GHD diagnosis, all of the patients exhibited demonstrated important growth retardation (from -2.05 to -2.78 SDS). Plasmatic concentrations of IGF-1 and IGFBP-3 were low (from -1.85 to -3 SDS and from -1.81 to -2.76 SDS, respectively). GH stimulation tests showed classic GHD symptoms in all of the patients. Pubertal onset was normal. All of the patients treated with rhGH responded well to rhGH treatment. Adult height, evaluated in three patients, was in accordance with their target height. To our current knowledge, we have described for the first time six patients affected by VKC with GH deficiency, in some of whom we performed a long-term follow-up to adult height. Further studies will be needed to establish whether GHD may be a common feature of VKC patients. Nevertheless, it appears to be useful to carefully follow statural growth of VKC patients, while the possibility of a GH deficiency must to be taken into account in the presence of growth failure.

The effect of dropping height on jumping performance in trained and untrained prepubertal boys and girls.

PubMed

Bassa, Eleni I; Patikas, Dimitrios A; Panagiotidou, Aikaterini I; Papadopoulou, Sophia D; Pylianidis, Theofilos C; Kotzamanidis, Christos M

2012-08-01

Plyometric training in children, including different types of jumps, has become common practice during the last few years in different sports, although there is limited information about the adaptability of children with respect to different loads and the differences in performance between various jump types. The purpose of this study was to examine the effect of gender and training background on the optimal drop jump height of 9- to 11-year-old children. Sixty prepubertal (untrained and track and field athletes, boys and girls, equally distributed in each group [n = 15]), performed the following in random order: 3 squat jumps, 3 countermovement jumps (CMJs) and 3 drop jumps from heights of 10, 20, 30, 40, and 50 cm. The trial with the best performance in jump height of each test was used for further analysis. The jump type significantly affected the jump height. The jump height during the CMJ was the highest among all other jump types, resulting in advanced performance for both trained and untrained prepubertal boys and girls. However, increasing the dropping height did not change the jumping height or contact time during the drop jump. This possibly indicates an inability of prepubertal children to use their stored elastic energy to increase jumping height during drop jumps, irrespective of their gender or training status. This indicates that children, independent of gender and training status, have no performance gain during drop jumps from heights up to 50 cm, and therefore, it is recommended that only low drop jump heights be included in plyometric training to limit the probability of sustaining injuries.

Quantification of nearshore morphology based on video imaging

USGS Publications Warehouse

Alexander, P.S.; Holman, R.A.

2004-01-01

The Argus network is a series of video cameras with aerial views of beaches around the world. Intensity contrasts in time exposure images reveal areas of preferential breaking, which are closely tied to underlying bed morphology. This relationship was further investigated, including the effect of tidal elevation and wave height on the presence of wave breaking and its cross-shore position over sand bars. Computerized methods of objectively extracting shoreline and sand bar locations were developed, allowing the vast quantity of data generated by Argus to be more effectively examined. Once features were identified in the images, daily alongshore mean values were taken to create time series of shoreline and sand bar location, which were analyzed for annual cycles and cross-correlated with wave data to investigate environmental forcing and response. These data extraction techniques were applied to images from four of the Argus camera sites. A relationship between wave height and shoreline location was found in which increased wave heights resulted in more landward shoreline positions; given the short lag times over which this correlation was significant, and that the strong annual signal in wave height was not replicated in the shoreline time series, it is likely that this relationship is a result of set-up during periods of large waves. Wave height was also found to have an effect on sand bar location, whereby an increase in wave height resulted in offshore bar migration. This correlation was significant over much longer time lags than the relationship between wave height and shoreline location, and a strong annual signal was found in the location of almost all observed bars, indicating that the sand bars are migrating with changes in wave height. In the case of the site with multiple sand bars, the offshore bars responded more significantly to changes in wave height, whereas the innermost bar seemed to be shielded from incident wave energy by breaking over the other bars. A relationship was also found between a site's mean wave height and inner sand bar location; sites with the highest wave heights tended to have sand bars farther from shore than those with relatively low wave heights. ?? 2004 Elsevier B.V. All rights reserved.

No evidence of carbon limitation with tree age and height in Nothofagus pumilio under Mediterranean and temperate climate conditions

PubMed Central

Piper, Frida I.; Fajardo, Alex

2011-01-01

Background and Aims Trees universally decrease their growth with age. Most explanations for this trend so far support the hypothesis that carbon (C) gain becomes limited with age; though very few studies have directly assessed the relative reductions of C gain and C demand with tree age. It has also been suggested that drought enhances the effect of C gain limitation in trees. Here tests were carried out to determine whether C gain limitation is causing the growth decay with tree age, and whether drought accentuates its effect. Methods The balance between C gain and C demand across tree age and height ranges was estimated. For this, the concentration of non-structural carbohydrates (NSCs) in stems and roots of trees of different ages and heights was measured in the deciduous temperate species Nothofagus pumilio. An ontogenetic decrease in NSCs indicates support for C limitation. Furthermore, the importance of drought in altering the C balance with ontogeny was assessed by sampling the same species in Mediterranean and humid climate locations in the southern Andes of Chile. Wood density (WD) and stable carbon isotope ratios (δ13C) were also determined to examine drought constraints on C gain. Key Results At both locations, it was effectively found that tree growth ultimately decreased with tree age and height. It was found, however, that NSC concentrations did not decrease with tree age or height when WD was considered, suggesting that C limitation is not the ultimate mechanism causing the age/height-related declining tree growth. δ13C decreased with tree age/height at the Mediterranean site only; drought effect increased with tree age/height, but this pattern was not mirrored by the levels of NSCs. Conclusions The results indicate that concentrations of C storage in N. pumilio trees do not decrease with tree age or height, and that reduced C assimilation due to summer drought does not alter this pattern. PMID:21852277

Climate and the weight/height relationship in sub-Saharan Africa.

PubMed

Hiernaux, J; Rudan, P; Brambati, A

1975-01-01

25 populations of the rain forest and 44 of the open country, all descended from the West-Central African stock which lived in the latter biome, are compared for body weight and height. On a log weight/height diagram, the 69 populations cluster along a straight line which intersects the lines of equal body weight/surface ratio: the shorter the body size, the lower the ratio tends to be. The rain forest populations are concentrated in the lower part of the bivariate distribution. The shortest one, the Mbuti Pygmies, has a very low ratio despite a relatively heavy weight. The shorter stature of the rain forest populations seems to be largely genetic in origin; it probably results from selective pressure exerted by the thermal stres in this hot and wet biome where sweating is of low thermolytic efficiency. The amount of reduction of adult stature depends for a large part on the number of generations spent in the forest by the population. Line A (in figure 1) is similar to a growth trend. The 69 populations differ genetically by the target that growth has to reach on a common log weight/height trend line. They achieve this differentiation through different speeds of growth.

Anthropometric assessment of the nutritional status of preschool-age children in Cape Verde

PubMed Central

Wennberg, A.

1988-01-01

The nutritional status of preschool-age children (0-6 years old) in Cape Verde was assessed using anthropometric measurements in a survey that involved 17 017 children from all regions of the country. About 26% of the estimated population in the target age group was included. Data were collected through primary health care centres during the latter part of 1983. The nutritional indicators weight-for-height, weight-for-age, and height-for-age were compared with reference data from the U.S. National Center for Health Statistics. Values of the indicators below -2 standard deviations of the median were considered to represent moderate undernutrition, while values below -3 standard deviations were taken to indicate severe malnutrition. The prevalence of low weight-for-height (wasting) was 2.5%, while that of severe wasting was 0.6%. The corresponding prevalences of low height-for-age and weight-for-age were 13.1% and 17.2%, respectively, with severe categories representing 2.3% and 6.1%, respectively, of the cases in the total sample. There is therefore a relatively strong tendency towards growth retardation or chronic, moderate nutritional deprivation in preschool-age children in Cape Verde, although there exist interregional variations. PMID:3262443

Modeling a secular trend by Monte Carlo simulation of height biased migration in a spatial network.

PubMed

Groth, Detlef

2017-04-01

Background: In a recent Monte Carlo simulation, the clustering of body height of Swiss military conscripts within a spatial network with characteristic features of the natural Swiss geography was investigated. In this study I examined the effect of migration of tall individuals into network hubs on the dynamics of body height within the whole spatial network. The aim of this study was to simulate height trends. Material and methods: Three networks were used for modeling, a regular rectangular fishing net like network, a real world example based on the geographic map of Switzerland, and a random network. All networks contained between 144 and 148 districts and between 265-307 road connections. Around 100,000 agents were initially released with average height of 170 cm, and height standard deviation of 6.5 cm. The simulation was started with the a priori assumption that height variation within a district is limited and also depends on height of neighboring districts (community effect on height). In addition to a neighborhood influence factor, which simulates a community effect, body height dependent migration of conscripts between adjacent districts in each Monte Carlo simulation was used to re-calculate next generation body heights. In order to determine the direction of migration for taller individuals, various centrality measures for the evaluation of district importance within the spatial network were applied. Taller individuals were favored to migrate more into network hubs, backward migration using the same number of individuals was random, not biased towards body height. Network hubs were defined by the importance of a district within the spatial network. The importance of a district was evaluated by various centrality measures. In the null model there were no road connections, height information could not be delivered between the districts. Results: Due to the favored migration of tall individuals into network hubs, average body height of the hubs, and later, of the whole network increased by up to 0.1 cm per iteration depending on the network model. The general increase in height within the network depended on connectedness and on the amount of height information that was exchanged between neighboring districts. If higher amounts of neighborhood height information were exchanged, the general increase in height within the network was large (strong secular trend). The trend in the homogeneous fishnet like network was lowest, the trend in the random network was highest. Yet, some network properties, such as the heteroscedasticity and autocorrelations of the migration simulation models differed greatly from the natural features observed in Swiss military conscript networks. Autocorrelations of district heights for instance, were much higher in the migration models. Conclusion: This study confirmed that secular height trends can be modeled by preferred migration of tall individuals into network hubs. However, basic network properties of the migration simulation models differed greatly from the natural features observed in Swiss military conscripts. Similar network-based data from other countries should be explored to better investigate height trends with Monte Carlo migration approach.

Childhood Sexual Abuse Moderates the Relationship Between Obesity and Mental Health in Low-Income Women.

PubMed

Ramirez, Jennifer C; Milan, Stephanie

2016-02-01

We examined whether a history of self-reported childhood sexual abuse (CSA) moderates the relationship between obesity and mental health symptoms (depression, anxiety, and posttraumatic stress disorder) in an ethnically diverse sample of low-income women. A community sample of 186 women completed self-report measures and had their weight and height measured. Body mass index and CSA had an interactive effect on all mental health measures, such that obese women with a CSA history reported substantially higher levels of all symptoms. These results give greater specificity to the obesity-mental health link reported in previous studies and provide possible directions for targeted intervention. © The Author(s) 2015.

Response to long-term growth hormone therapy in patients affected by RASopathies and growth hormone deficiency: Patterns of growth, puberty and final height data.

PubMed

Tamburrino, Federica; Gibertoni, Dino; Rossi, Cesare; Scarano, Emanuela; Perri, Annamaria; Montanari, Francesca; Fantini, Maria Pia; Pession, Andrea; Tartaglia, Marco; Mazzanti, Laura

2015-11-01

RASopathies are developmental disorders caused by heterozygous germline mutations in genes encoding proteins in the RAS-MAPK signaling pathway. Reduced growth is a common feature. Several studies generated data on growth, final height (FH), and height velocity (HV) after growth hormone (GH) treatment in patients with these disorders, particularly in Noonan syndrome, the most common RASopathy. These studies, however, refer to heterogeneous cohorts in terms of molecular information, GH status, age at start and length of therapy, and GH dosage. This work reports growth data in 88 patients affected by RASopathies with molecularly confirmed diagnosis, together with statistics on body proportions, pubertal pattern, and FH in 33, including 16 treated with GH therapy for proven GH deficiency. Thirty-three patients showed GH deficiency after pharmacological tests, and were GH-treated for an average period of 6.8 ± 4.8 years. Before starting therapy, HV was -2.6 ± 1.3 SDS, and mean basal IGF1 levels were -2.0 ± 1.1 SDS. Long-term GH therapy, starting early during childhood, resulted in a positive height response compared with untreated patients (1.3 SDS in terms of height-gain), normalizing FH for Ranke standards but not for general population and Target Height. Pubertal timing negatively affected pubertal growth spurt and FH, with IGF1 standardized score increased from -2.43 to -0.27 SDS. During GH treatment, no significant change in bone age velocity, body proportions, or cardiovascular function was observed. © 2015 Wiley Periodicals, Inc.

Measuring perceived ceiling height in a visual comparison task.

PubMed

von Castell, Christoph; Hecht, Heiko; Oberfeld, Daniel

2017-03-01

When judging interior space, a dark ceiling is judged to be lower than a light ceiling. The method of metric judgments (e.g., on a centimetre scale) that has typically been used in such tasks may reflect a genuine perceptual effect or it may reflect a cognitively mediated impression. We employed a height-matching method in which perceived ceiling height had to be matched with an adjustable pillar, thus obtaining psychometric functions that allowed for an estimation of the point of subjective equality (PSE) and the difference limen (DL). The height-matching method developed in this paper allows for a direct visual match and does not require metric judgment. It has the added advantage of providing superior precision. Experiment 1 used ceiling heights between 2.90 m and 3.00 m. The PSE proved sensitive to slight changes in perceived ceiling height. The DL was about 3% of the physical ceiling height. Experiment 2 found similar results for lower (2.30 m to 2.50 m) and higher (3.30 m to 3.50 m) ceilings. In Experiment 3, we additionally varied ceiling lightness (light grey vs. dark grey). The height matches showed that the light ceiling appeared significantly higher than the darker ceiling. We therefore attribute the influence of ceiling lightness on perceived ceiling height to a direct perceptual rather than a cognitive effect.

Olympic weightlifting training improves vertical jump height in sportspeople: a systematic review with meta-analysis.

PubMed

Hackett, Daniel; Davies, Tim; Soomro, Najeebullah; Halaki, Mark

2016-07-01

This systematic review was conducted to evaluate the effect of Olympic weightlifting (OW) on vertical jump (VJ) height compared to a control condition, traditional resistance training and plyometric training. Five electronic databases were searched using terms related to OW and VJ. Studies needed to include at least one OW exercise, an intervention lasting ≥6 weeks; a comparison group of control, traditional resistance training or plyometric training; and to have measured VJ height. The methodological quality of studies was assessed using the Downs and Black Checklist. Random and fixed effects meta-analyses were performed to pool the results of the included studies and generate a weighted mean effect size (ES). Six studies (seven articles) were included in the meta-analyses and described a total of 232 participants (175 athletes and 57 physical education students) with resistance training experience, aged 19.5±2.2 years. Three studies compared OW versus control; four studies compared OW versus traditional resistance training; and three studies compared OW versus plyometric training. Meta-analyses indicated OW improved VJ height by 7.7% (95% CI 3.4 to 5.4 cm) compared to control (ES=0.62, p=0.03) and by 5.1% (95% CI 2.2 to 3.0 cm) compared to traditional resistance training (ES=0.64 p=0.00004). Change in VJ height was not different for OW versus plyometric training. OW is an effective training method to improve VJ height. The similar effects observed for OW and plyometric training on VJ height suggests that either of these methods would be beneficial when devising training programmes to improve VJ height. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Noise-Enhanced Eversion Force Sense in Ankles With or Without Functional Instability.

PubMed

Ross, Scott E; Linens, Shelley W; Wright, Cynthia J; Arnold, Brent L

2015-08-01

Force sense impairments are associated with functional ankle instability. Stochastic resonance stimulation (SRS) may have implications for correcting these force sense deficits. To determine if SRS improved force sense. Case-control study. Research laboratory. Twelve people with functional ankle instability (age = 23 ± 3 years, height = 174 ± 8 cm, mass = 69 ± 10 kg) and 12 people with stable ankles (age = 22 ± 2 years, height = 170 ± 7 cm, mass = 64 ± 10 kg). The eversion force sense protocol required participants to reproduce a targeted muscle tension (10% of maximum voluntary isometric contraction). This protocol was assessed under SRSon and SRSoff (control) conditions. During SRSon, random subsensory mechanical noise was applied to the lower leg at a customized optimal intensity for each participant. Constant error, absolute error, and variable error measures quantified accuracy, overall performance, and consistency of force reproduction, respectively. With SRS, we observed main effects for force sense absolute error (SRSoff = 1.01 ± 0.67 N, SRSon = 0.69 ± 0.42 N) and variable error (SRSoff = 1.11 ± 0.64 N, SRSon = 0.78 ± 0.56 N) (P < .05). No other main effects or treatment-by-group interactions were found (P > .05). Although SRS reduced the overall magnitude (absolute error) and variability (variable error) of force sense errors, it had no effect on the directionality (constant error). Clinically, SRS may enhance muscle tension ability, which could have treatment implications for ankle stability.

PASSIVE SMOKING AND HEIGHT GROWTH OF PREADOLESCENT CHILDREN

EPA Science Inventory

The attained height and height growth of 9273 children participating in a longitudinal study of the health effects of air pollutants were analyzed to assess the association between passive exposure to cigarette smoke and physical growth between 6 and 11 years of age. Children wer...

Radiation May Indirectly Impair Growth Resulting in Reduced Standing Height via Subclinical Inflammation in Atomic-Bomb Survivors Exposed at Young Ages

DOE PAGES

Nakashima, Eiji; Neriishi, Kazuo; Hsu, Wan-Ling

2015-01-01

For youngmore » atomic-bomb (A-bomb) survivors, A-bomb radiation’s (total) effect on standing height is thought to comprise the sum of direct effect and indirect effect via inflammation. With the data of five inflammatory markers—white blood cell count, sialic acid, corrected erythrocyte sedimentation rate (ESR), α 1 globulin, and α 2 globulin—obtained in adulthood during the period 1988 to 1992, a summary inflammatory index was constructed as a surrogate for the five subclinical inflammatory markers. For 3,327 A-bomb survivors exposed at ages of less than 25 years, a structural equation model was analyzed to measure direct radiation effects on adult height as well as mediating effect of radiation via inflammation on the height after adjustment for other risk factors, smoking, cancer, inflammatory disease, obesity, and diabetes mellitus. The mediation proportion of the radiation effect on height via inflammation was approximately 5% for both sexes for all ages, and indirect dose effects via inflammation were statistically significant for both sexes combined and for females exposed at ages 0 to 5 years. Indirect dose effects for all ages via sialic acid, corrected ESR, and α 2 globulin were marginally significant for both sexes combined and for females. These proportions are likely underestimated.« less

Radiation May Indirectly Impair Growth Resulting in Reduced Standing Height via Subclinical Inflammation in Atomic-Bomb Survivors Exposed at Young Ages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakashima, Eiji; Neriishi, Kazuo; Hsu, Wan-Ling

For youngmore » atomic-bomb (A-bomb) survivors, A-bomb radiation’s (total) effect on standing height is thought to comprise the sum of direct effect and indirect effect via inflammation. With the data of five inflammatory markers—white blood cell count, sialic acid, corrected erythrocyte sedimentation rate (ESR), α 1 globulin, and α 2 globulin—obtained in adulthood during the period 1988 to 1992, a summary inflammatory index was constructed as a surrogate for the five subclinical inflammatory markers. For 3,327 A-bomb survivors exposed at ages of less than 25 years, a structural equation model was analyzed to measure direct radiation effects on adult height as well as mediating effect of radiation via inflammation on the height after adjustment for other risk factors, smoking, cancer, inflammatory disease, obesity, and diabetes mellitus. The mediation proportion of the radiation effect on height via inflammation was approximately 5% for both sexes for all ages, and indirect dose effects via inflammation were statistically significant for both sexes combined and for females exposed at ages 0 to 5 years. Indirect dose effects for all ages via sialic acid, corrected ESR, and α 2 globulin were marginally significant for both sexes combined and for females. These proportions are likely underestimated.« less

Utilization of O4 slant column density to derive aerosol layer height from a space-borne UV-visible hyperspectral sensor: sensitivity and case study

NASA Astrophysics Data System (ADS)

Park, Sang Seo; Kim, Jhoon; Lee, Hanlim; Torres, Omar; Lee, Kwang-Mog; Lee, Sang Deok

2016-02-01

The sensitivities of oxygen-dimer (O4) slant column densities (SCDs) to changes in aerosol layer height are investigated using the simulated radiances by a radiative transfer model, the linearized pseudo-spherical vector discrete ordinate radiative transfer (VLIDORT), and the differential optical absorption spectroscopy (DOAS) technique. The sensitivities of the O4 index (O4I), which is defined as dividing O4 SCD by 1040 molecules2 cm-5, to aerosol types and optical properties are also evaluated and compared. Among the O4 absorption bands at 340, 360, 380, and 477 nm, the O4 absorption band at 477 nm is found to be the most suitable to retrieve the aerosol effective height. However, the O4I at 477 nm is significantly influenced not only by the aerosol layer effective height but also by aerosol vertical profiles, optical properties including single scattering albedo (SSA), aerosol optical depth (AOD), particle size, and surface albedo. Overall, the error of the retrieved aerosol effective height is estimated to be 1276, 846, and 739 m for dust, non-absorbing, and absorbing aerosol, respectively, assuming knowledge on the aerosol vertical distribution shape. Using radiance data from the Ozone Monitoring Instrument (OMI), a new algorithm is developed to derive the aerosol effective height over East Asia after the determination of the aerosol type and AOD from the MODerate resolution Imaging Spectroradiometer (MODIS). About 80 % of retrieved aerosol effective heights are within the error range of 1 km compared to those obtained from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) measurements on thick aerosol layer cases.

Utilization of O4 Slant Column Density to Derive Aerosol Layer Height from a Space-Borne UV-Visible Hyperspectral Sensor: Sensitivity and Case Study

NASA Technical Reports Server (NTRS)

Park, Sang Seo; Kim, Jhoon; Lee, Hanlim; Torres, Omar; Lee, Kwang-Mog; Lee, Sang Deok

2016-01-01

The sensitivities of oxygen-dimer (O4) slant column densities (SCDs) to changes in aerosol layer height are investigated using the simulated radiances by a radiative transfer model, the linearized pseudo-spherical vector discrete ordinate radiative transfer (VLIDORT), and the differential optical absorption spectroscopy (DOAS) technique. The sensitivities of the O4 index (O4I), which is defined as dividing O4 SCD by 10(sup 40) molecules (sup 2) per centimeters(sup -5), to aerosol types and optical properties are also evaluated and compared. Among the O4 absorption bands at 340, 360, 380, and 477 nanometers, the O4 absorption band at 477 nanometers is found to be the most suitable to retrieve the aerosol effective height. However, the O4I at 477 nanometers is significantly influenced not only by the aerosol layer effective height but also by aerosol vertical profiles, optical properties including single scattering albedo (SSA), aerosol optical depth (AOD), particle size, and surface albedo. Overall, the error of the retrieved aerosol effective height is estimated to be 1276, 846, and 739 meters for dust, non-absorbing, and absorbing aerosol, respectively, assuming knowledge on the aerosol vertical distribution shape. Using radiance data from the Ozone Monitoring Instrument (OMI), a new algorithm is developed to derive the aerosol effective height over East Asia after the determination of the aerosol type and AOD from the MODerate resolution Imaging Spectroradiometer (MODIS). About 80 percent of retrieved aerosol effective heights are within the error range of 1 kilometer compared to those obtained from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) measurements on thick aerosol layer cases.

Utilization of O4 Slant Column Density to Derive Aerosol Layer Height from a Spaceborne UV-Visible Hyperspectral Sensor: Sensitivity and Case Study

NASA Technical Reports Server (NTRS)

Park, Sang Seo; Kim, Jhoon; Lee, Hanlim; Torres, Omar; Lee, Kwang-Mog; Lee, Sang Deok

2016-01-01

The sensitivities of oxygen-dimer (O4) slant column densities (SCDs) to changes in aerosol layer height are investigated using the simulated radiances by a radiative transfer model, the linearized pseudo-spherical vector discrete ordinate radiative transfer (VLIDORT), and the Differential Optical Absorption Spectroscopy (DOAS) technique. The sensitivities of the O4 index (O4I), which is defined as dividing O4 SCD by 10(exp 40) sq molecules cm(exp -5), to aerosol types and optical properties are also evaluated and compared. Among the O4 absorption bands at 340, 360, 380, and 477 nm, the O4 absorption band at 477 nm is found to be the most suitable to retrieve the aerosol effective height. However, the O4I at 477 nm is significantly influenced not only by the aerosol layer effective height but also by aerosol vertical profiles, optical properties including single scattering albedo (SSA), aerosol optical depth (AOD), particle size, and surface albedo. Overall, the error of the retrieved aerosol effective height is estimated to be 1276, 846, and 739 m for dust, non-absorbing, and absorbing aerosol, respectively, assuming knowledge on the aerosol vertical distribution shape. Using radiance data from the Ozone Monitoring Instrument (OMI), a new algorithm is developed to derive the aerosol effective height over East Asia after the determination of the aerosol type and AOD from the MODerate resolution Imaging Spectroradiometer (MODIS). About 80% of retrieved aerosol effective heights are within the error range of 1 km compared to those obtained from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) measurements on thick aerosol layer cases.

Tallness versus shrinkage: do women shrink with age or grow taller with recent birth date?

PubMed

Davies, K M; Recker, R R; Stegman, M R; Heaney, R P

1991-10-01

This paper presents evidence that much of the high rate of age-related height loss in women reported in cross-sectional studies is actually a cohort effect rather than an aging effect. Data from a large cross-sectional study of healthy, white American women indicate that there has been a gain in peak adult height of 1.0 cm per decade for several decades from 1900 through 1965. Data from the HES, HANES I, and HANES II studies concur on this point. By contrast, data from a longitudinal study of 191 healthy white U.S. women show only a trivial rate of decline from peak adult height in the fifth and sixth decades of life. In an unselected population, some apparent height loss with age is probably due to disease processes, such as vertebral collapse. Caution is needed in using aging to interpret differences in height and in height-dependent variables, such as bone density, in cross-sectional studies.

Height reduction among prenatally exposed atomic-bomb survivors: A longitudinal study of growth

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakashima, Eiji; Funamoto, Sachiyo; Carter, R.L.

Using a random coefficient regression model, sex-specific longitudinal analyses of height were made on 801 (392 male and 409 female) atomic-bomb survivors exposed in utero to detect dose effects on standing height. The data set resulted from repeated measurements of standing height of adolescents (age 10-18 y). The dose effect, if any, was assumed to be linear. Gestational ages at the time of radiation exposure were divided into trimesters. Since an earlier longitudinal data analysis has demonstrated radiation effects on height, the emphasis in this paper is on the interaction between dose and gestational age at exposure and radiation effectsmore » on the age of occurrence of the adolescent growth spurt. For males, a cubic polynomial growth-curve model applied to the data was affected significantly by radiation. The dose by trimester interaction effect was not significant. The onset of adolescent growth spurt was estimated at about 13 y at 0 Gy. There was no effect of radiation on the adolescent growth spurt For females, a quadratic polynomial growth-curve model was fitted to the data. The dose effect was significant, while the dose by trimester interaction was again not significant. 27 refs., 3 figs., 4 tabs.« less

The response to growth hormone treatment in prepubertal children with growth hormone deficiency in Japan: Comparing three consecutive years of treatment data of The Foundation for Growth Science in Japan between the 1990s and 2000s.

PubMed

Isojima, Tsuyoshi; Hasegawa, Tomonobu; Yokoya, Susumu; Tanaka, Toshiaki

2017-09-30

Growth hormone (GH) treatment for children with GH deficiency (GHD) is effective in improving adult height. To achieve favorable effects, GH treatment before puberty is very important, because prepubertal height gain is highly correlated with total height gain. However, no report has studied the effects by analyzing a nationwide data from recent GHD patients in Japan. We investigated the response to GH treatment using data compiled in the Foundation for Growth Science in Japan, and compared the effects between the 1990s and 2000s using analysis of covariance. We analyzed 534 prepubertal GHD subjects treated in the 2000s with three consecutive years of data from the start and investigated predictive factors for the effects. The cumulative height standard deviation score (SDS) change over three years of GH treatment was 0.91 ± 0.57 and 1.20 ± 0.62 in the 1990s and 2000s, respectively. Subjects in the 2000s were divided into three groups by severity, and the cumulative height SDS was 1.60 ± 0.93, 1.20 ± 0.54, and 1.00 ± 0.40 indicating severe, moderate, and mild GHD, respectively. Age and height SDS at the start and severity were identified as independent predictive factors. We also found a significant difference in the effects between the two cohorts after adjusting for the different factors (regression coefficient: -0.069, 95% confidence interval: -0.11 to -0.030, p = 0.0006), which might be due to the GH dose effect. We conclude that the effects of GH treatment in the 2000s had improved compared with those in the 1990s.

Titan-Like Exoplanets: Variations in Geometric Albedo and Effective Transit Height with Haze Production Rate

NASA Technical Reports Server (NTRS)

Checlair, Jade; McKay, Christopher P.; Imanaka, Hiroshi

2016-01-01

Extensive studies characterizing Titan present an opportunity to study the atmospheric properties of Titan-like exoplanets. Using an existing model of Titan's atmospheric haze, we computed geometric albedo spectra and effective transit height spectra for six values of the haze production rate (zero haze to twice present) over a wide range of wavelengths (0.2-2 microns). In the geometric albedo spectra, the slope in the UV-visible changes from blue to red when varying the haze production rate values from zero to twice the current Titan value. This spectral feature is the most effective way to characterize the haze production rates. Methane absorption bands in the visible-NIR compete with the absorbing haze, being more prominent for smaller haze production rates. The effective transit heights probe a region of the atmosphere where the haze and gas are optically thin and that is thus not effectively probed by the geometric albedo. The effective transit height decreases smoothly with increasing wavelength, from 376 km to 123 km at 0.2 and 2 microns, respectively. When decreasing the haze production rate, the methane absorption bands become more prominent, and the effective transit height decreases with a steeper slope with increasing wavelength. The slope of the geometric albedo in the UV-visible increases smoothly with increasing haze production rate, while the slope of the effective transit height spectra is not sensitive to the haze production rate other than showing a sharp rise when the haze production rate increases from zero. We conclude that geometric albedo spectra provide the most sensitive indicator of the haze production rate and the background Rayleigh gas. Our results suggest that important and complementary information can be obtained from the geometric albedo and motivates improvements in the technology for direct imaging of nearby exoplanets.

Effect of oxandrolone therapy on adult height in Turner syndrome patients treated with growth hormone: a meta-analysis.

PubMed

Sheanon, Nicole M; Backeljauw, Philippe F

2015-01-01

Turner syndrome is a chromosomal abnormality in which there is complete or partial absence of the X chromosome. Turner syndrome effects 1 in every 2000 live births. Short stature is a cardinal feature of Turner Syndrome and the standard treatment is recombinant human growth hormone. When growth hormone is started at an early age a normal adult height can be achieved. With delayed diagnosis young women with Turner Syndrome may not reach a normal height. Adjuvant therapy with oxandrolone is used but there is no consensus on the optimal timing of treatment, the duration of treatment and the long term adverse effects of treatment. The objective of this review and meta-analysis is to examine the effect of oxandrolone on adult height in growth hormone treated Turner syndrome patients. Eligible trials were identified by a literature search using the terms: Turner syndrome, oxandrolone. The search was limited to English language randomized-controlled trials after 1980. Twenty-six articles were reviewed and four were included in the meta-analysis. A random effects model was used to calculate an effect size and confidence interval. The pooled effect size of 2.0759 (95 % CI 0.0988 to 4.0529) indicates that oxandrolone has a positive effect on adult height in Turner syndrome when combined with growth hormone therapy. In conclusion, the addition of oxandrolone to growth hormone therapy for treatment of short stature in Turner syndrome improves adult height. Further studies are warranted to investigate if there is a subset of Turner syndrome patients that would benefit most from growth hormone plus oxandrolone therapy, and to determine the optimal timing and duration of such therapy.

An experimental investigation on the requirement of roof height and sill width for car ingress and egress.

PubMed

Causse, Julien; Wang, Xuguang; Denninger, Lisa

2012-01-01

This study aimed at experimentally investigating the influence of roof height and sill width on car ingress/egress movements. The first uncomfortable (Ht1) and the lowest acceptable (Ht2) roof heights were obtained from 26 participants of three different stature groups thanks to a multi-adjustable vehicle mock-up. Both Ht1 and Ht2 were affected neither by stature nor by vehicle type. Only a difference of 45 mm between Ht1 and Ht2 was observed. Tall volunteers more flexed the trunk and neck than short persons thanks to a larger space available around the seat when the head passing under the roof. The vehicle type had almost no effect on upper body posture. The roof height only affected neck flexion. The sill width mainly imposed a lateral translation. Results demonstrated that an appropriate roof height should be determined carefully. A small change of 45 mm in roof height may lead to an unacceptable situation. The present study experimentally investigated the effects of roof height and sill width on car ingress and egress movements. Short females required almost the same roof height as tall males due to smaller space around the seat. The results would help to optimise car dimensions for improving car accessibility.

War, forced displacement and growth in Laotian adults.

PubMed

Clarkin, Patrick F

2012-01-01

Evidence from several populations suggests that war negatively impacts civilian nutrition, physical growth and overall health. This effect is often enduring or permanent, particularly if experienced early in life. To assess whether the number of lifetime displacement experiences and being displaced in infancy were associated with adult height, sitting height, leg length and the sitting height ratio. Retrospective questionnaires on displacement and resettlement experiences and anthropometric data were collected from a sample of Laotian adult refugees (ethnic Hmong and Lao; n = 365). All were born in Laos or Thailand and had resettled in French Guiana or the US. Many had been displaced several times by military conflict in Laos. In bivariate analyses, being displaced in infancy and the number of lifetime displacement experiences one had were negatively associated with final adult height and leg length in both sexes. The association was stronger in females, particularly Hmong females. There was no significant association between total displacement experiences and the sitting height ratio. In multiple regression analyses, linear growth in males was negatively associated with being displaced in infancy; in females, the number of lifetime displacement experiences was a significant predictor. Forced displacement from war appears to have a lasting effect on final adult height, sitting height and leg length, although not necessarily on the sitting height ratio in this sample.

The estrogen receptor antagonist ICI 182,780 can act both as an agonist and an inverse agonist when estrogen receptor α AF-2 is modified

PubMed Central

Movérare-Skrtic, Sofia; Börjesson, Anna E.; Farman, Helen H.; Sjögren, Klara; Windahl, Sara H.; Lagerquist, Marie K.; Andersson, Annica; Stubelius, Alexandra; Carlsten, Hans; Gustafsson, Jan-Åke; Ohlsson, Claes

2014-01-01

The bone-sparing effect of estrogen is primarily mediated via estrogen receptor (ER) α, which stimulates target gene transcription through two activation functions (AFs), AF-1 in the N-terminal and AF-2 in the ligand-binding domain. It was recently demonstrated that the ER antagonist ICI 182,780 (ICI) acts as an ER agonist in uterus of mice with mutations in the ERα AF-2. To evaluate the estrogen-like effects of ICI in different tissues, ovariectomized wild-type mice and mice with mutations in the ERα AF-2 (ERαAF-20) were treated with ICI, estradiol, or vehicle for 3 wk. Estradiol increased the trabecular and cortical bone mass as well as the uterine weight, whereas it reduced fat mass, thymus weight, and the growth plate height in wild-type but not in ERαAF-20 mice. Although ICI had no effect in wild-type mice, it exerted tissue-specific effects in ERαAF-20 mice. It acted as an ERα agonist on trabecular bone mass and uterine weight, whereas no effect was seen on cortical bone mass, fat mass, or thymus weight. Surprisingly, a pronounced inverse agonistic activity was seen on the growth plate height, resulting in enhanced longitudinal bone growth. In conclusion, ICI uses ERα AF-1 in a tissue-dependent manner in mice lacking ERαAF-2, resulting in no effect, agonistic activity, or inverse agonistic activity. We propose that ERα lacking AF-2 is constitutively active in the absence of ligand in the growth plate, enabling ICI to act as an inverse agonist. PMID:24395795

The estrogen receptor antagonist ICI 182,780 can act both as an agonist and an inverse agonist when estrogen receptor α AF-2 is modified.

PubMed

Movérare-Skrtic, Sofia; Börjesson, Anna E; Farman, Helen H; Sjögren, Klara; Windahl, Sara H; Lagerquist, Marie K; Andersson, Annica; Stubelius, Alexandra; Carlsten, Hans; Gustafsson, Jan-Åke; Ohlsson, Claes

2014-01-21

The bone-sparing effect of estrogen is primarily mediated via estrogen receptor (ER) α, which stimulates target gene transcription through two activation functions (AFs), AF-1 in the N-terminal and AF-2 in the ligand-binding domain. It was recently demonstrated that the ER antagonist ICI 182,780 (ICI) acts as an ER agonist in uterus of mice with mutations in the ERα AF-2. To evaluate the estrogen-like effects of ICI in different tissues, ovariectomized wild-type mice and mice with mutations in the ERα AF-2 (ERαAF-2(0)) were treated with ICI, estradiol, or vehicle for 3 wk. Estradiol increased the trabecular and cortical bone mass as well as the uterine weight, whereas it reduced fat mass, thymus weight, and the growth plate height in wild-type but not in ERαAF-2(0) mice. Although ICI had no effect in wild-type mice, it exerted tissue-specific effects in ERαAF-2(0) mice. It acted as an ERα agonist on trabecular bone mass and uterine weight, whereas no effect was seen on cortical bone mass, fat mass, or thymus weight. Surprisingly, a pronounced inverse agonistic activity was seen on the growth plate height, resulting in enhanced longitudinal bone growth. In conclusion, ICI uses ERα AF-1 in a tissue-dependent manner in mice lacking ERαAF-2, resulting in no effect, agonistic activity, or inverse agonistic activity. We propose that ERα lacking AF-2 is constitutively active in the absence of ligand in the growth plate, enabling ICI to act as an inverse agonist.

