ERCMExpress. Volume 2, Issue 1

ERIC Educational Resources Information Center

US Department of Education, 2006

2006-01-01

This issue of the Emergency Response and Crisis Management (ERCM) Technical Assistance Center's "ERCMExpress" focuses on integrating students with special needs and disabilities into emergency response and crisis management planning. Meeting the needs of students with disabilities and special needs in the event of an emergency does not have to be…

Technical Leadership Development Program

DTIC Science & Technology

2010-12-13

the traditional tenets of leadership and management , systems thinking, understanding SOS issues, and thinking and acting holistically. Our research...international element 2.0 Enterprise Leadership and Management UNCLASSIFIED Contract Number: H98230-08-D-0171 DO 002. TO002, RT 004 Report No...mechanisms for leadership of the overall technical effort, for systems engineering, for requirements, management , and for systems integration. o Develop

Solar energy/utility interface - The technical issues

NASA Astrophysics Data System (ADS)

Tabors, R. D.; White, D. C.

1982-01-01

The technical and economic factors affecting an interface between solar/wind power sources and utilities are examined. Photovoltaic, solar thermal, and wind powered systems are subject to stochastic local climatic variations and as such may require full back-up services from utilities, which are then in a position of having reserve generating power and power lines and equipment which are used only part time. The low reliability which has degraded some economies of scale formerly associated with large, centralized power plants, and the lowered rate of the increase in electricity usage is taken to commend the inclusion of power sources with a modular nature such as is available from solar derived electrical generation. Technical issues for maintaining the quality of grid power and also effectively metering purchased and supplied back-up power as part of a homeostatic system of energy control are discussed. It is concluded that economic considerations, rather than technical issues, bear the most difficulty in integrating solar technologies into the utility network.

The Engineer and the Societal Dilemma: An Interdisciplinary Approach.

ERIC Educational Resources Information Center

Coleman, Robert J.

The University of North Carolina's Electrical Engineering Department developed and delivered a course for undergraduate engineering students. The course integrated technical, social, and ethical perspectives on problems and issues faced in the world of practicing engineers. It achieved this integration by making use of professors in engineering,…

Advancing Commercialization of Algal Biofuel through Increased Biomass Productivity and Technical Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anton, David

The proposed project built on the foundation of over several years years of intensive and ground-breaking R&D work at Cellana's Kona Demonstration Facility (KDF). Phycological and engineering solutions were provided to tackle key cultivation issues and technical barriers limiting algal biomass productivity identified through work conducted outdoors at industrial (1 acre) scale. The objectives of this project were to significantly improve algal biomass productivity and reduce operational cost in a seawater-based system, using results obtained from two top-performing algal strains as the baseline while technically advancing and more importantly, integrating the various unit operations involved in algal biomass production, processing,more » and refining.« less

Inclusive E-Learning - Towards an Integrated System Design.

PubMed

Patzer, Yasmin; Pinkwart, Niels

2017-01-01

At first sight there seem to be issues combining technical accessibility guidelines and educational needs when designing inclusive E-Learning. Furthermore Universal Design for Learning seems to contradict individualization. In this paper we address both issues with an inclusive E-Learning design for the LAYA system, which targets disabled and non-disabled learners.

Technohubs in Teacher Education: The Lived Experience of Assisting Peers with Instructional Technology Issues

ERIC Educational Resources Information Center

Rook, Michael Montalto

2014-01-01

This study examined prospective teachers' lived experiences of assisting peers with instructional technology issues. The study built upon one of ISTE's (2003) essential conditions for integrating technology in education: technical assistance for using technology. Through a review of relevant literature, an argument was made for the study based on…

Multimedia and Some of Its Technical Issues.

ERIC Educational Resources Information Center

Wang, Shousan

2000-01-01

Discusses multimedia and its use in classroom teaching. Describes integrated services digital networks (ISDN); video-on-demand, that uses streaming technology via the Internet; and computer-assisted instruction. (Contains 19 references.) (LRW)

Integrating Occupational Health and Safety into TAFE Courses: Curriculum Topics.

ERIC Educational Resources Information Center

Hall, Bob; Mageean, Pauline

This guide is designed to help technical and further education (TAFE) curriculum writers in Australia integrate safety education into vocational education courses. It provides a general overview of occupational health and safety from the perspective of TAFE trade training and a brief summary of the major health and safety issues that might be…

Automated Management Of Documents

NASA Technical Reports Server (NTRS)

Boy, Guy

1995-01-01

Report presents main technical issues involved in computer-integrated documentation. Problems associated with automation of management and maintenance of documents analyzed from perspectives of artificial intelligence and human factors. Technologies that may prove useful in computer-integrated documentation reviewed: these include conventional approaches to indexing and retrieval of information, use of hypertext, and knowledge-based artificial-intelligence systems.

Human Systems Integration in Practice: Constellation Lessons Learned

NASA Technical Reports Server (NTRS)

Zumbado, Jennifer Rochlis

2012-01-01

NASA's Constellation program provided a unique testbed for Human Systems Integration (HSI) as a fundamental element of the Systems Engineering process. Constellation was the first major program to have HSI mandated by NASA's Human Rating document. Proper HSI is critical to the success of any project that relies on humans to function as operators, maintainers, or controllers of a system. HSI improves mission, system and human performance, significantly reduces lifecycle costs, lowers risk and minimizes re-design. Successful HSI begins with sufficient project schedule dedicated to the generation of human systems requirements, but is by no means solely a requirements management process. A top-down systems engineering process that recognizes throughout the organization, human factors as a technical discipline equal to traditional engineering disciplines with authority for the overall system. This partners with a bottoms-up mechanism for human-centered design and technical issue resolution. The Constellation Human Systems Integration Group (HSIG) was a part of the Systems Engineering and Integration (SE&I) organization within the program office, and existed alongside similar groups such as Flight Performance, Environments & Constraints, and Integrated Loads, Structures and Mechanisms. While the HSIG successfully managed, via influence leadership, a down-and-in Community of Practice to facilitate technical integration and issue resolution, it lacked parallel top-down authority to drive integrated design. This presentation will discuss how HSI was applied to Constellation, the lessons learned and best practices it revealed, and recommendations to future NASA program and project managers. This presentation will discuss how Human Systems Integration (HSI) was applied to NASA's Constellation program, the lessons learned and best practices it revealed, and recommendations to future NASA program and project managers on how to accomplish this critical function.

Integrating telehealth in to 'business as usual': Is it really possible?

PubMed

Jury, Susan C; Kornberg, Andrew J

2016-12-01

The Royal Children's Hospital, Melbourne, began offering web-based telehealth video consultation in 2011, with the principle being that telehealth should be integrated into 'business as usual'. In telehealth literature, key differences between telehealth and in-person consultations can make this hard to achieve, so an audit was performed that revealed many small gaps in the process.A total of 125 telehealth appointments were booked during the study period. Of these, 13% (n = 16) were rescheduled, cancelled or changed to face-to-face appointments, and up to two main issues were identified for the remaining appointments. Some 69% of the remaining 108 appointments (n = 75) were completed successfully, with 23% (n = 25) completely seamless end to end. Overall, 39 issues were administrative (40%), 34 technical (35%) and 24 scheduling (25%); nine (8%) required some minor troubleshooting.For long-term sustainability, integrating telehealth into business as usual needs to remain the target. Scheduling and technical glitches were the main barriers to seamless telehealth. Several issues have now been addressed with the introduction of an electronic medical record, and the development of standardised processes and staff training. © The Author(s) 2016.

Bridging the Divide between Safety and Risk Management for your Project or Program

NASA Technical Reports Server (NTRS)

Lutomski, Mike

2005-01-01

This presentation will bridge the divide between these separate but overlapping disciplines and help explain how to use Risk Management as an effective management decision support tool that includes safety. Risk Management is an over arching communication tool used by management to prioritize and effectively mitigate potential problems before they concur. Risk Management encompasses every kind of potential problem that can occur on a program or project. Some of these are safety issues such as hazards that have a specific likelihood and consequence that need to be controlled and included to show an integrated picture of accepted) mitigated, and residual risk. Integrating safety and other assurance disciplines is paramount to accurately representing a program s or projects risk posture. Risk is made up of several components such as technical) cost, schedule, or supportability. Safety should also be a consideration for every risk. The safety component can also have an impact on the technical, cost, and schedule aspect of a given risk. The current formats used for communication of safety and risk issues are not consistent or integrated. The presentation will explore the history of these disciplines, current work to integrate them, and suggestions for integration for the future.

Issues of Structure and Issues of Scale in Assessment from a Situative/Sociocultural Perspective. CSE Technical Report 668

ERIC Educational Resources Information Center

Mislevy, Robert J.

2006-01-01

A situated/sociocultural (SC) view of assessment "emphasizes questions about the quality of students' participation in activities of inquiry and sense-making, and considers assessment practices as integral components of the general systems of activity in which they occur" (Greeno, Collins, & Resnick, 1997, p. 36). This presentation addresses two…

Technical and Practical Issues in the Structure and Clinical Invariance of the Wechsler Scales: A Rejoinder to Commentaries

ERIC Educational Resources Information Center

Weiss, Lawrence G.; Keith, Timothy Z.; Zhu, Jianjun; Chen, Hsinyi

2013-01-01

This discussion article addresses issues related to expansion of the Wechsler model from four to five factors; multiple broad CHC abilities measured by the Arithmetic subtest; advantages and disadvantages of including complex tasks requiring integration of multiple broad abilities when measuring intelligence; limitations of factor analysis, which…

Integrating Cross-Cultural Interaction through Video-Communication and Virtual Worlds in Foreign Language Teaching Programs: Burden or Added Value?

ERIC Educational Resources Information Center

Jauregi, Kristi; de Graaff, Rick; Canto, Silvia

2011-01-01

Organizing and implementing telecollaboration projects in foreign language curricula is not an easy endeavour (Belz & Thorne, 2006; Guth & Helm, 2010), as pedagogical, organizational and technical issues have to be addressed before cross-cultural interaction sessions can be carried out (O'Dowd & Ritter, 2006). These issues make many teaching…

[White House Conference on Aging, 1981. Abstracts of the Technical Committee Reports, Mini White House Conference Reports, and State White House Conference Reports.

ERIC Educational Resources Information Center

Cowell, Daniel D.

This collection of abstracts, designed to assist White House Conference on Aging delegates involved with research on aging, presents information from 16 Technical Committee Reports which focus on implications of an age-integrated society, employment, support systems, health issues and services, the family, long-term care, older Americans as a…

Systems Engineering and Integration for Advanced Life Support System and HST

NASA Technical Reports Server (NTRS)

Kamarani, Ali K.

2005-01-01

Systems engineering (SE) discipline has revolutionized the way engineers and managers think about solving issues related to design of complex systems: With continued development of state-of-the-art technologies, systems are becoming more complex and therefore, a systematic approach is essential to control and manage their integrated design and development. This complexity is driven from integration issues. In this case, subsystems must interact with one another in order to achieve integration objectives, and also achieve the overall system's required performance. Systems engineering process addresses these issues at multiple levels. It is a technology and management process dedicated to controlling all aspects of system life cycle to assure integration at all levels. The Advanced Integration Matrix (AIM) project serves as the systems engineering and integration function for the Human Support Technology (HST) program. AIM provides means for integrated test facilities and personnel for performance trade studies, analyses, integrated models, test results, and validated requirements of the integration of HST. The goal of AIM is to address systems-level integration issues for exploration missions. It will use an incremental systems integration approach to yield technologies, baselines for further development, and possible breakthrough concepts in the areas of technological and organizational interfaces, total information flow, system wide controls, technical synergism, mission operations protocols and procedures, and human-machine interfaces.

An acceptable role for computers in the aircraft design process

NASA Technical Reports Server (NTRS)

Gregory, T. J.; Roberts, L.

1980-01-01

Some of the reasons why the computerization trend is not wholly accepted are explored for two typical cases: computer use in the technical specialties and computer use in aircraft synthesis. The factors that limit acceptance are traced in part, to the large resources needed to understand the details of computer programs, the inability to include measured data as input to many of the theoretical programs, and the presentation of final results without supporting intermediate answers. Other factors are due solely to technical issues such as limited detail in aircraft synthesis and major simplifying assumptions in the technical specialties. These factors and others can be influenced by the technical specialist and aircraft designer. Some of these factors may become less significant as the computerization process evolves, but some issues, such as understanding large integrated systems, may remain issues in the future. Suggestions for improved acceptance include publishing computer programs so that they may be reviewed, edited, and read. Other mechanisms include extensive modularization of programs and ways to include measured information as part of the input to theoretical approaches.

Integrating Blended and Problem-Based Learning into an Architectural Housing Design Studio: A Case Study

ERIC Educational Resources Information Center

Bregger, Yasemin Alkiser

2017-01-01

This paper presents how a blended learning pedagogic model is integrated into an architectural design studio by adapting the problem-based learning process and housing issues in Istanbul Technical University (ITU), during fall 2015 and spring 2016 semesters for fourth and sixth level students. These studios collaborated with the "Introduction…

Integrating Cross-Cultural Interaction through Video-Communication and Virtual Worlds in Foreign Language Teaching Programs: Is There an Added Value?

ERIC Educational Resources Information Center

Canto, Silvia; Jauregi, Kristi; van den Bergh, Huub

2013-01-01

Organizing and implementing telecollaboration projects in foreign language curricula is not an easy endeavour (Belz & Thorne, 2006; Guth & Helm, 2010), as pedagogical, organizational and technical issues have to be addressed before cross-cultural interaction sessions can be carried out (O'Dowd & Ritter, 2006; O'Dowd, 2011). These issues make many…

XXIV International Conference on Integrable Systems and Quantum symmetries (ISQS-24)

NASA Astrophysics Data System (ADS)

Burdík, Čestmír; Navrátil, Ondřej; Posta, Severin

2017-01-01

The XXIV International Conference on Integrable Systems and Quantum Symmetries (ISQS-24), organized by the Department of Mathematics, Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University Prague and the Bogoliubov Laboratory of Theoretical Physics of the Joint Institute for Nuclear Research, belongs to the successful series of conferences held at the Czech Technical University which began in 1992 and is devoted to problems of mathematical physics related to the theory of integrable systems, quantum groups and quantum symmetries. During the last 5 years, each of the conferences gathered around 110 scientists from all over the world. 43 papers of plenary lectures and contributions presented at ISQS-24 are published in the present issue of Journal of Physics: Conference Series.

Planning as an Iterative Process

NASA Technical Reports Server (NTRS)

Smith, David E.

2012-01-01

Activity planning for missions such as the Mars Exploration Rover mission presents many technical challenges, including oversubscription, consideration of time, concurrency, resources, preferences, and uncertainty. These challenges have all been addressed by the research community to varying degrees, but significant technical hurdles still remain. In addition, the integration of these capabilities into a single planning engine remains largely unaddressed. However, I argue that there is a deeper set of issues that needs to be considered namely the integration of planning into an iterative process that begins before the goals, objectives, and preferences are fully defined. This introduces a number of technical challenges for planning, including the ability to more naturally specify and utilize constraints on the planning process, the ability to generate multiple qualitatively different plans, and the ability to provide deep explanation of plans.

Integration of photovoltaic units into electric utility grids: experiment information requirements and selected issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-09-01

A number of investigations, including those conducted by The Aerospace Corporation and other contractors, have led to the recognition of technical, economic, and institutional issues relating to the interface between solar electric technologies and electric utility systems. These issues derive from three attributes of solar electric power concepts, including (1) the variability and unpredictability of the solar resources, (2) the dispersed nature of those resources which suggests the feasible deployment of small dispersed power units, and (3) a high initial capital cost coupled with relatively low operating costs. It is imperative that these integration issues be pursued in parallel withmore » the development of each technology if the nation's electric utility systems are to effectively utilize these technologies in the near to intermediate term. Analyses of three of these issues are presented: utility information requirements, generation mix and production cost impacts, and rate structures in the context of photovoltaic units integrated into the utility system. (WHK)« less

Water Processor and Oxygen Generation Assembly

NASA Technical Reports Server (NTRS)

Bedard, John

1997-01-01

This report documents the results of the tasks which initiated efforts on design issues relating to the Water Processor (WP) and the Oxygen Generation Assembly (OGA) Flight Hardware for the International Space Station. This report fulfills the Statement of Work deliverables requirement for contract H-29387D. The following lists the tasks required by contract H-29387D: (1) HSSSI shall coordinate a detailed review of WP/OGA Flight Hardware program requirements with personnel from MSFC to identify requirements that can be eliminated without affecting the technical integrity of the WP/OGA Hardware; (2) HSSSI shall conduct the technical interchanges with personnel from MSFC to resolve design issues related to WP/OGA Flight Hardware; (3) HSSSI will initiate discussions with Zellwegger Analytics, Inc. to address design issues related to WP and PCWQM interfaces.

ACE: A distributed system to manage large data archives

NASA Technical Reports Server (NTRS)

Daily, Mike I.; Allen, Frank W.

1993-01-01

Competitive pressures in the oil and gas industry are requiring a much tighter integration of technical data into E and P business processes. The development of new systems to accommodate this business need must comprehend the significant numbers of large, complex data objects which the industry generates. The life cycle of the data objects is a four phase progression from data acquisition, to data processing, through data interpretation, and ending finally with data archival. In order to implement a cost effect system which provides an efficient conversion from data to information and allows effective use of this information, an organization must consider the technical data management requirements in all four phases. A set of technical issues which may differ in each phase must be addressed to insure an overall successful development strategy. The technical issues include standardized data formats and media for data acquisition, data management during processing, plus networks, applications software, and GUI's for interpretation of the processed data. Mass storage hardware and software is required to provide cost effective storage and retrieval during the latter three stages as well as long term archival. Mobil Oil Corporation's Exploration and Producing Technical Center (MEPTEC) has addressed the technical and cost issues of designing, building, and implementing an Advanced Computing Environment (ACE) to support the petroleum E and P function, which is critical to the corporation's continued success. Mobile views ACE as a cost effective solution which can give Mobile a competitive edge as well as a viable technical solution.

UAS Integration into the NAS Project

NASA Technical Reports Server (NTRS)

Bauer, Jeff

2010-01-01

The goal of the UAS Integration in the NAS Project is to contribute capabilities that reduce technical barriers related to the safety and operational challenges associated with enabling routine UAS access to the NAS This goal will be accomplished through a two-phased approach of system-level integration of key concepts, technologies and/or procedures, and demonstrations of integrated capabilities in an operationally relevant environment. Technical objectives include: PHASE 1: a) Validating the key technical areas identified by this project. System-level analyses, a State of the Art Analysis (SOAA), and a ConOps will identify the challenges and barriers preventing routine UAS access to the NAS. b) Developing a national roadmap and gap analysis identifying specific deliverables in the area of operations, procedures, and technologies that will impact future policy decisions. PHASE 2: a) Provide regulators with a methodology for developing airworthiness requirements for UAS and data to support development of certifications standards and regulatory guidance. b) Provide systems-level integrated testing of concepts and/or capabilities that address barriers to routine access to the NAS. Through simulation and flight testing, address issues including separation assurance, communications requirements, and Pilot Aircraft Interfaces (PAIs) in operationally relevant environments

How Change Occurred at the Stoughton Area School District: Lessons from a SWIFT (Schoolwide Integrated Framework for Transformation) Knowledge Development Site. Issue Brief #3

ERIC Educational Resources Information Center

Stonemeier, Jennifer; Trader, Barbara; Kingston, Mary; Richards, Curtis; Blank, Rolf; East, Bill

2014-01-01

The SWIFT Center (Schoolwide Integrated Framework for Transformation) is an initiative to bring about educational equity district by district until all students excel, including students with the most profound needs. As the national technical assistance center to build schoolwide inclusive practices to improve academic and behavioral outcomes for…

Unattended sensors community of interest: expanding intelligence awareness, optimizing mission support

NASA Astrophysics Data System (ADS)

Helt, Paul J.; DuBois, Dennis

2012-06-01

The scope and success of Department of Defense (DoD), Intelligence Community (IC), and other United States Government (USG) Unattended Sensor efforts clearly requires a focused, expanded effort at integration and best practices development. Discussions with key stakeholders indicate strong support for the standup of an Unattended Sensors Community of Interest (USCOI) to improve visibility across programs and foster greater mission partnerships. The USCOI will advance understanding of legal and privacy issues, data sharing, Intelligence Surveillance and Reconnaissance (ISR) architecture integration standards, technical specifications, and other issues of common interest (power management, concealment, etc.); promoting opportunities for cost avoidance and improved effectiveness. Launching the USCOI concept provides a stakeholders' forum to identify, discuss, and facilitate Doctrine, Organization, Training, Material, Leadership, Personnel and Facilities (DOTMLPF) resolutions to issues related to the acquisition, development, and employment of unattended sensors across the DoD, IC, and broader USG, as appropriate. USCOI also provides a structured forum where appropriately cleared law enforcement can share operational and technical experiences and expertise on integration of unattended sensor data in existing/planned collection and analysis architectures. The USCOI concept can help facilitate extensive independent discussion across the community and enhance subject matter expert and leadership perspectives. Many senior leaders believe DoD and the IC have a great deal to learn from law enforcement use of unattended sensors and data integration. The USCOI will broaden awareness and open dialogue among users and developers across the interagency, law enforcement, and academia.

Strategic Choices for Data Communications Systems.

ERIC Educational Resources Information Center

Arns, Robert G.; Urban, Patricia A.

1984-01-01

Issues in determining how to develop a data communications system at colleges and universities are discussed including; technical requirements; cost; implications for coordination and (de)centralization of hardware/software; deciding when to create a data network; data security, information integrity, and organizational development. (Author/MLW)

NASA's UAS NAS Access Project

NASA Technical Reports Server (NTRS)

Johnson, Charles W.

2011-01-01

The vision of the Unmanned Aircraft System (UAS) Integration in the National Airspace System (NAS) Project is "A global transportation system which allows routine access for all classes of UAS." The goal of the UAS Integration in the NAS Project is to "contribute capabilities that reduce technical barriers related to the safety and operational challenges associated with enabling routine UAS access to the NAS." This goal will be accomplished through a two-phased approach based on development of system-level integration of key concepts, technologies and/or procedures, and demonstrations of integrated capabilities in an operationally relevant environment. Phase 1 will take place the first two years of the Project and Phase 2 will take place the following three years. The Phase 1 and 2 technical objectives are: Phase 1: Developing a gap analysis between current state of the art and the Next Generation Air Transportation System (NextGen) UAS Concept of Operations . Validating the key technical areas identified by this Project . Conducting initial modeling, simulation, and flight testing activities . Completing Sub-project Phase 1 deliverables (spectrum requirements, comparative analysis of certification methodologies, etc.) and continue Phase 2 preparation (infrastructure, tools, etc.) Phase 2: Providing regulators with a methodology for developing airworthiness requirements for UAS, and data to support development of certifications standards and regulatory guidance . Providing systems-level, integrated testing of concepts and/or capabilities that address barriers to routine access to the NAS. Through simulation and flight testing, address issues including separation assurance, communications requirements, and human systems integration in operationally relevant environments. The UAS in the NAS Project will demonstrate solutions in specific technology areas, which will address operational/safety issues related to UAS access to the NAS. Since the resource allocation for this Project is limited ($150M over the five years), the focus is on reducing the technical barriers where NASA has unique capabilities. As a result, technical areas, such as Sense and Avoid (SAA) and beyond line of sight command and control will not be addressed. While these are critical barriers to UAS access, currently, there is a great deal of global effort being exercised to address these challenge areas. Instead, specific technology development in areas where there is certainty that NASA can advance the research to high technology readiness levels will be the Project's focus. Specific sub-projects include Separation Assurance, Human Systems Integration, Communications, Certification, and Integrated Test and Evaluation. Each sub-project will transfer technologies to relevant key stakeholders and decision makers through research transition teams, technology forums, or through other analogous means.

EXPANDING THE ROLE OF ENVIRONMENTAL IMMUNOASSAYS: TECHNICAL CAPABILITIES REGULATORY ISSUES AND COMMUNICATION VEHICLES

EPA Science Inventory

Large numbers of samples are commonplace in environmental monitoring and human exposure assessment studies. When the goals of the US Environmental Protection Agency (EPA) Office of research and Development (sound methods, integrated with human and ecological health, common sense...

Building Community-Based Consensus: The Oconto Experience.

ERIC Educational Resources Information Center

Behr, Chris; Shaffer, Ron; Lamb, Greg; Miller, Al; Sadowske, Sue

1998-01-01

Coastal communities face difficult choices regarding the use if their waterfront resources. The complexity of issues, contradictory scientific evidence, different visions of the future, and uncertainty regarding community interests add to the difficulty of reaching consensus. The community of Oconto, Wisconsin, attempted to integrate technical and…

Leveraging Independent Management and Chief Engineer Hierarchy: Vertically and Horizontally-Derived Technical Authority Value

NASA Technical Reports Server (NTRS)

Barley, Bryan; Newhouse, Marilyn

2012-01-01

In the development of complex spacecraft missions, project management authority is usually extended hierarchically from NASA's highest agency levels down to the implementing institution's project team level, through both the center and the program. In parallel with management authority, NASA utilizes a complementary, but independent, hierarchy of technical authority (TA) that extends from the agency level to the project, again, through both the center and the program. The chief engineers (CEs) who serve in this technical authority capacity oversee and report on the technical status and ensure sound engineering practices, controls, and management of the projects and programs. At the lowest level, implementing institutions assign project CEs to technically engage projects, lead development teams, and ensure sound technical principles, processes, and issue resolution. At the middle level, programs and centers independently use CEs to ensure the technical success of their projects and programs. At the agency level, NASA's mission directorate CEs maintain technical cognizance over every program and project in their directorate and advise directorate management on the technical, cost, schedule, and programmatic health of each. As part of this vertically-extended CE team, a program level CE manages a continually varying balance between penetration depth and breadth across his or her assigned missions. Teamwork issues and information integration become critical for management at all levels to ensure value-added use of both the synergy available between CEs at the various agency levels, and the independence of the technical authority at each organization.

Special Issue of Solid-State Electronics, dedicated to EUROSOI-ULIS 2016

NASA Astrophysics Data System (ADS)

Sverdlov, Viktor; Selberherr, Siegfried

2017-02-01

The current special issue of Solid-State Electronics includes 29 extended papers presented at the 2016 Second Joint International EUROSOI Workshop and International Conference on Ultimate Integration on Silicon (EUROSOI-ULIS 2016) held in Wien, Austria, on January 25-27, 2016. The papers entering to the special issue have been selected by the EUROSOI-ULIS 2016 Technical Program Committee based on the excellence of abstracts submitted and presentations delivered at the conference. In order to comply with the high standards of Solid-State Electronics the manuscripts went through the standard reviewing procedure.

Practical Literacy Matters: Teacher Confidence Is Key

ERIC Educational Resources Information Center

Santamaria, Laura A.; Taylor, Marissa K.; Park, Travis D.; Keene, Barrett L.; van der Mandele, Elizabeth

2010-01-01

Literacy is important to career and technical education (CTE) teachers, who strive to integrate core academic and cognitive skills and knowledge into their classrooms. There is little question that educators need to continually address literacy within CTE. Rather, the issue for many CTE teachers and administrators becomes how to effectively…

Modeling human-environmental systems

Treesearch

Morgan Grove; Charlie Schweik; Tom Evans; Glen Green

2002-01-01

This chapter focuses on the integration and development of environmental models that include human decision making. While many methodological and technical issues are common to all types of environmental models, our goal is to highlight the unique characteristics that need to be considered when modeling human-environmental dynamics and to identify future directions for...

San Antonio's medical center corridor : lessons learned from the Metropolitan Model Deployment Initiative : reducing delay through integrated freeway and arterial management

DOT National Transportation Integrated Search

1997-04-01

This report presents the results of research on procurement-related legal and non-technical issues which may be constraining the deployment of Intelligent Transportation Systems (ITS). The reports focus is on State and local procurement practices ...

PHOTOCATALYTIC TREATMENT OF AIR EMISSIONS RESULTING FROM GROUND-WATER TREATMENT, "GROUND WATER CURRENTS" EPA/542-N-01-008, ISSUE 42

EPA Science Inventory

A new system for treating off-gas from ground water remediation systems containing chlorinated organic compounds has been demosntrated under USEPA's Superfund Innovative Technical Evaluation (SITE) Program. Results indicate that this technology, known as the adsorption-integrated...

Getting Users to Library Resources: A Delicious Alternative

ERIC Educational Resources Information Center

Kapucu, Aysegul; Hoeppner, Athena; Dunlop, Doug

2008-01-01

The article gives an overview of social bookmarking in libraries and discusses the University of Central Florida (UCF) Libraries Delicious project and its outcomes in depth. It also addresses technical issues involved with setting up a library Delicious account; barriers to participation; training requirements; integration with other library sites…

Training on women and renewable sources of energy.

PubMed

Duenas Loza, M

1997-01-01

The training package developed by the International Research and Training Institute for the Advancement of Women in 1989 focuses on women and energy. The Institute conducts training activities using collected, analyzed and disseminated information and documentation, as well as identification of critical research and training activities and promotion of integrated issues on women and energy policies, programs and projects. Previous training experiences identified the inefficient quality of training offered to community members, technical staff and technical agencies, with more emphasis on the technical skills instead on the managerial, socio-organizational and environmental aspects. The creation of a multimedia modular training material provides an association between the issues of women, New and Renewable Sources of Energy (NRSE) and environmental aspects necessary for the strengthening of national institutions, promotion of socioeconomical and technically feasible renewable technologies, and awareness building, information and communication enhancement. The package covers 1) overview of the UN activities on NRSE; 2) Women's Position in the Energy Sector; 3) NRSE Project and Program design and implementation; 4) relevant NRSE characteristics and technology systems; 5) education and training activities in NRSE projects. This training package is designed to contribute a new approach in the organization and management of NRSE through integration of women's needs and increase awareness and capabilities of planners, officials and experts. In addition, several training seminars were conducted during 1989-91, which focused on the relationship between women and renewable energy sources through the application of participatory and self-reliant techniques.

NASA Lighting Research, Test, & Analysis

NASA Technical Reports Server (NTRS)

Clark, Toni

2015-01-01

The Habitability and Human Factors Branch, at Johnson Space Center, in Houston, TX, provides technical guidance for the development of spaceflight lighting requirements, verification of light system performance, analysis of integrated environmental lighting systems, and research of lighting-related human performance issues. The Habitability & Human Factors Lighting Team maintains two physical facilities that are integrated to provide support. The Lighting Environment Test Facility (LETF) provides a controlled darkroom environment for physical verification of lighting systems with photometric and spetrographic measurement systems. The Graphics Research & Analysis Facility (GRAF) maintains the capability for computer-based analysis of operational lighting environments. The combined capabilities of the Lighting Team at Johnson Space Center have been used for a wide range of lighting-related issues.

NASA's Commercial Communication Technology Program

NASA Technical Reports Server (NTRS)

Bagwell, James W.

1998-01-01

Various issues associated with "NASA's Commercial Communication Technology Program" are presented in viewgraph form. Specific topics include: 1) Coordination/Integration of government program; 2) Achievement of seamless interoperable satellite and terrestrial networks; 3) Establishment of program to enhance Satcom professional and technical workforce; 4) Precompetitive technology development; and 5) Effective utilization of spectrum and orbit assets.

OR2020: The Operating Room of the Future

DTIC Science & Technology

2004-05-01

25 3.3 Technical Requirements: Standards and Tools for Improved Operating R oom Process Integration...Image processing and visualization tools must be made available to the operating room. 5. Communications issues must be addressed and aim toward...protocols for effectively performing advanced surgeries and using telecommunications-ready tools as needed. The following recommendations were made

Challenges in reusing transactional data for daily documentation in neonatal intensive care.

PubMed

Kim, G R; Lawson, E E; Lehmann, C U

2008-11-06

The reuse of transactional data for clinical documentation requires navigation of computational, institutional and adaptive barriers. We describe organizational and technical issues in developing and deploying a daily progress note tool in a tertiary neonatal intensive care unit that reuses and aggregates data from a commercial integrated clinical information system.

Virtual OPACs versus Union Database: Two Models of Union Catalogue Provision.

ERIC Educational Resources Information Center

Cousins, Shirley

1999-01-01

Considers some of the major technical and organizational issues involved in virtual-catalog production, contrasting them with the traditional union catalog approach exemplified by COPAC, an online public-access catalog composed of academic libraries in the United Kingdom. Suggest a method of integrating these two models of the union catalog.…

Increasing the technical level of mining haul trucks

NASA Astrophysics Data System (ADS)

Voronov, Yuri; Voronov, Artyom; Grishin, Sergey; Bujankin, Alexey

2017-11-01

Theoretical and methodological fundamentals of mining haul trucks optimal design are articulated. Methods based on the systems approach to integrated assessment of truck technical level and methods for optimization of truck parameters depending on performance standards are provided. The results of using these methods are given. The developed method allows not only assessing the truck technical levels but also choosing the most promising models and providing quantitative evaluations of the decisions to be made at the design stage. These areas are closely connected with the problem of improvement in the industrial output quality, which, being a part of the widely spread in Western world "total quality control" ideology, is one of the major issues for the Russian economy.

Loran-C performance assurance assessment program

NASA Technical Reports Server (NTRS)

Lilley, Robert W.; Brooks, N. Kent

1992-01-01

The Federal Aviation Administration (FAA) has accepted the Loran-C navigation system as a supplemental navigation aid for enroute use. Extension of Loran-C utilization to instrument approaches requires establishment of a process by which the current level of performance of the system is always known by the pilot. This system 'integrity' translates into confidence that, if the system is made available to the pilot, the guidance will be correct. Early in the consideration of Loran-C for instrument approaches, the Loran-C Planning Work-Group (LPW) was formed with membership from the FAA, the US Coast Guard, various state governments, aviation users, equipment manufacturers and technical experts. The group was hosted and co-chaired by the National Association of State Aviation Officials (NASAO). This forum was ideal for identification of system integrity issues and for finding the correct process for their resolution. Additionally, the Wild Goose Association (WGA), which is the international Loran-C technical and user forum, regularly brings together members of the FAA, Coast Guard, and the scientific community. Papers and discussions from WGA meetings have been helpful. Given here is a collection of the issues in which Ohio University became involved. Issues definition and resolution are included along with the recommendations in those areas where resolution is not yet complete.

Technical-economic modelling of integrated water management: wastewater reuse in a French island.

PubMed

Xu, P; Valette, F; Brissaud, F; Fazio, A; Lazarova, V

2001-01-01

An integrated technical-economic model is used to address water management issues in the French island of Noirmoutier. The model simulates potable water production and supply, potable and non potable water demand and consumption, wastewater collection, treatment and disposal, water storage, transportation and reuse. A variety of water management scenarios is assessed through technical, economic and environmental evaluation. The scenarios include wastewater reclamation and reuse for agricultural and landscape irrigation as well as domestic non potable application, desalination of seawater and brackish groundwater for potable water supply. The study shows that, in Noirmoutier, wastewater reclamation and reuse for crop irrigation is the most cost-effective solution to the lack of water resources and the protection of sensitive environment. Some water management projects which are regarded as having less economic benefit in the short-term may become competitive in the future, as a result of tightened environmental policy, changed public attitudes and advanced water treatment technologies. The model provides an appropriate tool for water resources planning and management.

Quadratic Hadamard Memories II. Adaptive Stochastic Content. Addressable Memory

DTIC Science & Technology

1990-07-01

No. 6429 Issued by Army Missile Command Under Contract # DAAH1-88-C-0887 D T IC Technical Report #2 E LEC SlD Approved for public release...integrate the N coupled nonlinear 0 differential equations, something I cannot do. In the proportional region these equations d 5 can be integrated in spite...is summed, but Uav a is not. Indices are used as follows. i, j, and k denote components in input space. a, b, c, d , and p denote components in the

Marketability requirements for fault detection and diagnostics in commercial buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heinemeier, K.H.

Fault Detection and Diagnostics (FDD) is a technology that has a great potential for improving performance and reducing energy consumed in commercial buildings, and is rapidly becoming feasible for the buildings sector. Scientists have developed algorithms for FDD, and are making plans for field-testing and demonstration of these methods in real buildings. These efforts will provide a sound technical basis for FDD product offerings. FDD has the potential to dramatically improve the quality of operation of buildings. However, progress on technical issues is only one step towards implementing FDD in the market. FDD cannot be expected to have a majormore » impact on buildings unless market issues are addressed. Many questions will have to be answered regarding the users of FDD systems, the usability of the product, the market for FDD, and the nature of possible FDD offerings. It is crucial to consider marketing issues in parallel with the more technical issues. Constraints and opportunities that will be faced in marketing the products must be recognized early in technology development, and addressed and integrated into designs to ensure an appropriate system design. This paper identified a number of key questions that will arise in addressing marketability issues. These questions will have to be answered individually by technology developers and entities intending to market FDD. This paper presents some of the considerations that must go into the answering the questions, and provides a framework for analyzing the market requirements.« less

Malfunction in Hong Kong's Curriculum Policymaking System: A Case Study of Curriculum Integration

ERIC Educational Resources Information Center

Yin, Shirley Yeung Sze; Chung, Lam Chi

2006-01-01

Designing a curriculum is much more than a technical process. Indeed, it could be called a political activity because stakeholders usually attribute different values to, and hold different expectations from, a new curriculum. As early as 1949, Tyler had raised this issue in his classic "Basic Principles of Curriculum and Instruction."…

76 FR 20347 - Release of Draft Integrated Review Plan for the National Ambient Air Quality Standards for Lead

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-12

... you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for... rulemaking by docket number and other identifying information (subject heading, Federal Register date and... phase for the review. This phase began with a science policy workshop to identify issues and questions...

The Add-On Impact of Mobile Applications in Learning Strategies: A Review Study

ERIC Educational Resources Information Center

Jeng, Yu-Lin; Wu, Ting-Ting; Huang, Yueh-Min; Tan, Qing; Yang, Stephen J. H.

2010-01-01

Mobile devices are more powerful and portable nowadays with plenty of useful tools for assisting people to handle daily life. With the advance of mobile technology, the issue of mobile learning has been widely investigated in e-learning research. Many researches consider it is important to integrate pedagogical and technical strengths of mobile…

Establishment of a National Wind Energy Center at University of Houston

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Su Su

The DOE-supported project objectives are to: establish a national wind energy center (NWEC) at University of Houston and conduct research to address critical science and engineering issues for the development of future large MW-scale wind energy production systems, especially offshore wind turbines. The goals of the project are to: (1) establish a sound scientific/technical knowledge base of solutions to critical science and engineering issues for developing future MW-scale large wind energy production systems, (2) develop a state-of-the-art wind rotor blade research facility at the University of Houston, and (3) through multi-disciplinary research, introducing technology innovations on advanced wind-turbine materials, processing/manufacturingmore » technology, design and simulation, testing and reliability assessment methods related to future wind turbine systems for cost-effective production of offshore wind energy. To achieve the goals of the project, the following technical tasks were planned and executed during the period from April 15, 2010 to October 31, 2014 at the University of Houston: (1) Basic research on large offshore wind turbine systems (2) Applied research on innovative wind turbine rotors for large offshore wind energy systems (3) Integration of offshore wind-turbine design, advanced materials and manufacturing technologies (4) Integrity and reliability of large offshore wind turbine blades and scaled model testing (5) Education and training of graduate and undergraduate students and post- doctoral researchers (6) Development of a national offshore wind turbine blade research facility The research program addresses both basic science and engineering of current and future large wind turbine systems, especially offshore wind turbines, for MW-scale power generation. The results of the research advance current understanding of many important scientific issues and provide technical information for solving future large wind turbines with advanced design, composite materials, integrated manufacturing, and structural reliability and integrity. The educational program have trained many graduate and undergraduate students and post-doctoral level researchers to learn critical science and engineering of wind energy production systems through graduate-level courses and research, and participating in various projects in center’s large multi-disciplinary research. These students and researchers are now employed by the wind industry, national labs and universities to support the US and international wind energy industry. The national offshore wind turbine blade research facility developed in the project has been used to support the technical and training tasks planned in the program to accomplish their goals, and it is a national asset which is available for used by domestic and international researchers in the wind energy arena.« less

Optimized multiparametric flow cytometric analysis of circulating endothelial cells and their subpopulations in peripheral blood of patients with solid tumors: a technical analysis.

PubMed

Zhou, Fangbin; Zhou, Yaying; Yang, Ming; Wen, Jinli; Dong, Jun; Tan, Wenyong

2018-01-01

Circulating endothelial cells (CECs) and their subpopulations could be potential novel biomarkers for various malignancies. However, reliable enumerable methods are warranted to further improve their clinical utility. This study aimed to optimize a flow cytometric method (FCM) assay for CECs and subpopulations in peripheral blood for patients with solid cancers. An FCM assay was used to detect and identify CECs. A panel of 60 blood samples, including 44 metastatic cancer patients and 16 healthy controls, were used in this study. Some key issues of CEC enumeration, including sample material and anticoagulant selection, optimal titration of antibodies, lysis/wash procedures of blood sample preparation, conditions of sample storage, sufficient cell events to enhance the signal, fluorescence-minus-one controls instead of isotype controls to reduce background noise, optimal selection of cell surface markers, and evaluating the reproducibility of our method, were integrated and investigated. Wilcoxon and Mann-Whitney U tests were used to determine statistically significant differences. In this validation study, we refined a five-color FCM method to detect CECs and their subpopulations in peripheral blood of patients with solid tumors. Several key technical issues regarding preanalytical elements, FCM data acquisition, and analysis were addressed. Furthermore, we clinically validated the utility of our method. The baseline levels of mature CECs, endothelial progenitor cells, and activated CECs were higher in cancer patients than healthy subjects ( P <0.01). However, there was no significant difference in resting CEC levels between healthy subjects and cancer patients ( P =0.193). We integrated and comprehensively addressed significant technical issues found in previously published assays and validated the reproducibility and sensitivity of our proposed method. Future work is required to explore the potential of our optimized method in clinical oncologic applications.

Modelling plankton ecosystems in the meta-omics era. Are we ready?

PubMed

Stec, Krzysztof Franciszek; Caputi, Luigi; Buttigieg, Pier Luigi; D'Alelio, Domenico; Ibarbalz, Federico Matias; Sullivan, Matthew B; Chaffron, Samuel; Bowler, Chris; Ribera d'Alcalà, Maurizio; Iudicone, Daniele

2017-04-01

Recent progress in applying meta-omics approaches to the study of marine ecosystems potentially allows scientists to study the genetic and functional diversity of plankton at an unprecedented depth and with enhanced precision. However, while a range of persistent technical issues still need to be resolved, a much greater obstacle currently preventing a complete and integrated view of the marine ecosystem is the absence of a clear conceptual framework. Herein, we discuss the knowledge that has thus far been derived from conceptual and statistical modelling of marine plankton ecosystems, and illustrate the potential power of integrated meta-omics approaches in the field. We then propose the use of a semantic framework is necessary to support integrative ecological modelling in the meta-omics era, particularly when having to face the increased interdisciplinarity needed to address global issues related to climate change. Copyright © 2017. Published by Elsevier B.V.

Pilot Test of a New Personal Health System Integrating Environmental and Wearable Sensors for Telemonitoring and Care of Elderly People at Home (SMARTA Project).

PubMed

Pigini, Lucia; Bovi, Gabriele; Panzarino, Claudia; Gower, Valerio; Ferratini, Maurizio; Andreoni, Giuseppe; Sassi, Roberto; Rivolta, Massimo W; Ferrarin, Maurizio

2017-01-01

The increase in life expectancy is accompanied by a growing number of elderly subjects affected by chronic comorbidities, a health issue which also implies important socioeconomic consequences. Shifting from hospital or community dwelling care towards a home personalized healthcare paradigm would promote active aging with a better quality of life, along with a reduction in healthcare-related costs. The aim of the SMARTA project was to develop and test an innovative personal health system integrating standard sensors as well as innovative wearable and environmental sensors to allow home telemonitoring of vital parameters and detection of anomalies in daily activities, thus supporting active aging through remote healthcare. A first phase of the project consisted in the definition of the health and environmental parameters to be monitored (electrocardiography and actigraphy, blood pressure and oxygen saturation, weight, ear temperature, glycemia, home interaction monitoring - water tap, refrigerator, and dishwasher), the feedbacks for the clinicians, and the reminders for the patients. It was followed by a technical feasibility analysis leading to an iterative process of prototype development, sensor integration, and testing. Once the prototype had reached an advanced stage of development, a group of 32 volunteers - including 15 healthy adult subjects, 13 elderly people with cardiac diseases, and 4 clinical operators - was recruited to test the system in a real home setting, in order to evaluate both technical reliability and user perception of the system in terms of effectiveness, usability, acceptance, and attractiveness. The testing in a real home setting showed a good perception of the SMARTA system and its functionalities both by the patients and by the clinicians, who appreciated the user interface and the clinical governance system. The moderate system reliability of 65-70% evidenced some technical issues, mainly related to sensor integration, while the patient's user interface showed excellent reliability (100%). Both elderly people and clinical operators considered the SMARTA system a promising and attractive tool for improving patients' healthcare while reducing related costs and preserving quality of life. However, the moderate reliability of the system should prompt further technical developments in terms of sensor integration and usability of the clinical operator's user interface. © 2017 S. Karger AG, Basel.

