Rigor "and" Relevance: Enhancing High School Students' Math Skills through Career and Technical Education

ERIC Educational Resources Information Center

Stone, James R., III; Alfeld, Corinne; Pearson, Donna

2008-01-01

Numerous high school students, including many who are enrolled in career and technical education (CTE) courses, do not have the math skills necessary for today's high-skill workplace or college entrance requirements. This study tests a model for enhancing mathematics instruction in five high school CTE programs (agriculture, auto technology,…

Effects of Think-Aloud Pair Problem Solving on Secondary-Level Students' Performance in Career and Technical Education Courses

ERIC Educational Resources Information Center

Pate, Michael L.; Miller, Greg

2011-01-01

A randomized posttest-only control group experimental design was used to determine the effects of think-aloud pair problem solving (TAPPS) on the troubleshooting performance of 34 secondary-level career and technical education students. There was no significant difference in success rate between TAPPS students and students who worked alone…

Teacher Perspectives on Performance Based Student Assessment in Career and Technical Education in West Virginia Public Schools

ERIC Educational Resources Information Center

Tuckwiller, Brenda L.

2012-01-01

The purpose of this study was to investigate career and technical education teachers' level of knowledge and use of performance based student assessment practices in West Virginia's secondary and post-secondary career education centers. In addition, this study sought to determine what relationships, if any, exist between levels of knowledge and…

The Effect of Socioeconomic Status and Gender on High School Student Perceptions about Career and Technical Education

ERIC Educational Resources Information Center

Chadwell, Briael Marie

2016-01-01

This quantitative study examines the perceptions of career and technical education (CTE) among high school students based on their socioeconomic status and gender, and the interaction between the two. The study used a convenience sample of 207 students from four coastal South Carolina high schools. The data was collected using the Image of…

Modernizing Career and Technical Education Programs

ERIC Educational Resources Information Center

Drage, Karen

2009-01-01

High-quality career and technical education (CTE) programs can launch America's future competitiveness through increased student engagement, the innovative integration of traditional academic courses, and by meeting the needs of both employers and the economy as a whole. American students failing to keep pace with their international counterparts…

A Study of Learning-Centered Leadership Skills of Principals in Career and Technical Education Schools

ERIC Educational Resources Information Center

Rodman, Mary E.

2012-01-01

Despite years of educational reform, secondary students have demonstrated only modest increases in achievement. Career and technical education students have not demonstrated the same level of performance as non-career and technical education students. Except for teachers, principals have the greatest influence over student achievement. What should…

Technical Skill Attainment and Post-Program Outcomes: An Analysis of Pennsylvania Secondary Career and Technical Education Graduates

ERIC Educational Resources Information Center

Staklis, Sandra; Klein, Steven

2010-01-01

Since the mid-1990s, the Pennsylvania Department of Education (PDE) has required all students concentrating in career and technical education (CTE) programs to complete a standardized technical skill assessment at or near the end of their program. Results of technical skill assessments are used for a number of purposes, including recognizing…

Vocational-Technical Education: A Plan for Monroe County, Florida.

ERIC Educational Resources Information Center

Mills, Hugh L., Sr., Ed.; Pilcher, Palmer, C., Ed.

Suggested vocational-technical education programs for the Monroe County Florida school system are presented along with recommendations to implement the principle of coordinated career education in the public schools. Expansion of vocational-technical programs is emphasized to expose all students from kindergarten through Grade 12 to career…

Safety Control and Safety Education at Technical Institutes

NASA Astrophysics Data System (ADS)

Iino, Hiroshi

The importance of safety education for students at technical institutes is emphasized on three grounds including safety of all working members and students in their education, research and other activities. The Kanazawa Institute of Technology re-organized the safety organization into a line structure and improved safety minds of all their members and now has a chemical materials control system and a set of compulsory safety education programs for their students, although many problems still remain.

The Oregon Career and Technical Education Study

ERIC Educational Resources Information Center

Klein, Steven; Richards, Amanda

2008-01-01

Oregon educators, policymakers, and business people are working together to increase the number and quality of Career and Technical Education (CTE) programs in secondary and postsecondary institutions. CTE is an integral component of Oregon's education and workforce development system and prepares students for careers in areas ranging from the…

Career Technical Education Enhancement Fund Report

ERIC Educational Resources Information Center

California Community Colleges, Chancellor's Office, 2015

2015-01-01

The California Community Colleges serve more than 2.1 million students and is the largest system of higher education in the nation. The state's 112 colleges provide workforce training, teach basic math and English, and prepare students for transfer to four-year universities and colleges. Senate Bill 852 established the Career Technical Education…

The Annual Career and Technical Education High School Report, 2007

ERIC Educational Resources Information Center

Iowa Department of Education, 2007

2007-01-01

This report, the first "Annual Career and Technical Education High School Report" was created to serve as a rich resource for educators, school and college administrators, policymakers, and other citizens by providing essential summative data on career and technical education in Iowa at the high school level. Students increasingly need…

Florida Study of Career and Technical Education. Final Report

ERIC Educational Resources Information Center

Jacobson, Louis; Mokher, Christine

2014-01-01

A key goal of the "Carl D. Perkins Career and Technical Education Act of 2006" ("Perkins IV") is to ensure career and technical education (CTE) programs are widely available for preparing high school and college students for "high skill, high wage, or high demand occupations in current or emerging professions"…

Vocational-Technical Education Today.

ERIC Educational Resources Information Center

American Vocational Association, Alexandria, VA.

Vocational-technical education (VTE) today encompasses a diverse array of programs to equip students with work and life skills. A widening skills gap in the nation's work force, coupled with the fact that only about 20% of the nation's current jobs require a four-year college degree, has made VTE more important than ever before. Research has…

Seizing the Future: How Ohio's Career-Technical Education Programs Fuse Academic Rigor and Real-World Experiences to Prepare Students for College and Careers

ERIC Educational Resources Information Center

Guarino, Heidi; Yoder, Shaun

2015-01-01

"Seizing the Future: How Ohio's Career and Technical Education Programs Fuse Academic Rigor and Real-World Experiences to Prepare Students for College and Work," demonstrates Ohio's progress in developing strong policies for career and technical education (CTE) programs to promote rigor, including college- and career-ready graduation…

Exploring Embedded Remediation for Community College Career Technical Education Pathways: Promising Practices

ERIC Educational Resources Information Center

Cooper, Donna Walters

2014-01-01

Public community colleges enroll nearly half of all undergraduate students in the United States and many of these students are enrolled in 1- and 2-year Career and Technical Education programs. Employers have indicated that colleges should place more emphasis on reading, writing, and critical thinking skills. Career Technical Education can address…

The Attitudes of the Final Students of Technical Education Faculty at Kocaeli University towards Their Faculty's Closing Down

ERIC Educational Resources Information Center

Ira, Nejat

2015-01-01

The purpose of the research is to identify the attitudes of the students at Kocaeli University towards closing down of Technical Education Faculty. These faculties were decided to be closed down in 2009. Since then, both the students and the instructors have been in ambiguity about their future careers. This situation has also affected them…

The Impact of Secondary Career and Technical Education on Postsecondary Career and Educational Placement

ERIC Educational Resources Information Center

Moss, Roy Allen

2015-01-01

The purpose of this research was to provide evidence of the impact career and technical education courses have on students after graduation. Numbers of Career and Technical Education (CTE) completers have continually dropped at the participating schools for the past five years. Five categories of placement after graduation were studied including…

Vocational-Technical Education at the Crossroads.

ERIC Educational Resources Information Center

Brand, Betsy

In a nation where only about half of high school students go on to 4-year postsecondary institutions, vocational-technical education plays a critical role in preparing thousands of people for their first work experience and in retraining thousands more to take full advantage of new job opportunities. As part of the educational reform movement of…

The Potential of Experiential Learning Models and Practices in Career and Technical Education and Career and Technical Teacher Education

ERIC Educational Resources Information Center

Clark, Robert W.; Threeton, Mark D.; Ewing, John C.

2010-01-01

Since inception, career and technical education programs have embraced experiential learning as a true learning methodology for students to obtain occupational skills valued by employers. Programs have integrated classroom instruction with laboratory experiences to provide students a significant opportunity to learn. However, it is questionable as…

Access Barriers to Distance Education Perceived by Inservice and Preservice Career and Technical Education Majors.

ERIC Educational Resources Information Center

Zirkle, Chris

The access barriers to distance education faced by inservice and preservice career and technical education (CTE) majors were examined through a survey of 76 students enrolled in undergraduate- and graduate-level CTE education programs. Completed questionnaires were received from 60 students (response rate, 78.9%). Forty respondents worked…

Special Education Finance in California. Technical Appendices

ERIC Educational Resources Information Center

Hill, Laura; Warren, Paul; Murphy, Patrick; Ugo, Iwunze; Pathak, Aditi

2016-01-01

This document presents the technical appendices that accompany the full report, "Special Education Finance in California." The appendices include: (1) Problems with AB 602 and Other State Funding Programs for Special Education; (2) Additional Figures for Analysis of Distribution of Students with Disabilities; (3) Using Supplemental and…

Predicting Student Performance in Web-Based Distance Education Courses Based on Survey Instruments Measuring Personality Traits and Technical Skills

ERIC Educational Resources Information Center

Hall, Michael

2008-01-01

Two common web-based surveys, "Is Online Learning Right for Me?' and "What Technical Skills Do I Need?", were combined into a single survey instrument and given to 228 on-campus and 83 distance education students. The students were enrolled in four different classes (business, computer information services, criminal justice, and…

Increasing Student Achievement: Educators' Guide to Secondary Career & Technical Education Assessment

ERIC Educational Resources Information Center

National Occupational Competency Testing Institute, 2012

2012-01-01

This guide attempts to address an aspect of secondary CTE (Career and Technical Education) that has received little attention; the assessment literacy of educators. School leaders need to go beyond ensuring routine compliance with external and internal regulatory forces to identify ways in which CTE program teachers might better understand…

Innovative methods of popularizing technical education

NASA Astrophysics Data System (ADS)

Shkitsa, L. Y.; Panchuk, V. G.; Kornuta, V. A.

2017-05-01

There have been analyzed reasons of the loss of technical education’s popularity. Also, the analysis of known educational and production methods, oriented at the innovative model of development of society, was performed. It is stated that the acquisition of 21st century’s skills as a result of competition of technical education are natural for the DIY ideology, which was realized in the institutions like Fab Lab. The new educational strategy, based on project-based learning, is proposed to be implemented as a special laboratory with equipment, which would be a center of innovative development for students at the Technical University. Moreover, the list of projects planned for implementation, that includes not only projects, specific to a particular university, but also projects, demanded by society as a whole, is specified. It is worth to implement trendy projects in the laboratory, such as toy-like, ecological projects; projects of the energy dependence decrease or the energy efficiency increase, modern digital or innovative projects etc. The student should gain knowledge, skills and, possibly, equipment that are available for immediate usage on the labor market or for the realization of his own projects or the community’s projects in everyday life after the realization of the particular project at the laboratory

Basic Concepts and Definitions for Privacy and Confidentiality in Student Education Records. SLDS Technical Brief 1. NCES 2011-601

ERIC Educational Resources Information Center

National Center for Education Statistics, 2010

2010-01-01

The National Center for Education Statistics (NCES) is launching a new series of Technical Briefs on various aspects of the protection of personally identifiable information in students' education records. While driven by recent events, the principles and practices that are outlined in this series can be applied more generally to personally…

Technical and Vocational Education in Kuwait.

ERIC Educational Resources Information Center

Al-Ali, Salahaldeen

1993-01-01

The Kuwaiti system of vocational-technical education has not lived up to expectations because of low student aptitude, lack of managerial and academic facilities, and weak industrial linkages. The Gulf War exacerbated skilled labor shortages, leaving the country dependent on expatriates. (SK)

Distance Education Programs in Texas Community & Technical Colleges: Assessing Student Support Services in a Virtual Environment.

ERIC Educational Resources Information Center

Luedtke, Cherry Beth

This project evaluates the status of distance learning at 54 public, two-year community, and technical colleges in Texas. Data was collected from the Web sites of each of the institutions. The Web site data indicted that 44 of the colleges refer specifically to distance education courses offered. To assess what student support services are…

Agricultural In-Service Needs of Introductory Level Career and Technical Education Teachers

ERIC Educational Resources Information Center

Christensen, Jolene; Warnick, Brian K.; Spielmaker, Debra; Tarpley, Rudy S.; Straquadine, Gary S.

2009-01-01

This study identified and prioritized the agricultural in-service needs of introductory level career and technical education teachers in Utah. The Utah State Board of Education requires that all seventh grade students complete an introductory career and technical education course as their first formal career exploration experience. One component…

The Need for Consumer Relations in Technical Education.

ERIC Educational Resources Information Center

Isberner, Fred R.; Armstrong, Connie

1995-01-01

Technical education curricula should include the topical area of customer relations. Students need to learn how to listen to customers, handle complaints, monitor quality, and understand customer satisfaction. (SK)

Precollege (Remedial) Education. Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2015

2015-01-01

Washington's community and technical colleges are fundamentally transforming precollege (remedial) education to move students faster into credit-bearing classes. The state's colleges are working with high schools to prevent the need for remediation. They are also shortening the path for college students of all ages who need the extra help. Courses…

Improving the Basic Skills of Vocational-Technical Students: An Administrator's Guide. Competency-Based Vocational Education Administrator Module Series.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This guide provides information and guidelines intended to assist vocational administrators in developing and evaluating programs to improve the basic skills of vocational-technical students. Part one provides background information about basic skills and examines their role in vocational education. Discussed next are various program types,…

Overconfidence of Vocational Education Students When Entering Higher Education

ERIC Educational Resources Information Center

Bowden, Mark P.; Abhayawansa, Subhash; Bahtsevanoglou, John

2015-01-01

Purpose: There is evidence that students who attend Technical and Further Education (TAFE) prior to entering higher education underperform in their first year of study. The purpose of this paper is to examine the role of self-efficacy in understanding the performance of students who completed TAFE in the previous year in a first year subject of…

Technical skills acquisition in surgery-bound senior medical students: an evaluation of student assertiveness.

PubMed

Talbott, Vanessa A; Marks, Joshua A; Bodzin, Adam S; Comeau, Jason A; Maxwell, Pinckney J; Isenberg, Gerald A; Martin, Niels D

2012-01-01

To prepare students pursuing surgical careers, we devised a senior subinternship curriculum supplement that focused on the acquisition of technical skills required of surgical residents. We hypothesized that more assertive students, those that accomplished more of the curriculum, would perform better on a technical skills Objective Structured Clinical Examination (OSCE). Senior medical students rotating on their first general surgery subinternship were administered a 6-station OSCE on the first day of their subinternship and again during the final week of the month-long rotation. A self-directed, 38-task "scavenger hunt" representing common intern level clinical skills, procedures, and patient care activities was provided to each student. The study was performed at Jefferson Medical College, a large, private medical school in Philadelphia, PA. Forty-nine senior students completed surgical subinternships between July 2009 and September 2010, and participated both in the pre-/post-OSCEs and the scavenger hunt. Students performed significantly better on the post-rotation OSCE than on the pre-rotation OSCE; 70.2% ± 8.1% vs. 60.4% ± 12.0%, p < 0.0001. Assertiveness scores from the "scavenger hunt" did not correlate with final OSCE scores (r = -0.328, p = 0.25), and were negatively correlated with the change between pre- and post-OSCE scores (r = -0.573, p < 0.04). Individual student assertiveness scores were determined by the number of tasks completed over the course of the rotation. As surgical education becomes more streamlined with evolving work hour restrictions, medical school education is playing an increasingly pivotal role in preparing students for internship. In our study, individual assertiveness in completing structured self-directed learning tasks did not directly predict the acquisition of proficiency in technical skills. We feel assertiveness is overshadowed by other factors that may carry more weight in terms of technical skills acquisition. Further

Diversity in Career and Technical Education On-Line Classrooms: Considering Issues of Gender, Race and Age

ERIC Educational Resources Information Center

Ware, Mary C.; Stuck, Mary F.

2010-01-01

Designers and instructors of courses in career and technical education have realized the value of on-line delivery of instruction during the past several decades. Many students enrolled in career and technical education courses are what have been labeled "non-traditional" students. On-line learning is helpful to these students because it…

High School Students' Perception of Career Technical Education and Factors that Influence Enrollment in Programs at a Regional Occupational Center

ERIC Educational Resources Information Center

St. Gean, Laurie M.

2010-01-01

The purpose of this study was to learn about the demographic profile of South Bay-area high school Career Technical Education (CTE) students (those who enroll in CTE courses outside the school day), their perceptions related to CTE, the people and other factors that influence them to enroll in CTE courses, and students' opinions on which…

The Image of Career and Technical Education. Practice Application Brief.

ERIC Educational Resources Information Center

Brown, Bettina Lankard

Career and technical education (CTE) instructors can use four strategies to present a new image of CTE as a viable strategy for education and work. Strategy 1 is to give students something to brag about. Three ways to help students see their vocational studies as unique and special opportunities for satisfying and rich experiences are to provide…

On the Rise: The Role of Career and Technical Education in Arizona's Future. 21st Century Career and Technical Education Pathways

ERIC Educational Resources Information Center

Gupta, Sapna

2013-01-01

This report examines the potential of Career and Technical Education (CTE) in Arizona in terms of providing employers certified skills need to compete regionally, nationally and internationally and students avenues for higher education, quality of life and job satisfaction. An appendix on "Estimating the Effect of CTE on High School…

The Benefits of Career and Technical Education. Trends and Issues Alert.

ERIC Educational Resources Information Center

Brown, Bettina Lankard

Career and technical education (CTE) can benefit students directly by providing earning advantages before and after graduation. It can benefit them indirectly by increasing engagement, retention, and persistence and by directing them to postsecondary education and pursuit of lifelong learning. CTE programs motivate students to get involved in…

An Analysis of Massachusetts Department of Elementary and Secondary Education Vocational Technical Education Framework for Culinary Arts and Its Effectiveness on Students Enrolled in Post-Secondary Culinary Programs

ERIC Educational Resources Information Center

D'Addario, Albert S.

2011-01-01

This field-based action research practicum investigated how students who have completed culinary training programs in Massachusetts public secondary schools perform in post-secondary coursework. The Department of Elementary and Secondary Education has developed the Vocational Technical Education (VTE) Framework for Culinary Arts that outlines…

Assessing the Value of Rural California High School Career Technical Education

ERIC Educational Resources Information Center

Morehead, Coleen Louise

2015-01-01

While empirical studies on rural education have defined many of the socioeconomic factors associated with rural students nationally, there is a lack of definitive and comprehensive research defining the benefit or value of career technical education for rural California high school students. Consequently, this lack of research may in turn…

Mentoring disadvantaged nursing students through technical writing workshops.

PubMed

Johnson, Molly K; Symes, Lene; Bernard, Lillian; Landson, Margie J; Carroll, Theresa L

2007-01-01

Recent studies have identified a problematic gap for nursing students between terse clinical writing and formal academic writing. This gap can create a potential barrier to academic and workplace success, especially for disadvantaged nursing students who have not acquired the disciplinary conventions and sophisticated writing required in upper-level nursing courses. The authors demonstrate the need for writing-in-the-discipline activities to enhance the writing skills of nursing students, describe the technical writing workshops they developed to mentor minority and disadvantaged nursing students, and provide recommendations to stimulate educator dialogue across disciplines and institutions.

Technical Advances and Fifth Grade Reading Comprehension: Do Students Benefit?

ERIC Educational Resources Information Center

Fountaine, Drew

This paper takes a look at some recent studies on utilization of technical tools, primarily personal computers and software, for improving fifth-grade students' reading comprehension. Specifically, the paper asks what benefits an educator can expect students to derive from closed-captioning and computer-assisted reading comprehension products. It…

Core ITAC for Career-Focused Education. Integrated Technical & Academic Competencies.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This document introduces the underlying principles and components of Ohio's Integrated Technical and Academic Competencies (ITAC) system of career-focused education, which combines high-level academics and technical skills with a real-life context for learning that maximizes students' present and future academic and career success. The document…

Factors That Promote Motivation and Academic Engagement in a Career Technical Education Context

ERIC Educational Resources Information Center

Loera, Gustavo; Nakamoto, Jonathan; Oh, Youn Joo; Rueda, Robert

2013-01-01

Drawing on social cognitive theory, this study examined the relationship between student and school-based factors (e.g., educational aspirations, quality of the program of study, and adults' impact on college enrollment) and students' academic engagement and satisfaction with student life in a career technical education (CTE) setting. This study…

Do Mathematics and Reading Competencies Integrated into Career and Technical Education Courses Improve High School Student State Assessment Scores?

ERIC Educational Resources Information Center

Pierce, Kristin B.; Hernandez, Victor M.

2015-01-01

A quasi experimental study tested a contextual teaching and learning model for integrating reading and mathematics competencies through 13 introductory career and technical education (CTE) courses. The treatment group consisted of students in the 13 introductory courses taught by the CTE teachers who designed the units and the control group…

New Directions for High School Career and Technical Education in Wyoming: A Strategic Plan

ERIC Educational Resources Information Center

Hoachlander, Gary; Klein, Steven; Studier, Carol

2007-01-01

This report offers a plan for improving career and technical education (CTE) in Wyoming, but it is about more than just technical education. Realizing the potential of CTE to contribute to students' mastery of both academic and technical knowledge depends not only on strengthening the CTE curriculum, but also on embedding CTE in a larger program…

The International Association for the Exchange of Students for Technical Experience. 34th Annual Report 1981.

ERIC Educational Resources Information Center

International Association for the Exchange of Students for Technical Experience/United States, Columbia, MD.

The 1981 annual report of the International Association for the Exchange of Students for Technical Experience (IAESTE) is presented. IAESTE seeks to provide students at institutions of higher education with technical experience abroad relative to their studies and to promote international understanding among all students. An international report…

Quality Career/Technical Programs Prepare Students to Succeed in a New, More Challenging Economy

ERIC Educational Resources Information Center

Southern Regional Education Board (SREB), 2008

2008-01-01

Quality career/technical education and its role in school improvement was a primary theme of the 2008 "High Schools That Work" ("HSTW") Staff Development Conference. This newsletter covers crucial topics in quality CTE (career and technical education), including assessing the quality and effectiveness of CT programs, preparing students to succeed…

USAF/SCEEE Graduate Student Summer Support Program (1982). Management and Technical Report.

DTIC Science & Technology

1982-10-01

AD-A130 767 USAF/SCEEE GRADUATE STUDENT SUMMER SUPPORT PROGRAM (1982) MANAGEMENT AND..(U) SOUTHEASTERN CENTER FORELECTRICAL ENGINEERING EDUCATION INC...SUMMER SUPPORT PROGRAM Conducted by Southeastern Center for Electrical Engineering Education under USAF Contract Number F49620-82-C-0035 MANAGEMENT ...UNITED STATES AIR FORCE GRADUATE STUDENT SL24MER SUPPORT PROGRAM 1982 PROGRAM MANAGEMENT AND TECHNICAL REPORT SOUTHEASTERN CENTER FOR ELECTRICAL

Linked Learning: Can Career and Technical Education Programs Take California High Schools into the 21st Century?

ERIC Educational Resources Information Center

Adams, Brian Edward

2012-01-01

This qualitative study explored the ability of a linked learning career and technical education program to engage fully students and thereby increase at-risk students' persistence in school. The focus was to identify the degree to which linked learning career and technical education programs provide a community atmosphere, increase and maintained…

Positive and Negative Experiences of Career Technical Secondary Students in Online Courses

ERIC Educational Resources Information Center

Harms, David Mathew

2016-01-01

Research indicates that secondary students who are successful in online classes share common traits. However, many secondary career technical education (CTE) students taking online courses do not demonstrate the traits identified for success. CTE students may not benefit from online classes unless they are designed with their needs in mind. The…

Application of the Virginia STEPS (Student/Teacher Education Planning System) by Basic Skills Education Teachers.

ERIC Educational Resources Information Center

Seguin, Barbara; Swanson, Lois

The Virginia STEPS (Student/Teacher Education Planning System) was developed to enable adult basic education (ABE) students to become independent learners responsible for planning, carrying out, evaluating, and making adjustments in their education. ABE instructors at Blackhawk Technical College in Wisconsin have adapted the STEPS model to make…

Analysis of Student Perceptions of the Psychosocial Learning Environment in Online and Face-to-Face Career and Technical Education Courses

ERIC Educational Resources Information Center

Carver, Diane L.; Kosloski, Michael F., Jr.

2015-01-01

This study analyzed student perceptions of the psychosocial learning environment in online and face-to-face career and technical education courses, and used survey data from a school district in Washington state. A Mann-Whitney "U" test was used to measure variability and compare the mean scores for a series of psychosocial learning…

Improving Secondary Career and Technical Education through Professional Development: Alternative Certification and Use of Technical Assessment Data

ERIC Educational Resources Information Center

National Research Center for Career and Technical Education, 2011

2011-01-01

Secondary career and technical education (CTE) is a field in transition. It is moving from a primary focus on preparing students for entry-level employment to preparing them for continuing education and training as well as employment. The rapid pace of change in technology and the global economy has created a demand for workers who are able to…

Empowering Technical College Students in the Work Place.

ERIC Educational Resources Information Center

Lewis, Theodore; And Others

The purpose of this report is to describe how Minnesota technical college students can be empowered through vocational education to be full participants in the labor force and to deal with the changes that they encounter in the workplace. Chapter 1 introduces the problem of keeping up with changes in the ways in which work is performed. Chapter 2…

Demand, Supply and Results for Secondary Career and Technical Education.

ERIC Educational Resources Information Center

Washington State Workforce Training and Education Coordinating Board, Olympia.

The benefits of offering high school students career and technical education (CTE) in addition to training in basic academic skills and the cost-effectiveness of CTE were examined by reviewing available data on demand, supply, and results for CTE. The analysis confirmed that the market and demand for workers with only a high school education still…

75 FR 29732 - Career and Technical Education Program-Promoting Rigorous Career and Technical Education Programs...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-27

... DEPARTMENT OF EDUCATION Career and Technical Education Program--Promoting Rigorous Career and Technical Education Programs of Study Catalog of Federal Domestic Assistance (CFDA) Number: 84.051C. AGENCY: Office of Vocational and Adult Education, Department of Education. ACTION: Notice of proposed priorities...

Postsecondary Career and Technical Education: Demographic Differences in Enrollment, Departure, and Completion

ERIC Educational Resources Information Center

Hinz, Serena; Warkentien, Siri; Hong, Yihua

2017-01-01

This report examines differences in enrollment, departure, and completion at postsecondary, subbaccalaureate career and technical education (CTE) programs among a nationally representative sample of students who first entered postsecondary education in academic year 2011-12. Logistic regression results show that female, Hispanic, Pell…

Moral suffering among nurse educators of technical courses in nursing.

PubMed

Duarte, Carla Godinho; Lunardi, Valéria Lerch; Silveira, Rosemary Silva da; Barlem, Edson Luiz Devos; Dalmolin, Graziele de Lima

2017-04-01

to understand situations of moral suffering experienced at work by nurse educators of technical courses in nursing. a qualitative study with discursive textual analysis by means of semi-structured interviews with ten nurse educators at two professional educational institutions in southern Brazil. two categories were established: lack of commitment on the part of students to the future profession, expressed through disrespect and disregard for the work of nurse educators, with inappropriate behaviors and attitudes; and lack of commitment to the learning-teaching process, expressed by indifference to the professional profile and lack of interest in lessons and care practices associated with learning gaps. these situations have an impact on experiences of moral suffering by nurse educators, and show a need for rethinking their practice, relationships, and educational spaces, and implementing strategies to favor the confrontation of dilemmas and conflicts experienced in educational practice in technical courses in nursing.

Measures of Success: A Survey of Selected Vocational and Technical Education Programs in Florida which Train Students in Occupations Requiring Licenses.

ERIC Educational Resources Information Center

Florida State Advisory Council on Vocational and Technical Education, Tallahassee.

A study of 13 vocational and technical education programs in Florida was conducted which represented an attempt to identify valid and reliable sources of data whereby some vocational programs might be evaluated in specified terms of effectiveness. The programs selected for study were among those which require graduating students to pass licensing…

An English Language Curriculum for Technical Students. Practical Papers in English Education, Volume 2.