Mitigating shear lag in tall buildings

NASA Astrophysics Data System (ADS)

Gaur, Himanshu; Goliya, Ravindra K.

2015-09-01

As the height of building increases, effect of shear lag also becomes considerable in the design of high-rise buildings. In this paper, shear lag effect in tall buildings of heights, i.e., 120, 96, 72, 48 and 36 stories of which aspect ratio ranges from 3 to 10 is studied. Tube-in-tube structural system with façade bracing is used for designing the building of height 120 story. It is found that bracing system considerably reduces the shear lag effect and hence increases the building stiffness to withstand lateral loads. Different geometric patterns of bracing system are considered. The best effective geometric configuration of bracing system is concluded in this study. Lateral force, as wind load is applied on the buildings as it is the most dominating lateral force for such heights. Wind load is set as per Indian standard code of practice IS 875 Part-3. For analysis purpose SAP 2000 software program is used.

Changes in pitch height elicit both language universal and language dependent changes in neural representation of pitch in the brainstem and auditory cortex

PubMed Central

Krishnan, Ananthanarayan; Suresh, Chandan H.; Gandour, Jackson T.

2017-01-01

Language experience shapes encoding of pitch-relevant information at both brainstem and cortical levels of processing. Pitch height is a salient dimension that orders pitch from low to high. Herein we investigate the effects of language experience (Chinese, English) in the brainstem and cortex on i) neural responses to variations in pitch height, ii) presence of asymmetry in cortical pitch representation, and iii) patterns of relative changes in magnitude of pitch height between these two levels of brain structure. Stimuli were three nonspeech homologs of Mandarin Tone 2 varying in pitch height only. The frequency-following response (FFR) and the cortical pitch-specific response (CPR) were recorded concurrently. At the Fz-linked T7/T8 site, peak latency of Na, Pb, and Nb decreased with increasing pitch height for both groups. Peak-to-peak amplitude of Na–Pb and Pb–Nb increased with increasing pitch height across groups. A language-dependent effect was restricted to Na-Pb; the Chinese had larger amplitude than the English group. At temporal sites (T7/T8), the Chinese group had larger amplitude, as compared to English, across stimuli, but also limited to the Na-Pb component and right temporal site. In the brainstem, F0 magnitude decreased with increasing pitch height; Chinese had larger magnitude across stimuli. A comparison of CPR and FFR responses revealed distinct patterns of relative changes in magnitude common to both groups. CPR amplitude increased and FFR amplitude decreased with increasing pitch height. Experience-dependent effects on CPR components vary as a function of neural sensitivity to pitch height within a particular temporal window (Na–Pb). Differences between the auditory brainstem and cortex imply distinct neural mechanisms for pitch extraction at both levels of brain structure. PMID:28108254

Changes in pitch height elicit both language-universal and language-dependent changes in neural representation of pitch in the brainstem and auditory cortex.

PubMed

Krishnan, Ananthanarayan; Suresh, Chandan H; Gandour, Jackson T

2017-03-27

Language experience shapes encoding of pitch-relevant information at both brainstem and cortical levels of processing. Pitch height is a salient dimension that orders pitch from low to high. Herein we investigate the effects of language experience (Chinese, English) in the brainstem and cortex on (i) neural responses to variations in pitch height, (ii) presence of asymmetry in cortical pitch representation, and (iii) patterns of relative changes in magnitude of pitch height between these two levels of brain structure. Stimuli were three nonspeech homologs of Mandarin Tone 2 varying in pitch height only. The frequency-following response (FFR) and the cortical pitch-specific response (CPR) were recorded concurrently. At the Fz-linked T7/T8 site, peak latency of Na, Pb, and Nb decreased with increasing pitch height for both groups. Peak-to-peak amplitude of Na-Pb and Pb-Nb increased with increasing pitch height across groups. A language-dependent effect was restricted to Na-Pb; the Chinese had larger amplitude than the English group. At temporal sites (T7/T8), the Chinese group had larger amplitude, as compared to English, across stimuli, but also limited to the Na-Pb component and right temporal site. In the brainstem, F0 magnitude decreased with increasing pitch height; Chinese had larger magnitude across stimuli. A comparison of CPR and FFR responses revealed distinct patterns of relative changes in magnitude common to both groups. CPR amplitude increased and FFR amplitude decreased with increasing pitch height. Experience-dependent effects on CPR components vary as a function of neural sensitivity to pitch height within a particular temporal window (Na-Pb). Differences between the auditory brainstem and cortex imply distinct neural mechanisms for pitch extraction at both levels of brain structure. Copyright © 2017 IBRO. Published by Elsevier Ltd. All rights reserved.

Mesh size selectivity of the gillnet in East China Sea

NASA Astrophysics Data System (ADS)

Li, L. Z.; Tang, J. H.; Xiong, Y.; Huang, H. L.; Wu, L.; Shi, J. J.; Gao, Y. S.; Wu, F. Q.

2017-07-01

A production test using several gillnets with various mesh sizes was carried out to discover the selectivity of gillnets in the East China Sea. The result showed that the composition of the catch species was synthetically affected by panel height and mesh size. The bycatch species of the 10-m nets were more than those of the 6-m nets. For target species, the effect of panel height on juvenile fish was ambiguous, but the number of juvenile fish declined quickly with the increase in mesh size. According to model deviance (D) and Akaike’s information criterion, the bi-normal model provided the best fit for small yellow croaker (Larimichthy polyactis), and the relative retention was 0.2 and 1, respectively. For Chelidonichthys spinosus, the log-normal was the best model; the right tilt of the selectivity curve was obvious and well coincided with the original data. The contact population of small yellow croaker showed a bi-normal distribution, and body lengths ranged from 95 to 215 mm. The contact population of C. spinosus showed a normal distribution, and the body lengths ranged from 95 to 205 mm. These results can provide references for coastal fishery management.

Food insecurity and linear growth of adolescents in Jimma Zone, Southwest Ethiopia.

PubMed

Belachew, Tefera; Lindstrom, David; Hadley, Craig; Gebremariam, Abebe; Kasahun, Wondwosen; Kolsteren, Patrick

2013-05-02

Although many studies showed that adolescent food insecurity is a pervasive phenomenon in Southwest Ethiopia, its effect on the linear growth of adolescents has not been documented so far. This study therefore aimed to longitudinally examine the association between food insecurity and linear growth among adolescents. Data for this study were obtained from a longitudinal survey of adolescents conducted in Jimma Zone, which followed an initial sample of 2084 randomly selected adolescents aged 13-17 years. We used linear mixed effects model for 1431 adolescents who were interviewed in three survey rounds one year apart to compare the effect of food insecurity on linear growth of adolescents. Overall, 15.9% of the girls and 12.2% of the boys (P=0.018) were food insecure both at baseline and on the year 1 survey, while 5.5% of the girls and 4.4% of the boys (P=0.331) were food insecure in all the three rounds of the survey. In general, a significantly higher proportion of girls (40%) experienced food insecurity at least in one of the survey rounds compared with boys (36.6%) (P=0.045).The trend of food insecurity showed a very sharp increase over the follow period from the baseline 20.5% to 48.4% on the year 1 survey, which again came down to 27.1% during the year 2 survey.In the linear mixed effects model, after adjusting for other covariates, the mean height of food insecure girls was shorter by 0.87 cm (P<0.001) compared with food secure girls at baseline. However, during the follow up period on average, the heights of food insecure girls increased by 0.38 cm more per year compared with food secure girls (P<0.066). However, the mean height of food insecure boys was not significantly different from food secure boys both at baseline and over the follow up period. Over the follow-up period, adolescents who live in rural and semi-urban areas grew significantly more per year than those who live in the urban areas both for girls (P<0.01) and for boys (P<0.01). Food insecurity is negatively associated with the linear growth of adolescents, especially on girls. High rate of childhood stunting in Ethiopia compounded with lower height of food insecure adolescents compared with their food secure peers calls for the development of direct nutrition interventions targeting adolescents to promote catch-up growth and break the intergenerational cycle of malnutrition.

A new radio propagation model at 2.4 GHz for wireless medical body sensors in outdoor environment.

PubMed

Yang, Daniel S

2013-01-01

This study investigates the effect of antenna height, receive antenna placement on human body, and distance between transmitter and receiver on the loss of wireless signal power in order to develop a wireless propagation model for wireless body sensors. Although many studies looked at the effect of distance, few studies were found that investigated methodically the effect of antenna height and antenna placement on the human body. Transmit antenna heights of 1, 2, and 3 meters, receive antenna heights of 1 and 1.65 meters, "on-body" and "off-body" placements of receive antenna, and a total of 11 distances ranging from 1 to 45 meters are tested in relation to received power in dBm. Multiple regression is used to analyze the data. Significance of a variable is tested by comparing its p-value with alpha, and model fit is assessed using adjusted R(2) and s of residuals. It is found that an increase in antenna height would increase power--but only for transmit antenna. The receive antenna height has a surprising, opposite effect in the on-body case and an insignificant effect in the off-body case. To formalize the propagation model, coefficient values from multiple regression are incorporated in an extension of the log-distance model to produce a new empirical model for on-body and off-body cases, and the new empirical model could conceivably be utilized to design more reliable wireless links for medical body sensors.

Wind tunnel test of model target thrust reversers for the Pratt and Whitney aircraft JT8D-100 series engines installed on a 727-200 airplane

NASA Technical Reports Server (NTRS)

Hambly, D.

1974-01-01

The results of a low speed wind tunnel test of 0.046 scale model target thrust reversers installed on a 727-200 model airplane are presented. The full airplane model was mounted on a force balance, except for the nacelles and thrust reversers, which were independently mounted and isolated from it. The installation had the capability of simulating the inlet airflows and of supplying the correct proportions of primary and secondary air to the nozzles. The objectives of the test were to assess the compatibility of the thrust reversers target door design with the engine and airplane. The following measurements were made: hot gas ingestion at the nacelle inlets; model lift, drag, and pitching moment; hot gas impingement on the airplane structure; and qualitative assessment of the rudder effectiveness. The major parameters controlling hot gas ingestion were found to be thrust reverser orientation, engine power setting, and the lip height of the bottom thrust reverser doors on the side nacelles. The thrust reversers tended to increase the model lift, decrease the drag, and decrease the pitching moment.

Size matters: Perceived depth magnitude varies with stimulus height.

PubMed

Tsirlin, Inna; Wilcox, Laurie M; Allison, Robert S

2016-06-01

Both the upper and lower disparity limits for stereopsis vary with the size of the targets. Recently, Tsirlin, Wilcox, and Allison (2012) suggested that perceived depth magnitude from stereopsis might also depend on the vertical extent of a stimulus. To test this hypothesis we compared apparent depth in small discs to depth in long bars with equivalent width and disparity. We used three estimation techniques: a virtual ruler, a touch-sensor (for haptic estimates) and a disparity probe. We found that depth estimates were significantly larger for the bar stimuli than for the disc stimuli for all methods of estimation and different configurations. In a second experiment, we measured perceived depth as a function of the height of the bar and the radius of the disc. Perceived depth increased with increasing bar height and disc radius suggesting that disparity is integrated along the vertical edges. We discuss size-disparity correlation and inter-neural excitatory connections as potential mechanisms that could account for these results. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effect of pillow height on the biomechanics of the head-neck complex: investigation of the cranio-cervical pressure and cervical spine alignment

PubMed Central

Yang, Hui; Zhou, Yan; Lin, Jin

2016-01-01

Background While appropriate pillow height is crucial to maintaining the quality of sleep and overall health, there are no universal, evidence-based guidelines for pillow design or selection. We aimed to evaluate the effect of pillow height on cranio-cervical pressure and cervical spine alignment. Methods Ten healthy subjects (five males) aged 26 ± 3.6 years were recruited. The average height, weight, and neck length were 167 ± 9.3 cm, 59.6 ± 11.9 kg, and 12.9 ± 1.2 cm respectively. The subjects lay on pillows of four different heights (H0, 110 mm; H1, 130 mm; H2, 150 mm; and H3, 170 mm). The cranio-cervical pressure distribution over the pillow was recorded; the peak and average pressures for each pillow height were compared by one-way ANOVA with repeated measures. Cervical spine alignment was studied using a finite element model constructed based on data from the Visible Human Project. The coordinate of the center of each cervical vertebra were predicted for each pillow height. Three spine alignment parameters (cervical angle, lordosis distance and kyphosis distance) were identified. Results The average cranial pressure at pillow height H3 was approximately 30% higher than that at H0, and significantly different from those at H1 and H2 (p < 0.05). The average cervical pressure at pillow height H0 was 65% lower than that at H3, and significantly different from those at H1 and H2 (p < 0.05). The peak cervical pressures at pillow heights H2 and H3 were significantly different from that at H0 (p < 0.05). With respect to cervical spine alignment, raising pillow height from H0 to H3 caused an increase of 66.4% and 25.1% in cervical angle and lordosis distance, respectively, and a reduction of 43.4% in kyphosis distance. Discussion Pillow height elevation significantly increased the average and peak pressures of the cranial and cervical regions, and increased the extension and lordosis of the cervical spine. The cranio-cervical pressures and cervical spine alignment were height-specific, and they were believed to reflect quality of sleep. Our results provide a quantitative and objective evaluation of the effect of pillow height on the biomechanics of the head-neck complex, and have application in pillow design and selection. PMID:27635354

The treatment of parental height as a biological factor in studies of birth weight and childhood growth

PubMed Central

Spencer, N; Logan, S

2002-01-01

Parental height is frequently treated as a biological variable in studies of birth weight and childhood growth. Elimination of social variables from multivariate models including parental height as a biological variable leads researchers to conclude that social factors have no independent effect on the outcome. This paper challenges the treatment of parental height as a biological variable, drawing on extensive evidence for the determination of adult height through a complex interaction of genetic and social factors. The paper firstly seeks to establish the importance of social factors in the determination of height. The methodological problems associated with treatment of parental height as a purely biological variable are then discussed, illustrated by data from published studies and by analysis of data from the 1958 National Childhood Development Study (NCDS). The paper concludes that a framework for studying pathways to pregnancy and childhood outcomes needs to take account of the complexity of the relation between genetic and social factors and be able to account for the effects of multiple risk factors acting cumulatively across time and across generations. Illustrations of these approaches are given using NCDS data. PMID:12193422

Effect of nutritional support in children with spastic quadriplegia.

PubMed

Soylu, Ozlem Bekem; Unalp, Aycan; Uran, Nedret; Dizdarer, Gülsen; Ozgonul, Figen Oksel; Conku, Aliye; Ataman, Hamide; Ozturk, Aysel Aydogan

2008-11-01

Malnutrition is a common problem in patients with cerebral palsy. We evaluated the effect of nutritional support on clinical findings in children with spastic quadriplegia. Feeding history, numbers of lower respiratory tract infections, and gastrointestinal and neurologic findings were evaluated via questionnaire. Weight, height, head circumference, midarm circumference, and triceps skinfold thickness were measured. Height for age, weight for age, weight for height, body mass index, and weight and height z-scores were calculated. Clinical findings and anthropometric parameters were re-evaluated after nutritional support for 6 months. Forty-five patients were enrolled. No difference was evident between the first and the last height z-scores of 31 patients who completed the follow-up. Weight, height, weight z-scores, weight for age, weight for height, body mass index, midarm circumference, and triceps skinfold thickness exhibited improvement. Moreover, a significant decrease in number of infections was evident. Frequency of seizures and Gross Motor Function Classification System status did not change. Constipation decreased significantly. Nutritional therapy revealed improvements in some anthropometric findings and a decrease in number of infections. Although there was no difference regarding motor development or seizure frequency, further studies with a longer follow-up are required.

Psychostimulants: Influence on Body Mass Index and Height in a Pediatric Population with Attention-Deficit/Hyperactivity Disorder?

PubMed

Lentferink, Yvette E; van de Garde, Ewoudt M W; Knibbe, Catherijne A J; van der Vorst, Marja M J

2018-05-16

Attention-deficit/hyperactivity disorder (ADHD) is often treated with psychostimulants. Psychostimulants' adverse effects on body mass index standard deviation score (BMI-sds) and height in children/adolescents with ADHD have been reported. However, literature is inconsistent, and it is unclear whether the observed effects are dosage- and/or BMI-dependent. Therefore, the aim of this retrospective observational study is to evaluate the influence of psychostimulants on BMI-sds and height-sds in a pediatric cohort with ADHD from an outpatient clinic, and to study the correlation between psychostimulant dosage and BMI-sds and height-sds change. Participants ≤18 years of age diagnosed with ADHD who started with psychostimulants (methylphenidate) were studied. Changes in BMI-sds and height-sds over an 18-month treatment period were assessed in subgroups according to baseline BMI-sds, gender, and age. Furthermore, correlations between BMI-sds, height-sds, and psychostimulant dose were studied. In total, 298 participants [median age 9.8 years, height-sds 0.0, BMI-sds 0.5, psychostimulant dosage 0.5 (0.2-1.4) mg/kg/day] were analyzed, with an underweight, overweight, and obesity prevalence of 5%, 21%, and 7%, respectively. After 18 months of treatment a significant decline in BMI-sds (-0.4) and height-sds (-0.2) was observed. These effects were consistent in all subgroups except for no change in BMI-sds in the underweight subgroup and no change in height-sds in the overweight subgroup. Medication dosage was weakly correlated with change in BMI-sds [r = -0.3 (-0.9 to +0.5); p < 0.01] and height-sds [r = -0.2 (-0.4 to -0.1); p = 0.01]. After 18 months of psychostimulant treatment, a significant decline in BMI-sds and height-sds was observed. However, the correlation with psychostimulant dosage was weak, and the decline was not observed in all subgroups. Therefore, further studies on the etiology of BMI-change are warranted, particularly with regard to the ADHD symptoms.

The Accuracy of Tank Main Armaments.

DTIC Science & Technology

1987-04-07

width (m) 1.4,3.2 hull height, width (m) 0.5,1.0043,1.1233,0.357,0.0, rr,o’ffrP&PY The program produces the following hit probabilities: a) Phit -0.52 for...hull defllade b) Phit =0.74 for ully exposed c) Phit -0.94 for the standard NATO target. The calculation of subsequent round hit probabilities is a more...hit probabilities: a) Phit =0.66 for hull defilade b) Phit =0.86 for fully exposed c) Phit =0.98 for the standard NATO target. Moving Firer Versus

Measurement and validation of benchmark-quality thick-target tungsten X-ray spectra below 150 kVp.

PubMed

Mercier, J R; Kopp, D T; McDavid, W D; Dove, S B; Lancaster, J L; Tucker, D M

2000-11-01

Pulse-height distributions of two constant potential X-ray tubes with fixed anode tungsten targets were measured and unfolded. The measurements employed quantitative alignment of the beam, the use of two different semiconductor detectors (high-purity germanium and cadmium-zinc-telluride), two different ion chamber systems with beam-specific calibration factors, and various filter and tube potential combinations. Monte Carlo response matrices were generated for each detector for unfolding the pulse-height distributions into spectra incident on the detectors. These response matrices were validated for the low error bars assigned to the data. A significant aspect of the validation of spectra, and a detailed characterization of the X-ray tubes, involved measuring filtered and unfiltered beams at multiple tube potentials (30-150 kVp). Full corrections to ion chamber readings were employed to convert normalized fluence spectra into absolute fluence spectra. The characterization of fixed anode pitting and its dominance over exit window plating and/or detector dead layer was determined. An Appendix of tabulated benchmark spectra with assigned error ranges was developed for future reference.

47 CFR 90.279 - Power limitations applicable to the 421-430 MHz band.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the 421-430 MHz band will be subject to Effective Radiated Power (ERP) and Effective Antenna Height (EAH) limitations as shown in the table below. ERP is defined as the product of the power supplied to... height above mean sea level. Limits of Effective Radiated Power (ERP) Corresponding to Effective Antenna...

The genetic overlap between schizophrenia and height.

PubMed

Bacanu, Silviu-Alin; Chen, Xianging; Kendler, Kenneth S

2013-12-01

Epidemiological studies suggest that height and schizophrenia risk are inversely correlated. These findings might arise because i) height and schizophrenia share genetic variants and ii) the effects of these shared variants are in opposite direction for the two traits. We use genome wide association data to empirically evaluate these hypotheses. We find that variants which impact on height and risk for schizophrenia are distributed across several genomic regions and the directions of effect vary, some consistent and others inconsistent with the direction expected from the phenotypic data. Moreover, signals that were in and not in accord with the phenotypic data aggregated in distinct biological pathways. © 2013 Elsevier B.V. All rights reserved.

17 Years of Cloud Heights from Terra, and Beyond

NASA Astrophysics Data System (ADS)

Davies, R.

2017-12-01

The effective cloud height, H, is the integral of observed cloud-top heights, weighted by their frequency of occurrence. Here we look at changes in the effective cloud height, H', as measured by the Multiangle Imaging Spectroradiometer (MISR) on the first Earth Observing System platform, Terra. Terra was launched in December 1999, and now has over 17 years of consistently measured climate records. Globally, HG' has an important influence on Earth's climate, whereas regionally, HR' is a useful measure of low frequency changes in circulation patterns. MISR has a sampling error in the annual mean HG' of ≈11 m, allowing fairly small interannual variations to be detected. This paper extends the previous 15-year summary that showed significant differences in the long term mean hemispheric cloud height changes. Also of interest are the correlations in tropical cloud height changes and related teleconnections. The largest ephemeral values in the annual HR' [over 1.5 km] are noted over the Central Pacific and the Maritime Continent. These changes are strongly anticorrelated with each other, being directly related to changes in ENSO. They are also correlated with the largest ephemeral changes in HG'. Around the equator, we find at least four distinct centres of similar fluctuations in cloud height. This paper examines the relative time dependence of these regional height changes, separately for La Niña and El Niño events, and stresses the value of extending the time series of uniformly measured cloud heights from space beyond EOS-Terra.

Socioeconomic development and secular trend in height in China.

PubMed

Zong, Xin-Nan; Li, Hui; Wu, Hua-Hong; Zhang, Ya-Qin

2015-12-01

The objective of this study was to examine the effect of socioeconomic development on secular trend in height among children and adolescents in China. Body height and spermarcheal/menarcheal ages were obtained from two periodic large-scale national representative surveys in China between 1975 and 2010. Chinese socioeconomic development indicators were obtained from the United Nations world population prospects. The effects of plausible determinants were assessed by partial least-squares regression. The average height of children and adolescents improved in tandem with socioeconomic development, without any tendency to plateau. The increment of height trend presented larger around puberty than earlier or later ages. The partial least-squares regressions with gross national income, life expectancy and spermarcheal/menarcheal age accounted for increment of height trend from 88.3% to 98.3% for males and from 82.9% to 97.3% for females in adolescence. Further, through the analysis of the variable importance for projection, the contributions of gross national income and life expectancy on height increment were confirmed to be significant in childhood and adolescence, and the contribution of spermarcheal/menarcheal age was superior to both of them in adolescence. We concluded that positive secular trend in height in China was significantly associated with socioeconomic status (GNI as indicator) and medical and health conditions (life expectancy as indicator). Earlier onset of spermarche and menarche proved to be an important role in larger increment of the trend over time of height at puberty for a population. Copyright © 2015 Elsevier B.V. All rights reserved.

Acoustic mirror effect increases prey detection distance in trawling bats

NASA Astrophysics Data System (ADS)

Siemers, Björn M.; Baur, Eric; Schnitzler, Hans-Ulrich

2005-06-01

Many different and phylogenetically distant species of bats forage for insects above water bodies and take insects from and close to the surface; the so-called ‘trawling behaviour’. Detection of surface-based prey by echolocation is facilitated by acoustically smooth backgrounds such as water surfaces that reflect sound impinging at an acute angle away from the bat and thereby render a prey object acoustically conspicuous. Previous measurements had shown that the echo amplitude of a target on a smooth surface is higher than that of the same target in mid-air, due to an acoustic mirror effect. In behavioural experiments with three pond bats (Myotis dasycneme), we tested the hypothesis that the maximum distances at which bats can detect prey are larger for prey on smooth surfaces than for the same prey in an airborne situation. We determined the moment of prey detection from a change in echolocation behaviour and measured the detection distance in 3D space from IR-video recordings using stereo-photogrammetry. The bats showed the predicted increase in detection distance for prey on smooth surfaces. The acoustic mirror effect therefore increases search efficiency and contributes to the acoustic advantages encountered by echolocating bats when foraging at low heights above smooth water surfaces. These acoustic advantages may have favoured the repeated evolution of trawling behaviour.

Acoustic mirror effect increases prey detection distance in trawling bats.

PubMed

Siemers, Björn M; Baur, Eric; Schnitzler, Hans-Ulrich

2005-06-01

Many different and phylogenetically distant species of bats forage for insects above water bodies and take insects from and close to the surface; the so-called 'trawling behaviour'. Detection of surface-based prey by echolocation is facilitated by acoustically smooth backgrounds such as water surfaces that reflect sound impinging at an acute angle away from the bat and thereby render a prey object acoustically conspicuous. Previous measurements had shown that the echo amplitude of a target on a smooth surface is higher than that of the same target in mid-air, due to an acoustic mirror effect. In behavioural experiments with three pond bats (Myotis dasycneme), we tested the hypothesis that the maximum distances at which bats can detect prey are larger for prey on smooth surfaces than for the same prey in an airborne situation. We determined the moment of prey detection from a change in echolocation behaviour and measured the detection distance in 3D space from IR-video recordings using stereo-photogrammetry. The bats showed the predicted increase in detection distance for prey on smooth surfaces. The acoustic mirror effect therefore increases search efficiency and contributes to the acoustic advantages encountered by echolocating bats when foraging at low heights above smooth water surfaces. These acoustic advantages may have favoured the repeated evolution of trawling behaviour.

Relative effects of posture and activity on human height estimation from surveillance footage.

PubMed

Ramstrand, Nerrolyn; Ramstrand, Simon; Brolund, Per; Norell, Kristin; Bergström, Peter

2011-10-10

Height estimations based on security camera footage are often requested by law enforcement authorities. While valid and reliable techniques have been established to determine vertical distances from video frames, there is a discrepancy between a person's true static height and their height as measured when assuming different postures or when in motion (e.g., walking). The aim of the research presented in this report was to accurately record the height of subjects as they performed a variety of activities typically observed in security camera footage and compare results to height recorded using a standard height measuring device. Forty-six able bodied adults participated in this study and were recorded using a 3D motion analysis system while performing eight different tasks. Height measurements captured using the 3D motion analysis system were compared to static height measurements in order to determine relative differences. It is anticipated that results presented in this report can be used by forensic image analysis experts as a basis for correcting height estimations of people captured on surveillance footage. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Does plyometric training improve vertical jump height? A meta-analytical review.

PubMed

Markovic, Goran

2007-06-01

The aim of this study was to determine the precise effect of plyometric training (PT) on vertical jump height in healthy individuals. Meta-analyses of randomised and non-randomised controlled trials that evaluated the effect of PT on four typical vertical jump height tests were carried out: squat jump (SJ); countermovement jump (CMJ); countermovement jump with the arm swing (CMJA); and drop jump (DJ). Studies were identified by computerised and manual searches of the literature. Data on changes in jump height for the plyometric and control groups were extracted and statistically pooled in a meta-analysis, separately for each type of jump. A total of 26 studies yielding 13 data points for SJ, 19 data points for CMJ, 14 data points for CMJA and 7 data points for DJ met the initial inclusion criteria. The pooled estimate of the effect of PT on vertical jump height was 4.7% (95% CI 1.8 to 7.6%), 8.7% (95% CI 7.0 to 10.4%), 7.5% (95% CI 4.2 to 10.8%) and 4.7% (95% CI 0.8 to 8.6%) for the SJ, CMJ, CMJA and DJ, respectively. When expressed in standardised units (ie, effect sizes), the effect of PT on vertical jump height was 0.44 (95% CI 0.15 to 0.72), 0.88 (95% CI 0.64 to 1.11), 0.74 (95% CI 0.47 to 1.02) and 0.62 (95% CI 0.18 to 1.05) for the SJ, CMJ, CMJA and DJ, respectively. PT provides a statistically significant and practically relevant improvement in vertical jump height with the mean effect ranging from 4.7% (SJ and DJ), over 7.5% (CMJA) to 8.7% (CMJ). These results justify the application of PT for the purpose of development of vertical jump performance in healthy individuals.

Maternal care mediates the effects of nutrition and responsive stimulation interventions on young children's growth.

PubMed

Brown, N; Finch, J E; Obradović, J; Yousafzai, A K

2017-07-01

Undernutrition contributes to at least half the estimated six million annual childhood deaths worldwide. Furthermore, one in three children fails to meet their developmental potential because of risks including stunting, illness, under-stimulation, poor responsive interactions and maternal depressive symptoms. Our study investigates the role of caregiving processes on children's height-for-age at 2 and 4 years. The Pakistan Early Child Development Scale-up study assessed the longitudinal effectiveness of early nutrition and responsive stimulation interventions on growth and development at 4 years of age. In total, 1302 children were followed up from birth to 4 years. We leveraged path analyses to explore potential mediators of early intervention effects on children's height-for-age at 4 years, including maternal depressive symptoms, mother-child interaction quality, diarrhoeal illness and height-for-age at 2 years. Our final model had excellent model fit (comparative fix index = 0.999, Tucker-Lewis index = 0.998, root mean square error of approximation = 0.008) and showed that mother-child interaction quality mediated the effects of both enhanced nutrition and responsive stimulation interventions on height-for-age at 4 years via its longitudinal stability from 2 years of age (β = 0.016, p = 0.005; β = 0.048, p < 0.001, respectively). Further, diarrhoeal illness mediated the effects of maternal depressive symptoms at 1 year post partum on children's height-for-age at 4 years via the longitudinal stability of height-for-age z-score from 2 years of age onwards (β = -0.007, p = 0.019). The quality of early caregiving experience mediated the association between both interventions and height-for-age. The effect of maternal depressive symptoms on growth was mediated by diarrhoeal illness. Programmatic approaches to child nutrition and growth must address all these potentially modifiable factors. © 2017 John Wiley & Sons Ltd.

Monitoring culvert load with shallow filling under Geofoam areas.

DOT National Transportation Integrated Search

2008-08-01

Geofoam and the "Imperfect Ditch" method can be used effectively on embankment projects to reduce pressures on underground structures when sufficient fill height is available to create an arching effect. When the fill height is too shallow the archin...

Primary and secondary pesticide drift profiles from a peach orchard.

PubMed

Zivan, Ohad; Bohbot-Raviv, Yardena; Dubowski, Yael

2017-06-01

Atmospheric drift is considered a major loss path of pesticide from target areas, but there is still a large gap of knowledge regarding this complex phenomenon. Pesticide drift may occur during application (Primary drift) and after it (Secondary drift). The present study focuses on primary and secondary drift from ground applications in peach orchard (tree height of 3 m), under Mediterranean climate. Detailed and prolonged vertical drift profiles at close proximity to orchard are presented, together with detailed measurements of key meteorological parameters. The effect of volatility on drift was also studied by simultaneously applying two pesticides that differ in their volatility. Drifting airborne pesticides were detected both during and after applications at sampling distances of 7 and 20 m away from orchard edge. Concentrations ranged between hundreds ng m -3 to a few μg m -3 and showed clear decrease with time and with upwind conditions. Almost no decline in concentrations with height was observed up to thrice canopy height (i.e., 10 m). These homogeneous profiles indicate strong mixing near orchard and are in line with the unstable atmospheric conditions that prevailed during measurements. While air concentrations during pesticide application were higher than after it, overall pesticide load drifted from the orchard during primary and secondary drift are comparable. To the best of our knowledge this is the first work to show such large vertical dispersion and long duration of secondary drift following ground application in orchards. The obtained information indicates that secondary drift should not be neglected in exposure and environmental impact estimations. Copyright © 2017 Elsevier Ltd. All rights reserved.

Prediction of anthropometric foot characteristics in children.

PubMed

Morrison, Stewart C; Durward, Brian R; Watt, Gordon F; Donaldson, Malcolm D C

2009-01-01

The establishment of growth reference values is needed in pediatric practice where pathologic conditions can have a detrimental effect on the growth and development of the pediatric foot. This study aims to use multiple regression to evaluate the effects of multiple predictor variables (height, age, body mass, and gender) on anthropometric characteristics of the peripubescent foot. Two hundred children aged 9 to 12 years were recruited, and three anthropometric measurements of the pediatric foot were recorded (foot length, forefoot width, and navicular height). Multiple regression analysis was conducted, and coefficients for gender, height, and body mass all had significant relationships for the prediction of forefoot width and foot length (P < or = .05, r > or = 0.7). The coefficients for gender and body mass were not significant for the prediction of navicular height (P > or = .05), whereas height was (P < or = .05). Normative growth reference values and prognostic regression equations are presented for the peripubescent foot.

"Facing humanness: Facial width-to-height ratio predicts ascriptions of humanity": Correction to Deska, Lloyd, and Hugenberg (2017).

PubMed

2018-01-01

Reports an error in "Facing Humanness: Facial Width-to-Height Ratio Predicts Ascriptions of Humanity" by Jason C. Deska, E. Paige Lloyd and Kurt Hugenberg ( Journal of Personality and Social Psychology , Advanced Online Publication, Aug 28, 2017, np). In the article, there is a data error in the Results section of Study 1c. The fourth sentence of the fourth paragraph should read as follows: High fWHR targets (M= 74.39, SD=18.25) were rated as equivalently evolved as their low fWHR counterparts (M=79.39, SD=15.91). (The following abstract of the original article appeared in record 2017-36694-001.) The ascription of mind to others is central to social cognition. Most research on the ascription of mind has focused on motivated, top-down processes. The current work provides novel evidence that facial width-to-height ratio (fWHR) serves as a bottom-up perceptual signal of humanness. Using a range of well-validated operational definitions of humanness, we provide evidence across 5 studies that target faces with relatively greater fWHR are seen as less than fully human compared with their relatively lower fWHR counterparts. We then present 2 ancillary studies exploring whether the fWHR-to-humanness link is mediated by previously established fWHR-trait links in the literature. Finally, 3 additional studies extend this fWHR-humanness link beyond measurements of humanness, demonstrating that the fWHR-humanness link has consequences for downstream social judgments including the sorts of crimes people are perceived to be guilty of and the social tasks for which they seem helpful. In short, we provide evidence for the hypothesis that individuals with relatively greater facial width-to-height ratio are routinely denied sophisticated, humanlike minds. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Impact of growth hormone therapy on adult height of children with idiopathic short stature: systematic review.

PubMed

Deodati, Annalisa; Cianfarani, Stefano

2011-03-11

To systematically determine the impact of growth hormone therapy on adult height of children with idiopathic short stature. Systematic review. Cochrane Central Register of Controlled Trials, Medline, and the bibliographic references from retrieved articles of randomised and non-randomised controlled trials from 1985 to April 2010. Height in adulthood (standard deviation score) and overall gain in height (SD score) from baseline measurement in childhood. Randomised and non-randomised controlled trials with height measurements for adults. Inclusion criteria were initial short stature (defined as height >2 SD score below the mean), peak growth hormone responses >10 μg/L, prepubertal stage, no previous growth hormone therapy, and no comorbid conditions that would impair growth. Adult height was considered achieved when growth rate was <1.5 cm/year or bone age was 15 years in females and 16 years in males. Three randomised controlled trials (115 children) met the inclusion criteria. The adult height of the growth hormone treated children exceeded that of the controls by 0.65 SD score (about 4 cm). The mean height gain in treated children was 1.2 SD score compared with 0.34 SD score in untreated children. A slight difference of about 1.2 cm in adult height was observed between the two growth hormone dose regimens. In the seven non-randomised controlled trials the adult height of the growth hormone treated group exceeded that of the controls by 0.45 SD score (about 3 cm). Growth hormone therapy in children with idiopathic short stature seems to be effective in partially reducing the deficit in height as adults, although the magnitude of effectiveness is on average less than that achieved in other conditions for which growth hormone is licensed. The individual response to therapy is highly variable, and additional studies are needed to identify the responders.

Effects of lisdexamfetamine dimesylate treatment for ADHD on growth.

PubMed

Faraone, Stephen V; Spencer, Thomas J; Kollins, Scott H; Glatt, Stephen J

2010-01-01

To complete an exploratory uncontrolled study of the effects of lisdexamfetamine dimesylate (LDX) on growth of children treated for attention-deficit/hyperactivity disorder (ADHD). Height, weight, and body mass index (BMI) from 281 children ages 6 to 13 years from longitudinal assessments up to 15 months were compared to norms from the Centers for Disease Control. At study entry, children were taller and heavier than average. Growth delays were largest for weight and BMI, and there was a 13 percentile point decrease in height. Children continued to grow in terms of height while treated with LDX; we found no increase in raw weight or BMI during the study period. LDX treatment was significantly associated with diminished gains in height, weight, and BMI compared to levels that would be expected based on age-appropriate standards from the Centers for Disease Control. Growth delays were greatest for the heaviest and tallest children, for those who had not previously received stimulant therapy, and for those with a greater cumulative exposure to LDX. More work is needed to determine effects on ultimate adult height. Consistent with prior studies of stimulants, treatment with LDX leads to statistically significant reductions in expected height, weight, and BMI. Growth of patients with ADHD treated with LDX should be closely monitored and corrective action taken should growth delays be observed.