Thrust and parry of the SIOP (single integrated operational plan) and sdi (strategic defense initiative). Research report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zank, G.D.

1989-05-01

The relationship between strategic offensive capabilities (reflected in the SIOP) and emerging strategic defensive capabilities (reflected by SDI) is not being adequately addressed. A summary of the existing nuclear war planning process is provided, and an analagous defensive process is postulated. Parallels and differences between the two processes are discussed. Potential areas for information exchange and cooperation are identified to enhance deterrence and improve war fighting potential. Operational, technical and political issues requiring resolution are raised and recommendations to resolve these issues are made.

Integrative laser medicine and high-tech acupuncture at the medical university of graz, austria, europe.

PubMed

Litscher, Gerhard

2012-01-01

At the moment, modernization of acupuncture has a high priority. On the traditional side, acupuncture has only recently been awarded the status of Intangible Cultural Heritage by the UNESCO. On the innovative side, high-tech acupuncture is a registered trademark in Austria. Acupuncture has been used for medical treatment for thousands of years. A large number of empirical data are available but the technical quantification of effects was not possible up to now. Using electroacupuncture, needle, or laser stimulation and modern biomedical techniques, it was possible for the first time to quantify changes in biological activities caused by acupuncture. This paper which serves as introduction for the special issue "High-Tech Acupuncture and Integrative Laser Medicine" of the present journal, focuses on the latest innovative aspects that underline the further enhancement and development of acupuncture. Special emphasis is given to new methodological and technical investigations, for example, results obtained from all kinds of acupuncture innovations (e.g., teleacupuncture) and integrative laser medicine.

Integrative Laser Medicine and High-Tech Acupuncture at the Medical University of Graz, Austria, Europe

PubMed Central

Litscher, Gerhard

2012-01-01

At the moment, modernization of acupuncture has a high priority. On the traditional side, acupuncture has only recently been awarded the status of Intangible Cultural Heritage by the UNESCO. On the innovative side, high-tech acupuncture is a registered trademark in Austria. Acupuncture has been used for medical treatment for thousands of years. A large number of empirical data are available but the technical quantification of effects was not possible up to now. Using electroacupuncture, needle, or laser stimulation and modern biomedical techniques, it was possible for the first time to quantify changes in biological activities caused by acupuncture. This paper which serves as introduction for the special issue “High-Tech Acupuncture and Integrative Laser Medicine” of the present journal, focuses on the latest innovative aspects that underline the further enhancement and development of acupuncture. Special emphasis is given to new methodological and technical investigations, for example, results obtained from all kinds of acupuncture innovations (e.g., teleacupuncture) and integrative laser medicine. PMID:22570669

Composites research at NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Levine, Stanley R.; Duffy, Stephen; Vary, Alex; Nathal, Michael V.; Miner, Robert V.; Arnold, Steven M.; Castelli, Michael G.; Hopkins, Dale A.; Meador, Michael A.

1994-01-01

Composites research at NASA Lewis is focused on their applications in aircraft propulsion, space propulsion, and space power, with the first being predominant. Research on polymer-, metal-, and ceramic-matrix composites is being carried out from an integrated materials and structures viewpoint. This paper outlines some of the topics being pursued from the standpoint of key technical issues, current status, and future directions.

Elements of a Plan-Based Theory of Speech Acts. Technical Report No. 141.

ERIC Educational Resources Information Center

Cohen, Philip R.; Perrault, C. Raymond

This report proposes that people often plan their speech acts to affect their listeners' beliefs, goals, and emotional states and that such language use can be modeled by viewing speech acts as operators in a planning system, allowing both physical and speech acts to be integrated into plans. Methodological issues of how speech acts should be…

Inverter Ground Fault Overvoltage Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoke, Andy; Nelson, Austin; Chakraborty, Sudipta

This report describes testing conducted at NREL to determine the duration and magnitude of transient overvoltages created by several commercial PV inverters during ground fault conditions. For this work, a test plan developed by the Forum on Inverter Grid Integration Issues (FIGII) has been implemented in a custom test setup at NREL. Load rejection overvoltage test results were reported previously in a separate technical report.

How the Administration's "Stronger Together" School Integration Proposal Built on the Lessons Learned from the Flawed TASAP Program. Issue Brief No. 7

ERIC Educational Resources Information Center

McDermott, Kathryn A.; Frankenberg, Erica; DeBray, Elizabeth

2016-01-01

In 2009, Congress allocated $2.5 million for a competitive federal grant program, "Technical Assistance for Student Assignment Plans" (TASAP), that aimed to increase diversity in public schools, but which had only limited success. The Obama Administration's "Stronger Together" 2017 budget proposal (and the accompanying Stronger…

An Integrated Approach to Introducing Biofuels, Flash Point, and Vapor Pressure Concepts into an Introductory College Chemistry Lab

ERIC Educational Resources Information Center

Hoffman, Adam R.; Britton, Stephanie L.; Cadwell, Katie D.; Walz, Kenneth A.

2011-01-01

Students explore the fundamental chemical concepts of vapor pressure and flash point in a real-world technical context, while gaining insight into the contemporary societal issue of biofuels. Lab activities were developed using a closed-cup instrument to measure the flash point of various biodiesel samples. Pre- and post-tests revealed that the…

Work-Based Learning as a Pathway to Postsecondary and Career Success. Insights on Equity and Outcomes. Issue 18

ERIC Educational Resources Information Center

Rodriguez, Jacqueline; Fox, Heather; McCambly, Heather

2016-01-01

Work-based learning (WBL) is a key example of the integration of academic and occupational training that is central to career and technical education (CTE) and through which students have the ability to gain high-wage, high-skilled occupational experience while pursuing postsecondary credentials (Bragg, Dresser, & Smith, 2012; Chernus &…

A Management Model for International Participation in Space Exploration Missions

NASA Technical Reports Server (NTRS)

George, Patrick J.; Pease, Gary M.; Tyburski, Timothy E.

2005-01-01

This paper proposes an engineering management model for NASA's future space exploration missions based on past experiences working with the International Partners of the International Space Station. The authors have over 25 years of combined experience working with the European Space Agency, Japan Aerospace Exploration Agency, Canadian Space Agency, Italian Space Agency, Russian Space Agency, and their respective contractors in the design, manufacturing, verification, and integration of their elements electric power system into the United States on-orbit segment. The perspective presented is one from a specific sub-system integration role and is offered so that the lessons learned from solving issues of technical and cultural nature may be taken into account during the formulation of international partnerships. Descriptions of the types of unique problems encountered relative to interactions between international partnerships are reviewed. Solutions to the problems are offered, taking into consideration the technical implications. Through the process of investigating each solution, the important and significant issues associated with working with international engineers and managers are outlined. Potential solutions are then characterized by proposing a set of specific methodologies to jointly develop spacecraft configurations that benefits all international participants, maximizes mission success and vehicle interoperability while minimizing cost.

Usability and feasibility of a tablet-based Decision-Support and Integrated Record-keeping (DESIRE) tool in the nurse management of hypertension in rural western Kenya.

PubMed

Vedanthan, Rajesh; Blank, Evan; Tuikong, Nelly; Kamano, Jemima; Misoi, Lawrence; Tulienge, Deborah; Hutchinson, Claire; Ascheim, Deborah D; Kimaiyo, Sylvester; Fuster, Valentin; Were, Martin C

2015-03-01

Mobile health (mHealth) applications have recently proliferated, especially in low- and middle-income countries, complementing task-redistribution strategies with clinical decision support. Relatively few studies address usability and feasibility issues that may impact success or failure of implementation, and few have been conducted for non-communicable diseases such as hypertension. To conduct iterative usability and feasibility testing of a tablet-based Decision Support and Integrated Record-keeping (DESIRE) tool, a technology intended to assist rural clinicians taking care of hypertension patients at the community level in a resource-limited setting in western Kenya. Usability testing consisted of "think aloud" exercises and "mock patient encounters" with five nurses, as well as one focus group discussion. Feasibility testing consisted of semi-structured interviews of five nurses and two members of the implementation team, and one focus group discussion with nurses. Content analysis was performed using both deductive codes and significant inductive codes. Critical incidents were identified and ranked according to severity. A cause-of-error analysis was used to develop corresponding design change suggestions. Fifty-seven critical incidents were identified in usability testing, 21 of which were unique. The cause-of-error analysis yielded 23 design change suggestions. Feasibility themes included barriers to implementation along both human and technical axes, facilitators to implementation, provider issues, patient issues and feature requests. This participatory, iterative human-centered design process revealed previously unaddressed usability and feasibility issues affecting the implementation of the DESIRE tool in western Kenya. In addition to well-known technical issues, we highlight the importance of human factors that can impact implementation of mHealth interventions. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Usability and Feasibility of a Tablet-Based Decision-Support and Integrated Record-Keeping (DESIRE) Tool in the Nurse Management of Hypertension in Rural Western Kenya

PubMed Central

Vedanthan, Rajesh; Blank, Evan; Tuikong, Nelly; Kamano, Jemima; Misoi, Lawrence; Tulienge, Deborah; Hutchinson, Claire; Ascheim, Deborah D.; Kimaiyo, Sylvester; Fuster, Valentin; Were, Martin C.

2015-01-01

Background Mobile health (mHealth) applications have recently proliferated, especially in low- and middle-income countries, complementing task-redistribution strategies with clinical decision support. Relatively few studies address usability and feasibility issues that may impact success or failure of implementation, and few have been conducted for non-communicable diseases such as hypertension. Objective To conduct iterative usability and feasibility testing of a tablet-based Decision Support and Integrated Record-keeping (DESIRE) tool, a technology intended to assist rural clinicians taking care of hypertension patients at the community level in a resource-limited setting in western Kenya. Methods Usability testing consisted of “think aloud” exercises and “mock patient encounters” with five nurses, as well as one focus group discussion. Feasibility testing consisted of semi-structured interviews of five nurses and two members of the implementation team, and one focus group discussion with nurses. Content analysis was performed using both deductive codes and significant inductive codes. Critical incidents were identified and ranked according to severity. A cause-of-error analysis was used to develop corresponding design change suggestions. Results Fifty-seven critical incidents were identified in usability testing, 21 of which were unique. The cause-of-error analysis yielded 23 design change suggestions. Feasibility themes included barriers to implementation along both human and technical axes, facilitators to implementation, provider issues, patient issues and feature requests. Conclusions This participatory, iterative human-centered design process revealed previously unaddressed usability and feasibility issues affecting the implementation of the DESIRE tool in western Kenya. In addition to well-known technical issues, we highlight the importance of human factors that can impact implementation of mHealth interventions. PMID:25612791

Distributed photovoltaic systems: Utility interface issues and their present status

NASA Technical Reports Server (NTRS)

Hassan, M.; Klein, J.

1981-01-01

Major technical issues involving the integration of distributed photovoltaics (PV) into electric utility systems are defined and their impacts are described quantitatively. An extensive literature search, interviews, and analysis yielded information about the work in progress and highlighted problem areas in which additional work and research are needed. The findings from the literature search were used to determine whether satisfactory solutions to the problems exist or whether satisfactory approaches to a solution are underway. It was discovered that very few standards, specifications, or guidelines currently exist that will aid industry in integrating PV into the utility system. Specific areas of concern identified are: (1) protection, (2) stability, (3) system unbalance, (4) voltage regulation and reactive power requirements, (5) harmonics, (6) utility operations, (7) safety, (8) metering, and (9) distribution system planning and design.

Unresolved Technical Issues in Fair Interest Measurement.

ERIC Educational Resources Information Center

Cole, Nancy S.

The problem of sex differences in interest measurement involves many technical issues and procedures. The purpose of this paper is to provide a description of the technical problems involved in construction, scoring, and interpretation of interest measures as related to sex differences and to suggest guidelines within these technical issues which…

75 FR 74713 - Reliability Monitoring, Enforcement and Compliance Issues; Notice Allowing Post-Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-01

... Monitoring, Enforcement and Compliance Issues; Notice Allowing Post-Technical Conference Comments November 23... Commission-led technical conference to explore issues associated with reliability monitoring, enforcement and...- 000, on or before December 9, 2010. \\1\\ Reliability Monitoring, Enforcement and Compliance Issues...

Institutional issues affecting the integration and use of remotely sensed data and geographic information systems

USGS Publications Warehouse

Lauer, D.T.; Estes, J.E.; Jensen, J.R.; Greenlee, D.D.

1991-01-01

The developers as well as the users of remotely sensed data and geographic information system (GIS) techniques are associated with nearly all types of institutions in government, industry, and academia. Individuals in these various institutions often find the barriers to accepting remote sensing and GIS are not necessarily technical in nature, but can be attributed to the institutions themselves. Several major institutional issues that affect the technologies of remote sensing and GIS are data availability, data marketing and costs, equipment availability and costs, standards and practices, education and training, and organizational infrastructures. Not only are problems associated with these issues identified, but needs and opportunities also are discussed. -from Authors

CIM's bridge from CADD to CAM: Data management requirements for manufacturing engineering

NASA Technical Reports Server (NTRS)

Ford, S. J.

1984-01-01

Manufacturing engineering represents the crossroads of technical data management in a Computer Integrated Manufacturing (CIM) environment. Process planning, numerical control programming and tool design are the key functions which translate information from as engineered to as assembled. In order to transition data from engineering to manufacturing, it is necessary to introduce a series of product interpretations which contain an interim introduction of technical parameters. The current automation of the product definition and the production process places manufacturing engineering in the center of CAD/CAM with the responsibility of communicating design data to the factory floor via a manufacturing model of the data. A close look at data management requirements for manufacturing engineering is necessary in order to establish the overall specifications for CADD output, CAM input, and CIM integration. The functions and issues associated with the orderly evolution of computer aided engineering and manufacturing are examined.

Technical and economic evaluation of a Brayton-Rankine combined cycle solar-thermal power plant

NASA Astrophysics Data System (ADS)

Wright, J. D.; Copeland, R. J.

1981-05-01

An assessment of gas-liquid direct-contact heat exchange and of a new storage-coupled system was conducted. Both technical and economic issues are evaluated. Specifically, the storage-coupled combined cycle is compared with a molten salt system. The open Brayton cycle system is used as a topping cycle, and the reject heat powers the molten salt/Rankine system. In this study the molten salt system is left unmodified, the Brayton cycle is integrated on top of a Marietta description of an existing molten salt plant. This compares a nonoptimized combined cycle with an optimized molten salt system.

What makes a good LOFT scenario? Issues in advancing current knowledge of scenario design. [Line Oriented Flight Training

NASA Technical Reports Server (NTRS)

Gregorich, Steven E.

1991-01-01

An effort is made to ascertain which combinations of technical demands and crew coordination should be incorporated in training scenarios in order to maximize the effectiveness of training for crew members. Such high-fidelity simulation, which has come to be known as 'line-oriented flight training' or LOFT, involves the practice of both technical and crew coordination skills in a realistic setting, in conjunction with periodic reviews of performance via videotaped feedback. Attention is given to the integration of appropriate information, the measurement of objective task demands, the character of information from LOFT students, and the leeway allowed LOFT instructors.

Crew systems: integrating human and technical subsystems for the exploration of space.

PubMed

Connors, M M; Harrison, A A; Summit, J

1994-07-01

Space exploration missions will require combining human and technical subsystems into overall "crew systems" capable of performing under the rigorous conditions of outer space. This report describes substantive and conceptual relationships among humans, intelligent machines, and communication systems, and explores how these components may be combined to complement and strengthen one another. We identify key research issues in the combination of humans and technology and examine the role of individual differences, group processes, and environmental conditions. We conclude that a crew system is, in effect, a social cyborg, a living system consisting of multiple individuals whose capabilities are extended by advanced technology.

Crew systems: integrating human and technical subsystems for the exploration of space

NASA Technical Reports Server (NTRS)

Connors, M. M.; Harrison, A. A.; Summit, J.

1994-01-01

Space exploration missions will require combining human and technical subsystems into overall "crew systems" capable of performing under the rigorous conditions of outer space. This report describes substantive and conceptual relationships among humans, intelligent machines, and communication systems, and explores how these components may be combined to complement and strengthen one another. We identify key research issues in the combination of humans and technology and examine the role of individual differences, group processes, and environmental conditions. We conclude that a crew system is, in effect, a social cyborg, a living system consisting of multiple individuals whose capabilities are extended by advanced technology.

NASA Tech Briefs, December 1988. Volume 12, No. 11

NASA Technical Reports Server (NTRS)

1988-01-01

This month's technical section includes forecasts for 1989 and beyond by NASA experts in the following fields: Integrated Circuits; Communications; Computational Fluid Dynamics; Ceramics; Image Processing; Sensors; Dynamic Power; Superconductivity; Artificial Intelligence; and Flow Cytometry. The quotes provide a brief overview of emerging trends, and describe inventions and innovations being developed by NASA, other government agencies, and private industry that could make a significant impact in coming years. A second bonus feature in this month's issue is the expanded subject index that begins on page 98. The index contains cross-referenced listings for all technical briefs appearing in NASA Tech Briefs during 1988.

Nuclear Technology, Global Warming, and the Politicization of Science

NASA Astrophysics Data System (ADS)

Weart, Spencer

2016-03-01

Since the mid 20th century physical scientists have engaged in two fierce public debates on issues that posed existential risks to modern society: nuclear weapons and global warming. The two overlapped with a third major debate over the deployment of nuclear power reactors. Each controversy included technical disagreements raised by a minority among the scientists themselves. Despite efforts to deal with the issues objectively, the scientists became entangled in left vs. right political polarization. All these debates, but particularly the one over climate change, resulted in a deterioration of public faith in the objectivity and integrity of scientists.

Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project) Quality Assurance Management Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fix, N. J.

The scope of the Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project) is to provide technical and integration support to Fluor Hanford, Inc., including operable unit investigations at 300-FF-5 and other groundwater operable units, strategic integration, technical integration and assessments, remediation decision support, and science and technology. This Quality Assurance Management Plan provides the quality assurance requirements and processes that will be followed by the Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project).

Plasma RNA integrity analysis: methodology and validation.

PubMed

Wong, Blenda C K; Lo, Y M Dennis

2006-09-01

The detection of cell-free RNA in plasma and serum of human subjects has found increasing applications in the field of medical diagnostics. However, many questions regarding the biology of circulating RNA remain to be addressed. One issue concerns the molecular nature of these circulating RNA species. We have recently developed a simple and quantitative method to investigate the integrity of plasma RNA. Our results have suggested that cell-free RNA in plasma is generally present as fragmented molecules instead of intact transcripts, with a predominance of 5' fragments. In this article, we summarize the basic principles in the experimental design for plasma RNA integrity analysis and highlight some of the important technical considerations for this type of investigation.

Vocational technical and adult education: Status, trends and issues related to electronic delivery

NASA Technical Reports Server (NTRS)

Rothenberg, D.

1973-01-01

Data are analyzed, and trends and issues are discussed to provide information useful to the systems designer who wishes to identify and assess the opportunities for large scale electronic delivery in vocational/technical and adult education. Issues connected with vocational/technical education are investigated, with emphasis on those issues in the current spotlight which are relevant to the possibilities of electronic delivery. The current role of media is examined in vocational/technical instruction.

Digital government and public health.

PubMed

Fountain, Jane E

2004-10-01

Digital government is typically defined as the production and delivery of information and services inside government and between government and the public using a range of information and communication technologies. Two types of government relationships with other entities are government-to-citizen and government-to-government relationships. Both offer opportunities and challenges. Assessment of a public health agency's readiness for digital government includes examination of technical, managerial, and political capabilities. Public health agencies are especially challenged by a lack of funding for technical infrastructure and expertise, by privacy and security issues, and by lack of Internet access for low-income and marginalized populations. Public health agencies understand the difficulties of working across agencies and levels of government, but the development of new, integrated e-programs will require more than technical change - it will require a profound change in paradigm.

Security challenges in integration of a PHR-S into a standards based national EHR.

PubMed

Mense, Alexander; Hoheiser Pförtner, Franz; Sauermann, Stefan

2014-01-01

Health related data provided by patients themselves is expected to play a major role in future healthcare. Data from personal health devices, vaccination records, health diaries or observations of daily living, for instance, is stored in personal health records (PHR) which are maintained by personal health record systems (PHR-S). Combining this information with medical records provided by healthcare providers in electronic health records (EHR) is one of the next steps towards "personal care". Austria currently sets up a nationwide EHR system that incorporates all healthcare providers and is technically based on international standards (IHE, HL7, OASIS, ...). Looking at the expected potential of merging PHR and EHR data it is worth to analyse integration approaches. Although knowing that an integration requires the coordination of processes, information models and technical architectures, this paper specifically focuses on security issues by evaluating general security requirements for a PHR-S (based on HL7 PHR-S FM), comparing them with the information security specifications for the Austrian's national EHR (based on ISO/IES 27000 series) and identifying the main challenges as well as possible approaches.

Nuclear-safety institution in France: emergence and development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vallet, B.M.

1986-01-01

This research work examines the social construction of the nuclear-safety institution in France, and the concurrent increased focus on the nuclear-risk issue. Emphasis on risk and safety, as primarily technical issues, can partly be seen as a strategy. Employed by power elites in the nuclear technostructure, this diverts emphasis away from controversial and normative questions regarding the political and social consequences of technology to questions of technology that appear to be absolute to the technology itself. Nuclear safety, which started from a preoccupation with risk related to the nuclear energy research and development process, is examined using the analytic conceptmore » of field. As a social arena patterned to achieve specific tasks, this field is dominated by a body of state engineers recognized to have high-level scientific and administrative competences. It is structured by procedures and administrative hierarchies as well as by technical rules, norms, and standards. These are formalized and rationalized through technical, economic, political, and social needs; over time; they consolidate the field into an institution. The study documents the nuclear-safety institution as an integral part of the nuclear technostructure, which has historically used the specificity of its expertise as a buffer against outside interference.« less

Integrating geo-referenced multiscale and multidisciplinary data for the management of biodiversity in livestock genetic resources.

PubMed

Joost, S; Colli, L; Baret, P V; Garcia, J F; Boettcher, P J; Tixier-Boichard, M; Ajmone-Marsan, P

2010-05-01

In livestock genetic resource conservation, decision making about conservation priorities is based on the simultaneous analysis of several different criteria that may contribute to long-term sustainable breeding conditions, such as genetic and demographic characteristics, environmental conditions, and role of the breed in the local or regional economy. Here we address methods to integrate different data sets and highlight problems related to interdisciplinary comparisons. Data integration is based on the use of geographic coordinates and Geographic Information Systems (GIS). In addition to technical problems related to projection systems, GIS have to face the challenging issue of the non homogeneous scale of their data sets. We give examples of the successful use of GIS for data integration and examine the risk of obtaining biased results when integrating datasets that have been captured at different scales.

Engineering Lessons Learned and Systems Engineering Applications

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.

2005-01-01

Systems Engineering is fundamental to good engineering, which in turn depends on the integration and application of engineering lessons learned. Thus, good Systems Engineering also depends on systems engineering lessons learned from within the aerospace industry being documented and applied. About ten percent of the engineering lessons learned documented in the NASA Lessons Learned Information System are directly related to Systems Engineering. A key issue associated with lessons learned datasets is the communication and incorporation of this information into engineering processes. As part of the NASA Technical Standards Program activities, engineering lessons learned datasets have been identified from a number of sources. These are being searched and screened for those having a relation to Technical Standards. This paper will address some of these Systems Engineering Lessons Learned and how they are being related to Technical Standards within the NASA Technical Standards Program, including linking to the Agency's Interactive Engineering Discipline Training Courses and the life cycle for a flight vehicle development program.

Integration of Schemas on the Pre-Design Level Using the KCPM-Approach

NASA Astrophysics Data System (ADS)

Vöhringer, Jürgen; Mayr, Heinrich C.

Integration is a central research and operational issue in information system design and development. It can be conducted on the system, schema, and view or data level. On the system level, integration deals with the progressive linking and testing of system components to merge their functional and technical characteristics and behavior into a comprehensive, interoperable system. Schema integration comprises the comparison and merging of two or more schemas, usually conceptual database schemas. The integration of data deals with merging the contents of multiple sources of related data. View integration is similar to schema integration, however focuses on views and queries on these instead of schemas. All these types of integration have in common, that two or more sources are merged and previously compared, in order to identify matches and mismatches as well as conflicts and inconsistencies. The sources may stem from heterogeneous companies, organizational units or projects. Integration enables the reuse and combined use of source components.

Issues in the design of high dexterity, force reflective teleoperators

NASA Technical Reports Server (NTRS)

Jacobsen, Stephen C.; Iversen, E. K.; Davis, C. C.; Biggers, K. B.; Backman, D. K.

1991-01-01

The Center for Engineering and Design at the University of Utah is developing an anthropomorphic, hydraulically actuated, teleoperated arm. The system includes a sixteen degree-of-freedom slave manipulator controlled by a kinematically identical, sixteen degree-of-freedom force-reflective, exoskeletal master. The project has focused on four areas: (1) formulating a realistic set of design objectives which balance, against technical realities, the desire for performance, reliability and economy; (2) understanding control issues; (3) designing and fabricating new subsystems necessary for the construction of a successful machine; and (4) integrating subsystems, through a series of prototype stages, into an operational teleoperation system.

Tracking Next-Generation Automatic Identification Technology (AIT) into 2035

DTIC Science & Technology

2010-04-01

Non-proliferation and Treaty inspections  Shielding / EMI issues  Security/Integrity/Encryption  Taiwan Shipment Fact Sheet http...followed the technical data, but had no idea that they had a live nuclear warhead. While the nuclear ALCM was loaded on the munitions trailer , the...three-man team continued to assemble the other seven ALCMs. As the end of shift neared, all eight ALCMs were loaded on the munitions trailers and the

Lunar architecture and urbanism, 2nd ed

NASA Technical Reports Server (NTRS)

Sherwood, Brent

2005-01-01

As the space population grows over time, persistent issues of human urbanism will eclipse within a historically short time the technical challenges of space exploration that dominate current efforts. Although urban design teams will have to integrate many new disciplines into their already renaissance array of expertise, doing so will enable them to adapt ancient, proven solutions to opportunities afforded by expanding urbanism offworld. This paper updates the author's original 1988 treatment of the subject.

AstroGrid: Taverna in the Virtual Observatory .

NASA Astrophysics Data System (ADS)

Benson, K. M.; Walton, N. A.

This paper reports on the implementation of the Taverna workbench by AstroGrid, a tool for designing and executing workflows of tasks in the Virtual Observatory. The workflow approach helps astronomers perform complex task sequences with little technical effort. Visual approach to workflow construction streamlines highly complex analysis over public and private data and uses computational resources as minimal as a desktop computer. Some integration issues and future work are discussed in this article.

3D Geological modelling - towards a European level infrastructure

NASA Astrophysics Data System (ADS)

Lee, Kathryn A.; van der Krogt, Rob; Busschers, Freek S.

2013-04-01

The joint European Geological Surveys are preparing the ground for a "European Geological Data Infrastructure" (EGDI), under the framework of the FP7-project EGDI-Scope. This scoping study, started in June 2012, for a pan-European e-Infrastructure is based on the successes of earlier joint projects including 'OneGeology-Europe' and aims to provide the backbone for serving interoperable, geological data currently held by European Geological Surveys. Also data from past, ongoing and future European projects will be incorporated. The scope will include an investigation of the functional and technical requirements for serving 3D geological models and will look to research the potential for providing a framework to integrate models at different scales, and form a structure for enabling the development of new and innovative model delivery mechanisms. The EGDI-scope project encourages pan-European inter-disciplinary collaboration between all European Geological Surveys. It aims to enhance emerging web based technologies that will facilitate the delivery of geological data to user communities involved in European policy making and international industry, but also to geoscientific research communities and the general public. Therefore, stakeholder input and communication is imperative to the success, as is the collaboration with all the Geological Surveys of Europe. The most important functional and technical requirements for delivery of such information at pan-European level will be derived from exchanges with relevant European stakeholder representatives and providers of geological data. For handling and delivering 3D geological model data the project will need to address a number of strategic issues: • Which are the most important issues and queries for the relevant stakeholders, requiring 3D geological models? How can this be translated to functional requirements for development and design of an integrated European application? • How to handle the very large differences in quality and scales with regard to 3D geological modelling in different European countries and regions, within a harmonized European framework? • How to handle the differences in model concepts and perceptions, especially with regard to the leading developers of 3D geological models within Europe? • How to handle differences between participating countries concerning relevant legal issues, governance, and funding models? With a primary focus on these issues, the EGDI-Scope study will provide a number of possible scenarios for delivery of 3D geological models and information within an integrated European application, including the most relevant technical, legal and organizational consequences.

Proceedings of the NSSDC Conference on Mass Storage Systems and Technologies for Space and Earth Science Applications

NASA Technical Reports Server (NTRS)

Blackwell, Kim; Blasso, Len (Editor); Lipscomb, Ann (Editor)

1991-01-01

The proceedings of the National Space Science Data Center Conference on Mass Storage Systems and Technologies for Space and Earth Science Applications held July 23 through 25, 1991 at the NASA/Goddard Space Flight Center are presented. The program includes a keynote address, invited technical papers, and selected technical presentations to provide a broad forum for the discussion of a number of important issues in the field of mass storage systems. Topics include magnetic disk and tape technologies, optical disk and tape, software storage and file management systems, and experiences with the use of a large, distributed storage system. The technical presentations describe integrated mass storage systems that are expected to be available commercially. Also included is a series of presentations from Federal Government organizations and research institutions covering their mass storage requirements for the 1990's.

Computer integration of engineering design and production: A national opportunity

NASA Astrophysics Data System (ADS)

1984-10-01

The National Aeronautics and Space Administration (NASA), as a purchaser of a variety of manufactured products, including complex space vehicles and systems, clearly has a stake in the advantages of computer-integrated manufacturing (CIM). Two major NASA objectives are to launch a Manned Space Station by 1992 with a budget of $8 billion, and to be a leader in the development and application of productivity-enhancing technology. At the request of NASA, a National Research Council committee visited five companies that have been leaders in using CIM. Based on these case studies, technical, organizational, and financial issues that influence computer integration are described, guidelines for its implementation in industry are offered, and the use of CIM to manage the space station program is recommended.

Computer integration of engineering design and production: A national opportunity

NASA Technical Reports Server (NTRS)

1984-01-01

The National Aeronautics and Space Administration (NASA), as a purchaser of a variety of manufactured products, including complex space vehicles and systems, clearly has a stake in the advantages of computer-integrated manufacturing (CIM). Two major NASA objectives are to launch a Manned Space Station by 1992 with a budget of $8 billion, and to be a leader in the development and application of productivity-enhancing technology. At the request of NASA, a National Research Council committee visited five companies that have been leaders in using CIM. Based on these case studies, technical, organizational, and financial issues that influence computer integration are described, guidelines for its implementation in industry are offered, and the use of CIM to manage the space station program is recommended.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hurlbut, David; Zhou, Ella; Bird, Lori

A strategically planned transmission network is an important source of flexibility for the integration of large-scale renewable energy (RE). Such a network can offer access to a broad geographic diversity of resources, which can reduce flexibility needs and facilitate sharing between neighboring balancing areas. This report builds on two previous NREL technical reports - Advancing System Flexibility for High Penetration Renewable Integration (Milligan et al. 2015) and 'Renewables-Friendly' Grid Development Strategies (Hurlbut et al. 2015) - which discuss various flexibility options and provide an overview of U.S. market models and grid planning. This report focuses on addressing issues with cross-regional/provincialmore » transmission in China with the aim of integrating renewable resources that are concentrated in remote areas and require inter-regional/provincial power exchange.« less

Federal Agency Scientific Integrity Policies and the Legal Landscape

NASA Astrophysics Data System (ADS)

Kurtz, L.

2017-12-01

Federal agencies have worked to develop scientific integrity policies to promote the use of scientific and technical information in policymaking, reduce special-interest influences, and increase transparency. Following recent allegations of agency misconduct, these policies are now more important than ever. In addition to setting standards, scientific integrity policies also provide avenues for whistleblowers to complain about perceived violations. While these policies have their shortcomings (which may differ by agency), they are also one of the better available options for upholding principles of scientific integrity within the federal government. A legal perspective will be offered on what sorts of issues might rise to the threshold to make an official complaint, and the process of actually making a complaint. Other legal avenues for complaining about scientific integrity violations will also be discussed, such as complaints filed with the U.S. Office of Special Counsel or an agency's Office of Inspector General, and bringing the matter to federal court.

Scaling green rubber cultivation in Southwest China-An integrative analysis of stakeholder perspectives.

PubMed

Wigboldus, Seerp; Hammond, Jim; Xu, Jianchu; Yi, Zhuang-Fang; He, Jun; Klerkx, Laurens; Leeuwis, Cees

2017-02-15

The rubber boom across much of Southeast Asia has led to environmental destruction, and the resultant crash in the price of rubber has destabilised livelihoods. We investigated the necessary factors required to enable a transition towards a more sustainable model for rubber cultivation in Southwest China (i.e. the 'greening' of rubber cultivation), using a framework for the integrative study of multiple aspects in complex land use issues. We present findings from stakeholder interviews and a stakeholder workshop, and discuss their relevance within and beyond Southwest China. The current focus of researchers and development practitioners tends to be on finding technical solutions to address unsustainable rubber cultivation practices. However, stakeholder consultations revealed that the key barriers were more social: low levels of trust and knowledge exchange between stakeholder groups and fragmented visions about the future of the landscape. It is very important to continue the economic prosperity initially brought by rubber, but, without improved communication between government and researchers and smallholder farmers, this will be very difficult to achieve. A wider landscape perspective is needed to address issues in rubber cultivation to avoid repeating the same problems of cash crop boom and bust experienced with other crops, most notably bananas. We conclude that more effort should be put into developing mechanisms that integrate technical knowledge, enhance social relationships, and present a forum for reconciling - or at least acknowledging - the differing needs, knowledge, and objectives of different groups, and transcending the power dynamics between smallholder farmers and government and researchers. Copyright © 2016 The Author(s). Published by Elsevier B.V. All rights reserved.

Dynamic Radioisotope Power System Development for Space Explorations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qualls, A L

Dynamic power conversion offers the potential to produce radioisotope power systems (RPS) that generate higher power outputs and utilize the Pu-238 radioisotope more efficiently than Radioisotope Thermoelectric Generators (RTG). Additionally, dynamic systems also offer the potential of producing generators with significantly reduced power degradation over the course of deep space missions so that more power will be available at the end of the mission when it is needed for both powering the science and transmitting the results. The development of dynamic generators involves addressing technical issues not typically associated with traditional thermoelectric generators. Developing long-life, robust and reliable dynamic conversionmore » technology is challenging yet essential to building a suitable generator. Considerations include working within existing handling infrastructure where possible so that development costs can be kept low and integrating dynamic generators into spacecraft, which may be more complex than integration of static systems. Methods of interfacing to and controlling a dynamic generator must be considered and new potential failure modes must be taken into account. This paper will address some of the key issues of dynamic RPS design, development and adaption.Dynamic power conversion offers the potential to produce Radioisotope Power Systems (RPS) that generate higher power outputs and utilize the available heat source plutonium fuel more efficiently than Radioisotope Thermoelectric Generators. Additionally, dynamic systems offer the potential of producing generators with significantly reduced power degradation over the course of deep space missions so that more power would be available at the end of the mission, when it is needed most for both powering science instruments and transmitting the resulting data. The development of dynamic generators involves addressing technical issues not typically associated with traditional thermoelectric generators. Developing long-life, robust, and reliable dynamic conversion technology is challenging yet essential to building a suitable flight-ready generator. Considerations include working within existing hardware-handling infrastructure, where possible, so that development costs can be kept low, and integrating dynamic generators into spacecraft, which may be more complex than integration of static thermoelectric systems. Methods of interfacing to and controlling a dynamic generator must also be considered, and new potential failure modes must be taken into account. This paper will address some of the key issues of dynamic RPS design, development, and adaption.« less

Energizing Government Decision-Makers with the Facts on Solar Technology, Policy, and Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

The Solar Technical Assistance Team (STAT) is a network of solar technology and implementation experts who provide timely, unbiased expertise to assist policymakers and regulators in making informed decisions about solar programs and policies. Government officials can submit requests directly to the STAT for technical assistance. STAT then partners with experts in solar policy, regulation, finance, technology, and other areas to deliver accurate, up-to-date information to state and local decision makers. The STAT responds to requests on a wide range of issues -- including, but not limited to, feed-in tariffs, renewable portfolio standards, rate design, program design, workforce and economicmore » impacts of solar on jurisdictions, and project financing.« less

Engineering Lessons Learned and Systems Engineering Applications

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.

2005-01-01

Systems Engineering is fundamental to good engineering, which in turn depends on the integration and application of engineering lessons learned and technical standards. Thus, good Systems Engineering also depends on systems engineering lessons learned from within the aerospace industry being documented and applied. About ten percent of the engineering lessons learned documented in the NASA Lessons Learned Information System are directly related to Systems Engineering. A key issue associated with lessons learned datasets is the communication and incorporation of this information into engineering processes. Systems Engineering has been defined (EINIS-632) as "an interdisciplinary approach encompassing the entire technical effort to evolve and verify an integrated and life-cycle balanced set of system people, product, and process solutions that satisfy customer needs". Designing reliable space-based systems has always been a goal for NASA, and many painful lessons have been learned along the way. One of the continuing functions of a system engineer is to compile development and operations "lessons learned" documents and ensure their integration into future systems development activities. They can produce insights and information for risk identification identification and characterization. on a new project. Lessons learned files from previous projects are especially valuable in risk

Methodology for the comparative assessment of the Satellite Power System (SPS) and alternative technologies

NASA Technical Reports Server (NTRS)

Wolsko, T.; Buehring, W.; Cirillo, R.; Gasper, J.; Habegger, L.; Hub, K.; Newsom, D.; Samsa, M.; Stenehjem, E.; Whitfield, R.

1980-01-01

The energy systems concerned are the satellite power system, several coal technologies, geothermal energy, fission, fusion, terrestrial solar systems, and ocean thermal energy conversion. Guidelines are suggested for the characterization of these systems, side-by-side analysis, alternative futures analysis, and integration and aggregation of data. A description of the methods for assessing the technical, economic, environmental, societal, and institutional issues surrounding the development of the selected energy technologies is presented.

Mechanistic and Technical Challenges in Studying the Human Microbiome and Cancer Epidemiology.

PubMed

Verma, Mukesh

2017-04-01

This article reviews the significance of the microbiome in cancer epidemiology, mechanistic and technical challenges in the field, and characterization of the microbiome in different tumor types to identify biomarkers of risk, progression, and prognosis. Publications on the microbiome and cancer epidemiology were reviewed to analyze sample collection and processing, microbiome taxa characterization by 16S ribosomal RNA sequencing, and microbiome metabolite characterization (metabotyping) by nuclear magnetic resonance and mass spectrometry. The analysis identified methodology types, research design, sample types, and issues in integrating data from different platforms. Aerodigestive cancer epidemiology studies conducted by different groups demonstrated the significance of microbiome information in developing approaches to improve health. Challenges exist in sample preparation and processing (eg, standardization of methods for collection and analysis). These challenges relate to technology, data integration from "omics" studies, inherent bias in primer selection during 16S ribosomal RNA sequencing, the need for large consortia with well-characterized biospecimens, cause and effect issues, resilience of microbiota to exposure events (requires longitudinal studies), and expanding studies for fungal and viral diversity (most studies used bacterial 16S ribosomal RNA sequencing for microbiota characterization). Despite these challenges, microbiome and cancer epidemiology studies are significant and may facilitate cancer risk assessment, diagnosis, and prognosis. In the future, clinical trials likely will use microbiota modifications to improve the efficacy of existing treatments.

Mechanistic and Technical Challenges in Studying the Human Microbiome and Cancer Epidemiology

PubMed Central

2016-01-01

This article reviews the significance of the microbiome in cancer epidemiology, mechanistic and technical challenges in the field, and characterization of the microbiome in different tumor types to identify biomarkers of risk, progression, and prognosis. Publications on the microbiome and cancer epidemiology were reviewed to analyze sample collection and processing, microbiome taxa characterization by 16S ribosomal RNA sequencing, and microbiome metabolite characterization (metabotyping) by nuclear magnetic resonance and mass spectrometry. The analysis identified methodology types, research design, sample types, and issues in integrating data from different platforms. Aerodigestive cancer epidemiology studies conducted by different groups demonstrated the significance of microbiome information in developing approaches to improve health. Challenges exist in sample preparation and processing (eg, standardization of methods for collection and analysis). These challenges relate to technology, data integration from “omics” studies, inherent bias in primer selection during 16S ribosomal RNA sequencing, the need for large consortia with well-characterized biospecimens, cause and effect issues, resilience of microbiota to exposure events (requires longitudinal studies), and expanding studies for fungal and viral diversity (most studies used bacterial 16S ribosomal RNA sequencing for microbiota characterization). Despite these challenges, microbiome and cancer epidemiology studies are significant and may facilitate cancer risk assessment, diagnosis, and prognosis. In the future, clinical trials likely will use microbiota modifications to improve the efficacy of existing treatments. PMID:27121074

48 CFR 2452.237-73 - Conduct of Work and Technical Guidance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... conditions of the contract. (c) The GTR will issue technical guidance in writing or, if issued orally, he/she... Technical Guidance. 2452.237-73 Section 2452.237-73 Federal Acquisition Regulations System DEPARTMENT OF... Provisions and Clauses 2452.237-73 Conduct of Work and Technical Guidance. As prescribed in 2437.110(d...

Gender Issues in Technical Communication Studies: An Overview of the Implications for the Profession, Research, and Pedagogy.

ERIC Educational Resources Information Center

Allen, Jo

1991-01-01

Presents an overview of research and unanswered questions related to gender issues in technical communication. Addresses the consequences of the feminization of technical communication, research on gender differences in technical communication, and the means for encouraging a more gender-balanced view of business and industry. (SR)

High-speed civil transport issues and technology program

NASA Technical Reports Server (NTRS)

Hewett, Marle D.

1992-01-01

A strawman program plan is presented, consisting of technology developments and demonstrations required to support the construction of a high-speed civil transport. The plan includes a compilation of technology issues related to the development of a transport. The issues represent technical areas in which research and development are required to allow airframe manufacturers to pursue an HSCT development. The vast majority of technical issues presented require flight demonstrated and validated solutions before a transport development will be undertaken by the industry. The author believes that NASA is the agency best suited to address flight demonstration issues in a concentrated effort. The new Integrated Test Facility at NASA Dryden Flight Research Facility is considered ideally suited to the task of supporting ground validations of proof-of-concept and prototype system demonstrations before night demonstrations. An elaborate ground hardware-in-the-loop (iron bird) simulation supported in this facility provides a viable alternative to developing an expensive fill-scale prototype transport technology demonstrator. Drygen's SR-71 assets, modified appropriately, are a suitable test-bed for supporting flight demonstrations and validations of certain transport technology solutions. A subscale, manned or unmanned flight demonstrator is suitable for flight validation of transport technology solutions, if appropriate structural similarity relationships can be established. The author contends that developing a full-scale prototype transport technology demonstrator is the best alternative to ensuring that a positive decision to develop a transport is reached by the United States aerospace industry.

Issues, impacts, and implications of shrimp aquaculture in Thailand

NASA Astrophysics Data System (ADS)

Dierberg, Forrest E.; Kiattisimkul, Woraphan

1996-09-01

Water quality impacts to and from intensive shrimp aquaculture in Thailand are substantial. Besides the surface and subsurface salinization of freshwaters, loadings of solids, oxygen-consuming organic matter, and nutrients to receiving waters are considerable when the cumulative impacts from water exchange during the growout cycle, pond drainage during harvesting, and illegal pond sediment disposal are taken into account. Although just beginning to be considered in Thailand, partial recirculating and integrated intensive farming systems are producing promising, if somewhat limited, results. By providing on-site treatment of the effluent from the shrimp growout ponds, there is less reliance on using outside water supplies, believed to be the source of the contamination. The explosion in the number of intensively operated shrimp farms has not only impacted the coastal zone of Thailand, but has also resulted in an unsustainable aquaculture industry. Abandonment of shrimp ponds due to either drastic, disease-caused collapses or more grandual, year-to-year reductions in the productivity of the pond is common. To move Thailand towards a more sustainable aquaculture industry and coastal zone environment, integrated aquaculture management is needed. Components of integrated aquaculture management are technical and institutional. The technical components involve deployment of wastewater treatment and minimal water-use systems aimed at making aquaculture operations more hydraulically closed. Before this is possible, technical and economic feasibility studies on enhanced nitrification systems and organic solids removal by oxidation between production cycles and/or the utilization of plastic pond liners need to be conducted. The integration of semi-intensive aquaculture within mangrove areas also should be investigated since mangrove losses attributable to shrimp aquaculture are estimated to be between 16 and 32% of the total mangrove area destroyed betweeen 1979 and 1993. Government policy needs to devote as much attention to sustainability issues as it has on promoting intensive pond culture. Such a balanced policy would include training and education monitoring and enforcement, rehabilitating abandoned ponds, managing land use within the coastal zone, more community involvement, and government reorganization to eliminate overlapping jurisdictions among agencies. As integrated aquaculture management becomes more the practice than the exception, less risk of crop failure to the industry and reduced discharge loadings from intensively managed shrimp ponds to receiving waters can be expected. Projected limitations on growing and marketing shrimp in the future, such as scarcity of land and broodstock, continued disease outbreaks, negative publicity, regulatory enforcement, water treatment and solids disposal costs, and increased competition from growers in other Asian countries will also drive the government and the industry towards adopting integrated aquaculture management.

