ERIC Educational Resources Information Center
United Nations Educational, Scientific, and Cultural Organization, Paris (France).
The international advisory committee of the International Project on Technical and Vocational Education (UNEVOC) held its third session in Paris in October 1995. Advisory committee members and observers from the United Nations' specialized, intergovernmental, and nongovernmental organizations reviewed the major UNEVOC project activities undertaken…
ERIC Educational Resources Information Center
United Nations Educational, Scientific, and Cultural Organization, Paris (France).
The international advisory committee of the International Project on Technical and Vocational Education (UNEVOC) held its second session in Paris in December 1994. Nine advisory committee members and observers from the United Nations' specialized, intergovernmental, and nongovernmental organizations reviewed the major UNEVOC project activities…
ERIC Educational Resources Information Center
United Nations Educational, Scientific, and Cultural Organization, Paris (France).
The international advisory committee of the International Project on Technical and Vocational Education (UNEVOC) held its first session in Berlin in September 1993. The advisory committee's 10 members and observers from the United Nations' specialized, intergovernmental, and nongovernmental organizations discussed educational policy, links between…
International Micrographics Standards: Report of the 1979 Paris Meeting of ISO/TC171.
ERIC Educational Resources Information Center
Heynen, Jeffrey
1980-01-01
Describes a meeting of the technical committee on micrographics of the International Organization for Standardization, and fcuses on the committee's work relating to the reproduction of library materials within the general context of international standards-making activities. (FM)
[Update to ISO 15189:2012, and future prospects].
Shimoda, Katsuji; Kubono, Katsuo
2014-06-01
ISO (the International Organization for Standardization) is a worldwide federation of national standard bodies (ISO member bodies). The work of preparing international standards is normally carried out through ISO technical committees. ISO 15189 was prepared by Technical Committee ISO/TC 212, clinical laboratory testing, and in vitro diagnostic test systems. This third edition replaces the second edition (ISO 15189:2007), which was technically revised. Medical laboratory services are essential for patient care and, therefore, have to be available to meet the needs of all patients and the clinical personnel responsible for the care of those patients.
Liu, Yu-Qi; Wang, Yue-Xi; Shi, Nan-Nan; Han, Xue-Jie; Lu, Ai-Ping
2017-05-01
To review the current situation and progress of traditional Chinese medicine (TCM) international standards, standard projects and proposals in International Organization for Standardization (ISO)/ technical committee (TC) 249. ISO/TC 249 standards and standard projects on the ISO website were searched and new standard proposals information were collected from ISO/TC 249 National Mirror Committee in China. Then all the available data were summarized in 5 closely related items, including proposed time, proposed country, assigned working group (WG), current stage and classifification. In ISO/TC 249, there were 2 international standards, 18 standard projects and 24 new standard proposals proposed in 2014. These 44 standard subjects increased year by year since 2011. Twenty-nine of them were proposed by China, 15 were assigned to WG 4, 36 were in preliminary and preparatory stage and 8 were categorized into 4 fifields, 7 groups and sub-groups based on International Classifification Standards. A rapid and steady development of international standardization in TCM can be observed in ISO/TC 249.
The standards process: X3 information processing systems
NASA Technical Reports Server (NTRS)
Emard, Jean-Paul
1993-01-01
The topics are presented in viewgraph form and include the following: International Organization for Standards (ISO); International Electrotechnical Committee (IEC); ISO/IEC Joint Technical Committee 1 (JTC-1); U.S. interface to JTC-1; ANSI; national organizations; U.S. standards development processes; national and international standards developing organizations; regional organizations; and X3 information processing systems.
77 FR 27060 - Federal Advisory Committee Act
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-08
...-15 Advisory Committee will continue to provide to the FCC advice, data, and technical analyses, and..., FCC International Bureau, Strategic Analysis and Negotiations Division, at (202) 418-7501. Email...
NASA Astrophysics Data System (ADS)
Evans, David J.
2002-11-01
The documentary standards defining internationally adopted methodologies and protocols for calibrating transducers used to measure vibration are currently developed under the International Organization for Standardization (ISO) Technical Committee 108 Sub Committee 3 (Use and calibration of vibration and shock measuring instruments). Recent revisions of the documentary standards on primary methods for the calibration of accelerometers used to measure rectilinear motion have been completed. These standards can be, and have been, used as references in the technical protocols of key international and regional comparisons between National Measurement Institutes (NMIs) on the calibration of accelerometers. These key comparisons are occurring in part as a result of the creation of the Mutual Recognition Arrangement between NMIs which has appendices that document the uncertainties, and the comparisons completed in support of the uncertainties, claimed by the National Laboratories that are signatories of the MRA. The measurements for the first international and the first Interamerican System of Metrology (SIM) regional key comparisons in vibration have been completed. These intercomparisons were promulgated via the relatively new Consultative Committee for Acoustics, Ultrasound and Vibration (CCAUV) of the International Committee for Weights and Measures (CIPM) and SIM Metrology Working Group (MWG) 9, respectively.
DEVELOPMENT OF INTERNATIONAL STANDARDS FOR AIR QUALITY MONITORING AND CONTROL
This report presents a description of the activities and accomplishments of the American Society for Testing and Materials' U. S. Technical Advisory Group (TAG) to the International Standards Organization's Technical Committee 146 on Air Quality. The purpose of the TAG is to re...
76 FR 33701 - Agricultural Technical Advisory Committees for Trade; Renewal
Federal Register 2010, 2011, 2012, 2013, 2014
2011-06-09
... technologies and international negotiations, are common within the U.S. planting seeds industry. The proposed... ensure that U.S. trade policy and negotiation objectives adequately reflect U.S. commercial and economic... President's Advisory Committee on Trade and Policy Negotiations; Five general policy advisory committees...
EPA STANDARDS NETWORK FACT SHEET: ISO 14000: INTERNATIONAL ENVIRONMENTAL MANAGEMENT STANDARDS
This flyer provides an overview of the ISO 14000 series of International standards, supplying a brief history, structure of the Technical Committee (TC) 207, structure of the U.S. Technical Advisory Group (TAG) to ISO TC-207, status of the Standards development as of June 1997, w...
Saito, S; Piccoli, B; Smith, M J; Sotoyama, M; Sweitzer, G; Villanueva, M B; Yoshitake, R
2000-10-01
In the 1980's, the visual display terminal (VDT) was introduced in workplaces of many countries. Soon thereafter, an upsurge in reported cases of related health problems, such as musculoskeletal disorders and eyestrain, was seen. Recently, the flat panel display or notebook personal computer (PC) became the most remarkable feature in modern workplaces with VDTs and even in homes. A proactive approach must be taken to avert foreseeable ergonomic and occupational health problems from the use of this new technology. Because of its distinct physical and optical characteristics, the ergonomic requirements for notebook PCs in terms of machine layout, workstation design, lighting conditions, among others, should be different from the CRT-based computers. The Japan Ergonomics Society (JES) technical committee came up with a set of guidelines for notebook PC use following exploratory discussions that dwelt on its ergonomic aspects. To keep in stride with this development, the Technical Committee on Human-Computer Interaction under the auspices of the International Ergonomics Association worked towards the international issuance of the guidelines. This paper unveils the result of this collaborative effort.
NASA Astrophysics Data System (ADS)
Cho, Young-Ho
2012-09-01
This special section of Journal of Micromechanics and Microengineering features papers selected from the 11th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2011), held at Sejong Hotel in Seoul, Korea during 15-18 November 2011. Since the first PowerMEMS workshop held in Sendai, Japan in 2000, the workshop has developed as the premier forum for reporting research results in micro and nanotechnology for power generation, energy conversion, harvesting and processing applications, including in-depth technical issues on nanostructures and materials for small-scale high-density energy and thermal management. Potential PowerMEMS applications cover not only portable power devices for consumer electronics and remote sensors, but also micro engines, impulsive thrusters and fuel cells for systems ranging from the nanometer to the millimeter scale. The 2011 technical program consists of 1 plenary talk, 4 invited talks and 118 contributed presentations. The 48 oral and 70 poster presentations, selected by 27 Technical Program Committee Members from 131 submitted abstracts, have stimulated lively discussion maximizing the interaction between participants. Among them, this special section includes 9 papers covering micro-scale power generators, energy converters, harvesters, thrusters and thermal coolers. Finally, we are grateful to the members of the International Steering Committee, the Technical Program Committee, and the Local Organizing Committee for their efforts and contributions to PowerMEMS 2011. We also thank the two companies Samsung Electro-Mechanics and LG Elite for technical tour arrangements. Special thanks go to Dr Ian Forbes, the editorial staff of the Journal of Micromechanics and Microengineering, as well as to the staff of IOP Publishing for making this special section possible.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Farnham, Irene; Rehfeldt, Kenneth
Preemptive reviews (PERs) of Underground Test Area (UGTA) Activity corrective action unit (CAU) studies are an important and long-maintained quality improvement process. The CAU-specific PER committees provide internal technical review of ongoing work throughout the CAU lifecycle. The reviews, identified in the UGTA Quality Assurance Plan (QAP) (Sections 1.3.5.1 and 3.2), assure work is comprehensive, accurate, in keeping with the state of the art, and consistent with CAU goals. PER committees review various products, including data, documents, software/codes, analyses, and models. PER committees may also review technical briefings including Federal Facility Agreement and Consent Order (FFACO)-required presentations to the Nevadamore » Division of Environmental Protection (NDEP) and presentations supporting key technical decisions (e.g., investigation plans and approaches). PER committees provide technical recommendations to support regulatory decisions that are the responsibility of the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) and NDEP.« less
NASA Technical Reports Server (NTRS)
Ong, C,; Mueller, A.; Thome, K.; Bachmann, M.; Czapla-Myers, J.; Holzwarth, S.; Khalsa, S. J.; Maclellan, C.; Malthus, T.; Nightingale, J.;
2016-01-01
Calibration and validation are fundamental for obtaining quantitative information from Earth Observation (EO) sensor data. Recognising this and the impending launch of at least five sensors in the next five years, the International Spaceborne Imaging Spectroscopy Technical Committee instigated a calibration and validation initiative. A workshop was conducted recently as part of this initiative with the objective of establishing a good practice framework for radiometric and spectral calibration and validation in support of spaceborne imaging spectroscopy missions. This paper presents the outcomes and recommendations for future work arising from the workshop.
NWTC Engineer Wins Prestigious International Electrotechnical Commission
IEC TC88, the technical committee responsible for writing the international standards for wind energy levels of safety and by defining test methods that provide high-quality, reproducible test results."
DOE Office of Scientific and Technical Information (OSTI.GOV)
Buican, I.; Hriscu, V.; Amador, M.
For the past four and a half years, the International Communication Committee at Los Alamos National Laboratory has been working to develop a set of guidelines for writing technical and scientific documents in International English, that is, English for those whose native language is not English. Originally designed for documents intended for presentation in English to an international audience of technical experts, the International English guidelines apply equally well to the preparation of English text for translation. This is the second workshop in a series devoted to the topic of translation. The authors focus on the advantages of using Internationalmore » English, rather than various methods of simplifying language, to prepare scientific and technical text for translation.« less
48 CFR 715.303-70 - Responsibilities of USAID evaluation committees.
Code of Federal Regulations, 2011 CFR
2011-10-01
... INTERNATIONAL DEVELOPMENT CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Source Selection 715..., a representative of the contracting office (who shall be a non-voting member of the committee), and... contracting officer will receive all proposals and provide to the chair a listing and copies of the technical...
Orbital debris: A technical assessment
NASA Technical Reports Server (NTRS)
Gleghorn, George; Asay, James; Atkinson, Dale; Flury, Walter; Johnson, Nicholas; Kessler, Donald; Knowles, Stephen; Rex, Dietrich; Toda, Susumu; Veniaminov, Stanislav
1995-01-01
To acquire an unbiased technical assessment of (1) the research needed to better understand the debris environment, (2) the necessity and means of protecting spacecraft against the debris environment, and (3) potential methods of reducing the future debris hazard, NASA asked the National Research Council to form an international committee to examine the orbital debris issue. The committee was asked to draw upon available data and analyses to: characterize the current debris environment, project how this environment might change in the absence of new measures to alleviate debris proliferation, examine ongoing alleviation activities, explore measures to address the problem, and develop recommendations on technical methods to address the problems of debris proliferation.
Standards 101; the ASA standards program
NASA Astrophysics Data System (ADS)
Schomer, Paul D.
2002-11-01
ASA supports the development of standards by serving as the secretariat for standards committees of the American National Standards Institute (ANSI). The program is organized through four ANSI technical committees (S1, S2, S3, and S12) and one administrative committee (ASACOS). S1 deals with physical acoustics, S2 deals with shock and vibration, S3 deals with physiological and psychological acoustics, and S12 deals with noise. ASACOS is the ASA Committee on Standards. The program has three primary tasks: (1) the development of National Standards (ANSI Standards), (2) the national adoption of an international standard (ANSI NAIS Standards), (3) providing the USA input to the development of International Standards (ISO and IEC Standards). At every level the main work is accomplished in Working Groups (WG) that are ''staffed'' by hundreds of volunteers--mainly ASA members from its various technical committees such as Noise, Physical Acoustics, Architectural Acoustics, Psychological and Physiological Acoustics, etc. Overall, the Standards Program involves more ASA members than does any other single function of the Society except meetings and it is the biggest outreach function of ASA affecting the health, welfare, and economic well-being of large segments of the population, the business and industrial community, and government at all levels.
Reilly, J Patrick; Hirata, Akimasa
2016-06-21
This article treats unsettled issues in the use of numerical models of electrical dosimetry as applied to international limits on human exposure to low-frequency (typically < 100 kHz) electromagnetic fields and contact current. The perspective in this publication is that of Subcommittee 6 of IEEE-ICES (International Committee on Electromagnetic Safety) Technical Committee 95. The paper discusses 25 issues needing attention, fitting into three general categories: induction models; electrostimulation models; and human exposure limits. Of these, 9 were voted as 'high priority' by members of Subcommittee 6. The list is presented as a research agenda for refinements in numerical modeling with applications to human exposure limits. It is likely that such issues are also important in medical and electrical product safety design applications.
Standards 101: The ASA Standards program
NASA Astrophysics Data System (ADS)
Schomer, Paul
2004-05-01
ASA serves as a standards developer under the auspices of the American National Standards Institute (ANSI). The Standards Program is organized through four technical committees (S1, S2, S3, and S12) and one administrative committee (ASACOS). S1 deals with physical acoustics, S2 deals with shock and vibration, S3 deals with physiological and psychological acoustics and S12 deals with noise. ASACOS is the ASA Committee on Standards. The program has three primary tasks: (1) development of national standards (ANSI Standards), (2) national adoption of international standards (ANSI NAIS Standards), (3) providing the USA input to the development of international standards (ISO and IEC Standards). At every level the main work is accomplished in Working Groups (WG) that are staffed by hundreds of volunteers, mainly ASA members from its various technical committees such as Noise, Physical Acoustics, Architectural Acoustics, Physiological and Psychological Acoustics, etc. Overall, the Standards Program involves more ASA members than does any other single function of the society except meetings. It is the biggest outreach function of ASA affecting the health, welfare, and economic well-being of large sectors of society. It is a main way the ASA diffuses the knowledge of acoustics and its practical application, perhaps the main way.
This presentation provides a brief update on activities of ISO (International Organization for Standardization) TC (Technical Committee) 285, Clean Cooking Solutions. Slides include information on: (1) Working Group project status updates, (2) background on laboratory and field ...
The United Nations contribution towards an international agreement on remote sensing
NASA Technical Reports Server (NTRS)
Menter, M.
1976-01-01
The recommendations of the Legal Subcommittee of the United Nations committee for the Peaceful Uses of Space concerning satellite remote sensing are considered. Detailed studies of the Scientific and Technical Subcommittee of this committee are discussed with emphasis on three draft proposals submitted to it on remote sensing by (1) France and the USSR, (2) Latin American countries, and (3) the United States.
NASA Astrophysics Data System (ADS)
Mory, Robert
A number of tables present the principal historical details of the IAF from 1951 to 1991: International Astronautical Congresses, Member Organizations, Presidents and Vice-Presidents, General Counsels, Executive Secretaries, Headquarters' Secretariats and Administrative and Technical Committees.
77 FR 43808 - Advisory Committee and Species Working Group Technical Advisor Appointment
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-26
... sent via email ( Rachel.O'Malley@noaa.gov ). In the alternative, nominations may be sent via mail to Rachel O'Malley at NMFS, Office of International Affairs, Room 12622, 1315 East-West Highway, Silver Spring, MD 20910. FOR FURTHER INFORMATION CONTACT: Rachel O'Malley, Office of International Affairs, 301...
78 FR 60866 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)
Federal Register 2010, 2011, 2012, 2013, 2014
2013-10-02
... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Office of...: This notice announces an open meeting of the Hydrogen and Fuel Cell Technical Advisory Committee (HTAC... Committee: The Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) was established under section 807...
The standards process: Technical committee X3B5 digital magnetic tape
NASA Technical Reports Server (NTRS)
Cheatham, Sam
1993-01-01
The definition of X3B5, where it fits in the national and international standards development process, and how it interfaces and influences the world community of standards developers are provided. Details concerning the focus of the committee, how it operates, and what the group sees as the future trends in the area of interchange standards utilizing the multifaceted, ubiquitous magnetic tape are presented.
NASA Technical Reports Server (NTRS)
Jenkins, Michael G.; Salem, Jonathan A.
2016-01-01
Physical and mechanical properties and performance of advanced ceramics and glasses are difficult to measure correctly without the proper techniques. For over three decades, ASTM Committee C28 on Advanced Ceramics, has developed high-quality, technically-rigorous, full-consensus standards (e.g., test methods, practices, guides, terminology) to measure properties and performance of monolithic and composite ceramics that may be applied to glasses in some cases. These standards contain testing particulars for many mechanical, physical, thermal, properties and performance of these materials. As a result these standards are used to generate accurate, reliable, repeatable and complete data. Within Committee C28, users, producers, researchers, designers, academicians, etc. have written, continually updated, and validated through round-robin test programs, 50 standards since the Committee's founding in 1986. This paper provides a detailed retrospective of the 30 years of ASTM Committee C28 including a graphical pictogram listing of C28 standards along with examples of the tangible benefits of standards for advanced ceramics to demonstrate their practical applications.
ERIC Educational Resources Information Center
Idaho State Dept. of Education, Boise. Div. of Vocational Education.
Under the Idaho state system for curriculum development in vocational education, Technical Committees made up solely of industry personnel are responsible for drawing up task lists for each program. A Technical Committee Report is prepared on completion of the committees assignment. This Technical Committee Report presents a task list that…
International Program and Local Organizing Committees
NASA Astrophysics Data System (ADS)
2012-12-01
International Program Committee Dionisio Bermejo (Spain) Roman Ciurylo (Poland) Elisabeth Dalimier (France) Alexander Devdariani (Russia) Milan S Dimitrijevic (Serbia) Robert Gamache (USA) Marco A Gigosos (Spain) Motoshi Goto (Japan) Magnus Gustafsson (Sweden) Jean-Michel Hartmann (France) Carlos Iglesias (USA) John Kielkopf (USA) John C Lewis (Canada) Valery Lisitsa (Russia) Eugene Oks (USA) Christian G Parigger (USA) Gillian Peach (UK) Adriana Predoi-Cross (Canada) Roland Stamm (Germany) Local Organizing Committee Nikolay G Skvortsov (Chair, St Petersburg State University) Evgenii B Aleksandrov (Ioffe Physico-Technical Institute, St Petersburg) Vadim A Alekseev (Scientific Secretary, St Petersburg State University) Sergey F Boureiko (St.Petersburg State University) Yury N Gnedin (Pulkovo Observatory, St Petersburg) Alexander Z Devdariani (Deputy Chair, St Petersburg State University) Alexander P Kouzov (Deputy Chair, St Petersburg State University) Nikolay A Timofeev (St Petersburg State University)
Code of Federal Regulations, 2010 CFR
2010-04-01
... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...
Code of Federal Regulations, 2011 CFR
2011-04-01
... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...
Code of Federal Regulations, 2012 CFR
2012-04-01
... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...
Code of Federal Regulations, 2014 CFR
2014-04-01
... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...
Code of Federal Regulations, 2013 CFR
2013-04-01
... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...
First International Symposium on Strain Gauge Balances. Pt. 1
NASA Technical Reports Server (NTRS)
Tripp, John S. (Editor); Tcheng, Ping (Editor)
1999-01-01
The first International Symposium on Strain Gauge Balances was sponsored and held at NASA Langley Research Center during October 22-25, 1996. The symposium provided an open international forum for presentation, discussion, and exchange of technical information among wind tunnel test technique specialists and strain gauge balance designers. The Symposium also served to initiate organized professional activities among the participating and relevant international technical communities. Over 130 delegates from 15 countries were in attendance. The program opened with a panel discussion, followed by technical paper sessions, and guided tours of the National Transonic Facility (NTF) wind tunnel, a local commercial balance fabrication facility, and the LaRC balance calibration laboratory. The opening panel discussion addressed "Future Trends in Balance Development and Applications." Forty-six technical papers were presented in 11 technical sessions covering the following areas: calibration, automatic calibration, data reduction, facility reports, design, accuracy and uncertainty analysis, strain gauges, instrumentation, balance design, thermal effects, finite element analysis, applications, and special balances. At the conclusion of the Symposium, a steering committee representing most of the nations and several U.S. organizations attending the Symposium was established to initiate planning for a second international balance symposium, to be held in 1999 in the UK.
First International Symposium on Strain Gauge Balances. Part 2
NASA Technical Reports Server (NTRS)
Tripp, John S (Editor); Tcheng, Ping (Editor)
1999-01-01
The first International Symposium on Strain Gauge Balances was sponsored and held at NASA Langley Research Center during October 22-25, 1996. The symposium provided an open international forum for presentation, discussion, and exchange of technical information among wind tunnel test technique specialists and strain gauge balance designers. The Symposium also served to initiate organized professional activities among the participating and relevant international technical communities. Over 130 delegates from 15 countries were in attendance. The program opened with a panel discussion, followed by technical paper sessions, and guided tours of the National Transonic Facility (NTF) wind tunnel, a local commercial balance fabrication facility, and the LaRC balance calibration laboratory. The opening panel discussion addressed "Future Trends in Balance Development and Applications." Forty-six technical papers were presented in 11 technical sessions covering the following areas: calibration, automatic calibration, data reduction, facility reports, design, accuracy and uncertainty analysis, strain gauges, instrumentation, balance design, thermal effects, finite element analysis, applications, and special balances. At the conclusion of the Symposium, a steering committee representing most of the nations and several U.S. organizations attending the Symposium was established to initiate planning for a second international balance symposium, to be held in 1999 in the UK.
Education in Soil Science: the Italian approach
NASA Astrophysics Data System (ADS)
Benedetti, Anna; Canfora, Loredana; Dazzi, Carmelo; Lo Papa, Giuseppe
2017-04-01
The Italian Society of Soil Science (SISS) was founded in Florence on February 18th, 1952. It is an association legally acknowledged by Decree of the President of the Italian Republic in February 1957. The Society is member of the International Union of Soil Sciences (IUSS) of the European Confederation of Soil Science Societies (ECSSS) and collaborates with several companies, institutions and organizations having similar objectives or policy aspects. SISS promotes progress, coordination and dissemination of soil science and its applications encouraging relationships and collaborations among soil lovers. Within the SISS there are Working Groups and Technical Committees for specific issues of interest. In particular: • the Working Group on Pedotechniques; • the Working Group on Hydromorphic and Subaqueous Soils and • the Technical Committee for Soil Education and Public Awareness. In this communication we wish to stress the activities developed since its foundation by SISS to spread soil awareness and education in Italy through this last Technical Committee, focusing also the aspect concerning grants for young graduates and PhD graduates to stimulate the involvement of young people in the field of soil science. Keywords: SISS, soil education and awareness.
Issues concerning international comparison of free-field calibrations of acoustical standards
NASA Astrophysics Data System (ADS)
Nedzelnitsky, Victor
2002-11-01
Primary free-field calibrations of laboratory standard microphones by the reciprocity method establish these microphones as reference standard devices for calibrating working standard microphones, other measuring microphones, and practical instruments such as sound level meters and personal sound exposure meters (noise dosimeters). These primary, secondary, and other calibrations are indispensable to the support of regulatory requirements, standards, and product characterization and quality control procedures important for industry, commerce, health, and safety. International Electrotechnical Commission (IEC) Technical Committee 29 Electroacoustics produces international documentary standards, including standards for primary and secondary free-field calibration and measurement procedures and their critically important application to practical instruments. This paper addresses some issues concerning calibrations, standards activities, and the international key comparison of primary free-field calibrations of IEC-type LS2 laboratory standard microphones that is being planned by the Consultative Committee for Acoustics, Ultrasound, and Vibration (CCAUV) of the International Committee for Weights and Measures (CIPM). This comparison will include free-field calibrations by the reciprocity method at participating major national metrology laboratories throughout the world.
Legal and ethical issues in research.
Yip, Camille; Han, Nian-Lin Reena; Sng, Ban Leong
2016-09-01
Legal and ethical issues form an important component of modern research, related to the subject and researcher. This article seeks to briefly review the various international guidelines and regulations that exist on issues related to informed consent, confidentiality, providing incentives and various forms of research misconduct. Relevant original publications (The Declaration of Helsinki, Belmont Report, Council for International Organisations of Medical Sciences/World Health Organisation International Guidelines for Biomedical Research Involving Human Subjects, World Association of Medical Editors Recommendations on Publication Ethics Policies, International Committee of Medical Journal Editors, CoSE White Paper, International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use-Good Clinical Practice) form the literature that are relevant to the ethical and legal aspects of conducting research that researchers should abide by when conducting translational and clinical research. Researchers should note the major international guidelines and regional differences in legislation. Hence, specific ethical advice should be sought at local Ethics Review Committees.
77 FR 18243 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC); Notice of Open Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-27
... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC); Notice of Open... open meeting. SUMMARY: This notice announces a meeting of the Hydrogen and Fuel Cell Technical Advisory... Committee: The Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) was established under Section 807...
A Survey of Technical Standards for Command and Control Information Systems
1991-09-01
H-1 Appendix I Status of Work on Lower-Layer OSI STANAGS ................ I-1 Appendix J Status of NATO OSI STANAGS ...standards efforts for use of open systems in international military systems. Thus, TSGCE SG9 draft standardization agreements ( STANAGs ), NATO...Work in NATO OSI STANAGs for the Use of Open- --- I ISystems9 References I Acronyms Index JTC: Joint Technical Committee SC: Subcommittee Figure 1
ERIC Educational Resources Information Center
Cylke, Frank Kurt
Two meetings of the International Federation of Library Associations Section of Libraries for the Blind (BLISTA) are summarized. The first was an expert meeting which was held in Marburg/Lahn, Federal Republic of Germany, in August 1983. Participants included 51 librarians and technical experts serving blind and physically disabled individuals in…
Ergonomics for Children and Educational Environments - Around the World
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bennett, C L; Tien, D
2003-06-25
This paper briefly reviews activities and research related to children and educational environments. The increasing prevalence and role of information and communications technology in the lives of children as well as the incidence of back pain and heavy loads children carry in back packs are raising concerns around the world. Out of this concern an International Ergonomics Association Technical Committee has been formed. A survey was sent to Ergonomics for Children and Educational Environments membership and those who have communicated through the committee. The results are compiled to describe a cross-section of international efforts to address the health and themore » future of children.« less
USDA-ARS?s Scientific Manuscript database
The Dictionary of Cotton has over 2,000 terms and definitions that were compiled by 33 researchers. It reflects the ongoing commitment of the International Cotton Advisory Committee, through its Technical Information Section, to the spread of knowledge about cotton to all those who have an interest ...
Interpretation of benzene biomarkers of exposure for risk assessment
Human biomarkers of exposure such as parent or metabolite concentrations in blood or urine are often reported without any context to the sources of exposure or the implications for human risk. The Biomonitoring Technical Committee of the International Life Sciences Institute/Huma...
2009-10-01
The Committee on Man and Radiation (COMAR) is a technical committee of the Engineering in Medicine and Biology Society (EMBS) of the Institute of Electrical and Electronics Engineers (IEEE). Its primary area of interest is biological effects of non-ionizing electromagnetic radiation, including radiofrequency (RF) energy. The public interest in possible health effects attributed to RF energy, such as emitted by mobile phones, wireless telephone base stations, TV and radio broadcasting facilities, Wi-Fi systems and many other sources, has been accompanied by commentary in the media that varies considerably in reliability and usefulness for their audience. The focus of this COMAR Technical Information Statement is to identify quality sources of scientific information on potential health risks from exposure to RF energy. This Statement provides readers with references to expert reports and other reliable sources of information about this topic, most of which are available on the Internet. This report summarizes the conclusions from several major reports and comments on the markedly different conclusions in the BioInitiative Report (abbreviated BIR below). Since appearing on the Internet in August 2007, the BIR has received much media attention but, more recently, has been criticized by several health organizations (see Section titled "Views of health agencies about BIR"). COMAR concludes that the weight of scientific evidence in the RF bioeffects literature does not support the safety limits recommended by the BioInitiative group. For this reason, COMAR recommends that public health officials continue to base their policies on RF safety limits recommended by established and sanctioned international organizations such as the Institute of Electrical and Electronics Engineers International Committee on Electromagnetic Safety and the International Commission on Non-Ionizing Radiation Protection, which is formally related to the World Health Organization.
75 FR 20817 - Information Systems Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-21
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... Administration on technical questions that affect the level of export controls applicable to information systems...
Standardization by ISO to Ensure the Sustainability of Space Activities
NASA Astrophysics Data System (ADS)
Kato, A.; Lazare, B.; Oltrogge, D.; Stokes, H.
2013-08-01
The ISO / Technical Committee 20 / Sub-committee 14 develops debris-related standards and technical reports to mitigate debris and help ensure mission and space sustainability. While UN Guidelines and the IADC Guidelines encourage national governments and agencies to promote debris mitigation design and operation, the ISO standards will help the global space industry promote and sustain its space-related business. In this paper the scope and status of each ISO standard is discussed within an overall framework. A comparison with international guidelines is also provided to demonstrate the level of consistency. Finally, as a case study, the ISO standards are applied to a CubeSat mission, thus demonstrating their usability on a relatively recent and popular class of satellite.
48 CFR 715.303-70 - Responsibilities of USAID evaluation committees.
Code of Federal Regulations, 2010 CFR
2010-10-01
... evaluation committees. A technical evaluation committee shall be established for each proposed procurement. In each case, the committee shall be composed of a chair representing the cognizant technical office... representatives from other concerned offices as appropriate. (b) Technical evaluation procedures. (1) The...
78 FR 18578 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-27
... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Hydrogen and Fuel Cell... and Fuel Cell Technical Advisory Committee (HTAC). The Federal Advisory Committee Act, Public Law 92... Cell Technical Advisory Committee (HTAC) was established under section 807 of the Energy Policy Act of...
Thibier, M; Stringfellow, D A
2003-02-01
The International Embryo Transfer Society (IETS) was founded in 1974. Early members used the society as a forum for the exchange of scientific and technical information relevant to a newly emerging embryo transfer industry. The impact that embryo transfer could have on the international trade of livestock genetics was clear by 1982, so the IETS commissioned the Import/Export Committee. The initial challenge for this Committee was to deal with concerns about disease transmission via embryo transfer. Many of the early concerns have been dispelled, but at the time they threatened the continued development of a fledgling industry. Over the past two decades, many new critical challenges have been met and managed by this Committee, which was recently renamed the Health and Safety Advisory Committee (HASAC). Assessing risks of animal disease transmission via reproductive technologies and establishing protocols for managing these risks are still major issues for HASAC. However, additional concerns have developed as views of the society changed and as novel applications of biotechnology in farm animals were identified. This paper is intended to chronicle some of the major changes and challenges that were managed by members of the HASAC and its Subcommittees from the early years of embryo transfer to the current millennium with technological advances in molecular biology.
7 CFR 1728.50 - Removal of an item from listing or technical acceptance.
Code of Federal Regulations, 2010 CFR
2010-01-01
... equipment will be notified in writing of a proposal to remove such item from the listing or technical... unanimous, the item will be referred to Technical Standards Committee “B.” Written notice of Technical...” decision, a sponsor may appeal in writing to Technical Standards Committee “B” to review Committee “A's...
77 FR 50488 - Hydrogen and Fuel Cell Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-21
... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee AGENCY: Department of...). SUMMARY: This notice announces an open meeting (Webinar) of the Hydrogen and Fuel Cell Technical Advisory... Cell Technical Advisory Committee (HTAC) was established under Section 807 of the Energy Policy Act of...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-21
... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0127] Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials...
Biomarkers of benzene exposure and their interpretation for human health risk assessment
Human biomarkers of exposure such as parent or metabolite concentrations in blood or urine are often reported without any context to the sources of exposure or the implications for human risk. The Biomonitoring Technical Committee of the International Life Sciences Institute/Huma...
News from the Biological Stain Commission.
Lyon, H O; Kiernan, J A
2008-12-01
In the three earlier editions of News from the Biological Stain Commission (BSC), under the heading of "Regulatory affairs," the BSC's International Affairs Committee reported on the work of Technical Committee 212, Clinical Laboratory Testing and in Vitro Diagnostic Test Systems of the International Standards Organization (ISO/TC 212) and its working groups, WG 1, WG 2 and WG 3. In this issue of News from the BSC, H.O. Lyon provides information from the annual meeting of ISO/TC 212 that took place June 2-4, 2008 in Vancouver, British Columbia, Canada. In addition, under the heading of "Certification," J.A. Kiernan examines the certification procedure for thionine used by the BSC laboratory in Rochester, NY.
78 FR 6086 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-29
... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Office of...). SUMMARY: This notice announces an open meeting (Webinar) of the Hydrogen and Fuel Cell Technical Advisory... Cell Technical Advisory Committee (HTAC) was established under Section 807 of the Energy Policy Act of...
