Developments in Technical Education in the British Caribbean, 1940-60.

ERIC Educational Resources Information Center

Pemberton, S. Macpherson

The paper discusses developments in technical education in the British West Indies from 1940-1960 emphasizing the relation between education and economic development. The objective is to analyze the economic basis of progress in technical education. The document is presented in four chapters. Chapter I summarizes historical background prior to…

(Review Draft) Radiation Site Cleanup Regulations: Technical Support Document For The Development Of Radionuclide Cleanup Levels For Soil

EPA Pesticide Factsheets

This document describes parts of the technical analysis being undertaken in support of standards that ensure certain sites are cleaned up to a level that is protective of human health and the environment before they are released for public use.

Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Wei; Gowri, Krishnan; Lane, Michael D.

2009-09-28

This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

The Apollo experiment for document delivery via satellite communication

NASA Astrophysics Data System (ADS)

1985-03-01

Dutch participation possibilities in the Apollo document delivery project, wishes and idea's of potential user and tender groups, and plans and activities of Dutch institutes and companies, are surveyed. The Apollo storage and transport system, demand and administration network, potential markets, and subject areas of the documents are investigated. Utilization areas (scientific, technical, administration, and business information) are listed. High tariffs and the lack of necessary provision make a direct participation strategy impossible. However, in the experimental phase, Dutch companies must be allowed to contribute in technical developments and availability of organizational and technical facilities must be stimulated.

Test Technical Manual 2014 GED® Test

ERIC Educational Resources Information Center

GED Testing Service, 2014

2014-01-01

This manual was written to provide technical information regarding the General Educational Development (GED®) test as evidence that the GED® test is technically sound. Throughout this manual, documentation is provided regarding the development of the GED® test and data collection activities, as well as evidence of reliability and validity. This…

Means of storage and automated monitoring of versions of text technical documentation

NASA Astrophysics Data System (ADS)

Leonovets, S. A.; Shukalov, A. V.; Zharinov, I. O.

2018-03-01

The paper presents automation of the process of preparation, storage and monitoring of version control of a text designer, and program documentation by means of the specialized software is considered. Automation of preparation of documentation is based on processing of the engineering data which are contained in the specifications and technical documentation or in the specification. Data handling assumes existence of strictly structured electronic documents prepared in widespread formats according to templates on the basis of industry standards and generation by an automated method of the program or designer text document. Further life cycle of the document and engineering data entering it are controlled. At each stage of life cycle, archive data storage is carried out. Studies of high-speed performance of use of different widespread document formats in case of automated monitoring and storage are given. The new developed software and the work benches available to the developer of the instrumental equipment are described.

Technical Manual for the Conceptual Learning and Development Assessment Series II: Equilateral Triangle. Technical Report No. 434. Reprinted December 1977.

ERIC Educational Resources Information Center

DiLuzio, Geneva J.; And Others

This document accompanies the Conceptual Learning and Development Assessment Series I: Equilateral Triangle, a test constructed to chart the conceptual developemnt of individuals. As a technical manual, it contains information on the rationale, development, standardization, and reliability of the test, as well as essential information and…

10 CFR 830.205 - Technical safety requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... must: (1) Develop technical safety requirements that are derived from the documented safety analysis... 10 Energy 4 2010-01-01 2010-01-01 false Technical safety requirements. 830.205 Section 830.205 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.205 Technical...

10 CFR 830.205 - Technical safety requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... must: (1) Develop technical safety requirements that are derived from the documented safety analysis... 10 Energy 4 2011-01-01 2011-01-01 false Technical safety requirements. 830.205 Section 830.205 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.205 Technical...

Transit safety retrofit package development : applications requirements document.

DOT National Transportation Integrated Search

2014-05-01

This Application Requirements Document for the Transit Safety Retrofit Package (TRP) Development captures the system, hardware and software requirements towards fulfilling the technical objectives stated within the contract. To achieve the objective ...

Repository-based software engineering program: Concept document

NASA Technical Reports Server (NTRS)

1992-01-01

This document provides the context for Repository-Based Software Engineering's (RBSE's) evolving functional and operational product requirements, and it is the parent document for development of detailed technical and management plans. When furnished, requirements documents will serve as the governing RBSE product specification. The RBSE Program Management Plan will define resources, schedules, and technical and organizational approaches to fulfilling the goals and objectives of this concept. The purpose of this document is to provide a concise overview of RBSE, describe the rationale for the RBSE Program, and define a clear, common vision for RBSE team members and customers. The document also provides the foundation for developing RBSE user and system requirements and a corresponding Program Management Plan. The concept is used to express the program mission to RBSE users and managers and to provide an exhibit for community review.

RE: Request for Correction, Technical Support Document, Greenhouse Gas Emissions Reporting from the Petroleum and Natural Gas Industry

EPA Pesticide Factsheets

The Industrial Energy Consumers of America (IECA) joins the U.S. Chamber of Commerce in its request for correction of information developed by the Environmental Protection Agency (EPA) in a background technical support document titled Greenhouse Gas Emissions Reporting from the Petroleum and Natural Gas Industry

Swedish-Portuguese Cooperation in the Field of Scientific and Technical Information and Documentation.

ERIC Educational Resources Information Center

Hjerppe, Roland

Discussions between Portugal and Sweden regarding cooperation in the field of education have been going on since 1975. This report outlines short term and long range goals, conditions, and proposals of the Swedish mission to Portugal to implement modern information and documentation services in scientific and technical research and development.…

Practical Development of a High School Technical Theatre Course.

ERIC Educational Resources Information Center

Fetzer, Ronald C.

This document presents a week-by-week syllabus for an 18-week high school technical theatre course. This course, which may be expanded to one year or reduced to nine weeks, emphasizes having the student learn by doing, so that the teacher eventually becomes freer to concentrate on play-directing responsibilities. The document also discusses the…

Planning, Conducting, and Documenting Data Analysis for Program Improvement

ERIC Educational Resources Information Center

Winer, Abby; Taylor, Cornelia; Derrington, Taletha; Lucas, Anne

2015-01-01

This 2015 document was developed to help technical assistance (TA) providers and state staff define and limit the scope of data analysis for program improvement efforts, including the State Systemic Improvement Plan (SSIP); develop a plan for data analysis; document alternative hypotheses and additional analyses as they are generated; and…

78 FR 52776 - Documents to Support Submission of an Electronic Common Technical Document; Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-26

... obtain the documents at either http://www.fda.gov/Drugs/DevelopmentApprovalProcess/FormsSubmission...BloodVaccines/GuidanceComplianceRegulatoryInformation/Guidances/default.htm . Dated: August 20, 2013...

78 FR 10181 - Documents To Support Submission of an Electronic Common Technical Document; Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-13

... obtain the documents at either http://www.fda.gov/Drugs/DevelopmentApprovalProcess/FormsSubmission...BloodVaccines/GuidanceComplianceRegulatoryInformation/Guidances/default.htm . Dated: February 8, 2013...

Project Plan: The MEDARP Documentation Unit to the School Improvement and Local School Development Projects.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Office of Educational Evaluation.

The Metropolitan Educational Development and Research Project (MEDARP) Documentation Unit, located in the Office of Educational Evaluation (OEE) at the New York City Board of Education, is funded by the Ford Foundation to document, evaluate and provide technical assistance to the School Improvement and Local School Development Projects; these are…

TFaNS Tone Fan Noise Design/Prediction System. Volume 1; System Description, CUP3D Technical Documentation and Manual for Code Developers

NASA Technical Reports Server (NTRS)

Topol, David A.

1999-01-01

TFaNS is the Tone Fan Noise Design/Prediction System developed by Pratt & Whitney under contract to NASA Lewis (presently NASA Glenn). The purpose of this system is to predict tone noise emanating from a fan stage including the effects of reflection and transmission by the rotor and stator and by the duct inlet and nozzle. These effects have been added to an existing annular duct/isolated stator noise prediction capability. TFaNS consists of: The codes that compute the acoustic properties (reflection and transmission coefficients) of the various elements and write them to files. Cup3D: Fan Noise Coupling Code that reads these files, solves the coupling problem, and outputs the desired noise predictions. AWAKEN: CFD/Measured Wake Postprocessor which reformats CFD wake predictions and/or measured wake data so it can be used by the system. This volume of the report provides technical background for TFaNS including the organization of the system and CUP3D technical documentation. This document also provides information for code developers who must write Acoustic Property Files in the CUP3D format. This report is divided into three volumes: Volume I: System Description, CUP3D Technical Documentation, and Manual for Code Developers; Volume II: User's Manual, TFaNS Vers. 1.4; Volume III: Evaluation of System Codes.

Groundwater technical procedures of the U.S. Geological Survey

USGS Publications Warehouse

Cunningham, William L.; Schalk, Charles W.

2011-01-01

A series of groundwater technical procedures documents (GWPDs) has been released by the U.S. Geological Survey, Water-Resources Discipline, for general use by the public. These technical procedures were written in response to the need for standardized technical procedures of many aspects of groundwater science, including site and measuring-point establishment, measurement of water levels, and measurement of well discharge. The techniques are described in the GWPDs in concise language and are accompanied by necessary figures and tables derived from cited manuals, reports, and other documents. Because a goal of this series of procedures is to remain current with the state of the science, and because procedures change over time, this report is released in an online format only. As new procedures are developed and released, they will be linked to this document.

Workplace Health and Safety across the Vocational/Technical Curriculum.

ERIC Educational Resources Information Center

Ryan, Thomas; Hinkley, Carl

This document contains the outcomes of a pilot project to develop materials and methods of integrating occupational health and safety into the curriculum of the technologies at a technical college. Section I is a model of how to integrate health and safety into a vocational-technical curriculum. Based on the Outcomes-Based Guidelines developed by…

78 FR 22554 - Document to Support Submission of an Electronic Common Technical Document-Specifications for File...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-16

... documents at either http://www.fda.gov/Drugs/DevelopmentApprovalProcess/FormsSubmissionRequirements...Vaccines/GuidanceComplianceRegulatoryInformation/Guidances/default.htm . Dated: April 10, 2013. Leslie Kux...

Technical Support Document: Development of the Advanced Energy Design Guide for K-12 Schools--30% Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pless, S.; Torcellini, P.; Long, N.

2007-09-01

This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for K-12 School Buildings (K-12 AEDG), a design guidance document intended to provide recommendations for achieving 30% energy savings in K-12 Schools over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The 30% energy savings target is the first step toward achieving net-zero energy schools; schools that, on an annual basis, draw from outside sources less or equal energy than they generate on site from renewable energy sources.

Proceedings of the International Symposium on Technical and Vocational Education (Beijing, China, September 13-18, 1993).

ERIC Educational Resources Information Center

Chinese National Commission for UNESCO (China).

This document contains 28 papers: "Technical and Vocational Education in Asia and the Pacific: Regional Overview and Recent Innovations" (Muhammad Ashraf Qureshi); "Secondary Education in Austria" (Helmut Aigner); "The Development of Technical Curricula in Austria" (Helmut Aigner); "Technical and Vocational Education in Australia. Australian…

TOPEX Software Document Series. Volume 5; Rev. 1; TOPEX GDR Processing

NASA Technical Reports Server (NTRS)

Lee, Jeffrey; Lockwood, Dennis; Hancock, David W., III

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Geophysical Data Record (GDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Annual Review of Database Developments: 1993.

ERIC Educational Resources Information Center

Basch, Reva

1993-01-01

Reviews developments in the database industry for 1993. Topics addressed include scientific and technical information; environmental issues; social sciences; legal information; business and marketing; news services; documentation; databases and document delivery; electronic bulletin boards and the Internet; and information industry organizational…

TOPEX SDR Processing, October 1998. Volume 4

NASA Technical Reports Server (NTRS)

Lee, Jeffrey E.; Lockwood, Dennis W.

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Sensor Data Record (SDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Technical Support Document for Version 3.9.0 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2011-09-01

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC are no longer included, but those sections remain in this document for reference purposes.« less

Technical Support Document for Version 3.9.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2012-09-01

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC and version 3.9.0 support for 2000 and 2001 IECC are no longer included, but those sections remain in this document for reference purposes.« less

Integrating Quality Concepts into TAFE Courses.

ERIC Educational Resources Information Center

Hayton, Geoff; And Others

This document contains the written outcomes from a 1988 project designed to result in the development and integration of instruction on quality into existing Australia's technical and further education (TAFE) courses. The document is intended for TAFE senior staff, staff developers, teaching staff, and curriculum developers; and senior management…

FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

KRIPPS, L.J.

2005-02-18

This document describes the qualitative evaluation of frequency and consequences for double shell tank (DST) and single shell tank (SST) representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant SSCs and/or TSRS were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support of the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the needmore » for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.« less

Middlesex Community College Software Technical Writing Program.

ERIC Educational Resources Information Center

Middlesex Community Coll., Bedford, MA.

This document describes the Software Technical Writing Program at Middlesex Community College (Massachusetts). The program is a "hands-on" course designed to develop job-related skills in three major areas: technical writing, software, and professional skills. The program was originally designed in cooperation with the Massachusetts High…

WFF TOPEX Software Documentation Altimeter Instrument File (AIF) Processing, October 1998. Volume 3

NASA Technical Reports Server (NTRS)

Lee, Jeffrey; Lockwood, Dennis

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Sensor Data Record (SDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Technical Support Document for Version 3.4.0 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2007-09-14

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.« less

Conduct of a Survey to Determine Why Blacks Do Not Have Sufficient Enrollment in Vocational-Technical Programs in Community Colleges, Area Vocational-Technical Centers and Secondary Schools, and Development of Strategies for Increasing the Number of Students Enrolling in Vocational-Technical Programs.

ERIC Educational Resources Information Center

West Virginia Research Coordinating Unit for Vocational Education, Huntington.

A project involving literature and demographic data reviews, survey development, survey administration, data analysis, and document preparation was conducted in West Virginia to determine why blacks do not have sufficient enrollments in vocational technical centers and secondary schools. Three separate multiple-choice questionnaires were developed…

Helios: Understanding Solar Evolution Through Text Analytics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Randazzese, Lucien

This proof-of-concept project focused on developing, testing, and validating a range of bibliometric, text analytic, and machine-learning based methods to explore the evolution of three photovoltaic (PV) technologies: Cadmium Telluride (CdTe), Dye-Sensitized solar cells (DSSC), and Multi-junction solar cells. The analytical approach to the work was inspired by previous work by the same team to measure and predict the scientific prominence of terms and entities within specific research domains. The goal was to create tools that could assist domain-knowledgeable analysts in investigating the history and path of technological developments in general, with a focus on analyzing step-function changes in performance,more » or “breakthroughs,” in particular. The text-analytics platform developed during this project was dubbed Helios. The project relied on computational methods for analyzing large corpora of technical documents. For this project we ingested technical documents from the following sources into Helios: Thomson Scientific Web of Science (papers), the U.S. Patent & Trademark Office (patents), the U.S. Department of Energy (technical documents), the U.S. National Science Foundation (project funding summaries), and a hand curated set of full-text documents from Thomson Scientific and other sources.« less

INDOT Technical Training Plan

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations : for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and E...

Technical Manual: 2002 Series GED Tests

ERIC Educational Resources Information Center

Ezzelle, Carol; Setzer, J. Carl

2009-01-01

This manual was written to provide technical information regarding the 2002 Series GED (General Educational Development) Tests. Throughout this manual, documentation is provided regarding the development of the GED Tests, data collection activities, as well as reliability and validity evidence. The purpose of this manual is to provide evidence…

V-TECS Career Cluster Frameworks.

ERIC Educational Resources Information Center

Vocational Technical Education Consortium of States, Decatur, GA.

This document includes 16 vocational-technical crosswalk wheels relating the 14 Vocational Technical Education Consortium of States (V-TECS) Career Families to the 16 Career Clusters developed by the U.S. Department of Education. The career clusters are based on the common academic, workplace, and technical knowledge and skills that cut across all…

An Overview of Clarkson's Technical Communications Program.

ERIC Educational Resources Information Center

Barkman, Patricia R.

The technical communications program at Clarkson College (New York) offers students 23 courses in subjects ranging from interpersonal behavior to engineering and scientific report writing to computer documentation and the development of technical manuals. With the help of an advisor, each student works out a course of study appropriate to his or…

Rating Training Continuum: Development Procedures

DTIC Science & Technology

1992-01-01

During the workshop, the SMEs will need to review technical documents to refresh their memory and resolve any technical issues. It is important that a...endorsement. 7 additional memory space was very useful. The computers with the 80-megabyte hard disk drive were used to collect all final PPPs and TLAs...description, general, and documentation). If you reed to refresh your memory , refer to Figure 3-5 for the definitions associated with the indirectly

Using Inspections to Improve the Quality of Product Documentation and Code.

ERIC Educational Resources Information Center

Zuchero, John

1995-01-01

Describes how, by adapting software inspections to assess documentation and code, technical writers can collaborate with development personnel, editors, and customers to dramatically improve both the quality of documentation and the very process of inspecting that documentation. Notes that the five steps involved in the inspection process are:…

INDOT Technical Training Plan : Appendix B

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix M

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix P

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix F

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix H

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix E

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix O

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix J

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix L

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix A

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix D

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix K

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix G

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix I

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix N

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

INDOT Technical Training Plan : Appendix C

DOT National Transportation Integrated Search

2012-04-01

The study provides the background documents necessary for the development of a Technical Training Plan and makes recommendations for the content and structure of such a plan for the District Operations, Operations, Capital Program Management, and Eng...

Naucno-tehnicka kultura i proizvodno-tehnicko stavaralastvo u Jugoslaviji (Scientific and Technical Culture and Productive Technical Creativity in Yugoslavia).

ERIC Educational Resources Information Center

Federation of Yugoslav Organizations for Technical Culture, Belgrade.

This document is an English-language abstract (approximately 1,500 words) of a book prepared by the Federation of Yugoslavia Organizations for Technical Culture ("Narodna Tehnika"). In this book, an attempt is made to (1) establish the current trends in the development of scientific and technical culture and productive technical…

Government Documents Departmental Operations Guide.

ERIC Educational Resources Information Center

Wilson, John S.; And Others

This manual for the operation and maintenance of the Government Documents Department at Baylor University's Moody Memorial Library is divided into 13 topical sections. The guide opens with the collection development policy statement, which covers the general collection, the maps division, and weeding government documents. Technical processing…

Curriculum Development System for Navy Technical Training.

ERIC Educational Resources Information Center

Butler, Lucius

Documentation for the U.S. Navy's curriculum development system is brought together in this paper, beginning with a description of the Naval Technical Training System. This description includes the Navy Training Plan (NTP) process, which is the current mechanism for introducing new courses; the organization and administration of the system; the…

CAI Programs and Macros for Formative Curriculum Evaluation.

ERIC Educational Resources Information Center

Dasenbrock, David; Teates, Thomas

This technical memo is designed for persons who are interested in research with and development of curriculum material. Detailed information regarding computer programs, and program documentation used in the development and evaluation of ISCS curriculum materials is provided. The memo includes supplemental information to ISCS Technical Report I…

Site systems engineering fiscal year 1999 multi-year work plan (MYWP) update for WBS 1.8.2.2

DOE Office of Scientific and Technical Information (OSTI.GOV)

GRYGIEL, M.L.

1998-10-08

Manage the Site Systems Engineering process to provide a traceable integrated requirements-driven, and technically defensible baseline. Through the Site Integration Group(SIG), Systems Engineering ensures integration of technical activities across all site projects. Systems Engineering's primary interfaces are with the RL Project Managers, the Project Direction Office and with the Project Major Subcontractors, as well as with the Site Planning organization. Systems Implementation: (1) Develops, maintains, and controls the site integrated technical baseline, ensures the Systems Engineering interfaces between projects are documented, and maintain the Site Environmental Management Specification. (2) Develops and uses dynamic simulation models for verification of the baselinemore » and analysis of alternatives. (3) Performs and documents fictional and requirements analyses. (4) Works with projects, technology management, and the SIG to identify and resolve technical issues. (5) Supports technical baseline information for the planning and budgeting of the Accelerated Cleanup Plan, Multi-Year Work Plans, Project Baseline Summaries as well as performance measure reporting. (6) Works with projects to ensure the quality of data in the technical baseline. (7) Develops, maintains and implements the site configuration management system.« less

NASA Software Documentation Standard

NASA Technical Reports Server (NTRS)

1991-01-01

The NASA Software Documentation Standard (hereinafter referred to as "Standard") is designed to support the documentation of all software developed for NASA; its goal is to provide a framework and model for recording the essential information needed throughout the development life cycle and maintenance of a software system. The NASA Software Documentation Standard can be applied to the documentation of all NASA software. The Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. The basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

FacetGist: Collective Extraction of Document Facets in Large Technical Corpora.

PubMed

Siddiqui, Tarique; Ren, Xiang; Parameswaran, Aditya; Han, Jiawei

2016-10-01

Given the large volume of technical documents available, it is crucial to automatically organize and categorize these documents to be able to understand and extract value from them. Towards this end, we introduce a new research problem called Facet Extraction. Given a collection of technical documents, the goal of Facet Extraction is to automatically label each document with a set of concepts for the key facets ( e.g. , application, technique, evaluation metrics, and dataset) that people may be interested in. Facet Extraction has numerous applications, including document summarization, literature search, patent search and business intelligence. The major challenge in performing Facet Extraction arises from multiple sources: concept extraction, concept to facet matching, and facet disambiguation. To tackle these challenges, we develop FacetGist, a framework for facet extraction. Facet Extraction involves constructing a graph-based heterogeneous network to capture information available across multiple local sentence-level features, as well as global context features. We then formulate a joint optimization problem, and propose an efficient algorithm for graph-based label propagation to estimate the facet of each concept mention. Experimental results on technical corpora from two domains demonstrate that Facet Extraction can lead to an improvement of over 25% in both precision and recall over competing schemes.

FacetGist: Collective Extraction of Document Facets in Large Technical Corpora

PubMed Central

Siddiqui, Tarique; Ren, Xiang; Parameswaran, Aditya; Han, Jiawei

2017-01-01

Given the large volume of technical documents available, it is crucial to automatically organize and categorize these documents to be able to understand and extract value from them. Towards this end, we introduce a new research problem called Facet Extraction. Given a collection of technical documents, the goal of Facet Extraction is to automatically label each document with a set of concepts for the key facets (e.g., application, technique, evaluation metrics, and dataset) that people may be interested in. Facet Extraction has numerous applications, including document summarization, literature search, patent search and business intelligence. The major challenge in performing Facet Extraction arises from multiple sources: concept extraction, concept to facet matching, and facet disambiguation. To tackle these challenges, we develop FacetGist, a framework for facet extraction. Facet Extraction involves constructing a graph-based heterogeneous network to capture information available across multiple local sentence-level features, as well as global context features. We then formulate a joint optimization problem, and propose an efficient algorithm for graph-based label propagation to estimate the facet of each concept mention. Experimental results on technical corpora from two domains demonstrate that Facet Extraction can lead to an improvement of over 25% in both precision and recall over competing schemes. PMID:28210517

Development document for final best conventional technology effluent limitations guidelines for the pharmaceutical manufacturing point source category. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Farrell, T.; Hund, F.

1986-12-01

The document presents the technical rationale for best conventional technology (BCI) effluent limitations guidelines for the pharmaceutical manufacturing point-source category as required by the Clean Water Act of 1977 (P.L. 95-217, the Act). The document describes the technologies considered as the bases for BCT limitations. Section II of this document summarizes the rulemaking process. Sections III through V describe the technical data and engineering analyses used to develop the regulatory technology options. The costs and removals associated with each technology option for each plant and the application of the BCT cost test methodology are presented in Section VI. BCI limitationsmore » bases on the best conventional pollutant control technology are to be achieved by existing direct-discharging facilities.« less

National Strategies for Developing Human Resources through Technical and Vocational Education and Training. The 2001 KRIVET International Conference on Technical and Vocational Education and Training [Proceedings] (Seoul, South Korea, November 21-23, 2001).

ERIC Educational Resources Information Center

Korea Research Inst. for Vocational Education and Training, Seoul.

This document contains 19 papers and case studies, in English and Korean, from a conference on national strategies for developing human resources through technical and vocational education and training. The following are representative: "The Need to Innovate and Optimize Resources [Keynote]" (Wataru Iwamoto); "School to Work…

The Development of the easyCBM CCSS Reading Assessments: Grade 3. Technical Report #1221

ERIC Educational Resources Information Center

Alonzo, Julie; Park, Bitnara Jasmine; Tindal, Gerald

2012-01-01

In this technical report, we document the development and piloting of easyCBM reading measures aligned to the Common Core State Standards, designed for use in screening students at risk for reading difficulty and monitoring their progress as they develop reading skills. The measures, which assess students' ability to respond to…

Trends in liability affecting technical writers

NASA Technical Reports Server (NTRS)

Driskill, L. P.

1981-01-01

Liability of technical writers for defective products is explored. Documents generated during a product's life cycle (including design memos, design tests, clinical trials, trial use reports, letters, and proposals) become relevant because they are likely to become the only available means of showing that the product was not defectively designed. These documents become the evidence that the product underwent balanced and well considered planning, development, testing, quality control, and field testing. The predicted increased involvement of technical writers in the prevention and defense of product liability claims is cited in view of a greater number of cases turning on "failure to warn".

Standardization Documents

DTIC Science & Technology

2011-08-01

Specifications and Standards; Guide Specifications; CIDs; and NGSs . Learn. Perform. Succeed. STANDARDIZATION DOCUMENTS Federal Specifications Commercial...national or international standardization document developed by a private sector association, organization, or technical society that plans ...Maintain lessons learned • Examples: Guidance for application of a technology; Lists of options Learn. Perform. Succeed. DEFENSE HANDBOOK

NASA Docking System (NDS) Users Guide: International Space Station Program. Type 4

NASA Technical Reports Server (NTRS)

Tabakman, Alexander

2010-01-01

The NASA Docking System (NDS) Users Guide provides an overview of the basic information needed to integrate the NDS onto a Host Vehicle (HV). This Users Guide is intended to provide a vehicle developer with a fundamental understanding of the NDS technical and operations information to support their program and engineering integration planning. The Users Guide identifies the NDS Specification, Interface Definition or Requirement Documents that contain the complete technical details and requirements that a vehicle developer must use to design, develop and verify their systems will interface with NDS. This Guide is an initial reference and must not be used as a design document. In the event of conflict between this Users Guide and other applicable interface definition or requirements documents; the applicable document will take precedence. This Users Guide is organized in three main sections. Chapter 1 provides an overview of the NDS and CDA hardware and the operations concepts for the NDS. Chapter 2 provides information for Host Vehicle Program integration with the NDS Project Office. Chapter 2 describes the NDS Project organization, integration and verification processes, user responsibilities, and specification and interface requirement documents. Chapter 3 provides a summary of basic technical information for the NDS design. Chapter 3 includes NDS hardware component descriptions, physical size and weight characteristics, and summary of the capabilities and constraints for the various NDS sub-systems.

Feasibility of Developing a Protocol for Automated Protist Analysis

DTIC Science & Technology

2010-03-01

Acquisition Directorate Research & Development Center Report No: CG-D-02-ll Feasibility of Developing a Protocol for Automated Protist Analysis...Technical Information Service, Springfield, VA 22161. March 2010 Homeland Security Feasibility of Developing a Protocol for Automated Protist ...March 21)10 Feasibility of Developing a Protocol for Automated Protist Analysis 00 00 o CM Technical Report Documentation Page 1. Report No CG-D

77 FR 38509 - Approval and Promulgation of Implementation Plans; South Carolina; Regional Haze State...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-28

... Carolina's 2018 projections are based on the State's technical analysis of the anticipated emissions rates... haze technical analyses was developed by the Visibility Improvement State and Tribal Association of the... appropriate documentation in its SIP of the technical analysis it used to assess the need for and...

Rethinking Technical Communication Pedagogy: A Poststructuralist View of Program and Course Design.

ERIC Educational Resources Information Center

Woolever, Kristin R.

Technical communication specialists today really have to be technology experts as well as effective writers--even their titles have changed to "information designers, information engineers, or document developers." Teachers of technical communication should be up to date in the classroom to meet the changing needs of the workplace.…

78 FR 34392 - Guidance for Industry and Food and Drug Administration Staff: Technical Considerations for Pen...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-07

...] Guidance for Industry and Food and Drug Administration Staff: Technical Considerations for Pen, Jet, and... availability of a final guidance document entitled ``Technical Considerations for Pen, Jet, and Related... developing information to support a marketing application for a pen, jet, or related injector device intended...

TADS and Technical Assistance: Readings on System Design, Needs Assessment, Consultation, and Evaluation.

ERIC Educational Resources Information Center

Trohanis, Pascal L., Ed.

The document reviews the technical assistance process used by TADS (Technical Assistance Development System), a project to provide support to HCEEP (Handicapped Children's Early Education Program) demonstration projects serving young handicapped children and their families. Chapter 1, by P. Trohanis, focuses on a number of questions that people…

GEOSAT Follow-On (GFO) Altimeter Document Series. Volume 5; Version 1; GFO Radar Altimeter Processing at Wallops Flight Facility

NASA Technical Reports Server (NTRS)

Lockwood, Dennis W.; Conger, A. M.

2003-01-01

This document is a compendium of the WFF GFO Software Development Team's knowledge regarding of GDO CAL/VAL Data. It includes many elements of a requirements document, a software specification document, a software design document, and a user's guide. In the more technical sections, this document assumes the reader is familiar with GFO and its CAL/VAL Data.

Compiling the space shuttle wind tunnel data base: An exercise in technical and managerial innovators

NASA Technical Reports Server (NTRS)

Kemp, N. D.

1983-01-01

Engineers evaluating Space Shuttle flight data and performance results are using a massive data base of wind tunnel test data. A wind tunnel test data base of the magnitude attained is a major accomplishment. The Apollo program spawned an automated wind tunnel data analysis system called SADSAC developed by the Chrysler Space Division. An improved version of this system renamed DATAMAN was used by Chrysler to document analyzed wind tunnel data and data bank the test data in standardized formats. These analysis documents, associated computer graphics and standard formatted data were disseminated nationwide to the Shuttle technical community. These outputs became the basis for substantiating and certifying the flight worthiness of the Space Shuttle and for improving future designs. As an aid to future programs this paper documents the lessons learned in compiling the massive wind tunnel test data base for developing the Space Shuttle. In particular, innovative managerial and technical concepts evolved in the course of conceiving and developing this successful DATAMAN system and the methods and organization for applying the system are presented.

Using electronic document management systems to manage highway project files.

DOT National Transportation Integrated Search

2011-12-12

"WisDOTs Bureau of Technical Services is interested in learning about the practices of other state departments of : transportation in developing and implementing an electronic document management system to manage highway : project files"

Transit safety retrofit package development : architecture and design specifications.

DOT National Transportation Integrated Search

2014-05-01

The Architecture and Design Specifications capture the TRP system architecture and design that fulfills the technical objectives stated in the TRP requirements document. The document begins with an architectural overview that identifies and describes...

76 FR 66311 - Draft Documents To Support Submission of an Electronic Common Technical Document; Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-26

.../DevelopmentApprovalProcess/FormsSubmissionRequirements/ElectronicSubmissions/ucm253101.htm , http://www.fda.gov/BiologicsBloodVaccines/GuidanceComplianceRegulatoryInformation/Guidances/default.htm , or http...