ERIC Educational Resources Information Center

Hutchinson, Tom; And Others

This curriculum for technical students aims at linking the identity of the learner, his initial linguistic and technical competence, and his expectations with the competence expected of him on entering the technical college. The materials of the curriculum make use of a wide variety of information and data sources such as school-level science…

The Influence and Outcomes of High School to College Transition Policy (Tech Prep) for Career and Technical Education Students in Massachusetts

ERIC Educational Resources Information Center

Shaw, Christine

2012-01-01

Over the past two decades, the role of career and technical education has shifted from one preparing students directly for employment, to one that offers vocational training as well as college preparatory academics. To support this effort, the federal government enacted the "Tech Prep Act" Title II under the larger "1990 Carl D.…

Career and Technical Education and Academic Progress at the End of High School: Evidence from the Education Longitudinal Study of 2002

ERIC Educational Resources Information Center

Bozick, Robert; Dalton, Ben

2013-01-01

This report examines the role of career and technical education (CTE) for assessing students in learning mathematics and preventing students from dropping out of high school. CTE is a wide field of educational practice that includes occupational training and career preparation offered in formats ranging from individual courses to comprehensive…

Strategic Management for Competitive Advantage: A Case Study of Higher Technical and Vocational Education in Taiwan

ERIC Educational Resources Information Center

Huang, Hsun-I; Lee, Cheng-Fei

2012-01-01

Higher technical and vocational education institutions in Taiwan face the pressure of an oversupply of student places and fierce competition from domestic and international institutions. To cope with these challenges, higher technical and vocational education institutions that are better equipped to respond to market requirements are expected to…

Improving Career and Technical Education to Help Students Succeed in the Workforce. Hearing before the Subcommittee on Early Childhood, Elementary, and Secondary Education, Committee on Education and the Workforce, U.S. House of Representatives, One Hundred Fourteenth Congress, First Session (October 27, 2015). Serial Number 114-33

ERIC Educational Resources Information Center

US House of Representatives, 2016

2016-01-01

This document records testimony from a hearing held to examine the critical role of career and technical education programs in preparing the nation's students for success in college and career. Many of these programs are funded under the Carl D. Perkins Career and Technical Education Improvement Act of 2006. Member statements were provided by: (1)…

A Qualitative Inquiry of Career Exploration in Highly Implemented Career and Technical Education Programs of Study

ERIC Educational Resources Information Center

Stipanovic, Natalie; Stringfield, Sam

2013-01-01

This qualitative study explores career counseling and guidance services as provided to students engaged in career and technical education programs at three sites in the United States. The sites, consisting of high schools and community colleges, were part of the National Research Center for Career and Technical Education's 5-year studies of…

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

NASA Astrophysics Data System (ADS)

Selwitz, Jason Lawrence

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum and course development and evaluation research. First, the context of, and impetus for, what was formerly called vocational education, now referred to as technical or workforce education, is provided. Second, the research that was undertaken to design and evaluate an associate degree-level STEM workforce education program is described. Third, the adaptation of a student self-assessment of learning gains instrument is reviewed, and an analysis of the resulting data using an adapted logic model is provided, to evaluate the extent to which instructional approaches, in two process control/improvement-focused courses, were effective in meeting course-level intended learning outcomes. Finally, eight integrative multiscale exercises were designed from two example process systems, wastewater treatment and fast pyrolysis. The integrative exercises are intended for use as tools to accelerate the formation of an operator-technician's multiscale vision of systems, unit operations, underlying processes, and fundamental reactions relevant to multiple industries. Community and technical colleges serve a vital function in STEM education by training workers for medium- and high-skilled technical careers and providing employers the labor necessary to operate and maintain thriving business ventures. Through development of the curricular, course, and assessment-related instruments and tools, this research helps ensure associate degree-level technical education programs can engage in a continual process of program evaluation and improvement.

Laboratory Characteristics in Technical Education.

ERIC Educational Resources Information Center

Ives, Quay D.

The research reported is intended to provide a body of information on technical-scientific shop and laboratory education in the field of technological education. The study seeks to address the dearth of organized information on the utilization of laboratories in the technical education context. Various programs involving use of laboratories are…

Information Systems as a Social Space: Collaborative Teaching of Social Literacies to Technical Students

ERIC Educational Resources Information Center

Kalil, Claudia; Monson, Jo; Nodoba, Gaontebale

2010-01-01

This article describes a successful experimental collaborative teaching project to deliver a short course to develop work-relevant social literacies in technical students. Heterogeneous work contexts require both students and educators to find ways to integrate thinking and practices across disciplines. Teaching social literacies to information…

Aligning Career and Technical Education

ERIC Educational Resources Information Center

Workman, Ed; Stubbs, Joyce

2011-01-01

The issues and concerns facing Kentucky Career and Technical Teacher Education (KY CTTE), university teacher educators and state department Career and Technical Education (CTE) leaders in providing and preparing the best CTE teachers possible are not unique to Kentucky. In an effort to better understand these issues and concerns a team of state…

A Question of Trust: Predictive Conditions for Adaptive and Technical Leadership in Educational Contexts

ERIC Educational Resources Information Center

Daly, Alan J.; Chrispeels, Janet

2008-01-01

Recent studies have suggested that educational leaders enacting a balance of technical and adaptive leadership have an effect on increasing student achievement. Technical leadership focuses on problem-solving or first-order changes within existing structures and paradigms. Adaptive leadership involves deep or second-order changes that alter…

Trends in Career and Technical Education Enrollment in Florida High Schools, and the Relation to Graduation and Students Earning Industry-Recognized Certifications

ERIC Educational Resources Information Center

Tamar-Belgraves, Myrna Irva

2016-01-01

Career and technical education (CTE) has been at the forefront of engagement, change, motivation, and high school reform since the early 20th century. However, the focus on tracking students into 4-year universities has significantly reduced the number of quality CTE programs that exist within the high school setting. With the release of the new…

Non-technical skills assessment for prelicensure nursing students: An integrative review.

PubMed

Pires, Sara; Monteiro, Sara; Pereira, Anabela; Chaló, Daniela; Melo, Elsa; Rodrigues, Alexandre

2017-11-01

In nursing, non-technical skills are recognized as playing an important role to increase patient safety and successful clinical outcomes (Pearson and McLafferty, 2011). Non-technical skills are cognitive and social resource skills that complement technical skills and contribute to safe and efficient task performance (Flin et al., 2008). In order to effectively provide non-technical skills training, it is essential to have an instrument to measure these skills. An online search was conducted. Articles were selected if they referred to and/or described instruments assessing non-technical skills for nurses and/or prelicensure nursing students in educational, clinical and/or simulated settings with validation evidence (inclusion criteria). Of the 53 articles located, 26 met the inclusion criteria. Those referred to and/or described 16 instruments with validation evidence developed to assess non-technical skills in multidisciplinary teams including nurses. Although articles have shown 16 valid and reliable instruments, to our knowledge, no instrument has been published or developed and validated for the assessment of non-technical skills of only nurses in general, relevant for use in high-fidelity simulation-based training for prelicensure nursing students. Therefore, there is a need for the development of such an instrument. Copyright © 2017 Elsevier Ltd. All rights reserved.

Medical Laboratory Technician--Microbiology, 10-3. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, the second of three courses in the medical laboratory technician field adapted from military curriculum materials for use in vocational and technical education, was designed as a refresher course for student self-study and evaluation. It is suitable for use by advanced students or beginning students participating in a supervised…

Do Disadvantaged Students Get Less Effective Teaching? Key Findings from Recent Institute of Education Sciences Studies. NCEE Evaluation Brief. Technical Appendix. NCEE 2014-4010

ERIC Educational Resources Information Center

Max, Jeffrey; Glazerman, Steven

2014-01-01

This document represents the technical appendix intended to accompany "Do Disadvantaged Students Get Less Effective Teaching? Key Findings from Recent Institute of Education Sciences Studies. NCEE Evaluation Brief. NCEE 2014-4010." Contents include: (1) Summary of Related, Non-Peer-Reviewed Studies; (2) Methods for Comparing Findings…

Age at first intercourse in an Australian national sample of technical college students.

PubMed

Grunseit, A C; Richters, J

2000-02-01

This study aims to broaden the current body of knowledge regarding the sexual behaviour of young Australians by examining the age and correlates of age of first intercourse in a national sample of Technical and Further Education apprentices. In 1995, students at randomly selected technical colleges in Australia were surveyed on HIV-related issues. Questionnaires were administered to a stratified cluster sample of automotive, hairdressing and commercial cookery apprentices. Respondents were asked the age at which they first had heterosexual vaginal or anal intercourse. Of 4,055 respondents aged 15-24 years, 3,848 answered the question; 3,195 (83%) had had intercourse. Males and females did not differ significantly. Median age at first intercourse was 16 (range 12-23). In multivariate analysis, older age at first intercourse was associated with: greater age at interview; higher school education; church attendance; and State of residence. The model, however, accounted for only 14% of the variance in age at first intercourse. In this sample, those apprentices who completed secondary school became sexually active later on average than those who left before the end of Year 10. For sex education to occur before sexual initiation, it needs to be offered in primary schools and the first year of high school (aged 11-13 years). Further, as technical college students are likely to initiate sex earlier than their age mates still at school, colleges may be in a position to take responsibility for the continuing sexual education of this group, especially for those students entering college at 15 or 16 years of age.

Humanistic Elements in the Educational Practice at a United States Sub-Baccalaureate Technical College

ERIC Educational Resources Information Center

Chen, Peng; Schmidtke, Carsten

2017-01-01

Humanism has never been able to establish a firm place in technical education, which remains predominantly pragmatist in response to industry needs, certification requirements and educational standardisation. However, after a period of decline, humanism has made somewhat of a comeback as part of the movement toward student-centred education.…

Career and Technical Education: States Have Broad Flexibility in Implementing Perkins IV. Report to Congressional Requesters. GAO-09-683

ERIC Educational Resources Information Center

Scott, George A.

2009-01-01

The Carl D. Perkins Career and Technical Education Act of 2006 (Perkins IV) supports career and technical education (CTE) in high schools and postsecondary institutions, such as community colleges. Perkins IV established student performance measures at the secondary and postsecondary levels for state agencies, such as state educational agencies,…

The "Technical and Vocational Education Initiative": Enclaves in British Schools.

ERIC Educational Resources Information Center

Saunders, Murray

The Technical and Vocational Education Initiative (TVEI) is intended as a pilot, on a massive scale, of particular approaches, with a systematic need to identify TVEI effects on students, staff, resources, and curricula. TVEI has a strong tendency toward the development of pilot enclaves in terms of its administrative, curricular,…

Personal protective equipment use among students with special health care needs reporting injuries in school-sponsored vocational, career, and technical education programs in New Jersey.

PubMed

Rubenstein, Eric; Shendell, Derek; Eggert, Brain C; Marcella, Stephen W

2014-01-01

Students with special health care needs (SHCNs) and individualized education plans (IEPs) may be injured more often in vocational, career, and technical education (CTE) programs. No research to date considers personal protective equipment (PPE) use among students with SHCNs in school-based programs reporting injuries to agencies. Data from 1999 to 2011 on PPE use among injured students in CTE programs in public schools and private secondary schools for the disabled were analyzed; students with SHCNs were distinguished by IEP status within New Jersey Safe Schools surveilance data. Among students with IEPs using PPE, 36% of injuries occurred to body parts PPE was meant to protect. Likely injury types were cuts-lacerations and burns for students with IEPs using PPE and cuts-lacerations and sprains for students with IEPs not using PPE. Females with IEPs using PPE were injured less often than males across ages. Results suggested students with SHCNs with IEPs need further job-related training with increased emphasis on properly selecting and fitting PPE.

The Effectiveness of Contextual Learning on Physics Achievement in Career Technical Education

NASA Astrophysics Data System (ADS)

Arcand, Scott Andrew

The purpose of this casual-comparative study was to determine if students being taught the Minnesota Science Physics Standards via contextual learning methods in Project Lead the Way (PLTW) Principles of Engineering or the PLTW Aerospace Engineering courses, taught by a Career Technical Education (CTE) teacher, achieve at the same rate as students in a physics course taught by a science teacher. The PLTW courses only cover the standards taught in the first trimester of physics. The PLTW courses are two periods long for one trimester. Students who successfully pass the PLTW Principles of Engineering course or the PLTW Engineering Aerospace course earn one-half credit in physics and one-half elective credit. The instrument used to measure student achievement was the district common summative assessment for physics. The Common Summative Assessment scores were pulled from the data warehouse from the first trimester of the 2013-2014 school year. Implications of the research address concepts of contextual learning especially in the Career Technical Education space. The mean score for Physics students (30.916) and PLTW Principles of Engineering students (32.333) was not statistically significantly different. Students in PLTW Principles of Engineering achieved at the same rate as students in physics. Due to the low rate of students participating in the Common Summative Assessment in PTLW Aerospace (four out of seven students), there is not enough data to determine if there is a significant difference in the Physics A scores and PLTW Aerospace Engineering scores.

Career and Technical Education as Pathways: Factors Influencing Postcollege Earnings of Selected Career Clusters

ERIC Educational Resources Information Center

Compton, Jonathan I.; Laanan, Frankie Santos; Starobin, Soko S.

2010-01-01

This study investigated the relationship between student characteristics such as gender, race/ethnicity, program of study, degree completion, and earnings outcomes for students enrolled in career and technical education (CTE) programs within the business, information technology (IT), and marketing career clusters in community colleges to determine…

MDRC's Career and Technical Education Projects. Issue Focus

ERIC Educational Resources Information Center

MDRC, 2017

2017-01-01

The past decade has seen a resurgence of interest in career and technical education (CTE) as a way to engage students, help people build the skills necessary to succeed in a technologically advanced economy, and meet employer demand for workers. MDRC--which has a two-decade history of developing and evaluating CTE programs, including their…

Students' Perception of Entrepreneurship and Enterprise Education in Oman

ERIC Educational Resources Information Center

Belwal, Rakesh; Al Balushi, Hanan; Belwal, Shweta

2015-01-01

Purpose: Universities and other higher educational institutions play an increasingly important role in providing entrepreneurship education, training, and technical assistance to existing and potential entrepreneurs. The purpose of this paper is to investigate students' perceptions of entrepreneurship and the role of universities in developing…

Field Testing Competency-Based Vocational Education Student Learning Guides Developed at Ridge Vocational-Technical Center. From August 1, 1981 to June 30, 1982. Final Report.

ERIC Educational Resources Information Center

Andreyka, Robert E.

This project's main objective was to field test competency-based vocational education (CBVE) student learning guides developed during 1979-1981 at Ridge Vocational-Technical Center (RVTC) (Florida). The learning guides were for six programs: clerical occupations, cosmetology, heavy duty truck/bus mechanics, industrial electricity, masonry, and…

World Wide Comparism of Technical and Vocational Education: Lessons for Nigerian Technical and Vocational Education Sector (I)

ERIC Educational Resources Information Center

Ayeni, Abiodun Olumide

2015-01-01

This paper compared technical/vocational education in: Germany, Australia, Finland, Hong Kong, Hungary, India, Japan, South Korea, Mexico, and Nigeria, and found that technical/vocational education was given proper attention in countries considered except Nigeria, where it was handled with laissez faire attitude. Set-Up of Technical/Vocational…

Subsistence Specialist First Class, 9-11. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This self-paced, individualized course, adapted from military curriculum materials for use in vocational and technical education, teaches students about the basic training and supervisory techniques required for proper sanitation of food service personnel and kitchen and dining facility equipment. This student workbook, one of three parts of the…

Assessing Students' Technical Skill Attainment

ERIC Educational Resources Information Center

Jorgensen, Haley

2010-01-01

The Wisconsin Technical College System (WTCS) is working to comply with the Carl D. Perkins Career and Technical Education Improvement Act of 2006 (Perkins) to ensure that its graduates have mastered the technical skills needed by business and industry. The legislation requires that each state identify and approve program assessment strategies…

The Effects of Curriculum Integration on the Academic Achievement of Secondary Career and Technical Students

ERIC Educational Resources Information Center

Jones, Patricia Anders

2012-01-01

Using a causal-comparative design, this quantitative study investigated whether or not the curriculum integration of academic subjects with career and technical education classes affected secondary students' academic performance as assessed by scores on standardized tests. The purposive sample was drawn from students in Trade and Industry classes…

Sense of Community in Student Retention at a Tertiary Technical Institution in Bogotá: An Ecological Approach

ERIC Educational Resources Information Center

Mendoza, Pilar; Suarez, Juan Diego; Bustamante, Eileen

2016-01-01

Objective: This study probes the reasons for high attrition rates and sense of community among students enrolled at a technical institution serving low-income students in Bogotá, Colombia. Although sense of community on campus is the strongest predictor of a student's thriving, scholars in higher education have studied mainly minority students'…

Vocational-Technical Education Financial Study. Executive Summary.

ERIC Educational Resources Information Center

Indiana State Board of Vocational and Technical Education, Indianapolis.

A review of Indiana's current system of financing public vocational-technical education was limited to these concerns: the resource needs of vocational-technical education to keep the current delivery system up-to-date and the resources necessary to expand vocational-technical education services to those not being served. Although the current…

Self-Study as an Emergent Methodology in Career and Technical Education, Adult Education and Technology: An Invitation to Inquiry

ERIC Educational Resources Information Center

Hawley, Todd S.; Hostetler, Andrew L.

2017-01-01

In this manuscript, the authors explore self-study as an emerging research methodology with the potential to open up spaces of inquiry for researchers, graduate students, and teachers in a broad array of fields. They argue that the fields of career and technical education (CTE), adult education and technology can leverage self-study methodology in…

WHOLE SYSTEMS, INTEGRATED SITE DESIGN FOR EDUCATION (WISE) WEBSITE: AN INTERACTIVE WEBSITE FOR EDUCATORS AND STUDENTS

EPA Science Inventory

Technical Challenge to Sustainability: Students who engage with their environment develop values that promote sustainability and perform better on standardized tests [1]. While there are many websites that focus on sustainability education and students, there is no in...

Handling the Difficulties of Technical School Students in the Construction and Interpretation of Graphic Representations

ERIC Educational Resources Information Center

Marinos, Andreas

2010-01-01

In this work, an attempt is made to evaluate the errors that have to do with the interpretation and construction of graphic representations. Although the students are studying in the second year of technical high school (secondary education), i.e. in schools with an emphasis in technical subjects (post junior secondary), it is observed that they…

Meeting the Needs of Career and Technical Education: Observations from Graduates of a High School Health Science Program

ERIC Educational Resources Information Center

Avey, Matthew R.

2012-01-01

Career and Technical education has been around for some time, and has often been shaped by the current economic landscape of the country. While current evolving trends focus on relevance for students in the school setting, a coexistence with college preparation curriculum is now the new trend in modern technical education. New programs have…

Making geoscience education accessible for students who are blind and visually impaired

NASA Astrophysics Data System (ADS)

Charlevoix, D. J.; Berg, M.; Morris, A. R.; Olds, S. E.

2011-12-01

UNAVCO is NSF's geodetic facility and operates as a university-governed consortium dedicated to facilitating geoscience research and education, including the support of EarthScope. The Education and Community Engagement program at UNAVCO provides support for broader impacts both externally to the broader University and EarthScope community as well as internally to the UNAVCO. During the first 10 years of EarthScope UNAVCO has engaged in outreach and education activities across the EarthScope footprint ranging from outreach to formal and informal educators and interpreters, to technical training for university faculty and researchers. UNAVCO works jointly with the EarthScope National Office and IRIS while simultaneously maintaining and developing an independent engagement and education program. UNAVCO provides training in the form of technical short courses to researchers including graduate students and early-career professionals, and conducts educational workshops for K-12 educators. A suite of educational materials focused on the integration of EarthScope data into curriculum materials is available from UNAVCO and will soon expand the undergraduate offerings to include a broader suite of geodesy applications activities for undergraduate students. UNAVCO provides outreach materials and in support of EarthScope including summaries of research project and campaign highlights, science snapshots featuring summaries of scientific advancements made possible by UNAVCO services and non-technical communications via social media. UNAVCO also provides undergraduate students exposure to EarthScope science research participation in a year-long research internship managed by UNAVCO (Research Experiences in Solid Earth Science for Students - RESESS).

Perceptions of Postsecondary Career and Technical Education: A Q Method Examination

ERIC Educational Resources Information Center

Kandalec, Katherine Rae

2016-01-01

High school counselors are considered key decision influencers for students in the college search stage. The purpose of the study was to identify the perceptions currently held among public school counselors in the state of North Carolina towards postsecondary career and technical education. Q methodology, which provides an opportunity to study…

School-Based Curriculum Development in Career and Technical Education in Taiwan, Republic of China.

ERIC Educational Resources Information Center

Wu, Robert T. Y.

In Taiwan, technological and vocational education (TVE) the equivalent of career and technical education in the United States has undergone several political and social changes and is poised for applying school-based curriculum development (SBCD). Three reasons for adopting SBCD are planning of an integrated curriculum, concept of student-centered…

Technical Standards for Nursing Education Programs in the 21st Century.

PubMed

Ailey, Sarah H; Marks, Beth

The Institute of Medicine (2000, 2002) exposed serious safety problems in the health system and called for total qualitative system change. The Institute of Medicine (2011, 2015) also calls for improving the education of nurses to provide leadership for a redesigned health system. Intertwined with improving education is the need to recruit and retain diverse highly qualified students. Disability is part of diversity inclusion, but current technical standards (nonacademic requirements) for admission to many nursing programs are a barrier to the entry of persons with disabilities. Rehabilitation nurse leaders are in a unique position to improve disability diversity in nursing. The purpose of this paper is to discuss the importance of disability diversity in nursing. The history of existing technical standards used in many nursing programs is reviewed along with examples. On the basis of the concept that disability inclusion is a part of diversity inclusion, we propose a new model of technical standards for nursing education. Rehabilitation nurse leaders can lead in eliminating barriers to persons with disabilities entering nursing.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 40: Technical communications in aerospace education: A study of AIAA student members

NASA Technical Reports Server (NTRS)

Kennedy, John M.; Pinelli, Thomas E.; Barclay, Rebecca O.

1994-01-01

This paper describes the preliminary analysis of a survey of the American Institute of Aeronautics and Astronautics (AIAA) student members. In the paper we examine (1) the demographic characteristics of the students, (2) factors that affected their career decisions, (3) their career goals and aspirations, and (4) their training in technical communication and techniques for finding and using aerospace scientific and technical information (STI). We determine that aerospace engineering students receive training in technical communication skills and the use of STI. While those in the aerospace industry think that more training is needed, we believe the students receive the appropriate amount of training. We think that the differences between the amount of training students receive and the perception of training needs is related partially to the characteristics of the students and partially to the structure of the aerospace STI dissemination system. Overall, we conclude that the students' technical communication training and knowledge of STI, while limited by external forces, makes it difficult for students to achieve their career goals.

[Evaluation of the lifestyle of students of physiotherapy and technical & computer science basing on their diet and physical activity].

PubMed

Medrela-Kuder, Ewa

2011-01-01

The aim of the study was the evaluation of a dietary habits profile and physical activity of Physiotherapy and Technical & Computer Science students. The research involved a group of 174 non-full-time students of higher education institutions in Krakow aged between 22 and 27. 81 students of the surveyed studied Physiotherapy at the University of Physical Education, whereas 93 followed a course in Technical & Computer Science at the Pedagogical University. In this project a diagnostic survey method was used. The study revealed that the lifestyle of university youth left much to be desired. Dietary errors were exemplified by irregular meals intake, low consumption of fish, milk and dairy, snacking between meals on high calorie products with a poor nutrient content. With regard to physical activity, Physiotherapy students were characterised by more positive attitudes than those from Technical & Computer Science. Such physical activity forms as swimming, team sports, cycling and strolling were declared by the surveyed the most frequently. Health-oriented education should be introduced in such a way as to improve the knowledge pertaining to a health-promoting lifestyle as a means of prevention of numerous diseases.

Cook, 9-5. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, which was adapted from military curriculum materials for use in vocational and technical education, provides training in both the theoretical and practical phases of cooking for students who want to become semiskilled (apprentice) cooks. The theory portion of the course is intended for the classroom, not the laboratory. The course is…

The Impact of Career and Technical Education on Native American Males

ERIC Educational Resources Information Center

Neilson, Brent Alan

2016-01-01

The results of this qualitative descriptive study provide insight into the impact Career and Technical Education has on Native American male students in Northern Arizona. This study was created in response to the lack of research, especially qualitative research in this area. Moreover, it provided Native youth an opportunity to share their stories…

A Replication of the Technical Adequacy of the Student Subjective Wellbeing Questionnaire

ERIC Educational Resources Information Center

Renshaw, Tyler L.

2015-01-01

The present study reports on a replication of the technical adequacy of the Student Subjective Wellbeing Questionnaire (SSWQ), which is a 16-item self-report instrument for assessing youth's academic efficacy, educational purpose, joy of learning, and school connectedness, with a sample of adolescents in Grades 6 to 7 (N = 438). Findings confirmed…

Medical Laboratory Technician--Chemical Chemistry & Urinalysis, 10-2. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This publication, the last of three course materials in the medical laboratory technician field adapted from the Military Curriculum Materials for Use in Technical and Vocational Education series, was designed as a refresher course for student self-study and evaluation. It can be used by advanced students or beginning students participating in a…

Entomology Specialist 1-1. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Jones, Jimmie L.

This individualized, self-paced course for training an entomology specialist was adapted from military curriculum materials for use in vocational and technical education. Completion of the course should provide students with basic information needed to accomplish the following duties of an entomology specialist: perform entomological work, apply…

Postsecondary Student Terminology: A Handbook of Terms and Definitions for Describing Students in Postsecondary Education.

ERIC Educational Resources Information Center

Putnam, John F.

A handbook of terms and definitions for describing students in postsecondary education includes technical and vocational schools as well as various forms of adult education and nontraditional study. Input was gathered from 40 national organizations and 29 federal agencies; 20 organizations and agencies provided field test sites. The guide's…

Student Flow Model SFM-IA: System Documentation. Technical Report 41B. Preliminary Edition.

ERIC Educational Resources Information Center

Busby, John C.; Johnson, Richard S.

Technical specifications, operating procedures, and reference information for the National Center for Higher Education Management Systems' (NCHEMS) Student Flow Model (SFM) computer programs are presented. Included are narrative descriptions of the system and its modules, specific program documentation for each of the modules, system flowcharts,…

A Profile of Minnesota Technical College Students.

ERIC Educational Resources Information Center

Human Capital Research Corp., Chicago, IL.