78 FR 31976 - Bureau of Labor Statistics Technical Advisory Committee; Notice of Meeting and Agenda
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-28
... DEPARTMENT OF LABOR Bureau of Labor Statistics Bureau of Labor Statistics Technical Advisory Committee; Notice of Meeting and Agenda The Bureau of Labor Statistics Technical Advisory Committee will... Labor Statistics (BLS) on technical aspects of the collection and formulation of economic measures. The...
77 FR 27252 - Bureau of Labor Statistics Technical Advisory Committee; Notice of Meeting and Agenda
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-09
... DEPARTMENT OF LABOR Bureau of Labor Statistics Bureau of Labor Statistics Technical Advisory Committee; Notice of Meeting and Agenda The Bureau of Labor Statistics Technical Advisory Committee will... Labor Statistics (BLS) on technical aspects of the collection and formulation of economic measures. The...
NASA Astrophysics Data System (ADS)
Summerer, Leopold
2014-08-01
In 2009, the International Safety Framework for Nuclear Power Source Applications in Outer Space [1] has been adopted, following a multi-year process that involved all major space faring nations in the frame of the International Atomic Energy Agency and the UN Committee on the Peaceful Uses of Outer Space. The safety framework reflects an international consensus on best practices. After the older 1992 Principles Relevant to the Use of Nuclear Power Sources in Outer Space, it is the second document at UN level dedicated entirely to space nuclear power sources.This paper analyses aspects of the safety framework relevant for the design and development phases of space nuclear power sources. While early publications have started analysing the legal aspects of the safety framework, its technical guidance has not yet been subject to scholarly articles. The present paper therefore focuses on the technical guidance provided in the safety framework, in an attempt to assist engineers and practitioners to benefit from these.
Legal and ethical issues in research
Yip, Camille; Han, Nian-Lin Reena; Sng, Ban Leong
2016-01-01
Legal and ethical issues form an important component of modern research, related to the subject and researcher. This article seeks to briefly review the various international guidelines and regulations that exist on issues related to informed consent, confidentiality, providing incentives and various forms of research misconduct. Relevant original publications (The Declaration of Helsinki, Belmont Report, Council for International Organisations of Medical Sciences/World Health Organisation International Guidelines for Biomedical Research Involving Human Subjects, World Association of Medical Editors Recommendations on Publication Ethics Policies, International Committee of Medical Journal Editors, CoSE White Paper, International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use-Good Clinical Practice) form the literature that are relevant to the ethical and legal aspects of conducting research that researchers should abide by when conducting translational and clinical research. Researchers should note the major international guidelines and regional differences in legislation. Hence, specific ethical advice should be sought at local Ethics Review Committees. PMID:27729698
77 FR 64464 - Information Systems Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-22
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC... of export controls applicable to information systems equipment and technology. Wednesday, November 7...
75 FR 51239 - Census Scientific Advisory Committee; Notice of Public Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-19
... Advisory Committee (C-SAC). The Committee will address policy, research, and technical issues relating to a.... The Committee provides scientific and technical expertise, as appropriate, to address Census Bureau...
76 FR 36102 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2011-06-21
... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development... vacancies on the Biomass Research and Development Technical Advisory Committee (Technical Advisory Committee... 20585; (202) 586-7766; E-mail: [email protected] . SUPPLEMENTARY INFORMATION: The Biomass Research...
78 FR 64932 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2013-10-30
... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY: Energy... announces an open meeting of the Biomass Research and Development Technical Advisory Committee under Section... allow for public participation. This notice announces the meeting of the Biomass Research and...
76 FR 39845 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-07
... export controls applicable to information systems equipment and technology. Wednesday, July 27 Public... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC...
78 FR 63162 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-10-23
... of export controls applicable to information systems equipment and technology. Wednesday, November 6... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC...
75 FR 64258 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-19
... export controls applicable to information systems equipment and technology. Wednesday, November 3 Public... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC...
78 FR 42753 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-17
... of export controls applicable to information systems equipment and technology. Wednesday, July 31... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC...
77 FR 42298 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-18
... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development...: Notice of Solicitation of Nominations for Appointment as a Member of the Biomass Research and Development... Biomass Research and Development Technical Advisory Committee (Technical Advisory Committee). DATES: The...
U.S. National Committee for CODATA. Final technical report: September 15, 1996 to September 14, 2000
DOE Office of Scientific and Technical Information (OSTI.GOV)
Uhlir, Paul F.
2001-01-26
This report describes the activities of the U.S. National Committee (USNC) for CODATA from September 16, 1996, through September 14, 2000. The USNC/CODATA counsels the U.S. National Delegate to CODATA on the U.S. position regarding official CODATA business. It also provides a link between the United States and international data compilation and evaluation activities, taking into account the needs of the scientific and technological user community, and undertakes special studies and other actions consistent with the overall CODATA objectives.
76 FR 4645 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-26
... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Department...: This notice announces a meeting of the Hydrogen and Fuel Cell Technical Advisory Committee (HTAC). HTAC... Presentations HTAC Subcommittee Overviews HTAC Annual Report Development Stationary Fuel Cell Industry Analysis...
77 FR 37652 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-22
... that affect the level of export controls applicable to information systems equipment and technology... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC...
77 FR 6791 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-09
... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY: Energy... announces an open meeting of the Biomass Research and Development Technical Advisory Committee. The Federal... leading to the production of biobased fuels and biobased products. Tentative Agenda Update on USDA Biomass...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-20
... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials... for natural gas pipelines and for hazardous liquid pipelines. Both committees were established under...
Alfonso, Fernando; Adamyan, Karlen; Artigou, Jean-Yves; Aschermann, Michael; Boehm, Michael; Buendia, Alfonso; Chu, Pao-Hsien; Cohen, Ariel; Dei Cas, Livio; Dilic, Mirza; Doubell, Anton; Echeverri, Dario; Enç, Nuray; Ferreira-González, Ignacio; J. Filipiak, Krzysztof; Flammer, Andreas; Fleck, Eckart; Gatzov, Plamen; Ginghina, Carmen; Goncalves, Lino; Haouala, Habib; Hassanein, Mahmoud; Heusch, Gerd; Huber, Kurt; Hulín, Ivan; Ivanusa, Mario; Krittayaphong, Rungroj; Lau, Chu-Pak; Marinskis, Germanas; Mach, François; Moreira, Luiz Felipe; Nieminen, Tuomo; Oukerraj, Latifa; Perings, Stefan; Pierard, Luc; Potpara, Tatjana; Reyes-Caorsi, Walter; Rim, Se-Joong; Rødevand, Olaf; Saade, Georges; Sander, Mikael; Shlyakhto, Evgeny; Timuralp, Bilgin; Tousoulis, Dimitris; Ural, Dilek; Piek, J. J.; Varga, Albert; Lüscher, Thomas F.
2017-01-01
The International Committee of Medical Journal Editors (ICMJE) provides recommendations to improve the editorial standards and scientific quality of biomedical journals. These recommendations range from uniform technical requirements to more complex and elusive editorial issues including ethical aspects of the scientific process. Recently, registration of clinical trials, conflicts of interest disclosure, and new criteria for authorship- emphasizing the importance of responsibility and accountability-, have been proposed. Last year, a new editorial initiative to foster sharing of clinical trial data was launched. This review discusses this novel initiative with the aim of increasing awareness among readers, investigators, authors and editors belonging to the Editors’ Network of the European Society of Cardiology. PMID:28630534
Alfonso, Fernando; Adamyan, Karlen; Artigou, Jean Yves; Aschermann, Michael; Boehm, Michael; Buendia, Alfonso; Chu, Pao Hsien; Cohen, Ariel; Cas, Livio Dei; Dilic, Mirza; Doubell, Anton; Echeverri, Dario; Enç, Nuray; Ferreira-González, Ignacio; Filipiak, Krzysztof J; Flammer, Andreas; Fleck, Eckart; Gatzov, Plamen; Ginghina, Carmen; Goncalves, Lino; Haouala, Habib; Hassanein, Mahmoud; Heusch, Gerd; Huber, Kurt; Hulín, Ivan; Ivanusa, Mario; Krittayaphong, Rungroj; Lau, Chu Pak; Marinskis, Germanas; Mach, François; Moreira, Luiz Felipe; Nieminen, Tuomo; Oukerraj, Latifa; Perings, Stefan; Pierard, Luc; Potpara, Tatjana; Reyes-Caorsi, Walter; Rim, Se Joong; Rødevand, Olaf; Saade, Georges; Sander, Mikael; Shlyakhto, Evgeny; Timuralp, Bilgin; Tousoulis, Dimitris; Ural, Dilek; Piek, J J; Varga, Albert; Lüscher, Thomas F
2017-06-01
The International Committee of Medical Journal Editors (ICMJE) provides recommendations to improve the editorial standards and scientific quality of biomedical journals. These recommendations range from uniform technical requirements to more complex and elusive editorial issues including ethical aspects of the scientific process. Recently, registration of clinical trials, conflicts of interest disclosure, and new criteria for authorship -emphasizing the importance of responsibility and accountability-, have been proposed. Last year, a new editorial initiative to foster sharing of clinical trial data was launched. This review discusses this novel initiative with the aim of increasing awareness among readers, investigators, authors and editors belonging to the Editors´ Network of the European Society of Cardiology.
Alfonso, Fernando; Adamyan, Karlen; Artigou, Jean-Yves; Aschermann, Michael; Boehm, Michael; Buendia, Alfonso; Chu, Pao-Hsien; Cohen, Ariel; Cas, Livio Dei; Dilic, Mirza; Doubell, Anton; Echeverri, Dario; Enç, Nuray; Ferreira-González, Ignacio; Filipiak, Krzysztof J.; Flammer, Andreas; Fleck, Eckart; Gatzov, Plamen; Ginghina, Carmen; Goncalves, Lino; Haouala, Habib; Hassanein, Mahmoud; Heusch, Gerd; Huber, Kurt; Hulín, Ivan; Ivanusa, Mario; Krittayaphong, Rungroj; Lau, Chu-Pak; Marinskis, Germanas; Mach, François; Moreira, Luiz Felipe; Nieminen, Tuomo; Oukerraj, Latifa; Perings, Stefan; Pierard, Luc; Potpara, Tatjana; Reyes-Caorsi, Walter; Rim, Se-Joong; Rødevand, Olaf; Saade, Georges; Sander, Mikael; Shlyakhto, Evgeny; Timuralp, Bilgin; Tousoulis, Dimitris; Ural, Dilek; Piek, J. J.; Varga, Albert; Lüscher, Thomas F.
2017-01-01
The International Committee of Medical Journal Editors (ICMJE) provides recommendations to improve the editorial standards and scientific quality of biomedical journals. These recommendations range from uniform technical requirements to more complex and elusive editorial issues including ethical aspects of the scientific process. Recently, registration of clinical trials, conflicts of interest disclosure, and new criteria for authorship - emphasizing the importance of responsibility and accountability-, have been proposed. Last year, a new editorial initiative to foster sharing of clinical trial data was launched. This review discusses this novel initiative with the aim of increasing awareness among readers, investigators, authors and editors belonging to the Editors´ Network of the European Society of Cardiology. PMID:28591318
76 FR 3612 - Materials Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-20
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Technical Advisory Committee will meet on February 10... materials and related technology. Agenda Open Session 1. Opening Remarks and Introduction. 2. Remarks from...
77 FR 2714 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-19
... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Department of Energy, Office of Energy Efficiency and Renewable Energy. ACTION: Notice of open meeting, Webinar. SUMMARY: This notice announces an open meeting of the Hydrogen and Fuel Cell Technical Advisory Committee...
75 FR 59705 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)
Federal Register 2010, 2011, 2012, 2013, 2014
2010-09-28
... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Department of Energy, Office of Energy Efficiency and Renewable Energy. ACTION: Notice of open meeting. SUMMARY: The Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) was established under section 807 of...
76 FR 60478 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)
Federal Register 2010, 2011, 2012, 2013, 2014
2011-09-29
... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Department...: The Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) was established under section 807 of... Gas Supply on Fuel Cell and Hydrogen Market. Industry Presentations. Status Cost and Performance of...
75 FR 2860 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-19
... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Department of Energy, Office of Energy Efficiency and Renewable Energy. ACTION: Notice of Open Meeting. SUMMARY: The Hydrogen and Fuel Cell Technical Advisory Committee...
75 FR 26743 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-12
... DEPARTMENT OF ENERGY Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Department of Energy, Office of Energy Efficiency and Renewable Energy. ACTION: Notice of Open Meeting. SUMMARY: The Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) was established under section 807 of...
75 FR 22553 - Materials Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-29
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Technical Advisory Committee will meet on May 13, 2010... applicable to materials and related technology. Agenda Open Session 1. Opening Remarks and Introduction. 2...
75 FR 67347 - Materials Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-02
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Technical Advisory Committee will meet on November 12... materials and related technology. Agenda Open Session 1. Opening remarks by the Chairman and Introduction. 2...
77 FR 25960 - Materials Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-02
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Technical Advisory Committee will meet on May 17, 2012... materials and related technology. Agenda Open Session 1. Opening remarks and introductions. 2. Remarks from...
75 FR 44227 - Materials Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-28
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Technical Advisory Committee will meet on August 12... applicable to materials and related technology. Agenda Open Session 1. Opening Remarks and Introduction. 2...
77 FR 3440 - Materials Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-24
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Technical Advisory Committee will meet on February 9... materials and related technology. Agenda Open Session: 1. Opening Remarks and Introductions. 2. Remarks from...
NASA Astrophysics Data System (ADS)
2008-04-01
Local Organising Committee Ivan Králik (IEP SAS, Košice) Vojtěch Petráček (Czechoslovakia Technical University, Prague) Ján Pišút (Comenius University, Bratislava) Emanuele Quercigh (CERN) Karel Šafařík (CERN), Co-chair Ladislav v Sándor (IEP SAS, Košice), Co-chair Boris Tomášik (Mateja Bela University, Banská Bystrica) Jozef Urbán (UPJŠ Košice) International Advisory Committee Jörg Aichelin, Nantes Federico Antinori, Padova Tamás Biró, Budapest Peter Braun-Munzinger, GSI Jean Cleymans, Cape Town László Csernai, Bergen Timothy Hallman, BNL Huan Zhong Huang, UCLA Sonja Kabana, Nantes Roy A Lacey, Stony Brook Carlos Lourenço, CERN Yu-Gang Ma, Shanghai Jes Masden, Aarhus Yasuo Miake, Tsukuba Berndt Müller, Duke Grazyna Odyniec, LBNL Helmut Oeschler, Darmstadt Jan Rafelski, Arizona Hans Georg Ritter, LBNL Jack Sandweiss, Yale George S F Stephans, MIT Horst Stöcker, Frankfurt Thomas Ullrich, BNL Orlando Villalobos-Baillie, Birmingham William A Zajc, Columbia
WHO Expert Committee on Specifications for Pharmaceutical Preparations. Forty-ninth report.
2015-01-01
The Expert Committee on Specifications for Pharmaceutical Preparations works towards clear, independent and practical standards and guidelines for the quality assurance of medicines. Standards are developed by the Committee through worldwide consultation and an international consensus-building process. The following new guidelines were adopted and recommended for use. Revised procedure for the development of monographs and other texts for The International Pharmacopoeia; Revised updating mechanism for the section on radiopharmaceuticals in The International Pharmacopoeia; Revision of the supplementary guidelines on good manufacturing practices: validation, Appendix 7: non-sterile process validation; General guidance for inspectors on hold-time studies; 16 technical supplements to Model guidance for the storage and transport of time- and temperature-sensitive pharmaceutical products; Recommendations for quality requirements when plant-derived artemisinin is used as a starting material in the production of antimalarial active pharmaceutical ingredients; Multisource (generic) pharmaceutical products: guidelines on registration requirements to establish interchangeability: revision; Guidance on the selection of comparator pharmaceutical products for equivalence assessment of interchangeable multisource (generic) products: revision; and Good review practices: guidelines for national and regional regulatory authorities.
PREFACE: 22nd International Laser Physics Workshop (LPHYS'13)
NASA Astrophysics Data System (ADS)
Steering, LPHYS'13; Advisory; Committees, Program
2014-03-01
Dear Readers, The 22nd annual International Laser Physics Workshop, LPHYS'13, took place in the City of Prague, the Czech Republic. The conference gathered 387 participants from 34 countries. It was hosted by the Institute of Physics at the Academy of Sciences of the Czech Republic and the Czech Technical University in Prague. At this occasion, the LPHYS'13 Steering and the Advisory & Program Committees of the conference would like extend its sincere gratitude to Professor Miroslav Jelínek, Co-Chair and Head of the Local Organizing Committee and his team for the outstanding job performed on organizing, arranging, managing and putting in order the conference that lead to its successful resulting conclusion. As a result of scientific seminars at the Workshop, we would like to present to you the following conference proceedings published in this volume of the IOP Journal of Physics: Conference Series. Please be advised that the 23rd annual International Laser Physics Workshop (LPHYS'14) will take place from 14-18 July, 2014 in Sofia, Bulgaria, hosted by Institute of Electronics at the Bulgarian Academy of Sciences. LPHYS'13 Steering and Advisory & Program Committees
75 FR 56055 - Advisory Committee and Species Working Group Technical Advisor Appointments
Federal Register 2010, 2011, 2012, 2013, 2014
2010-09-15
... Ms. Rachel O'Malley, Office of International Affairs, National Marine Fisheries Service, NOAA, Room..., Silver Spring, MD 20910. Nominations can also be provided via fax (301-713-2313) or e-mail ( Rachel.O'Malley@noaa.gov and [email protected] ). FOR FURTHER INFORMATION CONTACT: Keith Cialino, 301-713...
75 FR 1681 - Advisory Committee International Postal and Delivery Services
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-12
... added to the speaker list must be received in writing (letter, e-mail, or fax) prior to the close of business on February 4, 2010; written comments from members of the public for distribution at this meeting.... For further information, please contact Christopher Wood, Office of Technical Specialized Agencies (IO...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-18
... will meet with its Technical Advisors to discuss matters relating to ICCAT, including the 2012 Commission meeting results; research and management activities; global and domestic initiatives related to... ICCAT meeting results and U.S. implementation of ICCAT decisions; NMFS research and monitoring...
Standardisation in the field of nanotechnology: some issues of legitimacy.
Forsberg, Ellen-Marie
2012-12-01
Nanotechnology will allegedly have a revolutionary impact in a wide range of fields, but has also created novel concerns about health, safety and the environment (HSE). Nanotechnology regulation has nevertheless lagged behind nanotechnology development. In 2004 the International Organization for Standardization established a technical committee for producing nanotechnology standards for terminology, measurements, HSE issues and product specifications. These standards are meant to play a role in nanotechnology development, as well as in national and international nanotechnology regulation, and will therefore have consequences for consumers, workers and the environment. This paper gives an overview of the work in the technical committee on nanotechnology and discusses some challenges with regard to legitimacy in such work. The paper focuses particularly on stakeholder involvement and the potential problems of scientific robustness when standardising in such early stages of the scientific development. The intention of the paper is to raise some important issues rather than to draw strong conclusions. However, the paper will be concluded with some suggestions for improving legitimacy in the TC 229 and a call for increased public awareness about standardisation in the field of nanotechnology.
78 FR 1198 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-08
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC) will meet on January 23 and 24, 2013, 9:00 a.m., at Qualcomm Incorporated, 5775 Morehouse Drive...
77 FR 1666 - Information Systems, Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-11
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems, Technical Advisory Committee; Notice of Partially Closed Meeting The Information Systems Technical Advisory Committee (ISTAC) will meet on January 25 and 26, 2012, 9 a.m., at Qualcomm Incorporated, 5775 Morehouse Drive, Building...
Identifying Needed Technical Standards: The LITA TESLA Committee at Work.
ERIC Educational Resources Information Center
Carter, Ruth C.
1984-01-01
Efforts of the Technical Standards for Library Automation Committee (TESLA), a division-wide committee of the Library Information and Technology Association (LITA) of the American Library Association, are described. The current status of suggested technical standards and recommended action are detailed. Five sources are given. (Author/EJS)
76 FR 21331 - Materials Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-15
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Technical Advisory Committee will meet on May 12, 2011... materials and related technology. Agenda Open Session 1. Opening Remarks by the Chairman and Introduction. 2...
Human research ethics committees in technical universities.
Koepsell, David; Brinkman, Willem-Paul; Pont, Sylvia
2014-07-01
Human research ethics has developed in both theory and practice mostly from experiences in medical research. Human participants, however, are used in a much broader range of research than ethics committees oversee, including both basic and applied research at technical universities. Although mandated in the United States, the United Kingdom, Canada, and Australia, non-medical research involving humans need not receive ethics review in much of Europe, Asia, Latin America, and Africa. Our survey of the top 50 technical universities in the world shows that, where not specifically mandated by law, most technical universities do not employ ethics committees to review human studies. As the domains of basic and applied sciences expand, ethics committees are increasingly needed to guide and oversee all such research regardless of legal requirements. We offer as examples, from our experience as an ethics committee in a major European technical university, ways in which such a committee provides needed services and can help ensure more ethical studies involving humans outside the standard medical context. We provide some arguments for creating such committees, and in our supplemental article, we provide specific examples of cases and concerns that may confront technical, engineering, and design research, as well as outline the general framework we have used in creating our committee. © The Author(s) 2014.
Code of Federal Regulations, 2011 CFR
2011-04-01
... committees for human prescription drugs. 14.160 Section 14.160 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PUBLIC HEARING BEFORE A PUBLIC ADVISORY COMMITTEE Advisory Committees for Human Prescription Drugs § 14.160 Establishment of standing technical advisory committees for...
Code of Federal Regulations, 2014 CFR
2014-04-01
... committees for human prescription drugs. 14.160 Section 14.160 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PUBLIC HEARING BEFORE A PUBLIC ADVISORY COMMITTEE Advisory Committees for Human Prescription Drugs § 14.160 Establishment of standing technical advisory committees for...
Code of Federal Regulations, 2012 CFR
2012-04-01
... committees for human prescription drugs. 14.160 Section 14.160 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PUBLIC HEARING BEFORE A PUBLIC ADVISORY COMMITTEE Advisory Committees for Human Prescription Drugs § 14.160 Establishment of standing technical advisory committees for...
Thomas, Karluss; MacIntosh, Sue; Bannon, Gary; Herouet-Guicheney, Corinne; Holsapple, Michael; Ladics, Gregory; McClain, Scott; Vieths, Stefan; Woolhiser, Michael; Privalle, Laura
2009-06-01
The safety assessment of genetically modified crops includes the evaluation for potential allergenicity. The current 'state-of-the-science' utilizes a weight of evidence approach, as outlined by the Codex Alimentarius commission (Alinorm 03/34 A), recognizing no single endpoint is predictive of the allergenic potential of a novel protein. This approach evaluates: whether the gene source is allergenic, sequence similarity to known allergens, and protein resistance to pepsin in vitro. If concerns are identified, serological studies may be necessary to determine if a protein has IgE binding similar to known allergens. Since there was a lack of standardized/validated methods to conduct the allergenicity assessment, a committee was assembled under the International Life Sciences Institute Health and Environmental Sciences Institute to address this issue. Over the last eight years, the Protein Allergenicity Technical Committee has convened workshops and symposia with allergy experts and government authorities to refine methods that underpin the assessment for potential protein allergenicity. This publication outlines this ongoing effort, summarizing workshops and formal meetings, referencing publications, and highlighting outreach activities. The purpose is to (1) outline 'the state-of-the-science' in predicting protein allergenicity in the context of current international recommendations for novel protein safety assessment, and (2) identify approaches that can be improved and future research needs.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-21
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Transportation and Related Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Transportation and Related Equipment Technical Advisory Committee will meet on May 5, 2010, 9:30 a.m., in the Herbert C. Hoover Building, Room 6087B, 14th Street between Constitution &...
Code of Federal Regulations, 2010 CFR
2010-04-01
... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Nominations and selection of nonvoting members of standing technical advisory committees. 14.84 Section 14.84 Food and Drugs FOOD AND DRUG ADMINISTRATION... Advisory Committees § 14.84 Nominations and selection of nonvoting members of standing technical advisory...
Alfonso, Fernando; Adamyan, Karlen; Artigou, Jean-Yves; Aschermann, Michael; Boehm, Michael; Buendia, Alfonso; Chu, Pao-Hsien; Cohen, Ariel; Cas, Livio Dei; Dilic, Mirza; Doubell, Anton; Echeverri, Dario; Enç, Nuray; Ferreira-González, Ignacio; Filipiak, Krzysztof J; Flammer, Andreas; Fleck, Eckart; Gatzov, Plamen; Ginghina, Carmen; Goncalves, Lino; Haouala, Habib; Hassanein, Mahmoud; Heusch, Gerd; Huber, Kurt; Hulín, Ivan; Ivanusa, Mario; Krittayaphong, Rungroj; Lau, Chu-Pak; Marinskis, Germanas; Mach, François; Moreira, Luiz Felipe; Nieminen, Tuomo; Oukerraj, Latifa; Perings, Stefan; Pierard, Luc; Potpara, Tatjana; Reyes-Caorsi, Walter; Rim, Se-Joong; Rødevand, Olaf; Saade, Georges; Sander, Mikael; Shlyakhto, Evgeny; Timuralp, Bilgin; Tousoulis, Dimitris; Ural, Dilek; Piek, J J; Varga, Albert; Lüscher, Thomas F
The International Committee of Medical Journal Editors (ICMJE) provides recommendations to improve the editorial standards and scientific quality of biomedical journals. These recommendations range from uniform technical requirements to more complex and elusive editorial issues including ethical aspects of the scientific process. Recently, registration of clinical trials, conflicts of interest disclosure, and new criteria for authorship - emphasizing the importance of responsibility and accountability -, have been proposed. Last year, a new editorial initiative to foster sharing of clinical trial data was launched. This review discusses this novel initiative with the aim of increasing awareness among readers, investigators, authors and editors belonging to the Editors' Network of the European Society of Cardiology. Copyright © 2017. Publicado por Masson Doyma México S.A.
NASA Technical Reports Server (NTRS)
Tripp, John S.; Tcheng, Ping; Burner, Alpheus W.; Finley, Tom D.
1999-01-01
The first International Symposium on Strain Gauge Balances was sponsored under the auspices of the NASA Langley Research Center (LaRC), Hampton, Virginia during October 22-25, 1996. Held at the LaRC Reid Conference Center, the Symposium provided an open international forum for presentation, discussion, and exchange of technical information among wind tunnel test technique specialists and strain gauge balance designers. The Symposium also served to initiate organized professional activities among the participating and relevant international technical communities. The program included a panel discussion, technical paper sessions, tours of local facilities, and vendor exhibits. Over 130 delegates were in attendance from 15 countries. A steering committee was formed to plan a second international balance symposium tentatively scheduled to be hosted in the United Kingdom in 1998 or 1999. The Balance Symposium was followed by the half-day Workshop on Angle of Attack and Model Deformation on the afternoon of October 25. The thrust of the Workshop was to assess the state of the art in angle of attack (AoA) and model deformation measurement techniques and to discuss future developments.
78 FR 29125 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-17
... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and... Biomass Research and Development Technical Advisory Committee. The Federal Advisory Committee Act (Pub. L... contact (Departments of [[Page 29126
75 FR 74026 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-30
... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory... participation. This notice announces the meeting of the Biomass Research and Development Technical Advisory...
Sustaining global progress in E and P health, safety, and environment
DOE Office of Scientific and Technical Information (OSTI.GOV)
Arscott, R.L.; Edwardes, R.J.; Ognedal, M.
1996-12-01
The third International Conference on Health, Safety and Environment (HSE) was held in New Orleans in June 1996. During this meeting, the technical committee members were asked to complete a questionnaire with two questions: (1) What are the three biggest improvements in the industry`s performance in the HSE function over the past 5 years? and (2) What are the three biggest challenges for the next 5 years? The results from 30 replies from industry experts were compared with a similar survey conducted at the 1991 meeting, where the question was, What are the key action items the industry should takemore » to enhance performance over the next decade? This article gives the most frequently occurring comments cited by the 1996 technical committee relating to the 1991 recommendations. This may be considered a mid-decade review of worldwide E and P progress.« less
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-07
... many of the issues that the GFO committee addresses, such as genetically modified organisms, new... modifying the existing structure of both the Agricultural Technical Advisory Committees (ATAC) for Trade in...
The Capabilities of Space Stations
NASA Technical Reports Server (NTRS)
1995-01-01
Over the past two years the U.S. space station program has evolved to a three-phased international program, with the first phase consisting of the use of the U.S. Space Shuttle and the upgrading and use of the Russian Mir Space Station, and the second and third phases consisting of the assembly and use of the new International Space Station. Projected capabilities for research, and plans for utilization, have also evolved and it has been difficult for those not directly involved in the design and engineering of these space stations to learn and understand their technical details. The Committee on the Space Station of the National Research Council, with the concurrence of NASA, undertook to write this short report in order to provide concise and objective information on space stations and platforms -- with emphasis on the Mir Space Station and International Space Station -- and to supply a summary of the capabilities of previous, existing, and planned space stations. In keeping with the committee charter and with the task statement for this report, the committee has summarized the research capabilities of five major space platforms: the International Space Station, the Mir Space Station, the Space Shuttle (with a Spacelab or Spacehab module in its cargo bay), the Space Station Freedom (which was redesigned to become the International Space Station in 1993 and 1994), and Skylab. By providing the summary, together with brief descriptions of the platforms, the committee hopes to assist interested readers, including scientists and engineers, government officials, and the general public, in evaluating the utility of each system to meet perceived user needs.
Proposal by the German Democratic Republic on use of the geostationary orbit
NASA Astrophysics Data System (ADS)
Hampe, W.; Mueller, R.
In 1986, the German Democratic Republic submitted the working paper entitled "Draft principles governing the activities of States in the utilization of the geostationary orbit." The underlying motive for the G.D.R.—which supports the mandate given by the UN General Assembly to the Committee on the Peaceful Uses of Outer Space/Legal Sub-Committee, namely "to consider matters relating to the character and utilization of the geostationary orbit, including consideration of ways and means to ensure the rational and equitable use of the geostationary orbit without prejudice to the role of the International Telecommunication Union"—was that a generally accepted solution to the complex political, legal and technical questions relating to the use of the geostationary orbit both within the ITU and in the framework of the Legal Sub-Committee would be in the interest of all States. In that quest, both the ITU and the COPUOS/LSC should play a major part. Here, the Legal Sub-Committee could substantiate and develop the international legal framework for the use of the geostationary orbit in conformity with existing space law and the relevant ITU decisions.
NASA Technical Reports Server (NTRS)
Jenkins, Michael G.; Salem, Jonathan A.
2016-01-01
Physical and mechanical properties and performance of advanced ceramics and glasses are difficult to measure correctly without the proper techniques. For over three decades, ASTM Committee C28 on Advanced Ceramics, has developed high quality, rigorous, full-consensus standards (e.g., test methods, practices, guides, terminology) to measure properties and performance of monolithic and composite ceramics that may be applied to glasses in some cases. These standards testing particulars for many mechanical, physical, thermal, properties and performance of these materials. As a result these standards provide accurate, reliable, repeatable and complete data. Within Committee C28 users, producers, researchers, designers, academicians, etc. have written, continually updated, and validated through round-robin test programs, nearly 50 standards since the Committees founding in 1986. This paper provides a retrospective review of the 30 years of ASTM Committee C28 including a graphical pictogram listing of C28 standards along with examples of the tangible benefits of advanced ceramics standards to demonstrate their practical applications.
7 CFR 1728.30 - Inclusion of an item for listing or technical acceptance.
Code of Federal Regulations, 2010 CFR
2010-01-01
... be referred to Technical Standards Committee “B.” Written notice of Technical Standards Committee “A... 7 Agriculture 11 2010-01-01 2010-01-01 false Inclusion of an item for listing or technical... AND CONSTRUCTION § 1728.30 Inclusion of an item for listing or technical acceptance. (a) Scope. RUS...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-08
... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP STAC or Advisory Committee), National Institute for Occupational Safety and Health (NIOSH) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463),...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-31
... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP STAC or Advisory Committee), National Institute for Occupational Safety and Health (NIOSH) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463),...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-12-29
... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP STAC or Advisory Committee), National Institute for Occupational Safety and Health (NIOSH) In accordance with section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463)...
Standards and Trade in the 1990s
1993-01-01
in the 1990s This Technical Committee decided to work efforts made by EWOS (European Work - on ENs and ENVs for, among ...EMC work is that it possible, the results of our global partner, cannot be performed in isolation, by one the International Electrotechnical Commis...evolution of standards ficient operation and sound management and conformity assessment in the United depend on the
Light Pollution - An international perspective
NASA Astrophysics Data System (ADS)
Wainscoat, Richard J.
2018-01-01
The CIE (Commission Internationale de l'Eclairage, or International Commission on Illumination) is the international organization devoted to worldwide cooperation and the exchange of information on all matters relating to the science and art of light and lighting, colour and vision, photobiology and image technology. Its actions and recommendations affect lighting worldwide, and artifiical lighitng has a profound impact on ground-based astronomy. The CIE establishes Technical Committees to research speicific aspects of lighting. The CIE will hold its biannual meeting in October 2017 in South Korea. I will report on astronomy and light pollution related information from that meeting.
76 FR 38608 - Sensors and Instrumentation Technical Advisory Committee;
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-01
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-14
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... of export controls applicable to sensors [[Page 20949
International cooperation for Mars exploration and sample return
NASA Technical Reports Server (NTRS)
Levy, Eugene H.; Boynton, William V.; Cameron, A. G. W.; Carr, Michael H.; Kitchell, Jennifer H.; Mazur, Peter; Pace, Norman R.; Prinn, Ronald G.; Solomon, Sean C.; Wasserburg, Gerald J.
