48 CFR 952.242-70 - Technical direction.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... (3) Reviewing and, where required by the contract, approving, technical reports, drawings... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Technical direction. 952... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.242-70 Technical...

48 CFR 952.242-70 - Technical direction.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... (3) Reviewing and, where required by the contract, approving, technical reports, drawings... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Technical direction. 952... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.242-70 Technical...

48 CFR 952.242-70 - Technical direction.

Code of Federal Regulations, 2014 CFR

2014-10-01

.... (3) Reviewing and, where required by the contract, approving, technical reports, drawings... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Technical direction. 952... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.242-70 Technical...

48 CFR 952.242-70 - Technical direction.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... (3) Reviewing and, where required by the contract, approving, technical reports, drawings... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Technical direction. 952... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.242-70 Technical...

A Discussion of "Nadia": A Case Study of Extraordinary Drawing Ability in an Autistic Child. Technical Report No. 9.

ERIC Educational Resources Information Center

Pariser, David A.

The case study of Nadia, an autistic child, documents the phenomenally accurate drawings she made. Nadia's precocious drawing capacity raises questions about the drawing hypothesis adhered to by F. Goodenough and D. B. Harris and Gestalt theories of perception and representation. The argument is made that Nadia drew realistically because she…

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2014 CFR

2014-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2013 CFR

2013-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2010 CFR

2010-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

48 CFR 252.246-7001 - Warranty of data.

Code of Federal Regulations, 2012 CFR

2012-10-01

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data...

59. Photocopy of Architectural Layout drawing, dated 25 June, 1993 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

59. Photocopy of Architectural Layout drawing, dated 25 June, 1993 by US Air Force Space Command. Original drawing property of United States Air Force, 21" Space Command. AL-6 PAVE PAWS SUPPORT SYSTEMS - CAPE COD AFB, MASSACHUSETTS - LAYOUT 4-A, 5TH & 5-A. DRAWING NO. AL-6 - SHEET 7 OF 21. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

48 CFR 942.270-1 - Contracting Officer's Representatives.

Code of Federal Regulations, 2010 CFR

2010-10-01

... performing certain technical functions in administering a contract. These functions include, but are not limited to, technical monitoring, inspection, approval of shop drawings, testing, and approval of samples. The COR acts solely as a technical representative of the contracting officer and is not authorized to...

57. Photocopy of Architectural Layout drawing, dated 25 June, 1993 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

57. Photocopy of Architectural Layout drawing, dated 25 June, 1993 by US Air Force Space Command. Original drawing property of United States Air Force, 21" Space Command. AL-3 PAVE PAWS SUPPORT SYSTEMS - CAPE COD AFB, MASSACHUSETTS - LAYOUT 1 FLOOR AND 1sr FLOOR ROOF. DRAWING NO. AL-3 - SHEET 4 OF 21. - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

58. Photocopy of Architectural Layout drawing, dated 25 June, 1993 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

58. Photocopy of Architectural Layout drawing, dated 25 June, 1993 by US Air Force Space Command. Original drawing property of United States Air Force, 21" Space Command. AL-5 PAVE PAWS SUPPORT SYSTEMS - CAPE COD AFB, MASSACHUSETTS - LAYOUT 3RD, 3A, 4TH LEVELS. DRAWING NO. AL-5 - SHEET 6 OF 21 - Cape Cod Air Station, Technical Facility-Scanner Building & Power Plant, Massachusetts Military Reservation, Sandwich, Barnstable County, MA

EBR-II and TREAT Digitization Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Griffith, George W.; Rabiti, Cristian

2015-09-01

Digitizing the technical drawings for EBR-II and TREAT provides multiple benefits. Moving the scanned or hard copy drawings to modern 3-D CAD (Computer Aided Drawing) format saves data that could be lost over time. The 3-D drawings produce models that can interface with other drawings to make complex assemblies. The 3-D CAD format can also include detailed material properties and parametric coding that can tie critical dimensions together allowing easier modification. Creating the new files from the old drawings has found multiple inconsistencies that are being flagged or corrected improving understanding of the reactor(s).

Project Interface Requirements Process Including Shuttle Lessons Learned

NASA Technical Reports Server (NTRS)

Bauch, Garland T.

2010-01-01

Most failures occur at interfaces between organizations and hardware. Processing interface requirements at the start of a project life cycle will reduce the likelihood of costly interface changes/failures later. This can be done by adding Interface Control Documents (ICDs) to the Project top level drawing tree, providing technical direction to the Projects for interface requirements, and by funding the interface requirements function directly from the Project Manager's office. The interface requirements function within the Project Systems Engineering and Integration (SE&I) Office would work in-line with the project element design engineers early in the life cycle to enhance communications and negotiate technical issues between the elements. This function would work as the technical arm of the Project Manager to help ensure that the Project cost, schedule, and risk objectives can be met during the Life Cycle. Some ICD Lessons Learned during the Space Shuttle Program (SSP) Life Cycle will include the use of hardware interface photos in the ICD, progressive life cycle design certification by analysis, test, & operations experience, assigning interface design engineers to Element Interface (EI) and Project technical panels, and linking interface design drawings with project build drawings

Improving student’s technical drawing in building technology course with shared and digital enrichment material in order to support green technology

NASA Astrophysics Data System (ADS)

Wizaka, W.; Nurdiani, N.

2017-12-01

Technical drawing is a step that is absolutely necessary to be mastered by the architects in presenting their product in design development phase. The easy readiness and completeness of information in a drawing determine the quality and timeliness of a project. An incomplete engineering drawing is difficult to read by foreman or craftsman, and the risk of misunderstanding of the drawing will cost expensive and have potential risk to create many bad implications in the project. Unfortunately, the knowledge and skill of drawing technique are often not completely mastered by most students. On the other hand, according to the regional development situation in architectural and construction issue, the drawing standards must be fully utilized in international standards in order to facilitate cooperative work involving workers and engineers from these region countries. This research will be described some errors that often made by students and of international drafting symbols that supposed to be well used by students and then insert multi-media resources as digital enrichment material that supposed to be used as an additional material. The goal of this study will be to examine how multi-media is employed to positively impact student learning in a Building Technology course.

["Hannibal ante portas" -- technical development and health care reorganization].

PubMed

Fülesdi, Béla; Velkey, György

2011-11-20

Authors intend to analyze the impact of medical technical development on the Hungarian health care system and try to draw attention to potentially necessary measures for professional and structural health care reorganization.

Impacts of Music on Sectional View Drawing Ability for Engineering Technology Students as Measured through Technical Drawings

ERIC Educational Resources Information Center

Katsioloudis, Petros; Jones, Mildred; Jovanovic, Vukica

2016-01-01

Results from a number of studies indicate that the use of different types of music can influence cognition and behavior; however, research provides inconsistent results. Considering this, a quasi-experimental study was conducted to identify the existence of statistically significant effects on sectional view drawing ability due to the impacts of…

NPS Draws CTE Educators from around the Country

ERIC Educational Resources Information Center

Emeagwali, N. Susan

2010-01-01

In this article, the author describes the Association for Career and Technical Education's (ACTE) National Policy Seminar (NPS) which successfully brought hundreds of career and technical educators to Arlington, Virginia. The event, which was held March 8-10, provided career and technical education (CTE) professionals with an opportunity to keep…

78 FR 48407 - Defense Federal Acquisition Regulation Supplement: Clauses With Alternates-Quality Assurance...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-08

... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or...

Training Providers of Services to Persons with Developmental Disabilities. Level I. Technical Committee Report and Curriculum Guide. Invest in Success.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

Under the Idaho state system for curriculum development in vocational education, Technical Committees made up solely of industry personnel are responsible for drawing up task lists for each program. A Technical Committee Report is prepared on completion of the committees assignment. This Technical Committee Report presents a task list that…

49 CFR 572.71 - General description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 6-Year-Old Child § 572.71 General description. (a) The representative 6-year-old dummy consists of a drawings and specifications package that contains the following materials: (1) Technical drawings, specifications, and the parts list...

Teaching and Learning the Nature of Technical Artifacts

ERIC Educational Resources Information Center

Frederik, Ineke; Sonneveld, Wim; de Vries, Marc J.

2011-01-01

Artifacts are probably our most obvious everyday encounter with technology. Therefore, a good understanding of the nature of technical artifacts is a relevant part of technological literacy. In this article we draw from the philosophy of technology to develop a conceptualization of technical artifacts that can be used for educational purposes.…

Methodology for Planning Technical Education: With a Case Study of Polytechnics in Bangladesh.

ERIC Educational Resources Information Center

Ritzen, Jozef M.; Balderston, Judith B.

A product of research first begun by one of the authors in Bangladesh, this book develops a comprehensive set of methods for planning technical education. Wherever possible, the authors draw on existing tools, fitting them to the specific context of technical education. When faced with planning problems for which existing methods are ill suited…

DEVELOPMENT OF IMPROVED FABRICATION METHODS, PROCESS AND TECHNIQUES FOR PRODUCING TYPICAL AIRCRAFT SHAPES FROM BERYLLIUM. Interim Technical Documentary Progress Report for the Period ending October 31, 1962

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jenkins, R.G.; Siergiej, J.M.

1962-12-28

In a program to develop a complete manufacturing process for ihe production of beryllium channels, techniques are being sought for drawing to obtain a flnal product meeting specifications more rigorous than are obtainable by direct extrusion. Progress in designing and procuring the special tooling required to draw complex shapes at elevated temperature is described, and the flrst set of draw dies is evaluated with respect to design and quality. Three experimental draw attempts have been made on U-channels, in addition to draw tests on flats. (auth)

Drawing on Technical Writing Scholarship for the Teaching of Writing to Advanced ESL Students--A Writing Tutorial.

ERIC Educational Resources Information Center

Zielinska, Dorota

2003-01-01

Outlines the technical writing tutorial (TWT) that precedes an advanced English as a second language (ESL) writing course for students of English Philology at the Jagiellonian University, Poland. Finds a statistically significant increase in the performance of the students who had taken the TWT. Indicates that technical writing books and journals…

Technical and Occupational Shops.

ERIC Educational Resources Information Center

Ontario Dept. of Education, Toronto. School Planning and Building Research Section.

This booklet presents suggested plans and specifications for and discusses facilities common to technical and occupational shops. Drawings, room plans, and text illustrate specifications for drafting rooms, a welding shop, an automechanics shop, an auto body shop, and a high school greenhouse. Also included are facility designs for agricultural…

Facilitating Service Learning in the Online Technical Communication Classroom

ERIC Educational Resources Information Center

Nielsen, Danielle

2016-01-01

Drawing from the author's experience teaching online technical communication courses with an embedded service-learning component, this essay opens the discussion to the potential problems involved in designing online service-learning courses and provides practical approaches to integrating service learning into online coursework. The essay…

Management Studies Educational Knowledge: Technical, Elite or Political?

ERIC Educational Resources Information Center

Hordern, Jim

2014-01-01

This paper draws on the technical, elite and political interpretations of the purpose of management, to identify demands for particular forms of educational knowledge in the management studies curriculum. The varied character of this knowledge is discussed using Bernsteinian concepts of verticality, grammaticality, classification and framing, and…

The Humanities in the Two-Year Agricultural Technical College.

ERIC Educational Resources Information Center

Nelson, Ronald J.

Drawing from the experiences of the University of Minnesota Technical College, Waseca (UMW), this paper provides a rationale and suggestions for promoting and integrating the humanities in vocational education. After discussions of the problems of interesting occupational students in humanities courses and the value of humanities instruction in…

Technical Drafting and Mental Visualization in Interior Architecture Education

ERIC Educational Resources Information Center

Arslan, Ali Riza; Dazkir, Sibel Seda

2017-01-01

We explored how beginning-level interior architecture students develop skills to create mental visualizations of three-dimensional objects and environments, how they develop their technical drawing skills, and whether or not physical and computer generated models aid this design process. We used interviews and observations to collect data. The…

Planning and Implementing Technical Services Workstations.

ERIC Educational Resources Information Center

Kaplan, Michael, Ed.

The job of the library cataloger has grown increasingly complex. Catalogers must draw from a vast pool of dynamic information as they handle traditional and new forms of media. Technical Services Workstations (TSWs) provide catalogers the network data, application programs, and standard hardware required to catalog all types of media quickly and…

Outsiders Looking In: Tutor Expertise in Engineering Writing

ERIC Educational Resources Information Center

Bengesai, Annah

2015-01-01

Drawing on an academic literacies approach, this article explores the representations of technical communication by non-content expert tutors teaching the Technical Communication for Engineering course at a South African university. The course is offered to all first year engineering students as a developmental academic literacy course. It is…

Students' Views about Disease Concept: Drawing and Writing Technique

ERIC Educational Resources Information Center

Isik, Ebru; Çetin, Gülcan; Özarslan, Murat

2017-01-01

This study was aimed to determine ninth grade students' views about disease concept by a drawing and writing technique. Participants consisted of 81 ninth grade students in a Technical and Industrial Vocational School in Kocaeli, Turkey. The study was conducted in spring semester of 2009-2010 academic year after Health Concept Unit in Health…

Dismantling the Built Drawing: Working with Mood in Architectural Design

ERIC Educational Resources Information Center

Teal, Randall

2010-01-01

From the late Middle Ages onward an emphasis on the rational and the technical aspects of design and design drawing gained hold of architectural practice. In this transformation, the phenomenon of mood has been frequently overlooked or seen as something to be added on to a design; yet the fundamental grounding of mood, as described in Martin…

Up to the Challenge: The Role of Career and Technical Education and 21st Century Skills in College and Career Readiness

ERIC Educational Resources Information Center

Partnership for 21st Century Skills, 2010

2010-01-01

This report highlights the demand for skills in the global economy and the ways in which educators can meet this demand by drawing on both career and technical education and the Partnership for 21st Century Skills' Framework for 21st Century Learning. Twenty-first century skills and career and technical education are essential in every state,…

Leo Szilard Lectureship Award: Science Matters - Technical Dimensions of Arms Control and Non-Proliferation Agreements

NASA Astrophysics Data System (ADS)

Timbie, James

2017-01-01

Agreements to reduce nuclear arms and prevent proliferation of nuclear weapons are technical as well as political documents. They must be both technically sound and politically acceptable. This presentation illustrates technical aspects of arms control and non-proliferation agreements, with examples from SALT I, INF, the HEU Agreement, START, and the Iran nuclear negotiations, drawing on 44 years of personal experience in the negotiation of these agreements. The lecture is designed to convey an appreciation of the role that individuals with technical training can play in diplomatic efforts to reduce nuclear forces and prevent nuclear proliferation.

Cluster: Drafting. Course: Basic Technical Drafting. Research Project.

ERIC Educational Resources Information Center

Sanford - Lee County Schools, NC.

The set of six units is designed for use with an instructor in basic technical drafting and is also keyed to other texts. Each unit contains several task packages specifying prerequisites, rationale for learning, objectives, learning activities to be supervised by the instructor, and learning practice. The units cover: pictorial drawing; screw…

Factors That Promote Motivation and Academic Engagement in a Career Technical Education Context

ERIC Educational Resources Information Center

Loera, Gustavo; Nakamoto, Jonathan; Oh, Youn Joo; Rueda, Robert

2013-01-01

Drawing on social cognitive theory, this study examined the relationship between student and school-based factors (e.g., educational aspirations, quality of the program of study, and adults' impact on college enrollment) and students' academic engagement and satisfaction with student life in a career technical education (CTE) setting. This study…

Printing/Graphic Arts Technology. Curriculum Guide. Invest in Success.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

Under the Idaho state system for curriculum development in vocational education, Technical Committees made up solely of industry personnel are responsible for drawing up task lists for each program. A Technical Committee Report is prepared on completion of the Committee's assignment. This report presents a task list that reflects current trends…

32 CFR 518.21 - Collection of fees and fee rates for technical data.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AID OF CIVIL AUTHORITIES AND PUBLIC RELATIONS THE FREEDOM OF INFORMATION ACT PROGRAM Fee Schedule..., blueprints, and other technical engineering documents 2.50 Engineering data (microfilm) a. Aperture cards... mm roll film, per frame .45 d. Paper prints (engineering drawings), each 1.50 e. Paper reprints of...

An Inventory of Skills and Knowledge Necessary for a Career as a Nurse's Aide.

ERIC Educational Resources Information Center

Hawaii State Board for Vocational Education, Honolulu.

In September 1985, the State Board for Vocational Education in Hawaii, in conformance with federal mandates, established technical committees to assess the entry-level employment requirements for a number of occupations. Drawing from an examination of relevant curriculum materials, the Statewide Technical Committee on Health Services developed an…

Cost Reduction Through the Use of Additive Manufacturing (3d Printing) and Collaborative Product Life Cycle Management Technologies to Enhance the Navy’s Maintenance Programs

DTIC Science & Technology

2013-09-01

the order from the DLA; convenes a meeting with tech librarians , engineers, machinists, quality assurance (QA) inspectors, and mechanics to assess...created, begins the in-house process. 3. Research of Technical Drawings The tech librarian reviews the applicable repository for any tech drawings...applicable to Widget A. If none are found, the tech librarian contacts the OEM and other D-Level activities to find out whether the tech drawing is out

Multimedia as a Means to Enhance Teaching Technical Vocabulary to Physics Undergraduates in Rwanda

ERIC Educational Resources Information Center

Rusanganwa, Joseph

2013-01-01

This study investigates whether the integration of ICT in education can facilitate teaching and learning. An example of such integration is computer assisted language learning (CALL) of English technical vocabulary by undergraduate physics students in Rwanda. The study draws on theories of cognitive load and multimedia learning to explore learning…

Measure for Measure: A Guide to Metrication for Workshop Crafts and Technical Studies.

ERIC Educational Resources Information Center

Schools Council, London (England).

This booklet is designed to help teachers of the industrial arts in Great Britain during the changeover to metric units which is due to be substantially completed during the period 1970-1975. General suggestions are given for adapting equipment in metalwork and engineering and woodwork and technical drawing by adding some metric equipment…

Technical Feasibility of a Mobile Context-Aware (Social) Learning Schedule Framework

ERIC Educational Resources Information Center

Yau, Jane Y. K.; Joy, Mike

2013-01-01

The purpose of this paper is to show the technical feasibility of implementing their mobile context-aware learning schedule (mCALS) framework as a software application on a mobile device using current technologies, prior to its actual implementation. This process draws a set of compatible mobile and context-aware technologies at present and can be…

Interpretive Discourse and Other Models from Communication Studies: Expanding the Values of Technical Communication

ERIC Educational Resources Information Center

Williams, Sean D.

2010-01-01

This article argues that in spite of some attempts to expand the diversity of approaches in Technical Communication, the field remains rooted in an expedient, managerial, techno-rational discourse, where discourse is understood as the values that guide research, practice, and teaching. The article draws on approaches from Communication Studies,…

Milwaukee Area Technical College's Fiscal Condition: Growing Demand, Shrinking Resources. An Independent Third-Party Analysis

ERIC Educational Resources Information Center

Day, Douglass; Allen, Vanessa; Henken, Rob

2010-01-01

The Milwaukee Area Technical College (MATC) is one of the largest local taxpayer-funded entities in southeastern Wisconsin, ranking fourth in assets and budget behind Milwaukee County, the Milwaukee Public Schools, and the City of Milwaukee. The college's fiscal operations are complex and draw on multiple revenue sources, including nearly $150…

Curriculum Policy Reform in an Era of Technical Accountability: "Fixing" Curriculum, Teachers and Students in English Schools

ERIC Educational Resources Information Center

Winter, Christine

2017-01-01

Drawing on a Levinasian ethical perspective, the argument driving this paper is that the technical accountability movement currently dominating the educational system in England is less than adequate because it overlooks educators' responsibility for ethical relations in responding to difference in respect of the other. Curriculum policy makes a…

The Use of Workforce Assessment as a Component of Career and Technical Education Program Evaluation

ERIC Educational Resources Information Center

Bartlett, Kenneth R.; Schleif, Nicole L.; Bowen, Mauvalyn M.

2011-01-01

This research project examined the extent to which Career and Technical Education (CTE)-related programs use workforce needs assessment as a component of their evaluation activities. An employer perspective was used to develop a conceptual framework drawing on strategic human resource management theory. The extent and methods utilized for…

Representation of dental care and oral health in children's drawings.

PubMed

Torriani, D D; Goettems, M L; Cademartori, M G; Fernandez, R R; Bussoletti, D M

2014-06-01

Paediatric dentistry requires knowledge of preventive measures, restorative skills and an understanding of child development. This exploratory, descriptive and qualitative study has analysed children's drawings regarding their perception of dental treatment and oral health. Children aged from six to ten years attending a dental school for treatment were randomly invited to create a drawing about 'dental treatment' and 'oral health'. Verbal expressions made by the children whilst drawing were also recorded and attached to the drawings. These representations were analysed and categorised using Vygotsky postulations for context reading. During the drawing analysis different themes emerged. Five categories regarding perceptions of dental treatment were identified: personal relationship; power relation; trauma; childhood resistance; and contextualisation of dental care in the child's life. Three categories relating to oral health were determined: dichotomy of health/sickness; ludic representation of health; and sickness seen as a process. Drawing can be used to understand children's emotions and expectations about dental treatment. Besides possessing technical skills and scientific knowledge, dentists have an obligation to pay attention to children's feelings.

Drawing on Technical Writing Scholarship for the Teaching of Writing to Advanced ESL Students--A Writing Tutorial

ERIC Educational Resources Information Center

Zielinska, Dorota

2003-01-01

The article outlines the technical writing tutorial (TWT) that preceded an advanced ESL writing course for students of English Philology at the Jagiellonian University. Having assessed the English skills of those students at the end of the semester, we found a statistically significant increase in the performance of the students who had taken the…

48 CFR 35.011 - Data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 35.011 Data. (a) R&D contracts shall specify the technical..., drawings, specifications, and other descriptive information) that can be used to achieve competition in...

48 CFR 35.011 - Data.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 35.011 Data. (a) R&D contracts shall specify the technical..., drawings, specifications, and other descriptive information) that can be used to achieve competition in...

48 CFR 35.011 - Data.

Code of Federal Regulations, 2012 CFR

2012-10-01

... CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 35.011 Data. (a) R&D contracts shall specify the technical..., drawings, specifications, and other descriptive information) that can be used to achieve competition in...

48 CFR 35.011 - Data.

Code of Federal Regulations, 2014 CFR

2014-10-01

... CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 35.011 Data. (a) R&D contracts shall specify the technical..., drawings, specifications, and other descriptive information) that can be used to achieve competition in...

48 CFR 35.011 - Data.

Code of Federal Regulations, 2013 CFR

2013-10-01

... CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 35.011 Data. (a) R&D contracts shall specify the technical..., drawings, specifications, and other descriptive information) that can be used to achieve competition in...

Exploratory study of the relations between spatial ability and drawing from memory.

PubMed

Czarnolewski, Mark Y; Eliot, John

2012-04-01

Test scores of 119 students, attending either a public four-year college or a technical school, were related to their proportionality and detail drawing scores on the Memory for Designs Test. In regression models, the ETS Maze Tracing, Eliot-Price Mental Rotations, and Bender-Gestalt tests were consistent predictors of proportionality scores, with the latter two tests uniquely related to these. The ETS Shapes Memory Test and the Form Board Test were the strongest predictors for detail accuracy scores. The Shapes test predicted proportionality when the CTY Visual Memory Test BB was excluded. The models then provided support for the hypothesis that drawing designs from memory, a critical skill in drawing, regardless of whether one focuses on accuracy for proportionality scores or for detail scores, is jointly related to the measures of recognition, production, and traditional spatial ability measures. This study identified multifaceted skills in drawing from memory.

Problems of Technical Standards Teaching in the Context of the Globalization and Euro-Integration in Higher Education System of Ukraine

ERIC Educational Resources Information Center

Kornuta, Olena; Pryhorovska, Tetiana

2015-01-01

Globalization and Ukraine association with EU imply including Ukrainian universities into the world scientific space. The aim of this article is to analyze the problem of drawing standards teaching, based on the experience of Ivano-Frankivsk National Technical University of Oil and Gas (Ukraine) and to summarize the experience of post Soviet…

Sharing up, down, and Sideways: Alliance Is a Driving Force in Reshaping New Jersey Vocational School

ERIC Educational Resources Information Center

von Frank, Valerie

2011-01-01

In Essex County, New Jersey, whose county seat is Newark, students have the option of attending one of four vocational high schools. The Essex County Vocational School District draws students from the county seeking instruction in a multitude of career and technical areas. North 13th Street Technical School is one of the four vocational options.…

A Summary of Selected National Data Pertaining to Community, Technical, and Junior Colleges. Appendix for AACJC Statistical Yearbook 1988.

ERIC Educational Resources Information Center

American Association of Community and Junior Colleges, Washington, DC.

Drawing from data collected by the American Association of Community and Junior Colleges, as well as government and other publications from 1987-88, this report presents a statistical portrait of the community, technical, and junior colleges in the United States. Data are provided on the following topics: (1) the number of two-year colleges in…

Review of Final Year MSP Evaluations, Performance Period 2007. Analytic and Technical Support for Mathematics and Science Partnerships

ERIC Educational Resources Information Center

Bobronnikov, Ellen; Rhodes, Hilary; Bradley, Cay

2010-01-01

This final report culminates the evaluation and technical assistance provided for the U.S. Department of Education's Mathematics and Science Partnership (MSP) Program and its projects since 2005. As part of this support, Abt Associates looked across the portfolio of projects funded by the MSP program to draw lessons on best practices. This…

The Significance of Social Relationships in Learning to Become a Vocational and Technical Education Teacher: A Case Study of Three Individuals

ERIC Educational Resources Information Center

Goh, Adeline Yuen Sze

2013-01-01

This article about workplace learning examines the learning of individuals in becoming a Vocational and Technical Education (VTE) teacher in Brunei. Drawing on research findings from a group of student teachers, it presents case study accounts of three individuals to illustrate the importance of social relationships in learning to become a VTE…

Sixty years of dynamic examination of drawings.

PubMed

Hárdi, István

2010-01-01

Dynamic examination of drawing is a serial-comparative follow-up of drawings asking the patients to draw a person and an animal, - before, during the course and after - the treatment. We follow and compare clinical, psychopathological changes with the graphic ones based on dynamic psychopathologic processes. The material collected over 60 years consists of 85714 drawings, with 4710 series, including extended time observation of more than 10 years with 454 patients. Contrary to projective-associative methods, the emphasis here is placed on the changes of formal, dynamic elements and afterwards on the content. Some aspects of our evaluation are the following: alterations of line, impoverishment-enrichment, disproportion-proportion, deformation-harmony, deficiency-completeness, regression progression, and reintegration. Personality levels of drawings is one of the most important category, various types of adult drawings similar but not identical to children developmental phases of drawings. By the aid of personality levels of drawings comparison of the members of series regression could be more precisely stated, just as the grade of recovery. Dynamic examination of drawing has been practiced in outpatient and inpatient circumstances, differing from the atelier situation. It does not need special expensive technical equipments, or conditions and you can use it for evaluating pathologic and therapeutic processes, states and progression.

Descriptive Geometry Visualized

ERIC Educational Resources Information Center

Brundage, Joe R.

1970-01-01

The author has microfilmed chalkboard drawings of problem solutions and employed the individualized frames as slides for projection. Copies are availabe to Arizona junior college technical drafting departments from the State Department of Education. (JK)

Synthesis of Commercial Products from Copper Wire-Drawing Waste

NASA Astrophysics Data System (ADS)

Ayala, J.; Fernández, B.

2014-06-01

Copper powder and copper sulfate pentahydrate were obtained from copper wire-drawing scale. The hydrometallurgical recycling process proposed in this article yields a high-purity copper powder and analytical grade copper sulfate pentahydrate. In the first stage of this process, the copper is dissolved in sulfuric acid media via dismutation of the scale. In the second stage, copper sulfate pentahydrate is precipitated using ethanol. Effects such as pH, reaction times, stirring speed, initial copper concentration, and ethanol/solution volume ratio were studied during the precipitation from solution reaction. The proposed method is technically straightforward and provides efficient recovery of Cu from wire-drawing scale.

SOUTH FIRE HOUSE, ELEVATIONS AND DETAILS, BUILDING NO. 726. Navy ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SOUTH FIRE HOUSE, ELEVATIONS AND DETAILS, BUILDING NO. 726. Navy Yard, Mare Island, CA. Y & D (Yards and Docks) drawing no. 282851, approved October 23, 194_ (year not given); file no. 726-CR-2; stamped "Record drawing to accompany technical report on contract no. 4550, project no. 16." Various scales. 71 cm x 86 cm. Ink on vellum. - Mare Island Naval Shipyard, South Fire Station, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

Making KYTC geotechnical reports available on the web.

DOT National Transportation Integrated Search

2006-06-01

The Geotechnical Branch of the Kentucky Transportation Cabinet (KYTC) prepares technical reports that contain drawings, explanations, and recommendations for road and structure construction projects in Kentucky. These design reports, once complete, a...

Support Equipment Management in the F/A-18 Program

DTIC Science & Technology

1986-12-01

or character (such as manuals and drawings) of a scientific or technical nature. Computer programs and related software are not technical data...documentation of computer programs and related software are. Also excluded are financial data or other information related to contract administration. 6...management in the F/A-18 program . Graeser, Kenneth S. http://hdl.handle.net/10945/22133 Downloaded from NPS Archive: Calhoun NAVAL POSTGRADUATE SCHOOL Monterey

SOUTH FIRE HOUSE, PLANS AND DETAILS, BUILDING NO. 726 (Also ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SOUTH FIRE HOUSE, PLANS AND DETAILS, BUILDING NO. 726 (Also includes a plot plan). Navy Yard, Mare Island, CA. Y & D (Yards and Docks) drawing no. 282850, approved October 23, 194_ (year not given); file no. 726-CR-1; stamped "Record drawing to accompany technical report on contract no. 4550, project no. 16." Various scales. 71 cm x 86 cm. Ink on vellum. - Mare Island Naval Shipyard, South Fire Station, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

SOUTH FIRE HOUSE, FIRST FLOOR FRAMING AND DETAILS, BUILDING NO. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SOUTH FIRE HOUSE, FIRST FLOOR FRAMING AND DETAILS, BUILDING NO. 726 (Also includes a foundation plan). Navy Yard, Mare Island, CA. Y & D (Yards & Docks) drawing no. 282852, approved October 22, 194_ (year not given); file no. 726-S-1; stamped "Record drawing to accompany technical report on contract no. 4550, project no. 16." Various scales. 71 cm x 86 cm. Ink on vellum. - Mare Island Naval Shipyard, South Fire Station, Railroad Avenue near Eighteenth Street, Vallejo, Solano County, CA

Proceedings of the 1983 SPC/IREAPS Technical Symposium: Volume 1, Improving Shipbuilding Productivity. Held in Boston, MA on 23-25 August 1983

DTIC Science & Technology

1983-08-25

currently available Westinghouse CAE capabilities include plant layout, piping design, piping analysis , support/hanger design, and drawing preparation. The...considerations involved with the design and analysis of piping and support systems and space management in nuclear power plants are very similar to...piping analysis system can obtain input defini- tion data either from the plant modeling system or from piping drawings (for systems not designed using

National Training Center (NTC) Analysis

DTIC Science & Technology

1981-05-29

CONTRACT FOR S100K NTC CONCEPT STUDY PRESENTATION TO DARPA/TRADOC SIOOK ADD- ON FOR FURTHER NTC CONCEPT DEVELOPMENT SAI CONCEPT FOR 1-ALPHA...Technical Report 29 May 1981 I I I This document is submitted in fulfillment of contract No. DAAK 40-78-C-0198. It is the final report on Phase 1...many technical reports have been published previously. This report draws on these earlier reports and presents a comprehensive summary and overview

Building Science-Relevant Literacy with Technical Writing in High School

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

2006-06-02

By drawing on the in-class work of an on-going literacy outreach project, this paper explains how well-chosen technical writing activities can earn time in high-school science courses by enabling underperforming students (including ESL students) to learn science more effectively. We adapted basic research-based text-design and usability techniques into age-appropriate exercises and cases using the cognitive apprenticeship approach. This enabled high-school students, aided by explicit guidelines, to build their cognitive maturity, learn how to craft good instructions and descriptions, and apply those skills to better note taking and technical talks in their science classes.

A novel highly flexible, simple, rapid and low-cost fabrication tool for paper-based microfluidic devices (μPADs) using technical drawing pens and in-house formulated aqueous inks.

PubMed

Nuchtavorn, Nantana; Macka, Mirek

2016-05-05

Paper-based microfluidic devices (μPADs) are capable of achieving rapid quantitative measurements of a variety of analytes inexpensively. μPADs rely on patterning hydrophilic-hydrophobic regions on a sheet of paper in order to create capillary channels within impermeable fluidic brakes on the paper. Here, we present a novel, highly flexible and low-cost fabrication method using a desktop digital craft plotter/cutter and technical drawing pens with tip size of 0.5 mm. The pens were used with either commercial black permanent ink for drawing fluidic brakes, or with specialty in-house formulated aqueous inks. With the permanent marker ink it was possible to create barriers on paper rapidly and in a variety of designs in a highly flexible manner. For instance, a design featuring eight reservoirs can be produced within 10 s for each μPAD with a consistent line width of brakes (%RSD < 1.5). Further, we investigated the optimal viscosity range of in-house formulated inks controlled with additions of poly(ethylene glycol). The viscosity was measured by capillary electrophoresis and the optimal viscosity was in the range of ∼3-6 mPa s. A functional test of these μPADs was conducted by the screening of antioxidant activity. Colorimetric measurements of flavonoid, phenolic compounds and DPPH free radical scavenging activity were carried out on μPADs. The results can be detected by the naked eye and simply quantified by using a camera phone and image analysis software. The fabrication method using technical drawing pens provides flexibility in the use of in-house formulated inks, short fabrication time, simplicity and low cost. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.

Motor Inhibition Test: Technical Report 13. Disadvantaged Children and Their First School Experiences. ETS-Head Start Longitudinal Study. Technical Report Series.

ERIC Educational Resources Information Center

Ward, William C.

The Motor Inhibition Test, which measures "impulse control," requires the child to perform three motor acts. These acts are: walking a distance of six feet on a five-ince wide runway; drawing a line, using ruler and pencil, between two points 8-1/2 inches apart; and winding a toy jeep up to the rear of a toy two truck, a distance of 30…

Reusing Cleaned Up Superfund Sites: Ecological Use Where Waste is Left on Site

EPA Pesticide Factsheets

The report draws from experiences at completedand current reuse projects, EPA technical guidance, and other sources to describe ecosystem characteristics and remediation approaches that have been used to accommodate ecological usesat Superfund sites wher

33 CFR 149.620 - What happens when the Commandant (CG-5) reviews and evaluates the construction drawings and...

Code of Federal Regulations, 2012 CFR

2012-07-01

... Marine Safety Center and other Federal agencies having technical expertise, such as the Pipeline and Hazardous Materials Safety Administration and the Federal Energy Regulatory Commission, in order to ensure...

33 CFR 149.620 - What happens when the Commandant (CG-5) reviews and evaluates the construction drawings and...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Marine Safety Center and other Federal agencies having technical expertise, such as the Pipeline and Hazardous Materials Safety Administration and the Federal Energy Regulatory Commission, in order to ensure...

33 CFR 149.620 - What happens when the Commandant (CG-5) reviews and evaluates the construction drawings and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Marine Safety Center and other Federal agencies having technical expertise, such as the Pipeline and Hazardous Materials Safety Administration and the Federal Energy Regulatory Commission, in order to ensure...

MONTHLY PROGRESS REPORT ON THE FEASIBILITY AND DESIGN STUDY FOR COLLECTIVE PROTECTION EQUIPMENT FOR THE AN/MSG-4 SYSTEM. PHASEIA. Technical Report, April 15 to May 30, 1962 (1st Report). Financial Report, April 15 to May 30, 1962 (1st Report). GSG Report No. 1663.00/54

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glaser, J.

1962-06-19

Initial efforts devoted to development of layout drawings of the protective equipment from which detailed fabrication drawings are to be established are reported. Collective protection equipment design progress is reported on 400- and 800-cfm filter units and on protective entrances for shelters and vehicles. (J.R.D.)

Orbital debris: A technical assessment

NASA Technical Reports Server (NTRS)

Gleghorn, George; Asay, James; Atkinson, Dale; Flury, Walter; Johnson, Nicholas; Kessler, Donald; Knowles, Stephen; Rex, Dietrich; Toda, Susumu; Veniaminov, Stanislav

1995-01-01

To acquire an unbiased technical assessment of (1) the research needed to better understand the debris environment, (2) the necessity and means of protecting spacecraft against the debris environment, and (3) potential methods of reducing the future debris hazard, NASA asked the National Research Council to form an international committee to examine the orbital debris issue. The committee was asked to draw upon available data and analyses to: characterize the current debris environment, project how this environment might change in the absence of new measures to alleviate debris proliferation, examine ongoing alleviation activities, explore measures to address the problem, and develop recommendations on technical methods to address the problems of debris proliferation.

48 CFR 36.102 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS General 36.102 Definitions. As used in this part— Contract is intended to refer to a contract for construction or a contract for architect-engineer services..., structural, electrical, mechanical, and fire protection), producing the technical specifications and drawings...

48 CFR 36.102 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS General 36.102 Definitions. As used in this part— Contract is intended to refer to a contract for construction or a contract for architect-engineer services..., structural, electrical, mechanical, and fire protection), producing the technical specifications and drawings...

48 CFR 36.102 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS General 36.102 Definitions. As used in this part— Contract is intended to refer to a contract for construction or a contract for architect-engineer services..., structural, electrical, mechanical, and fire protection), producing the technical specifications and drawings...

48 CFR 36.102 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS General 36.102 Definitions. As used in this part— Contract is intended to refer to a contract for construction or a contract for architect-engineer services..., structural, electrical, mechanical, and fire protection), producing the technical specifications and drawings...

48 CFR 36.102 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS General 36.102 Definitions. As used in this part— Contract is intended to refer to a contract for construction or a contract for architect-engineer services..., structural, electrical, mechanical, and fire protection), producing the technical specifications and drawings...

33 CFR 149.620 - What happens when the Commandant (CG-5P) reviews and evaluates the construction drawings and...

Code of Federal Regulations, 2014 CFR

2014-07-01

... Marine Safety Center and other Federal agencies having technical expertise, such as the Pipeline and Hazardous Materials Safety Administration and the Federal Energy Regulatory Commission, in order to ensure...

33 CFR 149.620 - What happens when the Commandant (CG-5P) reviews and evaluates the construction drawings and...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Marine Safety Center and other Federal agencies having technical expertise, such as the Pipeline and Hazardous Materials Safety Administration and the Federal Energy Regulatory Commission, in order to ensure...

Solar Technical Assistance Team 2012 Webinars | State, Local, and Tribal

Science.gov Websites

sessions are available: What a Successful Solar Market Can Do for You Solar Economics for Policymakers Market? Policy Environments That Draw Manufacturers and Create Jobs Regulatory Strategies for Driving the Distributed Solar Market

Application for certification 1988 model year light-duty vehicles - US Technical Research Company (Peugeot)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings that describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems, and exhaust and evaporative emission control systems.

Automation in the Teaching of Descriptive Geometry and CAD. High-Level CAD Templates Using Script Languages

NASA Astrophysics Data System (ADS)

Moreno, R.; Bazán, A. M.

2017-10-01

The main purpose of this work is to study improvements to the learning method of technical drawing and descriptive geometry through exercises with traditional techniques that are usually solved manually by applying automated processes assisted by high-level CAD templates (HLCts). Given that an exercise with traditional procedures can be solved, detailed step by step in technical drawing and descriptive geometry manuals, CAD applications allow us to do the same and generalize it later, incorporating references. Traditional teachings have become obsolete and current curricula have been relegated. However, they can be applied in certain automation processes. The use of geometric references (using variables in script languages) and their incorporation into HLCts allows the automation of drawing processes. Instead of repeatedly creating similar exercises or modifying data in the same exercises, users should be able to use HLCts to generate future modifications of these exercises. This paper introduces the automation process when generating exercises based on CAD script files, aided by parametric geometry calculation tools. The proposed method allows us to design new exercises without user intervention. The integration of CAD, mathematics, and descriptive geometry facilitates their joint learning. Automation in the generation of exercises not only saves time but also increases the quality of the statements and reduces the possibility of human error.

14 CFR 21.293 - Current records.

Code of Federal Regulations, 2010 CFR

2010-01-01

... option authorization— (i) A technical data file that includes the type design drawings, specifications, reports on tests prescribed by this part, and the original type inspection report and amendments to that... his factory, for each product type certificated under a delegation option authorization, current...

22 CFR 126.5 - Canadian exemptions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... such persons publicly available through the Internet Web site of the Directorate of Defense Trade... that a foreign consignee can produce a defense article from engineering drawings without any technical...); and does not include (v) Design methodology, such as: The underlying engineering methods and design...

Technical and Occupational Shops. Volume II.

ERIC Educational Resources Information Center

Ontario Dept. of Education, Toronto. School Planning and Building Research Section.