Alternatives for Developing User Documentation for Applications Software

DTIC Science & Technology

1991-09-01

style that is designed to match adult reading behaviors, using reader-based writing techniques, developing effective graphics , creating reference aids...involves research, analysis, design , and testing. The writer must have a solid understanding of the technical aspects of the document being prepared, good...ABSTRACT The preparation of software documentation is an iterative process that involves research, analysis, design , and testing. The writer must have

78 FR 70586 - Technical Support Document: Technical Update of the Social Cost of Carbon for Regulatory Impact...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-26

... OFFICE OF MANAGEMENT AND BUDGET Technical Support Document: Technical Update of the Social Cost of... Budget, Executive Office of the President. ACTION: Notice of availability and request for comments. SUMMARY: The Office of Management and Budget (OMB) requests comments on the Technical Support Document...

An Innovative Marketing Model: Promoting Technical Programs by Conducting One-Day Conferences.

ERIC Educational Resources Information Center

Petrosian, Anahid

This document examines an innovative marketing strategy developed by South Texas Community College (STCC) to promote its technical programs. In 2000, STCC organized the "Business Conference Institute" to develop 1-day conferences with the Division of Business, Math & Sciences (DBMS). The creation of this Institute linked the College with the local…

Solution-Space Screening of a Hypersonic Endurance Demonstrator

NASA Technical Reports Server (NTRS)

Chudoba, Bernd; Coleman, Gary; Oza, Amit; Gonzalez, Lex; Czysz, Paul

2012-01-01

This report documents a parametric sizing study performed to develop a program strategy for research and development and procurement of a feasible next-generation hypersonic air-breathing endurance demonstrator. Overall project focus has been on complementing technical and managerial decision-making during the earliest conceptual design phase towards minimization of operational, technical, and managerial risks.

Technical Support Document: The Development of the Advanced Energy Design Guide for Highway Lodging Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Wei; Jarnagin, Ronald E.; Gowri, Krishnan

2008-09-30

This Technical Support Document (TSD) describes the process and methodology for development of the Advanced Energy Design Guide for Highway Lodgings (AEDG-HL or the Guide), a design guidance document intended to provide recommendations for achieving 30% energy savings in highway lodging properties over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The AEDG-HL is the fifth in a series of guides being developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA),more » the United States Green Buildings Council (USGBC), and the U.S. Department of Energy (DOE).« less

[Standardization of hospital feeding].

PubMed

Caracuel García, Ángel Manuel

2015-05-07

Normalization can be understood as the establishing measures against repetitive situations through the development, dissemination, and application of technical design documents called standards. In Andalusia there are 45 public hospitals with 14,606 beds, and in which 11,700 full pensions / day are served. The Working Group on Hospital Food Standardization of the Andalusian Society for Clinical Nutrition and Dietetics, started in 2010, working on the certification of suppliers, product specifications, and meals technical card. - Develop a specific tool to help improving food safety through the certification of their suppliers. - Develop a standardized technical specifications of foodstuffs necessary for the development of menus established codes diets Andalusian hospitals document. - Develop a catalog of data sheets plates of hospital meals, to homogenize menus, respecting local and unifying criteria for qualitative and quantitative ingredients. - Providing documentation and studying of several public hospitals in Andalusia: • Product specifications and certification of suppliers. • International standards certification and distribution companies. • Legislation. • Data sheets for the menu items. • Specifications of different product procurement procedures. - Development of the draft standard HOSPIFOOD®, and approval of the version “0.0”. - Training course for auditors to this standard. - Development of a raw materials catalog as technical cards. - Meals Technical cards review and election of the ones which will be part of the document. After nearly three years of work, we have achieved the following products: - Standardized database of technical specifications for the production of food dietary codes for: fish, seafood, meat and meat products, meats and pates, ready meals, bread and pastries, preserves, milk and dairy products, oils, cereals, legumes , vegetables, fruits, fresh and frozen vegetables, condiments and spices. - Standardized database of technical cards for meals containing the following data: SAS Code, Province, Hospital, name plate, ingredients (g), edible ingredients (g) kcal, Proteins, HC, Fat and Fiber. - HOSPIFOOD® standard certification for food providers in hospitals, school cafeterias and other institutions of social restoration. Patients expect food that is offered during the stay in the hospital, meet basic standards of quality and safety, and therefore it is necessary to design and develop control systems from the award and / or acquisition of food (raw materials and finished) products which subsequently become part of the menu that is offered as part of their treatment. To avoid the effect of fraudulent practice in public health, it’s needed to ensure the quality and safety of the food from the origin and establish the standards for acquisition and subsequent use of it.

DEVELOPMENT OF A FISH INDEX OF BIOTIC INTEGRITY TO ASSESS THE CONDITION OF WEST VIRGINIA STREAMS: TECHNICAL SUPPORT DOCUMENT

EPA Science Inventory

This report documents the development of a fish index of biotic integrity (IBI) for wadeable streams in West Virginia and to determine the applicability of the IBI in streams with different thermal regimes. The IBI will be developed using fish data collected at EMAP sites from 1...

Certificate management entities for a connected vehicle environment : public workshop read-ahead document.

DOT National Transportation Integrated Search

2012-04-06

This document presents an overview of work conducted to date around development and analysis of organizational and operational models for certificate management in the connected vehicle environment. Functions, organizational models, technical backgro...

The element of naturalness when evaluating image quality of digital photo documentation after sexual assault.

PubMed

Ernst, E J; Speck, P M; Fitzpatrick, J J

2012-01-01

Digital photography is a valuable adjunct to document physical injuries after sexual assault. In order for a digital photograph to have high image quality, there must exist a high level of naturalness. Digital photo documentation has varying degrees of naturalness; however, for a photograph to be natural, specific technical elements for the viewer must be satisfied. No tool was available to rate the naturalness of digital photo documentation of female genital injuries after sexual assault. The Photo Documentation Image Quality Scoring System (PDIQSS) tool was developed to rate technical elements for naturalness. Using this tool, experts evaluated randomly selected digital photographs of female genital injuries captured following sexual assault. Naturalness of female genital injuries following sexual assault was demonstrated when measured in all dimensions.

National Profiles in Technical and Vocational Education in Asia and the Pacific: Japan.

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

One of a series of studies on the development of technical and vocational education in the member states of UNESCO, this report profiles the educational system in Japan. The three parts of the document provide information about the geography and history of Japan, historical and current perspectives of general education, and technical and…

National Profiles in Technical and Vocational Education in Asia and the Pacific: Nepal.

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

One of a series of studies on the development of technical and vocational education in the member states of UNESCO, this report profiles the educational system in Nepal. The four parts of the document provide general information about the following: the country; the history, goals, and structure of the educational system; vocational technical and…

Technical documentation challenges in aviation maintenance : a proceedings report.

DOT National Transportation Integrated Search

2012-11-01

The 2012 Technical Documentation workshop addressed both problems and solutions associated with technical : documentation for maintenance. These issues are known to cause errors, rework, maintenance delays, other : safety hazards, and FAA administrat...

Communications data delivery system analysis : public workshop read-ahead document.

DOT National Transportation Integrated Search

2012-04-09

This document presents an overview of work conducted to date around development and analysis of communications data delivery systems for supporting transactions in the connected vehicle environment. It presents the results of technical analysis of co...

Interactive BIM-Enabled Safety Training Piloted in Construction Education

ERIC Educational Resources Information Center

Clevenger, Caroline; Lopez del Puerto, Carla; Glick, Scott

2015-01-01

This paper documents and assesses the development of a construction safety training module featuring interactive, BIM-enabled, 3D visualizations to test if such a tool can enhance safety training related to scaffolds. This research documents the technical challenges and the lessons learned through the development and administration of a prototype…

SME Acceptability Determination For DWPF Process Control (U)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwards, T.

2017-06-12

The statistical system described in this document is called the Product Composition Control System (PCCS). K. G. Brown and R. L. Postles were the originators and developers of this system as well as the authors of the first three versions of this technical basis document for PCCS. PCCS has guided acceptability decisions for the processing at the Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS) since the start of radioactive operations in 1996. The author of this revision to the document gratefully acknowledges the firm technical foundation that Brown and Postles established to support the ongoing successfulmore » operation at the DWPF. Their integration of the glass propertycomposition models, developed under the direction of C. M. Jantzen, into a coherent and robust control system, has served the DWPF well over the last 20+ years, even as new challenges, such as the introduction into the DWPF flowsheet of auxiliary streams from the Actinide Removal Process (ARP) and other processes, were met. The purpose of this revision is to provide a technical basis for modifications to PCCS required to support the introduction of waste streams from the Salt Waste Processing Facility (SWPF) into the DWPF flowsheet. An expanded glass composition region is anticipated by the introduction of waste streams from SWPF, and property-composition studies of that glass region have been conducted. Jantzen, once again, directed the development of glass property-composition models applicable for this expanded composition region. The author gratefully acknowledges the technical contributions of C.M. Jantzen leading to the development of these glass property-composition models. The integration of these models into the PCCS constraints necessary to administer future acceptability decisions for the processing at DWPF is provided by this sixth revision of this document.« less

Automotive Technologies. State Competency Profile.

ERIC Educational Resources Information Center

Ohio Board of Regents, Columbus.

This document, which lists the technical automotive technologies competencies identified by representatives from business, industry, and labor as well as technical educators throughout Ohio, is intended to assist individuals and organizations in developing college tech prep programs that will prepare students from secondary through post-secondary…

Audit of nuclear medicine scientific and technical standards.

PubMed

Jarritt, Peter H; Perkins, Alan C; Woods, Sandra D

2004-08-01

The British Nuclear Medicine Society has developed a process for the service-specific organizational audit of nuclear medicine departments. This process identified the need for a scheme suitable for the audit of the scientific and technical standards of a department providing such a service. This document has evolved following audit visits of a number of UK departments. It is intended to be used as a written document to facilitate the audit procedure and may be used for both external and self-audit purposes. Scientific and technical standards have been derived from a number of sources, including regulatory documents, notes for guidance and peer-reviewed publications. The audit scheme is presented as a series of questions with responses graded according to legal and safety obligations (A), good practice (B) and desirable aspects of service delivery (C). This document should be regarded as part of an audit framework and should be kept under review as the process evolves to meet the future demands of this high-technology-based clinical service.

National Profiles in Technical and Vocational Education in Asia and the Pacific: Philippines.

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

One of a series of studies on the development of technical and vocational education in the member states of UNESCO, this report profiles the educational system in the Philippines. The two parts of the document provide an overview and milestones in technical and vocational education (through charts and tables). Some of the highlights are as…

Environmental Education in Technical and Vocational Education. A Discussion Document for Unesco Training Seminars on the Incorporation of Environmental Education into Technical and Vocational Education. Environmental Education Series 24.

ERIC Educational Resources Information Center

Grabe, Sven

This paper is intended to serve as the basis for discussion of the scope and place of environmental education in technical and vocational education. It is addressed primarily to administrators, curriculum developers, and other active participants in the definition of scope and content of technical and vocational courses. After a brief introduction…

Preparing technical text for translation: A comparison between International English and methods for simplifying language

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buican, I.; Hriscu, V.; Amador, M.

For the past four and a half years, the International Communication Committee at Los Alamos National Laboratory has been working to develop a set of guidelines for writing technical and scientific documents in International English, that is, English for those whose native language is not English. Originally designed for documents intended for presentation in English to an international audience of technical experts, the International English guidelines apply equally well to the preparation of English text for translation. This is the second workshop in a series devoted to the topic of translation. The authors focus on the advantages of using Internationalmore » English, rather than various methods of simplifying language, to prepare scientific and technical text for translation.« less

Educational Software--New Guidelines for Development.

ERIC Educational Resources Information Center

Gold, Patricia Cohen

1984-01-01

Discusses standards developed by the Educational Computer Service of the National Education Association that incorporate technical, educational, and documentation components to guide authors in the development of quality educational software. (Author/MBR)

Monitored Natural Attenuation of Inorganic Contaminants in Ground Water – Technical Report Series

EPA Science Inventory

This presentation will cover the development and content of new EPA Technical Resource Documents on the application of monitored natural attenuation for inorganic contaminants in ground water. This presentation discusses the various mechanisms that are recognized to result in th...

Swedish-Portuguese Cooperation in the Field of Scientific and Technical Information and Documentation. Progress Report for Phase One, 1975-1978.

ERIC Educational Resources Information Center

Lopes da Silva, Gabriela; And Others

This report describes the Swedish International Development Authority's (SIDA) cooperative project in Information and Documentation (I&D), an effort to introduce modern methods for information services to research and development in Portugal. SIDA's work in the following areas is examined: (1) education in information science for Portuguese…

European Trends in the Development of Occupations and Qualifications. Volume I. CEDEFOP Reference Document.

ERIC Educational Resources Information Center

Sellin, Burkart

This document is intended to provide updated information on the most important trends in the development of occupations and qualifications in Europe in the face of current demographic, social, economic, technical, environmental, and cultural challenges. It provides a general summary of the most important trends at the macro level, and makes…

Development and Technology Transfer of the Syncro Blue Tube (Gabriel) Magnetically Guided Feeding Tube

DTIC Science & Technology

2017-06-01

other documentation. TITLE: Development and Technology Transfer of the Syncro Blue Tube (Gabriel) Magnetically Guided Feeding Tube REPORT DOCUMENTATION...TITLE AND SUBTITLE Development and Technology Transfer of the Syncro Blue Tube (Gabriel) Magnetically Guided Feeding Tube 5a. CONTRACT NUMBER W81XWH-09-2...Technical Abstract: Further Development and Technology Transfer of the Syncro BLUETUBE™ (Gabriel) Magnetically Guided Feeding Tube. New Primary

Prototype development and demonstration for response, emergency staging, communications, uniform management, and evacuation (R.E.S.C.U.M.E.) : technical report on prototype development and field testing of R.E.S.C.U.M.E. applications.

DOT National Transportation Integrated Search

2015-04-01

This document is the final project technical report for the development and field testing of the Response, Emergency Staging, Communications, Uniform Management, and Evacuation (R.E.S.C.U.M.E.) application bundle, with a focus on the Incident Zone (I...

MNA of Inorganic Contaminants: Contrasting Behavior of Base Metals and Oxyanions

EPA Science Inventory

EPA’s Office of Research and Development has recently prepared technical resource documents for the application of MNA to inorganic contaminants in groundwater. These documents present a framework and tiered approach for evaluating whether MNA presents a viable remediation opt...

Development document for proposed effluent-limitations guidelines and standards for shipbuilding and repair. Point-source category

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-12-01

The document contains a discussion of the technical rationale for effluent limitations guidelines for the Shipbuilding and Repair Point Source Category, and the control and treatment technologies which form the basis for these guidelines.

MNA of Inorganic Contaminants: Contrasting Behavior of Base Metals and Oxyanions

EPA Science Inventory

EPA’s Office of Research and Development has recently prepared technical resource documents for the application of MNA to inorganic contaminants in groundwater. These documents present a framework and tiered approach for evaluating whether MNA presents a viable remediation optio...

Alarms, Chemical

DTIC Science & Technology

cited in applicable qualitative materiel requirements, small development requirements, technical characteristics, and other requirements and documentation that pertain to automatic chemical agent alarms.

RELEASE OF DRIED RADIOACTIVE WASTE MATERIALS TECHNICAL BASIS DOCUMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

KOZLOWSKI, S.D.

2007-05-30

This technical basis document was developed to support RPP-23429, Preliminary Documented Safety Analysis for the Demonstration Bulk Vitrification System (PDSA) and RPP-23479, Preliminary Documented Safety Analysis for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Facility. The main document describes the risk binning process and the technical basis for assigning risk bins to the representative accidents involving the release of dried radioactive waste materials from the Demonstration Bulk Vitrification System (DBVS) and to the associated represented hazardous conditions. Appendices D through F provide the technical basis for assigning risk bins to the representative dried waste release accident and associated represented hazardous conditionsmore » for the Contact-Handled Transuranic Mixed (CH-TRUM) Waste Packaging Unit (WPU). The risk binning process uses an evaluation of the frequency and consequence of a given representative accident or represented hazardous condition to determine the need for safety structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls. A representative accident or a represented hazardous condition is assigned to a risk bin based on the potential radiological and toxicological consequences to the public and the collocated worker. Note that the risk binning process is not applied to facility workers because credible hazardous conditions with the potential for significant facility worker consequences are considered for safety-significant SSCs and/or TSR-level controls regardless of their estimated frequency. The controls for protection of the facility workers are described in RPP-23429 and RPP-23479. Determination of the need for safety-class SSCs was performed in accordance with DOE-STD-3009-94, Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, as described below.« less

Cycle water chemistry based on film forming amines at power plants: evaluation of technical guidance documents

NASA Astrophysics Data System (ADS)

Dyachenko, F. V.; Petrova, T. I.

2017-11-01

Efficiency and reliability of the equipment in fossil power plants as well as in combined cycle power plants depend on the corrosion processes and deposit formation in steam/water circuit. In order to decrease these processes different water chemistries are used. Today the great attention is being attracted to the application of film forming amines and film forming amine products. The International Association for the Properties of Water and Steam (IAPWS) consolidated the information from all over the World, and based on the research studies and operating experience of researchers and engineers from 21 countries, developed and authorized the Technical Guidance Document: “Application of Film Forming Amines in Fossil, Combined Cycle, and Biomass Power Plants” in 2016. This article describe Russian and International technical guidance documents for the cycle water chemistries based on film forming amines at fossil and combined cycle power plants.

Hazardous Materials Technician. Technical Committee on Occupational Curriculum Development.

ERIC Educational Resources Information Center

Northern Montana Coll., Havre. Montana Center for Vocational Education, Research, Curriculum and Personnel Development.

This document describes Montana's postsecondary curriculum to prepare hazardous materials technicians. Basic general education requirements are described. The technical skills and the knowledge associated with each are listed in the following categories: (1) site assessment; (2) sampling materials; (3) handling materials; (4) recording data; (5)…

HRD and Small Manufacturers. Symposium 42. [AHRD Conference, 2001].

ERIC Educational Resources Information Center

2001

This symposium on human resource development (HRD) and small manufacturers consists of three presentations. "Toward a Model of Technical Assistance for Small Manufacturers: The Role of Performance Technology" (Dale C. Brandenburg) reviews literature documenting the need for technical assistance to small manufacturers, especially as it…

Digitization, Integration and Preservation of Technical and Historical Information: The Case of INTA, the National Institute for Aerospace Technique of Spain

NASA Astrophysics Data System (ADS)

Merida Martín, F.; Paz Otero, S.

2007-10-01

During the last two years the INTA -- National Institute for Aerospace Technique -- library has been improving different areas related to the information management processes, such as those related to cataloguing, dissemination of technical information, centralization at the Library of all relevant documents and information applicable to scientific research within our organization, implementation of library web services, etc. As part of these processes of modernization of services that the INTA Library is carrying out, a project of digitization of both technical documentation and historical records of the Institute has been defined. The goal is to achieve the total digitization of technical documents and historical papers through the year 2006, and provide access for the resulting electronic collection to the Spanish aerospace community. For the development of the project a deep study of the state of the art in digitization and preservation matters has been conducted. That study covers the different aspects of such a project that could be experienced, such as the risk of data loss, the bandwidth needed to guarantee access to this huge quantity of electronic documentation, the fragility of the digital media, the rapid obsolescence of hardware and software, etc. Also the project is going to assume the new reality of documents that are not originating in paper format, but are digital-born, and how to integrate all the electronic documents in one system, fulfilling the same standards and using the same available technology.

NASA software documentation standard software engineering program

NASA Technical Reports Server (NTRS)

1991-01-01

The NASA Software Documentation Standard (hereinafter referred to as Standard) can be applied to the documentation of all NASA software. This Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. This basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lundergan, C. D.; Mead, P. L.

This report is a compilation of 17 individual documents that together summarize the technical capabilities of Sandia Laboratories. Each document in this compilation contains details about a specific area of capability. Examples of application of the capability to research and development problems are provided. An eighteenth document summarizes the content of the other seventeen. Each of these documents was issued with a separate report number (SAND 74-0073A through SAND 74-0091, except -0078). (RWR)

TWRS technical baseline database manager definition document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Acree, C.D.

1997-08-13

This document serves as a guide for using the TWRS Technical Baseline Database Management Systems Engineering (SE) support tool in performing SE activities for the Tank Waste Remediation System (TWRS). This document will provide a consistent interpretation of the relationships between the TWRS Technical Baseline Database Management software and the present TWRS SE practices. The Database Manager currently utilized is the RDD-1000 System manufactured by the Ascent Logic Corporation. In other documents, the term RDD-1000 may be used interchangeably with TWRS Technical Baseline Database Manager.

75 FR 13680 - Commutation of Sentence: Technical Change

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-23

... Sentence: Technical Change AGENCY: Bureau of Prisons, Justice. ACTION: Interim rule. SUMMARY: This document makes a minor technical change to the Bureau of Prisons (Bureau) regulations on sentence commutation to.... Commutation of Sentence: Technical Change This document makes a minor technical change to the Bureau...

Technical Guidance for Assessing Environmental Justice in ...

EPA Pesticide Factsheets

The Technical Guidance for Assessing Environmental Justice in Regulatory Analysis (also referred to as the Environmental Justice Technical Guidance or EJTG) is intended for use by Agency analysts, including risk assessors, economists, and other analytic staff that conduct analyses to evaluate EJ concerns in the context of regulatory actions. Senior EPA managers and decision makers also may find this document useful to understand analytic expectations and to ensure that EJ concerns are appropriately considered in the development of analyses to support regulatory actions under EPA’s action development process. Specifically, the document outlines approaches and methods to help Agency analysts evaluate EJ concerns. The document provides overarching direction to analysts by outlining a series of questions that will ensure the decision maker has appropriate information about baseline risks across population groups, and how those risks are distributed under the options being considered. In addition, the document provides a set of recommendations and requirements as well as best practices for use in analyzing and reporting results from consideration of EJ concerns. These principles will help ensure consistency, quality, and transparency across regulatory actions, while allowing for flexibility needed across different regulatory actions. The purpose of the EJTG is ensure consistency, quality, and transparency in considering environmental justice, while allowing f

Standardization of left atrial, right ventricular, and right atrial deformation imaging using two-dimensional speckle tracking echocardiography: a consensus document of the EACVI/ASE/Industry Task Force to standardize deformation imaging.

PubMed

Badano, Luigi P; Kolias, Theodore J; Muraru, Denisa; Abraham, Theodore P; Aurigemma, Gerard; Edvardsen, Thor; D'Hooge, Jan; Donal, Erwan; Fraser, Alan G; Marwick, Thomas; Mertens, Luc; Popescu, Bogdan A; Sengupta, Partho P; Lancellotti, Patrizio; Thomas, James D; Voigt, Jens-Uwe

2018-03-27

The EACVI/ASE/Industry Task Force to standardize deformation imaging prepared this consensus document to standardize definitions and techniques for using two-dimensional (2D) speckle tracking echocardiography (STE) to assess left atrial, right ventricular, and right atrial myocardial deformation. This document is intended for both the technical engineering community and the clinical community at large to provide guidance on selecting the functional parameters to measure and how to measure them using 2D STE.This document aims to represent a significant step forward in the collaboration between the scientific societies and the industry since technical specifications of the software packages designed to post-process echocardiographic datasets have been agreed and shared before their actual development. Hopefully, this will lead to more clinically oriented software packages which will be better tailored to clinical needs and will allow industry to save time and resources in their development.

Minnesota Frameworks for Career and Technical Education

ERIC Educational Resources Information Center

Minnesota Department of Education, 2004

2004-01-01

This framework provides tools for determining how national and industry standards align with goals and curriculum in Career and Technical Education (CTE) programs. The examples, alignment charts, and ideas for activities contained in this document are intended to encourage districts, sites, and teachers to use, adapt, and develop their own best…

Electronics. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; and overview of the electronics field; an list acknowledging the professionals who helped develop the competency list; and the comprehensive listing of the professional or occupational competencies deemed essential for…

Drafting. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the drafting industry; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for graduates…

Dental Assistant. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the dental assistant occupation; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for…

Nurse Assistant. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the nurse assistant occupation; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for…

State Leadership for Career Technical Education.

ERIC Educational Resources Information Center

Kister, Joanna

This document is comprised of two main parts: (1) Role and Nature of State Leadership; and (2) Developing Leaders. Issues related to state leadership for career and technical education (CTE) were studied. CTE-related research, policy, and practice were reviewed. State directors of CTE were surveyed, and 39 individuals considered opinion leaders in…

Visual Communications Art. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the visual communications art profession; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed…

TADS Final Evaluation Report, 1980-81. Appendix S.

ERIC Educational Resources Information Center

Suarez, Tanya M.; And Others

The document contains the final report of the Technical Assistance Development System (TADS), a program which provided technical assistance (TA) services to 53 Handicapped Children's Early Education Program (HCEEP) demonstration projects and 13 State Implementation Grants (SIGs). The evaluation report is divided into five sections. Section 1…

Graphic Communications. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the graphic communications field; a list acknowledging professionals who helped develop the competency list; and a comprehensive list of the professional or occupational competencies deemed essential for…

SDC DOCUMENTS APPLICABLE TO STATE AND LOCAL GOVERNMENT PROBLEMS.

DTIC Science & Technology

Public administration , Urban and regional planning, The administration of justice, Bio-medical systems, Educational systems, Computer program systems, The development and management of computer-based systems, Information retrieval, Simulation. AD numbers are provided for those documents which can be obtained from the Defense Documentation Center or the Department of Commerce’s Clearinghouse for Federal Scientific and Technical Information.

Phytotechnology Technical and Regulatory Guidance Document

DTIC Science & Technology

2001-04-01

contaminated media is rather new. Throughout the development process of this document, we referred to the science as “ phytoremediation .” Recently...the media containing contaminants, we now refer to “phytotechnologies” as the overarching terminology, while using “ phytoremediation ” more...publication of the ITRC document, Phytoremediation Decision Tree. The decision tree was designed to allow potential users to take basic information

Probabilistic oil Outflow Analysis of Alternative Tanker Designs. Addendum 1.

DTIC Science & Technology

1992-10-01

National Technical Information Service, Springfield, Virginia 22161 Prepared for: U.S. Coast Guard Research and Development Center 1082 Shennecossett...Center 1082 Shennecossett Road Groton, CT 06340-6096 ±i Technical Report Documentation Page 1. Report No. 2. Government Accession No. 3. Recipient’s...Code Research and Development Center U.S. Coast Guard 1082 Shennecossett Road Office of Engineering, Logistics, Groton, Connecticut 06340-6096 and

Center for Information Services Fourth Quarterly Progress Report, Phase IIB; Detailed Design and Prototype Development, 1 October 1971 to 31 December 1971.

ERIC Educational Resources Information Center

Kehl, W. B.; And Others

The administrative activity, including organization, staff, budget and external contacts, and the technical progress of IPS development, experimental service, workshops, documentation and related activities of the Center for Information Services (at the University of California, Los Angeles) are reported upon in this document. Pages 9 and 10 may…

Approach for Estimating Exposures and Incremental Health ...

EPA Pesticide Factsheets

Approach for Estimating Exposures and Incremental Health Effects from Lead During Renovation, Repair, and Painting Activities in Public and Commercial Buildings” (Technical Approach Document). Also available for public review and comment are two supplementary documents: the detailed appendices for the Technical Approach Document and a supplementary report entitled “Developing a Concentration-Response Function for Pb Exposure and Cardiovascular Disease-Related Mortality.” Together, these documents describes an analysis for estimating exposures and incremental health effects created by renovations of public and commercial buildings (P&CBs). This analysis could be used to identify and evaluate hazards from renovation, repair, and painting activities in P&CBs. A general overview of how this analysis can be used to inform EPA’s hazard finding is described in the Framework document that was previously made available for public comment (79 FR 31072; FRL9910-44). The analysis can be used in any proposed rulemaking to estimate the reduction in deleterious health effects that would result from any proposed regulatory requirements to mitigate exposure from P&CB renovation activities. The Technical Approach Document describes in detail how the analyses under this approach have been performed and presents the results – expected changes in blood lead levels and health effects due to lead exposure from renovation activities.

Methods and means used in programming intelligent searches of technical documents

NASA Technical Reports Server (NTRS)

Gross, David L.

1993-01-01

In order to meet the data research requirements of the Safety, Reliability & Quality Assurance activities at Kennedy Space Center (KSC), a new computer search method for technical data documents was developed. By their very nature, technical documents are partially encrypted because of the author's use of acronyms, abbreviations, and shortcut notations. This problem of computerized searching is compounded at KSC by the volume of documentation that is produced during normal Space Shuttle operations. The Centralized Document Database (CDD) is designed to solve this problem. It provides a common interface to an unlimited number of files of various sizes, with the capability to perform any diversified types and levels of data searches. The heart of the CDD is the nature and capability of its search algorithms. The most complex form of search that the program uses is with the use of a domain-specific database of acronyms, abbreviations, synonyms, and word frequency tables. This database, along with basic sentence parsing, is used to convert a request for information into a relational network. This network is used as a filter on the original document file to determine the most likely locations for the data requested. This type of search will locate information that traditional techniques, (i.e., Boolean structured key-word searching), would not find.

40 CFR Appendix A to Part 67 - Technical Support Document

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Technical Support Document A Appendix A to Part 67 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...—Technical Support Document Note: EPA will make copies of appendix A available from: Director, Stationary...

40 CFR Appendix A to Part 66 - Technical Support Document

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Technical Support Document A Appendix A to Part 66 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...—Technical Support Document Note: For text of appendix A see appendix A to part 67. ...

SELECTIVE DISSEMINATION OF INFORMATION (SDI). VOLUME I, PILOT TEST AT U.S. ARMY NATICK LABORATORIES. FINAL REPORT. ARMY TECHNICAL LIBRARY IMPROVEMENT STUDIES (ATLIS), REPORT NO. 15.

ERIC Educational Resources Information Center

BIVONA, WILLIAM A.

THIS VOLUME PRESENTS THE RESULTS OF A NINE-MONTH TEST OF A PROTOTYPE SELECTIVE DISSEMINATION OF INFORMATION (SDI) SYSTEM DEVELOPED FOR THE ARMY TECHNICAL LIBRARIES. DURING THE PILOT TEST ONE THOUSAND DOCUMENTS WERE CATALOGED, INDEXED, AND DISSEMINATED TO TWENTY-FIVE SCIENTIFIC AND TECHNICAL PERSONNEL. MATCHING OF THE INTEREST PROFILES OF THESE…

The TMIS life-cycle process document, revision A

NASA Technical Reports Server (NTRS)

1991-01-01

The Technical and Management Information System (TMIS) Life-Cycle Process Document describes the processes that shall be followed in the definition, design, development, test, deployment, and operation of all TMIS products and data base applications. This document is a roll out of TMIS Standards Document (SSP 30546). The purpose of this document is to define the life cycle methodology that the developers of all products and data base applications and any subsequent modifications shall follow. Included in this methodology are descriptions of the tasks, deliverables, reviews, and approvals that are required before a product or data base application is accepted in the TMIS environment.

Dependability of technical items: Problems of standardization

NASA Astrophysics Data System (ADS)

Fedotova, G. A.; Voropai, N. I.; Kovalev, G. F.

