Liquid Hydrogen Target Experience at SLAC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weisend, J.G.; Boyce, R.; Candia, A.

2005-08-29

Liquid hydrogen targets have played a vital role in the physics program at SLAC for the past 40 years. These targets have ranged from small ''beer can'' targets to the 1.5 m long E158 target that was capable of absorbing up to 800 W without any significant density changes. Successful use of these targets has required the development of thin wall designs, liquid hydrogen pumps, remote positioning and alignment systems, safety systems, control and data acquisition systems, cryogenic cooling circuits and heat exchangers. Detailed operating procedures have been created to ensure safety and operational reliability. This paper surveys the evolutionmore » of liquid hydrogen targets at SLAC and discusses advances in several of the enabling technologies that made these targets possible.« less

Bullet Trap Feasibility Assessment and Implementation Plan. (Technology Identification).

DTIC Science & Technology

1996-03-01

reduce costs, perhaps one of their premier assets is income generation . Projectiles fired into and recovered from TEC System products can be resold...ombat shooting scenarios with up to 15 individual targets as far away as 300 yards. Page 7 \\IEUMATIC TARGET SYSTEMS gt reliable . portable and... SYYSTEM ] 3DULAR BALLISTIC PANELS (MBPs) A~rking with recycled rubber tire products, DUE- RON has created the proprietary MBP System ,or use in the

Application of whole genome shotgun sequencing for detection and characterization of genetically modified organisms and derived products.

PubMed

Holst-Jensen, Arne; Spilsberg, Bjørn; Arulandhu, Alfred J; Kok, Esther; Shi, Jianxin; Zel, Jana

2016-07-01

The emergence of high-throughput, massive or next-generation sequencing technologies has created a completely new foundation for molecular analyses. Various selective enrichment processes are commonly applied to facilitate detection of predefined (known) targets. Such approaches, however, inevitably introduce a bias and are prone to miss unknown targets. Here we review the application of high-throughput sequencing technologies and the preparation of fit-for-purpose whole genome shotgun sequencing libraries for the detection and characterization of genetically modified and derived products. The potential impact of these new sequencing technologies for the characterization, breeding selection, risk assessment, and traceability of genetically modified organisms and genetically modified products is yet to be fully acknowledged. The published literature is reviewed, and the prospects for future developments and use of the new sequencing technologies for these purposes are discussed.

Creating Educational Opportunities for Engineers with Communication Technologies.

ERIC Educational Resources Information Center

Baldwin, Lionel V.

The large number and known career patterns of engineers make them an important target population for the use of videotechnology in programs of continuing professional education. Currently, universities use videobased instruction with engineering students on and off campus. A variety of signal delivery systems are used to link job sites to…

Method for replicating an array of nucleic acid probes

DOEpatents

Cantor, Charles R.; Przetakiewicz, Marek; Smith, Cassandra L.; Sano, Takeshi

1998-01-01

The invention relates to the replication of probe arrays and methods for replicating arrays of probes which are useful for the large scale manufacture of diagnostic aids used to screen biological samples for specific target sequences. Arrays created using PCR technology may comprise probes with 5'- and/or 3'-overhangs.

CSU Digital Ambassadors: An Empowering and Impactful Faculty Learning Community

ERIC Educational Resources Information Center

Soodjinda, Daniel; Parker, Jessica K.; Ross, Donna L.; Meyer, Elizabeth J.

2014-01-01

This article chronicles the work of the California State University Digital Ambassador Program (DA), a Faculty Learning Community (FLC), which brought together 13 faculty members across the state to create ongoing, targeted spaces of support for colleagues and educational partners to learn about innovative technological and pedagogical practices…

Advances in Targeted Pesticides with Environmentally Responsive Controlled Release by Nanotechnology

PubMed Central

Huang, Bingna; Chen, Feifei; Shen, Yue; Wang, Yan; Sun, Changjiao; Zhao, Xiang; Cui, Bo; Gao, Fei; Zeng, Zhanghua; Cui, Haixin

2018-01-01

Pesticides are the basis for defending against major biological disasters and important for ensuring national food security. Biocompatible, biodegradable, intelligent, and responsive materials are currently an emerging area of interest in the field of efficient, safe, and green pesticide formulation. Using nanotechnology to design and prepare targeted pesticides with environmentally responsive controlled release via compound and chemical modifications has also shown great potential in creating novel formulations. In this review, special attention has been paid to intelligent pesticides with precise controlled release modes that can respond to micro-ecological environment changes such as light-sensitivity, thermo-sensitivity, humidity sensitivity, soil pH, and enzyme activity. Moreover, establishing intelligent and controlled pesticide release technologies using nanomaterials are reported. These technologies could increase pesticide-loading, improve the dispersibility and stability of active ingredients, and promote target ability. PMID:29439498

The Internet information infrastructure: Terrorist tool or architecture for information defense?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kadner, S.; Turpen, E.; Rees, B.

The Internet is a culmination of information age technologies and an agent of change. As with any infrastructure, dependency upon the so-called global information infrastructure creates vulnerabilities. Moreover, unlike physical infrastructures, the Internet is a multi-use technology. While information technologies, such as the Internet, can be utilized as a tool of terror, these same technologies can facilitate the implementation of solutions to mitigate the threat. In this vein, this paper analyzes the multifaceted nature of the Internet information infrastructure and argues that policymakers should concentrate on the solutions it provides rather than the vulnerabilities it creates. Minimizing risks and realizingmore » possibilities in the information age will require institutional activities that translate, exploit and convert information technologies into positive solutions. What follows is a discussion of the Internet information infrastructure as it relates to increasing vulnerabilities and positive potential. The following four applications of the Internet will be addressed: as the infrastructure for information competence; as a terrorist tool; as the terrorist`s target; and as an architecture for rapid response.« less

Method for replicating an array of nucleic acid probes

DOEpatents

Cantor, C.R.; Przetakiewicz, M.; Smith, C.L.; Sano, T.

1998-08-18

The invention relates to the replication of probe arrays and methods for replicating arrays of probes which are useful for the large scale manufacture of diagnostic aids used to screen biological samples for specific target sequences. Arrays created using PCR technology may comprise probes with 5{prime}- and/or 3{prime}-overhangs. 16 figs.

ESTE Project Brief: Environmental and Sustainable Technology Evaluations (ESTE): Verification of Qualitative Spot Test Kits for Lead in Paint

EPA Science Inventory

On April 22, 2008, EPA issued the final Lead; Renovation, Repair, and Painting (RRP) Program Rule. The rule addresses lead-based paint hazards created by renovation, repair, and painting activities that disturb lead-based paint in target housing and child-occupied facilities. Und...

Hitting the Moving Target: Challenges of Creating a Dynamic Curriculum Addressing the Ethical Dimensions of Geospatial Data

ERIC Educational Resources Information Center

Carr, John; Vallor, Shannon; Freundschuh, Scott; Gannon, William L.; Zandbergen, Paul

2014-01-01

While established ethical norms and core legal principles concerning the protection of privacy may be easily identified, applying these standards to rapidly evolving digital information technologies, markets for digital information and convulsive changes in social understandings of privacy is increasingly challenging. This challenge has been…

Getting to low-cost algal biofuels: A monograph on conventional and cutting-edge harvesting and extraction technologies

DOE PAGES

Coons, James E.; Kalb, Daniel M.; Dale, Taraka; ...

2014-08-31

Among the most formidable challenges to algal biofuels is the ability to harvest algae and extract intracellular lipids at low cost and with a positive energy balance. Here, we construct two paradigms that contrast energy requirements and costs of conventional and cutting-edge Harvesting and Extraction (H&E) technologies. By application of the parity criterion and the moderate condition reference state, an energy–cost paradigm is created that allows 1st stage harvesting technologies to be compared with easy reference to the National Alliance for Advanced Biofuels and Bioproducts (NAABB) target of $0.013/gallon of gasoline equivalent (GGE) and to the U.S. DOE's Bioenergy Technologiesmore » Office 2022 cost metrics. Drawing from the moderate condition reference state, a concentration-dependency paradigm is developed for extraction technologies, making easier comparison to the National Algal Biofuels Technology Roadmap (NABTR) target of less than 10% total energy. This monograph identifies cost-bearing factors for a variety of H&E technologies, describes a design basis for ultrasonic harvesters, and provides a framework to measure future technological advancements toward reducing H&E costs. Finally, we show that ultrasonic harvesters and extractors are uniquely capable of meeting both NAABB and NABTR targets. Ultrasonic technologies require further development and scale-up before they can achieve low-cost performance at industrially relevant scales. But, the advancement of this technology would greatly reduce H&E costs and accelerate the commercial viability of algae-based biofuels.« less

Desktop supercomputer: what can it do?

NASA Astrophysics Data System (ADS)

Bogdanov, A.; Degtyarev, A.; Korkhov, V.

2017-12-01

The paper addresses the issues of solving complex problems that require using supercomputers or multiprocessor clusters available for most researchers nowadays. Efficient distribution of high performance computing resources according to actual application needs has been a major research topic since high-performance computing (HPC) technologies became widely introduced. At the same time, comfortable and transparent access to these resources was a key user requirement. In this paper we discuss approaches to build a virtual private supercomputer available at user's desktop: a virtual computing environment tailored specifically for a target user with a particular target application. We describe and evaluate possibilities to create the virtual supercomputer based on light-weight virtualization technologies, and analyze the efficiency of our approach compared to traditional methods of HPC resource management.

[Artificial Intelligence in Drug Discovery].

PubMed

Fujiwara, Takeshi; Kamada, Mayumi; Okuno, Yasushi

2018-04-01

According to the increase of data generated from analytical instruments, application of artificial intelligence(AI)technology in medical field is indispensable. In particular, practical application of AI technology is strongly required in "genomic medicine" and "genomic drug discovery" that conduct medical practice and novel drug development based on individual genomic information. In our laboratory, we have been developing a database to integrate genome data and clinical information obtained by clinical genome analysis and a computational support system for clinical interpretation of variants using AI. In addition, with the aim of creating new therapeutic targets in genomic drug discovery, we have been also working on the development of a binding affinity prediction system for mutated proteins and drugs by molecular dynamics simulation using supercomputer "Kei". We also have tackled for problems in a drug virtual screening. Our developed AI technology has successfully generated virtual compound library, and deep learning method has enabled us to predict interaction between compound and target protein.

Transforming Ordinary Buildings into Smart Buildings via Low-Cost, Self-Powering Wireless Sensors & Sensor Networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feng, Philip

The research objective of this project is to design and demonstrate a low-cost, compact, easy-to-deploy, maintenance-free sensor node technology, and a network of such sensors, which enable the monitoring of multiphysical parameters and can transform today’s ordinary buildings into smart buildings with environmental awareness. We develop the sensor node and network via engineering and integration of existing technologies, including high-efficiency mechanical energy harvesting, and ultralow-power integrated circuits (ICs) for sensing and wireless communication. Through integration and innovative power management via specifically designed low-power control circuits for wireless sensing applications, and tailoring energy-harvesting components to indoor applications, the target products willmore » have smaller volume, higher efficiency, and much lower cost (in both manufacturing and maintenance) than the baseline technology. Our development and commercialization objective is to create prototypes for our target products under the CWRU-Intwine collaboration.« less

Guidance from the Graphical User Interface (GUI) Experience: What GUI Teaches about Technology Access.

ERIC Educational Resources Information Center

National Council on Disability, Washington, DC.

This report investigates the use of the graphical user interface (GUI) in computer programs, the problems it creates for individuals with visual impairments or blindness, and advocacy efforts concerning this issue, which have been targeted primarily at Microsoft, producer of Windows. The report highlights the concerns of individuals with visual…

Protein painting reveals solvent-excluded drug targets hidden within native protein–protein interfaces

PubMed Central

Luchini, Alessandra; Espina, Virginia; Liotta, Lance A.

2014-01-01

Identifying the contact regions between a protein and its binding partners is essential for creating therapies that block the interaction. Unfortunately, such contact regions are extremely difficult to characterize because they are hidden inside the binding interface. Here we introduce protein painting as a new tool that employs small molecules as molecular paints to tightly coat the surface of protein–protein complexes. The molecular paints, which block trypsin cleavage sites, are excluded from the binding interface. Following mass spectrometry, only peptides hidden in the interface emerge as positive hits, revealing the functional contact regions that are drug targets. We use protein painting to discover contact regions between the three-way interaction of IL1β ligand, the receptor IL1RI and the accessory protein IL1RAcP. We then use this information to create peptides and monoclonal antibodies that block the interaction and abolish IL1β cell signalling. The technology is broadly applicable to discover protein interaction drug targets. PMID:25048602

Agroterrorism, Biological Crimes, and Biological Warfare Targeting Animal Agriculture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, Terry M.; Logan-Henfrey, Linda; Weller, Richard E.

2000-04-12

There is a rising level of concern that agriculture might be targeted for economic sabotage by terrorists. Knowledge gathered about the Soviet Union biological weapons program and Iraq following the Gulf War, confirmed that animals and agricultural crops were targets of bioweapon development. These revelations are particularly disturbing in light of the fact that both countries are States Parties to the Biological and Toxin Weapons Convention that entered into force in 1975. The potential for misusing biotechnology to create more virulent pathogens and the lack of international means to detect unethical uses of new technologies to create destructive bioweapons ismore » of increasing concern. Disease outbreaks, whether naturally occurring or intentionally, involving agricultural pathogens that destroy livestock and crops would have a profound impact on a country's infrastructure, economy and export markets. This chapter deals with the history of agroterrorism, biological crimes and biological warfare directed toward animal agriculture, specifically, horses, cattle, swine, sheep, goats, and poultry.« less

CRISPR guide RNA design for research applications.

PubMed

Mohr, Stephanie E; Hu, Yanhui; Ewen-Campen, Benjamin; Housden, Benjamin E; Viswanatha, Raghuvir; Perrimon, Norbert

2016-09-01

The rapid rise of CRISPR as a technology for genome engineering and related research applications has created a need for algorithms and associated online tools that facilitate design of on-target and effective guide RNAs (gRNAs). Here, we review the state of the art in CRISPR gRNA design for research applications of the CRISPR-Cas9 system, including knockout, activation, and inhibition. Notably, achieving good gRNA design is not solely dependent on innovations in CRISPR technology. Good design and design tools also rely on availability of high-quality genome sequence and gene annotations, as well as on availability of accumulated data regarding off-targets and effectiveness metrics. © 2016 The Authors. The FEBS Journal published by John Wiley & Sons Ltd on behalf of Federation of European Biochemical Societies.

Multimode electromagnetic target discriminator: preliminary data results

NASA Astrophysics Data System (ADS)

Black, Christopher J.; McMichael, Ian T.; Nelson, Carl V.

2004-09-01

This paper describes the Multi-mode Electromagnetic Target Discriminator (METD) sensor and presents preliminary results from recent field experiments. The METD sensor was developed for the US Army RDECOM NVESD by The Johns Hopkins University Applied Physics Laboratory. The METD, based on the technology of the previously developed Electromagnetic Target Discriminator (ETD), is a spatial scanning electromagnetic induction (EMI) sensor that uses both the time-domain (TD) and the frequency-domain (FD) for target detection and classification. Data is collected with a custom data acquisition system and wirelessly transmitted to a base computer. We show that the METD has a high signal-to-noise ratio (SNR), the ability to detect voids created by plastic anti-tank (AT) mines, and is practical for near real-time data processing.

RNAi Experiments in D. melanogaster: Solutions to the Overlooked Problem of Off-Targets Shared by Independent dsRNAs

PubMed Central

Seinen, Erwin; Burgerhof, Johannes G. M.; Jansen, Ritsert C.; Sibon, Ody C. M.

2010-01-01

Background RNAi technology is widely used to downregulate specific gene products. Investigating the phenotype induced by downregulation of gene products provides essential information about the function of the specific gene of interest. When RNAi is applied in Drosophila melanogaster or Caenorhabditis elegans, often large dsRNAs are used. One of the drawbacks of RNAi technology is that unwanted gene products with sequence similarity to the gene of interest can be down regulated too. To verify the outcome of an RNAi experiment and to avoid these unwanted off-target effects, an additional non-overlapping dsRNA can be used to down-regulate the same gene. However it has never been tested whether this approach is sufficient to reduce the risk of off-targets. Methodology We created a novel tool to analyse the occurance of off-target effects in Drosophila and we analyzed 99 randomly chosen genes. Principal Findings Here we show that nearly all genes contain non-overlapping internal sequences that do show overlap in a common off-target gene. Conclusion Based on our in silico findings, off-target effects should not be ignored and our presented on-line tool enables the identification of two RNA interference constructs, free of overlapping off-targets, from any gene of interest. PMID:20957038

Texas Hydrogen Education Final Scientific/Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hitchcock, David; Bullock, Dan

2011-06-30

The Texas Hydrogen Education project builds on past interest in hydrogen and fuel cells to help create better informed leaders and stakeholders and thereby improve decision making and planning for inclusion of hydrogen and fuel cell technologies as energy alternatives in Texas. In past years in Texas, there was considerable interest and activities about hydrogen and fuel cells (2000-­2004). During that time, the Houston Advanced Research Center (HARC) created a fuel cell consortium and a fuel cell testing lab. Prior to 2008, interest and activities had declined substantially. In 2008, in cooperation with the Texas H2 Coalition and the Statemore » Energy Conservation Office, HARC conducted a planning process to create the Texas Hydrogen Roadmap. It was apparent from analysis conducted during the course of this process that while Texas has hydrogen and fuel cell advantages, there was little program and project activity as compared with other key states. Outreach and education through the provision of informational materials and organizing meetings was seen as an effective way of reaching decision makers in Texas. Previous hydrogen projects in Texas had identified the five major urban regions for program and project development. This geographic targeting approach was adopted for this project. The project successfully conducted the five proposed workshops in four of the target metropolitan areas: San Antonio, Houston, Austin, and the Dallas-­Ft. Worth area. In addition, eight outreach events were included to further inform state and local government leaders on the basics of hydrogen and fuel cell technologies. The project achieved its primary objectives of developing communication with target audiences and assembling credible and consistent outreach and education materials. The major lessons learned include: (1) DOE’s Clean Cities programs are a key conduit to target transportation audiences, (2) real-­world fuel cell applications (fuel cell buses, fuel cell fork lifts, and hydrogen fueling) are effective for engaging target audiences, and (3) a clear path forward is needed for state and local agencies interested in project implementation (funding, financing, preliminary design, technical assistance, etc.).« less

Genetically engineered livestock for agriculture: a generation after the first transgenic animal research conference.

PubMed

Murray, James D; Maga, Elizabeth A

2016-06-01

At the time of the first Transgenic Animal Research Conference, the lack of knowledge about promoter, enhancer and coding regions of genes of interest greatly hampered our efforts to create transgenes that would express appropriately in livestock. Additionally, we were limited to gene insertion by pronuclear microinjection. As predicted then, widespread genome sequencing efforts and technological advancements have profoundly altered what we can do. There have been many developments in technology to create transgenic animals since we first met at Granlibakken in 1997, including the advent of somatic cell nuclear transfer-based cloning and gene editing. We can now create new transgenes that will express when and where we want and can target precisely in the genome where we want to make a change or insert a transgene. With the large number of sequenced genomes, we have unprecedented access to sequence information including, control regions, coding regions, and known allelic variants. These technological developments have ushered in new and renewed enthusiasm for the production of transgenic animals among scientists and animal agriculturalists around the world, both for the production of more relevant biomedical research models as well as for agricultural applications. However, even though great advancements have been made in our ability to control gene expression and target genetic changes in our animals, there still are no genetically engineered animal products on the market for food. World-wide there has been a failure of the regulatory processes to effectively move forward. Estimates suggest the world will need to increase our current food production 70 % by 2050; that is we will have to produce the total amount of food each year that has been consumed by mankind over the past 500 years. The combination of transgenic animal technology and gene editing will become increasingly more important tools to help feed the world. However, to date the practical benefits of these technologies have not yet reached consumers in any country and in the absence of predictable, science-based regulatory programs it is unlikely that the benefits will be realized in the short to medium term.

Phage display: concept, innovations, applications and future.

PubMed

Pande, Jyoti; Szewczyk, Magdalena M; Grover, Ashok K

2010-01-01

Phage display is the technology that allows expression of exogenous (poly)peptides on the surface of phage particles. The concept is simple in principle: a library of phage particles expressing a wide diversity of peptides is used to select those that bind the desired target. The filamentous phage M13 is the most commonly used vector to create random peptide display libraries. Several methods including recombinant techniques have been developed to increase the diversity of the library. On the other extreme, libraries with various biases can be created for specific purposes. For instance, when the sequence of the peptide that binds the target is known, its affinity and selectivity can be increased by screening libraries created with limited mutagenesis of the peptide. Phage libraries are screened for binding to synthetic or native targets. The initial screening of library by basic biopanning has been extended to column chromatography including negative screening and competition between selected phage clones to identify high affinity ligands with greater target specificity. The rapid isolation of specific ligands by phage display is advantageous in many applications including selection of inhibitors for the active and allosteric sites of the enzymes, receptor agonists and antagonists, and G-protein binding modulatory peptides. Phage display has been used in epitope mapping and analysis of protein-protein interactions. The specific ligands isolated from phage libraries can be used in therapeutic target validation, drug design and vaccine development. Phage display can also be used in conjunction with other methods. The past innovations and those to come promise a bright future for this field. Copyright © 2010 Elsevier Inc. All rights reserved.

Cells from icons to symbols: molecularizing cell biology in the 1980s.

PubMed

Serpente, Norberto

2011-12-01

Over centuries cells have been the target of optical and electronic microscopes as well as others technologies, with distinctive types of visual output. Whilst optical technologies produce images 'evident to the eye', the electronic and especially the molecular create images that are more elusive to conceptualization and assessment. My study applies the semiotic approach to the production of images in cell biology to capture the shift from microscopic images to non-traditional visual technologies around 1980. Here I argue that the visual shift that coincides with the growing dominance of molecular biology involves a change from iconic to symbolic forms. Copyright © 2011 Elsevier Ltd. All rights reserved.

Interactions of double patterning technology with wafer processing, OPC and design flows

NASA Astrophysics Data System (ADS)

Lucas, Kevin; Cork, Chris; Miloslavsky, Alex; Luk-Pat, Gerry; Barnes, Levi; Hapli, John; Lewellen, John; Rollins, Greg; Wiaux, Vincent; Verhaegen, Staf

2008-03-01

Double patterning technology (DPT) is one of the main options for printing logic devices with half-pitch less than 45nm; and flash and DRAM memory devices with half-pitch less than 40nm. DPT methods decompose the original design intent into two individual masking layers which are each patterned using single exposures and existing 193nm lithography tools. The results of the individual patterning layers combine to re-create the design intent pattern on the wafer. In this paper we study interactions of DPT with lithography, masks synthesis and physical design flows. Double exposure and etch patterning steps create complexity for both process and design flows. DPT decomposition is a critical software step which will be performed in physical design and also in mask synthesis. Decomposition includes cutting (splitting) of original design intent polygons into multiple polygons where required; and coloring of the resulting polygons. We evaluate the ability to meet key physical design goals such as: reduce circuit area; minimize rework; ensure DPT compliance; guarantee patterning robustness on individual layer targets; ensure symmetric wafer results; and create uniform wafer density for the individual patterning layers.

Utilizing Computer and Multimedia Technology in Generating Choreography for the Advanced Dance Student at the High School Level.

ERIC Educational Resources Information Center

Griffin, Irma Amado

This study describes a pilot program utilizing various multimedia computer programs on a MacQuadra 840 AV. The target group consisted of six advanced dance students who participated in the pilot program within the dance curriculum by creating a database of dance movement using video and still photography. The students combined desktop publishing,…

Military Application of Apiculture: The (Other) Nature of War

DTIC Science & Technology

2011-03-30

cybernetic organisms, cyborgs , out of bees and other insects. The objective is to control the cyborgs ’ flight and motions by remote control. Used individually...or in swarms, cyborgs could potentially conduct reconnaissance missions, deliver toxins, collect intelligence, track targets, and retrieve samples...develop technology to create cybernetic organisms, cyborgs , out of bees arid other insects. The objective is to control the cyborgs1 flight and

A system for the measurement of gene targeting efficiency in human cell lines using an antibiotic resistance-GFP fusion gene.

PubMed

Konishi, Yuko; Karnan, Sivasundaram; Takahashi, Miyuki; Ota, Akinobu; Damdindorj, Lkhagvasuren; Hosokawa, Yoshitaka; Konishi, Hiroyuki

2012-09-01

Gene targeting in a broad range of human somatic cell lines has been hampered by inefficient homologous recombination. To improve this technology and facilitate its widespread application, it is critical to first have a robust and efficient research system for measuring gene targeting efficiency. Here, using a fusion gene consisting of hygromycin B phosphotransferase and 3'-truncated enhanced GFP (HygR-5' EGFP) as a reporter gene, we created a molecular system monitoring the ratio of homologous to random integration (H/R ratio) of targeting vectors into the genome. Cell clones transduced with a reporter vector containing HygR-5' EGFP were efficiently established from two human somatic cell lines. Established HygR-5' EGFP reporter clones retained their capacity to monitor gene targeting efficiency for a longer duration than a conventional reporter system using an unfused 5' EGFP gene. With the HygR-5' EGFP reporter system, we reproduced previous findings of gene targeting frequency being up-regulated by the use of an adeno-associated viral (AAV) backbone, a promoter-trap system, or a longer homology arm in a targeting vector, suggesting that this system accurately monitors H/R ratio. Thus, our HygR-5' EGFP reporter system will assist in the development of an efficient AAV-based gene targeting technology.

Genome Editing in Rats Using TALE Nucleases.

PubMed

Tesson, Laurent; Remy, Séverine; Ménoret, Séverine; Usal, Claire; Thinard, Reynald; Savignard, Chloé; De Cian, Anne; Giovannangeli, Carine; Concordet, Jean-Paul; Anegon, Ignacio

2016-01-01

The rat is an important animal model to understand gene function and model human diseases. Since recent years, the development of gene-specific nucleases has become important for generating new rat models of human diseases, to analyze the role of genes and to generate human antibodies. Transcription activator-like (TALE) nucleases efficiently create gene-specific knockout rats and lead to the possibility of gene targeting by homology-directed recombination (HDR) and generating knock-in rats. We describe a detailed protocol for generating knockout and knock-in rats via microinjection of TALE nucleases into fertilized eggs. This technology is an efficient, cost- and time-effective method for creating new rat models.

Scratch-Resistant Lenses

NASA Technical Reports Server (NTRS)

1996-01-01

Lewis Research Center developed a process for achieving diamond- hard coatings for aerospace systems. The technique involves coating the material with a film of diamond-like carbon (DLC) using direct ion deposition. An ion generator creates a stream of ions from a hydrocarbon gas source; the carbon ions impinge directly on the target substrate and 'grow' into a thin DLC film. In 1988, Air Products and Chemicals, Inc. received a license to the NASA patent. Diamonex, an Air Products spinoff company, further developed the NASA process to create the DiamondHard technology used on the Bausch & Lomb Ray- Ban Survivors sunglasses. The sunglasses are scratch-resistant and shed water more easily, thus reducing spotting.

Laser-induced artificial fulgurites

NASA Astrophysics Data System (ADS)

Bidin, Noriah; Marsin Sanagi, Mohd; Farah, Mohammed; Naqiuddin Razali, M.; Khamis, Jamil

2018-07-01

Fulgurite is a natural glass created by lightning. Naturally it can be found at beaches or in deserts. Artificial fulgurite is created by immersing high-voltage electrodes in a tab of sand. Commonly, fulgurite is of interest among geoscientists, but its applications are still unknown. In the present paper, the concept of natural fulgurite generation is simulated to induce artificial fulgurite. Instead of lightning, a high-power laser beam is used as a source of transient heating. Syntactic sand from agrowaste is used as target material. Artificial fulgurite is generated after transient heating from a laser beam. The benefit of this finding can be used to extract silica from rice husk ash using laser technology.

Recent Advances in Genome Editing Using CRISPR/Cas9.

PubMed

Ding, Yuduan; Li, Hong; Chen, Ling-Ling; Xie, Kabin

2016-01-01

The CRISPR (clustered regularly interspaced short palindromic repeat)-Cas9 (CRISPR-associated nuclease 9) system is a versatile tool for genome engineering that uses a guide RNA (gRNA) to target Cas9 to a specific sequence. This simple RNA-guided genome-editing technology has become a revolutionary tool in biology and has many innovative applications in different fields. In this review, we briefly introduce the Cas9-mediated genome-editing method, summarize the recent advances in CRISPR/Cas9 technology, and discuss their implications for plant research. To date, targeted gene knockout using the Cas9/gRNA system has been established in many plant species, and the targeting efficiency and capacity of Cas9 has been improved by optimizing its expression and that of its gRNA. The CRISPR/Cas9 system can also be used for sequence-specific mutagenesis/integration and transcriptional control of target genes. We also discuss off-target effects and the constraint that the protospacer-adjacent motif (PAM) puts on CRISPR/Cas9 genome engineering. To address these problems, a number of bioinformatic tools are available to help design specific gRNAs, and new Cas9 variants and orthologs with high fidelity and alternative PAM specificities have been engineered. Owing to these recent efforts, the CRISPR/Cas9 system is becoming a revolutionary and flexible tool for genome engineering. Adoption of the CRISPR/Cas9 technology in plant research would enable the investigation of plant biology at an unprecedented depth and create innovative applications in precise crop breeding.

Exploiting CRISPR-Cas nucleases to produce sequence-specific antimicrobials.

PubMed

Bikard, David; Euler, Chad W; Jiang, Wenyan; Nussenzweig, Philip M; Goldberg, Gregory W; Duportet, Xavier; Fischetti, Vincent A; Marraffini, Luciano A

2014-11-01

Antibiotics target conserved bacterial cellular pathways or growth functions and therefore cannot selectively kill specific members of a complex microbial population. Here, we develop programmable, sequence-specific antimicrobials using the RNA-guided nuclease Cas9 (refs.1,2) delivered by a bacteriophage. We show that Cas9, reprogrammed to target virulence genes, kills virulent, but not avirulent, Staphylococcus aureus. Reprogramming the nuclease to target antibiotic resistance genes destroys staphylococcal plasmids that harbor antibiotic resistance genes and immunizes avirulent staphylococci to prevent the spread of plasmid-borne resistance genes. We also show that CRISPR-Cas9 antimicrobials function in vivo to kill S. aureus in a mouse skin colonization model. This technology creates opportunities to manipulate complex bacterial populations in a sequence-specific manner.

Remanent Activation in the Mini-SHINE Experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Micklich, Bradley J.

2015-04-16

Argonne National Laboratory is assisting SHINE Medical Technologies in developing a domestic source of the medical isotope 99Mo through the fission of low-enrichment uranium in a uranyl sulfate solution. In Phase 2 of these experiments, electrons from a linear accelerator create neutrons by interacting in a depleted uranium target, and these neutrons are used to irradiate the solution. The resulting neutron and photon radiation activates the target, the solution vessels, and a shielded cell that surrounds the experimental apparatus. When the experimental campaign is complete, the target must be removed into a shielding cask, and the experimental components must bemore » disassembled. The radiation transport code MCNPX and the transmutation code CINDER were used to calculate the radionuclide inventories of the solution, the target assembly, and the shielded cell, and to determine the dose rates and shielding requirements for selected removal scenarios for the target assembly and the solution vessels.« less

Development of medicine-intended isotope production technologies at Yerevan Physics Institute

NASA Astrophysics Data System (ADS)

Avetisyan, Albert; Avagyan, Robert; Kerobyan, Ivetta; Dallakyan, Ruben; Harutyunyan, Gevorg; Melkonyan, Aleksandr

2015-05-01

Accelerator-based 99mTc and 123I isotopes production technologies were created and developed at A.Alikhanyan National Science Laboratory (former Yerevan Physics Institute - YerPhI). The method involves the irradiation of natural molybdenum (for 99mTc production) and natural xenon (for 123I production) using high-intensity bremsstrahlung photons from the electron beam of the LUE50 linear electron accelerator located at the YerPhI. We have developed and tested the extraction of 99mTc and 123I from the irradiated natural MoO3 and natural Xe, respectively. The production method has been developed and shown to be successful. The current activity is devoted to creation and development of the technology of direct production 99mTc on the 100Mo as target materials using the proton beam from an IBA C18/18 cyclotron. The proton cyclotron C18/18 (producer - IBA, Belgium) was purchased and will be installed nearby AANL (YerPhI) till end 2014. The 18 MeV protons will be used to investigate accelerator-based schemes for the direct production of 99mTc. Main topics of studies will include experimental measurement of 99mTc production yield for different energies of protons, irradiation times, intensities, development of new methods of 99mTc extraction from irradiated materials, development of target preparation technology, development of target material recovery methods for multiple use and others.

Traditional and New Influenza Vaccines

PubMed Central

Wong, Sook-San

2013-01-01

SUMMARY The challenges in successful vaccination against influenza using conventional approaches lie in their variable efficacy in different age populations, the antigenic variability of the circulating virus, and the production and manufacturing limitations to ensure safe, timely, and adequate supply of vaccine. The conventional influenza vaccine platform is based on stimulating immunity against the major neutralizing antibody target, hemagglutinin (HA), by virus attenuation or inactivation. Improvements to this conventional system have focused primarily on improving production and immunogenicity. Cell culture, reverse genetics, and baculovirus expression technology allow for safe and scalable production, while adjuvants, dose variation, and alternate routes of delivery aim to improve vaccine immunogenicity. Fundamentally different approaches that are currently under development hope to signal new generations of influenza vaccines. Such approaches target nonvariable regions of antigenic proteins, with the idea of stimulating cross-protective antibodies and thus creating a “universal” influenza vaccine. While such approaches have obvious benefits, there are many hurdles yet to clear. Here, we discuss the process and challenges of the current influenza vaccine platform as well as new approaches that are being investigated based on the same antigenic target and newer technologies based on different antigenic targets. PMID:23824369

Nanoparticles that reshape the tumor milieu create a therapeutic window for effective T cell therapy in solid malignancies.

PubMed

Zhang, Fan; Stephan, Sirkka B; Ene, Chibawanye I; Smith, Tyrel T; Holland, Eric C; Stephan, Matthias T

2018-05-14

A major obstacle to the success rate of chimeric antigen receptor (CAR-) T cell therapy against solid tumors is the microenvironment antagonistic to T cells that solid tumors create. Conventional checkpoint blockade can silence lymphocyte anti-survival pathways activated by tumors, but because they are systemic, these treatments disrupt immune homeostasis and induce autoimmune side effects. Thus, new technologies are required to remodel the tumor milieu without causing systemic toxicities. Here we demonstrate that targeted nanocarriers that deliver a combination of immune-modulatory agents can remove pro-tumor cell populations and simultaneously stimulate anti-tumor effector cells. We administered repeated infusions of lipid nanoparticles coated with the tumor-targeting peptide iRGD and loaded with a combination of a PI3K inhibitor to inhibit immune-suppressive tumor cells and an alpha-GalCer agonist of therapeutic T cells to synergistically sway the tumor microenvironment of solid tumors from suppressive to stimulatory. This treatment created a therapeutic window of two weeks, enabling tumor-specific CAR-T cells to home to the lesion, undergo robust expansion, and trigger tumor regression. CAR-T cells administered outside this therapeutic window had no curative effect. The lipid nanoparticles we used are easy to manufacture in substantial amounts, and we demonstrate that repeated infusions of them are safe. Our technology may therefore provide a practical and low-cost strategy to potentiate many cancer immunotherapies used to treat solid tumors, including T cell therapy, vaccines, and BITE platforms. Copyright ©2018, American Association for Cancer Research.

Targeted Technology Transfer to US Independents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donald F. Duttlinger; E. Lance Cole

2006-09-29

The Petroleum Technology Transfer Council (PTTC) was established by domestic crude oil and natural gas producers in 1994 as a national not-for-profit organization to address the increasingly urgent need to improve the technology-transfer process in the U.S. upstream petroleum industry. Coordinated from a Headquarters (HQ) office in Houston, PTTC maintains an active grassroots program executed by 10 Regional Lead Organizations (RLOs) and two satellite offices (Figure 1). Regional Directors interact with domestic oil and gas producers through technology workshops, resource centers, websites, newsletters, technical publications and cooperative outreach efforts. HQ facilitates inter-regional technology transfer and implements a comprehensive communications program.more » Active volunteers on the National Board and in Producer Advisory Groups (PAGs) in each of the 10 regions focus effort in areas that will create the most impact for domestic producers. Focused effort by dedicated individuals across the country has enabled PTTC to achieve the milestones outlined in Appendix A.« less

Development of Multi-Disciplinary Finite Element Method Analysis Courses at California State University, Los Angeles

NASA Technical Reports Server (NTRS)

McKinney, John; Wu, Chivey

1998-01-01

The NASA Dryden Flight Research Center (DFRC) Partnership Awards Grant to California State University, Los Angeles (CSULA) has two primary goals that help to achieve NASA objectives. The overall objectives of the NASA Partnership Awards are to create opportunities for joint University NASA/Government sponsored research and related activities. One of the goals of the grant is to have university faculty researchers participate and contribute to the development of NASA technology that supports NASA goals for research and development (R&D) in Aeronautics and Astronautics. The other goal is technology transfer in the other direction, where NASA developed technology is made available to the general public and more specifically, targeted to industries that can profit from utilization of government developed technology. This years NASA Dryden Partnership Awards grant to CSULA entitled, "Computer Simulation of Multi-Disciplinary Engineering Systems", has two major tasks that satisfy overall NASA objectives. The first task conducts basic and applied research that contributes to technology development at the Dryden Flight Research Center. The second part of the grant provides for dissemination of NASA developed technology, by using the teaching environment created in the CSULA classroom. The second task and how this is accomplished is the topic of this paper. The NASA STARS (Structural Analysis Routines) computer simulation program is used at the Dryden center to support flight testing of high-performance experimental aircraft and to conduct research and development of new and advanced Aerospace technology.

Ligand-directed profiling of organelles with internalizing phage libraries

PubMed Central

Dobroff, Andrey S.; Rangel, Roberto; Guzman-Roja, Liliana; Salmeron, Carolina C.; Gelovani, Juri G.; Sidman, Richard L.; Bologa, Cristian G.; Oprea, Tudor I.; Brinker, C. Jeffrey; Pasqualini, Renata; Arap, Wadih

2015-01-01

Phage display is a resourceful tool to, in an unbiased manner, discover and characterize functional protein-protein interactions, to create vaccines, and to engineer peptides, antibodies, and other proteins as targeted diagnostic and/or therapeutic agents. Recently, our group has developed a new class of internalizing phage (iPhage) for ligand-directed targeting of organelles and/or to identify molecular pathways within live cells. This unique technology is suitable for applications ranging from fundamental cell biology to drug development. Here we describe the method for generating and screening the iPhage display system, and explain how to select and validate candidate internalizing homing peptide. PMID:25640897

Patient centric drug product design in modern drug delivery as an opportunity to increase safety and effectiveness.

PubMed

Stegemann, Sven

2018-06-01

The advances in drug delivery technologies have enabled pharmaceutical scientists to deliver a drug through various administration routes and optimize the drug release and absorption. The wide range of drug delivery systems and dosage forms represent a toolbox of technology for the development of pharmaceutical drug products but might also be a source of medication errors and nonadherence. Patient centric drug product development is being suggested as an important factor to increase therapeutic outcomes. Areas covered: Patients have impaired health and potentially disabilities and they are not medical or pharmaceutical experts but are requested to manage complex therapeutic regimens. As such the application of technology should also serve to reduce complexity, build on patients' intuition and ease of use. Patients form distinct populations based on the targeted disease, disease cluster or age group with specific characteristics or therapeutic contexts. Expert opinion: Establishing a target product and patient profile is essential to guide drug product design development. Including the targeted patient populations in the process is a prerequisite to achieve patient-centric pharmaceutical drug product design. Addressing the needs early on in the product design process, will create more universal design, avoiding the necessity for multiple product presentations to cover the different patient populations.

ATOM - Accelerating therapeutics through opportunities in medicine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mcmahon, Benjamin Hamilton; Dotson, Paul Jeffrey

Create a new paradigm of drug discovery that would reduce the time from an identified drug target to clinical candidate from the current ~6 years to just 12 months. ATOM will develop, test, and validate a multidisciplinary approach to drug discovery in which modern science, technology and engineering, supercomputing, simulations, data science, and artificial intelligence are highly integrated into a single drug-discovery platform that can ultimately be shared with the drug development community at-large.

Simulink-aided Design and Implementation of Sensorless BLDC Motor Digital Control System

NASA Astrophysics Data System (ADS)

Zhilenkov, A. A.; Tsvetkov, Y. N.; Chistov, V. B.; Nyrkov, A. P.; Sokolov, S. S.

2017-07-01

The paper describes the process of creating of brushless direct current motor’s digital control system. The target motor has no speed sensor, so back-EMF method is used for commutation control. Authors show how to model the control system in MatLab/Simulink and to test it onboard STM32F4 microcontroller.This technology allows to create the most flexible system, which will control possible with a personal computer by communication lines. It is possible to examine the signals in the circuit of the actuator without any external measuring instruments - testers, oscilloscopes, etc. - and output waveforms and measured values of signals directly on the host PC.

Recent Advances in Genome Editing Using CRISPR/Cas9

PubMed Central

Ding, Yuduan; Li, Hong; Chen, Ling-Ling; Xie, Kabin

2016-01-01

The CRISPR (clustered regularly interspaced short palindromic repeat)-Cas9 (CRISPR-associated nuclease 9) system is a versatile tool for genome engineering that uses a guide RNA (gRNA) to target Cas9 to a specific sequence. This simple RNA-guided genome-editing technology has become a revolutionary tool in biology and has many innovative applications in different fields. In this review, we briefly introduce the Cas9-mediated genome-editing method, summarize the recent advances in CRISPR/Cas9 technology, and discuss their implications for plant research. To date, targeted gene knockout using the Cas9/gRNA system has been established in many plant species, and the targeting efficiency and capacity of Cas9 has been improved by optimizing its expression and that of its gRNA. The CRISPR/Cas9 system can also be used for sequence-specific mutagenesis/integration and transcriptional control of target genes. We also discuss off-target effects and the constraint that the protospacer-adjacent motif (PAM) puts on CRISPR/Cas9 genome engineering. To address these problems, a number of bioinformatic tools are available to help design specific gRNAs, and new Cas9 variants and orthologs with high fidelity and alternative PAM specificities have been engineered. Owing to these recent efforts, the CRISPR/Cas9 system is becoming a revolutionary and flexible tool for genome engineering. Adoption of the CRISPR/Cas9 technology in plant research would enable the investigation of plant biology at an unprecedented depth and create innovative applications in precise crop breeding. PMID:27252719

Collaborative environments for capability-based planning

NASA Astrophysics Data System (ADS)

McQuay, William K.

2005-05-01

Distributed collaboration is an emerging technology for the 21st century that will significantly change how business is conducted in the defense and commercial sectors. Collaboration involves two or more geographically dispersed entities working together to create a "product" by sharing and exchanging data, information, and knowledge. A product is defined broadly to include, for example, writing a report, creating software, designing hardware, or implementing robust systems engineering and capability planning processes in an organization. Collaborative environments provide the framework and integrate models, simulations, domain specific tools, and virtual test beds to facilitate collaboration between the multiple disciplines needed in the enterprise. The Air Force Research Laboratory (AFRL) is conducting a leading edge program in developing distributed collaborative technologies targeted to the Air Force's implementation of systems engineering for a simulation-aided acquisition and capability-based planning. The research is focusing on the open systems agent-based framework, product and process modeling, structural architecture, and the integration technologies - the glue to integrate the software components. In past four years, two live assessment events have been conducted to demonstrate the technology in support of research for the Air Force Agile Acquisition initiatives. The AFRL Collaborative Environment concept will foster a major cultural change in how the acquisition, training, and operational communities conduct business.

Aging society and gerontechnology: a solution for an independent living?

PubMed

Piau, A; Campo, E; Rumeau, P; Vellas, B; Nourhashémi, F

2014-01-01

Recent studies report that the majority of older adults wish to live in their own homes, for as long as possible. This creates a growing interest in technologies to enable older people to remain living independently at home. The purpose of this article is to provide a narrative review of current technology appropriate for older adults' home use. The key research questions were as follow: 1- What is the evidence demonstrating that gerontechnologies are effective in enabling independent living? 2- What are devices designed specifically for frail elderly persons ? Several publications were identified about devices targeting social isolation (videophonic communication, affective orthotic devices or companion-type robots, personal emergency response systems [security]), autonomy loss (technologies for maintenance of autonomy in the activities of daily living) and cognitive disorders (cognitive orthotics, wandering management systems, telemonitoring). Very few articles dealt specifically with the frail older person. In particular, there was extremely limited evidence on use and efficacy of these devices within this population. There is a need to obtain a consensus on definition of the technologies, and also to revisit work strategies and develop innovative business models. To meet this goal, we need to create a network of technological companies, aging services organizations, end-users, academics, and government representatives to explore the real needs of the frail older population and to develop and validate new devices promoting aging at home.

Development of sequence-specific antimicrobials based on programmable CRISPR-Cas nucleases

PubMed Central

Bikard, David; Euler, Chad; Jiang, Wenyan; Nussenzweig, Philip M.; Goldberg, Gregory W.; Duportet, Xavier; Fischetti, Vincent A.; Marraffini, Luciano A.

2014-01-01

Antibiotics target conserved bacterial cellular pathways or growth functions and therefore cannot selectively kill specific members of a complex microbial population. Here, we develop programmable, sequence-specific antimicrobials using the RNA-guided nuclease Cas91, 2 delivered by a bacteriophage. We show that Cas9 re-programmed to target virulence genes kills virulent, but not avirulent, Staphylococcus aureus. Re-programming the nuclease to target antibiotic resistance genes destroys staphylococcal plasmids that harbor antibiotic resistance genes3, 4 and immunizes avirulent staphylococci to prevent the spread of plasmid-borne resistance genes. We also demonstrate the approach in vivo, showing its efficacy against S. aureus in a mouse skin colonization model. This new technology creates opportunities to manipulate complex bacterial populations in a sequence-specific manner. PMID:25282355

Magnetic nanoparticles as contrast agents for molecular imaging in medicine

NASA Astrophysics Data System (ADS)

O'Donnell, Matthew

2018-05-01

For over twenty years, superparamagnetic nanoparticles have been developed for a number of medical applications ranging from bioseparations, magnetic drug targeting, hyperthermia and imaging. Recent studies have shown that they can be functionalized for in vivo biological targeting, potentially enabling nanoagents for molecular imaging and site-localized drug delivery. Here we review several imaging technologies developed using functionalized superparamagnetic iron oxide nanoparticles (SPIONs) as targeted molecular agents. Several imaging modalities have exploited the large induced magnetic moment of SPIONs to create local mechanical force. Magnetic force microscopy can probe nanoparticle uptake in single cells. For in vivo applications, magnetomotive modulation of primary images in ultrasound (US), photoacoustics (PA), and optical coherence tomography (OCT) can help identify very small concentrations of nanoagents while simultaneously suppressing intrinsic background signals from tissue.

Drug Development for Metastasis Prevention.

PubMed

Fontebasso, Yari; Dubinett, Steven M

2015-01-01

Metastatic disease is responsible for 90% of death from solid tumors. However, only a minority of metastasis-specific targets has been exploited therapeutically, and effective prevention and suppression of metastatic disease is still an elusive goal. In this review, we will first summarize the current state of knowledge about the molecular features of the disease, with particular focus on steps and targets potentially amenable to therapeutic intervention. We will then discuss the reasons underlying the paucity of metastatic drugs in the current oncological arsenal and potential ways to overcome this therapeutic gap. We reason that the discovery of novel promising targets, an increased understanding of the molecular features of the disease, the effect of disruptive technologies, and a shift in the current preclinical and clinical settings have the potential to create more successful drug development endeavors.

Range detection using entangled optical photons

NASA Astrophysics Data System (ADS)

Brandsema, Matthew J.; Narayanan, Ram M.; Lanzagorta, Marco

2015-05-01

Quantum radar is an emerging field that shows a lot of promise in providing significantly improved resolution compared to its classical radar counterpart. The key to this kind of resolution lies in the correlations created from the entanglement of the photons being used. Currently, the technology available only supports quantum radar implementation and validation in the optical regime, as opposed to the microwave regime, because microwave photons have very low energy compared to optical photons. Furthermore, there currently do not exist practical single photon detectors and generators in the microwave spectrum. Viable applications in the optical regime include deep sea target detection and high resolution detection in space. In this paper, we propose a conceptual architecture of a quantum radar which uses entangled optical photons based on Spontaneous Parametric Down Conversion (SPDC) methods. After the entangled photons are created and emerge from the crystal, the idler photon is detected very shortly thereafter. At the same time, the signal photon is sent out towards the target and upon its reflection will impinge on the detector of the radar. From these two measurements, correlation data processing is done to obtain the distance of the target away from the radar. Various simulations are then shown to display the resolution that is possible.

3D Printing Multi-Functionality: Embedded RF Antennas and Components

NASA Technical Reports Server (NTRS)

Shemelya, C. M.; Zemba, M.; Liang, M.; Espalin, D.; Kief, C.; Xin, H.; Wicker, R. B.; MacDonald, E. W.

2015-01-01

Significant research and press has recently focused on the fabrication freedom of Additive Manufacturing (AM) to create both conceptual models and final end-use products. This flexibility allows design modifications to be immediately reflected in 3D printed structures, creating new paradigms within the manufacturing process. 3D printed products will inevitably be fabricated locally, with unit-level customization, optimized to unique mission requirements. However, for the technology to be universally adopted, the processes must be enhanced to incorporate additional technologies; such as electronics, actuation, and electromagnetics. Recently, a novel 3D printing platform, Multi3D manufacturing, was funded by the presidential initiative for revitalizing manufacturing in the USA using 3D printing (America Makes - also known as the National Additive Manufacturing Innovation Institute). The Multi3D system specifically targets 3D printed electronics in arbitrary form; and building upon the potential of this system, this paper describes RF antennas and components fabricated through the integration of material extrusion 3D printing with embedded wire, mesh, and RF elements.

Human body temperature and new approaches to constructing temperature-sensitive bacterial vaccines

PubMed Central

White, Matthew D.; Bosio, Catharine M.; Duplantis, Barry N.

2012-01-01

Many of the live human and animal vaccines that are currently in use are attenuated by virtue of their temperature-sensitive (TS) replication. These vaccines are able to function because they can take advantage of sites in mammalian bodies that are cooler than the core temperature, where TS vaccines fail to replicate. In this article, we discuss the distribution of temperature in the human body, and relate how the temperature differential can be exploited for designing and using TS vaccines. We also examine how one of the coolest organs of the body, the skin, contains antigen-processing cells that can be targeted to provoke the desired immune response from a TS vaccine. We describe traditional approaches to making TS vaccines, and highlight new information and technologies that are being used to create a new generation of engineered TS vaccines. We pay particular attention to the recently described technology of substituting essential genes from Arctic bacteria for their homologues in mammalian pathogens as a way of creating TS vaccines. PMID:21626408

Human body temperature and new approaches to constructing temperature-sensitive bacterial vaccines.

PubMed

White, Matthew D; Bosio, Catharine M; Duplantis, Barry N; Nano, Francis E

2011-09-01

Many of the live human and animal vaccines that are currently in use are attenuated by virtue of their temperature-sensitive (TS) replication. These vaccines are able to function because they can take advantage of sites in mammalian bodies that are cooler than the core temperature, where TS vaccines fail to replicate. In this article, we discuss the distribution of temperature in the human body, and relate how the temperature differential can be exploited for designing and using TS vaccines. We also examine how one of the coolest organs of the body, the skin, contains antigen-processing cells that can be targeted to provoke the desired immune response from a TS vaccine. We describe traditional approaches to making TS vaccines, and highlight new information and technologies that are being used to create a new generation of engineered TS vaccines. We pay particular attention to the recently described technology of substituting essential genes from Arctic bacteria for their homologues in mammalian pathogens as a way of creating TS vaccines.

Sequence-specific antimicrobials using efficiently delivered RNA-guided nucleases.

PubMed

Citorik, Robert J; Mimee, Mark; Lu, Timothy K

2014-11-01

Current antibiotics tend to be broad spectrum, leading to indiscriminate killing of commensal bacteria and accelerated evolution of drug resistance. Here, we use CRISPR-Cas technology to create antimicrobials whose spectrum of activity is chosen by design. RNA-guided nucleases (RGNs) targeting specific DNA sequences are delivered efficiently to microbial populations using bacteriophage or bacteria carrying plasmids transmissible by conjugation. The DNA targets of RGNs can be undesirable genes or polymorphisms, including antibiotic resistance and virulence determinants in carbapenem-resistant Enterobacteriaceae and enterohemorrhagic Escherichia coli. Delivery of RGNs significantly improves survival in a Galleria mellonella infection model. We also show that RGNs enable modulation of complex bacterial populations by selective knockdown of targeted strains based on genetic signatures. RGNs constitute a class of highly discriminatory, customizable antimicrobials that enact selective pressure at the DNA level to reduce the prevalence of undesired genes, minimize off-target effects and enable programmable remodeling of microbiota.

Advances in point-of-care technologies for molecular diagnostics.

PubMed

Zarei, Mohammad

2017-12-15

Advances in miniaturization, nanotechnology, and microfluidics, along with developments in cloud-connected point-of-care (POC) diagnostics technologies are pushing the frontiers of POC devices toward low-cost, user-friendly, and enhanced sensitivity molecular-level diagnostics. The combination of various bio-sensing platforms within smartphone-integrated electronic readers provides accurate on-site and on-time diagnostics based on various types of chemical and biological targets. Further, 3D printing technology shows a huge potential toward fabrication and improving the performance of POC devices. Integration of skin-like flexible sensors with wireless communication technology creates a unique opportunity for continuous, real-time monitoring of patients for both preventative healthcare and during disease outbreaks. Here, we review recent developments and advances in POC technologies and describe how these advances enhance the performance of POC platforms. Also, this review describes challenges, directions, and future trends on application of emerging technologies in POC diagnostics. Copyright © 2017 Elsevier B.V. All rights reserved.

Attracting the Best. How the Military Competes for Information Technology Personnel

DTIC Science & Technology

2004-01-01

home life. The option to telecommute and a flexible work schedule top the list of low-cost benefits. • The employers create diversity in culture and...rate of promotion. But in the main, the Army did not encourage reclassifying, except for low-density, hard -to-fill specialties, and reclassification...quality recruits. The Army, Navy, and Air Force were hard pressed to meet even their overall numerical targets for recruits, let alone their tar- gets for

JPRS Report, Science & Technology, China: Energy.

DTIC Science & Technology

1992-02-26

China Becomes Major Energy Player [Wang Hanlin; KEJIRIBAO, 19Aug91] 1 S&T Led the Way to Creating Energy Bases [ Lu Xinning; RENMIN RIBAO, 16 Sep 91...RIBAO, 14 Dec 91] 18 COAL Energy Ministry Takes Steps To Strengthen Coal Industry [Xie Ranhao; JINGJI RIBAO, 29 Oct 91] .... 19 Henan’s Coal...27 Dec 91] 22 Zhongyuan Is Tempting Target for Oil and Gas Theft [ Zhu Sixiong; RENMIN RIBAO, 17 Dec 91] 23 Big Breakthrough in Prospecting

Genome-scale engineering of Saccharomyces cerevisiae with single-nucleotide precision.

PubMed

Bao, Zehua; HamediRad, Mohammad; Xue, Pu; Xiao, Han; Tasan, Ipek; Chao, Ran; Liang, Jing; Zhao, Huimin

2018-07-01

We developed a CRISPR-Cas9- and homology-directed-repair-assisted genome-scale engineering method named CHAnGE that can rapidly output tens of thousands of specific genetic variants in yeast. More than 98% of target sequences were efficiently edited with an average frequency of 82%. We validate the single-nucleotide resolution genome-editing capability of this technology by creating a genome-wide gene disruption collection and apply our method to improve tolerance to growth inhibitors.

Competing in the brave new (deregulated) world: Service innovation and brand strategy for utilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foster, D.; Lathrop, S.; Wolf, A.

This paper will address ways utilities can gain a competitive advantage despite industry turbulence. It details how to create successful brand and innovation strategies and how to link these in order to create successful new products and services for customers. After gaining a solid understanding of industry trends, the first step is to develop an ideal brand image and create a brand strategy around it. Next, companies must determine how to roll out and leverage brands to targeted customer segments over time through a brand architecture. Then, they must build an innovation strategy, defining where and how to apply newmore » technologies and develop new products and services. This strategy is linked to the brand architecture through a product architecture. Finally, companies must be able to successfully develop new products and services through a well-planned innovation process.« less

Pharmaceutical spray drying: solid-dose process technology platform for the 21st century.

PubMed

Snyder, Herman E

2012-07-01

Requirement for precise control of solid-dosage particle properties created with a scalable process technology are continuing to expand in the pharmaceutical industry. Alternate methods of drug delivery, limited active drug substance solubility and the need to improve drug product stability under room-temperature conditions are some of the pharmaceutical applications that can benefit from spray-drying technology. Used widely for decades in other industries with production rates up to several tons per hour, pharmaceutical uses for spray drying are expanding beyond excipient production and solvent removal from crystalline material. Creation of active pharmaceutical-ingredient particles with combinations of unique target properties are now more common. This review of spray-drying technology fundamentals provides a brief perspective on the internal process 'mechanics', which combine with both the liquid and solid properties of a formulation to enable high-throughput, continuous manufacturing of precision powder properties.

Drug discovery in the next millennium.

PubMed

Ohlstein, E H; Ruffolo, R R; Elliott, J D

2000-01-01

Selection and validation of novel molecular targets have become of paramount importance in light of the plethora of new potential therapeutic drug targets that have emerged from human gene sequencing. In response to this revolution within the pharmaceutical industry, the development of high-throughput methods in both biology and chemistry has been necessitated. This review addresses these technological advances as well as several new areas that have been created by necessity to deal with this new paradigm, such as bioinformatics, cheminformatics, and functional genomics. With many of these key components of future drug discovery now in place, it is possible to map out a critical path for this process that will be used into the new millennium.

In Situ Target Engagement Studies in Adherent Cells.

PubMed

Axelsson, Hanna; Almqvist, Helena; Otrocka, Magdalena; Vallin, Michaela; Lundqvist, Sara; Hansson, Pia; Karlsson, Ulla; Lundbäck, Thomas; Seashore-Ludlow, Brinton

2018-04-20

A prerequisite for successful drugs is effective binding of the desired target protein in the complex environment of a living system. Drug-target engagement has typically been difficult to monitor in physiologically relevant models, and with current methods, especially, while maintaining spatial information. One recent technique for quantifying drug-target engagement is the cellular thermal shift assay (CETSA), in which ligand-induced protein stabilization is measured after a heat challenge. Here, we describe a CETSA protocol in live A431 cells for p38α (MAPK14), where remaining soluble protein is detected in situ, using high-content imaging in 384-well, microtiter plates. We validate this assay concept using a number of known p38α inhibitors and further demonstrate the potential of this technology for chemical probe and drug discovery purposes by performing a small pilot screen for novel p38α binders. Importantly, this protocol creates a workflow that is amenable to adherent cells in their native state and yields spatially resolved target engagement information measurable at the single-cell level.

