Educational Furniture for the 16-19 Age Group: Specification and Design. Design Note 30.

ERIC Educational Resources Information Center

Furniture Industry Research Association, Stevenage (England).

A 1982 British study examined the furniture needs of 16-19 year-old students. This report presented the findings on the technical and performance requirements in terms of durability and ergonomics. This report examines the furniture requirements in teaching spaces, social, refreshment and private study areas, storage requirements for pupils'…

Design trends for Army/Air Force airplanes in the United States

NASA Technical Reports Server (NTRS)

Spearman, M. Leroy

1990-01-01

Some design trends in Army/Air Force airplane systems in the U.S. are traced from the pre-World War 2 era to the present time. Various types of aircraft systems are reviewed with a view toward noting design features that were used. Some observations concerning the design trends indicate that some may be driven by advanced technology and some by a need for new mission requirements. In addition, it is noted that some design trends are evolutionary and result in an extension of service life or utility of existing systems. In other cases the design trends may be more revolutionary with the intent of creating a system with a new capability. Some examples are included of designs that did not proceed to production for reasons that sometimes were technical and sometimes were not.

Plantation establishment: site preparation and tree planting methods

Treesearch

J. W. Van Sambeek

2008-01-01

The Silviculture and Ecology of the Central Hardwoods research unit of the USDA Forest Service is developing a series of technical notes for the management of forest lands in the Midwest. Many of the technical notes on different aspects of hardwood plantation establishment have been completed. At the request of the editor, the technical notes for site preparation, slit...

Building Science-Relevant Literacy with Technical Writing in High School

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

2006-06-02

By drawing on the in-class work of an on-going literacy outreach project, this paper explains how well-chosen technical writing activities can earn time in high-school science courses by enabling underperforming students (including ESL students) to learn science more effectively. We adapted basic research-based text-design and usability techniques into age-appropriate exercises and cases using the cognitive apprenticeship approach. This enabled high-school students, aided by explicit guidelines, to build their cognitive maturity, learn how to craft good instructions and descriptions, and apply those skills to better note taking and technical talks in their science classes.

Naval Training Device Center Index of Technical Reports.

ERIC Educational Resources Information Center

Walker, Lemuel E.

Published Naval Training Device Center technical reports and some technical notes (those available through the Defense Documentation Center-DDC) which have resulted from basic research, exploratory development, and advanced development type projects are listed. The reports are indexed by technical note number, by title, and by contractor code. The…

Writing a technical note.

PubMed

Ng, K H; Peh, W C G

2010-02-01

A technical note is a short article giving a brief description of a specific development, technique or procedure, or it may describe a modification of an existing technique, procedure or device applicable to medicine. The technique, procedure or device described should have practical value and should contribute to clinical diagnosis or management. It could also present a software tool, or an experimental or computational method. Technical notes are variously referred to as technical innovations or technical developments. The main criteria for publication will be the novelty of concepts involved, the validity of the technique and its potential for clinical applications.

Context-Aware Active Authentication using Touch Gestures, Typing Patterns and Body Movement

DTIC Science & Technology

2016-03-01

Division Information Directorate This report is published in the interest of scientific and technical information exchange, and its publication does...CA policy clarification memorandum dated 16 Jan 09. 13. SUPPLEMENTARY NOTES 14. ABSTRACT Design, develop and evaluate a desktop based active...of this project was to design, develop and evaluate a desktop active authentication system that uses the following keystroke timing based biometric

Modes of Power in Technical and Professional Visuals.

ERIC Educational Resources Information Center

Barton, Ben F.; Barton, Marthalee S.

1993-01-01

Treats visuals as sites of power inscription. Advances a Foucauldian design model based on the Panoptican--Jeremy Bentham's architectural figure for empowerment based on bimodal surveillance. Notes that numerous examples serve in demonstrating that maximum effectiveness results when visuals foster simultaneous viewing in the two panoptic modes,…

Development of Course Material in a Multi-Author Environment

ERIC Educational Resources Information Center

Schlotter, Michael

2009-01-01

Software for text processing and presentation design is becoming increasingly sophisticated. Nevertheless, it is difficult to find a good solution for collaborative writing of technical course material, allowing the creation of high quality lecture notes and presentation slides from a single source. This article presents a new editing framework…

Game of Childhood Diseases. Technical Note No. 23.

ERIC Educational Resources Information Center

Bialosiewicz, Frank; Burns, Julie

Designed to create an awareness of health problems among children in Third World settings, the board game uses simulation and role playing to help participants identify the symptoms and consequences of six childhood diseases preventable by vaccination: measles, whooping cough, tetanus, diphtheria, polio, and tuberculosis. The game also helps…

BASIC Language Flow Charting Program (BASCHART). Technical Note 3-82.

ERIC Educational Resources Information Center

Johnson, Charles C.; And Others

This document describes BASCHART, a computer aid designed to decipher and automatically flow chart computer program logic; it also provides the computer code necessary for this process. Developed to reduce the labor intensive manual process of producing a flow chart for an undocumented or inadequately documented program, BASCHART will…

Low Cost Technical Solutions to Jump Start an Insider Threat Program

DTIC Science & Technology

2016-05-11

Low Cost Technical Solutions to Jump Start an Insider Threat Program George J. Silowash Derrick L. Spooner Daniel L. Costa Michael J...Albrethsen May 2016 TECHNICAL NOTE CMU/SEI-2016-TN-004 CERT Division http://www.sei.cmu.edu Copyright 2016 Carnegie Mellon University This... technical note will explore tools that may be suitable for satisfying the basic technical needs of an insider threat program, giving organizations a

The 1984 ARI Survey of Army Recruits: Tabular Description of NPS Army Reserve Guard Accessions. Volume 1

DTIC Science & Technology

1986-05-01

NOTE: The findings in this report are not to be construed as an official Department of tht Army position, unless so designated by othtr author «ted...of information for Army policymakers and planners. These surveys were origi- nally designed in 1982 to answer questions concerning the demo...research planning, survey design and administra- tion, as well as personnel for the technical monitoring of the contract and construction of the

Environmental effects of dredging: Methods for the assessment of the genotoxic effects of environmental contaminants. Glossary and references. Technical notes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Honeycutt, M.E.; Jarvis, A.S.; McFarland, V.A.

1995-07-01

This technical note is the third in a series of three that outline and describe the principal methods that have been developed to test the potential of environmental contaminants to cause mutagenic, carcinogenic, and teratogenic effects. The first in this series (EEDP-04-24) describes methods used to discern genotoxic effects at the sub cellular level, while the second (EEDP-04-25) describes methods used to discern genotoxic effects at the cellular and organ/organism level. Recent literature citations for each topic referenced in this series of technical notes are provided in this technical note, in addition to a glossary of terms. The information inmore » these technical notes is intended to provide Corps of Engineers personnel with a working knowledge of the terminology and conceptual basis of genotoxicity testing. To develop an improved understanding of the concepts of genotoxicity, readers are encouraged to review A Primer in Genotoxicity (Jarvis, Reilly, and Lutz 1993), presented in Volume D-93-3 of the Environmental Effects of Dredging information exchange bulletin.« less

The design of an insulin pump - preliminary requirements (a technical note)

NASA Astrophysics Data System (ADS)

Hawlas, Hubert J.; Lewenstein, Krzysztof

2009-01-01

The material presented in this paper is an attempt to lay down requirements for the planned design of an insulin pump. An insulin pump is a device for continuous dosage of insulin at a selected rate, which facilitates treatment and improves the lives of diabetic patients. This paper is a compilation of medical requirements and user suggestions of presently offered insulin pumps. It seems important to establish proper requirements for a device before starting developing any design for an insulin pump.

Drug Impact Index.

ERIC Educational Resources Information Center

Western Center for Drug-Free Schools and Communities.

The Drug Impact Index provides a set of indicators designed to determine the extent of the local drug problem in a community. Each indicator includes a technical note on the data sources, a graph showing comparative statistics on that indicator for the Portland area and for the State of Oregon, and brief remarks on the implications of the data.…

Market Rummy. Technical Note No. 4.

ERIC Educational Resources Information Center

Gunter, Jock

A card game, "Mercado," or Market Rummy, designed to teach basic market skills to rural Ecuadorians is described. Two to five people can play the game, which is presently used in night community meetings and in the educational program in coastal cooperatives. The game consists of two decks of cards: one represents money, the other…

Hacienda. Technical Note No. 3.

ERIC Educational Resources Information Center

Hoxeng, James

This paper describes a simulation game, "Hacienda," designed to replicate the economic and social realities of the peasants' situation in rural Ecuador. The game involves three to 15 players (and often more), one of whom, by a roll of the dice, takes the role of "hacendado," or hacienda owner, who gains title to all the…

NCAR CSM ocean model by the NCAR oceanography section. Technical note

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This technical note documents the ocean component of the NCAR Climate System Model (CSM). The ocean code has been developed from the Modular Ocean Model (version 1.1) which was developed and maintained at the NOAA Geophysical Fluid Dynamics Laboratory in Princeton. As a tribute to Mike Cox, and because the material is still relevant, the first four sections of this technical note are a straight reproduction from the GFDL Technical Report that Mike wrote in 1984. The remaining sections document how the NCAR Oceanography Section members have developed the MOM 1.1 code, and how it is forced, in order tomore » produce the NCAR CSM Ocean Model.« less

Technical Note: Daily variation in intake of a salt-limited supplement by grazing steers

USDA-ARS?s Scientific Manuscript database

The objective of this research was to develop and test an automated supplement intake measurement system (SmartFeed, SF) in grazing trials. The SF was developed by C-lock Inc., (Rapid City, SD), and was designed using a stainless steel feed bin with load cells and an radio frequency identification ...

The Need for Careful Data Collection for Pattern Recognition in Digital Pathology.

PubMed

Marée, Raphaël

2017-01-01

Effective pattern recognition requires carefully designed ground-truth datasets. In this technical note, we first summarize potential data collection issues in digital pathology and then propose guidelines to build more realistic ground-truth datasets and to control their quality. We hope our comments will foster the effective application of pattern recognition approaches in digital pathology.

Technical Note: Field-observed angles of repose for stored grain in the United States

USDA-ARS?s Scientific Manuscript database

Bulk grain angle of repose (AoR) is a key parameter for inventorying grain, predicting flow characteristics, and designing bins and grain handling systems. The AoR is defined for two cases, piling (dynamic) or emptying (static), and usually varies with grain type. The objective of this study was to ...

Prostate Cancer Rates by Race and Ethnicity

MedlinePlus

... P25–1130). For more information, see the USCS technical notes. † Race categories are not mutually exclusive from ... with caution. For more information, see the USCS technical notes. ¶ Data are compiled from cancer registries that ...

LUVOIR Tech Notes

NASA Technical Reports Server (NTRS)

Bolcar, Matthew R.; Shaklan, Stuart; Roberge, Aki; Rioux, Norman; Feinberg, Lee; Werner, Michael; Rauscher, Bernard; Mandell, Avi; France, Kevin; Schiminovich, David

2016-01-01

We present nine "tech notes" prepared by the Large UV/Optical/Infrared (LUVOIR) Science and Technology Definition Team (STDT), Study Office, and Technology Working Group. These tech notes are intended to highlight technical challenges that represent boundaries in the trade space for developing the LUVOIR architecture that may impact the science objectives being developed by the STDT. These tech notes are intended to be high-level discussions of the technical challenges and will serve as starting points for more in-depth analysis as the LUVOIR study progresses.

Environmental effects of dredging. Documentation of the efqual module for ADDAMS: Comparison of predicted effluent water quality with standards. Technical notes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palermo, M.R.; Schroeder, P.R.

This technical note describes a technique for comparison of the predicted quality of effluent discharged from confined dredged material disposal areas with applicable water quality standards. This note also serves as documentation of a computer program called EFQUAL written for that purpose as part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

NOTES: a review of the technical problems encountered and their solutions.

PubMed

Mintz, Yoav; Horgan, Santiago; Cullen, John; Stuart, David; Falor, Eric; Talamini, Mark A

2008-08-01

Natural orifice translumenal endoscopic surgery (NOTES) is currently investigated and developed worldwide. In the past few years, multiple groups have confronted this challenge. Many technical problems are encountered in this technique due to the currently available tools for this approach. Some of the unique technical problems in NOTES include: blindly performed primary incisions; uncontrolled pneumoperitoneal pressure; no support for the endoscope in the abdominal cavity; inadequate vision; insufficient illumination; limited retraction and exposure; and the complexity of suturing and performing a safe anastomosis. In this paper, we review the problems encountered in NOTES and provide possible temporary solutions. Acute and survival studies were performed on 15 farm pigs. The hybrid technique approach (i.e., endoscopic surgery with the aid of laparoscopic vision) was performed in all cases. Procedures performed included liver biopsies, bilateral tubal ligation, oophprectomy, cholecystectomy, splenectomy and small bowel resection, and anastomosis. All attempted procedures were successfully performed. New methods and techniques were developed to overcome the technical problems. Closure of the gastrotomy was achieved by T-bar sutures and by stapler closure of the stomach incision. Small bowel anastomosis was achieved by the dual-lumen NOTES technique. The hybrid technique serves as a temporary approach to aid in developing the NOTES technique. A rectal or vaginal port of entry enables and facilitates gastrointestinal NOTES by using available laparoscopic instruments. The common operations performed today in the laparoscopic fashion could be probably performed in the NOTES approach. The safety of these procedures, however, is yet to be determined.

77 FR 8288 - Applications and Amendments to Facility Operating Licenses Involving Proposed No Significant...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-14

... not listed on the Web site, but should note that the NRC's E-Filing system does not support unlisted... (COLR), to update the methodology reference list to support the core design with the new AREVA fuel... methodologies listed in Technical Specification 5.7.1.5 has no impact on any plant configuration or system...

Design of an Integrated Division-Level Battle Simulation for Research, Development, and Training. Volume 2. Detailed Design Notes

DTIC Science & Technology

1979-08-01

frag orders for tactical considerations. Frag orders issued by simulated modules will be " edited " by the same procedure as that used with populated...record and distributed as required. Queries transmitted from any staff module will be reviewed and edited at event time for technical accuracy. If an...of this kind will have to be carefully edited and interpreted by the control- ler(s) and/or computer before the chanqe is instituted in the real world

Technical Preparation of the Airplane "Spirit of St. Louis."

NASA Technical Reports Server (NTRS)

Hall, Donald A

1927-01-01

Given here is a brief history of the design and construction of the "Spirit of St. Lewis", the airplane that Charles Lindbergh flew solo across the Atlantic. Although the plan was to modify a standard model Ryan M-2, it was quickly determined that modification was less practical than redesign. Colonel Lindbergh's active participation in the design of the aircraft is noted. Given here are the general dimensions, specifications, weight characteristics, and man hours required to build the aircraft.

Smartphone application for multi-phasic interventional trials in psychiatry: Technical design of a smart server.

PubMed

Zhang, Melvyn W B; Ho, Roger C M

2017-01-01

Smartphones and their accompanying applications are currently widely utilized in various healthcare interventions. Prior to the deployment of these tools for healthcare intervention, typically, proof of concept feasibility studies, as well as randomized trials are conducted to determine that these tools are efficacious prior to their actual implementation. In the field of psychiatry, most of the current interventions seek to compare smartphone based intervention against conventional care. There remains a paucity of research evaluating different forms of interventions using a single smartphone application. In the field of nutrition, there has been recent pioneering research demonstrating how a multi-phasic randomized controlled trial could be conducted using a single smartphone application. Despite the innovativeness of the previous smartphone conceptualization, there remains a paucity of technical information underlying the conceptualization that would support a multi-phasic interventional trial. It is thus the aim of the current technical note to share insights into an innovative server design that would enable the delivery of multi-phasic trials.

Environmental Factors Influencing Blooms of a Neurotoxic Stigonematalan Cyanobacterium Responsible for Avian Vacuolar Myelinopathy

DTIC Science & Technology

2013-01-01

aquatic plants and subsequent ecological consequences. The authors of this technical note have linked avian vacuolar myelinopathy (AVM), a disease...additional cyanobacteria sequences to determine designations for probe development, to advance understanding of the species’ phylogeny , and to lay...groundwork for its formal description. Phylogeny data confirm that the species is in section V, order Stigonematales. Phylogeny also infers that the

Research on spacecraft electrical power conversion

NASA Technical Reports Server (NTRS)

Wilson, T. G.

1983-01-01

The history of spacecraft electrical power conversion in literature, research and practice is reviewed. It is noted that the design techniques, analyses and understanding which were developed make today's contribution to power computers and communication installations. New applications which require more power, improved dynamic response, greater reliability, and lower cost are outlined. The switching mode approach in electronic power conditioning is discussed. Technical aspects of the research are summarized.

Technical Note: The Relationship Between Heart Rate and Energy Expenditure in Growing Crossbred Boer and Spanish Wethers

USDA-ARS?s Scientific Manuscript database

Eight Boer (75%) x Spanish (BS) and 8 Spanish (S) wethers (155 +/- 8 d of age and 19.2 +/- 2.3 kg BW, initial) were used in a replicated crossover design with a 2 x 2 factorial arrangement of treatments to determine effects of genotype, diet quality, and time of the day on energy expenditure (EE), r...

Systems Engineering of Electric and Hybrid Vehicles

NASA Technical Reports Server (NTRS)

Kurtz, D. W.; Levin, R. R.

1986-01-01

Technical paper notes systems engineering principles applied to development of electric and hybrid vehicles such that system performance requirements support overall program goal of reduced petroleum consumption. Paper discusses iterative design approach dictated by systems analyses. In addition to obvious peformance parameters of range, acceleration rate, and energy consumption, systems engineering also considers such major factors as cost, safety, reliability, comfort, necessary supporting infrastructure, and availability of materials.

Combinational Optimal Stopping Problems

DTIC Science & Technology

2016-04-01

such as final, technical, interim, memorandum, master’s thesis, progress, quarterly, research , special, group study, etc. 3. DATES COVERED...Vinel, A. and P. Krokhmal (2015) Certainty equivalent measures of risk, Annals of Operations Research , DOI:10.1007/s10479-015-1801-0. [3] Chernikov...Operations Research , 50(3):415–423, 2002. [16] I. Ljubi, P. Mutzel, and B. Zey. Stochastic survivable network design problems. Electronic Notes in Discrete

A simplified modification of a reconstruction plate into a mandibular transport distraction device: A technical note.

PubMed

Mohanty, Sujata; Dabas, Jitender; Gupta, Rekha

2015-01-01

Transport distraction is nowadays gaining enormous popularity and is becoming a promising option for reconstruction of mandibular defects. However, the vast number of distraction device designs create huge confusion in the clinician's mind to choose the right one. Considering these complex and costly designs, the authors decided to find a simplified way of combining a modified conventional reconstruction plate and monofocal distraction device that can act as a transport distraction device for bridging of bony defects. A case performed by this technique and device has been presented along with the description of device design.

Quantifying Similarity and Distance Measures for Vector-Based Datasets: Histograms, Signals, and Probability Distribution Functions

DTIC Science & Technology

2017-02-01

note, a number of different measures implemented in both MATLAB and Python as functions are used to quantify similarity/distance between 2 vector-based...this technical note are widely used and may have an important role when computing the distance and similarity of large datasets and when considering high...throughput processes. In this technical note, a number of different measures implemented in both MAT- LAB and Python as functions are used to

Indexation Rules for Metallurgy in PASCAL. Original Title: Regles d'Indexation de la Metallurgie'--Technical Note Issued by Informascience--January 1980. Translated by Marie Wallin.

ERIC Educational Resources Information Center

Royal Inst. of Tech., Stockholm (Sweden). Library.

The indexing rules presented are designed for use with a new French-German database on metallurgy being developed under an agreement by CNRS (Centre National de la Recherche Scientifique, Paris) and BAM (Bundesanstalt fur Materialprufung, Berlin). The new database, which will feature multilingual titles and index terms (French-German-English-) and…

Determination of the Composition and Quantity of Phthalate Ester Additives in PVC Children's Toys. Greenpeace Research Laboratories Technical Note 06/97.

ERIC Educational Resources Information Center

Stringer, Ruth; Labounskaia, Irina; Santillo, David; Johnston, Paul; Siddorn, John; Stephenson, Angela

Polyvinyl chloride (vinyl or PVC) is widely used in toys and other children's products. This study, conducted by Greenpeace, examined the composition and quantity of phthalate ester additives in children's PVC toys, used to give the toys added flexibility. Drawn from 17 countries, a total of 71 toys designed to be chewed by babies and young…

Evolutionary Systems Design: Recognizing Changes in Security and Survivability Risks

DTIC Science & Technology

2006-09-01

Unlimited distribution subject to the copyright. Technical Note CMU/SEI-2006-TN-027 The Software Engineering Institute is a federally...CARNEGIE MELLON UNIVERSITY AND SOFTWARE ENGINEERING INSTITUTE MATERIAL IS FURNISHED ON AN “AS-IS” BASIS. CARNEGIE MELLON UNIVERSITY MAKES NO WARRANTIES OF...created in the performance of Federal Government Contract Number FA8721-05-C-0003 with Carnegie Mellon University for the operation of the Software

TACS Central Control Facility.

DTIC Science & Technology

1981-02-12

PULSE RTC REAL TIME CLOCK -{> I . SIGNAL INVERSION UASC UNIVERSAL ASYNCHRONOUS SERIAL - ---- 4w SPECIAL INTERFACE CONTROLLER Fiq. 2-1. MAC hardware...34 Universal Asynchronous Serial Controller" (UASC) cards. The cards implement an RS-232 standard interface. All controllers are set to operate at a data...Bridwell and I. Richer, "A Preliminary Design of a TDMA System for FLEETSAT," Technical Note 1975-5, Lincoln Laboratory, M.I.T. (12 March 1975), DDC

HIPAA: update on rule revisions and compliance requirements.

PubMed

Maddox, P J

2002-01-01

Due to the highly technical requirements for HIPAA compliance and the numerous administrative and clinical functions and processes involved, guidance from experts who are knowledgeable about systems design and use to secure private data is necessary. In health care organizations, this will require individuals who are knowledgeable about clinical processes and those who understand health information technology, security, and privacy to work together to establish an entity's compliance plans and revise operations and practices accordingly. As a precondition of designing such systems, it is essential that covered entities understand the HIPAA's statutory requirements and timeline for compliance. An organization's success in preparing for HIPAA will depend upon an active program of assessment, planning, and implementation. Compliance with security and privacy standards can be expected to increase costs initially. However, greater use of EDI is expected to reduce costs and enhance revenues in the long run if processes and systems are improved. NOTE: Special protection for psychotherapy notes holds them to a higher standard of protection. Notes used only by a psychotherapist are not intended to be shared with anyone and are not considered part of the medical record.

Kepler Archive Manual

NASA Technical Reports Server (NTRS)

Thompson, Susan E.; Fraquelli, Dorothy; Van Cleve, Jeffrey E.; Caldwell, Douglas A.

2016-01-01

A description of Kepler, its design, performance and operational constraints may be found in the Kepler Instrument Handbook (KIH, Van Cleve Caldwell 2016). A description of Kepler calibration and data processing is described in the Kepler Data Processing Handbook (KDPH, Jenkins et al. 2016; Fanelli et al. 2011). Science users should also consult the special ApJ Letters devoted to early Kepler results and mission design (April 2010, ApJL, Vol. 713 L79-L207). Additional technical details regarding the data processing and data qualities can be found in the Kepler Data Characteristics Handbook (KDCH, Christiansen et al. 2013) and the Data Release Notes (DRN). This archive manual specifically documents the file formats, as they exist for the last data release of Kepler, Data Release 25(KSCI-19065-002). The earlier versions of the archive manual and data release notes act as documentation for the earlier versions of the data files.

Procurement engineering - the productivity factor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bargerstock, S.B.

1993-01-01

The industry is several years on the road to implementation of the Nuclear Management and Resources Council (NUMARC) initiatives on commercial-grade item dedication and procurement. Utilities have taken several approaches to involve engineering in the procurement process. A common result for the approaches is the additional operations and maintenance (O M) cost imposed by the added resource requirements. Procurement engineering productivity is a key element in controlling this business area. Experience shows that 400 to 500% improvements in productivity are possible with a 2-yr period. Improving the productivity of the procurement engineering function is important in today's competitive utility environment.more » Procurement engineering typically involves four distinct technical evaluation responsibilities along with several administrative areas. Technical evaluations include the functionally based safety classification of replacement components and parts (lacking a master parts list), the determination of dedication requirements for safety-related commercial-grade items, the preparation of a procurement specification to maintain the licensed design bases, and the equivalency evaluation of alternate items not requiring the design-change process. Administrative duties include obtaining technical review of vendor-supplied documentation, identifying obsolete parts and components, resolving material nonconformances, initiating the design-change process for replacement items (as needed), and providing technical support to O M. Although most utilities may not perform or require all the noted activities, a large percentage will apply to each utility station.« less

PLAY HANDS PROTECTIVE GLOVES: TECHNICAL NOTE ON DESIGN AND CONCEPT.

PubMed

Houston-Hicks, Michele; Lura, Derek J; Highsmith, M Jason

2016-09-01

Cerebral Palsy (CP) is the leading cause of childhood motor disability, with a global incidence of 1.6 to 2.5/1,000 live births. Approximately 23% of children with CP are dependent upon assistive technologies. Some children with developmental disabilities have self-injurious behaviors such as finger biting but also have therapeutic needs. The purpose of this technical note is to describe design considerations for a protective glove and finger covering that maintains finger dexterity for children who exhibit finger and hand chewing (dermatophagia) and require therapeutic range of motion and may benefit from sensory stimulation resulting from constant contact between glove and skin. Protecting Little and Adolescent Youth (PLAY) Hands are protective gloves for children with developmental disorders such as CP who injure themselves by biting their hands due to pain or sensory issues. PLAY Hands will be cosmetically appealing gloves that provide therapeutic warmth, tactile sensory feedback, range of motion for donning/ doffing, and protection to maximize function and quality of life for families of children with developmental disorders. The technology is either a per-finger protective orthosis or an entire glove solution designed from durable 3D-printed biodegradable/bioabsorbable materials such as thermoplastics. PLAY Hands represent a series of protective hand wear interventions in the areas of self-mutilating behavior, kinematics, and sensation. They will be made available in a range of protective iterations from single- or multi-digit finger orthoses to a basic glove design to a more structurally robust and protective iteration. To improve the quality of life for patients and caregivers, they are conceptualized to be cosmetically appealing, protective, and therapeutic.

Preliminary Results Obtained in Integrated Safety Analysis of NASA Aviation Safety Program Technologies

NASA Technical Reports Server (NTRS)

2001-01-01

This is a listing of recent unclassified RTO technical publications processed by the NASA Center for AeroSpace Information from January 1, 2001 through March 31, 2001 available on the NASA Aeronautics and Space Database. Contents include 1) Cognitive Task Analysis; 2) RTO Educational Notes; 3) The Capability of Virtual Reality to Meet Military Requirements; 4) Aging Engines, Avionics, Subsystems and Helicopters; 5) RTO Meeting Proceedings; 6) RTO Technical Reports; 7) Low Grazing Angle Clutter...; 8) Verification and Validation Data for Computational Unsteady Aerodynamics; 9) Space Observation Technology; 10) The Human Factor in System Reliability...; 11) Flight Control Design...; 12) Commercial Off-the-Shelf Products in Defense Applications.

Progress Report on Reactivity Analyses (October-December Test Data). Beginning Teacher Evaluation Study. Technical Note Series. Technical Note III-5.

ERIC Educational Resources Information Center

Filby, Nikola N.

The development and refinement of the measures of student achievement in reading and mathematics for the Beginning Teacher Evaluation Study are described. The concept of reactivity to instruction is introduced: the tests used to evaluate instructional processes must be sensitive indicators of classroom learning overtime. Data collection activities…

Technical Note for 8D Likelihood Effective Higgs Couplings Extraction Framework in the Golden Channel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Yi; Di Marco, Emanuele; Lykken, Joe

2014-10-17

In this technical note we present technical details on various aspects of the framework introduced in arXiv:1401.2077 aimed at extracting effective Higgs couplings in themore » $$h\\to 4\\ell$$ `golden channel'. Since it is the primary feature of the framework, we focus in particular on the convolution integral which takes us from `truth' level to `detector' level and the numerical and analytic techniques used to obtain it. We also briefly discuss other aspects of the framework.« less

Continuing Support of Cloud Free Line of Sight Determination Including Whole Sky Imaging of Clouds

DTIC Science & Technology

2007-11-30

which is documented in Shields et al. 2007a, Technical Note 271, and Contract N00014-01-D- 0043 DO #11, which is reviewed in Section 2 and documented in...Shields et al. 2007b, Technical Note 272. Under DO #13, we finished preparation of two of the WSI units and their software, and fielded them...and b, and 2005b and c). One of the first two units was fielded at the Air Force’s Starfire Optical Range in October 1992. Technical Memo AV06

Inorganic-Organic Polymers and Their Role in Materials Science

DTIC Science & Technology

1994-05-18

North Quincy Street AD-A279 715 Arlington, Virginia 22217-5000 H IM 11. SUPPLEMENTARY NOTES Prepared for publication in ADVAtICED MlATERIALS 12a...This document has been approved for public release; distribution is unlimited. 13. ABSTRACT (Maximum 200 words) The design and synthesis of new...Technical Report No. 19 INORGANIC-ORGANIC POLYMERS AND THEIR ROLE IN MATERIALS SCIENCE by Harry R. Allcock Prepared for Publication in Advanced Materials

Fiscal year 1981 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Thacker, S. S. (Compiler)

1981-01-01

This bibliography lists approximately 503 formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY-1981. It also includes papers of MSFC contractors. Citations announced in the NASA scientific and technical information system are noted.

42 CFR 493.1411 - Standard; Technical consultant qualifications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... training or experience to provide technical consultation for each of the specialties and subspecialties of... responsible. Note: The technical consultant requirements for “laboratory training or experience, or both” in... 42 Public Health 5 2010-10-01 2010-10-01 false Standard; Technical consultant qualifications. 493...

Time Value of Money and Its Applications in Corporate Finance: A Technical Note on Linking Relationships between Formulas

ERIC Educational Resources Information Center

Chen, Jeng-Hong

2009-01-01

Time Value of Money (TVM) is the most important chapter in the basic corporate finance course. It is imperative to understand TVM formulas because they imply important TVM concepts. Students who really understand TVM concepts and formulas can learn better in chapters of TVM applications. This technical note intends to present more complete TVM…

Research Notes - An Introduction to Openness and Evolvability Assessment

DTIC Science & Technology

2016-08-01

importance of different business and technical characteristics that combine to achieve an open solution. The complexity of most large-scale systems of...process characteristic)  Granularity of the architecture (size of functional blocks)  Modularity (cohesion and coupling)  Support for multiple...Description)  OV-3 (Operational Information Exchange Matrix)  SV-1 (Systems Interface Description)  TV-1 ( Technical Standards Profile). Note that there

Proceedings of the F-8 Digital Fly-By-Wire and Supercritical Wing First Flight's 20th Anniversary Celebration. Volume 2; Bibliography Appendices

NASA Technical Reports Server (NTRS)

Hodge, Kenneth E. (Compiler); Kellogg, Yvonne (Editor)

1996-01-01

A technical symposium, aircraft display dedication, and pilots' panel discussion were held on May 27, 1992. to commemorate the 20th anniversary of the first flights of the F-8 Digital Fly-By-Wire (DFBW) and Supercritical Wing (SCW) research aircraft. The symposium featured technical presentations by former key government and industry participants in the advocacy, design, aircraft modification, and flight research program activities. The DFBW and SCW technical contributions are cited. A dedication ceremony marked permanent display of both program aircraft. The panel discussion participants included eight of the eighteen research and test pilots who flew these experimental aircraft. Pilots' remarks include descriptions of their most memorable flight experiences. The report also includes a survey of the Gulf Air War, an after-dinner presentation by noted aerospace author and historian Dr. Richard Hallion.

Bioethics for Technical Experts

NASA Astrophysics Data System (ADS)

Asano, Shigetaka

Along with rapidly expanding applications of life science and technology, technical experts have been implicated more and more often with ethical, social, and legal problems than before. It should be noted that in this background there are scientific and social uncertainty elements which are inevitable during the progress of life science in addition to the historically-established social unreliability to scientists and engineers. In order to solve these problems, therefore, we should establish the social governance with ‘relief’ and ‘reliance’ which enables for both citizens and engineers to share the awareness of the issues, to design social orders and criterions based on hypothetical sense of values for bioethics, to carry out practical use management of each subject carefully, and to improve the sense of values from hypothetical to universal. Concerning these measures, the technical experts can learn many things from the present performance in the medical field.

Proceedings of the F-8 Digital Fly-By-Wire and Supercritical Wing First Flight's 20th Anniversary Celebration. Volume 1

NASA Technical Reports Server (NTRS)

Hodge, Kenneth E. (Compiler)

1996-01-01

A technical symposium, aircraft display dedication, and pilots' panel discussion were held on May 27, 1992, to commemorate the 20th anniversary of the first flights of the F-8 Digital Fly-By-Wire (DFBW) and Supercrit- ical Wing (SCW) research aircraft. The symposium featured technical presentations by former key government and industry participants in the advocacy, design, aircraft modification, and flight research program activities. The DFBW and SCW technical contributions are cited. A dedication ceremony marked permanent display of both program aircraft. The panel discussion participants included eight of the eighteen research and test pilots who flew these experimental aircraft. Pilots' remarks include descriptions of their most memorable flight experiences The report also includes a survey of the Gulf Air War, and an after-dinner presentation by noted aerospace author and historian Dr. Richard Hallion.

The Palenque Project: A Process of Design and Development as Research in the Evolution of an Optical Disc Prototype for Children. Technical Report No. 47.

ERIC Educational Resources Information Center

Wilson, Kathleen S.; Tally, William J.

This report describes the Palenque Project, a highly interactive, multimedia, optical disc research prototype which was developed for home use and tested by observing 25 children in the 9 to 14 year age range and their families and 8 12-year-olds in pairs. It is noted that the project was intended to create a rich, multimedia database environment…

CRREL (Cold Regions Research and Engineering Laboratory) Technical Publications. Supplement, October 1986-September 1988

DTIC Science & Technology

1988-09-01

1000. Extensive post -test optical analysis allowed Antenna polarization and height, and sigaal stacking estimation of the size distribution and number of...to 10 C higher under natural activated sludge. A design example is presented for conditions than in the wind tunnel studies. Results each case. All...typically limitations of the methcd are presented, examples are columnar type crystal structure. The remaining 2i% shown, and notes on user instructions are

Documentation of the runqual module for ADDAMS: Comparison of predicted runoff water quality with standards. Environmental effects of dredging. Technical notes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schroeder, P.R.; Gibson, A.C.; Dardeau, E.A.

This technical note has a twofold purpose: to describe a technique for comparing the predicted quality of surface runoff from confined dredged material disposal areas with applicable water quality standards and to document a computer program called RUNQUAL, written for that purpose as a part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

[Technical notes on mastectomy performed as part of transsexualism F to M].

PubMed

Roffé, J-L

2012-08-01

Mastectomy in case of large breast should use a particular technique. The principle of mastectomy by periareolar flap or higher in MAP must be abandoned in favor of mastectomy by lower horizontal with the office of the WFP transformed by a tummy. Main technical note contains the plasty in MAP because the conventional mastectomy is well known. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

Turning Operational Lessons Learned into Design Reality

NASA Technical Reports Server (NTRS)

Brady, David A.

2009-01-01

The capabilities and limitations of a particular system design are well known by the people who operate it. Operational workarounds, operational notes and lessons learned are traditional methods for dealing with and documenting design shortcomings. The beginning of each new program brings the hope that hard-learned lessons will be incorporated into the next new system. But often operations personnel find their well-intentioned efforts frustrated by an inability to have their inputs considered by design personnel who have strictly-scoped requirements that are coupled with ambitious cost and schedule targets. There is a way for operational inputs to make it into the design, but the solution involves a combination of organizational culture and technical data. Any organization that utilizes this approach can realize significant benefits over the life cycle of their project.

TECHNICAL BASIS FOR A CANDIDATE BUILDING MATERIALS RADIUM STANDARD

EPA Science Inventory

The report summarizes the technical basis for a candidate building materials radium standard. It contains the standard and a summary of the technical basis for the standard. (NOTE: The Florida Radon Research Program (FRRP), sponsored by the Environmental Protection Agency and the...

Describing Acupuncture: A New Challenge for Technical Communicators.

ERIC Educational Resources Information Center

Karanikas, Marianthe

1997-01-01

Considers acupuncture as an increasingly popular alternative medical therapy, but difficult to describe in technical communication. Notes that traditional Chinese medical explanations of acupuncture are unscientific, and that scientific explanations of acupuncture are inconclusive. Finds that technical communicators must translate acupuncture for…

TADS and Technical Assistance.

ERIC Educational Resources Information Center

Trohanis, Pascal L.

1983-01-01

Accomplishments of the Technical Assistance Development System (TADS) are cited, current challenges (including program development, and communication and coordination) are noted, and the mission mandated for TADS is outlined. (CL)

Sediment Scaling for Mud Mountain Fish Barrier Structure

DTIC Science & Technology

2017-06-28

2nd Int. Conf. on the Application of Physical Modeling to Port and Coastal Protection – Coastlab ’08, International Association for Hydro...Structure by Jeremy A. Sharp, Gary L. Brown, and Gary L. Bell PURPOSE: This Coastal and Hydraulics Laboratory technical note describes the process of... Coastal and Hydraulics Laboratory. Questions about this technical note can be addressed to Mr. Sharp at 601-634-4212 or Jeremy.A.Sharp@usace.army.mil

Guidelines for Review of EA/EIS Documents.

DTIC Science & Technology

1980-08-01

document. If two or more alternatives are being considered, the technical review (Chapter 4) should be repeated for each. 5. Consolidate the responses from...preparing the EIS. Normally the list will not exceed two pages. No: Note deficiencies and continue to 3c(9). A Yes: Continue to 3 c(9). (9) Does the EAIEIS...through 67) summarizing each of the 13 areas have been designed to help the reviewer perform two tasks The lrst task is to evaluate the adequac\\ of the F-A

Introduction of Building Information Modeling (BIM) Technologies in Construction

NASA Astrophysics Data System (ADS)

Milyutina, M. A.

2018-05-01

The issues of introduction of building information modeling (BIM) in construction industry are considered in this work. The advantages of this approach and perspectives of the transition to new design technologies, construction process management, and operation in the near future are stated. The importance of development of pilot projects that should identify the ways and means of verification of the regulatory and technical base, as well as economic indicators in the transition to Building Information Technologies in the construction, is noted.

Technical note: false catastrophic age-at-death profiles in commingled bone deposits.

PubMed

Sołtysiak, Arkadiusz

2013-12-01

Age-at-death profiles obtained using the minimum number of individuals (MNI) for mass deposits of commingled human remains may be biased by over-representation of subadult individuals. A computer simulation designed in the R environment has shown that this effect may lead to misinterpretation of such samples even in cases where the completeness rate is relatively high. The simulation demonstrates that the use of the Most Likely Number of Individuals (MLNI) substantially reduces this bias. Copyright © 2013 Wiley Periodicals, Inc.

Industrial Fuel Gas Demonstration Plant Program. Bid packages for materials (Deliverable No. 28)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1979-01-01

Fixed-price supply type bid packages for materials and/or service essentially are comprised of two parts, namely: (1) a technical requisition of the material, equipment, or service to be supplied; and (2) commercial and legal requirements, normally referred to as terms and conditions. Requisitions, providing technical requirements, for all equipment items identified for the Industrial Fuel Gas Demonstration Plant may be found in the 12 volumes of the Demonstration Plant Mechanical Design. The requisitions have been included within separate sections of the design report, sorted by appropriate plant unit. Combined with any General Notes Requisition and the necessary FWEC Job Standards,more » these various item requisitions provide all technical information for the prospective vendor to furnish his bid. The terms and conditions (boiler plate) to be included in the bid package identify all the contractual requirements which will be imposed upon the bidder. These requirements cover the conditions he must meet to bid on the particular item as well as the clauses to be included within the eventual purchase order/subcontract. A typical package of such terms and conditions is included.« less

75 FR 69348 - Change of Addresses for Submission of Certain Reports; Technical Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-12

...) except the note. 0 h. By revising paragraph (b)(EEE) except the note. Sec. 60.4 Address. (a) * * * Region... 320, P.O. Box 2509, Grass Valley, CA 95945-2509. Northern Sonoma County Air Pollution Control District... the note. 0 h. By revising paragraph (b)(EEE) except the note. Sec. 61.04 Address. (a) * * * Region IX...