1990-01-01
The National Research Council's Space Studies Board has previously recommended that the next major phase of Mars exploration for the United States involve detailed in situ investigations of the surface of Mars and the return to earth for laboratory analysis of selected Martian surface samples. More recently, the European space science community has expressed general interest in the concept of cooperative Mars exploration and sample return. The USSR has now announced plans for a program of Mars exploration incorporating international cooperation. If the opportunity becomes available to participate in Mars exploration, interest is likely to emerge on the part of a number of other countries, such as Japan and Canada. The Space Studies Board's Committee on Cooperative Mars Exploration and Sample Return was asked by the National Aeronautics and Space Administration (NASA) to examine and report on the question of how Mars sample return missions might best be structured for effective implementation by NASA along with international partners. The committee examined alternatives ranging from scientific missions in which the United States would take a substantial lead, with international participation playing only an ancillary role, to missions in which international cooperation would be a basic part of the approach, with the international partners taking on comparably large mission responsibilities. On the basis of scientific strategies developed earlier by the Space Studies Board, the committee considered the scientific and technical basis of such collaboration and the most mutually beneficial arrangements for constructing successful cooperative missions, particularly with the USSR.
NASA Technical Reports Server (NTRS)
1920-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, expenditures, and a compilation of technical reports produced.
77 FR 64970 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-24
... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and... Biomass Research and Development Technical Advisory Committee. The Federal Advisory Committee Act (Pub. L... Meeting: To provide advice and guidance that promotes research and development leading to the production...
78 FR 8500 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2013-02-06
... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and... Biomass Research and Development Technical Advisory Committee. The Federal Advisory Committee Act (Pub. L... fuels and biobased products. Tentative Agenda: Agenda will include the following: Update on USDA Biomass...
76 FR 72902 - Materials Processing Equipment Technical Advisory Committee;
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-28
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical... questions that affect the level of export controls applicable to materials processing equipment and related...
NASA Technical Reports Server (NTRS)
1916-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, expenditures, problems, recommendations, and a compilation of technical reports produced.
76 FR 28759 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-18
... Advisory Committee (HTAC) was established under section 807 of the Energy Policy Act of 2005 (EPACT... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) AGENCY: Office of Energy Efficiency and Renewable Energy, Department of...
NASA Technical Reports Server (NTRS)
1920-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, expenditures, problems, recommendations, and a compilation of technical reports produced.
WHO Expert Committee on Specifications for Pharmaceutical Preparations.
2011-01-01
The Expert Committee on Specifications for Pharmaceutical Preparations works towards clear, independent and practical standards and guidelines for the quality assurance of medicines. Standards are developed by the Committee through worldwide consultation and an international consensus-building process. The following new guidelines were adopted and recommended for use: procedure for adoption of International Chemical Reference Substances; WHO good practices for pharmaceutical microbiology laboratories; good manufacturing practices: main principles for pharmaceutical products; good manufacturing practices for blood establishments (jointly with the Expert Committee on Biological Standardization); guidelines on good manufacturing practices for heating, ventilation and air-conditioning systems for non-sterile pharmaceutical dosage forms; good manufacturing practices for sterile pharmaceutical products; guidelines on transfer of technology in pharmaceutical manufacturing; good pharmacy practice: standards for quality of pharmacy services (joint FIP/WHO); model guidance for the storage and transport of time- and temperature-sensitive pharmaceutical products (jointly with the Expert Committee on Biological Standardization); procedure for prequalification of pharmaceutical products; guide on submission of documentation for prequalification of innovator finished pharmaceutical products approved by stringent regulatory authorities; prequalification of quality control laboratories: procedure for assessing the acceptability, in principle, of quality control laboratories for use by United Nations agencies; guidelines for preparing a laboratory information file; guidelines for drafting a site master file; guidelines on submission of documentation for a multisource (generic) finished product: general format: preparation of product dossiers in common technical document format.
Standardization of Assistive Products with Robotic Technology - From a Perspective of ISO/TC173.
Inoue, Takenobu; Yamauchi, Shigeru; Westman, Karl-Erik
2017-01-01
ISO/TC173 is a technical committee, in charge of international standardization of assistive products (APs). Robotic technology (RT) is currently an important topic in this field. APs with RT will be included in future revisions of the scope of TC173. Cooperation between the AP and RT space is essential to reach suitable solutions of future standardization.
Radiological Source Localisation
2007-07-01
activity. This algorithm was able to provide reasonable source estimates based on real data collected using the Low Cost Advanced Airborne...courses in Australia, Europe and the US. He is lecturing a post-graduate subject at Adelaide University (subject ”Multi-Sensor Data Fusion ”). He served on...technical committees of several international conferences, and is the Chair of the Fourth Australian Data Fusion Sym- posium (IDC-07). Dr Ristic won
78 FR 38983 - World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP-STAC)
Federal Register 2010, 2011, 2012, 2013, 2014
2013-06-28
... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP-STAC) Correction: This notice was... and Control, (BSC, NCIPC) and the name of the Committee should read World Trade Center Health Program...
Special Issue of Solid-State Electronics, dedicated to EUROSOI-ULIS 2016
NASA Astrophysics Data System (ADS)
Sverdlov, Viktor; Selberherr, Siegfried
2017-02-01
The current special issue of Solid-State Electronics includes 29 extended papers presented at the 2016 Second Joint International EUROSOI Workshop and International Conference on Ultimate Integration on Silicon (EUROSOI-ULIS 2016) held in Wien, Austria, on January 25-27, 2016. The papers entering to the special issue have been selected by the EUROSOI-ULIS 2016 Technical Program Committee based on the excellence of abstracts submitted and presentations delivered at the conference. In order to comply with the high standards of Solid-State Electronics the manuscripts went through the standard reviewing procedure.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-06
... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment; Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-28
... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-02-28
... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-31
... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-14
... that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-19
... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-24
... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-02
... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-17
... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-19
... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment; Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-10-23
... questions that affect the level of export controls applicable to materials processing equipment and related... DEPARTMENT OF COMMERCE Bureau of Industry and Security Materials Processing Equipment Technical Advisory Committee; Notice of Partially Closed Meeting The Materials Processing Equipment Technical...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-04
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. Agenda...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-11
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. Agenda...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-13
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. Agenda...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-02
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. Agenda...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-11
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. Agenda...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-18
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-25
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-08
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. Agenda...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-10-01
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. [[Page...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-22
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-12
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... level of export controls applicable to sensors and instrumentation equipment and technology. Agenda...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-17
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... the level of export controls applicable to sensors and instrumentation equipment and technology...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-13
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-03
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors And Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting The Sensors and Instrumentation Technical Advisory... of export controls applicable to sensors and instrumentation equipment and technology. Agenda Public...
75 FR 30804 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-02
... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory... Register to allow for public participation. This notice announces the meeting of the Biomass Research and...
75 FR 56525 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2010-09-16
... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory... Register to allow for public participation. This notice announces the meeting of the Biomass Research and...
75 FR 11526 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-11
... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory... Register to allow for public participation. This notice announces the meeting of the Biomass Research and...
75 FR 15342 - Advisory Committees; Technical Amendment
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-29
... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 14 [Docket No. FDA-2010-N-0001] Advisory Committees; Technical Amendment Agency: Food and Drug Administration, HHS. ACTION: Final rule; technical amendment. SUMMARY: The Food and Drug Administration (FDA) is amending its...
The ESO Scientific and Technical Committee.
NASA Astrophysics Data System (ADS)
Léna, P.
1982-03-01
Since 1978, the structure of ESO involves a Scientific and Technical Committee (STC) which advises the Council on scientific and technical matters. This committee meets twice a year, usually at Garehing; its members are nominated by the Council and their term is 4 years. The STC has 10 members, who are as evenly distributed as possible among member countries, although indeed mainly chosen for their scientific abilities. The chairman is invited to attend Council meetings and to report to the members.
PREFACE: Annual Conference on Functional Materials and Nanotechnologies - FM&NT 2011
NASA Astrophysics Data System (ADS)
Sternberg, Andris; Muzikante, Inta; Zicans, Janis
2011-06-01
The International Conference Functional Materials and Nanotechnologies (FM&NT-2011) was held in Riga, 5-8 April 2011 in the Institute of Solid State Physics, University of Latvia (ISSP LU). The conference was organized in co-operation with projects ERANET 'MATERA' and National Research programme in Materials Science and Information Technologies. The purpose of the conference was to bring together scientists, engineers and students from universities, research institutes and related industrial companies active in the field of advanced material science and materials technologies trends and future activities. Scientific themes covered in the conference are: theoretical research and modelling of processes and materials; materials for energetics, renewable energy technologies and phtovoltaics; multifunctional inorganic, organic and hybrid materials for photonic, micro and nanoelectronic applications and innovative methods for research of nanostructures; advanced technologies for synthesis and research of nanostructured materials, nanoparticles, thin films and coatings; application of innovative materials in science and economics. The number of registered participants from 17 countries was nearly 300. During three days of the conference 22 invited, 69 oral reports and 163 posters were presented. 40 papers, based on these reports, are included in this volume of IOP Conference Series: Materials Science and Engineering. Additional information about FM&NT-2011 is available in its homepage http://www.fmnt.lu.lv. The Organizing Committee would like to thank all speakers, contributors, session chairs, referees and meeting staff for their efforts in making the FM&NT-2011 successful. The Organizing Committee sincerely hopes that that the conference gave all participants new insights into the widespread development of functional materials and nanotechnologies and would enhance the circulation of information released at the meeting. Andris Sternberg Inta Muzikante Janis Zicans Conference photograph ERAF logo International Organizing Committee Andris Sternberg (chairperson), Institute of Solid State Physics, University of Latvia, Latvia, MATERA Juras Banys, Vilnius University, Lithuania Gunnar Borstel, University of Osnabrück, Germany Niels E Christensen, University of Aarhus, Denmark Robert A Evarestov, St. Petersburg State University, Russia Claes-Goran Granqvist, Uppsala University, Sweden Dag Høvik, The Research Council of Norway, Norway, MATERA Marco Kirm, Institute of Physics, University of Tartu, Estonia Vladislav Lemanov, Ioffe Physical Technical Institute, Russia Witold Lojkowski, Institute of High Pressure Physics, Poland Ergo Nommiste, University of Tartu, Estonia Helmut Schober, Institut Laue-Langevin, France Sisko Sipilä, Finnish Funding Agency for Technology and Innovation, Finland, MATERA Ingólfur Torbjörnsson, Icelandic Centre for Research, Iceland, MATERA Marcel H Van de Voorde, University of Technology Delft, The Netherlands International Program Committee Inta Muzikante (chairperson), Institute of Solid State Physics, University of Latvia, Latvia, MATERA Liga Berzina-Cimdina, Institute of Biomaterials and Biomechanics, Riga Technical University, Latvia Janis Grabis, Institute of Inorganic Chemistry, Riga Technical University, Latvia Leonid V Maksimov, Vavilov State Optical Institute, Russia Linards Skuja, Institute of Solid State Physics, University of Latvia, Latvia Maris Springis, Institute of Solid State Physics, University of Latvia, Latvia Ilmars Zalite, Institute of Inorganic Chemistry, Riga Technical University, Latvia Janis Zicans, Institute of Polymers, Riga Technical University Local Committee: Liga Grinberga, Anatolijs Sarakovskis, Jurgis Grube, Raitis Siatkovskis, Maris Kundzins, Anna Muratova, Maris Springis, Aivars Vembris, Krisjanis Smits, Andris Fedotovs, Dmitrijs Bocarovs, Anastasija Jozepa, Andris Krumins.
78 FR 56871 - Advanced Scientific Computing Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-16
... Germantown Update on Exascale Update from Exascale technical approaches subcommittee Facilities update Report from Applied Math Committee of Visitors Exascale technical talks Public Comment (10-minute rule) Public...
History and Organizations for Radiological Protection.
Kang, Keon Wook
2016-02-01
International Commission on Radiological Protection (ICRP), an independent international organization established in 1925, develops, maintains, and elaborates radiological protection standards, legislation, and guidelines. United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) provides scientific evidence. World Health Organization (WHO) and International Atomic Energy Agency (IAEA) utilise the ICRP recommendations to implement radiation protection in practice. Finally, radiation protection agencies in each country adopt the policies, and adapt them to each situation. In Korea, Nuclear Safety and Security Commission is the governmental body for nuclear safety regulation and Korea Institute of Nuclear Safety is a public organization for technical support and R&D in nuclear safety and radiation protection.
ERIC Educational Resources Information Center
Department of the Interior, Washington, DC. Federal Water Pollution Control Administration.
Contained are reports of five subcommittees of the National Technical Advisory Committee on Water Quality Criteria. Subcommittees were recreation and aesthetics; public water supplies; fish, other aquatic life, and wildlife; agricultural uses; and industrial water supplies. Each committee report contains discussion of the problem area, criteria…
Printing/Graphic Arts Technology. Curriculum Guide. Invest in Success.
ERIC Educational Resources Information Center
Idaho State Dept. of Education, Boise. Div. of Vocational Education.
Under the Idaho state system for curriculum development in vocational education, Technical Committees made up solely of industry personnel are responsible for drawing up task lists for each program. A Technical Committee Report is prepared on completion of the Committee's assignment. This report presents a task list that reflects current trends…
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-13
... Strategy. The Committee will oversee the Technical (writing) Teams, ensure a robust engagement process with... the Strategy's Technical Teams and stakeholder engagement. DATES: The second Steering Committee... public comment during the meeting at approximately 3 p.m., and written comments may be submitted via the...
75 FR 51240 - Pacific Fishery Management Council; Public Meetings
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-19
... Remarks and Introductions 2. Council Member Appointments 3. Roll Call 4. Executive Director's Report 5... Technical Team/Salmon Amendment Committee Joint 8 a.m. Session Scientific and Statistical Committee 8 a.m.... Salmon Technical Team 8 a.m. Scientific and Statistical Committee 8 a.m. Enforcement Consultants 4:30 p.m...
77 FR 12799 - Census Scientific Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-02
...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... and technical expertise, as appropriate, to address Census Bureau program needs and objectives. The...
75 FR 16078 - Census Scientific Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-31
...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... and technical expertise, as appropriate, to address Census Bureau program needs and objectives. The...
76 FR 54197 - Census Scientific Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-31
...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... scientific and technical expertise, as appropriate, to address Census Bureau program needs and objectives...
7 CFR 614.10 - Appeals before the Farm Service Agency county committee.
Code of Federal Regulations, 2010 CFR
2010-01-01
... section are completed, provide the FSA county committee with a written technical determination in the form... part 780, a participant may appeal a final technical determination or a program decision to the FSA... appeal requests review of the technical determination by the applicable State Conservationist prior to...
77 FR 60430 - Meeting of the Mobile Sources Technical Review Subcommittee
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-03
... ENVIRONMENTAL PROTECTION AGENCY [FRL-9736-3] Meeting of the Mobile Sources Technical Review... Advisory Committee Act, Public Law 92- 463, notice is hereby given that the Mobile Sources Technical Review... Advisory Committee. This is an open meeting. The meeting will include discussion of current topics and...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-15
... Biomass Research and Development Technical Advisory Committee AGENCY: Department of Energy. ACTION: Notice... the Biomass Research and Development Technical Advisory Committee. DATES: Deadline for Technical... at (202) 586-2933; e-mail: [email protected] . SUPPLEMENTARY INFORMATION: The Biomass...
International Symposium on Advanced Materials (ISAM 2013)
NASA Astrophysics Data System (ADS)
2014-06-01
This proceeding is a compilation of peer reviewed papers presented at the 13th International Symposium on Advanced Materials (ISAM 2013) held from September 23-27, 2013, at Islamabad, Pakistan. In my capacity as ISAM-2013 Secretary, I feel honoured that the symposium has ended on a positive note. The ever increasing changes and intricacies that characterize modern industry necessitate a growing demand for technical information on advanced materials. ISAM and other similar forums serve to fulfill this need. The five day deliberations of ISAM 2013, consisted of 19 technical sessions and 2 poster sessions. In all, 277 papers were presented, inclusive of 80 contributory, invited and oral presentations. The symposium also hosted panel discussions led by renowned scientists and eminent researchers from foreign as well as local institutes. The ultimate aim of this proceeding is to record in writing the new findings in the field of advanced materials. I hope that the technical data available in this publication proves valuable to young scientists and researchers working in this area of science. At the same time, I wish to acknowledge Institute of Physics (IOP) Publishing UK, for accepting the research papers from ISAM-2013 for publication in the IOP Conference Series: Materials Science and Engineering. The proceeding will be available on the IOP website as an online open access document. I am profoundly thankful to the Symposium Chairman for his steadfast support and valuable guidance without which ISAM 2013 could not have been the mega event that it turned out to be. My gratitude to all our distinguished participants, session chairs/co-chairs, and reviewers for their active role in the symposium. I appreciate the entire organizing committee for the zest and ardor with which each committee fulfilled its obligations to ISAM. Last yet not the least, my thankfulness goes to all our sponsors for wilfully financing the event. Dr. Sara Qaisar Symposium Secretary Further conference information, including information on the organizing committee and conferene sponsors, is available in the pdf.
NASA Astrophysics Data System (ADS)
Datta, T. S.; Sharma, R. G.; Kar, S.
2017-02-01
International Conference ICEC 26 - ICMC 2016 was organized at New Delhi, India during March 7-11, 2016. Previous conference ICEC25-ICMC 2014 was held at the University of Twente, The Netherlands in July 2014. Next Conference ICEC 27- ICMC 2018 will be held at Oxford, UK during September 3-7, 2018 1. Introduction This is a biennial international conference on cryogenic engineering and cryogenics materials organized by the International Cryogenic Engineering Committee and the International Cryogenic Material Committee. For some years, the host country has been alternating between Europe and Asia. The present conference was held at the Manekshaw Convention Centre, New Delhi, India during March 7-11, 2016 and hosted jointly by the Indian Cryogenics Council (ICC) and the Inter-University Accelerator Centre (IUAC), New Delhi. Put all together as many as 547 persons participated in the conference. Out of these 218 were foreign delegates coming from 25 countries and the rest from India. 2. Inaugural Session & Course Lectures The pre conference short course lectures on “Cryocoolers” and “Superconducting Materials for Power Applications” were organized on 7th March. Cryocooler course was given jointly by Dr. Chao Wang from M/s. Cryomech, USA and Prof. Milind Atrey from IIT Bombay, India. The Course on Superconducting Materials was given by Prof. Venkat Selvamanickam from the University of Houston, USA. The conference was inaugurated in the morning of March 8th in a typical Indian tradition and in the presence of the Chief Guest, Dr. R Chidambaram (Principle Scientific Adviser to Govt. of India), Guest of Honour, Prof. H Devaraj (Vice Chairman University Grant Commission), Prof Marcel ter Brake ( Chair, ICEC Board), Prof. Wilfried Goldacker (Chair, ICMC board), Dr. D Kanjilal (Director IUAC), Dr R K Bhandari, (President, Indian Cryogenic Council ). Dr. T S Datta, Chair Local Organizing Committee coordinated the proceedings of the inaugural function. 3. Technical Session There were 6 plenary talks delivered by the eminent scientist/ technologists. The topics on which these talks were delivered were Cryogenics for Indian Space Programme, The Cold Chain, Super-fluid Cooling Technology, Review on Superconducting Materials in China, Review on Cryogenics and Superconductivity for present day MRI and finally the Mendelssohn Award lecture on the 50 years of Cryogenics and Superconductivity for High Energy Physics. Other than the plenary talks, there were 102 oral presentations covered in 18 technical sessions, out of which 21 were Invited Talks. Each session was dedicated to a specific topic like Large Scale Cryogenics, Cryogenics for Accelerators, Fusion and Space, Cryocoolers, Heat Transfer, Cryogenic Instrumentation, Superconducting Materials, Superconducting Magnets & Cavities, Power Applications, LNG & Safety etc. In addition to oral presentations there were three poster sessions spread over three days and a total of 250 posters were displayed. 4. Award Session There was a dedicated session on Award Ceremony. Dr Haishan Cao, post doctoral researcher at the University of Twente, The Netherlands received the 2016 Klipping Award for his work on Micro-machined Joule-Thomson coolers. The ICMC Cryogenic Material Awardee for Excellence (2016) was Prof. Kazumasa Iida, Department of Crystalline Materials Science, Graduate School of Engineering, Nagoya University. Japan. The paper published in ” Cryogenics 72 (2015), p 111-121 by J. Bartlett, G. Hardy, and I.D. Hepburn, titled “Performance of a fast response miniature Adiabatic Demagnetization Refrigerator using a single crystal tungsten magneto resistive heat switch” was selected for the best paper award. The prestigious 2016 Mendelssohn Award was given to Dr. Philippe Lebrun of CERN, Geneva, Switzerland for his life-long contribution to Cryogenics and Superconductivity for accelerator programme. Each awardees was also presented with a complimentary book from Springer Nature through the efforts of Dr. R.G. Sharma. 5. Exhibition, Cultural Evening & Technical Tour An Industrial exhibition with about 30 international and Indian companies displayed their advanced products in the field of cryogenics and superconductivity for three days. A banquette was hosted in a resort on the outskirt of the city of Delhi on March 10, 2016. A cultural evening was also organized on March 9, 2016 where delegates too participated and enjoyed typical Indian folk dances. On the last day, a technical tour to Inter University Accelerator Centre and a cultural tour to Delhi Monuments was organized for the Delegates. 6. Manuscripts Based on the presentations, we received about 234 manuscripts by March 20, 2016 for the purpose of publication in IOP Conference series (Material Science & Engineering). To ensure the high publication standard mandated by IOP, every paper was reviewed by at least two referees before it was accepted for publication. In all 154 manuscripts were accepted for publication based upon the comments of the referees and the final decision of the Editorial Board. 7. Acknowledgement As editors of this proceedings, we would like to express our sincere appreciation to all of referees / members of organizing and steering committee involved in the evaluation of the papers for their valuable contribution. Our sincere thanks to Ms. Tania Gupta from ICC & Ms. Sarah Toms and Ms. Anete Ashton from IOP publication office for coordinating the publication. Finally we would like to thank all the members of the ICEC committee, the ICMC committee, Steering committee, Local organizing committee, Programme committee and Sectional local committee for their guidance, assistance and cooperation in organizing this twin conference successfully. We look forward to meet you at the next conference, ICEC 27- ICMC 2018 at Oxford, England during September 3-7, 2018. S. Kar R G Sharma T S Datta (Convener) (Chair, Scientific Programme Committee) (Chairman, Local Organizing Committee) December 30, 2016
Free acquisition and dissemination of data through remote sensing. [Landsat program legal aspects
NASA Technical Reports Server (NTRS)
Hosenball, S. N.
1976-01-01
Free acquisition and dissemination of data through remote sensing is discussed with reference to the Landsat program. The role of the Scientific and Technical Subcommittee of the U.N. General Assembly's Committee on the Peaceful Uses of Outer Space has made recommendations on the expansion of existing ground stations and on the establishment of an experimental center for training in remote sensing. The working group for the legal subcommittee of the same U.N. committee indicates that there are common elements in the three drafts on remote sensing submitted to it: a call for international cooperation and the belief that remote sensing should be conducted for the benefit of all mankind.
ERIC Educational Resources Information Center
Northern Montana Coll., Havre. Montana Center for Vocational Education, Research, Curriculum and Personnel Development.
This skills inventory for travel and tourism occupations was developed by a technical committee in Montana to assist in the development of model curricula and to address state labor market needs. The committee included employers from the travel and tourism industry, members of trade and professional associations, and educators. The validated task…
ERIC Educational Resources Information Center
Mercer, John W.; Meunier, Greg R.
This document, which was developed by a task force whose members represent the instructional, student support service, administrative, and executive ranks of technical colleges with very diverse sizes, locations, and programs, lists 50 proposed indices of effectiveness regarding the program advisory committees (ACs) in Minnesota's technical…
ERIC Educational Resources Information Center
Northern Montana Coll., Havre. Montana Center for Vocational Education, Research, Curriculum and Personnel Development.
This skills inventory for health care occupations was developed by a technical committee in Montana to assist in the development of model curricula and to address state labor market needs. The committee included employers from hospitals and other health care providers, members of trade and professional associations, and educators. The validated…
ERIC Educational Resources Information Center
Northern Montana Coll., Havre. Montana Center for Vocational Education, Research, Curriculum and Personnel Development.
This skills inventory for mining occupations was developed by a technical committee in Montana to assist in the development of model curricula and to address state labor market needs. The committee included employers from the mining industry, members of trade and professional associations, and educators. The validated task list and defined job…
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-02
... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP STAC or Advisory Committee), National Institute for Occupational Safety and Health (NIOSH) Notice of Cancellation: This notice was published in the Federal Register on December 29,...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-15
... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP STAC or Advisory Committee), National Institute for Occupational Safety and Health (NIOSH) Correction This notice was published in the Federal Register on January 31, 2012, Volume 77,...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-17
... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention [Docket Number NIOSH-248] World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP STAC or Advisory Committee), National Institute for Occupational Safety and Health (NIOSH) In accordance with section 10(a)(2) of the Federal Advisory...
ITER EDA Newsletter. Volume 3, no. 2
NASA Astrophysics Data System (ADS)
1994-02-01
This issue of the ITER EDA (Engineering Design Activities) Newsletter contains reports on the Fifth ITER Council Meeting held in Garching, Germany, January 27-28, 1994, a visit (January 28, 1994) of an international group of Harvard Fellows to the San Diego Joint Work Site, the Inauguration Ceremony of the EC-hosted ITER joint work site in Garching (January 28, 1994), on an ITER Technical Meeting on Assembly and Maintenance held in Garching, Germany, January 19-26, 1994, and a report on a Technical Committee Meeting on radiation effects on in-vessel components held in Garching, Germany, November 15-19, 1993, as well as an ITER Status Report.
AIAA Survivability Technical Committee Draft
NASA Technical Reports Server (NTRS)
Shipman, Jim; Williamson, Joel
1997-01-01
A relatively new area of interest in aerospace systems survivability is the growing threat of spacecraft penetration by orbital debris. Orbital debris, or "space junk", is composed of the man-made remnants of non-functioning spacecraft still orbiting the Earth. NASA estimates that there are currently over 100,000 orbital debris particles 1 centimeter in diameter or larger that cannot be tracked by existing radar, with the population growing at approximately 4% per year in low earth orbits. With an average velocity of over 8.7 km/sec, these projectiles can penetrate and disable many vulnerable spacecraft systems. Since the likelihood of spacecraft penetration increases with spacecraft surface area, large spacecraft (such as the International Space Station) and communication satellite fleets (such as Iridium) have begun to adopt survivability enhancement strategies similar to those employed by combat aircraft. Collision avoidance maneuvers are commonly practiced by the Space Shuttle and are planned by the International Space Station to decrease their susceptibility to impact by trackable orbital debris; likewise, improved shielding, internal equipment placement, and improved crew operations following penetration can reduce the vulnerability of spacecraft to loss following orbital debris impact. Computer simulations such as the Manned Spacecraft and Crew Survivability (MSCSurv) program at the NASA-Marshall Space Flight Center have recently been developed to quantify and reduce the likelihood of crew or spacecraft loss following orbital debris penetration. The AIAA Survivability Technical Committee is working to enable the transfer of military-developed survivability technologies to help the aerospace industry cope with this growing threat.
Using the TOEFL to measure the reading proficiency levels of deaf college applicants.
LoMaglio, L J
1991-07-01
The TOEFL is widely used by colleges and universities in the United States and Canada to measure the English language proficiency levels of hearing international applicants. At the National Technical Institute for the Deaf, a faculty committee recommended that this popular test instrument be used to measure the English reading skills of deaf international applicants to the National Technical Institute for the Deaf. This study examined the merits of using the TOEFL to measure the English reading ability of hearing post-secondary international students seeking admission to English-based colleges and universities. Forty-one hearing foreign students were tested in the fall of 1989 at the English Language Institute at SUNY Buffalo. The instruments chosen were both the TOEFL and the California Achievement Test of reading ability. The majority of the research subjects who scored between 400 and 500 on the TOEFL achieved a grade level of less than 8.0 on the California Achievement Test.
Space robotics: Recent accomplishments and opportunities for future research
NASA Technical Reports Server (NTRS)
Montgomery, Raymond C.; Buttrill, Carey S.; Dorsey, John T.; Juang, Jer-Nan; Lallman, Frederick J.; Moerder, Daniel D.; Scott, Michael A.; Troutman, Patrick; Williams, Robert L., II
1992-01-01
The Langley Guidance, Navigation, and Control Technical Committee (GNCTC) was one of six technical committees created in 1991 by the Chief Scientist, Dr. Michael F. Card. During the kickoff meeting Dr. Card charged the chairmen to: (1) establish a cross-Center committee; (2) support at least one workshop in a selected discipline; and (3) prepare a technical paper on recent accomplishments in the discipline and on opportunities for future research. The Guidance, Navigation, and Control Committee was formed and selected for focus on the discipline of Space robotics. This report is a summary of the committee's assessment of recent accomplishments and opportunities for future research. The report is organized as follows. First is an overview of the data sources used by the committee. Next is a description of technical needs identified by the committee followed by recent accomplishments. Opportunities for future research ends the main body of the report. It includes the primary recommendation of the committee that NASA establish a national space facility for the development of space automation and robotics, one element of which is a telerobotic research platform in space. References 1 and 2 are the proceedings of two workshops sponsored by the committee during its June 1991, through May 1992 term. The focus of the committee for the June 1992 - May 1993 term will be to further define to the recommended platform in space and to add an additional discipline which includes aircraft related GN&C issues. To the latter end members performing aircraft related research will be added to the committee. (A preliminary assessment of future opportunities in aircraft-related GN&C research has been included as appendix A.)
INTERNATIONAL REPORTS: New International Standards for Quantities and Units
NASA Astrophysics Data System (ADS)
Thor, A. J.
1994-01-01
Each coherent system of units is based on a system of quantities in such a way that the equations between the numerical values expressed in coherent units have exactly the same form, including numerical factors, as the corresponding equations between the quantities. The highest international body responsible for the International System of Units (SI) is the Conférence Générale des Poids et Mesures (CGPM). However, the CGPM is not concerned with quantities or systems of quantities. That question lies within the scope of Technical Committee number twelve of the International Organization for Standardization (ISO/TC 12). Quantities, units, symbols, conversion factors. To fulfil its responsibility, ISO/TC 12 has prepared the International Standard ISO 31, Quantities and Units, which consists of fourteen parts. The new editions of the different parts of the International Standard are briefly presented here.
INDC International Nuclear Data Committee
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nichols, A.; McCutchan, E.; Dimitriou, P.
The 22nd meeting of the International Network of Nuclear Structure and Decay Data Evaluators was convened at the Lawrence Berkeley National Laboratory, Berkeley, USA, from 22 to 26 May 2017 under the auspices of the IAEA Nuclear Data Section. This meeting was attended by 38 scientists from 12 Member States and the IAEA, all of whom are concerned primarily with the measurement, evaluation and dissemination of nuclear structure and decay data. A summary of the meeting, data centre reports, various proposals considered, technical discussions, actions agreed by the participants, and the resulting recommendations/conclusions are presented within this document.
CHRONICLE: Third International Symposium on Modern Optics, Budapest, September 1988
NASA Astrophysics Data System (ADS)
Bukhenskiĭ, M. F.; Nikitin, P. I.; Semenov, A. S.
1989-07-01
The Third International Symposium on Modern Optics (Optics-88), held in Budapest on 13-16 September 1988, was organized by the Hungarian Optical, Acoustic, and Cinematographic Society with the support of the International Commission on Optics and various scientific and industrial organizations in Hungary. The International Symposium Committee was composed of leading specialists from 11 countries in Asia, America, and Europe with A. M. Prokhorov (USSR) and N. Kroo (Hungary) as Co-chairmen. The purpose of this regular symposium is to summarize the scientific and technical progress underlying the developments in optics itself, discuss the branches of science where progress depends on optical methods in devices, and draw the attention of specialists to the most promising trends which should yield results in the immediate future.
Expert Technical Committee : Bay Bridge Project Assessment meeting, January 6-8, 2005.
DOT National Transportation Integrated Search
2005-01-01
The Expert Technical Committee (ETC) was formed to provide an independent review and : assessment of the history and current status of the San Francisco-Oakland Bay Bridge East Span : Seismic Retrofit Cost Increases.
Plasma Physics Network Newsletter, No. 3
NASA Astrophysics Data System (ADS)
1991-02-01
This issue of the Newsletter contains a report on the First South-North International Workshop on Fusion Theory, Tipaza, Algeria, 17-20 September, 1990; a report in the issuance of the 'Buenos Aires Memorandum' generated during the IV Latin American Workshop on Plasma Physics, Argentina, July 1990, and containing a proposal that the IFRC establish a 'Steering Committee on North-South Collaboration in Controlled Nuclear Fusion and Plasma Physics Research'; the announcement that the 14th International Conference on Plasma Physics and Controlled Nuclear Fusion will be held in Wuerzburg, Germany, September 30 to October 7, 1992; a list of IAEA technical committee meetings for 1991; an item on ITER news; an article 'Long Term Physics R and D Planning (for ITER)' by F. Engelmann; in the planned sequence of 'Reports on National Fusion Programs' contributions on the Chinese and Yugoslav programs; finally, the titles and contacts for two other newsletters of potential interest, i.e., the AAAPT (Asian African Association for Plasma Training) Newsletter, and the IPG (International physics Group-A sub unit of the American Physical Society) Newsletter.
An Incremental, Measurable Approach to Increased Seismic Safety in Latin America and the Caribbean
NASA Astrophysics Data System (ADS)
Dickey, J. S.
2001-05-01
Plans for a multiyear effort to assess and mitigate seismic risks in municipalities throughout Latin America and the Caribbean are being developed by a committee of scientists, engineers and public servants from throughout the region. Prompted by AGU and GeoHazards International, with start-up funding from the AGU Council through the AGU Committee on International Participation, the effort will involve scientists, engineers, architects, urban planners, civil defense authorities, municipal authorities, public health authorities, and commerical interests. With technical guidance provided by the project, teams of volunteers will assess risks in their own municipalities and will identify and adopt measures to reduce those risks. Planned by Latin Americans for the benefit of Latin America, the process, which is intended to run for a ten year period, will be iterative and incremental. Progress will be measurable and will be reported at triennial conferences. As an international organization, well-represented in the region and unencumbered by political or commercial relationships, AGU is able to provide effective administrative support for this challenging endeavor.
NASA Technical Reports Server (NTRS)
1921-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, expenditures, House of Representatives bill 14061, a copy of the bill introduced to the House of Representatives to regulate air navigation, and a compilation of technical reports produced.