A 3-year longitudinal survey of more than 8,000 Minnesota technical college students drawn from 34 campuses across the state was commissioned by the chancellor of the Minnesota State Board of Technical Colleges. The survey, begun in July 1992 and conducted in multiple waves, achieved response rates of 65% to 70% from younger students and their…

A qualitative study of student perspectives and experiences in an information technology education program

NASA Astrophysics Data System (ADS)

Choi, Heekyung

2009-12-01

The purpose of this study is to learn about students' perspectives of an undergraduate level information technology (IT) education program. The IT program is a recent effort to create a new educational opportunity for computing in college, with recognition that the recent IT developments have had a greater influence on various aspects of people's lives than ever. Students' perspectives are a necessary piece of information to develop this innovative IT education program into a sound educational opportunity. Data were gathered through qualitative in-depth interviews conducted with 28 undergraduate students, most of whom have taken one or more IT classes before. The interview data were analyzed using the grounded theory approach. The analysis found that college students perceived that they were very competent in dealing with IT primarily due to their continued exposure to computers since youth. However, this perceived competency was not very stable. Students felt that they did not have sufficient IT competency when technical skills of dealing with IT came to attention. They also felt so when comparing their IT competency with that of their peers, examining it in a class context, and confronting a transition from education to the real world. In spite of their preference for and confidence in self-guided learning, students wanted to receive a formal instruction in IT when they needed to learn something difficult, something that they were not very interested in, and something important for their future lives. They also expressed a desire to gain a comprehensive understanding of computers without needing to learn fundamental computing principles. Students' various interests in IT education were dispersed around learning practical technical skills and understanding social implications of IT. Many participants' focus was a mix of the two factors, which was often expressed as an area that dealt with "how humans and computers interact." This blended interest suggested a

Developing a Template for Electronic Portfolios in Career and Technical Education

ERIC Educational Resources Information Center

Fowler, Matthew

2012-01-01

The purposes of this multiple case study were to determine if manufacturing and services sector employers found value in the use of an ePortfolio in the hiring process, and to develop a suggested template for an ePortfolio format to be used within career and technical education. Electronic portfolios "allow students to showcase their…

Gender, Career and Technical Education (CTE) Nontraditional Coursetaking, and Wage Gap

ERIC Educational Resources Information Center

Fluhr, Stephanie A.; Choi, Namok; Herd, Ann; Woo, Hongryun; Alagaraja, Meera

2017-01-01

The two main objectives of this study were to examine the relationship between high school student (9th-12th) gender and nontraditional career and technical education (CTE) course taking, and the combined effects of gender and program area on estimated future wage earnings for male and female CTE completers. A Midwestern state CTE database…

On-Time Graduation of Career and Technical Education Concentrators in Arizona

ERIC Educational Resources Information Center

Jaime, Laura Eileen

2017-01-01

The purpose of this quantitative causal-comparative study was to examine the effect that Career and Technical Education (CTE) concentrators, non-CTE concentrators and academic concentrators have on the on-time graduation of 1035 high school students in 7 high schools in Arizona for the 2015--2016 school year. There were three research questions…

A Comparative Study of Students’ Track and Field Technical Performance in Sport Education and in a Direct Instruction Approach

PubMed Central

Pereira, José; Hastie, Peter; Araújo, Rui; Farias, Cláudio; Rolim, Ramiro; Mesquita, Isabel

2015-01-01

This study examined students’ technical performances improvements in three track and field events (hurdles, shot put, and long jump) following either a Sport Education season or a Direct Instruction unit. An experienced Physical Education teacher taught two classes totalling 47 sixth-grade students (25 boys and 22 girls, aged between 10 and 13 years old) in 20, 45-minute lessons over 10 weeks. The students’ technical performances were analysed and evaluated through systematic observation of videos. The Wilcoxon signed-rank test was used to compare scores at three time points (pre-test, post-test and retention), and the Mann-Whitney U test was used to examine the differences within each instructional model at each assessment moment, as well as by gender and skill level. The impact of each instructional model in student learning was markedly distinct. While in Sport Education students of both genders and skill levels improved significantly in all events, in Direct Instruction, evidence of significant improvements was limited to boys and students of higher skill level. Key points The impact of each teaching approach in student learning was distinct. While in Sport Education the technical performance improvements spread throughout students of both genders and skill levels, in Direct Instruction significant improvements were exclusive to boys and students of higher skill level. The extended analysis in the current study, taking into account student gender and skill level, permitted a more comprehensive measure of the learning impact of the two approaches. More sophisticated analyses of the tasks and instructional strategies of each approach are encouraged. PMID:25729299

Marshalling Corporate Resources for Public and K-12 Technical Education Outreach and Engagement

NASA Astrophysics Data System (ADS)

Wynne, James

2011-03-01

In 1988, the Education Task Force of the Business Roundtable recommended that American corporations invest in pre-college education. Prior to that date, corporate investment was targeted at higher education. IBM and other corporations responded by encouraging their employees and their corporate philanthropic organizations to develop programs aimed at enhancing pre-college education. The IBM TJ Watson Research Center initiated a Local Education Outreach program, active for these past 23 years, that marshals the resources of our science-rich institution to enhance STEM education in our local schools. We have broad and deep partnerships between the Research Center and local school districts, including New York City. We have just completed our 19th consecutive year of Family Science Saturdays, which brings 4th and 5th grade children, along with their parents, to our Research Center for hands-on workshops in topics like States of Matter, Polymer Science, Kitchen Chemistry, and Sound and Light. The workshops are staffed by IBM volunteers, assisted by local high school student ``Peer Teachers.'' Since 1990, the IBM Corporation has joined with a coalition of other companies, professional engineering societies, and government agencies to sponsor the annual Engineers Week (EWeek) campaign of technical education outreach, serving as Corporate Chair in 1992, 2001, and 2008. In recent years, we have annually recruited around 5000 IBM volunteers to reach out to more than 200,000 K-12 students in order to increase their awareness and appreciation of technical careers and encourage them to continue their studies of STEM (science, technology, engineering, and mathematics). The speaker, who helped found the APS Forum on Education (FED) and served as FED Councillor for 8 years, will review these and other programs for Public and K-12 Technical Education Outreach and Engagement.

Expanding Opportunities: Postsecondary Career and Technical Education and Preparing Tomorrow's Workforce. A Position Paper

ERIC Educational Resources Information Center

Visger, Brett

2007-01-01

With nearly a third of all students in for-credit postsecondary education enrolled in career and technical education (CTE) programs, CTE is a valuable partner in moving reform efforts forward at the postsecondary level by providing leadership in pedagogy as well as systems-building and economic development. This enables CTE to play the role of…

Why Do Students Leave? Leaving Vocational Education and Training with no Recorded Achievement

ERIC Educational Resources Information Center

Callan, Victor

2005-01-01

This report investigates the characteristics and motivations of vocational education and training (VET) students who do not complete the training course they enroll in. The project interviewed students with no recorded achievement, spoke to technical and further education (TAFE) teachers and administrators about this issue, and also through a…

The Involvement of Career and Technical Education Advisory Committees in Modularizing Curriculum

ERIC Educational Resources Information Center

Malosh, Ann M.

2012-01-01

The emergence of modularized curriculum in community college career and technical education (CTE) programs has received substantial attention over the last decade, with researchers suggesting that this type of curriculum redesign may assist with student retention and success. The purpose of this study was to describe advisory committee member…

Should Technical Education Be More Liberal?

ERIC Educational Resources Information Center

Heckman, Richard T.

Due to the increasing emphasis on technology and the trend toward downsizing and multiculturalism in today's workplace, graduates of technical education programs need non-technical thinking and problem solving skills to stay successfully employed. Historically, however, a dichotomy has existed between vocational and liberal education, which has…

Motivation and Student Success in Developmental Education

ERIC Educational Resources Information Center

Livingston, Shannon

2017-01-01

Using self-determination theory (Deci & Ryan, 1985) as the theoretical framework, this study explored how high-school GPA and motivation contributed to academic performance and persistence among students enrolled in developmental-education courses during the fall of 2016 at a two-year technical college in the Midwest. A non-random purposive…

"They're Not Keeping a Journal of Feelings": Literacy Initiatives and Career and Technical Education

ERIC Educational Resources Information Center

Kohnen, Angela M.

2015-01-01

Career and Technical Education (CTE) centers offer an opportunity for students to engage in authentic reading and writing activities. In many states, "embedding" English and math credits (i.e., allowing students to earn traditional core subject credits in the context of their CTE programs) has become a popular trend. This article reports…

Construction Surveying, 3-27. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This short course on construction surveying was developed from military curriculum materials for use in technical and vocational education programs. Students completing the course should be able to perform engineering surveys related to area and route surveying (knowledge of basic survey techniques is a prerequisite). The course is divided into…

The Evaluations of the College Students' Perceptions on Distance Education from the Point of the Technical and Educational Factors

ERIC Educational Resources Information Center

Gok, Tolga

2015-01-01

The purpose of the research was to investigate the college students' opinions about distance education courses. The distance education questionnaire (DEQ) was developed for evaluating the perceptions of the students. The DEQ was conducted on 66 college students enrolled in the compulsory courses. The DEQ consisted of 18 items and two factors…

Selling Technical Sales to Engineering Learners

ERIC Educational Resources Information Center

Bumblauskas, Daniel P.; Carberry, Adam R.; Sly, David P.

2017-01-01

Sales engineering or technical sales programs bridge engineering and business to educate engineering students in sales specific to their discipline. Students develop business awareness through such programs, providing the sales workforce with technically knowledgeable salespeople. The following study analyzed cohorts of students enrolled in a…

Technical and Vocational Education and Training in Peace Education: Solomon Islands

ERIC Educational Resources Information Center

Maebuta, Jack

2011-01-01

Technical and vocational education and training programs as a form of peace education are examined in this paper. It explores the notion of educating for a culture of peace through refocusing technical and vocational education and training programs on sustainable community development in the Solomon Islands. It further highlights the policy and…

Student Displacement in Louisiana after the Hurricanes of 2005: Experiences of Public Schools and Their Students. Technical Report

ERIC Educational Resources Information Center

Pane, John F.; McCaffrey, Daniel F.; Tharp-Taylor, Shannah; Asmus, Gary J.; Stokes, Billy R.

2006-01-01

The purpose of this technical report is to provide timely documentation of many of the short-term effects of the movements of students that occurred as part of the displacement of storm victims. The report will help guide educators and policymakers in their ongoing responses to this disaster and preparations for future events. Focusing on the…

Funding Sources for Visually Impaired Students in Higher Education.

ERIC Educational Resources Information Center

Traber, M.

1987-01-01

Financial aid sources available to visually handicapped students for postsecondary educational, vocational, or technical programs are outlined. Sources include national and state blindness agencies, colleges and universities, state vocational rehabilitation agencies, and the federal government. (Author/JDD)

Funding Your Education: The Guide to Federal Student Aid, 2012-13

ERIC Educational Resources Information Center

US Department of Education, 2011

2011-01-01

Every student, who meets some basic eligibility requirements, can get some type of financial aid regardless of age or family income. Federal student aid is a financial aid from the federal government to help a student pay for education expenses at an eligible college, technical school, vocational school, or graduate school. There are three…

Technical Education: Careers Unlimited. Proceedings of The National Clinic on Technical Education (9th, Fort Worth, Texas, March 15-17, 1972).

ERIC Educational Resources Information Center

American Technical Education Association, Inc., Delmar, NY.

The Proceedings, attended by more than 400 technical educators from 42 States and two foreign countries, reflected various topics and information relative to the Clinic's theme. The speeches should assist technical educators and administrators at all post-secondary levels in the preparation of future manpower needs in technical education. The…

Construction Mechanic, Engine Tune-Up I, 8-7. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, teaches students to perform a complete engine tune-up using appropriate hand tools, special tools, and testing equipment. Students completing the course will be able to diagnose gasoline-engine performance and perform corrective measures to…

Teaching audience analysis to the technical student

NASA Technical Reports Server (NTRS)

Debs, M. B.; Brillhart, L. V.

1981-01-01

Teaching audience analysis, as practiced in a technical writing course for engineering students, is discussed. Audience analysis is described as the task of defining the audience for a particular piece of writing and determining those characteristics of the audience which constrain the writer and effect reception of the message. A mature technical writing style that shows the tension produced when a text is written to be read and understood is considered in terms of audience analysis. Techniques include: (1) conveying to students the concept that a reader with certain expectations exist, (2) team teaching to preserve the context of a given technical discipline, and (3) assigning a technical report that addresses a variety of readers, thus establishing the complexity of audience oriented writing.

Figures and First Years: Examining first-year Calculus I student ability to incorporate figures into technical reports

NASA Astrophysics Data System (ADS)

Antonacci, Nathan; Rogers, Michael; Pfaff, Thomas

This three-year study focused on first-year Calculus I students and their abilities to incorporate figures into technical reports. Students were handed guidelines as part of their Multidisciplinary Sustainability Education Module meant to aid them in crafting effective figures. Figure-specific questionnaires were added in the class to gain insight into the quantitative literacy skills students possessed both before starting their course and after its completion. Reviews of the figures in 78 technical reports written by 106 students showed repeated failure to refer to figures in discussion sections and use them in evidence-based arguments. Analysis of quantitative literacy skills revealed that the students could both read and interpret figures, suggesting that issues with literacy were not the main contributor to the sub-par graphs.

Ripples and Breaks: Reflecting on Learning Ecologies in Career and Technical Education

ERIC Educational Resources Information Center

Jocson, Korina M.

2016-01-01

In this paper, the author reflects on a year-long ethnography to point out contextual factors situated in career and technical education (CTE) and specifically how a CTE teacher and a university researcher shaped learning opportunities to support students' interests in the arts, technology, and multimedia communications. The discussion arched by a…

Evaluating the Effectiveness of the Utah Career and Technical Education Introduction Course

ERIC Educational Resources Information Center

Spielmaker, Debra Marie

2013-01-01

This quantitative study evaluated the gains and evaluation outcomes of the compulsory Career and Technical Education (CTE) Introduction course. All Utah public school seventh-grade students are required to enroll in this school-year course. The matched-pair design used preexisting data to analyze 6,078 pre-and postsurvey responses collected at the…

Research Needs: Career and Technical Education

ERIC Educational Resources Information Center

Kosloski, Michael F., Jr.; Ritz, John M.

2016-01-01

Research is an important component of each professional field. This study sought to determine topics that needed further research in the school subjects known as career and technical education. It determined topics that needed to be researched related to high school career and technical education (CTE) and the preparation for teaching CTE in…

Dallas County Community College District Summary of Technical Education Follow-Up Survey (May 1998-August 1999 Graduates/Certificate Completers).

ERIC Educational Resources Information Center

Dallas County Community Coll. District, TX.

A survey of 509 technical education students who had graduated or completed a certificate from the Dallas County Community College District (DCCCD) between May 1998 and August 1999 identified students' primary educational goals while attending DCCCD as: (1) earning a two year degree (48%); (2) improving skills in a current job and/or getting a…

Evaluation of Factors that Contribute to Improving Academic Achievement of Career and Technical Education Students in Rhode Island

ERIC Educational Resources Information Center

Marsella, Anthony J.

2010-01-01

The primary purpose of this study was to gain a deeper understanding of career and technical education in Rhode Island utilizing Program Approval Process: Standards, Instruments, and Protocols. The process establishes standards for quality career and technical education. The population surveyed provided data on Standard Two: Curriculum and…

Developing Entrepreneurial Competence among Minnesota's Technical Institute Students.

ERIC Educational Resources Information Center

Minnesota State Council on Vocational Technical Education, St. Paul.

Following up a 1987 study that had identified 1,169 entrepreneurial graduates of Minnesota's technical institutes from the 10-year time period prior to 1984, a study was conducted to determine how Minnesota's technical institutes presently promote entrepreneurial competence for their students and how they can help future students. Questionnaires…

Educational Experiences of Embry-Riddle Students through NASA Research Collaboration

NASA Technical Reports Server (NTRS)

Schlee, Keith; Chatman, Yadira; Ristow, James; Gangadharan, Sathya; Sudermann, James; Walker, Charles

2007-01-01

NASA's educational programs benefit students while increasing the overall productivity of the organization. The NASA Graduate Student Research Program (GSRP) awards fellowships for graduate study leading to both masters and doctoral degrees in several technical fields, while the Cooperative Education program allows undergraduate and graduate students the chance to gain work experience in the field. The Mission Analysis Branch of the Expendable Launch Vehicles Division at NASA Kennedy Space Center has utilized these two programs with students from Embry-Riddle Aeronautical University to conduct research in modeling and developing a parameter estimation method for spacecraft fuel slosh using simple pendulum analogs. Simple pendulum models are used to understand complicated spacecraft fuel slosh behavior. A robust parameter estimation process will help to identiFy the parameters that will predict the response fairly accurately during the initial stages of design. NASA's Cooperative Education Program trains the next wave of new hires while allowing graduate and undergraduate college students to gain valuable "real-world" work experience. It gives NASA a no risk capability to evaluate the true performance of a prospective new hire without relying solely on a paper resume, while providing the students with a greater hiring potential upon graduation, at NASA or elsewhere. In addition, graduate students serve as mentors for undergrad students and provide a unique learning environment. Providing students with a unique opportunity to work on "real-world" aerospace problems ultimately reinforces their problem solving abilities and their communication skills (in terms of interviewing, resume writing, technical writing, presentation, and peer review) that are vital for the workforce to succeed.

Vocational and Technical Education Performance Standards and Competencies.

ERIC Educational Resources Information Center

Connecticut State Board of Education, Hartford.

These Connecticut vocational and technical performance standards and competencies are a guide for overall quality attainment in these seven vocational and technical program areas: agricultural science technology education; business and finance technology education; cooperative work education; family and consumer sciences education; marketing…

The needs analysis of learning Inventive Problem Solving for technical and vocational students

NASA Astrophysics Data System (ADS)

Sai'en, Shanty; Tze Kiong, Tee; Yunos, Jailani Md; Foong, Lee Ming; Heong, Yee Mei; Mohaffyza Mohamad, Mimi

2017-08-01

Malaysian Ministry of Education highlighted in their National Higher Education Strategic plan that higher education’s need to focus adopting 21st century skills in order to increase a graduate’s employability. Current research indicates that most graduate lack of problem solving skills to help them securing the job. Realising the important of this skill hence an alternative way suggested as an option for high institution’s student to solve their problem. This study was undertaken to measure the level of problem solving skills, identify the needs of learning inventive problem solving skills and the needs of developing an Inventive problem solving module. Using a questionnaire, the study sampled 132 students from Faculty of Technical and Vocational Education. Findings indicated that majority of the students fail to define what is an inventive problem and the root cause of a problem. They also unable to state the objectives and goal thus fail to solve the problem. As a result, the students agreed on the developing Inventive Problem Solving Module to assist them.

Credit Quandaries: How Career and Technical Education Teachers Can Teach Courses That Include Academic Credit. Ask the Team

ERIC Educational Resources Information Center

Jacques, Catherine

2014-01-01

Many career and technical education (CTE) courses not only provide students with vocational and technical skills and knowledge, but engage them in academic content as well. Designed thoughtfully, these courses can address rigorous academic content standards and be as intellectually demanding as traditional academic courses (Southern Regional…

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

ERIC Educational Resources Information Center

Selwitz, Jason Lawrence

2017-01-01

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum…

Career and Technical Education in High School: Does It Improve Student Outcomes?

ERIC Educational Resources Information Center

Dougherty, Shaun M.

2016-01-01

Until the late 1990s, "vocational education" in traditional trades such as carpentry, cosmetology, and auto mechanics was often the presumptive high school placement for low-performing students considered ill-suited for college. However, in the past two decades, policymakers and educators have reconsidered what is now referred to as…

Vocational and Technical Education.

ERIC Educational Resources Information Center

Compact, 1968

1968-01-01

Volume 2, Issue 3 of "Compact" was designed to point out the problems and potential of vocational-technical education and to offer some suggestions for action. Major content includes: (1) "Education for Twenty-First Century Employment," by Wayne Morse, (2) "Pending Federal Legislation Encourages Vocational Innovation," by Grant Venn, (3)…

Administrators' Perceptions of Career and Technical Education

ERIC Educational Resources Information Center

Haussman, Charles E.

2012-01-01

Career and technical education was founded on the common practice of apprenticeships integrated into the public schools at the beginning of the 20th century as manual arts, which continued to evolve into a culture and practice of its own as vocational education, and into what is now career and technical education, with an evolving focus on college…

Knowledge and awareness of HIV/AIDS among students of a technical institution.

PubMed

Gupta, Prem Prakash; Verma, Rohit Kumar; Tripathi, Poonam; Gupta, Shruti; Pandey, Awanish Kumar

2015-08-01

Acquired immunodeficiency syndrome (AIDS) is a major health problem worldwide. The number of infected people is increasing daily. Knowledge and awareness toward prevention and control of the disease is necessary among both educated and illiterate people. This study is aimed at assessing the knowledge and awareness about human immunodeficiency virus (HIV)/AIDS among undergraduate students studying in a technical institute in Gorakhpur, Uttar Pradesh, India. A community-based cross-sectional study was conducted among youths aged 15-30 years studying in a technical institution in Gorakhpur. Data were collected using a semistructured questionnaire developed with the help of existing literature, from 250 participants (students). The main source of information was the television; knowledge about the difference between HIV/AIDS was satisfactory. The findings showed that the knowledge about modes of prevention (blood checkup, needle/syringe sterilization) was satisfactory. There were several misconceptions about the modes of transmission of the disease, such as through mosquito bites, eating/drinking, and kissing. The knowledge of the study population was satisfactory, and there is a need for innovation and comprehensive education to impart better knowledge and understanding about HIV/AIDS.

Search and Rescue Aircrewman/HH3F Avionics, 2-11. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This self-paced, individualized course, adapted from military curriculum materials for use in vocational and technical education, teaches students the skills needed to become a qualified avionics worker and aircrew rescuer on the HH-3F helicopter. The course materials consist of four pamphlets: two student workbooks and two student syllabuses. The…

Medical Laboratory Technician--Hematology, Serology, Blood Banking & Immunohematology, 10-4. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, the third of three courses in the medical laboratory technician field adapted from military curriculum materials for use in vocational and technical education, was designed as a refresher course for student self-study and evaluation. It is suitable for use by advanced students or beginning students participating in a supervised…

Developing Technical Skill Assessments

ERIC Educational Resources Information Center

Hyslop, Alisha

2009-01-01

One of the biggest challenges facing the career and technical education (CTE) community as it works to implement the 2006 Perkins Act is responding to more rigorous requirements for reporting on CTE students' technical skill attainment. The U.S. Department of Education suggested in non-regulatory guidance that states and locals use the number of…

Psychiatry Ward Specialist, 10-12. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, is designed to train students to perform as assistants to professional personnel in the care and treatment of patients in mental health units. It includes basic concepts of human behavior, the aspects of atypical adjustive reactions, the…

Sheet Metal Specialist 13-1. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Chanute AFB Technical Training Center, IL.

This course, adapted from military curriculum materials for use in vocational and technical education, provides training in the theory and practice of sheet metal work. Designed for student self-instruction (such as a correspondence course), the text consists of four volumes. Volume 1 discusses shop mathematics, measurement and layout tools,…

Integrated Basic Education and Skills Training (I-BEST). Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2014

2014-01-01

Washington's Integrated Basic Education and Skills Training Program (I-BEST) quickly teaches students literacy, work, and college-readiness skills so they can move through school and into living wage jobs faster. Pioneered by Washington's community and technical colleges, I-BEST uses a team-teaching approach to combine college-readiness classes…

Identifying Mental Health Elements among Technical University Students Using Fuzzy Delphi Method

NASA Astrophysics Data System (ADS)

Pua, P. K.; Lai, C. S.; Lee, M. F.

2017-08-01

Mental health is a part of our daily life that is often experienced. As a student, mental health issue often encounters a variety of difficult challenges at the higher education institution. A student with good mental health can handle and cope the normal stress of life, capable work productivity, enhance academic performance and able to make contribute to the community. However, rapidly transformation and changing of society have been impacted on students’ mental health, and it will be deteriorated and negatively impact on students if it absence of preventive controlled. This study aimed to identify the element of mental health among the technical university students. A total of 11 experts were selected to analyze the fuzziness consensus of experts. All collected data was analyzed by using the fuzzy Delphi method and the result shows that there are 4 elements of 8 elements that fulfill the requirement consensus of experts, which threshold value is equal and less than 0.2, the percentage of the expert group is more than 75%. The four elements were depression, anxiety, stress, and fear are often experienced by technical university students. In conclusion, precocious actions have to be taken by university and counseling center, parents and non-government organization in order to mitigate the mental health problem faced by students to improve the quality lifestyle students at the university.

Vicarious Violence on the Screen: A Challenge to Educators and Families. Technical Assistance Bulletin No. 16. [Updated Version].

ERIC Educational Resources Information Center

Hepburn, Mary A.

This technical bulletin poses questions of concern to law-related educators (LRE) and citizenship educators working to reduce violence among students and the larger community. Maintaining that the sociological implications of violence on television and in video games should be a serious concern to all educators, the bulletin describes the…

Helping Students to Prepare a Technical Communications Portfolio.

ERIC Educational Resources Information Center

Ware, Elaine

1988-01-01

Stresses the importance of teaching prospective technical writers to develop, organize, and present a technical communications portfolio. Provides a checklist on portfolio construction for students. (ARH)

Impact of Entrepreneurship Education on the Entrepreneurial Intentions of Students in Technical and Vocational Education and Training Institutions (TVET) in Malaysia

ERIC Educational Resources Information Center

Ibrahim, Wan Nur Azlina; Bakar, Ab. Rahim; Asimiran, Soaib; Mohamed, Shamsiah; Zakaria, Noor Syamilah

2015-01-01

The purpose of this study was to determine the entrepreneurial intention level of vocational and technical students in Malaysia. A total of 289 final year students who were enrolled at two different TVET institutions (community colleges and National Youth and Skills Institutes) were chosen to participate in the study. The findings indicated that…

Government-Funded Students and Courses, 2016. Australian Vocational Education and Training Statistics

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2017

2017-01-01

This publication provides a summary of data relating to students, programs, subjects and training providers in Australia's government-funded vocational education and training (VET) system (defined as all Commonwealth and state/territory government-funded training delivered by technical and further education [TAFE] institutes, other government…

Financing Technical and Vocational Education: Modalities and Experiences.

ERIC Educational Resources Information Center

German Foundation for International Development (DSE), Bonn (Germany).

The two papers in this document explain various options and modalities for UNEVOC (International Project on Technical and Vocational Education) Member States' financing of their individual systems of technical and vocational education and disseminating experiences in this area. "Financing Vocational Education and Training in Developing…

Understanding Participation in Secondary Career and Technical Education in the 21st Century: Implications for Policy and Practice

ERIC Educational Resources Information Center

Aliaga, Oscar A.; Kotamraju, Pradeep; Stone, James R., III

2014-01-01

We examine participation in Career and Technical Education (CTE) using a typology that better reflects the CTE credit-taking experience of all public high school students, and it is based on the several changes in academic requirements that all students need to meet in order to graduate, including those considered CTE students. We argue that the…

Leadership Skills among Technical and Vocational Educators

ERIC Educational Resources Information Center

Zakaria, Nurazyan Zahidah; Jizat, Nor Atikah Md.; Zakaria, Normah

2015-01-01

The purpose of leadership skills among technical and vocational educator are to prepare them towards effective organization. Effective leadership is widely accepted as being a key constituent in achieving organization improvement and to examine. This study aimed to gauge the leadership skills among technical and vocational educators effectiveness…

Individualizing Instruction in Vocational and Technical Education.

ERIC Educational Resources Information Center

Nee, John G.

On the premise that individualized instruction and its many variations has become increasingly more important to the vocational and technical educator, various aspects of an individualized instructional program are discussed under eight headings: (1) What Is Meant by Individualizing Instruction in Vocational and Technical Education? (2) Why Do We…

Degree of Practice of Emotional and Spiritual Education by Faculty Members of Tafila Technical University and Its Role in Development of Self-Behavior from the Perspective of Students

ERIC Educational Resources Information Center

Kraimeen, Hani; Al-Mhasnah, Abd Al Raheem

2017-01-01

This study aims to identify the practice of emotional and spiritual education by faculty members of Tafila Technical University and its relation in development of students' self-behavior, a notion that includes some aspects of self-emotions, behavior control, and emotional control and to guide a person towards achievement, excellence, in light of…

Green Technology to Support Education of Students with Moderate Intellectual Disability

ERIC Educational Resources Information Center

Mata, Liliana; Diaconescu, Alina; Lazar, Gabriel; Lazar, Iuliana

2015-01-01

The purpose of this study is to investigate the aspects that green technology offers in the education of students with moderate intellectual disability. The theoretical part highlights the technical facilities that green technology offers to education. An analysis of the most recent studies focuses on the use of interactive whiteboard to improve…

Technology Integration in the Teaching and Learning Process in Career and Technical Education Programs in North Carolina

ERIC Educational Resources Information Center

Jones, Sharon Torrence

2011-01-01

Career and technical education (CTE), historically known as vocational education, is a collective term used to identify high school curricula designed to teach students job skills and prepare them for employment (Lynch, 2000). Transformations in the workforce have created a demand for teachers to be technologically literate and adept at using…

Technical quality of root canal treatment performed by undergraduate students using hand instrumentation: a meta-analysis.

PubMed

Ribeiro, D M; Réus, J C; Felippe, W T; Pacheco-Pereira, C; Dutra, K L; Santos, J N; Porporatti, A L; De Luca Canto, G

2018-03-01

The technical quality of root canal treatment (RCT) may impact on the outcome. The quality of education received during undergraduate school may be linked to the quality of treatment provided in general dental practice. In this context, the aim of this systematic review was to answer the following focused questions: (i) What is the frequency of acceptable technical quality of root fillings, assessed radiographically, performed by undergraduate students? (ii) What are the most common errors assessed radiographically and reported in these treatments? For this purpose, articles that evaluated the quality of root fillings performed by undergraduate students were selected. Data were collected based on predetermined criteria. The key features from the included studies were extracted. GRADE-tool assessed the quality of the evidence. MAStARI evaluated the methodological quality, and a meta-analysis on all studies was conducted. At the end of the screening, 24 articles were identified. Overall frequency of acceptable technical quality of root fillings was 48%. From this total, 52% related to anterior teeth, 49% to premolars and 26% to molars. The main procedural errors reported were ledge formation, furcation perforation, apical transportation and apical perforation. The heterogeneity amongst the studies was high (84-99%). Five studies had a high risk of bias, eight had a moderate risk, and 11 had low risk. The overall quality of evidence identified was very low. The conclusion was that technical quality of root fillings performed by undergraduate students is low, which may reveal that endodontic education has limited achievement at undergraduate level. A plan to improve the quality of root fillings, and by extrapolation the overall quality of root canal treatment, should be discussed by the staff responsible for endodontic education and training. © 2017 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Education for a Working America. A Vision of Vocational Technical Education.