75 FR 33989 - Export Administration Regulations: Technical Corrections

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-16

... 0694-AE69 Export Administration Regulations: Technical Corrections AGENCY: Bureau of Industry and... section of Export Control Classification Number 2B001 and the other is in the Technical Note on Adjusted... language regarding certain performance criteria of turning machines covered by Export Control...

Technical Writing across the Curriculum: Epics.

ERIC Educational Resources Information Center

Olds, Barbara M.

Noting that technically competent graduates of professional schools need additional skills to function effectively in an increasingly complex and global society, this paper describes an innovative program in technical writing developed for undergraduate engineering students at the Colorado School of Mines. The paper first provides background…

Electronic Principles Inventory Sheppard Technical Training Center, AFPT 90-EPI-485.

DTIC Science & Technology

1984-06-01

properly applied, OSR data can be a powerful tool in the design of training content, Generally speaking, OSR task statements can sometimes be difficult... designing blocks specific to the various specialties. Other than the differences noted in the Missile Systems Analyst and Biomedical Equipment personnel...m 4-jj K i I Li u 0 2I L- DC A U --SI De O) ZW :𔃾 )m-4 14~ =i0. 40o 0 w w L4- 1-0. 454 01 Z.I 4 mz c xx 1 Z4.. C, * L CX "*4. 0 4 I..j CL z 49 I. I

Technical notes published in BJOMS over a 2-year period--should we be doing it differently?

PubMed

Singh, M; Shekar, K; Shelley, M; Mackenzie, N; Spencer, H; Kiani, H; Brennan, P A

2009-06-01

Between January 2007 and December 2008, 44 technical notes or related publications (such as letters) were published in the British Journal of Oral and Maxillofacial Surgery (BJOMS). These covered most of the remit of the specialty and ranged from operative surgical techniques to the use of digital photographs to orientate surgical specimens. However, there would seem to be very little feedback on the value of these articles in everyday practice. We reviewed these technical notes and assessed readability, the value and use of illustrations, the possible expense and/or equipment required in their use, and finally the frequency that the techniques could be used. The anonymised publications were read and scored by a minimum of two dentally qualified senior house officers, two doubly qualified specialist registrars, an SAS grade and two consultants in oral and maxillofacial surgery. The six techniques that gained the highest mean average score are briefly discussed. Although we used a relatively small number of assessors who might not be representative of the whole BJOMS readership, this study would suggest that some sort of change in the way that these technical notes are published should be considered. Options might include inviting a commentary from the reviewers who have tried the technique and also encouraging colleagues to report their experiences of these techniques in the 'letters to the editor' section.

Basic Writing Concepts for Scientists and Engineers.

ERIC Educational Resources Information Center

Mitchell, John H.

1980-01-01

Notes the differences between poetry and technical communication. Charges English teacher/humanists with confusing students about emotional writing, style, and effective technical communication. Offers five concepts that technical writing teachers can use to place "style" on a rational basis and to make students understand the true purposes of…

Bibliography--Unclassified Technical Reports, Special Reports, and Technical Notes: FY 1982.

DTIC Science & Technology

1982-11-01

in each category are listed in chronological order under seven areas: manpower management, personnel administration , organization management, education...7633). Technical reports listed that have unlimited distribution can also be obtained from the National Technical Information Service , 5285 Port Royal...simulations of manpower systems. This research exploits the technology of computer-managed large-scale data bases. PERSONNEL ADMINISTRATION The personnel

Quad Charts in the Classroom to Reinforce Technical Communication Fundamentals

ERIC Educational Resources Information Center

Ford, Julie Dyke; Wei, Tie

2015-01-01

Quad charts are a genre frequently used in scientific and technical environments, yet little prior work has evaluated their potential for reinforcing technical communication fundamentals. This article provides background information about quad charts and notes the benefits of implementing quad charts in the classroom. In particular, introducing…

"You Will": Technology, Magic, and the Cultural Contexts of Technical Communication.

ERIC Educational Resources Information Center

Kitalong, Karla Saari

2000-01-01

Provides some background on the use of magical language in technical contexts, gives examples of magical discourse in technology advertisements and newsmagazine articles, and proposes a technical communication pedagogy of media analysis. Notes that the proposed pedagogy involves students conducting diagnostic critiques of media texts and affords…

40 CFR Appendix A to Part 67 - Technical Support Document

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Technical Support Document A Appendix A to Part 67 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...—Technical Support Document Note: EPA will make copies of appendix A available from: Director, Stationary...

40 CFR Appendix A to Part 66 - Technical Support Document

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Technical Support Document A Appendix A to Part 66 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...—Technical Support Document Note: For text of appendix A see appendix A to part 67. ...

Insight into the da Vinci® Xi - technical notes for single-docking left-sided colorectal procedures.

PubMed

Ngu, James Chi-Yong; Sim, Sarah; Yusof, Sulaiman; Ng, Chee-Yung; Wong, Andrew Siang-Yih

2017-12-01

The adoption of robot-assisted laparoscopic colorectal surgery has been hampered by issues with docking, operative duration, technical difficulties in multi-quadrant access, and cost. The da Vinci® Xi has been designed to overcome some of these limitations. We describe our experience with the system and offer technical insights to its application in left-sided colorectal procedures. Our initial series of left-sided robotic colorectal procedures was evaluated. Patient demographics and operative outcomes were recorded prospectively using a predefined database. Between March 2015 and April 2016, 54 cases of robot-assisted laparoscopic left-sided colorectal procedures were successfully completed with no cases of conversion. The majority were low anterior resections for colorectal malignancies. Using the da Vinci® Xi Surgical System, multi-quadrant surgery involving dissection from the splenic flexure to the pelvis was possible without redocking. The da Vinci® Xi simplifies the docking procedure and makes single-docking feasible for multi-quadrant left-sided colorectal procedures. Copyright © 2016 John Wiley & Sons, Ltd.

Expanding the Scope of Technical Communication: Examples from the Department of Technical Communication at the University of Washington.

ERIC Educational Resources Information Center

Haselkorn, Mark P.; Sauer, Geoffrey; Turns, Jennifer; Illman, Deborah L.; Tsutsui, Michio; Plumb, Carolyn; Williams, Tom; Kolko, Beth; Spyridakis, Jan

2003-01-01

Presents eight current projects involving faculty in the University of Washington's Department of Technical Communication that illustrate the broadening of the field. Notes these projects address: the cognitive processing of visual material; Web-based education; strategic management of information; communicating science and technology in the…

Development of requirements on safety cases of machine industry products for power engineering

NASA Astrophysics Data System (ADS)

Aronson, K. E.; Brezgin, V. I.; Brodov, Yu. M.; Gorodnova, N. V.; Kultyshev, A. Yu.; Tolmachev, V. V.; Shablova, E. G.

2016-12-01

This article considers security assurance for power engineering machinery in the design and production phases. The Federal Law "On Technical Regulation" and the Customs Union Technical Regulations "On Safety of Machinery and Equipment" are analyzed in the legal, technical, and economic aspect with regard to power engineering machine industry products. From the legal standpoint, it is noted that the practical enforcement of most norms of the Law "On Technical Regulation" makes it necessary to adopt subordinate statutory instruments currently unavailable; moreover, the current level of adoption of technical regulations leaves much to be desired. The intensive integration processes observed in the Eurasian Region in recent years have made it a more pressing task to harmonize the laws of the region's countries, including their technical regulation framework. The technical aspect of analyzing the technical regulation of the Customs Union has been appraised by the IDEF0 functional modeling method. The object of research is a steam turbine plant produced at the turbine works. When developing the described model, we considered the elaboration of safety case (SC) requirements from the standpoint of the chief designer of the turbine works as the person generally responsible for the elaboration of the SC document. The economic context relies on risk analysis and appraisal methods. In their respect, these are determined by the purposes and objectives of analysis, complexity of considered objects, availability of required data, and expertise of specialists hired to conduct the analysis. The article proposes the description of all sources of hazard and scenarios of their actualization in all production phases of machinery life cycle for safety assurance purposes. The detection of risks and hazards allows forming the list of unwanted events. It describes the sources of hazard, various risk factors, conditions for their rise and development, tentative risk appraisals, and elaboration of tentative guidelines for reducing hazard and risk levels.

Shrink film patterning by craft cutter: complete plastic chips with high resolution/high-aspect ratio channel.

PubMed

Taylor, Douglas; Dyer, David; Lew, Valerie; Khine, Michelle

2010-09-21

This paper presents a rapid, ultra-low-cost approach to fabricate microfluidic devices using a polyolefin shrink film and a digital craft cutter. The shrinking process (with a 95% reduction in area) results in relatively uniform and consistent microfluidic channels with smooth surfaces, vertical sidewalls, and high aspect ratio channels with lateral resolutions well beyond the tool used to cut them. The thermal bonding of the layers results in strongly bonded devices. Complex microfluidic designs are easily designed on the fly and protein assays are also readily integrated into the device. Full device characterization including channel consistency, optical properties, and bonding strength are assessed in this technical note.

Department of Defense Human Factors Engineering Technical Advisory Group Minutes of the Meeting, (15th), Held at San Diego, California, on 5-7 November 1985

DTIC Science & Technology

1985-11-01

the group to be alert to changes in goals, noting that if the model is not sensitive to goal changes , it will lack validity. Mr. Hartzell announced...This increased emphasis on the soldier-machine interface has not been a sudden change . Instead it has been a gradual one coincident with and...point alone in affecting both design changes and operational doctrine for the system. Analysis of these data should first compare achieved

Dredging Operations Technical Support Program: Engineering Design and Environmental Assessment of Dredged Material Overflow from Hydraulically Filled Hopper Barges in Mobile Bay, Alabama

DTIC Science & Technology

1990-09-01

turbid estuarine habitats such as Mobile Bay are very tolerant of moderately high concentrations of suspended sediments and thin layers of sediment...GULF OF MEXIC BAYOU 4M 2CAE SI2LTK Fiur 3. DsrbuinoAedmnTyesi oie a fo IsphordingLT anCLmb190 PART III: DREDGING EQUIPMENT AND OPERATIONAL TECHNIQUES...increase in ambient turbidity was noted. Water samples were collected at surface, middepth, and bottom. The sampling boats proceeded across their

The Development of an Advanced Anti-Icing/Deicing Capability for U.S. Army Helicopters. Volume 1. Design Criteria and Technology Considerations

DTIC Science & Technology

1975-11-01

EFFECT OF ICING CONDITIONS ON THE ZPG-2 AIRSHIP , NACA Technical Note 4220, Washington, D. C., April 1958. 28A * jb 7 -- ALBANYI I I,- 99 { T: FLINT...replicator (Figure 45) which featurek 35-mm slide frames coated with gelatine . Momentary exposure past an open slot leaves permanent footprints (cavi- ties...in the gelatine substance (Figure 46). In order to capture a true sample, the collection efficienuj of the collector (i.e., the fraction of 139 II r

Preliminary Reports, Memoranda and Technical Notes of the Materials Research Council Summer Conference, La Jolla, California

DTIC Science & Technology

1982-07-01

are acous- 3 tic images of oxide films grown on samples with and without yttrium respectively, by exposing to moist air at 8500C for several hours...lower cutoff point for the velocity is chosen to designate acceptable product. Carbides are the only fly in the ointment ; they also 98 - 77% raise the...tended x-ray absorption fine structure spectra were measured on these films, as well as on bulk Fe and on an air- exposed film. The energy position of

Status of the NASA Balloon Program

NASA Technical Reports Server (NTRS)

Needleman, H. C.; Nock, R. S.; Bawcom, D. W.

1993-01-01

The NASA Balloon Program (BP) is examined in an overview of design philosophy, R&D activities, flight testing, and the development of a long-duration balloon for Antarctic use. The Balloon Recovery Program was developed to qualify the use of existing films and to design improved materials and seals. Balloon flights are described for studying the supernova SN1987a, and systems were developed to enhance balloon campaigns including mobile launch vehicles and tracking/data-acquisition systems. The technical approach to long-duration ballooning is reviewed which allows the use of payloads of up to 1350 kg for two to three weeks. The BP is responsible for the development of several candidate polyethylene balloon films as well as design/performance standards for candidate balloons. Specific progress is noted in reliability and in R&D with respect to optimization of structural design, resin blending, and extrusion.

Braccio di Ferro: a new haptic workstation for neuromotor rehabilitation.

PubMed

Casadio, Maura; Sanguineti, Vittorio; Morasso, Pietro G; Arrichiello, Vincenzo

2006-01-01

This technical note describes a new robotic workstation for neurological rehabilitation, shortly named Braccio di Ferro. It has been designed by having in mind the range of forces and the frequency bandwidth that characterize the interaction between a patient and a physical therapist, as well as a number of requirements that we think are essential for allowing a natural haptic interaction: back-driveability, very low friction and inertia, mechanical robustness, the possibility to operate in different planes, and an open software environment, which allows the operator to add new functionalities and design personalized rehabilitation protocols. Braccio di Ferro is an open system and, in the spirit of open source design, is intended to foster the dissemination of robot therapy. Moreover, its combination of features is not present in commercially available systems.

Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ulm, Franz-Josef

2000-03-31

OAK-B135 Monitoring the Durability Performance of Concrete in Nuclear Waste Containment. Technical Progress Report No. 3(NOTE: Part II A item 1 indicates ''PAPER'', but a report is attached electronically)

EDJJ Notes. Volume 3, Number 3

ERIC Educational Resources Information Center

Gagnon, Joe, Ed.

2004-01-01

This issue of "EDJJ Notes" contains the following articles: (1) "In the News: Suspension, Race, and Disability in Maryland" (Michael Krezmien and Peter Leone); (2) "Establishing and Maintaining Quality Education Programs in Juvenile Corrections" (Lucky Mason); (3) "Resources for Parents: The Technical Assistance…

Transvaginal laparoscopically assisted endoscopic cholecystectomy: preliminary clinical results for a series of 43 cases in China.

PubMed

Niu, Jun; Song, Wei; Yan, Ming; Fan, Wei; Niu, Weibo; Liu, Enyu; Peng, Cheng; Lin, Pengfei; Li, Peng; Khan, Abdul Qadir

2011-04-01

Transvaginal cholecystectomy has been performed successfully at several research institutions worldwide using natural orifice transluminal endoscopic surgery (NOTES) techniques. However, it is a growing new surgical concept in China. Several technical challenges hinder the safe clinical application of NOTES. This study investigated transvaginal endoscopic cholecystectomy performed with the assistance of a single umbilical trocar and achieved helpful initial clinical experience. From May 2009 to April 2010, a total of 43 transvaginal human cholecystectomies were performed. A single umbilical trocar was used for safe access and laparoscopic assistance during the operation. After the gallbladder had been removed through the vagina, the colpotomy was closed with absorbable stitches under direct vision. In addition, Student's t-test was performed for two samples to estimate the superiority of NOTES over a conventional laparoscopic cholecystectomy (LC) operation. The procedure was successfully completed for all the patients. No intra- or post-operative complications occurred. The patients recovered promptly after surgery, and all were satisfied with ideal cosmetic outcomes. The postoperative pain, hospital stay, and cost of hospitalization with NOTES were much less than with conventional LC operations. Although endoscopic instruments specifically designed for NOTES are not available, the addition of an umbilical trocar is an optimal way to allow safe performance of NOTES procedures in an easily reproducible manner. The authors' initial experience demonstrates that this hybrid technique is potentially feasible and effective for reducing postoperative pain and recovery times while improving the cosmetic results of transvaginal cholecystectomy.

Linking Bibliographic Data Bases: A Discussion of the Battelle Technical Report.

ERIC Educational Resources Information Center

Jones, C. Lee

This document establishes the context, summarizes the contents, and discusses the Battelle technical report, noting certain constraints of the study. Further steps for the linking of bibliographic databases for use by academic and public libraries are suggested. (RAA)

Women and Feminism in Technical Communication: A Qualitative Content Analysis of Journal Articles Published in 1989 through 1997.

ERIC Educational Resources Information Center

Thompson, Isabelle

1999-01-01

Identifies 40 articles about women and feminism published in five technical communication journals in a period of nine years. Notes major themes, all concerning inclusion. Concludes that although research about women and feminism has been accepted as part of the scholarly purview of technical communication, the ways in which this research has…

[Depressor anguli oris sign (DAO) in facial paresis. How to search it and release the smile (technical note)].

PubMed

Labbé, D; Bénichou, L; Iodice, A; Giot, J-P

2012-06-01

After facial paralysis recovery, it is common to note a co-contraction between depressor anguli oris (DAO) muscle and zygomatic muscles. This DAO co-contraction will "obstruct" the patient's smile. The purpose of this technical note is to show how to find the DAO sign and how to free up the smile. TECHNICAL: This co-contraction between the zygomatic muscles and DAO research is placing a finger on marionette line, asking the patient to smile: we perceive a rope under the skin corresponding to the abnormal contraction and powerful DAO. A diagnostic test with lidocaine injection into the DAO can be performed to confirm the diagnosis. The treatment of pathological DAO's contraction can be by injection of botulinum toxin in the DAO, or by surgical myectomy. In all cases, a speech therapy complete the treatment. The DAO sign is a semiological entity easy to find. His treatment releases smile without negative effect on the facial expression as the DAO is especially useful in the expression of disgust. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

Fiscal year 1977 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

White, O. L. (Compiler)

1977-01-01

This bibliography lists 78 NASA technical memoranda, notes, papers, and reports presented by Marshall Space Flight Center personnel in FY 1977. In addition, 525 papers by contractors to that facility are cited along with 129 papers cleared for presentation.

Assessing Technical Training Needs.

ERIC Educational Resources Information Center

Schwaller, Anthony E.; Slipy, Dave

1985-01-01

Describes the results of a joint project of St. Cloud State University (Minnesota) and DeZURIK Corporation (a manufacturer and distributor of industrial valves) which developed and implemented a technical training needs questionnaire for use with the company's employees. Student involvement in the process is noted. (MBR)

Towards scar-free surgery: An analysis of the increasing complexity from laparoscopic surgery to NOTES

PubMed Central

Chellali, Amine; Schwaitzberg, Steven D.; Jones, Daniel B.; Romanelli, John; Miller, Amie; Rattner, David; Roberts, Kurt E.; Cao, Caroline G.L.

2014-01-01

Background NOTES is an emerging technique for performing surgical procedures, such as cholecystectomy. Debate about its real benefit over the traditional laparoscopic technique is on-going. There have been several clinical studies comparing NOTES to conventional laparoscopic surgery. However, no work has been done to compare these techniques from a Human Factors perspective. This study presents a systematic analysis describing and comparing different existing NOTES methods to laparoscopic cholecystectomy. Methods Videos of endoscopic/laparoscopic views from fifteen live cholecystectomies were analyzed to conduct a detailed task analysis of the NOTES technique. A hierarchical task analysis of laparoscopic cholecystectomy and several hybrid transvaginal NOTES cholecystectomies was performed and validated by expert surgeons. To identify similarities and differences between these techniques, their hierarchical decomposition trees were compared. Finally, a timeline analysis was conducted to compare the steps and substeps. Results At least three variations of the NOTES technique were used for cholecystectomy. Differences between the observed techniques at the substep level of hierarchy and on the instruments being used were found. The timeline analysis showed an increase in time to perform some surgical steps and substeps in NOTES compared to laparoscopic cholecystectomy. Conclusion As pure NOTES is extremely difficult given the current state of development in instrumentation design, most surgeons utilize different hybrid methods – combination of endoscopic and laparoscopic instruments/optics. Results of our hierarchical task analysis yielded an identification of three different hybrid methods to perform cholecystectomy with significant variability amongst them. The varying degrees to which laparoscopic instruments are utilized to assist in NOTES methods appear to introduce different technical issues and additional tasks leading to an increase in the surgical time. The NOTES continuum of invasiveness is proposed here as a classification scheme for these methods, which was used to construct a clear roadmap for training and technology development. PMID:24902811

Prospects for the development of coal-steam plants in Russia

NASA Astrophysics Data System (ADS)

Tumanovskii, A. G.

2017-06-01

Evaluation of the technical state of the modern coal-fired power plants and quality of coal consumed by Russian thermal power plants (TPP) is provided. Measures aimed at improving the economic and environmental performance of operating 150-800 MW coal power units are considered. Ways of efficient use of technical methods of NO x control and electrostatic precipitators' upgrade for improving the efficiency of ash trapping are summarized. Examples of turbine and boiler equipment efficiency upgrading through its deep modernization are presented. The necessity of the development and introduction of new technologies in the coal-fired power industry is shown. Basic technical requirements for a 660-800 MW power unit with the steam conditions of 28 MPa, 600/600°C are listed. Design solutions taking into account features of Russian coal combustion are considered. A field of application of circulating fluidized bed (CFB) boilers and their effectiveness are indicated. The results of development of a new generation coal-fired TPP, including a steam turbine with an increased efficiency of the compartments and disengaging clutch, an elevated steam conditions boiler, and a highly efficient NO x /SO2 and ash particles emission control system are provided. In this case, the resulting ash and slag are not to be sent to the ash dumps and are to be used to a maximum advantage. Technical solutions to improve the efficiency of coal gasification combined cycle plants (CCP) are considered. A trial plant based on a 16 MW gas turbine plant (GTP) and an air-blown gasifier is designed as a prototype of a high-power CCP. The necessity of a state-supported technical reequipment and development program of operating coal-fired power units, as well as putting into production of new generation coal-fired power plants, is noted.

Breckinridge Project, initial effort. Report XI, Volume V. Critical review of the design basis. [Critical review

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1982-01-01

Report XI, Technical Audit, is a compendium of research material used during the Initial Effort in making engineering comparisons and decisions. Volumes 4 and 5 of Report XI present those studies which provide a Critical Review of the Design Basis. The Critical Review Report, prepared by Intercontinental Econergy Associates, Inc., summarizes findings from an extensive review of the data base for the H-Coal process design. Volume 4 presents this review and assessment, and includes supporting material; specifically, Design Data Tabulation (Appendix A), Process Flow Sheets (Appendix B), and References (Appendix C). Volume 5 is a continuation of the references ofmore » Appendix C. Studies of a proprietary nature are noted and referenced, but are not included in these volumes. They are included in the Limited Access versions of these reports and may be reviewed by properly cleared personnel in the offices of Ashland Synthetic Fuels, Inc.« less

Sandia Advanced MEMS Design Tools v. 3.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yarberry, Victor R.; Allen, James J.; Lantz, Jeffrey W.

This is a major revision to the Sandia Advanced MEMS Design Tools. It replaces all previous versions. New features in this version: Revised to support AutoCAD 2014 and 2015 This CD contains an integrated set of electronic files that: a) Describe the SUMMiT V fabrication process b) Provide enabling educational information (including pictures, videos, technical information) c) Facilitate the process of designing MEMS with the SUMMiT process (prototype file, Design Rule Checker, Standard Parts Library) d) Facilitate the process of having MEMS fabricated at Sandia National Laboratories e) Facilitate the process of having post-fabrication services performed. While there exists somemore » files on the CD that are used in conjunction with software package AutoCAD, these files are not intended for use independent of the CD. Note that the customer must purchase his/her own copy of AutoCAD to use with these files.« less

Compact self-powered synchronous energy extraction circuit design with enhanced performance

NASA Astrophysics Data System (ADS)

Liu, Weiqun; Zhao, Caiyou; Badel, Adrien; Formosa, Fabien; Zhu, Qiao; Hu, Guangdi

2018-04-01

Synchronous switching circuit is viewed as an effective solution of enhancing the generator’s performance and providing better adaptability for load variations. A critical issue for these synchronous switching circuits is the self-powered realization. In contrast with other methods, the electronic breaker possesses the advantage of simplicity and reliability. However, beside the energy consumption of the electronic breakers, the parasitic capacitance decreases the available piezoelectric voltage. In this technical note, a new compact design of the self-powered switching circuit using electronic breaker is proposed. The envelope diodes are excluded and only a single envelope capacitor is used. The parasitic capacitance is reduced to half with boosted performance while the components are reduced with cost saved.

Initial Morphologic Evolution of Perdido Key Berm Nourishment, Florida

DTIC Science & Technology

2013-08-01

December 18, 2011). METHODOLOGY : This study is based on beach-nearshore profiles, sediment samples, and wave data collected during the first 6 months...preparation). Vicksburg, MS: US Army Engineering Reserach and Development Center. NOTE: The contents of this technical note are not to be used for

Description of the NCAR Community Climate Model (CCM3). Technical note

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kiehl, J.T.; Hack, J.J.; Bonan, G.B.

This repor presents the details of the governing equations, physical parameterizations, and numerical algorithms defining the version of the NCAR Community Climate Model designated CCM3. The material provides an overview of the major model components, and the way in which they interact as the numerical integration proceeds. This version of the CCM incorporates significant improvements to the physic package, new capabilities such as the incorporation of a slab ocean component, and a number of enhancements to the implementation (e.g., the ability to integrate the model on parallel distributed-memory computational platforms).

An experimental microcomputer controlled system for synchronized pulsating anti-gravity suit.

PubMed

Moore, T W; Foley, J; Reddy, B R; Kepics, F; Jaron, D

1987-07-01

An experimental system to deliver synchronized external pressure pulsations to the lower body is described in this technical note. The system is designed using a microcomputer with a real time interface and an electro-pneumatic subsystem capable of delivering pressure pulses to a modified anti-G suit at a fast rate. It is versatile, containing many options for synchronizing, phasing and sequencing of the pressure pulsations and controlling the pressure level in the suit bladders. Details of its software and hardware are described along with the results of initial testing in a Dynamic Flight Simulator on human volunteers.

Kennedy Space Center (KSC) Launch Complex 39 (LC-39) Gaseous Hydrogen (GH2) Vent Arm Behavior Prediction Model Review Technical Assessment Report

NASA Technical Reports Server (NTRS)

Wilson, Timmy R.; Beech, Geoffrey; Johnston, Ian

2009-01-01

The NESC Assessment Team reviewed a computer simulation of the LC-39 External Tank (ET) GH2 Vent Umbilical system developed by United Space Alliance (USA) for the Space Shuttle Program (SSP) and designated KSC Analytical Tool ID 451 (KSC AT-451). The team verified that the vent arm kinematics were correctly modeled, but noted that there were relevant system sensitivities. Also, the structural stiffness used in the math model varied somewhat from the analytic calculations. Results of the NESC assessment were communicated to the model developers.

Technical communication: Notes toward defining discipline

NASA Technical Reports Server (NTRS)

Rubens, P. M.

1981-01-01

In the field of technical communication, definitions posited in virtually any major text violate every major rule of definitions. The most popular method for defining the field is to state that technical writing is any writing that supports technology or technological activities. There is a need for a nice yardstick for measuring what "technology" is. Some ways in which the field can be defined in a tightly structured empirical way and some implications of technical communication for a humanistic education in a technological age are suggested.

NLC Injector Systems

Science.gov Websites

text only NLC Home Page NLC Technical SLAC Sources Damping Rings S & L Band Linacs Engineering ; Presentations Injector System Documentation Talks and Presentations The NLC ZDR ISG Reports Sources Lasers Photocathodes Electron Source Laser Maintenance Facility Positron Source Sources Technical Notes Sources Meeting

The Social Perspective and Pedagogy in Technical Communication.

ERIC Educational Resources Information Center

Thralls, Charlotte; Blyler, Nancy Roundy

1993-01-01

Notes that as teachers integrate social theory into the technical communication classroom, they interpret the connection between writing and culture in different ways. Describes four social pedagogies of writing--the social constructionist, the ideologic, the social cognitive, and the paralogic hermeneutic--distinguishing them by their pedagogic…

Multi-agent system as a new approach to effective chronic heart failure management: key considerations.

PubMed

Mohammadzadeh, Niloofar; Safdari, Reza; Rahimi, Azin

2013-09-01

Given the importance of the follow-up of chronic heart failure (CHF) patients to reduce common causes of re-admission and deterioration of their status that lead to imposing spiritual and physical costs on patients and society, modern technology tools should be used to the best advantage. The aim of this article is to explain key points which should be considered in designing an appropriate multi-agent system to improve CHF management. In this literature review articles were searched with keywords like multi-agent system, heart failure, chronic disease management in Science Direct, Google Scholar and PubMed databases without regard to the year of publications. Agents are an innovation in the field of artificial intelligence. Because agents are capable of solving complex and dynamic health problems, to take full advantage of e-Health, the healthcare system must take steps to make use of this technology. Key factors in CHF management through a multi-agent system approach must be considered such as organization, confidentiality in general aspects and design and architecture points in specific aspects. Note that use of agent systems only with a technical view is associated with many problems. Hence, in delivering healthcare to CHF patients, considering social and human aspects is essential. It is obvious that identifying and resolving technical and non-technical challenges is vital in the successful implementation of this technology.

Multi-Agent System as a New Approach to Effective Chronic Heart Failure Management: Key Considerations

PubMed Central

Mohammadzadeh, Niloofar; Rahimi, Azin

2013-01-01

Objectives Given the importance of the follow-up of chronic heart failure (CHF) patients to reduce common causes of re-admission and deterioration of their status that lead to imposing spiritual and physical costs on patients and society, modern technology tools should be used to the best advantage. The aim of this article is to explain key points which should be considered in designing an appropriate multi-agent system to improve CHF management. Methods In this literature review articles were searched with keywords like multi-agent system, heart failure, chronic disease management in Science Direct, Google Scholar and PubMed databases without regard to the year of publications. Results Agents are an innovation in the field of artificial intelligence. Because agents are capable of solving complex and dynamic health problems, to take full advantage of e-Health, the healthcare system must take steps to make use of this technology. Key factors in CHF management through a multi-agent system approach must be considered such as organization, confidentiality in general aspects and design and architecture points in specific aspects. Conclusions Note that use of agent systems only with a technical view is associated with many problems. Hence, in delivering healthcare to CHF patients, considering social and human aspects is essential. It is obvious that identifying and resolving technical and non-technical challenges is vital in the successful implementation of this technology. PMID:24195010

Survivability Enhancements for Military Communications Satellites

DTIC Science & Technology

1990-01-01

Communications Agency, Jan 1984. Townley , Ralph K., David W. Brown, Martin 0. Bernet, and Bernard L. Pankowski. "Selected Issues in DCS Integration...K. Townley , David W. Brown, Martin 0. Bernet, and Bernard L. Pankowski, "Selected Issues in DCS Technical Integration," Technical paper prepared by...34 Technical Note 11-82. Defense Communications Agency, Jan 1984. Townley , Ralph K., David W. Brown, Martin 0. Bernet, and Bernard L. Pankowski. "Selected

Ultrasonic Imaging and Automated Flaw Detection System

DTIC Science & Technology

1986-03-01

176 007 !----------------------------- DS 176 500 ------------------------- ! STEPPER MOOC TOR MAP 176 ~ ~ IGR 509------------------- I I28 * 4W...ATTN: SMCAR-CCB-R 2 -R (ELLEN FOGARTY) 1 -RA 1 -RM 1 -RP I -RT TECHNICAL LIBRARY 5 ATTN: SMCAR-CCB-TL TECHNICAL PUBLICATIONS & EDITING UNIT 2 ATTN...WEAPONS CTR ATTN: TECHNICAL LIBRARY CODE X212 DAIILGREN, VA 22448 ’.1 -_ NOTE: PLEASE NOTIFY COMMANDER, ARMAMENT RESEARCH AND DEVELOPMENT CENTER, US

Reference Reactor Module for the Affordable Fission Surface Power System

NASA Astrophysics Data System (ADS)

Poston, David I.; Kapernick, Richard J.; Dixon, David D.; Amiri, Benjamin W.; Marcille, Thomas F.

2008-01-01

Surface fission power systems on the Moon and Mars may provide the first US application of fission reactor technology in space since 1965. The requirements of many surface power applications allow the consideration of systems with much less development risk than most other space reactor applications, because of modest power (10s of kWe) and no driving need for minimal mass (allowing temperatures <1000 K). The Affordable Fission Surface Power System (AFSPS) study was completed by NASA/DOE to determine the cost of a modest performance, low-technical risk surface power system. This paper describes the reference AFSPS reactor module concept, which is designed to provide a net power of 40 kWe for 8 years on the lunar surface; note, the system has been designed with technologies that are fully compatible with a Martian surface application. The reactor concept uses stainless-steel based, UO2-fueled, liquid metal-cooled fission reactor coupled to free-piston Stirling converters. The reactor shielding approach utilizes both in-situ and launched shielding to keep the dose to astronauts much lower than the natural background radiation on the lunar surface. One of the important ``affordability'' attributes is that the concept has been designed to minimize both the technical and programmatic safety risk.

Technical Secondary Education in Togo and Cameroon--Research Note.

ERIC Educational Resources Information Center

Paul, Jean-Jacques

1990-01-01

Evaluates technical secondary education in Togo and Cameroon from the market perspective, using tracer study data. To help overcome difficulties in finding employment after training, many individuals secure work in the low-paying informal sector. One solution is to stimulate and enhance the role of informal training through apprentice training…

Teaching Technical Report Writing

ERIC Educational Resources Information Center

De Pasquale, Joseph A.

1977-01-01

A high school electronics teacher describes the integration of technical report writing in the electronics program for trade and industrial students. He notes that the report writing rather than just recording data seemed to improve student laboratory experience but further improvements in the program are needed. A sample lab report is included.…

Undocumented College Students, Taxation, and Financial Aid: A Technical Note

ERIC Educational Resources Information Center

Olivas, Michael A.

2009-01-01

A surprising amount of litigation and legislation has erupted over undocumented college students. Victims at the federal level are the DREAM Act and immigration reform. Financial aid raises technical issues for undocumented college applicants and for the citizen children of undocumented parents. Generally, the undocumented are ineligible for…

Development and Technical Validation of the Mobile Based Assistive Listening System: A Smartphone-Based Remote Microphone.

PubMed

Lopez, Esteban Alejandro; Costa, Orozimbo Alves; Ferrari, Deborah Viviane

2016-10-01

The purpose of this research note is to describe the development and technical validation of the Mobile Based Assistive Listening System (MoBALS), a free-of-charge smartphone-based remote microphone application. MoBALS Version 1.0 was developed for Android (Version 2.1 or higher) and was coded with Java using Eclipse Indigo with the Android Software Development Kit. A Wi-Fi router with background traffic and 2 affordable smartphones were used for debugging and technical validation comprising, among other things, multicasting capability, data packet loss, and battery consumption. MoBALS requires at least 2 smartphones connected to the same Wi-Fi router for signal transmission and reception. Subscriber identity module cards or Internet connections are not needed. MoBALS can be used alone or connected to a hearing aid or cochlear implant via direct audio input. Maximum data packet loss was 99.28%, and minimum battery life was 5 hr. Other relevant design specifications and their implementation are described. MoBALS performed as a remote microphone with enhanced accessibility features and avoids overhead expenses by using already-available and affordable technology. The further development and technical revalidation of MoBALS will be followed by clinical evaluation with persons with hearing impairment.

An assessment of scientific and technical aspects of closed investigations of canine forensics DNA – case series from the University of California, Davis, USA

PubMed Central

Scharnhorst, Günther; Kanthaswamy, Sree

2011-01-01

Aim To describe and assess the scientific and technical aspects of animal forensic testing at the University of California, Davis. The findings and recommendations contained in this report are designed to assess the past, evaluate the present, and recommend reforms that will assist the animal forensic science community in providing the best possible services that comply with court standards and bear judicial scrutiny. Methods A batch of 32 closed files of domestic dog DNA cases processed at the University of California, Davis, between August 2003 and July 2005 were reviewed in this study. The case files comprised copies of all original paperwork, copies of the cover letter or final report, laboratory notes, notes on analyses, submission forms, internal chains of custody, printed images and photocopies of evidence, as well as the administrative and technical reviews of those cases. Results While the fundamental aspects of animal DNA testing may be reliable and acceptable, the scientific basis for forensic testing animal DNA needs to be improved substantially. In addition to a lack of standardized and validated genetic testing protocols, improvements are needed in a wide range of topics including quality assurance and quality control measures, sample handling, evidence testing, statistical analysis, and reporting. Conclusion This review implies that although a standardized panel of short tandem repeat and mitochondrial DNA markers and publicly accessible genetic databases for canine forensic DNA analysis are already available, the persistent lack of supporting resources, including standardized quality assurance and quality control programs, still plagues the animal forensic community. This report focuses on closed cases from the period 2003-2005, but extends its scope more widely to include other animal DNA forensic testing services. PMID:21674824

An assessment of scientific and technical aspects of closed investigations of canine forensics DNA--case series from the University of California, Davis, USA.

PubMed

Scharnhorst, Günther; Kanthaswamy, Sree

2011-06-01

To describe and assess the scientific and technical aspects of animal forensic testing at the University of California, Davis. The findings and recommendations contained in this report are designed to assess the past, evaluate the present, and recommend reforms that will assist the animal forensic science community in providing the best possible services that comply with court standards and bear judicial scrutiny. A batch of 32 closed files of domestic dog DNA cases processed at the University of California, Davis, between August 2003 and July 2005 were reviewed in this study. The case files comprised copies of all original paperwork, copies of the cover letter or final report, laboratory notes, notes on analyses, submission forms, internal chains of custody, printed images and photocopies of evidence, as well as the administrative and technical reviews of those cases. While the fundamental aspects of animal DNA testing may be reliable and acceptable, the scientific basis for forensic testing animal DNA needs to be improved substantially. In addition to a lack of standardized and validated genetic testing protocols, improvements are needed in a wide range of topics including quality assurance and quality control measures, sample handling, evidence testing, statistical analysis, and reporting. This review implies that although a standardized panel of short tandem repeat and mitochondrial DNA markers and publicly accessible genetic databases for canine forensic DNA analysis are already available, the persistent lack of supporting resources, including standardized quality assurance and quality control programs, still plagues the animal forensic community. This report focuses on closed cases from the period 2003-2005, but extends its scope more widely to include other animal DNA forensic testing services.

Technical Note: Computer-Manufactured Inserts for Prosthetic Sockets

PubMed Central

Sanders, Joan E.; McLean, Jake B.; Cagle, John C.; Gardner, David W.; Allyn, Katheryn J.

2016-01-01

The objective of this research was to use computer-aided design software and a tabletop 3-D additive manufacturing system to design and fabricate custom plastic inserts for trans-tibial prosthesis users. Shape quality of inserts was tested right after they were inserted into participant’s test sockets and again after four weeks of wear. Inserts remained properly positioned and intact throughout testing. Right after insertion the inserts caused the socket to be slightly under-sized, by a mean of 0.11 mm, approximately 55% of the thickness of a nylon sheath. After four weeks of wear the under-sizing was less, averaging 0.03 mm, approximately 15% of the thickness of a nylon sheath. Thus the inserts settled into the sockets over time. If existing prosthetic design software packages were enhanced to conduct insert design and to automatically generate fabrication files for manufacturing, then computer manufactured inserts may offer advantages over traditional methods in terms of speed of fabrication, ease of design, modification, and record keeping. PMID:27212209

Further Developments in the Communication Link and Error Analysis (CLEAN) Simulator

NASA Technical Reports Server (NTRS)

Ebel, William J.; Ingels, Frank M.

1995-01-01

During the period 1 July 1993 - 30 June 1994, significant developments to the Communication Link and Error ANalysis (CLEAN) simulator were completed. Many of these were reported in the Semi-Annual report dated December 1993 which has been included in this report in Appendix A. Since December 1993, a number of additional modules have been added involving Unit-Memory Convolutional codes (UMC). These are: (1) Unit-Memory Convolutional Encoder module (UMCEncd); (2) Hard decision Unit-Memory Convolutional Decoder using the Viterbi decoding algorithm (VitUMC); and (3) a number of utility modules designed to investigate the performance of LTMC's such as LTMC column distance function (UMCdc), UMC free distance function (UMCdfree), UMC row distance function (UMCdr), and UMC Transformation (UMCTrans). The study of UMC's was driven, in part, by the desire to investigate high-rate convolutional codes which are better suited as inner codes for a concatenated coding scheme. A number of high-rate LTMC's were found which are good candidates for inner codes. Besides the further developments of the simulation, a study was performed to construct a table of the best known Unit-Memory Convolutional codes. Finally, a preliminary study of the usefulness of the Periodic Convolutional Interleaver (PCI) was completed and documented in a Technical note dated March 17, 1994. This technical note has also been included in this final report.