NASA Technical Reports Server (NTRS)
1917-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, expenditures, problems, recommendations and a compilation of technical reports produced.
7 CFR 610.23 - State Technical Committee meetings.
Code of Federal Regulations, 2011 CFR
2011-01-01
... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...
7 CFR 610.23 - State Technical Committee meetings.
Code of Federal Regulations, 2013 CFR
2013-01-01
... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...
7 CFR 610.23 - State Technical Committee meetings.
Code of Federal Regulations, 2010 CFR
2010-01-01
... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...
7 CFR 610.23 - State Technical Committee meetings.
Code of Federal Regulations, 2014 CFR
2014-01-01
... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...
7 CFR 610.23 - State Technical Committee meetings.
Code of Federal Regulations, 2012 CFR
2012-01-01
... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...
FOREWORD: 9th International Conference on Compressors and their Systems
NASA Astrophysics Data System (ADS)
Kovacevic, Ahmed, Prof
2015-08-01
The 9th International Conference on Compressors and their Systems will be held in London from 5th - 9th September 2015, and as its Chairman, it is my pleasure to welcome you. This series of conferences started in 1999 organised by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE) but since 2009 it has been managed by City University London in conjunction with the IMechE and the Institute of Refrigeration, both of which have been very proactive in promoting it. The Organising committee is grateful for their support and continued encouragement. This year, after rigorous reviewing, we have accepted over 80 technical papers for publication, the highest number in the conference history. On behalf of the organising committee I would like to thank the reviewers for their hard work and assistance. In addition to the main technical sessions, this year we have introduced a third day, specifically for Industry, to consider technology, business and market drivers on compressor developments. The traditional series of the short courses is this year continuing prior to the main event with the second short course/forum on Computational Fluid Dynamics in rotating positive displacement machines. I would like to extend my special thanks to our main sponsors, Holroyd PTG, Howden and Kapp Niels for their continuing support for the conference. With their generous contributions we have managed to keep the conference fees at the same level as in 2013, despite extending it to 3 days and holding it outside the University this year. The welcome reception on Sunday 6th September 2015 is dedicated to the celebration of the 20th anniversary of the Centre for Positive Displacement Compressors Technology which was formed at City University in 1995 with support from the Royal Academy of Engineering and Holroyd; its main aim being to assist British manufacturers of screw compressors. The Centre has since made a significant impact on the screw compressor world, far beyond the British Isles and continues to grow in its support for the screw machine industry. Recently renamed the Centre for Compressors Technology, its aim has been extended to help promote the development of all types of compressors and expanders. On this occasion, I must thank all those who have helped to make this event happen. Special thanks go to Louise Gordon, Emma Leaver and Sham Rane who did most of the organisation work and to all members of the organising committee and the international liaison committee. I would like to commend Dr Kristina Soldatova who joined the international liaison committee two years ago and extensively promoted the Conference in Russia which brought a large number of papers to the Conference from that part of the world. On behalf of the conference committee I wish you successful and enjoyable conference.
ERIC Educational Resources Information Center
Tanenbaum, Marc H.; And Others
The relationship of older Americans to the new media culture of society is the focus of this Technical Committee Report. The work of two committee-appointed subcommittees on stereotypes and new media technology are explained with a special emphasis on the influence of television. Age stereotyping is examined in prime time television, daytime…
Cox report and the US-China arms control technical exchange program
DOE Office of Scientific and Technical Information (OSTI.GOV)
Di Capua, M S
The ACE program furthered the national security interests of the US by promoting technical approaches to the implementation and verification of arms control treaties that the international community embraces. The Cox Committee report suggests that uncontrolled interactions were taking place between US and Chinese nuclear weapons scientists in the course of the ACE program. On the contrary, elaborate controls were in place at the very beginning and remained in place to control the interactions and protect US national security information. The ACE program payoff to national security was just beginning and its suspension, resulting from the Cox reports allegations, ismore » a setback to US-China progress on arms control.« less
76 FR 46310 - Notice of Meetings
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-02
...). Committee Name: SAMHSA's Advisory Committee for Women's Services. Date/Time/Type: Monday, March 15, 2011... Committee for Women's Services, and SAMHSA's Tribal Technical Advisory Committee on August 16, 2011. The... Service Act, the Advisory Committee for Women's Services (ACWS) is statutorily mandated to advise the...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-02
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting; Rescheduled The Sensors and Instrumentation... that affect the level of export controls applicable to sensors [[Page 66179
Letter to the editor : Impartial review is key.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Crabtree, G. W.; Materials Science Division
The News Feature, 'Misconduct in physics: Time to wise up? [Nature 418, 120-121; 2002], raises important issues that the physical-science community must face. Argonne National Laboratory's code of ethics calls for a response very similar to that of Bell Labs, namely: 'The Laboratory director may appoint an ad-hoc scientific review committee to investigate internal or external charges of scientific misconduct, fraud, falsification of data, misinterpretation of data, or other activities involving scientific or technical matters.'
NASA Technical Reports Server (NTRS)
Ong, Cindy; Mueller, Andreas; Thome, Kurtis; Pierce, Leland E.; Malthus, Timothy
2016-01-01
Calibration is the process of quantitatively defining a system's responses to known, controlled signal inputs, and validation is the process of assessing, by independent means, the quality of the data products derived from those system outputs [1]. Similar to other Earth observation (EO) sensors, the calibration and validation of spaceborne imaging spectroscopy sensors is a fundamental underpinning activity. Calibration and validation determine the quality and integrity of the data provided by spaceborne imaging spectroscopy sensors and have enormous downstream impacts on the accuracy and reliability of products generated from these sensors. At least five imaging spectroscopy satellites are planned to be launched within the next five years, with the two most advanced scheduled to be launched in the next two years [2]. The launch of these sensors requires the establishment of suitable, standardized, and harmonized calibration and validation strategies to ensure that high-quality data are acquired and comparable between these sensor systems. Such activities are extremely important for the community of imaging spectroscopy users. Recognizing the need to focus on this underpinning topic, the Geoscience Spaceborne Imaging Spectroscopy (previously, the International Spaceborne Imaging Spectroscopy) Technical Committee launched a calibration and validation initiative at the 2013 International Geoscience and Remote Sensing Symposium (IGARSS) in Melbourne, Australia, and a post-conference activity of a vicarious calibration field trip at Lake Lefroy in Western Australia.
Status of emerging standards for removable computer storage media and related contributions of NIST
NASA Technical Reports Server (NTRS)
Podio, Fernando L.
1992-01-01
Standards for removable computer storage media are needed so that users may reliably interchange data both within and among various computer installations. Furthermore, media interchange standards support competition in industry and prevent sole-source lock-in. NIST participates in magnetic tape and optical disk standards development through Technical Committees X3B5, Digital Magnetic Tapes, X3B11, Optical Digital Data Disk, and the Joint Technical Commission on Data Permanence. NIST also participates in other relevant national and international standards committees for removable computer storage media. Industry standards for digital magnetic tapes require the use of Standard Reference Materials (SRM's) developed and maintained by NIST. In addition, NIST has been studying care and handling procedures required for digital magnetic tapes. NIST has developed a methodology for determining the life expectancy of optical disks. NIST is developing care and handling procedures for optical digital data disks and is involved in a program to investigate error reporting capabilities of optical disk drives. This presentation reflects the status of emerging magnetic tape and optical disk standards, as well as NIST's contributions in support of these standards.
Expert communities and interest-formation in the Brazilian AIDS program.
Lago, Regina Ferro do; Costa, Nilson do Rosário
2017-05-01
This paper examines the role of the Technical Advisory Committee for antiretroviral therapy of the Brazilian AIDS program in mediating the decision-making process of including new antiretroviral (ARV) drugs in the Unified Health System services by the end of the 2000s. We conducted documental analysis and interviews with key informants from the governmental sphere and professionals. The work features the Technical Advisory Committee as an "expert community", defined as a network of individuals with expertise and competence in a particular sphere and whose knowledge is relevant in critical public policy decision areas. It also indicates that the decision-making process for inclusion of antiretroviral drugs in the Brazilian program was incremental, considering the expectations of the innovative leader companies of pharmaceutical market. The work describes thus the results of the interaction of government interests, pharmaceutical industry and experts in the implementation of a relevant international policy. It provides arguments and evidence for understanding the role of expert communities on a sectorial public policy so far analyzed predominantly from the perspective of social movements.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-10-23
... DEPARTMENT OF COMMERCE Bureau of Industry and Security Sensors and Instrumentation Technical Advisory Committee; Notice of Partially Closed Meeting ``Rescheduled'' The Sensors and Instrumentation... that affect the level of export controls applicable to sensors and instrumentation equipment and...
78 FR 46331 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-31
... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY: Energy... Energy is soliciting nominations for candidates to fill vacancies on the Biomass Research and Development... INFORMATION: The Biomass Research and Development Act of 2000 (Biomass Act) [Pub. L. 106-224] requires...
76 FR 46781 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-03
... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development...: Notice of open meeting. SUMMARY: This notice announces an open meeting of the Biomass Research and... meeting of the Biomass Research and Development Technical Advisory Committee. DATES and Times: August 23...
77 FR 65542 - Hydrogen and Fuel Cell Technical Advisory Committee (HTAC)
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-29
... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Hydrogen and Fuel Cell... Energy. ACTION: Notice of Open Meeting. SUMMARY: The Hydrogen and Fuel Cell Technical Advisory Committee... Updates Congressional Fuel Cell Caucuses NREL Reports on Hydrogen in Natural Gas Pipelines and...
76 FR 9339 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-17
... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and... Biomass Research and Development Technical Advisory Committee under Section 9008(d) of the Food.... Tentative Agenda: Agenda will include the following: Update on USDA Biomass R&D Activities. Update on DOE...
77 FR 20377 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-04
... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and... Biomass Research and Development Technical Advisory Committee under Section 9008(d) of the Food... procedures, members of the public are welcome to observe the business of the Biomass Research and Development...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-12
... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention World Trade... Prevention (CDC), announces the establishment of the World Trade Center (WTC) Health Program Scientific..., Designated Federal Officer, World Trade Center Health Program Scientific/Technical Advisory Committee...
Suborbital Safety Technical Committee- Summary of Proposed Standards & Guidelines
NASA Astrophysics Data System (ADS)
Quinn, Andy; Atencia Yepez, Amaya; Klicker, Michael; Howard, Diane; Verstraeten, Joram; Other Suborbital Safety TC Members
2013-09-01
There are currently no international safety standards and guidelines to assist designers, operators and authorities in the suborbital domain. There is a launch licensing regime in the United States (US) to assist the forerunners of the suborbital domain however this does not provide a safety approval for the vehicle against set standards or does not have an acceptable level of safety to achieve in terms of design or operation. In Europe a certification framework may be implemented however this (or any regulatory framework) is not in place as yet. This paper summarises the 5 tasks thus far completed by the International Association for the Advancement of Space Safety (IAASS) Suborbital Safety Technical Committee (SS TC) in terms of deriving standards and guidelines for the suborbital domain. The SS TC comprises members from the suborbital industry (US and European vehicle designers), safety experts, legal experts, medical/training experts, prospective spaceport operators and members from the US and European authorities (though these members cannot directly steer the standards and guidelines - they can merely review them for interest and comment on non-policy aspects). The SS TC has been divided into three working groups (WG): Regulatory WG, Technical WG and Operations WG. The 5 tasks that are summarised in this paper include: Regulatory WG - (Task 1) Clarify and promote regulatory framework for suborbital flights (including discussions on Space Law 'v' Air Law for suborbital domain); Technical WG - (Task 1) Defining & Alignment (globally) of Safety Criteria for Suborbital domain using industry best practices, (Task 2) Software/complex hardware certification for suborbital flights; Operations WG - (Task 1) Flight Crew and Spaceflight Participant Medical and Training Standards & Guidelines for suborbital flight, (Task 2) Spaceport Safety Management System. This paper also details the next set of standards and guidelines that will be derived by the SS TC. The paper concludes that these and future IAASS suborbital safety standards and guidelines are needed now and should beconsidered by the industry players before the first commercial flights expected late 2013/early 2014.
77 FR 47047 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-07
... research and development leading to the production of biobased fuels and biobased products. Tentative... Research and Development Technical Advisory Committee. To attend the meeting and/or to make oral statements... at the beginning of the meeting. Reasonable provision will be made to include the scheduled oral...
77 FR 13318 - Meeting of the Mobile Sources Technical Review Subcommittee
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-06
... ENVIRONMENTAL PROTECTION AGENCY [FRL-9643-6] Meeting of the Mobile Sources Technical Review... Federal Advisory Committee Act, Public Law 92- 463, notice is hereby given that the Mobile Sources... Air Act Advisory Committee. This is an open meeting. The meeting will include discussion of current...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Benko, Heather
In carrying out its responsibilities on behalf of the United States, ANSI provides comprehensive, administrative support and expertise on international protocols and procedures to: (1) the U.S. Technical Advisory Group (TAG) to the International Organization for Standardization’s (ISO) Technical Committee (TC) 229 Nanotechnologies, and (2) the corresponding U.S. TAG Working Groups tasked with formulating U.S. positions on topics relevant to nanotechnology standardization. Additionally, secretariat and procedural support is provided for the ISO/TC 229 WG 3 on health, safety and environment, for which the United States was assigned leadership by the participating national body members of ISO/TC 229. As the officialmore » entity that serves as the U.S. representative to ISO, ANSI provides not only expert coordination of U.S. positions and representation at ISO but also strategic direction, advice and procedural expertise to facilitate navigation of international issues to promote U.S. positions for incorporation into the ISO/TC 229 program of work necessary to support U.S. objectives.« less
WHO Expert Committee on Specifications for Pharmaceutical Preparations. Fiftieth report.
2016-01-01
The Expert Committee on Specifications for Pharmaceutical Preparations works towards clear, independent and practical standards and guidelines for the quality assurance of medicines. Standards are developed by the Committee through worldwide consultation and an international consensus-building process. The following new guidelines were adopted and recommended for use. Good pharmacopoeial practices; FIP-WHO technical guidelines: points to consider in the provision by health-care professionals of children-specific preparations that are not available as authorized products; Guidance on good manufacturing practices for biological products; Guidance on good manufacturing practices: inspection report, including Appendix 1: Model inspection report; Guidance on good data and record management practices; Good trade and distribution practices for starting materials; Guidelines on the conduct of surveys of the quality of medicines; Collaborative procedure between the World Health Organization (WHO) prequalification team and national regulatory authorities in the assessment and accelerated national registration of WHO-prequalified pharmaceutical products and vaccines; Guidance for organizations performing in vivo bioequivalence studies; and World Health Organization (WHO) general guidance on variations to multisource pharmaceutical products.
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-13
... DEPARTMENT OF STATE [Public Notice 6602] Advisory Committee on International Communications and... Advisory Committee on International Communications and Information Policy (ACICIP) for an additional two... issues and concerns affecting international communications and information policy. ACICIP members are...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bolch, W E; Eckerman, Keith F; Sgouros, George
2009-03-01
The internal dosimetry schema of the Medical Internal Radiation Dose (MIRD) Committee of the Society of Nuclear Medicine has provided a broad framework for assessment of the absorbed dose to whole organs, tissue subregions, voxelized tissue structures, and individual cellular compartments for use in both diagnostic and therapeutic nuclear medicine. The schema was originally published in 1968, revised in 1976, and republished in didactic form with comprehensive examples as the MIRD primer in 1988 and 1991. The International Commission on Radiological Protection (ICRP) is an organization that also supplies dosimetric models and technical data, for use in providing recommendations formore » limits on ionizing radiation exposure to workers and members of the general public. The ICRP has developed a dosimetry schema similar to that of the MIRD Committee but has used different terminology and symbols for fundamental quantities such as the absorbed fraction, specific absorbed fraction, and various dose coefficients. The MIRD Committee objectives for this pamphlet are 3-fold: to restate its schema for assessment of absorbed dose in a manner consistent with the needs of both the nuclear medicine and the radiation protection communities, with the goal of standardizing nomenclature; to formally adopt the dosimetry quantities equivalent dose and effective dose for use in comparative evaluations of potential risks of radiation-induced stochastic effects to patients after nuclear medicine procedures; and to discuss the need to identify dosimetry quantities based on absorbed dose that address deterministic effects relevant to targeted radionuclide therapy.« less
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-25
... DEPARTMENT OF STATE [Public Notice 7813] Advisory Committee on International Communications and... Committee on International Communications and Information Policy (ACICIP) for a period of two years. The... affecting international communications and information policy. ACICIP members are private sector...
Drafting & Design Technology. Technical Committee Report.
ERIC Educational Resources Information Center
Idaho State Dept. of Education, Boise. Div. of Vocational Education.
This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in drafting and design technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and…
Electronic Technology. Technical Committee Report.
ERIC Educational Resources Information Center
Idaho State Dept. of Education, Boise. Div. of Vocational Education.
This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in electronic technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are used…
Autobody Technology. Technical Committee Report.
ERIC Educational Resources Information Center
Idaho State Dept. of Education, Boise. Div. of Vocational Education.
This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in autobody technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings and are used as…
Fundamentals of Dental Assisting. Technical Committee Report.
ERIC Educational Resources Information Center
Idaho State Dept. of Education, Boise. Div. of Vocational Education.
This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in dental assisting, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are used as…
Printing/Graphic Arts Technology. Technical Committee Report.
ERIC Educational Resources Information Center
Idaho State Dept. of Education, Boise. Div. of Vocational Education.
This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in printing and graphic arts technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry…
Applied Welding Technology. Technical Committee Report.
ERIC Educational Resources Information Center
Idaho State Dept. of Education, Boise. Div. of Vocational Education.
This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in applied welding technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are…
Automotive Technology. Technical Committee Report.
ERIC Educational Resources Information Center
Idaho State Dept. of Education, Boise. Div. of Vocational Education.
This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in automotive technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are used…
ERIC Educational Resources Information Center
Oregon State Dept. of Education, Salem. Div. of Vocational Education.
Written by a technical committee's industry representatives, state officials, and educators in Oregon, this document lists the skills and knowledge required by employees in travel and tourism occupations. The following occupations are considered: rental representative; service agent; travel agent; bus/tour/driver/guide/sightseeing leader; manager…
Industrial Maintenance Technology. Technical Committee Report.
ERIC Educational Resources Information Center
Idaho State Dept. of Education, Boise. Div. of Vocational Education.
This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in industrial maintenance technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings,…
Fringe effects of value engineering. A survey prepared by the technical subcommittee, AOA special committee on value engineering for the office of the assistant secretary of defense (installations and logistics).
The Involvement of Career and Technical Education Advisory Committees in Modularizing Curriculum
ERIC Educational Resources Information Center
Malosh, Ann M.
2012-01-01
The emergence of modularized curriculum in community college career and technical education (CTE) programs has received substantial attention over the last decade, with researchers suggesting that this type of curriculum redesign may assist with student retention and success. The purpose of this study was to describe advisory committee member…
Precision Machining Technology. Technical Committee Report.
ERIC Educational Resources Information Center
Idaho State Dept. of Education, Boise. Div. of Vocational Education.
This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in precision machining technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and…
State Technical Committee for Accounting. Official Report.
ERIC Educational Resources Information Center
Jensen, Claudia
This report contains validated task inventory listings for accounting occupations. An introductory report in brief outline form gives background of the work of the technical committee that identified the duties and tasks. This is followed by four attachments which make up most of the document. Attachment A has two parts: (1) an accounting skills…
Business Systems Specialist. Technical Committee Report.
ERIC Educational Resources Information Center
Idaho State Dept. of Education, Boise. Div. of Vocational Education.
This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job as a business systems specialist, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and…
An Inventory of Skills and Knowledge Necessary for a Career as a Nurse's Aide.
ERIC Educational Resources Information Center
Hawaii State Board for Vocational Education, Honolulu.
In September 1985, the State Board for Vocational Education in Hawaii, in conformance with federal mandates, established technical committees to assess the entry-level employment requirements for a number of occupations. Drawing from an examination of relevant curriculum materials, the Statewide Technical Committee on Health Services developed an…
Report of the Technical Committee for Marketing.
ERIC Educational Resources Information Center
Oregon State Dept. of Education, Salem. Div. of Vocational Education.
This committee report identifies the skills and knowledge required by employees in the marketing occupational area. It also provides performance objectives from which competencies and instructional objectives may be developed. Introductory materials include a list of committee members, statement of the marketing committee, information on marketing…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1986-01-01
Allan I. Mendelowitz of the General Accounting Office (GAO) and James R. Shea of the Nuclear Regulatory Commission were the principal witnesses at a hearing on international concerns about reactor safety. The hearing focused on the Soviet accident at Chernobyl as a demonstration that safety matters are a legitimate area of international concern. Among the issues under discussion were safety standards and inspection procedures of the International Atomic Energy Agency (IAEA). Estimates developed by the GAO show that developing countries, which lack a strong technical base or nuclear background to handle emergencies, will have half the reactors in the worldmore » by the year 2000. Mendelowitz and Shea, together with supporting testimony from others in their agencies described international efforts to improve safeguards.« less
Update Of The ACR-NEMA Standard Committee
NASA Astrophysics Data System (ADS)
Wang, Yen; Best, D. E.; Morse, R. R.; Horii, S. C.; Lehr, J. L.; Lodwick, G. S.; Fuscoe, C.; Nelson, O. L.; Perry, J. R.; Thompson, B. G.; Wessell, W. R.
1988-06-01
In January, 1984, the American College of Radiology (ACR) representing the users of imaging equipment and the National Electrical Manufacturers Association (NEMA) representing the manufacturers of imaging equipment joined forces to create a committee that could solve the compatibility issues surrounding the exchange of digital medical images. This committee, the ACR-NEMA Digital Imaging and Communication Standards Committee was composed of radiologists and experts from industry who addressed the problems involved in interfacing different digital imaging modalities. In just two years, the committee and three of its working groups created an industry standard interface, ACR-NEMA Digital Imaging and Communications Standard, Publication No. 300-1985. The ACR-NEMA interface allows digital medical images and related information to be communicated between different imaging devices, regardless of manufacturer or use of differing image formats. The interface is modeled on the International Standards Organization's Open Systems Interconnection sever-layer reference model. It is believed that the development of the Interface was the first step in the development of standards for Medical Picture Archiving and Communications Systems (PACS). Developing the interface Standard has required intensive technical analysis and examination of the future trends for digital imaging in order to design a model which would not be quickly outmoded. To continue the enhancement and future development of image management systems, various working groups have been created under the direction of the ACR-NEMA Committee.
12 CFR 917.7 - Audit committees.
Code of Federal Regulations, 2010 CFR
2010-01-01
... internal auditor and that the internal auditor may be removed only with the approval of the audit committee; (ii) Provide that the internal auditor shall report directly to the audit committee on substantive matters and that the internal auditor is ultimately accountable to the audit committee and board of...
12 CFR 917.7 - Audit committees.
Code of Federal Regulations, 2011 CFR
2011-01-01
... internal auditor and that the internal auditor may be removed only with the approval of the audit committee; (ii) Provide that the internal auditor shall report directly to the audit committee on substantive matters and that the internal auditor is ultimately accountable to the audit committee and board of...
78 FR 17086 - Public Hearing Before a Public Advisory Committee; Technical Amendments
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-20
... Administrative practice and procedure, Advisory committees, Color additives, Drugs, Foods, Medical Devices... device good manufacturing practice advisory committees established under section 520(f)(3) of the FD&C...) Color additive advisory committees are required to be established under the circumstances specified in...
Plasma Physics Network Newsletter, no. 5
NASA Astrophysics Data System (ADS)
1992-08-01
The fifth Plasma Physics Network Newsletter (IAEA, Vienna, Aug. 1992) includes the following topics: (1) the availability of a list of the members of the Third World Plasma Research Network (TWPRN); (2) the announcement of the fourteenth IAEA International Conference on Plasma Physics and Controlled Nuclear Fusion Research to be held in Wuerzburg, Germany, from 30 Sep. to 7 Oct. 1992; (3) the announcement of a Technical Committee Meeting on research using small tokamaks, organized by the IAEA as a satellite meeting to the aforementioned fusion conference; (4) IAEA Fellowships and Scientific Visits for the use of workers in developing member states, and for which plasma researchers are encouraged to apply through Dr. D. Banner, Head, Physics Section, IAEA, P.O. Box 100, A-1400 Vienna, Austria; (5) the initiation in 1993 of a new Coordinated Research Programme (CRP) on 'Development of Software for Numerical Simulation and Data Processing in Fusion Energy Research', as well as a proposed CRP on 'Fusion Research in Developing Countries using Middle- and Small-Scale Plasma Devices'; (6) support from the International Centre for Theoretical Physics (ICTP) for meetings held in Third World countries; (7) a report by W. Usada on Fusion Research in Indonesia; (8) News on ITER; (9) the Technical Committee Meeting planned 8-12 Sep. 1992, Canada, on Tokamak Plasma Biasing; (10) software made available for the study of tokamak transport; (11) the electronic mail address of the TWPRN; (12) the FAX, e-mail, and postal address for contributions to this plasma physics network newsletter.
34 CFR 403.12 - What are the additional responsibilities of the State board?
Code of Federal Regulations, 2010 CFR
2010-07-01
... least two) technical committees to advise the State council and the State board on the development of model curricula to address State labor market needs. The technical committees shall develop an inventory of skills that may be used by the State board to define state-of-the-art model curricula. This...
34 CFR 403.12 - What are the additional responsibilities of the State board?
Code of Federal Regulations, 2011 CFR
2011-07-01
... least two) technical committees to advise the State council and the State board on the development of model curricula to address State labor market needs. The technical committees shall develop an inventory of skills that may be used by the State board to define state-of-the-art model curricula. This...
Reading Teacher's Text Selection for Industrial Arts and Other Technical Fields.
ERIC Educational Resources Information Center
Matt, Stephen R.
To provide learners with the most reliable information, individuals and committees responsible for text selection examine texts for classroom use in steps. Since very few people have the specialized knowledge of all the technical fields like drafting, electronics, or graphics that make up the field of Industrial Arts, a committee is required to…
ERIC Educational Resources Information Center
Sykes, James T.; And Others
This Technical Committee Report on Employment begins with a discussion of trends in work and retirement, examines attitudes toward work and retirement, and describes the economic and social consequences of work. An analysis of the present situation focuses on: (1) employment barriers and opportunities; (2) cost of employment; (3) productivity and…
ERIC Educational Resources Information Center
Farber, Seymour M.; And Others
The introduction to this Technical Committee Report reviews the health status of the older population and examines major disease entities where health maintenance and promotion can play a role. Part One, "Health Maintenance and Health Promotion Services," discusses the physical and social environments, indicators of change in physical…
Priority setting for orphan drugs: an international comparison.
Rosenberg-Yunger, Zahava R S; Daar, Abdallah S; Thorsteinsdóttir, Halla; Martin, Douglas K
2011-04-01
To describe the process of priority setting for two orphan drugs - Cerezyme and Fabrazyme - in Canada, Australia and Israel, in order to understand and improve the process based on stakeholder perspectives. We conducted qualitative case studies of how three independent drug advisory committees made decisions relating to the funding of Cerezyme and Fabrazyme. Interviews were conducted with 22 informants, including committee members, patient groups and industry representatives. (1) DESCRIPTION: Orphan drugs reimbursement recommendations by expert panels were based on clinical evidence, cost and cost-effectiveness analysis. (2) EVALUATION: Committee members expressed an overall preference for the current drug review process used by their own committee, but were concerned with the fairness of the process particularly for orphan drugs. Other informants suggested the inclusion of other relevant values (e.g. lack of alternative treatments) in order to improve the priority setting process. Some patient groups suggested the use of an alternative funding mechanism for orphan drugs. Priority setting for drugs is not solely a technical process (involving cost-effective analysis, evidence-based medicine, etc.). Understanding the process by which reimbursement decisions are made for orphan drugs may help improve the system for future orphan drugs. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.
NASA Technical Reports Server (NTRS)
1956-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1949-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of Committee's activities and research accomplished, bibliographies, and financial report.
2004-01-01
The International Society for Clinical Densitometry (ISCD) held a Position Development Conference in July 2003, at which time positions developed and researched by the organization's Scientific Advisory Committee were presented to a panel of international experts in the field of bone density testing. This panel reached agreement on a series of positions that were subsequently approved by the Board of Directors of the ISCD and are now official policy of the ISCD. These positions, which are outlined in this article and discussed in greater detail in subsequent articles in this journal, include (1) affirmation of the use of the World Health Organization classification for the diagnosis of osteoporosis in postmenopausal women; (2) the diagnosis of osteoporosis in men; (3) the diagnosis of osteoporosis in premenopausal women; (4) the diagnosis of osteoporosis in children; (5) technical standards for skeletal regions of interest by dual-energy X-ray absorptiometry (DXA); (6) the use of new technologies, such as vertebral fracture assessment; (7) technical standards for quality assurance, including phantom scanning and calibration; (8) technical standards for the performance of precision assessment at bone density testing centers, and for cross-calibration of DXA devices; (9) indications for bone density testing; (10) appropriate information for a bone density report; and (11) nomenclature and decimal places for bone density reporting.
NASA Astrophysics Data System (ADS)
Possolo, Antonio; Schlamminger, Stephan; Stoudt, Sara; Pratt, Jon R.; Williams, Carl J.
2018-02-01
The Consultative Committee for Mass and related quantities (CCM), of the International Committee for weights and measures (CIPM), has recently declared the readiness of the community to support the redefinition of the international system of units (SI) at the next meeting of the General Conference on Weights and Measures (CGPM) scheduled for November, 2018. Such redefinition will replace the international prototype of the Kilogram (IPK), as the definition and sole primary realization of the unit of mass, with a definition involving the Planck constant, h. This redefinition in terms of a fundamental constant of nature will enable widespread primary realizations not only of the kilogram but also of its multiples and sub-multiples, best to address the full range of practical needs in the measurement of mass. We review and discuss the statistical models and statistical data reductions, uncertainty evaluations, and substantive arguments that support the verification of several technical preconditions for the redefinition that the CCM has established, and whose verification the CCM has affirmed. These conditions relate to the accuracy and mutual consistency of qualifying measurement results. We review also an issue that has surfaced only recently, concerning the convergence toward a stable value, of the historical values that the task group on fundamental constants of the committee on Data for Science and Technology CODATA-TGFC has recommended for h over the years, even though the CCM has not deemed this issue to be relevant. We conclude that no statistically significant trend can be substantiated for these recommended values, but note that cumulative consensus values that may be derived from the historical measurement results for h seem to have converged while continuing to exhibit fluctuations that are typical of a process in statistical control. Finally, we argue that the most recent consensus value derived from the best measurements available for h, obtained using either a Kibble balance or the XRCD method, is reliable and has uncertainty no larger than the uncertainties surrounding the current primary and secondary realizations of the unit of mass, hence that no credible technical impediments stand in the way of the redefinition of the unit of mass in terms of a fixed value of h.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hey, Tony; Agarwal, Deborah; Borgman, Christine
The Advanced Scientific Computing Advisory Committee (ASCAC) was charged to form a standing subcommittee to review the Department of Energy’s Office of Scientific and Technical Information (OSTI) and to begin by assessing the quality and effectiveness of OSTI’s recent and current products and services and to comment on its mission and future directions in the rapidly changing environment for scientific publication and data. The Committee met with OSTI staff and reviewed available products, services and other materials. This report summaries their initial findings and recommendations.
1988-01-01
This Resolution creates a Technical Committee for Women, the Family, and Population within the Ministry of Education of Peru. The Committee has as its objective strengthening and enlarging the activities executed by the Minister of Education and ensuring the permanent revaluation and promotion of the family and women in the curriculum, educational texts, and training and learning activities, as well as in the role of the media in social communication. full text
NASA Technical Reports Server (NTRS)
Radtke, Robert; Woolley, Charles; Arnold, Lana
1993-01-01
The purpose of the NASA Space Assembly and Servicing Working Group (SASWG) is to study enabling technologies for on-orbit spacecraft maintenance and servicing. One key technology required for effective space logistics activity is the development of standard spacecraft interfaces, including the 'Basic Set' defined by NASA, the U.S. Space Command, and industry panelists to be the following: (1) navigation aids; (2) grasping, berthing, and docking; and (3) utility connections for power, data, and fluids. Draft standards have been prepared and referred to professional standards organizations, including the AIAA, EIA, and SAE space standards committee. The objective of the SASWG is to support these committees with the technical expertise required to prepare standards, guidelines, and recommended practices which will be accepted by the ANSI and international standards organizations, including the ISO, IEC, and PASC.
A change of heart and a change of mind? Technology and the redefinition of death in 1968.
Giacomini, M
1997-05-01
In 1968, an ad hoc committee of Harvard faculty publicly redefined death as "brain death". What interests and issues compelled the redefinition of death, and formed the "spirit" of this precedent-setting policy? This paper reports on an historical study of the files of the Harvard ad hoc committee, the proceedings of an international conference on ethical issues in organ transplantation, and a review of the medical literature and media in the decades preceding the redefinition of death. This analysis of the technological and professional forces involved in the redefinition of death in 1968 questions two common theses: that technological "progress", primarily in the areas of life support and electroencephalography, literally created brain-dead bodies and dictated their defining features (respectively), and that Harvard's definition of brain death by committee constituted a net loss of autonomy for medicine. In fact, medical researchers through the 1960s disputed and negotiated many features of the brain death syndrome, and transplantation interests-perhaps more kidney than heart-played a particularly influential role in tailoring the final criteria put forth by Harvard in 1968. It is also doubtful whether Harvard's definition of brain death by multidisciplinary committee undermined medical privilege and autonomy. The Harvard Ad Hoc Committee may not have succeeded in establishing definitive, indisputable brain death criteria and ensuring their consistent application to all clinical cases of brain death. However, it did gain significant ground for transplant and other medical interests by (1) establishing brain death as a technical "fact" and the definition of brain death as an exercise for medical theorists, (2) involving non-medical ethics and humanities experts in supporting the technical redefinition of death, and, (3) successfully involving transplant surgeons in the redefinition of death and attempting (albeit unsuccessfully) not to exclude them from the actual diagnosis of death in individual cases.