2016-12-01

This paper is concerned with problems blown up in the development of a new version of the Interstate Standard GOST 27.002 "Industrial product dependability. Terms and definitions". This Standard covers a wide range of technical items and is used in numerous regulations, specifications, standard and technical documentation. A currently available State Standard GOST 27.002-89 was introduced in 1990. Its development involved a participation of scientists and experts from different technical areas, its draft was debated in different audiences and constantly refined, so it was a high quality document. However, after 25 years of its application it's become necessary to develop a new version of the Standard that would reflect the current understanding of industrial dependability, accounting for the changes taking place in Russia in the production, management and development of various technical systems and facilities. The development of a new version of the Standard makes it possible to generalize on a terminological level the knowledge and experience in the area of reliability of technical items, accumulated over a quarter of the century in different industries and reliability research schools, to account for domestic and foreign experience of standardization. Working on the new version of the Standard, we have faced a number of issues and problems on harmonization with the International Standard IEC 60500-192, caused first of all by different approaches to the use of terms and differences in the mentalities of experts from different countries. The paper focuses on the problems related to the chapter "Maintenance, restoration and repair", which caused difficulties for the developers to harmonize term definitions both with experts and the International Standard, which is mainly related to differences between the Russian concept and practice of maintenance and repair and foreign ones.

Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen, Ba Nghiep; Simmons, Kevin L.

This quarterly report summarizes the status for the project planning to complete all the legal and contract documents required for establishing the subcontracts needed and a Cooperative Research and Development Agreement (CRADA) with Autodesk, Inc., Toyota Motor Engineering and Manufacturing North America (Toyota), and Magna Exterior and Interiors Corporation (Magna). During the second quarter (1/1/2013 to 3/31/2013), all the technical and legal documents for the subcontracts to Purdue University, University of Illinois, and PlastiComp, Inc. were completed. The revised CRADA documents were sent to DOE, Autodesk, Toyota, and Magna for technical and legal reviews. PNNL Legal Services contacted project partners’more » Legal counterparts for completing legal documents for the project. A non-disclosure agreement was revised and sent to all the parties for reviews.« less

76 FR 3133 - Science Advisory Board Staff Office; Notification of a Public Teleconference of the Science...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-19

... document (TSD), Methods and Approaches for Deriving Numeric Criteria for Nitrogen/Phosphorus Pollution in Florida's Estuaries, Coastal Waters, and Southern Inland Flowing Waters. The draft TSD describes methods... discuss its draft report reviewing EPA's technical support document on development of numeric nutrient...

INTEGRATED AIR POLLUTION CONTROL SYSTEM VERSION 5.0 - VOLUME 2: TECHNICAL DOCUMENTATION

EPA Science Inventory

The three volume report and two diskettes document the Integrated Air Pollution Control System (IAPCS), developed for the U.S. EPA to estimate costs and performance for emission control systems applied to coal-fired utility boilers. The model can project a material balance, an eq...

BASIC Language Flow Charting Program (BASCHART). Technical Note 3-82.

ERIC Educational Resources Information Center

Johnson, Charles C.; And Others

This document describes BASCHART, a computer aid designed to decipher and automatically flow chart computer program logic; it also provides the computer code necessary for this process. Developed to reduce the labor intensive manual process of producing a flow chart for an undocumented or inadequately documented program, BASCHART will…

Desktop Access to Full-Text NACA and NASA Reports: Systems Developed by NASA Langley Technical Library

NASA Technical Reports Server (NTRS)

Ambur, Manjula Y.; Adams, David L.; Trinidad, P. Paul

1997-01-01

NASA Langley Technical Library has been involved in developing systems for full-text information delivery of NACA/NASA technical reports since 1991. This paper will describe the two prototypes it has developed and the present production system configuration. The prototype systems are a NACA CD-ROM of thirty-three classic paper NACA reports and a network-based Full-text Electronic Reports Documents System (FEDS) constructed from both paper and electronic formats of NACA and NASA reports. The production system is the DigiDoc System (DIGItal Documents) presently being developed based on the experiences gained from the two prototypes. DigiDoc configuration integrates the on-line catalog database World Wide Web interface and PDF technology to provide a powerful and flexible search and retrieval system. It describes in detail significant achievements and lessons learned in terms of data conversion, storage technologies, full-text searching and retrieval, and image databases. The conclusions from the experiences of digitization and full- text access and future plans for DigiDoc system implementation are discussed.

Repository of not readily available documents for project W-320

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conner, J.C.

1997-04-18

The purpose of this document is to provide a readily available source of the technical reports needed for the development of the safety documentation provided for the waste retrieval sluicing system (WRSS), designed to remove the radioactive and chemical sludge from tank 241-C-106, and transport that material to double-shell tank 241-AY-102 via a new, temporary, shielded, encased transfer line.

Jerome I. Friedman, Henry W. Kendall, Richard E. Taylor and the Development

Science.gov Websites

on the Web. Documents: Experimental Search for a Heavy Electron, DOE Technical Report, September 1967 1967 (Taylor, R. E.) Deep Inelastic Electron Scattering: Experimental, DOE Technical Report, October page may take you to non-federal websites. Their policies may differ from this site. Website Policies

Utah's Best Project: Behavioral and Educational Strategies for Teachers. Technical Assistance Manuals, Edited Versions.

ERIC Educational Resources Information Center

Reavis, H. Kenton, Ed.; And Others

The 10 Technical Assistance Manuals compiled in this document were produced under cooperative agreements between the Utah State Office of Education and several school districts. Each module, an entity unto itself, is designed to assist classroom teachers with developing behavioral and educational strategies, concentrating on the objectives,…

Marketing Technology. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document presents the Ohio Integrated Technical and Academic Competency profile for marketing technology. The profile is to serve as the basis for curriculum development in Ohio's secondary, adult, and postsecondary programs. The profile includes a comprehensive listing of 580 specialty and foundation key indicators for evaluating mastery of…

O*NET Final Technical Report. Volume I [and] Volume II [and] Volume III.

ERIC Educational Resources Information Center

Peterson, Norman G.; Mumford, Michael D.; Borman, Walter C.; Jeanneret, P. Richard; Fleishman, Edwin A.; Levin, Kerry Y.

This document contains the three volumes of the technical report for development of the prototype of the Occupational Information Network (O*NET), which is intended to replace the "Dictionary of Occupational Titles.""General Introduction" (Norman G. Peterson) presents an overview of O*NET's purpose, content, and structure.…

Safety in Trade and Industrial and Technical Education.

ERIC Educational Resources Information Center

Thomas, John C.

Intended to serve as a resource guide to assist trade, industrial, and technical teachers in maintaining an effective and efficient safety program, the document does not contain information concerning the many specific operations of the various trades. The materials serve as a background for teachers as they develop their own units of instruction…

Practical Nursing. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the field of practical nursing; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for…

Public Safety Core. Integrated Academic and Technical Competencies (ITAC).

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document, which lists the public safety core competencies that are part of the Integrated Academic and Technical Competencies (ITAC) in Ohio, is intended to assist individuals and organizations develop a course to provide students with knowledge and skills applicable to public safety careers, including but not limited to firefighter,…

Advanced Transportation System Studies Technical Area 2 (TA-2) Heavy Lift Launch Vehicle Development Contract. Volume 2; Technical Results

NASA Technical Reports Server (NTRS)

1995-01-01

The purpose of the Advanced Transportation System Studies (ATSS) Technical Area 2 (TA-2) Heavy Lift Launch Vehicle Development contract was to provide advanced launch vehicle concept definition and analysis to assist NASA in the identification of future launch vehicle requirements. Contracted analysis activities included vehicle sizing and performance analysis, subsystem concept definition, propulsion subsystem definition (foreign and domestic), ground operations and facilities analysis, and life cycle cost estimation. This document is Volume 2 of the final report for the contract. It provides documentation of selected technical results from various TA-2 analysis activities, including a detailed narrative description of the SSTO concept assessment results, a user's guide for the associated SSTO sizing tools, an SSTO turnaround assessment report, an executive summary of the ground operations assessments performed during the first year of the contract, a configuration-independent vehicle health management system requirements report, a copy of all major TA-2 contract presentations, a copy of the FLO launch vehicle final report, and references to Pratt & Whitney's TA-2 sponsored final reports regarding the identification of Russian main propulsion technologies.

Aeroservoelastic and Flight Dynamics Analysis Using Computational Fluid Dynamics

NASA Technical Reports Server (NTRS)

Arena, Andrew S., Jr.

1999-01-01

This document in large part is based on the Masters Thesis of Cole Stephens. The document encompasses a variety of technical and practical issues involved when using the STARS codes for Aeroservoelastic analysis of vehicles. The document covers in great detail a number of technical issues and step-by-step details involved in the simulation of a system where aerodynamics, structures and controls are tightly coupled. Comparisons are made to a benchmark experimental program conducted at NASA Langley. One of the significant advantages of the methodology detailed is that as a result of the technique used to accelerate the CFD-based simulation, a systems model is produced which is very useful for developing the control law strategy, and subsequent high-speed simulations.

Implementation Plan for Qualification of Sodium-Cooled Fast Reactor Technology Information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Wayne; Honma, George

This document identifies and discusses implementation elements that can be used to facilitate consistent and systematic evaluation processes relating to quality attributes of technical information (with focus on SFR technology) that will be used to support licensing of advanced reactor designs. Information may include, but is not limited to, design documents for SFRs, research-and-development (R&D) data and associated documents, test plans and associated protocols, operations and test data, international research data, technical reports, and information associated with past U.S. Nuclear Regulatory Commission (NRC) reviews of SFR designs. The approach for determining acceptability of test data, analysis, and/or other technical informationmore » is based on guidance provided in INL/EXT-15-35805, “Guidance on Evaluating Historic Technology Information for Use in Advanced Reactor Licensing.” The implementation plan can be adopted into a working procedure at each of the national laboratories performing data qualification, or by applicants seeking future license application for advanced reactor technology.« less

McKenzie River Subbasin Assessment, Technical Report 2000.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alsea Geospatial, Inc.

2000-02-01

This document details the findings of the McKenzie River Subbasin Assessment team. The goal of the subbasin assessment is to provide an ecological assessment of the McKenzie River Floodplain, identification of conservation and restoration opportunities, and discussion of the influence of some upstream actions and processes. This Technical Report can be viewed in conjunction with the McKenzie River Subbasin Summary or as a stand-alone document. The purpose of the technical report is to detail the methodology and findings of the consulting team that the observations and recommendations in the summary document are based on. This part, Part I, provides anmore » introduction to the subbasin and a general overview. Part II details the specific findings of the science team. Part III provides an explanation and examples of how to use the data that has been developed through this assessment to aid in prioritizing restoration activities. Part III also includes the literature cited and appendices.« less

The World Health Organization's safe abortion guidance document.

PubMed

Van Look, Paul F A; Cottingham, Jane

2013-04-01

We discuss the history of the World Health Organization's (WHO's) development of guidelines for governments on providing safe abortion services, which WHO published as Safe Abortion: Technical and Policy Guidance for Health Systems in 2003 and updated in 2012. We show how the recognition of the devastating impact of unsafe abortion on women's health and survival, the impetus of the International Conference on Population and Development and its five-year follow-up, and WHO's progressive leadership at the end of the century enabled the organization to elaborate guidance on providing safe abortion services. Guideline formulation involved extensive review of published evidence, an international technical expert meeting to review the draft document, and a protracted in-house review by senior WHO management.

Proceedings-1979 third annual practical conference on communication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-04-01

Topics covered at the meeting include: nonacademic writing, writer and editor training in technical publications, readability of technical documents, guide for beginning technical editors, a visual aids data base, newsletter publishing, style guide for a project management organization, word processing, computer graphics, text management for technical documentation, and typographical terminology.

Longitudinal Surveys of Australian Youth (LSAY) 2009 Cohort User Guide: Data Elements B1--Education (School and School Transition). Technical Paper 74B1

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2012

2012-01-01

This is a support document to the "Longitudinal Surveys of Australian Youth (LSAY) 2009 Cohort User Guide" report. Developed for users of LSAY, the user guide consolidates information about the LSAY 2009 cohort into one document. This support document provides school and school transition information for the guide. [For the main report,…

Product specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 3

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the third of five volumes on Information System Life-Cycle and Documentation Standards which present a well organized, easily used standard for providing technical information needed for developing information systems, components, and related processes. This volume states the Software Management and Assurance Program documentation standard for a product specification document and for data item descriptions. The framework can be applied to any NASA information system, software, hardware, operational procedures components, and related processes.

ASSIST internals reference manual

NASA Technical Reports Server (NTRS)

Johnson, Sally C.; Boerschlein, David P.

1994-01-01

The Abstract Semi-Markov Specification Interface to the SURE Tool (ASSIST) program was developed at NASA LaRC in order to analyze the reliability of virtually any fault-tolerant system. A user manual was developed to detail its use. Certain technical specifics are of no concern to the end user, yet are of importance to those who must maintain and/or verify the correctness of the tool. This document takes a detailed look into these technical issues.

Challenges in reusing transactional data for daily documentation in neonatal intensive care.

PubMed

Kim, G R; Lawson, E E; Lehmann, C U

2008-11-06

The reuse of transactional data for clinical documentation requires navigation of computational, institutional and adaptive barriers. We describe organizational and technical issues in developing and deploying a daily progress note tool in a tertiary neonatal intensive care unit that reuses and aggregates data from a commercial integrated clinical information system.

Eldercare. Technical Advisory Committee on Occupational Curriculum Development.

ERIC Educational Resources Information Center

Northern Montana Coll., Havre. Montana Center for Vocational Education, Research, Curriculum and Personnel Development.

This document contains the secondary education model curriculum for the secondary education preparation of home health aides in Montana. The document includes: (1) an introduction and a rationale for the program; (2) skills required by programs that meet certification requirements for a long-term care nurse aide (75 hours) and home health aide (an…

A Guidance Document for Kentucky's Oil and Gas Operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

1998-11-10

This technical report is a summary of the progress made for "A Guidance Document for Kentucky's Oil and Gas Operators". During this quarter, the document received continued review and editing in an elec-tronic format to satisfy the United States Department of Energy (DOE). Comments received from oil and gas operators reviewing this document prompted contact to be made with the United States Environmental Protection Agency (USEPA) to develop an addendum section to provide better explanation of USEPA requirements for Class II injection wells in Kentucky.

Identifying and Planning for New and Emerging Occupations: A Suggested Guide.

ERIC Educational Resources Information Center

Meleen, Paulette; And Others

Intended for use by State vocational education directors and curriculum planners, this guide documents the results of a project which developed and applied a process for identifying new and emerging occupations for skilled and technical areas, part of a larger effort to assist the alignment of vocational and technical program offerings with new…

National Profiles in Technical and Vocational Education in Asia and the Pacific: Malaysia.

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

One of a series of studies on the development of technical and vocational education in the member states of UNESCO, this report profiles the educational system in Malaysia. The four parts of the document provide general information about the following: the country; the history, philosophy, and structure of the educational system; vocational…

Fifty Indices of Effectiveness Regarding the Program Advisory Committees in Minnesota's Technical Colleges: A Working Paper. Effective Advisory Committees Project.

ERIC Educational Resources Information Center

Mercer, John W.; Meunier, Greg R.

This document, which was developed by a task force whose members represent the instructional, student support service, administrative, and executive ranks of technical colleges with very diverse sizes, locations, and programs, lists 50 proposed indices of effectiveness regarding the program advisory committees (ACs) in Minnesota's technical…

Longitudinal Surveys of Australian Youth (LSAY) 2003 Cohort: User Guide. Technical Report 54

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2010

2010-01-01

The Longitudinal Surveys of Australian Youth (LSAY) is a research program that tracks young people as they move from school into further study, work and other destinations. This "User guide" has been developed for users of the LSAY data. The guide endeavours to consolidate existing technical documentation and other relevant information…

AgRISTARS documents tracking list report

NASA Technical Reports Server (NTRS)

Hawkins, J. L.

1983-01-01

A quarterly listing of documents issued and placed in the AgRISTARS tracking system is provided. The technical publications are arranged by type of documents. The reference AgRISTARS document number, title and date of publication, the issuing organization, and the National Technical Information Service reference number is given.

Draft federal GHG accounting and reporting : technical support document

DOT National Transportation Integrated Search

2010-07-01

This is a technical support document (TSD) that accompanies the Federal Greenhouse Gas Accounting and Reporting Guidance (or Guidance). This document provides detailed information on the inventory reporting process and accepted calculation methodolog...

Patent Documents as a Resource for Studies and Education in Geophysics - An Approach.

NASA Astrophysics Data System (ADS)

Wollny, K. G.

2016-12-01

Patents are a highly neglected source of information in geophysics, although they supply a wealth of technical and historically relevant data and might be an important asset for researchers and students. The technical drawings and descriptions in patent documents provide insight into the personal work of a researcher or a scientific group and give detailed technical background information, show interdisciplinary solutions for similar problems, help to learn about inventions too advanced for their time but maybe useful now, and to explore the historical background and timelines of inventions and their inventors. It will be shown how to get access to patent documents and how to use them for research and education purposes. Exemplary inventions by well-known geoscientists or scientists in related fields will be presented to illustrate the usefulness of patent documents. The data pool used is the International Patent Classification (IPC) class G01V that the United Nations' World Intellectual Property Organisation (WIPO) has set up mainly for inventions with key aspects in geophysics. This class contains approximately 235,000 patent documents (July 2016) for methods, apparatuses or scientific instruments developed during scientific projects or by geophysical companies. The patent documents can be accessed via patent databases. The most important patent databases are for free, search functionality is self-explanatory and the amount of information to be extracted is enormous. For example, more than 90 million multilingual patent documents are currently available online (July 2016) in DEPATIS database of the German Patent and Trade Mark Office or ESPACENET of the European Patent Office. To summarize, patent documents are a highly useful tool for educational and research purposes to strengthen students' and scientists' knowledge in a practically orientated geophysical field and to widen the horizon to adjacent technical areas. Last but not least, they also provide insight into historical aspects of geophysics and the persons working in that area.

Experiment Document for 01-E077 Microgravity Investigation of Crew Reactions in 0-G (MICRO-G)

NASA Technical Reports Server (NTRS)

Newman, Dava J.

2003-01-01

The Experiment Document (ED) serves the following purposes: a) It provides a vehicle for Principal Investigators (PIS) to formally specify the requirements for performing their experiments. b) It provides a technical Statement of Work (SOW). c) It provides experiment investigators and hardware developers with a convenient source of information about Human Life Sciences (HLS) requirements for the development and/or integration of flight experiment projects. d) It is the primary source of experiment specifications for the HLS Research Program Office (RPO). Inputs from this document will be placed into a controlled database that will be used to generate other documents.

GCS programmer's manual

NASA Technical Reports Server (NTRS)

Lowman, Douglas S.; Withers, B. Edward; Shagnea, Anita M.; Dent, Leslie A.; Hayhurst, Kelly J.

1990-01-01

A variety of instructions to be used in the development of implementations of software for the Guidance and Control Software (GCS) project is described. This document fulfills the Radio Technical Commission for Aeronautics RTCA/DO-178A guidelines, 'Software Considerations in Airborne Systems and Equipment Certification' requirements for document No. 4, which specifies the information necessary for understanding and programming the host computer, and document No. 12, which specifies the software design and implementation standards that are applicable to the software development and testing process. Information on the following subjects is contained: activity recording, communication protocol, coding standards, change management, error handling, design standards, problem reporting, module testing logs, documentation formats, accuracy requirements, and programmer responsibilities.

Septic Systems Guidance, Policy, and Regulations

EPA Pesticide Factsheets

EPA has developed several documents outlining its mission, priorities and regulatory authorities as well as guidance and technical information to help communities establish comprehensive septic (onsite) management programs.

Overview of Energy Systems' safety analysis report programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility's safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This Overview of Energy Systems Safety Analysis Report Programs'' Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

Overview of Energy Systems` safety analysis report programs. Safety Analysis Report Update Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

The primary purpose of an Safety Analysis Report (SAR) is to provide a basis for judging the adequacy of a facility`s safety. The SAR documents the safety analyses that systematically identify the hazards posed by the facility, analyze the consequences and risk of potential accidents, and describe hazard control measures that protect the health and safety of the public and employees. In addition, some SARs document, as Technical Safety Requirements (TSRs, which include Technical Specifications and Operational Safety Requirements), technical and administrative requirements that ensure the facility is operated within prescribed safety limits. SARs also provide conveniently summarized information thatmore » may be used to support procedure development, training, inspections, and other activities necessary to facility operation. This ``Overview of Energy Systems Safety Analysis Report Programs`` Provides an introduction to the programs and processes used in the development and maintenance of the SARs. It also summarizes some of the uses of the SARs within Energy Systems and DOE.« less

[Protection of working mothers: operational guide document. The Marche Regional Section of the Italian Society of Occupational Health and Industrial Hygiene (SIMLII) ].

PubMed

Alessandroni, Morena; Balzani, Barbara; Cancellieri, Francesca; Colao, Annamaria; Comai, M; Elezi, Lindita; Mengucci, Rosella; Montesi, Simona; Olivi, Cinzia; Perticaroli, Patrizia; Pettinari, A; Ruschioni, Angela

2013-01-01

Protection of working mothers: operational guide document. The aim of this operational guide document is to protect the health of working mothers and their babies during pregnancy, puerperium and breastfeeding. The project was developed by a technical working group which included professionals in the pertinent fields from the Workplace Prevention and Safety Services of the local Vasta-2 Area of the Marche Regional Health Service:physicians, health assistants, and nurses. It is considered to be a useful tool for risk assessment at the workplace aimed at professionals who are involved, with various duties and responsibilities, in the health care of the working mother. This paper consists of two functionally related sections, "Table of risks" and "Technical specifications". In the "Table of Risks" section, the occupational hazards for women during pregnancy or postpartum were analyzed with the highest possible degree of care. To this end the technical group provided, for each occupational hazard, its own operational suggestions, in relation to legislation, current scientific knowledge and Guidelines of other Italian Regions. The Marche Regional Section of the Italian Society of Occupational Health and Industrial Hygiene (SIMLII) participated in the final draft of the entire document. The second section, "Technical Specifications", illustrates the main tasks and any risks involved in the 34 manufacturing sectors most prevalent in this area. This operational guide document is intended to be the beginning of a common strategy in public health to achieve a wider field of action in promotion and information aimed at protecting the reproductive health of working mothers.

EDI and the Technical Communicator.

ERIC Educational Resources Information Center

Eiler, Mary Ann

1994-01-01

Assesses the role of technical communicators in electronic data interchange (EDI). Argues that, as experts in information design, human factors, instructional theory, and professional writing, technical communicators should be advocates of standard documentation protocols and should rethink the traditional concepts of "document" to…

Technical Writing in the Computer Industry: Job Opportunities for PH.D.'s.

ERIC Educational Resources Information Center

Turnbull, Andrew D.

1981-01-01

Answers questions about the field of technical writing, especially in the computer industry. Explains what "software" and "software documentation" are, what the "software documentation specialist" (technical writer) does, and how to prepare for such a job. (FL)

Method of Characteristic (MOC) Nozzle Flowfield Solver - User’s Guide and Input Manual Version 2.0

DTIC Science & Technology

2018-01-01

TECHNICAL REPORT RDMR-SS-17-13 METHOD OF CHARACTERISTIC (MOC) NOZZLE FLOWFIELD SOLVER—USER’S GUIDE AND INPUT MANUAL VERSION 2.0 Kevin D. Kennedy...System Simulation and Development Directorate Aviation and Missile Research , Development, and Engineering Center January 2018 Distribution Statement...DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT. DISCLAIMER THE FINDINGS IN THIS REPORT

High Technology Engineering Services, Inc. fiscal year 1993 and 1994 research and development report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This document has been prepared by the Professional Staff of High Technology Engineering Services, Inc. (HTES) for fiscal year (FY) 1993. Work was performed for various aspects of mechanical design and analysis, materials development and properties quantification, nuclear environment performance, and engineering program prioritization. The tasks enumerated in the subcontract, attachment B are: 1. Assist in preparation of final R&D report for SDC detector development. 2. Subcontractor shall make contributions to the development of innovative processes for the manufacture of quasi- isotropic, enhanced thermal conductivity compression molded advanced composite materials. 3. Perform finite element analysis as it relates to themore » Superconducting Super Collider Silicon Tracking System, both mechanical and thermal, of very thin section advanced composite materials. 4. Subcontractor shall perform technical studies, reviews, and assessments of the current program for advanced composites materials processing and testing. 5. Subcontractor shall attend meetings and discussions as directed by MEE-12 technical representative. Unfortunately during the course of FY93, technical and financial challenges prevailed against the aggressive goals set for the program. In point of fact, less than 25% of the contract value was able to be expended due to technical delays and programmatic funding cuts. Also, contracting difficulties with the SSC Lab and financial burdens at Los Alamos totally stopped progress on the subject subcontract during the whole of FY94. This was a great blow to me and the HTES, Inc. technical staff. Despite the negative influences over the years, significant progress was made in materials properties quantification and development of essential research and development documentation. The following brief report and attendant appendices will address these achievements.« less

National projections of forest and rangeland condition indicators: a supporting technical document for the 1999 RPA assessment.

Treesearch

John Hof; Curtis Flather; Tony Baltic; Stephen Davies

1999-01-01

The 1999 forest and rangeland condition indicator model is a set of independent econometric production functions for environmental outputs (measured with condition indicators) at the national scale. This report documents the development of the database and the statistical estimation required by this particular production structure with emphasis on two special...

Structured Hypermedia Application Development Model (SHADM): A structured Model for Technical Documentation Application Design

DTIC Science & Technology

1991-12-01

effective (19:15) Figure 2 details a flowchart of the basic steps in prototyping. The basic concept behind prototyping is to quickly produce a working...One approach to overcoming this is to structure the document relative to the experience level of the user (14:49). A "novice" or beginner would

Management Information System for Vocational Education. MISVE Technical Description. Research and Development Series No. 127E.

ERIC Educational Resources Information Center

Hulse, Ira; And Others

One of six documents describing the Management Information System for Vocational Education (MISVE), this document is intended for MISVE managers and electronic data processing (EDP) operations staff who would be responsible for the implementation and maintenance of the MISVE on the computer. (MISVE was designed to provide users with an advanced…

Aeronautical Engineering: A continuing bibliography

NASA Technical Reports Server (NTRS)

1982-01-01

This bibliography lists 347 reports, articles and other documents introduced into the scientific and technical information system. Documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated compounds, equipment, and systems are included. Research and development in aerodynamics, aeronautics and ground support equipment for aeronautical vehicles are also included.

KSC Technical Capabilities Website

NASA Technical Reports Server (NTRS)

Nufer, Brian; Bursian, Henry; Brown, Laurette L.

2010-01-01

This document is the website pages that review the technical capabilities that the Kennedy Space Center (KSC) has for partnership opportunities. The purpose of this information is to make prospective customers aware of the capabilities and provide an opportunity to form relationships with the experts at KSC. The technical capabilities fall into these areas: (1) Ground Operations and Processing Services, (2) Design and Analysis Solutions, (3) Command and Control Systems / Services, (4) Materials and Processes, (5) Research and Technology Development and (6) Laboratories, Shops and Test Facilities.

75 FR 68606 - Chetco River Gravel Mining Executive and Technical Teams; Notification of Availability of Documents.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-08

... Executive and Technical Teams; Notification of Availability of Documents. AGENCY: U.S. Army Corps of... public all work products of the Chetco River Gravel Mining Executive and Technical Teams. These work... INFORMATION: The Executive and Technical Teams were established in 2007 as part of an initiative to evaluate...

Review of USGS Open-file Report 95-525 ("Cartographic and digital standard for geologic map information") and plans for development of Federal draft standards for geologic map information

USGS Publications Warehouse

Soller, David R.

1996-01-01

This report summarizes a technical review of USGS Open-File Report 95-525, 'Cartographic and Digital Standard for Geologic Map Information' and OFR 95-526 (diskettes containing digital representations of the standard symbols). If you are considering the purchase or use of those documents, you should read this report first. For some purposes, OFR 95-525 (the printed document) will prove to be an excellent resource. However, technical review identified significant problems with the two documents that will be addressed by various Federal and State committees composed of geologists and cartographers, as noted below. Therefore, the 2-year review period noted in OFR 95-525 is no longer applicable. Until those problems are resolved and formal standards are issued, you may consult the following World-Wide Web (WWW) site which contains information about development of geologic map standards: URL: http://ncgmp.usgs.gov/ngmdbproject/home.html

Reviews of Data on Science Resources, No. 29. Current and Future Utilization of Scientific and Technical Personnel in Energy-Related Activities.

ERIC Educational Resources Information Center

National Science Foundation, Washington, DC. Div. of Science Resources Studies.

This National Science Foundation (NSF) bulletin summarizes the NSF program of energy manpower studies that assessed the impact of past energy developments and future options for scientific and technical manpower. This document summarizes the utilization of scientific personnel in energy-related activities in private industry in 1975 and shortages…

Technical Manual for the SAM Physical Trough Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, M. J.; Gilman, P.

2011-06-01

NREL, in conjunction with Sandia National Lab and the U.S Department of Energy, developed the System Advisor Model (SAM) analysis tool for renewable energy system performance and economic analysis. This paper documents the technical background and engineering formulation for one of SAM's two parabolic trough system models in SAM. The Physical Trough model calculates performance relationships based on physical first principles where possible, allowing the modeler to predict electricity production for a wider range of component geometries than is possible in the Empirical Trough model. This document describes the major parabolic trough plant subsystems in detail including the solar field,more » power block, thermal storage, piping, auxiliary heating, and control systems. This model makes use of both existing subsystem performance modeling approaches, and new approaches developed specifically for SAM.« less

The World Health Organization’s Safe Abortion Guidance Document

PubMed Central

Van Look, Paul F. A.; Cottingham, Jane

2013-01-01

We discuss the history of the World Health Organization’s (WHO’s) development of guidelines for governments on providing safe abortion services, which WHO published as Safe Abortion: Technical and Policy Guidance for Health Systems in 2003 and updated in 2012. We show how the recognition of the devastating impact of unsafe abortion on women’s health and survival, the impetus of the International Conference on Population and Development and its five-year follow-up, and WHO’s progressive leadership at the end of the century enabled the organization to elaborate guidance on providing safe abortion services. Guideline formulation involved extensive review of published evidence, an international technical expert meeting to review the draft document, and a protracted in-house review by senior WHO management. PMID:23409886

Traceability of Software Safety Requirements in Legacy Safety Critical Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.

2007-01-01

How can traceability of software safety requirements be created for legacy safety critical systems? Requirements in safety standards are imposed most times during contract negotiations. On the other hand, there are instances where safety standards are levied on legacy safety critical systems, some of which may be considered for reuse for new applications. Safety standards often specify that software development documentation include process-oriented and technical safety requirements, and also require that system and software safety analyses are performed supporting technical safety requirements implementation. So what can be done if the requisite documents for establishing and maintaining safety requirements traceability are not available?

Technical Basis for Electromagnetic Compatibility Regulatory Guidance Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ewing, Paul D.; Korsah, Kofi; Harrison, Thomas J.