Initial Design of Culturally Informed Behavioral Intervention Technologies: Developing an mHealth Intervention for Young Sexual Minority Men With Generalized Anxiety Disorder and Major Depression

PubMed Central

Montague, Enid; Mohr, David C

2013-01-01

Background To our knowledge, there is no well-articulated process for the design of culturally informed behavioral intervention technologies. Objective This paper describes the early stages of such a process, illustrated by the methodology for the ongoing development of a behavioral intervention technology targeting generalized anxiety disorder and major depression among young sexual minority men. Methods We integrated instructional design for Internet behavioral intervention technologies with greater detail on information sources that can identify user needs in understudied populations, as well as advances in the understanding of technology-specific behavioral intervention technology dimensions that may need to be culturally tailored. Results General psychological theory describing how to effect change in the clinical target is first integrated with theory describing potentially malleable factors that help explain the clinical problem within the population. Additional information sources are then used to (1) evaluate the theory, (2) identify population-specific factors that may affect users’ ability to relate to and benefit from the behavioral intervention technology, and (3) establish specific skills, attitudes, knowledge, etc, required to change malleable factors posited in the theory. User needs result from synthesis of this information. Product requirements are then generated through application of the user needs to specific behavioral intervention technology dimensions (eg, technology platform). We provide examples of considerations relevant to each stage of this process and how they were applied. Conclusions This process can guide the initial design of other culturally informed behavioral intervention technologies. This first attempt to create a systematic design process can spur development of guidelines for design of behavioral intervention technologies aimed to reduce health disparities. PMID:24311444

Single-Step qPCR and dPCR Detection of Diverse CRISPR-Cas9 Gene Editing Events In Vivo.

PubMed

Falabella, Micol; Sun, Linqing; Barr, Justin; Pena, Andressa Z; Kershaw, Erin E; Gingras, Sebastien; Goncharova, Elena A; Kaufman, Brett A

2017-10-05

Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)-CRISPR-associated protein 9 (Cas9)-based technology is currently the most flexible means to create targeted mutations by recombination or indel mutations by nonhomologous end joining. During mouse transgenesis, recombinant and indel alleles are often pursued simultaneously. Multiple alleles can be formed in each animal to create significant genetic complexity that complicates the CRISPR-Cas9 approach and analysis. Currently, there are no rapid methods to measure the extent of on-site editing with broad mutation sensitivity. In this study, we demonstrate the allelic diversity arising from targeted CRISPR editing in founder mice. Using this DNA sample collection, we validated specific quantitative and digital PCR methods (qPCR and dPCR, respectively) for measuring the frequency of on-target editing in founder mice. We found that locked nucleic acid (LNA) probes combined with an internal reference probe (Drop-Off Assay) provide accurate measurements of editing rates. The Drop-Off LNA Assay also detected on-target CRISPR-Cas9 gene editing in blastocysts with a sensitivity comparable to PCR-clone sequencing. Lastly, we demonstrate that the allele-specific LNA probes used in qPCR competitor assays can accurately detect recombinant mutations in founder mice. In summary, we show that LNA-based qPCR and dPCR assays provide a rapid method for quantifying the extent of on-target genome editing in vivo , testing RNA guides, and detecting recombinant mutations. Copyright © 2017 Falabella et al.

Genome assembly reborn: recent computational challenges

PubMed Central

2009-01-01

Research into genome assembly algorithms has experienced a resurgence due to new challenges created by the development of next generation sequencing technologies. Several genome assemblers have been published in recent years specifically targeted at the new sequence data; however, the ever-changing technological landscape leads to the need for continued research. In addition, the low cost of next generation sequencing data has led to an increased use of sequencing in new settings. For example, the new field of metagenomics relies on large-scale sequencing of entire microbial communities instead of isolate genomes, leading to new computational challenges. In this article, we outline the major algorithmic approaches for genome assembly and describe recent developments in this domain. PMID:19482960

Technology Innovations to Improve Biomass Cookstoves to Meet Tier 4 Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Still, Dean K; Hatfield, Micheal S

Technology Innovations to Improve Biomass Cookstoves to Meet Tier 4 Standards. Protecting public health has become a major motivation for investigating how improved cook stoves might function as a viable intervention. Currently, the great majority of cookstoves for sale in the developing world were not designed for this purpose but instead success was based on criteria such as reduced fuel use, affordability, and ease of use. With DOE funding Aprovecho Research Center spent three years creating stoves using an iterative development and modeling approach resulting in four stoves that in lab tests met the World Health Organization (2014) intermediate ratemore » vented targets for PM2.5 and for CO.« less

Exploiting passive nanomedicine accumulation at sites of enhanced vascular permeability for non-cancerous applications.

PubMed

Durymanov, Mikhail; Kamaletdinova, Tatiana; Lehmann, Sarah E; Reineke, Joshua

2017-09-10

Over the past few decades, enhanced permeability of tumor vasculature was actively exploited for targeted delivery of anticancer nanomedicines resulting in numerous pharmaceutical products. Formation of new immature and leaky vessels along with inflammatory remodeling of existing vessels accompany development of numerous diseases beyond cancer and present an opportunity for passive accumulation of intravenously administered nanomedicines in many pathological tissues. To date, applications of non-cancerous enhanced permeation have been relatively unexploited as target tissues and may create new therapy and prevention technologies for many disorders. Herein, we summarize the current knowledge on the nature of enhanced vascular permeability in multiple non-cancerous pathological tissues. We also discuss the clinical status of nanotherapeutics with selectivity based on passive accumulation in non-cancerous target tissues, their challenges, and prospects. Copyright © 2017 Elsevier B.V. All rights reserved.

Bio-inspired diversity for increasing attacker workload

NASA Astrophysics Data System (ADS)

Kuhn, Stephen

2014-05-01

Much of the traffic in modern computer networks is conducted between clients and servers, rather than client-toclient. As a result, servers represent a high-value target for collection and analysis of network traffic. As they reside at a single network location (i.e. IP/MAC address) for long periods of time. Servers present a static target for surveillance, and a unique opportunity to observe the network traffic. Although servers present a heightened value for attackers, the security community as a whole has shifted more towards protecting clients in recent years leaving a gap in coverage. In addition, servers typically remain active on networks for years, potentially decades. This paper builds on previous work that demonstrated a proof of concept leveraging existing technology for increasing attacker workload. Here we present our clean slate approach to increasing attacker workload through a novel hypervisor and micro-kernel, utilizing next generation virtualization technology to create synthetic diversity of the server's presence including the hardware components.

Countershock: mobilizing resistance to electroshock weapons.

PubMed

Martin, Brian; Wright, Steve

2003-01-01

Electroshock, stun and restraint technologies are often used for torture and as tools of repression. There is much information available exposing the problems with such technologies, but little about how to be effective in challenging their use. The concept of political ju-jitsu--the process by which an attack on a non-violent resister can backfire on the attackers--is introduced and adapted to examine challenges to electroshock weapons. In order to make these weapons backfire, it is important to emphasize the value of potential targets, to expose secret dealings, to reveal the harm caused by the weapons and to communicate clearly to a wide audience. A longer-term goal is policy change to deny access by torturing states to such repressive tools. Countershock strategies and methodologies are introduced here as potential tools to create ever-expanding torture-technology-free zones.

ATR evaluation through the synthesis of multiple performance measures

NASA Astrophysics Data System (ADS)

Bassham, Christopher B.; Klimack, William K.; Bauer, Kenneth W., Jr.

2002-07-01

This research demonstrates the application of decision analysis (DA) techniques to decisions made within Automatic Target Recognition (ATR) technology development. This work is accomplished to improve the means by which ATR technologies are evaluated. The first step in this research was to create a flexible decision analysis framework that could be applied to several decisions across different ATR programs evaluated by the Comprehensive ATR Scientific Evaluation (COMPASE) Center of the Air Force Research Laboratory (AFRL). For the purposes of this research, a single COMPASE Center representative provided the value, utility, and preference functions for the DA framework. The DA framework employs performance measures collected during ATR classification system (CS) testing to calculate value and utility scores. The authors gathered data from the Moving and Stationary Target Acquisition and Recognition (MSTAR) program to demonstrate how the decision framework could be used to evaluate three different ATR CSs. A decision-maker may use the resultant scores to gain insight into any of the decisions that occur throughout the lifecycle of ATR technologies. Additionally, a means of evaluating ATR CS self-assessment ability is presented. This represents a new criterion that emerged from this study, and no present evaluation metric is known.

A range/depth modulation transfer function (RMTF) framework for characterizing 3D imaging LADAR performance

NASA Astrophysics Data System (ADS)

Staple, Bevan; Earhart, R. P.; Slaymaker, Philip A.; Drouillard, Thomas F., II; Mahony, Thomas

2005-05-01

3D imaging LADARs have emerged as the key technology for producing high-resolution imagery of targets in 3-dimensions (X and Y spatial, and Z in the range/depth dimension). Ball Aerospace & Technologies Corp. continues to make significant investments in this technology to enable critical NASA, Department of Defense, and national security missions. As a consequence of rapid technology developments, two issues have emerged that need resolution. First, the terminology used to rate LADAR performance (e.g., range resolution) is inconsistently defined, is improperly used, and thus has become misleading. Second, the terminology does not include a metric of the system"s ability to resolve the 3D depth features of targets. These two issues create confusion when translating customer requirements into hardware. This paper presents a candidate framework for addressing these issues. To address the consistency issue, the framework utilizes only those terminologies proposed and tested by leading LADAR research and standards institutions. We also provide suggestions for strengthening these definitions by linking them to the well-known Rayleigh criterion extended into the range dimension. To address the inadequate 3D image quality metrics, the framework introduces the concept of a Range/Depth Modulation Transfer Function (RMTF). The RMTF measures the impact of the spatial frequencies of a 3D target on its measured modulation in range/depth. It is determined using a new, Range-Based, Slanted Knife-Edge test. We present simulated results for two LADAR pulse detection techniques and compare them to a baseline centroid technique. Consistency in terminology plus a 3D image quality metric enable improved system standardization.

Role of Bioreactor Technology in Tissue Engineering for Clinical Use and Therapeutic Target Design.

PubMed

Selden, Clare; Fuller, Barry

2018-04-24

Micro and small bioreactors are well described for use in bioprocess development in pre-production manufacture, using ultra-scale down and microfluidic methodology. However, the use of bioreactors to understand normal and pathophysiology by definition must be very different, and the constraints of the physiological environment influence such bioreactor design. This review considers the key elements necessary to enable bioreactors to address three main areas associated with biological systems. All entail recreation of the in vivo cell niche as faithfully as possible, so that they may be used to study molecular and cellular changes in normal physiology, with a view to creating tissue-engineered grafts for clinical use; understanding the pathophysiology of disease at the molecular level; defining possible therapeutic targets; and enabling appropriate pharmaceutical testing on a truly representative organoid, thus enabling better drug design, and simultaneously creating the potential to reduce the numbers of animals in research. The premise explored is that not only cellular signalling cues, but also mechano-transduction from mechanical cues, play an important role.

Ultra-intense Pair Creation using the Texas Petawatt Laser and Applications

NASA Astrophysics Data System (ADS)

Liang, Edison; Henderson, Alexander; Clarke, Taylor; Lo, Willie; Chaguine, Petr; Dyer, Gilliss; Riley, Nathan; Serratto, Kristina; Donovan, Michael; Ditmire, Todd

2014-10-01

Pair plasmas and intense gamma-ray sources are ubiquitous in the high-energy universe, from pulser winds to gamma-ray bursts (GRB). Their study can be greatly enhanced if such sources can be recreated in the laboratory under controlled conditions. In 2012 and 2013, a joint Rice-University of Texas team performed over 130 laser shots on thick gold and platinum targets using the 100 Joule Texas Petawatt Laser in Austin. The laser intensity of many shots exceeded 1021 W.cm-2 with pulses as short as 130 fs. These experiments probe a new extreme regime of ultra-intense laser - high-Z solid target interactions never achieved before. In addition to creating copious pairs with the highest density (>1015/cc) and emergent e +/e- ratio exceeding 20% in many shots, these experiments also created the highest density multi-MeV gamma-rays, comparable in absolute numbers to those found inside a gamma-ray burst (GRB). Potential applications of such intense pair and gamma-ray sources to laboratory astrophysics and innovative technologies will be discussed. Work supported by DOE HEDLP program.

A simple Gateway-assisted construction system of TALEN genes for plant genome editing.

PubMed

Kusano, Hiroaki; Onodera, Hitomi; Kihira, Miho; Aoki, Hiromi; Matsuzaki, Hikaru; Shimada, Hiroaki

2016-07-25

TALEN is an artificial nuclease being applied for sequence-specific genome editing. For the plant genome editing, a pair of TALEN genes is expressed in the cells, and a binary plasmid for Agrobacterium-mediated transformation should be assembled. We developed a novel procedure using the Gateway-assisted plasmids, named Emerald-Gateway TALEN system. We constructed entry vectors, pPlat plasmids, for construction of a desired TALEN gene using Platinum Gate TALEN kit. We also created destination plasmid, pDual35SGw1301, which allowed two TALEN genes to both DNA strands to recruit using Gateway technology. Resultant TALEN genes were evaluated by the single-strand annealing (SSA) assay in E. coli cells. By this assay, the TALENs recognized the corresponding targets in the divided luciferase gene, and induced a specific recombination to generate an active luciferase gene. Using the TALEN genes constructed, we created a transformant potato cells in which a site-specific mutation occurred at the target site of the GBSS gene. This suggested that our system worked effectively and was applicable as a convenient tool for the plant genome editing.

An evaluation of parent-produced video self-modeling to improve independence in an adolescent with intellectual developmental disorder and an autism spectrum disorder: a controlled case study.

PubMed

Allen, Keith D; Vatland, Christopher; Bowen, Scott L; Burke, Raymond V

2015-07-01

We evaluated a parent-created video self-modeling (VSM) intervention to improve independence in an adolescent diagnosed with Intellectual Developmental Disorder (IDD) and Autism Spectrum Disorder (ASD). In a multiple baseline design across routines, a parent and her 17-year-old daughter created self-modeling videos of three targeted routines needed for independence in the community. The parent used a tablet device with a mobile app called "VideoTote" to produce videos of the daughter performing the targeted routines. The mobile app includes a 30-s tutorial about making modeling videos. The parent and daughter produced and watched a VSM scene prior to performing each of the three routines in an analogue community setting. The adolescent showed marked, immediate, and sustained improvements in performing each routine following the production and implementation of the VSM. Performance was found to generalize to the natural community setting. Results suggest that parents can use available technology to promote community independence for transition age individuals. © The Author(s) 2015.

Terre des Lasers: the new Aquitaine outreach and communication center in photonics

NASA Astrophysics Data System (ADS)

Prulhiere, Jean Paul; Sarger, Laurent

2009-06-01

The competitive cluster "Route des Lasers" has been labeled by the French Government in July 2005. In this context, it has launched in September 2005, in cooperation with Commissariat à l'Energie Atomique (CEA) and Regional Council a project involving scientific exhibitions, called "Terre des Lasers ®", in order to create an exhibition and an area of communication and science discovery or a very large target (public, school, industry) in the fields of optics, lasers, optronics and imaging. This initiative is part of the strategy of the "Route des Lasers" center which aims to promote technologies developed in the areas of photonics, targeting in particular children and teenagers and their awareness for this particular industrial and scientific topic.

New vision in fractional radiofrequency technology with switching, vacuum and cooling.

PubMed

Elman, Monica; Gauthier, Nelly; Belenky, Inna

2015-04-01

Since the introduction of fractional technology, various systems were launched to the market. The first generation of fractional RF systems created epidermal ablation with coagulative/necrosis of the dermis with sufficient clinical outcomes, but with some limitations. The aim of this study was to evaluate the efficacy and safety of SVC technology, based on the principle of separate biological responses. Fifty-two patients were treated for 3-6 sessions using fractional RF handpiece and eight patients received combination treatments with non-invasive RF handpiece. All volunteers showed notable to significant improvement in the photoageing symptoms, without any significant complications or adverse events. Due to its wide spectrum of parameters, the SVC technology can promote different biological responses. Owing to the "Switching" technology, the control of energy depth penetration enables delivery of the necessary thermal dose to the targeted skin layer. In addition, this novel technology includes the "Vacuum" and "Cooling" mechanisms, each contributing to the safety of the treatment. The Smart Heat function reduces the necessary energy levels and thereby reduces the pain level and risks for side effects.

A transcription activator-like effector (TALE) induction system mediated by proteolysis.

PubMed

Copeland, Matthew F; Politz, Mark C; Johnson, Charles B; Markley, Andrew L; Pfleger, Brian F

2016-04-01

Simple and predictable trans-acting regulatory tools are needed in the fields of synthetic biology and metabolic engineering to build complex genetic circuits and optimize the levels of native and heterologous gene products. Transcription activator-like effectors (TALEs) are bacterial virulence factors that have recently gained traction in biotechnology applications owing to their customizable DNA-binding specificity. In this work we expanded the versatility of these transcription factors to create an inducible TALE system by inserting tobacco-etch virus (TEV) protease recognition sites into the TALE backbone. The resulting engineered TALEs maintain transcriptional repression of their target genes in Escherichia coli, but are degraded after induction of the TEV protease, thereby promoting expression of the previously repressed target gene of interest. This TALE-TEV technology enables both repression and induction of plasmid or chromosomal target genes in a manner analogous to traditional repressor proteins but with the added flexibility of being operator-agnostic.

A transcription activator-like effector induction system mediated by proteolysis

PubMed Central

Copeland, Matthew F.; Politz, Mark C.; Johnson, Charles B.; Markley, Andrew L.; Pfleger, Brian F.

2016-01-01

Simple and predictable trans-acting regulatory tools are needed in the fields of synthetic biology and metabolic engineering to build complex genetic circuits and optimize the levels of native and heterologous gene products. Transcription activator-like effectors (TALEs) are bacterial virulence factors that have recently gained traction in biotechnology applications due to their customizable DNA binding specificity. In this work we expand the versatility of these transcription factors to create an inducible TALE system by inserting tobacco-etch virus (TEV) protease recognition sites into the TALE backbone. The resulting engineered TALEs maintain transcriptional repression of their target genes in Escherichia coli, but are degraded following the induction of the TEV protease, thereby promoting expression of the previously repressed target gene of interest. This TALE-TEV technology enables both repression and induction of plasmid or chromosomal target genes in a manner analogous to traditional repressor proteins but with the added flexibility of being operator agnostic. PMID:26854666

Molecules in the Spotlight

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cryan, James

2010-01-26

SLAC has just unveiled the world's first X-ray laser, the LCLS. This machine produces pulses of X-rays that are ten billion times brighter than those from conventional sources. One of the goals of this machine is to make movies of chemical reactions, including reactions necessary for life and reactions that might power new energy technologies. This public lecture will show the first results from the LCLS. As a first target, we have chosen nitrogen gas, the main component of the air we breathe. Using the unprecedented power of the LCLS X-rays as a blasting torch, we have created new formsmore » of this molecule and with unique electronic arrangements. Please share with us the first insights from this new technology.« less

Cancer Nanotechnology: The impact of passive and active targeting in the era of modern cancer biology☆

PubMed Central

Bertrand, Nicolas; Wu, Jun; Xu, Xiaoyang; Kamaly, Nazila; Farokhzad, Omid C

2014-01-01

Cancer nanotherapeutics are progressing at a steady rate; research and development in the field has experienced an exponential growth since early 2000’s. The path to the commercialization of oncology drugs is long and carries significant risk; however, there is considerable excitement that nanoparticle technologies may contribute to the success of cancer drug development. The pace at which pharmaceutical companies have formed partnerships to use proprietary nanoparticle technologies has considerably accelerated. It is now recognized that by enhancing the efficacy and/or tolerability of new drug candidates, nanotechnology can meaningfully contribute to create differentiated products and improve clinical outcome. This review describes the lessons learned since the commercialization of the first-generation nanomedicines including DOXIL® and Abraxane®. It explores our current understanding of targeted and non-targeted nanoparticles that are under various stages of development, including BIND-014 and MM-398. It highlights the opportunities and challenges faced by nanomedicines in contemporary oncology, where personalized medicine is increasingly the mainstay of cancer therapy. We revisit the fundamental concepts of enhanced permeability and retention effect (EPR) and explore the mechanisms proposed to enhance preferential “retention” in the tumor, whether using active targeting of nanoparticles, binding of drugs to their tumoral targets or the presence of tumor associated macrophages. The overall objective of this review is to enhance our understanding in the design and development of therapeutic nanoparticles for treatment of cancers. PMID:24270007

The Southeastern Minnesota Beacon Project for Community-driven Health Information Technology: Origins, Achievements, and Legacy.

PubMed

Chute, Christopher G; Hart, Lacey A; Alexander, Alex K; Jensen, Daniel W

2014-01-01

The Southeastern (SE) Minnesota Beacon organized all the health care providers, county public health organizations, and school districts in the deployment and integration of health information exchange (HIE) and targeted health communication around childhood asthma and diabetes. The community cooperated to establish a clinical data repository for all residents in the 11-county region. Through this community of practice approach that involved traditional and nontraditional providers, the SE Minnesota Beacon was able to realize unique applications of this technology. This manuscript overviews the associated organization and infrastructure of this community collaboration. The Office of the National Coordinator for Health Information Technology (ONC), as part of the American Recovery and Reinvestment Act of 2009 (ARRA) stimulus, established 17 projects throughout the United States targeting the introduction and meaningful use of health information technology (HIT). These 17 communities were intended to serve as an example of what could be accomplished. The SE Minnesota Beacon is one of these communities. The community ultimately opted for peer-to-peer HIE, using Nationwide Health Information Network (NwHIN) Connect software. The clinical data repository was established using the infrastructure developed by the Regenstrief Institute, which operated as a trusted third party. As an extension to HIE, the consortium of county public health departments created a patient data portal for use by school nurses and parents. Childhood asthma was addressed by creating, exchanging, and maintaining an "asthma action plan" for each affected child, shared throughout the community, including through the patient portal. Diabetes management introduced patient treatment decision tools and patient quality of life measures, facilitating care. Influenza vaccination was enhanced by large-scale community reporting in partnership with the state vaccination registry. The methodology and principles for arriving at these solutions included community engagement, sustainability, scalability, standards, and best practices that fit a variety of organizations-from large, robust providers to small organizations. The SE Minnesota Beacon demonstrated that all providers for a geographically defined population can cooperate in the development and shared governance of a low-cost, sustainable HIE, and the operation of a community-managed clinical data repository. Furthermore, these infrastructures can be leveraged to collaboratively improve the care of patients, as demonstrated for childhood asthma and adult diabetes mellitus. The shared governance of HIT by a community can palpably change the scope and success of collaborations targeted to improve patient and community health care.

2.5 dimension structures in deep proton lithography

NASA Astrophysics Data System (ADS)

Kasztelanic, Rafal

2006-04-01

There are several technologies for cheap mass fabrication of microelements. One of them is deep proton lithography, used for the fabrication of elements of high structural depth. In this technology, accelerated protons are usually focused or formed by a mask to light a target. The energy of the proton beam is enough for all the protons to get through the target, losing only a part of their kinesthetic energy. Protons leaving the target are counted in various ways, thanks to which it is possible to estimate the energy deposed inside the target. In the next step chemical development is used to get rid of the radiated part of the target. With the use of this method, various 2D microelements can be obtained and the proton beam plays the role of a knife, cutting out the required shapes from the material. However, in order to make elements of modified surface (2.5D surface) it is necessary to change the energy of the proton beam or to change the dose deposed inside the material. The current article presents a proposal of creating simple 2.5D structures with the use of the method modifying the deposed does. This entails the modification of the deep proton lithography setup, which results moving the part for measuring the deposed dose of energy before the target. Additionally, the new deep proton lithography setup operates in the air. This article presents the results of simulations, as well as experimental results for such a setup built for the tandem accelerator in Erlangen, Germany.

Invention-driven marketing

NASA Technical Reports Server (NTRS)

Carlson, William E.

1994-01-01

Suppose you have just created a revolutionary bicycle suspension which allows a bike to be ridden over rough terrain at 60 miles per hour. In addition, suppose that you are deeply concerned about the plight of hungry children. Which should you do: be sure all hungry children have bicycles; transfer the technology for your new suspension to bicycle manufacturers worldwide; or start a company to supply premium sports bicycle based on your patented technology, and donate the profits to a charity which feeds hungry children? Woven through this somewhat trivial example is the paradox of technology transfer - the supplier (owner) may want to transfer technology; but to succeed, he or she must reformulate the problem as a user need for which there is a new and better solution. Successful technology transfer is little more than good marketing applied to an existing invention, process, or capability. You must identify who needs the technology, why they need it, why the new technology is better than alternatives, how much the customers are willing and able to pay for these benefits, and how to distribute products based on the technology tc the target customers. In market-driven development, the term 'technology transfer' is rarely used. The developers focus on studying user needs and designing solution They may have technology needs, but they don't have technology in search of a use.

Toward a new information infrastructure in health technology assessment: communication, design, process, and results.

PubMed

Neikter, Susanna Allgurin; Rehnqvist, Nina; Rosén, Måns; Dahlgren, Helena

2009-12-01

The aim of this study was to facilitate effective internal and external communication of an international network and to explore how to support communication and work processes in health technology assessment (HTA). STRUCTURE AND METHODS: European network for Health Technology Assessment (EUnetHTA) connected sixty-four HTA Partner organizations from thirty-three countries. User needs in the different steps of the HTA process were the starting point for developing an information system. A step-wise, interdisciplinary, creative approach was used in developing practical tools. An Information Platform facilitated the exchange of scientific information between Partners and with external target groups. More than 200 virtual meetings were set up during the project using an e-meeting tool. A Clearinghouse prototype was developed with the intent to offering a single point of access to HTA relevant information. This evolved into a next step not planned from the outset: Developing a running HTA Information System including several Web-based tools to support communication and daily HTA processes. A communication strategy guided the communication effort, focusing on practical tools, creating added value, involving stakeholders, and avoiding duplication of effort. Modern technology enables a new information infrastructure for HTA. The potential of information and communication technology was used as a strategic tool. Several target groups were represented among the Partners, which supported collaboration and made it easier to identify user needs. A distinctive visual identity made it easier to gain and maintain visibility on a limited budget.

Using Technology to Create Safer Schools.

ERIC Educational Resources Information Center

Townley, Arthur J.; Martinez, Kenneth

1995-01-01

Although classes to create student self-esteem and antigang programs are gaining in popularity, most school districts have not used available technology to help create safer campuses. Increased availability of telephones and two-way radios would enhance school security, along with incorporation of newer technologies such as computers, digitized…

2016 New Horizons Lecture: Beyond Imaging-Radiology of Tomorrow.

PubMed

Hricak, Hedvig

2018-03-01

This article is based on the New Horizons lecture delivered at the 2016 Radiological Society of North America Annual Meeting. It addresses looming changes for radiology, many of which stem from the disruptive effects of the Fourth Industrial Revolution. This is an emerging era of unprecedented rapid innovation marked by the integration of diverse disciplines and technologies, including data science, machine learning, and artificial intelligence-technologies that narrow the gap between man and machine. Technologic advances and the convergence of life sciences, physical sciences, and bioengineering are creating extraordinary opportunities in diagnostic radiology, image-guided therapy, targeted radionuclide therapy, and radiology informatics, including radiologic image analysis. This article uses the example of oncology to make the case that, if members in the field of radiology continue to be innovative and continuously reinvent themselves, radiology can play an ever-increasing role in both precision medicine and value-driven health care. © RSNA, 2018.

Salient Features of Endonuclease Platforms for Therapeutic Genome Editing.

PubMed

Certo, Michael T; Morgan, Richard A

2016-03-01

Emerging gene-editing technologies are nearing a revolutionary phase in genetic medicine: precisely modifying or repairing causal genetic defects. This may include any number of DNA sequence manipulations, such as knocking out a deleterious gene, introducing a particular mutation, or directly repairing a defective sequence by site-specific recombination. All of these edits can currently be achieved via programmable rare-cutting endonucleases to create targeted DNA breaks that can engage and exploit endogenous DNA repair pathways to impart site-specific genetic changes. Over the past decade, several distinct technologies for introducing site-specific DNA breaks have been developed, yet the different biological origins of these gene-editing technologies bring along inherent differences in parameters that impact clinical implementation. This review aims to provide an accessible overview of the various endonuclease-based gene-editing platforms, highlighting the strengths and weakness of each with respect to therapeutic applications.

Salient Features of Endonuclease Platforms for Therapeutic Genome Editing

PubMed Central

Certo, Michael T; Morgan, Richard A

2016-01-01

Emerging gene-editing technologies are nearing a revolutionary phase in genetic medicine: precisely modifying or repairing causal genetic defects. This may include any number of DNA sequence manipulations, such as knocking out a deleterious gene, introducing a particular mutation, or directly repairing a defective sequence by site-specific recombination. All of these edits can currently be achieved via programmable rare-cutting endonucleases to create targeted DNA breaks that can engage and exploit endogenous DNA repair pathways to impart site-specific genetic changes. Over the past decade, several distinct technologies for introducing site-specific DNA breaks have been developed, yet the different biological origins of these gene-editing technologies bring along inherent differences in parameters that impact clinical implementation. This review aims to provide an accessible overview of the various endonuclease-based gene-editing platforms, highlighting the strengths and weakness of each with respect to therapeutic applications. PMID:26796671

Real Time Analysis of Bioanalytes in Healthcare, Food, Zoology and Botany

PubMed Central

Wang, Tianqi; Ramnarayanan, Ashwin

2017-01-01

The growing demand for real time analysis of bioanalytes has spurred development in the field of wearable technology to offer non-invasive data collection at a low cost. The manufacturing processes for creating these sensing systems vary significantly by the material used, the type of sensors needed and the subject of study as well. The methods predominantly involve stretchable electronic sensors to monitor targets and transmit data mainly through flexible wires or short-range wireless communication devices. Capable of conformal contact, the application of wearable technology goes beyond the healthcare to fields of food, zoology and botany. With a brief review of wearable technology and its applications to various fields, we believe this mini review would be of interest to the reader in broad fields of materials, sensor development and areas where wearable sensors can provide data that are not available elsewhere. PMID:29267256

Real Time Analysis of Bioanalytes in Healthcare, Food, Zoology and Botany.

PubMed

Wang, Tianqi; Ramnarayanan, Ashwin; Cheng, Huanyu

2017-12-21

The growing demand for real time analysis of bioanalytes has spurred development in the field of wearable technology to offer non-invasive data collection at a low cost. The manufacturing processes for creating these sensing systems vary significantly by the material used, the type of sensors needed and the subject of study as well. The methods predominantly involve stretchable electronic sensors to monitor targets and transmit data mainly through flexible wires or short-range wireless communication devices. Capable of conformal contact, the application of wearable technology goes beyond the healthcare to fields of food, zoology and botany. With a brief review of wearable technology and its applications to various fields, we believe this mini review would be of interest to the reader in broad fields of materials, sensor development and areas where wearable sensors can provide data that are not available elsewhere.

Knowledge-Based Parallel Performance Technology for Scientific Application Competitiveness Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Malony, Allen D; Shende, Sameer

The primary goal of the University of Oregon's DOE "œcompetitiveness" project was to create performance technology that embodies and supports knowledge of performance data, analysis, and diagnosis in parallel performance problem solving. The target of our development activities was the TAU Performance System and the technology accomplishments reported in this and prior reports have all been incorporated in the TAU open software distribution. In addition, the project has been committed to maintaining strong interactions with the DOE SciDAC Performance Engineering Research Institute (PERI) and Center for Technology for Advanced Scientific Component Software (TASCS). This collaboration has proved valuable for translationmore » of our knowledge-based performance techniques to parallel application development and performance engineering practice. Our outreach has also extended to the DOE Advanced CompuTational Software (ACTS) collection and project. Throughout the project we have participated in the PERI and TASCS meetings, as well as the ACTS annual workshops.« less

Progress of the Photovoltaic Technology Incubator Project Towards an Enhanced U.S. Manufacturing Base: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ullal, H.; Mitchell, R.; Keyes, B.

In this paper, we report on the major accomplishments of the U.S. Department of Energy's (DOE) Solar Energy Technologies Program (SETP) Photovoltaic (PV) Technology Incubator project. The Incubator project facilitates a company's transition from developing a solar cell or PV module prototype to pilot- and large-scale U.S. manufacturing. The project targets small businesses that have demonstrated proof-of-concept devices or processes in the laboratory. Their success supports U.S. Secretary of Energy Steven Chu's SunShot Initiative, which seeks to achieve PV technologies that are cost-competitive without subsidies at large scale with fossil-based energy sources by the end of this decade. The Incubatormore » Project has enhanced U.S. PV manufacturing capacity and created more than 1200 clean energy jobs, resulting in an increase in American economic competitiveness. The investment raised to date by these PV Incubator companies as a result of DOE's $ 59 million investment totals nearly $ 1.3 billion.« less

Progress of the PV Technology Incubator Project Towards an Enhanced U.S. Manufacturing Base

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ullal, H.; Mitchell, R.; Keyes, B.

In this paper, we report on the major accomplishments of the U.S. Department of Energy's (DOE) Solar Energy Technologies Program (SETP) Photovoltaic (PV) Technology Incubator project. The Incubator project facilitates a company's transition from developing a solar cell or PV module prototype to pilot- and large-scale U.S. manufacturing. The project targets small businesses that have demonstrated proof-of-concept devices or processes in the laboratory. Their success supports U.S. Secretary of Energy Steven Chu's SunShot Initiative, which seeks to achieve PV technologies that are cost-competitive without subsidies at large scale with fossil-based energy sources by the end of this decade. The Incubatormore » Project has enhanced U.S. PV manufacturing capacity and created more than 1200 clean energy jobs, resulting in an increase in American economic competitiveness. The investment raised to date by these PV Incubator companies as a result of DOE's $ 59 million investment total nearly $ 1.3 billion.« less

Rural hospital information technology implementation for safety and quality improvement: lessons learned.

PubMed

Tietze, Mari F; Williams, Josie; Galimbertti, Marisa

2009-01-01

This grant involved a hospital collaborative for excellence using information technology over 3-year period. The project activities focused on the improvement of patient care safety and quality in Southern rural and small community hospitals through the use of technology and education. The technology component of the design involved the implementation of a Web-based business analytic tool that allows hospitals to view data, create reports, and analyze their safety and quality data. Through a preimplementation and postimplementation comparative design, the focus of the implementation team was twofold: to recruit participant hospitals and to implement the technology at each of the 66 hospital sites. Rural hospitals were defined as acute care hospitals located in a county with a population of less than 100 000 or a state-administered Critical Access Hospital, making the total study population target 188 hospitals. Lessons learned during the information technology implementation of these hospitals are reflective of the unique culture, financial characteristics, organizational structure, and technology architecture of rural hospitals. Specific steps such as recruitment, information technology assessment, conference calls for project planning, data file extraction and transfer, technology training, use of e-mail, use of telephones, personnel management, and engaging information technology vendors were found to vary greatly among hospitals.

Configuring the users of new HIV-prevention technologies: the case of HIV pre-exposure prophylaxis.

PubMed

Holt, Martin

2015-01-01

HIV pre-exposure prophylaxis (PrEP) is a prevention technology that involves prescribing antiretroviral drugs to HIV-negative people to protect them from infection. This paper considers how the development of the technology has necessitated the parallel configuration of its users, and how this process has affected the perception and uptake of the technology. In designing a technology, potential users are typically defined, enabled and constrained, partly to create a target population (or market) for the technology, but also to reassure people that it can be used safely and effectively. This process may or may not be helpful for the uptake and use of the technology. Published research on PrEP indicates that while the technology was under trial, the primary focus was on the 'at-risk' subject in need of PrEP, with little or no consideration of the other qualities necessary for successful use. Post-trial accounts of PrEP have begun to outline desirable qualities of successful PrEP use, such as caution, compliance and being organised. It appears that the PrEP user was only partially configured during the technology's development, and the initial focus on risk has done little to counter fears of the technology, which may partially account for its slow uptake.

Academic-industrial partnerships in drug discovery in the age of genomics.

PubMed

Harris, Tim; Papadopoulos, Stelios; Goldstein, David B

2015-06-01

Many US FDA-approved drugs have been developed through productive interactions between the biotechnology industry and academia. Technological breakthroughs in genomics, in particular large-scale sequencing of human genomes, is creating new opportunities to understand the biology of disease and to identify high-value targets relevant to a broad range of disorders. However, the scale of the work required to appropriately analyze large genomic and clinical data sets is challenging industry to develop a broader view of what areas of work constitute precompetitive research. Copyright © 2015 Elsevier Ltd. All rights reserved.

Urban Combat Advanced Training Technology (Technologie avancee d’entrainement au combat urbain)

DTIC Science & Technology

2015-07-01

Environmental Issues 2-1 2.6 Annex E – Effects Representation on Targets 2-2 2.7 Annex F – How to Create Vulnerability Models for Buildings and Vehicles 2-2...Modifications of the Standard Information Models 3-10 3.3.5 Why the RPR FOM 2 Might Not be Suitable for All Types of Integration 3-10 3.4 Implementation ...urban areas are the most likely battlefield in the 21st century. The problems and limitations associated with developing the first generation of

Traffic information computing platform for big data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duan, Zongtao, E-mail: ztduan@chd.edu.cn; Li, Ying, E-mail: ztduan@chd.edu.cn; Zheng, Xibin, E-mail: ztduan@chd.edu.cn

Big data environment create data conditions for improving the quality of traffic information service. The target of this article is to construct a traffic information computing platform for big data environment. Through in-depth analysis the connotation and technology characteristics of big data and traffic information service, a distributed traffic atomic information computing platform architecture is proposed. Under the big data environment, this type of traffic atomic information computing architecture helps to guarantee the traffic safety and efficient operation, more intelligent and personalized traffic information service can be used for the traffic information users.

Swingbed Amine Carbon Dioxide Removal Flight Experiment - Feasibility Study and Concept Development for Cost-Effective Exploration Technology Maturation on The International Space Station

NASA Technical Reports Server (NTRS)

Hodgson, Edward; Papale, William; Nalette, Timothy; Graf, John; Sweterlitsch, Jeffery; Hayley, Elizabeth; Williams, Antony; Button, Amy

2011-01-01

The completion of International Space Station Assembly and transition to a full six person crew has created the opportunity to create and implement flight experiments that will drive down the ultimate risks and cost for human space exploration by maturing exploration technologies in realistic space environments that are impossible or incredibly costly to duplicate in terrestrial laboratories. An early opportunity for such a technology maturation experiment was recognized in the amine swingbed technology baselined for carbon dioxide and humidity control on the Orion spacecraft and Constellation Spacesuit System. An experiment concept using an existing high fidelity laboratory swing bed prototype has been evaluated in a feasibility and concept definition study leading to the conclusion that the envisioned flight experiment can be both feasible and of significant value for NASA s space exploration technology development efforts. Based on the results of that study NASA has proceeded with detailed design and implementation for the flight experiment. The study effort included the evaluation of technology risks, the extent to which ISS provided unique opportunities to understand them, and the implications of the resulting targeted risks for the experiment design and operational parameters. Based on those objectives and characteristics, ISS safety and integration requirements were examined, experiment concepts developed to address them and their feasibility assessed. This paper will describe the analysis effort and conclusions and present the resulting flight experiment concept. The flight experiment, implemented by NASA and launched in two packages in January and August 2011, integrates the swing bed with supporting elements including electrical power and controls, sensors, cooling, heating, fans, air- and water-conserving functionality, and mechanical packaging structure. It is now on board the ISS awaiting installation and activation.

The Protein Structure Initiative Structural Biology Knowledgebase Technology Portal: a structural biology web resource.

PubMed

Gifford, Lida K; Carter, Lester G; Gabanyi, Margaret J; Berman, Helen M; Adams, Paul D

2012-06-01

The Technology Portal of the Protein Structure Initiative Structural Biology Knowledgebase (PSI SBKB; http://technology.sbkb.org/portal/ ) is a web resource providing information about methods and tools that can be used to relieve bottlenecks in many areas of protein production and structural biology research. Several useful features are available on the web site, including multiple ways to search the database of over 250 technological advances, a link to videos of methods on YouTube, and access to a technology forum where scientists can connect, ask questions, get news, and develop collaborations. The Technology Portal is a component of the PSI SBKB ( http://sbkb.org ), which presents integrated genomic, structural, and functional information for all protein sequence targets selected by the Protein Structure Initiative. Created in collaboration with the Nature Publishing Group, the SBKB offers an array of resources for structural biologists, such as a research library, editorials about new research advances, a featured biological system each month, and a functional sleuth for searching protein structures of unknown function. An overview of the various features and examples of user searches highlight the information, tools, and avenues for scientific interaction available through the Technology Portal.

Towards personal health care with model-guided medicine: long-term PPPM-related strategies and realisation opportunities within 'Horizon 2020'.

PubMed

Lemke, Heinz U; Golubnitschaja, Olga

2014-01-01

At the international EPMA Summit carried out in the EU Parliament (September 2013), the main challenges in Predictive, Preventive and Personalised Medicine have been discussed and strategies outlined in order to implement scientific and technological innovation in medicine and healthcare utilising new strategic programmes such as 'Horizon 2020'. The joint EPMA (European Association for Predictive, Preventive and Personalised Medicine) / IFCARS (International Foundation for Computer Assisted Radiology and Surgery) paper emphasises the consolidate position of the leading experts who are aware of the great responsibility of being on a forefront of predictive, preventive and personalised medicine. Both societies consider long-term international partnerships and multidisciplinary projects to create PPPM relevant innovation in science, technological tools and practical implementation in healthcare. Personalisation in healthcare urgently needs innovation in design of PPPM-related medical services, new products, research, education, didactic materials, propagation of targeted prevention in the society and treatments tailored to the person. For the paradigm shift from delayed reactive to predictive, preventive and personalised medicine, a new culture should be created in communication between individual professional domains, between doctor and patient, as well as in communication with individual social (sub)groups and patient cohorts. This is a long-term mission in personalised healthcare with the whole spectrum of instruments available and to be created in the field.

Towards personal health care with model-guided medicine: long-term PPPM-related strategies and realisation opportunities within ‘Horizon 2020’

PubMed Central

2014-01-01

At the international EPMA Summit carried out in the EU Parliament (September 2013), the main challenges in Predictive, Preventive and Personalised Medicine have been discussed and strategies outlined in order to implement scientific and technological innovation in medicine and healthcare utilising new strategic programmes such as ‘Horizon 2020’. The joint EPMA (European Association for Predictive, Preventive and Personalised Medicine) / IFCARS (International Foundation for Computer Assisted Radiology and Surgery) paper emphasises the consolidate position of the leading experts who are aware of the great responsibility of being on a forefront of predictive, preventive and personalised medicine. Both societies consider long-term international partnerships and multidisciplinary projects to create PPPM relevant innovation in science, technological tools and practical implementation in healthcare. Personalisation in healthcare urgently needs innovation in design of PPPM-related medical services, new products, research, education, didactic materials, propagation of targeted prevention in the society and treatments tailored to the person. For the paradigm shift from delayed reactive to predictive, preventive and personalised medicine, a new culture should be created in communication between individual professional domains, between doctor and patient, as well as in communication with individual social (sub)groups and patient cohorts. This is a long-term mission in personalised healthcare with the whole spectrum of instruments available and to be created in the field. PMID:24883142

ENVRI PLUS: European initiative towards technical and research cultural solutions for across-disciplines accessible Research Infrastructure products

NASA Astrophysics Data System (ADS)

Asmi, A.; Kutsch, W. L.

2015-12-01

Environmental Research Infrastructures are often built as bottom-up initiatives to provide products for specific target group, which often is very discipline specific. However, the societal or environmental challenges are typically not concentrated on specific disciplines, and require usage of data sets from many RIs. ENVRI PLUS is an initiative where the European environmental RIs work together to provide common technical background (in physical observation technologies and in data products and descriptions) to make the RI products more usable to user groups outside of the original RI target groups. ENVRI PLUS also includes many policy and dissemination concentrated actions to make the RI operations coherent and understandable to both scientists and other potential users. The actions include building common technological capital of the RIs (physical and data-oriented), creating common access procedures (especially for cross-diciplinary access), developing ethical guidelines and related policies, distributing know-how between RIs and building common communication and collaboration system for European environmental RIs. All ENVRI PLUS products are free to use, e.g. for use of new or existing environmental RIs worldwide.

Science & Technology Review September 2006

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radousky, H B

2006-07-18

This month's article has the following articles: (1) Simulations Help Plan for Large Earthquakes--Commentary by Jane C. S. Long; (2) Re-creating the 1906 San Francisco Earthquake--Supercomputer simulations of Bay Area earthquakes are providing insight into the great 1906 quake and future temblors along several faults; (3) Decoding the Origin of a Bioagent--The microstructure of a bacterial organism can be linked to the methods used to formulate the pathogen; (4) A New Look at How Aging Bones Fracture--Livermore scientists find that the increased risk of fracture from osteoporosis may be due to a change in the physical structure of trabecular bone;more » and (5) Fusion Targets on the Double--Advances in precision manufacturing allow the production of double-shell fusion targets with submicrometer tolerances.« less

Evolution of Force Sensing Technologies.

PubMed

Shah, Dipen

2017-06-01

In order to Improve the procedural success and long-term outcomes of catheter ablation techniques for atrial fibrillation (AF), an Important unfulfilled requirement is to create durable electrophysiologically complete lesions. Measurement of contact force (CF) between the catheter tip and the target tissue can guide physicians to optimise both mapping and ablation procedures. Contact force can affect lesion size and clinical outcomes following catheter ablation of AF. Force sensing technologies have matured since their advent several years ago, and now allow the direct measurement of CF between the catheter tip and the target myocardium in real time. In order to obtain complete durable lesions, catheter tip spatial stability and stable contact force are important. Suboptimal energy delivery, lesion density/contiguity and/or excessive wall thickness of the pulmonary vein-left atrial (PV-LA) junction may result in conduction recovery at these sites. Lesion assessment tools may help predict and localise electrical weak points resulting in conduction recovery during and after ablation. There is increasing clinical evidence to show that optimal use of CF sensing during ablation can reduce acute PV re-conduction, although prospective randomised studies are desirable to confirm long-term favourable clinical outcomes. In combination with optimised lesion assessment tools, contact force sensing technology has the potential to become the standard of care for all patients undergoing AF catheter ablation.

Expanding the Security Dimension of Surety

DOE Office of Scientific and Technical Information (OSTI.GOV)

SENGLAUB, MICHAEL E.

1999-10-01

A small effort was conducted at Sandia National Laboratories to explore the use of a number of modern analytic technologies in the assessment of terrorist actions and to predict trends. This work focuses on Bayesian networks as a means of capturing correlations between groups, tactics, and targets. The data that was used as a test of the methodology was obtained by using a special parsing algorithm written in JAVA to create records in a database from information articles captured electronically. As a vulnerability assessment technique the approach proved very useful. The technology also proved to be a valuable development mediummore » because of the ability to integrate blocks of information into a deployed network rather than waiting to fully deploy only after all relevant information has been assembled.« less

New ultraportable display technology and applications

NASA Astrophysics Data System (ADS)

Alvelda, Phillip; Lewis, Nancy D.

1998-08-01

MicroDisplay devices are based on a combination of technologies rooted in the extreme integration capability of conventionally fabricated CMOS active-matrix liquid crystal display substrates. Customized diffraction grating and optical distortion correction technology for lens-system compensation allow the elimination of many lenses and systems-level components. The MicroDisplay Corporation's miniature integrated information display technology is rapidly leading to many new defense and commercial applications. There are no moving parts in MicroDisplay substrates, and the fabrication of the color generating gratings, already part of the CMOS circuit fabrication process, is effectively cost and manufacturing process-free. The entire suite of the MicroDisplay Corporation's technologies was devised to create a line of application- specific integrated circuit single-chip display systems with integrated computing, memory, and communication circuitry. Next-generation portable communication, computer, and consumer electronic devices such as truly portable monitor and TV projectors, eyeglass and head mounted displays, pagers and Personal Communication Services hand-sets, and wristwatch-mounted video phones are among the may target commercial markets for MicroDisplay technology. Defense applications range from Maintenance and Repair support, to night-vision systems, to portable projectors for mobile command and control centers.

The interface between forensic science and technology: how technology could cause a paradigm shift in the role of forensic institutes in the criminal justice system

PubMed Central

Kloosterman, Ate; Mapes, Anna; Geradts, Zeno; van Eijk, Erwin; Koper, Carola; van den Berg, Jorrit; Verheij, Saskia; van der Steen, Marcel; van Asten, Arian

2015-01-01

In this paper, the importance of modern technology in forensic investigations is discussed. Recent technological developments are creating new possibilities to perform robust scientific measurements and studies outside the controlled laboratory environment. The benefits of real-time, on-site forensic investigations are manifold and such technology has the potential to strongly increase the speed and efficacy of the criminal justice system. However, such benefits are only realized when quality can be guaranteed at all times and findings can be used as forensic evidence in court. At the Netherlands Forensic Institute, innovation efforts are currently undertaken to develop integrated forensic platform solutions that allow for the forensic investigation of human biological traces, the chemical identification of illicit drugs and the study of large amounts of digital evidence. These platforms enable field investigations, yield robust and validated evidence and allow for forensic intelligence and targeted use of expert capacity at the forensic institutes. This technological revolution in forensic science could ultimately lead to a paradigm shift in which a new role of the forensic expert emerges as developer and custodian of integrated forensic platforms. PMID:26101289

A Qualitative Study of Technology-Based Training in Organizations that Hire Agriculture and Life Sciences Students

ERIC Educational Resources Information Center

Bedgood, Leslie; Murphrey, Theresa Pesl; Dooley, Kim E.

2008-01-01

Technological advances have created unlimited opportunities in education. Training and technology have merged to create new methods referred to as technology-based training. The purpose of this study was to identify organizations that hire agriculture and life sciences students for positions involving technology-based training and identify…

Development of novel drug delivery systems using phage display technology for clinical application of protein drugs.

PubMed

Nagano, Kazuya; Tsutsumi, Yasuo

2016-01-01

Attempts are being made to develop therapeutic proteins for cancer, hepatitis, and autoimmune conditions, but their clinical applications are limited, except in the cases of drugs based on erythropoietin, granulocyte colony-stimulating factor, interferon-alpha, and antibodies, owing to problems with fundamental technologies for protein drug discovery. It is difficult to identify proteins useful as therapeutic seeds or targets. Another problem in using bioactive proteins is pleiotropic actions through receptors, making it hard to elicit desired effects without side effects. Additionally, bioactive proteins have poor therapeutic effects owing to degradation by proteases and rapid excretion from the circulatory system. Therefore, it is essential to establish a series of novel drug delivery systems (DDS) to overcome these problems. Here, we review original technologies in DDS. First, we introduce antibody proteomics technology for effective selection of proteins useful as therapeutic seeds or targets and identification of various kinds of proteins, such as cancer-specific proteins, cancer metastasis-related proteins, and a cisplatin resistance-related protein. Especially Ephrin receptor A10 is expressed in breast tumor tissues but not in normal tissues and is a promising drug target potentially useful for breast cancer treatment. Moreover, we have developed a system for rapidly creating functional mutant proteins to optimize the seeds for therapeutic applications and used this system to generate various kinds of functional cytokine muteins. Among them, R1antTNF is a TNFR1-selective antagonistic mutant of TNF and is the first mutein converted from agonist to antagonist. We also review a novel polymer-conjugation system to improve the in vivo stability of bioactive proteins. Site-specific PEGylated R1antTNF is uniform at the molecular level, and its bioactivity is similar to that of unmodified R1antTNF. In the future, we hope that many innovative protein drugs will be developed by combining these technologies.

From R&D to the mouth--a viable roadmap for the technology era.

PubMed

Simon, M

1996-09-01

This article serves as an overview of the status of dental technology as the profession approaches a new century. Its purpose is to define various ways in which dental manufacturers and marketers can better understand the thinking of the dental professional, those factors that influence their thought processes and how to use this information to develop more effective and predictive marketing strategies. With the advent of more complex and expensive dental technologies, e.g., video imaging, digitized radiology, electronic data transmission, etc., the dentist is faced with a variety of decisions relating to purchasing, implementation and costs/benefits analysis that go beyond the normal daily concerns of delivering competent dental care. It is no longer enough for a manufacturer to make a good product; successful marketing strategies must also include a means for guiding the dentist in the successful integration of these technologies into their offices. In order for dental marketers to meet the competitive demands of this advanced technology era, there must be a commitment to the development of strategic information through the use of third party, customized marketing research. Too much of the input currently used to develop marketing strategies is anecdotal, inherently biased and often not representative of the target market as a whole. It is hoped that this article will effectively challenge the reader to look at the development of dental products and services from a somewhat different, less traditional perspective and that it will provide the impetus and direction for creating better targeted and more rewarding marketing strategies.

CRISPRscan: designing highly efficient sgRNAs for CRISPR/Cas9 targeting in vivo

PubMed Central

Moreno-Mateos, Miguel A.; Vejnar, Charles E.; Beaudoin, Jean-Denis; Fernandez, Juan P.; Mis, Emily K.; Khokha, Mustafa K.; Giraldez, Antonio J.

2015-01-01

CRISPR/Cas9 technology provides a powerful system for genome engineering. However, variable activity across different single guide RNAs (sgRNAs) remains a significant limitation. We have analyzed the molecular features that influence sgRNA stability, activity and loading into Cas9 in vivo. We observe that guanine enrichment and adenine depletion increase sgRNA stability and activity, while loading, nucleosome positioning and Cas9 off-target binding are not major determinants. We additionally identified truncated and 5′ mismatch-containing sgRNAs as efficient alternatives to canonical sgRNAs. Based on these results, we created a predictive sgRNA-scoring algorithm (CRISPRscan.org) that effectively captures the sequence features affecting Cas9/sgRNA activity in vivo. Finally, we show that targeting Cas9 to the germ line using a Cas9-nanos-3′-UTR fusion can generate maternal-zygotic mutants, increase viability and reduce somatic mutations. Together, these results provide novel insights into the determinants that influence Cas9 activity and a framework to identify highly efficient sgRNAs for genome targeting in vivo. PMID:26322839

The String Stability of a Trajectory-Based Interval Management Algorithm in the Midterm Airspace

NASA Technical Reports Server (NTRS)

Swieringa, Kurt A.

2015-01-01

NASA's first Air Traffic Management (ATM) Technology Demonstration (ATD-1) was created to facilitate the transition of mature ATM technologies from the laboratory to operational use. The technologies selected for demonstration are the Traffic Management Advisor with Terminal Metering (TMA-TM), which provides precise time-based scheduling in the terminal airspace; Controller Managed Spacing (CMS), which provides terminal controllers with decision support tools enabling precise schedule conformance; and Interval Management (IM), which consists of flight deck automation that enables aircraft to achieve or maintain a precise spacing interval behind a target aircraft. As the percentage of IM equipped aircraft increases, controllers may provide IM clearances to sequences, or strings, of IM-equipped aircraft. It is important for these strings to maintain stable performance. This paper describes an analytic analysis of the string stability of the latest version of NASA's IM algorithm and a fast-time simulation designed to characterize the string performance of the IM algorithm. The analytic analysis showed that the spacing algorithm has stable poles, indicating that a spacing error perturbation will be reduced as a function of string position. The fast-time simulation investigated IM operations at two airports using constraints associated with the midterm airspace, including limited information of the target aircraft's intended speed profile and limited information of the wind forecast on the target aircraft's route. The results of the fast-time simulation demonstrated that the performance of the spacing algorithm is acceptable for strings of moderate length; however, there is some degradation in IM performance as a function of string position.

Targeting mammalian organelles with internalizing phage (iPhage) libraries

PubMed Central

Rangel, Roberto; Dobroff, Andrey S.; Guzman-Rojas, Liliana; Salmeron, Carolina C.; Gelovani, Juri G.; Sidman, Richard L.; Pasqualini, Renata; Arap, Wadih

2015-01-01

Techniques largely used for protein interaction studies and discovery of intracellular receptors, such as affinity capture complex purification and yeast two-hybrid, may produce inaccurate datasets due to protein insolubility, transient or weak protein interactions, or irrelevant intracellular context. A versatile tool to overcome these limitations as well as to potentially create vaccines and engineer peptides and antibodies as targeted diagnostic and therapeutic agents, is the phage display technique. We have recently developed a new technology for screening internalizing phage (iPhage) vectors and libraries utilizing a ligand/receptor-independent mechanism to penetrate eukaryotic cells. iPhage particles provide a unique discovery platform for combinatorial intracellular targeting of organelle ligands along with their corresponding receptors and to fingerprint functional protein domains in living cells. Here we explain the design, cloning, construction, and production of iPhage-based vectors and libraries, along with basic ligand-receptor identification and validation methodologies for organelle receptors. An iPhage library screening can be performed in ~8 weeks. PMID:24030441

Creating a Technologically Literate Classroom: Professional's Guide. Teacher Created Materials No. 887.

ERIC Educational Resources Information Center

Garfield, Gary M.; McDonough, Suzanne

This book discusses how to effectively integrate technology into the classroom. It examines the benefits of curriculum development utilizing technology and presents sample learning activities. Highlights include: technology's past and present role in education; access to computers; the roles of teacher and learner; professional development;…

Medical-grade Sterilizable Target for Fluid-immersed Fetoscope Optical Distortion Calibration.

PubMed

Nikitichev, Daniil I; Shakir, Dzhoshkun I; Chadebecq, François; Tella, Marcel; Deprest, Jan; Stoyanov, Danail; Ourselin, Sébastien; Vercauteren, Tom

2017-02-23

We have developed a calibration target for use with fluid-immersed endoscopes within the context of the GIFT-Surg (Guided Instrumentation for Fetal Therapy and Surgery) project. One of the aims of this project is to engineer novel, real-time image processing methods for intra-operative use in the treatment of congenital birth defects, such as spina bifida and the twin-to-twin transfusion syndrome. The developed target allows for the sterility-preserving optical distortion calibration of endoscopes within a few minutes. Good optical distortion calibration and compensation are important for mitigating undesirable effects like radial distortions, which not only hamper accurate imaging using existing endoscopic technology during fetal surgery, but also make acquired images less suitable for potentially very useful image computing applications, like real-time mosaicing. In this paper proposes a novel fabrication method to create an affordable, sterilizable calibration target suitable for use in a clinical setup. This method involves etching a calibration pattern by laser cutting a sandblasted stainless steel sheet. This target was validated using the camera calibration module provided by OpenCV, a state-of-the-art software library popular in the computer vision community.

Medical-grade Sterilizable Target for Fluid-immersed Fetoscope Optical Distortion Calibration

PubMed Central

Chadebecq, François; Tella, Marcel; Deprest, Jan; Stoyanov, Danail; Ourselin, Sébastien; Vercauteren, Tom

2017-01-01

We have developed a calibration target for use with fluid-immersed endoscopes within the context of the GIFT-Surg (Guided Instrumentation for Fetal Therapy and Surgery) project. One of the aims of this project is to engineer novel, real-time image processing methods for intra-operative use in the treatment of congenital birth defects, such as spina bifida and the twin-to-twin transfusion syndrome. The developed target allows for the sterility-preserving optical distortion calibration of endoscopes within a few minutes. Good optical distortion calibration and compensation are important for mitigating undesirable effects like radial distortions, which not only hamper accurate imaging using existing endoscopic technology during fetal surgery, but also make acquired images less suitable for potentially very useful image computing applications, like real-time mosaicing. In this paper proposes a novel fabrication method to create an affordable, sterilizable calibration target suitable for use in a clinical setup. This method involves etching a calibration pattern by laser cutting a sandblasted stainless steel sheet. This target was validated using the camera calibration module provided by OpenCV, a state-of-the-art software library popular in the computer vision community. PMID:28287588

The new threat of digital marketing.