Integrating remote sensing, geographic information systems and global positioning system techniques with hydrological modeling

NASA Astrophysics Data System (ADS)

Thakur, Jay Krishna; Singh, Sudhir Kumar; Ekanthalu, Vicky Shettigondahalli

2017-07-01

Integration of remote sensing (RS), geographic information systems (GIS) and global positioning system (GPS) are emerging research areas in the field of groundwater hydrology, resource management, environmental monitoring and during emergency response. Recent advancements in the fields of RS, GIS, GPS and higher level of computation will help in providing and handling a range of data simultaneously in a time- and cost-efficient manner. This review paper deals with hydrological modeling, uses of remote sensing and GIS in hydrological modeling, models of integrations and their need and in last the conclusion. After dealing with these issues conceptually and technically, we can develop better methods and novel approaches to handle large data sets and in a better way to communicate information related with rapidly decreasing societal resources, i.e. groundwater.

The Method of Multiple Spatial Planning Basic Map

NASA Astrophysics Data System (ADS)

Zhang, C.; Fang, C.

2018-04-01

The "Provincial Space Plan Pilot Program" issued in December 2016 pointed out that the existing space management and control information management platforms of various departments were integrated, and a spatial planning information management platform was established to integrate basic data, target indicators, space coordinates, and technical specifications. The planning and preparation will provide supportive decision support, digital monitoring and evaluation of the implementation of the plan, implementation of various types of investment projects and space management and control departments involved in military construction projects in parallel to approve and approve, and improve the efficiency of administrative approval. The space planning system should be set up to delimit the control limits for the development of production, life and ecological space, and the control of use is implemented. On the one hand, it is necessary to clarify the functional orientation between various kinds of planning space. On the other hand, it is necessary to achieve "multi-compliance" of various space planning. Multiple spatial planning intergration need unified and standard basic map(geographic database and technical specificaton) to division of urban, agricultural, ecological three types of space and provide technical support for the refinement of the space control zoning for the relevant planning. The article analysis the main space datum, the land use classification standards, base map planning, planning basic platform main technical problems. Based on the geographic conditions, the results of the census preparation of spatial planning map, and Heilongjiang, Hainan many rules combined with a pilot application.

Local soil quality assessment of north-central Namibia: integrating farmers' and technical knowledge

NASA Astrophysics Data System (ADS)

Prudat, Brice; Bloemertz, Lena; Kuhn, Nikolaus J.

2018-02-01

Soil degradation is a major threat for farmers of semi-arid north-central Namibia. Soil conservation practices can be promoted by the development of soil quality (SQ) evaluation toolboxes that provide ways to evaluate soil degradation. However, such toolboxes must be adapted to local conditions to reach farmers. Based on qualitative (interviews and soil descriptions) and quantitative (laboratory analyses) data, we developed a set of SQ indicators relevant for our study area that integrates farmers' field experiences (FFEs) and technical knowledge. We suggest using participatory mapping to delineate soil units (Oshikwanyama soil units, KwSUs) based on FFEs, which highlight mostly soil properties that integrate long-term productivity and soil hydrological characteristics (i.e. internal SQ). The actual SQ evaluation of a location depends on the KwSU described and is thereafter assessed by field soil texture (i.e. chemical fertility potential) and by soil colour shade (i.e. SOC status). This three-level information aims to reveal SQ improvement potential by comparing, for any location, (a) estimated clay content against median clay content (specific to KwSU) and (b) soil organic status against calculated optimal values (depends on clay content). The combination of farmers' and technical assessment cumulates advantages of both systems of knowledge, namely the integrated long-term knowledge of the farmers and a short- and medium-term SQ status assessment. The toolbox is a suggestion for evaluating SQ and aims to help farmers, rural development planners and researchers from all fields of studies understanding SQ issues in north-central Namibia. This suggested SQ toolbox is adapted to a restricted area of north-central Namibia, but similar tools could be developed in most areas where small-scale agriculture prevails.

Construction of the food and nutrition security policy in Brazil: strategies and challenges in the promotion of intersectorality at the federal government level.

PubMed

Burlandy, Luciene

2009-01-01

This article analyzes institutional strategies of the Brazilian federal government that aim at promoting intersectorality in the field of Food and Nutrition Security (FNS), based on bibliographic review and document analysis. It is assumed that, although formal institutionality in this government level is not enough to promote intersectorality, it is important in process induction. It follows that the combination of different institutional mechanisms favors intersectorality, such as: the existence and location of councils integrated by government sectors and civil society in the presidency; political support by the presidency and inclusion of the issue as being strategic in the governmental agenda; assembly of institutional spaces that articulate the highest government spheres and that integrate technical levels; programs that integrate food production, commercialization, and consumption. Challenges concern interrelation with economic policy and the construction of budget agreed among sectors, integrated to policy management and monitoring.

Design of an Integrated Division-Level Battle Simulation for Research, Development, and Training. Volume 2. Detailed Design Notes

DTIC Science & Technology

1979-08-01

frag orders for tactical considerations. Frag orders issued by simulated modules will be " edited " by the same procedure as that used with populated...record and distributed as required. Queries transmitted from any staff module will be reviewed and edited at event time for technical accuracy. If an...of this kind will have to be carefully edited and interpreted by the control- ler(s) and/or computer before the chanqe is instituted in the real world

Fifth Conference on Artificial Intelligence for Space Applications

NASA Technical Reports Server (NTRS)

Odell, Steve L. (Compiler)

1990-01-01

The Fifth Conference on Artificial Intelligence for Space Applications brings together diverse technical and scientific work in order to help those who employ AI methods in space applications to identify common goals and to address issues of general interest in the AI community. Topics include the following: automation for Space Station; intelligent control, testing, and fault diagnosis; robotics and vision; planning and scheduling; simulation, modeling, and tutoring; development tools and automatic programming; knowledge representation and acquisition; and knowledge base/data base integration.

Integrated orbital servicing study follow-on. Volume 2: Technical analysis and system design

NASA Technical Reports Server (NTRS)

1978-01-01

In-orbit service functional and physical requirements to support both low and high Earth orbit servicing/maintenance operations were defined, an optimum servicing system configuration was developed and mockups and early prototype hardware were fabricated to demonstrate and validate the concepts selected. Significant issues addressed include criteria for concept selection; representative mission equipment and approaches to their design for serviceability; significant serviceable spacecraft design aspects; servicer mechanism operation in one-g; approaches for the demonstration/simulation; and service mechanism structure design approach.

Integrated Data Collection Analysis (IDCA) Program - Final Review September 12, 2012 at DHS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sandstrom, Mary M.; Brown, Geoffrey W.; Warner, Kirstin F.

The Integrated Data Collection Analysis (IDCA) program conducted a final program review at the Department of Homeland Security on September 12, 2012. The review was focused on the results of the program over the complete performance period. A summary presentation delineating the accomplished tasks started the meeting, followed by technical presentations on various issues that arose during the performance period. The presentations were completed with a statistical evaluation of the testing results from all the participants in the IDCA Proficiency Test study. The meeting closed with a discussion of potential sources of funding for continuing work to resolve some ofmore » these technical issues. This effort, funded by the Department of Homeland Security (DHS), put the issues of safe handling of these materials in perspective with standard military explosives. The study added Small-Scale Safety and Thermal (SSST) testing results for a broad suite of different HMEs to the literature, and suggested new guidelines and methods to develop safe handling practices for HMEs. Each participating testing laboratory used identical test materials and preparation methods wherever possible. Note, however, the test procedures differ among the laboratories. The results were compared among the laboratories and then compared to historical data from various sources. The testing performers involved were Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Naval Surface Warfare Center, Indian Head Division (NSWC IHD), Sandia National Laboratories (SNL), and Air Force Research Laboratory, Tyndall AFB (AFRL/RXQL). These tests were conducted as a proficiency study in order to establish some consistency in test protocols, procedures, and experiments and to compare results when these testing variables cannot be made consistent.« less

Renewable Electricity Futures Study Executive Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mai, Trieu; Sandor, Debra; Wiser, Ryan

2012-12-01

The Renewable Electricity Futures Study (RE Futures) provides an analysis of the grid integration opportunities, challenges, and implications of high levels of renewable electricity generation for the U.S. electric system. The study is not a market or policy assessment. Rather, RE Futures examines renewable energy resources and many technical issues related to the operability of the U.S. electricity grid, and provides initial answers to important questions about the integration of high penetrations of renewable electricity technologies from a national perspective. RE Futures results indicate that a future U.S. electricity system that is largely powered by renewable sources is possible andmore » that further work is warranted to investigate this clean generation pathway.« less

Vulnerability assessment of a port and harbor community to earthquake and tsunami hazards: Integrating technical expert and stakeholder input

USGS Publications Warehouse

Wood, Nathan J.; Good, James W.; Goodwin, Robert F.

2002-01-01

Research suggests that the Pacific Northwest could experience catastrophic earthquakes and tsunamis in the near future, posing a significant threat to the numerous ports and harbors along the coast. A collaborative, multiagency initiative is underway to increase the resiliency of Pacific Northwest ports and harbors to these hazards, involving Oregon Sea Grant, Washington Sea Grant, the National Oceanic and Atmospheric Administration Coastal Services Center, and the U.S. Geological Survey Center for Science Policy. One element of this research, planning, and outreach initiative is a natural hazard mitigation and emergency preparedness planning process that combines technical expertise with local stakeholder values and perceptions. This paper summarizes and examines one component of the process, the vulnerability assessment methodology, used in the pilot port and harbor community of Yaquina River, Oregon, as a case study of assessing vulnerability at the local level. In this community, stakeholders were most concerned with potential life loss and other nonstructural vulnerability issues, such as inadequate hazard awareness, communication, and response logistics, rather than structural issues, such as damage to specific buildings or infrastructure.

Shifting from presumptive to test-based management of malaria - technical basis and implications for malaria control in Ghana.

PubMed

Baiden, F; Malm, K; Bart-Plange, C; Hodgson, A; Chandramohan, D; Webster, J; Owusu-Agyei, S

2014-06-01

The presumptive approach was the World Health Organisation (WHO) recommended to the management of malaria for many years and this was incorporated into syndromic guidelines such as the Integrated Management of Childhood Illnesses (IMCI). In early 2010 however, WHO issued revised treatment guidelines that call for a shift from the presumptive to the test-based approach. Practically, this implies that in all suspected cases, the diagnosis of uncomplicated malaria should be confirmed using rapid test before treatment is initiated. This revision effectively brings to an end an era of clinical practice that span several years. Its implementation has important implications for the health systems in malaria-endemic countries. On the basis of research in Ghana and other countries, and evidence from program work, the Ghana National Malaria Control Program has issued revised national treatment guidelines that call for implementation of test-based management of malaria in all cases, and across all age groups. This article reviews the evidence and the technical basis for the shift to test-based management and examines the implications for malaria control in Ghana.

Integrating technical and non-technical skills coaching in an acute trauma surgery team training: Is it too much?

PubMed

Alken, Alexander; Luursema, Jan-Maarten; Weenk, Mariska; Yauw, Simon; Fluit, Cornelia; van Goor, Harry

2017-08-25

Research on effective integration of technical and non-technical skills in surgery team training is sparse. In a previous study we found that surgical teachers predominantly coached on technical and hardly on non-technical skills during the Definitive Surgical and Anesthetic Trauma Care (DSATC) integrated acute trauma surgery team training. This study aims to investigate whether the priming of teachers could increase the amount of non-technical skills coaching during such a training. Coaching activities of 12 surgical teachers were recorded on audio and video. Six teachers were primed on non-technical skills coaching prior to the training. Six others received no priming and served as controls. Blind observers reviewed the recordings of 2 training scenario's and scored whether the observed behaviors were directed on technical or non-technical skills. We compared the frequency of the non-technical skills coaching between the primed and the non-primed teachers and analyzed for differences according to the trainees' level of experience. Surgical teachers coached trainees during the highly realistic DSATC integrated acute trauma surgery team training. Trainees performed damage control surgery in operating teams on anesthetized porcine models during 6 training scenario's. Twelve experienced surgical teachers participated in this study. Coaching on non-technical skills was limited to about 5%. The primed teachers did not coach more often on non-technical skills than the non-primed teachers. We found no differences in the frequency of non-technical skills coaching based on the trainees' level of experience. Priming experienced surgical teachers does not increase the coaching on non-technical skills. The current DSATC acute trauma surgery team training seems too complex for integrating training on technical and non-technical skills. Patient care, Practice based learning and improvement. Copyright © 2017 Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neumann, Scott; Britton, Jay; Devos, Arnold N.

There are many uses for the Common Information Model (CIM), an ontology that is being standardized through Technical Committee 57 of the International Electrotechnical Commission (IEC TC57). The most common uses to date have included application modeling, information exchanges, information management and systems integration. As one should expect, there are many issues that become apparent when the CIM ontology is applied to any one use. Some of these issues are shortcomings within the current draft of the CIM, and others are a consequence of the different ways in which the CIM can be applied using different technologies. As the CIMmore » ontology will and should evolve, there are several dangers that need to be recognized. One is overall consistency and impact upon applications when extending the CIM for a specific need. Another is that a tight coupling of the CIM to specific technologies could limit the value of the CIM in the longer term as an ontology, which becomes a larger issue over time as new technologies emerge. The integration of systems is one specific area of interest for application of the CIM ontology. This is an area dominated by the use of XML for the definition of messages. While this is certainly true when using Enterprise Application Integration (EAI) products, it is even more true with the movement towards the use of Web Services (WS), Service-Oriented Architectures (SOA) and Enterprise Service Buses (ESB) for integration. This general IT industry trend is consistent with trends seen within the IEC TC57 scope of power system management and associated information exchange. The challenge for TC57 is how to best leverage the CIM ontology using the various XML technologies and standards for integration. This paper will provide examples of how the CIM ontology is used and describe some specific issues that should be addressed within the CIM in order to increase its usefulness as an ontology. It will also describe some of the issues and challenges that will be faced as the CIM ontology is leveraged for integration purposes by IEC TC57 standards.« less

NSSDC Conference on Mass Storage Systems and Technologies for Space and Earth Science Applications, volume 2

NASA Technical Reports Server (NTRS)

Kobler, Ben (Editor); Hariharan, P. C. (Editor); Blasso, L. G. (Editor)

1992-01-01

This report contains copies of nearly all of the technical papers and viewgraphs presented at the NSSDC Conference on Mass Storage Systems and Technologies for Space and Earth Science Application. This conference served as a broad forum for the discussion of a number of important issues in the field of mass storage systems. Topics include the following: magnetic disk and tape technologies; optical disk and tape; software storage and file management systems; and experiences with the use of a large, distributed storage system. The technical presentations describe, among other things, integrated mass storage systems that are expected to be available commercially. Also included is a series of presentations from Federal Government organizations and research institutions covering their mass storage requirements for the 1990's.

NSSDC Conference on Mass Storage Systems and Technologies for Space and Earth Science Applications, volume 3

NASA Technical Reports Server (NTRS)

Kobler, Ben (Editor); Hariharan, P. C. (Editor); Blasso, L. G. (Editor)

1992-01-01

This report contains copies of nearly all of the technical papers and viewgraphs presented at the National Space Science Data Center (NSSDC) Conference on Mass Storage Systems and Technologies for Space and Earth Science Applications. This conference served as a broad forum for the discussion of a number of important issues in the field of mass storage systems. Topics include magnetic disk and tape technologies, optical disk and tape, software storage and file management systems, and experiences with the use of a large, distributed storage system. The technical presentations describe, among other things, integrated mass storage systems that are expected to be available commercially. Also included is a series of presentations from Federal Government organizations and research institutions covering their mass storage requirements for the 1990s.

Maneuverability and mobility in palm-sized legged robots

NASA Astrophysics Data System (ADS)

Kohut, Nicholas J.; Birkmeyer, Paul M.; Peterson, Kevin C.; Fearing, Ronald S.

2012-06-01

Palm sized legged robots show promise for military and civilian applications, including exploration of hazardous or difficult to reach places, search and rescue, espionage, and battlefield reconnaissance. However, they also face many technical obstacles, including- but not limited to- actuator performance, weight constraints, processing power, and power density. This paper presents an overview of several robots from the Biomimetic Millisystems Laboratory at UC Berkeley, including the OctoRoACH, a steerable, running legged robot capable of basic navigation and equipped with a camera and active tail; CLASH, a dynamic climbing robot; and BOLT, a hybrid crawling and flying robot. The paper also discusses, and presents some preliminary solutions to, the technical obstacles listed above plus issues such as robustness to unstructured environments, limited sensing and communication bandwidths, and system integration.

Integration of space geodesy: A US National Geodetic Observatory

NASA Astrophysics Data System (ADS)

Yunck, Thomas P.; Neilan, Ruth E.

2005-11-01

In the interest of improving the performance and efficiency of space geodesy a diverse group in the US, in collaboration with IGGOS, has begun to establish a unified National Geodetic Observatory (NGO). To launch this effort an international team will conduct a multi-year program of research into the technical issues of integrating SLR, VLBI, and GPS geodesy to produce a unified set of global geodetic products. The goal is to improve measurement accuracy by up to an order of magnitude while lowering the cost to current sponsors. A secondary goal is to expand and diversify international sponsorship of space geodesy. Principal benefits will be to open new vistas of research in geodynamics and surface change while freeing scarce NASA funds for scientific studies. NGO will proceed in partnership with, and under the auspices of, the International Association of Geodesy (IAG) as an element of the Integrated Global Geodetic Observation System project. The collaboration will be conducted within, and will make full use of, the IAG's existing international services: the IGS, IVS, ILRS, and IERS. Seed funding for organizational activities and technical analysis will come from NASA's Solid Earth and Natural Hazards Program. Additional funds to develop an integrated geodetic data system known as Inter-service Data Integration for Geodetic Operations (INDIGO), will come from a separate NASA program in Earth science information technology. INDIGO will offer ready access to the full variety of NASA's space geodetic data and will extend the GPS Seamless Archive (GSAC) philosophy to all space geodetic data types.

Methods for heat transfer and temperature field analysis of the insulated diesel

NASA Technical Reports Server (NTRS)

Morel, T.; Blumberg, P. N.; Fort, E. F.; Keribar, R.

1984-01-01

Work done during phase 1 of a three-year program aimed at developing a comprehensive heat transfer and thermal analysis methodology oriented specifically to the design requirements of insulated diesel engines is reported. The technology developed in this program makes possible a quantitative analysis of the low heat rejection concept. The program is comprehensive in that it addresses all the heat transfer issues that are critical to the successful development of the low heat rejection diesel engine: (1) in-cylinder convective and radiative heat transfer; (2) cyclic transient heat transfer in thin solid layers at component surfaces adjacent to the combustion chamber; and (3) steady-state heat conduction in the overall engine structure. The Integral Technologies, Inc. (ITI) program is comprised of a set of integrated analytical and experimental tasks. A detailed review of the ITI program approach is provided, including the technical issues which underlie it and a summay of the methods that were developed.

Introduction to System Health Engineering and Management in Aerospace

NASA Technical Reports Server (NTRS)

Johnson, Stephen B.

2005-01-01

This paper provides a technical overview of Integrated System Health Engineering and Management (ISHEM). We define ISHEM as "the paper provides a techniques, and technologies used to design, analyze, build, verify, and operate a system to prevent faults and/or minimize their effects." This includes design and manufacturing techniques as well operational and managerial methods. ISHEM is not a "purely technical issue" as it also involves and must account for organizational, communicative, and cognitive f&ms of humans as social beings and as individuals. Thus the paper will discuss in more detail why all of these elements, h m the technical to the cognitive and social, are necessary to build dependable human-machine systems. The paper outlines a functional homework and architecture for ISHEM operations, describes the processes needed to implement ISHEM in the system life-cycle, and provides a theoretical framework to understand the relationship between the different aspects of the discipline. It then derives from these and the social and cognitive bases a set of design and operational principles for ISHEM.

ISU Team Project: An Integral View on Space Debris Mitigation and Removal

NASA Astrophysics Data System (ADS)

Maier, Philipp; Ricote Navarro, Carmon; Jehn, Rudiger; Gini, Andrea; Faure, Pauline; Adriaensen, Maarten; Datta, Iman; Hilbich, Daniel; Jacimovic, Aleksandar; Jacques, Lionel; Penent, Guilhem; Sinn, Thomas; Shioi, Hiroaki

2013-08-01

The issue of space debris poses challenges not only in technical, but also legal, political and economic dimensions. A sustainable solution needs to take into account all of them. This paper investigates such a potential solution in a multidisciplinary approach. To this end, it addresses the effectiveness of the existing debris mitigation guidelines, and identifies technical improvements for mitigation. It continues examining technical concepts for debris removal and performing proper cost-benefit trade-offs. The results of new simulations to assess the damage cost caused by space debris are presented. Based on these findings, an organizational framework and political recommendations are developed which will enable a sustainable use of space starting in 2020. The findings are compiled into a roadmap, which outlines 1) a path to the full adherence to debris mitigation guidelines and 2) the removal of ten large pieces of debris per year by a dedicated international organization, including expected expenditures necessary for its implementation.

Aligning Career and Technical Education

ERIC Educational Resources Information Center

Workman, Ed; Stubbs, Joyce

2011-01-01

The issues and concerns facing Kentucky Career and Technical Teacher Education (KY CTTE), university teacher educators and state department Career and Technical Education (CTE) leaders in providing and preparing the best CTE teachers possible are not unique to Kentucky. In an effort to better understand these issues and concerns a team of state…

The CHPRC Groundwater and Technical Integration Support (Master Project) Quality Assurance Management Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fix, N. J.

The scope of the CH2M Hill Plateau Remediation Company, LLC (CHPRC) Groundwater and Technical Integration Support (Master Project) is for Pacific Northwest National Laboratory staff to provide technical and integration support to CHPRC. This work includes conducting investigations at the 300-FF-5 Operable Unit and other groundwater operable units, and providing strategic integration, technical integration and assessments, remediation decision support, and science and technology. The projects under this Master Project will be defined and included within the Master Project throughout the fiscal year, and will be incorporated into the Master Project Plan. This Quality Assurance Management Plan provides the quality assurancemore » requirements and processes that will be followed by the CHPRC Groundwater and Technical Integration Support (Master Project) and all releases associated with the CHPRC Soil and Groundwater Remediation Project. The plan is designed to be used exclusively by project staff.« less

Does integration of HIV and sexual and reproductive health services improve technical efficiency in Kenya and Swaziland? An application of a two-stage semi parametric approach incorporating quality measures

PubMed Central

Obure, Carol Dayo; Jacobs, Rowena; Guinness, Lorna; Mayhew, Susannah; Vassall, Anna

2016-01-01

Theoretically, integration of vertically organized services is seen as an important approach to improving the efficiency of health service delivery. However, there is a dearth of evidence on the effect of integration on the technical efficiency of health service delivery. Furthermore, where technical efficiency has been assessed, there have been few attempts to incorporate quality measures within efficiency measurement models particularly in sub-Saharan African settings. This paper investigates the technical efficiency and the determinants of technical efficiency of integrated HIV and sexual and reproductive health (SRH) services using data collected from 40 health facilities in Kenya and Swaziland for 2008/2009 and 2010/2011. Incorporating a measure of quality, we estimate the technical efficiency of health facilities and explore the effect of integration and other environmental factors on technical efficiency using a two-stage semi-parametric double bootstrap approach. The empirical results reveal a high degree of inefficiency in the health facilities studied. The mean bias corrected technical efficiency scores taking quality into consideration varied between 22% and 65% depending on the data envelopment analysis (DEA) model specification. The number of additional HIV services in the maternal and child health unit, public ownership and facility type, have a positive and significant effect on technical efficiency. However, number of additional HIV and STI services provided in the same clinical room, proportion of clinical staff to overall staff, proportion of HIV services provided, and rural location had a negative and significant effect on technical efficiency. The low estimates of technical efficiency and mixed effects of the measures of integration on efficiency challenge the notion that integration of HIV and SRH services may substantially improve the technical efficiency of health facilities. The analysis of quality and efficiency as separate dimensions of performance suggest that efficiency may be achieved without sacrificing quality. PMID:26803655

Does integration of HIV and sexual and reproductive health services improve technical efficiency in Kenya and Swaziland? An application of a two-stage semi parametric approach incorporating quality measures.

PubMed

Obure, Carol Dayo; Jacobs, Rowena; Guinness, Lorna; Mayhew, Susannah; Vassall, Anna

2016-02-01

Theoretically, integration of vertically organized services is seen as an important approach to improving the efficiency of health service delivery. However, there is a dearth of evidence on the effect of integration on the technical efficiency of health service delivery. Furthermore, where technical efficiency has been assessed, there have been few attempts to incorporate quality measures within efficiency measurement models particularly in sub-Saharan African settings. This paper investigates the technical efficiency and the determinants of technical efficiency of integrated HIV and sexual and reproductive health (SRH) services using data collected from 40 health facilities in Kenya and Swaziland for 2008/2009 and 2010/2011. Incorporating a measure of quality, we estimate the technical efficiency of health facilities and explore the effect of integration and other environmental factors on technical efficiency using a two-stage semi-parametric double bootstrap approach. The empirical results reveal a high degree of inefficiency in the health facilities studied. The mean bias corrected technical efficiency scores taking quality into consideration varied between 22% and 65% depending on the data envelopment analysis (DEA) model specification. The number of additional HIV services in the maternal and child health unit, public ownership and facility type, have a positive and significant effect on technical efficiency. However, number of additional HIV and STI services provided in the same clinical room, proportion of clinical staff to overall staff, proportion of HIV services provided, and rural location had a negative and significant effect on technical efficiency. The low estimates of technical efficiency and mixed effects of the measures of integration on efficiency challenge the notion that integration of HIV and SRH services may substantially improve the technical efficiency of health facilities. The analysis of quality and efficiency as separate dimensions of performance suggest that efficiency may be achieved without sacrificing quality. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

The NASA "PERS" Program: Solid Polymer Electrolyte Development for Advanced Lithium-Based Batteries

NASA Technical Reports Server (NTRS)

Baldwin, Richard S.; Bennett, William R.

2007-01-01

In fiscal year 2000, The National Aeronautics and Space Administration (NASA) and the Air Force Research Laboratory (AFRL) established a collaborative effort to support the development of polymer-based, lithium-based cell chemistries and battery technologies to address the next generation of aerospace applications and mission needs. The ultimate objective of this development program, which was referred to as the Polymer Energy Rechargeable System (PERS), was to establish a world-class technology capability and U.S. leadership in polymer-based battery technology for aerospace applications. Programmatically, the PERS initiative exploited both interagency collaborations to address common technology and engineering issues and the active participation of academia and private industry. The initial program phases focused on R&D activities to address the critical technical issues and challenges at the cell level. Out of a total of 38 proposals received in response to a NASA Research Announcement (NRA) solicitation, 18 proposals (13 contracts and 5 grants) were selected for initial award to address these technical challenges. Brief summaries of technical approaches, results and accomplishments of the PERS Program development efforts are presented. With Agency support provided through FY 2004, the PERS Program efforts were concluded in 2005, as internal reorganizations and funding cuts resulted in shifting programmatic priorities within NASA. Technically, the PERS Program participants explored, to various degrees over the lifetime of the formal program, a variety of conceptual approaches for developing and demonstrating performance of a viable advanced solid polymer electrolyte possessing the desired attributes, as well as several participants addressing all components of an integrated cell configuration. Programmatically, the NASA PERS Program was very successful, even though the very challenging technical goals for achieving a viable solid polymer electrolyte material or the overall envisioned long-term, program objectives were not met due to funding reductions. The NASA PERS Program provided research opportunities and generated and disseminated a wealth of new scientific knowledge and technical competencies within the polymer electrolyte area.

Transmission Challenges and Best Practices for Cost-Effective Renewable Energy Delivery across State and Provincial Boundaries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Shengru; Hurlbut, David J.; Bird, Lori A.

A strategically planned transmission network is an important source of flexibility for the integration of large-scale renewable energy (RE). Such a network can offer access to a broad geographic diversity of resources, which can reduce flexibility needs and facilitate sharing between neighboring balancing areas. This report builds on two previous NREL technical reports - Advancing System Flexibility for High Penetration Renewable Integration (Milligan et al. 2015) and 'Renewables-Friendly' Grid Development Strategies (Hurlbut et al. 2015) - which discuss various flexibility options and provide an overview of U.S. market models and grid planning. This report focuses on addressing issues with cross-regional/provincialmore » transmission in China with the aim of integrating renewable resources that are concentrated in remote areas and require inter-regional/provincial power exchange.« less

Deployment Process, Mechanization, and Testing for the Mars Exploration Rovers

NASA Technical Reports Server (NTRS)

Iskenderian, Ted

2004-01-01

NASA's Mar Exploration Rover (MER) robotic prospectors were produced in an environment of unusually challenging schedule, volume, and mass restrictions. The technical challenges pushed the system s design towards extensive integration of function, which resulted in complex system engineering issues. One example of the system's integrated complexity can be found in the deployment process for the rover. Part of this process, rover "standup", is outlined in this paper. Particular attention is given to the Rover Lift Mechanism's (RLM) role and its design. Analysis methods are presented and compared to test results. It is shown that because prudent design principles were followed, a robust mechanism was created that minimized the duration of integration and test, and enabled recovery without perturbing related systems when reasonably foreseeable problems did occur. Examples of avoidable, unnecessary difficulty are also presented.

Linking and integrating computers for maternity care.

PubMed

Lumb, M; Fawdry, R

1990-12-01

Functionally separate computer systems have been developed for many different areas relevant to maternity care, e.g. maternity data collection, pathology and imaging reports, staff rostering, personnel, accounting, audit, primary care etc. Using land lines, modems and network gateways, many such quite distinct computer programs or databases can be made accessible from a single terminal. If computer systems are to attain their full potential for the improvement of the maternity care, there will be a need not only for terminal emulation but also for more complex integration. Major obstacles must be overcome before such integration is widely achieved. Technical and conceptual progress towards overcoming these problems is discussed, with particular reference to the OSI (open systems interconnection) initiative, to the Read clinical classification and to the MUMMIES CBS (Common Basic Specification) Maternity Care Project. The issue of confidentiality is also briefly explored.

Task toward a Realization of Commercial Tokamak Fusion Plants in 2050 -The Role of ITER and the Succeeding Developments- 4.Technology and Material Research in Fusion Power Plant Development

NASA Astrophysics Data System (ADS)

Akiba, Masato; Matsui, Hideki; Takatsu, Hideyuki; Konishi, Satoshi

Technical issues regarding the fusion power plant that are required to be developed in the period of ITER construction and operation, both with ITER and with other facilities that complement ITER are described in this section. Three major fields are considered to be important in fusion technology. Section 4.1 summarizes blanket study, and ITER Test Blanket Module (TBM) development that focuses its effort on the first generation power blanket to be installed in DEMO. ITER will be equipped with 6 TBMs which are developed under each party's fusion program. In Japan, the solid breeder using water as a coolant is the primary candidate, and He-cooled pebble bed is the alternative. Other liquid options such as LiPb, Li or molten salt are developed by other parties' initiatives. The Test Blanket Working Group (TBWG) is coordinating these efforts. Japanese universities are investigating advanced concepts and fundamental crosscutting technologies. Section 4.2 introduces material development and particularly, the international irradiation facility, IFMIF. Reduced activation ferritic/martensitic steels are identified as promising candidates for the structural material of the first generation fusion blanket, while and vanadium alloy and SiC/SiC composite are pursued as advanced options. The IFMIF is currently planning the next phase of joint activity, EVEDA (Engineering Validation and Engineering Design Activity) that encompasses construction. Material studies together with the ITER TBM will provide essential technical information for development of the fusion power plant. Other technical issues to be addressed regarding the first generation fusion power plant are summarized in section 4.3. Development of components for ITER made remarkable progress for the major essential technology also necessary for future fusion plants, however many still need further improvements toward power plant. Such areas includes; the divertor, plasma heating/current drive, magnets, tritium, and remote handling. There remain many other technical issues for power plant which require integrated efforts.

Operational Interventions to Maintenance Error

NASA Technical Reports Server (NTRS)

Kanki, Barbara G.; Walter, Diane; Dulchinos, VIcki

1997-01-01

A significant proportion of aviation accidents and incidents are known to be tied to human error. However, research of flight operational errors has shown that so-called pilot error often involves a variety of human factors issues and not a simple lack of individual technical skills. In aircraft maintenance operations, there is similar concern that maintenance errors which may lead to incidents and accidents are related to a large variety of human factors issues. Although maintenance error data and research are limited, industry initiatives involving human factors training in maintenance have become increasingly accepted as one type of maintenance error intervention. Conscientious efforts have been made in re-inventing the team7 concept for maintenance operations and in tailoring programs to fit the needs of technical opeRAtions. Nevertheless, there remains a dual challenge: 1) to develop human factors interventions which are directly supported by reliable human error data, and 2) to integrate human factors concepts into the procedures and practices of everyday technical tasks. In this paper, we describe several varieties of human factors interventions and focus on two specific alternatives which target problems related to procedures and practices; namely, 1) structured on-the-job training and 2) procedure re-design. We hope to demonstrate that the key to leveraging the impact of these solutions comes from focused interventions; that is, interventions which are derived from a clear understanding of specific maintenance errors, their operational context and human factors components.

Reduction of Maintenance Error Through Focused Interventions

NASA Technical Reports Server (NTRS)

Kanki, Barbara G.; Walter, Diane; Rosekind, Mark R. (Technical Monitor)

1997-01-01

It is well known that a significant proportion of aviation accidents and incidents are tied to human error. In flight operations, research of operational errors has shown that so-called "pilot error" often involves a variety of human factors issues and not a simple lack of individual technical skills. In aircraft maintenance operations, there is similar concern that maintenance errors which may lead to incidents and accidents are related to a large variety of human factors issues. Although maintenance error data and research are limited, industry initiatives involving human factors training in maintenance have become increasingly accepted as one type of maintenance error intervention. Conscientious efforts have been made in re-inventing the "team" concept for maintenance operations and in tailoring programs to fit the needs of technical operations. Nevertheless, there remains a dual challenge: to develop human factors interventions which are directly supported by reliable human error data, and to integrate human factors concepts into the procedures and practices of everyday technical tasks. In this paper, we describe several varieties of human factors interventions and focus on two specific alternatives which target problems related to procedures and practices; namely, 1) structured on-the-job training and 2) procedure re-design. We hope to demonstrate that the key to leveraging the impact of these solutions comes from focused interventions; that is, interventions which are derived from a clear understanding of specific maintenance errors, their operational context and human factors components.

75 FR 62534 - Reliability Monitoring, Enforcement and Compliance Issues; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-12

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. AD11-1-000] Reliability Monitoring, Enforcement and Compliance Issues; Notice of Technical Conference October 1, 2010. The Federal...-referenced proceeding to explore issues associated with reliability monitoring, enforcement and compliance...

A One System Integrated Approach to Simulant Selection for Hanford High Level Waste Mixing and Sampling Tests - 13342

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thien, Mike G.; Barnes, Steve M.

2013-07-01

The Hanford Tank Operations Contractor (TOC) and the Hanford Waste Treatment and Immobilization Plant (WTP) contractor are both engaged in demonstrating mixing, sampling, and transfer system capabilities using simulated Hanford High-Level Waste (HLW) formulations. This represents one of the largest remaining technical issues with the high-level waste treatment mission at Hanford. Previous testing has focused on very specific TOC or WTP test objectives and consequently the simulants were narrowly focused on those test needs. A key attribute in the Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 2010-2 is to ensure testing is performed with a simulant that represents the broadmore » spectrum of Hanford waste. The One System Integrated Project Team is a new joint TOC and WTP organization intended to ensure technical integration of specific TOC and WTP systems and testing. A new approach to simulant definition has been mutually developed that will meet both TOC and WTP test objectives for the delivery and receipt of HLW. The process used to identify critical simulant characteristics, incorporate lessons learned from previous testing, and identify specific simulant targets that ensure TOC and WTP testing addresses the broad spectrum of Hanford waste characteristics that are important to mixing, sampling, and transfer performance are described. (authors)« less

Integration of Cleaner Production and Waste Water Treatment on Tofu Small Industry for Biogas Production using AnSBR Reactor

NASA Astrophysics Data System (ADS)

Rahayu, Suparni Setyowati; Budiyono; Purwanto

2018-02-01

A research on developing a system that integrates clean production and waste water treatment for biogas production in tofu small industry has been conducted. In this research, tofu waste water was turned into biogas using an AnSBR reactor. Mud from the sewage system serves as the inoculums. This research involved: (1) workshop; (2) supervising; (3) technical meeting; (4) network meeting, and (5) technical application. Implementation of clean production integrated with waste water treatment reduced the amount of waste water to be treated in a treatment plant. This means less cost for construction and operation of waste water treatment plants, as inherent limitations associated with such plants like lack of fund, limited area, and technological issues are inevitable. Implementation of clean production prior to waste water treatment reduces pollution figures down to certain levels that limitations in waste water treatment plants can be covered. Results show that biogas in 16 days HRT in an AnSBR reactor contains CH4(78.26 %) and CO2 (20.16 %). Meanwhile, treatments using a conventional bio-digester result in biogas with 72.16 % CH4 and 18.12 % CO2. Hence, biogas efficiency for the AnSBR system is 2.14 times greater than that of a conventional bio-digester.

Integration of the virtual model of a Stewart platform with the avatar of a vehicle in a virtual reality

NASA Astrophysics Data System (ADS)

Herbuś, K.; Ociepka, P.

2016-08-01

The development of methods of computer aided design and engineering allows conducting virtual tests, among others concerning motion simulation of technical means. The paper presents a method of integrating an object in the form of a virtual model of a Stewart platform with an avatar of a vehicle moving in a virtual environment. The area of the problem includes issues related to the problem of fidelity of mapping the work of the analyzed technical mean. The main object of investigations is a 3D model of a Stewart platform, which is a subsystem of the simulator designated for driving learning for disabled persons. The analyzed model of the platform, prepared for motion simulation, was created in the “Motion Simulation” module of a CAD/CAE class system Siemens PLM NX. Whereas the virtual environment, in which the moves the avatar of the passenger car, was elaborated in a VR class system EON Studio. The element integrating both of the mentioned software environments is a developed application that reads information from the virtual reality (VR) concerning the current position of the car avatar. Then, basing on the accepted algorithm, it sends control signals to respective joints of the model of the Stewart platform (CAD).

Simulation-based ureteroscopy skills training curriculum with integration of technical and non-technical skills: a randomised controlled trial.

PubMed

Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; McIlhenny, Craig; Khan, Shahid; Raza, Syed Johar; Sahai, Arun; Brewin, James; Bello, Fernando; Kneebone, Roger; Khan, Muhammad Shamim; Dasgupta, Prokar; Ahmed, Kamran

2015-09-01

Current training modalities within ureteroscopy have been extensively validated and must now be integrated within a comprehensive curriculum. Additionally, non-technical skills often cause surgical error and little research has been conducted to combine this with technical skills teaching. This study therefore aimed to develop and validate a curriculum for semi-rigid ureteroscopy, integrating both technical and non-technical skills teaching within the programme. Delphi methodology was utilised for curriculum development and content validation, with a randomised trial then conducted (n = 32) for curriculum evaluation. The developed curriculum consisted of four modules; initially developing basic technical skills and subsequently integrating non-technical skills teaching. Sixteen participants underwent the simulation-based curriculum and were subsequently assessed, together with the control cohort (n = 16) within a full immersion environment. Both technical (Time to completion, OSATS and a task specific checklist) and non-technical (NOTSS) outcome measures were recorded with parametric and non-parametric analyses used depending on the distribution of our data as evaluated by a Shapiro-Wilk test. Improvements within the intervention cohort demonstrated educational value across all technical and non-technical parameters recorded, including time to completion (p < 0.01), OSATS scores (p < 0.001), task specific checklist scores (p = 0.011) and NOTSS scores (p < 0.001). Content validity, feasibility and acceptability were all demonstrated through curriculum development and post-study questionnaire results. The current developed curriculum demonstrates that integrating both technical and non-technical skills teaching is both educationally valuable and feasible. Additionally, the curriculum offers a validated simulation-based training modality within ureteroscopy and a framework for the development of other simulation-based programmes.

Simulated linear test applied to quantitative proteomics.

PubMed

Pham, T V; Jimenez, C R

2016-09-01

Omics studies aim to find significant changes due to biological or functional perturbation. However, gene and protein expression profiling experiments contain inherent technical variation. In discovery proteomics studies where the number of samples is typically small, technical variation plays an important role because it contributes considerably to the observed variation. Previous methods place both technical and biological variations in tightly integrated mathematical models that are difficult to adapt for different technological platforms. Our aim is to derive a statistical framework that allows the inclusion of a wide range of technical variability. We introduce a new method called the simulated linear test, or the s-test, that is easy to implement and easy to adapt for different models of technical variation. It generates virtual data points from the observed values according to a pre-defined technical distribution and subsequently employs linear modeling for significance analysis. We demonstrate the flexibility of the proposed approach by deriving a new significance test for quantitative discovery proteomics for which missing values have been a major issue for traditional methods such as the t-test. We evaluate the result on two label-free (phospho) proteomics datasets based on ion-intensity quantitation. Available at http://www.oncoproteomics.nl/software/stest.html : t.pham@vumc.nl. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Reaching a 1.5°C target: socio-technical challenges for a rapid transition to low-carbon electricity systems.

PubMed

Eyre, Nick; Darby, Sarah J; Grünewald, Philipp; McKenna, Eoghan; Ford, Rebecca

2018-05-13

A 1.5°C global average target implies that we should no longer focus on merely incremental emissions reductions from the electricity system, but rather on fundamentally re-envisaging a system that, sooner rather than later, becomes carbon free. Many low-carbon technologies are surpassing mainstream predictions for both uptake and cost reduction. Their deployment is beginning to be disruptive within established systems. 'Smart technologies' are being developed to address emerging challenges of system integration, but their rates of future deployment remain uncertain. We argue that transition towards a system that can fully displace carbon generation sources will require expanding the focus of our efforts beyond technical solutions. Recognizing that change has social and technical dimensions, and that these interact strongly, we set out a socio-technical review that covers electricity infrastructure, citizens, business models and governance. It describes some of the socio-technical challenges that need to be addressed for the successful transition of the existing electricity systems. We conclude that a socio-technical understanding of electricity system transitions offers new and better insights into the potential and challenges for rapid decarbonization.This article is part of the theme issue 'The Paris Agreement: understanding the physical and social challenges for a warming world of 1.5°C above pre-industrial levels'. © 2018 The Author(s).

Exploring the Benefits of Teacher-Modeling Strategies Integrated into Career and Technical Education

ERIC Educational Resources Information Center

Cathers, Thomas J., Sr.

2013-01-01

This case study examined how career and technical education classes function using multiple instructional modeling strategies integrated into vocational and technical training environments. Seven New Jersey public school technical teachers received an introductory overview of the investigation and participated by responding to 10 open-end…

Better informed in clinical practice - a brief overview of dental informatics.

PubMed

Reynolds, P A; Harper, J; Dunne, S

2008-03-22

Uptake of dental informatics has been hampered by technical and user issues. Innovative systems have been developed, but usability issues have affected many. Advances in technology and artificial intelligence are now producing clinically useful systems, although issues still remain with adapting computer interfaces to the dental practice working environment. A dental electronic health record has become a priority in many countries, including the UK. However, experience shows that any dental electronic health record (EHR) system cannot be subordinate to, or a subset of, a medical record. Such a future dental EHR is likely to incorporate integrated care pathways. Future best dental practice will increasingly depend on computer-based support tools, although disagreement remains about the effectiveness of current support tools. Over the longer term, future dental informatics tools will incorporate dynamic, online evidence-based medicine (EBM) tools, and promise more adaptive, patient-focused and efficient dental care with educational advantages in training.

Socio-Technical Considerations for the Use of Blockchain Technology in Healthcare.