Shallow water observations of the bottom boundary during an energetic storm

NASA Astrophysics Data System (ADS)

Sheremet, A.; Klammer, H.; Calantoni, J.

2016-12-01

We report high-resolution field observations collected at the U.S. Army Corps of Engineers, Field Research Facility, Duck, NC from 26 January - 10 March 2015. The experiment deployed two instrument arrays near the 6-m and 8-m isobaths that included acoustic Doppler current profilers, acoustic Doppler velocimeters, pressure and CTD sensors to monitor waves, currents, turbulence, temperature, conductivity and suspended sediment concentration at high temporal and vertical resolution. Additionally, munitions, or "targets", were deployed that spanned a range of sizes and densities with munitions mobility and burial monitored continuously at the 8-m array with sector scanning sonars and at the 6-m array with a pencil beam sonar. The roughly 6-week long experiment observed a sequence of at least 10 winter storm events, six of which were characterized by significant wave heights exceeding 2 m at the 8-m instrument array, with peak periods typically around 10 s. During the strongest storm from 10 - 15 February 2015, waves at the 8-m array had peak periods around 14 s and significant wave heights exceeding 2 m for more than 3 days, with significant wave heights exceeding 5 m at the peak of activity. Despite the tremendous amount of hydrodynamic activity bathymetric surveys performed on 16 January 2015 (before) and 17 March 2015 (after) the experiment showed only 5 - 10 cm variation in bed elevation at the 8-m array, suggesting that the local gradients in sediment transport were nearly negligible. Additionally, time series of tilt and heading sensors indicated periods of "jacking" of the instrument frame that was initially moored using four pipes, about 3 m in length, jetted into the seafloor, while some targets were found buried up to 60 cm deep. We will present a detailed analysis of the near-bed hydrodynamics during the most energetic storm and present a simple model to explain the observed burial depths of targets.

Active laser radar (lidar) for measurement of corresponding height and reflectance images

NASA Astrophysics Data System (ADS)

Froehlich, Christoph; Mettenleiter, M.; Haertl, F.

1997-08-01

For the survey and inspection of environmental objects, a non-tactile, robust and precise imaging of height and depth is the basis sensor technology. For visual inspection,surface classification, and documentation purposes, however, additional information concerning reflectance of measured objects is necessary. High-speed acquisition of both geometric and visual information is achieved by means of an active laser radar, supporting consistent 3D height and 2D reflectance images. The laser radar is an optical-wavelength system, and is comparable to devices built by ERIM, Odetics, and Perceptron, measuring the range between sensor and target surfaces as well as the reflectance of the target surface, which corresponds to the magnitude of the back scattered laser energy. In contrast to these range sensing devices, the laser radar under consideration is designed for high speed and precise operation in both indoor and outdoor environments, emitting a minimum of near-IR laser energy. It integrates a laser range measurement system and a mechanical deflection system for 3D environmental measurements. This paper reports on design details of the laser radar for surface inspection tasks. It outlines the performance requirements and introduces the measurement principle. The hardware design, including the main modules, such as the laser head, the high frequency unit, the laser beam deflection system, and the digital signal processing unit are discussed.the signal processing unit consists of dedicated signal processors for real-time sensor data preprocessing as well as a sensor computer for high-level image analysis and feature extraction. The paper focuses on performance data of the system, including noise, drift over time, precision, and accuracy with measurements. It discuses the influences of ambient light, surface material of the target, and ambient temperature for range accuracy and range precision. Furthermore, experimental results from inspection of buildings, monuments and industrial environments are presented. The paper concludes by summarizing results achieved in industrial environments and gives a short outlook to future work.

Height, selected genetic markers and prostate cancer risk: results from the PRACTICAL consortium.

PubMed

Lophatananon, Artitaya; Stewart-Brown, Sarah; Kote-Jarai, Zsofia; Olama, Ali Amin Al; Garcia, Sara Benlloch; Neal, David E; Hamdy, Freddie C; Donovan, Jenny L; Giles, Graham G; Fitzgerald, Liesel M; Southey, Melissa C; Pharoah, Paul; Pashayan, Nora; Gronberg, Henrik; Wiklund, Fredrik; Aly, Markus; Stanford, Janet L; Brenner, Hermann; Dieffenbach, Aida K; Arndt, Volker; Park, Jong Y; Lin, Hui-Yi; Sellers, Thomas; Slavov, Chavdar; Kaneva, Radka; Mitev, Vanio; Batra, Jyotsna; Spurdle, Amanda; Clements, Judith A; Easton, Douglas; Eeles, Rosalind A; Muir, Kenneth

2017-08-22

Evidence on height and prostate cancer risk is mixed, however, recent studies with large data sets support a possible role for its association with the risk of aggressive prostate cancer. We analysed data from the PRACTICAL consortium consisting of 6207 prostate cancer cases and 6016 controls and a subset of high grade cases (2480 cases). We explored height, polymorphisms in genes related to growth processes as main effects and their possible interactions. The results suggest that height is associated with high-grade prostate cancer risk. Men with height >180 cm are at a 22% increased risk as compared to men with height <173 cm (OR 1.22, 95% CI 1.01-1.48). Genetic variants in the growth pathway gene showed an association with prostate cancer risk. The aggregate scores of the selected variants identified a significantly increased risk of overall prostate cancer and high-grade prostate cancer by 13% and 15%, respectively, in the highest score group as compared to lowest score group. There was no evidence of gene-environment interaction between height and the selected candidate SNPs.Our findings suggest a role of height in high-grade prostate cancer. The effect of genetic variants in the genes related to growth is seen in all cases and high-grade prostate cancer. There is no interaction between these two exposures.

Effects of height on treetop transpiration and stomatal conductance in coast redwood (Sequoia sempervirens).

PubMed

Ambrose, Anthony R; Sillett, Stephen C; Koch, George W; Van Pelt, Robert; Antoine, Marie E; Dawson, Todd E

2010-10-01

Treetops become increasingly constrained by gravity-induced water stress as they approach maximum height. Here we examine the effects of height on seasonal and diurnal sap flow dynamics at the tops of 12 unsuppressed Sequoia sempervirens (D. Don) Endl. (coast redwood) trees 68-113 m tall during one growing season. Average treetop sap velocity (V(S)), transpiration per unit leaf area (E(L)) and stomatal conductance per unit leaf area (G(S)) significantly decreased with increasing height. These differences in sap flow were associated with an unexpected decrease in treetop sapwood area-to-leaf area ratios (A(S):A(L)) in the tallest trees. Both E(L) and G(S) declined as soil moisture decreased and vapor pressure deficit (D) increased throughout the growing season with a greater decline in shorter trees. Under high soil moisture and light conditions, reference G(S) (G(Sref); G(S) at D = 1 kPa) and sensitivity of G(S) to D (-δ; dG(S)/dlnD) significantly decreased with increasing height. The close relationship we observed between G(Sref) and -δ is consistent with the role of stomata in regulating E(L) and leaf water potential (Ψ(L)). Our results confirm that increasing tree height reduces gas exchange of treetop foliage and thereby contributes to lower carbon assimilation and height growth rates as S. sempervirens approaches maximum height.

Site Preparation For Intensively Cultured Hybrid Poplar Plantations

Treesearch

Edward Hansen; Daniel Netzer; W.J. Rietveld

1984-01-01

Five site preparation treatments consisting of combinations of tillage, contact herbicide (glyphosate), and pre-emergent herbicide (linuron) were tested for their effects on tree survival and growth. Treatments had little effect on tree survival, but effects on second-year-tree height were significant and additive -- i.e., tree height increased as the number of types...

Growth reference centiles and secular changes in Turkish children and adolescents.

PubMed

Ozer, Başak Koca

2007-07-01

The purpose of the study is to develop current reference growth centiles for Turkish children and adolescents. A cross-sectional growth survey was conducted on 1.427 (709 boys and 718 girls) healthy schoolchildren aged 6-17 years in Ankara, the capital city of Turkey. As an indicator of socio-economic status, the occupation of the parents was recorded. Growth references of height, weight, body mass index (BMI), sitting height, iliospinal height, relative iliospinal height and relative sitting height were constructed by the LMS method. Sex differences, association of parental occupation with height and BMI standard deviation scores were assessed by analyses of variance. Results showed significant sexual dimorphism for height, weight, sitting height and iliospinal height (p<0.001). Significant effect of socio-economic background was found on height and BMI. The prevalence of overweight and obesity was found using the International Obesity Task Force (IOTF) reference criteria 22.4% and 5.6% in boys and 21.2% and 3% in girls. Present results demonstrated an increment during the last three decades in height, leg length and weight curves which is more prominent in boys, but not in the sitting height. This positive secular change appears to be a logical outcome of the gradual changes in nutrition, health care and education, and environmental and economic conditions.

Rare and low-frequency coding variants alter human adult height

PubMed Central

Marouli, Eirini; Graff, Mariaelisa; Medina-Gomez, Carolina; Lo, Ken Sin; Wood, Andrew R; Kjaer, Troels R; Fine, Rebecca S; Lu, Yingchang; Schurmann, Claudia; Highland, Heather M; Rüeger, Sina; Thorleifsson, Gudmar; Justice, Anne E; Lamparter, David; Stirrups, Kathleen E; Turcot, Valérie; Young, Kristin L; Winkler, Thomas W; Esko, Tõnu; Karaderi, Tugce; Locke, Adam E; Masca, Nicholas GD; Ng, Maggie CY; Mudgal, Poorva; Rivas, Manuel A; Vedantam, Sailaja; Mahajan, Anubha; Guo, Xiuqing; Abecasis, Goncalo; Aben, Katja K; Adair, Linda S; Alam, Dewan S; Albrecht, Eva; Allin, Kristine H; Allison, Matthew; Amouyel, Philippe; Appel, Emil V; Arveiler, Dominique; Asselbergs, Folkert W; Auer, Paul L; Balkau, Beverley; Banas, Bernhard; Bang, Lia E; Benn, Marianne; Bergmann, Sven; Bielak, Lawrence F; Blüher, Matthias; Boeing, Heiner; Boerwinkle, Eric; Böger, Carsten A; Bonnycastle, Lori L; Bork-Jensen, Jette; Bots, Michiel L; Bottinger, Erwin P; Bowden, Donald W; Brandslund, Ivan; Breen, Gerome; Brilliant, Murray H; Broer, Linda; Burt, Amber A; Butterworth, Adam S; Carey, David J; Caulfield, Mark J; Chambers, John C; Chasman, Daniel I; Chen, Yii-Der Ida; Chowdhury, Rajiv; Christensen, Cramer; Chu, Audrey Y; Cocca, Massimiliano; Collins, Francis S; Cook, James P; Corley, Janie; Galbany, Jordi Corominas; Cox, Amanda J; Cuellar-Partida, Gabriel; Danesh, John; Davies, Gail; de Bakker, Paul IW; de Borst, Gert J.; de Denus, Simon; de Groot, Mark CH; de Mutsert, Renée; Deary, Ian J; Dedoussis, George; Demerath, Ellen W; den Hollander, Anneke I; Dennis, Joe G; Di Angelantonio, Emanuele; Drenos, Fotios; Du, Mengmeng; Dunning, Alison M; Easton, Douglas F; Ebeling, Tapani; Edwards, Todd L; Ellinor, Patrick T; Elliott, Paul; Evangelou, Evangelos; Farmaki, Aliki-Eleni; Faul, Jessica D; Feitosa, Mary F; Feng, Shuang; Ferrannini, Ele; Ferrario, Marco M; Ferrieres, Jean; Florez, Jose C; Ford, Ian; Fornage, Myriam; Franks, Paul W; Frikke-Schmidt, Ruth; Galesloot, Tessel E; Gan, Wei; Gandin, Ilaria; Gasparini, Paolo; Giedraitis, Vilmantas; Giri, Ayush; Girotto, Giorgia; Gordon, Scott D; Gordon-Larsen, Penny; Gorski, Mathias; Grarup, Niels; Grove, Megan L.; Gudnason, Vilmundur; Gustafsson, Stefan; Hansen, Torben; Harris, Kathleen Mullan; Harris, Tamara B; Hattersley, Andrew T; Hayward, Caroline; He, Liang; Heid, Iris M; Heikkilä, Kauko; Helgeland, Øyvind; Hernesniemi, Jussi; Hewitt, Alex W; Hocking, Lynne J; Hollensted, Mette; Holmen, Oddgeir L; Hovingh, G. Kees; Howson, Joanna MM; Hoyng, Carel B; Huang, Paul L; Hveem, Kristian; Ikram, M. Arfan; Ingelsson, Erik; Jackson, Anne U; Jansson, Jan-Håkan; Jarvik, Gail P; Jensen, Gorm B; Jhun, Min A; Jia, Yucheng; Jiang, Xuejuan; Johansson, Stefan; Jørgensen, Marit E; Jørgensen, Torben; Jousilahti, Pekka; Jukema, J Wouter; Kahali, Bratati; Kahn, René S; Kähönen, Mika; Kamstrup, Pia R; Kanoni, Stavroula; Kaprio, Jaakko; Karaleftheri, Maria; Kardia, Sharon LR; Karpe, Fredrik; Kee, Frank; Keeman, Renske; Kiemeney, Lambertus A; Kitajima, Hidetoshi; Kluivers, Kirsten B; Kocher, Thomas; Komulainen, Pirjo; Kontto, Jukka; Kooner, Jaspal S; Kooperberg, Charles; Kovacs, Peter; Kriebel, Jennifer; Kuivaniemi, Helena; Küry, Sébastien; Kuusisto, Johanna; La Bianca, Martina; Laakso, Markku; Lakka, Timo A; Lange, Ethan M; Lange, Leslie A; Langefeld, Carl D; Langenberg, Claudia; Larson, Eric B; Lee, I-Te; Lehtimäki, Terho; Lewis, Cora E; Li, Huaixing; Li, Jin; Li-Gao, Ruifang; Lin, Honghuang; Lin, Li-An; Lin, Xu; Lind, Lars; Lindström, Jaana; Linneberg, Allan; Liu, Yeheng; Liu, Yongmei; Lophatananon, Artitaya; Luan, Jian'an; Lubitz, Steven A; Lyytikäinen, Leo-Pekka; Mackey, David A; Madden, Pamela AF; Manning, Alisa K; Männistö, Satu; Marenne, Gaëlle; Marten, Jonathan; Martin, Nicholas G; Mazul, Angela L; Meidtner, Karina; Metspalu, Andres; Mitchell, Paul; Mohlke, Karen L; Mook-Kanamori, Dennis O; Morgan, Anna; Morris, Andrew D; Morris, Andrew P; Müller-Nurasyid, Martina; Munroe, Patricia B; Nalls, Mike A; Nauck, Matthias; Nelson, Christopher P; Neville, Matt; Nielsen, Sune F; Nikus, Kjell; Njølstad, Pål R; Nordestgaard, Børge G; Ntalla, Ioanna; O'Connel, Jeffrey R; Oksa, Heikki; Loohuis, Loes M Olde; Ophoff, Roel A; Owen, Katharine R; Packard, Chris J; Padmanabhan, Sandosh; Palmer, Colin NA; Pasterkamp, Gerard; Patel, Aniruddh P; Pattie, Alison; Pedersen, Oluf; Peissig, Peggy L; Peloso, Gina M; Pennell, Craig E; Perola, Markus; Perry, James A; Perry, John R.B.; Person, Thomas N; Pirie, Ailith; Polasek, Ozren; Posthuma, Danielle; Raitakari, Olli T; Rasheed, Asif; Rauramaa, Rainer; Reilly, Dermot F; Reiner, Alex P; Renström, Frida; Ridker, Paul M; Rioux, John D; Robertson, Neil; Robino, Antonietta; Rolandsson, Olov; Rudan, Igor; Ruth, Katherine S; Saleheen, Danish; Salomaa, Veikko; Samani, Nilesh J; Sandow, Kevin; Sapkota, Yadav; Sattar, Naveed; Schmidt, Marjanka K; Schreiner, Pamela J; Schulze, Matthias B; Scott, Robert A; Segura-Lepe, Marcelo P; Shah, Svati; Sim, Xueling; Sivapalaratnam, Suthesh; Small, Kerrin S; Smith, Albert Vernon; Smith, Jennifer A; Southam, Lorraine; Spector, Timothy D; Speliotes, Elizabeth K; Starr, John M; Steinthorsdottir, Valgerdur; Stringham, Heather M; Stumvoll, Michael; Surendran, Praveen; Hart, Leen M ‘t; Tansey, Katherine E; Tardif, Jean-Claude; Taylor, Kent D; Teumer, Alexander; Thompson, Deborah J; Thorsteinsdottir, Unnur; Thuesen, Betina H; Tönjes, Anke; Tromp, Gerard; Trompet, Stella; Tsafantakis, Emmanouil; Tuomilehto, Jaakko; Tybjaerg-Hansen, Anne; Tyrer, Jonathan P; Uher, Rudolf; Uitterlinden, André G; Ulivi, Sheila; van der Laan, Sander W; Van Der Leij, Andries R; van Duijn, Cornelia M; van Schoor, Natasja M; van Setten, Jessica; Varbo, Anette; Varga, Tibor V; Varma, Rohit; Edwards, Digna R Velez; Vermeulen, Sita H; Vestergaard, Henrik; Vitart, Veronique; Vogt, Thomas F; Vozzi, Diego; Walker, Mark; Wang, Feijie; Wang, Carol A; Wang, Shuai; Wang, Yiqin; Wareham, Nicholas J; Warren, Helen R; Wessel, Jennifer; Willems, Sara M; Wilson, James G; Witte, Daniel R; Woods, Michael O; Wu, Ying; Yaghootkar, Hanieh; Yao, Jie; Yao, Pang; Yerges-Armstrong, Laura M; Young, Robin; Zeggini, Eleftheria; Zhan, Xiaowei; Zhang, Weihua; Zhao, Jing Hua; Zhao, Wei; Zhao, Wei; Zheng, He; Zhou, Wei; Rotter, Jerome I; Boehnke, Michael; Kathiresan, Sekar; McCarthy, Mark I; Willer, Cristen J; Stefansson, Kari; Borecki, Ingrid B; Liu, Dajiang J; North, Kari E; Heard-Costa, Nancy L; Pers, Tune H; Lindgren, Cecilia M; Oxvig, Claus; Kutalik, Zoltán; Rivadeneira, Fernando; Loos, Ruth JF; Frayling, Timothy M; Hirschhorn, Joel N; Deloukas, Panos; Lettre, Guillaume

2016-01-01

Summary Height is a highly heritable, classic polygenic trait with ∼700 common associated variants identified so far through genome-wide association studies. Here, we report 83 height-associated coding variants with lower minor allele frequencies (range of 0.1-4.8%) and effects of up to 2 cm/allele (e.g. in IHH, STC2, AR and CRISPLD2), >10 times the average effect of common variants. In functional follow-up studies, rare height-increasing alleles of STC2 (+1-2 cm/allele) compromised proteolytic inhibition of PAPP-A and increased cleavage of IGFBP-4 in vitro, resulting in higher bioavailability of insulin-like growth factors. These 83 height-associated variants overlap genes mutated in monogenic growth disorders and highlight new biological candidates (e.g. ADAMTS3, IL11RA, NOX4) and pathways (e.g. proteoglycan/glycosaminoglycan synthesis) involved in growth. Our results demonstrate that sufficiently large sample sizes can uncover rare and low-frequency variants of moderate to large effect associated with polygenic human phenotypes, and that these variants implicate relevant genes and pathways. PMID:28146470

Predictive modeling of pedestal structure in KSTAR using EPED model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Han, Hyunsun; Kim, J. Y.; Kwon, Ohjin

2013-10-15

A predictive calculation is given for the structure of edge pedestal in the H-mode plasma of the KSTAR (Korea Superconducting Tokamak Advanced Research) device using the EPED model. Particularly, the dependence of pedestal width and height on various plasma parameters is studied in detail. The two codes, ELITE and HELENA, are utilized for the stability analysis of the peeling-ballooning and kinetic ballooning modes, respectively. Summarizing the main results, the pedestal slope and height have a strong dependence on plasma current, rapidly increasing with it, while the pedestal width is almost independent of it. The plasma density or collisionality gives initiallymore » a mild stabilization, increasing the pedestal slope and height, but above some threshold value its effect turns to a destabilization, reducing the pedestal width and height. Among several plasma shape parameters, the triangularity gives the most dominant effect, rapidly increasing the pedestal width and height, while the effect of elongation and squareness appears to be relatively weak. Implication of these edge results, particularly in relation to the global plasma performance, is discussed.« less

The effect of cigarette smoking and native bone height on dental implants placed immediately in sinuses grafted by hydraulic condensation.

PubMed

Lin, Thomas H S; Chen, Leon; Cha, Jennifer; Jeffcoat, Marjorie; Kao, Daniel W K; Nevins, Myron; Fiorellini, Joseph P

2012-06-01

The purpose of this study was to determine the effect of cigarette smoking and residual native bone height on the survival of dental implants placed immediately in grafted sinuses. In this retrospective study, 334 subject records were screened, and 75 subjects (155 implants) were included. Data collection based on treatment notes and radiographs included age, sex, smoking status, sinus floor bone height, dental implant information, and implant survival. The survival rates of implants for nonsmokers and smokers at stage-two surgery were 93% and 84%, respectively. After 12 months of functional loading, the survival rates of implants for nonsmokers and smokers were 87% (81 of 93) and 79% (49 of 62), respectively (P < .000). Analysis revealed that the effect of smoking on implant survival is significant when the preoperative bone height is less than 4 mm, with an 82.4% implant survival rate in nonsmokers compared to 60% in smokers (P < .05). Smoking should be considered as a high risk factor when implants are placed immediately in grafted sinuses, particularly in areas of limited bone height.

Standing Height as a Prevention Measure for Overuse Injuries of the Back in Alpine Ski Racing: A Kinematic and Kinetic Study of Giant Slalom

PubMed Central

Spörri, Jörg; Kröll, Josef; Fasel, Benedikt; Aminian, Kamiar; Müller, Erich

2018-01-01

Background: In alpine ski racing, typical loading patterns of the back include a combined occurrence of spinal bending, torsion, and high peak loads. These factors are known to be associated with high spinal disc loading and have been suggested to be attributable to different types of spine deterioration. However, little is known about the effect of standing height (ie, the distance between the bottom of the running surface of the ski and the ski boot sole) on the aforementioned back loading patterns. Purpose: To investigate the effect of reduced standing height on the skier’s overall trunk kinematics and the acting ground-reaction forces in giant slalom (GS) from an overuse injury prevention perspective. Study Design: Controlled laboratory study. Methods: Seven European Cup–level athletes skied a total of 224 GS turns with 2 different pairs of skis varying in standing height. Their overall trunk movement (frontal bending, lateral bending, and torsion angles) was measured based on 2 inertial measurement units located at the sacrum and sternum. Pressure insoles were used to determine the total ground-reaction force. Results: During the turn phase in which the greatest spinal disc loading is expected to occur, significantly lower total ground-reaction forces were observed for skis with a decreased standing height. Simultaneously, the skier’s overall trunk movement (ie, frontal bending, lateral bending, and torsion angles) remained unwaveringly high. Conclusion: Standing height is a reasonable measure to reduce the skier’s overall back loading in GS. Yet, when compared with the effects achievable by increased gate offsets in slalom, for instance, the preventative benefits of decreased standing height seem to be rather small. Clinical Relevance: To reduce the magnitude of overall back loading in GS and to prevent overuse injuries of the back, decreasing standing height might be an efficient approach. Nevertheless, the clinical relevance of the current findings, as well as the effectiveness of the measure “reduced standing height,” must be verified by epidemiological studies before its preventative potential can be judged as conclusive. PMID:29344540

Vision-Based Target Finding and Inspection of a Ground Target Using a Multirotor UAV System.

PubMed

Hinas, Ajmal; Roberts, Jonathan M; Gonzalez, Felipe

2017-12-17

In this paper, a system that uses an algorithm for target detection and navigation and a multirotor Unmanned Aerial Vehicle (UAV) for finding a ground target and inspecting it closely is presented. The system can also be used for accurate and safe delivery of payloads or spot spraying applications in site-specific crop management. A downward-looking camera attached to a multirotor is used to find the target on the ground. The UAV descends to the target and hovers above the target for a few seconds to inspect the target. A high-level decision algorithm based on an OODA (observe, orient, decide, and act) loop was developed as a solution to address the problem. Navigation of the UAV was achieved by continuously sending local position messages to the autopilot via Mavros. The proposed system performed hovering above the target in three different stages: locate, descend, and hover. The system was tested in multiple trials, in simulations and outdoor tests, from heights of 10 m to 40 m. Results show that the system is highly reliable and robust to sensor errors, drift, and external disturbance.

Effects of Stimulants on Height and Weight: A Review of the Literature

ERIC Educational Resources Information Center

Faraone, Stephen V.; Biederman, Joseph; Morley, Christopher P.; Spencer, Thomas J.

2008-01-01

The article reviews existing literature on the effects of stimulant medications on the growth of children with attention-deficit/hyperactivity disorder. It concludes that treatment with stimulants in childhood results in moderate growth deficit in height and weight.

Do Bat Gantries and Underpasses Help Bats Cross Roads Safely?

PubMed Central

Berthinussen, Anna; Altringham, John

2012-01-01

Major roads can reduce bat abundance and diversity over considerable distances. To mitigate against these effects and comply with environmental law, many European countries install bridges, gantries or underpasses to make roads permeable and safer to cross. However, through lack of appropriate monitoring, there is little evidence to support their effectiveness. Three underpasses and four bat gantries were investigated in northern England. Echolocation call recordings and observations were used to determine the number of bats using underpasses in preference to crossing the road above, and the height at which bats crossed. At gantries, proximity to the gantry and height of crossing bats were measured. Data were compared to those from adjacent, severed commuting routes that had no crossing structure. At one underpass 96% of bats flew through it in preference to crossing the road. This underpass was located on a pre-construction commuting route that allowed bats to pass without changing flight height or direction. At two underpasses attempts to divert bats from their original commuting routes were unsuccessful and bats crossed the road at the height of passing vehicles. Underpasses have the potential to allow bats to cross roads safely if built on pre-construction commuting routes. Bat gantries were ineffective and used by a very small proportion of bats, even up to nine years after construction. Most bats near gantries crossed roads along severed, pre-construction commuting routes at heights that put them in the path of vehicles. Crossing height was strongly correlated with verge height, suggesting that elevated verges may have some value in mitigation, but increased flight height may be at the cost of reduced permeability. Green bridges should be explored as an alternative form of mitigation. Robust monitoring is essential to assess objectively the case for mitigation and to ensure effective mitigation. PMID:22719941

Wind-Induced Air-Flow Patterns in an Urban Setting: Observations and Numerical Modeling

NASA Astrophysics Data System (ADS)

Sattar, Ahmed M. A.; Elhakeem, Mohamed; Gerges, Bishoy N.; Gharabaghi, Bahram; Gultepe, Ismail

2018-04-01

City planning can have a significant effect on wind flow velocity patterns and thus natural ventilation. Buildings with different heights are roughness elements that can affect the near- and far-field wind flow velocity. This paper aims at investigating the impact of an increase in building height on the nearby velocity fields. A prototype urban setting of buildings with two different heights (25 and 62.5 cm) is built up and placed in a wind tunnel. Wind flow velocity around the buildings is mapped at different heights. Wind tunnel measurements are used to validate a 3D-numerical Reynolds averaged Naviers-Stokes model. The validated model is further used to calculate the wind flow velocity patterns for cases with different building heights. It was found that increasing the height of some buildings in an urban setting can lead to the formation of large horseshoe vortices and eddies around building corners. A separation area is formed at the leeward side of the building, and the recirculation of air behind the building leads to the formation of slow rotation vortices. The opposite effect is observed in the wake (cavity) region of the buildings, where both the cavity length and width are significantly reduced, and this resulted in a pronounced increase in the wind flow velocity. A significant increase in the wind flow velocity in the wake region of tall buildings with a value of up to 30% is observed. The spatially averaged velocities around short buildings also increased by 25% compared to those around buildings with different heights. The increase in the height of some buildings is found to have a positive effect on the wind ventilation at the pedestrian level.

The topside ionospheric effective scale heights (HT) derived with ROCSAT-1 and ground-based Ionosonde observations at equatorial and mid-latitude stations

NASA Astrophysics Data System (ADS)

Ram Sudarsanam, Tulasi; Su, Shin-Yi; Liu, C. H.; Reinisch, Bodo

In this study, we propose the assimilation of topside in situ electron density data from ROCSAT-1 satellite along with the ionosonde measurements for accurate determination of topside iono-spheric effective scale heights (HT) using -Chapman function. The reconstructed topside elec-tron density profiles using these scale heights exhibit an excellent similitude with Jicamarca Incoherent Scatter Radar (ISR) profiles, and are much better representations than the existing methods of Reinisch-Huang method and/or the empirical IRI-2007 model. The main advan-tage with this method is that it allows the precise determination of the effective scale height (HT) and the topside electron density profiles at a dense network of ionosonde/digisonde sta-tions where no ISR facilities are available. The demonstration of the method is applied by investigating the diurnal, seasonal and solar activity variations of HT over the dip-equatorial station Jicamarca and the mid-latitude station Grahamstown. The diurnal variation of scale heights over Jicamarca consistently exhibits a morning time descent followed by a minimum around 0700-0800 LT and a pronounced maximum at noon during all the seasons of both high and moderate solar activity periods. Further, the scale heights exhibit a secondary maximum during the post-sunset hours of equinoctial and summer months, whereas the post-sunset peak is absent during the winter months. These typical features are further investigated using the topside ion properties obtained by ROCSAT-1 as well as SAMI2 model simulations. The re-sults consistently indicate that the diurnal variation of the effective scale height (HT) does not closely follow the plasma temperature variation and at equatorial latitudes is largely controlled by the vertical ExB drift.

Direct numerical simulation of flow over dissimilar, randomly distributed roughness elements: A systematic study on the effect of surface morphology on turbulence

NASA Astrophysics Data System (ADS)

Forooghi, Pourya; Stroh, Alexander; Schlatter, Philipp; Frohnapfel, Bettina

2018-04-01

Direct numerical simulations are used to investigate turbulent flow in rough channels, in which topographical parameters of the rough wall are systematically varied at a fixed friction Reynolds number of 500, based on a mean channel half-height h and friction velocity. The utilized roughness generation approach allows independent variation of moments of the surface height probability distribution function [thus root-mean-square (rms) surface height, skewness, and kurtosis], surface mean slope, and standard deviation of the roughness peak sizes. Particular attention is paid to the effect of the parameter Δ defined as the normalized height difference between the highest and lowest roughness peaks. This parameter is used to understand the trends of the investigated flow variables with departure from the idealized case where all roughness elements have the same height (Δ =0 ). All calculations are done in the fully rough regime and for surfaces with high slope (effective slope equal to 0.6-0.9). The rms roughness height is fixed for all cases at 0.045 h and the skewness and kurtosis of the surface height probability density function vary in the ranges -0.33 to 0.67 and 1.9 to 2.6, respectively. The goal of the paper is twofold: first, to investigate the possible effect of topographical parameters on the mean turbulent flow, Reynolds, and dispersive stresses particularly in the vicinity of the roughness crest, and second, to investigate the possibility of using the wall-normal turbulence intensity as a physical parameter for parametrization of the flow. Such a possibility, already suggested for regular roughness in the literature, is here extended to irregular roughness.

Pruning open-grown black cherry

Treesearch

T. J. Grisez

1967-01-01

Black cherry trees that had large crown ratios and were 4 to 6 inches d. b. h. were pruned to various heights. Epicormic sprouting was severe and diameter growth at breast height was reduced on trees pruned to 75 percent of their height. Most trees pruned to 50 percent show little or no adverse effect after 3 years.

47 CFR 73.811 - LPFM power and antenna height requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false LPFM power and antenna height requirements. 73... SERVICES RADIO BROADCAST SERVICES Low Power FM Broadcast Stations (LPFM) § 73.811 LPFM power and antenna... operate with maximum facilities of 100 watts effective radiated power (ERP) at 30 meters antenna height...

47 CFR 73.811 - LPFM power and antenna height requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 4 2012-10-01 2012-10-01 false LPFM power and antenna height requirements. 73... SERVICES RADIO BROADCAST SERVICES Low Power FM Broadcast Stations (LPFM) § 73.811 LPFM power and antenna... operate with maximum facilities of 100 watts effective radiated power (ERP) at 30 meters antenna height...

47 CFR 73.811 - LPFM power and antenna height requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false LPFM power and antenna height requirements. 73... SERVICES RADIO BROADCAST SERVICES Low Power FM Broadcast Stations (LPFM) § 73.811 LPFM power and antenna... operate with maximum facilities of 100 watts effective radiated power (ERP) at 30 meters antenna height...

The Effect of Perceived Height on Judgments of Women's Personality Orientations.

ERIC Educational Resources Information Center

Hensley, Wayne E.

A number of past investigations have documented a relationship between height and personality for males and children. A study was conducted to discover the perceived personality characteristics dependent on women's heights. Subjects, 501 college students, responded to one of four pictures of two women, via a questionnaire, estimating personality…

The Effectiveness, Costs and Coastal Protection Benefits of Natural and Nature-Based Defences.

PubMed

Narayan, Siddharth; Beck, Michael W; Reguero, Borja G; Losada, Iñigo J; van Wesenbeeck, Bregje; Pontee, Nigel; Sanchirico, James N; Ingram, Jane Carter; Lange, Glenn-Marie; Burks-Copes, Kelly A

2016-01-01

There is great interest in the restoration and conservation of coastal habitats for protection from flooding and erosion. This is evidenced by the growing number of analyses and reviews of the effectiveness of habitats as natural defences and increasing funding world-wide for nature-based defences-i.e. restoration projects aimed at coastal protection; yet, there is no synthetic information on what kinds of projects are effective and cost effective for this purpose. This paper addresses two issues critical for designing restoration projects for coastal protection: (i) a synthesis of the costs and benefits of projects designed for coastal protection (nature-based defences) and (ii) analyses of the effectiveness of coastal habitats (natural defences) in reducing wave heights and the biophysical parameters that influence this effectiveness. We (i) analyse data from sixty-nine field measurements in coastal habitats globally and examine measures of effectiveness of mangroves, salt-marshes, coral reefs and seagrass/kelp beds for wave height reduction; (ii) synthesise the costs and coastal protection benefits of fifty-two nature-based defence projects and; (iii) estimate the benefits of each restoration project by combining information on restoration costs with data from nearby field measurements. The analyses of field measurements show that coastal habitats have significant potential for reducing wave heights that varies by habitat and site. In general, coral reefs and salt-marshes have the highest overall potential. Habitat effectiveness is influenced by: a) the ratios of wave height-to-water depth and habitat width-to-wavelength in coral reefs; and b) the ratio of vegetation height-to-water depth in salt-marshes. The comparison of costs of nature-based defence projects and engineering structures show that salt-marshes and mangroves can be two to five times cheaper than a submerged breakwater for wave heights up to half a metre and, within their limits, become more cost effective at greater depths. Nature-based defence projects also report benefits ranging from reductions in storm damage to reductions in coastal structure costs.

Two-step design method for highly compact three-dimensional freeform optical system for LED surface light source.

PubMed

Mao, Xianglong; Li, Hongtao; Han, Yanjun; Luo, Yi

2014-10-20

Designing an illumination system for a surface light source with a strict compactness requirement is quite challenging, especially for the general three-dimensional (3D) case. In accordance with the two key features of an expected illumination distribution, i.e., a well-controlled boundary and a precise illumination pattern, a two-step design method is proposed in this paper for highly compact 3D freeform illumination systems. In the first step, a target shape scaling strategy is combined with an iterative feedback modification algorithm to generate an optimized freeform optical system with a well-controlled boundary of the target distribution. In the second step, a set of selected radii of the system obtained in the first step are optimized to further improve the illuminating quality within the target region. The method is quite flexible and effective to design highly compact optical systems with almost no restriction on the shape of the desired target field. As examples, three highly compact freeform lenses with ratio of center height h of the lens and the maximum dimension D of the source ≤ 2.5:1 are designed for LED surface light sources to form a uniform illumination distribution on a rectangular, a cross-shaped and a complex cross pierced target plane respectively. High light control efficiency of η > 0.7 as well as low relative standard illumination deviation of RSD < 0.07 is obtained simultaneously for all the three design examples.

Radiant heat loss, an unexploited path for heat stress reduction in shaded cattle.