PubMed

Montgomery, Kathryn C; Chester, Jeff; Grier, Sonya A; Dorfman, Lori

2012-06-01

Because of their avid use of new media and their increased spending power, children and teens have become primary targets of a new "media and marketing ecosystem." The digital marketplace is undergoing rapid innovation as new technologies and software applications continue to reshape the media landscape and user behaviors. The advertising industry, in many instances led by food and beverage marketers, is purposefully exploiting the special relationship that youth have with new media, as online marketing campaigns create unprecedented intimacies between adolescents and the brands and products that now literally surround them. Copyright © 2012 Elsevier Inc. All rights reserved.

Opportunities and Challenges of Digital Technology for HIV Treatment and Prevention.

PubMed

Simoni, Jane M; Kutner, Bryan A; Horvath, Keith J

2015-12-01

Novel eHealth interventions are creating exciting opportunities for health promotion along the continuum of HIV care and prevention. Reviews of recent work indicate the use of multiple platforms (e.g., smartphones, social media), with trends toward individualized approaches and real-time assessments. However, the field needs more rigorous investigations to provide evidence of long-term impact on clinical indicators and should expand its targets beyond men who have sex with men and medication adherence. Challenges to the field include working within restricted funding timelines and disseminating eHealth interventions to those most in need.

Virus-based nanoparticles as platform technologies for modern vaccines

PubMed Central

Lee, Karin L.; Twyman, Richard M.; Fiering, Steven

2017-01-01

Nanoscale engineering is revolutionizing the development of vaccines and immunotherapies. Viruses have played a key role in this field because they can function as prefabricated nanoscaffolds with unique properties that are easy to modify. Viruses are immunogenic through multiple pathways, and antigens displayed naturally or by engineering on the surface can be used to create vaccines against the cognate virus, other pathogens, specific molecules or cellular targets such as tumors. This review focuses on the development of virus-based nanoparticle systems as vaccines indicated for the prevention or treatment of infectious diseases, chronic diseases, cancer, and addiction. PMID:26782096

The Southeastern Minnesota Beacon Project for Community-driven Health Information Technology: Origins, Achievements, and Legacy

PubMed Central

Chute, Christopher G.; Hart, Lacey A.; Alexander, Alex K.; Jensen, Daniel W.

2014-01-01

Introduction: The Southeastern (SE) Minnesota Beacon organized all the health care providers, county public health organizations, and school districts in the deployment and integration of health information exchange (HIE) and targeted health communication around childhood asthma and diabetes. The community cooperated to establish a clinical data repository for all residents in the 11-county region. Through this community of practice approach that involved traditional and nontraditional providers, the SE Minnesota Beacon was able to realize unique applications of this technology. This manuscript overviews the associated organization and infrastructure of this community collaboration. Background: The Office of the National Coordinator for Health Information Technology (ONC), as part of the American Recovery and Reinvestment Act of 2009 (ARRA) stimulus, established 17 projects throughout the United States targeting the introduction and meaningful use of health information technology (HIT). These 17 communities were intended to serve as an example of what could be accomplished. The SE Minnesota Beacon is one of these communities. Methods: The community ultimately opted for peer-to-peer HIE, using Nationwide Health Information Network (NwHIN) Connect software. The clinical data repository was established using the infrastructure developed by the Regenstrief Institute, which operated as a trusted third party. As an extension to HIE, the consortium of county public health departments created a patient data portal for use by school nurses and parents. Childhood asthma was addressed by creating, exchanging, and maintaining an “asthma action plan” for each affected child, shared throughout the community, including through the patient portal. Diabetes management introduced patient treatment decision tools and patient quality of life measures, facilitating care. Influenza vaccination was enhanced by large-scale community reporting in partnership with the state vaccination registry. The methodology and principles for arriving at these solutions included community engagement, sustainability, scalability, standards, and best practices that fit a variety of organizations—from large, robust providers to small organizations. Findings: The SE Minnesota Beacon demonstrated that all providers for a geographically defined population can cooperate in the development and shared governance of a low-cost, sustainable HIE, and the operation of a community-managed clinical data repository. Furthermore, these infrastructures can be leveraged to collaboratively improve the care of patients, as demonstrated for childhood asthma and adult diabetes mellitus. Conclusion: The shared governance of HIT by a community can palpably change the scope and success of collaborations targeted to improve patient and community health care. PMID:25848625

Combining instrumental and contextual approaches: nanotechnology and sustainable development.

PubMed

Liao, Nina

2009-01-01

Billions of people live in poverty, with no access to safe drinking water or solutions for other critical health and medical needs. Nanotechnology is poised to create workable solutions for large-scale public health needs in developing countries, including improving water quality and providing life-saving pharmaceuticals. There are two views on how emerging technologies such as nanotechnology can influence and affect developing countries. Instrumentalists believe that the international community can transfer nanotechnology from one context to another and use it to assist the poor. Contextualists warn that nanotechnology can increase inequality in underdeveloped regions. Because of inadequacies in both positions, the international community must adopt a mixed strategy. This article argues that this mixed strategy should target the bottom of the pyramid, develop native capability, implement emergency protocols in projects, create accountability, and engage the public. Managed well, this strategy can propel developing countries toward sustainable development.

Comparing Natural Gas Leakage Detection Technologies Using an Open-Source "Virtual Gas Field" Simulator.

PubMed

Kemp, Chandler E; Ravikumar, Arvind P; Brandt, Adam R

2016-04-19

We present a tool for modeling the performance of methane leak detection and repair programs that can be used to evaluate the effectiveness of detection technologies and proposed mitigation policies. The tool uses a two-state Markov model to simulate the evolution of methane leakage from an artificial natural gas field. Leaks are created stochastically, drawing from the current understanding of the frequency and size distributions at production facilities. Various leak detection and repair programs can be simulated to determine the rate at which each would identify and repair leaks. Integrating the methane leakage over time enables a meaningful comparison between technologies, using both economic and environmental metrics. We simulate four existing or proposed detection technologies: flame ionization detection, manual infrared camera, automated infrared drone, and distributed detectors. Comparing these four technologies, we found that over 80% of simulated leakage could be mitigated with a positive net present value, although the maximum benefit is realized by selectively targeting larger leaks. Our results show that low-cost leak detection programs can rely on high-cost technology, as long as it is applied in a way that allows for rapid detection of large leaks. Any strategy to reduce leakage should require a careful consideration of the differences between low-cost technologies and low-cost programs.

Rapid prototyping of microchannels with surface patterns for fabrication of polymer fibers

DOE PAGES

Goodrich, Payton J.; Sharifi, Farrokh; Hashemi, Nastaran

2015-08-14

Microfluidic technology has provided innovative solutions to numerous problems, but the cost of designing and fabricating microfluidic channels is impeding its expansion. In this study, Shrinky-Dink thermoplastic sheets are used to create multilayered complex templates for microfluidic channels. We also used inkjet and laserjet printers to raise a predetermined microchannel geometry by depositing several layers of ink for each feature consecutively. We achieved feature heights over 100 μm, which were measured and compared with surface profilometry. Templates closest to the target geometry were then used to create microfluidic devices from soft-lithography with the molds as a template. These microfluidic devicesmore » were, futhermore used to fabricate polymer microfibers using the microfluidic focusing approach to demonstrate the potential that this process has for microfluidic applications. Finally, an economic analysis was conducted to compare the price of common microfluidic template manufacturing methods. We showed that multilayer microchannels can be created significantly quicker and cheaper than current methods for design prototyping and point-of-care applications in the biomedical area.« less

Research and Development of External Occultor Technology for the Direct Observation of Extrasolar Planetary Systems : JPL Starshades Project

NASA Technical Reports Server (NTRS)

Franz, Herbert; Stadeler, Mehnert

2012-01-01

Our group conducted work during the Summer of 2012 assembling and developing JPL's Starshades Project under the Technology Development for Exoplanet Missions(TDEM) initiative created by NASA, specifically TDEM stage 2. The goal of the work conducted at JPL by our group was to construct four occultor petals, the main optical components of the Starshade, for the analysis of joint deployment characteristics and of mechanical strain. A Starshade is an optical structure measuring approximately 30 meters in diameter that uses the effects of light diffraction off sheer edges, light scattering, and negative interference between waves to negate all on-axis light in a telescope's image, providing very high contrast that allows planets orbiting a target star to be observed. We completed our engineering goals in the time span of 10 weeks, during which the assembly processes of manufacture, alignment, and structural bonding took place. The Starshade technology and construction process is further discussed in the body of this paper.

Using virtual reality to improve walking post-stroke: translation to individuals with diabetes.

PubMed

Deutsch, Judith E

2011-03-01

Use of virtual reality (VR) technology to improve walking for people post-stroke has been studied for its clinical application since 2004. The hardware and software used to create these systems has varied but has predominantly been constituted by projected environments with users walking on treadmills. Transfer of training from the virtual environment to real-world walking has modest but positive research support. Translation of the research findings to clinical practice has been hampered by commercial availability and costs of the VR systems. Suggestions for how the work for individuals post-stroke might be applied and adapted for individuals with diabetes and other impaired ambulatory conditions include involvement of the target user groups (both practitioners and clients) early in the design and integration of activity and education into the systems. © 2011 Diabetes Technology Society.

Leveraging Simulation Against the F-16 Flying Training Gap

DTIC Science & Technology

2005-11-01

must leverage emerging simulation technology into combined flight training to counter mission employment complexity created by technology itself...two or more of these stand-alone simulators creates a mission training center (MTC), which when further networked create distributed mission...operations (DMO). Ultimately, the grand operational vision of DMO is to interconnect non-collocated users creating a “virtual” joint training environment

Reviews on laser cutting technology for industrial applications

NASA Astrophysics Data System (ADS)

Muangpool, T.; Pullteap, S.

2018-03-01

In this paper, an overview of the laser technology applied for the industrial has been reviewed. In general, this technology was used in several engineering applications such as industrial, medical, science, research sectors, etc. Focusing on the laser technology in the industrial section, it was, normally, employed for many purposes i.e. target marking, welding, drilling, and also cutting. Consequently, the laser cutting technology was, however, divided into three classifications YAG, CO2, and fiber laser, respectively. Each laser types have different advantages and disadvantages depending on the material type. The advantages by using laser cutting compared with the general cutting machines were exploited in terms of narrow kerf, high cutting speed, low heat-affected zone (HAZ), improve efficiency of the cutting process, high accuracy, etc. However, the main objectives from the technology used were increasing of the products and also decreasing the production cost. In the opposite way, some disadvantages of the technology were summarized by complexity to operate, high maintenance cost, and also high power consumption. In Thailand industry, there were many factories used this technology as a cutting process. Unfortunately, only few researches were published. It might explains that this technology were difficulty to develop, high investment, and also easy to import from aboard. For becoming to the Thailand 4.0 community, the Thailand industry might awareness to reduce the importing machine and boosting some policies to create novel innovative / know-how from the own country.

An electromagnetic noncontacting sensor for thickness measurement in a dispersive medium

NASA Technical Reports Server (NTRS)

Chufo, Robert L.

1994-01-01

This paper describes a general purpose imaging technology developed by the U.S. Bureau of Mines (USBM) that, when fully implemented, will solve the general problem of 'seeing into the earth.' A first-generation radar coal thickness sensor, the RCTS-1, has been developed and field-tested in both underground and highwall mines. The noncontacting electromagnetic technique uses spatial modulation created by moving a simple sensor antenna in a direction along each axis to be measured while the complex reflection coefficient is measured at multiple frequencies over a two-to-one bandwidth. The antenna motion imparts spatial modulation to the data that enables signal processing to solve the problems of media, target, and antenna dispersion. Knowledge of the dielectric constant of the media is not necessary because the electrical properties of the media are determined automatically along with the distance to the target and thickness of each layer of the target. The sensor was developed as a navigation guidance sensor to accurately detect the coal/noncoal interface required for the USBM computer-assisted mining machine program. Other mining applications include the location of rock fractures, water-filled voids, and abandoned gas wells. These hazards can be detected in advance of the mining operation. This initiating technology is being expanded into a full three-dimensional (3-D) imaging system that will have applications in both the underground and surface environment.

Final Report for Bio-Inspired Approaches to Moving-Target Defense Strategies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fink, Glenn A.; Oehmen, Christopher S.

This report records the work and contributions of the NITRD-funded Bio-Inspired Approaches to Moving-Target Defense Strategies project performed by Pacific Northwest National Laboratory under the technical guidance of the National Security Agency’s R6 division. The project has incorporated a number of bio-inspired cyber defensive technologies within an elastic framework provided by the Digital Ants. This project has created the first scalable, real-world prototype of the Digital Ants Framework (DAF)[11] and integrated five technologies into this flexible, decentralized framework: (1) Ant-Based Cyber Defense (ABCD), (2) Behavioral Indicators, (3) Bioinformatic Clas- sification, (4) Moving-Target Reconfiguration, and (5) Ambient Collaboration. The DAF canmore » be used operationally to decentralize many such data intensive applications that normally rely on collection of large amounts of data in a central repository. In this work, we have shown how these component applications may be decentralized and may perform analysis at the edge. Operationally, this will enable analytics to scale far beyond current limitations while not suffering from the bandwidth or computational limitations of centralized analysis. This effort has advanced the R6 Cyber Security research program to secure digital infrastructures by developing a dynamic means to adaptively defend complex cyber systems. We hope that this work will benefit both our client’s efforts in system behavior modeling and cyber security to the overall benefit of the nation.« less

Modern drug discovery technologies: opportunities and challenges in lead discovery.

PubMed

Guido, Rafael V C; Oliva, Glaucius; Andricopulo, Adriano D

2011-12-01

The identification of promising hits and the generation of high quality leads are crucial steps in the early stages of drug discovery projects. The definition and assessment of both chemical and biological space have revitalized the screening process model and emphasized the importance of exploring the intrinsic complementary nature of classical and modern methods in drug research. In this context, the widespread use of combinatorial chemistry and sophisticated screening methods for the discovery of lead compounds has created a large demand for small organic molecules that act on specific drug targets. Modern drug discovery involves the employment of a wide variety of technologies and expertise in multidisciplinary research teams. The synergistic effects between experimental and computational approaches on the selection and optimization of bioactive compounds emphasize the importance of the integration of advanced technologies in drug discovery programs. These technologies (VS, HTS, SBDD, LBDD, QSAR, and so on) are complementary in the sense that they have mutual goals, thereby the combination of both empirical and in silico efforts is feasible at many different levels of lead optimization and new chemical entity (NCE) discovery. This paper provides a brief perspective on the evolution and use of key drug design technologies, highlighting opportunities and challenges.

Negative CO2 emissions via enhanced silicate weathering in coastal environments

PubMed Central

Montserrat, Francesc

2017-01-01

Negative emission technologies (NETs) target the removal of carbon dioxide (CO2) from the atmosphere, and are being actively investigated as a strategy to limit global warming to within the 1.5–2°C targets of the 2015 UN climate agreement. Enhanced silicate weathering (ESW) proposes to exploit the natural process of mineral weathering for the removal of CO2 from the atmosphere. Here, we discuss the potential of applying ESW in coastal environments as a climate change mitigation option. By deliberately introducing fast-weathering silicate minerals onto coastal sediments, alkalinity is released into the overlying waters, thus creating a coastal CO2 sink. Compared with other NETs, coastal ESW has the advantage that it counteracts ocean acidification, does not interfere with terrestrial land use and can be directly integrated into existing coastal management programmes with existing (dredging) technology. Yet presently, the concept is still at an early stage, and so two major research challenges relate to the efficiency and environmental impact of ESW. Dedicated experiments are needed (i) to more precisely determine the weathering rate under in situ conditions within the seabed and (ii) to evaluate the ecosystem impacts—both positive and negative—from the released weathering products. PMID:28381634

Creating an X Window Terminal-Based Information Technology Center.

ERIC Educational Resources Information Center

Klassen, Tim W.

1997-01-01

The creation of an information technology center at the University of Oregon Science Library is described. Goals included providing access to Internet-based resources and multimedia software, platforms for running science-oriented software, and resources so students can create multimedia materials. A mixed-lab platform was created with Unix-based…

Genome engineering via homologous recombination in mouse embryonic stem (ES) cells: an amazingly versatile tool for the study of mammalian biology.

PubMed

Babinet, C; Cohen-Tannoudji, M

2001-09-01

The ability to introduce genetic modifications in the germ line of complex organisms has been a long-standing goal of those who study developmental biology. In this regard, the mouse, a favorite model for the study of the mammals, is unique: indeed not only is it possible since the late seventies, to add genes to the mouse genome like in several other complex organisms but also to perform gene replacement and modification. This has been made possible via two technological breakthroughs: 1) the isolation and culture of embryonic stem cells (ES), which have the unique ability to colonize all the tissues of an host embryo including its germ line; 2) the development of methods allowing homologous recombination between an incoming DNA and its cognate chromosomal sequence (gene "targeting"). As a result, it has become possible to create mice bearing null mutations in any cloned gene (knock-out mice). Such a possibility has revolutionized the genetic approach of almost all aspects of the biology of the mouse. In recent years, the scope of gene targeting has been widened even more, due to the refinement of the knock-out technology: other types of genetic modifications may now be created, including subtle mutations (point mutations, micro deletions or insertions, etc.) and chromosomal rearrangements such as large deletions, duplications and translocations. Finally, methods have been devised which permit the creation of conditional mutations, allowing the study of gene function throughout the life of an animal, when gene inactivation entails embryonic lethality. In this paper, we present an overview of the methods and scenarios used for the programmed modification of mouse genome, and we underline their enormous interest for the study of mammalian biology.

Applying systems engineering methodologies to the micro- and nanoscale realm

NASA Astrophysics Data System (ADS)

Garrison Darrin, M. Ann

2012-06-01

Micro scale and nano scale technology developments have the potential to revolutionize smart and small systems. The application of systems engineering methodologies that integrate standalone, small-scale technologies and interface them with macro technologies to build useful systems is critical to realizing the potential of these technologies. This paper covers the expanding knowledge base on systems engineering principles for micro and nano technology integration starting with a discussion of the drivers for applying a systems approach. Technology development on the micro and nano scale has transition from laboratory curiosity to the realization of products in the health, automotive, aerospace, communication, and numerous other arenas. This paper focuses on the maturity (or lack thereof) of the field of nanosystems which is emerging in a third generation having transitioned from completing active structures to creating systems. The emphasis of applying a systems approach focuses on successful technology development based on the lack of maturity of current nano scale systems. Therefore the discussion includes details relating to enabling roles such as product systems engineering and technology development. Classical roles such as acquisition systems engineering are not covered. The results are also targeted towards small-scale technology developers who need to take into account systems engineering processes such as requirements definition, verification, and validation interface management and risk management in the concept phase of technology development to maximize the likelihood of success, cost effective micro and nano technology to increase the capability of emerging deployed systems and long-term growth and profits.

The interface between forensic science and technology: how technology could cause a paradigm shift in the role of forensic institutes in the criminal justice system.

PubMed

Kloosterman, Ate; Mapes, Anna; Geradts, Zeno; van Eijk, Erwin; Koper, Carola; van den Berg, Jorrit; Verheij, Saskia; van der Steen, Marcel; van Asten, Arian

2015-08-05

In this paper, the importance of modern technology in forensic investigations is discussed. Recent technological developments are creating new possibilities to perform robust scientific measurements and studies outside the controlled laboratory environment. The benefits of real-time, on-site forensic investigations are manifold and such technology has the potential to strongly increase the speed and efficacy of the criminal justice system. However, such benefits are only realized when quality can be guaranteed at all times and findings can be used as forensic evidence in court. At the Netherlands Forensic Institute, innovation efforts are currently undertaken to develop integrated forensic platform solutions that allow for the forensic investigation of human biological traces, the chemical identification of illicit drugs and the study of large amounts of digital evidence. These platforms enable field investigations, yield robust and validated evidence and allow for forensic intelligence and targeted use of expert capacity at the forensic institutes. This technological revolution in forensic science could ultimately lead to a paradigm shift in which a new role of the forensic expert emerges as developer and custodian of integrated forensic platforms. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Tuberous sclerosis complex: Recent advances in manifestations and therapy.

PubMed

Wataya-Kaneda, Mari; Uemura, Motohide; Fujita, Kazutoshi; Hirata, Haruhiko; Osuga, Keigo; Kagitani-Shimono, Kuriko; Nonomura, Norio

2017-09-01

Tuberous sclerosis complex is an autosomal dominant inherited disorder characterized by generalized involvement and variable manifestations with a birth incidence of 1:6000. In a quarter of a century, significant progress in tuberous sclerosis complex has been made. Two responsible genes, TSC1 and TSC2, which encode hamartin and tuberin, respectively, were discovered in the 1990s, and their functions were elucidated in the 2000s. Hamartin-Tuberin complex is involved in the phosphoinositide 3-kinase-protein kinase B-mammalian target of rapamycin signal transduction pathway, and suppresses mammalian target of rapamycin complex 1 activity, which is a center for various functions. Constitutive activation of mammalian target of rapamycin complex 1 causes variable manifestations in tuberous sclerosis complex. Recently, genetic tests were launched to diagnose tuberous sclerosis complex, and mammalian target of rapamycin complex 1 inhibitors are being used to treat tuberous sclerosis complex patients. As a result of these advances, new diagnostic criteria have been established and an indispensable new treatment method; that is, "a cross-sectional medical examination system," a system to involve many experts for tuberous sclerosis complex diagnosis and treatments, was also created. Simultaneously, the frequency of genetic tests and advances in diagnostic technology have resulted in new views on symptoms. The numbers of tuberous sclerosis complex patients without neural symptoms are increasing, and for these patients, renal manifestations and pulmonary lymphangioleiomyomatosis have become important manifestations. New concepts of tuberous sclerosis complex-associated neuropsychiatric disorders or perivascular epithelioid cell tumors are being created. The present review contains a summary of recent advances, significant manifestations and therapy in tuberous sclerosis complex. © 2017 The Japanese Urological Association.

System Concept for Remote Measurement of Asteroid Molecular Composition

NASA Astrophysics Data System (ADS)

Hughes, G. B.; Lubin, P. M.; Zhang, Q.; Brashears, T.; Cohen, A. N.; Madajian, J.

2016-12-01

We propose a method for probing the molecular composition of cold solar system targets (asteroids, comets, planets, moons) from a distant vantage, such as from a spacecraft orbiting the object. A directed energy beam is focused on the target. With sufficient flux, the spot temperature rises rapidly, and evaporation of surface materials occurs. The melted spot creates a high-temperature blackbody source, and ejected material creates a plume of surface materials in front of the spot. Molecular and atomic absorption of the blackbody radiation occurs within the ejected plume. Bulk composition of the surface material is investigated by using a spectrometer to view the heated spot through the ejected material. Our proposed method differs from technologies such as Laser-Induced Breakdown Spectroscopy (LIBS), which atomizes and ionizes materials in the target; scattered ions emit characteristic radiation, and the LIBS detector performs atomic composition analysis by observing emission spectra. Standoff distance for LIBS is limited by the strength of characteristic emission, and distances greater than 10 m are problematic. Our proposed method detects atomic and molecular absorption spectra in the plume; standoff distance is limited by the size of heated spot, and the plume opacity; distances on the order of tens of kilometers are immediately feasible. Simulations have been developed for laser heating of a rocky target, with concomitant evaporation. Evaporation rates lead to determination of plume density and opacity. Absorption profiles for selected materials are estimated from plume properties. Initial simulations of absorption profiles with laser heating show great promise for molecular composition analysis from tens of kilometers distance. This paper explores the feasibility a hypothetical mission that seeks to perform surface molecular composition analysis of a near-earth asteroid while the craft orbits the asteroid. Such a system has compelling potential benefit for solar system exploration.

Basics of genome editing technology and its application in livestock species.

PubMed

Petersen, Bjoern

2017-08-01

In the last decade, the research community has witnessed a blooming of targeted genome editing tools and applications. Novel programmable DNA nucleases such as zinc finger nucleases (ZFNs), transcription activator-like endonucleases (TALENs) and the clustered regularly interspaced short palindromic repeats/Cas9 system (CRISPR/Cas9) possess long recognition sites and are capable of cutting DNA in a very specific manner. These DNA nucleases mediate targeted genetic alterations by enhancing the DNA mutation rate via induction of double-strand breaks at a predetermined genomic site. Compared to conventional homologous recombination-based gene targeting, DNA nucleases, also referred to as Genome Editors (GEs), can increase the targeting rate around 10,000- to 100,000-fold. The successful application of different GEs has been shown in a myriad of different organisms, including insects, amphibians, plants, nematodes and several mammalian species, including human cells and embryos. In contrast to all other DNA nucleases, that rely on protein-DNA binding, CRISPR/Cas9 uses RNA to establish a specific binding of its DNA nuclease. Besides its capability to facilitate multiplexed genomic modifications in one shot, the CRISPR/Cas is much easier to design compared to all other DNA nucleases. Current results indicate that any DNA nuclease can be successfully employed in a broad range of organisms which renders them useful for improving the understanding of complex physiological systems such as reproduction, producing transgenic animals, including creating large animal models for human diseases, creating specific cell lines, and plants, and even for treating human genetic diseases. This review provides an update on DNA nucleases, their underlying mechanism and focuses on their application to edit the genome of livestock species. © 2017 Blackwell Verlag GmbH.

Using Internet Technologies To Enhance Training.

ERIC Educational Resources Information Center

Pollock, Carl; Masters, Robert

1997-01-01

Describes how to use Internet technologies to create an intranet, or an online training database system, for improving company communications, effectiveness, and job performance. Topics include technology and performance; educating managers and key decision makers; creating a graphic model of the training system; and fitting into the existing…

Creating Standards-Based Technology Education Facilities

ERIC Educational Resources Information Center

Daugherty, Michael K.; Klenke, Andrew M.; Neden, Michael

2008-01-01

One of the most intimidating tasks faced by new or practicing technology education teachers is the challenge of creating new facilities or renovating current facilities for a new purpose. While the fourth program standard in "Advancing Excellence in Technological Literacy: Student Assessment, Professional Development, and Program Standards (AETL)"…

An Evaluation of a Flight Deck Interval Management Algorithm Including Delayed Target Trajectories

NASA Technical Reports Server (NTRS)

Swieringa, Kurt A.; Underwood, Matthew C.; Barmore, Bryan; Leonard, Robert D.

2014-01-01

NASA's first Air Traffic Management (ATM) Technology Demonstration (ATD-1) was created to facilitate the transition of mature air traffic management technologies from the laboratory to operational use. The technologies selected for demonstration are the Traffic Management Advisor with Terminal Metering (TMA-TM), which provides precise timebased scheduling in the terminal airspace; Controller Managed Spacing (CMS), which provides controllers with decision support tools enabling precise schedule conformance; and Interval Management (IM), which consists of flight deck automation that enables aircraft to achieve or maintain precise in-trail spacing. During high demand operations, TMA-TM may produce a schedule and corresponding aircraft trajectories that include delay to ensure that a particular aircraft will be properly spaced from other aircraft at each schedule waypoint. These delayed trajectories are not communicated to the automation onboard the aircraft, forcing the IM aircraft to use the published speeds to estimate the target aircraft's estimated time of arrival. As a result, the aircraft performing IM operations may follow an aircraft whose TMA-TM generated trajectories have substantial speed deviations from the speeds expected by the spacing algorithm. Previous spacing algorithms were not designed to handle this magnitude of uncertainty. A simulation was conducted to examine a modified spacing algorithm with the ability to follow aircraft flying delayed trajectories. The simulation investigated the use of the new spacing algorithm with various delayed speed profiles and wind conditions, as well as several other variables designed to simulate real-life variability. The results and conclusions of this study indicate that the new spacing algorithm generally exhibits good performance; however, some types of target aircraft speed profiles can cause the spacing algorithm to command less than optimal speed control behavior.

Advanced Spacesuit Portable Life Support System Packaging Concept Mock-Up Design & Development

NASA Technical Reports Server (NTRS)

O''Connell, Mary K.; Slade, Howard G.; Stinson, Richard G.

1998-01-01

A concentrated development effort was begun at NASA Johnson Space Center to create an advanced Portable Life Support System (PLSS) packaging concept. Ease of maintenance, technological flexibility, low weight, and minimal volume are targeted in the design of future micro-gravity and planetary PLSS configurations. Three main design concepts emerged from conceptual design techniques and were carried forth into detailed design, then full scale mock-up creation. "Foam", "Motherboard", and "LEGOtm" packaging design concepts are described in detail. Results of the evaluation process targeted maintenance, robustness, mass properties, and flexibility as key aspects to a new PLSS packaging configuration. The various design tools used to evolve concepts into high fidelity mock ups revealed that no single tool was all encompassing, several combinations were complimentary, the devil is in the details, and, despite efforts, many lessons were learned only after working with hardware.

Design of multivalent complexes using the barnase*barstar module.

PubMed

Deyev, Sergey M; Waibel, Robert; Lebedenko, Ekaterina N; Schubiger, August P; Plückthun, Andreas

2003-12-01

The ribonuclease barnase (12 kDa) and its inhibitor barstar (10 kDa) form a very tight complex in which all N and C termini are accessible for fusion. Here we exploit this system to create modular targeting molecules based on antibody scFv fragment fusions to barnase, to two barnase molecules in series and to barstar. We describe the construction, production and purification of defined dimeric and trimeric complexes. Immobilized barnase fusions are used to capture barstar fusions from crude extracts to yield homogeneous, heterodimeric fusion proteins. These proteins are stable, soluble and resistant to proteolysis. Using fusions with anti-p185(HER2-ECD) 4D5 scFv, we show that the anticipated gain in avidity from monomer to dimer to trimer is obtained and that favorable tumor targeting properties are achieved. Many permutations of engineered multispecific fusion proteins become accessible with this technology of quasi-covalent heterodimers.

A review on current status of antiviral siRNA.

PubMed

Qureshi, Abid; Tantray, Vaqar Gani; Kirmani, Altaf Rehman; Ahangar, Abdul Ghani

2018-04-15

Viral diseases like influenza, AIDS, hepatitis, and Ebola cause severe epidemics worldwide. Along with their resistant strains, new pathogenic viruses continue to be discovered so creating an ongoing need for new antiviral treatments. RNA interference is a cellular gene-silencing phenomenon in which sequence-specific degradation of target mRNA is achieved by means of complementary short interfering RNA (siRNA) molecules. Short interfering RNA technology affords a potential tractable strategy to combat viral pathogenesis because siRNAs are specific, easy to design, and can be directed against multiple strains of a virus by targeting their conserved gene regions. In this review, we briefly summarize the current status of siRNA therapy for representative examples from different virus families. In addition, other aspects like their design, delivery, medical significance, bioinformatics resources, and limitations are also discussed. Copyright © 2018 John Wiley & Sons, Ltd.

In Vivo Cancer Biomarkers of Esophageal Neoplasia

PubMed Central

Lu, Shaoying; Wang, Thomas D

2011-01-01

Summary The emergence of in vivo cancer biomarkers is promising tool for early detection, risk stratification, and therapeutic intervention in the esophagus, where adenocarcinoma is increasing at a rate that is faster than any other in industrialized nations. Exciting advances in target identification, probe development, and optical instrumentation are creating tremendous new opportunities for advancing techniques of molecular imaging. Progress in these areas is being made with small animal models of esophageal cancer using surgical approaches to induce reflux of acid and bile, and these findings are beginning to be evaluated in the clinic. Further identification of relevant targets, characterization of specific probes, and development of endoscopic imaging technologies are needed to further this direction in the field of molecular medicine. In the future, new methods that use in vivo cancer biomarkers for the early detection of neoplastic changes in the setting of Barrett's esophagus will become available. PMID:19126962

Online Experiential Education for Technological Entrepreneurs

ERIC Educational Resources Information Center

Ermolovich, Thomas R.

2011-01-01

Technological Entrepreneurship is both an art and a science. As such, the education of a technological entrepreneur requires both an academic and an experiential component. One form of experiential education is creating real new ventures with student teams. When these ventures are created in an online modality, students work in virtual teams and…

Podcasting as Transformative Work

ERIC Educational Resources Information Center

Vasquez, Vivian Maria

2015-01-01

Although technology is most often heralded an intrinsic efficiency, the process of using technology to create a text is full of opportunities to learn new information, create and distribute knowledge, and engage in identity work. This article explores how the production of 1 such technological text, a podcast, offered students opportunities to…

Dropwise additive manufacturing of pharmaceutical products for solvent-based dosage forms.

PubMed

Hirshfield, Laura; Giridhar, Arun; Taylor, Lynne S; Harris, Michael T; Reklaitis, Gintaras V

2014-02-01

In recent years, the US Food and Drug Administration has encouraged pharmaceutical companies to develop more innovative and efficient manufacturing methods with improved online monitoring and control. Mini-manufacturing of medicine is one such method enabling the creation of individualized product forms for each patient. This work presents dropwise additive manufacturing of pharmaceutical products (DAMPP), an automated, controlled mini-manufacturing method that deposits active pharmaceutical ingredients (APIs) directly onto edible substrates using drop-on-demand (DoD) inkjet printing technology. The use of DoD technology allows for precise control over the material properties, drug solid state form, drop size, and drop dynamics and can be beneficial in the creation of high-potency drug forms, combination drugs with multiple APIs or individualized medicine products tailored to a specific patient. In this work, DAMPP was used to create dosage forms from solvent-based formulations consisting of API, polymer, and solvent carrier. The forms were then analyzed to determine the reproducibility of creating an on-target dosage form, the morphology of the API of the final form and the dissolution behavior of the drug over time. DAMPP is found to be a viable alternative to traditional mass-manufacturing methods for solvent-based oral dosage forms. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Generation and genetic modification of induced pluripotent stem cells.

PubMed

Schambach, Axel; Cantz, Tobias; Baum, Christopher; Cathomen, Toni

2010-07-01

The generation of induced pluripotent stem cells (iPSCs) enabled by exogenous expression of the canonical Oct4, Sox2, Klf4 and c-Myc reprogramming factors has opened new ways to create patient- or disease-specific pluripotent cells. iPSCs represent an almost inexhaustible source of cells for targeted differentiation into somatic effector cells and hence are likely to be invaluable for therapeutic applications and disease-related research. After an introduction on the biology of reprogramming we cover emerging technological advances, including new reprogramming approaches, small-molecule compounds and tailored genetic modification, and give an outlook towards potential clinical applications of iPSCs. Although this field is progressing rapidly, reprogramming is still an inefficient process. The reader will learn about innovative tools to generate patient-specific iPSCs and how to modify these established lines in a safe way. Ideally, the disease-causing mutation is edited directly in the genome using novel technologies based on artificial nucleases, such as zinc-finger nucleases. Human iPSCs create fascinating options with regard to disease modeling, drug testing, developmental studies and therapeutic applications. However, important hurdles have to be taken and more efficient protocols to be established to achieve the ambitious goal of bringing iPSCs into clinical use.

A novel approach for monitoring genetically engineered microorganisms by using artificial, stable RNAs

NASA Technical Reports Server (NTRS)

Pitulle, C.; Hedenstierna, K. O.; Fox, G. E.

1995-01-01

Further improvements in technology for efficient monitoring of genetically engineered microorganisms (GEMs) in the environment are needed. Technology for monitoring rRNA is well established but has not generally been applicable to GEMs because of the lack of unique rRNA target sequences. In the work described herein, it is demonstrated that a deletion mutant of a plasmid-borne Vibrio proteolyticus 5S rRNA gene continues to accumulate to high levels in Escherichia coli although it is no longer incorporated into 70S ribosomes. This deletion construct was subsequently modified by mutagenesis to create a unique recognition site for the restriction endonuclease BstEII, into which new sequences could be readily inserted. Finally, a novel 17-nucleotide identifier sequence from Pennisetum purpureum was embedded into the construct to create an RNA identification cassette. The artificial identifier RNA, expressed from this cassette in vivo, accumulated in E. coli to levels comparable to those of wild-type 5S rRNA without being seriously detrimental to cell survival in laboratory experiments and without entering the ribosomes. These results demonstrate that artificial, stable RNAs containing sequence segments remarkably different from those present in any known rRNA can be designed and that neither the deleted sequence segment nor ribosome incorporation is essential for accumulation of an RNA product.

Ablation of atrial fibrillation with concomitant cardiac surgery.

PubMed

Gillinov, A Marc; Saltman, Adam E

2007-01-01

Atrial fibrillation is present in approximately 35% of patients presenting for mitral valve surgery and in 1 to 6% of adult patients undergoing other forms of cardiac surgery. If left untreated, atrial fibrillation is associated with increased morbidity, and, in some subgroups, increased mortality. Therefore, concomitant management of the arrhythmia is indicated in most cardiac surgery patients with preexisting atrial fibrillation. Although the cut-and-sew Cox-maze III procedure is extremely effective, it has been supplanted by newer operations that rely on alternate energy sources to create lines of conduction block. Early and mid-term results are good with a variety of technologies. Choice of lesion set remains a matter of debate, but results of ablation appear to be enhanced by a biatrial lesion set. Targeted areas for improvement in concomitant ablation include acceptance of uniform standards for reporting results, development of improved technology for ablation and intraoperative assessment, and creation of instrumentation that facilitates minimally invasive approaches.

Technical Progress of the New Worlds Observer Mission

NASA Astrophysics Data System (ADS)

Lo, Amy; Noecker, C.; Cash, W.; NWO Study Team

2009-01-01

We report on the technical progress of the New Worlds Observer (NWO) mission concept. NWO is a two spacecraft mission that is capable of detecting and characterizing extra-solar, terrestrial planets and planetary systems. NWO consists of an external starshade and an UV-optical space telescope, flying in tandem. The starshade is a petal-shaped, opaque screen that creates an extremely dark shadow large enough to shade the telescope aperture from the target star. The NWO team has been addressing the top technology challenges of the concept, and report here our progress. We will present the current mission configuration best suited to address Terrestrial Planet Finding requirements, and highlight the technological breakthroughs that we have achieved this year. In particular, we will report on progress made in precision deployables for the large starshade, and the trajectory & alignment control system for NWO. We will also briefly highlight advances in understanding the starshade optical performance.

First Universities Allied for Essential Medicines (UAEM) Neglected Diseases and Innovation Symposium.

PubMed

Musselwhite, Laura W; Maciag, Karolina; Lankowski, Alex; Gretes, Michael C; Wellems, Thomas E; Tavera, Gloria; Goulding, Rebecca E; Guillen, Ethan

2012-01-01

Universities Allied for Essential Medicines organized its first Neglected Diseases and Innovation Symposium to address expanding roles of public sector research institutions in innovation in research and development of biomedical technologies for treatment of diseases, particularly neglected tropical diseases. Universities and other public research institutions are increasingly integrated into the pharmaceutical innovation system. Academic entities now routinely undertake robust high-throughput screening and medicinal chemistry research programs to identify lead compounds for small molecule drugs and novel drug targets. Furthermore, product development partnerships are emerging between academic institutions, non-profit entities, and biotechnology and pharmaceutical companies to create diagnostics, therapies, and vaccines for diseases of the poor. With not for profit mission statements, open access publishing standards, open source platforms for data sharing and collaboration, and a shift in focus to more translational research, universities and other public research institutions are well-placed to accelerate development of medical technologies, particularly for neglected tropical diseases.

Macroscale delivery systems for molecular and cellular payloads

NASA Astrophysics Data System (ADS)

Kearney, Cathal J.; Mooney, David J.

2013-11-01

Macroscale drug delivery (MDD) devices are engineered to exert spatiotemporal control over the presentation of a wide range of bioactive agents, including small molecules, proteins and cells. In contrast to systemically delivered drugs, MDD systems act as a depot of drug localized to the treatment site, which can increase drug effectiveness while reducing side effects and confer protection to labile drugs. In this Review, we highlight the key advantages of MDD systems, describe their mechanisms of spatiotemporal control and provide guidelines for the selection of carrier materials. We also discuss the combination of MDD technologies with classic medical devices to create multifunctional MDD devices that improve integration with host tissue, and the use of MDD technology in tissue-engineering strategies to direct cell behaviour. As our ever-expanding knowledge of human biology and disease provides new therapeutic targets that require precise control over their application, the importance of MDD devices in medicine is expected to increase.

Three-dimensional surface imaging system for assessing human obesity

NASA Astrophysics Data System (ADS)

Xu, Bugao; Yu, Wurong; Yao, Ming; Pepper, M. Reese; Freeland-Graves, Jeanne H.

2009-10-01

The increasing prevalence of obesity suggests a need to develop a convenient, reliable, and economical tool for assessment of this condition. Three-dimensional (3-D) body surface imaging has emerged as an exciting technology for the estimation of body composition. We present a new 3-D body imaging system, which is designed for enhanced portability, affordability, and functionality. In this system, stereo vision technology is used to satisfy the requirement for a simple hardware setup and fast image acquisition. The portability of the system is created via a two-stand configuration, and the accuracy of body volume measurements is improved by customizing stereo matching and surface reconstruction algorithms that target specific problems in 3-D body imaging. Body measurement functions dedicated to body composition assessment also are developed. The overall performance of the system is evaluated in human subjects by comparison to other conventional anthropometric methods, as well as air displacement plethysmography, for body fat assessment.

A 3D surface imaging system for assessing human obesity

NASA Astrophysics Data System (ADS)

Xu, B.; Yu, W.; Yao, M.; Yao, X.; Li, Q.; Pepper, M. R.; Freeland-Graves, J. H.

2009-08-01

The increasing prevalence of obesity suggests a need to develop a convenient, reliable and economical tool for assessment of this condition. Three-dimensional (3D) body surface imaging has emerged as an exciting technology for estimation of body composition. This paper presents a new 3D body imaging system, which was designed for enhanced portability, affordability, and functionality. In this system, stereo vision technology was used to satisfy the requirements for a simple hardware setup and fast image acquisitions. The portability of the system was created via a two-stand configuration, and the accuracy of body volume measurements was improved by customizing stereo matching and surface reconstruction algorithms that target specific problems in 3D body imaging. Body measurement functions dedicated to body composition assessment also were developed. The overall performance of the system was evaluated in human subjects by comparison to other conventional anthropometric methods, as well as air displacement plethysmography, for body fat assessment.

The social nature of chronic noncommunicable diseases and how to tackle them through communication technology, training, and outreach.

PubMed

Martin-Moreno, Jose M; Apfel, Franklin; Sanchez, Jose Luis Alfonso; Galea, Gauden; Jakab, Zsuzsanna

2011-08-01

As world leaders prepare for the United Nations High Level Meeting on Noncommunicable Diseases, to take place in September 2011, international organizations, nongovernmental organizations, and economic and business fora have created new alliances and initiatives to accelerate research, advocacy, and political commitment. This article argues that the time is propitious to reflect on the social nature of the most common behavioral noncommunicable disease determinants, including tobacco and alcohol use, physical inactivity, and unhealthy diet. Evidence is presented related to the fact that these diseases are profoundly rooted in social and community ties and points to the need for a modern communication strategy to serve as a linchpin of any successful action to address these public health threats. Several proposals, aimed at promoting health literacy, strengthening health workforce skills, capturing the power of new media and technologies, and targeting vulnerable groups, are discussed.

Satisfying STEM Education Using the Arduino Microprocessor in C Programming

NASA Astrophysics Data System (ADS)

Hoffer, Brandyn M.

There exists a need to promote better Science Technology Engineering and Math (STEM) education at the high school level. To satisfy this need a series of hands-on laboratory assignments were created to be accompanied by 2 educational trainers that contain various electronic components. This project provides an interdisciplinary, hands-on approach to teaching C programming that meets several standards defined by the Tennessee Board of Education. Together the trainers and lab assignments also introduce key concepts in math and science while allowing students hands-on experience with various electronic components. This will allow students to mimic real world applications of using the C programming language while exposing them to technology not currently introduced in many high school classrooms. The developed project is targeted at high school students performing at or above the junior level and uses the Arduino Mega open-source Microprocessor and software as the primary control unit.

Shielded Heavy-Ion Environment Linear Detector (SHIELD): an experiment for the Radiation and Technology Demonstration (RTD) Mission.

PubMed

Shavers, M R; Cucinotta, F A; Miller, J; Zeitlin, C; Heilbronn, L; Wilson, J W; Singleterry, R C

2001-01-01

Radiological assessment of the many cosmic ion species of widely distributed energies requires the use of theoretical transport models to accurately describe diverse physical processes related to nuclear reactions in spacecraft structures, planetary atmospheres and surfaces, and tissues. Heavy-ion transport models that were designed to characterize shielded radiation fields have been validated through comparison with data from thick-target irradiation experiments at particle accelerators. With the RTD Mission comes a unique opportunity to validate existing radiation transport models and guide the development of tools for shield design. For the first time, transport properties will be measured in free-space to characterize the shielding effectiveness of materials that are likely to be aboard interplanetary space missions. Target materials composed of aluminum, advanced composite spacecraft structure and other shielding materials, helium (a propellant) and tissue equivalent matrices will be evaluated. Large solid state detectors will provide kinetic energy and charge identification for incident heavy-ions and for secondary ions created in the target material. Transport calculations using the HZETRN model suggest that 8 g cm -2 thick targets would be adequate to evaluate the shielding effectiveness during solar minimum activity conditions for a period of 30 days or more.

Cell-permeable nanobodies for targeted immunolabelling and antigen manipulation in living cells

NASA Astrophysics Data System (ADS)

Herce, Henry D.; Schumacher, Dominik; Schneider, Anselm F. L.; Ludwig, Anne K.; Mann, Florian A.; Fillies, Marion; Kasper, Marc-André; Reinke, Stefan; Krause, Eberhard; Leonhardt, Heinrich; Cardoso, M. Cristina; Hackenberger, Christian P. R.

2017-08-01

Functional antibody delivery in living cells would enable the labelling and manipulation of intracellular antigens, which constitutes a long-thought goal in cell biology and medicine. Here we present a modular strategy to create functional cell-permeable nanobodies capable of targeted labelling and manipulation of intracellular antigens in living cells. The cell-permeable nanobodies are formed by the site-specific attachment of intracellularly stable (or cleavable) cyclic arginine-rich cell-penetrating peptides to camelid-derived single-chain VHH antibody fragments. We used this strategy for the non-endocytic delivery of two recombinant nanobodies into living cells, which enabled the relocalization of the polymerase clamp PCNA (proliferating cell nuclear antigen) and tumour suppressor p53 to the nucleolus, and thereby allowed the detection of protein-protein interactions that involve these two proteins in living cells. Furthermore, cell-permeable nanobodies permitted the co-transport of therapeutically relevant proteins, such as Mecp2, into the cells. This technology constitutes a major step in the labelling, delivery and targeted manipulation of intracellular antigens. Ultimately, this approach opens the door towards immunostaining in living cells and the expansion of immunotherapies to intracellular antigen targets.

Adaptive User Profiles in Pervasive Advertising Environments

NASA Astrophysics Data System (ADS)

Alt, Florian; Balz, Moritz; Kristes, Stefanie; Shirazi, Alireza Sahami; Mennenöh, Julian; Schmidt, Albrecht; Schröder, Hendrik; Goedicke, Michael

Nowadays modern advertising environments try to provide more efficient ads by targeting costumers based on their interests. Various approaches exist today as to how information about the users' interests can be gathered. Users can deliberately and explicitly provide this information or user's shopping behaviors can be analyzed implicitly. We implemented an advertising platform to simulate an advertising environment and present adaptive profiles, which let users setup profiles based on a self-assessment, and enhance those profiles with information about their real shopping behavior as well as about their activity intensity. Additionally, we explain how pervasive technologies such as Bluetooth can be used to create a profile anonymously and unobtrusively.

Research & Development Roadmap for Next-Generation Appliances

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goetzler, William; Sutherland, Timothy; Foley, Kevin

2012-03-01

Appliances present an attractive opportunity for near-term energy savings in existing building, because they are less expensive and replaced more regularly than heating, ventilation, and air-conditioning (HVAC) systems or building envelope components. This roadmap targets high-priority research and development (R&D), demonstration and commercialization activities that could significantly reduce residential appliance energy consumption. The main objective of the roadmap is to seek activities that accelerate the commercialization of high-efficiency appliance technologies while maintaining the competitiveness of American industry. The roadmap identified and evaluated potential technical innovations, defined research needs, created preliminary research and development roadmaps, and obtained stakeholder feedback on themore » proposed initiatives.« less

Acquisition Modernization: Transitioning Technology Into Warfighter Capability

DTIC Science & Technology

2011-08-01

to test and evaluate the technology and integrate the new capability into operational weapon systems (Figure 4). This funding model creates stove...misalignment between missions, TRLs, and the RDT&E funding model is a major 11 contributor to the valley of death. Technologies become obsolete on... funding model of the acquisition system. Create an individual budget account to fund the development of promising technologies. The Acquisition

Propagation in compressed matter of hot electrons created by short intense lasers

NASA Astrophysics Data System (ADS)

Batani, D.; Bernardinello, A.; Masella, V.; Pisani, F.; Koenig, M.; Krishnan, J.; Benuzzi, A.; Ellwi, S.; Hall, T.; Norreys, P.; Djaoui, A.; Neely, D.; Rose, S.; Fews, P.; Key, M.

1998-02-01

We performed the first experimental study of propagation in compressed matter of hot electrons created by a short pulse intense laser. The experiment has been carried out with the VULCAN laser at Rutherford compressing plastic targets with two ns laser beams at an intensity ⩾1014W/cm2. A CPA beam with an intensity ⩾1016W/cm2 irradiated the rear side of the target and created hot electrons propagating through the compressed matter. K-α emission was used as diagnostics of hot electron penetration by putting a chloride plastic layer inside the target.

New Era of Scientific Ocean Drilling

NASA Astrophysics Data System (ADS)

Eguchi, N.; Toczko, S.; Sanada, Y.; Igarashi, C.; Kubo, Y.; Maeda, L.; Sawada, I.; Takase, K.; Kyo, N.

2014-12-01

The D/V Chikyu, committed to scientific ocean drilling since 2007, has completed thirteen IODP expeditions, and Chikyu's enhanced drilling technology gives us the means to reach deep targets, enhanced well logging, deep water riserless drilling, and state of the art laboratory. Chikyu recovered core samples from 2466 meters below sea floor (mbsf) in IODP Exp. 337, and drilled to 3058.5 mbsf in IODP Exp. 348, but these are still not the limit of Chikyu's capability. As deep as these depths are, they are just halfway to the 5200 mbsf plate boundary target for the NanTroSEIZE deep riser borehole. There are several active IODP proposals in the pipeline. Each has scientific targets requiring several thousand meters of penetration below the sea floor. Riser technology is the only way to collect samples and data from that depth. Well logging has been enhanced with the adoption of riser drilling, especially for logging-while-drilling (LWD). LWD has several advantages over wireline logging, and provides more opportunities for continuous measurements even in unstable boreholes. Because of the larger diameter of riser pipes and enhanced borehole stability, Chikyu can use several state-of-the-art downhole tools, e.g. fracture tester, fluid sampling tool, wider borehole imaging, and the latest sonic tools. These new technologies and tools can potentially expand the envelope of scientific ocean drilling. Chikyu gives us access to ultra-deep water riserless drilling. IODP Exp. 343/343T investigating the March 2011 Tohoku Oki Earthquake, explored the toe of the landward slope of the Japan Trench. This expedition reached the plate boundary fault target at more than 800 mbsf in water depths over 6900 m for logging-while-drilling, coring, and observatory installation. This deep-water drilling capability also expands the scientific ocean drilling envelope and provides access to previously unreachable targets. On top of these operational capabilities, Chikyu's onboard laboratory is equipped with state-of-the-art instruments to analyze all science samples. X-ray CT creates non-destructive 3D images of core samples providing high resolution structural detail. The microbiology laboratory offers clean and contamination-free work environments required for microbiological samples.

National Security Technology Incubation Strategic Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

This strategic plan contains information on the vision, mission, business and technology environment, goals, objectives, and incubation process of the National Security Technology Incubation Program (NSTI) at Arrowhead Center. The development of the NSTI is a key goal of the National Security Preparedness Project (NSPP). Objectives to achieve this goal include developing incubator plans (strategic, business, action, and operations), creating an incubator environment, creating a support and mentor network for companies in the incubator program, attracting security technology businesses to the region, encouraging existing business to expand, initiating business start-ups, evaluating products and processes of the incubator program, and achievingmore » sustainability of the incubator program. With the events of 9/11, the global community faces ever increasing and emerging threats from hostile groups determined to rule by terror. According to the National Nuclear Security Administration (NNSA) Strategic Plan, the United States must be able to quickly respond and adapt to unanticipated situations as they relate to protection of our homeland and national security. Technology plays a key role in a strong national security position, and the private business community, along with the national laboratories, academia, defense and homeland security organizations, provide this technology. Fostering innovative ideas, translated into relevant technologies answering the needs of NNSA, is the purpose of the NSTI. Arrowhead Center of New Mexico State University is the operator and manager of the NSTI. To develop the NSTI, Arrowhead Center must meet the planning, development, execution, evaluation, and sustainability activities for the program and identify and incubate new technologies to assist the NNSA in meeting its mission and goals. Technology alone does not give a competitive advantage to the country, but the creativity and speed with which it is employed does. For a company to succeed, it must have sustainable competitive advantages in seven key areas: geography, products and businesses, distribution, sales and service culture, efficiency, brand, and most important, people. The four strategic goals of the plan are to: 1. Identify and recruit small businesses with technology applications for national security. 2. Design and implement a national security incubator program that provides incubator services and physical space for the targeted businesses. 3. Provide business assistance and technical leadership to NSTI clients to assist in bringing their products to market. 4. Construct a new multi-tenant facility with dedicated physical space for businesses with technology applications for national security.« less

An Examination of Faculty Innovativeness in Relation to Inductive Teaching and the Use of Technology

ERIC Educational Resources Information Center

Forrer, Donald A.; Wyant, Nancey A.; Gordin, Patricia C.

2014-01-01

The conceptual framework for this research describes the processes faculty use to create an online course that meets learning outcomes while creating a positive learning experience for the online student. This involves acceptance of technology to create a course structured for inductive learning in addition to traditional deductive learning. The…

Creating Games as Authentic Learning in the Information Technology Classroom

ERIC Educational Resources Information Center

Frydenberg, Mark

2015-01-01

Teaching students to create computer games has become a common practice in both K-12 and tertiary education to introducing programming concepts, increasing student engagement, and recruiting majors and minors in technology fields. This study describes a project where first-year college students in an introductory technology concepts course use a…

The Tools of Teacher Education: Preservice Teachers' Use of Technology To Create Instructional Materials.

ERIC Educational Resources Information Center

Roberts, Sherron Killingsworth; Hsu, Ying-Shao

2000-01-01

Examines the effectiveness/efficiency of preservice teachers' use of technology to create instructional materials developed in an undergraduate reading/language arts course. Results showed no significant difference between measures of overall quality of the technology assistance as compared to handmade prompts. Eighty-five percent of the teachers…

Comic Relief: Graduate Students Address Multiple Meanings for Technology Integration with Digital Comic Creation

ERIC Educational Resources Information Center

Sockman, Beth Rajan; Sutton, Rhonda; Herrmann, Michele

2016-01-01

This study determined the usefulness of digital comic creation with 77 graduate students in a teacher technology course. Students completed an assigned reading and created digital comics that addressed technology integration concerns in the schools and society. Using practical action research, 77 student-created comics were analyzed. The findings…

Public funding of pharmaceuticals in The Netherlands: investigating the effect of evidence, process and context on CVZ decision-making.

PubMed

Cerri, Karin H; Knapp, Martin; Fernandez, Jose-Luis

2014-09-01

The College Voor Zorgverzekeringen (CVZ) provides guidance to the Dutch healthcare system on funding and use of new pharmaceutical technologies. This study examined the impact of evidence, process and context factors on CVZ decisions in 2004-2009. A data set of CVZ decisions pertaining to pharmaceutical technologies was created, including 29 variables extracted from published information. A three-category outcome variable was used, defined as the decision to 'recommend', 'restrict' or 'not recommend' a technology. Technologies included in list 1A/1B or on the expensive drug list were considered recommended; those included in list 2 or for which patient co-payment is required were considered restricted; technologies not included on any reimbursement list were classified as 'not recommended'. Using multinomial logistic regression, the relative contribution of explanatory variables on CVZ decisions was assessed. In all, 244 technology appraisals (256 technologies) were analysed, with 51%, of technologies recommended, 33% restricted and 16% not recommended by CVZ for funding. The multinomial model showed significant associations (p ≤ 0.10) between CVZ outcome and several variables, including: (1) use of an active comparator and demonstration of statistical superiority of the primary endpoint in clinical trials, (2) pharmaceutical budget impact associated with introduction of the technology, (3) therapeutic indication and (4) prevalence of the target population. Results confirm the value of a comprehensive and multivariate approach to understanding CVZ decision-making.

PTBS segmentation scheme for synthetic aperture radar

NASA Astrophysics Data System (ADS)

Friedland, Noah S.; Rothwell, Brian J.

1995-07-01

The Image Understanding Group at Martin Marietta Technologies in Denver, Colorado has developed a model-based synthetic aperture radar (SAR) automatic target recognition (ATR) system using an integrated resource architecture (IRA). IRA, an adaptive Markov random field (MRF) environment, utilizes information from image, model, and neighborhood resources to create a discrete, 2D feature-based world description (FBWD). The IRA FBWD features are peak, target, background and shadow (PTBS). These features have been shown to be very useful for target discrimination. The FBWD is used to accrue evidence over a model hypothesis set. This paper presents the PTBS segmentation process utilizing two IRA resources. The image resource (IR) provides generic (the physics of image formation) and specific (the given image input) information. The neighborhood resource (NR) provides domain knowledge of localized FBWD site behaviors. A simulated annealing optimization algorithm is used to construct a `most likely' PTBS state. Results on simulated imagery illustrate the power of this technique to correctly segment PTBS features, even when vehicle signatures are immersed in heavy background clutter. These segmentations also suppress sidelobe effects and delineate shadows.

A 3D Computational fluid dynamics model validation for candidate molybdenum-99 target geometry

NASA Astrophysics Data System (ADS)

Zheng, Lin; Dale, Greg; Vorobieff, Peter

2014-11-01

Molybdenum-99 (99Mo) is the parent product of technetium-99m (99mTc), a radioisotope used in approximately 50,000 medical diagnostic tests per day in the U.S. The primary uses of this product include detection of heart disease, cancer, study of organ structure and function, and other applications. The US Department of Energy seeks new methods for generating 99Mo without the use of highly enriched uranium, to eliminate proliferation issues and provide a domestic supply of 99mTc for medical imaging. For this project, electron accelerating technology is used by sending an electron beam through a series of 100Mo targets. During this process a large amount of heat is created, which directly affects the operating temperature dictated by the tensile stress limit of the wall material. To maintain the required temperature range, helium gas is used as a cooling agent that flows through narrow channels between the target disks. In our numerical study, we investigate the cooling performance on a series of new geometry designs of the cooling channel. This research is supported by Los Alamos National Laboratory.

A Plane Target Detection Algorithm in Remote Sensing Images based on Deep Learning Network Technology

NASA Astrophysics Data System (ADS)

Shuxin, Li; Zhilong, Zhang; Biao, Li

2018-01-01

Plane is an important target category in remote sensing targets and it is of great value to detect the plane targets automatically. As remote imaging technology developing continuously, the resolution of the remote sensing image has been very high and we can get more detailed information for detecting the remote sensing targets automatically. Deep learning network technology is the most advanced technology in image target detection and recognition, which provided great performance improvement in the field of target detection and recognition in the everyday scenes. We combined the technology with the application in the remote sensing target detection and proposed an algorithm with end to end deep network, which can learn from the remote sensing images to detect the targets in the new images automatically and robustly. Our experiments shows that the algorithm can capture the feature information of the plane target and has better performance in target detection with the old methods.