NASA Technical Reports Server (NTRS)
1937-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1957-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1941-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1951-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1951-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1950-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1949-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1923-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, and expenditures.
NASA Technical Reports Server (NTRS)
1924-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, and expenditures.
NASA Technical Reports Server (NTRS)
1951-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1923-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, congressional report, summaries of the committee's activities and research accomplished, and expenditures.
NASA Technical Reports Server (NTRS)
1946-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1957-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1948-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1959-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1955-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1918-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, expenditures, and problems.
NASA Technical Reports Server (NTRS)
1942-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1958-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1952-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1940-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1954-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1939-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NREL: U.S. Life Cycle Inventory Database - Advisory Committee
Advisory Committee The U.S. Life Cycle Inventory (LCI) Database established an advisory committee to provide technical and financial guidance to the NREL database management team. The committee will Assessing and responding to user feedback to ensure that the database meets the needs of data providers
ERIC Educational Resources Information Center
Lopata, Helena Z.; And Others
This Technical Committee Report presents research on demographic trends, labor force participation, and public service programs which suggests a need to alter traditional assumptions about aging, family, and social supports required for an equitably integrated society. Demographic data on populations, families, and aging are provided, and…
ERIC Educational Resources Information Center
Birren, James E.; And Others
This Technical Committee Report provides an overview and historical sketch of research in aging and proposes a need for new knowledge. An examination of key issues notes the difficulty in assigning priority to research topics, and identifies emerging issues of public concern including: (1) physical health (alcohol and drugs, falls and accidents,…
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-13
... Telecommunication Advisory Committee SUMMARY: The Charter of the International Telecommunication Advisory Committee... recommendations on, telecommunication and information policy matters related to the United States' participation in the work of the International Telecommunication Union, the Permanent Consultative Committees of...
NASA Astrophysics Data System (ADS)
Livermore, C.; Velásquez-García, L. F.
2015-12-01
Greetings, and welcome to Boston, MA and PowerMEMS 2015 - the 15th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications! The objective of PowerMEMS 2015 is to catalyze innovation in micro- and nano-scale technologies for the energy domain. The scope of the meeting ranges from basic principles, to materials and fabrication, to devices and systems, to applications. The many applications of Power MEMS range from the harvesting, storage, conversion and conditioning of energy, to integrated systems that manage these processes, to actuation, pumping, and propulsion. Our Conference aims to stimulate the exchange of insights and information, as well as the development of new ideas, in the Power MEMS field. Our goal is to allow the attendees to interact and network within our multidisciplinary community that includes professionals from many branches of science and engineering, as well as energy, policy, and entrepreneurial specialists interested in the commercialization of Power MEMS technologies. Since the first PowerMEMS in Sendai, Japan in 2000, the Conference has grown in size, reputation, impact, and technical breadth. This continuing growth is evident in this year's technical program, which includes an increasing number of papers on nanomaterials, additive manufacturing for energy systems, actuators, energy storage, harvesting strategies and integrated energy harvesting systems, for example. This year's technical program is highlighted by six plenary talks from prominent experts on piezoelectrics, robotic insects, thermoelectrics, photovoltaics, nanocomposite cathodes, and thermal energy conversion systems. The contributed program received a large number of abstract submissions this year, 169 in total. After careful review by the 34-member Technical Program Committee, a total of 135 papers were selected for presentation. The 60 contributed oral presentations are arranged in two parallel sessions. The 75 posters are arranged in a ''two-in-one'' poster session in which the poster session time is divided in two; half the posters will be presented during each half-session, allowing the poster presenters to also browse the posters during the poster session. Posters will remain up during the meeting, so please feel free to peruse them at your leisure. The Proceedings will be visible and accessible through IOP after conclusion of the Conference. We hope to maximize interaction among participants and stimulate lively discussion through the technical program and social events. For the first time at the Conference, a great many sponsors are making their presence known at PowerMEMS through tabletop displays, which will catalyze engaging conversations between our industrial partners and the research community. Also, for the first time at PowerMEMS, we will host a Rump Session - an informal event in which Conference participants engage in honest and fun discussions of topics of relevance to the community while strengthening bonds within the community. This meeting is made possible by many generous contributions of time, effort, and financial support. Thanks are due to the Technical Program Committee for their intensive efforts in reviewing abstract submissions, and to the International Steering Committee for their advice and support. We are grateful to Preferred Meeting Management Inc. for their many and key contributions to the management and organization of our Conference. Finally, we gratefully acknowledge the organizational and financial support provided for this meeting by the Transducers Research Foundation, Northeastern University, the Massachusetts Institute of Technology, and our exhibitors and other supporters. We hope that you find our Conference enjoyable and fruitful, and that you enjoy your stay in the Boston, MA area.
NASA Technical Reports Server (NTRS)
1926-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the president, congressional report, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1931-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1937-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1925-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the president, congressional report, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1930-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1933-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1928-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1932-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the president, congressional report, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1929-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the president, congressional report, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1927-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the president, congressional report, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1935-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
78 FR 12771 - Notice of Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-02-25
... Committee for Women's Services, and the Tribal Technical Advisory Committee). The Councils were established..., the Advisory Committee for Women's Services (ACWS) is statutorily mandated to advise the SAMHSA Administrator and the Associate Administrator for Women's Services on appropriate activities to be undertaken by...
NASA Technical Reports Server (NTRS)
1936-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
NASA Technical Reports Server (NTRS)
1934-01-01
Report includes the National Advisory Committee for Aeronautics letter of submittal to the President, Congressional report, summaries of the committee's activities and research accomplished, bibliographies, and financial report.
78 FR 47675 - Pacific Fishery Management Council; Public Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-08-06
... Pacific Fishery Management Council's (Pacific Council) Ad Hoc Groundfish Electronic Monitoring Committee and Ad Hoc Trawl Groundfish Electronic Monitoring Technical Advisory Committee (GEM Committees) will... meeting is to discuss and develop potential alternatives for electronic monitoring (EM) for vessels...
77 FR 12065 - Notice of Meetings
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-28
... two SAMHSA Advisory Committees (Advisory Committee for Women's Services, and the Tribal Technical... 501 of the Public Health Service Act, the Advisory Committee for Women's Services (ACWS) is statutorily mandated to advise the SAMHSA Administrator and the Associate Administrator for Women's Services...
Printing system perceptual-based gloss and gloss uniformity standard (INCITS W1.1)
NASA Astrophysics Data System (ADS)
Ng, Yee S.; Cui, Luke C.; Kuo, Chung-Hui; Maggard, Eric; Mashtare, Dale; Morris, Peter; Viola, Michael
2003-12-01
To address the standarization issues of perceptually based image quality for printing systems, ISO/IEC JTC1/SC28, the standarization committee for office equipment charactered the W1.1 project with the responsibiltiy of drafting a proposal for an international standard for the evaluation of printed image quality. One of the W1.1 task teams is charactered to address the issue of 'Gloss and Gloss Uniformity". This paper summarizes the current status and technical progress of this ad hoc team in 2003.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Honrubia-Escribano, A.; Jimenez-Buendia, F.; Molina-Garcia, A.
This paper presents the current status of simplified wind turbine models used for power system stability analysis. This work is based on the ongoing work being developed in IEC 61400-27. This international standard, for which a technical committee was convened in October 2009, is focused on defining generic (also known as simplified) simulation models for both wind turbines and wind power plants. The results of the paper provide an improved understanding of the usability of generic models to conduct power system simulations.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-17
... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-095)] NASA Advisory Committee; Renewal of NASA's International Space Station Advisory Committee Charter AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of renewal and amendment of the Charter of the International...
Committee for International Conference on Mechanical Engineering Research (ICMER 2011)
NASA Astrophysics Data System (ADS)
Yusoff, Ahmad Razlan Bin
2012-09-01
Scientific Advisory Committee: 1) Prof. Dr. Ahmad Kamal Ariffin (UKM) 2) Prof. Dr. Hj. Rosli Abu Bakar (UMP) 3) Prof. Dr. Hanafi Ismail (USM) 4) Prof. Ir. Dr. Mohd Jailani Mohd Nor (MoHE) 5) Prof. Dr. Zahari Taha (UMP) 6) Prof. Dr. Masjuki Haji Hassan 7) Prof. Ir. Dr. Ramesh Singh (UNITEN) 8) Prof. Dr. Razali Ayob (UTEM) 9) Prof. Dr. Wan Khairuddin (UTM) 10) Prof. Dr. Sulaiman Hj. Hasan (UTHM) 11) Prof. Dr. Zuraidah Mohd. Zain (UniMAP) 12) Prof. Dr. Horizon Gitano (USM) 13) Prof. Dr. K.V Sharma (UMP) 14) Prof. Dr. Shahrani Anuar (UMP) 15) Assoc. Prof. Dr. Abd Rashid Abd. Aziz (UTP) 16) Assoc. Prof. Dr. Aidy Ali (UPM) 17) Assoc. Prof. Dr. Saidur Rahman (UM) 18) Assoc. Prof. Dr. Md Abdul Maleque (UIA) Organizing Committee Chairman: Prof. Dr. Hj. Rosli Abu Bakar Co-Chair: Prof. Dr. Zahari Taha Co-Chair: Prof. Ir. Dr. Jailani Salihon Secretary: Dr. Rizalman Mamat Committee on Keynote Speaker 1) Kumaran Kadirgama (Chair) 2) Prof. Dr. K.V. Sharma 3) Haji Amirruddin Abdul Kadir 4) Miminorazeansuhaila Loman 5) Mohd Akramin Mohd Romlay Technical Committee (Peer Review & Proceedings) 1) Dr. Abdul Adam Abdullah (Chair) 2) Dr. Ahmad Razlan Yusoff 3) Mohd Yusof Taib 4) Dr. Md. Mustafizur Rahman 5) Dr. Hjh. Yusnita Rahayu 6) Dr. Gigih Priyandoko 7) Dr. Agung Sudrajad 8) Muhammad Hatifi Mansor 9) Mohd Fadzil Abdul Rahim Technical Committee (Panels & Session Chairs) 1) Dr. Mahadzir Ishak (Chair) 2) Prof. Dr. Shahrani Anuar 3) Dr. Maisara Mohyeldin Gasim Mohamed 4) Muhammad Ammar Nik Mu'tasim 5) Ahmad Basirul Subha bin Alias Technical Committee (Journal Publication) 1) Dr. Ahmad Razlan bin Yusoff (Chair) 2) Mohd Yusof Taib 3) Dr. Mahadzir Ishak 4) Dr. Abdul Adam Abdullah 5) Hj. Amirruddin Abdul Kadir 6) Hadi Abdul Salaam Bureau of Publicity & Website 1) Dr. Muhamad Arifpin Mansor (Chair) 2) Amir Abdul Razak 3) Idris Mat Sahat 4) Prof. Dr. Hj. Rosli Abu Bakar 5) Muhamad Zuhairi Sulaiman 6) Dr. Sugeng Ariyono 7) Asnul Hadi Ahmad 8) Mohd Tarmizy Che Kar 9) Mohd Padzly Radzi Bureau of Special Task & Poster 1) Lee Giok Chui (Chair) 2) Mohd Fadzil Abdul Rahim 3) Che Ku Eddy Nizwan 4) Hazami Che Hussain 5) Mohd Fazli Ismail 6) Mahdhir Mohd Yusof 7) Mohd Padzly Radzi 8) Rahimah Che Ramli Secretariats 1) Ir. Ahmad Rasdan Ismail (Chair) 2) Mohd Shahri Mohd Akhir 3) Luqman Hakim Ahmad Shah 4) Juliawati Alias 5) Nurazima Ismail 6) Mohamad Faizal Mohamed Zahri 7) Raja Allen Jordan Izzuddin Shah 8) Rosidah Mohd Norsat 9) Norshalawati Mat Yusof 10) Zainab Daud 11) Nur Sufiah Jamaludin 12) Azslinda Ibrahim 13) Nurul Azreen Zainal Abidin 14) Nurul Ashikin Mohd Khalil 15) Mohd Zaki Mohd Ali
NASA Astrophysics Data System (ADS)
2014-04-01
2014 International Conference on Science & Engineering in Mathematics, Chemistry and Physics (ScieTech 2014), was held at the Media Hotel, Jakarta, Indonesia, on 13-14 January 2014. The ScieTech 2014 conference is aimed to bring together researchers, engineers and scientists in the domain of interest from around the world. ScieTech 2014 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within Mathematics, Chemistry and Physics. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 187 papers and after rigorous review, 50 papers were accepted. The participants come from 16 countries. There are 5 (Five) Paralell Sessions and Four Keynote Speakers. It is an honour to present this volume of Journal of Physics: Conference Series (JPCS) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of ScieTech 2014. The Editors of the Scietech 2014 Proceedings: Dr. Ford Lumban Gaol Dr. Benfano Soewito Dr. P.N. Gajjar
77 FR 1548 - Advisory Committee on International Economic Policy; Notice of Open Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-10
... DEPARTMENT OF STATE [Public Notice: 7721] Advisory Committee on International Economic Policy; Notice of Open Meeting The Advisory Committee on International Economic Policy (ACIEP) will meet from 2 p... of State for Economic and Business Affairs Jose W. Fernandez and Committee Chair Ted Kassinger. The...
76 FR 4987 - Advisory Committee on International Economic Policy; Notice of Open Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-27
... DEPARTMENT OF STATE [Public Notice: 7238] Advisory Committee on International Economic Policy; Notice of Open Meeting The Advisory Committee on International Economic Policy (ACIEP) will meet from 2 p... Secretary of State for Economic, Energy, and Business Affairs Jose W. Fernandez and Committee Chair Ted...
78 FR 24784 - Advisory Committee on International Economic Policy; Notice of Open Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-26
... DEPARTMENT OF STATE [Public Notice 8300] Advisory Committee on International Economic Policy; Notice of Open Meeting The Advisory Committee on International Economic Policy (ACIEP) will meet from 2... Assistant Secretary of State for Economic and Business Affairs Jose W. Fernandez and Committee Chair Ted...
77 FR 33014 - Advisory Committee on International Economic Policy; Notice of Open Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-04
... DEPARTMENT OF STATE [Public Notice 7912] Advisory Committee on International Economic Policy; Notice of Open Meeting The Advisory Committee on International Economic Policy (ACIEP) will meet from 2 p... of State for Economic and Business Affairs Jose W. Fernandez and Committee Chair Ted Kassinger. The...
76 FR 71617 - Advisory Committee on International Economic Policy; Notice of Open Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-18
... DEPARTMENT OF STATE [Public Notice 7654] Advisory Committee on International Economic Policy; Notice of Open Meeting The Advisory Committee on International Economic Policy (ACIEP) will meet from 2 p... of State for Economic, Energy, and Business Affairs Jose W. Fernandez and Committee Chair Ted...
77 FR 57180 - Advisory Committee on International Economic Policy; Notice of Open Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-09-17
... DEPARTMENT OF STATE [Public Notice 8022] Advisory Committee on International Economic Policy; Notice of Open Meeting The Advisory Committee on International Economic Policy (ACIEP) will meet from 2 p... of State for Economic and Business Affairs Jose W. Fernandez and Committee Chair Ted Kassinger. The...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-03
... DEPARTMENT OF STATE [Public Notice 8539] Activities of the International Telecommunication Advisory Committee and Preparations for Upcoming International Telecommunications Meetings This notice announces a meeting of the Department of State's International Telecommunication Advisory Committee (ITAC...
NASA Astrophysics Data System (ADS)
2014-09-01
Dear Colleagues, 1st International School and Conference "Saint Petersburg OPEN 2014" on Optoelectronics, Photonics, Engineering and Nanostructures was held on March 25 - 27, 2014 at St. Petersburg Academic University - Nanotechnology Research and Education Centre of the Russian Academy of Sciences. The School and Conference included a series of invited talks given by leading professors with the aim to introduce young scientists with actual problems and major advances in physics and technology. The keynote speakers were: Mikhail Glazov (Ioffe Physico-Technical Institute RAS, Russia) Vladimir Dubrovskii (Saint Petersburg Academic University RAS, Russia) Alexey Kavokin (University of Southampton, United Kingdom and St. Petersburg State University, Russia) Vladimir Korenev (Ioffe Physico-Technical Institute RAS, Russia) Sergey Kukushkin (Institute of Problems of Mechanical Engineering RAS, Russia) Nikita Pikhtin (Ioffe Physico-Technical Institute RAS, Russia and "Elfolum" Ltd., Russia) Dmitry Firsov (Saint Petersburg State Polytechnical University, Russia) During the poster session all undergraduate and graduate students attending the conference presented their works. Sufficiently large number of participants with more than 160 student attendees from all over the world allowed the Conference to provide a fertile ground for the fruitful discussions between the young scientists as well as to become a perfect platform for the valuable discussions between student authors and highly experienced scientists. The best student papers, which were selected by the Program Committee and by the invited speakers basing on the theses and their poster presentation, were awarded with diplomas of the conference - see the photos. This year's School and Conference is supported by SPIE (The International Society for Optics and Photonics), OSA (The Optical Society), St. Petersburg State Polytechnical University and by Skolkovo Foundation. It is a continuation of the annual schools and seminars for youth on topical problems of physics and technology that is organized by the Academic University since 2009. We invite all the students and young scientists to attend "Saint Petersburg OPEN" in 2015! Please, find details at http://spbopen2015.spbau.com/ With best wishes, Editorial Board, Program and Organizing Committees
La Forgia, G M
1985-01-01
Since the late 1970s the WHO and other international agencies have placed much emphasis on strategies of community organization in order to improve preventive health services and facilities in rural areas. Many countries have recently set out to reform their rural health systems by means of a community-based approach. Panama's 15 years of experience in 'community health' provide insight into the constraints to program continuity at the national level and to maintenance of participatory mechanisms (health committees) at the village level. This paper focuses on the present status of the Community Health Program and level of activity of the health committees. This study is based on in-depth interviewing of key program participants at three contexts: central ministry, district/regional health institutions and rural communities. It sought to discover how interactions among and within these contexts affected program services and community participation. Inconsistent outcomes are evident. In some areas the Community Health Program thrives and the health committees are active, while in most areas the program functions at a minimal level and most health committees are inactive. Several factors are identified which affect a 'successful' or 'unsuccessful' program environment. These include: degree of support from medical directors of district and regional health centers, existence of 'federations of health committees', the extent of political interference, the presence of a functional 'technical health team' and degree of community confidence in health committee officers.
ERIC Educational Resources Information Center
Cowell, Daniel D.
This collection of abstracts, designed to assist White House Conference on Aging delegates involved with research on aging, presents information from 16 Technical Committee Reports which focus on implications of an age-integrated society, employment, support systems, health issues and services, the family, long-term care, older Americans as a…
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-05
... DEPARTMENT OF STATE [Public Notice 7714] Department of State Advisory Committee on Private International Law: Notice of Renewal of Charter The Charter of the Department of State's Advisory Committee on... Committee assists the State Department to monitor domestic and international developments in private...
76 FR 1663 - Announcement of a Meeting of the International Telecommunication Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-11
... Telecommunication Advisory Committee SUMMARY: This notice announces a meeting of the International Telecommunication Advisory Committee (ITAC) to prepare for the International Telecommunication Union (ITU) World Conference on International Telecommunications, as well as for the Organization of American States' Inter...
78 FR 22345 - Advisory Committee on the Electronic Records Archives (ACERA)
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-15
... NATIONAL ARCHIVES AND RECORDS ADMINISTRATION Advisory Committee on the Electronic Records Archives... and Records Administration (NARA) announces a meeting of the Advisory Committee on the Electronic... United States, on technical, mission, and service issues related to the Electronic Records Archives (ERA...
77 FR 21812 - Advisory Committee on the Electronic Records Archives (ACERA).
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-11
... NATIONAL ARCHIVES AND RECORDS ADMINISTRATION Advisory Committee on the Electronic Records Archives... and Records Administration (NARA) announces a meeting of the Advisory Committee on the Electronic... United States, on technical, mission, and service issues related to the Electronic Records Archives (ERA...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-19
... balance on each committee will also be sought. Nominations: Nominating a person to serve on any of the... indicating the specific committee for which the individual is being nominated, why the nominee wants to be a... and will not adversely affect his or her ability to serve as an advisor on the U.S. agriculture...
76 FR 53165 - Advisory Committee on International Economic Policy; Notice of Open Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-25
... on Women in International Economic Policy. This meeting is open to public participation, though... DEPARTMENT OF STATE [Public Notice 7457] Advisory Committee on International Economic Policy; Notice of Open Meeting The Advisory Committee on International Economic Policy (ACIEP) will meet from 2 p...
77 FR 60454 - Exxon Valdez Oil Spill Public Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-03
... Committee consists of 10 members representing the following principal interests: Sport hunting and fishing, conservation and environmental, public-at-large, recreation users, commercial tourism, science/technical...
75 FR 37783 - DOE/NSF Nuclear Science Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-30
... Science Foundation's Nuclear Physics Office. Technical Talk on Deep Underground Science and Engineering... Energy's Office of Nuclear Physics Web site for viewing. Rachel Samuel, Deputy Committee Management...
78 FR 65689 - Technical Mapping Advisory Council
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-01
... DEPARTMENT OF HOMELAND SECURITY Federal Emergency Management Agency [Docket ID FEMA-2013-0039] Technical Mapping Advisory Council AGENCY: Federal Emergency Management Agency, DHS. ACTION: Committee Management; Request for Applicants for Appointment to the Federal Emergency Management Agency's Technical...
Dynamical systems theory and applications
NASA Astrophysics Data System (ADS)
Awrejcewicz, Jan
2006-08-01
The 7th International Conference devoted to "Dynamical Systems-Theory and Applications" hold in 8-11 December, 2003 in Łódź, Poland, and it was organized by the staff of Department of Automatics and Biomechanics of the Technical University of Łódź. It was financially supported by the Rector of the Technical University of Łódź and the Department of Education and Physical Culture of the Łódź City Hall. The members of the International Scientific Committee included: Igor V. Andrianov (Dniepropetrovsk), Jan Awrejcewicz (Łódź), Iliya Blekhman (Sankt Petersburg), Roman Bogacz (Warszawa), Dick van Campen (Eindhoven), Zbigniew Engel (Kraków), Lothar Gaul (Stuttgart), Józef Giergiel (Kraków), Michał Kleiber (Warszawa), Vadim A. Krysko (Saratov), Włodzimierz Kurnik (Warszawa), Claude-Henri Lamarque (Lyon), Leonid I. Manevitch (Moscow), Jan Osiecki (Warszawa), Wiesaw Ostachowicz (Gdańsk), Ladislav Pust (Prague), Giuseppe Rega (Rome), Tsuneo Someya (Tokyo), Zbigniew Starczewski (Warszawa), Eugeniusz Świtoński (Gliwice), Andrzej Tylikowski (Warszawa), Tadeusz Uhl (Kraków), Aleksander F. Vakakis (Illinois), Józef Wojnarowski (Gliwice).
NASA Technical Reports Server (NTRS)
Mabey, D. G.; Chambers, J. R.
1986-01-01
From May 6 to 9, 1985, the Fluid Dynamics Panel and Flight Mechanics Panel of AGARD jointly arranged a Symposium on Unsteady Aerodynamics-Fundamentals and Applications to Aircraft Dynamics at the Stadthall, Goettingen, West Germany. This Symposium was organized by an international program committee chaired by Dr. K. J. Orlik-Ruckemann of the Fluid Dynamics Panel. The program consisted of five sessions grouped in two parts: (1) Fundamentals of Unsteady Aerodynamics; and (2) Applications to Aircraft Dynamics. The 35 papers presented at the 4 day meeting are published in AGARD CP 386 and listed in the Appendix. As the papers are already available and cover a very wide field, the evaluators have offered brief comments on every paper, followed by an overall evaluation of the meeting, together with some general conclusions and recommendations.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-27
... NUCLEAR REGULATORY COMMISSION Advisory Committee on Reactor Safeguards (ACRS); Meeting of the ACRS Subcommittee on Reliability & PRA; Notice of Meeting The ACRS Subcommittee on Reliability & PRA will hold a..., 2013. Cayetano Santos, Chief, Technical Support Branch, Advisory Committee on Reactor Safeguards. [FR...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-17
... DEPARTMENT OF STATE [Public Notice 7545] U.S. Department of State Advisory Committee on Private International Law: Notice of Annual Meeting The Department of State's Advisory Committee on Private International Law (ACPIL) will hold its annual meeting on developments in private international law on Thursday...
22 CFR 181.7 - Transmittal to the Congress.
Code of Federal Regulations, 2010 CFR
2010-04-01
....7 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL AGREEMENTS COORDINATION, REPORTING AND... Foreign Relations and to the House Committee on International Relations. (c) The Assistant Legal Adviser... Committee on Foreign Relations and to the House Committee on International Relations. (d) Pursuant to...
78 FR 66964 - International Space Station Advisory Committee; Charter Renewal
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-07
... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: (13-128)] International Space Station Advisory Committee; Charter Renewal AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of renewal and amendment of the charter of the International Space Station Advisory Committee...
Asian Network of Research Resource Centers.
Lee, Sunhee; Nam, Seungjoo; Jung, Paul E; Kim, Ki-Jeong; Lee, Yeonhee
2016-10-01
With the enactment of the Nagoya Protocol, biological resources are now increasingly considered as assets of an individual country, instead of as the common property of mankind. As worldwide interest for securing biological resources intensifies, research resource centers (RRCs), which collect, preserve, and provide resources and their information to academia and industries, are gathering more attention. The Asian Network of Research Resource Centers (ANRRC) strives for conservation and effective use of bioresources and their data by connecting resource centers of Asia, a continent with the greatest diversity of life. Since its foundation in 2009, the Network has significantly expanded to encompass 103 RRCs of 14 countries. Through the Network, member countries discuss opportunities for resource exchange and research collaboration and share biobanking information and regulations of different countries for international harmonization of resource management. ANRRC also contributes to developing of International Standards of biobanks and biological resources as a liaison to the International Organization for Standardization technical committee 276 Biotechnology.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Akopov, Zaven; Amerio, Silvia; Asner, David
2013-03-27
Data from high-energy physics (HEP) experiments are collected with significant financial and human effort and are mostly unique. An inter-experimental study group on HEP data preservation and long-term analysis was convened as a panel of the International Committee for Future Accelerators (ICFA). The group was formed by large collider-based experiments and investigated the technical and organisational aspects of HEP data preservation. An intermediate report was released in November 2009 addressing the general issues of data preservation in HEP. This paper includes and extends the intermediate report. It provides an analysis of the research case for data preservation and a detailedmore » description of the various projects at experiment, laboratory and international levels. In addition, the paper provides a concrete proposal for an international organisation in charge of the data management and policies in high-energy physics.« less
Future space experiments on cosmic rays and radiation on Russian segments of ISS
DOE Office of Scientific and Technical Information (OSTI.GOV)
Panasyuk, Mikhail; Galper, Arkady; Stozhov, Yurii
1999-01-22
The report presents a survey of the Russian space program in the field of radiation and cosmic ray studies. The experimental projects were developed by scientists of different Russian Institutes and are intended for implementation on the future ISS. All the projects mentioned in this report have undergone various expertise stages in the Space Council of the Russian Science Academy ('Cosmic Ray Physics' section); the International Science-Technology Center of the Rocket-Space Corporation 'Energia' ('Astrophysics and radiation Measurements' section); Committee on Science-Technical Co-operation of the Russian Space Agency.
Strategic Plan for the Spanish Academy of Dermatology and Venerology (AEDV): FuturAEDV 2013-2017.
Ribera Pibernat, M; Moreno Jiménez, J C; Valcuende Cavero, F; Soto de Delás, J; Vázquez Veiga, H; Lázaro Ochaíta, P; Giménez Arnau, A
2014-09-01
The Spanish Academy of Dermatology and Venereology (AEDV) has decided that a Strategic Plan is needed to help the association adapt to new circumstances and anticipate future developments. 1) To position the AEDV as a medical association that can exert an influence in everything related to dermatology. 2) To contribute to the development of the specialty, strengthening the prestige and reputation of dermatology and dermatologists. 3) To establish a model for operating and strategic thinking that can be handed on to successive Boards of Directors and will enable the Academy to identify future challenges. The approach used to develop the Strategic Plan was as follows: analysis of trends in the health care system; assessment of the current situation of AEDV and of dermatology in general through an internal analysis based on surveys and interviews with academics; analysis of strengths, weaknesses, opportunities, and threats; preparation of a mission statement; and identification, development, and implementation of a strategy map prioritizing strategic lines of action. The strategy map set out 16 general goals grouped into 4 main topics (achieving the vision, internal and external customers, internal processes, and innovation) and detailed in an action plan with 19 initiatives, each with specific actions. The plan will be monitored by the Strategic Plan Monitoring Committee, which is made up of the members of the Standing Committee and the chairs of the 9 Technical Committees responsible for implementing the initiatives. The Functional Plan should guide the management of AEDV until 2017, and its implementation will enable the association to contribute to the development and prestige of the specialty and position itself as a reference in terms of its functional model. Copyright © 2014 Elsevier España, S.L.U. y AEDV. All rights reserved.
The International Planetary Data Alliance (IPDA)
NASA Astrophysics Data System (ADS)
Stein, Thomas; Gopala Krishna, Barla; Crichton, Daniel J.
2016-07-01
The International Planetary Data Alliance (IPDA) is a close association of partners with the aim of improving the quality of planetary science data and services to the end users of space based instrumentation. The specific mission of the IPDA is to facilitate global access to, and exchange of, high quality scientific data products managed across international boundaries. Ensuring proper capture, accessibility and availability of the data is the task of the individual member space agencies. The IPDA is focused on developing an international standard that allows discovery, query, access, and usage of such data across international planetary data archive systems. While trends in other areas of space science are concentrating on the sharing of science data from diverse standards and collection methods, the IPDA concentrates on promoting governing data standards that drive common methods for collecting and describing planetary science data across the international community. This approach better supports the long term goal of easing data sharing across system and agency boundaries. An initial starting point for developing such a standard will be internationalization of NASA's Planetary Data System's (PDS) PDS4 standard. The IPDA was formed in 2006 with the purpose of adopting standards and developing collaborations across agencies to ensure data is captured in common formats. It has grown to a dozen member agencies represented by a number of different groups through the IPDA Steering Committee. Member agencies include: Armenian Astronomical Society, China National Space Agency (CNSA), European Space Agency (ESA), German Aerospace Center (DLR), Indian Space Research Organization (ISRO), Italian Space Agency (ASI), Japanese Aerospace Exploration Agency (JAXA), National Air and Space Administration (NASA), National Centre for Space Studies (CNES), Space Research Institute (IKI), UAE Space Agency, and UK Space Agency. The IPDA Steering Committee oversees the execution of projects and coordinates international collaboration. In executing its mission, the IPDA conducts a number of focused projects to enable interoperability, construction of compatible archives, and the operation of the IPDA as a whole. These projects have helped to establish the IPDA and to move the collaboration forward. A key project that is currently underway is the implementation of the PDS4 data standard. Given the international focus, it has been critical that the PDS and the IPDA collaborate on its development. Also, many other projects have been conducted successfully, including the IPDA Requirements Document, Data Dictionary Modelling, ESA Registry Integration, the Tools Registry, and several demonstrations of interoperability protocols applied to specific missions and data sets (PDS4/PDAP (Planetary Data Access Protocol), Venus Express Interoperability). The IPDA has grown significantly since its first meetings back in November 2006. The steering committee is composed today of 28 members from 24 countries or international organizations. In addition, a technical expert group composed of 20 members from participating countries provides supportive input on technical and compatibility issues. A number of IPDA projects are ongoing, including the creation of the Memorandum of Understanding (MOU) template for international missions; the investigation of IVOA/IPDA (International Virtual Observatory Alliance-IVOA) interaction; PDS4 implementation project; the development of international registries to enable registration and search of data, tools and services; and Chandrayaan-1 interoperability project with PDAP. In addition, the IPDA continues with outreach activities, being present or represented at national and international levels and at meetings such as COSPAR, AGU, EPSC, and EGU. Further information on IPDA activities, standards, and tools are available at the web page http://www.planetarydata.org. Tool and service developers are encouraged to register their products at the IPDA web site.
International Council on Archives, Microfilm Committee. Bulletin 2.
ERIC Educational Resources Information Center
International Council on Archives. Microfilm Committee.
The second bulletin of the Microfilm Committee of the International Council on Archives begins with a short history of the origins of the committee. A brief discussion of the committee's 1972 Moscow meeting follows, as does the table of contents of a book on microfilming standards which is being developed by the committee to be published by…
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-07
... Committee Working Group Meeting. SUMMARY: A working group of the Merchant Marine Personnel Advisory Committee (MERPAC) will meet to work on Task Statement 77 concerning the development of new performance...-Technical Ratings. This meeting will be open to the public. DATES: A MERPAC working group will meet on...
76 FR 53816 - Advisory Committee; Change of Name and Function; Technical Amendment
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-30
... amending the standing advisory committees' regulations to change the name and function of the Anesthetic...: FDA is announcing that the name of the Anesthetic and Life Support Drugs Advisory Committee, which was established on May 1, 1978, has been changed. The Agency decided that the name ``Anesthetic and Analgesic Drug...