2016-03-01

The objective of this report is to serve as the technical basis document for the next, planned revision of this RG that highlights and provides the rationale for the recommended changes. The structure of this document follows and summarizes the several assessment activities undertaken during the course of this project to evaluate new and updated electromagnetic compatibility (EMC) standards, testing methods and limits, and relevant technology developments being incorporated into plant activities that may have EMI/RFI implications, as well as other specific issues, including impacts of electrostatic discharge (ESD) on safety equipment and impacts on increased usage of wireless devicesmore » in nuclear power plants.« less

TECHNICAL GUIDANCE DOCUMENT: QUALITY ASSURANCE AND QUALITY CONTROL FOR WASTE CONTAINMENT FACILITIES

EPA Science Inventory

This Technical Guidance Document provides comprehensive guidance on procedures for quality assurance and quality control for waste containment facilities. he document includes a discussion of principles and concepts, compacted soil liners, soil drainage systems, geosynthetic drai...

TECHNICAL GUIDANCE DOCUMENT: QUALITY ASSURANCE AND QUALITY CONTROL FOR WASTE CONTAINMENT FACILITIES

EPA Science Inventory

This Technical Guidance Document provides comprehensive guidance on procedures for quality assurance and quality control for waste containment facilities. The document includes a discussion of principles and concepts, compacted soil liners, soil drainage systems, geosynthetic dr...

A strategy for electronic dissemination of NASA Langley technical publications

NASA Technical Reports Server (NTRS)

Roper, Donna G.; Mccaskill, Mary K.; Holland, Scott D.; Walsh, Joanne L.; Nelson, Michael L.; Adkins, Susan L.; Ambur, Manjula Y.; Campbell, Bryan A.

1994-01-01

To demonstrate NASA Langley Research Center's relevance and to transfer technology to external customers in a timely and efficient manner, Langley has formed a working group to study and recommend a course of action for the electronic dissemination of technical reports (EDTR). The working group identified electronic report requirements (e.g., accessibility, file format, search requirements) of customers in U.S. industry through numerous site visits and personal contacts. Internal surveys were also used to determine commonalities in document preparation methods. From these surveys, a set of requirements for an electronic dissemination system was developed. Two candidate systems were identified and evaluated against the set of requirements: the Full-Text Electronic Documents System (FEDS), which is a full-text retrieval system based on the commercial document management package Interleaf, and the Langley Technical Report Server (LTRS), which is a Langley-developed system based on the publicly available World Wide Web (WWW) software system. Factors that led to the selection of LTRS as the vehicle for electronic dissemination included searching and viewing capability, current system operability, and client software availability for multiple platforms at no cost to industry. This report includes the survey results, evaluations, a description of the LTRS architecture, recommended policy statement, and suggestions for future implementations.

Management of technical date in Nihon Doro kodan

NASA Astrophysics Data System (ADS)

Hanada, Jun'ichi

Nihon Doro Kodan Laboratory has collected and contributed technical data (microfiches, aerial photographs, books and literature) on plans, designs, constructions and maintenance of the national expressways and the ordinary toll roads since 1968. This work is systematized on computer to retrieve and contribute data faster. Now Laboratory operates Technical Data Management System which manages all of technical data and Technical Document Management System which manages technical documents. These systems stand on users' on-line retrieval and data accumuration by microfiches and optical disks.

Biological Water Quality Criteria

EPA Pesticide Factsheets

Page contains links to Technical Documents pertaining to Biological Water Quality Criteria, including, technical assistance documents for states, tribes and territories, program overviews, and case studies.

Technical Basis for PNNL Beryllium Inventory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Michelle Lynn

2014-07-09

The Department of Energy (DOE) issued Title 10 of the Code of Federal Regulations Part 850, “Chronic Beryllium Disease Prevention Program” (the Beryllium Rule) in 1999 and required full compliance by no later than January 7, 2002. The Beryllium Rule requires the development of a baseline beryllium inventory of the locations of beryllium operations and other locations of potential beryllium contamination at DOE facilities. The baseline beryllium inventory is also required to identify workers exposed or potentially exposed to beryllium at those locations. Prior to DOE issuing 10 CFR 850, Pacific Northwest Nuclear Laboratory (PNNL) had documented the beryllium characterizationmore » and worker exposure potential for multiple facilities in compliance with DOE’s 1997 Notice 440.1, “Interim Chronic Beryllium Disease.” After DOE’s issuance of 10 CFR 850, PNNL developed an implementation plan to be compliant by 2002. In 2014, an internal self-assessment (ITS #E-00748) of PNNL’s Chronic Beryllium Disease Prevention Program (CBDPP) identified several deficiencies. One deficiency is that the technical basis for establishing the baseline beryllium inventory when the Beryllium Rule was implemented was either not documented or not retrievable. In addition, the beryllium inventory itself had not been adequately documented and maintained since PNNL established its own CBDPP, separate from Hanford Site’s program. This document reconstructs PNNL’s baseline beryllium inventory as it would have existed when it achieved compliance with the Beryllium Rule in 2001 and provides the technical basis for the baseline beryllium inventory.« less

Engineering Lessons Learned and Systems Engineering Applications

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.

2005-01-01

Systems Engineering is fundamental to good engineering, which in turn depends on the integration and application of engineering lessons learned. Thus, good Systems Engineering also depends on systems engineering lessons learned from within the aerospace industry being documented and applied. About ten percent of the engineering lessons learned documented in the NASA Lessons Learned Information System are directly related to Systems Engineering. A key issue associated with lessons learned datasets is the communication and incorporation of this information into engineering processes. As part of the NASA Technical Standards Program activities, engineering lessons learned datasets have been identified from a number of sources. These are being searched and screened for those having a relation to Technical Standards. This paper will address some of these Systems Engineering Lessons Learned and how they are being related to Technical Standards within the NASA Technical Standards Program, including linking to the Agency's Interactive Engineering Discipline Training Courses and the life cycle for a flight vehicle development program.

Tanks Focus Area Site Needs Assessment - FY 2001

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, Robert W.; Josephson, Gary B.; Westsik, Joseph H.

2001-04-30

The TFA uses a systematic process for developing its annual program that draws from the tanks science and technology development needs expressed by the five DOE tank waste sites. TFA's annual program development process is iterative and involves the following steps: Collection of site needs; Needs analysis; Development of technical responses and initial prioritization; Refinement of the program for the next fiscal year; Formulation of the Corporate Review Budget (CRB); Preparation of Program Execution Guidance (PEG) for the next FY Revision of the Multiyear Program Plan (MYPP). This document describes the outcomes of the first phase of this process, frommore » collection of site needs to the initial prioritization of technical activities. The TFA received site needs in October - December 2000. A total of 170 site needs were received, an increase of 30 over the previous year. The needs were analyzed and integrated, where appropriate. Sixty-six distinct technical responses were drafted and prioritized. In addition, seven strategic tasks were approved to compete for available funding in FY 2002 and FY 2003. Draft technical responses were prepared and provided to the TFA Site Representatives and the TFA User Steering Group (USG) for their review and comment. These responses were discussed at a March 15, 2001, meeting where the TFA Management Team established the priority listing in preparation for input to the DOE Office of Science and Technology (OST) budget process. At the time of publication of this document, the TFA continues to finalize technical responses as directed by the TFA Management Team and clarify the intended work scopes for FY 2002 and FY 2003.« less

THE OFFICE OF AEROSPACE RESEARCH SCIENTIFIC AND TECHNICAL INFORMATION PROGRAM

DTIC Science & Technology

The document outlines the mission and organization of the Office of Aerospace Research (OAR), then describes how its principal product, scientific...effective technical information program, are documented by examples. The role of the Office of Scientific and Technical Information within OAR as performed

Recouple: Natural Resource Strategies for Rural Economic Development.

ERIC Educational Resources Information Center

Thomas, Margaret G.

This source book provides guidance and technical assistance material on utilizing forest, agricultural, and scenic and wildlife resources for rural economic development. The document focuses on the uniqueness of existing rural resources for new enterprise opportunities. Natural resource-based economic development strategies are a means to…

Technical Support Document: Development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings - 50% Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonnema, E.; Leach, M.; Pless, S.

2013-06-01

This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-MBBR) ASHRAE et al. (2011b). The AEDG-MBBR is intended to provide recommendations for achieving 50% whole-building energy savings in retail stores over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-MBBR was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), themore » Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy.« less

Technical Support Document: Development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings - 50% Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonnema, Eric; Leach, Matt; Pless, Shanti

2013-06-05

This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-MBBR) ASHRAE et al. (2011b). The AEDG-MBBR is intended to provide recommendations for achieving 50% whole-building energy savings in retail stores over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-MBBR was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), themore » Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy.« less

Annotated bibliography of Software Engineering Laboratory literature

NASA Technical Reports Server (NTRS)

Morusiewicz, Linda; Valett, Jon

1993-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. Nearly 200 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: the Software Engineering Laboratory; the Software Engineering Laboratory: software development documents; software tools; software models; software measurement; technology evaluations; Ada technology; and data collection. This document contains an index of these publications classified by individual author.

Annotated bibliography of Software Engineering Laboratory literature

NASA Technical Reports Server (NTRS)

Morusiewicz, Linda; Valett, Jon D.

1991-01-01

An annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory is given. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. All materials have been grouped into eight general subject areas for easy reference: The Software Engineering Laboratory; The Software Engineering Laboratory: Software Development Documents; Software Tools; Software Models; Software Measurement; Technology Evaluations; Ada Technology; and Data Collection. Subject and author indexes further classify these documents by specific topic and individual author.

Functions and requirements document for interim store solidified high-level and transuranic waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith-Fewell, M.A., Westinghouse Hanford

1996-05-17

The functions, requirements, interfaces, and architectures contained within the Functions and Requirements (F{ampersand}R) Document are based on the information currently contained within the TWRS Functions and Requirements database. The database also documents the set of technically defensible functions and requirements associated with the solidified waste interim storage mission.The F{ampersand}R Document provides a snapshot in time of the technical baseline for the project. The F{ampersand}R document is the product of functional analysis, requirements allocation and architectural structure definition. The technical baseline described in this document is traceable to the TWRS function 4.2.4.1, Interim Store Solidified Waste, and its related requirements, architecture,more » and interfaces.« less

GridAPPS-D Conceptual Design v1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Melton, Ronald B.; Schneider, Kevin P.; McDermott, Thomas E.

2017-05-31

The purpose of this document is to provide a conceptual design of the distribution system application development platform being developed for the U.S. Department of Energy’s Advanced Distribution Management System (ADMS) Program by the Grid Modernization Laboratory Consortium project GM0063. The platform will be referred to as GridAPPS-D. This document provides a high level, conceptual view of the platform and provides related background and contextual information. This document is intended to both educate readers about the technical work of the project and to serve as a point of reference for the project team. The document will be updated as themore » project progresses.« less

System configuration management plan for 101-SY Hydrogen Mitigation Test Project Mini-Data Acquisition and Control System of Tank Waste Remediation System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vargo, G.F. Jr.

1994-10-11

The DOE Standard defines the configuration management program by the five basic program elements of ``program management,`` ``design requirements,`` ``document control,`` ``change control,`` and ``assessments,`` and the two adjunct recovery programs of ``design reconstitution,`` and ``material condition and aging management. The C-M model of five elements and two adjunct programs strengthen the necessary technical and administrative control to establish and maintain a consistent technical relationship among the requirements, physical configuration, and documentation. Although the DOE Standard was originally developed for the operational phase of nuclear facilities, this plan has the flexibility to be adapted and applied to all life-cycle phasesmore » of both nuclear and non-nuclear facilities. The configuration management criteria presented in this plan endorses the DOE Standard and has been tailored specifically to address the technical relationship of requirements, physical configuration, and documentation during the full life-cycle of the 101-SY Hydrogen Mitigation Test Project Mini-Data Acquisition and Control System of Tank Waste Remediation System.« less

Storyboarding: A Concrete Way to Generate Effective Visuals.

ERIC Educational Resources Information Center

Larkin, Greg

1996-01-01

Advances the idea that storyboarding, long associated with scriptwriting, advertising, and more recently with technical manuals, can be successfully applied to an even broader variety of technical documents. Applies storyboarding techniques to designing technical proposals to suggest methods of incorporating more visuals into documents, as well as…

Evaluation of Searching and Rescue (SAR) Method For Determining Local Wind Current

DTIC Science & Technology

1991-07-01

JUL 10 1992 ("= Research ajJ Development Centerto 1082 Shennecossett Road . - Groton, CT 06340-6096 INTERIM REPORT July 1991 This document is...United States Coast Guard Research and Development Center 1082 Shennecossett Road Groton, CT 06340-6096 V ’C . l •• mU. Technical Report Documentation...Grant No. 1082 Shennecossett Road Groton, Connecticut 06340-6096 13. Type of Report and Period Covered 12. Sponsoring Agency Name and Address INTERIM

Methods to Develop Inhalation Cancer Risk Estimates for ...

EPA Pesticide Factsheets

This document summarizes the approaches and rationale for the technical and scientific considerations used to derive inhalation cancer risks for emissions of chromium and nickel compounds from electric utility steam generating units. The purpose of this document is to discuss the methods used to develop inhalation cancer risk estimates associated with emissions of chromium and nickel compounds from coal- and oil-fired electric utility steam generating units (EGUs) in support of EPA's recently proposed Air Toxics Rule.

Electronic document distribution: Design of the anonymous FTP Langley Technical Report Server

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Gottlich, Gretchen L.

1994-01-01

An experimental electronic dissemination project, the Langley Technical Report Server (LTRS), has been undertaken to determine the feasibility of delivering Langley technical reports directly to the desktops of researchers worldwide. During the first six months, over 4700 accesses occurred and over 2400 technical reports were distributed. This usage indicates the high level of interest that researchers have in performing literature searches and retrieving technical reports at their desktops. The initial system was developed with existing resources and technology. The reports are stored as files on an inexpensive UNIX workstation and are accessible over the Internet. This project will serve as a foundation for ongoing projects at other NASA centers that will allow for greater access to NASA technical reports.

Technical Support Document: Development of the Advanced Energy Design Guide for Grocery Stores--50% Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hale, E. T.; Macumber, D. L.; Long, N. L.

2008-09-01

This report provides recommendations that architects, designers, contractors, developers, owners, and lessees of grocery store buildings can use to achieve whole-building energy savings of at least 50% over ASHRAE Standard 90.1-2004.

JAGUAR developer's manual.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chan, Ethan

2011-06-01

JAGUAR (JAva GUi for Applied Research) is a Java software tool providing an advanced text editor and graphical user interface (GUI) to manipulate DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) input specifications. This document focuses on the technical background necessary for a developer to understand JAGUAR.

Developing School Policies and Procedures for Physical Restraint and Seclusion in Nebraska Schools. A Technical Assistance Document

ERIC Educational Resources Information Center

Peterson, Reece L.

2010-01-01

The purpose of this document is to provide information and guidance for Nebraska School districts in creating new, or revising existing policies and procedures related to the use of physical restraint and seclusion in school settings. The goal is to create policies that are informed by national policy directions, research, good practice and…

Aeronautical engineering: A continuing bibliography with indexes (supplement 284)

NASA Technical Reports Server (NTRS)

1992-01-01

This bibliography lists 974 reports, articles, and other documents introduced into the NASA scientific and technical information system in Oct. 1992. The coverage includes documents on design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles.

Revision of ISO 15859 Aerospace Fluid Standards

NASA Technical Reports Server (NTRS)

Greene, Benjamin; McClure, Mark B.

2012-01-01

A detailed review of ISO 15859 "Space Systems - Fluid Characteristics, Sampling and Test Methods" was performed An approach to revising Parts 1-9 and 11-13 was developed and concurred by the NASA Technical Standards Program Office. The approach was to align them with the highest level source documents, and not to program-specific requirements. The updated documents were prepared and presented.

Nonparametric projections of forest and rangeland condition indicators: A technical document supporting the 2005 USDA Forest Service RPA Assessment Update

Treesearch

John Hof; Curtis Flather; Tony Baltic; Rudy King

2006-01-01

The 2005 Forest and Rangeland Condition Indicator Model is a set of classification trees for forest and rangeland condition indicators at the national scale. This report documents the development of the database and the nonparametric statistical estimation for this analytical structure, with emphasis on three special characteristics of condition indicator production...

Electronic Document Imaging and Optical Storage Systems for Local Governments: An Introduction. Local Government Records Technical Information Series. Number 21.

ERIC Educational Resources Information Center

Schwartz, Stanley F.

This publication introduces electronic document imaging systems and provides guidance for local governments in New York in deciding whether such systems should be adopted for their own records and information management purposes. It advises local governments on how to develop plans for using such technology by discussing its advantages and…

Exploring How Nigerian Women Foster Action to Be Taken to Involve More Women Participation in Technical and Vocational Education

ERIC Educational Resources Information Center

Akor, Robert; Bakar, Ab Rahim Bin; Hamzah, Azim B. Hj; Rashid, Abdullah Bin Mat

2015-01-01

Despite the documented benefits to economic and social development of women and the constitutional guarantee for equal right under the law to all citizens, the advancement of the status of women in Nigeria is still far from satisfactory. The participation of women in technical and vocational education is abysmally low. Recent literature describing…

Joint Technical Architecture for Robotic Systems (JTARS)-Final Report

NASA Technical Reports Server (NTRS)

Bradley, Arthur T.; Holloway, Sidney E., III

2006-01-01

This document represents the final report for the Joint Technical Architecture for Robotic Systems (JTARS) project, funded by the Office of Exploration as part of the Intramural Call for Proposals of 2005. The project was prematurely terminated, without review, as part of an agency-wide realignment towards the development of a Crew Exploration Vehicle (CEV) and meeting the near-term goals of lunar exploration.

DEVELOPMENT OF SAMPLING AND ANALYTICAL METHODS FOR THE MEASUREMENT OF NITROUS OXIDE FROM FOSSIL FUEL COMBUSTION SOURCES

EPA Science Inventory

The report documents the technical approach and results achieved while developing a grab sampling method and an automated, on-line gas chromatography method suitable to characterize nitrous oxide (N2O) emissions from fossil fuel combustion sources. The two methods developed have...

Civil and Environmental Engineering Development Office Fiscal Year 1979 Technical Objectives Document.

DTIC Science & Technology

1977-11-15

for the theater airbase, pavement studies, environmental pollution abatement and control, air mobility concepts, energy conservation, fire fighting equipment, air base support, and warm fog dispersal. (Author)

The Effects of Integrating On-Going Training for Technical Documentation Teams

ERIC Educational Resources Information Center

Catanio, Joseph T.; Catanio, Teri L.

2010-01-01

The tools and techniques utilized in the technical communications profession are constantly improving and changing. Information Technology (IT) organizations devote the necessary resources to equip and train engineering, marketing, and sales teams, but often fail to do so for technical documentation teams. Many IT organizations tend to view…

Technical Documentation and Legal Liability.

ERIC Educational Resources Information Center

Caher, John M.

1995-01-01

States that litigation over the interpretation and sufficiency of technical documentation is increasingly common as a number of suits have been filed in state and federal courts. Describes the case of "Martin versus Hacker," a recent case in which New York's highest court analyzed a technical writer's prose in the context of a lawsuit…

75 FR 19297 - Energy Conservation Program: Public Meeting and Availability of the Preliminary Technical Support...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-14

... Conservation Program: Public Meeting and Availability of the Preliminary Technical Support Document for Walk-In... and availability of the preliminary technical support document regarding energy conservation standards..., the deadline for requesting to speak at the public meeting, and the deadline for submitting written...

TECHNICAL RESOURCE DOCUMENT: TREATMENT TECHNOLOGIES FOR CORROSIVE-CONTAINING WASTES. VOLUME 2

EPA Science Inventory

The Technical Resource Document (TRD) for wastes containing corrosives is one in a series of five documents which evaluate waste management alternatives to land disposal. In addition to this TRD for corrosive wastes, the other four TRDs in the series address land disposal alterna...

AgRISTARS documents tracking list report

NASA Technical Reports Server (NTRS)

Hawkins, J. L.

1982-01-01

A quarterly listing of those documents and related publications that have been issued and placed in the AgRISTARS tracking system is presented. The Tracking List Report provides a catalog, by project, of technical publications arranged by type of document and gives the reference AgRISTARS document numbers, title and date of publication, the issuing organization, and the National Technical Information Service reference number.

Simulation As a Tool in Education Research and Development. A Technical Paper. EdTalk.

ERIC Educational Resources Information Center

Hood, Paul

This document introduces simulation as a field of endeavor that has great potential for education research, development, and training. Simulation allows education developers to explore, develop, and test new educational programs and practices before communities, educators, and students are asked to participate in them. Simulation technologies…

76 FR 38187 - International Conference on Harmonisation; Draft Guidance on Q11 Development and Manufacture of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-29

...The Food and Drug Administration (FDA) is announcing the availability of a draft guidance entitled ``Q11 Development and Manufacture of Drug Substances.'' The draft guidance was prepared under the auspices of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH). The draft guidance describes approaches to developing process and drug substance understanding and provides guidance on what information should be provided in certain sections of the Common Technical Document (CTD). The draft guidance is intended to harmonize the scientific and technical principles relating to the description and justification of the development and manufacturing process of drug substances (both chemical entities and biotechnological/biological entities) to enable a consistent approach for providing and evaluating this information across the three regions.

AgRISTARS: Foreign Commodity production forecasting. Project procedures designation and description document, volume 1

NASA Technical Reports Server (NTRS)

Waggoner, J. T.; Phinney, D. E. (Principal Investigator)

1981-01-01

The crop estimation analysis procedures documentation of the AgRISTARS - Foreign Commodity Production Forecasting Project (FCPF) is presented. Specifically it includes the technical/management documentation of the remote sensing data analysis procedures prepared in accordance with the guidelines provided in the FCPF communication/documentation standards manual. Standard documentation sets are given arranged by procedural type and level then by crop types or other technically differentiating categories.

Data development technical support document for the aircraft crash risk analysis methodology (ACRAM) standard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kimura, C.Y.; Glaser, R.E.; Mensing, R.W.

1996-08-01

The Aircraft Crash Risk Analysis Methodology (ACRAM) Panel has been formed by the US Department of Energy Office of Defense Programs (DOE/DP) for the purpose of developing a standard methodology for determining the risk from aircraft crashes onto DOE ground facilities. In order to accomplish this goal, the ACRAM panel has been divided into four teams, the data development team, the model evaluation team, the structural analysis team, and the consequence team. Each team, consisting of at least one member of the ACRAM plus additional DOE and DOE contractor personnel, specializes in the development of the methodology assigned to thatmore » team. This report documents the work performed by the data development team and provides the technical basis for the data used by the ACRAM Standard for determining the aircraft crash frequency. This report should be used to provide the generic data needed to calculate the aircraft crash frequency into the facility under consideration as part of the process for determining the aircraft crash risk to ground facilities as given by the DOE Standard Aircraft Crash Risk Assessment Methodology (ACRAM). Some broad guidance is presented on how to obtain the needed site-specific and facility specific data but this data is not provided by this document.« less

Aviation System Analysis Capability Executive Assistant Development

NASA Technical Reports Server (NTRS)

Roberts, Eileen; Villani, James A.; Anderson, Kevin; Book, Paul

1999-01-01

In this technical document, we describe the development of the Aviation System Analysis Capability (ASAC) Executive Assistant (EA) Proof of Concept (POC) and Beta version. We describe the genesis and role of the ASAC system, discuss the objectives of the ASAC system and provide an overview of components and models in the ASAC system, and describe the design process and the results of the ASAC EA POC and Beta system development. We also describe the evaluation process and results for applicable COTS software. The document has seven chapters, a bibliography, and two appendices.

ASAC Executive Assistant Architecture Description Summary

NASA Technical Reports Server (NTRS)

Roberts, Eileen; Villani, James A.

1997-01-01

In this technical document, we describe the system architecture developed for the Aviation System Analysis Capability (ASAC) Executive Assistant (EA). We describe the genesis and role of the ASAC system, discuss the objectives of the ASAC system and provide an overview of components and models within the ASAC system, discuss our choice for an architecture methodology, the Domain Specific Software Architecture (DSSA), and the DSSA approach to developing a system architecture, and describe the development process and the results of the ASAC EA system architecture. The document has six appendices.

DOE technical standards list: Department of Energy standards index

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This technical standards list (TSL) was prepared for use by personnel involved in the selection and use of US DOE technical standards and other government and non-government standards. This TSL provides listings of current DOE technical standards, non-government standards that have been adopted by DOE, other government documents in which DOE has a recorded interest, and cancelled DOE technical standards. Standards are indexed by type in the appendices to this document. Definitions of and general guidance for the use of standards are also provided.

Using Design Principles to Teach Technical Communication.

ERIC Educational Resources Information Center

Markel, Mike

1995-01-01

Compares the writing of two students--a competent writer and a weak one--in a technical communication course before and after discussion of design principles. Finds that a basic understanding of design principles helped them improve document macrostructure but had little effect on document microstructure. Suggests that integrating document design…

NASA STI Program Seminar: Electronic documents

NASA Technical Reports Server (NTRS)

1994-01-01

The theme of this NASA Scientific and Technical Information Program Seminar was electronic documents. Topics covered included Electronic Documents Management at the CASI, the Impact of Electronic Publishing on User Expectations and Searching Image Record Management, Secondary Publisher Considerations for Electronic Journal Literature, and the Technical Manual Publishing On Demand System (TMPODS).

UST CORRECTIVE ACTION TECHNOLOGIES: ENGINEERING DESIGN OF FREE PRODUCT RECOVERY SYSTEMS

EPA Science Inventory

The objective of this project was to develop a technical assistance document for assessment of subsurface hydrocarbon spills and for evaluating effects of well placement and pumping rates on separate phase plume control and on free product recovery. Procedures developed for estim...

Contextualizing Distributed Leadership in Higher Education

ERIC Educational Resources Information Center

Sewerin, Thomas; Holmberg, Robert

2017-01-01

This case study of development in a technical university situates distributed leadership in higher education in an organizational perspective. Analysis of documentation from development programs and interviews with 10 faculty members showed that leadership practices were related to different institutional logics prominent in four key activities in…

Evaluation Strategy. Paper Preservation Systems.

ERIC Educational Resources Information Center

FMC Corp., Gastonia, NC. Lithium Div.

After a decade of slow but steady progress, the pace of development of technologies to deacidify and strengthen deteriorating books and documents has quickened significantly. These developments accentuate the need for the conservation community to scientifically evaluate the technical merits of potential processes. This draft evaluation strategy…

Standards for Lithotripter Performance

NASA Astrophysics Data System (ADS)

Schultheiss, Reiner; Doerffel, Michael

2008-09-01

Standards for lithotripsy have been developed by the International Electrotechnical Commission (IEC) and the FDA. In addition to the existing regulations and norms for the manufacturers, special standards were developed to address a treatment method developed in the early 1980's using extracorporeal shock waves. Initially, the FDA regulated the premarket approval process for lithotripters as a Class III device but reclassified lithotripters in 2000 to a Class II device. The corresponding guidance document for showing the substantial equivalence of new devices with predicate devices will be described in detail. The FDA guidance document is very useful in helping device manufacturers: (i) develop technical performance testing for a shock wave lithotripter within the parameters of an FDA submission, and (ii) conduct clinical performance testing via at least one clinical confirmation study with a small number of subjects. Unfortunately although the submitted data are available at the FDA they are not available in the marketplace and this causes difficulties for physicians in deciding which device to use. The results of the technical performance testing of the LithoGold™ are provided.

Control technology appendices for pollution control technical manuals. Final report, June 1982-February 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1983-04-01

The document is one of six technical handbooks prepared by EPA to help government officials granting permits to build synfuels facilities, synfuels process developers, and other interested parties. They provide technical data on waste streams from synfuels facilities and technologies capable of controlling them. Process technologies covered in the manuals include coal gasification, coal liquefaction by direct and idirect processing, and the extraction of oil from shale. The manuals offer no regulatory guidance, allowing the industry flexibility in deciding how best to comply with environmental regulations.

Selecting a software development methodology. [of digital flight control systems

NASA Technical Reports Server (NTRS)

Jones, R. E.

1981-01-01

The state of the art analytical techniques for the development and verification of digital flight control software is studied and a practical designer oriented development and verification methodology is produced. The effectiveness of the analytic techniques chosen for the development and verification methodology are assessed both technically and financially. Technical assessments analyze the error preventing and detecting capabilities of the chosen technique in all of the pertinent software development phases. Financial assessments describe the cost impact of using the techniques, specifically, the cost of implementing and applying the techniques as well as the relizable cost savings. Both the technical and financial assessment are quantitative where possible. In the case of techniques which cannot be quantitatively assessed, qualitative judgements are expressed about the effectiveness and cost of the techniques. The reasons why quantitative assessments are not possible will be documented.

Aircraft/Air Traffic Management Functional Analysis Model: Technical Description. 2.0

NASA Technical Reports Server (NTRS)

Etheridge, Melvin; Plugge, Joana; Retina, Nusrat

1998-01-01

The Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 (FAM 2.0), is a discrete event simulation model designed to support analysis of alternative concepts in air traffic management and control. FAM 2.0 was developed by the Logistics Management Institute (LMI) under a National Aeronautics and Space Administration (NASA) contract. This document provides a technical description of FAM 2.0 and its computer files to enable the modeler and programmer to make enhancements or modifications to the model. Those interested in a guide for using the model in analysis should consult the companion document, Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 Users Manual.

Monitored Geologic Repository Project Description Document

DOE Office of Scientific and Technical Information (OSTI.GOV)

P. M. Curry

2001-01-30

The primary objective of the Monitored Geologic Repository Project Description Document (PDD) is to allocate the functions, requirements, and assumptions to the systems at Level 5 of the Civilian Radioactive Waste Management System (CRWMS) architecture identified in Section 4. It provides traceability of the requirements to those contained in Section 3 of the ''Monitored Geologic Repository Requirements Document'' (MGR RD) (YMP 2000a) and other higher-level requirements documents. In addition, the PDD allocates design related assumptions to work products of non-design organizations. The document provides Monitored Geologic Repository (MGR) technical requirements in support of design and performance assessment in preparing formore » the Site Recommendation (SR) and License Application (LA) milestones. The technical requirements documented in the PDD are to be captured in the System Description Documents (SDDs) which address each of the systems at Level 5 of the CRWMS architecture. The design engineers obtain the technical requirements from the SDDs and by reference from the SDDs to the PDD. The design organizations and other organizations will obtain design related assumptions directly from the PDD. These organizations may establish additional assumptions for their individual activities, but such assumptions are not to conflict with the assumptions in the PDD. The PDD will serve as the primary link between the technical requirements captured in the SDDs and the design requirements captured in US Department of Energy (DOE) documents. The approved PDD is placed under Level 3 baseline control by the CRWMS Management and Operating Contractor (M and O) and the following portions of the PDD constitute the Technical Design Baseline for the MGR: the design characteristics listed in Table 1-1, the MGR Architecture (Section 4.1), the Technical Requirements (Section 5), and the Controlled Project Assumptions (Section 6).« less

Proactive Response to Potential Material Shortages Arising from Environmental Restrictions Using Automatic Discovery and Extraction of Information from Technical Documents

DTIC Science & Technology

2012-12-21

material data and other key information in a UIMA environment. In the course of this project, the tools and methods developed were used to extract and...Architecture ( UIMA ) library from the Apache Software Foundation. Using this architecture, a given document is run through several “annotators” to...material taxonomy developed for the XSB, Inc. Coherent View™ database. In order to integrate this technology into the Java-based UIMA annotation

Technical basis for implementation of remote reading capabilities for radiological control instruments at tank farms

DOE Office of Scientific and Technical Information (OSTI.GOV)

PIERSON, R.M.

