Ergonomic task reduction prevents bone osteopenia in a rat model of upper extremity overuse

PubMed Central

BARBE, Mary F.; JAIN, Nisha X.; MASSICOTTE, Vicky S.; POPOFF, Steven N.; BARR-GILLESPIE, Ann E.

2015-01-01

We evaluated the effectiveness of ergonomic workload reduction of switching rats from a high repetition high force (HRHF) lever pulling task to a reduced force and reach rate task for preventing task-induced osteopenic changes in distal forelimb bones. Distal radius and ulna trabecular structure was examined in young adult rats performing one of three handle-pulling tasks for 12 wk: 1) HRHF, 2) low repetition low force (LRLF); or 3) HRHF for 4 wk and than LRLF thereafter (HRHF-to-LRLF). Results were compared to age-matched controls rats. Distal forelimb bones of 12-wk HRHF rats showed increased trabecular resorption and decreased volume, as control rats. HRHF-to-LRLF rats had similar trabecular bone quality as control rats; and decreased bone resorption (decreased trabecular bone volume and serum CTX1), increased bone formation (increased mineral apposition, bone formation rate, and serum osteocalcin), and decreased osteoclasts and inflammatory cytokines, than HRHF rats. Thus, an ergonomic intervention of HRHF-to-LRLF prevented loss of trabecular bone volume occurring with prolonged performance of a repetitive upper extremity task. These findings support the idea of reduced workload as an effective approach to management of work-related musculoskeletal disorders, and begin to define reach rate and load level boundaries for such interventions. PMID:25739896

A10 – UAS Control Station Ergo-nomics Considerations : Tasks CS-6 through CS-8

DOT National Transportation Integrated Search

2017-08-01

The overall objective of the control station tasks within Project A-10 is to provide the Federal Aviation Administration (FAA) with information on an ergonomic design of unmanned aircraft system (UAS) control stations which will allow safe piloting o...

Impact of novel shift handle laparoscopic tool on wrist ergonomics and task performance

PubMed Central

Yu, Denny; Lowndes, Bethany; Morrow, Missy; Kaufman, Kenton; Bingener, Juliane; Hallbeck, Susan

2015-01-01

Background Laparoscopic tool handles causing wrist flexion and extension more than 15° from neutral are considered “at-risk” for musculoskeletal strain. Therefore this study measured the impact of laparoscopic tool handle angles on wrist postures and task performance. Methods Eight surgeons performed standard and modified Fundamentals of Laparoscopic Surgery (FLS) tasks with laparoscopic tools. Tool A had three adjustable handle angle configurations, i.e., in-line 0° (A0), 30° (A30), and pistol-grip 70° (A70). Tool B was a fixed pistol-grip grasper. Participants performed FLS peg transfer, inverted peg transfer, and inverted circle-cut with each tool and handle angle. Inverted tasks were adapted from standard FLS tasks to simulate advanced tasks observed during abdominal wall surgeries, e.g., ventral hernia. Motion tracking, video-analysis, and modified NASA-TLX workload questionnaires were used to measure postures, performance (e.g., completion time and errors), and workload. Results Task performance did not differ among tools. For FLS peg transfer, self-reported physical workload was lower for B than A70, and mean wrist postures showed significantly higher flexion for in-line than pistol-grip tools (B and A70). For inverted peg transfer, workload was higher for all configurations. However, less time was spent in at-risk wrist postures for in-line (47%) than pistol-grip (93-94%), and most participants preferred Tool A. For inverted circle cut, workload did not vary across configurations, mean wrist posture was 10° closer to neutral for A0 than B, and median time in at-risk wrist postures was significantly less for A0 (43%) than B (87%). Conclusion The best ergonomic wrist positions for FLS (floor) tasks are provided by pistol-grip tools and for tasks on the abdominal wall (ventral surface) by in-line handles. Adjustable handle angle laparoscopic tools can reduce ergonomic risks for musculoskeletal strain and allow versatility for tasks alternating between

Impact of novel shift handle laparoscopic tool on wrist ergonomics and task performance.

PubMed

Yu, Denny; Lowndes, Bethany; Morrow, Missy; Kaufman, Kenton; Bingener, Juliane; Hallbeck, Susan

2016-08-01

Laparoscopic tool handles causing wrist flexion and extension more than 15° from neutral are considered "at risk" for musculoskeletal strain. Therefore, this study measured the impact of laparoscopic tool handle angles on wrist postures and task performance. Eight surgeons performed standard and modified Fundamentals of Laparoscopic Surgery (FLS) tasks with laparoscopic tools. Tool A had three adjustable handle angle configurations, i.e., in-line 0° (A0), 30° (A30), and pistol-grip 70° (A70). Tool B was a fixed pistol-grip grasper. Participants performed FLS peg transfer, inverted peg transfer, and inverted circle cut with each tool and handle angle. Inverted tasks were adapted from standard FLS tasks to simulate advanced tasks observed during abdominal wall surgeries, e.g., ventral hernia. Motion tracking, video analysis, and modified NASA-TLX workload questionnaires were used to measure postures, performance (e.g., completion time and errors), and workload. Task performance did not differ between tools. For FLS peg transfer, self-reported physical workload was lower for B than for A70, and mean wrist postures showed significantly higher flexion for in-line than for pistol-grip tools (B and A70). For inverted peg transfer, workload was higher for all configurations. However, less time was spent in at-risk wrist postures for in-line (47 %) than for pistol-grip (93-94 %), and most participants preferred Tool A. For inverted circle cut, workload did not vary across configurations, mean wrist posture was 10° closer to neutral for A0 than B, and median time in at-risk wrist postures was significantly less for A0 (43 %) than for B (87 %). The best ergonomic wrist positions for FLS (floor) tasks are provided by pistol-grip tools and for tasks on the abdominal wall (ventral surface) by in-line handles. Adjustable handle angle laparoscopic tools can reduce ergonomic risks of musculoskeletal strain and allow versatility for tasks alternating between the floor and

Dento-ergonomics: the key to energy-saving performance.

PubMed

Pollack, R

1996-04-01

The application of ergonomics to dentistry, or dento-ergonomics, can increase efficiency and prevent injury. Among the factors that need to be considered are the height and reach of staff members, the equipment being used and the distribution of tasks. By implementing the theories of ergonomics, dental care providers can prolong their interest and commitment to dentistry by making difficult or even painful tasks less stressful.

Evaluation of ergonomic physical risk factors in a truck manufacturing plant: case study in SCANIA Production Angers

PubMed Central

ZARE, Mohsen; MALINGE-OUDENOT, Agnes; HÖGLUND, Robert; BIAU, Sophie; ROQUELAURE, Yves

2015-01-01

The aims of this study were 1) to assess the ergonomic physical risk factors from practitioner’s viewpoint in a truck assembly plant with an in-house observational method and the NIOSH lifting equation, and 2) to compare the results of both methods and their differences. The in-house ergonomic observational method for truck assembly i.e. the SCANIA Ergonomics Standard (SES) and the NIOSH lifting equation were applied to evaluate physical risk factors and lifting of loads by operators. Both risk assessment approaches revealed various levels of risk, ranging from low to high. Two workstations were identified by the SES method as high risk. The NIOSH lifting index (LI) was greater than two for four lifting tasks. The results of the SES method disagreed with the NIOSH lifting equation for lifting tasks. Moreover, meaningful variations in ergonomic risk patterns were found for various truck models at each workstation. These results provide a better understanding of the physical ergonomic exposure from practitioner’s point of view in the automotive assembly plant. PMID:26423331

Evaluation of ergonomic physical risk factors in a truck manufacturing plant: case study in SCANIA Production Angers.

PubMed

Zare, Mohsen; Malinge-Oudenot, Agnes; Höglund, Robert; Biau, Sophie; Roquelaure, Yves

2016-01-01

The aims of this study were 1) to assess the ergonomic physical risk factors from practitioner's viewpoint in a truck assembly plant with an in-house observational method and the NIOSH lifting equation, and 2) to compare the results of both methods and their differences. The in-house ergonomic observational method for truck assembly i.e. the SCANIA Ergonomics Standard (SES) and the NIOSH lifting equation were applied to evaluate physical risk factors and lifting of loads by operators. Both risk assessment approaches revealed various levels of risk, ranging from low to high. Two workstations were identified by the SES method as high risk. The NIOSH lifting index (LI) was greater than two for four lifting tasks. The results of the SES method disagreed with the NIOSH lifting equation for lifting tasks. Moreover, meaningful variations in ergonomic risk patterns were found for various truck models at each workstation. These results provide a better understanding of the physical ergonomic exposure from practitioner's point of view in the automotive assembly plant.

Participatory ergonomic intervention for prevention of low back pain: assembly line redesign case.

PubMed

Bernardes, João Marcos; Wanderck, Claudia; Moro, Antônio Renato Pereira

2012-01-01

This paper gives an overview of a participatory ergonomic intervention aimed at reducing low back pain cases in the dispatch department of a catalogue and e-commerce retail company. Based on the findings of the ergonomic analysis and design committee, the company's own employees redesigned the assembly line's layout. As a result of these changes two job tasks that involved manual material handling of boxes, identified by the revised NIOSH equation as posing an increased risk for lifting-related low back pain, were totally eliminated, and the employees responsible for moving boxes from the end of the assembly line to pallets on the ground were given more control over their jobs, and these jobs were also enriched with a new, less heavy task. These results demonstrate that participatory ergonomic interventions are a viable and effective strategy to reduce the exposure to work-related physical and psychosocial risk factors for low back pain.

Effectiveness of a participatory ergonomics intervention in improving communication and psychosocial exposures.

PubMed

Laing, A C; Cole, D C; Theberge, N; Wells, R P; Kerr, M S; Frazer, M B

2007-07-01

A participatory ergonomics programme was implemented in an automotive parts manufacturing factory in which an ergonomics change team was formed, composed of members from management, the organized labour union and the research team. It was hypothesized that the participatory nature of this change process would result in enhanced worker perceptions of workplace communication dynamics, decision latitude and influence, which in conjunction with anticipated mechanical exposure reductions would lead to reduced worker pain severity. Utilizing a sister plant in the corporation as a referent group, a quasi-experimental design was employed with a longitudinal, repeat questionnaire approach to document pre-post intervention changes. Nine participatory activities (psychosocial interventions) were implemented as part of the process. Communication dynamics regarding ergonomics were significantly enhanced at the intervention plant compared to the referent plant. However, there were no significantly different changes in worker perceptions of decision latitude or influence between the two plants, nor did pain severity change. Possible explanations for these results include limited intervention intensity, context and co-intervention differences between the two plants, high plant turnover reducing the statistical power of the study and lack of sensitivity and specificity in the psychosocial measures used. Further research should include the development of psychosocial tools more specific to participatory ergonomic interventions and the assessment of the extent of change in psychosocial factors that might be associated with improvements in pain.

Impact of task design on task performance and injury risk: case study of a simulated drilling task.

PubMed

Alabdulkarim, Saad; Nussbaum, Maury A; Rashedi, Ehsan; Kim, Sunwook; Agnew, Michael; Gardner, Richard

2017-06-01

Existing evidence is limited regarding the influence of task design on performance and ergonomic risk, or the association between these two outcomes. In a controlled experiment, we constructed a mock fuselage to simulate a drilling task common in aircraft manufacturing, and examined the effect of three levels of workstation adjustability on performance as measured by productivity (e.g. fuselage completion time) and quality (e.g. fuselage defective holes), and ergonomic risk as quantified using two common methods (rapid upper limb assessment and the strain index). The primary finding was that both productivity and quality significantly improved with increased adjustability, yet this occurred only when that adjustability succeeded in reducing ergonomic risk. Supporting the inverse association between ergonomic risk and performance, the condition with highest adjustability created the lowest ergonomic risk and the best performance while there was not a substantial difference in ergonomic risk between the other two conditions, in which performance was also comparable. Practitioner Summary: Findings of this study supported a causal relationship between task design and both ergonomic risk and performance, and that ergonomic risk and performance are inversely associated. While future work is needed under more realistic conditions and a broader population, these results may be useful for task (re)design and to help cost-justify some ergonomic interventions.

Occupational ergonomics and injury prevention.

PubMed

Stobbe, T J

1996-01-01

Ergonomics is the study of people at work. The current focus is on the prevention of work-induced musculoskeletal injuries through the application of sound ergonomic principles. This chapter has briefly outlined ergonomics and its history, has described low back pain and upper extremity cumulative trauma disorders from an ergonomic perspective, and has discussed control and prevention approaches for a few scenarios. Ergonomic principles are based on a combination of science and engineering and a thorough understanding of human capabilities and limitations. When these principles are applied to the design of a job, task, process, or procedure, the incidence and severity of musculoskeletal injuries decrease. In many cases productivity and morale also improve. Workers are spared suffering, and employers are spared costs. It is hoped that this discussion will encourage more health, safety, and business professionals to learn about and apply ergonomics in their workplaces for the improvement of the worker, product, and business. Finally, many additional epidemiologic studies on the individual and joint effects of the CTD risk factors are needed. The knowledge gained from these studies will promote the more effective application of ergonomic principles to reduce worker suffering, improve products, and reduce costs.

Ergonomics for enhancing detection of machine abnormalities.

PubMed

Illankoon, Prasanna; Abeysekera, John; Singh, Sarbjeet

2016-10-17

Detecting abnormal machine conditions is of great importance in an autonomous maintenance environment. Ergonomic aspects can be invaluable when detection of machine abnormalities using human senses is examined. This research outlines the ergonomic issues involved in detecting machine abnormalities and suggests how ergonomics would improve such detections. Cognitive Task Analysis was performed in a plant in Sri Lanka where Total Productive Maintenance is being implemented to identify sensory types that would be used to detect machine abnormalities and relevant Ergonomic characteristics. As the outcome of this research, a methodology comprising of an Ergonomic Gap Analysis Matrix for machine abnormality detection is presented.

Avoid Workplace Injury through Ergonomics | Poster

Cancer.gov

Ergonomics is “the scientific study of people at work,” with the goal of reducing stress and eliminating injuries associated with overused muscles, bad posture, and repeated tasks, according to the Centers for Disease Control and Prevention (CDC). The Occupational Safety and Health Administration (OSHA) states that working ergonomically reduces muscle fatigue, increases

Excessive occupational heat exposure: a significant ergonomic challenge and health risk for current and future workers

PubMed Central

2014-01-01

Occupational heat exposure threatens the health of a worker not only when heat illness occurs but also when a worker’s performance and work capacity is impaired. Occupational contexts that involve hot and humid climatic conditions, heavy physical workloads and/or protective clothing create a strenuous and potentially dangerous thermal load for a worker. There are recognized heat prevention strategies and international thermal ergonomic standards to protect the worker. However, such standards have been developed largely in temperate western settings, and their validity and relevance is questionable for some geographical, cultural and socioeconomic contexts where the risk of excessive heat exposure can be high. There is evidence from low- and middle-income tropical countries that excessive heat exposure remains a significant issue for occupational health. Workers in these countries are likely to be at high risk of excessive heat exposure as they are densely populated, have large informal work sectors and are expected to experience substantial increases in temperature due to global climate change. The aim of this paper is to discuss current and future ergonomic risks associated with working in the heat as well as potential methods for maintaining the health and productivity of workers, particularly those most vulnerable to excessive heat exposure. PMID:25057350

Using ergonomics checkpoints to support a participatory ergonomics intervention in an industrially developing country (IDC)--a case study.

PubMed

Helali, Faramarz

2009-01-01

To achieve ergonomics awareness in 3 subsidiary companies, an intervention team was formed. The aims of this study were to implement basic ergonomics through a participatory ergonomics intervention process that can support a continuous learning process and lead to an improvement in health and safety as well as in the work systems in the organization. The findings of this study (i.e., method, continuous learning and integration) were key to making the participatory ergonomics intervention successful. Furthermore, 4 issues of the ergonomics checkpoints (i.e., work schedules, work tasks, healthy work organization and learning) for assessing the work system were found suitable for both changing work schedules and for improving the work system. This paper describes the result of this project and also the experiences gained and the conclusions reached from using the International Labour Office's ergonomics checkpoints in the industries of industrially developing country.

Developing measures for information ergonomics in knowledge work.

PubMed

Franssila, Heljä; Okkonen, Jussi; Savolainen, Reijo

2016-03-01

Information ergonomics is an evolving application domain of ergonomics focusing on the management of workload in the real-world contexts of information-intensive tasks. This study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, five key dimensions of information ergonomics were identified: contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity. In total, 24 measures focusing on the above dimensions were constructed. The measures include, for example, the number of fragmented work tasks per work day. The measures were preliminarily tested in two Finnish organisations, making use of empirical data gathered by interviews, electronic questionnaires and log data applications tracking work processes on personal computers. The measures are applicable to the evaluation of information ergonomics, even though individual measures vary with regard to the amount of work and time needed for data analysis. Practitioner Summary: The study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, 24 measures were constructed and tested empirically. The measures focus on contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity.

Corporate ergonomics programme at BCM Airdrie. Boots Contract Manufacturing.

PubMed

Smyth, Joanne

2003-01-01

The production processes at the BCM Airdrie site range from manual loading tasks in the manufacturing areas to high frequency packaging assembly tasks on the production lines. Both are jobs that are known to carry risk to musculoskeletal health, so an ergonomist was appointed to design and co-ordinate an ergonomics programme for the site to control these risks. This paper details the programme that has evolved to proactively manage musculoskeletal risks in the design of both new and existing equipment and processes. The ergonomics procedures described primarily involve the engineers from all areas of the factory, and the process for ergonomics involvement with engineering design projects is described. Shop-floor personnel involvement is considered to be an essential part of the programme and 'Ergonomics Champions' are being trained on the packing lines to monitor the risks that are sometimes introduced with the different designs of product packaging.

Study of the effectiveness of a participatory ergonomics intervention in reducing worker pain severity through physical exposure pathways.

PubMed

Laing, Andrew C; Frazer, Mardon B; Cole, Donald C; Kerr, Mickey S; Wells, Richard P; Norman, Robert W

2005-02-01

A participatory ergonomics programme was implemented in an automotive parts manufacturing factory. An ergonomics change team was formed composed of members from management and the organized labour union. It was hypothesized that the physical change projects implemented as part of this process would result in decreased worker exposures to peak and cumulative physical demands and reduced worker perceptions of physical effort and pain severity. A quasi-experimental design was employed, utilizing a sister plant in the corporation as a referent group. A longitudinal questionnaire approach was used to document pre-post changes in worker perceptions. In general, the physical change projects were rated as improvements by workers and were successful at reducing peak and/or cumulative mechanical exposures. However, there were few systematic changes in perceived effort or pain severity levels. Explanations include the confounding effects of differential production rate and staffing changes at the intervention and referent plants and/or insufficient overall intervention intensity due to a relatively short intervention period, plant and team ambivalence towards the process and the low overall impact on exposure of the particular changes implemented.

Ergonomics in the office environment

NASA Technical Reports Server (NTRS)

Courtney, Theodore K.

1993-01-01

Perhaps the four most popular 'ergonomic' office culprits are: (1) the computer or visual display terminal (VDT); (2) the office chair; (3) the workstation; and (4) other automated equipment such as the facsimile machine, photocopier, etc. Among the ergonomics issues in the office environment are visual fatigue, musculoskeletal disorders, and radiation/electromagnetic (VLF,ELF) field exposure from VDT's. We address each of these in turn and then review some regulatory considerations regarding such stressors in the office and general industrial environment.

ARBAN-A new method for analysis of ergonomic effort.

PubMed

Holzmann, P

1982-06-01

ARBAN is a method for the ergonomic analysis of work, including work situations which involve widely differing body postures and loads. The idea of the method is thal all phases of the analysis process that imply specific knowledge on ergonomics are teken over by filming equipment and a computer routine. All tasks that must be carried out by the investigator in the process of analysis are so designed that they appear as evident by the use of systematic common sense. The ARBAN analysis method contains four steps: 1. Recording of the workplace situation on video or film. 2. Coding the posture and load situation at a number of closely spaced 'frozen' situations. 3. Computerisation. 4. Evaluation of the results. The computer calculates figures for the total ergonomic stress on the whole body as well as on different parts of the body separately. They are presented as 'Ergonomic stress/ time curves', where the heavy load situations occur as peaks of the curve. The work cycle may also be divided into different tasks, where the stress and duration patterns can be compared. The integral of the curves are calculated for single-figure comparison of different tasks as well as different work situations.

Avoid Workplace Injury through Ergonomics | Poster

Cancer.gov

Ergonomics is “the scientific study of people at work,” with the goal of reducing stress and eliminating injuries associated with overused muscles, bad posture, and repeated tasks, according to the Centers for Disease Control and Prevention (CDC). The Occupational Safety and Health Administration (OSHA) states that working ergonomically reduces muscle fatigue, increases productivity, and decreases the number and severity of work-related musculoskeletal disorders (MSDs). MSDs affect the muscles, nerves, and tendons, and are a leading cause of lost workdays due to injury or illness.

Ergonomics in the operating room: protecting the surgeon.

PubMed

Rosenblatt, Peter L; McKinney, Jessica; Adams, Sonia R

2013-01-01

To review elements of an ergonomic operating room environment and describe common ergonomic errors in surgeon posture during laparoscopic and robotic surgery. Descriptive video based on clinical experience and a review of the literature (Canadian Task Force classification III). Community teaching hospital affiliated with a major teaching hospital. Gynecologic surgeons. Demonstration of surgical ergonomic principles and common errors in surgical ergonomics by a physical therapist and surgeon. The physical nature of surgery necessitates awareness of ergonomic principles. The literature has identified ergonomic awareness to be grossly lacking among practicing surgeons, and video has not been documented as a teaching tool for this population. Taking this into account, we created a video that demonstrates proper positioning of monitors and equipment, and incorrect and correct ergonomic positions during surgery. Also presented are 3 common ergonomic errors in surgeon posture: forward head position, improper shoulder elevation, and pelvic girdle asymmetry. Postural reset and motion strategies are demonstrated to help the surgeon learn techniques to counterbalance the sustained and awkward positions common during surgery that lead to muscle fatigue, pain, and degenerative changes. Correct ergonomics is a learned and practiced behavior. We believe that video is a useful way to facilitate improvement in ergonomic behaviors. We suggest that consideration of operating room setup, proper posture, and practice of postural resets are necessary components for a longer, healthier, and pain-free surgical career. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

The modulation of upper extremity musculoskeletal disorders for a knowledge worker with chiropractic care and applied ergonomics: a case study

PubMed Central

Sherrod, Charles W.; Casey, George; Dubro, Robert E.; Johnson, Dale F.

2013-01-01

Objective This report describes the case management of musculoskeletal disorders for an employee in a college work environment using both chiropractic care and applied ergonomics. Clinical Findings A 54-year-old male office worker presented with decreased motor function in both wrists; intermittent moderate-to-severe headaches; and pain or discomfort in the neck, both shoulders, left hand and wrist, and lumbosacral region resulting from injuries sustained during recreational soccer and from excessive forces and awkward postures when interacting with his home and office computer workstations. Intervention and Results Ergonomic training, surveillance, retrofitted equipment with new furniture, and an emphasis on adopting healthy work-style behaviors were applied in combination with regular chiropractic care. Baseline ergonomic job task analysis identified risk factors and delineated appropriate control measures to improve the subject's interface with his office workstation. Serial reevaluations at 3-month, 1-year, and 2-year periods recorded changes to the participant's pain, discomfort, and work-style behaviors. At end of study and relative to baseline, pain scale improved from 4/10 to 2/10; general disability improved from 4 to 0; and hand grip strength (pounds) increased from 20 to 105 (left) and 45 to 100 (right). Healthy work habits and postures adopted in the 3-month to 1-year period regressed to baseline exposures for 3 of 6 risk priorities identified in the ergonomic job task analysis. Conclusion The patient responded positively to the intervention of chiropractic care and applied ergonomics. PMID:23997724

Reduction of work-related musculoskeletal risk factors following ergonomics education of sewing machine operators.

PubMed

Bulduk, Sıdıka; Bulduk, Emre Özgür; Süren, Tufan

2017-09-01

Work-related musculoskeletal disorders (WMSDs) are a major hazard for sewing machine operators. Ergonomics education is recommended for reducing musculoskeletal disorders at workstations. This study aimed to evaluate the effect of an ergonomics education in reducing the exposure to risk factors for WMSDs among sewing machine operators. In this study of 278 workers, their exposure to the risk of WMSDs was assessed using the quick exposure check scale prior to them attending an ergonomics education programme and then again 3 months after the programme. The scores for risk exposure before the education programme were moderate for back (static) and back (dynamic), high for shoulder/arm and very high for wrist/hand and neck. The results obtained 3 months later were low for back (static) and shoulder/arm, and moderate for back (dynamic), wrist/hand and neck. Based on our results, ergonomics education can reduce the exposure to risk factors for WMSDs in the workplace.

Participatory ergonomics to reduce exposure to psychosocial and physical risk factors for low back pain and neck pain: results of a cluster randomised controlled trial.

PubMed

Driessen, Maurice T; Proper, Karin I; Anema, Johannes R; Knol, Dirk L; Bongers, Paulien M; van der Beek, Allard J

2011-09-01

This study investigated the effectiveness of the Stay@Work participatory ergonomics programme to reduce workers' exposure to psychosocial and physical risk factors. 37 departments (n=3047 workers) from four Dutch companies participated in this cluster randomised controlled trial; 19 (n=1472 workers) were randomised to an intervention group (participatory ergonomics) and 18 (n=1575 workers) to a control group (no participatory ergonomics). During a 6 h meeting guided by an ergonomist, working groups devised ergonomic measures to reduce psychosocial and physical workload and implemented them within 3months in their departments. Data on psychosocial and physical risk factors for low back pain and neck pain were collected at baseline and after 6 months. Psychosocial risk factors were measured using the Job Content Questionnaire and physical risk factors using the Dutch Musculoskeletal Questionnaire. Intervention effects were studied using multilevel analysis. Intervention group workers significantly increased on decision latitude (0.29 points; 95% CI 0.07 to 0.52) and decision authority (0.16 points; 95% CI 0.04 to 0.28) compared to control workers. However, exposure to awkward trunk working postures significantly increased in the intervention group (OR 1.86; 95% CI 1.15 to 3.01) compared to the control group. No significant differences between the intervention and control group were found for the remaining risk factors. After 6months, loss to follow-up was 35% in the intervention group and 29% in the control group. Participatory ergonomics was not effective in reducing exposure to psychosocial and physical risk factors for low back pain and neck pain among a large group of workers. ISRCTN27472278.

"Alarm-corrected" ergonomic armrest use could improve learning curves of novices on robotic simulator.

PubMed

Yang, Kun; Perez, Manuela; Hossu, Gabriela; Hubert, Nicolas; Perrenot, Cyril; Hubert, Jacques

2017-01-01

In robotic surgery, the professional ergonomic habit of using an armrest reduces operator fatigue and increases the precision of motion. We designed and validated a pressure surveillance system (PSS) based on force sensors to investigate armrest use. The objective was to evaluate whether adding an alarm to the PSS system could shorten ergonomic training and improve performance. Twenty robot and simulator-naïve participants were recruited and randomized in two groups (A and B). The PSS was installed on a robotic simulator, the dV-Trainer, to detect contact with the armrest. The Group A members completed three tasks on the dV-Trainer without the alarm, making 15 attempts at each task. The Group B members practiced the first two tasks with the alarm and then completed the final tasks without the alarm. The simulator provided an overall score reflecting the trainees' performance. We used the new concept of an "armrest load" score to describe the ergonomic habit of using the armrest. Group B had a significantly higher performance score (p < 0.001) and armrest load score (p < 0.001) than Group A from the fifth attempt of the first task to the end of the experiment. Based on the conditioned reflex effect, the alarm associated with the PSS rectified ergonomic errors and accelerated professional ergonomic habit acquisition. The combination of the PSS and alarm is effective in significantly shortening the learning curve in the robotic training process.

Ergonomics of disposable handles for minimally invasive surgery.

PubMed

Büchel, D; Mårvik, R; Hallabrin, B; Matern, U

2010-05-01

The ergonomic deficiencies of currently available minimally invasive surgery (MIS) instrument handles have been addressed in many studies. In this study, a new ergonomic pistol handle concept, realized as a prototype, and two disposable ring handles were investigated according to ergonomic properties set by new European standards. In this study, 25 volunteers performed four practical tasks to evaluate the ergonomics of the handles used in standard operating procedures (e.g., measuring a suture and cutting to length, precise maneuvering and targeting, and dissection of a gallbladder). Moreover, 20 participants underwent electromyography (EMG) tests to measure the muscle strain they experienced while carrying out the basic functions (grasp, rotate, and maneuver) in the x, y, and z axes. The data measured included the number of errors, the time required for task completion, perception of pressure areas, and EMG data. The values for usability in the test were effectiveness, efficiency, and user satisfaction. Surveys relating to the subjective rating were completed after each task for each of the three handles tested. Each handle except the new prototype caused pressure areas and pain. Extreme differences in muscle strain could not be observed for any of the three handles. Experienced surgeons worked more quickly with the prototype when measuring and cutting a suture (approximately 20%) and during precise maneuvering and targeting (approximately 20%). On the other hand, they completed the dissection task faster with the handle manufactured by Ethicon. Fewer errors were made with the prototype in dissection of the gallbladder. In contrast to the handles available on the market, the prototype was always rated as positive by the volunteers in the subjective surveys. None of the handles could fulfil all of the requirements with top scores. Each handle had its advantages and disadvantages. In contrast to the ring handles, the volunteers could fulfil most of the tasks more

[Evaluation of ergonomic load of clinical nursing procedures].

PubMed

Yan, P; Zhang, L; Li, F Y; Yang, Y; Wang, Y N; Huang, A M; Dai, Y L; Yao, H

2017-08-20

Objective: To evaluate the ergonomic load of clinical nursing procedures and to provide evidence for the prevention and management of work-related musculoskeletal disorders (WMSDs) in nurses. Methods: Based on the nursing unit characteristics and the common departments involving patient-turning procedures, 552 nurses were selected from 6 clinical departments from July to September, 2016. The ergonomic load of four types of patient-turning procedures, i.e., turning the patient's body, changing the bed linen of in-bed patients, moving patients, and chest physiotherapy, was evaluated by the on-site inspectors and self-evaluated by the operators using the Quick Exposure Check. The exposure value, exposure level, and exposure rate of WMSDs were assessed based on the procedure-related physical loads on the back, shoulders/arms, wrists/hands and neck, as well as the loads from work rhythm and work pressure. Results: All surveyed subjects were females who were aged mostly between 26-30 years (49.46%) , with a mean age of 29.66±5.28 years. These nurses were mainly from the Department of Infection (28.99%) and Spine Surgery (21.56%) . There were significant differences in the back, shoulders/arms, neck, work rhythm, and work pressure scores between different nursing procedures ( F =16.613, 5.884, 3.431, 3.222, and 5.085, respectively; P <0.05) . Patient-turning nursing procedures resulted in high to intermediate physical load in nurses. Procedures with high to low level of WMSDs exposure were patient turning (72.69%) , bed linen changing (67.15%) , patient transfer (65.82%) , and chest physiotherapy (58.34%) . In particular, patient turning was considered as very high-risk procedure, whereas others were considered as high-risk procedures. Conclusion: Patient-turning nursing procedures result in high ergonomic load in the operators. Therefore, more focus should be placed on the ergonomics of the caretakers and nurses.

Ergonomics investigation of retail ice cream operations.

PubMed

Dempsey, P G; McGorry, R R; Cotnam, J; Braun, T W

2000-04-01

A comprehensive ergonomics evaluation of retail ice cream shops, including field and laboratory data collection, was conducted using a human:workplace model approach to ergonomics practice. The goal of the evaluation was to provide recommendations to enhance the health, safety, and productivity of shop employees. Active and passive surveillance and facility walk-throughs were used to guide the selection of analyses. A primary focus of the investigation was quantifying the task demands of scooping ice cream, which have not been documented in the literature. This goal was accomplished through the use of a custom-designed instrumented ice cream scoop. Data were collected at an ice cream shop under typical conditions, while the laboratory experiment investigated task demands of ice cream scooping over a range of realistic temperatures. Manual materials handling task analyses and anthropometric evaluations comprised the majority of other analyses performed. Recommendations are presented that are applicable to the operation of retail ice cream shops that serve hard (i.e., scooped) ice cream.

Ergonomic sustainability based on the ergonomic maturity level measurement.

PubMed

Vidal, Mario Cesar; Guizze, Carmen Lucia Campos; Bonfatti, Renato José; Silva e Santos, Marcello

2012-01-01

This paper aims at the application of an ergonomic maturity model (EMM), in order to assess the ergonomic sustainability outreach of ergonomic actions. This proposition was motivated by the widespread sensation that the development of the discipline, its educational devices and related practices depends on the attitude of ergonomics practitioners rather than environmental macroergonomic conditions. Maturity modeling in this paper is undertaken as a tool for ergonomic practitioners. Thus, its foundations were uprooted from diverse fields: Clinic Psychology, Quality Management and Project Management. The paper brings about a detailled explanation of this ergonomic maturity tool. The empirical part is fulfilled by the examination - using the EMM - of four emblematic cases excerpted from our research lab ergonomic portfolio.

Assessing ergonomic risks of software: Development of the SEAT.

PubMed

Peres, S Camille; Mehta, Ranjana K; Ritchey, Paul

2017-03-01

Software utilizing interaction designs that require extensive dragging or clicking of icons may increase users' risks for upper extremity cumulative trauma disorders. The purpose of this research is to develop a Self-report Ergonomic Assessment Tool (SEAT) for assessing the risks of software interaction designs and facilitate mitigation of those risks. A 28-item self-report measure was developed by combining and modifying items from existing industrial ergonomic tools. Data were collected from 166 participants after they completed four different tasks that varied by method of input (touch or keyboard and mouse) and type of task (selecting or typing). Principal component analysis found distinct factors associated with stress (i.e., demands) and strain (i.e., response). Repeated measures analyses of variance showed that participants could discriminate the different strain induced by the input methods and tasks. However, participants' ability to discriminate between the stressors associated with that strain was mixed. Further validation of the SEAT is necessary but these results indicate that the SEAT may be a viable method of assessing ergonomics risks presented by software design. Copyright © 2016 Elsevier Ltd. All rights reserved.

Physical and psychosocial ergonomic risk factors for low back pain in automobile manufacturing workers.

PubMed

Vandergrift, Jonathan L; Gold, Judith E; Hanlon, Alexandra; Punnett, Laura

2012-01-01

To examine the association between ergonomic physical and psychosocial exposures and the risk of prevalent and incident low back pain (LBP) in a longitudinal cohort of automobile manufacturing workers. Ergonomic exposure intensity and LBP presence were determined through questionnaires at baseline (n=1181) and to workers in the same job 1 year later (n=505). Models were constructed using log-binomial regression with special attention to interactions between ergonomic exposures. Awkward back posture (prevalence ratio (PR) 1.12, 95% CI 1.07 to 1.17), hand force (PR 1.06, 95% CI 1.02 to 1.10), physical effort (PR 1.10, 95% CI 1.04 to 1.16) and whole body vibration (PR 1.04, 95% CI 1.01 to 1.08) were each associated cross-sectionally with LBP. Awkward back posture (RR 1.13, 95% CI 0.98 to 1.31) and hand force (RR 1.07, 95% CI 0.93 to 1.22) also predicted incident LBP, although estimates were statistically less precise. Neither job control, psychological demands, nor job strain was independently related to risk of incident LBP. Among participants reporting high physical ergonomic exposures and moderate to high job control, increasing job demands was associated with a reduced LBP risk (RR 0.72, 95% CI 0.52 to 1.00). Among participants reporting high physical exposures and low job control, psychological demands was associated with an increased LBP risk (RR 1.30, 95% CI 1.02 to 1.66). Psychosocial workplace interventions for LBP should prioritise jobs in which there are high physical ergonomic exposures. Future studies of LBP should examine the interactions between physical ergonomic risk factors.

Analysis of comfort and ergonomics for clinical work environments.

PubMed

Shafti, Ali; Lazpita, Beatriz Urbistondo; Elhage, Oussama; Wurdemann, Helge A; Althoefer, Kaspar

2016-08-01

Work related musculoskeletal disorders (WMSD) are a serious risk to workers' health in any work environment, and especially in clinical work places. These disorders are typically the result of prolonged exposure to non-ergonomic postures and the resulting discomfort in the workplace. Thus a continuous assessment of comfort and ergonomics is necessary. There are different techniques available to make such assessments, such as self-reports on perceived discomfort and observational scoring models based on the posture's relevant joint angles. These methods are popular in medical and industrial environments alike. However, there are uncertainties with regards to objectivity of these methods and whether they provide a full picture. This paper reports on a study about these methods and how they correlate with the activity of muscles involved in the task at hand. A wearable 4-channel electromyography (EMG) and joint angle estimation device with wireless transmission was made specifically for this study to allow continuous, long-term and real-time measurements and recording of activities. N=10 participants took part in an experiment involving a buzz-wire test at 3 different levels, with their muscle activity (EMG), joint angle scores (Rapid Upper Limb Assessment - RULA), self-reports of perceived discomfort (Borg scale) and performance score on the buzz-wire being recorded and compared. Results show that the Borg scale is not responsive to smaller changes in discomfort whereas RULA and EMG can be used to detect more detailed changes in discomfort, effort and ergonomics.

The Impact of Physical and Ergonomic Hazards on Poultry Abattoir Processing Workers: A Review.

PubMed

Harmse, Johannes L; Engelbrecht, Jacobus C; Bekker, Johan L

2016-02-06

The poultry abattoir industry continues to grow and contribute significantly to the gross domestic product in many countries. The industry expects working shifts of eight to eleven hours, during which workers are exposed to occupational hazards which include physical hazards ranging from noise, vibration, exposure to cold and ergonomic stress from manual, repetitive tasks that require force. A PubMed, Medline and Science Direct online database search, using specific keywords was conducted and the results confirmed that physical and ergonomic hazards impact on abattoir processing workers health, with harm not only to workers' health but also as an economic burden due to the loss of their livelihoods and the need for treatment and compensation in the industry. This review endeavours to highlight the contribution poultry processing plays in the development of physical agents and ergonomic stress related occupational diseases in poultry abattoir processing workers. The impact includes noise-induced hearing loss, increased blood pressure, menstrual and work related upper limb disorders. These are summarised as a quick reference guide for poultry abattoir owners, abattoir workers, poultry associations, occupational hygienists and medical practitioners to assist in the safer management of occupational health in poultry abattoirs.

The Impact of Physical and Ergonomic Hazards on Poultry Abattoir Processing Workers: A Review

PubMed Central

Harmse, Johannes L.; Engelbrecht, Jacobus C.; Bekker, Johan L.

2016-01-01

The poultry abattoir industry continues to grow and contribute significantly to the gross domestic product in many countries. The industry expects working shifts of eight to eleven hours, during which workers are exposed to occupational hazards which include physical hazards ranging from noise, vibration, exposure to cold and ergonomic stress from manual, repetitive tasks that require force. A PubMed, Medline and Science Direct online database search, using specific keywords was conducted and the results confirmed that physical and ergonomic hazards impact on abattoir processing workers health, with harm not only to workers’ health but also as an economic burden due to the loss of their livelihoods and the need for treatment and compensation in the industry. This review endeavours to highlight the contribution poultry processing plays in the development of physical agents and ergonomic stress related occupational diseases in poultry abattoir processing workers. The impact includes noise-induced hearing loss, increased blood pressure, menstrual and work related upper limb disorders. These are summarised as a quick reference guide for poultry abattoir owners, abattoir workers, poultry associations, occupational hygienists and medical practitioners to assist in the safer management of occupational health in poultry abattoirs. PMID:26861374

Green ergonomics: combining sustainability and ergonomics.

PubMed

Pilczuk, Davana; Barefield, Kevin

2014-01-01

When discussing ergonomics, the term 'sustainability' usually refers to the preservation of the human workforce. However, in 2010 Gulfstream Aerospace Corporation made a conscious effort to combine ergonomics and environmental sustainability in order to increase employee engagement for both programs. They introduced a companywide campaign called Green Ergo which is the idea of creating ergonomic solutions from scrap material found on site. This concept embraced the true meaning of 'green' and encouraged engineers and employees all across the company to design innovative green ergonomic solutions. The idea generated over 35 new ergo solutions, reduced waste production, and solved over 700 ergo problems for a fraction of the cost of newly purchased items. The demand for these items grew large enough that the company outsourced their manufacturing to a local non-profit. The Green Ergo campaign has changed the culture of the company and has increased the level of buy-in for both the ergonomics and sustainability programs.

Productivity, or quality of work as the decisive factor in marketing ergonomics? Design considerations for a new ergonomic welding-table.

PubMed

van der Veen, F; Regensburg, R E

1990-04-01

Quality tools should be designed from the starting point of adjusting tasks and equipment to human possibilities and limitations. Companies should consider an investment in ergonomic equipment as a profitable addition to indispensable productive machinery. As an example to support this statement, the authors describe the health risks of welders and the possible solutions. As the result of investigations a list of requirements was drafted for a product that would have less of the disadvantages of the products mentioned. The designed product, the 'ergonomic welding-table', aims to be a quality tool for welders working at small and medium-sized tasks. The product consists of a cabin (2.35 m wide) with a built-in ventilator for very efficient welding-fume extraction (90%-95%). Welders can set their preferred working height at any time. Another advantage is the option of performing the welding task while standing or sitting. The results of user-evaluation among welders and purchasers indicates considerable satisfaction.

Exposure assessment in different occupational groups at a hospital using Quick Exposure Check (QEC) - a pilot study.

PubMed

Ericsson, Pernilla; Björklund, Martin; Wahlström, Jens

2012-01-01

In order to test the feasibility and sensitivity of the ergonomic exposure assessment tool Quick Exposure Check (QEC), a pilot-study was conducted. The aim was to test QEC in different occupational groups to compare the exposure in the most common work task with the exposure in the work task perceived as the most strenuous for the neck/shoulder region, and to test intra-observer reliability. One experienced ergonomist observed 23 workers. The mean observation time was 45 minutes, waiting time and time for complementary questions included. The exposure scores varied between the different occupational groups as well as between workers within the occupational groups. Eighteen workers rated their most common work task as also being the most strenuous for the neck/shoulder region. For the remaining five workers, the mean exposure score were higher both for the neck and shoulder/arm in the most common work task. Intra-observer reliability shows agreement in 86% of the exposure interactions in the neck and in 71% in the shoulder/arm. QEC seems to fulfill the expectations of being a quick, sensible and practical exposure assessment tool that covers physical risk factors in the neck, upper extremities and low back.

Design and evaluation of a new ergonomic handle for instruments in minimally invasive surgery.

PubMed

Sancibrian, Ramon; Gutierrez-Diez, María C; Torre-Ferrero, Carlos; Benito-Gonzalez, Maria A; Redondo-Figuero, Carlos; Manuel-Palazuelos, Jose C

2014-05-01

Laparoscopic surgery techniques have been demonstrated to provide massive benefits to patients. However, surgeons are subjected to hardworking conditions because of the poor ergonomic design of the instruments. In this article, a new ergonomic handle design is presented. This handle is designed using ergonomic principles, trying to provide both more intuitive manipulation of the instrument and a shape that reduces the high-pressure zones in the contact with the surgeon's hand. The ergonomic characteristics of the new handle were evaluated using objective and subjective studies. The experimental evaluation was performed using 28 volunteers by means of the comparison of the new handle with the ring-handle (RH) concept in an instrument available on the market. The volunteers' muscle activation and motions of the hand, wrist, and arm were studied while they performed different tasks. The data measured in the experiment include electromyography and goniometry values. The results obtained from the subjective analysis reveal that most volunteers (64%) preferred the new prototype to the RH, reporting less pain and less difficulty to complete the tasks. The results from the objective study reveal that the hyperflexion of the wrist required for the manipulation of the instrument is strongly reduced. The new ergonomic handle not only provides important ergonomic advantages but also improves the efficiency when completing the tasks. Compared with RH instruments, the new prototype reduced the high-pressure areas and the extreme motions of the wrist. Copyright © 2014 Elsevier Inc. All rights reserved.

Evaluating the Ergonomics of Flexible Ureteroscopy.

PubMed

Ludwig, Wesley W; Lee, Gyusung; Ziemba, Justin B; Ko, Joan S; Matlaga, Brian R

2017-10-01

To date, the ergonomics of flexible ureteroscopy (URS) have not been well described. We performed a study to assess the biomechanical stresses on urologists performing URS and to investigate the effect of ureteroscope type on these parameters. Electromyography (EMG) was used to quantify the activation level of muscle groups involved in URS. Surface EMG electrodes (Delsys, Boston, MA) were placed on the right and left thenar, flexor carpi ulnaris (FCU), extensor carpi ulnaris (ECU), biceps, triceps, and deltoid. Three endoscopes were studied: single-use digital (Boston Scientific LithoVue), reusable digital (Karl Storz Flex-X c ), and reusable fiber-optic (Karl Storz Flex-X 2 ). Each ureteroscope was used to perform a set sequence of navigation and procedural tasks in a training model. EMG data were processed and normalized to compare the maximum voluntary contractions between muscle groups. Cumulative muscular workload (CMW) and average muscular work per second (AWS) were used for comparative analysis. For navigational tasks, CMW and AWS were greatest for the ECU, followed in descending order by right and left thenar, FCU, biceps, deltoid, and triceps. For procedural tasks, CMW and AWS were greatest for the right thenar, followed in descending order by the left thenar, ECU, FCU, triceps, biceps, and deltoid. During navigational tasks, both LithoVue and Flex-X c had lower CMWs for every muscle group than Flex-X 2 (p < 0.05). LithoVue and Flex-X c had similar AWS and both were lower than Flex-X 2 for the right thenar, ECU, biceps, and deltoid activation (p < 0.05). During procedural tasks, both LithoVue and Flex-X c had lower CMWs and AWS for right and left thenar, ECU, and biceps than Flex-X 2 (p < 0.05). This study provides the first description of EMG-measured ergonomics of URS. Both the single-use and reusable digital ureteroscopes have similar profiles, and both have significantly better ergonomic metrics than the reusable fiber-optic ureteroscope.

Beyond the job exposure matrix (JEM): the task exposure matrix (TEM).

PubMed

Benke, G; Sim, M; Fritschi, L; Aldred, G

2000-09-01

The job exposure matrix (JEM) has been employed to assign cumulative exposure to workers in many epidemiological studies. In these studies, where quantitative data are available, all workers with the same job title and duration are usually assigned similar cumulative exposures, expressed in mgm(-3)xyears. However, if the job is composed of multiple tasks, each with its own specific exposure profile, then assigning all workers within a job the same mean exposure can lead to misclassification of exposure. This variability of exposure within job titles is one of the major weaknesses of JEMs. A method is presented for reducing the variability in the JEM methodology, which has been called the task exposure matrix (TEM). By summing the cumulative exposures of a worker over all the tasks worked within a job title, it is possible to address the variability of exposure within the job title, and reduce possible exposure misclassification. The construction of a TEM is outlined and its application in the context of a study in the primary aluminium industry is described. The TEM was found to assign significantly different cumulative exposures to the majority of workers in the study, compared with the JEM and the degree of difference in cumulative exposure between the JEM and the TEM varied greatly between contaminants.

Comparative ergonomic assessment of manual wheelchairs by paraplegic users.

PubMed

Gil-Agudo, Angel; Solís-Mozos, Marta; del-Ama, Antonio J; Crespo-Ruiz, Beatriz; de la Peña-González, Ana Isabel; Pérez-Nombela, Soraya

2013-07-01

The aim of the present study was to describe and test the reliability of a comprehensive product-centered approach to assessing functional performance and wheelchair user perceptions on device ergonomics and satisfaction of performance. A pilot study was implemented using this approach to evaluate differences among four manual wheelchairs. Six wheelchair users with complete spinal cord injury (SCI) at the thoracic level and with no previous upper limbs impairment were recruited for this study. After finishing circuit tasks, subjects were asked to complete a questionnaire about ergonomic wheelchair characteristics (manoeuvrability, stability, comfort and ease of propulsion) and satisfaction about task performance. On the other hand, objective data were recorded during user performance as the time required to complete each test, kinetic wheelchair propulsion data obtained with two SMARTWheels® and physiological parameters (heart rate and physiological index). Kuschall Champion® and Otto Bock Voyage® wheelchairs were ranked best for most ergonomic aspects specially in manoeuvrability (p < 0.05). Less time was required to execute most of the circuit tasks in both wheelchair models (p < 0.05). This approach proposed highlight the importance of looking both kinds of information, user perception and user functional performance when evaluating a wheelchair or comparing across devices.

Assessing the Ability of a VR-Based Assembly Task Simulation to Evaluate Physical Risk Factors.

PubMed

Pontonnier, Charles; Samani, Afshin; Badawi, Marwan; Madeleine, Pascal; Dumont, Georges

2014-05-01

Nowadays the process of workstation design tends to include assessment steps in a virtual environment (VE) to evaluate the ergonomic features. These approaches are cost-effective and convenient since working directly on the digital mock-up in a VE is preferable to constructing a real physical mock-up in a real environment (RE). This study aimed at understanding the ability of a VR-based assembly tasks simulator to evaluate physical risk factors in ergonomics. Sixteen subjects performed simplified assembly tasks in RE and VE. Motion of the upper body and five muscle electromyographic activities were recorded to compute normalized and averaged objective indicators of discomfort, that is, rapid upper limb assessment score, averaged muscle activations, and total task time. Rated perceived exertion (RPE) and a questionnaire were used as subjective indicators of discomfort. The timing regime and complexity of the assembly tasks were investigated as within-subject factors. The results revealed significant differences between measured indicators in RE and VE. While objective measures indicated lower activity and exposure in VE, the subjects experienced more discomfort than in RE. Fairly good correlation levels were found between RE and VE for six of the objective indicators. This study clearly demonstrates that ergonomic studies of assembly tasks using VR are still challenging. Indeed, objective and subjective measurements of discomfort that are usually used in ergonomics to minimize the risks of work-related musculoskeletal disorders development exhibit opposite trends in RE and VE. Nevertheless, the high level of correlation found during this study indicates that the VR-based simulator can be used for such assessments.

Design considerations to improve cognitive ergonomic issues of unmanned vehicle interfaces utilizing video game controllers.

PubMed

Oppold, P; Rupp, M; Mouloua, M; Hancock, P A; Martin, J

2012-01-01

Unmanned (UAVs, UCAVs, and UGVs) systems still have major human factors and ergonomic challenges related to the effective design of their control interface systems, crucial to their efficient operation, maintenance, and safety. Unmanned system interfaces with a human centered approach promote intuitive interfaces that are easier to learn, and reduce human errors and other cognitive ergonomic issues with interface design. Automation has shifted workload from physical to cognitive, thus control interfaces for unmanned systems need to reduce mental workload on the operators and facilitate the interaction between vehicle and operator. Two-handed video game controllers provide wide usability within the overall population, prior exposure for new operators, and a variety of interface complexity levels to match the complexity level of the task and reduce cognitive load. This paper categorizes and provides taxonomy for 121 haptic interfaces from the entertainment industry that can be utilized as control interfaces for unmanned systems. Five categories of controllers were based on the complexity of the buttons, control pads, joysticks, and switches on the controller. This allows the selection of the level of complexity needed for a specific task without creating an entirely new design or utilizing an overly complex design.

Validation of ergonomic instructions in robot-assisted surgery simulator training.

PubMed

Van't Hullenaar, C D P; Mertens, A C; Ruurda, J P; Broeders, I A M J

2018-05-01

Training in robot-assisted surgery focusses mainly on technical skills and instrument use. Training in optimal ergonomics during robotic surgery is often lacking, while improved ergonomics can be one of the key advantages of robot-assisted surgery. Therefore, the aim of this study was to assess whether a brief explanation on ergonomics of the console can improve body posture and performance. A comparative study was performed with 26 surgical interns and residents using the da Vinci skills simulator (Intuitive Surgical, Sunnyvale, CA). The intervention group received a compact instruction on ergonomic settings and coaching on clutch usage, while the control group received standard instructions for usage of the system. Participants performed two sets of five exercises. Analysis was performed on ergonomic score (RULA) and performance scores provided by the simulator. Mental and physical load scores (NASA-TLX and LED score) were also registered. The intervention group performed better in the clutch-oriented exercises, displaying less unnecessary movement and smaller deviation from the neutral position of the hands. The intervention group also scored significantly better on the RULA ergonomic score in both the exercises. No differences in overall performance scores and subjective scores were detected. The benefits of a brief instruction on ergonomics for novices are clear in this study. A single session of coaching and instruction leads to better ergonomic scores. The control group showed often inadequate ergonomic scores. No significant differences were found regarding physical discomfort, mental task load and overall performance scores.

Trapezius muscle activity in using ordinary and ergonomically designed dentistry chairs.

PubMed

Haddad, O; Sanjari, M A; Amirfazli, A; Narimani, R; Parnianpour, M

2012-04-01

Most dentists complain of musculoskeletal disorders which can be caused by prolonged static posture, lack of suitable rest and other physical and psychological problems. We evaluated a chair with a new ergonomic design which incorporated forward leaning chest and arm supports. The chair was evaluated in the laboratory during task simulation and EMG analysis on 12 students and subjectively assessed by 30 professional dentists using an 18-item questionnaire. EMG activity of right and left trapezius muscles for 12 male students with no musculoskeletal disorders was measured while simulating common tasks like working on the teeth of the lower jaw. Normalized EMG data showed significant reduction (p<0.05) in all EMG recordings of the trapezius muscle. Dentists also unanimously preferred the ergonomically designed chair. Such ergonomically designed chairs should be introduced as early as possible in student training before bad postural habits are acquired.

Ergonomics Considerations in Microcomputing.

ERIC Educational Resources Information Center

Torok, Andrew G.

1984-01-01

Discusses evolution of ergonomics and development of computer ergonomics with its sub-fields of hardware ergonomics (user-equipment-related problems including workstation design); software ergonomics (problems in communication with computers); and peopleware ergonomics (psychological impact). Ergonomic features of VDTs, keyboards, and printers are…

Evaluation of the effect of a laparoscopic robotized needle holder on ergonomics and skills.

PubMed

Bensignor, Thierry; Morel, Guillaume; Reversat, David; Fuks, David; Gayet, Brice

2016-02-01

Laparoscopy generates technical and ergonomics difficulties due to limited degrees of freedom (DOF) of forceps. To reduce this limitation, a new 5-mm robotized needle holder with two intracorporeal DOF, Jaimy(®), has been developed. The aim of this study was to evaluate its effects on ergonomics and skills. Fourteen surgeons including eight senior and six residents were crossover randomized and stratified based on experience. Three suturing tasks were performed with both Jaimy(®) and a classic needle holder (NH): task 1: Peg-Board; task 2: hexagonal suture; task 3: frontal suture. Postural ergonomics of the dominant arm were evaluated with an ergonomics score (RULA score) thanks to motion capture, and muscular ergonomics with electromyography of six muscular groups (flexor and extensor carpis, biceps, triceps, deltoid, trapeze). Performance outcomes are a quantitative and qualitative score, and skills outcomes are the measurement of the number of movements and the path length travelled by the instrument. The RULA score showed a statistically improved posture with Jaimy(®) (p < 0.001). The cumulative muscular workload (CMW) of four muscles was not different. However, the CMW was in favor of the NH for the flexor carpi ulnaris (p < 0.001) and the triceps (p = 0.027). The number of movements was not different (p = 0.39) although the path length was shorter with Jaimy(®) (p = 0.012). The score for task 1 was in favor of the NH (p = 0.006) with a higher quantity score. Task 2 score was not different (p = 0.086): The quality part of the score was in favor of Jaimy(®) (p = 0.009) and the quantity part was higher with the NH (p = 0.04). The score for task 3 was higher with Jaimy(®) (p = 0.001). This study suggests that the use of a robotized needle holder improves both posture and the quality of laparoscopic sutures.

Ergonomics analyses of five joineries located in Florianópolis-SC, using the LEST Method.

PubMed

Vergara, Lizandra Lupi Garcia; Garcia, Carolina Schwinden; Miranda, Felipe Vergara

2012-01-01

Considering the goal of Ergonomic Work Analysis to establish, from the point of view of workers, safe, healthy, comfortable and efficient environments, this study propose to analyze the work situation of machine operators at five joineries from Florianópolis-SC. For this, it was applied the LEST Method to evaluate the task made by the operators, considering the physical, cognitive and organizational work environment. As results, it was identified the main ergonomics problems of these workstations, presenting an ergonomic diagnosis and their implications on health and safety of workers. As result, it was concluded that the main ergonomics problems at joineries are related with noise, with constant load of weight and with the postures taken. Besides these problems, others were diagnosed, for example, the pressure for workers to comply strictly the task stipulated and also the poor training and capacity of workers.

Ergonomic evaluation of 3D plane positioning using a mouse and a haptic device.