PubMed

Wong, Ming Chao; Yee, Kwang Chien; Nøhr, Christian

2018-01-01

Blockchain technology is often considered as the fourth industrial revolution that will change the world. The enthusiasm of the transformative nature of blockchain technology has infiltrated healthcare. Blockchain is often seen as the much needed and perfect technology for healthcare, addressing the difficult and complex issues of security and inter-operability. More importantly, the "value" and trust-based system can deliver automated action and response via its smart contract mechanism. Healthcare, however, is a complex system. Health information technology (HIT) so far, has not delivered its promise of transforming healthcare due to its complex socio-technical and context sensitive interaction. The introduction of blockchain technology will need to consider a whole range of socio-technical issues in order to improve the quality and safety of patient care. This paper presents a discussion on these socio-technical issues. More importantly, this paper argues that in order to achieve the best outcome from blockchain technology, there is a need to consider a clinical transformation from "information" to "value " and trust. This paper argues that urgent research is needed to address these socio-technical issues in order to facilitate best outcomes for blockchain in healthcare. These socio-technical issues must then be further evaluated by means of working prototypes in the medical domain in coming years.

Project Interface Requirements Process Including Shuttle Lessons Learned

NASA Technical Reports Server (NTRS)

Bauch, Garland T.

2010-01-01

Most failures occur at interfaces between organizations and hardware. Processing interface requirements at the start of a project life cycle will reduce the likelihood of costly interface changes/failures later. This can be done by adding Interface Control Documents (ICDs) to the Project top level drawing tree, providing technical direction to the Projects for interface requirements, and by funding the interface requirements function directly from the Project Manager's office. The interface requirements function within the Project Systems Engineering and Integration (SE&I) Office would work in-line with the project element design engineers early in the life cycle to enhance communications and negotiate technical issues between the elements. This function would work as the technical arm of the Project Manager to help ensure that the Project cost, schedule, and risk objectives can be met during the Life Cycle. Some ICD Lessons Learned during the Space Shuttle Program (SSP) Life Cycle will include the use of hardware interface photos in the ICD, progressive life cycle design certification by analysis, test, & operations experience, assigning interface design engineers to Element Interface (EI) and Project technical panels, and linking interface design drawings with project build drawings

Integrated Requirements Analysis and Technology Roadmaps

NASA Technical Reports Server (NTRS)

1997-01-01

In fiscal year 1997, Strategic Insight performed analytical studies for NASA's Highly Reusable Space Transportation (HRST) program, creating program documents which illuminated technical requirements and critical research opportunities. Studies were performed to structure and confirm HRST's evolving technical requirements, building on Marshall's Phase 1 work, which defined HRST system concepts, analytical tools and high-level issues for assessment in Phase 2. Specifically, Strategic Insight: (1) Performed a requirements analysis to update HRST: An Advanced Concepts Study, Study Guidelines, Version 2.0 of January 22, 1996; only minor changes were recommended for the given parameters of interest to concept designers; (2) Conducted mini-workshops during HRST Working Group meetings on April 14-15, 1997 and July 22-24, 1997; and (3) Created structures for technology road maps of candidate HRST concepts, both subsystem and end-to-end concepts, emerging from the 13 cooperative agreement projects.

High Efficiency Space Power Systems Project Advanced Space-Rated Batteries

NASA Technical Reports Server (NTRS)

Reid, Concha M.

2011-01-01

Case Western Reserve University (CWRU) has an agreement with China National Offshore Oil Corporation New Energy Investment Company, Ltd. (CNOOC), under the United States-China EcoPartnerships Framework, to create a bi-national entity seeking to develop technically feasible and economically viable solutions to energy and environmental issues. Advanced batteries have been identified as one of the initial areas targeted for collaborations. CWRU invited NASA Glenn Research Center (GRC) personnel from the Electrochemistry Branch to CWRU to discuss various aspects of advanced battery development as they might apply to this partnership. Topics discussed included: the process for the selection of a battery chemistry; the establishment of an integrated development program; project management/technical interactions; new technology developments; and synergies between batteries for automotive and space operations. Additional collaborations between CWRU and NASA GRC's Electrochemistry Branch were also discussed.

The philosophy of benchmark testing a standards-based picture archiving and communications system.

PubMed

Richardson, N E; Thomas, J A; Lyche, D K; Romlein, J; Norton, G S; Dolecek, Q E

1999-05-01

The Department of Defense issued its requirements for a Digital Imaging Network-Picture Archiving and Communications System (DIN-PACS) in a Request for Proposals (RFP) to industry in January 1997, with subsequent contracts being awarded in November 1997 to the Agfa Division of Bayer and IBM Global Government Industry. The Government's technical evaluation process consisted of evaluating a written technical proposal as well as conducting a benchmark test of each proposed system at the vendor's test facility. The purpose of benchmark testing was to evaluate the performance of the fully integrated system in a simulated operational environment. The benchmark test procedures and test equipment were developed through a joint effort between the Government, academic institutions, and private consultants. Herein the authors discuss the resources required and the methods used to benchmark test a standards-based PACS.

Biology, ecology, and social aspects of wild edible mushrooms in the forests of the Pacific northwest: A preface to managing commercial harvest. Forest Service general technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Molina, R.; O'Dell, T.; Luoma, D.

1993-02-01

The commercial harvest of edible, forest fungi has a multimillion dollar industry with several thousand tons harvested annually. The primary objectives of the overview paper are to provide information on the biology of forest fungi, describe the major edible fungi harvested in the Pacific Northwest, integrate a perspective on the social aspects of the mushroom harvest issue, summarize the development of the commercial mushroom industry, and suggest research and monitoring protocols for developing management guidelines.

NASP X-30 Propulsion technology status

NASA Technical Reports Server (NTRS)

Powell, William E.

1992-01-01

The performance goals of the NASP program require an aero-propulsion system with a high effective specific impulse. In order to achieve these goals, the high potential performance of air-breathing engines must be achieved over a very wide Mach number operating range. This, in turn, demands high component performance and involves many important technical issues which must be resolved. Scramjet Propulsion Technology is divided into five major areas: (1) inlets, (2) combustors, (3) nozzles, (4) component integration, and (5) test facilities. A status report covering the five areas is presented.

Investigating Technical and Pedagogical Usability Issues of Collaborative Learning with Wikis

ERIC Educational Resources Information Center

Hadjerrouit, Said

2012-01-01

Wikis have been recently promoted as tools that foster collaborative learning. However, there has been little research devoted to the criteria that are suitable to address issues pertinent to collaborative learning. This paper proposes a set of criteria to explore technical and pedagogical usability issues of collaborative learning with wikis. The…

Report number codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, R.N.

This publication lists all report number codes processed by the Office of Scientific and Technical Information. The report codes are substantially based on the American National Standards Institute, Standard Technical Report Number (STRN)-Format and Creation Z39.23-1983. The Standard Technical Report Number (STRN) provides one of the primary methods of identifying a specific technical report. The STRN consists of two parts: The report code and the sequential number. The report code identifies the issuing organization, a specific program, or a type of document. The sequential number, which is assigned in sequence by each report issuing entity, is not included in thismore » publication. Part I of this compilation is alphabetized by report codes followed by issuing installations. Part II lists the issuing organization followed by the assigned report code(s). In both Parts I and II, the names of issuing organizations appear for the most part in the form used at the time the reports were issued. However, for some of the more prolific installations which have had name changes, all entries have been merged under the current name.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gauglitz, Phillip A.; Bontha, Jagannadha R.; Daniel, Richard C.

The Hanford Waste Treatment and Immobilization Plant (WTP) is currently being designed and constructed to pretreat and vitrify a large portion of the waste in the 177 underground waste storage tanks at the Hanford Site. A number of technical issues related to the design of the pretreatment facility (PTF) of the WTP have been identified. These issues must be resolved prior to the U.S. Department of Energy (DOE) Office of River Protection (ORP) reaching a decision to proceed with engineering, procurement, and construction activities for the PTF. One of the issues is Technical Issue T1 - Hydrogen Gas Release frommore » Vessels (hereafter referred to as T1). The focus of T1 is identifying controls for hydrogen release and completing any testing required to close the technical issue. In advance of selecting specific controls for hydrogen gas safety, a number of preliminary technical studies were initiated to support anticipated future testing and to improve the understanding of hydrogen gas generation, retention, and release within PTF vessels. These activities supported the development of a plan defining an overall strategy and approach for addressing T1 and achieving technical endpoints identified for T1. Preliminary studies also supported the development of a test plan for conducting testing and analysis to support closing T1. Both of these plans were developed in advance of selecting specific controls, and in the course of working on T1 it was decided that the testing and analysis identified in the test plan were not immediately needed. However, planning activities and preliminary studies led to significant technical progress in a number of areas. This report summarizes the progress to date from the preliminary technical studies. The technical results in this report should not be used for WTP design or safety and hazards analyses and technical results are marked with the following statement: “Preliminary Technical Results for Planning – Not to be used for WTP Design or Safety Analyses.”« less

Network Computing Infrastructure to Share Tools and Data in Global Nuclear Energy Partnership

NASA Astrophysics Data System (ADS)

Kim, Guehee; Suzuki, Yoshio; Teshima, Naoya

CCSE/JAEA (Center for Computational Science and e-Systems/Japan Atomic Energy Agency) integrated a prototype system of a network computing infrastructure for sharing tools and data to support the U.S. and Japan collaboration in GNEP (Global Nuclear Energy Partnership). We focused on three technical issues to apply our information process infrastructure, which are accessibility, security, and usability. In designing the prototype system, we integrated and improved both network and Web technologies. For the accessibility issue, we adopted SSL-VPN (Security Socket Layer-Virtual Private Network) technology for the access beyond firewalls. For the security issue, we developed an authentication gateway based on the PKI (Public Key Infrastructure) authentication mechanism to strengthen the security. Also, we set fine access control policy to shared tools and data and used shared key based encryption method to protect tools and data against leakage to third parties. For the usability issue, we chose Web browsers as user interface and developed Web application to provide functions to support sharing tools and data. By using WebDAV (Web-based Distributed Authoring and Versioning) function, users can manipulate shared tools and data through the Windows-like folder environment. We implemented the prototype system in Grid infrastructure for atomic energy research: AEGIS (Atomic Energy Grid Infrastructure) developed by CCSE/JAEA. The prototype system was applied for the trial use in the first period of GNEP.

Understanding public perceptions of biotechnology through the "Integrative Worldview Framework".

PubMed

De Witt, Annick; Osseweijer, Patricia; Pierce, Robin

2015-07-03

Biotechnological innovations prompt a range of societal responses that demand understanding. Research has shown such responses are shaped by individuals' cultural worldviews. We aim to demonstrate how the Integrative Worldview Framework (IWF) can be used for analyzing perceptions of biotechnology, by reviewing (1) research on public perceptions of biotechnology and (2) analyses of the stakeholder-debate on the bio-based economy, using the Integrative Worldview Framework (IWF) as analytical lens. This framework operationalizes the concept of worldview and distinguishes between traditional, modern, and postmodern worldviews, among others. Applied to these literatures, this framework illuminates how these worldviews underlie major societal responses, thereby providing a unifying understanding of the literature on perceptions of biotechnology. We conclude the IWF has relevance for informing research on perceptions of socio-technical changes, generating insight into the paradigmatic gaps in social science, and facilitating reflexive and inclusive policy-making and debates on these timely issues. © The Author(s) 2015.

Discovering the nature of advanced nursing practice in high dependency care: a critical care nurse consultant's experience.

PubMed

Fairley, Debra

2005-06-01

This paper describes how a critical care nurse consultant's clinical role has evolved within a surgical high dependency unit (SHDU) in a large teaching hospitals trust. In order to provide some background to role development, an overview of the research exploring the nature of advanced nursing practice in the context of critical care will be presented. From the outset, advanced nursing practice was not perceived as the acquisition and application of technical procedures usually undertaken by doctors, but possibly an integration of medicine and nursing where holistic nursing assessment is combined with symptom-focused physical examination. A reflective account of practical problems encountered relating to role integration, professional autonomy, legal and consent issues, non-medical prescribing, and role evaluation will be presented. A model of working that can be applied to high dependency units, integrating the role of the advanced nurse practitioner within the clinical team, will be described.

Telematic integration of health data: a practicable contribution.

PubMed

Guerriero, Lorenzo; Ferdeghini, Ezio M; Viola, Silvia R; Porro, Ivan; Testi, Angela; Bedini, Remo

2011-09-01

The patients' clinical and healthcare data should virtually be available everywhere, both to provide a more efficient and effective medical approach to their pathologies, as well as to make public healthcare decision makers able to verify the efficacy and efficiency of the adopted healthcare processes. Unfortunately, customised solutions adopted by many local Health Information Systems in Italy make it difficult to share the stored data outside their own environment. In the last years, worldwide initiatives have aimed to overcome such sharing limitation. An important issue during the passage towards standardised, integrated information systems is the possible loss of previously collected data. The herein presented project realises a suitable architecture able to guarantee reliable, automatic, user-transparent storing and retrieval of information from both modern and legacy systems. The technical and management solutions provided by the project avoid data loss and overlapping, and allow data integration and organisation suitable for data-mining and data-warehousing analysis.

The Energy-Water-Food Nexus.

PubMed

Keairns, D L; Darton, R C; Irabien, A

2016-06-07

As the global population grows in size and increasingly lives in cities, and with lifestyles based on greater material consumption, more attention is being given to the integrated system that supplies our energy, water, and food, the Nexus. There is also mounting concern about effects on the Nexus of climate change and damage to the natural environment that provides essential ecosystem services. Nexus analysis applies existing techniques, such as computational modelling and Life Cycle Assessment, but new frameworks and tools are needed, including those that will integrate societal and technical dimensions. Case studies show the vital role played by stakeholder involvement in clarifying issues, priorities, and values. They also demonstrate the importance of an integrated systems view of the complex interrelationships of the Nexus when planning effective remedies. Assessments conclude that transformative social and political change is needed to create new structures, markets, and governance to deal with the Nexus if we are to meet agreed-upon sustainable development goals.

The real world and lunar base activation scenarios

NASA Technical Reports Server (NTRS)

Schmitt, Harrison H.

1992-01-01

A lunar base or a network of lunar bases may have highly desirable support functions in a national or international program to explore and settle Mars. In addition, He-3 exported from the Moon could be the basis for providing much of the energy needs of humankind in the twenty-first century. Both technical and managerial issues must be addressed when considering the establishment of a lunar base that can serve the needs of human civilization in space. Many of the technical issues become evident in the consideration of hypothetical scenarios for the activation of a network of lunar bases. Specific and realistic assumptions must be made about the conduct of various types of activities in addition to the general assumptions given above. These activities include landings, crew consumables, power production, crew selection, risk management, habitation, science station placement, base planning, science, agriculture, resource evaluation, readaptation, plant activation and test, storage module landings, resource transport module landings, integrated operations, maintenance, Base 2 activation, and management. The development of scenarios for the activation of a lunar base or network of bases will require close attention to the 'real world' of space operations. That world is defined by the natural environment, available technology, realistic objectives, and common sense.

Biomimetics in the design of a robotic exoskeleton for upper limb therapy

NASA Astrophysics Data System (ADS)

Baniqued, Paul Dominick E.; Dungao, Jade R.; Manguerra, Michael V.; Baldovino, Renann G.; Abad, Alexander C.; Bugtai, Nilo T.

2018-02-01

Current methodologies in designing robotic exoskeletons for upper limb therapy simplify the complex requirements of the human anatomy. As a result, such devices tend to compromise safety and biocompatibility with the intended user. However, a new design methodology uses biological analogues as inspiration to address these technical issues. This approach follows that of biomimetics, a design principle that uses the extraction and transfer of useful information from natural morphologies and processes to solve technical design issues. In this study, a biomimetic approach in the design of a 5-degree-of-freedom robotic exoskeleton for upper limb therapy was performed. A review of biomimetics was first discussed along with its current contribution to the design of rehabilitation robots. With a proposed methodological framework, the design for an upper limb robotic exoskeleton was generated using CATIA software. The design was inspired by the morphology of the bones and the muscle force transmission of the upper limbs. Finally, a full design assembly presented had integrated features extracted from the biological analogue. The successful execution of a biomimetic design methodology made a case in providing safer and more biocompatible robots for rehabilitation.

Managing troubled data: Coastal data partnerships smooth data integration

USGS Publications Warehouse

Hale, S.S.; Hale, Miglarese A.; Bradley, M.P.; Belton, T.J.; Cooper, L.D.; Frame, M.T.; Friel, C.A.; Harwell, L.M.; King, R.E.; Michener, W.K.; Nicolson, D.T.; Peterjohn, B.G.

2003-01-01

Understanding the ecology, condition, and changes of coastal areas requires data from many sources. Broad-scale and long-term ecological questions, such as global climate change, biodiversity, and cumulative impacts of human activities, must be addressed with databases that integrate data from several different research and monitoring programs. Various barriers, including widely differing data formats, codes, directories, systems, and metadata used by individual programs, make such integration troublesome. Coastal data partnerships, by helping overcome technical, social, and organizational barriers, can lead to a better understanding of environmental issues, and may enable better management decisions. Characteristics of successful data partnerships include a common need for shared data, strong collaborative leadership, committed partners willing to invest in the partnership, and clear agreements on data standards and data policy. Emerging data and metadata standards that become widely accepted are crucial. New information technology is making it easier to exchange and integrate data. Data partnerships allow us to create broader databases than would be possible for any one organization to create by itself.

Managing troubled data: coastal data partnerships smooth data integration.

PubMed

Hale, Stephen S; Miglarese, Anne Hale; Bradley, M Patricia; Belton, Thomas J; Cooper, Larry D; Frame, Michael T; Friel, Christopher A; Harwell, Linda M; King, Robert E; Michener, William K; Nicolson, David T; Peterjohn, Bruce G

2003-01-01

Understanding the ecology, condition, and changes of coastal areas requires data from many sources. Broad-scale and long-term ecological questions, such as global climate change, biodiversity, and cumulative impacts of human activities, must be addressed with databases that integrate data from several different research and monitoring programs. Various barriers, including widely differing data formats, codes, directories, systems, and metadata used by individual programs, make such integration troublesome. Coastal data partnerships, by helping overcome technical, social, and organizational barriers, can lead to a better understanding of environmental issues, and may enable better management decisions. Characteristics of successful data partnerships include a common need for shared data, strong collaborative leadership, committed partners willing to invest in the partnership, and clear agreements on data standards and data policy. Emerging data and metadata standards that become widely accepted are crucial. New information technology is making it easier to exchange and integrate data. Data partnerships allow us to create broader databases than would be possible for any one organization to create by itself.

SU-E-CAMPUS-J-04: Image Guided Radiation Therapy (IGRT): Review of Technical Standards and Credentialing in Radiotherapy Clinical Trials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giaddui, T; Chen, W; Yu, J

2014-06-15

Purpose: To review IGRT credentialing experience and unexpected technical issues encountered in connection with advanced radiotherapy technologies as implemented in RTOG clinical trials. To update IGRT credentialing procedures with the aim of improving the quality of the process, and to increase the proportion of IGRT credentialing compliance. To develop a living disease site-specific IGRT encyclopedia. Methods: Numerous technical issues were encountered during the IGRT credentialing process. The criteria used for credentialing review were based on: image quality; anatomy included in fused data sets and shift results. Credentialing requirements have been updated according to the AAPM task group reports for IGRTmore » to ensure that all required technical items are included in the quality review process. Implementation instructions have been updated and expanded for recent protocols. Results: Technical issues observed during the credentialing review process include, but are not limited to: poor quality images; inadequate image acquisition region; poor data quality; shifts larger than acceptable; no soft tissue surrogate. The updated IGRT credentialing process will address these issues and will also include the technical items required from AAPM: TG 104; TG 142 and TG 179 reports. An instruction manual has been developed describing a remote credentialing method for reviewers. Submission requirements are updated, including images/documents as well as facility questionnaire. The review report now includes summary of the review process and the parameters that reviewers check. We have reached consensus on the minimum IGRT technical requirement for a number of disease sites. RTOG 1311(NRG-BR002A Phase 1 Study of Stereotactic Body Radiotherapy (SBRT) for the Treatment of Multiple Metastases) is an example, here; the protocol specified the minimum requirement for each anatomical sites (with/without fiducials). Conclusion: Technical issues are identified and reported. IGRT guidelines are updated, with the corresponding credentialing requirements. An IGRT encyclopedia describing site-specific implementation issues is currently in development.« less

Wind-To-Hydrogen Project: Electrolyzer Capital Cost Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saur, G.

This study is being performed as part of the U.S. Department of Energy and Xcel Energy's Wind-to-Hydrogen Project (Wind2H2) at the National Renewable Energy Laboratory. The general aim of the project is to identify areas for improving the production of hydrogen from renewable energy sources. These areas include both technical development and cost analysis of systems that convert renewable energy to hydrogen via water electrolysis. Increased efficiency and reduced cost will bring about greater market penetration for hydrogen production and application. There are different issues for isolated versus grid-connected systems, however, and these issues must be considered. The manner inmore » which hydrogen production is integrated in the larger energy system will determine its cost feasibility and energy efficiency.« less

Integrated Data Collection Analysis (IDCA) Program — IDCA Quarterly Program Review, September 14 and 15, 2010

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sandstrom, Mary M.; Brown, Geoffrey W.; Warner, Kirstin F.

The IDCA conducted a program review at Los Alamos National Laboratory, September 14 and 15, 2010. The review was divided into three parts: 1) an update on the current status of the program, 2) an information exchange and discussion on technical details for current issues and future planning, and 3) a tour of the SSST testing facilities at LANL. The meeting started with an update from DHS by Laura Parker and a restating of some of the objectives of the Proficiency Test of which the IDCA is currently engaged. This update was followed by a discussion of some high levelmore » programmatic issues particularly about ways of communicating the overall goals of the IDCA to non-technical representatives. The final topic focused on the difficulty of releasing information, including the DHS approval process, ITAR, and open publication. Next JGR presented a technical summary of accomplishments, schedule, milestones, and future directions. These key points made were: 1) about 1/3 of the materials have been tested, 2) some participants are behind others causing a lag in report writing, 3) method reports have been assigned to various participants to speed up the process of reporting, 4) the SSST Compendium needs reformatting and restructuring, and 5) the Compendium needs a web site to house with access control. After the technical update, some of the Proficiency Test results were shown comparing data from the various laboratories. These results included comparisons of the RDX standard, KC/sugar mixtures (-100 mesh and as received), KC/dodecane, KP/Al, and KP/C. Impact, friction, ESD, and DSC results were the focus. All the participants were involved in these discussions. This report includes summary notes, presentations, and explanatory information.« less

Integral Engine Inlet Particle Separator. Volume 2. Design Guide

DTIC Science & Technology

1975-08-01

herein will be used in the design of integral inlet particle separators for future Army aircraft gas turbine engines . Apprupriate technical personnel...OF INTEGRAL GAS TURBINE ENGINE SOLID PARTICLE INLET SEPARATORS, PHASE I, FEASIBILITY STUDY AND DESIGN, Pratt and Whitney Aircraft ; USAAVLABS Technical...USAAVLABS Technical Report 70-36, U.S. Army Aviation Materiel Laboratories, Fort Eustis, Virginia, August 1970 AD 876 584. 13. ENGINES , AIRCRAFT

Engineering Forum Issue Paper: Online Hazardous Waste Cleanup Technical Resources

EPA Pesticide Factsheets

This issue paper is intended to give the reader examples of some online technical resources that can assist with hazardous waste cleanups in the Superfund, Resource Conservation and Recovery Act (RCRA), and Brownfields programs.

Advances in health informatics education: educating students at the intersection of health care and information technology.

PubMed

Kushniruk, Andre; Borycki, Elizabeth; Armstrong, Brian; Kuo, Mu-Hsing

2012-01-01

The paper describes the authors' work in the area of health informatics (HI) education involving emerging health information technologies. A range of information technologies promise to modernize health care. Foremost among these are electronic health records (EHRs), which are expected to significantly improve and streamline health care practice. Major national and international efforts are currently underway to increase EHR adoption. However, there have been numerous issues affecting the widespread use of such information technology, ranging from a complex array of technical problems to social issues. This paper describes work in the integration of information technologies directly into the education and training of HI students at both the undergraduate and graduate level. This has included work in (a) the development of Web-based computer tools and platforms to allow students to have hands-on access to the latest technologies and (b) development of interdisciplinary educational models that can be used to guide integrating information technologies into HI education. The paper describes approaches that allow for remote hands-on access by HI students to a range of EHRs and related technology. To date, this work has been applied in HI education in a variety of ways. Several approaches for integration of this essential technology into HI education and training are discussed, along with future directions for the integration of EHR technology into improving and informing the education of future health and HI professionals.

ProFUSO: Business process and ontology-based framework to develop ubiquitous computing support systems for chronic patients' management.

PubMed

Jimenez-Molina, Angel; Gaete-Villegas, Jorge; Fuentes, Javier

2018-06-01

New advances in telemedicine, ubiquitous computing, and artificial intelligence have supported the emergence of more advanced applications and support systems for chronic patients. This trend addresses the important problem of chronic illnesses, highlighted by multiple international organizations as a core issue in future healthcare. Despite the myriad of exciting new developments, each application and system is designed and implemented for specific purposes and lacks the flexibility to support different healthcare concerns. Some of the known problems of such developments are the integration issues between applications and existing healthcare systems, the reusability of technical knowledge in the creation of new and more sophisticated systems and the usage of data gathered from multiple sources in the generation of new knowledge. This paper proposes a framework for the development of chronic disease support systems and applications as an answer to these shortcomings. Through this framework our pursuit is to create a common ground methodology upon which new developments can be created and easily integrated to provide better support to chronic patients, medical staff and other relevant participants. General requirements are inferred for any support system from the primary attention process of chronic patients by the Business Process Management Notation. Numerous technical approaches are proposed to design a general architecture that considers the medical organizational requirements in the treatment of a patient. A framework is presented for any application in support of chronic patients and evaluated by a case study to test the applicability and pertinence of the solution. Copyright © 2018 Elsevier Inc. All rights reserved.

Improving integration and coordination of funding, technical assistance, and reporting/data collection: recommendations from CDC and USAPI stakeholders.

PubMed

Ka'opua, Lana Sue I; White, Susan F; Rochester, Phyllis F; Holden, Debra J

2010-09-01

Current US Federal funding mechanisms may foster program silos that disable sharing of resources and information across programs within a larger system of public health services. Such silos present challenges to USAPI communities where human resources, health infrastructure, and health financing are limited. Integrative and coordinated approaches have been recommended. The CDC Pacific Islands Integration and Coordination project was initiated by the Division of Cancer Prevention and Control (DCPC). Its project aim was to identify ways for the CDC to collaborate with the USAPI in improving CDC activities and processes related to chronic disease. This article focuses on recommendations for improving coordination and integration in three core areas of health services programming: funding, program reporting/data collection and analysis, and technical assistance. Preliminary information on challenges and issues relevant to the core areas was gathered through site visits, focus groups, key informant interviews, and other sources. This information was used by stakeholder groups from the CDC and the USAPI to develop recommendations in the core programming areas. Recommendations generated at the CDC and USAPI stakeholder meetings were prepared into a single set of recommendations and stakeholders reviewed the document for accuracy prior to its dissemination to CDC's National Center for Chronic Disease Prevention and Health Promotion programs management and staff. Key recommendations, include: (1) consideration of resource s and other challenges unique to the USAPI when reviewing funding applications, (2) consideration of ways to increase flexibility in USAPI use of program funds, (3) dedicate funding and human resources for technical assistance, (4) provide opportunities for capacity-building across programs and jurisdictions, (5) consider ways to more directly link program reporting with technical assistance. This project provided a unique opportunity for CDC and USAPI stakeholders to share diverse perspectives on challenges to public health programs in the USAPI. Despite diverse experiences, the final set of recommendations reflected a high level of concordance between USAPI and CDC stakeholders on ways to improve coordination and integration of CDC processes and activities in the three core areas. Recommendations have informed some actions already initiated by the DCPC, including the dedication of funds for leadership institutes aimed at enhancing USAPI capacity for sustainable, integrated regional and jurisdictional cancer control infrastructure. Such efforts are an important beginning, but more remains to be done. Indicated is the need for continuous dialogue and collaboration. While this project focused on the USAPI, our results may be relevant to those interested in inter-organizational collaborations, medically underserved areas, public health services programs, and community-based participatory approaches.

Multidisciplinary study on anthropogenic landslides in Nepal

NASA Astrophysics Data System (ADS)

Puglia, Christopher; Derron, Marc-Henri; Nicolet, Pierrick; Sudmeier-Rieux, Karen; Jaboyedoff, Michel; Devkota, Sanjay

2013-04-01

Nepal is a country in which shallow landslide is a frequent phenomenon. Monsoon is the main triggering factor but anthropogenic influence is often significant too. Indeed, many infrastructures, such as roads or water pipes, are not built in a rigorous way because of a lack of funds and knowledge. In the present study we examine the technical, social and economic issues of landslide management for two sites in Nepal. The first site is located in Sanusiruwari VDC (Sindhupalchock district, central Nepal) and the second one in Namadi VDC (Ramecchap district, central Nepal). Both sites are affected by landslides induced by the construction of hydropower plants. These landslides may threaten the viability of the hydropower plants. At both sites the problems are quite similar, but the first site project is a private one and the second one is a public one implemented by the United Nations Development Programme (UNDP). For both sites, bioengineering methods using Vetiver (Vetyveria zizanioides) plantations is the main stabilization measure. To follow the progression of both landslides, fieldwork observations were conducted before and after the 2012 rainy season, including photogrammetric and distancemeter acquisitions. Main issues were discussed with communities and stakeholders of the hydropower projects through interviews and participatory risk mapping. Main issues include: lack of communication between the project managers and communities leading to conflict and the lack of maintenance of the bio-engineering sites, leading to less effective Vetiver growth and slope stabilization. Comparing the landslide management (technical, social and economic) of the two projects allows to point out some specific issues within an integrated risk perspective.

The importance of teaching communication in dental education. A survey amongst dentists, students and patients.

PubMed

Woelber, J P; Deimling, D; Langenbach, D; Ratka-Krüger, P

2012-02-01

The aim of our study was to evaluate the subjective importance of teaching communication in the dental curriculum by conducting a survey amongst dentists, students and patients. Three questionnaires about communication-related issues were developed in which different questions could be rated on a five-point Likert scale. These questions included the subjective importance of the dental team's friendliness, an elaborated consultation, modern office equipment or the dentist's technical skills. Seven hundred and twenty-nine questionnaires were completed [233 by dentists (32%), 310 by students (43%) and 185 by patients (25%)]. Eighty-seven percentage of the dentists, 84% of the students and 84% of the patients supported an integration of communicational issues in dental education; 94.7% of the dentists and 77.2% of the patients attached vital importance to the dentist-patient relationship regarding the therapeutic outcomes. Dentists with prior communicational training experience would spend significantly (P<0.001) more money for further courses. The results show the publicly perceived importance of integrating aspects of communication in dental education. © 2011 John Wiley & Sons A/S.

Non-nuclear Testing of Reactor Systems in the Early Flight Fission Test Facilities (EFF-TF)

NASA Technical Reports Server (NTRS)

VanDyke, Melissa; Martin, James

2004-01-01

The Early Flight Fission-Test Facility (EFF-TF) can assist in the &sign and development of systems through highly effective non-nuclear testing of nuclear systems when technical issues associated with near-term space fission systems are "non-nuclear" in nature (e.g. system s nuclear operations are understood). For many systems. thermal simulators can he used to closely mimic fission heat deposition. Axial power profile, radial power profile. and fuel pin thermal conductivity can be matched. In addition to component and subsystem testing, operational and lifetime issues associated with the steady state and transient performance of the integrated reactor module can be investigated. Instrumentation at the EFF-TF allows accurate measurement of temperature, pressure, strain, and bulk core deformation (useful for accurately simulating nuclear behavior). Ongoing research at the EFF-TF is geared towards facilitating research, development, system integration, and system utilization via cooperative efforts with DOE laboratories, industry, universities, and other NASA centers. This paper describes the current efforts for the latter portion of 2003 and beginning of 2004.

The use of virtual communities of practice to improve interprofessional collaboration and education: findings from an integrated review.

PubMed

McLoughlin, Clodagh; Patel, Kunal D; O'Callaghan, Tom; Reeves, Scott

2018-03-01

The recent growth in online technology has led to a rapid increase in the sharing of health related information globally. Health and social care professionals are now using a wide range of virtual communities of practice (VCoPs) for learning, support, continuing professional education, knowledge management and information sharing. In this article, we report the findings from a review of the literature that explored the use of VCoPs by health and social care professionals to determine their potential for interprofessional education and collaboration. We employed integrated review methods to search and identify relevant VCoP articles. We undertook searches of PubMed and Google Scholar from 2000, which after screening, resulted in the inclusion of 19 articles. A thematic analysis generated the following key issues related to the use of VCoPs: 'definitions and approaches', 'technological infrastructure', 'reported benefits', 'participation issues', 'trust and privacy and 'technical ability'. Based on the findings from this review, there is some evidence that VCoPs can offer an informal method of professional and interprofessional development for clinicians, and can decrease social and professional isolation. However, for VCoPs to be successful, issues of privacy, trust, encouragement and technology need to be addressed.

Computer integrated documentation

NASA Technical Reports Server (NTRS)

Boy, Guy

1991-01-01

The main technical issues of the Computer Integrated Documentation (CID) project are presented. The problem of automation of documents management and maintenance is analyzed both from an artificial intelligence viewpoint and from a human factors viewpoint. Possible technologies for CID are reviewed: conventional approaches to indexing and information retrieval; hypertext; and knowledge based systems. A particular effort was made to provide an appropriate representation for contextual knowledge. This representation is used to generate context on hypertext links. Thus, indexing in CID is context sensitive. The implementation of the current version of CID is described. It includes a hypertext data base, a knowledge based management and maintenance system, and a user interface. A series is also presented of theoretical considerations as navigation in hyperspace, acquisition of indexing knowledge, generation and maintenance of a large documentation, and relation to other work.

The Rocket Engine Advancement Program 2 (REAP2)

NASA Technical Reports Server (NTRS)

Harper, Brent (Technical Monitor); Hawk, Clark W.

2004-01-01

The Rocket Engine Advancement Program (REAP) 2 program is being conducted by a university propulsion consortium consisting of the University of Alabama in Huntsville, Penn State University, Purdue University, Tuskegee University and Auburn University. It has been created to bring their combined skills to bear on liquid rocket combustion stability and thrust chamber cooling. The research team involves well established and known researchers in the propulsion community. The cure team provides the knowledge base, research skills, and commitment to achieve an immediate and continuing impact on present and future propulsion issues. through integrated research teams composed of analysts, diagnosticians, and experimentalists working together in an integrated multi-disciplinary program. This paper provides an overview of the program, its objectives and technical approaches. Research on combustion instability and thrust chamber cooling are being accomplished

Creating a foundation for implementing an electronic health records (EHR)-integrated Social Knowledge Networking (SKN) system on medication reconciliation.

PubMed

Rangachari, P; Dellsperger, K C; Fallaw, D; Davis, I; Sumner, M; Ray, W; Fiedler, S; Nguyen, T; Rethemeyer, R

2018-04-01

In fall 2016, Augusta University received a two-year grant from AHRQ, to implement a Social Knowledge Networking (SKN) system for enabling its health system, AU-Health, to progress from "limited use" of EHR Medication Reconciliation (MedRec) Technology, to "meaningful use." Phase 1 sought to identify a comprehensive set of issues related to EHR MedRec encountered by practitioners at AU-Health. These efforts helped develop a Reporting Tool , which, along with a Discussion Tool , was incorporated into the AU-Health EHR, at the end of Phase 1. Phase 2 (currently underway), comprises a 52-week pilot of the EHR-integrated SKN system in outpatient and inpatient medicine units. The purpose of this paper is to describe the methods and results of Phase 1. Phase 1 utilized an exploratory mixed-method approach, involving two rounds of data collection. This included 15 individual interviews followed by a survey of 200 practitioners, i.e., physicians, nurses, and pharmacists, based in the outpatient and inpatient medicine service at AU Health. Thematic analysis of interviews identified 55 issue-items related to EHR MedRec under 9 issue-categories. The survey sought practitioners' importance-rating of all issue-items identified from interviews. A total of 127 (63%) survey responses were received. Factor analysis served to validate the following 6 of the 9 issue-categories, all of which, were rated "Important" or higher (on average), by over 70% of all respondents: 1) Care-Coordination (CCI); 2) Patient-Education (PEI); 3) Ownership-and-Accountability (OAI); 4) Processes-of-Care (PCI); 5) IT-Related (ITRI); and 6) Workforce-Training (WTI). Significance-testing of importance-rating by professional affiliation revealed no statistically significant differences for CCI and PEI; and some statistically significant differences for OAI, PCI, ITRI, and WTI. There were two key gleanings from the issues related to EHR MedRec unearthed by this study: 1) there was an absence of shared understanding among practitioners, of the value of EHR MedRec in promoting patient safety, which contributed to workarounds, and suboptimal use of the EHR MedRec system; and 2) there was a socio-technical dimension to many of the issues, creating an added layer of complexity. These gleanings in turn, provide insights into best practices for managing both clinical transitions-of-care in the EHR MedRec process; and socio-technical challenges encountered in EHR MedRec implementation.

Creating a foundation for implementing an electronic health records (EHR)-integrated Social Knowledge Networking (SKN) system on medication reconciliation

PubMed Central

Rangachari, P.; Dellsperger, K.C; Fallaw, D.; Davis, I.; Sumner, M.; Ray, W.; Fiedler, S.; Nguyen, T.; Rethemeyer, R.

2018-01-01

Background In fall 2016, Augusta University received a two-year grant from AHRQ, to implement a Social Knowledge Networking (SKN) system for enabling its health system, AU-Health, to progress from “limited use” of EHR Medication Reconciliation (MedRec) Technology, to “meaningful use.” Phase 1 sought to identify a comprehensive set of issues related to EHR MedRec encountered by practitioners at AU-Health. These efforts helped develop a Reporting Tool, which, along with a Discussion Tool, was incorporated into the AU-Health EHR, at the end of Phase 1. Phase 2 (currently underway), comprises a 52-week pilot of the EHR-integrated SKN system in outpatient and inpatient medicine units. The purpose of this paper is to describe the methods and results of Phase 1. Methods Phase 1 utilized an exploratory mixed-method approach, involving two rounds of data collection. This included 15 individual interviews followed by a survey of 200 practitioners, i.e., physicians, nurses, and pharmacists, based in the outpatient and inpatient medicine service at AU Health. Results Thematic analysis of interviews identified 55 issue-items related to EHR MedRec under 9 issue-categories. The survey sought practitioners’ importance-rating of all issue-items identified from interviews. A total of 127 (63%) survey responses were received. Factor analysis served to validate the following 6 of the 9 issue-categories, all of which, were rated “Important” or higher (on average), by over 70% of all respondents: 1) Care-Coordination (CCI); 2) Patient-Education (PEI); 3) Ownership-and-Accountability (OAI); 4) Processes-of-Care (PCI); 5) IT-Related (ITRI); and 6) Workforce-Training (WTI). Significance-testing of importance-rating by professional affiliation revealed no statistically significant differences for CCI and PEI; and some statistically significant differences for OAI, PCI, ITRI, and WTI. Conclusion There were two key gleanings from the issues related to EHR MedRec unearthed by this study: 1) there was an absence of shared understanding among practitioners, of the value of EHR MedRec in promoting patient safety, which contributed to workarounds, and suboptimal use of the EHR MedRec system; and 2) there was a socio-technical dimension to many of the issues, creating an added layer of complexity. These gleanings in turn, provide insights into best practices for managing both clinical transitions-of-care in the EHR MedRec process; and socio-technical challenges encountered in EHR MedRec implementation. PMID:29682132

Educating and training industrial ecologists for the 1990s.

PubMed

Troxell, D E

1992-02-01

For industrial ecology to become a reality and flourish, many talents must be integrated into a single system. Basically, there are four types of technologists who must be brought together to create a system: (i) technical specialists-those that can take the state of knowledge to the state of the art and eventually to the state of practice; (ii) technical "generalists"-those that can integrate diverse technologies into a comprehensive solution; (iii) technical managers-those that can lead technical efforts to an optimal solution (these people must have management skills in their area); and (iv) program managers-those that can understand and merge the overall efforts of technology, business, schedule, and finance. The initial questions for industrial ecology in the 1990s are: Do these people presently exist in industry? What will be needed to bring new people (recent graduates) into the field of industrial ecology? For this decade, the people who will develop and lead the concept of industrial ecology are presently in industry. However, certainly few, if any, today understand the concept of industrial ecology as a system issue. Training will be needed for these practitioners of the 1990s so that the overall goal and the mechanism for achieving industrial ecology are understood. A three-tiered approach is presented to define the education/training needed, to conduct training on an industry basis, and then to initiate the training to be done within a corporation. The three tiers propose the use of universities, professional societies, and industry groups. Having universities participate in the training of the 1990s industrial ecologists will give universities insight to the development of industrial ecology, and access to industry needs so that curriculum can be initiated to educate the industrial ecologists of the future.

From Modelling to Execution of Enterprise Integration Scenarios: The GENIUS Tool

NASA Astrophysics Data System (ADS)

Scheibler, Thorsten; Leymann, Frank

One of the predominant problems IT companies are facing today is Enterprise Application Integration (EAI). Most of the infrastructures built to tackle integration issues are proprietary because no standards exist for how to model, develop, and actually execute integration scenarios. EAI patterns gain importance for non-technical business users to ease and harmonize the development of EAI scenarios. These patterns describe recurring EAI challenges and propose possible solutions in an abstract way. Therefore, one can use those patterns to describe enterprise architectures in a technology neutral manner. However, patterns are documentation only used by developers and systems architects to decide how to implement an integration scenario manually. Thus, patterns are not theoretical thought to stand for artefacts that will immediately be executed. This paper presents a tool supporting a method how EAI patterns can be used to generate executable artefacts for various target platforms automatically using a model-driven development approach, hence turning patterns into something executable. Therefore, we introduce a continuous tool chain beginning at the design phase and ending in executing an integration solution in a completely automatically manner. For evaluation purposes we introduce a scenario demonstrating how the tool is utilized for modelling and actually executing an integration scenario.

Advances in drainage: Selected works from the Tenth International Drainage Symposium

USGS Publications Warehouse

Strock, Jeffrey S.; Hay, Christopher; Helmers, Matthew; Nelson, Kelly A.; Sands, Gary R.; Skaggs, R. Wayne; Douglas-Mankin, Kyle R.

2018-01-01

This article introduces a special collection of fourteen articles accepted from among the 140 technical presentations, posters, and meeting papers presented at the 10th International ASABE Drainage Symposium. The symposium continued in the tradition of previous symposia that began in 1965 as a forum for presenting and assessing the progress of drainage research and implementation throughout the world. The articles in this collection address a wide range of topics grouped into five broad categories: (1) crop response, (2) design and management, (3) hydrology and scale, (4) modeling, and (5) water quality. The collection provides valuable information for scientists, engineers, planners, and others working on crop production, water quality, and water quantity issues affected by agricultural drainage. The collection also provides perspectives on the challenges of increasing agricultural production in a changing climate, with ever-greater attention to water quality and quantity concerns that will require integrated technical, economic, and social solutions.

Renewable Energy and Climate Change

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chum, H. L.

2012-01-01

The Intergovernmental Panel on Climate Change issued the Special Report on Renewable Energy Sources and Climate Change Mitigation (SRREN) at http://srren.ipcc-wg3.de/ (May 2011 electronic version; printed form ISBN 978-1-107-60710-1, 2012). More than 130 scientists contributed to the report.* The SRREN assessed existing literature on the future potential of renewable energy for the mitigation of climate change within a portfolio of mitigation options including energy conservation and efficiency, fossil fuel switching, RE, nuclear and carbon capture and storage (CCS). It covers the six most important renewable energy technologies - bioenergy, direct solar, geothermal, hydropower, ocean and wind, as well as theirmore » integration into present and future energy systems. It also takes into consideration the environmental and social consequences associated with these technologies, the cost and strategies to overcome technical as well as non-technical obstacles to their application and diffusion.« less

Large-Scale Brain Simulation and Disorders of Consciousness. Mapping Technical and Conceptual Issues.

PubMed

Farisco, Michele; Kotaleski, Jeanette H; Evers, Kathinka

2018-01-01

Modeling and simulations have gained a leading position in contemporary attempts to describe, explain, and quantitatively predict the human brain's operations. Computer models are highly sophisticated tools developed to achieve an integrated knowledge of the brain with the aim of overcoming the actual fragmentation resulting from different neuroscientific approaches. In this paper we investigate the plausibility of simulation technologies for emulation of consciousness and the potential clinical impact of large-scale brain simulation on the assessment and care of disorders of consciousness (DOCs), e.g., Coma, Vegetative State/Unresponsive Wakefulness Syndrome, Minimally Conscious State. Notwithstanding their technical limitations, we suggest that simulation technologies may offer new solutions to old practical problems, particularly in clinical contexts. We take DOCs as an illustrative case, arguing that the simulation of neural correlates of consciousness is potentially useful for improving treatments of patients with DOCs.