NCEL (Naval Civil Engineering Laboratory) Quarterly Abstracts of Technical Documents, 1 April to 30 June 1987.

DTIC Science & Technology

1987-06-30

release; distribution unlimited. 87 8 3075 TABLE OF CONTENTS page TECHNICAL NOTES N-1764 Validation of Nitronic 33 in Reinforced and Prestressed...TECHNICAL WES K- 1764 Validation of Nitrovic 33 In Reeinforced and Prestressed Concrete, Apr 1987, James F. Jenkins (public release) Nitronic 33...prestressing strand are not acceptable. Before Nitronic 33 stainless steel prestressed concrete waterfront structures were constructed, it was necessary to

76 FR 44534 - Approval and Promulgation of Air Quality Implementation Plans; Tennessee; Regional Haze State...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-26

... EPA cannot read your comment due to technical difficulties and cannot contact you for clarification... on the Tennessee Regional Haze SIP. As noted in the CSAPR, EPA has not conducted any technical analysis to determine whether compliance with the CSAPR would satisfy Regional Haze Best Available Retrofit...

A Simulation of DNA Sequencing Utilizing 3M Post-It[R] Notes

ERIC Educational Resources Information Center

Christensen, Doug

2009-01-01

An inexpensive and equipment free approach to teaching the technical aspects of DNA sequencing. The activity described requires an instructor with a familiarity of DNA sequencing technology but provides a straight forward method of teaching the technical aspects of sequencing in the absence of expensive sequencing equipment. The final sequence…

Technical Education as a Tool for Ensuring Sustainable Development: A Case of India

ERIC Educational Resources Information Center

Sharma, Gagan Deep; Uppal, Raminder Singh; Mahendru, Mandeep

2016-01-01

This paper notes that education needs to essentially lead to sustainable development serving two-fold purpose--eradicating the problems of unemployment and poverty; and ensuring equitable distribution of wealth while ensuring the right understanding leading to a peaceful, prosperous and developed world. In its current state, technical education…

Technical Notes on the Multifactor Method of Elementary School Closing.

ERIC Educational Resources Information Center

Puleo, Vincent T.

This report provides preliminary technical information on a method for analyzing the factors involved in the closing of elementary schools. Included is a presentation of data and a brief discussion bearing on descriptive statistics, reliability, and validity. An intercorrelation matrix is also examined. The method employs 9 factors that have a…

Assessing Technical Writing in Institutional Contexts: Using Outcomes-Based Assessment for Programmatic Thinking.

ERIC Educational Resources Information Center

Carter, Michael; Anson, Chris M.; Miller, Carolyn R.

2003-01-01

Notes that technical writing instruction often operates in isolation from other components of students' communication education. Argues for altering this isolation by moving writing instruction to a place of increased programmatic perspective, which may be attained through a means of assessment based on educational outcomes. Discusses two models…

WOOD PRODUCTS IN THE WASTE STREAM: CHARACTERIZATION AND COMBUSTION EMISSIONS - VOLUME 1. TECHNICAL REPORT

EPA Science Inventory

The report gives results of a study of technical, public policy, and regulatory issues that affect the processing and combustion of waste wood for fuel. (NOTE: Waste wood is wood that is separated from a solid-waste stream, processed into a uniform-sized product, and reused for o...

Abstracts of BESRL Research Publications, FY 1969.

ERIC Educational Resources Information Center

Brown, Emma E.

Publications abstracted include Technical Research Reports 1156 and 1157, Technical Research Notes 199 through 210, Research Studies 68-4 through 68-6 and 69-1 through 6910, and Research Memorandums 68-8 through 68-13. Included are descriptions of 19 Work Units covering activities reported in the 33 abstracted publications, a list of regular…

Scientific and Technical Information Output of the Langley Research Center, for calendar year 1976

NASA Technical Reports Server (NTRS)

1976-01-01

Documents listed include NASA Technical Reports, Technical Notes, Technical Memorandums, Special Publications, Contractor Reports, journal articles, and technical presentations made at Society meetings. NASA formal reports listed are those that were mailed and distributed to the ultimate user. The material presented here is listed first by Division and then under the following headings: (a) Formal Reports, (b) Contractor Reports, (c) Articles and Meeting Presentations, and (d) High Number Technical Memorandums (High TMX's). Under each heading, the material cited authors in alphabetical order. If a report has more than one author and these authors are from different Divisions, the report is listed only once, under the senior author's name.

[International bibliographic databases--Current Contents on disk and in FTP format (Internet): presentation and guide].

PubMed

Bloch-Mouillet, E

1999-01-01

This paper aims to provide technical and practical advice about finding references using Current Contents on disk (Macintosh or PC) or via the Internet (FTP). Seven editions are published each week. They are all organized in the same way and have the same search engine. The Life Sciences edition, extensively used in medical research, is presented here in detail, as an example. This methodological note explains, in French, how to use this reference database. It is designed to be a practical guide for browsing and searching the database, and particularly for creating search profiles adapted to the needs of researchers.

Active Remote Sensing of Natural Resources: Course Notes. Science Series No. 5. Final Technical Report.

ERIC Educational Resources Information Center

Maxwell, Eugene L.

Presented is a portion of a research project which developed materials for teaching remote sensing of natural resources on an interdisciplinary basis at the graduate level. This volume contains notes developed for a course in active remote sensing. It is concerned with those methods or systems which generate the electromagnetic energy…

The Effect of Note-Taking on University Students' Listening Comprehension of Lectures

ERIC Educational Resources Information Center

Kiliçkaya, Ferit; Çokal Karadas, Derya

2009-01-01

The study investigated the effect of note-taking on comprehension of lectures by 44 undergraduate EFL students who are in the first year of their undergraduate level in the Department of Foreign Language Education in Middle East Technical University. The participants were divided into two groups, namely experimental and control groups. The…

Teaching Notes

NASA Astrophysics Data System (ADS)

2001-03-01

If you would like to contribute a teaching note for any of these sections please contact ped@iop.org. Contents: PHYSICS ON A SHOESTRING: Demonstrating resolution Magnetic tea patterns LET'S INVESTIGATE: Conducting foam TECHNICAL TRIMMINGS: Polarimeter Old experiments on air-tracks gain new fans MY WAY: Newton's laws ON THE MAP: The International School of Lusaka CURIOSITY: Inflation theory PHYSICS ON A SHOESTRING

Technical note: The calibration of {sup 90}Y-labeled SIR-Spheresusing a nondestructive spectroscopic assay

DOE Office of Scientific and Technical Information (OSTI.GOV)

Selwyn, R.; Micka, J.; DeWerd, L.

2008-04-15

{sup 90}Y-labeled SIR-Spheres are currently used to treat patients with hepatic metastases secondary to colorectal adenocarcinoma. In general, the prescribed activity is based on empirical data collected during clinical trials. The activity of the source vial is labeled by the manufacturer as 3.0 GBq{+-}10% and is not independently verified by the end user. This technical note shows that the results of a nondestructive spectroscopic assay of a SIR-Spheressample was 26% higher than the activity stated by the manufacturer. This difference should not impact the current empirical prescription method but may be problematic for patient-specific dosimetry applications, such as image-based dosimetry.

Energygrams: Brief descriptions of energy technology

NASA Astrophysics Data System (ADS)

Simpson, W. F., Jr.

This compilation of technical notes (called Energygrams) is published by the Technical Information Center. Energygrams are usually one-page illustrated bulletins describing DOE technology or data and telling how to obtain the technical reports or other material on which they are based. Frequently a personal contact is given who can provide program information in addition to the data found in the reports. The compilation is organized by subject categories, and, within each category, Energygrams are presented alphabetically by Energygram title.

Graphic Novels: A New Stress Mitigation Tool for Military Training: Developing Content for Hard-to-Reach Audiences.

PubMed

Hourani, Laurel; Lambert, Shari; Peeler, Russ; Lane, Becky; Borst, Carrie

2017-05-01

This article describes the development of two graphic novels as a new approach to mental health communication and coping strategies for the Navy and Marine Corps. The novels are intended to capture the attention of the younger target audience and provide vital teaching messages to better prepare personnel for deployment to combat zones. The novels were developed based on embedding the principles of combat and operational stress control (COSC) into realistic and relatable characters, stories, and images. Approaches used for development included (a) basing storylines on real-life service members and the situations they face in combat and their personal lives; (b) partnering with COSC experts to embed teaching points; (c) ensuring technical accuracy through research and target audience reviews of the storyboard and artwork; (d) developing characters that are representative of the target audience, with varied jobs, ages, backgrounds, and professional concerns; and (e) designing artwork in a manner sensitive to training objectives and the psychological effects on readers. Because technical accuracy, realism, and sensitivity were noted as essential components of an effective graphic novel tool, focus-group research and review of author drafts by the target audience and technical experts are strongly recommended.

Formative questioning in computer learning environments: a course for pre-service mathematics teachers

NASA Astrophysics Data System (ADS)

Akkoç, Hatice

2015-11-01

This paper focuses on a specific aspect of formative assessment, namely questioning. Given that computers have gained widespread use in learning and teaching, specific attention should be made when organizing formative assessment in computer learning environments (CLEs). A course including various workshops was designed to develop knowledge and skills of questioning in CLEs. This study investigates how pre-service mathematics teachers used formative questioning with technological tools such as Geogebra and Graphic Calculus software. Participants are 35 pre-service mathematics teachers. To analyse formative questioning, two types of questions are investigated: mathematical questions and technical questions. Data were collected through lesson plans, teaching notes, interviews and observations. Descriptive statistics of the number of questions in the lesson plans before and after the workshops are presented. Examples of two types of questions are discussed using the theoretical framework. One pre-service teacher was selected and a deeper analysis of the way he used questioning during his three lessons was also investigated. The findings indicated an improvement in using technical questions for formative purposes and that the course provided a guideline in planning and using mathematical and technical questions in CLEs.

The Impact of Gender on Interest in Science Topics and the Choice of Scientific and Technical Vocations

ERIC Educational Resources Information Center

Buccheri, Grazia; Gurber, Nadja Abt; Bruhwiler, Christian

2011-01-01

Many countries belonging to the Organisation for Economic Co-operation and Development (OECD) note a shortage of highly qualified scientific-technical personnel, whereas demand for such employees is growing. Therefore, how to motivate (female) high performers in science or mathematics to pursue scientific careers is of special interest. The sample…

76 FR 59014 - Standard for the Flammability of Mattresses and Mattress Pads; Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-23

... in 1972 under the authority of the Flammable Fabrics Act (``FFA''), 15 U.S.C. 1191 et seq. When the... NIST Technical Note 1627; and Non-``Fire-Safe Cigarette'' (FSC) The first three descriptors are... the risk of the occurrence of fire leading to death, injury, or significant property damage; (2) is...

Credit with Education and Title II Programs. Technical Note. Food and Nutrition Technical Assistance.

ERIC Educational Resources Information Center

Reid, Helen

"Credit with Education" is a way to provide self-financing microfinance (or small-scale banking) to women, primarily in very poor rural areas, while at the same time providing education for business and family survival. Within the village banking environment, attempts to integrate education with village bank meetings have fallen into two…

Notes from Underground: Technical Writing and the Hermetic Tradition in Agricola's "De Re Metallica."

ERIC Educational Resources Information Center

Longo, Bernadette

The roots of technical writing are deeply planted in the field of mining engineering, with its emphasis on economics, value, and social stability. In the mid-16th century, Georgius Agricola published "De Re Metallica," a compilation of knowledge about mining and metallurgy. Agricola sought to explain the reasoning behind some of the…

The Professional Educator: Notes from New York City

ERIC Educational Resources Information Center

Mulgrew, Michael

2014-01-01

In New York City, as in many places across the country, there is much discussion about strengthening career and technical education (CTE). New York City's approach to Career and Technical Education (CTE) is held up as a model for getting this type of education right. A recent conference highlighted six schools that represented only a fraction of…

Necessity of creating digital tools to ensure efficiency of technical means

NASA Astrophysics Data System (ADS)

Rakov, V. I.; Zakharova, O. V.

2018-05-01

The authors estimated the problems of functioning of technical objects. The article notes that the increasing complexity of automation systems may lead to an increase of the redundant resource in proportion to the number of components and relationships in the system, and to the need of the redundant resource constant change that can make implementation of traditional structures with redundancy unnecessarily costly (Standby System, Fault Tolerance, High Availability). It proposes the idea of creating digital tools to ensure efficiency of technical facilities.

Technical Options for Energy Conservation in Buildings. National Conference of States on Building Codes and Standards and National Bureau of Standards Joint Emergency Workshop on Energy Conservation in Buildings. (Washington, D.C., June 19, 1973) NBS Technical Note 789.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC. Inst. for Applied Technology.

The purpose of this report is to provide reference material on the technical options for energy conservation in buildings. Actions pertinent to existing buildings and new buildings are considered separately. Regarding existing buildings, principal topics include summer cooling, winter heating, and other energy-related features such as insulation,…

Bibliography of NASA published reports on general aviation, 1975 to 1981

NASA Technical Reports Server (NTRS)

1981-01-01

This bibliography lists 478 documents which relate to all heavier-than-air fixed wing aircraft exclusive of military types and those used for commercial air transport. An exception is the inclusion of commuter transport aircraft types within the general aviation category. NASA publications included in this bibliography are: conference publications (CP), reference publications (RP), technical memorandums (TM, TMX), technical notes (TN), technical papers (TP), and contractor reports (CR). In addition, papers and articles on NASA general aviation programs published by technical societies (AIAA, SAE, etc.) are included, as well as those listed in NASA's Scientific and Technical Aerospace Reports (STAR) Journal. Author and subject indexes are also provided to facilitate use of the bibliography.

Prevention of neurological injuries during mandibular third molar surgery: technical notes

PubMed Central

La Monaca, Gerardo; Vozza, Iole; Giardino, Rita; Annibali, Susanna; Pranno, Nicola; Cristalli, Maria Paola

2017-01-01

Summary Surgery to the mandibular third molar is common, and injuries to the inferior alveolar nerve and the lingual nerve are well-recognized complications of this procedure. The aim of these technical notes is to describe operative measures for reducing neurological complications during mandibular third molar surgery. The following procedure should be used to prevent damage to the inferior alveolar nerve: a well-designed mucoperiosteal flap, to obtain appropriate access to the surgical area; a conservative ostectomy on the distal and distal-lingual side; tooth sectioning, to facilitate its removal by decreasing the retention zones; tooth dislocation in the path of withdrawal imposed by the curvature of the root apex; and careful socket debridement, when the roots of the extracted tooth are in intimate contact with the mandibular canal. To prevent injury to the lingual nerve, it is important (I) to assess the integrity of the mandibular inner cortex and exclude the presence of fenestration, which could cause the dislocation of the tooth or its fragment into the sublingual or submandibular space; (II) to avoid inappropriate or excessive dislocation proceedings, in order to prevent lingual cortex fracture; (III) to perform horizontal mesial-distal crown sectioning of the lingually inclined tooth; (IV) to protect the lingual flap with a retractor showing the cortical ridge; and (V) to pass the suture not too apically and from the inner side in a buccal-lingual direction in the retromolar area. PMID:29299188

1. On note taking.

PubMed

Plaut, Alfred B J

2005-02-01

In this paper the author explores the theoretical and technical issues relating to taking notes of analytic sessions, using an introspective approach. The paper discusses the lack of a consistent approach to note taking amongst analysts and sets out to demonstrate that systematic note taking can be helpful to the analyst. The author describes his discovery that an initial phase where as much data was recorded as possible did not prove to be reliably helpful in clinical work and initially actively interfered with recall in subsequent sessions. The impact of the nature of the analytic session itself and the focus of the analyst's interest on recall is discussed. The author then describes how he modified his note taking technique to classify information from sessions into four categories which enabled the analyst to select which information to record in notes. The characteristics of memory and its constructive nature are discussed in relation to the problems that arise in making accurate notes of analytic sessions.

Merging Foreign and Domestic Information Policy Goals: The U.S. Government's Office of Technical Services (1946-1950).

ERIC Educational Resources Information Center

Stewart, Robert K.

This paper examines the institutional history of the United States government's efforts from 1946 to 1950 to gather, rationalize, and communicate to private industry, in the creation of the Office of Technical Services (OTS), the wealth of information that had been generated by scientists during the Second World War. Noting that U.S. information…

[White House Conference on Aging, 1981. Research in Aging. Report and Executive Summary of the Technical Committee.

ERIC Educational Resources Information Center

Birren, James E.; And Others

This Technical Committee Report provides an overview and historical sketch of research in aging and proposes a need for new knowledge. An examination of key issues notes the difficulty in assigning priority to research topics, and identifies emerging issues of public concern including: (1) physical health (alcohol and drugs, falls and accidents,…

40 CFR 143.4 - Monitoring.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Criteria for analyzing aluminum, copper, iron, manganese, silver and zinc samples with digestion or directly without digestion, and other analytical test procedures are contained in Technical Notes on...

40 CFR 143.4 - Monitoring.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... Criteria for analyzing aluminum, copper, iron, manganese, silver and zinc samples with digestion or directly without digestion, and other analytical test procedures are contained in Technical Notes on...

40 CFR 143.4 - Monitoring.

Code of Federal Regulations, 2011 CFR

2011-07-01

.... Criteria for analyzing aluminum, copper, iron, manganese, silver and zinc samples with digestion or directly without digestion, and other analytical test procedures are contained in Technical Notes on...

40 CFR 143.4 - Monitoring.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... Criteria for analyzing aluminum, copper, iron, manganese, silver and zinc samples with digestion or directly without digestion, and other analytical test procedures are contained in Technical Notes on...

Technical note: Computer-manufactured inserts for prosthetic sockets.

PubMed

Sanders, Joan E; McLean, Jake B; Cagle, John C; Gardner, David W; Allyn, Katheryn J

2016-08-01

The objective of this research was to use computer-aided design software and a tabletop 3-D additive manufacturing system to design and fabricate custom plastic inserts for trans-tibial prosthesis users. Shape quality of inserts was tested right after they were inserted into participant's test sockets and again after four weeks of wear. Inserts remained properly positioned and intact throughout testing. Right after insertion the inserts caused the socket to be slightly under-sized, by a mean of 0.11mm, approximately 55% of the thickness of a nylon sheath. After four weeks of wear the under-sizing was less, averaging 0.03mm, approximately 15% of the thickness of a nylon sheath. Thus the inserts settled into the sockets over time. If existing prosthetic design software packages were enhanced to conduct insert design and to automatically generate fabrication files for manufacturing, then computer manufactured inserts may offer advantages over traditional methods in terms of speed of fabrication, ease of design, modification, and record keeping. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

Using NVMe Gen3 PCIe SSD Cards in High-density Servers for High-performance Big Data Transfer Over Multiple Network Channels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fang, Chin

This Technical Note describes how the Zettar team came up with a data transfer cluster design that convincingly proved the feasibility of using high-density servers for high-performance Big Data transfers. It then outlines the tests, operations, and observations that address a potential over-heating concern regarding the use of Non-Volatile Memory Host Controller Interface Specification (NVMHCI aka NVM Express or NVMe) Gen 3 PCIe SSD cards in high-density servers. Finally, it points out the possibility of developing a new generation of high-performance Science DMZ data transfer system for the data-intensive research community and commercial enterprises.

Impact of computer-assisted data collection, evaluation and management on the cancer genetic counselor's time providing patient care.

PubMed

Cohen, Stephanie A; McIlvried, Dawn E

2011-06-01

Cancer genetic counseling sessions traditionally encompass collecting medical and family history information, evaluating that information for the likelihood of a genetic predisposition for a hereditary cancer syndrome, conveying that information to the patient, offering genetic testing when appropriate, obtaining consent and subsequently documenting the encounter with a clinic note and pedigree. Software programs exist to collect family and medical history information electronically, intending to improve efficiency and simplicity of collecting, managing and storing this data. This study compares the genetic counselor's time spent in cancer genetic counseling tasks in a traditional model and one using computer-assisted data collection, which is then used to generate a pedigree, risk assessment and consult note. Genetic counselor time spent collecting family and medical history and providing face-to-face counseling for a new patient session decreased from an average of 85-69 min when using the computer-assisted data collection. However, there was no statistically significant change in overall genetic counselor time on all aspects of the genetic counseling process, due to an increased amount of time spent generating an electronic pedigree and consult note. Improvements in the computer program's technical design would potentially minimize data manipulation. Certain aspects of this program, such as electronic collection of family history and risk assessment, appear effective in improving cancer genetic counseling efficiency while others, such as generating an electronic pedigree and consult note, do not.

AVAILABLE INSTRUCTIONAL MATERIALS.

ERIC Educational Resources Information Center

Indiana State Univ., Terre Haute.

THE INSTRUCTIONAL MATERIALS INCLUDE PROGRAM BROCHURES, CHARTS, COURSE OUTLINES, OVERHEAD TRANSPARENCIES, ASSIGNMENT SHEETS, STUDENT MANUALS, TEACHER MANUALS, TECHNICAL INFORMATION, AND RELATED INFORMATION IN VOCATIONAL EDUCATION. A BRIEF NOTE DESCRIBES EACH. (EM)

Commercialization of parabolic dish systems

NASA Technical Reports Server (NTRS)

Washom, B.

1982-01-01

The impact of recent federal tax and regulatory legislation on the commercialization of parabolic solar reflector technology is assessed. Specific areas in need of technical or economic improvement are noted.

Commercialization of parabolic dish systems

NASA Astrophysics Data System (ADS)

Washom, B.

1982-07-01

The impact of recent federal tax and regulatory legislation on the commercialization of parabolic solar reflector technology is assessed. Specific areas in need of technical or economic improvement are noted.

Operation Manual for the Intensity Based Interrogation of Fibre Bragg Grating Arrays on Vibrating Structures

DTIC Science & Technology

2011-01-01

based demodulation approach for the measurement of strains, induced by structural vibrations, using Fiber Bragg Gratings ( FBG ). This companion...provide the Frequency Response Functions from a series of FBG arrays attached to a vibrating structure. RELEASE LIMITATION Approved for... FBG arrays attached to a vibrating structure. Both this technical note and its companion technical report are formal contributions to an

Ammunition Cost Research Study

DTIC Science & Technology

1976-06-01

LIBRARY TECHNICAL REPORT Gerald W. Kalal Patrick J. Gannon COST ANALYSIS DIVISION (DRSAR-CPE) HEADQUARTERS, U.S. ARMY ARMAMENT COMMAND ROCK ISLAND... Kalal trick J. Gannon COST ANALYSIS DIVISION (DRSAR-CPE) HEADQUARTERS, U.S. ARMY ARMAMENT COMMAND ROCK ISLAND, ILLINOIS 61201 I UNCLASSIFIED...4. DESCRIPTIVE NOTES (Type ot report and Inclusive date») Technical Report 8- AU THOR(S> (flral name, middle Initial, laat name) Gerald W. Kalal

Teaching Notes

NASA Astrophysics Data System (ADS)

2001-11-01

Where teachers share ideas and teaching solutions with the wider physics teaching community: contact ped@iop.org. Contents: Technical Trimmings: The ALBA interface and logger Technical Trimmings: A constant velocity apparatus based on Lenz's Law On the Map: Ashfield School: A Technology College Let's Investigate: Microwave frustration Physics on a Shoestring: Variation of pressure with depth Starting Out: First Year Fun! My Way: Grüneisen's law for the classroom Curiosity: Aqua-Magic

East Europe Report, Political, Sociological and Military Affairs

DTIC Science & Technology

1984-09-20

for Public Release’ Distribution Unl’-rs^.H ****** *®SPEG?%B FBIS FOREIGN BROADCAST INFORMATION SERVICE REPRODUCED BY NATIONAL TECHNICAL U...INFORMATION SERVICE T U.S. DEPARTMENT OF COMMERCE / fsQ SPRINGFIELD, VA. 22161 ’ u | NOTE JPRS publications contain information primarily from...ordered from the National Technical Information Service , Springfield, Virginia 22161. In order- ing, it is recommended that the JPRS number, title

A Complete Tank Test of a Model of Flying-boat Hull - N.A.C.A. Model 16

NASA Technical Reports Server (NTRS)

Shoemaker, James H

1933-01-01

A model of a 2-step flying-boat hull, of the type generally used in England, was tested according to the complete method described in the N.A.C.A. Technical Note No. 464. The lines of this model were taken from offsets given by Mr. William Munro in Flight, May 29, 1931. The data cover the range of loads, speeds, and trim angles that may be of use in applying the hull form to the design of any seaplane. The results are reduced to nondimensional form to aid application to design problems and facilitate comparison with the performance of other hulls. The water characteristics of Model 16 are compared with those of Model 11-A, which is representative of current American practice. The results show that when the two forms are applied to a given seaplane design under optimum conditions for each, the performance of Model 16 will be somewhat inferior to that of Model 11-A.

Technical note: A 3D-printed phantom for routine accuracy check of Gamma Knife Icon HDMM system.

PubMed

Wu, Chuan; Radevic, Marlyn B; Glass, Jennifer S; Skubic, Stan E

2018-05-23

To report a novel 3D-printed device ("SH phantom") that is designed for routine accuracy check of the Gamma Knife Icon High Definition Motion Management (HDMM) system. SH phantom was designed using tinkerCAD software and printed on a commercial 3D printer. We evaluated the SH phantom on our Gamma Knife Icon unit regarding its usability and accuracy for routine HDMM QA. Single-axis and multiple-axis measurements validated the SH phantom design and implementation. An HDMM QA accuracy of 0.22 mm or better along single axis was found using SH phantom. The SH phantom proved to be a quick and simple tool to use to perform the HDMM system QA. The SH phantom was tested successfully and adopted by us as part of monthly QA for the Gamma Knife Icon. © 2018 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Some aerodynamic discoveries and related NACA/NASA research programs following World War 2

NASA Technical Reports Server (NTRS)

Spearman, M. L.

1984-01-01

The World War 2 time period ushered in a new era in aeronautical research and development. The air conflict during the war highlighted the need of aircraft with agility, high speed, long range, large payload capability, and in addition, introduced a new concept in air warfare through the use of guided missiles. Following the war, the influx of foreign technology, primarily German, led to rapid advances in jet propulsion and speed, and a host of new problem areas associated with high-speed flight designs were revealed. The resolution of these problems led to a rash of new design concepts and many of the lessons learned, in principle, are still effective today. In addition to the technical lessons learned related to aircraft development programs, it might also be noted that some lessons involving the political and philosophical nature of aircraft development programs are worth attention.

Coil-Assisted Retrograde Transvenous Obliteration (CARTO) for the Treatment of Portal Hypertensive Variceal Bleeding: Preliminary Results

PubMed Central

Lee, Edward W; Saab, Sammy; Gomes, Antoinette S; Busuttil, Ronald; McWilliams, Justin; Durazo, Francisco; Han, Steven-Huy; Goldstein, Leonard; Tafti, Bashir A; Moriarty, John; Loh, Christopher T; Kee, Stephen T

2014-01-01

OBJECTIVES: To describe the technical feasibility, safety, and clinical outcomes of coil-assisted retrograde transvenous obliteration (CARTO) in treating portal hypertensive non-esophageal variceal hemorrhage. METHODS: From October 2012 to December 2013, 20 patients who received CARTO for the treatment of portal hypertensive non-esophageal variceal bleeding were retrospectively evaluated. All 20 patients had at least 6-month follow-up. All patients had detachable coils placed to occlude the efferent shunt and retrograde gelfoam embolization to achieve complete thrombosis/obliteration of varices. Technical success, clinical success, rebleeding, and complications were evaluated at follow-up. RESULTS: A 100% technical success rate (defined as achieving complete occlusion of efferent shunt with complete thrombosis/obliteration of bleeding varices and/or stopping variceal bleeding) was demonstrated in all 20 patients. Clinical success rate (defined as no variceal rebleeding) was 100%. Follow-up computed tomography after CARTO demonstrated decrease in size with complete thrombosis and disappearance of the varices in all 20 patients. Thirteen out of the 20 had endoscopic confirmation of resolution of varices. Minor post-CARTO complications, including worsening of esophageal varices (not bleeding) and worsening of ascites/hydrothorax, were noted in 5 patients (25%). One patient passed away at 24 days after the CARTO due to systemic and portal venous thrombosis and multi-organ failure. Otherwise, no major complication was noted. No variceal rebleeding was noted in all 20 patients during mean follow-up of 384±154 days. CONCLUSIONS: CARTO appears to be a technically feasible and safe alternative to traditional balloon-occluded retrograde transvenous obliteration or transjugular intrahepatic portosystemic shunt, with excellent clinical outcomes in treating portal hypertensive non-esophageal variceal bleeding. PMID:25273155

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curran, Scott; Wagner, Robert M.; Campbell, Russ

The SAE 2016 Range Extenders for Electric Vehicles Symposium was a 2-day technical meeting focused on the role of advanced internal combustion engines (ICEs) and other novel energy converter technologies for extending the range of electric vehicles (EVs). The first-of-its-kind symposium was notable for focusing solely on the range extender (REx) technologies and not the EVs. The technical program featured presentations from international leaders from industry, government, national laboratories, and academia. The opening keynote presentations covered a broad range of topics including consumer behavior, policy implications, regulatory considerations, and REx architectures as enablers for advanced technologies. The technical sessions focusedmore » on an array of REx technologies including conventional ICEs, as well as less conventional or emerging technologies such as microturbines, fuel cells, low-temperature combustion engines, and aluminum-air batteries. The symposium included two panel sessions. The trend toward increasing vehicle electrification and the changing role of ICEs and other auxiliary power unit technologies for use as REx’s is leading to new research and design development needs. The symposium captured the interest of the industry and research communities in exploring the opportunities and challenges associated with REx’s for EVs. This report includes key takeaways, summarized below, and draft notes for each presentation and panel discussion.« less

Performance of Compiler-Assisted Memory Safety Checking

DTIC Science & Technology

2014-08-01

software developer has in mind a particular object to which the pointer should point, the intended referent. A memory access error occurs when an ac...Performance of Compiler-Assisted Memory Safety Checking David Keaton Robert C. Seacord August 2014 TECHNICAL NOTE CMU/SEI-2014-TN...based memory safety checking tool and the performance that can be achieved with two such tools whose source code is freely available. The note then

7 CFR Exhibit F to Subpart I of... - Site Option Loan to Technical Assistance Grantees

Code of Federal Regulations, 2012 CFR

2012-01-01

... SO funds advanced on the option, unless SO loan funds will still be needed to purchase other options...) The “kind of loan” block on the note will read “SO loan.” (2) The note will be modified to show that the only installment on the loan will be the final installment. (C) Loan is closed. The loan will be...

7 CFR Exhibit F to Subpart I of... - Site Option Loan to Technical Assistance Grantees

Code of Federal Regulations, 2014 CFR

2014-01-01

... SO funds advanced on the option, unless SO loan funds will still be needed to purchase other options...) The “kind of loan” block on the note will read “SO loan.” (2) The note will be modified to show that the only installment on the loan will be the final installment. (C) Loan is closed. The loan will be...

7 CFR Exhibit F to Subpart I of... - Site Option Loan to Technical Assistance Grantees

Code of Federal Regulations, 2013 CFR

2013-01-01

... SO funds advanced on the option, unless SO loan funds will still be needed to purchase other options...) The “kind of loan” block on the note will read “SO loan.” (2) The note will be modified to show that the only installment on the loan will be the final installment. (C) Loan is closed. The loan will be...

The Crossroads between Workforce and Education

PubMed Central

Jackson, Kathryn; Lower, Christi L.; Rudman, William J.

2016-01-01

Concern is growing among industry leaders that students may not be obtaining the necessary skills for entry into the labor market. To gain an understanding of the perceived disconnect in the skill set of graduates entering the health information workforce, a survey was developed to examine the opinions of educators and employers related to graduate preparedness. The concern related to graduate preparedness is supported by findings in this research study, in which those working in industry and those in academia noted a disconnect between academic training and preparedness to enter the labor market. A statistically significant difference was found between labor leaders and academics in their assessment of graduates' preparation in the areas of technical, communication, and leadership skills. Educators noted higher levels of preparedness of students with regard to professional and technical skills and leadership skills, while both educators and industry respondents noted a need for improved employability skills (e.g., communication skills and workplace etiquette). No difference was found between the two groups with regard to the need to increase apprenticeships and professional practice experience to cover this gap in formal training. Finally, when asked how the federal government might assist with preparing students, more than half of the respondents noted the importance of apprenticeships and funding for these opportunities. PMID:27134612

The Crossroads between Workforce and Education.

PubMed

Jackson, Kathryn; Lower, Christi L; Rudman, William J

2016-01-01

Concern is growing among industry leaders that students may not be obtaining the necessary skills for entry into the labor market. To gain an understanding of the perceived disconnect in the skill set of graduates entering the health information workforce, a survey was developed to examine the opinions of educators and employers related to graduate preparedness. The concern related to graduate preparedness is supported by findings in this research study, in which those working in industry and those in academia noted a disconnect between academic training and preparedness to enter the labor market. A statistically significant difference was found between labor leaders and academics in their assessment of graduates' preparation in the areas of technical, communication, and leadership skills. Educators noted higher levels of preparedness of students with regard to professional and technical skills and leadership skills, while both educators and industry respondents noted a need for improved employability skills (e.g., communication skills and workplace etiquette). No difference was found between the two groups with regard to the need to increase apprenticeships and professional practice experience to cover this gap in formal training. Finally, when asked how the federal government might assist with preparing students, more than half of the respondents noted the importance of apprenticeships and funding for these opportunities.

User-centered design in clinical handover: exploring post-implementation outcomes for clinicians.

PubMed

Wong, Ming Chao; Cummings, Elizabeth; Turner, Paul

2013-01-01

This paper examines the outcomes for clinicians from their involvement in the development of an electronic clinical hand-over tool developed using principles of user-centered design. Conventional e-health post-implementation evaluations tend to emphasize technology-related (mostly positive) outcomes. More recently, unintended (mostly negative) consequences arising from the implementation of e-health technologies have also been reported. There remains limited focus on the post-implementation outcomes for users, particularly those directly involved in e-health design processes. This paper presents detailed analysis and insights into the outcomes experienced post-implementation by a cohort of junior clinicians involved in developing an electronic clinical handover tool in Tasmania, Australia. The qualitative methods used included observations, semi-structured interviews and analysis of clinical handover notes. Significantly, a number of unanticipated flow-on effects were identified that mitigated some of the challenges arising during the design and implementation of the tool. The paper concludes by highlighting the importance of identifying post-implementation user outcomes beyond conventional system adoption and use and also points to the need for more comprehensive evaluative frameworks to encapsulate these broader socio-technical user outcomes.

Two design of the S4.BEN01 magnet for the CBETA splitter/merger

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsoupas, N.; Berg, S.; Meot, F.

2017-04-10

The splitter/merger section of the CBETA project [1] consists of 4 beam lines as shown in Fig. 1. Two of the functions of the splitter’s/merger’s lines is to match the beam parameters at the exit of the Energy Recovery Linac (ERL) to the beam parameters at the entrance of the Fixed Field Alternating Gradient (FFAG) arc, and also place the reference particles of the beam bunches at the entrance of the FFAG arc on specified trajectories according to their energies. In this technical note we are presenting results from the 2D and 3D electromagnetic analysis of the S4.BEN01 magnet whichmore » is one of the dipole magnets of the 150 MeV line of the splitter/merger. In particular we present results from two designs of the S4.BEN01 magnet, one based on iron dominated current-excited magnet, and the other design based on Halbach-type permanent magnet. An evaluation of the two designs will be given in the section under “conclusion”.« less

The algorithm of numerical calculation of constraints reactions in a dynamic system of transport machine

NASA Astrophysics Data System (ADS)

Akhtulov, A. L.

2018-01-01

The questions of construction and practical application of the automation system for the design of components and aggregates for the construction of transport vehicles are considered, taking into account their dynamic characteristics. Based on the results of the studies, a unified method for determining the reactions of bonds of a complex spatial structure is proposed. The technique, based on the method of substructures, allows us to determine the values of the transfer functions taking into account the reactions of the bonds. After the carried out researches it is necessary to note, that such approach gives the most satisfactory results and can be used for calculations of complex mechanical systems of machines and units of different purposes. The directions of increasing the degree of validity of technical decisions are shown, especially in the early stages of design, when the cost of errors is high, with careful thorough working out of all the elements of the design, which is really feasible only on the basis of automation of design and technological work.

Drug Abuse and Drug Abuse Research. The Third Triennial Report to Congress from the Secretary, Department of Health and Human Services.

ERIC Educational Resources Information Center

National Inst. on Drug Abuse (DHHS/PHS), Rockville, MD.

This report summarizes changes that have occurred in understanding of the health implications of the use and abuse of illegal and legal drugs as a result of research since 1986. It is noted that wherever possible, research findings have been summarized in non-technical language. Some technical material is included because of its basic importance…

China Report, Political, Sociological and Military Affairs, No. 428

DTIC Science & Technology

1983-06-09

Appeared for pabüw reime«? Dbrtrtbutlam üaUmltad ^ 99806 7 7 m FBIS FOREIGN BROADCAST INFORMATION SERVICE NOTE JPRS publications contain...JPRS publications may be ordered from the National Technical Information Service , Springfield, Virginia 22161. In order- ing, it is recommended that...Announcements issued semi-monthly by the National Technical Information Service , and are listed in the Monthly Catalog of U.S. Government Publications

Leader Identity, Individual Differences, and Leader Self-Development

DTIC Science & Technology

2012-09-01

and Social Sciences Approved for public release; distribution is unlimited. U.S. Army Research Institute for the Behavioral and Social ... Social Sciences, Attn: DAPC-ARI-MS, 6000 6th Street, Fort Belvoir, VA 22060-5586. FINAL DISPOSITION: Destroy this Technical Report when it is no...longer needed. Do not return it to the U.S. Army Research Institute for the Behavioral and Social Sciences. NOTE: The findings in this Technical

Ground-Based Radiometric Measurements of Slant Path Attenuation in the V/W Bands

DTIC Science & Technology

2016-04-01

GROUND-BASED RADIOMETRIC MEASUREMENTS OF SLANT PATH ATTENUATION IN THE V/W BANDS APRIL 2016 FINAL TECHNICAL REPORT APPROVED FOR PUBLIC RELEASE...2. REPORT TYPE FINAL TECHNICAL REPORT 3. DATES COVERED (From - To) OCT 2012 – SEP 2015 4. TITLE AND SUBTITLE GROUND-BASED RADIOMETRIC MEASUREMENTS ...SUPPLEMENTARY NOTES 14. ABSTRACT Ground-based radiometric techniques were applied to measure the slant path attenuation cumulative distribution function to

Technical aspects of pediatric epilepsy surgery: Report of a multicenter, multinational web-based survey by the ILAE Task Force on Pediatric Epilepsy Surgery.

PubMed

Cukiert, Arthur; Rydenhag, Bertil; Harkness, William; Cross, J Helen; Gaillard, William D

2016-02-01

Surgical techniques may vary extensively between centers. We report on a web-based survey aimed at evaluating the current technical approaches in different centers around the world performing epilepsy surgery in children. The intention of the survey was to establish technical standards. A request was made to 88 centers to complete a web-based survey comprising 51 questions. There were 14 questions related to general issues, 13 questions investigating the different technical aspects for children undergoing epilepsy surgery, and 24 questions investigating surgical strategies in pediatric epilepsy surgery. Fifty-two centers covering a wide geographic representation completed the questionnaire. The median number of resective procedures per center per year was 47. Some important technical practices appeared (>80% of the responses) such as the use of prophylactic antibiotics (98%), the use of high-speed drills for bone opening (88%), nonresorbable material for bone flap closure (85%), head fixation (90%), use of the surgical microscope (100%), and of free bone flaps. Other questions, such as the use of drains, electrocorticography (ECoG) and preoperative withdrawal of valproate, led to mixed, inconclusive results. Complications were noted in 3.8% of the patients submitted to cortical resection, 9.9% hemispheric surgery, 5% callosotomy, 1.8% depth electrode implantation, 5.9% subdural grids implantation, 11.9% hypothalamic hamartoma resection, 0.9% vagus nerve stimulation (VNS), and 0.5% deep brain stimulation. There were no major differences across regions or countries in any of the subitems above. The present data offer the first overview of the technical aspects of pediatric epilepsy surgery worldwide. Surprisingly, there seem to be more similarities than differences. That aside many of the evaluated issues should be examined by adequately designed multicenter randomized controlled trials (RCTs). Further knowledge on these technical issues might lead to increased standardization and lower costs in the future, as well as definitive practice guidelines. Wiley Periodicals, Inc. © 2016 International League Against Epilepsy.