The International Planetary Data Alliance (IPDA): Activities in 2010-2012
NASA Astrophysics Data System (ADS)
Crichton, Daniel; Beebe, Reta; Kasaba, Yasumasa; Sarkissian, Alain; Capria, Maria Teresa; Hughes, Steven; Osuna, Pedro
2012-07-01
The IPDA is an international collaboration of space agencies with a mission of providing access to scientific data returned from solar system missions archived at international data centers. In order to improve access and share scientific data, the IPDA was founded to develop data and software standards. The IPDA has focused on promoting standards that drive common methods for collecting and describing planetary science data. An initial starting point for developing such a standard has been the internationalization of NASA's Planetary Data System (PDS) standard, which has become a de-facto standard. The IPDA has also focused on developing software standards that promote interoperability through the use of common software protocols allowing agencies to link their systems together. The IPDA has made significant progress since its inaugural meeting in 2006 adopting standards and developing collaborations across agencies to ensure data is captured in common formats. It has also grown to approximately eight agencies represented by a number of different groups through the IPDA Steering Committee [1]. The IPDA Steering Committee oversees the execution of projects. Over the past two years, the IPDA Steering Committee has conducted a number of focused projects around the development of these standards to enable interoperability, construction of compatible archives, and the operation of the IPDA as a whole. These projects have helped to establish the IPDA and to bring together the collaboration. Two key projects have been: development of a common protocol for data exchange, the Planetary Data Access Protocol (PDAP); and collaboration with the NASA Planetary Data System (PDS) on the next generation PDS standards, PDS4.. Both of these are progressing well and have draft standards that are now being tested. More recently, the IPDA has formed a Technical Experts Group (TEG) that is responsible for the technical architecture and implementation of the projects. As agencies implement archive systems, it is essential that the standards and software support exists and provide guidance to ensure that agencies can develop IPDA compatible archives. This talk will cover the results of the IPDA projects over the 2010-2012 timeframe. It will also discuss the plans for the next two years including the focus on ensuring that the IPDA standards for both the system and data are accessible for use by the international planetary science community. Finally, it will discuss progress on linking planetary archive systems together so scientists can access archived data regardless of the location. [1] http://planetarydata.org/members
75 FR 72778 - Pipeline Safety: Technical Pipeline Safety Advisory Committee Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-26
... pipeline safety regulations to the remaining unregulated rural onshore hazardous liquid low-stress... Low-Stress Lines'' on June 22, 2010 (75 FR 35366). The meeting agenda will include the committee's...
NASA Astrophysics Data System (ADS)
Lumban Gaol, Ford; Rizwan Hussain, Raja; Pandiangan, Tumpal; Desai, Amit
2013-06-01
Banner The 2013 International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME 2013), was held at the Grand Royal Panghegar Hotel, Bandung, Indonesia, from 9-10 March 2013. The MOIME 2013 conference brought together researchers, engineers and scientists in the field from around the world. MOIME 2013 aimed to promote interaction between the theoretical, experimental, and applied communities, so that a high level exchange was achieved in new and emerging areas within Material Engineering, Industrial Engineering and all areas that related to Optimization. We would like to express our sincere gratitude to all in the Technical Program Committee who reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 103 papers and after rigorous review, 45 papers were accepted. The participants came from 16 countries. There were six Plenary and Invited Speakers. It is an honour to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) and we deeply thank the authors for their enthusiastic and high-grade contribution. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the conference sponsors for the financial support that contributed to the success of MOIME 2013. The Editors of the MOIME 2013 Dr Ford Lumban Gaol Dr Raja Rizwan Hussain Tumpal Pandiangan Dr Amit Desai The PDF contains the abstracts from the plenary and invited articles and the workshop.
2014 International Conference on Manufacturing, Optimization, Industrial and Material Engineering
NASA Astrophysics Data System (ADS)
Lumban Gaol, Ford; Webb, Jeff; Ding, Jun
2014-06-01
The 2nd International Conference on Manufacturing, Optimization, Industrial and Material Engineering 2014 (MOIME 2014), was held at the Grand Mercure Harmoni, Opal Room 3rd Floor, Jakarta, Indonesia, during 29-30 March 2014. The MOIME 2014 conference is designed to bring together researchers, engineers and scientists in the domain of interest from around the world. MOIME 2014 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within Material Engineering, Industrial Engineering and all areas that relate to Optimization. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 97 papers and after rigorous review, 24 papers were accepted. The participants come from 7 countries. There are 4 (four) parallel session and 2 Invited Speakers and one workshop. It is an honour to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of MOIME 2014. The Editors of the MOIME 2014 Proceedings Editors Dr Ford Lumban Gaol Jeff Webb, PhD Professor Jun Ding, PhD
NASA Astrophysics Data System (ADS)
Lumban Gaol, Ford; Webb, Jeff; Ding, Jun
2015-05-01
The 3rd International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME 2015) was held at the Sheraton Kuta, Bali, Indonesia, from 28 - 29 March 2015. The MOIME 2015 conference is aimed to bring together researchers, engineers and scientists in the domain of interest from around the world. MOIME 2015 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within Material Engineering, Industrial Engineering and all areas that relate to Optimization. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program, as well as the invited and plenary speakers. This year, we received 99 papers and after rigorous review, 24 papers were accepted. The participants come from eight countries. There were four parallel sessions and two invited speakers. It is an honour to present this volume of IOP Conference Series: Materials Science and Engineering (MSE) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of MOIME 2015. The Editors of the MOIME 2015 Proceedings Dr. Ford Lumban Gaol Jeff Webb, Ph.D Prof. Jun DING, Ph.D
PREFACE: 8th International Conference on Advanced Infocomm Technology (ICAIT 2015)
NASA Astrophysics Data System (ADS)
Qiu, M.; Zhao, W.; Shum, P. Ping
2016-02-01
The 2015 IEEE 8th International Conference on Advanced Infocomm Technology (ICAIT 2015) was held in Hangzhou, China, during 25-27, October 2015, following the successes of previous events held in Shenzhan, Xi'an, Haikou, Wuhan, Paris, Hsinchu, and Fuzhou. This year the ICAIT 2015 aimed to bring together researchers, developers, and users in both industry and academia in the world for sharing state-of-art results, for exploring new areas of research and development, and to discuss emerging issues on advanced infocomm technology. The conference was hosted by Zhejiang University and China Satellite Maritime Tracking and Control Department. It was organized by the State Ley Laboratory of Modern Optical Instrumentation of Zhejiang University, in collaboration with the Joint International Research Laboratory of Photonics of Zhejiang University. More than 150 international participants from 9 foreign countries attended the conference. The ICAIT 2015 was featured with 4 plenary lectures (by Xiaoyi Bao, Benjamin J. Eggleton, Min Gu, and Chinlon Lin, respectively), and 40 invited talks, in which a wide range of topics were covered and the most recent significant results were presented. Including oral and poster presentations, 138 abstracts were presented in the conference, some of which were selected to publish in full papers in this edition of Journal of Physics: Conference Series. With the excellent quality of the presentations, the ICAIT 2015 was a success. We also wish to thank the sponsors of the conference, and particularly the technical program committee and the local organizing committee.
PREFACE: International Conference on Structural Nano Composites (NANOSTRUC 2012)
NASA Astrophysics Data System (ADS)
Njuguna, James
2012-09-01
Dear Colleagues It is a great pleasure to welcome you to NanoStruc2012 at Cranfield University. The purpose of the 2012 International Conference on Structural Nano Composites (NanoStruc2012) is to promote activities in various areas of materials and structures by providing a forum for exchange of ideas, presentation of technical achievements and discussion of future directions. NanoStruc brings together an international community of experts to discuss the state-of-the-art, new research results, perspectives of future developments, and innovative applications relevant to structural materials, engineering structures, nanocomposites, modelling and simulations, and their related application areas. The conference is split in 7 panel sessions, Metallic Nanocomposites and Coatings, Silica based Nanocomposites, safty of Nanomaterials, Carboin based Nanocomposites, Multscale Modelling, Bio materials and Application of Nanomaterials. All accepted Papers will be published in the IOP Conference Series: Materials Science and Engineering (MSE), and included in the NanoStruc online digital library. The abstracts will be indexed in Scopus, Compedex, Inspec, INIS (International Nuclear Information System), Chemical Abstracts, NASA Astrophysics Data System and Polymer Library. Before ending this message, I would like to acknowledge the hard work, professional skills and efficiency of the team which ensured the general organisation. As a conclusion, I would like to Welcome you to the Nanostruc2012 and wish you a stimulating Conference and a wonderful time. On behalf of the scientific committee, Signature James Njuguna Conference Chair The PDF of this preface also contains committee listings and associates logos.
Final Technical Report -- GEO-VI - USGEO
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hirsch, Leonard
2009-11-30
Representatives of US earth observations departments and agencies, other participating governments, NGOs and civil society participated in the Sixth Plenary Meeting of the Group on Earth Observations (GEO-VI), hosted by the United States in Washington, DC on November 17 and 18, 2009. The meeting was held in the Atrium Ballroom of the Ronald Reagan International Trade Center. Exhibitions of international Earth observation technology and programs were held concurrently in the same venue. A number of GEO committee meetings and side events were held in conjunction with the GEO-VI Plenary, including the GEO-IGOS Symposium on Earth observation science and applications, themore » GEOSS in the Americas Forum on Coastal Zones, and separate meetings of the GEO Communities of Practice on Carbon, Health, and Air Quality.« less
Editorial Conference Comments by the General Chair
NASA Astrophysics Data System (ADS)
Reed, Robert A.
2017-01-01
The 53rd IEEE Nuclear and Space Radiation Effects Conference (NSREC) was held July 11-15, 2016, at the Oregon Convention Center in Portland; the conference hotel was the Portland Doubletree. The NSREC is recognized as one of the premier international conferences on radiation effects in electronic materials, devices, and systems. The 2016 conference continued this tradition with a strong technical program, a one-day tutorial short course, radiation effects data workshop, industrial exhibit, and meetings for the IEEE Women in Engineering and Young Professionals organizations. The conference was sponsored by the Radiation Effects Committee of the IEEE Nuclear and Plasma Sciences Society (NPSS), and supported by Atmel, BAE Systems, Boeing, Cobham Semiconductor Solutions, Freebird Semiconductor, Honeywell, International Rectifier, Intersil Corporation, Jet Propulsion Laboratory, Northrop Grumman, Southwest Research Institute, and VPT Rad.
Technical comments are provided to the Air and waste Management Associations AB-3 committee for potential inclusion into the committee's comments to be made at EPA's 8th Conference on Air Quality Modeling. Computational Fluid Dynamics (CFD) simulations can model specific cases wh...
78 FR 42148 - Advisory Committee on International Economic Policy; Notice of Open Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-15
... DEPARTMENT OF STATE [Public Notice 8380] Advisory Committee on International Economic Policy; Notice of Open Meeting The Advisory Committee on International Economic Policy (ACIEP) will meet from 2... for Multinational Enterprises. This meeting is open to public participation, though seating is limited...
Energy Materials Coordinating Committee (EMaCC). Annual technical report, Fiscal Year 2001
DOE Office of Scientific and Technical Information (OSTI.GOV)
None, None
2002-08-01
The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ruth, Mark
2016-12-06
Hydrogen is a flexible, clean energy carrying intermediate that enables aggressive market penetration of renewables while deeply decarbonizing our energy system. H2 at Scale is a concept that supports the electricity grid by utilizing energy without other demands at any given time and also supports transportation and industry by providing low-priced hydrogen to them. This presentation is an update to the Hydrogen Technical Advisory Committee (HTAC).
LBNL report of the vetting review of the GRETINA project
DOE Office of Scientific and Technical Information (OSTI.GOV)
Robinson, K.E.; Bercovitz, J.H.; Bieser, F.S.
GRETINA is a gamma-ray detector array capable of reconstructing the energy and spatial positions of gamma-ray interactions within the germanium crystals. It will be used to study the structure and stability of nuclei under various conditions. The new capabilities provided by gamma-ray tracking will give large gains in sensitivity for a large number of experiments, particularly those aimed at nuclei far from beta stability. A proposal for GRETINA was submitted to DOE in June 2003. It presented the scientific case, the readiness of technical development, the design, the suggested management organizations, and a proposed cost and schedule. The GRETINA proposalmore » received its CD0 approval in August 2003. The CD-1 review will be held on December 3 and 4, 2003, and will be handled by the DOE-N. This report presents the charge to the GRETINA vetting review committee, and the findings, comments and recommendations of this committee. The purpose of this project vetting review was to assure that the GRETINA project is on track to provide DOE and the nuclear physics community with the agreed upon deliverables within the agreed upon budget and schedule. The vetting review committee was asked to cover both technical and management aspects of the GRETINA Project. Reviewers offer expert knowledge in relevant areas and provide recommendations and findings to the project's management team. Upon successful completion, the Laboratory's Integrated Project Management Office (IPMO) will recommend signoff of the project to the Laboratory Directorate. The GRETINA vetting review committee was asked to consider all relevant aspects of the project's management, project execution plan (PEP), technical approach and status, cost estimate, resources, schedule and risk and, in doing so, to advise as to whether the GRETINA Project was likely to successfully provide the agreed upon deliverables within the agreed upon budget and schedule. The review committee was asked to identify any project areas that may be incomplete for the current phase in the project and any area of significant risk for the project reaching its objectives. The committee was also asked to review and evaluate the technical status of the project and advise on any concerns or significant technical risks.« less
Payne, Deborah A; Baluchova, Katarina; Peoc'h, Katell H; van Schaik, Ron H N; Chan, K C Allen; Maekawa, Masato; Mamotte, Cyril; Russomando, Graciela; Rousseau, François; Ahmad-Nejad, Parviz
2017-04-01
Multiple organizations produce guidance documents that provide opportunities to harmonize quality practices for diagnostic testing. The International Organization for Standardization ISO 15189 standard addresses requirements for quality in management and technical aspects of the clinical laboratory. One technical aspect addresses the complexities of the pre-examination phase prior to diagnostic testing. The Committee for Molecular Diagnostics of the International Federation for Clinical Chemistry and Laboratory Medicine (also known as, IFCC C-MD) conducted a survey of international molecular laboratories and determined ISO 15189 to be the most referenced guidance document. In this review, the IFCC C-MD provides case-based examples illustrating the value of select pre-examination processes as these processes relate to molecular diagnostic testing. Case-based examples in infectious disease, oncology, inherited disease and pharmacogenomics address the utility of: 1) providing information to patients and users, 2) designing requisition forms, 3) obtaining informed consent and 4) maintaining sample integrity prior to testing. The pre-examination phase requires extensive and consistent communication between the laboratory, the healthcare provider and the end user. The clinical vignettes presented in this paper illustrate the value of applying select ISO 15189 recommendations for general laboratory to the more specialized area of Molecular Diagnostics. Copyright © 2016 Elsevier B.V. All rights reserved.
NASA Technical Reports Server (NTRS)
Marshall, Jospeh R.; Morris, Allan T.
2007-01-01
Since 2003, AIAA's Computer Systems and Software Systems Technical Committees (TCs) have developed a database that aids technical committee management to map technical topics to their members. This Topics/Interest (T/I) database grew out of a collection of charts and spreadsheets maintained by the TCs. Since its inception, the tool has evolved into a multi-dimensional database whose dimensions include the importance, interest and expertise of TC members and whether or not a member and/or a TC is actively involved with the topic. In 2005, the database was expanded to include the TCs in AIAA s Information Systems Group and then expanded further to include all AIAA TCs. It was field tested at an AIAA Technical Activities Committee (TAC) Workshop in early 2006 through live access by over 80 users. Through the use of the topics database, TC and program committee (PC) members can accomplish relevant tasks such as: to identify topic experts (for Aerospace America articles or external contacts), to determine the interest of its members, to identify overlapping topics between diverse TCs and PCs, to guide new member drives and to reveal emerging topics. This paper will describe the origins, inception, initial development, field test and current version of the tool as well as elucidate the benefits and insights gained by using the database to aid the management of various TC functions. Suggestions will be provided to guide future development of the database for the purpose of providing dynamics and system level benefits to AIAA that currently do not exist in any technical organization.
CCSDS - Advancing Spaceflight Technology for International Collaboration
NASA Technical Reports Server (NTRS)
Kearney, Mike; Kiely, Aaron; Yeh, Penshu; Gerner, Jean-Luc; Calzolari, Gian-Paolo; Gifford, Kevin; Merri, Mario; Weiss, Howard
2010-01-01
The Consultative Committee for Space Data Systems (CCSDS) has been developing data and communications standards since 1982, with the objective of providing interoperability for enabling international collaboration for spaceflight missions. As data and communications technology has advanced, CCSDS has progressed to capitalize on existing products when available and suitable for spaceflight, and to develop innovative new approaches when available products fail. The current scope of the CCSDS architecture spans the end-to-end data architecture of a spaceflight mission, with ongoing efforts to develop and standardize cutting-edge technology. This manuscript describes the overall architecture, the position of CCSDS in the standards and international mission community, and some CCSDS processes. It then highlights in detail several of the most interesting and critical technical areas in work right now, and how they support collaborative missions. Special topics include: Delay/Disruption Tolerant Networking (DTN), Asynchronous Message Service (AMS), Multispectral/Hyperspectral Data Compression (MHDC), Coding and Synchronization, Onboard Wireless, Spacecraft Monitor and Control, Navigation, Security, and Time Synchronization/Correlation. Broad international participation in development of CCSDS standards is encouraged.
Sanders, Peter; Ernste-Nota, Veronica; Visser, Klaas; van Soest, Jeroen; Brunt, Kommer
2017-09-01
A method using high-performance anion-exchange chromatography (HPAEC) with a pulsed amperometric detector (PAD) for the determination of mono- and disaccharides is described. The method was accepted by the International Dairy Federation and the Internal Organization for Standardization as a new work item for the determination of sugars in dairy matrixes, and the Milk and Milk Products technical committee of ISO/TC 34/SC 5 accepted the topic "Milk and milk products - Determination of the sugar contents - High-performance anion-exchange chromatographic method (HPAEC-PAD)" as a new work item. The proposed method consists of an aqueous ethanol extraction of the sugars in the dairy sample, followed by clarification with Carrez I and II reagents. The clarified filtrate is diluted and then directly introduced in the HPAEC-PAD system for quantification of the sugars. A single-laboratory validation of the proposed method has been scheduled for spring 2017.
75 FR 42813 - Advisory Committee on International Economic Policy; Notice of Open Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-22
... DEPARTMENT OF STATE [Public Notice: 7092] Advisory Committee on International Economic Policy; Notice of Open Meeting The Advisory Committee on International Economic Policy (ACIEP) will meet from 2 p... 1107, Washington, DC. The meeting will be hosted by the Assistant Secretary of State for Economic...
76 FR 75599 - Advisory Committee on International Economic Policy; Notice of Meeting Cancellation
Federal Register 2010, 2011, 2012, 2013, 2014
2011-12-02
... DEPARTMENT OF STATE [Public Notice: 7659] Advisory Committee on International Economic Policy; Notice of Meeting Cancellation The meeting of the Advisory Committee on International Economic Policy... Investment: Attracting Inbound Foreign Direct Investment to the U.S. and highlight the U.S.- Turkey Economic...
75 FR 67804 - Advisory Committee on International Economic Policy; Notice of Open Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-03
... DEPARTMENT OF STATE [Public Notice 7224] Advisory Committee on International Economic Policy; Notice of Open Meeting The Advisory Committee on International Economic Policy (ACIEP) will meet from 2 p...., Room 1105, Washington, DC. The meeting will be hosted by the Assistant Secretary of State for Economic...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-19
... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-074)] NASA International Space Station Advisory Committee and the Aerospace Safety Advisory Panel; Meeting AGENCY: National Aeronautics and Space... meeting of the NASA International Space Station Advisory Committee and the Aerospace Safety Advisory Panel...
75 FR 16894 - Advisory Committee on International Economic Policy; Notice of Open Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-02
....S. Government in a solely advisory capacity, and provides advice concerning issues and challenges in... DEPARTMENT OF STATE [Public Notice 6910] Advisory Committee on International Economic Policy; Notice of Open Meeting The Advisory Committee on International Economic Policy (ACIEP) will meet from 2 p...
78 FR 70392 - Notice of Meeting of Advisory Committee on International Law
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-25
... Law A meeting of the Department of State's Advisory Committee on International Law will take place on... Law School (Frederick Lawrence Student Conference Center), 2000 H Street NW., Washington, DC. Acting... Director, Advisory Committee on International Law, United States Department of State. [FR Doc. 2013-28232...
77 FR 2271 - Technical Advisory Committees; Notice of Recruitment of Private-Sector Members
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-17
... range of goods, technologies, and software presently controlled for national security, non-proliferation.... Members of the Committees will not be compensated for their services. The seven TACs are responsible for...
75 FR 62509 - Technical Advisory Committees; Notice of Recruitment of Private-Sector Members
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-12
... range of goods, technologies, and software presently controlled for national security, non-proliferation.... Members of the Committees will not be compensated for their services. The seven TACs are responsible for...
PREFACE: 8th International Symposium of the Digital Earth (ISDE8)
NASA Astrophysics Data System (ADS)
2014-02-01
Proceedings of the 8th International Symposium of Digital Earth (8th ISDE) 2013 Kuching, Sarawak, Malaysia, 26th-29th August, 2013 Conference logo This proceedings consists of the peer-reviewed papers from 8th International Symposium for Digital Earth (ISDE) held in Kuching, Sarawak, Malaysia during 26th-29th August, 2013. The 8th ISDE was a successful event in the Symposium Series of the International Society of Digital Earth, that was previously held in China (1999), Canada (2001), Czech Republic (2003), Japan (2005), the United States (2007), China (2009), and Australia (2011). The 8th ISDE, with the theme 'Transforming Knowledge into Sustainable Practice' aims to enable digital earth scientists, experts and professionals related to the field of geospatial science and technology to provide a brand new opportunity to share their ideas and insights on how we share knowledge and act together globally. In addition, the ISDE symposium series has been providing a venue for researchers and industry practitioners to discuss new ideas, collaborate to solve complex solutions to various complex problems, and importantly, pave new ways in digital earth environment. This 8th ISDE included 20 technical sessions, workshops and student sessions in various areas of digital earth; ranging from digital earth vision & innovation; earth observation technologies; ICT technologies (including spatial data infrastructures); empowering the community and engaging society; applications and innovation of digital earth for environmental applications such as hazard, pollution, flood, air quality, disaster and health, biodiversity, sustainability, forestry, early warning and emergency management, national security, natural resource management and agriculture; mining, energy and resources development; transformation towards sustainable low carbon society; digital city and green cities: towards urban sustainability; and managing water environment for sustainable development. The success of the 8th ISDE was due to commitments of many: authors, keynote speakers, session chairs, the organising committee, technical and scientific committee, student volunteers from Universiti Teknologi Malaysia (UTM) and Universiti Malaysia Sarawak (UNIMAS), and many others of various roles. We acknowledged all sponsors to 8th ISDE, namely Sarawak Convention Bureau, Malaysia Convention & Exhibition Bureau, and ESRI. We also thanked all exhibitors and contributors of the 8th ISDE: TSKAY Technologies Sdn Bhd, Coordinates-India, Taylor & Francis-Singapore, Beijing Space Eye-China, RS&GIS Consultancy, CRCSI-Australia, Jurupro Sdn Bhd, Inst of Remote Sensing and Digital Earth (RADI)-China, Department of Survey and Mapping Malaysia, SPECIM, Satellite Imaging (M) Sdn Bhd, IPASA-UTM, Sustainable Research Alliance-UTM, Sarawak Forest Department, International Society of Digital Earth-China, INSTeG-UTM, and UNIMAS. August 2013 Mazlan Hashim Samsudin Ahmad Yin Chai Wang Details of the organisation and committees are available in the PDF
NASA Astrophysics Data System (ADS)
Tanaka, Shuji
2009-09-01
This special issue of the Journal of Micromechanics and Microengineering features papers selected from The 8th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2008) with the 2nd Symposium on Micro Environmental Machine Systems (μMEMS 2008). The workshop was held in Sendai, Japan on 9-12 November 2008 by Tohoku University. This is the second time that the PowerMEMS workshop has been held in Sendai, following the first workshop in 2000. Power MEMS is one of the newest categories of MEMS, which encompasses microdevices and microsystems for power generation, energy conversion and propulsion. The first concept of Power MEMS was born in the late 1990's from a MEMS-based gas turbine project at Massachusetts Institute of Technology. After that, the research and development of Power MEMS have been promoted by the strong need for compact power sources with high energy and/or power density. Since its inception, Power MEMS has expanded to include not only various MEMS-based power generators but also small energy machines and microdevices for macro power generators. Previously, the main topics of the PowerMEMS workshop were miniaturized gas turbines and micro fuel cells, but recently, energy harvesting has been the hottest topic. In 2008, energy harvesting had a 41% share in the 118 accepted regular papers. This special issue includes 19 papers on various topics. Finally, I would like to express my sincere appreciation to the members of the International Steering Committee, the Technical Program Committee, the Local Organizing Committee and financial supporters. This special issue was edited in collaboration with the staff of IOP Publishing.
NASA Astrophysics Data System (ADS)
Ganikhodjaev, Nasir; Mukhamedov, Farrukh; Hee, Pah Chin
2013-04-01
The 4th International Conference on the Advancement of Science and Technology 2012 (iCAST 2012), with theme 'Contemporary Mathematics, Mathematical Physics and their Applications', took place in Kuantan, Malaysia, from Wednesday 7 to Friday 9 November 2012. The conference was attended by more than 100 participants, and hosted about 160 oral and poster papers by more than 140 pre-registered authors. The key topics of the 4th iCAST 2012 include Pure Mathematics, Applied Mathematics, Theoretical/Mathematical Physics, Dynamical Systems, Statistics and Financial Mathematics. The scientific program was rather full since after the Keynote and Invited Talks in the morning, four parallel sessions ran every day. However, according to all attendees, the program was excellent with a high level of talks and the scientific environment was fruitful; thus all attendees had a creative time. The conference aimed to promote the knowledge and development of high-quality research in mathematical fields concerned with the application of other scientific fields as well as modern technological trends in physics, chemistry, biology, medicine, economics, sociology and environmental sciences. We would like to thank the Keynote and the Invited Speakers for their significant contributions to 4th iCAST 2012. We would also like to thank the members of the International Scientific Committee and the members of the Organizing Committee. We cannot end without expressing our many thanks to International Islamic University Malaysia and our sponsors for their financial support . This volume presents selected papers which have been peer-reviewed. The editors hope that it may be useful and fruitful for scholars, researchers, and advanced technical members of the industrial laboratory facilities for developing new tools and products. Guest Editors Nasir Ganikhodjaev, Farrukh Mukhamedov and Pah Chin Hee The PDF contains the committee lists, board list and biographies of the plenary speakers.
Analysis of the Internal Bed Regulation Committees from hospitals of a Southern Brazilian city
Soares, Vinícius Sabedot
2017-01-01
ABSTRACT Objective To evaluate the composition of the Internal Regulation Committees created in hospitals of a capital city. Methods A cross-sectional descriptive study assessing the structure, processes and results of each Committee. Results The main reasons for implementing the committees were legal issues and overcrowding in the emergency department. The most monitored indicators were the occupancy rate and the mean length of stay, and the most observed results were reductions in the latter. Institutional protocols were developed in 70% of cases, and the degree of support that the Internal Regulation Committee received from the hospital managers was high, despite being only average the support received from the medical teams. Promoting the efficient use of beds seemed to be the main goal. To achieve it, the Internal Regulation Committee had to control hospital capacity at levels that allowed proper and safe bed turnover for patients. The strategies for this were varied and needed to integrate administrative and care issues. Conclusion The Internal Regulation Committees were a management tool with great potential and promising results in the experiences evaluated. PMID:29091157
Report of the Tape Recorder Action Plan Committee, 21 March 1972
NASA Technical Reports Server (NTRS)
1972-01-01
A NASA/AF Tape Recorder Action Plan Committee was formed in January 1972 to investigate tape recorder problems and to recommend an action plan to NASA management. The committee collected data on tape recorder failure history, pinpointed problem areas, discussed needed technical and management changes, and proposed an action plan for the recommended approaches.
Taylor, Rod S; Hutton, John; Culyer, Anthony J
2002-01-01
One of the principal roles of the National Institute for Clinical Excellence (NICE) is to appraise selected existing and emerging healthcare technologies and, as a result, produce guidance for the National Health Service (NHS) in England and Wales. A central part of this appraisal is the potential for manufacturers and sponsors to make a data submission. This paper describes the process of development of the second edition of technical guidance to manufacturers and sponsors for submission to NICE. The revision process took place during the period May 2000 and January 2001 and involved a number of key steps -- establishment of a guidance steering committee, review of current international guidelines of clinical and cost effectiveness, drafting of the guidance, detailed consultation with stakeholders, revision of the guidance and, finally, publication. The lessons learnt from revision of the NICE guidance for manufacturers and sponsors and some main issues for its future development are discussed.
NASA Technical Reports Server (NTRS)
1924-01-01
This nomenclature for aeronautics was prepared by a special conference on aeronautical nomenclature by the Executive Committee of the National Advisory Committee for Aeronautics at a meeting held August 11, 1933. This publication supersedes all previous publications of the committee on this subject. The purpose of the committee in the preparation and publication of this report is to secure uniformity in the official documents of the government and, as far as possible, in technical and other commercial publications.
76 FR 20051 - Advisory Committee for International Science & Engineering; Notice of Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-11
... NATIONAL SCIENCE FOUNDATION Advisory Committee for International Science & Engineering; Notice of... Engineering ( 25104). Date/Time: April 25, 2011; 8:30 a.m. to 5 p.m. April 26, 2011; 8:30 a.m. to 12 p.m... International Science and Engineering, Reports from Advisory Committee Working Groups. April 26, 2011 AM...
75 FR 70961 - Notice of Meeting of the Advisory Committee on International Law
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-19
... DEPARTMENT OF STATE [Public Notice: 7233] Notice of Meeting of the Advisory Committee on International Law A meeting of the Advisory Committee on International Law will take place on Thursday, December... the public up to the capacity of the meeting room. It is anticipated that the agenda of the meeting...
75 FR 1339 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-11
...), Building 33, Cloud Room, 53560 Hull Street, San Diego, California 92152. The Committee advises the Office... Session 1. Welcome and Introduction. 2. Working Groups Reports. 3. Industry Presentations. 4. New Business...
BI-NATIONAL LOWER FOOD WEB ASSESSMENT: 2005 BENTHOS RESULTS
Findings have been generated as part of a bi-national coordinated partnership for lakewide sampling to support needs expressed by the Great Lakes Fisheries Committee, the Lake Superior Technical Committee, and the Lake Superior LaMP.
78 FR 5774 - Technical Advisory Committees; Notice of Recruitment of Private-Sector Members
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-28
... producing a broad range of goods, technologies, and software presently controlled for national security, non... four times per year. Members of the Committees will not be compensated for their services. The seven...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Boyack, B.E.; Dhir, V.K.; Gieseke, J.A.
1992-03-01
MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. The newest version of MELCOR is Version 1.8.1, July 1991. MELCOR development has reached the point that the United States Nuclear Regulatory Commission sponsored a broad technical review by recognized experts to determine or confirm the technical adequacy of the code for the serious and complex analyses it is expected to perform. For this purpose, an eight-member MELCOR Peer Review Committee was organized. The Committee has completed its review of the MELCOR code: the review process and findingsmore » of the MELCOR Peer Review Committee are documented in this report. The Committee has determined that recommendations in five areas are appropriate: (1) MELCOR numerics, (2) models missing from MELCOR Version 1.8.1, (3) existing MELCOR models needing revision, (4) the need for expanded MELCOR assessment, and (5) documentation.« less
ERIC Educational Resources Information Center
Washington State Community Coll. District 17, Spokane.
Speeches and discussions are transcribed in this report, which also includes a listing of the American Technical Education Association (ATEA) committee members, exhibitors, officers, and directory of speakers. Speeches covered "Human Resource Development" by Gene Rutledge; "The Impact of Technical Education on Economic…
NASA Astrophysics Data System (ADS)
Tanaka, Shuji; Toriyama, Toshiyuki
2005-09-01
This special issue of the Journal of Micromechanics and Microengineering features papers selected from the Fourth International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2004). The workshop was held in Kyoto, Japan, on 28-30 November 2004, by The Ritsumeikan Research Institute of Micro System Technology in cooperation with The Global Emerging Technology Institute, The Institute of Electrical Engineers of Japan, The Sensors and Micromachines Society, The Micromachine Center and The Kyoto Nanotech Cluster. Power MEMS is one of the newest categories of MEMS, which encompasses microdevices and microsystems for power generation, energy conversion and propulsion. The first concept of power MEMS was proposed in the late 1990s by Epstein's group at the Massachusetts Institute of Technology, where they continue to study MEMS-based gas turbine generators. Since then, the research and development of power MEMS have been promoted by the need for compact power sources with high energy and power density. Since its inception, power MEMS has expanded to include not only various MEMS-based power generators but also small energy machines and microdevices for macro power generators. At the last workshop, various devices and systems, such as portable fuel cells and their peripherals, micro and small turbo machinery, energy harvesting microdevices, and microthrusters, were presented. Their power levels vary from ten nanowatts to hundreds of watts, spanning ten orders of magnitude. The first PowerMEMS workshop was held in 2000 in Sendai, Japan, and consisted of only seven invited presentations. The workshop has grown since then, and in 2004 there were 5 invited, 20 oral and 29 poster presentations. From the 54 papers in the proceedings, 12 papers have been selected for this special issue. I would like to express my appreciation to the members of the Organizing Committee and Technical Program Committee. This special issue was edited in collaboration with Professor Toshiyuki Toriyama (Ritsumeikan University), Co-chair of the Technical Program Committee, and the Institute of Physics Publishing staff.
Technical Services Workstations. SPEC Kit 213.
ERIC Educational Resources Information Center
Brugger, Judith M., Comp.; And Others
Technical services workstations (TSWs) are personal computers that have been customized for use in technical services departments. To gather information on their use and prevalence in research libraries, the Program for Cooperative Cataloging Standing Committee on Automation surveyed the 119 members of the Association of Research Libraries (ARL)…
75 FR 16461 - Meeting of the Mobile Sources Technical Review Subcommittee
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-01
... ENVIRONMENTAL PROTECTION AGENCY Meeting of the Mobile Sources Technical Review Subcommittee AGENCY... Committee Act, Public Law 92- 463, notice is hereby given that the Mobile Sources Technical Review... site: http://www.epa.gov/air/caaac/mobile_sources.html . MSTRS listserver subscribers will receive...
76 FR 51001 - Environmental Technologies Trade Advisory Committee Public Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-17
... DEPARTMENT OF COMMERCE International Trade Administration Environmental Technologies Trade Advisory Committee Public Meeting AGENCY: International Trade Administration, DOC. ACTION: Notice of... meeting of the Environmental Technologies Trade Advisory Committee (ETTAC). DATES: The meeting is...