Large-Scale Brain Simulation and Disorders of Consciousness. Mapping Technical and Conceptual Issues

PubMed Central

Farisco, Michele; Kotaleski, Jeanette H.; Evers, Kathinka

2018-01-01

Modeling and simulations have gained a leading position in contemporary attempts to describe, explain, and quantitatively predict the human brain’s operations. Computer models are highly sophisticated tools developed to achieve an integrated knowledge of the brain with the aim of overcoming the actual fragmentation resulting from different neuroscientific approaches. In this paper we investigate the plausibility of simulation technologies for emulation of consciousness and the potential clinical impact of large-scale brain simulation on the assessment and care of disorders of consciousness (DOCs), e.g., Coma, Vegetative State/Unresponsive Wakefulness Syndrome, Minimally Conscious State. Notwithstanding their technical limitations, we suggest that simulation technologies may offer new solutions to old practical problems, particularly in clinical contexts. We take DOCs as an illustrative case, arguing that the simulation of neural correlates of consciousness is potentially useful for improving treatments of patients with DOCs. PMID:29740372

The Utility of a Physics Education in Science Policy

NASA Astrophysics Data System (ADS)

Roberts, Drew

2016-03-01

In order for regulators to create successful policies on technical issues, ranging from environmental protection to distribution of national Grant money, the scientific community must play an integral role in the legislative process. Through a summer-long internship with the Science, Space, and Technology Committee of the U.S. House of Representatives, I have learned that skills developed while pursuing an undergraduate degree in physics are very valuable in the policy realm. My physics education provided me the necessary tools to bridge the goals of the scientific and political communities. The need for effective comprehension and communication of technical subjects provides an important opportunity for individuals with physics degrees to make substantial contributions to government policy. Science policy should be encouraged as one of the many career pathways for physics students. Society of Physics Students, John and Jane Mather Foundation for Science and the Arts.

Comparison of Standards and Technical Requirements of Grid-Connected Wind Power Plants in China and the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, David Wenzhong; Muljadi, Eduard; Tian, Tian

The rapid deployment of wind power has made grid integration and operational issues focal points in industry discussions and research. Compliance with grid connection standards for wind power plants (WPPs) is crucial to ensuring the reliable and stable operation of the electric power grid. This report compares the standards for grid-connected WPPs in China to those in the United States to facilitate further improvements in wind power standards and enhance the development of wind power equipment. Detailed analyses of power quality, low-voltage ride-through capability, active power control, reactive power control, voltage control, and wind power forecasting are provided to enhancemore » the understanding of grid codes in the two largest markets of wind power. This study compares WPP interconnection standards and technical requirements in China to those in the United States.« less

BWR Spent Nuclear Fuel Integrity Research and Development Survey for UKABWR Spent Fuel Interim Storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bevard, Bruce Balkcom; Mertyurek, Ugur; Belles, Randy

The objective of this report is to identify issues and support documentation and identify and detail existing research on spent fuel dry storage; provide information to support potential R&D for the UKABWR (United Kingdom Advanced Boiling Water Reactor) Spent Fuel Interim Storage (SFIS) Pre-Construction Safety Report; and support development of answers to questions developed by the regulator. Where there are gaps or insufficient data, Oak Ridge National Laboratory (ORNL) has summarized the research planned to provide the necessary data along with the schedule for the research, if known. Spent nuclear fuel (SNF) from nuclear power plants has historically been storedmore » on site (wet) in spent fuel pools pending ultimate disposition. Nuclear power users (countries, utilities, vendors) are developing a suite of options and set of supporting analyses that will enable future informed choices about how best to manage these materials. As part of that effort, they are beginning to lay the groundwork for implementing longer-term interim storage of the SNF and the Greater Than Class C (CTCC) waste (dry). Deploying dry storage will require a number of technical issues to be addressed. For the past 4-5 years, ORNL has been supporting the U.S. Department of Energy (DOE) in identifying these key technical issues, managing the collection of data to be used in issue resolution, and identifying gaps in the needed data. During this effort, ORNL subject matter experts (SMEs) have become expert in understanding what information is publicly available and what gaps in data remain. To ensure the safety of the spent fuel under normal and frequent conditions of wet and subsequent dry storage, intact fuel must be shown to: 1.Maintain fuel cladding integrity; 2.Maintain its geometry for cooling, shielding, and subcriticality; 3.Maintain retrievability, and damaged fuel with pinhole or hairline cracks must be shown not to degrade further. Where PWR (pressurized water reactor) information is utilized or referenced, justification has been provided as to why the data can be utilized for BWR fuel.« less

Visuo-Haptic Mixed Reality with Unobstructed Tool-Hand Integration.

PubMed

Cosco, Francesco; Garre, Carlos; Bruno, Fabio; Muzzupappa, Maurizio; Otaduy, Miguel A

2013-01-01

Visuo-haptic mixed reality consists of adding to a real scene the ability to see and touch virtual objects. It requires the use of see-through display technology for visually mixing real and virtual objects, and haptic devices for adding haptic interaction with the virtual objects. Unfortunately, the use of commodity haptic devices poses obstruction and misalignment issues that complicate the correct integration of a virtual tool and the user's real hand in the mixed reality scene. In this work, we propose a novel mixed reality paradigm where it is possible to touch and see virtual objects in combination with a real scene, using commodity haptic devices, and with a visually consistent integration of the user's hand and the virtual tool. We discuss the visual obstruction and misalignment issues introduced by commodity haptic devices, and then propose a solution that relies on four simple technical steps: color-based segmentation of the hand, tracking-based segmentation of the haptic device, background repainting using image-based models, and misalignment-free compositing of the user's hand. We have developed a successful proof-of-concept implementation, where a user can touch virtual objects and interact with them in the context of a real scene, and we have evaluated the impact on user performance of obstruction and misalignment correction.

Core ITAC for Career-Focused Education. Integrated Technical & Academic Competencies.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This document introduces the underlying principles and components of Ohio's Integrated Technical and Academic Competencies (ITAC) system of career-focused education, which combines high-level academics and technical skills with a real-life context for learning that maximizes students' present and future academic and career success. The document…

Crowdsourcing for Challenging Technical Problems - It Works!

NASA Technical Reports Server (NTRS)

Davis, Jeffrey R.

2011-01-01

The NASA Johnson Space Center Space Life Sciences Directorate (SLSD) and Wyle Integrated Science and Engineering (Wyle) will conduct a one-day business cluster at the 62nd IAC so that IAC attendees will understand the benefits of open innovation (crowdsourcing), review successful results of conducting technical challenges in various open innovation projects, and learn how an organization can effectively deploy these new problem solving tools to innovate more efficiently and effectively. Results from both the SLSD open innovation pilot program and the open innovation workshop conducted by the NASA Human Health and Performance Center will be discussed. NHHPC members will be recruited to participate in the business cluster (see membership http://nhhpc.nasa.gov) and as IAF members. Crowdsourcing may be defined as the act of outsourcing tasks that are traditionally performed by an employee or contractor to an undefined, generally large group of people or community (a crowd) in the form of an open call. The open call may be issued by the organization wishing to find a solution to a particular problem or complete a task, or by an open innovation service provider on behalf of that organization. In 2008, the SLSD, with the support of Wyle, established and implemented pilot projects in open innovation (crowdsourcing) to determine if these new internet-based platforms could indeed find solutions to difficult technical challenges. These unsolved technical problems were converted to problem statements, called Challenges by some open innovation service providers, and were then posted externally to seek solutions to these problems. In addition, an open call was issued internally to NASA employees Agency wide (11 Field Centers and NASA HQ) using an open innovation service provider crowdsourcing platform to post NASA challenges from each Center for the others to propose solutions). From 2008 to 2010, the SLSD issued 34 challenges, 14 externally and 20 internally. The 14 external problems or challenges were posted through three different vendors: InnoCentive, yet2.com and TopCoder. The 20 internal challenges were conducted using the InnoCentive crowdsourcing platform designed for use internal to an organization and customized for NASA use, and promoted as NASA@Work. The results were significant. Of the seven InnoCentive external challenges, two full and five partial awards were made in complex technical areas such as predicting solar flares and long-duration food packaging.

Integrated Space Asset Management Database and Modeling

NASA Technical Reports Server (NTRS)

MacLeod, Todd; Gagliano, Larry; Percy, Thomas; Mason, Shane

2015-01-01

Effective Space Asset Management is one key to addressing the ever-growing issue of space congestion. It is imperative that agencies around the world have access to data regarding the numerous active assets and pieces of space junk currently tracked in orbit around the Earth. At the center of this issues is the effective management of data of many types related to orbiting objects. As the population of tracked objects grows, so too should the data management structure used to catalog technical specifications, orbital information, and metadata related to those populations. Marshall Space Flight Center's Space Asset Management Database (SAM-D) was implemented in order to effectively catalog a broad set of data related to known objects in space by ingesting information from a variety of database and processing that data into useful technical information. Using the universal NORAD number as a unique identifier, the SAM-D processes two-line element data into orbital characteristics and cross-references this technical data with metadata related to functional status, country of ownership, and application category. The SAM-D began as an Excel spreadsheet and was later upgraded to an Access database. While SAM-D performs its task very well, it is limited by its current platform and is not available outside of the local user base. Further, while modeling and simulation can be powerful tools to exploit the information contained in SAM-D, the current system does not allow proper integration options for combining the data with both legacy and new M&S tools. This paper provides a summary of SAM-D development efforts to date and outlines a proposed data management infrastructure that extends SAM-D to support the larger data sets to be generated. A service-oriented architecture model using an information sharing platform named SIMON will allow it to easily expand to incorporate new capabilities, including advanced analytics, M&S tools, fusion techniques and user interface for visualizations. In addition, tight control of information sharing policy will increase confidence in the system, which would encourage industry partners to provide commercial data. Combined with the integration of new and legacy M&S tools, a SIMON-based architecture will provide a robust environment that can be extended and expanded indefinitely.

Obtaining Technical Support for Superfund, RCRA and Brownfields Site Issues Fact Sheet

EPA Pesticide Factsheets

EPA’s Technical Support Centers (TSCs) and other technical support services are available to Regional RemedialProject Managers, Corrective Action Staff, and On-Scene Coordinators needing specialized technical expertisefor specific tasks or projects.

Theme: Trends and Issues Affecting the Future of Agricultural Education.

ERIC Educational Resources Information Center

Agricultural Education Magazine, 2000

2000-01-01

Articles discuss trends and issues in agricultural education, community and technical colleges, career/technical studies, Australian agriculture, agricultural science and technology programs in urban areas, genetic engineering, the impact of changing technologies on agricultural education, volunteers, and performance-based assessment. (JOW)

75 FR 61228 - Board Meeting: Technical Lessons Gained From High-Level Nuclear Waste Disposal Efforts

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-04

... NUCLEAR WASTE TECHNICAL REVIEW BOARD Board Meeting: Technical Lessons Gained From High-Level... Waste Policy Amendments Act of 1987, the U.S. Nuclear Waste Technical Review Board will meet in Dulles... of Energy on technical issues and to review the technical validity of DOE activities related to...

Facilitating Progress towards the Sustainable Development Goals through Open Scientific Data and Indicators

NASA Astrophysics Data System (ADS)

Chen, R. S.; Levy, M. A.; de Sherbinin, A. M.; Fischer, A.

2015-12-01

The Sustainable Development Goals (SDGs) represent an unprecedented international commitment to a shared future encompassing sustainable management of the planet and significant improvement in the human condition around the world. The scientific community has both an ethical responsibility and substantial self-interest—as residents of this planet—to help the world community to better understand the complex, interlinked behavior of human and environmental systems and to elucidate pathways to achieve long-term sustainability. Critical to making progress towards the SDGs is the open availability of timely, reliable, usable, and well integrated data and indicators relevant to all SDGs and associated targets. Such data and indicators will not only be valuable in monitoring and evaluation of progress, but also in developing policies and making decisions on environmental and societal issues affecting sustainability from local to global scales. The open availability of such data and indicators can help motivate performance, promote accountability, and facilitate cooperation. A range of scientific, technical, organizational, political, and resource challenges need to be addressed in developing a coherent SDG monitoring and indicator framework. For example, assembling and integrating diverse data on consistent spatial and temporal scales across the relevant natural, social, health, and engineering sciences pose both scientific and technical difficulties, and may require new ways to interlink and organize existing cyberinfrastructure, reconcile different data policy regimes, and fund integration efforts. New information technologies promise more timely and efficient ways of collecting many types of data, but may also raise privacy, control, and equity issues. Scientific review processes to ensure data quality need to be coordinated with the types of quality control and review employed by national statistical agencies for trusted economic and social statistics. Although large investments are already being made in some observing systems such as satellite-based remote sensing, additional resources are needed to fill key gaps, make data useful for decision making, and build capacity in developing countries. Broad engagement by the scientific community is urgently needed.

Fourth Conference on Artificial Intelligence for Space Applications

NASA Technical Reports Server (NTRS)

Odell, Stephen L. (Compiler); Denton, Judith S. (Compiler); Vereen, Mary (Compiler)

1988-01-01

Proceedings of a conference held in Huntsville, Alabama, on November 15-16, 1988. The Fourth Conference on Artificial Intelligence for Space Applications brings together diverse technical and scientific work in order to help those who employ AI methods in space applications to identify common goals and to address issues of general interest in the AI community. Topics include the following: space applications of expert systems in fault diagnostics, in telemetry monitoring and data collection, in design and systems integration; and in planning and scheduling; knowledge representation, capture, verification, and management; robotics and vision; adaptive learning; and automatic programming.

The Spin-Foam Approach to Quantum Gravity.

PubMed

Perez, Alejandro

2013-01-01

This article reviews the present status of the spin-foam approach to the quantization of gravity. Special attention is payed to the pedagogical presentation of the recently-introduced new models for four-dimensional quantum gravity. The models are motivated by a suitable implementation of the path integral quantization of the Plebanski formulation of gravity on a simplicial regularization. The article also includes a self-contained treatment of 2+1 gravity. The simple nature of the latter provides the basis and a perspective for the analysis of both conceptual and technical issues that remain open in four dimensions.

IEEE Smart Grid Series of Standards IEEE 2030 (Interoperability) and IEEE 1547 (Interconnection) Status: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Basso, T.; DeBlasio, R.

The IEEE American National Standards smart grid publications and standards development projects IEEE 2030, which addresses smart grid interoperability, and IEEE 1547TM, which addresses distributed resources interconnection with the grid, have made substantial progress since 2009. The IEEE 2030TM and 1547 standards series focus on systems-level aspects and cover many of the technical integration issues involved in a mature smart grid. The status and highlights of these two IEEE series of standards, which are sponsored by IEEE Standards Coordinating Committee 21 (SCC21), are provided in this paper.

Innovations in clinical trials informatics.

PubMed

Summers, Ron; Vyas, Hiten; Dudhal, Nilesh; Doherty, Neil F; Coombs, Crispin R; Hepworth, Mark

2008-01-01

This paper will investigate innovations in information management for use in clinical trials. The application typifies a complex, adaptive, distributed and information-rich environment for which continuous innovation is necessary. Organisational innovation is highlighted as well as the technical innovations in workflow processes and their representation as an integrated set of web services. Benefits realization uncovers further innovations in the business strand of the work undertaken. Following the description of the development of this information management system, the semantic web is postulated as a possible solution to tame the complexity related to information management issues found within clinical trials support systems.

Virtual reality simulation training of mastoidectomy - studies on novice performance.

PubMed

Andersen, Steven Arild Wuyts

2016-08-01

Virtual reality (VR) simulation-based training is increasingly used in surgical technical skills training including in temporal bone surgery. The potential of VR simulation in enabling high-quality surgical training is great and VR simulation allows high-stakes and complex procedures such as mastoidectomy to be trained repeatedly, independent of patients and surgical tutors, outside traditional learning environments such as the OR or the temporal bone lab, and with fewer of the constraints of traditional training. This thesis aims to increase the evidence-base of VR simulation training of mastoidectomy and, by studying the final-product performances of novices, investigates the transfer of skills to the current gold-standard training modality of cadaveric dissection, the effect of different practice conditions and simulator-integrated tutoring on performance and retention of skills, and the role of directed, self-regulated learning. Technical skills in mastoidectomy were transferable from the VR simulation environment to cadaveric dissection with significant improvement in performance after directed, self-regulated training in the VR temporal bone simulator. Distributed practice led to a better learning outcome and more consolidated skills than massed practice and also resulted in a more consistent performance after three months of non-practice. Simulator-integrated tutoring accelerated the initial learning curve but also caused over-reliance on tutoring, which resulted in a drop in performance when the simulator-integrated tutor-function was discontinued. The learning curves were highly individual but often plateaued early and at an inadequate level, which related to issues concerning both the procedure and the VR simulator, over-reliance on the tutor function and poor self-assessment skills. Future simulator-integrated automated assessment could potentially resolve some of these issues and provide trainees with both feedback during the procedure and immediate assessment following each procedure. Standard setting by establishing a proficiency level that can be used for mastery learning with deliberate practice could also further sophisticate directed, self-regulated learning in VR simulation-based training. VR simulation-based training should be embedded in a systematic and competency-based training curriculum for high-quality surgical skills training, ultimately leading to improved safety and patient care.

The Presidential Address to the Association for Career and Technical Education Research: Using Standards to Reform Teacher Preparation in Career and Technical Education--A Successful Reformation

ERIC Educational Resources Information Center

Whittington, M. Susie

2005-01-01

This article presents the presidential address at the annual conference of the Association for Career and Technical Education Research by M. Susie Whittington, ACTER President 2005. The purpose of the presidential address is to examine a current issue facing the profession, and pose challenges to the membership in the context of that issue. In her…

Preliminary Design of Winged Experimental Rocket by University Consortium

NASA Astrophysics Data System (ADS)

Wakita, Masashi; Yonemoto, Koichi; Akiyama, Tomoki; Aso, Shigeru; Kohsetsu, Yuji; Nagata, Harunori

The project of Winged Experimental Rocket described here is a proposal by the alliance of universities (University Consortium) expanding and integrating the research activities of reusable space transportation system performed by individual universities, and is the proposal that aims at flight proof of the results of advanced research conducted by the universities and JAXA using the university-centered experimental launch systems. This paper verifies the validity of the winged experimental rocket by surveying the technical issues that should be demonstrated and by estimating the airframe scale, weight and finally the total cost. The development schedule of this project was set to five years, where two airframes of different scales will be developed to minimize the risks. A 1.5-meter-long airframe will be first manufactured and conduct flight tests in the third year to verify the design issues. Then, a 2.5-meter-long airframe will be finally developed and conduct a complete flight demonstration of various research issues in the fifth year.

Considerations for RTCA Phase 2 Low Size, Weight, and Power (SWAP) Surveillance Requirements. UAS Integration in the NAS

NASA Technical Reports Server (NTRS)

Santiago, Confesor

2017-01-01

RTCA (Radio Technical Commission for Aeronautics) Special Committee 228 has initiated a second phase for the development of minimum operational performance standards (MOPS) for UAS (Unmanned Aircraft Systems) detect and avoid (DAA) systems. Technologies to enable UAS with less available Size, Weight, and Power (SWaP) will be considered. A white paper is in development for what topics and issues need to be addressed to develop DAA requirements for low SWAP surveillance systems. This briefing will document the issues to be investigated in SC-228. It will also serve as a review with the committee to get feedback so the white paper can be written and finalized. These topics and issues are not necessarily all the things that NASA will contribute to SC-228 during Phase 2, but what the overall committee needs to accomplish. A portion of the work will be in NASA's UAS in the NAS (National Airspace System) project plan.

Legal services: a necessary component of patient navigation.

PubMed

Retkin, Randye; Antoniadis, Domna; Pepitone, Daniel F; Duval, Deanna

2013-05-01

Access to legal advocacy is an essential tool to help cancer patients and survivors through the continuum of care. This article examines delivery models that can seamlessly integrate into patient navigation programs. Technical reports, books, journal articles, and Web sites. Psychosocial obstacles are common barriers of low-income individuals facing a cancer diagnosis. Legal solutions can help to minimize these obstacles, yet patients rarely have access to these services. Training patient navigators to appropriately screen for legal issues and collaborate with attorneys can be used to help prevent, rather than just react to, legal issues by addressing them as a part of a treatment plan. Attorneys working with patient navigators, particularly nurse navigators, can impact oncology nursing practice by providing an innovative collaboration that is consistent with emerging trends in patient-centered treatment. Copyright © 2013. Published by Elsevier Inc.

Integrated watershed planning across jurisdictional boundaries

NASA Astrophysics Data System (ADS)

Watts, A. W.; Roseen, R.; Stacey, P.; Bourdeau, R.

2014-12-01

We will present the foundation for an Coastal Watershed Integrated Plan for three communities in southern New Hampshire. Small communities are often challenged by complex regulatory requirements and limited resources, but are wary of perceived risks in engaging in collaborative projects with other communities. Potential concerns include loss of control, lack of resources to engage in collaboration, technical complexity, and unclear benefits. This project explores a multi-town subwatershed application of integrated planning across jurisdictional boundaries that addresses some of today's highest priority water quality issues: wastewater treatment plant upgrades for nutrient removal; green infrastructure stormwater management for developing and re-developing areas; and regional monitoring of ecosystem indicators in support of adaptive management to achieve nutrient reduction and other water quality goals in local and downstream waters. The project outcome is a collaboratively-developed inter-municipal integrated plan, and a monitoring framework to support cross jurisdictional planning and assess attainment of water quality management goals. This research project has several primary components: 1) assessment of initial conditions, including both the pollutant load inputs and the political, economic and regulatory status within each community, 2) a pollutant load model for point and non-point sources, 3) multi-criteria evaluation of load reduction alternatives 4) a watershed management plan optimized for each community, and for Subwatersheds combining multiple communities. The final plan will quantify the financial and other benefits/drawbacks to each community for both inter municipal and individual pollution control approaches. We will discuss both the technical and collaborative aspects of the work, with lessons learned regarding science to action, incorporation of social, economic and water quality assessment parameters, and stakeholder/researcher interaction.

Drinking Water - National Drinking Water Clearinghouse

Science.gov Websites

relevant to drinking water issues. We provide free and low-cost publications, products, databases , referrals, and more. Free Technical Assistance Calls The NDWC can answer common questions involving issues system troubleshooting. Call our Engineers and technical assistance specialists toll-free at (304) 293

75 FR 68780 - Reliability Monitoring, Enforcement and Compliance Issues; Agenda for the Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-09

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. AD11-1-000] Reliability Monitoring, Enforcement and Compliance Issues; Agenda for the Technical Conference November 2, 2010. The... associated with reliability monitoring, enforcement and compliance. The Commission announced the conference...

AgRISTARS documents tracking list report

NASA Technical Reports Server (NTRS)

Hawkins, J. L.

1983-01-01

A quarterly listing of documents issued and placed in the AgRISTARS tracking system is provided. The technical publications are arranged by type of documents. The reference AgRISTARS document number, title and date of publication, the issuing organization, and the National Technical Information Service reference number is given.

ERCMExpress. Volume 1, Issue 1

ERIC Educational Resources Information Center

US Department of Education, 2005

2005-01-01

This is the inaugural issue of the Emergency Response and Crisis Management (ERCM) Technical Assistance Center's "ERCMExpress," and it focuses on the new technical assistance center. The center will support 243 grantees funded under the Emergency Response and Crisis Management program in managing and implementing their projects, and in sustaining…

Integrating ethics into technical courses: micro-insertion.

PubMed

Davis, Michael

2006-10-01

Perhaps the most common reason science and engineering faculty give for not including 'ethics' (that is, research ethics, engineering ethics, or some discussion of professional responsibility) in their technical classes is that 'there is no room'. This article 1) describes a technique ('micro-insertion') that introduces ethics (and related topics) into technical courses in small enough units not to push out technical material, 2) explains where this technique might fit into the larger undertaking of integrating ethics into the technical (scientific or engineering) curriculum, and 3) concludes with some quantified evidence (collected over more than a decade) suggesting success. Integrating ethics into science and engineering courses is largely a matter of providing context for what is already being taught, context that also makes the material already being taught seem 'more relevant'.

SHARP's systems engineering challenge: rectifying integrated product team requirements with performance issues in an evolutionary spiral development acquisition

NASA Astrophysics Data System (ADS)

Kuehl, C. Stephen

2003-08-01

Completing its final development and early deployment on the Navy's multi-role aircraft, the F/A-18 E/F Super Hornet, the SHAred Reconnaissance Pod (SHARP) provides the war fighter with the latest digital tactical reconnaissance (TAC Recce) Electro-Optical/Infrared (EO/IR) sensor system. The SHARP program is an evolutionary acquisition that used a spiral development process across a prototype development phase tightly coupled into overlapping Engineering and Manufacturing Development (EMD) and Low Rate Initial Production (LRIP) phases. Under a tight budget environment with a highly compressed schedule, SHARP challenged traditional acquisition strategies and systems engineering (SE) processes. Adopting tailored state-of-the-art systems engineering process models allowd the SHARP program to overcome the technical knowledge transition challenges imposed by a compressed program schedule. The program's original goal was the deployment of digital TAC Recce mission capabilities to the fleet customer by summer of 2003. Hardware and software integration technical challenges resulted from requirements definition and analysis activities performed across a government-industry led Integrated Product Team (IPT) involving Navy engineering and test sites, Boeing, and RTSC-EPS (with its subcontracted hardware and government furnished equipment vendors). Requirements development from a bottoms-up approach was adopted using an electronic requirements capture environment to clarify and establish the SHARP EMD product baseline specifications as relevant technical data became available. Applying Earned-Value Management (EVM) against an Integrated Master Schedule (IMS) resulted in efficiently managing SE task assignments and product deliveries in a dynamically evolving customer requirements environment. Application of Six Sigma improvement methodologies resulted in the uncovering of root causes of errors in wiring interconnectivity drawings, pod manufacturing processes, and avionics requirements specifications. Utilizing the draft NAVAIR SE guideline handbook and the ANSI/EIA-632 standard: Processes for Engineering a System, a systems engineering tailored process approach was adopted for the accelerated SHARP EMD prgram. Tailoring SE processes in this accelerated product delivery environment provided unique opportunities to be technically creative in the establishment of a product performance baseline. This paper provides an historical overview of the systems engineering activities spanning the prototype phase through the EMD SHARP program phase, the performance requirement capture activities and refinement process challenges, and what SE process improvements can be applied to future SHARP-like programs adopting a compressed, evolutionary spiral development acquisition paradigm.

Integrate oral communication with technical writing: Towards a rationale

NASA Technical Reports Server (NTRS)

Skelton, T.

1981-01-01

Integrating oral communication and technical writing instruction, to give students the opportunity to learn and practice interpersonal skills, is proposed. By linking speech and writing the importance of small-group interaction in developing transferrable ideas is acknowledged. Three reasons for integration are examined: workday activities, application of role-taking to writing, and conflict resolution. Four advantages of integration are stated.

Technosocial Modeling of IED Threat Scenarios and Attacks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitney, Paul D.; Brothers, Alan J.; Coles, Garill A.

2009-03-23

This paper describes an approach for integrating sociological and technical models to develop more complete threat assessment. Current approaches to analyzing and addressing threats tend to focus on the technical factors. This paper addresses development of predictive models that encompass behavioral as well as these technical factors. Using improvised explosive device (IED) attacks as motivation, this model supports identification of intervention activities 'left of boom' as well as prioritizing attack modalities. We show how Bayes nets integrate social factors associated with IED attacks into general threat model containing technical and organizational steps from planning through obtaining the IED to initiationmore » of the attack. The social models are computationally-based representations of relevant social science literature that describes human decision making and physical factors. When combined with technical models, the resulting model provides improved knowledge integration into threat assessment for monitoring. This paper discusses the construction of IED threat scenarios, integration of diverse factors into an analytical framework for threat assessment, indicator identification for future threats, and future research directions.« less

Sociotechnical Walkthrough: A Means for Knowledge Integration

ERIC Educational Resources Information Center

Herrmann, Thomas; Loser, Kai-Uwe; Jahnke, Isa

2007-01-01

Purpose: The purpose of this research is to show that for the successful development of socio-technical systems it is essential that various stakeholders are able to integrate their different knowledge and perspectives. A method that supports knowledge integration in the course of introduction and development of socio-technical systems is the…

Integrated Bibliographic Information System: Integrating Resources by Integrating Information Technologies.

ERIC Educational Resources Information Center

Cotter, Gladys A.; Hartt, Richard W.

The Defense Technical Information Center (DTIC), an organization charged with providing information services to the Department of Defense (DoD) scientific and technical community, actively seeks ways to promote resource sharing as a means for speeding access to information while reducing the costs of information processing throughout the technical…

IMIS: Integrated Maintenance Information System. A maintenance information delivery concept

NASA Technical Reports Server (NTRS)

Vonholle, Joseph C.

1987-01-01

The Integrated Maintenance Information System (IMIS) will optimize the use of available manpower, enhance technical performance, improve training, and reduce the support equipment and documentation needed for deployment. It will serve as the technician's single, integrated source of all the technical information required to perform modern aircraft maintenance.

Workplace Health and Safety across the Vocational/Technical Curriculum.

ERIC Educational Resources Information Center

Ryan, Thomas; Hinkley, Carl

This document contains the outcomes of a pilot project to develop materials and methods of integrating occupational health and safety into the curriculum of the technologies at a technical college. Section I is a model of how to integrate health and safety into a vocational-technical curriculum. Based on the Outcomes-Based Guidelines developed by…

Integrated Data Modeling and Simulation on the Joint Polar Satellite System Program

NASA Technical Reports Server (NTRS)

Roberts, Christopher J.; Boyce, Leslye; Smith, Gary; Li, Angela; Barrett, Larry

2012-01-01

The Joint Polar Satellite System is a modern, large-scale, complex, multi-mission aerospace program, and presents a variety of design, testing and operational challenges due to: (1) System Scope: multi-mission coordination, role, responsibility and accountability challenges stemming from porous/ill-defined system and organizational boundaries (including foreign policy interactions) (2) Degree of Concurrency: design, implementation, integration, verification and operation occurring simultaneously, at multiple scales in the system hierarchy (3) Multi-Decadal Lifecycle: technical obsolesce, reliability and sustainment concerns, including those related to organizational and industrial base. Additionally, these systems tend to become embedded in the broader societal infrastructure, resulting in new system stakeholders with perhaps different preferences (4) Barriers to Effective Communications: process and cultural issues that emerge due to geographic dispersion and as one spans boundaries including gov./contractor, NASA/Other USG, and international relationships.

Application of an ADS-B Sense and Avoid Algorithm

NASA Technical Reports Server (NTRS)

Arteaga, Ricardo; Kotcher, Robert; Cavalin, Moshe; Dandachy, Mohammed

2016-01-01

The National Aeronautics and Space Administration Armstrong Flight Research Center in Edwards, California is leading a program aimed towards integrating unmanned aircraft system into the national airspace system (UAS in the NAS). The overarching goal of the program is to reduce technical barriers associated with related safety issues as well as addressing challenges that will allow UAS routine access to the national airspace. This research paper focuses on three novel ideas: (1) A design of an integrated UAS equipped with Automatic Dependent Surveillance-Broadcast that constructs a more accurate state-based airspace model; (2) The use of Stratway Algorithm in a real-time environment; and (3) The verification and validation of sense and avoid performance and usability test results which provide a pilot's perspective on how our system will benefit the UAS in the NAS program for both piloted and unmanned aircraft.

Psychology in nuclear power plants: an integrative approach to safety - general statement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shikiar, R.

Since the accident at the Three Mile Island nuclear power plant on March 28, 1979, the commercial nuclear industry in the United States has paid increasing attention to the role of humans in overall plant safety. As the regulatory body with primary responsibility for ensuring public health and safety involving nuclear operations, the United States Nuclear Regulatory Commission (NRC) has also become increasingly involved with the ''human'' side of nuclear operations. The purpose of this symposium is to describe a major program of research and technical assistance that the Pacific Northwest Laboratory is performing for the NRC that deals withmore » the issues of safety at nuclear power plants (NPPs). This program addresses safety from several different levels of analysis, which are all important within the context of an integrative approach to system safety.« less

Improving integration and coordination of funding, technical assistance, and reporting/data collection: recommendations from CDC and USAPI stakeholders.

PubMed

Ka'opua, Lana Sue I; White, Susan F; Rochester, Phyllis F; Holden, Debra J

2011-03-01

Current US Federal funding mechanisms may foster program silos that disable sharing of resources and information across programs within a larger system of public health services. Such silos present challenges to USAPI communities where human resources, health infrastructure, and health financing are limited. Integrative and coordinated approaches have been recommended. The CDC Pacific Islands Integration and Coordination project was initiated by the CDC Division of Cancer Prevention and Control (DCPC). The project aim was to identify ways for the CDC to collaborate with the USAPI in improving CDC activities and processes related to chronic disease. This article focuses on recommendations for improving coordination and integration in three core areas of health services programming: funding, program reporting/data collection and analysis, and technical assistance. Preliminary information on challenges and issues relevant to the core areas was gathered through site visits, focus groups, key informant interviews, and other sources. This information was used by stakeholder groups from the CDC and the USAPI to develop recommendations in the core programming areas. Recommendations generated at the CDC and USAPI stakeholder meetings were prepared into a single set of recommendations and stakeholders reviewed the document for accuracy prior to its dissemination to CDC's National Center for Chronic Disease Prevention and Health Promotion programs management and staff. Key recommendations, include: (1) consideration of resources and other challenges unique to the USAPI when reviewing funding applications, (2) consideration of ways to increase flexibility in USAPI use of program funds, (3) dedication of funding and human resources for technical assistance, (4) provision of opportunities for capacity-building across programs and jurisdictions, (5) consideration of ways to more directly link program reporting with technical assistance. This project provided a unique opportunity for CDC and USAPI stakeholders to share diverse perspectives on challenges to public health programs in the USAPI. Despite diverse experiences, the final set of recommendations reflected a high level of concordance between USAPI and CDC stakeholders. Recommendations have informed or reinforced actions initiated by the DCPC, including the dedication of funds for leadership institutes aimed at enhancing USAPI capacity for sustainable, integrated regional and jurisdictional cancer control infrastructure. Such efforts are an important beginning, but more remains to be done. Indicated is the need for continuous dialogue and collaboration. While this project focused on the USAPI, our results may be relevant to those interested in inter-organizational collaborations, medically underserved areas, public health services programs, and community-based participatory approaches.

Indigence and access to health care in sub-Saharan Africa.

PubMed

Stierle, F; Kaddar, M; Tchicaya, A; Schmidt-Ehry, B

1999-01-01

Access to health care services for the poor and indigent is hampered by current policies of health care financing in sub-Saharan Africa. This paper reviews the issue as it is discussed in the international literature. No real strategies seem to exist for covering the health care of the indigent. Frequently, definitions of poverty and indigence are imprecise, the assessment of indigence is difficult for conceptual and technical reasons, and, therefore, the actual extent of indigence in Africa is not well known. Explicit policies rarely exist, and systematic evaluation of experiences is scarce. Results in terms of adequately identifying the indigent, and of mechanisms to improve indigents' access to health care, are rather deceiving. Policies to reduce poverty, and improve indigents' access to health care, seem to pursue strategies of depoliticizing the issue of social injustice and inequities. The problem is treated in a 'technical' manner, identifying and implementing 'operational' measures of social assistance. This approach, however, cannot resolve the problem of social exclusion, and, consequently, the problem of excluding large parts of African populations from modern health care. Therefore, this approach has to be integrated into a more 'political' approach which is interested in the process of impoverishment, and which addresses the macro-economic and social causes of poverty and inequity.

Considerations for the establishment of a machinery monitoring analysis program for surface ships of the US Navy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strunk, W.D.

1987-01-01

Personnel at the Oak Ridge National Laboratory were tasked by the US Navy to assist in establishing a maintenance monitoring program for machinery aboard surface ships. Given the number of surface ships, the variety of locations in which they operate, the different types of equipment (rotating and reciprocating, as well as instrumentation), and the different procedures which control the operation and maintenance of a ship, it can be seen, apart from the logistics of organizing such a monitoring program, that the technical issues are as varied and numerous as the ships themselves. Unique methods and procedures have been developed tomore » perform the tasks required on a large scale. Among the specific tasks and technical issues addressed were the development and installation of a data collection and communication instrumentation system for each port, the qualification of measurement methodologies and techniques, the establishment of computer data bases, the evaluation of the instrumentation used, training of civilian and military personnel, development of machinery condition assessment aids using machine design and modal analysis information, and development of computer displays. After these tasks were completed and the appropriate resolution integrated into the program, the final task was the development of a method to continually evaluate the effectiveness of the program, using actual maintenance records.« less

Integrating precision cancer medicine into healthcare-policy, practice, and research challenges.

PubMed

Bertier, Gabrielle; Carrot-Zhang, Jian; Ragoussis, Vassilis; Joly, Yann

2016-10-24

Precision medicine (PM) can be defined as a predictive, preventive, personalized, and participatory healthcare service delivery model. Recent developments in molecular biology and information technology make PM a reality today through the use of massive amounts of genetic, 'omics', clinical, environmental, and lifestyle data. With cancer being one of the most prominent public health threats in developed countries, both the research community and governments have been investing significant time, money, and efforts in precision cancer medicine (PCM). Although PCM research is extremely promising, a number of hurdles still remain on the road to an optimal integration of standardized and evidence-based use of PCM in healthcare systems. Indeed, PCM raises a number of technical, organizational, ethical, legal, social, and economic challenges that have to be taken into account in the development of an appropriate health policy framework. Here, we highlight some of the more salient issues regarding the standards needed for integration of PCM into healthcare systems, and we identify fields where more research is needed before policy can be implemented. Key challenges include, but are not limited to, the creation of new standards for the collection, analysis, and sharing of samples and data from cancer patients, and the creation of new clinical trial designs with renewed endpoints. We believe that these issues need to be addressed as a matter of priority by public health policymakers in the coming years for a better integration of PCM into healthcare.

Does service integration improve technical quality of care in low-resource settings? An evaluation of a model integrating HIV care into family planning services in Kenya

PubMed Central

Mutemwa, Richard; Mayhew, Susannah H; Warren, Charlotte E; Abuya, Timothy; Ndwiga, Charity; Kivunaga, Jackline

2017-01-01

Abstract The aim of this study was to investigate association between HIV and family planning integration and technical quality of care. The study focused on technical quality of client–provider consultation sessions. The cross-sectional study observed 366 client–provider consultation sessions and interviewed 37 health care providers in 12 public health facilities in Kenya. Multilevel random intercept and linear regression models were fitted to the matched data to investigate relationships between service integration and technical quality of care as well as associations between facility-level structural and provider factors and technical quality of care. A sensitivity analysis was performed to test for hidden bias. After adjusting for facility-level structural factors, HIV/family planning integration was found to have significant positive effect on technical quality of the consultation session, with average treatment effect 0.44 (95% CI: 0.63–0.82). Three of the 12 structural factors were significantly positively associated with technical quality of consultation session including: availability of family planning commodities (9.64; 95% CI: 5.07–14.21), adequate infrastructure (5.29; 95% CI: 2.89–7.69) and reagents (1.48; 95% CI: 1.02–1.93). Three of the nine provider factors were significantly positively associated with technical quality of consultation session: appropriate provider clinical knowledge (3.14; 95% CI: 1.92–4.36), job satisfaction (2.02; 95% CI: 1.21–2.83) and supervision (1.01; 95% CI: 0.35–1.68), while workload (−0.88; 95% CI: −1.75 to − 0.01) was negatively associated. Technical quality of the client–provider consultation session was also determined by duration of the consultation and type of clinic visit and appeared to depend on whether the clinic visit occurred early or later in the week. Integration of HIV care into family planning services can improve the technical quality of client–provider consultation sessions as measured by both health facility structural and provider factors. PMID:29194543

Does service integration improve technical quality of care in low-resource settings? An evaluation of a model integrating HIV care into family planning services in Kenya.

PubMed

Mutemwa, Richard; Mayhew, Susannah H; Warren, Charlotte E; Abuya, Timothy; Ndwiga, Charity; Kivunaga, Jackline

2017-11-01

The aim of this study was to investigate association between HIV and family planning integration and technical quality of care. The study focused on technical quality of client-provider consultation sessions. The cross-sectional study observed 366 client-provider consultation sessions and interviewed 37 health care providers in 12 public health facilities in Kenya. Multilevel random intercept and linear regression models were fitted to the matched data to investigate relationships between service integration and technical quality of care as well as associations between facility-level structural and provider factors and technical quality of care. A sensitivity analysis was performed to test for hidden bias. After adjusting for facility-level structural factors, HIV/family planning integration was found to have significant positive effect on technical quality of the consultation session, with average treatment effect 0.44 (95% CI: 0.63-0.82). Three of the 12 structural factors were significantly positively associated with technical quality of consultation session including: availability of family planning commodities (9.64; 95% CI: 5.07-14.21), adequate infrastructure (5.29; 95% CI: 2.89-7.69) and reagents (1.48; 95% CI: 1.02-1.93). Three of the nine provider factors were significantly positively associated with technical quality of consultation session: appropriate provider clinical knowledge (3.14; 95% CI: 1.92-4.36), job satisfaction (2.02; 95% CI: 1.21-2.83) and supervision (1.01; 95% CI: 0.35-1.68), while workload (-0.88; 95% CI: -1.75 to - 0.01) was negatively associated. Technical quality of the client-provider consultation session was also determined by duration of the consultation and type of clinic visit and appeared to depend on whether the clinic visit occurred early or later in the week. Integration of HIV care into family planning services can improve the technical quality of client-provider consultation sessions as measured by both health facility structural and provider factors. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

European DEMO design strategy and consequences for materials

NASA Astrophysics Data System (ADS)

Federici, G.; Biel, W.; Gilbert, M. R.; Kemp, R.; Taylor, N.; Wenninger, R.

2017-09-01

Demonstrating the production of net electricity and operating with a closed fuel-cycle remain unarguably the crucial steps towards the exploitation of fusion power. These are the aims of a demonstration fusion reactor (DEMO) proposed to be built after ITER. This paper briefly describes the DEMO design options that are being considered in Europe for the current conceptual design studies as part of the Roadmap to Fusion Electricity Horizon 2020. These are not intended to represent fixed and exclusive design choices but rather ‘proxies’ of possible plant design options to be used to identify generic design/material issues that need to be resolved in future fusion reactor systems. The materials nuclear design requirements and the effects of radiation damage are briefly analysed with emphasis on a pulsed ‘low extrapolation’ system, which is being used for the initial design integration studies, based as far as possible on mature technologies and reliable regimes of operation (to be extrapolated from the ITER experience), and on the use of materials suitable for the expected level of neutron fluence. The main technical issues arising from the plasma and nuclear loads and the effects of radiation damage particularly on the structural and heat sink materials of the vessel and in-vessel components are critically discussed. The need to establish realistic target performance and a development schedule for near-term electricity production tends to favour more conservative technology choices. The readiness of the technical (physics and technology) assumptions that are being made is expected to be an important factor for the selection of the technical features of the device.

Ares I-X Roll Control System Development

NASA Technical Reports Server (NTRS)

Unger, Ronald J.; Massey, Edmund C.

2009-01-01

Project Managers often face challenging technical, schedule and budget issues. This presentation will explore how the Ares I-X Roll Control System Integrated Product Team (IPT) mitigated challenges such as concurrent engineering requirements and environments and evolving program processes, while successfully managing an aggressive project schedule and tight budget. IPT challenges also included communications and negotiations among inter- and intra-government agencies, including the US Air Force, NASA/MSFC Propulsion Engineering, LaRC, GRC, KSC, WSTF, and the Constellation Program. In order to successfully meet these challenges it was essential that the IPT define those items that most affected the schedule critical path, define early mitigation strategies to reduce technical, schedule, and budget risks, and maintain the end-product focus of an "unmanned test flight" context for the flight hardware. The makeup of the IPT and how it would function were also important considerations. The IPT consisted of NASA/MSFC (project management, engineering, and safety/quality) and contractors (Teledyne Brown Engineering and Pratt and Whitney Rocketdyne, who supplied heritage hardware experience). The early decision to have a small focused IPT working "badgelessly" across functional lines to eliminate functional stove-piping allowed for many more tasks to be done by fewer people. It also enhanced a sense of ownership of the products, while still being able to revert back to traditional roles in order to provide the required technical independence in design reviews and verification closures. This presentation will highlight several prominent issues and discuss how they were mitigated and the resulting Lessons Learned that might benefit other projects.