PubMed

Paul, Laurent; Cartiaux, Olivier; Docquier, Pierre-Louis; Banse, Xavier

2009-12-01

Preoperative planning and intraoperative assistance are needed to improve accuracy in tumour surgery. To be accepted, these processes must be efficient. An experiment was conducted to compare a mouse and a haptic device, with and without force feedback, to perform plan positioning in a 3D space. Ergonomics and performance factors were investigated during the experiment. Positioning strategies were observed. The task completion time, number of 3D orientations and failure rate were analysed. A questionnaire on ergonomics was filled out by each participant. The haptic device showed a significantly lower failure rate and was quicker and more ergonomic than the mouse. The force feedback was not beneficial to the accomplishment of the task. The haptic device is intuitive, ergonomic and more efficient than the mouse for positioning a 3D plane into a 3D space. Useful observations regarding positioning strategies will improve the integration of haptic devices into medical applications. Copyright (c) 2009 John Wiley & Sons, Ltd.

Ergonomic intervention for employed persons with rheumatic conditions.

PubMed

Allaire, Saralynn J; Backman, Catherine L; Alheresh, Rawan; Baker, Nancy A

2013-01-01

Prior articles in this series on employment and arthritis have documented the major impact arthritis and other rheumatic conditions have on employment. As expected, physically demanding job tasks, including hand use, are substantial risk factors for work limitation. Computer use has been increasing. People with arthritis may choose occupations involving extensive computer use to avoid occupations with other physical demands. But studies show many people with arthritis conditions have difficulty using computers.Ergonomic assessment and implementation helps relieve the physical and other demands of jobs. The Ergonomic Assessment Tool for Arthritis (EATA) is specifically for people with arthritis conditions. Since the EATA can be conducted off worksite, it is feasible to use with workers not wishing to disclose their condition to their employer. Available research supports the effectiveness of ergonomic intervention as a viable method to reduce work limitation for persons with arthritis. Some workers will need additional vocational intervention to remain employed long term. However, ergonomic intervention is a useful first step, as it promotes awareness of arthritis effects on work activities. Assisting workers with arthritis or other rheumatic conditions to use ergonomics to enhance their ability to work well should be an important aspect of managing these conditions.

Work-related musculoskeletal complaints: some ergonomics challenges upon the start of a new century.

PubMed

Westgaard, R H

2000-12-01

Three themes likely to be important within health-related ergonomics in the coming years are discussed. The first two themes concern methods for risk analysis of low-level biomechanical and psychosocial exposures. The third theme is approaches to successful implementation of ergonomics interventions. Evidence on the assessment of low-level biomechanical and psychosocial exposures by instrumented measurements is discussed. It is concluded that, despite recent advances in our understanding of exposure-effect associations under these exposure conditions, we must at present rely on more subjective methods, employed in a collaboration between expert and worker. This approach to risk analysis identifies in most cases critical exposures in a work situation. The focus should then be on the successful implementation of measures against those exposures, as identification alone does not solve problems. The aim of improved health for the workers further requires that the full complement of risk factors be considered, including work, leisure time and person-based risk factors. Finally, the need to put ergonomics intervention initiatives in an organisational context is emphasised, and examples of approaches used by Norwegian companies are presented.

AORN ergonomic tool 7: pushing, pulling, and moving equipment on wheels.

PubMed

Waters, Thomas; Lloyd, John D; Hernandez, Edward; Nelson, Audrey

2011-09-01

Pushing and pulling equipment in and around the OR can place high shear force demands on perioperative team members' shoulder and back muscles and joints. These high forces may lead to work-related musculoskeletal disorders. AORN Ergonomic Tool 7: Pushing, Pulling, and Moving Equipment on Wheels can help perioperative team members assess the risk of pushing and pulling tasks in the perioperative setting. The tool provides evidence-based suggestions about when assistive devices should be used for these tasks and is based on current ergonomic safety concepts, scientific evidence, and knowledge of effective technology and procedures, including equipment and devices for safe patient handling. Published by Elsevier Inc.

Ergonomics and design: its principles applied in the industry.

PubMed

Tavares, Ademario Santos; Silva, Francisco Nilson da

2012-01-01

Industrial Design encompasses both product development and optimization of production process. In this sense, Ergonomics plays a fundamental role, because its principles, methods and techniques can help operators to carry out their tasks most successfully. A case study carried out in an industry shows that the interaction among Design, Production Engineering and Materials Engineering departments may improve some aspects concerned security, comfort, efficiency and performance. In this process, Ergonomics had shown to be of essential importance to strategic decision making to the improvement of production section.

Managing ergonomics in the development of rotation between workstations in the automotive industry. A balance between health and traceability of tasks.

PubMed

Filus, Rodrigo; Partel, Luciana

2012-01-01

Abstract When the subject rotation between workstations (job rotation) is inside the organizations it's seemed that technically there are lots of restrictions to the development of an adequate system of rotation. We went from the need for an advanced ergonomic study and even possible restrictions of versatility and training of employees. The implementation of the ideal system of rotation passes through stages of development and research ergonomic study of the level of employee versatility, awareness and discussion with employees, implementation of the proposed system, feedback and audits for maintenance of the ideal sequence and time of rotation. For the success of the project there is a need for multidisciplinary involvement in the areas of manufacturing engineering, industrial engineering, human resources, medical services and manufacturing. Rotation between the tasks may mean that a worker should conduct two or more different activities in different parts of the day (ie. change between activity A and activity B "between 1 hours and 2 hours interval). An important consideration is to ensure that different activities do not present the same ergonomic risk for the same body part. The tracing of the execution of the activity is an important factor for production processes. Thus it is possible to conduct appropriate levels of training for employees and ensure safe and sustainable processes in terms of workers' health, productivity and quality.

The effect of ergonomic laparoscopic tool handle design on performance and efficiency.

PubMed

Tung, Kryztopher D; Shorti, Rami M; Downey, Earl C; Bloswick, Donald S; Merryweather, Andrew S

2015-09-01

Many factors can affect a surgeon's performance in the operating room; these may include surgeon comfort, ergonomics of tool handle design, and fatigue. A laparoscopic tool handle designed with ergonomic considerations (pistol grip) was tested against a current market tool with a traditional pinch grip handle. The goal of this study is to quantify the impact ergonomic design considerations which have on surgeon performance. We hypothesized that there will be measurable differences between the efficiency while performing FLS surgical trainer tasks when using both tool handle designs in three categories: time to completion, technical skill, and subjective user ratings. The pistol grip incorporates an ergonomic interface intended to reduce contact stress points on the hand and fingers, promote a more neutral operating wrist posture, and reduce hand tremor and fatigue. The traditional pinch grip is a laparoscopic tool developed by Stryker Inc. widely used during minimal invasive surgery. Twenty-three (13 M, 10 F) participants with no existing upper extremity musculoskeletal disorders or experience performing laparoscopic procedures were selected to perform in this study. During a training session prior to testing, participants performed practice trials in a SAGES FLS trainer with both tools. During data collection, participants performed three evaluation tasks using both handle designs (order was randomized, and each trial completed three times). The tasks consisted of FLS peg transfer, cutting, and suturing tasks. Feedback from test participants indicated that they significantly preferred the ergonomic pistol grip in every category (p < 0.05); most notably, participants experienced greater degrees of discomfort in their hands after using the pinch grip tool. Furthermore, participants completed cutting and peg transfer tasks in a shorter time duration (p < 0.05) with the pistol grip than with the pinch grip design; there was no significant difference between completion

Contextual factors affecting task distribution in two participatory ergonomic interventions: a qualitative study.

PubMed

Dixon, Shane Michael; Theberge, Nancy

2011-11-01

This article provides an analysis of the evolution of the division of labour in participatory ergonomics (PE) programmes in two worksites. The analysis is based on interviews and field observations in the worksites. In both settings there was meaningful participation by both worker and management members of ergonomic change teams (ECTs) in the hazard assessment and solution identification stages, but as the teams moved to the implementation stage, worker representatives were marginalised and the participatory nature of the programmes was severely curtailed. The removal of workers from the process was the outcome of the interplay among the type of activities pursued in the implementation stage, the skills and knowledge required to carry out those activities, and workers' limited influence in the organisational hierarchies. Findings highlight the salience of the social context in which participatory programmes are located and the importance of examining participatory programmes as they evolve over time. STATEMENT OF RELEVANCE: This article contributes to a growing literature on the process and implementation of PE programmes. The article's focus on social and organisational factors that affect the division of labour and attention to the evolution of involvement over time extend current understandings of participation in ergonomics programmes.

Surveying the comfort perception of the ergonomic design of bluetooth earphones.

PubMed

Chiu, Hsiao-Ping; Chiang, Hsin-Yu; Liu, Chien-Hsiou; Wang, Ming-Hsu; Chiou, Wen-Ko

2014-01-01

Bluetooth earphones can facilitate communications among workers engaged in manual (e.g., professional driver)or visual tasks (e.g., security guard). If workers remove their Bluetooth earphones due to poor fit, then communication effectiveness will decline, especially during manual or visual tasks. (1) To identify which design properties of Bluetooth earphones can contribute to user comfort, and (2) to identify if person characteristics (i.e., gender and ear shapes in this study) are related to differences in comfort perception during earphone use. 198 participants were recruited for this study.Individuals used four models of Bluetooth earphones in randomized order while performing computer tasks and then completed questionnaires on comfort perception specifically designed for this study. The 2 × 3 × 4 mixed design analysis of variance (ANOVA) was conducted to investigate the effects of gender, ear shape, and model condition. The results indicated that there were significant differences in model on comfort perception. For earplugs, the shape of the earphone and the elasticity of material are important ergonomic concerns to improve the comfort perception. In addition, the adjustable tail length is an important ergonomic design property for the ear-hook. The information gained in this study should be useful in improving the ergonomic fitness of Bluetooth earphones.

Ergonomic deficits in robotic gynecologic oncology surgery: a need for intervention.

PubMed

Craven, Renatta; Franasiak, Jason; Mosaly, Prithima; Gehrig, Paola A

2013-01-01

To evaluate surgeon strain using validated ergonomic assessment tools. Observational study (Canadian Task Force classification III). Academic medical center. Robotic surgeons performing gynecologic oncology surgical procedures. Videotape footage of surgeons performing robotic gynecologic oncology procedures was obtained. A human factors engineer experienced with health care ergonomics analyzed the video recordings and performed ergonomic evaluations of the surgeons. An initial evaluation was conducted using the Rapid Upper Limb Assessment (RULA) survey, an ergonomic assessment and prioritization method for determining posture, force, and frequency concerns with focus on the upper limbs. A more detailed analysis followed using the Strain Index (SI) method, which uses multiplicative interactions to identify jobs that are potentially hazardous. Seventeen hours of video recordings were analyzed, and descriptive data based on RULA/SI analysis were collected. Ergonomic evaluation of surgeon activity resulted in a mean RULA score of 6.46 (maximum possible RULA score, 7), indicating a need for further investigation. The mean SI grand score was 24.34. SI scores >10 suggest a potential for hazard to the operator. Thus, the current use of the surgical robot is potentially dangerous with regards to ergonomic positioning and should be modified. At a high-volume robotics center, there are ergonomics deficits that are hazardous to gynecologic surgeons and suggest the need for modification and intervention. A training strategy must be developed to address these ergonomic issues and knowledge deficiencies. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

A model of ergonomics intervention in industry: case study in Japan.

PubMed

Chavalitsakulchai, P; Ohkubo, T; Shahnavaz, H

1994-06-01

This paper presents the results of an ergonomics survey in four different Japanese work places. The survey consisted of two parts. In the first part, the physical and psycho-social problems of the female workers were investigated. Questionnaire techniques were used to assess musculoskeletal disorders in various parts of the body and of psycho-social stress at work as well as in the daily life situation. Furthermore, work posture analysis, task analysis, simple clinical tests and flexibility tests were conducted. In the second part, the ergonomics intervention practices in different types of Japanese work places were examined. Three different questionnaires were developed and used to collect information from representatives of employees, management and responsible governmental agents of the Department of Industrial Safety and Health, Ministry of Labor, with regard to ergonomic interventions at work places. Management, employees, and government representatives expressed desire for cooperation and participation for arrangement of the ergonomics intervention program. A model for appropriate ergonomics intervention in industry is developed with regard to physical and psycho-social problems at work. Factors influencing worker participation and the establishment of a dynamic system of ergonomics intervention at work places are discussed. Practical ways for improving the working conditions of female workers are: (i) cooperation between managers, workers, and government officers is regarded as vital for the ergonomics intervention program, (ii) worker participation, (iii) appropriate training course with regard to ergonomics education, and (iv) managerial support.

Task exposures in an office environment: a comparison of methods.

PubMed

Van Eerd, Dwayne; Hogg-Johnson, Sheilah; Mazumder, Anjali; Cole, Donald; Wells, Richard; Moore, Anne

2009-10-01

Task-related factors such as frequency and duration are associated with musculoskeletal disorders in office settings. The primary objective was to compare various task recording methods as measures of exposure in an office workplace. A total of 41 workers from different jobs were recruited from a large urban newspaper (71% female, mean age 41 years SD 9.6). Questionnaire, task diaries, direct observation and video methods were used to record tasks. A common set of task codes was used across methods. Different estimates of task duration, number of tasks and task transitions arose from the different methods. Self-report methods did not consistently result in longer task duration estimates. Methodological issues could explain some of the differences in estimates seen between methods observed. It was concluded that different task recording methods result in different estimates of exposure likely due to different exposure constructs. This work addresses issues of exposure measurement in office environments. It is of relevance to ergonomists/researchers interested in how to best assess the risk of injury among office workers. The paper discusses the trade-offs between precision, accuracy and burden in the collection of computer task-based exposure measures and different underlying constructs captures in each method.

Computer users' ergonomics and quality of life - evidence from a developing country.

PubMed

Ahmed, Ishfaq; Shaukat, Muhammad Zeeshan

2018-06-01

This study is aimed at investigating the quality of workplace ergonomics at various Pakistani organizations and quality of life of computer users working in these organizations. Two hundred and thirty-five computer users (only those employees who have to do most of their job tasks on computer or laptop, and at their office) responded by filling the questionnaire covering questions on workplace ergonomics and quality of life. Findings of the study revealed the ergonomics at those organizations was poor and unfavourable. The quality of life (both physical and mental health of the employees) of respondents was poor for employees who had unfavourable ergonomic environment. The findings thus highlight an important issue prevalent at Pakistani work settings.

Physical and psychosocial stress exposures in US dental schools: the need for expanded ergonomics training.

PubMed

Thornton, Linda J; Stuart-Buttle, Carol; Wyszynski, Theresa C; Wilson, Earlena R

2004-03-01

Dental students train in an environment similar to dentists in private practice. The literature reveals that physical and psychosocial stressors in dental schools are associated with adverse health outcomes. While dental educators have provided resources to address psychosocial factors and ergonomics training at the didactic level, the reinforcement of biomechanics at the clinic level has been overlooked. In this article the authors introduce a descriptive analysis of an ergonomics awareness program that expands the ergonomic training by including an assessment of the physical work performed by dental students in the clinic environment.

Task-based exposure assessment of nanoparticles in the workplace

NASA Astrophysics Data System (ADS)

Ham, Seunghon; Yoon, Chungsik; Lee, Euiseung; Lee, Kiyoung; Park, Donguk; Chung, Eunkyo; Kim, Pilje; Lee, Byoungcheun

2012-09-01

Although task-based sampling is, theoretically, a plausible approach to the assessment of nanoparticle exposure, few studies using this type of sampling have been published. This study characterized and compared task-based nanoparticle exposure profiles for engineered nanoparticle manufacturing workplaces (ENMW) and workplaces that generated welding fumes containing incidental nanoparticles. Two ENMW and two welding workplaces were selected for exposure assessments. Real-time devices were utilized to characterize the concentration profiles and size distributions of airborne nanoparticles. Filter-based sampling was performed to measure time-weighted average (TWA) concentrations, and off-line analysis was performed using an electron microscope. Workplace tasks were recorded by researchers to determine the concentration profiles associated with particular tasks/events. This study demonstrated that exposure profiles differ greatly in terms of concentrations and size distributions according to the task performed. The size distributions recorded during tasks were different from both those recorded during periods with no activity and from the background. The airborne concentration profiles of the nanoparticles varied according to not only the type of workplace but also the concentration metrics. The concentrations measured by surface area and the number concentrations measured by condensation particle counter, particulate matter 1.0, and TWA mass concentrations all showed a similar pattern, whereas the number concentrations measured by scanning mobility particle sizer indicated that the welding fume concentrations at one of the welding workplaces were unexpectedly higher than were those at workplaces that were engineering nanoparticles. This study suggests that a task-based exposure assessment can provide useful information regarding the exposure profiles of nanoparticles and can therefore be used as an exposure assessment tool.

Knobology in use: an experimental evaluation of ergonomics recommendations.

PubMed

Overgård, Kjell Ivar; Fostervold, Knut Inge; Bjelland, Hans Vanhauwaert; Hoff, Thomas

2007-05-01

The scientific basis for ergonomics recommendations for controls has usually not been related to active goal-directed use. The present experiment tests how different knob sizes and torques affect operator performance. The task employed is to control a pointer by the use of a control knob, and is as such an experimentally defined goal-directed task relevant to machine systems in general. Duration of use, error associated with use (overshooting of the goal area) and movement reproduction were used as performance measures. Significant differences between knob sizes were found for movement reproduction. High torques led to less overshooting as opposed to low torques. The results from duration of use showed a tendency that the differences between knob sizes were reduced from the first iteration to the second iteration. The present results indicate that the ergonomically recommended ranges of knob sizes might differently affect operator performance.

Development of ergonomics audits for bagging, haul truck and maintenance and repair operations in mining.

PubMed

Dempsey, Patrick G; Pollard, Jonisha; Porter, William L; Mayton, Alan; Heberger, John R; Gallagher, Sean; Reardon, Leanna; Drury, Colin G

2017-12-01

The development and testing of ergonomics and safety audits for small and bulk bag filling, haul truck and maintenance and repair operations in coal preparation and mineral processing plants found at surface mine sites is described. The content for the audits was derived from diverse sources of information on ergonomics and safety deficiencies including: analysis of injury, illness and fatality data and reports; task analysis; empirical laboratory studies of particular tasks; field studies and observations at mine sites; and maintenance records. These diverse sources of information were utilised to establish construct validity of the modular audits that were developed for use by mine safety personnel. User and interrater reliability testing was carried out prior to finalising the audits. The audits can be implemented using downloadable paper versions or with a free mobile NIOSH-developed Android application called ErgoMine. Practitioner Summary: The methodology used to develop ergonomics audits for three types of mining operations is described. Various sources of audit content are compared and contrasted to serve as a guide for developing ergonomics audits for other occupational contexts.

Evaluation of three ergonomic measures on productivity, physical work demands, and workload in gypsum bricklayers.

PubMed

van der Molen, Henk F; Kuijer, P Paul F M; Formanoy, Margriet; Bron, Lennart; Hoozemans, Marco J M; Visser, Bart; Frings-Dresen, Monique H W

2010-06-01

This study evaluated the effects of a combination of three ergonomic measures designed to reduce the risk of low back complaints among gypsum bricklayers. The measures focused on optimizing working height and reducing carrying distances. A within-subjects (N = 10) controlled field study was used to compare the effects of working with the ergonomic measures with those of working with conventional working methods at the worksite during the course of a full working day. Productivity, work demands, and workload were assessed. No effects were found on productivity, total work time, duration of tasks, duration of carrying, or energetic or biomechanical workload. However, the duration and frequency of working between knee and hip height during a working day increased by 25% and 15%, respectively, due to the ergonomic measures. During the finishing task, the duration and frequency of working below knee level decreased significantly by 4 min and 71 times, respectively. The limited impact of the ergonomic measures argues for additional measures to reduce the risk of low back complaints. 2010 Wiley-Liss, Inc.

Ergonomic workplace assessment in orthotic and prosthetic workshops.

PubMed

Salmani Nodooshan, H; Koohi Booshehri, S; Daneshmandi, H; Choobineh, A R

2016-10-17

In Iranian orthotic and prosthetic workshops, the majority of activities are carried out by manpower and the tasks are labor-intensive. In these workshops, ergonomic aspects of working conditions are seldom considered. This study was conducted in orthotic and prosthetic workshops with the objectives of determination of prevalence rate of MSDs among employees and assessment of ergonomics working conditions. In this cross-sectional study, all employees (n = 42; 29 males and 13 females) in 11 active orthotic and prosthetic production centers of Shiraz city participated. Data were collected using Nordic Musculoskeletal disorders Questionnaire (NMQ) and observational technique by an ergonomics checklist for assessment of working conditions. The means (SD) of age and job tenure (years) in the study individuals were 37.26 (10.21) and 12.8 (9.39), respectively. The most prevalent MSD symptoms in the past 12 months were reported in the lower back (42.9%), shoulders (40.5%) and knees (40.5%). Working conditions assessment showed that the main ergonomic problems in the workshops studied originated from awkward working posture, improper workstation design, poorly designed hand tools and incorrect manual material handling. Any interventional program for working conditions improvement should, therefore, focus on these areas.

Physical Strain and Work Ergonomics in Farmers with Disabilities.

PubMed

Nevala-Puranen, Nina; Sörensen, Lars

1997-01-01

In agriculture, occupational injuries are common, and several of them lead to permanent physical disability. The objective of this case study was to assess the strain and the ergonomic needs of four farmers (aged 34-49 years) with physical disabilities. A maximal bicycle ergometer test or an arm-crank test was done to assess their maximal heart rate (HR max ) and maximal oxygen consumption (V0 2max ). The strain at work was analyzed by measuring heart rate (HR), muscle activity (EMG), and the rating of perceived exertion (RPE). The farmers were interviewed as to possible and impossible work tasks and the ergonomic redesign measures taken to improve the work environment. The work tasks performed were mainly light or moderate work for the cardiorespiratory system according to mean HR (88-102 beats/min), the percentage of HR range (17-31% HRR), and the relative V0 2 (22-46% V0 2max ). The mean activity of the trapezius muscles was 0.4-9% of the maximal voluntary contraction (%MVC). All the participants had work tasks they were unable to perform. They had made ergonomie redesign changes mainly to the tractor. This case study showed that some agricultural work tasks were possible for farmers with physical disabilities and that the physical strain associated with these tasks was mainly light or moderate.

Integrating ergonomics into production system development--the Volvo Powertrain case.

PubMed

Neumann, W Patrick; Ekman, Marianne; Winkel, Jørgen

2009-05-01

Understanding the barriers and assists to integrating ergonomics into production system design remains a research issue. An action research case study at Volvo Powertrain/Sweden was conducted. Researchers worked collaboratively with the firm in efforts to improve the company's ability to handle ergonomics in their daily work of improving and developing production systems. Researchers observed and reflected collectively on the change process using field notes and recordings to support their observations. Observed integration barriers included both individual level issues like life events, and organisational aspects such as communication barriers between groups or assignment of tasks to people not involved in decision-making. Observed assists included the 'political reflective navigation' (c.f. Broberg, O., Hermund, I., 2004. The OHS consultant as a 'political reflective navigator' in technological change processes. International Journal of Industrial Ergonomics 33 (4), 315-326) by the project owner to find new ways to overcome barriers and anchor ergonomics into the organisation. While special 'ergonomics' groups did not survive long, progress was observed in including ergonomics in regular design groups. A cross-functional workshop that fostered discussion across organisational boundaries helped shift focus from retrofitting systems to future production systems and improve engagement of engineering teams. Progress was marked by both success and setbacks and full integration appears to require more than 2 years time. It is concluded that support by senior managers should include succession planning for personnel that are key to the change effort.

Colossal Tooling Design: 3D Simulation for Ergonomic Analysis

NASA Technical Reports Server (NTRS)

Hunter, Steve L.; Dischinger, Charles; Thomas, Robert E.; Babai, Majid

2003-01-01

The application of high-level 3D simulation software to the design phase of colossal mandrel tooling for composite aerospace fuel tanks was accomplished to discover and resolve safety and human engineering problems. The analyses were conducted to determine safety, ergonomic and human engineering aspects of the disassembly process of the fuel tank composite shell mandrel. Three-dimensional graphics high-level software, incorporating various ergonomic analysis algorithms, was utilized to determine if the process was within safety and health boundaries for the workers carrying out these tasks. In addition, the graphical software was extremely helpful in the identification of material handling equipment and devices for the mandrel tooling assembly/disassembly process.

Ergonomics policy in Indonesia.

PubMed

Sutarjo, Untung S

2007-12-01

Workers' conditions in accordance with their place of work are different from one area to another, especially in this reformation era where there are immense alterations in politics shown from the centralized government shifting to decentralization and district autonomy. Ergonomics problems in Indonesia are reviewed. In home industries, workers have to adjust themselves to their jobs, and ergonomic improvement may face significant impediments especially in small-scale industries. It is necessary to create or identify the most plausible model to be implemented in accordance with the conditions of districts, including low awareness about the relation between ergonomics and workers' productivity in producing goods and services and working processes scattered often at their own houses. As conditions conducive to ergonomics programs, district-level willingness to improve and increase the wealth of their society, recognition by businesses about the impacts of ergonomics on productivity and reduction of medical treatment costs may be mentioned. Labor unions support ergonomic improvements at production processes, and professionals and academicians are ready to assist, whereas national banks and foreign investment may encourage new technologies including ergonomics aspects. It is important to strengthen ergonomic improvement efforts in Indonesia through establishing district ergonomics improvement networks and ergonomics peer leaders with the support of continual training starting from the training of core leaders at the province level and extending to peer leaders at district level. This training should be made as simple as possible in order to facilitate innovations toward changes. Finally assistance is needed by the mentor teams in order to periodically monitor the improvements undertaken.

Ergonomics contributions to company strategies.

PubMed

Dul, Jan; Neumann, W Patrick

2009-07-01

Managers usually associate ergonomics with occupational health and safety and related legislation, not with business performance. In many companies, these decision makers seem not to be positively motivated to apply ergonomics for reasons of improving health and safety. In order to strengthen the position of ergonomics and ergonomists in the business and management world, we discuss company strategies and business goals to which ergonomics could contribute. Conceptual models are presented and examples are given to illustrate: (1) the present situation in which ergonomics is not part of regular planning and control cycles in organizations to ensure business performance; and (2) the desired situation in which ergonomics is an integrated part of strategy formulation and implementation. In order to realize the desired situation, considerable changes must take place within the ergonomics research, education and practice community by moving from a health ergonomics paradigm to a business ergonomics paradigm, without losing the health and safety goals.

A Comparison of Two Methods Used for Ranking Task Exposure Levels Using Simulated Multi-Task Data

DTIC Science & Technology

1999-12-17

OF OKLAHOMA HEALTH SCIENCES CENTER GRADUATE COLLEGE A COMPARISON OF TWO METHODS USED FOR RANKING TASK EXPOSURE LEVELS USING SIMULATED MULTI-TASK...COSTANTINO Oklahoma City, Oklahoma 1999 ^ooo wx °^ A COMPARISON OF TWO METHODS USED FOR RANKING TASK EXPOSURE LEVELS USING SIMULATED MULTI-TASK DATA... METHODS AND MATERIALS 9 TV. RESULTS 14 V. DISCUSSION AND CONCLUSION 28 LIST OF REFERENCES 31 APPENDICES 33 Appendix A JJ -in Appendix B Dl IV

AORN Ergonomic Tool 5: Tissue Retraction in the Perioperative Setting.

PubMed

Spera, Patrice; Lloyd, John D; Hernandez, Edward; Hughes, Nancy; Petersen, Carol; Nelson, Audrey; Spratt, Deborah G

2011-07-01

Manual retraction, a task performed to expose the surgical site, poses a high risk for musculoskeletal disorders that affect the hands, arms, shoulders, neck, and back. In recent years, minimally invasive and laparoscopic procedures have led to the development of multifunctional instruments and retractors capable of performing these functions that, in many cases, has eliminated the need for manual retraction. During surgical procedures that are not performed endoscopically, the use of self-retaining retractors enables the assistant to handle tissue and use exposure techniques that do not require prolonged manual retraction. Ergonomic Tool #5: Tissue Retraction in the Perioperative Setting provides an algorithm for perioperative care providers to determine when and under what circumstances manual retraction of tissue is safe and when the use of a self-retaining retractor should be considered. Published by Elsevier Inc.

Ergonomics and regulatory politics: the Washington State case.

PubMed

Silverstein, Michael

2007-05-01

Every year in the State of Washington more than 50,000 workers experience a work related musculoskeletal disorder (WMSD), making up more than 30% of all worker compensation cases. In 2000, the Washington State Department of Labor and Industries (L&I) adopted a workplace ergonomics rule requiring employers to reduce worker exposure to hazards that cause or contribute to WMSDs. In 2003, the ergonomics rule was repealed by a margin of 53.5-46.5 in a statewide voter initiative. The official rulemaking record of approximately 100,000 pages, along with supplementary published and unpublished material, was reviewed. The relationship between scientific deliberation and the public policy process in adopting and repealing the ergonomics rule was assessed and described. The deliberative features of the regulatory, judicial, legislative, and ballot processes were compared. The ergonomics rule was successful in the regulatory and legal arenas where the process was most transparent and open to public involvement, differing views could be presented fully, and decision makers were expected to explain their decisions in light of the record. The rule fared most poorly in the legislature and at the ballot box when these features were lost and where considered deliberation was replaced by unconstrained political conflict. Additional checks and balances are needed.

Risk assessments using the Strain Index and the TLV for HAL, Part I: Task and multi-task job exposure classifications.

PubMed

Kapellusch, Jay M; Bao, Stephen S; Silverstein, Barbara A; Merryweather, Andrew S; Thiese, Mathew S; Hegmann, Kurt T; Garg, Arun

2017-12-01

The Strain Index (SI) and the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value for Hand Activity Level (TLV for HAL) use different constituent variables to quantify task physical exposures. Similarly, time-weighted-average (TWA), Peak, and Typical exposure techniques to quantify physical exposure from multi-task jobs make different assumptions about each task's contribution to the whole job exposure. Thus, task and job physical exposure classifications differ depending upon which model and technique are used for quantification. This study examines exposure classification agreement, disagreement, correlation, and magnitude of classification differences between these models and techniques. Data from 710 multi-task job workers performing 3,647 tasks were analyzed using the SI and TLV for HAL models, as well as with the TWA, Typical and Peak job exposure techniques. Physical exposures were classified as low, medium, and high using each model's recommended, or a priori limits. Exposure classification agreement and disagreement between models (SI, TLV for HAL) and between job exposure techniques (TWA, Typical, Peak) were described and analyzed. Regardless of technique, the SI classified more tasks as high exposure than the TLV for HAL, and the TLV for HAL classified more tasks as low exposure. The models agreed on 48.5% of task classifications (kappa = 0.28) with 15.5% of disagreement between low and high exposure categories. Between-technique (i.e., TWA, Typical, Peak) agreement ranged from 61-93% (kappa: 0.16-0.92) depending on whether the SI or TLV for HAL was used. There was disagreement between the SI and TLV for HAL and between the TWA, Typical and Peak techniques. Disagreement creates uncertainty for job design, job analysis, risk assessments, and developing interventions. Task exposure classifications from the SI and TLV for HAL might complement each other. However, TWA, Typical, and Peak job exposure techniques all have

Green ergonomics: definition and scope.

PubMed

Thatcher, Andrew

2013-01-01

This paper demonstrates that the goals of ergonomics (i.e. effectiveness, efficiency, health, safety and usability) are closely aligned with the goals of design for environmental sustainability. In this paper, the term 'green ergonomics' is conceptualised to specifically describe ergonomics interventions with a pro-nature emphasis. Green ergonomics is focused on the bi-directional connections between human systems and nature. This involves looking at (1) how ergonomics design and evaluation might be used to conserve, preserve, and restore nature and (2) how ecosystem services might be harnessed to facilitate the improved wellbeing and effectiveness of human systems. The paper proposes the scope of green ergonomics based on these bi-directional relationships in the areas of the design of low resource systems and products, the design of green jobs, and the design for behaviour change. Suggestions for further work in the green ergonomics domain are also made. Given the enormous environmental challenges facing modern industrial society, this paper encourages ergonomics science to embrace a pro-nature understanding of work design and research. This paper sets out the role for green ergonomics based on an appreciation of the human-nature connections that have been integrated with our understanding of ergonomics science and practice.

Ergonomics in Dentistry

PubMed Central

Bhat, Manohar; Mohammed, Tahir; Bansal, Nikita; Gupta, Gaurav

2014-01-01

ABSTRACT Ergonomics is much broader than preventing work‑related musculoskeletal disorders. The successful application of ergo‑ nomics assures high productivity, avoidance of illnesses and injuries, and increased satisfaction among workers. Unsuc‑ cessful application, on the other hand, can lead to work‑related musculoskeletal disorders (MSDs). This article sets forth broad important background information on ergonomics so that the dental practitioner can have a general awareness of ergonomic risk factors as well as some basis for understanding the ongo‑ ing dialogue about ergonomics, its diagnosis, treatment, and regulation. This article provides alternatives to be considered by the practitioner in light of the practitioner's own circumstances, experiences and goals. A practitioner wishing to improve his or her work environment, for whatever reason, may wish to follow an incremental approach to such efforts, as is briefy discussed here. How to cite this article: Gupta A, Bhat M, Mohammed T, Bansal N, Gupta G. Ergonomics in Dentistry. Int J Clin Pediatr Dent 2014;7(1):30-34. PMID:25206234

Ergonomics in dentistry.

PubMed

Gupta, Anshul; Bhat, Manohar; Mohammed, Tahir; Bansal, Nikita; Gupta, Gaurav

2014-01-01

Ergonomics is much broader than preventing work‑related musculoskeletal disorders. The successful application of ergo‑ nomics assures high productivity, avoidance of illnesses and injuries, and increased satisfaction among workers. Unsuc‑ cessful application, on the other hand, can lead to work‑related musculoskeletal disorders (MSDs). This article sets forth broad important background information on ergonomics so that the dental practitioner can have a general awareness of ergonomic risk factors as well as some basis for understanding the ongo‑ ing dialogue about ergonomics, its diagnosis, treatment, and regulation. This article provides alternatives to be considered by the practitioner in light of the practitioner's own circumstances, experiences and goals. A practitioner wishing to improve his or her work environment, for whatever reason, may wish to follow an incremental approach to such efforts, as is briefy discussed here. How to cite this article: Gupta A, Bhat M, Mohammed T, Bansal N, Gupta G. Ergonomics in Dentistry. Int J Clin Pediatr Dent 2014;7(1):30-34.

Ergonomic assessment of airport shuttle driver tasks using an ergonomic analysis toolset.

PubMed

Çakıt, Erman

2018-06-01

This study aimed to (a) evaluate strength requirements and lower back stresses during lifting and baggage handling tasks with the 3D Static Strength Prediction Program (3DSSPP) and (b) provide additional analyses using rapid entire body assessment (REBA) and the NASA task load index (TLX) to assess the risks associated with the tasks. Four healthy female shuttle drivers of good health aged between 55 and 60 years were observed and interviewed in an effort to determine the tasks required of their occupations. The results indicated that lifting bags and placing them in a shuttle were high risk for injury and possible changes should be further investigated. The study concluded there was a potential for injury associated with baggage storing and retrieval tasks of a shuttle driver.

A group-level approach to analyzing participative ergonomics (PE) effectiveness: The relationship between PE dimensions and employee exposure to injuries.

PubMed

Morag, Ido; Luria, Gil

2018-04-01

Most studies concerned with participative ergonomic (PE) interventions, focus on organizational rather than group level analysis. By implementing an intervention at a manufacturing plant, the current study, utilizing advanced information systems, measured the effect of line-supervisor leadership on employee exposure to risks. The study evaluated which PE dimensions (i.e., extent of workforce involvement, diversity of reporter role types and scope of analysis) are related to such exposure at the group level. The data for the study was extracted from two separate computerized systems (workforce medical records of 791 employees and an intranet reporting system) during a two-year period. While the results did not confirm the effect of line-supervisor leadership on subordinates' exposure to risks, they did demonstrate relationships between PE dimensions and the employees' exposure to risks. The results support the suggested level of analysis and demonstrate that group-based analysis facilitates the assimilation of preventive interventions. Copyright © 2017 Elsevier Ltd. All rights reserved.

[Ergonomic risk assessment: aspects applicable in the light of current standards].

PubMed

Baracco, A; Perrelli, F; Romano, C

2010-01-01

The Italian decree law 81/2008 mentions the application of ergonomic principles as a basic tool for the prevention. In this regulation we can not find the definition either of Ergonomics nor of the competences required for its correct application. The Authors consider that occupational physicians have a suitable competence and knowledge on the matter, thanks to their highly specialized training. Actually, the ergonomic doctrine shows up in the daily practice of occupational physicians, who regularly base their activity on the evaluation of the binomial "worker-task": in the management of fitness to work judgements they try to combine operating conditions with worker's psychophysical state, not confining themselves to a simple expression ofa medico-legal certificate. However, the legislative references to specific regulations raise difficulties to occupational physicians in dealing with aspects such as gender, age, reference values and methodological choices. The Authors debate these difficulties in the application of rules.

Ergonomic evaluation of a wheelchair transportation securement system.

PubMed

Ahmed, Madiha; Campbell-Kyureghyan, Naira; Frost, Karen; Bertocci, Gina

2012-01-01

The Americans with Disabilities Act (ADA) specifies guidelines covering the securement system and environment for wheeled mobility device (WhMD) passengers on the public bus system in the United States, referred to as the wheelchair tiedown and occupant restraint system (WTORS). The misuse or disuse of the WTORS system can be a source of injury for WhMD passengers riding the buses. The purpose of this study was to quantify the risks posed to the bus driver while performing the WTORS procedure using traditional ergonomic analysis methods. Four bus drivers completed the WTORS procedure for a representative passenger seated in three different WhMDs: manual wheelchair (MWC), scooter (SCTR), and power wheelchair (PWC). Potential work-related risks were identified using the four most applicable ergonomic assessment tools: PLIBEL, RULA, REBA, and iLMM. Task evaluation results revealed high levels of risk to be present to drivers during the WTORS procedure. The securement station space design and equipment layout were identified as contributing factors forcing drivers to adopt awkward postures while performing the WTORS task. These risk factors are known contributors to injury and the drivers could opt to improperly secure the passengers to avoid that risk.

Development of a Task-Exposure Matrix (TEM) for Pesticide Use (TEMPEST).

PubMed

Dick, F D; Semple, S E; van Tongeren, M; Miller, B G; Ritchie, P; Sherriff, D; Cherrie, J W

2010-06-01

Pesticides have been associated with increased risks for a range of conditions including Parkinson's disease, but identifying the agents responsible has proven challenging. Improved pesticide exposure estimates would increase the power of epidemiological studies to detect such an association if one exists. Categories of pesticide use were identified from the tasks reported in a previous community-based case-control study in Scotland. Typical pesticides used in each task in each decade were identified from published scientific and grey literature and from expert interviews, with the number of potential agents collapsed into 10 groups of pesticides. A pesticide usage database was then created, using the task list and the typical pesticide groups employed in those tasks across seven decades spanning the period 1945-2005. Information about the method of application and concentration of pesticides used in these tasks was then incorporated into the database. A list was generated of 81 tasks involving pesticide exposure in Scotland covering seven decades producing a total of 846 task per pesticide per decade combinations. A Task-Exposure Matrix for PESTicides (TEMPEST) was produced by two occupational hygienists who quantified the likely probability and intensity of inhalation and dermal exposures for each pesticide group for a given use during each decade. TEMPEST provides a basis for assessing exposures to specific pesticide groups in Scotland covering the period 1945-2005. The methods used to develop TEMPEST could be used in a retrospective assessment of occupational exposure to pesticides for Scottish epidemiological studies or adapted for use in other countries.

Determination of an Ergonomically Sound Glovebox Glove Port Center Line

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christman, Marissa St; Land, Whitney Morgan

2016-11-30

Determine an ergonomic glovebox glove port center line location which will be used for standardization in new designs, thus allowing for predictable human work performance, reduced worker exposure to radiation and musculoskeletal injury risks, and improved worker comfort, efficiency, health, and safety.

Sex Differences in Task Distribution and Task Exposures among Danish House Painters: An Observational Study Combining Questionnaire Data with Biomechanical Measurements

PubMed Central

Heilskov-Hansen, Thomas; Wulff Svendsen, Susanne; Frølund Thomsen, Jane; Mikkelsen, Sigurd; Hansson, Gert-Åke

2014-01-01

Objectives Sex differences in occupational biomechanical exposures may be part of the explanation why musculoskeletal complaints and disorders tend to be more common among women than among men. We aimed to determine possible sex differences in task distribution and task-specific postures and movements of the upper extremities among Danish house painters, and to establish sex-specific task exposure matrices. Methods To obtain task distributions, we sent out a questionnaire to all members of the Painters' Union in Denmark (N = 9364), of whom 53% responded. Respondents reported their task distributions in a typical week. To obtain task exposures, postures and movements were measured in 25 male and 25 female house painters for one whole working day per person. We used goniometers on the wrists, and inclinometers on the forehead and the upper arms. Participants filled in a logbook allowing task-specific exposures to be identified. Percentiles and % time with non-neutral postures were used to characterise postures. Velocity, range of motion, repetitiveness, and variation were used as measures of movement. Cochran-Mantel-Haenszel statistics and unpaired double-sided t-tests with post-hoc Bonferroni correction were used to evaluate sex differences. Results Statistically significant (p<0.05) sex differences were revealed in task proportions, but the proportions differed by less than 4%. For task exposures, no statistically significant sex differences were found. Conclusions Only minor sex differences were found in task distribution and task exposures regarding postures and movements among Danish house painters. Sex-specific task exposure matrices were established. PMID:25365301

The dentist's operating posture - ergonomic aspects.

PubMed

Pîrvu, C; Pătraşcu, I; Pîrvu, D; Ionescu, C

2014-06-15

The practice of dentistry involves laborious high finesse dental preparations, precision and control in executions that require a particular attention, concentration and patience of the dentist and finally the dentist's physical and mental resistance. The optimal therapeutic approach and the success of practice involve special working conditions for the dentist and his team in an ergonomic environment. The meaning of the posture in ergonomics is the manner in which different parts of the body are located and thus the reports are established between them in order to allow a special task execution. This article discusses the posture adopted by dentists when they work, beginning with the balanced posture and going to different variants of posture. The ideal posture of a dentist gives him, on the one hand the optimal working conditions (access, visibility and control in the mouth) and on the other hand, physical and psychological comfort throughout the execution of the clinical acts. Although the theme of dentist posture is treated with great care and often presented in the undergraduate courses and the continuing education courses on ergonomics in dentistry, many dentists do not know the subject well enough nor the theoretical issues and therefore nor the practical applicability. The risk and perspective of the musculoskeletal disorders related to unbalanced postures should determine the dentists take postural corrective actions and compensation measures in order to limit the negative effects of working in a bad posture.

PRN 2009-1: Establishment of Antimicrobial Exposure Assessment Task Force II

EPA Pesticide Factsheets

This PR notice announces the establishment of the Antimicrobial Exposure Assessment Task Force II, an industry-wide task force to develop mixer, loader, applicator and post-application exposure data for antimicrobial pesticides used in various settings.

An ergonomic intervention to reduce musculoskeletal discomfort among semiconductor assembly workers.

PubMed

Aghilinejad, Mashallah; Azar, Neda Soleimanvandy; Ghasemi, Mohammad Sadegh; Dehghan, Naser; Mokamelkhah, Elahe Kabir

2016-06-14

Work-related musculoskeletal disorders (MSDs) and ergonomics-related injuries are the single largest category of workplace injuries and are responsible for almost 30% of all worker's compensation costs. Awkward working posture refers to positions of the body that deviate significantly from the neutral position while job tasks are being performed and it is the primary ergonomic risk factor for developing musculoskeletal discomfort. This study was conducted among assembly workers of a semiconductor in Tehran province with the objective of implementing an interventional ergonomic program to minimize musculoskeletal discomfort. This study that was conducted on 105 male assembly workers of a semiconductor industry based on a census method. The standardized Nordic Musculoskeletal Questionnaire (NMQ) was used to determine the prevalence of MSDs. Corlett and Bishop's body part discomfort scale (BPD) was applied to evaluate body discomfort before and after the intervention (using a magnifying loupes to improve visibility of the parts). The results of NMQ showed the highest rate of MSDs were in neck, shoulder, upper arm and lower back regions (more than 75%). After ergonomic intervention, significant decrements of discomfort was observed in neck, shoulder, upper arm, elbows, lower arm, lower back and whole body discomfort (p < 0.05). It can be concluded that using magnifying loupes reduced discomfort in different body regions and the whole body. A conclusion of this research is that ergonomic interventions can decrease MSDs of at risk body regions in the long term.

A review and exploration of sociotechnical ergonomics.

PubMed

Dirkse van Schalkwyk, Riaan; Steenkamp, Rigard J

2017-09-01

A holistic review of ergonomic history shows that science remains important for general occupational health and safety (OSH), the broad society, culture, politics and the design of everyday things. Science provides an unconventional and multifaceted viewpoint exploring ergonomics from a social, corporate and OSH perspective. Ergonomic solutions from this mindset may redefine the science, and it will change with companies that change within this socially hyper-connected world. Authentic corporate social responsibility will counter 'misleadership' by not approaching ergonomics with an afterthought. The review concludes that ergonomics will be stronger with social respect and ergonomic thinking based on the optimisation of anthropometric data, digital human models, computer-aided tools, self-empowerment, job enrichment, work enlargement, physiology, industrial psychology, cybernetic ergonomics, operations design, ergonomic-friendly process technologies, ergonomic empowerment, behaviour-based safety, outcome-based employee wellness and fatigue risk management solutions, to mention a few.

Quantitative assessment of airborne exposures generated during common cleaning tasks: a pilot study

PubMed Central

2010-01-01

Background A growing body of epidemiologic evidence suggests an association between exposure to cleaning products with asthma and other respiratory disorders. Thus far, these studies have conducted only limited quantitative exposure assessments. Exposures from cleaning products are difficult to measure because they are complex mixtures of chemicals with a range of physicochemical properties, thus requiring multiple measurement techniques. We conducted a pilot exposure assessment study to identify methods for assessing short term, task-based airborne exposures and to quantitatively evaluate airborne exposures associated with cleaning tasks simulated under controlled work environment conditions. Methods Sink, mirror, and toilet bowl cleaning tasks were simulated in a large ventilated bathroom and a small unventilated bathroom using a general purpose, a glass, and a bathroom cleaner. All tasks were performed for 10 minutes. Airborne total volatile organic compounds (TVOC) generated during the tasks were measured using a direct reading instrument (DRI) with a photo ionization detector. Volatile organic ingredients of the cleaning mixtures were assessed utilizing an integrated sampling and analytic method, EPA TO-17. Ammonia air concentrations were also measured with an electrochemical sensor embedded in the DRI. Results Average TVOC concentrations calculated for 10 minute tasks ranged 0.02 - 6.49 ppm and the highest peak concentrations observed ranged 0.14-11 ppm. TVOC time concentration profiles indicated that exposures above background level remained present for about 20 minutes after cessation of the tasks. Among several targeted VOC compounds from cleaning mixtures, only 2-BE was detectable with the EPA method. The ten minute average 2- BE concentrations ranged 0.30 -21 ppm between tasks. The DRI underestimated 2-BE exposures compared to the results from the integrated method. The highest concentration of ammonia of 2.8 ppm occurred during mirror cleaning

Comparative assessment of physical and cognitive ergonomics associated with robotic and traditional laparoscopic surgeries.

PubMed

Lee, Gyusung I; Lee, Mija R; Clanton, Tameka; Clanton, Tamera; Sutton, Erica; Park, Adrian E; Marohn, Michael R

2014-02-01

We conducted this study to investigate how physical and cognitive ergonomic workloads would differ between robotic and laparoscopic surgeries and whether any ergonomic differences would be related to surgeons' robotic surgery skill level. Our hypothesis is that the unique features in robotic surgery will demonstrate skill-related results both in substantially less physical and cognitive workload and uncompromised task performance. Thirteen MIS surgeons were recruited for this institutional review board-approved study and divided into three groups based on their robotic surgery experiences: laparoscopy experts with no robotic experience, novices with no or little robotic experience, and robotic experts. Each participant performed six surgical training tasks using traditional laparoscopy and robotic surgery. Physical workload was assessed by using surface electromyography from eight muscles (biceps, triceps, deltoid, trapezius, flexor carpi ulnaris, extensor digitorum, thenar compartment, and erector spinae). Mental workload assessment was conducted using the NASA-TLX. The cumulative muscular workload (CMW) from the biceps and the flexor carpi ulnaris with robotic surgery was significantly lower than with laparoscopy (p < 0.05). Interestingly, the CMW from the trapezius was significantly higher with robotic surgery than with laparoscopy (p < 0.05), but this difference was only observed in laparoscopic experts (LEs) and robotic surgery novices. NASA-TLX analysis showed that both robotic surgery novices and experts expressed lower global workloads with robotic surgery than with laparoscopy, whereas LEs showed higher global workload with robotic surgery (p > 0.05). Robotic surgery experts and novices had significantly higher performance scores with robotic surgery than with laparoscopy (p < 0.05). This study demonstrated that the physical and cognitive ergonomics with robotic surgery were significantly less challenging. Additionally, several ergonomic components

Development and evaluation of a multifaceted ergonomics program to prevent injuries associated with patient handling tasks.

PubMed

Nelson, Audrey; Matz, Mary; Chen, Fangfei; Siddharthan, Kris; Lloyd, John; Fragala, Guy

2006-08-01

significant increases in two subscales of job satisfaction: professional status and tasks requirements. Self-reports by nursing staff revealed a statistically significant decrease in the number of 'unsafe' patient handling practices performed daily. Nurses ranked program elements they deemed to be "extremely effective": equipment was rated as most effective (96%), followed by No Lift Policy (68%), peer leader education program (66%), ergonomic assessment protocol (59%), patient handling assessment criteria and decision algorithms (55%), and lastly after action reviews (41%). Perceived support and interest for the program started at a high level for managers and nursing staff and remained very high throughout the program implementation. Patient acceptance was moderate when the program started but increased to very high by the end of the program. Although the ease and success of program implementation initially varied between and within the facilities, after six months there was strong evidence of support at all levels. The initial capital investment for patient handling equipment was recovered in approximately 3.75 years based on annual post-intervention savings of over $200,000/year in workers' compensation expenses and cost savings associated with reduced lost and modified work days and worker compensation. This multi-faceted program resulted in an overall lower injury rate, fewer modified duty days taken per injury, and significant cost savings. The program was well accepted by patients, nursing staff, and administrators. Given the significant increases in two job satisfaction subscales (professional status and task requirements), it is possible that nurse recruitment and retention could be positively impacted.

Inter-rater reliability of PATH observations for assessment of ergonomic risk factors in hospital work.

PubMed

Park, Jung-Keun; Boyer, Jon; Tessler, Jamie; Casey, Jeffrey; Schemm, Linda; Gore, Rebecca; Punnett, Laura

2009-07-01

This study examined the inter-rater reliability of expert observations of ergonomic risk factors by four analysts. Ten jobs were observed at a hospital using a newly expanded version of the PATH method (Buchholz et al. 1996), to which selected upper extremity exposures had been added. Two of the four raters simultaneously observed each worker onsite for a total of 443 observation pairs containing 18 categorical exposure items each. For most exposure items, kappa coefficients were 0.4 or higher. For some items, agreement was higher both for the jobs with less rapid hand activity and for the analysts with a higher level of ergonomic job analysis experience. These upper extremity exposures could be characterised reliably with real-time observation, given adequate experience and training of the observers. The revised version of PATH is applicable to the analysis of jobs where upper extremity musculoskeletal strain is of concern.

Action in Ergonomics

ERIC Educational Resources Information Center

Training Officer, 1975

1975-01-01

A discussion with James Crowley of British Steel Corporation on the changing face of ergonomics in practice today and yesterday examines the influence of experimental psychology on the method of study and data collection. The broadening scope of ergonomics from only safety concerns to cost effectiveness and the computer are analyzed. (Author/JB)

Musculoskeletal disorder risk as a function of vehicle rotation angle during assembly tasks.

PubMed

Ferguson, Sue A; Marras, Williams S; Gary Allread, W; Knapik, Gregory G; Vandlen, Kimberly A; Splittstoesser, Riley E; Yang, Gang

2011-07-01

Musculoskeletal disorders (MSD) are costly and common problem in automotive manufacturing. The research goal was to quantify MSD exposure as a function of vehicle rotation angle and region during assembly tasks. The study was conducted at the Center for Occupational Health in Automotive Manufacturing (COHAM) Laboratory. Twelve subjects participated in the study. The vehicle was divided into seven regions, (3 interior, 2 underbody and 2 engine regions) representative of work areas during assembly. Three vehicle rotation angles were examined for each region. The standard horizontal assembly condition (0° rotation) was the reference frame. Exposure was assessed on the spine loads and posture, shoulder posture and muscle activity, neck posture and muscle activity as well as wrist posture. In all regions, rotating the vehicle reduced musculoskeletal exposure. In five of the seven regions 45° of vehicle rotation represented the position that reduced MSD exposure most. Two of the seven regions indicated 90° of vehicle rotation had the greatest impact for reducing MSD exposure. This study demonstrated that vehicle rotation shows promise for reducing exposure to risk factors for MDS during automobile assembly tasks. Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Incorporating organisational safety culture within ergonomics practice.

PubMed

Bentley, Tim; Tappin, David

2010-10-01

This paper conceptualises organisational safety culture and considers its relevance to ergonomics practice. Issues discussed in the paper include the modest contribution that ergonomists and ergonomics as a discipline have made to this burgeoning field of study and the significance of safety culture to a systems approach. The relevance of safety culture to ergonomics work with regard to the analysis, design, implementation and evaluation process, and implications for participatory ergonomics approaches, are also discussed. A potential user-friendly, qualitative approach to assessing safety culture as part of ergonomics work is presented, based on a recently published conceptual framework that recognises the dynamic and multi-dimensional nature of safety culture. The paper concludes by considering the use of such an approach, where an understanding of different aspects of safety culture within an organisation is seen as important to the success of ergonomics projects. STATEMENT OF RELEVANCE: The relevance of safety culture to ergonomics practice is a key focus of this paper, including its relationship with the systems approach, participatory ergonomics and the ergonomics analysis, design, implementation and evaluation process. An approach to assessing safety culture as part of ergonomics work is presented.

Lumbar posture and trunk muscle activation during a typing task when sitting on a novel dynamic ergonomic chair.

PubMed

O'Sullivan, Kieran; McCarthy, Raymond; White, Alison; O'Sullivan, Leonard; Dankaerts, Wim

2012-01-01

Low back pain (LBP) is a common musculoskeletal disorder and prolonged sitting often aggravates LBP. A novel dynamic ergonomic chair ('Back App'), which facilitates less hip flexion while sitting on an unstable base has been developed. This study compared lumbar posture and trunk muscle activation on this novel chair with a standard backless office chair. Twelve painfree participants completed a typing task on both chairs. Lumbar posture and trunk muscle activation were collected simultaneously and were analysed using paired t-tests. Sitting on the novel dynamic chair significantly (p < 0.05) reduced both lumbar flexion and the activation of one back muscle (Iliocostalis Lumborum pars Thoracis). The discomfort experienced was mild and was similar (p > 0.05) between chairs. Maintaining lordosis with less muscle activation during prolonged sitting could reduce the fatigue associated with upright sitting postures. Studies with longer sitting durations, and in people with LBP, are required. Sitting on a novel dynamic chair resulted in less lumbar flexion and less back muscle activation than sitting on a standard backless office chair during a typing task among pain-free participants. Facilitating lordotic sitting with less muscle activation may reduce the fatigue and discomfort often associated with lordotic sitting postures.

Ergonomics, education and children: a personal view.

PubMed

Woodcock, A

2007-10-01

Educational ergonomics - the teaching of ergonomics and the design of environments where ergonomics teaching and learning might occur - has received little attention from ergonomists. This paper first describes the roots of the author's interest and research in educational ergonomics; second it provides a personal view of the opportunities and challenges posed by the two streams of educational ergonomics; and lastly it considers the implications of teaching ergonomics to children in terms of their personal development, the design of schools and the impact such initiatives might have on wider societal problems.

Implantation of an ergonomics administration system in a company: report of an occupational therapist specialist in ergonomics.

PubMed

Moraes, Berla; Andrade, Valéria Sousa

2012-01-01

This article aims to describe step-by-step the implementation of an ergonomics administration system in a company from March 2009 till March 2011 by an occupational therapist specialist in ergonomics based on the OSHAS 18001 guidelines and the Regulatory Norms 17 manual. The process began with the definition of five requisites with bases on the manual of application of the Regulatory Norms 17: survey; materials individual transportation and discharge; workplace furniture; workplace equipments; work environment and organization of the work to be managed with bases on the OSHAS 18001 guidelines. The following steps were established: sensitization of the company high administration, elaboration and institution of an ergonomics politics, development of ergonomics committees, ergonomics analysis of the work with recommendation of ergonomic improvements, implantation of improvements and evaluation or the results. This research experiment suggests the importance not only of a guiding axle but also of a professional qualification and participation of the company on the implementation of an ergonomics management system.