The layouts and specifications provided are intended as a guide to school boards, educators, and architects. Drawings and room plans illustrate specifications for girls' occupational shop, graphic arts, carpentry (millwork and building construction shop), boys' occupational shop (mechanical), boys' occupational shop (building construction),…

Spatial Visualization by Isometric View

ERIC Educational Resources Information Center

Yue, Jianping

2007-01-01

Spatial visualization is a fundamental skill in technical graphics and engineering designs. From conventional multiview drawing to modern solid modeling using computer-aided design, visualization skills have always been essential for representing three-dimensional objects and assemblies. Researchers have developed various types of tests to measure…

Development and Desire: A Postmodern Perspective.

ERIC Educational Resources Information Center

Hargreaves, Andy

Three theoretical perspectives guide this discussion of teacher development: symbolic interactionism, critical social theory, and theories of postmodernity. Drawing on these perspectives, key dimensions of teacher development can be addressed. Good teaching involves competence in technical skills, but it also involves moral purpose; emotional…

A Portuguese Spring

EPA Science Inventory

The author was in Portugal on a two-month Embassy Science Fellows Program [http://www.state.gov/g/oes/rls/fs/2003/17863.htm]. The U.S. State Department draws upon other federal agencies to provide scientific and technical expertise to American embassies around the world. Portugal...

Basic Drafting. Revised.

ERIC Educational Resources Information Center

Schertz, Karen

This introductory module on drafting includes the technical content and tasks necessary for a student to be employed in an entry-level drafting occupation. The module contains 18 instructional units that cover the following topics: introduction to drafting; tools and equipment; supplies and materials; sketching; scales; drawing format; lettering;…

48 CFR 252.236-7001 - Contract drawings and specifications.

Code of Federal Regulations, 2014 CFR

2014-10-01

... specifications. 252.236-7001 Section 252.236-7001 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text... publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by...

48 CFR 252.236-7001 - Contract drawings and specifications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... specifications. 252.236-7001 Section 252.236-7001 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text... publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by...

48 CFR 252.236-7001 - Contract drawings and specifications.

Code of Federal Regulations, 2013 CFR

2013-10-01

... specifications. 252.236-7001 Section 252.236-7001 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text... publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by...

48 CFR 252.236-7001 - Contract drawings and specifications.

Code of Federal Regulations, 2011 CFR

2011-10-01

... specifications. 252.236-7001 Section 252.236-7001 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text... publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by...

48 CFR 252.236-7001 - Contract drawings and specifications.

Code of Federal Regulations, 2012 CFR

2012-10-01

... specifications. 252.236-7001 Section 252.236-7001 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text... publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by...

7 CFR 1924.5 - Planning development work.

Code of Federal Regulations, 2014 CFR

2014-01-01

... cash to be furnished by the borrower, proceeds from cost sharing programs such as Agricultural...) Drawings, specifications, and estimates will fully describe the work. Technical data, tests, or engineering... building code. (i) Agricultural buildings that are not intended for human habitation are exempt from these...

7 CFR 1924.5 - Planning development work.

Code of Federal Regulations, 2013 CFR

2013-01-01

... cash to be furnished by the borrower, proceeds from cost sharing programs such as Agricultural...) Drawings, specifications, and estimates will fully describe the work. Technical data, tests, or engineering... building code. (i) Agricultural buildings that are not intended for human habitation are exempt from these...

7 CFR 1924.5 - Planning development work.

Code of Federal Regulations, 2012 CFR

2012-01-01

... cash to be furnished by the borrower, proceeds from cost sharing programs such as Agricultural...) Drawings, specifications, and estimates will fully describe the work. Technical data, tests, or engineering... building code. (i) Agricultural buildings that are not intended for human habitation are exempt from these...

Rationalizing the Promotion of Non-Rational Behaviors in Organizations.

ERIC Educational Resources Information Center

Smith, Peter A. C.; Sharma, Meenakshi

2002-01-01

Organizations must balance rational/technical efficiency and emotions. Action learning has been proven to be effective for developing emotional openness in the workplace. Facilitators of action learning should draw upon the disciplines of counseling, Gestalt, psychodynamics, and Eastern philosophies. (Contains 23 references.) (SK)

Managing the Community College with an Entrepreneurial Spirit.

ERIC Educational Resources Information Center

Kotula, John R.; Decker, Henry J.

Drawing from experiences at Delaware Technical and Community College (DTCC), these papers discuss the institution's entrepreneurial approach to two aspects of college administration: developing relationships with business and industry, and management planning. Entrepreneurship is defined as the ability to find and evaluate opportunities, locate…

49 CFR 572.141 - General description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 3-year-Old Child Crash Test Dummy, Alpha Version § 572.141 General description. (a) The Hybrid III 3-year-old child dummy is described by the following materials: (1) Technical drawings and specifications package 210-0000 (refer to...

The Emergence of Dominant Design(s) in Large Scale Cyber-Infrastructure Systems

ERIC Educational Resources Information Center

Diamanti, Eirini Ilana

2012-01-01

Cyber-infrastructure systems are integrated large-scale IT systems designed with the goal of transforming scientific practice by enabling multi-disciplinary, cross-institutional collaboration. Their large scale and socio-technical complexity make design decisions for their underlying architecture practically irreversible. Drawing on three…

Articulation Workshop in Drafting. Final Report.

ERIC Educational Resources Information Center

Catonsville Community Coll., MD.

Drafting students from vocational/technical and high schools frequently repeat the same experiences and courses and work with the same instructional materials when they enroll in college engineering drawing, and architecture programs. In order to minimize needless repetition and address the problem of articulation between such schools and the…

Data Development of Detail Standards For Outside Machinery Operations

DTIC Science & Technology

1985-01-01

the preparation of food . oven operates differently than the conventional free heat The convection oven forces the heat to circulate by the For the...that the product at the various stages meets quality and technical workmanship established by drawings, Manufact - uring Standard Processes, as well as

Field guide to Intermountain rushes

Treesearch

Emerenciana G. Hurd; Sherel Goodrich; Nancy L. Shaw

1994-01-01

This guide provides technical descriptions of 23 lntermountain rushes (Juncus spp.), including the common and several less abundant species. Line drawings and color or black and white photos illustrate diagnostic characteristics of each species. An illustrated morphology and a glossary acquaint the layperson with terminology used to classify rushes....

The Subjectivities of "Included" Students with Disabilities in Schools

ERIC Educational Resources Information Center

Whitburn, Ben

2017-01-01

The contextual precept of this paper is to re-theorise inclusive education beyond technical rational solutions to the "problem" of disability. Drawing on Foucauldian and critical disability theories, I make the case for the analysis of inclusive schooling through the lens of students' "included" subjectivities--notwithstanding…

Synthetic biology and the technicity of biofuels.

PubMed

Mackenzie, Adrian

2013-06-01

The principal existing real-world application of synthetic biology is biofuels. Several 'next generation biofuel' companies-Synthetic Genomics, Amyris and Joule Unlimited Technologies-claim to be using synthetic biology to make biofuels. The irony of this is that highly advanced science and engineering serves the very mundane and familiar realm of transport. Despite their rather prosaic nature, biofuels could offer an interesting way to highlight the novelty of synthetic biology from several angles at once. Drawing on the French philosopher of technology and biology Gilbert Simondon, we can understand biofuels as technical objects whose genesis involves processes of concretisation that negotiate between heterogeneous geographical, biological, technical, scientific and commercial realities. Simondon's notion of technicity, the degree of concretisation of a technical object, usefully conceptualises this relationality. Viewed in terms of technicity, we might understand better how technical entities, elements, and ensembles are coming into being in the name of synthetic biology. The broader argument here is that when we seek to identify the newness of disciplines, their newness might be less epistemic and more logistic. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

"Technical note. Harmonization of the multi-scale multi-model activities HTAP, AQMEII and MICS-Asia: simulations, emission inventories, boundary conditions and output formats." For submission to ACP Special Issue on "Global and regional assessment of intercontinental transport of air pollution: results from HTAP, AQMEII and MICS"

EPA Science Inventory

The ACP Special Issue is being organized to draw together analysis of a set of cooperative modeling experiments (referred to as HTAP2). The purpose of this technical note is to provide a common description of the experimental design and set up for HTAP2 that can be referred to b...

Designing for Mathematical Abstraction

ERIC Educational Resources Information Center

Pratt, Dave; Noss, Richard

2010-01-01

Our focus is on the design of systems (pedagogical, technical, social) that encourage mathematical abstraction, a process we refer to as "designing for abstraction." In this paper, we draw on detailed design experiments from our research on children's understanding about chance and distribution to re-present this work as a case study in designing…

Beyond "What Works": Understanding Teacher Identity as a Practical and Political Tool

ERIC Educational Resources Information Center

Mockler, Nicole

2011-01-01

Drawing on previous research that focused upon the formation and mediation of teacher professional identity, this paper develops a model for conceptualising teacher professional identity. Increasingly, technical-rational understandings of teachers' work and "role" are privileged in policy and public discourse over more nuanced and holistic…

Seat Belts in School Buses: A Technical Analysis of the Literature.

ERIC Educational Resources Information Center

Splaine, Pam; Frankel, Steven M.

This report, prepared for the Montgomery County (Maryland) Public Schools superintendent and board members, identifies the questions concerning seat belt use in school buses, examines relevant literature, and draws some conclusions. According to the literature, seat belts are one of many alternative and interdependent safety devices built into…

Drafting. A Bilingual Text = Dibujo Mecanico. Un Texto Bilingue.

ERIC Educational Resources Information Center

Los Angeles Unified School District, CA. Div. of Career and Continuing Education.

This bilingual instructional text, one in a series of six texts covering various vocational and technical topics, provides secondary level English and Spanish instruction in drafting. Addressed in the individual units are the following topics: safety, drafting tools and techniques, sketching, geometric construction, working drawings, sectioning,…

RoMPS concept review automatic control of space robot

NASA Technical Reports Server (NTRS)

1991-01-01

The Robot operated Material Processing in Space (RoMPS) experiment is being performed to explore the marriage of two emerging space commercialization technologies: materials processing in microgravity and robotics. This concept review presents engineering drawings and limited technical descriptions of the RoMPS programs' electrical and software systems.

"Flexibility", Community and Making Parents Responsible

ERIC Educational Resources Information Center

McGowan, Wayne S.

2005-01-01

This article draws on Foucault's concept of governmentality to explore how recent political moves to legalise "flexibility" mobilises education authorities to make "community" a technical means of achieving the political objective of schooling the child. I argue that "flexibility" in this sense is a neo-liberal strategy that shifts relations…

Cultivating Conditions for Access: A Case for "Case-Making" in Graduate Student Preparation for Interdisciplinary Research

ERIC Educational Resources Information Center

Hannah, Mark A.; Arreguin, Alex

2017-01-01

Gaining access to interdisciplinary research sites poses unique research challenges to technical and professional communication scholars and practitioners. Drawing on applied experiences in externally funded interdisciplinary research projects and scholarship about interdisciplinary research, this article describes a training protocol for…

Essence or Practice? Conflicting Cultural Values in Chinese EFL Textbooks: A Discourse Approach

ERIC Educational Resources Information Center

Xiong, Tao

2012-01-01

While increasing attention is being paid to the ideological debate on Confucian-influenced cultural values communicated in Chinese language textbooks, EFL textbooks remain under-examined since the TEFL/TESOL is typically assumed to be "technical" and "neutral". Drawing on critical theoretical perspectives on curriculum,…

The Write Brain: How to Educate and Entertain with Learner-Centered Writing

ERIC Educational Resources Information Center

Iverson, Kathleen M.

2009-01-01

This article presents a conceptual framework for the writing process to facilitate motivation, learning, retention, and knowledge transfer in readers of expository material. Drawing from four well-developed bodies of knowledge--cognitive science, learning theory, technical communication, and creative writing--the author creates a model that allows…

Health Instruction Packages: Humanistic Nursing--Nurse/Patient Relations.

ERIC Educational Resources Information Center

Carpenter, Wanda L.; And Others

Text, illustrations, and exercises are utilized in this set of four learning modules to instruct nurses and nursing students in humanistic, non-technical aspects of patient care. The first module, "Introduction to Humanistic Nursing Practice Theory" by Wanda L. Carpenter, draws upon the theories of existentialism and phenomenology to…

44 CFR 5.3 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., designs, drawings, research data, computer programs, technical data packages, and the like, which are not... obligation to protect the property value of the material, as, for example, may be true for patent information.... (c) Agency. Agency, as defined in section 552(e) of title 5 U.S.C., includes any executive department...

44 CFR 5.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., designs, drawings, research data, computer programs, technical data packages, and the like, which are not... obligation to protect the property value of the material, as, for example, may be true for patent information.... (c) Agency. Agency, as defined in section 552(e) of title 5 U.S.C., includes any executive department...

44 CFR 5.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., designs, drawings, research data, computer programs, technical data packages, and the like, which are not... obligation to protect the property value of the material, as, for example, may be true for patent information.... (c) Agency. Agency, as defined in section 552(e) of title 5 U.S.C., includes any executive department...

44 CFR 5.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., designs, drawings, research data, computer programs, technical data packages, and the like, which are not... obligation to protect the property value of the material, as, for example, may be true for patent information.... (c) Agency. Agency, as defined in section 552(e) of title 5 U.S.C., includes any executive department...

Solid rocket booster thermal protection system materials development. [space shuttle boosters

NASA Technical Reports Server (NTRS)

Dean, W. G.

1978-01-01

A complete run log of all tests conducted in the NASA-MSFC hot gas test facility during the development of materials for the space shuttle solid rocket booster thermal protection system are presented. Lists of technical reports and drawings generated under the contract are included.

Transcription Tales or Let Not Love's Labour Be Lost

ERIC Educational Resources Information Center

Downs, Yvonne

2010-01-01

Drawing heavily on my MA dissertation but influenced by subsequent transcription experience, I relate how a technical problem in the recording of an interview necessitated deliberations on the nature and purpose of transcription that continue to have repercussions for my transcription practice and, furthermore, for my understanding of research as…

Nursing Assistant. Curriculum Guide. Invest in Success.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

Under the Idaho state system for curriculum development in vocational education, Technical Committees made up solely of industry personnel are responsible for drawing up task lists for each program. Based on a task list specific to the field, this curriculum guide provides the competencies needed by nursing assistants enrolled in postsecondary,…

Reclaiming "Sense" from "Cents" in Accounting Education

ERIC Educational Resources Information Center

Dellaportas, Steven

2015-01-01

This essay adopts an interpretive methodology of relevant literature to explore the limitations of accounting education when it is taught purely as a technical practice. The essay proceeds from the assumption that conventional accounting education is captured by a positivistic neo-classical model of decision-making that draws on economic rationale…

Parametric Pedagogy: Integrating Parametric CAD in Irish Post-Primary Schools

ERIC Educational Resources Information Center

McGarr, Oliver; Seery, Niall

2011-01-01

Technology education in Irish post-primary schools is undergoing significant change. In recent years the syllabi of all technology-related subjects have been revised. A new subject, Design and Communication Graphics, has replaced the traditional Technical Drawing subject. This new subject aims to develop students' spatial awareness and graphical…

NASA Hydrogen Peroxide Propellant Hazards Technical Manual

NASA Technical Reports Server (NTRS)

Baker, David L.; Greene, Ben; Frazier, Wayne

2005-01-01

The Fire, Explosion, Compatibility and Safety Hazards of Hydrogen Peroxide NASA technical manual was developed at the NASA Johnson Space Center White Sands Test Facility. NASA Technical Memorandum TM-2004-213151 covers topics concerning high concentration hydrogen peroxide including fire and explosion hazards, material and fluid reactivity, materials selection information, personnel and environmental hazards, physical and chemical properties, analytical spectroscopy, specifications, analytical methods, and material compatibility data. A summary of hydrogen peroxide-related accidents, incidents, dose calls, mishaps and lessons learned is included. The manual draws from art extensive literature base and includes recent applicable regulatory compliance documentation. The manual may be obtained by United States government agencies from NASA Johnson Space Center and used as a reference source for hazards and safe handling of hydrogen peroxide.

Energy utilization: municipal waste incineration. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

LaBeck, M.F.

An assessment is made of the technical and economical feasibility of converting municipal waste into useful and useable energy. The concept presented involves retrofitting an existing municipal incinerator with the systems and equipment necessary to produce process steam and electric power. The concept is economically attractive since the cost of necessary waste heat recovery equipment is usually a comparatively small percentage of the cost of the original incinerator installation. Technical data obtained from presently operating incinerators designed specifically for generating energy, documents the technical feasibility and stipulates certain design constraints. The investigation includes a cost summary; description of process andmore » facilities; conceptual design; economic analysis; derivation of costs; itemized estimated costs; design and construction schedule; and some drawings.« less

Research and Development for Technology Evolution Potential Forecasting System

NASA Astrophysics Data System (ADS)

Gao, Changqing; Cao, Shukun; Wang, Yuzeng; Ai, Changsheng; Ze, Xiangbo

Technology forecasting is a powerful weapon for many enterprises to gain an animate future. Evolutionary potential radar plot is a necessary step of some valuable methods to help the technology managers with right technical strategy. A software system for Technology Evolution Potential Forecasting (TEPF) with automatic radar plot drawing is introduced in this paper. The framework of the system and the date structure describing the concrete evolution pattern are illustrated in details. And the algorithm for radar plot drawing is researched. It is proved that the TEPF system is an effective tool during the technology strategy analyzing process with a referenced case study.

Curriculum and Resources: Computer Provision in a CTC.

ERIC Educational Resources Information Center

Denholm, Lawrence

The program for City Technical Colleges (CTCs) draws on ideas and resources from government, private industry, and education to focus on the educational needs of inner city and urban children. Mathematics, science, and technology are at the center of the CTCs' mission, in a context which includes economic awareness and a commitment to enterprise…

Innovative Mixed-Methods Research: Moving beyond Design Technicalities to Epistemological and Methodological Realizations

ERIC Educational Resources Information Center

Riazi, A. Mehdi

2016-01-01

Mixed-methods research (MMR), as an inter-discourse (quantitative and qualitative) methodology, can provide applied linguistics researchers the opportunity to draw on and integrate the strengths of the two research methodological approaches in favour of making more rigorous inferences about research problems. In this article, the argument is made…

Schools in the Making: Mapping Digital Spaces of Evidence

ERIC Educational Resources Information Center

Decuypere, Mathias; Ceulemans, Carlijne; Simons, Maarten

2014-01-01

In this article, the focus is on educational governing in the making. Drawing on conceptual underpinnings of socio-technical approaches, this implies an interest both on the way in which a sound knowledge base for policy measures is created, as on the distribution of that knowledge through publically available instruments. Governing by evidence…

Effectiveness of PowerPoint Presentation on Students' Cognitive Achievement in Technical Drawing

ERIC Educational Resources Information Center

Gambari, Amosa Isiaka; Yusuf, Hamdalat Taiwo; Balogun, Sherifat Adepeju

2015-01-01

This paper discusses importance of technology education and evidence of declining performance of junior secondary school students in basic technology subject. Benefits of PowerPoint presentation in classroom instruction as a means to improve classroom teaching in the developing countries are also discussed. The effectiveness of PowerPoint…

Blueprint Reading. Courseware Evaluation for Vocational and Technical Education.

ERIC Educational Resources Information Center

Turner, Gordon; And Others

This courseware evaluation rates the Blueprint Reading program developed by the Iowa Department of Public Instruction. (The program--not contained in this document--is self-paced and contains review questions to supplement instruction in blueprint reading and mechanical drawing.) Part A describes the program in terms of subject area (fractions,…

Multiple Theory Formation in High-Level Perception. Technical Report No. 38.

ERIC Educational Resources Information Center

Woods, William A.

This paper is concerned with the process of human reading as a high-level perceptual task. Drawing on insights from artificial-intelligence research--specifically, research in natural language processing and continuous speech understanding--the paper attempts to present a fairly concrete picture of the kinds of hypothesis formation and inference…

Opportunities for Research on the Organizational Impact of School Computers. Technical-Report-No. 7.

ERIC Educational Resources Information Center

Newman, Denis

As computers are acquired in greater numbers in schools, their impact on the social organization of instruction increasingly becomes an issue for research. Developments in the cognitive science of instruction, drawing on sociohistorical theory, provide researchers with an appropriate theoretical approach to cultural tools and cognitive change,…

Requirements for Remote RF Laboratory Applications: An Educators' Perspective

ERIC Educational Resources Information Center

Cagiltay, N. E.; Aydin, E.; Oktem, R.; Kara, A.; Alexandru, M.; Reiner, B.

2009-01-01

This paper discusses the results of a study of the requirements for developing a remote RF laboratory. This study draws on the perspectives of educators in university electrical engineering departments and in technical colleges, on the teaching of the radio frequency (RF) domain. The study investigates how these educators would like the technical…

Business Systems Specialist. Curriculum Guide. Invest in Success.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

Under the Idaho state system for curriculum development in vocational education, Technical Committees made up solely of industry personnel are responsible for drawing up task lists for each program. This curriculum guide contains a series of 27 modules that comprise the Idaho Program Standards for Business Systems Specialist. It begins with a…

Evaluation of the use of strobe lights in the red lens of traffic signals : technical assistance report.

DOT National Transportation Integrated Search

1994-11-01

The objective of this study was to evaluate the effectiveness of using strobe lights in the red lens of traffic signals and, if appropriate, to recommend guidelines for their use. Strobe lights are used as a supplement to the red lens to draw the att...

101 Things to Learn in Art School

ERIC Educational Resources Information Center

White, Kit

2011-01-01

What is the first thing to learn in art school? "Art can be anything." The second thing? "Learn to draw." With "101 Things to Learn in Art School", artist and teacher Kit White delivers and develops such lessons, striking an instructive balance between technical advice and sage concepts. These 101 maxims, meditations, and demonstrations offer both…

Characterization of Rain Attenuation and Depolarization at W/V Bands

DTIC Science & Technology

2015-07-30

AIR FORCE BASE , NM 87117-5776 DTIC COPY NOTICE AND SIGNATURE PAGE Using Government drawings, specifications, or other data included in this...WITH ASSIGNED DISTRIBUTION STATEMENT. //SIGNED// //SIGNED// STEVEN A. LANE PAUL HAUSGEN, Ph.D. Program Manager Technical Advisor, Space Based Advanced... Stations ........................................................................................ 11  Figure 3. Transmitter Block Diagram

Open-Source Learning Management Systems: A Predictive Model for Higher Education

ERIC Educational Resources Information Center

van Rooij, S. Williams

2012-01-01

The present study investigated the role of pedagogical, technical, and institutional profile factors in an institution of higher education's decision to select an open-source learning management system (LMS). Drawing on the results of previous research that measured patterns of deployment of open-source software (OSS) in US higher education and…

Sensors Technology and Advanced Signal Processing Concepts for Layered Warfare/Layered Sensing

DTIC Science & Technology

2010-04-01

for challenged environments will require contributions from many diverse technical disciplines across AFRL, the Air Force and beyond. By providing a...APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED. STINFO COPY AIR FORCE...UNITED STATES AIR FORCE AIR FORCE MATERIEL COMMAND NOTICE AND SIGNATURE PAGE Using Government drawings, specifications, or other data

Technical Boys and Creative Girls: The Career Aspirations of Digitally Skilled Youths

ERIC Educational Resources Information Center

Wong, Billy; Kemp, Peter E. J.

2018-01-01

Digital technology is increasingly central to our lives, particularly among young people. However, there remains a concern from government and businesses of a digital skills gap because many youths, especially girls, tend to be consumers rather than creators of technology. Drawing on 32 semi-structured interviews with digitally skilled teenagers…

Toward a Productive and Creative Curriculum in Architecture

ERIC Educational Resources Information Center

Wang, Tsungjuang

2009-01-01

A model of curriculum development that enables students of architecture in the developing nation of Taiwan to draw on their own life experiences in formulating their own architectural education is proposed. Such an ideology recognizes that while education certainly includes the acquisition of the technical skills needed to ply one's trade, its…

Collaborative Concept Mapping Activities in a Classroom Scenario

ERIC Educational Resources Information Center

Elorriaga, J. A.; Arruarte, A.; Calvo, I.; Larrañaga, M.; Rueda, U.; Herrán, E.

2013-01-01

The aim of this study is to test collaborative concept mapping activities using computers in a classroom scenario and to evaluate the possibilities that Elkar-CM offers for collaboratively learning non-technical topics. Elkar-CM is a multi-lingual and multi-media software program designed for drawing concept maps (CMs) collaboratively. Concept…

Container Design and Packaging; Art Education: 6693.13.

ERIC Educational Resources Information Center

Dubocq, Edward R.

Offered as an exploratory course in the highly technical field of container and packaging design, emphasis is placed on refined knowledge of the basic techniques used in preparing visuals, color camps, and working drawings. Study of related information such as consumer psychology and color, layout, and lettering is included in this studio oriented…

Track and Field: An Administrative Approach to the Science of Coaching.

ERIC Educational Resources Information Center

Steben, Ralph E.; Bell, Sam

This textbook on track and field organization and administration is directed toward the college physical education student and the track coach interested in technical, in-depth material. Each event is discussed under appropriate areas of physical categorization, with analysis of basic, biomechanical aspects of the activity. Line drawings and…

Educational Training and Careers of Ph.D. Holders: An Exploratory Empirical Study. Planning Paper 27.

ERIC Educational Resources Information Center

Morris, Jeffrey

This study analyzes the occupational mobility of individuals who hold the Ph.D. degree. Drawing upon data contained in the National Register of Scientific and Technical Personnel compiled by the National Science Foundation, this paper presents the quantitative relationships between educational background, occupational mobility, and salaries. Based…

Drawing and Landscape Simulation for Japanese Garden by Using Terrestrial Laser Scanner

NASA Astrophysics Data System (ADS)

Kumazaki, R.; Kunii, Y.

2015-05-01

Recently, many laser scanners are applied for various measurement fields. This paper investigates that it was useful to use the terrestrial laser scanner in the field of landscape architecture and examined a usage in Japanese garden. As for the use of 3D point cloud data in the Japanese garden, it is the visual use such as the animations. Therefore, some applications of the 3D point cloud data was investigated that are as follows. Firstly, ortho image of the Japanese garden could be outputted for the 3D point cloud data. Secondly, contour lines of the Japanese garden also could be extracted, and drawing was became possible. Consequently, drawing of Japanese garden was realized more efficiency due to achievement of laborsaving. Moreover, operation of the measurement and drawing could be performed without technical skills, and any observers can be operated. Furthermore, 3D point cloud data could be edited, and some landscape simulations that extraction and placement of tree or some objects were became possible. As a result, it can be said that the terrestrial laser scanner will be applied in landscape architecture field more widely.

Influence of Cognitive Styles on Technical Drawing Students' Achievements in Senior Secondary School in Federal Capital Territory, Abuja

ERIC Educational Resources Information Center

Owodunni, A. Samuel; Sanni, AbdulRahman; Nwokolo-Ojo, Joy; Igwe, C. Obeta

2017-01-01

There are different cognitive strategies for processing information which in turn influence students' academic achievement. This paper reports an investigation of cognitive styles and achievement scores of secondary school students. In the study, the standardised Group Embedded Figures Test was used to determine the influence of student's…

Gender Microaggressions and Learning Environments: The Role of Physical Space in Teaching Pedagogy and Communication

ERIC Educational Resources Information Center

Lester, Jaime; Yamanaka, Aoi; Struthers, Brice

2016-01-01

Career and technical education (CTE) programs account for a large proportion of student enrollments in community colleges each year. While women tend to dominate CTE enrollments overall, they remain concentrated in historically feminized fields contrary to nontraditional occupations in which less than 25% of workers are females. Drawing on the…

Learning Styles in Technical Drawing Courses as Perceived by Students in Egypt and Nigeria

ERIC Educational Resources Information Center

Elbitar, Hamdy M.; Umunadi, Kennedy E.

2011-01-01

Students have unique ways of learning, which may greatly affect the learning process and its outcome. In the process of education, instead of classifying students according to their insufficiency, teachers should try to get to know them and determine their cognitive, sensorial and kinetic characteristics. This study on improving learning style…

Hard Copy to Digital Transfer: 3D Models that Match 2D Maps

ERIC Educational Resources Information Center

Kellie, Andrew C.

2011-01-01

This research describes technical drawing techniques applied in a project involving digitizing of existing hard copy subsurface mapping for the preparation of three dimensional graphic and mathematical models. The intent of this research was to identify work flows that would support the project, ensure the accuracy of the digital data obtained,…

Learning Patterns in Music Practice: Links between Disposition, Practice Strategies and Outcomes

ERIC Educational Resources Information Center

StGeorge, Jennifer Mary; Holbrook, Allyson Patricia; Cantwell, Robert H.

2012-01-01

Research into musical practice has over recent decades focused on the technical and organisational strategies employed by novices and experts. What has been less studied are the background factors or influences on the quality of this music practice. Drawing on interview data collected from 66 children and adults from a mixed methods project, we…

Enlivening the Old with the New: 21st-Century Thinking Applied to 16th-Century Art Worlds

ERIC Educational Resources Information Center

Kent, Lori

2007-01-01

When displayed in museums and classrooms, Renaissance-era (1420-1600) painting, architecture, and drawing masterworks are often decontextualized from the social reality of the Academy system under which they were produced. For centuries, the artworks of the Italian Renaissance have seduced viewers with technical mastery, exquisite pigments, and…

Engineering Drawing Practices - Volume I of II: Aerospace and Ground Support Equipment

NASA Technical Reports Server (NTRS)

Schwindt, Paul A.

2015-01-01

This manual establishes the essential requirements and reference documents for the preparation and revision of digital product definition data sets prepared for or by NASA at KSC. This volume is only applicable to KSC in-house programs/projects. These requirements do not apply to the preparation of illustrations, artwork, or figures in technical publications.

CTE's Role in Energy and Environmental Sustainability

ERIC Educational Resources Information Center

Hyslop, Alisha

2009-01-01

ACTE Issue Briefs are designed to highlight the role of career and technical education (CTE) in a broader issue of national interest. Each Brief is designed to strengthen the voice of CTE related to the specific issue and to draw more attention to CTE activities and best practices around the country. The Briefs provide background information,…

Learning as Becoming in Vocational Education and Training: Class, Gender and the Role of Vocational Habitus

ERIC Educational Resources Information Center

Colley, Helen; James, David; Tedder, Michael; Diment, Kim

2003-01-01

Official accounts of learning in vocational education and training emphasise the acquisition of technical skills and knowledge to foster behavioural competence in the workplace. However, such accounts fail to acknowledge the relationship between learning and identity. Drawing on detailed case studies of three vocational courses--in childcare,…

The Pedagogy of Complex Work Support Systems: Infrastructuring Practices and the Production of Critical Awareness in Risk Auditing

ERIC Educational Resources Information Center

Mathisen, Arve; Nerland, Monika

2012-01-01

This paper employs a socio-technical perspective to explore the role of complex work support systems in organising knowledge and providing opportunities for learning in professional work. Drawing on concepts from infrastructure studies, such systems are seen as work infrastructures which connect information, knowledge, standards and work…

Development of Data Analysis Techniques to Provide Photometric Images for a Heliospheric Imager

DTIC Science & Technology

2008-10-31

drawings, specifications, or other data does not license the holder or any other person or corporation; or convey any rights or permission to...manufacture, use, or sell any patented invention that may relate to them. This report is published in the interest of scientific and technical... signed / / signed / JANET C. JOHNSTON

It's Not "Just the Facts, Ma'am": Writing for Success in Career Education

ERIC Educational Resources Information Center

Converse, Caren Wakerman

2012-01-01

Writing across the secondary curriculum has been viewed primarily through the lens of traditional academic courses taught in comprehensive high schools. In this paper the author draws on her past experience as a criminal justice teacher at a career and technical high school to describe writing that facilitates and demonstrates learning of subject…

Refugee Immigrants' Experiences of Racism and Racial Discrimination at Australian TAFE Institutes: A Transformative Psychosocial Approach

ERIC Educational Resources Information Center

Onsando, Gerald; Billett, Stephen

2017-01-01

This paper discusses experiences of racism and racial discrimination of seven refugee immigrants attending different courses at two Technical and Further Education (TAFE) institutes in South East Queensland, Australia. In doing so, the paper draws from two studies that focused on resettlement of refugee immigrants in Australia. A transformative…

Structural Equation Modeling Diagnostics Using R Package Semdiag and EQS

ERIC Educational Resources Information Center

Yuan, Ke-Hai; Zhang, Zhiyong

2012-01-01

Yuan and Hayashi (2010) introduced 2 scatter plots for model and data diagnostics in structural equation modeling (SEM). However, the generation of the plots requires in-depth understanding of their underlying technical details. This article develops and introduces an R package semdiag for easily drawing the 2 plots. With a model specified in EQS…

Building Capability in Vocational Education and Training Providers: The TAFE Cut. Occasional Paper

ERIC Educational Resources Information Center

Guthrie, Hugh; Clayton, Berwyn

2010-01-01

This paper focuses on issues which affect the capability of technical and further education (TAFE) providers to meet their clients' and stakeholders' needs and draws extensively on the reports of the consortium research program which examined ways to help build vocational education and training (VET) provider and workforce capability. The paper…

A Machine Learning Approach to Student Modeling. Technical Report No. 1. Annual Report, 11/82-11/83.

ERIC Educational Resources Information Center

Langley, Pat; And Others

The notion of buggy procedures has played an important role in recent cognitive models of mathematical skills. Some earlier work on student modeling used artificial intelligence methods to automatically construct buggy models of student behavior. An alternate approach, proposed here, draws on insights from the rapidly developing field of machine…

Building Community Capacity and Social Infrastructure through Landcare: A Case Study of Land Grant Engagement

ERIC Educational Resources Information Center

Kimmel, Courtney E.; Hull, R. Bruce; Stephenson, Max O.; Robertson, David P.; Cowgill, Kimberly H.

2012-01-01

In the struggle to remain true to their technical assistance and civic engagement missions in an era of shrinking budgets and increasingly complex accountability claims, land grant universities have developed different engagement strategies to contribute to the development of surrounding communities. Drawing on Flora and Flora's (in "Ann Am…

Summary of Forest health monitoring: 2006 national technical report

Treesearch

Mark J. Ambrose

2009-01-01

Forest Health Monitoring (FHM), together with cooperating researchers both in and outside of the Forest Service, continues to investigate a variety of issues relating to forest health. This report provides some of the latest analyses and results. The broad range of indicators presented demonstrates one reason it can be difficult to draw general conclusions about the...

Technically Speaking: Transforming Language Learning through Virtual Learning Environments (MOOs).

ERIC Educational Resources Information Center

von der Emde, Silke; Schneider, Jeffrey; Kotter, Markus

2001-01-01

Draws on experiences from a 7-week exchange between students learning German at an American college and advanced students of English at a German university. Maps out the benefits to using a MOO (multiple user domains object-oriented) for language learning: a student-centered learning environment structured by such objectives as peer teaching,…

Writing Material in Chemical Physics Research: The Laboratory Notebook as Locus of Technical and Textual Integration

ERIC Educational Resources Information Center

Wickman, Chad

2010-01-01

This article, drawing on ethnographic study in a chemical physics research facility, explores how notebooks are used and produced in the conduct of laboratory science. Data include written field notes of laboratory activity; visual documentation of "in situ" writing processes; analysis of inscriptions, texts, and material artifacts produced in the…

Hydrostatic collapse research in support of the Oman India gas pipeline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stark, P.R.; McKeehan, D.S.

1995-12-01

This paper provides a summary of the collapse test program conducted as part of the technical development for the Ultra Deep Oman to India Pipeline. The paper describes the motivation for conducting the collapse test program, outlines the test objectives and procedures, presents the results obtained, and draws conclusions on the factors affecting collapse resistance.

Evaluating Monitoring Systems in the European Social Fund Context: A Sociotechnical Approach

ERIC Educational Resources Information Center

Iannacci, Federico; Cornford, Tony; Cordella, Antonio; Grillo, Francesco

2009-01-01

In contrast to the prevailing image of monitoring systems as technical systems, it is proposed that they should rather be conceived of as social endeavors at exchanging information. Drawing on the monitoring and evaluation framework of Cornford, Doukidis, and Forster, the concept of information agreement is suggested as a way of assessing the…

A Conceptual-Pictorial Approach to the Understanding of Piaget's Theory of Mental Development.

ERIC Educational Resources Information Center

Mattimore-Knudson, Russell S.

Utilizing a minimum of technical terminology, this eight-chapter monograph introduces beginning psychology students to the basic concepts of Piaget's theory of mental development and to its application by parents and teachers. As an aid to learning, each of the concepts discussed is illustrated by black-and-white drawings which can be reproduced…

National Action Plan on Superconductivity Research and Development

NASA Astrophysics Data System (ADS)

1989-12-01

The Superconductivity Action Plan pursuant to the Superconductivity and Competitiveness Act of 1988 is presented. The plan draws upon contributions from leaders in the technical community of the Federal Government responsible for research and development in superconductivity programs, as well as from the report of the Committee to Advise the President on Superconductivity. Input from leaders in the private sector was obtained during the formulation and review of the plan. Some contents: Coordination of the plan; Technical areas (high temperature superconductivity materials in general, high temperature superconductivity films for sensors and electronics, magnets, large area high temperature superconductivity films, bulk conductors); and Policy areas.

Technical Support Document: Development of the Advanced Energy Design Guide for K-12 Schools--30% Energy Savings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pless, S.; Torcellini, P.; Long, N.

2007-09-01

This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for K-12 School Buildings (K-12 AEDG), a design guidance document intended to provide recommendations for achieving 30% energy savings in K-12 Schools over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The 30% energy savings target is the first step toward achieving net-zero energy schools; schools that, on an annual basis, draw from outside sources less or equal energy than they generate on site from renewable energy sources.

A socio-technical critique of tiered services: implications for interprofessional care.

PubMed

Hood, Rick

2015-01-01

In the health and social care sector, tiered services have become an increasingly influential way of organising professional expertise to address the needs of vulnerable people. Drawing on its application to UK child welfare services, this paper discusses the merits of the tiered model from a socio-technical perspective - an approach that has emerged from the fields of accident analysis and systems design. The main elements of a socio-technical critique are outlined and used to explore how tiered services provide support to families and prevent harm to children. Attention is drawn to the distribution of expertise and resources in a tiered system, and to the role of referral and gate-keeping procedures in dispersing accountability for outcomes. An argument is made for designing systems "against demand", and the paper concludes by discussing some alternative models of multi-agency provision.

Drawing in the blind and the sighted as a probe of cortical reorganization

NASA Astrophysics Data System (ADS)

Likova, Lora T.

2010-02-01

In contrast to other arts, such as music, there is a very little neuroimaging research on visual art and in particular - on drawing. Drawing - from artistic to technical - involves diverse aspects of spatial cognition, precise sensorimotor planning and control as well as a rich set of higher cognitive functions. A new method for learning the drawing skill in the blind that we have developed, and the technological advances of a multisensory MR-compatible drawing system, allowed us to run for the first time a comparative fMRI study on drawing in the blind and the sighted. In each population, we identified widely distributed cortical networks, extending from the occipital and temporal cortices, through the parietal to the frontal lobe. This is the first neuroimaging study of drawing in blind novices, as well as the first study on the learning to draw in either population. We sought to determine the cortical reorganization taking place as a result of learning to draw, despite the lack of visual input to the brains of the blind. Remarkably, we found massive recruitment of the visual cortex on learning to draw, although our subjects had no previous experience, but only a short training with our new drawing method. This finding implies a rapid, learning-based plasticity mechanism. We further proposed that the functional level of the brain reorganization in the blind may still differ from that in the sighted even in areas that overlap between the two populations, such as in the visual cortex. We tested this idea in the framework of saccadic suppression. A methodological innovation allowed us to estimate the retinotopic regions locations in the blind brain. Although the visual cortex of both groups was greatly recruited, only the sighted experienced dramatic suppression in hMT+ and V1, while there was no sign of an analogous process in the blind. This finding has important implications and suggests that the recruitment of the visual cortex in the blind does not assure a full functional parallel.

"Once-Upon-A-Time" Reconsidered: The Developmental Dialectic between Function and Form. Technical Report No. 36.

ERIC Educational Resources Information Center

Dyson, Anne Haas

A case study traces the evolution of "once-upon-a-time" in a child's classroom story writing, drawing upon data collected in a three-year study of writing development in an urban magnet school. The subject, Mitzi, is observed from kindergarten through second grade. The study assumes that stories are cultural discourse forms that serve…

Practical Nursing Curriculum Guide. Including the Expanded Functions of I.V. Therapy and LPN Management. Invest in Success.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

Under the Idaho state system for curriculum development in vocational education, Technical Committees made up solely of industry personnel are responsible for drawing up task lists for each program. The first part of this guide contains a curriculum for instruction of practical nurses who are eligible to sit for the license examination upon…

Fundamentals of Dental Assisting and Expanded Functions. Curriculum Guide. Volumes 1-2. [Revised.] Invest in Success.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

Under the Idaho state system for curriculum development in vocational education, Technical Committees made up solely of industry personnel are responsible for drawing up task lists for each program. Accordingly, a task list for dental assistants was drawn up and used as a basis for revising the curriculum guide for fundamentals of dental assisting…

Lost on a Pragmatist Highway: Searching for a Theory to Inform Teaching Practice in TAFE

ERIC Educational Resources Information Center

Haycock, John

2009-01-01

This paper seeks to understand how practitioners learn about, develop and work with educational theory, and how this informs and influences their practice. It is based primarily on an in-depth interview with one pre-vocational program teacher working in a large, metropolitan TAFE (Technical and Further Education) institute. It also draws on the…

The Apollo spacecraft: A chronology. Volume 2: 8 November 1962 - 30 September 1964

NASA Technical Reports Server (NTRS)

Morse, M. L.; Bays, J. K.