ERIC Educational Resources Information Center

National Association of State Directors of Vocational Technical Education Consortium.

This document presents the views of the National Association of State Directors of Vocational Technical Education regarding the challenge, mission, vision, underlying principles, practice, needs, and benefits/potential outcomes of vocational-technical education (VTE). The following topics are discussed: the challenge of making VTE the cornerstone…

Trends in Career and Technical Education Research

ERIC Educational Resources Information Center

Rojewski, Jay W.; Asunda, Paul; Kim, Soo Jung

2008-01-01

The purpose of this literature review was to identify current trends and issues in research focusing on career and technical education (CTE). The primary sources of literature for this review included all research articles published in three refereed scholarly journals--"Career and Technical Education Research," "Journal of Career and Technical…

An Assessment of Workplace Skills Acquired by Students of Vocational and Technical Education Institutions

ERIC Educational Resources Information Center

Bakar, Ab Rahim; Mohamed, Shamsiah; Hamzah, Ramlah

2013-01-01

This study was performed to identify the employability skills of technical students from the Industrial Training Institutes (ITI) and Indigenous People's Trust Council (MARA) Skills Training Institutes (IKM) in Malaysia. The study sample consisted of 850 final year trainees of IKM and ITI. The sample was chosen by a random sampling procedure from…

Engineering Knowledge and Student Development: An Institutional and Pedagogical Critique of Engineering Education

NASA Astrophysics Data System (ADS)

Tang, Xiaofeng

Educators have recommended the integration of engineering and the liberal arts as a promising educational model to prepare young engineers for global economic, environmental, sociotechnical, and ethical challenges. Drawing upon philosophy of technology, engineering studies, and educational psychology, this dissertation examines diverse visions and strategies for integrating engineering and liberal education and explores their impacts on students' intellectual and moral development. Based on archival research, interviews, and participant observation, the dissertation presents in-depth case studies of three educational initiatives that seek to blend engineering with the humanities, social sciences, and arts: Harvey Mudd College, the Picker Engineering Program at Smith College, and the Programs in Design and Innovation at Rensselaer Polytechnic Institute. The research finds that learning engineering in a liberal arts context increases students' sense of "owning" their education and contributes to their communication, teamwork, and other non-technical professional skills. In addition, opportunities for extensive liberal arts learning in the three cases encourage some students to pursue alternative, less technocentric approaches to engineering. Nevertheless, the case studies suggest that the epistemological differences between the engineering and liberal arts instructors help maintain a technical/social dualism among most students. Furthermore, the dissertation argues a "hidden curriculum," which reinforces the dominant ideology in the engineering profession, persists in the integrated programs and prevents the students from reflecting on the broad social context of engineering and critically examining the assumptions upheld in the engineering profession.

Career Technical Education Pathways Initiative Annual Report

ERIC Educational Resources Information Center

California Community Colleges, Chancellor's Office, 2014

2014-01-01

California's education system--the largest in the United States--is an essential resource for ensuring strong economic growth in the state. The Career Technical Education Pathways Initiative (the Initiative) became law in 2005 with Senate Bills 70 and 1133 and provided more than $380 million over eight years to improve career technical education…

Linking the Timing of Career and Technical Education Coursetaking with High School Dropout and College-Going Behavior

ERIC Educational Resources Information Center

Gottfried, Michael A.; Plasman, Jay Stratte

2018-01-01

While prior studies have examined the efficacy of career and technical education (CTE) courses on high school students' outcomes, there is little knowledge on timing of these courses and a potential link to student outcomes. We asked if the timing of these courses predicted differences in the likelihood of dropout and on-time high school…

Environmental Education in Technical and Vocational Education. A Discussion Document for Unesco Training Seminars on the Incorporation of Environmental Education into Technical and Vocational Education. Environmental Education Series 24.

ERIC Educational Resources Information Center

Grabe, Sven

This paper is intended to serve as the basis for discussion of the scope and place of environmental education in technical and vocational education. It is addressed primarily to administrators, curriculum developers, and other active participants in the definition of scope and content of technical and vocational courses. After a brief introduction…

Correlate of Resource Utilization and Students' Learning Outcome in Colleges of Education in South West Nigeria

ERIC Educational Resources Information Center

Ibukun, W. O.; Akinfolarin, C. A.; Alimi, O. S.

2011-01-01

This study investigated resource utilisation in vocational and technical education as a correlate of student learning outcome in selected colleges of education in south west Nigeria. The study examined the relationship between time, space and physical resource utilisation and perceived student learning outcome. The study used the descriptive…

Supporting the Educational Needs of Students with Orthopedic Impairments.

ERIC Educational Resources Information Center

Heller, Kathryn Wolff; Swinehart-Jones, Dawn

2003-01-01

This article provides information on orthopedic impairments and the unique knowledge and skills required to provide these students with an appropriate education. Information on current practice is provided, as well as training and technical assistance models that can be used to help provide teachers with the necessary training. (Contains…

Learning How (and How Not) to Weld: Vocational Learning in Technical Vocational Education

ERIC Educational Resources Information Center

Asplund, Stig-Börje; Kilbrink, Nina

2018-01-01

This article focuses on vocational learning in technical vocational education in upper-secondary school, with a special focus on the object of learning to weld. A concrete teaching situation where the learning object to weld is the focus of the interaction between a vocational teacher and an upper-secondary student was documented by a video camera…

Construction Mechanic Part I, 8-5. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, is the first of a two-course series that teaches students to maintain and repair automotive and construction equipment using either gasoline or diesel engines. It covers basic combustion engine principles and electrical system principles as well…

Construction Mechanic Part II, 8-6. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, is the second of a two-course series that teaches students to maintain and repair automotive and construction equipment using either gasoline or diesel engines. It covers basic chassis and power train troubleshooting, diagnosis, and adjustment…

Career-Technical Education--The Immediate Need for Work-Based Curriculum.

ERIC Educational Resources Information Center

Nee, John G.

1994-01-01

Career-technical education may be informal on-the-job training, organized workplace education, community college or technical institute programs, or apprenticeships, internships, and cooperative agreements. Another alternative is polytechnical education: providing technical and general studies for adults in existing school facilities after school…

Re-Engineering Vocational and Technical Education (VTE) for Sustainable Development in North Central Geo-Political Zone, Nigeria

ERIC Educational Resources Information Center

Sofoluwe, Abayomi Olumade

2013-01-01

The purpose of the study is to re-engineer vocational and technical education for sustainable development in the North Central Geo-Political Zone in Nigeria. The research design adopted was a survey inferential type. Stratified random was used to select 36 schools out of 98 schools while 920 students out of 3680 students were sampled. The data…

Aviation Structural Mechanic, Second Class, 2-13. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This self-paced, individualized course, adapted from military curriculum materials for use in vocational and technical education, teaches students the skills needed to become aviation structural mechanics (second class). The course materials consist of five pamphlets covering the structural maintenance and repair of aircraft. The first pamphlet…

[Teaching non-technical skills for critical incidents: Crisis resource management training for medical students].

PubMed

Krüger, A; Gillmann, B; Hardt, C; Döring, R; Beckers, S K; Rossaint, R

2009-06-01

Physicians have to demonstrate non-technical skills, such as communication and team leading skills, while coping with critical incidents. These skills are not taught during medical education. A crisis resource management (CRM) training was established for 4th to 6th year medical students using a full-scale simulator mannikin (Emergency Care Simulator, ECS, METI). The learning objectives of the course were defined according to the key points of Gaba's CRM concept. The training consisted of theoretical and practical parts (3 simulation scenarios with debriefing). Students' self-assessment before and after the training provided the data for evaluation of the training outcome. A total of 65 students took part in the training. The course was well received in terms of overall course quality, debriefings and didactic presentation, the mean overall mark being 1.4 (1: best, 6: worst). After the course students felt significantly more confident when facing incidents in clinical practice. The main learning objectives were achieved. The effectiveness of applying the widely used ECS full-scale simulator in interdisciplinary teaching has been demonstrated. The training exposes students to crisis resource management issues and motivates them to develop non-technical skills.

Definitive Readings in the History, Philosophy, Theories and Practice of Career and Technical Education

ERIC Educational Resources Information Center

Wang, Victor C. X., Ed.

2010-01-01

In this information age, career and technical education (CTE) has become a multibillion dollar training enterprise. To make the students more competitive in the labor force and to make the nation economically strong and firms internationally competitive, everyone has to depend on CTE to train today's workers of various kinds. This book brings…

Engineering and Technical Education in Russia, in Numbers

ERIC Educational Resources Information Center

Aref'ev, A. L.; Aref'ev, M. A.

2013-01-01

An analysis of the main tendencies in the development of engineering and technical education in Russia during the last 100 years shows that earlier strengths have been lost, and that currently technical education in Russia is far behind modern world standards.

How Do Professional Learning Communities Foster Strong Career and Technical Education Programs of Study in Illinois Public High Schools?

ERIC Educational Resources Information Center

Custable, Wendy

2013-01-01

This research study examines how Illinois public high school Career and Technical Education educational leaders employ best practices in providing all students rigorous, relevant, and equitable learning experiences within a professional learning community structure. This study utilized a mixed method two-tier case study methodology. Tier one…

Assessing the Animal Science Technical Skills Needed by Secondary Agricultural Education Graduates for Employment in the Animal Industries: A Modified Delphi Study

ERIC Educational Resources Information Center

Slusher, Wendy L.; Robinson, J. Shane; Edwards, M. Craig

2011-01-01

Career and technical education courses, such as agricultural education, exist, in part, to assist students in acquiring the competencies needed to achieve employability. However, whether the current secondary agricultural education curriculum meets the needs of industry leaders who employ high school graduates of agricultural education programs is…

Career Technical Education Pathways Initiative

ERIC Educational Resources Information Center

California Community Colleges, Chancellor's Office, 2013

2013-01-01

California's education system--the largest in the United States--is an essential resource for ensuring strong economic growth in the state. The Career Technical Education Pathways Initiative (referred to as the Initiative in this report), which became law in 2005, brings together community colleges, K-12 school districts, employers, organized…

The Effect of Web-Based Collaborative Learning Methods to the Accounting Courses in Technical Education

ERIC Educational Resources Information Center

Cheng, K. W. Kevin

2009-01-01

This study mainly explored the effect of applying web-based collaborative learning instruction to the accounting curriculum on student's problem-solving attitudes in Technical Education. The research findings and proposed suggestions would serve as a reference for the development of accounting-related curricula and teaching strategies. To achieve…

Career and Technical Education Pathway Programs, Academic Performance, and the Transition to College and Career

ERIC Educational Resources Information Center

Lekes, Natasha; Bragg, Debra. D.; Loeb, Jane W.; Oleksiw, Catherine A.; Marszalek, Jacob; Brooks-LaRaviere, Margaret; Zhu, Rongchun; Kremidas, Chloe C.; Akukwe, Grace; Lee, Hyeong-Jong; Hood, Lisa K.

2007-01-01

This mixed method study examined secondary student matriculation to two selected community colleges offering career and technical education (CTE) transition programs through partnerships with K-12 and secondary districts having numerous high schools. The study had two distinct components: (1) a secondary study that compared CTE and non-CTE…

Use of Learner-Centered Strategies in the Preparation of Community and Technical College Leaders: Assessments by Participating Doctoral Students

ERIC Educational Resources Information Center

Browne-Ferrigno, Tricia; Muth, Rodney

2010-01-01

This paper presents assessments by students actively engaged in a recently redesigned Doctor of Education (EdD) program, delivered at a research-extensive university participating in the the Carnegie Project on the Education Doctorate (CPED), to prepare leaders for a statewide system of community and technical colleges. Because a unique feature of…

15 CFR 296.32 - Technical and educational services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Technical and educational services... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM Dissemination of Program Results § 296.32 Technical and educational services. (a) Under...

Scope and Challenges of Technical Education: A Kerala Perspective

ERIC Educational Resources Information Center

Rahman, M. Abdul; Unnikrishnan, Ramesh

2015-01-01

Technical education contributes a major share to the overall education system and plays a vital role in the social and economic development of our nation. Since independence, the technical education system in our country has grown into a fairly large-sized system, offering opportunities for education and training in a wide variety of trades and…

Search and Rescue Aircrewman/HH3F Flight Mechanic, 2-10. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This self-paced, individualized course, adapted from military curriculum materials for use in vocational and technical education, teaches students the skills needed to become a qualified avionics worker on the HH-3F helicopter. The course materials consist of three pamphlets: two student workbooks and a composite ground/flight syllabus. Each…

Proceedings of the Annual National Clinic on Technical Education (12th, Spokane, Washington, March 26-28, 1975). Human Resource Development: Technical Education's Challenge.

ERIC Educational Resources Information Center

Rutledge, Gene; And Others

This report includes the presentations of the speakers appearing before the National Clinic on Technical Education. Topics cover human resource development; the impact of technical education on economic development (in Mississippi); economics of allied health education; manpower implications of environmental protection; manpower needs for…

Racial/Ethnic and Gender Equity Patterns in Illinois High School Career and Technical Education Coursework

ERIC Educational Resources Information Center

Hamilton, Asia Fuller; Malin, Joel; Hackmann, Donald

2015-01-01

This study analyzed high school Career and Technical Education (CTE) enrollments in Illinois, with comparisons to national data when possible, by career cluster and pathway and with respect to gender and racial/ethnic makeup of students. Enrollment patterns in Science, Technology, Engineering, and Math (STEM) CTE programming were emphasized.…

Development of technical skills in Electrical Power Engineering students: A case study of Power Electronics as a Key Course

NASA Astrophysics Data System (ADS)

Hussain, I. S.; Azlee Hamid, Fazrena

2017-08-01

Technical skills are one of the attributes, an engineering student must attain by the time of graduation, as per recommended by Engineering Accreditation Council (EAC). This paper describes the development of technical skills, Programme Outcome (PO) number 5, in students taking the Bachelor of Electrical Power Engineering (BEPE) programme in Universiti Tenaga Nasional (UNITEN). Seven courses are identified to address the technical skills development. The course outcomes (CO) of the courses are designed to instill the relevant technical skills with suitable laboratory activities. Formative and summative assessments are carried out to gauge students’ acquisition of the skills. Finally, to measure the attainment of the technical skills, key course concept is used. The concept has been implemented since 2013, focusing on improvement of the programme instead of the cohort. From the PO attainment analysis method, three different levels of PO attainment can be calculated: from the programme level, down to the course and student levels. In this paper, the attainment of the courses mapped to PO5 is measured. It is shown that Power Electronics course, which is the key course for PO5, has a strong attainment at above 90%. PO5 of other six courses are also achieved. As a conclusion, by embracing outcome-based education (OBE), the BEPE programme has a sound method to develop technical psychomotor skills in the degree students.

The Successful Teacher in Technical Education: The Preparation of the Successful Teacher.

ERIC Educational Resources Information Center

Storm, George

The purposes of this study were to identify success factors in technical education teaching and to obtain subject matter recommendations for the improvement of technical teacher education. A national population of technical education directors offering post-secondary technical education programs in 1963 under Title III of the National Defense…

Effective educator-student relationships in nursing education to strengthen nursing students' resilience.

PubMed

Froneman, Kathleen; Du Plessis, Emmerentia; Koen, Magdelene P

2016-06-10

Little research has been conducted in private nursing schools with regard to the educator-student relationship to strengthen the resilience of nursing students and to improve the educator-student relationship. An effective educator-student relationship is a key factor to ensure a positive learning climate where learning can take place and resilience can be strengthened. The purpose was to explore and describe nursing students' view on the basic elements required for an effective educator-student relationship to strengthen their resilience and the educator-student relationship. This study followed an explorative, descriptive and contextual qualitative design in a private nursing education institution in the North West Province. Purposive sampling was used. The sample consisted of 40 enrolled nursing auxiliary students. The World Café Method was used to collect data, which were analysed by means of content analysis. The following five main themes were identified and included: (1) teaching-learning environment, (2) educator-student interaction, (3) educator qualities, (4) staying resilient and (5) strategies to strengthen resilience. Students need a caring and supportive environment; interaction that is constructive, acknowledges human rights and makes use of appropriate non-verbal communication. The educator must display qualities such as love and care, respect, responsibility, morality, patience, being open to new ideas, motivation, willingness to 'go the extra mile' and punctuality. Students reported on various ways how they manage to stay resilient. It thus seems that basic elements required in an effective educator-student relationship to strengthen the resilience of students include the environment, interaction, educator and student's qualities and resilience.

An Intensive Onsite Technical Assistance Model to Promote Inclusive Educational Practices for Students with Disabilities in Middle School and High School

ERIC Educational Resources Information Center

Clark, Nitasha M.; Cushing, Lisa S.; Kennedy, Craig H.

2004-01-01

The authors examined the effects of an intensive onsite technical assistance (IOTA) model on the inclusive practices of special educators. Three special educators received technical assistance that included performance assessments, workshops on inclusive practices, and intensive onsite follow-up support. Inclusive practices were measured using…

Effects of Leadership Styles in Technical and Vocational Students, UTHM

ERIC Educational Resources Information Center

Razak, Nur Afifah Binti Abdul; Hamidon, Nur Izeanty Binti

2015-01-01

Effective leadership helps our nation through times become a developed country. This study was undertaken to investigate the effects of leadership style among students in Technical and Vocational at University Tun Hussein Onn Malaysia. Descriptive study carried out to evaluate student leadership. The study sample consisted of 319 Technical and…

Technical Education--The Key to Sustainable Technological Development

ERIC Educational Resources Information Center

Odo, J. U.; Okafor, W. C.; Odo, A. L.; Ejikeugwu, L. N.; Ugwuoke, C. N.

2017-01-01

Technical education has been identified as one of the most effective human resource development that needs to be embraced for rapid industrialization and sustainable technological development of any nation. Technical education has been an integral part of national development in many societies because of its impact on productivity and economic…

Career and Technical Student Organizations: Building Our Future.

ERIC Educational Resources Information Center

Reese, Susan

2003-01-01

Provides a look at the history, structure, and role of career and technical student organizations: Business Professionals of America, SkillsUSA-VICA, DECA/Delta Epsilon Chi, Health Occupations Students of America, the Technology Student Association, Future Business Leaders of America-Phi Beta Lambda, FFA, and Family, Career, and Community Leaders…

State Strategies for Financing Career and Technical Education

ERIC Educational Resources Information Center

Foster, Laura Rasmussen; Klein, Steve; Elliott, Barbara

2014-01-01

The "Carl D. Perkins Career and Technical Education Act of 2006" ("Perkins IV" or "Act") authorizes federal funding for career and technical education (CTE) and specifies a formula for distributing those funds. Allocations at the secondary level are based on the number of youths ages 5-17 who reside within a local…

Career and Technical Education Reforms and Comprehensive School Reforms in High Schools: Their Impact on Education Outcomes for At-Risk Youth. The Highlight Zone: Research @ Work.

ERIC Educational Resources Information Center

Castellano, Marisa; Stringfield, Samuel; Stone, James R., III

The impact of career and technical education (CTE) reforms and comprehensive school reforms in high schools on education outcomes for at-risk youth was examined in a review of research on current reforms. The review identified a series of individual, family and home, school, and community factors that can place students at risk of failing to…

The De-Facto Privatization of Secondary Education in Egypt: A Study of Private Tutoring in Technical and General Schools

ERIC Educational Resources Information Center

Sobhy, Hania

2012-01-01

Most secondary school students in Egypt enrol in private tutoring in almost all subjects throughout the school year. A large proportion of students have stopped attending school altogether due to their reliance on tutoring. This study of how educational markets are perpetuated at school level finds that in the technical track catering to the…

"Crafts and Technology" and "Technical Education" in Austria

ERIC Educational Resources Information Center

Seiter, Josef

2009-01-01

In Austria, the syllabus for "Technisches Werken/Crafts and Technology" for all types of school in general education was issued more than 30 years ago. The authors believed that it might lay the foundations for technical literacy. The paper is about how the situation of the subject and, with it, technical education has developed since…

Career Technical Education Adjunct Faculty Teacher Readiness: An Investigation of Teacher Excellence and Variables of Preparedness

ERIC Educational Resources Information Center

Guerra, Jorge

2012-01-01

The purpose of this research was to examine the relationship between teaching readiness and teaching excellence with three variables of preparedness of adjunct professors teaching career technical education courses through student surveys using a correlational design of two statistical techniques; least-squares regression and one-way analysis of…

Causal Effects of Career-Technical Education on Postsecondary Work Outcomes of Individuals with High-Incidence Disabilities

ERIC Educational Resources Information Center

Lee, Heok In; Rojewski, Jay W.; Gregg, Noel

2016-01-01

Using data from the National Longitudinal Transition Study-2, a propensity score analysis revealed significant causal effects for a secondary career and technical education (CTE) concentration on the postsecondary work outcomes of adolescents with high-incidence disabilities. High school students identified as CTE concentrators (three or more high…

Materials Testing and Quality Control Soils, 3-28. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This instructional package on material testing and quality control of soils has been adapted from military curriculum materials for use in technical and vocational education programs. This short course presents basic information on soils as well as exploration, field identification, and laboratory procedures that will enable students completing…

NASA/DOD Aerospace Knowledge Diffusion Research Project. Report 26: The technical communication practices of aerospace engineering students: Results of the phase 3 AIAA National Student Survey

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Hecht, Laura M.; Barclay, Rebecca O.; Kennedy, John M.

1994-01-01

This report describes similarities and differences between undergraduate and graduate engineering students in the context of two general aspects of the educational experience. First, we explore the extent to which students differ regarding the factors that lead to the choice of becoming an engineer, current satisfaction with that choice, and career-related goals and objectives. Second, we look at the technical communication practices, habits, and training of aerospace engineering students. The reported data were obtained from a survey of student members of the American Institute of Aeronautics and Astronautics (AIAA). The survey was undertaken as a phase 3 activity of the NASA/DoD Aerospace Knowledge Diffusion Research Project. Data are reported for the following categories: student demographics; skill importance, skill training, and skill helpfulness; collaborative writing; computer and information technology use and importance; use of electronic networks; use and importance of libraries and library services; use and importance of information sources and products; use of foreign language technical reports; and foreign language (reading and speaking) skills.

Qualities attributed to an ideal educator by medical students: should faculty take cognizance?

PubMed

McLean, Michelle

2001-07-01

Since teaching is a fundamental activity of tertiary institutions, measures need to be in place to assess the teaching quality of individual academic staff members. Few faculties, however, have objective criteria for assessing this quality. In the present study, for second-year medical students, being a good communicator was identified as the most important asset a teacher could have. Personal qualities, such as being approachable, helpful and friendly, were more highly regarded than technical issues such as being punctual and having organized lectures. This suggests that students value the teacher-learner relationship. Since the global trend of medical education is towards a more humanistic approach to patient care, medical teachers need to become educators, interacting with individual students. Educators might also have to become role models for students in terms of attitudes and ethics. Students will therefore be in the best position to judge the impact of individual educators on their development.

Initiatives in Technical and Further Education. Numbers 3 and 4.

ERIC Educational Resources Information Center

National TAFE Clearinghouse, Adelaide (Australia).

These two issues contain abstracts of 127 and 118 documents, respectively, related to the field of technical and further education that are available through the Australian Technical and Further Education (TAFE) Clearinghouse system. These types of materials are included: research reports/technical reports, evaluation studies, curriculum materials…

Construction Mechanic, Engine Tune-Up II (Diesel), 8-8. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for vocational and technical education, teaches students to restore diesel engine performance to the manufacturer's specifications through troubleshooting and analyzing diesel engine fuel systems and to make minor and major adjustments to those components that directly affect engine…

Importance of Technical Writing in Engineering Education

NASA Astrophysics Data System (ADS)

Narayanan, M.

2010-12-01

It is important to recognize technical writing as a creative vehicle to communicate with the audience. It is indeed possible to motivate a reluctant learner by encouraging student writing combined with reading and research. John Kosakowski is of the opinion that writing assignments actually help to strengthen the self-confidence of a lethargic learner (Kosakowski, 1998). Researchers in the area of cognitive science and educational psychology are also of the opinion that encouraging students to writing actually helps the learners cultivate a positive attitude toward the subject matter in question. One must also recognize the fact that the students are indeed very reluctant to devote time and effort that requiress descriptive long writing assignments. One has to be more creative towards assignments that utilize problem-solving pedagogy (Saxe, 1988; Senge, 1990; Sims, 1995; Young & Young, 1999). Education World writer Gloria Chaika (Chaika, 2000) states that “Talent is important, but practice creates the solid base that allows that unique talent to soar. Like athletes, writers learn by doing. Good writing requires the same kind of dedicated practice that athletes put in. Young writers often lack the support they need to practice writing and develop their talent to the fullest, though.” Writing assignments have several key elements and the author has outlined below, some ideas for conducting assessment. 1. Identification of a purpose. 2. Focusing on the subject matter. 3. Attracting the attention of audience. 4. Format, flow and familiarity of the structure. 5. Observation of formality, voice and tone. 6. Promotion of critical thinking. 7. Importance of Logic and evidence-based reasoning. 8. Follows a realistic time line. 9. Process and procedure are properly outlined. References: Barr, R. B., & Tagg, J. (1995, November/December). From teaching to learning: A new paradigm for undergraduate education. Change: The Magazine of Higher Education, 13-24. Cox, M. D

ANNOTATED BIBLIOGRAPHY FOR VOCATIONAL-TECHNICAL EDUCATION, 1966.

ERIC Educational Resources Information Center

BRUNETTI, FRANK; WILLIAMS, JEROME

MORE THAN 1,000 ITEMS ARE LISTED ALPHABETICALLY WITHIN SUBJECT AREAS. THE AREAS INCLUDE AGRICULTURAL EDUCATION, ART INDUSTRIES AND TRADE, BUSINESS EDUCATION, ECONOMICS, JOB ANALYSIS, LABOR AND DEMOCRACY, MANPOWER, OCCUPATIONAL HEALTH NURSING, OCCUPATIONS, PERSONNEL MANAGEMENT, TECHNICAL EDUCATION, VOCATIONAL GUIDANCE, VOCATIONAL MATHEMATICS,…

Satisfaction Clustering Analysis of Distance Education Computer Programming Students: A Sample of Karadeniz Technical University

ERIC Educational Resources Information Center

Ozyurt, Hacer

2014-01-01

In line with recently developing technology, distant education systems based on information technologies are started to be commonly used within higher education. Students' satisfaction is one of the vital aspects in order to maintain distant education efficiently and achieving its goal. As a matter of the fact, previous studies proved that student…

A Comprehensive Study of Vocational Interests, Occupational Opportunities and Cooperative Education for the Mid-Plains Nebraska Technical Community College Area.

ERIC Educational Resources Information Center

Boardman, Gerald R.; Mendenhall, Elton B.

The main purpose of the study was to develop a cooperative education plan for the Mid-Plains Technical Community College area through assessment of: (1) vocational interests of students in grades 9-12, (2) occupational opportunities of employers, and (3) various existing cooperative education programs. Vocational interest assessment consisted of…

The Perkins Act of 2006: Connecting Career and Technical Education with the College and Career Readiness Agenda. Achieve Policy Brief

ERIC Educational Resources Information Center

Meeder, Hans

2008-01-01

Policymakers and educators around the nation are wrestling with an important challenge--how to raise expectations for high school achievement, while increasing relevance and engagement in learning to keep students in school. Career and technical education (CTE) is receiving renewed attention as a strategy for increasing school engagement and rigor…

Data Stewardship: Managing Personally Identifiable Information in Electronic Student Education Records. SLDS Technical Brief 2. NCES 2011-602

ERIC Educational Resources Information Center

National Center for Education Statistics, 2010

2010-01-01

The growth of electronic student data in America's education system has focused attention on the ways these data are collected, processed, stored, and used. The use of records in Statewide Longitudinal Data Systems to follow the progress of individual students over time requires maintaining student education records that include information that…

Government-Funded Students and Courses, January to March 2017. Australian Vocational Education and Training Statistics

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2017

2017-01-01

This publication provides a summary of data relating to students, programs, subjects and training providers in Australia's government-funded vocational education and training (VET) system (defined as all Commonwealth and state/territory government-funded training delivered by technical and further education [TAFE] institutes, other government…

International Students in an Indian Technical University: Faculty Counselors' Preparedness and Perspectives

ERIC Educational Resources Information Center

Karky, Nandini

2013-01-01

A qualitative inquiry into the presence of international students in an Indian Technical University, through the voices of the faculty, who are appointed as international students' counselors. A case study methodology was employed with document analysis and interviews to perceive how technical faculty managed students from varying cultural…

Technical Mathematics.