Ergonomics: The Forgotten Variable.

ERIC Educational Resources Information Center

Fitterman, L. Jeffrey

1998-01-01

Defines ergonomics and discusses design and environmental considerations. Suggests work-space requirements for: tables, chairs, monitor height, ambient noise and light, electricity, and environmental hazards. Includes sources for additional information related to ergonomic design. (AEF)

Ergonomic design in ancient Greece.

PubMed

Marmaras, N; Poulakakis, G; Papakostopoulos, V

1999-08-01

Although the science of ergonomics did not actually emerge until the 20th century, there is evidence to suggest that ergonomic principles were in fact known and adhered to 25 centuries ago. The study reported here is a first attempt to research the ergonomics concerns of ancient Greeks, on both a conceptual and a practical level. On the former we present a collection of literature references to the concepts of usability and human-centred design. On the latter, examples of ergonomic design from a variety of fields are analysed. The fields explored here include the design of everyday utensils, the sculpture and manipulation of marble as a building material and the design of theatres. Though hardly exhaustive, these examples serve to demonstrate that the ergonomics principles, in content if not in name, actually emerged a lot earlier than is traditionally thought.

Redesigning the work system of rubber industries based on total ergonomics and ergo-micmac integration

NASA Astrophysics Data System (ADS)

Setiawan, H.

2018-01-01

The factory capacity achievement and the bottleneck reduction of production process at wet-blanket workstations are influenced by the balance of life quality rates and worker’s productivity, along with the worker’s ability and limitations, tasks, organization and work environment. The life quality of workers is indicated by: the reduction of workload, and fatigue. Meanwhile, work productivity is measured by increasing production results per work shift. The optimization of the quality of life and productivity of workers is achieved by redesigning the system and workstations based on ergonomics integrating Total Ergonomics with Ergo-MicMac (Micro Ergonomics and Macro Ergonomics), which includes redesigning wet-blanket folding worktable, regulating the system pattern of working in pairs, giving official break time, giving extra nutritious intakes such as sweet tea and snack Pempek, giving personal protective equipments, and redesigning physical working environments.This study was an experimental study, with treatment by subject design involving 30 workers sampled at a workstation condition before and after Ergonomics based redesign. The findings and conclusions of the study were derived from the reduction of the workload by 16.06%, fatigue by 18.84% and the increase of production results per work shift by 20.29%.

Supporting the design of office layout meeting ergonomics requirements.

PubMed

Margaritis, Spyros; Marmaras, Nicolas

2007-11-01

This paper proposes a method and an information technology tool aiming to support the ergonomics layout design of individual workstations in a given space (building). The proposed method shares common ideas with previous generic methods for office layout. However, it goes a step forward and focuses on the cognitive tasks which have to be carried out by the designer or the design team trying to alleviate them. This is achieved in two ways: (i) by decomposing the layout design problem to six main stages, during which only a limited number of variables and requirements are considered and (ii) by converting the ergonomics requirements to functional design guidelines. The information technology tool (ErgoOffice 0.1) automates certain phases of the layout design process, and supports the design team either by its editing and graphical facilities or by providing adequate memory support.

Ergonomic principles of task alignment, visual display, and direction of execution of laparoscopic bowel suturing.

PubMed

Emam, T A; Hanna, G; Cuschieri, A

2002-02-01

Laparoscopic suturing is technically a demanding skill in laparoscopic surgery. Ergonomic experimental studies provide objective information on the important factors and variables that govern optimal endoscopic suturing. Our objective was to determine the optimum physical alignment, visual display, and direction of intracorporeal laparoscopic bowel suturing using infrared motion analysis and telemetric electromyography (EMG) systems. Ten surgeons participated in the study; each sutured 50-mm porcine small bowel enterotomies toward and away from the surgeon in the vertical and horizontal bowel plane with either isoplanar (image display corresponds with actual lie of the bowel) or nonisoplanar (bowel displayed horizontally but mounted vertically in the trainer and vice versa) display. The end points were the placement error score, execution time, leakage pressure, motion analysis, and telemetric EMG parameters of the surgeon's dominant upper limb. Suturing was demonstrably easier in the vertical than in the horizontal plane, resulting in a better task quality (placement error score, p < 0.0001; leakage pressure, p < 0.005) and shorter execution time (p < 0.05). Nonisoplanar display of the surgical anatomy degrades performance in terms of both task efficiency and task quality. On motion analysis, a wider angle of excursion and lower angular velocity were observed during the vertical suturing with isoplaner display. Compared to horizontal suturing, supination at the wrist was significantly greater during vertical than horizontal suturing (p < 0.05). Within each category (vertical vs horizontal suturing), the direction of suturing (toward/away from the surgeon) did not influence the extent of pronation/ supination at the wrist. In line with the degraded performance, significantly more muscle work was expended during horizontal suturing. This affected the forearm flexors (p < 0.05), arm flexors and extensors (p < 0.005 and p < 0.05, respectively), and deltoid muscles (p

Corporate initiatives in ergonomics--an introduction.

PubMed

Hägg, Göran M

2003-01-01

Examples in the literature of corporate initiatives in ergonomics are reviewed. Different types of programmes are identified with ambitions ranging from time-limited interventions to continuous processes. Common elements are health surveillance, workstation design and choice of tools, product design, quality aspects, participative aspects and education, training and information. The implementation of ergonomics programmes varies substantially depending on the type of company, and company policies and organisation. Some of the most developed ergonomics programmes originate from the automobile industry. Other businesses with many established programmes are the electronics industry, the food industry and the office environment. A participative approach, as well as ergonomics expertise, are crucial ingredients for a successful programme. The scientific evaluation of ergonomics programmes, especially in economical terms, is in too many cases insufficient or missing. Furthermore, links to company core values such as quality improvement are often lacking. Programmes in ergonomics are still often seen as solely a matter of health and safety. Only a few companies have reached the state where ergonomics constitutes an integrated part of the overall strategy of the enterprise.

Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process.

PubMed

Winter, Gabriele; Schaub, Karlheinz G; Großmann, Kay; Laun, Gerhard; Landau, Kurt; Bruder, Ralph

2012-01-01

Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.

PRN 2007-3: The Agricultural Handlers Exposure Task Force, L.L.C

EPA Pesticide Factsheets

This PR Notice discusses the Agricultural Handlers Exposure Task Force, an industry-wide task force formed to develop mixer, loader, and applicator exposure data for pesticides used in agricultural settings. It includes contacts for more information.

A Comprehensive Approach for the Ergonomic Evaluation of 13 Emergency and Transport Ventilators.

PubMed

Marjanovic, Nicolas; L'Her, Erwan

2016-05-01

Mechanical ventilation is an important part of emergency medicine and is frequently used for transportation. Human errors during ventilator settings are frequent and may be associated with high morbidity/mortality. The aim of the study was to provide a complete ergonomic evaluation of emergency and transport ventilators, taking into account objective and subjective human-machine interface assessments and individual mental work load. We performed a prospective bench ergonomic evaluation of 13 emergency and transport ventilators, using standardized conditions and a global methodological approach. The study was performed in an evaluation laboratory dedicated to respiratory care, and 12 emergency physicians unfamiliar with the tested devices were included in the evaluation. The ventilators were classified into 3 categories (simple, sophisticated, and ICU-like). Objective chronometric evaluations were conducted considering 9 tasks, and subjective evaluations were performed (ease of use, willingness to use, and user-friendliness of monitoring) using Likert scales. Mental work load evaluation was performed using the NASA Task Load Index scale. Overall task failure rate represented 4% of all attempts. Setting modifications, ventilation mode changes, and powering down durations were different between simple and other emergency and transport ventilator categories (P < .005). There was no difference between ventilator categories for the ease of use and user-friendliness of the monitoring. In contrast, the willingness to use was lower for simple devices, compared with sophisticated and ICU-like emergency and transport ventilators (2.9 ± 1.4 vs 3.9 ± 1.2, P = .002 and 4.3 ± 1, P < .001). No differences were observed between devices regarding the mental work load, except for several specific devices in the sophisticated category. A comprehensive ergonomic evaluation provides valuable information while investigating operational friendliness in emergency and transport

Computer ergonomics: the medical practice guide to developing good computer habits.

PubMed

Hills, Laura

2011-01-01

Medical practice employees are likely to use computers for at least some of their work. Some sit several hours each day at computer workstations. Therefore, it is important that members of your medical practice team develop good computer work habits and that they know how to align equipment, furniture, and their bodies to prevent strain, stress, and computer-related injuries. This article delves into the field of computer ergonomics-the design of computer workstations and work habits to reduce user fatigue, discomfort, and injury. It describes practical strategies medical practice employees can use to improve their computer work habits. Specifically, this article describes the proper use of the computer workstation chair, the ideal placement of the computer monitor and keyboard, and the best lighting for computer work areas and tasks. Moreover, this article includes computer ergonomic guidelines especially for bifocal and progressive lens wearers and offers 10 tips for proper mousing. Ergonomically correct posture, movements, positioning, and equipment are all described in detail to enable the frequent computer user in your medical practice to remain healthy, pain-free, and productive.

Exploring the Relationship of Task Performance and Physical and Cognitive Fatigue During a Daylong Light Precision Task.

PubMed

Yung, Marcus; Manji, Rahim; Wells, Richard P

2017-11-01

Our aim was to explore the relationship between fatigue and operation system performance during a simulated light precision task over an 8-hr period using a battery of physical (central and peripheral) and cognitive measures. Fatigue may play an important role in the relationship between poor ergonomics and deficits in quality and productivity. However, well-controlled laboratory studies in this area have several limitations, including the lack of work relevance of fatigue exposures and lack of both physical and cognitive measures. There remains a need to understand the relationship between physical and cognitive fatigue and task performance at exposure levels relevant to realistic production or light precision work. Errors and fatigue measures were tracked over the course of a micropipetting task. Fatigue responses from 10 measures and errors in pipetting technique, precision, and targeting were submitted to principal component analysis to descriptively analyze features and patterns. Fatigue responses and error rates contributed to three principal components (PCs), accounting for 50.9% of total variance. Fatigue responses grouped within the three PCs reflected central and peripheral upper extremity fatigue, postural sway, and changes in oculomotor behavior. In an 8-hr light precision task, error rates shared similar patterns to both physical and cognitive fatigue responses, and/or increases in arousal level. The findings provide insight toward the relationship between fatigue and operation system performance (e.g., errors). This study contributes to a body of literature documenting task errors and fatigue, reflecting physical (both central and peripheral) and cognitive processes.

Ergonomics in gynecologists' daily practice: A nationwide survey in The Netherlands.

PubMed

Alleblas, Chantal C J; Formanoy, Margriet A G; Könemann, Reinier; Radder, Celine M; Huirne, Judith A; Nieboer, Theodoor E

2016-01-01

Gynecologists are exposed to multiple risk factors for developing physical complaints. To enhance the workplace ergonomics in gynecological practice, a more detailed insight about job content and associated demands is necessary to subsequently decrease the exposure to risk factors. The aim of this study was to investigate the prevalence of physical complaints and the presence of ergonomic constraints in Dutch gynecological practice. A questionnaire was distributed among the 1200 members of the Dutch Society of Obstetrics and Gynecology. It consisted of 52 Dutch questions derived from the validated Dutch Musculoskeletal Questionnaire. A total of 227 respondents completed the questionnaire (response rate 18.9%). Overall, 99.5% of the respondents rated their health status as reasonable or good. However, the twelve-month prevalence of physical complaints in one or more body part was 89.4%. Sustained adverse body postures were particularly reported for performing abdominal, and endoscopic surgery, and for assisting in vaginal surgery. Limited workspace, instruments, and patient size were reported by more than 60% of the respondents as constraints for adopting a neutral body posture during vaginal, endoscopic and abdominal surgery respectively. The results emphasize the necessity of enhancing ergonomics in gynecological practice. Better ergonomic circumstances will most likely benefit both the health of the gynecologists as well as the quality of surgical care.

Ergonomics and Beyond: Understanding How Chemical and Heat Exposures and Physical Exertions at Work Affect Functional Ability, Injury, and Long-Term Health.

PubMed

Ross, Jennifer A; Shipp, Eva M; Trueblood, Amber B; Bhattacharya, Amit

2016-08-01

To honor Tom Waters's work on emerging occupational health issues, we review the literature on physical along with chemical exposures and their impact on functional outcomes. Many occupations present the opportunity for exposure to multiple hazardous exposures, including both physical and chemical factors. However, little is known about how these different factors affect functional ability and injury. The goal of this review is to examine the relationships between these exposures, impairment of the neuromuscular and musculoskeletal systems, functional outcomes, and health problems with a focus on acute injury. Literature was identified using online databases, including PubMed, Ovid Medline, and Google Scholar. References from included articles were searched for additional relevant articles. This review documented the limited existing literature that discussed cognitive impairment and functional disorders via neurotoxicity for physical exposures (heat and repetitive loading) and chemical exposures (pesticides, volatile organic compounds [VOCs], and heavy metals). This review supports that workers are exposed to physical and chemical exposures that are associated with negative health effects, including functional impairment and injury. Innovation in exposure assessment with respect to quantifying the joint exposure to these different exposures is especially needed for developing risk assessment models and, ultimately, preventive measures. Along with physical exposures, chemical exposures need to be considered, alone and in combination, in assessing functional ability and occupationally related injuries. © 2016, Human Factors and Ergonomics Society.

Green buildings need good ergonomics.

PubMed

Hedge, A; Dorsey, J A

2013-01-01

A retrospective post-occupancy evaluation survey of 44 occupants in two Leadership in Energy and Environmental Design (LEED) Platinum buildings on a US college campus is reported. The Internet survey covered a range of indoor environment and ergonomics issues. Results show that working in these buildings were a generally positive experience for their health, performance and satisfaction. However, in one building there were persistent issues of variability in air temperature, air freshness, air quality and noise that affected the perceived health and performance of the occupants. Although the buildings were energy-efficient and sustainable structures, ergonomics design issues were identified. Implications for the role of ergonomics in green buildings and in the US LEED rating system are discussed. This survey identified a number of ergonomics design issues present in the LEED Platinum energy-efficient and sustainable buildings that were studied. These results highlight the importance of integrating ergonomics design into green buildings as a component in the US LEED rating system.

The Effect of Pain on Task Performance: A Review of the Literature.

DTIC Science & Technology

1992-07-01

Pharmacology. 11 (2), 123-127 (1989) 8. J. D. Benson, Application of manual handling task in the control of low back pain. In Trends in Ergonomics /Human...Factors IV. Proceedings of the Annual International Industrial Ergonomics and Safety Conference. Amsterdam: Elsevier Science Publishers (1987). 9. T...development of a motor performance method for the measurement of pain. Ergonomics . 32 (3), 307-316 (1989) 67. K. Sedlak, Low-back pain perception and

Designing for sustainability: ergonomics--carpe diem.

PubMed

Martin, K; Legg, S; Brown, C

2013-01-01

Sustainability is a global issue that has worldwide attention but the role of ergonomics in designing for sustainability is poorly understood and seldom considered. An analysis of the literature on ergonomics, design and sustainability was conducted via a search of electronic databases: Scopus, Business Source Complete, Google Scholar, Emerald Publishing, Academic Search Premiere, Web of Science, Discover and Ergonomics Abstracts, for the years 1995-2012. A total of 1934 articles fulfilled the search criteria, but content analysis of the abstracts indicated that only 14 refereed articles addressed the main search criteria. Of those seven were in ergonomics journals and seven were in other journals (and were not written by ergonomists). It is concluded that the contribution of ergonomics to sustainability and sustainable design has been limited, even though the goals of sustainability and ergonomics are congruent. Ergonomists have not been at the forefront of research contributing to sustainability - and it is time for them to 'seize the day' - 'carpe diem'. This literature review shows that ergonomics contribution to sustainability is limited but since there is congruence between the disciplines it calls for ergonomists to become more involved and to seize the day - carpe diem.

Comparison of task-based exposure metrics for an epidemiologic study of isocyanate inhalation exposures among autobody shop workers.

PubMed

Woskie, Susan R; Bello, Dhimiter; Gore, Rebecca J; Stowe, Meredith H; Eisen, Ellen A; Liu, Youcheng; Sparer, Judy A; Redlich, Carrie A; Cullen, Mark R

2008-09-01

Because many occupational epidemiologic studies use exposure surrogates rather than quantitative exposure metrics, the UMass Lowell and Yale study of autobody shop workers provided an opportunity to evaluate the relative utility of surrogates and quantitative exposure metrics in an exposure response analysis of cross-week change in respiratory function. A task-based exposure assessment was used to develop several metrics of inhalation exposure to isocyanates. The metrics included the surrogates, job title, counts of spray painting events during the day, counts of spray and bystander exposure events, and a quantitative exposure metric that incorporated exposure determinant models based on task sampling and a personal workplace protection factor for respirator use, combined with a daily task checklist. The result of the quantitative exposure algorithm was an estimate of the daily time-weighted average respirator-corrected total NCO exposure (microg/m(3)). In general, these four metrics were found to be variable in agreement using measures such as weighted kappa and Spearman correlation. A logistic model for 10% drop in FEV(1) from Monday morning to Thursday morning was used to evaluate the utility of each exposure metric. The quantitative exposure metric was the most favorable, producing the best model fit, as well as the greatest strength and magnitude of association. This finding supports the reports of others that reducing exposure misclassification can improve risk estimates that otherwise would be biased toward the null. Although detailed and quantitative exposure assessment can be more time consuming and costly, it can improve exposure-disease evaluations and is more useful for risk assessment purposes. The task-based exposure modeling method successfully produced estimates of daily time-weighted average exposures in the complex and changing autobody shop work environment. The ambient TWA exposures of all of the office workers and technicians and 57% of the

Study on functional relationships between ergonomics indexes of manual performance

NASA Astrophysics Data System (ADS)

Hu, Hui-Min; Ding, Li; Chen, Shou-Ping; Yang, Chun-Xin; Yuan, Xiu-Gan

This paper investigates functional relationships between some of the key ergonomics indexes in manual performance, and attempts to condense the ergonomics appraisal indexes system and thus evaluate hand performance wearing EVA (extravehicular activity) glove, design and improve EVA glove's performance. Four types of ergonomics indexes were studied, i.e., dexterity, tactile sensibility (TS), strength and fatigue. Two test items of insert sticks into a holes-board (ISIHB) and nuts-bolts assembly task (NBAT) were used to measure dexterity, while shape discrimination (SD) was employed for TS, and grip force (GF) for strength and fatigue. The variables measured in this investigation included accomplishing time (AT) of ISIHB and NBAT, correct rate (CR) of SD, maximal grip force (MGF), instant grip force (IGF) and endurance time of grip force (ETGF). Experiments were conducted on 31 undergraduates (eight female and 23 male) with two experiment conditions of bare-hand group and gloved hand group. Results demonstrated that dexterity and TS performance of gloved hand group declined significantly compared with those of bare-hand group (p<0.001). There were not significant differences in strength and fatigue between two conditions (p>0.05). Four effective functional relationships were developed between four pairs of ergonomics indexes in bare-hand group. In gloved hand group, in addition to above-mentioned four pairs of relationships, another formula was found, which was y^=0.02061+0.01233x ( p<0.01, dexterity and TS).

Physical ergonomics in veterinary dentistry.

PubMed

DeForge, Donald H

2002-12-01

Ergonomics is the application of a body of knowledge addressing the interactions between man and the total working environment, such as atmosphere, heat, light and sound, as well as all tools and equipment of the workplace. Work related musculoskeletal injuries, caused by poor posture, have been discussed in human dentistry for several years. Veterinary dentistry, as a relatively new specialty within veterinary medicine, should address the ergonomics of poor posture without further delay to prevent work-related injuries. The generalist, as well as the specialist and their technicians, are subject to various neck and back disorders if proper ergonomic recommendations are not followed. This review article highlights basic ergonomic design principles for illumination and posture in veterinary dentistry.

Exploring physical exposures and identifying high-risk work tasks within the floor layer trade

PubMed Central

McGaha, Jamie; Miller, Kim; Descatha, Alexis; Welch, Laurie; Buchholz, Bryan; Evanoff, Bradley; Dale, Ann Marie

2014-01-01

Introduction Floor layers have high rates of musculoskeletal disorders yet few studies have examined their work exposures. This study used observational methods to describe physical exposures within floor laying tasks. Methods We analyzed 45 videos from 32 floor layers using Multimedia-Video Task Analysis software to determine the time in task, forces, postures, and repetitive hand movements for installation of four common flooring materials. We used the WISHA checklists to define exposure thresholds. Results Most workers (91%) met the caution threshold for one or more exposures. Workers showed high exposures in multiple body parts with variability in exposures across tasks and for different materials. Prolonged exposures were seen for kneeling, poor neck and low back postures, and intermittent but frequent hand grip forces. Conclusions Floor layers experience prolonged awkward postures and high force physical exposures in multiple body parts, which probably contribute to their high rates of musculoskeletal disorders. PMID:24274895

Development of a Job-Task-Exposure Matrix to assess occupational exposure to disinfectants among U.S. nurses

PubMed Central

Quinot, C; Dumas, O; Henneberger, PK; Varraso, R; Wiley, AS; Speizer, FE; Goldberg, M; Zock, JP; Camargo, CA; Le Moual, N

2016-01-01

Objectives Occupational exposure to disinfectants is associated with work-related asthma, especially in healthcare workers. However, little is known about the specific products involved. To evaluate disinfectant exposures, we designed job-exposure (JEM) and job-task-exposure (JTEM) matrices, which are thought to be less prone to differential misclassification bias than self-reported exposure. We then compared the three assessment methods: self-reported exposure, JEM, and JTEM. Methods Disinfectant use was assessed by an occupational questionnaire in 9,073 U.S. female registered nurses without asthma, aged 49–68 years, drawn from the Nurses’ Health Study II. A JEM was created based on self-reported frequency of use (1–3, 4–7 days/week) of 7 disinfectants and sprays in 8 nursing jobs. We then created a JTEM combining jobs and disinfection tasks to further reduce misclassification. Exposure was evaluated in 3 classes (low, medium, high) using product-specific cut-offs (e.g., <30%, 30–49.9%, ≥50%, respectively, for alcohol); the cut-offs were defined from the distribution of self-reported exposure per job/task. Results The most frequently reported disinfectants were alcohol (weekly use: 39%), bleach (22%) and sprays (20%). More nurses were classified as highly exposed by JTEM (alcohol 41%, sprays 41%, bleach 34%) than by JEM (21%, 30%, 26%, respectively). Agreement between JEM and JTEM was fair-to-moderate (kappa: 0.3–0.5) for most disinfectants. JEM and JTEM exposure estimates were heterogeneous in most nursing jobs, except in emergency room and education/administration. Conclusion The JTEM may provide more accurate estimates than the JEM, especially for nursing jobs with heterogeneous tasks. Use of the JTEM is likely to reduce exposure misclassification. PMID:27566782

Mobile work: Ergonomics in a rapidly changing work environment.

PubMed

Honan, Meg

2015-01-01

Places of work have been completely transformed by innovations in mobile work tools and ever-present access to internet data. This article characterizes use patterns and provides preliminary considerations for productive and comfortable use of common mobile devices. Two surveys described trends in mobile work. In the first, ergonomics professionals who oversee programs reported common mobile devices, their users and what data is accessed. The second, an end user survey, explored common activities performed on mobile devices, duration of use and locations where mobile work is common. The survey results provide a baseline data point for the status of mobile work in early 2014. Research indicates that additional risks have been introduced to the neck, thumbs and hands when using mobile devices. Possible trends regarding device use and work locations emerge. Intervention studies provide some direction for the practitioner. Practical strategies are outlined to reduce exposure intensity and duration. Contemporary mobile work presents tremendous change and opportunity for ergonomists and researchers to keep pace with fitting the changing models of work to the person. Continued research is needed on current mobile device use patterns to better understand ergonomic risk exposure in this rapidly changing realm.

OSHA sets final ergonomics rule.

PubMed

Tabone, S

2001-02-01

After years of advocating for an ergonomic regulation through the Occupational Safety and Health Administration (OSHA), at last on November 14, 2000, the final standards were issued. The OSHA Ergonomic Standards are designed to prevent musculoskeletal injury by matching workplace conditions to job demands. This rule will provide long awaited relief to nurses in direct care who have worked for years without benefit, in most cases, of technology that could have prevented ergonomic injury.

A new ergonomically improved lathe.

PubMed

Harten, G A; Derks, P M

1975-09-01

Following frequent complaints of lower back pain by lathe operators, a working group from the Philips Ergonomics Department have produced a model of an ergonomically improved lathe which ensures a healthy posture for the lathe operator at work. The same healthy posture can be adopted whether the operator is sitting or standing. The operator also has a good view of his work. At least two manufacturers have undertaken to develop this ergonomic lathe.

ERGONOMICS ABSTRACTS 48347-48982.

ERIC Educational Resources Information Center

Ministry of Technology, London (England). Warren Spring Lab.

IN THIS COLLECTION OF ERGONOMICS ABSTRACTS AND ANNOTATIONS THE FOLLOWING AREAS OF CONCERN ARE REPRESENTED--GENERAL REFERENCES, METHODS, FACILITIES, AND EQUIPMENT RELATING TO ERGONOMICS, SYSTEMS OF MAN AND MACHINES, VISUAL, AUDITORY, AND OTHER SENSORY INPUTS AND PROCESSES (INCLUDING SPEECH AND INTELLIGIBILITY), INPUT CHANNELS, BODY MEASUREMENTS,…

Safety voice for ergonomics (SAVE) project: protocol for a workplace cluster-randomized controlled trial to reduce musculoskeletal disorders in masonry apprentices.

PubMed

Kincl, Laurel D; Anton, Dan; Hess, Jennifer A; Weeks, Douglas L

2016-04-27

Masons have the highest rate of overexertion injuries among all construction trades and rank second for occupational back injuries in the United States. Identified ergonomic solutions are the primary method of reducing exposure to risk factors associated with musculoskeletal disorders. However, many construction workers lack knowledge about these solutions, as well as basic ergonomic principles. Construction apprentices, as they embark on their careers, are greatly in need of ergonomics training to minimize the cumulative exposure that leads to musculoskeletal disorders. Apprentices receive safety training; however, ergonomics training is often limited or non-existent. In addition, apprenticeship programs often lack "soft skills" training on how to appropriately respond to work environments and practices that are unsafe. The SAVE program - SAfety Voice for Ergonomics - strives to integrate evidence-based health and safety training strategies into masonry apprenticeship skills training to teach ergonomics, problem solving, and speaking up to communicate solutions that reduce musculoskeletal injury risk. The central hypothesis is that the combination of ergonomics training and safety voice promotion will be more effective than no training or either ergonomics training alone or safety voice training alone. Following the development and pilot testing of the SAVE intervention, SAVE will be evaluated in a cluster-randomized controlled trial at 12 masonry training centers across the U.S. Clusters of apprentices within centers will be assigned at random to one of four intervention groups (n = 24 per group): (1) ergonomics training only, (2) safety voice training only, (3) combined ergonomics and safety voice training, or (4) control group with no additional training intervention. Outcomes assessed at baseline, at the conclusion of training, and then at six and 12 months post training will include: musculoskeletal symptoms, general health perceptions, knowledge of

Ergonomics: Injury Protection You Can Afford.

ERIC Educational Resources Information Center

Sturgeon, Julie

1998-01-01

Examines the physical health risks attributed to poor furniture and equipment ergonomics and looks at ways to help assure that furniture and equipment purchases and practices are ergonomically sound. Cautions to be wary wary of marketing hype that a company's furniture is ergonomically set, and acquire adjustable furniture and encourage students…

Achieving LEED credit for ergonomics: Laying the foundation.

PubMed

Lynch, Mallory

2014-01-01

Despite guidance from the United States Green Building Council (USGBC) on the requirements for earning a Leadership in Energy and Environmental Design (LEED) ergonomics credit in the Innovation in Design and Innovation in Operations category, few projects have received the credit. The University of California, Berkeley ergonomics program, Ergonomics@Work, has aligned the ergonomics strategy to those of the USGBC and LEED to achieve the ergonomics credit in several new buildings. This article describes the steps needed to obtain the credit and highlights the opportunities it creates to partner with the project team to promote ergonomics. As a profession it is up to ergonomists to create the road map that incorporates ergonomics into the green building design.

Overview of ergonomics built environment.

PubMed

Costa, Ana Paula Lima; Campos, Fábio; Villarouco, Vilma

2012-01-01

This article provides an overview of academic research in the scientific discipline of ergonomics in the context of the built environment, from data collected from journals, conferences and research groups whose focus is the theme of the Ergonomics of Built Environment. Starting from the context of the Ergonomics of Built Environment, it identifies the broadcast media who publish work in this area and its scientific production, seeking to recover from the first published papers to the production of the most recent scientific journals and conferences to be launched 2010. From this mapping, we identified the major outstanding and open issues in these studies, outlining the state of the art Ergonomics Built Environment, in order to inform those interested and intend to develop scientific research in this field.

PRN 2000-7: Non-Dietary Exposure Task Force

EPA Pesticide Factsheets

This PR Notice announces an industry-wide task force to jointly develop residential indoor exposure data for pesticides containing one or more of the active ingredients synthetic pyrethroids, pyrethrum and synergists.

Guidance strategies for a participatory ergonomic intervention to increase the use of ergonomic measures of workers in construction companies: a study design of a randomised trial.

PubMed

Visser, Steven; van der Molen, Henk F; Sluiter, Judith K; Frings-Dresen, Monique H W

2014-04-17

More than seven out of 10 Dutch construction workers describe their work as physically demanding. Ergonomic measures can be used to reduce these physically demanding work tasks. To increase the use of ergonomic measures, employers and workers have to get used to other working methods and to maintaining them. To facilitate this behavioural change, participatory ergonomics (PE) interventions could be useful. For this study a protocol of a PE intervention is adapted in such a way that the intervention can be performed by an ergonomics consultant through face-to-face contacts or email contacts. The objective of this study is to evaluate the effectiveness of the face-to-face guidance strategy and the e-guidance strategy on the primary outcome measure: use of ergonomic measures by individual construction workers, and on the secondary outcome measures: the work ability, physical functioning and limitations due to physical problems of individual workers. The present study is a randomised intervention trial of six months in 12 companies to establish the effects of a PE intervention guided by four face-to-face contacts (N = 6) or guided by 13 email contacts (N = 6) on the primary and secondary outcome measures at baseline and after six months. Construction companies are randomly assigned to one of the guidance strategies with the help of a computer generated randomisation table. In addition, a process evaluation for both strategies will be performed to determine reach, dose delivered, dose received, precision, competence, satisfaction and behavioural change to find possible barriers and facilitators for both strategies. A cost-benefit analysis will be performed to establish the financial consequences of both strategies. The present study is in accordance with the CONSORT statement. The outcome of this study will help to 1) evaluate the effect of both guidance strategies, and 2) find barriers to and facilitators of both guidance strategies. When these strategies are

The Need to Reevaluate Nonresponding Ergonomic Patients

NASA Technical Reports Server (NTRS)

Scarpa, Philip J.; Field, Steven A.

1999-01-01

The Kennedy Space Center (KSC) Environmental Health (EH) contractor performs ergonomic evaluations under its Ergonomic Program. Any KSC employee may request one or the reviewing physician may request one for a patient during a visit to an onsite medical facility. As part of the ergonomic evaluation, recommendations are given to the patient to help reduce any ergonomic problems they experience. The recommendations, if implemented, are successful in the majority of KSC patients; however, a group of patients do not seem to improve. Those who don't improve may be identified by reevaluations, which are performed to implement maximum resolution of ergonomic problems.

Exposure to audible and infrasonic noise by modern agricultural tractors operators.

PubMed

Bilski, Bartosz

2013-03-01

The wheeled agricultural tractor is one of the most prominent sources of noise in agriculture. This paper presents the assessment of the operator's exposure to audible and infrasonic noise in 32 selected modern wheeled agricultural tractors designed and produced by world-renowned companies in normal working conditions. The tractors have been in use for no longer than 4 years, with rated power of 51 kW to up to 228 kW (as per 97/68 EC). Audible and infrasonic noise level measurements and occupational exposure analysis to noise were performed according to ISO 9612:2009 (strategy 1 - task-based measurements). The measurements were made in different typical work conditions inside and outside of tractors cabs. The results indicated that exposure levels to noise perceived by the operators (L(ex,Te) between 62,3 and 84,7 dB-A) and can make a small risk of potential adversely effects on hearing during tasks performed inside the closed cab. It should be remarked that uncertainty interval is wider and in in some conditions can occur transgression of audible noise occupational exposure limits. The measured audible noise levels can potentially develop the non-auditory effects. Analysed tractors emit considerable infrasonic noise levels that tend to exceed the occupational exposure limits (both inside and outside the driver's cab). The levels of infrasound: 83,8-111,4 dB-G. All tractors introduced for sale should be subjected to tests in terms of infrasonic noise levels. The applicable standards for low frequency noise and its measurement methods for vehicles, including agricultural tractors, should be scientifically revised. In the last years there has been a noticeable technical progress in reduction of audible noise exposure at the tractors operators workplaces with simultaneously lack of important works for limitation of exposure to infrasound. Author discuss possible health and ergonomic consequencies of such exposure. Copyright © 2012 Elsevier Ltd and The Ergonomics

Maintenance of submersible pumps in the septic tanks: ergonomic and biological risks to the worker.

PubMed

Mariño, Suzi; Figueiredo, Alex

2012-01-01

In this study was observed the maintenance task of submersible pumps septic tanks installed in industrial bathrooms. This maintenance activity operators are exposed to various biological and ergonomic risks. This type of activity requires its great physical performers who are also subject to contact with human waste in the form of liquids, gases and solids. Besides the problems mentioned, are still exposed to high temperatures that can cause diseases such as hyperthermia or heatstroke. These aspects were observed using the ergonomic assessment methodology in order to suggest improvements that are reflected in productivity and employee satisfaction.

Ergonomics: A Commonsense Activity That Can Save Schools Money.

ERIC Educational Resources Information Center

Fleer, Paul; Gauthier-Green, Erin

2002-01-01

Describes the use of ergonomics to reduce work-related musculoskeletal disorders such as back pain, tendonitis, and carpal tunnel syndrome. Describes ergonomics and how to identify ergonomic problems, conduct a job hazard analysis, and develop solutions. Also lists common ergonomic errors in schools. Provides an ergonomic checklist for employees…

Benefits of Stimulus Exposure: Developmental Learning Independent of Task Performance

PubMed Central

Green, David B.; Ohlemacher, Jocelyn; Rosen, Merri J.

2016-01-01

Perceptual learning (training-induced performance improvement) can be elicited by task-irrelevant stimulus exposure in humans. In contrast, task-irrelevant stimulus exposure in animals typically disrupts perception in juveniles while causing little to no effect in adults. This may be due to the extent of exposure, which is brief in humans while chronic in animals. Here we assessed the effects of short bouts of passive stimulus exposure on learning during development in gerbils, compared with non-passive stimulus exposure (i.e., during testing). We used prepulse inhibition of the acoustic startle response, a method that can be applied at any age, to measure gap detection thresholds across four age groups, spanning development. First, we showed that both gap detection thresholds and gap detection learning across sessions displayed a long developmental trajectory, improving throughout the juvenile period. Additionally, we demonstrated larger within- and across-animal performance variability in younger animals. These results are generally consistent with results in humans, where there are extended developmental trajectories for both the perception of temporally-varying signals, and the effects of perceptual training, as well as increased variability and poorer performance consistency in children. We then chose an age (mid-juveniles) that displayed clear learning over sessions in order to assess effects of brief passive stimulus exposure on this learning. We compared learning in mid-juveniles exposed to either gap detection testing (gaps paired with startles) or equivalent gap exposure without testing (gaps alone) for three sessions. Learning was equivalent in both these groups and better than both naïve age-matched animals and controls receiving no gap exposure but only startle testing. Thus, short bouts of exposure to gaps independent of task performance is sufficient to induce learning at this age, and is as effective as gap detection testing. PMID:27378837

PRN 94-9: Announcing the Formation of Two Industry-Wide Task Forces: Agricultural Reentry Task Force and Outdoor Residential Exposure Task Force

EPA Pesticide Factsheets

This Notice announces two industry-wide Task Forces being formed in response to generic exposure data requirements. It contains EPA's policy on a registrant's options for, and responsibilities when joining Task Force as a way to satisfy data requirements.

Ergonomics work stations decreases the health impairment and saves electrical energy at the woodworking workshop in Bali, Indonesia.

PubMed

Sudiajeng, Lilik; Adiputra, Nyoman; Leibbrandt, Richard

2012-12-01

This research was conducted to assess the positive effect of the ergonomics work station on the health impairment and electrical energy usage at the woodworking workshop in Bali, Indonesia. Woodworking workshops are dangerous, particularly when they are used improperly. Workers are exposed to health hazards that cause health impairment and inefficiencies in their work conditions. A preliminary study at a woodworking workshop at the Bali State Polytechnic showed that the work station was not suitable to body size of the participants and caused awkward postures. In addition, there was also an inappropriate physical work environment. Both inappropriate work station and physical work environment caused participants to be less active and motivated. This paper reports on an experimental study into the effects of an ergonomic intervention at this workshop. The participants were 2 groups of male students with 10 participants in each group. The first group performed the task with the original work station as a control group, while the second group performed the task with the new work station. The study found a significant difference between groups (p < 0.05) both for the health impairment and the electrical energy usage. The ergonomics intervention on the work station decreased the working heart rate (16.7%), the total score of musculoskeletal disorders (17.3%), and the total score of psychological fatigue (21.5%). Furthermore, it also decreased the electrical energy usage (38.7%). This shows that an ergonomics intervention on work station decreased the health impairment and saved electrical energy usage. It also protected the workers from woodworking hazards and allowed participants to perform their tasks in healthy, safe, convenient and efficient work conditions.

Ergonomics in radiology.

PubMed

Goyal, N; Jain, N; Rachapalli, V

2009-02-01

The use of computers is increasing in every field of medicine, especially radiology. Filmless radiology departments, speech recognition software, electronic request forms and teleradiology are some of the recent developments that have substantially increased the amount of time a radiologist spends in front of a computer monitor. Computers are also needed for searching literature on the internet, communicating via e-mails, and preparing for lectures and presentations. It is well known that regular computer users can suffer musculoskeletal injuries due to repetitive stress. The role of ergonomics in radiology is to ensure that working conditions are optimized in order to avoid injury and fatigue. Adequate workplace ergonomics can go a long way in increasing productivity, efficiency, and job satisfaction. We review the current literature pertaining to the role of ergonomics in modern-day radiology especially with the development of picture archiving and communication systems (PACS) workstations.

The dentist’s operating posture – ergonomic aspects

PubMed Central

Pîrvu, C; Pătraşcu, I; Pîrvu, D; Ionescu, C

2014-01-01

Abstract The practice of dentistry involves laborious high finesse dental preparations, precision and control in executions that require a particular attention, concentration and patience of the dentist and finally the dentist’s physical and mental resistance. The optimal therapeutic approach and the success of practice involve special working conditions for the dentist and his team in an ergonomic environment. The meaning of the posture in ergonomics is the manner in which different parts of the body are located and thus the reports are established between them in order to allow a special task execution. This article discusses the posture adopted by dentists when they work, beginning with the balanced posture and going to different variants of posture. The ideal posture of a dentist gives him, on the one hand the optimal working conditions (access, visibility and control in the mouth) and on the other hand, physical and psychological comfort throughout the execution of the clinical acts. Although the theme of dentist posture is treated with great care and often presented in the undergraduate courses and the continuing education courses on ergonomics in dentistry, many dentists do not know the subject well enough nor the theoretical issues and therefore nor the practical applicability. The risk and perspective of the musculoskeletal disorders related to unbalanced postures should determine the dentists take postural corrective actions and compensation measures in order to limit the negative effects of working in a bad posture. PMID:25184007

Ergonomic material-handling device

DOEpatents

Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

2004-08-24

A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

Determinants of business sustainability: an ergonomics perspective.

PubMed

Genaidy, Ash M; Sequeira, Reynold; Rinder, Magda M; A-Rehim, Amal D

2009-03-01

There is a need to integrate both macro- and micro-ergonomic approaches for the effective implementation of interventions designed to improve the root causes of problems such as work safety, quality and productivity in the enterprise system. The objective of this study was to explore from an ergonomics perspective the concept of business sustainability through optimising the worker-work environment interface. The specific aims were: (a) to assess the working conditions of a production department work process with the goal to jointly optimise work safety, quality and quantity; (b) to evaluate the enterprise-wide work process at the system level as a social entity in an attempt to trace the root causes of ergonomic issues impacting employees throughout the work process. The Work Compatibility Model was deployed to examine the experiences of workers (that is, effort, perceived risk/benefit, performance and satisfaction/dissatisfaction or psychological impact) and their associations with the complex domains of the work environment (task content, physical and non-physical work environment and conditions for learning/growth/development). This was followed by assessment of the enterprise system through detailed interviews with department managers and lead workers. A system diagnostic instrument was also constructed from information derived from the published literature to evaluate the enterprise system performance. The investigation of the production department indicated that the stress and musculoskeletal pain experienced by workers (particularly on the day shift) were derived from sources elsewhere in the work process. The enterprise system evaluation and detailed interviews allowed the research team to chart the feed-forward and feedback stress propagation loops in the work system. System improvement strategies were extracted on the basis of tacit/explicit knowledge obtained from department managers and lead workers. In certain situations concerning workplace human

Design and ergonomics. Methods for integrating ergonomics at hand tool design stage.

PubMed

Marsot, Jacques; Claudon, Laurent

2004-01-01

As a marked increase in the number of musculoskeletal disorders was noted in many industrialized countries and more specifically in companies that require the use of hand tools, the French National Research and Safety Institute (INRS) launched in 1999 a research project on the topic of integrating ergonomics into hand tool design, and more particularly to a design of a boning knife. After a brief recall of the difficulties of integrating ergonomics at the design stage, the present paper shows how 3 design methodological tools--Functional Analysis, Quality Function Deployment and TRIZ--have been applied to the design of a boning knife. Implementation of these tools enabled us to demonstrate the extent to which they are capable of responding to the difficulties of integrating ergonomics into product design.

Ergonomic guidelines for using notebook personal computers. Technical Committee on Human-Computer Interaction, International Ergonomics Association.

PubMed

Saito, S; Piccoli, B; Smith, M J; Sotoyama, M; Sweitzer, G; Villanueva, M B; Yoshitake, R

2000-10-01

In the 1980's, the visual display terminal (VDT) was introduced in workplaces of many countries. Soon thereafter, an upsurge in reported cases of related health problems, such as musculoskeletal disorders and eyestrain, was seen. Recently, the flat panel display or notebook personal computer (PC) became the most remarkable feature in modern workplaces with VDTs and even in homes. A proactive approach must be taken to avert foreseeable ergonomic and occupational health problems from the use of this new technology. Because of its distinct physical and optical characteristics, the ergonomic requirements for notebook PCs in terms of machine layout, workstation design, lighting conditions, among others, should be different from the CRT-based computers. The Japan Ergonomics Society (JES) technical committee came up with a set of guidelines for notebook PC use following exploratory discussions that dwelt on its ergonomic aspects. To keep in stride with this development, the Technical Committee on Human-Computer Interaction under the auspices of the International Ergonomics Association worked towards the international issuance of the guidelines. This paper unveils the result of this collaborative effort.

Silica exposure during construction activities: statistical modeling of task-based measurements from the literature.

PubMed

Sauvé, Jean-François; Beaudry, Charles; Bégin, Denis; Dion, Chantal; Gérin, Michel; Lavoué, Jérôme

2013-05-01

Many construction activities can put workers at risk of breathing silica containing dusts, and there is an important body of literature documenting exposure levels using a task-based strategy. In this study, statistical modeling was used to analyze a data set containing 1466 task-based, personal respirable crystalline silica (RCS) measurements gathered from 46 sources to estimate exposure levels during construction tasks and the effects of determinants of exposure. Monte-Carlo simulation was used to recreate individual exposures from summary parameters, and the statistical modeling involved multimodel inference with Tobit models containing combinations of the following exposure variables: sampling year, sampling duration, construction sector, project type, workspace, ventilation, and controls. Exposure levels by task were predicted based on the median reported duration by activity, the year 1998, absence of source control methods, and an equal distribution of the other determinants of exposure. The model containing all the variables explained 60% of the variability and was identified as the best approximating model. Of the 27 tasks contained in the data set, abrasive blasting, masonry chipping, scabbling concrete, tuck pointing, and tunnel boring had estimated geometric means above 0.1mg m(-3) based on the exposure scenario developed. Water-fed tools and local exhaust ventilation were associated with a reduction of 71 and 69% in exposure levels compared with no controls, respectively. The predictive model developed can be used to estimate RCS concentrations for many construction activities in a wide range of circumstances.

Applying research to practice: generalist and specialist (visual ergonomics) consultancy.

PubMed

Long, Jennifer; Long, Airdrie

2012-01-01

Ergonomics is a holistic discipline encompassing a wide range of special interest groups. The role of an ergonomics consultant is to provide integrated solutions to improve comfort, safety and productivity. In Australia, there are two types of consultants--generalists and specialists. Both have training in ergonomics but specialist knowledge may be the result of previous education or work experience. This paper presents three projects illustrating generalist and specialist (visual ergonomics) consultancy: development of a vision screening protocol, solving visual discomfort in an office environment and solving postural discomfort in heavy industry. These case studies demonstrate how multiple ergonomics consultants may work together to solve ergonomics problems. It also describes some of the challenges for consultants, for those engaging their services and for the ergonomics profession, e.g. recognizing the boundaries of expertise, sharing information with business competitors, the costs-benefits of engaging multiple consultants and the risk of fragmentation of ergonomics knowledge and solutions. Since ergonomics problems are often multifaceted, ergonomics consultants should have a solid grounding in all domains of ergonomics, even if they ultimately only practice in one specialty or domain. This will benefit the profession and ensure that ergonomics remains a holistic discipline.

Ergonomics in the computer workstation.

PubMed

Karoney, M J; Mburu, S K; Ndegwa, D W; Nyaichowa, A G; Odera, E B

2010-09-01

Awareness of effects of long term use of computer and application of ergonomics in the computer workstation is important for preventing musculoskeletal disorders, eyestrain and psychosocial effects. To determine the awareness of physical and psychological effects of prolonged computer usage and application of ergonomicsin the workstation. One hundred and eighty one people were interviewed from tertiary educational institutions, telecommunications and media houses within Nairobi, Kenya. Descriptive cross sectional study. Majority (89.8%) of the respondents felt that prolonged computer use had an adverse effect on their health, with only 12.4% having received formal training on the same. Assessment of their workstations revealed the most applied ergonomic measure as feet placement on the floor: 100% (181) followed by correct monitor placement with 94.4% (171) fulfilling the requirements. The least applied ergonomic measures were non reflecting wall paint: 5% (9) and adjustable desk 9.9% (18). There is awareness among computer users on the effects of prolonged computer use but there is limited application of ergonomic measures.

Guidance strategies for a participatory ergonomic intervention to increase the use of ergonomic measures of workers in construction companies: a study design of a randomised trial

PubMed Central

2014-01-01

Background More than seven out of 10 Dutch construction workers describe their work as physically demanding. Ergonomic measures can be used to reduce these physically demanding work tasks. To increase the use of ergonomic measures, employers and workers have to get used to other working methods and to maintaining them. To facilitate this behavioural change, participatory ergonomics (PE) interventions could be useful. For this study a protocol of a PE intervention is adapted in such a way that the intervention can be performed by an ergonomics consultant through face-to-face contacts or email contacts. The objective of this study is to evaluate the effectiveness of the face-to-face guidance strategy and the e-guidance strategy on the primary outcome measure: use of ergonomic measures by individual construction workers, and on the secondary outcome measures: the work ability, physical functioning and limitations due to physical problems of individual workers. Methods/Design The present study is a randomised intervention trial of six months in 12 companies to establish the effects of a PE intervention guided by four face-to-face contacts (N = 6) or guided by 13 email contacts (N = 6) on the primary and secondary outcome measures at baseline and after six months. Construction companies are randomly assigned to one of the guidance strategies with the help of a computer generated randomisation table. In addition, a process evaluation for both strategies will be performed to determine reach, dose delivered, dose received, precision, competence, satisfaction and behavioural change to find possible barriers and facilitators for both strategies. A cost-benefit analysis will be performed to establish the financial consequences of both strategies. The present study is in accordance with the CONSORT statement. Discussion The outcome of this study will help to 1) evaluate the effect of both guidance strategies, and 2) find barriers to and facilitators of both guidance

Within and between Individual Variability of Exposure to Work-Related Musculoskeletal Disorder Risk Factors.

PubMed

Zare, Mohsen; Sagot, Jean-Claude; Roquelaure, Yves

2018-05-17

Industrial companies indicate a tendency to eliminate variations in operator strategies, particularly following implementation of the lean principle. Companies believe when the operators perform the same prescribed tasks, they have to execute them in the same manner (completing the same gestures and being exposed to the same risk factors). They attempt to achieve better product quality by standardizing and reducing operational leeway. However, operators adjust and modify ways of performing tasks to balance between their abilities and the requirements of the job. This study aims to investigate the variability of exposure to physical risk factors within and between operators when executing the same prescribed tasks. The Ergonomic Standard method was used to evaluate two workstations. Seven operators were observed thirty times between repeated cycle times at those workstations. The results revealed the variability of exposure to risk factors between and within operators in the repeated execution of the same tasks. Individual characteristics and operators' strategies might generate the variability of exposure to risk factors that may be an opportunity to reduce the risks of work-related musculoskeletal disorders (WR-MSDs). However, sometimes operators' strategies may cause overexposure to risk factors; operators most often adopt such strategies to undertake their tasks while reducing the workload.

[Vision of the future of ergonomics in dentistry].

PubMed

Hokwerda, O

2008-08-01

With respect to ergonomics in dentistry, more people are becoming aware of occupational hazards and paying more attention to the prevention of hazards. Dutch law on health and safety at work requires dentists to protect the health and safety of their employees and educational institutions to protect the health and safety of their students. In the meantime a summary has appeared of the ergonomic standards required for the working methods of dentists and for the development of future equipment. Further development of dental ergonomics must take place on the basis of a coherent vision of the future. In this regard it must be clear exactly what ergonomics is and what developments have already taken place. Aspects of particular interest are the prevention of occupational diseases, legal responsibility for protecting the health and safety of employees and students, education in dental ergonomics for dental and oral hygiene students, the academic development and research of dental ergonomics, using organizational models in daily dental practice, and the development of ergonomics at the European level.

Carpal tunnel syndrome among laboratory technicians in relation to personal and ergonomic factors at work.

PubMed

El-Helaly, Mohamed; Balkhy, Hanan H; Vallenius, Laura

2017-11-25

Work-related carpal tunnel syndrome (CTS) has been reported in different occupations, including laboratory technicians, so this study was carried out to determine the prevalence and the associated personal and ergonomic factors for CTS among laboratory technicians. A cross-sectional study was conducted among 279 laboratory technicians at King Fahd Hospital, Saudi Arabia, who filled in a self-administered questionnaire, including questions regarding their demographic criteria, occupational history, job tasks, workplace tools, ergonomic factors at work, and symptoms suggestive of CTS. Physical examinations and electrodiagnostic studies were carried out for those who had symptoms suggestive of CTS to confirm the diagnosis. Univariate and multivariate analysis were performed for both personal and physical factors in association with confirmed CTS among laboratory technicians. The prevalence of CTS among the laboratory technicians was 9.7% (27/279). The following were the statistically significant risk factors for CTS among them: gender (all cases of CTS were female, P=0.00), arm/hand exertion (OR: 7.96; 95% CI: 1.84-34.33), pipetting (OR: 7.27; 95% CI: 3.15-16.78), repetitive tasks (OR: 4.60; 95% CI: 1.39-15.70), using unadjustable chairs or desks (OR: 3.35; 95% CI: 1.23-9.15), and working with a biosafety cabinet (OR: 2.49; 95% CI: 1.11-5.59). CTS cases had significant longer work duration (17.9 ± 5.6 years) than CTS non-case (11.5 ± 7.4 yeas) with low OR (1.108). This study demonstrates some personal and ergonomic factors associated with CTS among the laboratory technicians, including female gender, arm/hand exertion, pipetting, repetitive tasks, working with a biosafety cabinet, and an unadjusted workstation.

[Ergonomic movement in dentistry].

PubMed

Bos-Huizer, J J A; Bolderman, F W

2014-02-01

'Ergonomic movement in dentistry' is a recently developed ergonomic programme for dental healthcare professionals which is intended to prevent work-related complaints and assist in recovering from them. The programme is recommended by disability insurers in cases of specific physical complaints, limitations or disability, as a consequence of which a dental healthcare professional is unable to carry out his or her work. In a four-day training programme, in one's own workplace, skills are taught in the areas of work organization, work attitude and movement. These skills are directly applied in the treatment ofpatients and, if necessary, further improved. In this way, one advances step by step to an ergonomic way of working. Evaluations have shown that the programme is advantageous for the attitude toward work, the workplace and the work organization as well as the reduction of disability.

Postural Assessment of Students Evaluating the Need of Ergonomic Seat and Magnification in Dentistry.

PubMed

Dable, Rajani A; Wasnik, Pradnya B; Yeshwante, Babita J; Musani, Smita I; Patil, Ashishkumar K; Nagmode, Sunilkumar N

2014-12-01

Dental students using conventional chairs need immediate change in their posture. Implementing an ergonomic posture is necessary as they are at high risk for developing musculoskeletal disorders. This study recommends the use of an ergonomic seat and magnification system to enhance the visibility and the posture of an operator. The aim of this study is to make a foray into the hazards caused by inappropriate posture of dental students while working. It also aims at creating a cognizance about the related health implications among the dental fraternity at large, and to understand the significance of adopting an ergonomic posture since the beginning of the professional course. In the present study, postures have been assessed by using rapid upper limb assessment (RULA). This method uses diagrams of body postures and three scoring tables to evaluate ones exposure to risk factors. Ninety students from II BDS (preclinical students in the second year of dental school) were assessed in three groups using three different seats with and without magnification system. The results recorded significantly higher RULA scores for the conventional seats without using the magnification system compared to the SSC (Salli Saddle Chair-an ergonomic seat) with the use of magnification system. A poor ergonomic posture can make the dental students get habituated to the wrong working style which might lead to MSDs (Musculoskeletal diseases). It is advisable to acclimatize to good habits at the inception of the course, to prevent MSDs later in life.

Comparison of ergonomic risk assessment outputs from rapid entire body assessment and quick exposure check in an engine oil company.

PubMed

Motamedzade, Majid; Ashuri, Mohammad Reza; Golmohammadi, Rostam; Mahjub, Hossein

2011-06-13

During the last decades, to assess the risk factors of work-related musculoskeletal disorders (WMSDs), enormous observational methods have been developed. Rapid Entire Body Assessment (REBA) and Quick Exposure Check (QEC) are two general methods in this field. This study aimed to compare ergonomic risk assessment outputs from QEC and REBA in terms of agreement in distribution of postural loading scores based on analysis of working postures. This cross-sectional study was conducted in an engine oil company in which 40 jobs were studied. All jobs were observed by a trained occupational health practitioner. Job information was collected to ensure the completion of ergonomic risk assessment tools, including QEC, and REBA. The result revealed that there was a significant correlation between final scores (r=0.731) and the action levels (r =0.893) of two applied methods. Comparison between the action levels and final scores of two methods showed that there was no significant difference among working departments. Most of studied postures acquired low and moderate risk level in QEC assessment (low risk=20%, moderate risk=50% and High risk=30%) and in REBA assessment (low risk=15%, moderate risk=60% and high risk=25%). There is a significant correlation between two methods. They have a strong correlation in identifying risky jobs, and determining the potential risk for incidence of WMSDs. Therefore, there is possibility for researchers to apply interchangeably both methods, for postural risk assessment in appropriate working environments.

Translating concepts of complexity to the field of ergonomics.

PubMed

Walker, Guy H; Stanton, Neville A; Salmon, Paul M; Jenkins, Daniel P; Rafferty, Laura

2010-10-01

Since 1958 more than 80 journal papers from the mainstream ergonomics literature have used either the words 'complex' or 'complexity' in their titles. Of those, more than 90% have been published in only the past 20 years. This observation communicates something interesting about the way in which contemporary ergonomics problems are being understood. The study of complexity itself derives from non-linear mathematics but many of its core concepts have found analogies in numerous non-mathematical domains. Set against this cross-disciplinary background, the current paper aims to provide a similar initial mapping to the field of ergonomics. In it, the ergonomics problem space, complexity metrics and powerful concepts such as emergence raise complexity to the status of an important contingency factor in achieving a match between ergonomics problems and ergonomics methods. The concept of relative predictive efficiency is used to illustrate how this match could be achieved in practice. What is clear overall is that a major source of, and solution to, complexity are the humans in systems. Understanding complexity on its own terms offers the potential to leverage disproportionate effects from ergonomics interventions and to tighten up the often loose usage of the term in the titles of ergonomics papers. STATEMENT OF RELEVANCE: This paper reviews and discusses concepts from the study of complexity and maps them to ergonomics problems and methods. It concludes that humans are a major source of and solution to complexity in systems and that complexity is a powerful contingency factor, which should be considered to ensure that ergonomics approaches match the true nature of ergonomics problems.