1973-01-01

A chronology of the Apollo spacecraft development and production program is presented. The subjects discussed are: (1) defining contractural relations, (2) developing hardware distinctions, and (3) developing software ground rules. Illustrations, drawings, and photographs are used extensively to supplement the technical writing. Descriptions of life support systems, communication equipment, propulsion systems, control devices, and spacecraft components are provided.

Extending the psycho-historical framework to understand artistic production.

PubMed

Kozbelt, Aaron; Ostrofsky, Justin

2013-04-01

We discuss how the psycho-historical framework can be profitably applied to artistic production, facilitating a synthesis of perception-based and knowledge-based perspectives on realistic observational drawing. We note that artists' technical knowledge itself constitutes a major component of an artwork's historical context, and that links between artistic practice and psychological theory may yet yield conclusions in line with universalist perspectives.

Two Dimensional (2D) P-Aramid Dry Multi-Layered Woven Fabrics Deformational Behaviour for Technical Applications

NASA Astrophysics Data System (ADS)

Abtew, M. A.; Loghin, C.; Cristian, I.; Boussu, F.; Bruniaux, P.; Chen, Y.; Wang, L.

2018-06-01

In today’s scenario for the various technical applications, from composites to body armour, the material mouldability along with its mechanical property become very important. In the present study, two dimensional (2D) woven fabrics made of para-aramid high performance fibres in multi-layer dry structure were used for investigating different forming characteristics. The different layers were arranged with 0°/90° orientation for deep drawing formability test to analyse the effect of number of layers and blank-holder pressure (BHP) during the test. Specific preforming device with low speed forming process and predefined hemispherical shape of punch has been applied. Using fine photographic analysis, some important 2D multi-layer fabrics forming characteristics i.e., material drawing-in, surface shear angle etc. from the imposed deformation have been observed, measured and analysed for better understanding and co MPa rison. The result revealed that the mouldability behaviour of the multi-layered dry textile fabric preforms is directional, and closely dependent on blank-holding pressure and number of layers. This indicates both parameters should be carefully considered while material deformation to avoid the formation of wrinkling and maintain other mechanical properties on final application.

Specification and tolerancing of bulk glass material imperfections with ISO standards

NASA Astrophysics Data System (ADS)

Krisiloff, Allen J.

2017-08-01

Standards for the specification of tolerances for glass material imperfections have been evolving over the past 40 years. Today, several individual ISO Standards for drawings and drawing notation - ISO 10110-2, ISO-10110-3, and ISO- 10110-4, which were last revised in 1996 and 1997 - are being merged and re-written to incorporate technical improvements and enhance the clarity of presentation. The new standard, tentatively numbered ISO 10110-18, is on schedule for release in 2018. It will also provide notation to directly utilize concepts and quality classes defined in ISO 12123, the newly revised standard for raw glass material. New ways to specify striae and a way to specify raw material specifications on a finished part drawing are two additional highlights of the revised versions of this set of ISO standards. This paper will discuss the old shortcomings, their corrections, and the new features incorporated into the set of standards currently under final development and whose publication is expected next year.

[Introduction of active learning and student readership in teaching by the pharmaceutical faculty].

PubMed

Sekiguchi, Masaki; Yamato, Ippei; Kato, Tetsuta; Torigoe, Kojyun

2005-07-01

We have introduced improvements and new approaches into our teaching methods by exploiting 4 active learning methods for pharmacy students of first year. The 4 teaching methods for each lesson or take home assignment are follows: 1) problem-based learning (clinical case) including a student presentation of the clinical case, 2) schematic drawings of the human organs, one drawing done in 15-20 min during the week following a lecture and a second drawing done with reference to a professional textbook, 3) learning of professional themes in take home assignments, and 4) short test in order to confirm the understanding of technical terms by using paper or computer. These improvements and new methods provide active approaches for pharmacy students (as opposed to passive memorization of words and image study). In combination, they have proven to be useful as a learning method to acquire expert knowledge and to convert from passive learning approach to active learning approach of pharmacy students in the classroom.

Social inequalities in the face of scientific and technological development: an antinomy or an historic problem?

PubMed

Delgado, Guilherme Costa

2017-07-01

This paper aims to conduct a conceptual analysis of the relationship between scientific and technical progress and social equality, or the reduction of inequalities. We examine this relationship by drawing on three theoretical perspectives: 1) ethical economics, championed by classical economic thinkers and centered on utilitarian self-interest, 2) Mainstream theories of economic development espousing the endogenous link between labor productivity growth and technical progress, 3) the critique of theories of economic development that emerged in the second half of the twentieth century, including Celso Furtado's critique of the theory of underdevelopment, emphasizing the prevalence of egalitarian tendencies, and ecological economics, which suggest alternative paths to those set by "classical" theories of development. The fundamental antinomy posed by the title of this article, characterized by an intrinsic contradiction between technical progress and social equality, strictly presupposes the ethical economics perspective, dominated by the social relations that constitute the "social order".

Using Computer-Aided Design Software and 3D Printers to Improve Spatial Visualization

ERIC Educational Resources Information Center

Katsio-Loudis, Petros; Jones, Millie

2015-01-01

Many articles have been published on the use of 3D printing technology. From prefabricated homes and outdoor structures to human organs, 3D printing technology has found a niche in many fields, but especially education. With the introduction of AutoCAD technical drawing programs and now 3D printing, learners can use 3D printed models to develop…

Educational Consultancy in Small States: A Source Book. Educational Development in the Small States of the Commonwealth Series.

ERIC Educational Resources Information Center

Lloyd, Marie-Pierre; Packer, Steve

A problem for small states is how to access specialist knowledge when the national pool of human resources is small. This is a difficulty for ministries of education and educational institutions. The usual response is to draw on technical assistance, often as part of a wider aid package, from industrialized countries or international agencies. But…

Blast and Fragment Protective Sandwich Panel Concepts for Stainless Steel Monohull Designs

DTIC Science & Technology

2008-10-21

to draw broader conclusions. 8. Concluding remarks The resistance of metallic sandwich panels to localized spherical impulsive sources has been...hour per response, including the time for reviewing instructions, searching existing data sources , gathering and maintaining the data needed, and...applications and ship hull blister attachments. Technical Approach The approach used in this research program exploited progress made in metallic

Low Cost Equipment for Science and Technology Education. A Resource Document on Low Cost Equipment That You Can Make and Use.

ERIC Educational Resources Information Center

Lowe, N. K., Ed.

This document provides technical information and simple instructions for constructing 84 different pieces of science equipment. Each entry includes: (1) name of item; (2) purpose of the equipment; (3) person who submitted the information; (4) line drawing of prototype; (5) list of low-cost materials needed; (6) construction procedures; (7)…

The Phoenix: Vocational Education and Training in Singapore. International Comparative Study of Leading Vocational Education Systems

ERIC Educational Resources Information Center

Tucker, Marc S.

2012-01-01

This is the first in a series of reports from the Center on International Education Benchmarking (CIEB) exploring the leading vocational and technical education systems from around the world to draw out what makes these systems great and what other countries can learn from them. This first report was based on a visit of several days to Singapore…

Insider Threat Study: Illicit Cyber Activity in the Banking and Finance Sector

DTIC Science & Technology

2005-06-01

as a computer fraud case investigated by the Secret Service. Each case was analyzed from a behavioral and a technical perspective to identify...insider threat and address the issue from an approach that draws on human resources, corporate security, and information security perspectives. The ... Secret Service National Threat Assessment Center and the CERT Coordination Center of Carnegie Mellon University’s Software Engineering Institute joined

Solar hot water space heating system. Technical progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Dam, T

1979-08-13

A retrofit solar heating system was installed on Madison Hall at Jordan College, Cedar Springs, Michigan. The system provides heating and domestic water preheating for a campus dormitory. Freeze protection is provided by a draindown system. The building and solar system, construction progress, and design changes are described. Included in appendices are: condensate trap design, structural analysis, pictures of installation, operating instructions, maintenance instructions, and as-built drawings. (MHR)

Making Work Pay: How To Design and Implement Financial Work Supports To Improve Family and Child Well-Being and Reduce Poverty. How-To Guide: Technical Assistance for States and Localities.

ERIC Educational Resources Information Center

Greenberger, Debbie; Anselmi, Robert

This guide explains how to design and implement financial work supports in order to improve family and child well-being. The information provided draws heavily from the study of these three programs that increased employment and earnings while improving employment stability, boosting income, and reducing poverty: Minnesota Family Investment…

Quality Inspection Test, Demonstration and Evaluation Report for High Reliability Laser Polarizers. Revision

DTIC Science & Technology

1988-02-24

switch timing, the length of the optical resonator , or both. The output of the test source (Nd:YAG) is set to the desired intensity with a variable...1 2.0 POLARIZER TECHNICAL SPECIFICATION .......................... 3 3.0 PRISM FABRICATION AND INSPECTION ........................... 4...was updated before the beginning of the Phase III work. The primary changes were consolidating the prism half and assembly drawings so surfaces are

APPROACH TO INDUSTRIAL TRAINING, AN ASSESSMENT OF THE MAIN TASKS FACING INDUSTRIAL TRAINING BOARDS--A STATEMENT BY THE CENTRAL TRAINING COUNCIL. MEMORANDUM NUMBER 5.

ERIC Educational Resources Information Center

Ministry of Labour, London (England).

THE INDUSTRIAL TRAINING BOARDS' MAIN TASKS UNDER THE INDUSTRIAL TRAINING ACT ARE TO (1) ASSESS THE MANPOWER AND TRAINING REQUIREMENTS OF EACH INDUSTRY (BASED ON FORECASTS OF GROWTH OR CONTRACTION OF INDUSTRY, TECHNICAL, DEMOGRAPHIC, AND EDUCATIONAL CHANGE, AND CHANGES IN THE LEVEL AND DIRECTION OF DEMAND FOR GOODS AND SERVICES), (2) DRAW UP…

The photomultiplier tube calibration system of the MicroBooNE experiment

DOE PAGES

Conrad, J.; Jones, B. J. P.; Moss, Z.; ...

2015-06-03

Here, we report on the design and construction of a LED-based fiber calibration system for large liquid argon time projection detectors. This system was developed to calibrate the optical systems of the MicroBooNE experiment. As well as detailing the materials and installation procedure, we provide technical drawings and specifications so that the system may be easily replicated in future LArTPC detectors.

Boric acid permeation in forward osmosis membrane processes: modeling, experiments, and implications.

PubMed

Jin, Xue; Tang, Chuyang Y; Gu, Yangshuo; She, Qianhong; Qi, Saren

2011-03-15

Forward osmosis (FO) is attracting increasing interest for its potential applications in desalination. In FO, permeation of contaminants from feed solution into draw solution through the semipermeable membrane can take place simultaneously with water diffusion. Understanding the contaminants transport through and rejection by FO membrane has significant technical implications in the way to separate clean water from the diluted draw solution. In this study, a model was developed to predict boron flux in FO operation. A strong agreement between modeling results and experimental data indicates that the model developed in this study can accurately predict the boron transport through FO membranes. Furthermore, the model can guide the fabrication of improved FO membranes with decreased boron permeability and structural parameter to minimize boron flux. Both theoretical model and experimental results demonstrated that when membrane active layer was facing draw solution, boron flux was substantially greater compared to the other membrane orientation due to more severe internal concentration polarization. In this investigation, for the first time, rejection of contaminants was defined in FO processes. This is critical to compare the membrane performance between different membranes and experimental conditions.

Environmental Planning Technical Report. Biological Resources

DTIC Science & Technology

1984-01-01

8217 v rini ana va r. Chokecherry melanoca rpa Shrubs Artemisia cana Silver sagebrush Ceratoides l-anata Wi nterf at Cerocarpus mortanus Mountain nahogany...nocarpa Chokecherry ialTix Spp. Wifllo 2-10 Table 2.6.1-i Continued, page 5 of 6 DOMINANT AND CHARACTERISTIC PLANT SPECIES Shrubs Salix spp. Willow...population on the Goshen Hole Rim near Flight S. Some of the more mesic draws support golden currant (Ribes aureum) and chokecherry (Prunus

A State Articulated Instructional Objectives Guide for Occupational Education Programs. State Pilot Model for Drafting (Graphic Communications). Part I--Basic. Part II--Specialty Programs. Section A (Mechanical Drafting and Design). Section B (Architectural Drafting and Design).

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

A two-part articulation instructional objective guide for drafting (graphic communications) is provided. Part I contains summary information on seven blocks (courses) of instruction. They are as follow: introduction; basic technical drafting; problem solving in graphics; reproduction processes; freehand drawing and sketching; graphics composition;…

Shuttle cryogenic supply system optimization study. Volume 2: Technical report, sections 4 through 9

NASA Technical Reports Server (NTRS)

1973-01-01

The design and development of cryogenic supply systems for space shuttle vehicles are discussed. The weights, component counts, and statements of advantages and disadvantages of the systems considered are presented. Performance characteristics of the systems are analyzed in the form of graphs. Block diagrams and engineering drawings of the candidate systems are provided. Special consideration is given to flow rates and thermodynamic properties of the cryogenic systems.

Which Early Care and Education Centers Participate in Head Start or Public Pre-Kindergarten? National Survey of Early Care & Education. Technical Report. OPRE Report 2015-92a

ERIC Educational Resources Information Center

Administration for Children & Families, 2015

2015-01-01

This report draws on newly available data from the National Survey of Early Care and Education (NSECE) to describe early care and education (ECE) centers that participate in two prominent publicly-funded ECE initiatives: Head Start and publicly-funded pre-kindergarten. Although a great deal is known about Head Start programs, and there are sources…

The UNIX Operating System: A Model for Software Design.

PubMed

Kernighan, B W; Morgan, S P

1982-02-12

The UNIX operating system, a general-purpose time-sharng system, has, without marketing, advertising, or technical support, become widely used by universities and scientific research establishments. It is the de facto standard of comparison for such systems and has spawned a small industry of suppliers of UNIX variants and look-alikes. This article attempts to uncover the reasons for its success and to draw some lessons for the future of operating systems.

Design of a Catadioptric VCASS Helmet-Mounted Display

DTIC Science & Technology

1981-11-01

technical impact he evalutes jointly with the optical, mechanical, and electrical designer. The human factors engineer gives to the other workers a sense...Governn:ent drawings, specificatlons, or other data are used for any pi-pose other than a definitely relatei Government procurement operation, the ...Government thereby Incurs no responsibilitY *Or MnY objWpk wbubatsowr. and the fact tht the Government may lave formulated, furnished, or in any way supplied

Operating in the Gray Zone: An Alternative Paradigm for U.S. Military Strategy

DTIC Science & Technology

2016-04-01

labeling, or re-labeling, may have been to draw the attention of busy policymakers to rapidly emerging security issues , it has evolved into something... issues affecting the national security community. The Peacekeeping and Stability Operations Institute provides subject matter expertise, technical...SSI) is part of the U.S. Army War College and is the strategic-level study agent for issues related to national security and military strategy with

Ocean Thermal Energy Conversion power system development. Phase I: preliminary design. Final report. [ODSP-3 code; OTEC Steady-State Analysis Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-12-04

The following appendices are included; Dynamic Simulation Program (ODSP-3); sample results of dynamic simulation; trip report - NH/sub 3/ safety precautions/accident records; trip report - US Coast Guard Headquarters; OTEC power system development, preliminary design test program report; medium turbine generator inspection point program; net energy analysis; bus bar cost of electricity; OTEC technical specifications; and engineer drawings. (WHK)

Physics Doctorates: Skills Used & Satisfaction with Employment. Data from the Degree Recipient Follow-Up Survey for the Classes of 2013 and 2014. Focus On

ERIC Educational Resources Information Center

Pold, Jack; Mulvey, Patrick

2016-01-01

By the time people earn physics PhDs, they have learned a great deal about physics and how research is conducted. However, physics PhDs also develop skills and knowledge in a number of related areas, such as advanced mathematics, programming, modeling, and technical writing. Physics PhDs draw upon an arsenal of skills and knowledge in their…

Thinking about Air and Space Power in 2025: Five Guiding Principles

DTIC Science & Technology

2012-06-01

conflicts show the need for thinking about this principle in the design as well as the use of platforms. Any such analysis neces- sitates drawing on all...space and the commonplace employment of medium- and high - altitude drones. The self-deployment of drones and their integra- tion into air traffic will...technical advances will lead to the de- velopment of stratospheric drones ( high - altitude platforms), adding the benefits of increased persistence

Military Technical Revolution: A Structural Framework

DTIC Science & Technology

1993-03-01

new world situation and draw conclusions about the military forces the United States will need in the years ahead to meet its demands and challenges...collectivization of peacetime military operations. In this new world , the United States will need to rethink the nature and scope of its national interests. Those...mission will also require defense of international sea- lanes and Middle East oil, both of which remain vital to the world and U ’. S . economies. Third

Information Interface Related Standards, Guidelines, and Recommended Practices.

DTIC Science & Technology

1985-07-01

Application Workshop, IEEE, October 1984 (11) Software Portability and Standards, by Ingemar Dahlstrand, Ellis Horwood Ltd., 1984 (12) World of EDP...March 29, 1985, p. 42-48 * 9. "IBM’s Topview Plays to Poor Reviews of Early Users," Computer World , March 4, 1985, p. 5 10. "Lack of Software Standards...Information Symbols ISOiTR 7239-1984 - Development and Principles for Application of Public Information Symbols ISO/TR 8545 -1984 - Technical Drawings

Identifying and training non-technical skills for teams in acute medicine

PubMed Central

Flin, R; Maran, N

2004-01-01

The aviation domain provides a better analogy for the "temporary" teams that are found in acute medical specialities than industrial or military teamwork research based on established teams. Crew resource management (CRM) training, which emphasises portable skills (for whatever crew a pilot is rostered to on a given flight), has been recognised to have potential application in medicine, especially for teams in the operating theatre, intensive care unit, and emergency room. Drawing on research from aviation psychology that produced the behavioural marker system NOTECHS for rating European pilots' non-technical skills for teamwork on the flightdeck, this paper outlines the Anaesthetists Non-Technical Skills behavioural rating system for anaesthetists working in operating theatre teams. This taxonomy was used as the design basis for a training course, Crisis Avoidance Resource Management for Anaesthetists used to develop these skills, based in an operating theatre simulator. Further developments of this training programme for teams in emergency medicine are outlined. PMID:15465960

Mechanistic approach to generalized technical analysis of share prices and stock market indices

NASA Astrophysics Data System (ADS)

Ausloos, M.; Ivanova, K.

2002-05-01

Classical technical analysis methods of stock evolution are recalled, i.e. the notion of moving averages and momentum indicators. The moving averages lead to define death and gold crosses, resistance and support lines. Momentum indicators lead the price trend, thus give signals before the price trend turns over. The classical technical analysis investment strategy is thereby sketched. Next, we present a generalization of these tricks drawing on physical principles, i.e. taking into account not only the price of a stock but also the volume of transactions. The latter becomes a time dependent generalized mass. The notion of pressure, acceleration and force are deduced. A generalized (kinetic) energy is easily defined. It is understood that the momentum indicators take into account the sign of the fluctuations, while the energy is geared toward the absolute value of the fluctuations. They have different patterns which are checked by searching for the crossing points of their respective moving averages. The case of IBM evolution over 1990-2000 is used for illustrations.

2014 SRNL LDRD Annual Report, Rev. 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mcwhorter, S.

2015-03-15

Laboratory Directed Research and Development is a congressionally authorized program that provides the ‘innovation inspiration’ from which many of the Laboratory’s multi-discipline advancements are made in both science and engineering technology. The program is the backbone for insuring that scientific, technical and engineering capabilities can meet current and future needs. It is an important tool in reducing the probability of technological surprise by allowing laboratory technical staff room to innovate and keep abreast of scientific breakthroughs. Drawing from the synergism among the EM and NNSA missions, and work from other federal agencies ensures that LDRD is the key element inmore » maintaining the vitality of SRNL’s technical programs. The LDRD program aims to position the Laboratory for new business in clean energy, national security, nuclear materials management and environmental stewardship by leveraging the unique capabilities of the Laboratory to yield foundational scientific research in core business areas, while aligning with SRS strategic initiatives and maintaining a vision for ultimate DOE applications.« less

Social media and nursing practice: changing the balance between the social and technical aspects of work.

PubMed

Casella, Evan; Mills, Jane; Usher, Kim

2014-01-01

Modern communication methods are drastically changing the way people interact with each other. Professions such as nursing need to evolve to remain relevant as social infrastructure changes. In the 1960s, researchers developed a sociotechnical theory that stated workers were more motivated and productive if there was a good balance between the social and technical aspects of their work. Today's technology is blurring the boundaries between the social and the technical thereby transforming human contact and communication into a multi-method process. In Australia, people are adept at utilising social media technology to become more efficient, creative and connected; Australian nurses also need to embrace changing technology to capitalise on the professional opportunities offered by social media. This paper imagines a world where nurses integrate social media into assessing, diagnosing, planning, implementing and evaluating care. Discussion draws on a combination of real-world examples of best-practice and blue-sky thinking to demonstrate that evidence-based care must be combined with the adoption of future-forward technology.

Key team physical and technical performance indicators indicative of team quality in the soccer Chinese super league.

PubMed

Yang, Gai; Leicht, Anthony S; Lago, Carlos; Gómez, Miguel-Ángel

2018-01-01

The aim of this study was to identify the key physical and technical performance variables related to team quality in the Chinese Super League (CSL). Teams' performance variables were collected from 240 matches and analysed via analysis of variance between end-of-season-ranked groups and multinomial logistic regression. Significant physical performance differences between groups were identified for sprinting (top-ranked group vs. upper-middle-ranked group) and total distance covered without possession (upper and upper-middle-ranked groups and lower-ranked group). For technical performance, teams in the top-ranked group exhibited a significantly greater amount of possession in opponent's half, number of entry passes in the final 1/3 of the field and the Penalty Area, and 50-50 challenges than lower-ranked teams. Finally, time of possession increased the probability of a win compared with a draw. The current study identified key performance indicators that differentiated end-season team quality within the CSL.

Live texturing of augmented reality characters from colored drawings.

PubMed

Magnenat, Stéphane; Ngo, Dat Tien; Zünd, Fabio; Ryffel, Mattia; Noris, Gioacchino; Rothlin, Gerhard; Marra, Alessia; Nitti, Maurizio; Fua, Pascal; Gross, Markus; Sumner, Robert W

2015-11-01

Coloring books capture the imagination of children and provide them with one of their earliest opportunities for creative expression. However, given the proliferation and popularity of digital devices, real-world activities like coloring can seem unexciting, and children become less engaged in them. Augmented reality holds unique potential to impact this situation by providing a bridge between real-world activities and digital enhancements. In this paper, we present an augmented reality coloring book App in which children color characters in a printed coloring book and inspect their work using a mobile device. The drawing is detected and tracked, and the video stream is augmented with an animated 3-D version of the character that is textured according to the child's coloring. This is possible thanks to several novel technical contributions. We present a texturing process that applies the captured texture from a 2-D colored drawing to both the visible and occluded regions of a 3-D character in real time. We develop a deformable surface tracking method designed for colored drawings that uses a new outlier rejection algorithm for real-time tracking and surface deformation recovery. We present a content creation pipeline to efficiently create the 2-D and 3-D content. And, finally, we validate our work with two user studies that examine the quality of our texturing algorithm and the overall App experience.

[Book review] Waterfowl ecology and management: Selected readings

USGS Publications Warehouse

Krapu, Gary L.

1983-01-01

This book is a compilation of papers from the extensive and varied published literature on the ecology and management of waterfowl. The 125 technical papers reprinted in this book are arranged in eight major sections and are from 21 journals, government reports, several books, and proceedings of symposia and annual conferences. The most frequent sources of papers are The Journal of Wildlife Management, The Auk, Transactions North American Wildlife and Natural Resources Conference, and Wildfowl. These readings span the period from 1937 through 1981. A majority of the technical papers was published during the sixties and seventies, reflecting the expansion of waterfowl research during that period. The front cover and the introductory page of each section are illustrated with black-and-white drawings of North American waterfowl by D. R. Barrick.

Overview of Variable Renewable Energy Regulatory Issues: A Clean Energy Regulators Initiative Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, M.; Cox, S.

This CERI report aims to provide an introductory overview of key regulatory issues associated with the deployment of renewable energy -- particularly variable renewable energy (VRE) sources such wind and solar power. The report draws upon the research and experiences from various international contexts, and identifies key ideas that have emerged from the growing body of VRE deployment experience and regulatory knowledge. The report assumes basic familiarity with regulatory concepts, and although it is not written for a technical audience, directs the reader to further reading when available. VRE deployment generates various regulatory issues: substantive, procedural, and public interest issues,more » and the report aims to provide an empirical and technical grounding for all three types of questions as appropriate.« less

An Adaptive Grid Algorithm for Nonequilibrium Hypersonic Flows

DTIC Science & Technology

1990-04-01

FORCE SYSTEMS COMMAND WRIGHT-PATTERSON AIR FORCE BASE, OHIO 45433-6553 NOTICE When Government drawings, specifications, or other data are used for any...any rights or permission to manufacture, use , or sell any patented invention that may in any way be related thereto. This technical report has been...WRDC/FIMN, WPAFB OH 45433-6553 to help us maintain a current mailing list. Copies of this report should not be returned unless it is required by security

Recent Physics Doctorates: Skills Used & Satisfaction with Employment. Data from the Degree Recipient Follow-Up Survey for the Classes of 2009 and 2010. Focus On

ERIC Educational Resources Information Center

Anderson, Garrett; Mulvey, Patrick

2013-01-01

By the time people earn physics PhDs, they have learned a great deal about physics and how research is conducted. However, physics PhDs also develop skills and knowledge in a number of related areas, such as advanced mathematics, programming, modeling, and technical writing. New physics PhDs draw upon an arsenal of skills and knowledge in their…

Developing Verification Systems for Building Information Models of Heritage Buildings with Heterogeneous Datasets

NASA Astrophysics Data System (ADS)

Chow, L.; Fai, S.

2017-08-01

The digitization and abstraction of existing buildings into building information models requires the translation of heterogeneous datasets that may include CAD, technical reports, historic texts, archival drawings, terrestrial laser scanning, and photogrammetry into model elements. In this paper, we discuss a project undertaken by the Carleton Immersive Media Studio (CIMS) that explored the synthesis of heterogeneous datasets for the development of a building information model (BIM) for one of Canada's most significant heritage assets - the Centre Block of the Parliament Hill National Historic Site. The scope of the project included the development of an as-found model of the century-old, six-story building in anticipation of specific model uses for an extensive rehabilitation program. The as-found Centre Block model was developed in Revit using primarily point cloud data from terrestrial laser scanning. The data was captured by CIMS in partnership with Heritage Conservation Services (HCS), Public Services and Procurement Canada (PSPC), using a Leica C10 and P40 (exterior and large interior spaces) and a Faro Focus (small to mid-sized interior spaces). Secondary sources such as archival drawings, photographs, and technical reports were referenced in cases where point cloud data was not available. As a result of working with heterogeneous data sets, a verification system was introduced in order to communicate to model users/viewers the source of information for each building element within the model.

Human-computer interaction: psychological aspects of the human use of computing.

PubMed

Olson, Gary M; Olson, Judith S

2003-01-01

Human-computer interaction (HCI) is a multidisciplinary field in which psychology and other social sciences unite with computer science and related technical fields with the goal of making computing systems that are both useful and usable. It is a blend of applied and basic research, both drawing from psychological research and contributing new ideas to it. New technologies continuously challenge HCI researchers with new options, as do the demands of new audiences and uses. A variety of usability methods have been developed that draw upon psychological principles. HCI research has expanded beyond its roots in the cognitive processes of individual users to include social and organizational processes involved in computer usage in real environments as well as the use of computers in collaboration. HCI researchers need to be mindful of the longer-term changes brought about by the use of computing in a variety of venues.

The influence of the structure of the metal load removal from liquid steel in electric arc furnaces

NASA Astrophysics Data System (ADS)

Pǎcurar, Cristina; Hepuť, Teodor; Crisan, Eugen

2016-06-01

One of the main technical and economic indicators in the steel industry and steel respectively the development it is the removal of liquid steel. This indicator depends on several factors, namely technology: the structure and the quality metal load, the degree of preparedness of it, and the content of non-metallic material accompanying the unit of drawing up, the technology for the elaboration, etc. research has been taken into account in drawing up steel electric arc furnace type spring EBT (Electric Bottom taping), seeking to load and removing components of liquid steel. Metal load has been composed of eight metal grades, in some cases with great differences in terms of quality. Data obtained were processed in the EXCEL spreadsheet programs and MATLAB, the results obtained being presented both graphically and analytically. On the basis of the results obtained may opt for a load optimal structure metal.

Building America Case Study: Cold Climate Foundation Wall Hygrothermal Research Facility, Cloquet, Minnesota (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

NorthernSTAR

2014-09-01

This report focuses on the progress made to date and the technical details of the experiment. An overview of the experimental data being collected with some interesting highlights noted thus far is also provided. A full analysis of the experimental data and the drawing of conclusions with regard to the thermal and hygrothermal performance of the retrofit foundation insulation systems tested will only be possible after a full year of data has been collected in 2014.

Happiness: origins, forms, and technical relevance.

PubMed

Akhtar, Salman

2010-09-01

By critically reviewing Freud's views on happiness, and also those of Helene Deutsch, Bertram Lewin, Melanie Klein, and Heinz Kohut, the author evolves a complex and multilayered perspective on the phenomenon. He categorizes happiness into four related and occasionally overlapping varieties: pleasure-based happiness (elation), assertion-based happiness (joy), merger-based happiness (ecstasy), and fulfillment-based happiness (contentment). After entering some caveats and drawing from his clinical experience, the author then demonstrates the relevance of these ideas to the conduct of psychotherapy and psychoanalysis.

Total energy food plant 21 million gallon ethanol facility

NASA Astrophysics Data System (ADS)

1981-10-01

The Phase I Engineering study includes the following: process description, waste water treatment plant, material summary, energy chart, capital cost estimate, equipment list, personnel requirements, drawings list, specifications list, and project schedule. The economic and financial feasibility of the technical process, and environmental, health, safety, and socio-economic assessments for the project are reported. The costs for extending the following utilities to the property line of the selected site are presented: potable water, sewer system, electricity, roads for truck traffic, and rail service.

Thermoelectric materials evaluation program. Technical summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hinderman, J.D.

1979-04-01

Research progress on the thermoelectric materials evaluation program is reported covering the period January 1, 1976 to September 30, 1978. Topical reports are presented on (1) hot and cold end ..delta..T's, (2) hardware mobility, (3) p-leg sublimation suppression, (4) thermodynamic stability of p-legs, (5) n-leg material process improvements to reduce extraneous resistance, (6) n-leg cracking, (7) dynamic evaluation of converter, and (8) data base and degradation modes. Twenty attachments are included which present supporting drawings, specifications, procedures, and data. (WHK)

Line focus concentrating collector for Copper Mountain Ski Resort, Colorado (Engineering Materials)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1983-06-02

The present invention is a device which develops an accurate line focus concentrating collector by flexural bending of thin reflective materials. This method avoids the need for expensive tooling and support frame fabrication. The technical work conducted during this quarter included completion of designs for the prototype system for the Copper Mountain Ski Resort in Colorado. Evaluation of alternate tracking and drive systems and final design of the support system. These drawings accompany DOE/CS/15072--T4.

Life sciences payload definition and integration study, task C and D. Volume 4: Preliminary equipment item specification catalog

NASA Technical Reports Server (NTRS)

1973-01-01

A specification catalog to define the equipment to be used for conducting life sciences experiments in a space laboratory is presented. The specification sheets list the purpose of the equipment item, and any specific technical requirements which can be identified. The status of similar hardware for ground use is stated with comments regarding modifications required to achieve spaceflight qualified hardware. Pertinent sketches, commercial catalog sheets, or drawings of the applicable equipment are included.

Physical and performance characteristics of instruments selected for global change monitoring

NASA Technical Reports Server (NTRS)

Allen, Cheryl L.

1991-01-01

The following appendix (appendix B) lists the instruments chosen for the Global Change Monitoring program. The instruments are described according to the following categories: (1) Title; (2) Measurement; (3) Contact; (4) Instrument Type; (5) Dimensions; (6) Mass; (7) Average Operational Power; (8) Data Rate; (9) Spectral/Frequency Range; (10) Number of Channels/Frequencies; (11) Viewing Field; (12) Scanning Characteristics; (13) Resolution (Horizontal/Vertical); (14) Swath Width; (15) Satellite Application; and (16) Technology Status. A technical drawing of each instrument is also provided.

Saying it with feeling: photonovels and comic books in development.

PubMed

Cain, B

1986-01-01

Advantages of photonovels and comic books to communicate developmental issues are described. These print media are stories told by means of drawings or photographs, with few words. The advantages of these media are their popularity, their ability to communicate cause and effect, symbols or analogies, emotional subjects. Readers like stories, identify with culturally appropriate and attractive characters, and retain messages well. Examples of popular themes that are effective are: comparisons of 2 families, sexual intrigues, and encounters with the supernatural. These materials may be expensive to produce, contain many more pages than a technical pamphlet, require skilled personnel for the design, and definitely must be pre-tested before the target audience. Although producing comics and photonovels is not easy, they are good media for presenting dramatic, emotional, and controversial issues along with the technical information contained.

Getting the aorta pants in place: a 'community of guidance' in the evolving practice of vascular implant surgery.

PubMed

Brattheim, Berit; Faxvaag, Arild; Tjora, Aksel

2011-09-01

The evolving nature of surgical treatments creates gaps between evidence-based guidelines and actual clinical practice.This article addresses the emerging clinical practice of the EndoVascular Aneurysm Repair (EVAR), a surgical treatment of patients with Abdominal Aortic Aneurysm (AAA). Drawing on a qualitative study across three hospitals, we identified three interplaying expertise traits: the collective, the interpersonal and the technical, each being present to promote surgical work. The evolvement of EVAR is contextualized within technical artefacts and patient characteristics, along with a joint decision approach. The intertwinement between various expertise traits and contextual factors forms a 'community of guidance', nourishing further EVAR innovation without formalized institutions, evidence, training or guidelines. However, the lack of a shared context limits the transfer of evolving knowledge across hospital boundaries.

Debating science policy in the physics classroom.

NASA Astrophysics Data System (ADS)

Mayer, Shannon

2010-03-01

It is critically important that national and international science policy be scientifically grounded. To this end, the next generation of scientists and engineers will need to be technically competent, effective communicators of science, and engaged advisors in the debate and formulation of science policy. We describe three science policy debates developed for the physics classroom aimed at encouraging students to draw connections between their developing technical expertise and important science policy issues. The first debate considers the proposal for a 450-megawatt wind farm on public lands in Nantucket Sound and fits naturally into the curriculum related to alternative forms of energy production. The second debate considers national fuel-economy standards for sport-utility vehicles and can be incorporated into the curriculum related to heat engines. The third debate, suitable for the curriculum in optics, considers solid state lighting and implications of recent United States legislation that places stringent new energy-efficiency and reliability requirements on conventional lighting. The technical foundation for each of these debates fits naturally into the undergraduate physics curriculum and the material is suitable for a wide range of physics courses, including general science courses for non-majors.

DOE Advanced Scientific Computing Advisory Subcommittee (ASCAC) Report: Top Ten Exascale Research Challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lucas, Robert; Ang, James; Bergman, Keren

2014-02-10

Exascale computing systems are essential for the scientific fields that will transform the 21st century global economy, including energy, biotechnology, nanotechnology, and materials science. Progress in these fields is predicated on the ability to perform advanced scientific and engineering simulations, and analyze the deluge of data. On July 29, 2013, ASCAC was charged by Patricia Dehmer, the Acting Director of the Office of Science, to assemble a subcommittee to provide advice on exascale computing. This subcommittee was directed to return a list of no more than ten technical approaches (hardware and software) that will enable the development of a systemmore » that achieves the Department's goals for exascale computing. Numerous reports over the past few years have documented the technical challenges and the non¬-viability of simply scaling existing computer designs to reach exascale. The technical challenges revolve around energy consumption, memory performance, resilience, extreme concurrency, and big data. Drawing from these reports and more recent experience, this ASCAC subcommittee has identified the top ten computing technology advancements that are critical to making a capable, economically viable, exascale system.« less

Storying energy consumption: Collective video storytelling in energy efficiency social marketing.

PubMed

Gordon, Ross; Waitt, Gordon; Cooper, Paul; Butler, Katherine

2018-05-01

Despite calls for more socio-technical research on energy, there is little practical advice to how narratives collected through qualitative research may be melded with technical knowledge from the physical sciences such as engineering and then applied in energy efficiency social action strategies. This is despite established knowledge in the environmental management literature about domestic energy use regarding the utility of social practice theory and narrative framings that socialise everyday consumption. Storytelling is positioned in this paper both as a focus for socio-technical energy research, and as one potential practical tool that can arguably enhance energy efficiency interventions. We draw upon the literature on everyday social practices, and storytelling, to present our framework called 'collective video storytelling' that combines scientific and lay knowledge about domestic energy use to offer a practical tool for energy efficiency management. Collective video storytelling is discussed in the context of Energy+Illawarra, a 3-year cross-disciplinary collaboration between social marketers, human geographers, and engineers to target energy behavioural change within older low-income households in regional NSW, Australia. Copyright © 2018 Elsevier Ltd. All rights reserved.

Pan-cancer analysis reveals technical artifacts in TCGA germline variant calls.

PubMed

Buckley, Alexandra R; Standish, Kristopher A; Bhutani, Kunal; Ideker, Trey; Lasken, Roger S; Carter, Hannah; Harismendy, Olivier; Schork, Nicholas J

2017-06-12

Cancer research to date has largely focused on somatically acquired genetic aberrations. In contrast, the degree to which germline, or inherited, variation contributes to tumorigenesis remains unclear, possibly due to a lack of accessible germline variant data. Here we called germline variants on 9618 cases from The Cancer Genome Atlas (TCGA) database representing 31 cancer types. We identified batch effects affecting loss of function (LOF) variant calls that can be traced back to differences in the way the sequence data were generated both within and across cancer types. Overall, LOF indel calls were more sensitive to technical artifacts than LOF Single Nucleotide Variant (SNV) calls. In particular, whole genome amplification of DNA prior to sequencing led to an artificially increased burden of LOF indel calls, which confounded association analyses relating germline variants to tumor type despite stringent indel filtering strategies. The samples affected by these technical artifacts include all acute myeloid leukemia and practically all ovarian cancer samples. We demonstrate how technical artifacts induced by whole genome amplification of DNA can lead to false positive germline-tumor type associations and suggest TCGA whole genome amplified samples be used with caution. This study draws attention to the need to be sensitive to problems associated with a lack of uniformity in data generation in TCGA data.

Guidelines for producing training films and videos.

PubMed

Harper, P B

1991-01-01

Drawing from experience in producing a film on the surgical procedure of female sterilization, 4 guidelines to technical film production for training purposes are presented and discussed in this paper. In order of presentation in the text, the paper 1st encourages identifying and securing a technical expert, then clearly identifying steps of the technical procedure, involving trainees and trainers in the production process, and working with experienced producers, scriptwriters, and crew members. Returning to the 1st guideline, the technical advisor will have a central presence during all photography and editing, and ideally should not have any personal investment in the procedure being shown. Prior to script finalization and sorting, research is urged to ensure concrete procedural steps. Printed materials, slides, interviews of experienced clinicians, procedure observation, and test videotape shooting may be called upon and employed as parts of the research phase. Trainees should participate during preliminary research, script development, and pretesting of early film versions, their suggestions for change incorporated where appropriate in the final version. On the final point of securing experienced workers, country nationals sensitive to relevant cultural and background dynamics should be included in the team. The special concerns of airport security regulation and customs requirements knowledge are essential, as well as their attention to assuring adequate on-site electricity for camera equipment.

Patient- and family-centered care of children in the emergency department.

PubMed

O'Malley, Patricia J; Brown, Kathleen; Krug, Steven E

2008-08-01

Patient- and family-centered care is an innovative approach to the planning, delivery, and evaluation of health care that is grounded in a mutually beneficial partnership among patients, families, and health care professionals. Providing patient- and family-centered care to children in the emergency department setting presents many opportunities and challenges. This technical report draws on previously published policy statements and reports, reviews the current literature, and describes the present state of practice and research regarding patient- and family-centered care for children in the emergency department setting as well as some of the complexities of providing such care. This technical report has been endorsed by the Academic Pediatric Association (formerly the Ambulatory Pediatric Association), the American College of Osteopathic Emergency Physicians, the National Association of Emergency Medical Technicians, the Institute for Family-Centered Care, and the American College of Emergency Physicians. This report is also supported by the Emergency Nurses Association.

Gas turbine engines and transmissions for bus demonstration programs. Technical status report, 31 July 1979--31 October 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigro, D.N.