32 CFR 202.13 - Technical assistance for public participation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Reporting Requirements § 202.13 Technical assistance for public participation. Community members of a RAB or TRC may request technical assistance for interpreting scientific and engineering issues with regard to...

Organizational issues in the implementation and adoption of health information technology innovations: an interpretative review.

PubMed

Cresswell, Kathrin; Sheikh, Aziz

2013-05-01

Implementations of health information technologies are notoriously difficult, which is due to a range of inter-related technical, social and organizational factors that need to be considered. In the light of an apparent lack of empirically based integrated accounts surrounding these issues, this interpretative review aims to provide an overview and extract potentially generalizable findings across settings. We conducted a systematic search and critique of the empirical literature published between 1997 and 2010. In doing so, we searched a range of medical databases to identify review papers that related to the implementation and adoption of eHealth applications in organizational settings. We qualitatively synthesized this literature extracting data relating to technologies, contexts, stakeholders, and their inter-relationships. From a total body of 121 systematic reviews, we identified 13 systematic reviews encompassing organizational issues surrounding health information technology implementations. By and large, the evidence indicates that there are a range of technical, social and organizational considerations that need to be deliberated when attempting to ensure that technological innovations are useful for both individuals and organizational processes. However, these dimensions are inter-related, requiring a careful balancing act of strategic implementation decisions in order to ensure that unintended consequences resulting from technology introduction do not pose a threat to patients. Organizational issues surrounding technology implementations in healthcare settings are crucially important, but have as yet not received adequate research attention. This may in part be due to the subjective nature of factors, but also due to a lack of coordinated efforts toward more theoretically-informed work. Our findings may be used as the basis for the development of best practice guidelines in this area. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Integrated Solar Upper Stage Technical Support

NASA Technical Reports Server (NTRS)

Jaworske, Donald A.

1998-01-01

NASA Lewis Research Center is participating in the Integrated Solar Upper Stage (ISUS) program. This program is a ground-based demonstration of an upper stage concept that will be used to generate both solar propulsion and solar power. Solar energy collected by a primary concentrator is directed into the aperture of a secondary concentrator and further concentrated into the aperture of a heat receiver. The energy stored in the receiver-absorber-converter is used to heat hydrogen gas to provide propulsion during the orbital transfer portion of the mission. During the balance of the mission, electric power is generated by thermionic diodes. Several materials issues were addressed as part of the technical support portion of the ISUS program, including: 1) Evaluation of primary concentrator coupons; 2) Evaluation of secondary concentrator coupons; 3) Evaluation of receiver-absorber-converter coupons; 4) Evaluation of in-test witness coupons. Two different types of primary concentrator coupons were evaluated from two different contractors-replicated coupons made from graphite-epoxy composite and coupons made from microsheet glass. Specular reflectivity measurements identified the replicated graphite-epoxy composite coupons as the primary concentrator material of choice. Several different secondary concentrator materials were evaluated, including a variety of silver and rhodium reflectors. The specular reflectivity of these materials was evaluated under vacuum at temperatures up to 800 C. The optical properties of several coupons of rhenium on graphite were evaluated to predict the thermal performance of the receiver-absorber-converter. Finally, during the ground test demonstration, witness coupons placed in strategic locations throughout the thermal vacuum facility were evaluated for contaminants. All testing for the ISUS program was completed successfully in 1997. Investigations related to materials issues have proven helpful in understanding the operation of the test article, leading to a potential ISUS flight test in 2002.

Fuzzy Multicriteria Decision Analysis for Adaptive Watershed Management

NASA Astrophysics Data System (ADS)

Chang, N.

2006-12-01

The dramatic changes of societal complexity due to intensive interactions among agricultural, industrial, and municipal sectors have resulted in acute issues of water resources redistribution and water quality management in many river basins. Given the fact that integrated watershed management is more a political and societal than a technical challenge, there is a need for developing a compelling method leading to justify a water-based land use program in some critical regions. Adaptive watershed management is viewed as an indispensable tool nowadays for providing step-wise constructive decision support that is concerned with all related aspects of the water consumption cycle and those facilities affecting water quality and quantity temporally and spatially. Yet the greatest challenge that decision makers face today is to consider how to leverage ambiguity, paradox, and uncertainty to their competitive advantage of management policy quantitatively. This paper explores a fuzzy multicriteria evaluation method for water resources redistribution and subsequent water quality management with respect to a multipurpose channel-reservoir system--the Tseng- Wen River Basin, South Taiwan. Four fuzzy operators tailored for this fuzzy multicriteria decision analysis depict greater flexibility in representing the complexity of various possible trade-offs among management alternatives constrained by physical, economic, and technical factors essential for adaptive watershed management. The management strategies derived may enable decision makers to integrate a vast number of internal weirs, water intakes, reservoirs, drainage ditches, transfer pipelines, and wastewater treatment facilities within the basin and bring up the permitting issue for transboundary diversion from a neighboring river basin. Experience gained indicates that the use of different types of fuzzy operators is highly instructive, which also provide unique guidance collectively for achieving the overarching goals of sustainable development on a regional scale.

77 FR 46306 - Fluxapyroxad; Pesticide Tolerances Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-03

...; Pesticide Tolerances Technical Amendment AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule; technical amendment. SUMMARY: EPA issued a final rule in the Federal Register of May 14, 2012, concerning.... Inadvertently, the terminology for the oilseed crop group and for dried plums was incorrect. This technical...

Technical documentation challenges in aviation maintenance : a proceedings report.

DOT National Transportation Integrated Search

2012-11-01

The 2012 Technical Documentation workshop addressed both problems and solutions associated with technical : documentation for maintenance. These issues are known to cause errors, rework, maintenance delays, other : safety hazards, and FAA administrat...

Integrated Technical Curriculum. Curriculum Developed for Project Second Chance II: Tech Reading, Tech Science, Tech Math, Automotive.

ERIC Educational Resources Information Center

Sorensen, Mary K.; And Others

This integrated technical curriculum is designed to enroll and retain adult high school noncompleters in occupational programs by providing them with the remedial and content-area reading instruction needed for success in an automotive program. The following topics are covered in the four units: (1) skills for reading technical materials (basics…

Fusion or confusion: knowledge or nonsense?

NASA Astrophysics Data System (ADS)

Rothman, Peter L.; Denton, Richard V.

1991-08-01

The terms 'data fusion,' 'sensor fusion,' multi-sensor integration,' and 'multi-source integration' have been used widely in the technical literature to refer to a variety of techniques, technologies, systems, and applications which employ and/or combine data derived from multiple information sources. Applications of data fusion range from real-time fusion of sensor information for the navigation of mobile robots to the off-line fusion of both human and technical strategic intelligence data. The Department of Defense Critical Technologies Plan lists data fusion in the highest priority group of critical technologies, but just what is data fusion? The DoD Critical Technologies Plan states that data fusion involves 'the acquisition, integration, filtering, correlation, and synthesis of useful data from diverse sources for the purposes of situation/environment assessment, planning, detecting, verifying, diagnosing problems, aiding tactical and strategic decisions, and improving system performance and utility.' More simply states, sensor fusion refers to the combination of data from multiple sources to provide enhanced information quality and availability over that which is available from any individual source alone. This paper presents a survey of the state-of-the- art in data fusion technologies, system components, and applications. A set of characteristics which can be utilized to classify data fusion systems is presented. Additionally, a unifying mathematical and conceptual framework within which to understand and organize fusion technologies is described. A discussion of often overlooked issues in the development of sensor fusion systems is also presented.

From Management to Negotiation: Technical and Institutional Innovations for Integrated Water Resource Management in the Upper Comoé River Basin, Burkina Faso

NASA Astrophysics Data System (ADS)

Roncoli, Carla; Kirshen, Paul; Etkin, Derek; Sanon, Moussa; Somé, Léopold; Dembélé, Youssouf; Sanfo, Bienvenue J.; Zoungrana, Jacqueline; Hoogenboom, Gerrit

2009-10-01

This study focuses on the potential role of technical and institutional innovations for improving water management in a multi-user context in Burkina Faso. We focus on a system centered on three reservoirs that capture the waters of the Upper Comoé River Basin and servicing a diversity of users, including a sugar manufacturing company, a urban water supply utility, a farmer cooperative, and other downstream users. Due to variable and declining rainfall and expanding users’ needs, drastic fluctuations in water supply and demand occur during each dry season. A decision support tool was developed through participatory research to enable users to assess the impact of alternative release and diversion schedules on deficits faced by each user. The tool is meant to be applied in the context of consultative planning by a local user committee that has been created by a new national integrated water management policy. We contend that both solid science and good governance are instrumental in realizing efficient and equitable water management and adaptation to climate variability and change. But, while modeling tools and negotiation platforms may assist users in managing climate risk, they also introduce additional uncertainties into the deliberative process. It is therefore imperative to understand how these technological and institutional innovations frame water use issues and decisions to ensure that such framing is consistent with the goals of integrated water resource management.

Optimal coordinated voltage control in active distribution networks using backtracking search algorithm

PubMed Central

Tengku Hashim, Tengku Juhana; Mohamed, Azah

2017-01-01

The growing interest in distributed generation (DG) in recent years has led to a number of generators connected to a distribution system. The integration of DGs in a distribution system has resulted in a network known as active distribution network due to the existence of bidirectional power flow in the system. Voltage rise issue is one of the predominantly important technical issues to be addressed when DGs exist in an active distribution network. This paper presents the application of the backtracking search algorithm (BSA), which is relatively new optimisation technique to determine the optimal settings of coordinated voltage control in a distribution system. The coordinated voltage control considers power factor, on-load tap-changer and generation curtailment control to manage voltage rise issue. A multi-objective function is formulated to minimise total losses and voltage deviation in a distribution system. The proposed BSA is compared with that of particle swarm optimisation (PSO) so as to evaluate its effectiveness in determining the optimal settings of power factor, tap-changer and percentage active power generation to be curtailed. The load flow algorithm from MATPOWER is integrated in the MATLAB environment to solve the multi-objective optimisation problem. Both the BSA and PSO optimisation techniques have been tested on a radial 13-bus distribution system and the results show that the BSA performs better than PSO by providing better fitness value and convergence rate. PMID:28991919

Optimal coordinated voltage control in active distribution networks using backtracking search algorithm.

PubMed

Tengku Hashim, Tengku Juhana; Mohamed, Azah

2017-01-01

The growing interest in distributed generation (DG) in recent years has led to a number of generators connected to a distribution system. The integration of DGs in a distribution system has resulted in a network known as active distribution network due to the existence of bidirectional power flow in the system. Voltage rise issue is one of the predominantly important technical issues to be addressed when DGs exist in an active distribution network. This paper presents the application of the backtracking search algorithm (BSA), which is relatively new optimisation technique to determine the optimal settings of coordinated voltage control in a distribution system. The coordinated voltage control considers power factor, on-load tap-changer and generation curtailment control to manage voltage rise issue. A multi-objective function is formulated to minimise total losses and voltage deviation in a distribution system. The proposed BSA is compared with that of particle swarm optimisation (PSO) so as to evaluate its effectiveness in determining the optimal settings of power factor, tap-changer and percentage active power generation to be curtailed. The load flow algorithm from MATPOWER is integrated in the MATLAB environment to solve the multi-objective optimisation problem. Both the BSA and PSO optimisation techniques have been tested on a radial 13-bus distribution system and the results show that the BSA performs better than PSO by providing better fitness value and convergence rate.

Stakeholder identification of advanced technology opportunities at international ports of entry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parker, S.K.; Icerman, L.

As part of the Advanced Technologies for International and Intermodal Ports of Entry (ATIPE) Project, a diverse group of stakeholders was engaged to help identify problems experienced at inland international border crossings, particularly those at the US-Mexican border. The fundamental issue at international ports of entry is reducing transit time through the required documentation and inspection processes. Examples of other issues or problems, typically manifested as time delays at border crossings, repeatedly mentioned by stakeholders include: (1) lack of document standardization; (2) failure to standardize inspection processes; (3) inadequate information and communications systems; (4) manual fee and tariff collection; (5)more » inconsistency of processes and procedures; and (6) suboptimal cooperation among governmental agencies. Most of these issues can be addressed to some extent by the development of advanced technologies with the objective of allowing ports of entry to become more efficient while being more effective. Three categories of technologies were unambiguously of high priority to port of entry stakeholders: (1) automated documentation; (2) systems integration; and (3) vehicle and cargo tracking. Together, these technologies represent many of the technical components necessary for pre-clearance of freight approaching international ports of entry. Integration of vehicle and cargo tracking systems with port of entry information and communications systems, as well as existing industry legacy systems, should further enable border crossings to be accomplished consistently with optimal processing times.« less

78 FR 44104 - Notice of Intent To Issue a Funding Opportunity Announcement; Technical Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-23

... Funding Opportunity Announcement; Technical Assistance AGENCY: Federal Energy Management Program, Office.... This notice also is to inform Federal agencies of the availability of technical assistance in advance.... FOR FURTHER INFORMATION CONTACT: For requests for technical assistance regarding CHP, please contact...

48 CFR 952.242-70 - Technical direction.

Code of Federal Regulations, 2010 CFR

2010-10-01

... contract. (d) All technical direction shall be issued in writing by the COR. (e) The Contractor must... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technical direction. 952... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.242-70 Technical...

75 FR 37722 - OMB Approvals Under the Paperwork Reduction Act; Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-30

... since its last update. B. Why is this Technical Amendment Issued as a Final Rule? The information... provisions since the last update of this table. The paperwork burden associated with these new provisions was... amendment updates the table that lists the Office of Management and Budget (OMB) control numbers issued...

Educational Reform and the World of Work: Italy

ERIC Educational Resources Information Center

von Blumenthal, Viktor

1977-01-01

One of a four-issue series on educational reform and the world of work in Europe, this issue discusses educational planning and secondary school reform in Italy. Topics discussed include planning and research in vocational-technical education, and the relation between acquisition of specific skills and scientific and technical progress. (Author/DB)

Metric Conversion in the Construction Industries--Technical Issues and Status.

ERIC Educational Resources Information Center

Milton, Hans J.; Berry, Sandra A.

This Special Publication was prepared at the request of the Metric Symposium Planning Committee of the National Institute of Building Sciences (NIBS). It is intended to provide information on technical issues and status of metric conversion in the United States construction industries. It was made available to attendees at the NIBS Symposium on…

The Future of the National Technical Information Service: Issues and Options.

ERIC Educational Resources Information Center

McClure, Charles R.

In recent years there has been considerable debate about the appropriate role, management structure, and activities for the National Technical Information Service (NTIS). This background paper identifies key issues that require attention by Congress and by NTIS itself to increase the effectiveness of NTIS in the collection and dissemination of…

Vocational and Technical Education in Lebanon: Strategic Issues and Challenges

ERIC Educational Resources Information Center

Karam, Gebran

2006-01-01

The current status of the Lebanese vocational and technical education (VTE) system is assessed and the strategic issues and challenges facing it are identified. In addition to the economic and social challenges that are common to many developing countries, the Lebanese system suffers from idiosyncratic problems, which may require innovative and…

Education and Training. Annotated Bibliography. Author and Subject Index.

ERIC Educational Resources Information Center

United Nations Food and Agriculture Organization, Rome (Italy).

Food and Agriculture Organization (FAO) publications and documents issued by the Human Resources and Institutions division and by other technical divisions in the technical, economic, and social fields are selected, annotated and indexed in this bibliography. Documents issued prior to 1967 are not included but can be found in the Rural…

Peer Review of a Formal Verification/Design Proof Methodology

NASA Technical Reports Server (NTRS)

1983-01-01

The role of formal verification techniques in system validation was examined. The value and the state of the art of performance proving for fault-tolerant compuers were assessed. The investigation, development, and evaluation of performance proving tools were reviewed. The technical issues related to proof methodologies are examined. The technical issues discussed are summarized.

Optimal planning for the sustainable utilization of municipal solid waste.

PubMed

Santibañez-Aguilar, José Ezequiel; Ponce-Ortega, José María; Betzabe González-Campos, J; Serna-González, Medardo; El-Halwagi, Mahmoud M

2013-12-01

The increasing generation of municipal solid waste (MSW) is a major problem particularly for large urban areas with insufficient landfill capacities and inefficient waste management systems. Several options associated to the supply chain for implementing a MSW management system are available, however to determine the optimal solution several technical, economic, environmental and social aspects must be considered. Therefore, this paper proposes a mathematical programming model for the optimal planning of the supply chain associated to the MSW management system to maximize the economic benefit while accounting for technical and environmental issues. The optimization model simultaneously selects the processing technologies and their location, the distribution of wastes from cities as well as the distribution of products to markets. The problem was formulated as a multi-objective mixed-integer linear programing problem to maximize the profit of the supply chain and the amount of recycled wastes, where the results are showed through Pareto curves that tradeoff economic and environmental aspects. The proposed approach is applied to a case study for the west-central part of Mexico to consider the integration of MSW from several cities to yield useful products. The results show that an integrated utilization of MSW can provide economic, environmental and social benefits. Copyright © 2013 Elsevier Ltd. All rights reserved.

New insight into California’s drought through open data

USGS Publications Warehouse

Read, Emily K.; Bucknell, Mary; Hines, Megan K.; Kreft, James M.; Lucido, Jessica M.; Read, Jordan S.; Schroedl, Carl; Sibley, David M.; Stephan, Shirley; Suftin, Ivan; Thongsavanh, Phethala; Van Den Hoek, Jamon; Walker, Jordan I.; Wernimont, Martin R; Winslow, Luke A.; Yan, Andrew N.

2015-01-01

Historically unprecedented drought in California has brought water issues to the forefront of the nation’s attention. Crucial investigations that concern water policy, management, and research, in turn, require extensive information about the quality and quantity of California’s water. Unfortunately, key sources of pertinent data are unevenly distributed and frequently hard to find. Thankfully, the vital importance of integrating water data across federal, state, and tribal, academic, and private entities, has recently been recognized and addressed through federal initiatives such as the Climate Data Initiative of President Obama’s Climate Action Plan and the Advisory Committee on Water Information’sOpen Water Data Initiative. Here, we demonstrate an application of integrated open water data, visualized and made available online using open source software, for the purpose of exploring the impact of the current California drought. Our collaborative approach and technical tools enabled a rapid, distributed development process. Many positive outcomes have resulted: the application received recognition within and outside of the Federal Government, inspired others to visualize open water data, spurred new collaborations for our group, and strengthened the collaborative relationships within the team of developers. In this article, we describe the technical tools and collaborative process that enabled the success of the application. 

Synergistic Airframe-Propulsion Interactions and Integrations: A White Paper Prepared by the 1996-1997 Langley Aeronautics Technical Committee

NASA Technical Reports Server (NTRS)

Yaros, Steven F.; Sexstone, Matthew G.; Huebner, Lawrence D.; Lamar, John E.; McKinley, Robert E., Jr.; Torres, Abel O.; Burley, Casey L.; Scott, Robert C.; Small, William J.

1998-01-01

This white paper addresses the subject of Synergistic Airframe-Propulsion interactions and integrations (SnAPII). The benefits of SnAPII have not been as extensively explored. This is due primarily to the separateness of design process for airframes and propulsion systems, with only unfavorable interactions addressed. The question 'How to design these two systems in such a way that the airframe needs the propulsion and the propulsion needs the airframe?' is the fundamental issue addressed in this paper. Successful solutions to this issue depend on appropriate technology ideas. This paper first details some ten technologies that have yet to make it to commercial products (with limited exceptions) and that could be utilized in a synergistic manner. Then these technologies, either alone or in combination, are applied to both a conventional twin-engine transonic transport and to an unconventional transport, the Blended Wing Body. Lastly, combinations of these technologies are applied to configuration concepts to assess the possibilities of success relative to five of the ten NASA aeronautics goals. These assessments are subjective, but they point the way in which the applied technologies could work together for some break-through benefits.

Application of Simulated Reactivity Feedback in Nonnuclear Testing of a Direct-Drive Gas-Cooled Reactor

NASA Technical Reports Server (NTRS)

Bragg-Sitton, S. M.; Webster, K. L.

2007-01-01

Nonnuclear testing can be a valuable tool in the development of an in-space nuclear power or propulsion system. In a nonnuclear test facility, electric heaters are used to simulate heat from nuclear fuel. Standard testing allows one to fully assess thermal, heat transfer, and stress related attributes of a given system but fails to demonstrate the dynamic response that would be present in an integrated, fueled reactor system. The integration of thermal hydraulic hardware tests with simulated neutronic response provides a bridge between electrically heated testing and full nuclear testing. By implementing a neutronic response model to simulate the dynamic response that would be expected in a fueled reactor system, one can better understand system integration issues, characterize integrated system response times and response and response characteristics, and assess potential design improvements with a relatively small fiscal investment. Initial system dynamic response testing was demonstrated on the integrated SAFE 100a heat pipe cooled, electrically heated reactor and heat exchanger hardware. This Technical Memorandum discusses the status of the planned dynamic test methodology for implementation in the direct-drive gas-cooled reactor testing and assesses the additional instrumentation needed to implement high-fidelity dynamic testing.

78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-13

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. AD13-6-000] Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory... related to the reliability of the Bulk-Power System. A more formal agenda will be issued at a later date...

Initiatives in Technical and Further Education. Numbers 3 and 4.

ERIC Educational Resources Information Center

National TAFE Clearinghouse, Adelaide (Australia).

These two issues contain abstracts of 127 and 118 documents, respectively, related to the field of technical and further education that are available through the Australian Technical and Further Education (TAFE) Clearinghouse system. These types of materials are included: research reports/technical reports, evaluation studies, curriculum materials…

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2010 CFR

2010-10-01

... directive whatever. (d) All technical directions must be issued in writing by the project officer or must be... advise the contractor in writing that, in the contracting officer's opinion, the technical direction is... subject to the technical direction of the NRC project officer. The term technical direction is defined to...

48 CFR 1552.237-71 - Technical direction.

Code of Federal Regulations, 2010 CFR

2010-10-01

.... (d) Technical direction will be issued in writing or confirmed in writing within five (5) days after... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Technical direction. 1552... Technical direction. As prescribed in 1537.110, insert a clause substantially the same as the following...

76 FR 60029 - Notice of Issuance Technical Bulletin 2011-2, Extended Deferral of the Effective Date of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Notice of Issuance Technical Bulletin 2011-2, Extended Deferral of the Effective Date of Technical Bulletin 2006-1 AGENCY: Federal Accounting Standards Advisory... hereby given that the Federal Accounting Standards Advisory Board (FASAB) has issued Technical Bulletin...

Technical and Vocational Education in Nigeria: Issues, Challenges and a Way Forward

ERIC Educational Resources Information Center

Okoye, Reko; Arimonu, Maxwell Onyenwe

2016-01-01

Technical education, as enshrined in the Nigerian national policy on education, is concerned with qualitative technological human resources development directed towards a national pool of skilled and self reliant craftsmen, technicians and technologists in technical and vocational education fields. In Nigeria, the training of technical personnel…

PEP Run Report for Integrated Test A, Caustic Leaching in UFP-VSL-T01A, Oxidative Leaching in UFP-VSL-T02A

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guzman-Leong, Consuelo E.; Bredt, Ofelia P.; Burns, Carolyn A.

2009-12-04

Pacific Northwest National Laboratory (PNNL) was tasked by Bechtel National Inc. (BNI) on the River Protection Project-Hanford Tank Waste Treatment and Immobilization Plant (RPP-WTP) project to perform research and development activities to resolve technical issues identified for the Pretreatment Facility (PTF). The Pretreatment Engineering Platform (PEP) was designed and constructed and operated as part of a plan to respond to issue M12, “Undemonstrated Leaching Processes.”(a) The PEP, located in the Process Engineering Laboratory-West (PDLW) located in Richland, Washington, is a 1/4.5-scale test platform designed to simulate the WTP pretreatment caustic leaching, oxidative leaching, ultrafiltration solids concentration, and slurry washing processes.more » The PEP replicates the WTP leaching processes using prototypic equipment and control strategies. The PEP also includes non-prototypic ancillary equipment to support the core processing.« less

Metropolitian area network services comprised of virtual local area networks running over hybrid fiber-coax and asynchronous transfer mode technologies

NASA Astrophysics Data System (ADS)

Biedron, William S.

1995-11-01

Since 1990 there has been a rapid increase in the demand for communication services, especially local and wide area network (LAN/WAN) oriented services. With the introduction of the DFB laser transmitter, hybrid-fiber-coax (HFC) cable plant designs, ATM transport technologies and rf modems, new LAN/WAN services can now be defined and marketed to residential and business customers over existing cable TV systems. The term metropolitan area network (MAN) can be used to describe this overall network. This paper discusses the technical components needed to provision these services as well as provides some perspectives on integration issues. Architecture at the headend and in the backbone is discussed, as well as specific service definitions and the technology issues associated with each. The TCP/IP protocol is suggested as a primary protocol to be used throughout the MAN.

Solid Waste Management in Nigeria: Problems and Issues.

PubMed

AGUNWAMBA

1998-11-01

/ This paper is a presentation of the problems of solid waste management in Nigeria and certain important issues that must be addressed in order to achieve success. At the core of the problems of solid waste management are the absence of adequate policies, enabling legislation, and an environmentally stimulated and enlightened public. Government policies on the environment are piecemeal where they exist and are poorly implemented. Public enlightenment programs lacked the needed coverage, intensity, and continuity to correct the apathetic public attitude towards the environment. Up to now the activities of the state environmental agencies have been hampered by poor funding, inadequate facilities and human resources, inappropriate technology, and an inequitable taxation system. Successful solid waste management in Nigeria will require a holistic program that will integrate all the technical, economic, social, cultural, and psychological factors that are often ignored in solid waste programs.KEY WORDS: Solid waste; Management; Problems; Solutions; Nigeria

TEXSYS. [a knowledge based system for the Space Station Freedom thermal control system test-bed

NASA Technical Reports Server (NTRS)

Bull, John

1990-01-01

The Systems Autonomy Demonstration Project has recently completed a major test and evaluation of TEXSYS, a knowledge-based system (KBS) which demonstrates real-time control and FDIR for the Space Station Freedom thermal control system test-bed. TEXSYS is the largest KBS ever developed by NASA and offers a unique opportunity for the study of technical issues associated with the use of advanced KBS concepts including: model-based reasoning and diagnosis, quantitative and qualitative reasoning, integrated use of model-based and rule-based representations, temporal reasoning, and scale-up performance issues. TEXSYS represents a major achievement in advanced automation that has the potential to significantly influence Space Station Freedom's design for the thermal control system. An overview of the Systems Autonomy Demonstration Project, the thermal control system test-bed, the TEXSYS architecture, preliminary test results, and thermal domain expert feedback are presented.

Workshop on technology issues of superconducting Maglev transportation systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wegrzyn, J.E.; Shaw, D.T.

1991-09-27

There exists a critical need in the United States to improve its ground transportation system. One suggested system that offers many advantages over the current transportation infrastructure is Maglev. Maglev represents the latest evolution in very high and speed ground transportation, where vehicles are magnetically levitated, guided, and propelled over elevated guideways at speeds of 300 miles per hour. Maglev is not a new concept but is, however, receiving renewed interest. The objective of this workshop was to further promote these interest by bringing together a small group of specialists in Maglev technology to discuss Maglev research needs and tomore » identify key research issues to the development of a successful Maglev system. The workshop was organized into four sessions based on the following technical areas: Materials, Testing, and Shielding; Magnet Design and Cryogenic Systems; Propulsion and Levitation Systems; and, System Control and Integration.« less

Strategies for synchronisation in an evolving telecommunications network

NASA Astrophysics Data System (ADS)

Avery, Rob

1992-06-01

The achievement of precise synchronization in the telecommunications environment is addressed. Transmitting the timing from node to node has been the inherent problem for all digital networks. Traditional network equipment used to transfer synchronization, such as digital switching ststems, adds impairments to the once traceable signal. As the synchronization signals are passed from node to node, they lose stability by passing through intervening clocks. Timing would be an integrated part of all new network and service deployments. New transmission methods, such as the Synchronous Digital Hierarchy (SDH), survivable network topologies and the issues that arise from them, necessitate a review of current network synchronization strategies. Challenges that face the network are itemized. A demonstration of why localized Primary Reference Clocks (PRC) in key nodes and the Synchronization Supply Unit (SSU) clock architecture of transit and local node clocks is a technically and economically viable solution to the issues facing network planners today is given.

Engineering model system study for a regenerative fuel cell: Study report

NASA Technical Reports Server (NTRS)

Chang, B. J.; Schubert, F. H.; Kovach, A. J.; Wynveen, R. A.

1984-01-01

Key design issues of the regenerative fuel cell system concept were studied and a design definition of an alkaline electrolyte based engineering model system or low Earth orbit missions was completed. Definition of key design issues for a regenerative fuel cell system include gaseous reactant storage, shared heat exchangers and high pressure pumps. A power flow diagram for the 75 kW initial space station and the impact of different regenerative fuel cell modular sizes on the total 5 year to orbit weight and volume are determined. System characteristics, an isometric drawing, component sizes and mass and energy balances are determined for the 10 kW engineering model system. An open loop regenerative fuel cell concept is considered for integration of the energy storage system with the life support system of the space station. Technical problems and their solutions, pacing technologies and required developments and demonstrations for the regenerative fuel cell system are defined.

A Plan for Revolutionary Change in Gas Turbine Engine Control System Architecture

NASA Technical Reports Server (NTRS)

Culley, Dennis E.

2011-01-01

The implementation of Distributed Engine Control technology on the gas turbine engine has been a vexing challenge for the controls community. A successful implementation requires the resolution of multiple technical issues in areas such as network communications, power distribution, and system integration, but especially in the area of high temperature electronics. Impeding the achievement has been the lack of a clearly articulated message about the importance of the distributed control technology to future turbine engine system goals and objectives. To resolve these issues and bring the technology to fruition has, and will continue to require, a broad coalition of resources from government, industry, and academia. This presentation will describe the broad challenges facing the next generation of advanced control systems and the plan which is being put into action to successfully implement the technology on the next generation of gas turbine engine systems.

Exercise redox biochemistry: Conceptual, methodological and technical recommendations.

PubMed

Cobley, James N; Close, Graeme L; Bailey, Damian M; Davison, Gareth W

2017-08-01

Exercise redox biochemistry is of considerable interest owing to its translational value in health and disease. However, unaddressed conceptual, methodological and technical issues complicate attempts to unravel how exercise alters redox homeostasis in health and disease. Conceptual issues relate to misunderstandings that arise when the chemical heterogeneity of redox biology is disregarded: which often complicates attempts to use redox-active compounds and assess redox signalling. Further, that oxidised macromolecule adduct levels reflect formation and repair is seldom considered. Methodological and technical issues relate to the use of out-dated assays and/or inappropriate sample preparation techniques that confound biochemical redox analysis. After considering each of the aforementioned issues, we outline how each issue can be resolved and provide a unifying set of recommendations. We specifically recommend that investigators: consider chemical heterogeneity, use redox-active compounds judiciously, abandon flawed assays, carefully prepare samples and assay buffers, consider repair/metabolism, use multiple biomarkers to assess oxidative damage and redox signalling. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

[Obstacle factors in implementation of integrated schistosomiasis prevention and control strategies with emphasis on infectious source in hilly endemic regions].

PubMed

Xu, Jia; Chen, Lin; Zhang, Yi; Wu, Jian-Jun; Wan, Xue-Xiang; Zhu, Rong; Xu, Hui-Rong; Liu, Qing; Huang, Liang; Wu, Zi-Song; Lu, Long-Ting; Zhong, Bo

2013-12-01

To analyze the main obstacles existing in the implementation of integrated schistosomiasis prevention and control strategies with emphasis on infection source in hilly endemic regions, and to find out the current priority issues in schistosomiasis prevention and control, so as to provide the evidence for further solutions. Two typical hilly schistosomiasis endemic regions in Sichuan Province, including Pujiang County of Chengdu City and Dongpo District of Meishan City, were selected as research areas. A framework of obstacle factors in the implementation of integrated schistosomiasis prevention and control strategies with emphasis on infectious source in hilly endemic regions was built by literature review, and the management and technical personnel who worked on schistosomiasis prevention and control in eight different industries (health, agriculture, forestry and so on) and five levels (provincial, city, county, township and village levels) were investigated by questionnaires in the way of nominal group. One hundred and fifty-three management and technical personnel in different industries and different levels were investigated. The questionnaire recovery rate (experts' positive coefficient) was 100%. The results showed that the first four problems needing to be concerned in the implementation of integrated schistosomiasis prevention and control strategies with emphasis on infection source were eliminating Oncomelania hupensis snails by projects, health education, examination and treatment for schistosomiasis persons, and harmless treatment of night-soil and safe water supply. The focuses of two counties in the implementation of integrated strategy measures were different. The harmless treatment of night-soil and safe water supply was the most important measure in Pujiang County, while the elimination of snails by projects was the most in Dong-po District. As the differences in the situation of epidemic areas and the existed condition of the prevention and treatment progress, the comprehensive schistosomiasis control measures should be adjusted according to the local conditions in the implementation of integrated schistosomiasis prevention and control strategies with emphasis on infection source.

Ground Water Technical Considerations during the Five-Year Review Process

EPA Pesticide Factsheets

This issue paper has been developed to highlight technical considerations as well as technical resources available to Remedial Project Managers (RPMs) in conducting Five-Year Reviews (FYRs) at CERCLA1 sites with contaminated groundwater.

Iridium: failures & successes

NASA Astrophysics Data System (ADS)

Christensen, CarissaBryce; Beard, Suzette

2001-03-01

This paper will provide an overview of the Iridium business venture in terms of the challenges faced, the successes achieved, and the causes of the ultimate failure of the venture — bankruptcy and system de-orbit. The paper will address technical, business, and policy issues. The intent of the paper is to provide a balanced and accurate overview of the Iridium experience, to aid future decision-making by policy makers, the business community, and technical experts. Key topics will include the history of the program, the objectives and decision-making of Motorola, the market research and analysis conducted, partnering strategies and their impact, consumer equipment availability, and technical issues — target performance, performance achieved, technical accomplishments, and expected and unexpected technical challenges. The paper will use as sources trade media and business articles on the Iridium program, technical papers and conference presentations, Wall Street analyst's reports, and, where possible, interviews with participants and close observers.

[Problems of X-ray mammology manpower training and management].

PubMed

Rozhkova, N I

2014-01-01

The paper considers the issues of manpower training in X-ray mammology. It mentions staff shortage and no special training, which reduces the efficient activities of X-ray mammographic rooms, as well as shortage of training facilities and no unified educational programs within interdisciplinary integration, inadequate technical equipment in the training facilities, the lack of an accounting system for training higher- and mid-level health workers, as well as engineers. Emphasis is placed on that the educational programs must comply with the organizational forms of testing the specialists to be employed. The introduction of a continuous education system should be accelerated to rule out the decay period of specialists' competence.

NSSDC Conference on Mass Storage Systems and Technologies for Space and Earth Science Applications, volume 1

NASA Technical Reports Server (NTRS)

Kobler, Benjamin (Editor); Hariharan, P. C. (Editor); Blasso, L. G. (Editor)

1992-01-01

Papers and viewgraphs from the conference are presented. This conference served as a broad forum for the discussion of a number of important issues in the field of mass storage systems. Topics include magnetic disk and tape technologies, optical disks and tape, software storage and file management systems, and experiences with the use of a large, distributed storage system. The technical presentations describe, among other things, integrated mass storage systems that are expected to be available commercially. Also included is a series of presentations from Federal Government organizations and research institutions covering their mass storage requirements for the 1990's.

Photovoltaic power conditioning subsystem: State of the art and development opportunities

NASA Technical Reports Server (NTRS)

Krauthamer, S.; Bahrami, K.; Das, R.; Macie, T.; Rippel, W.

1984-01-01

Photovoltaic systems, the state of the art of power conditioning subsystem components, and the design and operational interaction between photovoltaic systems and host utilities are detailed in this document. Major technical issues relating to the design and development of power conditioning systems for photovoltaic application are considered; these include: (1) standards, guidelines, and specifications; (2) cost effective hardware design; (3) impact of advanced components on power conditioning development; (4) protection and safety; (5) quality of power; (6) system efficiency; and (7) system integration with the host utility. Theories of harmonic distortion and reactive power flow are discussed, and information about power conditioner hardware and manufacturers is provided.

Sandia National Laboratories Institutional Plan FY1994--1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-10-01

This report presents a five year plan for the laboratory. This plan takes advantage of the technical strengths of the lab and its staff to address issues of concern to the nation on a scope much broader than Sandia`s original mission, while maintaining the general integrity of the laboratory. The plan proposes initiatives in a number of technologies which overlap the needs of its customers and the strengths of its staff. They include: advanced manufacturing technology; electronics; information and computational technology; transportation energy technology and infrastructure; environmental technology; energy research and technology development; biomedical systems engineering; and post-cold war defensemore » imperatives.« less

A Guide for Curriculum Integration of Academic and Vocational/Technical Education: Why? How?

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education.

School reform increasingly requires curriculum integration of academic and vocational-technical education. The first part of this guidebook presents views held by 17 North Carolina teachers in support of an integrated curriculum at the middle- and high-school levels. Part 2 provides examples of parallel academic and vocational curricula for the…

Technical clarity in inter-agency negotiations: Lessons from four hydropower projects

USGS Publications Warehouse

Burkardt, Nina; Lamb, Berton Lee; Taylor, Jonathan G.; Waddle, Terry J.

1995-01-01

We investigated the effect of technical clarity on success in multi-party negotiations in the Federal Energy Regulatory Commission (FERC) licensing process. Technical clarity is the shared understanding of dimensions such as the geographic extent of the project, range of flows to be considered, important species and life stages, and variety of water uses considered. The results of four hydropower licensing consultations are reported. Key participants were interviewed to ascertain the level of technical clarity present during the consultations and the degree to which the consultations were successful. Technical clarity appears to be a prerequisite for successful outcomes. Factors that enhance technical clarity include simple project design, new rather than existing projects, precise definition of issues, a sense of urgency to reach agreement, a sense of fairness among participants, and consistency in participation. Negotiators should not neglect the critical pre-negotiation steps of defining technical issues and determining appropriate studies, deciding how to interpret studies, and agreeing on responses to study results.

Integrated Measurement of Crew Resource Management and Technical Flying Skills

DOT National Transportation Integrated Search

1993-08-01

This report presents the findings of a study designed with two objectives: to produce a prototype performance : measurement instrument (PMI) that integrates the assessment of Crew Resource Management (CRM) and technical flying : skills and to investi...

Regulatory Issues and Challenges in Developing Seismic Source Characterizations for New Nuclear Power Plant Applications in the US

NASA Astrophysics Data System (ADS)

Fuller, C. W.; Unruh, J.; Lindvall, S.; Lettis, W.

2009-05-01

An integral component of the safety analysis for proposed nuclear power plants within the US is a probabilistic seismic hazard assessment (PSHA). Most applications currently under NRC review followed guidance provided within NRC Regulatory Guide 1.208 (RG 1.208) for developing seismic source characterizations (SSC) for their PSHA. Three key components of RG 1.208 guidance is that applicants should: (1) use existing PSHA models and SSCs accepted by the NRC as SSC as a starting point for their SSCs; (2) evaluate new information and data developed since acceptance of the starting model to determine if the model should be updated; and (3) follow guidelines set forth by the Senior Seismic Hazard Analysis Committee (SSHAC) (NUREG/CR-6372) in developing significant updates (i.e., updates should capture SSC uncertainty through representing the "center, body, and range of technical interpretations" of the informed technical community). Major motivations for following this guidance are to ensure accurate representations of hazard and regulatory stability in hazard estimates for nuclear power plants. All current applications with the NRC have used the EPRI-SOG source characterizations developed in the 1980s as their starting point model, and all applicants have followed RG 1.208 guidance in updating the EPRI- SOG model. However, there has been considerable variability in how applicants have interpreted the guidance, and thus there has been considerable variability in the methodology used in updating the SSCs. Much of the variability can be attributed to how different applicants have interpreted the implications of new data, new interpretations of new and/or old data, and new "opinions" of members of the informed technical community. For example, many applicants and the NRC have wrestled with the challenge of whether or not to update SSCs in light of new opinions or interpretations of older data put forth by one member of the technical community. This challenge has been further complicated by: (1) a given applicant's uncertainty in how to revise the EPRI-SOG model, which was developed using a process similar to that dictated by SSHAC for a level 3 or 4 study, without conducting a resource-intensive SSHAC level 3 or higher study for their respective application; and (2) a lack of guidance from the NRC on acceptable methods of demonstrating that new data, interpretations, and opinions are adequately represented within the EPRI-SOG model. Partly because of these issues, initiative was taken by the nuclear industry, NRC and DOE to develop a new base PSHA model for the central and eastern US. However, this new SSC model will not be completed for several years and does not resolve many of the fundamental regulatory and philosophical issues that have been raised during the current round of applications. To ensure regulatory stability and to provide accurate estimates of hazard for nuclear power plants, a dialog must be started between regulators and industry to resolve these issues. Two key issues that must be discussed are: (1) should new data and new interpretations or opinions of old data be treated differently in updated SSCs, and if so, how?; and (2) how can new data or interpretations developed by a small subset of the technical community be weighed against and potentially combined with a SSC model that was originally developed to capture the "center, body and range" of the technical community?

Utility interface issues for grid-connected photovoltaic systems

NASA Astrophysics Data System (ADS)

Chu, D.; Key, T.; Fitzer, J.

Photovoltaic (PV) balance-of-system research and development has focused on interconnection with the utility grid as the most promising future application for photovoltaic energy production. These sysems must be compatible with the existing utility grid to be accepted. Compatibility encompasses many technical, economic and institutional issues, from lineman safety to revenue metering and power quality. This paper reviews DOE/PV sponsored research for two of the technical interconnection issues: harmonic injection, and power factor control. Explanations and rationale behind these two issues will be reviewed, and the status of current research and plans for required future work will be presented.

75 FR 28610 - Draft EPA's Reanalysis of Key Issues Related to Dioxin Toxicity and Response to NAS Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-21

... SAB will convene an expert panel composed of scientists knowledgeable about technical issues related... consideration. Members of the public who wish to ensure that their technical comments are provided to the SAB... any written public comments that EPA receives in accordance with the detailed instructions provided...

21st Century Educators: Developing and Supporting Great Career and Technical Education Teachers. Special Issues Brief. Revised Edition

ERIC Educational Resources Information Center

Jacques, Catherine; Potemski, Amy

2014-01-01

This Special Issues Brief from the Center on Great Teachers and Leaders (GTL Center) offers insight into three human capital management policies that are critical for career and technical education (CTE) teachers: certification, performance evaluation, and professional development. CTE teachers are uniquely positioned to improve college and career…

INSTITUTE ON CRITICAL ISSUES IN VOCATIONAL AND TECHNICAL TEACHER EDUCATION IN SMALL COLLEGES AND UNIVERSITIES. CENTER SEMINAR AND CONFERENCE REPORT NO. 8.

ERIC Educational Resources Information Center

BELL, A.P.

THIRTY PARTICIPANTS INCLUDING TEACHER EDUCATORS AND ADMINISTRATORS ATTENDED A 2-WEEK TEACHER EDUCATION INSTITUTE DESIGNED TO CONSIDER CRITICAL ISSUES IN VOCATIONAL AND TECHNICAL EDUCATION AND THEIR IMPLICATIONS FOR PROGRAMS OF TEACHER PREPARATION IN SMALL COLLEGES AND UNIVERSITIES. THE PRESENTATIONS BY SPECIAL CONSULTANTS WERE--(1) "CRITICAL…

Terra Populus and DataNet Collaboration

NASA Astrophysics Data System (ADS)

Kugler, T.; Ruggles, S.; Fitch, C. A.; Clark, P. D.; Sobek, M.; Van Riper, D.

2012-12-01

Terra Populus, part of NSF's new DataNet initiative, is developing organizational and technical infrastructure to integrate, preserve, and disseminate data describing changes in the human population and environment over time. Terra Populus will incorporate large microdata and aggregate census datasets from the United States and around the world, as well as land use, land cover, climate and other environmental datasets. These data are widely dispersed, exist in a variety of data structures, have incompatible or inadequate metadata, and have incompatible geographic identifiers. Terra Populus is developing methods of integrating data from different domains and translating across data structures based on spatio-temporal linkages among data contents. The new infrastructure will enable researchers to identify and merge data from heterogeneous sources to study the relationships between human behavior and the natural world. Terra Populus will partner with data archives, data producers, and data users to create a sustainable international organization that will guarantee preservation and access over multiple decades. Terra Populus is also collaborating with the other projects in the DataNet initiative - DataONE, the DataNet Federation Consortium (DFC) and Sustainable Environment-Actionable Data (SEAD). Taken together, the four projects address aspects of the entire data lifecycle, including planning, collection, documentation, discovery, integration, curation, preservation, and collaboration; and encompass a wide range of disciplines including earth sciences, ecology, social sciences, hydrology, oceanography, and engineering. The four projects are pursuing activities to share data, tools, and expertise between pairs of projects as well as collaborating across the DataNet program on issues of cyberinfrastructure and community engagement. Topics to be addressed through program-wide collaboration include technical, organizational, and financial sustainability; semantic integration; data management training and education; and cross-disciplinary awareness of data resources.