Fabrication High Resolution Metrology Target By Step And Repeat Method

NASA Astrophysics Data System (ADS)

Dusa, Mircea

1983-10-01

Based on the photolithography process generally used to generate high resolution masks for semiconductor I.C.S, we found a very useful industrial application of laser technology.First, we have generated high resolution metrology targets which are used in industrial measurement laser interferometers as difra.ction gratings. Secondi we have generated these targets using step and repeat machine, with He-Ne laser interferometer controlled state, as a pattern generator, due to suitable computer programming.Actually, high resolution metrology target, means two chromium plates, one of which is called the" rule" the other one the "vernier". In Fig.1 we have the configuration of the rule and the vernier. The rule has a succesion of 3 μM lines generated as a difraction grating on a 4 x 4 inch chromium blank. The vernier has several exposed fields( areas) having 3 - 15 μm lines, fields placed on very precise position on the chromium blank surface. High degree of uniformity, tight CD tolerances, low defect density required by the targets, creates specialised problems during processing. Details of the processing, together with experimental results will be presented. Before we start to enter into process details, we have to point out that the dimensional requirements of the reticle target, are quite similar or perhaps more strict than LSI master casks. These requirements presented in Fig.2.

Genome-wide Target Enrichment-aided Chip Design: a 66 K SNP Chip for Cashmere Goat.

PubMed

Qiao, Xian; Su, Rui; Wang, Yang; Wang, Ruijun; Yang, Ting; Li, Xiaokai; Chen, Wei; He, Shiyang; Jiang, Yu; Xu, Qiwu; Wan, Wenting; Zhang, Yaolei; Zhang, Wenguang; Chen, Jiang; Liu, Bin; Liu, Xin; Fan, Yixing; Chen, Duoyuan; Jiang, Huaizhi; Fang, Dongming; Liu, Zhihong; Wang, Xiaowen; Zhang, Yanjun; Mao, Danqing; Wang, Zhiying; Di, Ran; Zhao, Qianjun; Zhong, Tao; Yang, Huanming; Wang, Jian; Wang, Wen; Dong, Yang; Chen, Xiaoli; Xu, Xun; Li, Jinquan

2017-08-17

Compared with the commercially available single nucleotide polymorphism (SNP) chip based on the Bead Chip technology, the solution hybrid selection (SHS)-based target enrichment SNP chip is not only design-flexible, but also cost-effective for genotype sequencing. In this study, we propose to design an animal SNP chip using the SHS-based target enrichment strategy for the first time. As an update to the international collaboration on goat research, a 66 K SNP chip for cashmere goat was created from the whole-genome sequencing data of 73 individuals. Verification of this 66 K SNP chip with the whole-genome sequencing data of 436 cashmere goats showed that the SNP call rates was between 95.3% and 99.8%. The average sequencing depth for target SNPs were 40X. The capture regions were shown to be 200 bp that flank target SNPs. This chip was further tested in a genome-wide association analysis of cashmere fineness (fiber diameter). Several top hit loci were found marginally associated with signaling pathways involved in hair growth. These results demonstrate that the 66 K SNP chip is a useful tool in the genomic analyses of cashmere goats. The successful chip design shows that the SHS-based target enrichment strategy could be applied to SNP chip design in other species.

Microelectronic electroporation array

NASA Astrophysics Data System (ADS)

Johnson, Lee J.; Shaffer, Kara J.; Skeath, Perry; Perkins, Frank K.; Pancrazio, Joseph; Scribner, Dean

2004-06-01

Gene Array technology has allowed for the study of gene binding by creating thousands of potential binding sites on a single device. A limitation of the current technology is that the effects of the gene and the gene-derived proteins cannot be studied in situ the same way, thousand site cell arrays are not readily available. We propose a new device structure to study the effects of gene modification on cells. This new array technology uses electroporation to target specific areas within a cell culture for transfection of genes. Electroporation arrays will allow high throughput analysis of gene effects on a given cell's response to a stress or a genes ability to restore normal cell function in disease modeling cells. Fluorescent imaging of dye labeled indicator molecules or cell viability will provide results indicating the most effective genes. The electroporation array consists of a microelectronic circuit, ancillary electronics, protecting electrode surface for cell culturing and a perfusion system for gene or drug delivery. The advantages of the current device are that there are 3200 sites for electroporation, all or any subsets of the electrodes can be activated. The cells are held in place by the electrode material. This technology could also be applied to high throughput screening of cell impermeant drugs.

Nuclear Terrorism - Dimensions, Options, and Perspectives in Moldova

NASA Astrophysics Data System (ADS)

Vaseashta, Ashok; Susmann, P.; Braman, Eric W.; Enaki, Nicolae A.

Securing nuclear materials, controlling contraband and preventing proliferation is an international priority to resolve using technology, diplomacy, strategic alliances, and if necessary, targeted military exercises. Nuclear security consists of complementary programs involving international legal and regulatory structure, intelligence and law enforcement agencies, border and customs forces, point and stand-off radiation detectors, personal protection equipment, preparedness for emergency and disaster, and consequence management teams. The strategic goal of UNSCR 1540 and the GICNT is to prevent nuclear materials from finding their way into the hands of our adversaries. This multi-jurisdictional and multi-agency effort demands tremendous coordination, technology assessment, policy development and guidance from several sectors. The overall goal envisions creating a secured environment that controls and protects nuclear materials while maintaining the free flow of commerce and individual liberty on international basis. Integral to such efforts are technologies to sense/detect nuclear material, provide advance information of nuclear smuggling routes, and other advanced means to control nuclear contraband and prevent proliferation. We provide an overview of GICNT and several initiatives supporting such efforts. An overview is provided of technological advances in support of point and stand-off detection and receiving advance information of nuclear material movement from perspectives of the Republic of Moldova.

Industrial Competitiveness and Technological Advancement: Debate Over Government Policy

DTIC Science & Technology

2007-03-19

private - sector technological development. Legislative activity over the past two decades has created a policy for technology development, albeit an ad hoc one. Because of the lack of consensus on the scope and direction of a national policy, Congress has taken an incremental approach aimed at creating new mechanisms to facilitate technological advancement in particular areas and making changes and improvements as necessary. Congressional action has mandated specific technology development programs and obligations in federal agencies that did not initially support such

77 FR 48157 - Office of the National Coordinator for Health Information Technology; Announcement of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-13

... on YouTube.com or Vimeo.com (the Video should be no longer than 2 minutes); A text description of... open call for the public to create short, inspiring videos sharing how you use technology to manage... Challenge invites you to create short, inspiring videos sharing how you use technology to manage your...

Fusing Technology into the School Design Process for Today and Tomorrow

ERIC Educational Resources Information Center

Strube, Marilyn K.; Thompson, Ann L.

2012-01-01

Students are creating content in a variety of ways and using numerous technologies to share that content that did not exist when their teachers were students. Students are interacting with the new technologies they see on TV, at the movies and through their social networks. They are creating and sharing websites, posting self made videos and…

Technological Innovation: Higher Education, Small Manufacturing Enterprises Growth and the Five (I) Technological Development Model in Kenya

ERIC Educational Resources Information Center

Ng'ang'a, S. I.; Kabethi, J. M.; Kiumbe, P. M.; Otii, Leonard

2014-01-01

In Less Developed Countries (LDCs), most graduates from higher institutions of learning are absorbed in the informal sector and/or micro and small enterprises. Knowledge development through training, research and experiential learning may lead to creating or discovering new knowledge/technology or creating new value, by applying…

Integrated e-Health approach based on vascular ultrasound and pulse wave analysis for asymptomatic atherosclerosis detection and cardiovascular risk stratification in the community.

PubMed

Santana, Daniel Bia; Zócalo, Yanina A; Armentano, Ricardo L

2012-03-01

New strategies are urgently needed to identify subjects at increased risk of atherosclerotic cardiovascular disease (ACVD) development or complications. A National Public University Center (CUiiDARTE) was created in Uruguay, based on six main pillars: 1) integration of experts in different disciplines and creation of multidisciplinary teams, 2) incidence in public and professional education programs to give training in the use of new technologies and to shift the focus from ACVD treatment to disease prevention, 3) implementation of free vascular studies in the community (distributed rather than centralized healthcare), 4) innovation and application of e-Health and noninvasive technology and approaches, 5) design and development of a biomedical approach to determine the target population and patient workflow, and 6) improvement in individual risk estimation and differentiation between aging and ACVD-related arterial changes using population-based epidemiological and statistical patient-specific models. This work describes main features of CUiiDARTE project implementation, the scientific and technological steps and innovations done for individual risk stratification, and sub-clinical ACVD diagnosis. © 2012 IEEE

CRISPR Mediated Genome Engineering and its Application in Industry.

PubMed

Kaboli, Saeed; Babazada, Hasan

2018-01-01

The CRISPR (clustered regularly interspaced short palindromic repeat)-Cas9 (CRISPR-associated nuclease 9) method has been dramatically changing the field of genome engineering. It is a rapid, highly efficient and versatile tool for precise modification of genome that uses a guide RNA (gRNA) to target Cas9 to a specific sequence. This novel RNA-guided genome-editing technique has become a revolutionary tool in biomedical science and has many innovative applications in different fields. In this review, we briefly introduce the Cas9-mediated genome-editing tool, summarize the recent advances in CRISPR/Cas9 technology to engineer the genomes of a wide variety of organisms, and discuss their applications to treatment of fungal and viral disease. We also discuss advantageous of CRISPR/Cas9 technology to drug design, creation of animal model, and to food, agricultural and energy sciences. Adoption of the CRISPR/Cas9 technology in biomedical and biotechnological researches would create innovative applications of it not only for breeding of strains exhibiting desired traits for specific industrial and medical applications, but also for investigation of genome function.

Software engineering

NASA Technical Reports Server (NTRS)

Fridge, Ernest M., III; Hiott, Jim; Golej, Jim; Plumb, Allan

1993-01-01

Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. The Johnson Space Center (JSC) created a significant set of tools to develop and maintain FORTRAN and C code during development of the space shuttle. This tool set forms the basis for an integrated environment to reengineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. The latest release of the environment was in Feb. 1992.

Microarray platform for omics analysis

NASA Astrophysics Data System (ADS)

Mecklenburg, Michael; Xie, Bin

2001-09-01

Microarray technology has revolutionized genetic analysis. However, limitations in genome analysis has lead to renewed interest in establishing 'omic' strategies. As we enter the post-genomic era, new microarray technologies are needed to address these new classes of 'omic' targets, such as proteins, as well as lipids and carbohydrates. We have developed a microarray platform that combines self- assembling monolayers with the biotin-streptavidin system to provide a robust, versatile immobilization scheme. A hydrophobic film is patterned on the surface creating an array of tension wells that eliminates evaporation effects thereby reducing the shear stress to which biomolecules are exposed to during immobilization. The streptavidin linker layer makes it possible to adapt and/or develop microarray based assays using virtually any class of biomolecules including: carbohydrates, peptides, antibodies, receptors, as well as them ore traditional DNA based arrays. Our microarray technology is designed to furnish seamless compatibility across the various 'omic' platforms by providing a common blueprint for fabricating and analyzing arrays. The prototype microarray uses a microscope slide footprint patterned with 2 by 96 flat wells. Data on the microarray platform will be presented.

"America COMPETES Reauthorization Act of 2010" or the "America Creating Opportunities to Meaningfully Promote Excellence in Technology, Education, and Science Reauthorization Act of 2010." House of Representatives, One Hundred Eleventh Congress, Second Session. H.R. 5116

ERIC Educational Resources Information Center

US House of Representatives, 2010

2010-01-01

The America COMPETES (Creating Opportunities to Meaningfully Promote Excellence in Technology, Education, and Science) Reauthorization Act of 2010 documented here is divided into the following titles: (1) Office of Science and Technology Policy (Coordination of Federal STEM [science, technology, engineering, and mathematics] education;…

Effects of Pre-Existing Target Structure on the Formation of Large Craters

NASA Technical Reports Server (NTRS)

Barnouin-Jha, O. S.; Cintala, M. J.; Crawford, D. A.

2003-01-01

The shapes of large-scale craters and the mechanics responsible for melt generation are influenced by broad and small-scale structures present in a target prior to impact. For example, well-developed systems of fractures often create craters that appear square in outline, good examples being Meteor Crater, AZ and the square craters of 433 Eros. Pre-broken target material also affects melt generation. Kieffer has shown how the shock wave generated in Coconino sandstone at Meteor crater created reverberations which, in combination with the natural target heterogeneity present, created peaks and troughs in pressure and compressed density as individual grains collided to produce a range of shock mineralogies and melts within neighboring samples. In this study, we further explore how pre-existing target structure influences various aspects of the cratering process. We combine experimental and numerical techniques to explore the connection between the scales of the impact generated shock wave and the pre-existing target structure. We focus on the propagation of shock waves in coarse, granular media, emphasizing its consequences on excavation, crater growth, ejecta production, cratering efficiency, melt generation, and crater shape. As a baseline, we present a first series of results for idealized targets where the particles are all identical in size and possess the same shock impedance. We will also present a few results, whereby we increase the complexities of the target properties by varying the grain size, strength, impedance and frictional properties. In addition, we investigate the origin and implications of reverberations that are created by the presence of physical and chemical heterogeneity in a target.

Invasive species management and research using GIS

USGS Publications Warehouse

Holcombe, Tracy R.; Stohlgren, Thomas J.; Jarnevich, Catherine S.

2007-01-01

Geographical Information Systems (GIS) are powerful tools in the field of invasive species management. GIS can be used to create potential distribution maps for all manner of taxa, including plants, animals, and diseases. GIS also performs well in the early detection and rapid assessment of invasive species. Here, we used GIS applications to investigate species richness and invasion patterns in fish in the United States (US) at the 6-digit Hydrologic Unit Code (HUC) level. We also created maps of potential spread of the cane toad (Bufo marinus) in the southeastern US at the 8-digit HUC level using regression and environmental envelope techniques. Equipped with this potential map, resource managers can target their field surveys to areas most vulnerable to invasion. Advances in GIS technology, maps, data, and many of these techniques can be found on websites such as the National Institute of Invasive Species Science (www.NIISS.org). Such websites provide a forum for data sharing and analysis that is an invaluable service to the invasive species community.

What factors determine therapists' acceptance of new technologies for rehabilitation – a study using the Unified Theory of Acceptance and Use of Technology (UTAUT).

PubMed

Liu, Lili; Miguel Cruz, Antonio; Rios Rincon, Adriana; Buttar, Vickie; Ranson, Quentin; Goertzen, Darrell

2015-01-01

The aim of this study was to examine what factors affect the acceptance behavior and use of new technologies for rehabilitation by therapists at a large rehabilitation hospital in Canada. A self-administrated paper-based survey was created by adapting scales with high levels of internal consistency in prior research using the Unified Theory of Acceptance and Use of Technology (UTAUT). Items were scored on a 7-point Likert scale, ranging from "strongly disagree (1)" to "strongly agree (7)". The target population was all occupational therapists (OT) and physical therapists (PT) involved with the provision of therapeutic interventions at the hospital. Our research model was tested using partial least squares (PLS) technique. Performance expectancy was the strongest salient construct for behavioral intention to use new technologies in rehabilitation, whereas neither effort expectancy nor social influence were salient constructs for behavioral intention to use new technologies; (4) facilitating condition and behavioral intention to use new technologies were salient constructs for current use of new technologies in rehabilitation, with facilitating condition the strongest salient for current use of new technologies in rehabilitation. In a large rehabilitation hospital where use of new technologies in rehabilitation is not mandatory, performance expectancy, or how the technology can help in therapists' work, was the most important factor in determining therapists' acceptance and use of technologies. However, effort expectancy and social influence constructs were not important, i.e. therapists were not influenced by the degree of difficulty or social pressures to use technologies. Behavioral intention and facilitating condition, or institutional support, are related to current use of new technologies in rehabilitation.

The Healthgrid White Paper.

PubMed

Breton, Vincent; Dean, Kevin; Solomonides, Tony; Blanquer, I; Hernandez, V; Medico, E; Maglaveras, N; Benkner, S; Lonsdale, G; Lloyd, S; Hassan, K; McClatchey, R; Miguet, S; Montagnat, J; Pennec, X; De Neve, W; De Wagter, C; Heeren, G; Maigne, L; Nozaki, K; Taillet, M; Bilofsky, H; Ziegler, R; Hoffman, M; Jones, C; Cannataro, M; Veltri, P; Aloisio, G; Fiore, S; Mirto, M; Chouvarda, I; Koutkias, V; Malousi, A; Lopez, V; Oliveira, I; Sanchez, J P; Martin-Sanchez, F; De Moor, G; Claerhout, B; Herveg, J A M

2005-01-01

Over the last four years, a community of researchers working on Grid and High Performance Computing technologies started discussing the barriers and opportunities that grid technologies must face and exploit for the development of health-related applications. This interest lead to the first Healthgrid conference, held in Lyon, France, on January 16th-17th, 2003, with the focus of creating increased awareness about the possibilities and advantages linked to the deployment of grid technologies in health, ultimately targeting the creation of a European/international grid infrastructure for health. The topics of this conference converged with the position of the eHealth division of the European Commission, whose mandate from the Lisbon Meeting was "To develop an intelligent environment that enables ubiquitous management of citizens' health status, and to assist health professionals in coping with some major challenges, risk management and the integration into clinical practice of advances in health knowledge." In this context "Health" involves not only clinical procedures but covers the whole range of information from molecular level (genetic and proteomic information) over cells and tissues, to the individual and finally the population level (social healthcare). Grid technology offers the opportunity to create a common working backbone for all different members of this large "health family" and will hopefully lead to an increased awareness and interoperability among disciplines. The first HealthGrid conference led to the creation of the Healthgrid association, a non-profit research association legally incorporated in France but formed from the broad community of European researchers and institutions sharing expertise in health grids. After the second Healthgrid conference, held in Clermont-Ferrand on January 29th-30th, 2004, the need for a "white paper" on the current status and prospective of health grids was raised. Over fifty experts from different areas of grid technologies, eHealth applications and the medical world were invited to contribute to the preparation of this document.

Applications of the CRISPR-Cas9 system in kidney research.

PubMed

Higashijima, Yoshiki; Hirano, Seiichi; Nangaku, Masaomi; Nureki, Osamu

2017-08-01

The recently discovered clustered regularly interspaced short palindromic repeat (CRISPR)-CRISPR-associated protein 9 (Cas9) is an RNA-guided DNA nuclease, and has been harnessed for the development of simple, efficient, and relatively inexpensive technologies to precisely manipulate the genomic information in virtually all cell types and organisms. The CRIPSR-Cas9 systems have already been effectively used to disrupt multiple genes simultaneously, create conditional alleles, and generate reporter proteins, even in vivo. The ability of Cas9 to target a specific genomic region has also been exploited for various applications, such as transcriptional regulation, epigenetic control, and chromosome labeling. Here we first describe the molecular mechanism of the RNA-guided DNA targeting by the CRISPR-Cas9 system and then outline the current applications of this system as a genome-editing tool in mice and other species, to better model and study human diseases. We also discuss the practical and potential uses of the CRISPR-Cas9 system in kidney research and highlight the further applications of this technology beyond genome editing. Undoubtedly, the CRISPR-Cas9 system holds enormous potential for revolutionizing and accelerating kidney research and therapeutic applications in the future. Copyright © 2017 International Society of Nephrology. Published by Elsevier Inc. All rights reserved.

CRISPR/Cas9-loxP-Mediated Gene Editing as a Novel Site-Specific Genetic Manipulation Tool.

PubMed

Yang, Fayu; Liu, Changbao; Chen, Ding; Tu, Mengjun; Xie, Haihua; Sun, Huihui; Ge, Xianglian; Tang, Lianchao; Li, Jin; Zheng, Jiayong; Song, Zongming; Qu, Jia; Gu, Feng

2017-06-16

Cre-loxP, as one of the site-specific genetic manipulation tools, offers a method to study the spatial and temporal regulation of gene expression/inactivation in order to decipher gene function. CRISPR/Cas9-mediated targeted genome engineering technologies are sparking a new revolution in biological research. Whether the traditional site-specific genetic manipulation tool and CRISPR/Cas9 could be combined to create a novel genetic tool for highly specific gene editing is not clear. Here, we successfully generated a CRISPR/Cas9-loxP system to perform gene editing in human cells, providing the proof of principle that these two technologies can be used together for the first time. We also showed that distinct non-homologous end-joining (NHEJ) patterns from CRISPR/Cas9-mediated gene editing of the targeting sequence locates at the level of plasmids (episomal) and chromosomes. Specially, the CRISPR/Cas9-mediated NHEJ pattern in the nuclear genome favors deletions (64%-68% at the human AAVS1 locus versus 4%-28% plasmid DNA). CRISPR/Cas9-loxP, a novel site-specific genetic manipulation tool, offers a platform for the dissection of gene function and molecular insights into DNA-repair pathways. Copyright © 2017 The Author(s). Published by Elsevier Inc. All rights reserved.

The use of high-speed imaging in education

NASA Astrophysics Data System (ADS)

Kleine, H.; McNamara, G.; Rayner, J.

2017-02-01

Recent improvements in camera technology and the associated improved access to high-speed camera equipment have made it possible to use high-speed imaging not only in a research environment but also specifically for educational purposes. This includes high-speed sequences that are created both with and for a target audience of students in high schools and universities. The primary goal is to engage students in scientific exploration by providing them with a tool that allows them to see and measure otherwise inaccessible phenomena. High-speed imaging has the potential to stimulate students' curiosity as the results are often surprising or may contradict initial assumptions. "Live" demonstrations in class or student- run experiments are highly suitable to have a profound influence on student learning. Another aspect is the production of high-speed images for demonstration purposes. While some of the approaches known from the application of high speed imaging in a research environment can simply be transferred, additional techniques must often be developed to make the results more easily accessible for the targeted audience. This paper describes a range of student-centered activities that can be undertaken which demonstrate how student engagement and learning can be enhanced through the use of high speed imaging using readily available technologies.

Site characterization at the Rabbit Valley Geophysical Performance Evaluation Range

NASA Astrophysics Data System (ADS)

Koppenjan, S.,; Martinez, M.

The United States Department of Energy (US DOE) is developing a Geophysical Performance Evaluation Range (GPER) at Rabbit Valley located 30 miles west of Grand Junction, Colorado. The purpose of the range is to provide a test area for geophysical instruments and survey procedures. Assessment of equipment accuracy and resolution is accomplished through the use of static and dynamic physical models. These models include targets with fixed configurations and targets that can be re-configured to simulate specific specifications. Initial testing (1991) combined with the current tests at the Rabbit Valley GPER will establish baseline data and will provide performance criteria for the development of geophysical technologies and techniques. The US DOE's Special Technologies Laboratory (STL) staff has conducted a Ground Penetrating Radar (GPR) survey of the site with its stepped FM-CW GPR. Additionally, STL contracted several other geophysical tests. These include an airborne GPR survey incorporating a 'chirped' FM-CW GPR system and a magnetic survey with a surfaced-towed magnetometer array unit Ground-based and aerial video and still frame pictures were also acquired. STL compiled and analyzed all of the geophysical maps and created a site characterization database. This paper discusses the results of the multi-sensor geophysical studies performed at Rabbit Valley and the future plans for the site.

Site characterization at the Rabbit Valley Geophysical Performance Evaluation Range

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koppenjan, S,; Martinez, M.

1994-06-01

The United States Department of Energy (US DOE) is developing a Geophysical Performance Evaluation Range (GPER) at Rabbit Valley located 30 miles west of Grand Junction, Colorado. The purpose of the range is to provide a test area for geophysical instruments and survey procedures. Assessment of equipment accuracy and resolution is accomplished through the use of static and dynamic physical models. These models include targets with fixed configurations and targets that can be re-configured to simulate specific specifications. Initial testing (1991) combined with the current tests at the Rabbit Valley GPER will establish baseline data and will provide performance criteriamore » for the development of geophysical technologies and techniques. The US DOE`s Special Technologies Laboratory (STL) staff has conducted a Ground Penetrating Radar (GPR) survey of the site with its stepped FM-CW GPR. Additionally, STL contracted several other geophysical tests. These include an airborne GPR survey incorporating a ``chirped`` FM-CW GPR system and a magnetic survey with a surfaced-towed magnetometer array unit Ground-based and aerial video and still frame pictures were also acquired. STL compiled and analyzed all of the geophysical maps and created a site characterization database. This paper discusses the results of the multi-sensor geophysical studies performed at Rabbit Valley and the future plans for the site.« less

Dynamic, electronically switchable surfaces for membrane protein microarrays.

PubMed

Tang, C S; Dusseiller, M; Makohliso, S; Heuschkel, M; Sharma, S; Keller, B; Vörös, J

2006-02-01

Microarray technology is a powerful tool that provides a high throughput of bioanalytical information within a single experiment. These miniaturized and parallelized binding assays are highly sensitive and have found widespread popularity especially during the genomic era. However, as drug diagnostics studies are often targeted at membrane proteins, the current arraying technologies are ill-equipped to handle the fragile nature of the protein molecules. In addition, to understand the complex structure and functions of proteins, different strategies to immobilize the probe molecules selectively onto a platform for protein microarray are required. We propose a novel approach to create a (membrane) protein microarray by using an indium tin oxide (ITO) microelectrode array with an electronic multiplexing capability. A polycationic, protein- and vesicle-resistant copolymer, poly(l-lysine)-grafted-poly(ethylene glycol) (PLL-g-PEG), is exposed to and adsorbed uniformly onto the microelectrode array, as a passivating adlayer. An electronic stimulation is then applied onto the individual ITO microelectrodes resulting in the localized release of the polymer thus revealing a bare ITO surface. Different polymer and biological moieties are specifically immobilized onto the activated ITO microelectrodes while the other regions remain protein-resistant as they are unaffected by the induced electrical potential. The desorption process of the PLL-g-PEG is observed to be highly selective, rapid, and reversible without compromising on the integrity and performance of the conductive ITO microelectrodes. As such, we have successfully created a stable and heterogeneous microarray of biomolecules by using selective electronic addressing on ITO microelectrodes. Both pharmaceutical diagnostics and biomedical technology are expected to benefit directly from this unique method.

Translational Science by Public Biotechnology Companies in the IPO“Class of 2000”: The Impact of Technological Maturity

PubMed Central

McNamee, Laura; Ledley, Fred

2013-01-01

The biotechnology industry plays a central role in the translation of nascent biomedical science into both products that offer material health benefits and creating capital growth. This study examines the relationship between the maturity of technologies in a characteristic life cycle and value creation by biotechnology companies. We examined the core technology, product development pipelines, and capitalization for a cohort of biotechnology companies that completed an IPO in 2000. Each of these companies was well financed and had core technologies on the leading edge of biological science. We found that companies with the least mature technologies had significantly higher valuations at IPO, but failed to develop products based on these technologies over the ensuing decade, and created less capital growth than companies with more mature technologies at IPO. The observation that this cohort of recently public biotechnology companies was not effective in creating value from nascent science suggests the need for new, evidence-based business strategies for translational science. PMID:24358154

Translational science by public biotechnology companies in the IPO "class of 2000": the impact of technological maturity.

PubMed

McNamee, Laura; Ledley, Fred

2013-01-01

The biotechnology industry plays a central role in the translation of nascent biomedical science into both products that offer material health benefits and creating capital growth. This study examines the relationship between the maturity of technologies in a characteristic life cycle and value creation by biotechnology companies. We examined the core technology, product development pipelines, and capitalization for a cohort of biotechnology companies that completed an IPO in 2000. Each of these companies was well financed and had core technologies on the leading edge of biological science. We found that companies with the least mature technologies had significantly higher valuations at IPO, but failed to develop products based on these technologies over the ensuing decade, and created less capital growth than companies with more mature technologies at IPO. The observation that this cohort of recently public biotechnology companies was not effective in creating value from nascent science suggests the need for new, evidence-based business strategies for translational science.

Inserting new technology into small missions

NASA Technical Reports Server (NTRS)

Deutsch, L. J.

2001-01-01

Part of what makes small missions small is that they have less money. Executing missions at low cost implies extensive use of cost sharing with other missions or use of existing solutions. However, in order to create many small missions, new technology must be developed, applied, and assimilated. Luckily, there are methods for creating new technology and inserting it into faster-better-cheaper (FBC) missions.

A user-centered model for designing consumer mobile health (mHealth) applications (apps).

PubMed

Schnall, Rebecca; Rojas, Marlene; Bakken, Suzanne; Brown, William; Carballo-Dieguez, Alex; Carry, Monique; Gelaude, Deborah; Mosley, Jocelyn Patterson; Travers, Jasmine

2016-04-01

Mobile technologies are a useful platform for the delivery of health behavior interventions. Yet little work has been done to create a rigorous and standardized process for the design of mobile health (mHealth) apps. This project sought to explore the use of the Information Systems Research (ISR) framework as guide for the design of mHealth apps. Our work was guided by the ISR framework which is comprised of 3 cycles: Relevance, Rigor and Design. In the Relevance cycle, we conducted 5 focus groups with 33 targeted end-users. In the Rigor cycle, we performed a review to identify technology-based interventions for meeting the health prevention needs of our target population. In the Design Cycle, we employed usability evaluation methods to iteratively develop and refine mock-ups for a mHealth app. Through an iterative process, we identified barriers and facilitators to the use of mHealth technology for HIV prevention for high-risk MSM, developed 'use cases' and identified relevant functional content and features for inclusion in a design document to guide future app development. Findings from our work support the use of the ISR framework as a guide for designing future mHealth apps. Results from this work provide detailed descriptions of the user-centered design and system development and have heuristic value for those venturing into the area of technology-based intervention work. Findings from this study support the use of the ISR framework as a guide for future mHealth app development. Use of the ISR framework is a potentially useful approach for the design of a mobile app that incorporates end-users' design preferences. Copyright © 2016 Elsevier Inc. All rights reserved.

Factors shaping effective utilization of health information technology in urban safety-net clinics.

PubMed

George, Sheba; Garth, Belinda; Fish, Allison; Baker, Richard

2013-09-01

Urban safety-net clinics are considered prime targets for the adoption of health information technology innovations; however, little is known about their utilization in such safety-net settings. Current scholarship provides limited guidance on the implementation of health information technology into safety-net settings as it typically assumes that adopting institutions have sufficient basic resources. This study addresses this gap by exploring the unique challenges urban resource-poor safety-net clinics must consider when adopting and utilizing health information technology. In-depth interviews (N = 15) were used with key stakeholders (clinic chief executive officers, medical directors, nursing directors, chief financial officers, and information technology directors) from staff at four clinics to explore (a) nonhealth information technology-related clinic needs, (b) how health information technology may provide solutions, and (c) perceptions of and experiences with health information technology. Participants identified several challenges, some of which appear amenable to health information technology solutions. Also identified were requirements for effective utilization of health information technology including physical infrastructural improvements, funding for equipment/training, creation of user groups to share health information technology knowledge/experiences, and specially tailored electronic billing guidelines. We found that despite the potential benefit that can be derived from health information technologies, the unplanned and uninformed introduction of these tools into these settings might actually create more problems than are solved. From these data, we were able to identify a set of factors that should be considered when integrating health information technology into the existing workflows of low-resourced urban safety-net clinics in order to maximize their utilization and enhance the quality of health care in such settings.

Laser Technology.

ERIC Educational Resources Information Center

Gauger, Robert

1993-01-01

Describes lasers and indicates that learning about laser technology and creating laser technology activities are among the teacher enhancement processes needed to strengthen technology education. (JOW)

3D-Printing Technologies for Craniofacial Rehabilitation, Reconstruction, and Regeneration.

PubMed

Nyberg, Ethan L; Farris, Ashley L; Hung, Ben P; Dias, Miguel; Garcia, Juan R; Dorafshar, Amir H; Grayson, Warren L

2017-01-01

The treatment of craniofacial defects can present many challenges due to the variety of tissue-specific requirements and the complexity of anatomical structures in that region. 3D-printing technologies provide clinicians, engineers and scientists with the ability to create patient-specific solutions for craniofacial defects. Currently, there are three key strategies that utilize these technologies to restore both appearance and function to patients: rehabilitation, reconstruction and regeneration. In rehabilitation, 3D-printing can be used to create prostheses to replace or cover damaged tissues. Reconstruction, through plastic surgery, can also leverage 3D-printing technologies to create custom cutting guides, fixation devices, practice models and implanted medical devices to improve patient outcomes. Regeneration of tissue attempts to replace defects with biological materials. 3D-printing can be used to create either scaffolds or living, cellular constructs to signal tissue-forming cells to regenerate defect regions. By integrating these three approaches, 3D-printing technologies afford the opportunity to develop personalized treatment plans and design-driven manufacturing solutions to improve aesthetic and functional outcomes for patients with craniofacial defects.

3D-Printing Technologies for Craniofacial Rehabilitation, Reconstruction, and Regeneration

PubMed Central

Nyberg, Ethan L.; Farris, Ashley L.; Hung, Ben P.; Dias, Miguel; Garcia, Juan R.; Dorafshar, Amir H.; Grayson, Warren L.

2016-01-01

The treatment of craniofacial defects can present many challenges due to the variety of tissue-specific requirements and the complexity of anatomical structures in that region. 3D-printing technologies provide clinicians, engineers and scientists with the ability to create patient-specific solutions for craniofacial defects. Currently, there are 3 key strategies that utilize these technologies to restore both appearance and function to patients: rehabilitation, reconstruction and regeneration. In rehabilitation, 3D-printing can be used to create prostheses to replace or cover damaged tissues. Reconstruction, through plastic surgery, can also leverage 3D-printing technologies to create custom cutting guides, fixation devices, practice models and implanted medical devices to improve patient outcomes. Regeneration of tissue attempts to replace defects with biological materials. 3D-printing can be used to create either scaffolds or living, cellular constructs to signal tissue-forming cells to regenerate defect regions. By integrating these three approaches, 3D-printing technologies afford the opportunity to develop personalized treatment plans and design-driven manufacturing solutions to improve aesthetic and functional outcomes for patients with craniofacial defects. PMID:27295184

Adopting new technologies in stroke rehabilitation: the influence of the US health care system.

PubMed

Stein, J

2009-06-01

Stroke rehabilitation is entering a new era of technological innovation, including the development of robotic aids for therapy, peripheral electrical stimulation devices, and brain stimulation systems. These technologies have the potential to significantly improve the efficiency and efficacy of stroke rehabilitation. The United States health care system creates both opportunities for new technologies to be created and adopted, as well as important barriers. Inadequate support of clinical trials of the efficacy of new non-invasive devices is a particular concern for practitioners seeking to determine if new devices are clinically useful. Government support of clinical trials of efficacy, coupled with reform of FDA approval processes for novel therapies, is needed to create an evidence-based approach to improving stroke rehabilitation.

Production and characterization of murine models of classic and intermediate maple syrup urine disease

PubMed Central

Homanics, Gregg E; Skvorak, Kristen; Ferguson, Carolyn; Watkins, Simon; Paul, Harbhajan S

2006-01-01

Background Maple Syrup Urine Disease (MSUD) is an inborn error of metabolism caused by a deficiency of branched-chain keto acid dehydrogenase. MSUD has several clinical phenotypes depending on the degree of enzyme deficiency. Current treatments are not satisfactory and require new approaches to combat this disease. A major hurdle in developing new treatments has been the lack of a suitable animal model. Methods To create a murine model of classic MSUD, we used gene targeting and embryonic stem cell technologies to create a mouse line that lacked a functional E2 subunit gene of branched-chain keto acid dehydrogenase. To create a murine model of intermediate MSUD, we used transgenic technology to express a human E2 cDNA on the knockout background. Mice of both models were characterized at the molecular, biochemical, and whole animal levels. Results By disrupting the E2 subunit gene of branched-chain keto acid dehydrogenase, we created a gene knockout mouse model of classic MSUD. The homozygous knockout mice lacked branched-chain keto acid dehydrogenase activity, E2 immunoreactivity, and had a 3-fold increase in circulating branched-chain amino acids. These metabolic derangements resulted in neonatal lethality. Transgenic expression of a human E2 cDNA in the liver of the E2 knockout animals produced a model of intermediate MSUD. Branched-chain keto acid dehydrogenase activity was 5–6% of normal and was sufficient to allow survival, but was insufficient to normalize circulating branched-chain amino acids levels, which were intermediate between wildtype and the classic MSUD mouse model. Conclusion These mice represent important animal models that closely approximate the phenotype of humans with the classic and intermediate forms of MSUD. These animals provide useful models to further characterize the pathogenesis of MSUD, as well as models to test novel therapeutic strategies, such as gene and cellular therapies, to treat this devastating metabolic disease. PMID:16579849

Improving polio vaccination coverage in Nigeria through the use of geographic information system technology.

PubMed

Barau, Inuwa; Zubairu, Mahmud; Mwanza, Michael N; Seaman, Vincent Y

2014-11-01

Historically, microplanning for polio vaccination campaigns in Nigeria relied on inaccurate and incomplete hand-drawn maps, resulting in the exclusion of entire settlements and missed children. The goal of this work was to create accurate, coordinate-based maps for 8 polio-endemic states in northern Nigeria to improve microplanning and support tracking of vaccination teams, thereby enhancing coverage, supervision, and accountability. Settlement features were identified in the target states, using high-resolution satellite imagery. Field teams collected names and geocoordinates for each settlement feature, with the help of local guides. Global position system (GPS) tracking of vaccination teams was conducted in selected areas and daily feedback provided to supervisors. Geographic information system (GIS)-based maps were created for 2238 wards in the 8 target states. The resulting microplans included all settlements and more-efficient team assignments, owing to the improved spatial reference. GPS tracking was conducted in 111 high-risk local government areas, resulting in improved team performance and the identification of missed/poorly covered settlements. Accurate and complete maps are a necessary part of an effective polio microplan, and tracking vaccinators gives supervisors a tool to ensure that all settlements are visited. © The Author 2014. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Standardizing Naming Conventions in Radiation Oncology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Santanam, Lakshmi; Hurkmans, Coen; Mutic, Sasa

2012-07-15

Purpose: The aim of this study was to report on the development of a standardized target and organ-at-risk naming convention for use in radiation therapy and to present the nomenclature for structure naming for interinstitutional data sharing, clinical trial repositories, integrated multi-institutional collaborative databases, and quality control centers. This taxonomy should also enable improved plan benchmarking between clinical institutions and vendors and facilitation of automated treatment plan quality control. Materials and Methods: The Advanced Technology Consortium, Washington University in St. Louis, Radiation Therapy Oncology Group, Dutch Radiation Oncology Society, and the Clinical Trials RT QA Harmonization Group collaborated in creatingmore » this new naming convention. The International Commission on Radiation Units and Measurements guidelines have been used to create standardized nomenclature for target volumes (clinical target volume, internal target volume, planning target volume, etc.), organs at risk, and planning organ-at-risk volumes in radiation therapy. The nomenclature also includes rules for specifying laterality and margins for various structures. The naming rules distinguish tumor and nodal planning target volumes, with correspondence to their respective tumor/nodal clinical target volumes. It also provides rules for basic structure naming, as well as an option for more detailed names. Names of nonstandard structures used mainly for plan optimization or evaluation (rings, islands of dose avoidance, islands where additional dose is needed [dose painting]) are identified separately. Results: In addition to its use in 16 ongoing Radiation Therapy Oncology Group advanced technology clinical trial protocols and several new European Organization for Research and Treatment of Cancer protocols, a pilot version of this naming convention has been evaluated using patient data sets with varying treatment sites. All structures in these data sets were satisfactorily identified using this nomenclature. Conclusions: Use of standardized naming conventions is important to facilitate comparison of dosimetry across patient datasets. The guidelines presented here will facilitate international acceptance across a wide range of efforts, including groups organizing clinical trials, Radiation Oncology Institute, Dutch Radiation Oncology Society, Integrating the Healthcare Enterprise, Radiation Oncology domain (IHE-RO), and Digital Imaging and Communication in Medicine (DICOM).« less

Strand Invasion Based Amplification (SIBA®): a novel isothermal DNA amplification technology demonstrating high specificity and sensitivity for a single molecule of target analyte.

PubMed

Hoser, Mark J; Mansukoski, Hannu K; Morrical, Scott W; Eboigbodin, Kevin E

2014-01-01

Isothermal nucleic acid amplification technologies offer significant advantages over polymerase chain reaction (PCR) in that they do not require thermal cycling or sophisticated laboratory equipment. However, non-target-dependent amplification has limited the sensitivity of isothermal technologies and complex probes are usually required to distinguish between non-specific and target-dependent amplification. Here, we report a novel isothermal nucleic acid amplification technology, Strand Invasion Based Amplification (SIBA). SIBA technology is resistant to non-specific amplification, is able to detect a single molecule of target analyte, and does not require target-specific probes. The technology relies on the recombinase-dependent insertion of an invasion oligonucleotide (IO) into the double-stranded target nucleic acid. The duplex regions peripheral to the IO insertion site dissociate, thereby enabling target-specific primers to bind. A polymerase then extends the primers onto the target nucleic acid leading to exponential amplification of the target. The primers are not substrates for the recombinase and are, therefore unable to extend the target template in the absence of the IO. The inclusion of 2'-O-methyl RNA to the IO ensures that it is not extendible and that it does not take part in the extension of the target template. These characteristics ensure that the technology is resistant to non-specific amplification since primer dimers or mis-priming are unable to exponentially amplify. Consequently, SIBA is highly specific and able to distinguish closely-related species with single molecule sensitivity in the absence of complex probes or sophisticated laboratory equipment. Here, we describe this technology in detail and demonstrate its use for the detection of Salmonella.

Camouflage target reconnaissance based on hyperspectral imaging technology

NASA Astrophysics Data System (ADS)

Hua, Wenshen; Guo, Tong; Liu, Xun

2015-08-01

Efficient camouflaged target reconnaissance technology makes great influence on modern warfare. Hyperspectral images can provide large spectral range and high spectral resolution, which are invaluable in discriminating between camouflaged targets and backgrounds. Hyperspectral target detection and classification technology are utilized to achieve single class and multi-class camouflaged targets reconnaissance respectively. Constrained energy minimization (CEM), a widely used algorithm in hyperspectral target detection, is employed to achieve one class camouflage target reconnaissance. Then, support vector machine (SVM), a classification method, is proposed to achieve multi-class camouflage target reconnaissance. Experiments have been conducted to demonstrate the efficiency of the proposed method.

IQ-Station: A Low Cost Portable Immersive Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eric Whiting; Patrick O'Leary; William Sherman

2010-11-01

The emergence of inexpensive 3D TV’s, affordable input and rendering hardware and open-source software has created a yeasty atmosphere for the development of low-cost immersive environments (IE). A low cost IE system, or IQ-station, fashioned from commercial off the shelf technology (COTS), coupled with a targeted immersive application can be a viable laboratory instrument for enhancing scientific workflow for exploration and analysis. The use of an IQ-station in a laboratory setting also has the potential of quickening the adoption of a more sophisticated immersive environment as a critical enabler in modern scientific and engineering workflows. Prior work in immersive environmentsmore » generally required either a head mounted display (HMD) system or a large projector-based implementation both of which have limitations in terms of cost, usability, or space requirements. The solution presented here provides an alternative platform providing a reasonable immersive experience that addresses those limitations. Our work brings together the needed hardware and software to create a fully integrated immersive display and interface system that can be readily deployed in laboratories and common workspaces. By doing so, it is now feasible for immersive technologies to be included in researchers’ day-to-day workflows. The IQ-Station sets the stage for much wider adoption of immersive environments outside the small communities of virtual reality centers.« less

Education, Technology and Health Literacy.

PubMed

Lindgren, Kurt; Koldkjær Sølling, Ina; Carøe, Per; Siggaard Mathiesen, Kirsten

2015-01-01

The purpose of this study is to develop an interdisciplinary learning environment between education in technology, business, and nursing. This collaboration creates natural interest and motivation for welfare technology. The aim of establishing an interaction between these three areas of expertise is to create an understanding of skills and cultural differences in each area. Futhermore, the aim is to enable future talents to gain knowledge and skills to improve health literacy among senior citizens. Based on a holistic view of welfare technology, a Student Academy was created as a theoretically- and practically-oriented learning center. The mission of the Student Academy is to support and facilitate education in order to maintain and upgrade knowledge and skills in information technology and information management related to e-health and health literacy. The Student Academy inspires students, stakeholders, politicians, DanAge Association members, companies, and professionals to participate in training, projects, workshops, and company visits.

Creating a Pilot Educational Psychiatry Website: Opportunities, Barriers, and Next Steps.

PubMed

Torous, John; O'Connor, Ryan; Franzen, Jamie; Snow, Caitlin; Boland, Robert; Kitts, Robert

2015-11-05

While medical students and residents may be utilizing websites as online learning resources, medical trainees and educators now have the opportunity to create such educational websites and digital tools on their own. However, the process and theory of building educational websites for medical education have not yet been fully explored. To understand the opportunities, barriers, and process of creating a novel medical educational website. We created a pilot psychiatric educational website to better understand the options, opportunities, challenges, and processes involved in the creation of a psychiatric educational website. We sought to integrate visual and interactive Web design elements to underscore the potential of such Web technology. A pilot website (PsychOnCall) was created to demonstrate the potential of Web technology in medical and psychiatric education. Creating an educational website is now technically easier than ever before, and the primary challenge no longer is technology but rather the creation, validation, and maintenance of information for such websites as well as translating text-based didactics into visual and interactive tools. Medical educators can influence the design and implementation of online educational resources through creating their own websites and engaging medical students and residents in the process.

Creating a Pilot Educational Psychiatry Website: Opportunities, Barriers, and Next Steps

PubMed Central

O'Connor, Ryan; Franzen, Jamie; Snow, Caitlin; Boland, Robert; Kitts, Robert

2015-01-01

Background While medical students and residents may be utilizing websites as online learning resources, medical trainees and educators now have the opportunity to create such educational websites and digital tools on their own. However, the process and theory of building educational websites for medical education have not yet been fully explored. Objective To understand the opportunities, barriers, and process of creating a novel medical educational website. Methods We created a pilot psychiatric educational website to better understand the options, opportunities, challenges, and processes involved in the creation of a psychiatric educational website. We sought to integrate visual and interactive Web design elements to underscore the potential of such Web technology. Results A pilot website (PsychOnCall) was created to demonstrate the potential of Web technology in medical and psychiatric education. Conclusions Creating an educational website is now technically easier than ever before, and the primary challenge no longer is technology but rather the creation, validation, and maintenance of information for such websites as well as translating text-based didactics into visual and interactive tools. Medical educators can influence the design and implementation of online educational resources through creating their own websites and engaging medical students and residents in the process. PMID:27731837

A CRISPR Cas9-based gene drive platform for genetic interaction analysis in Candida albicans

PubMed Central

Shapiro, Rebecca S.; Chavez, Alejandro; Porter, Caroline B. M.; Hamblin, Meagan; Kaas, Christian S.; DiCarlo, James E.; Zeng, Guisheng; Xu, Xiaoli; Revtovich, Alexey V.; Kirienko, Natalia V.; Wang, Yue; Church, George M.; Collins, James J.

2018-01-01

Candida albicans is the leading cause of fungal infections; yet, complex genetic interaction analysis remains cumbersome in this diploid pathogen. Here, we developed a CRISPR-Cas9-based ‘gene drive array’ (GDA) platform to facilitate efficient genetic analysis in C. albicans. In our system, a modified DNA donor molecule acts as a selfish genetic element, replaces the targeted site, and propagates to replace additional wild-type loci. Using mating-competent C. albicans haploids, each carrying a different gene drive disabling a gene of interest, we are able to create diploid strains that are homozygous double-deletion mutants. We generate double-gene deletion libraries to demonstrate this technology, targeting antifungal efflux and biofilm adhesion factors. We screen these libraries to identify virulence regulators and determine how genetic networks shift under diverse conditions. This platform transforms our ability to perform genetic interaction analysis in C. albicans and is readily extended to other fungal pathogens. PMID:29062088

Rehabilitation treatment taxonomy: implications and continuations.

PubMed

P Dijkers, Marcel; Hart, Tessa; Whyte, John; M Zanca, Jeanne; Packel, Andrew; Tsaousides, Theodore

2014-01-01

In relation to the conceptual framework for a rehabilitation treatment taxonomy (RTT), which has been proposed in other articles in this supplement, this article discusses a number of issues relevant to its further development, including creating distinctions within the major target classes; the nature and quantity of allowable targets of treatment; and bracketing as a way of specifying (1) the skill or knowledge taught; (2) the nature of compensation afforded by changes in the environment, assistive technology, and orthotics/prosthetics; and (3) the ingredients in homework a clinician assigns. Clarification is provided regarding the role of the International Classification of Functioning, Disability and Health, focusing a taxonomy on ingredients versus other observable aspects of treatment, and regarding our lack of knowledge and its impact on taxonomy development. Finally, this article discusses the immediate implications of the work to date and presents the need for rehabilitation stakeholders of all disciplines to be involved in further RTT development. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Direct production of mouse disease models by embryo microinjection of TALENs and oligodeoxynucleotides

PubMed Central

Wefers, Benedikt; Meyer, Melanie; Ortiz, Oskar; Hrabé de Angelis, Martin; Hansen, Jens; Wurst, Wolfgang; Kühn, Ralf

2013-01-01

The study of genetic disease mechanisms relies mostly on targeted mouse mutants that are derived from engineered embryonic stem (ES) cells. Nevertheless, the establishment of mutant ES cells is laborious and time-consuming, restricting the study of the increasing number of human disease mutations discovered by high-throughput genomic analysis. Here, we present an advanced approach for the production of mouse disease models by microinjection of transcription activator-like effector nucleases (TALENs) and synthetic oligodeoxynucleotides into one-cell embryos. Within 2 d of embryo injection, we created and corrected chocolate missense mutations in the small GTPase RAB38; a regulator of intracellular vesicle trafficking and phenotypic model of Hermansky-Pudlak syndrome. Because ES cell cultures and targeting vectors are not required, this technology enables instant germline modifications, making heterozygous mutants available within 18 wk. The key features of direct mutagenesis by TALENs and oligodeoxynucleotides, minimal effort and high speed, catalyze the generation of future in vivo models for the study of human disease mechanisms and interventions. PMID:23426636

The registration of non-cooperative moving targets laser point cloud in different view point

NASA Astrophysics Data System (ADS)

Wang, Shuai; Sun, Huayan; Guo, Huichao

2018-01-01

Non-cooperative moving target multi-view cloud registration is the key technology of 3D reconstruction of laser threedimension imaging. The main problem is that the density changes greatly and noise exists under different acquisition conditions of point cloud. In this paper, firstly, the feature descriptor is used to find the most similar point cloud, and then based on the registration algorithm of region segmentation, the geometric structure of the point is extracted by the geometric similarity between point and point, The point cloud is divided into regions based on spectral clustering, feature descriptors are created for each region, searching to find the most similar regions in the most similar point of view cloud, and then aligning the pair of point clouds by aligning their minimum bounding boxes. Repeat the above steps again until registration of all point clouds is completed. Experiments show that this method is insensitive to the density of point clouds and performs well on the noise of laser three-dimension imaging.

Technology in the Learning Sanctuary.

ERIC Educational Resources Information Center

Williams, Robert L.

1990-01-01

Adult residential programs can use educational technology to (1) create information icons that allow the learner to focus on and distill information; (2) remove barriers of time and space and create a measured reality within the learning sanctuary; and (3) develop open learning systems that are interactive and nonlinear. (SK)

A custom multi-modal sensor suite and data analysis pipeline for aerial field phenotyping

NASA Astrophysics Data System (ADS)

Bartlett, Paul W.; Coblenz, Lauren; Sherwin, Gary; Stambler, Adam; van der Meer, Andries

2017-05-01

Our group has developed a custom, multi-modal sensor suite and data analysis pipeline to phenotype crops in the field using unpiloted aircraft systems (UAS). This approach to high-throughput field phenotyping is part of a research initiative intending to markedly accelerate the breeding process for refined energy sorghum varieties. To date, single rotor and multirotor helicopters, roughly 14 kg in total weight, are being employed to provide sensor coverage over multiple hectaresized fields in tens of minutes. The quick, autonomous operations allow for complete field coverage at consistent plant and lighting conditions, with low operating costs. The sensor suite collects data simultaneously from six sensors and registers it for fusion and analysis. High resolution color imagery targets color and geometric phenotypes, along with lidar measurements. Long-wave infrared imagery targets temperature phenomena and plant stress. Hyperspectral visible and near-infrared imagery targets phenotypes such as biomass and chlorophyll content, as well as novel, predictive spectral signatures. Onboard spectrometers and careful laboratory and in-field calibration techniques aim to increase the physical validity of the sensor data throughout and across growing seasons. Off-line processing of data creates basic products such as image maps and digital elevation models. Derived data products include phenotype charts, statistics, and trends. The outcome of this work is a set of commercially available phenotyping technologies, including sensor suites, a fully integrated phenotyping UAS, and data analysis software. Effort is also underway to transition these technologies to farm management users by way of streamlined, lower cost sensor packages and intuitive software interfaces.

National transportation technology plan

DOT National Transportation Integrated Search

2000-05-01

The National Science and Technology Council (NSTC) Committee on Technology, Subcommittee on Transportation Research and Development (R&D), has created a National Transportation Technology Plan that builds on the initial Technology Plan released in 19...

Enabling Reanalysis Intercomparison with the CREATE-IP and CREATE-V Projects

NASA Astrophysics Data System (ADS)

Carriere, L.; Potter, G. L.; Hertz, J.; Shen, Y.; Britzolakis, G.; Peters, J.; Maxwell, T. P.; Li, J.; Strong, S.; Schnase, J. L.

2016-12-01

NASA Goddard Space Flight Center's Office of Computational and Information Sciences and Technology, the NASA Center for Climate Simulation (NCCS), and the Earth System Grid Federation (ESGF) are working together to build a uniform environment for the comparative study and use of a group of reanalysis datasets of particular importance to the research community. This effort is called the Collaborative REAnalysis Technical Environment (CREATE) and it contains two components: the CREATE-Intercomparison Project (CREATE-IP) and CREATE-V. For CREATE-IP, our target reanalyses include ECMWF ERA-Interim, NASA/GMAO MERRA and MERRA2, NOAA/NCEP CFSR, NOAA/ESRL 20CR and 20CRv2, JMA JRA25, and JRA55. Each dataset is reformatted similarly to the models in the CMIP5 archive. By repackaging the reanalysis data into a common structure and format, it simplifies access, subsetting, and reanalysis comparison. Both monthly average data and a selection of high frequency data (6-hr) relevant to investigations such as the 2016 El Niño are provided. Much of the processing workflow has been automated and new data appear on a regular basis. In collaboration with the CLIVAR Global Synthesis and Observations Panel (GSOP), we are also processing and publishing eight ocean reanalyses, from 1980 to the present. Here, the data are regridded to a common 1° x 1° grid, vertically interpolated to the World Ocean Atlas 09 (WOA09) depths, and an ensemble is generated. CREATE-V is a web based visualization tool that allows the user to simultaneously view four reanalyses to facilitate comparison. The addition of a backend analytics engine, based on UV-CDAT and Scala provides the ability to generate a time series and anomaly for any given location on a map. The system enables scientists to identify data of interest and visualize, subset, and compare data without the need for download large volumes of data for local visualization.

Accelerated Partial Breast Irradiation: What is Dosimetric Effect of Advanced Technology Approaches?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moran, Jean M.; Ben-David, Merav A.; Marsh, Robin B.

2009-09-01

Purpose: The present treatment planning study compared whole breast radiotherapy (WBRT) to accelerated partial breast irradiation (APBI) for different external beam techniques and geometries (e.g., free breathing [FB] and deep inspiration breath hold [DIBH]). Methods and Materials: After approval by our institutional review board, a treatment planning study was performed of 10 patients with left-sided Stage 0-I breast cancer enrolled in a Phase I-II study of APBI using intensity-modulated radiotherapy (IMRT). After lumpectomy, patients underwent planning computed tomography scans during FB and using an active breathing control device at DIBH. For the FB geometry, standard WBRT and three-dimensional conformal radiotherapymore » (3D-CRT) APBI plans were created. For the DIBH geometry with active breathing control, WBRT, 3D-CRT, and IMRT APBI plans were created. Results: All APBI techniques had excellent planning target volume coverage. The maximal planning target volume dose was reduced from 116% of the prescription dose to 108% with the IMRT(DIBH) APBI plan. The maximal heart dose was >30 Gy for the WBRT techniques, 8.2 Gy for 3D-CRT(FB), and <5.0 Gy for 3D-CRT(DIBH) and IMRT(DIBH) techniques. The mean left anterior descending artery dose was significantly reduced from 11.4 Gy with WBRT(FB) to 4.2 with WBRT(DIBH) and <2.0 Gy with all APBI techniques. Conclusion: Although planning target volume coverage was acceptable with all techniques, the plans using the DIBH geometry resulted in a marked reduction in the normal tissue dose compared with WBRT planned in the absence of cardiac blocking. Additional study is needed to determine whether these techniques result in clinical benefits.« less

Establishment of expanded and streamlined pipeline of PITCh knock-in – a web-based design tool for MMEJ-mediated gene knock-in, PITCh designer, and the variations of PITCh, PITCh-TG and PITCh-KIKO

PubMed Central

Nakamae, Kazuki; Nishimura, Yuki; Takenaga, Mitsumasa; Sakamoto, Naoaki; Ide, Hiroshi; Sakuma, Tetsushi; Yamamoto, Takashi

2017-01-01

ABSTRACT The emerging genome editing technology has enabled the creation of gene knock-in cells easily, efficiently, and rapidly, which has dramatically accelerated research in the field of mammalian functional genomics, including in humans. We recently developed a microhomology-mediated end-joining-based gene knock-in method, termed the PITCh system, and presented various examples of its application. Since the PITCh system only requires very short microhomologies (up to 40 bp) and single-guide RNA target sites on the donor vector, the targeting construct can be rapidly prepared compared with the conventional targeting vector for homologous recombination-based knock-in. Here, we established a streamlined pipeline to design and perform PITCh knock-in to further expand the availability of this method by creating web-based design software, PITCh designer (http://www.mls.sci.hiroshima-u.ac.jp/smg/PITChdesigner/index.html), as well as presenting an experimental example of versatile gene cassette knock-in. PITCh designer can automatically design not only the appropriate microhomologies but also the primers to construct locus-specific donor vectors for PITCh knock-in. By using our newly established pipeline, a reporter cell line for monitoring endogenous gene expression, and transgenesis (TG) or knock-in/knockout (KIKO) cell line can be produced systematically. Using these new variations of PITCh, an exogenous promoter-driven gene cassette expressing fluorescent protein gene and drug resistance gene can be integrated into a safe harbor or a specific gene locus to create transgenic reporter cells (PITCh-TG) or knockout cells with reporter knock-in (PITCh-KIKO), respectively. PMID:28453368

Establishment of expanded and streamlined pipeline of PITCh knock-in - a web-based design tool for MMEJ-mediated gene knock-in, PITCh designer, and the variations of PITCh, PITCh-TG and PITCh-KIKO.