Office workers and video display terminals: physical, psychological and ergonomic factors.

PubMed

Travers, Patricia Hyland; Stanton, Babette-Ann

2002-11-01

The purpose of the pilot study was to examine the psychological and physical symptoms reported by video display terminal (VDT) and non-VDT users in relation to intensity and duration of VDT exposure, ergonomic characteristics of the work station, workers' perceptions of the working environments, medical conditions, job satisfaction, and mood states. Thirty VDT users and 16 non VDT users were selected from four departments of a major radiopharmaceutical company for participation in the cross-sectional study. Self-administered questionnaires were utilized to obtain information on symptoms, medical conditions, job satisfaction, mood states, and the working environments. Objective measurements were obtained to provide information on the various ergonomic components of the work station. The study corroborated findings reported in previous studies, whereby eye related symptoms were associated with VDT usage. A higher percentage of symptoms were reported among VDT users even when they had more control over their work stations. These workers expressed higher levels of job satisfaction, and lower levels of tension, fatigue, confusion, anger, and depression than non-VDT users. Most importantly, a trend in symptomatology was identified, whereby symptoms appeared to increase as duration of VDT exposure increased.

Does a robotic surgery approach offer optimal ergonomics to gynecologic surgeons?: a comprehensive ergonomics survey study in gynecologic robotic surgery

PubMed Central

2017-01-01

Objective To better understand the ergonomics associated with robotic surgery including physical discomfort and symptoms, factors influencing symptom reporting, and robotic surgery systems components recommended to be improved. Methods The anonymous survey included 20 questions regarding demographics, systems, ergonomics, and physical symptoms and was completed by experienced robotic surgeons online through American Association of Gynecologic Laparoscopists (AAGL) and Society of Robotic Surgery (SRS). Results There were 289 (260 gynecology, 22 gynecology-oncology, and 7 urogynecology) gynecologic surgeon respondents regularly practicing robotic surgery. Statistical data analysis was performed using the t-test, χ2 test, and logistic regression. One hundred fifty-six surgeons (54.0%) reported experiencing physical symptoms or discomfort. Participants with higher robotic case volume reported significantly lower physical symptom report rates (p<0.05). Gynecologists who felt highly confident about managing ergonomic settings not only acknowledged that the adjustments were helpful for better ergonomics but also reported a lower physical symptom rate (p<0.05). In minimizing their symptoms, surgeons changed ergonomic settings (32.7%), took a break (33.3%) or simply ignored the problem (34%). Fingers and neck were the most common body parts with symptoms. Eye symptom complaints were significantly decreased with the Si robot (p<0.05). The most common robotic system components to be improved for better ergonomics were microphone/speaker, pedal design, and finger clutch. Conclusion More than half of participants reported physical symptoms which were found to be primarily associated with confidence in managing ergonomic settings and familiarity with the system depending on the volume of robotic cases. Optimal guidelines and education on managing ergonomic settings should be implemented to maximize the ergonomic benefits of robotic surgery. PMID:28657231

Ergonomic Redesign of an Industrial Control Panel.

PubMed

Raeisi, S; Osqueizadeh, R; Maghsoudipour, M; Jafarpisheh, A S

2016-07-01

Operator's role in industrial control centers takes place in time, which is one of the most important determinants of whether an expected action is going to be successful or not. In certain situations, due to the complex nature of the work, the existing interfaces and already prepared procedures do not meet the dynamic requirements of operator's cognitive demands, making the control tasks unnecessarily difficult. This study was conducted to identify ergonomic issues with a specific industrial control panel, and redesign its layout and elements to enhance its usability. Task and link analysis methodologies were implemented. All essential functions and supporting operations were identified at the required trivial levels. Next, the weight of any possible link between the elements of the panel was computed as a composite index of frequency and importance. Finally, all components were rearranged within a new layout, and a computerized mockup was generated. A total of 8 primary tasks was identified, including 4 system failure handling tasks, switching between manual and automated modes, and 3 types of routine vigilance and control tasks. These tasks were broken down into 28 functions and 145 supporting operations, accordingly. Higher link values were observed between hand rest position and 2 elements. Also, 6 other components showed robust linkages. In conclusion, computer modeling can reduce the likelihood of accidents and near misses in industrial control rooms by considering the operators' misperception or mental burden and correcting poor design of the panels and inappropriate task allocation.

Developing hands-on ergonomics lessons for youth

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C; Alexandre, M; Jacobs, K

2006-02-22

By the time students are ready to enter the workforce they have been exposed to up to 20 years of ergonomics risk factors. As technology evolves, it provides more opportunities for intensive repetitive motion and with computers, cell phones, personal digital assistants (PDAs), and electronic games. The average student engages in fewer active physical activities, sit stationary in mismatched furniture in schools for hours and carry heavy backpacks. While long-term effects remain to be identified, increasingly ergonomists and others concerned with musculoskeletal health and wellness, see a need for early ergonomics education. This interactive session provides a hands-on approach tomore » introducing ergonomics to students. Although different approaches may effectively introduce ergonomics at even early stages of development, this program was designed for youth at the middle to high school age. Attendees will participate in four activities designed to introduce ergonomics at an experiential level. The modules focus on grip strength, effective breathing, optimizing your chair, and backpack safety. The workshop will include presentation and worksheets designed for use by teachers with minimal ergonomics training. Feedback from the participants will be sought for further refining the usability and safety of the training package.« less

Whole-body vibration and ergonomic study of US railroad locomotives

NASA Astrophysics Data System (ADS)

Johanning, Eckardt; Landsbergis, Paul; Fischer, Siegfried; Christ, Eberhard; Göres, Benno; Luhrman, Raymond

2006-12-01

US locomotive operators have exposure to multi-axis whole-body vibration (WBV) and shocks while seated. This study assessed operator-related and ergonomic seating design factors that may have confounding or mitigating influence on WBV exposure and its effects. Vibration exposure was measured according to international guidelines (ISO 2631-1; 1997); ergonomic work place factors and vibration effects were studied with a cross-sectional survey instrument distributed to a randomly selected group of railroad engineers ( n=2546) and a control group; and during vehicle inspections. The survey response rate was 47% for the RR engineers ( n=1195) and 41% for the controls ( n=323). Results of the mean basic vibration measurements were for the x, y, z-direction and vector sum 0.14, 0.22, 0.28 and 0.49 m/s 2 respectively; almost all crest factors (CF), MTVV and VDV values were above the critical ratios given in ISO 2631-1. The prevalence of serious neck and lower back disorders among locomotive engineers was found to be nearly double that of the sedentary control group without such exposure. Railroad engineers rated their seats mostly unacceptable regarding different adjustment and comfort aspects (3.02-3.51; scale 1=excellent to 4=unacceptable), while the control group rated their chairs more favorably (1.96-3.44). Existing cab and seat design in locomotives can result in prolonged forced awkward spinal posture of the operator combined with WBV exposure. In a logistic regression analysis, time at work being bothered by vibration (h/day) was significantly associated with an increased risk of low back pain, shoulder and neck pain, and sciatic pain among railroad engineers. Customized vibration attenuation seats and improved cab design of the locomotive controls should be further investigated.

Hexavalent chromium exposure and control in welding tasks.

PubMed

Meeker, John D; Susi, Pam; Flynn, Michael R

2010-11-01

Studies of exposure to the lung carcinogen hexavalent chromium (CrVI) from welding tasks are limited, especially within the construction industry where overexposure may be common. In addition, despite the OSHA requirement that the use of engineering controls such as local exhaust ventilation (LEV) first be considered before relying on other strategies to reduce worker exposure to CrVI, data on the effectiveness of LEV to reduce CrVI exposures from welding are lacking. The goal of the present study was to characterize breathing zone air concentrations of CrVI during welding tasks and primary contributing factors in four datasets: (1) OSHA compliance data; (2) a publicly available database from The Welding Institute (TWI); (3) field survey data of construction welders collected by the Center for Construction Research and Training (CPWR); and (4) controlled welding trials conducted by CPWR to assess the effectiveness of a portable LEV unit to reduce CrVI exposure. In the OSHA (n = 181) and TWI (n = 124) datasets, which included very few samples from the construction industry, the OSHA permissible exposure level (PEL) for CrVI (5 μg/m(3)) was exceeded in 9% and 13% of samples, respectively. CrVI concentrations measured in the CPWR field surveys (n = 43) were considerably higher, and 25% of samples exceeded the PEL. In the TWI and CPWR datasets, base metal, welding process, and LEV use were important predictors of CrVI concentrations. Only weak-to-moderate correlations were found between total particulate matter and CrVI, suggesting that total particulate matter concentrations are not a good surrogate for CrVI exposure in retrospective studies. Finally, in the controlled welding trials, LEV reduced median CrVI concentrations by 68% (p = 0.02). In conclusion, overexposure to CrVI in stainless steel welding is likely widespread, especially in certain operations such as shielded metal arc welding, which is commonly used in construction. However, exposure could be

Does a robotic surgery approach offer optimal ergonomics to gynecologic surgeons?: a comprehensive ergonomics survey study in gynecologic robotic surgery.

PubMed

Lee, Mija Ruth; Lee, Gyusung Isaiah

2017-09-01

To better understand the ergonomics associated with robotic surgery including physical discomfort and symptoms, factors influencing symptom reporting, and robotic surgery systems components recommended to be improved. The anonymous survey included 20 questions regarding demographics, systems, ergonomics, and physical symptoms and was completed by experienced robotic surgeons online through American Association of Gynecologic Laparoscopists (AAGL) and Society of Robotic Surgery (SRS). There were 289 (260 gynecology, 22 gynecology-oncology, and 7 urogynecology) gynecologic surgeon respondents regularly practicing robotic surgery. Statistical data analysis was performed using the t-test, χ² test, and logistic regression. One hundred fifty-six surgeons (54.0%) reported experiencing physical symptoms or discomfort. Participants with higher robotic case volume reported significantly lower physical symptom report rates (p<0.05). Gynecologists who felt highly confident about managing ergonomic settings not only acknowledged that the adjustments were helpful for better ergonomics but also reported a lower physical symptom rate (p<0.05). In minimizing their symptoms, surgeons changed ergonomic settings (32.7%), took a break (33.3%) or simply ignored the problem (34%). Fingers and neck were the most common body parts with symptoms. Eye symptom complaints were significantly decreased with the Si robot (p<0.05). The most common robotic system components to be improved for better ergonomics were microphone/speaker, pedal design, and finger clutch. More than half of participants reported physical symptoms which were found to be primarily associated with confidence in managing ergonomic settings and familiarity with the system depending on the volume of robotic cases. Optimal guidelines and education on managing ergonomic settings should be implemented to maximize the ergonomic benefits of robotic surgery. Copyright © 2017. Asian Society of Gynecologic Oncology, Korean Society

Indonesia ergonomics roadmap: where we are going?

PubMed

Wignjosoebroto, Sritomo

2007-12-01

There are so many definitions for ergonomics terms such as human factors, human factors engineering, human engineering, human factors psychology, engineering psychology, applied ergonomics, occupational ergonomics, industrial ergonomics and industrial engineering. The most inclusive terms are ergonomics and human factors. Both represent the study of work and the interaction between people and their work environmental systems. The main objective is especially fitting with the need to design, develop, implement and evaluate human-machine and environment systems that are productive, comfortable, safe and satisfying to use. The work of the ergonomists in Indonesia--most of them are academicians--have one thing in common, i.e. with the appropriate type of ergonomic approaches to interventions; there would be improvements in productivity, quality of working conditions, occupational safety and health (OSH), costs reduction, better environment, and increase in profits. So many researches, training, seminars and socialization about ergonomics and OSH have been done concerning micro-to-macro themes; but it seems that we are practically still running at the same place up to now. In facts, workers are still working using their traditional or obsolete methods in poor working conditions. Accidents are still happening inside and outside industry with the main root-cause being human "unsafe behavior" and errors. Industrial products cannot compete in the global market, and so many manufacturing industries collapsed or relocated to foreign countries. This paper discusses such a roadmap and review what we ergonomists in Indonesia have done and where we are going to? This review will be treated in the field of ergonomics and OSH to take care the future Indonesia challenges. Some of the challenges faced are care for the workers, care for the people, care for the quality and productivity of work, care for the new advanced technologies, care for the environment, and last but not least

Ergonomics and sustainable development in the past two decades (1992-2011): Research trends and how ergonomics can contribute to sustainable development.

PubMed

Radjiyev, Ayubkhon; Qiu, Hai; Xiong, Shuping; Nam, KyungHyun

2015-01-01

The need for sustainable development has been widely recognized and sustainable development has become a hot topic of various disciplines even though the role of ergonomics in it is seldom reported or considered. This study conducts a systematic survey of research publications in the fields of ergonomics and sustainable development over the past two decades (1992-2011), in order to identify their research trends and convergent areas where ergonomics can play an important role in sustainable development. The results show that 'methods and techniques', 'human characteristics', 'work design and organization', 'health and safety' and 'workplace and equipment design' are the top five frequently researched areas in ergonomics. Ergonomics has an opportunity to contribute its knowledge especially to 'industrial and product design', 'architecture', 'health and safety' and 'HCI' (especially for energy reduction issues) categories of sustainable development. Typical methodologies and general guidance on how to contribute the expertise of ergonomist to sustainable development are also discussed. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The charge of ergonomics--a model according to the influence of ergonomic workplace design for economical and efficient indicators of the automotive industry.

PubMed

Neubert, Nicole; Bruder, Ralph; Toledo, Begoña

2012-01-01

The importance of ergonomic workplace design has been rising incredibly. The knowledge of the interaction with a view to many indicators (e.g. operators' health, quality, productivity etc.) in the automotive assembly shop pushed into another thinking of ergonomics and an increasing awareness of economic possibilities relating to benefits and cost savings aligned with ergonomics. The paper discusses exemplary the various indicators and factors which could be influenced by ergonomic workplace design. These factors are linked each other and support the statement of ergonomic efficiency. Thus, the aim of this paper is to present a model which describes that investments in ergonomic work placement acts with preventive measurements, minimization of losses (refinishing operations, compensation money etc.) and extensive economies on the whole company.

Ergonomic evaluation of ten single-channel pipettes.

PubMed

Lichty, Monica G; Janowitz, Ira L; Rempel, David M

2011-01-01

Repetitive pipetting is a task that is associated with work-related musculoskeletal disorders of the hand and arm. The purpose of this study was to evaluate the usability and ergonomic performance of commercially available pipettes as determined by user ratings and objective measurements. Participants were laboratory technicians and scientists at the Lawrence Berkeley National Laboratory with experience performing pipetting tasks. Twenty-one experienced pipette users completed a standardized pipetting task with 5 manual and 5 electronic pipettes. After using each pipette, the user rated it for attributes of comfort and usability. Although no single pipette was rated significantly better than all of the others for every attribute tested, some significant differences were found between pipettes. The Rainin Pipet-Lite received the highest overall quality score among manual pipettes, while the Thermo Scientific Finnpipette Novus was the top-ranked electronic pipette. Features correlated with greater hand and arm comfort were lower tip ejection force, lower blowout force, and pipette balance in the hand. The findings, when considered with participant comments, provide insights into desirable pipette features and emphasize the value of user testing and the importance of the interactions between task, workplace layout, and pipette design. © 2011 - IOS Press and the authors. All rights reserved

Ergonomic design for dental offices.

PubMed

Ahearn, David J; Sanders, Martha J; Turcotte, Claudia

2010-01-01

The increasing complexity of the dental office environment influences productivity and workflow for dental clinicians. Advances in technology, and with it the range of products needed to provide services, have led to sprawl in operatory setups and the potential for awkward postures for dental clinicians during the delivery of oral health services. Although ergonomics often addresses the prevention of musculoskeletal disorders for specific populations of workers, concepts of workflow and productivity are integral to improved practice in work environments. This article provides suggestions for improving workflow and productivity for dental clinicians. The article applies ergonomic principles to dental practice issues such as equipment and supply management, office design, and workflow management. Implications for improved ergonomic processes and future research are explored.

The need for ergonomics considerations for the design and development of agricultural machinery in Thailand.

PubMed

Mamansari, D U; Salokhe, V M

1995-06-01

Agriculture plays an important role in developing countries which are mainly located in tropical regions. Agriculture is an industry with tremendous opportunities for the application of ergonomics principles. Working conditions are extremely difficult due to severe environmental conditions, long working hours, strenuous work and the use of mobile equipment. The ignorance of the majority of ergonomics principles in the design of agricultural equipment make the conditions more difficult. Thailand is one of the important suppliers of agricultural products in the world. Mechanization has expanded tremendously during the last 10 years and the number of agricultural machinery has rapidly increased. This paper looks at ergonomics principles which must be considered in the design and development of agricultural machines and equipment used in Thailand. It was identified that the common farming system in Thailand is rice-based cultivation, mostly in swampy conditions with heavy clay soil. It was also found that the most energy-consuming task in agriculture was primary cultivation. The most widely used machine is a power tiller which is suitable for the farm sizes available and can be operated easily. Most of the power tillers and other equipment were found to be locally made, with less than 5% imported. Unfortunately, there was no standardization in power tiller manufacturing which led to increasing farmers' strain. There is still a need to collect more ergonomics data of Thai farmers such as anthropometry, strength and physical work capacity for the design and development of agricultural machines and equipment used in Thailand. Different ergonomic consideration for the design and development of agricultural machinery have been suggested.

Helicopter door and window jettison mechanisms for underwater escape: ergonomic confusion!

PubMed

Brooks, C J; Bohemier, A P

1997-09-01

There are 23 different door, hatch, and window release mechanisms identified in 35 types of helicopters that earn their living over water. There is no standardization of the mechanism within each cockpit or among helicopter types, nor is there any standardization of the location relative to the operation; whether the mechanism matches the task or in which direction the door/hatch/window is jettisoned. New regulations are needed by military and civilian authorities to address the ergonomic confusion.

Carpal tunnel syndrome among laboratory technicians in relation to personal and ergonomic factors at work

PubMed Central

El-Helaly, Mohamed; Balkhy, Hanan H.; Vallenius, Laura

2017-01-01

Objectives: Work-related carpal tunnel syndrome (CTS) has been reported in different occupations, including laboratory technicians, so this study was carried out to determine the prevalence and the associated personal and ergonomic factors for CTS among laboratory technicians. Methods: A cross-sectional study was conducted among 279 laboratory technicians at King Fahd Hospital, Saudi Arabia, who filled in a self-administered questionnaire, including questions regarding their demographic criteria, occupational history, job tasks, workplace tools, ergonomic factors at work, and symptoms suggestive of CTS. Physical examinations and electrodiagnostic studies were carried out for those who had symptoms suggestive of CTS to confirm the diagnosis. Univariate and multivariate analysis were performed for both personal and physical factors in association with confirmed CTS among laboratory technicians. Results: The prevalence of CTS among the laboratory technicians was 9.7% (27/279). The following were the statistically significant risk factors for CTS among them: gender (all cases of CTS were female, P=0.00), arm/hand exertion (OR: 7.96; 95% CI: 1.84-34.33), pipetting (OR: 7.27; 95% CI: 3.15-16.78), repetitive tasks (OR: 4.60; 95% CI: 1.39-15.70), using unadjustable chairs or desks (OR: 3.35; 95% CI: 1.23-9.15), and working with a biosafety cabinet (OR: 2.49; 95% CI: 1.11-5.59). CTS cases had significant longer work duration (17.9 ± 5.6 years) than CTS non-case (11.5 ± 7.4 yeas) with low OR (1.108). Conclusion: This study demonstrates some personal and ergonomic factors associated with CTS among the laboratory technicians, including female gender, arm/hand exertion, pipetting, repetitive tasks, working with a biosafety cabinet, and an unadjusted workstation. PMID:28855446

Introducing Ergonomics in Two US Elementary Schools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C L; Tien, D

2003-06-25

The increasing presence of computers and other forms of information and communications technology (ICT) in schools has raised concerns in the United States (US) and elsewhere. Children are using computers more than any other age group in the US. It is not known whether early intensive use of ICT predisposes children to future injury. Ergonomics is not included in state curriculum standards or requirements but can be supported by some of the existing standards. Some who believe that children are better off being educated early about ergonomics are taking action to bring ergonomics into elementary and secondary schools. This papermore » describes the process used to introduce ergonomics into two elementary schools in two different states by initiators with two different roles.« less

Hands-on lessons in ergonomics for youth

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C; Alexandre, M; Jacobs, K

Ergonomics risk factors apply to everybody. Numerous adults have experienced disabling injuries related to use of computers and other forms of technology. Now children are using technology even more than adults. Increasingly ergonomics risk factors are being recognized as present in the world of children. Outreach to schools and the surrounding community by employers may help protect the future work force. A growing body of researchers believe that children can benefit from the early introduction of ergonomics awareness and preventative measures. While individual representatives of the educational system may embrace the concept of introducing ergonomics into the classroom, a numbermore » of barriers can prevent implementation of integrated programs. Some of the barriers to introducing ergonomics in schools have been absence of a tie to educational standards, the existing demands on teaching hours, and the absence of easily executable lesson plans. Ergonomics is rarely included in teacher training and professional ergonomics expertise is needed for the development of a class-based program. As part of Strategic Vision plan for 2025, a National Laboratory identified community outreach and the future workforces as key areas for initiatives. A series of hands-on interactive modules have been developed by professional ergonomics specialists. They are being tested with elementary, middle and high school students. Where possible, the content has been tied to the educational standards in the State of California in the USA. Currently the modules include grip strength, effective breathing, optimal keyboard and mouse positions, optimizing chairs, posture and movement, backpack safety and safe lifting. Each module takes the students through a related activity or experience. An individual worksheet asks them questions about the experience and guides them to consider implications in their activities of daily living. A module on hearing is under development. The goal is to have

Strategies and arguments of ergonomic design for sustainability.

PubMed

Marano, Antonio; Di Bucchianico, Giuseppe; Rossi, Emilio

2012-01-01

Referring to the discussion recently promoted by the Sub-Technical Committee n°4 "Ergonomics and design for sustainability", in this paper will be shown the early results of a theoretical and methodological study on Ergonomic design for sustainability. In particular, the research is based on the comparison between the common thematic structure characterizing Ergonomics, with the principles of Sustainable Development and with criteria adopted from other disciplines already oriented toward Sustainability. The paper identifies an early logical-interpretative model and describes possible and relevant Strategies of Ergonomic design for sustainability, which are connected in a series of specific Sustainable Arguments.

State of Science: ergonomics and global issues.

PubMed

Thatcher, Andrew; Waterson, Patrick; Todd, Andrew; Moray, Neville

2018-02-01

In his 1993 IEA keynote address, Neville Moray urged the ergonomics discipline to face up to the global problems facing humanity and consider how ergonomics might help find some of the solutions. In this State of Science article we critically evaluate what the ergonomics discipline has achieved in the last two and a half decades to help create a secure future for humanity. Moray's challenges for ergonomics included deriving a value structure that moves us beyond a Westernised view of worker-organisation-technology fit, taking a multidisciplinary approach which engages with other social and biological sciences, considering the gross cross-cultural factors that determine how different societies function, paying more attention to mindful consumption, and embracing the complexity of our interconnected world. This article takes a socio-historical approach by considering the factors that influence what has been achieved since Moray's keynote address. We conclude with our own set of predictions for the future and priorities for addressing the challenges that we are likely to face. Practitioner Summary: We critically reflect on what has been achieved by the ergonomics profession in addressing the global challenges raised by Moray's 1993 keynote address to the International Ergonomics Association. Apart from healthcare, the response has largely been weak and disorganised. We make suggestions for priority research and practice that is required to facilitate a sustainable future for humanity.

The demands and benefits of ergonomics in Sri Lankan apparel industry: A case study at MAS holdings.

PubMed

Abeysekera, John; Illankoon, Prasanna

2016-10-17

Apparel exports bring in sizeable foreign income to Sri Lanka. To protect and promote this industry is a paramount need. This can be carried out by applying Human Factors/Ergonomics (HFE) which has proved to control negative effects at work places. This paper reports a case study which describes the demands and benefits of HFE in MAS Holdings which owns a large share of the apparel industry in Sri Lanka. The study consisted of walk through observation survey, a questionnaire survey and ergonomic work place analysis followed by a training programme to selected employees in three companies. Positive responses to questionnaires revealed good ergonomic practices in the work places surveyed. Ergonomically unfit chairs and potential hazards e.g. exposure to noise and hot environment were detected. It is seen that MAS have introduced strategies originated by Toyota Production System viz. 5S, Kaizen, six sigma etc., which are in fact ergonomic methods. A progressive project MAS boast of viz. 'MAS Operating System' (MOS) empowers training and development to employees. MAS Holdings has adequately realized the benefits of applying HFE as evident by the number of awards received. Relevant companies were advised to take appropriate corrective measures to control the potential hazards.

Ergonomic positioning or equipment for treating carpal tunnel syndrome.

PubMed

O'Connor, Denise; Page, Matthew J; Marshall, Shawn C; Massy-Westropp, Nicola

2012-01-18

Non-surgical treatment, including ergonomic positioning or equipment, are sometimes offered to people experiencing mild to moderate symptoms from carpal tunnel syndrome (CTS). The effectiveness and duration of benefit from ergonomic positioning or equipment interventions for treating CTS are unknown. To assess the effects of ergonomic positioning or equipment compared with no treatment, a placebo or another non-surgical intervention in people with CTS. We searched the Cochrane Neuromuscular Disease Group Specialized Register (14 June 2011), the Cochrane Central Register of Controlled Trials (CENTRAL) (2011, Issue 2, in The Cochrane Library), MEDLINE (1966 to June 2011), EMBASE (1980 to June 2011), CINAHL Plus (1937 to June 2011), and AMED (1985 to June 2011). We also reviewed the reference lists of randomised or quasi-randomised trials identified from the electronic search. Randomised or quasi-randomised controlled trials comparing ergonomic positioning or equipment with no treatment, placebo or another non-surgical intervention in people with CTS. Two review authors independently selected trials for inclusion, extracted data and assessed risk of bias of included studies. We calculated risk ratios (RR) and mean differences (MD) with 95% confidence intervals (CI) for the primary and secondary outcomes. We pooled results of clinically and statistically homogeneous trials, where possible, to provide estimates of the effect of ergonomic positioning or equipment. We included two trials (105 participants) comparing ergonomic versus placebo keyboards. Neither trial assessed the primary outcome (short-term overall improvement) or adverse effects of interventions. In one small trial (25 participants) an ergonomic keyboard significantly reduced pain after 12 weeks (MD -2.40; 95% CI -4.45 to -0.35) but not six weeks (MD -0.20; 95% CI -1.51 to 1.11). In this same study, there was no difference between ergonomic and standard keyboards in hand function at six or 12 weeks or palm

Ergonomic Microscope: Need of the Hour

PubMed Central

Mhaske, Shubhangi Ashok; Ahmad, Malik Ajaz; Yuwanati, Monal B.; Prabhu, Shweta; Pardhe, Nilesh

2015-01-01

Background Prolonged use of conventional microscope develops musculo-skeletal injuries like chronic pain syndrome, including shoulder, neck, back aches & fatigue. Since the problems go unnoticed, the injuries can lead to some serious permanent damages. This further leads to a compromise in the health and welfare of the person and the institute. Hence, an understanding about the ergonomics is the need of the hour in this postmodern era. Inspite of few studies and surveys about ergonomics, there is still a steep rise in the musculoskeletal disorders. Aim of the Study The aim of our study was to gauge the general awareness of pathologists, microbiologists and oral pathologists towards ergonomics in their profession. Materials and Methods A cross-sectional survey based study was de­signed, which included a questionnaire. The questionnaire included multiple choice questions with four alternatives. Professionals (pathologists, microbiologists and oral pathologists) were included in the survey. Teaching faculty (Professors, Associate Professors and Lecturers) and Post graduate students formed the study group. Results and Observations The response to the questionnaire was 100%. Less than 50% of oral pathologists were aware of the importance of ergonomics in their profession. The most common site affected was neck and back. One of the drastic observations was that, Oral Pathologists suffered from a combination of problems affecting neck, back, eyes, headache, shoulders, arms and wrists. Conclusion Increase in our understanding regarding ergonomic­ally designed microscopes can increase our efficiency and in turn improve our general well-being. With improvements in ergonomics, professionals would be able to modify and optimize their working conditions. Certain guidelines need to be followed by the profes­sionals to reduce chances of musculoskeletal disorders. PMID:26155565

Investigation on musculoskeletal discomfort and ergonomics risk factors among production team members at an automotive component assembly plant

NASA Astrophysics Data System (ADS)

Aziz, Fazilah Abdul; Ghazalli, Zakri; Zuki Mohamed, Nik Mohd; Isfar, Amri

2017-10-01

Musculoskeletal discomfort (MSD) is very common condition in automotive industry. MSD is affecting the worker’s health, well-being and lower down the productivity. Therefore, the main objective of this study was to identify the prevalence of MSD and ergonomics risk factors among the production team members at a selected automotive component manufacturer in Malaysia. MSD data were collected by conducting structure interview with all participants by referring to the Cornell Musculoskeletal Disorder Questionnaire (CMDQ). Those production team members who achieved a total discomfort score for all body regions more than 100 was selected for job task assessment. The physical exposure risk factors of work related musculoskeletal disorders (WMSD) has evaluated by using Quick Exposure Check (QEC) techniques. The results of the study identified the severe MSD associated with production assembly team members. It is expected that the prevalence of MSD for those production assembly team members was lower back (75.4%), upper back (63.2%), right shoulder (61.4%), and right wrist (60%). The QEC analysis discovered that about 70% of job tasks had very high risks for neck posture and 60% had high risks for the back (in moving condition) and shoulder/arm postures. There were 80% of respondents have produced a high score for exposure risk to vibration. As a conclusion, the main implication of the current study is that special attention should be paid to the physical and psychosocial aspects in production team members with musculoskeletal discomfort to improve their safety, health, and well-being, maintain work ability and productivity.

76 FR 72404 - Pesticides: Availability of Pesticide Registration Notice Regarding the Non-Dietary Exposure Task...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-23

... Pesticide Registration Notice Regarding the Non-Dietary Exposure Task Force AGENCY: Environmental Protection... Registration Notice (PR Notice) regarding the data development efforts of the Non-Dietary Exposure Task Force... participate. FOR FURTHER INFORMATION CONTACT: Richard P. Dumas, Pesticide Re- evaluation Division (7508P...

'The perfect is the enemy of the good' - ergonomics research and practice. Institute of Ergonomics and Human Factors Annual Lecture 2010.

PubMed

Buckle, Peter

2011-01-01

The relationship between research and practice in ergonomics and human factors has rarely been addressed in the literature. This presents specific problems for researchers when seeking to relate their work to the research community. Equally, practitioners are often frustrated by the lack of appropriate research to meet their needs. This paper seeks to identify current drivers for ergonomics research along with an analysis of how these are changing. Specifically, the use of bibliometric data to assess research output and its impact on a multi-disciplinary subject such as ergonomics is examined. Areas where action may be required to stimulate better research and improved practice are proposed. These include a greater role for the practitioner in completing the circle of knowledge and improving the evidence base for practice with, in particular, practitioners becoming more active in determining research priorities. It is concluded that combined effort is needed by researcher and practitioner communities to enable and promote a more effective understanding of the true impact of ergonomics across industry and society. STATEMENT OF RELEVANCE: The relationship between ergonomics research and practice is examined. Research 'drivers' are identified, including the influence of bibliometric data. Implications for researchers and practitioners are discussed. The role of practitioners in completing the circle of knowledge and improving the ergonomics evidence base is stressed, as is the need to promote the impact of ergonomics across society.

The Use Of Computational Human Performance Modeling As Task Analysis Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacuqes Hugo; David Gertman

2012-07-01

During a review of the Advanced Test Reactor safety basis at the Idaho National Laboratory, human factors engineers identified ergonomic and human reliability risks involving the inadvertent exposure of a fuel element to the air during manual fuel movement and inspection in the canal. There were clear indications that these risks increased the probability of human error and possible severe physical outcomes to the operator. In response to this concern, a detailed study was conducted to determine the probability of the inadvertent exposure of a fuel element. Due to practical and safety constraints, the task network analysis technique was employedmore » to study the work procedures at the canal. Discrete-event simulation software was used to model the entire procedure as well as the salient physical attributes of the task environment, such as distances walked, the effect of dropped tools, the effect of hazardous body postures, and physical exertion due to strenuous tool handling. The model also allowed analysis of the effect of cognitive processes such as visual perception demands, auditory information and verbal communication. The model made it possible to obtain reliable predictions of operator performance and workload estimates. It was also found that operator workload as well as the probability of human error in the fuel inspection and transfer task were influenced by the concurrent nature of certain phases of the task and the associated demand on cognitive and physical resources. More importantly, it was possible to determine with reasonable accuracy the stages as well as physical locations in the fuel handling task where operators would be most at risk of losing their balance and falling into the canal. The model also provided sufficient information for a human reliability analysis that indicated that the postulated fuel exposure accident was less than credible.« less

The Impact of Ergonomically Designed Workstations on Shoulder EMG Activity during Carpet Weaving

PubMed Central

Motamedzade, Majid; Afshari, Davood; Soltanian, Alireza

2014-01-01

Background: The present study aimed to evaluate the biomechanical exposure to the trapezius muscle activity in female weavers for a prolonged period in the workstation A (suggested by previous studies) and workstation B (proposed by the present study). Methods: Electromyography data were collected from nine females during four hours for each ergonomically designed workstation at the Ergonomics Laboratory, Hamadan, Iran. The design criteria for ergonomically designed workstations were: 1) weaving height (20 and 3 cm above elbow height for workstations A and B, respectively), and 2) seat type (10° and 0° forwardsloping seat for workstations A and B, respectively). Results: The amplitude probability distribution function (APDF) analysis showed that the left and right upper trapezius muscle activity was almost similar at each workstation. Trapezius muscle activity in the workstation A was signifi­cantly greater than workstations B (P<0.001). Conclusion: In general, use of workstation B leads to significantly reduced muscle activity levels in the upper trapezius as compared to workstation A in weavers. Despite the positive impact of workstation B in reducing trapezius muscle activity, it seems that constrained postures of the upper arm during weaving may be associated with musculoskeletal symptoms. PMID:25650180

The Impact of Ergonomically Designed Workstations on Shoulder EMG Activity during Carpet Weaving.

PubMed

Motamedzade, Majid; Afshari, Davood; Soltanian, Alireza

2014-01-01

The present study aimed to evaluate the biomechanical exposure to the trapezius muscle activity in female weavers for a prolonged period in the workstation A (suggested by previous studies) and workstation B (proposed by the present study). Electromyography data were collected from nine females during four hours for each ergonomically designed workstation at the Ergonomics Laboratory, Hamadan, Iran. The design criteria for ergonomically designed workstations were: 1) weaving height (20 and 3 cm above elbow height for workstations A and B, respectively), and 2) seat type (10° and 0° forwardsloping seat for workstations A and B, respectively). The amplitude probability distribution function (APDF) analysis showed that the left and right upper trapezius muscle activity was almost similar at each workstation. Trapezius muscle activity in the workstation A was signifi-cantly greater than workstations B (P<0.001). In general, use of workstation B leads to significantly reduced muscle activity levels in the upper trapezius as compared to workstation A in weavers. Despite the positive impact of workstation B in reducing trapezius muscle activity, it seems that constrained postures of the upper arm during weaving may be associated with musculoskeletal symptoms.

A brief essay on ergonomics in graphic design.

PubMed

Mendonça, André N F; van der Linden, Júlio C S; Fonseca, Tania M G

2012-01-01

Through Brazilian publication revision on the relations amongst Ergonomics and Design, we observed the tendency towards an approach focusing on product design. However, it is our duty to question which would be the influences of ergonomics in the graphic design. As a methodology, we considered the identification that the practices derived from ergonomics as epistemic system found in the main bibliography related to graphic design.

Ergonomics in the electronic library.

PubMed Central

Thibodeau, P L; Melamut, S J

1995-01-01

New technologies are changing the face of information services and how those services are delivered. Libraries spend a great deal of time planning the hardware and software implementations of electronic information services, but the human factors are often overlooked. Computers and electronic tools have changed the nature of many librarians' daily work, creating new problems, including stress, fatigue, and cumulative trauma disorders. Ergonomic issues need to be considered when designing or redesigning facilities for electronic resources and services. Libraries can prevent some of the common problems that appear in the digital workplace by paying attention to basic ergonomic issues when designing workstations and work areas. Proper monitor placement, lighting, workstation setup, and seating prevent many of the common occupational problems associated with computers. Staff training will further reduce the likelihood of ergonomic problems in the electronic workplace. PMID:7581189

30 years of ergonomics at 3M: a case study.

PubMed

Larson, N; Wick, H

2012-01-01

The added value of the Ergonomics Program at 3M was found to be improved employee safety, compliance with regulations and reduction of work-related illness, increases in productivity, and quality and operating efficiency. This paper describes the thirty years of existence of this program. For the first twenty years, the program objectives were to: respond to requests for assistance related to work-related musculoskeletal disorder (WMSD) concerns, raise employee awareness of MSDs and ergonomics; educate engineers in ergonomics design; and develop ergonomics teams at manufacturing locations. Since the year 2000, 3M's Ergonomics Program has been in transition from a US-centric and corporate-based technical-expertled program to a global program applying participatory ergonomics strategies within a macroergonomics framework. During that transition, the existing program requirements were revised, new methods and program tools were created, and expectations for implementation at the manufacturing locations clarified. This paper focuses on the company's manufacturing ergonomics program activities during the past ten years and includes specifics of the program's objectives, risk assessment reduction process, and ergonomics technical expertise development. The main benefit achieved throughout the company is reducing employee injury while also increasing productivity and operating efficiency.

Dental Hygiene Students' Self-Assessment of Ergonomics Utilizing Photography.

PubMed

Partido, Brian B

2017-10-01

Due to postural demands, dental professionals are at high risk for developing work-related musculoskeletal disorders (WMSDs). Dental clinicians' lack of ergonomic awareness may impede the clinical application of recommendations to improve their posture. The aim of this study was to determine whether feedback involving photography and self-assessment would improve dental hygiene students' ergonomic scores and accuracy of their ergonomic self-assessments. The study involved a randomized control design and used a convenience sample of all 32 junior-year dental hygiene students enrolled in the autumn 2016 term in The Ohio State University baccalaureate dental hygiene program. Sixteen students were randomly assigned to each of two groups (control and training). At weeks one and four, all participants were photographed and completed ergonomic self-evaluations using the Modified-Dental Operator Posture Assessment Instrument (M-DOPAI). During weeks two and three, participants in the training group were photographed again and used those photographs to complete ergonomic self-assessments. All participants' pre-training and post-training photographs were given ergonomic scores by three raters. Students' self-assessments in the control group and faculty evaluations of the training group showed significant improvement in scores over time (F(1,60)=4.25, p<0.05). In addition, the accuracy of self-assessment significantly improved for students in the training group (F(1,30)=8.29, p<0.01). In this study, dental hygiene students' self-assessments using photographs resulted in improvements in their ergonomic scores and increased accuracy of their ergonomic self-assessments. Any improvement in ergonomic score or awareness can help reduce the risks for WMSDs, especially among dental clinicians.

Laparoendoscopic single site (LESS) in vivo suturing using a magnetic anchoring and guidance system (MAGS) camera in a porcine model: impact on ergonomics and workload.

PubMed

Yin, Gang; Han, Woong Kyu; Faddegon, Stephen; Tan, Yung Khan; Liu, Zhuo-Wei; Olweny, Ephrem O; Scott, Daniel J; Cadeddu, Jeffrey A

2013-01-01

To compare the ergonomics and workload of the surgeon during single-site suturing while using the magnetic anchoring and guidance system (MAGS) camera vs a conventional laparoscope. Seven urologic surgeons were enrolled and divided into an expert group (n=2) and a novice group (n=5) according to their laparoendoscopic single-site (LESS) experience. Each surgeon performed 2 conventional LESS and 2 MAGS camera-assisted LESS vesicostomy closures in a porcine model. A Likert scale (scoring 1-5) questionnaire assessing workload, ergonomics, technical difficulty, visualization, and needle handling, as well as a validated National Aeronautics and Space Administration Task Load Index (NASA-TLX) questionnaire were used to evaluate the tasks and workloads. MAGS LESS suturing was universally favored by expert and novice surgeons compared with conventional LESS in workload (3.4 vs 4.2), ergonomics (3.4 vs 4.4), technical challenge (3.3 vs 4.3), visualization (2.4 vs 3.3), and needle handling (3.1 vs 3.9 respectively; P<.05 for all categories). Surgeon NASA-TLX assessments found MAGS LESS suturing significantly decreased the workload in physical demand (P=.004), temporal demand (P=.017), and effort (P=.006). External instrument clashing was significantly reduced in MAGS LESS suturing (P<.001). The total operative time of MAGS LESS suturing was comparable to that of conventional LESS (P=.89). MAGS camera technology significantly decreased surgeon workload and improved ergonomics. Nevertheless, LESS suturing and knot tying remains a challenging task that requires training, regardless of which camera is used. Copyright © 2013 Elsevier Inc. All rights reserved.

The ergonomics of learning: educational design and learning performance.

PubMed

Smith, T J

2007-10-01

The application of ergonomics/human factors (E/HF) principles and practices, and the implementation of ergonomics programmes, have achieved proven success in improving performance, productivity, competitiveness, and safety and health in most occupational sectors. However, the benefits that the application of E/HF science might bring to promoting student learning have yet to be widely recognized. This paper deals with the fundamental purpose of education - student learning - and with the question of how the ergonomic design of the learning environment influences learning performance. The underlying premise, embodied in the quote below, is that student learning performance to a substantial degree is context specific - influenced and specialized in relation to specific design factors in the learning environment. The basic scientific question confronting learning ergonomics is which design characteristics in the learning environment have the greatest influence on variability in learning performance. Practically, the basic challenge is to apply this scientific understanding to ergonomic interventions directed at design improvements of learning environments to benefit learning. This paper expands upon these themes by addressing the origins and scope of learning ergonomics, differing perspectives on the nature of learning, evidence for context specificity in learning and conclusions and research implications regarding an ergonomics perspective on learning.

Effect of continuous gamma-ray exposure on performance of learned tasks and effect of subsequent fractionated exposures on blood-forming tissue

NASA Technical Reports Server (NTRS)

Spalding, J. F.; Holland, L. M.; Prine, J. R.; Farrer, D. N.; Braun, R. G.

1972-01-01

Sixteen monkeys trained to perform continuous and discrete-avoidance and fixed-ratio tasks with visual and auditory cues were performance-tested before, during, and after 10-day gamma-ray exposures totaling 0, 500, 750, and 1000 rads. Approximately 14 months after the performance-test exposures, surviving animals were exposed to 100-rad gamma-ray fractions at 56-day intervals to observe injury and recovery patterns of blood-forming tissues. The fixed-ratio, food-reward task performance showed a transient decline in all dose groups within 24 hours of the start of gamma-ray exposure, followed by recovery to normal food-consumption levels within 48 to 72 hours. Avoidance tasks were performed successfully by all groups during the 10-day exposure, but reaction times of the two higher dose-rate groups in which animals received 3 and 4 rads per hour or total doses of 750 and 1000 rads, respectively, were somewhat slower.

Ergonomic analysis of construction worker's body postures using wearable mobile sensors.

PubMed

Nath, Nipun D; Akhavian, Reza; Behzadan, Amir H

2017-07-01

Construction jobs are more labor-intensive compared to other industries. As such, construction workers are often required to exceed their natural physical capability to cope with the increasing complexity and challenges in this industry. Over long periods of time, this sustained physical labor causes bodily injuries to the workers which in turn, conveys huge losses to the industry in terms of money, time, and productivity. Various safety and health organizations have established rules and regulations that limit the amount and intensity of workers' physical movements to mitigate work-related bodily injuries. A precursor to enforcing and implementing such regulations and improving the ergonomics conditions on the jobsite is to identify physical risks associated with a particular task. Manually assessing a field activity to identify the ergonomic risks is not trivial and often requires extra effort which may render it to be challenging if not impossible. In this paper, a low-cost ubiquitous approach is presented and validated which deploys built-in smartphone sensors to unobtrusively monitor workers' bodily postures and autonomously identify potential work-related ergonomic risks. Results indicates that measurements of trunk and shoulder flexions of a worker by smartphone sensory data are very close to corresponding measurements by observation. The proposed method is applicable for workers in various occupations who are exposed to WMSDs due to awkward postures. Examples include, but are not limited to industry laborers, carpenters, welders, farmers, health assistants, teachers, and office workers. Copyright © 2017 Elsevier Ltd. All rights reserved.

Corporate ergonomics programme at Ford Motor Company.

PubMed

Joseph, Bradley S

2003-01-01

The use of ergonomic principles in automobile assembly and manufacturing operations has become an important part of a comprehensive health and safety process as well as an integral part of the engineering systems. Ford Motor Company has developed an ergonomics process to manage issues related to injury and illness (e.g., musculoskeletal diseases) and to ensure the appropriate use of human resources on the plant floor. The ergonomics programme uses joint labour and management teams to identify and evaluate jobs and develop and implement solutions. This paper summarises the efforts of the Ford Motor Company in implementing and maintaining the programme. Key strategies are outlined that provide important links to internal organisational units that are critical to fully utilise the ergonomics process. In addition, the paper outlines differences between proactive and reactive efforts and shows the importance of using the information generated by the initiatives for process improvement.

New procedures of ergonomics design in a large oil company.

PubMed

Alhadeff, Cynthia Mossé; Silva, Rosana Fernandes da; Reis, Márcia Sales dos

2012-01-01

This study presents the challenge involved in the negotiation and construction of a standard process in a major petroleum company that has the purpose of guiding the implementation of ergonomic studies in the development of projects, systemising the implementation of ergonomics design. The standard was created by a multi-disciplinary working group consisting of specialists in ergonomics, who work in a number of different areas of the company. The objective was to guide "how to" undertake ergonomics in all projects, taking into consideration the development of the ergonomic appraisals of work. It also established that all the process, in each project phase, should be accompanied by a specialist in ergonomics. This process as an innovation in the conception of projects in this company, signals a change of culture, and, for this reason requires broad dissemination throughout the several company leadership levels, and training of professionals in projects of ergonomics design. An implementation plan was also prepared and approved by the corporate governance, complementing the proposed challenge. In this way, this major oil company will implement new procedures of ergonomics design to promote health, safety, and wellbeing of the workforce, besides improving the performance and reliability of its systems and processes.

Evaluation of ergonomic factors and postures that cause muscle pains in dentistry students' bodies.

PubMed

Shirzaei, Masoumeh; Mirzaei, Ramazan; Khaje-Alizade, Ali; Mohammadi, Mahdi

2015-07-01

Work-related musculoskeletal disorders commonly experienced by dental professionals are one of the main occupational health problem affecting their health and well-being.This study was conducted to evaluate ergonomic factors and profession-related postures and also investigate relationship between demographic factors and work condition with pain in dental students. 60 freshman and sophomore dentistry students were randomly chosen as the subjects of control group, and 60 of 5th and 6th-year students were selected as the members of exposure group. Data related to the subjects such as sex, doing exercise, severity of musculoskeletal pain were obtained through questionnaire. Students' postures were directly observed while treating patients and they were scored by REBA method. Data were analyzed by SPSS software using Man-Whitney, Kruskal-Wallis, Spearman and Kendall correlation tests. 80.8% of the subjects were not aware of the correct ergonomic postures for dental procedures. Severity of musculoskeletal pain in the exposure group (15.9± 4.2) was significantly higher than the control group (10.5 ±3.2), (p <0.001). Risk of the most subjects (84%) was at the medium level. Students who were more involved in clinical activities experienced more muscular pains. The musculoskeletal disorders are probable prolonged in working hours in static positions, incorrect work postures, implying more force and even tools and instruments. Therefore, students who are aware of ergonomic principals of their own profession would be able to maintain their health through activities and lifelong. Key words:Posture, dentistry, students, musculoskeletal pain.

Evaluation of ergonomic factors and postures that cause muscle pains in dentistry students’ bodies

PubMed Central

Shirzaei, Masoumeh; Khaje-Alizade, Ali; Mohammadi, Mahdi

2015-01-01

Background Work-related musculoskeletal disorders commonly experienced by dental professionals are one of the main occupational health problem affecting their health and well-being.This study was conducted to evaluate ergonomic factors and profession-related postures and also investigate relationship between demographic factors and work condition with pain in dental students. Material and Methods 60 freshman and sophomore dentistry students were randomly chosen as the subjects of control group, and 60 of 5th and 6th-year students were selected as the members of exposure group. Data related to the subjects such as sex, doing exercise, severity of musculoskeletal pain were obtained through questionnaire. Students’ postures were directly observed while treating patients and they were scored by REBA method. Data were analyzed by SPSS software using Man-Whitney, Kruskal-Wallis, Spearman and Kendall correlation tests. Results 80.8% of the subjects were not aware of the correct ergonomic postures for dental procedures. Severity of musculoskeletal pain in the exposure group (15.9± 4.2) was significantly higher than the control group (10.5 ±3.2), (p <0.001). Risk of the most subjects (84%) was at the medium level. Students who were more involved in clinical activities experienced more muscular pains. Conclusions The musculoskeletal disorders are probable prolonged in working hours in static positions, incorrect work postures, implying more force and even tools and instruments. Therefore, students who are aware of ergonomic principals of their own profession would be able to maintain their health through activities and lifelong. Key words:Posture, dentistry, students, musculoskeletal pain. PMID:26330941

Ergonomics and sustainability: towards an embrace of complexity and emergence.

PubMed

Dekker, Sidney W A; Hancock, Peter A; Wilkin, Peter

2013-01-01

Technology offers a promising route to a sustainable future, and ergonomics can serve a vital role. The argument of this article is that the lasting success of sustainability initiatives in ergonomics hinges on an examination of ergonomics' own epistemology and ethics. The epistemology of ergonomics is fundamentally empiricist and positivist. This places practical constraints on its ability to address important issues such as sustainability, emergence and complexity. The implicit ethical position of ergonomics is one of neutrality, and its positivist epistemology generally puts value-laden questions outside the parameters of what it sees as scientific practice. We argue, by contrast, that a discipline that deals with both technology and human beings cannot avoid engaging with questions of complexity and emergence and seeking innovative ways of addressing these issues. Ergonomics has largely modelled its research on a reductive science, studying parts and problems to fix. In sustainability efforts, this can lead to mere local adaptations with a negative effect on global sustainability. Ergonomics must consider quality of life globally, appreciating complexity and emergent effects of local relationships.

Exposure to Unsolvable Anagrams Impairs Performance on the Iowa Gambling Task

PubMed Central

Starcke, Katrin; Agorku, Janet D.; Brand, Matthias

2017-01-01

Recent research indicates that external manipulations, such as stress or mood induction, can affect decision-making abilities. In the current study, we investigated whether the exposure to an unsolvable task affected subsequent performance on the Iowa Gambling Task. Participants were randomly assigned to a condition in which they were exposed to unsolvable anagrams (n = 20), or a condition in which they worked on solvable anagrams (n = 22). Afterwards, all participants played the Iowa Gambling Task, a prominent task that measures decision making under uncertain conditions with no explicit rules for gains and losses. In this task, it is essential to process feedback from previous decisions. The results demonstrated that participants who worked on unsolvable anagrams made more disadvantageous decisions on the Iowa Gambling Task than the other participants. In addition, a significant gender effect was observed: Males who worked on unsolvable anagrams made a more disadvantageous decisions than the other male participants. Females who worked on unsolvable anagrams also made more disadvantageous decision than the other female participants, but differences were small and not significant. We conclude that the exposure to unsolvable anagrams induced the experience of uncontrollability which can elicit stress and learned helplessness. Stress and learned helplessness might have reduced the ability to learn from the given feedback, particularly in male participants. We assume that in real life, uncontrollable challenges that last longer than a single experimental manipulation can affect decision making severely, at least in males. PMID:28642693

Combined analysis of job and task benzene air exposures among workers at four US refinery operations

PubMed Central

Shin, Jennifer (Mi); Unice, Ken M; Gaffney, Shannon H; Kreider, Marisa L; Gelatt, Richard H; Panko, Julie M

2016-01-01

Workplace air samples analyzed for benzene at four US refineries from 1976 to 2007 were pooled into a single dataset to characterize similarities and differences between job titles, tasks and refineries, and to provide a robust dataset for exposure reconstruction. Approximately 12,000 non-task (>180 min) personal samples associated with 50 job titles and 4000 task (<180 min) samples characterizing 24 tasks were evaluated. Personal air sample data from four individual refineries were pooled based on a number of factors including (1) the consistent sampling approach used by refinery industrial hygienists over time, (2) the use of similar exposure controls, (3) the comparability of benzene content of process streams and end products, (4) the ability to assign uniform job titles and task codes across all four refineries, and (5) our analysis of variance (ANOVA) of the distribution of benzene air concentrations for select jobs/tasks across all four refineries. The jobs and tasks most frequently sampled included those with highest potential contact with refinery product streams containing benzene, which reflected the targeted sampling approach utilized by the facility industrial hygienists. Task and non-task data were analyzed to identify and account for significant differences within job-area, task-job, and task-area categories. This analysis demonstrated that in general, areas with benzene containing process streams were associated with greater benzene air concentrations compared to areas with process streams containing little to no benzene. For several job titles and tasks analyzed, there was a statistically significant decrease in benzene air concentration after 1990. This study provides a job and task-focused analysis of occupational exposure to benzene during refinery operations, and it should be useful for reconstructing refinery workers’ exposures to benzene over the past 30 years. PMID:26862134

Combined analysis of job and task benzene air exposures among workers at four US refinery operations.

PubMed

Burns, Amanda; Shin, Jennifer Mi; Unice, Ken M; Gaffney, Shannon H; Kreider, Marisa L; Gelatt, Richard H; Panko, Julie M

2017-03-01

Workplace air samples analyzed for benzene at four US refineries from 1976 to 2007 were pooled into a single dataset to characterize similarities and differences between job titles, tasks and refineries, and to provide a robust dataset for exposure reconstruction. Approximately 12,000 non-task (>180 min) personal samples associated with 50 job titles and 4000 task (<180 min) samples characterizing 24 tasks were evaluated. Personal air sample data from four individual refineries were pooled based on a number of factors including (1) the consistent sampling approach used by refinery industrial hygienists over time, (2) the use of similar exposure controls, (3) the comparability of benzene content of process streams and end products, (4) the ability to assign uniform job titles and task codes across all four refineries, and (5) our analysis of variance (ANOVA) of the distribution of benzene air concentrations for select jobs/tasks across all four refineries. The jobs and tasks most frequently sampled included those with highest potential contact with refinery product streams containing benzene, which reflected the targeted sampling approach utilized by the facility industrial hygienists. Task and non-task data were analyzed to identify and account for significant differences within job-area, task-job, and task-area categories. This analysis demonstrated that in general, areas with benzene containing process streams were associated with greater benzene air concentrations compared to areas with process streams containing little to no benzene. For several job titles and tasks analyzed, there was a statistically significant decrease in benzene air concentration after 1990. This study provides a job and task-focused analysis of occupational exposure to benzene during refinery operations, and it should be useful for reconstructing refinery workers' exposures to benzene over the past 30 years.

Office ergonomics: deficiencies in computer workstation design.

PubMed

Shikdar, Ashraf A; Al-Kindi, Mahmoud A

2007-01-01

The objective of this research was to study and identify ergonomic deficiencies in computer workstation design in typical offices. Physical measurements and a questionnaire were used to study 40 workstations. Major ergonomic deficiencies were found in physical design and layout of the workstations, employee postures, work practices, and training. The consequences in terms of user health and other problems were significant. Forty-five percent of the employees used nonadjustable chairs, 48% of computers faced windows, 90% of the employees used computers more than 4 hrs/day, 45% of the employees adopted bent and unsupported back postures, and 20% used office tables for computers. Major problems reported were eyestrain (58%), shoulder pain (45%), back pain (43%), arm pain (35%), wrist pain (30%), and neck pain (30%). These results indicated serious ergonomic deficiencies in office computer workstation design, layout, and usage. Strategies to reduce or eliminate ergonomic deficiencies in computer workstation design were suggested.

Digital vibration threshold testing and ergonomic stressors in automobile manufacturing workers: a cross-sectional assessment.