1999-10-27

This document provides the technical basis for use of remote reading capabilities with radiological control instruments at River Protection Project facilities. The purpose of this document is to evaluate applications of remote reading capabilities with Radiological Control instrumentation to allow continuous monitoring of radiation dose rates at River Protection Project (RPP) facilities. In addition this document provides a technical basis and implementing guidelines for remote monitoring of dose rates and their potential contribution to maintaining radiation exposures ALARA.

Instrument and Survey Analysis Technical Report: Program Implementation Survey. Technical Report #1112

ERIC Educational Resources Information Center

Alonzo, Julie; Tindal, Gerald

2011-01-01

This technical document provides guidance to educators on the creation and interpretation of survey instruments, particularly as they relate to an analysis of program implementation. Illustrative examples are drawn from a survey of educators related to the use of the easyCBM learning system. This document includes specific sections on…

User Problems Associated with the Services of Federal and Quasi-Federal Technical Information Producing Agencies.

ERIC Educational Resources Information Center

Los Angeles Regional Technical Information Users Council, CA.

Nine reports of the Los Angeles Regional Technical Information Users Council, which identify and discuss user problem areas and recommend solutions, comprise this document. The topics of the reports are: (1) Air Force Technical Objective Document Release Program (AFTOD); (2) Army Qualitative Requirements Information Program (QDRI); (3)…

48 CFR 801.602-82 - Documents to submit for legal or technical review-general.

Code of Federal Regulations, 2010 CFR

2010-10-01

... legal or technical review-general. 801.602-82 Section 801.602-82 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS GENERAL DEPARTMENT OF VETERANS AFFAIRS ACQUISITION REGULATION SYSTEM Career... review—general. Table 801.602-82 specifies the documents that must be submitted when a legal or technical...

Pilot production system cost/benefit analysis: Digital document storage project

NASA Technical Reports Server (NTRS)

1989-01-01

The Digital Document Storage (DDS)/Pilot Production System (PPS) will provide cost effective electronic document storage, retrieval, hard copy reproduction, and remote access for users of NASA Technical Reports. The DDS/PPS will result in major benefits, such as improved document reproduction quality within a shorter time frame than is currently possible. In addition, the DDS/PPS will provide an important strategic value through the construction of a digital document archive. It is highly recommended that NASA proceed with the DDS Prototype System and a rapid prototyping development methodology in order to validate recent working assumptions upon which the success of the DDS/PPS is dependent.

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Groves, Paula; Valett, Jon

1990-01-01

An annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory is given. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: the Software Engineering Laboratory; the Software Engineering Laboratory-software development documents; software tools; software models; software measurement; technology evaluations; Ada technology; and data collection. Subject and author indexes further classify these documents by specific topic and individual author.

Data Quality Objectives for Tank Farms Waste Compatibility Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

BANNING, D.L.

1999-07-02

There are 177 waste storage tanks containing over 210,000 m{sup 3} (55 million gal) of mixed waste at the Hanford Site. The River Protection Project (RPP) has adopted the data quality objective (DQO) process used by the U.S. Environmental Protection Agency (EPA) (EPA 1994a) and implemented by RPP internal procedure (Banning 1999a) to identify the information and data needed to address safety issues. This DQO document is based on several documents that provide the technical basis for inputs and decision/action levels used to develop the decision rules that evaluate the transfer of wastes. A number of these documents are presentlymore » in the process of being revised. This document will need to be revised if there are changes to the technical criteria in these supporting documents. This DQO process supports various documents, such as sampling and analysis plans and double-shell tank (DST) waste analysis plans. This document identifies the type, quality, and quantity of data needed to determine whether transfer of supernatant can be performed safely. The requirements in this document are designed to prevent the mixing of incompatible waste as defined in Washington Administrative Code (WAC) 173-303-040. Waste transfers which meet the requirements contained in this document and the Double-Shell Tank Waste Analysis Plan (Mulkey 1998) are considered to be compatible, and prevent the mixing of incompatible waste.« less

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Kistler, David; Bristow, John; Smith, Don

1994-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. Nearly 200 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) The Software Engineering Laboratory; (2) The Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

Establishing Transportation Framework Services Using the Open Geospatial Consortium Web Feature Service Specification

NASA Astrophysics Data System (ADS)

Yang, C.; Wong, D. W.; Phillips, T.; Wright, R. A.; Lindsey, S.; Kafatos, M.

2005-12-01

As a teamed partnership of the Center for Earth Observing and Space Research (CEOSR) at George Mason University (GMU), Virginia Department of Transportation (VDOT), Bureau of Transportation Statistics at the Department of Transportation (BTS/DOT), and Intergraph, we established Transportation Framework Data Services using Open Geospatial Consortium (OGC)'s Web Feature Service (WFS) Specification to enable the sharing of transportation data among the federal level with data from BTS/DOT, the state level through VDOT, the industries through Intergraph. CEOSR develops WFS solutions using Intergraph software. Relevant technical documents are also developed and disseminated through the partners. The WFS is integrated with operational geospatial systems at CEOSR and VDOT. CEOSR works with Intergraph on developing WFS solutions and technical documents. GeoMedia WebMap WFS toolkit is used with software and technical support from Intergraph. ESRI ArcIMS WFS connector is used with GMU's campus license of ESRI products. Tested solutions are integrated with framework data service operational systems, including 1) CEOSR's interoperable geospatial information services, FGDC clearinghouse Node, Geospatial One Stop (GOS) portal, and WMS services, 2) VDOT's state transportation data and GIS infrastructure, and 3)BTS/DOT's national transportation data. The project presents: 1) develop and deploy an operational OGC WFS 1.1 interfaces at CEOSR for registering with FGDC/GOS Portal and responding to Web ``POST'' requests for transportation Framework data as listed in Table 1; 2) build the WFS service that can return the data that conform to the drafted ANSI/INCITS L1 Standard (when available) for each identified theme in the format given by OGC Geography Markup Language (GML) Version 3.0 or higher; 3) integrate the OGC WFS with CEOSR's clearinghouse nodes, 4) establish a formal partnership to develop and share WFS-based geospatial interoperability technology among GMU, VDOT, BTS/DOT, and Intergraph; and 5) develop WFS-based solutions and technical documents using the GeoMedia WebMap WFS toolkit. Geospatial Web Feature Service is demonstrated to be more efficient in sharing vector data and supports direct Internet access transportation data. Developed WFS solutions also enhanced the interoperable service provided by CEOSR through the FGDC clearinghouse node and the GOS Portal.

Technical Objective Document. Fiscal Year 1989

DTIC Science & Technology

1987-12-01

other special interest areas/technologies; and throuch a " delphi " process with the Center Technical Investment Committee *develop a "puts and takes...radar and larce optical systems in space, the detection and trackina of low observables, and the operation of sensors for tracking objects in space for...for reducing the processing time for adaptive beamforming in receive arrays, self-coherina techniques in larce distributed arrays and array self

Vision for the Year 2002: A Working Document. Salem County Board for Vocational Education Strategic Plan for the Salem County Vocational Technical Schools.

ERIC Educational Resources Information Center

Salem County Board for Vocational Education, Woodstown, NJ.

A strategic plan for vocational-technical education (VTE) in Salem County, New Jersey, in the year 2002 was developed by the county board of VTE and county advisory board with input from students, parents, employers, elected officials, and the community in general. Six strategic planning subcommittees were formed to review the district's VTE…

Alternative Feedstocks Program Technical and Economic Assessment: Thermal/Chemical and Bioprocessing Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bozell, J. J.; Landucci, R.

This resource document on biomass to chemicals opportunities describes the development of a technical and market rationale for incorporating renewable feedstocks into the chemical industry in both a qualitative and quantitative sense. The term "renewable feedstock?s" can be defined to include a huge number of materials such as agricultural crops rich in starch, lignocellulosic materials (biomass), or biomass material recovered from a variety of processing wastes.

Models for Strategic Program Development. Proceedings of the Annual Meeting of the Council for Programs in Technical and Scientific Communication (27th, Menomonie, Wisconsin, October 19-21, 2000).

ERIC Educational Resources Information Center

Maylath, Bruce, Ed.

This document presents 48 papers delivered at the 2000 annual meeting of the Council for Programs in Technical and Scientific Communication (CPTSC). Papers in the proceedings are divided into 14 subsections: (1) Keynote Presentation: "Global Classroom Project (T. K. Herrington); (2) Opening Session Address: "What Industry Looks for in…

Aeronautical engineering: A continuing bibliography with indexes (supplement 282)

NASA Technical Reports Server (NTRS)

1992-01-01

This bibliography lists 623 reports, articles, and other documents introduced into the NASA scientific and technical information system in Aug. 1992. The coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles.

Aeronautical Engineering: A Continuing Bibliography with Indexes

NASA Technical Reports Server (NTRS)

1995-01-01

This bibliography lists 193 reports, journal articles, and other documents introduced in the NASA scientific and technical system in Aug. 1995. Subject coverage includes documents on the engineering and theoretical aspects of design, construction, evaluation, testing, operation, and performance of aircraft (including aircraft engines) and associated components, equipment, and systems. It also includes research and development in aerodynamics, aeronautics, and ground support equipment for aeronautical vehicles

The Water Framework Directive: The Challenges of Testing and Validation of Guidance Documents

NASA Astrophysics Data System (ADS)

Barth, F.; Bidoglio, G.; Murray, C. N.; Zaldivar, J.; Bouraoui, F.

On the 23rd October 2000 the European Parliament and Council passed a Directive establishing a framework of community action in the field of water policy (Water Framework Directive- FWD). The Water Framework Directive (FWD) raises major challenges, these include an extremely demanding timetable, in particular in the nine preparatory years; the complexity of the text and the diversity of possible solutions to scientific, technical and practical questions. A further problem is that a common understanding and methodologies for the application of the different areas of the FWD do not necessarily exist. Member States have, historically, developed approaches to monitoring, impact assessment, economic analysis etc. that will need to be compared in order to be certain that they provide comparable level of results over the range of ecosystems covered in the European Union. Accession Countries will also have to start to adjust their environmental legislation to be compatible with EU Directives and standards. The Framework Water Directive imposes a series of deadlines for the reporting by Member States to the European Commission. In order to respond to this problem a Common Strategy on the Implementation of the Water Framework Directive is being developed by the European Commission and Member States. The aim of the development of this Common Strategy is to allow, as far as possible, a coherent and harmonious implementation of the Directive. Focus is on methodological questions related to a common understanding of the technical and scientific implications of the Directive. The aim is to clarify and develop, where appropriate, supporting technical and scientific information to assist in the practical implementation of the Directive. Guidance documents, advice for operational methods and other supporting documents will be developed for this purpose. A modular structure has been chosen for the overall strategy. The main modules are the key activities for the implementation process.. · Activity 1: Information sharing · Activity 2: Develop guidance on technical issues · Activity 3: Information and data management · Activity 4: Application, testing and validation The first three priorities have a more horizontal character. They are the key activities for developing a common understanding of the implementation of the Water Framework Directive. All these horizontal activities need to be integrated and made operational in the River Basin Management Plans. Activity 4 (Application, Testing and Validation) significantly contributes to this integration role by making these activities operational in the River Basin Management Plans. The integration step is crucial for the effective implementation of the WFD. The objective of Activity 4 is to ensure coherence amongst the different guidance documents and their cross applicability by testing the guidance documents in selected pilot river basins. To achieve these objectives a Network of pilot river basins and associated coastal zones (where applicable) will be identified, in close co- operation with WGs in Key Action 2, that are considered to represent a range of problems and conditions characteristic of those to be found in the application of the different guidelines. The Network of identified sites will used for testing and cross- validation of proposed WG guidelines. The Joint Research Centre is acting as the technical secretariat for the Scientific Coordination Committee who is responsible for Activity 4. The purpose of the present paper is to describe approach, methodology and timetable for integrated testing of guidance documents.

ITS deployment guidance for transit systems : technical edition

DOT National Transportation Integrated Search

1997-04-01

This document provides guidance for the transit community on developing and implementing Intelligent Transportation Systems (ITS) and using the National ITS Architecture. It is written specifically for the transit community and focuses on transit app...

Technicians, Technical Education, and Global Economic Development: A Cross National Examination.

ERIC Educational Resources Information Center

Honig, Benson; Ramirez, Francisco

Although the relationship among education, science, technology, and economic development is nearly universally accepted, the link among education, infrastructure, and economic growth has yet to be empirically demonstrated. A multivariate analysis of cross-national data regarding 48 countries was performed to document relationships between…

Development of performance-based guidelines for selection of bituminous-based hot-poured pavement crack sealant : an executive summary report.

DOT National Transportation Integrated Search

2009-01-01

This report summarizes research presented in separate technical reports, papers, and journal articles that collectively document the development of a systematic process to aid in the selection of appropriate bituminous hot-poured sealants for pavemen...

DEVELOPMENT AND AVAILABILITY OF EQUILIBRIUM PARTITIONING SEDIMENT GUIDELINES (ESGS) FOR NONIONIC ORGANIC CONTAMINANTS, METALS MIXTURES, AND POLYCYCLIC AROMATIC HYDROCARBON (PAH) MIXTURES

EPA Science Inventory

Collaborative efforts between EPA's Office of Water and Office of Research and Development have resulted in the development of sediment guidelines based on equilibrium partitioning theory (EqP). The guidance available includes a technical support document, describing the derivat...

Waukesha County Technical College Budget Document, Fiscal Year 2000-2001.

ERIC Educational Resources Information Center

Waukesha County Technical Coll., Pewaukee, WI.

This report presents Waukesha County Area Technical College District's (Wisconsin) fiscal year 2000-2001 budget document. It contains the following sections: table of contents; a reader's guide to the budget document; a quick reference guide; an introduction section, which contains a transmittal letter, a budget message for 2000-2001 combining…

Guide to solar reference spectra and irradiance models

NASA Astrophysics Data System (ADS)

Tobiska, W. Kent

The international standard for determining solar irradiances was published by the International Standards Organization (ISO) in May 2007. The document, ISO 21348 Space Environment (natural and artificial) - Process for determining solar irradiances, describes the process for representing solar irradiances. We report on the next progression of standards work, i.e., the development of a guide that identifies solar reference spectra and irradiance models for use in engineering design or scientific research. This document will be produced as an AIAA Guideline and ISO Technical Report. It will describe the content of the reference spectra and models, uncertainties and limitations, technical basis, data bases from which the reference spectra and models are formed, publication references, and sources of computer code for reference spectra and solar irradiance models, including those which provide spectrally-resolved lines as well as solar indices and proxies and which are generally recognized in the solar sciences. The document is intended to assist aircraft and space vehicle designers and developers, heliophysicists, geophysicists, aeronomers, meteorologists, and climatologists in understanding available models, comparing sources of data, and interpreting engineering and scientific results based on different solar reference spectra and irradiance models.

2005 v4.2 Technical Support Document

EPA Pesticide Factsheets

Technical Support Document for the Final Transport Rule describes how updated 2005 NEI, version 2 emissions and were processed for air quality modeling in support of the Cross-state Air Pollution Rule (CSAPR).

Book Out! An Inventory Story

NASA Technical Reports Server (NTRS)

Panait, Claudia M.

2004-01-01

The NASA Glenn Library is a science and engineering research library providing the most current books, journals, CD-ROM's and documents to support the study of aeronautics, space propulsion and power, communications technology, materials and structures and microgravity science. The GRC technical library also supports the research and development efforts of all scientists and engineers on site via full text electronic files, literature searching, technical reports, etc. As an intern in the NASA Glenn Library, I attempt to support these objectives through efficiently and effectively fulfilling the assignment that was given to me. The assignment that was relegated to me was to catalog National Advisory Committee for Aeronautics, NASA Technical Documents into NASA Galaxie. This process consists of holdings being added to existing Galaxie records, upgrades and editing done to the bibliographic records when needed, adding URL's into Galaxie when they were missing from the record. NASA ASAP and Digidoc was used to locate URL's of PDF's that were not in Galaxie. A spreadsheet of documents with no URL's were maintained. Also, a subject channel of web, fill-text, paid and free, journal and other subject specific pages were developed and expanded fiom current content of intranet pages. To expand upon the second half of my assignment, I was given the project of taking inventory of the library s book collection. I kept record of the books that were not accounted for on a master list I was given to work fiom and submitted them for correction and addition. I also made sure the books were placed in the appropriate order and made corrections to any discrepancies that existed between the master list and what was on the shelf. Upon completion of this assignment, I will have verified that 21,113 books were in the correct location, order and have the correct corresponding serial number and barcode. In conclusion, as of this date I have input around 750 documents into NASA Galaxie, inputting about half of the NASA Technical Documents into the system. The rest of my tenure in this program will consist of finishing the other half of the reports. In regard to the second assignment, I still have about three-quarters of the collection to record and correct.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Malkoske, Kyle; Nielsen, Michelle; Brown, Erika

The Canadian Partnership for Quality Radiotherapy (CPQR) and the Canadian Organization of Medical Physicist’s (COMP) Quality Assurance and Radiation Safety Advisory Committee (QARSAC) have worked together in the development of a suite of Technical Quality Control (TQC) Guidelines for radiation treatment equipment and technologies, that outline specific performance objectives and criteria that equipment should meet in order to assure an acceptable level of radiation treatment quality. Early community engagement and uptake survey data showed 70% of Canadian centers are part of this process and that the data in the guideline documents reflect, and are influencing the way Canadian radiation treatmentmore » centres run their technical quality control programs. As the TQC development framework matured as a cross-country initiative, guidance documents have been developed in many clinical technologies. Recently, there have been new TQC documents initiated for Gamma Knife and Cyberknife technologies where the entire communities within Canada are involved in the review process. At the same time, QARSAC reviewed the suite as a whole for the first time and it was found that some tests and tolerances overlapped across multiple documents as single tests could pertain to multiple quality control areas. The work to streamline the entire suite has allowed for improved usability of the suite while keeping the integrity of single quality control areas. The suite will be published by the JACMP, in the coming year.« less

Loads and Structural Dynamics Requirements for Spaceflight Hardware

NASA Technical Reports Server (NTRS)

Schultz, Kenneth P.

2011-01-01

The purpose of this document is to establish requirements relating to the loads and structural dynamics technical discipline for NASA and commercial spaceflight launch vehicle and spacecraft hardware. Requirements are defined for the development of structural design loads and recommendations regarding methodologies and practices for the conduct of load analyses are provided. As such, this document represents an implementation of NASA STD-5002. Requirements are also defined for structural mathematical model development and verification to ensure sufficient accuracy of predicted responses. Finally, requirements for model/data delivery and exchange are specified to facilitate interactions between Launch Vehicle Providers (LVPs), Spacecraft Providers (SCPs), and the NASA Technical Authority (TA) providing insight/oversight and serving in the Independent Verification and Validation role. In addition to the analysis-related requirements described above, a set of requirements are established concerning coupling phenomena or other interaction between structural dynamics and aerodynamic environments or control or propulsion system elements. Such requirements may reasonably be considered structure or control system design criteria, since good engineering practice dictates consideration of and/or elimination of the identified conditions in the development of those subsystems. The requirements are included here, however, to ensure that such considerations are captured in the design space for launch vehicles (LV), spacecraft (SC) and the Launch Abort Vehicle (LAV). The requirements in this document are focused on analyses to be performed to develop data needed to support structural verification. As described in JSC 65828, Structural Design Requirements and Factors of Safety for Spaceflight Hardware, implementation of the structural verification requirements is expected to be described in a Structural Verification Plan (SVP), which should describe the verification of each structural item for the applicable requirements. The requirement for and expected contents of the SVP are defined in JSC 65828. The SVP may also document unique verifications that meet or exceed these requirements with Technical Authority approval.

Extensible Markup Language: How Might It Alter the Software Documentation Process and the Role of the Technical Communicator?

ERIC Educational Resources Information Center

Battalio, John T.

2002-01-01

Describes the influence that Extensible Markup Language (XML) will have on the software documentation process and subsequently on the curricula of advanced undergraduate and master's programs in technical communication. Recommends how curricula of advanced undergraduate and master's programs in technical communication ought to change in order to…

Definition of technology development missions for early Space Station satellite servicing. Volume 2: Technical

NASA Technical Reports Server (NTRS)

Cable, D. A.; Diewald, C. A.; Hills, T. C.; Parmentier, T. J.; Spencer, R. A.; Stone, G. E.

1984-01-01

Volume 2 contains the Technical Report of the approach and results of the Phase 2 study. The phase 2 servicing study was initiated in June 1983, and is being reported in this document. The scope of the contract was to: (1) define in detail five selected technology development missions (TDM); (2) conduct a design requirement analysis to refine definitions of satellite servicing requirements at the space station; and (3) develop a technology plan that would identify and schedule prerequisite precursor technology development, associated. STS flight experiments and space station experiments needed to provide onorbit validation of the evolving technology.

Creating an Environmental Justice Framework for Policy Change in Childhood Asthma: A Grassroots to Treetops Approach

PubMed Central

Sargent, Katherine; Arons, Abigail; Standish, Marion; Brindis, Claire D.

2011-01-01

Objectives. The Community Action to Fight Asthma Initiative, a network of coalitions and technical assistance providers in California, employed an environmental justice approach to reduce risk factors for asthma in school-aged children. Policy advocacy focused on housing, schools, and outdoor air quality. Technical assistance partners from environmental science, policy advocacy, asthma prevention, and media assisted in advocacy. An evaluation team assessed progress and outcomes. Methods. A theory of change and corresponding logic model were used to document coalition development and successes. Site visits, surveys, policymaker interviews, and participation in meetings documented the processes and outcomes. Quantitative and qualitative data were analyzed to assess strategies, successes, and challenges. Results. Coalitions, working with community residents and technical assistance experts, successfully advocated for policies to reduce children's exposures to environmental triggers, particularly in low-income communities and communities of color. Policies were implemented at various levels. Conclusions. Environmental justice approaches to policy advocacy could be an effective strategy to address inequities across communities. Strong technical assistance, close community involvement, and multilevel strategies were all essential to effective policies to reduce environmental inequities. PMID:21836108

An MBSE Approach to Space Suit Development

NASA Technical Reports Server (NTRS)

Cordova, Lauren; Kovich, Christine; Sargusingh, Miriam

2012-01-01

The EVA/Space Suit Development Office (ESSD) Systems Engineering and Integration (SE&I) team has utilized MBSE in multiple programs. After developing operational and architectural models, the MBSE framework was expanded to link the requirements space to the system models through functional analysis and interfaces definitions. By documenting all the connections within the technical baseline, ESSD experienced significant efficiency improvements in analysis and identification of change impacts. One of the biggest challenges presented to the MBSE structure was a program transition and restructuring effort, which was completed successfully in 4 months culminating in the approval of a new EVA Technical Baseline. During this time three requirements sets spanning multiple DRMs were streamlined into one NASA-owned Systems Requirement Document (SRD) that successfully identified requirements relevant to the current hardware development effort while remaining extensible to support future hardware developments. A capability-based hierarchy was established to provide a more flexible framework for future space suit development that can support multiple programs with minimal rework of basic EVA/Space Suit requirements. This MBSE approach was most recently applied for generation of an EMU Demonstrator technical baseline being developed for an ISS DTO. The relatively quick turnaround of operational concepts, architecture definition, and requirements for this new suit development has allowed us to test and evolve the MBSE process and framework in an extremely different setting while still offering extensibility and traceability throughout ESSD projects. The ESSD MBSE framework continues to be evolved in order to support integration of all products associated with the SE&I engine.

TECHNICAL GUIDANCE DOCUMENT: THE FABRICATION OF POLYETHYLENE FML FIELD SEAMS

EPA Science Inventory

This technical guidance document is meant to augment the numerous construction quality control and construction assurance (CQC and CQA) guidelines that are presently available for high density polyethylene (HDPE) liner installation and inspection.

Development of new precipitation frequency tables for counties in Kansas using NOAA Atlas 14 : [technical summary].

DOT National Transportation Integrated Search

2014-12-01

This report documents the development of KDOTs new rainfall tables for counties in : Kansas based on NOAA Atlas 14 Volume 8. These new tables provide rainfall depths : and intensities for durations from 5 minutes to 24 hours and recurrence interva...

The Development of TAFE in Australia. 3rd Edition.

ERIC Educational Resources Information Center

Goozee, Gillian

This document traces the development of Australia's technical and further education (TAFE) system, which offers a wide range of courses providing education and training for employment at the operative, trade, and paraprofessional levels, as well as general education and literacy programs. The following are among the topics discussed: (1) general…

77 FR 19678 - Cooperative Research and Development Agreement: Asset Tracking and Reporting Technology

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-02

... Cooperative Research and Development Agreement (CRADA) with General Dynamics C4 Systems, Inc. (General Dynamics), to test, evaluate, and document the strengths and weaknesses of at least one technical approach... Guard is currently considering partnering with General Dynamics, we are soliciting public comment on the...

Sex Equity: Recruitment and Retention of Non-Traditional Students.

ERIC Educational Resources Information Center

Mewhorter, V. Carolyn

This document contains the materials required to present two courses that were developed during a project to increase the recruitment/retention of women in technical education programs. Presented first is Developing Mechanical/Electrical Aptitude, a 30-hour course to improve students' (primarily women's) mechanical and electrical aptitude and…

Quantitative Comparisons to Promote Inquiry in the Introductory Physics Lab

ERIC Educational Resources Information Center

Holmes, N. G.; Bonn, D. A.

2015-01-01

In a recent report, the American Association of Physics Teachers has developed an updated set of recommendations for curriculum of undergraduate physics labs. This document focuses on six major themes: constructing knowledge, modeling, designing experiments, developing technical and practical laboratory skills, analyzing and visualizing data, and…

Methods to Develop Inhalation Cancer Risk Estimates for Chromium and Nickel Compounds

EPA Science Inventory

This document summarizes the approaches and rationale for the technical and scientific considerations used to derive inhalation cancer risks for emissions of chromium and nickel compounds from electric utility steam generating units.

Technical Support Document: Development of the Advanced Energy Design Guide for Large Hospitals - 50% Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonnema, E.; Leach, M.; Pless, S.

2013-06-01

This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Large Hospitals: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-LH) ASHRAE et al. (2011b). The AEDG-LH is intended to provide recommendations for achieving 50% whole-building energy savings in large hospitals over levels achieved by following Standard 90.1-2004. The AEDG-LH was created for a 'standard' mid- to large-size hospital, typically at least 100,000 ft2, but the strategies apply to all sizes and classifications of new construction hospital buildings. Its primary focus is new construction, but recommendations may be applicablemore » to facilities undergoing total renovation, and in part to many other hospital renovation, addition, remodeling, and modernization projects (including changes to one or more systems in existing buildings).« less

Configuration management plan for waste tank farms and the 242-A evaporator of tank waste remediation system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laney, T.

The configuration management architecture presented in this Configuration Management Plan is based on the functional model established by DOE-STD-1073-93, ``Guide for Operational Configuration Management Program.`` The DOE Standard defines the configuration management program by the five basic program elements of ``program management,`` ``design requirements,`` ``document control,`` ``change control,`` and ``assessments,`` and the two adjunct recovery programs of ``design reconstitution,`` and ``material condition and aging management.`` The CM model of five elements and two adjunct programs strengthen the necessary technical and administrative control to establish and maintain a consistent technical relationship among the requirements, physical configuration, and documentation. Although the DOEmore » Standard was originally developed for the operational phase of nuclear facilities, this plan has the flexibility to be adapted and applied to all life-cycle phases of both nuclear and non-nuclear facilities. The configuration management criteria presented in this plan endorses the DOE Standard and has been tailored specifically to address the technical relationship of requirements, physical configuration, and documentation during the full life cycle of the Waste Tank Farms and 242-A Evaporator of Tank Waste Remediation System.« less

NASA Langley Systems Analysis & Concepts Directorate Technology Assessment/Portfolio Analysis

NASA Technical Reports Server (NTRS)

Cavanaugh, Stephen; Chytka, Trina; Arcara, Phil; Jones, Sharon; Stanley, Doug; Wilhite, Alan W.

2006-01-01

Systems analysis develops and documents candidate mission and architectures, associated system concepts, enabling capabilities and investment strategies to achieve NASA s strategic objectives. The technology assessment process connects the mission and architectures to the investment strategies. In order to successfully implement a technology assessment, there is a need to collect, manipulate, analyze, document, and disseminate technology-related information. Information must be collected and organized on the wide variety of potentially applicable technologies, including: previous research results, key technical parameters and characteristics, technology readiness levels, relationships to other technologies, costs, and potential barriers and risks. This information must be manipulated to facilitate planning and documentation. An assessment is included of the programmatic and technical risks associated with each technology task as well as potential risk mitigation plans. Risks are assessed and tracked in terms of likelihood of the risk occurring and consequences of the risk if it does occur. The risk assessments take into account cost, schedule, and technical risk dimensions. Assessment data must be simplified for presentation to decision makers. The Systems Analysis and Concepts Directorate (SACD) at NASA Langley Research Center has a wealth of experience in performing Technology Assessment and Portfolio Analysis as this has been a business line since 1978.

Technical Assistance and Training from the Document Design Project. Final Report.

ERIC Educational Resources Information Center

American Institutes for Research, Washington, DC.

Contained in this report is a description of the technical assistance and training phase of the Document Design Project, a program funded by the National Institute of Education and intended to address and correct the readability problems posed by public documents. The first section of the report provides background material on the assistance and…

National Training Center (NTC) Analysis

DTIC Science & Technology

1981-05-29

CONTRACT FOR S100K NTC CONCEPT STUDY PRESENTATION TO DARPA/TRADOC SIOOK ADD- ON FOR FURTHER NTC CONCEPT DEVELOPMENT SAI CONCEPT FOR 1-ALPHA...Technical Report 29 May 1981 I I I This document is submitted in fulfillment of contract No. DAAK 40-78-C-0198. It is the final report on Phase 1...many technical reports have been published previously. This report draws on these earlier reports and presents a comprehensive summary and overview

Implementation Guidance Document: Properties and Types of Significant Photothermal Retinal Lesion Injuries

DTIC Science & Technology

2017-04-17

if ii does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ORGANIZATION. 1. REPORT DATE (DD-MM-YYYY) 12...NUMBER Risk of Significant Injury Technical Working Group : Wesley Burgei, Shannon Foley, Matt Pandullo, Melissa Nass-Flores, George L. Fischer, Hugh...14. ABSTRACT The RSI Technical Working Group (TWG) developed a recommendation defining the properties and types of significant photothennal retinal

MATILDA Version 2: Rough Earth TIALD Model for Laser Probabilistic Risk Assessment in Hilly Terrain - Part I

DTIC Science & Technology

2017-03-13

support of airborne laser designator use during test and training exercises on military ranges. The initial MATILDA tool, MATILDA PRO Version-1.6.1...was based on the 2007 PRA model developed to perform range safety clearances for the UK Thermal Imaging Airborne Laser Designator (TIALD) system...AFRL Technical Reports. This Technical Report, designated Part I, con- tains documentation of the computational procedures for probabilistic fault

Content of system design descriptions

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

A System Design Description (SDD) describes the requirements and features of a system. This standard provides guidance on the expected technical content of SDDs. The need for such a standard was recognized during efforts to develop SDDs for safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Existing guidance related to the corresponding documents in other industries is generally not suitable to meet the needs of DOE nuclear facilities. Across the DOE complex, different contractors have guidance documents, but they vary widely from site to site. While such guidance documents are valuable, no single guidance document has all themore » attributes that DOE considers important, including a reasonable degree of consistency or standardization. This standard is a consolidation of the best of the existing guidance. This standard has been developed with a technical content and level of detail intended to be most applicable to safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Notwithstanding that primary intent, this standard is recommended for other systems at such facilities, especially those that are important to achieving the programmatic mission of the facility. In addition, application of this standard should be considered for systems at other facilities, including non-nuclear facilities, on the basis that SDDs may be beneficial and cost-effective.« less

Strategic Mobility 21 Technical Plan

DTIC Science & Technology

2006-09-06

or grant. b. Technical documents with this statement may be made available or sold to the public and foreign nationals, companies, and governments ...including adversary governments , and may be exported. c. This statement may not be used on technical documents that formerly were classified...Transportation Technologies (CCDOTT), a government -industry academic collaborative enterprise. 2 Dual-use technology serves as a basis for both

Writing Clinic for Business and Technical Writers.