1979-11-01

The report summarizes the DDA activities for the effort performed on the procurement and delivery of eleven Allison GT 404-4 gas turbine engines and five HT740CT and six V730CT Allison automatic transmissions and the required associated software. The contract requires the delivery of the engines and transmissions for the Greyhound and Transit Coaches, respectively. In addition, software items such as cost reports, technical reports, installation drawings, acceptance test data and parts lists are required. A recent decision by the DOE will modify the build configuration for the last four (4) Transit Coach engines. It was decided by the DOE atmore » a meeting in Washington, DC on March 28, 1979 with representatives from DDA, NASA/LeRC, JPL and Booz-Allen and Hamilton that these engines are to be built with ceramic regenerators. (TFD)« less

Application for certification, 1990 model-year light-duty vehicles - US Technical Research Company (Peugeot)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification, 1989 model year light-duty vehicles - US Technical Research Company (Peugeot)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Photographic Holography

NASA Astrophysics Data System (ADS)

Benton, Stephen A.

1983-10-01

During this Symposium, we will be discussing technology in the service of a central human need: the need for an interesting life. This need embraces entertainment, as well as education, enlightenment, and adaptation to the sweeping changes in which our technology is itself imbedded. And while our theme centers on optics, that is only one of the many media technologies that are overlapping more widely in order to meet changing social needs. This Symposium has sprung from a sense of shared curiosities and concerns with those technologies, and grown to a gradual recognition of a substantial underlying domain of common professional interests. We are grateful that the SPIE has been able to respond to Chris Outwater's proposal, and to offer a forum for this experiment in drawing together an unorthodox range of interests within a technical context. We hope that the program will help illuminate a fascinating intersection of technical competences and human needs.

The need for sustainability and alignment of future support for National Immunization Technical Advisory Groups (NITAGs) in low and middle-income countries.

PubMed

Howard, Natasha; Bell, Sadie; Walls, Helen; Blanchard, Laurence; Brenzel, Logan; Jit, Mark; Mounier-Jack, Sandra

2018-02-22

National Immunisation Technical Advisory Groups (NITAGs) provide independent guidance to health ministries to support evidence-based and nationally relevant immunisation decisions. We examined NITAGs' value, sustainability, and need for support in low and middle-income countries, drawing from a mixed-methods study including 130 global and national-level key informant interviews. NITAGs were particularly valued for providing independent and nationally owned evidence-based decision-making (EBDM), but needed to be integrated within national processes to effectively balance independence and influence. Participants agreed that most NITAGs, being relatively new, would need developmental and strengthening support for at least a decade. While national governments could support NITAG functioning, external support is likely needed for requisite capacity building. This might come from Gavi mechanisms and WHO, but would require alignment among stakeholders to be effective.

Polio eradication is just over the horizon: the challenges of global resource mobilization.

PubMed

Pirio, Gregory Alonso; Kaufmann, Judith

2010-01-01

This study draws lessons from the resource mobilization experiences of the Global Polio Eradication Initiative (GPEI). As the GPEI launched its eradication effort in 1988, it underestimated both the difficulty and the costs of the campaign. Advocacy for resource mobilization came as an afterthought in the late 1990s, when achieving eradication by the target date of 2000 began to look doubtful. The reality of funding shortfalls undercutting eradication leads to the conclusion that advocacy for resource mobilization is as central to operations as are scientific and technical factors.

Department of Defense operational applications of wind measurements

NASA Technical Reports Server (NTRS)

Ramsay, Allan C.

1985-01-01

A stated objective for this symposium is to identify requirements for global wind measurements. This paper will draw from recent reports which considered the impact of over 100 environmental factors known to affect military operations. A conclusion that can be drawn from those analyses is that one environmental factor, atmospheric wind, has an operational impact on each of the 48 mission areas examined. This paper will characterize the impact of wind on the various mission areas and will define and summarize both 'technical' and 'operational' requirements for wind intelligence.

Stampless fabrication of sheet bars using disposable templates

NASA Astrophysics Data System (ADS)

Smolentsev, V. P.; Safonov, S. V.; Smolentsev, E. V.; Fedonin, O. N.

2016-04-01

The article is devoted to the new method of small-scale fabrication of sheet bars. The procedure is performed by using disposable overlay templates, or those associated with a sheet, which parameters are obtained directly from the drawing. The proposed method used as a substitution of die cutting enables to intensify the preparatory technological process, which is particularly effective when launching the market-oriented items into production. It significantly increases the competitiveness of mechanical engineering and creates the conditions for technical support of present-day flexible production systems.

The NASA Herschel Science Center

NASA Astrophysics Data System (ADS)

Helou, G.

2005-12-01

NASA has set aside resources in support of US-based scientists working on analysis and interpretation of data from Herschel, and has designated IPAC as the home of the NASA Herschel Science Center (NHSC). In supporting the US-based Herschel community, NHSC will draw on its experience (ISO, Spitzer and other missions) as well as a close working relation with the Herschel mission and instrument expertise both in Europe and in the U.S. The support covers technical and logistical aspects as well as data analysis funding, to be handled in large measure following the Spitzer funding model.

SI (Metric) handbook

NASA Technical Reports Server (NTRS)

Artusa, Elisa A.

1994-01-01

This guide provides information for an understanding of SI units, symbols, and prefixes; style and usage in documentation in both the US and in the international business community; conversion techniques; limits, fits, and tolerance data; and drawing and technical writing guidelines. Also provided is information of SI usage for specialized applications like data processing and computer programming, science, engineering, and construction. Related information in the appendixes include legislative documents, historical and biographical data, a list of metric documentation, rules for determining significant digits and rounding, conversion factors, shorthand notation, and a unit index.

Space educators' handbook

NASA Technical Reports Server (NTRS)

Woodfill, Jerry

1992-01-01

The Space Educators' Handbook is a collection of space exploration information available on Hypercard as a space education reference book. Ranging from early dreams of space ships to current manned missions, the more than four thousand cards include entries of statistics, historical facts and anecdotes, technical articles, accounts of NASA missions from Mercury through the space shuttle, biographical information on women and men who have contributed to space exploration, scientific facts, and various other space-related data. The means of presenting the data range from cartoons and drawings to lists and narratives, some briefly quoted and some reproduced in full.

Effect of using of IEEJ (Power and Energy) Technical Papers on Engineering Education

NASA Astrophysics Data System (ADS)

Shirakawa, Shingo

The IEEJ has published useful papers for electric power and energy systems. These papers published in IEEJ transactions contribute to special engineers to receive the doctor degree or understand newly developed technologies etc. But, it is very important to know the impression of young students about IEEJ transactions papers considering the technology transfer. This paper describes reaction comments of next generation university students under learning engineering of design and drawing of power equipments in 2009 after the Lehman Shock (the Lehman Brothers' worldwide economical collapse dated Sept. 15 2008).

Solar domestic hot water system installed at Texas City, Texas

NASA Technical Reports Server (NTRS)

1980-01-01

This is the final technical report of the solar energy system located at LaQuinta Motor Inn, Texas City, Texas. The system was designed to supply 63 percent of the total hot water load for a new 98 unit motor inn. The solar energy system consists of a 2100 square feet Raypack liquid flat plate collector subsystem and a 2500 gallon storage subsystem circulating hot water producing 3.67 x 10 to the 8th power Btu/year. Abstracts from the site files, specification references, drawings, installation, operation, and maintenance instructions are included.

Self-Lubricating Composite Bearing Materials - Part 2: Corrosion Preventive Solid Lubrication of the ASALM Missile Hydraulic Actuator Bearings

DTIC Science & Technology

1979-12-01

WRIGHT-PATTERSON AIR FORCE BASE, OHIO 45433 C* 80 5 2 024 i " 774o ;0xvw- NOTICE When Government drawings, specifications, or other data are used for any...or conveying any rights or permission to manufacture, use , or sell any patented invention that may in any way be related thereto. This technical...if the addressee is no longer employed by your organization please notify AFML/MBT,W-PAFB, OH 45433 to help us maintain a current mailing list". Copies

Common marsh plants of the United States and Canada

USGS Publications Warehouse

Hotchkiss, Neil

1970-01-01

This is the fourth of a series of publications on field identification of North American marsh and water plants. It describes the emergent and semiemergent plants most likely to be found in inland and coastal marshes. It omits hundreds of uncommon marsh plants and plants less characteristic of marshes than of marsh edges, lake and stream shores, or wet meadows. The first of the series, "Pondweeds and Pondweedlike Plants of Eastern North America," Circular 187, was broadened in scope as Resource Publication 44, "Underwater and Floating-leaved Plants of the United States and Canada," and is superseded by it. The present publication, widens the scope of "Bulrushes and Bulrushlike Plants of Eastern North America," Circular 221, and contains most of the species listed therein. This guide is designed for identification of marsh plants without recourse to technical botanical keys. To use it, read pages 1 to 4 and then look at the drawings. To identify a plant, find the group in which it fits, then find a drawing and description that match it.

Do we need more famous fluid dynamicists?

NASA Astrophysics Data System (ADS)

Reckinger, Shanon; Brinkman, Bethany; Fenner, Raenita; London, Mara

2015-11-01

One of the main reasons students do not join the STEM fields is that they lack interest in technical topics. But do people (young students, the general public, or even our own engineering students) know what an engineer is and/or does? In this talk, results from a recent study on the perceptions of different professions will be presented. The study was designed based off of ``draw-an-engineer'' and ``draw-a-scientist'' tests used on elementary schools kids. The idea is to have participants visualize professionals (engineers, lawyers, and medical doctors were chosen for this study), and determine if there are any patterns within different demographic groups. The demographics that were focused on include gender, race, age, college major, highest level of education, and profession. One of the main findings of this survey was that participants had the most difficult time visualizing an engineer compared to a lawyer or a medical doctor. Therefore, maybe we need more famous engineers (and fluid dynamicists)?

Subjective education in analytic training: drawing on values from the art academy.

PubMed

Dougherty, Mary

2008-11-01

Kernberg and others have observed that psychoanalytic education has tended to promote the acquisition of theoretical knowledge and clinical technique within an atmosphere of indoctrination rather than of exploration. As a corrective, he proposed four models that correspond to values in psychoanalytic education: the art academy, the technical trade school, the religious seminary and the university. He commended models of the university and art academy to our collective attention because of their combined effectiveness in providing for the objective and subjective education of candidates: the university model for its capacity to provide a critical sense of a wide range of theories in an atmosphere tolerating debate and difference, and the art academy model for its capacity to facilitate the expression of individual creativity. In this paper, I will explore the art academy model for correspondences between artistic and analytic trainings that can enhance the development of the creative subjectivity of psychoanalytic candidates. I will draw additional correspondences between analytic and artistic learning that can enhance psychoanalytic education.

Association of Physical and Technical Activities With Partial Match Status in a Soccer Professional Team.

PubMed

Moalla, Wassim; Fessi, Mohamed Saieffedin; Makni, Emna; Dellal, Alexandre; Filetti, Cristoforo; Di Salvo, Valter; Chamari, Karim

2018-06-01

Moalla, W, Fessi, MS, Makni, E, Dellal, A, Filetti, C, Di Salvo, V, and Chamari, K. Association of physical and technical activities with partial match status in a soccer professional team. J Strength Cond Res 32(6): 1708-1714, 2018-The purpose of this study was to examine the association between physical and technical activities and partial match status (winning, drawing, or losing) in a professional soccer team over 2 seasons. Physical and technical activities of 52 official matches were collected and analyzed at each 15-minute interval, for each half (45 minutes), and full match (90 minutes) using a multiple-camera computerized tracking system. The results indicated that according to full match outcome: winning status was characterized by players covering more total distance (p ≤ 0.05) and low-intensity running (<14.4 km·h) (p ≤ 0.05), whereas, losing status induced more sprinting (≥25.2 km·h) (p < 0.01) and high-intensity running (≥19.8 km·h) (p ≤ 0.05). However, according to partial match status (i.e., 15 minutes and half time), players covered more distance for all running intensities while winning (p < 0.01). Technical match performance scores were not influenced by match status. In conclusion, the present study showed that the physical activities including high-intensity running and total distance covered were related to the match status, whereas technical activities were not. The overall outcome shows that higher physical activity was associated with winning partial match periods. This approach highlights the importance of physical fitness in soccer and may help coaches to better modulate players' roles and team tactical organization throughout the match.

EVA tools and equipment reference book

NASA Technical Reports Server (NTRS)

Fullerton, R. K.

1993-01-01

This document contains a mixture of tools and equipment used throughout the space shuttle-based extravehicular activity (EVA) program. Promising items which have reached the prototype stage of development are also included, but should not be considered certified ready for flight. Each item is described with a photo, a written discussion, technical specifications, dimensional drawings, and points of contact for additional information. Numbers on the upper left-hand corner of each photo may be used to order specific pictures from NASA and contractor photo libraries. Points of contact were classified as either operational or technical. An operational contact is an engineer from JSC Mission Operations Directorate who is familiar with the basic function and on-orbit use of the tool. A technical contact would be the best source of detailed technical specifications and is typically the NASA subsystem manager. The technical information table for each item uses the following terms to describe the availability or status of each hardware item: Standard - Flown on every mission as standard manifest; Flight specific - Potentially available for flight, not flown every mission (flight certification cannot be guaranteed and recertification may be required); Reference only - Item no longer in active inventory or not recommended for future use, some items may be too application-specific for general use; and Developmental - In the prototype stage only and not yet available for flight. The current availability and certification of any flight-specific tool should be verified with the technical point of contact. Those tools built and fit checked for Hubble Space Telescope maintenance are program dedicated and are not available to other customers. Other customers may have identical tools built from the existing, already certified designs as an optional service.

Global Spent Fuel Logistics Systems Study (GSFLS). Volume 3A. GSFLS technical analysis (appendix). Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kriger, A.

1978-01-31

This report is a part of the interim report documentation for the Global Spent Fuel Logistics System (GSFLS) study. The technical and financial considerations underlying a global spent fuel logistics systems have been studied and are reported. The Pacific Basin is used as a model throughout this report; however the stated methodology and, in many cases, considerations and conclusions are applicable to other global regions. Spent fuel discharge profiles for Pacific Basin Countries were used to determine the technical systems requirements for alternative concepts. Functional analyses and flows were generated to define both system design requirements and logistics parameters. Amore » technology review was made to ascertain the state-of-the-art of relevant GSFLS technical systems. Modular GSFLS facility designs were developed using the information generated from the functional analysis and technology review. The modular facility designs were used as a basis for siting and cost estimates for various GSFLS alternatives. Various GSFLS concepts were analyzed from a financial and economic perspective in order to provide total concepts costs and ascertain financial and economic sensitivities to key GSFLS variations. Results of the study include quantification of GSFLS facility and hardware requirements; drawings of relevant GSFLS facility designs; system cost estimates; financial reports - including user service charges; and comparative analyses of various GSFLS alternatives.« less

[Environment, Trauma and Technical Innovations: Three Links Between Donald W. Winnicott and Sándor Ferenczi].

PubMed

Gutiérrez-Peláez, Miguel; Herrera-Pardo, Emilio

Throughout this paper, the theoretical and clinical approaches of D.W. Winnicott are reviewed in order to reread the written production of Sándor Ferenczi. Winnicott's clinical and theoretical concepts allow returning to Ferenczi and rescuing aspects of his work that had been silenced in the psychoanalytic community. Ferenczi, in turn, is one that holds his presence in Winnicott's thought. Even though there are few times in which he cites Ferenczi in his work, it is possible to draw clear relationships between both theories. Three main issues are addressed: the role of the environment as active; the primitive traumatic event in which there is no one that has experience of it, and psychoanalysis as the place to experience that which happened in the first months of life for the first time; and, finally, severe pathologies and psychoses: technical innovations in Winnicott and Ferenczi for the treatment of psychotic and borderline patients. It is concluded that the theoretical and technical developments of Winnicott serve to illuminate a retrospective reading of Ferenczi. Copyright © 2016 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

The Starflight Handbook: A Pioneer's Guide to Interstellar Travel

NASA Astrophysics Data System (ADS)

Mallove, Eugene F.; Matloff, Gregory L.

1989-06-01

The Starflight Handbook A Pioneer's Guide to Interstellar Travel "The Starflight Handbook is an indispensable compendium of the many and varied methods for traversing the vast interstellar gulf--don't leave the Solar System without it!" --Robert Forward "Very sensible, very complete and useful. Its good use of references and technical `sidebars' adds to the book and allows the nontechnical text to be used by ordinary readers in an easy fashion. I certainly would recommend this book to anyone doing any thinking at all about interstellar flight or the notion of possibilities of contacts between hypothetical civilizations in different stat systems." --Louis Friedman Executive Director, The Planetary Society The Starflight Handbook is the first and only compendium on planet Earth of the radical new technologies now on the drawing boards of some of our smartest and most imaginative space scientists and engineers. Scientists and engineers as well as general readers will be captivated by its: In-depth discussions of everything from nuclear pulse propulsion engines to in-flight navigation, in flowing, non-technical language Sidebars and appendices cover technical and mathematical concepts in detail Seventy-five elegant and enlightening illustrations depicting starships and their hardware

Technical and Economic Aspects of Designing an Efficient Room Air-Conditioner Program in India

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abhyankar, Nikit; Shah, Nihar; Phadke, Amol

Several studies have projected a massive increase in the demand for air conditioners (ACs) over the next two decades in India. By 2030, room ACs could add 140 GW to the peak load, equivalent to over 30% of the total projected peak load. Therefore, there is significant interest among policymakers, regulators, and utilities in managing room AC demand by enhancing energy efficiency. Building on the historical success of the Indian Bureau of Energy Efficiency’s star-labeling program, Energy Efficiency Services Limited recently announced a program to accelerate the sale of efficient room ACs using bulk procurement, similar to their successful UJALAmore » light-emitting diode (LED) bulk procurement program. This report discusses some of the key considerations in designing a bulk procurement or financial incentive program for enhancing room AC efficiency in India. We draw upon our previous research to demonstrate the overall technical potential and price impact of room AC efficiency improvement and its technical feasibility in India. We also discuss the importance of using low global warming potential (GWP) refrigerants and smart AC equipment that is demand response (DR) ready.« less

Tanks Focus Area Site Needs Assessment - FY 2001

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, Robert W.; Josephson, Gary B.; Westsik, Joseph H.

2001-04-30

The TFA uses a systematic process for developing its annual program that draws from the tanks science and technology development needs expressed by the five DOE tank waste sites. TFA's annual program development process is iterative and involves the following steps: Collection of site needs; Needs analysis; Development of technical responses and initial prioritization; Refinement of the program for the next fiscal year; Formulation of the Corporate Review Budget (CRB); Preparation of Program Execution Guidance (PEG) for the next FY Revision of the Multiyear Program Plan (MYPP). This document describes the outcomes of the first phase of this process, frommore » collection of site needs to the initial prioritization of technical activities. The TFA received site needs in October - December 2000. A total of 170 site needs were received, an increase of 30 over the previous year. The needs were analyzed and integrated, where appropriate. Sixty-six distinct technical responses were drafted and prioritized. In addition, seven strategic tasks were approved to compete for available funding in FY 2002 and FY 2003. Draft technical responses were prepared and provided to the TFA Site Representatives and the TFA User Steering Group (USG) for their review and comment. These responses were discussed at a March 15, 2001, meeting where the TFA Management Team established the priority listing in preparation for input to the DOE Office of Science and Technology (OST) budget process. At the time of publication of this document, the TFA continues to finalize technical responses as directed by the TFA Management Team and clarify the intended work scopes for FY 2002 and FY 2003.« less

Design Automation Using Script Languages. High-Level CAD Templates in Non-Parametric Programs

NASA Astrophysics Data System (ADS)

Moreno, R.; Bazán, A. M.

2017-10-01

The main purpose of this work is to study the advantages offered by the application of traditional techniques of technical drawing in processes for automation of the design, with non-parametric CAD programs, provided with scripting languages. Given that an example drawing can be solved with traditional step-by-step detailed procedures, is possible to do the same with CAD applications and to generalize it later, incorporating references. In today’s modern CAD applications, there are striking absences of solutions for building engineering: oblique projections (military and cavalier), 3D modelling of complex stairs, roofs, furniture, and so on. The use of geometric references (using variables in script languages) and their incorporation into high-level CAD templates allows the automation of processes. Instead of repeatedly creating similar designs or modifying their data, users should be able to use these templates to generate future variations of the same design. This paper presents the automation process of several complex drawing examples based on CAD script files aided with parametric geometry calculation tools. The proposed method allows us to solve complex geometry designs not currently incorporated in the current CAD applications and to subsequently create other new derivatives without user intervention. Automation in the generation of complex designs not only saves time but also increases the quality of the presentations and reduces the possibility of human errors.

Immunodiagnosis of childhood malignancies.

PubMed

Parham, D M; Holt, H

1999-09-01

Immunodiagnosis utilizing immunohistochemical techniques is currently the most commonly utilized and readily available method of ancillary diagnosis in pediatric oncopathology. The methodology comprises relatively simple steps, based on straightforward biologic concepts, and the reagents used are generally well characterized and widely used. The principle of cancer immunodiagnosis is based on the determination of neoplastic lineage using detection of proteins typical of cell differentiation pathways. Methodology sensitivity varies and has become greater with each new generation of tests, but technical draw-backs should be considered to avoid excessive background or nonspecific results. Automated instrumentation offers a degree of accuracy and reproducibility not easily attainable by manual methods.

Reflections on Klein's radical notion of phantasy and its implications for analytic practice.

PubMed

Blass, Rachel B

2017-06-01

Analysts may incorporate many of Melanie Klein's important contributions (e.g., on preoedipal dynamics, envy, and projective identification) without transforming their basic analytic approach. In this paper I argue that adopting the Kleinian notion of unconscious phantasy is transformative. While it is grounded in Freud's thinking and draws out something essential to his work, this notion of phantasy introduces a radical change that defines Kleinian thinking and practice and significantly impacts the analyst's basic clinical approach. This impact and its technical implications in the analytic situation are illustrated and discussed. Copyright © 2017 Institute of Psychoanalysis.

Gas turbine engines and transmissions for bus demonstration program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigro, D.N.

1981-11-01

This final report is to fulfill the contractural requirements of Contract DE-AC02-78CS54867 which required the delivery of 11 Allison GT 404-4 Industrial Gas Turbine Engines and five HT740CT and six V730CT Allison Automatic Transmissions for the Greyhound and Transit Coaches, respectively. In addition, software items such as cost reports, technical reports, installation drawings, acceptance test data and parts lists were required. Engine and transmission deliveries were completed with shipment of the last power package on 11 April 1980. Software items were submitted when required during the performance period of this contract.

Combat games

NASA Technical Reports Server (NTRS)

Ardema, M. D.; Heymann, M.; Rajan, N.

1985-01-01

A mathematical formulation is proposed of a combat game between two opponents with offensive capabilities and offensive objective is proposed. Resolution of the combat involves solving two differential games with state constraints. Depending on the game dynamics and parameters, the combat can terminate in one of four ways: the first player wins; the second player wins; a draw (neither wins); or joint capture. In the first two cases, the optimal strategies of the two players are determined from suitable zero-sum games, whereas in the latter two the relevant games are nonzero-sum. Further, to avoid certain technical difficulties, the concept of a delta-combat game is introduced.

The State and Future of the Primary Care Behavioral Health Model of Service Delivery Workforce.

PubMed

Serrano, Neftali; Cordes, Colleen; Cubic, Barbara; Daub, Suzanne

2018-06-01

The growth of the Primary Care Behavioral Health model (PCBH) nationally has highlighted and created a workforce development challenge given that most mental health professionals are not trained for primary care specialization. This work provides a review of the current efforts to retrain mental health professionals to fulfill roles as Behavioral Health Consultants (BHCs) including certificate programs, technical assistance programs, literature and on-the-job training, as well as detail the future needs of the workforce if the model is to sustainably proliferate. Eight recommendations are offered including: (1) the development of an interprofessional certification body for PCBH training criteria, (2) integration of PCBH model specific curricula in graduate studies, (3) integration of program development skill building in curricula, (4) efforts to develop faculty for PCBH model awareness, (5) intentional efforts to draw students to graduate programs for PCBH model training, (6) a national employment clearinghouse, (7) efforts to coalesce current knowledge around the provision of technical assistance to sites, and (8) workforce specific research efforts.

It's not just pills and potions? depoliticising health inequalities policy in England.

PubMed

Qureshi, Kaveri

2013-04-01

In England, health inequalities policy shifted during the Labour term (1997-2010) from initially strong commitments to tackling the 'upstream' social determinants of health to a technically-driven emphasis on lifestyle risk factors and healthcare access. This multi-sited study, based in and around Westminster (2006-2007), extends our understanding of how political context influences policy-making by drawing from anthropological studies of policy. Qualitative material from central government is put into conversation with theory concerning policy as zones of practices. The paper explores the bristly process through which public health, healthcare and corporate interests vied to shape the political agenda for health inequalities; the selective use of evidence by civil servants in accordance with their perceptions of what politicians conceive to be electorally palatable; the silencing of critique of the dominant narrative about evidence-based policy; and how technical aids developed a life of their own - as a result of which, health inequalities policy ended up being depoliticised.

Programming of Urban Revitalization

NASA Astrophysics Data System (ADS)

Biliński, Tadeusz

2016-12-01

The planning stage of the investment-construction process is of a crucial importance. Its overall impact on the costs, construction time and the quality of design solutions is huge. However, in practice, little attention is given to this pre-design stage, except for public buildings or other buildings of particular importance. In consequence, the results of investment and construction activities are unsatisfactory. Therefore, the issue has been given careful consideration in this paper. The paper discusses the issue of programming urban revitalization, emphasizing its socio-economic importance. To illustrate the complexity of revitalization projects planning, the author draws attention to social, economic, technical and organisational factors, such as public participation, reorganization and revaluation of land use planning, rationalization of energy use, organization and management of revitalization processes, as well as technical progress. Summarising the paper, the author concludes that in order to improve the quality of life of town residents and to protect material national heritage, it is indispensable to continuously revitalize subsequent town areas.

Physiological approach to optimal stereographic game programming: a technical guide

NASA Astrophysics Data System (ADS)

Martens, William L.; McRuer, Robert; Childs, C. Timothy; Viirree, Erik

1996-04-01

With the advent of mass distribution of consumer VR games comes an imperative to set health and safety standards for the hardware and software used to deliver stereographic content. This is particularly important for game developers who intend to present this stereographic content via head-mounted display (HMD). The visual discomfort that is commonly reported by the user of HMD-based VR games presumably could be kept to a minimum if game developers were provided with standards for the display of stereographic imagery. In this paper, we draw upon both results of research in binocular vision and practical methods from clinical optometry to develop some technical guidelines for programming stereographic games that have the end user's comfort and safety in mind. This paper will provide generate strategies for user- centered implementation of 3D virtual worlds, as well as pictorial examples demonstrating a natural means for rendering stereographic imagery more comfortable to view in games employing first-person perspective.

Regulatory Barriers Blocking Standardization of Interoperability

PubMed Central

Zhong, Daidi; Kirwan, Michael J

2013-01-01

Developing and implementing a set of personal health device interoperability standards is key to cultivating a healthy global industry ecosystem. The standardization organizations, including the Institute of Electrical and Electronics Engineers 11073 Personal Health Device Workgroup (IEEE 11073-PHD WG) and Continua Health Alliance, are striving for this purpose. However, factors like the medial device regulation, health policy, and market reality have placed non-technical barriers over the adoption of technical standards throughout the industry. These barriers have significantly impaired the motivations of consumer device vendors who desire to enter the personal health market and the overall success of personal health industry ecosystem. In this paper, we present the affect that these barriers have placed on the health ecosystem. This requires immediate action from policy makers and other stakeholders. The current regulatory policy needs to be updated to reflect the reality and demand of consumer health industry. Our hope is that this paper will draw wide consensus amongst its readers, policy makers, and other stakeholders. PMID:25098204

Regulatory barriers blocking standardization of interoperability.

PubMed

Zhong, Daidi; Kirwan, Michael J; Duan, Xiaolian

2013-07-12

Developing and implementing a set of personal health device interoperability standards is key to cultivating a healthy global industry ecosystem. The standardization organizations, including the Institute of Electrical and Electronics Engineers 11073 Personal Health Device Workgroup (IEEE 11073-PHD WG) and Continua Health Alliance, are striving for this purpose. However, factors like the medial device regulation, health policy, and market reality have placed non-technical barriers over the adoption of technical standards throughout the industry. These barriers have significantly impaired the motivations of consumer device vendors who desire to enter the personal health market and the overall success of personal health industry ecosystem. In this paper, we present the affect that these barriers have placed on the health ecosystem. This requires immediate action from policy makers and other stakeholders. The current regulatory policy needs to be updated to reflect the reality and demand of consumer health industry. Our hope is that this paper will draw wide consensus amongst its readers, policy makers, and other stakeholders.

Asilomar moments: formative framings in recombinant DNA and solar climate engineering research.

PubMed

Schäfer, Stefan; Low, Sean

2014-12-28

We examine the claim that in governance for solar climate engineering research, and especially field tests, there is no need for external governance beyond existing mechanisms such as peer review and environmental impact assessments that aim to assess technically defined risks to the physical environment. By drawing on the historical debate on recombinant DNA research, we show that defining risks is not a technical question but a complex process of narrative formation. Governance emerges from within, and as a response to, narratives of what is at stake in a debate. In applying this finding to the case of climate engineering, we find that the emerging narrative differs starkly from the narrative that gave meaning to rDNA technology during its formative period, with important implications for governance. While the narrative of rDNA technology was closed down to narrowly focus on technical risks, that of climate engineering continues to open up and includes social, political and ethical issues. This suggests that, in order to be legitimate, governance must take into account this broad perception of what constitutes the relevant issues and risks of climate engineering, requiring governance that goes beyond existing mechanisms that focus on technical risks. Even small-scale field tests with negligible impacts on the physical environment warrant additional governance as they raise broader concerns that go beyond the immediate impacts of individual experiments. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Action learning across the decades.

PubMed

Eason, Ken

2017-05-02

Purpose The purpose of this paper is to explore how action learning concepts were used in two healthcare projects undertaken many decades apart. The specific purpose in both cases was to examine how action learning can contribute to shared learning across key stakeholders in a complex socio-technical system. In each case study, action learning supported joint design programmes and the sharing of perspectives about the complex system under investigation. Design/methodology/approach Two action learning projects are described: first, the Hospital Internal Communications (HIC) project led by Reg Revans in the 1960s. Senior staff in ten London hospitals formed action learning teams to address communication issues. Second, in the Better Outcomes for People with Learning Disabilities: Transforming Care (BOLDTC) project, videoconferencing equipment enabled people with learning disabilities to increase their opportunities to communicate. A mutual learning process was established to enable stakeholders to explore the potential of the technical system to improve individual care. Findings The HIC project demonstrated the importance of evidence being shared between team members and that action had to engage the larger healthcare system outside the hospital. The BOLDTC project confirmed the continuing relevance of action learning to healthcare today. Mutual learning was achieved between health and social care specialists and technologists. Originality/value This work draws together the socio-technical systems tradition (considering both social and technical issues in organisations) and action learning to demonstrate that complex systems development needs to be undertaken as a learning process in which action provides the fuel for learning and design.

[Producing technical drawings using the feet--a special work site for a thalidomide-damaged technical draftswoman].

PubMed

Fischbach, F

1989-05-01

Persons with upper limb deficiency do not find it easy to lead a somewhat "normal" private, occupational and social life. True, society offers many kinds of assistance and support; it nevertheless is very much a matter of how the individual concerned reacts to the positive and negative influences and imponderabilities encountered. The present report sets out the efforts of a thalidomide-affected young woman who, in the face of numerous obstacles, left nothing untried to create a life basis of her own by obtaining a good vocational qualification as a technical draftswoman, regardless of her congenital upper limb amputation. Her success is proof enough that she chose the right course. This example, in more general terms, should perhaps be considered a prompting for society, on the one hand, to undertake the endeavour of providing quality assistance even in extreme situations and, on the other, to be prepared to have confidence even in those with very severe physical disablement to be able to accomplish goals which at the first glance may appear "nonsensical", such as a desire to be trained as a technical draftswoman even though one's hands are missing. The account not least shows the positive impact help and self-help may have in the rehabilitation of very severely disabled persons. The disabled person's reward primarily lies in the sense of independence achieved and in financial self-reliance, which in turn generate a sense of feeling free inwardly and outwardly.

Rawification and the careful generation of open government data.

PubMed

Denis, Jérôme; Goëta, Samuel

2017-10-01

Drawing on a two-year ethnographic study within several French administrations involved in open data programs, this article aims to investigate the conditions of the release of government data - the rawness of which open data policies require. This article describes two sets of phenomena. First, far from being taken for granted, open data emerge in administrations through a progressive process that entails uncertain collective inquiries and extraction work. Second, the opening process draws on a series of transformations, as data are modified to satisfy an important criterion of open data policies: the need for both human and technical intelligibility. There are organizational consequences of these two points, which can notably lead to the visibilization or the invisibilization of data labour. Finally, the article invites us to reconsider the apparent contradiction between the process of data release and the existence of raw data. Echoing the vocabulary of one of the interviewees, the multiple operations can be seen as a 'rawification' process by which open government data are carefully generated. Such a notion notably helps to build a relational model of what counts as data and what counts as work.

B.S. Chemists: Experience and prospects in a changing scientific and technical environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Russell, T.; Burrelli, J.S.

1995-12-31

The men and women who hold a Bachelor`s degree in chemistry as their highest academic degree are an important for chemistry as their highest academic degree are an important for chemistry and science generally. {open_quotes}BS chemists{close_quotes} are the pool of U.S. residents from which future chemistry Ph.D.s (80 percent of them) and MDs (9 percent of the 1990 medical school class) are recruited and the basic pool of scientific and technical manpower for chemical and related industries. BS chemists are the most heterogeneous of all chemist groups and the most mobile: even at graduation, two-thirds of them intend to bemore » something else -- a Ph.D., MD, MBA, etc. -- in the near future. The mobility of many BS chemists is more to other careers, and hence the diffusion of chemical knowledge throughout the occupational spectrum, is primarily an outflow of BS holders utilizing their scientific training in other fields. This talk describes the past and present circumstances of BS chemists and makes some forecasts about these people about these people and those who will be the graduate of four-year chemistry programs in the future. A number of private and federal agencies collect data on chemists, but to chart the situation of the BS graduate, this paper draws on data sets maintained by the National Science Foundation and the National Research Council, both on BS and, for comparison, Ph.D. holders. For clarity, this analysis will not deal with the situation of MS chemists who, on most indicators fall as intuition would tell us, between the BS and Ph.D. groups. We also draw heavily on ACS Comprehensive Member Surveys and the Starting Salary Surveys of new graduates so identified by their academic departments.« less

Making sense of complex electronic records: socio-technical design in social care.

PubMed

Wastell, David; White, Sue

2014-03-01

Dealing with complex electronic documentation is an integral part of much contemporary professional work. In this paper, we address the design of electronic records for social care professionals in the UK. Recent reforms in UK child welfare have followed a top-down, managerial approach emphasizing conformance to standard processes. The vicissitudes of a major national IT project, the Integrated Children's System, show the limitations of this approach, in particular the detrimental effect it has had on professional autonomy. Following in the foot-steps of Ken Eason, we argue that socio-technical design, by focussing on innovative applications of technology to support users (rather than the interests of the bureaucracy) offers a more promising alternative. A user-centred design exercise is presented to illustrate this approach in action. A novel interface was developed for handling the heterogeneous bundle of documents which make up the social care record, helping social workers make better sense of case-files. The prototype draws on the metaphor of the dining-room table as a way of overcoming the limitations of the computer display. We conclude that socio-technical thinking engenders a shift in mind-set, opening up a radically different design space compared to current design orthodoxy. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The first ICASE/LARC industry roundtable: Session proceedings

NASA Technical Reports Server (NTRS)

Girimaji, Sharath

1995-01-01

The first 'ICASE/LaRC Industry Roundtable' was held on October 3-4, 1994, in Williamsburg, Virginia. The main purpose of the roundtable was to draw attention of ICASE/LaRC scientists to industrial research agendas. The roundtable was attended by about 200 scientists, 30% from NASA Langley; 20% from universities; 17% NASA Langley contractors (including ICASE personnel); and the remainder from federal agencies other than NASA Langley. The technical areas covered reflected the major research programs in ICASE and closely associated NASA branches. About 80% of the speakers were from industry. This report is a compilation of the session summaries prepared by the session chairmen.

Atmospheric entry probes for outer planet exploration. Outer planet entry probe technical summary

NASA Technical Reports Server (NTRS)

1974-01-01

The use of unmanned space probes for investigating the conditions existing on and around the outer planets of the solar system is discussed. The subjects included in the report are: (1) the design of a common entry probe for outer planet missions, (2) the significant trades related to the development of a common probe design, (3) the impact of bus selection on probe design, (4) the impact of probe requirements on bus modifications, and (5) the key technology elements recommended for advanced development. Drawings and illustrations of typical probes are included to show the components and systems used in the space probes.

Shuttle cryogenic supply system optimization study. Volume 3: Technical report, section 10, 11 and 12

NASA Technical Reports Server (NTRS)

1973-01-01

The evaluation of candidate cryogenic fuel systems for space shuttle vehicles is discussed. A set of guidelines was used to establish a matrix of possible combinations for the integration of potential cryogenic systems. The various concepts and combinations which resulted from the integration efforts are described. The parameters which were considered in developing the matrix are: (1) storage of cryogenic materials, (2) fuel lines, (3) tank pressure control, (4) thermal control, (5) fluid control, and (6) fluid conditioning. Block diagrams and drawings of the candidate systems are provided. Performance predictions for the systems are outlined in tables of data.

Minutes of the Explosives Safety Seminar (16th), Held at the Diplomat Hotel, Hollywood, Florida on 24-26 September 1974. Volume 2

DTIC Science & Technology

1974-09-26

concrete structi-e at Battelle Memorial Labs are on hand. b, Photos and drawing of 10’ ID X 31’ steel test chamber 𔃻: Los Alamos . c. Tech data or, AEC... Technical Report, Draft. 3. M0TT, R.l., "A Theory of Fuauentation", Army Operational Research Group Ho., 113-AC-3642, Great Britain, 1943 . 4. GUI , R.W., "he...Kansas AAP, Parsons, KSBURCH, Austin AEC, Los Alamos , NMBURKE, E. F. Olin Corp., St. Marks, FLBURNER, M R. DCASR, N.Y., NYBURNS, N.J3. Dept of

Travel Demand Modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Southworth, Frank; Garrow, Dr. Laurie

This chapter describes the principal types of both passenger and freight demand models in use today, providing a brief history of model development supported by references to a number of popular texts on the subject, and directing the reader to papers covering some of the more recent technical developments in the area. Over the past half century a variety of methods have been used to estimate and forecast travel demands, drawing concepts from economic/utility maximization theory, transportation system optimization and spatial interaction theory, using and often combining solution techniques as varied as Box-Jenkins methods, non-linear multivariate regression, non-linear mathematical programming,more » and agent-based microsimulation.« less

Using mixed methods research designs in health psychology: an illustrated discussion from a pragmatist perspective.

PubMed

Bishop, Felicity L

2015-02-01

To outline some of the challenges of mixed methods research and illustrate how they can be addressed in health psychology research. This study critically reflects on the author's previously published mixed methods research and discusses the philosophical and technical challenges of mixed methods, grounding the discussion in a brief review of methodological literature. Mixed methods research is characterized as having philosophical and technical challenges; the former can be addressed by drawing on pragmatism, the latter by considering formal mixed methods research designs proposed in a number of design typologies. There are important differences among the design typologies which provide diverse examples of designs that health psychologists can adapt for their own mixed methods research. There are also similarities; in particular, many typologies explicitly orient to the technical challenges of deciding on the respective timing of qualitative and quantitative methods and the relative emphasis placed on each method. Characteristics, strengths, and limitations of different sequential and concurrent designs are identified by reviewing five mixed methods projects each conducted for a different purpose. Adapting formal mixed methods designs can help health psychologists address the technical challenges of mixed methods research and identify the approach that best fits the research questions and purpose. This does not obfuscate the need to address philosophical challenges of mixing qualitative and quantitative methods. Statement of contribution What is already known on this subject? Mixed methods research poses philosophical and technical challenges. Pragmatism in a popular approach to the philosophical challenges while diverse typologies of mixed methods designs can help address the technical challenges. Examples of mixed methods research can be hard to locate when component studies from mixed methods projects are published separately. What does this study add? Critical reflections on the author's previously published mixed methods research illustrate how a range of different mixed methods designs can be adapted and applied to address health psychology research questions. The philosophical and technical challenges of mixed methods research should be considered together and in relation to the broader purpose of the research. © 2014 The British Psychological Society.

Beyond good intentions: lessons on equipment donation from an African hospital.