Design for reliability: NASA reliability preferred practices for design and test

NASA Technical Reports Server (NTRS)

Lalli, Vincent R.

1994-01-01

This tutorial summarizes reliability experience from both NASA and industry and reflects engineering practices that support current and future civil space programs. These practices were collected from various NASA field centers and were reviewed by a committee of senior technical representatives from the participating centers (members are listed at the end). The material for this tutorial was taken from the publication issued by the NASA Reliability and Maintainability Steering Committee (NASA Reliability Preferred Practices for Design and Test. NASA TM-4322, 1991). Reliability must be an integral part of the systems engineering process. Although both disciplines must be weighed equally with other technical and programmatic demands, the application of sound reliability principles will be the key to the effectiveness and affordability of America's space program. Our space programs have shown that reliability efforts must focus on the design characteristics that affect the frequency of failure. Herein, we emphasize that these identified design characteristics must be controlled by applying conservative engineering principles.

Purpose-driven public sector reform: the need for within-government capacity build for the management of slope stability in communities in the Caribbean.

PubMed

Anderson, Malcolm; Holcombe, Liz

2006-01-01

This article stresses the importance of within-government capacity build as the optimal approach to minimizing landslide risk to the most vulnerable communities in the developing world. Landslide risk is an integrated issue that demands strong managerial leadership and multidisciplinary inclusion to develop structures that deliver sustainable improvements in the reduction of risk. The tension between projects demanding international technical and financial intervention and those capable of "within-country" solutions are examined. More particularly, the challenges of developing a management methodology capable of energizing inter-ministry collaboration to achieve community-level action is examined in the context of a recently established program of slope stability management in St. Lucia. The program, Management of Slope Stability in Communities (MoSSaiC), is shown to have successfully fostered not only extensive technical collaboration within government but also to have energized local communities in the shared mission of capacity build through their direct involvement in the management process.

Energy Levels and Co-evolution of Product Innovation in Supply Chain Clusters

NASA Astrophysics Data System (ADS)

Ji, Guojun

In the last decade supply chain clusters phenomenon has emerged as a new approach in product innovation studies. This article makes three contributions to the approach by addressing some open issues. The first contribution is to explicitly incorporate the energy levels in the analysis. Hence, the unit of analysis is widened from sectoral systems of innovation to socio-technical systems. Hence, the unit of analysis is widened from sectoral systems of innovation to socio-technical systems. The second contribution is to suggest an analytical distinction between different evolution method, actors involved in them, and the institutions which guide actor's perceptions and activities. Thirdly, the article opens up the black box of institutions, making them an integral part of supply chain. The article provides a coherent conceptual multi-level perspective, using insights from sociology, institutional theory and innovation studies. The perspective is particularly useful to analyze long-term dynamics supply chain clusters phenomenon, shifts from one energy level to another and the co-evolution of product innovation.

Purpose-Driven Public Sector Reform: The Need for Within-Government Capacity Build for the Management of Slope Stability in Communities in the Caribbean

NASA Astrophysics Data System (ADS)

Anderson, Malcolm; Holcombe, Liz

2006-01-01

This article stresses the importance of within-government capacity build as the optimal approach to minimizing landslide risk to the most vulnerable communities in the developing world. Landslide risk is an integrated issue that demands strong managerial leadership and multidisciplinary inclusion to develop structures that deliver sustainable improvements in the reduction of risk. The tension between projects demanding international technical and financial intervention and those capable of “within-country” solutions are examined. More particularly, the challenges of developing a management methodology capable of energizing inter-ministry collaboration to achieve community-level action is examined in the context of a recently established program of slope stability management in St. Lucia. The program, Management of Slope Stability in Communities (MoSSaiC), is shown to have successfully fostered not only extensive technical collaboration within government but also to have energized local communities in the shared mission of capacity build through their direct involvement in the management process.

Crowd Sourcing for Challenging Technical Problems and Business Model

NASA Technical Reports Server (NTRS)

Davis, Jeffrey R.; Richard, Elizabeth

2011-01-01

Crowd sourcing may be defined as the act of outsourcing tasks that are traditionally performed by an employee or contractor to an undefined, generally large group of people or community (a crowd) in the form of an open call. The open call may be issued by an organization wishing to find a solution to a particular problem or complete a task, or by an open innovation service provider on behalf of that organization. In 2008, the Space Life Sciences Directorate (SLSD), with the support of Wyle Integrated Science and Engineering, established and implemented pilot projects in open innovation (crowd sourcing) to determine if these new internet-based platforms could indeed find solutions to difficult technical challenges. These unsolved technical problems were converted to problem statements, also called "Challenges" or "Technical Needs" by the various open innovation service providers, and were then posted externally to seek solutions. In addition, an open call was issued internally to NASA employees Agency wide (10 Field Centers and NASA HQ) using an open innovation service provider crowd sourcing platform to post NASA challenges from each Center for the others to propose solutions). From 2008 to 2010, the SLSD issued 34 challenges, 14 externally and 20 internally. The 14 external problems or challenges were posted through three different vendors: InnoCentive, Yet2.com and TopCoder. The 20 internal challenges were conducted using the InnoCentive crowd sourcing platform designed for internal use by an organization. This platform was customized for NASA use and promoted as NASA@Work. The results were significant. Of the seven InnoCentive external challenges, two full and five partial awards were made in complex technical areas such as predicting solar flares and long-duration food packaging. Similarly, the TopCoder challenge yielded an optimization algorithm for designing a lunar medical kit. The Yet2.com challenges yielded many new industry and academic contacts in bone imaging, microbial detection and even the use of pharmaceuticals for radiation protection. The internal challenges through NASA@Work drew over 6000 participants across all NASA centers. Challenges conducted by each NASA center elicited ideas and solutions from several other NASA centers and demonstrated rapid and efficient participation from employees at multiple centers to contribute to problem solving. Finally, on January 19, 2011, the SLSD conducted a workshop on open collaboration and innovation strategies and best practices through the newly established NASA Human Health and Performance Center (NHHPC). Initial projects will be described leading to a new business model for SLSD.

A Cross-site Qualitative Study of Physician Order Entry

PubMed Central

Ash, Joan S.; Gorman, Paul N.; Lavelle, Mary; Payne, Thomas H.; Massaro, Thomas A.; Frantz, Gerri L.; Lyman, Jason A.

2003-01-01

Objective: To describe the perceptions of diverse professionals involved in computerized physician order entry (POE) at sites where POE has been successfully implemented and to identify differences between teaching and nonteaching hospitals. Design: A multidisciplinary team used observation, focus groups, and interviews with clinical, administrative, and information technology staff to gather data at three sites. Field notes and transcripts were coded using an inductive approach to identify patterns and themes in the data. Measurements: Patterns and themes concerning perceptions of POE were identified. Results: Four high-level themes were identified: (1) organizational issues such as collaboration, pride, culture, power, politics, and control; (2) clinical and professional issues involving adaptation to local practices, preferences, and policies; (3) technical/implementation issues, including usability, time, training and support; and (4) issues related to the organization of information and knowledge, such as system rigidity and integration. Relevant differences between teaching and nonteaching hospitals include extent of collaboration, staff longevity, and organizational missions. Conclusion: An organizational culture characterized by collaboration and trust and an ongoing process that includes active clinician engagement in adaptation of the technology were important elements in successful implementation of physician order entry at the institutions that we studied. PMID:12595408

Evolving the Land Information System into a Cloud Computing Service

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houser, Paul R.

The Land Information System (LIS) was developed to use advanced flexible land surface modeling and data assimilation frameworks to integrate extremely large satellite- and ground-based observations with advanced land surface models to produce continuous high-resolution fields of land surface states and fluxes. The resulting fields are extremely useful for drought and flood assessment, agricultural planning, disaster management, weather and climate forecasting, water resources assessment, and the like. We envisioned transforming the LIS modeling system into a scientific cloud computing-aware web and data service that would allow clients to easily setup and configure for use in addressing large water management issues.more » The focus of this Phase 1 project was to determine the scientific, technical, commercial merit and feasibility of the proposed LIS-cloud innovations that are currently barriers to broad LIS applicability. We (a) quantified the barriers to broad LIS utility and commercialization (high performance computing, big data, user interface, and licensing issues); (b) designed the proposed LIS-cloud web service, model-data interface, database services, and user interfaces; (c) constructed a prototype LIS user interface including abstractions for simulation control, visualization, and data interaction, (d) used the prototype to conduct a market analysis and survey to determine potential market size and competition, (e) identified LIS software licensing and copyright limitations and developed solutions, and (f) developed a business plan for development and marketing of the LIS-cloud innovation. While some significant feasibility issues were found in the LIS licensing, overall a high degree of LIS-cloud technical feasibility was found.« less

LANDFILL GAS ENERGY UTILIZATION EXPERIENCE: DISCUSSION OF TECHNICAL AND NON-TECHNICAL ISSUES, SOLUTIONS, AND TRENDS

EPA Science Inventory

The report discusses technical and non-technical considerations associated with the development and operation of landfill gas to energy projects. Much of the report is based on interviews and site visits with the major developers and operators of the more than 110 projects in the...

Joint Integration Office Independent Review Committee annual report, 1985

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Comprised of seven persons with extensive experience in the issues of nuclear waste, the Independent Review Committee (IRC) provides independent and objective review of Defense Transuranic Waste Program (DTWP) activities managed by the Joint Integration Office (JIO), formerly the Defense Transuranic Waste Lead Organization (TLO). The Committee is ensured a broad, interdisciplinary perspective since its membership includes representatives from the fields of nuclear engineering, nuclear waste transportation, industrial quality control, systems and environmental engineering and state and local government. The scope of IRC activities includes overall review of specific TLO plans, projects and activities, and technical review of particular researchmore » and development projects. The Committee makes specific suggestions and recommendations based upon expertise in the field of TRU Waste Management. The IRC operates as a consulting group, under an independent charter providing objective review of program activities. This report summarizes the 12 major topics reviewed by the committee during 1985.« less

The Future of Low-Carbon Electricity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greenblatt, Jeffery B.; Brown, Nicholas R.; Slaybaugh, Rachel

Here, we review future global demand for electricity and major technologies positioned to supply itwith minimal greenhouse gas (GHG) emissions: renewables (wind, solar, water, geothermal and biomass), nuclear fission, and fossil power with CO 2 capture and sequestration. Two breakthrough technologies (space solar power and nuclear fusion) are discussed as exciting but uncertain additional options for low net GHG emissions (“low-carbon”) electricity generation. Grid integration technologies (monitoring and forecasting of transmission and distribution systems, demand-side load management, energy storage, and load balancing with low-carbon fuel substitutes) are also discussed. For each topic, recent historical trends and future prospects are reviewed,more » along with technical challenges, costs and other issues as appropriate. While no technology represents an ideal solution, their strengths can be enhanced by deployment in combination, along with grid integration that forms a critical set of enabling technologies to assure a reliable and robust future low-carbon electricity system.« less

The Future of Low-Carbon Electricity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greenblatt, Jeffery B.; Brown, Nicholas R.; Slaybaugh, Rachel

We review future global demand for electricity and major technologies positioned to supply it with minimal greenhouse gas (GHG) emissions: renewables (wind, solar, water, geothermal, and biomass), nuclear fission, and fossil power with CO2 capture and sequestration. We discuss two breakthrough technologies (space solar power and nuclear fusion) as exciting but uncertain additional options for low-net GHG emissions (i.e., low-carbon) electricity generation. In addition, we discuss grid integration technologies (monitoring and forecasting of transmission and distribution systems, demand-side load management, energy storage, and load balancing with low-carbon fuel substitutes). For each topic, recent historical trends and future prospects are reviewed,more » along with technical challenges, costs, and other issues as appropriate. Although no technology represents an ideal solution, their strengths can be enhanced by deployment in combination, along with grid integration that forms a critical set of enabling technologies to assure a reliable and robust future low-carbon electricity system.« less

The Future of Low-Carbon Electricity

DOE PAGES

Greenblatt, Jeffery B.; Brown, Nicholas R.; Slaybaugh, Rachel; ...

2017-07-10

Here, we review future global demand for electricity and major technologies positioned to supply itwith minimal greenhouse gas (GHG) emissions: renewables (wind, solar, water, geothermal and biomass), nuclear fission, and fossil power with CO 2 capture and sequestration. Two breakthrough technologies (space solar power and nuclear fusion) are discussed as exciting but uncertain additional options for low net GHG emissions (“low-carbon”) electricity generation. Grid integration technologies (monitoring and forecasting of transmission and distribution systems, demand-side load management, energy storage, and load balancing with low-carbon fuel substitutes) are also discussed. For each topic, recent historical trends and future prospects are reviewed,more » along with technical challenges, costs and other issues as appropriate. While no technology represents an ideal solution, their strengths can be enhanced by deployment in combination, along with grid integration that forms a critical set of enabling technologies to assure a reliable and robust future low-carbon electricity system.« less

Systems Engineering and Integration (SE and I)

NASA Technical Reports Server (NTRS)

Chevers, ED; Haley, Sam

1990-01-01

The issue of technology advancement and future space transportation vehicles is addressed. The challenge is to develop systems which can be evolved and improved in small incremental steps where each increment reduces present cost, improves, reliability, or does neither but sets the stage for a second incremental upgrade that does. Future requirements are interface standards for commercial off the shelf products to aid in the development of integrated facilities; enhanced automated code generation system slightly coupled to specification and design documentation; modeling tools that support data flow analysis; and shared project data bases consisting of technical characteristics cast information, measurement parameters, and reusable software programs. Topics addressed include: advanced avionics development strategy; risk analysis and management; tool quality management; low cost avionics; cost estimation and benefits; computer aided software engineering; computer systems and software safety; system testability; and advanced avionics laboratories - and rapid prototyping. This presentation is represented by viewgraphs only.

Position and speed control of brushless DC motors using sensorless techniques and application trends.

PubMed

Gamazo-Real, José Carlos; Vázquez-Sánchez, Ernesto; Gómez-Gil, Jaime

2010-01-01

This paper provides a technical review of position and speed sensorless methods for controlling Brushless Direct Current (BLDC) motor drives, including the background analysis using sensors, limitations and advances. The performance and reliability of BLDC motor drivers have been improved because the conventional control and sensing techniques have been improved through sensorless technology. Then, in this paper sensorless advances are reviewed and recent developments in this area are introduced with their inherent advantages and drawbacks, including the analysis of practical implementation issues and applications. The study includes a deep overview of state-of-the-art back-EMF sensing methods, which includes Terminal Voltage Sensing, Third Harmonic Voltage Integration, Terminal Current Sensing, Back-EMF Integration and PWM strategies. Also, the most relevant techniques based on estimation and models are briefly analysed, such as Sliding-mode Observer, Extended Kalman Filter, Model Reference Adaptive System, Adaptive observers (Full-order and Pseudoreduced-order) and Artificial Neural Networks.

Enterprise-wide implementation of digital radiography in oral and maxillofacial imaging: the University of Florida Dentistry System.

PubMed

Nair, Madhu K; Pettigrew, James C; Loomis, Jeffrey S; Bates, Robert E; Kostewicz, Stephen; Robinson, Boyd; Sweitzer, Jean; Dolan, Teresa A

2009-06-01

The implementation of digital radiography in dentistry in a large healthcare enterprise setting is discussed. A distinct need for a dedicated dental picture archiving and communication systems (PACS) exists for seamless integration of different vendor products across the system. Complex issues are contended with as each clinical department migrated to a digital environment with unique needs and workflow patterns. The University of Florida has had a dental PACS installed over 2 years ago. This paper describes the process of conversion from film-based imaging from the planning stages through clinical implementation. Dentistry poses many unique challenges as it strives to achieve better integration with systems primarily designed for imaging; however, the technical requirements for high-resolution image capture in dentistry far exceed those in medicine, as most routine dental diagnostic tasks are challenging. The significance of specification, evaluation, vendor selection, installation, trial runs, training, and phased clinical implementation is emphasized.

Integrating information on substance use disorders into electronic health record systems.

PubMed

Tai, Betty; McLellan, A Thomas

2012-07-01

For reasons of safety and effectiveness, many forces in health care, especially the Affordable Care Act of 2010, are pressing for improved identification and management of substance use disorders within mainstream health care. Thus, standard information about patient substance use will have to be collected and used by providers within electronic health record systems (EHRS). Although there are many important technical, legal, and patient confidentiality issues that must be dealt with to achieve integration, this article focuses upon efforts by the National Institute on Drug Abuse and other federal agencies to develop a common set of core questions to screen, diagnose, and initiate treatment for substance use disorders as part of national EHRS. This article discusses the background and rationale for these efforts and presents the work to date to identify the questions and to promote information sharing among health care providers. Published by Elsevier Inc.

Integrating Information on Substance Use Disorders Into Electronic Health Record Systems

PubMed Central

Tai, Betty; McLellan, A Thomas

2011-01-01

For reasons of safety and effectiveness many forces in healthcare, especially the Affordable Care Act of 2010, are pressing for improved identification and management of substance use disorders within mainstream healthcare. Thus, standard information about patient substance use will have to be collected and utilized by providers within electronic health record systems (EHRS). While there are many important technical, legal and patient confidentiality issues that must be dealt with to achieve integration, this paper focuses upon efforts by the National Institute on Drug Abuse and other federal agencies to develop a common set of core questions to screen, diagnose and initiate treatment for substance use disorders as part of a national EHRS. This paper discusses the background and rationale for these efforts and presents the work to date to identify the questions and to promote information sharing among health care providers. PMID:22154827

Improving robot arm control for safe and robust haptic cooperation in orthopaedic procedures.

PubMed

Cruces, R A Castillo; Wahrburg, J

2007-12-01

This paper presents the ongoing results of an effort to achieve the integration of a navigated cooperative robotic arm into computer-assisted orthopaedic surgery. A seamless integration requires the system acting in direct cooperation with the surgeon instead of replacing him. Two technical issues are discussed to improve the haptic operating modes for interactive robot guidance. The concept of virtual fixtures is used to restrict the range of motion of the robot according to pre-operatively defined constraints, and methodologies to assure a robust and accurate motion through singular arm configurations are investigated. A new method for handling singularities is proposed, which is superior to the commonly used damped-least-squares method. It produces no deviations of the end-effector in relation to the virtually constrained path. A solution to assure a good performance of a hands-on robotic arm at singularity configurations is proposed. (c) 2007 John Wiley & Sons, Ltd.

Delaware GK-12: Improvement of Science Education in Vocational Technical High Schools Through Collaborative Learning and Coteaching

NASA Astrophysics Data System (ADS)

Madsen, J.; Skalak, K.; Watson, G.; Scantlebury, K.; Allen, D.; Quillen, A.

2006-12-01

With funding from the National Science Foundation, the University of Delaware (UD) in partnership with the New Castle County Vocational Technical School District (NCCoVoTech) in Delaware has initiated a GK-12 Program. In each of year this program, nine full time UD graduate students in the sciences, who have completed all or most of their coursework, will be selected to serve as fellows. Participation in the GK-12 program benefits the graduate fellows in many ways. In addition to gaining general insight into current issues of science education, the fellows enhance their experience as scientific researchers by directly improving their ability to effectively communicate complex quantitative and technical knowledge to an audience with multiple and diverse learning needs. In the first year of this project, fellows have been paired with high school science teachers from NCCoVoTech. These pairs, along with the principal investigators (PIs) of this program have formed a learning community that is taking this opportunity to examine and to reflect on current issues in science education while specifically addressing critical needs in teaching science in vocational technical high schools. By participating in summer workshops and follow-up meetings facilitated by the PIs, the fellows have been introduced to a number of innovative teaching strategies including problem-based learning (PBL). Fellow/teacher pairs have begun to develop and teach PBL activities that are in agreement with State of Delaware science standards and that support student learning through inquiry. Fellows also have the opportunity to engage in coteaching with their teacher partner. In this "teaching at the elbow of another", fellows will gain a better understanding of and appreciation for the complexities and nuances of teaching science in vocational technical high schools. While not taught as a stand-alone course in NCCoVoTech high schools, earth science topics are integrated into the science curriculum at nearly all levels from the freshman through the senior year. Three of the current group of nine fellows are engaged in Ph.D.-level research within the disciplines of astronomy and hydrology. They will bring this expertise into their collaboration with their practicing teachers with the goal of improving the understanding of earth science topics by high school students within a vocational technical school setting.

Modeling Collaboration and Partnership in a Program Integrating NMR across the Chemistry Curriculum at a University and a Community and Technical College

ERIC Educational Resources Information Center

Webb, Cathleen; Dahl, Darwin; Pesterfield, Lester; Lovell, Donielle; Zhang, Rui; Ballard, Sue; Kellie, Shawn

2013-01-01

In this NSF-supported project, two Anasazi FT-NMRs are being integrated simultaneously across the chemistry curriculum at Western Kentucky University (WKU) and Elizabethtown Community and Technical College (ECTC). The collaborative project adds to a new curriculum initiative by integrating NMR throughout the chemistry curriculum to enhance both…

Integrating community-based verbal autopsy into civil registration and vital statistics (CRVS): system-level considerations

PubMed Central

de Savigny, Don; Riley, Ian; Chandramohan, Daniel; Odhiambo, Frank; Nichols, Erin; Notzon, Sam; AbouZahr, Carla; Mitra, Raj; Cobos Muñoz, Daniel; Firth, Sonja; Maire, Nicolas; Sankoh, Osman; Bronson, Gay; Setel, Philip; Byass, Peter; Jakob, Robert; Boerma, Ties; Lopez, Alan D.

2017-01-01

ABSTRACT Background: Reliable and representative cause of death (COD) statistics are essential to inform public health policy, respond to emerging health needs, and document progress towards Sustainable Development Goals. However, less than one-third of deaths worldwide are assigned a cause. Civil registration and vital statistics (CRVS) systems in low- and lower-middle-income countries are failing to provide timely, complete and accurate vital statistics, and it will still be some time before they can provide physician-certified COD for every death. Proposals: Verbal autopsy (VA) is a method to ascertain the probable COD and, although imperfect, it is the best alternative in the absence of medical certification. There is extensive experience with VA in research settings but only a few examples of its use on a large scale. Data collection using electronic questionnaires on mobile devices and computer algorithms to analyse responses and estimate probable COD have increased the potential for VA to be routinely applied in CRVS systems. However, a number of CRVS and health system integration issues should be considered in planning, piloting and implementing a system-wide intervention such as VA. These include addressing the multiplicity of stakeholders and sub-systems involved, integration with existing CRVS work processes and information flows, linking VA results to civil registration records, information technology requirements and data quality assurance. Conclusions: Integrating VA within CRVS systems is not simply a technical undertaking. It will have profound system-wide effects that should be carefully considered when planning for an effective implementation. This paper identifies and discusses the major system-level issues and emerging practices, provides a planning checklist of system-level considerations and proposes an overview for how VA can be integrated into routine CRVS systems. PMID:28137194

Integrated corridor management initiative : demonstration phase evaluation – Dallas technical capability analysis test plan.

DOT National Transportation Integrated Search

2012-08-01

This report presents the test plan for conducting the Technical Capability Analysis for the United States Department of Transportation (U.S. DOT) evaluation of the Dallas U.S. 75 Integrated Corridor Management (ICM) Initiative Demonstration. The ICM ...

77 FR 39552 - Self-Regulatory Organizations; NASDAQ OMX BX, Inc.; Order Approving a Proposed Rule Change With...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

... Exchange or NASDAQ Execution Services To Cancel Orders When a Technical or Systems Issue Occurs and To... the authority of BX or NASDAQ Execution Services (``NES'') to cancel orders when a technical or... issue may occur at BX, NES, or a routing destination that causes BX or NES to cancel orders, if BX or...

[White House Conference on Aging, 1981. Research in Aging. Report and Executive Summary of the Technical Committee.

ERIC Educational Resources Information Center

Birren, James E.; And Others

This Technical Committee Report provides an overview and historical sketch of research in aging and proposes a need for new knowledge. An examination of key issues notes the difficulty in assigning priority to research topics, and identifies emerging issues of public concern including: (1) physical health (alcohol and drugs, falls and accidents,…

75 FR 35800 - Draft EPA's Reanalysis of Key Issues Related to Dioxin Toxicity and Response to NAS Comments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-23

... FR 28610). Written comments on the draft report were to be submitted to EPA by August 19, 2010 (a 90... review. The SAB will convene an expert panel composed of scientists knowledgeable about technical issues... for their consideration. Members of the public who wish to ensure that their technical comments are...

AgRISTARS documents tracking list report

NASA Technical Reports Server (NTRS)

Hawkins, J. L.

1982-01-01

A quarterly listing of those documents and related publications that have been issued and placed in the AgRISTARS tracking system is presented. The Tracking List Report provides a catalog, by project, of technical publications arranged by type of document and gives the reference AgRISTARS document numbers, title and date of publication, the issuing organization, and the National Technical Information Service reference number.

77 FR 28375 - Dixie Pipeline Company LLC; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

....1.0.\\1\\ The technical conference will address the issues raised by the protesters in the proceeding and the issues discussed by the Commission in P 19 of the April 27, 2012 order concerning the effect... conference on Wednesday, May 30, 2012, at 9:00 a.m. (EDT), in a room to be designated at the offices of the...

Assessment of continuous acoustic respiratory rate monitoring as an addition to a pulse oximetry-based patient surveillance system.

PubMed

McGrath, Susan P; Pyke, Joshua; Taenzer, Andreas H

2017-06-01

Technology advances make it possible to consider continuous acoustic respiratory rate monitoring as an integral component of physiologic surveillance systems. This study explores technical and logistical aspects of augmenting pulse oximetry-based patient surveillance systems with continuous respiratory rate monitoring and offers some insight into the impact on patient deterioration detection that may result. Acoustic respiratory rate sensors were introduced to a general care pulse oximetry-based surveillance system with respiratory rate alarms deactivated. Simulation was used after 4324 patient days to determine appropriate alarm thresholds for respiratory rate, which were then activated. Data were collected for an additional 4382 patient days. Physiologic parameters, alarm data, sensor utilization and patient/staff feedback were collected throughout the study and analyzed. No notable technical or workflow issues were observed. Sensor utilization was 57 %, with patient refusal leading reasons for nonuse (22.7 %). With respiratory rate alarm thresholds set to 6 and 40 breaths/min., the majority of nurse pager clinical notifications were triggered by low oxygen saturation values (43 %), followed by low respiratory rate values (21 %) and low pulse rate values (13 %). Mean respiratory rate collected was 16.6 ± 3.8 breaths/min. The vast majority (82 %) of low oxygen saturation states coincided with normal respiration rates of 12-20 breaths/min. Continuous respiratory rate monitoring can be successfully added to a pulse oximetry-based surveillance system without significant technical, logistical or workflow issues and is moderately well-tolerated by patients. Respiratory rate sensor alarms did not significantly impact overall system alarm burden. Respiratory rate and oxygen saturation distributions suggest adding continuous respiratory rate monitoring to a pulse oximetry-based surveillance system may not significantly improve patient deterioration detection.

A Compact Bulk Acousto-Optic Time Integrating Correlator.

DTIC Science & Technology

1984-11-01

AD-A156 668 A COMPACT BULK ACOUSTO - OPTIC TIME INTEGRATING 1/1 CORRELATOR(U) ELECTRONICS RESEARCH LAB ADELAIDE (AUSTRALIA) D A FOGG NOV 84 ERL-9323-TR...DEFENCE RESEARCH CENTRE SALISBURY SOUTH AUSTRALIA TECHNICAL REPORT ER L-0323-TR A COMPACT BULK ACOUSTO - OPTIC TIME INTEGRATING CORRELATOR D.A.B. FOGG...LABORATORY TECHNICAL REPORT ERL-0323-TR A COMPACT BULK ACOUSTO - OPTIC TIME INTEGRATING CORRELATOR D.A.B. Fogg SUMMARY This report describes the design and

Planetary mapping—The datamodel's perspective and GIS framework

NASA Astrophysics Data System (ADS)

van Gasselt, S.; Nass, A.

2011-09-01

Demands for a broad range of integrated geospatial data-analysis tools and methods for planetary data organization have been growing considerably since the late 1990s when a plethora of missions equipped with new instruments entered planetary orbits or landed on the surface. They sent back terabytes of new data which soon became accessible for the scientific community and public and which needed to be organized. On the terrestrial side, issues of data access, organization and utilization for scientific and economic analyses are handled by using a range of well-established geographic information systems (GIS) that also found their way into the field of planetary sciences in the late 1990s. We here address key issues concerning the field of planetary mapping by making use of established GIS environments and discuss methods of addressing data organization and mapping requirements by using an easily integrable datamodel that is - for the time being - designed as file-geodatabase (FileGDB) environment in ESRI's ArcGIS. A major design-driving requirement for this datamodel is its extensibility and scalability for growing scientific as well as technical needs, e.g., the utilization of such a datamodel for surface mapping of different planetary objects as defined by their respective reference system and by using different instrument data. Furthermore, it is a major goal to construct a generic model which allows to perform combined geologic as well as geomorphologic mapping tasks making use of international standards without loss of information and by maintaining topologic integrity. An integration of such a datamodel within a geospatial DBMS context can practically be performed by individuals as well as groups without having to deal with the details of administrative tasks and data ingestion issues. Besides the actual mapping, key components of such a mapping datamodel deal with the organization and search for image-sensor data and previous mapping efforts, as well as the proper organization of cartographic representations and assignments of geologic/geomorphologic units within their stratigraphic context.

1992

EPA Science Inventory

There are two classes of statistical issues: firm issues amenable to problem statement and technical resolution and soft issues that have qualitative dimensions and ideological implications. irm issues are easy: defining and stating the problem is much of the solution. he soft is...

Technical and Vocational Training.

ERIC Educational Resources Information Center

Vocational Training, 1993

1993-01-01

This issue focuses on the various forms that secondary technical and vocational education takes in different European Community Member States. "The Future for Skilled Workers" is an interview with Burkart Lutz, a German researcher. Other articles are as follows: "Contradictions in Technical and Vocational Education: The…

75 FR 33682 - Export Administration Regulations; Technical Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-15

...-01] RIN 0694-AE93 Export Administration Regulations; Technical Amendments AGENCY: Bureau of Industry... Bureau of Industry and Security (BIS) makes a technical amendment to the Export Administration... review of final decisions and orders issued in BIS export control administrative enforcement proceedings...

77 FR 53886 - February 2011 Southwest Cold Weather Event Follow-up Technical Conference; Notice of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-04

... Southwest Cold Weather Event Follow-up Technical Conference; Notice of Technical Conference Take notice that... August 16, 2011 Report on Outages and Curtailments During the Southwest Cold Weather Event of February 1... severe cold weather issues that led to rolling blackouts affecting over 4 million customers and natural...

STEM integration in middle school career and technical education programs: A Delphi design study

NASA Astrophysics Data System (ADS)

Wu-Rorrer, Billy Ray

The purpose of this qualitative method study with a Delphi research design sought to determine how STEM programs can be effectively integrated into middle school career and technical education programs by local, state, and national educators, administrators, directors, specialists, and curriculum writers. The significance of the study is to provide leaders in CTE with a greater awareness, insight, and strategies about how CTE programs can more effectively integrate academics into career and technical education programs through STEM-related programming. The findings will increase the limited amount of available literature providing best practice strategies for the integration of STEM curriculum into middle school CTE programs. One basic question has guided this research: How can STEM programs be effectively integrated into middle school career and technical education programs? A total of twelve strategies were identified. The strategies of real-world applications and administrative buy-in were the two predominant strategies consistently addressed throughout the review of literature and all three sub-questions in the research study. The Delphi design study consisted of pilot round and three rounds of data collection on barriers, strategies, and professional development for STEM integration in middle school career and technical education programs. Four panelists participated in the pilot round, and 16 panel members not involved in the pilot round participated in the three rounds of questioning and consensus building. In the future, more comprehensive studies can build upon this foundational investigation of middle school CTE programs.

Integrating Science with Technical and Vocational Areas.

ERIC Educational Resources Information Center

Snyder, Larry; Shreckengast, Craig

This guide presents learning activities and lesson plans that integrate science with technical and vocational areas. Activities and plans are organized under broad headings such as Environmental Science and Acid Rain Research; Criminal Justice, Chemistry, and Narcotics; Children's Education and Services; Cosmetology; and Health Professions.…

Technical Assistance to Brownfields Communities

EPA Pesticide Factsheets

This notice announces the availability of funds and solicits proposals from eligible entities (including eligible non-profit organizations) to provide technical assistance to communities on brownfields issues.

40 CFR 35.4190 - How does my group identify a qualified technical advisor?

Code of Federal Regulations, 2011 CFR

2011-07-01

... issues or public health issues as those issues relate to hazardous substance/toxic waste issues, as... public health issues must have received his or her public health or related training at accredited... hazardous or toxic waste problems, relocation, redevelopment or public health issues, and communicating...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tagestad, Jerry D.; Bolte, John; Guzy, Michael

During this final year of the Pacific Northwest Regional Collaboratory we focused significantly on continuing the relationship between technical teams and government end-users. The main theme of the year was integration. This took the form of data integration via our web portal and integration of our technologies with the end users. The PNWRC's technical portfolio is based on EOS strategies, and focuses on 'applications of national priority: water management, invasive species, coastal management and ecological forecasting.' The products of our technical approaches have been well received by the community of focused end-users. The objective this year was to broaden thatmore » community and develop external support to continue and operationalize product development.« less

NATIONAL RESPONSE TEAM TECHNICAL ASSISTANCE ...

EPA Pesticide Factsheets

This document provides technical information on a wide range of activities to aid in response to intentional release of anthrax in urban environments. It includes initial actions when a potential release is discovered, health and safety issues for responders, sampling and analysis methods, decontamination technologies, decontamination waste disposal, and communication with public. This document provides technical information on a wide range of activities to aid in response to intentional release of anthrax in urban environments. It includes initial actions when a potential release is discovered, health and safety issues for responders, sampling and analysis methods, decontamination technologies, decontamination waste disposal, and communication with public.

Virtual Reality Simulation for the Operating Room

PubMed Central

Gallagher, Anthony G.; Ritter, E Matt; Champion, Howard; Higgins, Gerald; Fried, Marvin P.; Moses, Gerald; Smith, C Daniel; Satava, Richard M.

2005-01-01

Summary Background Data: To inform surgeons about the practical issues to be considered for successful integration of virtual reality simulation into a surgical training program. The learning and practice of minimally invasive surgery (MIS) makes unique demands on surgical training programs. A decade ago Satava proposed virtual reality (VR) surgical simulation as a solution for this problem. Only recently have robust scientific studies supported that vision Methods: A review of the surgical education, human-factor, and psychology literature to identify important factors which will impinge on the successful integration of VR training into a surgical training program. Results: VR is more likely to be successful if it is systematically integrated into a well-thought-out education and training program which objectively assesses technical skills improvement proximate to the learning experience. Validated performance metrics should be relevant to the surgical task being trained but in general will require trainees to reach an objectively determined proficiency criterion, based on tightly defined metrics and perform at this level consistently. VR training is more likely to be successful if the training schedule takes place on an interval basis rather than massed into a short period of extensive practice. High-fidelity VR simulations will confer the greatest skills transfer to the in vivo surgical situation, but less expensive VR trainers will also lead to considerably improved skills generalizations. Conclusions: VR for improved performance of MIS is now a reality. However, VR is only a training tool that must be thoughtfully introduced into a surgical training curriculum for it to successfully improve surgical technical skills. PMID:15650649

Providing Services to Virtual Patrons.

ERIC Educational Resources Information Center

Hulshof, Robert

1999-01-01

Discusses the types of services libraries need to support patrons who access the library via the Internet or e-mail. Highlights include issues in technical support; establishing policies and procedures; tools for technical support, including hardware and software; impacts of technical support on staff; and future possibilities. (LRW)

The importance of defining technical issues in interagency environmental negotiations

USGS Publications Warehouse

Lamb, B.L.; Burkardt, N.; Taylor, J.G.

2001-01-01

The role of technical clarity in successful multiparty negotiations was studied. Investigations involved in-depth interviews with the principal participants in six consultations conducted under the U.S. Federal Energy Regulatory Commission’s hydroelectric power project licensing procedures. Technical clarity was especially important in these cases because they concerned science-based questions. The principal issues in the six cases were fish passage, instream flow for fish habitat, and entrainment of fish in hydropower turbines. It was concluded that technical clarity was one of the most critical elements in resolving these conflicts. In the least successful negotiations, parties failed to address the basic values of the dispute before plunging into technical studies. The results of those studies usually highlighted the potential for negative outcomes and increased polarization between the participants. In the most successful negotiations, the various parties shared an understanding of each of their basic values. These shared understandings led to technical studies that cast the negotiation in a positive light and illuminated possible solutions.

Rawls’s Wide Reflective Equilibrium as a Method for Engaged Interdisciplinary Collaboration

PubMed Central

Taebi, Behnam

2017-01-01

The introduction of new technologies in society is sometimes met with public resistance. Supported by public policy calls for “upstream engagement” and “responsible innovation,” recent years have seen a notable rise in attempts to attune research and innovation processes to societal needs, so that stakeholders’ concerns are taken into account in the design phase of technology. Both within the social sciences and in the ethics of technology, we see many interdisciplinary collaborations being initiated that aim to address tensions between various normative expectations about science and engineering and the actual outcomes. However, despite pleas to integrate social science research into the ethics of technology, effective normative models for assessing technologies are still scarce. Rawls’s wide reflective equilibrium (WRE) is often mentioned as a promising approach to integrate insights from the social sciences in the normative analysis of concrete cases, but an in-depth discussion of how this would work in practice is still lacking. In this article, we explore to what extent the WRE method can be used in the context of technology development. Using cases in engineering and technology development, we discuss three issues that are currently neglected in the applied ethics literature on WRE. The first issue concerns the operationalization of abstract background theories to moral principles. The second issue concerns the inclusiveness of the method and the demand for openness. The third issue is how to establish whether or not an equilibrium has been reached. These issues should be taken into account when applying the methods to real-world cases involving technological risks. Applying the WRE method in the context of engaged interdisciplinary collaboration requires sensitivity for issues of power and representativeness to properly deal with the dynamics between the technical and normative researchers involved as well as society at large. PMID:29657348

Rawls's Wide Reflective Equilibrium as a Method for Engaged Interdisciplinary Collaboration: Potentials and Limitations for the Context of Technological Risks.

PubMed

Doorn, Neelke; Taebi, Behnam

2018-05-01

The introduction of new technologies in society is sometimes met with public resistance. Supported by public policy calls for "upstream engagement" and "responsible innovation," recent years have seen a notable rise in attempts to attune research and innovation processes to societal needs, so that stakeholders' concerns are taken into account in the design phase of technology. Both within the social sciences and in the ethics of technology, we see many interdisciplinary collaborations being initiated that aim to address tensions between various normative expectations about science and engineering and the actual outcomes. However, despite pleas to integrate social science research into the ethics of technology, effective normative models for assessing technologies are still scarce. Rawls's wide reflective equilibrium (WRE) is often mentioned as a promising approach to integrate insights from the social sciences in the normative analysis of concrete cases, but an in-depth discussion of how this would work in practice is still lacking. In this article, we explore to what extent the WRE method can be used in the context of technology development. Using cases in engineering and technology development, we discuss three issues that are currently neglected in the applied ethics literature on WRE. The first issue concerns the operationalization of abstract background theories to moral principles. The second issue concerns the inclusiveness of the method and the demand for openness. The third issue is how to establish whether or not an equilibrium has been reached. These issues should be taken into account when applying the methods to real-world cases involving technological risks. Applying the WRE method in the context of engaged interdisciplinary collaboration requires sensitivity for issues of power and representativeness to properly deal with the dynamics between the technical and normative researchers involved as well as society at large.

A finite element: Boundary integral method for electromagnetic scattering. Ph.D. Thesis Technical Report, Feb. - Sep. 1992

NASA Technical Reports Server (NTRS)

Collins, J. D.; Volakis, John L.

1992-01-01

A method that combines the finite element and boundary integral techniques for the numerical solution of electromagnetic scattering problems is presented. The finite element method is well known for requiring a low order storage and for its capability to model inhomogeneous structures. Of particular emphasis in this work is the reduction of the storage requirement by terminating the finite element mesh on a boundary in a fashion which renders the boundary integrals in convolutional form. The fast Fourier transform is then used to evaluate these integrals in a conjugate gradient solver, without a need to generate the actual matrix. This method has a marked advantage over traditional integral equation approaches with respect to the storage requirement of highly inhomogeneous structures. Rectangular, circular, and ogival mesh termination boundaries are examined for two-dimensional scattering. In the case of axially symmetric structures, the boundary integral matrix storage is reduced by exploiting matrix symmetries and solving the resulting system via the conjugate gradient method. In each case several results are presented for various scatterers aimed at validating the method and providing an assessment of its capabilities. Important in methods incorporating boundary integral equations is the issue of internal resonance. A method is implemented for their removal, and is shown to be effective in the two-dimensional and three-dimensional applications.

A new generation of real-time DOS technology for mission-oriented system integration and operation

NASA Technical Reports Server (NTRS)

Jensen, E. Douglas

1988-01-01

Information is given on system integration and operation (SIO) requirements and a new generation of technical approaches for SIO. Real-time, distribution, survivability, and adaptability requirements and technical approaches are covered. An Alpha operating system program management overview is outlined.

Key issues and technical route of cyber physical distribution system

NASA Astrophysics Data System (ADS)

Zheng, P. X.; Chen, B.; Zheng, L. J.; Zhang, G. L.; Fan, Y. L.; Pei, T.

2017-01-01

Relying on the National High Technology Research and Development Program, this paper introduced the key issues in Cyber Physical Distribution System (CPDS), mainly includes: composite modelling method and interaction mechanism, system planning method, security defence technology, distributed control theory. Then on this basis, the corresponding technical route is proposed, and a more detailed research framework along with main schemes to be adopted is also presented.

Performance of two different digital evaluation systems used for assessing pre-clinical dental students' prosthodontic technical skills.

PubMed

Gratton, D G; Kwon, S R; Blanchette, D R; Aquilino, S A

2017-11-01

Proper integration of newly emerging digital assessment tools is a central issue in dental education in an effort to provide more accurate and objective feedback to students. The study examined how the outcomes of students' tooth preparation were correlated when evaluated using traditional faculty assessment and two types of digital assessment approaches. Specifically, incorporation of the Romexis Compare 2.0 (Compare) and Sirona prepCheck 1.1 (prepCheck) systems was evaluated. Additionally, satisfaction of students based on the type of software was evaluated through a survey. Students in a second-year pre-clinical prosthodontics course were allocated to either Compare (n = 42) or prepCheck (n = 37) systems. All students received conventional instruction and used their assigned digital system as an additional evaluation tool to aid in assessing their work. Examinations assessed crown preparations of the maxillary right central incisor (#8) and the mandibular left first molar (#19). All submissions were graded by faculty, Compare and prepCheck. Technical scores did not differ between student groups for any of the assessment approaches. Compare and prepCheck had modest, statistically significant correlations with faculty scores with a minimum correlation of 0.3944 (P = 0.0011) and strong, statistically significant correlations with each other with a minimum correlation of 0.8203 (P < 0.0001). A post-course student survey found that 55.26% of the students felt unfavourably about learning the digital evaluation protocols. A total of 62.31% felt favourably about the integration of these digital tools into the curriculum. Comparison of Compare and prepCheck showed no evidence of significant difference in students' prosthodontics technical performance and perception. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

10 CFR 905.40 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Technical assistance. 905.40 Section 905.40 Energy DEPARTMENT OF ENERGY ENERGY PLANNING AND MANAGEMENT PROGRAM Energy Services § 905.40 Technical assistance. Western shall establish a program that provides technical assistance to customers to conduct integrated...

Fitness for duty in the nuclear industry: Update of the technical issues 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

Durbin, N.; Grant, T.

The purpose of this report is to provide an update of information on the technical issues surrounding the creation, implementation, and maintenance of fitness-for-duty (FFD) policies and programs. It has been prepared as a resource for Nuclear Regulatory Commission (NRC) and nuclear power plant personnel who deal with FFD programs. It contains a general overview and update on the technical issues that the NRC considered prior to the publication of its original FFD rule and the revisions to that rule (presented in earlier NUREG/CRs). It also includes chapters that address issues about which there is growing concern and/or about whichmore » there have been substantial changes since NUREG/CR-5784 was published. Although this report is intended to support the NRC`s rule making on fitness for duty, the conclusions of the authors of this report are their own and do not necessarily represent the opinions of the NRC.« less

75 FR 35021 - Reliability Standards Development and NERC and Regional Entity Enforcement; Notice of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... Standards Development and NERC and Regional Entity Enforcement; Notice of Technical Conference June 15, 2010... Technical Conference to address industry perspectives on certain issues pertaining to the development and... Electric Reliability Organization's (ERO) standards development process; communication and interactions...