PubMed

Nakamae, Kazuki; Nishimura, Yuki; Takenaga, Mitsumasa; Nakade, Shota; Sakamoto, Naoaki; Ide, Hiroshi; Sakuma, Tetsushi; Yamamoto, Takashi

2017-05-04

The emerging genome editing technology has enabled the creation of gene knock-in cells easily, efficiently, and rapidly, which has dramatically accelerated research in the field of mammalian functional genomics, including in humans. We recently developed a microhomology-mediated end-joining-based gene knock-in method, termed the PITCh system, and presented various examples of its application. Since the PITCh system only requires very short microhomologies (up to 40 bp) and single-guide RNA target sites on the donor vector, the targeting construct can be rapidly prepared compared with the conventional targeting vector for homologous recombination-based knock-in. Here, we established a streamlined pipeline to design and perform PITCh knock-in to further expand the availability of this method by creating web-based design software, PITCh designer ( http://www.mls.sci.hiroshima-u.ac.jp/smg/PITChdesigner/index.html ), as well as presenting an experimental example of versatile gene cassette knock-in. PITCh designer can automatically design not only the appropriate microhomologies but also the primers to construct locus-specific donor vectors for PITCh knock-in. By using our newly established pipeline, a reporter cell line for monitoring endogenous gene expression, and transgenesis (TG) or knock-in/knockout (KIKO) cell line can be produced systematically. Using these new variations of PITCh, an exogenous promoter-driven gene cassette expressing fluorescent protein gene and drug resistance gene can be integrated into a safe harbor or a specific gene locus to create transgenic reporter cells (PITCh-TG) or knockout cells with reporter knock-in (PITCh-KIKO), respectively.

Evaluation of additional biogeochemical impacts on mitigation pathways in an energy sytem integrated assessment model.

NASA Astrophysics Data System (ADS)

Dessens, O.

2017-12-01

Within the last IPCC AR5 a large and systematic sensitivity study around available technologies and timing of policies applied in IAMs to achieve the 2°C target has been conducted. However the simple climate representations included in IAMs are generally tuned to the results of ensemble means. This may result in hiding within the ensemble mean results possible challenging mitigation pathways for the economy or the technology future scenarios. This work provides new insights on the sensitivity of the socio-economic response to different climate factors under a 2°C climate change target in order to help guide future efforts to reduce uncertainty in the climate mitigation decisions. The main objective is to understand and bring new insights on how future global warming will affect the natural biochemical feedbacks on the climate system and what could be the consequences of these feedbacks on the anthropogenic emission pathways with a specific focus on the energy-economy system. It specifically focuses on three issues of the climate representation affecting the energy system transformation and GHG emissions pathways: 1- Impacts of the climate sensitivity (or TCR); 2- Impacts of warming on the radiative forcing (cloudiness,...); 3- Impacts of warming on the carbon cycle (carbon cycle feedback). We use the integrated assessment model TIAM-UCL to examine the mitigation pathways compatible with the 2C target depending on assumptions regarding the 3 issues of the climate representation introduced above. The following key conclusions drawn from this study are that mitigation to 2°C is still possible under strong climate sensitivity (TCR), strong carbon cycle amplification or positive radiative forcing feedback. However, this level of climate mitigation will require a significant transformation in the way we produce and consume energy. Carbon capture and sequestration on electricity generation, industry and biomass is part of the technology pool needed to achieve this level of decarbonisation. In extreme condition (positive correlation between the 3 issues discussed) the integrated assessment model TIAM-UCL creates pathways requiring additional negative emission technologies at the end of this century to keep temperature change well below 2°C.

SAMURAI: Polar AUV-Based Autonomous Dexterous Sampling

NASA Astrophysics Data System (ADS)

Akin, D. L.; Roberts, B. J.; Smith, W.; Roderick, S.; Reves-Sohn, R.; Singh, H.

2006-12-01

While autonomous undersea vehicles are increasingly being used for surveying and mapping missions, as of yet there has been little concerted effort to create a system capable of performing physical sampling or other manipulation of the local environment. This type of activity has typically been performed under teleoperated control from ROVs, which provides high-bandwidth real-time human direction of the manipulation activities. Manipulation from an AUV will require a completely autonomous sampling system, which implies both advanced technologies such as machine vision and autonomous target designation, but also dexterous robot manipulators to perform the actual sampling without human intervention. As part of the NASA Astrobiology Science and Technology for Exploring the Planets (ASTEP) program, the University of Maryland Space Systems Laboratory has been adapting and extending robotics technologies developed for spacecraft assembly and maintenance to the problem of autonomous sampling of biologicals and soil samples around hydrothermal vents. The Sub-polar ice Advanced Manipulator for Universal Sampling and Autonomous Intervention (SAMURAI) system is comprised of a 6000-meter capable six-degree-of-freedom dexterous manipulator, along with an autonomous vision system, multi-level control system, and sampling end effectors and storage mechanisms to allow collection of samples from vent fields. SAMURAI will be integrated onto the Woods Hole Oceanographic Institute (WHOI) Jaguar AUV, and used in Arctic during the fall of 2007 for autonomous vent field sampling on the Gakkel Ridge. Under the current operations concept, the JAGUAR and PUMA AUVs will survey the water column and localize on hydrothermal vents. Early mapping missions will create photomosaics of the vents and local surroundings, allowing scientists on the mission to designate desirable sampling targets. Based on physical characteristics such as size, shape, and coloration, the targets will be loaded into the SAMURAI control system, and JAGUAR (with SAMURAI mounted to the lower forward hull) will return to the designated target areas. Once on site, vehicle control will be turned over to the SAMURAI controller, which will perform vision-based guidance to the sampling site and will then ground the AUV to the sea bottom for stability. The SAMURAI manipulator will collect samples, such as sessile biologicals, geological samples, and (potentially) vent fluids, and store the samples for the return trip. After several hours of sampling operations on one or several sites, JAGUAR control will be returned to the WHOI onboard controller for the return to the support ship. (Operational details of AUV operations on the Gakkel Ridge mission are presented in other papers at this conference.) Between sorties, SAMURAI end effectors can be changed out on the surface for specific targets, such as push cores or larger biologicals such as tube worms. In addition to the obvious challenges in autonomous vision-based manipulator control from a free-flying support vehicle, significant development challenges have been the design of a highly capable robotic arm within the mass limitations (both wet and dry) of the JAGUAR vehicle, the development of a highly robust manipulator with modular maintenance units for extended polar operations, and the creation of a robot-based sample collection and holding system for multiple heterogeneous samples on a single extended sortie.

Federal Technology Transfer Act Success Stories

EPA Pesticide Factsheets

Successful Federal Technology Transfer Act (FTTA) partnerships demonstrate the many advantages of technology transfer and collaboration. EPA and partner organizations create valuable and applicable technologies for the marketplace.

Advances in Front-end Enabling Technologies for Thermal Infrared ` THz Torch' Wireless Communications

NASA Astrophysics Data System (ADS)

Hu, Fangjing; Lucyszyn, Stepan

2016-09-01

The thermal (emitted) infrared frequency bands (typically 20-40 and 60-100 THz) are best known for remote sensing applications that include temperature measurement (e.g. non-contacting thermometers and thermography), night vision and surveillance (e.g. ubiquitous motion sensing and target acquisition). This unregulated part of the electromagnetic spectrum also offers commercial opportunities for the development of short-range secure communications. The ` THz Torch' concept, which fundamentally exploits engineered blackbody radiation by partitioning thermally generated spectral radiance into pre-defined frequency channels, was recently demonstrated by the authors. The thermal radiation within each channel can be independently pulse-modulated, transmitted and detected, to create a robust form of short-range secure communications within the thermal infrared. In this paper, recent progress in the front-end enabling technologies associated with the THz Torch concept is reported. Fundamental limitations of this technology are discussed; possible engineering solutions for further improving the performance of such thermal-based wireless links are proposed and verified either experimentally or through numerical simulations. By exploring a raft of enabling technologies, significant enhancements to both data rate and transmission range can be expected. With good engineering solutions, the THz Torch concept can exploit nineteenth century physics with twentieth century multiplexing schemes for low-cost twenty-first century ubiquitous applications in security and defence.

Neurotechnology for monitoring and restoring sensory, motor, and autonomic functions

NASA Astrophysics Data System (ADS)

Wu, Pae C.; Knaack, Gretchen; Weber, Douglas J.

2016-05-01

The rapid and exponential advances in micro- and nanotechnologies over the last decade have enabled devices that communicate directly with the nervous system to measure and influence neural activity. Many of the earliest implementations focused on restoration of sensory and motor function, but as knowledge of physiology advances and technology continues to improve in accuracy, precision, and safety, new modes of engaging with the autonomic system herald an era of health restoration that may augment or replace many conventional pharmacotherapies. DARPA's Biological Technologies Office is continuing to advance neurotechnology by investing in neural interface technologies that are effective, reliable, and safe for long-term use in humans. DARPA's Hand Proprioception and Touch Interfaces (HAPTIX) program is creating a fully implantable system that interfaces with peripheral nerves in amputees to enable natural control and sensation for prosthetic limbs. Beyond standard electrode implementations, the Electrical Prescriptions (ElectRx) program is investing in innovative approaches to minimally or non-invasively interface with the peripheral nervous system using novel magnetic, optogenetic, and ultrasound-based technologies. These new mechanisms of interrogating and stimulating the peripheral nervous system are driving towards unparalleled spatiotemporal resolution, specificity and targeting, and noninvasiveness to enable chronic, human-use applications in closed-loop neuromodulation for the treatment of disease.

Technology to enhance physical rehabilitation of critically ill patients.

PubMed

Needham, Dale M; Truong, Alex D; Fan, Eddy

2009-10-01

Neuromuscular complications after critical illness are common and can be severe and persistent. To ameliorate complications, there is growing interest in starting physical medicine and rehabilitation therapy immediately after physiologic stabilization. The introduction of physical medicine and rehabilitation-related technology into the intensive care unit may help facilitate delivery of this therapy. Neuromuscular electrical stimulation therapy creates passive contraction of muscles through low-voltage electrical impulses delivered through skin electrodes placed over target muscles. Although neuromuscular electrical stimulation has not been studied in patients with acute critical illness, published guidelines based on available evidence suggest that neuromuscular electrical stimulation may be considered in intensive care unit patients who are at high risk of developing muscle weakness. Bedside cycle ergometry can provide range of motion and muscle strength training for intensive care unit patients who are either sedated or awake, and may help preserve muscle architecture and improve strength and function. Finally, custom-designed technological aids to assist with ambulating mechanically ventilated patients may reduce the human resource requirements and improve the safety and effectiveness of early mobilization in the intensive care unit. Physical medicine and rehabilitation-related technologies may play an important role in preventing and treating intensive care unit-acquired neuromuscular complications. Future studies are needed to evaluate their efficacy in intensive care unit patients.

Combining Google Earth and GIS mapping technologies in a dengue surveillance system for developing countries

PubMed Central

Chang, Aileen Y; Parrales, Maria E; Jimenez, Javier; Sobieszczyk, Magdalena E; Hammer, Scott M; Copenhaver, David J; Kulkarni, Rajan P

2009-01-01

Background Dengue fever is a mosquito-borne illness that places significant burden on tropical developing countries with unplanned urbanization. A surveillance system using Google Earth and GIS mapping technologies was developed in Nicaragua as a management tool. Methods and Results Satellite imagery of the town of Bluefields, Nicaragua captured from Google Earth was used to create a base-map in ArcGIS 9. Indices of larval infestation, locations of tire dumps, cemeteries, large areas of standing water, etc. that may act as larval development sites, and locations of the homes of dengue cases collected during routine epidemiologic surveying were overlaid onto this map. Visual imagery of the location of dengue cases, larval infestation, and locations of potential larval development sites were used by dengue control specialists to prioritize specific neighborhoods for targeted control interventions. Conclusion This dengue surveillance program allows public health workers in resource-limited settings to accurately identify areas with high indices of mosquito infestation and interpret the spatial relationship of these areas with potential larval development sites such as garbage piles and large pools of standing water. As a result, it is possible to prioritize control strategies and to target interventions to highest risk areas in order to eliminate the likely origin of the mosquito vector. This program is well-suited for resource-limited settings since it utilizes readily available technologies that do not rely on Internet access for daily use and can easily be implemented in many developing countries for very little cost. PMID:19627614

System Development Guidelines From a Review of Motion-Based Technology for People With Dementia or MCI

PubMed Central

Astell, Arlene J.; Czarnuch, Stephen; Dove, Erica

2018-01-01

As the population ages and the number of people living with dementia or mild cognitive impairment (MCI) continues to increase, it is critical to identify creative and innovative ways to support and improve their quality of life. Motion-based technology has shown significant potential for people living with dementia or MCI by providing opportunities for cognitive stimulation, physical activity and participation in meaningful leisure activities, while simultaneously functioning as a useful tool for research and development of interventions. However, many of the current systems created using motion-based technology have not been designed specifically for people with dementia or MCI. Additionally, the usability and accessibility of these systems for these populations has not been thoroughly considered. This paper presents a set of system development guidelines derived from a review of the state of the art of motion-based technologies for people with dementia or MCI. These guidelines highlight three overarching domains of consideration for systems targeting people with dementia or MCI: (i) cognitive, (ii) physical, and (iii) social. We present the guidelines in terms of relevant design and use considerations within these domains and the emergent design themes within each domain. Our hope is that these guidelines will aid in designing motion-based software to meet the needs of people with dementia or MCI such that the potential of these technologies can be realized. PMID:29867610

System Development Guidelines From a Review of Motion-Based Technology for People With Dementia or MCI.

PubMed

Astell, Arlene J; Czarnuch, Stephen; Dove, Erica

2018-01-01

As the population ages and the number of people living with dementia or mild cognitive impairment (MCI) continues to increase, it is critical to identify creative and innovative ways to support and improve their quality of life. Motion-based technology has shown significant potential for people living with dementia or MCI by providing opportunities for cognitive stimulation, physical activity and participation in meaningful leisure activities, while simultaneously functioning as a useful tool for research and development of interventions. However, many of the current systems created using motion-based technology have not been designed specifically for people with dementia or MCI. Additionally, the usability and accessibility of these systems for these populations has not been thoroughly considered. This paper presents a set of system development guidelines derived from a review of the state of the art of motion-based technologies for people with dementia or MCI. These guidelines highlight three overarching domains of consideration for systems targeting people with dementia or MCI: (i) cognitive, (ii) physical, and (iii) social. We present the guidelines in terms of relevant design and use considerations within these domains and the emergent design themes within each domain. Our hope is that these guidelines will aid in designing motion-based software to meet the needs of people with dementia or MCI such that the potential of these technologies can be realized.

A practical review of energy saving technology for ageing populations.

PubMed

Walker, Guy; Taylor, Andrea; Whittet, Craig; Lynn, Craig; Docherty, Catherine; Stephen, Bruce; Owens, Edward; Galloway, Stuart

2017-07-01

Fuel poverty is a critical issue for a globally ageing population. Longer heating/cooling requirements combine with declining incomes to create a problem in need of urgent attention. One solution is to deploy technology to help elderly users feel informed about their energy use, and empowered to take steps to make it more cost effective and efficient. This study subjects a broad cross section of energy monitoring and home automation products to a formal ergonomic analysis. A high level task analysis was used to guide a product walk through, and a toolkit approach was used thereafter to drive out further insights. The findings reveal a number of serious usability issues which prevent these products from successfully accessing an important target demographic and associated energy saving and fuel poverty outcomes. Design principles and examples are distilled from the research to enable practitioners to translate the underlying research into high quality design-engineering solutions. Copyright © 2017 Elsevier Ltd. All rights reserved.

Atrial fibrillation surgery in nonrheumatic mitral valve disease.

PubMed

Gillinov, Marc

2007-12-01

Atrial fibrillation (AF) is present in 30-50% of patients presenting for mitral valve surgery. If left untreated, AF in these patients is associated with increased morbidity and, possibly, increased mortality. Therefore, concomitant management of the arrhythmia is indicated in most mitral valve patients with preexisting AF. The cut-and-sew Cox-Maze III procedure is extremely effective, eliminating AF in 80-95%; however, it has been supplanted by newer operations that rely upon alternate energy sources to create lines of conduction block. Early and midterm results are good with a variety of technologies. Choice of lesion set remains a matter of debate, but success of ablation appears to be enhanced by a biatrial lesion set and exceeds 90% in some series. Targeted areas for improvement in combined mitral valve surgery and AF ablation include acceptance of uniform standards for reporting results, development of improved technology for ablation and intraoperative assessment, and creation of instrumentation that facilitates minimally invasive approaches.

Organ-on-a-Chip Systems: Microengineering to Biomimic Living Systems.

PubMed

Zheng, Fuyin; Fu, Fanfan; Cheng, Yao; Wang, Chunyan; Zhao, Yuanjin; Gu, Zhongze

2016-05-01

"Organ-on-a-chip" systems integrate microengineering, microfluidic technologies, and biomimetic principles to create key aspects of living organs faithfully, including critical microarchitecture, spatiotemporal cell-cell interactions, and extracellular microenvironments. This creative platform and its multiorgan integration recapitulating organ-level structures and functions can bring unprecedented benefits to a diversity of applications, such as developing human in vitro models for healthy or diseased organs, enabling the investigation of fundamental mechanisms in disease etiology and organogenesis, benefiting drug development in toxicity screening and target discovery, and potentially serving as replacements for animal testing. Recent advances in novel designs and examples for developing organ-on-a-chip platforms are reviewed. The potential for using this emerging technology in understanding human physiology including mechanical, chemical, and electrical signals with precise spatiotemporal controls are discussed. The current challenges and future directions that need to be pursued for these proof-of-concept studies are also be highlighted. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A Method for Co-Designing Theory-Based Behaviour Change Systems for Health Promotion.

PubMed

Janols, Rebecka; Lindgren, Helena

2017-01-01

A methodology was defined and developed for designing theory-based behaviour change systems for health promotion that can be tailored to the individual. Theories from two research fields were combined with a participatory action research methodology. Two case studies applying the methodology were conducted. During and between group sessions the participants created material and designs following the behaviour change strategy themes, which were discussed, analysed and transformed into a design of a behaviour change system. Theories in behavioural change and persuasive technology guided the data collection, data analyses, and the design of a behaviour change system. The methodology has strong emphasis on the target group's participation in the design process. The different aspects brought forward related to behaviour change strategies defined in literature on persuasive technology, and the dynamics of these are associated to needs and motivation defined in literature on behaviour change. It was concluded that the methodology aids the integration of theories into a participatory action research design process, and aids the analyses and motivations of design choices.

Design of 3-D Printed Concentric Tube Robots.

PubMed

Morimoto, Tania K; Okamura, Allison M

2016-12-01

Concentric tube surgical robots are minimally invasive devices with the advantages of snake-like reconfigurability, long and thin form factor, and placement of actuation outside the patient's body. These robots can also be designed and manufactured to acquire targets in specific patients for treating specific diseases in a manner that minimizes invasiveness. We propose that concentric tube robots can be manufactured using 3-D printing technology on a patient- and procedure-specific basis. In this paper, we define the design requirements and manufacturing constraints for 3-D printed concentric tube robots and experimentally demonstrate the capabilities of these robots. While numerous 3-D printing technologies and materials can be used to create such robots, one successful example uses selective laser sintering to make an outer tube with a polyether block amide and uses stereolithography to make an inner tube with a polypropylene-like material. This enables a tube pair with precurvatures of 0.0775 and 0.0455 mm -1 , which can withstand strains of 20% and 5.5% for the outer and inner tubes, respectively.

Cybersecurity in healthcare: A narrative review of trends, threats and ways forward.

PubMed

Coventry, Lynne; Branley, Dawn

2018-07-01

Electronic healthcare technology is prevalent around the world and creates huge potential to improve clinical outcomes and transform care delivery. However, there are increasing concerns relating to the security of healthcare data and devices. Increased connectivity to existing computer networks has exposed medical devices to new cybersecurity vulnerabilities. Healthcare is an attractive target for cybercrime for two fundamental reasons: it is a rich source of valuable data and its defences are weak. Cybersecurity breaches include stealing health information and ransomware attacks on hospitals, and could include attacks on implanted medical devices. Breaches can reduce patient trust, cripple health systems and threaten human life. Ultimately, cybersecurity is critical to patient safety, yet has historically been lax. New legislation and regulations are in place to facilitate change. This requires cybersecurity to become an integral part of patient safety. Changes are required to human behaviour, technology and processes as part of a holistic solution. Copyright © 2018 Elsevier B.V. All rights reserved.

First Universities Allied for Essential Medicines (UAEM) Neglected Diseases and Innovation Symposium

PubMed Central

Musselwhite, Laura W.; Maciag, Karolina; Lankowski, Alex; Gretes, Michael C.; Wellems, Thomas E.; Tavera, Gloria; Goulding, Rebecca E.; Guillen, Ethan

2012-01-01

Universities Allied for Essential Medicines organized its first Neglected Diseases and Innovation Symposium to address expanding roles of public sector research institutions in innovation in research and development of biomedical technologies for treatment of diseases, particularly neglected tropical diseases. Universities and other public research institutions are increasingly integrated into the pharmaceutical innovation system. Academic entities now routinely undertake robust high-throughput screening and medicinal chemistry research programs to identify lead compounds for small molecule drugs and novel drug targets. Furthermore, product development partnerships are emerging between academic institutions, non-profit entities, and biotechnology and pharmaceutical companies to create diagnostics, therapies, and vaccines for diseases of the poor. With not for profit mission statements, open access publishing standards, open source platforms for data sharing and collaboration, and a shift in focus to more translational research, universities and other public research institutions are well-placed to accelerate development of medical technologies, particularly for neglected tropical diseases. PMID:22232453

Diffusing Supply Chain Innovations at Hewlett-Packard Company: Applications of Performance Technology.

ERIC Educational Resources Information Center

Cargille, Brian; Branvold, Dwight

2000-01-01

Explains how Hewlett-Packard creates supply chain management innovations and effectively diffuses new technologies. Outlines how performance technologists help accelerate the diffusion and adoption of innovations by modifying innovations, define the client adoption path, create resources to lead clients through adoption, and improve the diffusion…

Learning through Creating Robotic Models of Biological Systems

ERIC Educational Resources Information Center

Cuperman, Dan; Verner, Igor M.

2013-01-01

This paper considers an approach to studying issues in technology and science, which integrates design and inquiry activities towards creating and exploring technological models of scientific phenomena. We implemented this approach in a context where the learner inquires into a biological phenomenon and develops its representation in the form of a…

A Requirements-Driven Optimization Method for Acoustic Treatment Design

NASA Technical Reports Server (NTRS)

Berton, Jeffrey J.

2016-01-01

Acoustic treatment designers have long been able to target specific noise sources inside turbofan engines. Facesheet porosity and cavity depth are key design variables of perforate-over-honeycomb liners that determine levels of noise suppression as well as the frequencies at which suppression occurs. Layers of these structures can be combined to create a robust attenuation spectrum that covers a wide range of frequencies. Looking to the future, rapidly-emerging additive manufacturing technologies are enabling new liners with multiple degrees of freedom, and new adaptive liners with variable impedance are showing promise. More than ever, there is greater flexibility and freedom in liner design. Subject to practical considerations, liner design variables may be manipulated to achieve a target attenuation spectrum. But characteristics of the ideal attenuation spectrum can be difficult to know. Many multidisciplinary system effects govern how engine noise sources contribute to community noise. Given a hardwall fan noise source to be suppressed, and using an analytical certification noise model to compute a community noise measure of merit, the optimal attenuation spectrum can be derived using multidisciplinary systems analysis methods. The subject of this paper is an analytical method that derives the ideal target attenuation spectrum that minimizes noise perceived by observers on the ground.

DNA Meter: Energy Tunable, Quantitative Hybridization Assay

PubMed Central

Braunlin, William; Völker, Jens; Plum, G. Eric; Breslauer, Kenneth J.

2015-01-01

We describe a novel hybridization assay that employs a unique class of energy tunable, bulge loop-containing competitor strands (C*) that hybridize to a probe strand (P). Such initial “pre-binding” of a probe strand modulates its effective “availability” for hybridizing to a target site (T). More generally, the assay described here is based on competitive binding equilibria for a common probe strand (P) between such tunable competitor strands (C*) and a target strand (T). We demonstrate that loop variable, energy tunable families of C*P complexes exhibit enhanced discrimination between targets and mismatched targets, thereby reducing false positives/negatives. We refer to a C*P complex between a C* competitor single strand and the probe strand as a “tuning fork,” since the C* strand exhibits branch points (forks) at the duplex-bulge interfaces within the complex. By varying the loop to create families of such “tuning forks,” one can construct C*P “energy ladders” capable of resolving small differences within the target that may be of biological/functional consequence. The methodology further allows quantification of target strand concentrations, a determination heretofore not readily available by conventional hybridization assays. The dual ability of this tunable assay to discriminate and quantitate targets provides the basis for developing a technology we refer to as a “DNA Meter.” Here we present data that establish proof-of-principle for an in solution version of such a DNA Meter. We envision future applications of this tunable assay that incorporate surface bound/spatially resolved DNA arrays to yield enhanced discrimination and sensitivity. PMID:23529692

Health and Wellness Technology Use by Historically Underserved Health Consumers: Systematic Review

PubMed Central

Perchonok, Jennifer

2012-01-01

Background The implementation of health technology is a national priority in the United States and widely discussed in the literature. However, literature about the use of this technology by historically underserved populations is limited. Information on culturally informed health and wellness technology and the use of these technologies to reduce health disparities facing historically underserved populations in the United States is sparse in the literature. Objective To examine ways in which technology is being used by historically underserved populations to decrease health disparities through facilitating or improving health care access and health and wellness outcomes. Methods We conducted a systematic review in four library databases (PubMed, PsycINFO, Web of Science, and Engineering Village) to investigate the use of technology by historically underserved populations. Search strings consisted of three topics (eg, technology, historically underserved populations, and health). Results A total of 424 search phrases applied in the four databases returned 16,108 papers. After review, 125 papers met the selection criteria. Within the selected papers, 30 types of technology, 19 historically underserved groups, and 23 health issues were discussed. Further, almost half of the papers (62 papers) examined the use of technology to create effective and culturally informed interventions or educational tools. Finally, 12 evaluation techniques were used to assess the technology. Conclusions While the reviewed studies show how technology can be used to positively affect the health of historically underserved populations, the technology must be tailored toward the intended population, as personally relevant and contextually situated health technology is more likely than broader technology to create behavior changes. Social media, cell phones, and videotapes are types of technology that should be used more often in the future. Further, culturally informed health information technology should be used more for chronic diseases and disease management, as it is an innovative way to provide holistic care and reminders to otherwise underserved populations. Additionally, design processes should be stated regularly so that best practices can be created. Finally, the evaluation process should be standardized to create a benchmark for culturally informed health information technology. PMID:22652979

Translations on Eastern Europe, Political, Sociological, and Military Affairs, Number 1404-A

DTIC Science & Technology

1977-06-22

Personality Development in Light of Technological Progress (Harry Nick; EINHEIT, Apr 77) 128 Significance of National Culture in Socialism...industrialization in such a way as to create "labor intensive" technologies in the Hungarian regions, preferably those which require low levels of training... technology , as well as the large number of well-paid personnel create excellent con- ditions for the implementation of the plans of the ideological

[Using telemedicine to improve chronic disease monitoring].

PubMed

Lamothe, Lise; Paquette, Marie-Andrée; Fortin, Jean-Paul; Labbé, Françoise; Messikhs, Djamel; Duplantie, Julie

2013-01-01

The purpose of this study was to understand how home telecare technologies can be used to improve services for people with chronic diseases. Canadian elders with at least one of the targeted chronic diseases (COPD, heart failure, hypertension, diabetes) were asked to use telehomecare equipment. The data needed to assess the implementation process and to monitor outcomes were collected through participatory observation, documentary analysis and interviews. The study found that the technology has a number of benefits for patients, particularly in terms of access to health services. By enabling patients to access more information about their health, the use of the technology, combined with an educational program, contributes to increasing their capacity for self-management. The results also indicate that the telehomecare equipment had a positive impact on clinical decision-making. By facilitating health professionals' access to information and expertise, it was found to promote interprofessional practice. The study found that telehomecare technology has an organizational impact on practice and requires organizational adaptation, the form of which will depend on local organizational and clinical settings. The results suggest that telehomecare technology helps to create conditions that need to be met by health care organizations in order to improve service delivery to people with chronic diseases, particularly with regard to interprofessional collaboration, health professionals' access to information and expertise and active patient participation. However, the successful implementation of the technology requires a detailed analysis of the settings in which it is used.

Genome engineering in cattle: recent technological advancements.

PubMed

Wang, Zhongde

2015-02-01

Great strides in technological advancements have been made in the past decade in cattle genome engineering. First, the success of cloning cattle by somatic cell nuclear transfer (SCNT) or chromatin transfer (CT) is a significant advancement that has made obsolete the need for using embryonic stem (ES) cells to conduct cell-mediated genome engineering, whereby site-specific genetic modifications can be conducted in bovine somatic cells via DNA homologous recombination (HR) and whereby genetically engineered cattle can subsequently be produced by animal cloning from the genetically modified cells. With this approach, a chosen bovine genomic locus can be precisely modified in somatic cells, such as to knock out (KO) or knock in (KI) a gene via HR, a gene-targeting strategy that had almost exclusively been used in mouse ES cells. Furthermore, by the creative application of embryonic cloning to rejuvenate somatic cells, cattle genome can be sequentially modified in the same line of somatic cells and complex genetic modifications have been achieved in cattle. Very recently, the development of designer nucleases-such as zinc finger nucleases (ZFNs) and transcription activator-like effector nuclease (TALENs), and clustered regularly interspaced short palindromic repeats/CRISPR-associated protein 9 (CRISPR/Cas9)-has enabled highly efficient and more facile genome engineering in cattle. Most notably, by employing such designer nucleases, genomes can be engineered at single-nucleotide precision; this process is now often referred to as genome or gene editing. The above achievements are a drastic departure from the traditional methods of creating genetically modified cattle, where foreign DNAs are randomly integrated into the animal genome, most often along with the integrations of bacterial or viral DNAs. Here, I review the most recent technological developments in cattle genome engineering by highlighting some of the major achievements in creating genetically engineered cattle for agricultural and biomedical applications.

Energy technologies evaluated against climate targets using a cost and carbon trade-off curve.

PubMed

Trancik, Jessika E; Cross-Call, Daniel

2013-06-18

Over the next few decades, severe cuts in emissions from energy will be required to meet global climate-change mitigation goals. These emission reductions imply a major shift toward low-carbon energy technologies, and the economic cost and technical feasibility of mitigation are therefore highly dependent upon the future performance of energy technologies. However, existing models do not readily translate into quantitative targets against which we can judge the dynamic performance of technologies. Here, we present a simple, new model for evaluating energy-supply technologies and their improvement trajectories against climate-change mitigation goals. We define a target for technology performance in terms of the carbon intensity of energy, consistent with emission reduction goals, and show how the target depends upon energy demand levels. Because the cost of energy determines the level of adoption, we then compare supply technologies to one another and to this target based on their position on a cost and carbon trade-off curve and how the position changes over time. Applying the model to U.S. electricity, we show that the target for carbon intensity will approach zero by midcentury for commonly cited emission reduction goals, even under a high demand-side efficiency scenario. For Chinese electricity, the carbon intensity target is relaxed and less certain because of lesser emission reductions and greater variability in energy demand projections. Examining a century-long database on changes in the cost-carbon space, we find that the magnitude of changes in cost and carbon intensity that are required to meet future performance targets is not unprecedented, providing some evidence that these targets are within engineering reach. The cost and carbon trade-off curve can be used to evaluate the dynamic performance of existing and new technologies against climate-change mitigation goals.

Local Climate and Energy Program Model Design Guide: Enhancing Value and Creating Lasting Programs

EPA Pesticide Factsheets

Created for local climate and clean energy program implementers, learn how programs create and deliver value to target audiences and partners, how to raise revenue, and how they can operate cost effectively.

Gene targeting and cloning in pigs using fetal liver derived cells.

PubMed

Waghmare, Sanjeev K; Estrada, Jose; Reyes, Luz; Li, Ping; Ivary, Bess; Sidner, Richard A; Burlak, Chris; Tector, A Joseph

2011-12-01

Since there are no pig embryonic stem cells, pig genetic engineering is done in fetal fibroblasts that remain totipotent for only 3 to 5 wk. Nuclear donor cells that remain totipotent for longer periods of time would facilitate complicated genetic engineering in pigs. The goal of this study was to test the feasibility of using fetal liver-derived cells (FLDC) to perform gene targeting, and create a genetic knockout pig. FLDC were isolated and processed using a human liver stem cell protocol. Single copy α-1,3-galactosyl transferase knockout (GTKO) FLDCs were created using electroporation and neomycin resistant colonies were screened using PCR. Homozygous GTKO cells were created through loss of heterozygosity mutations in single GTKO FLDCs. Double GTKO FLDCs were used in somatic cell nuclear transfer (SCNT) to create GTKO pigs. FLDCs grew for more than 80 population doublings, maintaining normal karyotype. Gene targeting and loss of heterozygosity mutations produced homozygous GTKO FLDCs. FLDCs used in SCNT gave rise to homozygous GTKO pigs. FDLCs can be used in gene targeting and SCNT to produce genetically modified pigs. The increased life span in culture compared to fetal fibroblasts may facilitate genetic engineering in the pig. Copyright © 2011 Elsevier Inc. All rights reserved.

Additional risk of end-of-the-pipe geoengineering technologies

NASA Astrophysics Data System (ADS)

Bohle, Martin

2014-05-01

Humans are engineers, even the artists who engineer the surface of the globe. Should humans endeavour to engineer the Earth to counter climate change hazards? Striving towards 'global sustainability' will require to adjust the current production and consumption patterns. Contrary to an approach of global sustainability, 'geoengineering' deploys a 'technology fix' for the same purpose. Humans are much inclined to look for technological fixes for problems because well engineered technological methods have created modern societies. Thus, it seems obvious to apply an engineering solution to climate change issues too. In particular, as air pollution causing acid rains has been reduced by cleaner combustion processes or ozone destructing chemical coolants have been replaced by other substances. Common to these approaches was to reduce inputs into global or regional systems by withholding emission, replacing substances or limiting use cases for certain substances. Thus, the selected approach was a technological fix or regulatory measure targeting the 'start of the pipe'. However applying a 'start of the pipe' approach to climate change faces the issue that mankind should reduce inputs were its hurts, namely reducing radically energy that is produced from burning fossil fuels. Capping burning of fossil fuels would be disruptive for the economic structures or the consumption pattern of the developed and developing industrialised societies. Facing that dilemma, affordable geoengineering looks tempting for some. However geoengineering technologies, which counter climate change by other means than carbon capture at combustion, are of a different nature than the technological fixes and negotiated regulatory actions, which so far have been applied to limit threats to regional and global systems. Most of the proposed technologies target other parts of the climate system but the carbon-dioxide input into the atmosphere. Therefore, many geoengineering technologies differ qualitatively from the known successes. They do not tackle the initial cause, namely the carbon-dioxide inputs that are too high. This is their additional specific risk. 'The acceptability of geoengineering will be determined as much by social, legal and political issues as by scientific and technical factors', conclude Adam Corner and Nick Pidgeon (2010) when reviewing social and ethical implications of geoengineering the climate. It is to debate in that context that most geoengineering technologies are 'end of the pipe technologies', what involves an additional specific risk. Should these technologies be part of the toolbox to tackle anthropogenic climate change? Adam Corner and Nick Pidgeon 2010, Geoengineering the climate: The social and ethical implications, Environment Vol. 52.

Software reengineering

NASA Technical Reports Server (NTRS)

Fridge, Ernest M., III

1991-01-01

Today's software systems generally use obsolete technology, are not integrated properly with other software systems, and are difficult and costly to maintain. The discipline of reverse engineering is becoming prominent as organizations try to move their systems up to more modern and maintainable technology in a cost effective manner. JSC created a significant set of tools to develop and maintain FORTRAN and C code during development of the Space Shuttle. This tool set forms the basis for an integrated environment to re-engineer existing code into modern software engineering structures which are then easier and less costly to maintain and which allow a fairly straightforward translation into other target languages. The environment will support these structures and practices even in areas where the language definition and compilers do not enforce good software engineering. The knowledge and data captured using the reverse engineering tools is passed to standard forward engineering tools to redesign or perform major upgrades to software systems in a much more cost effective manner than using older technologies. A beta vision of the environment was released in Mar. 1991. The commercial potential for such re-engineering tools is very great. CASE TRENDS magazine reported it to be the primary concern of over four hundred of the top MIS executives.

[Changing the teaching of neurosurgery with information technology].

PubMed

Moreau, Jean-Jacques; Caire, François; Kalamarides, Michel; Mireau, Etienne; Dauger, Frédéric; Coignac, Marie-Jo; Charlin, Bernard

2009-10-01

A digital campus is a distance learning site that uses the potential of information and communication technologies to disseminate and improve educational services. This website, with open and free access, is built from free software with Web 2.0 technology. It is hosted at the University of Limoges. It functions as a digital library, containing scanned books, slide shows, more than 200 hours of recorded courses and round tables accessible by streaming video. The site is indexed according to the users' needs, by level of knowledge, specialty, keywords, and supplementary MeSH terms. The campus is organized as the College of Neurosurgery (http://college.neurochirurgie.fr). The durability of this type of training (in existence for 9 years now) is made possible by a powerful and committed consortium: the French Society of Neurosurgery, which has created high-quality intellectual and scientific resources, the University of Limoges, the Dupuytren University Hospital Center in Limoges, the region of Limousin, and the French-language Virtual Medical University, which have provided logistic and financial support. To target appropriate levels at various users, we distinguished four groups: medical students, neurosurgery students, neurosurgeons (continuing medical education), and students in allied health fields. All areas of neurosurgery are concerned. All the courses, including tests for self-evaluation and scientific meetings (organized with information and communication technologies) are digitally recorded for the site. The principles that make it possible for a medical discipline to organize around an online project are: a pedagogical conception of projects built in the form of models reusable by other health specialties; a stronghold within professional societies of the relevant specialties able to create high-quality intellectual and scientific resources; an organization by educational levels that can be extended transversally to other health disciplines; and free access to the digital campus, the durability of which depends on the dissemination and dynamism of its consortium.

Examining Engineering & Technology Students' Acceptance of Network Virtualization Technology Using the Technology Acceptance Model

ERIC Educational Resources Information Center

Yousif, Wael K.

2010-01-01

This causal and correlational study was designed to extend the Technology Acceptance Model (TAM) and to test its applicability to Valencia Community College (VCC) Engineering and Technology students as the target user group when investigating the factors influencing their decision to adopt and to utilize VMware as the target technology. In…

The End of Mass Society?: A Preface to Telecommunications Politics.

ERIC Educational Resources Information Center

Triebwasser, Marc A.

This paper suggests that throughout human history technological revolutions have often created the potential for social revolutions as these new ways of doing things were applied to society. Often, it has been these changes in technology, more than ideology, that have created changes in the way human society is organized. The document contends…

A review of an attempt to create shatter cones with magnetic flyer plate technology

NASA Technical Reports Server (NTRS)

Linnerud, H. J.

1981-01-01

The feasibility of creating shatter cones in a controlled laboratory environment is discussed. Magnetic flyer plate technology, which generates high amplitude shock waves in test materials is discribed. Considerable sample shear and break up was observed, however, no shatter cones are found in the tested samples.

The Academy Is Flat: Using Technology to Create Authentic Multicultural Education

ERIC Educational Resources Information Center

Roberts, Gary O.; Monroe-Baillargeon, Ann

2012-01-01

Thomas Freidman (2005) asserts that technology has created a transnational platform for communication, collaboration, and competition that is stimulating global opportunity for all individuals. After years of robust study abroad programs and the recent "bricks and mortar" expansion of U.S. higher education overseas, we are now seeing the true…

A Wiki Collaboration to Create National Guidelines: Tips for Professional Practice

ERIC Educational Resources Information Center

Moser, Patt

2009-01-01

In 2006, technology directors from independent schools across the country had banded together and created "Principles of Good Practice" for technology in independent schools. These principles "define high standards and ethical behavior in key areas of independent school operations" (NAIS 2006). This author decided that it was time for the National…

Leveraging 21st Century Learning & Technology to Create Caring Diverse Classroom Cultures

ERIC Educational Resources Information Center

Tarbutton, Tanya

2018-01-01

Creating diverse caring classroom environments, for all students, using innovative technology, is the impetus of this article. Administrators and teachers in many states have worked to integrate 21st Century Learning Outcomes and Local Control and Accountability Plans (LCAP) into daily teaching and learning. These initiatives are designed to…

Student Adoption & Development of Digital Learning Media: Action Research and Recommended Practices

ERIC Educational Resources Information Center

Tabor, Sharon W.; Minch, Robert P.

2013-01-01

Digital technologies offer many opportunities for creating engaging course content. In this study we captured student perceptions and adoption choices related to creating and using digital media as learning tools. Podcasts, video and other media were integrated in a variety of contexts and tasks in two undergraduate information technology (IT)…

Creating Micro-Videos to Demonstrate Technology Learning

ERIC Educational Resources Information Center

Frydenberg, Mark; Andone, Diana

2016-01-01

Short videos, also known as micro-videos, have emerged as a platform for sharing ideas, experiences, and life events on online social networks. This paper shares preliminary results of a study involving students from two universities who created six-second videos using the Vine mobile app to explain or illustrate technology concepts. An analysis…

How To Create Effective Information and Communication Technology Learning Programmes. A Guide.

ERIC Educational Resources Information Center

Clarke, Alan

This guide, which is intended for information and communication technology (ICT) tutors and tutor managers in Great Britain's further education sector, explains how to create effective ICT learning programs for adults. The guide emphasizes developing students' confidence and providing them with a sound foundation for further study. The following…

Higher Education Technology and Research: Creating Excellence through State Investments

ERIC Educational Resources Information Center

New Jersey Commission on Higher Education, 2004

2004-01-01

Colleges and universities in New Jersey play a critical role in building and sustaining economic prosperity and quality of life in the state and beyond. Through advancements in technology and research, higher education helps to create new jobs, improve the workforce, develop new knowledge, and boost the overall economy. This report summarizes…

The "Day in the Life of a Teenage Hobo" Project: Integrating Technology with Shneiderman's Collect-Relate-Create- Donate Framework

ERIC Educational Resources Information Center

Reich, Justin; Daccord, Thomas

2009-01-01

Used wisely, academic technology empowers students to take responsibility for their own learning. "In Leonardo's Laptop," Ben Shneiderman provides teachers with a powerful framework, "Collect-Relate-Create-Donate" (CRCD), for designing student-centered learning opportunities using computers. Shneiderman developed his model by…

Connexin-Based Therapeutics and Tissue Engineering Approaches to the Amelioration of Chronic Pancreatitis and Type I Diabetes: Construction and Characterization of a Novel Prevascularized Bioartificial Pancreas.

PubMed

Rhett, J Matthew; Wang, Hongjun; Bainbridge, Heather; Song, Lili; Yost, Michael J

2016-01-01

Total pancreatectomy and islet autotransplantation is a cutting-edge technique to treat chronic pancreatitis and postoperative diabetes. A major obstacle has been low islet cell survival due largely to the innate inflammatory response. Connexin43 (Cx43) channels play a key role in early inflammation and have proven to be viable therapeutic targets. Even if cell death due to early inflammation is avoided, insufficient vascularization is a primary obstacle to maintaining the viability of implanted cells. We have invented technologies targeting the inflammatory response and poor vascularization: a Cx43 mimetic peptide that inhibits inflammation and a novel prevascularized tissue engineered construct. We combined these technologies with isolated islets to create a prevascularized bioartificial pancreas that is resistant to the innate inflammatory response. Immunoconfocal microscopy showed that constructs containing islets express insulin and possess a vascular network similar to constructs without islets. Glucose stimulated islet-containing constructs displayed reduced insulin secretion compared to islets alone. However, labeling for insulin post-glucose stimulation revealed that the constructs expressed abundant levels of insulin. This discrepancy was found to be due to the expression of insulin degrading enzyme. These results suggest that the prevascularized bioartificial pancreas is potentially a tool for improving long-term islet cell survival in vivo.

Development of a Heterogenic Distributed Environment for Spatial Data Processing Using Cloud Technologies

NASA Astrophysics Data System (ADS)

Garov, A. S.; Karachevtseva, I. P.; Matveev, E. V.; Zubarev, A. E.; Florinsky, I. V.

2016-06-01

We are developing a unified distributed communication environment for processing of spatial data which integrates web-, desktop- and mobile platforms and combines volunteer computing model and public cloud possibilities. The main idea is to create a flexible working environment for research groups, which may be scaled according to required data volume and computing power, while keeping infrastructure costs at minimum. It is based upon the "single window" principle, which combines data access via geoportal functionality, processing possibilities and communication between researchers. Using an innovative software environment the recently developed planetary information system (http://cartsrv.mexlab.ru/geoportal) will be updated. The new system will provide spatial data processing, analysis and 3D-visualization and will be tested based on freely available Earth remote sensing data as well as Solar system planetary images from various missions. Based on this approach it will be possible to organize the research and representation of results on a new technology level, which provides more possibilities for immediate and direct reuse of research materials, including data, algorithms, methodology, and components. The new software environment is targeted at remote scientific teams, and will provide access to existing spatial distributed information for which we suggest implementation of a user interface as an advanced front-end, e.g., for virtual globe system.

Quantitative analysis of glycerophospholipids by LC-MS: acquisition, data handling, and interpretation

PubMed Central

Myers, David S.; Ivanova, Pavlina T.; Milne, Stephen B.; Brown, H. Alex

2012-01-01

As technology expands what it is possible to accurately measure, so too the challenges faced by modern mass spectrometry applications expand. A high level of accuracy in lipid quantitation across thousands of chemical species simultaneously is demanded. While relative changes in lipid amounts with varying conditions may provide initial insights or point to novel targets, there are many questions that require determination of lipid analyte absolute quantitation. Glycerophospholipids present a significant challenge in this regard, given the headgroup diversity, large number of possible acyl chain combinations, and vast range of ionization efficiency of species. Lipidomic output is being used more often not just for profiling of the masses of species, but also for highly-targeted flux-based measurements which put additional burdens on the quantitation pipeline. These first two challenges bring into sharp focus the need for a robust lipidomics workflow including deisotoping, differentiation from background noise, use of multiple internal standards per lipid class, and the use of a scriptable environment in order to create maximum user flexibility and maintain metadata on the parameters of the data analysis as it occurs. As lipidomics technology develops and delivers more output on a larger number of analytes, so must the sophistication of statistical post-processing also continue to advance. High-dimensional data analysis methods involving clustering, lipid pathway analysis, and false discovery rate limitation are becoming standard practices in a maturing field. PMID:21683157

Flight Avionics Hardware Roadmap

NASA Technical Reports Server (NTRS)

Some, Raphael; Goforth, Monte; Chen, Yuan; Powell, Wes; Paulick, Paul; Vitalpur, Sharada; Buscher, Deborah; Wade, Ray; West, John; Redifer, Matt;

The present and future of nanotechnology in human health care.

PubMed

Sahoo, S K; Parveen, S; Panda, J J

2007-03-01

Nanotechnology is a multidisciplinary field that covers a vast and diverse array of devices derived from engineering, physics, chemistry, and biology. The burgeoning new field of nanotechnology, opened up by rapid advances in science and technology, creates myriad new opportunities for advancing medical science and disease treatment in human health care. Applications of nanotechnology to medicine and physiology imply materials and devices designed to interact with the body at subcellular (i.e., molecular) scales with a high degree of specificity. This can be potentially translated into targeted cellular and tissue-specific clinical applications designed to achieve maximal therapeutic efficacy with minimal side effects. In this review the chief scientific and technical aspects of nanotechnology are introduced, and some of its potential clinical applications are discussed.

Promoting public health research in BRICS through a multinational public health prize fund.

PubMed

Campbell, Michael

2014-01-01

This article proposes the establishment of a prize fund to incentivise public health research within the BRICS association, which comprises the five major emerging world economies: Brazil, Russia, India, China and South Africa. This would stimulate cooperative healthcare research within the group and, on the proviso that the benefits of the research are made freely available within the association, would be rewarding for researchers. The results of the research stimulated by the prize would provide beneficial new healthcare technologies, targeting the most vulnerable and needy groups. The proposed fund is consistent with current international patent law and would not only avoid some of the problems associated with the "Health Impact Fund", but also create a new model for healthcare research.

Advanced Exploration Systems Logistics Reduction and Repurposing Trash-to-Gas and Heat Melt Compactor KSC

NASA Technical Reports Server (NTRS)

Caraccio, Anne J.; Layne, Andrew; Hummerick, Mary

2013-01-01

Topics covered: 1. Project Structure 2. "Trash to Gas" 3. "Smashing Trash! The Heat Melt Compactor" 4. "Heat Melt Compaction as an Effective Treatment for Eliminating Microorganisms from Solid Waste" Thermal degradation of trash reduces volume while creating water, carbon dioxide and ash. CO2 can be fed to Sabatier reactor for CH4 production to fuel LOX/LCH4 ascent vehicle. Optimal performance: HFWS, full temperature ramp to 500-600 C. Tar challenges exist. Catalysis: Dolomag did eliminate allene byproducts from the product stream. 2nd Gen Reactor Studies. Targeting power, mass, time efficiency. Gas separation, Catalysis to reduce tar formation. Microgravity effects. Downselect in August will determine where we should spend time optimizing the technology.

Genetic technologies and ethics.

PubMed

Ardekani, Ali M

2009-01-01

In the past decade, the human genome has been completely sequenced and the knowledge from it has begun to influence the fields of biological and social sciences in fundamental ways. Identification of about 25000 genes in the human genome is expected to create great benefits in diagnosis and treatment of diseases in the coming years. However, Genetic technologies have also created many interesting and difficult ethical issues which can affect the human societies now and in the future. Application of genetic technologies in the areas of stem cells, cloning, gene therapy, genetic manipulation, gene selection, sex selection and preimplantation diagnosis has created a great potential for the human race to influence and change human life on earth as we know it today. Therefore, it is important for leaders of societies in the modern world to pay attention to the advances in genetic technologies and prepare themselves and those institutions under their command to face the challenges which these new technologies induce in the areas of ethics, law and social policies.

Supply Chain Sustainability Analysis of Whole Algae Hydrothermal Liquefaction and Upgrading

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pegallapati, Ambica Koushik; Dunn, Jennifer B.; Frank, Edward D.

2015-04-01

The Department of Energy's Bioenergy Technology Office (BETO) collaborates with a wide range of institutions towards the development and deployment of biofuels and bioproducts. To facilitate this effort, BETO and its partner national laboratories develop detailed techno-economic assessments (TEA) of biofuel production technologies as part of the development of design cases and state of technology (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand,more » an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available. (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand, an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available. (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand, an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available.« less

The impact of podcasts, screencasts, and vodcasts on student achievement in the science classroom

NASA Astrophysics Data System (ADS)

Pena, Ruben, Jr.

Educators in today's society are in search for different ways to reach their students in order to keep them engaged and active in the learning process. There are several strategies that teachers have utilized in the classroom in order to reach all students. Now seen more in the classroom is the use of technology in one form or another. There are several types of technologies that one may employ while in the classroom, but seen more recently is the use of podcasts, screencasts, and vodcasts. The major purpose of the study was to investigate the impact of using podcasts, screencasts, and vodcasts in conjunction with science curriculum on student academic achievement. Two intermediate schools from the south Texas region were chosen as a convenience sample for the study because one school utilized the technology of podcasts, screencasts, and vodcasts at the student created level while the other school did not utilize podcasts, screencasts, and vodcasts at the student created level. The researcher collected scores from curriculum based assessments that were aligned with the Texas Essential Knowledge and Skills (TEKS) for comparison between the two different groups, while controlling grade five science TAKS scores for group equalization. Once all data was collected, scores were entered into the Statistical Package for the Social Sciences (SPSS) and were analyzed using an analysis of covariance. The ANCOVA allowed the researcher to see that differences among curriculum based assessments scores existed between the two different schools. Scores were higher for the students who utilized podcasts, screencasts, and vodcasts at the student created level when compared to those scores for students who did not utilize podcasts, screencasts, and vodcasts at the student created level. This study showed the benefits reaped of having students create their own podcasts, screencasts, and vodcasts. Having students create their own technology has them actively engaged in the learning process and this is the goal of every educator. Looking at this notion shows that having students create their own technology projects, any type of technology, enhances academic achievement which is expected in today's classroom.

Lithographic Printing Via Two-Photon Polymerization of Engineered Foams

DOE PAGES

Herman, Matthew J.; Peterson, Dominic; Henderson, Kevin; ...

2017-11-29

Understanding deuterium-tritium mix in capsules is critical to achieving fusion within inertial confined fusion experiments. One method of understanding how the mix of hydrogen fuels can be controlled is by creating various structured deuterated foams and filling the capsule with liquid tritium. Historically, these materials have been a stochastically structured gas-blown foam. Later, to improve the uniformity of this material, pore formers have been used which are then chemically removed, leaving behind a foam of monodisperse voids. However, this technique is still imperfect in that fragments of the pore templating particles may not be completely removed and the void distributionmore » may not be uniform over the size scale of the capsule. Recently, advances in three-dimensional printing suggest that it can be used to create microlattices and capsule walls in one single print. Demonstrated in this paper are proof-of-concept microlattices produced using two-photon polymerization with submicrometer resolution of various structures as well as a microlattice-containing capsule. Finally, with this technology, complete control of the mixing structure is possible, amenable to modeling and easily modified for tailored target design.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herman, Matthew J.; Peterson, Dominic; Henderson, Kevin

Understanding deuterium-tritium mix in capsules is critical to achieving fusion within inertial confined fusion experiments. One method of understanding how the mix of hydrogen fuels can be controlled is by creating various structured deuterated foams and filling the capsule with liquid tritium. Historically, these materials have been a stochastically structured gas-blown foam. Later, to improve the uniformity of this material, pore formers have been used which are then chemically removed, leaving behind a foam of monodisperse voids. However, this technique is still imperfect in that fragments of the pore templating particles may not be completely removed and the void distributionmore » may not be uniform over the size scale of the capsule. Recently, advances in three-dimensional printing suggest that it can be used to create microlattices and capsule walls in one single print. Demonstrated in this paper are proof-of-concept microlattices produced using two-photon polymerization with submicrometer resolution of various structures as well as a microlattice-containing capsule. Finally, with this technology, complete control of the mixing structure is possible, amenable to modeling and easily modified for tailored target design.« less

Technology CAD for integrated circuit fabrication technology development and technology transfer

NASA Astrophysics Data System (ADS)

Saha, Samar

2003-07-01

In this paper systematic simulation-based methodologies for integrated circuit (IC) manufacturing technology development and technology transfer are presented. In technology development, technology computer-aided design (TCAD) tools are used to optimize the device and process parameters to develop a new generation of IC manufacturing technology by reverse engineering from the target product specifications. While in technology transfer to manufacturing co-location, TCAD is used for process centering with respect to high-volume manufacturing equipment of the target manufacturing equipment of the target manufacturing facility. A quantitative model is developed to demonstrate the potential benefits of the simulation-based methodology in reducing the cycle time and cost of typical technology development and technology transfer projects over the traditional practices. The strategy for predictive simulation to improve the effectiveness of a TCAD-based project, is also discussed.

An Introduction to Flight Software Development: FSW Today, FSW 2010

NASA Technical Reports Server (NTRS)

Gouvela, John

2004-01-01

Experience and knowledge gained from ongoing maintenance of Space Shuttle Flight Software and new development projects including Cockpit Avionics Upgrade are applied to projected needs of the National Space Exploration Vision through Spiral 2. Lessons learned from these current activities are applied to create a sustainable, reliable model for development of critical software to support Project Constellation. This presentation introduces the technologies, methodologies, and infrastructure needed to produce and sustain high quality software. It will propose what is needed to support a Vision for Space Exploration that places demands on the innovation and productivity needed to support future space exploration. The technologies in use today within FSW development include tools that provide requirements tracking, integrated change management, modeling and simulation software. Specific challenges that have been met include the introduction and integration of Commercial Off the Shelf (COTS) Real Time Operating System for critical functions. Though technology prediction has proved to be imprecise, Project Constellation requirements will need continued integration of new technology with evolving methodologies and changing project infrastructure. Targets for continued technology investment are integrated health monitoring and management, self healing software, standard payload interfaces, autonomous operation, and improvements in training. Emulation of the target hardware will also allow significant streamlining of development and testing. The methodologies in use today for FSW development are object oriented UML design, iterative development using independent components, as well as rapid prototyping . In addition, Lean Six Sigma and CMMI play a critical role in the quality and efficiency of the workforce processes. Over the next six years, we expect these methodologies to merge with other improvements into a consolidated office culture with all processes being guided by automated office assistants. The infrastructure in use today includes strict software development and configuration management procedures, including strong control of resource management and critical skills coverage. This will evolve to a fully integrated staff organization with efficient and effective communication throughout all levels guided by a Mission-Systems Architecture framework with focus on risk management and attention toward inevitable product obsolescence. This infrastructure of computing equipment, software and processes will itself be subject to technological change and need for management of change and improvement,

National Transportation Science and Technology Strategy.

DOT National Transportation Integrated Search

1999-04-01

The National Science and Technology Council (NSTC) Committee on Technology, Subcommittee on Transportation Research and Development (R&D), has created a National Transportation Science and Technology Strategy that builds on the earlier strategy publi...

Guidance of magnetic space tug

NASA Astrophysics Data System (ADS)

Fabacher, Emilien; Lizy-Destrez, Stéphanie; Alazard, Daniel; Ankersen, Finn; Profizi, Alexandre

2017-07-01

Magnetic tugging of a target satellite without thrust capacity can be interesting in various contexts, as for example End-Of-Life management, or to complete launchers capabilities. The aim is to gradually modify the orbit of the target by constantly exerting on it a magnetic force. To do so, the chaser is assumed equipped with a steerable magnetic dipole, able to create both forces and torques on the magnetic torque rods carried by the target. The chaser is also supposed to carry electric thrusters, creating a continuous force which modifies the orbit of the whole formation composed of chaser and target. The relative motions of both satellites are derived, in order to assess the feasibility of such a concept. Relative configuration (attitudes and position) trajectories are derived, which are compliant with the dynamics, and enable the chaser to tug the target. Considering targets in Low Earth Orbit (LEO), the magnetic field of the Earth is taken into account, modeled by the International Geomagnetic Reference Field (IGRF). The position of the magnetic torque rod of the target may not be located at its center of mass. This lever-arm is taken into account in the dynamics. As for every Electro-Magnetic Formation Flight concept developed in the literature, satellites involved in magnetic tugging are constantly subjected to torques, created by the Earth magnetic field and by the magnetic fields created by the other satellites in the formation. In this study, the solution chosen to face this problem is to take into account the attitude equilibrium of the satellites early in the guidance phase, in order to avoid having to wave the dipole, as it is generally done. Promising results are presented for different types of orbit, showing that the concept could be feasible in many different scenarios.

The Design and Characterization of Multifunctional Aptamer Nanopore Sensors.

PubMed

Mayne, Laura; Lin, Chih-Yuan; Christie, Steven D R; Siwy, Zuzanna S; Platt, Mark

2018-05-22

Aptamer-modified nanomaterials provide a simple, yet powerful sensing platform when combined with resistive pulse sensing technologies. Aptamers adopt a more stable tertiary structure in the presence of a target analyte, which results in a change in charge density and velocity of the carrier particle. In practice the tertiary structure is specific for each aptamer and target, and the strength of the signal varies with different applications and experimental conditions. Resistive pulse sensors (RPS) have single particle resolution, allowing for the detailed characterization of the sample. Measuring the velocity of aptamer-modified nanomaterials as they traverse the RPS provides information on their charge state and densities. To help understand how the aptamer structure and charge density effects the sensitivity of aptamer-RPS assays, here we study two metal binding aptamers. This creates a sensor for mercury and lead ions that is capable of being run in a range of electrolyte concentrations, equivalent to river to seawater conditions. The observed results are in excellent agreement with our proposed model. Building on this we combine two aptamers together in an attempt to form a dual sensing strand of DNA for the simultaneous detection of two metal ions. We show experimental and theoretical responses for the aptamer which creates layers of differing charge densities around the nanomaterial. The density and diameter of these zones effects both the viability and sensitivity of the assay. While this approach allows the interrogation of the DNA structure, the data also highlight the limitations and considerations for future assays.