PubMed

Howie, Stephen R C; Hill, Sarah E; Peel, David; Sanneh, Momodou; Njie, Malick; Hill, Philip C; Mulholland, Kim; Adegbola, Richard A

2008-01-01

In 2000, a referral hospital in the Gambia accepted a donation of oxygen concentrators to help maintain oxygen supplies. The concentrators broke down and were put into storage. A case study was done to find the reasons for the problem and to draw lessons to help improve both oxygen supplies and the success of future equipment donations. A technical assessment of the concentrators was carried out by a biomedical engineer with relevant expertise. Semi-structured interviews were undertaken with key informants, and content analysis and inductive approaches were applied to construct the history of the episode and the reasons for the failure. Interviews confirmed the importance of technical problems with the equipment. They also revealed that the donation process was flawed, and that the hospital did not have the expertise to assess or maintain the equipment. Technical assessment showed that all units had the wrong voltage and frequency, leading to overheating and breakdown. Subsequently a hospital donations committee was established to oversee the donations process. On-site biomedical engineering expertise was arranged with a nongovernmental organization (NGO) partner. Appropriate donations of medical equipment, including oxygen concentrators, can be of benefit to hospitals in resource-poor settings, but recipients and donors need to actively manage donations to ensure that the donations are beneficial. Success requires planning, technical expertise and local participation. Partners with relevant skills and resources may also be needed. In 2002, WHO produced guidelines for medical equipment donations, which address problems that might be encountered. These guidelines should be publicized and used.

Beyond good intentions: lessons on equipment donation from an African hospital

PubMed Central

Hill, Sarah E; Peel, David; Sanneh, Momodou; Njie, Malick; Hill, Philip C; Mulholland, Kim; Adegbola, Richard A

2008-01-01

Abstract Objective In 2000, a referral hospital in the Gambia accepted a donation of oxygen concentrators to help maintain oxygen supplies. The concentrators broke down and were put into storage. A case study was done to find the reasons for the problem and to draw lessons to help improve both oxygen supplies and the success of future equipment donations. Methods A technical assessment of the concentrators was carried out by a biomedical engineer with relevant expertise. Semi-structured interviews were undertaken with key informants, and content analysis and inductive approaches were applied to construct the history of the episode and the reasons for the failure. Findings Interviews confirmed the importance of technical problems with the equipment. They also revealed that the donation process was flawed, and that the hospital did not have the expertise to assess or maintain the equipment. Technical assessment showed that all units had the wrong voltage and frequency, leading to overheating and breakdown. Subsequently a hospital donations committee was established to oversee the donations process. On-site biomedical engineering expertise was arranged with a nongovernmental organization (NGO) partner. Conclusion Appropriate donations of medical equipment, including oxygen concentrators, can be of benefit to hospitals in resource-poor settings, but recipients and donors need to actively manage donations to ensure that the donations are beneficial. Success requires planning, technical expertise and local participation. Partners with relevant skills and resources may also be needed. In 2002, WHO produced guidelines for medical equipment donations, which address problems that might be encountered. These guidelines should be publicized and used. PMID:18235890

Standardisation in the field of nanotechnology: some issues of legitimacy.

PubMed

Forsberg, Ellen-Marie

2012-12-01

Nanotechnology will allegedly have a revolutionary impact in a wide range of fields, but has also created novel concerns about health, safety and the environment (HSE). Nanotechnology regulation has nevertheless lagged behind nanotechnology development. In 2004 the International Organization for Standardization established a technical committee for producing nanotechnology standards for terminology, measurements, HSE issues and product specifications. These standards are meant to play a role in nanotechnology development, as well as in national and international nanotechnology regulation, and will therefore have consequences for consumers, workers and the environment. This paper gives an overview of the work in the technical committee on nanotechnology and discusses some challenges with regard to legitimacy in such work. The paper focuses particularly on stakeholder involvement and the potential problems of scientific robustness when standardising in such early stages of the scientific development. The intention of the paper is to raise some important issues rather than to draw strong conclusions. However, the paper will be concluded with some suggestions for improving legitimacy in the TC 229 and a call for increased public awareness about standardisation in the field of nanotechnology.

A Job Classification Scheme for Health Manpower

PubMed Central

Weiss, Jeffrey H.

1968-01-01

The Census Bureau's occupational classification scheme and concept of the “health services industry” are inadequate tools for analysis of the changing job structure of health manpower. In an attempt to remedy their inadequacies, a new analytical framework—drawing upon the work of James Scoville on the job content of the U.S. economy—was devised. The first stage in formulating this new framework was to determine which jobs should be considered health jobs. The overall health care job family was designed to encompass jobs in which the primary technical focus or function is oriented toward the provision of health services. There are two dimensions to the job classification scheme presented here. The first describes each job in terms of job content; relative income data and minimum education and training requirements were employed as surrogate measures. By this means, health care jobs were grouped by three levels of job content: high, medium, and low. The other dimension describes each job in terms of its technical focus or function; by this means, health care jobs were grouped into nine job families. PMID:5673666

Agricultural illustrations of 19th century Korea: 'Imwon gyeongjeji' (Treatises on Management of Forest and Garden) by Seo Yugu.

PubMed

Chung, Hyung-Min

2011-01-01

The generative relationship between text and image has long been established. Its structure evolved historically as a result of varying understandings of the functions of art and technology. Agriculture illustration, which emerged in China during the Song dynasty, is a prime example of this creative dialogue in which aspects of both disciplines were combined. Political, technological, and aesthetic concerns informed the reformulations of this new genre. This paper will address agricultural illustrations on nineteenth-century Korea, when notable changes occurred in the visualization of agricultural texts. It will explore changes in the understanding of the roles of agriculture, technology, and labor through an analysis of shifts in modes of illustration and the texts selected. The relationship between technology and visual representations during late Joseon Korea will be contextualized through an exploration of the evolution of technical drawing in East Asia. This paper will suggest that the recognition of imagery's ability to convey textual and technical information provided an important alternative paradigm for the presentation and use of knowledge.

PREVENT: a program of the National Training Initiative on Injury and Violence Prevention.

PubMed

Runyan, Carol W; Gunther-Mohr, Carol; Orton, Stephen; Umble, Karl; Martin, Sandra L; Coyne-Beasley, Tamera

2005-12-01

Training practitioners to use evidence-based approaches to the primary prevention of violence is challenging as a result of the dearth of well-evaluated intervention programs and the lack of familiarity of some practitioners in drawing critically on existing literature. An element of the National Training Initiative in Injury and Violence Prevention, the PREVENT (Preventing Violence Through Education, Networking, and Technical Assistance) program began in late 2003 to train practitioners to address multiple types of violence by encouraging more widespread use of evidence-based approaches to primary prevention. It is intended to reach practitioners involved in addressing violence against women, sexual violence, child maltreatment, youth violence, and suicide in varied community settings. The program uses a combination of varied types of face-to-face training and distance learning coupled with opportunities for networking and technical assistance. Ultimately the program intends to stimulate and facilitate changes in individual, organizational, and cultural awareness and practices fostering primary prevention of violence. The project employs formative, process, and impact evaluation techniques aimed at improving delivery of the training as well as tracking changes in individual and organizations.

Ethical questions must be considered for electronic health records.

PubMed

Spriggs, Merle; Arnold, Michael V; Pearce, Christopher M; Fry, Craig

2012-09-01

National electronic health record initiatives are in progress in many countries around the world but the debate about the ethical issues and how they are to be addressed remains overshadowed by other issues. The discourse to which all others are answerable is a technical discourse, even where matters of privacy and consent are concerned. Yet a focus on technical issues and a failure to think about ethics are cited as factors in the failure of the UK health record system. In this paper, while the prime concern is the Australian Personally Controlled Electronic Health Record (PCEHR), the discussion is relevant to and informed by the international context. The authors draw attention to ethical and conceptual issues that have implications for the success or failure of electronic health records systems. Important ethical issues to consider as Australia moves towards a PCEHR system include: issues of equity that arise in the context of personal control, who benefits and who should pay, what are the legitimate uses of PCEHRs, and how we should implement privacy. The authors identify specific questions that need addressing.

Technical report analysis and design: Study of solid rocket motors for a space shuttle booster, volume 2, book 1, supplement 1

NASA Technical Reports Server (NTRS)

1972-01-01

An analysis and design effort was conducted as part of the study of solid rocket motor for a space shuttle booster. The 156-inch-diameter, parallel burn solid rocket motor was selected as its baseline because it is transportable and is the most cost-effective, reliable system that has been developed and demonstrated. The basic approach was to concentrate on the selected baseline design, and to draw from the baseline sufficient data to describe the alternate approaches also studied. The following conclusions were reached with respect to technical feasibility of the use of solid rocket booster motors for the space shuttle vehicle: (1) The 156-inch, parallel-burn baseline SRM design meets NASA's study requirements while incorporating conservative safety factors. (2) The solid rocket motor booster represents a cost-effective approach. (3) Baseline costs are conservative and are based on a demonstrated design. (4) Recovery and reuse are feasible and offer substantial cost savings. (5) Abort can be accomplished successfully. (6) Ecological effects are acceptable.

Systematized contact between inventors and industry. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-07-31

A total of 139 inventions by private (individual) inventors were submitted to Technology Targeting Incorporated. Each inventor was told of the nature of the DOE-supported Project, through informational and promotional efforts by TTI, and each completed an Invention Submittal Form developed by TTI to describe the essential nature of the claimed invention. Many also submitted detailed descriptions, drawings, technical reports and similar supplemental materials giving a more comprehensive view of their inventions. Each invention was reviewed for technical and commercial merit, as well as for appropriateness of marketing through the Technology Targeting DataBase{trademark} (hereafter ``DATABASE). Overall, participating inventors were enthusiasticmore » about the Project and felt participation in it was rewording. Even when not selected for marketing, inventors were given an analysis of their inventions which could help them enhance the inventions and improve marketing efforts. Inventors whose inventions were selected for marketing were shown how to professionally market the inventions, including the format for Non Confidential Invention Summaries, the preferred form for Confidential Disclosure Agreements, targeting of business decision-makers responsible for technology evaluation, and the like; some of these inventors are still interacting with industrial contacts provided by TTI through this Project. All inventors received copies of patent abstracts uncovered in the prior art searches for their inventions and a copy of TTI`s booklet, Patent Law Basics for Individual Inventors.« less

Systematized contact between inventors and industry. [Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-07-31

A total of 139 inventions by private (individual) inventors were submitted to Technology Targeting Incorporated. Each inventor was told of the nature of the DOE-supported Project, through informational and promotional efforts by TTI, and each completed an Invention Submittal Form developed by TTI to describe the essential nature of the claimed invention. Many also submitted detailed descriptions, drawings, technical reports and similar supplemental materials giving a more comprehensive view of their inventions. Each invention was reviewed for technical and commercial merit, as well as for appropriateness of marketing through the Technology Targeting DataBase[trademark] (hereafter DATABASE). Overall, participating inventors were enthusiasticmore » about the Project and felt participation in it was rewording. Even when not selected for marketing, inventors were given an analysis of their inventions which could help them enhance the inventions and improve marketing efforts. Inventors whose inventions were selected for marketing were shown how to professionally market the inventions, including the format for Non Confidential Invention Summaries, the preferred form for Confidential Disclosure Agreements, targeting of business decision-makers responsible for technology evaluation, and the like; some of these inventors are still interacting with industrial contacts provided by TTI through this Project. All inventors received copies of patent abstracts uncovered in the prior art searches for their inventions and a copy of TTI's booklet, Patent Law Basics for Individual Inventors.« less

Negotiations of distress between East Timorese and Vietnamese refugees and their family doctors in Melbourne.

PubMed

Kokanovic, Renata; May, Carl; Dowrick, Christopher; Furler, John; Newton, Danielle; Gunn, Jane

2010-05-01

Recent critiques of depression have contested its coherence as a concept and highlighted its performance in medicalising distress. Studies of depression in a cross-cultural context have focused on language and belief systems as technical barriers to practice that need to be overcome in enacting depression work. This paper seeks to locate culture within the broader socio-structural context of depression care in general practice. The paper draws on interviews with five general practitioners (GPs), and 24 patients from Vietnamese and East Timorese backgrounds who predominantly have left their home as refugees. Each had been diagnosed with depression or prescribed antidepressants. These patients gave accounts of distress deeply embedded within, and inseparable from, lives fraught with frightening pre-migration experiences, traumatic escape and profound dislocation and alienation in their new 'home'. Fragmented lives were contrasted with the nourishing social fabric of homes left behind. GP participants were involved in a process of engaging with a profoundly communal and structural account of emotional distress while defending and drawing on an individualised notion of depression in performing their work and accounting for the pain presented to them.

Introduction to economic assessment - part 2.

PubMed

McMahon, Ann; Sin, Chih Hoong

2014-07-01

This is the second in a series of four continuing professional development articles that explain some of the principles of economic assessment (EA) and describe how they may be applied in practice by front line practitioners leading service innovations. It introduces a methodology, with associated tools and templates, that has been used by practising nurses to conduct EAs. Our purpose is to equip readers with the knowledge to develop a technically competent, pragmatic EA that will contribute towards evidence-informed decision making and assure the best use of limited resources. If you have not already read the first article in this series ( McMahon and Sin 2013), we strongly advise you to do so as each article purposefully draws and builds on those that have gone before. The time out exercises in the first article required you to access source material located on the RCN website and identify a service innovation in your workplace. The time out exercises in this article draw in these same sources. We begin this article by recapping on the points covered in the first article before exploring the implications of the principles of EA and how to apply them in practice. In this article, we refer to and draw on a companion article published in this edition of Nursing Management ( pages 38-41) that sets out the most commonly cited approaches to EA in health and social care. We aim to enable readers, along with those they seek to influence, to make an informed decision as to what may be an appropriate EA approach in any specific context.

Advanced oil recovery technologies for improved recovery from slope basin clastic reservoirs, Nash Draw Brushy Canyon Pool, Eddy County, NM. Second annual technical progress report, October 1, 1996--September 30, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-09-01

The Nash Draw Brushy Canyon Pool in Eddy County, New Mexico is a field demonstration in the US Department of Energy Class III Program. Advanced reservoir characterization techniques are being used at the Nash Draw project to develop reservoir management strategies for optimizing oil recovery from this Delaware reservoir. Analysis, interpretation, and integration of recently acquired geological, geophysical, and engineering data revealed that the initial reservoir description was too simplistic to capture the critical features of this complex formation. As a result of the analysis, a proposed pilot area was reconsidered. Comparison of seismic data and engineering data have shownmore » evidence of discontinuities in the area surrounding the proposed injector. Analysis of the 3-D seismic has shown that wells in the proposed pilot are in an area of poor quality amplitude development. The implication is that since amplitude attenuation is a function of porosity, then this is not the best area to be attempting a pilot pressure maintenance project. Because the original pilot area appears to be compartmentalized, the lateral continuity between the pilot wells could be reduced. The 3-D seismic interpretation indicates other areas may be better suited for the initial pilot area. Therefore, the current focus has shifted more to targeted drilling, and the pilot injection will be considered in a more continuous area of the NDP in the future. Results of reservoir simulation studies indicate that pressure maintenance should be started early when reservoir pressure is still high.« less

The preparation of illustrations for reports of the United States Geological survey : with brief descriptions of processes of reproduction

USGS Publications Warehouse

Ridgway, John L.

1920-01-01

There has been an obvious need in the Geological Survey o£ a paper devoted wholly to illustrations. No complete paper on the character, use, and mode of preparation of illustration has been published by the Survey, though brief suggestions concerning certain features of their use have been printed in connection wit other suggestions pertaining to publications. The present paper includes matter which it is hoped will be of service to authors in their work of making up original drafts of illustrations and to drafsmen who are using these originals in preparing more finished drawing but it is not a technical treatise on drafting.

Advances in spaceborne synthetic aperture radar sensor technology

NASA Technical Reports Server (NTRS)

Caro, E. R.; Ruzek, M.

1986-01-01

The evolution of space SARs for NASA projects since Seasat (1978) is surveyed, with an emphasis on hardware development. The fundamental principles of SAR are reviewed; the SIR-A and SIR-B instruments flown as Shuttle payloads are characterized; their antennas, transmitters, receivers, and data subsystems are described; the advantages offered by the SIR-C dual-frequency (L and C band) dual-polarization distributed SAR (being developed for a future Shuttle flight and as the basis of an SAR for the Earth Observing System) are explained; and a number of technical challenges are identified (including RF elements, structural fidelity, pointing accuracy, data handling, and dc power). Drawings, diagrams, sample images, photographs, and tables are provided.

Saguaro Power Plant Solar Repowering Project. Volume II. System requirements specification. Final technical report, September 1979-July 1980

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, E.R.

1980-07-01

This specification defines the system and subsystem characteristics, design requirements, and system environmental requirements for the Saguaro Power Plant Solar Repowering Project. This project involves the solar repowering of all (120.2 MWe gross) of the 115 MWe net power No. One steam-Rankine unit of the Arizona Public Service Company's Saguaro station. The receiver heat transport fluid is draw salt (60% sodium nitrate and 40% potassium nitrate) that is also used to provide 3.8 hours of sensible heat thermal energy storage. The quad-cavity type receiver is mounted on a tower within a single surrounding collector field of 10,500 second generation heliostats.

Fault Analysis on Bevel Gear Teeth Surface Damage of Aeroengine

NASA Astrophysics Data System (ADS)

Cheng, Li; Chen, Lishun; Li, Silu; Liang, Tao

2017-12-01

Aiming at the trouble phenomenon for bevel gear teeth surface damage of Aero-engine, Fault Tree of bevel gear teeth surface damage was drawing by logical relations, the possible cause of trouble was analyzed, scanning electron-microscope, energy spectrum analysis, Metallographic examination, hardness measurement and other analysis means were adopted to investigate the spall gear tooth. The results showed that Material composition, Metallographic structure, Micro-hardness, Carburization depth of the fault bevel gear accord with technical requirements. Contact fatigue spall defect caused bevel gear teeth surface damage. The small magnitude of Interference of accessory gearbox install hole and driving bevel gear bearing seat was mainly caused. Improved measures were proposed, after proof, Thermoelement measures are effective.

Thinking and meddling with boundaries: Critical reflections on Matthew Weinstein's narrative of street medics, red-zones and glop

NASA Astrophysics Data System (ADS)

Alsop, Steve

2015-03-01

In pursuit of more mindful notions of hybridity, this review essay provides a series of reflections on Mathew Weinstein's representations of Street Medics and `sciences for the red zones of neoliberalism'. My analysis draws on three popular ways of thinking with boundaries to offer a critical reading of the boundary-work that the essay performs with respect to three dialectics: (1) technical and political; (2) disciplinarily and multidisciplinarities; and (3) structures and agencies. I conclude with reflections on my boundary labour as a researcher, writer and pedagogue and how such cultural work might learn to live better with difference, ambiguities, hybrids and cross-hybrid learning.

State-Targeted Funding and Technical Assistance to Increase Access to Medication Treatment for Opioid Use Disorder.

PubMed

Abraham, Amanda J; Andrews, Christina M; Grogan, Colleen M; Pollack, Harold A; D'Aunno, Thomas; Humphreys, Keith; Friedmann, Peter D

2018-04-01

As the United States grapples with an opioid epidemic, expanding access to effective treatment for opioid use disorder is a major public health priority. Identifying effective policy tools that can be used to expand access to care is critically important. This article examines the relationship between state-targeted funding and technical assistance and adoption of three medications for treating opioid use disorder: oral naltrexone, injectable naltrexone, and buprenorphine. This study draws from the 2013-2014 wave of the National Drug Abuse Treatment System Survey, a nationally representative, longitudinal study of substance use disorder treatment programs. The sample includes data from 695 treatment programs (85.5% response rate) and representatives from single-state agencies in 49 states and Washington, D.C. (98% response rate). Logistic regression was used to examine the relationships of single-state agency targeted funding and technical assistance to availability of opioid use disorder medications among treatment programs. State-targeted funding was associated with increased program-level adoption of oral naltrexone (adjusted odds ratio [AOR]=3.14, 95% confidence interval [CI]=1.49-6.60, p=.004) and buprenorphine (AOR=2.47, 95% CI=1.31-4.67, p=.006). Buprenorphine adoption was also correlated with state technical assistance to support medication provision (AOR=1.18, 95% CI=1.00-1.39, p=.049). State-targeted funding for medications may be a viable policy lever for increasing access to opioid use disorder medications. Given the historically low rates of opioid use disorder medication adoption in treatment programs, single-state agency targeted funding is a potentially important tool to reduce mortality and morbidity associated with opioid disorders and misuse.

Sustainable Biofuels A Transitions Approach to Understanding the Global Expansion of Ethanol and Biodiesel

NASA Astrophysics Data System (ADS)

Cottes, Jeffrey Jacob

Between 1998 and 2008, the promise of biofuels to increase rural development, enhance energy security, and reduce greenhouse gas emissions stimulated their diffusion across international markets. This rapid expansion of ethanol and biodiesel encouraged many jurisdictions to implement biofuels expansion policies and programs. Global biofuels, characterised by mass production and international trade of ethanol and biodiesel, occurred despite their long history as marginal technologies on the fringe of the petroleum-based transportation energy regime. The first purpose of this dissertation is to examine the global expansion of ethanol and biodiesel to understand how these recurrent socio-technological failures co-evolved with petroleum transportation fuels. Drawing from the field of socio-technical transitions, this dissertation also assesses the global expansion of ethanol and biodiesel to determine whether or not these first generation biofuels are sustainable. Numerous studies have assessed the technical effects of ethanol and biodiesel, but effects-based technical assessments of transport biofuels are unable to explain the interaction of wider system elements. The configuration of multi-level factors (i.e., niche development, the technological regime, and the socio-technical landscape) informs the present and emerging social functions of biofuels, which become relevant when determining how biofuels might become a sustainable energy option. The biofuels regimes that evolved in Brazil, the United States, and the European Union provide case studies show how ethanol and biodiesel expanded from fringe fuels to global commodities. The production infrastructures within these dominant biofuels regimes contribute to a persistence of unsustainable first generation biofuels that can inhibit the technical development and sustainability of biofuels. However, new and emerging ethanol and biodiesel markets are relatively small in comparison to the dominant regimes, and can readily adapt to technical and regulatory change. This dissertation argues that dominant biofuels regimes have not produced a sustainable energy option. It explores the Canadian case to evaluate the opportunities for niche development, and suggests that small markets can develop niche innovations by regulating the insertion of sustainability criteria in order to de-align the dominant trajectory of global biofuels production regimes and encourage their re-alignment in a more sustainable configuration.

Meeting the challenges of installing a mobile robotic system

NASA Technical Reports Server (NTRS)

Decorte, Celeste

1994-01-01

The challenges of integrating a mobile robotic system into an application environment are many. Most problems inherent to installing the mobile robotic system fall into one of three categories: (1) the physical environment - location(s) where, and conditions under which, the mobile robotic system will work; (2) the technological environment - external equipment with which the mobile robotic system will interact; and (3) the human environment - personnel who will operate and interact with the mobile robotic system. The successful integration of a mobile robotic system into these three types of application environment requires more than a good pair of pliers. The tools for this job include: careful planning, accurate measurement data (as-built drawings), complete technical data of systems to be interfaced, sufficient time and attention of key personnel for training on how to operate and program the robot, on-site access during installation, and a thorough understanding and appreciation - by all concerned - of the mobile robotic system's role in the security mission at the site, as well as the machine's capabilities and limitations. Patience, luck, and a sense of humor are also useful tools to keep handy during a mobile robotic system installation. This paper will discuss some specific examples of problems in each of three categories, and explore approaches to solving these problems. The discussion will draw from the author's experience with on-site installations of mobile robotic systems in various applications. Most of the information discussed in this paper has come directly from knowledge learned during installations of Cybermotion's SR2 security robots. A large part of the discussion will apply to any vehicle with a drive system, collision avoidance, and navigation sensors, which is, of course, what makes a vehicle autonomous. And it is with these sensors and a drive system that the installer must become familiar in order to foresee potential trouble areas in the physical, technical, and human environment.

An eye movement pre-training fosters the comprehension of processes and functions in technical systems.

PubMed

Skuballa, Irene T; Fortunski, Caroline; Renkl, Alexander

2015-01-01

The main research goal of the present study was to investigate in how far pre-training eye movements can facilitate knowledge acquisition in multimedia (pre-training principle). We combined considerations from research on eye movement modeling and pre-training to design and test a non-verbal eye movement-based pre-training. Participants in the experimental condition watched an animated circle moving in close spatial resemblance to a static visualization of a solar plant accompanied by a narration in a subsequently presented learning environment. This training was expected to foster top-down processes as reflected in gaze behavior during the learning process and enhance knowledge acquisition. We compared two groups (N = 45): participants in the experimental condition received pre-training in a first step and processed the learning material in a second step, whereas the control group underwent the second step without any pre-training. The pre-training group outperformed the control group in their learning outcomes, particularly in knowledge about processes and functions of the solar plant. However, the superior learning outcomes in the pre-training group could not be explained by eye-movement patterns. Furthermore, the pre-training moderated the relationship between experienced stress and learning outcomes. In the control group, high stress levels hindered learning, which was not found for the pre-training group. On a delayed posttest participants were requested to draw a picture of the learning content. Despite a non-significant effect of training on the quality of drawings, the pre-training showed associations between learning outcomes at the first testing time and process-related aspects in the quality of their drawings. Overall, non-verbal pre-training is a successful instructional intervention to promote learning processes in novices although these processes did not directly reflect in learners' eye movement behavior during learning.

Lightning Protection and Structural Bonding for the B2 Test Stand

NASA Technical Reports Server (NTRS)

Kinard, Brandon

2015-01-01

With the privatization of the space industry, NASA has entered a new era. To explore deeper parts of the solar system, NASA is developing a new spacecraft, the Space Launch System (SLS), capable of reaching these destinations, such as an asteroid or Mars. However, the test stand that is capable of testing the stage has been unused for many years. In addition to the updating/repair of the stand, more steel is being added to fully support the SLS. With all these modifications, the lightning protection system must be brought up to code to assure the protection of all personnel and assets. Structural bonding is a part of the lightning protection system. The focus of this project was to assure proper structural bonding. To begin, all relevant technical standards and the construction specifications were reviewed. This included both the specifications for the lightning protection and for general construction. The drawings were reviewed as well. From the drawings, bolted structural joints were reviewed to determine whether bonding was necessary. Several bolted joints were determined to need bonding according to the notes in the drawings. This exceeds the industry standards. The bolted joints are an electrically continuous joint. During tests, the stand experiences heavy vibration that may weaken the continuity of the bolted joint. Therefore, the secondary bonding is implemented to ensure that the structural joint has low resistance. If the structural joint has a high resistance because of corrosion, a potential gradient can occur that can cause a side flash. Damage, injury, or death can occur from a side flash so they are to be prevented. A list of the identified structural joints was compiled and sent to the contractor to be bonded. That covers the scope of this project.

Tracing Staphylococcus aureus in small and medium-sized food-processing factories on the basis of molecular sub-species typing.

PubMed

Koreňová, Janka; Rešková, Zuzana; Véghová, Adriana; Kuchta, Tomáš

2015-01-01

Contamination by Staphylococcus aureus of the production environment of three small or medium-sized food-processing factories in Slovakia was investigated on the basis of sub-species molecular identification by multiple locus variable number of tandem repeats analysis (MLVA). On the basis of MLVA profiling, bacterial isolates were assigned to 31 groups. Data from repeated samplings over a period of 3 years facilitated to draw spatial and temporal maps of the contamination routes for individual factories, as well as identification of potential persistent strains. Information obtained by MLVA typing allowed to identify sources and routes of contamination and, subsequently, will allow to optimize the technical and sanitation measures to ensure hygiene.

Survey of Industrial, Agricultural, and Medical Applications of Radiometric Gauging and Process Control

PubMed Central

Hubbell, J. H.

1990-01-01

Photon and particle radiations (gamma rays, x rays, brems-strahlung, electrons and other charged particles, and neutrons) from radioactive isotopes, x-ray tubes, and accelerators are now widely used in gauging, production control, and other monitoring and metrology devices where avoidance of mechanical contact is desirable. The general principles of radiation gauges, which rely on detection of radiation transmitted by the sample, or on detection of scattered or other secondary radiations produced in the sample, are discussed. Examples of such devices currently used or at least shown to be feasible in industrial, transportation, building, mining, agricultural, medical, and other metrology situations are presented, drawing from a total of 146 selected technical and review paper reference sources here cited. PMID:28179800

Search For Effects of an Electrostatic Potential on Clocks in the Frame of Reference of a Charged Particle

NASA Technical Reports Server (NTRS)

Ringermacher, Harry I.; Conradi, Mark S.; Cassenti, Brice N.; Millis, Marc G. (Technical Monitor)

2001-01-01

The Program Planning meeting was held on Jan 27-28 at the Washington University, Dept. of Physics. Experiment strategies and details were discussed and milestones mapped. Dr. Ringermacher, the program technical leader and Co-Principal Investigator, presented a Physics Department seminar on the theory and experiment in progress. Following the meeting Professor Conradi (CO-PI) and his students designed the NMR probe and electronics required for the experiment and submitted the drawings to the shop for fabrication. Dr. Cassenti, at UTRC, initiated analytic and computer analysis of the experimental conditions in order to anticipate possible classical effects. Dr. Ringermacher, at KRONOTRAN, re-evaluated the experiment interpretation from the theory and continued working to secure its underpinnings.

Motion Simulation Analysis of Rail Weld CNC Fine Milling Machine

NASA Astrophysics Data System (ADS)

Mao, Huajie; Shu, Min; Li, Chao; Zhang, Baojun

CNC fine milling machine is a new advanced equipment of rail weld precision machining with high precision, high efficiency, low environmental pollution and other technical advantages. The motion performance of this machine directly affects its machining accuracy and stability, which makes it an important consideration for its design. Based on the design drawings, this article completed 3D modeling of 60mm/kg rail weld CNC fine milling machine by using Solidworks. After that, the geometry was imported into Adams to finish the motion simulation analysis. The displacement, velocity, angular velocity and some other kinematical parameters curves of the main components were obtained in the post-processing and these are the scientific basis for the design and development for this machine.

CHRONICLE: Third International Symposium on Modern Optics, Budapest, September 1988

NASA Astrophysics Data System (ADS)

Bukhenskiĭ, M. F.; Nikitin, P. I.; Semenov, A. S.

1989-07-01

The Third International Symposium on Modern Optics (Optics-88), held in Budapest on 13-16 September 1988, was organized by the Hungarian Optical, Acoustic, and Cinematographic Society with the support of the International Commission on Optics and various scientific and industrial organizations in Hungary. The International Symposium Committee was composed of leading specialists from 11 countries in Asia, America, and Europe with A. M. Prokhorov (USSR) and N. Kroo (Hungary) as Co-chairmen. The purpose of this regular symposium is to summarize the scientific and technical progress underlying the developments in optics itself, discuss the branches of science where progress depends on optical methods in devices, and draw the attention of specialists to the most promising trends which should yield results in the immediate future.

Sex assessment from the acetabular rim by means of image analysis.

PubMed

Benazzi, S; Maestri, C; Parisini, S; Vecchi, F; Gruppioni, G

2008-08-25

Determining sex from skeletal remains is one of the most important steps in archaeological and forensic anthropology. The present study considers the diagnostic value of the acetabulum based on its planar image and related metric data. For this purpose, 83 adult os coxae of known age were examined. Digital photos of the acetabular area were taken, with each bone in a standardized orientation. Technical drawing software was used to trace the acetabular rim and to measure the related dimensions (area, perimeter, longitudinal and transverse maximum width). The measurements were subjected to SPSS discriminant and classification function analysis. There were significant differences (p

Design and technical support for development of a molded fabric space suit joint

NASA Technical Reports Server (NTRS)

Olson, L. Howard

1994-01-01

NASA Ames Research Center has under design a new joint or element for use in a space suit. The design concept involves molding a fabric to a geometry developed at Ames. Unusual characteristics of this design include the need to produce a fabric molding draw ratio on the order of thirty percent circumferentially on the surface. Previous work done at NASA on molded fabric joints has shown that standard, NASA qualified polyester fabrics as are currently available in the textile industry for use in suits have a maximum of about fifteen percent draw ratio. NASA has done the fundamental design for a prototype joint and of a mold which would impart the correct shape to the fabric support layer of the joint. NASA also has the capability to test a finished product for suitability and reliability. Responsibilities resting with Georgia Tech in the design effort for this project are textile related, namely fiber selection, fabric design to achieve the properties of the objective design, and determining production means and sources for the fabrics. The project goals are to produce a prototype joint using the NASA design for evaluation of effectiveness by NASA, and to establish the sources and specifications which would allow reliable and repeatable production of the joint.

Re-energizing energy supply: Electrolytically-produced hydrogen as a flexible energy storage medium and fuel for road transport

NASA Astrophysics Data System (ADS)

Emonts, Bernd; Schiebahn, Sebastian; Görner, Klaus; Lindenberger, Dietmar; Markewitz, Peter; Merten, Frank; Stolten, Detlef

2017-02-01

"Energiewende", which roughly translates as the transformation of the German energy sector in accordance with the imperatives of climate change, may soon become a byword for the corresponding processes most other developed countries are at various stages of undergoing. Germany's notable progress in this area offers valuable insights that other states can draw on in implementing their own transitions. The German state of North Rhine-Westphalia (NRW) is making its own contribution to achieving the Energiewende's ambitious objectives: in addition to funding an array of 'clean and green' projects, the Virtual Institute Power to Gas and Heat was established as a consortium of seven scientific and technical organizations whose aim is to inscribe a future, renewable-based German energy system with adequate flexibility. Thus, it is tasked with conceiving of and evaluating suitable energy path options. This paper outlines one of the most promising of these pathways, which is predicated on the use of electrolytically-produced hydrogen as an energy storage medium, as well as the replacement of hydrocarbon-based fuel for most road vehicles. We describe and evaluate this path and place it in a systemic context, outlining a case study from which other countries and federated jurisdictions therein may draw inspiration.

Balancing flexibility for the employer and the employee: a case study of the development of annualized hours employment contracts.

PubMed

Tucker, P; Gaertner, J; Mason, C

2001-12-01

As with many forms of flexible working, Annualized Hours (AH) systems offer potential benefits to both the employer and the employee. However, the flexibility requirements of employers and employees often conflict. Therefore, when a large food manufacturing organization decided to redesign its AH system, it employed an independent consultancy to act as neutral third party. The consultancy provided technical expertise and assistance in developing an AH system that optimised productivity and was acceptable to the workforce. Data are presented, obtained from focus groups conducted throughout the organization, describing some of the potential difficulties of implementing an AH system. Drawing upon these data, a number of new AH systems were proposed and modelled using specialist software tools. The design process is described, together with the advantages and difficulties associated with use of the software tools. It is concluded that the key elements in the process of designing AH systems are centred around issues of trust and communication; the involvement of a broad range of interested parties, through a process of carefully managed group facilitation; and the need for adequate technical support in the development and evaluation of AH systems.

A new semiquantitative method for evaluation of metastasis progression.

PubMed

Volarevic, A; Ljujic, B; Volarevic, V; Milovanovic, M; Kanjevac, T; Lukic, A; Arsenijevic, N

2012-01-01

Although recent technical advancements are directed toward developing novel assays and methods for detection of micro and macro metastasis, there are still no reports of reliable, simple to use imaging software that could be used for the detection and quantification of metastasis in tissue sections. We herein report a new semiquantitative method for evaluation of metastasis progression in a well established 4T1 orthotopic mouse model of breast cancer metastasis. The new semiquantitative method presented here was implemented by using the Autodesk AutoCAD 2012 program, a computer-aided design program used primarily for preparing technical drawings in 2 dimensions. By using the Autodesk AutoCAD 2012 software- aided graphical evaluation we managed to detect each metastatic lesion and we precisely calculated the average percentage of lung and liver tissue parenchyma with metastasis in 4T1 tumor-bearing mice. The data were highly specific and relevant to descriptive histological analysis, confirming reliability and accuracy of the AutoCAD 2012 software as new method for quantification of metastatic lesions. The new semiquantitative method using AutoCAD 2012 software provides a novel approach for the estimation of metastatic progression in histological tissue sections.

Gas turbine engines and transmissions for bus demonstration programs. Technical status report, 30 April 1979-31 July 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigro, D.N.

1979-07-01

The quarterly status report covers the period from 30 April 1979 through 31 July 1979 and is a summary of DDA activities for the effort performed on the procurement and delivery of eleven (11) Allison GT 404-4 gas turbine engines and five (5) HT740CT and six (6) V730CT Allison automatic transmissions and the required associated software. The contract requires the delivery of eleven (11) Allison GT 404-4 Industrial Gas Turbine Engines and five (5) HT740CT and six (6) V730CT Allison Automatic Transmissions for the Greyhound and Transit Coaches, respectively. In addition, software items such as cost reports, technical reports, installationmore » drawings, acceptance test data and parts lists are required. A recent decision by the DOE will modify the build configuration for the last four (4) Transit Coach engines. It was decided by the DOE at a meeting in Washington, DC on March 28, 1979 with representatives from DDA, NASA/LeRC, JPL and Booz-Allen and Hamilton that these engines will be built with ceramic regenerators. (TFD)« less

A taxonomy of accountable care organizations for policy and practice.

PubMed

Shortell, Stephen M; Wu, Frances M; Lewis, Valerie A; Colla, Carrie H; Fisher, Elliott S

2014-12-01

To develop an exploratory taxonomy of Accountable Care Organizations (ACOs) to describe and understand early ACO development and to provide a basis for technical assistance and future evaluation of performance. Data from the National Survey of Accountable Care Organizations, fielded between October 2012 and May 2013, of 173 Medicare, Medicaid, and commercial payer ACOs. Drawing on resource dependence and institutional theory, we develop measures of eight attributes of ACOs such as size, scope of services offered, and the use of performance accountability mechanisms. Data are analyzed using a two-step cluster analysis approach that accounts for both continuous and categorical data. We identified a reliable and internally valid three-cluster solution: larger, integrated systems that offer a broad scope of services and frequently include one or more postacute facilities; smaller, physician-led practices, centered in primary care, and that possess a relatively high degree of physician performance management; and moderately sized, joint hospital-physician and coalition-led groups that offer a moderately broad scope of services with some involvement of postacute facilities. ACOs can be characterized into three distinct clusters. The taxonomy provides a framework for assessing performance, for targeting technical assistance, and for diagnosing potential antitrust violations. © Health Research and Educational Trust.

District heating and cooling systems for communities through power plant retrofit distribution network. Volume 3. Final report, September 1, 1978-May 31, 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This final report of Phase I of the study presents Task 4, Technical Review and Assessment. The most-promising district-heating concept identified in the Phase I study for the Public Service Electric and Gas Company, Newark, New Jersey, is a hot-water system in which steam is extracted from an existing turbine and used to drive a new, small backpressure turbine-generator. The backpressure turbine provides heat for district heating and simultaneously provides additional electric-generating capacity to partially offset the capacity lost due to the steam extraction. This approach is the most-economical way to retrofit the stations studied for district heating while minimizingmore » electric-capacity loss. Nine fossil-fuel-fired stations within the PSE and G system were evaluated for possibly supplying heat for district heating and cooling in cogeneration operations, but only three were selected to supply the district-heating steam. They are Essex, Hudson, and Bergen. Plant retrofit, thermal distribution schemes, consumer-conversion scheme, and consumer-metering system are discussed. Extensive technical information is provided in 16 appendices, additional tables, figures, and drawings. (MCW)« less

[Using an employee survey as a means of quality assurance in newborn hearing screening].

PubMed

Depenbrock, A; Matulat, P; am Zehnhoff-Dinnesen, A

2013-03-01

Studies drawing information not only from technical data but also from surveying human resources behind the universal newborn hearing screening (UNHS) appear to be a rarity. This study aims at showing how the state of both knowledge and practical skills among the screening staff are essential aspects in future quality management. A self-developed questionnaire was sent to hospital staff addressing a total of 710 nurses who were registered as having undertaken a UNHS training course. Questions were aimed at aspects of organization, personal practical skills, current problems and improvement possibilities. High rates of occupancy, lack of trained personnel, technical issues and background noise disturbances were considered to be factors that increased time pressure and slowed down procedures. Of the participants 16 % considered communicating a "refer" result to parents a difficult step and 8 % felt insecure when explaining the aims and procedures to parents. There was a high interest in further training sessions. This survey served well to reveal aspects of improvement in screening procedures and meeting staff needs. The training sessions should outline practical aspects of conducting screening and also professional, sensitive communication to parents.

The development of "medical futility": towards a procedural approach based on the role of the medical profession.

PubMed

Moratti, S

2009-06-01

Over the past 50 years, technical advances have taken place in medicine that have greatly increased the possibilities of life-prolonging intervention. The increased possibilities of intervening have brought along new ethical questions. Not everything that is technically possible is appropriate in a specific case: not everything that could be done should be done. In the 1980s, a new term was coined to indicate a class of inappropriate "medically futile treatment". A debate followed, with contributions from the USA and several western European countries. A similar debate later took place in Mediterranean countries, although with a different terminology. The purpose of this article is to provide an up-to-date and systematic analysis of the concept of futility, and to draw some conclusions on its operationalisation in medical practice. While the concept of "medical futility" in theory applies to all kinds of medical intervention that might be performed without being medically indicated-things such as certain medical screenings and cosmetic surgery-in practice the literature on "futility" deals only with life-saving and life-sustaining medical interventions. This article deals with this more limited application of the concept of "futility".

An integrated approach to Smart House technology for people with disabilities.