ERIC Educational Resources Information Center

Flannery, Carol A.

This manuscript provides information and problems for teaching mathematics to vocational education students. Problems reflect applications of mathematical concepts to specific technical areas. The materials are organized into six chapters. Chapter 1 covers basic arithmetic, including fractions, decimals, ratio and proportions, percentages, and…

Some Characteristics and Writing Problems of Technically Oriented Students.

ERIC Educational Resources Information Center

Ruehr, Ruthann

An understanding of the writing problems and personalities of some of the technically oriented students at Michigan Technological University may help others who teach similar students. Although their scores on aptitude tests are high, these students have had very little experience in writing. In addition, the majority of the students have had very…

Higher Education Technical Corrections (Public Law 111-39)

ERIC Educational Resources Information Center

US Congress, 2009

2009-01-01

The Higher Education Technical Corrections (Public Law 111-39) was put in place to make technical corrections to the Higher Education Act of 1965, and for other purposes. The table of contents for this Act is as follows: (1) Sec. 1. Table of contents; (2) Sec. 2. References; and (3) Sec. 3. Effective date. (A) Title I--General Provisions: (4) Sec.…

The Marketability of Technical Graduates from Higher Educational Institutions (HEIs) Offering Technical and Vocational Education and Training (TVET): A Case from Malaysia

ERIC Educational Resources Information Center

Rajadurai, Jegatheesan; Sapuan, Noraina Mazuin; Daud, Salina; Abidin, Nurazariah

2018-01-01

Technical, Vocational Education and Training has been viewed as a means of developing a nation. The marketability of technical graduates is reliant on whether these graduates possess the attributes demanded by their respective industries. Hence, this study aims to investigate the gap between the key attributes of Higher Education Institutions'…

Human Resource Development: Technical Education's Challenge. Proceedings of the Annual National Clinic on Technical Education (12th, Spokane, Washington, March 26-28, 1975).

ERIC Educational Resources Information Center

Washington State Community Coll. District 17, Spokane.

Speeches and discussions are transcribed in this report, which also includes a listing of the American Technical Education Association (ATEA) committee members, exhibitors, officers, and directory of speakers. Speeches covered "Human Resource Development" by Gene Rutledge; "The Impact of Technical Education on Economic…

New Zealand Management Students' Perceptions of Communication Technologies in Correspondence Education.

ERIC Educational Resources Information Center

Ostman, Ronald E.; Wagner, Graham A.

1987-01-01

Describes a survey of 724 management students in New Zealand's Technical Correspondence Institute which was conducted to determine whether the introduction of educational technologies could decrease the dropout rate. The multiple linear regression model that was used to analyze the questionnaire responses is presented, and predictor variables are…

Educational Choice Regarding Technical Education: Research with Case Study

ERIC Educational Resources Information Center

Kacerauskas, Tomas; Šaparauskas, Jonas

2017-01-01

In first part, the models, theories, mechanisms and presumptions, as well as the ideas of educational choice discourse have been scrutinized. In the second part, the survey on educational choice at Vilnius Gediminas Technical University, Lithuania has been presented. The methodology used in this research is a survey of respondents and survey…

Educational Experiences of Embry-Riddle Students through NASA Research Collaboration

NASA Technical Reports Server (NTRS)

Schlee, Keith; Gangadharan, Sathya; Chatman, Yadira; Sudermann, James; Walker, Charles; Ristow, James

2006-01-01

NASA's educational. programs benefit students and faculty while increasing the overall productivity of the organization. The NASA Graduate Student Research Program (GSRP) awards fellowships for graduate study leading to both masters and doctoral degrees in several technical fields. GSRP participants have the option to utilize NASA Centers andlor university research facilities. In addition, GSRP students can serve as mentors for undergrad students to provide a truly unique learning experience. NASA's Cooperative Education Program allows undergraduate students the chance to gain "real-world" work experience in the field. It also gives NASA a no risk capability to evaluate the true performance of a prospective new hire without relying solely on a "paper resume" while providing the students with a greater hiring potential upon graduation, at NASA or elsewhere. University faculty can also benefit by participating in the NASA Faculty Fellowship Program (NFFP). This program gives the faculty an opportunity to work with NASA peers. The Mission Analysis Branch of the Expendable Launch Vehicles Division at NASA Kennedy Space Center has utilized these two programs with students from Embry-Riddle Aeronautical University (ERAU) to conduct research in modeling and developing a parameter estimation method for spacecraft fuel slosh using simple pendulum analogs. Simple pendulum models are used to understand complicated spacecraft fuel slosh behavior. A robust parameter estimation process will help to identif' the parameters that will predict the response fairly accurately during the initial stages of design. These programs provide students with a unique opportunity to work on "real-world" aerospace problems, like spacecraft fuel slosh,. This in turn reinforces their problem solving abilities and their communication skills such as interviewing, resume writing, technical writing, and presentation. Faculty benefits by applying what they have learned to the classroom. Through

Graduates Placement Report, 1981: New Hampshire Technical Institute and New Hampshire Vocational-Technical Colleges.

ERIC Educational Resources Information Center

New Hampshire State Dept. of Education, Concord. Div. of Post-Secondary Education.

The New Hampshire Technical Institute (NHTI) and the six New Hampshire Vocational-Technical Colleges (NHVTC) offer collegiate education preparing men and women for direct employment in business, industry, health, and service-related fields. At the completion of the 1980-81 academic year, 1036 students had graduated from 48 different programs…

Nontechnical Teaching Skills Education for Certified Registered Nurse Anesthetist Clinical Instructors and the Impact on the Clinical Education of Student Registered Nurse Anesthetists

ERIC Educational Resources Information Center

Welch, Gena M.

2017-01-01

Purpose: The purpose of this Scholarly project was to improve Student Registered Nurse Anesthetist (SRNA) clinical education consistency and quality by enhancing communication between Certified Registered Nurse Anesthetists (CRNAs) clinical instructors and SRNAs. This was accomplished by educating CRNA clinical instructors on non-technical skills,…

Impact of educational messages on patient acceptance of male medical students in OB-GYN encounters.

PubMed

Buck, Katherine; Littleton, Heather

2016-09-01

Although training in obstetrics and gynecology is a key part of medical education, male students receive less extensive experience, due in part to patient refusals. However, there is limited work seeking to reduce patient refusal rates of male students. The current study examined the efficacy of two messages at increasing male medical student acceptance into a well-woman visit. A total of 656 college women participated in a simulation study where they viewed a video of a nurse asking for permission to have a male medical student participate in their well-woman visit. The 30.5% of women who refused student participation (n = 181) were randomly assigned to view a video of the nurse either describing students' medical knowledge and technical skills training (e.g. training in performing pelvic exams) or empathic skills training (e.g. training in communication about sensitive issues). They were again asked if they would be willing to have the student participate. Both messages similarly increased student acceptance with 44.8% of those receiving the empathic skills training message and 48.9% of those who received the medical/technical skills training message accepting student participation, χ(2) (1, N = 181) = 0.3, p = 0.58. Educational messages about medical student training delivered in an engaging fashion by a credible source are a potentially effective tool to increase male student acceptance into sensitive patient encounters. Future work should test these messages in real-world settings as part of a focus on patient education to increase comfort with student participation.

A Case Study on the Status of Technical and Vocational Education in Thailand. Case Studies on Technical and Vocational Education in Asia and the Pacific.

ERIC Educational Resources Information Center

Shoolap, Charoon; Choomnoom, Siripan

This two-part report presents an overview of the vocational and technical education system in Thailand. The first part is a review of the current and likely future situations pertaining to vocational and technical education in that country. An analysis of economic conditions, human resource development, and the existing technical and vocational…

Vermont Technical Education Commission Report.

ERIC Educational Resources Information Center

Vermont State Technical Education Commission, Montpelier.

A 1968 New England Regional Commission grant to the Vermont Department of Administration financed a feasibility study for a technical college at the postsecondary level. The commission undertook two specific studies: an examination of ultimate career destinations of Vermont secondary students and a survey of Vermont industry to determine immediate…

New Desktop Virtual Reality Technology in Technical Education

ERIC Educational Resources Information Center

Ausburn, Lynna J.; Ausburn, Floyd B.

2008-01-01

Virtual reality (VR) that immerses users in a 3D environment through use of headwear, body suits, and data gloves has demonstrated effectiveness in technical and professional education. Immersive VR is highly engaging and appealing to technically skilled young Net Generation learners. However, technical difficulty and very high costs have kept…

Relational Study of Technical Education in Scotland and Nigeria for Sustainable Skill Development

ERIC Educational Resources Information Center

Umunadi, E. Kennedy

2014-01-01

This paper was designed to look at technical education curriculum and mode of implementation in Scotland in order to adopt the advantageous attributes of the Scottish technical education in Nigeria. The paper x-rayed the staff perceptions of technical education and its roles in Scotland; history of technical education before the advent of British…

Metric Education; A Position Paper for Vocational, Technical and Adult Education.

ERIC Educational Resources Information Center

Cooper, Gloria S.; And Others

Part of an Office of Education three-year project on metric education, the position paper is intended to alert and prepare teachers, curriculum developers, and administrators in vocational, technical, and adult education to the change over to the metric system. The five chapters cover issues in metric education, what the metric system is all…

Developments in Technical Education in the British Caribbean, 1940-60.

ERIC Educational Resources Information Center

Pemberton, S. Macpherson

The paper discusses developments in technical education in the British West Indies from 1940-1960 emphasizing the relation between education and economic development. The objective is to analyze the economic basis of progress in technical education. The document is presented in four chapters. Chapter I summarizes historical background prior to…

The Secretary's Awards for Outstanding Vocational-Technical Education Programs. 1995.

ERIC Educational Resources Information Center

Office of Vocational and Adult Education (ED), Washington, DC.

This publication describes the 12 winning programs and the 9 semifinalists of the 1995 U.S. Secretary of Education's Awards for Outstanding Vocational-Technical Education Programs. The awards program was established in 1981 to recognize excellence in local school-to-work and vocational-technical education programs, services, and activities that…

Longitudinal Analysis of Student Performance between Host and Cooperating College Learners in the Dental Hygiene Program at Northcentral Technical College in Wausau, Wisconsin.

ERIC Educational Resources Information Center

Olmsted, Jodi L.

The academic performance of students enrolled in a distance education dental hygiene program at Northcentral Technical College (NTC) in Wausau, Wisconsin, was analyzed in a comparative, quasi-experimental study. The study sample consisted of five cohorts of program graduates (students graduating in 1997-2001). The experiment groups were divided…

Athletic Training Students With Disabilities: A Survey of Entry-Level Education Programs

PubMed Central

Newsham, Katherine R

2006-01-01

Context: The Rehabilitation Act of 1973 and the Americans with Disabilities Act of 1990 created and expanded protection for people with disabilities. Objective: To identify the proportion of students with disabilities enrolled in entry-level athletic training education programs (ATEPs), to examine the nature of the disabilities reported by these students, and to assess the number of ATEPs with policies (beyond technical standards) for admitting students with disabilities. Design: I distributed a survey via e-mail and the US Postal Service. The survey instrument was adapted from a tool used in similar research on medical education programs. Setting: Entry-level ATEPs. Patients or Other Participants: The survey was distributed to program directors at 292 Commission on Accreditation of Allied Health Education Program–accredited entry-level ATEPs. Main Outcome Measure(s): Using frequency analysis, I determined the rate at which students with disabilities enrolled in entry-level ATEPs and the types of disabilities represented. Disabilities represented in the study were related to learning, auditory, visual, emotional, orthopaedic, mobility, and motor skill impairments. Results: Of the 283 surveys delivered, 105 (37%) were completed and returned. A total of 70% of respondents reported enrollment of students with disabilities in their ATEPs. The number of students with disabilities in entry-level ATEPs increased during the 4-year period of this study, and the proportion of students with disabilities has also increased annually (from 1.8% to 2.6%). The most common type of impairment was a learning disability, accounting for more than 80% of all disabilities reported. Fewer than 10% of the ATEPs had a specific enrollment policy for students with disabilities. Conclusions: The number of students with disabilities in entry-level ATEPs is increasing, yet this figure is well below the 9% reported for the general student population. Most institutions rely on technical

Making space part of general education

NASA Technical Reports Server (NTRS)

Horan, Stephen

1992-01-01

General education reform is on-going at many universities to, in part, make undergraduate students more technically literate. The space program provides an area of study that is still exciting to students, provides technical content, and can incorporate the other goals. Additionally, human space activity contains international and interdisciplinary dimensions that can reach students outside of the technical disciplines. The development and contents of a space education course to become part of the university's general education program open to all students is presented. Included in the presentation is a listing of the course materials to be used by the students.

Philosophical and Sociological Overview of Vocational Technical Education in Nigeria

ERIC Educational Resources Information Center

Kennedy, Odu Oji

2012-01-01

Vocational Technical Education is any kind of education which has the main purpose of preparing one for employment in recognized occupation. The foundation of vocational technical education is based on philosophy which was mainly established for self-employment and self-reliance of the individual(s) who partake in it. Viewing the philosophy and…

The Educational and Technical Courses in the ELT Program in Turkey: Do They Contribute to ICT Skills?

ERIC Educational Resources Information Center

Uzun, Levent

2016-01-01

The present study investigated the contribution of the educational and technical courses in the English Language Teacher Training Program (ELTTP) at universities in Turkey to the information and communication technologies (ICT) knowledge and skills of the students. The participants were 74 teachers/trainees who were attending their last year in…

Technical and Vocational Education in Nigeria: Issues, Challenges and a Way Forward

ERIC Educational Resources Information Center

Okoye, Reko; Arimonu, Maxwell Onyenwe

2016-01-01

Technical education, as enshrined in the Nigerian national policy on education, is concerned with qualitative technological human resources development directed towards a national pool of skilled and self reliant craftsmen, technicians and technologists in technical and vocational education fields. In Nigeria, the training of technical personnel…

Vocational-Technical Education; A Prospectus for Change.

ERIC Educational Resources Information Center

Schaefer, Carl J., Ed.; Kaufman, Jacob J., Ed.

To seek resolution of problems in providing education for youth and adults oriented toward the world of work, the Massachusetts Advisory Council on Education (MACE) undertook a study of vocational-technical education as a major project. This publication contains the major papers and prepared reactions to these papers, which were presented at a…

Carl D. Perkins Vocational and Technical Education Act of 1998, Report to Congress on State Performance, Program Year 2002-2003

ERIC Educational Resources Information Center

US Department of Education, 2005

2005-01-01

This is the fourth annual report to Congress by the US Department of Education. Among the highlights of this report are: (1) More students were reported by states as having enrolled in vocational and technical education courses in Program Year (PY) 2002-2003 than in the past three years; (2) There remain concerns about the quality and reliability…

Role of Scientific and Technical Libraries in Education and Technical Creative Work of the Soviet People.

ERIC Educational Resources Information Center

Tyshkevich, N. I.

Emphasis is placed on the role of scientific and technical libraries in the education of Soviet workers. One of the main tasks of technical libraries is to educate workers to respect their professions, and to maintain communistic attitudes towards labor. Librarians acquaint younger workers with literature on the history of their plants with…

Career and Technical Education in the Crossroads of Change

ERIC Educational Resources Information Center

Quailey, Janice

2012-01-01

Career and technical education (CTE) is faced with numerous forces that may impact its future. A variety of forces directly or indirectly affect CTE, ranging from the persisting stigma or negative image of career and technical education, the schools' curricular structure and requirements, along with federal laws such as No Child Left Behind (NCLB)…

Career-Technical Students in Baccalaureate Programs: Predictors of the Intent to Persist and Satisfaction with Educational Pathways

ERIC Educational Resources Information Center

Uranis, Julie

2015-01-01

This research explores the intersections of descriptive attributes, expectations, and influences (independent variables) and the degree to which they predict the intent to persist and satisfaction (dependent variables) of students enrolled in career-technical programs at four-year institutions. Little research exists for this population, and…

A Phenomenological Study Examining the Experiences of High School Graduates Who Participated in a Career and Technical Education Program of Study

ERIC Educational Resources Information Center

Goins, Camille Locklear

2015-01-01

Career and Technical Education (CTE) programs are designed to help prepare students to become effective workers by equipping them with college and career readiness skills needed for the 21st century workplace. Students who participate in a CTE Program of Study (POS) have the potential for greater success during and after high school because they…

Project T.E.A.M. (Technical Education Advancement Modules). Final Report.

ERIC Educational Resources Information Center

Greenville Technical Coll., SC.

Project TEAM (Technical Education Advancement Modules), a cooperative demonstration program for high technology training, created an introductory technical training program and a consumer education package emphasizing the benefits of technical training. The curriculum and training focus of the project began with an assessment of employee needs in…

Career and Technical Education at a Crossroads: A Delphi Study

ERIC Educational Resources Information Center

Cutright, Michael W.

2011-01-01

Career and technical education in the United States has reached a critical juncture. A three round Delphi method was used to determine a consensus on the future events of career and technical education to better inform educational decision makers. Forty-one individual experts in the field were invited to serve as panelists for the Delphi study and…

Cultural Literacy and Student Engagement: The Case of Technical and Vocational Education and Training (TVET) in Hong Kong

ERIC Educational Resources Information Center

Hui, Sammy King Fai; Cheung, Hoi Yan

2015-01-01

Technical and vocational education and training (TVET) is often seen to be constraining and focused on specific skill development for specific occupations. This goal is at odds with the demands of a knowledge economy that requires more general educational outcomes for an uncertain and unpredictable labour market. For this reason, Hui (2012) has…

New educational tools to encourage high-school students' activity in stem

NASA Astrophysics Data System (ADS)

Mayorova, Vera; Grishko, Dmitriy; Leonov, Victor

2018-01-01

Many students have to choose their future profession during their last years in the high school and therefore to choose a university where they will get proper education. That choice may define their professional life for many years ahead or probably for the rest of their lives. Bauman Moscow State Technical University conducts various events to introduce future professions to high-school students. Such activity helps them to pick specialization in line with their interests and motivates them to study key scientific subjects. The paper focuses on newly developed educational tools to encourage high school students' interest in STEM disciplines. These tools include laboratory courses developed in the fields of physics, information technologies and mathematics. More than 2000 high school students already participated in these experimental courses. These activities are aimed at increasing the quality of STEM disciplines learning which will result in higher quality of training of future engineers.

1983-84 Evaluation Report of Vocational and Technical Education in South Carolina.

ERIC Educational Resources Information Center

South Carolina State Advisory Council on Vocational and Technical Education, Columbia.

This evaluation report contains a series of articles on vocational and technical education encompassing the 1983-84 school year. The articles, collectively, are intended to give an overall picture of vocational and technical education programs in South Carolina. The lead article on technical education strongly urges several changes to bring about…

What Will It Take to Establish Technology/Engineering Education for All Students?

ERIC Educational Resources Information Center

Technology Teacher, 2008

2008-01-01

The growing national awareness of the importance of technical skills for "all students" opens up a tremendous opportunity for today's technology teachers. In this interview, Cary Sneider of the National Center for Technological Literacy at the Museum of Science, Boston, talks about how technology educators can establish clear standards…

Treatment of Race/Ethnicity in Career-Technical Education Research

ERIC Educational Resources Information Center

Rojewski, Jay W.; Xing, Xue

2013-01-01

This study examined how researchers of career-technical education have treated the construct of race/ethnicity in recent studies. Fifty-one of 71 articles published in the Career and Technical Education Research (CTER) over a 7-year span (2005-2011) were included. A content analysis found that only one quarter (n = 13, 25.49%) of eligible studies…

Implications for Focusing Research in Career and Technical Education and Workforce Development

ERIC Educational Resources Information Center

Lambeth, Jeanea M.; Joerger, Richard M.; Elliot, Jack

2009-01-01

Education and educational research is shaped by philosophy, psychology, practice, and ever changing educational policies. Previous studies have expressed a need for a relevant and focused research agenda for career and technical education (CTE), workforce development education and career and technical education. A need for a relevant and timely…

Advances in health informatics education: educating students at the intersection of health care and information technology.

PubMed

Kushniruk, Andre; Borycki, Elizabeth; Armstrong, Brian; Kuo, Mu-Hsing

2012-01-01

The paper describes the authors' work in the area of health informatics (HI) education involving emerging health information technologies. A range of information technologies promise to modernize health care. Foremost among these are electronic health records (EHRs), which are expected to significantly improve and streamline health care practice. Major national and international efforts are currently underway to increase EHR adoption. However, there have been numerous issues affecting the widespread use of such information technology, ranging from a complex array of technical problems to social issues. This paper describes work in the integration of information technologies directly into the education and training of HI students at both the undergraduate and graduate level. This has included work in (a) the development of Web-based computer tools and platforms to allow students to have hands-on access to the latest technologies and (b) development of interdisciplinary educational models that can be used to guide integrating information technologies into HI education. The paper describes approaches that allow for remote hands-on access by HI students to a range of EHRs and related technology. To date, this work has been applied in HI education in a variety of ways. Several approaches for integration of this essential technology into HI education and training are discussed, along with future directions for the integration of EHR technology into improving and informing the education of future health and HI professionals.

Dynamic Education as a Modern Education System of University

NASA Astrophysics Data System (ADS)

Buranská, Eva; Buranský, Ivan

2014-06-01

The contribution discusses the issue of modern education system of university. This method of education was designed within the KEGA project. Implementation of on-line classroom for dynamic education of the secondary technical school and university students focused on the design and manufacturing of freeform surfaces. The main objective of this teaching method of is improving the parent faculty cooperation with training centres and increasing the interest of secondary school students in the university studies of technical orientation.

Guidelines for Establishing and Evaluating High School Technical Electromechanics Programs.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Vocational, Technical and Adult Education.

Educators and industrial representatives developed these guidelines for school officials, instructors in technical education, and program and facility planners to use in planning a high school program in technical electromechanics. Designed to train students for entry into industry in applied electromechanics, the program includes electricity,…

Quality Assurance of Teachers in the Implementation of the Curriculum of Technical and Vocational Education in Colleges of Education (Technical) in North Cental Nigeria

ERIC Educational Resources Information Center

Attaochu, Egbita Ugbalu

2013-01-01

This study was carried out to ascertain the quality assurance of teachers (lecturers) in the implementation of the curriculum of Technical and Vocational Education (TVE) in Colleges of Education (Technical) in North Central Nigeria. Two research questions were formulated and answered in this study. Survey research and evaluation designs were…

Raising the Bar: Technical Assessments for Secondary CTE Programs

ERIC Educational Resources Information Center

Uy, Erin; Green, Kimberly

2009-01-01

Having a strong connection to the employer community, career technical education (CTE) has long understood the importance of students being armed with industry recognized credentials and certificates as they enter the workplace. The enactment of the Carl D. Perkins Career and Technical Education Act in 2006, commonly referred to as Perkins IV,…

Why Do the Growth Rates of Students, Enrollments and Hours Differ So Much between 2006 and 2007? Technical Paper

ERIC Educational Resources Information Center

Karmel, Tom; Mark, Kevin; Mlotkowski, Peter

2009-01-01

This technical paper examines some large and unusual movements for data in the 2007 VET (Vocational Education Training) Provider Collection by comparison with 2006. Changes in the patterns of courses undertaken explain most of the divergence between students, enrolments and hours. Appendices include: (1) Derivation of the decomposition; (2) Tables…

Future Directions for Research on Online Technical Education

ERIC Educational Resources Information Center

Horvitz, Brian S.

2017-01-01

Most research on online learning in higher education has been focused on general education at four-year institutions. There is a need for more research that focuses on online and hybrid education at community colleges in technical education fields. This issue includes articles from eight National Science Foundation funded projects doing innovative…

Education Industry, 2006

DTIC Science & Technology

2006-01-01

resulted in the U.S. Department of Education referring to it as Career and Technical Education (CTE). Minuteman High School, a highly successful...whole, and ultimately the students and the nation, will suffer the consequences. 7 Vocational Education The challenge for Career and Technical Education (CTE

At-Risk Learner Preference in Engineering/Technical Graphics: An Exploratory Study

ERIC Educational Resources Information Center

Ernst, Jeremy V.

2011-01-01

This exploratory study investigated learner preferences of secondary Career and Technical Education (CTE) Engineering/Technical Graphics students using the VARK Questionnaire. The VARK Questionnaire is an instrument that assists in determining students' dominant preferred learning styles, whether visual, aural, reading, or kinesthetic. This study…

Improving Technical Vocational Education and Training in the Kurdistan Region--Iraq

ERIC Educational Resources Information Center

Constant, Louay; Culbertson, Shelly; Stasz, Cathleen; Vernez, Georges

2014-01-01

As Iraq's Kurdistan region develops rapidly, it is creating jobs that require a solid education and technical skills. The government has launched an ambitious reform of basic and secondary education to increase its quality and has expanded opportunities for tertiary technical and university education. But expansion of secondary vocational…

The students' viewpoint on the quality gap in educational services.

PubMed

Rahim Khanli, Marziyeh; Daneshmandi, Hadi; Choobineh, Alireza

2014-07-01

Students and university community are social and human resources of the country. The students' viewpoints about the quality of educational services can be considered as a basis for planning quality promotion and improving organizational performance. This study was conducted to determine the quality gap in educational services by the students of Health and Nutrition School of Shiraz University of Medical Sciences. In this cross-sectional study, 140 students participated voluntarily (age range=19 to 40 years). The service quality (SERVQUAL) questionnaire was used for data collection. This questionnaire measured the quality gap in 5 dimensions of educational service including assurance, responsiveness, empathy, reliability, and tangibility. The students' perception about the current conditions and their expectations as to optimal conditions can be determined, using this questionnaire. The score of the gap in quality of educational services is calculated from difference between perception and expectation scores. Due to non-normality of data, non-parametric tests were used. To this end, data were analyzed by statistical tests including Wilcoxon, Friedman, Kruskal-Wallis and Mann-Whiteny tests in SPSS 14. The results showed that there was quality gap in all 5 dimensions of educational services. The largest and the smallest gaps were observed in "responsiveness" with a mean±SD of -0.94±0.74 and in "reliability" with a mean±SD of -0.76±0.69, respectively. There was a significant difference in quality gap between the 5 dimensions (p<0.001). According to the results, the students' expectations were higher than their perceptions of current conditions; also, in all aspects of the services their expectations were not met. It is recommended that workshops on customer services, communication skills and personnel's technical skills development should be planned and held. Also, allocating more resources for improving educational facilities and physical environment is

What Technical Writing Students Should Know about Typeface Personality

ERIC Educational Resources Information Center

Mackiewicz, Jo

2004-01-01

Typeface personality impacts the rhetorical effect of students' documents, yet it receives little attention in textbooks. Technical writing students should stand the definition of "appropriate" in relation to typeface selection, the difference between type's functional and semantic properties, the difference between type family and personality,…

An Approach to the Reuse of Technical Materials for Educational Purposes

NASA Technical Reports Server (NTRS)

Levinstein, Irwin; Bryant, Wayne H. (Technical Monitor)

2001-01-01

This project addresses the problem of transforming technical documents intended for a technical audience into educational materials directed toward segments of the general public. In particular it addresses the conversion of technical material into Internet based educational materials. A major consideration of the project is the conservation of the time of subject matter experts in the organization in recognition of the fact that such experts are likely to be more valuable to the organization for purposes other than the production of educational outreach.

Colonialism and Secondary Technical Education in Hong Kong: 1945-1997

ERIC Educational Resources Information Center

Lau, Wai Wah; Kan, Flora

2011-01-01

This study examines the influence of the colonial experience (1945-1997) on the planning of secondary technical education in Hong Kong. Specifically, the origins of secondary technical institutions and their positioning in secondary education are examined. Primary source materials are used as the basis of investigation and analysis, supplemented…

Educational technology for millennial dental hygiene students: a survey of U.S. dental hygiene programs.