Audit Report on "Work for Others Performed by the Department of Energy for the Department of Defense"

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Pursuant to the Atomic Energy Act of 1954, as amended, and the Economy Act of 1932, the Department of Energy and its semi-autonomous National Nuclear Security Administration (NNSA) provide research and technical assistance to other Federal agencies on a reimbursable, full cost recovery basis through the Work for Others (WFO) program. For the vast majority of WFO technical projects, Department Federal officials furnish administrative project oversight while the actual detailed scientific or technical work is completed by the Department's 'management and operating' contractors. These contractors are awarded a special contract type specifically created under the Federal Acquisition Regulation to managemore » and operate Department sites and facilities, including sophisticated laboratories and technical centers, on a government-owned, contractor-operated basis. With annual expenditures exceeding $1 billion, the Department of Defense (DoD) is one of the Department's largest WFO customers. Work performed for DoD at the Department's national laboratories and other facilities includes highly technical research in areas such as nuclear weapons systems, counter-terrorism, and in-theater troop support. The National Defense Authorization Act for Fiscal Year (FY) 2009, required the Inspectors General of the DoD and the Department to review procurement methods to determine whether the Department complied with DoD procurement requirements and/or whether alternative procurement policies were in place. In response, we focused our review on projects performed by NNSA because it completes the vast majority (approximately $900 million in FY 2008) of the Department's work for DoD. As part of this effort, and, at the specific request of the DoD Office of Inspector General (DoD OIG), we identified the universe of WFO technical projects that received new funding in the fourth quarter of FY 2008 at NNSA sites. We independently reviewed a judgmental sample of 11 projects selected by the DoD OIG to meet the objectives of this audit. Our review revealed that NNSA managed DoD WFO technical projects in a manner consistent with requirements of the Atomic Energy Act of 1954, the Federal Acquisition Regulation, and the Department's implementing guidance, the Department of Energy Acquisition Regulation. Because of the very nature of the Department's management and operating contracting model, WFO projects may not be technically compliant with DoD procurement regulations in certain instances. We found that NNSA did not let new contracts or task orders for the DoD WFO technical projects we reviewed and instead managed them under its existing internal control process as part of its management and operating contract structure. In one instance, we noted that the Department had, at DoD's request, supplemented its control structure to incorporate specific DoD procurement requirements. Senior Department of Energy procurement officials acknowledged that neither the Department nor NNSA modified their existing prime contracts to incorporate specific defense procurement requirements because such modifications would be inappropriate, costly, and inefficient. In short, they informed us that the Department had developed and implemented a series of controls designed to monitor overall contractor performance, including WFO technical projects. Department and NNSA officials noted, however, that they were willing to incorporate DoD specific requirements into work orders should DoD request and fund such efforts. Additional details regarding management of WFO technical projects are discussed in the body of this report.« less

Surgery via natural orifices in human beings: yesterday, today, tomorrow.

PubMed

Moris, Demetrios N; Bramis, Konstantinos J; Mantonakis, Eleftherios I; Papalampros, Efstathios L; Petrou, Athanasios S; Papalampros, Alexandros E

2012-07-01

We performed an evaluation of models, techniques, and applicability to the clinical setting of natural orifice surgery (mainly natural orifice transluminal endoscopic surgery [NOTES]) primarily in general surgery procedures. NOTES has attracted much attention recently for its potential to establish a completely alternative approach to the traditional surgical procedures performed entirely through a natural orifice. Beyond the potentially scar-free surgery and abolishment of dermal incision-related complications, the safety and efficacy of this new surgical technology must be evaluated. Studies were identified by searching MEDLINE, EMBASE, Cochrane Library, and Entrez PubMed from 2007 to February 2011. Most of the references were identified from 2009 to 2010. There were limitations as far as the population that was evaluated (only human beings, no cadavers or animals) was concerned, but there were no limitations concerning the level of evidence of the studies that were evaluated. The studies that were deemed applicable for our review were published mainly from 2007 to 2010 (see Methods section). All the evaluated studies were conducted only in human beings. We studied the most common referred in the literature orifices such as vaginal, oral, gastric, esophageal, anal, or urethral. The optimal access route and method could not be established because of the different nature of each procedure. We mainly studied procedures in the field of general surgery such as cholecystectomy, intestinal cancers, renal cancers, appendectomy, mediastinoscopy, and peritoneoscopy. All procedures were feasible and most of them had an uneventful postoperative course. A number of technical problems were encountered, especially as far as pure NOTES procedures are concerned, which makes the need of developing new endoscopic instruments, to facilitate each approach, undeniable. NOTES is still in the early stages of development and more robust technologies will be needed to achieve reliable closure and overcome technical challenges. Well-designed studies in human beings need to be conducted to determine the safety and efficacy of NOTES in a clinical setting. Among these NOTES approaches, the transvaginal route seems less complicated because it virtually eliminates concerns for leakage and fistulas. The transvaginal approach further favors upper-abdominal surgeries because it provides better maneuverability to upper-abdominal organs (eg, liver, gallbladder, spleen, abdominal esophagus, and stomach). The stomach is considered one of the most promising targets because this large organ, once adequately mobilized, can be transected easily with a stapler. The majority of the approaches seem to be feasible even with the equipment used nowadays, but to achieve better results and wider applications to human beings, the need to develop new endoscopic instruments to facilitate each approach is necessary. Copyright © 2012 Elsevier Inc. All rights reserved.

Understanding Digital Note-Taking Practice for Visualization.

PubMed

Willett, Wesley; Goffin, Pascal; Isenberg, Petra

2015-05-13

We present results and design implications from a study of digital note-taking practice to examine how visualization can support revisitation, reflection, and collaboration around notes. As digital notebooks become common forms of external memory, keeping track of volumes of content is increasingly difficult. Information visualization tools can help give note-takers an overview of their content and allow them to explore diverse sets of notes, find and organize related content, and compare their notes with their collaborators. To ground the design of such tools, we conducted a detailed mixed-methods study of digital note-taking practice. We identify a variety of different editing, organization, and sharing methods used by digital note-takers, many of which result in notes becoming "lost in the pile''. These findings form the basis for our design considerations that examine how visualization can support the revisitation, organization, and sharing of digital notes.

BASINS User Information and Guidance

EPA Pesticide Factsheets

This page provides links to guidance on how to use BASINS, including the User’s Manual, tutorials and training, technical notes, case studies, and publications that highlight the use of BASINS in various watershed analyses.

Technical Note: Introduction of variance component analysis to setup error analysis in radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matsuo, Yukinori, E-mail: ymatsuo@kuhp.kyoto-u.ac.

Purpose: The purpose of this technical note is to introduce variance component analysis to the estimation of systematic and random components in setup error of radiotherapy. Methods: Balanced data according to the one-factor random effect model were assumed. Results: Analysis-of-variance (ANOVA)-based computation was applied to estimate the values and their confidence intervals (CIs) for systematic and random errors and the population mean of setup errors. The conventional method overestimates systematic error, especially in hypofractionated settings. The CI for systematic error becomes much wider than that for random error. The ANOVA-based estimation can be extended to a multifactor model considering multiplemore » causes of setup errors (e.g., interpatient, interfraction, and intrafraction). Conclusions: Variance component analysis may lead to novel applications to setup error analysis in radiotherapy.« less

Arthroscopic all-inside repair for a tear of posterior root of the medial meniscus: a technical note.

PubMed

Choi, Nam-Hong; Son, Kyung-Mo; Victoroff, Brian N

2008-09-01

This technical note describes a new arthroscopic technique to repair a tear of posterior root of the medial meniscus. Cartilage at the insertion area of the posterior horn of the medial meniscus (PHMM) was removed using a curved curette inserted through an anteromedial portal. A metal anchor loaded with two FiberWires (Arthrex, Naples, FL) was placed at the insertion area of the PHMM through a high posteromedial portal. A PDS suture was passed the PHMM by curved suture hook through the anteromedial portal. Two limbs of the PDS were then used to pass two limbs of the FiberWire through the meniscus. The same procedure was repeated for the second FiberWire suture. The sutures were tied, achieving secure fixation of the posterior meniscal root at the anatomic insertion.

Precision in robotic rectal surgery using the da Vinci Xi system and integrated table motion, a technical note.

PubMed

Panteleimonitis, Sofoklis; Harper, Mick; Hall, Stuart; Figueiredo, Nuno; Qureshi, Tahseen; Parvaiz, Amjad

2017-09-15

Robotic rectal surgery is becoming increasingly more popular among colorectal surgeons. However, time spent on robotic platform docking, arm clashing and undocking of the platform during the procedure are factors that surgeons often find cumbersome and time consuming. The newest surgical platform, the da Vinci Xi, coupled with integrated table motion can help to overcome these problems. This technical note aims to describe a standardised operative technique of single docking robotic rectal surgery using the da Vinci Xi system and integrated table motion. A stepwise approach of the da Vinci docking process and surgical technique is described accompanied by an intra-operative video that demonstrates this technique. We also present data collected from a prospectively maintained database. 33 consecutive rectal cancer patients (24 male, 9 female) received robotic rectal surgery with the da Vinci Xi during the preparation of this technical note. 29 (88%) patients had anterior resections, and four (12%) had abdominoperineal excisions. There were no conversions, no anastomotic leaks and no mortality. Median operation time was 331 (249-372) min, blood loss 20 (20-45) mls and length of stay 6.5 (4-8) days. 30-day readmission rate and re-operation rates were 3% (n = 1). This standardised technique of single docking robotic rectal surgery with the da Vinci Xi is safe, feasible and reproducible. The technological advances of the new robotic system facilitate the totally robotic single docking approach.

Immediate implant-supported oral rehabilitation using a photocurable plastic skull model and laser welding. A technical note on the screw-retained type: Part 1.

PubMed

Tomotake, Yoritoki; Ishida, Osamu; Kanitani, Hideo; Ichikawa, Tetsuo

2002-01-01

This article describes a new procedure for immediate implant-supported oral rehabilitation using a photocurable resin skull model and a laser-welding apparatus. Preoperatively, the framework was fabricated on a photocurable resin skull model produced from a CT scan and individually designed guide template. The implants were immediately placed using the guide template; laser welding connected the components of framework. Despite the custom-made prosthesis, the total treatment from implant placement to superstructure placement can be completed within only 1 day. This procedure for immediate implant-supported oral rehabilitation using a photocurable resin skull model and a laser-welding apparatus may be useful for any implant system and patient.

NLS cycle 1 and NLS 2 base heating technical notes. Appendix 3: Preliminary cycle 1 NLS base heating environments. Cycle 1 NLS base heating environments. NLS 2 650K STME base heating environments

NASA Technical Reports Server (NTRS)

Bender, Robert L.; Reardon, John E.; Prendergast, Maurice J.; Schmitz, Craig P.; Brown, John R.

1992-01-01

A preliminary analysis of National Launch System ascent plume induced base heating environments has been completed to support the Induced Environments Panel's objective to assist in maturing the NLS vehicle (1.5 stage and heavy launch lift vehicle) design. Environments during ascent have been determined from this analysis for a few selected locations on the engine nozzles and base heat shield for both vehicles. The environments reflect early summer 1991 configurations and performance data and conservative methodology. A more complete and thorough analysis is under way to update these environments for the cycle 1 review in January 1992.

Rapid Development: A Content Analysis Comparison of Literature and Purposive Sampling of AFRL Rapid Reaction Projects

DTIC Science & Technology

2011-12-01

systems engineering technical and technical management processes. Technical Planning, Stakeholders Requirements Development, and Architecture Design were...Stakeholder Requirements Definition, Architecture Design and Technical Planning. A purposive sampling of AFRL rapid development program managers and engineers...emphasize one process over another however Architecture Design , Implementation scored higher among Technical Processes. Decision Analysis, Technical

The anatomy of the gyroscope

NASA Astrophysics Data System (ADS)

Cousins, Frank W.; Hollington, John L.

1988-02-01

This report on the gyroscope and its applications collates the technical information to be found in the patent literature, augmented by that in text books and technical journals. The report is in three parts: Part 1 is a patent survey arranged in a detailed classification; Part 2 comprises a bibliography of the references in Part 1; and Part 3, published as a separate volume, gives historical notes and comments on the material of Parts 1 and 2.

Translations on USSR Political and Sociological Affairs, Number 825. Speeches on Occasion of 60th October Revolution Anniversary

DTIC Science & Technology

1977-12-01

REPRODUCED BY NATIONAL TECHNICAL INFORMATION SERVICE U. S. DEPARTMENT OF COMMERCE SPRINGFIELD, VA. 2216] 20000310 109 NOTE JPRS publications contain...publications may be ordered from the National Technical Information Service (NTIS), Springfield, Virginia 22151. In ordering, it is recom- mended...Australian Socialist Party Leader 60 Chilean Communist Luis Corvalan 61 Uruguayan CP Leader Arismendi 63 Argentine CP Leader 63 Venezuela’s Jesus Faria 64

Bibliography - Technical Reports, Special Reports, and Technical Notes, FY 1981.

DTIC Science & Technology

1982-03-01

Programs. TR 81-24. September 1981. S. R. Harding , B. Mogford, W. H. Melching, and M. Showel. (AD-AI06 370) This report describes the development of four...apply their training in the field and receive greater command support than do ODAOs. Computer-based Approach to the Navy’s Academic Remedial Training...instructional effectiveness of the performance-related enabling skills training (PREST) program with that of the standard classroom approach , quantify the

Technical nuances to minimize common complications of deep brain stimulation.

PubMed

House, Paul

2017-04-01

The implantation of deep brain stimulator electrodes is associated with infrequent complications. These complications are consistent across prospective trials and include infection, skin erosion, hemorrhage, and lead misplacement. Nuances of surgical technique can be used to minimize the risk of these commonly noted complications. Several of these technical nuances are highlighted in this video submission. The video can be found here: https://youtu.be/GL09W9p013g .

A Modernization Plan for the Technical Data Department of the Naval Ships Weapon Systems Engineering Station

DTIC Science & Technology

1976-09-01

technology has made possible the deployment of very sophisticated and highly capable weapon systems. Taking advantage of this technology has carried...3) Ancillary Equipment 208 Types Numerous Notes : 1. Number of ships with this system 2. Includes Tartar used only for surface capability 3. These...maintains the Configuration Item Identification File (CIIF) . The CIIF provides storage and retrieval capability for technical and logistics data specified on

Computer-assisted design/computer-assisted manufacturing zirconia implant fixed complete prostheses: clinical results and technical complications up to 4 years of function.

PubMed

Papaspyridakos, Panos; Lal, Kunal

2013-06-01

To report the clinical results and technical complications with computer-assisted design/computer-assisted manufacturing (CAD/CAM) zirconia, implant fixed complete dental prostheses (IFCDPs) after 2-4 years in function. Fourteen consecutive edentulous patients (16 edentulous arches) were included in this study. Ten of the patients were women and four were men, with an average age of 58 years (range: 35-71). Ten mandibular and six maxillary arches were restored with porcelain fused to zirconia (PFZ) IFCDPs. Of the 16 arches, 14 received one-piece and 2 received segmented two-piece IFCDPs, respectively. The mean clinical follow-up period was 3 years (range: 2-4). At the last recall appointment, biological and technical parameters of dental implant treatment were evaluated. The implant and prosthesis survival rate following prosthesis insertion was 100% up to 4-year follow-up. The prostheses in 11 of the 16 restored arches were structurally sound, exhibited favorable soft tissue response, esthetics, and patient satisfaction. Five IFCDPs (31.25%) in four patients exhibited porcelain veneer chipping. Chipping was minor in three prostheses (three patients) and was addressed intraorally with polishing (one prosthesis) or composite resin (two prostheses). One patient with maxillary and mandibular zirconia IFCDP exhibited major porcelain chipping fractures which had to be repaired in the laboratory. Function, esthetics, and patient satisfaction were not affected in three of the four fracture incidents. Median crestal bone loss was 0.1 mm (0.01-0.2 mm). The presence of parafunctional activity, the IFCDP as opposing dentition, and the absence of occlusal night guard were associated with all the incidents of ceramic chipping. CAD/CAM zirconia IFCDPs are viable prosthetic treatment after 2-4 years in function, but not without complications. The porcelain chipping/fracture was the most frequent technical complication, with a 31.25% chipping rate at the prosthesis level. Despite the technical complications, increased patient satisfaction was noted. © 2012 John Wiley & Sons A/S.

Planet-B: Technical notes and drawings

NASA Technical Reports Server (NTRS)

Carignan, George R.

1996-01-01

The design of the transformer designated as T101 (061-0351) in the Filament/Bias module (061-0119) in the Planet-B NMS instrument was verified because of the differences from the GCMS and INMS instrument designs. A breadboard of a representation of the Hybrid 2301065, Bias Drive A driving a 2N3700 NPN transistor, with dual 75V secondaries, with loads, was used to test the circuit. The initial transformer design that was wound with bifilar secondaries was too unstable to test. The second 1408 transformer with a split bobbin and the feedback winding below the primary was also found to be unstable. (It was nearly impossible to keep the circuit from squeeging). The third transformer tested has the feedback on the outside of the resonant winding. The primary goal of the design was to have as tight a magnetic coupling as possible to the resonant winding, and as loose a coupling as possible to the primary. Further, the circuit AC ground is connected to the winding at the feedback end of the secondary winding. This transformer proved to be very stable - it is virtually impossible to make this design squeg. An emitter resistor (Rl29A) was added to this circuit, as referenced to the GCMS design, to protect Q102 from thermal runaway in the event of a turn on with a non- resonate circuit or load short. This was verified to protect Q102 for at least 30 seconds in the event of a short. Approximately 1% of the 4lmW input power is lost in this protection resistor under normal operation. The circuit was verified to operate normally when a radiated Q102 (2N3700), (low Beta) transistor was substituted for the normal 2N3700. It should be noted that the monitored drive voltage went to approximately 2.7V with this low gain transistor.

Current review of injuries sustained in mixed martial arts competition.

PubMed

Walrod, Bryant

2011-01-01

Mixed martial arts (MMA) have enjoyed a tremendous growth in popularity over the past 10 years, yet there remains a paucity of information with respect to common injuries sustained in MMA competitions. In the available studies, certain trends pertaining to risk factors for injury, as well as the most common injuries sustained in MMA competition, were noted. Common risk factors include being the losing fighter, history of knockout or technical knockout, and longer fight duration. Common injuries that were noted include lacerations and abrasions, followed by injuries to the face and ocular region. Concussions with or without loss of consciousness also were noted in MMA competition.

Technical Note: Ethical Economics

NASA Astrophysics Data System (ADS)

Blodgett, J.

Ethical economics is inspirational, expanding our vision beyond the narrow self-interest of the theoretical economic man. Ethical economics sees more value in space settlement than conventional economic calculations that can inappropriately discount the value of the future.

Natural orifice transluminal endoscopic surgery in urology: Review of the world literature.

PubMed

Bazzi, Wassim M; Raheem, Omer A; Cohen, Seth A; Derweesh, Ithaar H

2012-01-01

Natural orifice transluminal endoscopic surgery (NOTES) has gained momentum in the recent urologic literature as a new surgical approach for intra-abdominal organs with scarless and painless postoperative recoveries. We sought to review the published literature concerning the safety and reproducibility of NOTES in urology. PubMed literature review of articles published in the English language was performed over a 10-year period, i.e., between 2001 and 2011; all articles were critically reviewed and analyzed. Despite its novelty, pure or hybrid surgical approaches have been adapted in performing NOTES. NOTES essentially utilizes transluminal flexible endoscopic instruments along with laparoscopic instruments to gain access to abdominal, pelvic, and/or retroperitoneal cavities. The preliminary results of NOTES in surgery and to a limited extent in urology appear promising, yet further research in animal survival and human cadaveric models is requisite prior to human applications, especially for complex surgeries. Future innovative research, particularly biomedical engineering, should be directed to improving the technicality and mechanistic application of NOTES; hence, better safety and efficacy of NOTES.

ARL Arabic Dependency Treebank

DTIC Science & Technology

2016-02-10

This technical note describes the US Army Research Laboratory (ARL) Arabic Dependency Treebank (AADT) for the purpose of documenting its release. The...AADT was derived from existing Arabic treebanks distributed by the Linguistic Data Consortium using constituent-to- dependency conversion software

Enseigner les termes techniques en francais

ERIC Educational Resources Information Center

Charbonneau, Yvon

1974-01-01

The author notes that most business and economic terms are in English; this, he writes, is unfortunate for the future of the French language. He gives nine ways to teach a technical vocabulary. (The article is in French.) (JA)

The Limpopo Non-Metropolitan Drinking Water Supplier Response to a Diagnostic Tool for Technical Compliance

PubMed Central

Nefale, Avhashoni D.; Kamika, Ilunga; Obi, Chikwelu L.

2017-01-01

Water services providers should supply water that is fit for human consumption, taking into account multi-barrier approaches and technical aspects such as design aspects, operation monitoring, final water quality compliance monitoring, plant monitoring practices, maintenance, and risk management practices. Against this background, this study focused on applying the diagnostic tool for technical compliance as well as assessing the compliance of water treatment plants with management norms. Six plants in the Vhembe District Municipality were selected; the Vondo, Malamulele, Mutshedzi, and Mutale plants (conventional), and the Dzingahe and Tshedza package plants. During the first assessment, four (Malamulele, Mutshedzi, Mutale and Dzingahe) plants scored between 44% and 49% and achieved Class 3 certification, revealing serious challenges requiring immediate intervention. Two water plants (Vondo and Tshedza, scoring 53% and 63%, respectively) were in the Class 2 category, revealing serious challenges requiring attention and improvement. During the second assessment, all plants scored between 63% and 87% (Class 2 category). The greatest improvement (30%) was noted for the Dzingahe and Tshedza plants, followed by the Malamulele plant, while the Mutale, Vondo, and Mutshedzi plants improved their scores by 20%, 17% and 14%, respectively. After corrective actions and re-measurement, no plant complied. It is recommended that Water Services Providers (WSPs) regularly apply the diagnostic tools and water safety plans as developed in order to comply with applicable standards. PMID:28753964

The Limpopo Non-Metropolitan Drinking Water Supplier Response to a Diagnostic Tool for Technical Compliance.

PubMed

Nefale, Avhashoni D; Kamika, Ilunga; Obi, Chikwelu L; Momba, Maggy Nb

2017-07-19

Water services providers should supply water that is fit for human consumption, taking into account multi-barrier approaches and technical aspects such as design aspects, operation monitoring, final water quality compliance monitoring, plant monitoring practices, maintenance, and risk management practices. Against this background, this study focused on applying the diagnostic tool for technical compliance as well as assessing the compliance of water treatment plants with management norms. Six plants in the Vhembe District Municipality were selected; the Vondo, Malamulele, Mutshedzi, and Mutale plants (conventional), and the Dzingahe and Tshedza package plants. During the first assessment, four (Malamulele, Mutshedzi, Mutale and Dzingahe) plants scored between 44% and 49% and achieved Class 3 certification, revealing serious challenges requiring immediate intervention. Two water plants (Vondo and Tshedza, scoring 53% and 63%, respectively) were in the Class 2 category, revealing serious challenges requiring attention and improvement. During the second assessment, all plants scored between 63% and 87% (Class 2 category). The greatest improvement (30%) was noted for the Dzingahe and Tshedza plants, followed by the Malamulele plant, while the Mutale, Vondo, and Mutshedzi plants improved their scores by 20%, 17% and 14%, respectively. After corrective actions and re-measurement, no plant complied. It is recommended that Water Services Providers (WSPs) regularly apply the diagnostic tools and water safety plans as developed in order to comply with applicable standards.

Development, Technical, and User Evaluation of a Web Mobile Application for Self-Control of Diabetes.

PubMed

Garcia-Zapirain, Begoña; de la Torre Díez, Isabel; Sainz de Abajo, Beatriz; López-Coronado, Miguel

2016-09-01

The main objective of this research was to develop and evaluate a Web-based mobile application (app) known as "Diario Diabetes" on both a technical and user level, by means of which individuals with diabetes may monitor their illness easily at any time and in any place using any device that has Internet access. The technologies used to develop the app were HTML, CSS, JavaScript, PHP, and MySQL, all of which are an open source. Once the app was developed, it was evaluated on a technical level (by measuring loading times) and on a user level, through a survey. Different loading times for the application were measured, with it being noted that under no circumstances does this exceed 2 s. Usability was evaluated by 150 users who initially used the application. A majority (71%) of users used a PC to access the app, 83% considered the app's design to be attractive, 67% considered the tasks to be very useful, and 67% found it very easy to use. Although applications exist for controlling diabetes both at mobile virtual shops or on a research level, our app may help to improve the administration of these types of patients and they are the ones who will ultimately opt for one or the other. According to the results obtained, we can state that all users would recommend the app's use to other users.

Development of a high-performance transtibial cycling-specific prosthesis for the London 2012 Paralympic Games.

PubMed

Dyer, Bryce; Woolley, Howard

2017-10-01

It has been reported that cycling-specific research relating to participants with an amputation is extremely limited in both volume and frequency. However, practitioners might participate in the development of cycling-specific prosthetic limbs. This technical note presents the development of a successful design of a prosthetic limb developed specifically for competitive cycling. This project resulted in a hollow composite construction which was low in weight and shaped to reduce a rider's aerodynamic drag. The new prosthesis reduces the overall mass of more traditional designs by a significant amount yet provides a more aerodynamic shape over traditional approaches. These decisions have yielded a measurable increase in cycling performance. While further refinement is needed to reduce the aerodynamic drag as much as possible, this project highlights the benefits that can exist by optimising the design of sports-specific prosthetic limbs. Clinical relevance This project resulted in the creation of a cycling-specific prosthesis which was tailored to the needs of a high-performance environment. Whilst further optimisation is possible, this project provides insight into the development of sports-specific prostheses.

Human interface design using Button-type PEDOT electrode array in EIT

NASA Astrophysics Data System (ADS)

Wi, Hun; In Oh, Tong; Yoon, Sun; Kim, Kap Jin; Woo, Eung Je

2010-04-01

Animal and human experiments using a multi-channel EIT system requires a cumbersome procedure to attach multiple electrodes. We have to ensure good contact of all electrodes and manage many lead wires during experiments. The problem becomes more severe as we increase the number of electrodes. These may limit the applicability of the imaging method in practice. Noting this technical difficulty, there have been a few trials to design human interface means such as electrode belts, helmets or rings. In this study, we developed an electrode belt for long-term monitoring of human lung ventilation. The belt includes 16 embossed electrodes which make good contact with the skin. The electrode is made by conductive polymer and metallic thread. Soft cushion and wide contact area minimize uncomfortable sensation and reduce contact impedances. The electrodes are attached to an elastic fabric belt at equal spacing. We describe details of its design and fabrication. Using the electrode belt and recently developed multi-frequency EIT system KHU Mark2, we show time-difference chest images of three human subjects during normal breathing cycles.

Flat-Panel Cone-Beam Ct-Guided Radiofrequency Ablation of Very Small (≤1.5 cm) Liver Tumors: Technical Note on a Preliminary Experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cazzato, Roberto Luigi, E-mail: r.cazzato@unicampus.it; Buy, Xavier, E-mail: x.buy@bordeaux.unicancer.fr; Alberti, Nicolas, E-mail: nicoalbertibdx@gmail.com

2015-02-15

PurposeThe aim of the present study was to investigate the technical feasibility of flat-panel cone-beam CT (CBCT)-guided radiofrequency ablation (RFA) of very small (<1.5 cm) liver tumors.Materials and MethodsPatients included were candidates for hepatic percutaneous RFA as they had single biopsy-proven hepatic tumors sized ≤1.5 cm and poorly defined on ultrasonography. Following apnea induction, unenhanced CBCT scans were acquired and used to deploy the RF electrode with the aid of a virtual navigation system. If the tumor was not clearly identified on the unenhanced CBCT scan, a right retrograde arterial femoral access was established to carry out hepatic angiography and localize themore » tumor. Patients’ lesions and procedural variables were recorded and analyzed.ResultsThree patients (2 male and 1 female), aged 68, 76, and 87 years were included; 3 lesions (2 hepato-cellular carcinoma and 1 metastasis from colorectal cancer) were treated. One patient required hepatic angiography. Cycles of apnea used to acquire CBCT images and to deploy the electrode lasted <120 s. Mean fluoroscopic time needed to deploy the electrode was 36.6 ± 5.7 min. Mean overall procedural time was 66.0 ± 22.9 min. No peri- or post-procedural complications were noted. No cases of incomplete ablation were noted at 1-month follow-up.ConclusionPercutaneous CBCT-guided liver RFA with or without arterial hepatic angiography is technically feasible.« less

Technical note: Evaluation of the simultaneous measurements of mesospheric OH, HO2, and O3 under a photochemical equilibrium assumption - a statistical approach

NASA Astrophysics Data System (ADS)

Kulikov, Mikhail Y.; Nechaev, Anton A.; Belikovich, Mikhail V.; Ermakova, Tatiana S.; Feigin, Alexander M.

2018-05-01

This Technical Note presents a statistical approach to evaluating simultaneous measurements of several atmospheric components under the assumption of photochemical equilibrium. We consider simultaneous measurements of OH, HO2, and O3 at the altitudes of the mesosphere as a specific example and their daytime photochemical equilibrium as an evaluating relationship. A simplified algebraic equation relating local concentrations of these components in the 50-100 km altitude range has been derived. The parameters of the equation are temperature, neutral density, local zenith angle, and the rates of eight reactions. We have performed a one-year simulation of the mesosphere and lower thermosphere using a 3-D chemical-transport model. The simulation shows that the discrepancy between the calculated evolution of the components and the equilibrium value given by the equation does not exceed 3-4 % in the full range of altitudes independent of season or latitude. We have developed a statistical Bayesian evaluation technique for simultaneous measurements of OH, HO2, and O3 based on the equilibrium equation taking into account the measurement error. The first results of the application of the technique to MLS/Aura data (Microwave Limb Sounder) are presented in this Technical Note. It has been found that the satellite data of the HO2 distribution regularly demonstrate lower altitudes of this component's mesospheric maximum. This has also been confirmed by model HO2 distributions and comparison with offline retrieval of HO2 from the daily zonal means MLS radiance.

Banknotes and unattended cash transactions

NASA Astrophysics Data System (ADS)

Bernardini, Ronald R.

2000-04-01

There is a 64 billion dollar annual unattended cash transaction business in the US with 10 to 20 million daily transactions. Even small problems with the machine readability of banknotes can quickly become a major problem to the machine manufacturer and consumer. Traditional note designs incorporate overt security features for visual validation by the public. Many of these features such as fine line engraving, microprinting and watermarks are unsuitable as machine readable features in low cost note acceptors. Current machine readable features, mostly covert, were designed and implemented with the central banks in mind. These features are only usable by the banks large, high speed currency sorting and validation equipment. New note designs should consider and provide for low cost not acceptors, implementing features developed for inexpensive sensing technologies. Machine readable features are only as good as their consistency. Quality of security features as well as that of the overall printing process must be maintained to ensure reliable and secure operation of note readers. Variations in printing and of the components used to make the note are one of the major causes of poor performance in low cost note acceptors. The involvement of machine manufacturers in new currency designs will aid note producers in the design of a note that is machine friendly, helping to secure the acceptance of the note by the public as well as acting asa deterrent to fraud.

A qualitative appraisal of stakeholder reactions to a tool for burden of disease–based health system budgeting in Ghana

PubMed Central

Awoonor-Williams, John Koku; Schmitt, Margaret L.; Tiah, Janet; Ndago, Joyce; Asuru, Rofina; Bawah, Ayaga A.; Phillips, James F.

2016-01-01

Background In 2010, the Ghana Health Service launched a program of cooperation with the Tanzania Ministry of Health and Social Welfare that was designed to adapt Tanzania's PLANREP budgeting and reporting tool to Ghana's primary health care program. The product of this collaboration is a system of budgeting, data visualization, and reporting that is known as the District Health Planning and Reporting Tool (DiHPART). Objective This study was conducted to evaluate the design and implementation processes (technical, procedures, feedback, maintenance, and monitoring) of the DiHPART tool in northern Ghana. Design This paper reports on a qualitative appraisal of user reactions to the DiHPART system and implications of pilot experience for national scale-up. A total of 20 health officials responsible for financial planning operations were drawn from the national, regional, and district levels of the health system and interviewed in open-ended discussions about their reactions to DiHPART and suggestions for systems development. Results The findings show that technical shortcomings merit correction before scale-up can proceed. The review makes note of features of the software system that could be developed, based on experience gained from the pilot. Changes in the national system of financial reporting and budgeting complicate DiHPART utilization. This attests to the importance of pursuing a software application framework that anticipates the need for automated software generation. Conclusions Despite challenges encountered in the pilot, the results lend support to the notion that evidence-based budgeting merits development and implementation in Ghana. PMID:27246868

Magneto-optic imaging inspection of selected corrosion specimens : technical note

DOT National Transportation Integrated Search

1992-06-21

A feasibility demonstration was conducted at the facilities of Physical Research Instrumentation Company, (RI) in Redmond, Washington. The purpose of the demonstration was to compare the effectiveness of the PRI Model 301-1 magneto-optic imaging (MOI...

Galactic cosmic radiation exposure of pregnant aircrew members II

DOT National Transportation Integrated Search

2000-10-01

This report is an updated version of a previously published Technical Note in the journal Aviation, Space, and Environmental Medicine. The main change is that improved computer programs were used to estimate galactic cosmic radiation. The calculation...

76 FR 62415 - Medicare Program; Establishment of the Medicare Economic Index Technical Advisory Panel and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

..., and productivity adjustment. We noted that we would ask the panel to assess the relevance and accuracy..., price-measurement proxies, and productivity adjustment. The Panel will be asked to assess the relevance...

Forward and backward uncertainty propagation: an oxidation ditch modelling example.

PubMed

Abusam, A; Keesman, K J; van Straten, G

2003-01-01

In the field of water technology, forward uncertainty propagation is frequently used, whereas backward uncertainty propagation is rarely used. In forward uncertainty analysis, one moves from a given (or assumed) parameter subspace towards the corresponding distribution of the output or objective function. However, in the backward uncertainty propagation, one moves in the reverse direction, from the distribution function towards the parameter subspace. Backward uncertainty propagation, which is a generalisation of parameter estimation error analysis, gives information essential for designing experimental or monitoring programmes, and for tighter bounding of parameter uncertainty intervals. The procedure of carrying out backward uncertainty propagation is illustrated in this technical note by working example for an oxidation ditch wastewater treatment plant. Results obtained have demonstrated that essential information can be achieved by carrying out backward uncertainty propagation analysis.

The Machine / Job Features Mechanism

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alef, M.; Cass, T.; Keijser, J. J.

Within the HEPiX virtualization group and the Worldwide LHC Computing Grid’s Machine/Job Features Task Force, a mechanism has been developed which provides access to detailed information about the current host and the current job to the job itself. This allows user payloads to access meta information, independent of the current batch system or virtual machine model. The information can be accessed either locally via the filesystem on a worker node, or remotely via HTTP(S) from a webserver. This paper describes the final version of the specification from 2016 which was published as an HEP Software Foundation technical note, and themore » design of the implementations of this version for batch and virtual machine platforms. We discuss early experiences with these implementations and how they can be exploited by experiment frameworks.« less

The machine/job features mechanism

NASA Astrophysics Data System (ADS)

Alef, M.; Cass, T.; Keijser, J. J.; McNab, A.; Roiser, S.; Schwickerath, U.; Sfiligoi, I.

2017-10-01

Within the HEPiX virtualization group and the Worldwide LHC Computing Grid’s Machine/Job Features Task Force, a mechanism has been developed which provides access to detailed information about the current host and the current job to the job itself. This allows user payloads to access meta information, independent of the current batch system or virtual machine model. The information can be accessed either locally via the filesystem on a worker node, or remotely via HTTP(S) from a webserver. This paper describes the final version of the specification from 2016 which was published as an HEP Software Foundation technical note, and the design of the implementations of this version for batch and virtual machine platforms. We discuss early experiences with these implementations and how they can be exploited by experiment frameworks.

TECHNICAL DESIGN NOTE: Digital proportional-integral-derivative velocity controller of a Mössbauer spectrometer

NASA Astrophysics Data System (ADS)

Pechousek, J.; Prochazka, R.; Mashlan, M.; Jancik, D.; Frydrych, J.

2009-01-01

The digital proportional-integral-derivative (PID) velocity controller used in the Mössbauer spectrometer implemented in field programmable gate array (FPGA) is based on the National Instruments CompactRIO embedded system and LabVIEW graphical programming tools. The system works as a remote system accessible via the Ethernet. The digital controller operates in real-time conditions, and the maximum sampling frequency is approximately 227 kS s-1. The system was tested with standard sample measurements of α-Fe and α-57Fe2O3 on two different electromechanical velocity transducers. The nonlinearities of the velocity scales in the relative form are better than 0.2%. The replacement of the standard analog PID controller by the new system brings the possibility of optimizing the control process more precisely.

Text-Based Decisions: Changes in the Availability of Facts Due to Instructions and the Passage of Time.

DTIC Science & Technology

1982-08-01

8217 , . .. +: Lyle E. lawm. Jr. Departmnoto P hlg University of Colorado Technical Report No. 115 -ONR This research was sponsored’by the Personnel...Technical Report of Facts Due to Instructions and the Passage of Time 6. PERFORMING ORG. REPORT N UMPER ICS Tech Rept. 115 . 7. AUTHOR(a) S. CONTRACT OR...2) no difference in decision accuracy would be noted between the intentional and incidental learning groups, and (3) differential decisional accuracy

Notes on the Early History of Technical Higher

NASA Astrophysics Data System (ADS)

Teodorescu, Horia Nicolai

We perform a brief analysis of the economical and political context of establishing the first technical higher school in Romania. We urge for a revision of the current point of view on the educational level in Yashi (Iaši) and Bucharest at the epoch, highlighting that these were, at the time, important academic centers we may not recognize or may not be aware of today. We also plead for a long due serious approach about the history of early modern education in Romania.

Catalog of Navy Training Courses (CANTRAC). Volume 1. Introductory, General Information and Quota Control Notes

DTIC Science & Technology

1990-01-01

Personnel E-6 and below are allowed BAQ on a case by case basis. NAVAL TECHNICAL TRAINING CENTER DETACHMENT FORT DEVENS , MA 1. SHORT TITLE...NAVTECHTRACENDET FT DEVENS , MA 2. ADDRESS: Officer in Charge, Naval Technical Training Center Detachment, Box 91, Fort Devens , MA 01433-5910 74 3. T9I.EPIONE: Monday...Into the Fort Devens area may place them in extrome financial hardship. 5. AVAILABILITY OF ThANSPORTATION: Both Logan (Boston) and Worcester airports

Catalog of Navy Training Courses (CANTRAC) Introductory, General Information and Quota Control Notes. Volume 1. Revision.

DTIC Science & Technology

1988-01-01

allowed BAQ on a case by case basis. S3 NAVAL TECHNICAL TRAINING CENTER DETACHMENT FORT DEVENS , MA.5 1. SHORT TITLE: NAVTECHTRACENDET FT DEVENS , MA 2...ADDRESS: Chief Petty Officer in Charge, Naval Technical Training Center Detachment, MacArthur Ave., Building 688, Fort Devens , MA 01433-6301 3. TELEPHONE...units are scarce with a high cost of living. 5. AVAILABILITY OF TRANSPORTATION: Worcester is only 25 to 30 miles from Fort Devens with limited air

Study of Membrane Reflector Technology

NASA Technical Reports Server (NTRS)

Knapp, K.; Hedgepeth, J.

1979-01-01

Very large reflective surfaces are required by future spacecraft for such purposes as solar energy collection, antenna surfaces, thermal control, attitude and orbit control with solar pressure, and solar sailing. The performance benefits in large membrane reflector systems, which may be derived from an advancement of this film and related structures technology, are identified and qualified. The results of the study are reported and summarized. Detailed technical discussions of various aspects of the study are included in several separate technical notes which are referenced.

Pesticide Use in the Lake Erie Basin and the Impact of Accelerated Conservation Tillage on Pesticide Use and Runoff Losses.