PubMed

Gold, J E; Punnett, L; Cherniack, M; Wegman, D H

2005-01-01

Upper extremity musculoskeletal disorders (UEMSDs) comprise a large proportion of work-related illnesses in the USA. Physical risk factors including manual force and segmental vibration have been associated with UEMSDs. Reduced sensitivity to vibration in the fingertips (a function of nerve integrity) has been found in those exposed to segmental vibration, to hand force, and in office workers. The objective of this study was to determine whether an association exists between digital vibration thresholds (VTs) and exposure to ergonomic stressors in automobile manufacturing. Interviews and physical examinations were conducted in a cross-sectional survey of workers (n = 1174). In multivariable robust regression modelling, associations with workers' estimates of ergonomic stressors stratified on tool use were determined. VTs were separately associated with hand force, vibration as felt through the floor (whole body vibration), and with an index of multiple exposures in both tool users and non-tool users. Additional associations with contact stress and awkward upper extremity postures were found in tool users. Segmental vibration was not associated with VTs. Further epidemiologic and laboratory studies are needed to confirm the associations found. The association with self-reported whole body vibration exposure suggests a possible sympathetic nervous system effect, which remains to be explored.

Finding ergonomic solutions--participatory approaches.

PubMed

Hignett, Sue; Wilson, John R; Morris, Wendy

2005-05-01

This paper gives an overview of the theory of participatory ergonomics interventions and summary examples from a range of industries, including health care, military, manufacturing, production and processing, services, construction and transport. The definition of participatory approaches includes interventions at macro (organizational, systems) levels as well as micro (individual), where workers are given the opportunity and power to use their knowledge to address ergonomic problems relating to their own working activities. Examples are given where a cost-effective benefit has been measured using musculoskeletal sickness absence and compensation costs. Other examples, using different outcome measures, also showed improvements, for example, an increase in productivity, improved communication between staff and management, reduction in risk factors, the development of new processes and new designs for work environments and activities. Three cases are described from Canada and Japan where the participatory project was led by occupational health teams, suggesting that occupational health practitioners can have an important role to play in participatory ergonomics projects.

Participatory ergonomics intervention in an industrially developing country--a case study.

PubMed

Helali, Faramarz; Lönnroth, Emma-Christin; Shahnavaz, Houshang

2008-01-01

In industrially developing countries, a few ergonomists have directed great efforts towards developing ergonomics awareness among managers and workers in organizations. There is little research on the degree of their success, though. Furthermore, access of organizations to ergonomics knowledge is usually very difficult, especially in industrially developing countries. Thus, building ergonomics awareness is certainly the first phase of the process. Three companies from one industry (44 people: 14 females and 30 males) participated in a project aimed at improving their work system. At the beginning, we needed to create a common goal and ensure participation with appropriate ergonomics tools. The findings of this study were the key issue for the ergonomics intervention (i.e., a shared vision, awakened need of change and learning). Further, to build ergonomics awareness and develop a continuous learning process in the company, it was necessary to use more ergonomics tools through workers' participation in different workplaces.

Self-assessment of ergonomics amongst dental students utilising photography: RCT.

PubMed

Partido, B B; Wright, B M

2018-03-02

Dental professionals are at high risk of musculoskeletal disorders (MSDs) due to static working positions for extended periods of time. Musculoskeletal pain has been identified as early as during their entry-level dental education. The purpose of this study was to determine whether feedback involving photography and self-assessment would improve ergonomic scores and the accuracy of ergonomic self-assessments amongst dental students. The study involved a randomised control design of 135 dental students. At weeks 1 and 4, participants were photographed, and at weeks 1 through 4, participants completed ergonomic self-evaluations, using a Modified-Dental Operator Posture Assessment Instrument (M-DOPAI). During weeks 2 and 3, participants in the training group were photographed and used those photographs to complete ergonomic self-assessments. All participants' pre-training and post-training photographs were evaluated for ergonomic scores by two raters. A mixed-design ANOVA of ergonomic scores revealed that ergonomic scores improved for all students who received the ergonomics training (F(1,254)=17.41, P < .001). In addition, a mixed-design ANOVA of kappa coefficient values between student and rater scores revealed that the accuracy of self-assessments improved for all students who received the ergonomics training (F(1,127)=6.33, P < .05). The use of photographs and self-assessment provides dental and dental hygiene educators with a pragmatic method to improve self-assessment skills, increase student awareness of any postural deviations from ideal and improve musculoskeletal health. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Ergonomics in mining: the Chilean experience.

PubMed

Apud, Elías

2012-12-01

The objective of this article is to analyze the current state of knowledge regarding ergonomics in Chilean mining. Information has been gathered during the past 15 years from studies of Chilean miners. This article is based on a compilation of information of 700 workplaces where physical, mental, environmental, and organizational loads were evaluated with a systemic approach. The results of the Chilean experience reveal that it is important to overcome the concept of "static" ergonomics focused on workplaces that may be valid for offices and machine operation but not for a significant number of miners who will be moving around workstations located in systems of different complexity. The consequence of these complex and dynamic work situations is that more than 50% of absenteeism for health reasons is attributed to musculoskeletal disorders, and there are no standard recommendations that universally apply. The results showed that these problems can be tackled by implementing participatory programs. The main conclusion of the Chilean experience is that there is a need to continue advancing from diagnostic studies to participatory interventions. At the same time, it is imperative that all new investments in plants, small or large, include considerations of relevant ergonomic concepts from the early planning stages. It is also important to increase ergonomic training within companies, including not only the managers who make major decisions but also the workers who are directly affected by the lack of ergonomics. It is expected that this description of the Chilean experience may be useful for other countries where mining is also a source of income and employment.

Ergonomic analysis jobs in recovered factories.

PubMed

Cuenca, Gabriela; Zotta, Gastón

2012-01-01

With the advent of the deep economic crisis in Argentina on 2001, the recovery of companies through to the creation of the Cooperatives Working Self-Management or Factories Recovered by its workers was constituted as one of the ways in which the salaried disobeyed the increasing unemployment. When the companies turn into recovered factories they tend to leave of side practices that have been seen like imposed by the previous organization and not understanding them as a primary condition for the execution of his tasks. Safety and ergonomics are two disciplines that are no longer considered relevant to the daily work. Therefore this investigation aims to revalue, undergo semantic to give back to a place in every organization analyzed. This research developed a self-diagnostic tool for working conditions, and the environment, present in the recovered factories.

Remote online ergonomic assessment in the office environment as compared to face-to-face ergonomic assessment.

PubMed

Eyal, Levy; Ribak, Joseph; Badihi, Yehuda

2012-01-01

remote online ergonomic assessment in the office environment as compared to face-to-face ergonomic assessment and examination of the applicability of remote online ergonomic assessment to office workers. 40 employees from a large Israeli hi-tech company were ergonomically assessed per the University of California computer usage checklist, according to the two assessment types (face-to-face and remote). An additional Ergonomist "assessor 2" examined the credibility of the process. Research hypothesis 1 was verified: 21 out of 22 questions (95.45%) from the checklist indicated compatibility between "assessor 1" to the "Gold Standard" at an 80% level. Research hypothesis 2: examining the credibility between the assessors with regard to remote assessment. This hypothesis was partially verified, the correlation between the assessors was measured at 0.54. Research hypothesis 3: examining the extent of deviation of natural posture between distal body parts assessment (distant from the center of the body) and proximal body parts (close to the center of the body). This hypothesis was clearly verified. It has been proven that there is statistical significance between the results. The current research has proved that there is an additional method to assess musculoskeletal disorders risk factors remotely online at office environment.

Develop and Manufacture an Ergonomically Sound Glovebox Glove Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawton, Cindy M.

Ergonomic injury and radiation exposure are two safety concerns for the Plutonium Facility at Los Alamos National Laboratory (LANL). This facility employs the largest number of gloveboxes (GB) at LANL with approximately 6000 gloves installed. The current GB glove design dates back to the 1960’s and is not based on true hand anatomy, revealing several issues: short fingers, inappropriate length from the wrist to finger webbing, nonexistent joint angles and incorrect thumb placement. These design flaws are directly related to elbow (lateral epicondylitis) and thumb (DeQuervain’s tenosynovitis) injuries. The current design also contributes to increased wear on the glove, causingmore » unplanned glove openings (failures) which places workers at risk of exposure. An improved glovebox glove design has three significant benefits: 1) it will reduce the risk of injury, 2) it will improve comfort and productivity, and 3) it will reduce the risk of a glovebox failures. The combination of these three benefits has estimated savings of several million dollars. The new glove design incorporated the varied physical attributes of workers ranging from the 5 th percentile female to the 95th percentile male. Anthropometric hand dimensions along with current GB worker dimensions were used to develop the most comprehensive design specifications for the new glove. Collaboration with orthopedic hand surgeons also provided major contributtions to the design. The new glovebox glove was developed and manufactured incorporating over forty dimensions producing the most comprehensive ergonomically sound design. The new design received a LANL patent (patent attorney docket No: LANS 36USD1 “Protective Glove”, one of 20 highest patents awarded by the Richard P. Feynman Center for Innovation. The glove dimensions were inputed into a solid works model which was used to produce molds. The molds were then shipped to a glove manufacturer for production of the new glovebox gloves. The new

Office ergonomics programs. A case study of North American corporations.

PubMed

Moore, J S

1997-12-01

Subject matter experts from 13 North American corporations provided detailed descriptions of the historical development and the current components and operations of their office ergonomics programs. Results were summarized across corporations and presented for the following programmatic topics: backgrounds of key people, initial awareness and preliminary needs assessment, program development, program implementation, program monitoring and evaluation, program components, education and training, workstation and job analysis, early identification of cases, case management, and alternate office environments. The subject matter experts also provided comments about the strengths of their programs, their advice to others, and lessons they learned. These observations suggested the need for an office ergonomics program, and possibly other occupational health programs, to fit into a corporation's culture and capitalize on its infrastructure. Most corporations used multidisciplinary task forces or teams to develop their programs. Communication, which included training, awareness, advertising, and feedback, was also an important issue. Flexibility and simplicity were important attributes of these programs. It is hoped that this descriptive information will be helpful to some occupational health managers interested in or concerned about managerial perspectives and skills related to the development and implementation of programs within their own corporations.

Ergonomics contribution to chemical risks prevention: An ergotoxicological investigation of the effectiveness of coverall against plant pest risk in viticulture.

PubMed

Garrigou, Alain; Baldi, Isabelle; Le Frious, Patricia; Anselm, Rémy; Vallier, Martine

2011-01-01

The purpose of this article is to present the contribution of a trans-disciplinary approach focused on ergonomics and chemical risk control. We shall more precisely discuss how such an approach carried out in the field of agricultural work has made it possible to highlight serious shortcomings in the effectiveness of the coveralls that are supposed to protect vineyard workers from pesticides. The study results, as well as the whistle-blow that followed have questioned the control and prevention measures used until then. The aforementioned trans-disciplinary approach gathers knowledge and methods from epidemiology, industrial hygiene, occupational health and safety and ergonomics. Ergonomics were central in the development of the approach as it connected task and activity analysis with contamination measurements. Lastly, the first results that were obtained have been confirmed and reused by the AFSSET (Agence Française de Sécurité Sanitaire Environnement et Travail, the French governmental agency in charge of environmental health and occupational health and safety issues) regarding the agricultural sector but also for all other situations in which workers use coveralls as protection against chemical risks. Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Elementary Ergonomics

ERIC Educational Resources Information Center

Grayson, Jennifer

2009-01-01

What's the number 1 threat to young students using computers today? According to Dan Odell, Microsoft's in-house ergonomist, when he asked parents this very question, "the things they were most concerned about were online predators and people taking advantage of their kids. Ergonomics was fairly far down the list." Unfortunately, that…

Ergonomic office design and aging: a quasi-experimental field study of employee reactions to an ergonomics intervention program.

PubMed

May, Douglas R; Reed, Kendra; Schwoerer, Catherine E; Potter, Paul

2004-04-01

A naturally occurring quasi-experimental longitudinal field study of 87 municipal employees using pretest and posttest measures investigated the effects of an office workstation ergonomics intervention program on employees' perceptions of their workstation characteristics, levels of persistent pain, eyestrain, and workstation satisfaction. The study examined whether reactions differed between younger and older employees. Results revealed that workstation improvements were associated with enhanced perceptions of the workstation's ergonomic qualities, less upper back pain, and greater workstation satisfaction. Among those experiencing an improvement, the perceptions of workstation ergonomic qualities increased more for younger than older employees, supporting the "impressionable years" framework in the psychological literature on aging. Implications for human resources managers are discussed.

Fitting methods to paradigms: are ergonomics methods fit for systems thinking?

PubMed

Salmon, Paul M; Walker, Guy H; M Read, Gemma J; Goode, Natassia; Stanton, Neville A

2017-02-01

The issues being tackled within ergonomics problem spaces are shifting. Although existing paradigms appear relevant for modern day systems, it is worth questioning whether our methods are. This paper asks whether the complexities of systems thinking, a currently ubiquitous ergonomics paradigm, are outpacing the capabilities of our methodological toolkit. This is achieved through examining the contemporary ergonomics problem space and the extent to which ergonomics methods can meet the challenges posed. Specifically, five key areas within the ergonomics paradigm of systems thinking are focused on: normal performance as a cause of accidents, accident prediction, system migration, systems concepts and ergonomics in design. The methods available for pursuing each line of inquiry are discussed, along with their ability to respond to key requirements. In doing so, a series of new methodological requirements and capabilities are identified. It is argued that further methodological development is required to provide researchers and practitioners with appropriate tools to explore both contemporary and future problems. Practitioner Summary: Ergonomics methods are the cornerstone of our discipline. This paper examines whether our current methodological toolkit is fit for purpose given the changing nature of ergonomics problems. The findings provide key research and practice requirements for methodological development.

The ability of non-computer tasks to increase biomechanical exposure variability in computer-intensive office work.

PubMed

Barbieri, Dechristian França; Srinivasan, Divya; Mathiassen, Svend Erik; Nogueira, Helen Cristina; Oliveira, Ana Beatriz

2015-01-01

Postures and muscle activity in the upper body were recorded from 50 academics office workers during 2 hours of normal work, categorised by observation into computer work (CW) and three non-computer (NC) tasks (NC seated work, NC standing/walking work and breaks). NC tasks differed significantly in exposures from CW, with standing/walking NC tasks representing the largest contrasts for most of the exposure variables. For the majority of workers, exposure variability was larger in their present job than in CW alone, as measured by the job variance ratio (JVR), i.e. the ratio between min-min variabilities in the job and in CW. Calculations of JVRs for simulated jobs containing different proportions of CW showed that variability could, indeed, be increased by redistributing available tasks, but that substantial increases could only be achieved by introducing more vigorous tasks in the job, in casu illustrated by cleaning.

Ten years of experience from interactive ergonomics projects.

PubMed

Eklund, J; Karltun, J

2012-01-01

This paper highlights experiences from ergonomics projects, applying an interactive research approach. The aim of this paper is to summarise experiences from seven interactive ergonomics projects with the aim to improve ergonomics and organizational performance jointly. Results from these seven projects were analysed with a model for assessing sustainable change, including the factors active ownership, professional management, competent project leadership, and involved participants. All factors were found giving support to impact and sustainability of the change projects. However, the role of the researcher is difficult and demanding.

An ergonomic evaluation of a call center performed by disabled agents.

PubMed

Chi, Chia-Fen; Lin, Yen-Hui

2008-08-01

Potential ergonomic hazards for 27 disabled call center agents engaged in computer-telephone interactive tasks were evaluated for possible associations between the task behaviors and work-related disorders. Data included task description, 300 samples of performance, a questionnaire on workstation design, body-part discomfort rating, perceived stress, potential job stressors, and direct measurement of environmental factors. Analysis indicated agents were frequently exposed to prolonged static sitting and repetitive movements, together with unsupported back and flexed neck, causing musculoskeletal discomforts. Visual fatigue (85.2% of agents), discomfort of ears (66.7%), and musculoskeletal discomforts (59.3%) were the most pronounced and prevalent complaints after prolonged working. 17 of 27 agents described job pressure as high or very high, and dealing with difficult customers and trying to fulfill the customers' needs within the time standard were main stressors. Further work on surrounding noise, earphone use, possible hearing loss of experienced agents, training programs, feasible solutions for visual fatigue, musculoskeletal symptoms, and psychosocial stress should be conducted.

Therapist-Reported Features of Exposure Tasks That Predict Differential Treatment Outcomes for Youth With Anxiety.

PubMed

Peris, Tara S; Caporino, Nicole E; O'Rourke, Sarah; Kendall, Philip C; Walkup, John T; Albano, Anne Marie; Bergman, R Lindsey; McCracken, James T; Birmaher, Boris; Ginsburg, Golda S; Sakolsky, Dara; Piacentini, John; Compton, Scott N

2017-12-01

Exposure tasks are recognized widely as a key component of cognitive-behavioral therapy (CBT) for child and adolescent anxiety. However, little research has examined specific exposure characteristics that predict outcomes for youth with anxiety and that may guide its application in therapy. This study draws on a sample of 279 children and adolescents (48.4% male; 79.6% white) with a principal anxiety disorder who received 14 sessions of CBT, either alone or in combination with medication, through the Child/adolescent Anxiety Multimodal treatment Study (CAMS). The present study examines therapist-reported quantity, difficulty level, compliance, and mastery of exposure tasks as they related to CBT response (i.e., Clinical Global Impressions-Improvement ratings). Secondary treatment outcomes included reduction in anxiety symptom severity on the Pediatric Anxiety Rating Scale, global impairment measured via the Children's Global Assessment Scale, and parent-report of anxiety-specific functional impairment on the Child Anxiety Impairment Scale. Regression analyses indicated a dose-response relationship between therapist-reported quantity of exposure and independent evaluations of treatment outcome, with more time devoted to exposure linked to better outcomes. Similarly, greater time spent on more difficult (rather than mild or moderate) exposure tasks predicted better outcomes, as did therapist ratings of child compliance and mastery. The present findings highlight the importance of challenging children and adolescents with difficult exposure tasks and of collaborating to ensure compliance and mastery. Copyright © 2017 American Academy of Child and Adolescent Psychiatry. Published by Elsevier Inc. All rights reserved.

Ergonomics and the physiotherapist: a report on a research project on working postures.

PubMed

Bullock, M I; Lanchester, J J

1969-09-01

In a series of lectures on biomechanical principles, Professor E. R. Tichauer, an authority on man-machine-task systems, stated: "Only a few years ago, the physical work load imposed on the individual employee was much heavier than is the case today, but it was, in many occupations, fairly evenly distributed over the entire musculo skeletal system. Today, the total energy demanded from man in the performance of an industrial task has often been reduced, but stress is concentrated on individual and small components of the worker's anatomy," The techniques for combating these new stresses are found in the science of ergonomics (Hopkins 1966). Copyright © 1969 Australian Physiotherapy Association. Published by . All rights reserved.

The use of a task-based exposure assessment model (T-BEAM) for assessment of metal fume exposures during welding and thermal cutting.

PubMed

Susi, P; Goldberg, M; Barnes, P; Stafford, E

2000-01-01

Elevated disease rates have been documented among construction workers for cancer, pneumonoconiosis, asbestosis, and silicosis. However, methodologies for exposure assessment in construction are not well described in the U.S. literature. Working through a cooperative agreement with the National Institute for Occupational Safety and Health (NIOSH), the Center to Protect Workers' Rights--a research arm of the Building and Construction Trades Department, AFL-CIO--has developed and used a "Task-Based Exposure Assessment Model (T-BEAM)" for construction. The characteristic elements of T-BEAM are: (1) an emphasis on the identification, implementation, and evaluation of engineering and work practice controls; and (2) use of experienced, specially trained construction workers (construction safety and health specialists) in the exposure assessment process. A task-based approach was used because tasks, or specialized skills, form the single greatest thread of continuity in the dynamic environment of construction. Workers in the construction industry come from several crafts and are typically employed by a large number of contractors throughout their career. Project types (e.g., residential or industrial rehabilitation) are also highly variable and present unique health risks. Finally, because construction involves building, renovating, or dismantling physical surroundings, the work site is constantly changing. Between 1995 and 1996, T-BEAM was applied to the collection of approximately 200 personal exposure measurements associated with "hot work tasks"--welding and thermal cutting. Data were collected with the assistance of specially trained, journeyman ironworkers, pipe fitters, and boilermakers on nine construction sites located throughout the United States. Portable local exhaust ventilation was provided to participating contractors with the intent of measuring its impact on exposure. Results indicate that data collected in a standardized, systematic fashion from multiple

Quality assurance and ergonomics in the mammography department.

PubMed

Reynolds, April

2014-01-01

Quality assurance (QA) in mammography is a system of checks that helps ensure the proper functioning of imaging equipment and processes. Ergonomics is a scientific approach to arranging the work environment to reduce the risk of work-related injuries while increasing staff productivity and job satisfaction. This article reviews both QA and ergonomics in mammography and explains how they work together to create a safe and healthy environment for radiologic technologists and their patients. QA and quality control requirements in mammography are discussed, along with ergonomic best practices in the mammography setting.

Improving multi-tasking ability through action videogames.

PubMed

Chiappe, Dan; Conger, Mark; Liao, Janet; Caldwell, J Lynn; Vu, Kim-Phuong L

2013-03-01

The present study examined whether action videogames can improve multi-tasking in high workload environments. Two groups with no action videogame experience were pre-tested using the Multi-Attribute Task Battery (MATB). It consists of two primary tasks; tracking and fuel management, and two secondary tasks; systems monitoring and communication. One group served as a control group, while a second played action videogames a minimum of 5 h a week for 10 weeks. Both groups returned for a post-assessment on the MATB. We found the videogame treatment enhanced performance on secondary tasks, without interfering with the primary tasks. Our results demonstrate action videogames can increase people's ability to take on additional tasks by increasing attentional capacity. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Toward a transdisciplinary approach of ergonomic design for sustainability.

PubMed

Di Bucchianico, Giuseppe; Marano, Antonio; Rossi, Emilio

2012-01-01

Starting from the results of a theoretical and methodological study on Ergonomic design for sustainability previously developed from the authors, this paper shows the early results of a study that tries to apply them to actual operational and conceptual apparatuses of Ergonomics. In particular, the research aims to verify the possibility for Ergonomics to initiate an update of its current theoretical and procedural tools, towards new design solutions of "sustainable well-being", trying to look for new declinations of its several fields of application. The paper identifies new paradigms and definitions for one of the central themes of ergonomic design, as well as one among the most established and investigated: the usability of products and services.

A trend analysis of ergonomic research themes in Taiwan.

PubMed

Lin, Chih-Long

2015-01-01

This paper examines the development of ergonomics in Taiwan by analysing 1404 scientific articles published by 113 permanent members of the Ergonomics Society of Taiwan (EST). Each article was classified by key words and abstract content. Each article was also coded by period of publication (1971-1992 (first period), 1993-1997 (second period), 1998-2002 (third period), 2003-2007 (fourth period), and 2008-2012 (fifth period), and against 13 topic categories. The results show that rate of publication has increased by approximately 100 articles every five years since 1993.The most popular topic was ergonomics assessment and analysis techniques in the first period, force exertion-related research in the second period, product design and evaluation in the third period, occupational safety and health in the fourth period and human-computer interface in the fifth period. Each of these is highly relevant to current contemporary issues around the world. Finally, potential areas for future ergonomics research in Taiwan are discussed. This study investigates the trends in academic papers published by members of the EST. Over time, topics have shifted from ergonomics evaluation methods to occupational safety and health, and human–computer interaction. The findings should be considered as important references for planning the future of ergonomics in Taiwan.

Designing the Electronic Classroom: Applying Learning Theory and Ergonomic Design Principles.

ERIC Educational Resources Information Center

Emmons, Mark; Wilkinson, Frances C.

2001-01-01

Applies learning theory and ergonomic principles to the design of effective learning environments for library instruction. Discusses features of electronic classroom ergonomics, including the ergonomics of physical space, environmental factors, and workstations; and includes classroom layouts. (Author/LRW)

Part 1: Participatory Ergonomics Approach to Waste Container Handling Utilizing a Multidisciplinary Team

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zalk, D.M.; Tittiranonda, P.; Burastero, S.

2000-02-07

This multidisciplinary team approach to waste container handling, developed within the Grassroots Ergonomics process, presents participatory ergonomic interpretations of quantitative and qualitative aspects of this process resulting in a peer developed training. The lower back, shoulders, and wrists were identified as frequently injured areas, so these working postures were a primary focus for the creation of the workers' training. Handling procedures were analyzed by the team to identify common cycles involving one 5 gallon (60 pounds), two 5 gallons (60 and 54 pounds), 30 gallon (216 pounds), and 55 gallon (482 pounds) containers: lowering from transporting to/from transport vehicles, loading/unloadingmore » on transport vehicles, and loading onto pallet. Eleven experienced waste container handlers participated in this field analysis. Ergonomic exposure assessment tools measuring these field activities included posture analysis, posture targeting, Lumbar Motion Monitor{trademark} (LMM), and surface electromyography (sEMG) for the erector spinae, infraspinatus, and upper trapezius muscles. Posture analysis indicates that waste container handlers maintained non-neutral lower back postures (flexion, lateral bending, and rotation) for a mean of 51.7% of the time across all activities. The right wrist was in non-neutral postures (radial, ulnar, extension, and flexion) a mean of 30.5% of the time and the left wrist 31.4%. Non-neutral shoulder postures (elevation) were the least common, occurring 17.6% and 14.0% of the time in the right and left shoulders respectively. For training applications, each cycle had its own synchronized posture analysis and posture target diagram. Visual interpretations relating to the peak force modifications of the posture target diagrams proved to be invaluable for the workers' understanding of LMM and sEMG results (refer to Part II). Results were reviewed by the team's field technicians and their interpretations were developed into

Face, content, and construct validity of a novel portable ergonomic simulator for basic laparoscopic skills.

PubMed

Xiao, Dongjuan; Jakimowicz, Jack J; Albayrak, Armagan; Buzink, Sonja N; Botden, Sanne M B I; Goossens, Richard H M

2014-01-01

Laparoscopic skills can be improved effectively through laparoscopic simulation. The purpose of this study was to verify the face and content validity of a new portable Ergonomic Laparoscopic Skills simulator (Ergo-Lap simulator) and assess the construct validity of the Ergo-Lap simulator in 4 basic skills tasks. Four tasks were evaluated: 2 different translocation exercises (a basic bimanual exercise and a challenging single-handed exercise), an exercise involving tissue manipulation under tension, and a needle-handling exercise. Task performance was analyzed according to speed and accuracy. The participants rated the usability and didactic value of each task and the Ergo-Lap simulator along a 5-point Likert scale. Institutional academic medical center with its affiliated general surgery residency. Forty-six participants were allotted into 2 groups: a Novice group (n = 26, <10 clinical laparoscopic procedures) and an Experienced group (n = 20, >50 clinical laparoscopic procedures). The Experienced group completed all tasks in less time than the Novice group did (p < 0.001, Mann-Whitney U test). The Experienced group also completed tasks 1, 2, and 4 with fewer errors than the Novice group did (p < 0.05). Of the Novice participants, 96% considered that the present Ergo-Lap simulator could encourage more frequent practice of laparoscopic skills. In addition, 92% would like to purchase this simulator. All of the experienced participants confirmed that the Ergo-Lap simulator was easy to use and useful for practicing basic laparoscopic skills in an ergonomic manner. Most (95%) of these respondents would recommend this simulator to other surgical trainees. This Ergo-Lap simulator with multiple tasks was rated as a useful training tool that can distinguish between various levels of laparoscopic expertise. The Ergo-Lap simulator is also an inexpensive alternative, which surgical trainees could use to update their skills in the skills laboratory, at home, or in the office

Musculoskeletal symptoms and ergonomic hazards among material handlers in grocery retail industries

NASA Astrophysics Data System (ADS)

Nasrull Abdol Rahman, Mohd; Zuhaidi, Muhammad Fareez Ahmad

2017-08-01

Grocery retail work can be physically demanding as material handler’s tasks involve manual lifting, lowering, carrying, pushing and pulling loads. The nature of this work puts them at a risk for serious low back pain, shoulder pain and other musculoskeletal injuries. This study was conducted by using two different types of tools which were Nordic Musculoskeletal Questionnaire (NMQ) as a survey and Washington Industrial Safety and Health Act (WISHA) Checklist as a direct observation method. Among 46 males and 14 females material handlers were involved throughout this study. For NMQ, the highest body part trouble in the last 12 months was low back pain (88.3%), followed by upper back (68.3%), neck (55.3%) and shoulder (36.7%). While for WISHA Checklist, most of them experienced hazard level involving awkward posture and high hand force. From the research conducted, musculoskeletal disorders (MSDs) and ergonomic risk factors (ERFs) do related as it showed that musculoskeletal disorders may arise if the workers ignored the safety in ergonomic hazards.

Job Tasks as Determinants of Thoracic Aerosol Exposure in the Cement Production Industry.

PubMed

Notø, Hilde; Nordby, Karl-Christian; Skare, Øivind; Eduard, Wijnand

2017-12-15

The aims of this study were to identify important determinants and investigate the variance components of thoracic aerosol exposure for the workers in the production departments of European cement plants. Personal thoracic aerosol measurements and questionnaire information (Notø et al., 2015) were the basis for this study. Determinants categorized in three levels were selected to describe the exposure relationships separately for the job types production, cleaning, maintenance, foreman, administration, laboratory, and other jobs by linear mixed models. The influence of plant and job determinants on variance components were explored separately and also combined in full models (plant&job) against models with no determinants (null). The best mixed models (best) describing the exposure for each job type were selected by the lowest Akaike information criterion (AIC; Akaike, 1974) after running all possible combination of the determinants. Tasks that significantly increased the thoracic aerosol exposure above the mean level for production workers were: packing and shipping, raw meal, cement and filter cleaning, and de-clogging of the cyclones. For maintenance workers, time spent with welding and dismantling before repair work increased the exposure while time with electrical maintenance and oiling decreased the exposure. Administration work decreased the exposure among foremen. A subjective tidiness factor scored by the research team explained up to a 3-fold (cleaners) variation in thoracic aerosol levels. Within-worker (WW) variance contained a major part of the total variance (35-58%) for all job types. Job determinants had little influence on the WW variance (0-4% reduction), some influence on the between-plant (BP) variance (from 5% to 39% reduction for production, maintenance, and other jobs respectively but an 79% increase for foremen) and a substantial influence on the between-worker within-plant variance (30-96% for production, foremen, and other workers). Plant

Perceptual learning of basic visual features remains task specific with Training-Plus-Exposure (TPE) training.

PubMed

Cong, Lin-Juan; Wang, Ru-Jie; Yu, Cong; Zhang, Jun-Yun

2016-01-01

Visual perceptual learning is known to be specific to the trained retinal location, feature, and task. However, location and feature specificity can be eliminated by double-training or TPE training protocols, in which observers receive additional exposure to the transfer location or feature dimension via an irrelevant task besides the primary learning task Here we tested whether these new training protocols could even make learning transfer across different tasks involving discrimination of basic visual features (e.g., orientation and contrast). Observers practiced a near-threshold orientation (or contrast) discrimination task. Following a TPE training protocol, they also received exposure to the transfer task via performing suprathreshold contrast (or orientation) discrimination in alternating blocks of trials in the same sessions. The results showed no evidence for significant learning transfer to the untrained near-threshold contrast (or orientation) discrimination task after discounting the pretest effects and the suprathreshold practice effects. These results thus do not support a hypothetical task-independent component in perceptual learning of basic visual features. They also set the boundary of the new training protocols in their capability to enable learning transfer.

Successful integration of ergonomics into continuous improvement initiatives.

PubMed

Monroe, Kimberly; Fick, Faye; Joshi, Madina

2012-01-01

Process improvement initiatives are receiving renewed attention by large corporations as they attempt to reduce manufacturing costs and stay competitive in the global marketplace. These initiatives include 5S, Six Sigma, and Lean. These programs often take up a large amount of available time and budget resources. More often than not, existing ergonomics processes are considered separate initiatives by upper management and struggle to gain a seat at the table. To effectively maintain their programs, ergonomics program managers need to overcome those obstacles and demonstrate how ergonomics initiatives are a natural fit with continuous improvement philosophies.

Awareness and Knowledge of Ergonomics Among Medical Laboratory Scientists in Nigeria.

PubMed

Oladeinde, B H; Ekejindu, I M; Omoregie, R; Aguh, O D

2015-01-01

Ergonomics awareness helps in its right application and contributes significantly to general wellbeing and safety of worker at workplace. This cross-sectional descriptive study aimed at assessing the level of awareness and knowledge of the science of ergonomics among Medical Laboratory Scientists in Benin City, Nigeria. A total of 106 medical laboratory scientists comprising 64 and 42 in public and private laboratories, respectively, were recruited for this study using systematic random sampling technique. Data were obtained from the study participants using a questionnaire and subsequently analyzed with the statistical software INSTAT(®). Out of 106 study participants, 27 (25.5%) were reported to have heard of the term ergonomics. Awareness was significantly associated with gender (male vs. female: 38.5% [15/39] vs. 17.9% [12/67]; odds ratio = 2.9; 95% confidence interval = 1.2, 7.1;P = 0.02). Awareness of ergonomics was not significantly affected by affiliation (P = 0.18), area of specialization (P = 0.78), post-qualification experience (P = 0.43), and educational qualification (P = 0.23) of the study participants. Irrespective of the affiliation of the participant, only 6 of 27 (22.2%) participants who were aware of ergonomics knew at least a benefit of right application of ergonomics in the laboratory. Knowledge of risk factors for the development of musculoskeletal disorders was reported by 8 of 27 (29.6%) persons who claimed to be aware of ergonomics. Awareness of ergonomics and knowledge of gains of its right application was poor among the study participants. Regular ergonomic education of medical laboratory scientists in Nigeria is advocated.

[Functions of participatory ergonomics programs in reducing work-related musculoskeletal disorders].

PubMed

Guo, M J; Liu, J J; Yao, H Y

2016-08-10

Work-related musculoskeletal disorders (MSDs) are most commonly seen in all the occupational non-fatal injuries and illnesses for workers, especially those who are involved in labor-intensive industries. Participatory ergonomics is frequently used to prevent musculoskeletal disorders. This paper gives an overview of a historical perspective on the use of participatory ergonomics approach in reducing the health effects of labor-intensive industries. Progress, barriers and facilitators on the organization, implementation and evaluation of participatory ergonomics programs are studied. Participatory ergonomics seems a successful method to develop, prioritize measures to prevent MSDs. Participatory ergonomics can help industries reduce musculoskeletal injuries and disorders, improve workplace condition and promote health conditions of the workers.

Evolutionary adaptations: theoretical and practical implications for visual ergonomics.

PubMed

Fostervold, Knut Inge; Watten, Reidulf G; Volden, Frode

2014-01-01

The literature discussing visual ergonomics often mention that human vision is adapted to light emitted by the sun. However, theoretical and practical implications of this viewpoint is seldom discussed or taken into account. The paper discusses some of the main theoretical implications of an evolutionary approach to visual ergonomics. Based on interactional theory and ideas from ecological psychology an evolutionary stress model is proposed as a theoretical framework for future research in ergonomics and human factors. The model stresses the importance of developing work environments that fits with our evolutionary adaptations. In accordance with evolutionary psychology, the environment of evolutionary adaptedness (EEA) and evolutionarily-novel environments (EN) are used as key concepts. Using work with visual display units (VDU) as an example, the paper discusses how this knowledge can be utilized in an ergonomic analysis of risk factors in the work environment. The paper emphasises the importance of incorporating evolutionary theory in the field of ergonomics. Further, the paper encourages scientific practices that further our understanding of any phenomena beyond the borders of traditional proximal explanations.

Nature: a new paradigm for well-being and ergonomics.

PubMed

Richardson, Miles; Maspero, Marta; Golightly, David; Sheffield, David; Staples, Vicki; Lumber, Ryan

2017-02-01

Nature is presented as a new paradigm for ergonomics. As a discipline concerned with well-being, the importance of natural environments for wellness should be part of ergonomics knowledge and practice. This position is supported by providing a concise summary of the evidence of the value of the natural environment to well-being. Further, an emerging body of research has found relationships between well-being and a connection to nature, a concept that reveals the integrative character of human experience which can inform wider practice and epistemology in ergonomics. Practitioners are encouraged to bring nature into the workplace, so that ergonomics keeps pace with the move to nature-based solutions, but also as a necessity in the current ecological and social context. Practitioner Summary: Nature-based solutions are coming to the fore to address societal challenges such as well-being. As ergonomics is concerned with well-being, there is a need for a paradigm shift in the discipline. This position is supported by providing a concise summary of the evidence of the value of the natural environment to well-being.

The FITS model office ergonomics program: a model for best practice.

PubMed

Chim, Justine M Y

2014-01-01

An effective office ergonomics program can predict positive results in reducing musculoskeletal injury rates, enhancing productivity, and improving staff well-being and job satisfaction. Its objective is to provide a systematic solution to manage the potential risk of musculoskeletal disorders among computer users in an office setting. A FITS Model office ergonomics program is developed. The FITS Model Office Ergonomics Program has been developed which draws on the legislative requirements for promoting the health and safety of workers using computers for extended periods as well as previous research findings. The Model is developed according to the practical industrial knowledge in ergonomics, occupational health and safety management, and human resources management in Hong Kong and overseas. This paper proposes a comprehensive office ergonomics program, the FITS Model, which considers (1) Furniture Evaluation and Selection; (2) Individual Workstation Assessment; (3) Training and Education; (4) Stretching Exercises and Rest Break as elements of an effective program. An experienced ergonomics practitioner should be included in the program design and implementation. Through the FITS Model Office Ergonomics Program, the risk of musculoskeletal disorders among computer users can be eliminated or minimized, and workplace health and safety and employees' wellness enhanced.

Ergonomic considerations in school environments - the need for widening the scope.

PubMed

Jayaratne, Kapila

2012-01-01

Behaviour patterns specific to children pose them at greater risk of environmental hazards than adults. Ergonomics is the science of matching human interaction with the proximate environment. Conventionally ergonomic principles were applied on adult work places to ensure safety of the working environment. With emerging scientific evidence, school environments are being a focus to apply ergonomic principles. Children spend more time within schools during critical developmental stages of their life. Everybody feels that the schools are safe places, but they are not. A multitude of ergonomic hazards have been identified in school settings. Widespread mismatches between anthropometry and school furniture, heavy schoolbag carriage and unhealthy bag behaviour are significant. Negative effects range from general tiredness, musculoskeletal pains, spinal deviations, shoulder level shifts, injuries and psychological disturbances. There are fragmented efforts to widen ergonomic concepts to health care professionals and other stakeholders of child health. Addressing ergonomic issues will ensure that children, the future productive generation contributing to economic growth and development of a country, are provided with opportunities in a healthy environment. This paper emphasizes the need for a concerted effort on widening the scope of ergonomics to cater for the evolving demand.

Ergonomic design and evaluation of the handle for an endoscopic dissector.

PubMed

Shimomura, Yoshihiro; Minowa, Keita; Kawahira, Hiroshi; Katsuura, Tetsuo

2016-05-01

The purpose of this study was to design an endoscopic dissector handle and objectively assess its usability. The handles were designed with increased contact area between the fingers and thumb and the eye rings, and the eye rings were modified to have a more perpendicular insertion angle to the finger midline. Four different handle models were compared, including a conventional product. Subjects performed dissection, exclusion, grasping, precision manipulation and precision handling tasks. Electromyography and subjective evaluations were measured. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability. The activity of the first dorsal interosseous muscle was sometimes influenced by the shape of the other parts. The ergonomically designed endoscopic dissector handle used in this study achieved high usability. Medical instrument designs based on ergonomic concepts should be assessed with objective indices. Practitioner Summary: The endoscopic dissector handles were designed with increased contact area and more suitable insertion angle between the fingers and thumb and the eye rings. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability.

Workplace ergonomics in lean production environments: A literature review.

PubMed

Arezes, Pedro M; Dinis-Carvalho, José; Alves, Anabela Carvalho

2015-01-01

Lean Production Systems (LPS) have become very popular among manufacturing industries, services and large commercial areas. A LPS must develop and consider a set of work features to bring compatibility with workplace ergonomics, namely at a muscular, cognitive and emotional demands level. Identify the most relevant impacts of the adoption of LPS from the ergonomics point of view and summarizes some possible drawbacks for workplace ergonomics due to a flawed application of the LPS. The impacts identified are focused in four dimensions: work pace, intensity and load; worker motivation, satisfaction and stress; autonomy and participation; and health outcome. This paper also discusses the influence that the work organization model has on workplace ergonomics and on the waste elimination previewed by LPS. Literature review focused LPS and its impact on occupational ergonomics conditions, as well as on the Health and Safety of workers. The main focus of this research is on LPS implementations in industrial environments and mainly in manufacturing industry workplaces. This is followed by a discussion including the authors' experience (and previous research). From the reviewed literature it seems that there is no consensus on how Lean principles affect the workplace ergonomics since most authors found positive (advantages) and negative (disadvantages) impacts. The negative impacts or disadvantages of LPS implementations reviewed may result from the misunderstanding of the Lean principles. Possibly, they also happen due to partial Lean implementations (when only one or two tools were implemented) that may be effective in a specific work context but not suitable to all possible situations as the principles of LPS should not lead, by definition, to any of the reported drawbacks in terms of workplace ergonomics.

The ergonomic process of an automotive company in Brazil: a study case.

PubMed

Bustos, Carolina; Fischer, Daniela; Ballardin, Lucimara; Nielsen, Rudolf

2012-01-01

The goal of this paper is to present the ergonomic process of an automotive company, whose focus is on the adaptation of the work conditions to the psychophysiological characteristics of its employees. The planning and the development of the ergonomic actions took place in three distinctive stages: ergonomic analysis of the work post (stage 1), ergonomic adaptations (stage 2) and Ergonomic Committee (stage 3). The activities started in June 2006 and have lasted to the current date, keeping a permanent improving process. The procedure adopted was based on the ergonomic analysis methodology proposed by Wisner (1994:1997) and the stages of the Ergonomic Analysis of Work presented in the 17 NR Regulatory Manual (MET, 2002). The paper's approach focused on the voluntary participation of workers from different areas and different hierarchical levels of the organization throughout all the stages of the process. The methodological procedures included descriptive research techniques, exploratory and qualitative research criteria, background and guidelines available in literature and legislation, as well as company information. Among the main results it can be mentioned the satisfaction of the employees regarding the appropriate work conditions, cultural and organizational changes and the creation of an Ergonomic Committee in the company.

An ergonomic evaluation of manual Cleco plier designs: effects of rubber grip, spring recoil, and worksurface angle.

PubMed

You, Heecheon; Kumar, Anil; Young, Ronda; Veluswamy, Prabaharan; Malzahn, Don E

2005-09-01

The present study evaluated two design modifications (rubber grip and torsion spring) to the conventional manual Cleco pliers by electromyography (EMG), hand discomfort, and design satisfaction. This study also surveyed workers' satisfaction with selected design features of the pliers for ergonomic improvement. A two-way (plier design x worksurface angle) within-subject (nested within gender and hand size) design was employed. Eleven workers simulated the plier task in an adjustable workstation for different plier designs and worksurface angles (0 degrees , 60 degrees , and 90 degrees ). Lower EMG values were obtained for the pliers with rubber grip and at 60 degrees of worksurface angle. EMG values varied significantly between the participants, but showed low correlations (Spearman's rank correlation = -0.27 approximately -0.58) with their work experience with the pliers. The hand discomfort and design satisfaction evaluations identified that the grip span (max = 14.0 cm) and grip force requirement (peak = 220.5 N) of the current pliers need ergonomic modification. The present study shows the needs of both the ergonomic design of a hand tool and the training of a proper work method to control work-related musculoskeletal disorders at the workplace.

Implementation of ergonomics in a service unit: challenges and advances.

PubMed

Penteado, Eliane Villas Bôas de Freitas; de França, Maria Goretti; Ramalhoto, Ana Maria de Brito; de Oliveira, Ana Maria; Machado, Bruno Rangel Cortoppassi; Genipapeiro, Joana Angélica Matos

2012-01-01

This article discusses the implementation of ergonomics in a service unit of a major company in the energy sector. From the perspective of management, it analyses the process of implementation of ergonomics programmes in four operational areas. The objective was to diagnose the level of implementation of ergonomics. The study is descriptive, undertaken through the interaction with the technical staff of the operational areas involved, incorporating the perception of these role players concerning their work routines. The results indicated significant differences in the level of implementation of the programmes, especially those concerning structural conditions. Important conquests were registered, such as the investment in the training of specialists, the establishment of a facilitator network and the improvement of the standard for the directioning and alignment of the execution of initiatives. The linking in of the programmes with those of occupational health management emphasises its contribution to the safety and well-being of the workforce through interventions aimed mainly at eliminating and reducing ergonomic biomechanical risks. However, the need to broaden and deepen the ergonomic approach regarding organizational and cognitive aspects, as well as the insertion of ergonomics in project design of new work spaces and processes were also identified.

Ergonomic Evaluations of Microgravity Workstations

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; Berman, Andrea H.; Byerly, Diane

1996-01-01

Various gloveboxes (GBXs) have been used aboard the Shuttle and ISS. Though the overall technical specifications are similar, each GBX's crew interface is unique. JSC conducted a series of ergonomic evaluations of the various glovebox designs to identify human factors requirements for new designs to provide operator commonality across different designs. We conducted 2 0g evaluations aboard the Shuttle to evaluate the material sciences GBX and the General Purpose Workstation (GPWS), and a KC-135 evaluation to compare combinations of arm hole interfaces and foot restraints (flexible arm holes were better than rigid ports for repetitive fine manipulation tasks). Posture analysis revealed that the smallest and tallest subjects assumed similar postures at all four configurations, suggesting that problematic postures are not necessarily a function of the operator s height but a function of the task characteristics. There was concern that the subjects were using the restrictive nature of the GBX s cuffs as an upper-body restraint to achieve such high forces, which might lead to neck/shoulder discomfort. EMG data revealed more consistent muscle performance at the GBX; the variability in the EMG profiles observed at the GPWS was attributed to the subjects attempts to provide more stabilization for themselves in the loose, flexible gauntlets. Tests revealed that the GBX should be designed for a 95 percentile American male to accommodate a neutral working posture. In addition, the foot restraint with knee support appeared beneficial for GBX operations. Crew comments were to provide 2 foot restraint mechanical modes, loose and lock-down, to accommodate a wide range of tasks without egressing the restraint system. Thus far, we have developed preliminary design guidelines for GBXs and foot.

AORN Ergonomic Tool 6: lifting and carrying supplies and equipment in the perioperative setting.

PubMed

Waters, Thomas; Baptiste, Andrea; Short, Manon; Plante-Mallon, Lori; Nelson, Audrey

2011-08-01

Perioperative team members often are required to lift and carry heavy supplies and equipment into and around the OR; this includes lifting equipment such as hand tables, fluoroscopy boards, stirrups, Wilson frames, irrigation containers for lithotripsy, and heavy instrument pans. Lifting heavy objects creates considerable risk for musculoskeletal injuries to the back and shoulders. AORN Ergonomic Tool 6: Lifting and Carrying Supplies and Equipment in the Perioperative Setting can help caregivers evaluate lifting and carrying tasks and take measures to protect themselves from injury. Caregivers can use the revised National Institute for Occupational Safety and Health lifting equation to assess whether a specific lifting task can be performed safely. Published by Elsevier Inc.

Awareness and Knowledge of Ergonomics Among Medical Laboratory Scientists in Nigeria

PubMed Central

Oladeinde, BH; Ekejindu, IM; Omoregie, R; Aguh, OD

2015-01-01

Background: Ergonomics awareness helps in its right application and contributes significantly to general wellbeing and safety of worker at workplace. Aim: This cross-sectional descriptive study aimed at assessing the level of awareness and knowledge of the science of ergonomics among Medical Laboratory Scientists in Benin City, Nigeria. Subjects and Methods: A total of 106 medical laboratory scientists comprising 64 and 42 in public and private laboratories, respectively, were recruited for this study using systematic random sampling technique. Data were obtained from the study participants using a questionnaire and subsequently analyzed with the statistical software INSTAT®. Results: Out of 106 study participants, 27 (25.5%) were reported to have heard of the term ergonomics. Awareness was significantly associated with gender (male vs. female: 38.5% [15/39] vs. 17.9% [12/67]; odds ratio = 2.9; 95% confidence interval = 1.2, 7.1;P = 0.02). Awareness of ergonomics was not significantly affected by affiliation (P = 0.18), area of specialization (P = 0.78), post-qualification experience (P = 0.43), and educational qualification (P = 0.23) of the study participants. Irrespective of the affiliation of the participant, only 6 of 27 (22.2%) participants who were aware of ergonomics knew at least a benefit of right application of ergonomics in the laboratory. Knowledge of risk factors for the development of musculoskeletal disorders was reported by 8 of 27 (29.6%) persons who claimed to be aware of ergonomics. Conclusions: Awareness of ergonomics and knowledge of gains of its right application was poor among the study participants. Regular ergonomic education of medical laboratory scientists in Nigeria is advocated. PMID:27057381

Reducing musculoskeletal discomfort: effects of an office ergonomics workplace and training intervention.

PubMed

Robertson, Michelle M; O'Neill, Michael J

2003-01-01

Effects of an office ergonomics workplace and training intervention on workers' knowledge and self-reported musculoskeletal pain and discomfort were investigated. An instructional systems design process was used to develop an office ergonomics training program and the evaluation tools used to measure the effectiveness of the training program on workers' office ergonomics knowledge and skills. It was hypothesized that the training and workplace intervention would allow the worker to more effectively use their workplace through increased office ergonomics knowledge and skills. Following the intervention, there was a significant increase in workers' office ergonomics knowledge and awareness. Self-reported work-related musculoskeletal disorders significantly decreased for the group who had a workplace change and received ergonomic training relative to a workplace change-only group and a no intervention control group.

Do ergonomics improvements increase computer workers' productivity?: an intervention study in a call centre.

PubMed

Smith, Michael J; Bayehi, Antoinette Derjani

2003-01-15

This paper examines whether improving physical ergonomics working conditions affects worker productivity in a call centre with computer-intensive work. A field study was conducted at a catalogue retail service organization to explore the impact of ergonomics improvements on worker production. There were three levels of ergonomics interventions, each adding incrementally to the previous one. The first level was ergonomics training for all computer users accompanied by workstation ergonomics analysis leading to specific customized adjustments to better fit each worker (Group C). The second level added specific workstation accessories to improve the worker fit if the ergonomics analysis indicated a need for them (Group B). The third level met Group B requirements plus an improved chair (Group A). Productivity data was gathered from 72 volunteer participants who received ergonomics improvements to their workstations and 370 control subjects working in the same departments. Daily company records of production outputs for each worker were taken before ergonomics intervention (baseline) and 12 months after ergonomics intervention. Productivity improvement from baseline to 12 months post-intervention was examined across all ergonomics conditions combined, and also compared to the control group. The findings showed that worker performance increased for 50% of the ergonomics improvement participants and decreased for 50%. Overall, there was a 4.87% output increase for the ergonomics improvement group as compared to a 3.46% output decrease for the control group. The level of productivity increase varied by the type of the ergonomics improvements with Group C showing the best improvement (9.43%). Even though the average production improved, caution must be used in interpreting the findings since the ergonomics interventions were not successful for one-half of the participants.

International Ergonomics Association Activities and Constituent Societies

DTIC Science & Technology

1988-05-01

science, home economics, psychology and social science. The research papers presented at the annual meeting reflect this broad range of interests...of health of the Polish population, general problems of social and human development, as well as ergonomic issues in architecture, design, and the...Ergonomics Society C. N. Ong Department of Social Medicine and Public Health National University of Singapore Lower Kent Ridge Road Singapore 0511

The ergonomics/human factors approach to health sciences libraries.

PubMed Central

Bube, J L

1985-01-01

A review of the literature reveals scant information on the application of ergonomics to health sciences libraries. Ergonomics research has identified and validated many genuine health hazards in business offices and industrial settings. While appearing innocuous, the library environment is affected by these hazards. As sophisticated technology and machinery are introduced into libraries, the human factors must be considered. This paper examines the hazards of the library environment as identified through ergonomics research and makes recommendations for alleviating or eliminating these dangers. PMID:3161572

A simple ergonomic measure reduces fluoroscopy time during ERCP: A multivariate analysis.

PubMed

Jowhari, Fahd; Hopman, Wilma M; Hookey, Lawrence

2017-03-01

Background and study aims  Endoscopic retrograde cholangiopancreatgraphy (ERCP) carries a radiation risk to patients undergoing the procedure and the team performing it. Fluoroscopy time (FT) has been shown to have a linear relationship with radiation exposure during ERCP. Recent modifications to our ERCP suite design were felt to impact fluoroscopy time and ergonomics. This multivariate analysis was therefore undertaken to investigate these effects, and to identify and validate various clinical, procedural and ergonomic factors influencing the total fluoroscopy time during ERCP. This would better assist clinicians with predicting prolonged fluoroscopic durations and to undertake relevant precautions accordingly. Patients and methods  A retrospective analysis of 299 ERCPs performed by 4 endoscopists over an 18-month period, at a single tertiary care center was conducted. All inpatients/outpatients (121 males, 178 females) undergoing ERCP for any clinical indication from January 2012 to June 2013 in the chosen ERCP suite were included in the study. Various predetermined clinical, procedural and ergonomic factors were obtained via chart review. Univariate analyses identified factors to be included in the multivariate regression model with FT as the dependent variable. Results  Bringing the endoscopy and fluoroscopy screens next to each other was associated with a significantly lesser FT than when the screens were separated further (-1.4 min, P  = 0.026). Other significant factors associated with a prolonged FT included having a prior ERCP (+ 1.4 min, P  = 0.031), and more difficult procedures (+ 4.2 min for each level of difficulty, P  < 0.001). ERCPs performed by high-volume endoscopists used lesser FT vs. low-volume endoscopists (-1.82, P = 0.015). Conclusions  Our study has identified and validated various factors that affect the total fluoroscopy time during ERCP. This is the first study to show that decreasing the distance

Perceptual learning of basic visual features remains task specific with Training-Plus-Exposure (TPE) training

PubMed Central

Cong, Lin-Juan; Wang, Ru-Jie; Yu, Cong; Zhang, Jun-Yun

2016-01-01

Visual perceptual learning is known to be specific to the trained retinal location, feature, and task. However, location and feature specificity can be eliminated by double-training or TPE training protocols, in which observers receive additional exposure to the transfer location or feature dimension via an irrelevant task besides the primary learning task Here we tested whether these new training protocols could even make learning transfer across different tasks involving discrimination of basic visual features (e.g., orientation and contrast). Observers practiced a near-threshold orientation (or contrast) discrimination task. Following a TPE training protocol, they also received exposure to the transfer task via performing suprathreshold contrast (or orientation) discrimination in alternating blocks of trials in the same sessions. The results showed no evidence for significant learning transfer to the untrained near-threshold contrast (or orientation) discrimination task after discounting the pretest effects and the suprathreshold practice effects. These results thus do not support a hypothetical task-independent component in perceptual learning of basic visual features. They also set the boundary of the new training protocols in their capability to enable learning transfer. PMID:26873777

Ergonomics research methods

NASA Technical Reports Server (NTRS)

Uspenskiy, S. I.; Yermakova, S. V.; Chaynova, L. D.; Mitkin, A. A.; Gushcheva, T. M.; Strelkov, Y. K.; Tsvetkova, N. F.

1973-01-01

Various factors used in ergonomic research are given. They are: (1) anthrometric measurement, (2) polyeffector method of assessing the functional state of man, (3) galvanic skin reaction, (4) pneumography, (5) electromyography, (6) electrooculography, and (7) tachestoscopy. A brief summary is given of each factor and includes instrumentation and results.

Occupational ergonomics in space

NASA Technical Reports Server (NTRS)

Stramler, J.

1992-01-01

Ergonomics is often defined simply as the study of work. Related or synonymous terms include human factors, human engineering, engineering psychology, and others. Occupational ergonomics is a term that has been proposed to describe the study of the working environment, including the physical consequences resulting from having an improperly designed workplace. The routine space working environment presents some problems not found in the typical Earthbound workplace. These include radiation, intravehicular contamination/pollution, temperature extremes, impact with other objects, limited psychosocial relationships, sensory deprivation, and reduced gravity. These are important workplace considerations, and may affect astronauts either directly at work or at some point during their life as a result of their work under these conditions. Some of the major issues associated with each of these hazards are presented.

Ergonomics Climate Assessment: A measure of operational performance and employee well-being.

PubMed

Hoffmeister, Krista; Gibbons, Alyssa; Schwatka, Natalie; Rosecrance, John

2015-09-01

Ergonomics interventions have the potential to improve operational performance and employee well-being. We introduce a framework for ergonomics climate, the extent to which an organization emphasizes and supports the design and modification of work to maximize both performance and well-being outcomes. We assessed ergonomics climate at a large manufacturing facility twice during a two-year period. When the organization used ergonomics to promote performance and well-being equally, and at a high level, employees reported less work-related pain. A larger discrepancy between measures of operational performance and employee well-being was associated with increased reports of work-related pain. The direction of this discrepancy was not significantly related to work-related pain, such that it didn't matter which facet was valued more. The Ergonomics Climate Assessment can provide companies with a baseline assessment of the overall value placed on ergonomics and help prioritize areas for improving operational performance and employee well-being. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Participatory ergonomics among female cashiers from a department store.