PubMed

Berman, A; Horovitz, T

2012-06-01

Reducing thermal radiation on shaded animals reduces heat stress independently of other means of stress relief. Radiant heat exchange was estimated as a function of climate, shade structure, and animal density. Body surface portion exposed to radiant sources in shaded environments was determined by geometrical relations to determine angles of view of radiation sources (roof underside, sky, sun-exposed ground, shaded ground) on the animal's surface. The relative representation of environment radiation sources on the body surface was determined. Animal thermal radiation balance was derived from radiant heat gained from radiation sources (including surrounding animals) and that lost from the animal surface. The animal environment was assumed to have different shade dimensions and temperatures. These were summed to the radiant heat balance of the cow. The data formed served to estimate the effect of changes in intensity of radiation sources, roof and shaded surface dimensions, and animal density on radiant heat balance (Rbal) of cattle. Roof height effect was expressed by effect of roof temperature on Rbal. Roof underside temperature (35 to 75°C) effect on Rbal was reduced by roof height. If roof height were 4m, an increase in its underside temperature from 35 to 75°C would increase mean Rbal from -63 to -2 W·m⁻², whereas if roof height were 10 m, Rbal would only increase from -99 to -88 W·m⁻². A hot ground temperature increase from 35 to 65°C reduced mean Rbal heat loss from -45 to 3 W·m⁻². Increasing the surface of the shaded area had only a minor effect on Rbal and on the effect of hot ground on Rbal. Increasing shade roof height reduced the effect of roof temperature on Rbal to minor levels when height was > 8m. Increasing the roof height from 4 to 10 m decreased Rbal from -32 to -94 W·m⁻². Increasing indirect radiation from 100 to 500 W·m⁻² was associated with an increase in Rbal from -135 to +23 W·m⁻². Their combined effects were lower Rbal with increasing roof height and a reduction in rate of decrease with increasing level of indirect radiation. Roof height as an Rbal attenuator declined with increasing indirect radiation level. The latter factor might be reduced by lowering roof surface radiation absorption and through roof heat transfer, as well as by use of shade structure elements to reduce indirect radiation in the shaded area. Radiant heat from the cow body surface may be reduced by lower cow density. Radiant heat attenuation may thus further elevate animal productivity in warm climates, with no associated operation costs. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Laser long-range remote-sensing program experimental results

NASA Astrophysics Data System (ADS)

Highland, Ronald G.; Shilko, Michael L.; Fox, Marsha J.; Gonglewski, John D.; Czyzak, Stanley R.; Dowling, James A.; Kelly, Brian; Pierrottet, Diego F.; Ruffatto, Donald; Loando, Sharon; Matsuura, Chris; Senft, Daniel C.; Finkner, Lyle; Rae, Joe; Gallegos, Joe

1995-12-01

A laser long range remote sensing (LRS) program is being conducted by the United States Air Force Phillips Laboratory (AF/PL). As part of this program, AF/PL is testing the feasibility of developing a long path CO(subscript 2) laser-based DIAL system for remote sensing. In support of this program, the AF/PL has recently completed an experimental series using a 21 km slant- range path (3.05 km ASL transceiver height to 0.067 km ASL target height) at its Phillips Laboratory Air Force Maui Optical Station (AMOS) facility located on Maui, Hawaii. The dial system uses a 3-joule, (superscript 13)C isotope laser coupled into a 0.6 m diameter telescope. The atmospheric optical characterization incorporates information from an infrared scintillometer co-aligned to the laser path, atmospheric profiles from weather balloons launched from the target site, and meteorological data from ground stations at AMOS and the target site. In this paper, we report a description of the experiment configuration, a summary of the results, a summary of the atmospheric conditions and their implications to the LRS program. The capability of such a system for long-range, low-angle, slant-path remote sensing is discussed. System performance issues relating to both coherent and incoherent detection methods, atmospheric limitations, as well as, the development of advanced models to predict performance of long range scenarios are presented.

Fabrication of long-focal-length plano-convex microlens array by combining the micro-milling and injection molding processes.

PubMed

Chen, Lei; Kirchberg, Stefan; Jiang, Bing-Yan; Xie, Lei; Jia, Yun-Long; Sun, Lei-Lei

2014-11-01

A uniform plano-convex spherical microlens array with a long focal length was fabricated by combining the micromilling and injection molding processes in this work. This paper presents a quantitative study of the injection molding process parameters on the uniformity of the height of the microlenses. The variation of the injection process parameters, i.e., barrel temperature, mold temperature, injection speed, and packing pressure, was found to have a significant effect on the uniformity of the height of the microlenses, especially the barrel temperature. The filling-to-packing switchover point is also critical to the uniformity of the height of the microlenses. The optimal uniformity was achieved when the polymer melts completely filled the mold cavity, or even a little excessively filled the cavity, during the filling stage. In addition, due to the filling resistance, the practical filling-to-packing switchover point can vary with the change of the filling processing conditions and lead to a non-negligible effect on the uniformity of the height of the microlenses. Furthermore, the effect of injection speed on the uniformity of the height of the microlenses was analyzed in detail. The results indicated that the effect of injection speed on the uniformity of the height of the microlenses is mainly attributed to the two functions of injection speed: transferring the filling-to-packing switchover point and affecting the distribution of residual flow stress in the polymer melt.

The Effects of Microgravity on Seated Height (Spinal Elongation)

NASA Technical Reports Server (NTRS)

Young, K. S.; Rajulu, S.

2011-01-01

ABSTRACT Many physiological factors, such as spinal elongation, fluid shifts, bone atrophy, and muscle loss, occur during an exposure to a microgravity environment. Spinal elongation is just one of the factors that can also affect the safety and performance of a crewmember while in space. Spinal elongation occurs due to the lack of gravity/compression on the spinal column. This allows for the straightening of the natural spinal curve. There is a possible fluid shift in the inter-vertebral disks that may also result in changes in height. This study aims at collecting the overall change in seated height for crewmembers exposed to a microgravity environment. During previous Programs, Apollo-Soyuz Test Project (ASTP) and Skylab, spinal elongation data was collected from a small number of subjects in a standing posture but were limited in scope. Data from these studies indicated a quick increase in stature during the first few days of weightlessness, after which stature growth reached a plateau resulting in up to a 3% increase of the original measurement [1-5]. However, this data was collected only for crewmembers in standing posture and not in a seated posture. Seated height may have a different effect than standing height due to a change in posture as well as due to a compounded effect of wearing restraints and a potential compression of the gluteal area. Seated height was deemed as a critical measurement in the design of the Constellation Program s (CxP) Crew Exploration Vehicle (CEV), called Orion which is now the point-of-departure vehicle for the Multi-Purpose Crew Vehicle (MPCV) Program; therefore a better understanding of the effects of microgravity on seated height is necessary. Potential changes in seated height that may not have impacted crew accommodation in previous Programs will have significant effects on crew accommodation due to the layout of seats in the Orion.. The current and existing configuration is such that the four crewmembers are stacked two by two with the commander and pilot seats on the top and the two remaining seats underneath, thereby limiting the amount of clearance for the crewmembers seated in the bottom seat. The inner mold line of these types of vehicles are fixed due to other design constraints; therefore, it is essential that all seats incorporate additional clearance to account for adequate spinal growth thereby ensuring that the crew can safely ingress the seat and be strapped in prior to its return to earth. If there is not enough clearance to account for spinal growth deltas between seats then there is the potential that crewmembers will not be able to comfortably and safely fit into their seats. The crewmember in the bottom stacked seat may even have negative clearance with the seat above him or her which could lead to potential ingress/egress issues or potentially injury of the crewmember during landing. These impacts are specific to these types of vehicles with stacked seat configuration. Without proper knowledge of the amount of spinal elongation, or growth, which occurs due to microgravity and space flight, the design of future vehicle(s) or suits may cause injury, discomfort, and limit crew accommodation and crew complements. The experiment primarily aimed to collect seated height data for subjects exposed to microgravity environments, and feed new information regarding the effect of elongation of the spine forward into the design of the Orion. The data collected during the experiment included, two seated height measurement and two digital pictures of seated height pre-, in-, and post-flight. In addition to seated height, crewmembers had an optional task of collecting stature , standing height. Seated height data was obtained from 29 crewmembers that included 8 ISS increment crew (2 females and 6 males) and 21 Shuttle crew (1 female, 20 males), and whose mean age was 48 years ( 4 years). This study utilized the last six Shuttle flights, STS-128 to STS-134. The results show that partipating crewmembers experienced growth up to 6% in seated height and up to 3% in stature. Based on the worst case statistical analysis of the subject data, the recommended seated height growth of 6% will be provided to the designers as the necessary seated height adjustment.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maurer, K. D.; Bohrer, G.; Kenny, W. T.

Surface roughness parameters, namely the roughness length and displacement height, are an integral input used to model surface fluxes. However, most models assume these parameters to be a fixed property of plant functional type and disregard the governing structural heterogeneity and dynamics. In this study, we use large-eddy simulations to explore, in silico, the effects of canopy-structure characteristics on surface roughness parameters. We performed a virtual experiment to test the sensitivity of resolved surface roughness to four axes of canopy structure: (1) leaf area index, (2) the vertical profile of leaf density, (3) canopy height, and (4) canopy gap fraction.more » We found roughness parameters to be highly variable, but uncovered positive relationships between displacement height and maximum canopy height, aerodynamic canopy height and maximum canopy height and leaf area index, and eddy-penetration depth and gap fraction. We also found negative relationships between aerodynamic canopy height and gap fraction, as well as between eddy-penetration depth and maximum canopy height and leaf area index. We generalized our model results into a virtual "biometric" parameterization that relates roughness length and displacement height to canopy height, leaf area index, and gap fraction. Using a decade of wind and canopy-structure observations in a site in Michigan, we tested the effectiveness of our model-driven biometric parameterization approach in predicting the friction velocity over heterogeneous and disturbed canopies. We compared the accuracy of these predictions with the friction-velocity predictions obtained from the common simple approximation related to canopy height, the values calculated with large-eddy simulations of the explicit canopy structure as measured by airborne and ground-based lidar, two other parameterization approaches that utilize varying canopy-structure inputs, and the annual and decadal means of the surface roughness parameters at the site from meteorological observations. We found that the classical representation of constant roughness parameters (in space and time) as a fraction of canopy height performed relatively well. Nonetheless, of the approaches we tested, most of the empirical approaches that incorporate seasonal and interannual variation of roughness length and displacement height as a function of the dynamics of canopy structure produced more precise and less biased estimates for friction velocity than models with temporally invariable parameters.« less

Dietary L-arginine supplementation improves the intestinal development through increasing mucosal Akt and mammalian target of rapamycin signals in intra-uterine growth retarded piglets.

PubMed

Wang, Yuanxiao; Zhang, Lili; Zhou, Genlai; Liao, Zhiyong; Ahmad, Hussain; Liu, Wenbin; Wang, Tian

2012-10-28

Intra-uterine growth retardation (IUGR) impairs postnatal growth and development of the small intestine (SI) in neonatal pigs and infants. L-Arginine (Arg), a critical amino acid involved in promoting growth and metabolism in young mammals, is more deficient in IUGR fetuses. However, little is known whether dietary Arg supplementation would accelerate the impaired development of the SI induced by IUGR in piglets. In the present study, a total of six litters of newborn piglets were used. In each litter, one normal and two IUGR littermates were obtained. Piglets were fed milk-based diets supplemented with 0 (Normal), 0 (IUGR) and 0·60% Arg (IUGR+Arg) from 7 to 14 d of age, respectively. Compared with Normal piglets at 14 d of age, IUGR decreased (P < 0·05) the growth performance, entire SI weight, and villus height in the jejunum and ileum. IUGR piglets had lower (P < 0·05) mucosal concentrations of Arg, insulin, insulin growth factor 1, as well as phosphorylated Akt, mammalian target of rapamycin (mTOR) and p70 S6 kinase but higher (P < 0·05) enterocyte apoptosis index (AI). After Arg treatment in IUGR piglets, the growth performance, weight of entire SI and mucosa, and villus height in the jejunum and ileum were increased (P < 0·05). Diet supplemented with Arg also increased (P < 0·05) the levels of Arg, insulin, phosphorylated Akt and mTOR in SI mucosa of IUGR piglets, and decreased (P < 0·05) the AI and caspase-3 activity. In conclusion, Arg has a beneficiary effect in improving the impaired SI development in IUGR piglets via regulating cell apoptosis and activating Akt and mTOR signals in SI mucosa.

Effect of Plyometric Training on Vertical Jump Performance in Female Athletes: A Systematic Review and Meta-Analysis.

PubMed

Stojanović, Emilija; Ristić, Vladimir; McMaster, Daniel Travis; Milanović, Zoran

2017-05-01

Plyometric training is an effective method to prevent knee injuries in female athletes; however, the effects of plyometric training on jump performance in female athletes is unclear. The aim of this systematic review and meta-analysis was to determine the effectiveness of plyometric training on vertical jump (VJ) performance of amateur, collegiate and elite female athletes. Six electronic databases were searched (PubMed, MEDLINE, ERIC, Google Scholar, SCIndex and ScienceDirect). The included studies were coded for the following criteria: training status, training modality and type of outcome measures. The methodological quality of each study was assessed using the physiotherapy evidence database (PEDro) scale. The effects of plyometric training on VJ performance were based on the following standardised pre-post testing effect size (ES) thresholds: trivial (<0.20), small (0.21-0.60), moderate (0.61-1.20), large (1.21-2.00), very large (2.01-4.00) and extremely large (>4.00). A total of 16 studies met the inclusion criteria. The meta-analysis revealed that plyometric training had a most likely moderate effect on countermovement jump (CMJ) height performance (ES = 1.09; 95 % confidence interval [CI] 0.57-1.61; I 2  = 75.60 %). Plyometric training interventions of less than 10 weeks in duration had a most likely small effect on CMJ height performance (ES = 0.58; 95 % CI 0.25-0.91). In contrast, plyometric training durations greater than 10 weeks had a most likely large effect on CMJ height (ES = 1.87; 95 % CI 0.73-3.01). The effect of plyometric training on concentric-only squat jump (SJ) height was likely small (ES = 0.44; 95 % CI -0.09 to 0.97). Similar effects were observed on SJ height after 6 weeks of plyometric training in amateur (ES = 0.35) and young (ES = 0.49) athletes, respectively. The effect of plyometric training on CMJ height with the arm swing was likely large (ES = 1.31; 95 % CI -0.04 to 2.65). The largest plyometric training effects were observed in drop jump (DJ) height performance (ES = 3.59; 95 % CI -3.04 to 10.23). Most likely extremely large plyometric training effects on DJ height performance (ES = 7.07; 95 % CI 4.71-9.43) were observed following 12 weeks of plyometric training. In contrast, a possibly small positive training effect (ES = 0.30; 95 % CI -0.63 to 1.23) was observed following 6 weeks of plyometric training. Plyometric training is an effective form of training to improve VJ performance (e.g. CMJ, SJ and DJ) in female athletes. The benefits of plyometric training on VJ performance are greater for interventions of longer duration (≥10 weeks).

Population genetic differentiation of height and body mass index across Europe

PubMed Central

Robinson, Matthew R.; Hemani, Gibran; Medina-Gomez, Carolina; Mezzavilla, Massimo; Esko, Tonu; Shakhbazov, Konstantin; Powell, Joseph E.; Vinkhuyzen, Anna; Berndt, Sonja I.; Gustafsson, Stefan; Justice, Anne E.; Kahali, Bratati; Locke, Adam E.; Pers, Tune H.; Vedantam, Sailaja; Wood, Andrew R.; van Rheenen, Wouter; Andreassen, Ole A.; Gasparini, Paolo; Metspalu, Andres; van den Berg, Leonard H.; Veldink, Jan H.; Rivadeneira, Fernando; Werge, Thomas M.; Abecasis, Goncalo R.; Boomsma, Dorret I.; Chasman, Daniel I.; de Geus, Eco J.C.; Frayling, Timothy M.; Hirschhorn, Joel N.; Hottenga, Jouke Jan; Ingelsson, Erik; Loos, Ruth J.F.; Magnusson, Patrik K. E.; Martin, Nicholas G.; Montgomery, Grant W.; North, Kari E.; Pedersen, Nancy L.; Spector, Timothy D.; Speliotes, Elizabeth K.; Goddard, Michael E.; Yang, Jian; Visscher, Peter M.

2016-01-01

Across-nation differences in the mean of complex traits such as obesity and stature are common1–8, but the reasons for these differences are not known. Here, we find evidence that many independent loci of small effect combine to create population genetic differences in height and body mass index (BMI) in a sample of 9,416 individuals across 14 European countries. Using discovery data on over 250,000 individuals and unbiased estimates of effect sizes from 17,500 sib pairs, we estimate that 24% (95% CI: 9%, 41%) and 8% (95% CI: 4%, 16%) of the captured additive genetic variance for height and BMI across Europe are attributed to among-population genetic differences. Population genetic divergence differed significantly from that expected under a null model (P <3.94e−08 for height and P<5.95e−04 for BMI), and we find an among-population genetic correlation for tall and slender nations (r = −0.80 (95% CI: −0.95, −0.60), contrasting no genetic correlation between height and BMI within populations (r = −0.016, 95% CI: −0.041, 0.001), consistent with selection on height genes that also act to reduce BMI. Observations of mean height across nations correlated with the predicted genetic means for height (r = 0.51, P<0.001), so that a proportion of observed differences in height within Europe reflect genetic factors. In contrast, observed mean BMI did not correlate with the genetic estimates (P<0.58), implying that genetic differentiation in BMI is masked by environmental differences across Europe. PMID:26366552

The Influence of Artificial Cervical Disc Prosthesis Height on the Cervical Biomechanics: A Finite Element Study.

PubMed

Yuan, Wei; Zhang, Haiping; Zhou, Xiaoshu; Wu, Weidong; Zhu, Yue

2018-05-01

Artificial cervical disc replacement is expected to maintain normal cervical biomechanics. At present, the effect of the Prestige LP prosthesis height on cervical biomechanics has not been thoroughly studied. This finite element study of the cervical biomechanics aims to predict how the parameters, like range of motion (ROM), adjacent intradiscal pressure, facet joint force, and bone-implant interface stress, are affected by different heights of Prestige LP prostheses. The finite element model of intact cervical spine (C3-C7) was obtained from our previous study, and the model was altered to implant Prestige LP prostheses at the C5-C6 level. The effects of the height of 5, 6, and 7 mm prosthesis replacement on ROM, adjacent intradiscal pressure, facet joint force, as well as the distribution of bone-implant interface stress were examined. ROM, adjacent intradiscal pressure, and facet joint force increased with the prosthesis height, whereas ROM and facet joint force decreased at C5-C6. The maximal stress on the inferior surface of the prostheses was greater than that on the superior surface, and the stresses increased with the prosthesis height. The biomechanical changes were slightly affected by the height of 5 and 6 mm prostheses, but were strongly affected by the 7-mm prosthesis. An appropriate height of the Prestige LP prosthesis can preserve normal ROM, adjacent intradiscal pressure, and facet joint force. Prostheses with a height of ≥2 mm than normal can lead to marked changes in the cervical biomechanics and bone-implant interface stress. Copyright © 2018 Elsevier Inc. All rights reserved.

Sputter deposition of indium tin oxide onto zinc pthalocyanine: Chemical and electronic properties of the interface studied by photoelectron spectroscopy

NASA Astrophysics Data System (ADS)

Gassmann, Jürgen; Brötz, Joachim; Klein, Andreas

2012-02-01

The interface chemistry and the energy band alignment at the interface formed during sputter deposition of transparent conducting indium tin oxide (ITO) onto the organic semiconductor zinc phtalocyanine (ZnPc), which is important for inverted, transparent, and stacked organic light emitting diodes, is studied by in situ photoelectron spectroscopy (XPS and UPS). ITO was sputtered at room temperature and a low power density with a face to face arrangement of the target and substrate. With these deposition conditions, no chemical reaction and a low barrier height for charge injection at this interface are observed. The barrier height is comparable to those observed for the reverse deposition sequence, which also confirms the absence of sputter damage.

Improving ergonomics in milking parlors: empirical findings for optimal working heights in five milking parlor types.

PubMed

Cockburn, M; Savary, P; Kauke, M; Schick, M; Hoehne-Hückstädt, U; Hermanns, I; Ellegast, R

2015-02-01

Milking postures have shifted from seated milking in tethered stalls to milking in a standing position in parlors. However, the musculoskeletal workload of dairy farmers remains high. Previous studies have shown that different working heights affect ergonomics, but they could not objectively evaluate and quantify the workload. The aim of the present study was to assess the effect of working height in different milking parlor types on the milker's workload during the task of attaching milking clusters. Computer-assisted recording and long-term analysis of movements were used to record positions of joints and body regions while performing certain tasks in terms of angular degrees of joints (ADJ) according to the neutral zero method. The 5th, 50th, and 95th percentiles described the distribution of angular degree values measured for each joint. The ADJ were evaluated according to international standards and other scientific literature on the issue to assess the muscular load. The workload was compared between 5 parlor types (auto tandem, herringbone 30°, herringbone 50°, parallel, and rotary) on 15 farms with 2 subjects per parlor and 1 milking period per subject. The working height was defined as a coefficient based on the milker's body height, the floor level, and the cow's udder height. The data recorded during the attachment task were analyzed using generalized linear mixed-effects models taking into account the hierarchical experimental design. The results indicated that the interaction of the cow's udder height, the milker's body height, and the parlor type had a larger effect on ergonomics than each parameter had independently. The interaction was significant in at least 1 of the 3 percentiles in 28 out of 31 ADJ. The postural differences between parlor types, however, were minor. A milking health formula was created to calculate the ideal depth of pit by considering the parlor type, the milker's height, and the mean herd udder height. This formula can be used to develop individual recommendations for future parlor construction. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Local Topography Effect on Plant Area Index Profile Calculation from Small Footprint Airborne Laser Scanning

NASA Astrophysics Data System (ADS)

Liu, J.; Wang, T.; Skidmore, A. K.; Heurich, M.

2016-12-01

The plant area index (PAI) profile is a quantitative description of how plants (including leaves and woody materials) are distributed vertically, as a function of height. PAI profiles can be used for many applications including biomass estimation, radiative transfer modelling, fire fuel modelling and wildlife habitat assessment. With airborne laser scanning (ALS), forest structure underneath the canopy surface can be detected. PAI profiles can be calculated through estimates of the vertically resolved gap fraction from ALS data. In this process, a gridding or aggregation step is often involved. Most current research neglects local topographic change, and utilizes a height normalization algorithm to achieve a local or relative height, implying a flat local terrain assumption inside the grid or aggregation area. However, in mountainous forest, this assumption is often not valid. Therefore, in this research, the local topographic effect on the PAI profile calculation was studied. Small footprint discrete multi-return ALS data was acquired over the Bavarian Forest National Park under leaf-off and leaf-on conditions. Ground truth data, including tree height, canopy cover, DBH as well as digital hemispherical photos, were collected in 30 plots. These plots covered a wide range of forest structure, plant species, local topography condition and understory coverage. PAI profiles were calculated both with and without height normalization. The difference between height normalized and non-normalized profiles were evaluated with the coefficient of variation of root mean squared difference (CV-RMSD). The derived metric PAI values from PAI profiles were also evaluated with ground truth PAI from the hemispherical photos. Results showed that change in local topography had significant effects on the PAI profile. The CV-RMSD between PAI profile results calculated with or without height normalization ranged from 24.5% to 163.9%. Height normalization (neglecting topography change) can lead to offsets in the height of plant material that could potentially cause large errors and uncertainty when used in applications utilizing absolute height such as radiative transfer modeling and fire fuel modelling. This research demonstrates that when calculating the PAI profile from ALS, local topography has to be taken into account.

Optimal control of the ballistic motion of Airy beams.

PubMed

Hu, Yi; Zhang, Peng; Lou, Cibo; Huang, Simon; Xu, Jingjun; Chen, Zhigang

2010-07-01

We demonstrate the projectile motion of two-dimensional truncated Airy beams in a general ballistic trajectory with controllable range and height. We show that the peak beam intensity can be delivered to any desired location along the trajectory as well as repositioned to a given target after displacement due to propagation through disordered or turbulent media.

Height Response to Harvesting Intensity and Site Preparation in Four Young Loblolly Pine Plantations

Treesearch

Thomas J. Dean; Ray A. Newbold

2002-01-01

A study was conducted to analyze the general effects of harvesting intensity and postharvest treatments on the average, three-year height of loblolly pine (Pinus taeda L.). This was accomplished by analyzing treatment effects across four study sites by treating the locations as random effects in the statistical model. Whole-tree harvesting using...

Total pubertal growth in patients with juvenile idiopathic arthritis treated with growth hormone: analysis of a single center.

PubMed

Bechtold, S; Beyerlein, A; Ripperger, P; Roeb, J; Dalla Pozza, R; Häfner, R; Haas, J P; Schmidt, H

2012-10-01

Growth failure is a permanent sequelae in juvenile idiopathic arthritis (JIA). The aim of the study was to compare pubertal growth in control and growth hormone (GH) treated JIA subjects. 64 children with JIA at a mean age of 10.38 ± 2.80 years were enrolled and followed until final height (measured in standard deviation (SD) scores). 39 children (20 m) received GH therapy and 24 (9 m) served as controls. GH dose was 0.33 mg/kg/week. Linear regression analysis was performed to identify factors influencing total pubertal growth. Mean total pubertal growth was 21.1 ± 1.3 cm (mean ± SD) in GH treated JIA patients and 13.8 ± 1.5 cm in controls. Final height was significantly higher with GH treatment (-1.67 ± 1.20 SD) compared to controls (-3.20 ± 1.84 SD). Linear regression model identified age at onset of puberty (ß=-4.2,CI: -5.9, -2.6 in controls and ß=-2.3,CI: -3.6, -1.1 in GH treated) as the main factor for total pubertal growth. Final height SDS was determined by the difference to target height at onset of puberty (ß=-0.59;CI: -0.80, -0.37 in controls and ß=-0.30,CI: -0.52, -0.08 in GH treated), age at onset of puberty (ß=0.47;CI:0.02,0.93 in controls and 0.23;CI: -0.00,0.46 in GH treated) and height gain during puberty (ß=0.13;CI:0.05,0.21 in controls and ß=0.11;CI:0.07,0.16 in GH treated). Total pubertal growth in JIA patients treated with GH was increased by a factor of 1.5 greater in comparison to controls leading to a significantly better final height. To maximize final height GH treatment should be initiated early to reduce the height deficit at onset of puberty. Copyright © 2012 Elsevier Ltd. All rights reserved.

Height, social comparison, and paranoia: An immersive virtual reality experimental study

PubMed Central

Freeman, Daniel; Evans, Nicole; Lister, Rachel; Antley, Angus; Dunn, Graham; Slater, Mel

2014-01-01

Mistrust of others may build upon perceptions of the self as vulnerable, consistent with an association of paranoia with perceived lower social rank. Height is a marker of social status and authority. Therefore we tested the effect of manipulating height, as a proxy for social rank, on paranoia. Height was manipulated within an immersive virtual reality simulation. Sixty females who reported paranoia experienced a virtual reality train ride twice: at their normal and reduced height. Paranoia and social comparison were assessed. Reducing a person's height resulted in more negative views of the self in comparison with other people and increased levels of paranoia. The increase in paranoia was fully mediated by changes in social comparison. The study provides the first demonstration that reducing height in a social situation increases the occurrence of paranoia. The findings indicate that negative social comparison is a cause of mistrust. PMID:24924485

Error Analysis and Validation for Insar Height Measurement Induced by Slant Range

NASA Astrophysics Data System (ADS)

Zhang, X.; Li, T.; Fan, W.; Geng, X.

2018-04-01

InSAR technique is an important method for large area DEM extraction. Several factors have significant influence on the accuracy of height measurement. In this research, the effect of slant range measurement for InSAR height measurement was analysis and discussed. Based on the theory of InSAR height measurement, the error propagation model was derived assuming no coupling among different factors, which directly characterise the relationship between slant range error and height measurement error. Then the theoretical-based analysis in combination with TanDEM-X parameters was implemented to quantitatively evaluate the influence of slant range error to height measurement. In addition, the simulation validation of InSAR error model induced by slant range was performed on the basis of SRTM DEM and TanDEM-X parameters. The spatial distribution characteristics and error propagation rule of InSAR height measurement were further discussed and evaluated.

Height, education and later-life cognition in Latin America and the Caribbean.

PubMed

Maurer, Jürgen

2010-07-01

Building on previous evidence from the U.S., this study investigates the relationship between anthropometric markers (height and knee height), early-life conditions, education, and cognitive function in later life among urban elderly from Latin America and the Caribbean. I document a positive association between height and later-life cognitive function, which is larger for women than for men. This sex difference increases when I address potential feedback effects from mid- and later-life circumstances on stature by using knee height as an instrument for height. Specifically, while the estimates for women remain largely unchanged, I only find a diminished and statistically insignificant association between instrumented height and later-life cognition for men. This finding suggests that at least part of the association between height and later-life cognition among men may stem from common third factors that are correlated with both height and later-life cognition, such as adverse occupational exposures or health events during mid- and later life. Extended models that also include education further diminish the association between height and later-life cognition. Education displays strong positive gradients with the employed measures of childhood circumstances - including height - which points to education as a potential pathway linking early-life conditions and later-life cognitive function. 2010 Elsevier B.V. All rights reserved.

Automatic rice crop height measurement using a field server and digital image processing.

PubMed

Sritarapipat, Tanakorn; Rakwatin, Preesan; Kasetkasem, Teerasit

2014-01-07

Rice crop height is an important agronomic trait linked to plant type and yield potential. This research developed an automatic image processing technique to detect rice crop height based on images taken by a digital camera attached to a field server. The camera acquires rice paddy images daily at a consistent time of day. The images include the rice plants and a marker bar used to provide a height reference. The rice crop height can be indirectly measured from the images by measuring the height of the marker bar compared to the height of the initial marker bar. Four digital image processing steps are employed to automatically measure the rice crop height: band selection, filtering, thresholding, and height measurement. Band selection is used to remove redundant features. Filtering extracts significant features of the marker bar. The thresholding method is applied to separate objects and boundaries of the marker bar versus other areas. The marker bar is detected and compared with the initial marker bar to measure the rice crop height. Our experiment used a field server with a digital camera to continuously monitor a rice field located in Suphanburi Province, Thailand. The experimental results show that the proposed method measures rice crop height effectively, with no human intervention required.

Use of Linear Perspective Scene Cues in a Simulated Height Regulation Task

NASA Technical Reports Server (NTRS)

Levison, W. H.; Warren, R.

1984-01-01

As part of a long-term effort to quantify the effects of visual scene cuing and non-visual motion cuing in flight simulators, an experimental study of the pilot's use of linear perspective cues in a simulated height-regulation task was conducted. Six test subjects performed a fixed-base tracking task with a visual display consisting of a simulated horizon and a perspective view of a straight, infinitely-long roadway of constant width. Experimental parameters were (1) the central angle formed by the roadway perspective and (2) the display gain. The subject controlled only the pitch/height axis; airspeed, bank angle, and lateral track were fixed in the simulation. The average RMS height error score for the least effective display configuration was about 25% greater than the score for the most effective configuration. Overall, larger and more highly significant effects were observed for the pitch and control scores. Model analysis was performed with the optimal control pilot model to characterize the pilot's use of visual scene cues, with the goal of obtaining a consistent set of independent model parameters to account for display effects.

Correlation between amplitude of spin accumulation signals investigated by Hanle effect measurement and effective junction barrier height in CoFe/MgO/n{sup +}-Si junctions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saito, Y., E-mail: yoshiaki.saito@toshiba.co.jp; Ishikawa, M.; Sugiyama, H.

2015-05-07

Correlation between the amplitude of the spin accumulation signals and the effective barrier height estimated from the slope of the log (RA) - t{sub MgO} plot (RA: resistance area product, t{sub MgO}: thickness of MgO tunnel barrier) in CoFe/MgO/n{sup +}-Si junctions was investigated. The amplitude of spin accumulation signals increases with increasing effective barrier heights. This increase of the amplitude of spin accumulation is originated from the increase of the spin polarization (P{sub Si}) in Si. The estimated absolute values of P{sub Si} using three-terminal Hanle signals are consistent with those estimated by four-terminal nonlocal-magnetoresistance (MR) and two-terminal local-MR. Tomore » demonstrate large spin accumulation in Si bulk band and enhance the local-MR through Si channel, these results indicate that the increase of the effective barrier height at ferromagnet/(tunnel barrier)/n{sup +}-Si junction electrode is important.« less

Assessment of headlamp glare and potential countermeasures : the effects of headlamp mounting height

DOT National Transportation Integrated Search

2008-01-01

This project examined the effects of headlamp mounting height on the disability and the sensation of discomfort caused by glare. This was performed through a field study and a simulation study. In the field study, subjects evaluated the degree of gla...

Effects of changes in effective rail height on barrier performance. Volume 1, Research report

DOT National Transportation Integrated Search

1987-04-01

The objective of this project was to determine the critical rail mounting heights to prevent underride and override for traffic barriers. W-beam guardrails, which are the most commonly specified barrier in the U. S., were used to develop criteria for...

[Fire behavior of Mongolian oak leaves fuel-bed under no-wind and zero-slope conditions. I. Factors affecting fire spread rate and modeling].

PubMed

Jin, Sen; Liu, Bo-Fei; Di, Xue-Ying; Chu, Teng-Fei; Zhang, Ji-Li

2012-01-01

Aimed to understand the fire behavior of Mongolian oak leaves fuel-bed under field condition, the leaves of a secondary Mongolian oak forest in Northeast Forestry University experimental forest farm were collected and brought into laboratory to construct fuel-beds with varied loading, height, and moisture content, and a total of 100 experimental fires were burned under no-wind and zero-slope conditions. It was observed that the fire spread rate of the fuel-beds was less than 0.5 m x min(-1). Fuel-bed loading, height, and moisture contents all had significant effects on the fire spread rate. The effect of fuel-bed moisture content on the fire spread had no significant correlations with fuel-bed loading and height, but the effect of fuel-bed height was related to the fuel-bed loading. The packing ratio of fuel-beds had less effect on the fire spread rate. Taking the fuel-bed loading, height, and moisture content as predictive variables, a prediction model for the fire spread rate of Mongolian oak leaves fuel-bed was established, which could explain 83% of the variance of the fire spread rate, with a mean absolute error 0.04 m x min(-1) and a mean relative error less than 17%.

Ultraviolet Radiative Transfer Modeling of Nearby Galaxies with Extraplanar Dusts

NASA Astrophysics Data System (ADS)

Shinn, Jong-Ho; Seon, Kwang-Il

2015-12-01

In order to examine their relation to the host galaxy, the extraplanar dusts of six nearby galaxies are modeled, employing a three-dimensional Monte Carlo radiative transfer code. The targets are from the highly inclined galaxies that show dust-scattered ultraviolet halos, and the archival Galaxy Evolution Explorer FUV band images were fitted with the model. The observed images are generally well-reproduced by two dust layers and one light source layer, whose vertical and radial distributions have exponential profiles. We obtained several important physical parameters, such as star formation rate (SFRUV), face-on optical depth, and scale-heights. Three galaxies (NGC 891, NGC 3628, and UGC 11794) show clear evidence for the existence of an extraplanar dust layer. However, it is found that the remaining three targets (IC 5249, NGC 24, and NGC 4173) do not necessarily need a thick dust disk to model the ultraviolet (UV) halo, because its contribution is too small and the UV halo may be caused by the wing part of the GALEX point spread function. This indicates that the galaxy samples reported to have UV halos may be contaminated by galaxies with negligible extraplanar (halo) dust. The galaxies showing evidence of an extraplanar dust layer fall within a narrow range on the scatter plots between physical parameters such as SFRUV and extraplanar dust mass. Several mechanisms that could possibly produce the extraplanar dust are discussed. We also found a hint that the extraplanar dust scale-height might not be much different from the polycyclic aromatic hydrocarbon emission characteristic height.

Differences in the effectiveness of frontal air bags by body size among adults involved in motor vehicle crashes.

PubMed

Newgard, Craig D; McConnell, K John

2008-10-01

There is concern that small stature occupants (particularly women) involved in motor vehicle crashes (MVCs) may be at risk of injury or death from frontal air bags, though evidence to substantiate this concern is lacking. We sought to assess how occupant body size (measured through height and weight) affects air bag effectiveness in mitigating the risk of serious injury, after adjusting for important crash factors. This was a retrospective cohort study using a national population-based cohort of adult front-seat occupants involved in MVCs as included in the National Automotive Sampling System Crashworthiness Data System database (NASS CDS) from 1995 to 2006. Drivers and front-seat passengers 15 years and older involved in MVCs involving passenger vehicles and light trucks were included in the analysis. The primary outcome was serious injury, defined as an Abbreviated Injury Scale (AIS) score >or=3 in any body region. Multivariable logistic regression models were used to test interaction terms (effect modification) between air bags, body size, and injury. The predicted probability of injury across body sizes was plotted to further illustrate potential differences. Sixty-nine thousand three hundred eighty-seven adult front-seat occupants during the 12-year period were included in the analysis, of which 9333 (2.3%) were seriously injured. There was no evidence that height or weight modified air bag effectiveness among all crashes (p > .40). In primary frontal collisions, there was some evidence for effect modification by weight (p = .04) but not by height (p = .59). When assessed using air bag deployment, height was a strong effect modifier (p = .0078), but not weight (p = .43). Predicted probability figures confirmed that occupant height modifies the effect of air bag deployment, but there was no similar visual evidence for body weight. In this sample, we found no consistent evidence that body size modifies the overall effectiveness of frontal air bags. However, among crashes involving air bag deployment, the effect of deployment on injury differs by occupant height, with a relative increase in the odds of serious injury among smaller occupants. In such crashes, the probability of injury with (versus without) deployment began to increase with occupant heights less than 155 cm (5'), reaching a level of statistical difference below 138 cm (4' 6'').