Managing virtual machines with Vac and Vcycle

NASA Astrophysics Data System (ADS)

McNab, A.; Love, P.; MacMahon, E.

2015-12-01

We compare the Vac and Vcycle virtual machine lifecycle managers and our experiences in providing production job execution services for ATLAS, CMS, LHCb, and the GridPP VO at sites in the UK, France and at CERN. In both the Vac and Vcycle systems, the virtual machines are created outside of the experiment's job submission and pilot framework. In the case of Vac, a daemon runs on each physical host which manages a pool of virtual machines on that host, and a peer-to-peer UDP protocol is used to achieve the desired target shares between experiments across the site. In the case of Vcycle, a daemon manages a pool of virtual machines on an Infrastructure-as-a-Service cloud system such as OpenStack, and has within itself enough information to create the types of virtual machines to achieve the desired target shares. Both systems allow unused shares for one experiment to temporarily taken up by other experiements with work to be done. The virtual machine lifecycle is managed with a minimum of information, gathered from the virtual machine creation mechanism (such as libvirt or OpenStack) and using the proposed Machine/Job Features API from WLCG. We demonstrate that the same virtual machine designs can be used to run production jobs on Vac and Vcycle/OpenStack sites for ATLAS, CMS, LHCb, and GridPP, and that these technologies allow sites to be operated in a reliable and robust way.

Elaboration and Evaluation of Contents about Hearing Health Inserted in Cybertutor.

PubMed

Corrêa, Camila de Castro; Silva, Ricelly Avila da; Blasca, Wanderléia Quinhoneiro

2014-04-01

Introduction Cybertutor (electronic tutor) is a type of information and communication technology to disseminate knowledge about hearing, aiming at the prevention of hearing alterations and, when needed, early treatment, in addition to social inclusion of the hearing impaired. However, it is important to evaluate the level of language used in the content and the subjective perception of the target public regarding improvements of the tool. Objective To improve content about hearing health inserted in a cybertutor and to evaluate the level of legibility and the quality of the content and material made available. Method For the construction of the content, text and audiovisual resources were used, based on scientific publications, and were evaluated objectively with Flesch Reading Ease test and subjectively with a questionnaire created by the authors and answered by 10 ninth-year pupils. Results Two modules on hearing health were created, "Hearing Health" and "Intervention and Rehabilitation," which received Flesch scores of 50.8 and 51.4%, respectively, making it necessary to have a sixth- to ninth-year education to understand the material. The students' evaluation in reference to language and material showed that 55.5% considered the contents excellent; 38.2% classified the contents as satisfactory; 6.3% considered them reasonable; and 0% classified them as unsatisfactory. Conclusion The contents inserted in the cybertutor about hearing health presented a language level considered easy for the age group of the target population, in addition to receiving good subjective evaluation from the pupils, facilitating access to the information.

Final Scientific Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hayes, Adam; Mayton, Mark; Rolland, Jannick

2016-03-29

Project 1: We have created a 3D optical research and design software platform for simulation and optimization, geared toward asymmetric, folded optical systems and new, enabling freeform surfaces. The software, Eikonal+, targets both institutional researchers and leading optical surface fabricators. With a modular design and the source code available to the development team at the University of Rochester, custom modules can be created for specific research interests and is accelerating the work on freeform optics currently being carried out at the Institute of Optics. With a research-based optical design environment, the fabrication, assembly, and testing industries can anticipate, innovate, andmore » retool for the future of optical systems. Targeted proposals for science and innovation in freeform optics spanning design to fabrication, assembly, and testing can proceed with a level of technical transparency that has been unachievable in this field since the 1960’s, when optics design code was commercialized and became unavailable to the research community for competitive reasons. Project 2: The University of Rochester Laboratory for Laser Energetics (LLE) with personnel from Flint Creek Resources (FCR) collaborated to develop technologies for the reclamation and reuse of cerium oxide based slurries intended for the polishing of optical components. The pilot process was evaluated and modifications were made to improve the collection of spent glass polish, to improve the efficiency and capacity of the recycling equipment, and to expand the customer base. A portable, self-contained system was developed and fabricated to recycle glass polishing compounds where the spent materials are produced.« less

The National Network forTechnology Entrepreneurship and Commercialization (N2TEC): Bringing New Technologies to Market

NASA Astrophysics Data System (ADS)

Allen, Kathleen

2003-03-01

N2TEC, the National Network for Technology Entrepreneurship and Commercialization, is a National Science Foundation "Partnerships for Innovation" initiative designed to raise the level of innovation and technology commercialization in colleges, universities, and communities across the nation. N2TEC is creating a network of people and institutions, and a set of technology tools that will facilitate the pooling of resources and knowledge and enable faculty and students to share those resources and collaborate without regard to geographic boundaries. N2TEC will become the backbone by which educational institutions across the nation can move their technologies into new venture startups. The ultimate goal is to create new wealth and strengthen local, regional and national economies.

Robotic surgery update.

PubMed

Jacobsen, G; Elli, F; Horgan, S

2004-08-01

Minimally invasive surgical techniques have revolutionized the field of surgery. Telesurgical manipulators (robots) and new information technologies strive to improve upon currently available minimally invasive techniques and create new possibilities. A retrospective review of all robotic cases at a single academic medical center from August 2000 until November 2002 was conducted. A comprehensive literature evaluation on robotic surgical technology was also performed. Robotic technology is safely and effectively being applied at our institution. Robotic and information technologies have improved upon minimally invasive surgical techniques and created new opportunities not attainable in open surgery. Robotic technology offers many benefits over traditional minimal access techniques and has been proven safe and effective. Further research is needed to better define the optimal application of this technology. Credentialing and educational requirements also need to be delineated.

150 Passenger Commercial Aircraft

NASA Technical Reports Server (NTRS)

Bucovsky, Adrian; Romli, Fairuz I.; Rupp, Jessica

2002-01-01

It has been projected that the need for a short-range mid-sized, aircraft is increasing. The future strategy to decrease long-haul flights will increase the demand for short-haul flights. Since passengers prefer to meet their destinations quickly, airlines will increase the frequency of flights, which will reduce the passenger load on the aircraft. If a point-to-point flight is not possible, passengers will prefer only a one-stop short connecting flight to their final destination. A 150-passenger aircraft is an ideal vehicle for these situations. It is mid-sized aircraft and has a range of 3000 nautical miles. This type of aircraft would market U.S. domestic flights or inter-European flight routes. The objective of the design of the 150-passenger aircraft is to minimize fuel consumption. The configuration of the aircraft must be optimized. This aircraft must meet CO2 and NOx emissions standards with minimal acquisition price and operating costs. This report contains all the work that has been performed for the completion of the design of a 150 passenger commercial aircraft. The methodology used is the Technology Identification, Evaluation, and Selection (TIES) developed at Georgia Tech Aerospace Systems Design laboratory (ASDL). This is an eight-step conceptual design process to evaluate the probability of meeting the design constraints. This methodology also allows for the evaluation of new technologies to be implemented into the design. The TIES process begins with defining the problem with a need established and a market targeted. With the customer requirements set and the target values established, a baseline concept is created. Next, the design space is explored to determine the feasibility and viability of the baseline aircraft configuration. If the design is neither feasible nor viable, new technologies can be implemented to open up the feasible design space and allow for a plausible solution. After the new technologies are identified, they must be evaluated to determine the physical compatibility of integrating multiple technologies and then the impact on the design, both improvements and degradations, must be determined. These technologies are assessed deterministically. Again, Response Surface Equations (RSEs) are developed to allow for a full factorial evaluation of the combinations of the technologies. The best combination of technologies is selected and then the design space is again reevaluated for feasibility and viability.

Using virtual reality technology and hand tracking technology to create software for training surgical skills in 3D game

NASA Astrophysics Data System (ADS)

Zakirova, A. A.; Ganiev, B. A.; Mullin, R. I.

2015-11-01

The lack of visible and approachable ways of training surgical skills is one of the main problems in medical education. Existing simulation training devices are not designed to teach students, and are not available due to the high cost of the equipment. Using modern technologies such as virtual reality and hands movements fixation technology we want to create innovative method of learning the technics of conducting operations in 3D game format, which can make education process interesting and effective. Creating of 3D format virtual simulator will allow to solve several conceptual problems at once: opportunity of practical skills improvement unlimited by the time without the risk for patient, high realism of environment in operational and anatomic body structures, using of game mechanics for information perception relief and memorization of methods acceleration, accessibility of this program.

The Graphics Tablet - A Valuable Tool for the Digital STEM Teacher

NASA Astrophysics Data System (ADS)

Stephens, Jeff

2018-04-01

I am inspired to write this article after coming across some publications in The Physics Teacher that all hit on topics of personal interest and experience. Similarly to Christensen my goal in writing this is to encourage other physics educators to take advantage of modern technology in delivering content to students and to feel comfortable doing so. There are numerous ways in which to create screencasts and lecture videos, some of which have been addressed in other articles. I invite those interested in learning how to create these videos to contact their educational technology staff or perform some internet searches on the topic. I will focus this article on the technology that enhanced the content I was delivering to my students. I will share a bit of my journey towards creating video materials and introduce a vital piece of technology, the graphics tablet, which changed the way I communicate with my students.

Progress of targeted genome modification approaches in higher plants.

PubMed

Cardi, Teodoro; Neal Stewart, C

2016-07-01

Transgene integration in plants is based on illegitimate recombination between non-homologous sequences. The low control of integration site and number of (trans/cis)gene copies might have negative consequences on the expression of transferred genes and their insertion within endogenous coding sequences. The first experiments conducted to use precise homologous recombination for gene integration commenced soon after the first demonstration that transgenic plants could be produced. Modern transgene targeting categories used in plant biology are: (a) homologous recombination-dependent gene targeting; (b) recombinase-mediated site-specific gene integration; (c) oligonucleotide-directed mutagenesis; (d) nuclease-mediated site-specific genome modifications. New tools enable precise gene replacement or stacking with exogenous sequences and targeted mutagenesis of endogeneous sequences. The possibility to engineer chimeric designer nucleases, which are able to target virtually any genomic site, and use them for inducing double-strand breaks in host DNA create new opportunities for both applied plant breeding and functional genomics. CRISPR is the most recent technology available for precise genome editing. Its rapid adoption in biological research is based on its inherent simplicity and efficacy. Its utilization, however, depends on available sequence information, especially for genome-wide analysis. We will review the approaches used for genome modification, specifically those for affecting gene integration and modification in higher plants. For each approach, the advantages and limitations will be noted. We also will speculate on how their actual commercial development and implementation in plant breeding will be affected by governmental regulations.

Technology in Science and Mathematics Education.

ERIC Educational Resources Information Center

Buccino, Alphonse

Provided are several perspectives on technology, addressing changes in learners related to technology, changes in contemporary life related to technology, and changes in subject areas related to technology (indicating that technology has created such new tools for inquiry as computer programming, word processing, online database searches, and…

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: ECR TECHNOLOGIES, INC., EARTHLINKED GROUND-SOURCE HEAT PUMP WATER HEATING SYSTEM

EPA Science Inventory

EPA has created the Environmental Technology Verification program to provide high quality, peer reviewed data on technology performance. This data is expected to accelerate the acceptance and use of improved environmental protection technologies. The Greenhouse Gas Technology C...

Leveraging technology: creating and sustaining changes for health.

PubMed

Teyhen, Deydre S; Aldag, Matt; Edinborough, Elton; Ghannadian, Jason D; Haught, Andrea; Kinn, Julie; Kunkler, Kevin J; Levine, Betty; McClain, James; Neal, David; Stewart, Tiffany; Thorndike, Frances P; Trabosh, Valerie; Wesensten, Nancy; Parramore, David J

2014-09-01

The rapid growth and evolution of health-related technology capabilities are driving an established presence in the marketplace and are opening up tremendous potential to minimize and/or mitigate barriers associated with achieving optimal health, performance, and readiness. This article summarizes technology-based strategies that promote healthy habits related to physical activity, nutrition, and sleep. The Telemedicine and Advanced Technology Research Center convened a workshop titled "Leveraging Technology: Creating & Sustaining Changes for Health" (May 29-30, 2013, Fort Detrick, MD). Participants included experts from academia (n=3), government (n=33), and industry (n=16). A modified Delphi method was used to establish expert consensus in six topic areas: (1) physical activity, (2) nutrition, (3) sleep, (4) incentives for behavior change, (5) usability/interoperability, and (6) mobile health/open platform. Overall, 162 technology features, constructs, and best practices were reviewed and prioritized for physical activity monitors (n=29), nutrition monitors (n=35), sleep monitors (n=24), incentives for change (n=36), usability and interoperability (n=25), and open data (n=13). Leading practices, gaps, and research needs for technology-based strategies were identified and prioritized. This information can be used to provide a research and development road map for (1) leveraging technology to minimize barriers to enhancing health and (2) facilitating evidence-based techniques to create and sustain healthy behaviors.

Low-enriched uranium high-density target project. Compendium report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vandegrift, George; Brown, M. Alex; Jerden, James L.

2016-09-01

At present, most 99Mo is produced in research, test, or isotope production reactors by irradiation of highly enriched uranium targets. To achieve the denser form of uranium needed for switching from high to low enriched uranium (LEU), targets in the form of a metal foil (~125-150 µm thick) are being developed. The LEU High Density Target Project successfully demonstrated several iterations of an LEU-fission-based Mo-99 technology that has the potential to provide the world’s supply of Mo-99, should major producers choose to utilize the technology. Over 50 annular high density targets have been successfully tested, and the assembly and disassemblymore » of targets have been improved and optimized. Two target front-end processes (acidic and electrochemical) have been scaled up and demonstrated to allow for the high-density target technology to mate up to the existing producer technology for target processing. In the event that a new target processing line is started, the chemical processing of the targets is greatly simplified. Extensive modeling and safety analysis has been conducted, and the target has been qualified to be inserted into the High Flux Isotope Reactor, which is considered above and beyond the requirements for the typical use of this target due to high fluence and irradiation duration.« less

Multicultural Media Authorship: Using Technology to Create Children's Literature Texts

ERIC Educational Resources Information Center

Byker, Erik Jon; Good, Amy J.; Miller, Erin; Kissel, Brian

2018-01-01

The purpose of this article is to describe and report on how a group of teacher candidates used technology to create multicultural texts which integrated literacy and social studies. To meet this purpose, the authors briefly describe the objectives of the assignment, examine 41 teacher candidates' perceptions of the assignment, and discuss media…

Pre-Service Teachers' Perception of and Technology Competency at Creating and Using E-Picture Books

ERIC Educational Resources Information Center

Park, Yong Joon; Yang, Youjin

2013-01-01

This study investigated pre-service teachers' perception of and technology competency in creating and using e-picture books in their future classrooms. Participants were 114 pre-service teachers in a required Early Childhood Education undergraduate course at a mid-western university in the United States. As part of the course assignments,…

Creating a Video Tour to Market Your Center

ERIC Educational Resources Information Center

Gellens, Suzanne; Mathews, Bobbie; Young, Shari

2012-01-01

Today, technology can be used to engage and communicate with others in ever-expanding ways. Many directors are embracing these technological advances to market their child care programs. In addition to printing up brochures and taking out ads in newspapers, directors can create a tour of their child care program that will attract new customers, as…

Digital Photography and Journals in a Kindergarten-First-Grade Classroom: Toward Meaningful Technology Integration in Early Childhood Education

ERIC Educational Resources Information Center

Ching, Cynthia Carter; Wang, X. Christine; Shih, Mei-Li; Kedem, Yore

2006-01-01

To explore meaningful and effective technology integration in early childhood education, we investigated how kindergarten-first-grade students created and employed digital photography journals to support social and cognitive reflection. These students used a digital camera to document their daily school activities and created digital photo…

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM - TECHNOLOGY PROFILES 4th Edition

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program evaluates new and promising treatment technologies for cleanup of hazardous waste sites. The program was created to encourage the development and routine use of innovative treatment technologies. As a result, the SI...

Search of the Deep and Dark Web via DARPA Memex

NASA Astrophysics Data System (ADS)

Mattmann, C. A.

2015-12-01

Search has progressed through several stages due to the increasing size of the Web. Search engines first focused on text and its rate of occurrence; then focused on the notion of link analysis and citation then on interactivity and guided search; and now on the use of social media - who we interact with, what we comment on, and who we follow (and who follows us). The next stage, referred to as "deep search," requires solutions that can bring together text, images, video, importance, interactivity, and social media to solve this challenging problem. The Apache Nutch project provides an open framework for large-scale, targeted, vertical search with capabilities to support all past and potential future search engine foci. Nutch is a flexible infrastructure allowing open access to ranking; URL selection and filtering approaches, to the link graph generated from search, and Nutch has spawned entire sub communities including Apache Hadoop and Apache Tika. It addresses many current needs with the capability to support new technologies such as image and video. On the DARPA Memex project, we are creating create specific extensions to Nutch that will directly improve its overall technological superiority for search and that will directly allow us to address complex search problems including human trafficking. We are integrating state-of-the-art algorithms developed by Kitware for IARPA Aladdin combined with work by Harvard to provide image and video understanding support allowing automatic detection of people and things and massive deployment via Nutch. We are expanding Apache Tika for scene understanding, object/person detection and classification in images/video. We are delivering an interactive and visual interface for initiating Nutch crawls. The interface uses Python technologies to expose Nutch data and to provide a domain specific language for crawls. With the Bokeh visualization library the interface we are delivering simple interactive crawl visualization and plotting techniques for exploring crawled information. The platform classifies, identify, and thwart predators, help to find victims and to identify buyers in human trafficking and will deliver technological superiority in search engines for DARPA. We are already transitioning the technologies into Geo and Planetary Science, and Bioinformatics.

DEAE-Dextran coated paclitaxel nanoparticles act as multifunctional nano system for intranuclear delivery to triple negative breast cancer through VEGF and NOTCH1 inhibition.

PubMed

Bakrania, Anita K; Variya, Bhavesh C; Rathod, Lalaji V; Patel, Snehal S

2018-01-01

Triple negative breast cancer revolution has identified a plethora of therapeutic targets making it apparent that a single target for its treatment could be rare hence creating an urge to develop robust technologies for combination drug therapy. Paclitaxel, hailed as the most significant advancement in chemotherapy faces several underpinnings due to its low solubility and permeability. Advancing research has demonstrated the role of interferons in cancer. DEAE-Dextran, an emerging molecule with evidence of interferon induction was utilized in the present study to develop a nanoformulation in conjugation with paclitaxel to target multiple therapeutic pathways, with diminution of paclitaxel adverse effects and develop a specific targeted nano system. Evidently, it was demonstrated that DEAE-Dextran coated nanoformulation portrays significant synergistic cytotoxicity in the various cell lines. Moreover, overcoming the activation of ROS by paclitaxel, the combination drug therapy more effectively inhibited ROS through β-interferon induction. The nanoformulation was further conjugated to FITC for internalization studies which subsequently indicated maximum cellular uptake at 60min post treatment demonstrated by green fluorescence from FITC lighting up the nuclear membrane. Precisely, the mechanistic approach of nuclear-targeted nanoformulation was evaluated by in vivo xenograft studies which showed a synergistic release of β-interferon at the target organ. Moreover, the combination nanoformulation inculcated multiple mechanistic approaches through VEGF and NOTCH1 inhibition along with dual β and γ-interferon overexpression. Overall, the combination therapy may be a promising multifunctional nanomaterial for intranuclear drug delivery in TNBC. Copyright © 2017 Elsevier B.V. All rights reserved.

Creating a course-based web site in a university environment

NASA Astrophysics Data System (ADS)

Robin, Bernard R.; Mcneil, Sara G.

1997-06-01

The delivery of educational materials is undergoing a remarkable change from the traditional lecture method to dissemination of courses via the World Wide Web. This paradigm shift from a paper-based structure to an electronic one has profound implications for university faculty. Students are enrolling in classes with the expectation of using technology and logging on to the Internet, and professors are realizing that the potential of the Web can have a significant impact on classroom activities. An effective method of integrating electronic technologies into teaching and learning is to publish classroom materials on the World Wide Web. Already, many faculty members are creating their own home pages and Web sites for courses that include syllabi, handouts, and student work. Additionally, educators are finding value in adding hypertext links to a wide variety of related Web resources from online research and electronic journals to government and commercial sites. A number of issues must be considered when developing course-based Web sites. These include meeting the needs of a target audience, designing effective instructional materials, and integrating graphics and other multimedia components. There are also numerous technical issues that must be addressed in developing, uploading and maintaining HTML documents. This article presents a model for a university faculty who want to begin using the Web in their teaching and is based on the experiences of two College of Education professors who are using the Web as an integral part of their graduate courses.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Germain, Shawn

Nuclear Power Plant (NPP) refueling outages create some of the most challenging activities the utilities face in both tracking and coordinating thousands of activities in a short period of time. Other challenges, including nuclear safety concerns arising from atypical system configurations and resource allocation issues, can create delays and schedule overruns, driving up outage costs. Today the majority of the outage communication is done using processes that do not take advantage of advances in modern technologies that enable enhanced communication, collaboration and information sharing. Some of the common practices include: runners that deliver paper-based requests for approval, radios, telephones, desktopmore » computers, daily schedule printouts, and static whiteboards that are used to display information. Many gains have been made to reduce the challenges facing outage coordinators; however; new opportunities can be realized by utilizing modern technological advancements in communication and information tools that can enhance the collective situational awareness of plant personnel leading to improved decision-making. Ongoing research as part of the Light Water Reactor Sustainability Program (LWRS) has been targeting NPP outage improvement. As part of this research, various applications of collaborative software have been demonstrated through pilot project utility partnerships. Collaboration software can be utilized as part of the larger concept of Computer-Supported Cooperative Work (CSCW). Collaborative software can be used for emergent issue resolution, Outage Control Center (OCC) displays, and schedule monitoring. Use of collaboration software enables outage staff and subject matter experts (SMEs) to view and update critical outage information from any location on site or off.« less

User Interface Technology for Formal Specification Development

NASA Technical Reports Server (NTRS)

Lowry, Michael; Philpot, Andrew; Pressburger, Thomas; Underwood, Ian; Lum, Henry, Jr. (Technical Monitor)

1994-01-01

Formal specification development and modification are an essential component of the knowledge-based software life cycle. User interface technology is needed to empower end-users to create their own formal specifications. This paper describes the advanced user interface for AMPHION1 a knowledge-based software engineering system that targets scientific subroutine libraries. AMPHION is a generic, domain-independent architecture that is specialized to an application domain through a declarative domain theory. Formal specification development and reuse is made accessible to end-users through an intuitive graphical interface that provides semantic guidance in creating diagrams denoting formal specifications in an application domain. The diagrams also serve to document the specifications. Automatic deductive program synthesis ensures that end-user specifications are correctly implemented. The tables that drive AMPHION's user interface are automatically compiled from a domain theory; portions of the interface can be customized by the end-user. The user interface facilitates formal specification development by hiding syntactic details, such as logical notation. It also turns some of the barriers for end-user specification development associated with strongly typed formal languages into active sources of guidance, without restricting advanced users. The interface is especially suited for specification modification. AMPHION has been applied to the domain of solar system kinematics through the development of a declarative domain theory. Testing over six months with planetary scientists indicates that AMPHION's interactive specification acquisition paradigm enables users to develop, modify, and reuse specifications at least an order of magnitude more rapidly than manual program development.

Developing targets for radiation transport experiments at the Omega laser facility

DOE PAGES

Capelli, Deanna; Charsley-Groffman, C. A.; Randolph, Randall Blaine; ...

2017-07-13

Targets have been developed to measure supersonic radiation transport in aerogel foams using absorption spectroscopy. The target consists of an aerogel foam uniformly doped with either titanium or scandium inserted into an undoped aerogel foam package. This creates a localized doped foam region to provide spatial resolution for the measurement. Development and characterization of the foams is a key challenge in addition to machining and assembling the two foams so they mate without gaps. The foam package is inserted into a beryllium sleeve and mounted on a gold hohlraum. The target is mounted to a holder created using additive manufacturingmore » and mounted on a stalk. As a result, the manufacturing of the components, along with assembly and metrology of the target are described here.« less

Developing targets for radiation transport experiments at the Omega laser facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Capelli, Deanna; Charsley-Groffman, C. A.; Randolph, Randall Blaine

Targets have been developed to measure supersonic radiation transport in aerogel foams using absorption spectroscopy. The target consists of an aerogel foam uniformly doped with either titanium or scandium inserted into an undoped aerogel foam package. This creates a localized doped foam region to provide spatial resolution for the measurement. Development and characterization of the foams is a key challenge in addition to machining and assembling the two foams so they mate without gaps. The foam package is inserted into a beryllium sleeve and mounted on a gold hohlraum. The target is mounted to a holder created using additive manufacturingmore » and mounted on a stalk. As a result, the manufacturing of the components, along with assembly and metrology of the target are described here.« less

A New Satellite System for Measuring BRDF from Space

NASA Technical Reports Server (NTRS)

Wiscombe, W.; Kaufman, Y.; Herman, J.

1999-01-01

Formation flying of satellites is at the beginning of an explosive growth curve. Spacecraft buses are shrinking to the point where we will soon be able to launch 10 micro-satellites or 100 nano-satellites on a single launch vehicle. Simultaneously, spectrometers are just beginning to be flown in space by both the U.S. and Europe. On-board programmable band aggregation will soon allow exactly the spectral bands desired to be returned to Earth. Further efforts are being devoted to radically shrink spectrometers both in size and weight. And GPS positioning and attitude determination, plus new technologies for attitude control, will allow fleets of satellites to all point at the same Earth target. All these advances, in combination, make possible for the first time the proper measurement of Bidirectional Reflectance Distribution (BRDF) form space. Previously space BDRF's were mere composites, built up over time by viewing different types of scenes at different times, then creating catalogs of BDRF functions whose use relied upon correct "scene identification" --the weak link. Formation-flying micro-satellites, carrying programmable spectrometers and precision-pointing at the same Earth target, can measure the full BDRF simultaneously, in real time. This talk will review these technological advances and discuss an actual proposed concept, based on these advances, to measure Earth-target BDRF's (clouds as well as surface) across the full solar spectrum in the 2010 timeframe. This concept is part of a larger concept called Leonardo for properly measuring the radiative forcing of Earth for climate purposes; lack of knowing of BDRF and of diurnal cycle are at present the two limiting factors preventing improved estimates of this forcing.

Self-proton/ion radiography of laser-produced proton/ion beam from thin foil targets

NASA Astrophysics Data System (ADS)

Paudel, Y.; Renard-Le Galloudec, N.; Nicolai, Ph.; d'Humieres, E.; Ya. Faenov, A.; Kantsyrev, V. L.; Safronova, A. S.; Shrestha, I.; Osborne, G. C.; Shlyaptseva, V. V.; Sentoku, Y.

2012-12-01

Protons and multicharged ions generated from high-intensity laser interactions with thin foil targets have been studied with a 100 TW laser system. Protons/ions with energies up to 10 MeV are accelerated either from the front or the rear surface of the target material. We have observed for the first time that the protons/ions accelerated from the front surface of the target, in a direction opposite to the laser propagation direction, are turned around and pulled back to the rear surface, in the laser propagation direction. This proton/ion beam is able to create a self-radiograph of the target and glass stalk holding the target itself recorded through the radiochromic film stack. This unique result indicates strong long-living (ns time scale) magnetic fields present in the laser-produced plasma, which are extremely important in energy transport during the intense laser irradiation. The magnetic field from laser main pulse expands rapidly in the preformed plasma to rotate the laser produced protons. Radiation hydrodynamic simulations and ray tracing found that the magnetic field created by the amplified spontaneous emission prepulse is not sufficient to explain the particle trajectories, but the additional field created by the main pulse interaction estimated from particle-in-cell simulation is able to change the particle trajectories.

A Study of the Factors Associated with Successful Technology Transfer and their Applicability to Air Force Technology Transfers.

DTIC Science & Technology

1995-09-01

transfer project. (D) 8a Organization has a technology transfer organization. (D,A) 10a Marketing and advertising of technologies targeted to relevant...Entrepreneurial (D) Developer: 10A: Marketing and advertising of technologies targeted to relevant industries. Most developers indicate that they marketed...regard to marketing and advertising . 10B: Technology maturation supported by internal units or by contracting out. Technology maturation is the

Infrared small target tracking based on SOPC

NASA Astrophysics Data System (ADS)

Hu, Taotao; Fan, Xiang; Zhang, Yu-Jin; Cheng, Zheng-dong; Zhu, Bin

2011-01-01

The paper presents a low cost FPGA based solution for a real-time infrared small target tracking system. A specialized architecture is presented based on a soft RISC processor capable of running kernel based mean shift tracking algorithm. Mean shift tracking algorithm is realized in NIOS II soft-core with SOPC (System on a Programmable Chip) technology. Though mean shift algorithm is widely used for target tracking, the original mean shift algorithm can not be directly used for infrared small target tracking. As infrared small target only has intensity information, so an improved mean shift algorithm is presented in this paper. How to describe target will determine whether target can be tracked by mean shift algorithm. Because color target can be tracked well by mean shift algorithm, imitating color image expression, spatial component and temporal component are advanced to describe target, which forms pseudo-color image. In order to improve the processing speed parallel technology and pipeline technology are taken. Two RAM are taken to stored images separately by ping-pong technology. A FLASH is used to store mass temp data. The experimental results show that infrared small target is tracked stably in complicated background.

SUSTAINABILITY PERSPECTIVE AND CHEMISTRY-BASED TECHNOLOGIES

EPA Science Inventory

Inefficient technologies create adverse and societal impacts while consuming material and energy resources. Yet technology enterprises are the strongest enabler of sustainability. Technologies that will address the complex concerns of these impacts and the consequences of the u...

Modeling and numerical analysis of a magneto-inertial fusion concept with the target created through FRC merging

NASA Astrophysics Data System (ADS)

Li, Chenguang; Yang, Xianjun

2016-10-01

The Magnetized Plasma Fusion Reactor concept is proposed as a magneto-inertial fusion approach based on the target plasma created through the collision merging of two oppositely translating field reversed configuration plasmas, which is then compressed by the imploding liner driven by the pulsed-power driver. The target creation process is described by a two-dimensional magnetohydrodynamics model, resulting in the typical target parameters. The implosion process and the fusion reaction are modeled by a simple zero-dimensional model, taking into account the alpha particle heating and the bremsstrahlung radiation loss. The compression on the target can be 2D cylindrical or 2.4D with the additive axial contraction taken into account. The dynamics of the liner compression and fusion burning are simulated and the optimum fusion gain and the associated target parameters are predicted. The scientific breakeven could be achieved at the optimized conditions.

Applications of Biophysics in High-Throughput Screening Hit Validation.

PubMed

Genick, Christine Clougherty; Barlier, Danielle; Monna, Dominique; Brunner, Reto; Bé, Céline; Scheufler, Clemens; Ottl, Johannes

2014-06-01

For approximately a decade, biophysical methods have been used to validate positive hits selected from high-throughput screening (HTS) campaigns with the goal to verify binding interactions using label-free assays. By applying label-free readouts, screen artifacts created by compound interference and fluorescence are discovered, enabling further characterization of the hits for their target specificity and selectivity. The use of several biophysical methods to extract this type of high-content information is required to prevent the promotion of false positives to the next level of hit validation and to select the best candidates for further chemical optimization. The typical technologies applied in this arena include dynamic light scattering, turbidometry, resonance waveguide, surface plasmon resonance, differential scanning fluorimetry, mass spectrometry, and others. Each technology can provide different types of information to enable the characterization of the binding interaction. Thus, these technologies can be incorporated in a hit-validation strategy not only according to the profile of chemical matter that is desired by the medicinal chemists, but also in a manner that is in agreement with the target protein's amenability to the screening format. Here, we present the results of screening strategies using biophysics with the objective to evaluate the approaches, discuss the advantages and challenges, and summarize the benefits in reference to lead discovery. In summary, the biophysics screens presented here demonstrated various hit rates from a list of ~2000 preselected, IC50-validated hits from HTS (an IC50 is the inhibitor concentration at which 50% inhibition of activity is observed). There are several lessons learned from these biophysical screens, which will be discussed in this article. © 2014 Society for Laboratory Automation and Screening.

Specific genetic modifications of domestic animals by gene targeting and animal cloning

PubMed Central

Wang, Bin; Zhou, Jiangfeng

2003-01-01

The technology of gene targeting through homologous recombination has been extremely useful for elucidating gene functions in mice. The application of this technology was thought impossible in the large livestock species until the successful creation of the first mammalian clone "Dolly" the sheep. The combination of the technologies for gene targeting of somatic cells with those of animal cloning made it possible to introduce specific genetic mutations into domestic animals. In this review, the principles of gene targeting in somatic cells and the challenges of nuclear transfer using gene-targeted cells are discussed. The relevance of gene targeting in domestic animals for applications in bio-medicine and agriculture are also examined. PMID:14614774

Creating Project CREATE: Lessons Learned and Best Practices for Developing Web-Based Resources for Public Health Practitioners

ERIC Educational Resources Information Center

McGladrey, Margaret; Noar, Seth; Crosby, Richard; Young, April; Webb, Elizabeth

2012-01-01

Background: This paper discusses the Rural Center for AIDS/STD Prevention's effort to develop a web-based service called Project CREATE that responds to a need for targeted health promotion materials expressed by directors of HIV/STD prevention services in predominately rural states. Purpose: Project CREATE allows users to select customized…

Media, Information Technology, and Language Planning: What Can Endangered Language Communities Learn from Created Language Communities?

ERIC Educational Resources Information Center

Schreyer, Christine

2011-01-01

The languages of Klingon and Na'vi, both created for media, are also languages that have garnered much media attention throughout the course of their existence. Speakers of these languages also utilize social media and information technologies, specifically websites, in order to learn the languages and then put them into practice. While teaching a…

Factors Predicting the Use of Technology: Findings From the Center for Research and Education on Aging and Technology Enhancement (CREATE)

PubMed Central

Czaja, Sara J.; Charness, Neil; Fisk, Arthur D.; Hertzog, Christopher; Nair, Sankaran N.; Rogers, Wendy A.; Sharit, Joseph

2006-01-01

The successful adoption of technology is becoming increasingly important to functional independence. The present article reports findings from the Center for Research and Education on Aging and Technology Enhancement (CREATE) on the use of technology among community-dwelling adults. The sample included 1,204 individuals ranging in age from 18–91 years. All participants completed a battery that included measures of demographic characteristics, self-rated health, experience with technology, attitudes toward computers, and component cognitive abilities. Findings indicate that the older adults were less likely than younger adults to use technology in general, computers, and the World Wide Web. The results also indicate that computer anxiety, fluid intelligence, and crystallized intelligence were important predictors of the use of technology. The relationship between age and adoption of technology was mediated by cognitive abilities, computer self-efficacy, and computer anxiety. These findings are discussed in terms of training strategies to promote technology adoption. PMID:16768579

Accelerating innovation in information and communication technology for health.

PubMed

Crean, Kevin W

2010-02-01

Around the world, inventors are creating novel information and communication technology applications and systems that can improve health for people in disparate settings. However, it is very difficult to find investment funding needed to create business models to expand and develop the prototype technologies. A comprehensive, long-term investment strategy for e-health and m-health is needed. The field of social entrepreneurship offers an integrated approach to develop needed investment models, so that innovations can reach more patients, more effectively. Specialized financing techniques and sustained support from investors can spur the expansion of mature technologies to larger markets, accelerating global health impacts.

Infographic Development by Accelerated Bachelor of Science in Nursing Students: An Innovative Technology-Based Approach to Public Health Education.

PubMed

Falk, Nancy L

Health communications and baccalaureate nursing education are increasingly impacted by new technological tools. This article describes how an Accelerated Bachelor of Science in Nursing program incorporates an infographic assignment into a graduate-level online health information and technology course. Students create colorful, engaging infographics using words and visuals to communicate public health information. The assignment, which incorporates the use of data and evidence, provides students the opportunity to acquire new research and technology skills while gaining confidence creating and innovating. The finished products may be disseminated, serving as vehicles to influence public health and well-being.

Incentives to create and sustain healthy behaviors: technology solutions and research needs.

PubMed

Teyhen, Deydre S; Aldag, Matt; Centola, Damon; Edinborough, Elton; Ghannadian, Jason D; Haught, Andrea; Jackson, Theresa; Kinn, Julie; Kunkler, Kevin J; Levine, Betty; Martindale, Valerie E; Neal, David; Snyder, Leslie B; Styn, Mindi A; Thorndike, Frances; Trabosh, Valerie; Parramore, David J

2014-12-01

Health-related technology, its relevance, and its availability are rapidly evolving. Technology offers great potential to minimize and/or mitigate barriers associated with achieving optimal health, performance, and readiness. In support of the U.S. Army Surgeon General's vision for a "System for Health" and its Performance Triad initiative, the U.S. Army Telemedicine and Advanced Technology Research Center hosted a workshop in April 2013 titled "Incentives to Create and Sustain Change for Health." Members of government and academia participated to identify and define the opportunities, gain clarity in leading practices and research gaps, and articulate the characteristics of future technology solutions to create and sustain real change in the health of individuals, the Army, and the nation. The key factors discussed included (1) public health messaging, (2) changing health habits and the environmental influence on health, (3) goal setting and tracking, (4) the role of incentives in behavior change intervention, and (5) the role of peer and social networks in change. This report summarizes the recommendations on how technology solutions could be employed to leverage evidence-based best practices and identifies gaps in research where further investigation is needed. Reprint & Copyright © 2014 Association of Military Surgeons of the U.S.

Colloborative International Resesarch on the Water Energy Nexus: Lessons Learned from the Clean Energy Research Center - Water Energy Technologies (CERC-WET)

NASA Astrophysics Data System (ADS)

Remick, C.

2017-12-01

The U.S.-China Clean Energy Research Center - Water and Energy Technologies (CERC-WET) is a global research partnership focused on developing and deploying technologies that to allow the U.S. and China to thrive in a future with constrained energy and water resources in a changing global climate. This presentation outlines and addresses the opportunities and challenges for international research collaboration on the so called "water-energy nexus", with a focus on industrial partnership, market readiness, and intellectual property. The U.S. Department of Energy created the CERC program as a research and development partnership between the United States and China to accelerate the development and deployment of advanced clean energy technologies. The United States and China are not only the world's largest economies; they are also the world's largest energy producers and energy consumers. Together, they account for about 40% of annual global greenhouse gas emissions. The bilateral investment in CERC-WET will total $50 million over five years and will target on the emerging issues and cut-edge research on the topics of (1) water use reduction at thermoelectric plants; (2) treatment and management of non-traditional waters; (3) improvements in sustainable hydropower design and operation; (4) climate impact modeling, methods, and scenarios to support improved understanding of energy and water systems; and (5) data and analysis to inform planning and policy.

Creating a pandemic of health: What is the role of digital technologies?

PubMed

Jadad, Alejandro R

2016-11-01

Imagine a world in which every human being is healthy until the last breath. Thanks to the fast penetration of digital technologies in every region of the planet, this seemingly utopian scenario is not only feasible but also potentially viable. Now that digital technologies have provided almost full interconnectivity among all humans, they should be used to meet key challenges to ensure that health is created and that it spreads to reach every person on earth. The objective of this article is to describe and trigger a serious discussion of such challenges, which include: adopting a new concept of health; positioning self-rated health as the main outcome of the system; creating a health-oriented model to guide service provision; facilitating the identification, scaling up, and sustaining of innovations that can create and spread health; promoting a culture of health promotion; and encouraging the emergence of Precision Health. Once these challenges are met, and health becomes pandemic, public health would have fulfilled its vision, a healthy life for all, at last.

PERFORMANCE VERIFICATION OF ANIMAL WATER TREATMENT TECHNOLOGIES THROUGH EPA'S ENVIRONMENTAL TECHNOLOGY VERIFICATION PROGRAM

EPA Science Inventory

The U.S. Environmental Protection Agency created the Environmental Technology Verification Program (ETV) to further environmental protection by accelerating the commercialization of new and innovative technology through independent performance verification and dissemination of in...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM TECHNOLOGY PROFILES: SIXTH EDITION

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program evaluates new and promising treatment and monitoring and measurement technologies for cleanup of hazardous waste sites. The program was created to encourage the development and routine use of innovative treatment techn...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM - TECHNOLOGY PROFILES - SEVENTH EDITION

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program evaluates new and promising treatment and monitoring and measurement technologies for cleanup of hazardous waste sites. The program was created to encourage the development and routine use of innovative treatment techn...

Optoelectronics technologies for Virtual Reality systems

NASA Astrophysics Data System (ADS)

Piszczek, Marek; Maciejewski, Marcin; Pomianek, Mateusz; Szustakowski, Mieczysław

2017-08-01

Solutions in the field of virtual reality are very strongly associated with optoelectronic technologies. This applies to both process design and operation of VR applications. Technologies such as 360 cameras and 3D scanners significantly improve the design work. What is more, HMD displays with high field of view or optoelectronic Motion Capture systems and 3D cameras guarantee an extraordinary experience in immersive VR applications. This article reviews selected technologies from the perspective of their use in a broadly defined process of creating and implementing solutions for virtual reality. There is also the ability to create, modify and adapt new approaches that show team own work (SteamVR tracker). Most of the introduced examples are effectively used by authors to create different VR applications. The use of optoelectronic technology in virtual reality is presented in terms of design and operation of the system as well as referring to specific applications. Designers and users of VR systems should take a close look on new optoelectronics solutions, as they can significantly contribute to increased work efficiency and offer completely new opportunities for virtual world reception.

Phosphonated Near-Infrared Fluorophores for Biomedical Imaging of Bone**

PubMed Central

Hyun, Hoon; Wada, Hideyuki; Bao, Kai; Gravier, Julien; Yadav, Yogesh; Laramie, Matt; Henary, Maged; Frangioni, John V.

2014-01-01

The conventional method for creating targeted contrast agents is to conjugate separate targeting and fluorophore domains. In this study we report a new strategy based on incorporation of targeting moieties into the non-resonant structure of pentamethine and heptamethine indocyanines. Using the known affinity of phosphonates for bone minerals as a model system, we have synthesized two families of bifunctional molecules that target bone without the need for a traditional bisphosphonate. With peak fluorescence emission at ≈ 700 nm or ≈ 800 nm, these molecules can be used for FLARE dual-channel imaging. Longitudinal FLARE studies in mice demonstrate that phosphonated near-infrared fluorophores remain stable in bone for over 5 weeks, and histological analysis demonstrates incorporation into bone matrix. Taken together, we describe a new strategy for creating ultracompact, targeted, near-infrared fluorophores for various bioimaging applications. PMID:25139079

Reflector Technology Development and System Design for Concentrating Solar Power Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adam Schaut

2011-12-30

Alcoa began this program in March of 2008 with the goal of developing and validating an advanced CSP trough design to lower the levelized cost of energy (LCOE) as compared to existing glass based, space-frame trough technology. In addition to showing a pathway to a significant LCOE reduction, Alcoa also desired to create US jobs to support the emerging CSP industry. Alcoa's objective during Phase I: Concept Feasibility was to provide the DOE with a design approach that demonstrates significant overall system cost savings without sacrificing performance. Phase I consisted of two major tasks; reflector surface development and system conceptmore » development. Two specific reflective surface technologies were investigated, silver metallized lamination, and thin film deposition both applied on an aluminum substrate. Alcoa prepared samples; performed test validation internally; and provided samples to the NREL for full-spectrum reflectivity measurements. The final objective was to report reflectivity at t = 0 and the latest durability results as of the completion of Phase 1. The target criteria for reflectance and durability were as follows: (1) initial (t = 0), hemispherical reflectance >93%, (2) initial spectral reflectance >90% for 25-mrad reading and >87% for 7-mrad reading, and (3) predicted 20 year durability of less than 5% optical performance drop. While the results of the reflective development activities were promising, Alcoa was unable to down-select on a reflective technology that met the target criteria. Given the progress and potential of both silver film and thin film technologies, Alcoa continued reflector surface development activities in Phase II. The Phase I concept development activities began with acquiring baseline CSP system information from both CSP Services and the DOE. This information was used as the basis to develop conceptual designs through ideation sessions. The concepts were evaluated based on estimated cost and high-level structural performance. The target criteria for the concept development was to achieve a solar field cost savings of 25%-50% thereby meeting or exceeding the DOE solar field cost savings target of $350/m2. After evaluating various structural design approaches, Alcoa down-selected to a monocoque, dubbed Wing Box, design that utilizes the reflective surface as a structural, load carrying member. The cost and performance potential of the Wing Box concept was developed via initial finite element analysis (FEA) and cost modeling. The structural members were sized through material utilization modeling when subjected to representative loading conditions including wind loading. Cost modeling was utilized to refine potential manufacturing techniques that could be employed to manufacture the structural members. Alcoa concluded that an aluminum intensive collector design can achieve significant cost savings without sacrificing performance. Based on the cost saving potential of this Concept Feasibility study, Alcoa recommended further validation of this CSP approach through the execution of Phase II: Design and Prototype Development. Alcoa Phase II objective was to provide the DOE with a validated CSP trough design that demonstrates significant overall system cost savings without sacrificing performance. Phase II consisted of three major tasks; Detail System Design, Prototype Build, and System Validation. Additionally, the reflector surface development that began in Phase I was continued in Phase II. After further development work, Alcoa was unable to develop a reflective technology that demonstrated significant performance or cost benefits compared to commercially available CSP reflective products. After considering other commercially available reflective surfaces, Alcoa selected Alano's MIRO-SUN product for use on the full scale prototype. Although MIRO-SUN has a lower specular reflectivity compared to other options, its durability in terms of handling, cleaning, and long-term reflectivity was deemed the most important attribute to successfully validate Alcoa's advanced trough architecture. To validate the performance of the Wing Box trough, a 6 meter aperture by 14 meter long prototype trough was built. For ease of shipping to and assembly at NREL's test facility, the prototype was fabricated in two half modules and joined along the centerline to create the Wing Box trough. The trough components were designed to achieve high precision of the reflective surface while leveraging high volume manufacturing and assembly techniques.« less

Filtering NetCDF Files by Using the EverVIEW Slice and Dice Tool

USGS Publications Warehouse

Conzelmann, Craig; Romañach, Stephanie S.

2010-01-01

Network Common Data Form (NetCDF) is a self-describing, machine-independent file format for storing array-oriented scientific data. It was created to provide a common interface between applications and real-time meteorological and other scientific data. Over the past few years, there has been a growing movement within the community of natural resource managers in The Everglades, Fla., to use NetCDF as the standard data container for datasets based on multidimensional arrays. As a consequence, a need surfaced for additional tools to view and manipulate NetCDF datasets, specifically to filter the files by creating subsets of large NetCDF files. The U.S. Geological Survey (USGS) and the Joint Ecosystem Modeling (JEM) group are working to address these needs with applications like the EverVIEW Slice and Dice Tool, which allows users to filter grid-based NetCDF files, thus targeting those data most important to them. The major functions of this tool are as follows: (1) to create subsets of NetCDF files temporally, spatially, and by data value; (2) to view the NetCDF data in table form; and (3) to export the filtered data to a comma-separated value (CSV) file format. The USGS and JEM will continue to work with scientists and natural resource managers across The Everglades to solve complex restoration problems through technological advances.

Probiotics and gastrointestinal disease: successes, problems and future prospects

PubMed Central

2009-01-01

Gastrointestinal disease is a major cause of morbidity and mortality worldwide each year. Treatment of chronic inflammatory gastrointestinal conditions such as ulcerative colitis and Crohn's disease is difficult due to the ambiguity surrounding their precise aetiology. Infectious gastrointestinal diseases, such as various types of diarrheal disease are also becoming increasingly difficult to treat due to the increasing dissemination of antibiotic resistance among microorganisms and the emergence of the so-called 'superbugs'. Taking into consideration these problems, the need for novel therapeutics is essential. Although described for over a century probiotics have only been extensively researched in recent years. Their use in the treatment and prevention of disease, particularly gastrointestinal disease, has yielded many successful results, some of which we outline in this review. Although promising, many probiotics are hindered by inherent physiological and technological weaknesses and often the most clinically promising strains are unusable. Consequently we discuss various strategies whereby probiotics may be engineered to create designer probiotics. Such innovative approaches include; a receptor mimicry strategy to create probiotics that target specific pathogens and toxins, a patho-biotechnology approach using pathogen-derived genes to create more robust probiotic stains with increased host and processing-associated stress tolerance profiles and meta-biotechnology, whereby, functional metagenomics may be used to identify novel genes from diverse and vastly unexplored environments, such as the human gut, for use in biotechnology and medicine. PMID:19930635

Probiotics and gastrointestinal disease: successes, problems and future prospects.

PubMed

Culligan, Eamonn P; Hill, Colin; Sleator, Roy D

2009-11-23

Gastrointestinal disease is a major cause of morbidity and mortality worldwide each year. Treatment of chronic inflammatory gastrointestinal conditions such as ulcerative colitis and Crohn's disease is difficult due to the ambiguity surrounding their precise aetiology. Infectious gastrointestinal diseases, such as various types of diarrheal disease are also becoming increasingly difficult to treat due to the increasing dissemination of antibiotic resistance among microorganisms and the emergence of the so-called 'superbugs'. Taking into consideration these problems, the need for novel therapeutics is essential. Although described for over a century probiotics have only been extensively researched in recent years. Their use in the treatment and prevention of disease, particularly gastrointestinal disease, has yielded many successful results, some of which we outline in this review. Although promising, many probiotics are hindered by inherent physiological and technological weaknesses and often the most clinically promising strains are unusable. Consequently we discuss various strategies whereby probiotics may be engineered to create designer probiotics. Such innovative approaches include; a receptor mimicry strategy to create probiotics that target specific pathogens and toxins, a patho-biotechnology approach using pathogen-derived genes to create more robust probiotic stains with increased host and processing-associated stress tolerance profiles and meta-biotechnology, whereby, functional metagenomics may be used to identify novel genes from diverse and vastly unexplored environments, such as the human gut, for use in biotechnology and medicine.

The Technological Dimensions of International Competitiveness.

ERIC Educational Resources Information Center

National Academy of Engineering, Washington, DC. Committee on Technology Issues That Impact International Competitiveness.

This report focuses primarily on the technological dimensions of competitiveness in the United States with its capability to: create and effectively use technology; increase the value added to goods and services through the application of technology; manage technology in industry for more effective relationships among companies, universities, and…

Research challange

DOE Office of Scientific and Technical Information (OSTI.GOV)

Staebler, G.R.

The technological forecast can be used as a research tool by describing the optimum forest from every plausible viewpoint and then charting a course to create it. We must make usable the things we already know, and define, plan, and execute a research attack on those we don't. The three main areas we must consider are full use of the land, maximization of production, and research management and administration. In all these considerations we must keep in mind that technology creates the need for more technology, and that it is biologically necessary to preserve the long look.

Technology-driven dietary assessment: a software developer’s perspective

PubMed Central

Buday, Richard; Tapia, Ramsey; Maze, Gary R.

2015-01-01

Dietary researchers need new software to improve nutrition data collection and analysis, but creating information technology is difficult. Software development projects may be unsuccessful due to inadequate understanding of needs, management problems, technology barriers or legal hurdles. Cost overruns and schedule delays are common. Barriers facing scientific researchers developing software include workflow, cost, schedule, and team issues. Different methods of software development and the role that intellectual property rights play are discussed. A dietary researcher must carefully consider multiple issues to maximize the likelihood of success when creating new software. PMID:22591224

Scaling up Evidence-based Practices for Children and Families in New York State: Towards Evidence-based Policies on Implementation for State Mental Health Systems

PubMed Central

Hoagwood, Kimberly Eaton; Olin, S. Serene; Horwitz, Sarah; McKay, Mary; Cleek, Andrew; Gleacher, Alissa; Lewandowski, Eric; Nadeem, Erum; Acri, Mary; Chor, Ka Ho Brian; Kuppinger, Anne; Burton, Geraldine; Weiss, Dara; Frank, Samantha; Finnerty, Molly; Bradbury, Donna M.; Woodlock, Kristin M.; Hogan, Michael

2014-01-01

Dissemination of innovations is widely considered the sine qua non for system improvement. At least two dozen states are rolling-out evidence-based mental health practices targeted at children and families using trainings, consultations, webinars, and learning collaboratives to improve quality and outcomes. In New York State (NYS) a group of researchers, policy-makers, providers and family support specialists have worked in partnership since 2002 to redesign and evaluate the children’s mental health system. Five system strategies driven by empirically-based practices and organized within a state-supported infrastructure have been used in the child and family service system with over 2,000 providers: (a) business practices; (b) use of health information technologies in quality improvement; (c) specific clinical interventions targeted at common childhood disorders; (d) parent activation; and (e) quality indicator development. The NYS system has provided a laboratory for naturalistic experiments. We describe these initiatives, key findings and challenges, lessons learned for scaling, and implications for creating evidence-based implementation policies in state systems. PMID:24460518

Computational and Experimental Studies of Electrospray Deposition of Nanoparticle Suspensions

NASA Astrophysics Data System (ADS)

Yong, Xin; Li, Ao; Brown, Nicholas; Zhao, Mingfei; Zhu, Yaqun; German, Guy; Chiarot, Paul

2017-11-01

Electrospray offers unique capabilities for deploying colloidal suspensions to create nanoparticle films and coatings. It can deliver precise quantities of particles in a dry state and overcomes many limitations of other technologies. We integrate simulations and experiments to elucidate the relationship between the key operating parameters and the structure of an electrospray deposit. We investigate the role of the electrospray time, the target substrate properties, and the polydispersity of the colloidal suspensions. The deposition patterns are similar for all spray times and substrates. In particular, the deposited particles segregate to the center and edge of a deposit, leaving a depletion region in between. Using a Lagrangian particle tracking method with convective droplet evaporation, we highlight the critical role of the space charge interactions inside the plume in governing the trajectory of the emitted particles and the ensuing deposit morphology. The microstructure of a deposit is also influenced by the electrical conductivity of the target substrate. The residual charges on the particles deposited on to a dielectric substrate influence the deposition of subsequent in-flight particles.

Small-molecule inhibitors directly target CARD9 and mimic its protective variant in inflammatory bowel disease.

PubMed

Leshchiner, Elizaveta S; Rush, Jason S; Durney, Michael A; Cao, Zhifang; Dančík, Vlado; Chittick, Benjamin; Wu, Huixian; Petrone, Adam; Bittker, Joshua A; Phillips, Andrew; Perez, Jose R; Shamji, Alykhan F; Kaushik, Virendar K; Daly, Mark J; Graham, Daniel B; Schreiber, Stuart L; Xavier, Ramnik J

2017-10-24

Advances in human genetics have dramatically expanded our understanding of complex heritable diseases. Genome-wide association studies have identified an allelic series of CARD9 variants associated with increased risk of or protection from inflammatory bowel disease (IBD). The predisposing variant of CARD9 is associated with increased NF-κB-mediated cytokine production. Conversely, the protective variant lacks a functional C-terminal domain and is unable to recruit the E3 ubiquitin ligase TRIM62. Here, we used biochemical insights into CARD9 variant proteins to create a blueprint for IBD therapeutics and recapitulated the mechanism of the CARD9 protective variant using small molecules. We developed a multiplexed bead-based technology to screen compounds for disruption of the CARD9-TRIM62 interaction. We identified compounds that directly and selectively bind CARD9, disrupt TRIM62 recruitment, inhibit TRIM62-mediated ubiquitinylation of CARD9, and demonstrate cellular activity and selectivity in CARD9-dependent pathways. Taken together, small molecules targeting CARD9 illustrate a path toward improved IBD therapeutics. Published under the PNAS license.

On-Orbit 3-Dimensional Electrostatic Detumble for Generic Spacecraft Geometries

NASA Astrophysics Data System (ADS)

Bennett, Trevor J.

In recent years, there is a growing interest in active debris removal and on-orbit servicing of Earth orbiting assets. The growing need for such approaches is often exemplified by the Iridium-Kosmos collision in 2009 that generated thousands of debris fragments. There exists a variety of active debris removal and on-orbit servicing technologies in development. Conventional docking mechanisms and mechanical capture by actuated manipulators, exemplified by NASA's Restore-L mission, require slow target tumble rates or more aggressive circumnavigation rate matching. The tumble rate limitations can be overcome with flexible capture systems such nets, harpoons, or tethers yet these systems require complex deployment, towing, and/or interfacing strategies to avoid servicer and target damage. Alternatively, touchless methods overcome the tumble rate limitations by provide detumble control prior to a mechanical interface. This thesis explores electrostatic detumble technology to touchlessly reduce large target rotation rates of Geostationary satellites and debris. The technical challenges preceding flight implementation largely reside in the long-duration formation flying guidance, navigation, and control of a servicer spacecraft equipped with electrostatic charge transfer capability. Leveraging prior research into the electrostatic charging of spacecraft, electrostatic detumble control formulations are developed for both axisymmetric and generic target geometries. A novel relative position vector and associated relative orbit control approach is created to manage the long-duration proximity operations. Through detailed numerical simulations, the proposed detumble and relative motion control formulations demonstrate detumble of several thousand kilogram spacecraft tumbling at several degrees per second in only several days. The availability, either through modeling or sensing, of the relative attitude, relative position, and electrostatic potential are among key concerns with implementation of electrostatic detumble control on-orbit. Leveraging an extended Kalman filter scheme, the relative position information is readily obtained. In order to touchlessly acquire the target electrostatic potential, a nested two-time scale Kalman filter is employed to provide real-time estimates of both relative position and electrostatic potential while on-orbit. The culmination of the presented control formulations for generic spacecraft geometries, the proximity and formation flying control capability, and the availability of necessary state information provide significant contributions towards the viability of electrostatic detumble mission concepts.

Advances in genetic engineering of the avian genome: "Realising the promise".

PubMed

Doran, Timothy J; Cooper, Caitlin A; Jenkins, Kristie A; Tizard, Mark L V

2016-06-01

This review provides an historic perspective of the key steps from those reported at the 1st Transgenic Animal Research Conference in 1997 through to the very latest developments in avian transgenesis. Eighteen years later, on the occasion of the 10th conference in this series, we have seen breakthrough advances in the use of viral vectors and transposons to transform the germline via the direct manipulation of the chicken embryo, through to the establishment of PGC cultures allowing in vitro modification, expansion into populations to analyse the genetic modifications and then injection of these cells into embryos to create germline chimeras. We have now reached an unprecedented time in the history of chicken transgenic research where we have the technology to introduce precise, targeted modifications into the chicken genome, ranging from; new transgenes that provide improved phenotypes such as increased resilience to economically important diseases; the targeted disruption of immunoglobulin genes and replacement with human sequences to generate transgenic chickens that express "humanised" antibodies for biopharming; and the deletion of specific nucleotides to generate targeted gene knockout chickens for functional genomics. The impact of these advances is set to be realised through applications in chickens, and other bird species as models in scientific research, for novel biotechnology and to protect and improve agricultural productivity.