PubMed

Cristancho, María Yanire León

2012-01-01

The objective of this paper was to control ergonomic risks among female cashiers working in a department store belonging to the retail market. This study was conducted between May and November 2010. Participatory ergonomics was applied through knowing and understanding how the company works, establishing the work team (Ergo group), training the team in ergonomics-related topics, and making decisions and interventions. The sample was composed of 71 participants--mostly female cashiers--, and all of them have a musculoskeletal compromise, declaring pain or discomfort mainly in the neck, lower back, right wrist and shoulders. Among others, following problems were found: postural overload, repetitive work, manual load handling, mental fatigue, environmental discomfort, variable work schedules, extended working days, and absence of breaks. In the intervention, the main implemented changes were the redesign of workstation, complete change of chairs and keyboards, and the implementation of a rotation system, as well breaks for compensatory exercises. After that, an evident improvement of found problems was observed, therefore it can be concluded that participatory ergonomics is an attractive methodology, appropriate and efficient for solving and controlling ergonomic risks and problems.

Dust, endotoxin, fungi, and bacteria exposure as determined by work task, season, and type of plant in a flower greenhouse.

PubMed

Thilsing, Trine; Madsen, Anne Mette; Basinas, Ioannis; Schlünssen, Vivi; Tendal, Kira; Bælum, Jesper

2015-03-01

Greenhouse workers are exposed to dust, endotoxin, fungi, and bacteria potentially causing airway inflammation as well as systemic symptoms. Knowledge about determinants of exposure is a prerequisite for efficient prevention through knowledge-based reduction in exposure. The objective of this study was to assess the occupational exposure in a flower greenhouse and to investigate the impact of work tasks on the intensity and variability in exposure. Seventy-six personal full-shift exposure measurements were performed on 38 employees in a Danish flower greenhouse producing Campanula, Lavandula, Rhipsalideae, and Helleborus. The samples were gravimetrically analysed for inhalable dust. Endotoxin was assessed by the Limulus Amoebocyte Lysate test and culture-based quantification of bacteria and fungi was performed. Information on the performed tasks during sampling was extracted from the greenhouse electronic task logging system. Associations between log-transformed exposure outcomes, season, and work tasks were examined in linear mixed-effects regression with worker identity as random effect. Measured concentrations ranged between 0.04 and 2.41mg m(-3) for inhalable dust and between 0.84 and 1097 EU m(-3) for endotoxin exposure, with the highest mean levels measured during Lavandula and Campanula handling, respectively. Personal exposure to fungi ranged between 1.8×10(2) and 3.4×10(6) colony-forming units (CFU) m(-3) and to bacteria between 1.6×10(1) and 4.2×10(5) CFU m(-3). Exposure to dust, endotoxin, fungi, and bacteria differed between seasons. Packing Lavandula, sticking, potting, and grading Rhipsalideae, and all examined tasks related to Campanula production except sticking increased dust exposure. Endotoxin exposure was increased during sticking Campanula and pinching or packing Rhipsalideae, and fungi exposure was elevated by subtasks performed in the research and development area for Campanula, and by potting, packing/dumping Campanula. Sticking and

Ergonomics, safety, and resilience in the helicopter offshore transportation system of Campos Basin.

PubMed

Gomes, José Orlando; Huber, Gilbert J; Borges, Marcos R S; de Carvalho, Paulo Victor R

2015-01-01

Air transportation of personnel to offshore oil platforms is one of the major hazards of this kind of endeavor. Pilot performance is a key factor in the safety of the transportation system. This study seeks to identify the ergonomic factors present in pilots' activities that may in some way compromise or enhance their performance, the constraints and affordances which they are subject to; and where possible to link these to their associated risk factors. Methodology adopted in this project studies work in its context. It is a merging of Activity Analysis (Guerin et al. 2001) of European tradition with Cognitive Task Analysis (CTA - www.ctaresource.com) articulated with the recent approaches to cognitive systems engineering developed by Professors David Woods and Erik Hollnagel. Fifty-five hours of field interviews provided the input for analysis. Sixteen ergonomic constraints were identified, some cognitive, some physical, all considered relevant by the research subjects and expert advisers. Although the safety record of the personnel transportation system studied is considered acceptable, there is low hanging fruit to be picked which can help improve the system's safety.

A study on the ergonomic assessment in the workplace

NASA Astrophysics Data System (ADS)

Tee, Kian Sek; Low, Eugene; Saim, Hashim; Zakaria, Wan Nurshazwani Wan; Khialdin, Safinaz Binti Mohd; Isa, Hazlita; Awad, M. I.; Soon, Chin Fhong

2017-09-01

Ergonomics has gained attention and take into consideration by the workers in the different fields of works recently. It has given a huge impact on the workers comfort which directly affects the work efficiency and productivity. The workers have claimed to suffer from the painful postures and injuries in their workplace. Musculoskeletal disorders (MSDs) is the most common problem frequently reported by the workers. This problem occurs due to the lack of knowledge and alertness from the workers to the ergonomic in their surroundings. This paper intends to review the approaches and instruments used by the previous works of the researchers in the evaluation of the ergonomics. The two main assessment methods often used for ergonomic evaluation are Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA). Popular devices are Inertial Measurement Units (IMU) and Microsoft Kinect.

Integrating ergonomics into engineering design: the role of objects.

PubMed

Hall-Andersen, Lene Bjerg; Broberg, Ole

2014-05-01

The objective of this study was to explore the role of objects in integrating ergonomic knowledge in engineering design processes. An engineering design case was analyzed using the theoretical concepts of boundary objects and intermediary objects: Boundary objects facilitate collaboration between different knowledge domains, while the aim of an intermediary object is to circulate knowledge and thus produce a distant effect. Adjustable layout drawings served as boundary objects and had a positive impact on the dialog between an ergonomist and designers. An ergonomic guideline document was identified as an intermediary object. However, when the ergonomic guidelines were circulated in the design process, only some of the guidelines were transferred to the design of the sterile processing plant. Based on these findings, recommendations for working with objects in design processes are included. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Using Balanced Scorecard (BSC) approach to improve ergonomics programs.

PubMed

Fernandes, Marcelo Vicente Forestieri

2012-01-01

The purpose of this paper is to propose foundations for a theory of using the Balanced Scorecard (BSC) methodology to improve the strategic view of ergonomics inside the organizations. This approach may help to promote a better understanding of investing on an ergonomic program to obtain good results in quality and production, as well as health maintenance. It is explained the basics of balanced scorecard, and how ergonomists could use this to work with strategic enterprises demand. Implications of this viewpoint for the development of a new methodology for ergonomics strategy views are offered.

Process and implementation of participatory ergonomic interventions: a systematic review.

PubMed

van Eerd, Dwayne; Cole, Donald; Irvin, Emma; Mahood, Quenby; Keown, Kiera; Theberge, Nancy; Village, Judy; St Vincent, Marie; Cullen, Kim

2010-10-01

Participatory ergonomic (PE) interventions may vary in implementation. A systematic review was done to determine the evidence regarding context, barriers and facilitators to the implementation of participatory ergonomic interventions in workplaces. In total, 17 electronic databases were searched. Data on PE process and implementation were extracted from documents meeting content and quality criteria and synthesised. The search yielded 2151 references. Of these, 190 documents were relevant and 52 met content and quality criteria. Different ergonomic teams were described in the documents as were the type, duration and content of ergonomic training. PE interventions tended to focus on physical and work process changes and report positive impacts. Resources, programme support, ergonomic training, organisational training and communication were the most often noted facilitators or barriers. Successful PE interventions require the right people to be involved, appropriate ergonomic training and clear responsibilities. Addressing key facilitators and barriers such as programme support, resources, and communication is paramount. STATEMENT OF RELEVANCE: A recent systematic review has suggested that PE has some effect on reducing symptoms, lost days of work and claims. Systematic reviews of effectiveness provide practitioners with the desire to implement but do not provide clear information about how. This article reviews the literature on process and implementation of PE.

An assessment system for rating scientific journals in the field of ergonomics and human factors.

PubMed

Dul, Jan; Karwowski, Waldemar

2004-05-01

A method for selecting and rating scientific and professional journals representing the discipline of ergonomics and human factors is proposed. The method is based upon the journal list, impact factors and citations provided by the Institute of Scientific Information (ISI), and the journal list published in the Ergonomics Abstracts. Three groups of journals were distinguished. The 'ergonomics journals' focus exclusively on ergonomics and human factors. The 'related journals' focus on other disciplines than ergonomics and human factors, but regularly publish ergonomics/human factors papers. The 'basic journals' focus on other technical, medical or social sciences than ergonomics, but are important for the development of ergonomics/human factors. Journal quality was rated using a maximum of four categories: top quality (A-level), high quality (B-level), good quality (C-level)) and professional (P-level). The above methods were applied to develop the Ergonomics Journal List 2004. A total of 25 'ergonomics journals', 58 'related journals' and 142 'basic journals' were classified.

Prenatal cocaine exposure impairs selective attention: evidence from serial reversal and extradimensional shift tasks.

PubMed

Garavan, H; Morgan, R E; Mactutus, C F; Levitsky, D A; Booze, R M; Strupp, B J

2000-08-01

This study assessed the effects of prenatal cocaine exposure on cognitive functioning, using an intravenous (IV) rodent model that closely mimics the pharmacokinetics seen in humans after smoking or IV injection and that avoids maternal stress and undernutrition. Cocaine-exposed males were significantly impaired on a 3-choice, but not 2-choice, olfactory serial reversal learning task. Both male and female cocaine-exposed rats were significantly impaired on extradimensional shift tasks that required shifting from olfactory to spatial cues; however, they showed no impairment when required to shift from spatial to olfactory cues. In-depth analyses of discrete learning phases implicated deficient selective attention as the basis of impairment in both tasks. These data provide clear evidence that prenatal cocaine exposure produces long-lasting cognitive dysfunction, but they also underscore the specificity of the impairment.

Evaluating the ergonomics of a student learning environment.

PubMed

Rudolf, Michelle; Griffiths, Yolanda

2009-01-01

Ergonomics is a key consideration of a student-learning environment. This paper examines aspects of ergonomics and application to the design of tables in three classrooms at a Midwestern university. Custom tables with power outlets and Internet access via Ethernet data ports were planned for classrooms in 2000 to facilitate a laptop program. However, table height, specifically thigh clearance from the seat to the bottom of the work surface, was not fully considered. The ergonomic analysis of the classrooms by an occupational therapy student led to the implementation of positive changes to the tables. The enhancement of the learning environment influences student comfort and productivity and can offset the cost of renovating the tables.

[Nursing work and ergonomics].

PubMed

Marziale, M H; Robazzi, M L

2000-12-01

This text articulates empirical evidence resulting from scientific work with the intention of providing a reflection about the application of ergonomics as a methodological instrument to support improvement of the labor conditions of nursing personnel in hospitals.

Work Tasks as Determinants of Grain Dust and Microbial Exposure in the Norwegian Grain and Compound Feed Industry.

PubMed

Straumfors, Anne; Heldal, Kari Kulvik; Wouters, Inge M; Eduard, Wijnand

2015-07-01

The grain and compound feed industry entails inevitable risks of exposure to grain dust and its microbial content. The objective of this study was therefore to investigate task-dependent exposure differences in order to create knowledge basis for awareness and exposure reducing measures in the Norwegian grain and compound feed industry. A total of 166 samples of airborne dust were collected by full-shift personal sampling during work in 20 grain elevators and compound feed mills during one autumn season and two winter seasons. The personal exposure to grain dust, endotoxins, β-1→3-glucans, bacteria, and fungal spores was quantified and used as individual outcomes in mixed models with worker nested in company as random effect and different departments and tasks as fixed effects. The exposure levels were highest in grain elevator departments. Exposure to endotoxins was particularly high. Tasks that represented the highest and lowest exposures varied depending on the bioaerosol component. The most important determinants for elevated dust exposure were cleaning and process controlling. Cleaning increased the dust exposure level by a factor of 2.44 of the reference, from 0.65 to 1.58mg m(-3), whereas process controlling increased the dust exposure level by a factor of 2.97, from 0.65 to 1.93mg m(-3). Process controlling was associated with significantly less grain dust exposure in compound feed mills and the combined grain elevators and compound feed mills, than in grain elevators. The exposure was reduced by a factor of 0.18 and 0.22, from 1.93 to 0.34mg m(-3) and to 0.42mg m(-3), respectively, compared with the grain elevators. Inspection/maintenance, cleaning, and grain rotation and emptying were determinants of higher exposure to both endotoxin and β-1→3-glucans. Seed winnowing was in addition a strong determinant for endotoxin, whereas mixing of animal feed implied higher β-1→3-glucan exposure. Cleaning was the only task that contributed significantly to

An ergonomic analysis of work in the process of professional rehabilitation in Brazil.

PubMed

Cabral, A; Souza e Silva, M; Louzada, E; Cesar, W

2012-01-01

The purpose of this study is to describe the use of the Ergonomic Analysis of Work (EAW) in the process of rehabilitating workers, insured by the National Institute of Social Security (INSS) in Brazil, and to conduct a brief analysis of the instrument used by this body. Information obtained from EAW enabled the demand, the requirements of the activity and the skills needed to perform the tasks in the workplace to be determined, thus aiding the decision of the INSS as to rehabilitating the workers and their return to their jobs.

Eletrobras management program in ergonomics: the pursuit of excellence through maturity levels.

PubMed

Pires, Paulo Roberto de Oliveira Bassil; Rezende, Fagner Fagundes

2012-01-01

Ergonomics for Eletrobras arose from the need in having an environment more suitable to the characteristics and circumstances of employees, in compliance with Regulation Standard no. 17 - Ergonomics (NR17) of the Ministry of Labor and Employment. Being a mixed economy company with regionalized anthropometric characteristics of its employees, the study of ergonomic adjustments and improvement of the concept of Ergonomics were and have been of great importance to the company's production environment. These advances have contributed to the development of specific technical criteria for the purchase of furniture and work tools (accessories), apart from their possible effects on the user. Ergonomics has been perceived as a technical-scientific tool, aimed to study labor interactions, new technologies and specific characteristics of the activities performed. To meet these demands a multidisciplinary Ergonomics Committee was created in Eletrobras, and effectively established the Ergonomics Management Program in the company; This program is marked by well-defined phases with great success in making use of these studies for other types of corporate activities and also facilitating the program control and its maturity levels, even at a business level.

Biomechanical investigation of prolonged driving in an ergonomically designed truck seat prototype.

PubMed

Cardoso, Michelle; McKinnon, Colin; Viggiani, Dan; Johnson, Michel J; Callaghan, Jack P; Albert, Wayne J

2018-03-01

A postural evaluation during a prolonged driving task was conducted to determine the ergonomic validity of a new freely adjustable truck seat prototype. Twenty participants were recruited to perform two 2-h simulated driving sessions. Postures were assessed using motion capture, accelerometers and pressure pads. Subjective discomfort was also monitored in 15-min increments using ratings of perceived discomfort (RPD) and the Automotive Seating Discomfort Questionnaire. Participants had a more neutral spine posture during the first hour of the drive and reported lower RPDs while sitting in the prototype. Pairing the gluteal backrest panel with the adjustable seat pan helped reduce the average sitting pressure. The industry-standard truck seat may lead to the development of poor whole body posture, and the proposed ergonomic redesign of a new truck seat helped improve sitting posture and reduce perceived discomfort. Practitioner Summary: A new freely adjustable truck seat prototype was compared to an Industry standard seat to assess hypothesised improvements to sitting posture and discomfort for long haul driving. It was found that the adjustable panels in the prototype helped promote spine posture, reduce sitting pressure and improved discomfort ratings.

A case study detailing key considerations for implementing a telehealth approach to office ergonomics.

PubMed

Ritchie, Catherine L W; Miller, Linda L; Antle, David M

2017-01-01

Telehealth approaches to delivering ergonomics assessment hold great potential to improve service delivery in rural and remote settings. This case study describes a telehealth-based ergonomics service delivery process, and compares in-person and telehealth-based ergonomics approaches at an Alberta-based non-profit advocacy group. This project demonstrates that telehealth approaches to ergonomics do not lead to significantly different scoring outcomes for assessment of ergonomics issues, when compared to in-person assessments. This project also outlines the importance of live real-time video conferencing to improving communication, attaining key assessment information, and demonstrating ergonomic adjustments. However, some key considerations of bandwidth and hardware capabilities need to be taken into account. Key communication strategies are outlined to improve rapport, maintain employee confidentiality, and reduce client anxiety around telehealth ergonomics assessments. This project provides further support for telehealth approaches to office ergonomics, and outlines some key implementation strategies and barriers that should be considered.

AORN Ergonomic Tool 3: lifting and holding the patient's legs, arms, and head while prepping.

PubMed

Waters, Thomas; Spera, Patrice; Petersen, Carol; Nelson, Audrey; Hernandez, Edward; Applegarth, Shawn

2011-05-01

Lifting the arms, legs, or head of a patient while prepping these areas for surgery can exert strong forces on the muscles and joints of the shoulders and backs of perioperative team members who perform this task, which may lead to work-related musculoskeletal disorders. AORN Ergonomic Tool 3: Lifting and Holding the Patient's Legs, Arms, and Head While Prepping provides scientifically based determinations of the amount of weight perioperative personnel can safely lift and hold manually for up to one, two, and three minutes using one hand or both. If these weight limits are exceeded, additional staff members or assistive devices are needed to help with the task. Published by Elsevier Inc.

Effectiveness of computer ergonomics interventions for an engineering company: a program evaluation.

PubMed

Goodman, Glenn; Landis, James; George, Christina; McGuire, Sheila; Shorter, Crystal; Sieminski, Michelle; Wilson, Tamika

2005-01-01

Ergonomic principles at the computer workstation may reduce the occurrence of work related injuries commonly associated with intensive computer use. A program implemented in 2001 by an occupational therapist and a physical therapist utilized these preventative measures with education about ergonomics, individualized evaluations of computer workstations, and recommendations for ergonomic and environmental changes. This study examined program outcomes and perceived effectiveness based on review of documents, interviews, and surveys of the employees and the plant manager. The program was deemed successful as shown by 59% of all therapist recommendations and 74% of ergonomic recommendations being implemented by the company, with an 85% satisfaction rate for the ergonomic interventions and an overall employee satisfaction rate of 70%. Eighty-one percent of the physical problems reported by employees were resolved to their satisfaction one year later. Successful implementation of ergonomics programs depend upon effective communication and education of the consumers, and the support, cooperation and collaboration of management and employees.

Optimizing the physical ergonomics indices for the use of partial pressure suits.

PubMed

Ding, Li; Li, Xianxue; Hedge, Alan; Hu, Huimin; Feathers, David; Qin, Zhifeng; Xiao, Huajun; Xue, Lihao; Zhou, Qianxiang

2015-03-01

This study developed an ergonomic evaluation system for the design of high-altitude partial pressure suits (PPSs). A total of twenty-one Chinese males participated in the experiment which tested three types of ergonomics indices (manipulative mission, operational reach and operational strength) were studied using a three-dimensional video-based motion capture system, a target-pointing board, a hand dynamometer, and a step-tread apparatus. In total, 36 ergonomics indices were evaluated and optimized using regression and fitting analysis. Some indices that were found to be linearly related and redundant were removed from the study. An optimal ergonomics index system was established that can be used to conveniently and quickly evaluate the performance of different pressurized/non-pressurized suit designs. The resulting ergonomics index system will provide a theoretical basis and practical guidance for mission planners, suit designers and engineers to design equipment for human use, and to aid in assessing partial pressure suits. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Human factors and ergonomics assessment of food pantry work: A case study.

PubMed

Higgins, Nicholas A; Talone, Andrew B; Fraulini, Nicholas W; Smither, Janan A

2017-01-01

Research assessing work processes in food pantries has been limited to the client's experience and aspects of food donations [3-5]. Research on food pantries has yet to focus on understanding and evaluating worker-environment interaction. The present case study examined the interaction between workers and their work environment while performing common tasks in a food pantry. Data were collected through naturalistic observations and structured interviews. A task analysis was performed on the data. Several potential issues in the pantry were identified including with the workspace layout, environmental conditions, and signage. Human factors and ergonomics principles were then utilized to provide insights and recommendations (e.g., use of numbered rather than color-coded signage). Recommendations were provided to the case study food pantry for enhancing safety and productivity. Further research is needed to assess the generalizability of our findings to other food pantries.

SME Worker Affective (SWA) index based on environmental ergonomics

NASA Astrophysics Data System (ADS)

Ushada, M.; Kusuma Aji, G.; Okayama, T.; Khidir, M.

2018-04-01

Small-Medium sized (SME) is a focal type of Indonesian industry which contributes to national emerging economies. Indonesian goverment has developed employee social security system (BPJS Ketenagakerjaan) to support worker quality of life. However, there were limited research which could assist BPJS Ketenagakerjaan in evaluating worker quality of life. Worker quality of life could be categorized as the highest worker needs or affective states. SME Worker Affective (SWA) index is being concerned as a basic tool to make balance between worker performance and quality of life in workstation of SMEs. The research objectives are: 1) To optimize the environmental ergonomics in SMEs; 2) To quantify SME Worker Affective (SWA) index based on optimized environmental ergonomics. The research advantage is to support Indonesian goverment in monitoring SMEs good practices to its worker quality of life. Simulated annealing optimized the heart rate and environmental ergonomics parameters. SWA index was determined based on comparison between optimized heart rate and environmental ergonomics parameters. SWA index were quantified for 380 data of worker. The evaluation indicated 51.3% worker in affective and 48.7% in non-affective condition. Research results indicated that stakeholders of SMEs should put more attention on environmental ergonomics and worker affective.

Ergonomics and sustainability in the design of everyday use products.

PubMed

Tosi, Francesca

2012-01-01

The relationship between Ergonomics and Design is a key element in the sustainability project, as well as in many other areas of experimental design. In the Design for Sustainability field, Ergonomics is a strategic factor for design culture innovation, providing designers with the necessary knowledge and skills regarding human characteristics and capabilities, as well as user needs and desires during use and interaction with products in work activities and everyday life. Ergonomics is also a strategic innovative factor in design development and manufacturing processes. In fact, ergonomics provides a methodological approach in user-product interaction evaluation processes through the use of participatory design and survey methods, user trials, direct observation, savings and resource conservation, etc.On the other hand, design offers solutions able to interpret user needs and expectations, at the same time suggesting new behaviors and lifestyles.In Design for Sustainability, the ergonomic and user-centered approach contributes greatly to lifestyles and innovative use of products--making it possible to understand and interpret real people needs and expectations in their everyday actions and behavior.New consumption patterns, new awareness of lifestyles, energy source consumption, purchasing methods and consumption style etc. can be supported by design innovation, responding to expressed and unexpressed user needs. With this in mind, the ergonomic approach represents the starting point for design choices and at the same time, a tool for assessing their appropriateness and effectiveness.

Abuse Pattern of Toluene Exposure Alters Mouse Behavior in a Waiting-for-Reward Operant Task

PubMed Central

Bowen, Scott E.; McDonald, Phillip

2009-01-01

Inhaling solvents for recreational purposes continues to be a world-wide public health concern. Toluene, a volatile solvent in many abused products, adversely affects the central nervous system. However, the long-term neurobehavioral effects of exposure to high-concentration, binge patterns typical of toluene abuse remain understudied. We studied the behavioral effects of repeated toluene exposure on cognitive function following binge toluene exposure on behavioral impulse control in Swiss Webster mice using a “wait-for-reward” operant task. Mice were trained on a fixed-ratio (FR) schedule using sweetened milk as a reward. Upon achieving FR15, a wait component was added which delivered free rewards in the absence of responses at increasing time intervals (2 sec, 4 sec, 6 sec, etc…). Mice continued to receive free rewards until they pressed a lever that reinstated the FR component (FR Reset). Once proficient in the FR-Wait task, mice were exposed to either 1,000 ppm, 3,600 ppm or 6,000 ppm toluene, or 0 ppm (air controls) for 30 min per day for 40 days. To avoid acute effects of toluene exposure, behavior was assessed 23 hours later. Repeated toluene exposure decreased response rates, the number of FR resets, and increased mean wait time, resulting in a higher response-to-reinforcer ratio than exhibited by controls. Mice receiving the higher exposure level (6,000 ppm) showed a dramatic decrease in the number of rewards received, which was reversed when toluene exposure ceased. Mice receiving the lower exposure level (1,000 ppm) showed little change in the number of rewards. These results indicate that repeated binge exposures to high concentrations of toluene can significantly interfere with performance as measured by a waiting-for-reward task, suggesting a significant impact on cognitive and/or psychomotor function. PMID:18832024

A randomised controlled trial on whether a participatory ergonomics intervention could prevent musculoskeletal disorders.

PubMed

Haukka, E; Leino-Arjas, P; Viikari-Juntura, E; Takala, E-P; Malmivaara, A; Hopsu, L; Mutanen, P; Ketola, R; Virtanen, T; Pehkonen, I; Holtari-Leino, M; Nykänen, J; Stenholm, S; Nykyri, E; Riihimäki, H

2008-12-01

To examine the efficacy of a participatory ergonomics intervention in preventing musculoskeletal disorders among kitchen workers. Participatory ergonomics is commonly recommended to reduce musculoskeletal disorders, but evidence for its effectiveness is sparse. A cluster randomised controlled trial among the 504 workers of 119 kitchens in Finland was conducted during 2002-2005. Kitchens were randomised to an intervention (n = 59) and control (n = 60) group. The duration of the intervention that guided the workers to identify strenuous work tasks and to seek solutions for decreasing physical and mental workload, was 11 to 14 months. In total, 402 ergonomic changes were implemented. The main outcome measures were the occurrence of and trouble caused by musculoskeletal pain in seven anatomical sites, local fatigue after work, and sick leave due to musculoskeletal disorders. Individual level data were collected by a questionnaire at baseline and every 3 months during the intervention and 1-year follow-up period. All response rates exceeded 92%. No systematic differences in any outcome variable were found between the intervention and control groups during the intervention or during the 1-year follow-up. The intervention did not reduce perceived physical work load and no evidence was found for the efficacy of the intervention in preventing musculoskeletal disorders among kitchen workers. It may be that a more comprehensive redesign of work organisation and processes is needed, taking more account of workers' physical and mental resources.

The ergonomic relevance of anthropometrical proportions. Part I: body length measures.

PubMed

Küchmeister, Gerd; Behrenbruch, Kay; Ursula, Pieper; Leyk, Dieter

2009-06-01

Anthropometrical findings about proportions of the human body have a long tradition; most of them, however, are rather theoretical. To improve this situation a pragmatic and applicable definition of proportions, normal as well as deviating, is needed. The purpose of this paper is to set up three proportion types for body length measures: leggy-normal-stocky, and their rate in the population of adults in an industrial society (Germany). Based on queries of an actual anthropometrical database metrical limits for these three types are suggested regarding their influence on the most important body length measures in standing and sitting positions. The number of cases with normal proportions is about 60%, leggy and stocky types both reaching up to 20%. The metrical limits are proposed in order to account for differences between those proportion types which are relevant for ergonomics. When solving complex multidimensional design tasks (e.g. workplaces, vehicle interior design, personal equipment) users of anthropometrical data who do not have the opportunity to work with multivariate databases need supplementary information about the proportions of the human body. For this reason such supplementary information concerning proportions is being given here by physiological anthropologists. The application of the findings presented is exemplified in scenarios of ergonomic relevance.

Exposure to bright light modifies HRV responses to mental tasks during nocturnal sleep deprivation.

PubMed

Yokoi, Mari; Aoki, Ken; Shimomura, Yoshihiro; Iwanaga, Koichi; Katsuura, Tetsuo

2006-03-01

This study was intended to determine the effects of continuous bright light exposure on cardiovascular responses, particularly heart rate variability (HRV), at rest and during performance of mental tasks with acute nocturnal sleep deprivation. Eight healthy male subjects stayed awake from 21.00 to 04.30 hours under bright (BL, 2800 lux) or dim (DL, 120 lux) light conditions. During sleep deprivation, mental tasks (Stroop color-word conflict test: CWT) were performed for 15 min each hour. Blood pressure, electrocardiogram, respiratory rate, urinary melatonin concentrations and rectal temperature were measured. During sleep deprivation, BL exposure depressed melatonin secretion in comparison to DL conditions. During sleep deprivation, exposure to BL delayed the decline in heart rate (HR) for 4 h in resting periods. A significant increment of HR induced by each CWT was detected, especially at 03.00 h and later, under DL conditions only. In addition, at 04.00 h, an index of sympathetic activity and sympatho-vagal balance on HRV during CWT increased significantly under DL conditions. In contrast, an index of parasympathetic activity during CWT decreased significantly under DL conditions. However, the indexes of HRV during CWT did not change throughout sleep deprivation under BL conditions. Our results suggest that BL exposure not only delays the nocturnal decrease in HR at rest but also maintains HR and balance of cardiac autonomic modulation to mental tasks during nocturnal sleep deprivation.

Effect of systematic ergonomic hazard identification and control implementation on musculoskeletal disorder and injury risk.

PubMed

Cantley, Linda F; Taiwo, Oyebode A; Galusha, Deron; Barbour, Russell; Slade, Martin D; Tessier-Sherman, Baylah; Cullen, Mark R

2014-01-01

This study aimed to examine the effect of an ergonomic hazard control (HC) initiative, undertaken as part of a company ergonomics standard, on worker injury risk. Using the company's ergonomic hazards database to identify jobs with and without ergonomic HC implementation and linking to individual job and injury histories, injury risk among person-jobs with HC implementation (the HC group) was compared to those without HC (NoHC group) using random coefficient models. Further analysis of the HC group was conducted to determine the effect of additional ergonomic hazards controlled on injury risk. Among 123 jobs at 17 plant locations, 347 ergonomic hazards were quantitatively identified during the study period. HC were implemented for 204 quantified ergonomic hazards in 84 jobs, impacting 10 385 persons (12 967 person-jobs). No HC were implemented for quantified ergonomic hazards in the remaining 39 jobs affecting 4155 persons (5046 person-jobs). Adjusting for age, sex, plant origin, and year to control for any temporal trend in injury risk, the relative risk (RR) for musculoskeletal disorder (MSD) was 0.85 and the RR for any injury or MSD was 0.92 in the HC compared to NoHC group. Among the HC group, each ergonomic hazard controlled was associated with risk reduction for MSD and acute injury outcomes (RR 0.93). Systematic ergonomic HC through participatory ergonomics, as part of a mandatory company ergonomics standard, is associated with MSD and injury risk reduction among workers in jobs with HC implemented.

Ergonomics for Online Searching.

ERIC Educational Resources Information Center

Wright, Carol; Friend, Linda

1992-01-01

Describes factors to be considered in the design of ergonomically correct workstations for online searchers. Topics discussed include visual factors, including lighting; acoustical factors; radiation and visual display terminals (VDTs); screen image characteristics; static electricity; hardware and equipment; workstation configuration; chairs;…

'1966 and all that': Trends and developments in UK ergonomics during the 1960s.

PubMed

Waterson, Patrick; Eason, Ken

2009-11-01

The 1960s represents a key decade in the expansion of ergonomics within the UK. This paper reviews trends and developments that emerged out of the 1960s and compares these with ergonomics research and practice today. The focus in particular is on the expansion of ergonomics as a discipline within industry, as well as more specific topics, such as the emergence of areas of interest, for example, computers and technology, automation and systems ergonomics and consumer ergonomics. The account is illustrated with a detailed timeline of developments, a set of industrial case studies and the contents of important publications during the decade. A key aim of the paper is to provide the opportunity to reflect on the past and the implications this may have for future directions for ergonomics within the UK. The paper provides practitioners with an insight into the development of ergonomics in the UK during one of the most important decades of its history. This is especially relevant given the fact that in 2009 the Ergonomics Society celebrates its 60th anniversary.

Application of a mathematical model for ergonomics in lean manufacturing.

PubMed

Botti, Lucia; Mora, Cristina; Regattieri, Alberto

2017-10-01

The data presented in this article are related to the research article "Integrating ergonomics and lean manufacturing principles in a hybrid assembly line" (Botti et al., 2017) [1]. The results refer to the application of the mathematical model for the design of lean processes in hybrid assembly lines, meeting both the lean principles and the ergonomic requirements for safe assembly work. Data show that the success of a lean strategy is possible when ergonomics of workers is a parameter of the assembly process design.

Development of an ergonomics guideline for the furniture manufacturing industry.

PubMed

Mirka, Gary A

2005-03-01

Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

Effect of systematic ergonomic hazard identification and control implementation on musculoskeletal disorder and injury risk

PubMed Central

Cantley, Linda F; Taiwo, Oyebode A; Galusha, Deron; Barbour, Russell; Slade, Martin D; Tessier-Sherman, Baylah; Cullen, Mark R

2014-01-01

Objectives This study aimed to examine the effect of an ergonomic hazard control (HC) initiative, undertaken as part of a company ergonomics standard, on worker injury risk. Methods Using the company's ergonomic hazards database to identify jobs with and without ergonomic HC implementation and linking to individual job and injury histories, injury risk among person-jobs with HC implementation (the HC group) was compared to those without HC (NoHC group) using random coefficient models. Further analysis of the HC group was conducted to determine the effect of additional ergonomic hazards controlled on injury risk. Results Among 123jobs at 17 plant locations, 347 ergonomic hazards were quantitatively identified during the study period. HC were implemented for 204 quantified ergonomic hazards in 84 jobs, impacting 10 385 persons (12 967 person-jobs). No HC were implemented for quantified ergonomic hazards in the remaining 39 jobs affecting 4155 persons (5046 person-jobs). Adjusting for age, sex, plant origin, and year to control for any temporal trend in injury risk, the relative risk (RR) for musculoskeletal disorder (MSD) was 0.85 and the RR for any injury or MSD was 0.92 in the HC compared to NoHC group. Among the HC group, each ergonomic hazard controlled was associated with risk reduction for MSD and acute injury outcomes (RR 0.93). Conclusion Systematic ergonomic HC through participatory ergonomics, as part of a mandatory company ergonomics standard, is associated with MSD and injury risk reduction among workers in jobs with HC implemented. PMID:24142048

Evaluation of a participatory ergonomic intervention process in kitchen work.

PubMed

Pehkonen, Irmeli; Takala, Esa-Pekka; Ketola, Ritva; Viikari-Juntura, Eira; Leino-Arjas, Päivi; Hopsu, Leila; Virtanen, Tuija; Haukka, Eija; Holtari-Leino, Merja; Nykyri, Elina; Riihimäki, Hilkka

2009-01-01

We evaluated a participatory ergonomic intervention process applied in 59 municipal kitchens. In groups of three to five kitchens, the workers participated in eight workshops, and generated and evaluated solutions to optimize musculoskeletal load in their work. An ergonomist initiated and supported the process. By the end, 402 changes were implemented. Evaluative data were collected using research diaries, questionnaires, and focus group interviews. The intervention model proved feasible and the participatory approach was mostly experienced as motivating. The workers' knowledge and awareness of ergonomics increased, which improved their ability to tackle ergonomic problems by themselves. The changes in ergonomics were perceived to decrease physical load and improve musculoskeletal health. As hindering factors for implementation, lack of time and motivation, and insufficient financial resources were mentioned. In addition, the workers expressed a wish for more support from the management, technical staff, and ergonomists.

Ergonomics: The Forgotten Variable.

ERIC Educational Resources Information Center

Fitterman, L. Jeffrey

This paper describes ergonomics and the need to adapt worksites and technologies for individuals with physical or sensory disabilities. It provides suggestions for how to design an appropriate setup, design considerations, environmental considerations, chairs, monitor height, ambient noise, light, and electricity. Recommendations include: (1)…

Ergonomics in industrially developing countries: a literature review.

PubMed

Huck-Soo, Loo; Richardson, Stanley

2012-12-01

The two final decades of the 20th century saw a significant increase in ergonomics activity (and resulting publications) in industrially developing countries (IDCs). However, a few ergonomics papers from Singapore, for example, were published in 1969 and 1970. This paper reviews developments in ergonomics in industrially developing countries from 1969 relying heavily on published papers although their quality varies considerably. Some criticism of these papers is offered. Most were concerned with the use of work tools, workstation operations, material handling and working environments especially in tropical climates. The similar problems encountered in a variety of countries are discussed, and the importance of low-cost solutions stressed. This study presents an overview of er gonomics research in IDCs. It concentrates on ASEAN countries whilst recognising the valuable work done in other areas.

Building a framework for ergonomic research on laparoscopic instrument handles.

PubMed

Li, Zheng; Wang, Guohui; Tan, Juan; Sun, Xulong; Lin, Hao; Zhu, Shaihong

2016-06-01

Laparoscopic surgery carries the advantage of minimal invasiveness, but ergonomic design of the instruments used has progressed slowly. Previous studies have demonstrated that the handle of laparoscopic instruments is vital for both surgical performance and surgeon's health. This review provides an overview of the sub-discipline of handle ergonomics, including an evaluation framework, objective and subjective assessment systems, data collection and statistical analyses. Furthermore, a framework for ergonomic research on laparoscopic instrument handles is proposed to standardize work on instrument design. Copyright © 2016 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

Preventing Workplace Injuries and Illnesses through Ergonomics. Listening to Our Pain.

ERIC Educational Resources Information Center

Rosskam, Ellen; Baichoo, Pavan

1997-01-01

Ergonomics focuses on the prevention of injuries through proper design of equipment, workstations, and products. The adoption of an ergonomic philosophy in the workplace has demonstrable benefits. (JOW)

Exposure to Blue Light Increases Subsequent Functional Activation of the Prefrontal Cortex During Performance of a Working Memory Task

PubMed Central

Alkozei, Anna; Smith, Ryan; Pisner, Derek A.; Vanuk, John R.; Berryhill, Sarah M.; Fridman, Andrew; Shane, Bradley R.; Knight, Sara A.; Killgore, William D.S.

2016-01-01

Study Objectives: Prolonged exposure to blue wavelength light has been shown to have an alerting effect, and enhances performance on cognitive tasks. A small number of studies have also shown that relatively short exposure to blue light leads to changes in functional brain responses during the period of exposure. The extent to which blue light continues to affect brain functioning during a cognitively challenging task after cessation of longer periods of exposure (i.e., roughly 30 minutes or longer), however, has not been fully investigated. Methods: A total of 35 healthy participants (18 female) were exposed to either blue (469 nm) (n = 17) or amber (578 nm) (n = 18) wavelength light for 30 minutes in a darkened room, followed immediately by functional magnetic resonance imaging (fMRI) while undergoing a working memory task (N-back task). Results: Participants in the blue light condition were faster in their responses on the N-back task and showed increased activation in the dorsolateral (DLPFC) and ventrolateral (VLPFC) prefrontal cortex compared to those in the amber control light condition. Furthermore, greater activation within the VLPFC was correlated with faster N-back response times. Conclusions: This is the first study to suggest that a relatively brief, single exposure to blue light has a subsequent beneficial effect on working memory performance, even after cessation of exposure, and leads to temporarily persisting functional brain changes within prefrontal brain regions associated with executive functions. These findings may have broader implication for using blue-enriched light in a variety of work settings where alertness and quick decision-making are important. Citation: Alkozei A, Smith R, Pisner DA, Vanuk JR, Berryhill SM, Fridman A, Shane BR, Knight SA, Killgore WD. Exposure to blue light increases subsequent functional activation of the prefrontal cortex during performance of a working memory task. SLEEP 2016;39(9):1671–1680. PMID:27253770

Ergonomics as a missing part of sustainability.

PubMed

Pavlovic-Veselinovic, Sonja

2014-01-01

In the last twenty years, terms such as sustainable development, environmental protection, and sustainable design have been widely exploited, often without justification. Does ergonomics have a legitimate need or right to use these terms and to be the part of the process to which they refer? This paper discusses the relationship between ergonomics and the concept of sustainable development and its three elements of sustainability (environmental, social and economic), as the steps ergonomists need to take to secure and strengthen the influence in sustainability topics.

The stage of change approach for implementing ergonomics advice - Translating research into practice.

PubMed

Rothmore, Paul; Aylward, Paul; Oakman, Jodi; Tappin, David; Gray, Jodi; Karnon, Jonathan

2017-03-01

The Stage of Change (SOC) approach has been proposed as a method to improve the implementation of ergonomics advice. However, despite evidence for its efficacy there is little evidence to suggest it has been adopted by ergonomics consultants. This paper investigates barriers and facilitators to the implementation, monitoring and effectiveness of ergonomics advice and the adoption of the SOC approach in a series of focus groups and a subsequent survey of members of the Human Factors Societies of Australia and New Zealand. A proposed SOC assessment tool developed for use by ergonomics practitioners is presented. Findings from this study suggest the limited application of a SOC based approach to work-related musculoskeletal injury prevention by ergonomics practitioners is due to the absence of a suitable tool in the ergonomists' repertoire, the need for training in this approach, and their limited access to relevant research findings. The final translation of the SOC assessment tool into professional ergonomics practice will require accessible demonstration of its real-world usability to practitioners and the training of ergonomics practitioners in its application. Copyright © 2016 Elsevier Ltd. All rights reserved.

Swedish Sonographers' perceptions of ergonomic problems at work and their suggestions for improvement.

PubMed

Gemark Simonsen, Jenny; Gard, Gunvor

2016-09-15

Sonographers' perceptions of ergonomic and work-related pain problems at work have so far mostly been researched in quantitative studies by questionnaires. There is a need of experience-based research to deepen the knowledge about how sonographers perceive ergonomic problems at work. Therefore, the aim of this qualitative study was to describe sonographers' perceptions of ergonomic problems at work, and their suggestions for improvement strategies. Twenty-two female sonographers were individually interviewed regarding different aspects of their physical working environment. Content analysis was applied. The sonographers perceived different ergonomic problems in their working environment, but to offer patient comfort and to obtain the best possible images were often prioritized over working posture. Echocardiography was considered demanding as the examination is performed with little variation in posture. Ergonomic improvements included reducing the manual handling of the transducer, optimizing the adjustability of equipment, and taking the patient's physique and health into account. As some examinations were perceived to be more ergonomically demanding, variation between examinations was suggested, however, this requires broader skills. Sonography, especially echocardiography is ergonomically demanding but the improvement strategies suggested were perceived useful and applicable.

Ergonomics standards and guidelines for computer workstation design and the impact on users' health - a review.

PubMed

Woo, E H C; White, P; Lai, C W K

2016-03-01

This paper presents an overview of global ergonomics standards and guidelines for design of computer workstations, with particular focus on their inconsistency and associated health risk impact. Overall, considerable disagreements were found in the design specifications of computer workstations globally, particularly in relation to the results from previous ergonomics research and the outcomes from current ergonomics standards and guidelines. To cope with the rapid advancement in computer technology, this article provides justifications and suggestions for modifications in the current ergonomics standards and guidelines for the design of computer workstations. Practitioner Summary: A research gap exists in ergonomics standards and guidelines for computer workstations. We explore the validity and generalisability of ergonomics recommendations by comparing previous ergonomics research through to recommendations and outcomes from current ergonomics standards and guidelines.

Ergonomics issues in national identity card for homeland security.

PubMed

Yeow, Paul H P; Yuen, Y Y; Loo, W H

2013-09-01

Ever since the 9/11 terrorist attack, many countries are considering the use of smart national identity card (SNIC) which has the ability to identify terrorists due to its biometric verification function. However, there are many ergonomics issues in the use of SNIC, e.g. card credibility. This research presents a case study survey of Malaysian users. Although most citizens (>96%) own MyKad (Malaysia SNIC), many do not carry it around and use its applications. This defeats one of its main purposes, i.e. combating terrorism. Thus, the research investigates ergonomics issues affecting the citizens' Intention to Use (ITU) MyKad for homeland security by using an extended technology acceptance model. Five hundred questionnaires were collected and analysed using structural equation modelling. Results show that perceived credibility and performance expectancy are the key issues. The findings provide many countries with insights into methods of addressing ergonomics issues and increasing adoption of SNIC for homeland security. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomics Contribution in Maintainability

NASA Astrophysics Data System (ADS)

Teymourian, Kiumars; Seneviratne, Dammika; Galar, Diego

2017-09-01

The objective of this paper is to describe an ergonomics contribution in maintainability. The economical designs, inputs and training helps to increase the maintainability indicators for industrial devices. This analysis can be helpful, among other cases, to compare systems, to achieve a better design regarding maintainability requirements, to improve this maintainability under specific industrial environment and to foresee maintainability problems due to eventual changes in a device operation conditions. With this purpose, this work first introduces the notion of ergonomics and human factors, maintainability and the implementation of assessment of human postures, including some important postures to perform maintenance activities. A simulation approach is used to identify the critical posture of the maintenance personnel and implements the defined postures with minimal loads on the personnel who use the equipment in a practical scenario. The simulation inputs are given to the designers to improve the workplace/equipment in order to high level of maintainability. Finally, the work concludes summarizing the more significant aspects and suggesting future research.

An ergonomics approach model to prevention of occupational musculoskeletal injuries.

PubMed

Koltan, Altan

2009-01-01

The objective of this study was to prevent occupational musculoskeletal injuries. Our workers stacked boxes of ceramics weighing 10-27 kg, making low back pain common in our enterprise. In all the stacking stations, recommended weight limits (RWL) were separately calculated using the revised National Institute for Occupational Health lifting equation. Since the boxes weighed significantly more than the RWL, we developed a new ergonomic design that completely changed the stacking process. The load put on the workers' waist vertebrae in the new and the old stacking methods was compared to evaluate the success of the new ergonomic design, using Newton's third law of motion. Thanks to the new ergonomic design, the load on the workers' vertebrae decreased by 80%. Due to its simple technology and its very low cost compared to robots, the new ergonomic design can be commonly used in enterprises with repeated and constraining stacking.

Facilitators & Barriers to the Adoption of Ergonomic Solutions in Construction

PubMed Central

Dale, Ann Marie; Jaegers, Lisa; Welch, Laura; Barnidge, Ellen; Weaver, Nancy; Evanoff, Bradley A.

2017-01-01

Background Rates of musculoskeletal disorders in construction remain high. Few studies have described barriers and facilitators to the use of available ergonomic solutions. This paper describes these barriers and facilitators and their relationship to the level of adoption. Methods Three analysts rated 16 proposed ergonomic solutions from a participatory ergonomics study and assessed the level of adoption, six adoption characteristics, and identified the category of adoption from a theoretical model. Results Twelve solutions were always or intermittently used and were rated positively for characteristics of relative advantage, compatibility with existing work processes, and trialability. Locus of control (worker vs. contractor) was not related to adoption. Simple solutions faced fewer barriers to adoption than those rated as complex. Conclusions Specific adoption characteristics can help predict the use of new ergonomic solutions in construction. Adoption of complex solutions must involve multiple stakeholders, more time, and shifts in culture or work systems. PMID:28195660

Health Care Ergonomics: Contributions of Thomas Waters.

PubMed

Poole Wilson, Tiffany; Davis, Kermit G

2016-08-01

The aim of this study was to assess the contributions of Thomas Waters's work in the field of health care ergonomics and beyond. Waters's research of safe patient handling with a focus on reducing musculoskeletal disorders (MSDs) in health care workers contributed to current studies and prevention strategies. He worked with several groups to share his research and assist in developing safe patient handling guidelines and curriculum for nursing students and health care workers. The citations of articles that were published by Waters in health care ergonomics were evaluated for quality and themes of conclusions. Quality was assessed using the Mixed Methods Appraisal Tool and centrality to original research rating. Themes were documented by the type of population the citing articles were investigating. In total, 266 articles that referenced the top seven cited articles were evaluated. More than 95% of them were rated either medium or high quality. The important themes of these citing articles were as follows: (a) Safe patient handling is effective in reducing MSDs in health care workers. (b) Shift work has negative impact on nurses. (c) There is no safe way to manually lift a patient. (d) Nurse curriculums should contain safe patient handling. The research of Waters has contributed significantly to the health care ergonomics and beyond. His work, in combination with other pioneers in the field, has generated multiple initiatives, such as a standard safe patient-handling curriculum and safe patient-handling programs. © 2016, Human Factors and Ergonomics Society.

Knowledge, attitude, and practice towards ergonomics among undergraduates of Faculty of Dentistry, Tanta University, Egypt.

PubMed

El-Sallamy, Rania M; Atlam, Salwa A; Kabbash, Ibrahim; El-Fatah, Sanaa Abd; El-Flaky, Asmaa

2017-02-23

Ergonomics is the scientific study of people and their working environment. Dentistry is a profession that generally produces various musculoskeletal disorders. If ergonomic principles are applied in the field of dentistry, it helps to prevent occupational ergonomic health hazards and provides more comfort to the dentist and patient. To assess knowledge, attitudes, and practice of ergonomics during routine dental procedures among undergraduates of Faculty of Dentistry, Tanta University, cross-sectional study was conducted among dental students of Tanta University during the year 2015-2016 using a predesigned selfadministered questionnaire. Knowledge, attitude, and practice were assessed by 16, 5, and 6 questions, respectively. The study included 479 dental students, of them, 291 (60.8%) were females, 359 (74.9%) were from urban areas, and 359 students (74.9%) were 22 years old and below. Only one quarter of the students had good knowledge whereas nearly half of the students (48.9%) had fair knowledge concerning ergonomics. Out of the participants, 84.8% had positive attitudes and 95.4% had poor practice of ergonomics. Only 48.9% of the studied students had fair knowledge regarding ergonomics; also 5% only of students practice it. But about 84.8% of students have a positive attitude towards studying ergonomics. Dental students need to ensure involving ergonomics in the routine dental practice. This may be achieved via addition of ergonomics in their curriculum.

Ergonomic applications to dental practice.

PubMed

Gupta, Shipra

2011-01-01

The term "work-related musculoskeletal disorders (WMSDs)," refers to musculoskeletal disorders to which the work environment contributes significantly, or to musculoskeletal disorders that are made worse or longer lasting by work conditions or workplace risk factors. In recent years, there has been an increase in reporting WMSDs for dental persons. Risk factors of WMSDs with specific reference to dentistry include - stress, poor flexibility, improper positioning, infrequent breaks, repetitive movements, weak postural muscles, prolonged awkward postures and improper adjustment of equipment. Ergonomics is the science of designing jobs, equipment and workplaces to fit workers. Proper ergonomic design is necessary to prevent repetitive strain injuries, which can develop over time and can lead to long-term disability. In this article, 20 strategies to prevent WMSDs in the dental operatory are discussed.

An ergonomic garment design for elderly Turkish men.

PubMed

Civitci, S Sule

2004-05-01

This paper presents an ergonomic garment design for elderly Turkish men. The purpose of this study was to determine elderly men's demands, needs and problems in regard to clothing and to design an ergonomic garment in the light of this knowledge. The sample consisted of 120 elderly men living in Ankara, the capital city of Turkey, and its province. A questionnaire was prepared and given to these people in order to determine their clothing demands and needs. It was established that most of our subjects need functional garments. An ergonomic garment has been designed using the obtained data. It was found that the design of clothing for the elderly requires attention to bodily changes from aging in order to facilitate and raise the quality of life. Specific suggestions are made to elderly people and to the ready-to-wear sector.

The mere exposure effect is differentially sensitive to different judgment tasks.

PubMed

Seamon, J G; McKenna, P A; Binder, N

1998-03-01

The mere exposure effect is the increase in positive affect that results from the repeated exposure to previously novel stimuli. We sought to determine if judgments other than affective preference could reliably produce a mere exposure effect for two-dimensional random shapes. In two experiments, we found that brighter and darker judgments did not differentiate target from distracter shapes, liking judgments led to target selection greater than chance, and disliking judgments led to distracter selection greater than chance. These results for brighter, darker, and liking judgments were obtained regardless of whether shape recognition was greater (Experiment 1) or not greater (Experiment 2) than chance. Effects of prior exposure to novel shapes were reliably observed only for affective judgment tasks. These results are inconsistent with general predictions made by the nonspecific activation hypothesis, but not the affective primacy or perceptual fluency hypotheses which were discussed in terms of cognitive neuroscience research. Copyright 1998 Academic Press.

An effective model for ergonomic optimization applied to a new automotive assembly line

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duraccio, Vincenzo; Elia, Valerio; Forcina, Antonio

2016-06-08

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assemblymore » line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.« less

An effective model for ergonomic optimization applied to a new automotive assembly line

NASA Astrophysics Data System (ADS)

Duraccio, Vincenzo; Elia, Valerio; Forcina, Antonio

2016-06-01

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

The Research of Computer Aided Farm Machinery Designing Method Based on Ergonomics

NASA Astrophysics Data System (ADS)

Gao, Xiyin; Li, Xinling; Song, Qiang; Zheng, Ying

Along with agricultural economy development, the farm machinery product type Increases gradually, the ergonomics question is also getting more and more prominent. The widespread application of computer aided machinery design makes it possible that farm machinery design is intuitive, flexible and convenient. At present, because the developed computer aided ergonomics software has not suitable human body database, which is needed in view of farm machinery design in China, the farm machinery design have deviation in ergonomics analysis. This article puts forward that using the open database interface procedure in CATIA to establish human body database which aims at the farm machinery design, and reading the human body data to ergonomics module of CATIA can product practical application virtual body, using human posture analysis and human activity analysis module to analysis the ergonomics in farm machinery, thus computer aided farm machinery designing method based on engineering can be realized.

Ergonomics as a tool to improve the sustainability of the workforce.

PubMed

Meyer, Felipe; Eweje, Gabriel; Tappin, David

2017-01-01

The sustainability of the workforce is threatened due to working conditions. One of the reasons for this is an imbalance between the working conditions and the capacity of the workers. The objective of the paper, based on a literature review, is to explore the relationship between two main concepts, beginning with sustainability, and finished with ergonomics. Based on that relationship, determine if ergonomics could be helpful to improve the sustainability of the workforce. Literature review was based on two keywords: sustainability and ergonomics. The focus was on create a theoretical path between these two concepts. The literature review draws on 100 journal articles, books, conference proceedings, thesis and reports. The results of the literature review highlights that an ergonomics approach is helpful and appropriate to determine the mismatch between people capacity and system demand. In that sense, the literature review reveals that both disciplines, ergonomics and sustainability, share the same principles and that the mix of both has significant potential. However, the literature also shows a lack of empirical information that proves that potential. The review first posits that sustainability principles could be helpful to improve the working conditions, and second, that an ergonomics approach provides information related with working conditions, organizations' problems and the needs of workers that would be helpful to create a sustainability workforce.

Evidence-based ergonomics: a model and conceptual structure proposal.

PubMed

Silveira, Dierci Marcio

2012-01-01

In Human Factors and Ergonomics Science (HFES), it is difficult to identify what is the best approach to tackle the workplace and systems design problems which needs to be solved, and it has been also advocated as transdisciplinary and multidisciplinary the issue of "How to solve the human factors and ergonomics problems that are identified?". The proposition on this study is to combine the theoretical approach for Sustainability Science, the Taxonomy of the Human Factors and Ergonomics (HFE) discipline and the framework for Evidence-Based Medicine in an attempt to be applied in Human Factors and Ergonomics. Applications of ontologies are known in the field of medical research and computer science. By scrutinizing the key requirements for the HFES structuring of knowledge, it was designed a reference model, First, it was identified the important requirements for HFES Concept structuring, as regarded by Meister. Second, it was developed an evidence-based ergonomics framework as a reference model composed of six levels based on these requirements. Third, it was devised a mapping tool using linguistic resources to translate human work, systems environment and the complexities inherent to their hierarchical relationships to support future development at Level 2 of the reference model and for meeting the two major challenges for HFES, namely, identifying what problems should be addressed in HFE as an Autonomous Science itself and proposing solutions by integrating concepts and methods applied in HFES for those problems.

Evaluation of an ergonomics intervention among Nicaraguan coffee harvesting workers.

PubMed

Bao, Stephen; Silverstein, Barbara; Stewart, Kate

2013-01-01

This study evaluated an ergonomics intervention among Nicaraguan coffee harvesting workers, using electromyography and questionnaire survey techniques. Nicaraguan researchers were involved in the study so that they could gain hands-on experience with ergonomics research and applications, and eventually be the specialists conducting ergonomics interventions in Nicaraguan workplaces. Coffee harvesting activities were studied individually and physical hazards were identified accordingly. The results showed decreased muscle loading on the erector spinae muscle and improved comfort reporting in the back region compared to the commonly used baskets. This fulfils the design objective of a newly developed bag that was used in the intervention to reduce physical workload on the coffee harvesting workers. Workers' opinion survey results showed some issues related to the size of the new bag and the lumbar-shoulder belt mechanism. This information can be used in the modification of the bag in the next design. Key players in the process have been identified. Stimulating ergonomics activities in developing countries is suggested by many experts. This study provided an example from coffee workers in Nicaragua. Commonly used job evaluation procedures and physical load quantification methods were used. Ergonomics researchers and practitioners in developing countries may do similar projects on their own in the future.

Quantification of baseline pupillary response and task-evoked pupillary response during constant and incremental task load.