Effectiveness of Combined Tear Film Therapy in Patients with Evaporative Dry Eye with Short Tear Film Breakup Time.

PubMed

Kim, Yung Hui; Kang, Yeon Soo; Lee, Hyo Seok; Choi, Won; You, In Cheon; Yoon, Kyung Chul

2017-10-01

The aim of this study was to evaluate the effectiveness of combined tear film therapy targeted to aqueous, mucin, and lipid layers in patients with refractory evaporative dry eye (EDE) with short tear film breakup time (TBUT). The patients who had EDE with short TBUT and severe symptoms refractory to artificial tears were treated with hyaluronic acid (HA) 0.15% and diquafosol tetrasodium (DQS) 3% (Group 1), HA and carbomer-based lipid-containing eyedrops (Liposic EDO Gel, LPO) (Group 2), or HA, DQS, and LPO (Group 3). Ocular Surface Disease Index (OSDI) score, visual analog scale (VAS) symptom score, TBUT, Schirmer score, and corneal and conjunctival staining scores were evaluated, and noninvasive tear film breakup time (NIBUT) and tear meniscus height were measured using Keratograph ® 5 M before and 1 and 3 months after treatment. OSDI scores, VAS scores, TBUT, and NIBUT were improved at 1 and 3 months after treatment in all groups (all P < 0.05). At each follow-up visit, the total OSDI, OSDI symptom, and all VAS scores were significantly lower in group 3 compared with groups 1 and 2 (all P < 0.05). In addition, TBUT and NIBUT were significantly higher in group 3 compared with groups 1 and 2 (all P < 0.05). No significant adverse effects were noted in the groups during treatment. Mucin or lipid-targeting agents combined with aqueous supplements in patients with refractory EDE with short TBUT might improve subjective symptoms and TBUT. Of this, targeting whole tear film layers was most effective in improving ocular symptoms and tear film quality.

Genetic short stature.

PubMed

Grunauer, Michelle; Jorge, Alexander A L

2018-02-01

Adult height and growth patterns are largely genetically programmed. Studies in twins have indicated that the heritability of height is high (>80%), suggesting that genetic variation is the main determinant of stature. Height exhibits a normal (Gaussian) distribution according to sex, age, and ancestry. Short stature is usually defined as a height which is 2 standard deviations (S.D.) less than the mean height of a specific population. This definition includes 2.3% of the population and usually includes healthy individuals. In this group of short stature non-syndromic conditions, the genetic influence occurs polygenically or oligogenically. As a rule, each common genetic variant accounts for a small effect (1mm) on individual height variation. Recently, several studies demonstrated that some rare variants can cause greater effect on height, without causing a syndromic condition. In more extreme cases, height SDS below 2.5 or 3 (which would comprise approximately 0.6 and 0.1% of the population, respectively) is frequently associated with syndromic conditions and are usually caused by a monogenic defect. More than 1,000 inherited/genetic diseases have growth disorder as an important phenotype. These conditions are usually responsible for syndromic short stature. In the coming years, we expect to discover several genetic causes of short stature, thereby explaining the phenotype of what we currently classify as short stature of unknown cause. These discoveries will have a profound impact on the follow-up and treatment of these children. Copyright © 2017 Elsevier Ltd. All rights reserved.

Vertebral reconstruction using the telescopic plate spacer-thoracolumbar (TPS-TL) device.

PubMed

Atalay, Basar; Riesenburger, Ron I; Schirmer, Clemens M; Bhadelia, Rafeeque A; Weller, Simcha J

2010-07-01

Retrospective study of surgical technique and outcome. The authors conducted a study to evaluate the ability of the TPS-TL (telescopic plate spacer-thoracolumbar) implant to correct kyphotic deformity and restore vertebral body height after vertebrectomy in the thoracolumbar spine. TPS-TL is a novel vertebral body replacement device that consists of an expandable cage with an integrated plate component for transvertebral screw fixation. This is a retrospective study of 20 patients who underwent anterior column reconstruction with TPS-TL after a 1 or 2 level thoracolumbar vertebrectomy. Preoperative and postoperative sagittal alignment and vertebral body heights were radiologically analyzed in all patients. The mean follow-up was 14 months. Preoperative and postoperative Cobb angles were measured to assess sagittal alignment. The average preoperative Cobb angle was 16.0 + or - 7 degrees. This was reduced to 9.8 + or - 10 degrees at the final follow-up (P<0.001). Percent of ideal vertebral body height was used to assess postoperative restoration of vertebral body height. This value was obtained by creating a ratio of the height of the effected vertebral levels to the height of the adjacent normal vertebral bodies. The mean percent of ideal vertebral body height improved from a preoperative value from 86.2 + or - 2% to 93.1 + or - 6% at the final follow-up (P<0.001). The TPS-TL implant is effective in restoring vertebral body height and correcting kyphotic deformity after thoracolumbar vertebrectomy.

Correlation among body height, intelligence, and brain gray matter volume in healthy children.

PubMed

Taki, Yasuyuki; Hashizume, Hiroshi; Sassa, Yuko; Takeuchi, Hikaru; Asano, Michiko; Asano, Kohei; Kotozaki, Yuka; Nouchi, Rui; Wu, Kai; Fukuda, Hiroshi; Kawashima, Ryuta

2012-01-16

A significant positive correlation between height and intelligence has been demonstrated in children. Additionally, intelligence has been associated with the volume of gray matter in the brains of children. Based on these correlations, we analyzed the correlation among height, full-scale intelligence quotient (IQ) and gray matter volume applying voxel-based morphometry using data from the brain magnetic resonance images of 160 healthy children aged 5-18 years of age. As a result, body height was significantly positively correlated with brain gray matter volume. Additionally, the regional gray matter volume of several regions such as the bilateral prefrontal cortices, temporoparietal region, and cerebellum was significantly positively correlated with body height and that the gray matter volume of several of these regions was also significantly positively correlated with full-scale intelligence quotient (IQ) scores after adjusting for age, sex, and socioeconomic status. Our results demonstrate that gray and white matter volume may mediate the correlation between body height and intelligence in healthy children. Additionally, the correlations among gray and white matter volume, height, and intelligence may be at least partially explained by the effect of insulin-like growth factor-1 and growth hormones. Given the importance of the effect of environmental factors, especially nutrition, on height, IQ, and gray matter volume, the present results stress the importance of nutrition during childhood for the healthy maturation of body and brain. Copyright © 2011 Elsevier Inc. All rights reserved.

Examining action effects in the execution of a skilled soccer kick by using erroneous feedback.

PubMed

Ford, Paul; Hodges, Nicola J; Williams, A Mark

2007-11-01

The authors examined the role of action effects (i.e., ball trajectory) during the performance of a soccer kick. Participants were 20 expert players who kicked a ball over a height barrier toward a ground-level target. The authors occluded participants' vision of the ball trajectory after foot-to-ball contact. Participants in a 1st group received erroneous feedback from a video that showed a ball-trajectory apex approximately 75 cm lower than that of their actual kick, although the ball's landing position was unaltered. Participants in a 2nd group received correct video feedback of both the ball trajectory and the landing position. The erroneous-feedback group showed a significant bias toward higher ball trajectories than did the correct-feedback group. The authors conclude that performers at high levels of skill use the visual consequences of the action to plan and execute an action.

Effects of shoe inserts and heel height on foot pressure, impact force, and perceived comfort during walking.

PubMed

Yung-Hui, Lee; Wei-Hsien, Hong

2005-05-01

Studying the impact of high-heeled shoes on kinetic changes and perceived discomfort provides a basis to advance the design and minimize the adverse effects on the human musculoskeletal system. Previous studies demonstrated the effects of inserts on kinetics and perceived comfort in flat or running shoes. No study attempted to investigate the effectiveness of inserts in high heel shoes. The purpose of this study was to determine whether increasing heel height and the use of shoe inserts change foot pressure distribution, impact force, and perceived comfort during walking. Ten healthy females volunteered for the study. The heel heights were 1.0cm (flat), 5.1cm (low), and 7.6cm (high). The heel height effects were examined across five shoe-insert conditions of shoe only; heel cup, arch support, metatarsal pad, and total contact insert (TCI). The results indicated that increasing heel height increases impact force (p<0.01), medial forefoot pressure (p<0.01), and perceived discomfort (p<0.01) during walking. A heel cup insert for high-heeled shoes effectively reduced the heel pressure and impact force (p<0.01), an arch support insert reduced the medial forefoot pressure, and both improved footwear comfort (p<0.01). In particular, a TCI reduced heel pressure by 25% and medial forefoot pressure by 24%, attenuate the impact force by 33.2%, and offered higher perceived comfort when compared to the non-insert condition.

Assessment of Satellite Albedos Using NASA-CAR Airborne Data

NASA Astrophysics Data System (ADS)

Kharbouche, S.; Charles, G.; Muller, J. P.

2016-12-01

Airborne BRF (Bidirectional Reflectance Factor) data has been acquired at multiple altitudes by the NASA CAR (Cloud Absorption Radiometer) multi-spectral instrument since the late 1990s in order to study the reflectance over different types of landscapes depending upon wavelengths, view angles and spatial scales, and to assess derived BRFs from multispectral satellites. As the measured BRFs are taken over a very short period (< 2 minutes), we minimise the effects of solar angles and atmospheric effects. This allows the derivation of a dense set of BRFs which allow direct display of polar plots of the BRDF for different sites in the Arctic. Also, as the measurements have been taken at different flight heights, the upscaling issue can be addressed and detailed with concrete samples. The CAR instrument is well calibrated (back to NIST standards) and can be compared with some ground measurements on the ground. So the derived BRF data for this instrument are likely to be highly reliable and can be used in the validation of some satellites products like radiance, reflectance and albedo, as well as in the BRDF (Bidirectional Reflectance Distribution Function) modelling and in the development of new atmospheric correction techniques. The NASA-CAR, developed by NASA-GSFC can be carried and integrated into many experimental aircraft. So, CAR can be considered as an airborne multi-wavelength scanning radiometer that can measure radiance with instantaneous fields of view of 1°. Over targeted sites, the CAR flies circularly and scans through 180° from straight above, through the horizon to straight down. Data are recorded in 14 narrow spectral bands located in the ultraviolet, visible and near-infrared regions in the electromagnetic spectrum (0.340-2.301 mm). The ray or spot at nadir depends on the flight height. It varies from 1m (height=110m) to 48m (height=5500m). We will show in this presentation the accuracy of BRF, BRDF and Black-Sky-Albedo of MODIS, MISR, MERIS, VGT, Landsat-7 and AVHRR, over vegetated, non-vegetated and ice-covered sites. We will show also how CAR data are arranged and how can be read and deployed. This work was supported by QA4ECV, a project of European Union's Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 607405

16 CFR 1509.9 - Mattresses.

Code of Federal Regulations, 2010 CFR

2010-01-01

... effective crib-side height dimension of at least 50.8 centimeters (20 inches) as measured from the upper... effective crib-side height dimension of at least 7.6 centimeters (3 inches) as measured from the upper... position. (b) Mattress dimensions. The dimensions of a mattress supplied with a non-full-size baby crib...

16 CFR 1509.9 - Mattresses.

Code of Federal Regulations, 2011 CFR

2011-01-01

... effective crib-side height dimension of at least 50.8 centimeters (20 inches) as measured from the upper... effective crib-side height dimension of at least 7.6 centimeters (3 inches) as measured from the upper... position. (b) Mattress dimensions. The dimensions of a mattress supplied with a non-full-size baby crib...

Effects of Isometric Scaling on Vertical Jumping Performance

PubMed Central

Bobbert, Maarten F.

2013-01-01

Jump height, defined as vertical displacement in the airborne phase, depends on vertical takeoff velocity. For centuries, researchers have speculated on how jump height is affected by body size and many have adhered to what has come to be known as Borelli’s law, which states that jump height does not depend on body size per se. The underlying assumption is that the amount of work produced per kg body mass during the push-off is independent of size. However, if a big body is isometrically downscaled to a small body, the latter requires higher joint angular velocities to achieve a given takeoff velocity and work production will be more impaired by the force-velocity relationship of muscle. In the present study, the effects of pure isometric scaling on vertical jumping performance were investigated using a biologically realistic model of the human musculoskeletal system. The input of the model, muscle stimulation over time, was optimized using jump height as criterion. It was found that when the human model was miniaturized to the size of a mouse lemur, with a mass of about one-thousandth that of a human, jump height dropped from 40 cm to only 6 cm, mainly because of the force-velocity relationship. In reality, mouse lemurs achieve jump heights of about 33 cm. By implication, the unfavourable effects of the small body size of mouse lemurs on jumping performance must be counteracted by favourable effects of morphological and physiological adaptations. The same holds true for other small jumping animals. The simulations for the first time expose and explain the sheer magnitude of the isolated effects of isometric downscaling on jumping performance, to be counteracted by morphological and physiological adaptations. PMID:23936494

Summer effects on body mass index (BMI) gain and growth patterns of American Indian children from kindergarten to first grade: a prospective study

PubMed Central

2011-01-01

Background Overweight and obesity are highly prevalent among American Indian children, especially those living on reservations. There is little scientific evidence about the effects of summer vacation on obesity development in children. The purpose of this study was to investigate the effects of summer vacation between kindergarten and first grade on growth in height, weight, and body mass index (BMI) for a sample of American Indian children. Methods Children had their height and weight measured in four rounds of data collection (yielded three intervals: kindergarten, summer vacation, and first grade) as part of a school-based obesity prevention trial (Bright Start) in a Northern Plains Indian Reservation. Demographic variables were collected at baseline from parent surveys. Growth velocities (Z-score units/year) for BMI, weight, and height were estimated and compared for each interval using generalized linear mixed models. Results The children were taller and heavier than median of same age counterparts. Height Z-scores were positively associated with increasing weight status category. The mean weight velocity during summer was significantly less than during the school year. More rapid growth velocity in height during summer than during school year was observed. Obese children gained less adjusted-BMI in the first grade after gaining more than their counterparts during the previous two intervals. No statistically significant interval effects were found for height and BMI velocities. Conclusions There was no indication of a significant summer effect on children's BMI. Rather than seasonal or school-related patterns, the predominant pattern indicated by weight-Z and BMI-Z velocities might be related to age or maturation. Trial registration Bright Start: Obesity Prevention in American Indian Children Clinical Trial Govt ID# NCT00123032 PMID:22192795

Integrated Target Acquisition and Fire Control Systems: Avionics Panel Symposium Held in Ottawa, Canada on 7-10 October 1991 (Systemes Integres d’Acquisition d’Objectifs et de Conduite de Tir)

DTIC Science & Technology

1992-02-01

Designation with the CL-227 Sea Sentinel 31 byH SotadS.Joes SESSION V - LONGER TERM SYSTEMS Avionic System Improvement Proposal for the TORNADO...18’s fire control capability to deliver some types of smart munitions. Yet we also noted that while we lacked the target designators and control...source of lines came qystems designed to deny the information about the tactical enemy the use of height. Sophisticated situation they are facing. Enemy

Collar height and heel counter-stiffness for ankle stability and athletic performance in basketball.

PubMed

Liu, Hui; Wu, Zitian; Lam, Wing-Kai

2017-01-01

This study examined the effects of collar height and heel counter-stiffness of basketball shoes on ankle stability during sidestep cutting and athletic performance. 15 university basketball players wore customized shoes with different collar heights (high and low) and heel counter-stiffness (regular, stiffer and stiffest) for this study. Ankle stability was evaluated in sidestep cutting while athletic performance evaluated in jumping and agility tasks. All variables were analysed using two-way repeated ANOVA. Results showed shorter time to peak ankle inversion for both high collar and stiff heel counter conditions (P < 0.05), while smaller initial ankle inversion angle, peak inversion velocity and total range of inversion for wearing high collar shoes (P < 0.05). No shoe differences were found for performance variables. These findings imply that the collar height might play a larger role in lateral stability than heel counter-stiffness, while both collar height and counter-stiffness have no effect on athletic performance.

On the reduction of splash-back

NASA Astrophysics Data System (ADS)

Dickerson, Andrew; Stephen, Jeremy

2017-11-01

The reduction of splash height following the impact of a solid body on a liquid surface is relevant to multiple sectors including military missile entry, industrial processing, and visits to public restrooms. While most studies have viewed splashes in the context of control of impactor shape and surface properties, we here consider the effects of splash height following modification of a liquid surface by surfactants and thin fabrics. Smooth, hydrophilic, free-falling spheres are allowed to impact a quiescent liquid surface of modified surface conditions while filmed with a high-speed camera. We measure splash heights and cavity depths formed by impacting spheres across Froude numbers 3 - 6.5. As expected, lowering the surface tension of the liquid increased splash height with respect to pure water. The introduction of fabric to the surface has an more unpredictable effect. With respect to unaltered impact conditions, ample inclusion of fabric on the surface reduces splash height, while a meager amount of fabric amplifies splashing due to the augmentation of cavity formation preceding a Worthington jet.

Working height, block mass and one- vs. two-handed block handling: the contribution to low back and shoulder loading during masonry work.

PubMed

Faber, G S; Kingma, I; Kuijer, P P F M; van der Molen, H F; Hoozemans, M J M; Frings-Dresen, M H W; van Dieën, J H

2009-09-01

The goal of this study was to compare the effects of the task variables block mass, working height and one- vs. two-handed block handling on low back and shoulder loading during masonry work. In a mock-up of a masonry work site, nine masonry workers performed one- and two-handed block-lifting and block-placing tasks at varying heights (ranging from floor to shoulder level) with blocks of varying mass (ranging from 6 to 16 kg). Kinematics and ground reaction forces were measured and used in a 3-D linked segment model to calculate low back and shoulder loading. Increasing lifting height appeared to be the most effective way to reduce low back loading. However, working at shoulder level resulted in relatively high shoulder loading. Therefore, it was recommended to organise masonry work in such a way that blocks are handled with the hands at about iliac crest height as much as possible.

Anthropometric study with emphasis on hand and foot measurements in the Prader-Willi syndrome: sex, age and chromosome effects.

PubMed

Butler, M G; Haynes, J L; Meaney, F J

1991-01-01

Age, sex and chromosome effects on weight, height, sitting height, three head dimensions, and five hand and three foot measurements were analyzed from 57 patients (35 males and 22 females) with the Prader-Willi syndrome (PWS). No significant differences were observed in anthropometric data between PWS patients with the 15q chromosome deletion and those with normal chromosomes. Preschool children were found to have dolichocephaly, while hand and foot measurements, stature and sitting height were within normal range, although foot size was smaller than hand size in females when compared with PWS males. However, anthropometric measurements, excluding weight, head length and ankle breadth, were less than -2 SD in adult patients. Abnormal growth patterns apparently exist with significant negative correlations with age, particularly in PWS males, for height, sitting height, head circumference, and hand and foot measurements, but a significant positive correlation for weight was found in patients below 10 years of age.

Compliance control for a hydraulic bouncing system.

PubMed

Chen, Guangrong; Wang, Junzheng; Wang, Shoukun; Zhao, Jiangbo; Shen, Wei

2018-05-17

This paper is to reduce the contact impact, control the leg stiffness and bouncing height. Firstly, the combining position/force active compliance control was involved in the deceleration phase to decrease the impact force and improve the leg compliance capacity. Then a reasonable velocity control of cylinder was addressed to control the bouncing height to the given value in the acceleration phase. Due to the model uncertainties and disturbances in the deceleration and acceleration phase, a near inverse like controller with a proportional and differential control (PD) was added into the velocity control of acceleration phase to compensate the bouncing height control error. Finally, the effectiveness of proposed controller was validated by experiments. Experimental results showed the impact force could be reduced effectively and a significant bouncing height control performance could be achieved. The influences of initial energy, preload of spring and velocity of cylinder on the bouncing height were addressed as well. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

The Effects of Shoe Traction and Obstacle Height on Lower Extremity Coordination Dynamics during Walking

PubMed Central

Decker, Leslie; Houser, Jeremy J.; Noble, John M.; Karst, Gregory M.; Stergiou, Nicholas

2009-01-01

This study aims to investigate the effects of shoe traction and obstacle height on lower extremity relative phase dynamics (analysis of intralimb coordination) during walking to better understand the mechanisms employed to avoid slippage following obstacle clearance. Ten participants walked at a self-selected pace during eight conditions: four obstacle heights (0%, 10%, 20%, and 40% of limb length) while wearing two pairs of shoes (low and high traction). A coordination analysis was used and phasing relationships between lower extremity segments were examined. The results demonstrated that significant behavioral changes were elicited under varied obstacle heights and frictional conditions. Both decreasing shoe traction and increasing obstacle height resulted in a more in-phase relationship between the interacting lower limb segments. The higher the obstacle and the lower the shoe traction, the more unstable the system became. These changes in phasing relationship and variability are indicators of alterations in coordinative behavior, which if pushed further may have lead to falling. PMID:19187929

Stand level height-diameter mixed effects models: parameters fitted using loblolly pine but calibrated for sweetgum

Treesearch

Curtis L. Vanderschaaf

2008-01-01

Mixed effects models can be used to obtain site-specific parameters through the use of model calibration that often produces better predictions of independent data. This study examined whether parameters of a mixed effect height-diameter model estimated using loblolly pine plantation data but calibrated using sweetgum plantation data would produce reasonable...

Rare and low-frequency coding variants alter human adult height.

PubMed

Marouli, Eirini; Graff, Mariaelisa; Medina-Gomez, Carolina; Lo, Ken Sin; Wood, Andrew R; Kjaer, Troels R; Fine, Rebecca S; Lu, Yingchang; Schurmann, Claudia; Highland, Heather M; Rüeger, Sina; Thorleifsson, Gudmar; Justice, Anne E; Lamparter, David; Stirrups, Kathleen E; Turcot, Valérie; Young, Kristin L; Winkler, Thomas W; Esko, Tõnu; Karaderi, Tugce; Locke, Adam E; Masca, Nicholas G D; Ng, Maggie C Y; Mudgal, Poorva; Rivas, Manuel A; Vedantam, Sailaja; Mahajan, Anubha; Guo, Xiuqing; Abecasis, Goncalo; Aben, Katja K; Adair, Linda S; Alam, Dewan S; Albrecht, Eva; Allin, Kristine H; Allison, Matthew; Amouyel, Philippe; Appel, Emil V; Arveiler, Dominique; Asselbergs, Folkert W; Auer, Paul L; Balkau, Beverley; Banas, Bernhard; Bang, Lia E; Benn, Marianne; Bergmann, Sven; Bielak, Lawrence F; Blüher, Matthias; Boeing, Heiner; Boerwinkle, Eric; Böger, Carsten A; Bonnycastle, Lori L; Bork-Jensen, Jette; Bots, Michiel L; Bottinger, Erwin P; Bowden, Donald W; Brandslund, Ivan; Breen, Gerome; Brilliant, Murray H; Broer, Linda; Burt, Amber A; Butterworth, Adam S; Carey, David J; Caulfield, Mark J; Chambers, John C; Chasman, Daniel I; Chen, Yii-Der Ida; Chowdhury, Rajiv; Christensen, Cramer; Chu, Audrey Y; Cocca, Massimiliano; Collins, Francis S; Cook, James P; Corley, Janie; Galbany, Jordi Corominas; Cox, Amanda J; Cuellar-Partida, Gabriel; Danesh, John; Davies, Gail; de Bakker, Paul I W; de Borst, Gert J; de Denus, Simon; de Groot, Mark C H; de Mutsert, Renée; Deary, Ian J; Dedoussis, George; Demerath, Ellen W; den Hollander, Anneke I; Dennis, Joe G; Di Angelantonio, Emanuele; Drenos, Fotios; Du, Mengmeng; Dunning, Alison M; Easton, Douglas F; Ebeling, Tapani; Edwards, Todd L; Ellinor, Patrick T; Elliott, Paul; Evangelou, Evangelos; Farmaki, Aliki-Eleni; Faul, Jessica D; Feitosa, Mary F; Feng, Shuang; Ferrannini, Ele; Ferrario, Marco M; Ferrieres, Jean; Florez, Jose C; Ford, Ian; Fornage, Myriam; Franks, Paul W; Frikke-Schmidt, Ruth; Galesloot, Tessel E; Gan, Wei; Gandin, Ilaria; Gasparini, Paolo; Giedraitis, Vilmantas; Giri, Ayush; Girotto, Giorgia; Gordon, Scott D; Gordon-Larsen, Penny; Gorski, Mathias; Grarup, Niels; Grove, Megan L; Gudnason, Vilmundur; Gustafsson, Stefan; Hansen, Torben; Harris, Kathleen Mullan; Harris, Tamara B; Hattersley, Andrew T; Hayward, Caroline; He, Liang; Heid, Iris M; Heikkilä, Kauko; Helgeland, Øyvind; Hernesniemi, Jussi; Hewitt, Alex W; Hocking, Lynne J; Hollensted, Mette; Holmen, Oddgeir L; Hovingh, G Kees; Howson, Joanna M M; Hoyng, Carel B; Huang, Paul L; Hveem, Kristian; Ikram, M Arfan; Ingelsson, Erik; Jackson, Anne U; Jansson, Jan-Håkan; Jarvik, Gail P; Jensen, Gorm B; Jhun, Min A; Jia, Yucheng; Jiang, Xuejuan; Johansson, Stefan; Jørgensen, Marit E; Jørgensen, Torben; Jousilahti, Pekka; Jukema, J Wouter; Kahali, Bratati; Kahn, René S; Kähönen, Mika; Kamstrup, Pia R; Kanoni, Stavroula; Kaprio, Jaakko; Karaleftheri, Maria; Kardia, Sharon L R; Karpe, Fredrik; Kee, Frank; Keeman, Renske; Kiemeney, Lambertus A; Kitajima, Hidetoshi; Kluivers, Kirsten B; Kocher, Thomas; Komulainen, Pirjo; Kontto, Jukka; Kooner, Jaspal S; Kooperberg, Charles; Kovacs, Peter; Kriebel, Jennifer; Kuivaniemi, Helena; Küry, Sébastien; Kuusisto, Johanna; La Bianca, Martina; Laakso, Markku; Lakka, Timo A; Lange, Ethan M; Lange, Leslie A; Langefeld, Carl D; Langenberg, Claudia; Larson, Eric B; Lee, I-Te; Lehtimäki, Terho; Lewis, Cora E; Li, Huaixing; Li, Jin; Li-Gao, Ruifang; Lin, Honghuang; Lin, Li-An; Lin, Xu; Lind, Lars; Lindström, Jaana; Linneberg, Allan; Liu, Yeheng; Liu, Yongmei; Lophatananon, Artitaya; Luan, Jian'an; Lubitz, Steven A; Lyytikäinen, Leo-Pekka; Mackey, David A; Madden, Pamela A F; Manning, Alisa K; Männistö, Satu; Marenne, Gaëlle; Marten, Jonathan; Martin, Nicholas G; Mazul, Angela L; Meidtner, Karina; Metspalu, Andres; Mitchell, Paul; Mohlke, Karen L; Mook-Kanamori, Dennis O; Morgan, Anna; Morris, Andrew D; Morris, Andrew P; Müller-Nurasyid, Martina; Munroe, Patricia B; Nalls, Mike A; Nauck, Matthias; Nelson, Christopher P; Neville, Matt; Nielsen, Sune F; Nikus, Kjell; Njølstad, Pål R; Nordestgaard, Børge G; Ntalla, Ioanna; O'Connel, Jeffrey R; Oksa, Heikki; Loohuis, Loes M Olde; Ophoff, Roel A; Owen, Katharine R; Packard, Chris J; Padmanabhan, Sandosh; Palmer, Colin N A; Pasterkamp, Gerard; Patel, Aniruddh P; Pattie, Alison; Pedersen, Oluf; Peissig, Peggy L; Peloso, Gina M; Pennell, Craig E; Perola, Markus; Perry, James A; Perry, John R B; Person, Thomas N; Pirie, Ailith; Polasek, Ozren; Posthuma, Danielle; Raitakari, Olli T; Rasheed, Asif; Rauramaa, Rainer; Reilly, Dermot F; Reiner, Alex P; Renström, Frida; Ridker, Paul M; Rioux, John D; Robertson, Neil; Robino, Antonietta; Rolandsson, Olov; Rudan, Igor; Ruth, Katherine S; Saleheen, Danish; Salomaa, Veikko; Samani, Nilesh J; Sandow, Kevin; Sapkota, Yadav; Sattar, Naveed; Schmidt, Marjanka K; Schreiner, Pamela J; Schulze, Matthias B; Scott, Robert A; Segura-Lepe, Marcelo P; Shah, Svati; Sim, Xueling; Sivapalaratnam, Suthesh; Small, Kerrin S; Smith, Albert Vernon; Smith, Jennifer A; Southam, Lorraine; Spector, Timothy D; Speliotes, Elizabeth K; Starr, John M; Steinthorsdottir, Valgerdur; Stringham, Heather M; Stumvoll, Michael; Surendran, Praveen; 't Hart, Leen M; Tansey, Katherine E; Tardif, Jean-Claude; Taylor, Kent D; Teumer, Alexander; Thompson, Deborah J; Thorsteinsdottir, Unnur; Thuesen, Betina H; Tönjes, Anke; Tromp, Gerard; Trompet, Stella; Tsafantakis, Emmanouil; Tuomilehto, Jaakko; Tybjaerg-Hansen, Anne; Tyrer, Jonathan P; Uher, Rudolf; Uitterlinden, André G; Ulivi, Sheila; van der Laan, Sander W; Van Der Leij, Andries R; van Duijn, Cornelia M; van Schoor, Natasja M; van Setten, Jessica; Varbo, Anette; Varga, Tibor V; Varma, Rohit; Edwards, Digna R Velez; Vermeulen, Sita H; Vestergaard, Henrik; Vitart, Veronique; Vogt, Thomas F; Vozzi, Diego; Walker, Mark; Wang, Feijie; Wang, Carol A; Wang, Shuai; Wang, Yiqin; Wareham, Nicholas J; Warren, Helen R; Wessel, Jennifer; Willems, Sara M; Wilson, James G; Witte, Daniel R; Woods, Michael O; Wu, Ying; Yaghootkar, Hanieh; Yao, Jie; Yao, Pang; Yerges-Armstrong, Laura M; Young, Robin; Zeggini, Eleftheria; Zhan, Xiaowei; Zhang, Weihua; Zhao, Jing Hua; Zhao, Wei; Zhao, Wei; Zheng, He; Zhou, Wei; Rotter, Jerome I; Boehnke, Michael; Kathiresan, Sekar; McCarthy, Mark I; Willer, Cristen J; Stefansson, Kari; Borecki, Ingrid B; Liu, Dajiang J; North, Kari E; Heard-Costa, Nancy L; Pers, Tune H; Lindgren, Cecilia M; Oxvig, Claus; Kutalik, Zoltán; Rivadeneira, Fernando; Loos, Ruth J F; Frayling, Timothy M; Hirschhorn, Joel N; Deloukas, Panos; Lettre, Guillaume

2017-02-09

Height is a highly heritable, classic polygenic trait with approximately 700 common associated variants identified through genome-wide association studies so far. Here, we report 83 height-associated coding variants with lower minor-allele frequencies (in the range of 0.1-4.8%) and effects of up to 2 centimetres per allele (such as those in IHH, STC2, AR and CRISPLD2), greater than ten times the average effect of common variants. In functional follow-up studies, rare height-increasing alleles of STC2 (giving an increase of 1-2 centimetres per allele) compromised proteolytic inhibition of PAPP-A and increased cleavage of IGFBP-4 in vitro, resulting in higher bioavailability of insulin-like growth factors. These 83 height-associated variants overlap genes that are mutated in monogenic growth disorders and highlight new biological candidates (such as ADAMTS3, IL11RA and NOX4) and pathways (such as proteoglycan and glycosaminoglycan synthesis) involved in growth. Our results demonstrate that sufficiently large sample sizes can uncover rare and low-frequency variants of moderate-to-large effect associated with polygenic human phenotypes, and that these variants implicate relevant genes and pathways.

Experimental Studies on Wave Interactions of Partially Perforated Wall under Obliquely Incident Waves

PubMed Central

Lee, Jong-In; Kim, Young-Taek; Shin, Sungwon

2014-01-01

This study presents wave height distribution in terms of stem wave evolution phenomena on partially perforated wall structures through three-dimensional laboratory experiments. The plain and partially perforated walls were tested to understand their effects on the stem wave evolution under the monochromatic and random wave cases with the various wave conditions, incident angle (from 10 to 40 degrees), and configurations of front and side walls. The partially perforated wall reduced the relative wave heights more effectively compared to the plain wall structure. Partially perforated walls with side walls showed a better performance in terms of wave height reduction compared to the structure without the side wall. Moreover, the relative wave heights along the wall were relatively small when the relative chamber width is large, within the range of the chamber width in this study. The wave spectra showed a frequency dependency of the wave energy dissipation. In most cases, the existence of side wall is a more important factor than the porosity of the front wall in terms of the wave height reduction even if the partially perforated wall was still effective compared to the plain wall. PMID:25254260

Experimental studies on wave interactions of partially perforated wall under obliquely incident waves.

PubMed

Lee, Jong-In; Kim, Young-Taek; Shin, Sungwon

2014-01-01

This study presents wave height distribution in terms of stem wave evolution phenomena on partially perforated wall structures through three-dimensional laboratory experiments. The plain and partially perforated walls were tested to understand their effects on the stem wave evolution under the monochromatic and random wave cases with the various wave conditions, incident angle (from 10 to 40 degrees), and configurations of front and side walls. The partially perforated wall reduced the relative wave heights more effectively compared to the plain wall structure. Partially perforated walls with side walls showed a better performance in terms of wave height reduction compared to the structure without the side wall. Moreover, the relative wave heights along the wall were relatively small when the relative chamber width is large, within the range of the chamber width in this study. The wave spectra showed a frequency dependency of the wave energy dissipation. In most cases, the existence of side wall is a more important factor than the porosity of the front wall in terms of the wave height reduction even if the partially perforated wall was still effective compared to the plain wall.

External electric field effects on Schottky barrier at Gd3N@C80/Au interface

NASA Astrophysics Data System (ADS)

Onishi, Koichi; Nakashima, Fumihiro; Jin, Ge; Eto, Daichi; Hattori, Hayami; Miyoshi, Noriko; Kirimoto, Kenta; Sun, Yong

2017-08-01

The effects of the external electric field on the height of the Schottky barrier at the Gd3N@C80/Au interface were studied by measuring current-voltage characteristics at various temperatures from 200 K to 450 K. The Gd3N@C80 sample with the conduction/forbidden/valence energy band structure had a face-centered cubic crystal structure with the average grain size of several nanometers. The height of the Gd3N@C80/Au Schottky barrier was confirmed to be 400 meV at a low electric field at room temperature. Moreover, the height decreases with the increasing external electric field through a change of permittivity in the Gd3N@C80 sample due to a polarization of the [Gd3] 9 +-[N3 -+("separators="|C80 ) 6 -] dipoles in the Gd3N@C80 molecule. The field-dependence of the barrier height can be described using a power math function of the electric field strength. The results of the field-dependent barrier height indicate that the reduction in the Schottky barrier is due to an image force effect of the transport charge carrier at the Gd3N@C80/Au interface.

Influence of Knee-to-Feet Jump Training on Vertical Jump and Hang Clean Performance.

PubMed

Stark, Laura; Pickett, Karla; Bird, Michael; King, Adam C

2016-11-01

Stark, L, Pickett, K, Bird, M, and King, AC. Influence of knee-to-feet jump training on vertical jump and hang clean performance. J Strength Cond Res 30(11): 3084-3089, 2016-From a motor learning perspective, the practice/training environment can result in positive, negative, or neutral transfer to the testing conditions. The purpose of this study was to examine the training effect of a novel movement (knee-to-feet [K2F] jumps) and whether a 6-week training program induced a positive transfer effect to other power-related movements (vertical jump and hang clean [HC]). Twenty-six intercollegiate athletes from power-emphasized sports were paired and counter-balanced into a control (i.e., maintained their respective sport-specific lifting regimen) or an experimental group (i.e., completed a 6-week progressive training program of K2F jumps in addition to respective lifting regimen). A pre- and posttest design was used to investigate the effect of training on K2F jump height and transfer effect to vertical jump height (VJH) and 2-repetition maximum (RM) HC performance. A significant increase in K2F jump height was found for the experimental group. Vertical jump height significantly increased from pre- to posttest but no group or interaction (group × time) effect was found, and there were nonsignificant differences for HC. Posttest data showed significant correlations between all pairs of the selected exercises with the highest correlation between K2F jump height and VJ H (R = 0.40) followed by VJH and 2RM HC (R = 0.38) and 2RM HC and K2F jump height (R = 0.23). The results suggest that K2F jump training induced the desired learning effect but was specific to the movement in that no effect of transfer occurred to the other power-related movements. This finding is value for strength and condition professionals who design training programs to enhance athletic performance.

Effects of Shallow Water Tables on Height Growth and Phosphorus Uptake by Loblolly and Slash Pines

Treesearch

A.E. Tiarks; E. Shoulders

1982-01-01

In southern Mississippi, the heights of loblolly and slash pines at age 20 were positively correlated with the phosphorus content of the foliage and with depth in the soil to gray (chromas £2) mottles. Slash pine was taller than loblolly at equivalent levels of foliage phosphorus, but the rate of height increase as...