ERIC Educational Resources Information Center

Mercer County Community Coll., Trenton, NJ.

This document offers brief lesson plans for four courses: (1) an 8-hour refresher course for employees who write memos, short reports, and letters; (2) an 8-hour refresher course on creating a short document; (3) a 16-hour course on technical manual writing; and (4) an 8-hour course on technical manual writing. The courses were part of a workplace…

A WET TALE: TOXICITY OF COMPLEX EFFLUENTS

EPA Science Inventory

This course covers standards, regulations, policy, guidance and technical aspects of implementing the whole effluent toxicity program. The curriculum incorporates rationale and information on WET test requirements from USEPA documents, such as the Technical Support Document for W...

2005 v4.3 Technical Support Document

EPA Pesticide Factsheets

Emissions Modeling for the Final Mercury and Air Toxics Standards Technical Support Document describes how updated 2005 NEI, version 2 emissions were processed for air quality modeling in support of the final Mercury and Air Toxics Standards (MATS).

Reader-Centered Technical Writing

NASA Astrophysics Data System (ADS)

Narayanan, M.

2012-12-01

Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into an old schema. This reinforces basic engineering and mathematical design concepts. Accommodation: Here, it may work in a different manner. Writers may have to accommodate an old schema to a new object. This helps engineers to focus more on applications. Adaptation: Assimilation and accommodation are the two sides of adaptation, Jean Piaget's term for what most of us would call learning. Mathematical design concepts generated by students should be suitable for creative engineering applications. References : Phillips, D. C. and Soltis, Jonas F. (2003) "Piagetian Structures and Psychological Constructivism," in Perspectives on Learning (4th edition). New York: Teachers College Press. Salvo, Michael J. (2001). Ethics of Engagement: User-Centered Design and Rhetorical Methodology. Technical Communication Quarterly Volume 10, Issue 3, 2001. pages 273-290. http://www.ship.edu/~cgboeree/piaget.html http://owl.english.purdue.edu/owl/resource/624/01/

NASA Scientific and Technical Information Standards

NASA Technical Reports Server (NTRS)

2006-01-01

This document presents general recommended standards for documenting scientific and technical information (STI) from a number of scientific and engineering disciplines. It is a companion publication to NASA SP-7084, "Grammar, Punctuation, and Capitalization: A Handbook for Technical Writers and Editors," and is intended primarily for STI personnel and publishing personnel within NASA and who support NASA STI publishing. Section 1 gives an overview of NASA STI publications. Section 2 discusses figure preparation considerations. Section 3 covers table design, and Section 4 gives information about symbols and math related to STI publishing. Section 5 covers units of measure. Section 6 discusses References, and Section 7 discusses electronic documents. Section 8 covers information related to the review of STI prior to publication; this covers both technical and dissemination review and approval, including data quality. Section 9 discusses printing and dissemination related to STI, and Section 10 gives abbreviations and acronyms used in the document.

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Buhler, Melanie; Valett, Jon

1989-01-01

An annotated bibliography is presented of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. The bibliography was updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials were grouped into eight general subject areas for easy reference: (1) The Software Engineering Laboratory; (2) The Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. Subject and author indexes further classify these documents by specific topic and individual author.

Software engineering laboratory series: Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Morusiewicz, Linda; Valett, Jon

1992-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) the Software Engineering Laboratory; (2) the Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

Comparison of the Booster Interface Temperature in Stainless Steel (SS) V-Channel versus the Aluminum (Al) Y-Channel Primer Chamber Assemblies (PCAs). Volume 1; Technical Assessment Report

NASA Technical Reports Server (NTRS)

Garcia, Roberto; Saulsberry, Regor L.

2011-01-01

NASA's Technical Fellow for Propulsion, requested a technical assessment of the performance improvement achieved by the introduction of the stainless steel (SS) V-channel compared to the aluminum (Al) Y-channel Primer Chamber Assembly (PCA) design. The SS V-channel PCA was developed for NASA's Mars Science Laboratory (MSL) Project. The principle focus of the assessment was to measure the transient temperature at the booster interface with both designs. This document contains the findings of the assessment.

Field sampling and data analysis methods for development of ecological land classifications: an application on the Manistee National Forest.

Treesearch

George E. Host; Carl W. Ramm; Eunice A. Padley; Kurt S. Pregitzer; James B. Hart; David T. Cleland

1992-01-01

Presents technical documentation for development of an Ecological Classification System for the Manistee National Forest in northwest Lower Michigan, and suggests procedures applicable to other ecological land classification projects. Includes discussion of sampling design, field data collection, data summarization and analyses, development of classification units,...

Professional Development Capacity Building in Pennsylvania's Regional Staff Development Program: The "WorkNet" Project. Final Report [and] WorkNet Workplace Literacy Trainer's Guide.

ERIC Educational Resources Information Center

Carman, Priscilla S.

These two documents are products of a project to improve the capability of the Pennsylvania Regional Staff Development Centers to provide current, research-based workplace literacy training and technical assistance to adult basic and literacy education programs. The final report describes these project activities: development of training materials…

Technical Potential Assessment for the Renewable Energy Zone (REZ) Process: A GIS-Based Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Nathan; Roberts, Billy J

Geographic Information Systems (GIS)-based energy resource and technical potential assessments identify areas capable of supporting high levels of renewable energy (RE) development as part of a Renewable Energy Zone (REZ) Transmission Planning process. This document expands on the REZ Process to aid practitioners in conducting GIS-based RE resource and technical potential assessments. The REZ process is an approach to plan, approve, and build transmission infrastructure that connects REZs - geographic areas that have high-quality RE resources, suitable topography and land-use designations, and demonstrated developer interest - to the power system. The REZ process helps to increase the share of solarmore » photovoltaic (PV), wind, and other resources while also maintaining reliability and economics.« less

Controller evaluation of initial data link terminal air traffic control services : final report

DOT National Transportation Integrated Search

1991-01-01

This document details the results the first Federal Aviation Administration : Technical Center investigation of the initial terminal air traffic control : services developed for transmission using Data Link technology. Initial Data : Link services we...

GENERAL METHODS FOR REMEDIAL PERFORMANCE EVALUATIONS

EPA Science Inventory

This document was developed by an EPA-funded project to explain technical considerations and principles necessary to evaluated the performance of ground-water contamination remediations at hazardous waste sites. This is neither a "cookbook", nor an encyclopedia of recommended fi...

48 CFR 27.305-2 - Administration by the Government.

Code of Federal Regulations, 2013 CFR

2013-10-01

... personnel to identify novel developments made in contracts; (2) To review technical reports submitted by... responsible for receiving invention disclosures, reports, confirmatory instruments, notices, requests, and... disclosures, reports, confirmatory instruments, notices, requests, and other documents and information...

48 CFR 27.305-2 - Administration by the Government.

Code of Federal Regulations, 2012 CFR

2012-10-01

... personnel to identify novel developments made in contracts; (2) To review technical reports submitted by... responsible for receiving invention disclosures, reports, confirmatory instruments, notices, requests, and... disclosures, reports, confirmatory instruments, notices, requests, and other documents and information...

48 CFR 27.305-2 - Administration by the Government.

Code of Federal Regulations, 2011 CFR

2011-10-01

... personnel to identify novel developments made in contracts; (2) To review technical reports submitted by... responsible for receiving invention disclosures, reports, confirmatory instruments, notices, requests, and... disclosures, reports, confirmatory instruments, notices, requests, and other documents and information...

48 CFR 27.305-2 - Administration by the Government.

Code of Federal Regulations, 2014 CFR

2014-10-01

... personnel to identify novel developments made in contracts; (2) To review technical reports submitted by... responsible for receiving invention disclosures, reports, confirmatory instruments, notices, requests, and... disclosures, reports, confirmatory instruments, notices, requests, and other documents and information...

EU-US standards harmonization task group report : feedback to standards development organizations - security

DOT National Transportation Integrated Search

1998-07-01

This document assembles best practices and presents practical advice on how to acquire the software components of Intelligent Transportation Systems (ITS). The intended audience is the customers--project leaders, technical contract managers, de...

Building the Digital Library Infrastructure: A Primer.

ERIC Educational Resources Information Center

Tebbetts, Diane R.

1999-01-01

Provides a framework for examining the complex infrastructure needed to successfully implement a digital library. Highlights include database development, online public-access catalogs, interactive technical services, full-text documents, hardware and wiring, licensing, access, and security issues. (Author/LRW)

Careers in the Aerospace Industry.

ERIC Educational Resources Information Center

Federal Aviation Administration (DOT), Washington, DC. Office of General Aviation.

The document briefly presents career information in the field of aerospace industry. Employment exists in three areas: (1) professional and technical occupations in research and development (engineers, scientists, and technicians); (2) administrative, clerical, and related occupations (engineers, scientists, technicians, clerks, secretaries,…

Oak Ridge Environmental Information System (OREIS) functional system design document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birchfield, T.E.; Brown, M.O.; Coleman, P.R.

1994-03-01

The OREIS Functional System Design document provides a detailed functional description of the Oak Ridge Environmental Information System (OREIS). It expands the system requirements defined in the OREIS Phase 1-System Definition Document (ES/ER/TM-34). Documentation of OREIS development is based on the Automated Data Processing System Development Methodology, a Martin Marietta Energy Systems, Inc., procedure written to assist in developing scientific and technical computer systems. This document focuses on the development of the functional design of the user interface, which includes the integration of commercial applications software. The data model and data dictionary are summarized briefly; however, the Data Management Planmore » for OREIS (ES/ER/TM-39), a companion document to the Functional System Design document, provides the complete data dictionary and detailed descriptions of the requirements for the data base structure. The OREIS system will provide the following functions, which are executed from a Menu Manager: (1) preferences, (2) view manager, (3) macro manager, (4) data analysis (assisted analysis and unassisted analysis), and (5) spatial analysis/map generation (assisted ARC/INFO and unassisted ARC/INFO). Additional functionality includes interprocess communications, which handle background operations of OREIS.« less

76 FR 28101 - Notice of Availability of NUREG-1950: ``Disposition of Public Comments and Technical Bases for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

....'' This document is a knowledge management transfer document associated with Revision 2 of NUREG-1801... Review of License Renewal Applications for Nuclear Power Plants.'' The technical changes that were made...

Air Quality Modeling Technical Support Document for the Final Cross State Air Pollution Rule Update

EPA Pesticide Factsheets

In this technical support document (TSD) we describe the air quality modeling performed to support the final Cross State Air Pollution Rule for the 2008 ozone National Ambient Air Quality Standards (NAAQS).

Technical Support Document for Title V Permitting of Printing Facilities

EPA Pesticide Factsheets

Stationary source emissions monitoring is required to demonstrate that a source is meeting the requirements in Federal or state rules, including Title V. This document provides the technical support for compliance in the printing and publishing industry.

TECHNICAL RESOURCE DOCUMENT ON MONITORED NATURAL RECOVERY

EPA Science Inventory

In 2005, the United States Environmental Protection Agency (EPA) published a document entitled Contaminated Sediment Remediation Guidance for Hazardous Waste Sites (EPA, 2005), which provides technical and policy guidance for project managers and teams making risk manageme...

Quantity and unit extraction for scientific and technical intelligence analysis

NASA Astrophysics Data System (ADS)

David, Peter; Hawes, Timothy

2017-05-01

Scientific and Technical (S and T) intelligence analysts consume huge amounts of data to understand how scientific progress and engineering efforts affect current and future military capabilities. One of the most important types of information S and T analysts exploit is the quantities discussed in their source material. Frequencies, ranges, size, weight, power, and numerous other properties and measurements describing the performance characteristics of systems and the engineering constraints that define them must be culled from source documents before quantified analysis can begin. Automating the process of finding and extracting the relevant quantities from a wide range of S and T documents is difficult because information about quantities and their units is often contained in unstructured text with ad hoc conventions used to convey their meaning. Currently, even simple tasks, such as searching for documents discussing RF frequencies in a band of interest, is a labor intensive and error prone process. This research addresses the challenges facing development of a document processing capability that extracts quantities and units from S and T data, and how Natural Language Processing algorithms can be used to overcome these challenges.

High School Work and Family Life ITAC [Integrated Technical & Academic Competencies] for Career-Focused Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This document contains a guide to implementing the Ohio Work and Family Life ITAC (Integrated Technical and Academic Competencies), which connects to the Ohio Model Competency-Based Program documents in arts, foreign languages, language arts, mathematics, science, and social studies, as well as the Core ITAC document. The Work and Family Life ITAC…

Review of Web-Based Technical Documentation Processes. FY07 NAEP-QA Special Study Report. TR-08-17

ERIC Educational Resources Information Center

Gribben, Monica; Wise, Lauress; Becker, D. E.

2008-01-01

Beginning with the 2000 and 2001 National Assessment of Educational Progress (NAEP) assessments, the National Center for Education Statistics (NCES) has made technical documentation available on the worldwide web at http://nces.ed.gov/nationsreportcard/tdw/. The web-based documentation is designed to be less dense and more accessible than prior…

NATO Scientific and Technical Information Service (NSTIS): functional description. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Molholm, K.N.; Blados, W.N.; Bulca, C.

1987-08-01

This report provides a functional description of the requirements for a NATO Scientific and Technical Information Service (NSTIS). The user requirements and much of the background information in this report were derived primarily from interviews with more than 60 NATO Headquarters staff members between 2 March and 25 March 1987. In addition, representatives of the Supreme Headquarters Applied Powers Europe (SHAPE) Technical Centre (STC), the Supreme Allied Commander Atlantic (Anti-Submarine Warfare Research) Centre (SACLANTCEN), the NATO Communications and Information Systems Agency (NACISA), The Advisory Group for Aerospace Research and Development (AGARD), the U.S. Defense Technical Information Center (DTIC), and themore » Technical Documentation Center for the Armed Forces in the Netherlands (TDCK), were interviewed, either in person or by telephone.« less

Scientific and Technical Development of the Next Generation Space Telescope

NASA Technical Reports Server (NTRS)

Burg, Richard

2003-01-01

The Next Generation Space Telescope (NGST) is part of the Origins program and is the key mission to discover the origins of galaxies in the Universe. It is essential that scientific requirements be translated into technical specifications at the beginning of the program and that there is technical participation by astronomers in the design and modeling of the observatory. During the active time period of this grant, the PI participated in the NGST program at GSFC by participating in the development of the Design Reference Mission, the development of the full end-to-end model of the observatory, the design trade-off based on the modeling, the Science Instrument Module definition and modeling, the study of proto-mission and test-bed development, and by participating in meetings including quarterly reviews and support of the NGST SWG. This work was documented in a series of NGST Monographs that are available on the NGST web site.

Technical and Legal Documents: St. Louis Park Site

EPA Pesticide Factsheets

Technical and legal documents related to the St. Louis Park Site. Samples of ground water taken in St. Louis Park in 2005 and 2006 by the Minnesota Pollution Control Agency were found to contain volatile organic compounds – known as VOCs.

Solid Waste Program technical baseline description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlson, A.B.

1994-07-01

The system engineering approach has been taken to describe the technical baseline under which the Solid Waste Program is currently operating. The document contains a mission analysis, function analysis, system definition, documentation requirements, facility and project bases, and uncertainties facing the program.

Air Quality Modeling Technical Support Document for the 2008 Ozone NAAQS Cross-State Air Pollution Rule Proposal

EPA Pesticide Factsheets

In this technical support document (TSD) we describe the air quality modeling performed to support the proposed Cross-State Air Pollution Rule for the 2008 ozone National Ambient Air Quality Standards (NAAQS)

Air Quality Modeling Technical Support Document for the 2015 Ozone NAAQS Preliminary Interstate Transport Assessment

EPA Pesticide Factsheets

In this technical support document (TSD) EPA describes the air quality modeling performed to support the 2015 ozone National Ambient Air Quality Standards (NAAQS) preliminary interstate transport assessment Notice of Data Availability (NODA).

Software for Managing the Process of Manpower Training for Economic and Industrial Development.

ERIC Educational Resources Information Center

Catoline, James E.

This document discusses the training capabilities, software, and related products of GTE Sylvania Training Operations (STO). With the rapid emergence and development of the Third World, the technical knowhow of large manufacturing industries has become a marketable commodity in the international transfer of technology. Manpower training and human…

Developing Community-Based Learning Centers for Older Adults. A Technical Assistance Manual.

ERIC Educational Resources Information Center

Sprouse, Betsy M.; Brown, Karen

Designed for community groups and organizations, groups of older adults, senior clubs, and agencies, this manual documents the process of developing community education programs for older adults. The first section introduces the concept of a community learning center, while the second section considers whether a learning center should be…

Development of advanced acreage estimation methods

NASA Technical Reports Server (NTRS)

Guseman, L. F., Jr. (Principal Investigator)

1982-01-01

The development of an accurate and efficient algorithm for analyzing the structure of MSS data, the application of the Akaiki information criterion to mixture models, and a research plan to delineate some of the technical issues and associated tasks in the area of rice scene radiation characterization are discussed. The AMOEBA clustering algorithm is refined and documented.

94-1 Research and development project lead laboratory support. Status report, January 1--March 31, 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dinehart, M.

1996-09-01

This document reports status and technical progress for Los Alamos National Laboratories 94-1 Research and Development projects. An introduction to the project structure and an executive summary are included. Projects described include Electrolytic Decontamination, Combustibles, Detox, Sand, Slag, and Crucible, Surveillance, and Core Technology.

Who Am I? Self-Exploration Series 1. Courseware Evaluation for Vocational and Technical Education.

ERIC Educational Resources Information Center

Miller, Sandra; And Others

This courseware evaluation rates the Who Am I? program developed by Instructional Enterprises. (This program--not contained in this document--is an interactive guidance course including four inventories students use to learn more about themselves.) Part A describes the program in terms of subject area (personal development) and hardware…

California Community Colleges Economic Development Program Annual Report, 2000-2001.

ERIC Educational Resources Information Center

Ferrier, Kay; Magee, Mike

This document discusses the Small Business Development Center initiative which addresses the needs of California businesses to grow through the delivery of one-on-one counseling, seminars, workshops, conferences, and other technical activities. The community colleges host 21 full centers. Some of the major objectives of the initiative are the…

Operational Initiative Review Report of The Small Business Development Center Initiative.

ERIC Educational Resources Information Center

Orr-Carpenter, Deborah

This document discusses the Small Business Development Center initiative which addresses the needs of California businesses to grow through the delivery of one-on-one counseling, seminars, workshops, conferences, and other technical activities. The community colleges host 21 full centers. Some of the major objectives of the initiative are the…

Making a Difference in the Lives of Infants and Toddlers and Their Families: The Impacts of Early Head Start. Volumes I-III: Final Technical Report [and] Appendixes [and] Local Contributions to Understanding the Programs and Their Impacts.

ERIC Educational Resources Information Center

Love, John M.; Kisker, Ellen Eliason; Ross, Christine M.; Schochet, Peter Z.; Brooks-Gunn, Jeanne; Paulsell, Diane; Boller, Kimberly; Constantine, Jill; Vogel, Cheri; Fuligni, Alison Sidle; Brady-Smith, Christy

Early Head Start was designed in 1994 as a 2-generation program to enhance children's development and health, strengthen family and community partnerships, and support the staff delivering new services to low-income families with pregnant women, infants, or toddlers. This document contains the final technical report, appendixes, and local…

PVWatts Version 1 Technical Reference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dobos, A. P.

2013-10-01

The NREL PVWatts(TM) calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes several hidden assumptions about performance parameters. This technical reference details the individual sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimation.

Republic of the Marshall Islands. Energy Project Development Options and Technical Assessment (2013)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conrad, Misty Dawn; Olis, Dan; Ness, J. Erik

2015-09-01

The advancement of renewable energy and energy efficient technologies continues to be fluid. There are many technical opportunities and strategies that can be utilized to guide communities to deploy cost-effective commercial alternative energy options; however, to achieve aggressive economic, environmental, and security goals, it requires a comprehensive, integrated approach. This document reports on the initial findings of an energy assessment that was conducted for the Republic of the Marshall Islands.

Text processing for technical reports (direct computer-assisted origination, editing, and output of text)

DOE Office of Scientific and Technical Information (OSTI.GOV)

De Volpi, A.; Fenrick, M. R.; Stanford, G. S.

1980-10-01

Documentation often is a primary residual of research and development. Because of this important role and because of the large amount of time consumed in generating technical reports, particularly those containing formulas and graphics, an existing data-processing computer system has been adapted so as to provide text-processing of technical documents. Emphasis has been on accuracy, turnaround time, and time savings for staff and secretaries, for the types of reports normally produced in the reactor development program. The computer-assisted text-processing system, called TXT, has been implemented to benefit primarily the originator of technical reports. The system is of particular value tomore » professional staff, such as scientists and engineers, who have responsibility for generating much correspondence or lengthy, complex reports or manuscripts - especially if prompt turnaround and high accuracy are required. It can produce text that contains special Greek or mathematical symbols. Written in FORTRAN and MACRO, the program TXT operates on a PDP-11 minicomputer under the RSX-11M multitask multiuser monitor. Peripheral hardware includes videoterminals, electrostatic printers, and magnetic disks. Either data- or word-processing tasks may be performed at the terminals. The repertoire of operations has been restricted so as to minimize user training and memory burden. Spectarial staff may be readily trained to make corrections from annotated copy. Some examples of camera-ready copy are provided.« less

The Electronic Documentation Project in the NASA mission control center environment

NASA Technical Reports Server (NTRS)

Wang, Lui; Leigh, Albert

1994-01-01

NASA's space programs like many other technical programs of its magnitude is supported by a large volume of technical documents. These documents are not only diverse but also abundant. Management, maintenance, and retrieval of these documents is a challenging problem by itself; but, relating and cross-referencing this wealth of information when it is all on a medium of paper is an even greater challenge. The Electronic Documentation Project (EDP) is to provide an electronic system capable of developing, distributing and controlling changes for crew/ground controller procedures and related documents. There are two primary motives for the solution. The first motive is to reduce the cost of maintaining the current paper based method of operations by replacing paper documents with electronic information storage and retrieval. And, the other is to improve the efficiency and provide enhanced flexibility in document usage. Initially, the current paper based system will be faithfully reproduced in an electronic format to be used in the document viewing system. In addition, this metaphor will have hypertext extensions. Hypertext features support basic functions such as full text searches, key word searches, data retrieval, and traversal between nodes of information as well as speeding up the data access rate. They enable related but separate documents to have relationships, and allow the user to explore information naturally through non-linear link traversals. The basic operational requirements of the document viewing system are to: provide an electronic corollary to the current method of paper based document usage; supplement and ultimately replace paper-based documents; maintain focused toward control center operations such as Flight Data File, Flight Rules and Console Handbook viewing; and be available NASA wide.

Investigations into mirror fabrication metrology analysis

NASA Technical Reports Server (NTRS)

Dimmock, John O.

1994-01-01

This final report describes the work performed under this delivery order from June 1993 through August 1994. The scope of work included three distinct tasks in support of the AXAF-I program. The objective of the first task was to perform investigations of the grinding and polishing characteristics of the zerodur material by fabricating several samples. The second task was to continue the development of the integrated optical performance modeling software for AXAF-I. The purpose of third and final task was to develop and update the database of AXAF technical documents for an easy and rapid access. The MSFC optical and metrology shops were relocated from the B-wing of Building 4487 to Room BC 144 of Building 4466 in the beginning of this contract. This included dismantling, packing, and moving the equipment from its old location, and then reassembling it at the new location. A total of 65 zerodur samples, measuring 1 inch x 2 inches x 6 inches were ground and polished to a surface figure of lambda/10 p-v, and a surface finish of 5A rms were fabricated for coating tests. A number of special purpose tools and metal mirrors were also fabricated to support various AXAF-I development activities. In the metrology area, the ZYGO Mark 4 interferometer was relocated and also upgraded with a faster and more powerful processor. Surface metrology work was also performed on the coating samples and other optics using ZYGO interferometer and WYKO profilometer. A number of new features have been added to the GRAZTRACE program to enhance its analysis and modeling capabilities. A number of new commands have been added to the command mode GRAZTRACE program to provide a better control to the user on the program execution and data manipulation. Some commands and parameter entries have been reorganized for a uniform format. The command mode version of the convolution program CONVOLVE has been developed. An on-line help system and a user's manual have also been developed for the benefit of the users. The database of AXAF technical documents continues to progress. The titles, company name, date, and location of over 390 documents have been entered in this database. This database provides both a data search and retrieval function, and a data adding function. These functions allow a user to quickly search the data files for documents or add new information. A detailed user's guide has also been prepared. This user guide includes a document classification guide, a list of abbreviations, and a list of acronyms, which have been used in compiling this database of AXAF-I technical documents.

Technologies for diagnosis and treatment of acute stroke

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fitch, J.P.

1998-02-09

From October 1994 to June 1997, a multidisciplinary team of scientists and engineers at Lawrence Livermore National Laboratory were funded through LDRD to develop and integrate technologies for diagnosis and treatment of acute stroke. The project was summarized in a Science and Technology Review article `Brain Attack` that appeared in June 1997 and again in the Center for Healthcare Technologies Report (UCRL-LR-124761). This article is the best overview of the project, epidemiology of stroke and technical progress. Most of the technical progress has been documented in conference papers and presentations and refereed journal articles. Additional technical publication can be expectedmore » as our remaining patent applications progress through the US Patent and Trademark Office. The purpose of this report is to provide an appropriate introduction and organization to the numerous publications so that interested readers can quickly find information. Because there is no documentation for the history of this project, this report provides a summary. It also provides the final status report for the LDRD funding.« less

Scalable Architecture for Federated Translational Inquiries Network (SAFTINet) Technology Infrastructure for a Distributed Data Network

PubMed Central

Schilling, Lisa M.; Kwan, Bethany M.; Drolshagen, Charles T.; Hosokawa, Patrick W.; Brandt, Elias; Pace, Wilson D.; Uhrich, Christopher; Kamerick, Michael; Bunting, Aidan; Payne, Philip R.O.; Stephens, William E.; George, Joseph M.; Vance, Mark; Giacomini, Kelli; Braddy, Jason; Green, Mika K.; Kahn, Michael G.

2013-01-01

Introduction: Distributed Data Networks (DDNs) offer infrastructure solutions for sharing electronic health data from across disparate data sources to support comparative effectiveness research. Data sharing mechanisms must address technical and governance concerns stemming from network security and data disclosure laws and best practices, such as HIPAA. Methods: The Scalable Architecture for Federated Translational Inquiries Network (SAFTINet) deploys TRIAD grid technology, a common data model, detailed technical documentation, and custom software for data harmonization to facilitate data sharing in collaboration with stakeholders in the care of safety net populations. Data sharing partners host TRIAD grid nodes containing harmonized clinical data within their internal or hosted network environments. Authorized users can use a central web-based query system to request analytic data sets. Discussion: SAFTINet DDN infrastructure achieved a number of data sharing objectives, including scalable and sustainable systems for ensuring harmonized data structures and terminologies and secure distributed queries. Initial implementation challenges were resolved through iterative discussions, development and implementation of technical documentation, governance, and technology solutions. PMID:25848567

Scalable Architecture for Federated Translational Inquiries Network (SAFTINet) Technology Infrastructure for a Distributed Data Network.

PubMed

Schilling, Lisa M; Kwan, Bethany M; Drolshagen, Charles T; Hosokawa, Patrick W; Brandt, Elias; Pace, Wilson D; Uhrich, Christopher; Kamerick, Michael; Bunting, Aidan; Payne, Philip R O; Stephens, William E; George, Joseph M; Vance, Mark; Giacomini, Kelli; Braddy, Jason; Green, Mika K; Kahn, Michael G

2013-01-01

Distributed Data Networks (DDNs) offer infrastructure solutions for sharing electronic health data from across disparate data sources to support comparative effectiveness research. Data sharing mechanisms must address technical and governance concerns stemming from network security and data disclosure laws and best practices, such as HIPAA. The Scalable Architecture for Federated Translational Inquiries Network (SAFTINet) deploys TRIAD grid technology, a common data model, detailed technical documentation, and custom software for data harmonization to facilitate data sharing in collaboration with stakeholders in the care of safety net populations. Data sharing partners host TRIAD grid nodes containing harmonized clinical data within their internal or hosted network environments. Authorized users can use a central web-based query system to request analytic data sets. SAFTINet DDN infrastructure achieved a number of data sharing objectives, including scalable and sustainable systems for ensuring harmonized data structures and terminologies and secure distributed queries. Initial implementation challenges were resolved through iterative discussions, development and implementation of technical documentation, governance, and technology solutions.

Recognising Potential: Trade Educators Transforming a Workforce

ERIC Educational Resources Information Center

Maurice-Takerei, Lisa

2017-01-01

The importance of developing a knowledgeable, skilled, adaptable and flexible workforce that engages in continuous learning is outlined in the 2015 United Nations Educational, Scientific and Cultural Organization (UNESCO) document "Unleashing the Potential: Transforming Technical and Vocational Education and Training". While this…

Aluminum Rich Epoxy Primer for Ground and Air Vehicles

DTIC Science & Technology

2017-03-01

UNCLASSIFIED DOCUMENT Aluminum Rich Epoxy Primer for Ground and Air Vehicles Monthly Technical Report for the Period: January 20, 2017...Objective: To further develop the Aluminum Rich Epoxy Primer systems for Air and Ground Vehicles while addressing the objective requirements

Plastics Technical Competency Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is intended to assist individuals responsible for developing tech prep programs, lists the occupational, academic, and employability competencies that representatives from education, business/industry, and labor throughout Ohio have identified as being necessary for employment in technician-level positions involving the…

Illinois Manufacturing Technology Curriculum.