Fayyaz Khan, Humaira; Farooq Danish, Khalid; Saeed Awan, Azra; Anwar, Masood
2013-05-01
The purpose of the study was to identify technical item flaws in the multiple choice questions submitted for the final exams for the years 2009, 2010 and 2011. This descriptive analytical study was carried out in Islamic International Medical College (IIMC). The Data was collected from the MCQ's submitted by the faculty for the final exams for the year 2009, 2010 and 2011. The data was compiled and evaluated by a three member assessment committee. The data was analyzed for frequency and percentages the categorical data was analyzed by chi-square test. Overall percentage of flawed item was 67% for the year 2009 of which 21% were for testwiseness and 40% were for irrelevant difficulty. In year 2010 the total item flaws were 36% and 11% testwiseness and 22% were for irrelevant difficulty. The year 2011 data showed decreased overall flaws of 21%. The flaws of testwisness were 7%, irrelevant difficulty were 11%. Technical item flaws are frequently encountered during MCQ construction, and the identification of flaws leads to improved quality of the single best MCQ's.
28 CFR 301.309 - In-person hearing before the committee.
Code of Federal Regulations, 2011 CFR
2011-07-01
... time set for that hearing, show good cause for failure to appear. (b) In conducting the hearing, the Committee is not bound by common law or statutory rules of evidence, or by technical or formal rules of...
28 CFR 301.309 - In-person hearing before the committee.
Code of Federal Regulations, 2010 CFR
2010-07-01
... time set for that hearing, show good cause for failure to appear. (b) In conducting the hearing, the Committee is not bound by common law or statutory rules of evidence, or by technical or formal rules of...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-06
... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration RIN 0648-XZ33 Advisory Committee to the U.S. Section of the International Commission for the Conservation of Atlantic Tunas (ICCAT... International Commission for the Conservation of Atlantic Tunas (ICCAT) meeting, the Advisory Committee to the U...
ERIC Educational Resources Information Center
Dole, Janice; And Others
A study followed three textbook adoption committees as they evaluated basal reading programs. The committees used "A Guide to Selecting Basal Reading Programs" (developed at the Center for the Study of Reading) to help them evaluate the quality of instruction in existing programs. Case studies of the three committees sought to address the…
ERIC Educational Resources Information Center
Employment and Training Administration (DOL), Washington, DC. Office of Work-Based Learning.
In preparing Phase I of the Strategic Plan, the Federal Committee on Apprenticeship noted that efforts beyond education and technical assistance may be needed to develop apprenticeship fully in the United States. Specifically, the committee would examine and make recommendations with respect to such issues as incentives for participation,…
Matar, M; Picone, O; Dalmon, C; Ayoubi, J-M
2013-09-01
To evaluate the sonographers' knowledge of the National Technical Committee of Ultrasound's recommendations concerning second trimester ultrasound. Anonymous questionnaire was sent by e-mails containing 25 questions about demographic elements, the practice of second trimester ultrasound and the recommendations of the National Technical Committee of Ultrasound about second trimester ultrasound. Six hundred and eighty-four responses were obtained. Six hundred and fifty-three upon 684 (95%) of respondents practice second trimester ultrasound and 635 upon 653 (97%) know about the existence of the report of the National Technical Committee of Ultrasound. The rates of correct answers concerning recommended biometrical images vary between 97% for the biparietal diameter and head circumference, 98% for abdominal circumference and 100% for the femur length. While for morphological images, rates vary between 52% and 100%. A subgroup analysis (whether the respondents have already read the recommendations or not) showed that those who had read the recommendations have significantly better results than those who did not. Those who have already read the recommendations have better knowledge and global knowledge can be improved. National recommendations serve to promote a policy of quality assurance of ultrasound and may be used in medicolegal issues. The societies that make recommendations should more diffuse their work and practitioners should make effort to pursue the continuing medical education and to implement the recommendations. Copyright © 2013 Elsevier Masson SAS. All rights reserved.
A survey. Financial accounting and internal control functions pursued by hospital boards.
Gavin, T A
1984-09-01
Justification for a board committee's existence is its ability to devote time to issues judged to be important by the full board. This seems to have happened. Multiple committees pursue more functions than the other committee structures. Boards lacking an FA/IC committee pursue significantly fewer functions than their counterparts with committees. Substantial respondent agreement exists on those functions most and least frequently pursued, those perceived to be most and least important, and those perceived to be most and least effectively undertaken. Distinctions between committee structures and the full board, noted in the previous paragraph, hold true with respect to the importance of functions. All board structures identified reviewing the budget and comparing it to actual results as important. Committee structures are generally more inclined to address functions related to the work of the independent auditor and the effectiveness of the hospital's system and controls than are full board structures. Functions related to the internal auditor are pursued least frequently by all FA/IC board structures. The following suggestions are made to help boards pay adequate attention to and obtain objective information about the financial affairs of their hospitals. Those boards that do not have some form of an FA/IC committee should consider starting one. Evidence shows chief financial officers have been a moving force in establishing and strengthening such committees. Boards having a joint or single committee structure should consider upgrading their structure to either a single committee or multiple committees respectively. The complexity of the healthcare environment requires that more FA/IC functions be addressed by the board. The board or its FA/IC committee(s) should meet with their independent CPA's, fiscal intermediary auditors, and internal auditors. Where the hospital lacks an internal audit function a study should be undertaken to determine the feasibility of initiating such a function. In most cases, the benefits derived from an independent, properly staffed internal audit function far exceed the cost of such a function.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Usher, Sam
2007-07-01
Integrating Natural and Social Sciences to Inspire Public Confidence in Radioactive Waste Policy Case Study: Committee on Radioactive Waste Management Implementing effective long-term radioactive waste management policy is challenging, and both UK and international experience is littered with policy and programme failures. Policy must not only be underpinned by sound science and technical rationale, it must also inspire the confidence of the public and other stakeholders. However, in today's modern society, communities will not simply accept the word of scientists for setting policy based purely on technical grounds. This is particularly so in areas where there are significant social andmore » ethical issues, such as radioactive waste disposal. To develop and implement effective policy, governments, waste owners and implementing bodies must develop processes which effectively integrate both complex technical and scientific issues, with equally challenging social and ethical concerns. These integrating processes must marry often intricate technical issues with broad public and stakeholder engagement programmes, in programmes which can expect the highest levels of public scrutiny, and must invariably be delivered within challenging time and budget constraints. This paper considers a model for how such integrating processes can be delivered. The paper reviews, as a case study, how such challenges were overcome by the Committee on Radioactive Waste Management (CoRWM), which, in July 2006, made recommendations to the UK government for the establishment of a long-term radioactive waste policy. Its recommendations were underpinned by sound science, but also engendered public confidence through undertaking the largest and most significant deliberative public and stakeholder engagement programme on a complex policy issue in the UK. Effective decision-making was enabled through the integration of both proven and bespoke methodologies, including Multi-criteria Decision Analysis and Holistic assessments, coupled with an overarching deliberative approach. How this was managed and delivered to programme demonstrates how important effective integration of different issues, interests and world views can be achieved, and the paper looks forward to how the continued integration of both natural and social sciences is essential if public confidence is to be maintained through implementation stages. This paper will be particularly relevant to governments, waste owners and implementing bodies who are responsible for developing and implementing policy. (author)« less
2004-01-01
Following publication of the proceedings from the first Position Development Conference (PDC) of the International Society for Clinical Densitometry (ISCD), members of the ISCD Scientific Advisory Committee (SAC) addressed additional topics of interest in the field of bone densitometry. These topics were addressed at a subsequent PDC, which was held in Cincinnati, Ohio, July 25-27, 2003. Five topics were chosen for discussion: (1) the diagnosis of osteoporosis in men, premenopausal women, and children; (2) technical standardization for dual-energy X-ray absorptiometry (DXA); (3) indications for bone densitometry; (4) reporting of bone density results; and (5) nomenclature and decimal places for bone densitometry. This report describes the methodology used for the development, presentation, and finalization of PDC positions. These positions are discussed in the following papers.
Thomas, Karluss; Bannon, Gary; Hefle, Susan; Herouet, Corinne; Holsapple, Michael; Ladics, Gregory; MacIntosh, Sue; Privalle, Laura
2005-12-01
The ILSI Health and Environmental Sciences Institute (HESI) hosted an expert workshop 22-24 February 2005 in Mallorca, Spain, to review the state-of-the-science for conducting a sequence homology/bioinformatics evaluation in the context of a comprehensive allergenicity assessment for novel proteins, to obtain consensus on the value and role of bioinformatics in evaluating novel proteins, and to discuss the utility and methods of allergen-specific IgE testing in the diagnosis of food allergy. The workshop participants included over forty international experts from academia, industry, and government. The workshop was hosted by the HESI Protein Allergenicity Technical committee, which has established a long-term program whose mission is to advance the scientific understanding of the relevant parameters for characterizing the allergenic potential of novel proteins.
Lianidou, Evi; Ahmad-Nejad, Parviz; Ferreira-Gonzalez, Andrea; Izuhara, Kenji; Cremonesi, Laura; Schroeder, Maria-Eugenia; Richter, Karin; Ferrari, Maurizio; Neumaier, Michael
2014-09-25
Molecular techniques are becoming commonplace in the diagnostic laboratory. Their applications influence all major phases of laboratory medicine including predisposition/genetic risk, primary diagnosis, therapy stratification and prognosis. Readily available laboratory hardware and wetware (i.e. consumables and reagents) foster rapid dissemination to countries that are just establishing molecular testing programs. Appropriate skill levels extending beyond the technical procedure are required for analytical and diagnostic proficiency that is mandatory in molecular genetic testing. An international committee (C-CMBC) of the International Federation for Clinical Chemistry (IFCC) was established to disseminate skills in molecular genetic testing in member countries embarking on the respective techniques. We report the ten-year experience with different teaching and workshop formats for beginners in molecular diagnostics. Copyright © 2014 Elsevier B.V. All rights reserved.
Ngoasong, Michael Zisuh
2011-01-01
This paper explores the nature and type of policy transfer promoted by global health partnerships to facilitate access to medication in Cameroon and the associated implementation challenges. Using concepts from policy transfer, multi-level governance and the politics of scale, the paper conceptualizes the social spaces (global-national-local linkages) through which global health policies are negotiated as transcalar networks. The framework is used to analyse policy documents, technical and media reports and journal articles focusing on two global health partnerships (GHPs)-Roll Back Malaria and the Accelerating Access Initiative-in Cameroon. Both GHPs helped to create the national Malaria and HIV/AIDS programmes in Cameroon, respectively. Global policies are negotiated through dialogue processes involving global, national and local partners who constitute the national HIV/AIDS and malaria committees. Successful policy transfer is evident from the consensual nature of decision-making. Analysis of policy implementation reveals that GHPs offer a 'technical fix' based on specific medical intervention programmes with a relatively limited focus on disease prevention. The GHP approach imposes new governance challenges due to policy resistance strategies (strategic interests of international agencies and country-specific challenges). Evidence of this is seen in the existence of several overlapping programmes and initiatives that distort accountability and governance mechanisms defined by the national committees. Finally, the implications of these challenges for achieving access to medication are discussed.
Hanlon, Paul; Brorby, Gregory P; Krishan, Mansi
2016-05-01
Processing (eg, cooking, grinding, drying) has changed the composition of food throughout the course of human history; however, awareness of process-formed compounds, and the potential need to mitigate exposure to those compounds, is a relatively recent phenomenon. In May 2015, the North American Branch of the International Life Sciences Institute (ILSI North America) Technical Committee on Food and Chemical Safety held a workshop on the risk-based process for mitigation of process-formed compounds. This workshop aimed to gain alignment from academia, government, and industry on a risk-based process for proactively assessing the need for and benefit of mitigation of process-formed compounds, including criteria to objectively assess the impact of mitigation as well as research needed to support this process. Workshop participants provided real-time feedback on a draft framework in the form of a decision tree developed by the ILSI North America Technical Committee on Food and Chemical Safety to a panel of experts, and they discussed the importance of communicating the value of such a process to the larger scientific community and, ultimately, the public. The outcome of the workshop was a decision tree that can be used by the scientific community and could form the basis of a global approach to assessing the risks associated with mitigation of process-formed compounds. © The Author(s) 2016.
A Risk-Based Strategy for Evaluating Mitigation Options for Process-Formed Compounds in Food
Brorby, Gregory P.; Krishan, Mansi
2016-01-01
Processing (eg, cooking, grinding, drying) has changed the composition of food throughout the course of human history; however, awareness of process-formed compounds, and the potential need to mitigate exposure to those compounds, is a relatively recent phenomenon. In May 2015, the North American Branch of the International Life Sciences Institute (ILSI North America) Technical Committee on Food and Chemical Safety held a workshop on the risk-based process for mitigation of process-formed compounds. This workshop aimed to gain alignment from academia, government, and industry on a risk-based process for proactively assessing the need for and benefit of mitigation of process-formed compounds, including criteria to objectively assess the impact of mitigation as well as research needed to support this process. Workshop participants provided real-time feedback on a draft framework in the form of a decision tree developed by the ILSI North America Technical Committee on Food and Chemical Safety to a panel of experts, and they discussed the importance of communicating the value of such a process to the larger scientific community and, ultimately, the public. The outcome of the workshop was a decision tree that can be used by the scientific community and could form the basis of a global approach to assessing the risks associated with mitigation of process-formed compounds. PMID:27102178
PREFACE: 13th International Workshop on Slow Positron Beam Techniques and Applications (SLOPOS13)
NASA Astrophysics Data System (ADS)
2014-04-01
These proceedings originate from the 13th International Workshop on Slow Positron Beam Techniques and Applications SLOPOS13 which was held at the campus of the Technische Universität München in Garching between 15th-20th September, 2013. This event is part of a series of triennial SLOPOS conferences. In total 123 delegates from 21 countries participated in the SLOPOS13. The excellent scientific program comprised 50 talks and 58 posters presented during two poster sessions. It was very impressive to learn about novel technical developments on positron beam facilities and the wide range of their applications all over the world. The workshop reflected the large variety of positron beam experiments covering fundamental studies, e.g., for efficient production of anti-hydrogen as well as applied research on defects in bulk materials, thin films, surfaces, and interfaces. The topics comprised: . Positron transport and beam technology . Pulsed beams and positron traps . Defect profiling in bulk and layered structures . Nanostructures, porous materials, thin films . Surfaces and interfaces . Positronium formation and emission . Positron interactions with atoms and molecules . Many positrons and anti-hydrogen . Novel experimental techniques The international advisory committee of SLOPOS awarded student prizes for the best presented scientific contributions to a team of students from Finland, France, and the NEPOMUC team at TUM. The conference was overshadowed by the sudden death of Professor Klaus Schreckenbach immediately before the workshop. In commemoration of him as a spiritus rectus of the neutron induced positron source a minutes' silence was hold. We are most grateful for the hard work of the Local Organising Committee, the help of the International Advisory Committee, and all the students for their friendly and efficient support during the meeting. The workshop could not have occurred without the generous support of the Heinz Maier-Leibnitz Zentrum (MLZ), Deutsche Forschungsgemeinschaft (DFG), and IOP publishing. Finally we would like to thank all attendees for their outstanding scientific contributions to SLOPOS13, and for the fruitful scientific discussions also in informal atmosphere during the social events. We are looking forward to SLOPOS14 in Japan in 2016! Christoph Hugenschmidt and Christian Piochacz (Guest Editors) Garching, March 2014 Further conference and committee information, as well as the conference picture, can be viewed in the pdf.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
The Environmental Engineering Committee conducted a preliminary review of the above document in March 1986, and identified obvious errors or omissions which are explained in detail in its initial report. The Office of Solid Waste asked the Committee to review the final draft ACL guidance when it was ready for publications in the Federal Register. This report represents the Committee's review of the final draft which was found to be well-written and technically sound.
NASA Astrophysics Data System (ADS)
Soares, Christopher
2006-03-01
In 2004 a new work item proposal (NWIP) was accepted by the International Organization for Standardization (ISO) Technical Committee 85 (TC85 -- Nuclear Energy), Subcommittee 2 (Radiation Protection) for the development of a standard for the clinical dosimetry of beta radiation sources used for brachytherapy. To develop this standard, a new Working Group (WG 22 - Ionizing Radiation Dosimetry and Protocols in Medical Applications) was formed. The standard is based on the work of an ad-hoc working group initiated by the Dosimetry task group of the Deutsches Insitiut für Normung (DIN). Initially the work was geared mainly towards the needs of intravascular brachytherapy, but with the decline of this application, more focus has been placed on the challenges of accurate dosimetry for the concave eye plaques used to treat ocular melanoma. Guidance is given for dosimetry formalisms, reference data to be used, calibrations, measurement methods, modeling, uncertainty determinations, treatment planning and reporting, and clinical quality control. The document is currently undergoing review by the ISO member bodies for acceptance as a Committee Draft (CD) with publication of the final standard expected by 2007. There are opportunities for other ISO standards for medical dosimetry within the framework of WG22.
ERIC Educational Resources Information Center
Congress of the U.S., Washington, DC. Senate Committee on Labor and Human Resources.
This transcript reports on a Senate hearing concerning the reauthorization of the Education of the Deaf Act. As well as statements by committee members, the transcript presents statements by and answers to questions of the following: students at Gallaudet University (Washington, DC), students at the National Technical Institute for the Deaf (New…
NASA Technical Reports Server (NTRS)
1921-01-01
The purpose of the Committee in the preparation and publication of this report is to secure uniformity in the official documents of the government and, as far as possible, in technical and other commercial publications. This report supersedes all previous publications of the Committee on this subject.
76 FR 30229 - Shipping Coordinating Committee; Notice of Committee Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-24
.... --Strategy and planning. --Organizational reforms. --Resource management. --Technical Co-operation Fund--biennial allocation to support the ITCP Programme for 2012-2013. --Results-based budget. --Voluntary IMO... FSS Code for communication equipment for fire-fighting teams. --Development of guidelines for use of...
75 FR 45591 - Pipeline Safety: Notice of Technical Pipeline Safety Advisory Committee Meetings
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-03
... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Committee Meetings AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA); DOT. ACTION... safety standards, risk assessments, and safety policies for natural gas pipelines and for hazardous...
The Accreditation Experience of Clinical Laboratories and Blood Banks in Mexico.
Quintana, Sandra
2015-11-01
The accreditation of clinical laboratories and blood banks based on ISO 15189 is now being consolidated in Mexico, and is coordinated by the Mexican accreditation entity innovative strategies, A.C. (ema) and supported by the activities of the committee of clinical laboratories and blood banks. The active participation in working groups formed by the technical committee of clinical laboratories and blood banks in specific areas, has contributed to the formulation of technical documents and criteria of evaluation that strengthen the current accreditation scheme. The national registry of evaluation (PNE) consists of technical experts and evaluators from different disciplines of clinical laboratory; the evaluators actively participate in accreditation assessment, with an ultimate goal to receive training and feedback for continuous improvement of its own performance.
77 FR 64829 - Renewal of the Bureau of Labor Statistics Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-23
... DEPARTMENT OF LABOR Bureau of Labor Statistics Renewal of the Bureau of Labor Statistics Technical... of Labor has determined that the renewal of the Bureau of Labor Statistics Technical Advisory... upon the Commissioner of Labor Statistics by 29 U.S.C. 1 and 2. This determination follows consultation...
NASA Astrophysics Data System (ADS)
Hanson, R. T.; Rivera, A.; Tujchneider, O.; Guillén, C.; Campos, M.; Da Franca, N.; May, Z.; Aureli, A.
2015-12-01
The UNESCO-IHP ISARM-Americas technical committee has developed a regional strategy for the assessment and management of transboundary aquifer systems in the Americas as part of their ongoing cooperative assistance to help neighboring countries sustain water resources and reduce potential conflict. The fourth book in the series of publications sponsored by UNESCO and OAS documents this strategy. The goal of this strategy is the collective understanding, developing, managing, and protecting of the transboundary aquifers in the Americas This strategy includes technical, social, and governance recommendations for an integrated resource management of groundwater based on flexible arrangements that not only manage but also demand social participation in solving problems, consider changes in land use and water use and promote the increase of water sustainability for all transboundary neighbors. The successful implementation of this strategy starts with sharing information of the status and use of land and water as well as intergovernmental partnerships to link science and policy with existing instruments for managing the water resources. International organizations such as UNESCO and OAS also can help facilitate the development of transboundary agreements and establish cooperation on transboundary aquifers between neighbors. The UNESCO-IHP ISARM-Americas technical committee has been successful in creating a network of partners from 24 countries and in translating existing aquifer knowledge into a meaningful strategy for the American hemisphere. The strategy aims to explain and develop the role of science and the informed-decision approach. Examples from North and South America show how the process has begun to develop for selected transboundary aquifers. These include the Milk River basin between the US and Canada, the Rio Grande and Colorado River basins between the US and Mexico, and the Guarani River basin in South America.
11 CFR 9033.12 - Production of computerized information.
Code of Federal Regulations, 2012 CFR
2012-01-01
... conform to the technical specifications, including file requirements, described in the Federal Election Commission's Computerized Magnetic Media Requirements for title 26 Candidates/Committees Receiving Federal... outstanding campaign obligations. (b) Organization of computerized information and technical specifications...
11 CFR 9033.12 - Production of computerized information.
Code of Federal Regulations, 2014 CFR
2014-01-01
... conform to the technical specifications, including file requirements, described in the Federal Election Commission's Computerized Magnetic Media Requirements for title 26 Candidates/Committees Receiving Federal... outstanding campaign obligations. (b) Organization of computerized information and technical specifications...
11 CFR 9033.12 - Production of computerized information.
Code of Federal Regulations, 2013 CFR
2013-01-01
... conform to the technical specifications, including file requirements, described in the Federal Election Commission's Computerized Magnetic Media Requirements for title 26 Candidates/Committees Receiving Federal... outstanding campaign obligations. (b) Organization of computerized information and technical specifications...
[ISO 15189 medical laboratory accreditation].
Aoyagi, Tsutomu
2004-10-01
This International Standard, based upon ISO/IEC 17025 and ISO 9001, provides requirements for competence and quality that are particular to medical laboratories. While this International Standard is intended for use throughout the currently recognized disciplines of medical laboratory services, those working in other services and disciplines will also find it useful and appropriate. In addition, bodies engaged in the recognition of the competence of medical laboratories will be able to use this International Standard as the basis for their activities. The Japan Accreditation Board for Conformity Assessment (AB) and the Japanese Committee for Clinical Laboratory Standards (CCLS) are jointly developing the program of accreditation of medical laboratories. ISO 15189 requirements consist of two parts, one is management requirements and the other is technical requirements. The former includes the requirements of all parts of ISO 9001, moreover it includes the requirement of conformity assessment body, for example, impartiality and independence from any other party. The latter includes the requirements of laboratory competence (e.g. personnel, facility, instrument, and examination methods), moreover it requires that laboratories shall participate proficiency testing(s) and laboratories' examination results shall have traceability of measurements and implement uncertainty of measurement. Implementation of ISO 15189 will result in a significant improvement in medical laboratories management system and their technical competence. The accreditation of medical laboratory will improve medical laboratory service and be useful for patients.
The international development of forensic science standards - A review.
Wilson-Wilde, Linzi
2018-04-16
Standards establish specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform as intended. Standards can be used in the accreditation of forensic laboratories or facilities and in the certification of products and services. In recent years there have been various international activities aiming at developing forensic science standards and guidelines. The most significant initiative currently underway within the global forensic community is the development of International Organization for Standardization (ISO) standards. This paper reviews the main bodies working on standards for forensic science, the processes used and the implications for accreditation. This paper specifically discusses the work of ISO Technical Committee TC272, the future TC272 work program for the development of forensic science standards and associated timelines. Also discussed, are the lessons learnt to date in navigating the complex environment of multi-country stakeholder deliberations in standards development. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.
77 FR 47490 - Shipping Coordinating Committee; Notice of Committee Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-08
...): --Review and modernization of the GMDSS --Further development of the GMDSS master plan on shore-based facilities --Consideration of operational and technical coordination provisions of maritime safety... search and rescue procedures, including SAR training matters --Further development of the Global SAR Plan...
77 FR 72431 - Shipping Coordinating Committee; Notice of Committee Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-05
... GMDSS --Further development of the GMDSS master plan on shore-based facilities --Consideration of operational and technical coordination provisions of maritime safety information (MSI) services, including the... matters --Further development of the Global SAR Plan for the provision of maritime --SAR services...
PREFACE: 2nd International Conference on Innovative Materials, Structures and Technologies
NASA Astrophysics Data System (ADS)
Ručevskis, Sandris
2015-11-01
The 2nd International Conference on Innovative Materials, Structures and Technologies (IMST 2015) took place in Riga, Latvia from 30th September - 2nd October, 2015. The first event of the conference series, dedicated to the 150th anniversary of the Faculty of Civil Engineering of Riga Technical University, was held in 2013. Following the established tradition, the aim of the conference was to promote and discuss the latest results of industrial and academic research carried out in the following engineering fields: analysis and design of advanced structures and buildings; innovative, ecological and energy efficient building materials; maintenance, inspection and monitoring methods; construction technologies; structural management; sustainable and safe transport infrastructure; and geomatics and geotechnics. The conference provided an excellent opportunity for leading researchers, representatives of the industrial community, engineers, managers and students to share the latest achievements, discuss recent advances and highlight the current challenges. IMST 2015 attracted over 120 scientists from 24 countries. After rigorous reviewing, over 80 technical papers were accepted for publication in the conference proceedings. On behalf of the organizing committee I would like to thank all the speakers, authors, session chairs and reviewers for their efficient and timely effort. The 2nd International Conference on Innovative Materials, Structures and Technologies was organized by the Faculty of Civil Engineering of Riga Technical University with the support of the Latvia State Research Programme under the grant agreement "INNOVATIVE MATERIALS AND SMART TECHNOLOGIES FOR ENVIRONMENTAL SAFETY, IMATEH". I would like to express sincere gratitude to Juris Smirnovs, Dean of the Faculty of Civil Engineering, and Andris Chate, manager of the Latvia State Research Programme. Finally, I would like to thank all those who helped to make this event happen. Special thanks go to Diana Bajare, Laura Sele, Liga Radina and Jana Galilejeva for their major contribution to organizing the conference and to the literary editor Tatjana Smirnova and technical editor Daira Erdmane for their hard work on the conference proceedings.
77 FR 47491 - Shipping Coordinating Committee; Notice of Committee Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-08
... Session of the International Maritime Organization's (IMO) Sub-Committee on Dangerous Goods, Solid Cargoes and Containers (DSC 17) to be held at the IMO Headquarters, United Kingdom, September 17-21. The... to the International Maritime Solid Bulk Cargoes (IMSBC) Code and supplements --Amendments to SOLAS...
PREFACE: International Conference on Computing in High Energy and Nuclear Physics (CHEP 2012)
NASA Astrophysics Data System (ADS)
Ernst, Michael; Düllmann, Dirk; Rind, Ofer; Wong, Tony
2012-12-01
The International Conference on Computing in High Energy and Nuclear Physics (CHEP) was held at New York University on 21- 25 May 2012. CHEP is a major series of international conferences for physicists and computing professionals from the High Energy and Nuclear Physics community and related scientific and technical fields. The CHEP conference provides a forum to exchange information on computing progress and needs for the community, and to review recent, ongoing and future activities. CHEP conferences are held at roughly 18-month intervals, alternating between Europe, Asia, the Americas and other parts of the world. Recent CHEP conferences have been held in Taipei, Taiwan (2010); Prague, Czech Republic (2009); Victoria, Canada (2007); Mumbai, India (2006); Interlaken, Switzerland (2004); San Diego, United States (2003); Beijing, China (2001); Padova, Italy (2000). CHEP 2012 was organized by Brookhaven National Laboratory (BNL) and co-sponsored by New York University. The organizational structure for CHEP consists of an International Advisory Committee (IAC) which sets the overall themes of the conference, a Program Organizing Committee (POC) that oversees the program content, and a Local Organizing Committee (LOC) that is responsible for local arrangements (lodging, transportation and social events) and conference logistics (registration, program scheduling, conference site selection and conference proceedings). There were over 500 attendees with a program that included plenary sessions of invited speakers, a number of parallel sessions comprising around 125 oral and 425 poster presentations and industrial exhibitions. We thank all the presenters for the excellent scientific content of their contributions to the conference. Conference tracks covered topics on Online Computing, Event Processing, Distributed Processing and Analysis on Grids and Clouds, Computer Facilities, Production Grids and Networking, Software Engineering, Data Stores and Databases and Collaborative Tools. We would like to thank Brookhaven Science Associates, New York University, Blue Nest Events, the International Advisory Committee, the Program Committee and the Local Organizing Committee members for all their support and assistance. We also would like to acknowledge the support provided by the following sponsors: ACEOLE, Data Direct Networks, Dell, the European Middleware Initiative and Nexsan. Special thanks to the Program Committee members for their careful choice of conference contributions and enormous effort in reviewing and editing the conference proceedings. The next CHEP conference will be held in Amsterdam, the Netherlands on 14-18 October 2013. Conference Chair Michael Ernst (BNL) Program Committee Daniele Bonacorsi, University of Bologna, Italy Simone Campana, CERN, Switzerland Philippe Canal, Fermilab, United States Sylvain Chapeland, CERN, Switzerland Dirk Düllmann, CERN, Switzerland Johannes Elmsheuser, Ludwig Maximilian University of Munich, Germany Maria Girone, CERN, Switzerland Steven Goldfarb, University of Michigan, United States Oliver Gutsche, Fermilab, United States Benedikt Hegner, CERN, Switzerland Andreas Heiss, Karlsruhe Institute of Technology, Germany Peter Hristov, CERN, Switzerland Tony Johnson, SLAC, United States David Lange, LLNL, United States Adam Lyon, Fermilab, United States Remigius Mommsen, Fermilab, United States Axel Naumann, CERN, Switzerland Niko Neufeld, CERN, Switzerland Rolf Seuster, TRIUMF, Canada Local Organizing Committee Maureen Anderson, John De Stefano, Mariette Faulkner, Ognian Novakov, Ofer Rind, Tony Wong (BNL) Kyle Cranmer (NYU) International Advisory Committee Mohammad Al-Turany, GSI, Germany Lothar Bauerdick, Fermilab, United States Ian Bird, CERN, Switzerland Dominique Boutigny, IN2P3, France Federico Carminati, CERN, Switzerland Marco Cattaneo, CERN, Switzerland Gang Chen, Institute of High Energy Physics, China Peter Clarke, University of Edinburgh, United Kingdom Sridhara Dasu, University of Wisconsin-Madison, United States Günter Duckeck, Ludwig Maximilian University of Munich, Germany Richard Dubois, SLAC, United States Michael Ernst, BNL, United States Ian Fisk, Fermilab, United States Gonzalo Merino, PIC, Spain John Gordon, STFC-RAL, United Kingdom Volker Gülzow, DESY, Germany Frederic Hemmer, CERN, Switzerland Viatcheslav Ilyin, Moscow State University, Russia Nobuhiko Katayama, KEK, Japan Alexei Klimentov, BNL, United States Simon C. Lin, Academia Sinica, Taiwan Milos Lokajícek, FZU Prague, Czech Republic David Malon, ANL, United States Pere Mato Vila, CERN, Switzerland Mauro Morandin, INFN CNAF, Italy Harvey Newman, Caltech, United States Farid Ould-Saada, University of Oslo, Norway Ruth Pordes, Fermilab, United States Hiroshi Sakamoto, University of Tokyo, Japan Alberto Santoro, UERJ, Brazil Jim Shank, Boston University, United States Dongchul Son, Kyungpook National University, South Korea Reda Tafirout, TRIUMF, Canada Stephen Wolbers, Fermilab, United States Frank Wuerthwein, UCSD, United States
ERIC Educational Resources Information Center
International Telecommunication Union, Geneva (Switzerland).
Reports are presented on the 1970-71 activities of the General Secretariat of the International Telecommunication Union, the International Frequency Registration Board, the International Radio Consultative Committee, and the International Telegraph and Telephone Consultative Committee. In addition progress in the field of space communications made…
76 FR 55124 - Audit Committee Meeting of the Board of Directors; Sunshine Act
Federal Register 2010, 2011, 2012, 2013, 2014
2011-09-06
... NEIGHBORHOOD REINVESTMENT CORPORATION Audit Committee Meeting of the Board of Directors; Sunshine... Internal Audit Director III. Internal Audit Report with Management's Response IV. FY `11 and `12 Risk Assessments and Internal Audit Plans V. Internal Audit Resource Capacity Proposal VI. Communication of...
ISODEX: An entry point for developing countries into space activities
NASA Astrophysics Data System (ADS)
Skinner, Mark Andrew
2015-08-01
Several threads current in the community of international space actors have led to calls at UN COPUOS Scientific & Technical Sub-Committee meetings for enhancing the scientific information available on man-made space objects, whilst fostering international space object data sharing. Growing awareness of the problems of space debris proliferation and space traffic management, especially amongst developing countries and non-traditional space faring nations, have fueled their desires to become involved in the areas of space object tracking, utilizing relatively modest astronomical instrumentation. Additionally, several commercial satellite operators, members of the Satellite Data Association, have called for augmentation of the information available from existing catalogs. This confluence of factors has led to an international discussion, at the UN and elsewhere, of the possibility of creating a clearing-house for parties willing to share data on space objects, with a working title of the “International Space Object Data Exchange” (ISODEX). We discuss the ideas behind this concept, how it might be implemented, and it might enhance the public’s knowledge of space activities, as well as providing an entry point into space for developing countries.