Herbaceous stubble height as a warning of impending cattle grazing damage to riparian areas.

Treesearch

Frederick C. Hall; Larry Bryant

1995-01-01

Prevention of damage to riparian areas from cattle grazing is essential for sound watershed management. Various stubble heights of the most palatable species are used to predict when unacceptable impacts-heavy use or trampling, or both-are about to occur. Managers can observe stubble height and usage and recommend moving the cattle if undesirable effects from continued...

Pelvic rotation torque during fast-pitch softball hitting under three ball height conditions.

PubMed

Iino, Yoichi; Fukushima, Atsushi; Kojima, Takeji

2014-08-01

The purpose of this study was to investigate the relevance of hip joint angles to the production of the pelvic rotation torque in fast-pitch softball hitting and to examine the effect of ball height on this production. Thirteen advanced female softball players hit stationary balls at three different heights: high, middle, and low. The pelvic rotation torque, defined as the torque acting on the pelvis through the hip joints about the pelvic superior-inferior axis, was determined from the kinematic and force plate data using inverse dynamics. Irrespective of the ball heights, the rear hip extension, rear hip external rotation, front hip adduction, and front hip flexion torques contributed to the production of pelvic rotation torque. Although the contributions of the adduction and external rotation torques at each hip joint were significantly different among the ball heights, the contributions of the front and rear hip joint torques were similar among the three ball heights owing to cancelation of the two torque components. The timings of the peaks of the hip joint torque components were significantly different, suggesting that softball hitters may need to adjust the timings of the torque exertions fairly precisely to rotate the upper body effectively.

The Effect of Arch Height and Material Hardness of Personalized Insole on Correction and Tissues of Flatfoot.

PubMed

Su, Shonglun; Mo, Zhongjun; Guo, Junchao; Fan, Yubo

2017-01-01

Flat foot is one of the common deformities in the youth population, seriously affecting the weight supporting and daily exercising. However, there is lacking of quantitative data relative to material selection and shape design of the personalized orthopedic insole. This study was to evaluate the biomechanical effects of material hardness and support height of personalized orthopedic insole on foot tissues, by in vivo experiment and finite element modeling. The correction of arch height increased with material hardness and support height. The peak plantar pressure increased with the material hardness, and these values by wearing insoles of 40° were apparently higher than the bare feet condition. Harder insole material results in higher stress in the joint and ligament stress than softer material. In the calcaneocuboid joint, the stress increased with the arch height of insoles. The material hardness did not apparently affect the stress in the ankle joints, but the support heights of insole did. In general, insole material and support design are positively affecting the correction of orthopedic insole, but negatively resulting in unreasonable stress on the stress in the joint and ligaments. There should be an integration of improving correction and reducing stress in foot tissues.

Systematic review: height-adjustable workstations to reduce sedentary behaviour in office-based workers.

PubMed

Tew, G A; Posso, M C; Arundel, C E; McDaid, C M

2015-07-01

Time spent sitting in the workplace is an important contributor to overall sedentary risk. Installation of height-adjustable workstations has been proposed as a feasible approach for reducing occupational sitting time in office workers. To provide an accurate overview of the controlled trials that have evaluated the effects of height-adjustable workstation interventions on workplace sitting time in office-based workers. A comprehensive search was conducted up until March 2014 in the following databases: Medline, PsychINFO, CENTRAL, EMBASE and PEDro. To identify unpublished studies and grey literature, the reference lists of relevant official or scientific web pages were also checked. Studies assessing the effectiveness of height-adjustable workstations using a randomized or non-randomized controlled design were included. The initial search yielded a total of 8497 citations. After a thorough selection process, five studies were included with 172 participants. A formal quality assessment indicated that risk of bias was high in all studies and heterogeneity in interventions and outcomes prevented meta-analysis. Nevertheless, all studies reported that height-adjustable workstation interventions reduced occupational sitting time in office workers. There was insufficient evidence to determine effects on other relevant health outcomes (e.g. body composition, musculoskeletal symptoms, mental health). There is insufficient evidence to make firm conclusions regarding the effects of installing height-adjustable workstations on sedentary behaviour and associated health outcomes in office workers. Larger and longer term controlled studies are needed, which include more representative populations. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Lactose Intolerance: Lack of Evidence for Short Stature or Vitamin D Deficiency in Prepubertal Children

PubMed Central

Setty-Shah, Nithya; Maranda, Louise; Candela, Ninfa; Fong, Jay; Dahod, Idris; Rogol, Alan D.; Nwosu, Benjamin Udoka

2013-01-01

ABSTRACT Background The health consequences of lactose intolerance (LI) are unclear. Aims To investigate the effects of LI on stature and vitamin D status. Hypotheses LI subjects will have similar heights and vitamin D status as controls. Subjects and Methods Prepubertal children of ages 3-12 years with LI (n=38, age 8.61 ± 3.08y, male/female 19/19) were compared to healthy, age- and gender-matched controls (n=49, age 7.95±2.64, male/female 28/21). Inclusion criteria: prepubertal status (boys: testicular volume <3cc; girls: Tanner 1 breasts), diagnosis of LI by hydrogen breath test, and no history of calcium or vitamin D supplementation. Vitamin D deficiency was defined as 25-hydroxyvitamin D [25(OH)D] <50 nmol/L. Gender-adjusted midparental target height (MPTH) z-score was calculated using NCHS data for 18 year-old adults. Data were expressed as mean ± SD. Results There was no significant difference in 25(OH)D between the LI and non-LI subjects (60.1±21.1, vs. 65.4 ± 26.1 nmol/L, p = 0.29). Upon stratification into normal weight (BMI <85th percentile) vs. overweight/obese (BMI ≥85th percentile), the normal weight controls had significantly higher 25(OH)D level than both the normal weight LI children (78.3 ± 32.6 vs. 62.9 ± 23.2, p = 0.025), and the overweight/obese LI children (78.3±32.6 vs. 55.3±16.5, p = 0.004). Secondly, there was no overall difference in height z-score between the LI children and controls. The normal weight LI patients had similar height as normal controls (-0.46 ± 0.89 vs. -0.71 ± 1.67, p = 0.53), while the overweight/obese LI group was taller than the normal weight controls (0.36 ± 1.41 vs. -0.71 ± 1.67, p = 0.049), and of similar height as the overweight/obese controls (0.36 ± 1.41 vs. 0.87 ± 1.45, p = 0.28). MPTH z-score was similar between the groups. Conclusion Short stature and vitamin D deficiency are not features of LI in prepubertal children. PMID:24205288

Consistency evaluation of values of weight, height, and body mass index in Food Intake and Physical Activity of School Children: the quality control of data entry in the computerized system.

PubMed

Jesus, Gilmar Mercês de; Assis, Maria Alice Altenburg de; Kupek, Emil; Dias, Lizziane Andrade

2017-01-01

The quality control of data entry in computerized questionnaires is an important step in the validation of new instruments. The study assessed the consistency of recorded weight and height on the Food Intake and Physical Activity of School Children (Web-CAAFE) between repeated measures and against directly measured data. Students from the 2nd to the 5th grade (n = 390) had their weight and height directly measured and then filled out the Web-CAAFE. A subsample (n = 92) filled out the Web-CAAFE twice, three hours apart. The analysis included hierarchical linear regression, mixed linear regression model, to evaluate the bias, and intraclass correlation coefficient (ICC), to assess consistency. Univariate linear regression assessed the effect of gender, reading/writing performance, and computer/internet use and possession on residuals of fixed and random effects. The Web-CAAFE showed high values of ICC between repeated measures (body weight = 0.996, height = 0.937, body mass index - BMI = 0.972), and regarding the checked measures (body weight = 0.962, height = 0.882, BMI = 0.828). The difference between means of body weight, height, and BMI directly measured and recorded was 208 g, -2 mm, and 0.238 kg/m², respectively, indicating slight BMI underestimation due to underestimation of weight and overestimation of height. This trend was related to body weight and age. Height and weight data entered in the Web-CAAFE by children were highly correlated with direct measurements and with the repeated entry. The bias found was similar to validation studies of self-reported weight and height in comparison to direct measurements.

Effect of the Diurnal Atmospheric Bulge on Satellite Accelerations

NASA Technical Reports Server (NTRS)

Wyatt, Stanley P.

1961-01-01

Formulas are developed to express the secular acceleration of a satellite on passing through an atmosphere which bulges in the sunward direction and in which the scale height increases with height, these two properties of the high atmosphere having previously been established from satellite observations. Comparison of the new formulas with those for a spherically symmetric atmosphere of constant scale height indicates that deduced atmospheric densities may be systematically incorrect by up to 50 or 60 percent at heights of 500 to 600 km when the earlier and simpler equations are used.

Production and perception of contrast: The case of the rise-fall contour in German

PubMed Central

Kügler, Frank; Gollrad, Anja

2015-01-01

This study investigates the phonetics of German nuclear rise-fall contours in relation to contexts that trigger either a contrastive or a non-contrastive interpretation in the answer. A rise-fall contour can be conceived of a tonal sequence of L-H-L. A production study elicited target sentences in contrastive and non-contrastive contexts. The majority of cases realized showed a nuclear rise-fall contour. The acoustic analysis of these contours revealed a significant effect of contrastiveness on the height/alignment of the accent peak as a function of focus context. On the other hand, the height/alignment of the low turning point at the beginning of the rise did not show an effect of contrastiveness. In a series of semantic congruency perception tests participants judged the congruency of congruent and incongruent context-stimulus pairs based on three different sets of stimuli: (i) original data, (ii) manipulation of accent peak, and (iii) manipulation of the leading low. Listeners distinguished nuclear rise-fall contours as a function of focus context (Experiment 1 and 2), however not based on manipulations of the leading low (Experiment 3). The results suggest that the alignment and scaling of the accentual peak are sufficient to license a contrastive interpretation of a nuclear rise-fall contour, leaving the rising part as a phonetic onglide, or as a low tone that does not interact with the contrastivity of the context. PMID:26388795

Facial cues to perceived height influence leadership choices in simulated war and peace contexts.

PubMed

Re, Daniel E; DeBruine, Lisa M; Jones, Benedict C; Perrett, David I

2013-01-31

Body size and other signs of physical prowess are associated with leadership hierarchies in many social species. Here we (1) assess whether facial cues associated with perceived height and masculinity have different effects on leadership judgments in simulated wartime and peacetime contexts and (2) test how facial cues associated with perceived height and masculinity influence dominance perceptions. Results indicate that cues associated with perceived height and masculinity in potential leaders‟ faces are valued more in a wartime (vs. peacetime) context. Furthermore, increasing cues of apparent height and masculinity in faces increased perceived dominance. Together, these findings suggest that facial cues of physical stature contribute to establishing leadership hierarchies in humans.

The relationship between facial skeleton morphology and bite force in people with a normal relation of the bases of jaws and skull.

PubMed

Sidorowicz, Ł; Szymańska, J

2015-01-01

Better knowledge on the relationship between craniofacial structure and bite force may serve as a reference point for prophylactic and therapeutic activities targeted at developmental age patients. The aim of the study was to assess the correlation between facial skeletal morphology and bite force. The study included 54 subjects aged 7-16 years with a normal relation of the bases of jaws and skull, according to Segner's and Hasund's analysis standards (ML-NL and ML-NSL angles values were 20.0 ± 7.0° and 28.0 ± 5.0°, respectively). The study group included patients who volunteered to diagnosis and possible orthodontic treatment. Bite force was tested with a digital dynamometer calibrated in Newtons. The measurement was performed at the level of the first permanent molars. Cephalometric analysis was based on lateral cephalometric radiographs. The vertical relations were assessed using the following measurements: ML-NSL, ML-NL, NL-NSL, N-Me, Sp-Me, SpMe:NMe, ms-NL, SGo:NMe. Bite force does not depend on the following factors: lower anterior face height (Sp-Me), lower anterior face height to total anterior face height ratio (SpMe:NMe), posterior to anterior face height ratio (SG0:NMe), and the value of ML-NL, ML-NSL and NL-NSL angles. The posterior height of the maxilla alveolar process (ms-NL) exerts the greatest influence on bite force in people with a normal relation of the bases of jaws and skull: with an increase in ms-NL value bite force is reduced.

Rates of Eolian Rock Abrasion in the Ice-Free Valleys, Antarctica

NASA Astrophysics Data System (ADS)

Hallet, B.; Malin, M. C.; Sletten, R. S.

2016-12-01

Eolian abrasion is a principal surface process in dry regions of Earth and Mars and there is evidence for wind processes active on Venus and Titan. Rock abrasion also has practical significance in diverse fields ranging from preservation of cultural material (artifacts, monuments) to damage of solar panels and windshields in arid regions. Despite its scientific and practical importance, and there have ben only few studies that define rates of rock abrasion quantitatively under natural conditions. Herein we report abrasion rates that have been exceptionally well characterized through a unique long-term (30+-year) field experiment in the ice-free McMurdo Dry Valleys, Antarctica. In 1983 and 1984, over 5000 rock targets of several lithologies (25.4 mm-diameter and 5 mm-thick disks of dolerite, basalt, tuff and sandstone) were installed at five heights (7,14, 21, 35, and 70 cm) facing the 4 cardinal directions at 10 locations (one additional site contains fewer targets). Sequential collections of rock targets exposed to abrasion enable definition of mass loss after 1, 5, 10, 30 and 31 years of exposure; the latter were retrieved during the 2014-2015 season. The abrasion rates generally show striking consistency for each lithology at any site; the multiple targets permit definition of intrinsic differences in mass loss. The rates vary considerably from site to site owing to differences in availability of transportable sediment, wind regime, and surface roughness, and at each site, owing to target orientation relative to the dominant winds and, secondarily, to height above the ground. For the hardest targets, basalt and dolerite, mass loss in 30+ years ranged from essentially zero at some sites to 1/3 of the deployed mass (2.59 g; equivalent to a rock thickness >1.8 mm) where abrasion was most active (Site 7, Central Wright Valley). The tuff targets showed the greatest mass loss, and in many cases were entirely abraded away by the end of the experiment.Current work is focused on understanding the spatial and directional variation in measured mass losses based on a wealth of information.

Asthma, inhaled corticosteroid treatment, and growth.

PubMed

Ninan, T K; Russell, G

1992-06-01

To evaluate the effects on growth of inhaled corticosteroid treatment (ICT) and of the quality of control of asthma, height velocity was studied in 58 prepubertal children attending a specialist asthma clinic because of chronic asthma that was difficult to control. The height velocity standard deviation (SD) score was maximal when the asthma was well controlled both before (0.01) and after (-0.07) starting ICT. It was least when the asthma was poorly controlled both before (-1.50) and after (-1.55) starting ICT. The effectiveness of control correlated significantly with the height velocity SD score, both before and after ICT was started. No evidence was found that the administration of ICT has an adverse effect on growth.

Hierarchical control of ride height system for electronically controlled air suspension based on variable structure and fuzzy control theory

NASA Astrophysics Data System (ADS)

Xu, Xing; Zhou, Kongkang; Zou, Nannan; Jiang, Hong; Cui, Xiaoli

2015-09-01

The current research of air suspension mainly focuses on the characteristics and design of the air spring. In fact, electronically controlled air suspension (ECAS) has excellent performance in flexible height adjustment during different driving conditions. However, the nonlinearity of the ride height adjusting system and the uneven distribution of payload affect the control accuracy of ride height and the body attitude. Firstly, the three-point measurement system of three height sensors is used to establish the mathematical model of the ride height adjusting system. The decentralized control of ride height and the centralized control of body attitude are presented to design the ride height control system for ECAS. The exact feedback linearization method is adopted for the nonlinear mathematical model of the ride height system. Secondly, according to the hierarchical control theory, the variable structure control (VSC) technique is used to design a controller that is able to adjust the ride height for the quarter-vehicle anywhere, and each quarter-vehicle height control system is independent. Meanwhile, the three-point height signals obtained by three height sensors are tracked to calculate the body pitch and roll attitude over time, and then by calculating the deviation of pitch and roll and its rates, the height control correction is reassigned based on the fuzzy algorithm. Finally, to verify the effectiveness and performance of the proposed combined control strategy, a validating test of ride height control system with and without road disturbance is carried out. Testing results show that the height adjusting time of both lifting and lowering is over 5 s, and the pitch angle and the roll angle of body attitude are less than 0.15°. This research proposes a hierarchical control method that can guarantee the attitude stability, as well as satisfy the ride height tracking system.

Decomposing the effect of height on income in China: The role of market and political channels.

PubMed

Yamamura, Eiji; Smyth, Russell; Zhang, Yan

2015-12-01

It is well known that height is positively associated with earnings. Based on individual level data, this paper investigates the channels through which height influences income in China. Our first key finding is that for males (females) a 1 centimeter (cm) increase in height leads to a 0.5% (0.02%) increase in the probability that he (she) becomes a Communist Party member. Further, the hourly wage of Communist Party members is approximately 11% higher than non-members for males, while no difference in the hourly wage between Party members and non-members is observed for females. Therefore, a 1cm increase in height leads to approximately a 0.06% increase in the hourly wage, which is observed only for males. We label this the height premium in earnings through the political channel. Second, controlling for the political channel of the height premium, a 1cm increase in height leads to a 1.18% (1.04%) increase in the hourly wage for males (females). We label this the height premium through the market channel. Together, these results suggest that the height premium in earnings through the market channel is much larger than that through the political channel. Copyright © 2015 Elsevier B.V. All rights reserved.

BMI may overestimate the prevalence of obesity among women of lower socioeconomic status.

PubMed

Kaluski, Dorit Nitzan; Keinan-Boker, Lital; Stern, Felicia; Green, Manfred S; Leventhal, Alex; Goldsmith, Rebecca; Chinich, Ayelet; Berry, Elliot M

2007-07-01

Our objective was to examine gender differences in height and weight associated with socioeconomic status (SES) and the consequent effect on body mass index in a multiethnic society. A cross-sectional study, the First Israeli National Health and Nutrition Survey, was performed on a representative population sample of 3246 adults 25 to 64 years of age, between the years 1999 to 2001. Height and weight were measured, and BMI and other weight-height indices were calculated. SES was assessed by income and education. Age-adjusted height was significantly lower at lower levels of SES among both women and men (p<0.001). As opposed to men, women of lower SES were heavier than those of higher SES, and the mean age-adjusted weight was 4.6 kg higher among those of lower SES (p<0.001). Thus, using the standard index of BMI, the prevalence of obesity was significantly higher among shorter women. In this group of Israeli adults, the unfavorable effect of low SES on BMI was evident among women, partly due to their decreased height combined with increased weight common in this socioeconomic sector. Since BMI is only partly independent of height, it may overestimate the prevalence of obesity among women of lower SES. Alternative measures for classifying obesity in the lower SES groups that put less emphasis on height may be considered and studied.

Trends in the associations between family income, height and body mass index in US children and adolescents: 1971-1980 and 1999-2008.

PubMed

Murasko, Jason E

2011-05-01

This paper evaluates trends in the childhood and adolescent associations between family income, height and body mass index (BMI) between the periods 1971-1980 and 1999-2008. US-born children (aged 2-11) and adolescents (aged 12-19) in the NHANES I, NHANES II and 1999-2008 NHANES are evaluated for BMI and height using flexibly-estimated structured additive regression models. Three trends are identified: BMI gains have been greater in lower-income relative to higher-income children and adolescents; height has increased more in lower-income relative to higher-income children (but not in adolescents); and BMI has increased more in taller children than shorter children (but not in adolescents). Following from these trends is that contemporary children exhibit a negative height-income interaction effect on BMI such that the inverse association between income and BMI is larger in taller children. Similar results hold when categorical obesity is considered but with modest height-related changes and income-height interaction effect in adolescents. Race-sex differences are explored and descriptive evidence on the potential role of changes in caloric intake is presented. The relationship between the economic environment and growth in US youth has changed in recent decades. Contemporary taller and lower-income children exhibit greater body mass and obesity.

Low bioavailable testosterone levels predict future height loss in postmenopausal women.

PubMed

Jassal, S K; Barrett-Connor, E; Edelstein, S L

1995-04-01

The objective of this study was to examine the relation of endogenous sex hormones to subsequent height loss in postmenopausal women, in whom height loss is usually a surrogate for osteoporotic vertebral fractures. This was a prospective, community-based study. The site chosen was Rancho Bernardo, an upper middle class community in Southern California. A total of 170 postmenopausal women participated, aged 55-80 years. None of them were taking exogenous estrogen between 1972 and 1974. Plasma was obtained for sex hormone and sex hormone-binding globulin (SHBG) assays. Estradiol/SHBG and testosterone/SHBG ratios were used to estimate biologically available hormone levels; bioavailable (non-SHBG-bound) testosterone was measured directly in 60 women. Height loss was based on height measurements taken 16 years apart. Height loss was strongly correlated with age (p = 0.001). These women lost an average 0.22 cm/year in height. Neither estrone nor estradiol levels were significantly and independently related to height loss. Both estimated bioavailable testosterone (testosterone/SHBG ratio) and measured bioavailable testosterone levels predicted future height loss (p = 0.02 and 0.08, respectively) independent of age, obesity, cigarette smoking, alcohol intake, and use of thiazides and estrogen. We conclude that bioavailable testosterone is an independent predictor of height loss in elderly postmenopausal women. The reduced height loss is compatible with a direct effect of testosterone on bone mineral density or bone remodeling.

Measurements of the spatial structure and directivity of 100 KeV photon sources in solar flares using PVO and ISEE-3 spacecraft

NASA Technical Reports Server (NTRS)

Anderson, Kinsey A.

1991-01-01

The objective of this grant was to measure the spatial structure and directivity of the hard X-ray and low energy gamma-ray (100 keV-2 MeV) continuum sources in solar flares using stereoscopic observations made with spectrometers aboard the Pioneer Venus Orbiter (PVO) and Third International Sun Earth Explorer (ISEE-3) spacecraft. Since the hard X-ray emission is produced by energetic electrons through the bremsstrahlung process, the observed directivity can be directly related to the 'beaming' of electrons accelerated during the flare as they propagate from the acceleration region in the corona to the chromosphere/transition region. Some models (e.g., the thick-target model) predict that most of the impulsive hard X-ray/low energy gamma-ray source is located in the chromosphere, the effective height of the X-ray source above the photosphere increasing with the decrease in the photon energy. This can be verified by determining the height-dependence of the photon source through stereoscopic observations of those flares which are partially occulted from the view of one of the two spacecraft. Thus predictions about beaming of electrons as well as their spatial distributions could be tested through the analysis proposed under this grant.

Effect of fiber post length and abutment height on fracture resistance of endodontically treated premolars prepared for zirconia crowns.

PubMed

Lin, Jie; Matinlinna, Jukka Pekka; Shinya, Akikazu; Botelho, Michael George; Zheng, Zhiqiang

2018-04-01

The purpose of this study was to compare the fracture resistance, mode of fracture, and stress distribution of endodontically treated teeth prepared with three different fiber post lengths and two different abutment heights, using both experimental and finite element (FE) approaches. Forty-eight human maxillary premolars with two roots were selected and endodontically treated. The teeth were randomly distributed into six equally sized groups (n = 8) with different combinations of post lengths (7.5, 11, and 15 mm) and abutment heights (3 and 5 mm). All the teeth restored with glass fiber post (Rely X Fiber Post, 3M ESPE, USA) and a full zirconia crown. All the specimens were thermocycled and then loaded to failure at an oblique angle of 135°. Statistical analysis was performed for the effects of post length and abutment height on failure loads using ANOVA and Tukey's honestly significant difference test. In addition, corresponding FE models of a premolar restored with a glass fiber post were developed to examine mechanical responses. The factor of post length (P < 0.01) had a significant effect on failure load. The abutment height (P > 0.05) did not have a significant effect on failure load. The highest mean fracture resistance was recorded for the 15 mm post length and 5 mm abutment height test group, which was significantly more resistant to fracture than the 7.5 mm post and 5 mm abutment height group (P < 0.05). The FE analysis showed the peak compression and tension stress values of 7.5 mm post length were higher than that of 11 and 15 mm post length. The stress value of remaining tooth decreased as the post length was increased. Within the limitations of this experimental and FE analysis study, increasing the post length inside the root of endodontically treated premolar teeth restored with glass-fiber posts increase the fracture resistance to non-axial forces. Failure mode is more favorable with reduced abutment heights.

Integrated calibration of multiview phase-measuring profilometry

NASA Astrophysics Data System (ADS)

Lee, Yeong Beum; Kim, Min H.

2017-11-01

Phase-measuring profilometry (PMP) measures per-pixel height information of a surface with high accuracy. Height information captured by a camera in PMP relies on its screen coordinates. Therefore, a PMP measurement from a view cannot be integrated directly to other measurements from different views due to the intrinsic difference of the screen coordinates. In order to integrate multiple PMP scans, an auxiliary calibration of each camera's intrinsic and extrinsic properties is required, in addition to principal PMP calibration. This is cumbersome and often requires physical constraints in the system setup, and multiview PMP is consequently rarely practiced. In this work, we present a novel multiview PMP method that yields three-dimensional global coordinates directly so that three-dimensional measurements can be integrated easily. Our PMP calibration parameterizes intrinsic and extrinsic properties of the configuration of both a camera and a projector simultaneously. It also does not require any geometric constraints on the setup. In addition, we propose a novel calibration target that can remain static without requiring any mechanical operation while conducting multiview calibrations, whereas existing calibration methods require manually changing the target's position and orientation. Our results validate the accuracy of measurements and demonstrate the advantages on our multiview PMP.

A validation study of the simulation software gprMax by varying antenna stand-off height

NASA Astrophysics Data System (ADS)

Wilkinson, Josh; Davidson, Nigel

2018-04-01

The design and subsequent testing of suitable antennas and of complete ground-penetrating radar (GPR) systems can be both time consuming and expensive, with the need to understand the performance of a system in realistic environments of great importance to the end user. Through the use of suitably validated simulations, these costs could be significantly reduced, allowing an economical capability to be built which can accurately predict the performance of novel GPR antennas and existing commercial-off-the-shelf (COTS) systems in a user defined environment. This paper focuses on a preliminary validation of the open source software gprMax1 which features the ability to custom define antennas, targets, clutter objects and realistic heterogeneous soils. As an initial step in the assessment of the software, a comparison of the modelled response of targets buried in sand to experimental data has been undertaken, with the variation in response with antenna stand-off height investigated. This was conducted for both a simple bespoke bow-tie antenna design as well as for a Geophysical Survey Systems, Inc. (GSSI) commercial system,2 building upon previous work3 which explored the fidelity of gprMax in reproducing the S11 of simple antenna designs.

Automated lidar-derived canopy height estimates for the Upper Mississippi River System

USGS Publications Warehouse

Hlavacek, Enrika

2015-01-01

Land cover/land use (LCU) classifications serve as important decision support products for researchers and land managers. The LCU classifications produced by the U.S. Geological Survey’s Upper Midwest Environmental Sciences Center (UMESC) include canopy height estimates that are assigned through manual aerial photography interpretation techniques. In an effort to improve upon these techniques, this project investigated the use of high-density lidar data for the Upper Mississippi River System to determine canopy height. An ArcGIS tool was developed to automatically derive height modifier information based on the extent of land cover features for forest classes. The measurement of canopy height included a calculation of the average height from lidar point cloud data as well as the inclusion of a local maximum filter to identify individual tree canopies. Results were compared to original manually interpreted height modifiers and to field survey data from U.S. Forest Service Forest Inventory and Analysis plots. This project demonstrated the effectiveness of utilizing lidar data to more efficiently assign height modifier attributes to LCU classifications produced by the UMESC.

Near normalization of adult height and body proportions by growth hormone in pycnodysostosis.

PubMed

Rothenbühler, Anya; Piquard, Catherine; Gueorguieva, Iva; Lahlou, Najiba; Linglart, Agnès; Bougnères, Pierre

2010-06-01

Mutations in the cathepsin K gene (CTSK) cause a very rare form of short-limb dwarfism called pyknodysostosis (online inheritance in man 265800) that reduces adult height to 130-150 cm. To study the effects of GH in children with pyknodysostosis. This was a pilot open study of three children with pyknodysostosis (P1, P2, P3) and 16 age-matched children with idiopathic short stature (ISS) treated with a similar IGF-I-based dosing of GH therapy. P1, P2, and P3 received a mean GH dose of 29, 67, and 120 microg/kg x d, respectively, during 12, 6.5, and 5 yr, whereas the ISS group received a mean dose of 62 +/- 21 microg/kg x d during 5.4 +/- 2 yr. P1, P2, and P3 had the typical clinical and radiological features of pyknodysostosis. They were shown to carry three different homozygous missense mutations of the CTSK gene. After onset of GH at 4.5, 5.4, and 10.9 yr of age, respectively, height increased from -2, -4.2, and -3 SD score to -1, -0.5, and -1 SD score after a 12, 6.5, and 5 yr GH treatment. Remarkably, body disproportion was largely corrected by GH treatment. IGF-I levels in P1, P2, and P3 were within the range of the ISS group. Pyknodysostotic patients can reach near-normal stature and skeletal proportions with a personalized GH treatment targeted at appropriate IGF-I levels. Given the severity of this rare dwarfism, we propose that GH should be offered to affected children.

An epidemiological study of urban and rural children in Pakistan: examining the relationship between delayed psychomotor development, low birth weight and postnatal growth failure.

PubMed

Avan, Bilal I; Raza, Syed A; Kirkwood, Betty R

2015-03-01

Low birth weight is known to be associated with postnatal growth failure. It is not yet established that both conditions are determinants of psychomotor development. The study investigated whether or not low birth weight leads to delayed psychomotor development of a child, and whether it can be mitigated by adequate postnatal growth. A cross-sectional study was conducted in 2002 in 15 rural and 11 urban communities of Sindh province, Pakistan. Assessment of 1234 children less than 3 years of age included Bayley's Scale of Infant Development II, socioeconomic questionnaire and anthropometry; WHO standards were used to calculate z-scores of height-for-age, weight-for-height and weight-for-age. The underlying study hypotheses were tested through multiple regression modelling. Out of 1219 children, 283 (23.2%) had delayed psychomotor development and 639 (52.4%) were undernourished according to the composite index of anthropometric failure. Strong negative associations with the psychomotor development index were detected between stunting and being underweight, with a larger magnitude of effect for stunting (p<0.001). The strong relationship persisted even when the analysis was restricted to non-malnourished children. The psychomotor index increased by 2.07 points with every unit increase in height-for-age z-score. The relationship between low birth weight and psychomotor development appears to be mediated largely by postnatal growth and nutritional status. This association suggests that among undernourished children there is significant likelihood of a group that is developmentally delayed. It is important to emphasize developmental needs in programmes that target underprivileged children. © The Author 2014. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Inelastic deformation demands of regular steel frames subjected to pulse-like near-fault ground shakings

NASA Astrophysics Data System (ADS)

Siahpolo, Navid; Gerami, Mohsen; Vahdani, Reza

2016-09-01

Evaluating the capability of elastic Load Patterns (LPs) including seismic codes and modified LPs such as Method of Modal Combination (MMC) and Upper Bound Pushover Analysis (UBPA) in estimating inelastic demands of non deteriorating steel moment frames is the main objective of this study. The Static Nonlinear Procedure (NSP) is implemented and the results of NSP are compared with Nonlinear Time History Analysis (NTHA). The focus is on the effects of near-fault pulselike ground motions. The primary demands of interest are the maximum floor displacement, the maximum story drift angle over the height, the maximum global ductility, the maximum inter-story ductility and the capacity curves. Five types of LPs are selected and the inelastic demands are calculated under four levels of inter-story target ductility ( μ t) using OpenSees software. The results show that the increase in μ t coincides with the migration of the peak demands over the height from the top to the bottom stories. Therefore, all LPs estimate the story lateral displacement accurately at the lower stories. The results are almost independent of the number of stories. While, the inter-story drift angle (IDR) obtained from MMC method has the most appropriate accuracy among the other LPs. Although, the accuracy of this method decreases with increasing μ t so that with increasing number of stories, IDR is smaller or greater than the values resulted from NTHA depending on the position of captured results. In addition, increasing μ t decreases the accuracy of all LPs in determination of critical story position. In this case, the MMC method has the best coincidence with distribution of inter-story ductility over the height.

47 CFR 90.542 - Broadband transmitting power limits.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Antenna height (AAT) in meters(feet) Effective radiated power (ERP)(watts) Above 1372 (4500) 65 Above 1220... Bandwidth of 1 MHz or Less Antenna height (AAT) in meters(feet) Effective radiated power (ERP)(watts) Above... (3000) To 1067 (3500) 200 Above 763 (2500) To 915 (3000) 280 Above 610 (2000) To 763 (2500) 400 Above...

Modeling effects of overstory density and competing vegetation on tree height growth

Treesearch

Christian Salas; Albert R. Stage; Andrew P. Robinson

2007-01-01

We developed and evaluated an individual-tree height growth model for Douglas-fir [Pseudotsuga menziesii (Mirbel) Franco] in the Inland Northwest United States. The model predicts growth for all tree sizes continuously, rather than requiring a transition between independent models for juvenile and mature growth phases. The model predicts the effects...

Fertilization and spacing effects on growth of planted ponderosa pine.

Treesearch

P.H. Cochran; R.P. Newman; James W. Barrett

1991-01-01

Fertilizer placed in the planting hole increased height growth of ponderosa pine (Pinus ponderosa Dougl. ex Laws.) early in the life of the plantation. Later broadcast applications of fertilizer may have had little effect on growth. Wider spacings produced larger trees but less volume per acre than narrower spacings after average tree height...

Large-eddy simulations of surface roughness parameter sensitivity to canopy-structure characteristics

DOE PAGES

Maurer, K. D.; Bohrer, G.; Kenny, W. T.; ...

2015-04-30

Surface roughness parameters, namely the roughness length and displacement height, are an integral input used to model surface fluxes. However, most models assume these parameters to be a fixed property of plant functional type and disregard the governing structural heterogeneity and dynamics. In this study, we use large-eddy simulations to explore, in silico, the effects of canopy-structure characteristics on surface roughness parameters. We performed a virtual experiment to test the sensitivity of resolved surface roughness to four axes of canopy structure: (1) leaf area index, (2) the vertical profile of leaf density, (3) canopy height, and (4) canopy gap fraction.more » We found roughness parameters to be highly variable, but uncovered positive relationships between displacement height and maximum canopy height, aerodynamic canopy height and maximum canopy height and leaf area index, and eddy-penetration depth and gap fraction. We also found negative relationships between aerodynamic canopy height and gap fraction, as well as between eddy-penetration depth and maximum canopy height and leaf area index. We generalized our model results into a virtual "biometric" parameterization that relates roughness length and displacement height to canopy height, leaf area index, and gap fraction. Using a decade of wind and canopy-structure observations in a site in Michigan, we tested the effectiveness of our model-driven biometric parameterization approach in predicting the friction velocity over heterogeneous and disturbed canopies. We compared the accuracy of these predictions with the friction-velocity predictions obtained from the common simple approximation related to canopy height, the values calculated with large-eddy simulations of the explicit canopy structure as measured by airborne and ground-based lidar, two other parameterization approaches that utilize varying canopy-structure inputs, and the annual and decadal means of the surface roughness parameters at the site from meteorological observations. We found that the classical representation of constant roughness parameters (in space and time) as a fraction of canopy height performed relatively well. Nonetheless, of the approaches we tested, most of the empirical approaches that incorporate seasonal and interannual variation of roughness length and displacement height as a function of the dynamics of canopy structure produced more precise and less biased estimates for friction velocity than models with temporally invariable parameters.« less

Large-eddy simulations of surface roughness parameter sensitivity to canopy-structure characteristics

NASA Astrophysics Data System (ADS)

Maurer, K. D.; Bohrer, G.; Kenny, W. T.; Ivanov, V. Y.

2015-04-01

Surface roughness parameters, namely the roughness length and displacement height, are an integral input used to model surface fluxes. However, most models assume these parameters to be a fixed property of plant functional type and disregard the governing structural heterogeneity and dynamics. In this study, we use large-eddy simulations to explore, in silico, the effects of canopy-structure characteristics on surface roughness parameters. We performed a virtual experiment to test the sensitivity of resolved surface roughness to four axes of canopy structure: (1) leaf area index, (2) the vertical profile of leaf density, (3) canopy height, and (4) canopy gap fraction. We found roughness parameters to be highly variable, but uncovered positive relationships between displacement height and maximum canopy height, aerodynamic canopy height and maximum canopy height and leaf area index, and eddy-penetration depth and gap fraction. We also found negative relationships between aerodynamic canopy height and gap fraction, as well as between eddy-penetration depth and maximum canopy height and leaf area index. We generalized our model results into a virtual "biometric" parameterization that relates roughness length and displacement height to canopy height, leaf area index, and gap fraction. Using a decade of wind and canopy-structure observations in a site in Michigan, we tested the effectiveness of our model-driven biometric parameterization approach in predicting the friction velocity over heterogeneous and disturbed canopies. We compared the accuracy of these predictions with the friction-velocity predictions obtained from the common simple approximation related to canopy height, the values calculated with large-eddy simulations of the explicit canopy structure as measured by airborne and ground-based lidar, two other parameterization approaches that utilize varying canopy-structure inputs, and the annual and decadal means of the surface roughness parameters at the site from meteorological observations. We found that the classical representation of constant roughness parameters (in space and time) as a fraction of canopy height performed relatively well. Nonetheless, of the approaches we tested, most of the empirical approaches that incorporate seasonal and interannual variation of roughness length and displacement height as a function of the dynamics of canopy structure produced more precise and less biased estimates for friction velocity than models with temporally invariable parameters.