PubMed

Allen, B

1996-04-01

It is now commonly accepted that 'Smart House' technology can play a significant part in helping both elderly and disabled people enjoy a greater degree of independence in the near future. In order to realize this aspiration, it is necessary to examine a number of factors: the development of the appropriate Home Bus technologies and supported devices; the development of the appropriate user interfaces that will allow people with a range of special needs use the system; the incorporation of the requirements of the 'Smart House' controller with the other technological needs of the user; and the development of mainstream technologies that will affect the cost and availability of devices to the user. This paper will examine the above points and suggest appropriate actions and trends. It will draw upon the work of a four-member consortium currently finalizing a technical development project under the EC TIDE program, the experience of research and commercial organizations engaged in development work in associated areas and the experiences of the Dublin-based, Central Remedial Clinic and in particular, its Client Technical Services Unit. The CTSU have been actively engaged in the development of systems for clients and direct clinical assessments for the last 12 years.

The effect of music listening on the anxiety of nursing students during their first blood draw experience.

PubMed

Ince, Serpil; Çevik, Kıvan

2017-05-01

Nursing education is a process aimed both at theoretical knowledge and skill development. The Fundamentals of Nursing is a course that furnishes students with professional knowledge, concepts and technical skills, and, also, is the keystone of nursing education in our country. Students experience a great deal of anxiety as they face basic nursing practices for the first time. Studies have revealed the effectiveness of music in relieving anxiety in many patient groups. However, no previous studies were found where music was used with the intent to lower the anxiety that students experience over the course of skill learning. The experimental study is aimed at determining the effect of music in decreasing anxiety during the first nursing practices of students in a laboratory setting. The experimental study was conducted on nursing students of Akdeniz University attending Fundamentals of Nursing, a freshman course, during the 2013-2014 academic year. A total of 73 students, of which 34 were assigned to the experimental group and 39 to the control group, participated in the study. Data collection was carried out using (a) the student identification form prepared by the authors, (b) skill control lists and (c) the Situational Anxiety Scale. The students in the experimental group listened to music during blood draw skill practice in a laboratory environment. The students were assessed with respect to their performance of blood drawing through skill control lists using the statements "True", "False" and "Forgotten". The anxiety levels and vital signs of students were assessed before and after the practice. The mean age of the students was 19.08. 64.7% of the experimental group and 82.1% of the control group were female. The age group of 64.7% of the students in the experimental group was female. The age group of 82.1% of the students in the control group was female. After music listening, the mean anxiety score of the students was 38.70±3.83 in the experimental group and 39.76±4.72 in the control group. The difference between the mean anxiety scores of the two groups was statistically significant (p<0.05). The evaluation made before and after the blood draw revealed a statistically significant difference in diastolic blood pressure values in the experimental group that listened to music(p<0.05). The results of the study showed that listening to music decreased the anxiety levels of nursing students during their first blood draw experience. Copyright © 2017 Elsevier Ltd. All rights reserved.

Degrees of systematic thoroughness: A text analysis of student technical science writing

NASA Astrophysics Data System (ADS)

Esch, Catherine Julia

This dissertation investigates student technical science writing and use of evidence. Student writers attended a writing-intensive undergraduate university oceanography course where they were required to write a technical paper drawing from an instructor-designed software program, Our Dynamic Planet. This software includes multiple interactive geological data sets relevant to plate tectonics. Through qualitative text analysis of students science writing, two research questions frame the study asking: How are the papers textually structured? Are there distinctions between high- and low-rated papers? General and specific text characteristics within three critical sections of the technical paper are identified and analyzed (Observations, Interpretations, Conclusions). Specific text characteristics consist of typical types of figures displayed in the papers, and typical statements within each paper section. Data gathering consisted of collecting 15 student papers which constitute the population of study. An analytical method was designed to manage and analyze the text characteristics. It has three stages: identifying coding categories, re-formulating the categories, and configuring categories. Three important elements emerged that identified notable distinctions in paper quality: data display and use, narration of complex geological feature relationships, and overall organization of text structure. An inter-rater coding concordance check was conducted, and showed high concordance ratios for the coding of each section: Observations = 0.95; Interpretations = 0.93; and Conclusions = 0.87. These categories collectively reveal a larger pattern of general differences in the paper quality levels (high, low, medium). This variation in the quality of papers demonstrates degrees of systematic thoroughness, which is defined as how systematically each student engages in the tasks of the assignment, and how thoroughly and consistently the student follows through on that systematic commitment. Characterizations of each paper level indicate areas that can be explored to develop an explicit instructional pedagogy to support a greater number of low and medium level students. Implications suggest most students require greater explicit instruction. This involves having students pay more attention to detail, and to demonstrate greater follow through in order to produce a solid scientific argument in their technical papers.

Fluid Vessel Quantity using Non-Invasive PZT Technology Flight Volume Measurements Under Zero G Analysis

NASA Technical Reports Server (NTRS)

Garofalo, Anthony A.

2013-01-01

The purpose of the project is to perform analysis of data using the Systems Engineering Educational Discovery (SEED) program data from 2011 and 2012 Fluid Vessel Quantity using Non-Invasive PZT Technology flight volume measurements under Zero G conditions (parabolic Plane flight data). Also experimental planning and lab work for future sub-orbital experiments to use the NASA PZT technology for fluid volume measurement. Along with conducting data analysis of flight data, I also did a variety of other tasks. I provided the lab with detailed technical drawings, experimented with 3d printers, made changes to the liquid nitrogen skid schematics, and learned how to weld. I also programmed microcontrollers to interact with various sensors and helped with other things going on around the lab.

Antiretroviral Therapy and Nutrition in Southern Africa: Citizenship and the Grammar of Hunger.

PubMed

Cousins, Thomas

2016-01-01

How might we understand and respond to the new forms of hunger that arise with the massive rollout of antiretroviral therapy (ART) for HIV in southern Africa? Rather than 'merely' a technical problem of measurement, medicine or infrastructure, I suggest that a philosophical question arises concerning the relationship between the experience of hunger, the utterances that communicate that experience, and the bodily regimes of well-being and ill-being indexed by such utterances. Taking the gut as a particular kind of mediator of experience, I draw on ethnographic fieldwork conducted in KwaZulu-Natal, South Africa to open up a set of questions on acknowledgment and avoidance. The central question concerns the divergent concepts of 'grammar' that confront the relationship between hunger and ART.

Buildings, Beauty, and the Brain: A Neuroscience of Architectural Experience.

PubMed

Coburn, Alex; Vartanian, Oshin; Chatterjee, Anjan

2017-09-01

A burgeoning interest in the intersection of neuroscience and architecture promises to offer biologically inspired insights into the design of spaces. The goal of such interdisciplinary approaches to architecture is to motivate construction of environments that would contribute to peoples' flourishing in behavior, health, and well-being. We suggest that this nascent field of neuroarchitecture is at a pivotal point in which neuroscience and architecture are poised to extend to a neuroscience of architecture. In such a research program, architectural experiences themselves are the target of neuroscientific inquiry. Here, we draw lessons from recent developments in neuroaesthetics to suggest how neuroarchitecture might mature into an experimental science. We review the extant literature and offer an initial framework from which to contextualize such research. Finally, we outline theoretical and technical challenges that lie ahead.

Fluid Vessel Quantity Using Non-invasive PZT Technology Flight Volume Measurements Under Zero G Analysis

NASA Technical Reports Server (NTRS)

Garofalo, Anthony A

2013-01-01

The purpose of the project is to perform analysis of data using the Systems Engineering Educational Discovery (SEED) program data from 2011 and 2012 Fluid Vessel Quantity using Non-Invasive PZT Technology flight volume measurements under Zero G conditions (parabolic Plane flight data). Also experimental planning and lab work for future sub-orbital experiments to use the NASA PZT technology for fluid volume measurement. Along with conducting data analysis of flight data, I also did a variety of other tasks. I provided the lab with detailed technical drawings, experimented with 3d printers, made changes to the liquid nitrogen skid schematics, and learned how to weld. I also programmed microcontrollers to interact with various sensors and helped with other things going on around the lab.

Ethorobotics: A New Approach to Human-Robot Relationship

PubMed Central

Miklósi, Ádám; Korondi, Péter; Matellán, Vicente; Gácsi, Márta

2017-01-01

Here we aim to lay the theoretical foundations of human-robot relationship drawing upon insights from disciplines that govern relevant human behaviors: ecology and ethology. We show how the paradox of the so called “uncanny valley hypothesis” can be solved by applying the “niche” concept to social robots, and relying on the natural behavior of humans. Instead of striving to build human-like social robots, engineers should construct robots that are able to maximize their performance in their niche (being optimal for some specific functions), and if they are endowed with appropriate form of social competence then humans will eventually interact with them independent of their embodiment. This new discipline, which we call ethorobotics, could change social robotics, giving a boost to new technical approaches and applications. PMID:28649213

Application of the FTA and ETA Method for Gas Hazard Identification for the Performance of Safety Systems in the Industrial Department

NASA Astrophysics Data System (ADS)

Ignac-Nowicka, Jolanta

2018-03-01

The paper analyzes the conditions of safe use of industrial gas systems and factors influencing gas hazards. Typical gas installation and its basic features have been characterized. The results of gas threat analysis in an industrial enterprise using FTA error tree method and ETA event tree method are presented. Compares selected methods of identifying hazards gas industry with respect to the scope of their use. The paper presents an analysis of two exemplary hazards: an industrial gas catastrophe (FTA) and an explosive gas explosion (ETA). In both cases, technical risks and human errors (human factor) were taken into account. The cause-effect relationships of hazards and their causes are presented in the form of diagrams in the drawings.

[GERD: endoscopic antireflux therapies].

PubMed

Caca, K

2006-08-02

A couple of minimally-invasive, endoscopic antireflux procedures have been developed during the last years. Beside endoscopic suturing these included injection/implantation technique of biopolymers and application of radiofrequency. Radiofrequency (Stretta) has proved only a very modest effect, while implantation techniques have been abandoned due to lack of long-term efficacy (Gatekeeper) or serious side effects (Enteryx). While first generation endoluminal suturing techniques (EndoCinch, ESD) demonstrated a proof of principle their lack of durability, due to suture loss, led to the development of a potentially durable transmural plication technique (Plicator). In a prospective-randomized, sham-controlled trial the Plicator procedure proved superiority concerning reflux symptoms, medication use and esophageal acid exposure (24-h-pH-metry). While long-term data have to be awaited to draw final conclusions, technical improvements will drive innovation in this field.

Auricular Chromotherapy in the Treatment of Psychologic Trauma, Phobias, and Panic Disorder

PubMed Central

Asis, Daniel Guillermo; Luz, Fabiola Andrade

2018-01-01

Abstract Auricular chromotherapy has shown promising results in the treatment of psychologic trauma and anxiety disorders, such as phobias and panic attacks. With its relatively easy and quick technical application, this procedure could be an indispensable tool for physicians. However, its mechanism of action is not yet understood completely. Objective: To treat patients suffering from trauma, phobia, and panic attack with auricular chromotherapy. Materials and Methods: The protocol was applied in 160 patients (135 who experienced traumas; 15 patients with specific phobias and 10 patients with panic disorder). They are 134 women, 26 men, ages 20–60. Results: The treatment showed 93% of positive response. Conclusion: This procedure shows the possibility of drawing a path from the external ear to traumatic memories, anxiety disorders and phobias.

Level of Immersion in Virtual Environments Impacts the Ability to Assess and Teach Social Skills in Autism Spectrum Disorder

PubMed Central

Bugnariu, Nicoleta L.

2016-01-01

Abstract Virtual environments (VEs) may be useful for delivering social skills interventions to individuals with autism spectrum disorder (ASD). Immersive VEs provide opportunities for individuals with ASD to learn and practice skills in a controlled replicable setting. However, not all VEs are delivered using the same technology, and the level of immersion differs across settings. We group studies into low-, moderate-, and high-immersion categories by examining five aspects of immersion. In doing so, we draw conclusions regarding the influence of this technical manipulation on the efficacy of VEs as a tool for assessing and teaching social skills. We also highlight ways in which future studies can advance our understanding of how manipulating aspects of immersion may impact intervention success. PMID:26919157

Global Alcohol Producers, Science, and Policy: The Case of the International Center for Alcohol Policies

PubMed Central

2012-01-01

In this article, I document strategies used by alcohol producers to influence national and global science and policy. Their strategies include producing scholarly publications with incomplete, distorted views of the science underlying alcohol policies; pressuring national and international governmental institutions; and encouraging collaboration of public health researchers with alcohol industry–funded organizations and researchers. I conclude with a call for an enhanced research agenda drawing on sources seldom used by public health research, more focused resourcing of global public health bodies such as the World Health Organization to counterbalance industry initiatives, development of technical assistance and other materials to assist countries with effective alcohol-control strategies, and further development of an ethical stance regarding collaboration with industries that profit from unhealthy consumption of their products. PMID:22095330

Groundwater quality at the Saline Valley Conservancy District well field, Gallatin County, Illinois

USGS Publications Warehouse

Gorczynska, Magdalena; Kay, Robert T.

2016-08-29

The Saline Valley Conservancy District (SVCD) operates wells that supply water to most of the water users in Saline and Gallatin Counties, Illinois. The SVCD wells draw water from a shallow sand and gravel aquifer located in close proximity to an abandoned underground coal mine, several abandoned oil wells, and at least one operational oil well. The aquifer that yields water to the SVCD wells overlies the New Albany Shale, which may be subjected to shale-gas exploration by use of hydraulic fracturing. The SVCD has sought technical assistance from the U.S. Geological Survey to characterize baseline water quality at the SVCD well field so that future changes in water quality (if any) and the cause of those changes (including mine leachate and hydraulic fracturing) can be identified.

Teachers' Perceptions about the Barriers and Catalysts for Effective Practices with ICT in Primary Schools

NASA Astrophysics Data System (ADS)

Dakich, Eva

This paper presents perceptions of four primary school teachers from two Victorian government primary schools about the barriers and catalyst for effective practices with ICT. Findings of the semi-structured qualitative interviews confirm results of previous studies indicating that access to reliable infrastructure, adequate technical support, and time pressures are still considered to be some of the most significant barriers to successful ICT integration in public schools. Teacher interviews however also reveal that the challenges of integrating ICT in teaching and learning can be counterbalanced by a number of variables, which include: owning a laptop, having access to ongoing professional learning, sharing effective practices, drawing on student expertise and being supported by a whole-school approach to teaching and learning with ICT.

Patent Documents as a Resource for Studies and Education in Geophysics - An Approach.

NASA Astrophysics Data System (ADS)

Wollny, K. G.

2016-12-01

Patents are a highly neglected source of information in geophysics, although they supply a wealth of technical and historically relevant data and might be an important asset for researchers and students. The technical drawings and descriptions in patent documents provide insight into the personal work of a researcher or a scientific group and give detailed technical background information, show interdisciplinary solutions for similar problems, help to learn about inventions too advanced for their time but maybe useful now, and to explore the historical background and timelines of inventions and their inventors. It will be shown how to get access to patent documents and how to use them for research and education purposes. Exemplary inventions by well-known geoscientists or scientists in related fields will be presented to illustrate the usefulness of patent documents. The data pool used is the International Patent Classification (IPC) class G01V that the United Nations' World Intellectual Property Organisation (WIPO) has set up mainly for inventions with key aspects in geophysics. This class contains approximately 235,000 patent documents (July 2016) for methods, apparatuses or scientific instruments developed during scientific projects or by geophysical companies. The patent documents can be accessed via patent databases. The most important patent databases are for free, search functionality is self-explanatory and the amount of information to be extracted is enormous. For example, more than 90 million multilingual patent documents are currently available online (July 2016) in DEPATIS database of the German Patent and Trade Mark Office or ESPACENET of the European Patent Office. To summarize, patent documents are a highly useful tool for educational and research purposes to strengthen students' and scientists' knowledge in a practically orientated geophysical field and to widen the horizon to adjacent technical areas. Last but not least, they also provide insight into historical aspects of geophysics and the persons working in that area.

The effect of normative social forces on managed care organizations: implications for strategic management.

PubMed

Kirby, E G; Sebastian, J G

1998-01-01

Drawing on institutional theory, this study examines how adherence to a number of "institutional" and "technical" environmental forces can influence the business success of managed care organizations (MCOs). The standards studied include: (1) institutional forces: socially accepted procedures for delivering care (access to quality care, availability of information, and delivery of care in a personal manner); and (2) technical forces: industry standards for cost control and efficient use of financial and medical resources. The most significant finding is that successful MCOs must conform to both institutional and technical forces to be successful. MCOs that conform to either one or the other type of standard were no more successful than those that conformed to neither. These findings have several important implications for MCO strategy. First, to be successful, MCO executives must understand the external environment in which they operate. They must anticipate and respond to shifts in that environment. Second, this understanding of the external environment must place equal emphasis on societal demands (e.g., for accessible care and information) and on technical demands (e.g., for cost-efficient care). These findings may well reflect that once managed care penetration reaches relatively high levels, marketshare can no longer be gained through cost-efficiency alone; rather, enrollee satisfaction based on societal demands becomes a key factor in maintaining and gaining marketshare. Institutional theory provides' some strategies for accomplishing these goals. Cost-containment strategies include implementing policies for cutting costs in areas that do not affect the quality of care, such as using generic drugs and reducing administrative excesses and redundancies. At the same time, MCOs must implement strategies aimed at improving conformity to prevailing societal perceptions of appropriate care, including providing patients more freedom to choose their physicians and encouraging and rewarding care providers for being friendly and personable. An MCO should work to inform the public of the organization's efforts to provide high-quality, low-cost medical care in a friendly, convenient manner.

Mediators and Adverse Effects of Child Poverty in the United States.

PubMed

Pascoe, John M; Wood, David L; Duffee, James H; Kuo, Alice

2016-04-01

The link between poverty and children's health is well recognized. Even temporary poverty may have an adverse effect on children's health, and data consistently support the observation that poverty in childhood continues to have a negative effect on health into adulthood. In addition to childhood morbidity being related to child poverty, epidemiologic studies have documented a mortality gradient for children aged 1 to 15 years (and adults), with poor children experiencing a higher mortality rate than children from higher-income families. The global great recession is only now very slowly abating for millions of America's children and their families. At this difficult time in the history of our nation's families and immediately after the 50th anniversary year of President Lyndon Johnson's War on Poverty, it is particularly germane for the American Academy of Pediatrics, which is "dedicated to the health of all children," to publish a research-supported technical report that examines the mediators associated with the long-recognized adverse effects of child poverty on children and their families. This technical report draws on research from a number of disciplines, including physiology, sociology, psychology, economics, and epidemiology, to describe the present state of knowledge regarding poverty's negative impact on children's health and development. Children inherit not only their parents' genes but also the family ecology and its social milieu. Thus, parenting skills, housing, neighborhood, schools, and other factors (eg, medical care) all have complex relations to each other and influence how each child's genetic canvas is expressed. Accompanying this technical report is a policy statement that describes specific actions that pediatricians and other child advocates can take to attenuate the negative effects of the mediators identified in this technical report and improve the well-being of our nation's children and their families. Copyright © 2016 by the American Academy of Pediatrics.

Translation from the collaborative OSM database to cartography

NASA Astrophysics Data System (ADS)

Hayat, Flora

2018-05-01

The OpenStreetMap (OSM) database includes original items very useful for geographical analysis and for creating thematic maps. Contributors record in the open database various themes regarding amenities, leisure, transports, buildings and boundaries. The Michelin mapping department develops map prototypes to test the feasibility of mapping based on OSM. To translate the OSM database structure into a database structure fitted with Michelin graphic guidelines a research project is in development. It aims at defining the right structure for the Michelin uses. The research project relies on the analysis of semantic and geometric heterogeneities in OSM data. In that order, Michelin implements methods to transform the input geographical database into a cartographic image dedicated for specific uses (routing and tourist maps). The paper focuses on the mapping tools available to produce a personalised spatial database. Based on processed data, paper and Web maps can be displayed. Two prototypes are described in this article: a vector tile web map and a mapping method to produce paper maps on a regional scale. The vector tile mapping method offers an easy navigation within the map and within graphic and thematic guide- lines. Paper maps can be partly automatically drawn. The drawing automation and data management are part of the mapping creation as well as the final hand-drawing phase. Both prototypes have been set up using the OSM technical ecosystem.

What are the Dominant Factors of Students’ Productive Skills in Construction Services?

NASA Astrophysics Data System (ADS)

Oroh, R. R.; S, Haris A.; Sugandi, R. M.; Isnandar

2018-02-01

The purpose of this study to determine the dominant factors of students’ productive skills in doing the work of concrete structures that fit the needs of construction services. Sample of the respondents is vocational high school students from several districts and cities in North Sulawesi, Indonesia. Data are obtained through the performance test instruments of student. Whereas, data analysis is performed using factor analysis. The result of this research show the dominant factors of the students’ productive skills in doing the work of concrete structures that is according to the need of construction services, namely: (a) factor the working of concrete casting consists of making scaffolding from good materials and conducting concrete casting according to working method; and (b) factor the working of concrete reinforcing consists of read the working drawings for concrete reinforcement and make the concrete formwork from good material. Some of the respondent’s students in doing some concrete structure work have done well, but not yet according to working drawings, working methods and technical specifications of the work. The learning is done in accordance with the competency-oriented school curriculum but the teaching materials given have not been maximized in accordance with the needs of productive skills required construction services industry. The results have an impact on the low absorption of graduates in the implementation of the construction services industry.

Building a learning health system using clinical registers: a non-technical introduction.

PubMed

Ovretveit, John; Nelson, Eugene; James, Brent

2016-10-10

Purpose The purpose of this paper is to describe how clinical registers were designed and used to serve multiple purposes in three health systems, in order to contribute practical experience for building learning healthcare systems. Design/methodology/approach Case description and comparison of the development and use of clinical registries, drawing on participants' experience and published and unpublished research. Findings Clinical registers and new software systems enable fact-based decisions by patients, clinicians, and managers about better care, as well as new and more economical research. Designing systems to present the data for users' daily work appears to be the key to effective use of the potential afforded by digital data. Research limitations/implications The case descriptions draw on the experience of the authors who were involved in the development of the registers, as well as on published and unpublished research. There is limited data about outcomes for patients or cost-effectiveness. Practical implications The cases show the significant investments which are needed to make effective use of clinical register data. There are limited skills to design and apply the digital systems to make the best use of the systems and to reduce their disadvantages. More use can be made of digital data for quality improvement, patient empowerment and support, and for research. Social implications Patients can use their data combined with other data to self-manage their chronic conditions. There are challenges in designing and using systems so that those with lower health and computer literacy and incomes also benefit from these systems, otherwise the digital revolution may increase health inequalities. Originality/value The paper shows three real examples of clinical registers which have been developed as part of their host health systems' strategies to develop learning healthcare systems. The paper gives a simple non-technical introduction and overview for clinicians, managers, policy-advisors and improvers of what is possible and the challenges, and highlights the need to shape the design and implementation of digital infrastructures in healthcare services to serve users.

Integration of communications with the Intelligent Gateway Processor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hampel, V.E.

1986-01-01

The Intelligent Gateway Processor (IGP) software is being used to interconnect users equipped with different personal computers and ASCII terminals to mainframe machines of different make. This integration is made possible by the IGP's unique user interface and networking software. Prototype systems of the table-driven, interpreter-based IGP have been adapted to very different programmatic requirements and have demonstrated substantial increases in end-user productivity. Procedures previously requiring days can now be carried out in minutes. The IGP software has been under development by the Technology Information Systems (TIS) program at Lawrence Livermore National Laboratory (LLNL) since 1975 and is in usemore » by several federal agencies since 1983: The Air Force is prototyping applications which range from automated identification of spare parts for aircraft to office automation and the controlled storage and distribution of technical orders and engineering drawings. Other applications of the IGP are the Information Management System (IMS) for aviation statistics in the Federal Aviation Administration (FAA), the Nuclear Criticality Information System (NCIS) and a nationwide Cost Estimating System (CES) in the Department of Energy, the library automation network of the Defense Technical Information Center (DTIC), and the modernization program in the Office of the Secretary of Defense (OSD). 31 refs., 9 figs.« less

Analysis of Waste Isolation Pilot Plant Samples: Integrated Summary Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Britt, Phillip F

2015-03-01

Analysis of Waste Isolation Pilot Plant Samples: Integrated Summary Report. Summaries of conclusions, analytical processes, and analytical results. Analysis of samples taken from the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico in support of the WIPP Technical Assessment Team (TAT) activities to determine to the extent feasible the mechanisms and chemical reactions that may have resulted in the breach of at least one waste drum and release of waste material in WIPP Panel 7 Room 7 on February 14, 2014. This report integrates and summarizes the results contained in three separate reports, described below, and draws conclusions basedmore » on those results. Chemical and Radiochemical Analyses of WIPP Samples R-15 C5 SWB and R16 C-4 Lip; PNNL-24003, Pacific Northwest National Laboratory, December 2014 Analysis of Waste Isolation Pilot Plant (WIPP) Underground and MgO Samples by the Savannah River National Laboratory (SRNL); SRNL-STI-2014-00617; Savannah River National Laboratory, December 2014 Report for WIPP UG Sample #3, R15C5 (9/3/14); LLNL-TR-667015; Lawrence Livermore National Laboratory, January 2015 This report is also contained in the Waste Isolation Pilot Plant Technical Assessment Team Report; SRNL-RP-2015-01198; Savannah River National Laboratory, March 17, 2015, as Appendix C: Analysis Integrated Summary Report.« less

A Taxonomy of Accountable Care Organizations for Policy and Practice

PubMed Central

Shortell, Stephen M; Wu, Frances M; Lewis, Valerie A; Colla, Carrie H; Fisher, Elliott S

2014-01-01

Objective To develop an exploratory taxonomy of Accountable Care Organizations (ACOs) to describe and understand early ACO development and to provide a basis for technical assistance and future evaluation of performance. Data Sources/Study Setting Data from the National Survey of Accountable Care Organizations, fielded between October 2012 and May 2013, of 173 Medicare, Medicaid, and commercial payer ACOs. Study Design Drawing on resource dependence and institutional theory, we develop measures of eight attributes of ACOs such as size, scope of services offered, and the use of performance accountability mechanisms. Data are analyzed using a two-step cluster analysis approach that accounts for both continuous and categorical data. Principal Findings We identified a reliable and internally valid three-cluster solution: larger, integrated systems that offer a broad scope of services and frequently include one or more postacute facilities; smaller, physician-led practices, centered in primary care, and that possess a relatively high degree of physician performance management; and moderately sized, joint hospital–physician and coalition-led groups that offer a moderately broad scope of services with some involvement of postacute facilities. Conclusions ACOs can be characterized into three distinct clusters. The taxonomy provides a framework for assessing performance, for targeting technical assistance, and for diagnosing potential antitrust violations. PMID:25251146

Writing social psychology: fictional things and unpopulated texts.

PubMed

Billig, Michael

2011-03-01

This paper presents the author's position on the question how to write social psychology. It reflects the author's long-term interest in rhetoric and his more recent concerns about the writing of social scientists. The author argues that social psychologists tend to produce unpopulated texts, writing about 'fictional things' rather than people. Social psychologists assume that their technical terms are more precise than ordinary language terms. The author contests this assumption. He suggests that when it comes to describing human actions, ordinary language on the whole tends to be more precise. The paper analyses why this should be the case, drawing on ideas from linguistics and Vaihinger's notion of fictions. The author presents examples to show how psychological writers, by using passives and nominals, can omit information about the agents of action and the nature of the actions that they are performing. Although their texts may appear impressively technical, they can, in fact, be highly imprecise. Moreover, social psychologists, by using this nominal style of writing, tend to write about processes as if they were things and then attribute actions to these things. In so doing, they create 'fictional things', which they treat as if they were real things. The author offers six recommendations for writing in simpler, clearer ways. ©2011 The British Psychological Society.

Report on the International Workshop on Drug Prevention and Treatment in Rural Settings Organized by United Nation Office on Drugs and Crime (UNODC) and World Health Organization (WHO).

PubMed

Milano, Giulia; Saenz, Elizabeth; Clark, Nicolas; Busse, Anja; Gale, John; Campello, Giovanna; Mattfeld, Elizabeth; Maalouf, Wadih; Heikkila, Hanna; Martelli, Antonietta; Morales, Brian; Gerra, Gilberto

2017-11-10

Very little evidence has been reported in literature regarding the misuse of substances in rural areas. Despite the common perception of rural communities as a protective and risk-mitigating environment, the scientific literature demonstrated the existence of many risk factors in rural communities. The Drug Prevention and Health Branch (DHB) of the United Nations Office on Drugs and Crime (UNODC), and the World Health Organization (WHO), in June 2016, organized a meeting of experts in treatment and prevention of SUDs in rural settings. The content presented during the meeting and the related discussion have provided materials for the preparation of an outline document, which is the basis to create a technical tool on SUDs prevention and treatment in rural settings. The UNODC framework for interventions in rural settings is a technical tool aimed to assist policy makers and managers at the national level. This paper is a report on UNODC/WHO efforts to improve the clinical conditions of people affected by SUDs and living in rural areas. The purpose of this article is to draw attention on a severe clinical and social problem in a reality forgotten by everyone.

South African CSP projects under the REIPPP programme - Requirements, challenges and opportunities

NASA Astrophysics Data System (ADS)

Relancio, Javier; Cuellar, Alberto; Walker, Gregg; Ettmayr, Chris

2016-05-01

Thus far seven Concentrated Solar Power (CSP) projects have been awarded under the Renewable Energy Independent Power Producer Procurement Programme (REIPPPP), totalling 600MW: one project is in operation, four under construction and two on their way to financial close. This provides an excellent opportunity for analysis of key features of the projects that have contributed to or detracted from the programme's success. The paper draws from Mott MacDonald's involvement as Technical Advisor on the seven CSP projects that have been successful under the REIPPPP to date as well as other global CSP developments. It presents how various programme requirements have affected the implementation of projects, such as the technical requirements, time of day tariff structure, economic development requirements and the renewable energy grid code. The increasingly competitive tariffs offered have encouraged developers to investigate efficiency maximising project configurations and cost saving mechanisms, as well as featuring state of the art technology in their proposals. The paper assesses the role of the project participants (developers, lenders and government) with regards to these innovative technologies and solutions. In our paper we discuss the status of projects and the SA market, analysing the main challenges and opportunities that in turn have influenced various aspects such as technology choice, operational regimes and supply chain arrangements.

Touching the Earth: the Role of Art in Scientific Thinking

NASA Astrophysics Data System (ADS)

Cashman, K. V.; Stibbon, E.; Harris, R.

2015-12-01

Historically, geologists have used drawing as a tool not only to record observations but also to engage with the landscape and the materials from which it is constructed. Although geology students are still taught to keep field notebooks, the emphasis on drawing has given way to training in digital tools such as photography and GIS. Has this change altered our perception of our environment, and, thereby, affected the ways that we pursue scientific questions? We address this question through conversations - in the laboratory, studio and field - between artists and scientists that show that we (1) engage with the landscape both rationally and emotionally, (2) are attracted to earth materials because of their form, color, physical qualities and origin/history, (3) overcome technical challenges to realize an end result from an initial idea, (4) struggle to achieve a balance between critical faculties and creative insight, and (5) must communicate ideas, often before they are fully formed, to potential funders. Importantly, we find that the act of rendering (in 2D or 3D), and the ways in which the trace of the hand on paper (or manipulation of clay) engages a part of the brain that is not used in computer-based activities. At the same time, a geological understanding of earth materials enhances their metaphorical applications in the arts. Taken together, these conversations lead us to suggest that more cross-disciplinary training - training scientists in art and artists in science - would not only allow us to explore common themes from different perspectives, but could also create new ways of doing both art and science. Here we provide some examples, such as (1) the importance of drawing for moving from looking to seeing (observation to understanding), (2) ways of engaging perceptions through experimentation, (3) how to reveal the hidden by combining microscopic and macroscopic views of earth materials, and (4) using art as both a language and an interpretive tool. Viewed pragmatically, these examples address the scientific challenge of sketching conceptual ideas in a way that is convincing to both ourselves and to others. More broadly, we explore what may have been lost to earth science by eliminating formal training in drawing, and what might be gained by re-introducing the arts into the earth science curriculum.

An eye movement pre-training fosters the comprehension of processes and functions in technical systems

PubMed Central

Skuballa, Irene T.; Fortunski, Caroline; Renkl, Alexander

2015-01-01

The main research goal of the present study was to investigate in how far pre-training eye movements can facilitate knowledge acquisition in multimedia (pre-training principle). We combined considerations from research on eye movement modeling and pre-training to design and test a non-verbal eye movement-based pre-training. Participants in the experimental condition watched an animated circle moving in close spatial resemblance to a static visualization of a solar plant accompanied by a narration in a subsequently presented learning environment. This training was expected to foster top-down processes as reflected in gaze behavior during the learning process and enhance knowledge acquisition. We compared two groups (N = 45): participants in the experimental condition received pre-training in a first step and processed the learning material in a second step, whereas the control group underwent the second step without any pre-training. The pre-training group outperformed the control group in their learning outcomes, particularly in knowledge about processes and functions of the solar plant. However, the superior learning outcomes in the pre-training group could not be explained by eye-movement patterns. Furthermore, the pre-training moderated the relationship between experienced stress and learning outcomes. In the control group, high stress levels hindered learning, which was not found for the pre-training group. On a delayed posttest participants were requested to draw a picture of the learning content. Despite a non-significant effect of training on the quality of drawings, the pre-training showed associations between learning outcomes at the first testing time and process-related aspects in the quality of their drawings. Overall, non-verbal pre-training is a successful instructional intervention to promote learning processes in novices although these processes did not directly reflect in learners' eye movement behavior during learning. PMID:26029138

Application for certification 1980 model year light-duty vehicles - Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems, and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification, 1990 model-year light-duty vehicles - Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification 1993 model year light-duty vehicles - Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification, 1991 model-year light-duty vehicles - Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model-year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the application containsmore » the results of emission testing, a statement of compliance to the regulations, production engine parameters and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification 1981 model year light-duty vehicles - Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Sex, gender and work segregation in the cultural industries

PubMed Central

Hesmondhalgh, David; Baker, Sarah

2015-01-01

This chapter addresses work ‘segregation’ by sex in the cultural industries. We outline some of the main forms this takes, according to our observations: the high presence of women in marketing and public relations roles; the high numbers of women in production co-ordination and similar roles; the domination of men of more prestigious creative roles; and the domination by men of technical jobs. We then turn to explanation: what gender dynamics drive such patterns of work segregation according to sex? Drawing on interviews, we claim that the following stereotypes or prevailing discourses, concerning the distinctive attributes of women and men, may influence such segregation: that women are more caring, supportive and nurturing; that women are better communicators; that women are ‘better organized’; and that men are more creative because they are less bound by rules. PMID:26166905

Customer care in the NHS.

PubMed

Ruddick, Fred

2015-01-20

Viewing individuals in need of NHS care as customers has the potential to refocus the way their care is delivered. This article highlights some of the benefits of reframing the nurse-patient relationship in terms of customer care, and draws parallels between good customer care and the provision of high quality patient care in the NHS. It explores lessons to be learned from those who have studied the customer experience, which can be adapted to enhance the customer care experience within the health service. Developing professional expertise in the knowledge and skills that underpin good-quality interpersonal encounters is essential to improve the customer experience in health care and should be prioritised alongside the development of more technical skills. Creating a culture where emotional intelligence, caring and compassion are essential requirements for all nursing staff will improve patient satisfaction.

Sex, gender and work segregation in the cultural industries.

PubMed

Hesmondhalgh, David; Baker, Sarah

2015-05-01

This chapter addresses work 'segregation' by sex in the cultural industries. We outline some of the main forms this takes, according to our observations: the high presence of women in marketing and public relations roles; the high numbers of women in production co-ordination and similar roles; the domination of men of more prestigious creative roles; and the domination by men of technical jobs. We then turn to explanation: what gender dynamics drive such patterns of work segregation according to sex? Drawing on interviews, we claim that the following stereotypes or prevailing discourses, concerning the distinctive attributes of women and men, may influence such segregation: that women are more caring, supportive and nurturing; that women are better communicators; that women are 'better organized'; and that men are more creative because they are less bound by rules.

Engineers' professional learning: a practice-theory perspective

NASA Astrophysics Data System (ADS)

Reich, Ann; Rooney, Donna; Gardner, Anne; Willey, Keith; Boud, David; Fitzgerald, Terry

2015-07-01

With the increasing challenges facing professional engineers working in more complex, global and interdisciplinary contexts, different approaches to understanding how engineers practice and learn are necessary. This paper draws on recent research in the social sciences from the field of workplace learning, to suggest that a practice-theory perspective on engineers' professional learning is fruitful. It shifts the focus from the attributes of the individual learner (knowledge, skills and attitudes) to the attributes of the practice (interactions, materiality, opportunities and challenges). Learning is thus more than the technical acquisition and transfer of knowledge, but a complex bundle of activities, that is, social, material, embodied and emerging. The paper is illustrated with examples from a research study of the learning of experienced engineers in the construction industry to demonstrate common practices - site walks and design review meetings - in which learning takes place.

The Development of Dispatcher Training Simulator in a Thermal Energy Generation System

NASA Astrophysics Data System (ADS)

Hakim, D. L.; Abdullah, A. G.; Mulyadi, Y.; Hasan, B.

2018-01-01

A dispatcher training simulator (DTS) is a real-time Human Machine Interface (HMI)-based control tool that is able to visualize industrial control system processes. The present study was aimed at developing a simulator tool for boilers in a thermal power station. The DTS prototype was designed using technical data of thermal power station boilers in Indonesia. It was then designed and implemented in Wonderware Intouch 10. The resulting simulator came with component drawing, animation, control display, alarm system, real-time trend, historical trend. This application used 26 tagnames and was equipped with a security system. The test showed that the principles of real-time control worked well. It is expected that this research could significantly contribute to the development of thermal power station, particularly in terms of its application as a training simulator for beginning dispatchers.

Collaborative and Multilingual Approach to Learn Database Topics Using Concept Maps

PubMed Central

Calvo, Iñaki

2014-01-01

Authors report on a study using the concept mapping technique in computer engineering education for learning theoretical introductory database topics. In addition, the learning of multilingual technical terminology by means of the collaborative drawing of a concept map is also pursued in this experiment. The main characteristics of a study carried out in the database subject at the University of the Basque Country during the 2011/2012 course are described. This study contributes to the field of concept mapping as these kinds of cognitive tools have proved to be valid to support learning in computer engineering education. It contributes to the field of computer engineering education, providing a technique that can be incorporated with several educational purposes within the discipline. Results reveal the potential that a collaborative concept map editor offers to fulfil the above mentioned objectives. PMID:25538957

Network systems security analysis

NASA Astrophysics Data System (ADS)

Yilmaz, Ä.°smail

2015-05-01

Network Systems Security Analysis has utmost importance in today's world. Many companies, like banks which give priority to data management, test their own data security systems with "Penetration Tests" by time to time. In this context, companies must also test their own network/server systems and take precautions, as the data security draws attention. Based on this idea, the study cyber-attacks are researched throughoutly and Penetration Test technics are examined. With these information on, classification is made for the cyber-attacks and later network systems' security is tested systematically. After the testing period, all data is reported and filed for future reference. Consequently, it is found out that human beings are the weakest circle of the chain and simple mistakes may unintentionally cause huge problems. Thus, it is clear that some precautions must be taken to avoid such threats like updating the security software.

Application for certification 1987 model year light-duty vehicles - Peugeot

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. The engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. They also provide information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification 1981 model year light-duty vehicles - Peugeot

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Skills on the Move: Rethinking the Relationship Between Human Capital and Immigrant Economic Mobility *

PubMed Central

Hagan, Jacqueline; Lowe, Nichola; Quingla, Christian

2013-01-01

Studies of immigrant labor market incorporation in the unregulated sector of the US economy either assume that immigrant workers are trapped in low-wage jobs because of low human capital, or paint a picture of blocked mobility because of exploitation and discrimination. In this paper we offer a third sociological alternative to understand processes of occupational mobility and skill learning. Drawing on work histories of 111 immigrant construction workers, we find that many immigrants are skilled, having come to their jobs with technical skill sets acquired in their home communities and their previous U.S. jobs. We further find that these less-educated immigrants, who rank low on traditional human capital attributes but high on work experience may circumvent exploitation and build mobility pathways through skill transference, on- the- job reskilling, and brincando (job jumping). PMID:23700356

A Study for the Restoration of the Sundials in King Sejong Era

NASA Astrophysics Data System (ADS)

Lee, Yong Sam; Kim, Sang Hyuk

2011-06-01

The sundials produced in King Sejong era had the functions of accurate observation instruments and were fabricated in various forms such as Angbuilgu (hemispherical sundial). In this study, we investigated the literature, structural characteristics and principles of Hyeonjuilgu, Cheonpyeongilgu and Jeongnamilgu that were developed in Joseon to have the unique structures. Additionally, the sundials were reviewed in the perspective of technical history by comparing them with the sundials of China. For the restoration of the sundials, we identified the principle in which the light spots and shade of the sun were used, and drew the variations of the altitude and azimuth by the yearly motion of the sun on the Siban on the hemispheric and flat surfaces. Based on these results, we completed the design drawings of the three sundials and proposed the restoration models.

Sketching together the modern histories of science, technology, and medicine.