ERIC Educational Resources Information Center

Cliffe, Roger; And Others

This manufacturing technology curriculum involves students in learning problem-solving, communication, team building, quality control, safety, math, science, and technical skills. The document begins with a section on implementation, which gives background information on the purposes and development of the curriculum, explains its rationale,…

77 FR 69634 - International Conference on Harmonisation; Guidance on Q11 Development and Manufacture of Drug...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-20

... Document (CTD). The guidance is intended to harmonize the scientific and technical principles relating to... sections of the CTD. A summary of changes includes the following: (1) Revisions to the introduction and...

Collection Assessment. SPEC Kit 41.

ERIC Educational Resources Information Center

Association of Research Libraries, Washington, DC. Office of Management Studies.

This Association of Research Libraries (ARL) kit on collection assessment contains the following documents: (1) "Guidelines for the Evaluation of Library Collections--Draft Copy" (Collection Development Committee, Resource Section, Resources and Technical Services Division, American Library Association); (2) "Guidelines for Collection Assessment"…

Tank waste remediation system functions and requirements document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carpenter, K.E

1996-10-03

This is the Tank Waste Remediation System (TWRS) Functions and Requirements Document derived from the TWRS Technical Baseline. The document consists of several text sections that provide the purpose, scope, background information, and an explanation of how this document assists the application of Systems Engineering to the TWRS. The primary functions identified in the TWRS Functions and Requirements Document are identified in Figure 4.1 (Section 4.0) Currently, this document is part of the overall effort to develop the TWRS Functional Requirements Baseline, and contains the functions and requirements needed to properly define the top three TWRS function levels. TWRS Technicalmore » Baseline information (RDD-100 database) included in the appendices of the attached document contain the TWRS functions, requirements, and architecture necessary to define the TWRS Functional Requirements Baseline. Document organization and user directions are provided in the introductory text. This document will continue to be modified during the TWRS life-cycle.« less

10 CFR 961.11 - Text of the contract.

Code of Federal Regulations, 2012 CFR

2012-01-01

... characteristic, of a specific or technical nature. It may, for example, document research, experimental... computer software documentation). Examples of technical data include research and engineering data... repository, to take title to the spent nuclear fuel or high-level radioactive waste involved as expeditiously...

10 CFR 961.11 - Text of the contract.

Code of Federal Regulations, 2011 CFR

2011-01-01

... characteristic, of a specific or technical nature. It may, for example, document research, experimental... computer software documentation). Examples of technical data include research and engineering data... repository, to take title to the spent nuclear fuel or high-level radioactive waste involved as expeditiously...

Performance Analysis of Tower Watch Camera Systems

DTIC Science & Technology

2001-05-01

U.S. Coast Guard Research and Development Center 1082 Shennecossett Road, Groton, CT 06340-6096 Report No. CG-D-10-01 Performance...Project Number Task Number Work Unit Number Performing Organization Name(s) and Address(es) U.S. Coast Guard Research and Development Center 1082 ...Research & Development Center 1082 Shennecossett Road Groton, CT 06340-6096 iii Technical Report Documentation Page 1. Report No. CG

Curriculum Developed through Project 05-485-150-613: Services to the Disadvantaged--Curriculum Development FY 1992-93.

ERIC Educational Resources Information Center

Blackhawk Technical Coll., Janesville, WI.

This document consists of 37 draft curriculum maps and 3 curricula that were developed to enable vocational students to make a smooth transition from their high school vocational program to an associate degree or vocational diploma program at Blackhawk Technical College in Wisconsin. The career maps outline the reading, mathematics, and other…

Technical structure of the global nanoscience and nanotechnology literature

NASA Astrophysics Data System (ADS)

Kostoff, Ronald N.; Koytcheff, Raymond G.; Lau, Clifford G. Y.

2007-10-01

Text mining was used to extract technical intelligence from the open source global nanotechnology and nanoscience research literature. An extensive nanotechnology/nanoscience-focused query was applied to the Science Citation Index/Social Science Citation Index (SCI/SSCI) databases. The nanotechnology/nanoscience research literature technical structure (taxonomy) was obtained using computational linguistics/document clustering and factor analysis. The infrastructure (prolific authors, key journals/institutions/countries, most cited authors/journals/documents) for each of the clusters generated by the document clustering algorithm was obtained using bibliometrics. Another novel addition was the use of phrase auto-correlation maps to show technical thrust areas based on phrase co-occurrence in Abstracts, and the use of phrase-phrase cross-correlation maps to show technical thrust areas based on phrase relations due to the sharing of common co-occurring phrases. The ˜400 most cited nanotechnology papers since 1991 were grouped, and their characteristics generated. Whereas the main analysis provided technical thrusts of all nanotechnology papers retrieved, analysis of the most cited papers allowed their characteristics to be displayed. Finally, most cited papers from selected time periods were extracted, along with all publications from those time periods, and the institutions and countries were compared based on their representation in the most cited documents list relative to their representation in the most publications list.

Engineering Lessons Learned and Systems Engineering Applications

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.

2005-01-01

Systems Engineering is fundamental to good engineering, which in turn depends on the integration and application of engineering lessons learned and technical standards. Thus, good Systems Engineering also depends on systems engineering lessons learned from within the aerospace industry being documented and applied. About ten percent of the engineering lessons learned documented in the NASA Lessons Learned Information System are directly related to Systems Engineering. A key issue associated with lessons learned datasets is the communication and incorporation of this information into engineering processes. Systems Engineering has been defined (EINIS-632) as "an interdisciplinary approach encompassing the entire technical effort to evolve and verify an integrated and life-cycle balanced set of system people, product, and process solutions that satisfy customer needs". Designing reliable space-based systems has always been a goal for NASA, and many painful lessons have been learned along the way. One of the continuing functions of a system engineer is to compile development and operations "lessons learned" documents and ensure their integration into future systems development activities. They can produce insights and information for risk identification identification and characterization. on a new project. Lessons learned files from previous projects are especially valuable in risk

Implementation of quality management in early stages of research and development projects at a university.

PubMed

Fiehe, Sandra; Wagner, Georg; Schlanstein, Peter; Rosefort, Christiane; Kopp, Rüdger; Bensberg, Ralf; Knipp, Peter; Schmitz-Rode, Thomas; Steinseifer, Ulrich; Arens, Jutta

2014-04-01

The ultimate objective of university research and development projects is usually to create knowledge, but also to successfully transfer results to industry for subsequent marketing. We hypothesized that the university technology transfer requires efficient measures to improve this important step. Besides good scientific practice, foresighted and industry-specific adapted documentation of research processes in terms of a quality management system might improve the technology transfer. In order to bridge the gap between research institute and cooperating industry, a model project has been accompanied by a project specific amount of quality management. However, such a system had to remain manageable and must not constrain the researchers' creativity. Moreover, topics and research team are strongly interdisciplinary, which entails difficulties regarding communication because of different perspectives and terminology. In parallel to the technical work of the model project, an adaptable quality management system with a quality manual, defined procedures, and forms and documents accompanying the research, development and validation was implemented. After process acquisition and analysis the appropriate amount of management for the model project was identified by a self-developed rating system considering project characteristics like size, innovation, stakeholders, interdisciplinarity, etc. Employees were trained according to their needs. The management was supported and the technical documentation was optimized. Finally, the quality management system has been transferred successfully to further projects.

Development Impact Assessment Highlights Co-benefits of GHG Mitigation Actions

DOE Office of Scientific and Technical Information (OSTI.GOV)

2016-06-01

This EC-LEDS document describes the Development Impact Assessment (DIA) process that explores interactions between development goals and the low emission development strategies. DIA aims to support informed decision-making by considering how policies and programs intended to meet one goal may impact other development priorities. Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) is a flagship U.S. government-led effort that assists countries in developing and implementing LEDS. The program enhances partner country efforts by providing targeting technical assistance and building a shared global knowledge base on LEDS. is a flagship U.S. government-led effort that assists countries in developing and implementing LEDS.more » The program enhances partner country efforts by providing targeting technical assistance and building a shared global knowledge base on LEDS.« less

Technical and Regulatory Guidance Document for Constructed Treatment Wetlands

DTIC Science & Technology

2003-12-01

leachate and acid mine drainage. The purpose of this document is to provide technical and regulatory guidance to help regulators, industry, consultants...Contaminants at Industrial Facilities .....................41 Table 4-12 Typical Landfill Leachate Characteristics and Removal Efficiencies...43 Table 4-14 Landfill Leachate Characteristics

Controller Evaluation of Initial Data Link Terminal Air Traffic Control Services: Mini Study 2, Volume 1

DOT National Transportation Integrated Search

1992-04-01

This document details the results of the second Mini Study of the Federal : Aviation Administration (FAA)Technical Center investigation and development of : initial terminal air traffic control (ATC) services for transmission using Data : Link techno...

A Technical Report To The Secretary Of Transportation On A National Approach To Augmented Gps Services

DOT National Transportation Integrated Search

1994-12-01

THIS REPORT DOCUMENTS THE DEVELOPMENT OF RECOMMENDATIONS FOR A NATIONAL APPROACH TO AUGMENTED GLOBAL POSITIONING SYSTEM (GPS) SERVICES. THE INSTITUTE FOR TELECOMMUNICATION SCIENCES LED A STUDY TEAM THAT INCLUDED THE U.S. ARMY TOPOGRAPHIC ENGINEERING ...

Tools for a Document Image Utility.

ERIC Educational Resources Information Center

Krishnamoorthy, M.; And Others

1993-01-01

Describes a project conducted at Rensselaer Polytechnic Institute (New York) that developed methods for automatically subdividing pages from technical journals into smaller semantic units for transmission, display, and further processing in an electronic environment. Topics discussed include optical scanning and image compression, digital image…

Investigation into the impact of privatizing civil engineering operations in Louisiana DOTD : [technical summary].

DOT National Transportation Integrated Search

2013-06-01

This report documents an investigation into the possibility of privatizing the civil engineering operations in the Louisiana Department : of Transportation and Development (DOTD). The study was conducted in response to House Resolution 105 of the Lou...

Quality assurance software inspections at NASA Ames: Metrics for feedback and modification

NASA Technical Reports Server (NTRS)

Wenneson, G.

1985-01-01

Software inspections are a set of formal technical review procedures held at selected key points during software development in order to find defects in software documents--is described in terms of history, participants, tools, procedures, statistics, and database analysis.

Industry Restructuring: Extracts from Centre Publications.

ERIC Educational Resources Information Center

Hall, William C., Ed.

This document contains excerpts from material previously published by Australia's TAFE (Technical and Further Education) National Centre for Research and Development on the subjects of industry restructuring, the reasons for restructuring, revising curricula, and providing a service to business and industry. Its contents are "Industry…

[Thematic Issue: International Communications.

ERIC Educational Resources Information Center

Howkins, John, Ed.

1977-01-01

The five major articles in this document examine a variety of subjects: communication issues involved in the upcoming United Nations conference "Technical Cooperation among Developing Countries"; the fundamental role that information plays in the economy and in social structures of advanced industrial economies; an investigation into the…

RADON DIAGNOSTIC MEASUREMENT GUIDANCE FOR LARGE BUILDINGS - VOLUME 1. TECHNICAL REPORT

EPA Science Inventory

The report discusses the development of radon diagnostic procedures and mitigation strategies applicable to a variety of large non-residential buildings commonly found in Florida. The investigations document and evaluate the nature of radon occurrence and entry mechanisms for rad...

Should You Know How to Do Marketing, Advertising, & Public Relations Writing?

ERIC Educational Resources Information Center

Sides, Charles H.

1992-01-01

Argues that technical writers who develop broader writing skills prove to be more valuable to their employers during periods of economic downturn. Offers an overview of the basic skills needed to write marketing, advertising, and public relations documents. (PRA)

Integrating O/S models during conceptual design, part 2

NASA Technical Reports Server (NTRS)

Ebeling, Charles E.

1994-01-01

This report documents the procedures for utilizing and maintaining the Reliability & Maintainability Model (RAM) developed by the University of Dayton for the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) under NASA research grant NAG-1-1327. The purpose of the grant is to provide support to NASA in establishing operational and support parameters and costs of proposed space systems. As part of this research objective, the model described here was developed. Additional documentation concerning the development of this model may be found in Part 1 of this report. This is the 2nd part of a 3 part technical report.

Shuttle payload interface verification equipment study. Volume 2: Technical document, part 1

NASA Technical Reports Server (NTRS)

1976-01-01

The technical analysis is reported that was performed during the shuttle payload interface verification equipment study. It describes: (1) the background and intent of the study; (2) study approach and philosophy covering all facets of shuttle payload/cargo integration; (3)shuttle payload integration requirements; (4) preliminary design of the horizontal IVE; (5) vertical IVE concept; and (6) IVE program development plans, schedule and cost. Also included is a payload integration analysis task to identify potential uses in addition to payload interface verification.

41 CFR 105-50.001-5 - Specialized or technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., technical tests and evaluations, technical information, training activities, surveys, reports, documents... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Specialized or technical... TECHNICAL SERVICES TO STATE AND LOCAL UNITS OF GOVERNMENT § 105-50.001-5 Specialized or technical services...

U.S. Army weapon systems human-computer interface style guide. Version 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Avery, L.W.; O`Mara, P.A.; Shepard, A.P.

1997-12-31

A stated goal of the US Army has been the standardization of the human computer interfaces (HCIs) of its system. Some of the tools being used to accomplish this standardization are HCI design guidelines and style guides. Currently, the Army is employing a number of HCI design guidance documents. While these style guides provide good guidance for the command, control, communications, computers, and intelligence (C4I) domain, they do not necessarily represent the more unique requirements of the Army`s real time and near-real time (RT/NRT) weapon systems. The Office of the Director of Information for Command, Control, Communications, and Computers (DISC4),more » in conjunction with the Weapon Systems Technical Architecture Working Group (WSTAWG), recognized this need as part of their activities to revise the Army Technical Architecture (ATA), now termed the Joint Technical Architecture-Army (JTA-A). To address this need, DISC4 tasked the Pacific Northwest National Laboratory (PNNL) to develop an Army weapon systems unique HCI style guide, which resulted in the US Army Weapon Systems Human-Computer Interface (WSHCI) Style Guide Version 1. Based on feedback from the user community, DISC4 further tasked PNNL to revise Version 1 and publish Version 2. The intent was to update some of the research and incorporate some enhancements. This document provides that revision. The purpose of this document is to provide HCI design guidance for the RT/NRT Army system domain across the weapon systems subdomains of ground, aviation, missile, and soldier systems. Each subdomain should customize and extend this guidance by developing their domain-specific style guides, which will be used to guide the development of future systems within their subdomains.« less

Workplace training for senior trainees: a systematic review and narrative synthesis of current approaches to promote patient safety.

PubMed

Walton, Merrilyn; Harrison, Reema; Burgess, Annette; Foster, Kirsty

2015-10-01

Preventable harm is one of the top six health problems in the developed world. Developing patient safety skills and knowledge among advanced trainee doctors is critical. Clinical supervision is the main form of training for advanced trainees. The use of supervision to develop patient safety competence has not been established. To establish the use of clinical supervision and other workplace training to develop non-technical patient safety competency in advanced trainee doctors. Keywords, synonyms and subject headings were used to search eight electronic databases in addition to hand-searching of relevant journals up to 1 March 2014. Titles and abstracts of retrieved publications were screened by two reviewers and checked by a third. Full-text articles were screened against the eligibility criteria. Data on design, methods and key findings were extracted. Clinical supervision documents were assessed against components common to established patient safety frameworks. Findings from the reviewed articles and document analysis were collated in a narrative synthesis. Clinical supervision is not identified as an avenue for embedding patient safety skills in the workplace and is consequently not evaluated as a method to teach trainees these skills. Workplace training in non-technical patient safety skills is limited, but one-off training courses are sometimes used. Clinical supervision is the primary avenue for learning in postgraduate medical education but the most overlooked in the context of patient safety learning. The widespread implementation of short courses is not matched by evidence of rigorous evaluation. Supporting supervisors to identify teaching moments during supervision and to give weight to non-technical skills and technical skills equally is critical. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Training and the Development of Curriculum Standards in On Farm Water Management: Pakistan, 1984-1985.

ERIC Educational Resources Information Center

Bergsma, Harold M.

The document describes the 18-month Phase I of the On Farm Management Project--supported by the World Bank and operated by Colorado State University and the Consortium for International Development--to design more systematic approaches to train people who will work in technical settings related to water management and irrigation channel…

Agricultural Diversification and Marketing. Instructional Materials Developed for Secondary, Postsecondary, and Continuing Education Agriculture Programs in Iowa.

ERIC Educational Resources Information Center

Iowa State Dept. of Agriculture, Des Moines.

These instructional materials on agricultural diversification and marketing were developed for use by Iowa's vocational and technical agricultural instructors and extension personnel. This document is one of three manuals making up a single package. (The other two are Christmas Tree Production and Marketing and Sod Production and Marketing). The…

2 + 2 = 5 if 2 Is Large Enough: Rhetorical Spaces of Technology Development in Aerospace Engine Testing.

ERIC Educational Resources Information Center

Ornatowski, Cezar M.

1998-01-01

Examines the nature, extent, and rhetorical exploitation of the margins of indeterminacy in aircraft engine development and testing, focusing particularly on the role of technical documents in creating these margins and in the rhetorical transactions that transpired. Suggests the conditions and implications of these rhetorical transactions need to…

Environmentally Sound Small-Scale Livestock Projects. Guidelines for Planning Series Number 5.

ERIC Educational Resources Information Center

Jacobs, Linda

This document was developed in response to the need for simplified technical information for planning environmentally sound small-scale projects in third world countries. It is aimed specifically at those who are planning or managing small-scale livestock projects in less-developed areas of the tropics and sub-tropics. The guidelines included in…

TECHNICAL APPROACHES TO CHARACTERIZING AND CLEANING UP BROWNFIELDS SITES: GUIDANCE DOCUMENT

EPA Science Inventory

NRMRL-CIN-1741 SAIC. Technical Approaches to Characterizing and Cleaning up Brownfields Sites. EPA/625/R/00/009 (NTIS PB2002-105021) , Available: 68-C7-0011. The guidance document gives assistance to communities, decision-makers, states and municipalities, academia, and the p...

Illinois Occupational Skill Standards: Chemical Process Technical Operators.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended for workforce preparation program providers, details the Illinois Occupational Skill Standards for programs preparing students for employment as chemical process technical operators. The document begins with a brief overview of the Illinois perspective on occupational skill standards and credentialing, the process…

76 FR 17573 - Energy Conservation Standards for Commercial Refrigeration Equipment: Public Meeting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-30

... Preliminary Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document... refrigeration equipment. In addition, DOE encourages written comments on these subjects. To inform interested...

78 FR 20503 - Energy Conservation Program: Availability of the Interim Technical Support Document for High...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-05

... Conservation Program: Availability of the Interim Technical Support Document for High-Intensity Discharge Lamps... high-intensity discharge (HID) lamps energy conservation standards in the Federal Register. This... interim analysis for high- intensity discharge lamps energy conservation standards. The notice provided...

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This document comprises Pacific Northwest National Laboratory`s report for Fiscal Year 1996 on research and development programs. The document contains 161 project summaries in 16 areas of research and development. The 16 areas of research and development reported on are: atmospheric sciences, biotechnology, chemical instrumentation and analysis, computer and information science, ecological science, electronics and sensors, health protection and dosimetry, hydrological and geologic sciences, marine sciences, materials science and engineering, molecular science, process science and engineering, risk and safety analysis, socio-technical systems analysis, statistics and applied mathematics, and thermal and energy systems. In addition, this report provides an overview ofmore » the research and development program, program management, program funding, and Fiscal Year 1997 projects.« less

Automated Generation of Technical Documentation and Provenance for Reproducible Research

NASA Astrophysics Data System (ADS)

Jolly, B.; Medyckyj-Scott, D.; Spiekermann, R.; Ausseil, A. G.

2017-12-01

Data provenance and detailed technical documentation are essential components of high-quality reproducible research, however are often only partially addressed during a research project. Recording and maintaining this information during the course of a project can be a difficult task to get right as it is a time consuming and often boring process for the researchers involved. As a result, provenance records and technical documentation provided alongside research results can be incomplete or may not be completely consistent with the actual processes followed. While providing access to the data and code used by the original researchers goes some way toward enabling reproducibility, this does not count as, or replace, data provenance. Additionally, this can be a poor substitute for good technical documentation and is often more difficult for a third-party to understand - particularly if they do not understand the programming language(s) used. We present and discuss a tool built from the ground up for the production of well-documented and reproducible spatial datasets that are created by applying a series of classification rules to a number of input layers. The internal model of the classification rules required by the tool to process the input data is exploited to also produce technical documentation and provenance records with minimal additional user input. Available provenance records that accompany input datasets are incorporated into those that describe the current process. As a result, each time a new iteration of the analysis is performed the documentation and provenance records are re-generated to provide an accurate description of the exact process followed. The generic nature of this tool, and the lessons learned during its creation, have wider application to other fields where the production of derivative datasets must be done in an open, defensible, and reproducible way.

Programmatic Agreements for Project-Level Air Quality Analyses : NCHRP 25-25 Task 78

DOT National Transportation Integrated Search

2015-09-01

The research performed under Task 78 was divided into two phases. The first phase involved development of a draft Programmatic Agreement (PA) template and a draft Technical Support Document (TSD) template for project-level carbon monoxide (CO) hot-sp...

A FRAMEWORK FOR A COMPUTATIONAL TOXICOLOGY RESEARCH PROGRAM IN ORD

EPA Science Inventory

"A Framework for a Computational Toxicology Research Program in ORD" was drafted by a Technical Writing Team having representatives from all of ORD's Laboratories and Centers. The document describes a framework for the development of an program within ORD to utilize approaches d...

Sports Marketing.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document presents the Ohio Integrated Technical and Academic Competency profile for sports marketing. The profile is to serve as the basis for curriculum development in Ohio's secondary, adult, and postsecondary programs. The profile includes a comprehensive listing of 999 specialty key indicators for evaluating mastery of 113 competencies in…

ENVIRONMENTAL MONITORING AND ASSESSMENT PROGRAM-SURFACE WATERS WESTERN PILOT STUDY: FIELD OPERATIONS MANUAL FOR WADEABLE STREAMS

EPA Science Inventory

This document describes field procedures that were used during the Environmental Monitoring and Assessment Program (EMAP) Western Pilot Study, conducted from 1999 through 2004. Objectives for EMAP involve developing appropriate scientific and technical tools for evaluating ecolo...

Acquisition plan for Digital Document Storage (DDS) prototype system

NASA Technical Reports Server (NTRS)

1990-01-01

NASA Headquarters maintains a continuing interest in and commitment to exploring the use of new technology to support productivity improvements in meeting service requirements tasked to the NASA Scientific and Technical Information (STI) Facility, and to support cost effective approaches to the development and delivery of enhanced levels of service provided by the STI Facility. The DDS project has been pursued with this interest and commitment in mind. It is believed that DDS will provide improved archival blowback quality and service for ad hoc requests for paper copies of documents archived and serviced centrally at the STI Facility. It will also develop an operating capability to scan, digitize, store, and reproduce paper copies of 5000 NASA technical reports archived annually at the STI Facility and serviced to the user community. Additionally, it will provide NASA Headquarters and field installations with on-demand, remote, electronic retrieval of digitized, bilevel, bit mapped report images along with branched, nonsequential retrieval of report subparts.

Indexing NASA programs for technology transfer methods development and feasibility

NASA Technical Reports Server (NTRS)

Clingman, W. H.

1972-01-01

This project was undertaken to evaluate the application of a previously developed indexing methodology to ongoing NASA programs. These programs are comprehended by the NASA Program Approval Documents (PADS). Each PAD contains a technical plan for the area it covers. It was proposed that these could be used to generate an index to the complete NASA program. To test this hypothesis two PADS were selected by the NASA Technology Utilization Office for trial indexing. Twenty-five individuals indexed the two PADS using NASA Thesaurus terms. The results demonstrated the feasibility of indexing ongoing NASA programs using PADS as the source of information. The same indexing methodology could be applied to other documents containing a brief description of the technical plan. Results of this project showed that over 85% of the concepts in the technology should be covered by the indexing. Also over 85% of the descriptors chosen would be accurate. This completeness and accuracy for the indexing is considered satisfactory for application in technology transfer.

Built-in-Test Verification Techniques

DTIC Science & Technology

1987-02-01

report documents the results of the effort for the Rome Air Development Center Contract F30602-84-C-0021, BIT Verification Techniques. The work was...Richard Spillman of Sp.,llman Research Associates. The principal investigators were Mike Partridge and subsequently Jeffrey Albert. The contract was...two your effort to develop techniques for Built-In Test (BIT) verification. The objective of the contract was to develop specifications and technical

Issues in the Development of Long Term Care Gerontology Centers: The Centers Concept. Selected Topics in Long Term Care. Volume 6.

ERIC Educational Resources Information Center

Mortenson, Lee E.; Berdes, Celia M.

This document, one in a series developed to provide technical assistance to 22 Long-Term Care Gerontology Centers, describes the current administrative and structural phenomenon of these centers. Precedents useful in assessing both the current climate and actual prospects for development of long term care centers are cited. The first section…

48 CFR 801.602-83 - Documents to submit for legal or technical review-contract modifications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Documents to submit for legal or technical review-contract modifications. 801.602-83 Section 801.602-83 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS GENERAL DEPARTMENT OF VETERANS AFFAIRS ACQUISITION...

Student Flow Model SFM-IA: System Documentation. Technical Report 41B. Preliminary Edition.

ERIC Educational Resources Information Center

Busby, John C.; Johnson, Richard S.

Technical specifications, operating procedures, and reference information for the National Center for Higher Education Management Systems' (NCHEMS) Student Flow Model (SFM) computer programs are presented. Included are narrative descriptions of the system and its modules, specific program documentation for each of the modules, system flowcharts,…

48 CFR 801.602-79 - Processing solicitations and contract documents for legal or technical review-Veterans Benefits...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Processing solicitations and contract documents for legal or technical review-Veterans Benefits Administration. 801.602-79 Section 801.602-79 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS GENERAL...

48 CFR 801.602-83 - Documents to submit for legal or technical review-contract modifications.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Documents to submit for legal or technical review-contract modifications. 801.602-83 Section 801.602-83 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS GENERAL DEPARTMENT OF VETERANS AFFAIRS ACQUISITION...

48 CFR 801.602-83 - Documents to submit for legal or technical review-contract modifications.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Documents to submit for legal or technical review-contract modifications. 801.602-83 Section 801.602-83 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS GENERAL DEPARTMENT OF VETERANS AFFAIRS ACQUISITION...

48 CFR 801.602-83 - Documents to submit for legal or technical review-contract modifications.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Documents to submit for legal or technical review-contract modifications. 801.602-83 Section 801.602-83 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS GENERAL DEPARTMENT OF VETERANS AFFAIRS ACQUISITION...

48 CFR 801.602-83 - Documents to submit for legal or technical review-contract modifications.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Documents to submit for legal or technical review-contract modifications. 801.602-83 Section 801.602-83 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS GENERAL DEPARTMENT OF VETERANS AFFAIRS ACQUISITION...

75 FR 56021 - Energy Conservation Standards for Battery Chargers and External Power Supplies: Public Meeting...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-15

... Preliminary Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document... that DOE could consider for these products. DOE also encourages interested parties to submit written...

75 FR 14319 - Energy Conservation Standards for Fluorescent Lamp Ballasts: Public Meeting and Availability of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document. SUMMARY: The... products. DOE encourages written comments on these subjects. To inform interested parties and facilitate...

76 FR 18127 - Energy Conservation Standards for Metal Halide Lamp Fixtures: Public Meeting and Availability of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document. SUMMARY: The... for this equipment. DOE encourages written comments on these subjects. To inform interested parties...

77 FR 43015 - Energy Conservation Standards for Commercial and Industrial Electric Motors: Public Meeting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-23

... Motors: Public Meeting and Availability of the Preliminary Technical Support Document AGENCY: Office of... availability of preliminary technical support document. SUMMARY: The U.S. Department of Energy (DOE or... consider for this equipment. DOE also encourages interested parties to submit written comments on these...

77 FR 13026 - Energy Conservation Program: Energy Conservation Standard for Automatic Commercial Ice Makers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

... written comments on these subjects. This document announces an extension of the time period for submitting... preliminary technical support document (preliminary TSD) for automatic commercial ice makers. The comment... published a Federal Register notice announcing the availability of its preliminary technical support...

77 FR 3404 - Energy Conservation Standards for Automatic Commercial Ice Makers: Public Meeting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-24

... Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document. SUMMARY: The... commercial ice makers. In addition, DOE encourages written comments on these subjects. To inform interested...

75 FR 17080 - Energy Conservation Standards for Walk-in Coolers and Walk-in Freezers: Public Meeting and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-05

... Preliminary Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document... consider for this equipment. In addition, DOE encourages written comments on these subjects. To inform...

77 FR 40530 - Energy Conservation Standards for Residential Furnace Fans: Public Meeting and Availability of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-10

... Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting and availability of preliminary technical support document. SUMMARY: The... furnace fans. In addition, DOE encourages written comments on these subjects. To inform interested parties...

Radon Reduction Techniques in Schools: Interim Technical Guidance.

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC.

This technical document is intended to assist school facilities maintenance personnel in the selection, design, and operation of radon reduction systems in schools. The guidance contained in this document is based largely on research conducted in 1987 and 1988 in schools located in Maryland and Virginia. Researchers from the United States…

How to Overcome Information Anxiety: Assignment and Use of DoD Distribution Statements for Technical Documents. Volume 1. Facilitor Guide

DTIC Science & Technology

1998-05-01

distribution limitations recommended if public release is not approved. The ASD(PA) shall also process appeals when public release denial is based upon...Rules of Evidence, and all other applicable laws. An interlocutory appeal by the United States shall lie from a decision or order of a district court... limitations ; document markings; document preparation; scientific and technical information; STINFO; information security; security training

Deployment Area Selection and Land Withdrawal/Acquisition. M-X/MPS (M-X/Multiple Protective Shelter) Environmental Technical Report. Nye County, Nevada.

DTIC Science & Technology

1981-10-02

captures the environ- mental data and analysis in the document that was nearing com- pletion when the President decided to deploy the system in a...environmental technical " data from the Congress, federal agencies and the states involved, we have published limited copies of the document for their use...Land Withdrawal/Acquisition Environmental Impact Statement (FEIS) and its associated Environmental Technical Reports (ETRs). The data tables

NASA Langley Scientific and Technical Information Output: 1998

NASA Technical Reports Server (NTRS)

Machie, Harriet B. (Compiler); Stewart, Susan H. (Compiler)

1999-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1998. Included are citations for Technical Publications, Conference Publications, Technical Memorandums, Contractor Reports, Journal Articles and Book Publications, Meeting Presentations, Technical Talks, and Patents.

NASA Langley Scientific and Technical Information Output-2001

NASA Technical Reports Server (NTRS)

Stewart, Susan H. (Compiler)

2002-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the 2001 calendar year. Included are citations for Technical Publications, Conference Publications, Technical Memorandums, Contractor Reports, Journal Articles and Book Publications, Meeting Presentations, Technical Talks, and Patents.

NASA Langley Scientific and Technical Information Output-2002

NASA Technical Reports Server (NTRS)

Stewart, Susan H. (Compiler)

2003-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 2002. Included are citations for Technical Publications, Conference Publications, Technical Memorandums, Contractor Reports, Journal Articles and Book Publications, Meeting Presentations, Technical Talks, and Patents.