Characterization of the OPAL LiDAR under controlled obscurant conditions

NASA Astrophysics Data System (ADS)

Cao, Xiaoying; Church, Philip; Matheson, Justin

2016-05-01

Neptec Technologies' OPAL-120 3D LiDAR is optimized for obscurant penetration. The OPAL-120 uses a scanning mechanism based on the Risley prism pair. The scan patterns are created by rotating two prisms under independent motor control. The geometry and material properties of the prisms define the conical field-of-view of the sensor, which can be built to between 60 to 120 degrees. The OPAL-120 was recently evaluated using a controlled obscurant chamber capable of generating clouds of obscurants over a depth of 22m. Obscurants used in this investigation include: Arizona road dust, water fog, and fog-oil. The obscurant cloud optical densities were monitored with a transmissometer. Optical depths values ranged from an upper value of 6 and progressively decreased to 0. Targets were positioned at the back of the obscurant chamber at a distance of 60m from the LiDAR. The targets are made of a foreground array of equally spaced painted wood stripes in front of a solid background. Reflectivity contrasts were achieved with foreground/background combinations of white/white, white/black and black/white. Data analysis will be presented on the effect of optical densities on range and cross-range resolution, and accuracy. The analysis includes the combinations of all obscurant types and target reflectivity contrasts.

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, TNT DETECTION TECHNOLOGY, TEXAS INSTRUMENTS, SPREETA TM SENSOR

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, CLEAN ENVIRONMENT EQUIPMENT, SAMPLEASE BLADDER PUMP

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the...

The SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION program - Technology Profiles

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) program was created to evaluate new and promising treatment technologies for cleanup at hazardous waste sites. The mission of the SITE program is to encourage the development and routine use of innovative treatment technologie...

Environmental Technology Verification Report - NATCO Group, Inc. – Paques THIOPAQ Gas Purification Technology

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification (ETV) program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, BURGE ENVIRONMENTAL INC. MULTIPROBE 100

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the...

A Unified Information System for Appropriate Technology.

ERIC Educational Resources Information Center

Unamboowe, Ira

1980-01-01

Considers problems and solutions for transfer of technological information for developing nations. Imbalances created by industrial growth have brought the concept of choice of technologies to the forefront of national objectives. (RAA)

What Is Educational Technology? An Inquiry into the Meaning, Use, and Reciprocity of Technology

ERIC Educational Resources Information Center

Lakhana, Arun

2014-01-01

This position paper explores the ambiguity of technology, toward refined understanding of Educational Technology. The purpose of education is described by John Dewey as growing, or habitual learning. Two philosophical conceptions of technology are reviewed. Dewey positions inquiry as a technology that creates knowledge. Val Dusek offers a…

Developing Indicators for a Classroom Observation Tool on Pedagogy and Technology Integration: A Delphi Study

ERIC Educational Resources Information Center

Elmendorf, Douglas C.; Song, Liyan

2015-01-01

Rapid advances in technology and increased access to technology tools have created new instructional demands and expectations on teachers. Due to the ubiquitous presence of technology in K-12 schools, teachers are being observed on both their pedagogical and technology integration practices. Applying the technological pedagogical and content…

Recent development of mass spectrometry and proteomics applications in identification and typing of bacteria

PubMed Central

Chui, Huixia; Domish, Larissa; Hernandez, Drexler; Wang, Gehua

2016-01-01

Identification and typing of bacteria occupy a large fraction of time and work in clinical microbiology laboratories. With the certification of some MS platforms in recent years, more applications and tests of MS‐based diagnosis methods for bacteria identification and typing have been created, not only on well‐accepted MALDI‐TOF‐MS‐based fingerprint matches, but also on solving the insufficiencies of MALDI‐TOF‐MS‐based platforms and advancing the technology to areas such as targeted MS identification and typing of bacteria, bacterial toxin identification, antibiotics susceptibility/resistance tests, and MS‐based diagnostic method development on unique bacteria such as Clostridium and Mycobacteria. This review summarizes the recent development in MS platforms and applications in bacteria identification and typing of common pathogenic bacteria. PMID:26751976

Implementing a modeling software for animated protein-complex interactions using a physics simulation library.

PubMed

Ueno, Yutaka; Ito, Shuntaro; Konagaya, Akihiko

2014-12-01

To better understand the behaviors and structural dynamics of proteins within a cell, novel software tools are being developed that can create molecular animations based on the findings of structural biology. This study proposes our method developed based on our prototypes to detect collisions and examine the soft-body dynamics of molecular models. The code was implemented with a software development toolkit for rigid-body dynamics simulation and a three-dimensional graphics library. The essential functions of the target software system included the basic molecular modeling environment, collision detection in the molecular models, and physical simulations of the movement of the model. Taking advantage of recent software technologies such as physics simulation modules and interpreted scripting language, the functions required for accurate and meaningful molecular animation were implemented efficiently.

From boundaries to boundary work: middle managers creating inter-organizational change.

PubMed

Oldenhof, Lieke; Stoopendaal, Annemiek; Putters, Kim

2016-11-21

Purpose In healthcare, organizational boundaries are often viewed as barriers to change. The purpose of this paper is to show how middle managers create inter-organizational change by doing boundary work: the dual act of redrawing boundaries and coordinating work in new ways. Design/methodology/approach Theoretically, the paper draws on the concept of boundary work from Science and Technology Studies. Empirically, the paper is based on an ethnographic investigation of middle managers that participate in a Dutch reform program across health, social care, and housing. Findings The findings show how middle managers create a sense of urgency for inter-organizational change by emphasizing "fragmented" service provision due to professional, sectoral, financial, and geographical boundaries. Rather than eradicating these boundaries, middle managers change the status quo gradually by redrawing composite boundaries. They use boundary objects and a boundary-transcending vocabulary emphasizing the need for societal gains that go beyond production targets of individual organizations. As a result, work is coordinated in new ways in neighborhood teams and professional expertise is being reconfigured. Research limitations/implications Since boundary workers create incremental change, it is necessary to follow their work for a longer period to assess whether boundary work contributes to paradigm change. Practical implications Organizations should pay attention to conditions for boundary work, such as legitimacy of boundary workers and the availability of boundary spaces that function as communities of practice. Originality/value By shifting the focus from boundaries to boundary work, this paper gives valuable insights into "how" boundaries are redrawn and embodied in objects and language.

Unleashing the Future: Educators "Speak Up" about the Use of Emerging Technologies for Learning. Speak Up 2009 National Findings: Teachers, Aspiring Teachers & Administrators

ERIC Educational Resources Information Center

Project Tomorrow, 2010

2010-01-01

Technology has enabled students to have greater access to vast array of resources, classes and experts; empowering students to become "Free Agent Learners" who are creating meaningful personalized learning experiences 24/7 outside of the traditional classroom and school structure. In the report "Creating our Future: Students Speak Up about their…

A Multi-Case Study of Research Using Mobile Imaging, Sensing and Tracking Technologies to Objectively Measure Behavior: Ethical Issues and Insights to Guide Responsible Research Practice

ERIC Educational Resources Information Center

Nebeker, Camille; Linares-Orozco, Rubi; Crist, Katie

2015-01-01

Introduction: The increased availability of mobile sensing technologies is creating a paradigm shift for health research by creating new opportunities for measuring and monitoring behavior. For example, researchers can now collect objective information about a participant's daily activity using wearable devices that have: 1- Global Positioning…

Creating Digital Elevation Model Using a Mobile Device

NASA Astrophysics Data System (ADS)

Durmaz, A. İ.

2017-11-01

DEM (Digital Elevation Models) is the best way to interpret topography on the ground. In recent years, lidar technology allows to create more accurate elevation models. However, the problem is this technology is not common all over the world. Also if Lidar data are not provided by government agencies freely, people have to pay lots of money to reach these point clouds. In this article, we will discuss how we can create digital elevation model from less accurate mobile devices' GPS data. Moreover, we will evaluate these data on the same mobile device which we collected data to reduce cost of this modeling.

Marketing NASA Langley Polymeric Materials

NASA Technical Reports Server (NTRS)

Flynn, Diane M.

1995-01-01

A marketing tool was created to expand the knowledge of LaRC developed polymeric materials, in order to facilitate the technology transfer process and increase technology commercialization awareness among a non-technical audience. The created brochure features four materials, LaRC-CP, LaRC-RP46, LaRC-SI, and LaRC-IA, and highlights their competitive strengths in potential commercial applications. Excellent opportunities exist in the $40 million per year microelectronics market and the $6 billion adhesives market. It is hoped that the created brochure will generate inquiries regarding the use of the above materials in markets such as these.

User-Centered Design of a Tablet Waiting Room Tool for Complex Patients to Prioritize Discussion Topics for Primary Care Visits.

PubMed

Lyles, Courtney R; Altschuler, Andrea; Chawla, Neetu; Kowalski, Christine; McQuillan, Deanna; Bayliss, Elizabeth; Heisler, Michele; Grant, Richard W

2016-09-14

Complex patients with multiple chronic conditions often face significant challenges communicating and coordinating with their primary care physicians. These challenges are exacerbated by the limited time allotted to primary care visits. Our aim was to employ a user-centered design process to create a tablet tool for use by patients for visit discussion prioritization. We employed user-centered design methods to create a tablet-based waiting room tool that enables complex patients to identify and set discussion topic priorities for their primary care visit. In an iterative design process, we completed one-on-one interviews with 40 patients and their 17 primary care providers, followed by three design sessions with a 12-patient group. We audiorecorded and transcribed all discussions and categorized major themes. In addition, we met with 15 key health communication, education, and technology leaders within our health system to further review the design and plan for broader implementation of the tool. In this paper, we present the significant changes made to the tablet tool at each phase of this design work. Patient feedback emphasized the need to make the tablet tool accessible for patients who lacked technical proficiency and to reduce the quantity and complexity of text presentation. Both patients and their providers identified specific content choices based on their personal experiences (eg, the ability to raise private or sensitive concerns) and recommended targeting new patients. Stakeholder groups provided essential input on the need to augment text with video and to create different versions of the videos to match sex and race/ethnicity of the actors with patients. User-centered design in collaboration with patients, providers, and key health stakeholders led to marked evolution in the initial content, layout, and target audience for a tablet waiting room tool intended to assist complex patients with setting visit discussion priorities.

Dissociable identity- and modality-specific neural representations as revealed by cross-modal nonspatial inhibition of return.

PubMed

Chi, Yukai; Yue, Zhenzhu; Liu, Yupin; Mo, Lei; Chen, Qi

2014-08-01

There are ongoing debates on whether object concepts are coded as supramodal identity-based or modality-specific representations in the human brain. In this fMRI study, we adopted a cross-modal "prime-neutral cue-target" semantic priming paradigm, in which the prime-target relationship was manipulated along both the identity and the modality dimensions. The prime and the target could refer to either the same or different semantic identities, and could be delivered via either the same or different sensory modalities. By calculating the main effects and interactions of this 2 (identity cue validity: "Identity_Cued" vs. "Identity_Uncued") × 2 (modality cue validity: "Modality_Cued" vs. "Modality_Uncued") factorial design, we aimed at dissociating three neural networks involved in creating novel identity-specific representations independent of sensory modality, in creating modality-specific representations independent of semantic identity, and in evaluating changes of an object along both the identity and the modality dimensions, respectively. Our results suggested that bilateral lateral occipital cortex was involved in creating a new supramodal semantic representation irrespective of the input modality, left dorsal premotor cortex, and left intraparietal sulcus were involved in creating a new modality-specific representation irrespective of its semantic identity, and bilateral superior temporal sulcus was involved in creating a representation when the identity and modality properties were both cued or both uncued. In addition, right inferior frontal gyrus showed enhanced neural activity only when both the identity and the modality of the target were new, indicating its functional role in novelty detection. Copyright © 2014 Wiley Periodicals, Inc.

Techno-Human Mesh: The Growing Power of Information Technologies.

ERIC Educational Resources Information Center

West, Cynthia K.

This book examines the intersection of information technologies, power, people, and bodies. It explores how information technologies are on a path of creating efficiency, productivity, profitability, surveillance, and control, and looks at the ways in which human-machine interface technologies, such as wearable computers, biometric technologies,…

Converging technologies in higher education: paradigm for the "new" liberal arts?

PubMed

Balmer, Robert T

2006-12-01

This article discusses the historic relationship between the practical arts (technology) and the mental (liberal) arts, suggesting that Converging Technologies is a new higher education paradigm that integrates the arts, humanities, and sciences with modern technology. It explains that the paradigm really includes all fields in higher education from philosophy to art to music to modern languages and beyond. To implement a transformation of this magnitude, it is necessary to understand the psychology of change in academia. Union College in Schenectady, New York, implemented a Converging Technologies Educational Paradigm in five steps: (1) create a compelling vision, (2) communicate the vision, (3) empower the faculty, (4) create short-term successes, and (5) institutionalize the results. This case study of Union College demonstrates it is possible to build a pillar of educational excellence based on Converging Technologies.

Multi-criteria development and incorporation into decision tools for health technology adoption.

PubMed

Poulin, Paule; Austen, Lea; Scott, Catherine M; Waddell, Cameron D; Dixon, Elijah; Poulin, Michelle; Lafrenière, René

2013-01-01

When introducing new health technologies, decision makers must integrate research evidence with local operational management information to guide decisions about whether and under what conditions the technology will be used. Multi-criteria decision analysis can support the adoption or prioritization of health interventions by using criteria to explicitly articulate the health organization's needs, limitations, and values in addition to evaluating evidence for safety and effectiveness. This paper seeks to describe the development of a framework to create agreed-upon criteria and decision tools to enhance a pre-existing local health technology assessment (HTA) decision support program. The authors compiled a list of published criteria from the literature, consulted with experts to refine the criteria list, and used a modified Delphi process with a group of key stakeholders to review, modify, and validate each criterion. In a workshop setting, the criteria were used to create decision tools. A set of user-validated criteria for new health technology evaluation and adoption was developed and integrated into the local HTA decision support program. Technology evaluation and decision guideline tools were created using these criteria to ensure that the decision process is systematic, consistent, and transparent. This framework can be used by others to develop decision-making criteria and tools to enhance similar technology adoption programs. The development of clear, user-validated criteria for evaluating new technologies adds a critical element to improve decision-making on technology adoption, and the decision tools ensure consistency, transparency, and real-world relevance.

Leveraging information technology to drive improvement in patient satisfaction.

PubMed

Nash, Mary; Pestrue, Justin; Geier, Peter; Sharp, Karen; Helder, Amy; McAlearney, Ann Scheck

2010-01-01

A healthcare organization's commitment to quality and the patient experience requires senior leader involvement in improvement strategies, and accountability for goals. Further, improvement strategies are most effective when driven by data, and in the world of patient satisfaction, evidence is growing that nurse leader rounding and discharge calls are strategic tactics that can improve patient satisfaction. This article describes how The Ohio State University Medical Center (OSUMC) leveraged health information technology (IT) to apply a data-driven strategy execution to improve the patient experience. Specifically, two IT-driven approaches were used: (1) business intelligence reporting tools were used to create a meaningful reporting system including dashboards, scorecards, and tracking reports and (2) an improvement plan was implemented that focused on two high-impact tactics and data to hardwire accountability. Targeted information from the IT systems enabled clinicians and administrators to execute these strategic tactics, and senior leaders to monitor achievement of strategic goals. As a result, OSUMC's inpatient satisfaction scores on the Hospital Consumer Assessment of Healthcare Providers and Systems survey improved from 56% nines and tens in 2006 to 71% in 2009. © 2010 National Association for Healthcare Quality.

Secure transport and adaptation of MC-EZBC video utilizing H.264-based transport protocols☆

PubMed Central

Hellwagner, Hermann; Hofbauer, Heinz; Kuschnig, Robert; Stütz, Thomas; Uhl, Andreas

2012-01-01

Universal Multimedia Access (UMA) calls for solutions where content is created once and subsequently adapted to given requirements. With regard to UMA and scalability, which is required often due to a wide variety of end clients, the best suited codecs are wavelet based (like the MC-EZBC) due to their inherent high number of scaling options. However, most transport technologies for delivering videos to end clients are targeted toward the H.264/AVC standard or, if scalability is required, the H.264/SVC. In this paper we will introduce a mapping of the MC-EZBC bitstream to existing H.264/SVC based streaming and scaling protocols. This enables the use of highly scalable wavelet based codecs on the one hand and the utilization of already existing network technologies without accruing high implementation costs on the other hand. Furthermore, we will evaluate different scaling options in order to choose the best option for given requirements. Additionally, we will evaluate different encryption options based on transport and bitstream encryption for use cases where digital rights management is required. PMID:26869746

Design of 3-D Printed Concentric Tube Robots

PubMed Central

Morimoto, Tania K.; Okamura, Allison M.

2017-01-01

Concentric tube surgical robots are minimally invasive devices with the advantages of snake-like reconfigurability, long and thin form factor, and placement of actuation outside the patient’s body. These robots can also be designed and manufactured to acquire targets in specific patients for treating specific diseases in a manner that minimizes invasiveness. We propose that concentric tube robots can be manufactured using 3-D printing technology on a patient- and procedure-specific basis. In this paper, we define the design requirements and manufacturing constraints for 3-D printed concentric tube robots and experimentally demonstrate the capabilities of these robots. While numerous 3-D printing technologies and materials can be used to create such robots, one successful example uses selective laser sintering to make an outer tube with a polyether block amide and uses stereolithography to make an inner tube with a polypropylene-like material. This enables a tube pair with precurvatures of 0.0775 and 0.0455 mm−1, which can withstand strains of 20% and 5.5% for the outer and inner tubes, respectively. PMID:28713227

The future of management: The NASA paradigm

NASA Technical Reports Server (NTRS)

Harris, Philip R.

1992-01-01

Prototypes of 21st century management, especially for large scale enterprises, may well be found within the aerospace industry. The space era inaugurated a number of projects of such scope and magnitude that another type of management had to be created to ensure successful achievement. The challenges will be not just in terms of technology and its management, but also human and cultural in dimension. Futurists, students of management, and those concerned with technological administration would do well to review the literature of emerging space management for its wider implications. NASA offers a paradigm, or demonstrated model, of future trends in the field of management at large. More research is needed on issues of leadership for Earth based project in space and space based programs with managers there. It is needed to realize that large scale technical enterprises, such as are undertaken in space, require a new form of management. NASA and other responsible agencies are urged to study excellence in space macromanagement, including the necessary multidisciplinary skills. Two recommended targets are the application of general living systems theory and macromanagement concepts for space stations in the 1990s.

Economic evaluation of pharmacogenomics: a value-based approach to pragmatic decision making in the face of complexity.

PubMed

Snyder, Susan R; Mitropoulou, Christina; Patrinos, George P; Williams, Marc S

2014-01-01

Evidence of the value of pharmacogenomic testing is needed to inform policymakers and clinicians for decision making related to adoption and coverage, and to facilitate prioritization for research and development. Pharmacogenomics has an important role in creating a more efficient healthcare system, and this article addresses how economic evaluation can strategically target evidence gaps for public health priorities with examples from pharmacogenomic medicine. This article begins with a review of the need for and use of economic evaluations in value-based decision making for pharmacogenomic testing. Three important gaps are described with examples demonstrating how they can be addressed: (1) projected impact of hypothetical new technology, (2) pre-implementation assessment of a specific technology, and (3) post-implementation assessment from relevant analytical stakeholder perspectives. Additional needs, challenges and approaches specific to pharmacogenomic economic evaluation in the developing world are also identified. These pragmatic approaches can provide much needed evidence to support real-world value-based decision making for pharmacogenomic-based screening and treatment strategies. © 2014 S. Karger AG, Basel.

Peeking Beneath the Caldera: Communicating Subsurface Knowledge of Newberry Volcano

NASA Astrophysics Data System (ADS)

Mark-Moser, M.; Rose, K.; Schultz, J.; Cameron, E.

2016-12-01

"Imaging the Subsurface: Enhanced Geothermal Systems and Exploring Beneath Newberry Volcano" is an interactive website that presents a three-dimensional subsurface model of Newberry Volcano developed at National Energy Technology Laboratory (NETL). Created using the Story Maps application by ArcGIS Online, this format's dynamic capabilities provide the user the opportunity for multimedia engagement with the datasets and information used to build the subsurface model. This website allows for an interactive experience that the user dictates, including interactive maps, instructive videos and video capture of the subsurface model, and linked information throughout the text. This Story Map offers a general background on the technology of enhanced geothermal systems and the geologic and development history of Newberry Volcano before presenting NETL's modeling efforts that support the installation of enhanced geothermal systems. The model is driven by multiple geologic and geophysical datasets to compare and contrast results which allow for the targeting of potential EGS sites and the reduction of subsurface uncertainty. This Story Map aims to communicate to a broad audience, and provides a platform to effectively introduce the model to researchers and stakeholders.

Case Study of a Small Scale Polytechnic Entrepreneurship Capstone Course Sequence

ERIC Educational Resources Information Center

Webster, Rustin D.; Kopp, Richard

2017-01-01

A multidisciplinary entrepreneurial senior capstone has been created for engineering technology students at a research I land-grant university statewide extension. The two semester course sequence welcomes students from Mechanical Engineering Technology, Electrical Engineering Technology, Computer Graphics Technology, and Organizational…

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT: BAGHOUSE FILTRATION PRODUCTS--DONALDSON COMPANY, INC. 6277 FILTRATION MEDIA

EPA Science Inventory

The U.S. Environmental Protection Agency has created the Environmental Technology Verification Program to facilitate the deployment of innovative or improved environmental technologies through high quality, peer reviewed data on technology performance to those involved in the des...

Environmental Technology Verification Report -- Baghouse filtration products, GE Energy QG061 filtration media ( tested May 2007)

EPA Science Inventory

EPA has created the Environmental Technology Verification Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The Air Pollution Control Technology Verification Center, a cente...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, GEOLOG, INC., MICRO-FLO BLADDER PUMP MODEL 57400

EPA Science Inventory

The U.S. Environmental Protection Agency has created the Environmental Technology Verification Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ETV Program...

Low carbon and clean energy scenarios for India: Analysis of targets approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shukla, Priyadarshi R.; Chaturvedi, Vaibhav

2012-12-01

Low carbon energy technologies are gaining increasing importance in India for reducing emissions as well as diversifying its energy supply mix. The present paper presents and analyses a targeted approach for pushing solar, wind and nuclear technologies in the Indian energy market. Targets for these technologies have been constructed on the basis of Indian government documents, policy announcements and expert opinion. Different targets have been set for the reference scenario and the carbon price scenario. In the reference scenario it is found that in the long run all solar, wind and nuclear will achieve their targets without any subsidy push.more » In the short run however, nuclear and solar energy require significant subsidy push. Nuclear energy requires a much higher subsidy allocation as compared to solar because the targets assumed are also higher for nuclear energy. Under a carbon price scenario, the carbon price drives the penetration of these technologies significantly. Still subsidy is required especially in the short run when the carbon price is low. It is also found that pushing solar, wind and nuclear technologies might lead to decrease in share of CCS under the price scenario and biomass under both BAU and price scenario, which implies that one set of low carbon technologies is substituted by other set of low carbon technologies. Thus the objective of emission mitigation might not be achieved due to this substitution. Moreover sensitivity on nuclear energy cost was done to represent risk mitigation for this technology and it was found that higher cost can significantly decrease the share of this technology under both the BAU and carbon price scenario.« less

As Technologies for Nucleotide Therapeutics Mature, Products Emerge.

PubMed

Beierlein, Jennifer M; McNamee, Laura M; Ledley, Fred D

2017-12-15

The long path from initial research on oligonucleotide therapies to approval of antisense products is not unfamiliar. This lag resembles those encountered with monoclonal antibodies, gene therapies, and many biological targets and is consistent with studies of innovation showing that technology maturation is a critical determinant of product success. We previously described an analytical model for the maturation of biomedical research, demonstrating that the efficiency of targeted and biological development is connected to metrics of technology growth. The present work applies this model to characterize the advance of oligonucleotide therapeutics. We show that recent oligonucleotide product approvals incorporate technologies and targets that are past the established point of technology growth, as do most of the oligonucleotide products currently in phase 3. Less mature oligonucleotide technologies, such as miRNAs and some novel gene targets, have not passed the established point and have not yielded products. This analysis shows that oligonucleotide product development has followed largely predictable patterns of innovation. While technology maturation alone does not ensure success, these data show that many oligonucleotide technologies are sufficiently mature to be considered part of the arsenal for therapeutic development. These results demonstrate the importance of technology assessment in strategic management of biomedical technologies. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Celebrating the International Year of Light in Michigan

NASA Astrophysics Data System (ADS)

Sala, Anca L.; Dreyer, Elizabeth F. C.; Aku-Leh, Cynthia; Jones, Timothy; Nees, John A.; Smith, Arlene

2016-09-01

The 2015 International Year of Light created a wonderful opportunity to bring light and optics events and activities to people of all ages and occupations in Michigan. A large spectrum of events took place; from events held in schools, colleges, and universities targeting various groups of students, to events associated with festivals attended by large crowds. The latter included the Ann Arbor Summer Festival held in June and the Flint Back-to-the-Bricks Festival in August. All events included interactive activities where participants learned hands-on about optics and photonics phenomena and applications. Original demonstrations and kits were developed by the Ann Arbor OSA Local Section and the Optics Society at the University of Michigan, the joint OSA/SPIE student chapter, for use during the events. The activities were funded through the student chapter's SPIE grant for IYL outreach events and corporate sponsorships. Under the name Michigan Light Project, these groups along with local technology enthusiasts and science clubs delivered several events across Michigan. Other events took place throughout the year in Mid-Michigan through the efforts of faculty and students in the Photonics and Laser Technology program at Baker College of Flint. The outreach events targeted students in K-12. Teachers, counselors, and parents also learned about the importance of optics and photonics in society. The activities developed will continue this year and in the future. The paper will provide details on the completed events and activities along with tips for implementing similar activities and outreach partnerships in other areas.

Cell-Based Selection Expands the Utility of DNA-Encoded Small-Molecule Library Technology to Cell Surface Drug Targets: Identification of Novel Antagonists of the NK3 Tachykinin Receptor.

PubMed

Wu, Zining; Graybill, Todd L; Zeng, Xin; Platchek, Michael; Zhang, Jean; Bodmer, Vera Q; Wisnoski, David D; Deng, Jianghe; Coppo, Frank T; Yao, Gang; Tamburino, Alex; Scavello, Genaro; Franklin, G Joseph; Mataruse, Sibongile; Bedard, Katie L; Ding, Yun; Chai, Jing; Summerfield, Jennifer; Centrella, Paolo A; Messer, Jeffrey A; Pope, Andrew J; Israel, David I

2015-12-14

DNA-encoded small-molecule library technology has recently emerged as a new paradigm for identifying ligands against drug targets. To date, this technology has been used with soluble protein targets that are produced and used in a purified state. Here, we describe a cell-based method for identifying small-molecule ligands from DNA-encoded libraries against integral membrane protein targets. We use this method to identify novel, potent, and specific inhibitors of NK3, a member of the tachykinin family of G-protein coupled receptors (GPCRs). The method is simple and broadly applicable to other GPCRs and integral membrane proteins. We have extended the application of DNA-encoded library technology to membrane-associated targets and demonstrate the feasibility of selecting DNA-tagged, small-molecule ligands from complex combinatorial libraries against targets in a heterogeneous milieu, such as the surface of a cell.

Trapped between two tails: trading off scientific uncertainties via climate targets

NASA Astrophysics Data System (ADS)

Lemoine, Derek; McJeon, Haewon C.

2013-09-01

Climate change policies must trade off uncertainties about future warming, about the social and ecological impacts of warming, and about the cost of reducing greenhouse gas emissions. We show that laxer carbon targets produce broader distributions for climate damages, skewed towards severe outcomes. However, if potential low-carbon technologies fill overlapping niches, then more stringent carbon targets produce broader distributions for the cost of reducing emissions, skewed towards high-cost outcomes. We use the technology-rich GCAM integrated assessment model to assess the robustness of 450 and 500 ppm carbon targets to each uncertain factor. The 500 ppm target provides net benefits across a broad range of futures. The 450 ppm target provides net benefits only when impacts are greater than conventionally assumed, when multiple technological breakthroughs lower the cost of abatement, or when evaluated with a low discount rate. Policy evaluations are more sensitive to uncertainty about abatement technology and impacts than to uncertainty about warming.

Trapped Between Two Tails: Trading Off Scientific Uncertainties via Climate Targets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lemoine, Derek M.; McJeon, Haewon C.

2013-08-20

Climate change policies must trade off uncertainties about future warming, about the social and ecological impacts of warming, and about the cost of reducing greenhouse gas emissions. We show that laxer carbon targets produce broader distributions for climate damages, skewed towards severe outcomes. However, if potential low-carbon technologies fill overlapping niches, then more stringent carbon targets produce broader distributions for the cost of reducing emissions, skewed towards high-cost outcomes. We use the technology- rich GCAM integrated assessment model to assess the robustness of 450 ppm and 500 ppm carbon targets to each uncertain factor. The 500 ppm target provides netmore » benefits across a broad range of futures. The 450 ppm target provides net benefits only when impacts are greater than conventionally assumed, when multiple technological breakthroughs lower the cost of abatement, or when evaluated with a low discount rate. Policy evaluations are more sensitive to uncertainty about abatement technology and impacts than to uncertainty about warming.« less

The Ultimate Destination: Choice of Interplanetary Exploration Path can define Future of Interstellar Spaceflight

NASA Astrophysics Data System (ADS)

Silin, D. V.

Manned interstellar spaceflight is facing multiple challenges of great magnitude; among them are extremely large distances and the lack of known habitable planets other than Earth. Many of these challenges are applicable to manned space exploration within the Solar System to the same or lesser degree. If these issues are resolved on an interplanetary scale, better position to pursue interstellar exploration can be reached. However, very little progress (if any) was achieved in manned space exploration since the end of Space Race. There is no lack of proposed missions, but all of them require considerable technological and financial efforts to implement while yielding no tangible benefits that would justify their costs. To overcome this obstacle highest priority in future space exploration plans should be assigned to the creation of added value in outer space. This goal can be reached if reductions in space transportation, construction and maintenance of space-based structures costs are achieved. In order to achieve these requirements several key technologies have to be mastered, such as near-Earth object mining, space- based manufacturing, agriculture and structure assembly. To keep cost and difficulty under control next exploration steps can be limited to nearby destinations such as geostationary orbit, low lunar orbit, Moon surface and Sun-Earth L1 vicinity. Completion of such a program will create a solid foundation for further exploration and colonization of the Solar System, solve common challenges of interplanetary and interstellar spaceflight and create useful results for the majority of human population. Another important result is that perception of suitable destinations for interstellar missions will change significantly. If it becomes possible to create habitable and self-sufficient artificial environments in the nearby interplanetary space, Earth-like habitable planets will be no longer required to expand beyond our Solar System. Large fraction of the stars in the observable Universe will become valid targets for interstellar missions.

Human brain MRI at 500 MHz, scientific perspectives and technological challenges

NASA Astrophysics Data System (ADS)

Le Bihan, Denis; Schild, Thierry

2017-03-01

The understanding of the human brain is one of the main scientific challenges of the 21st century. In the early 2000s the French Alternative Energies and Atomic Energy Commission launched a program to conceive and build a ‘human brain explorer’, the first human MRI scanner operating at 11.7 T. This scanner was envisioned to be part of the ambitious French-German project Iseult, bridging together industrial and academic partners to push the limits of molecular neuroimaging, from mouse to man, using ultra-high field MRI. In this article we provide a summary of the main neuroscience and medical targets of the Iseult project, mainly to acquire within timescales compatible with human tolerances images at a scale of 100 μm at which everything remains to discover, and to create new approaches to develop new imaging biomarkers for specific neurological and psychiatric disorders. The system specifications, the technological challenges, in terms of magnet design, winding technology, cryogenics, quench protection, stability control, and the solutions which have been chosen to overcome them and build this outstanding instrument are provided. Lines of the research and development which will be necessary to fully exploit the potential of this and other UHF MRI scanners are also outlined.

UCMP and the Internet help hospital libraries share resources.

PubMed

Dempsey, R; Weinstein, L

1999-07-01

The Medical Library Center of New York (MLCNY), a medical library consortium founded in 1959, has specialized in supporting resource sharing and fostering technological advances. In 1961, MLCNY developed and continues to maintain the Union Catalog of Medical Periodicals (UCMP), a resource tool including detailed data about the collections of more than 720 medical library participants. UCMP was one of the first library tools to capitalize on the benefits of computer technology and, from the beginning, invited hospital libraries to play a substantial role in its development. UCMP, beginning with products in print and later in microfiche, helped to create a new resource sharing environment. Today, UCMP continues to capitalize on new technology by providing access via the Internet and an Oracle-based search system providing subscribers with the benefits of: a database that contains serial holdings information on an issue specific level, a database that can be updated in real time, a system that provides multi-type searching and allows users to define how the results will be sorted, and an ordering function that can more precisely target libraries that have a specific issue of a medical journal. Current development of a Web-based system will ensure that UCMP continues to provide cost effective and efficient resource sharing in future years.

UCMP and the Internet help hospital libraries share resources.

PubMed Central

Dempsey, R; Weinstein, L

1999-01-01

The Medical Library Center of New York (MLCNY), a medical library consortium founded in 1959, has specialized in supporting resource sharing and fostering technological advances. In 1961, MLCNY developed and continues to maintain the Union Catalog of Medical Periodicals (UCMP), a resource tool including detailed data about the collections of more than 720 medical library participants. UCMP was one of the first library tools to capitalize on the benefits of computer technology and, from the beginning, invited hospital libraries to play a substantial role in its development. UCMP, beginning with products in print and later in microfiche, helped to create a new resource sharing environment. Today, UCMP continues to capitalize on new technology by providing access via the Internet and an Oracle-based search system providing subscribers with the benefits of: a database that contains serial holdings information on an issue specific level, a database that can be updated in real time, a system that provides multi-type searching and allows users to define how the results will be sorted, and an ordering function that can more precisely target libraries that have a specific issue of a medical journal. Current development of a Web-based system will ensure that UCMP continues to provide cost effective and efficient resource sharing in future years. PMID:10427426

Applications and challenges of next-generation sequencing in Brassica species.

PubMed

Wei, Lijuan; Xiao, Meili; Hayward, Alice; Fu, Donghui

2013-12-01

Next-generation sequencing (NGS) produces numerous (often millions) short DNA sequence reads, typically varying between 25 and 400 bp in length, at a relatively low cost and in a short time. This revolutionary technology is being increasingly applied in whole-genome, transcriptome, epigenome and small RNA sequencing, molecular marker and gene discovery, comparative and evolutionary genomics, and association studies. The Brassica genus comprises some of the most agro-economically important crops, providing abundant vegetables, condiments, fodder, oil and medicinal products. Many Brassica species have undergone the process of polyploidization, which makes their genomes exceptionally complex and can create difficulties in genomics research. NGS injects new vigor into Brassica research, yet also faces specific challenges in the analysis of complex crop genomes and traits. In this article, we review the advantages and limitations of different NGS technologies and their applications and challenges, using Brassica as an advanced model system for agronomically important, polyploid crops. Specifically, we focus on the use of NGS for genome resequencing, transcriptome sequencing, development of single-nucleotide polymorphism markers, and identification of novel microRNAs and their targets. We present trends and advances in NGS technology in relation to Brassica crop improvement, with wide application for sophisticated genomics research into agronomically important polyploid crops.

Technological Literacy for All: A Course Designed to Raise the Technological Literacy of College Students

ERIC Educational Resources Information Center

Baskette, Kimberly G.; Fantz, Todd D.

2013-01-01

Understanding what technology is, and is not, is the first step in becoming technologically literate. One should also understand how technology is created, how it works, how it shapes society, and how society shapes technology. This study was designed to gauge the ability of a single-semester course to raise students' technological literacy as…

Commercializing Defense Technologies and Helping Defense Firms Succeed in Commercial Markets: A Report on the Objectives, Activities, and Accomplishments of the TAP-IN Program

NASA Technical Reports Server (NTRS)

1997-01-01

Technology Access for Product Innovation (TAP-IN), the largest technology deployment project funded by TRP, was competitively selected through a national solicitation for proposals. TAP-IN was created to help companies access and apply defense technologies and help defense-dependent companies enter new commercial markets. Defense technologies included technologies developed by DoD, DOE, NASA, and their contractors. TAP-IN was structured to provide region-based technology access services that were able to draw on technology resources nationwide. TAP-IN provided expert assistance in all stages of the commercialization process from concept through prototype design to capital sourcing and marketing strategy. TAP-IN helped companies locate new technology, identify business partners, secure financing, develop ideas for new products, identify new markets, license technology, solve technical problems, and develop company-specific applications of federal technology. TAP-IN leveraged NASA's existing commercial technology network to create an integrated national network of organizations that assisted companies in every state. In addition to NASA's six regional technology transfer centers (RTTCs), TAP-IN included business and technology development organizations in every state, the Industrial Designers Society of America, and the Federal Laboratory Consortium (FLC).

Puncturing the pipeline: Do technology companies alienate women in recruiting sessions?

PubMed

Wynn, Alison T; Correll, Shelley J

2018-02-01

A 'chilly' environment limits women's advancement through the educational pipeline leading to jobs in science and technology. However, we know relatively little about the environment women encounter after making it through the educational pipeline. Do technology companies create environments that may dampen women's interest at the juncture when they are launching their careers? Using original observational data from 84 recruiting sessions hosted by technology companies at a prominent university on the US West Coast, we find that company representatives often engage in behaviors that are known to create a chilly environment for women. Through gender-imbalanced presenter roles, geek culture references, overt use of gender stereotypes, and other gendered speech and actions, representatives may puncture the pipeline, lessening the interest of women at the point of recruitment into technology careers.

The Impact of a Technology Coordinator's Belief System upon Using Technology to Create a Community's History

ERIC Educational Resources Information Center

Waring, Scott M.

2010-01-01

As it has been shown that teachers of social studies content are less likely than teachers of other content areas to utilize technology in their classroom, this study focuses on one instructional technology coordinators' beliefs towards technology, instruction, and students and how these beliefs impacted how technology was utilized during a…

Leucine-rich-repeat-containing variable lymphocyte receptors as modules to target plant-expressed proteins

DOE PAGES

Velásquez, André C.; Nomura, Kinya; Cooper, Max D.; ...

2017-04-19

The ability to target and manipulate protein-based cellular processes would accelerate plant research; yet, the technology to specifically and selectively target plant-expressed proteins is still in its infancy. Leucine-rich repeats (LRRs) are ubiquitously present protein domains involved in mediating protein–protein interactions. LRRs confer the binding specificity to the highly diverse variable lymphocyte receptor (VLR) antibodies (including VLRA, VLRB and VLRC types) that jawless vertebrates make as the functional equivalents of jawed vertebrate immunoglobulin-based antibodies. Here, VLRBs targeting an effector protein from a plant pathogen, HopM1, were developed by immunizing lampreys and using yeast surface display to select for high-affinity VLRBs.more » HopM1-specific VLRBs (VLRM1) were expressed in planta in the cytosol, the trans-Golgi network, and the apoplast. Expression of VLRM1 was higher when the protein localized to an oxidizing environment that would favor disulfide bridge formation (when VLRM1 was not localized to the cytoplasm), as disulfide bonds are necessary for proper VLR folding. VLRM1 specifically interacted in planta with HopM1 but not with an unrelated bacterial effector protein while HopM1 failed to interact with a non-specific VLRB. Later, VLRs may be used as flexible modules to bind proteins or carbohydrates of interest in planta, with broad possibilities for their use by binding directly to their targets and inhibiting their action, or by creating chimeric proteins with new specificities in which endogenous LRR domains are replaced by those present in VLRs.« less

Leucine-rich-repeat-containing variable lymphocyte receptors as modules to target plant-expressed proteins

DOE Office of Scientific and Technical Information (OSTI.GOV)

Velásquez, André C.; Nomura, Kinya; Cooper, Max D.

The ability to target and manipulate protein-based cellular processes would accelerate plant research; yet, the technology to specifically and selectively target plant-expressed proteins is still in its infancy. Leucine-rich repeats (LRRs) are ubiquitously present protein domains involved in mediating protein–protein interactions. LRRs confer the binding specificity to the highly diverse variable lymphocyte receptor (VLR) antibodies (including VLRA, VLRB and VLRC types) that jawless vertebrates make as the functional equivalents of jawed vertebrate immunoglobulin-based antibodies. Here, VLRBs targeting an effector protein from a plant pathogen, HopM1, were developed by immunizing lampreys and using yeast surface display to select for high-affinity VLRBs.more » HopM1-specific VLRBs (VLRM1) were expressed in planta in the cytosol, the trans-Golgi network, and the apoplast. Expression of VLRM1 was higher when the protein localized to an oxidizing environment that would favor disulfide bridge formation (when VLRM1 was not localized to the cytoplasm), as disulfide bonds are necessary for proper VLR folding. VLRM1 specifically interacted in planta with HopM1 but not with an unrelated bacterial effector protein while HopM1 failed to interact with a non-specific VLRB. Later, VLRs may be used as flexible modules to bind proteins or carbohydrates of interest in planta, with broad possibilities for their use by binding directly to their targets and inhibiting their action, or by creating chimeric proteins with new specificities in which endogenous LRR domains are replaced by those present in VLRs.« less

Risk assessment of technologies for detecting illicit drugs in containers

NASA Astrophysics Data System (ADS)

Brandenstein, Albert E.

1995-03-01

This paper provides the highlights of the role risk assessment plays in the United States technology program for nonintrusive inspection of cargo containers for illicit drugs. The Counterdrug Technology Assessment Center is coordinating the national effort to develop prototype technologies for an advanced generation, nonintrusive cargo inspection system. In the future, the U.S. Customs Service could configure advanced technologies for finding not only drugs and other contraband hidden in cargo, but for a wide variety of commodities for customs duty verification purposes. The overall nonintrusive inspection system is envisioned to consist primarily of two classes of subsystems: (1) shipment document examination subsystems to prescreen exporter and importer documents; and (2) chemical and physics-based subsystems to detect and characterize illicit substances. The document examination subsystems would use software algorithms, artificial intelligence, and neural net technology to perform an initial prescreening of the information on the shipping manifest for suspicious patterns. This would be accomplished by creating a `profile' from the shipping information and matching it to trends known to be used by traffickers. The chemical and physics-based subsystems would apply nuclear physics, x-ray, gas chromatography and spectrometry technologies to locate and identify contraband in containers and other conveyances without the need for manual searches. The approach taken includes using technology testbeds to assist in evaluating technology prototypes and testing system concepts in a fully instrumented but realistic operational environment. This approach coupled with a substance signature phenomenology program to characterize those detectable elements of benign, as well as target substances lends itself particularly well to the topics of risk assessment and elemental characterization of substances. A technology testbed established in Tacoma, Washington provides a national facility for testing and evaluating existing and emerging prototype systems in an operational environment. The results of initial tests using the advanced x-ray subsystem installed at the testbed are given in this paper. A description of typical cargo contents and those characteristics applicable to nuclear interrogation techniques are provided in the appendix.

Muscle mass and physical recovery in ICU: innovations for targeting of nutrition and exercise.

PubMed

Wischmeyer, Paul E; Puthucheary, Zudin; San Millán, Iñigo; Butz, Daniel; Grocott, Michael P W

2017-08-01

We have significantly improved hospital mortality from sepsis and critical illness in last 10 years; however, over this same period we have tripled the number of 'ICU survivors' going to rehabilitation. Furthermore, as up to half the deaths in the first year following ICU admission occur post-ICU discharge, it is unclear how many of these patients ever returned home or a meaningful quality of life. For those who do survive, recent data reveals many 'ICU survivors' will suffer significant functional impairment or post-ICU syndrome (PICS). Thus, new innovative metabolic and exercise interventions to address PICS are urgently needed. These should focus on optimal nutrition and lean body mass (LBM) assessment, targeted nutrition delivery, anabolic/anticatabolic strategies, and utilization of personalized exercise intervention techniques, such as utilized by elite athletes to optimize preparation and recovery from critical care. New data for novel LBM analysis technique such as computerized tomography scan and ultrasound analysis of LBM are available showing objective measures of LBM now becoming more practical for predicting metabolic reserve and effectiveness of nutrition/exercise interventions. 13C-Breath testing is a novel technique under study to predict infection earlier and predict over-feeding and under-feeding to target nutrition delivery. New technologies utilized routinely by athletes such as muscle glycogen ultrasound also show promise. Finally, the role of personalized cardiopulmonary exercise testing to target preoperative exercise optimization and post-ICU recovery are becoming reality. New innovative techniques are demonstrating promise to target recovery from PICS utilizing a combination of objective LBM and metabolic assessment, targeted nutrition interventions, personalized exercise interventions for prehabilitation and post-ICU recovery. These interventions should provide hope that we will soon begin to create more 'survivors' and fewer victim's post-ICU care.

Are All Interventions Created Equal? A Multi-Threat Approach to Tailoring Stereotype Threat Interventions

PubMed Central

Shapiro, Jenessa R.; Williams, Amy M.; Hambarchyan, Mariam

2013-01-01

To date, stereotype threat interventions have been considered interchangeable. Across 4 experiments, the present research demonstrates that stereotype threat interventions need to be tailored to the specific form of experienced stereotype threat to be effective. The Multi-Threat Framework (Shapiro & Neuberg, 2007) distinguishes between group-as-target stereotype threats—concerns that a stereotype-relevant performance will reflect poorly on the abilities of one’s group—and self-as-target stereotype threats—concerns that a stereotype-relevant performance will reflect poorly on one’s own abilities. The present experiments explored Black college students’ performance on diagnostic intelligence tests (Experiments 1 and 3) and women’s interest (Experiment 2) and performance (Experiment 4) in science, technology, engineering, and math (STEM). Across the 4 experiments, participants were randomly assigned to experience either a group-as-target or self-as-target stereotype threat. Experiments 1 and 2 revealed that role model interventions were successful at protecting only against group-as-target stereotype threats, and Experiments 3 and 4 revealed that self-affirmation interventions were successful at protecting only against self-as-target stereotype threats. The present research provides an experimental test of the Multi-Threat Framework across different negatively stereotyped groups (Black students, female students), different negatively stereotyped domains (general intelligence, STEM), and different outcomes (test performance, career interest). This research suggests that interventions should address the range of possible stereotype threats to effectively protect individuals against these threats. Through an appreciation of the distinct forms of stereotype threats and the ways in which interventions work to reduce them, this research aims to facilitate a more complete understanding of stereotype threat. PMID:23088232

Are all interventions created equal? A multi-threat approach to tailoring stereotype threat interventions.

PubMed

Shapiro, Jenessa R; Williams, Amy M; Hambarchyan, Mariam

2013-02-01

To date, stereotype threat interventions have been considered interchangeable. Across 4 experiments, the present research demonstrates that stereotype threat interventions need to be tailored to the specific form of experienced stereotype threat to be effective. The Multi-Threat Framework (Shapiro & Neuberg, 2007) distinguishes between group-as-target stereotype threats-concerns that a stereotype-relevant performance will reflect poorly on the abilities of one's group-and self-as-target stereotype threats-concerns that a stereotype-relevant performance will reflect poorly on one's own abilities. The present experiments explored Black college students' performance on diagnostic intelligence tests (Experiments 1 and 3) and women's interest (Experiment 2) and performance (Experiment 4) in science, technology, engineering, and math (STEM). Across the 4 experiments, participants were randomly assigned to experience either a group-as-target or self-as-target stereotype threat. Experiments 1 and 2 revealed that role model interventions were successful at protecting only against group-as-target stereotype threats, and Experiments 3 and 4 revealed that self-affirmation interventions were successful at protecting only against self-as-target stereotype threats. The present research provides an experimental test of the Multi-Threat Framework across different negatively stereotyped groups (Black students, female students), different negatively stereotyped domains (general intelligence, STEM), and different outcomes (test performance, career interest). This research suggests that interventions should address the range of possible stereotype threats to effectively protect individuals against these threats. Through an appreciation of the distinct forms of stereotype threats and the ways in which interventions work to reduce them, this research aims to facilitate a more complete understanding of stereotype threat. (c) 2013 APA, all rights reserved.

Elaboration and Evaluation of Contents about Hearing Health Inserted in Cybertutor

PubMed Central

Corrêa, Camila de Castro; Silva, Ricelly Avila da; Blasca, Wanderléia Quinhoneiro

2014-01-01

Introduction Cybertutor (electronic tutor) is a type of information and communication technology to disseminate knowledge about hearing, aiming at the prevention of hearing alterations and, when needed, early treatment, in addition to social inclusion of the hearing impaired. However, it is important to evaluate the level of language used in the content and the subjective perception of the target public regarding improvements of the tool. Objective To improve content about hearing health inserted in a cybertutor and to evaluate the level of legibility and the quality of the content and material made available. Method For the construction of the content, text and audiovisual resources were used, based on scientific publications, and were evaluated objectively with Flesch Reading Ease test and subjectively with a questionnaire created by the authors and answered by 10 ninth-year pupils. Results Two modules on hearing health were created, “Hearing Health” and “Intervention and Rehabilitation,” which received Flesch scores of 50.8 and 51.4%, respectively, making it necessary to have a sixth- to ninth-year education to understand the material. The students' evaluation in reference to language and material showed that 55.5% considered the contents excellent; 38.2% classified the contents as satisfactory; 6.3% considered them reasonable; and 0% classified them as unsatisfactory. Conclusion The contents inserted in the cybertutor about hearing health presented a language level considered easy for the age group of the target population, in addition to receiving good subjective evaluation from the pupils, facilitating access to the information. PMID:25992075

Perceptibility and the "Choice Experience": User Sensory Perceptions and Experiences Inform Vaginal Prevention Product Design.

PubMed

Guthrie, Kate Morrow; Dunsiger, Shira; Vargas, Sara E; Fava, Joseph L; Shaw, Julia G; Rosen, Rochelle K; Kiser, Patrick F; Kojic, E Milu; Friend, David R; Katz, David F

The development of pericoital (on demand) vaginal HIV prevention technologies remains a global health priority. Clinical trials to date have been challenged by nonadherence, leading to an inability to demonstrate product efficacy. The work here provides new methodology and results to begin to address this limitation. We created validated scales that allow users to characterize sensory perceptions and experiences when using vaginal gel formulations. In this study, we sought to understand the user sensory perceptions and experiences (USPEs) that characterize the preferred product experience for each participant. Two hundred four women evaluated four semisolid vaginal formulations using the USPE scales at four randomly ordered formulation evaluation visits. Women were asked to select their preferred formulation experience for HIV prevention among the four formulations evaluated. The scale scores on the Sex-associated USPE scales (e.g., Initial Penetration and Leakage) for each participant's selected formulation were used in a latent class model analysis. Four classes of preferred formulation experiences were identified. Sociodemographic and sexual history variables did not predict class membership; however, four specific scales were significantly related to class: Initial Penetration, Perceived Wetness, Messiness, and Leakage. The range of preferred user experiences represented by the scale scores creates a potential target range for product development, such that products that elicit scale scores that fall within the preferred range may be more acceptable, or tolerable, to the population under study. It is recommended that similar analyses should be conducted with other semisolid vaginal formulations, and in other cultures, to determine product property and development targets.

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - GROUNDWATER SAMPLING TECHNOLOGIES - QED ENVIRONMENTAL SYSTEMS INC. WELL WIZARD DEDICATED SAMPLING SYSTEM

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the ...

Sandia National Labs: Manufacturing Science and Technology

Science.gov Websites

Additional Resources R&D Projects Current Partnerships Creating Partnerships Welcome to the Manufacturing Science and Technology home page Manufacturing Science and Technology Showcase The Manufacturing Science & Technology Center develops and applies advanced manufacturing processes for realization of

Innovative eLearning: Technology Shaping Contemporary Problem Based Learning: A Cross-Case Analysis

ERIC Educational Resources Information Center

Blackburn, Greg

2015-01-01

Preparing students to be critical thinkers and effective communicators is essential in today's multinational and technologically sophisticated environment. New electronic technologies provide opportunities for creating learning environments that extend the possibilities of "old" but still essential technologies: books, blackboards, and…

Environmental Technology Verification: Baghouse Filtration Products--Sinoma Science & Technology Co. Ltd FT-806 Filtration Media

EPA Science Inventory

EPA created the Environmental Technology Verification (ETV) Program to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. It seeks to achieve this goal by providing high-quality, peer r...

NewsWire, 2000-2001.

ERIC Educational Resources Information Center

Richey, Nancy, Ed.; Byrom, Elizabeth, Ed.; Bingham, Margaret, Ed.; Guerrero, Jeanne, Ed.; Thrift, Beth, Ed.; Holton, Brook, Ed.

2001-01-01

This document contains five issues of "NewsWire," a newsletter created for the SouthEast and Islands Regional Technology in Education Consortium (SEIR-TEC). Topics addressed in these issues include: leadership and educational technology; technology program development; resources for teaching and learning with technology; U.S. Department of…

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, GEOPROBE INC., PNEUMATIC BLADDER PUMP GW 1400 SERIES

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) design efficient processes for conducting has created the Environmental Technology perfofl1lance tests of innovative technologies. Verification Program (E TV) to facilitate the deployment of innovative or improved environmental techn...

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, GROUNDWATER SAMPLING TECHNOLOGIES, GEOPROBE INC, MECHANICAL BLADDER PUMP MODEL MP470

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) design efficient processes for conducting has created the Environmental Technology perfofl1lance tests of innovative technologies. Verification Program (E TV) to facilitate the deployment of innovative or improved environmental techn...

78 FR 24758 - Government-Owned Inventions; Availability for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-26

...-sequencing identification of the genomic targets of the cytidine deaminase AID and its cofactor RPA in B... . Antimalarial Inhibitors That Target the Plasmodial Surface Anion Channel (PSAC) Protein and Development of the PSAC Protein as Vaccine Targets Description of Technology: There are two related technologies, the...

Using Game Development to Engage Students in Science and Technology

NASA Technical Reports Server (NTRS)

Wiacek, John

2011-01-01

Game design workshops, camps and activities engage K-12 students In STEM disciplines that use game engine and development tools. Game development will have students create games and simulations that Will inspire them to love technology while learning math, physics, and,logic. By using tools such as Gamemaker, Alice, Unity, Gamesalad and others, students will get a sense of confidence and accomplishment creating games and simulations.

3D printing of MRI compatible components: why every MRI research group should have a low-budget 3D printer.

PubMed

Herrmann, Karl-Heinz; Gärtner, Clemens; Güllmar, Daniel; Krämer, Martin; Reichenbach, Jürgen R

2014-10-01

To evaluate low budget 3D printing technology to create MRI compatible components. A 3D printer is used to create customized MRI compatible components, a loop-coil platform and a multipart mouse fixation. The mouse fixation is custom fit for a dedicated coil and facilitates head fixation with bite bar, anesthetic gas supply and biomonitoring sensors. The mouse fixation was tested in a clinical 3T scanner. All parts were successfully printed and proved MR compatible. Both design and printing were accomplished within a few days and the final print results were functional with well defined details and accurate dimensions (Δ<0.4mm). MR images of the mouse head clearly showed reduced motion artifacts, ghosting and signal loss when using the fixation. We have demonstrated that a low budget 3D printer can be used to quickly progress from a concept to a functional device at very low production cost. While 3D printing technology does impose some restrictions on model geometry, additive printing technology can create objects with complex internal structures that can otherwise not be created by using lathe technology. Thus, we consider a 3D printer a valuable asset for MRI research groups. Copyright © 2014 IPEM. Published by Elsevier Ltd. All rights reserved.

[Overview of patents on targeted genome editing technologies and their implications for innovation and entrepreneurship education in universities].

PubMed

Fan, Xiang-yu; Lin, Yan-ping; Liao, Guo-jian; Xie, Jian-ping

2015-12-01

Zinc finger nuclease, transcription activator-like effector nuclease, and clustered regularly interspaced short palindromic repeats/Cas9 nuclease are important targeted genome editing technologies. They have great significance in scientific research and applications on aspects of functional genomics research, species improvement, disease prevention and gene therapy. There are past or ongoing disputes over ownership of the intellectual property behind every technology. In this review, we summarize the patents on these three targeted genome editing technologies in order to provide some reference for developing genome editing technologies with self-owned intellectual property rights and some implications for current innovation and entrepreneurship education in universities.

Applications of CRISPR/Cas9 technology for targeted mutagenesis, gene replacement and stacking of genes in higher plants.

PubMed

Luo, Ming; Gilbert, Brian; Ayliffe, Michael

2016-07-01

Mutagenesis continues to play an essential role for understanding plant gene function and, in some instances, provides an opportunity for plant improvement. The development of gene editing technologies such as TALENs and zinc fingers has revolutionised the targeted mutation specificity that can now be achieved. The CRISPR/Cas9 system is the most recent addition to gene editing technologies and arguably the simplest requiring only two components; a small guide RNA molecule (sgRNA) and Cas9 endonuclease protein which complex to recognise and cleave a specific 20 bp target site present in a genome. Target specificity is determined by complementary base pairing between the sgRNA and target site sequence enabling highly specific, targeted mutation to be readily engineered. Upon target site cleavage, error-prone endogenous repair mechanisms produce small insertion/deletions at the target site usually resulting in loss of gene function. CRISPR/Cas9 gene editing has been rapidly adopted in plants and successfully undertaken in numerous species including major crop species. Its applications are not restricted to mutagenesis and target site cleavage can be exploited to promote sequence insertion or replacement by recombination. The multiple applications of this technology in plants are described.

Technology and Terrorism in the Movie Brazil

ERIC Educational Resources Information Center

Stivers, Richard

2006-01-01

The movie "Brazil" calls attention to the relationship between technology and terrorism. Terrorism appears to be a threat to the order that technology creates. But terrorism forces technology to adapt and change so that technology perfects itself as a system. In the movie, terrorism is equated with any form of bureaucratic deviance so that…

Creating a Resource Center for Homeschoolers: The Impact of Technology.

ERIC Educational Resources Information Center

Javid, Mahnaz A.

1998-01-01

Summarizes the findings of a two-month case study of Edmonds Cyberschool (Washington), a resource center for homeschoolers. The study focused on the impact of technology on students' learning as indicated in three areas: attitude toward technology, the use of technology, and value of technology versus other available resources. (Author/LRW)

Instructional Technologists at Public Schools: A Study of the Role and Effectiveness of Technology Resource Teachers.

ERIC Educational Resources Information Center

Moallem, Mahnaz; Micallef, Suzanne

Human resource positions that are becoming known as Technology Coordinator (for district-level personnel) and Technology Resource Teacher (for school-level personnel) have been created to help integrate technology into classroom instruction. This study assessed the progress and effectiveness of Technology Resource Teachers, or TRTs, as technical…

Middle School Mathematics Teachers' Experiences with School-Based and District-Based Support and Its Relationship to Integrating Technology

ERIC Educational Resources Information Center

Hampshire, Onequa N.

2014-01-01

Technological advances play a major role in educating students' in mathematics. Research indicates that technology could create learning environments that support innovativeness and assist teachers in developing a positive attitude toward integrating technology. Unfortunately, teachers are not utilizing technology on a regular basis in mathematics…

Marine Tech in the Bayou City: An Experiential Education Experience

NASA Astrophysics Data System (ADS)

Barnard, A.; Mackay, E.; Zarate, A.; Coutts, A.; Craig, A.; Roman, R.; Max, M. D.; Detiveaux, G.; Dement, G.; Trufan, E.; Sager, W.; Wellner, J.; Stewart, R. R.; Mayer, L. A.; Coffin, R. B.; Vielstädte, L.; Skarke, A. D.; VanSumeren, H.; Cardenas, I.; Mir, R.