PubMed

Pickstone, John V

2011-03-01

This essay explores ways to "write together" the awkwardly jointed histories of "science" and "me dicine"--but it also includes other "arts" (in the old sense) and technologies. It draws especially on the historiography of medicine, but I try to use terms that are applicable across all of science, technology, and medicine (STM). I stress the variety of knowledges and practices in play at any time and the ways in which the ensembles change. I focus on the various relations of "science" and "medicine," as they were understood for a succession of periods--from mainly agricultural societies, through industrial societies, to our biomedical present--trying to sketch a history that encompasses daily practices and understandings as well as major conceptual and technical innovations. The model is meant to facilitate inquiry across topics and across times, including those to come.

Thin film system with integrated load and temperature sensors for the technical application in deep drawing process

NASA Astrophysics Data System (ADS)

Biehl, Saskia; Paetsch, Nancy; Meyer-Kornblum, Eike

2017-05-01

In these days industry 4.0 resounded throughout the land and means the fourth industrial revolution. The industry has to tackle the task of a flexible and customer-oriented production. Therefor the need of sensor systems for the measurement of temperature and load, the two most important categories in production, is rising. For getting the real specification during the production process the integration of sensor elements in high load regions of machinery is very important. Thus wear resistant thin film sensor systems directly applied onto the surface of plant components are in development. These multilayer systems combine excellent wear resistance with sensory behaviour. The sensor data will lead to a deeper process understanding, to optimization of simulation tools, to reduction of rejects and to an improvement of flexibility in production.

The duality of health technology in chronic illness: how designers envision our future.

PubMed

Lehoux, Pascale

2008-06-01

This essay critically explores the role of technological innovation in the constitution of chronic states and illness. Drawing on the co-construction of technology and society perspective, it focuses more specifically on the way in which innovation designers envisage the enhancement of the chronically ill and build certain kinds of socio-technical configuration to deal with chronic illness. Using the case of ;intelligent distance patient monitoring' as an illustration, the paper argues that technology creates as much as it solves the problem of chronic illness. Technology is recursively embedded in chronic illness and it generates dual effects: it constrains and sustains users' daily practices. Only by recognizing technology's duality and eventually transcending it will research and policy initiatives be able to deal creatively and responsibly with the design of our future health experiences.

[Time-Temperature indicators (TTI). A means of quality control of produce].

PubMed

Durand, M P

1996-11-01

The author, after having dwelt on the mediatic importance of bacterial food poisonings, analyses their reasons, insisting on the importance of the temperature as a factor of bacterial growth. Among the cures for the association temperature-bacterial growth, the author draws attention to the benefits of the use of the time temperature indicators (TTI). He describes the purposes, the required qualities, the principles of activity. The "Lifelines TTI" proves to be interesting. The author describes the principles of activity, the directions for reading the results, the practical application. Finally he describes the remarks following on its use in large scale in a group of chain-stores. In the conclusion, the author points that these TTI are an attractive technical innovation regarding to the fresh foods, for the control of coldness in the human nutrition.

[Raising children with mental disabilities: mothers' narratives].

PubMed

Bastos, Olga Maria; Deslandes, Suely Ferreira

2008-09-01

Technical advances in neonatology have increased the life expectancy of children with serious health problems. Many of these children experience developmental delay (mental disability) and require special care. The family must adapt to better provide for the child's needs. This study aimed to identify mothers' reactions and the obstacles they face to obtain what they consider the best treatment for their children. The study methodology was based on analysis of the mothers' narratives, drawing on medical anthropology and linguistics. The most typical plots in the narratives showed the impact of the diagnosis and the search for means to adapt to the child's care, as well as the difficulties encountered in the public health system to obtain what the mothers considered adequate care. The value ascribed to characters in the support network showed the importance of such support in these situations.

Development of turbomachinery trains for the CASHING, NGCASH, and IGCASH cycle applications: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gaul, G.; Nakhamkin, M.; Swensen, E.

1994-12-01

Turbomachinery trains were conceptually developed for three power plant concepts: Compressed Air Storage with Humidification and Integrated Gasification and Natural Gas Firing (CASHING), Natural Gas fired Compressed Air Storage with Humidification (NGCASH), and Integrated Gasification fired Compressed Air Storage with Humidification (IGCASH). Performance data, arrangement drawings, cost estimates, and other technical information for the three turboexpander trains were developed based on the Westinghouse BB51 steam turbine for the high pressure expander and the expander section of the W501F or W501D5 combustion turbine for the low pressure expander. The study supports previous EPRI projects investigating the performance and cost of CASHING,more » NGCASH, and IGCASH concepts and provides a basis for quotations that can be used in evaluating compressed air energy storage concepts in future projects.« less

Understanding the Social Implications of ICT in Medicine and Health: The Role of Professional Societies.

PubMed

O'connell, Brian M; Laxminarayan, Swamy

2005-01-01

In past times, engineers and other ICT professionals could normally function exclusively within an environment of purely technical dimensions. This sphere could be easily delineated from those involving policy, political or social questions. Consequently, these professions could well be characterized as generally isolated from mainstream society, engendering a condition that Zussman (1985) has described as a "technical rationality that is the engineer's stock-in-trade requir[ing] the calculation of means for the realization of given ends. But it requir[ing] no broad insight into those ends or their consequences". This condition has often led to a perceived technical mindset that according to Florman (1976), draws upon "the comfort that comes with the total absorption in a mechanical environment. The world becomes reduced and manageable, controlled and unchaotic".In a relatively short period of time, ICT has been radically transformed in both its capabilities and reach. Specifically, within the context of this event, the permeation of digital technologies into nearly every aspect of bioengineering and healthcare delivery have broken down the borders between technological pursuits and the larger dynamics of society. This has in turn has produced, according to Williams (2000) a discipline that has "evolved into an open-ended Profession of Everything in a world where technology shades into science, into art, and into management, with no strong institutions to define an overarching mission". Within ICT, H.C. von Baeyer (2003) affirms this status in noting "the frustration of engineers who have at their disposal a variety of methods for measuring the amount of information in a message, but to none deal with its meaning".

Addressing the social dimensions of citizen observatories: The Ground Truth 2.0 socio-technical approach for sustainable implementation of citizen observatories

NASA Astrophysics Data System (ADS)

Wehn, Uta; Joshi, Somya; Pfeiffer, Ellen; Anema, Kim; Gharesifard, Mohammad; Momani, Abeer

2017-04-01

Owing to ICT-enabled citizen observatories, citizens can take on new roles in environmental monitoring, decision making and co-operative planning, and environmental stewardship. And yet implementing advanced citizen observatories for data collection, knowledge exchange and interactions to support policy objectives is neither always easy nor successful, given the required commitment, trust, and data reliability concerns. Many efforts are facing problems with the uptake and sustained engagement by citizens, limited scalability, unclear long-term sustainability and limited actual impact on governance processes. Similarly, to sustain the engagement of decision makers in citizen observatories, mechanisms are required from the start of the initiative in order to have them invest in and, hence, commit to and own the entire process. In order to implement sustainable citizen observatories, these social dimensions therefore need to be soundly managed. We provide empirical evidence of how the social dimensions of citizen observatories are being addressed in the Ground Truth 2.0 project, drawing on a range of relevant social science approaches. This project combines the social dimensions of citizen observatories with enabling technologies - via a socio-technical approach - so that their customisation and deployment is tailored to the envisaged societal and economic impacts of the observatories. The projects consists of the demonstration and validation of six scaled up citizen observatories in real operational conditions both in the EU and in Africa, with a specific focus on flora and fauna as well as water availability and water quality for land and natural resources management. The demonstration cases (4 EU and 2 African) cover the full 'spectrum' of citizen-sensed data usage and citizen engagement, and therefore allow testing and validation of the socio-technical concept for citizen observatories under a range of conditions.

Health care multidisciplinary teams: The sociotechnical approach for an integrated system-wide perspective.

PubMed

Marsilio, Marta; Torbica, Aleksandra; Villa, Stefano

The current literature on the enabling conditions of multidisciplinary teams focuses on the singular dimensions of the organizations (i.e., human resources, clinical pathways, objects) without shedding light on to the way in which these organizational factors interact and mutually influence one another. Drawing on a system perspective of organizations, the authors analyze the organizational patterns that promote and support multidisciplinary teams and how they interrelate and interact to enforce the organization work system. The authors develop a modified sociotechnical system (STS) model to understand how the two dimensions of technical (devices/tools, layout/organization of space, core process standardization) and social (organizational structure, management of human resources and operations) can facilitate the implementation of multidisciplinary teams in health care. The study conducts an empirical analysis based on a sample of hospital adopters of transcatheter aortic valve implantation using the revised STS model. The modified STS model applied to the case studies improves our understanding of the critical implementation factors of a multidisciplinary approach and the importance of coordinating radical changes in the technical and the social subsystems of health care organizations. The analysis informs that the multidisciplinary effort is not a sequential process and that the interplay between the two subsystems needs to be managed efficaciously as an integrated organizational whole to deliver the goals set. Hospital managers must place equal focus on the closely interrelated technical and social dimensions by investing in (a) shared layouts and spaces that cross the boundaries of the specialized health care units, (b) standardization of the core processes through the implementation of local clinical pathways, (c) structured knowledge management mechanisms, (d) the creation of clinical directorates, and (e) the design of a planning and budgeting system that integrates the multidisciplinary concept.

Drawing Inventors

ERIC Educational Resources Information Center

Szekely, George

2012-01-01

Children are drawing inventors. Their art is certainly not what most adults think of as drawing. Almost instinctively, kids know that drawing is everywhere--that they can draw with almost anything, and that innumerable surfaces can be converted for art use. Teaching drawing is showing interest and enthusiasm for kids' drawing inventions--instead…

The Roles of Emotional Comprehension and Representational Drawing Skill in Children's Expressive Drawing

ERIC Educational Resources Information Center

Brechet, Claire; Jolley, Richard P.

2014-01-01

The purpose of the present study was to investigate the roles of emotional comprehension and representational drawing skill in children's expressive drawing. Fifty 7- to 10-year-olds were asked to produce two (happy and sad) expressive drawings, two representational drawings (drawing of a man running and drawing of a house) and to answer the…

Interim Stabilization Equipment Essential and Support Drawing Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

KOCH, M.R.

The purpose of this document is to list the Interim Stabilization equipment drawings that are classified as Essential or Support drawings. Essential Drawings: Those drawings identified by the facility staff as necessary to directly support the safe operation of the facility or equipment. Support Drawings: Those drawings identified by the facility staff that further describe the design details of structures, systems or components shown on essential drawings.

48 CFR 536.570-9 - Shop drawings, coordination drawings, and schedules.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Shop drawings... CONTRACTS Contract Clauses 536.570-9 Shop drawings, coordination drawings, and schedules. Insert the clause at 552.236-78, Shop Drawings, Coordination Drawings, and Schedules, in solicitations and contracts if...

48 CFR 552.236-78 - Shop Drawings, Coordination Drawings, and Schedules.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Shop Drawings... Provisions and Clauses 552.236-78 Shop Drawings, Coordination Drawings, and Schedules. As prescribed in 536.570-9, insert the following clause: Shop Drawings, Coordination Drawings, and Schedules (SEP 1999) The...

48 CFR 536.570-9 - Shop drawings, coordination drawings, and schedules.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Shop drawings... CONTRACTS Contract Clauses 536.570-9 Shop drawings, coordination drawings, and schedules. Insert the clause at 552.236-78, Shop Drawings, Coordination Drawings, and Schedules, in solicitations and contracts if...

48 CFR 536.570-9 - Shop drawings, coordination drawings, and schedules.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Shop drawings... CONTRACTS Contract Clauses 536.570-9 Shop drawings, coordination drawings, and schedules. Insert the clause at 552.236-78, Shop Drawings, Coordination Drawings, and Schedules, in solicitations and contracts if...

48 CFR 536.570-9 - Shop drawings, coordination drawings, and schedules.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Shop drawings... CONTRACTS Contract Clauses 536.570-9 Shop drawings, coordination drawings, and schedules. Insert the clause at 552.236-78, Shop Drawings, Coordination Drawings, and Schedules, in solicitations and contracts if...

48 CFR 552.236-78 - Shop Drawings, Coordination Drawings, and Schedules.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Shop Drawings... Provisions and Clauses 552.236-78 Shop Drawings, Coordination Drawings, and Schedules. As prescribed in 536.570-9, insert the following clause: Shop Drawings, Coordination Drawings, and Schedules (SEP 1999) The...

48 CFR 536.570-9 - Shop drawings, coordination drawings, and schedules.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Shop drawings... CONTRACTS Contract Clauses 536.570-9 Shop drawings, coordination drawings, and schedules. Insert the clause at 552.236-78, Shop Drawings, Coordination Drawings, and Schedules, in solicitations and contracts if...

48 CFR 552.236-78 - Shop Drawings, Coordination Drawings, and Schedules.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Shop Drawings... Provisions and Clauses 552.236-78 Shop Drawings, Coordination Drawings, and Schedules. As prescribed in 536.570-9, insert the following clause: Shop Drawings, Coordination Drawings, and Schedules (SEP 1999) The...

48 CFR 552.236-78 - Shop Drawings, Coordination Drawings, and Schedules.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Shop Drawings... Provisions and Clauses 552.236-78 Shop Drawings, Coordination Drawings, and Schedules. As prescribed in 536.570-9, insert the following clause: Shop Drawings, Coordination Drawings, and Schedules (SEP 1999) The...

48 CFR 552.236-78 - Shop Drawings, Coordination Drawings, and Schedules.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Shop Drawings... Provisions and Clauses 552.236-78 Shop Drawings, Coordination Drawings, and Schedules. As prescribed in 536.570-9, insert the following clause: Shop Drawings, Coordination Drawings, and Schedules (SEP 1999) The...

37 CFR 2.52 - Types of drawings and format for drawings.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Types of drawings and format... OFFICE, DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Drawing § 2.52 Types of drawings and... two types of drawings: (a) Standard character (typed) drawing. Applicants who seek to register words...

Hospitalized children drawing their pain: the contents and cognitive and emotional characteristics of pain drawings.

PubMed

Kortesluoma, Riitta-Liisa; Punamäki, Raija-Leena; Nikkonen, Merja

2008-12-01

Describing pain is difficult. Children like to draw, and through their drawing they reveal worrying issues. This study aimed to examine how hospitalized children express pain through drawings, and was carried out by examining children's thematic drawings of pain. A comparison was made between hospitalized children and healthy control groups with respect to the thematic contents and cognitive and emotional characteristics of pain drawings. The drawings were sorted in categories on the basis of content, and cognitive competence and emotional disturbances by the Draw-a-Person procedure. The hospitalized children showed a lower level of cognitive capacity than their healthy controls. The control group children revealed a higher level of emotional disturbance than the hospitalized children. The groups differed in the contents of their drawings. The drawings of the hospitalized children frequently depicted medical procedures, whereas the drawings of the healthy controls depicted more consoling human and family relations.

Career Profiles- Drawing Controller Kelvin Siu- Operations Engineering Branch

NASA Image and Video Library

2016-06-23

The Drawing Control group provides project support in the form of drafting services, drawing version management, and drawing archival. The office provides drafting services through creation of new drawings and sketches, or integration of red-lines. They maintain physical and electronic storage of flight vehicle drawings, and archive all sketches for the AFRC community. This office is the controlling organization for all Armstrong drawing formats and maintains the drawing numbering system for flight vehicle projects.

Synthetic Biology: Mapping the Scientific Landscape

PubMed Central

Oldham, Paul; Hall, Stephen; Burton, Geoff

2012-01-01

This article uses data from Thomson Reuters Web of Science to map and analyse the scientific landscape for synthetic biology. The article draws on recent advances in data visualisation and analytics with the aim of informing upcoming international policy debates on the governance of synthetic biology by the Subsidiary Body on Scientific, Technical and Technological Advice (SBSTTA) of the United Nations Convention on Biological Diversity. We use mapping techniques to identify how synthetic biology can best be understood and the range of institutions, researchers and funding agencies involved. Debates under the Convention are likely to focus on a possible moratorium on the field release of synthetic organisms, cells or genomes. Based on the empirical evidence we propose that guidance could be provided to funding agencies to respect the letter and spirit of the Convention on Biological Diversity in making research investments. Building on the recommendations of the United States Presidential Commission for the Study of Bioethical Issues we demonstrate that it is possible to promote independent and transparent monitoring of developments in synthetic biology using modern information tools. In particular, public and policy understanding and engagement with synthetic biology can be enhanced through the use of online interactive tools. As a step forward in this process we make existing data on the scientific literature on synthetic biology available in an online interactive workbook so that researchers, policy makers and civil society can explore the data and draw conclusions for themselves. PMID:22539946

Pastoral power and gynaecological examinations: a Foucauldian critique of clinician accounts of patient-centred consent.

PubMed

Cook, Catherine; Brunton, Margaret

2015-05-01

Invasive non-sedated clinical procedures such as gynaecological examinations are normalised; however, there is limited research highlighting the relational and technical skills required for clinicians to ensure patients' continued consent. A considerable body of research emphasises that women dislike examinations, leading to their non-compliance or a delayed follow up for gynaecological and sexual health problems. However, medical research focuses on 'problem' women; the role of clinicians receives limited appraisal. This article draws on interviews with sexual health clinicians in New Zealand, from metropolitan and provincial locations. The gynaecological care of women in New Zealand attained international notoriety with the 1988 publication of Judge Cartwright's inquiry into ethical shortcomings in cervical cancer research at the National Women's Hospital. Judge Cartwright's recommendations included patient-centred care in order to ensure informed consent had been received for clinical procedures and research participation. This article's critical analysis is that, although clinicians' language draws on humanistic notions of patient-centredness, Foucault's notion of secularised pastoral power enables a more nuanced appreciation of the ethical work undertaken by clinicians when carrying out speculum examinations. The analysis highlights both the web of power relations present during examination practices and the strategies clinicians use to negotiate women's continued consent; which is significant because consent is usually conceptualised as an event, rather than an unfolding, unstable process. © 2015 The Authors. Sociology of Health & Illness © 2015 Foundation for the Sociology of Health & Illness/John Wiley & Sons Ltd.

Drawing experts have better visual memory while drawing.

PubMed

Perdreau, Florian; Cavanagh, Patrick

2015-01-01

Drawing involves frequent shifts of gaze between the original and the drawing and visual memory helps compare the original object and the drawing across these gaze shifts while creating and correcting the drawing. It remains unclear whether this memory encodes all of the object or only the features around the current drawing position and whether both the original and the copy are equally well represented. To address these questions, we designed a "drawing" experiment coupled with a change detection task. A polygon was displayed on one screen and participants had to copy it on another, with the original and the drawing presented in alternation. At unpredictable moments during the copying process, modifications were made on the drawing and the original figure (while they were not in view). Participants had to correct their drawing every time they perceived a change so that their drawing always matched the current original figure. Our results show a better memory representation of the original figure than of the drawing, with locations relevant to the current production most accurately represented. Critically, experts showed better memory for both the original and the drawing than did novices, suggesting that experts have specialized advantages for encoding visual shapes.

Decreasing diameter fluctuation of polymer optical fiber with optimized drawing conditions

NASA Astrophysics Data System (ADS)

Çetinkaya, Onur; Wojcik, Grzegorz; Mergo, Pawel

2018-05-01

The diameter fluctuations of poly(methyl methacrylate) based polymer optical fibers, during drawing processes, have been comprehensively studied. In this study, several drawing parameters were selected for investigation; such as drawing tensions, preform diameters, preform feeding speeds, and argon flows. Varied drawing tensions were used to draw fibers, while other parameters were maintained at constant. At a later stage in the process, micro-structured polymer optical fibers were drawn under optimized drawing conditions. Fiber diameter deviations were reduced to 2.2%, when a 0.2 N drawing tension was employed during the drawing process. Higher drawing tensions led to higher diameter fluctuations. The Young’s modulus of fibers drawn with different tensions was also measured. Our results showed that fiber elasticity increased as drawing tensions decreased. The inhomogeneity of fibers was also determined by comparing the deviation of Young’s modulus.

Relationship between directionality and orientation in drawings by young children and adults.

PubMed

Taguchi, Masanori; Noma, Yutaka

2005-08-01

The present study examined the relationship between directionality of drawing movements and the orientation of drawn products in right-handed adults and young children for 27 Japanese kindergartners and 29 Japanese university students who were asked to draw with each hand fishes in side view and circles from several starting points. Significant values of chi2 for distributions of frequencies of orientation of the fish drawings and the direction of circular drawing movement indicated that adult right-handers drawing the fish facing to the left tended to draw a circle clock-wise when they drew with the dominant hand, while there was no such significant relationship in young children's drawings. This result may suggest that the reading and writing habits may be implicated in the direction of drawing movements with the dominant hand, and this directional bias of drawing movement in the dominant hand can appear in the orientation of finished drawings.

48 CFR 52.236-21 - Specifications and Drawings for Construction.

Code of Federal Regulations, 2013 CFR

2013-10-01

... place, that is furnished and installed. (d) Shop drawings means drawings, submitted to the Government by... shop drawings delivered under this contract. (e) If this contract requires shop drawings, the... review. Shop drawings submitted to the Contracting Officer without evidence of the Contractor's approval...

48 CFR 52.236-21 - Specifications and Drawings for Construction.

Code of Federal Regulations, 2014 CFR

2014-10-01

... place, that is furnished and installed. (d) Shop drawings means drawings, submitted to the Government by... shop drawings delivered under this contract. (e) If this contract requires shop drawings, the... review. Shop drawings submitted to the Contracting Officer without evidence of the Contractor's approval...

48 CFR 52.236-21 - Specifications and Drawings for Construction.

Code of Federal Regulations, 2011 CFR

2011-10-01

... place, that is furnished and installed. (d) Shop drawings means drawings, submitted to the Government by... shop drawings delivered under this contract. (e) If this contract requires shop drawings, the... review. Shop drawings submitted to the Contracting Officer without evidence of the Contractor's approval...

48 CFR 52.236-21 - Specifications and Drawings for Construction.

Code of Federal Regulations, 2012 CFR

2012-10-01

... place, that is furnished and installed. (d) Shop drawings means drawings, submitted to the Government by... shop drawings delivered under this contract. (e) If this contract requires shop drawings, the... review. Shop drawings submitted to the Contracting Officer without evidence of the Contractor's approval...

Mixture model normalization for non-targeted gas chromatography/mass spectrometry metabolomics data.

PubMed

Reisetter, Anna C; Muehlbauer, Michael J; Bain, James R; Nodzenski, Michael; Stevens, Robert D; Ilkayeva, Olga; Metzger, Boyd E; Newgard, Christopher B; Lowe, William L; Scholtens, Denise M

2017-02-02

Metabolomics offers a unique integrative perspective for health research, reflecting genetic and environmental contributions to disease-related phenotypes. Identifying robust associations in population-based or large-scale clinical studies demands large numbers of subjects and therefore sample batching for gas-chromatography/mass spectrometry (GC/MS) non-targeted assays. When run over weeks or months, technical noise due to batch and run-order threatens data interpretability. Application of existing normalization methods to metabolomics is challenged by unsatisfied modeling assumptions and, notably, failure to address batch-specific truncation of low abundance compounds. To curtail technical noise and make GC/MS metabolomics data amenable to analyses describing biologically relevant variability, we propose mixture model normalization (mixnorm) that accommodates truncated data and estimates per-metabolite batch and run-order effects using quality control samples. Mixnorm outperforms other approaches across many metrics, including improved correlation of non-targeted and targeted measurements and superior performance when metabolite detectability varies according to batch. For some metrics, particularly when truncation is less frequent for a metabolite, mean centering and median scaling demonstrate comparable performance to mixnorm. When quality control samples are systematically included in batches, mixnorm is uniquely suited to normalizing non-targeted GC/MS metabolomics data due to explicit accommodation of batch effects, run order and varying thresholds of detectability. Especially in large-scale studies, normalization is crucial for drawing accurate conclusions from non-targeted GC/MS metabolomics data.

POLICY ASSESSMENT FOR THE CARBON MONOXIDE ...

EPA Pesticide Factsheets

As part of the NAAQS review process, a Risk/Exposure Assessment (REA) has been developed by OAQPS and has receieved inital review by the Clean Air Scientific Advisory Committee (CASAC). A second review of the REA will be conducted in March 2010. The Policy Assessment for the Carbon monoxide NAAQS Review is being developed and will include summaries of the findings of recent key scientific studies reviewed in the Integrated Science Assessment (ISA), will draw conclusions as to the adequacy of the existing carbon monoxide NAAQS for protection of public health, and will make recommendations regarding revision or reaffirmation of the carbon monoxide NAAQS. This work will be reviewed by the CASAC in March 2010. CASAC provides independent advice to the EPA Administrator on the technical bases for EPA's NAAQS. Presents implications for any needed changes to the carbon monoxide NAAQS, including human health risks and human population exposure associated with the carbon monoxide NAAQS and potential alternative ambient standards. (This work will be reviewed by the Clean Air Scientific Advisory Committee (CASAC). CASAC provides independent advice to the EPA Administrator on the technical bases for EPA's national ambient air quality standards. Established in 1977 under the Clean Air Act (CAA) Amendments of 1977 (see 42 U.S.C. § 7409(d)(2)), CASAC also addresses research related to air quality, sources of air pollution, and the strategies to attain and maintain air quality

The chance of Sweden's public health targets making a difference.

PubMed

Lager, Anton; Guldbrandsson, Karin; Fossum, Bjöörn

2007-03-01

There is a trend in health policy towards more focus on determinants and societal interventions and less on individuals. The Swedish public health targets are in line with this trend. The value of public health targets lies in their ability to function as a tool in governing with targets. This paper examines the possibility of the Swedish targets functioning as such a tool. Document analyses were performed to examine three prerequisites of governing with targets: (1) the influence of the administration in the target setting process, (2) the explicitness of targets and (3) the follow-up system. The material consisted of the documents from the committee drafting the targets, the written opinions on the drafts, and the governmental bill with the adopted public health targets. The administration influenced the target setting process. Further, the government invests in a follow-up system that makes indicators on health determinants visible. However, although there existed explicit targets earlier in the process, the final targets in the bill are not explicit enough. The Swedish public health targets are not explicit enough to function in governing with targets. The reasons for this were political rather than technical. This suggests that policy makers focusing health determinants should not put time and resources in technical target formulating. Instead they could make indicators visible, thereby drawing attention to trends that are political by nature.

Repair and Protection of Small Railway Viaduct with Jammed Span at the Mining Influence

NASA Astrophysics Data System (ADS)

Bętkowski, Piotr

2017-10-01

This paper is about the maintenance of bridge objects on mining areas. Based on several years of observation is shown as functional parameters and technical conditions were deteriorated. As a result of the mining area deformations appeared among others following damages: block of bearings, jam of span, cracks on the abutments. The article describes series of clever maintenance repairs (such as the restoration of displacement freedom on non-standard tangent bearings) which enabled the exploitation of the viaduct without interruptions of railway communication. The region of the bridge is planned to further mining activities, which prejudged, that a repair of the viaduct was necessary to realization. The article discusses the predicted mining area deformation and analyses their influence on the bridge structure. Repair of the viaduct is a comprehensive example of the mining facility protection with the restoration of the expansion joints, bearings replacement, widening benches under bearings, stitching cracks and strengthening abutments, recreating the isolation and the drainage system damaged by mining influences, performance strut in the foundation level. An important element in determining the durability of repair is the selection of appropriate materials and repair technology, which is analysed in the article. All of these tasks completed in less than four months. Article illustrates the photo documentation made before and after repairs and technical drawings that show the range of the repairs.

Computer-based mechanical design of overhead lines

NASA Astrophysics Data System (ADS)

Rusinaru, D.; Bratu, C.; Dinu, R. C.; Manescu, L. G.

2016-02-01

Beside the performance, the safety level according to the actual standards is a compulsory condition for distribution grids’ operation. Some of the measures leading to improvement of the overhead lines reliability ask for installations’ modernization. The constraints imposed to the new lines components refer to the technical aspects as thermal stress or voltage drop, and look for economic efficiency, too. The mechanical sizing of the overhead lines is after all an optimization problem. More precisely, the task in designing of the overhead line profile is to size poles, cross-arms and stays and locate poles along a line route so that the total costs of the line's structure to be minimized and the technical and safety constraints to be fulfilled.The authors present in this paper an application for the Computer-Based Mechanical Design of the Overhead Lines and the features of the corresponding Visual Basic program, adjusted to the distribution lines. The constraints of the optimization problem are adjusted to the existing weather and loading conditions of Romania. The outputs of the software application for mechanical design of overhead lines are: the list of components chosen for the line: poles, cross-arms, stays; the list of conductor tension and forces for each pole, cross-arm and stay for different weather conditions; the line profile drawings.The main features of the mechanical overhead lines design software are interactivity, local optimization function and high-level user-interface

Wilderness medicine

PubMed Central

Sward, Douglas G.; Bennett, Brad L.

2014-01-01

BACKGROUND: Human activity in wilderness areas has increased globally in recent decades, leading to increased risk of injury and illness. Wilderness medicine has developed in response to both need and interest. METHODS: The field of wilderness medicine encompasses many areas of interest. Some focus on special circumstances (such as avalanches) while others have a broader scope (such as trauma care). Several core areas of key interest within wilderness medicine are discussed in this study. RESULTS: Wilderness medicine is characterized by remote and improvised care of patients with routine or exotic illnesses or trauma, limited resources and manpower, and delayed evacuation to definitive care. Wilderness medicine is developing rapidly and draws from the breadth of medical and surgical subspecialties as well as the technical fields of mountaineering, climbing, and diving. Research, epidemiology, and evidence-based guidelines are evolving. A hallmark of this field is injury prevention and risk mitigation. The range of topics encompasses high-altitude cerebral edema, decompression sickness, snake envenomation, lightning injury, extremity trauma, and gastroenteritis. Several professional societies, academic fellowships, and training organizations offer education and resources for laypeople and health care professionals. CONCLUSIONS: The future of wilderness medicine is unfolding on multiple fronts: education, research, training, technology, communications, and environment. Although wilderness medicine research is technically difficult to perform, it is essential to deepening our understanding of the contribution of specific techniques in achieving improvements in clinical outcomes. PMID:25215140

Discerning trends in multiplex immunoassay technology with potential for resource-limited settings.

PubMed

Gordon, Julian; Michel, Gerd

2012-04-01

In the search for more powerful tools for diagnoses of endemic diseases in resource-limited settings, we have been analyzing technologies with potential applicability. Increasingly, the process focuses on readily accessible bodily fluids combined with increasingly powerful multiplex capabilities to unambiguously diagnose a condition without resorting to reliance on a sophisticated reference laboratory. Although these technological advances may well have important implications for the sensitive and specific detection of disease, to date their clinical utility has not been demonstrated, especially in resource-limited settings. Furthermore, many emerging technological developments are in fields of physics or engineering, which are not readily available to or intelligible to clinicians or clinical laboratory scientists. This review provides a look at technology trends that could have applicability to high-sensitivity multiplexed immunoassays in resource-limited settings. Various technologies are explained and assessed according to potential for reaching relevant limits of cost, sensitivity, and multiplex capability. Frequently, such work is reported in technical journals not normally read by clinical scientists, and the authors make enthusiastic claims for the potential of their technology while ignoring potential pitfalls. Thus it is important to draw attention to technical hurdles that authors may not be publicizing. Immunochromatographic assays, optical methods including those involving waveguides, electrochemical methods, magnetorestrictive methods, and field-effect transistor methods based on nanotubes, nanowires, and nanoribbons reveal possibilities as next-generation technologies.

Contributorship and division of labor in knowledge production.

PubMed

Larivière, Vincent; Desrochers, Nadine; Macaluso, Benoît; Mongeon, Philippe; Paul-Hus, Adèle; Sugimoto, Cassidy R

2016-06-01

Scientific authorship has been increasingly complemented with contributorship statements. While such statements are said to ensure more equitable credit and responsibility attribution, they also provide an opportunity to examine the roles and functions that authors play in the construction of knowledge and the relationship between these roles and authorship order. Drawing on a comprehensive and multidisciplinary dataset of 87,002 documents in which contributorship statements are found, this article examines the forms that division of labor takes across disciplines, the relationships between various types of contributions, as well as the relationships between the contribution types and various indicators of authors' seniority. It shows that scientific work is more highly divided in medical disciplines than in mathematics, physics, and disciplines of the social sciences, and that, with the exception of medicine, the writing of the paper is the task most often associated with authorship. The results suggest a clear distinction between contributions that could be labeled as 'technical' and those that could be considered 'conceptual': While conceptual tasks are typically associated with authors with higher seniority, technical tasks are more often performed by younger scholars. Finally, results provide evidence of a U-shaped relationship between extent of contribution and author order: In all disciplines, first and last authors typically contribute to more tasks than middle authors. The paper concludes with a discussion of the implications of the results for the reward system of science.

Health and media: a partnership.

PubMed

Ling, J C

1985-12-01

There has been growing awareness among professionals engaged in marketing and advertising that modern advertising methods can be applied in support of social goals, including health. This has been accompanied by a recognition among health professionals that health is a social phenomenon dependent upon an adequately informed public. However, the health and media sectors have grown apart in past decades. The former tends to be technical and scientific, while the latter is geared to the broadest common denominator of the public. Health professionals often view the mass media with suspicion, and promotion is mistakenly associated with advertising. This paper draws attention to the need for these 2 sectors to work more closely together. Without the involvement of the media, the health sector will not be able to inform the general public on health issues or help stimulate a process of community involvement. Without the technical input of the health sector, the media cannot fulfill their obligation of serving the interests of the public. The role of the media to raise consciousness, stimulate public discussion, articulate public aspirations, disseminate information, and reflect social norms has become established. However, for health practices to be adopted, media input must be complemented by face-to-face communication and should be part of a multifacted program of health services and action. Cooperation between the media and the health sector should be broadened in the years ahead a process that could significantly enhance health and social development.

Beyond Ethical Frameworks: Using Moral Experimentation in the Engineering Ethics Classroom.

PubMed

Walling, Olivia

2015-12-01

Although undergraduate engineering ethics courses often include the development of moral sensitivity as a learning objective and the use of active learning techniques, teaching centers on the transmission of cognitive knowledge. This article describes a complementary assignment asking students to perform an ethics "experiment" on themselves that has a potential to enhance affective learning and moral imagination. The article argues that the focus on cognitive learning may not promote, and may even impair, our efforts to foster moral sensitivity. In contrast, the active learning assignments and exercises, like the ethics "experiment" discussed, offer great potential to expand the scope of instruction in engineering ethics to include ethical behavior as well as knowledge. Engineering ethics education needs to extend beyond the narrow range of human action associated with the technical work of the engineer and explore ways to draw on broader lifeworld experiences to enrich professional practice and identity.

Strategies for dealing with missing data in clinical trials: from design to analysis.

PubMed

Dziura, James D; Post, Lori A; Zhao, Qing; Fu, Zhixuan; Peduzzi, Peter

2013-09-01

Randomized clinical trials are the gold standard for evaluating interventions as randomized assignment equalizes known and unknown characteristics between intervention groups. However, when participants miss visits, the ability to conduct an intent-to-treat analysis and draw conclusions about a causal link is compromised. As guidance to those performing clinical trials, this review is a non-technical overview of the consequences of missing data and a prescription for its treatment beyond the typical analytic approaches to the entire research process. Examples of bias from incorrect analysis with missing data and discussion of the advantages/disadvantages of analytic methods are given. As no single analysis is definitive when missing data occurs, strategies for its prevention throughout the course of a trial are presented. We aim to convey an appreciation for how missing data influences results and an understanding of the need for careful consideration of missing data during the design, planning, conduct, and analytic stages.

Application for certification, 1988 model year light-duty vehicles - Volkswagen, Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems, and exhaust and evaporative emission-control systems. Information is also provided on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the application containsmore » the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification for 1979 model year for light-duty vehicles - Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles or heavy-duty engines submits to EPA an application for certification. The application consists of two parts. In the part I, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. The part I also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements tomore » be followed during testing. The part II application submitted after emission testing is completed, contains the results of emission testing, a statement of compliance to the regulations, and maintenance instructions to be followed by the ultimate owners of the vehicles.« less

Application for certification, 1986 model year light-duty vehicles - Volkswagen/Audi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of the applicationmore » contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Teaching and assessing procedural skills using simulation: metrics and methodology.

PubMed

Lammers, Richard L; Davenport, Moira; Korley, Frederick; Griswold-Theodorson, Sharon; Fitch, Michael T; Narang, Aneesh T; Evans, Leigh V; Gross, Amy; Rodriguez, Elliot; Dodge, Kelly L; Hamann, Cara J; Robey, Walter C

2008-11-01

Simulation allows educators to develop learner-focused training and outcomes-based assessments. However, the effectiveness and validity of simulation-based training in emergency medicine (EM) requires further investigation. Teaching and testing technical skills require methods and assessment instruments that are somewhat different than those used for cognitive or team skills. Drawing from work published by other medical disciplines as well as educational, behavioral, and human factors research, the authors developed six research themes: measurement of procedural skills; development of performance standards; assessment and validation of training methods, simulator models, and assessment tools; optimization of training methods; transfer of skills learned on simulator models to patients; and prevention of skill decay over time. The article reviews relevant and established educational research methodologies and identifies gaps in our knowledge of how physicians learn procedures. The authors present questions requiring further research that, once answered, will advance understanding of simulation-based procedural training and assessment in EM.

"SP.ACE" 2013-2015: ASGARD Balloon and BIFROST Parabolic Flights: Latest Developments in Hands-On Space Education Projects for Secondary School Students

NASA Astrophysics Data System (ADS)

de Schrijver, E.; Chameleva, H.; Degroote, C.; D'Haese, Z.; Paice, C.; Plas, H.; Van den Bossche, A.; Vander Donckt, L.; Vander Vost, J.

2015-09-01

Flight opportunities on high-altitude ASGARD balloons offered to secondary schools worldwide since 20 1 1 have led to an ever more rapidly increasing number of project proposals. The introduction of beginners' and ‘advanced classes of experiments is hoped to draw in even larger numbers of interested school teams. Furthermore, and in cooperation with ESERO (European Space Education Resources Office), workshops and documentation are being prepared to introduce teachers and students alike to the world of microcontrollers and sensors. A student parabolic flight programme called BIFROST (Brussels' Initiative to provide Flight Research Opportunities to STudents) was initiated to meet the rising demand for hands-on space education projects and the desire to cover the widest possible range of scientific and/or technical domains, which essentially calls for a variety of flight platforms: cansats, balloons and parabolic flight.

Embedded system based on PWM control of hydrogen generator with SEPIC converter

NASA Astrophysics Data System (ADS)

Fall, Cheikh; Setiawan, Eko; Habibi, Muhammad Afnan; Hodaka, Ichijo

2017-09-01

The objective of this paper is to design and to produce a micro electrical plant system based on fuel cell for teaching material-embedded systems in technical vocational training center. Based on this, the student can experience generating hydrogen by fuel cells, controlling the rate of hydrogen generation by the duty ration of single-ended primary-inductor converter(SEPIC), drawing the curve rate of hydrogen to duty ratio, generating electrical power by using hydrogen, and calculating the fuel cell efficiency when it is used as electrical energy generator. This project is of great importance insofar as students will need to acquire several skills to be able to realize it such as continuous DC DC conversion and the scientific concept behind the converter, the regulation of systems with integral proportional controllers, the installation of photovoltaic cells, the use of high-tech sensors, microcontroller programming, object-oriented programming, mastery of the fuel cell syste

Apport de l'analyse colorimétrique à propos de la caractérisation in situ des peintures préhistoriques dans une démarche conservatoire: cas de la grotte Chauvet (Ardèche, France)Contribution of in situ colorimetric determination for the characterisation of the prehistorical paintings before the elaboration of a conservation process: the case of the Chauvet cave (Ardèche, France).

NASA Astrophysics Data System (ADS)

Vouvé, Jean; Vouvé, Florence; Brunet, Jacques; Malaurent, Philippe

2000-11-01

In situ colorimetric determination is a useful quantitative and non-destructive contribution for the characterisation of organic and mineral pigments. It is in accordance with regard to the administrative instructions, which privilege the maximal conservation to secure the integrity of art discovered recently in this extraordinary prehistorical sanctuary. This determination connected with technical statements of archaeologists, help us to understand that many red hand paintings drawn with the palm of the right hand of a man and of a woman or adolescent, were made from one unique paint pot and the mode of retouch of black charcoal drawings.

Solar heating and cooling system for an office building at Reedy Creek Utilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-08-01

This final report describes in detail the solar energy system installed in a new two-story office building at the Reedy Creek Utilities Company, which provides utility service to Walt Disney World at Lake Buena Vista, Florida. The solar components were partly funded by the Department of Energy under Contract EX-76-C-01-2401, and the technical management was by NASA/George C. Marshall Space Flight Center. The solar energy system application is 100 percent heating, 80 percent cooling, and 100 percent hot water. The collector is a modular cylindrical concentrator type with an area of 3.840 square feet. The storage medium is water withmore » a capacity of 10,000 gallons hot and 10,000 gallons chilled. Design, construction, operation, cost, maintenance, and performance are described in depth. Detailed drawings are included.« less

Makers of Modern Science. Volume 9, Linus Pauling: Scientist and Advocate by David E. Newton

NASA Astrophysics Data System (ADS)

Kauffman, George B.; Kauffman, Laurie M.