DTIC Science & Technology

1981-01-01

STATEMENT (of the abstrect entered In Block 20, If different from Report) 1S. SUPPLEMENTARY NOTES Copies are available from National Technical Information...Counter 4 Carbaryl Sevin 5 Chlorpyrifos Lorsban 6 Ethoprop 7 Phorate Thimet 8 Chlordane Chlordane 9 M+M* M+M 10 Methidathion - Malathion and...Lake Erie Basin. LEWMS Technical Report Series. Corps of Engineers, Buffalo District. 6. Liksa, B. J., J. V. Osmun and E. L. Park. 1980. Pesticide use

Optimal Digital Controller Design for a Servo Motor Taking Account of Intersample Behavior

NASA Astrophysics Data System (ADS)

Akiyoshi, Tatsuro; Imai, Jun; Funabiki, Shigeyuki

A continuous-time plant with discretized continuous-time controller do not yield stability if the sampling rate is lower than some certain level. Thus far, high functioning electronic control has made use of high cost hardwares which are needed to implement discretized continuous-time controllers, while low cost hardwares generally do not have high enough sampling rate. This technical note presents results comparing performance indices with and without intersample behavior, and some answer to the question how a low specification device can control a plant effectively. We consider a machine simulating wafer handling robots at semiconductor factories, which is an electromechanical system driven by a direct drive motor. We illustrate controller design for the robot with and without intersample behavior, and simulations and experimental results by using these controllers. Taking intersample behavior into account proves to be effective to make control performance better and enables it to choose relatively long sampling period. By controller design via performance index with intersample behavior, we can cope with situation where short enough sampling period may not be employed, and freedom of controller design might be widened especially on choice of sampling period.

Design and Smartphone-Based Implementation of a Chaotic Video Communication Scheme via WAN Remote Transmission

NASA Astrophysics Data System (ADS)

Lin, Zhuosheng; Yu, Simin; Li, Chengqing; Lü, Jinhu; Wang, Qianxue

This paper proposes a chaotic secure video remote communication scheme that can perform on real WAN networks, and implements it on a smartphone hardware platform. First, a joint encryption and compression scheme is designed by embedding a chaotic encryption scheme into the MJPG-Streamer source codes. Then, multiuser smartphone communications between the sender and the receiver are implemented via WAN remote transmission. Finally, the transmitted video data are received with the given IP address and port in an Android smartphone. It should be noted that, this is the first time that chaotic video encryption schemes are implemented on such a hardware platform. The experimental results demonstrate that the technical challenges on hardware implementation of secure video communication are successfully solved, reaching a balance amongst sufficient security level, real-time processing of massive video data, and utilization of available resources in the hardware environment. The proposed scheme can serve as a good application example of chaotic secure communications for smartphone and other mobile facilities in the future.

Additively manufactured sub-periosteal jaw implants.

PubMed

Mommaerts, M Y

2017-07-01

Severe bone atrophy jeopardizes the success of endosseous implants. This technical note aims to present the innovative concept of additively manufactured sub-periosteal jaw implants (AMSJIs). Digital datasets of the patient's jaws and wax trial in occlusion are used to segment the bone and dental arches, for the design of a sub-periosteal frame and abutments in the optimal location related to the dental arch and for the design of the suprastructure. The implants and suprastructure are three-dimensionally (3D) printed in titanium alloy. The provisional denture is 3D-printed in polymer. AMSJIs offer an alternative approach for patients with extreme jaw bone atrophy. This report refers to the use of this technique for full maxillary rehabilitation, but partial defects in either jaw and extended post-resection defects may also be approached using the same technique. This customized, prosthesis-driven reverse-engineering approach avoids bone grafting and provides immediate functional restoration with one surgical session. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Sensory feedback add-on for upper-limb prostheses.

PubMed

Fallahian, Nader; Saeedi, Hassan; Mokhtarinia, Hamidreza; Tabatabai Ghomshe, Farhad

2017-06-01

Sensory feedback systems have been of great interest in upper-limb prosthetics. Despite tremendous research, there are no commercial modality-matched feedback systems. This article aims to introduce the first detachable and feedback add-on option that can be attached to in-use prostheses. A sensory feedback system was tested on a below-elbow myoelectric prosthesis. The aim was to have the amputee grasp fragile objects without crushing while other accidental feedback sources were blocked. A total of 8 successful trials (out of 10) showed that sensory feedback system decreased the amputee's visual dependency by improving awareness of his prosthesis. Sensory feedback system can be used either as post-fabrication (prosthetic add-on option) or para-fabrication (incorporated into prosthetic design). The use of these direct feedback systems can be explored with a current prosthesis before ordering new high-tech prosthesis. Clinical relevance This technical note introduces the first attach/detach-able sensory feedback system that can simply be added to in-use (myo)electric prosthesis, with no obligation to change prosthesis design or components.

The Roles of Technical Communication Researchers in Design Scholarship

ERIC Educational Resources Information Center

Sánchez, Fernando

2017-01-01

Design has come to be understood as an essential aspect of the work that technical communicators claim. As a result, research in the field of technical communication has approached studies of design in numerous ways. This article showcases how technical communication researchers assume the roles of observers, testers, critics, creators, and…

Development of NASA Technical Standards Program Relative to Enhancing Engineering Capabilities

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.

2003-01-01

The enhancement of engineering capabilities is an important aspect of any organization; especially those engaged in aerospace development activities. Technical Standards are one of the key elements of this endeavor. The NASA Technical Standards Program was formed in 1997 in response to the NASA Administrator s directive to develop an Agencywide Technical Standards Program. The Program s principal objective involved the converting Center-unique technical standards into Agency wide standards and the adoption/endorsement of non-Government technical standards in lieu of government standards. In the process of these actions, the potential for further enhancement of the Agency s engineering capabilities was noted relative to value of being able to access Agencywide the necessary full-text technical standards, standards update notifications, and integration of lessons learned with technical standards, all available to the user from one Website. This was accomplished and is now being enhanced based on feedbacks from the Agency's engineering staff and supporting contractors. This paper addresses the development experiences with the NASA Technical Standards Program and the enhancement of the Agency's engineering capabilities provided by the Program s products. Metrics are provided on significant aspects of the Program.

Annual Report to the Strategic Defense Initiative Organization on the Free-Electron Laser Driven by the NIST CW Microtron

DTIC Science & Technology

1986-05-05

design of the injector for the method selected was completed. A study on the problem of mirror damage has been completed, and commercial suppliers of... mirrors that can withstand the high intracavity power of the FEL have been identified. The design of the room in which the FEL is located has been...Appendices ............ ............................. .25 A. Design Note 10 - Mirror Damage B. Design Note 11 - Wiggler Field Errors C. Design Note 12

Analysis and Implementation of an Electronic Laboratory Notebook in a Biomedical Research Institute

PubMed Central

Dujardin, Gwendal; Cabrera-Andrade, Alejandro; Paz-y-Miño, César; Indacochea, Alberto; Inglés-Ferrándiz, Marta; Nadimpalli, Hima Priyanka; Collu, Nicola; Dublanche, Yann; De Mingo, Ismael; Camargo, David

2016-01-01

Electronic laboratory notebooks (ELNs) will probably replace paper laboratory notebooks (PLNs) in academic research due to their advantages in data recording, sharing and security. Despite several reports describing technical characteristics of ELNs and their advantages over PLNs, no study has directly tested ELN performance among researchers. In addition, the usage of tablet-based devices or wearable technology as ELN complements has never been explored in the field. To implement an ELN in our biomedical research institute, here we first present a technical comparison of six ELNs using 42 parameters. Based on this, we chose two ELNs, which were tested by 28 scientists for a 3-month period and by 80 students via hands-on practical exercises. Second, we provide two survey-based studies aimed to compare these two ELNs (PerkinElmer Elements and Microsoft OneNote) and to analyze the use of tablet-based devices. We finally explore the advantages of using wearable technology as ELNs tools. Among the ELNs tested, we found that OneNote presents almost all parameters evaluated (39/42) and both surveyed groups preferred OneNote as an ELN solution. In addition, 80% of the surveyed scientists reported that tablet-based devices improved the use of ELNs in different respects. We also describe the advantages of using OneNote application for Apple Watch as an ELN wearable complement. This work defines essential features of ELNs that could be used to improve ELN implementation and software development. PMID:27479083

Analysis and Implementation of an Electronic Laboratory Notebook in a Biomedical Research Institute.

PubMed

Guerrero, Santiago; Dujardin, Gwendal; Cabrera-Andrade, Alejandro; Paz-Y-Miño, César; Indacochea, Alberto; Inglés-Ferrándiz, Marta; Nadimpalli, Hima Priyanka; Collu, Nicola; Dublanche, Yann; De Mingo, Ismael; Camargo, David

2016-01-01

Electronic laboratory notebooks (ELNs) will probably replace paper laboratory notebooks (PLNs) in academic research due to their advantages in data recording, sharing and security. Despite several reports describing technical characteristics of ELNs and their advantages over PLNs, no study has directly tested ELN performance among researchers. In addition, the usage of tablet-based devices or wearable technology as ELN complements has never been explored in the field. To implement an ELN in our biomedical research institute, here we first present a technical comparison of six ELNs using 42 parameters. Based on this, we chose two ELNs, which were tested by 28 scientists for a 3-month period and by 80 students via hands-on practical exercises. Second, we provide two survey-based studies aimed to compare these two ELNs (PerkinElmer Elements and Microsoft OneNote) and to analyze the use of tablet-based devices. We finally explore the advantages of using wearable technology as ELNs tools. Among the ELNs tested, we found that OneNote presents almost all parameters evaluated (39/42) and both surveyed groups preferred OneNote as an ELN solution. In addition, 80% of the surveyed scientists reported that tablet-based devices improved the use of ELNs in different respects. We also describe the advantages of using OneNote application for Apple Watch as an ELN wearable complement. This work defines essential features of ELNs that could be used to improve ELN implementation and software development.

Construction cost forecast model : model documentation and technical notes.

DOT National Transportation Integrated Search

2013-05-01

Construction cost indices are generally estimated with Laspeyres, Paasche, or Fisher indices that allow changes : in the quantities of construction bid items, as well as changes in price to change the cost indices of those items. : These cost indices...

Hydrogen embrittlement of structural alloys. A technology survey

NASA Technical Reports Server (NTRS)

Carpenter, J. L., Jr.; Stuhrke, W. F.

1976-01-01

Technical abstracts for about 90 significant documents relating to hydrogen embrittlement of structural metals and alloys are reviewed. Particular note was taken of documents regarding hydrogen effects in rocket propulsion, aircraft propulsion and hydrogen energy systems, including storage and transfer systems.

Figure_2_data

EPA Pesticide Factsheets

Data for Figure 2This dataset is associated with the following publication:Sarwar, G., D. Kang, K. Foley, D. Schwede, B. Gantt, and R. Mathur. Technical note: Examining ozone deposition over seawater. ATMOSPHERIC ENVIRONMENT. Elsevier Science Ltd, New York, NY, USA, 141: 255–262, (2016).

Aeronautical Facilities Catalogue. Volume 1: Wind Tunnels

NASA Technical Reports Server (NTRS)

Penaranda, F. E. (Compiler); Freda, M. S. (Compiler)

1985-01-01

Domestic and foreign wind tunnel facilities are enumerated and their technical parameters are described. Data pertinent to managers and engineers are presented. Facilities judged comparable in testing capability are noted and grouped together. Several comprehensive cross-indexes and charts are included.

Technical note: Examining ozone deposition over seawater

EPA Science Inventory

Surface layer resistance plays an important role in determining ozone deposition velocity over sea-water and can be influenced by chemical interactions at the air-water interface. Here, we examine the effect of chemical interactions of iodide, dimethylsulfide, dissolved organic c...

Urban Data Book : Volume 2. Urban Data - Milwaukee-Washington, Notes and Technical Appendixes

DOT National Transportation Integrated Search

1975-11-01

A quick reference compilation of certain population, socio-economic, employment, and modal split characteristics of the 35 largest Standard Metropolitan Statistical Areas (SMSA) in the United States is presented. The three basic groups of urban data ...

Automation in School Library Media Centers.

ERIC Educational Resources Information Center

Driver, Russell W.; Driver, Mary Anne

1982-01-01

Surveys the historical development of automated technical processing in schools and notes the impact of this automation in a number of cases. Speculations about the future involvement of school libraries in automated processing and networking are included. Thirty references are listed. (BBM)

Primary care physicians’ experiences with electronic medical records

PubMed Central

Ludwick, Dave; Manca, Donna; Doucette, John

2010-01-01

OBJECTIVE To understand how remuneration and care setting affect the implementation of electronic medical records (EMRs). DESIGN Semistructured interviews were used to illicit descriptions from community-based family physicians (paid on a fee-for-service basis) and from urban, hospital, and academic family physicians (remunerated via alternative payment models or sessional pay for activities pertaining to EMR implementation). SETTING Small suburban community and large urban-, hospital-, and academic-based family medicine clinics in Alberta. All participants were supported by a jurisdictional EMR certification funding mechanism. PARTICIPANTS Physicians who practised in 1 or a combination of the above settings and had experience implementing and using EMRs. METHODS Purposive and maximum variation sampling was used to obtain descriptive data from key informants through individually conducted semistructured interviews. The interview guide, which was developed from key findings of our previous literature review, was used in a previous study of community-based family physicians on this same topic. Field notes were analyzed to generate themes through a comparative immersion approach. MAIN FINDINGS Physicians in urban, hospital, and academic settings leverage professional working relationships to investigate EMRs, a resource not available to community physicians. Physicians in urban, hospital, and academic settings work in larger interdisciplinary teams with a greater need for interdisciplinary care coordination, EMR training, and technical support. These practices were able to support the cost of project management or technical support resources. These physicians followed a planned system rollout approach compared with community physicians who installed their systems quickly and required users to transition to the new system immediately. Electronic medical records did not increase, or decrease, patient throughput. Physicians developed ways of including patients in the note-taking process. CONCLUSION We studied physicians’ procurement approaches under various payment models. Our findings do not suggest that one remuneration approach supports EMR adoption any more than another. Rather, this study suggests that stronger physician professional networks used in information gathering, more complete training, and in-house technical support might be more influential than remuneration in facilitating the EMR adoption experience. PMID:20090083

Autopsy-determined causes of death following organ transplantation in 25 patients aged 20 years or younger.

PubMed

Rose, Alan G

2003-01-01

This study aims to examine the autopsy-determined principal and proximate causes of death in 25 patients aged 20 years or younger who died during the 10-year period from 1990 to 1999 after receiving an organ transplant at the University of Minnesota/Fairview-University Medical Center. The autopsy records of this institution were examined for organ transplant recipients who were aged 20 years or younger at the time of their death. In each case, after review of the clinical and pathological data, the principle cause of death (PCOD), as well as the proximate cause of death (PXCOD) were noted. A total of 25 recipient patients were identified (five heart, five lung, five kidney and 10 liver transplants). Seven patients died 30 days or less post-operatively and 18 died thereafter. The following categories of PCOD were encountered: operative/technical complications 28%, most (6/7) being associated with liver transplantation. Infection (24%) and chronic rejection (12%) were other important PCOD. Respiratory complications accounted for 47% of the PCOD. The following categories of PXCOD were noted: technical problems 16%, pulmonary pathology 24%, miscellaneous 32%, acute rejection 4% and nil 20%. This study revealed that technical problems in liver transplants were an important PCOD; respiratory complications and chronic rejection were additional major causes of mortality in this young age group of transplant recipients. Pulmonary pathology and technical problems were the commonest specific groups contributing to the PXCOD.

Design trade-off and proof of concept for LOUPE, the Lunar Observatory for Unresolved Polarimetry of Earth.

PubMed

Hoeijmakers, H J; Arts, M L J; Snik, F; Keller, C U; Kuiper, J M

2016-09-19

We provide a proof of the technical feasibility of LOUPE, the first integral-field snapshot spectropolarimeter, designed to monitor the reflected flux and polarization spectrum of Earth. These are to be used as benchmark data for the retrieval of biomarkers and atmospheric and surface characteristics from future direct observations of exoplanets. We perform a design trade-off for an implementation in which LOUPE performs snapshot integral-field spectropolarimetry at visible wavelengths. We used off-the-shelf optics to construct a polarization modulator, in which polarization information is encoded into the spectrum as a wavelength-dependent modulation, while spatial resolution is maintained using a micro-lens array. The performance of this design concept is validated in a laboratory setup. Our proof-of-concept is capable of measuring a grid of 50 × 50 polarization spectra between 610 and 780 nm of a mock target planet - proving the merit of this design. The measurements are affected by systematic noise on the percent level, and we discuss how to mitigate this in future iterations. We conclude that LOUPE can be small and robust while meeting the science goals of this particular space application, and note the many potential applications that may benefit from our concept for doing snapshot integral-field spectropolarimetry.

Interpersonal Conflict in Collaborative Writing: What We Can Learn from Gender Studies.

ERIC Educational Resources Information Center

Lay, Mary M.

1989-01-01

Discusses how gender studies reveal psychological and cultural sources of interpersonal conflict during collaboration. Notes that an awareness of these conflict sources enables scholars and teachers in technical communication to predict and ease interpersonal conflict among collaborators. (MM)

The accuracy of evidential breath testers at low BACs

DOT National Transportation Integrated Search

1989-05-01

This Technical Note reports on the low blood alcohol concentration (BAC) laboratory testing of seven evidential breath testers widely used by law enforcement. The findings indicated that these devices are just as accurate at low BACs in the 0.020-0.0...

Technical efficiency in milk production in underdeveloped production environment of India*.

PubMed

Bardhan, Dwaipayan; Sharma, Murari Lal

2013-12-01

The study was undertaken in Kumaon division of Uttarakhand state of India with the objective of estimating technical efficiency in milk production across different herd-size category households and factors influencing it. Total of 60 farm households having representation from different herd-size categories drawn from six randomly selected villages of plain and hilly regions of the division constituted the ultimate sampling units of the study. Stochastic frontier production function analysis was used to estimate the technical efficiency in milk production. Multivariate regression equations were fitted taking technical efficiency index as the regressand to identify the factors significantly influencing technical efficiency in milk production. The study revealed that variation in output across farms in the study area was due to difference in their technical efficiency levels. However, it was interesting to note that smallholder producers were more technically efficient in milk production than their larger counterparts, especially in the plains. Apart from herd size, intensity of market participation had significant and positive impact on technical efficiency in the plains. This provides definite indication that increasing the level of commercialization of dairy farms would have beneficial impact on their production efficiency.

Probabilistic delay differential equation modeling of event-related potentials.

PubMed

Ostwald, Dirk; Starke, Ludger

2016-08-01

"Dynamic causal models" (DCMs) are a promising approach in the analysis of functional neuroimaging data due to their biophysical interpretability and their consolidation of functional-segregative and functional-integrative propositions. In this theoretical note we are concerned with the DCM framework for electroencephalographically recorded event-related potentials (ERP-DCM). Intuitively, ERP-DCM combines deterministic dynamical neural mass models with dipole-based EEG forward models to describe the event-related scalp potential time-series over the entire electrode space. Since its inception, ERP-DCM has been successfully employed to capture the neural underpinnings of a wide range of neurocognitive phenomena. However, in spite of its empirical popularity, the technical literature on ERP-DCM remains somewhat patchy. A number of previous communications have detailed certain aspects of the approach, but no unified and coherent documentation exists. With this technical note, we aim to close this gap and to increase the technical accessibility of ERP-DCM. Specifically, this note makes the following novel contributions: firstly, we provide a unified and coherent review of the mathematical machinery of the latent and forward models constituting ERP-DCM by formulating the approach as a probabilistic latent delay differential equation model. Secondly, we emphasize the probabilistic nature of the model and its variational Bayesian inversion scheme by explicitly deriving the variational free energy function in terms of both the likelihood expectation and variance parameters. Thirdly, we detail and validate the estimation of the model with a special focus on the explicit form of the variational free energy function and introduce a conventional nonlinear optimization scheme for its maximization. Finally, we identify and discuss a number of computational issues which may be addressed in the future development of the approach. Copyright © 2016 Elsevier Inc. All rights reserved.

Structural Materials and Fuels for Space Power Plants

NASA Technical Reports Server (NTRS)

Bowman, Cheryl; Busby, Jeremy; Porter, Douglas

2008-01-01

A fission reactor combined with Stirling convertor power generation is one promising candidate in on-going Fission Surface Power (FSP) studies for future lunar and Martian bases. There are many challenges for designing and qualifying space-rated nuclear power plants. In order to have an affordable and sustainable program, NASA and DOE designers want to build upon the extensive foundation in nuclear fuels and structural materials. This talk will outline the current Fission Surface Power program and outline baseline design options for a lunar power plant with an emphasis on materials challenges. NASA first organized an Affordable Fission Surface Power System Study Team to establish a reference design that could be scrutinized for technical and fiscal feasibility. Previous papers and presentations have discussed this study process in detail. Considerations for the reference design included that no significant nuclear technology, fuels, or material development were required for near term use. The desire was to build upon terrestrial-derived reactor technology including conventional fuels and materials. Here we will present an overview of the reference design, Figure 1, and examine the materials choices. The system definition included analysis and recommendations for power level and life, plant configuration, shielding approach, reactor type, and power conversion type. It is important to note that this is just one concept undergoing refinement. The design team, however, understands that materials selection and improvement must be an integral part of the system development.

A qualitative appraisal of stakeholder reactions to a tool for burden of disease-based health system budgeting in Ghana.

PubMed

Awoonor-Williams, John Koku; Schmitt, Margaret L; Tiah, Janet; Ndago, Joyce; Asuru, Rofina; Bawah, Ayaga A; Phillips, James F

2016-01-01

In 2010, the Ghana Health Service launched a program of cooperation with the Tanzania Ministry of Health and Social Welfare that was designed to adapt Tanzania's PLANREP budgeting and reporting tool to Ghana's primary health care program. The product of this collaboration is a system of budgeting, data visualization, and reporting that is known as the District Health Planning and Reporting Tool (DiHPART). This study was conducted to evaluate the design and implementation processes (technical, procedures, feedback, maintenance, and monitoring) of the DiHPART tool in northern Ghana. This paper reports on a qualitative appraisal of user reactions to the DiHPART system and implications of pilot experience for national scale-up. A total of 20 health officials responsible for financial planning operations were drawn from the national, regional, and district levels of the health system and interviewed in open-ended discussions about their reactions to DiHPART and suggestions for systems development. The findings show that technical shortcomings merit correction before scale-up can proceed. The review makes note of features of the software system that could be developed, based on experience gained from the pilot. Changes in the national system of financial reporting and budgeting complicate DiHPART utilization. This attests to the importance of pursuing a software application framework that anticipates the need for automated software generation. Despite challenges encountered in the pilot, the results lend support to the notion that evidence-based budgeting merits development and implementation in Ghana.

A minimally invasive technique for percutaneous lumbar facet augmentation: Technical description of a novel device

PubMed Central

Smith, Zachary A.; Armin, Sean; Raphael, Dan; Khoo, Larry T.

2011-01-01

Background: We describe a new posterior dynamic stabilizing system that can be used to augment the mechanics of the degenerating lumbar segment. The mechanism of this system differs from other previously described surgical techniques that have been designed to augment lumbar biomechanics. The implant and technique we describe is an extension-limiting one, and it is designed to support and cushion the facet complex. Furthermore, it is inserted through an entirely percutaneous technique. The purpose of this technical note is to demonstrate a novel posterior surgical approach for the treatment of lumbar degenerative. Methods: This report describes a novel, percutaneously placed, posterior dynamic stabilization system as an alternative option to treat lumbar degenerative disk disease with and without lumbar spinal stenosis. The system does not require a midline soft-tissue dissection, nor subperiosteal dissection, and is a truly minimally invasive means for posterior augmentation of the functional facet complex. This system can be implanted as a stand-alone procedure or in conjunction with decompression procedures. Results: One-year clinical results in nine individual patients, all treated for degenerative disease of the lower lumbar spine, are presented. Conclusions: This novel technique allows for percutaneous posterior dynamic stabilization of the lumbar facet complex. The use of this procedure may allow a less invasive alternative to traditional approaches to the lumbar spine as well as an alternative to other newly developed posterior dynamic stabilization systems. PMID:22145084

The evaluator as technical assistant: A model for systemic reform support

NASA Astrophysics Data System (ADS)

Century, Jeanne Rose

This study explored evaluation of systemic reform. Specifically, it focused on the evaluation of a systemic effort to improve K-8 science, mathematics and technology education. The evaluation was of particular interest because it used both technical assistance and evaluation strategies. Through studying the combination of these roles, this investigation set out to increase understanding of potentially new evaluator roles, distinguish important characteristics of the evaluator/project participant relationship, and identify how these roles and characteristics contribute to effective evaluation of systemic science education reform. This qualitative study used interview, document analysis, and participant observation as methods of data collection. Interviews were conducted with project leaders, project participants, and evaluators and focused on the evaluation strategies and process, the use of the evaluation, and technical assistance. Documents analyzed included transcripts of evaluation team meetings and reports, memoranda and other print materials generated by the project leaders and the evaluators. Data analysis consisted of analytic and interpretive procedures consistent with the qualitative data collected and entailed a combined process of coding transcripts of interviews and meetings, field notes, and other documents; analyzing and organizing findings; writing of reflective and analytic memos; and designing and diagramming conceptual relationships. The data analysis resulted in the development of the Multi-Function Model for Systemic Reform Support. This model organizes systemic reform support into three functions: evaluation, technical assistance, and a third, named here as "systemic perspective." These functions work together to support the project's educational goals as well as a larger goal--building capacity in project participants. This model can now serve as an informed starting point or "blueprint" for strategically supporting systemic reform.

The Facilitator. Technical Note No. 11.

ERIC Educational Resources Information Center

Barriga, Patricio; And Others

This paper describes the concept, training, and experiences of community facilitators as change agents in a nonformal education project in rural Ecuador. Presently, the social, economic, and political context of the rural Ecuadorian consists of poverty, racial prejudice, economic exploitation, and psychological dependency. The project attempted to…

Airline Flight Crew Technical Corrections Act

THOMAS, 111th Congress

Rep. Bishop, Timothy H. [D-NY-1

2009-02-09

House - 03/23/2009 Referred to the Subcommittee on Workforce Protections. (All Actions) Notes: For further action, see S.1422, which became Public Law 111-119 on 12/21/2009. Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation:

Issues in Television-Centered Instruction for Adults.

ERIC Educational Resources Information Center

Richardson, Penelope L.

1983-01-01

Discusses trends in adult education and their implications for instructional developers, and notes areas where reviews of research are needed: existing telecourse packages, recruitment and retention of adult learners, effective instructional strategies, logistics and costs of alternate delivery systems, and technical assistance and training needs…

Burning behavior within a seat armrest cavity

DOT National Transportation Integrated Search

2002-09-01

The purpose of this technical note is to document the results of fire tests conducted to examine the characteristics of fire that may occur in the cavity of an aircraft seat armrest and the fire-containment capacity of the cavity. In all the tests th...

GENERATION AND CONTROL OF AIR POLLUTANTS FROM ORIMULSION (R) COMBUSTION

EPA Science Inventory

The paper discusses a study requested in 1997 by the U.S. Congress to provide technical information regarding Orimulsion (R) and its environmental impacts. (NOTE: Orimulsion is an emulsified fuel, composed of approximately 70% Venezuelan bitumen, 30% water, and trace amounts of ...

Enhancing Electrical Troubleshooting Skills in a Computer-Coached Practice Environment.

ERIC Educational Resources Information Center

Johnson, Scott D.; And Others

1993-01-01

This study examines the effect of the "Technical Troubleshooting Tutor," a computer-coached training program, on aircraft electrical system troubleshooting. Performance ability differences between control groups are noted, and troubleshooting models and flow diagram examples are included. The study demonstrates the possibilities for…

Technical Note: Estimation of Micro-Watershed Topographic Parameters Using Earth Observatory Tools

EPA Science Inventory

The study set out to analyze the feasibility of using Earth observatory tools to derive elevations to characterize topographic parameters of slope gradient and area useful in predicting erosion and for natural resources engineering education and instruction. Earth obseravtory too...

Sandia Pueblo Settlement Technical Amendment Act

THOMAS, 113th Congress

Rep. Lujan Grisham, Michelle [D-NM-1

2013-11-21

House - 04/01/2014 Placed on the Union Calendar, Calendar No. 295. (All Actions) Notes: For further action, see S.611, which became Public Law 113-119 on 6/9/2014. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

REVIEW OF CONTROL OPTIONS FOR METHYL BROMIDE IN COMMODITY TREATMENT

EPA Science Inventory

The report describes recent developments in the control of methyl bromide (MeBr) and discusses technical considerations and requirements for and economic feasibility of recovery. (NOTE: MeBr, fumigant for agricultural commodities, is an ozone depleting chemical. The U.S. EPA has ...

15 CFR 290.6 - Proposal evaluation and selection criteria.

Code of Federal Regulations, 2012 CFR

2012-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL.... (a) In making a decision whether to provide financial support, NIST shall review and evaluate all... NIST research results and expertise in the technical areas noted in these procedures? (3) Technology...

15 CFR 290.6 - Proposal evaluation and selection criteria.

Code of Federal Regulations, 2013 CFR

2013-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL.... (a) In making a decision whether to provide financial support, NIST shall review and evaluate all... NIST research results and expertise in the technical areas noted in these procedures? (3) Technology...

15 CFR 290.6 - Proposal evaluation and selection criteria.

Code of Federal Regulations, 2014 CFR

2014-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL.... (a) In making a decision whether to provide financial support, NIST shall review and evaluate all... NIST research results and expertise in the technical areas noted in these procedures? (3) Technology...

Job Prospects for Computer Engineers.

ERIC Educational Resources Information Center

Basta, Nicholas

1988-01-01

Discusses the computer engineering industry in the United States. Recounts recent shifts in the computer industry and notes that despite foreign competition, the industry offers graduating computer engineers ample opportunities for employment. Claims that skill and technical knowledge are the most important assets for getting a job. (TW)

Review of USGS Open-file Report 95-525 ("Cartographic and digital standard for geologic map information") and plans for development of Federal draft standards for geologic map information

USGS Publications Warehouse

Soller, David R.

1996-01-01

This report summarizes a technical review of USGS Open-File Report 95-525, 'Cartographic and Digital Standard for Geologic Map Information' and OFR 95-526 (diskettes containing digital representations of the standard symbols). If you are considering the purchase or use of those documents, you should read this report first. For some purposes, OFR 95-525 (the printed document) will prove to be an excellent resource. However, technical review identified significant problems with the two documents that will be addressed by various Federal and State committees composed of geologists and cartographers, as noted below. Therefore, the 2-year review period noted in OFR 95-525 is no longer applicable. Until those problems are resolved and formal standards are issued, you may consult the following World-Wide Web (WWW) site which contains information about development of geologic map standards: URL: http://ncgmp.usgs.gov/ngmdbproject/home.html

Influenceable and Avoidable Risk Factors for Systemic Air Embolism due to Percutaneous CT-Guided Lung Biopsy: Patient Positioning and Coaxial Biopsy Technique—Case Report, Systematic Literature Review, and a Technical Note

PubMed Central

2014-01-01

Following the first case of a systemic air embolism due to percutaneous CT-guided lung biopsy in our clinic we analysed the literature regarding this matter in view of influenceable or avoidable risk factors. A systematic review of literature reporting cases of systemic air embolism due to CT-guided lung biopsy was performed to find out whether prone positioning might be a risk factor regarding this issue. In addition, a technical note concerning coaxial biopsy practice is presented. Prone position seems to have relevance for the development and/or clinical manifestation of air embolism due to CT-guided lung biopsy and should be considered a risk factor, at least as far as lesions in the lower parts of the lung are concerned. Biopsies of small or cavitary lesions in coaxial technique should be performed using a hemostatic valve. PMID:25431666

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bailey, David H.

In a previous humorous note entitled 'Twelve Ways to Fool the Masses,' I outlined twelve common ways in which performance figures for technical computer systems can be distorted. In this paper and accompanying conference talk, I give a reprise of these twelve 'methods' and give some actual examples that have appeared in peer-reviewed literature in years past. I then propose guidelines for reporting performance, the adoption of which would raise the level of professionalism and reduce the level of confusion, not only in the world of device simulation but also in the larger arena of technical computing.

Initial Training and Skill Remediation Materials for Performance-Based Assessment Technology at the Precommissioning Level

DTIC Science & Technology

1982-06-01

PRECOMMISSIONING LEVEL LEADERSHIP AND MANAGEMENT TECHNICAL AREA j~~t SIECP NOV 30 1983 U.S.ARMYRESERCHISTIUTEO STAThMEN EAVOA dSCILCENS 14’ 4..3...different fro Repo") 1IL SUPPLEMENTARY NOTES 19. KEMY WORDS (Cmntii’uen reyes old@ I n.eeemsa mul Idefltl by block nmbei~r) Army ROTC Management skills...performed by personnel from the Leadership and Management Technical Area under Army Project 2Q- 263731A792, in response to special requirements of the

Creating protective appliances for preventing dental injury during endotracheal intubation using intraoral scanning and 3D printing: a technical note

PubMed Central

Cho, Jin-Hyung; Park, Wonse; Park, Kyeong-Mee; Kim, Seo-Yul

2017-01-01

Digital dentistry has influenced many dental procedures, such as three-dimensional (3D) diagnosis and treatment planning, surgical splints, and prosthetic treatments. Patient-specific protective appliances (PSPAs) prevent dental injury during endotracheal intubation. However, the required laboratory work takes time, and there is the possibility of tooth extraction while obtaining the dental impression. In this technical report, we utilized new digital technology for creating PSPAs, using direct intraoral scanners and 3D printers for dental cast fabrication. PMID:28879329

Creating protective appliances for preventing dental injury during endotracheal intubation using intraoral scanning and 3D printing: a technical note.

PubMed

Cho, Jin-Hyung; Park, Wonse; Park, Kyeong-Mee; Kim, Seo-Yul; Kim, Kee-Deog

2017-03-01

Digital dentistry has influenced many dental procedures, such as three-dimensional (3D) diagnosis and treatment planning, surgical splints, and prosthetic treatments. Patient-specific protective appliances (PSPAs) prevent dental injury during endotracheal intubation. However, the required laboratory work takes time, and there is the possibility of tooth extraction while obtaining the dental impression. In this technical report, we utilized new digital technology for creating PSPAs, using direct intraoral scanners and 3D printers for dental cast fabrication.

Advanced composites technology program

NASA Technical Reports Server (NTRS)

Davis, John G., Jr.

1993-01-01

This paper provides a brief overview of the NASA Advanced Composites Technology (ACT) Program. Critical technology issues that must be addressed and solved to develop composite primary structures for transport aircraft are delineated. The program schedule and milestones are included. Work completed in the first 3 years of the program indicates the potential for achieving composite structures that weigh less and are cost effective relative to conventional aluminum structure. Selected technical accomplishments are noted. Readers who are seeking more in-depth technical information should study the other papers included in these proceedings.

NASA thesaurus alphabetical update: Subject terms for indexing scientific and technical information

NASA Technical Reports Server (NTRS)

1971-01-01

The NASA THESAURUS - ALPHABETICAL UPDATE is an alphabetical listing of all subject terms (postable and nonpostable) that are currently approved for use in the NASA scientific and technical information system. Contained in the listing are the subject terms that were listed in the Preliminary Edition of the NASA THESAURUS and the additional subject terms that were approved during the period January 1, 1967 June 30, 1971. Complete Thesaurus structuring, including scope notes, category assignments, and cross-references, is provided for each term as appropriate.

Hygrothermal Effects in Continuous Fibre Reinforced Composites. Part I. Thermal and Moisture Diffusion in Composite Materials (Effets Hygrothermiques dans les Composites a Renfort de Fibre Continu. Partie I. Diffusion de L’Humidite et de la Chaleur dans les Materiaux Composites)

DTIC Science & Technology

1983-01-01

considered important, complete, and a lasting contribution to existing knowledge. -’ Mechanical Engineering Reports (MS): Scientific and technical information...pertaining to investigations outside aeronautics considered important, complete, and a lasting contribution to existing knowledge. * AERONAUTICAL...NOTES (AN): Information les~s broad in scope but nevertheless of importance as a * contribution to existing knowledge. LABORATORY TECHNICAL REPORTS (LTR

A Method To Determine the Kinetics of Solute Mixing in Liquid/Liquid Formulation Dual-Chamber Syringes.

PubMed

Werk, Tobias; Mahler, Hanns-Christian; Ludwig, Imke Sonja; Luemkemann, Joerg; Huwyler, Joerg; Hafner, Mathias

Dual-chamber syringes were originally designed to separate a solid substance and its diluent. However, they can also be used to separate liquid formulations of two individual drug products, which cannot be co-formulated due to technical or regulatory issues. A liquid/liquid dual-chamber syringe can be designed to achieve homogenization and mixing of both solutions prior to administration, or it can be used to sequentially inject both solutions. While sequential injection can be easily achieved by a dual-chamber syringe with a bypass located at the needle end of the syringe barrel, mixing of the two fluids may provide more challenges. Within this study, the mixing behavior of surrogate solutions in different dual-chamber syringes is assessed. Furthermore, the influence of parameters such as injection angle, injection speed, agitation, and sample viscosity were studied. It was noted that mixing was poor for the commercial dual-chamber syringes (with a bypass designed as a longitudinal ridge) when the two liquids significantly differ in their physical properties (viscosity, density). However, an optimized dual-chamber syringe design with multiple bypass channels resulted in improved mixing of liquids. Dual-chamber syringes were originally designed to separate a solid substance and its diluent. However, they can also be used to separate liquid formulations of two individual drug products. A liquid/liquid dual-chamber syringe can be designed to achieve homogenization and mixing of both solutions prior to administration, or it can be used to sequentially inject both solutions. While sequential injection can be easily achieved by a dual-chamber syringe with a bypass located at the needle end of the syringe barrel, mixing of the two fluids may provide more challenges. Within this study, the mixing behavior of surrogate solutions in different dual-chamber syringes is assessed. Furthermore, the influence of parameters such as injection angle, injection speed, agitation, and sample viscosity were studied. It was noted that mixing was poor for the commercially available dual-chamber syringes when the two liquids significantly differ in viscosity and density. However, an optimized dual-chamber syringe design resulted in improved mixing of liquids. © PDA, Inc. 2017.

Liner for extrusion billet containers. Interim Technical Documentary Progress Report, February 1--April 30, 1963

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spachner, S. A.

1963-05-01

A shrink-fit assembly device for buildup of ceramiccoated liner and sleeve assemblies was tested and modified to develop desired temperatures and suitable heat distribution in sleeves, which were heated. Nine different compositions of fiber metal reinforced ceramic compacts were produced for preliminary evaluation of suitability for extrusion liner use. Procedures were developed for welding short, hollow ceramic cylinders of high-strength metal carbides and borides to form a ceramic extrusion liner of suitable length. Dissassembly tooling for rapid separation of shrink-fitted sleeves from a worn liner was designed, fabricated, and tested. Preliminary extrusion testing of an alumina-coated liner was carried out,more » using SAE 4340 steel billets extruded to rod at 12 : 1 and 16 : 1 ratios. No coating wear was noted after extrusion of 3 billets. (auth)« less

A bill to amend the African Growth and Opportunity Act to extend the third-country fabric program and to add South Sudan to the list of countries eligible for designation under that Act, to make technical corrections to the Harmonized Tariff Schedule of the United States relating to the textile and apparel rules of origin for the Dominican Republic-Central America-United States Free Trade Agreement, to approve the renewal of import restrictions contained in the Burmese Freedom and Democracy Act of 2003, and for other purposes.

THOMAS, 112th Congress

Sen. Baucus, Max [D-MT

2012-06-21

Senate - 09/20/2012 By Senator Baucus from Committee on Finance filed written report. Report No. 112-225. Additional views filed. (All Actions) Notes: For further action, see H.R.5986, which became Public Law 112-163 on 8/10/2012. Tracker: This bill has the status Passed SenateHere are the steps for Status of Legislation:

The Search for Braddock's Caldera-Guidebook for Colorado Scientific Society Fall 2008 Field Trip, Never Summer Mountains, Colorado

USGS Publications Warehouse

Cole, James C.; Larson, Ed; Farmer, Lang; Kellogg, Karl S.

2008-01-01

The report contains the illustrated guidebook that was used for the fall field trip of the Colorado Scientific Society on September 6-7, 2008. It summarizes new information about the Tertiary geologic history of the northern Front Range and the Never Summer Mountains, particularly the late Oligocene volcanic and intrusive rocks designated the Braddock Peak complex. Minor modifications were made in response to technical reviews by D.J. Lidke and C.A. Ruleman (U.S. Geological Survey) regarding clarity and consistency, and text editing by M.A. Kidd. However, the text remains essentially similar to the guidebook that was circulated to the participants on the Colorado Scientific Society 2008 field trip. Several notes were added following the trip (as indicated) to address developments since the guidebook was written.