2017-12-01

Training and expertise in underwater exploration with advanced marine technology is a must for today's STEM graduates. Much of this training can be initiated in relatively inexpensive ways using local expertise and technologies. Instead of going to sea, we have previously demonstrated marine survey techniques by exploring the shallow waters of Houston's bayous. This setting has served to encourage participant's intrinsic motivation. In this study attendees were given the opportunity to fly/pilot a remotely operated vehicle (ROV), an autonomous surface vehicle (ASV), and participate in relevant lectures and data analysis. To achieve a quantitative evaluation of the training, participants provided responses to a list of focused questions before and after the survey exercises. Initially, a multibeam survey (200 m x 50 m) was conducted by Survey Equipment Services, Inc. using an Teledyne Oceanscience Z-Boat ASV with an Integrated 200 - 460 kHz Odom MB2 Multibeam System. Using the multibeam survey data research students identified acoustic targets on the bayou floor for further investigation. Target identification was achieved using a Predator II (Seatronics, Inc., an Acteon company) ROV mounted with a Teledyne BlueView Technologies M900-130 900 kHz, and 1.4 - 3 MHz Sound Metrics ARIS Explorer 3000 imaging sonars. Multibeam data delineated a 90 m long, 45 m wide, and 8 m deep hollow, interpreted as a confluence scour created at the junction of the Buffalo and White Oak Bayous. A raised bank downstream of the hollow within the main channel is attributed to rapid sedimentation in a region of post confluence flow deceleration. Targets in the imaging sonar were identified as boulder-sized transported riprap, fluvial sediment, and sand waves. Review of participant's survey results using a Wilcoxon signed rank test indicated statistically significant results across all 30 survey questions. Positive improvements were reported across the board in questions related to three focus areas; awareness, experience, and interest in/of marine geoscience activities. These encouraging results confirm the feasibility of local high-resolution studies as training activities, as well as feeding local and national graduate field programs, and producing data that could be useful to city and state engineers for bayou design.

Web-Based Cancer Communication and Decision Making Systems: Connecting Patients, Caregivers, and Clinicians for Improved Health Outcomes

PubMed Central

DuBenske, Lori L.; Gustafson, David H.; Shaw, Bret R.; Cleary, James F.

2011-01-01

Over the cancer disease trajectory, from diagnosis and treatment to remission or end of life, patients and their families face difficult decisions. The provision of information and support when most relevant can optimize cancer decision making and coping. An interactive health communication system (IHCS) offers the potential to bridge the communication gaps that occur among patients, family, and clinicians and to empower each to actively engage in cancer care and shared decision making. This is a report of the authors' experience (with a discussion of relevant literature) in developing and testing a Web-based IHCS—the Comprehensive Health Enhancement Support System (CHESS)—for patients with advanced lung cancer and their family caregivers. CHESS provides information, communication, and coaching resources as well as a symptom tracking system that reports health status to the clinical team. Development of an IHCS includes a needs assessment of the target audience and applied theory informed by continued stakeholder involvement in early testing. Critical issues of IHCS implementation include 1) need for interventions that accommodate a variety of format preferences and technology comfort ranges; 2) IHCS user training, 3) clinician investment in IHCS promotion, and 4) IHCS integration with existing medical systems. In creating such comprehensive systems, development strategies need to be grounded in population needs with appropriate use of technology that serves the target users, including the patient/family, clinical team, and health care organization. Implementation strategies should address timing, personnel, and environmental factors to facilitate continued use and benefit from IHCS. An interactive health communication system (IHCS) offers one platform for providing the information, communication, and coaching resources that cancer patients and their families need to understand the disease, find support, and develop decision-making and coping skills. One such IHCS—the Comprehensive Health Enhancement Support System (CHESS)—has evolved over the past 20 years. Based on our recent experience creating and testing a new version of CHESS—“Coping with Lung Cancer: A Network of Support”—this article outlines the issues faced in developing and implementing such a system within the cancer context. PMID:21041539

S5: Information Technology for Science Missions

NASA Technical Reports Server (NTRS)

Coughlan, Joe

2017-01-01

NASA Missions and Programs create a wealth of science data and information that are essential to understanding our earth, our solar system and the universe. Advancements in information technology will allow many people within and beyond the Agency to more effectively analyze and apply these data and information to create knowledge. The desired end result is to see that NASA data and science information are used to generate the maximum possible impact to the nation: to advance scientific knowledge and technological capabilities, to inspire and motivate the nation's students and teachers, and to engage and educate the public.

Diabetes Information Technology: Designing Informatics Systems to Catalyze Change in Clinical Care

PubMed Central

Lester, William T.; Zai, Adrian H.; Chueh, Henry C.; Grant, Richard W.

2008-01-01

Current computerized reminder and decision support systems intended to improve diabetes care have had a limited effect on clinical outcomes. Increasing pressures on health care networks to meet standards of diabetes care have created an environment where information technology systems for diabetes management are often created under duress, appended to existing clinical systems, and poorly integrated into the existing workflow. After defining the components of diabetes disease management, the authors present an eight-step conceptual framework to guide the development of more effective diabetes information technology systems for translating clinical information into clinical action. PMID:19885355

Competence formation of engineering directions students in the field of energy saving as a way to create new generation technologies

NASA Astrophysics Data System (ADS)

Gilmanshin, I. R.; Gilmanshina, S. I.

2017-09-01

The urgency of the formation of competence in the field of energy saving in the process of studying engineering and technical disciplines at the university is substantiated. The author’s definition of the competence in the field of energy saving is given, allowing to consider the necessity of its formation among students - future engineers as a way to create technologies of a new generation. The essence of this competence is revealed. The system of work, pedagogical conditions and technologies of its formation in the conditions of the federal university is substantiated.

Defense Technology Objectives of the Joint Warfighting Science and Technology and Defense Technology Area Plan.

DTIC Science & Technology

1996-05-01

Nudist colonies Carribean resots List of Targets List ofWeapons List of lists List of Places Vacation spots Nudist colonies Carribean resots List of...Targets List ofWeapons List of lists L of Places Vacation spots Nudist colonies Carribean resots List of Targets List fW apons List of lists L of...Places Vacation pots Nudist colonies Carribean resots IV -A -63 DISTRIBUTED AOC PROTOTYPE PROVISIONAL EXIT CRITERIA BASELINE GOALMINIMUMOPERATIONAL

Manufacturing Innovation and Technological Superiority

DTIC Science & Technology

2016-09-01

Defense AT&L: September-October 2016 2 From the Under Secretary of Defense for Acquisit ion, Technology, and Logist ics Manufacturing Innovation ...program to establish Manufacturing Innovation Institutes (MIIs) that would create incubators for advanced manufacturing technology in key

indCAPS: A tool for designing screening primers for CRISPR/Cas9 mutagenesis events.

PubMed

Hodgens, Charles; Nimchuk, Zachary L; Kieber, Joseph J

2017-01-01

Genetic manipulation of organisms using CRISPR/Cas9 technology generally produces small insertions/deletions (indels) that can be difficult to detect. Here, we describe a technique to easily and rapidly identify such indels. Sequence-identified mutations that alter a restriction enzyme recognition site can be readily distinguished from wild-type alleles using a cleaved amplified polymorphic sequence (CAPS) technique. If a restriction site is created or altered by the mutation such that only one allele contains the restriction site, a polymerase chain reaction (PCR) followed by a restriction digest can be used to distinguish the two alleles. However, in the case of most CRISPR-induced alleles, no such restriction sites are present in the target sequences. In this case, a derived CAPS (dCAPS) approach can be used in which mismatches are purposefully introduced in the oligonucleotide primers to create a restriction site in one, but not both, of the amplified templates. Web-based tools exist to aid dCAPS primer design, but when supplied sequences that include indels, the current tools often fail to suggest appropriate primers. Here, we report the development of a Python-based, species-agnostic web tool, called indCAPS, suitable for the design of PCR primers used in dCAPS assays that is compatible with indels. This tool should have wide utility for screening editing events following CRISPR/Cas9 mutagenesis as well as for identifying specific editing events in a pool of CRISPR-mediated mutagenesis events. This tool was field-tested in a CRISPR mutagenesis experiment targeting a cytokinin receptor (AHK3) in Arabidopsis thaliana. The tool suggested primers that successfully distinguished between wild-type and edited alleles of a target locus and facilitated the isolation of two novel ahk3 null alleles. Users can access indCAPS and design PCR primers to employ dCAPS to identify CRISPR/Cas9 alleles at http://indcaps.kieber.cloudapps.unc.edu/.

A strategic gaming model for health information exchange markets.

PubMed

Martinez, Diego A; Feijoo, Felipe; Zayas-Castro, Jose L; Levin, Scott; Das, Tapas K

2018-03-01

Current market conditions create incentives for some providers to exercise control over patient data in ways that unreasonably limit its availability and use. Here we develop a game theoretic model for estimating the willingness of healthcare organizations to join a health information exchange (HIE) network and demonstrate its use in HIE policy design. We formulated the model as a bi-level integer program. A quasi-Newton method is proposed to obtain a strategy Nash equilibrium. We applied our modeling and solution technique to 1,093,177 encounters for exchanging information over a 7.5-year period in 9 hospitals located within a three-county region in Florida. Under a set of assumptions, we found that a proposed federal penalty of up to $2,000,000 has a higher impact on increasing HIE adoption than current federal monetary incentives. Medium-sized hospitals were more reticent to adopt HIE than large-sized hospitals. In the presence of collusion among multiple hospitals to not adopt HIE, neither federal incentives nor proposed penalties increase hospitals' willingness to adopt. Hospitals' apathy toward HIE adoption may threaten the value of inter-connectivity even with federal incentives in place. Competition among hospitals, coupled with volume-based payment systems, creates no incentives for smaller hospitals to exchange data with competitors. Medium-sized hospitals need targeted actions (e.g., outside technological assistance, group purchasing arrangements) to mitigate market incentives to not adopt HIE. Strategic game theoretic models help to clarify HIE adoption decisions under market conditions at play in an extremely complex technology environment.

Training and Assessing Interprofessional Virtual Teams Using a Web-Based Case System.

PubMed

Dow, Alan W; Boling, Peter A; Lockeman, Kelly S; Mazmanian, Paul E; Feldman, Moshe; DiazGranados, Deborah; Browning, Joel; Coe, Antoinette; Selby-Penczak, Rachel; Hobgood, Sarah; Abbey, Linda; Parsons, Pamela; Delafuente, Jeffrey; Taylor, Suzanne F

2016-01-01

Today, clinical care is often provided by interprofessional virtual teams-groups of practitioners who work asynchronously and use technology to communicate. Members of such teams must be competent in interprofessional practice and the use of information technology, two targets for health professions education reform. The authors created a Web-based case system to teach and assess these competencies in health professions students. They created a four-module, six-week geriatric learning experience using a Web-based case system. Health professions students were divided into interprofessional virtual teams. Team members received profession-specific information, entered a summary of this information into the case system's electronic health record, answered knowledge questions about the case individually, then collaborated asynchronously to answer the same questions as a team. Individual and team knowledge scores and case activity measures--number of logins, message board posts/replies, views of message board posts--were tracked. During academic year 2012-2013, 80 teams composed of 522 students from medicine, nursing, pharmacy, and social work participated. Knowledge scores varied by profession and within professions. Team scores were higher than individual scores (P < .001). Students and teams with higher knowledge scores had higher case activity measures. Team score was most highly correlated with number of message board posts/replies and was not correlated with number of views of message board posts. This Web-based case system provided a novel approach to teach and assess the competencies needed for virtual teams. This approach may be a valuable new tool for measuring competency in interprofessional practice.

NASA Virtual Institutes: International Bridges for Space Exploration

NASA Technical Reports Server (NTRS)

Schmidt, Gregory K.

2016-01-01

NASA created the first virtual institute, the NASA Astrobiology Institute (NAI), in 2009 with an aim toward bringing together geographically disparate and multidisciplinary teams toward the goal of answering broad questions in the then-new discipline of astrobiology. With the success of the virtual institute model, NASA then created the NASA Lunar Science Institute (NLSI) in 2008 to address questions of science and human exploration of the Moon, and then the NASA Aeronautics Research Institute (NARI) in 2012 which addresses key questions in the development of aeronautics technologies. With the broadening of NASA's human exploration targets to include Near Earth Asteroids and the moons of Mars as well as the Moon, the NLSI morphed into the Solar System Exploration Research Virtual Institute (SSERVI) in 2012. SSERVI funds domestic research teams to address broad questions at the intersection of science and human exploration, with the underlying principle that science enables human exploration, and human exploration enables science. Nine domestic teams were funded in 2014 for a five-year period to address a variety of different topics, and nine international partners (with more to come) also work with the U.S. teams on a variety of topics of mutual interest. The result is a robust and productive research infrastructure that is not only scientifically productive but can respond to strategic topics of domestic and international interest, and which develops a new generation of researchers. This is all accomplished with the aid of virtual collaboration technologies which enable scientific research at a distance. The virtual institute model is widely applicable to a range of space science and exploration problems.

Radar signature generation for feature-aided tracking research

NASA Astrophysics Data System (ADS)

Piatt, Teri L.; Sherwood, John U.; Musick, Stanton H.

2005-05-01

Accurately associating sensor kinematic reports to known tracks, new tracks, or clutter is one of the greatest obstacles to effective track estimation. Feature-aiding is one technology that is emerging to address this problem, and it is expected that adding target features will aid report association by enhancing track accuracy and lengthening track life. The Sensor's Directorate of the Air Force Research Laboratory is sponsoring a challenge problem called Feature-Aided Tracking of Stop-move Objects (FATSO). The long-range goal of this research is to provide a full suite of public data and software to encourage researchers from government, industry, and academia to participate in radar-based feature-aided tracking research. The FATSO program is currently releasing a vehicle database coupled to a radar signature generator. The completed FATSO system will incorporate this database/generator into a Monte Carlo simulation environment for evaluating multiplatform/multitarget tracking scenarios. The currently released data and software contains the following: eight target models, including a tank, ammo hauler, and self-propelled artillery vehicles; and a radar signature generator capable of producing SAR and HRR signatures of all eight modeled targets in almost any configuration or articulation. In addition, the signature generator creates Z-buffer data, label map data, and radar cross-section prediction and allows the user to add noise to an image while varying sensor-target geometry (roll, pitch, yaw, squint). Future capabilities of this signature generator, such as scene models and EO signatures as well as details of the complete FATSO testbed, are outlined.

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT; GROUNDWATER SAMPLING TECHNOLOGIES; W.L. GORE AND ASSOCIATES, INC., GORE-SORBER WATER QUALITY MONITORING

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has created the Environmental Technology Verification Program (ETV) to facilitate the deployment of innovative or improved environmental technologies through performance verification and dissemination of information. The goal of the...

45 CFR 170.210 - Standards for health information technology to protect electronic health information created...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false Standards for health information technology to... Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION... FOR HEALTH INFORMATION TECHNOLOGY Standards and Implementation Specifications for Health Information...

45 CFR 170.210 - Standards for health information technology to protect electronic health information created...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 1 2012-10-01 2012-10-01 false Standards for health information technology to... Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION... FOR HEALTH INFORMATION TECHNOLOGY Standards and Implementation Specifications for Health Information...

45 CFR 170.210 - Standards for health information technology to protect electronic health information created...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Standards for health information technology to... Welfare Department of Health and Human Services HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION... FOR HEALTH INFORMATION TECHNOLOGY Standards and Implementation Specifications for Health Information...

45 CFR 170.210 - Standards for health information technology to protect electronic health information created...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 1 2011-10-01 2011-10-01 false Standards for health information technology to... Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION... FOR HEALTH INFORMATION TECHNOLOGY Standards and Implementation Specifications for Health Information...

45 CFR 170.210 - Standards for health information technology to protect electronic health information created...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Standards for health information technology to... Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION... FOR HEALTH INFORMATION TECHNOLOGY Standards and Implementation Specifications for Health Information...

Teaching 'How To' Technologies in Context.

ERIC Educational Resources Information Center

Leigh, Patricia Randolph

The introductory instructional technology course at Iowa State University is a survey course covering various technologies. In this case, the instructor chose to create a situated learning environment using low-technology everyday surroundings to teach the fundamentals of photographic and video production, linking the photography, audio, and video…

Carbon prices and incentives for technological development.

PubMed

Lundgren, Tommy; Marklund, Per-Olov; Samakovlis, Eva; Zhou, Wenchao

2015-03-01

There is concern that the carbon prices generated through climate policies are too low to create the incentives necessary to stimulate technological development. This paper empirically analyzes how the Swedish carbon dioxide (CO2) tax and the European Union emission trading system (EU ETS) have affected productivity development in the Swedish pulp and paper industry 1998-2008. A Luenberger total factor productivity (TFP) indicator is computed using data envelopment analysis. The results show that climate policy had a modest impact on technological development in the pulp and paper industry, and if significant it was negative. The price of fossil fuels, on the contrary, seems to have created important incentives for technological development. Hence, the results suggest that the carbon prices faced by the industry through EU ETS and the CO2 tax have been too low. Even though the data for this study is specific for Sweden, the models and results are applicable internationally. When designing policy to mitigate CO2 emissions, it is vital that the policy creates a carbon price that is high enough - otherwise the pressure on technological development will not be sufficiently strong. Copyright © 2014 Elsevier Ltd. All rights reserved.

Three-dimensional Biomimetic Technology: Novel Biorubber Creates Defined Micro- and Macro-scale Architectures in Collagen Hydrogels

PubMed Central

Rodriguez-Rivera, Veronica; Weidner, John W.; Yost, Michael J.

2016-01-01

Tissue scaffolds play a crucial role in the tissue regeneration process. The ideal scaffold must fulfill several requirements such as having proper composition, targeted modulus, and well-defined architectural features. Biomaterials that recapitulate the intrinsic architecture of in vivo tissue are vital for studying diseases as well as to facilitate the regeneration of lost and malformed soft tissue. A novel biofabrication technique was developed which combines state of the art imaging, three-dimensional (3D) printing, and selective enzymatic activity to create a new generation of biomaterials for research and clinical application. The developed material, Bovine Serum Albumin rubber, is reaction injected into a mold that upholds specific geometrical features. This sacrificial material allows the adequate transfer of architectural features to a natural scaffold material. The prototype consists of a 3D collagen scaffold with 4 and 3 mm channels that represent a branched architecture. This paper emphasizes the use of this biofabrication technique for the generation of natural constructs. This protocol utilizes a computer-aided software (CAD) to manufacture a solid mold which will be reaction injected with BSA rubber followed by the enzymatic digestion of the rubber, leaving its architectural features within the scaffold material. PMID:26967145

Three-dimensional Biomimetic Technology: Novel Biorubber Creates Defined Micro- and Macro-scale Architectures in Collagen Hydrogels.

PubMed

Rodriguez-Rivera, Veronica; Weidner, John W; Yost, Michael J

2016-02-12

Tissue scaffolds play a crucial role in the tissue regeneration process. The ideal scaffold must fulfill several requirements such as having proper composition, targeted modulus, and well-defined architectural features. Biomaterials that recapitulate the intrinsic architecture of in vivo tissue are vital for studying diseases as well as to facilitate the regeneration of lost and malformed soft tissue. A novel biofabrication technique was developed which combines state of the art imaging, three-dimensional (3D) printing, and selective enzymatic activity to create a new generation of biomaterials for research and clinical application. The developed material, Bovine Serum Albumin rubber, is reaction injected into a mold that upholds specific geometrical features. This sacrificial material allows the adequate transfer of architectural features to a natural scaffold material. The prototype consists of a 3D collagen scaffold with 4 and 3 mm channels that represent a branched architecture. This paper emphasizes the use of this biofabrication technique for the generation of natural constructs. This protocol utilizes a computer-aided software (CAD) to manufacture a solid mold which will be reaction injected with BSA rubber followed by the enzymatic digestion of the rubber, leaving its architectural features within the scaffold material.

Passive metamaterial-based acoustic holograms in ultrasound energy transfer systems

NASA Astrophysics Data System (ADS)

Bakhtiari-Nejad, Marjan; Elnahhas, Ahmed; Hajj, Muhammad R.; Shahab, Shima

2018-03-01

Contactless energy transfer (CET) is a technology that is particularly relevant in applications where wired electrical contact is dangerous or impractical. Furthermore, it would enhance the development, use, and reliability of low-power sensors in applications where changing batteries is not practical or may not be a viable option. One CET method that has recently attracted interest is the ultrasonic acoustic energy transfer, which is based on the reception of acoustic waves at ultrasonic frequencies by a piezoelectric receiver. Patterning and focusing the transmitted acoustic energy in space is one of the challenges for enhancing the power transmission and locally charging sensors or devices. We use a mathematically designed passive metamaterial-based acoustic hologram to selectively power an array of piezoelectric receivers using an unfocused transmitter. The acoustic hologram is employed to create a multifocal pressure pattern in the target plane where the receivers are located inside focal regions. We conduct multiphysics simulations in which a single transmitter is used to power multiple receivers with an arbitrary two-dimensional spatial pattern via wave controlling and manipulation, using the hologram. We show that the multi-focal pressure pattern created by the passive acoustic hologram will enhance the power transmission for most receivers.

Examining a DNA Replication Requirement for Bacteriophage λ Red- and Rac Prophage RecET-Promoted Recombination in Escherichia coli.

PubMed

Thomason, Lynn C; Costantino, Nina; Court, Donald L

2016-09-13

Recombineering, in vivo genetic engineering with bacteriophage homologous recombination systems, is a powerful technique for making genetic modifications in bacteria. Two systems widely used in Escherichia coli are the Red system from phage λ and RecET from the defective Rac prophage. We investigated the in vivo dependence of recombineering on DNA replication of the recombining substrate using plasmid targets. For λ Red recombination, when DNA replication of a circular target plasmid is prevented, recombination with single-stranded DNA oligonucleotides is greatly reduced compared to that under replicating conditions. For RecET recombination, when DNA replication of the targeted plasmid is prevented, the recombination frequency is also reduced, to a level identical to that seen for the Red system in the absence of replication. The very low level of oligonucleotide recombination observed in the absence of any phage recombination functions is the same in the presence or absence of DNA replication. In contrast, both the Red and RecET systems recombine a nonreplicating linear dimer plasmid with high efficiency to yield a circular monomer. Therefore, the DNA replication requirement is substrate dependent. Our data are consistent with recombination by both the Red and RecET systems occurring predominately by single-strand annealing rather than by strand invasion. Bacteriophage homologous recombination systems are widely used for in vivo genetic engineering in bacteria. Single- or double-stranded linear DNA substrates containing short flanking homologies to chromosome targets are used to generate precise and accurate genetic modifications when introduced into bacteria expressing phage recombinases. Understanding the molecular mechanism of these recombination systems will facilitate improvements in the technology. Here, two phage-specific systems are shown to require exposure of complementary single-strand homologous targets for efficient recombination; these single-strand regions may be created during DNA replication or by single-strand exonuclease digestion of linear duplex DNA. Previously, in vitro studies reported that these recombinases promote the single-strand annealing of two complementary DNAs and also strand invasion of a single DNA strand into duplex DNA to create a three-stranded region. Here, in vivo experiments show that recombinase-mediated annealing of complementary single-stranded DNA is the predominant recombination pathway in E. coli. Copyright © 2016 Thomason et al.

Thin liquid sheet target capabilities for ultra-intense laser acceleration of ions at a kHz repetition rate

NASA Astrophysics Data System (ADS)

Klim, Adam; Morrison, J. T.; Orban, C.; Feister, S.; Ngirmang, G. K.; Smith, J.; Frische, K.; Peterson, A. C.; Chowdhury, E. A.; Freeman, R. R.; Roquemore, W. M.

2016-10-01

The success of laser-accelerated ion experiments depends crucially on a number of factors including how thin the targets can be created. We present experimental results demonstrating extremely thin (under 200 nm) water sheet targets that can be used for ultra-intense laser-accelerated ion experiments conducted at the Air Force Research Laboratory at Wright-Patterson Air Force Base. Importantly, these experiments operate at a kHz repetition rate and the recovery time of the liquid targets is fast enough to allow the laser to interact with a refreshed, thin target on every shot. We present results from liquid water targets which are useful for proton acceleration experiments via the mechanism of Target Normal Sheath Acceleration (TNSA). In future work, we will create thin sheets from deuterated water in order to perform laser-accelerated deuteron experiments. This research was sponsored by the Quantum and Non-Equilibrium Processes Division of the AFOSR, under the management of Dr. Enrique Parra, and support from the DOD HPCMP Internship Program.

An Internet Application To Relieve Constraints in the Flow of Technical Information--The Virtual Technology Market (VTM).

ERIC Educational Resources Information Center

Beverly, James E.; Xue, Lan; Lee, Chung-Shing

1996-01-01

Reports on the use of the Internet and World Wide Web as a virtual technology market (VTM) for information and technology transfer. The project focuses on creating awareness of technology demand (problems) and linking it to technology supply (solutions) in the field of particle technology and multiphase processes in the chemical industry. Benefits…

The application and research of the multi-receiving telescopes technology in laser ranging to space targets

NASA Astrophysics Data System (ADS)

Wu, Zhibo; Zhang, Haifeng; Zhang, Zhongping; Deng, Huarong; Li, Pu; Meng, Wendong; Cheng, Zhien; Shen, Lurun; Tang, Zhenhong

2014-11-01

Laser ranging technology can directly measure the distance between space targets and ground stations with the highest measurement precision and will play an irreplaceable role in orbit check and calibrating microwave measurement system. The precise orbit determination and accurate catalogue of space targets can also be realized by laser ranging with multi-stations. Among space targets, most of ones are inactive targets and space debris, which should be paid the great attentions for the safety of active spacecrafts. Because of laser diffuse reflection from the surface of targets, laser ranging to space debris has the characteristics of wide coverage and weak strength of laser echoes, even though the powerful laser system is applied. In order to increase the receiving ability of laser echoes, the large aperture telescope should be adopted. As well known, some disadvantages for one set of large aperture telescope, technical development difficulty and system running and maintenance complexity, will limit its flexible applications. The multi-receiving telescopes technology in laser ranging to space targets is put forward to realize the equivalent receiving ability produced by one larger aperture telescope by way of using multi-receiving telescopes, with the advantages of flexibility and maintenance. The theoretical analysis of the feasibility and key technologies of multi-receiving telescopes technology in laser ranging to space targets are presented in this paper. The experimental measurement system based on the 60cm SLR system and 1.56m astronomical telescopes with a distance of about 50m is established to provide the platform for researching on the multi-receiving telescopes technology. The laser ranging experiments to satellites equipped with retro-reflectors are successfully performed by using the above experimental system and verify the technical feasibility to increase the ability of echo detection. And the multi-receiving telescopes technology will become a novel effective way to improve the detection ability of laser ranging to space debris.

Synthetic fuels, and a sustainable set of civilizations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leonard, R.S.

Described in this paper is a concept that combines a set of technologies with a set of economic and social concepts that would allow people to create sustainable ecologies for their region or country. As such it describes a possible implementation path. The technologies are : solar electricity, power satellites, wireless power transmission, electrolytic hydrogen, and synthetic liquid fuels manufactured from air, water, and electricity. Economic initiatives and policies include creating sustainable economic development regions through the use of tax incentives and tax penalties. The technologies and economies are brought together by social concepts such as Technopolis and the theorymore » of self-organizing and self-energizing social systems, i.e. creating wealth where there was none through sweat equity. Existing organizational structures such as credit unions, kibbutz`s and agricultural and marketing cooperatives provide methods by which global marco-projects can be implemented on a local level. Some topics of this paper are : creating global markets by solving global problems or how to breakout of the chicken or egg paradox that has stymied the development of energy from space for so long ; and linking energy availability to self-help economic development programs that create sustainable cultures while benefiting both the local and global environment. 1 refs., 6 figs., 6 tabs.« less

Target Fabrication Technology and New Functional Materials for Laser Fusion and Laser-Plasma Experiment

NASA Astrophysics Data System (ADS)

Nagai, Keiji; Norimatsu, Takayoshi; Izawa, Yasukazu

Target fabrication technique is a key issue of laser fusion. We present a comprehensive, up-to-data compilation of laser fusion target fabrication and relating new materials. To achieve highly efficient laser implosion, organic and inorganic highly spherical millimeter-sized capsules and cryogenic hydrogen layers inside should be uniform in diameter and thickness within sub-micrometer ˜ nanometer error. Porous structured targets and molecular cluster targets are required for laser-plasma experiments and applications. Various technologies and new materials concerning above purposes are summarized including fast-ignition targets, equation-of-state measurement targets, high energy ion generation targets, etc.

Technology Tips

ERIC Educational Resources Information Center

Santos-Trigo, Manuel

2004-01-01

A dynamic program for geometry called Cabri Geometry II is used to examine properties of figures like triangles and make connections with other mathematical ideas like ellipse. The technology tip includes directions for creating such a problem with technology and suggestions for exploring it.

TREND 2000

NASA Technical Reports Server (NTRS)

1996-01-01

The Educator Resource Center has created the Technology, Research, Education and Discovery (TREND) 2000 computer lab at NASA's John C. Stennis Space Center to facilitate the integration of technology into schools' curriculums by providing innovative and creative classroom strategies using state-of-the-art technology.

Alternate energy sources for catheter ablation.

PubMed

Wang, P J; Homoud, M K; Link, M S; Estes III, N A

1999-07-01

Because of the limitations of conventional radiofrequency ablation in creating large or linear lesions, alternative energy sources have been used as possible methods of catheter ablation. Modified radiofrequency energy, cryoablation, and microwave, laser, and ultrasound technologies may be able to create longer, deeper, and more controlled lesions and may be particularly suited for the treatment of ventricular tachycardias and for linear atrial ablation. Future studies will establish the efficacy of these new and promising technologies.

The Challenges of Adopting a Culture of Mission Command in the US Army

DTIC Science & Technology

2015-05-23

NUMBER 6. AUTHOR(S) LTC(P) James W. Wright 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND...the development and implementation of high- end information technology creates a paradox for mission command. 15. SUBJECT TERMS Mission command...centralized control and less risk. Likewise, the development and implementation of high- end information technology creates a paradox for mission

Exploring the Eastern United States Continental Shelf with the NOAA Cooperative Institute for Ocean Exploration, Research, and Technology

NASA Astrophysics Data System (ADS)

Glickson, D.; Pomponi, S. A.

2016-02-01

The Cooperative Institute for Ocean Exploration, Research, and Technology (CIOERT) serves NOAA priorities in three theme areas: exploring the eastern U.S. continental shelf, improving the understanding of coral and sponge ecosystems, and developing advanced underwater technologies. CIOERT focuses on the exploration and research of ecosystems and habitats along frontier regions of the eastern U.S. continental shelf that are of economic, scientific, or cultural importance or of natural hazards concern. One particular focus is supporting ocean exploration and research through the use of advanced underwater technologies and techniques in order to improve the understanding of vulnerable deep and shallow coral and sponge ecosystems. CIOERT expands the scope and efficiency of exploration and research by developing, testing, and applying new and/or innovative uses of existing technologies to ocean exploration and research activities. In addition, CIOERT is dedicated to expanding ocean literacy and building NOAA's technical and scientific workforce through hands-on, at-sea experiences. A recent CIOERT cruise characterized Gulf of Mexico mesophotic and deepwater reef ecosystems off the west Florida shelf, targeting northern Pulley Ridge. This project created and ground-truthed new sonar maps made with an autonomous underwater vehicle; conducted video and photographic transects of benthic habitat and fish using a remotely operated vehicle; and examined the connectivity of fauna from shallow to deep reef ecosystems. CIOERT was established in 2009 by FAU-Harbor Branch Oceanographic Institute, with University of North Carolina, Wilmington, SRI International, and the University of Miami. The primary NOAA partner is the Office of Oceanic and Atmospheric Research's Office of Ocean Exploration and Research.

Exploring the Eastern United States Continental Shelf with the NOAA Cooperative Institute for Ocean Exploration, Research, and Technology

NASA Astrophysics Data System (ADS)

Glickson, D.; Pomponi, S.

2015-12-01

The Cooperative Institute for Ocean Exploration, Research, and Technology (CIOERT) serves NOAA priorities in three theme areas: exploring the eastern U.S. continental shelf, improving the understanding of coral and sponge ecosystems, and developing advanced underwater technologies. CIOERT focuses on the exploration and research of ecosystems and habitats along frontier regions of the eastern U.S. continental shelf that are of economic, scientific, or cultural importance or of natural hazards concern. One particular focus is supporting ocean exploration and research through the use of advanced underwater technologies and techniques in order to improve the understanding of vulnerable deep and shallow coral and sponge ecosystems. CIOERT expands the scope and efficiency of exploration and research by developing, testing, and applying new and/or innovative uses of existing technologies to ocean exploration and research activities. In addition, CIOERT is dedicated to expanding ocean literacy and building NOAA's technical and scientific workforce through hands-on, at-sea experiences. A recent CIOERT cruise characterized Gulf of Mexico mesophotic and deepwater reef ecosystems off the west Florida shelf, targeting northern Pulley Ridge. This project created and ground-truthed new sonar maps made with an autonomous underwater vehicle; conducted video and photographic transects of benthic habitat and fish using a remotely operated vehicle; and examined the connectivity of fauna from shallow to deep reef ecosystems. CIOERT was established in 2009 by FAU-Harbor Branch Oceanographic Institute, with University of North Carolina, Wilmington, SRI International, and the University of Miami. The primary NOAA partner is the Office of Oceanic and Atmospheric Research's Office of Ocean Exploration and Research.

Ribosome display: next-generation display technologies for production of antibodies in vitro.

PubMed

He, Mingyue; Khan, Farid

2005-06-01

Antibodies represent an important and growing class of biologic research reagents and biopharmaceutical products. They can be used as therapeutics in a variety of diseases. With the rapid expansion of proteomic studies and biomarker discovery, there is a need for the generation of highly specific binding reagents to study the vast number of proteins encoded by the genome. Display technologies provide powerful tools for obtaining antibodies. Aside from the preservation of natural antibody repertoires, they are capable of exploiting diversity by DNA recombination to create very large libraries for selection of novel molecules. In contrast to in vivo immunization processes, display technologies allow selection of antibodies under in vitro-defined selection condition(s), resulting in enrichment of antibodies with desired properties from large populations. In addition, in vitro selection enables the isolation of antibodies against difficult antigens including self-antigens, and this can be applied to the generation of human antibodies against human targets. Display technologies can also be combined with DNA mutagenesis for antibody evolution in vitro. Some methods are amenable to automation, permitting high-throughput generation of antibodies. Ribosome display is considered as representative of the next generation of display technologies since it overcomes the limitations of cell-based display methods by using a cell-free system, offering advantages of screening larger libraries and continuously expanding new diversity during selection. Production of display-derived antibodies can be achieved by choosing one of a variety of prokaryotic and eukaryotic cell-based expression systems. In the near future, cell-free protein synthesis may be developed as an alternative for large-scale generation of antibodies.

Social Media and Mobile Apps for Health Promotion in Australian Indigenous Populations: Scoping Review

PubMed Central

Brusse, Carl; McAullay, Daniel; Dowden, Michelle

2014-01-01

Background Health promotion organizations are increasingly embracing social media technologies to engage end users in a more interactive way and to widely disseminate their messages with the aim of improving health outcomes. However, such technologies are still in their early stages of development and, thus, evidence of their efficacy is limited. Objective The study aimed to provide a current overview of the evidence surrounding consumer-use social media and mobile software apps for health promotion interventions, with a particular focus on the Australian context and on health promotion targeted toward an Indigenous audience. Specifically, our research questions were: (1) What is the peer-reviewed evidence of benefit for social media and mobile technologies used in health promotion, intervention, self-management, and health service delivery, with regard to smoking cessation, sexual health, and otitis media? and (2) What social media and mobile software have been used in Indigenous-focused health promotion interventions in Australia with respect to smoking cessation, sexual health, or otitis media, and what is the evidence of their effectiveness and benefit? Methods We conducted a scoping study of peer-reviewed evidence for the effectiveness of social media and mobile technologies in health promotion (globally) with respect to smoking cessation, sexual health, and otitis media. A scoping review was also conducted for Australian uses of social media to reach Indigenous Australians and mobile apps produced by Australian health bodies, again with respect to these three areas. Results The review identified 17 intervention studies and seven systematic reviews that met inclusion criteria, which showed limited evidence of benefit from these interventions. We also found five Australian projects with significant social media health components targeting the Indigenous Australian population for health promotion purposes, and four mobile software apps that met inclusion criteria. No evidence of benefit was found for these projects. Conclusions Although social media technologies have the unique capacity to reach Indigenous Australians as well as other underserved populations because of their wide and instant disseminability, evidence of their capacity to do so is limited. Current interventions are neither evidence-based nor widely adopted. Health promotion organizations need to gain a more thorough understanding of their technologies, who engages with them, why they engage with them, and how, in order to be able to create successful social media projects. PMID:25498835

Social media and mobile apps for health promotion in Australian Indigenous populations: scoping review.

PubMed

Brusse, Carl; Gardner, Karen; McAullay, Daniel; Dowden, Michelle

2014-12-10

Health promotion organizations are increasingly embracing social media technologies to engage end users in a more interactive way and to widely disseminate their messages with the aim of improving health outcomes. However, such technologies are still in their early stages of development and, thus, evidence of their efficacy is limited. The study aimed to provide a current overview of the evidence surrounding consumer-use social media and mobile software apps for health promotion interventions, with a particular focus on the Australian context and on health promotion targeted toward an Indigenous audience. Specifically, our research questions were: (1) What is the peer-reviewed evidence of benefit for social media and mobile technologies used in health promotion, intervention, self-management, and health service delivery, with regard to smoking cessation, sexual health, and otitis media? and (2) What social media and mobile software have been used in Indigenous-focused health promotion interventions in Australia with respect to smoking cessation, sexual health, or otitis media, and what is the evidence of their effectiveness and benefit? We conducted a scoping study of peer-reviewed evidence for the effectiveness of social media and mobile technologies in health promotion (globally) with respect to smoking cessation, sexual health, and otitis media. A scoping review was also conducted for Australian uses of social media to reach Indigenous Australians and mobile apps produced by Australian health bodies, again with respect to these three areas. The review identified 17 intervention studies and seven systematic reviews that met inclusion criteria, which showed limited evidence of benefit from these interventions. We also found five Australian projects with significant social media health components targeting the Indigenous Australian population for health promotion purposes, and four mobile software apps that met inclusion criteria. No evidence of benefit was found for these projects. Although social media technologies have the unique capacity to reach Indigenous Australians as well as other underserved populations because of their wide and instant disseminability, evidence of their capacity to do so is limited. Current interventions are neither evidence-based nor widely adopted. Health promotion organizations need to gain a more thorough understanding of their technologies, who engages with them, why they engage with them, and how, in order to be able to create successful social media projects.

Common Technologies for Environmental Research Infrastructures in ENVRIplus

NASA Astrophysics Data System (ADS)

Paris, Jean-Daniel

2016-04-01

Environmental and geoscientific research infrastructures (RIs) are dedicated to distinct aspects of the ocean, atmosphere, ecosystems, or solid Earth research, yet there is significant commonality in the way they conceive, develop, operate and upgrade their observation systems and platforms. Many environmental Ris are distributed network of observatories (be it drifting buoys, geophysical observatories, ocean-bottom stations, atmospheric measurements sites) with needs for remote operations. Most RIs have to deal with calibration and standardization issues. RIs use a variety of measurements technologies, but this variety is based on a small, common set of physical principles. All RIs have set their own research and development priorities, and developed their solution to their problems - however many problems are common across RIs. Finally, RIs may overlap in terms of scientific perimeter. In ENVRIplus we aim, for the first time, to identify common opportunities for innovation, to support common research and development across RIs on promising issues, and more generally to create a forum to spread state of the art techniques among participants. ENVRIplus activities include 1) measurement technologies: where are the common types of measurement for which we can share expertise or common development? 2) Metrology : how do we tackle together the diversified challenge of quality assurance and standardization? 3) Remote operations: can we address collectively the need for autonomy, robustness and distributed data handling? And 4) joint operations for research: are we able to demonstrate that together, RIs are able to provide relevant information to support excellent research. In this process we need to nurture an ecosystem of key players. Can we involve all the key technologists of the European RIs for a greater mutual benefit? Can we pave the way to a growing common market for innovative European SMEs, with a common programmatic approach conducive to targeted R&D? Can we develop a common metrological language adapted to the observation of our environment? We aim at creating a space for exchange on the "hardware" issues of our networks of observatories, a forum that allows fast transmission across RIs of best practices and state of the art technology, a laboratory for joint research and co-development, where research infrastructures and their communities join efforts on well-identified objectives.

Technology-Supported Learning Environments in Science Classrooms in India

ERIC Educational Resources Information Center

Gupta, Adit; Fisher, Darrell

2012-01-01

The adoption of technology has created a major impact in the field of education at all levels. Technology-supported classroom learning environments, involving modern information and communication technologies, are also entering the Indian educational system in general and the schools in Jammu region (Jammu & Kashmir State, India) in…

State of Washington Strategic Information Technology Plan.

ERIC Educational Resources Information Center

Washington State Dept. of Information Services, Olympia. Policy and Regulation Div.

The Strategic Information Technology Plan of Washington is introduced and explained. The plan is mandated by state law to create a new framework for communication and collaboration to bring together agency technology planning with the achievement of statewide information technology goals and strategies. It provides a point of reference for the…

Navigating Schools Past the Technology On-Ramp.

ERIC Educational Resources Information Center

Wasser, Judith Davidson

1996-01-01

Discussion of how to support schools in the use of technology focuses on the Hanau Model Schools Partnership in Germany, supported by TERC and the National Science Foundation, that was developed to create broad technological access in schools and to support teachers in developing connections between the technology and the curriculum. (LRW)

Pre-School Children Creating and Communicating with Digital Technologies in the Home

ERIC Educational Resources Information Center

McPake, Joanna; Plowman, Lydia; Stephen, Christine

2013-01-01

There is a limited literature on pre-school children's experiences with "digital technologies" at home and little discussion of the ways in which children harness these technologies for their own purposes. This paper discusses findings drawn from three studies that investigated the role of "domestic technologies" and…

Computer Technology Standards of Learning for Virginia's Public Schools

ERIC Educational Resources Information Center

Virginia Department of Education, 2005

2005-01-01

The Computer/Technology Standards of Learning identify and define the progressive development of essential knowledge and skills necessary for students to access, evaluate, use, and create information using technology. They provide a framework for technology literacy and demonstrate a progression from physical manipulation skills for the use of…

Factors Affecting Use of Telepresence Technology in a Global Technology Company

ERIC Educational Resources Information Center

Agnor, Robert Joseph

2013-01-01

Telepresence uses the latest video conferencing technology, with high definition video, surround sound audio, and specially constructed studios, to create a near face-to-face meeting experience. A Fortune 500 company which markets information technology has organizations distributed around the globe, and has extensive collaboration needs among…

"Future Proofing" Faculty: The Struggle To Create Technical Lifelong Learners.

ERIC Educational Resources Information Center

Nay, Fred W.; Malm, Loren D.; Malone, Bobby G.; Oliver, Brad E.; Saunders, Nancy G.; Thompson, Jay C., Jr.

College faculty can avoid investing valuable time and resources in inappropriate technologies by staying in step with technological progress. A "future proof" approach to technology recognizes and welcomes small failures, considering them part of the ongoing process of absorbing technology into the learning process. Future proofing attempts to…

Using Information and Communication Technology (ICT) to the Maximum: Learning and Teaching Biology with Limited Digital Technologies

ERIC Educational Resources Information Center

Van Rooy, Wilhelmina S.

2012-01-01

Background: The ubiquity, availability and exponential growth of digital information and communication technology (ICT) creates unique opportunities for learning and teaching in the senior secondary school biology curriculum. Digital technologies make it possible for emerging disciplinary knowledge and understanding of biological processes…

Applying Sustainable Systems Development Approach to Educational Technology Systems

ERIC Educational Resources Information Center

Huang, Albert

2012-01-01

Information technology (IT) is an essential part of modern education. The roles and contributions of technology to education have been thoroughly documented in academic and professional literature. Despite the benefits, the use of educational technology systems (ETS) also creates a significant impact on the environment, primarily due to energy…

TTC Fellowship Program | NCI Technology Transfer Center | TTC

Cancer.gov

The TTC has fellowship opportunities available to qualified candidates in the field of technology transfer. This Fellowship starts with your science, legal, and/or business background to create a new competency in technology transfer, preparing you for technology transfer positions within academia, industry, or the federal government.

The Change Book: A Blueprint for Technology Transfer.

ERIC Educational Resources Information Center

Addiction Technology Transfer Centers.

This document was developed by the Addiction Technology Transfer Center (ATTC) National Network to improve understanding about how valuable effective technology transfer is to the fields of substance abuse treatment and prevention. Technology transfer involves creating a mechanism by which a desired change is accepted, incorporated, and reinforced…

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, LEAD IN DUST WIPE MEASUREMENT TECHNOLOGY, NITON LLC, X-RAY FLUORESCENCE SPECTRUM ANALYZER, XLT-700

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) design efficient processes for conducting has created the Environmental Technology perfofl1lance tests of innovative technologies. Verification Program (E TV) to facilitate the deployment of innovative or improved environmental techn...

The Time Is Now! Creating Technology Competencies for Teacher Educators

ERIC Educational Resources Information Center

Foulger, Teresa S.; Graziano, Kevin J.; Slykhuis, David; Schmidt-Crawford, Denise; Trust, Torrey

2016-01-01

The way preservice teachers learn to use technology within their practice varies widely depending on the learning opportunities available (e.g., technology-infused teacher preparation program vs. standalone education technology course), and the knowledge, skills, and attitudes of the teacher educators within their teacher preparation programs.…

Creating Technology-Enriched Classrooms: Implementational Challenges in Turkish Education

ERIC Educational Resources Information Center

Kurt, Serhat

2014-01-01

This paper provides an overview of the status of educational technology in Turkey. In the face of severe social and economic challenges, many developing nations, including Turkey, are looking to education as a potential remedy. Recognizing that in an increasingly technology-dependent world, information and communications technology skills and…

A Review of the Literature on Remote Monitoring Technology in Incentive-Based Interventions for Health-Related Behavior Change.

PubMed

Kurti, Allison N; Davis, Danielle R; Redner, Ryan; Jarvis, Brantley P; Zvorsky, Ivori; Keith, Diana R; Bolivar, Hypatia A; White, Thomas J; Rippberger, Peter; Markesich, Catherine; Atwood, Gary; Higgins, Stephen T

2016-06-01

Use of technology (e.g., Internet, cell phones) to allow remote implementation of incentives interventions for health-related behavior change is growing. To our knowledge, there has yet to be a systematic review of this literature reported. The present report provides a systematic review of the controlled studies where technology was used to remotely implement financial incentive interventions targeting substance use and other health behaviors published between 2004 and 2015. For inclusion in the review, studies had to use technology to remotely accomplish one of the following two aims alone or in combination: (a) monitor the target behavior, or (b) deliver incentives for achieving the target goal. Studies also had to examine financial incentives (e.g., cash, vouchers) for health-related behavior change, be published in peer-reviewed journals, and include a research design that allowed evaluation of the efficacy of the incentive intervention relative to another condition (e.g., non-contingent incentives, treatment as usual). Of the 39 reports that met inclusion criteria, 18 targeted substance use, 10 targeted medication adherence or home-based health monitoring, and 11 targeted diet, exercise, or weight loss. All 39 (100%) studies used technology to facilitate remote monitoring of the target behavior, and 26 (66.7%) studies also incorporated technology in the remote delivery of incentives. Statistically significant intervention effects were reported in 71% of studies reviewed. Overall, the results offer substantial support for the efficacy of remotely implemented incentive interventions for health-related behavior change, which have the potential to increase the cost-effectiveness and reach of this treatment approach.

Influence of Shockwave Profile on Ejecta

NASA Astrophysics Data System (ADS)

Zellner, Michael B.; Dimonte, Guy; Germann, Timothy C.; Hammerberg, James E.; Rigg, Paulo A.; Stevens, Gerald D.; Turley, William D.; Buttler, William T.

2009-12-01

We investigate the relation between shock-pulse shape and the amount of micron-scale fragments ejected upon shock release at the metal/vacuum interface of shocked Sn targets. These micron-scale particles are commonly referred to as ejecta. Two shock-pulse shapes are considered: a supported shock created by impacting a Sn target with a sabot that was accelerated using a powder gun; and an unsupported or Taylor Shockwave, created by detonation of high explosive that was press-fit to the front-side of the Sn target. Ejecta production at the back-side or free-surface of the Sn coupons were characterized through use of piezoelectric pins, Asay foils, optical shadowgraphy, and x-ray attenuation.

Influence of Shockwave Profile on Ejection of Micron-Scale Material From Shocked Tin Surfaces

NASA Astrophysics Data System (ADS)

Zellner, Michael; Hammerberg, Jim; Hixson, Robert; Olson, Russel; Rigg, Paulo; Stevens, Gerald; Turley, William; Buttler, William

2008-03-01

This effort investigates the relation between shock-pulse shape and the amount of micron-scale fragments ejected (ejecta) upon shock release at the metal/vacuum interface of shocked Sn targets. Two shock-pulse shapes are considered: a supported shock created by impacting a Sn target with a sabot that was accelerated using a powder gun; and an unsupported or triangular-shaped Taylor shockwave, created by detonation of high explosive that was press-fit to the front-side of the Sn target. Ejecta production at the back-side or free-side of the Sn coupons were characterized through use of piezoelectric pins, Asay foil, optical shadowgraphy, and X-ray attenuation.

Advanced Launch Technology Life Cycle Analysis Using the Architectural Comparison Tool (ACT)

NASA Technical Reports Server (NTRS)

McCleskey, Carey M.

2015-01-01

Life cycle technology impact comparisons for nanolauncher technology concepts were performed using an Affordability Comparison Tool (ACT) prototype. Examined are cost drivers and whether technology investments can dramatically affect the life cycle characteristics. Primary among the selected applications was the prospect of improving nanolauncher systems. As a result, findings and conclusions are documented for ways of creating more productive and affordable nanolauncher systems; e.g., an Express Lane-Flex Lane concept is forwarded, and the beneficial effect of incorporating advanced integrated avionics is explored. Also, a Functional Systems Breakdown Structure (F-SBS) was developed to derive consistent definitions of the flight and ground systems for both system performance and life cycle analysis. Further, a comprehensive catalog of ground segment functions was created.

Analysis of the development of missile-borne IR imaging detecting technologies

NASA Astrophysics Data System (ADS)

Fan, Jinxiang; Wang, Feng

2017-10-01

Today's infrared imaging guiding missiles are facing many challenges. With the development of targets' stealth, new-style IR countermeasures and penetrating technologies as well as the complexity of the operational environments, infrared imaging guiding missiles must meet the higher requirements of efficient target detection, capability of anti-interference and anti-jamming and the operational adaptability in complex, dynamic operating environments. Missileborne infrared imaging detecting systems are constrained by practical considerations like cost, size, weight and power (SWaP), and lifecycle requirements. Future-generation infrared imaging guiding missiles need to be resilient to changing operating environments and capable of doing more with fewer resources. Advanced IR imaging detecting and information exploring technologies are the key technologies that affect the future direction of IR imaging guidance missiles. Infrared imaging detecting and information exploring technologies research will support the development of more robust and efficient missile-borne infrared imaging detecting systems. Novelty IR imaging technologies, such as Infrared adaptive spectral imaging, are the key to effectively detect, recognize and track target under the complicated operating and countermeasures environments. Innovative information exploring techniques for the information of target, background and countermeasures provided by the detection system is the base for missile to recognize target and counter interference, jamming and countermeasure. Modular hardware and software development is the enabler for implementing multi-purpose, multi-function solutions. Uncooled IRFPA detectors and High-operating temperature IRFPA detectors as well as commercial-off-the-shelf (COTS) technology will support the implementing of low-cost infrared imaging guiding missiles. In this paper, the current status and features of missile-borne IR imaging detecting technologies are summarized. The key technologies and its development trends of missiles' IR imaging detecting technologies are analyzed.

Applications of CRISPR genome editing technology in drug target identification and validation.

PubMed

Lu, Quinn; Livi, George P; Modha, Sundip; Yusa, Kosuke; Macarrón, Ricardo; Dow, David J

2017-06-01

The analysis of pharmaceutical industry data indicates that the major reason for drug candidates failing in late stage clinical development is lack of efficacy, with a high proportion of these due to erroneous hypotheses about target to disease linkage. More than ever, there is a requirement to better understand potential new drug targets and their role in disease biology in order to reduce attrition in drug development. Genome editing technology enables precise modification of individual protein coding genes, as well as noncoding regulatory sequences, enabling the elucidation of functional effects in human disease relevant cellular systems. Areas covered: This article outlines applications of CRISPR genome editing technology in target identification and target validation studies. Expert opinion: Applications of CRISPR technology in target validation studies are in evidence and gaining momentum. Whilst technical challenges remain, we are on the cusp of CRISPR being applied in complex cell systems such as iPS derived differentiated cells and stem cell derived organoids. In the meantime, our experience to date suggests that precise genome editing of putative targets in primary cell systems is possible, offering more human disease relevant systems than conventional cell lines.

Technologies for network-centric C4ISR

NASA Astrophysics Data System (ADS)

Dunkelberger, Kirk A.

2003-07-01

Three technologies form the heart of any network-centric command, control, communication, intelligence, surveillance, and reconnaissance (C4ISR) system: distributed processing, reconfigurable networking, and distributed resource management. Distributed processing, enabled by automated federation, mobile code, intelligent process allocation, dynamic multiprocessing groups, check pointing, and other capabilities creates a virtual peer-to-peer computing network across the force. Reconfigurable networking, consisting of content-based information exchange, dynamic ad-hoc routing, information operations (perception management) and other component technologies forms the interconnect fabric for fault tolerant inter processor and node communication. Distributed resource management, which provides the means for distributed cooperative sensor management, foe sensor utilization, opportunistic collection, symbiotic inductive/deductive reasoning and other applications provides the canonical algorithms for network-centric enterprises and warfare. This paper introduces these three core technologies and briefly discusses a sampling of their component technologies and their individual contributions to network-centric enterprises and warfare. Based on the implied requirements, two new algorithms are defined and characterized which provide critical building blocks for network centricity: distributed asynchronous auctioning and predictive dynamic source routing. The first provides a reliable, efficient, effective approach for near-optimal assignment problems; the algorithm has been demonstrated to be a viable implementation for ad-hoc command and control, object/sensor pairing, and weapon/target assignment. The second is founded on traditional dynamic source routing (from mobile ad-hoc networking), but leverages the results of ad-hoc command and control (from the contributed auctioning algorithm) into significant increases in connection reliability through forward prediction. Emphasis is placed on the advantages gained from the closed-loop interaction of the multiple technologies in the network-centric application environment.

Nailing Digital Jelly to a Virtual Tree: Tracking Emerging Technologies for Learning

ERIC Educational Resources Information Center

Serim, Ferdi; Schrock, Kathy

2008-01-01

Reliable information on emerging technologies for learning is as vital as it is difficult to come by. To meet this need, the International Society for Technology in Education organized the Emerging Technologies Task Force. Its goal is to create a database of contributions from educators highlighting their use of emerging technologies to support…

Value Creation, Appropriation, and Product Design Strategies in Technology Ecosystems: Three Essays on the Role of Complementary Technologies

ERIC Educational Resources Information Center

Miller, Cameron Dee

2017-01-01

Firms are often embedded in a technology ecosystem comprised of complementary technologies that span multiple product markets. In this dissertation, I examine how complementarity between the firm's technologies influences its strategies to create and appropriate value in the ecosystem. I investigate this overarching question in two contexts:…

An impoverished machine: challenges to human learning and instructional technology.

PubMed

Taraban, Roman

2008-08-01

Many of the limitations to human learning and processing identified by cognitive psychologists over the last 50 years still hold true, including computational constraints, low learning rates, and unreliable processing. Instructional technology can be used in classrooms and in other learning contexts to address these limitations to learning. However, creating technological innovations is not enough. As part of psychological science, the development and assessment of instructional systems should be guided by theories and practices within the discipline. The technology we develop should become an object of research like other phenomena that are studied. In the present article, I present an informal account of my own work in assessing instructional technology for engineering thermodynamics to show not only the benefits, but also the limitations, in studying the technology we create. I conclude by considering several ways of advancing the development of instructional technology within the SCiP community, including interdisciplinary research and envisioning learning contexts that differ radically from traditional learning focused on lectures and testing.

High-throughput heterogeneous catalyst research

NASA Astrophysics Data System (ADS)

Turner, Howard W.; Volpe, Anthony F., Jr.; Weinberg, W. H.

2009-06-01

With the discovery of abundant and low cost crude oil in the early 1900's came the need to create efficient conversion processes to produce low cost fuels and basic chemicals. Enormous investment over the last century has led to the development of a set of highly efficient catalytic processes which define the modern oil refinery and which produce most of the raw materials and fuels used in modern society. Process evolution and development has led to a refining infrastructure that is both dominated and enabled by modern heterogeneous catalyst technologies. Refineries and chemical manufacturers are currently under intense pressure to improve efficiency, adapt to increasingly disadvantaged feedstocks including biomass, lower their environmental footprint, and continue to deliver their products at low cost. This pressure creates a demand for new and more robust catalyst systems and processes that can accommodate them. Traditional methods of catalyst synthesis and testing are slow and inefficient, particularly in heterogeneous systems where the structure of the active sites is typically complex and the reaction mechanism is at best ill-defined. While theoretical modeling and a growing understanding of fundamental surface science help guide the chemist in designing and synthesizing targets, even in the most well understood areas of catalysis, the parameter space that one needs to explore experimentally is vast. The result is that the chemist using traditional methods must navigate a complex and unpredictable diversity space with a limited data set to make discoveries or to optimize known systems. We describe here a mature set of synthesis and screening technologies that together form a workflow that breaks this traditional paradigm and allows for rapid and efficient heterogeneous catalyst discovery and optimization. We exemplify the power of these new technologies by describing their use in the development and commercialization of a novel catalyst for the hydrodesulfurization of gasoline distillates having 50% more selectivity and 30% more activity for sulfur removal than the state-of-the-art commercial reference.

MCSDSS: A Multi-Criteria Decision Support System for Merging Geoscience Information with Natural User Interfaces, Preference Ranking, and Interactive Data Utilities

NASA Astrophysics Data System (ADS)

Pierce, S. A.; Gentle, J.

2015-12-01

The multi-criteria decision support system (MCSDSS) is a newly completed application for touch-enabled group decision support that uses D3 data visualization tools, a geojson conversion utility that we developed, and Paralelex to create an interactive tool. The MCSDSS is a prototype system intended to demonstrate the potential capabilities of a single page application (SPA) running atop a web and cloud based architecture utilizing open source technologies. The application is implemented on current web standards while supporting human interface design that targets both traditional mouse/keyboard interactions and modern touch/gesture enabled interactions. The technology stack for MCSDSS was selected with the goal of creating a robust and dynamic modular codebase that can be adjusted to fit many use cases and scale to support usage loads that range between simple data display to complex scientific simulation-based modelling and analytics. The application integrates current frameworks for highly performant agile development with unit testing, statistical analysis, data visualization, mapping technologies, geographic data manipulation, and cloud infrastructure while retaining support for traditional HTML5/CSS3 web standards. The software lifecylcle for MCSDSS has following best practices to develop, share, and document the codebase and application. Code is documented and shared via an online repository with the option for programmers to see, contribute, or fork the codebase. Example data files and tutorial documentation have been shared with clear descriptions and data object identifiers. And the metadata about the application has been incorporated into an OntoSoft entry to ensure that MCSDSS is searchable and clearly described. MCSDSS is a flexible platform that allows for data fusion and inclusion of large datasets in an interactive front-end application capable of connecting with other science-based applications and advanced computing resources. In addition, MCSDSS offers functionality that enables communication with non-technical users for policy, education, or engagement with groups around scientific topics with societal relevance.