PubMed

Beebe, Catherine R R; Gurenlian, JoAnn R; Rogo, Ellen J

2014-06-01

A growing body of literature suggests that today's learners have changed and education must change as well since Millennial generation students expect technology to be used in their coursework. This study sought to determine what educational technology is being used in U.S. dental hygiene programs, what student and faculty perceptions are of the effectiveness of technology, and what barriers exist to implementing educational technology. A stratified random sample of 120 entry-level dental hygiene programs nationwide were invited to participate in a survey. Fourteen programs participated, yielding a pool of 415 potential individual participants; out of those, eighty-four student and thirty-eight faculty respondents were included in the analysis, a total of 122. Results were analyzed using descriptive statistics and a Mann-Whitney U test (p<0.05). Faculty and student respondents agreed on the effectiveness of educational technology in all areas except clickers and wikis. The faculty members tended to rate the effectiveness of educational technology higher than did the students. The greatest perceived barrier to implementing technology was technical difficulties. This study suggests that support services should be available to faculty and students to ensure successful implementation of technology. Dental hygiene educators have adopted many types of educational technology, but more data are needed to determine best practices.

Matching Community and Technical College Professional/Technical Education Capacity to Employer Demand. Final Report.

ERIC Educational Resources Information Center

Sommers, Paul; Heg, Deena

A project was conducted to improve the state of Washington's community and technical college system by developing and using an improved occupational forecasting system to assess and respond to education and training needs. First, long-term occupational forecast data from Washington's Employment Security Department were matched with technical and…

IMPLICATIONS OF WOMEN'S WORK PATTERNS FOR PROGRAM DEVELOPMENT IN VOCATIONAL AND TECHNICAL EDUCATION.

ERIC Educational Resources Information Center

LEE, SYLVIA L.; AND OTHERS

THE IMPLICATIONS OF WOMEN'S LABOR FORCE PARTICIPATION FOR EDUCATORS AND LEADERS PLANNING PROGRAMS IN VOCATIONAL AND TECHNICAL EDUCATION WERE DERIVED AT A 2-DAY CONFERENCE BY 30 PEOPLE REPRESENTING THE VARIOUS SERVICES IN VOCATIONAL-TECHNICAL EDUCATION AND RELATED AREAS. IMPLICATIONS AND RECOMMENDATIONS FOR VOCATIONAL AND TECHNICAL EDUCATION…

National Centers for Career and Technical Education Annual Report, 2000.

ERIC Educational Resources Information Center

National Dissemination Center for Career and Technical Education, Columbus, OH.

The National Research Center for Career and Technical Education and the National Dissemination Center for Career and Technical Education were established at the University of Minnesota and The Ohio State University, respectively, in 1999. The centers operate as a consortium with primary and associate partners. Through the centers, the partners…

Efficiency in Resource Utilization in Education. Education and Development Technical Reports.

ERIC Educational Resources Information Center

Organisation for Economic Cooperation and Development, Paris (France). Directorate for Scientific Affairs.

This volume consists of papers presented at a meeting of scientific and technical personnel who examined and evaluated applications of systems analysis and operational research, and who related techniques to practical educational planning. Topics represent a variety of new management techniques available to educational administrators including…

Optimizing Technical Education Pathways: Does Dual-Credit Course Completion Predict Students' College and Labor Market Success?

ERIC Educational Resources Information Center

Phelps, L. Allen; Chan, Hsun-Yu

2016-01-01

Post-recession Federal policy initiatives, such as secondary/postsecondary career pathways and gainful employment higher education accountability standards, prioritize the alignment of education practices with market-driven outcomes. Using longitudinal student record data merged from college and state K-12 data systems with the Unemployment…

Cigarette Smoking and Cessation among Trade or Technical School Students in Texas

ERIC Educational Resources Information Center

Loukas, Alexandra; Murphy, Jonna L.; Gottlieb, Nell H.

2008-01-01

Although students enrolled in trade or technical colleges are at an elevated risk for tobacco use, virtually no information exists regarding their smoking behaviors. Objective and Participants: In the present study, the authors examined (1) the prevalence of smoking and quitting among 617 students in 2 trade or technical colleges in East Texas and…

Postsecondary Technical Education and the Energy Crisis.

ERIC Educational Resources Information Center

Riendeau, Albert J.

The energy problem affects virtually every wage earner in America and cries out for increased involvement by vocational and technical educators. A recent study by the National Planning Association points up the need to project future manpower demands in energy and energy-related industries so that the country's educational and training…

Career Opportunities: Career Technical Education and the College Completion Agenda. Part IV: Aligning Policy with Mission for Better Outcomes

ERIC Educational Resources Information Center

Shulock, Nancy; Moore, Colleen

2013-01-01

The California Community Colleges are vital to closing the projected shortfall of Californians with a postsecondary credential and sustaining the state's economic competitiveness. Increasing the number of students who pursue and earn certificates and associate degrees in career technical education (CTE) fields is an important component of the…

Analysis of the Contribution to Professional Knowledge of the Job Training within the Student Perspective in the 3+1 Education Model--The Example of Honaz Vocational School

ERIC Educational Resources Information Center

Aksit, Adnan; Arpat, Bulent; Kalfa, Veli Riza

2017-01-01

A well-educated and qualified workforce is one of the most important outputs in vocational and technical education. Vocational schools constitute the last circle in Turkey for the preparing students about the vocational and technical education in order to meet the need for the intermediate staff needed by the labor market. The educational model…

Education, Technical Progress, and Economic Growth: The Case of Taiwan.

ERIC Educational Resources Information Center

Lin, T.-C.

2003-01-01

Investigates the effect of education and the role of technical progress on economic growth in Taiwan from 1965-2000. Finds that education has a positive and significant effect on growth, but the role of technical progress does not appear to be extraordinarily important. Furthermore, no markedly significant relationships exist between capital and…

Career and Technical Education. 2015 Annual Report

ERIC Educational Resources Information Center

Utah System of Higher Education, 2015

2015-01-01

Career and Technical Education (CTE) is a key ingredient to meet the needs of Utah's economy. Utah System of Higher Education (USHE) institutions offer CTE programs in all regions of the state, working closely with local business and industry leaders to develop and deliver programs specifically tailored to local workforce development needs. This…

Career and Technical Education. 2016 Annual Report

ERIC Educational Resources Information Center

Utah System of Higher Education, 2016

2016-01-01

Career and Technical Education (CTE) is a key ingredient to meet the needs of Utah's economy. Utah System of Higher Education (USHE) institutions offer CTE programs in all regions of the state, working closely with local business and industry leaders to develop and deliver programs specifically tailored to local workforce development needs. This…

The Influence of Career-Focused Education on Student Career Planning and Development: A Comparison of CTE and Non-CTE Students

ERIC Educational Resources Information Center

Mobley, Catherine; Sharp, Julia L.; Hammond, Cathy; Withington, Cairen; Stipanovic, Natalie

2017-01-01

Our study is part of a broader longitudinal study of a state-mandated career-focused school reform policy. We investigate whether career and technical education (CTE) and non-CTE students differed in interactions with guidance counselors, level of participation in career planning and development, and beliefs about the relevance of having a career…

Reinventing the American High School for the 21st Century: Strengthening a New Vision for the American High School through the Experiences and Resources of Career and Technical Education. A Position Paper

ERIC Educational Resources Information Center

Meeder, Hans

2006-01-01

The Association for Career and Technical Education (ACTE), on behalf of career and technical education (CTE) professionals in the United States, advocates for clearly focusing American high schools on the goal of preparing every student for full participation in a spectrum of college opportunities, meaningful work, career advancement, and active…

Effective and Ethical Recruitment of Vocational Education Students. Overview. ERIC Digest No. 61.

ERIC Educational Resources Information Center

Naylor, Michele

Vocational education has suffered enrollment problems simply because there are fewer students today than a few years ago. Other factors that have hurt vocational enrollments include recent efforts to increase the number of academic credits required for graduation, and in the case of area vocational-technical schools, negative attitudes toward…

Toward the Development of a Program Quality Framework for Career and Technical Education Programs: A Researcher-Practitioner Collaborative Project

ERIC Educational Resources Information Center

Brodersen, R. Marc; Yanoski, David; Hyslop, Alisha; Imperatore, Catherine

2016-01-01

Career and technical education (CTE) programs of study are subject to rigorous state and federal accountability systems that provide information on key student outcomes. However, while these outcome measures can form a basis for identifying high- and low-performing programs, they are insufficient for answering underlying questions about how or why…

Tribal Colleges and Universities/American Indian Research and Education Initiatives Advanced Manufacturing Technical Assistance Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Atcitty, Stanley

The overall goal of this project is to establish a network of TCUs with essential advanced manufacturing (AM) facilities, associated training and education programs, and private sector and federal agency partnerships to both prepare an American Indian AM workforce and create economic and employment opportunities within Tribal communities through design, manufacturing, and marketing of high quality products. Some examples of high quality products involve next generation grid components such as mechanical energy storage, cabling for distribution of energy, and electrochemical energy storage enclosures. Sandia National Laboratories (Sandia) is tasked to provide technical advising, planning, and academic program development support formore » the TCU/American Indian Higher Education Consortium (AIHEC) Advanced Manufacturing Project. The TCUs include Bay Mills Community College (BMCC), Cankdeska Cikana Community College (CCCC), Navajo Technical University (NTU), Southwestern Indian Polytechnic Institute (SIPI), and Salish Kooteani College. AIHEC and Sandia, with collaboration from SIPI, will be establishing an 8-week summer institute on the SIPI campus during the summer of 2017. Up to 20 students from TCUs are anticipated to take part in the summer program. The goal of the program is to bring AM science, technology, engineering, and mathematics (STEM) awareness and opportunities for the American Indian students. Prior to the summer institute, Sandia will be providing reviews on curriculum plans at the each of the TCUs to ensure the content is consistent with current AM design and engineering practice. In addition, Sandia will provide technical assistance to each of the TCUs in regards to their current AM activities.« less

EDUCATIONAL STABILITY IN AN UNSTABLE TECHNICAL SOCIETY.

ERIC Educational Resources Information Center

LESSINGER, LEON

CURRENT OPINION REGARDING THE ROLE OF THE HIGH SCHOOL IN PROFESSIONAL, TECHNICAL, AND VOCATIONAL EDUCATION IS THAT CHANGES IN TECHNOLOGY MAKE IT IMPOSSIBLE FOR SCHOOLS TO DO ANY TRAINING OTHER THAN GENERAL EDUCATION, OR THAT YOUTH SHOULD BE TRAINED WITH ONLY IMMEDIATE SALEABLE SKILLS BECAUSE THEY WILL HAVE SEVERAL CAREERS BEFORE RETIRING AND WILL…

Career Satisfaction Following Technical Education

ERIC Educational Resources Information Center

McDonald, Betty Manager

2011-01-01

The effect of career and technical education in the Caribbean is an area of intervention research that needs more attention. This present research is the first of its kind within the region. The study benefits from a large sample size (N = 500) conducted among a non-traditional population in the field of career development. This paper reports on…

An Assessment of the Support Service Needs of Career and Technical Education Teachers and Their Students with Limited English Proficiency in Selected Pennsylvania AVTS's

ERIC Educational Resources Information Center

Wichowski, Chester P.; Nunez, Frances

2005-01-01

A survey was conducted among a population of 350 Career and Technical Education, CTE, teachers from 12 Career Technical Education Centers, CTC, sites in seven counties throughout Pennsylvania (return rate = 64%). The participating schools demographic settings, which were selected by the respondents, were closely divided between rural (37.9%) and…

An interprofessional education session for first-year health science students.

PubMed

Cameron, Andrea; Ignjatovic, Milka; Langlois, Sylvia; Dematteo, Dale; DiProspero, Lisa; Wagner, Susan; Reeves, Scott

2009-07-10

To implement and evaluate the effectiveness and short-term impact of an interprofessional education (IPE) session in the first year for health sciences students representing 9 health professions. An interprofessional faculty committee created a 2(1/2) hour introductory interprofessional education session focusing on a single patient case and 2 possible discharge scenarios. A mixed method pretest/posttest research design was used to examine changes in students' perceptions of and attitudes toward IPE. Six follow-up focus groups also were held with students from the participating professions. Of 1197 health professions students enrolled, 914 students (76%) attended the IPE session. Two hundred thirty-two of 240 pharmacy students (97%) attended. Forty-three (18.5%) pharmacy students responded to the open-ended questions on the survey instrument. The most frequently reported gains from attending the session were recognition of teamwork importance to benefit the patient (30%) and understanding of other professionals' roles (29%). Shortfalls reported by students related to the content/style of presentation (26%) and technical/organizational (23%) aspects of the session. Pharmacy students who participated in one of the focus groups stated the session demonstrated the benefits as well as facilitators and barriers to collaborative care. The session served as an effective introduction to IPE; debriefing and integration with uniprofessional curricula should occur. Students need additional small group interaction with other health professional students, and can contribute as members of the planning committee.

An Interprofessional Education Session for First-Year Health Science Students

PubMed Central

Ignjatovic, Milka; Langlois, Sylvia; Dematteo, Dale; DiProspero, Lisa; Wagner, Susan; Reeves, Scott

2009-01-01

Objective To implement and evaluate the effectiveness and short-term impact of an interprofessional education (IPE) session in the first year for health sciences students representing 9 health professions. Design An interprofessional faculty committee created a 2½ hour introductory interprofessional education session focusing on a single patient case and 2 possible discharge scenarios. A mixed method pretest/posttest research design was used to examine changes in students' perceptions of and attitudes toward IPE. Six follow-up focus groups also were held with students from the participating professions. Assessment Of 1197 health professions students enrolled, 914 students (76%) attended the IPE session. Two hundred thirty-two of 240 pharmacy students (97%) attended. Forty-three (18.5%) pharmacy students responded to the open-ended questions on the survey instrument. The most frequently reported gains from attending the session were recognition of teamwork importance to benefit the patient (30%) and understanding of other professionals' roles (29%). Shortfalls reported by students related to the content/style of presentation (26%) and technical/organizational (23%) aspects of the session. Pharmacy students who participated in one of the focus groups stated the session demonstrated the benefits as well as facilitators and barriers to collaborative care. Conclusion The session served as an effective introduction to IPE; debriefing and integration with uniprofessional curricula should occur. Students need additional small group interaction with other health professional students, and can contribute as members of the planning committee. PMID:19657495

RESEARCH AND DEVELOPMENT PRIORITIES IN TECHNICAL EDUCATION, A REPORT OF A NATIONAL RESEARCH PLANNING CONFERENCE IN TECHNICAL EDUCATION (THE OHIO STATE UNIVERSITY, JANUARY 10-11, 1967).

ERIC Educational Resources Information Center

MILLER, AARON J.

A SELECT GROUP OF PARTICIPANTS REPRESENTING NATIONAL LEADERSHIP IN BUSINESS, INDUSTRY, RESEARCH, GOVERNMENT, AND EDUCATION MET TO IDENTIFY SOME OF THE MOST OBVIOUS NEW EMERGING TECHNICAL OCCUPATIONS WHICH MIGHT REQUIRE RESEARCH AND DEVELOPMENT EFFORTS AND SOME OF THE MOST PRESSING RESEARCHABLE PROBLEM AREAS IN TECHNICAL EDUCATION. THE NEW OR…

Nursing students assess nursing education.

PubMed

Norman, Linda; Buerhaus, Peter I; Donelan, Karen; McCloskey, Barbara; Dittus, Robert

2005-01-01

This study assessed the characteristics of nursing students currently enrolled in nursing education programs, how students finance their nursing education, their plans for clinical practice and graduate education, and the rewards and difficulties of being a nursing student. Data are from a survey administered to a national sample of 496 nursing students. The students relied on financial aid and personal savings and earnings to finance their education. Parents, institutional scholarships, and government loans are also important sources, but less than 15% of the students took out bank loans. Nearly one quarter of the students, particularly younger and minority students, plan to enroll in graduate school immediately after graduation and most want to become advanced nursing practitioners. Most of the nursing students (88%) are satisfied with their nursing education and nearly all (95%) provided written answers to two open-ended questions. Comments collapsed into three major categories reflecting the rewards (helping others, status, and job security) and three categories reflecting the difficulties (problems with balancing demands, quality of nursing education, and the admissions process) of being a nursing student. Implications for public policymaking center on expanding the capacity of nursing education programs, whereas schools themselves should focus on addressing the financial needs of students, helping them strike a balance among their school, work, and personal/family responsibilities and modifying certain aspects of the curriculum.

Contribution of ethics education to the ethical competence of nursing students: educators' and students' perceptions.

PubMed

Cannaerts, Nancy; Gastmans, Chris; Dierckx de Casterlé, Bernadette

2014-12-01

To review the literature on perceptions of nursing students and/or educators on the contribution of ethics education to ethical competence in nursing students. Nurses do not always demonstrate the competencies necessary to engage in ethical practice. Educators continue to debate about the best ways to teach ethics to nurses so that they can develop ethical competencies. MEDLINE, Embase, CINAHL, PsycINFO, and Web of Science. A total of 15 articles with a quantitative, qualitative, or mixed-methods design published between January 1992 and March 2012 were analyzed. According to students and educators, ethics education increases ethical perception of nursing students and the development of reflective and analytical skills. However, its contribution to the development of ethical behavior was barely mentioned. The accounts of students and educators revealed essential features of effective ethics education: active involvement of students in case study discussions and use of ethical frameworks. The use of activating educational strategies requires a safe learning environment where students can openly reflect on values at stake in their care practice. A better understanding of how students learn to develop ethical skills and of influencing factors can guide educators to develop ethics courses for nursing curriculum. Future research needs to focus on the methodological accuracy of sampling and measuring instruments. © The Author(s) 2014.

Aiming for excellence - A simulation-based study on adapting and testing an instrument for developing non-technical skills in Norwegian student nurse anaesthetists.

PubMed

Flynn, Fiona M; Sandaker, Kjersti; Ballangrud, Randi

2017-01-01

There is increasing focus on building safety into anaesthesia practice, with excellence in anaesthesia as an aspirational goal. Non-technical skills are an important factor in excellence and improved patient safety, though there have been few systematic attempts at integrating them into anaesthesia nursing education. This study aimed to test the reliability of NANTS-no, a specially adapted behavioural marker system for nurse anaesthetists in Norway, and explore the development of non-technical skills in student nurse anaesthetists. The pre-test post-test design incorporated a 10-week simulation-based programme, where non-technical skills in 14 student nurse anaesthetists were rated on three different occasions during high-fidelity simulation, before and after taking part in a training course. NANTS-no demonstrated high overall inter-rater reliability (ICC = 0.91), high test-retest reliability (ICC = 0.94) and good internal consistency (Cronbach's α of 0.85-0.92). A significant improvement was demonstrated across all categories of non-technical skills, with greatest improvements between the first and third and second and third sessions. There was also a significant improvement in two categories between the first and second sessions. NANTS-no is therefore suitable for assessing non-technical skills during simulation training in anaesthesia nursing education. More research is needed to validate its use in clinical practice. Copyright © 2016 Elsevier Ltd. All rights reserved.

Challenges of the Future in Postsecondary Occupational Education. Fourth Conference on New Horizons in Community College Occupational-Technical Education (4th, Blacksburg, Virginia, October 31, November 1-2, 1976).

ERIC Educational Resources Information Center

Hoerner, James L., Ed.

Approximately 135 instructors, counselors, division directors, deans, presidents, university personnel, and graduate students from ten states participated in a fourth annual conference on New Horizons in Community College Occupational-Technical Education reported in this document. The general purpose of the conference was to examine current views…

Procedural Influence on Internal and External Assessment Scores of Undergraduate Vocational and Technical Education Research Projects in Nigerian Universities

ERIC Educational Resources Information Center

A. C., John; Manabete, S. S.

2015-01-01

This study sought to determine the procedural influence on internal and external assessment scores of undergraduate research projects in vocational and technical education programmes in the university under study. A survey research design was used for the conduct of this study. The population consisted of 130 lecturers and 1,847 students in the…

Technical writing versus technical writing

NASA Technical Reports Server (NTRS)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

How Should "Quality" Technical Education and Training Be Defined? A Statement from the National Council for Occupational Education.

ERIC Educational Resources Information Center

Everett, James; Gershwin, Mary; Hayes, Homer; Jacobs, James; Mundhenk, Robert

Although objectively measurable achievement of outcomes is an important guide to the quality of education, the process of defining and assuring the quality of technical education and training must include consideration for the context in which technical education and training occurs. It is also critical to remember that education has two sets of…

Safety Education--An Essential Element of Technical Training

ERIC Educational Resources Information Center

Glazener, Everett R.; Comstock, Thomas W.

1978-01-01

After tracing the background of the safety movement, provisions of recent safety legislation, and the ecological and environmental impact of industrial processes, the author stresses the need for safety education in technical education programs to prepare future employees for industrial safety requirements. (MF)

South Carolina TEC Student Code.

ERIC Educational Resources Information Center

Edwards, C. A., Ed.; Kiser, J. A., Ed.

This student code has statewide application to South Carolina Technical Colleges and Technical Education Centers (TEC). Provisions are divided into eight articles: (1) General Provisions, including the purpose of a student code, the precept of internal solution of problems, and definitions; (2) Student Rights, including Bill of Rights protections;…

The evaluation of a framework for measuring the non-technical ward round skills of final year nursing students: An observational study.

PubMed

Murray, Kara; McKenzie, Karen; Kelleher, Michael

2016-10-01

The importance of non-technical skills (NTS) to patient outcomes is increasingly being recognised, however, there is limited research into how such skills can be taught and evaluated in student nurses in relation toward rounds. This pilot study describes an evaluation of a NTS framework that could potentially be used to measure ward round skills of student nurses. The study used an observational design. Potential key NTS were identified from existing literature and NTS taxonomies. The proposed framework was then used to evaluate whether the identified NTS were evident in a series of ward round simulations that final year general nursing students undertook as part of their training. Finally, the views of a small group of qualified nurse educators, qualified nurses and general nursing students were sought about whether the identified NTS were important and relevant to practice. The proposed NTS framework included seven categories: Communication, Decision Making, Situational Awareness, Teamwork and Task Management, Student Initiative and Responsiveness to Patient. All were rated as important and relevant to practice. The pilot study suggests that the proposed NTS framework could be used as a means of evaluating student nurse competencies in respect of many non-technical skills required for a successful ward round. Further work is required to establish the validity of the framework in educational settings and to determine the extent to which it is of use in a non-simulated ward round setting. Copyright © 2016 Elsevier Ltd. All rights reserved.

Relevance in Basic Composition: Writing Assignments for Technical Students.

ERIC Educational Resources Information Center

Tichenor, Stuart

Generally, students in vocational and technical colleges are in writing classes because they must be, not because they want to be. As a rule, students in basic composition classes have been more or less continually exposed to writing classes since middle school where they been asked to keep journals, read articles and short stories, and write…

Practical of Ethics Education in Junior High School Technical Arts

NASA Astrophysics Data System (ADS)

Iwata, Ryo; Hirano, Shigeo

Now, such as forgery, camouflage, concealment, and the alteration, the problems resulting from lack of the sense of ethics are occurring frequently. The department of junior high school technical arts to engineering ethics education is required for the solution. However, the example of introducing the ethics education is few in a current junior high school technical arts department. It is considered that it leads to a further improvement of the morality consideration by teaching from a past case to the engineering ethics at the stage of the compulsory education. In this thesis, it reports on the execution contents and an educational result.

Personality Type Profiles of Beginning Secondary Technical Education Teachers in West Virginia.

ERIC Educational Resources Information Center

Gordon, Howard R. D.

A study developed and examined personality type preference profiles of beginning secondary technical education teachers in West Virginia. The target population consisted of all beginning secondary technical education teachers (n=34) employed by the West Virginia Department of Education during the 1998-99 school year. The Myers-Briggs Type…

15 CFR 295.11 - Technical and educational services for ATP recipients.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS ADVANCED TECHNOLOGY PROGRAM General § 295.11 Technical and educational services for ATP recipients... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Technical and educational services for...

Entrepreneurial Attitude and Entrepreneurial Efficacy of Technical Secondary School Students

ERIC Educational Resources Information Center

Zaidatol Akmaliah, Lope Pihie; Bagheri, Afsaneh

2010-01-01

Entrepreneurial attitude and entrepreneurial efficacy are considered to be two important factors influencing students' intention and success in becoming entrepreneurs. This study was conducted to determine the entrepreneurial attitude and entrepreneurial efficacy of 3000 students following technical subjects in the secondary schools of Malaysia.…

Active learning in the space engineering education at Technical University of Madrid

NASA Astrophysics Data System (ADS)

Rodríguez, Jacobo; Laverón-Simavilla, Ana; Lapuerta, Victoria; Ezquerro Navarro, Jose Miguel; Cordero-Gracia, Marta

This work describes the innovative activities performed in the field of space education at the Technical University of Madrid (UPM), in collaboration with the center engaged by the European Space Agency (ESA) in Spain to support the operations for scientific experiments on board the International Space Station (E-USOC). These activities have been integrated along the last academic year of the Aerospatiale Engineering degree. A laboratory has been created, where the students have to validate and integrate the subsystems of a microsatellite by using demonstrator satellites. With the acquired skills, the students participate in a training process centered on Project Based Learning, where the students work in groups to perform the conceptual design of a space mission, being each student responsible for the design of a subsystem of the satellite and another one responsible of the mission design. In parallel, the students perform a training using a ground station, installed at the E-USOC building, which allow them to learn how to communicate with satellites, how to download telemetry and how to process the data. This also allows students to learn how the E-USOC works. Two surveys have been conducted to evaluate the impact of these techniques in the student engineering skills and to know the degree of satisfaction of students with respect to the use of these learning methodologies.

Developing professionalism in Italian medical students: an educational framework

PubMed Central

Consorti, Fabrizio; Notarangelo, Mariagiovanna; Potasso, Laura; Toscano, Emanuele

2012-01-01

Developing and assessing professionalism in medical students is an international challenge. This paper, based on preliminary research at the Faculty of Medicine and Dentistry of the University Sapienza of Rome, Italy, briefly summarizes the main issues and experiences in developing professionalism among Italian undergraduate medical students. It concludes with a proposed framework suited to the Italian medical curricula. In our educational system, professionalism is defined as the context of medical expertise, the combination of rules, conditions, and meanings in which the act of health care occurs, as well as the ability of critical reflection on technical expertise. It is a multidimensional construct of ethical, sociocultural, relational, and epistemological competencies, requiring a wide range of tools for assessment. With reference to Italian versions of validated tools of measure, vignettes, videos, and a student’s portfolio of reflective writings, this paper outlines the manner in which education for professionalism is embedded in the existing curriculum and overall framework of assessment. PMID:23762002

Moving from Technical and Further Education to University: An Australian Study of Mature Students

ERIC Educational Resources Information Center

Abbott-Chapman, Joan

2006-01-01

Longitudinal research, conducted between 1999 and 2002, tracked the academic progress of a small sample of mature students entering the University of Tasmania, Australia, from a disadvantaged region of Tasmania to pursue degrees in accounting and education. Both quantitative and qualitative methods were used to examine the impact of alternative…

Adobe connect as a viable tool for educating Russian students by American professors

NASA Astrophysics Data System (ADS)

Tulinov, B. M.; Myakinina, N. P.; Tworek, A. R.; Mazetov, O. Y.

2017-01-01

This article explores the possibility of using videoconferencing via Adobe Connect software as a new form of distance learning and contains a case study of inviting leading professors from top universities of the United States of America to participate in the educational process of the students of the Institute of International Relations, NRNU MEPhI. The article describes the general course structure and the technical means used for setting up the course, discloses the technique used to ensure active student participation and outlines the key competencies that students are expected to gain after completing the course. The conclusions drawn from this case study can be of interest when solving the issues of modern techniques used for online distance education. The authors hope that these forms of education will also indirectly contribute to the stabilization of relations between the Russian Federation and the United States of America on a non-governmental level in the field of international scientific and technological cooperation.

Introducing medical students to careers in medical education: the student track at an annual medical education conference.

PubMed

Blatt, Benjamin; Plack, Margaret; Suzuki, Mari; Arepalli, Sruthi; Schroth, Scott; Stagnaro-Green, Alex

2013-08-01

Few avenues exist to familiarize medical students with careers as clinician-educators, and the clinician-educator career pathway has not been well defined. In this article, the authors describe how they integrated a career-oriented student track into the 2011 Northeast Group on Educational Affairs (NEGEA) annual retreat to introduce students to careers in medical education. Annual education conferences are principal sources of educational scholarship, networking, collaboration, and information sharing; as such, they represent attractive venues for early exposure to the culture of medical education. The authors' goal in creating the NEGEA conference student track was to excite students about careers in medical education by providing them with an array of opportunities for active involvement in both student-specific and general conference activities.The authors draw from their experience to provide a guide for recruiting student participants to career-building student tracks. They also offer a guide for developing future student tracks, based on their experience and grounded in social cognitive career theory. Although their focus is on medical education, they believe these guides will be useful for educators planning a conference-based student track in any field.