Problems in creation of modern air inlet filters of power gas turbine plants in Russia and methods of their solving

NASA Astrophysics Data System (ADS)

Mikhaylov, V. E.; Khomenok, L. A.; Sherapov, V. V.

2016-08-01

The main problems in creation and operation of modern air inlet paths of gas turbine plants installed as part of combined-cycle plants in Russia are presented. It is noted that design features of air inlet filters shall be formed at the stage of the technical assignment not only considering the requirements of gas turbine plant manufacturer but also climatic conditions, local atmospheric air dustiness, and a number of other factors. The recommendations on completing of filtration system for air inlet filter of power gas turbine plants depending on the facility location are given, specific defects in design and experience in operation of imported air inlet paths are analyzed, and influence of cycle air preparation quality for gas turbine plant on value of operating expenses and cost of repair works is noted. Air treatment equipment of various manufacturers, influence of aerodynamic characteristics on operation of air inlet filters, features of filtration system operation, anti-icing system, weather canopies, and other elements of air inlet paths are considered. It is shown that nonuniformity of air flow velocity fields in clean air chamber has a negative effect on capacity and aerodynamic resistance of air inlet filter. Besides, the necessity in installation of a sufficient number of differential pressure transmitters allowing controlling state of each treatment stage not being limited to one measurement of total differential pressure in the filtration system is noted in the article. According to the results of the analysis trends and methods for modernization of available equipment for air inlet path, the importance of creation and implementation of new technologies for manufacturing of filtering elements on sites of Russia within the limits of import substitution are given, and measures on reliability improvement and energy efficiency for air inlet filter are considered.

Reformation of Regulatory Technical Standards for Nuclear Power Generation Equipments in Japan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mikio Kurihara; Masahiro Aoki; Yu Maruyama

2006-07-01

Comprehensive reformation of the regulatory system has been introduced in Japan in order to apply recent technical progress in a timely manner. 'The Technical Standards for Nuclear Power Generation Equipments', known as the Ordinance No.622) of the Ministry of International Trade and Industry, which is used for detailed design, construction and operating stage of Nuclear Power Plants, was being modified to performance specifications with the consensus codes and standards being used as prescriptive specifications, in order to facilitate prompt review of the Ordinance with response to technological innovation. The activities on modification were performed by the Nuclear and Industrial Safetymore » Agency (NISA), the regulatory body in Japan, with support of the Japan Nuclear Energy Safety Organization (JNES), a technical support organization. The revised Ordinance No.62 was issued on July 1, 2005 and is enforced from January 1 2006. During the period from the issuance to the enforcement, JNES carried out to prepare enforceable regulatory guide which complies with each provisions of the Ordinance No.62, and also made technical assessment to endorse the applicability of consensus codes and standards, in response to NISA's request. Some consensus codes and standards were re-assessed since they were already used in regulatory review of the construction plan submitted by licensee. Other consensus codes and standards were newly assessed for endorsement. In case that proper consensus code or standards were not prepared, details of regulatory requirements were described in the regulatory guide as immediate measures. At the same time, appropriate standards developing bodies were requested to prepare those consensus code or standards. Supplementary note which provides background information on the modification, applicable examples etc. was prepared for convenience to the users of the Ordinance No. 62. This paper shows the activities on modification and the results, following the NISA's presentation at ICONE-13 that introduced the framework of the performance specifications and the modification process of the Ordinance NO. 62. (authors)« less

6 CFR 27.120 - Designation of a coordinating official; Consultations and technical assistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... covered facility shall submit a written request for consultation or technical assistance to the...; Consultations and technical assistance. 27.120 Section 27.120 Domestic Security DEPARTMENT OF HOMELAND SECURITY... coordinating official; Consultations and technical assistance. (a) The Assistant Secretary will designate a...

Minilaparoscopy-assisted transumbilical laparoscopic cholecystectomy.

PubMed

Lima, Geraldo José DE Souza; Leite, Rodrigo Fabiano Guedes; Abras, Gustavo Munayer; Pires, Livio José Suretti; Castro, Eduardo Godoy

2016-01-01

The role of laparoscopy in the modern surgery era is well established. With the prospect of being able to improve the already privileged current situation, new alternatives have been proposed, such as natural orifice endoscopic surgery (NOTES), the method for single transumbilical access (LESS - Laparo-endoscopic single-site surgery) and minilaparoscopy (MINI). The technique proposed by the authors uses a laparoscope with an operative channel like the flexible endoscope used in NOTES. All operative times are carried out through the umbilical trocar as in LESS, and assisted by a minilaparoscopy grasper. This new technic combines, and results from, the rationalization of technical particularities and synergy of these three approaches, seeking to join their advantages and minimize their disadvantages. RESUMO O papel da videolaparoscopia na era moderna da cirurgia encontra-se bem estabelecido. Com a perspectiva de ser possível melhorar a já privilegiada situação atual, novas alternativas têm sido propostas, como a cirurgia por orifícios naturais (NOTES), o método por acesso único transumbilical (LESS - Laparo-endoscopic single-site surgery) e a minilaparoscopia (MINI). A técnica proposta pelos autores utiliza-se de óptica com canal de trabalho como o endoscópio flexível do NOTES, executa-se todos os tempos operatórios pelo trocarte umbilical, como no LESS, e é assistido por pinça de minilaparoscopia. Esta nova técnica combina e resulta da racionalização de particularidades técnicas e do sinergismo destas três abordagens, buscando agregar suas vantagens e minimizar as suas desvantagens.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stout, D.K.

Flaws are noted in equilibrium growth models which ignore the facts that labor is no longer homogeneous, national governments can no longer guarantee a managed demand, and technical progress is not an independent force. The pace of technical progress is the major variable and increases with competition and certainty in the growth of demand. The outlook for technical progress is examined in the context of productivity, using microprocessor development for illustration. The author takes an optimistic view of new developments in that they do not bring the self-destructive possibility of overpopulation, irreversible damage to the environment, or nuclear war anymore » closer, while having a positive chance to promote a more rewarding relationship between education, work, and life style. The opportunities for positive humanistic changes through microprocessing are confirmed. (DCK)« less

[Value of ultrasonically-guided liver puncture biopsy in the diagnosis of primary liver cancer. Apropos of 84 cases].

PubMed

Peghini, M; Eynard, J P; Vergne, R; Seurat, P; Barabe, P; Aubry, P; Diallo, A; Gueye, P M

1987-01-01

Ultrasonographicaly guided fine needle aspiration of liver was performed in 84 patients having a confirmed HCC. This technics utilizes a CHIBA type fine needle, after blood coagulation tests have been checked. Out of 84 fine needle aspirations performed: 64 were positive (76,2%), 9 negative (10,7%), 11 (13,19%) were questionable (6) or nonanalysable (5). It is ascertained that the sensibility of this technics is over 75%. It should be possible to improve it by repeating such an exam in previously negative patients. The causes of failure are discussed. Tolerance of the technics is good. It is attraumatic, and of very easily performance. No accident, no mishap was noted.

19 CFR 115.30 - Technical requirements for containers by design type.

Code of Federal Regulations, 2011 CFR

2011-04-01

... SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.30 Technical... 19 Customs Duties 1 2011-04-01 2011-04-01 false Technical requirements for containers by design...

19 CFR 115.30 - Technical requirements for containers by design type.

Code of Federal Regulations, 2012 CFR

2012-04-01

... SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.30 Technical... 19 Customs Duties 1 2012-04-01 2012-04-01 false Technical requirements for containers by design...

19 CFR 115.30 - Technical requirements for containers by design type.

Code of Federal Regulations, 2014 CFR

2014-04-01

... SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.30 Technical... 19 Customs Duties 1 2014-04-01 2014-04-01 false Technical requirements for containers by design...

19 CFR 115.30 - Technical requirements for containers by design type.

Code of Federal Regulations, 2010 CFR

2010-04-01

... SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.30 Technical... 19 Customs Duties 1 2010-04-01 2010-04-01 false Technical requirements for containers by design...

19 CFR 115.30 - Technical requirements for containers by design type.

Code of Federal Regulations, 2013 CFR

2013-04-01

... SECURITY; DEPARTMENT OF THE TREASURY CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.30 Technical... 19 Customs Duties 1 2013-04-01 2013-04-01 false Technical requirements for containers by design...

48 CFR 1052.201-70 - Contracting Officer's Technical Representative (COTR) Designation and Authority.

Code of Federal Regulations, 2010 CFR

2010-10-01

... in writing. The term “technical direction” includes, without limitation, direction to the contractor... the actions of the contractor's employees. (d) Technical direction may be oral or in writing. The COTR... Technical Representative (COTR) Designation and Authority. 1052.201-70 Section 1052.201-70 Federal...

For ELLs: Vocabulary beyond the Definitions

ERIC Educational Resources Information Center

Roberts, Nancy S.; Truxaw, Mary P.

2013-01-01

In this article, a classroom teacher discusses ambiguities in mathematics vocabulary and strategies for ELL students in building understanding. The authors note that mathematics vocabulary may be more difficult to learn than other academic vocabulary for several reasons: (1) definitions are filled with technical vocabulary, symbols, and diagrams;…

The Neurobiological Basis of Reading.

ERIC Educational Resources Information Center

Joseph, Jane; Noble, Kimberly; Eden, Guinevere

2001-01-01

This paper reviews studies using positron emission tomography and functional magnetic resonance imaging in adults to study the reading process and notes that general networks of regions seem to be uniquely associated with different components of the reading process. Findings are evaluated in light of technical and experimental limitations and…

Virtual Reality, Combat, and Communication.

ERIC Educational Resources Information Center

Thrush, Emily Austin; Bodary, Michael

2000-01-01

Presents a brief examination of the evolution of virtual reality devices that illustrates how the development of this new medium is influenced by emerging technologies and by marketing pressures. Notes that understanding these influences may help prepare for the role of technical communicators in building virtual reality applications for education…

Tax Technical Corrections Act of 2014

THOMAS, 113th Congress

Rep. Camp, Dave [R-MI-4

2014-09-18

House - 09/18/2014 Referred to the House Committee on Ways and Means. (All Actions) Notes: For further action, see H.R.5771, which became Public Law 113-295 on 12/19/2014. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Fotonovela. Technical Note No. 13.

ERIC Educational Resources Information Center

Barriga, Patricio; Villacis, Rodrigo

This report contains a description of a program that sought to develop the fotonovela as an instrument for increasing literacy and consciousness awareness in Ecuador. Following a general introduction to the work of the Nonformal Education Project, the creator of this program, the report presents information about the antecedents and…

TECHNICAL NOTE: PERFORMANCE OF A PERSONAL ELECTROSTATIC PRECIPITATOR PARTICLE SAMPLER

EPA Science Inventory

Filter-based methods used to measure aerosols with semi-volatile constituents are subject to biases from adsorption and volatilization that may occur during sampling (McDow et al., 1990, Turpin et al., 1994, Volckens et al., 1999; Tolocka et al. 2001). The development and eval...

Technical note: stress analysis of cellulosic-manure composites

Treesearch

Y.H. Ro; J.F. Hunt; R.E. Rowlands

2017-01-01

Ability to determine stresses in loaded, perforated cellulosic-manure composites from recorded temperature information was demonstrated. Being able to stress analyze such green materials addresses several societal issues. These include providing engineering members fabricated from materials that are suitable for developed and developing nations, relieving a troubling...

9. SITE BUILDING 002 SCANNER BUILDING LOOKING AT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. SITE BUILDING 002 - SCANNER BUILDING - LOOKING AT "C" FACE RADAR SYSTEM EMITTER/ANTENNA. VIEW IS LOOKING SOUTH 30° EAST (NOTE: "C" FACE NOT IN USE AT FACILITY). - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Trademark Technical and Conforming Amendment Act of 2010

THOMAS, 111th Congress

Rep. Conyers, John, Jr. [D-MI-14

2010-01-26

House - 01/26/2010 Referred to the House Committee on the Judiciary. (All Actions) Notes: For further action, see S.2968, which became Public Law 111-146 on 3/17/2010. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Apprentice and Trainee Destinations 2010: Technical Notes. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

"Apprentice and Trainee Destinations" presents information about the destinations of apprentices and trainees approximately nine months after leaving their training. Information in this publication is derived from the Apprentice and Trainee Destinations Survey that covered apprentices and trainees who, between April and June 2009, either…

Technical Note: Stored grain volume measurement using a low density point cloud

USDA-ARS?s Scientific Manuscript database

The mass of stored grain is often determined from volume measurements by crop insurers, government auditors, and stored grain managers conducting inventories. Recent increases in bin size have accentuated the difficulty of accounting for irregularities and variations in surface conditions in calcula...

Exploring the Universe: An Introductory Bibliography in Astronomy.

ERIC Educational Resources Information Center

Fraknoi, Andrew

Arranged in five sections, this annotated bibliography cites over 40 introductory level resources on astronomy published between 1972 and 1981. A note on the availability of these resources precedes sections covering general introductory books, magazines featuring non-technical articles, general books for readers with slight background,…

Marshall Team Recreates Goddard Rocket

NASA Technical Reports Server (NTRS)

2003-01-01

In honor of the Centernial of Flight celebration and commissioned by the American Institute of Aeronautics and Astronautics (AIAA), a team of engineers from Marshall Space Flight Center (MSFC) built a replica of the first liquid-fueled rocket. The original rocket, designed and built by rocket engineering pioneer Robert H. Goddard in 1926, opened the door to modern rocketry. Goddard's rocket reached an altitude of 41 feet while its flight lasted only 2.5 seconds. The Marshall design team's plan was to stay as close as possible to an authentic reconstruction of Goddard's rocket. The same propellants were used - liquid oxygen and gasoline - as available during Goddard's initial testing and firing. The team also tried to construct the replica using the original materials and design to the greatest extent possible. By purposely using less advanced techniques and materials than many that are available today, the team encountered numerous technical challenges in testing the functional hardware. There were no original blueprints or drawings, only photographs and notes. However, this faithful adherence to historical accuracy has also allowed the team to experience many of the same challenges Goddard faced 77 years ago, and more fully appreciate the genius of this extraordinary man. The replica will undergo ground tests at MSFC this summer.

Around Marshall

NASA Image and Video Library

2003-07-01

In honor of the Centernial of Flight celebration and commissioned by the American Institute of Aeronautics and Astronautics (AIAA), a team of engineers from Marshall Space Flight Center (MSFC) built a replica of the first liquid-fueled rocket. The original rocket, designed and built by rocket engineering pioneer Robert H. Goddard in 1926, opened the door to modern rocketry. Goddard's rocket reached an altitude of 41 feet while its flight lasted only 2.5 seconds. The Marshall design team's plan was to stay as close as possible to an authentic reconstruction of Goddard's rocket. The same propellants were used - liquid oxygen and gasoline - as available during Goddard's initial testing and firing. The team also tried to construct the replica using the original materials and design to the greatest extent possible. By purposely using less advanced techniques and materials than many that are available today, the team encountered numerous technical challenges in testing the functional hardware. There were no original blueprints or drawings, only photographs and notes. However, this faithful adherence to historical accuracy has also allowed the team to experience many of the same challenges Goddard faced 77 years ago, and more fully appreciate the genius of this extraordinary man. The replica will undergo ground tests at MSFC this summer.

[Design of visualized medical images network and web platform based on MeVisLab].

PubMed

Xiang, Jun; Ye, Qing; Yuan, Xun

2017-04-01

With the trend of the development of "Internet +", some further requirements for the mobility of medical images have been required in the medical field. In view of this demand, this paper presents a web-based visual medical imaging platform. First, the feasibility of medical imaging is analyzed and technical points. CT (Computed Tomography) or MRI (Magnetic Resonance Imaging) images are reconstructed three-dimensionally by MeVisLab and packaged as X3D (Extensible 3D Graphics) files shown in the present paper. Then, the B/S (Browser/Server) system specially designed for 3D image is designed by using the HTML 5 and WebGL rendering engine library, and the X3D image file is parsed and rendered by the system. The results of this study showed that the platform was suitable for multiple operating systems to realize the platform-crossing and mobilization of medical image data. The development of medical imaging platform is also pointed out in this paper. It notes that web application technology will not only promote the sharing of medical image data, but also facilitate image-based medical remote consultations and distance learning.

GPHS RTGs in Support of the Cassini RTG Program. Final Technical Report, January 11, 1991 - April 30, 1998

DOE R&D Accomplishments Database

1998-08-01

As noted in the historical summary, this program encountered a number of changes in direction, schedule, and scope over the period 11 January 1991 to 31 December 1998. The report provides a comprehensive summary of all the varied aspects of the program over its seven and a quarter years, and highlights those aspects that provide information beneficial to future radioisotope programs. In addition to summarizing the scope of the Cassini GPHS RTG Program provided as background, the introduction includes a discussion of the scope of the final report and offers reference sources for information on those topics not covered. Much of the design heritage of the GPHS RTG comes from the Multi Hundred Watt (MHW) RTGs used on the Lincoln Experimental Satellites (LES) 8/9 and Voyager spacecraft. The design utilized for the Cassini program was developed, in large part, under the GPHS RTG program which produced the Galileo and Ulysses RTGs. Reports from those programs included detailed documentation of the design, development, and testing of converter components and full converters that were identical to, or similar to, components used in the Cassini program.

Guiding bioprocess design by microbial ecology.

PubMed

Volmer, Jan; Schmid, Andreas; Bühler, Bruno

2015-06-01

Industrial bioprocess development is driven by profitability and eco-efficiency. It profits from an early stage definition of process and biocatalyst design objectives. Microbial bioprocess environments can be considered as synthetic technical microbial ecosystems. Natural systems follow Darwinian evolution principles aiming at survival and reproduction. Technical systems objectives are eco-efficiency, productivity, and profitable production. Deciphering technical microbial ecology reveals differences and similarities of natural and technical systems objectives, which are discussed in this review in view of biocatalyst and process design and engineering strategies. Strategies for handling opposing objectives of natural and technical systems and for exploiting and engineering natural properties of microorganisms for technical systems are reviewed based on examples. This illustrates the relevance of considering microbial ecology for bioprocess design and the potential for exploitation by synthetic biology strategies. Copyright © 2015 Elsevier Ltd. All rights reserved.

The new color of money: safer, smarter, more secure

NASA Astrophysics Data System (ADS)

DiNunzio, Lisa A.; Clarke, Lenore

2004-06-01

Approximately 60% of U.S. currency notes circulate abroad. As the most widely used currency in the world, U.S. notes are the most likely to be counterfeited. Since 1996, the United States has been issuing currency with new security features. These features make U.S. currency easier to recognize as genuine and more secure against advancing computer technology that could be used for counterfeiting. Currency counterfeiters are increasingly turning to digital methods, as advances in technology make digital counterfeiting of currency easier and cheaper. In 1995, for example, less than one percent of counterfeit notes detected in the U.S. were digitally produced. By 2002, that number had grown to nearly 40 percent, according to the Secret Service. Yet despite the efforts of counterfeiters, U.S. currency counterfeiting has been kept at low levels. According to current estimates, between 0.01 and 0.02 percent of notes in circulation are counterfeit, or about 1-2 notes in every 10,000 genuine notes. The strategy for maintaining the security of Federal Reserve notes is to enhance the design of U.S. currency every seven to ten years. One objective of introducing the new currency is to emphasize the number of features available to the public for authenticating bills. The most-talked-about aspect of the redesigned currency is the subtle introduction of background colors to the bills. While color itself is not a security feature, the use of color provides the opportunity to add features that could assist in deterring counterfeiting. Color will also help people to better distinguish their notes. Security features for the newly designed currency include a security thread, a watermark, and a more distinct color-shifting ink. The new 20 note was issued in fall 2003, with the 50 and 100 notes scheduled to follow 12 to 18 months later. Plans to redesign the 10 and 5 are still under consideration, but there are no plans to redesign the 2 and 1 notes. As was the case with the redesigned 20 note issued in 1998, the new design will co-circulate with the current design. As notes return to the Federal Reserve from depository institutions, the Federal Reserve will only destroy the unfit notes introduced since 1998. Designs older than the Series 1996 are destroyed when returned to the Federal Reserve regardless of condition. To ensure a smooth introduction of the new currency, a five-year international public education effort was launched in 2002 to inform the public and target audiences, including financial institutions, law enforcement, and the vending industry of the transition to the new design. The public is the first line of defense against counterfeiting. So, it's important the public has the tools to recognize the new and modified security features in the redesigned notes.

Design and Delivery of Technical Module for the Business Intelligence Course

ERIC Educational Resources Information Center

Wang, Shouhong; Wang, Hai

2013-01-01

IS programs are increasingly being called on to offer courses in business intelligence. This article presents the pedagogical design and the delivery method of a practicable technical module for a non-technically oriented Business Intelligence course. It is a tutorial for the instructors who wish to incorporate a practical technical element in…

Statutory Time-Periods Technical Amendments Act of 2009

THOMAS, 111th Congress

Sen. Leahy, Patrick J. [D-VT

2009-03-18

Senate - 03/18/2009 Read twice and referred to the Committee on the Judiciary. (All Actions) Notes: For further action, see H.R.1626, which became Public Law 111-16 on 5/7/2009. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

77 FR 71083 - Regulations Affecting Credit Unions; Technical Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-29

...(d)(3) of the APA.\\15\\ The rule will, therefore, be effective immediately upon publication. \\14\\ 5 U...) of Appendix A to part 749 states that credit unions should permanently retain all current manuals... NCUA and other governmental agencies. This requirement has become outdated. All publications noted in...

Application of augmented reality for inferior alveolar nerve block anesthesia: A technical note

PubMed Central

2017-01-01

Efforts to apply augmented reality (AR) technology in the medical field include the introduction of AR techniques into dental practice. The present report introduces a simple method of applying AR during an inferior alveolar nerve block, a procedure commonly performed in dental clinics. PMID:28879340

Application of augmented reality for inferior alveolar nerve block anesthesia: A technical note.

PubMed

Won, Yu-Jin; Kang, Sang-Hoon

2017-06-01

Efforts to apply augmented reality (AR) technology in the medical field include the introduction of AR techniques into dental practice. The present report introduces a simple method of applying AR during an inferior alveolar nerve block, a procedure commonly performed in dental clinics.

EVALUATION OF BARRIERS TO THE USE OF RADIATION CURED COATINGS IN WIDE-WEB FLEXOGRAPHIC PRINTING

EPA Science Inventory

The report gives results of a study to investigate and identify the technical, economic, and educational barriers to the use and implementation of radiation-curable coatings (primarily ultraviolet (UV) curable inks) in the wide-web flexographic printing industry. (NOTE: In suppor...

Technical Note [cmUse of a Snare Wire to Perform Nephrostomy Access in the Presence of Obstructive Staghorn Calculi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nosher, John L.; Siegel, Randall L.; Bodner, Leonard J.

1996-05-15

We describe a technique for gaining access to the central collecting system via a chosen calyx, utilizing an alternative entry point to that calyx. An Amplatz nitinol loop snare is then used to convert this access to a traditional approach.

The Marriage of Two Opposing Cultures

ERIC Educational Resources Information Center

Loubriel, Luis

2007-01-01

With a heavy dominance on its technical/empirical aspects, the segmented performance, pedagogy, and assessment of Western classical music is undermining its goal of creating art with precision, style, and expressive beauty. This segmentation has its roots in the quantitative assessment processes found in music education and in the note-perfect…

76 FR 77458 - Amendment to Agency Rules of Practice

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-13

... Advancement Act (Technical Standards) The National Technology Transfer and Advancement Act (15 U.S.C. 272 note... forwarders it determines are reincarnations of other entities with a history of failing to comply with..., if submitted on behalf of an association, business, labor union, etc.). You may review the Department...

The Value of Taking Notes during Lectures. Technical Report No. 374.

ERIC Educational Resources Information Center

Anderson, Thomas H.; Armbruster, Bonnie B.

Using the conceptual frameworks of "levels of processing" and "transfer appropriate processing," the research literature on listening and notetaking was interpreted. Based on these frameworks, implications for encoding and external storage hypotheses are presented and critiqued. The report concludes that there is a potential benefit to students…

State Competencies for Writing: Grades K-6. Technical Note.

ERIC Educational Resources Information Center

Lawlor, Joseph

This paper contains descriptions of mandated minimum competency documents from seven states: Florida, Georgia, Louisiana, Michigan, Oklahoma, Tennessee, and Texas. Each description provides a picture of the general nature of the state requirements and a discussion of the specific writing skills requirements. The procedures used to compile a…

State Minimum Competencies for High School Graduation. Technical Note.

ERIC Educational Resources Information Center

Lawlor, Joseph

This paper contains descriptions of mandated minimum competency programs in 13 states: Connecticut, Delaware, Georgia, Hawaii, Idaho, Kansas, Missouri, New Jersey, New York, North Carolina, South Carolina, Texas, and Vermont. Each description provides the skills assessed in the state, the assessment instruments used, and the overall purposes of…

Improving Student Writing through Sentence Combining: A Literature Review. Technical Note.

ERIC Educational Resources Information Center

Lawlor, Joseph

The theoretical roots of sentence combining as a pedagogical strategy are discussed in this paper, along with recent studies of the development of written syntactic maturity. The paper examines several major sentence combining studies in detail and briefly summarizes additional relevant literature. The instructional implications of sentence…

A History of Commitment in CALL.

ERIC Educational Resources Information Center

Jamieson, Joan

The evolution of computer-assisted language learning (CALL) is examined, focusing on what has changed and what has not changed much during that time. A variety of changes are noted: the development of multimedia capabilities, color, animation, and technical improvement of audio and video quality; availability of databases, better fit between…

Technical note: Equilibrium moisture content of kabuli chickpea, black sesame, and white sesame seeds

USDA-ARS?s Scientific Manuscript database

Sesame and chickpeas are important crops for Ethiopia as both are major exports providing small farmers and the country much revenue. There is a lack of information on fundamental equilibrium moisture content (EMC) relationships for these products which would help facilitate better monitoring and st...

Concepts. The Journal of Defense Systems Acquisition Management. Summer 1981. Volume 4, Number 3.

DTIC Science & Technology

1981-01-01

Performance FREQUENCY POWER OUTPUT GIZMO MODEL 25 0-50 MHZ SATISFACTORY 50-125 MHZ UNSATISFACTORY ASTROMATICS MODEL C 0-50 MHZ SATISFACTORY 50-125 MHZ...MHZ) GIZMO ----- ASTROMATICS- NOTES: 1. Diagrams excellent for portraying precise technical relationships. 2. Diagrams are economical means of

Trunnion Rod Microcrack Detection

DTIC Science & Technology

2013-08-01

Richard W. Haskins, Joseph A. Padula , and John E. Hite BACKGROUND: Post-tensioned rods are used to anchor spillway gates and transfer the forces...email: James.A.Evans@usace.army.mil). This technical note should be cited as follows: Evans, J. A., Haskins, R. W., Padula , J. A., and Hite, J. E. 2013

Automating Technical Processes and Reference Services Using SPIRES.

ERIC Educational Resources Information Center

Buckley, Joseph James

1983-01-01

Examines the capabilities, cost-effectiveness, and flexibility of the Stanford Public Information Retrieval System (SPIRES), an online information retrieval system producing a variety of printed products, and notes its use in the Title I Evaluation Clearinghouse, advantages of SPIRES, programing, and availability. Eleven references and a five-item…

"Have Them Read a Good Book": Enriching the Scientific and Technical Writing Curriculum.

ERIC Educational Resources Information Center

Miles, Thomas H.

1989-01-01

Lists approximately 200 recent science and technology book titles (some with annotations). Notes that this literature acquaints students with the history of science and technology and helps them understand debated philosophical issues. Includes the following subject areas: anthropology; chemistry; computers and artificial intelligence; ecology;…

Technical Note: Orientation of cracks and hydrology in a shrink-swell soil

USDA-ARS?s Scientific Manuscript database

Crack orientations are an important soil physical property that affects water flow, particularly in vertic soils. However, the spatial and temporal variability of crack orientations across different land uses and gilgai features is not well-documented and addressed in hydrology models. Thus there is...

Technical note: A method for isolating glycogen granules from ruminal protozoa for further characterization

USDA-ARS?s Scientific Manuscript database

Evaluation of physical, compositional, and digestion characteristics of protozoal glycogen is best performed on a pure substrate in order to avoid interference from other cell components. A method for isolating protozoal glycogen without use of detergents was developed. Rumen inoculum was incubated ...

Generating a Professional Portfolio in the Writing Center: A Hypertext Tutor.

ERIC Educational Resources Information Center

Cullen, Roxanne; Balkema, Sandra

1995-01-01

Notes that Ferris State University's writing center uses HyperCard software in the Macintosh environment to assist students in technical/professional programs to develop professional portfolios. Suggests that this approach offers consistent instruction and equal access to content information as approved by faculty in specified disciplines in a…

Online Resources for Teaching Shakespeare. ERIC Digest.

ERIC Educational Resources Information Center

Stoicheva, Mila

To assist educators in effectively teaching the works of such a critical author as William Shakespeare, this Digest identifies and describes some of the most significant and useful online resources. The digest notes that the sites were chosen on the basis of their technical excellence, purpose, content, authorship, and general usefulness for…

Buildings for Education, Vol. 2, No. 2.

ERIC Educational Resources Information Center

Asian Regional Inst. for School Building Research, Colombo (Sri Lanka).

The activities of the Asian Regional Institute for School Building Research are described (studies conducted, contracts, development group work). Technical notes are presented concerning high-rise school buildings in Asian urban areas and related cost implications; the following factors are considered--(1) demand for space in urban areas, (2)…

Department of State Rewards Program Update and Technical Corrections Act of 2012

THOMAS, 112th Congress

Rep. Royce, Edward R. [R-CA-40

2012-02-17

House - 05/07/2012 Referred to the Subcommittee on Terrorism, Nonproliferation, and Trade. (All Actions) Notes: For further action, see S.2318, which became Public Law 112-283 on 1/15/2013. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

IFLA General Conference, 1990. Section on Research and Theory.

ERIC Educational Resources Information Center

International Federation of Library Associations, The Hague (Netherlands).

The three papers in this collection were presented during the meeting of the Section on Research and Theory. In the first paper, "BIEF: A North-South Knowledge Transfer Tool," Suzanne Richer examines the vital importance of scientific and technical information (STI) for developing countries, and notes that BIEF (Banque internationale…

Handbook of Labor Statistics. Bulletin 2175.

ERIC Educational Resources Information Center

Springsteen, Rosalind, Comp.; Epstein, Rosalie, Comp.

This publication makes available in one volume the major series produced by the Bureau of Labor Statistics. Technical notes preceding each major section contain information on data changes and explain the services. Forty-four tables derived from the Current Population Survey (CPS) provide statistics on labor force and employment status,…

Tax Technical Corrections Act of 2014

THOMAS, 113th Congress

Sen. Wyden, Ron [D-OR

2014-04-28

Senate - 04/28/2014 Placed on Senate Legislative Calendar under General Orders. Calendar No. 367. (All Actions) Notes: For further action, see H.R.5771, which became Public Law 113-295 on 12/19/2014. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Outcomes from the Productivity Places Program 2009: Technical Notes. Support Document

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2009

2009-01-01

This paper was produced as an added resource for the report "Outcomes from the Productivity Places Program 2009." "Outcomes from the Productivity Places Program 2009" presents information about the outcomes of students who completed their vocational education and training (VET) under the Productivity Places Program (PPP)…

The Learning Fund: Income Generation through NFE. Technical Note No. 22.

ERIC Educational Resources Information Center

Iskander, Anwas; And Others

The Learning Fund Program sponsored by PENMAS, the Indonesian Directorate of Community Education, successfully uses community-based learning activities to promote entrepreneurship and managerial skills among Indonesia's rural poor. Currently, the program integrates the learning, financial, and equipment resources necessary to help over 5,400 small…

TECHNICAL NOTE: CONDITIONS FOR USING THE FLOATING CHAMBER METHOD TO ESTIMATE AIR-WATER GAS EXCHANGE. (R825757)

EPA Science Inventory

The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

Launch Vehicle Design Process: Characterization, Technical Integration, and Lessons Learned

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.; Humphries, W. R.

2001-01-01

Engineering design is a challenging activity for any product. Since launch vehicles are highly complex and interconnected and have extreme energy densities, their design represents a challenge of the highest order. The purpose of this document is to delineate and clarify the design process associated with the launch vehicle for space flight transportation. The goal is to define and characterize a baseline for the space transportation design process. This baseline can be used as a basis for improving effectiveness and efficiency of the design process. The baseline characterization is achieved via compartmentalization and technical integration of subsystems, design functions, and discipline functions. First, a global design process overview is provided in order to show responsibility, interactions, and connectivity of overall aspects of the design process. Then design essentials are delineated in order to emphasize necessary features of the design process that are sometimes overlooked. Finally the design process characterization is presented. This is accomplished by considering project technical framework, technical integration, process description (technical integration model, subsystem tree, design/discipline planes, decision gates, and tasks), and the design sequence. Also included in the document are a snapshot relating to process improvements, illustrations of the process, a survey of recommendations from experienced practitioners in aerospace, lessons learned, references, and a bibliography.

Euro-NOTES Status Paper: from the concept to clinical practice.

PubMed

Fuchs, K H; Meining, A; von Renteln, D; Fernandez-Esparrach, G; Breithaupt, W; Zornig, C; Lacy, A

2013-05-01

The concept of natural orifice transluminal endoscopic surgery (NOTES) consists of the reduction of access trauma by using a natural orifice access to the intra-abdominal cavity. This could possibly lead to less postoperative pain, quicker recovery from surgery, fewer postoperative complications, fewer wound infections, and fewer long-term problems such as hernias. The Euro-NOTES Foundation has organized yearly meetings to work on this concept to bring it safely into clinical practice. The aim of this Euro-NOTES status update is to assess the yearly scientific working group reports and provide an overview on the current clinical practice of NOTES procedures. After the Euro-NOTES meeting 2011 in Frankfurt, Germany, an analysis was started regarding the most important topics of the European working groups. All prospectively documented information was gathered from Euro-NOTES and D-NOTES working groups from 2007 to 2011. The top five topics were analyzed. The statements of the working group activities demonstrate the growing information and changing insights. The most important selected topics were infection issue, peritoneal access, education and training, platforms and new technology, closure, suture, and anastomosis. The focus on research topics changed over time. The principle of hybrid access has overcome the technical and safety limitations of pure NOTES. Currently the following NOTES access routes are established for several indications: transvaginal access for cholecystectomy, appendectomy and colon resections; transesophageal access for myotomy; transgastric access for full-thickness small-tumor resections; and transanal/transcolonic access for rectal and colon resections. NOTES and hybrid NOTES techniques have emerged for all natural orifices and were introduced into clinical practice with a good safety record. There are different indications for different natural orifices. Each technique has been optimized for the purpose of finding a safe and realistic solution to perform the procedure according to the specific indication.

Scalable Amplification of Strand Subsets from Chip-Synthesized Oligonucleotide Libraries (Open Access)

DTIC Science & Technology

2015-11-16

detailed discussion of barcode designs in Supplementary Note 1, Supplementary Fig. 1 and sequences in Supplementary Note 2). Whereas the nicking and...eight subpools, each as a one- or as a two-barcode version ( design details in Supplementary Note 1). All subpools amplified strands with the expected...for the c2ca designs . We used the same restriction enzymes (Nb.BsrDI and Nt.BspQI) that were encoded between the primers and the target sequences to

Critical Technology Determination for Future Human Space Flight

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Vangen, Scott D.; Williams-Byrd, Julie A.; Steckleim, Jonette M.; Alexander, Leslie; Rahman, Shamin A.; Rosenthal, Matthew; Wiley, Dianne S.; Davison, Stephan C.; Korsmeyer, David J.;

Intracranial placement of a new, compliant guide catheter: technical note.

PubMed

Park, Min S; Stiefel, Michael F; Fiorella, David; Kelly, Michael; McDougall, Cameron G; Albuquerque, Felipe C

2008-09-01

We describe our initial experience with the use of a novel, compliant guide catheter designed for placement within the cranial vasculature in a series of seven patients who were treated for various intracranial pathologies. Seven patients were deemed to have either tortuous supra-aortic, intracranial, and/or extracranial vasculature or to require additional microcatheter support as the result of lesion location. The patients were treated, in part, with the 6-French Neuron delivery catheter (Penumbra, Inc., San Leandro, CA) at the authors' two institutions. The guide catheter was positioned in various distal locations within the intracranial internal carotid artery or external carotid artery. Three patients were treated for unruptured intracranial aneurysms, 2 patients for intracranial atherosclerosis, 1 patient for an arteriovenous malformation, and 1 patient for a pseudoaneurysm. All lesions were successfully treated through a microcatheter advanced in a coaxial fashion through the guide catheter. There were no complications related to the positioning of the catheter. Distal intra- or extracranial placement of a specially designed, compliant guide catheter can be performed safely and may improve access and microcatheter stability in patients with tortuous vessels or difficult-to-reach lesions.

Critical Technology Determination for Future Human Space Flight

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Vangen, Scott D.; Williams-Byrd, Julie A.; Stecklein, Jonette M.; Rahman, Shamim A.; Rosenthal, Matthew E.; Hornyak, David M.; Alexander, Leslie; Korsmeyer, David J.; Tu, Eugene L.;

Rapid cross platform healthcare gaming design and implementation: The cost effective methodology.

PubMed

Zhang, Melvyn W B; Ho, Roger C M

2016-11-14

There have been massive advances in E-Health and M-Health technology, with recent interest in the utility of games for healthcare and the promotion of well-being and recovery as well as patient empowerment. There has been various review demonstrating the clinical effectiveness and efficacy of games for healthcare. It is the aim of this technical note to illustrate how appropriate gaming engines could be used by non-expert clinicians to program games that could run across various platforms, as well as games that could integrate well with existing mechanical sensors. This would address the limitations with regards to the evidence base of games, as well as the limitations in the deployment of games to various participants. More importantly, games designed are also more likely to be cost-effective and lower in cost. The ability of integration with existing mechanical sensors would value-add existing games and enable recovery and remediation in various domains of health. This would further expand the potential of games as an adjunctive treatment for patients, or at least, to maintain the gains that they have made in their recovery process.

Technical specification for vacuum systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khaw, J.

The vacuum systems at the Stanford Linear Accelerator Center (SLAC) are primarily of all-metal construction and operate at pressures from 10/sup -5/ to 10/sup -11/ Torr. The primary gas loads during operation result from thermal desorption and beam-induced desorption from the vacuum chamber walls. These desorption rates can be extremely high in the case of hydrocarbons and other contaminants. These specifications place a major emphasis on eliminating contamination sources. The specifications and procedures have been written to insure the cleanliness and vacuum integrity of all SLAC vacuum systems, and to assist personnel involved with SLAC vacuum systems in choosing andmore » designing components that are compatible with existing systems and meet the quality and reliability of SLAC vacuum standards. The specification includes requirements on design, procurement, fabrication, chemical cleaning, clean room practices, welding and brazing, helium leak testing, residual gas analyzer testing, bakeout, venting, and pumpdown. Also appended are specifications regarding acceptable vendors, isopropyl alcohol, bakeable valve cleaning procedure, mechanical engineering safety inspection, notes on synchrotron radiation, and specifications of numerous individual components. (LEW)« less

Crew Transportation Technical Standards and Design Evaluation Criteria

NASA Technical Reports Server (NTRS)

Lueders, Kathryn L.; Thomas, Rayelle E. (Compiler)

2015-01-01

Crew Transportation Technical Standards and Design Evaluation Criteria contains descriptions of technical, safety, and crew health medical processes and specifications, and the criteria which will be used to evaluate the acceptability of the Commercial Providers' proposed processes and specifications.

Lateral supraorbital approach to ipsilateral PCA-P1 and ICA-PCoA aneurysms.