PubMed

Mosaly, Prithima R; Mazur, Lukasz M; Marks, Lawrence B

2017-10-01

The methods employed to quantify the baseline pupil size and task-evoked pupillary response (TEPR) may affect the overall study results. To test this hypothesis, the objective of this study was to assess variability in baseline pupil size and TEPR during two basic working memory tasks: constant load of 3-letters memorisation-recall (10 trials), and incremental load memorisation-recall (two trials of each load level), using two commonly used methods (1) change from trail/load specific baseline, (2) change from constant baseline. Results indicated that there was a significant shift in baseline between the trails for constant load, and between the load levels for incremental load. The TEPR was independent of shifts in baseline using method 1 only for constant load, and method 2 only for higher levels of incremental load condition. These important findings suggest that the assessment of both the baseline and methods to quantify TEPR are critical in ergonomics application, especially in studies with small number of trials per subject per condition. Practitioner Summary: Quantification of TEPR can be affected by shifts in baseline pupil size that are most likely affected by non-cognitive factors when other external factors are kept constant. Therefore, quantification methods employed to compute both baseline and TEPR are critical in understanding the information processing of humans in practical ergonomics settings.

The Physical Demands and Ergonomics of Working with Young Children.

ERIC Educational Resources Information Center

Gratz, Rene R.; Claffey, Anne; King, Phyllis; Scheuer, Gina

2002-01-01

Examines the physical demands and ergonomic concerns within child care settings. Discusses problem areas and ergonomic recommendations for room design and staff training. Presents important implications for writing job descriptions, determining essential job functions, orienting and training staff, and committing to improving the child care work…

Comparison between magnetic anchoring and guidance system camera-assisted laparoendoscopic single-site surgery nephrectomy and conventional laparoendoscopic single-site surgery nephrectomy in a porcine model: focus on ergonomics and workload profiles.

PubMed

Han, Woong Kyu; Tan, Yung K; Olweny, Ephrem O; Yin, Gang; Liu, Zhuo-Wei; Faddegon, Stephen; Scott, Daniel J; Cadeddu, Jeffrey A

2013-04-01

To compare surgeon-assessed ergonomic and workload demands of magnetic anchoring and guidance system (MAGS) laparoendoscopic single-site surgery (LESS) nephrectomy with conventional LESS nephrectomy in a porcine model. Participants included two expert and five novice surgeons who each performed bilateral LESS nephrectomy in two nonsurvival animals using either the MAGS camera or conventional laparoscope. Task difficulty and workload demands of the surgeon and camera driver were assessed using the validated National Aeronautics and Space Administration Task Load Index (NASA-TLX) questionnaire. Surgeons were also asked to score 6 parameters on a Likert scale (range 1=low/easy to 5=high/hard): procedure-associated workload, ergonomics, technical challenge, visualization, accidental events, and instrument handling. Each step of the nephrectomy was also timed and instrument clashing was quantified. Scores for each parameter on the Likert scale were significantly lower for MAGS-LESS nephrectomy. Mean number of internal and external clashes were significantly lower for the MAGS camera (p<0.001). Mean task times for each procedure were shorter for experts than for novices, but this was not statistically significant. NASA-TLX workload ratings by the surgeon and camera driver showed that MAGS resulted in a significantly lower workload than the conventional laparoscope during LESS nephrectomy (p<0.05). The use of the MAGS camera during LESS nephrectomy lowers the task workload for both the surgeon and camera driver when compared to conventional laparoscope use. Subjectively, it appears to also improve surgeons' impressions of ergonomics and technical challenge. Pending approval for clinical use, further evaluation in the clinical setting is warranted.

ERGONOMICS ABSTRACTS 48983-49619.

ERIC Educational Resources Information Center

Ministry of Technology, London (England). Warren Spring Lab.

THE LITERATURE OF ERGONOMICS, OR BIOTECHNOLOGY, IS CLASSIFIED INTO 15 AREAS--METHODS, SYSTEMS OF MEN AND MACHINES, VISUAL AND AUDITORY AND OTHER INPUTS AND PROCESSES, INPUT CHANNELS, BODY MEASUREMENTS, DESIGN OF CONTROLS AND INTEGRATION WITH DISPLAYS, LAYOUT OF PANELS AND CONSOLES, DESIGN OF WORK SPACE, CLOTHING AND PERSONAL EQUIPMENT, SPECIAL…

An ergonomic evaluation comparing desktop, notebook, and subnotebook computers.

PubMed

Szeto, Grace P; Lee, Raymond

2002-04-01

To evaluate and compare the postures and movements of the cervical and upper thoracic spine, the typing performance, and workstation ergonomic factors when using a desktop, notebook, and subnotebook computers. Repeated-measures design. A motion analysis laboratory with an electromagnetic tracking device. A convenience sample of 21 university students between ages 20 and 24 years with no history of neck or shoulder discomfort. Each subject performed a standardized typing task by using each of the 3 computers. Measurements during the typing task were taken at set intervals. Cervical and thoracic spines adopted a more flexed posture in using the smaller-sized computers. There were significantly greater neck movements in using desktop computers when compared with the notebook and subnotebook computers. The viewing distances adopted by the subjects decreased as the computer size decreased. Typing performance and subjective rating of difficulty in using the keyboards were also significantly different among the 3 types of computers. Computer users need to consider the posture of the spine and potential risk of developing musculoskeletal discomfort in choosing computers. Copyright 2002 by the American Congress of Rehabilitation Medicine and the American Academy of Physical Medicine and Rehabilitation

Ergonomics and quality management--humans in interaction with technology, work environment, and organization.

PubMed

Eklund, J A

1999-01-01

In many studies, ergonomics has been shown to influence human performance. The aim of this paper was to demonstrate important ergonomics influences on quality in industrial production, from the perspective of interactions between humans, technology, organization, and work environment. A second aim was to elaborate on the implications of these findings for the development of quality management strategies. This paper shows that ergonomics problems in terms of adverse work environmental conditions, inappropriate design of technology, and an unsuitable organization are important causes of quality deficiencies. Problem solving aimed at improving ergonomics, quality, and productivity simultaneously is likely to obtain support from most of the interest parties of the company, and may also enhance participation. Ergonomics has the potential of becoming a driving force for the development of new quality management strategies.

Designing an Ergonomically Correct CNC Workstation on a Shoe String Budget.

ERIC Educational Resources Information Center

Lightner, Stan

2001-01-01

Describes research to design and construct ergonomically correct work stations for Computer Numerical Control machine tools. By designing ergonomically correct work stations, industrial technology teachers help protect students from repetitive motion injuries. (Contains 12 references.) (JOW)

Exposure to Blue Light Increases Subsequent Functional Activation of the Prefrontal Cortex During Performance of a Working Memory Task.

PubMed

Alkozei, Anna; Smith, Ryan; Pisner, Derek A; Vanuk, John R; Berryhill, Sarah M; Fridman, Andrew; Shane, Bradley R; Knight, Sara A; Killgore, William D S

2016-09-01

Prolonged exposure to blue wavelength light has been shown to have an alerting effect, and enhances performance on cognitive tasks. A small number of studies have also shown that relatively short exposure to blue light leads to changes in functional brain responses during the period of exposure. The extent to which blue light continues to affect brain functioning during a cognitively challenging task after cessation of longer periods of exposure (i.e., roughly 30 minutes or longer), however, has not been fully investigated. A total of 35 healthy participants (18 female) were exposed to either blue (469 nm) (n = 17) or amber (578 nm) (n = 18) wavelength light for 30 minutes in a darkened room, followed immediately by functional magnetic resonance imaging (fMRI) while undergoing a working memory task (N-back task). Participants in the blue light condition were faster in their responses on the N-back task and showed increased activation in the dorsolateral (DLPFC) and ventrolateral (VLPFC) prefrontal cortex compared to those in the amber control light condition. Furthermore, greater activation within the VLPFC was correlated with faster N-back response times. This is the first study to suggest that a relatively brief, single exposure to blue light has a subsequent beneficial effect on working memory performance, even after cessation of exposure, and leads to temporarily persisting functional brain changes within prefrontal brain regions associated with executive functions. These findings may have broader implication for using blue-enriched light in a variety of work settings where alertness and quick decision-making are important. © 2016 Associated Professional Sleep Societies, LLC.

Expert assessment of physical ergonomics at video-display unit workstations: repeatability, validity and responsiveness to changes.

PubMed

Ketola, Ritva; Toivonen, Risto; Luukkonen, Ritva; Takala, Esa-Pekka; Viikari-Juntura, Eira

2004-08-01

Inter-observer repeatability, validity and responsiveness to change were determined for an expert assessment method for video-display unit (VDU) workstation ergonomics. The aim was to determine to what extent the expert assessment of ergonomics is related to the technical measurements, tidiness and space, work chair ergonomics and responds to changes in these characteristics. Technical measurements and video-recordings before and 2 months after an ergonomic intervention were made for 109 VDU office workstations. Two experts in ergonomics analysed and rated the ergonomics of the workstations. A researcher analysed tidiness and available space. A physiotherapist classified the work chairs used according to their ergonomic properties. The intra-class correlation coefficient between the workstation ergonomic ratings of the two experts was 0.74 at the baseline and 0.81 at the follow-up. Workstation tidiness and space, and work chair ergonomics, had a strong effect on the assessments of both experts. For both experts a change in the locations of the mouse, the screen and the keyboard and values of tidiness and space and work chair ergonomics during the intervention showed a significant association with the ratings. The assessment method studied can be utilized by an expert in a repeatable manner both in cross-sectional and in longitudinal settings.

Whole-body vibration in heavy equipment operators of a front-end loader: role of task exposure and tire configuration with and without traction chains.

PubMed

Blood, Ryan P; Rynell, Patrik W; Johnson, Peter W

2012-12-01

This study measured whole-body vibration (WBV) exposures in front-end loader operators, and evaluated the effects of traction chains and work tasks on their WBV exposures. WBV exposures were measured and compared across three different front-end loader tire configurations: (a) stock rubber tires, (b) rubber tires with ladder chains, and (c) rubber tires with basket chains. The operators completed three distinct standardized tasks: driving on a city street, simulated plowing, and a simulated scooping and dumping task. A portable data acquisition system collected tri-axial time weighted and raw WBV data per ISO 2631-1 and 2631-5 standards. In addition, Global Positioning System (GPS) data were collected in order to compare loader speeds across tire conditions and the standardized tasks. Relative to the stock rubber tires, both types of tire chains significantly increased WBV exposures with the ladder chains having substantially higher WBV exposures compared to basket chains. Additionally, there were task dependent differences in WBV exposures. During the driving task, the z-axis (up and down) was the predominant exposure; the plowing task had a more even distribution of exposure across all three axes; while during scooping and dumping task, the x-axis (fore and aft) had the highest WBV exposures. The GPS data indicated that there were significant speed differences across tasks but not between the basket and ladder chain conditions. Tires with ladder chains increased the front-end loader operators' exposure to WBV above the ISO 2631-1 recommended eight hour action limit increasing risk for adverse health effects. Although more expensive, basket chains are recommended over ladder chains since they substantially lowered the front-end loader operator's exposures and may ultimately reduce vibration related wear and tear on the vehicle. In order to reduce a heavy equipment vehicle (HEV) operator's chances for developing low back pain, this study provides information that

Ergonomics in dentistry: experiences of the practice by dental students.

PubMed

Garcia, P P N S; Gottardello, A C A; Wajngarten, D; Presoto, C D; Campos, J A D B

2017-08-01

The aim of this study was to qualitatively evaluate the experiences of students enrolled in the last year of dentistry school with ergonomic practice. This is a qualitative, observational and cross-sectional study, with a non-probabilistic sample design. The sample comprised students enrolled in the last year of dentistry in Araraquara-UNESP (n = 29). The data were collected by means of open semi-structured and individual interviews, captured by a digital voice recorder. The students were interviewed in their own university at a time that was previously scheduled, and care was taken to provide a private and welcoming environment to carry out the interviews. A script containing questions related to practices in ergonomics was prepared at the university. Data analysis was carried out using the qualitative-quantitative Collective Subject Discourse technique with the aid of Qualiquantisoft ® software program. It was found that more than half of the students (58.6%) believe that adopting an ergonomic posture is important to prevent future problems, pain and occupational diseases, and 62.1% of the students confirm having difficulties in adopting ergonomic postures due to the types of treatment required and the regions of the mouth being treated. The main reasons stated for the fact that their colleagues do not adopt ergonomic postures are lack of attention, practice and forgetfulness (44.8%) and difficulty in visualising the operatory field or the procedure performed (27.6%). It is possible to conclude that the students interviewed know ergonomic principles and their importance in occupational health. However, they found it difficult to put these principles into practice. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The discipline of ergonomics in Cuba within the occupational health framework: background and trends.

PubMed

Torres, Yaniel; Rodríguez, Yordán; Viña, Silvio

2013-01-01

The concept of ergonomics was introduced in Cuba at the beginning of the 1970s. More than 40 years later, the prevailing approach to workers' health is still generally reactive rather than proactive, despite the commitment of the government to the subject. A factor influencing this issue is, generally, lack of recognition of the benefits of establishing ergonomic principles within most occupational activities. Recent progress to move occupational health practice toward a more preventive approach has been conducted, frequently with international support. The introduction of a set of Cuban standards proposing the necessity of ergonomic evaluations is an example of this progress. The main challenge for Cuban ergonomists is to transfer knowledge to occupational health practitioners in order to be in concordance with basic standards and regulations regarding ergonomics. The article offers a short description of the history of ergonomics and an overview of ergonomics practice in Cuba.

Characterization of occupational exposures to cleaning products used for common cleaning tasks--a pilot study of hospital cleaners.

PubMed

Bello, Anila; Quinn, Margaret M; Perry, Melissa J; Milton, Donald K

2009-03-27

In recent years, cleaning has been identified as an occupational risk because of an increased incidence of reported respiratory effects, such as asthma and asthma-like symptoms among cleaning workers. Due to the lack of systematic occupational hygiene analyses and workplace exposure data, it is not clear which cleaning-related exposures induce or aggravate asthma and other respiratory effects. Currently, there is a need for systematic evaluation of cleaning products ingredients and their exposures in the workplace. The objectives of this work were to: a) identify cleaning products' ingredients of concern with respect to respiratory and skin irritation and sensitization; and b) assess the potential for inhalation and dermal exposures to these ingredients during common cleaning tasks. We prioritized ingredients of concern in cleaning products commonly used in several hospitals in Massachusetts. Methods included workplace interviews, reviews of product Materials Safety Data Sheets and the scientific literature on adverse health effects to humans, reviews of physico-chemical properties of cleaning ingredients, and occupational hygiene observational analyses. Furthermore, the potential for exposure in the workplace was assessed by conducting qualitative assessment of airborne exposures and semi-quantitative assessment of dermal exposures. Cleaning products used for common cleaning tasks were mixtures of many chemicals, including respiratory and dermal irritants and sensitizers. Examples of ingredients of concern include quaternary ammonium compounds, 2-butoxyethanol, and ethanolamines. Cleaning workers are at risk of acute and chronic inhalation exposures to volatile organic compounds (VOC) vapors and aerosols generated from product spraying, and dermal exposures mostly through hands. Cleaning products are mixtures of many chemical ingredients that may impact workers' health through air and dermal exposures. Because cleaning exposures are a function of product

Characterization of occupational exposures to cleaning products used for common cleaning tasks-a pilot study of hospital cleaners

PubMed Central

2009-01-01

Background In recent years, cleaning has been identified as an occupational risk because of an increased incidence of reported respiratory effects, such as asthma and asthma-like symptoms among cleaning workers. Due to the lack of systematic occupational hygiene analyses and workplace exposure data, it is not clear which cleaning-related exposures induce or aggravate asthma and other respiratory effects. Currently, there is a need for systematic evaluation of cleaning products ingredients and their exposures in the workplace. The objectives of this work were to: a) identify cleaning products' ingredients of concern with respect to respiratory and skin irritation and sensitization; and b) assess the potential for inhalation and dermal exposures to these ingredients during common cleaning tasks. Methods We prioritized ingredients of concern in cleaning products commonly used in several hospitals in Massachusetts. Methods included workplace interviews, reviews of product Materials Safety Data Sheets and the scientific literature on adverse health effects to humans, reviews of physico-chemical properties of cleaning ingredients, and occupational hygiene observational analyses. Furthermore, the potential for exposure in the workplace was assessed by conducting qualitative assessment of airborne exposures and semi-quantitative assessment of dermal exposures. Results Cleaning products used for common cleaning tasks were mixtures of many chemicals, including respiratory and dermal irritants and sensitizers. Examples of ingredients of concern include quaternary ammonium compounds, 2-butoxyethanol, and ethanolamines. Cleaning workers are at risk of acute and chronic inhalation exposures to volatile organic compounds (VOC) vapors and aerosols generated from product spraying, and dermal exposures mostly through hands. Conclusion Cleaning products are mixtures of many chemical ingredients that may impact workers' health through air and dermal exposures. Because cleaning

The PhOCoe Model--ergonomic pattern mapping in participatory design processes.

PubMed

Silva e Santos, Marcello

2012-01-01

The discipline and practice of human factors and ergonomics is quite rich in terms of the availability of analysis, development and evaluation tools and methods for its various processes. However, we lack effective instruments to either map or regulate comprehensively and effectively, cognitive and organizational related impacts, especially the environmental ones. Moreover, when ergonomic transformations through design - such as a new workstation design or even an entire new facility - is at play, ergonomics professionals tend to stay at bay, relying solely on design professionals and engineers. There is vast empirical evidence showing that participation of ergonomists as project facilitators, may contribute to an effective professional synergy amongst the various stakeholders in a multidisciplinary venue. When that happens, everyone wins - users and designers alike -because eventual conflicts, raised up in the midst of options selection, are dissipated in exchange for more convergent design alternatives. This paper presents a method for participatory design, in which users are encouraged to actively participate in the whole design process by sharing their real work activities with the design team. The negotiated results inferred from the ergonomic action and translated into a new design, are then compiled into a "Ergonomic Pattern Manual". This handbook of ergonomics-oriented design guidelines contains essential guidelines to be consulted in recurrent design project situations in which similar patterns might be used. The main drive is simple: nobody knows better than workers themselves what an adequate workplace design solution (equipment, workstation, office layout) should be.

The amount of ergonomics and user involvement in 151 design processes.

PubMed

Kok, Barbara N E; Slegers, Karin; Vink, Peter

2012-01-01

Ergonomics, usability and user-centered design are terms that are well known among designers. Yet, products often seem to fail to meet the users' needs, resulting in a gap between expected and experienced usability. To understand the possible causes of this gap the actions taken by the designer during the design process are studied in this paper. This can show whether and how certain actions influence the user-friendliness of the design products. The aim of this research was to understand whether ergonomic principles and methods are included in the design process, whether users are involved in this process and whether the experience of the designer (in ergonomics/user involvement) has an effect on the end product usability. In this study the design processes of 151 tangible products of students in design were analyzed. It showed that in 75% of the cases some ergonomic principles were applied. User involvement was performed in only 1/3 of the design cases. Hardly any correlation was found between the designers' experience in ergonomic principles and the way they applied it and no correlations were found between the designers' experience in user involvement and the users' involvement in the design process.

Connections between voice ergonomic risk factors and voice symptoms, voice handicap, and respiratory tract diseases.

PubMed

Rantala, Leena M; Hakala, Suvi J; Holmqvist, Sofia; Sala, Eeva

2012-11-01

The aim of the study was to investigate the connections between voice ergonomic risk factors found in classrooms and voice-related problems in teachers. Voice ergonomic assessment was performed in 39 classrooms in 14 elementary schools by means of a Voice Ergonomic Assessment in Work Environment--Handbook and Checklist. The voice ergonomic risk factors assessed included working culture, noise, indoor air quality, working posture, stress, and access to a sound amplifier. Teachers from the above-mentioned classrooms reported their voice symptoms, respiratory tract diseases, and completed a Voice Handicap Index (VHI). The more voice ergonomic risk factors found in the classroom the higher were the teachers' total scores on voice symptoms and VHI. Stress was the factor that correlated most strongly with voice symptoms. Poor indoor air quality increased the occurrence of laryngitis. Voice ergonomics were poor in the classrooms studied and voice ergonomic risk factors affected the voice. It is important to convey information on voice ergonomics to education administrators and those responsible for school planning and taking care of school buildings. Copyright © 2012 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

Ergonomics in an oral pathology laboratory: Back to basics in microscopy

PubMed Central

Sundaragiri, Krishna Sireesha; Shrivastava, Shikha; Sankhla, Bharat; Bhargava, Akshay

2014-01-01

Ergonomics is simply a science focused on “study of work” to reduce fatigue and discomfort through product design. A comprehensive ergonomics program for the pathology laboratory has become necessary to prevent the occurrence of work related musculoskeletal disorders (MSDs) and accidents. Most of the literature on ergonomics involve various web links or occasional studies on the effect of laboratory work and associated MSDs. A Google search was carried out corresponding to the terms “ergonomics”, “pathology laboratory”, “microscope”. All the relevant literature from web sources was sorted out and categorized. In this review, we intend to identify basic anthropometric factors, biomechanical risk factors, laboratory design considerations and specific microscopy-related considerations. The ultimate aim of ergonomics is to provide a safe environment for laboratory personnel to conduct their work and to allow maximum flexibility for safe research use. PMID:25364157

AGENDA: A task organizer and scheduler

NASA Technical Reports Server (NTRS)

Fratter, Isabelle

1993-01-01

AGENDA will be the main tool used in running the SPOT 4 Earth Observation Satellite's Operational Control Center. It will reduce the operator's work load and make the task easier. AGENDA sets up the work plan for a day of operations, automatically puts the day's tasks into sequence and monitors their progress in real time. Monitoring is centralized, and the tasks are run on different computers in the Center. Once informed of any problems, the operator can intervene at any time while an activity is taking place. To carry out the various functions, the operator has an advanced, efficient, ergonomic graphic interface based on X11 and OSF/MOTIF. Since AGENDA is the heart of the Center, it has to satisfy several constraints that have been taken into account during the various development phases. AGENDA is currently in its final development stages.

Mass of materials: the impact of designers on construction ergonomics.

PubMed

Smallwood, John

2012-01-01

Many construction injuries are musculoskeletal related in the form of sprains and strains arising from the handling of materials, which are specified by designers. The paper presents the results of a study conducted among delegates attending two 'designing for H&S' (DfH&S) seminars using a questionnaire. The salient findings include: the level of knowledge relative to the mass and density of materials is limited; designers generally do not consider the mass and density of materials when designing structures and elements and specifying materials; to a degree designers appreciate that the mass and density of materials impact on construction ergonomics; designers rate their knowledge of the mass and density of materials as limited, and designers appreciate the potential of the consideration of the mass and density of materials to contribute to an improvement in construction ergonomics. Conclusions include: designers lack the requisite knowledge relative to the mass and density of materials; designers are thus precluded from conducting optimum design hazard identification and risk assessments, and tertiary built environment designer education does not enlighten designers relative to construction ergonomics. Recommendations include: tertiary built environment designer education should construction ergonomics; professional associations should raise the level of awareness relative to construction ergonomics, and design practices should include a category 'mass and density of materials' in their practice libraries.

Effects of automation and task load on task switching during human supervision of multiple semi-autonomous robots in a dynamic environment.

PubMed

Squire, P N; Parasuraman, R

2010-08-01

The present study assessed the impact of task load and level of automation (LOA) on task switching in participants supervising a team of four or eight semi-autonomous robots in a simulated 'capture the flag' game. Participants were faster to perform the same task than when they chose to switch between different task actions. They also took longer to switch between different tasks when supervising the robots at a high compared to a low LOA. Task load, as manipulated by the number of robots to be supervised, did not influence switch costs. The results suggest that the design of future unmanned vehicle (UV) systems should take into account not simply how many UVs an operator can supervise, but also the impact of LOA and task operations on task switching during supervision of multiple UVs. The findings of this study are relevant for the ergonomics practice of UV systems. This research extends the cognitive theory of task switching to inform the design of UV systems and results show that switching between UVs is an important factor to consider.

Optimal ergonomics for laparoscopic surgery in minimally invasive surgery suites: a review and guidelines.

PubMed

van Det, M J; Meijerink, W J H J; Hoff, C; Totté, E R; Pierie, J P E N

2009-06-01

With minimally invasive surgery (MIS), a man-machine environment was brought into the operating room, which created mental and physical challenges for the operating team. The science of ergonomics analyzes these challenges and formulates guidelines for creating a work environment that is safe and comfortable for its operators while effectiveness and efficiency of the process are maintained. This review aimed to formulate the ergonomic challenges related to monitor positioning in MIS. Background and guidelines are formulated for optimal ergonomic monitor positioning within the possibilities of the modern MIS suite, using multiple monitors suspended from the ceiling. All evidence-based experimental ergonomic studies conducted in the fields of laparoscopic surgery and applied ergonomics for other professions working with a display were identified by PubMed searches and selected for quality and applicability. Data from ergonomic studies were evaluated in terms of effectiveness and efficiency as well as comfort and safety aspects. Recommendations for individual monitor positioning are formulated to create a personal balance between these two ergonomic aspects. Misalignment in the eye-hand-target axis because of limited freedom in monitor positioning is recognized as an important ergonomic drawback during MIS. Realignment of the eye-hand-target axis improves personal values of comfort and safety as well as procedural values of effectiveness and efficiency. Monitor position is an important ergonomic factor during MIS. In the horizontal plain, the monitor should be straight in front of each person and aligned with the forearm-instrument motor axis to avoid axial rotation of the spine. In the sagittal plain, the monitor should be positioned lower than eye level to avoid neck extension.

[Ergonomics and productivity: an example applied to a manufacturing industry].

PubMed

Battevi, Natale; Vitelli, Nora

2013-01-01

The survival of manufacturing in the western world also depends on the ability to increase productivity. To achieve this goal, it is necessary to recover the efficiency of all workers suffering from upper limb biomechanical overload disease. Ergonomic methods can be a valuable tool in solving this apparent conflict: operatives'productivity and health. After carrying out an ergonomic education and training programme for all company employees and risk assessment for upper limb biomechanical overload through the OCRA checklist method, a programme of improvements on a production line was planned and tested, mainly based on international and European standards. Within approximately 2 years, thanks to changes in workplace layout and organization, a significant reduction of 22.7% in risk level was achieved and, at the same time, a 16% increase in productivity. An ergonomic approach based on global, interdisciplinary and participatory principles in the case considered showed that it is possible to match increased productivity with decreased risk. In this specific case application of ergonomic principles during product design was rather poor, which is typical of companies working for third party customers.

Understanding knowledge transfer in an ergonomics intervention at a poultry processing plant.

PubMed

Antle, David M; MacKinnon, Scott N; Molgaard, John; Vézina, Nicole; Parent, Robert; Bornstein, Stephen; Leclerc, Louise

2011-01-01

This case study reviews the knowledge transfer (KT) process of implementing a knife sharpening and steeling program into a poultry processing plant via a participatory ergonomics intervention. This ergonomics intervention required stakeholder participation at the company level to move a 'train-the-trainer' program, developed in Québec, Canada, into action on the plant's deboning line. Communications and exchanges with key stakeholders, as well as changes in steeling and production behaviours were recorded. The intervention was assumed to be at least partially successful because positive changes in work operations occurred. Ergonomic-related changes such as those documented have been cited in the academic literature as beneficial to worker health. However, several components cited in literature that are associated with a successful participatory ergonomics intervention were not attained during the project. A Dynamic Knowledge Transfer Model was used to identify KT issues that impacted on the success of train-the-trainer program. A debriefing analysis reveals that a failure to consider key participatory ergonomics factors necessary for success were related to capacity deficits in the knowledge dissemination strategy.

The application of participatory ergonomics in a healthcare setting in Hong Kong.

PubMed

Lee, Edwin W C; Fok, Joan P C; Lam, Augustine T; Law, Rainbow K Y; Szeto, Grace P Y; Li, Philip P K

2014-01-01

Work-related musculoskeletal disorders (WRMDs) are recognized as a major source of significant pain and disability in the healthcare sector. However, they are preventable if appropriate surveillance and intervention programs are implemented. The purpose of this paper is to describe the holistic ergonomic approach that was used to address the multifactorial problems encountered by healthcare workers in their daily work. Using participatory ergonomics, healthcare workers in this study teamed up with management and staff with expertise in ergonomic analysis, design, and implementation of remedies. Selected participatory ergonomic intervention programs targeted at an organizational level are elaborated. Interventions included pre-work stretching, workplace surveillance at a psychiatric department, on-site ergonomic teaching for community nurses, and display screen equipment consultancy. Changes in workplace design, equipment re-arrangement, awareness of proper posture, and adoption of good work practices all play important roles in reducing musculoskeletal disorders among healthcare workers. Prompt occupational medicine and rehabilitation services were also provided to complement the work disability prevention process. The impact of the various intervention programs on staff health, costs and productivity of the organization are simultaneously discussed.

Connections between voice ergonomic risk factors in classrooms and teachers' voice production.

PubMed

Rantala, Leena M; Hakala, Suvi; Holmqvist, Sofia; Sala, Eeva

2012-01-01

The aim of the study was to investigate if voice ergonomic risk factors in classrooms correlated with acoustic parameters of teachers' voice production. The voice ergonomic risk factors in the fields of working culture, working postures and indoor air quality were assessed in 40 classrooms using the Voice Ergonomic Assessment in Work Environment - Handbook and Checklist. Teachers (32 females, 8 males) from the above-mentioned classrooms recorded text readings before and after a working day. Fundamental frequency, sound pressure level (SPL) and the slope of the spectrum (alpha ratio) were analyzed. The higher the number of the risk factors in the classrooms, the higher SPL the teachers used and the more strained the males' voices (increased alpha ratio) were. The SPL was already higher before the working day in the teachers with higher risk than in those with lower risk. In the working environment with many voice ergonomic risk factors, speakers increase voice loudness and use more strained voice quality (males). A practical implication of the results is that voice ergonomic assessments are needed in schools. Copyright © 2013 S. Karger AG, Basel.

Do we need sustainability as a new approach in human factors and ergonomics?

PubMed

Zink, Klaus J; Fischer, Klaus

2013-01-01

The International Ergonomics Association Technical Committee 'Human Factors and Sustainable Development' was established to contribute to a broad discourse about opportunities and risks resulting from current societal 'mega-trends' and their impacts on the interactions among humans and other elements of a system, e.g. in work systems. This paper focuses on the underlying key issues: how do the sustainability paradigm and human factors/ergonomics interplay and interact, and is sustainability necessary as a new approach for our discipline? Based on a discussion of the sustainability concept, some general principles for designing new and enhancing existent approaches of human factors and ergonomics regarding their orientation towards sustainability are proposed. The increasing profile of sustainability on the international stage presents new opportunities for human factors/ergonomics. Positioning of the sustainability paradigm within human factors/ergonomics is discussed. Approaches to incorporating sustainability in the design of work systems are considered.

Ergonomic evaluation and comparison of wood harvesting systems in Northwest Russia.

PubMed

Gerasimov, Yuri; Sokolov, Anton

2014-03-01

A comparison of 14 currently applicable wood harvesting systems was assessed with respect to ergonomic point of view. For this purpose, the research method, based on the Hodges-Lehmann rule and the integrated work-severity rate of single machinery, was developed for ergonomic evaluation of cut-to-length, tree-length and full-tree harvesting systems. Altogether, about 130 different parameters of 36 units of equipment that impact on the ergonomics and work conditions were measured and estimated in interviews undertaken directly at forestry harvesting workplaces in 15 logging companies in the Republic of Karelia, Northwest Russia. Then the results were compared to the effective norms, and the degree of compliance with the stipulated values was determined. The estimates obtained for the degree of compliance were combined. This permits a direct comparison of the workload on forestry harvesting workers such as operators, lumberjacks and choker setters. In many respects, the current ergonomic standard is standard, except for the operators of cable skidders, chainsaws and choker settings. Visibility and work postures were considered to be the most critical features influencing the operator's performance. Problems still exist, despite the extensive development of cabs. The best working conditions in terms of harvesting systems were provided by "harvester + forwarder" in cut-to-length harvesting, and "feller-buncher + grapple skidder" in full-tree harvesting. The motor-manual tree-length harvesting performed with cable skidders showed the worst results in terms of ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

[Ergonomics in planning and reconstruction].

PubMed

Baglioni, A; Capolongo, S

2002-01-01

The state of well being of people is not represented only by any illness, but also by the satisfaction of all environmental components around him. For this reason, the hospitals demand new and more project attentions and in particular they demand specific attentions for all the environmental qualities (light, colours, indoor air qualities, and temperature), the equipment, the furniture and the privacy. This new attention to the requirements of people, during the phase of planning, needs the ergonomic studies. This kind of discipline, in fact, has got the objective of good relationships between men and context where they live. The study of ergonomic qualities needs different competence of multiple areas of acquaintance, that collaborate to analyse the requirements of sanitary structure, and in particular they analyse needs of different categories of people that work or stay in this place (the patients, visitors and sanitary staff). Moreover ergonomic studies concurs to analyse the various factors of complexity, of the buildings, that are very important for the project of hospital. From the scientific literature, we say that some physical environmental characteristics (light, colour, noise,) can influence the psychological conditions of people, and in particular they can generate three different categories of reactions: behavioural, neuropsychological, neuroendocrinal. For this reason the study of all the environmental factors, simple and composed, is a primary necessity in the hospital planning. In this way we can guarantee to the patient, a better sanitary service and a better comfort, and we can guarantee to all sanitary staff adequate conditions of security and functionality.

Ergonomic assessment methodologies in manual handling of loads--opportunities in organizations.

PubMed

Pires, Claudia

2012-01-01

The present study was developed based on the analysis of workplaces in the engineering industry, particularly in automotive companies. The main objectives of the study were to evaluate the activities present in the workplace concerning manual handling, using assessment methodologies NIOSH Ergonomic Equation [1] and Manual Material Handling [2], present in ISO 11228 [3-4], and to consider the possibility of developing musculoskeletal injuries associated with these activities, an issue of great concern in all industrial sectors. Similarly, it was also shown the suitability of each method to the task concerned. The study was conducted in three steps. The first step was to collect images and information about the target tasks. As a second step proceeded to the analysis, determining the method to use and to evaluate activities. Finally, we found the results obtained and acted on accordingly. With the study observed situations considered urgent action, according to the methodologies used, and proceeded to develop solutions in order to solve the problems identified, eliminating and / or minimizing embarrassing situations and harmful to employees.

Crossing levels in systems ergonomics: a framework to support 'mesoergonomic' inquiry.

PubMed

Karsh, Ben-Tzion; Waterson, Patrick; Holden, Richard J

2014-01-01

In this paper we elaborate and articulate the need for what has been termed 'mesoergonomics'. In particular, we argue that the concept has the potential to bridge the gap between, and integrate, established work within the domains of micro- and macroergonomics. Mesoergonomics is defined as an open systems approach to human factors and ergonomics (HFE) theory and research whereby the relationship between variables in at least two different system levels or echelons is studied, and where the dependent variables are human factors and ergonomic constructs. We present a framework which can be used to structure a set of questions for future work and prompt further empirical and conceptual inquiry. The framework consists of four steps: (1) establishing the purpose of the mesoergonomic investigation; (2) selecting human factors and ergonomics variables; (3) selecting a specific type of mesoergonomic investigation; and (4) establishing relationships between system levels. In addition, we describe two case studies which illustrate the workings of the framework and the value of adopting a mesoergonomic perspective within HFE. The paper concludes with a set of issues which could form part of a future agenda for research within systems ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomics action research I: shifting from hypothesis testing to experiential learning.

PubMed

Neumann, W P; Dixon, S M; Ekman, M

2012-01-01

This paper presents the case for the need for 'Action Research' (AR) approaches to gain understanding of how ergonomics considerations can best be integrated into the design of new work systems. The AR researchers work collaboratively with other stakeholders to solve a real-world problem: gaining insight into the problem and factors influencing solution building from an embedded position in the development process. This experience is interpreted in terms of available theory and can support further theory development. This non-experimental approach can help provide practical new approaches for integrating ergonomics considerations into real work system design processes. The AR approach suffers from a lack of acceptance by conventionally trained scientists. This paper aims to help overcome this weakness by developing the underlying theory and rationale for using AR approaches in ergonomics research. We propose further development of hybrid approaches which incorporate other evaluation techniques to extend the knowledge gains from AR projects. Researchers should engage directly with organisations in ergonomics projects so that they can better understand the challenges and needs of practitioners who are trying to apply available scientific knowledge in their own unique context. Such 'Action Research' could help develop theory and approaches useful to improve mobilisation and application of ergonomics knowledge in organisations.

Ergonomics and design: traffic sign and street name sign.

PubMed

Moroni, Janaina Luisa da Silva; Aymone, José Luís Farinatti

2012-01-01

This work proposes a design methodology using ergonomics and anthropometry concepts applied to traffic sign and street name sign projects. Initially, a literature revision on cognitive ergonomics and anthropometry is performed. Several authors and their design methodologies are analyzed and the aspects to be considered in projects of traffic and street name signs are selected and other specific aspects are proposed for the design methodology. A case study of the signs of "Street of Antiques" in Porto Alegre city is presented. To do that, interviews with the population are made to evaluate the current situation of signs. After that, a new sign proposal with virtual prototyping is done using the developed methodology. The results obtained with new interviews about the proposal show the user satisfaction and the importance of cognitive ergonomics to development of this type of urban furniture.

Evaluating a digital ship design tool prototype: Designers' perceptions of novel ergonomics software.

PubMed

Mallam, Steven C; Lundh, Monica; MacKinnon, Scott N

2017-03-01

Computer-aided solutions are essential for naval architects to manage and optimize technical complexities when developing a ship's design. Although there are an array of software solutions aimed to optimize the human element in design, practical ergonomics methodologies and technological solutions have struggled to gain widespread application in ship design processes. This paper explores how a new ergonomics technology is perceived by naval architecture students using a mixed-methods framework. Thirteen Naval Architecture and Ocean Engineering Masters students participated in the study. Overall, results found participants perceived the software and its embedded ergonomics tools to benefit their design work, increasing their empathy and ability to understand the work environment and work demands end-users face. However, participant's questioned if ergonomics could be practically and efficiently implemented under real-world project constraints. This revealed underlying social biases and a fundamental lack of understanding in engineering postgraduate students regarding applied ergonomics in naval architecture. Copyright © 2016 Elsevier Ltd. All rights reserved.

Ergonomics, quality and continuous improvement--conceptual and empirical relationships in an industrial context.

PubMed

Eklund, J

1997-10-01

This paper reviews the literature comparing the fields of ergonomics and quality, mainly in an industrial context, including mutual influences, similarities and differences. Relationships between ergonomics and the factors: work conditions, product design, ISO 9000, continuous improvements and TQM are reviewed in relation to the consequence, application, and process domains. The definitions of ergonomics and quality overlap substantially. Quality deficiencies, human errors and ergonomics problems often have the same cause, which in many cases can be traced to the design of work, workplace and environment e.g. noise, light, postures, loads, pace and work content. In addition, the possibility of performing to a high standard at work is an important prerequisite for satisfaction and well-being. Contradictions between the two fields have been identified in the view of concepts such as standardization, reduction of variability and copying of best practice, requiring further research. The field of quality would gain by incorporating ergonomics knowledge, especially in the areas of work design and human capability, since these factors are decisive for human performance and also therefore the performance of the systems involved. The field of ergonomics, on the other hand, would benefit from developing a stronger emphasis on methodologies and structures for improvement processes, including a clearer link with leadership and company strategies. Just as important is a further development of practicable participative ergonomics methods and tools for use at workplaces by the workers themselves, in order to integrate the top-down and the bottom-up processes and achieve better impact. Using participative processes for problem-solving and continuous improvement, focusing ergonomics and quality jointly has a great potential for improving working conditions and quality results simultaneously, and satisfying most of the interested parties.

Ergonomics technology

NASA Technical Reports Server (NTRS)

Jones, W. L.

1977-01-01

Major areas of research and development in ergonomics technology for space environments are discussed. Attention is given to possible applications of the technology developed by NASA in industrial settings. A group of mass spectrometers for gas analysis capable of fully automatic operation has been developed for atmosphere control on spacecraft; a version for industrial use has been constructed. Advances have been made in personal cooling technology, remote monitoring of medical information, and aerosol particle control. Experience gained by NASA during the design and development of portable life support units has recently been applied to improve breathing equipment used by fire fighters.

Use of Ergonomic Measures Related to Musculoskeletal Complaints among Construction Workers: A 2-year Follow-up Study

PubMed Central

Boschman, Julitta S.; Frings-Dresen, Monique H.W.; van der Molen, Henk F.

2015-01-01

Background The physical work demands of construction work can be reduced using ergonomic measures. The aim of this study was to evaluate the use of ergonomic measures related to musculoskeletal disorders (MSDs) among construction workers. Methods A questionnaire was sent at baseline and 2 years later to 1,130 construction workers. We established (1) the proportion of workers reporting an increase in their use of ergonomic measures, (2) the proportion of workers reporting a decrease in MSDs, (3) the relative risk for an increase in the use of ergonomic measures and a decrease in MSDs, and (4) workers' knowledge and opinions about the use of ergonomic measures. Results At follow-up, response rate was 63% (713/1,130). The proportion of workers using ergonomic measures for vertical transport increased (34%, 144/419, p < 0.01); for measures regarding horizontal transport and the positioning of materials, no change was reported. The proportion of workers reporting shoulder complaints decreased (28%, 176/638, p = 0.02). A relationship between the use of ergonomic measures and MSDs was not found; 83% (581/704) of the workers indicated having sufficient knowledge about ergonomic measures. Lightening the physical load was reported to be the main reason for using them. Conclusion Only the use of ergonomic measures for vertical transport increased over a 2-year period. No relationship between the use of ergonomic measures and MSDs was found. Strategies aimed at improving the availability of ergonomic equipment complemented with individualized advice and training in using them might be the required next steps to increase the use of ergonomic measures. PMID:26106507

Novel ergonomic postural assessment method (NERPA) using product-process computer aided engineering for ergonomic workplace design.

PubMed

Sanchez-Lite, Alberto; Garcia, Manuel; Domingo, Rosario; Angel Sebastian, Miguel

2013-01-01

Musculoskeletal disorders (MSDs) that result from poor ergonomic design are one of the occupational disorders of greatest concern in the industrial sector. A key advantage in the primary design phase is to focus on a method of assessment that detects and evaluates the potential risks experienced by the operative when faced with these types of physical injuries. The method of assessment will improve the process design identifying potential ergonomic improvements from various design alternatives or activities undertaken as part of the cycle of continuous improvement throughout the differing phases of the product life cycle. This paper presents a novel postural assessment method (NERPA) fit for product-process design, which was developed with the help of a digital human model together with a 3D CAD tool, which is widely used in the aeronautic and automotive industries. The power of 3D visualization and the possibility of studying the actual assembly sequence in a virtual environment can allow the functional performance of the parts to be addressed. Such tools can also provide us with an ergonomic workstation design, together with a competitive advantage in the assembly process. The method developed was used in the design of six production lines, studying 240 manual assembly operations and improving 21 of them. This study demonstrated the proposed method's usefulness and found statistically significant differences in the evaluations of the proposed method and the widely used Rapid Upper Limb Assessment (RULA) method.

Warfighter Integrated Physical Ergonomics Tool Development: Needs Analysis and State of the Art Review

DTIC Science & Technology

2011-03-01

Humansystems® Warfighter Integrated Physical Ergonomics Tool Development Page 14 e) Forces: Griffon seat design assessments include questions of vibration...the suitability of alternative designs . Humansystems® Warfighter Integrated Physical Ergonomics Tool Development Page 5 e) Performance Measures...configurations to assess Humansystems® Warfighter Integrated Physical Ergonomics Tool Development Page 8 design and acquisition decisions, and more

Inculcating the ergonomic culture in developing countries: national healthy schoolbag initiative in Sri Lanka.

PubMed

Jayaratne, Kapila

2012-12-01

The aim of this article is to describe a survey on ergonomic factors of classroom environments of school children, their influence on health, and use of research outcomes to launch a healthy schoolbag initiative. Ergonomics have not yet well penetrated relevant fields in industrially developing countries, such as Sri Lanka. One of the crucial parameters of the school environment is ergonomics. Available evidence suggests ergonomic mismatches in classroom settings. Good practice examples in child ergonomic interventions are few in resource-poor contexts. A school-based cross-sectional study was conducted in a district in Sri Lanka with a sample of 1,607 children in Grades 6 to 8 with the use of a stratified multistage cluster sampling method. Many children did experience discomfort related to substandard seating arrangements in the classroom. A significant proportion had to turn their necks to see the blackboard. For many children, seating locations were not changed. There were widespread incompatibilities of classroom furniture with anthropometric dimensions of children. A majority of children perceived discomfort contributed by mismatched classroom furniture. Carriage of school materials was not healthy. Deficiencies were noted in weight, model, ergonomic features, and carrying behavior of bags. Children experienced several negative effects, in part attributable to mismatched ergonomic factors. The schoolbag was considered a priority issue. Findings were disseminated to stakeholders and to media. Solutions were contemplated on bag weight reduction, healthy schoolbag introduction, and behavior change in a collaborative initiative with the Education Ministry. Political, administrative, and business stakeholders were successfully engaged to inculcate an ergonomic culture in an industrially developing country.

Ergonomic analysis of primary and assistant surgical roles.

PubMed

Zihni, Ahmed M; Cavallo, Jaime A; Ray, Shuddhadeb; Ohu, Ikechukwu; Cho, Sohyung; Awad, Michael M

2016-06-15

Laparoscopic surgery is associated with a high degree of ergonomic stress. However, the stress associated with surgical assisting is not known. In this study, we compare the ergonomic stress associated with primary and assistant surgical roles during laparoscopic surgery. We hypothesize that higher ergonomic stress will be detected in the primary operating surgeon when compared with the surgical assistant. One right-hand dominant attending surgeon performed 698 min of laparoscopic surgery over 13 procedures (222 min primary and 476 min assisting), whereas electromyography data were collected from bilateral biceps, triceps, deltoids, and trapezius muscles. Data were analyzed in 1-min segments. Average muscle activation as quantified by maximal voluntary contraction (%MVC) was calculated for each muscle group during primary surgery and assisting. We compared mean %MVC values with unpaired t-tests. Activation of right (R) biceps and triceps muscle groups is significantly elevated while operating when compared with assisting (R biceps primary: 5.47 ± 0.21 %MVC, assistant: 3.93 ± 0.11, P < 0.001; R triceps primary: 6.53 ± 0.33 %MVC, assistant: 5.48 ± 0.18, P = 0.002). Mean activation of the left trapezius muscle group is elevated during assisting (primary: 4.33 ± 0.26 %MVC, assistant: 5.70 ± 0.40, P = 0.024). No significance difference was noted in the other muscle groups (R deltoid, R trapezius, left [L] biceps, L triceps, and L deltoid). We used surface electromyography to quantify ergonomic differences between operating and assisting. Surgical assisting was associated with similar and occasionally higher levels of muscle activation compared with primary operating. These findings suggest that surgical assistants face significant ergonomic stress, just as operating surgeons do. Steps must be taken to recognize and mitigate this stress in both operating surgeons and assistants. Copyright © 2016 Elsevier Inc. All rights reserved.

Musculoskeletal symptoms amongst clinical radiologists and the implications of reporting environment ergonomics--a multicentre questionnaire study.

PubMed

Rodrigues, Jonathan C L; Morgan, Steven; Augustine, Katharine; Clague, Gavin; Pearce, Tim; Pollentine, Adrian; Wallis, Adam; Wilson, David; McCoubrie, Paul

2014-04-01

This multicentre study aimed to assess compliance of the reporting environment with best ergonomic practice and to determine the prevalence of musculoskeletal symptoms related to working as a radiologist. All 148 radiology trainees and consultants in 10 hospitals across the region were invited to complete a musculoskeletal symptoms and reporting ergonomics questionnaire. Best ergonomic reporting practice was defined, following literature review, as being able to alter the following: monitor, desk, chair and armrest height, chair back support, ambient light, and temperature. The frequency that these facilities were available and how often they were used was determined. One hundred and twenty-three out of 148 (83%) radiologists responded, and 38% reported radiology-associated occupational injury. Lower back discomfort was the commonest radiology associated musculoskeletal symptom (41%). Only 13% of those with occupational injury sought the advice of occupational health. No reporting environments conformed completely to best ergonomic practice. Where certain facilities were available, less than a third of radiologists made personal ergonomic adjustments prior to starting a reporting session. Radiologists who had good self-assessed knowledge of best ergonomic practice had significantly less back discomfort than those with poor self-assessed knowledge (P < 0.005). We demonstrated high prevalence of musculoskeletal symptoms amongst radiologists. Poor compliance of the reporting environment with best ergonomic practice, in combination with our other findings of a low level of ergonomic awareness, low rates of making ergonomic adjustments and seeking appropriate help, may be implicated. We hope this study raises awareness of this issue and helps prevent long-term occupational injury amongst radiologists from poor ergonomic practice.

Analysis of the implementation of ergonomic design at the new units of an oil refinery.

PubMed

Passero, Carolina Reich Marcon; Ogasawara, Erika Lye; Baú, Lucy Mara Silva; Buso, Sandro Artur; Bianchi, Marcos Cesar

2012-01-01

Ergonomic design is the adaptation of working conditions to human limitations and skills in the physical design phase of a new installation, a new working system, or new products or tools. Based on this concept, the purpose of this work was to analyze the implementation of ergonomic design at the new industrial units of an oil refinery, using the method of Ergonomic Workplace Assessment. This study was conducted by a multidisciplinary team composed of operation, maintenance and industrial safety technicians, ergonomists, designers and engineers. The analysis involved 6 production units, 1 industrial wastewater treatment unit, and 3 utilities units, all in the design detailing phase, for which 455 ergonomic requirements were identified. An analysis and characterization of the requirements identified for 5 of the production units, involving a total of 246 items, indicated that 62% were related to difficult access and blockage operations, while 15% were related to difficulties in the circulation of employees inside the units. Based on these data, it was found that the ergonomic requirements identified in the design detailing phase of an industrial unit involve physical ergonomics, and that it is very difficult to identify requirements related to organizational or cognitive ergonomics.

Development and Evaluation of Ergonomic Interventions for Bucket Handling on Farms

PubMed Central

Fathallah, Fadi A.; Tang, Steven C.H.; Waters, Thomas R.

2016-01-01

Objective The aim of this study was to introduce and evaluate two interventions, Ergo Bucket Carrier (EBC) and Easy Lift (EL), for youths (and adults) to handle water/feed buckets on farms. Background The physical activities of both adult and youth farm workers contribute to the development of low-back disorders (LBDs). Many of the activities youths perform on farms are associated with increased LBD risk, particularly, the handling of water and feed buckets. Methods Seventeen adult and youth participants (10 males and seven females) participated in this study. To assess the risk of LBDs, the participants were instrumented with a three-dimensional spinal electrogoniometer while lifting, carrying, and dumping water buckets using traditional method and the two interventions. Results For both the adult and youth groups, the results showed that the two interventions significantly decrease the magnitudes of LBD risk in many of the tasks evaluated. Overall, the use of the EBC resulted in a 41% reduction in the level of LBD risk for the carrying task, and a reduction of 69% for the dumping task. Using the EL, on the other hand, is especially effective for lifting tasks (55% reduction in LBD risk). Results of the subjective response were consistent with the objective evaluations. Conclusion This study demonstrated the potential for ergonomic interventions in reducing LBD risk during the common farming task of bucket handling. Application Potential application of this study includes the introduction of the EBC and EL in family farms to reduce the LBD risk among youth and adult farmers. PMID:26994024

Evidence-based ergonomics education: Promoting risk factor awareness among office computer workers.

PubMed

Mani, Karthik; Provident, Ingrid; Eckel, Emily

2016-01-01

Work-related musculoskeletal disorders (WMSDs) related to computer work have become a serious public health concern. Literature revealed a positive association between computer use and WMSDs. The purpose of this evidence-based pilot project was to provide a series of evidence-based educational sessions on ergonomics to office computer workers to enhance the awareness of risk factors of WMSDs. Seventeen office computer workers who work for the National Board of Certification in Occupational Therapy volunteered for this project. Each participant completed a baseline and post-intervention ergonomics questionnaire and attended six educational sessions. The Rapid Office Strain Assessment and an ergonomics questionnaire were used for data collection. The post-intervention data revealed that 89% of participants were able to identify a greater number of risk factors and answer more questions correctly in knowledge tests of the ergonomics questionnaire. Pre- and post-intervention comparisons showed changes in work posture and behaviors (taking rest breaks, participating in exercise, adjusting workstation) of participants. The findings have implications for injury prevention in office settings and suggest that ergonomics education may yield positive knowledge and behavioral changes among computer workers.

Whole-body vibration exposure study in U.S. railroad locomotives--an ergonomic risk assessment.

PubMed

Johanning, Eckardt; Fischer, Siegfried; Christ, Eberhard; Göres, Benno; Landsbergis, Paul

2002-01-01

Whole-body vibration exposure of locomotive engineers and the vibration attenuation of seats in 22 U.S. locomotives (built between 1959 and 2000) was studied during normal revenue service and following international measurement guidelines. Triaxial vibration measurements (duration mean 155 min, range 84-383 min) on the seat and on the floor were compared. In addition to the basic vibration evaluation (aw rms), the vector sum (av), the maximum transient vibration value (MTVV/aw), the vibration dose value (VDV/(aw T1/4)), and the vibration seat effective transmissibility factor (SEAT) were calculated. The power spectral densities are also reported. The mean basic vibration level (aw rms) was for the fore-aft axis x = 0.18 m/sec2, the lateral axis y = 0.28 m/sec2, and the vertical axis z = 0.32 m/sec2. The mean vector sum was 0.59 m/sec2 (range 0.27 to 1.44). The crest factors were generally at or above 9 in the horizontal and vertical axis. The mean MTVV/aw was 5.3 (x), 5.1 (y), and 4.8 (z), and the VDV/(aw T1/4) values ranged from 1.32 to 2.3 (x-axis), 1.33 to 1.7 (y-axis), and 1.38 to 1.86 (z-axis), generally indicating high levels of shocks. The mean seat transmissibility factor (SEAT) was 1.4 (x) and 1.2 (y) and 1 (z), demonstrating a general ineffectiveness of any of the seat suspension systems. In conclusion, these data indicate that locomotive rides are characterized by relatively high shock content (acceleration peaks) of the vibration signal in all directions. Locomotive vertical and lateral vibrations are similar, which appears to be characteristic for rail vehicles compared with many road/off-road vehicles. Tested locomotive cab seats currently in use (new or old) appear inadequate to reduce potentially harmful vibration and shocks transmitted to the seated operator, and older seats particularly lack basic ergonomic features regarding adjustability and postural support.

Gender and ergonomics: a case study on the 'non-formal' work of women nurses.

PubMed

Salerno, Silvana; Livigni, Lucilla; Magrini, Andrea; Talamanca, Irene Figà

2012-01-01

Women's work activities are often characterised by 'non-formal actions' (such as giving support). Gender differences in ergonomics may be due to this peculiarity. We applied the method of organisational congruencies (MOC) to ascertain the 'non-formal' work portion of nurses employed in three hospital units (haematology, emergency room and general medicine) during the three work shifts in a major University Hospital in Rome, Italy. We recorded a total of 802 technical actions performed by nine nurses in 72 h of work. Twenty-six percent of the actions in direct patient's care were communicative actions (mainly giving psychological support) while providing physical care. These 'double actions' are often not considered to be a formal part of the job by hospital management. In our case study, the 'non-formal' work of nurses (psychological support) is mainly represented by double actions while taking physical care of the patients. The dual task paradigm in gender oriented research is discussed in terms of its implications in prevention in occupational health. The main purpose of the study was to assess all the formal and non-formal activities of women in the nursing work setting. Offering psychological support to patients is often not considered to be a formal part of the job. Our case study found that nurses receive no explicit guidelines on this activity and no time is assigned to perform it. In measuring the burden of providing psychological support to patients, we found that this is often done while nurses are performing tasks of physical care for the patients (double actions). The article discusses the significance of non-formal psychological work load of women nurses through double actions from the ergonomic point view.

Surgeons' physical discomfort and symptoms during robotic surgery: a comprehensive ergonomic survey study.

PubMed

Lee, G I; Lee, M R; Green, I; Allaf, M; Marohn, M R

2017-04-01

It is commonly believed that robotic surgery systems provide surgeons with an ergonomically sound work environment; however, the actual experience of surgeons practicing robotic surgery (RS) has not been thoroughly researched. In this ergonomics survey study, we investigated surgeons' physical symptom reports and their association with factors including demographics, specialties, and robotic systems. Four hundred and thirty-two surgeons regularly practicing RS completed this comprehensive survey comprising 20 questions in four categories: demographics, systems, ergonomics, and physical symptoms. Chi-square and multinomial logistic regression analyses were used for statistical analysis. Two hundred and thirty-six surgeons (56.1 %) reported physical symptoms or discomfort. Among those symptoms, neck stiffness, finger, and eye fatigues were the most common. With the newest robot, eye symptom rate was considerably reduced, while neck and finger symptoms did not improve significantly. A high rate of lower back stiffness was correlated with higher annual robotic case volume, and eye symptoms were more common with longer years practicing robotic surgery (p < 0.05). The symptom report rate from urology surgeons was significantly higher than other specialties (p < 0.05). Noticeably, surgeons with higher confidence and helpfulness levels with their ergonomic settings reported lower symptom report rates. Symptoms were not correlated with age and gender. Although RS provides relatively better ergonomics, this study demonstrates that 56.1 % of regularly practicing robotic surgeons still experience related physical symptoms or discomfort. In addition to system improvement, surgeon education in optimizing the ergonomic settings may be necessary to maximize the ergonomic benefits in RS.