Simulated lumbar minimally invasive surgery educational model with didactic and technical components.

PubMed

Chitale, Rohan; Ghobrial, George M; Lobel, Darlene; Harrop, James

2013-10-01

The learning and development of technical skills are paramount for neurosurgical trainees. External influences and a need for maximizing efficiency and proficiency have encouraged advancements in simulator-based learning models. To confirm the importance of establishing an educational curriculum for teaching minimally invasive techniques of pedicle screw placement using a computer-enhanced physical model of percutaneous pedicle screw placement with simultaneous didactic and technical components. A 2-hour educational curriculum was created to educate neurosurgical residents on anatomy, pathophysiology, and technical aspects associated with image-guided pedicle screw placement. Predidactic and postdidactic practical and written scores were analyzed and compared. Scores were calculated for each participant on the basis of the optimal pedicle screw starting point and trajectory for both fluoroscopy and computed tomographic navigation. Eight trainees participated in this module. Average mean scores on the written didactic test improved from 78% to 100%. The technical component scores for fluoroscopic guidance improved from 58.8 to 52.9. Technical score for computed tomography-navigated guidance also improved from 28.3 to 26.6. Didactic and technical quantitative scores with a simulator-based educational curriculum improved objectively measured resident performance. A minimally invasive spine simulation model and curriculum may serve a valuable function in the education of neurosurgical residents and outcomes for patients.

Computer Supported Education at Fox Valley Technical Institute. IBM Application Brief.

ERIC Educational Resources Information Center

International Business Machines Corp., White Plains, NY.

Fox Valley Technical Institute (FVTI) has developed an approach to education which emphasizes competency-based, round-the-clock education entailing short terms, flexible class schedules, and individualized instruction and which has as its focus strong computer support at classroom, technical, and management levels. The college provides 6,000…

10 CFR 4.322 - Written notice, technical assistance, and educational materials.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Written notice, technical assistance, and educational... the Age Discrimination Act of 1975, as Amended Duties of Nrc Recipients § 4.322 Written notice, technical assistance, and educational materials. (a) NRC will provide written notice to each recipient of...

The Labor Market Returns to a Community College Education for Non-Competing Students. A CAPSEE Working Paper

ERIC Educational Resources Information Center

Bahr, Peter Riley

2016-01-01

In this study, I use data from California to estimate the returns to a community college education for students who do not complete postsecondary credentials. I find strong, positive returns to completed credits in career and technical education (CTE) fields that are closely linked to employment sectors that are not credential-intensive, such as…

Career and Technical Education Administration: Requirements, Certification/Licensure, and Preparation

ERIC Educational Resources Information Center

Zirkle, Christopher J.; Jeffery, Jeremy O.

2017-01-01

The current climate of career and technical administration requirements in all 50 states was detailed and explored. An increasing number of states are not requiring specific career-technical administration certification/licensure in order to oversee secondary career and technical education (CTE) programs, with more states moving towards a general…

The Predictive Validity of the Minnesota Reading Assessment for Students in Postsecondary Vocational Education Programs.

ERIC Educational Resources Information Center

Brown, James M.; Chang, Gerald

1982-01-01

The predictive validity of the Minnesota Reading Assessment (MRA) when used to project potential performance of postsecondary vocational-technical education students was examined. Findings confirmed the MRA to be a valid predictor, although the error in prediction varied between the criterion variables. (Author/GK)

CHARACTERISTICS OF THE TECHNICAL EDUCATION STUDENT.

ERIC Educational Resources Information Center

MILLER, AARON J.

THE POST-HIGH SCHOOL TRAINEE SHOULD BE A HIGH SCHOOL GRADUATE OR THE EQUIVALENT. A FAIR DEGREE OF PROFICIENCY IN MATHEMATICS AND SCIENCE IS REQUIRED. IT IS REASONABLE TO EXPECT THE COMPLETION OF 2 YEARS OF HIGH SCHOOL MATHEMATICS AND 1 YEAR OF HIGH SCHOOL SCIENCE. SOME BACKGROUND IN DRAFTING AND SHOP IS DESIRABLE. THE STUDENT SHOULD BE AVERAGE OR…

78 FR 35877 - Applications for New Awards; Native Hawaiian Career and Technical Education Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-14

... attain career and technical skills; (7) The use of student assessment and evaluation data to improve... the industry the student is preparing to enter; (iv) Activities, during the formative stages of the... students' technical assessments, by type and scores, if available; (vii) The rates of attainment of a...

Technical Education and Vocational Training in Developing Nations

ERIC Educational Resources Information Center

Okolie, Ugochukwu Chinonso, Ed.

2017-01-01

Severe economic depression and the difficulty to acquire employment with adequate income have significant impact on a nation's social welfare. The need to provide ample educational opportunities is more imperative than ever, particularly in emerging economies. "Technical Education and Vocational Training in Developing Nations" is a…

Efficiency of Australian Technical and Further Education Providers

ERIC Educational Resources Information Center

Fieger, Peter; Villano, Renato; Cooksey, Ray

2016-01-01

Budgetary constraints on the public purse have led Australian Federal and State governments to focus increasingly on the efficiency of public institutions, including Technical and Further Education (TAFE) institutes. In this study, we define efficiency as the relationship between financial and administrative inputs and educational outputs. We…

Technology in education: A guidebook for developing a science and math education support program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, C.L.

1992-09-01

Education is vital to survival and success in an increasingly technical world, and the quality of education is the responsibility of everyone students, teachers, parents, industry, and government. Any technical organization wanting to contribute to that success through its local education system can do so easily and effectively through careful planning. This report details that planning process and includes methods to (1) identify the interests, strengths, and resources of the technical organization; (2) identify the needs of the local education system; (3) interface with local school system administration, principals, and teachers; and (4) develop a unique plan to match themore » organization's strengths and resources with the needs of the school system. Following these getting started'' activities is the actual program that the Engineering Technology Division implemented in a local elementary school, including the curriculum, topics, and actual lesson plans used by technical personnel in the classroom. Finally, there are enrichment activities for teachers and students, suggestions for measuring the success of an education support program, and an overview of student responses to questions about the overall program.« less

Technology in education: A guidebook for developing a science and math education support program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, C.L.

1992-09-01

Education is vital to survival and success in an increasingly technical world, and the quality of education is the responsibility of everyone students, teachers, parents, industry, and government. Any technical organization wanting to contribute to that success through its local education system can do so easily and effectively through careful planning. This report details that planning process and includes methods to (1) identify the interests, strengths, and resources of the technical organization; (2) identify the needs of the local education system; (3) interface with local school system administration, principals, and teachers; and (4) develop a unique plan to match themore » organization`s strengths and resources with the needs of the school system. Following these ``getting started`` activities is the actual program that the Engineering Technology Division implemented in a local elementary school, including the curriculum, topics, and actual lesson plans used by technical personnel in the classroom. Finally, there are enrichment activities for teachers and students, suggestions for measuring the success of an education support program, and an overview of student responses to questions about the overall program.« less

Health Related Occupations. Revised Summary Report: Technical Employment in Northeast Florida.

ERIC Educational Resources Information Center

Baker, William E.; And Others

The document is one of five summary reports, all part of a Pre-Technical Curriculum Planning Project for secondary students who aspire to technical employment or post secondary technical education. This report represents the results of an assessment of the northeast Florida area's technical occupations in health related occupations. A three-phase…

MSWT-01, an alternative in combining Production Based Education (PBE) and student CSR program in Polman

NASA Astrophysics Data System (ADS)

Ananto, Gamawan; Setiawan, Albertus B.; Z, Darman M.

2014-06-01

MSWT-01, Mobile Surface Water Treatment, producing 1m3 per hour, is an alternative for providing clean water in flood disaster areas, and was developed at Bandung State Polytechnic for Manufacturing (Polman) as a part of institution research project. The combination of cartridge or membrane technology such as carbon block, MF, UF and filtration media is used for this machine, instead of coagulation-flocculation with chemical addition, due to emergency purposes related with its treatment processing time. The idea is that MSWT could be combined with Production Based Education (PBE) concept in Polman as a vocational education institution and students 'CSR', students social activities. With the number of implementation trials in real flood area condition, MSWT will be developed further based on the technical output result. The manufacturing process for improving or adding necessary features could be implemented as a student's project in PBE system. This might be an ideal combination alternative for such vocational institution that students get the product media for their PBE program and implement their work as a defined social activity. They will learn and experience related technical matters and more social interactions with the people and other disaster stakeholder as well.

Introducing Development Education in Technical Universities: Successful Experiences in Spain

ERIC Educational Resources Information Center

Boni, A.; Perez-Foguet, A.

2008-01-01

This paper presents and analyses the main characteristics of successful experiences of Development Education (DE) introduced in two major Spanish Technical Universities (Technical University of Catalonia, TUC, and Technical University of Valencia, TUV) during the nineties and the beginning of the twenty-first century. In this paper, after a brief…

State of the Art Report on Statewide Student Competency Testing in Vocational and Technical Education, 1993-94.

ERIC Educational Resources Information Center

Love-Wilkes, Rebecca; Cummings, Ronda

This report on competency testing in vocational and technical education is a follow-up to previous reports published in 1988 and 1990. Section 1 summarizes the data. It describes competency testing in the 13 states that currently mandate competency testing and identifies the 11 states in which voluntary testing is occurring, the 9 states either…

Technical Working Group on Career and Technical Education Meeting. Meeting Summary (Washington, DC, September 22, 2017)

ERIC Educational Resources Information Center

Ahn, Judie

2017-01-01

On September 22, 2017, the National Center for Special Education Research (NCSER) and the National Center for Education Research (NCER) at the Institute of Education Sciences (IES) convened a group of experts in policy, practice, and research related to Career and Technical Education (CTE). The goal of the meeting was to seek input from…

Delaware GK-12: Improvement of Science Education in Vocational Technical High Schools Through Collaborative Learning and Coteaching

NASA Astrophysics Data System (ADS)

Madsen, J.; Skalak, K.; Watson, G.; Scantlebury, K.; Allen, D.; Quillen, A.

2006-12-01

With funding from the National Science Foundation, the University of Delaware (UD) in partnership with the New Castle County Vocational Technical School District (NCCoVoTech) in Delaware has initiated a GK-12 Program. In each of year this program, nine full time UD graduate students in the sciences, who have completed all or most of their coursework, will be selected to serve as fellows. Participation in the GK-12 program benefits the graduate fellows in many ways. In addition to gaining general insight into current issues of science education, the fellows enhance their experience as scientific researchers by directly improving their ability to effectively communicate complex quantitative and technical knowledge to an audience with multiple and diverse learning needs. In the first year of this project, fellows have been paired with high school science teachers from NCCoVoTech. These pairs, along with the principal investigators (PIs) of this program have formed a learning community that is taking this opportunity to examine and to reflect on current issues in science education while specifically addressing critical needs in teaching science in vocational technical high schools. By participating in summer workshops and follow-up meetings facilitated by the PIs, the fellows have been introduced to a number of innovative teaching strategies including problem-based learning (PBL). Fellow/teacher pairs have begun to develop and teach PBL activities that are in agreement with State of Delaware science standards and that support student learning through inquiry. Fellows also have the opportunity to engage in coteaching with their teacher partner. In this "teaching at the elbow of another", fellows will gain a better understanding of and appreciation for the complexities and nuances of teaching science in vocational technical high schools. While not taught as a stand-alone course in NCCoVoTech high schools, earth science topics are integrated into the science curriculum at

Technical Degrees and Higher Vocational Education

ERIC Educational Resources Information Center

Hordern, Jim

2017-01-01

This paper focuses on the proposals for the introduction of "technical degrees" in English higher education institutions advanced by the Labour Party's Liam Byrne in a document entitled "Robbins Rebooted" which was published in August 2014 by the Social Market Foundation. The context and rationale for the proposed technical…

Educating Homeless Students: Promising Practices.

ERIC Educational Resources Information Center

Stronge, James H., Ed.; Reed-Victor, Evelyn, Ed.

This book is for educators who serve homeless students or students temporarily sharing houses with other families. It describes many promising strategies for working with these students. The chapters are: (1) "Educating Homeless Children and Youth: An Introduction" (James H. Stronge); (2) "Meeting the Developmental and Educational Needs of…

Technical Skills Training for Veterinary Students: A Comparison of Simulators and Video for Teaching Standardized Cardiac Dissection.

PubMed

Allavena, Rachel E; Schaffer-White, Andrea B; Long, Hanna; Alawneh, John I

The goal of the study was to evaluate alternative student-centered approaches that could replace autopsy sessions and live demonstration and to explore refinements in assessment procedures for standardized cardiac dissection. Simulators and videos were identified as feasible, economical, student-centered teaching methods for technical skills training in medical contexts, and a direct comparison was undertaken. A low-fidelity anatomically correct simulator approximately the size of a horse's heart with embedded dissection pathways was constructed and used with a series of laminated photographs of standardized cardiac dissection. A video of a standardized cardiac dissection of a normal horse's heart was recorded and presented with audio commentary. Students were allowed to nominate a preference for learning method, and students who indicated no preference were randomly allocated to keep group numbers even. Objective performance data from an objective structure assessment criterion and student perception data on confidence and competency from surveys showed both innovations were similarly effective. Evaluator reflections as well as usage logs to track patterns of student use were both recorded. A strong selection preference was identified for kinesthetic learners choosing the simulator and visual learners choosing the video. Students in the video cohort were better at articulating the reasons for dissection procedures and sequence due to the audio commentary, and student satisfaction was higher with the video. The major conclusion of this study was that both methods are effective tools for technical skills training, but consideration should be given to the preferred learning style of adult learners to maximize educational outcomes.

The Effect of Classic and Web Based Educational Application, Applied for Turbo Pascal Lesson, on Student Success Level

ERIC Educational Resources Information Center

Bintas, Jale; Barut, Asim

2008-01-01

The aim of research is to compare difference between tenth class students and determine their level of success about classic and web based educational applications of Turbo Pascal lesson. This research was applied to 10 A and 10 TLB students of Izmir Karsikaya Anatolian Technical and industrial high school computer department in second term of…

78 FR 13030 - Applications for New Awards; Native American Career and Technical Education Program (NACTEP)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... DEPARTMENT OF EDUCATION Applications for New Awards; Native American Career and Technical...: Notice. Overview Information: Native American Career and Technical Education Program (NACTEP). Notice... Purpose of Program: The Native American Career and Technical Education Program (NACTEP) provides grants to...

Harnessing Facebook for Student Engagement in Accounting Education: Guiding Principles for Accounting Students and Educators

ERIC Educational Resources Information Center

Stone, Gerard; Fiedler, Brenton Andrew; Kandunias, Chris

2014-01-01

This paper proposes principles to guide accounting students' and accounting educators' use of Facebook as an educational resource to engage students with their learning. A body of cross-disciplinary research has investigated potential applications of Facebook to invigorate student engagement. Generic guidelines for educators who are contemplating…

Adlai E. Stevenson High School, Bilingual Academic and Technical Education for Youth Program. O.E.E. Evaluation Report, 1982-1983.

ERIC Educational Resources Information Center

Keyes, Jose Luis; Collins, Carla

The Bilingual Academic and Technical Education for Youth (BATEY) Program completed its third and final year of funding at Adlai E. Stevenson High School, Bronx, New York. In 1982-83, the program offered bilingual instruction and support services to approximately 300 Hispanic students of limited English proficiency in grades 9-12. Although the…

Student-to-Student Interaction in Distance Education Classes: What Do Graduate Students Want?

ERIC Educational Resources Information Center

Moore, Gary E.; Warner, Wendy J.; Jones, David W. W.

2016-01-01

This research sought to determine if graduate students taking distance education classes desire student-to-student interaction. Over 200 graduate students who completed one or more distance education graduate classes in agricultural and extension education from North Carolina State University during the past three years were surveyed. While some…

Soft Skills: The New Curriculum for Hard-Core Technical Professionals

ERIC Educational Resources Information Center

Bancino, Randy; Zevalkink, Claire

2007-01-01

In this article, the authors talk about the importance of soft skills for hard-core technical professionals. In many technical professions, the complete focus of education and training is on technical topics either directly or indirectly related to a career or discipline. Students are generally required to master various mathematics skills,…

Seeding the Edge of Career and Technical Education

ERIC Educational Resources Information Center

Mojkowski, Charles; Washor, Elliot

2007-01-01

There is a resurging interest in career and technical education (CTE) from business leaders, policymakers and educators who have discovered, and in some cases rediscovered, the benefits of authentic applied learning embedded in career pathways that combine a robust mixture of relationships, relevance and rigor. Despite the growing interest, many…

A Technical/Strategic Paradigm for Online Executive Education

ERIC Educational Resources Information Center

Smith, Marlene A.; Keaveney, Susan M.

2017-01-01

This article discusses the development and delivery of online courses for the executive education audience. The goal is to introduce a new framework, the technical/strategic paradigm, that will help educators to identify the pedagogical needs of disparate executive groups and adjust their online course development plans accordingly. We describe…

Student Incivility in Radiography Education.

PubMed

Clark, Kevin R

2017-07-01

To examine student incivility in radiography classrooms by exploring the prevalence of uncivil behaviors along with the classroom management strategies educators use to manage and prevent classroom disruptions. A survey was designed to collect data on the severity and frequency of uncivil student behaviors, classroom management strategies used to address minor and major behavioral issues, and techniques to prevent student incivility. The participants were educators in radiography programs accredited by the Joint Review Committee on Education in Radiologic Technology. Findings indicated that severe uncivil student behaviors in radiography classrooms do not occur as often as behaviors classified as less severe. Radiography educators in this study used a variety of strategies and techniques to manage and prevent student incivility; however, radiography educators who received formal training in classroom management reported fewer incidents of student incivility than those who had not received formal training. The participants in this study took a proactive approach to addressing severe behavioral issues in the classroom. Many radiography educators transition from the clinical environment to the classroom setting with little to no formal training in classroom management. Radiography educators are encouraged to attend formal training sessions to learn how to manage the higher education classroom effectively. Student incivility is present in radiography classrooms. This study provides a foundation for future research on incivility. ©2017 American Society of Radiologic Technologists.

Measuring Student Satisfaction from the Student Outcomes Survey. Technical Paper

ERIC Educational Resources Information Center

Fieger, Peter

2012-01-01

The Student Outcomes Survey is an annual national survey of vocational education and training (VET) students. Since 1995, participants have been asked to rate their satisfaction with different aspects of their training, grouped under three main themes: teaching, assessment, and generic skills and learning experiences. While the composition of the…

Kentucky Career and Technical Teacher Education Programs/Ongoing Issues

ERIC Educational Resources Information Center

Workman, Ed; Stubbs, Joyce

2012-01-01

What is Career and Technical Education (CTE)? How does one identify and recognized strong CTE educational programs? And after one has answers to the first two questions, how does one successfully align CTE teacher education (CTTE) programs across large institutions such as colleges within universities, or in Kentucky's endeavor within universities…

Engineering and Industrial Fields. Revised Summary Report: Technical Employment in Northeast Florida.

ERIC Educational Resources Information Center

Baker, William E.; And Others

The document is one of five summary reports, all part of a Pre-Technical Curriculum Planning Project for secondary students who aspire to technical employment or post secondary technical education. This report represents the results of an assessment of the northeast Florida area's technical occupations in engineering and industrial fields. A…

Agriculture and Related Businesses. Revised Summary Report: Technical Employment in Northeast Florida.

ERIC Educational Resources Information Center

Baker, William E.; And Others

The document is one of five summary reports, all part of a Pre-Technical Curriculum Planning Project for secondary students who aspire to technical employment or post secondary technical education. This report represents the results of an assessment of the northeast Florida area's technical occupations in agriculture and related businesses. A…

Project Based Learning experiences in the space engineering education at Technical University of Madrid

NASA Astrophysics Data System (ADS)

Rodríguez, Jacobo; Laverón-Simavilla, Ana; del Cura, Juan M.; Ezquerro, José M.; Lapuerta, Victoria; Cordero-Gracia, Marta

2015-10-01

This work describes the innovation activities performed in the field of space education since the academic year 2009/10 at the Technical University of Madrid (UPM), in collaboration with the Spanish User Support and Operations Center (E-USOC), the center assigned by the European Space Agency (ESA) in Spain to support the operations of scientific experiments on board the International Space Station. These activities have been integrated within the last year of the UPM Aerospace Engineering degree. A laboratory has been created, where students have to validate and integrate the subsystems of a microsatellite using demonstrator satellites. In parallel, the students participate in a Project Based Learning (PBL) training process in which they work in groups to develop the conceptual design of a space mission. One student in each group takes the role of project manager, another one is responsible for the mission design and the rest are each responsible for the design of one of the satellite subsystems. A ground station has also been set up with the help of students developing their final thesis, which will allow future students to perform training sessions and learn how to communicate with satellites, how to receive telemetry and how to process the data. Several surveys have been conducted along two academic years to evaluate the impact of these techniques in engineering learning. The surveys evaluate the acquisition of specific and generic competences, as well as the students' degree of satisfaction with respect to the use of these learning methodologies. The results of the surveys and the perception of the lecturers show that PBL encourages students' motivation and improves their results. They not only acquire better technical training, but also improve their transversal skills. It is also pointed out that this methodology requires more dedication from lecturers than traditional methods.

Technical and Vocational Education Transformation in Malaysia: Shaping the Future Leaders

ERIC Educational Resources Information Center

Sauffie, Nur Fatin Binti Mohd

2015-01-01

In accordance with the concept of lifelong education, the Technical and Vocational Education (TVE) system is one flaw of that is recognized or known as a system whose role is to develop individuals with high technical skills as desired by the industry nowadays. Changing times and technology development at this time require changes to the TVET…

Professional, Technical and Kindred Workers: Where They Come From, Where They Go In The Commonwealth of Pennsylvania. Information For Student Career Planning.

ERIC Educational Resources Information Center

Driscoll, Jeanne Baker; Herr, Edwin L.

Intended for use in occupational and education planning by students and counselors, this document contains information about the 106 occupations which are included in the professional, technical, and kindred workers cluster of the U.S. census. The occupations are grouped by field of interest. For each occupation, the information provided includes…

"We Don't Just Make Cookies": Practitioners' Perspectives on the Viability of Career and Technical Education in the United States

ERIC Educational Resources Information Center

Fletcher, Edward C., Jr.; Lasonen, Johanna L.; Hernandez, Victor M.

2014-01-01

The purpose of this qualitative study was to capture the perspectives of 13 Masters' students, who are also practitioners in Career and Technical Education (CTE), regarding the trends, issues, and future directions in the field. The analysis of interview and focus group data led to the identification of three recurring themes. The first theme was…

Comparing Students' Enrolment and Graduate Output in Home Economics with Other Vocational Subjects in Colleges of Education in Nigeria

ERIC Educational Resources Information Center

Arubayi, D. O.

2009-01-01

The purpose of this study was to compare students' enrolment and graduate output in Home Economics with other Vocational subjects in the Colleges of Education in Nigeria. The target population included twenty (20) Federal Colleges and twenty-seven (27) State Colleges of Education offering eight Vocational and Technical disciplines during the…

Degrees of systematic thoroughness: A text analysis of student technical science writing

NASA Astrophysics Data System (ADS)

Esch, Catherine Julia

This dissertation investigates student technical science writing and use of evidence. Student writers attended a writing-intensive undergraduate university oceanography course where they were required to write a technical paper drawing from an instructor-designed software program, Our Dynamic Planet. This software includes multiple interactive geological data sets relevant to plate tectonics. Through qualitative text analysis of students science writing, two research questions frame the study asking: How are the papers textually structured? Are there distinctions between high- and low-rated papers? General and specific text characteristics within three critical sections of the technical paper are identified and analyzed (Observations, Interpretations, Conclusions). Specific text characteristics consist of typical types of figures displayed in the papers, and typical statements within each paper section. Data gathering consisted of collecting 15 student papers which constitute the population of study. An analytical method was designed to manage and analyze the text characteristics. It has three stages: identifying coding categories, re-formulating the categories, and configuring categories. Three important elements emerged that identified notable distinctions in paper quality: data display and use, narration of complex geological feature relationships, and overall organization of text structure. An inter-rater coding concordance check was conducted, and showed high concordance ratios for the coding of each section: Observations = 0.95; Interpretations = 0.93; and Conclusions = 0.87. These categories collectively reveal a larger pattern of general differences in the paper quality levels (high, low, medium). This variation in the quality of papers demonstrates degrees of systematic thoroughness, which is defined as how systematically each student engages in the tasks of the assignment, and how thoroughly and consistently the student follows through on that systematic

State Leadership for Career Technical Education.

ERIC Educational Resources Information Center

Kister, Joanna

This document is comprised of two main parts: (1) Role and Nature of State Leadership; and (2) Developing Leaders. Issues related to state leadership for career and technical education (CTE) were studied. CTE-related research, policy, and practice were reviewed. State directors of CTE were surveyed, and 39 individuals considered opinion leaders in…

3D printing in social education: Eki-Fab and student PBL

NASA Astrophysics Data System (ADS)

Makino, Masato; Saito, Azusa; Kodama, Mai; Takamatsu, Kyuuichiro; Tamate, Hideaki; Sakai, Kazuyuki; Wada, Masato; Khosla, Ajit; Kawakami, Masaru; Furukawa, Hidemitsu

2017-04-01

Additive manufacturing or 3D printer is one of the most innovative material processing methods. We are considering that human resources for 3D printing would be needed in the future. To educate the abilities of the digital fabrication, we have the public digital fabrication space "Eki-Fab" for junior and high school students and Project Based Learning (PBL) class for undergraduate students. Eki-Fab is held on every Saturday at the Yonezawa train station. In the "Eki-Fab", anybody can study the utilizing of 3D printer and modeling technics under the instruction of staff in Yamagata University. In the PBL class, we have the class every Thursday. The students get the techniques of the digital fabrication through the PBL.

NASA's Student Glovebox: An Inquiry-Based Technology Educator's Guide

NASA Technical Reports Server (NTRS)

Rosenberg, Carla B.; Rogers, Melissa J. B.

2000-01-01

A glovebox is a sealed container with built-in gloves. Astronauts perform small experiments and test hardware inside of them. Gloveboxes have flown on NASA's space shuttles and on the Russian space station Mir. The International Space Station (ISS) will have a permanent glovebox on the U.S. laboratory, Destiny. This document contains cursory technical information on gloveboxes and glovebox experiments and is intended for use by middle school educators and students. Information is provided on constructing a model glovebox as well as realistic cut-outs to be pasted on the model.

Does teaching non-technical skills to medical students improve those skills and simulated patient outcome?

PubMed

Hagemann, Vera; Herbstreit, Frank; Kehren, Clemens; Chittamadathil, Jilson; Wolfertz, Sandra; Dirkmann, Daniel; Kluge, Annette; Peters, Jürgen

2017-03-29

The purpose of this study is to evaluate the effects of a tailor-made, non-technical skills seminar on medical student's behaviour, attitudes, and performance during simulated patient treatment. Seventy-seven students were randomized to either a non-technical skills seminar (NTS group, n=43) or a medical seminar (control group, n=34). The human patient simulation was used as an evaluation tool. Before the seminars, all students performed the same simulated emergency scenario to provide baseline measurements. After the seminars, all students were exposed to a second scenario, and behavioural markers for evaluating their non-technical skills were rated. Furthermore, teamwork-relevant attitudes were measured before and after the scenarios, and perceived stress was measured following each simulation. All simulations were also evaluated for various medical endpoints. Non-technical skills concerning situation awareness (p<.01, r=0.5) and teamwork (p<.01, r=0.45) improved from simulation I to II in the NTS group. Decision making improved in both groups (NTS: p<.01, r=0.39; control: p<.01, r=0.46). The attitude 'handling errors' improved significantly in the NTS group (p<.05, r=0.34). Perceived stress decreased from simulation I to II in both groups. Medical endpoints and patients´ outcome did not differ significantly between the groups in simulation II. This study highlights the effectiveness of a single brief seminar on non-technical skills to improve student's non-technical skills. In a next step, to improve student's handling of emergencies and patient outcomes, non-technical skills seminars should be accompanied by exercises and more broadly embedded in the medical school curriculum.