PubMed

Goehre, Felix; Jahromi, Behnam Rezai; Elsharkawy, Ahmed; Lehto, Hanna; Shekhtman, Oleg; Andrade-Barazarte, Hugo; Munoz, Francisco; Hijazy, Ferzat; Makhkamov, Makhkam; Hernesniemi, Juha

2015-01-01

Aneurysms of the posterior cerebral artery (PCA) are rare and often associated with anterior circulation aneurysms. The lateral supraorbital approach allows for a very fast and safe approach to the ipsilateral lesions Circle of Willis. A technical note on the successful clip occlusion of two aneurysms in the anterior and posterior Circle of Willis via this less invasive approach has not been published before. The objective of this technical note is to describe the simultaneous microsurgical clip occlusion of an ipsilateral PCA-P1 and an internal carotid artery - posterior communicating artery (ICA-PCoA) aneurysm via the lateral supraorbital approach. The authors present a technical report of successful clip occlusions of ipsilateral located PCA-P1 and ICA-PCoA aneurysms. A 59-year-old female patient was diagnosed with a PCA-P1 and an ipsilateral ICA-PCoA aneurysm by computed tomography angiography (CTA) after an ischemic stroke secondary to a contralateral ICA dissection. The patient underwent microsurgical clipping after a lateral supraorbital craniotomy. The intraoperative indocyanine green (ICG) videoangiography and the postoperative CTA showed a complete occlusion of both aneurysms; the parent vessels (ICA and PCA) were patent. The patient presents postoperative no new neurologic deficit. The lateral supraorbital approach is suitable for the simultaneous microsurgical treatment of proximal anterior circulation and ipsilateral proximal PCA aneurysms. Compared to endovascular treatment, direct visual control of brainstem perforators is possible.

The Design and Transfer of Advanced Command and Control (C2) Computer-Based Systems

DTIC Science & Technology

1980-03-31

TECHNICAL REPORT 80-02 QUARTERLY TECHNICAL REPORT: THE DESIGN AND TRANSFER OF ADVANCED COMMAND AND CONTROL (C 2 ) COMPUTER-BASED SYSTEMS ARPA...The Tasks/Objectives and/or Purposes of the overall project are connected with the design , development, demonstration and transfer of advanced...command and control (C2 ) computer-based systems; this report covers work in the computer-based design and transfer areas only. The Technical Problems thus

Canine ovariectomy by hybrid or total natural orifice transluminal endoscopic surgery: technical feasibility study and pain assessment.

PubMed

Linhares, Marcella Teixeira; Feranti, João Pedro Scussel; Coradini, Gabriela Pesamosca; Martins, Letícia Reginato; Martins, Arthur Rodrigues; Sarturi, Vanessa Zanchi; Gavioli, Felipe Baldissarella; Machado Silva, Marco Augusto; de Ataíde, Michelli Westphal; Teixeira, Luciana Gonçalves; Brun, Maurício Veloso

2018-06-13

To compare technical feasibility, surgical time, surgical complications, and postoperative pain in ovariectomy (OVE) by hybrid and total natural orifice transluminal endoscopic surgery (NOTES). Prospective randomized clinical trial. Sixteen healthy and sexually intact bitches. Dogs were randomly assigned to the hybrid NOTES group (HNG; n = 8) and the total NOTES group (TNG; n = 8) to compare surgical time, pain scores and complications. Pain was assessed by using the visual analog scale (VAS) and the Melbourne pain scale (MPS). Surgical time did not differ between the experimental groups (HNG = 46.3 ± 18.5 minutes, TNG = 54.6 ± 31.1 minutes). Exteriorization of the ovaries through the vaginal wound was the major difficulty. Complications were minor in both groups and occurred intraoperatively only in the HNG, and in both groups post operatively. No dogs required rescue analgesia in the intraoperative or postoperative period. There were no differences in VAS or MPS scores between the groups for any surgical times except for the VAS assessment at 72 hours after extubation (HNG = 1.1 ± 0.3, TNG = 0.7 ± 0.4, P = .0221). Both NOTES techniques were comparable for canine OVE, with no requirement for additional analgesia in the postoperative periods. It was not possible to determine whether there was a clear advantage of one technique rather than the other. The minimally invasive techniques proposed for laparoscopic OVE are feasible for dogs with low pain scores and low rates of complications for both groups. © 2018 The American College of Veterinary Surgeons.

A survey on robotic devices for upper limb rehabilitation

PubMed Central

2014-01-01

The existing shortage of therapists and caregivers assisting physically disabled individuals at home is expected to increase and become serious problem in the near future. The patient population needing physical rehabilitation of the upper extremity is also constantly increasing. Robotic devices have the potential to address this problem as noted by the results of recent research studies. However, the availability of these devices in clinical settings is limited, leaving plenty of room for improvement. The purpose of this paper is to document a review of robotic devices for upper limb rehabilitation including those in developing phase in order to provide a comprehensive reference about existing solutions and facilitate the development of new and improved devices. In particular the following issues are discussed: application field, target group, type of assistance, mechanical design, control strategy and clinical evaluation. This paper also includes a comprehensive, tabulated comparison of technical solutions implemented in various systems. PMID:24401110

Liquid Methane Testing With a Large-Scale Spray Bar Thermodynamic Vent System

NASA Technical Reports Server (NTRS)

Hastings, L. J.; Bolshinskiy, L. G.; Hedayat, A.; Flachbart, R. H.; Sisco, J. D.; Schnell. A. R.

2014-01-01

NASA's Marshall Space Flight Center conducted liquid methane testing in November 2006 using the multipurpose hydrogen test bed outfitted with a spray bar thermodynamic vent system (TVS). The basic objective was to identify any unusual or unique thermodynamic characteristics associated with densified methane that should be considered in the design of space-based TVSs. Thirteen days of testing were performed with total tank heat loads ranging from 720 to 420 W at a fill level of approximately 90%. It was noted that as the fluid passed through the Joule-Thompson expansion, thermodynamic conditions consistent with the pervasive presence of metastability were indicated. This Technical Publication describes conditions that correspond with metastability and its detrimental effects on TVS performance. The observed conditions were primarily functions of methane densification and helium pressurization; therefore, assurance must be provided that metastable conditions have been circumvented in future applications of thermodynamic venting to in-space methane storage.

Evaluation of Inter-Mountain Labs infrasound sensors : July 2007.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hart, Darren M.

2007-10-01

Sandia National Laboratories has tested and evaluated three Inter Mountain Labs infrasound sensors. The test results included in this report were in response to static and tonal-dynamic input signals. Most test methodologies used were based on IEEE Standards 1057 for Digitizing Waveform Recorders and 1241 for Analog to Digital Converters; others were designed by Sandia specifically for infrasound application evaluation and for supplementary criteria not addressed in the IEEE standards. The objective of this work was to evaluate the overall technical performance of the Inter Mountain Labs (IML) infrasound sensor model SS. The results of this evaluation were only comparedmore » to relevant noise models; due to a lack of manufactures documentation notes on the sensors under test prior to testing. The tests selected for this system were chosen to demonstrate different performance aspects of the components under test.« less

Microcomputer pollution model for civilian airports and Air Force bases. Model description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Segal, H.M.; Hamilton, P.L.

1988-08-01

This is one of three reports describing the Emissions and Dispersion Modeling System (EDMS). EDMS is a complex source emissions/dispersion model for use at civilian airports and Air Force bases. It operates in both a refined and a screening mode and is programmed for an IBM-XT (or compatible) computer. This report--MODEL DESCRIPTION--provides the technical description of the model. It first identifies the key design features of both the emissions (EMISSMOD) and dispersion (GIMM) portions of EDMS. It then describes the type of meteorological information the dispersion model can accept and identifies the manner in which it preprocesses National Climatic Centermore » (NCC) data prior to a refined-model run. The report presents the results of running EDMS on a number of different microcomputers and compares EDMS results with those of comparable models. The appendices elaborate on the information noted above and list the source code.« less

Bridging the sanitation gap between disaster relief and development.

PubMed

Lai, Ka-Man; Ramirez, Claudia; Liu, Weilong; Kirilova, Darina; Vick, David; Mari, Joe; Smith, Rachel; Lam, Ho-Yin; Ostovari, Afshin; Shibakawa, Akifumi; Liu, Yang; Samant, Sidharth; Osaro, Lucky

2015-10-01

By interpreting disasters as opportunities to initiate the fulfilment of development needs, realise the vulnerability of the affected community and environment, and extend the legacy of relief funds and effort, this paper builds upon the concept linking relief, rehabilitation and development (LRRD) in the sanitation sector. It aims to use a composite of case studies to devise a framework for a semi-hypothetical scenario to identify critical components and generic processes for a LRRD action plan. The scenario is based on a latrine wetland sanitation system in a Muslim community. Several sub-frameworks are developed: (i) latrine design; (ii) assessment of human waste treatment; (iii) connective sanitation promotion strategy; and (iv) ecological systems and environmental services for sanitation and development. This scenario illustrates the complex issues involved in LRRD in sanitation work and provides technical notes and references for a legacy plan for disaster relief and development. © 2015 The Author(s). Disasters © Overseas Development Institute, 2015.

TECHNICAL NOTE: High-speed grinding using thin abrasive disks for microcomponents

NASA Astrophysics Data System (ADS)

Yeo, S. H.; Balon, S. A. P.

2002-01-01

This paper introduces the development of a high-speed grinding device for cylindrical grinding of microcomponents made of hard and brittle materials. The study made use of an ultraprecision diamond turning machine tool as a basic platform. The novelty of the device is based on the high-speed air bearing spindle with a thin grinding wheel, similar to the dicing technology for silicon wafer fabrication. The spindle attachment is inclined at an angle to the main spindle which holds the precision fixture mechanism via the vacuum chuck. Experiments have been conducted to verify the design and implementation of the grinding methodology. A feature size as small as 31 μm in diameter and average surface roughness of 98 nm were obtained in the experimental work. It is found that the work done is capable of manufacturing miniature components, such as microcylindrical stepped shafts.

Comparison of the Window-Frame RHIC-abort kicker with C-type Kicker

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsoupas, N.; Hahn, H.; Meng, W.

2014-08-26

The high intensity proton bunches (~2.5x10 11 p/bunch ) circulating in RHIC increase the temperature of the ferrite-made RHIC-abort-kickers above the Curie point; as a result, the kickers cannot provide the required field to abort the beam at the beam dump. A team of experts in the CAD department worked on modifying the design of the window-frame RHIC-abort kicker to minimize the hysteresis losses responsible for the increase of the ferrite’s temperature. In this technical note we report some results from the study of two possible modifications of the window-frame RHIC-abort kicker, and we compare these results with those ofmore » a propose C-type RHIC-abort kicker. We also include an Appendix where we describe a method which may further reduce the hysteresis losses of the window-frame kicker.« less

Performing Isoelectric Focusing and Simultaneous Fractionation of Proteins on A Rotary Valve Followed by Sodium Dodecyl – Polyacrylamide Gel Electrophoresis

PubMed Central

Wang, Wei; Lu, Joann J.; Gu, Congying; Zhou, Lei; Liu, Shaorong

2013-01-01

In this technical note, we design and fabricate a novel rotary valve and demonstrate its feasibility for performing isoelectric focusing and simultaneous fractionation of proteins, followed by sodium dodecyl – polyacrylamide gel electrophoresis. The valve has two positions. In one position, the valve routes a series of capillary loops together into a single capillary tube where capillary isoelectric focusing (CIEF) is performed. By switching the valve to another position, the CIEF-resolved proteins in all capillary loops are isolated simultaneously, and samples in the loops are removed and collected in vials. After the collected samples are briefly processed, they are separated via sodium dodecyl – polyacrylamide gel electrophoresis (SDS-PAGE, the 2nd-D separation) on either a capillary gel electrophoresis instrument or a slab-gel system. The detailed valve configuration is illustrated, and the experimental conditions and operation protocols are discussed. PMID:23819755

The UP College of Nursing Collaborating Center for Nursing Development in Primary Health Care.

PubMed

Yapchiongco, A S

1990-01-01

Officially designated as one of WHO's Collaborating Centers for Nursing Development (CCND), the UP College of Nursing in the Philippines will take on a leading role in achieving "health for all" through primary health care (PHC). The 1978 Declaration of Alma-Ata called for the goal of health for all by the year 2000, and recognized the key role of the nursing profession in this effort. In order to be designated a WHO collaborating center, an institution must be able to provide scientific and technical leadership at the national and international level, must be a stable institution, and must have the capacity to contribute to WHO programs. A WHO collaborating center forms part of an international network of institutions. Having become such a center, the UP College will form part of the Global Network for Nursing Development, organized in March 1987. The Global Network's functions include: 1) coordinating activities and promoting technical cooperation; 2) disseminating and exchanging informational; 3) monitoring trends in health services development and assessing their implications for nursing development; 4) supporting research; 5) gathering support and resources; and 6) promoting the goals of nursing development. As part of the Global Network, the UP College has developed a 4-year plan to fulfill the network's functions. During the June 1989 inauguration of the CCND, the Philippine Secretary of Health, Dr. Alfredo R. A. Bengzon, noted the country's lopsided ratio of health personnel per population, and issued a challenge to the UP College to lead the country in accelerating nursing development.

75 FR 64322 - Notice of Formula Allocations and Program Requirements for Neighborhood Stabilization Program...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-19

... notice also notes statutory issues affecting program design and implementation. Note: This notice is... gave HUD broad waiver and alternative requirement authority, which HUD used in designing NSP program... activity produces housing, how the design of the activity will ensure continued affordability; v. How the...

International Linear Collider Technical Design Report (Volumes 1 through 4)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison M.

2013-03-27

The design report consists of four volumes: Volume 1, Executive Summary; Volume 2, Physics; Volume 3, Accelerator (Part I, R and D in the Technical Design Phase, and Part II, Baseline Design); and Volume 4, Detectors.

Improved technical success and radiation safety of adrenal vein sampling using rapid, semi-quantitative point-of-care cortisol measurement.

PubMed

Page, Michael M; Taranto, Mario; Ramsay, Duncan; van Schie, Greg; Glendenning, Paul; Gillett, Melissa J; Vasikaran, Samuel D

2018-01-01

Objective Primary aldosteronism is a curable cause of hypertension which can be treated surgically or medically depending on the findings of adrenal vein sampling studies. Adrenal vein sampling studies are technically demanding with a high failure rate in many centres. The use of intraprocedural cortisol measurement could improve the success rates of adrenal vein sampling but may be impracticable due to cost and effects on procedural duration. Design Retrospective review of the results of adrenal vein sampling procedures since commencement of point-of-care cortisol measurement using a novel single-use semi-quantitative measuring device for cortisol, the adrenal vein sampling Accuracy Kit. Success rate and complications of adrenal vein sampling procedures before and after use of the adrenal vein sampling Accuracy Kit. Routine use of the adrenal vein sampling Accuracy Kit device for intraprocedural measurement of cortisol commenced in 2016. Results Technical success rate of adrenal vein sampling increased from 63% of 99 procedures to 90% of 48 procedures ( P = 0.0007) after implementation of the adrenal vein sampling Accuracy Kit. Failure of right adrenal vein cannulation was the main reason for an unsuccessful study. Radiation dose decreased from 34.2 Gy.cm 2 (interquartile range, 15.8-85.9) to 15.7 Gy.cm 2 (6.9-47.3) ( P = 0.009). No complications were noted, and implementation costs were minimal. Conclusions Point-of-care cortisol measurement during adrenal vein sampling improved cannulation success rates and reduced radiation exposure. The use of the adrenal vein sampling Accuracy Kit is now standard practice at our centre.

The nursing students' attitude toward using blogs in a nursing clinical practicum in Taiwan: a 3-R framework.

PubMed

Lin, Kai-Yin; Shen, Yen-Fen

2013-09-01

Some nursing educators have been using blogs as a channel to reflect on, share, and discuss questions and ideas for educational purpose. There were not many studies focused on the application of blog technology to the professional development of nursing education in Taiwan. The major goal of this study was to use a blog platform for students, writing their reflection notes, and observing the feedbacks from peers during their clinical practicum. Then we tried to probe the nursing students' attitude toward adopting 3-R categories based blog, which included wRiting reflection notes, Reading peers' notes, and Receiving peers' feedback. Of the 179 fourth grade from one five-year technical college students enrolled in a clinical practice course in Taiwan were used as a pool of sampling. Four-eight students were invited by the researcher to take part in this project. 90% of the participants agreed that blogs provided them with opportunities to share personal experiences with others. 81% of them valued that blogs provided opportunities to offering encouragement and emotional support to their peers. A majority of the participants believed that reading peers' journals was helpful in enhancing their professional development. In addition, all of them agreed that reading peers' journals can help them understand their peer's viewpoints. Most of the participants agreed that they were benefited through receiving feedbacks on the blogs. About 98% of them agreed that feedbacks can promote interaction with peers. The findings of this study generally indicated the participants' positive attitude toward using blogs in their clinical practicum. A majority of the participants also claimed that blogs provided them the opportunities to share personal experiences with their peers as well as to see things from their peers' viewpoints. They believed that reading peers' notes was helpful in enhancing their professional development. In addition, most of them agreed that receiving feedbacks could promote in-depth reflections; therefore, they were encouraged to write more reflective notes. Thus, future clinical practicum design should exert efforts to foster students' collaboration, reflections, and dialogues by providing blog platform. Copyright © 2012 Elsevier Ltd. All rights reserved.

31 CFR 515.405 - Exportation of securities, currency, checks, drafts and promissory notes.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., checks, drafts and promissory notes. 515.405 Section 515.405 Money and Finance: Treasury Regulations..., drafts and promissory notes. Section 515.201 prohibits the exportation of securities, currency, checks, drafts and promissory notes to a designated foreign country. ...

31 CFR 515.405 - Exportation of securities, currency, checks, drafts and promissory notes.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., checks, drafts and promissory notes. 515.405 Section 515.405 Money and Finance: Treasury Regulations..., drafts and promissory notes. Section 515.201 prohibits the exportation of securities, currency, checks, drafts and promissory notes to a designated foreign country. ...

31 CFR 515.405 - Exportation of securities, currency, checks, drafts and promissory notes.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., checks, drafts and promissory notes. 515.405 Section 515.405 Money and Finance: Treasury Regulations..., drafts and promissory notes. Section 515.201 prohibits the exportation of securities, currency, checks, drafts and promissory notes to a designated foreign country. ...

31 CFR 515.405 - Exportation of securities, currency, checks, drafts and promissory notes.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., checks, drafts and promissory notes. 515.405 Section 515.405 Money and Finance: Treasury Regulations..., drafts and promissory notes. Section 515.201 prohibits the exportation of securities, currency, checks, drafts and promissory notes to a designated foreign country. ...

31 CFR 515.405 - Exportation of securities, currency, checks, drafts and promissory notes.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., checks, drafts and promissory notes. 515.405 Section 515.405 Money and Finance: Treasury Regulations..., drafts and promissory notes. Section 515.201 prohibits the exportation of securities, currency, checks, drafts and promissory notes to a designated foreign country. ...

GLYCOL DEHYDRATOR BTEX AND VOC EMISSIONS TESTING RESULTS AT TWO UNITS IN TEXAS AND LOUISIANA VOL. I: TECHNICAL REPORT

EPA Science Inventory

The report gives results of the collection of emissions tests data at two triethylene glycol units to provide data for comparison to GRI-GLYCalc, a computer program developed to estimate emissions from glycol dehydrators. (NOTE: Glycol dehydrators are used in the natural gas indu...

TECHNICAL NOTE: Effect of bait delivery interval in an automated head-chamber system on respiration gas estimates when cattle are grazing rangeland

USDA-ARS?s Scientific Manuscript database

Agricultural methane emissions account for approximately 43% of all anthropogenic methane emissions and the majority of agricultural CH4 emissions are attributed to enteric fermentation within ruminant livestock, therefor interest is heightened in quantifying and mitigating this source. An automate...

The Coast Artillery Journal. Volume 74, Number 5, July-August 1931

DTIC Science & Technology

1931-08-01

adhering to the principle when faced with the fact of war. Finally, none of the former Allies feel that the Zoll- Yerein-Anschluss-::\\Iittel Europa issue...jngs published in Ordnance Technical Notes Xo. 5 and Proving Ground probable errors for the 16-inch gun at quadrant elevation.., from 45 to 65

Weapons Acquisition System Reform Through Enhancing Technical Knowledge and Oversight Act of 2009

THOMAS, 111th Congress

Rep. Skelton, Ike [D-MO-4

2009-04-27

House - 05/13/2009 Laid on the table. See S.454 for further action. (All Actions) Notes: For further action, see S.454, which became Public Law 111-23 on 5/22/2009. Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation:

Knowledge-Based Replanning System.

DTIC Science & Technology

1987-05-01

appeared to be making significant progress. Theoretical linguistics pulled itself together in the late 1970s and early 1980s, and more and more Al...Richard, "Achievingv Several GoalIS SimuL1tan1C0ulvj\\. Artiti:1al 1111CIic~ Center, Technical Note 107, SRI Project 2245, JlyI 19-5. - 77 - ~ k I

Physics Laboratory Project Book, 1979-80.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Bureau of Vocational-Technical Schools.

This Physics Laboratory Project Book, assembled through a survey of science instructors in vocational-technical schools in Connecticut, is an extension of the Chemistry-Materials Laboratory Project Book (see note) and is intended to meet a variety of needs. It can serve as an idea book, with the instructor taking from it as needed and adding or…

State Requirements for High School Graduation: Communication Skills. Technical Note.

ERIC Educational Resources Information Center

Lawlor, Joseph

This paper contains descriptions of documents setting forth the minimum communications skills competencies required for high school graduation in seven states: Florida, Louisiana, Maryland, Massachusetts, New Mexico, and Utah. It then describes the procedures used to compile a synthesized list from those documents for use in a project to assess…

Road-to-Birth Game. Technical Note No. 24.

ERIC Educational Resources Information Center

Burns, Julie; Bialosiewicz, Frank

Intended to help pregnant women in Third World regions acquire the attitudes and skills necessary to help them maintain their health and that of their unborn children, the game uses role playing and simulation to stress the importance of prenatal care, teach the recognition and treatment of common pregnancy problems and danger signals, and…

Hydrographic Measurements in the Western Arlboran Sea, October 1982.

DTIC Science & Technology

1984-04-01

about 1 km. Individual fixes based on the satellite system were accurate to about 0.5 km and on omega to about 2.0 km. 9 Table 3. Salinity Calibration...Activity Technical Note 224. 100 p. Cano, C. and F.F. de Castillejo (1972). Contribucion al Conocimiento del Mar de Alboran: III. Variaciones del

Puppets and the Theater. Technical Note No. 12.

ERIC Educational Resources Information Center

Moreno, Carlos; And Others

This report examines a joint project of the University of Massachusetts and the Ecuador Ministry of Education which used puppet and "campesino" (folk) theater as a creative form for the presentation of numeracy and literacy programs and for introducing social consciousness concepts. It focuses on the use of the puppet theater in…

Do the U.S. Dioecious and Monoecious biotypes of Hydrilla verticillata L.F. Royle hybridize?

USDA-ARS?s Scientific Manuscript database

This technical note reports the results of two studies to address the question of whether the two hydrilla biotypes present in the U.S. can hybridize. These include whether hybridization can occur under controlled conditions and in field populations where the two hybrids coexist in close proximity ...

Using Inspections to Improve the Quality of Product Documentation and Code.

ERIC Educational Resources Information Center

Zuchero, John

1995-01-01

Describes how, by adapting software inspections to assess documentation and code, technical writers can collaborate with development personnel, editors, and customers to dramatically improve both the quality of documentation and the very process of inspecting that documentation. Notes that the five steps involved in the inspection process are:…

78 FR 29338 - Applications for New Award; Technical Assistance To Improve State Data Capacity-National...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-20

... formative and summative evaluations of the project; Note: The following Web site provides more information... plan, linked to the project's logic model, for a formative evaluation of the project's activities. The plan must describe how the formative evaluation will use clear performance objectives to ensure...

Ashton-Warner Literacy Method. Technical Note No. 5.

ERIC Educational Resources Information Center

Gunter, Jock

This document describes a literacy project in rural Ecuador using a modified version of Sylvia Ashton Warner's language experience approach. This method allows learners to approach written culture on their own terms by learning words important to their life, then transferring these works to sentences and stories. The approach reduces the rural…

Overview of Project Year 2000 in Rhode Island Public Higher Education.

ERIC Educational Resources Information Center

Rhode Island State Board of Governors for Higher Education, Providence.

This monthly report documents the accomplishments of the Year 2000 project in Rhode Island's public higher education. It reviews computer problems related to the Year 2000 date change, noting the basic technical solution necessary to avoid disruption to higher education, and summarizes Executive Order 99-1, issued in January 1999, requiring all…

User Procedures Standardization for Network Access. NBS Technical Note 799.

ERIC Educational Resources Information Center

Neumann, A. J.

User access procedures to information systems have become of crucial importance with the advent of computer networks, which have opened new types of resources to a broad spectrum of users. This report surveys user access protocols of six representative systems: BASIC, GE MK II, INFONET, MEDLINE, NIC/ARPANET and SPIRES. Functional access…

Vocabulary Acquisition: Curricular and Instructional Implications for Diverse Learners. Technical Report No. 14.

ERIC Educational Resources Information Center

Baker, Scott K.; And Others

A curricular and instructional framework for increasing the vocabulary skills of diverse learners is described. Areas of convergence in research literature on vocabulary learning and diverse learners are noted, and two recommendations based on these areas of convergence are offered: interventions to address the vocabulary delays of diverse…

CHANGES IN OPERATING PROCEDURES FOR AEROSOL CONCENTRATION UNIFORMITY FOR PM2.5 AND PM10 SAMPLER TESTING

EPA Science Inventory

This technical note documents changes in the standard operating procedures used at the Environmental Protection Agency's (U.S. EPA) aerosol testing wind tunnel facility for testing of particulate matter monitoring methods of PM2.5 and PM10. These changes are relative to the op...

std::string Append

DTIC Science & Technology

2015-10-01

UNCLASSIFIED AD-E403 689 Technical Report ARWSE-TR-14026 STD::STRING APPEND Tom Nealis...DATES COVERED (From – To) 4. TITLE AND SUBTITLE STD::STRING APPEND 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6...DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release; distribution is unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT Appending

75 FR 35862 - Self-Regulatory Organizations; NYSE Amex LLC; Notice of Filing and Immediate Effectiveness of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-23

... Exchange notes that a version of the instant filing requesting an extension of the Pilot was formally filed... May 27, 2010, due to technical deficiencies in that filing. The instant version corrects those... the instant filing is consistent with these principles. Specifically an extension will allow the...

77 FR 38094 - Biweekly Notice; Applications and Amendments to Facility Operating Licenses and Combined Licenses...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-26

... controverted. In addition, the requestor/petitioner shall provide a brief explanation of the bases for the... Technical Specification (TS) 3.3.6, ``Containment Purge Isolation Instrumentation,'' such that a Note would... 3.6.3, ``Containment Isolation Valves,'' and TS 3.9.4, ``Containment Penetrations.'' Basis for...

45. CAPE COD AIR STATION PAVE PAWS FACILITY BUILDING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

45. CAPE COD AIR STATION PAVE PAWS FACILITY - BUILDING ELEVATION VIEW WITH BUILDING METAL SIDING BEING APPLIED ON "A" FACE (LEFT) AND "B" FACE (RIGHT). NOTE THAT NORTH IS GENERALLY TO RIGHT OF VIEW. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

Hey, Teacher, You Bloodied Up My Paper!

ERIC Educational Resources Information Center

Shuman, R. Baird

2000-01-01

Describes how the author developed an approach to teaching writing and to grading student writing that gets students themselves to understand their technical mistakes in using language, but also lets them know the strengths in their writing upon which they can build. Notes that this approach unexpectedly cut down on the time she spent reading and…

Technical note: Concerns regarding 24-h sampling for formaldehyde, acetaldehyde, and acrolein using 2,4-dintrophenylhydrazine (DNPH)-coated solid sorbents

EPA Science Inventory

A wide variety of natural and anthropogenic sources emit airborne carbonyls such as aldehydes (RCHO) and ketones (R1COR2). Vegetation, food, forest fires, fossil fuel combustion, disinfectants, fumigants, preservatives, and resins are a few examples of primary carbonyl sources. T...

Item Vector Plots for the Multidimensional Three-Parameter Logistic Model

ERIC Educational Resources Information Center

Bryant, Damon; Davis, Larry

2011-01-01

This brief technical note describes how to construct item vector plots for dichotomously scored items fitting the multidimensional three-parameter logistic model (M3PLM). As multidimensional item response theory (MIRT) shows promise of being a very useful framework in the test development life cycle, graphical tools that facilitate understanding…

Literature in a TAFE Institute: The Curriculum, Students and Their Classroom Experiences.

ERIC Educational Resources Information Center

Hatters, Cathy

2001-01-01

Notes that teaching literature in a Technical and Further Education setting presents its own special set of problems and paradoxes not usually encountered by teachers in more conventional classrooms. Discusses students and their literature experiences; impact of the canon on teaching; and influence of modern literary theory on the reader-text…

Technical Note: Fast two-dimensional GC-MS with thermal extraction for anhydro-sugars in fine aerosols

EPA Science Inventory

A fast two-dimensional gas chromatography (GC-MS) method that uses heart-cutting and thermal extraction (TE) and requires no chemical derivatization is developed for the determination of anhydro-sugars in fine aerosols. Evaluation of the TE-GC-GC-MS method shows high average rela...

"Good Work Awards:" Effects on Children's Families. Technical Report #12.

ERIC Educational Resources Information Center

Chun, Sherlyn; Mays, Violet

This brief report describes parental reaction to a reinforcement strategy used with children in the Kamehameha Early Education Program (KEEP). Staff members report that "Good Work Awards" (GWAs) are viewed favorably by mothers of students. GWAs are dittoed notes sent home with children when they have met a minimum criterion for daily…

Challenges in reusing transactional data for daily documentation in neonatal intensive care.

PubMed

Kim, G R; Lawson, E E; Lehmann, C U

2008-11-06

The reuse of transactional data for clinical documentation requires navigation of computational, institutional and adaptive barriers. We describe organizational and technical issues in developing and deploying a daily progress note tool in a tertiary neonatal intensive care unit that reuses and aggregates data from a commercial integrated clinical information system.

Sustainable development through biomass utilization: A practical approach

Treesearch

Ravi Malhotra

2008-01-01

(Please note, this is an abstract only) This paper is for folks involved in community development efforts targeted towards biomass utilization. Our approach to evaluate the potential for establishing enterprises that utilize locally available forest resources is tailored specifically to the needs of the local community. We evaluate the: 1. Technical feasibility and...

Learning by Doing: Teaching Decision Making through Building a Code of Ethics.

ERIC Educational Resources Information Center

Hawthorne, Mark D.

2001-01-01

Notes that applying abstract ethical principles to the practical business of building a code of applied ethics for a technical communication department teaches students that they share certain unarticulated or unconscious values that they can translate into ethical principles. Suggests that combining abstract theory with practical policy writing…

Technical assistance for intensive culture of northern forest types

Treesearch

Timothy G. OKeffe

1977-01-01

During this Bicentennial celebration, it is interesting to note that in America TA programs in forestry have evolved from both a formal and an informal foundation. European foresters, attempting to motivate many small forest landowners to practice more intensive forest management, have learned that incentive and educational TA programs are far more effective than...

Diagnosing forest vegetation for air pollution injury

Treesearch

Keith F. Jensen

1989-01-01

The purpose of this Note is to help you become more technically informed about air pollution when serious problems need to be diagnosed by pollution specialists. (Except for ozone, most of the information discussed does not attempt to describe possible air pollution damage caused by long distance transport. This complex problem is currently under intense study.)

22 CFR 126.4 - Shipments by or for United States Government agencies.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., including technical data or the performance of a defense service, by or for any agency of the U.S... Bill of Lading. This exemption, however, does not apply when a U.S. Government agency acts as a... military purposes beyond the possibility of restoration. Note: Special definition. For purposes of this...

Selection of Technical Communication Concepts for Integration into an Accounting Information Systems Course: A WAC Case Study.

ERIC Educational Resources Information Center

Gelinas, Ulric J., Jr.; Rama, D. V.; Skelton, Terrance M.

1997-01-01

Profiles a writing-across-the-curriculum project in an accountancy program. Notes that the team's collaborative process produced three critical planning decisions: (1) establishing "fitness-for-use" for evaluating student communications; (2) selecting only those forms of communication used in accountancy; and (3) teaching only those…

EVALUATION OF BARRIERS TO THE USE OF RADIATION-CURED AND HOT MELT COATINGS IN COATED AND LAMINATED SUBSTRATE MANUFACTURING

EPA Science Inventory

The report gives results of a study to investigate and identify the technical, educational, and economic barriers to the use and implementation of radiation-cured and hot melt coatings in coated and laminated substrate manufacturing. (NOTE: In support of EPA's Source Reduction Re...

Slavoj Zizek: Philosopher, Cultural Critic, and Cyber-Communist.

ERIC Educational Resources Information Center

Olson, Gary A.; Worsham, Lynn

2001-01-01

Presents an interview with Slavoj Zizek. Notes that what makes Slavoj Zizek so exhilarating to read (and to listen to) is the overwhelming range of subjects - both popular and technical - at his command. Discusses many of his works including books on philosophy and psychoanalytic theory, books and articles on popular culture, and newspaper…

WOOD PRODUCTS IN THE WASTE STREAM: CHARACTERIZATION AND COMBUSTION EMISSIONS - VOLUME 2. APPENDICES

EPA Science Inventory

The report gives results of a study of technical, public policy, and regulatory issues that affect the processing and combustion of waste wood for fuel. (NOTE: Waste wood is wood that is separated from a solid-waste stream, processed into a uniform-sized product, and reused for o...

77 FR 38375 - Notice of Availability of the Final Environmental Impact Statement (FEIS) for the Taos Regional...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-27

... warranted. However, FAA's review of current information did note that some social and environmental changes... alternatives conducted in this FEIS. However, to document and disclose the social and environmental changes... discusses any potential impacts related to the changed social and environmental conditions. The technical...

Gifted and Talented Education in the Soviet Union.

ERIC Educational Resources Information Center

Fetterman, David M.

1987-01-01

Focusing on the Young Pioneer Palace system in Moscow, this brief article reviews the Soviet Union's educational approach to gifted and talented children. Noted is the elaborate network of after-school programs with such activities at the Young Pioneer Palace as technical circles, naturalists' circles, song and dance ensembles, and a sports…

Proficiency Verification Systems (PVS): Skills Indices for Language Arts. Technical Note.

ERIC Educational Resources Information Center

Humes, Ann

The procedures undertaken in developing and organizing skills indexes for use in coding elementary school language arts textbooks to determine what is actually taught are presented in this paper. The outlined procedures included performing a preliminary analysis on four language arts textbooks to compile an extensive list of skills and performance…

Technical Note: Concerns regarding 24-h sampling for formaldehyde, acetaldehyde, and acrolein using 2,4-dinitrophenylhydrazine (DNPH)-coated solid sorbents

EPA Science Inventory

A wide variety of natural and anthropogenic sources emit airborne carbonyls such as aldehydes (RCHO) and ketones (R1COR2). Vegetation, food, forest fires, fossil fuel combustion, disinfectants, fumigants, preservatives, and resins are a few examples of primary carbonyl sources. T...

What Is Rotating in Exploratory Factor Analysis?

ERIC Educational Resources Information Center

Osborne, Jason W.

2015-01-01

Exploratory factor analysis (EFA) is one of the most commonly-reported quantitative methodology in the social sciences, yet much of the detail regarding what happens during an EFA remains unclear. The goal of this brief technical note is to explore what "rotation" is, what exactly is rotating, and why we use rotation when performing…

TECHNICAL NOTE: Actuation displacement performance change of pre-stressed piezoelectric actuators attached to a flat surface

NASA Astrophysics Data System (ADS)

Goo, Nam Seo; Phuoc Phan, Van; Park, Hoon Cheol

2009-03-01

Pre-stressed piezoelectric actuators such as RAINBOW, THUNDER™, and LIPCA have a curvature due to a mismatch of the coefficient of thermal expansion, which inevitably exists during the manufacturing process. This technical note provides an answer to the question of how their actuation displacement performance changes when the curved pre-stressed piezoelectric actuators are attached to a flat surface. Finite element analysis with the ANSYS™ program was used to calculate the stress distribution inside a LIPCA, one of the pre-stressed piezoelectric actuators, after the LIPCA was cured and attached to the flat surface. The change of actuation displacement performance can be explained in terms of the relation between the piezoelectric strain constants and internal stress. As a result of the curing and attachment to a flat surface, the two-dimensional stress state inside the piezoceramic layer leads to an expected increase of around 51% for the longitudinal piezoelectric strain constant. To confirm this result, we reconsider the experimental results of the actuation moment measurement of the LIPCA and bare lead zirconium titanate.

Syntactic/semantic techniques for feature description and character recognition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gonzalez, R.C.

1983-01-01

The Pattern Analysis Branch, Mapping, Charting and Geodesy (MC/G) Division, of the Naval Ocean Research and Development Activity (NORDA) has been involved over the past several years in the development of algorithms and techniques for computer recognition of free-form handprinted symbols as they appear on the Defense Mapping Agency (DMA) maps and charts. NORDA has made significant contributions to the automation of MC/G through advancing the state of the art in such information extraction techniques. In particular, new concepts in character (symbol) skeletonization, rugged feature measurements, and expert system-oriented decision logic have allowed the development of a very high performancemore » Handprinted Symbol Recognition (HSR) system for identifying depth soundings from naval smooth sheets (accuracies greater than 99.5%). The study reported in this technical note is part of NORDA's continuing research and development in pattern and shape analysis as it applies to Navy and DMA ocean/environment problems. The issue addressed in this technical note deals with emerging areas of syntactic and semantic techniques in pattern recognition as they might apply to the free-form symbol problem.« less

Process Evaluation of a Quality Improvement Project to Decrease Hospital Readmissions From Skilled Nursing Facilities.

PubMed

Meehan, Thomas P; Qazi, Daniel J; Van Hoof, Thomas J; Ho, Shih-Yieh; Eckenrode, Sheila; Spenard, Ann; Pandolfi, Michelle; Johnson, Florence; Quetti, Deborah

2015-08-01

To describe and evaluate the impact of quality improvement (QI) support provided to skilled nursing facilities (SNFs) by a Quality Improvement Organization (QIO). Retrospective, mixed-method, process evaluation of a QI project intended to decrease preventable hospital readmissions from SNFs. Five SNFs in Connecticut. SNF Administrators, Directors of Nursing, Assistant Directors of Nursing, Admissions Coordinators, Registered Nurses, Certified Nursing Assistants, Receptionists, QIO Quality Improvement Consultant. QIO staff provided training and technical assistance to SNF administrative and clinical staff to establish or enhance QI infrastructure and implement an established set of QI tools [Interventions to Reduce Acute Care Transfers (INTERACT) tools]. Baseline SNF demographic, staffing, and hospital readmission data; baseline and follow-up SNF QI structure (QI Committee), processes (general and use of INTERACT tools), and outcome (30-day all-cause hospital readmission rates); details of QIO-provided training and technical assistance; QIO-perceived barriers to quality improvement; SNF leadership-perceived barriers, accomplishments, and suggestions for improvement of QIO support. Success occurred in establishing QI Committees and targeting preventable hospital readmissions, as well as implementing INTERACT tools in all SNFs; however, hospital readmission rates decreased in only 2 facilities. QIO staff and SNF leaders noted the ongoing challenge of engaging already busy SNF staff and leadership in QI activities. SNF leaders reported that they appreciated the training and technical assistance that their institutions received, although most noted that additional support was needed to bring about improvement in readmission rates. This process evaluation documented mixed clinical results but successfully identified opportunities to improve recruitment of and provision of technical support to participating SNFs. Recommendations are offered for others who wish to conduct similar projects. Copyright © 2015 AMDA – The Society for Post-Acute and Long-Term Care Medicine. All rights reserved.