Patterns of Growth after Kidney Transplantation among Children with ESRD

PubMed Central

Franke, Doris; Thomas, Lena; Steffens, Rena; Pavičić, Leo; Gellermann, Jutta; Froede, Kerstin; Querfeld, Uwe; Haffner, Dieter

2015-01-01

Background and objectives Poor linear growth is a frequent complication of CKD. This study evaluated the effect of kidney transplantation on age-related growth of linear body segments in pediatric renal transplant recipients who were enrolled from May 1998 until August 2013 in the CKD Growth and Development observational cohort study. Design, setting, participants, & measurements Linear growth (height, sitting height, arm and leg lengths) was prospectively investigated during 1639 annual visits in a cohort of 389 pediatric renal transplant recipients ages 2–18 years with a median follow-up of 3.4 years (interquartile range, 1.9–5.9 years). Linear mixed-effects models were used to assess age-related changes and predictors of linear body segments. Results During early childhood, patients showed lower mean SD scores (SDS) for height (−1.7) and a markedly elevated sitting height index (ratio of sitting height to total body height) compared with healthy children (1.6 SDS), indicating disproportionate stunting (each P<0.001). After early childhood a sustained increase in standardized leg length and a constant decrease in standardized sitting height were noted (each P<0.001), resulting in significant catch-up growth and almost complete normalization of sitting height index by adult age (0.4 SDS; P<0.01 versus age 2–4 years). Time after transplantation, congenital renal disease, bone maturation, steroid exposure, degree of metabolic acidosis and anemia, intrauterine growth restriction, and parental height were significant predictors of linear body dimensions and body proportions (each P<0.05). Conclusions Children with ESRD present with disproportionate stunting. In pediatric renal transplant recipients, a sustained increase in standardized leg length and total body height is observed from preschool until adult age, resulting in restoration of body proportions in most patients. Reduction of steroid exposure and optimal metabolic control before and after transplantation are promising measures to further improve growth outcome. PMID:25352379

Patterns of growth after kidney transplantation among children with ESRD.

PubMed

Franke, Doris; Thomas, Lena; Steffens, Rena; Pavičić, Leo; Gellermann, Jutta; Froede, Kerstin; Querfeld, Uwe; Haffner, Dieter; Živičnjak, Miroslav

2015-01-07

Poor linear growth is a frequent complication of CKD. This study evaluated the effect of kidney transplantation on age-related growth of linear body segments in pediatric renal transplant recipients who were enrolled from May 1998 until August 2013 in the CKD Growth and Development observational cohort study. Linear growth (height, sitting height, arm and leg lengths) was prospectively investigated during 1639 annual visits in a cohort of 389 pediatric renal transplant recipients ages 2-18 years with a median follow-up of 3.4 years (interquartile range, 1.9-5.9 years). Linear mixed-effects models were used to assess age-related changes and predictors of linear body segments. During early childhood, patients showed lower mean SD scores (SDS) for height (-1.7) and a markedly elevated sitting height index (ratio of sitting height to total body height) compared with healthy children (1.6 SDS), indicating disproportionate stunting (each P<0.001). After early childhood a sustained increase in standardized leg length and a constant decrease in standardized sitting height were noted (each P<0.001), resulting in significant catch-up growth and almost complete normalization of sitting height index by adult age (0.4 SDS; P<0.01 versus age 2-4 years). Time after transplantation, congenital renal disease, bone maturation, steroid exposure, degree of metabolic acidosis and anemia, intrauterine growth restriction, and parental height were significant predictors of linear body dimensions and body proportions (each P<0.05). Children with ESRD present with disproportionate stunting. In pediatric renal transplant recipients, a sustained increase in standardized leg length and total body height is observed from preschool until adult age, resulting in restoration of body proportions in most patients. Reduction of steroid exposure and optimal metabolic control before and after transplantation are promising measures to further improve growth outcome. Copyright © 2015 by the American Society of Nephrology.

Automatic computation for optimum height planning of apartment buildings to improve solar access

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seong, Yoon-Bok; Kim, Yong-Yee; Seok, Ho-Tae

2011-01-15

The objective of this study is to suggest a mathematical model and an optimal algorithm for determining the height of apartment buildings to satisfy the solar rights of survey buildings or survey housing units. The objective is also to develop an automatic computation model for the optimum height of apartment buildings and then to clarify the performance and expected effects. To accomplish the objective of this study, the following procedures were followed: (1) The necessity of the height planning of obstruction buildings to satisfy the solar rights of survey buildings or survey housing units is demonstrated by analyzing through amore » literature review the recent trend of disputes related to solar rights and to examining the social requirements in terms of solar rights. In addition, the necessity of the automatic computation system for height planning of apartment buildings is demonstrated and a suitable analysis method for this system is chosen by investigating the characteristics of analysis methods for solar rights assessment. (2) A case study on the process of height planning of apartment buildings will be briefly described and the problems occurring in this process will then be examined carefully. (3) To develop an automatic computation model for height planning of apartment buildings, geometrical elements forming apartment buildings are defined by analyzing the geometrical characteristics of apartment buildings. In addition, design factors and regulations required in height planning of apartment buildings are investigated. Based on this knowledge, the methodology and mathematical algorithm to adjust the height of apartment buildings by automatic computation are suggested and probable problems and the ways to resolve these problems are discussed. Finally, the methodology and algorithm for the optimization are suggested. (4) Based on the suggested methodology and mathematical algorithm, the automatic computation model for optimum height of apartment buildings is developed and the developed system is verified through the application of some cases. The effects of the suggested model are then demonstrated quantitatively and qualitatively. (author)« less

Impacts of Water Stress on Forest Recovery and Its Interaction with Canopy Height.

PubMed

Xu, Peipei; Zhou, Tao; Yi, Chuixiang; Luo, Hui; Zhao, Xiang; Fang, Wei; Gao, Shan; Liu, Xia

2018-06-13

Global climate change is leading to an increase in the frequency, intensity, and duration of drought events, which can affect the functioning of forest ecosystems. Because human activities such as afforestation and forest attributes such as canopy height may exhibit considerable spatial differences, such differences may alter the recovery paths of drought-impacted forests. To accurately assess how climate affects forest recovery, a quantitative evaluation on the effects of forest attributes and their possible interaction with the intensity of water stress is required. Here, forest recovery following extreme drought events was analyzed for Yunnan Province, southwest China. The variation in the recovery of forests with different water availability and canopy heights was quantitatively assessed at the regional scale by using canopy height data based on light detection and ranging (LiDAR) measurements, enhanced vegetation index data, and standardized precipitation evapotranspiration index (SPEI) data. Our results indicated that forest recovery was affected by water availability and canopy height. Based on the enhanced vegetation index measures, shorter trees were more likely to recover than taller ones after drought. Further analyses demonstrated that the effect of canopy height on recovery rates after drought also depends on water availability—the effect of canopy height on recovery diminished as water availability increased after drought. Additional analyses revealed that when the water availability exceeded a threshold (SPEI > 0.85), no significant difference in the recovery was found between short and tall trees ( p > 0.05). In the context of global climate change, future climate scenarios of RCP2.6 and RCP8.5 showed more frequent water stress in Yunnan by the end of the 21st century. In summary, our results indicated that canopy height casts an important influence on forest recovery and tall trees have greater vulnerability and risk to dieback and mortality from drought. These results may have broad implications for policies and practices of forest management.

Gas dynamics in the impulsive phase of solar flares. I Thick-target heating by nonthermal electrons

NASA Technical Reports Server (NTRS)

Nagai, F.; Emslie, A. G.

1984-01-01

A numerical investigation is carried out of the gas dynamical response of the solar atmosphere to a flare energy input in the form of precipitating nonthermal electrons. Rather than discussing the origin of these electrons, the spectral and temporal characteristics of the injected flux are inferred through a thick-target model of hard X-ray bremsstrahlung production. It is assumed that the electrons spiral about preexisting magnetic field lines, making it possible for a one-dimensional spatial treatment to be performed. It is also assumed that all electron energy losses are due to Coulomb collisions with ambient particles; that is, return-current ohmic effects and collective plasma processes are neglected. The results are contrasted with earlier work on conductive heating of the flare atmosphere. A local temperature peak is seen at a height of approximately 1500 km above the photosphere. This derives from a spatial maximum in the energy deposition rate from an electron beam. It is noted that such a feature is not present in conductively heated models. The associated localized region of high pressure drives material both upward and downward.

Polarization Smoothing Generalized MUSIC Algorithm with Polarization Sensitive Array for Low Angle Estimation.

PubMed

Tan, Jun; Nie, Zaiping

2018-05-12

Direction of Arrival (DOA) estimation of low-altitude targets is difficult due to the multipath coherent interference from the ground reflection image of the targets, especially for very high frequency (VHF) radars, which have antennae that are severely restricted in terms of aperture and height. The polarization smoothing generalized multiple signal classification (MUSIC) algorithm, which combines polarization smoothing and generalized MUSIC algorithm for polarization sensitive arrays (PSAs), was proposed to solve this problem in this paper. Firstly, the polarization smoothing pre-processing was exploited to eliminate the coherence between the direct and the specular signals. Secondly, we constructed the generalized MUSIC algorithm for low angle estimation. Finally, based on the geometry information of the symmetry multipath model, the proposed algorithm was introduced to convert the two-dimensional searching into one-dimensional searching, thus reducing the computational burden. Numerical results were provided to verify the effectiveness of the proposed method, showing that the proposed algorithm has significantly improved angle estimation performance in the low-angle area compared with the available methods, especially when the grazing angle is near zero.

Joint-action coordination in transferring objects

PubMed Central

Bosga, Jurjen; Hulstijn, Majken; Miedl, Stephan

2007-01-01

Here we report a study of joint-action coordination in transferring objects. Fourteen dyads were asked to repeatedly reposition a cylinder in a shared workspace without using dialogue. Variations in task constraints concerned the size of the two target regions in which the cylinder had to be (re)positioned and the size and weight of the transferred cylinder. Movements of the wrist, index finger and thumb of both actors were recorded by means of a 3D motion-tracking system. Data analyses focused on the interpersonal transfer of lifting-height and movement-speed variations. Whereas the analyses of variance did not reveal any interpersonal transfer effects targeted data comparisons demonstrated that the actor who fetched the cylinder from where the other actor had put it was systematically less surprised by cylinder-weight changes than the actor who was first confronted with such changes. In addition, a moderate, accuracy-constraint independent adaptation to each other’s movement speed was found. The current findings suggest that motor resonance plays only a moderate role in collaborative motor control and confirm the independency between sensorimotor and cognitive processing of action-related information. PMID:17256158

Effect of seedling stock on the early stand development and physiology of improved loblolly pine (Pinus taeda L.) seedlings

Treesearch

Shakuntala Sharma; Joshua P. Adams; Jamie L. Schuler; Robert L. Ficklin; Don C. Bragg

2016-01-01

This study assessed the effects of spacing and genotype on the growth and physiology of improved loblolly pine (Pinus taeda L.) seedlings from three distinct genotypes planted in Drew County, Arkansas (USA). Genotype had a significant effect on survival and height. Clone CF Var 1 showed greater height and survival compared to other seedlings....

Econometric analysis of the changing effects in wind strength and significant wave height on the probability of casualty in shipping.

PubMed

Knapp, Sabine; Kumar, Shashi; Sakurada, Yuri; Shen, Jiajun

2011-05-01

This study uses econometric models to measure the effect of significant wave height and wind strength on the probability of casualty and tests whether these effects changed. While both effects are in particular relevant for stability and strength calculations of vessels, it is also helpful for the development of ship construction standards in general to counteract increased risk resulting from changing oceanographic conditions. The authors analyzed a unique dataset of 3.2 million observations from 20,729 individual vessels in the North Atlantic and Arctic regions gathered during the period 1979-2007. The results show that although there is a seasonal pattern in the probability of casualty especially during the winter months, the effect of wind strength and significant wave height do not follow the same seasonal pattern. Additionally, over time, significant wave height shows an increasing effect in January, March, May and October while wind strength shows a decreasing effect, especially in January, March and May. The models can be used to simulate relationships and help understand the relationships. This is of particular interest to naval architects and ship designers as well as multilateral agencies such as the International Maritime Organization (IMO) that establish global standards in ship design and construction. Copyright © 2011 Elsevier Ltd. All rights reserved.

Height-diameter allometry and above ground biomass in tropical montane forests: Insights from the Albertine Rift in Africa

PubMed Central

Boyemba, Faustin; Lewis, Simon; Nabahungu, Nsharwasi Léon; Calders, Kim; Zapfack, Louis; Riera, Bernard; Balegamire, Clarisse; Cuni-Sanchez, Aida

2017-01-01

Tropical montane forests provide an important natural laboratory to test ecological theory. While it is well-known that some aspects of forest structure change with altitude, little is known on the effects of altitude on above ground biomass (AGB), particularly with regard to changing height-diameter allometry. To address this we investigate (1) the effects of altitude on height-diameter allometry, (2) how different height-diameter allometric models affect above ground biomass estimates; and (3) how other forest structural, taxonomic and environmental attributes affect above ground biomass using 30 permanent sample plots (1-ha; all trees ≥ 10 cm diameter measured) established between 1250 and 2600 m asl in Kahuzi Biega National Park in eastern Democratic Republic of Congo. Forest structure and species composition differed with increasing altitude, with four forest types identified. Different height-diameter allometric models performed better with the different forest types, as trees got smaller with increasing altitude. Above ground biomass ranged from 168 to 290 Mg ha-1, but there were no significant differences in AGB between forests types, as tree size decreased but stem density increased with increasing altitude. Forest structure had greater effects on above ground biomass than forest diversity. Soil attributes (K and acidity, pH) also significantly affected above ground biomass. Results show how forest structural, taxonomic and environmental attributes affect above ground biomass in African tropical montane forests. They particularly highlight that the use of regional height-diameter models introduces significant biases in above ground biomass estimates, and that different height-diameter models might be preferred for different forest types, and these should be considered in future studies. PMID:28617841

Effect of the plate surface characteristics and gap height on yield stresses of a magnetorheological fluid

NASA Astrophysics Data System (ADS)

Jonkkari, I.; Kostamo, E.; Kostamo, J.; Syrjala, S.; Pietola, M.

2012-07-01

Effects of the plate material, surface roughness and measuring gap height on static and dynamic yield stresses of a magnetorheological (MR) fluid were investigated with a commercial plate-plate magnetorheometer. Magnetic and non-magnetic plates with smooth (Ra ˜ 0.3 μm) and rough (Ra ˜ 10 μm) surface finishes were used. It was shown by Hall probe measurements and finite element simulations that the use of magnetic plates or higher gap heights increases the level of magnetic flux density and changes the shape of the radial flux density profile. The yield stress increase caused by these factors was determined and subtracted from the measured values in order to examine only the effect of the wall characteristics or the gap height. Roughening of the surfaces offered a significant increase in the yield stresses for non-magnetic plates. With magnetic plates the yield stresses were higher to start with, but roughening did not increase them further. A significant part of the difference in measured stresses between rough non-magnetic and magnetic plates was caused by changes in magnetic flux density rather than by better contact of the particles to the plate surfaces. In a similar manner, an increase in gap height from 0.25 to 1.00 mm can lead to over 20% increase in measured stresses due to changes in the flux density profile. When these changes were compensated the dynamic yield stresses generally remained independent of the gap height, even in the cases where it was obvious that the wall slip was present. This suggests that with MR fluids the wall slip cannot be reliably detected by comparison of flow curves measured at different gap heights.

Height-diameter allometry and above ground biomass in tropical montane forests: Insights from the Albertine Rift in Africa.

PubMed

Imani, Gérard; Boyemba, Faustin; Lewis, Simon; Nabahungu, Nsharwasi Léon; Calders, Kim; Zapfack, Louis; Riera, Bernard; Balegamire, Clarisse; Cuni-Sanchez, Aida

2017-01-01

Tropical montane forests provide an important natural laboratory to test ecological theory. While it is well-known that some aspects of forest structure change with altitude, little is known on the effects of altitude on above ground biomass (AGB), particularly with regard to changing height-diameter allometry. To address this we investigate (1) the effects of altitude on height-diameter allometry, (2) how different height-diameter allometric models affect above ground biomass estimates; and (3) how other forest structural, taxonomic and environmental attributes affect above ground biomass using 30 permanent sample plots (1-ha; all trees ≥ 10 cm diameter measured) established between 1250 and 2600 m asl in Kahuzi Biega National Park in eastern Democratic Republic of Congo. Forest structure and species composition differed with increasing altitude, with four forest types identified. Different height-diameter allometric models performed better with the different forest types, as trees got smaller with increasing altitude. Above ground biomass ranged from 168 to 290 Mg ha-1, but there were no significant differences in AGB between forests types, as tree size decreased but stem density increased with increasing altitude. Forest structure had greater effects on above ground biomass than forest diversity. Soil attributes (K and acidity, pH) also significantly affected above ground biomass. Results show how forest structural, taxonomic and environmental attributes affect above ground biomass in African tropical montane forests. They particularly highlight that the use of regional height-diameter models introduces significant biases in above ground biomass estimates, and that different height-diameter models might be preferred for different forest types, and these should be considered in future studies.

The Effectiveness, Costs and Coastal Protection Benefits of Natural and Nature-Based Defences

PubMed Central

Narayan, Siddharth; Beck, Michael W.; Reguero, Borja G.; Losada, Iñigo J.; van Wesenbeeck, Bregje; Pontee, Nigel; Sanchirico, James N.; Ingram, Jane Carter; Lange, Glenn-Marie; Burks-Copes, Kelly A.

2016-01-01

There is great interest in the restoration and conservation of coastal habitats for protection from flooding and erosion. This is evidenced by the growing number of analyses and reviews of the effectiveness of habitats as natural defences and increasing funding world-wide for nature-based defences–i.e. restoration projects aimed at coastal protection; yet, there is no synthetic information on what kinds of projects are effective and cost effective for this purpose. This paper addresses two issues critical for designing restoration projects for coastal protection: (i) a synthesis of the costs and benefits of projects designed for coastal protection (nature-based defences) and (ii) analyses of the effectiveness of coastal habitats (natural defences) in reducing wave heights and the biophysical parameters that influence this effectiveness. We (i) analyse data from sixty-nine field measurements in coastal habitats globally and examine measures of effectiveness of mangroves, salt-marshes, coral reefs and seagrass/kelp beds for wave height reduction; (ii) synthesise the costs and coastal protection benefits of fifty-two nature-based defence projects and; (iii) estimate the benefits of each restoration project by combining information on restoration costs with data from nearby field measurements. The analyses of field measurements show that coastal habitats have significant potential for reducing wave heights that varies by habitat and site. In general, coral reefs and salt-marshes have the highest overall potential. Habitat effectiveness is influenced by: a) the ratios of wave height-to-water depth and habitat width-to-wavelength in coral reefs; and b) the ratio of vegetation height-to-water depth in salt-marshes. The comparison of costs of nature-based defence projects and engineering structures show that salt-marshes and mangroves can be two to five times cheaper than a submerged breakwater for wave heights up to half a metre and, within their limits, become more cost effective at greater depths. Nature-based defence projects also report benefits ranging from reductions in storm damage to reductions in coastal structure costs. PMID:27135247

Effect of Domain Initial Strengthening on Vowel Height and Backness Contrasts in French: Acoustic and Ultrasound Data

ERIC Educational Resources Information Center

Georgeton, Laurianne; Antolík, Tanja Kocjancic; Fougeron, Cécile

2016-01-01

Purpose: Phonetic variation due to domain initial strengthening was investigated with respect to the acoustic and articulatory distinctiveness of vowels within a subset of the French oral vowel system /i, e, ?, a, o, u/, organized along 4 degrees of height for the front vowels and 2 degrees of backness at the close and midclose height levels.…

Effects of ozone and sulfur dioxide on height and stem specific gravity of Populus hybrids

Treesearch

Roy L. Patton

1981-01-01

Unfumigated hybrid poplars (Populus spp.) were compared with poplars of the same nine clones fumigated with 0.15 pprn ozone or 0.25 ppm sulfur dioxide. After 102 days, plant height and stem specific gravity were measured to determine whether specific gravity is altered by the fumigants and to compare that response to height suppression, an accepted...

Corrective Equations to Self-Reported Height and Weight for Obesity Estimates among U.S. Adults: NHANES 1999-2008

ERIC Educational Resources Information Center

Mozumdar, Arupendra; Liguori, Gary

2016-01-01

Purpose: Estimating obesity prevalence using self-reported height and weight is an economic and effective method and is often used in national surveys. However, self-reporting of height and weight can involve misreporting of those variables and has been found to be associated to the size of the individual. This study investigated the biases in…

Effects of pruning height on the diameter growth of yellow birch

Treesearch

Dale S. Solomon; Barton M. Blum

1977-01-01

The diameter growth rate of pruned trees increased the second year after pruning, whereas the diameter growth of unpruned trees was not as fast during the second year. Diameter growth rate was positively correlated with the height to which all branches were pruned. After the pruning shock of the first year, trees pruned to 50 percent of their height showed the greatest...

Tree diversity in relation to tree height: alternative perspectives.

PubMed

Givnish, Thomas J

2017-03-01

Marks et al. (Ecol. Lett., 19, 2016, 743-751) show that tree diversity increases with tree height in North America and argue it reflects habitat 'suitability'. This finding conflicts with classical results, lacks controls for covariates of tree height, and can be explained alternatively using the modified Janzen-Connell effect and regional variance in habitats. © 2017 John Wiley & Sons Ltd/CNRS.

Calibration of d.b.h.-height equations for southern hardwoods

Treesearch

Thomas B. Lynch; A. Gordon Holley; Douglas J. Stevenson

2006-01-01

Data from southern hardwood stands in East Texas were used to estimate parameters for d.b.h.-height equations. Mixed model estimation methods were used, so that the stand from which a tree was sampled was considered a random effect. This makes it possible to calibrate these equations using data collected in a local stand of interest, by using d.b.h. and total height...

The impacts of the quantum-dot confining potential on the spin-orbit effect.

PubMed

Li, Rui; Liu, Zhi-Hai; Wu, Yidong; Liu, C S

2018-05-09

For a nanowire quantum dot with the confining potential modeled by both the infinite and the finite square wells, we obtain exactly the energy spectrum and the wave functions in the strong spin-orbit coupling regime. We find that regardless of how small the well height is, there are at least two bound states in the finite square well: one has the σ x [Formula: see text] = -1 symmetry and the other has the σ x [Formula: see text] = 1 symmetry. When the well height is slowly tuned from large to small, the position of the maximal probability density of the first excited state moves from the center to x ≠ 0, while the position of the maximal probability density of the ground state is always at the center. A strong enhancement of the spin-orbit effect is demonstrated by tuning the well height. In particular, there exists a critical height [Formula: see text], at which the spin-orbit effect is enhanced to maximal.

Error Analysis for High Resolution Topography with Bi-Static Single-Pass SAR Interferometry

NASA Technical Reports Server (NTRS)

Muellerschoen, Ronald J.; Chen, Curtis W.; Hensley, Scott; Rodriguez, Ernesto

2006-01-01

We present a flow down error analysis from the radar system to topographic height errors for bi-static single pass SAR interferometry for a satellite tandem pair. Because of orbital dynamics the baseline length and baseline orientation evolve spatially and temporally, the height accuracy of the system is modeled as a function of the spacecraft position and ground location. Vector sensitivity equations of height and the planar error components due to metrology, media effects, and radar system errors are derived and evaluated globally for a baseline mission. Included in the model are terrain effects that contribute to layover and shadow and slope effects on height errors. The analysis also accounts for nonoverlapping spectra and the non-overlapping bandwidth due to differences between the two platforms' viewing geometries. The model is applied to a 514 km altitude 97.4 degree inclination tandem satellite mission with a 300 m baseline separation and X-band SAR. Results from our model indicate that global DTED level 3 can be achieved.

Stand density, tree social status and water stress influence allocation in height and diameter growth of Quercus petraea (Liebl.).

PubMed

Trouvé, Raphaël; Bontemps, Jean-Daniel; Seynave, Ingrid; Collet, Catherine; Lebourgeois, François

2015-10-01

Even-aged forest stands are competitive communities where competition for light gives advantages to tall individuals, thereby inducing a race for height. These same individuals must however balance this competitive advantage with height-related mechanical and hydraulic risks. These phenomena may induce variations in height-diameter growth relationships, with primary dependences on stand density and tree social status as proxies for competition pressure and access to light, and on availability of local environmental resources, including water. We aimed to investigate the effects of stand density, tree social status and water stress on the individual height-circumference growth allocation (Δh-Δc), in even-aged stands of Quercus petraea Liebl. (sessile oak). Within-stand Δc was used as surrogate for tree social status. We used an original long-term experimental plot network, set up in the species production area in France, and designed to explore stand dynamics on a maximum density gradient. Growth allocation was modelled statistically by relating the shape of the Δh-Δc relationship to stand density, stand age and water deficit. The shape of the Δh-Δc relationship shifted from linear with a moderate slope in open-grown stands to concave saturating with an initial steep slope in closed stands. Maximum height growth was found to follow a typical mono-modal response to stand age. In open-grown stands, increasing summer soil water deficit was found to decrease height growth relative to radial growth, suggesting hydraulic constraints on height growth. A similar pattern was found in closed stands, the magnitude of the effect however lowering from suppressed to dominant trees. We highlight the high phenotypic plasticity of growth in sessile oak trees that further adapt their allocation scheme to their environment. Stand density and tree social status were major drivers of growth allocation variations, while water stress had a detrimental effect on height in the Δh-Δc allocation. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Age-related changes of the dental aesthetic zone at rest and during spontaneous smiling and speech.

PubMed

Van der Geld, Pieter; Oosterveld, Paul; Kuijpers-Jagtman, Anne Marie

2008-08-01

The aims of this study were to analyse lip line heights and age effects in an adult male population during spontaneous smiling, speech, and tooth display in the natural rest position and to determine whether lip line height follows a consistent pattern during these different functions. The sample consisted of 122 randomly selected male participants from three age cohorts (20-25 years, 35-40 years, and 50-55 years). Lip line heights were measured with a digital videographic method for smile analysis, which had previously been tested and found reliable. Statistical analysis of the data was carried out using correlation analysis, analysis of variance, and Tukey's post hoc tests. Maxillary lip line heights during spontaneous smiling were generally higher in the premolar area than at the anterior teeth. The aesthetic zone in 75 per cent of the participants included all maxillary teeth up to the first molar. Coherence in lip line heights during spontaneous smiling, speech, and tooth display in the natural rest position was confirmed by significant correlations. In older subjects, maxillary lip line heights decreased significantly in all situations. Lip line heights during spontaneous smiling were reduced by approximately 2 mm. In older participants, the mandibular lip line heights also changed significantly and teeth were displayed less during spontaneous smiling. Mandibular tooth display in the rest position increased significantly. Upper lip length increased significantly by almost 4 mm in older subjects, whereas upper lip elevation did not change significantly. The significant increasing lip coverage of the maxillary teeth indicates that the effects of age should be included in orthodontic treatment planning.

Influence of real and virtual heights on standing balance.

PubMed

Cleworth, Taylor W; Horslen, Brian C; Carpenter, Mark G

2012-06-01

Fear and anxiety induced by threatening scenarios, such as standing on elevated surfaces, have been shown to influence postural control in young adults. There is also a need to understand how postural threat influences postural control in populations with balance deficits and risk of falls. However, safety and feasibility issues limit opportunities to place such populations in physically threatening scenarios. Virtual reality (VR) has successfully been used to simulate threatening environments, although it is unclear whether the same postural changes can be elicited by changes in virtual and real threat conditions. Therefore, the purpose of this study was to compare the effects of real and virtual heights on changes to standing postural control, electrodermal activity (EDA) and psycho-social state. Seventeen subjects stood at low and high heights in both real and virtual environments matched in scale and visual detail. A repeated measures ANOVA revealed increases with height, independent of visual environment, in EDA, anxiety, fear, and center of pressure (COP) frequency, and decreases with height in perceived stability, balance confidence and COP amplitude. Interaction effects were seen for fear and COP mean position; where real elicited larger changes with height than VR. This study demonstrates the utility of VR, as simulated heights resulted in changes to postural, autonomic and psycho-social measures similar to those seen at real heights. As a result, VR may be a useful tool for studying threat related changes in postural control in populations at risk of falls, and to screen and rehabilitate balance deficits associated with fear and anxiety. Copyright © 2012 Elsevier B.V. All rights reserved.

[Three dimensional finite element analysis of maxillary anterior teeth retraction with micro-implant anchorage and sliding mechanics].

PubMed

Zhang, Yi; Zhang, Lei; Fan, Yu-bo; Song, Jin-lin; Deng, Feng

2009-10-01

To investigate the biomechanical effects of micro-implant anchorage technique with sliding mechanics on maxillary anterior teeth retraction under different implant insertion heights and different retraction hook heights. The three dimensional finite element model of maxillary anterior teeth retraction force system was constructed with CT scanning and MIMICS software and the relationships between brackets, teeth, wire and micro-implant were simulating the clinical factions. Then the initial tooth displacement was calculated when the insertion heights were 4 mm and 8 mm and the retraction hook heights were 1, 4, 7, 10 mm respectively. With retraction hook height added, the anterior teeth movement changed from lingual crown tipping to labial crown tipping and the intrusion movement was more apparent when the micro-implant was inserted in a higher location. The ideal teeth movement control could be achieved by different insertion heights of micro-implant and different retraction hook heights in straight wire retraction force system.

The effect of physical height on workplace success and income: preliminary test of a theoretical model.

PubMed

Judge, Timothy A; Cable, Daniel M

2004-06-01

In this article, the authors propose a theoretical model of the relationship between physical height and career success. We then test several linkages in the model based on a meta-analysis of the literature, with results indicating that physical height is significantly related to measures of social esteem (rho =.41), leader emergence (rho =.24), and performance (rho =.18). Height was somewhat more strongly related to success for men (rho =.29) than for women (rho =.21), although this difference was not significant. Finally, given that almost no research has examined the relationship between individuals' physical height and their incomes, we present four large-sample studies (total N = 8,590) showing that height is positively related to income (beta =.26) after controlling for sex, age, and weight. Overall, this article presents the most comprehensive analysis of the relationship of height to workplace success to date, and the results suggest that tall individuals have advantages in several important aspects of their careers and organizational lives. (c) 2004 APA

Height and calories in early childhood.

PubMed

Griffen, Andrew S

2016-03-01

This paper estimates a height production function using data from a randomized nutrition intervention conducted in rural Guatemala from 1969 to 1977. Using the experimental intervention as an instrument, the IV estimates of the effect of calories on height are an order of magnitude larger than the OLS estimates. Information from a unique measurement error process in the calorie data, counterfactuals results from the estimated model and external evidence from migration studies suggest that IV is not identifying a policy relevant average marginal impact of calories on height. The preferred, attenuation bias corrected OLS estimates from the height production function suggest that, averaging over ages, a 100 calorie increase in average daily calorie intake over the course of a year would increase height by 0.06 cm. Counterfactuals from the model imply that calories gaps in early childhood can explain at most 16% of the height gap between Guatemalan children and the US born children of Guatemalan immigrants. Copyright © 2015 Elsevier B.V. All rights reserved.

Age-related differences in the maintenance of frontal plane dynamic stability while stepping to targets

PubMed Central

Hurt, Christopher P.; Grabiner, Mark D.

2015-01-01

Older adults may be vulnerable to frontal plane dynamic instability, which is of clinical significance. The purpose of the current investigation was to examine the age-related differences in frontal plane dynamic stability by quantifying the margin of stability and hip abductor moment generation of subjects performing a single crossover step and sidestep to targets that created three different step widths during forward locomotion. Nineteen young adults (9 males, age: 22.9±3.1 years, height: 174.3±10.2 cm, mass: 71.7±13.0 kg) and 18 older adults (9 males, age: 72.8±5.2 years, height: 174.9±8.6 cm, mass: 78.0±16.3 kg) participated. For each walking trial, subjects performed a single laterally-directed step to a target on a force plate. Subjects were instructed to “perform the lateral step and keep walking forward”. The peak hip abductor moment of the stepping limb was 42% larger by older adults compared to younger adults (p<0.001). Older adults were also more stable than younger adults at all step targets (p<0.001). Older adults executed the lateral step with slower forward-directed and lateral-directed velocity despite similar step widths. Age-related differences in hip abduction moments may reflect greater muscular effort by older adults to reduce the likelihood of becoming unstable. The results of this investigation, in which subjects performed progressively larger lateral-directed steps, provide evidence that older adults may not be more laterally unstable than younger adults. However, age-related differences in this study could also reflect a compensatory strategy by older adults to ensure stability while performing this task. PMID:25627870

Age-related differences in the maintenance of frontal plane dynamic stability while stepping to targets.

PubMed

Hurt, Christopher P; Grabiner, Mark D

2015-02-26

Older adults may be vulnerable to frontal plane dynamic instability, which is of clinical significance. The purpose of the current investigation was to examine the age-related differences in frontal plane dynamic stability by quantifying the margin of stability and hip abductor moment generation of subjects performing a single crossover step and sidestep to targets that created three different step widths during forward locomotion. Nineteen young adults (9 males, age: 22.9±3.1 years, height: 174.3±10.2cm, mass: 71.7±13.0kg) and 18 older adults (9 males, age: 72.8±5.2 years, height: 174.9±8.6cm, mass: 78.0±16.3kg) participated. For each walking trial, subjects performed a single laterally-directed step to a target on a force plate. Subjects were instructed to "perform the lateral step and keep walking forward". The peak hip abductor moment of the stepping limb was 42% larger by older adults compared to younger adults (p<0.001). Older adults were also more stable than younger adults at all step targets (p<0.001). Older adults executed the lateral step with slower forward-directed and lateral-directed velocity despite similar step widths. Age-related differences in hip abduction moments may reflect greater muscular effort by older adults to reduce the likelihood of becoming unstable. The results of this investigation, in which subjects performed progressively larger lateral-directed steps, provide evidence that older adults may not be more laterally unstable than younger adults. However, age-related differences in this study could also reflect a compensatory strategy by older adults to ensure stability while performing this task. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effect of barnacle fouling on ship resistance and powering.

PubMed

Demirel, Yigit Kemal; Uzun, Dogancan; Zhang, Yansheng; Fang, Ho-Chun; Day, Alexander H; Turan, Osman

2017-11-01

Predictions of added resistance and the effective power of ships were made for varying barnacle fouling conditions. A series of towing tests was carried out using flat plates covered with artificial barnacles. The tests were designed to allow the examination of the effects of barnacle height and percentage coverage on the resistance and effective power of ships. The drag coefficients and roughness function values were evaluated for the flat plates. The roughness effects of the fouling conditions on the ships' frictional resistances were predicted. Added resistance diagrams were then plotted using these predictions, and powering penalties for these ships were calculated using the diagrams generated. The results indicate that the effect of barnacle size is significant, since a 10% coverage of barnacles each 5 mm in height caused a similar level of added power requirements to a 50% coverage of barnacles each 1.25 mm in height.

Capping of Aβ42 Oligomers by Small Molecule Inhibitors

PubMed Central

2015-01-01

Aβ42 peptides associate into soluble oligomers and protofibrils in the process of forming the amyloid fibrils associated with Alzheimer’s disease. The oligomers have been reported to be more toxic to neurons than fibrils, and have been targeted by a wide range of small molecule and peptide inhibitors. With single touch atomic force microscopy (AFM), we show that monomeric Aβ42 forms two distinct types of oligomers, low molecular weight (MW) oligomers with heights of 1–2 nm and high MW oligomers with heights of 3–5 nm. In both cases, the oligomers are disc-shaped with diameters of ∼10–15 nm. The similar diameters suggest that the low MW species stack to form the high MW oligomers. The ability of Aβ42 inhibitors to interact with these oligomers is probed using atomic force microscopy and NMR spectroscopy. We show that curcumin and resveratrol bind to the N-terminus (residues 5–20) of Aβ42 monomers and cap the height of the oligomers that are formed at 1–2 nm. A second class of inhibitors, which includes sulindac sulfide and indomethacin, exhibit very weak interactions across the Aβ42 sequence and do not block the formation of the high MW oligomers. The correlation between N-terminal interactions and capping of the height of the Aβ oligomers provides insights into the mechanism of inhibition and the pathway of Aβ aggregation. PMID:25422864

Effects of Exyra ridingsii (Lepidoptera: Noctuidae) on Sarracenia flava (Nepenthales: Sarraceniaceae).