Pursuit of stem enrollment in high school and higher education for Latino and Caucasian students with disabilities

NASA Astrophysics Data System (ADS)

White, Laurel Ann

This study examined course enrollments for female and male Latino and Caucasian students with disabilities (SWD) in Science, Technology, Engineering, and Math (STEM) to establish baseline data in one region of the state of Washington. The study analyzed five academic years of STEM course enrollment in one high school Career and Technical Education (CTE) program and one comprehensive community college. The study uncovered the following findings: (a) Latino and Caucasian SWD STEM enrollment percentages were not significantly different in the high school CTE program, but were significantly different in the STEM program in the comprehensive community college; (b) more females enrolled in Science and males in Engineering than anticipated, (c) Mathematics had the smallest enrollment pattern by ethnicity and gender in both settings, and (d) more males than females enrolled in Technology courses in the comprehensive community college. This research suggests the use of universal design of learning, theory of mind, and the ecological learning theory to encourage STEM enrollment for students with disabilities. Keywords: Career and Technical Education (CTE), Caucasian, comprehensive community college, disability, enrollment, female, high school, Latino, male, STEM, student enrollment, and students with disabilities.

Influence of parental education on Honduran medical students' labour perspectives: rural work and emigration.

PubMed

Zambrano, Lysien I; Pereyra-Elías, Reneé; Reyes-García, Selvin Z; Fuentes, Itzel; Mayta-Tristán, Percy

2015-01-01

We sought to evaluate the intentions of Honduran medical students to emigrate or to work in a rural setting, and their association with parental education. We performed a cross-sectional, analytic study at a Honduran medical school. Student participants completed a structured questionnaire, which assessed their intentions to emigrate or work in a rural setting after finishing medical school and the highest level of education achieved by their parents. We calculated crude and adjusted prevalence ratios with their respective 95% confidence intervals. Of 868 surveys distributed, 564 were completed. The mean age of the participants was 21 (standard deviation 3) years, and 62.2% were female. Of the respondents, 16.6% intended to emigrate to work and 11.2% intended to work in a rural setting. Higher paternal education (i.e., technical, university and postgraduate training) was associated with a higher rate of intention to emigrate. Students whose fathers underwent postgraduate education were less likely to intend to work in a rural setting. For maternal education, only the postgraduate level was associated with the outcomes in some of the tested models. The frequency of students intending to emigrate was relatively low. However, the frequency of students being willing to work in rural settings was also low. Students whose parents had higher levels of education were more likely to intend to work abroad and less likely to intend to work in a rural area. These factors should be considered in medical schools' selection processes to improve retention and ensure adequate distribution of physicians.

STRATEGIES FOR OPTIMIZING THE APPLICATION OF MEDIA TO VOCATIONAL AND TECHNICAL EDUCATION CURRICULA.

ERIC Educational Resources Information Center

CHRISTENSEN, VIRGIL E.; TAYLOR, ROBERT E.

THE ASSUMPTION IS MADE THAT VOCATIONAL AND TECHNICAL EDUCATION IS "UNDEVELOPED" IN TERMS OF ADEQUATELY EXPLOITING THE FULL RANGE OF POSSIBILITIES INHERENT IN MODERN EDUCATIONAL MEDIA AND TECHNOLOGY. THIS PAPER PRESENTS AN OVERVIEW OF THE BROAD SETTING IN WHICH VOCATIONAL AND TECHNICAL EDUCATION FUNCTIONS, THE GENERAL BENEFITS OF APPLICATIONS OF…

Investigating Employability: A Study to Ascertain Whether Attaining Stackable Credentials Increases Opportunity for Employment for Career Technical Graduates

ERIC Educational Resources Information Center

Whittington, Amy Green

2017-01-01

Career technical education plays an important part in the mission of community colleges--providing educational opportunities needed by members of their communities. Career technical programs prepare students for entry into the workforce. Accountability standards for career technical programs, from local, state, and federal bodies, monitor…

The Secondarization of Technical Education in Argentina and the Professionalization of Secondary Education in Brazil in a Comparative Perspective.

ERIC Educational Resources Information Center

Gallart, Maria Antonia

The evolution of technical education in Argentina has not been so much a process of vocationalization of academic education as a process of secondarization of vocational education. Argentine technical schools are the product of a process of convergence among terminal trade schools, vocational schools, and industrial technological schools that has…

Adlai E. Stevenson High School Bilingual Academic and Technical Education for Youth Program (BATEY). O.E.E. Evaluation Report, 1981-1982.

ERIC Educational Resources Information Center

Bulkin, Elly; And Others

The Bilingual Academic and Technical Education for Youth Program (BATEY) provides English as a second language (ESL) and bilingual instruction with a vocational focus to foreign born (98 percent of them Hispanic) students at Adlai E. Stevenson High School, Bronx, New York. Under the program, Title VII funds support administrative and support…

The Significance of Social Relationships in Learning to Become a Vocational and Technical Education Teacher: A Case Study of Three Individuals

ERIC Educational Resources Information Center

Goh, Adeline Yuen Sze

2013-01-01

This article about workplace learning examines the learning of individuals in becoming a Vocational and Technical Education (VTE) teacher in Brunei. Drawing on research findings from a group of student teachers, it presents case study accounts of three individuals to illustrate the importance of social relationships in learning to become a VTE…

National Profiles in Technical and Vocational Education in Asia and the Pacific: Japan.

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

One of a series of studies on the development of technical and vocational education in the member states of UNESCO, this report profiles the educational system in Japan. The three parts of the document provide information about the geography and history of Japan, historical and current perspectives of general education, and technical and…

The Education Chief Resident in Medical Student Education: Indicators of Success

ERIC Educational Resources Information Center

Roman, Brenda; Khavari, Andrew; Hart, David

2010-01-01

Objective: Although residents are actively involved in teaching medical students, some students do not feel that they get adequate teaching from residents. The position of Education Chief Resident in Medical Student Education was developed to enhance the educational experience for the students, cultivate the academic skills of the education chief,…

New Wine in New Bottles: Transforming Vocational Education into Career and Technical Education. Practice Application Brief No. 21.

ERIC Educational Resources Information Center

Brown, Bettina Lankard

Teachers responsible for transforming their vocational education programs into career and technical education (CTE) programs need to concentrate on ensuring programs' technical and academic rigor, engaging in collaboration in school and in the community, keeping current through professional development experiences, and extending learning beyond…

Student-Organized College of Education "Educational Research Exchanges" from the Student and Former Student Perspective.

ERIC Educational Resources Information Center

Henson, Robin K.; Guthrie, Abbie

2001-01-01

Discusses how some colleges of education (COEs) attempt to develop academic climate and facilitate graduate student research activity, addressing the role of student-organized internal research conferences in the transformation of student to social scientist and explicating the benefits of these internal conferences to students, faculty, and COEs.…

An Evaluation of the Science Education Component of the Cross River State Science and Technical Education Project

ERIC Educational Resources Information Center

Ekuri, Emmanuel Etta

2012-01-01

The Cross River State Science and Technical Education Project was introduced in 1992 by edict number 9 of 20 December 1991, "Cross River State Science and Technical Education Board Edit, 20 December, 1991", with the aim of improving the quality of science teaching and learning in the state. As the success of the project depends…

The Student-Centered Classroom Made Real: Transforming Student Presentations in an Advanced Course on Technical German

ERIC Educational Resources Information Center

Rarick, Damon O.

2010-01-01

This article describes how the author has successfully combined polling with more traditional instructional strategies to enhance student presentation skills in an advanced course teaching technical German. By helping students select and prepare topics, anticipate questions and engage the audience, instructors can eliminate some of the root causes…

Technical Education Outreach in Materials Science and Technology Based on NASA's Materials Research

NASA Technical Reports Server (NTRS)

Jacobs, James A.

2003-01-01

The grant NAG-1 -2125, Technical Education Outreach in Materials Science and Technology, based on NASA s Materials Research, involves collaborative effort among the National Aeronautics and Space Administration s Langley Research Center (NASA-LaRC), Norfolk State University (NSU), national research centers, private industry, technical societies, colleges and universities. The collaboration aims to strengthen math, science and technology education by providing outreach related to materials science and technology (MST). The goal of the project is to transfer new developments from LaRC s Center for Excellence for Structures and Materials and other NASA materials research into technical education across the nation to provide educational outreach and strengthen technical education. To achieve this goal we are employing two main strategies: 1) development of the gateway website and 2) using the National Educators Workshop: Update in Engineering Materials, Science and Technology (NEW:Updates). We have also participated in a number of national projects, presented talks at technical meetings and published articles aimed at improving k-12 technical education. Through the three years of this project the NSU team developed the successful MST-Online site and continued to upgrade and update it as our limited resources permitted. Three annual NEW:Updates conducted from 2000 though 2002 overcame the challenges presented first by the September 11,2001 terrorist attacks and the slow U.S. economy and still managed to conduct very effective workshops and expand our outreach efforts. Plans began on NEW:Update 2003 to be hosted by NASA Langley as a part of the celebration of the Centennial of Controlled Flight.

Technical Reports (Part I). End of Project Report, 1968-1971, Volume III.

ERIC Educational Resources Information Center

Western Nevada Regional Education Center, Lovelock.

The pamphlets included in this volume are technical reports prepared as outgrowths of the Student Information Systems of the Western Nevada Regional Education Center (WN-REC) funded by a Title III (Elementary and Secondary Education Act) grant. These reports describe methods of interpreting the printouts from the Student Information System;…

Emphasis: Technical Education. Conference Report (St. Louis, Mo., May 12-14, 1966).

ERIC Educational Resources Information Center

American Association of Junior Colleges, Washington, DC.

The purpose of this conference was to bring expertise in the field of technical education to bear upon the identification and resolution of problems inhibiting the expansion of programs at the junior college level. Sixty-four participants were involved. The conference focused upon the relationships of technical education to: society, college…

North Carolina Agricultural and Technical State University Drug Education Policy.

ERIC Educational Resources Information Center

Welborne, Sullivan; And Others

This drug education policy statement for North Carolina Agricultural and Technical State University establishes two educational objectives: to develop an educational program that increases the university community's knowledge and competency regarding controlled substances and to increase the skills required to take corrective action for potential…

Educating Nursing Students with Disabilities: Replacing Essential Functions with Technical Standards for Program Entry Criteria

ERIC Educational Resources Information Center

Matt, Susan B.; Maheady, Donna; Fleming, Susan E.

2015-01-01

Across the globe, students with disabilities have been increasing in prevalence in higher education settings. In the twenty-first century the struggle to include individuals with disabilities into nursing schools and workplaces continues in different parts of the world. Historically, entry criteria in nursing schools have been based on essential…

Dedicated education unit: student perspectives.

PubMed

Nishioka, Vicki M; Coe, Michael T; Hanita, Makoto; Moscato, Susan R

2014-01-01

The study compared students' perceptions of their clinical learning experiences in a dedicated education unit (DEU) with their experiences in traditional clinical education. Unlike traditional academic-instructor models, expert nurses in the DEU provide clinical education to students with faculty support. This repeated measures design used student surveys, supplemented by focus group data. Students were more likely to agree that their clinical learning experience was high quality and they had a consistent mentoring relationship during DEU rotations. Students also reported the quality of the unit's learning environment, the leadership style of the nurse manager, and the nursing care on the unit was more favorable in DEUs than traditional units. Consistent with their changed role in DEUs, faculty members were less active in helping students integrate theory and practice. These findings provide additional evidence of the value that the DEU model contributes to high-quality clinical education.

National Profiles in Technical and Vocational Education in Asia and the Pacific: Philippines.

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

One of a series of studies on the development of technical and vocational education in the member states of UNESCO, this report profiles the educational system in the Philippines. The two parts of the document provide an overview and milestones in technical and vocational education (through charts and tables). Some of the highlights are as…

National Profiles in Technical and Vocational Education in Asia and the Pacific: Nepal.

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

One of a series of studies on the development of technical and vocational education in the member states of UNESCO, this report profiles the educational system in Nepal. The four parts of the document provide general information about the following: the country; the history, goals, and structure of the educational system; vocational technical and…

DEVELOPMENTS IN TECHNICAL AND VOCATIONAL EDUCATION.

ERIC Educational Resources Information Center

HARRIS, NORMAN C.

THE JUNIOR COLLEGE HAS EMERGED AS THE APPROPRIATE TRAINING AGENCY FOR STUDENTS ENTERING MIDDLE MANPOWER JOBS REQUIRING A BALANCE OF COGNITIVE AND MANUAL ABILITY. THESE ARE THE STUDENTS WITH MIDDLE LEVEL ABILITIES AND ACCOMPLISHMENTS, FOR WHOM HIGH SCHOOL EDUCATION IS NOT ENOUGH AND A 4-YEAR DEGREE NOT NECESSARY. PROBLEMS ENCOUNTERED IN TRAINING…

[Virtual surgical education: experience with medicine and surgery students].

PubMed

Bonavina, Luigi; Mozzi, Enrico; Peracchia, Alberto

2003-01-01

The use of virtual reality simulation is currently being proposed within programs of postgraduate surgical education. The simple tasks that make up an operative procedure can be repeatedly performed until satisfactory execution is achieved, and the errors can be corrected by means of objective assessment. The aim of this study was to evaluate the applicability and the results of structured practice with the LapSim laparoscopic simulator used by undergraduate medical students. A significant reduction in operative time and errors was noted in several tasks (navigation, clipping, etc.). Although the transfer of technical skills to the operating room environment remains to be demonstrated, our research shows that this type of teaching is applicable to undergraduate medical students and in future may become a useful tool for selecting individuals for surgical residency programs.

Today's Adult Students

ERIC Educational Resources Information Center

Reese, Susan

2012-01-01

Who are the adult students in career and technical education (CTE) today? There is not one simple answer to that question. Some are young with little life experience, while others are returning to the workforce and learning new skills to reinvent themselves. Whatever the case, educating adult students is an integral part of ACTE's mission, and the…

Stafford Technical Center: Designing a Future for Architects and Builders

ERIC Educational Resources Information Center

Lucci, William, Jr.

2005-01-01

In this article, the author describes Stafford Technical Center's Engineering Technology Academy (ETA), in which students pursue a variety of educational and career options for anything connected to construction technologies--including drafting and design, architecture, and even work in historic preservation. In addition to technical skills,…

Performance of two different digital evaluation systems used for assessing pre-clinical dental students' prosthodontic technical skills.

PubMed

Gratton, D G; Kwon, S R; Blanchette, D R; Aquilino, S A

2017-11-01

Proper integration of newly emerging digital assessment tools is a central issue in dental education in an effort to provide more accurate and objective feedback to students. The study examined how the outcomes of students' tooth preparation were correlated when evaluated using traditional faculty assessment and two types of digital assessment approaches. Specifically, incorporation of the Romexis Compare 2.0 (Compare) and Sirona prepCheck 1.1 (prepCheck) systems was evaluated. Additionally, satisfaction of students based on the type of software was evaluated through a survey. Students in a second-year pre-clinical prosthodontics course were allocated to either Compare (n = 42) or prepCheck (n = 37) systems. All students received conventional instruction and used their assigned digital system as an additional evaluation tool to aid in assessing their work. Examinations assessed crown preparations of the maxillary right central incisor (#8) and the mandibular left first molar (#19). All submissions were graded by faculty, Compare and prepCheck. Technical scores did not differ between student groups for any of the assessment approaches. Compare and prepCheck had modest, statistically significant correlations with faculty scores with a minimum correlation of 0.3944 (P = 0.0011) and strong, statistically significant correlations with each other with a minimum correlation of 0.8203 (P < 0.0001). A post-course student survey found that 55.26% of the students felt unfavourably about learning the digital evaluation protocols. A total of 62.31% felt favourably about the integration of these digital tools into the curriculum. Comparison of Compare and prepCheck showed no evidence of significant difference in students' prosthodontics technical performance and perception. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The Effect of Trades and Industry, a Career and Technical Education Curriculum, on Student Achievement: A Propensity Study

ERIC Educational Resources Information Center

Siegrist, Michael Scott

2012-01-01

This study examined whether students who participated in the trades and industry curriculum did better than their counterparts on standardized tests. Data from the National Assessment of Educational Progress (NAEP) High School Transcript Study (HSTS) were used. A nationally represented sample of over 37,000 public and private school students were…

Technical Education in Agriculture at the Post Secondary Level

ERIC Educational Resources Information Center

Leamer, Thomas C.

1978-01-01

A college dean discusses two-year postsecondary agriculture technology programs and the need for properly trained faculty to train students for semiskilled, skilled, and technical positions both on and off the farm. (MF)

Students' Perception of Daylight Illumination in the School Workshop as a Determinant for Effective Students' Task Performance in Workshop Practice

ERIC Educational Resources Information Center

Amasuomo, Japo Oweikeye Morto; Alio, Abigail Ngozi

2013-01-01

The study investigated daylight illumination in the school workshop as a determinant for effective students' task performance in workshop practice. 183 NCE Technical students in 300 Level which comprised of 73 and 112 students from Federal Colleges of Education (Technical), Asaba and Omoku, Nigeria respectively during the 2008/2009 academic…

Proceedings of the International Symposium on Technical and Vocational Education (Beijing, China, September 13-18, 1993).

ERIC Educational Resources Information Center

Chinese National Commission for UNESCO (China).

This document contains 28 papers: "Technical and Vocational Education in Asia and the Pacific: Regional Overview and Recent Innovations" (Muhammad Ashraf Qureshi); "Secondary Education in Austria" (Helmut Aigner); "The Development of Technical Curricula in Austria" (Helmut Aigner); "Technical and Vocational Education in Australia. Australian…

The Multidimensional Nature of Relationships: The Perceptions of Iranian Nursing Students and Educators of the Student-Educator Relationship.

PubMed

Heydari, Abbas; Yaghoubinia, Fariba; Roudsari, Robab Latifnejad

2016-03-01

The student-educator relationship in nursing is very important to the success of teaching and learning. The perceptions of students and educators of this relationship affect its success. Therefore, it is necessary to better understand this relationship. The purpose of the current study was to explore Iranian nursing students' and educators' perceptions of student-educator relationship in clinical nursing education. In this conventional content analysis study, eight Bachelor of Nursing students and 10 clinical nursing educators from nursing and midwifery school in Mashhad (Iran) participated. Purposive sampling was used to select participants. Data were gathered using semistructured interviews. To analyze data, a conventional content analysis approach was used to identify meaning units and their condensation and to make codes and create categories : Results showed that the multidimensional nature of the student-educator relationship in clinical nursing education consists of (a) dimensions related to the educator, (b) dimensions related to the student, and (c) dimensions of relationship quality. Each of these categories is composed of codes that showed the perception of participants about the nature of relationship. On the basis of the unique features and attributes regarding relationship perceptions in clinical nursing education identified among the participants of this study, students and educators in Iran should pay greater attention to establishing the relationship as it relates to these attributes.

Enhancing Intercultural Competence of Engineering Students via GVT (Global Virtual Teams)-Based Virtual Exchanges: An International Collaborative Course in Intralogistics Education

ERIC Educational Resources Information Center

Wang, Rui; Rechl, Friederike; Bigontina, Sonja; Fang, Dianjun; Günthner, Willibald A.; Fottner, Johannes

2017-01-01

In order to enhance the intercultural competence of engineering students, an international collaborative course in intralogistics education was initiated and realized between the Technical University of Munich in Germany and the Tongji University in China. In this course, students worked in global virtual teams (GVTs) and solved a concrete case…

2015-2016 Florida Adult Education Assessment Technical Assistance Paper

ERIC Educational Resources Information Center

Florida Department of Education, 2016

2016-01-01

This technical assistance paper provides guidance to individuals with test administration responsibilities in adult education programs. These policies apply to the approved assessments that programs may use to report educational gains in compliance with the National Reporting System (NRS) requirements. The NRS is the accountability system for the…

2016-2017 Florida Adult Education Assessment Technical Assistance Paper

ERIC Educational Resources Information Center

Florida Department of Education, 2017

2017-01-01

This technical assistance paper provides guidance to individuals with test administration responsibilities in adult education programs. These policies apply to the approved assessments that programs may use to report educational gains in compliance with the National Reporting System (NRS) requirements. The NRS is the accountability system for the…

Literature research of the Nutrition Improvement Programme for Rural Compulsory Education Students in China.

PubMed

Zhang, Fan; Hu, Xiaoqi; Tian, Zuyin; Zhang, Qian; Ma, Guansheng

2015-04-01

To describe the Nutrition Improvement Programme for Rural Compulsory Education Students (NIPRCES) in China and to share the experiences of developing and implementing nationwide school meal programmes with other countries. The article is based on a literature review of technical documents and reports of NIPRCES and relevant national legislation, technical reports and studies on school nutrition, minutes of meetings and national conferences, and official documents of the National Office of Student Nutrition and the Chinese Center for Disease Control and Prevention. People's Republic of China. Published papers, national policies, legislation and unpublished official documents. A total of 23 million rural compulsory education students were covered by NIPRCES. In the development and implementation process of NIPRCES, fifteen ministries and national committees were involved and an efficient collaborative mechanism was established. All NIPRCES-covered schools were required to serve meals on a daily basis. By the end of June 2012, the proportions of students choosing 'school feeding', 'food package' and 'family feeding' modes were respectively 64.0 %, 32.0 % and 4.0 %. The central government subsidized school meals annually by more than $US 2.5 billion and invested $US 4.8 billion on school kitchens to support this programme. The NIPRCES is a significant movement of governmental nutritional intervention in China. Food safety, financial security, decentralization and other potential concerns should be considered and lessons can be learned from other countries. Further relevant research and a nationwide monitoring and evaluation programme are needed.

Predicting Influential Factors of Secondary Career and Technical Education Teachers' Intent to Stay in the Profession

ERIC Educational Resources Information Center

Dainty, Julie D.

2012-01-01

Retaining highly qualified career and technical education teachers is important in maintaining and growing quality secondary career and technical education programs. Therefore, the purpose of this study was to identify factors contributing to teacher retention specifically in the area of career and technical education (CTE) and determine…

Helping Doctoral Students Establish Long-Term Identities as Technical Communication Scholars

ERIC Educational Resources Information Center

Grant-Davie, Keith; Matheson, Breeanne; Stephens, Eric James

2017-01-01

This article aims to help doctoral students in technical communication prepare themselves for the academic job market and for the subsequent process of earning tenure and promotion in increasingly demanding environments. The authors propose that students do four things: (a) learn to spot and articulate research problems; (b) find their…

New Jersey Technical Assistance Project (N.J. TAP): "Educational Resources and Support Services on Behalf of Children with Multiple Sensory Impairment." Final Report.

ERIC Educational Resources Information Center

New Jersey State Dept. of Education, Trenton.

This final report describes activities and accomplishments of the New Jersey Technical Assistance Project, a project to improve educational resources and support services for students with multiple sensory impairment (deaf-blindness). Activities and accomplishments are presented in a tabular format for each project goal and objective. The project…

A Report by the Governor's Task Force on Vocational and Technical Education.

ERIC Educational Resources Information Center

Governor's Task Force on Vocational and Technical Education, Columbus, OH.

On July 19, 1968, a Task Force on Vocational and Technical Education was created by the governor of Ohio to develop proposals for organization, financing, and legislation. Some major problems to which the Task Force gave attention were: (1) the serious gap between the need for and the availability of vocational and technical education, (2) the…

Nutrition Students Enhance School Health Education

ERIC Educational Resources Information Center

Cotugna, Nancy; Vickery, Connie E.

2005-01-01

Purpose: The purpose of the Nutrition Education Students and Teachers (NEST) project was to develop a model of collaboration between University of Delaware dietetics students and elementary teachers to promote nutrition education in the classroom. Design/methodology/approach: Junior and senior level students in a nutrition education course…

Quiet or Questioning? Students' Discussion Behaviors in Student-Centered Education across Cultures

ERIC Educational Resources Information Center

Frambach, Janneke M.; Driessen, Erik W.; Beh, Philip; van der Vleuten, Cees P. M.

2014-01-01

A tool used in student-centered education is discussion among students in small learning groups. The Western origin of student-centered education, coupled with cross-cultural differences in communication styles, may detract from its cross-cultural applicability. This study investigates how in student-centered education, students' cultural…

Failing Intercultural Education? "Thoughtfulness" in Intercultural Education for Student Teachers

ERIC Educational Resources Information Center

Lanas, Maija

2014-01-01

This paper proposes a rethinking of intercultural education in teacher education, arguing that discussion of the intercultural education of student teachers tends to have the following two gaps: "one," such discussion tends to overlook student teacher education as a context for teaching intercultural education, and "two," it…

Southern Africa: A Study of the Educational Systems of Botswana, Lesotho, South Africa, Southwest Africa/Namibia and Swaziland with an Addendum on Zimbabwe-Rhodesia: A Guide to the Academic Placement of Students in Educational Institutions of the United States.

ERIC Educational Resources Information Center

Cranmer, David J.; Woolston, Valerie A.

The educational systems of Southern African countries are described, and guidelines concerning the placement of students who wish to study in U.S. institutions are provided. Information is provided on educational levels (primary, secondary, and higher education); and types of programs (technical/vocational education, teacher training, and…

Re-Conceptualizing Student Success in Higher Education: Reflections from Graduate Student Affairs Educators Using Anti-Deficit Achievement Framework

ERIC Educational Resources Information Center

Pérez, David, II.; Ashlee, Kyle C.; Do, Virginia H.; Karikari, Shamika N.; Sim, Colby

2017-01-01

Fostering student success in higher education requires a paradigm shift. Instead of "fixing" students, efforts must center on preparing college educators. In this study, journal entries from a graduate-level course were used to explore how exposing Graduate Student Affairs Educators to anti-deficit perspectives on student success…

Foreign-Educated Graduate Nursing Students and Plagiarism.

PubMed

Knowlton, Mary; Collins, Shawn Bryant

2017-04-01

Plagiarism is a concern related to students educated in countries other than the United States, where English is not the first language spoken. The authors' experience with plagiarism by a foreign-educated nursing student prompted an investigation into this topic. This article focuses on the occurrence of unintentional plagiarism, a common focus with foreign-educated students, addressing linguistic, as well as cultural, viewpoints. The findings from the literature on plagiarism among foreign-educated students are elicited and the article discusses strategies to help foreign-educated students learn about plagiarism and how to properly cite and reference sources. A variety of proactive strategies exist that can be used by both faculty and students to mitigate the occurrence of plagiarism by foreign-educated nursing students in higher education, starting with a clearer understanding of some of the antecedents to the problem of plagiarism. [J Nurs Educ. 2017;56(4):211-214.]. Copyright 2017, SLACK Incorporated.

Online Career and Technical Education in the Community College

ERIC Educational Resources Information Center

Garza Mitchell, Regina L.

2017-01-01

Very little empirical research has been conducted about online career and technical education (CTE). Despite the continuing enrollment growth in online education (Lokken, 2016) and the national emphasis on CTE as a means of boosting the economy (D'Amico, Morgan, Katsinas, & Friedel, 2014), relatively little is understood about the scope and…

Students' perspectives on basic nursing care education.

PubMed

Huisman-de Waal, Getty; Feo, Rebecca; Vermeulen, Hester; Heinen, Maud

2018-02-05

The aim of the study is to explore the perspectives of nursing students on their education concerning basic nursing care, learned either during theoretical education or clinical placement, with a specific focus on nutrition and communication. Basic care activities lie at the core of nursing, but are ill-informed by evidence and often poorly delivered. Nursing students' education on basic care might be lacking, and the question remains how they learn to deliver basic care in clinical practice. Descriptive study, using an online questionnaire. Nursing students at the vocational and bachelor level of six nursing schools in the Netherlands were invited to complete an online questionnaire regarding their perception of basic nursing care education in general (both theoretical education and clinical placement), and specifically in relation to nutrition and communication. Nursing students (n=226 bachelor students, n=30 vocational students) completed the questionnaire. Most students reported that they learned more about basic nursing care during clinical placement than during theoretical education. Vocational students also reported learning more about basic nursing care in both theoretical education and clinical practice than bachelor students. In terms of nutrition, low numbers of students from both education levels reported learning about nutrition protocols and guidelines during theoretical education. In terms of communication, vocational students indicated that they learned more about different aspects of communication during clinical practice than theoretical education, and were also more likely to learn about communication (in both theoretical education and clinical practice) than were bachelor students. Basic nursing care seems to be largely invisible in nursing education, especially at the bachelor level and during theoretical education. Improved basic nursing care will enhance nurse sensitive outcomes and patient satisfaction and will contribute to lower healthcare