On-line Naval Engineering Skills Supplemental Training Program

DTIC Science & Technology

2010-01-01

Defense Technical University ( DTU ), the technical content for courses would have to be provided by the Naval technical authorities...of technological knowledge related to design engineering such as the DTU , or expanded within the mission scope of an existing organization such as...management program as a training tool for naval design engineers such as the DTU or a technical extension of the DAU program for acquisition training

Integral Engine Inlet Particle Separator. Volume 2. Design Guide

DTIC Science & Technology

1975-08-01

herein will be used in the design of integral inlet particle separators for future Army aircraft gas turbine engines . Apprupriate technical personnel...OF INTEGRAL GAS TURBINE ENGINE SOLID PARTICLE INLET SEPARATORS, PHASE I, FEASIBILITY STUDY AND DESIGN, Pratt and Whitney Aircraft ; USAAVLABS Technical...USAAVLABS Technical Report 70-36, U.S. Army Aviation Materiel Laboratories, Fort Eustis, Virginia, August 1970 AD 876 584. 13. ENGINES , AIRCRAFT

Technical note: Design flood under hydrological uncertainty

NASA Astrophysics Data System (ADS)

Botto, Anna; Ganora, Daniele; Claps, Pierluigi; Laio, Francesco

2017-07-01

Planning and verification of hydraulic infrastructures require a design estimate of hydrologic variables, usually provided by frequency analysis, and neglecting hydrologic uncertainty. However, when hydrologic uncertainty is accounted for, the design flood value for a specific return period is no longer a unique value, but is represented by a distribution of values. As a consequence, the design flood is no longer univocally defined, making the design process undetermined. The Uncertainty Compliant Design Flood Estimation (UNCODE) procedure is a novel approach that, starting from a range of possible design flood estimates obtained in uncertain conditions, converges to a single design value. This is obtained through a cost-benefit criterion with additional constraints that is numerically solved in a simulation framework. This paper contributes to promoting a practical use of the UNCODE procedure without resorting to numerical computation. A modified procedure is proposed by using a correction coefficient that modifies the standard (i.e., uncertainty-free) design value on the basis of sample length and return period only. The procedure is robust and parsimonious, as it does not require additional parameters with respect to the traditional uncertainty-free analysis. Simple equations to compute the correction term are provided for a number of probability distributions commonly used to represent the flood frequency curve. The UNCODE procedure, when coupled with this simple correction factor, provides a robust way to manage the hydrologic uncertainty and to go beyond the use of traditional safety factors. With all the other parameters being equal, an increase in the sample length reduces the correction factor, and thus the construction costs, while still keeping the same safety level.

Stakeholder analysis for adopting a personal health record standard in Korea.

PubMed

Kang, Min-Jeoung; Jung, Chai Young; Kim, Soyoun; Boo, Yookyung; Lee, Yuri; Kim, Sundo

Interest in health information exchanges (HIEs) is increasing. Several countries have adopted core health data standards with appropriate strategies. This study was conducted to determine the feasibility of a continuity of care record (CCR) as the standard for an electronic version of the official transfer note and the HIE in Korean healthcare. A technical review of the CCR standard and analysis of stakeholders' views were undertaken. Transfer notes were reviewed and matched with CCR standard categories. The standard for the Korean coding system was selected. Stakeholder analysis included an online survey of members of the Korean Society of Medical Informatics, a public hearing to derive opinions of consumers, doctors, vendors, academic societies and policy makers about the policy process, and a focus group meeting with EMR vendors to determine which HIE objects were technically applicable. Data objects in the official transfer note form matched CCR standards. Korean Classification of Diseases, Korean Standard Terminology of Medicine, Electronic Data Interchange code (EDI code), Logical Observation Identifiers Names and Codes, and Korean drug codes (KD code) were recommended as the Korean coding standard.'Social history', 'payers', and 'encounters' were mostly marked as optional or unnecessary sections, and 'allergies', 'alerts', 'medication list', 'problems/diagnoses', 'results',and 'procedures' as mandatory. Unlike the US, 'social history' was considered optional and 'advance directives' mandatory.At the public hearing there was some objection from the Korean Medical Association to the HIE on legal grounds in termsof intellectual property and patients' personal information. Other groups showed positive or neutral responses. Focus group members divided CCR data objects into three phases based onpredicted adoption time in CCR: (i) immediate adoption; (ii) short-term adoption ('alerts', 'family history'); and (iii) long-term adoption ('results', 'advanced directives', 'functional status', 'medical equipment', 'vital signs', 'plan of care', 'social history'). There were no technical problems in generating the CCR standard document from EMRs. Matters of concern that arose from study results should be resolved with time and consultation.

Atlas of point correlations at 30 mb and between 500 and 30 mb

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loon, H. van; Shea, D.J.

1992-12-01

The National Center for Atmospheric Research has issued a technical note (Shea et al. 1992) with point correlations (teleconnections) on the 30-mb surface and between 500 and 30 mb. The correlations are for the two-month means January-February, March-April, July-August, and November-December, which were chosen because of these characteristics of the intraseasonal change in the stratosphere: (a) At 30 mb the annual cooling at higher latitudes often ends in December, which therefore is on an average-the coldest month at these latitudes. (b) Major midwinter warnings, during which the polar low is replaced by a high, nearly all occur in January-February. (c)more » The final (spring) warming of the lower stratosphere takes place in March-April. The correlations are based on two well-known datasets: the monthly mean temperatures and geopotential heights at 30 mb, derived from the daily historical maps from the Stratospheric Research Group, 11 monthly mean geopotential heights at 500 mb from the National Meteorological Center, Washington, D.C. The 500- and 30-mb heights span the years 1957-1988, and the 30-mb temperatures, the years 1964-1988. The teleconnection maps cover the region between 15[degrees]N and the North Pole. Correlations were also computed for the two halves of the period to spot any differences between them, but there were only minor or no differences. Examples of the point correlations are described below to indicate the type of material available in the technical note. The 5% local significance level for a sample of 31 is r= 0.36, and for n = 16 it is r= 0.52. The January 30-mb mean map should be used as a reference for the correlations. The technical note is available free of charge from NCAR, Information and Education Outreach Program, P.O. Box 3000, Boulder, CO 80307.« less

Middlesex Community College Software Technical Writing Program.

ERIC Educational Resources Information Center

Middlesex Community Coll., Bedford, MA.

This document describes the Software Technical Writing Program at Middlesex Community College (Massachusetts). The program is a "hands-on" course designed to develop job-related skills in three major areas: technical writing, software, and professional skills. The program was originally designed in cooperation with the Massachusetts High…

78 FR 46546 - Design-Build Contracting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-01

...-0043] RIN 2125-AF58 Design-Build Contracting AGENCY: Federal Highway Administration (FHWA), DOT. ACTION... alternative technical concepts (ATC) in design-build project delivery of highway construction. The revisions... design-build proposers to submit ATCs in their technical and price proposals. The FHWA seeks comments on...

78 FR 33863 - Relationship Between General Design Criteria and Technical Specification Operability

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-05

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0179] Relationship Between General Design Criteria and...) 2013-05, ``NRC Position on the Relationship Between General Design Criteria and Technical Specification Operability.'' This RIS clarifies the NRC staff's position on the relationship between the general design...

Stafford Technical Center: Designing a Future for Architects and Builders

ERIC Educational Resources Information Center

Lucci, William, Jr.

2005-01-01

In this article, the author describes Stafford Technical Center's Engineering Technology Academy (ETA), in which students pursue a variety of educational and career options for anything connected to construction technologies--including drafting and design, architecture, and even work in historic preservation. In addition to technical skills,…

Comment on Black's (1993) article, "comparing genuine and simulated suicide notes: a new perspective".

PubMed

Diamond, G M; More, D L; Hawkins, A G; Soucar, E

1995-02-01

The recent article by Stephen T. Black (1993) comparing genuine suicide notes with simulated notes is examined here. This article corrected a sampling error made in the original study by E. S. Shneidman and N. Farberow (1957), but Black's design suffers from theoretical and methodological problems that render it uninterpretable: First, no theoretical background is elaborated, and no hypotheses are offered. Second, no constructs are operationalized, and no predictions are tested. In the present article, the operational design is critiqued, and then it is suggested that the study of suicide notes in this fashion should cease.

Technical Review Report for the Model 9978-96 Package Safety Analysis Report for Packaging (S-SARP-G-00002, Revision 1, March 2009)

DOE Office of Scientific and Technical Information (OSTI.GOV)

West, M

2009-03-06

This Technical Review Report (TRR) documents the review, performed by Lawrence Livermore National Laboratory (LLNL) Staff, at the request of the Department of Energy (DOE), on the 'Safety Analysis Report for Packaging (SARP), Model 9978 B(M)F-96', Revision 1, March 2009 (S-SARP-G-00002). The Model 9978 Package complies with 10 CFR 71, and with 'Regulations for the Safe Transport of Radioactive Material-1996 Edition (As Amended, 2000)-Safety Requirements', International Atomic Energy Agency (IAEA) Safety Standards Series No. TS-R-1. The Model 9978 Packaging is designed, analyzed, fabricated, and tested in accordance with Section III of the American Society of Mechanical Engineers Boiler and Pressuremore » Vessel Code (ASME B&PVC). The review presented in this TRR was performed using the methods outlined in Revision 3 of the DOE's 'Packaging Review Guide (PRG) for Reviewing Safety Analysis Reports for Packages'. The format of the SARP follows that specified in Revision 2 of the Nuclear Regulatory Commission's Regulatory Guide 7.9, i.e., 'Standard Format and Content of Part 71 Applications for Approval of Packages for Radioactive Material'. Although the two documents are similar in their content, they are not identical. Formatting differences have been noted in this TRR, where appropriate. The Model 9978 Packaging is a single containment package, using a 5-inch containment vessel (5CV). It uses a nominal 35-gallon drum package design. In comparison, the Model 9977 Packaging uses a 6-inch containment vessel (6CV). The Model 9977 and Model 9978 Packagings were developed concurrently, and they were referred to as the General Purpose Fissile Material Package, Version 1 (GPFP). Both packagings use General Plastics FR-3716 polyurethane foam as insulation and as impact limiters. The 5CV is used as the Primary Containment Vessel (PCV) in the Model 9975-96 Packaging. The Model 9975-96 Packaging also has the 6CV as its Secondary Containment Vessel (SCV). In comparison, the Model 9975 Packagings use Celotex{trademark} for insulation and as impact limiters. To provide a historical perspective, it is noted that the Model 9975-96 Packaging is a 35-gallon drum package design that has evolved from a family of packages designed by DOE contractors at the Savannah River Site. Earlier package designs, i.e., the Model 9965, the Model 9966, the Model 9967, and the Model 9968 Packagings, were originally designed and certified in the early 1980s. In the 1990s, updated package designs that incorporated design features consistent with the then-newer safety requirements were proposed. The updated package designs at the time were the Model 9972, the Model 9973, the Model 9974, and the Model 9975 Packagings, respectively. The Model 9975 Package was certified by the Packaging Certification Program, under the Office of Safety Management and Operations. The Model 9978 Package has six Content Envelopes: C.1 ({sup 238}Pu Heat Sources), C.2 ( Pu/U Metals), C.3 (Pu/U Oxides, Reserved), C.4 (U Metal or Alloy), C.5 (U Compounds), and C.6 (Samples and Sources). Per 10 CFR 71.59 (Code of Federal Regulations), the value of N is 50 for the Model 9978 Package leading to a Criticality Safety Index (CSI) of 1.0. The Transport Index (TI), based on dose rate, is calculated to be a maximum of 4.1.« less

Design mentoring tool : [technical summary].

DOT National Transportation Integrated Search

2011-01-01

In 2004 a design engineer on-line mentoring tool was developed and implemented The purpose of the tool was to assist senior engineers mentoring new engineers to the INDOT design process and improve their technical competency. This approach saves seni...

Start Up Application Concerns with Field Programmable Gate Arrays (FPGAs)

NASA Technical Reports Server (NTRS)

Katz, Richard B.

1999-01-01

This note is being published to improve the visibility of this subject, as we continue to see problems surface in designs, as well as to add additional information to the previously published note for design engineers. The original application note focused on designing systems with no single point failures using Actel Field Programmable Gate Arrays (FPGAs) for critical applications. Included in that note were the basic principles of operation of the Actel FPGA and a discussion of potential single-point failures. The note also discussed the issue of startup transients for that class of device. It is unfortunate that we continue to see some design problems using these devices. This note will focus on the startup properties of certain electronic components, in general, and current Actel FPGAs, in particular. Devices that are "power-on friendly" are currently being developed by Actel, as a variant of the new SX series of FPGAs. In the ideal world, electronic components would behave much differently than they do in the real world, The chain, of course, starts with the power supply. Ideally, the voltage will immediately rise to a stable V(sub cc) level, of course, it does not. Aside from practical design considerations, inrush current limits of certain capacitors must be observed and the power supply's output may be intentionally slew rate limited to prevent a large current spike on the system power bus. In any event, power supply rise time may range from less than I msec to 100 msec or more.

European Science Notes, volume 40, number 2

NASA Astrophysics Data System (ADS)

Shaffer, L. E.

1986-02-01

ESN is a monthly publication with brief articles on recent developments in European scientific research. Its partial contents are: Biotechnology Research at GBF, and at the Inst. of Technical Chemistry, Univ. of Hanover, West Germany; 7th European Immunology Congress; Biotechnia '85 - First International Congress for Biotechnology; Acoustic Cavitation Generated by Clinical Ultrasound; Advances in Chemical Reaction Dynamics; Geophysics Research in Israel; Fiber Composite Research at Paisley College of Technology, Scotland; A review of International Research on the Physical Metallurgy of Welding; Silicon Metallurgy at the Helsinki Technical Univ.; A Conference on Guided Optical Structures and Their Applications; Optoelectronics Research at Oxford Univ.; and Fractal Conferences in Europe.

Temporary cerebral revascularization using a radial artery in the hand-eyeshade posture: technical note.

PubMed

Hiramoto, Jun; Tanaka, Yuichiro

2014-06-17

Kamiyama introduced a unique method of temporary cerebral revascularization using a radial artery graft (RAG) in his technical review. We tried original method with Sugita frame, and pointed out some disadvantages that include to avoid taking instruments or hands in and out, stability of hands, and unrestricted usage of brain retractors during temporary bypass between radial artery and M2 potion of middle cerebral artery (RA-M2 bypass). To solve those disadvantages, especially for Sugita head frame users, we here present a modified Kamiyama's method of temporary cerebral revascularization with the forearm elevated over the face like as hand-eyeshade posture.

7 CFR 1709.123 - Evaluation criteria and weights.

Code of Federal Regulations, 2010 CFR

2010-01-01

... design and technical merit criteria shall not be less than 65 percent of the total available points, and... announcement. (b) Project design and technical merit. In reviewing the grant proposal's project design and... the proposed design, construction, equipment and materials for the proposed energy facilities to...

Engineering Technical Review Planning Briefing

NASA Technical Reports Server (NTRS)

Gardner, Terrie

2012-01-01

The general topics covered in the engineering technical planning briefing are 1) overviews of NASA, Marshall Space Flight Center (MSFC), and Engineering, 2) the NASA Systems Engineering(SE) Engine and its implementation , 3) the NASA Project Life Cycle, 4) MSFC Technical Management Branch Services in relation to the SE Engine and the Project Life Cycle , 5) Technical Reviews, 6) NASA Human Factor Design Guidance , and 7) the MSFC Human Factors Team. The engineering technical review portion of the presentation is the primary focus of the overall presentation and will address the definition of a design review, execution guidance, the essential stages of a technical review, and the overall review planning life cycle. Examples of a technical review plan content, review approaches, review schedules, and the review process will be provided and discussed. The human factors portion of the presentation will focus on the NASA guidance for human factors. Human factors definition, categories, design guidance, and human factor specialist roles will be addressed. In addition, the NASA Systems Engineering Engine description, definition, and application will be reviewed as background leading into the NASA Project Life Cycle Overview and technical review planning discussion.

Preparing and Presenting Effective Research Posters

PubMed Central

Miller, Jane E

2007-01-01

Objectives Posters are a common way to present results of a statistical analysis, program evaluation, or other project at professional conferences. Often, researchers fail to recognize the unique nature of the format, which is a hybrid of a published paper and an oral presentation. This methods note demonstrates how to design research posters to convey study objectives, methods, findings, and implications effectively to varied professional audiences. Methods A review of existing literature on research communication and poster design is used to identify and demonstrate important considerations for poster content and layout. Guidelines on how to write about statistical methods, results, and statistical significance are illustrated with samples of ineffective writing annotated to point out weaknesses, accompanied by concrete examples and explanations of improved presentation. A comparison of the content and format of papers, speeches, and posters is also provided. Findings Each component of a research poster about a quantitative analysis should be adapted to the audience and format, with complex statistical results translated into simplified charts, tables, and bulleted text to convey findings as part of a clear, focused story line. Conclusions Effective research posters should be designed around two or three key findings with accompanying handouts and narrative description to supply additional technical detail and encourage dialog with poster viewers. PMID:17355594

Nationwide Drinking Water Sampling Campaign for Exposure Assessments in Denmark

PubMed Central

Voutchkova, Denitza Dimitrova; Hansen, Birgitte; Ernstsen, Vibeke; Kristiansen, Søren Munch

2018-01-01

Nationwide sampling campaign of treated drinking water of groundwater origin was designed and implemented in Denmark in 2013. The main purpose of the sampling was to obtain data on the spatial variation of iodine concentration and speciation in treated drinking water, which was supplied to the majority of the Danish population. This data was to be used in future exposure and epidemiologic studies. The water supply sector (83 companies, owning 144 waterworks throughout Denmark) was involved actively in the planning and implementation process, which reduced significantly the cost and duration of data collection. The dataset resulting from this collaboration covers not only iodine species (I−, IO3−, TI), but also major elements and parameters (pH, electrical conductivity, DOC, TC, TN, F−, Cl−, NO3−, SO42−, Ca2+, Mg2+, K+, Na+) and a long list of trace elements (n = 66). The water samples represent 144 waterworks abstracting about 45% of the annual Danish groundwater abstraction for drinking water purposes, which supply about 2.5 million Danes (45% of all Danish residents). This technical note presents the design, implementation, and limitations of such a sampling design in detail in order (1) to facilitate the future use of this dataset, (2) to inform future replication studies, or (3) to provide an example for other researchers. PMID:29518987

Technical note: development of a quantitative PCR method for monitoring strain dynamics during yogurt manufacture.

PubMed

Miller, D M; Dudley, E G; Roberts, R F

2012-09-01

Yogurt starter cultures may consist of multiple strains of Lactobacillus delbrueckii ssp. bulgaricus (LB) and Streptococcus thermophilus (ST). Conventional plating methods for monitoring LB and ST levels during yogurt manufacture do not allow for quantification of individual strains. The objective of the present work was to develop a quantitative PCR method for quantification of individual strains in a commercial yogurt starter culture. Strain-specific primers were designed for 2 ST strains (ST DGCC7796 and ST DGCC7710), 1 LB strain (DGCC4078), and 1 Lactobacillus delbrueckii ssp. lactis strain (LL; DGCC4550). Primers for the individual ST and LB strains were designed to target unique DNA sequences in clustered regularly interspersed short palindromic repeats. Primers for LL were designed to target a putative mannitol-specific IIbC component of the phosphotransferase system. Following evaluation of primer specificity, standard curves relating cell number to cycle threshold were prepared for each strain individually and in combination in yogurt mix, and no significant differences in the slopes were observed. Strain balance data was collected for yogurt prepared at 41 and 43°C to demonstrate the potential application of this method. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Science and Technology Community in Crisis

DTIC Science & Technology

2002-05-01

centralized, highly bureaucratic, support system that considers itself an end, a point noted in the management literature by Peter Drucker :48 “What...Review Quarterly, Spring 2000. 48 Drucker , Peter F., Management : Tasks, Responsibilities, Practices, Apr 1993. 43 regionalization of personnel...technical areas as information technology, biotechnology, nanotechnology, etc. Peter Drucker , the well-known management expert once commented: “In

7. PHOTOCOPY OF DRAWING (UNDATED PLAN AND SCHEDULE DRAWING BY ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. PHOTOCOPY OF DRAWING (UNDATED PLAN AND SCHEDULE DRAWING BY THE DEPARTMENT OF THE AIR FORCE, SPACE AND MISSILE TEST CENTER) MATERIAL SPECIFICATIONS AND GENERAL NOTES FOR INTERIOR FINISHING FOR BUILDING 762-A, SHEET A4 - Vandenberg Air Force Base, Space Launch Complex 3, Technical Support Building, Napa & Alden Roads, Lompoc, Santa Barbara County, CA

Temporalis myofascial repair of traumatic defects of the anterior fossa. Technical note.

PubMed

Gillespie, R P; Shagets, F W; de los Reyes, R A

1986-06-01

Bilateral temporalis myofascial flaps in continuity with frontal periosteum can be used in repairing extensive dural and bone defects of the anterior cranial fossa floor. The technique of preserving and using this flap is described and offers an alternative to the use of frontal pericranial tissue for repair of anterior dural defects.

Relationships between Electronic Information Media and Records Management Practices: Results of a Survey of United Nations Organizations. A Rand Note.

ERIC Educational Resources Information Center

Bikson, T. K.; Schieber, L.

A Technical Panel on Electronic Records Management (TP/REM), which was established by the Advisory Committee for the Co-ordination of Information Systems (ACCIS), conducted a survey of existing electronic records management practices and standards related to new information and communication technologies and their interrelationships within the…

Mission Engineering Competencies Technical Report

DTIC Science & Technology

2018-04-30

generate a mission capability. Note that foundational skills – e.g. math , natural or social sciences, general engineering skills - are not listed in...basic understanding of math , sciences, and the fundamentals of engineering are assumed, the foundational building block for mission...April 30, 2018 69 The Helix model focuses on 6 proficiency areas (Hutchison et al. 2018): 1. Math /Science/General

A Review of Personalised E-Learning: Towards Supporting Learner Diversity

ERIC Educational Resources Information Center

O'Donnell, Eileen; Lawless, Séamus; Sharp, Mary; Wade, Vincent P.

2015-01-01

The realisation of personalised e-learning to suit an individual learner's diverse learning needs is a concept which has been explored for decades, at great expense, but is still not achievable by non-technical authors. This research reviews the area of personalised e-learning and notes some of the technological challenges which developers may…

Evaluating selected demographic factors related to consumer preferences for furniture from commercial and from underutilized species

Treesearch

David Nicholls; Matthew Bumgardner

2007-01-01

This technical note describes consumer preferences within selected demographic categories in two major Pacific Northwest markets for six domestic wood species. These woods were considered for construction of four furniture pieces. Chi-square tests were performed to determine species preferences based on gender, age, and income. Age and income were statistically...

Evaluating selected demographic factors related to consumer preferences for furniture from commercial and from underutilized species.

Treesearch

David Nicholls; Matthew Bumgardner

2007-01-01

This technical note describes consumer preferences within selected demographic categories in two major Pacific Northwest markets for six domestic wood species. These woods were considered for construction of four furniture pieces. Chi-square tests were performed to determine species preferences based on gender, age, and income. Age and income were statistically...

SWRL Music Program: Ethnic Song Selection and Distribution. Technical Note.

ERIC Educational Resources Information Center

Williams, David Brian

Current elementary music education approaches to the distribution and selection of ethnic folk song in music programs are surveyed and each approach is reviewed on the basis of its utility for the Southwest Regional Laboratory Music Program. The first approach, a traditional point of view, is based on the premise that music education has a…

78 FR 17313 - Ninety-Day Waiting Period Limitation and Technical Amendments to Certain Health Coverage...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-21

... Health Benefits Annual Survey (the ``2012 Kaiser Survey'') finds that only eight percent of covered... would note that it is unlikely that the survey defines the term ``waiting period'' in the same manner as... employee's start date, and it seems unlikely that the 2012 Kaiser Survey would have included the...

Direct Loans: A Better Way To Borrow. William D. Ford Federal Direct Loan Program.

ERIC Educational Resources Information Center

Department of Education, Washington, DC. Student Financial Assistance.

The Web site http://www.ed.gov/DirectLoan/ provides information on the William D. Ford Federal Direct Loan Program for both professionals and borrowers. For professionals, it provides information on conferences, promissory notes, regulations, laws, and relevant links, as well as technical assistance, and other publications and guides. For…

Stimulating Physical Development of Mentally Retarded Children. Mental Retardation Training Program Technical Report Series 70-3.

ERIC Educational Resources Information Center

Stein, Julian U.; And Others

Four papers presented at an all-day workshop at Ohio State University focus on stimulating the physical development of mentally retarded children. Noted in the introduction is importance of cooperation between university training programs and facilities serving the mentally handicapped. Julian Stein discusses the physical and motor development of…

Adjustment Notes for Apprentice and Trainee Estimates. Technical Paper

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

Apprentice and trainee data are reported by the State and Territory Training Authorities to the National Centre for Vocational Education Research (NCVER) on a quarterly basis, starting at the September quarter of 1994. The set of data submitted that quarter is referred to as Collection 1. The sets of data submitted in subsequent quarters are…

Adjustment Notes for Apprentice and Trainee Estimates. Technical Paper

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2011

2011-01-01

Apprentice and trainee data are reported by the State and Territory Training Authorities to NCVER (National Centre for Vocational Education Research) on a quarterly basis, starting at the September quarter of 1994. The set of data submitted that quarter is referred to as Collection 1. The sets of data submitted in subsequent quarters are referred…

Adjustment Notes for Apprentice and Trainee Estimates. Technical Paper

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

Apprentice and trainee data are reported by the State and Territory Training Authorities to National Centre for Vocational Education Research (NCVER) on a quarterly basis, starting at the September quarter of 1994. The set of data submitted that quarter is referred to as Collection 1. The sets of data submitted in subsequent quarters are referred…

Neural Network Classifier Architectures for Phoneme Recognition. CRC Technical Note No. CRC-TN-92-001.

ERIC Educational Resources Information Center

Treurniet, William

A study applied artificial neural networks, trained with the back-propagation learning algorithm, to modelling phonemes extracted from the DARPA TIMIT multi-speaker, continuous speech data base. A number of proposed network architectures were applied to the phoneme classification task, ranging from the simple feedforward multilayer network to more…

Technical Note: Comparison of accelerated methods for evaluating leaching from preservative-treated wood

Treesearch

Stan T. Lebow; Patricia K. Lebow; Kolby C. Hirth

2017-01-01

Current standardized methods are not well-suited for estimating in-service preservative leaching from treated wood products. This study compared several alternative leaching methods to a commonly used standard method, and to leaching under natural exposure conditions. Small blocks or lumber specimens were pressure treated with a wood preservative containing borax and...

East Europe Report.

DTIC Science & Technology

1986-09-12

widespread introduction of waste-free technologies or technologies producing small amounts of waste, and there are still serious things to be done also...19980729 041 FBIS FOREIGN BROADCAST INFORMATION SERVICE REPRODUCED BY U.S. DEPARTMENT OF COMMERCE NATIONAL TECHNICAL INFORMATION SERVICE SPRINGFIELD...VA. 22161 107 NOTE JPRS publications contain information primarily from foreign newspapers, periodicals and books, but also from news agency

Jet Crackle

DTIC Science & Technology

2015-06-23

DISTRIBUTION/AVAILABILITY STATEMENT DISTRIBUTION A 13. SUPPLEMENTARY NOTES 14. ABSTRACT Fighter jets and other aircraft with high specific thrust engines...interim, memorandum, master’s thesis , progress, quarterly, research, special, group study, etc. 3. DATES COVERED. Indicate the time during which the...State the type of report, such as final, technical, interim, memorandum, master’s thesis , progress, quarterly, research, special, group study, etc

Dynaflow User’s Guide

DTIC Science & Technology

1988-11-01

264 ANALYSIS RESTART. ............. ..... ....... 269 1.0 TITLE CARD. .............. ............. 271 2.0 CONTROL CARDS...stress soil model will provide a tool for such analysis of waterfront structures. To understand the significance of liquefaction, it is important to note...Implementing this effective stress soil model into a finite element computer program would allow analysis of soil and structure together. TECHNICAL BACKGROUND

78 FR 35349 - Self-Regulatory Organizations; Miami International Securities Exchange LLC; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-12

... Transaction Fees. The Exchange notes that the proposal will have no effect on other fees and dues that may apply to Market Makers including marketing fees, Options Regulatory Fees, market data, and membership...). The proposed rule change will take effect on June 3, 2013. Technical Change In addition to the changes...

Common Elements of Risk

DTIC Science & Technology

2006-04-01

8 Figure 5 : Threat and Operational Risk .................................................................... 9 Figure 6: Work Process...technical note might be applied to selected risk management topics. Finally, Section 5 , “Conclusion,” completes the report by summarizing the history...addressed in Section 5 . CMU/SEI-2006-TN-014 5 So far, our discussion has focused on the conceptual aspects of risk . The next section explores risk’s

Authorship, Gender, and Institutional Affiliation in Library History: The Case of "Libraries & Culture."

ERIC Educational Resources Information Center

Herubel, Jean-Pierre V. M.

1991-01-01

Describes a study that examined two characteristics of authorship--the gender of the authors and their institutional affiliation--to see who is producing published research in the field of library history. The results of an analysis of articles, technical notes, and reviews from 23 years of "Library and Culture" are discussed. (two…

[Expansive suboccipital cranioplasty in Chiari 1 malformation (a case report and technical notes)].

PubMed

Korshunov, A E; Kushel', Yu V

In this case report, we describe the use of expansive suboccipital cranioplasty in Chiari-1 malformation. The technique improves the efficacy and safety of treatment for Chiari-1 malformation. The technique can be used as an adjunct treatment together with any variant of posterior fossa decompression, including duroplasty and extradural decompression.

Writing Material in Chemical Physics Research: The Laboratory Notebook as Locus of Technical and Textual Integration

ERIC Educational Resources Information Center

Wickman, Chad

2010-01-01

This article, drawing on ethnographic study in a chemical physics research facility, explores how notebooks are used and produced in the conduct of laboratory science. Data include written field notes of laboratory activity; visual documentation of "in situ" writing processes; analysis of inscriptions, texts, and material artifacts produced in the…

VIEWDATA--Interactive Television, with Particular Emphasis on the British Post Office's PRESTEL.

ERIC Educational Resources Information Center

Rimmer, Tony

An overview of "Viewdata," an interactive medium that connects the home or business television set with a central computer database through telephone lines, is presented in this paper. It notes how Viewdata differs from broadcast Teletext systems and reviews the technical aspects of the two media to clarify terminology used in the…

Technical Note: Asteroid Detection Demonstration from SkySat-3 - B612 Data Using Synthetic Tracking

NASA Technical Reports Server (NTRS)

Zhai, C.; Shao, M.; Lai, S.; Boerner, P.; Dyer, J.; Lu, E.; Reitsema, H.; Buie, M.

2018-01-01

We report results from analyzing the data taken by the sCMOS cameras on board of SkySat3 using the synthetic tracking technique. The analysis demonstrates the expected sensitivity improvement in the signal-to-noise ratio of the faint asteroids from properly stacking up the short exposure images in post-processing.

SUMMARY REPORT FOR THE NATIONAL ATMOSPHERIC DEPOSITION PROGRAM/NATIONAL TRENDS NETWORK (NADP/NTN) SITE VISITATION PROGRAM FOR THE PERIOD OCTOBER 1987 THROUGH SEPTEMBER 1988

EPA Science Inventory

The U.S Environmental Protection Agency (EPA) provides technical assistance to the NADP/NTN network through a site visitation program. esearch Triangle Institute, as contractor to EPA, conducts these visits. f deficiencies or nonstandard procedures are noted, the site operator an...

FY 1991 RDT&E Descriptive Summaries

DTIC Science & Technology

1990-01-01

OF PROJECT : The Defense Sciences program element provides the technical foundation for long-term improvements in military equiment...DESCRIPTION OF PROJECT : Develop the fundamental technology in advanced digital structures and network concepts for smaller, more powerful, less expensive...DESCRIPTION OF PROJECT : The 1985 Defense Science Board (DSB) noted that the United States was behind and failing further behind in armor and

What Do Writers in Industry Write?

ERIC Educational Resources Information Center

Locker, Kitty O.

Noting that one of the biggest factors in motivating students in technical writing classes is to convince them that they will need to write in their future jobs, this paper offers evidence for use by teachers in persuading students of the importance of developing their writing skills. The first part of the paper presents refutations of some of the…

Independent Research and Independent Exploratory Development Annual Report Fiscal Year 1975

DTIC Science & Technology

1975-09-01

and Coding Study.(Z?80) ................................... ......... .................... 40 Optical Cover CMMUnicallor’s Using Laser Transceiverst...Using Auger Spectroscopy and PUBLICATIONS Additional Advanced Analytical Techniques," Wagner, N. K., "Auger Electron Spectroscopy NELC Technical Note 2904...K.. "Analysis of Microelectronic Materials Using Auger Spectroscopy and Additional Advanced Analytical Techniques," Contact: Proceedings of the

Making intelligent systems team players: Overview for designers

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Schreckenghost, Debra L.

1992-01-01

This report is a guide and companion to the NASA Technical Memorandum 104738, 'Making Intelligent Systems Team Players,' Volumes 1 and 2. The first two volumes of this Technical Memorandum provide comprehensive guidance to designers of intelligent systems for real-time fault management of space systems, with the objective of achieving more effective human interaction. This report provides an analysis of the material discussed in the Technical Memorandum. It clarifies what it means for an intelligent system to be a team player, and how such systems are designed. It identifies significant intelligent system design problems and their impacts on reliability and usability. Where common design practice is not effective in solving these problems, we make recommendations for these situations. In this report, we summarize the main points in the Technical Memorandum and identify where to look for further information.

Lateral supraorbital approach to ipsilateral PCA-P1 and ICA-PCoA aneurysms

PubMed Central

Goehre, Felix; Jahromi, Behnam Rezai; Elsharkawy, Ahmed; Lehto, Hanna; Shekhtman, Oleg; Andrade-Barazarte, Hugo; Munoz, Francisco; Hijazy, Ferzat; Makhkamov, Makhkam; Hernesniemi, Juha

2015-01-01

Background: Aneurysms of the posterior cerebral artery (PCA) are rare and often associated with anterior circulation aneurysms. The lateral supraorbital approach allows for a very fast and safe approach to the ipsilateral lesions Circle of Willis. A technical note on the successful clip occlusion of two aneurysms in the anterior and posterior Circle of Willis via this less invasive approach has not been published before. The objective of this technical note is to describe the simultaneous microsurgical clip occlusion of an ipsilateral PCA-P1 and an internal carotid artery - posterior communicating artery (ICA-PCoA) aneurysm via the lateral supraorbital approach. Case Description: The authors present a technical report of successful clip occlusions of ipsilateral located PCA-P1 and ICA-PCoA aneurysms. A 59-year-old female patient was diagnosed with a PCA-P1 and an ipsilateral ICA-PCoA aneurysm by computed tomography angiography (CTA) after an ischemic stroke secondary to a contralateral ICA dissection. The patient underwent microsurgical clipping after a lateral supraorbital craniotomy. The intraoperative indocyanine green (ICG) videoangiography and the postoperative CTA showed a complete occlusion of both aneurysms; the parent vessels (ICA and PCA) were patent. The patient presents postoperative no new neurologic deficit. Conclusion: The lateral supraorbital approach is suitable for the simultaneous microsurgical treatment of proximal anterior circulation and ipsilateral proximal PCA aneurysms. Compared to endovascular treatment, direct visual control of brainstem perforators is possible. PMID:26060600

Strength conditions for the elastic structures with a stress error

NASA Astrophysics Data System (ADS)

Matveev, A. D.

2017-10-01

As is known, the constraints (strength conditions) for the safety factor of elastic structures and design details of a particular class, e.g. aviation structures are established, i.e. the safety factor values of such structures should be within the given range. It should be noted that the constraints are set for the safety factors corresponding to analytical (exact) solutions of elasticity problems represented for the structures. Developing the analytical solutions for most structures, especially irregular shape ones, is associated with great difficulties. Approximate approaches to solve the elasticity problems, e.g. the technical theories of deformation of homogeneous and composite plates, beams and shells, are widely used for a great number of structures. Technical theories based on the hypotheses give rise to approximate (technical) solutions with an irreducible error, with the exact value being difficult to be determined. In static calculations of the structural strength with a specified small range for the safety factors application of technical (by the Theory of Strength of Materials) solutions is difficult. However, there are some numerical methods for developing the approximate solutions of elasticity problems with arbitrarily small errors. In present paper, the adjusted reference (specified) strength conditions for the structural safety factor corresponding to approximate solution of the elasticity problem have been proposed. The stress error estimation is taken into account using the proposed strength conditions. It has been shown that, to fulfill the specified strength conditions for the safety factor of the given structure corresponding to an exact solution, the adjusted strength conditions for the structural safety factor corresponding to an approximate solution are required. The stress error estimation which is the basis for developing the adjusted strength conditions has been determined for the specified strength conditions. The adjusted strength conditions presented by allowable stresses are suggested. Adjusted strength conditions make it possible to determine the set of approximate solutions, whereby meeting the specified strength conditions. Some examples of the specified strength conditions to be satisfied using the technical (by the Theory of Strength of Materials) solutions and strength conditions have been given, as well as the examples of stress conditions to be satisfied using approximate solutions with a small error.

A new peer instruction method for teaching practical skills in the health sciences: an evaluation of the 'Learning Trail'.

PubMed

Dollman, James

2005-01-01

The 'Learning Trail' is an innovative application of peer-mediated instruction designed to enhance student learning in large practical classes. The strategy specifically seeks to improve participants' attention to details of protocol that are often difficult to observe during teacher-centered demonstrations to large groups. Students (n=68) at the University of South Australia trialed this strategy, in which instruction in anthropometric techniques is initiated by an instructor to a group of 3-4 students and then sent in 'waves' from one student group to the next. The final group in the sequence demonstrates the techniques to the instructor, who notes any departures from technical accuracy. As each technical module is flowing from group to group, the instructor initiates the next 'wave' with the first group, and the process is repeated until all of the relevant skills are processed. The final stage is a full class discussion during which sources of technical error are identified and resolved. In this trial, students taught skinfold measurement by the peer instructed method (PI; n=33) were compared with a traditionally instructed group (TI; n=35), in which the instructor was responsible for all information transfer. For each participant, technical errors of measurement (TEM) were calculated; the intra-tester TEM as a measure of reliability, and the inter-tester TEM, in which the student's measures are compared with those of a criterion anthropometrist to give an indication of validity. There were no differences between TI and PI groups on intra-tester TEM (p=0.24), but the PI group had a lower inter-tester TEM for pooled skinfold sites (p=0.006) and for one individual site (triceps; p=0.007), but not the other three sites. The time taken to complete the whole set of instructions did not differ between delivery modes. The results of this trial suggest that the peer-mediated strategy may be more effective than teacher-centered instruction in terms of technical accuracy in anthropometry.

Rethinking Technical Communication Pedagogy: A Poststructuralist View of Program and Course Design.

ERIC Educational Resources Information Center

Woolever, Kristin R.

Technical communication specialists today really have to be technology experts as well as effective writers--even their titles have changed to "information designers, information engineers, or document developers." Teachers of technical communication should be up to date in the classroom to meet the changing needs of the workplace.…

How to Improve the Design and Delivery of High-Quality Technical Assistance. Newsletter

ERIC Educational Resources Information Center

Center for Comprehensive School Reform and Improvement, 2005

2005-01-01

Educators often use the term technical assistance to define services delivered or received in the pursuit of school- and district-improvement initiatives. More specifically, technical assistance can be defined as any assistance that identifies, selects, or designs research-based solutions and practices to support school improvement (Mattson &…

1981 Bibliography of Technical Writing.

ERIC Educational Resources Information Center

Book, Virginia Alm; And Others

1982-01-01

Offers resources on technical writing published in 1981. Arranges the citations under the following categories: bibliographies, books, reviews, and articles on the profession; theory and philosophy; pedagogy; technical speech; research; designing degree programs; technical writing and the computer; writing technical articles and reports;…

Interior view, law library (note one of aluminum lamps designed ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior view, law library (note one of aluminum lamps designed by Jennwein is in the foreground; the murals were painted by Maurice Sterne) - United States Department of Justice, Constitution Avenue between Ninth & Tenth Streets, Northwest, Washington, District of Columbia, DC

Comparative analysis of public opinion research in the U.S. and Canada

NASA Astrophysics Data System (ADS)

Setlakwe, Linda; DiNunzio, Lisa A.

2004-06-01

Bank note producers are working to thwart the threat of counterfeit notes created using high resolution, digital image processing software and color output devices such as inkjet printers, color copiers, and scanners. Genuine notes must incorporate better overt and machine-readable security features that will reduce the chance of counterfeit notes being passed. Recently, Canada and the United States introduced newly designed bank notes that are intended to enable the general public to more easily distinguish genuine notes from counterfeits. The Bank of Canada (BoC) and the U.S. Department of Treasury"s Bureau of Engraving and Printing (BEP) have conducted similar market research projects to explore target audiences' perceptions and attitudes towards currency design and security features. This paper will present a comparative analysis of the two research projects, both of which were conducted using similar methodology. The results of these research studies assist in the selection of security features for future generations of bank notes.