Integration of time as a factor in ergonomic simulation.

PubMed

Walther, Mario; Muñoz, Begoña Toledo

2012-01-01

The paper describes the application of a simulation based ergonomic evaluation. Within a pilot project, the algorithms of the screening method of the European Assembly Worksheet were transferred into an existing digital human model. Movement data was recorded with an especially developed hybrid Motion Capturing system. A prototype of the system was built and is currently being tested at the Volkswagen Group. First results showed the feasibility of the simulation based ergonomic evaluation with Motion Capturing.

Ergonomics and musculoskeletal disorder: as an occupational hazard in dentistry.

PubMed

Gopinadh, Anne; Devi, Kolli Naga Neelima; Chiramana, Sandeep; Manne, Prakash; Sampath, Anche; Babu, Muvva Suresh

2013-03-01

Musculoskeletal disorders (MSDs) are commonly experienced in dentistry. The objective of this study is to determine the prevalence of ergonomics and MSDs among dental professionals. A cross-sectional survey was conducted among 170 dentists of different specialties. The questionnaire gathered information regarding demographic details, MSDs, work duration, working status, awareness of ergonomics, etc. Data was analyzed using SPSS version 15.0. Student's t-test and analysis of variance (ANOVA) test was used for comparison in mean scores. Stepwise multiple linear regression analysis was used to assess the independent variables that significantly influenced the variance in the dependent variable (pain). It was found that 73.9% of the participants reported musculoskeletal pain and most common painful sites were neck and back. More than half of the participants, i.e. 232 (59.3%) were aware of correct ergonomic posture regarding dental. Almost percentage of pain increased significantly with increase in age and working time. Among all specialties, prosthodontics were found to have more prevalence of MSDs. The appearance of musculoskeletal symptoms among dental professionals was quite common. It suggested that ergonomics should be covered in the educational system to reduce risks to dental practitioners.

Stereoscopic displays for virtual reality in the car manufacturing industry: application to design review and ergonomic studies

NASA Astrophysics Data System (ADS)

Moreau, Guillaume; Fuchs, Philippe

2002-05-01

In the car manufacturing industry the trend is to drastically reduce the time-to-market by increasing the use of the Digital Mock-up instead of physical prototypes. Design review and ergonomic studies are specific tasks because they involve qualitative or even subjective judgements. In this paper, we present IMAVE (IMmersion Adapted to a VEhicle) designed for immersive styling review, gaps visualization and simple ergonomic studies. We show that stereoscopic displays are necessary and must fulfill several constraints due to the proximity and size of the car dashboard. The duration fo the work sessions forces us to eliminate all vertical parallax, and 1:1 scale is obviously required for a valid immersion. Two demonstrators were realized allowing us to have a large set of testers (over 100). More than 80% of the testers saw an immediate use of the IMAVE system. We discuss the good and bad marks awarded to the system. Future work include being able to use several rear-projected stereo screens for doors and central console visualization, but without the parallax presently visible in some CAVE-like environments.

Practical ways to facilitate ergonomics improvements in occupational health practice.

PubMed

Kogi, Kazutaka

2012-12-01

Recent advances in participatory programs for improving workplace conditions are discussed to examine practical ways to facilitate ergonomics improvements. Participatory training programs are gaining importance, particularly in promoting occupational health and safety in small-scale workplaces. These programs have led to many improvements that can reduce work-related risks in varied situations. Recent experiences in participatory action-oriented training programs in small workplaces and agriculture are reviewed.The emphasis of the review is on training steps, types of improvements achieved, and the use of action tools by trainers and training participants. Immediate improvements in multiple technical areas are targeted, including materials handling,workstation design, physical environment, welfare facilities, and work organization. In facilitating ergonomics improvements in each local situation, it is important to focus on (a) building on local good practices; (b) applying practical, simple improvements that apply the basic principles of ergonomics; and (c) developing action-oriented toolkits for direct use by workers and managers. This facilitation process is effective when locally designed action toolkits are used by trainers, including local good examples, action checklists, and illustrated how-to guides. Intervention studies demonstrate the effectiveness of participatory steps that use these toolkits in promoting good practices and reducing work-related risks. In facilitating ergonomics improvements in small-scale workplaces, it is important to focus on practical, low-cost improvements that build on local good practices. The use of action-oriented toolkits reflecting basic ergonomics principles is helpful.The promotion of the intercountry networking of positive experiences in participatory training is suggested.

Ergonomics and dentistry.

PubMed

Murphy, D C

1997-01-01

Since 1992 the Occupational Safety and Health Administration (OSHA) has been preparing Federal legislation concerned with ergonomic hazards in at-risk workplaces. Although multifactorial in nature, there is sufficient evidence in the scientific literature to document an association between the practice of dentistry and a variety of musculoskeletal disorders. There are preventive strategies already known and available to us. Should dentistry be considered an at-risk profession and be required to comply with the forthcoming standard, or is self-monitoring sufficient?

Corporate ergonomics programme at automobiles Peugeot-Sochaux.

PubMed

Moreau, M

2003-01-01

An ergonomic assessment tool for design procedures, exclusive to Peugeot-Citroën, called ECM, was developed and applied at the design stage by method technicians in the 1990s. It generates data, which are followed up by the project leader of a new model and ergonomists until two years before each launch. During this time, vehicle design is subject to modification, to adapt to ergonomic demands. Simplified methods (DACORS and METEO) were also developed to assess workstations on the shop floor in trim and final plants. Assessments were used to grade the workstations into four profiles linked to physical and static requirements. Production technicians are responsible for the application of these local methods on the shop floor. The management of these centres aimed to reduce the risks of musculoskeletal disorders by reduced heavy profiles of these stations. New cases of musculoskeletal disorders, surveyed by the company doctor among workers on the assembly lines had decreased since 1996. In 1999, the incidence increased again, despite the pursuit of ergonomic methods. This increase in musculoskeletal disorders was above all linked to a major reorganisation of work conditions, including a reduction in the cycle time on the assembly line, and to a move into a new workshop.

The Minimally Invasive Manipulator: an ergonomic and economic non-robotic alternative for endoscopy?

PubMed

Bosma, Jesse; Aarts, Sanne; Jaspers, Joris

2015-02-01

Since the da Vinci robotic system was introduced, it has been reported to have ergonomic advantages over conventional laparoscopy (COV). High investments associated with this system challenged us to design a more economical, mechanical alternative for improvement of laparoscopic ergonomics: the Minimally Invasive Manipulator (MIM). An earlier reported MIM prototype was investigated. Its shortcomings were input for the establishment of design criteria for a new prototype. A new prototype was developed, aiming at improved intuitiveness and ergonomics. The handle and instrument tip were redesigned and the parallelogram mechanism was converted from linear moving parts to mainly rotating parts. The new prototype was tested by a panel of experts and novices during an indicative ergonomic experiment. A major advantage of the MIM seems to be the possibility to perform laparoscopic surgery in a sitting position, in line with the working axis, instead of standing at the side of the patient. At an estimated cost level of 10% of the da Vinci system, the MIM can be an economical alternative for the enhancement of laparoscopy ergonomics. However, further development for clinical feasibility is necessary.

Paper-cutting operations using scissors in Drury's law tasks.

PubMed

Yamanaka, Shota; Miyashita, Homei

2018-05-01

Human performance modeling is a core topic in ergonomics. In addition to deriving models, it is important to verify the kinds of tasks that can be modeled. Drury's law is promising for path tracking tasks such as navigating a path with pens or driving a car. We conducted an experiment based on the observation that paper-cutting tasks using scissors resemble such tasks. The results showed that cutting arc-like paths (1/4 of a circle) showed an excellent fit with Drury's law (R 2  > 0.98), whereas cutting linear paths showed a worse fit (R 2  > 0.87). Since linear paths yielded better fits when path amplitudes were divided (R 2  > 0.99 for all amplitudes), we discuss the characteristics of paper-cutting operations using scissors. Copyright © 2018 Elsevier Ltd. All rights reserved.

An investigation of low ergonomics risk awareness, among staffs at early product development phase in Malaysia automotive industries

NASA Astrophysics Data System (ADS)

Aziz, Fazilah Abdul; Razali, Noraini; Najmiyah Jaafar, Nur

2016-02-01

Currently there are many automotive companies still unable to effectively prevent consequences of poor ergonomics in their manufacturing processes. This study purpose is to determine the surrounding factors that influence low ergonomics risk awareness among staffs at early product development phase in Malaysia automotive industry. In this study there are four variables, low ergonomic risk awareness, inappropriate method and tools, tight development schedule and lack of management support. The survey data were gathered from 245 respondents of local automotive companies in Malaysia. The data was analysed through multiple regression and moderated regression using the IBM SPSS software. Study results revealed that low ergonomic risk awareness has influenced by inappropriate method and tool, and tight development schedule. There were positive linear relationships between low ergonomic risk awareness and inappropriate method and tools, and tight development schedule. The more inappropriate method and tools applied; the lower their ergonomic risk awareness. The more tight development schedule is the lower ergonomic risk awareness. The relationship between low ergonomic risk awareness and inappropriate method and tools depends on staff's age, and education level. Furthermore the relationship between low ergonomic risk awareness and tight development schedule depends on staff's working experience and number of project involvement. The main contribution of this paper was identified the number of factors of low ergonomics risk awareness and offers better understanding on ergonomics among researchers and automotive manufacturer's employees during product development process.

Ergonomics program management in Tucuruí Hydropower Plant using TPM methodology.

PubMed

Santos, R M; Sassi, A C; Sá, B M; Miguez, S A; Pardauil, A A

2012-01-01

This paper aims to present the benefits achieved in the ergonomics process management with the use of the TPM methodology (Total Productive Maintenance) in Tucuruí Hydropower Plant. The methodology is aligned with the corporate guidelines, moreover with the Strategic Planning of the company, it is represented in the TPM Pillars including the Health Pillar in which is inserted the ergonomics process. The results of the ergonomic actions demonstrated a 12% reduction over the absenteeism rate due to musculoskeletal disorders, solving 77,0% of ergonomic non-conformities, what favored the rise of the Organizational Climate in 44,8%, impacting on the overall performance of the company. Awards confirmed the success of the work by the achievement of the Award for TPM Excellence in 2001, Award for Excellence in Consistent TPM Commitment in 2009 and more recently the Special Award for TPM Achievement, 2010. The determination of the high rank administration and workers, allied with the involvement/dynamism of Pillars, has assured the success of this management practice in Tucuruí Hydropower Plant.

The implementation of ergonomics advice and the stage of change approach.

PubMed

Rothmore, Paul; Aylward, Paul; Karnon, Jonathan

2015-11-01

This paper investigates the implementation of injury prevention advice tailored according to the Stage of Change (SOC) approach. The managers of 25 workgroups, drawn from medium to large companies across a wide range of occupational sectors were allocated to receive either standard ergonomics advice or ergonomics advice tailored according to the workgroup SOC. Twelve months after the advice was provided, semi-structured interviews were conducted with each manager. In a multivariate model, managers who had received tailored advice were found to have implemented significantly more of the recommended changes (IRR = 1.68, 95% CI 1.07-2.63) and more "additional" changes (IRR = 1.90, 95% CI 1.12-3.20). Qualitative analysis identified that the key barriers and facilitators to the implementation of changes were largely related to worker resistance to change and the attitudes of senior managers towards health and safety. The findings from this study suggest that the implementation of ergonomics recommendations may be improved by the tailoring of advice according to SOC principles. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Sustainable Ergonomic Program - Basic Condition for Implementation of Corporate Social Responsibility

NASA Astrophysics Data System (ADS)

Marková, Petra; Beňo, Rastislav; Hatiar, Karol

2012-12-01

Gradually increasing pressure on companies to start to behave socially responsible is a response to social, environmental and economic requirements. The society faces a period of changes that have occurred since the beginning of the crisis and revealing weaknesses in the economy. We become witnesses of rapid changes and challenges posed by globalization, lack of resources, demographic structure and innovation. Objective necessity becomes a corporate social responsibility (CSR) already at the companies’ level, which is supported by the approach of the EU institutions and the Slovak Republic. One of the possible appliance through which we can contribute to the sustainability of CSR are sustainable ergonomic programs. When we want to talk about sustainable ergonomic program is important to focus on three key areas. The first area is the Impact of technic and technology to employees at work, the second area is the Importance and impact of socially responsible HR in ergonomics and last area is the Creation of the work environment in relation to environmental sustainability. Ergonomic programs sustainability requires to apply appropriate methods for evaluation of their cost benefit and health effect.

Novel Ergonomic Postural Assessment Method (NERPA) Using Product-Process Computer Aided Engineering for Ergonomic Workplace Design

PubMed Central

Sanchez-Lite, Alberto; Garcia, Manuel; Domingo, Rosario; Angel Sebastian, Miguel

2013-01-01

Background Musculoskeletal disorders (MSDs) that result from poor ergonomic design are one of the occupational disorders of greatest concern in the industrial sector. A key advantage in the primary design phase is to focus on a method of assessment that detects and evaluates the potential risks experienced by the operative when faced with these types of physical injuries. The method of assessment will improve the process design identifying potential ergonomic improvements from various design alternatives or activities undertaken as part of the cycle of continuous improvement throughout the differing phases of the product life cycle. Methodology/Principal Findings This paper presents a novel postural assessment method (NERPA) fit for product-process design, which was developed with the help of a digital human model together with a 3D CAD tool, which is widely used in the aeronautic and automotive industries. The power of 3D visualization and the possibility of studying the actual assembly sequence in a virtual environment can allow the functional performance of the parts to be addressed. Such tools can also provide us with an ergonomic workstation design, together with a competitive advantage in the assembly process. Conclusions The method developed was used in the design of six production lines, studying 240 manual assembly operations and improving 21 of them. This study demonstrated the proposed method’s usefulness and found statistically significant differences in the evaluations of the proposed method and the widely used Rapid Upper Limb Assessment (RULA) method. PMID:23977340

Nonlinear dynamical systems for theory and research in ergonomics.

PubMed

Guastello, Stephen J

2017-02-01

Nonlinear dynamical systems (NDS) theory offers new constructs, methods and explanations for phenomena that have in turn produced new paradigms of thinking within several disciplines of the behavioural sciences. This article explores the recent developments of NDS as a paradigm in ergonomics. The exposition includes its basic axioms, the primary constructs from elementary dynamics and so-called complexity theory, an overview of its methods, and growing areas of application within ergonomics. The applications considered here include: psychophysics, iconic displays, control theory, cognitive workload and fatigue, occupational accidents, resilience of systems, team coordination and synchronisation in systems. Although these applications make use of different subsets of NDS constructs, several of them share the general principles of the complex adaptive system. Practitioner Summary: Nonlinear dynamical systems theory reframes problems in ergonomics that involve complex systems as they change over time. The leading applications to date include psychophysics, control theory, cognitive workload and fatigue, biomechanics, occupational accidents, resilience of systems, team coordination and synchronisation of system components.

Promoting ergonomics in Algeria: activities of "the research and training laboratory" in the University of Oran.

PubMed

Mebarki, Bouhafs; El-Bachir, Tebboune Cheikh

2012-01-01

The growing need in Algeria to develop ergonomics knowledge and practice in industry was behind the initiative to develop a training and research project within the ergonomics laboratory at Oran University. Since 2005 the laboratory team is running an academic option master in work design and ergonomics. The evaluation of the academic master in 2010 revealed the acute need of the local industry for professional competences in ergonomic and work psychology. A professional training master program in "ergonomics & work psychology" was then developed in partnership with local industry, five European Universities and six Universities from three Maghreb countries. Research projects were initiated around the two training programs, in conjunction with a number of ergonomics dissemination and promotion activities. Preliminary results of the project are presented and discussed in relation to the local context, and in the light of similar cases in Industrially Developing Countries.

From ergonomics to design specifications: contributions to the design of a processing machine in a tire company.

PubMed

Moraes, A S P; Arezes, P M; Vasconcelos, R

2012-01-01

The development of ergonomics' recommendations, guidelines and standards are attempts to promote the integration of ergonomics into industrial contexts. Such developments result from several sources and professionals and represent the effort that has been done to develop healthier and safer work environments. However, the availability of large amount of data and documents regarding ergonomics does not guarantee their applicability. The main goal of this paper is to use a specific case to demonstrate how ergonomics criteria were developed in order to contribute to the design of workplaces. Based on the obtained results from research undertaken in a tire company, it was observed that the ergonomics criteria should be presented as design specifications in order to be used by engineers and designers. In conclusion, it is observed that the multiple constraint environment impeded the appliance of the ergonomics criteria. It was also observed that the knowledge on technical design and the acquaintance with ergonomic standards, the level of integration in the design team, and the ability to communicate with workers and other technical staff have paramount importance in integrating ergonomics criteria into the design process.

Effects on automatic attention due to exposure to pictures of emotional faces while performing Chinese word judgment tasks.

PubMed

Junhong, Huang; Renlai, Zhou; Senqi, Hu

2013-01-01

Two experiments were conducted to investigate the automatic processing of emotional facial expressions while performing low or high demand cognitive tasks under unattended conditions. In Experiment 1, 35 subjects performed low (judging the structure of Chinese words) and high (judging the tone of Chinese words) cognitive load tasks while exposed to unattended pictures of fearful, neutral, or happy faces. The results revealed that the reaction time was slower and the performance accuracy was higher while performing the low cognitive load task than while performing the high cognitive load task. Exposure to fearful faces resulted in significantly longer reaction times and lower accuracy than exposure to neutral faces on the low cognitive load task. In Experiment 2, 26 subjects performed the same word judgment tasks and their brain event-related potentials (ERPs) were measured for a period of 800 ms after the onset of the task stimulus. The amplitudes of the early component of ERP around 176 ms (P2) elicited by unattended fearful faces over frontal-central-parietal recording sites was significantly larger than those elicited by unattended neutral faces while performing the word structure judgment task. Together, the findings of the two experiments indicated that unattended fearful faces captured significantly more attention resources than unattended neutral faces on a low cognitive load task, but not on a high cognitive load task. It was concluded that fearful faces could automatically capture attention if residues of attention resources were available under the unattended condition.

Effects on Automatic Attention Due to Exposure to Pictures of Emotional Faces while Performing Chinese Word Judgment Tasks

PubMed Central

Junhong, Huang; Renlai, Zhou; Senqi, Hu

2013-01-01

Two experiments were conducted to investigate the automatic processing of emotional facial expressions while performing low or high demand cognitive tasks under unattended conditions. In Experiment 1, 35 subjects performed low (judging the structure of Chinese words) and high (judging the tone of Chinese words) cognitive load tasks while exposed to unattended pictures of fearful, neutral, or happy faces. The results revealed that the reaction time was slower and the performance accuracy was higher while performing the low cognitive load task than while performing the high cognitive load task. Exposure to fearful faces resulted in significantly longer reaction times and lower accuracy than exposure to neutral faces on the low cognitive load task. In Experiment 2, 26 subjects performed the same word judgment tasks and their brain event-related potentials (ERPs) were measured for a period of 800 ms after the onset of the task stimulus. The amplitudes of the early component of ERP around 176 ms (P2) elicited by unattended fearful faces over frontal-central-parietal recording sites was significantly larger than those elicited by unattended neutral faces while performing the word structure judgment task. Together, the findings of the two experiments indicated that unattended fearful faces captured significantly more attention resources than unattended neutral faces on a low cognitive load task, but not on a high cognitive load task. It was concluded that fearful faces could automatically capture attention if residues of attention resources were available under the unattended condition. PMID:24124486

Ergonomic Guidelines for Designing Effective and Healthy Learning Environments for Interactive Technologies.

ERIC Educational Resources Information Center

Weisberg, Michael

Many of the findings from ergonomics research on visual display workstations are relevant to the design of interactive learning stations. This 1993 paper briefly reviews ergonomics research on visual display workstations; specifically, (1) potential health hazards from electromagnetic radiation; (2) musculoskeletal disorders; (3)vision complaints;…

A legacy of struggle: the OSHA ergonomics standard and beyond, Part II.

PubMed

Delp, Linda; Mojtahedi, Zahra; Sheikh, Hina; Lemus, Jackie

2014-11-01

The OSHA ergonomics standard issued in 2000 was repealed within four months through a Congressional resolution that limits future ergonomics rulemaking. This section continues the conversation initiated in Part I, documenting a legacy of struggle for an ergonomics standard through the voices of eight labor, academic, and government key informants. Part I summarized important components of the standard; described the convergence of labor activism, research, and government action that laid the foundation for a standard; and highlighted the debates that characterized the rulemaking process. Part II explores the anti-regulatory political landscape of the 1990s, as well as the key opponents, power dynamics, and legal maneuvers that led to repeal of the standard. This section also describes the impact of the ergonomics struggle beyond the standard itself and ends with a discussion of creative state-level policy initiatives and coalition approaches to prevent work-related musculoskeletal disorders (WMSDs) in today's sociopolitical context.

Ergonomic risk factors associated with clinical dentistry.

PubMed

Rucker, Lance M; Sunell, Susanne

2002-02-01

Ergonomics has formed an integral aspect of dental education at the University of British Columbia since the early 1980s. However, studies continued to indicate that dentists are at risk for developing musculoskeletal problems. This provided the impetus for a study of the risk factors associated with these problems. The data analyzed from 421 survey respondents in British Columbia indicate that indeed dentists are experiencing musculoskeletal pain and discomfort. However, the data also suggest that dentists can recognize and identify their own postures, practicing positions, and the equipment usage patterns that are associated with increased risks of experiencing musculoskeletal pain and discomfort. Such recognition is the first critical step to avoiding or neutralizing ergonomic habits and work environment layouts that might otherwise unnecessarily shorten professional clinical careers.

Casting an ergonomic eye on university libraries.

PubMed

Ferrer, Nicole; Villarouco, Vilma

2012-01-01

Research in the field of Ergonomics of the Built Environment has been developed with a view to consolidating studies in this area, the objective of which is to provide evidence that the joint participation of users and designers on drawing up projects is important. In this context, the theme of this study is to investigate the interactions between users and the environment in a university library. To do so, well-established techniques from Ergonomics, Architecture and Environmental Psychology were used to make a functional and behavioral evaluation to identify the level of user satisfaction in six libraries in the various study centers of the Federal University of Pernambuco in Recife, northeast Brazil, so as to identify the strengths and also weaknesses in these spatial structures.

Green ergonomics: challenges and opportunities.

PubMed

Hanson, Margaret A

2013-01-01

Addressing the causes and consequences of environmental degradation presents significant challenges for humankind. This paper considers what ergonomics/human factors (E/HF) professionals can contribute to understanding and tackling some of the issues that arise through the movement towards a more environmentally sustainable economy. These issues are considered in relation to work in green industries (specifically, sustainable energy production, recycling and organic food production), and there is a need to ensure that these jobs are safe and healthy; the design of products and systems that are 'environmentally friendly' to facilitate their acceptability and use and how E/HF professionals can contribute to understanding and promoting behavioural change relating to environmental choices. The activities of some international organisations in this area are identified and the potential for E/HF involvement is considered. The implications for the E/HF profession are discussed. This paper considers how ergonomics/human factors professionals can contribute to the movement towards more sustainable and 'environmentally friendly' design and work. Potential challenges and opportunities are discussed in relation to jobs in green industries, products and systems and behaviour change.

Ergonomic workplace evaluation of an Asian garment-factory.

PubMed

Sarder, B; Imrhan, Sheik N; Mandahawi, Nabeel

2006-12-01

A large number of establishments in the garment industries of the world are situated in the southeastern part of Asia where labor is plentiful and cheap. Recent reports and observational studies suggest that employees in this industry often work under difficult conditions that are unacceptable in industrialized countries. This paper reports the results of an ergonomic study in an export garment manufacturing plant in South East Asia to evaluate the working conditions of the plant from an ergonomics/human factors perspective and to suggest possible solutions to management for implementation. The investigation was done by a questionnaire survey and by observations and measurements in the workplace. The results indicated that the plant conditions were stressful, involving long work hours with poor safety and labor relations, and that work equipment and the physical workplace design were acceptable ergonomic practices. A low-cost solution, presented to management by the investigators, was implemented and, over a period of six months, seemed to be the dominant reason for significant improvements in throughput (14.6%), reduction in absenteeism (65%), job satisfaction (40%), decrease in employee turnover (75%), and reduction in health complaints (50%).

Development of a Pamphlet Targeting Computer Workstation Ergonomics

NASA Technical Reports Server (NTRS)

Faraci, Jennifer S.

1997-01-01

With the increased use of computers throughout Goddard Space Flight Center, the Industrial Hygiene Office (IHO) has observed a growing trend in the number of health complaints attributed to poor computer workstation setup. A majority of the complaints has centered around musculoskeletal symptoms, including numbness, pain, and tingling in the upper extremities, shoulders, and neck. Eye strain and headaches have also been reported. In some cases, these symptoms can lead to chronic conditions such as repetitive strain injuries (RSI's). In an effort to prevent or minimize the frequency of these symptoms among the GSFC population, the IHO conducts individual ergonomic workstation evaluations and ergonomics training classes upon request. Because of the extensive number of computer workstations at GSFC, and the limited amount of manpower which the Industrial Hygiene staff could reasonably allocate to conduct workstation evaluations and employee training, a pamphlet was developed with a two-fold purpose: (1) to educate the GSFC population about the importance of ergonomically-correct computer workstation setup and the potential effects of a poorly configured workstation; and (2) to enable employees to perform a general assessment of their own workstations and make any necessary modifications for proper setup.

Technology meets ergonomics in the dental clinic: new toys for old games?

PubMed

Rucker, L M

2000-01-01

Although there have been considerable advances in dental equipment, the introduction of such technology has often been piecemeal and "rushed to market." As a result there has been insufficient attention paid to ergonomic considerations and a systematic approach to, and theory of, dental ergonomics have not yet emerged.

Learning effects in the lane change task (LCT)--realistic secondary tasks and transfer of learning.

PubMed

Petzoldt, Tibor; Brüggemann, Stephanie; Krems, Josef F

2014-05-01

Driver distraction is a factor that is heavily involved in traffic crashes. With in-vehicle devices like navigation systems or mobile phones on the rise, the assessment of their potential to distract the driver has become a pressing issue. Several easy-to-use methods have been developed in recent years to allow for such an assessment in the early stages of product development. One of these methods is the lane change task (LCT), a simple driving simulation in which the driver has to change lanes as indicated by different signs along the road. Although the LCT is an ISO sanctioned procedure, there are still open questions. One issue are learning effects which have been found in previous studies and which have the potential to compromise the comparability of test results. In this paper, we present results on two experiments that further explored the effect of previous experience on LCT and secondary task performance. The results confirm that learning effects occur when combining the LCT with a realistic secondary task. Also, we found evidence for the transfer of learning from one secondary task to another to some degree, provided that the two tasks are sufficiently similar. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The use of subjective rating of exertion in Ergonomics.

PubMed

Capodaglio, P

2002-01-01

In Ergonomics, the use of psychophysical methods for subjectively evaluating work tasks and determining acceptable loads has become more common. Daily activities at the work site are studied not only with physiological methods but also with perceptual estimation and production methods. The psychophysical methods are of special interest in field studies of short-term work tasks for which valid physiological measurements are difficult to obtain. The perceived exertion, difficulty and fatigue that a person experiences in a certain work situation is an important sign of a real or objective load. Measurement of the physical load with physiological parameters is not sufficient since it does not take into consideration the particular difficulty of the performance or the capacity of the individual. It is often difficult from technical and biomechanical analyses to understand the seriousness of a difficulty that a person experiences. Physiological determinations give important information, but they may be insufficient due to the technical problems in obtaining relevant but simple measurements for short-term activities or activities involving special movement patterns. Perceptual estimations using Borg's scales give important information because the severity of a task's difficulty depends on the individual doing the work. Observation is the most simple and used means to assess job demands. Other evaluations integrating observation are the followings: indirect estimation of energy expenditure based on prediction equations or direct measurement of oxygen consumption; measurements of forces, angles and biomechanical parameters; measurements of physiological and neurophysiological parameters during tasks. It is recommended that determinations of performances of occupational activities assess rating of perceived exertion and integrate these measurements of intensity levels with those of activity's type, duration and frequency. A better estimate of the degree of physical activity

Combining of ETHOS Operating Ergonomic Platform, Three-dimensional Laparoscopic Camera, and Radius Surgical System Manipulators Improves Ergonomy in Urologic Laparoscopy: Comparison with Conventional Laparoscopy and da Vinci in a Pelvi Trainer.

PubMed

Tokas, Theodoros; Gözen, Ali Serdar; Avgeris, Margaritis; Tschada, Alexandra; Fiedler, Marcel; Klein, Jan; Rassweiler, Jens

2017-10-01

Posture, vision, and instrumentation limitations are the main predicaments of conventional laparoscopy. To combine the ETHOS surgical chair, the three-dimensional laparoscope, and the Radius Surgical System manipulators, and compare the system with conventional laparoscopy and da Vinci in terms of task completion times and discomfort. Fifteen trainees performed the three main laparoscopic suturing tasks of the Heilbronn training program (IV: simulation of dorsal venous complex suturing; V: circular suturing of tubular structure; and VI: urethrovesical anastomosis) in a pelvi trainer. The tasks were performed conventionally, utilizing the three devices, and robotically. Task completion times were recorded and the surgeon discomfort was evaluated using questionnaires. Task completion times were compared using nonparametric Wilcoxon signed rank test and ergonomic scores were compared using Pearson chi-square test. The use of the full laparoscopic set (ETHOS chair, three-dimensional laparoscopic camera, Radius Surgical System needle holders), resulted in a significant improvement of the completion time of the three tested tasks compared with conventional laparoscopy (p<0.001) and similar to da Vinci surgery. After completing Tasks IV, V, and VI conventionally, 12 (80%), 13 (86.7%), and 13 (86.7%) of the 15 trainees, respectively, reported heavy total discomfort. The full laparoscopic system nullified heavy discomfort for Tasks IV and V and minimized it (6.7%) for the most demanding Task VI. Especially for Task VI, all trainees gained benefit, by using the system, in terms of task completion times and discomfort. The limited trainee robotic experience and the questionnaire subjectivity could be a potential limitation. The ergonomic laparoscopic system offers significantly improved task completion times and ergonomy than conventional laparoscopy. Furthermore, it demonstrates comparable results to robotic surgery. The study was conducted in a pelvi trainer and no patients

[Multiple mere exposure effect: category evaluation measured in the Go/No-go association task (GNAT)].

PubMed

Kawakami, Naoaki; Yoshida, Fujio

2011-12-01

The effect on likability of multiple subliminal exposures to the same person was investigated. Past studies on the mere exposure effect indicated a correlation between the frequency of repeated exposure to the same stimulus and likability. We proposed that exposure to various stimuli of the same person would have a stronger effect on likability. Participants were subliminally exposed to photographs of a person's face taken from seven angles (multi-angle-exposure) three times each (Experiment 1), or photographs of a person with seven facial expressions (multi-expression-exposure) three times each (Experiment 2). Then, the likability toward the exposed person was measured using the Go/No-go Association Task. The results indicated that the effect of the multiple exposures from various angles was equivalent to exposure to only one full-face photograph shown 21 times (Experiment 1). Moreover, likability was significantly higher in the case of exposure to various facial expressions than for exposure to only a single facial expression (Experiment 2). The results suggest that exposure to various stimuli in a category is more effective than repeated exposure to a single stimulus for increasing likability.

World War II and other historical influences on the formation of the Ergonomics Research Society.

PubMed

Waterson, Patrick

2011-12-01

Little has been written about wartime ergonomics and the role this played in prompting the need for a society dedicated to ergonomics within the UK, namely the formation of the Ergonomics Research Society (ERS) in early 1950. This article aims to fill this gap in our understanding of the history of ergonomics in the UK and provide further details of the types of research undertaken by wartime research groups and committees such as the Institute of Aviation Medicine, Medical Research Council Applied Psychology Unit and the Flying Personnel Research Committee. In addition, the role of societal developments such as wartime links with the USA, the post-war drive to increase productivity and collaboration with industry and the recommendations of government committees in stimulating the work of the ERS are described in detail. This article also offers some reflection on present-day ergonomics in the UK and how this contrasts with the past. STATEMENT OF RELEVANCE: This article will provide practitioners with a historical perspective on the development of ergonomics from its roots in the Second World War. These developments shed light on current trends and challenges within the discipline as a whole.

Electric versus hydraulic hospital beds: differences in use during basic nursing tasks.

PubMed

Capodaglio, Edda Maria

2013-01-01

Biomechanical, postural and ergonomic aspects during real patient-assisting tasks performed by nurses using an electric versus a hydraulic hospital bed were observed. While there were no differences in the flexed postures the nurses adopted, longer performance times were recorded when electric beds were used. Subjective effort, force exertion and lumbar shear forces exceeding safety limits proved electric beds were superior. Patients' dependency level seemed to influence the type of nurses' intervention (duration and force actions), irrespective of the bed used. The nurses greatly appreciated the electric bed. Its use seemed to reduce the level of effort perceived during care giving and the postural load during critical subtasks. Ergonomics and organizational problems related to adopting electric beds in hospital wards should be addressed further to make their use more efficient.

Removal of simulated biofilm: a preclinical ergonomic comparison of instruments and operators.

PubMed

Graetz, Christian; Plaumann, Anna; Rauschenbach, Sebastian; Bielfeldt, Jule; Dörfer, Christof E; Schwendicke, Falk

2016-07-01

Periodontal scaling might cause musculoskeletal disorders, and scaling instruments might not only have different effectiveness and efficiency but also differ in their ergonomic properties. The present study assessed ergonomic working patterns of experienced (EO) and less experienced operators (LO) when using hand and powered devices for periodontal scaling and root planning. In an experimental study using periodontally affected manikins, sonic (AIR), ultrasonic (TIG) and hand instruments (GRA) were used by 11 operators (7 EO/4 LO) during simulated supportive periodontal therapy. Using an electronic motion monitoring system, we objectively assessed the working frequency and positioning of hand, neck and head. Operators' subjective evaluation of the instruments was recorded using a questionnaire. Hand instruments were used with the lowest frequency (2.57 ± 1.08 s(-1)) but greatest wrist deviation (59.57 ± 53.94°). EO used instruments more specifically than LO, and generally worked more ergonomically, with less inclination of head and neck in both the frontal and sagittal planes, especially when using hand instruments. All groups found hand instruments more tiring and difficult to use than powered instruments. Regardless of operators' experience, powered instruments were used more ergonomically and were subjectively preferred compared to hand instruments. The use of hand instruments has potential ergonomic disadvantages. However, with increasing experience, operators are able to recognise and mitigate possible risks.

In-Session Exposure Tasks and Therapeutic Alliance across the Treatment of Childhood Anxiety Disorders

ERIC Educational Resources Information Center

Kendall, Philip C.; Comer, Jonathan S.; Marker, Craig D.; Creed, Torrey A.; Puliafico, Anthony C.; Hughes, Alicia A.; Martin, Erin D.; Suveg, Cynthia; Hudson, Jennifer

2009-01-01

The study examined the shape of therapeutic alliance using latent growth curve modeling and data from multiple informants (therapist, child, mother, father). Children (n = 86) with anxiety disorders were randomized to family-based cognitive-behavioral treatment (FCBT; N = 47) with exposure tasks or to family education, support, and attention…

Users/consumers differences regarding ergonomics and design theory and practice.

PubMed

Dejean, Pierre-Henri; Wagstaff, Peter

2012-01-01

This paper presents the concept of direct and indirect users, a key issue to cooperation between ergonomists, designers and managers involved in a sustainable approach to design. What issues for Ergonomics and Design are launched by this concept? User/consumer differences should be approached taking into account Ergonomics and Design theory and practice. What dialogue and tools could help the ergonomist/designer/manager to respond to all the requirements of the future clients of the product?

The effect of a knowledge-based ergonomic intervention amongst administrators at Aga Khan University Hospital, Nairobi.

PubMed

Wanyonyi, Nancy; Frantz, Jose; Saidi, Hassan

2015-01-01

Low back pain (LBP) and neck pain are part of the common work-related musculoskeletal disorders with a large impact on the affected person. Despite having a multifactorial aetiology, ergonomic factors play a major role thus necessitating workers' education. To determine the prevalence of ergonomic-related LBP and neck pain, and describe the effect of a knowledge-based ergonomic intervention amongst administrators in Aga Khan University Hospital, Nairobi. This study applied a mixed method design utilizing a survey and two focus group discussions (FGD). A self-administered questionnaire was distributed to 208 participants through systematic sampling. A one hour knowledge-based ergonomic session founded on the survey results was thereafter administered to interested participants, followed by two FGDs a month later with purposive selection of eight participants to explore their experience of the ergonomic intervention. Quantitative data was captured and analyzed using SPSS by means of descriptive and inferential statistics, whereas thematic content analysis was used for qualitative data. Most participants were knowledgeable about ergonomic-related LBP and neck pain with a twelve month prevalence of 75.5% and 67.8% respectively. Continual ergonomic education is necessary for adherence to health-related behaviours that will preventwork-related LBP and neck pain.

Global drivers, sustainable manufacturing and systems ergonomics.

PubMed

Siemieniuch, C E; Sinclair, M A; Henshaw, M J deC

2015-11-01

This paper briefly explores the expected impact of the 'Global Drivers' (such as population demographics, food security; energy security; community security and safety), and the role of sustainability engineering in mitigating the potential effects of these Global Drivers. The message of the paper is that sustainability requires a significant input from Ergonomics/Human Factors, but the profession needs some expansion in its thinking in order to make this contribution. Creating a future sustainable world in which people experience an acceptable way of life will not happen without a large input from manufacturing industry into all the Global Drivers, both in delivering products that meet sustainability criteria (such as durability, reliability, minimised material requirement and low energy consumption), and in developing sustainable processes to deliver products for sustainability (such as minimum waste, minimum emissions and low energy consumption). Appropriate changes are already being implemented in manufacturing industry, including new business models, new jobs and new skills. Considerable high-level planning around the world is in progress and is bringing about these changes; for example, there is the US 'Advanced Manufacturing National Program' (AMNP)', the German 'Industrie 4.0' plan, the French plan 'la nouvelle France industrielle' and the UK Foresight publications on the 'Future of Manufacturing'. All of these activities recognise the central part that humans will continue to play in the new manufacturing paradigms; however, they do not discuss many of the issues that systems ergonomics professionals acknowledge. This paper discusses a number of these issues, highlighting the need for some new thinking and knowledge capture by systems ergonomics professionals. Among these are ethical issues, job content and skills issues. Towards the end, there is a summary of knowledge extensions considered necessary in order that systems ergonomists can be fully

Ergonomics intervention on an alternative design of a spinal board.

PubMed

Zadry, Hilma Raimona; Susanti, Lusi; Rahmayanti, Dina

2017-09-01

A spinal board is the evacuation tool of first aid to help the injured spinal cord. The existing spinal board has several weaknesses, both in terms of user comfort and the effectiveness and efficiency of the evacuation process. This study designs an ergonomic spinal board using the quality function deployment approach. A preliminary survey was conducted through direct observation and interviews with volunteers from the Indonesian Red Cross. Data gathered were translated into a questionnaire and answered by 47 participants in West Sumatra. The results indicate that the selection of materials, the application of strap systems as well as the addition of features are very important in designing an ergonomic spinal board. The data were used in designing an ergonomic spinal board. The use of anthropometric data ensures that this product can accommodate safety and comfort when immobilized, as well as the flexibility and speed of the rescue evacuation process.

Sources and Nature of Secondary School Teachers' Education in Computer-Related Ergonomics

ERIC Educational Resources Information Center

Dockrell, Sara; Fallon, Enda; Kelly, Martina; Galvin, Rose

2009-01-01

Teachers' knowledge of computer-related ergonomics in education will have an effect on the learning process and the work practices of their students. However little is known about teacher education in this area. The study aimed to investigate the sources and nature of secondary school teachers' education about computer-related ergonomics. It also…

Nanomaterials in the field of design ergonomics: present status.

PubMed

Chowdhury, Anirban; Sanjog, J; Reddy, Swathi Matta; Karmakar, Sougata

2012-01-01

Application of nanotechnology and nanomaterials is not new in the field of design, but a recent trend of extensive use of nanomaterials in product and/or workplace design is drawing attention of design researchers all over the world. In the present paper, an attempt has been made to describe the diverse use of nanomaterials in product and workplace design with special emphasis on ergonomics (occupational health and safety; thermo-regulation and work efficiency, cognitive interface design; maintenance of workplace, etc.) to popularise the new discipline 'nanoergonomics' among designers, design users and design researchers. Nanoergonomics for sustainable product and workplace design by minimising occupational health risks has been felt by the authors to be an emerging research area in coming years. Use of nanomaterials in the field of design ergonomics is less explored till date. In the present review, an attempt has been made to extend general awareness among ergonomists/designers about applications of nanomaterials/nanotechnology in the field of design ergonomics and about health implications of nanomaterials during their use.

Ergonomic initiatives at Inmetro: measuring occupational health and safety.

PubMed

Drucker, L; Amaral, M; Carvalheira, C

2012-01-01

This work studies biomechanical hazards to which the workforce of Instituto Nacional de Metrologia, Qualidade e Tecnologia Industrial (Inmetro) is exposed. It suggests a model for ergonomic evaluation of work, based on the concepts of resilience engineering which take into consideration the institute's ability to manage risk and deal with its consequences. Methodology includes the stages of identification, inventory, analysis, and risk management. Diagnosis of the workplace uses as parameters the minimal criteria stated in Brazilian legislation. The approach has several prospectives and encompasses the points of view of public management, safety engineering, physical therapy and ergonomics-oriented design. The suggested solution integrates all aspects of the problem: biological, psychological, sociological and organizational. Results obtained from a pilot Project allow to build a significant sample of Inmetro's workforce, identifying problems and validating the methodology employed as a tool to be applied to the whole institution. Finally, this work intends to draw risk maps and support goals and methods based on resiliency engineering to assess environmental and ergonomic risk management.

Ergonomic evaluation of workload by milk production - a bibliometric analysis.

PubMed

de Oliveira, Claudilaine Caldas; Pereira Moro, Antônio Renato; Ulbricht, Leandra; Belinelli, Marjorie; de Souza, Gilberto F M; Gabriel, Michele; Zattar, Izabel Cristina

2017-09-21

The purpose of this study was to select in a structured manner the relevant articles with scientific recognition, and simultaneously identify the characteristics of these publications that may scientifically enrich the theme in a portfolio of papers. The theme involves ergonomics in milk production as a criterion for evaluating and improving organizational performance in the milking sector. The study used ProKnow-C as a theoretical instrument for intervention. The main results show: i) a bibliographic portfolio of 18 items aligned with the view adopted by researchers which served as a theoretical framework for this research; ii) The article entitled "Wrist positions and movements as possible risk factors during machine milking", by Marianne Stål, Gert-Åke Hansson and Ulrich Moritz in 1999 and published in the Journal of Applied Ergonomics presented the highest scientific recognition, iii) the authors highlighted in the bibliographic portfolio or in its references researching the subject are Gert-Åke Hansson, Marianne Stål and Stefan Pinzke, and iv) the International Journal of Industrial Ergonomics shows the highest number of scientific articles in the bibliographic portfolio. The studies selected using the methodology indicate research in ergonomics focused on the production of milk in rural areas, specifically in the milking sector, are generally related to the health and safety of the workers.

Ergonomics and safety in secondary wood processing

Treesearch

Rado Gazo; James D. McGlothlin; Yuehwern, Wiedenbeck, Jan Yih; Yuehwern Yih

2002-01-01

The main goal of the project was to initiate a pilot program in ergonomics for the secondary wood products industry. Case studies were conducted at three Midwest secondary wood product companies in 2000 and 2001.

Ergonomic problems encountered by the surgical team during video endoscopic surgery.

PubMed

Kaya, Oskay I; Moran, Munevver; Ozkardes, Alper B; Taskin, Emre Y; Seker, Gaye E; Ozmen, Mahir M

2008-02-01

The aim of this study is to analyze the problems related to the ergonomic conditions faced by video endoscopic surgical teams during video endoscopic surgery by means of a questionnaire. A questionnaire was distributed to 100 medical personnel, from 8 different disciplines, who performed video endoscopic surgeries. Participants were asked to answer 13 questions related to physical, perceptive, and cognitive problems. Eighty-two questionnaires were returned. Although there were differences among the disciplines, participants assessment of various problems ranged from 32% to 72% owing to poor ergonomic conditions. As the problems encountered by the staff during video endoscopic surgery and the poor ergonomic conditions of the operating room affect the productivity of the surgical team and the safety and efficiency of the surgery, redesigning of the instruments and the operating room is required.

Introduction to ergonomics for healthcare workers.

PubMed

Waters, Thomas R

2010-01-01

Healthcare workers who handle and move patients as part of their jobs suffer a disproportionately high number of work-related musculoskeletal disorders (MSDs). The majority of reported work-related MSDs are back pain cases that result in significant numbers of lost work days. It is likely that these lost workdays have a substantial impact on the quality and cost of health care. Patient care ergonomics can reduce the risk of work-related MSDs by helping safety experts design the work so it can be safely performed by most workers. This article provides a general overview of ergonomics--what it is, how it can be used to help design safe work, and why all healthcare workers and administrators should know and understand how excessive work demands can lead to increased risk of work-related MSDs. The article will also explain technological solutions that can be implemented to reduce the risk of work-related MSDs for healthcare workers.

Participatory ergonomic intervention versus strength training on chronic pain and work disability in slaughterhouse workers: study protocol for a single-blind, randomized controlled trial

PubMed Central

2013-01-01

Background The prevalence of musculoskeletal pain in the shoulder, arm and hand is high among slaughterhouse workers, allegedly due to the highly repetitive and forceful exposure of these body regions during work. Work disability is a common consequence of these pains. Lowering the physical exposure through ergonomics intervention is the traditional strategy to reduce the workload. An alternative strategy could be to increase physical capacity of the worker through strength training. This study investigates the effect of two contrasting interventions, participatory ergonomics versus strength training on pain and work disability in slaughterhouse workers with chronic pain. Methods/design 66 slaughterhouse workers were allocated to 10 weeks of (1) strength training of the shoulder, arm and hand muscles for 3 x 10 minutes per week, or (2) participatory ergonomics involving counseling on workstation adjustment and optimal use of work tools (~usual care control group). Inclusion criteria were (1) working at a slaughterhouse for at least 30 hours per week, (2) pain intensity in the shoulder, elbow/forearm, or hand/wrist of at least 3 on a 0–10 VAS scale during the last three months, (3) pain lasting for more than 3 months, (4) frequent pain (at least 3 days per week) (5) at least moderate work disability, (6) no strength training during the last year, (7) no ergonomics instruction during the last year. Perceived pain intensity (VAS scale 0–10) of the shoulder, elbow/forearm and hand/wrist (primary outcome) and Disability of the Arm, Shoulder and Hand (Work module, DASH questionnaire) were measured at baseline and 10-week follow-up. Further, total muscle tenderness score and muscle function were assessed during clinical examination at baseline and follow-up. Discussion This RCT study will provide experimental evidence of the effectiveness of contrasting work-site interventions aiming at reducing chronic pain and work disability among employees engaged in

Participatory ergonomic intervention versus strength training on chronic pain and work disability in slaughterhouse workers: study protocol for a single-blind, randomized controlled trial.

PubMed

Sundstrup, Emil; Jakobsen, Markus D; Andersen, Christoffer H; Jay, Kenneth; Persson, Roger; Aagaard, Per; Andersen, Lars L

2013-02-21

The prevalence of musculoskeletal pain in the shoulder, arm and hand is high among slaughterhouse workers, allegedly due to the highly repetitive and forceful exposure of these body regions during work. Work disability is a common consequence of these pains. Lowering the physical exposure through ergonomics intervention is the traditional strategy to reduce the workload. An alternative strategy could be to increase physical capacity of the worker through strength training. This study investigates the effect of two contrasting interventions, participatory ergonomics versus strength training on pain and work disability in slaughterhouse workers with chronic pain. 66 slaughterhouse workers were allocated to 10 weeks of (1) strength training of the shoulder, arm and hand muscles for 3 x 10 minutes per week, or (2) participatory ergonomics involving counseling on workstation adjustment and optimal use of work tools (~usual care control group). Inclusion criteria were (1) working at a slaughterhouse for at least 30 hours per week, (2) pain intensity in the shoulder, elbow/forearm, or hand/wrist of at least 3 on a 0-10 VAS scale during the last three months, (3) pain lasting for more than 3 months, (4) frequent pain (at least 3 days per week) (5) at least moderate work disability, (6) no strength training during the last year, (7) no ergonomics instruction during the last year.Perceived pain intensity (VAS scale 0-10) of the shoulder, elbow/forearm and hand/wrist (primary outcome) and Disability of the Arm, Shoulder and Hand (Work module, DASH questionnaire) were measured at baseline and 10-week follow-up. Further, total muscle tenderness score and muscle function were assessed during clinical examination at baseline and follow-up. This RCT study will provide experimental evidence of the effectiveness of contrasting work-site interventions aiming at reducing chronic pain and work disability among employees engaged in repetitive and forceful work. Clinical

Participatory ergonomics simulation of hospital work systems: The influence of simulation media on simulation outcome.

PubMed

Andersen, Simone Nyholm; Broberg, Ole

2015-11-01

Current application of work system simulation in participatory ergonomics (PE) design includes a variety of different simulation media. However, the actual influence of the media attributes on the simulation outcome has received less attention. This study investigates two simulation media: full-scale mock-ups and table-top models. The aim is to compare, how the media attributes of fidelity and affordance influence the ergonomics identification and evaluation in PE design of hospital work systems. The results illustrate, how the full-scale mock-ups' high fidelity of room layout and affordance of tool operation support ergonomics identification and evaluation related to the work system entities space and technologies & tools. The table-top models' high fidelity of function relations and affordance of a helicopter view support ergonomics identification and evaluation related to the entity organization. Furthermore, the study addresses the form of the identified and evaluated conditions, being either identified challenges or tangible design criteria. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Mapping ergonomics application to improve SMEs working condition in industrially developing countries: a critical review.

PubMed

Hermawati, Setia; Lawson, Glyn; Sutarto, Auditya Purwandini

2014-01-01

In industrially developing countries (IDC), small and medium enterprises (SMEs) account for the highest proprotion of employment. Unfortunately, the working conditions in SMEs are often very poor and expose employees to a potentially wide range of health and safety risks. This paper presents a comprehensive review of 161 articles related to ergonomics application in SMEs, using Indonesia as a case study. The aim of this paper is to investigate the extent of ergonomics application and identify areas that can be improved to promote effective ergonomics for SMEs in IDC. The most urgent issue found is the need for adopting participatory approach in contrast to the commonly implemented top-down approach. Some good practices in ergonomics application were also revealed from the review, e.g. a multidisciplinary approach, unsophisticated and low-cost solutions, and recognising the importance of productivity. The review also found that more work is still required to achieve appropriate cross-cultural adaptation of ergonomics application.

Ergonomic risk and preventive measures of musculoskeletal disorders in the dentistry environment: an umbrella review

PubMed Central

Traversini, Veronica; Rinaldo, Francesca; Colasanti, Valerio; Buomprisco, Giuseppe; Perri, Roberto; Mormone, Federica; La Torre, Giuseppe; Guerra, Fabrizio

2018-01-01

Introduction Dental practitioners are exposed to different occupational hazards during the course of their professional activity, such as physical, chemical, biological, ergonomic factors. The ergonomic hazards, caused by strained posture and prolonged repetitive movements, can induce musculoskeletal disorders. It occurs in 54–93% of dental professionals and involve the spine, shoulder and hand-wrist tract. Through a systematic review of international literature, we analyzed specific ergonomic risk factors and preventive measures of musculoskeletal disorders in professional dental activity. Methods This systematic review is coherent with the PRISMA statement. The scientific research on the major online databases was based on the following keywords: dentist, prevention, ergonomic, dentistry, musculoskeletal, neck pain, posture, ergonomics, work and occupational. The studies included in this review focus on disorders related to ergonomics and on the most effective preventive measures to be adopted. No restrictions were applied for language or publication type. We excluded reports not related to ergonomic prevention in dentistry, reports of minor academic significance, editorial articles, individual contributions, and studies published in scientific conferences. Results Online research indicated 4188 references: PubMed (2919), Scopus (1257) e Cochrane Library (12). We excluded 3012 of these, because they were unrelated to ergonomics theme and 187 due to duplication. From the remaining 989 studies, 960 papers did not meet inclusion criteria and they were excluded. Therefore, we analyzed 29 articles, including 16 narrative reviews and 13 original article. The main risk factor for the development of musculoskeletal disorders found in our analysis is static posture adopted during work, highlighted in 87.5% of reviews and 84% of original articles. With regard to preventive measures, 75% of the reviews highlighted the importance of stretching after each working session

Ergonomic risk and preventive measures of musculoskeletal disorders in the dentistry environment: an umbrella review.

PubMed

De Sio, Simone; Traversini, Veronica; Rinaldo, Francesca; Colasanti, Valerio; Buomprisco, Giuseppe; Perri, Roberto; Mormone, Federica; La Torre, Giuseppe; Guerra, Fabrizio

2018-01-01

Dental practitioners are exposed to different occupational hazards during the course of their professional activity, such as physical, chemical, biological, ergonomic factors. The ergonomic hazards, caused by strained posture and prolonged repetitive movements, can induce musculoskeletal disorders. It occurs in 54-93% of dental professionals and involve the spine, shoulder and hand-wrist tract. Through a systematic review of international literature, we analyzed specific ergonomic risk factors and preventive measures of musculoskeletal disorders in professional dental activity. This systematic review is coherent with the PRISMA statement. The scientific research on the major online databases was based on the following keywords: dentist, prevention, ergonomic, dentistry, musculoskeletal, neck pain, posture, ergonomics, work and occupational. The studies included in this review focus on disorders related to ergonomics and on the most effective preventive measures to be adopted. No restrictions were applied for language or publication type. We excluded reports not related to ergonomic prevention in dentistry, reports of minor academic significance, editorial articles, individual contributions, and studies published in scientific conferences. Online research indicated 4188 references: PubMed (2919), Scopus (1257) e Cochrane Library (12). We excluded 3012 of these, because they were unrelated to ergonomics theme and 187 due to duplication. From the remaining 989 studies, 960 papers did not meet inclusion criteria and they were excluded. Therefore, we analyzed 29 articles, including 16 narrative reviews and 13 original article. The main risk factor for the development of musculoskeletal disorders found in our analysis is static posture adopted during work, highlighted in 87.5% of reviews and 84% of original articles. With regard to preventive measures, 75% of the reviews highlighted the importance of stretching after each working session and at the end of the working day

An Assessment of Student Computer Ergonomic Knowledge.

ERIC Educational Resources Information Center

Alexander, Melody W.

1997-01-01

Business students (n=254) were assessed on their knowledge of computers, health and safety, radiation, workstations, and ergonomic techniques. Overall knowledge was low in all categories. In particular, they had not learned computer-use techniques. (SK)

Hysteresis in Mental Workload and Task Performance: The Influence of Demand Transitions and Task Prioritization.

PubMed

Jansen, Reinier J; Sawyer, Ben D; van Egmond, René; de Ridder, Huib; Hancock, Peter A

2016-12-01

We examine how transitions in task demand are manifested in mental workload and performance in a dual-task setting. Hysteresis has been defined as the ongoing influence of demand levels prior to a demand transition. Authors of previous studies predominantly examined hysteretic effects in terms of performance. However, little is known about the temporal development of hysteresis in mental workload. A simulated driving task was combined with an auditory memory task. Participants were instructed to prioritize driving or to prioritize both tasks equally. Three experimental conditions with low, high, and low task demands were constructed by manipulating the frequency of lane changing. Multiple measures of subjective mental workload were taken during experimental conditions. Contrary to our prediction, no hysteretic effects were found after the high- to low-demand transition. However, a hysteretic effect in mental workload was found within the high-demand condition, which degraded toward the end of the high condition. Priority instructions were not reflected in performance. Online assessment of both performance and mental workload demonstrates the transient nature of hysteretic effects. An explanation for the observed hysteretic effect in mental workload is offered in terms of effort regulation. An informed arrival at the scene is important in safety operations, but peaks in mental workload should be avoided to prevent buildup of fatigue. Therefore, communication technologies should incorporate the historical profile of task demand. © 2016, Human Factors and Ergonomics Society.