ERIC Educational Resources Information Center
Stalmeijer, Renée; Whittingham, Jill; de Grave, Willem; Dolmans, Diana
2016-01-01
Student evaluation committees play a crucial role in internal quality assurance processes as representatives of the student body. However, the students on these committees sometimes experience difficulty in providing constructive and structured feedback to faculty in an environment characterised by a strong power differential between student and…
77 FR 56238 - Audit Committee Meeting of the Board of Directors; Sunshine Act
Federal Register 2010, 2011, 2012, 2013, 2014
2012-09-12
... NEIGHBORHOOD REINVESTMENT CORPORATION Audit Committee Meeting of the Board of Directors; Sunshine... Secretary, (202) 220-2376; [email protected] . AGENDA: I. Call to Order II. Executive Session with Internal Audit... to the Audit Committee Charter VI. Internal Audit Response with Management's Response VII. FY 2013...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-13
...] Preparation for International Conference on Harmonisation Steering Committee and Expert Working Group Meetings... entitled ``Preparation for ICH Steering Committee and Expert Working Group Meetings in Tallinn, Estonia... by April 30, 2010. Interested persons may present data, information, or views orally or in writing...
76 FR 22091 - Biomass Research and Development Technical Advisory Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-20
... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development...: Notice of Open Meeting. SUMMARY: This notice announces an open meeting of the Biomass Research and...: Purpose of Committee: To provide advice and guidance that promotes research and development leading to the...
Hwang, Joo Ha; Rulyak, Stephen D; Kimmey, Michael B
2006-06-01
This literature review and the recommendations therein were prepared for the American Gastroenterological Association Institute Clinical Practice and Economics Committee. The paper was approved by the Committee on January 19, 2006, and by the AGA Institute Governing Board on April 20, 2006.
West Valley College Vocational and Technical Advisory Committees.
ERIC Educational Resources Information Center
West Valley Coll., Saratoga, CA.
This brochure describes junior college advisory committees as groups of persons who represent industry and assist in organizing curriculum, advise on material procurement, keep the college current on industry practices, coordinate programs with the community, assist in student selection, guide instructors, provide moral support and public…
Federal Register 2010, 2011, 2012, 2013, 2014
2013-08-21
... FEDERAL COMMUNICATIONS COMMISSION [IB Docket No. 04-286; DA 13-1747] Fourth Meeting of the Advisory Committee for the 2015 World Radiocommunication Conference AGENCY: Federal Communications..., technical support and recommendations relating to the preparation for the 2015 World Radiocommunication...
Ensuring Quality in AFRINEST and SATT
2013-01-01
Background: Three randomized open-label clinical trials [Simplified Antibiotic Therapy Trial (SATT) Bangladesh, SATT Pakistan and African Neonatal Sepsis Trial (AFRINEST)] were developed to test the equivalence of simplified antibiotic regimens compared with the standard regimen of 7 days of parenteral antibiotics. These trials were originally conceived and designed separately; subsequently, significant efforts were made to develop and implement a common protocol and approach. Previous articles in this supplement briefly describe the specific quality control methods used in the individual trials; this article presents additional information about the systematic approaches used to minimize threats to validity and ensure quality across the trials. Methods: A critical component of quality control for AFRINEST and SATT was striving to eliminate variation in clinical assessments and decisions regarding eligibility, enrollment and treatment outcomes. Ensuring appropriate and consistent clinical judgment was accomplished through standardized approaches applied across the trials, including training, assessment of clinical skills and refresher training. Standardized monitoring procedures were also applied across the trials, including routine (day-to-day) internal monitoring of performance and adherence to protocols, systematic external monitoring by funding agencies and external monitoring by experienced, independent trial monitors. A group of independent experts (Technical Steering Committee/Technical Advisory Group) provided regular monitoring and technical oversight for the trials. Conclusions: Harmonization of AFRINEST and SATT have helped to ensure consistency and quality of implementation, both internally and across the trials as a whole, thereby minimizing potential threats to the validity of the trials’ results. PMID:23945575
77 FR 19056 - Information Reporting Program Advisory Committee (IRPAC); Nominations
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-29
... DEPARTMENT OF TREASURY Internal Revenue Service Information Reporting Program Advisory Committee (IRPAC); Nominations AGENCY: Internal Revenue Service, Department of Treasury. ACTION: Request for Nominations. SUMMARY: The Internal Revenue Service (IRS) requests nominations of individuals for selection to...
78 FR 19582 - Information Reporting Program Advisory Committee (IRPAC); Nominations
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-01
... DEPARTMENT OF TREASURY Internal Revenue Service Information Reporting Program Advisory Committee (IRPAC); Nominations AGENCY: Internal Revenue Service, Department of Treasury. ACTION: Request for Nominations. SUMMARY: The Internal Revenue Service (IRS) requests nominations of individuals for selection to...
75 FR 27557 - Federal Advisory Committee Act
Federal Register 2010, 2011, 2012, 2013, 2014
2010-05-17
... the charter for the Advisory Committee for the 2012 Radiocommunication Conference (WRC-12 Advisory Committee), for a two-year period. The WRC-12 Advisory Committee is a Federal advisory committee under the... CONTACT: Alexander Roytblat, Designated Federal Official, WRC-12 Advisory Committee, FCC International...
NASA's UAS [Unmanned Aircraft Systems] Related Activities
NASA Technical Reports Server (NTRS)
Bauer, Jeffrey
2012-01-01
NASA continues to operate all sizes of UAS in all classes of airspace both domestically and internationally. Missions range from highly complex operations in coordination with piloted aircraft, ground, and space systems in support of science objectives to single aircraft operations in support of aeronautics research. One such example is a scaled commercial transport aircraft being used to study recovery techniques due to large upsets. NASA's efforts to support routine UAS operations continued on several fronts last year. At the national level in the United States (U.S.), NASA continued its support of the UAS Executive Committee (ExCom) comprised of the Federal Aviation Administration (FAA), Department of Defense (DoD), Department of Homeland Security (DHS), and NASA. The committee was formed in recognition of the need of UAS operated by these agencies to access to the National Airspace System (NAS) to support operational, training, development and research requirements. Recommendations were received on how to operate both manned and unmanned aircraft in class D airspace and plans are being developed to validate and implement those recommendations. In addition the UAS ExCom has begun developing recommendations for how to achieve routine operations in remote areas as well as for small UAS operations in class G airspace. As well as supporting the UAS ExCom, NASA is a participant in the recently formed Aviation Rule Making Committee for UAS. This committee, established by the FAA, is intended to propose regulatory guidance which would enable routine civil UAS operations. As that effort matures NASA stands ready to supply the necessary technical expertise to help that committee achieve its objectives. By supporting both the UAS ExCom and UAS ARC, NASA is positioned to provide its technical expertise across the full spectrum of UAS airspace access related topic areas. The UAS NAS Access Project got underway this past year under the leadership of NASA s Aeronautics Research Mission Directorate. This project is focused on advancing the state of the art and providing research and analysis results in the areas of Separation Assurance, Communications (non-governmental spectrum allocation for UAS), Certification, and Human System Integration (ground control station design/pilot interfaces). The project is working in close coordination with the FAA and industry standards organizations (e.g. RTCA SC 203). More details on this project are provided in a separate article in this year's yearbook
Do we need sustainability as a new approach in human factors and ergonomics?
Zink, Klaus J; Fischer, Klaus
2013-01-01
The International Ergonomics Association Technical Committee 'Human Factors and Sustainable Development' was established to contribute to a broad discourse about opportunities and risks resulting from current societal 'mega-trends' and their impacts on the interactions among humans and other elements of a system, e.g. in work systems. This paper focuses on the underlying key issues: how do the sustainability paradigm and human factors/ergonomics interplay and interact, and is sustainability necessary as a new approach for our discipline? Based on a discussion of the sustainability concept, some general principles for designing new and enhancing existent approaches of human factors and ergonomics regarding their orientation towards sustainability are proposed. The increasing profile of sustainability on the international stage presents new opportunities for human factors/ergonomics. Positioning of the sustainability paradigm within human factors/ergonomics is discussed. Approaches to incorporating sustainability in the design of work systems are considered.
PREFACE: 7th International Conference on Quantum Theory and Symmetries (QTS7)
NASA Astrophysics Data System (ADS)
Burdík, Čestmír; Navrátil, Ondřej; Pošta, Severin; Schnabl, Martin; Šnobl, Libor
2012-02-01
The Seventh International Conference Quantum Theory and Symmetries (QTS7), organized by the Departments of Mathematics and Physics, Faculty of Nuclear Sciences and Physical Engineering at the Czech Technical University in Prague, the Bogoliubov Laboratory of Theoretical Physics of the Joint Institute for Nuclear Research and the Institute of Physics at the Academy of Sciences of the Czech Republic, belongs to a successful series of conferences which began at Goslar, Germany in 1999. More recent QTS conferences were held in Poland, Bulgaria, USA and Spain. QTS7 gathered around 300 scientists from all over the world. 136 of the plenary lectures and contributions presented at QTS7 are published in this issue of Journal of Physics: Conference Series. We acknowledge support from the Commission for co-operation with JINR Dubna and grant LA-08002 from the Ministry of Education of the Czech Republic. Čestmír Burdík Chairman Local Organizing Committee
Mangum, B. W.
1990-01-01
This article summarizes the results of the 17th Session of the Consultative Committee on Thermometry of the International Committee of Weights and Measures (Comité Consultatif de Thermométrie of the Comité International des Poids et Mesures) that met in Sèvres, France, September 12–14, 1989. That session was devoted exclusively to the completion of the International Temperature Scale of 1990, described herein, and to the implications of its adoption. PMID:28179758
76 FR 71011 - Reliability Technical Conference Agenda
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-16
... Reliability Technical Conference. Docket No. AD12-1-000 North American Electric Docket No. RC11-6-000... Chief Executive Officer, North American Electric Reliability Corporation (NERC) Kevin Burke, Chairman... and Reliability, American Public Power Association (APPA); NERC Standards Committee Chairman Deborah...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-25
..., WG-1, Wake Vortex, ARINC Room. RTCA--All Day, WG-4, Application Technical Requirements, Colson Board... Vortex, MacIntosh-NBAA Room & Hilton-ATA Room. RTCA--All Day, WG-4, Application Technical Requirements...
PREFACE: XVIII International Youth Scientific School "Coherent Optics and Optical Spectroscopy"
NASA Astrophysics Data System (ADS)
Salakhov, M. Kh; Samartsev, V. V.; Gainutdinov, R. Kh
2015-05-01
Kazan Federal University has held the annual International Youth School "Coherent Optics and Optical Spectroscopy" since 1997. The choice of the topic is not accidental. Kazan is the home of photon echo which was predicted at Kazan Physical-Technical Institute in 1963 by Prof. U.G. Kopvil'em and V.R. Nagibarov and observed in Columbia University by N.A. Kurnit, I.D. Abella, and S.R. Hartmann in 1964. Since then, photon echo has become a powerful tool of coherent optical spectroscopy and optical information processing, which have been developed here in Kazan in close collaboration between Kazan Physical-Technical Institute and Kazan Federal University. The main subjects of the XVIII International Youth School are: Nonlinear and coherent optics; Atomic and molecular spectroscopy; Coherent laser spectroscopy; Problems of quantum optics; Quantum theory of radiation; and Nanophotonics and Scanning Probe Microscopy. The unchallenged organizers of that school are Kazan Federal University and Kazan E.K. Zavoisky Physical-Technical Institute. The rector of the School is Professor Myakzyum Salakhov, and the vice-rector is Professor Vitaly Samartsev. The International Youth Scientific School "Coherent Optics and Optical Spectroscopy" follows the global pattern of comprehensive studies of matter properties and their interaction with electromagnetic fields. Since 1997 more than 100 famous scientists from the USA, Germany, Ukraine, Belarus and Russia have given plenary lecture presentations. Here over 1000 young scientists had an opportunity to participate in lively discussions about the latest scientific news. Many young people have submitted interesting reports on photonics, quantum electronics, laser physics, quantum optics, traditional optical and laser spectroscopy, non-linear optics, material science and nanotechnology. Here we are publishing the fullsize papers prepared from the most interesting lectures and reports selected by the Program Committee of the School. The International Youth Scientific School "Coherent Optics and Optical Spectroscopy" was greatly supported by The Optical Society of America, the Russian Foundation for Basic Research, the non-profit Dynasty Foundation, the Tatarstan Academy of Science, and the Ministry of Education and Science of the Russian Federation. It is a pleasure to thank the sponsors and all the participants and contributors who made the International School meeting possible and interesting.
The Accreditation Experience of Clinical Laboratories and Blood Banks in Mexico
2015-01-01
The accreditation of clinical laboratories and blood banks based on ISO 15189 is now being consolidated in Mexico, and is coordinated by the Mexican accreditation entity innovative strategies, A.C. (ema) and supported by the activities of the committee of clinical laboratories and blood banks. The active participation in working groups formed by the technical committee of clinical laboratories and blood banks in specific areas, has contributed to the formulation of technical documents and criteria of evaluation that strengthen the current accreditation scheme. The national registry of evaluation (PNE) consists of technical experts and evaluators from different disciplines of clinical laboratory; the evaluators actively participate in accreditation assessment, with an ultimate goal to receive training and feedback for continuous improvement of its own performance. PMID:27683498
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
This collection of papers is a companion volume to A National Program for Energy-Efficient Mortgages and Home Energy Rating Systems: A Blueprint for Action (NREL/TP-261-4677). The Blueprint reports the findings and recommendations of the National Collaborative on Home Energy Rating Systems and Mortgage Incentives for Energy Efficiency about a voluntary national program linking energy-efficient mortgages and home energy rating systems. This volume provides technical documentation for A Blueprint for Action. It consists of 55 technical issue papers and 13 special papers prepared by the technical advisory committees and some members of the Collaborative Consensus Committee of the National Collaborative. Itmore » also contains the bibliography and the glossary written by the members and staff of the National Collaborative.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Blair, N.; Dobos, S.; Janzou, S.
2013-08-01
The System Advisor Model (SAM) is a broad and robust set of models and frameworks for analyzing both system performance and system financing. It does this across a range of technologies dominated by solar technologies including photovoltaics (PV) and concentrated solar power (CSP). The U.S. Department of Energy (DOE) Solar Energy Technology Program requested the SAM development team to review the photovoltaic performance modeling with the development community and specifically, with the independent engineering community. The report summarizes the major effort for this technical review committee (TRC).
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lavietes, Anthony; Trebes, James; Borchers, Robert
2013-01-01
At the request of the Domestic Nuclear Detection Office (DNDO), a Review Committee comprised of representatives from the American Physical Society (APS) Panel on Public Affairs (POPA) and the Institute of Electrical and Electronics Engineers (IEEE) Nuclear and Plasma Sciences Society (NPSS) performed a technical review of the DNDO Transformational and Applied Research Directorate (TARD) research and development program. TARD’s principal objective is to address gaps in the Global Nuclear Detection Architecture (GNDA) through improvements in the performance, cost, and operational burden of detectors and systems. The charge to the Review Committee was to investigate the existing TARD research andmore » development plan and portfolio, recommend changes to the existing plan, and recommend possible new R&D areas and opportunities. The Review Committee has several recommendations.« less
78 FR 63963 - Environmental Technologies Trade Advisory Committee Public Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-10-25
... DEPARTMENT OF COMMERCE International Trade Administration Environmental Technologies Trade Advisory Committee Public Meeting AGENCY: International Trade Administration, DOC. ACTION: Notice of... [[Page 63964
77 FR 2765 - NASA International Space Station Advisory Committee; Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-19
... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (12-003)] NASA International Space Station Advisory Committee; Meeting AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of..., the National Aeronautics and Space Administration announces an open meeting of the NASA International...
78 FR 77502 - NASA International Space Station Advisory Committee; Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-23
... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (13-154)] NASA International Space Station Advisory Committee; Meeting AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of..., the National Aeronautics and Space Administration announces a meeting of the NASA International Space...
77 FR 41203 - NASA International Space Station Advisory Committee; Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-12
... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-057] NASA International Space Station Advisory Committee; Meeting AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of..., the National Aeronautics and Space Administration announces an open meeting of the NASA International...
77 FR 66082 - NASA International Space Station Advisory Committee; Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-01
... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-090] NASA International Space Station Advisory Committee; Meeting AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of..., the National Aeronautics and Space Administration announces an open meeting of the NASA International...
75 FR 51852 - NASA International Space Station Advisory Committee; Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-23
... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-090)] NASA International Space Station Advisory Committee; Meeting AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of..., the National Aeronautics and Space Administration announces an open meeting of the NASA International...
78 FR 49296 - NASA International Space Station Advisory Committee; Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-08-13
... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 13-091] NASA International Space Station Advisory Committee; Meeting AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of..., the National Aeronautics and Space Administration announces a meeting of the NASA International Space...
78 FR 66964 - International Space Station National Laboratory Advisory Committee; Charter Renewal
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-07
... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: (13-129)] International Space Station National Laboratory Advisory Committee; Charter Renewal AGENCY: National Aeronautics and Space Administration (NASA). ACTION: Notice of renewal of the charter of the International Space Station National...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-24
... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-104)] International Space Station (ISS) National Laboratory Advisory Committee; Charter Renewal AGENCY: National Aeronautics and Space... International and Interagency Relations, (202) 358-0550, National Aeronautics and Space Administration...
77 FR 28655 - Meeting of Advisory Committee on International Communications and Information Policy
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-15
... information and communications services, providers of such services, technology research and development... the information and communications technology (ICT) aspects of international disaster response; recent... Communications and Information Policy The Department of State's Advisory Committee on International...
Advanced Concepts in Structuring and Utilizing Local Advisory Councils and Craft Committees.
ERIC Educational Resources Information Center
Carroll, Richard E.
Adoption and implementation of advanced concepts in structuring and using a local advisory council and craft committees can result in significantly improved vocational education programs. The organizational structure of a vocational-technical school advisory council should be a vehicle that facilitates accomplishment of its prime function--to…
76 FR 323 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-04
...), Building 33, Cloud Room, 53560 Hull Street, San Diego, California 92152. The Committee advises the Office... and Relation to Category 3 5. Godson Microprocessor Project 6. Autonomous Vehicle Project 7. Cloud Computing, Technology and Security Issues Thursday, January 27 Closed Session 8. Discussion of matters...
78 FR 5860 - Eighth Meeting: RTCA Next Gen Advisory Committee (NAC)
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-28
...] Preliminary report to identify and mitigate barriers to implementing PBN. Issues associated with Implementing RNAV/RNP [cir] An open discussion by the Committee of Non-technical barriers of PBN procedures... NextGen. Cat Ex 2 Task Group [cir] Preliminary report on the recommendation for implementing new...
77 FR 38680 - NASA Advisory Council; Human Exploration and Operations Committee; Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-28
... persons, scientific and technical information relevant to program planning. DATES: Monday, July 23, 2012... Goddard Space Flight Center (GSFC), Building 1, Room E100D, 8800 Greenbelt Road, Greenbelt, MD 20771. FOR... Session with the NAC Science Committee on Mars Program Planning Group and Joint Robotic Precursor...
ERIC Educational Resources Information Center
Lund, Duane R.
1977-01-01
Describes the case of Staples, Minnesota, where the vocational-technical school bought a 300-acre farm and with the help of a strong advisory committee was instrumental in changing the farming practices in an eight-county area. Emphasis is on the role and activities of the advisory committee; eleven specific contributions are listed. (HD)
Report of the Technical Committee for Hospitality, Tourism, Recreation.
ERIC Educational Resources Information Center
Oregon State Dept. of Education, Salem. Div. of Vocational Education.
This color-coded committee report identifies the skills and knowledge required by employees in the hospitality/tourism/recreation occupational area. The reports of four subcommittees focused on food/beverage, hotel/motel, recreation/leisure, and travel/tourism skills are also included. Introductory materials include a general statement of the…
78 FR 30267 - Notice of June 12 Advisory Committee on Voluntary Foreign Aid Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-22
... AGENCY FOR INTERNATIONAL DEVELOPMENT Notice of June 12 Advisory Committee on Voluntary Foreign Aid Meeting AGENCY: United States Agency for International Development. ACTION: Notice of meeting. SUMMARY... Committee on Voluntary Foreign Aid (ACVFA). Date: Wednesday, June 12, 2013. Time: 2:30 p.m. to 4:00 p.m...
77 FR 47165 - Open Meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-07
... Toll-Free Project Committee AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of meeting. SUMMARY: An open meeting of the Taxpayer Advocacy Panel Toll-Free Project Committee will be conducted. The... at the Internal Revenue Service. DATES: The meeting will be held Tuesday, September 4, 2012. FOR...
NASA Technical Reports Server (NTRS)
Kennedy, John M.; Pinelli, Thomas E.; Hecht, Laura F.; Barclay, Rebecca O.
1994-01-01
The U.S. aerospace industry has a long history of federal support for research related to its needs. Since the establishment of the National Advisory Committee for Aeronautics (NACA) in 1915, the federal government has provided continuous research support related to flight and aircraft design. This research has contributed to the international preeminence of the U.S. aerospace industry. In this paper, we present a sociological analysis of aerospace engineers and scientists and how their attitudes and behaviors impact the flow of scientific and technical information (STI). We use a constructivist framework to explain the spotty dissemination of federally funded aerospace research. Our research is aimed towards providing federal policymakers with a clearer understanding of how and when federally funded aerospace research is used. This understanding will help policymakers design improved information transfer systems that will aid the competitiveness of the U.S. aerospace industry.
FMEA: a model for reducing medical errors.
Chiozza, Maria Laura; Ponzetti, Clemente
2009-06-01
Patient safety is a management issue, in view of the fact that clinical risk management has become an important part of hospital management. Failure Mode and Effect Analysis (FMEA) is a proactive technique for error detection and reduction, firstly introduced within the aerospace industry in the 1960s. Early applications in the health care industry dating back to the 1990s included critical systems in the development and manufacture of drugs and in the prevention of medication errors in hospitals. In 2008, the Technical Committee of the International Organization for Standardization (ISO), licensed a technical specification for medical laboratories suggesting FMEA as a method for prospective risk analysis of high-risk processes. Here we describe the main steps of the FMEA process and review data available on the application of this technique to laboratory medicine. A significant reduction of the risk priority number (RPN) was obtained when applying FMEA to blood cross-matching, to clinical chemistry analytes, as well as to point-of-care testing (POCT).
22 CFR 214.32 - Calling of advisory committee meetings.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Calling of advisory committee meetings. 214.32 Section 214.32 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADVISORY COMMITTEE MANAGEMENT Operation of Advisory Committees § 214.32 Calling of advisory committee meetings. (a) No advisory committee...
NASA Astrophysics Data System (ADS)
Ghodssi, Reza; Livermore, Carol; Arnold, David
2010-10-01
This special section of the Journal of Micromechanics and Microengineering presents papers selected from the 9th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2009), which was held in Washington DC, USA from 1-4 December 2009. Since it was first held in Sendai, Japan in 2000, the PowerMEMS workshop has focused on small-scale systems that process, convert, or generate macroscopically significant amounts of power, typically with high power density or high energy density. In the workshop's early years, much of the research presented was on small-scale fueled systems, such as micro heat engines and micro fuel cells. The past nine years have seen a dramatic expansion in the range of technologies that are brought to bear on the challenge of high-power, small-scale systems, as well as an increase in the applications for such technologies. At this year's workshop, 158 contributed papers were presented, along with invited and plenary presentations. The papers focused on applications from micro heat engines and fuel cells, to energy harvesting and its enabling electronics, to thermal management and propulsion. Also presented were the technologies that enable these applications, such as the structuring of microscale, nanoscale and biological systems for power applications, as well as combustion and catalysis at small scales. This special section includes a selection of 12 expanded papers representing energy harvesting, chemical and fueled systems, and elastic energy storage at small scales. We would like to express our appreciation to the members of the International Steering Committee, the Technical Program Committee, the Local Organizing Committee, and to the workshop's financial supporters. We are grateful to the referees for their contributions to the review process. Finally, we would like to thank Dr Ian Forbes, the editorial staff of the Journal of Micromechanics and Microengineering, and the staff of IOP Publishing for making this special section possible.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-30
... International Law: Notice of Annual Meeting The Department of State's Advisory Committee on Private International Law (ACPIL) will hold its annual meeting on developments in private international law on Thursday.... Young Faculty Conference Center, George Washington University Law School, 2000 H Street NW., Washington...
1995-02-01
capabilities for the common benefit of the NATO community; — Providing scientific and technical advice and assistance to the Military Committee in the field...Exchange of scientific and technical information; — Providing assistance to member nations for the purpose of increasing their scientific and...technical potential; — Rendering scientific and technical assistance, as requested, to other NATO bodies and to member nations in connection with
77 FR 24178 - Information Systems Technical Advisory Committee; Notice of Partially Closed Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2012-04-23
... and Introductions 2. Working Group Reports 3. Industry Presentation: E-beam Lithography 4. Industry Presentation: ENC Threshold for Satellite Modem 5. Industry Presentation: Semiconductor Manufacturing Equipment... DEPARTMENT OF COMMERCE Bureau of Industry and Security Information Systems Technical Advisory...
Rotorcraft System Identification (Identification des Systemes de Voilures Tournantes)
1991-10-01
the NATO community; - Providing scientific and technical advice and assistance to the Military Committee in the field of aerospace research and...common defence posture, - Improving the co-operation among member nations in aerospace research and development. - Exchange of scientific and...technical information; - Prcviding assistance to member nations for the purpose of increasing their scientific and technical potential, - Rendenng scientific
PREFACE: The 8th China International NanoScience and Technology Symposium
NASA Astrophysics Data System (ADS)
Cong, Hailin
2009-09-01
The 8th China International NanoScience and Technology Symposium, Xiangtan (2009) - Nano-products Exposition, sponsored by Chinese Society of Miro-nanoTechnology and IEEE Nanotechnology Council, etc will be held on 23-27 October 2009 in Xiangtan, China. This symposium is held in order to promote the technology for the development of micro- and nano-scale, cross-scale integration, to share new micro/nano technologies, to exchange information and knowledge over all fields and promote the industrialization and development of nanotechnology. This is a leading professional and traditional conference with at least 400 participants every year. Famous experts, professors and government officials at home and abroad will give lectures during the symposium, which provides a good platform for delegates to discover the latest developments and dynamics of nanotechnology. Researchers, teachers and students in colleges, and technical personnel in the industrial community are welcome to contribute and actively participate in the symposium. In our last symposium held in 2008, over 600 participants from all over the world attended, and we received over 570 abstract and paper submissions for the proceedings published in different languages in famous professional journals. And this year, we have already received over 400 submissions. After strict peer review, 60 of them are published in this volume of Journal of Physics: Conference Series. We are confident that the event will be even more successful this year. Consequently, the organizing committee and proceedings editorial committee would like to thank our colleagues at the IOP Publishing, the invited speakers, our sponsors and all the delegates for their great contributions in this conference. Hailin Cong Vice Chair of the proceedings editorial committee
NASA Astrophysics Data System (ADS)
2014-03-01
The 2013 International Conferences on Geological, Geographical, Aerospace and Earth Sciences (AeroEarth 2013), was held at the Swiss Bell Mangga Besar, Jakarta, Indonesia, on 23 December 2013. The AeroEarth conference aims to bring together researchers, engineers and scientists in the domain of interest from around the world. AeroEarth 2013 promotes interaction between the theoretical, experimental, and applied communities, so that high-level exchange is achieved in new and emerging areas within Earth Science. Through research and development, earth scientists have the power to preserve the planet's different resource domains by providing expert opinion and information about the forces which make life possible on Earth. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 91 papers and after rigorous review, 17 papers were accepted. The participants come from 8 countries. There are 3 (three) Plenary Sessions and two invited Speakers. It is an honour to present this volume of IOP Conference Series: Earth and Environmental Science (EES) and we deeply thank the authors for their enthusiastic and high-grade contribution. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of AeroEarth 2013. The AeroEarth 2013 Proceedings Editors Dr. Ford Lumban Gaol Dr. Benfano Soewito Dr. Amit Desai Further information on the invited plenary speakers and photographs from the conference can be found in the pdf.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-03
... DEPARTMENT OF THE TREASURY Internal Revenue Service Applications for Membership on the Electronic Tax Administration Advisory Committee (ETAAC) AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Request for Applications. SUMMARY: The Internal Revenue Service (IRS) requests applications of individuals...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-08
... committee has an oversight role with respect to internal audit and risk management, it is appropriate for that newly-constituted committee to have a significant role in the design and implementation of the... committee an opportunity to become familiar with the internal controls and risk management of the company...
NASA Technical Reports Server (NTRS)
1958-01-01
This document is a compilation of papers presented at the Conference on the Progress of the X-15 project held at the IAS Building, Los Angeles, California, July 28-30, 1958. The conference was held by the Research Airplane Committee of the U. S. Air Force, the U. S. Navy, and the National Advisory Committee for Aeronautics to report on the technical status of this airplane.
78 FR 32403 - Arthritis Advisory Committee; Notice of Meeting
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-30
...] Arthritis Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice... Administration (FDA). The meeting will be open to the public. Name of Committee: Arthritis Advisory Committee..., the committee will discuss the Assessment of SpondyloArthritis international Society classification...
76 FR 72023 - Notice of Meeting of the Advisory Committee on International Law
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-21
... International Law A meeting of the Advisory Committee on International Law will take place on Thursday, December 8, 2011, from 9:30 a.m. to approximately 5:30 p.m., at the George Washington University Law School...; federalism and international law; and the possibility of a new Restatement of Foreign Relations Law. Members...
75 FR 32532 - Notice of Meeting of the Advisory Committee on International Law
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-08
... International Law A meeting of the Advisory Committee on International Law will take place on Monday, June 21, 2010, from 9:30 a.m. to approximately 5:30 p.m., at the George Washington University Law School... Criminal Court review conference and ad hoc international criminal tribunals; the law of war regarding...
ERIC Educational Resources Information Center
Gell, Marilyn, Ed.
The Librarians Technical Committee of the Metropolitan Washington D.C. Council of Governments (COG) is responsible for developing cooperative programs among libraries in the Washington metropolitan area (including parts of Maryland and Virginia), among libraries of all types, and between libraries and other agencies. The committee facilitates use…
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-02
..., UPS, etc.) to the Office of Negotiations and Agreements, Foreign Agricultural Service, USDA, Room 5603.... The Office of Negotiations and Agreements may be reached by telephone at (202) 720-6219, with... sector advisory committee system to ensure that U.S. trade policy and negotiation objectives adequately...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-05
... Authorization Act (ERDDAA) codified at 42 U.S.C. 4365, to provide independent scientific and technical peer..., 2012 (76 FR 223 pp. 71561-62; 77 FR 168 pp. 52330-31, respectively). Information about the formation of.... Federal advisory committees and panels, including scientific advisory committees, provide independent...
Pacific Region: A Report Identifying and Addressing the Educational Needs
ERIC Educational Resources Information Center
US Department of Education, 2011
2011-01-01
This report represents the deliberations of the Pacific Regional Advisory Committee (RAC), one of 10 RACs established under the Educational Technical Assistance Act of 2002 to assess the educational needs of the region. The committee's report outlines educational needs across the state, districts, and territories of Hawai'i, the Commonwealth of…
ADAAG Review Federal Advisory Committee Recommendations for a New ADAAG. Final Report.
ERIC Educational Resources Information Center
Architectural and Transportation Barriers Compliance Board, Washington, DC.
This report presents the final recommendations, in the form of a new set of guidelines, of a federal advisory committee concerning revisions to the Americans with Disabilities Act Accessibility Guidelines (ADAAG). The guidelines provide scoping and technical requirements for the design, construction, and alteration of sites, facilities, buildings,…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
At the request of the Office of Solid Wastes (OSW), the SAB's Environmental Engineering Committee reviewed a draft Agency guidance for the establishment of Alternate Concentration Limits (ACL) for Resource Conservation and Recovery Act (RCRA) facilities, and two case studies demonstrating applications of the guidance. The Committee identified only obvious technical errors or omissions, which are explained in detail in the report.
Code of Federal Regulations, 2010 CFR
2010-01-01
... staff; (4) Committee computer, software or Internet service provider failures; (5) A committee's failure... software despite the respondent seeking technical assistance from Commission personnel and resources; (2) A... Commission's or respondent's computer systems or Internet service provider; and (3) Severe weather or other...
ERIC Educational Resources Information Center
Alberta Learning, Edmonton. Apprenticeship and Industry Training.
In 2001-2002, the Alberta Apprenticeship and Industry Training Board continued its collaboration with industry, government, and educators to maintain high standards of training and improve access to technical training. The board continued to strengthen the network of local and provincial apprenticeship committees, occupational committees, and…
Advisory Committee on the Redesign of the Space Station
NASA Astrophysics Data System (ADS)
1993-06-01
The Space Station Program was initiated in 1984 to provide for permanent human presence in an orbiting laboratory. This program evolved into Space Station Freedom, later identified as a component to facilitate a return of astronauts to the Moon, followed by the exploration of Mars. In March 1993 the Clinton Administration directed NASA to undertake an intense effort to redesign the space station at a substantial cost savings relative to Space Station Freedom. The Advisory Committee on the Redesign of the Space Station was established in March 1993 to provide independent assessment of the advantages and disadvantages of the redesign options. The results of the Committee's work is described. Discussion describes the mission that the Administration has articulated for the Space Station Program and the scientific and technical characteristics that a redesigned station must possess to fulfill those objectives. A description of recommended management, operations, and acquisition strategies for the redesigned program is provided. The Committee's assessment of the redesign options against five criteria are presented. The five criteria are technical capabilities, research capabilities, schedule, cost, and risk. A discussion of general mission risk is included.
Advisory Committee on the Redesign of the Space Station
NASA Technical Reports Server (NTRS)
1993-01-01
The Space Station Program was initiated in 1984 to provide for permanent human presence in an orbiting laboratory. This program evolved into Space Station Freedom, later identified as a component to facilitate a return of astronauts to the Moon, followed by the exploration of Mars. In March 1993 the Clinton Administration directed NASA to undertake an intense effort to redesign the space station at a substantial cost savings relative to Space Station Freedom. The Advisory Committee on the Redesign of the Space Station was established in March 1993 to provide independent assessment of the advantages and disadvantages of the redesign options. The results of the Committee's work is described. Discussion describes the mission that the Administration has articulated for the Space Station Program and the scientific and technical characteristics that a redesigned station must possess to fulfill those objectives. A description of recommended management, operations, and acquisition strategies for the redesigned program is provided. The Committee's assessment of the redesign options against five criteria are presented. The five criteria are technical capabilities, research capabilities, schedule, cost, and risk. A discussion of general mission risk is included.