1997-04-01

Facts on File: New York, 1994. 136 pp. Figs. and photos. 15.0 x 22.6 cm. $16.95 Makers of Modern Science, a series of biographies (available on standing order at a 20% discount), explores the lives and achievements of scientists who have made the greatest contributions to human knowledge during the 19th and 20th centuries. Each scientist's achievements, including underlying scientific principles, are discussed simply and clearly and are free of technical jargon. Drawing on primary sources such as diaries, memoirs, letters, and contemporary news stories, as well as secondary sources, each volume depicts the human drama of scientific work, the excitement and frustration of research, and the exhilaration and rewards of discovery. Each book, which includes black-and-white photographs, diagrams, an annotated bibliography, and a detailed index, contains a final chapter summarizing the legacy of the scientist's achievements.

A Typology of ICU Patients and Families from the Clinician Perspective: Toward Improving Communication.

PubMed

Leslie, Myles; Paradis, Elise; Gropper, Michael A; Milic, Michelle M; Kitto, Simon; Reeves, Scott; Pronovost, Peter

2017-06-01

This paper presents an exploratory case study of clinician-patient communications in a specific clinical environment. It describes how intensive care unit (ICU) clinicians' technical and social categorizations of patients and families shape the flow of communication in these acute care settings. Drawing on evidence from a year-long ethnographic study of four ICUs, we develop a typology of patients and families as viewed by the clinicians who care for them. Each type, or category, of patient is associated with differing communication strategies, with compliant patients and families engaged in greater depth. In an era that prioritizes patient engagement through communication for all patients, our findings suggest that ICU teams need to develop new strategies for engaging and communicating with not just compliant patients and families, but those who are difficult as well. We discuss innovative methods for developing such strategies.

Application for certification, 1993 model-year light-duty trucks - Grumman Olson

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-01-01

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. The report deals with light-duty trucks from Grumman Olson Company. In the application, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirementsmore » to be followed during testing. Section 16 of the application contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

Application for certification, 1992 model-year light-duty vehicles - Grumman Olson

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-01-01

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles, or heavy-duty engines submits to EPA an application for certification. In the application, the manufacturer gives a detailed technical description of the vehicles or engines that he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. It also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements to be followed during testing. Section 16 of themore » application contains the results of emission testing, a statement of compliance to the regulations, production engine parameters, and a Summary Sheet Input Form on which issuance of a Certificate of Conformity is based.« less

A Multidimensional View of Personal Health Systems for Underserved Populations

PubMed Central

Botts, Nathan E; Burkhard, Richard J

2010-01-01

The advent of electronic personal health records (PHR) provides a major opportunity to encourage positive health management practices, such as chronic disease management. Yet, to date there has been little attention toward the use of PHRs where advanced health information services are perhaps most needed, namely, in underserved communities. Drawing upon research conducted with safety net providers and patients, the authors propose a multi-level analytical framework for guiding actions aimed at fostering PHR adoption and utilization. The authors first outline distinctive user and technical requirements that need to be considered. Next, they assess organizational requirements necessary to implement PHRs within health systems bound by limited resources. Finally, the authors analyze the overriding health care policy context that can facilitate or thwart such efforts. The conclusion notes that heightened national attention toward health information technology and reform provides a significant opportunity for initiatives whose goal is to increase widepread access to PHRs. PMID:20685644

Application for certification for 1979 model year for light-duty vehicles - Peugeot

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Every year, each manufacturer of passenger cars, light-duty trucks, motorcycles or heavy-duty engines submits to EPA an application for certification. The application consists of two parts. In the part I, the manufacturer gives a detailed technical description of the vehicles or engines he intends to market during the upcoming model year. These engineering data include explanations and/or drawings which describe engine/vehicle parameters such as basic engine design, fuel systems, ignition systems and exhaust and evaporative emission control systems. The part I also provides information on emission test procedures, service accumulation procedures, fuels to be used, and proposed maintenance requirements tomore » be followed during testing. The part II application, submitted after emission testing is completed, contains the results of emission testing, a statement of compliance to the regulations, and maintenance instructions to be followed by the ultimate owners of the vehicles.« less

Justifying an ideal first pregnancy age: Vernacular science knowledge and the facilitation of lay argument.

PubMed

Jensen, Robin E; Blumling, Allison N

2018-04-01

Members of the lay public often draw from vernacular science knowledge-or metaphors, images, and terms related to technical science-to make normative assessments about behavior. Yet, little is known about vernacular science knowledge in terms of its forms and functions. In a national survey, US adults ( N = 688) were asked to identify an ideal age for first pregnancy, and to explain their decision. Participants drew from arguments related to hormonal processes, the language of risk, and the quality and quantity of "eggs" to navigate and identify an ideal timeline for first pregnancy. Their responses illustrated patterns of justification that involved the (a) employment of scientific concepts as heuristic cues for critical analysis, (b) conflation of details, and (c) synecdochal explication. These findings reveal some of the key ways in which vernacular science knowledge may shape the trajectory of lay argument in a range of contexts.

Fiber optic combiner and duplicator

NASA Technical Reports Server (NTRS)

1979-01-01

The investigation of the possible development of two optical devices, one to take two images as inputs and to present their arithmetic sum as a single output, the other to take one image as input and present two identical images as outputs is described. Significant engineering time was invested in establishing precision fiber optics drawing capabilities, real time monitoring of the fiber size and exact measuring of fiber optics ribbons. Various assembly procedures and tooling designs were investigated and prototype models were built and evaluated that established technical assurance that the device was feasible and could be fabricated. Although the interleaver specification in its entirety was not achieved, the techniques developed in the course of the program improved the quality of images transmitted by fiber optic arrays by at least an order of magnitude. These techniques are already being applied to the manufacture of precise fiber optic components.

Exploring host–microbiota interactions in animal models and humans

PubMed Central

Kostic, Aleksandar D.; Howitt, Michael R.; Garrett, Wendy S.

2013-01-01

The animal and bacterial kingdoms have coevolved and coadapted in response to environmental selective pressures over hundreds of millions of years. The meta'omics revolution in both sequencing and its analytic pipelines is fostering an explosion of interest in how the gut microbiome impacts physiology and propensity to disease. Gut microbiome studies are inherently interdisciplinary, drawing on approaches and technical skill sets from the biomedical sciences, ecology, and computational biology. Central to unraveling the complex biology of environment, genetics, and microbiome interaction in human health and disease is a deeper understanding of the symbiosis between animals and bacteria. Experimental model systems, including mice, fish, insects, and the Hawaiian bobtail squid, continue to provide critical insight into how host–microbiota homeostasis is constructed and maintained. Here we consider how model systems are influencing current understanding of host–microbiota interactions and explore recent human microbiome studies. PMID:23592793

Ethics Regulation in Social Computing Research: Examining the Role of Institutional Review Boards.

PubMed

Vitak, Jessica; Proferes, Nicholas; Shilton, Katie; Ashktorab, Zahra

2017-12-01

The parallel rise of pervasive data collection platforms and computational methods for collecting, analyzing, and drawing inferences from large quantities of user data has advanced social computing research, investigating digital traces to understand mediated behaviors of individuals, groups, and societies. At the same time, methods employed to access these data have raised questions about ethical research practices. This article provides insights into U.S. institutional review boards' (IRBs) attitudes and practices regulating social computing research. Through descriptive and inferential analysis of survey data from staff at 59 IRBs at research universities, we examine how IRBs evaluate the growing variety of studies using pervasive digital data. Findings unpack the difficulties IRB staff face evaluating increasingly technical research proposals while highlighting the belief in their ability to surmount these difficulties. They also indicate a lack of consensus among IRB staff about what should be reviewed and a willingness to work closely with researchers.

Numerical modeling of cold room's hinged door opening and closing processes

NASA Astrophysics Data System (ADS)

Carneiro, R.; Gaspar, P. D.; Silva, P. D.; Domingues, L. C.

2016-06-01

The need of rationalize energy consumption in agrifood industry has fasten the development of methodologies to improve the thermal and energy performances of cold rooms. This paper presents a three-dimensional (3D) transient Computational Fluid Dynamics (CFD) modelling of a cold room to evaluate the air infiltration rate through hinged doors. A species transport model is used for modelling the tracer gas concentration decay technique. Numerical predictions indicate that air temperature difference between spaces affects the air infiltration. For this case study, the infiltration rate increases 0.016 m3 s-1 per K of air temperature difference. The knowledge about the evolution of air infiltration during door opening/closing times allows to draw some conclusions about its influence on the air conditions inside the cold room, as well as to suggest best practices and simple technical improvements that can minimize air infiltration, and consequently improve thermal performance and energy consumption rationalization.

The role of agriculture in the nutrition of children.

PubMed

Blackie, Malcolm

2014-11-01

Data from across the developing world show consistently that a fundamental cause of poor nutrition is low agricultural productivity and consequent low incomes, especially amongst poor rural households. Conventionally, technical solutions have been sought to contribute to greater household food security, and thus better childhood nutrition. A more holistic approach is required. This paper draws from field examples, mainly in southern and east Africa, to illustrate the implementation and effectiveness of what is termed a 'green evolution' approach which emphasizes the efficient use of available resources of land, labour and inputs, thus allowing food to be sold profitably at low prices. With low food prices, the poor can use their limited funds to invest in better housing, education and health care. This is achieved through building thoughtful, farmer demand-led initiatives, backed by high quality science to deliver widespread improvements in nutrition for the poor.

On the post mitigation impact risk assessment of possible targets for an asteroid deflection demonstration mission in the NEOShield project.

NASA Astrophysics Data System (ADS)

Eggl, Siegfried

2014-05-01

Mankind believes to have the capabilities to avert potentially disastrous asteroid impacts. Yet, only the realization of a mitigation demonstration mission can confirm such a claim. The NEOShield project, an international collaboration under European leadership, aims to draw a comprehensive picture of the scientific as well as technical requirements to such an endeavor. One of the top priorities of such a demonstration mission is, of course, that a previously harmless target asteroid shall not be turned into a potentially hazardous object. Given the inherently large uncertainties in an asteroid's physical parameters, as well as the additional uncertainties introduced during the deflection attempt, an in depth analysis of the change in asteroid impact probabilities after a deflection event becomes necessary. We present a post mitigation impact risk analysis of a list of potential deflection test missions and discuss the influence of orbital, physical and mitigation induced uncertainties.

Assessing security technology's impact: old tools for new problems.

PubMed

Kreissl, Reinhard

2014-09-01

The general idea developed in this paper from a sociological perspective is that some of the foundational categories on which the debate about privacy, security and technology rests are blurring. This process is a consequence of a blurring of physical and digital worlds. In order to define limits for legitimate use of intrusive digital technologies, one has to refer to binary distinctions such as private versus public, human versus technical, security versus insecurity to draw differences determining limits for the use of surveillance technologies. These distinctions developed in the physical world and are rooted in a cultural understanding of pre-digital culture. Attempts to capture the problems emerging with the implementation of security technologies using legal reasoning encounter a number of problems since law is by definition oriented backwards, adapting new developments to existing traditions, whereas the intrusion of new technologies in the physical world produces changes and creates fundamentally new problems.

Engineering model system study for a regenerative fuel cell: Study report

NASA Technical Reports Server (NTRS)

Chang, B. J.; Schubert, F. H.; Kovach, A. J.; Wynveen, R. A.

1984-01-01

Key design issues of the regenerative fuel cell system concept were studied and a design definition of an alkaline electrolyte based engineering model system or low Earth orbit missions was completed. Definition of key design issues for a regenerative fuel cell system include gaseous reactant storage, shared heat exchangers and high pressure pumps. A power flow diagram for the 75 kW initial space station and the impact of different regenerative fuel cell modular sizes on the total 5 year to orbit weight and volume are determined. System characteristics, an isometric drawing, component sizes and mass and energy balances are determined for the 10 kW engineering model system. An open loop regenerative fuel cell concept is considered for integration of the energy storage system with the life support system of the space station. Technical problems and their solutions, pacing technologies and required developments and demonstrations for the regenerative fuel cell system are defined.

Modelers and policymakers : improving the relationships.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karas, Thomas H.

2004-06-01

On April 22 and 23, 2004, a diverse group of 14 policymakers, modelers, analysts, and scholars met with some 22 members of the Sandia National Laboratories staff to explores ways in which the relationships between modelers and policymakers in the energy and environment fields (with an emphasis on energy) could be made more productive for both. This report is not a transcription of that workshop, but draws very heavily on its proceedings. It first describes the concept of modeling, the varying ways in which models are used to support policymaking, and the institutional context for those uses. It then proposesmore » that the goal of modelers and policymakers should be a relationship of mutual trust, built on a foundation of communication, supported by the twin pillars of policy relevance and technical credibility. The report suggests 20 guidelines to help modelers improve the relationship, followed by 10 guidelines to help policymakers toward the same goal.« less

Gendered knowledge and adaptive practices: Differentiation and change in Mwanga District, Tanzania.

PubMed

Smucker, Thomas A; Wangui, Elizabeth Edna

2016-12-01

We examine the wider social knowledge domain that complements technical and environmental knowledge in enabling adaptive practices through two case studies in Tanzania. We are concerned with knowledge production that is shaped by gendered exclusion from the main thrusts of planned adaptation, in the practice of irrigation in a dryland village and the adoption of fast-maturing seed varieties in a highland village. The findings draw on data from a household survey, community workshops, and key informant interviews. The largest challenge to effective adaptation is a lack of access to the social networks and institutions that allocate resources needed for adaptation. Results demonstrate the social differentiation of local knowledge, and how it is entwined with adaptive practices that emerge in relation to gendered mechanisms of access. We conclude that community-based adaptation can learn from engaging the broader social knowledge base in evaluating priorities for coping with greater climate variability.

Finding the truth in the noise - potentials and limitations of big ecological datasets for new knowledge generation

NASA Astrophysics Data System (ADS)

Kutsch, Werner Leo

2016-04-01

Nowadays,technical possibilities in Earth Observation provide enormous amounts of data that open great possibilities to review existing ecological theories and develop new ones. Several examples for that are shown in the presentation in order to discuss potentials and limitations of the underlying concepts and provide feedback to large infrastructures carrying out ecological observations or experiments. Since different ecological questions or theoretical approaches require different methods, data interoperability and co-location are practical challenges. Nevertheless, we also have to learn that not every method is applicable in all ecosystems and that data have to be critically scrutinized before being sure that we can really draw ecological conclusions. This is time consuming and very often frustrating since we may learn that we have sometimes invested lots of work and money for building infrastructure at a site that is not suitable for the method.

Operational and maintenance instruction manual for the Ingham County Geriatric Medical Care Facility solar water-heating system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Ingham County solar system consists of approximately 10,000 square feet of solar collectors connected in a closed configuration loop. The primary loop solution is a 1:12 mixture of water and propylene glycol which flows through the tube side of a heat exchanger connected to the primary storage tank. The heat energy which is supplied to the primary storage tank is subsequently used to preheat the temperature of the laundry water, kitchen water, and domestic potable water. Included in this report are: detailed drawings and flow chart; operational methodology; preventive maintenance instructions; general instructions and safety precautions; and a correctivemore » maintenance and tabulation of failure modes. Appendices include: manufacturers technical manual and component specifications; IBM data sensors and responsibilities; digital county monitor operations manual; and on site monitor operations manual. Reference CAPE-2834. (LS)« less

Encountering Drawing

ERIC Educational Resources Information Center

Gregory, Nuala

2017-01-01

This article divides into two roughly equal parts, both of which aim to address the "act" rather than the "art" of drawing. The second part focuses on a theoretical discussion of drawing. The first bears on a number of themes including the role of drawing in colonial history, drawing and data collection, and drawing and memory.…

48 CFR 1952.227-77 - Rights in shop drawings.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Rights in shop drawings... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop Drawings (FEB 1985) (a) Shop drawings for construction means drawings, submitted to the Government by the...

48 CFR 1952.227-77 - Rights in shop drawings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Rights in shop drawings... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop Drawings (FEB 1985) (a) Shop drawings for construction means drawings, submitted to the Government by the...

48 CFR 1952.227-77 - Rights in shop drawings.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Rights in shop drawings... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop Drawings (FEB 1985) (a) Shop drawings for construction means drawings, submitted to the Government by the...

48 CFR 1952.227-77 - Rights in shop drawings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Rights in shop drawings... Rights in shop drawings. As prescribed in 1927.405(h), insert the following clause: Rights in Shop Drawings (FEB 1985) (a) Shop drawings for construction means drawings, submitted to the Government by the...

13. Photocopy of engineering drawing (original drawing,(original drawing, #MH 10460086, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Photocopy of engineering drawing (original drawing,(original drawing, #MH 104-600-86, dated October 31, 1995, and drawn by W. Robinson, is located in the Mountain Home Air Force Base Civil Engineering archives. This 1995 drawing is a copy of drawing #MH 104-600-06, dated December 21, 1955, entitled "Repair Exterior Siding Elev. & Exterior Painting. Bldg. 611," also located in the Mountain Home Air Force Base Civil Engineering archives). FAC 611. - Mountain Home Air Force Base, Base Chapel, 350 Willow Street, Cantonment Area, Mountain Home, Elmore County, ID

Drawing-to-Learn: A Framework for Using Drawings to Promote Model-Based Reasoning in Biology

PubMed Central

Quillin, Kim; Thomas, Stephen

2015-01-01

The drawing of visual representations is important for learners and scientists alike, such as the drawing of models to enable visual model-based reasoning. Yet few biology instructors recognize drawing as a teachable science process skill, as reflected by its absence in the Vision and Change report’s Modeling and Simulation core competency. Further, the diffuse research on drawing can be difficult to access, synthesize, and apply to classroom practice. We have created a framework of drawing-to-learn that defines drawing, categorizes the reasons for using drawing in the biology classroom, and outlines a number of interventions that can help instructors create an environment conducive to student drawing in general and visual model-based reasoning in particular. The suggested interventions are organized to address elements of affect, visual literacy, and visual model-based reasoning, with specific examples cited for each. Further, a Blooming tool for drawing exercises is provided, as are suggestions to help instructors address possible barriers to implementing and assessing drawing-to-learn in the classroom. Overall, the goal of the framework is to increase the visibility of drawing as a skill in biology and to promote the research and implementation of best practices. PMID:25713094

The effect of three different educational approaches on children's drawing ability: Steiner, Montessori and traditional.

PubMed

Cox, M V; Rowlands, A

2000-12-01

Although there is a national curriculum for art education in the UK there are also alternative approaches in the private sector. This paper addresses the issue of the effect of these approaches on children's drawing ability. To compare the drawing ability in three drawing tasks of children in Steiner, Montessori and traditional schools. The participants were 60 school children between the ages of 5;11 and 7;2. Twenty children were tested in each type of school. Each child completed three drawings: a free drawing, a scene and an observational drawing. As predicted, the free and scene drawings of children in the Steiner school were rated more highly than those of children in Montessori and traditional schools. Steiner children's use of colour was also rated more highly, although they did not use more colours than the other children. Steiner children used significantly more fantasy topics in their free drawings. Further observation indicated that the Steiner children were better at using the whole page and organising their drawings into a scene; their drawings were also more detailed. Contrary to previous research Montessori children did not draw more inanimate objects and geometrical shapes or fewer people than other children. Also, contrary to the prediction, Steiner children were significantly better rather than worse than other children at observational drawing. The results suggest that the approach to art education in Steiner schools is conducive not only to more highly rated imaginative drawings in terms of general drawing ability and use of colour but also to more accurate and detailed observational drawings.

Evidence of Diplopia in Children's Headache Drawings Helps to Differentiate Pseudotumor Cerebri From Migraine.

PubMed

Lee, Erica B; Edelman, Fredrick S; Stafstrom, Carl E

2018-02-01

This study aimed to determine whether children's headache drawings can distinguish between pseudotumor cerebri and migraine. Headache features associated with pseudotumor cerebri (pseudotumor; idiopathic intracranial hypertension) are nonspecific and are difficult to distinguish clinically from migraines. Children's headache drawings have a high predictive value for migraine versus nonmigraine headaches. We hypothesized that drawings could help to differentiate pediatric headaches due to pseudotumor cerebri from those associated with migraines. Children aged six to 18 years old attending university hospital pediatric neurology clinics were asked to draw a picture of how their headache feels. From our database of children's headache drawings, pictures by children with clinically diagnosed pseudotumor were compared with migraine drawings. Headache drawings of 21 children (16 females) with pseudotumor were compared with those of 518 children with migraine. Pseudotumor drawings depicted a variety of symptoms including pounding pain (n = 11), pressure-like pain (n = 3), photophobia (3), dizziness (1), and recumbency (1). Severe pain indicators included hammers, bombs, anvil, and vise grip. Positive visual phenomena included scintillations, scotomata, or blurring (n = 8). Negative visual phenomena included field defects (n = 2). Pseudotumor drawings were similar to migraine drawings except that 6 of 21 pseudotumor drawings (28.6%) depicted diplopia (crossed eyes, double images), whereas only three of 518 migraine drawings (0.6%) depicted diplopia (P < 0.000001). Diplopia was depicted in a significantly higher percentage of pseudotumor drawings than migraine drawings. In all other respects, headache drawings by children with pseudotumor cerebri were similar to those drawn by children with migraine. Copyright © 2017 Elsevier Inc. All rights reserved.

From LDEF to a national Space Environment and Effects (SEE) program: A natural progression

NASA Technical Reports Server (NTRS)

Bowles, David E.; Calloway, Robert L.; Funk, Joan G.; Kinard, William H.; Levine, Arlene S.

1995-01-01

As the LDEF program draws to a close, it leaves in place the fundamental building blocks for a Space Environment and Effects (SEE) program. Results from LDEF data analyses and investigations now form a substantial core of knowledge on the long term effects of the space environment on materials, system and structures. In addition, these investigations form the basic structure of a critically-needed SEE archive and database system. An agency-wide effort is required to capture all elements of a SEE program to provide a more comprehensive and focused approach to understanding the space environment, determining the best techniques for both flight and ground-based experimentation, updating the models which predict both the environments and those effects on subsystems and spacecraft, and, finally, ensuring that this multitudinous information is properly maintained, and inserted into spacecraft design programs. Many parts and pieces of a SEE program already exist at various locations to fulfill specific needs. The primary purpose of this program, under the direction of the Office of Advanced Concepts and Technology (OACT) in NASA Headquarters, is to take advantage of these parts; apply synergisms where possible; identify and when possible fill-in gaps; coordinate and advocate a comprehensive SEE program. The SEE program must coordinate and support the efforts of well-established technical communities wherein the bulk of the work will continue to be done. The SEE program will consist of a NASA-led SEE Steering Committee, consisting of government and industry users, with the responsibility for coordination between technology developers and NASA customers; and Technical Working Groups with primary responsibility for program technical content in response to user needs. The Technical Working Groups are as follows: Materials and Processes; Plasma and Fields; Ionizing Radiation; Meteoroids and Orbital Debris; Neutral External Contamination; Thermosphere, Thermal, and Solar Conditions; Electromagnetic Effects; Integrated Assessments and Databases. Specific technology development tasks will be solicited through a NASA Research Announcement to be released in May of 1994. The areas in which tasks are solicited include: (1) engineering environment definitions, (2) environments and effects design guidelines, (3) environments and effects assessment models and databases, and (4) flight/ground simulation/technology assessment data.

Influence of Psychological Factors on Product Development. Lessons from Aerospace and other Industries

NASA Astrophysics Data System (ADS)

Kamata, E. S.

2002-10-01

Product development is a major determinant of quality and cost as companies throughout the world struggle to optimize product development processes. Engineering tasks are usually implicitly assumed to be a primarily technical activity, but in reality they feature numerous nontechnical factors as well. This book focuses on the interrelationships of social, technical, and organizational aspects of the product development process. Cases observed in industry and research laboratories are presented and interpreted based on the socio-technical system approach (Emery / Trist) of examining the reciprocal relationship between the technical and the social subsystems. This book is primarily intended for engineering and quality professionals who want to know the limitations of current methods used in product development, to examine the so-called soft factors by means of grounded studies of their effect on R&D performance, not only to acknowledge the influence of soft factors but to actively consider their potential to improve the work environment. Academic researchers of the topic will also find many references and material for advanced courses on project and quality management. In addition to numerous cases from the aerospace industry, its general solution concepts are generalizable to other industries in which the high degree of product complexity necessitates effective interaction among different disciplines. The historical evaluation is neither intended for introductory purposes nor to propose a return to the past, but as a survey of the relevant factors to be applied in present and future projects. The author holds a degree in Electronics Engineering from the Instituto Tecnológico de Aeronautica, Brazil, as well as a PhD in Administration Sciences from the Swiss Federal Institute of Technology in Zurich, Switzerland. He draws on profound academic research as well as a wealth of practical experience in avionics, telecommunications, systems control, and the space industry. His professional biography includes activities in development, quality of development, reliability, testability and university lecturing. He also holds a commercial pilot license. Link: http://www.wkap.nl/prod/b/1-4020-0807-4

From LDEF to a national Space Environment and Effects (SEE) program: A natural progression

NASA Astrophysics Data System (ADS)

Bowles, David E.; Calloway, Robert L.; Funk, Joan G.; Kinard, William H.; Levine, Arlene S.

1995-02-01

As the LDEF program draws to a close, it leaves in place the fundamental building blocks for a Space Environment and Effects (SEE) program. Results from LDEF data analyses and investigations now form a substantial core of knowledge on the long term effects of the space environment on materials, system and structures. In addition, these investigations form the basic structure of a critically-needed SEE archive and database system. An agency-wide effort is required to capture all elements of a SEE program to provide a more comprehensive and focused approach to understanding the space environment, determining the best techniques for both flight and ground-based experimentation, updating the models which predict both the environments and those effects on subsystems and spacecraft, and, finally, ensuring that this multitudinous information is properly maintained, and inserted into spacecraft design programs. Many parts and pieces of a SEE program already exist at various locations to fulfill specific needs. The primary purpose of this program, under the direction of the Office of Advanced Concepts and Technology (OACT) in NASA Headquarters, is to take advantage of these parts; apply synergisms where possible; identify and when possible fill-in gaps; coordinate and advocate a comprehensive SEE program. The SEE program must coordinate and support the efforts of well-established technical communities wherein the bulk of the work will continue to be done. The SEE program will consist of a NASA-led SEE Steering Committee, consisting of government and industry users, with the responsibility for coordination between technology developers and NASA customers; and Technical Working Groups with primary responsibility for program technical content in response to user needs. The Technical Working Groups are as follows: Materials and Processes; Plasma and Fields; Ionizing Radiation; Meteoroids and Orbital Debris; Neutral External Contamination; Thermosphere, Thermal, and Solar Conditions; Electromagnetic Effects; Integrated Assessments and Databases. Specific technology development tasks will be solicited through a NASA Research Announcement to be released in May of 1994. The areas in which tasks are solicited include: (1) engineering environment definitions, (2) environments and effects design guidelines, (3) environments and effects assessment models and databases, and (4) flight/ground simulation/technology assessment data.

37 CFR 1.152 - Design drawings.

Code of Federal Regulations, 2012 CFR

2012-07-01

... are not permitted in a design drawing. Photographs and ink drawings are not permitted to be combined as formal drawings in one application. Photographs submitted in lieu of ink drawings in design patent...

37 CFR 1.152 - Design drawings.

Code of Federal Regulations, 2014 CFR

2014-07-01

... are not permitted in a design drawing. Photographs and ink drawings are not permitted to be combined as formal drawings in one application. Photographs submitted in lieu of ink drawings in design patent...

Quality of Drawing as a Factor in the Interpretation of Figure Drawings.

ERIC Educational Resources Information Center

Johnson, Frank A.; Greenberg, Roger P.

1978-01-01

The drawings of 32 poliomyelitis patients and their matched controls were examined to see whether figure drawings primarily reflect the subject's projection of psychological state, ability to draw, or some combination of these two factors. Quality of drawing may at times be the overwhelming determinant of clinical and research findings.…

Making Sense of Children's Drawings

ERIC Educational Resources Information Center

Anning, Angela; Ring, Kathy

2004-01-01

This book explores how young children learn to draw and draw to learn, at home and school. It provides support for practitioners in developing a pedagogy of drawing in Art and Design and across the curriculum and provide advice for parents about how to make sense of their children's drawings. This book is enlivened with the real drawings of seven…

Engaging Organic Chemistry Students Using ChemDraw for iPad

ERIC Educational Resources Information Center

Morsch, Layne A.; Lewis, Michael

2015-01-01

Drawing structures, mechanisms, and syntheses is a vital part of success in organic chemistry courses. ChemDraw for iPad has been used to increase classroom experiences in the preparation of high quality chemical drawings. The embedded Flick-to-Share allows for simple, real-time exchange of ChemDraw documents. ChemDraw for iPad also allows…

Lung sounds: how doctors draw crackles and wheeze.

PubMed

Scott, Gregory; Presswood, Edward J; Makubate, Boikanyo; Cross, Frank

2013-12-01

The content of medical records is a potential source of miscommunication between clinicians. Doctors' written entries have been criticised for their illegibility and ambiguity, but no studies have examined doctors' drawings that are commonly used for recording auscultation findings. To compare doctors' drawings of auscultation findings, based on identical clinical information. Doctors at the Royal London Hospital and a group of London based general practitioners (GPs) documented a respiratory examination with a drawing of the auscultation findings of bilateral mid and lower zone wheeze and right lower zone crackles. The graphical properties of each drawing were examined and the use of written captions and labels recorded. Drawings were classified into styles according to the use of symbols (defined as discrete characters or icons) and shading (cross-hatching, speckling or darkening) to depict the auscultation findings. The study was conducted between September and November 2011. Sixty-nine hospital doctors and 13 GPs participated. Ten drawing styles were identified from 78 completed drawings. Ten distinct symbols and a range of shading techniques were used. The most frequent style (21% of drawings) combined 'X' symbols representing crackles with musical notes for wheeze. There was inconsistency of representation across the drawings. Forty-seven (60%) drawings used an 'X' symbol exclusively to represent crackles, but six (8%) used 'X' only to represent wheeze, and 10 (13%) used 'X' to represent both findings. 91% of participants included captions or labels with their drawing. There was wide variation in doctors' drawings of identical auscultation findings, and inconsistency in the meaning of symbols both between and within drawings. Doctors risk incorrectly interpreting each other's drawings when they are not effectively labelled. We recommend doctors consider using a written description instead, or draw different findings with distinct symbols or shading, labelling all findings clearly.

Drawing conclusions: The effect of instructions on children's confabulation and fantasy errors.

PubMed

Macleod, Emily; Gross, Julien; Hayne, Harlene

2016-01-01

Drawing is commonly used in forensic and clinical interviews with children. In these interviews, children are often allowed to draw without specific instructions about the purpose of the drawing materials. Here, we examined whether this practice influenced the accuracy of children's reports. Seventy-four 5- and 6-year-old children were interviewed one to two days after they took part in an interactive event. Some children were given drawing materials to use during the interview. Of these children, some were instructed to draw about the event, and some were given no additional instructions at all. Children who were instructed to draw about the event, or who were interviewed without drawing, made few errors. In contrast, children who drew without being given specific instructions reported more errors that were associated with both confabulation and fantasy. We conclude that, to maximise accuracy during interviews involving drawing, children should be directed to draw specifically about the interview topic.

Recognition and use of line drawings by children with severe intellectual disabilities: the effects of color and outline shape.

PubMed

Stephenson, Jennifer

2009-03-01

Communication symbols for students with severe intellectual disabilities often take the form of computer-generated line drawings. This study investigated the effects of the match between color and shape of line drawings and the objects they represented on drawing recognition and use. The match or non-match between color and shape of the objects and drawings did not have an effect on participants' ability to match drawings to objects, or to use drawings to make choices.

Comfort drawing during investigative interviews: evidence of the safety of a popular practice.

PubMed

Poole, Debra Ann; Dickinson, Jason J

2014-02-01

This study evaluated the impact of comfort drawing (allowing children to draw during interviews) on the quality of children's eyewitness reports. Children (N=219, 5 to 12 years) who had participated in an earlier memory study returned 1 or 2 years later, experienced a new event, and described these events during phased, investigative-style interviews. Interviewers delivered the same prompts to children in the no drawing and drawing conditions but provided paper and markers in the drawing condition, invited these children to draw, and periodically asked if they would like to make another picture. Most children in the drawing condition were interested in using the materials, and measures of eyewitness performance were sensitive to differences in cognitive ability (i.e., age) and task difficulty (i.e., delay between the remote event and interview). Comfort drawing had no overall impact as evidenced by nonsignificant main effects of condition across 20 performance measures, although more of the younger children reported experienced touching in the drawing than no drawing condition. The children successfully divided attention between voluntary drawing and conversations about past events. Importantly, comfort drawing did not impair the amount of information recalled, the accuracy of children's answers, or even the extent to which interviewers needed to prompt for answers. Due to the large number of analyses, the benefit of drawing for younger, touched children requires replication. Comfort drawing poses no documented risks for typically-developing school-aged children, but the practice remains untested for younger children and those with cognitive impairments. Copyright © 2013 Elsevier Ltd. All rights reserved.

Make a Drawing. Effects of Strategic Knowledge, Drawing Accuracy, and Type of Drawing on Students' Mathematical Modelling Performance

ERIC Educational Resources Information Center

Rellensmann, Johanna; Schukajlow, Stanislaw; Leopold, Claudia

2017-01-01

Drawing strategies are widely used as a powerful tool for promoting students' learning and problem solving. In this article, we report the results of an inferential mediation analysis that was applied to investigate the roles that strategic knowledge about drawing and the accuracy of different types of drawings play in mathematical modelling…

Evaluation of family drawings of physically and sexually abused children.

PubMed

Piperno, Francesca; Di Biasi, Stefania; Levi, Gabriel

2007-09-01

The aim of this study is to analyse the family drawings of two groups of physically and/or sexually abused children as compared to the drawings of non-abused children of a matched control group. The drawings by 12 physically abused, 12 sexually abused and 12 non-abused children, all aged between 5 years-old and 10 years-old, were assessed and compared. Family drawings were analysed using a specific Screening Inventory (FDI-Family Drawing Inventory). This Inventory takes into consideration such qualitative and quantitative variables as the quality of drawing, the children's perception of their family members and their own perception of themselves within the family system. The results have shown significant differences between the abused minors and the control group. Abused children are more likely to draw distorted bodies, the human figure is usually represented devoid of details, their drawings generally show clear signals of trauma and the majority of the abused children are likely to exclude their primary caregiver from the drawings. The "drawings of the family" of physically and/or sexually abused children significantly evidence a greater emotional distress then the drawings of the non-abused children of the matched control group.

ENGINEERING DEVELOPMENT OF COAL-FIRED HIGH-PERFORMANCE POWER SYSTEMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Unknown

1999-02-01

A High Performance Power System (HIPPS) is being developed. This system is a coal-fired, combined cycle plant with indirect heating of gas turbine air. Foster Wheeler Development Corporation and a team consisting of Foster Wheeler Energy Corporation, Bechtel Corporation, University of Tennessee Space Institute and Westinghouse Electric Corporation are developing this system. In Phase 1 of the project, a conceptual design of a commercial plant was developed. Technical and economic analyses indicated that the plant would meet the goals of the project which include a 47 percent efficiency (HHV) and a 10 percent lower cost of electricity than an equivalentmore » size PC plant. The concept uses a pyrolysis process to convert coal into fuel gas and char. The char is fired in a High Temperature Advanced Furnace (HITAF). The HITAF is a pulverized fuel-fired boiler/air heater where steam is generated and gas turbine air is indirectly heated. The fuel gas generated in the pyrolyzer is then used to heat the gas turbine air further before it enters the gas turbine. The project is currently in Phase 2 which includes engineering analysis, laboratory testing and pilot plant testing. Research and development is being done on the HIPPS systems that are not commercial or being developed on other projects. Pilot plant testing of the pyrolyzer subsystem and the char combustion subsystem are being done separately, and after each experimental program has been completed, a larger scale pyrolyzer will be tested at the Power Systems Development Facility (PSDF) in Wilsonville, AL. The facility is equipped with a gas turbine and a topping combustor, and as such, will provide an opportunity to evaluate integrated pyrolyzer and turbine operation. This report addresses the areas of technical progress for this quarter. A general arrangement drawing of the char transfer system was forwarded to SCS for their review. Structural steel drawings were used to generate a three-dimensional model of the char transfer system including all pressure vessels and major piping components. Experimental testing at the Combustion and Environmental Test Facility continued during this quarter. Performance of the char burner, as benchmarked by flame stability and low NOx, has been exceptional. The burner was operated successfully both without natural gas and supplemental pulverized coal.« less

Building technological capability within satellite programs in developing countries

NASA Astrophysics Data System (ADS)

Wood, Danielle; Weigel, Annalisa

2011-12-01

This paper explores the process of building technological capability in government-led satellite programs within developing countries. The key message is that these satellite programs can learn useful lessons from literature in the international development community. These lessons are relevant to emerging satellite programs that leverage international partnerships in order to establish local capability to design, build and operate satellites. Countries with such programs include Algeria, Nigeria, Turkey, Malaysia and the United Arab Emirates. The paper first provides background knowledge about space activity in developing countries, and then explores the nuances of the lessons coming from the international development literature. Developing countries are concerned with satellite technology because satellites provide useful services in the areas of earth observation, communication, navigation and science. Most developing countries access satellite services through indirect means such as sharing data with foreign organizations. More countries, however, are seeking opportunities to develop satellite technology locally. There are objective, technically driven motivations for developing countries to invest in satellite technology, despite rich debate on this topic. The paper provides a framework to understand technical motivations for investment in satellite services, hardware, expertise and infrastructure in both short and long term. If a country decides to pursue such investments they face a common set of strategic decisions at the levels of their satellite program, their national context and their international relationships. Analysis of past projects shows that countries have chosen diverse strategies to address these strategic decisions and grow in technological capability. What is similar about the historical examples is that many countries choose to leverage international partnerships as part of their growth process. There are also historical examples from outside the space arena in which organizations have pursued technological capability. Scholars have analyzed these examples and developed insightful frameworks. The paper draws key concepts from this literature about the nature of development, technology, knowledge and organizational learning. These concepts are relevant to learning in new satellite programs, but the ideas must be applied cautiously because of the nature of satellite technology. The paper draws three major lessons from the international development literature regarding absorptive capacity, tacit knowledge and organizational learning; it synthesizes these lessons into a cohesive, original framework. The closing section proposes future work on a detailed study of technological learning in specific government satellite programs.

The effect of color on the recognition and use of line drawings by children with severe intellectual disabilities.

PubMed

Stephenson, Jennifer

2007-03-01

Line drawings are commonly used as communication symbols for individuals with severe intellectual disabilities. This study investigated the effect of color on the recognition and use of line drawings by young children with severe intellectual disabilities and poor verbal comprehension who were beginning picture users. Drawings where the color of the picture matched the object and where the color of the drawing did not match the object were used, as well as black and white line drawings. Tentative findings suggest that some students with intellectual disabilities may find it more difficult to recognize and line drawings where the color does not match the object compared to line drawings where the color of the drawing does match the color of the object.

Weber (slope) analyses of timing variability in tapping and drawing tasks.

PubMed

Spencer, Rebecca M C; Zelaznik, Howard N

2003-12-01

Timing variability in continuous drawing tasks has not been found to be correlated with timing variability in repetitive finger tapping in recent studies (S. D. Robertson et al., 1999; H. N. Zelaznik, R. M. C. Spencer, & R. B. Ivry, 2002). Furthermore, the central component of timing variability, as measured by the slope of the timing variance versus the square of the timed interval, differed for tapping and drawing tasks. On the basis of those results, the authors posited that timing in tapping is explicit and as such uses a central representation of the interval to be timed, whereas timing in drawing tasks is implicit, that is, the temporal component is an emergent property of the trajectory produced. The authors examined that hypothesis in the present study by determining the linear relationship between timing variance and squared duration for tapping, circle-drawing, and line-drawing tasks. Participants (N = 50) performed 1 of 5 tasks: finger tapping, line drawing in the x dimension, line drawing in the y dimension, continuous circle drawing timed in the x dimension, or continuous circle drawing timed in the y dimension. The slopes differed significantly between finger tapping, line drawing, and circle drawing, suggesting separable sources of timing variability. The slopes of the 2 circle-drawing tasks did not differ from one another, nor did the slopes of the 2 line-drawing tasks differ significantly, suggesting a shared timing process within those tasks. Those results are evidence of a high degree of specificity in timing processes.

Research on AutoCAD secondary development and function expansion based on VBA technology

NASA Astrophysics Data System (ADS)

Zhang, Runmei; Gu, Yehuan

2017-06-01

AutoCAD is the most widely used drawing tool among the similar design drawing products. In the process of drawing different types of design drawings of the same product, there are a lot of repetitive and single work contents. The traditional manual method uses a drawing software AutoCAD drawing graphics with low efficiency, high error rate and high input cost shortcomings and many more. In order to solve these problems, the design of the parametric drawing system of the hot-rolled I-beam (steel beam) cross-section is completed by using the VBA secondary development tool and the Access database software with large-capacity storage data, and the analysis of the functional extension of the plane drawing and the parametric drawing design in this paper. For the secondary development of AutoCAD functions, the system drawing work will be simplified and work efficiency also has been greatly improved. This introduction of parametric design of AutoCAD drawing system to promote the industrial mass production and related industries economic growth rate similar to the standard I-beam hot-rolled products.