PubMed

Ricci, Christine A; Meier, Albert J; Meier, Ouida W; Philips, T Keith

2017-12-08

Exyra ridingsii (Riley) (Lepidoptera: Noctuidae) is a moth whose obligate host is the pitcher plant Sarracenia flava (L.) (Nepenthales: Sarraceniaceae). The entire life cycle of the moth is completed in the trumpets of this fire-dependent plant that is found throughout the southeastern United States in bogs, long-leaf pine savannas, and pocosins. The purpose of this study was to determine the effects of E. ridingsii on S. flava, including the effect of herbivory on trumpet height in the year subsequent to feeding and whether moths select trumpets for oviposition based on height. Although most forms of herbivory by insects might be expected to have negative effects on plants by reducing photosynthetic abilities, it would be counterproductive for herbivory by E. ridingsii to negatively affect S. flava as this plant is the only possible habitat for E. ridingsii. At each site in selected quadrats, the number of trumpets, trumpet height, trumpet status, number of trumpets in a clump, and number of clumps were recorded. The relationship between height and herbivory was analyzed using a linear model, and a positive correlation was found between height and herbivory. E. ridingsii herbivory had no effect on the next year's growth of S. flava based on a Spearman's correlation. Therefore, we concluded that E. ridingsii has little effect on S. flava populations and has likely evolved to selectively avoid herbivory on more vulnerable, smaller plants. © The Authors 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Recycling of laser and plasma radiation energy for enhancement of extreme ultraviolet sources for nanolithography

NASA Astrophysics Data System (ADS)

Sizyuk, V.; Sizyuk, T.; Hassanein, A.; Johnson, K.

2018-01-01

We have developed comprehensive integrated models for detailed simulation of laser-produced plasma (LPP) and laser/target interaction, with potential recycling of the escaping laser and out-of-band plasma radiation. Recycling, i.e., returning the escaping laser and plasma radiation to the extreme ultraviolet (EUV) generation region using retroreflective mirrors, has the potential of increasing the EUV conversion efficiency (CE) by up to 60% according to our simulations. This would result in significantly reduced power consumption and/or increased EUV output. Based on our recently developed models, our High Energy Interaction with General Heterogeneous Target Systems (HEIGHTS) computer simulation package was upgraded for LPP devices to include various radiation recycling regimes and to estimate the potential CE enhancement. The upgraded HEIGHTS was used to study recycling of both laser and plasma-generated radiation and to predict possible gains in conversion efficiency compared to no-recycling LPP devices when using droplets of tin target. We considered three versions of the LPP system including a single CO2 laser, a single Nd:YAG laser, and a dual-pulse device combining both laser systems. The gains in generating EUV energy were predicted and compared for these systems. Overall, laser and radiation energy recycling showed the potential for significant enhancement in source efficiency of up to 60% for the dual-pulse system. Significantly higher CE gains might be possible with optimization of the pre-pulse and main pulse parameters and source size.

Motor development in individuals with congenital adrenal hyperplasia: strength, targeting, and fine motor skill.

PubMed

Collaer, Marcia L; Brook, Charles G D; Conway, Gerard S; Hindmarsh, Peter C; Hines, Melissa

2009-02-01

This study investigated early androgen influence on the development of human motor and visuomotor characteristics. Participants, ages 12-45 years, were individuals with congenital adrenal hyperplasia (CAH), a disorder causing increased adrenal androgen production before birth (40 females, 29 males) and their unaffected relatives (29 females, 30 males). We investigated grip strength and visuomotor targeting tasks on which males generally outperform females, and fine motor pegboard tasks on which females generally outperform males. Physical characteristics (height and weight) were measured to explore whether body parameters could explain differences in motor skills. Females with CAH were stronger and showed better targeting than unaffected females and showed reduced fine visuomotor skill on one pegboard measure, with no difference on the other. Males with CAH were weaker than unaffected males in grip strength but did not differ on the targeting or pegboard measures. Correction for body size could not explain the findings for females, but suggests that the reduced strength of males with CAH may relate to their smaller stature. Further, the targeting advantage in females with CAH persisted following adjustment for their greater strength. Results in females support the hypothesis that androgen may masculinize, or promote, certain motor characteristics at which males excel, and contribute to defeminization of certain fine motor characteristics at which females excel. Thus, these data suggest that organizational effects of androgens on behavior during prenatal life may extend to motor characteristics and may contribute to general sex differences in motor-related behaviors; however, alternative explanations based on activational influences of androgen or altered experiential factors cannot be excluded without further study.

Problems and Limitations of Satellite Image Orientation for Determination of Height Models

NASA Astrophysics Data System (ADS)

Jacobsen, K.

2017-05-01

The usual satellite image orientation is based on bias corrected rational polynomial coefficients (RPC). The RPC are describing the direct sensor orientation of the satellite images. The locations of the projection centres today are without problems, but an accuracy limit is caused by the attitudes. Very high resolution satellites today are very agile, able to change the pointed area over 200km within 10 to 11 seconds. The corresponding fast attitude acceleration of the satellite may cause a jitter which cannot be expressed by the third order RPC, even if it is recorded by the gyros. Only a correction of the image geometry may help, but usually this will not be done. The first indication of jitter problems is shown by systematic errors of the y-parallaxes (py) for the intersection of corresponding points during the computation of ground coordinates. These y-parallaxes have a limited influence to the ground coordinates, but similar problems can be expected for the x-parallaxes, determining directly the object height. Systematic y-parallaxes are shown for Ziyuan-3 (ZY3), WorldView-2 (WV2), Pleiades, Cartosat-1, IKONOS and GeoEye. Some of them have clear jitter effects. In addition linear trends of py can be seen. Linear trends in py and tilts in of computed height models may be caused by limited accuracy of the attitude registration, but also by bias correction with affinity transformation. The bias correction is based on ground control points (GCPs). The accuracy of the GCPs usually does not cause some limitations but the identification of the GCPs in the images may be difficult. With 2-dimensional bias corrected RPC-orientation by affinity transformation tilts of the generated height models may be caused, but due to large affine image deformations some satellites, as Cartosat-1, have to be handled with bias correction by affinity transformation. Instead of a 2-dimensional RPC-orientation also a 3-dimensional orientation is possible, respecting the object height more as by 2-dimensional orientation. The 3-dimensional orientation showed advantages for orientation based on a limited number of GCPs, but in case of poor GCP distribution it may cause also negative effects. For some of the used satellites the bias correction by affinity transformation showed advantages, but for some other the bias correction by shift was leading to a better levelling of the generated height models, even if the root mean square (RMS) differences at the GCPs were larger as for bias correction by affinity transformation. The generated height models can be analyzed and corrected with reference height models. For the used data sets accurate reference height models are available, but an analysis and correction with the free of charge available SRTM digital surface model (DSM) or ALOS World 3D (AW3D30) is also possible and leads to similar results. The comparison of the generated height models with the reference DSM shows some height undulations, but the major accuracy influence is caused by tilts of the height models. Some height model undulations reach up to 50 % of the ground sampling distance (GSD), this is not negligible but it cannot be seen not so much at the standard deviations of the height. In any case an improvement of the generated height models is possible with reference height models. If such corrections are applied it compensates possible negative effects of the type of bias correction or 2-dimensional orientations against 3-dimensional handling.

Effects of Different Cutting Height on Nutritional Quality of Whole Crop Barley Silage and Feed Value on Hanwoo Heifers.

PubMed

Kim, Dong Hyeon; Amanullah, Sardar M; Lee, Hyuk Jun; Joo, Young Ho; Han, Ouk Kyu; Adesogan, Adegbola T; Kim, Sam Churl

2016-09-01

The present study evaluated the effects of different cutting height on nutritive value, fermentation quality, in vitro and in vivo digestibility of whole crop barley silage. Whole crop barley forage (Yuyeon hybrid) was harvested at height of 5, 10, and 15 cm from the ground level. Each cutting height was rolled to make round bale and ensiled for 100 days. After 100 days of ensiling, pH of silage was lower (p<0.05) in 5 cm, but no difference between 10 and 15 cm of cutting height. The content of lactate and lactate to acetate ratio were increased (p<0.05) in 5 cm of cutting height, whereas the acetate content was higher (p<0.05) in 10 and 15 cm than that of 5 cm cutting height. Aerobic stability was greater (p<0.05) in silages of 10 and 15 cm of cutting height. Three total mixed rations (TMR) were formulated with silages from the three different cutting heights (TMR5, TMR10, and TMR15) incorporated as forage at 70:30 ratio with concentrate (dry matter [DM] basis). In vitro dry matter digestibility was higher (p<0.05) in the TMR5 and TMR10 than that in TMR15, whereas in vitro neutral detergent fiber digestibility was higher (p<0.05) in the TMR10 and TMR15 than that in TMR5. Concentration of NH3-N was highest (p<0.05) in the TMR10 followed by TMR15 and TMR5. Total volatile fatty acid was decreased (p<0.05) with increased cutting height. The digestibility of DM and neutral detergent fiber were highest (p<0.05) in TMR15, than those in TMR5 and TMR10, whereas acid detergent fiber digestibility was higher (p<0.05) in TMR5 than that in TMR10. The results showed that increasing cutting height, at least up to 10 to 15 cm, of whole crop barley forage at harvest (Yuyeon) may be beneficial for making silage for TMR formulation and increasing digestibility of DM and NDF.

Effects of Different Cutting Height on Nutritional Quality of Whole Crop Barley Silage and Feed Value on Hanwoo Heifers

PubMed Central

Kim, Dong Hyeon; Amanullah, Sardar M.; Lee, Hyuk Jun; Joo, Young Ho; Han, Ouk Kyu; Adesogan, Adegbola T.; Kim, Sam Churl

2016-01-01

The present study evaluated the effects of different cutting height on nutritive value, fermentation quality, in vitro and in vivo digestibility of whole crop barley silage. Whole crop barley forage (Yuyeon hybrid) was harvested at height of 5, 10, and 15 cm from the ground level. Each cutting height was rolled to make round bale and ensiled for 100 days. After 100 days of ensiling, pH of silage was lower (p<0.05) in 5 cm, but no difference between 10 and 15 cm of cutting height. The content of lactate and lactate to acetate ratio were increased (p<0.05) in 5 cm of cutting height, whereas the acetate content was higher (p<0.05) in 10 and 15 cm than that of 5 cm cutting height. Aerobic stability was greater (p<0.05) in silages of 10 and 15 cm of cutting height. Three total mixed rations (TMR) were formulated with silages from the three different cutting heights (TMR5, TMR10, and TMR15) incorporated as forage at 70:30 ratio with concentrate (dry matter [DM] basis). In vitro dry matter digestibility was higher (p<0.05) in the TMR5 and TMR10 than that in TMR15, whereas in vitro neutral detergent fiber digestibility was higher (p<0.05) in the TMR10 and TMR15 than that in TMR5. Concentration of NH3-N was highest (p<0.05) in the TMR10 followed by TMR15 and TMR5. Total volatile fatty acid was decreased (p<0.05) with increased cutting height. The digestibility of DM and neutral detergent fiber were highest (p<0.05) in TMR15, than those in TMR5 and TMR10, whereas acid detergent fiber digestibility was higher (p<0.05) in TMR5 than that in TMR10. The results showed that increasing cutting height, at least up to 10 to 15 cm, of whole crop barley forage at harvest (Yuyeon) may be beneficial for making silage for TMR formulation and increasing digestibility of DM and NDF. PMID:27165022

High-NA optical CD metrology on small in-cell targets enabling improved higher order dose control and process control for logic

NASA Astrophysics Data System (ADS)

Cramer, Hugo; Mc Namara, Elliott; van Laarhoven, Rik; Jaganatharaja, Ram; de la Fuente, Isabel; Hsu, Sharon; Belletti, Filippo; Popadic, Milos; Tu, Ward; Huang, Wade

2017-03-01

The logic manufacturing process requires small in-device metrology targets to exploit the full dose correction potential of the modern scanners and process tools. A high-NA angular resolved scatterometer (YieldStar S-1250D) was modified to demonstrate the possibility of OCD measurements on 5x5µm2 targets. The results obtained on test wafers in a logic manufacturing environment, measured after litho and after core etch, showed a good correlation to larger reference targets and AEI to ADI intra-field CDU correlation, thereby demonstrating the feasibility of OCD on such small targets. The data was used to determine a reduction potential of 55% for the intra-field CD variation, using 145 points per field on a few inner fields, and 33% of the process induced across wafer CD variation using 16 points per field full wafer. In addition, the OCD measurements reveal valuable information on wafer-to-wafer layer height variations within a lot.

Projectile-target mixing in melted ejecta formed during a hypervelocity impact cratering event

NASA Technical Reports Server (NTRS)

Evans, Noreen Joyce; Ahrens, Thomas J.; Shahinpoor, M.; Anderson, W. W.

1993-01-01

Tektites contain little to no projectile contamination while, in contrast, some distal ejecta deposits can be relatively projectile-rich (e.g. the Cretaceous-Tertiary (K-T) boundary clay). This compositional difference motivated an experimental study of hypervelocity target-projectile mixing processes. We hope to scale up the results from these experiments and apply them to terrestrial impact structures like the Chicxulub Crater, Yucutan, Mexico, the leading contender as the site for the impact that caused the mass extinction that marks the K-T boundary. Shock decomposition of the approximately 500m thickness of anhydrite, or greater thickness of limestone, in the target rocks at Chicxulub may have been a critical mechanism for either global cooling via SO3, and subsequently H2SO4, formation, or possibly, global warming via increased CO2 formation. Understanding target-projectile mixing processes during hypervelocity impact may permit more accurate estimates of the amount of potentially toxic, target-derived material reaching stratospheric heights.

Corrections for the effects of significant wave height and attitude on Geosat radar altimeter measurements

NASA Technical Reports Server (NTRS)

Hayne, G. S.; Hancock, D. W., III

1990-01-01

Range estimates from a radar altimeter have biases which are a function of the significant wave height (SWH) and the satellite attitude angle (AA). Based on results of prelaunch Geosat modeling and simulation, a correction for SWH and AA was already applied to the sea-surface height estimates from Geosat's production data processing. By fitting a detailed model radar return waveform to Geosat waveform sampler data, it is possible to provide independent estimates of the height bias, the SWH, and the AA. The waveform fitting has been carried out for 10-sec averages of Geosat waveform sampler data over a wide range of SWH and AA values. The results confirm that Geosat sea-surface-height correction is good to well within the original dm-level specification, but that an additional height correction can be made at the level of several cm.

Biomechanical evaluation of injury severity associated with patient falls from bed.

PubMed

Bowers, Bonnie; Lloyd, John; Lee, W; Powell-Cope, G; Baptiste, A

2008-01-01

This study investigated the severity of injuries associated with falling from bed and the effectiveness of injury-prevention strategies. Injury criteria were calculated for head- and feet-first falls from six bed heights onto a tiled surface and floor mat. These values indicated a 25% chance of experiencing a serious head injury as a result of falling feet-first from a bed height of 97.5 cm onto a tiled surface. Risk of injury increased to 40% when extrapolated for the height added by bedrails. Using a floor mat decreased this risk to less than 1% for bedrail height for feet-first falls. Calculated impact forces indicated a risk of skull fracture when hitting the tiled surface. Floor mats and height-adjustable beds positioned to the lowest height should be used to decrease the risk of injury associated with falling from bed.

The Effects of Temperature and CO2-induced Acidification on Skeletal Morphology of the Tropical Reef-building Coral Siderastrea siderea

NASA Astrophysics Data System (ADS)

Cobleigh, K.

2016-02-01

Coral reefs are threatened by increasing sea surface temperatures and decreasing surface seawater pH. Although numerous experimental studies have examined the effects of these global scale stressors on corals, few have quantified the effects of temperature and acidification on coral skeletal morphology. We conducted controlled laboratory experiments to investigate the effects of temperature (25, 28, 32°C) and CO2-induced ocean acidification (pCO2 = 324, 477, 604, 2553 µatm) on skeletal morphology of the highly resilient Caribbean reef-building coral Siderastrea siderea over a 95-day interval. Post-treatment S. siderea corallites from nearshore, backreef, and forereef colonies were imaged via stereo microscopy to evaluate impact of warming and acidification on corallite height and infilling. Both an increase and decrease in temperature relative to the control (i.e., near-present-day temperatures) resulted in increased corallite height but decreased skeletal infilling. In contrast, corals reared under the lowest (i.e., pre-industrial) and highest pCO2 treatments (i.e., extreme pCO2) exhibited both decreased corallite height and skeletal infilling relative to the control. We observed no difference in corallite height or infilling across reef zones, either within or across treatments. Interestingly, the warming projected for the end of the 21st century (32°C) resulted in increased corallite height and reduced corallite infilling. Acidification projected for the same interval (pCO2 = 604 µatm) also resulted in increased corallite height and decreased infilling. Collectively, our results suggest that these two global stressors will result in S. siderea corallites that are taller yet less infilled by the end of the 21st century. Changes in S. siderea arising from warming and acificiation may exacerbate observed declines in coral health across Caribbean reef systems.

Impact of long-term treatment of methylphenidate on height and weight of school age children with ADHD.

PubMed

Zhang, H; Du, M; Zhuang, S

2010-08-01

Stimulant-associated growth deficits in children with attention deficit hyperactivity disorder (ADHD) have long been a concern. We chose 146 school age children diagnosed with ADHD being treated with methylphenidate (MPH) and 29 drug-free ADHD children, and followed them up for 2-4 years. We recorded the changes in height and weight after long-term methylphenidate treatment and analyzed the influence of confounding factors to growth in height, weight, and height velocity. The change of the gap between patients' height and mean height in the methylphenidate group was -1.86+/-0.82 cm ( P<0.001); in controls it was -0.26+/-0.51 cm ( P<0.05). The changes of height standard deviation score (SDS) in the methylphenidate group and controls were -0.14+/-0.23 SD ( P<0.001) and +0.05+/-0.10 SD ( P<0.05), respectively. The differences between the 2 groups were significant ( P<0.001). Both correlation and regression analyses indicated that the duration of treatment contributed significantly to the variance in change of height ( P<0.001). The height velocity was significantly attenuated in the first year. The change of the gap between the patients' weight and weight for height after methylphenidate was -0.14+/-1.25 kg ( P>0.05). From this study, a small but significant deceleration of height velocity has been identified as a long-term side effect of methylphenidate, the magnitude of the height deficit is related to the duration of treatment. Methylphenidate had no significant influence on weight and BMI values. Georg Thieme Verlag KG Stuttgart.New York.

Dissection of the genetic architecture underlying the plant density response by mapping plant height-related traits in maize (Zea mays L.).

PubMed

Ku, Lixia; Zhang, Liangkun; Tian, Zhiqiang; Guo, Shulei; Su, Huihui; Ren, Zhenzhen; Wang, Zhiyong; Li, Guohui; Wang, Xiaobo; Zhu, Yuguang; Zhou, Jinlong; Chen, Yanhui

2015-08-01

Plant height is one of the most heritable traits in maize (Zea mays L.). Understanding the genetic control of plant height is important for elucidating the molecular mechanisms that regulate maize development. To investigate the genetic basis of the plant height response to density in maize, we evaluated the effects of two different plant densities (60,000 and 120,000 plant/hm(2)) on three plant height-related traits (plant height, ear height, and ear height-to-plant height ratio) using four sets of recombinant inbred line populations. The phenotypes observed under the two-plant density treatments indicated that high plant density increased the phenotypic performance values of the three measured traits. Twenty-three quantitative trait loci (QTLs) were detected under the two-plant density treatments, and five QTL clusters were located. Nine QTLs were detected under the low plant density treatment, and seven QTLs were detected under the high plant density treatment. Our results suggested that plant height may be controlled mainly by a common set of genes that could be influenced by additional genetic mechanisms when the plants were grown under high plant density. Fine mapping for genetic regions of the stable QTLs across different plant density environments may provide additional information about their different responses to density. The results presented here provide useful information for further research and will help to reveal the molecular mechanisms related to plant height in response to density.

Carrier Transport and Effective Barrier Height of Low Resistance Metal Contact to Highly Mg-Doped p-GaN

NASA Astrophysics Data System (ADS)

Park, Youngjun; Kim, Hyunsoo

2011-08-01

The effective barrier height and carrier transport mechanism of low resistance Ag-based contact to highly Mg-doped p-GaN were investigated. The specific contact resistance obtained was as low as 7.0×10-4 Ω cm2. The electrical resistivity of p-GaN was found to increase depending on ˜T-1/4, indicating variable-range hopping (VRH) conduction through Mg-related deep-level defects. Based on the VRH conduction model, the effective barrier height for carrier transport could be measured as 0.12 eV, which is low enough to explain the formation of excellent ohmic contact. The deep-level defects were also found to induce surface Fermi pinning.

Study of Semi-Span Model Testing Techniques

NASA Technical Reports Server (NTRS)

Gatlin, Gregory M.; McGhee, Robert J.

1996-01-01

An investigation has been conducted in the NASA Langley 14- by 22-Foot Subsonic Tunnel in order to further the development of semi-span testing capabilities. A twin engine, energy efficient transport (EET) model with a four-element wing in a takeoff configuration was used for this investigation. Initially a full span configuration was tested and force and moment data, wing and fuselage surface pressure data, and fuselage boundary layer measurements were obtained as a baseline data set. The semi-span configurations were then mounted on the wind tunnel floor, and the effects of fuselage standoff height and shape as well as the effects of the tunnel floor boundary layer height were investigated. The effectiveness of tangential blowing at the standoff/floor juncture as an active boundary-layer control technique was also studied. Results indicate that the semi-span configuration was more sensitive to variations in standoff height than to variations in floor boundary layer height. A standoff height equivalent to 30 percent of the fuselage radius resulted in better correlation with full span data than no standoff or the larger standoff configurations investigated. Undercut standoff leading edges or the use of tangential blowing in the standoff/ floor juncture improved correlation of semi-span data with full span data in the region of maximum lift coefficient.

The Effects of Manual Therapy Using Joint Mobilization and Flexion-distraction Techniques on Chronic Low Back Pain and Disc Heights

PubMed Central

Choi, Jioun; Hwangbo, Gak; Park, Jungseo; Lee, Sangyong

2014-01-01

[Purpose] The purpose of this study was to examine the effects of manual therapy using joint mobilization and flexion-distraction techniques on chronic low back pain and disc heights. [Subjects] This study was conducted with 31 chronic low back pain patients who were divided into a manual therapy group (MTG; n=16) and a spinal decompression therapy group (SDTG; n=15). [Methods] The MTG was treated using joint mobilization techniques and flexion-distraction techniques, and the SDTG was treated using spinal decompression therapeutic apparatuses. Conservative physical therapy was used in both groups, and the therapy was implemented three times per week for 6 weeks. The visual analog scale (VAS) was used to measure patient’s low back pain scores, and a picture archiving and communication system was used to measure disc height by comparing and analyzing the images. [Results] In comparisons of the VAS within each of the two groups, both the MTG and the SDTG showed significant decreases. In comparisons of disc height within each of the two groups, the MTG showed statistically significant increases. [Conclusion] Manual therapy using joint mobilization techniques and flexion-distraction techniques is considered an effective intervention for addressing low back pain and disc heights in patients with chronic low back pain. PMID:25202191

Neuromuscular and technical abilities related to age in water-polo players.

PubMed

De Siati, Fabio; Laffaye, Guillaume; Gatta, Giorgio; Dello Iacono, Antonio; Ardigò, Luca Paolo; Padulo, Johnny

2016-08-01

Testing is one of the important tasks in any multi-step sport programme. In most ball games, coaches assess motor, physical and technical skills on a regular basis in early stages of talent identification in order to further athletes' development. The purpose of the study was to investigate anthropometric variables and vertical jump heights as a free throw effectiveness predictor in water-polo players of different age groups. Two hundred and thirty-six young (10-18 years) male water-polo players partitioned into three age groups underwent anthropometric variables' measures and squat- and countermovement-jump tests, and performed water-polo free throws. Anthropometric variables, vertical jump heights and throw speed - as a proxy for free throw effectiveness - resulted different over age groups. Particularly, throw speed changed from 9.28 to 13.70 m · s(-1) (+48%) from younger to older players. A multiple-regression model indicated that body height, squat-jump height and throw time together explain 52% of variance of throw speed. In conclusion, tall height, high lower limb power and throwing quickness appeared to be relevant determinants for effective free throws. Such indications can help coaches during talent identification and development processes, even by means of novel training strategies. Further research is needed over different maturity statuses.

Mean wind speed below building height in residential neighborhoods with different tree densities

Treesearch

G.M. Heisler

1990-01-01

There is little available knowledge of the absolute or relative effects of trees and buildings on wind at or below building height in residential neighborhoods. In this study, mean wind speed was measured at a height of 6.6 ft (2 m) in neighborhoods of single-family houses. BuIlding densities ranged between 6% and 12% of the land ares, and tree-cover densities were...

The Effect of Arch Height and Material Hardness of Personalized Insole on Correction and Tissues of Flatfoot

PubMed Central

Su, Shonglun; Mo, Zhongjun; Guo, Junchao

2017-01-01

Flat foot is one of the common deformities in the youth population, seriously affecting the weight supporting and daily exercising. However, there is lacking of quantitative data relative to material selection and shape design of the personalized orthopedic insole. This study was to evaluate the biomechanical effects of material hardness and support height of personalized orthopedic insole on foot tissues, by in vivo experiment and finite element modeling. The correction of arch height increased with material hardness and support height. The peak plantar pressure increased with the material hardness, and these values by wearing insoles of 40° were apparently higher than the bare feet condition. Harder insole material results in higher stress in the joint and ligament stress than softer material. In the calcaneocuboid joint, the stress increased with the arch height of insoles. The material hardness did not apparently affect the stress in the ankle joints, but the support heights of insole did. In general, insole material and support design are positively affecting the correction of orthopedic insole, but negatively resulting in unreasonable stress on the stress in the joint and ligaments. There should be an integration of improving correction and reducing stress in foot tissues. PMID:29065655

Therapeutic Efficacy and Safety of GH in Japanese Children with Down Syndrome Short Stature Accompanied by GH Deficiency.

PubMed

Meguri, Kyoko; Inoue, Masaru; Narahara, Koji; Sato, Takahiro; Takata, Ami; Ohki, Nobuhiko; Ozono, Keiichi

2013-10-01

In this study, we investigated the effects of GH treatment in children with Down syndrome who had been diagnosed with GH deficiency (GHD). A total of 20 subjects were investigated in this study. Fourteen Down syndrome children (5 boys and 9 girls) with short stature due to GHD were treated with GH at Okayama Red Cross General Hospital, and 6 Down syndrome children (4 boys and 2 girls) with short stature due to GHD were registered in the Pfizer International Growth Database (KIGS). Height SD score (SDS) increased throughout the three-year GH treatment period. The overall mean height SDS increased from -3.5 at baseline to -2.5 after 3 yr of treatment. The mean change in height SDS during these 3 yr was 1.1. In addition, height assessment of SD score based on Down syndrome-specific growth data in the Japanese population revealed that the height SDS (Down syndrome) also increased across the 3-yr GH treatment period. The mean change in height SDS (Down syndrome) during these three years was 1.3. GH therapy was effective for Down syndrome short stature accompanied by GHD, and no new safety concerns were found in this study.

The effects of radiation therapy on height and spine MRI characteristics in children with neuroblastoma.

PubMed

Yu, Jeong Il; Lim, Do Hoon; Jung, Sang Hoon; Sung, Ki Woong; Yoo, So-Young; Nam, Heerim

2015-03-01

To investigate the effect of radiotherapy (RT) on height and spine using magnetic resonance imaging (MRI) analysis in children with neuroblastoma and to identify parameters related to patient height. We performed a retrospective cohort study of neuroblastoma patients treated between January 1997 and December 2007. Twenty-seven children were enrolled. Whole spine MRI was completed and height percentiles were compared with national growth charts. The median ages were 28, 43, and 126 months at diagnosis, RT, and analysis, respectively. All of the enrolled children received local RT, and 15 patients received total body irradiation (TBI). Median growth percentiles were 67.0, 54.0, and 4.9 at diagnosis, RT, and analysis, respectively. The number of irradiated vertebrae (P=0.009) and having undergone TBI (P=0.03) were significantly associated with shorter stature. Among the MRI parameters for irradiated vertebrae, signal intensity was higher (P=0.05) and more heterogeneous (P=0.02) in T1-weighted images and roundness was lower (P=0.03) in T2-weighted images. Height of children with neuroblastoma was significantly affected by RT. The number of irradiated vertebrae and having undergone TBI were significantly associated with lower height. Irradiated spine showed changes in both signal and shape on MRI. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

The effect of step height on the performance of three-dimensional ac electro-osmotic microfluidic pumps.

PubMed

Urbanski, John Paul; Levitan, Jeremy A; Burch, Damian N; Thorsen, Todd; Bazant, Martin Z

2007-05-15

Recent numerical and experimental studies have investigated the increase in efficiency of microfluidic ac electro-osmotic pumps by introducing nonplanar geometries with raised steps on the electrodes. In this study, we analyze the effect of the step height on ac electro-osmotic pump performance. AC electro-osmotic pumps with three-dimensional electroplated steps are fabricated on glass substrates and pumping velocities of low ionic strength electrolyte solutions are measured systematically using a custom microfluidic device. Numerical simulations predict an improvement in pump performance with increasing step height, at a given frequency and voltage, up to an optimal step height, which qualitatively matches the trend observed in experiment. For a broad range of step heights near the optimum, the observed flow is much faster than with existing planar pumps (at the same voltage and minimum feature size) and in the theoretically predicted direction of the "fluid conveyor belt" mechanism. For small step heights, the experiments also exhibit significant flow reversal at the optimal frequency, which cannot be explained by the theory, although the simulations predict weak flow reversal at higher frequencies due to incomplete charging. These results provide insight to an important parameter for the design of nonplanar electro-osmotic pumps and clues to improve the fundamental theory of ACEO.

Identification, Replication, and Fine-Mapping of Loci Associated with Adult Height in Individuals of African Ancestry

PubMed Central

Ge, Bing; Tayo, Bamidele; Mathias, Rasika A.; Ding, Jingzhong; Nalls, Michael A.; Adeyemo, Adebowale; Adoue, Véronique; Ambrosone, Christine B.; Atwood, Larry; Bandera, Elisa V.; Becker, Lewis C.; Berndt, Sonja I.; Bernstein, Leslie; Blot, William J.; Boerwinkle, Eric; Britton, Angela; Casey, Graham; Chanock, Stephen J.; Demerath, Ellen; Deming, Sandra L.; Diver, W. Ryan; Fox, Caroline; Harris, Tamara B.; Hernandez, Dena G.; Hu, Jennifer J.; Ingles, Sue A.; John, Esther M.; Johnson, Craig; Keating, Brendan; Kittles, Rick A.; Kolonel, Laurence N.; Kritchevsky, Stephen B.; Le Marchand, Loic; Lohman, Kurt; Liu, Jiankang; Millikan, Robert C.; Murphy, Adam; Musani, Solomon; Neslund-Dudas, Christine; North, Kari E.; Nyante, Sarah; Ogunniyi, Adesola; Ostrander, Elaine A.; Papanicolaou, George; Patel, Sanjay; Pettaway, Curtis A.; Press, Michael F.; Redline, Susan; Rodriguez-Gil, Jorge L.; Rotimi, Charles; Rybicki, Benjamin A.; Salako, Babatunde; Schreiner, Pamela J.; Signorello, Lisa B.; Singleton, Andrew B.; Stanford, Janet L.; Stram, Alex H.; Stram, Daniel O.; Strom, Sara S.; Suktitipat, Bhoom; Thun, Michael J.; Witte, John S.; Yanek, Lisa R.; Ziegler, Regina G.; Zheng, Wei; Zhu, Xiaofeng; Zmuda, Joseph M.; Zonderman, Alan B.; Evans, Michele K.; Liu, Yongmei; Becker, Diane M.; Cooper, Richard S.; Pastinen, Tomi; Henderson, Brian E.; Hirschhorn, Joel N.; Lettre, Guillaume; Haiman, Christopher A.

2011-01-01

Adult height is a classic polygenic trait of high heritability (h 2 ∼0.8). More than 180 single nucleotide polymorphisms (SNPs), identified mostly in populations of European descent, are associated with height. These variants convey modest effects and explain ∼10% of the variance in height. Discovery efforts in other populations, while limited, have revealed loci for height not previously implicated in individuals of European ancestry. Here, we performed a meta-analysis of genome-wide association (GWA) results for adult height in 20,427 individuals of African ancestry with replication in up to 16,436 African Americans. We found two novel height loci (Xp22-rs12393627, P = 3.4×10−12 and 2p14-rs4315565, P = 1.2×10−8). As a group, height associations discovered in European-ancestry samples replicate in individuals of African ancestry (P = 1.7×10−4 for overall replication). Fine-mapping of the European height loci in African-ancestry individuals showed an enrichment of SNPs that are associated with expression of nearby genes when compared to the index European height SNPs (P<0.01). Our results highlight the utility of genetic studies in non-European populations to understand the etiology of complex human diseases and traits. PMID:21998595

Effect of inhomogeneous Schottky barrier height of SnO2 nanowires device

NASA Astrophysics Data System (ADS)

Amorim, Cleber A.; Bernardo, Eric P.; Leite, Edson R.; Chiquito, Adenilson J.

2018-05-01

The current–voltage (I–V) characteristics of metal–semiconductor junction (Au–Ni/SnO2/Au–Ni) Schottky barrier in SnO2 nanowires were investigated over a wide temperature range. By using the Schottky–Mott model, the zero bias barrier height Φ B was estimated from I–V characteristics, and it was found to increase with increasing temperature; on the other hand the ideality factor (n) was found to decrease with increasing temperature. The variation in the Schottky barrier and n was attributed to the spatial inhomogeneity of the Schottky barrier height. The experimental I–V characteristics exhibited a Gaussian distribution having mean barrier heights {\\overline{{{Φ }}}}B of 0.30 eV and standard deviation σ s of 60 meV. Additionally, the Richardson modified constant was obtained to be 70 A cm‑2 K‑2, leading to an effective mass of 0.58m 0. Consequently, the temperature dependence of I–V characteristics of the SnO2 nanowire devices can be successfully explained on the Schottky–Mott theory framework taking into account a Gaussian distribution of barrier heights.

Value of Magnetic Resonance Imaging Without or With Applicator in Place for Target Definition in Cervix Cancer Brachytherapy.

PubMed

Pötter, Richard; Federico, Mario; Sturdza, Alina; Fotina, Irina; Hegazy, Neamat; Schmid, Maximilian; Kirisits, Christian; Nesvacil, Nicole

2016-03-01

To define, in the setting of cervical cancer, to what extent information from additional pretreatment magnetic resonance imaging (MRI) without the brachytherapy applicator improves conformity of CT-based high-risk clinical target volume (CTVHR) contours, compared with the MRI for various tumor stages (International Federation of Gynecology and Obstetrics [FIGO] stages I-IVA). The CTVHR was contoured in 39 patients with cervical cancer (FIGO stages I-IVA) (1) on CT images based on clinical information (CTVHR-CTClinical) alone; and (2) using an additional MRI before brachytherapy, without the applicator (CTVHR-CTpre-BT MRI). The CT contours were compared with reference contours on MRI with the applicator in place (CTVHR-MRIref). Width, height, thickness, volumes, and topography were analyzed. The CT-MRIref differences hardly varied in stage I tumors (n=8). In limited-volume stage IIB and IIIB tumors (n=19), CTVHR-CTpre-BT MRI-MRIref volume differences (2.6 cm(3) [IIB], 7.3 cm(3) [IIIB]) were superior to CTVHR-CTClinical-MRIref (11.8 cm(3) [IIB], 22.9 cm(3) [IIIB]), owing to significant improvement of height and width (P<.05). In advanced disease (n=12), improved agreement with MR volume, width, and height was achieved for CTVHR-CTpre-BT MRI. In 5 of 12 cases, MRIref contours were partly missed on CT. Pre-BT MRI helps to define CTVHR before BT implantation appropriately, if only CT images with the applicator in place are available for BT planning. Significant improvement is achievable in limited-volume stage IIB and IIIB tumors. In more advanced disease (extensive IIB to IVA), improvement of conformity is possible but may be associated with geographic misses. Limited impact on precision of CTVHR-CT is expected in stage IB tumors. Copyright © 2016 Elsevier Inc. All rights reserved.

ALART: a novel lidar system for vegetation height retrieval from space

NASA Astrophysics Data System (ADS)

Foglia Manzillo, P.; van Dijk, C. N.; Conticello, S.; Esposito, M.; Lussana, R.; Villa, F.; Tamborini, D.; Zappa, F.; Tosi, A.; Roncat, A.; Pfeiffer, N.; Entner, T.; Lampridis, D.

2015-10-01

We propose a multi-kHz Single-Photon Counting (SPC) space LIDAR, exploiting low energy pulses with high repetition frequency (PRF). The high PRF allows one to overcome the low signal limitations, as many return shots can be collected from nearly the same scattering area. The ALART space instrument exhibits a multi-beam design, providing height retrieval over a wide area and terrain slope measurements. This novel technique, working with low SNRs, allows multiple beam generation with a single laser, limiting mass and power consumption. As the receiver has a certain probability to detect multiple photons from different levels of canopy, a histogram is constructed and used to retrieve the properties of the target tree, by means of a modal decomposition of the reconstructed waveform. A field demonstrator of the ALART space instrument is currently being developed by a European consortium led by cosine | measurement systems and funded by ESA under the TRP program. The demonstrator requirements have been derived to be representative of the target instrument and it will be tested in an equipped tower in woodland areas in the Netherlands. The employed detectors are state-of-the-art CMOS Single-Photon Avalanche Diode (SPAD) matrices with 1024 pixels. Each pixel is independently equipped with an integrated Time-to-Digital Converter (TDC), achieving a timing accuracy that is much lower than the SPAD dead time, resulting in a distance resolution in the centimeter range. The instrument emits nanosecond laser pulses with energy on the order of several μJ, at a PRF of ~ 10 kHz, and projects on ground a three-beams pattern. An extensive field measurement campaign will validate the employed technologies and algorithms for vegetation height retrieval.