NOAAPORT User's Page

Science.gov Websites

Update History NOAAPORT Technical Contacts NOAAPORT Program Overview NOAAPORT Reference Documentation NOAAPORT Update History - for the NOAAPORT Program. NOAAPORT Technical Contacts - NWS Technical Points of Alignment Information. Receiver Characteristics - Technical Characteristics of the NOAAPORT Receiver. Data

Facilitating access to information in large documents with an intelligent hypertext system

NASA Technical Reports Server (NTRS)

Mathe, Nathalie

1993-01-01

Retrieving specific information from large amounts of documentation is not an easy task. It could be facilitated if information relevant in the current problem solving context could be automatically supplied to the user. As a first step towards this goal, we have developed an intelligent hypertext system called CID (Computer Integrated Documentation) and tested it on the Space Station Freedom requirement documents. The CID system enables integration of various technical documents in a hypertext framework and includes an intelligent context-sensitive indexing and retrieval mechanism. This mechanism utilizes on-line user information requirements and relevance feedback either to reinforce current indexing in case of success or to generate new knowledge in case of failure. This allows the CID system to provide helpful responses, based on previous usage of the documentation, and to improve its performance over time.

Proceedings of the workshop "Development of biological decision support systems for resource managers": Denver, Colorado, October 27-29, 1998

USGS Publications Warehouse

Getter, James; D'Erchia, Terry D.; Root, Ralph; Getter, James; D'Erchia, Terry D.; Root, Ralph

1999-01-01

The format for this 3-day workshop (27-29 October 1998) included plenary presentations by USGS Biological Resources Division (BRD) and U.S. Fish and Wildlife Service per onnel who u e and develop decision support systems (DSS); breakout ses ions addressing DSS technical information aspect , outreach/ customer requirements, and future perspectives; and a DSS Steering Committee meeting to evaluate work hop goals and to provide guidance for fu ture efforts. Steering committee action item developed from workshop inputs were to ( I) develop a "DSS framework" document for u e in biological research. (2) develop a "proof of concept" DSS based upon the framework document, and (3) integrate decision support ystem into BRD program elements.

Complying with current Joint Commission Statement of Conditions (SOC) requirements.

PubMed

Erickson, D; Berek, B; Mills, G

1997-01-01

This Technical Document has been developed to provide the reader with insight into the Joint Commission on Accreditation of Healthcare Organizations' (JCAHO) Statement of Conditions (SOC) process and recent changes for completing the SOC for Business Occupancies. The intent of this document is not to replace the instructions in Part 1 of the SOC or to give a complete review of the National Fire Protection Agency's (NFPA) Life Safety Code for health care or business occupancies, but rather to complement them.

The National Nanotechnology Initiative. Research and Development Leading to a Revolution in Technology ad Industry. Supplement to the President’s 2009 Budget

DTIC Science & Technology

2008-09-30

About this document This document is a supplement to the President’s 2009 Budget Request submitted to Congress on February 4, 2008. It gives a ...Initiative (NNI), primarily from a programmatic and budgetary perspective. It is based on the NNI Strategic Plan released in December 2007 and reports...microscope image of C60 molecules on a flat silver surface. Additional technical and ordering information for the new NIST nanoparticle reference

COAL PREPARATION PLANT COMPUTER MODEL: VOLUME I. USER DOCUMENTATION

EPA Science Inventory

The two-volume report describes a steady state modeling system that simulates the performance of coal preparation plants. The system was developed originally under the technical leadership of the U.S. Bureau of Mines and the sponsorship of the EPA. The modified form described in ...

Emission Inventories for Ocean-Going Vessels Using Category 3 Propulsion Engines in or Near the United States; Technical Support Document

EPA Science Inventory

This report describes the development of emission inventories for ocean-going vessels using Category 3 propulsion engines within the U.S. Exclusive Economic Zone. Inventories are presented for the 2002, 2020, and 2030 calendar years.

Personal Consumerism. Courseware Evaluation for Vocational and Technical Education.

ERIC Educational Resources Information Center

Smizer, Janet; And Others

This courseware evaluation rates the "Personal Consumerism" program developed by Aquarius People Materials. (The eight-program series--not contained in this document--includes understanding labels, consumer help, consumer fraud, consumer law, comparative shopping, consumerism and you, reading an advertisement, and tips on buying a used…

AFRPL Rapid Indexing System.

ERIC Educational Resources Information Center

Beltran, Alfred A.

A modified Keyword Out of Context (KWOC) system was developed to gain rapid control over more than 8,000 scattered, unindexed documents. This was the first step in providing the technical information support required by Air Force Rocket Propulsion Laboratory scientists and engineers. Implementation of the KWOC system, computer routines, and…

US EPA GLOBAL POSITIONING SYSTEMS - TECHNICAL IMPLEMENTATION GUIDANCE

EPA Science Inventory

The U.S. EPA Geospatial Quality Council (GQC) was formed in 1998 to provide Quality Assurance guidance for the development, use, and products of geospatial activities and research. The long-term goals of the GQC are expressed in a living document, currently the EPA Geospatial Qua...

Pharmacy Technologist.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of pharmacy technologist, lists technical competencies and competency builders for 16 units pertinent to the health technologies cluster in general as well as those specific to the occupation of pharmacy technologist. The following skill areas…

Operation of the computer model for microenvironment solar exposure

NASA Technical Reports Server (NTRS)

Gillis, J. R.; Bourassa, R. J.; Gruenbaum, P. E.

1995-01-01

A computer model for microenvironmental solar exposure was developed to predict solar exposure to satellite surfaces which may shadow or reflect on one another. This document describes the technical features of the model as well as instructions for the installation and use of the program.

Respiratory Care Therapist.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of respiratory care therapist, lists technical competencies and competency builders for 18 units pertinent to the health technologies cluster in general as well as those specific to the occupation of respiratory care therapist. The following…

Radiographer.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of radiographer, lists technical competencies and competency builders for 18 units pertinent to the health technologies cluster in general as well as those specific to the occupation of radiographer. The following skill areas are covered in the…

Histotechnologist.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of histotechnologist, lists technical competencies and competency builders for 13 units pertinent to the health technologies cluster in general as well as those specific to the areas of histology and phlebotomy. The following skill areas are…

Emergency Medical Technician.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of emergency medical technician, lists technical competencies and competency builders for 18 units pertinent to the health technologies cluster in general and 4 units specific to the occupation of emergency medical technician. The following…

Dental Laboratory Technician.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of dental laboratory technician, lists technical competencies and competency builders for 13 units pertinent to the health technologies cluster in general and 8 units to the occupation of dental laboratory technician. The following skill areas…

Image/Time Series Mining Algorithms: Applications to Developmental Biology, Document Processing and Data Streams

ERIC Educational Resources Information Center

Tataw, Oben Moses

2013-01-01

Interdisciplinary research in computer science requires the development of computational techniques for practical application in different domains. This usually requires careful integration of different areas of technical expertise. This dissertation presents image and time series analysis algorithms, with practical interdisciplinary applications…

Cognitive and Neural Sciences Division, 1988 Programs.

ERIC Educational Resources Information Center

Vaughan, Willard S., Ed.

The research and development efforts performed by principal investigators under sponsorship of the Office of Naval Research Cognitive and Neural Sciences Division during 1988 are documented. The title, name and affiliation of the principal investigator, project code, contract number, current end date, technical objective, approach, and progress of…

Minnesota Department of Education Agricultural Education Program Descriptions 01.0000-01.9095

ERIC Educational Resources Information Center

Minnesota Department of Education, 2004

2004-01-01

This document provides a brief compilation of descriptions of agricultural education programs linked to Career and Technical Education (CTE) initiative in Minnesota. Agriculture Exploration courses focus on the animal sciences, plant sciences, natural resource sciences, agricultural business and marketing, and leadership development. Agribusiness…

Technical Objective Document for Food and Food Service Systems

DTIC Science & Technology

1990-10-01

full ntission posture for exlended duration . 3. POCGRESS AND ACCa -fPLISHMENI’S Natick is responsible for many Research, Development, Test , and...Dr. David L. Kaplan Telephone (508) 651-5525 (Biotechnology) b. Technology Program (1) FY91 Planned Programs Complete Joint Services Front End

Ohio Legal Office Managment. Technical Competency Profile (TCP).

ERIC Educational Resources Information Center

Ray, Gayl M.; Wilson, Nick; Mangini, Rick

This document, which lists core business and legal office management competencies identified by representatives from education and business and industry throughout Ohio, is intended to assist individuals and organizations in developing college tech prep programs that will prepare students from secondary through post-secondary associate degree…

Preschool Contracting: A Technical Assistance Guide. Revision.

ERIC Educational Resources Information Center

Kentucky State Dept. of Education, Frankfort.

This document presents information needed for development of contractual or cooperative arrangements between local school districts and other agencies and programs in Kentucky in order to better serve preschool children who are at risk of educational failure or who have identified disabilities. After an introductory section, the Preschool…

Physical Therapist Assistant.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of physical therapist assistant, lists technical competencies and competency builders for 16 units pertinent to the health technologies cluster in general as well as those specific to the occupation of physical therapist assistant. The…

Occupational Therapy Assistant.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of occupational therapy assistant, lists technical competencies and competency builders for 16 units pertinent to the health technologies cluster in general as well as those specific to the occupation of occupational therapy assistant. The…

Medical Laboratory Technician.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for use in developing a tech prep competency profile for the occupation of medical laboratory technician, lists technical competencies and competency builders for 18 units pertinent to the health technologies cluster in general and 8 units specific to the occupation of medical laboratory technician. The following…

Human factors considerations in the design and evaluation of moving map displays of ownership on the airport surface

DOT National Transportation Integrated Search

2004-09-01

The Federal Aviation Administration (FAA) has requested human factors guidance to support the new moving map Technical Standard Order (TSO)-C165, Electronic Map Display Equipment for Graphical Depiction of Aircraft Position. This document was develop...

NASA Langley Scientific and Technical Information Output 2000

NASA Technical Reports Server (NTRS)

Machie, Harriet B. (Compiler); Stewart, Susan H. (Compiler)

2001-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 2000. Included are citations for Special Publications, Technical Publications, Conference Publications, Technical Memorandum, Contractor Reports, Journal Articles and Book Publications, Meeting Presentations, Technical Talks, Tech Briefs, and Patents.

NASA Langley Scientific and Technical Information Output?2003

NASA Technical Reports Server (NTRS)

Stewart, Susan H. (Compiler)

2004-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 2003. Included are citations for Special Publications, Technical Publications, Conference Publications, Technical Memorandums, Contractor Reports, Journal Articles and Book Publications, Meeting Presentations, Technical Talks, and Patents.

NASA Langley Scientific and Technical Information Output: 1999

NASA Technical Reports Server (NTRS)

Stewart, Susan H. (Compiler); Machie, Harriet (Compiler)

2000-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1999. Included are citations for Special Publications, Technical Publications, Conference Publications, Technical Memorandums, Contractor Reports, Journal Articles and Book Publications, Meeting Presentations, Technical Talks, Tech Briefs, and Patents.

NASAwide electronic publishing system-prototype STI electronic document distribution: Stage-4 evaluation report. Part 2; Appendices

NASA Technical Reports Server (NTRS)

Tuey, Richard C.; Collins, Mary; Caswell, Pamela; Haynes, Bob; Nelson, Michael L.; Holm, Jeanne; Buquo, Lynn; Tingle, Annette; Cooper, Bill; Stiltner, Roy

1996-01-01

This evaluation report contains an introduction, seven chapters, and five appendices. The Introduction describes the purpose, conceptual framework, functional description, and technical report server of the Scientific and Technical Information (STI) Electronic Document Distribution (EDD) project. Chapter 1 documents the results of the prototype STI EDD in actual operation. Chapter 2 documents each NASA center's post processing publication processes. Chapter 3 documents each center's STI software, hardware. and communications configurations. Chapter 7 documents STI EDD policy, practices, and procedures. The appendices consist of (A) the STI EDD Project Plan, (B) Team members, (C) Phasing Schedules, (D) Accessing On-line Reports, and (E) Creating an HTML File and Setting Up an xTRS. In summary, Stage 4 of the NASAwide Electronic Publishing System is the final phase of its implementation through the prototyping and gradual integration of each NASA center's electronic printing systems, desk top publishing systems, and technical report servers, to be able to provide to NASA's engineers, researchers, scientists, and external users, the widest practicable and appropriate dissemination of information concerning its activities and the result thereof to their work stations.

7 CFR 652.35 - State Conservationist decision.

Code of Federal Regulations, 2010 CFR

2010-01-01

... technical service provider, the technical service provider will be given written notice of that... technical service provider's written response and supporting documentation. Both a copy of the decision and..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE Decertification § 652.35...

Transportable educational programs for scientific and technical professionals: More effective utilization of automated scientific and technical data base systems

NASA Technical Reports Server (NTRS)

Dominick, Wayne D.

1987-01-01

This grant final report executive summary documents a major, long-term program addressing innovative educational issues associated with the development, administration, evaluation, and widespread distribution of transportable educational programs for scientists and engineers to increase their knowledge of, and facilitate their utilization of automated scientific and technical information storage and retrieval systems. This educational program is of very broad scope, being targeted at Colleges of Engineering and Colleges of Physical sciences at a large number of colleges and universities throughout the United States. The educational program is designed to incorporate extensive hands-on, interactive usage of the NASA RECON system and is supported by a number of microcomputer-based software systems to facilitate the delivery and usage of the educational course materials developed as part of the program.

Florida specific NTCIP MIB development for actuated signal controller (ASC), closed-circuit television (CCTV), and center-to-center (C2C) communications with SunGuideSM software and ITS device test procedure development : technical report documentation pa

DOT National Transportation Integrated Search

2009-06-30

The project has been focused on National Transportation Communications for ITS Protocol : (NTCIP) research and testing across the entire life cycle of traffic operations, ITS, and statewide : communications deployments. This life cycle includes desig...

Scientific and technical services directed toward the development of planetary quarantine measures for automated spacecraft

NASA Technical Reports Server (NTRS)

1973-01-01

Planetary quarantine requirements and parameters are evaluated for their effects upon automated spacecraft flights data describing the heat resistance of naturally occuring microorganisms and sterilization requirements are analyzed and a possible method for assessment of these data is developed. Pertinent data from planetary mission microbial contamination logs are compiled and maintained in the quarantine document system.

Identifying Professional Development Needs in Mathematics: A Planning Tool for Grades 3-7. Second Edition

ERIC Educational Resources Information Center

Taylor, Mary Jo; Dimino, Joseph A.; Gellar, Leanne Ketterlin; Koontz, Trish

2010-01-01

This document offers a planning tool for grades 3-7 that can be used by regional comprehensive centers, other technical assistance centers, and state departments of education to plan professional development for teachers. It is based on the "National Mathematics Advisory Panel Report" which was published in 2008. The panel synthesized its final…

Toward the 21st Century: Preparing Proactive Visionary Transformational Leaders for Building Learning Communities. Human Resource Development. South Florida Cluster.

ERIC Educational Resources Information Center

Groff, Warren H.

The first part of this document describes Nova University's doctoral program in Vocational, Technical, and Occupational (VTO) Education, developed in response to the need to create high performance learners and leaders for building learning communities. It discusses how a curriculum change in 1990 resulted in the following: conversion of the…

Technical Guidelines and References: Crops Training Component. From: Agricultural Development Workers Training Manual. Volume III: Crops.

ERIC Educational Resources Information Center

Peace Corps, Washington, DC. Information Collection and Exchange Div.

This reference manual for training Peace Corps agricultural development workers deals with crops. The document begins with common units of area, length, weight, volume, and conversions between them. A practice problem is worked and other conversion problems are given. The second section is intended to show agricultural field workers how to survey…

Army Systems Engineering Career Development Model

DTIC Science & Technology

2015-01-15

Army Systems Engineering Career Development Model Technical Report SERC -2015-TR-042-3 January 15, 2015 Principal Investigators: Dr...0021, RT 121 Report No. SERC -2015-TR-042-3 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the collection of...Technology The Systems Engineering Research Center ( SERC ) is a federally funded University Affiliated Research Center managed by Stevens Institute

Review of Early Childhood Policy and Programs in Sub-Saharan Africa. World Bank Technical Paper No. 367, Africa Region Series.

ERIC Educational Resources Information Center

Colletta, Nat J.; Reinhold, Amy Jo

Children in Sub-Saharan Africa face the greatest challenges to healthy development of any region in the world. This report presents reviews of 11 Early Childhood Development programs, studied to define financial and institutional conditions necessary to sustain early intervention efforts. Interviews and existing documentation from governmental and…

International Conference on Recent Research and Development in Vocational Education (Adelaide, South Australia, Australia, March 12-19, 1989). Conference Papers. Volume 2.

ERIC Educational Resources Information Center

TAFE National Centre for Research and Development, Payneham (Australia).

The conference recorded in this document covered a wide variety of themes and consisted of keynote addresses, research presentations, and workshops. The following workshop presentations are included: "Vocational Education in a Developing Country" (Theron); "From the Technical to the Critical: A New Agenda for Vocational Education…

International Conference on Harmonisation; Guidance on Q11 Development and Manufacture of Drug Substances; availability. Notice.

PubMed

2012-11-20

The Food and Drug Administration (FDA) is announcing the availability of a guidance entitled "Q11 Development and Manufacture of Drug Substances.'' The guidance was prepared under the auspices of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH). The guidance describes approaches to developing and understanding the manufacturing process of a drug substance and provides guidance on what information should be provided in certain sections of the Common Technical Document (CTD). The guidance is intended to harmonize the scientific and technical principles relating to the description and justification of the development and manufacturing process of drug substances (both chemical entities and biotechnological/biological entities) to enable a consistent approach for providing and evaluating this information across the three regions. The discussion of principles in the guidance is intended to apply only to the manufacture of drug substance, not the manufacture of finished drug products.

Annual Historical Summary, Defense Documentation Center, 1 July 1968 to 30 June 1969.

ERIC Educational Resources Information Center

Defense Documentation Center, Alexandria, VA.

This summary describes the more significant activities and achievements of the Defense Documentation Center (DDC) including: DDC and the scientific and technical community. The DDC role in the Department of Defense Scientific and Technical Information Program continued to shift from the traditional concept of an archival repository and a…

Administrative Office Technology. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document presents the Ohio Integrated Technical and Academic Competency (ITAC) profile for administrative office technology, which is a comprehensive listing of 58 occupational skill competencies deemed essential for Ohio graduates of programs in office technology. The document begins with an introduction to the ITAC system, a list of…

48 CFR 801.602-77 - Processing solicitations and contract documents for legal or technical review-general.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Processing solicitations and contract documents for legal or technical review-general. 801.602-77 Section 801.602-77 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS GENERAL DEPARTMENT OF VETERANS AFFAIRS...

Challenges and Rewards of Teaching Intercultural Communication in a Technical Writing Course: A Case Study

ERIC Educational Resources Information Center

Cardenas, Diana L.

2012-01-01

Community-based projects immerse technical writing students in intercultural communication, addressing local needs and shaping documents in human terms. Students at a South Texas university work to establish communication with clients in a city-county health department to create effective documents and disseminate family health legislation. To…

"Is This Ethical?" A Survey of Opinion on Principles and Practices of Document Design.

ERIC Educational Resources Information Center

Dragga, Sam

1996-01-01

Reprints a corrected version of an article originally published in the volume 43, number 1 issue of this journal. Presents results of a national survey of technical communicators and technical communication teachers assessing the ethics of seven document design cases involving manipulation of typography, illustrations, and photographs. Offers…

Mathematics Technical Report: Exercise Volume. National Assessment of Educational Progress. Report No. 04-MA-20.

ERIC Educational Resources Information Center

Education Commission of the States, Denver, CO. National Assessment of Educational Progress.

Included in Chapter 1 of this report are background information on the 1972-73 mathematics assessment; details of the computational formulas used in reporting results; and explanations of the technical documentation, exercise presentation, documentation pages, scoring guides, and data tables for released and unreleased exercises. The remainder of…

The Future of Amphibious Operations: Shaping the Expeditionary Strike Group to Fight in the Joint Task Force

DTIC Science & Technology

2010-02-01

1 Charles E. Wilhelm, Expeditionary Warfare.marine corps gazette, 79(6), 28-30. Retrieved October 15, 2009, from Career and Technical Education . (Document...Expeditionary warfare.marine corps gazette, 79(6), 28- 30. Retrieved October 15, 2009, from Career and Technical Education . (Document ID: 4455650

Measuring the Value Added by Technical Documentation: A Review of Research and Practice.

ERIC Educational Resources Information Center

Mead, Jay

1998-01-01

Reviews existing work on establishing value of technical documentation to determine its principles. States that value can be returned by reducing internal investment, increasing sales, and reducing after-sales costs. Argues that further research will improve the understanding of information as the product itself, rather than simply a supporting…

Luis Alvarez, the Hydrogen Bubble Chamber, Tritium, and Dinosaurs

Science.gov Websites

linear accelerator, patented three types of radar still used today, designed an instrument that for 15 is available in documents and on the Web. Documents: Berkeley Proton Linear Accelerator, DOE Technical Report Download Adobe PDF Reader , June 1985 History of Proton Linear Accelerators, DOE Technical

77 FR 35691 - Update to Electronic Common Technical Document Module 1

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-14

... Electronic Common Technical Document (eCTD) Module 1, which is used for electronic submission of... they are received with a limit of 350. SUPPLEMENTARY INFORMATION: The eCTD is an International... Research (CBER) have been receiving submissions in the eCTD format since 2003, and the eCTD has been the...

Education and Training. Annotated Bibliography. Author and Subject Index.

ERIC Educational Resources Information Center

United Nations Food and Agriculture Organization, Rome (Italy).

Food and Agriculture Organization (FAO) publications and documents issued by the Human Resources and Institutions division and by other technical divisions in the technical, economic, and social fields are selected, annotated and indexed in this bibliography. Documents issued prior to 1967 are not included but can be found in the Rural…

Detailed Design Documentation, without the Pain

NASA Astrophysics Data System (ADS)

Ramsay, C. D.; Parkes, S.

2004-06-01

Producing detailed forms of design documentation, such as pseudocode and structured flowcharts, to describe the procedures of a software system:(1) allows software developers to model and discuss their understanding of a problem and the design of a solution free from the syntax of a programming language,(2) facilitates deeper involvement of non-technical stakeholders, such as the customer or project managers, whose influence ensures the quality, correctness and timeliness of the resulting system,(3) forms comprehensive documentation of the system for its future maintenance, reuse and/or redeployment.However, such forms of documentation require effort to create and maintain.This paper describes a software tool which is currently being developed within the Space Systems Research Group at the University of Dundee which aims to improve the utility of, and the incentive for, creating detailed design documentation for the procedures of a software system. The rationale for creating such a tool is briefly discussed, followed by a description of the tool itself, a summary of its perceived benefits, and plans for future work.

Second Annual Workshop on Space Operations Automation and Robotics (SOAR 1988)

NASA Technical Reports Server (NTRS)

Griffin, Sandy (Editor)

1988-01-01

Papers presented at the Second Annual Workshop on Space Operation Automation and Robotics (SOAR '88), hosted by Wright State University at Dayton, Ohio, on July 20, 21, 22, and 23, 1988, are documented herein. During the 4 days, approximately 100 technical papers were presented by experts from NASA, the USAF, universities, and technical companies. Panel discussions on Human Factors, Artificial Intelligence, Robotics, and Space Systems were held but are not documented herein. Technical topics addressed included knowledge-based systems, human factors, and robotics.

Sources of Variability in Chlorophyll Analysis by Fluorometry and High-Performance Liquid Chromatography in a SIMBIOS Inter-Calibration Exercise

NASA Technical Reports Server (NTRS)

VanHeukelem, Laurie; Thomas, Crystal S.; Gilbert, Patricia M.; Fargion, Giulietta S. (Editor); McClain, Charles R. (Editor)

2002-01-01

The purpose of this technical report is to provide current documentation of the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) Project activities, NASA Research Announcement (NRA) research status, satellite data processing, data product validation, and field calibration. This documentation is necessary to ensure that critical information is related to the scientific community and NASA management. This critical information includes the technical difficulties and challenges of validating and combining ocean color data from an array of independent satellite systems to form consistent and accurate global bio-optical time series products. This technical report is not meant as a substitute for scientific literature. Instead, it will provide a ready and responsive vehicle for the multitude of technical reports issued by an operational project. This particular document focus on the variability in chlorophyll pigment measurements resulting from differences in methodologies and laboratories conducting the pigment analysis.

Technical basis for external dosimetry at the Waste Isolation Pilot Plant (WIPP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bradley, E.W.; Wu, C.F.; Goff, T.E.

1993-12-31

The WIPP External Dosimetry Program, administered by Westinghouse Electric Corporation, Waste Isolation Division, for the US Department of Energy (DOE), provides external dosimetry support services for operations at the Waste Isolation Pilot Plant (WIPP) Site. These operations include the receipt, experimentation with, storage, and disposal of transuranic (TRU) wastes. This document describes the technical basis for the WIPP External Radiation Dosimetry Program. The purposes of this document are to: (1) provide assurance that the WIPP External Radiation Dosimetry Program is in compliance with all regulatory requirements, (2) provide assurance that the WIPP External Radiation Dosimetry Program is derived from amore » sound technical base, (3) serve as a technical reference for radiation protection personnel, and (4) aid in identifying and planning for future needs. The external radiation exposure fields are those that are documented in the WIPP Final Safety Analysis Report.« less

Advanced transportation system studies technical area 2(TA-2): Heavy lift launch vehicle development. volume 1; Executive summary

NASA Technical Reports Server (NTRS)

McCurry, J.

1995-01-01

The purpose of the TA-2 contract was to provide advanced launch vehicle concept definition and analysis to assist NASA in the identification of future launch vehicle requirements. Contracted analysis activities included vehicle sizing and performance analysis, subsystem concept definition, propulsion subsystem definition (foreign and domestic), ground operations and facilities analysis, and life cycle cost estimation. This document is part of the final report for the TA-2 contract. The final report consists of three volumes: Volume 1 is the Executive Summary, Volume 2 is Technical Results, and Volume 3 is Program Cost Estimates. The document-at-hand, Volume 1, provides a summary description of the technical activities that were performed over the entire contract duration, covering three distinct launch vehicle definition activities: heavy-lift (300,000 pounds injected mass to low Earth orbit) launch vehicles for the First Lunar Outpost (FLO), medium-lift (50,000-80,000 pounds injected mass to low Earth orbit) launch vehicles, and single-stage-to-orbit (SSTO) launch vehicles (25,000 pounds injected mass to a Space Station orbit).

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Minton-Summers, S.; Ray, C. D.

1996-01-01

A summary of work accomplished under Technical Task Agreement by the Marshall Space Flight Center (MSFC) documents activities regarding the Environmental Control and Life Support Systems (ECLSS) of the International Space Station (ISS) program. These MSFC activities were in-line to the designing, the development, the testing, and the flight of ECLSS equipment. MSFC's unique capabilities for performing integrated system testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs are the basis for the Technical Task Agreement activities. Tasks were completed in the Water Recovery Systems, Air Revitalization Systems, and microbiology areas. The results of each task is described in this summary report.

Carl D. Perkins Vocational Education Act. Hearing before the Select Committee on Indian Affairs on S. 496 To Amend the Carl D. Perkins Vocational Education Act To Establish a Program of Grants for Vocational-Technical Training and To Encourage Tribal Economic Development, To Provide for the Designation of the National Indian Center for Research in Vocational-Technical Training. United States Senate, One Hundred First Congress, First Session (September 15, 1989).

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Senate Select Committee on Indian Affairs.

This document contains the text of a Senate hearing examining proposed changes (S. 496) to the Carl D. Perkins Vocational Education Act. The amendment would take effect in October 1991 to establish a program of grants for vocational-technical training and to provide for the designation of the National Indian Center for Research in…

Impact of incomplete correspondence between document titles and texts on users' representations: a cognitive and linguistic analysis based on 25 technical documents.

PubMed

Eyrolle, Hélène; Virbel, Jacques; Lemarié, Julie

2008-03-01

Based on previous research in the field of cognitive psychology, highlighting the facilitatory effects of titles on several text-related activities, this paper looks at the extent to which titles reflect text content. An exploratory study of real-life technical documents investigated the content of their Subject lines, which linguistic analyses had led us to regard as titles. The study showed that most of the titles supplied by the writers failed to represent the documents' contents and that most users failed to detect this lack of validity.

Technical Readiness and Gaps Analysis of Commercial Optical Materials and Measurement Systems for Advanced Small Modular Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anheier, Norman C.; Suter, Jonathan D.; Qiao, Hong

2013-08-06

This report intends to support Department of Energy’s Office of Nuclear Energy (DOE-NE) Nuclear Energy Research and Development Roadmap and industry stakeholders by evaluating optical-based instrumentation and control (I&C) concepts for advanced small modular reactor (AdvSMR) applications. These advanced designs will require innovative thinking in terms of engineering approaches, materials integration, and I&C concepts to realize their eventual viability and deployability. The primary goals of this report include: 1. Establish preliminary I&C needs, performance requirements, and possible gaps for AdvSMR designs based on best available published design data. 2. Document commercial off-the-shelf (COTS) optical sensors, components, and materials in termsmore » of their technical readiness to support essential AdvSMR in-vessel I&C systems. 3. Identify technology gaps by comparing the in-vessel monitoring requirements and environmental constraints to COTS optical sensor and materials performance specifications. 4. Outline a future research, development, and demonstration (RD&D) program plan that addresses these gaps and develops optical-based I&C systems that enhance the viability of future AdvSMR designs. The development of clean, affordable, safe, and proliferation-resistant nuclear power is a key goal that is documented in the Nuclear Energy Research and Development Roadmap. This roadmap outlines RD&D activities intended to overcome technical, economic, and other barriers, which currently limit advances in nuclear energy. These activities will ensure that nuclear energy remains a viable component to this nation’s energy security.« less

Trends and problems in development of the power plants electrical part

NASA Astrophysics Data System (ADS)

Gusev, Yu. P.

2015-03-01

The article discusses some problems relating to development of the electrical part of modern nuclear and thermal power plants, which are stemming from the use of new process and electrical equipment, such as gas turbine units, power converters, and intellectual microprocessor devices in relay protection and automated control systems. It is pointed out that the failure rates of electrical equipment at Russian and foreign power plants tend to increase. The ongoing power plant technical refitting and innovative development processes generate the need to significantly widen the scope of research works on the electrical part of power plants and rendering scientific support to works on putting in use innovative equipment. It is indicated that one of main factors causing the growth of electrical equipment failures is that some of components of this equipment have insufficiently compatible dynamic characteristics. This, in turn may be due to lack or obsolescence of regulatory documents specifying the requirements for design solutions and operation of electric power equipment that incorporates electronic and microprocessor control and protection devices. It is proposed to restore the system of developing new and updating existing departmental regulatory technical documents that existed in the 1970s, one of the fundamental principles of which was placing long-term responsibility on higher schools and leading design institutions for rendering scientific-technical support to innovative development of components and systems forming the electrical part of power plants. This will make it possible to achieve lower failure rates of electrical equipment and to steadily improve the competitiveness of the Russian electric power industry and energy efficiency of generating companies.