26 CFR 301.6110-2 - Meaning of terms.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... A “technical advice memorandum” is a written statement issued by the National Office to, and adopted... Internal Revenue Service in a written determination, including, with respect to a technical advice... technical advice memorandum, a “person to whom a written determination pertains” is the taxpayer whose...

Overlapping topics in advisory reports issued by five well-established European National Immunization Technical Advisory Groups from 2011 to 2014.

PubMed

Nijsten, Daniëlle; Houweling, Hans; Durupt, Antoine; Adjagba, Alex

2016-12-07

National Immunization Technical Advisory Groups (NITAGs) are facing increasingly complex vaccination issues together with a lack of human resources for evidence assessment and data analysis. One way to reduce these burdens could be to share some of the preparatory work across NITAGs. We conducted an inventory of all the advisory reports issued by five well-established European NITAGs from 2011 to 2014 to assess overlaps in issues and activities. A total of 104 advisory reports were retrieved. Advisory reports on the same issues were compared to identify overlapping activities and processes. Advisory reports issued by the five NITAGs showed little overlap in issues and processes. A first step towards efficient collaboration would be to establish an independent platform to provide insight into each NITAG's work and to facilitate the exchange of agendas, assessment frameworks and evidence. Copyright © 2016 Elsevier Ltd. All rights reserved.

Hybrid fluorescence and electron cryo-microscopy for simultaneous electron and photon imaging.

PubMed

Iijima, Hirofumi; Fukuda, Yoshiyuki; Arai, Yoshihiro; Terakawa, Susumu; Yamamoto, Naoki; Nagayama, Kuniaki

2014-01-01

Integration of fluorescence light and transmission electron microscopy into the same device would represent an important advance in correlative microscopy, which traditionally involves two separate microscopes for imaging. To achieve such integration, the primary technical challenge that must be solved regards how to arrange two objective lenses used for light and electron microscopy in such a manner that they can properly focus on a single specimen. To address this issue, both lateral displacement of the specimen between two lenses and specimen rotation have been proposed. Such movement of the specimen allows sequential collection of two kinds of microscopic images of a single target, but prevents simultaneous imaging. This shortcoming has been made up by using a simple optical device, a reflection mirror. Here, we present an approach toward the versatile integration of fluorescence and electron microscopy for simultaneous imaging. The potential of simultaneous hybrid microscopy was demonstrated by fluorescence and electron sequential imaging of a fluorescent protein expressed in cells and cathodoluminescence imaging of fluorescent beads. Copyright © 2013 Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balser, S.; Sankar, S.; Miller, R.

In order to more fully integrate renewable resources, such as wind and solar, into the transmission system, additional capacity must be realized in the short term using the installed transmission capacity that exists today. The U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory Transmission and Grid Integration Group supported this study to assemble the history of regulations and status of transmission technology to expand existing grid capacity. This report compiles data on various transmission technology methods and upgrades for increased capacity utilization of the existing transmission system and transmission corridors. The report discusses the technical merit ofmore » each method and explains how the method could be applied within the current regulatory structure to increase existing transmission conductor and/or corridor capacity. The history and current state of alternatives to new construction is presented for regulators, legislators, and other policy makers wrestling with issues surrounding integration of variable generation. Current regulations are assessed for opportunities to change them to promote grid expansion. To support consideration of these alternatives for expanding grid capacity, the report lists relevant rules, standards, and policy changes.« less

Evaluating Instructor Technology Integration in Community and Technical Colleges: A Performance Evaluation Matrix

ERIC Educational Resources Information Center

Del Favero, Marietta; Hinson, Janice M.

2007-01-01

The press for implementing technology based instructional delivery systems in community and technical colleges is well documented. Yet faculty face numerous challenges in integrating technology into instruction (AL-Bataineh & Brooks, 2003; Groves & Zemel, 2000; Khoury, 1997). Stimulating faculty ownership in technology, diffusion of technology use…

Electronics. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; and overview of the electronics field; an list acknowledging the professionals who helped develop the competency list; and the comprehensive listing of the professional or occupational competencies deemed essential for…

Learning SQL Programming with Interactive Tools: From Integration to Personalization

ERIC Educational Resources Information Center

Brusilovsky, Pete; Sosnovsky, Sergey; Yudelson, Michael V.; Lee, Danielle H.; Zadorozhny, Vladimir; Zhou, Xin

2010-01-01

Rich, interactive eLearning tools receive a lot of attention nowadays from both practitioners and researchers. However, broader dissemination of these tools is hindered by the technical difficulties of their integration into existing platforms. This article explores the technical and conceptual problems of using several interactive educational…

78 FR 70040 - Draft Integrated Science Assessment for Nitrogen Oxides-Health Criteria

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-22

... (NO 2 ). The Integrated Science Assessment (ISA), in conjunction with additional technical and policy... the secondary (welfare-based) NAAQS for NO 2 , in conjunction with a review of the secondary NAAQS for... called an Air Quality Criteria Document). The ISA, in conjunction with additional technical and policy...

Drafting. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the drafting industry; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for graduates…

Dental Assistant. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the dental assistant occupation; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for…

Carpentry. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). 2001 Revision.

ERIC Educational Resources Information Center

Ohio State Board of Education, Columbus.

This Ohio Integrated Technical and Academic Competency (ITAC) profile provides the professional or occupational competencies deemed essential for a graduate to perform proficiently in carpentry when he or she graduates from the specialization work force development program in industrial and engineering systems. The profile includes competency…

Nurse Assistant. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the nurse assistant occupation; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for…

Visual Communications Art. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the visual communications art profession; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed…

47 CFR 76.1608 - System technical integration requiring uniform election of must-carry or retransmission consent...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 4 2014-10-01 2014-10-01 false System technical integration requiring uniform election of must-carry or retransmission consent status. 76.1608 Section 76.1608 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE...

47 CFR 76.1608 - System technical integration requiring uniform election of must-carry or retransmission consent...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false System technical integration requiring uniform election of must-carry or retransmission consent status. 76.1608 Section 76.1608 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE...

47 CFR 76.1608 - System technical integration requiring uniform election of must-carry or retransmission consent...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 4 2013-10-01 2013-10-01 false System technical integration requiring uniform election of must-carry or retransmission consent status. 76.1608 Section 76.1608 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE...

47 CFR 76.1608 - System technical integration requiring uniform election of must-carry or retransmission consent...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 4 2012-10-01 2012-10-01 false System technical integration requiring uniform election of must-carry or retransmission consent status. 76.1608 Section 76.1608 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE...

47 CFR 76.1608 - System technical integration requiring uniform election of must-carry or retransmission consent...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false System technical integration requiring uniform election of must-carry or retransmission consent status. 76.1608 Section 76.1608 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE...

Graphic Communications. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the graphic communications field; a list acknowledging professionals who helped develop the competency list; and a comprehensive list of the professional or occupational competencies deemed essential for…

Overview of mechanics of materials branch activities in the computational structures area

NASA Technical Reports Server (NTRS)

Poe, C. C., Jr.

1992-01-01

Base programs and system programs are discussed. The base programs include fundamental research of composites and metals for airframes leading to characterization of advanced materials, models of behavior, and methods for predicting damage tolerance. Results from the base programs support the systems programs, which change as NASA's missions change. The National Aerospace Plane (NASP), Advanced Composites Technology (ACT), Airframe Structural Integrity Program (Aging Aircraft), and High Speed Research (HSR) programs are currently being supported. Airframe durability is one of the key issues in each of these system programs. The base program has four major thrusts, which will be reviewed subsequently. Additionally, several technical highlights will be reviewed for each thrust.

Toward genome-enabled mycology.

PubMed

Hibbett, David S; Stajich, Jason E; Spatafora, Joseph W

2013-01-01

Genome-enabled mycology is a rapidly expanding field that is characterized by the pervasive use of genome-scale data and associated computational tools in all aspects of fungal biology. Genome-enabled mycology is integrative and often requires teams of researchers with diverse skills in organismal mycology, bioinformatics and molecular biology. This issue of Mycologia presents the first complete fungal genomes in the history of the journal, reflecting the ongoing transformation of mycology into a genome-enabled science. Here, we consider the prospects for genome-enabled mycology and the technical and social challenges that will need to be overcome to grow the database of complete fungal genomes and enable all fungal biologists to make use of the new data.

Integrating Occupational Safety and Health Information Into Vocational and Technical Education and Other Workforce Preparation Programs

PubMed Central

Schulte, Paul A.; Stephenson, Carol Merry; Okun, Andrea H.; Palassis, John; Biddle, Elyce

2005-01-01

The high rates of injury among young workers are a pressing public health issue, especially given the demand of the job market for new workers. Young and new workers experience the highest rates of occupational injuries of any age group. Incorporating occupational safety and health (OSH) information into the more than 20 000 vocational and other workforce preparation programs in the United States might provide a mechanism for reducing work-related injuries and illnesses among young and new workers. We assessed the status of including OSH information or training in workforce preparation programs and found there is an inconsistent emphasis on OSH information. PMID:15727967

Mass Casualty Incidents in the Underground Mining Industry: Applying the Haddon Matrix on an Integrative Literature Review.

PubMed

Engström, Karl Gunnar; Angrén, John; Björnstig, Ulf; Saveman, Britt-Inger

2018-02-01

Underground mining is associated with obvious risks that can lead to mass casualty incidents. Information about such incidents was analyzed in an integrated literature review. A literature search (1980-2015) identified 564 modern-era underground mining reports from countries sharing similar occupational health legislation. These reports were condensed to 31 reports after consideration of quality grading and appropriateness to the aim. The Haddon matrix was used for structure, separating human factors from technical and environmental details, and timing. Most of the reports were descriptive regarding injury-creating technical and environmental factors. The influence of rock characteristics was an important pre-event environmental factor. The organic nature of coal adds risks not shared in hard-rock mines. A sequence of mechanisms is commonly described, often initiated by a human factor in interaction with technology and step-wise escalation to involve environmental circumstances. Socioeconomic factors introduce heterogeneity. In the Haddon matrix, emergency medical services are mainly a post-event environmental issue, which were not well described in the available literature. The US Quecreek Coal Mine incident of 2002 stands out as a well-planned rescue mission. Evaluation of the preparedness to handle underground mining incidents deserves further scientific attention. Preparedness must include the medical aspects of rescue operations. (Disaster Med Public Health Preparedness. 2018;12:138-146).

Rough spacecraft surfaces -a threat to Planetary Protection issues

NASA Astrophysics Data System (ADS)

Probst, Alexander; Facius, Rainer; Wirth, Reinhard; Moissl-Eichinger, Christine

Inadvertent introduction of terrestrial microorganisms to foreign solar bodies could compromise the integrity of present and future life detection missions. For Planetary Protection purposes space agencies measure the aerobic, mesophilic spore load of a spacecraft as a proxy indicator in order to determine its bioload. Emerging novel hardware in space science implicates novel surface structures and materials that need to be controlled with regard to contaminations. For instance (roughened) carbon fiber reinforced plastic and Vectran fabric for construction of landing platforms and airbags, respectively, have been used in some Mars exploration missions. These materials have different levels of roughness and their potential risk to retain spores for insufficient sampling success has never been in scope of investigation. In this comprehensive study we evaluated ESA's novel nylon flocked swab protocol on stainless steel and other tech-nical surfaces with regard to Bacillus spore recovery. Low recovery efficiencies of the ESA standard wipe assay for large surface sampling were demonstrated with regard to Bacillus at-rophaeus spore detection. Therefore another protocol designed for rough surface sampling was evaluated on Vectran fabric and (roughened) carbon fiber reinforced plastic. Moreover, scan-ning electron micrographs of the technical surfaces studied allowed a more detailed view on their properties. The evaluated sampling protocols and the corresponding results are of high interest for future life detection missions in order to preserve their scientific integrity throughout spacecraft assembly.

Like a bridge over troubled water--Opening pathways for integrating social sciences and humanities into nuclear research.

PubMed

Turcanu, Catrinel; Schröder, Jantine; Meskens, Gaston; Perko, Tanja; Rossignol, Nicolas; Carlé, Benny; Hardeman, Frank

2016-03-01

Research on nuclear technologies has been largely driven by a detachment of the 'technical content' from the 'social context'. However, social studies of science and technology--also for the nuclear domain--emphasize that 'the social' and 'the technical' dimensions of technology development are inter-related and co-produced. In an effort to create links between nuclear research and innovation and society in mutually beneficial ways, the Belgian Nuclear Research Centre started fifteen years ago a 'Programme of Integration of Social Aspects into nuclear research' (PISA). In line with broader science-policy agendas (responsible research and innovation and technology assessment), this paper argues that the importance of such programmes is threefold. First, their multi-disciplinary basis and participatory character contribute to a better understanding of the interactions between science, technology and society, in general, and the complexity of nuclear technology assessment in particular. Second, their functioning as (self -)critical policy supportive research with outreach to society is an essential prerequisite for policies aiming at generating societal trust in the context of controversial issues related to nuclear technologies and exposure to ionising radiation. Third, such programmes create an enriching dynamic in the organisation itself, stimulating collective learning and transdisciplinarity. The paper illustrates with concrete examples these claims and concludes by discussing some key challenges that researchers face while engaging in work of this kind. Copyright © 2015 Elsevier Ltd. All rights reserved.

32 CFR 202.13 - Technical assistance for public participation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... TRC may request technical assistance for interpreting scientific and engineering issues with regard to the nature of environmental hazards at the installation and environmental restoration activities...

Technical Assistance To Tribal Communities Addressing Brownfields

EPA Pesticide Factsheets

This notice announces the availability of funds and solicits proposals from eligible entities (including eligible nonprofit organizations) to provide technical assistance to tribal communities on brownfield related issues.

Creating a course-based web site in a university environment

NASA Astrophysics Data System (ADS)

Robin, Bernard R.; Mcneil, Sara G.

1997-06-01

The delivery of educational materials is undergoing a remarkable change from the traditional lecture method to dissemination of courses via the World Wide Web. This paradigm shift from a paper-based structure to an electronic one has profound implications for university faculty. Students are enrolling in classes with the expectation of using technology and logging on to the Internet, and professors are realizing that the potential of the Web can have a significant impact on classroom activities. An effective method of integrating electronic technologies into teaching and learning is to publish classroom materials on the World Wide Web. Already, many faculty members are creating their own home pages and Web sites for courses that include syllabi, handouts, and student work. Additionally, educators are finding value in adding hypertext links to a wide variety of related Web resources from online research and electronic journals to government and commercial sites. A number of issues must be considered when developing course-based Web sites. These include meeting the needs of a target audience, designing effective instructional materials, and integrating graphics and other multimedia components. There are also numerous technical issues that must be addressed in developing, uploading and maintaining HTML documents. This article presents a model for a university faculty who want to begin using the Web in their teaching and is based on the experiences of two College of Education professors who are using the Web as an integral part of their graduate courses.

Integrated interdisciplinary training in the radiological sciences.

PubMed

Brenner, D J; Vazquez, M; Buonanno, M; Amundson, S A; Bigelow, A W; Garty, G; Harken, A D; Hei, T K; Marino, S A; Ponnaiya, B; Randers-Pehrson, G; Xu, Y

2014-02-01

The radiation sciences are increasingly interdisciplinary, both from the research and the clinical perspectives. Beyond clinical and research issues, there are very real issues of communication between scientists from different disciplines. It follows that there is an increasing need for interdisciplinary training courses in the radiological sciences. Training courses are common in biomedical academic and clinical environments, but are typically targeted to scientists in specific technical fields. In the era of multidisciplinary biomedical science, there is a need for highly integrated multidisciplinary training courses that are designed for, and are useful to, scientists who are from a mix of very different academic fields and backgrounds. We briefly describe our experiences running such an integrated training course for researchers in the field of biomedical radiation microbeams, and draw some conclusions about how such interdisciplinary training courses can best function. These conclusions should be applicable to many other areas of the radiological sciences. In summary, we found that it is highly beneficial to keep the scientists from the different disciplines together. In practice, this means not segregating the training course into sections specifically for biologists and sections specifically for physicists and engineers, but rather keeping the students together to attend the same lectures and hands-on studies throughout the course. This structure added value to the learning experience not only in terms of the cross fertilization of information and ideas between scientists from the different disciplines, but also in terms of reinforcing some basic concepts for scientists in their own discipline.

Integrating distributed multimedia systems and interactive television networks

NASA Astrophysics Data System (ADS)

Shvartsman, Alex A.

1996-01-01

Recent advances in networks, storage and video delivery systems are about to make commercial deployment of interactive multimedia services over digital television networks a reality. The emerging components individually have the potential to satisfy the technical requirements in the near future. However, no single vendor is offering a complete end-to-end commercially-deployable and scalable interactive multimedia applications systems over digital/analog television systems. Integrating a large set of maturing sub-assemblies and interactive multimedia applications is a major task in deploying such systems. Here we deal with integration issues, requirements and trade-offs in building delivery platforms and applications for interactive television services. Such integration efforts must overcome lack of standards, and deal with unpredictable development cycles and quality problems of leading- edge technology. There are also the conflicting goals of optimizing systems for video delivery while enabling highly interactive distributed applications. It is becoming possible to deliver continuous video streams from specific sources, but it is difficult and expensive to provide the ability to rapidly switch among multiple sources of video and data. Finally, there is the ever- present challenge of integrating and deploying expensive systems whose scalability and extensibility is limited, while ensuring some resiliency in the face of inevitable changes. This proceedings version of the paper is an extended abstract.

Beyond xMOOCs in healthcare education: study of the feasibility in integrating virtual patient systems and MOOC platforms.

PubMed

Stathakarou, Natalia; Zary, Nabil; Kononowicz, Andrzej A

2014-01-01

Background. Massive Open Online Courses (MOOCs) are an emerging trend in online learning. However, their technology is not yet completely adjusted to the needs of healthcare education. Integration of Virtual Patients within MOOCs to increase interactivity and foster clinical reasoning skills training, has been discussed in the past, but not verified by a practical implementation. Objective. To investigate the technical feasibility of integrating MOOCs with Virtual Patients for the purpose of enabling further research into the potential pedagogical benefits of this approach. Methods. We selected OpenEdx and Open Labyrinth as representative constituents of a MOOC platform and Virtual Patient system integration. Based upon our prior experience we selected the most fundamental technical requirement to address. Grounded in the available literature we identified an e-learning standard to guide the integration. We attempted to demonstrate the feasibility of the integration by designing a "proof-of-concept" prototype. The resulting pilot implementation was subject of verification by two test cases. Results. A Single Sign-On mechanism connecting Open Labyrinth with OpenEdx and based on the IMS LTI standard was successfully implemented and verified. Conclusion. We investigated the technical perspective of integrating Virtual Patients with MOOCs. By addressing this crucial technical requirement we set a base for future research on the educational benefits of using virtual patients in MOOCs. This provides new opportunities for integrating specialized software in healthcare education at massive scale.

Beyond xMOOCs in healthcare education: study of the feasibility in integrating virtual patient systems and MOOC platforms

PubMed Central

Zary, Nabil; Kononowicz, Andrzej A.

2014-01-01

Background. Massive Open Online Courses (MOOCs) are an emerging trend in online learning. However, their technology is not yet completely adjusted to the needs of healthcare education. Integration of Virtual Patients within MOOCs to increase interactivity and foster clinical reasoning skills training, has been discussed in the past, but not verified by a practical implementation. Objective. To investigate the technical feasibility of integrating MOOCs with Virtual Patients for the purpose of enabling further research into the potential pedagogical benefits of this approach. Methods. We selected OpenEdx and Open Labyrinth as representative constituents of a MOOC platform and Virtual Patient system integration. Based upon our prior experience we selected the most fundamental technical requirement to address. Grounded in the available literature we identified an e-learning standard to guide the integration. We attempted to demonstrate the feasibility of the integration by designing a “proof-of-concept” prototype. The resulting pilot implementation was subject of verification by two test cases. Results. A Single Sign-On mechanism connecting Open Labyrinth with OpenEdx and based on the IMS LTI standard was successfully implemented and verified. Conclusion. We investigated the technical perspective of integrating Virtual Patients with MOOCs. By addressing this crucial technical requirement we set a base for future research on the educational benefits of using virtual patients in MOOCs. This provides new opportunities for integrating specialized software in healthcare education at massive scale. PMID:25405078

Washtenaw Technical Middle College--High School for the High Tech.

ERIC Educational Resources Information Center

Vandenberg, Victoria

1996-01-01

An alternative high school, called a technical middle college, focuses on preparing students for technical careers; it is articulated with Washtenaw Community College. The curriculum integrates applied academics, especially math and science, with work-based learning, giving students technical knowledge and workplace experience. (Author/JOW)

Engineering the System and Technical Integration

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.

2011-01-01

Approximately 80% of the problems encountered in aerospace systems have been due to a breakdown in technical integration and/or systems engineering. One of the major challenges we face in designing, building, and operating space systems is: how is adequate integration achieved for the systems various functions, parts, and infrastructure? This Contractor Report (CR) deals with part of the problem of how we engineer the total system in order to achieve the best balanced design. We will discuss a key aspect of this question - the principle of Technical Integration and its components, along with management and decision making. The CR will first provide an introduction with a discussion of the Challenges in Space System Design and meeting the challenges. Next is an overview of Engineering the System including Technical Integration. Engineering the System is expanded to include key aspects of the Design Process, Lifecycle Considerations, etc. The basic information and figures used in this CR were presented in a NASA training program for Program and Project Managers Development (PPMD) in classes at Georgia Tech and at Marshall Space Flight Center (MSFC). Many of the principles and illustrations are extracted from the courses we teach for MSFC.

International Conference on Harmonisation; guidance on the M4 Common Technical Document--Quality: Questions and Answers/Location Issues; availability. Notice.

PubMed

2004-06-09

The Food and Drug Administration (FDA) is announcing the availability of a guidance entitled "M4: The CTD--Quality: Questions and Answers/Location Issues." The guidance was prepared under the auspices of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH). This guidance provides further clarification for preparing the quality components of an application file in the common technical document (CTD) format. The guidance addresses the relationship between linked sections for certain parameters (such as polymorphism and particle size), and it addresses location issues (by indicating the section in which to place requested information). The guidance is intended to ease the preparation of paper and electronic submissions, facilitate regulatory reviews, and simplify the exchange of regulatory information among regulatory authorities.

National GAP Conference 2007-Discussion Groups Report

USGS Publications Warehouse

Ratz, Joan M.; Lamb, Berton Lee

2010-01-01

We led two discussion groups during the 2007 National GAP Conference. These discussion groups provided information to help develop a survey of National Gap Analysis Program (GAP) data users. One group discussed technical issues, and the second group discussed the use of GAP data for decisionmaking. Themes emerging from the technical issues group included concerns about data quality, need for information on how to use data, and passive data distribution. The decisionmaking discussion included a wide range of topics including the need to understand presentation of information, the need to connect with and understand users of data, the revision of GAP's mission, and the adaptability of products and data. The decisionmaking group also raised concerns regarding technical issues. One conclusion is that a deep commitment to ongoing information transfer and support is a key component of success for the GAP program.

Efficiency assessment of wastewater treatment plants: A data envelopment analysis approach integrating technical, economic, and environmental issues.

PubMed

Castellet, Lledó; Molinos-Senante, María

2016-02-01

The assessment of the efficiency of wastewater treatment plants (WWTPs) is essential to compare their performance and consequently to identify the best operational practices that can contribute to the reduction of operational costs. Previous studies have evaluated the efficiency of WWTPs using conventional data envelopment analysis (DEA) models. Most of these studies have considered the operational costs of the WWTPs as inputs, while the pollutants removed from wastewater are treated as outputs. However, they have ignored the fact that each pollutant removed by a WWTP involves a different environmental impact. To overcome this limitation, this paper evaluates for the first time the efficiency of a sample of WWTPs by applying the weighted slacks-based measure model. It is a non-radial DEA model which allows assigning weights to the inputs and outputs according their importance. Thus, the assessment carried out integrates environmental issues with the traditional "techno-economic" efficiency assessment of WWTPs. Moreover, the potential economic savings for each cost item have been quantified at a plant level. It is illustrated that the WWTPs analyzed have significant room to save staff and energy costs. Several managerial implications to help WWTPs' operators make informed decisions were drawn from the methodology and empirical application carried out. Copyright © 2015 Elsevier Ltd. All rights reserved.

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

75 FR 39244 - Reliability Standards Development and NERC and Regional Entity Enforcement; Further Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-08

... Standards Development and NERC and Regional Entity Enforcement; Further Notice Concerning Technical... convene a Commissioner-led technical conference regarding issues pertaining to the development of... Corporation and the Regional Entities as previously announced.\\1\\ \\1\\ Notice of Technical Conference, 75 FR 35...

Impact of Automation on Technical Services.

ERIC Educational Resources Information Center

Rooks, Dana C.; Thompson, Linda L.

1988-01-01

Discusses the impact of automation on library technical services, and the need for library managers to be aware of the issues involved and to plan for future developments. The discussion focuses on the areas of job related concerns of technical staff, organizational structures, recruitment and training, and ergonomic considerations. (CLB)

78 FR 72673 - Midcontinent Independent System Operator, Inc.; Supplemental Notice Concerning Post-Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. ER13-2124-000] Midcontinent Independent System Operator, Inc.; Supplemental Notice Concerning Post-Technical Conference Comments As announced in the Notice of Technical Conference issued on October 25, 2013, and as required in the...

A Decision Support Tool to Evaluate Sources and Sinks of Nitrogen within a Watershed Framework

EPA Science Inventory

Human transformation of the nitrogen (N) cycle is causing a number of environmental and human health problems. Federal, state and local authorities focusing on management of N loadings face both technical and non-technical challenges. One technical issue is that we need a bette...

Trends in Career and Technical Education Research

ERIC Educational Resources Information Center

Rojewski, Jay W.; Asunda, Paul; Kim, Soo Jung

2008-01-01

The purpose of this literature review was to identify current trends and issues in research focusing on career and technical education (CTE). The primary sources of literature for this review included all research articles published in three refereed scholarly journals--"Career and Technical Education Research," "Journal of Career and Technical…

Technical and tactical skills related to performance levels in tennis: A systematic review.

PubMed

Kolman, Nikki S; Kramer, Tamara; Elferink-Gemser, Marije T; Huijgen, Barbara C H; Visscher, Chris

2018-06-11

The aim of this systematic review is to provide an overview of outcome measures and instruments identified in the literature for examining technical and tactical skills in tennis related to performance levels. Such instruments can be used to identify talent or the specific skill development training needs of particular players. Searches for this review were conducted using the PubMed, Web of Science, and PsycInfo databases. Out of 733 publications identified through these searches, 40 articles were considered relevant and included in this study. They were divided into three categories: (1) technical skills, (2) tactical skills and (3) integrated technical and tactical skills. There was strong evidence that technical skills (ball velocity and to a lesser extent ball accuracy) and tactical skills (decision making, anticipation, tactical knowledge and visual search strategies) differed among players according to their performance levels. However, integrated measurement of these skills is required, because winning a point largely hinges on a tactical decision to perform a particular stroke (i.e., technical execution). Therefore, future research should focus on examining the relationship between these skills and tennis performance and on the development of integrated methods for measuring these skills.

NREL Partners with Technical University of Denmark on Renewable Energy

Science.gov Websites

System | Energy Systems Integration Facility | NREL Technical University of Denmark NREL Partners with Technical University of Denmark on Renewable Energy System NREL is working in partnership with the Technical University of Denmark for the Centre for IT-Intelligent Energy Systems in Cities

Technical and Vocational Education in Asia and Oceania. Bulletin of the Unesco Regional Office for Education in Asia and Oceania. Number 21, June 1980.

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand). Regional Office for Education in Asia and Oceania.

This issue contains a regional review, discussion of technical and vocational education in countries of Asia and Oceania, articles dealing with various aspects of technical and vocational education, and a bibliographical supplement. The brief statistical review in section 1 concerns second-level technical and vocational education in the developing…

Health IT success and failure: recommendations from literature and an AMIA workshop.

PubMed

Kaplan, Bonnie; Harris-Salamone, Kimberly D

2009-01-01

With the United States joining other countries in national efforts to reap the many benefits that use of health information technology can bring for health care quality and savings, sobering reports recall the complexity and difficulties of implementing even smaller-scale systems. Despite best practice research that identified success factors for health information technology projects, a majority, in some sense, still fail. Similar problems plague a variety of different kinds of applications, and have done so for many years. Ten AMIA working groups sponsored a workshop at the AMIA Fall 2006 Symposium. It was entitled "Avoiding The F-Word: IT Project Morbidity, Mortality, and Immortality" and focused on this under-addressed problem. PARTICIPANTS discussed communication, workflow, and quality; the complexity of information technology undertakings; the need to integrate all aspects of projects, work environments, and regulatory and policy requirements; and the difficulty of getting all the parts and participants in harmony. While recognizing that there still are technical issues related to functionality and interoperability, discussion affirmed the emerging consensus that problems are due to sociological, cultural, and financial issues, and hence are more managerial than technical. Participants drew on lessons from experience and research in identifying important issues, action items, and recommendations to address the following: what "success" and "failure" mean, what contributes to making successful or unsuccessful systems, how to use failure as an enhanced learning opportunity for continued improvement, how system successes or failures should be studied, and what AMIA should do to enhance opportunities for successes. The workshop laid out a research agenda and recommended action items, reflecting the conviction that AMIA members and AMIA as an organization can take a leadership role to make projects more practical and likely to succeed in health care settings.

Ethical aspects of future health care: globalisation of markets and differentiation of societies - ethical challenges.

PubMed

Kluge, Eike-Henner W

2008-01-01

The shift in health care to an aggregate corporate and distributed model dominated by electronic methods of diagnosis, record-keeping and communication spanning jurisdictional boundaries raises technical, social and paradigmatic issues. The technical issues concern the material natures of the tools, devices, procedures and protocols; the social issues gravitate around abstract matters like individual rights and models of responsibility within a corporate setting and accountability in inter-jurisdictional contexts; the paradigmatic issues centre in the question of how the rights and duties of traditional and direct health care translate into the mediated context of the globally expanded corporate model of eHealth and telemedicine. The present discussion presents a brief overview of the issues and sketches some of their implications for the evolution of contemporary health care.

Federal Guidance for Radiation Protection

EPA Pesticide Factsheets

EPA produces federal guidance technical reports, which standardize dose and risk assessment and issues radiation protection guidance to federal agencies. This page provides links to federal guidance policy recommendations and technical reports.

77 FR 12799 - Census Scientific Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-02

...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... and technical expertise, as appropriate, to address Census Bureau program needs and objectives. The...

75 FR 16078 - Census Scientific Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-31

...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... and technical expertise, as appropriate, to address Census Bureau program needs and objectives. The...

76 FR 54197 - Census Scientific Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-31

...-SAC). The Committee will address policy, research, and technical issues relating to a full range of... scientific and technical expertise, as appropriate, to address Census Bureau program needs and objectives...

Design Issues for Producing Effective Multimedia Presentations.

ERIC Educational Resources Information Center

Mason, Lisa D.

1997-01-01

Discusses design issues for interactive multimedia. Notes that technical communication instructors must consider navigational aids, the degree of control a user should have, audio cues, color and typographical elements, visual elements, and copyright issues. (RS)

Adding to the mix: integrating ELSI into a National Nanoscale Science and Technology Center.

PubMed

Bjornstad, David J; Wolfe, Amy K

2011-12-01

This paper describes issues associated with integrating the study of Ethical, Legal and Social Issues (ELSI) into ongoing scientific and technical research and describes an approach adopted by the authors for their own work with the center for nanophase materials sciences (CNMS) at the Oak Ridge national laboratory (ORNL). Four key questions are considered: (a) What is ELSI and how should it identify and address topics of interest for the CNMS? (b) What advantages accrue to incorporating ELSI into the CNMS? (c) How should the integration of ELSI into the CNMS take place? (d) How should one judge the effectiveness of the activity? We conclude that ELSI research is not a monolithic body of knowledge, but should be adapted to the question at hand. Our approach focuses on junctures in the R&D continuum at which key decisions occur, avoids topics of a purely ethical nature or advocacy, and seeks to gather data in ways that permit testing the validity of generalization. Integrating ELSI into the CNMS allows dealing with topics firmly grounded in science, offers concrete examples of potential downstream applications and provides access to the scientists using the CNMS and their insights and observations. As well, integration provides the opportunity for R&D managers to benefit from ELSI insights and the potential to modify R&D agendas. Successful integration is dependent on the particular ELSI question set that drives the project. In this case questions sought to identify key choices, information of value to scientists, institutional attributes, key attributes of the CNMS culture, and alternatives for communicating results. The opportunity to consult with scientists on ELSI implications is offered, but not promoted. Finally, ELSI effectiveness is judged by observing the use to which research products are put within the CNMS, ORNL, and the community of external scholars.

Reflections On The Feasibility and Implications of The Eu Water Framework Directive

NASA Astrophysics Data System (ADS)

Bauwens, W.; Goethals, P. L. M.

The Water Framework Directive (WFD) raises a lot of challenges: the complexity of the text and the diversity of possible solutions to the problems, the timetable for implementation, the incomplete technical and scientific basis, the limitation of human and financial resources,... The paper addresses a number of the key challenges from a technical-scientific, socio-economic and ethical point of view. From a technical-scientific point of view, the major problems are related to the def- inition of the reference conditions and to the simulation tools that will be needed to predict the impact of the River Basin Management Plans. The proper definition of the system of objectives (the reference conditions and the al- lowed deviation from those conditions) throughout the EU has to be considered as one of the key issues of the WFD and remains to be done. Extensive research is actually carried out, both with respect to the conceptual considerations as with respect to the definition of the ecological status. The emphasis that the 5th Research Framework Programme put on the development of integrated simulation models illustrates the need for a further development of such tools. While many models exist for dealing with sub-components of the system (flows, point pollution sources, diffuse pollution, ecosystem models,...) the integration and the adequate model structure and process representation remain major scientific issues. Especially the link between the physico-chemistry and the ecosystem modelling can still be considered to be in its infancy. More research is also needed on the issues of the calibration and the uncertainty of such complex integrated models. It should also be mentioned that the actual - and future - quality monitoring programs in most countries are by far insufficient for the calibration of complex, dynamic quality models. The objective of the WFD is to obtain, in all water bodies in the EU, an ecological quality that is close to the reference or pristine conditions. The rationale behind this definition of the objective is that it allows a harmonisation of the regulation in the EU, hereby accounting for the large diversity of climatologic and geo-physical conditions in the different regions. A fundamental issue that has been neglected when opting for this definition, however, relates to the role of men in the environment. As a conse- 1 quence, regions with an inhabitant density of 500 inhabitants per square km (ISQ) have to reach the same objectives as regions with a density of 50 ISQ. The full cost of the implementation of the WFD is yet unknown, but it will be high to very high, depending on the final definition of the objectives. With respect to the latter, it would be good to keep in mind the economic principle of the lesser return. While the WFD recognises that the water problems should be dealt with in an in- tegrated and holistic way, one may wonder if the integrated approach should not be applied to the environment as a whole. From this point of view, and accounting for the limited resources available, the setting of the objectives with regard to the water environment to an extremely high level may be questioned. The question that hereby arises relates to the definition of the priorities with regard to the allocation of the lim- ited resources for the different environmental problems in and outside the EU. Finally, one should be attentive to the consequences of the WFD on the socio- economic situation and priorities in the EU, in the candidate countries and in the developing world. Especially with regard to developing countries, one can indeed ob- serve that the environmental policy of the EU is used more and more as an economic weapon. Imposing the WFD on these countries would pose severe ethical questions. 2

Launch Vehicle Design Process: Characterization, Technical Integration, and Lessons Learned

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.; Humphries, W. R.

2001-01-01

Engineering design is a challenging activity for any product. Since launch vehicles are highly complex and interconnected and have extreme energy densities, their design represents a challenge of the highest order. The purpose of this document is to delineate and clarify the design process associated with the launch vehicle for space flight transportation. The goal is to define and characterize a baseline for the space transportation design process. This baseline can be used as a basis for improving effectiveness and efficiency of the design process. The baseline characterization is achieved via compartmentalization and technical integration of subsystems, design functions, and discipline functions. First, a global design process overview is provided in order to show responsibility, interactions, and connectivity of overall aspects of the design process. Then design essentials are delineated in order to emphasize necessary features of the design process that are sometimes overlooked. Finally the design process characterization is presented. This is accomplished by considering project technical framework, technical integration, process description (technical integration model, subsystem tree, design/discipline planes, decision gates, and tasks), and the design sequence. Also included in the document are a snapshot relating to process improvements, illustrations of the process, a survey of recommendations from experienced practitioners in aerospace, lessons learned, references, and a bibliography.

NASA Technical Standards Program and Implications for Lessons Learned and Technical Standard Integration

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The National Aeronautics and Space Agency consists of fourteen Facilities throughout the United States. They are organized to support the Agency's principal Enterprises: (1) Space Science, (2) Earth Science, (3) Aerospace Technology, (4) Human Exploration and Development of Space, and (5) Biological and Physical Research. Technical Standards are important to the activities of each Enterprise and have been an integral part in the development and operation of NASA Programs and Projects since the Agency was established in 1959. However, for years each Center was responsible for its own standards development and selection of non-NASA technical standards that met the needs of Programs and Projects for which they were responsible. There were few Agencywide applicable Technical Standards, mainly those in area of safety. Department of Defense Standards and Specifications were the foundation and main source for Technical Standards used by the Agency. This process existed until about 1997 when NASA embarked on a Program to convert NASA's Center-developed Technical Standards into Agencywide endorsed NASA Preferred Technical Standards. In addition, action was taken regarding the formal adoption of non-NASA Technical Standards (DOD, SAE, ASTM, ASME, IEEE, etc.) as NASA Preferred Technical Standards.

Health care information infrastructure: what will it be and how will we get there?

NASA Astrophysics Data System (ADS)

Kun, Luis G.

1996-02-01

During the first Health Care Technology Policy [HCTPI conference last year, during Health Care Reform, four major issues were brought up in regards to the underway efforts to develop a Computer Based Patient Record (CBPR)I the National Information Infrastructure (NIl) as part of the High Performance Computers & Communications (HPCC), and the so-called "Patient Card" . More specifically it was explained how a national information system will greatly affect the way health care delivery is provided to the United States public and reduce its costs. These four issues were: Constructing a National Information Infrastructure (NIl); Building a Computer Based Patient Record System; Bringing the collective resources of our National Laboratories to bear in developing and implementing the NIl and CBPR, as well as a security system with which to safeguard the privacy rights of patients and the physician-patient privilege; Utilizing Government (e.g. DOD, DOE) capabilities (technology and human resources) to maximize resource utilization, create new jobs and accelerate technology transfer to address health care issues. During the second HCTP conference, in mid 1 995, a section of this meeting entitled: "Health Care Technology Assets of the Federal Government" addressed benefits of the technology transfer which should occur for maximizing already developed resources. Also a section entitled:"Transfer and Utilization of Government Technology Assets to the Private Sector", looked at both Health Care and non-Health Care related technologies since many areas such as Information Technologies (i.e. imaging, communications, archival I retrieval, systems integration, information display, multimedia, heterogeneous data bases, etc.) already exist and are part of our National Labs and/or other federal agencies, i.e. ARPA. These technologies although they are not labeled under "Health Care" programs they could provide enormous value to address technical needs. An additional issue deals with both the technical (hardware, software) and human expertise that resides within these labs and their possible role in creating cost effective solutions.

Transfer and utilization of government technology assets to the private sector in the fields of health care and information technologies

NASA Astrophysics Data System (ADS)

Kun, Luis G.

1995-10-01

During the first Health Care Technology Policy conference last year, during health care reform, four major issues were brought up in regards to the efforts underway to develop a computer based patient record (CBPR), the National Information Infrastructure (NII) as part of the high performance computers and communications (HPCC), and the so-called 'patient card.' More specifically it was explained how a national information system will greatly affect the way health care delivery is provided to the United States public and reduce its costs. These four issues were: (1) Constructing a national information infrastructure (NII); (2) Building a computer based patient record system; (3) Bringing the collective resources of our national laboratories to bear in developing and implementing the NII and CBPR, as well as a security system with which to safeguard the privacy rights of patients and the physician-patient privilege; (4) Utilizing government (e.g., DOD, DOE) capabilities (technology and human resources) to maximize resource utilization, create new jobs, and accelerate technology transfer to address health care issues. This year a section of this conference entitled: 'Health Care Technology Assets of the Federal Government' addresses benefits of the technology transfer which should occur for maximizing already developed resources. This section entitled: 'Transfer and Utilization of Government Technology Assets to the Private Sector,' will look at both health care and non-health care related technologies since many areas such as information technologies (i.e. imaging, communications, archival/retrieval, systems integration, information display, multimedia, heterogeneous data bases, etc.) already exist and are part of our national labs and/or other federal agencies, i.e., ARPA. These technologies although they are not labeled under health care programs they could provide enormous value to address technical needs. An additional issue deals with both the technical (hardware, software) and human expertise that resides within these labs and their possible role in creating cost effective solutions.

Towards a Geocognition of Geothermal Energy: an Evolving Research Partnership in South West England

NASA Astrophysics Data System (ADS)

Gibson, H.; Stewart, I. S.; Ledingham, P.

2017-12-01

The development and deployment of novel geological technologies in industry often raise anxiety in the public sphere. New technologies are intrinsically unfamiliar, not only to the public, but also to other technical specialists in the field. This can focus conflict and uncertainty around issues that may not actually be problematic, or obscure other issues that may actually warrant closer inspection. An example of an emergent geo-technology that has received little attention in the public or general technical spheres is the introduction of Enhanced Geothermal Power in the UK. In early 2018, a project testing the viability of deep geothermal heat and power will begin in Cornwall, England, and is likely to face contested issues of public perception that have confronted other novel geological technologies, such as Carbon Capture and Storage and hydraulic fracturing. To address concerns about how the UK public will conceptualise this new technology, the Cornish deep geothermal project has developed an innovative partnership between the industry partner operating the test drilling site and a geoscience cognition research partner. That research partner integrates geoscience, cognitive psychology and media communication specialists in a three-year project that will track evolving public perceptions of and community attitudes to geothermal energy; from initial community engagements to the drilling operations and, ultimately, to the operation of the facility. Key in this study will be an exploration of how the industrial partnership impacts and affects the research process as the site testing proceeds, but also how the research process can engage with issues of communication between the industrial partner and the public. Overall, the interdisciplinary research aims to better understand how public/industry partnerships develop and evolve over the lifetime of an active geo-energy project and thereby help inform and improve community-centred geo-communication around novel energy technologies in the future.

A National Effort to Integrate Math and Science with CTE

ERIC Educational Resources Information Center

Hyslop, Alisha

2008-01-01

National activities focus on priority areas and are often designed to develop, improve and identify the most successful methods and techniques for providing career and technical education (CTE) programs under Perkins. One of these priority areas under the 2006 Perkins Act is the integration of academic and technical education. Since the early…

Administrative Office Technology. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document presents the Ohio Integrated Technical and Academic Competency (ITAC) profile for administrative office technology, which is a comprehensive listing of 58 occupational skill competencies deemed essential for Ohio graduates of programs in office technology. The document begins with an introduction to the ITAC system, a list of…

Marketing Technology. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document presents the Ohio Integrated Technical and Academic Competency profile for marketing technology. The profile is to serve as the basis for curriculum development in Ohio's secondary, adult, and postsecondary programs. The profile includes a comprehensive listing of 580 specialty and foundation key indicators for evaluating mastery of…

The Effects of Curriculum Integration on the Academic Achievement of Secondary Career and Technical Students

ERIC Educational Resources Information Center

Jones, Patricia Anders

2012-01-01

Using a causal-comparative design, this quantitative study investigated whether or not the curriculum integration of academic subjects with career and technical education classes affected secondary students' academic performance as assessed by scores on standardized tests. The purposive sample was drawn from students in Trade and Industry classes…

Integrated Basic Education and Skills Training (I-BEST). Washington's Community and Technical Colleges

ERIC Educational Resources Information Center

Washington State Board for Community and Technical Colleges, 2014

2014-01-01

Washington's Integrated Basic Education and Skills Training Program (I-BEST) quickly teaches students literacy, work, and college-readiness skills so they can move through school and into living wage jobs faster. Pioneered by Washington's community and technical colleges, I-BEST uses a team-teaching approach to combine college-readiness classes…

Practical Nursing. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the field of practical nursing; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for…

Public Safety Core. Integrated Academic and Technical Competencies (ITAC).

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document, which lists the public safety core competencies that are part of the Integrated Academic and Technical Competencies (ITAC) in Ohio, is intended to assist individuals and organizations develop a course to provide students with knowledge and skills applicable to public safety careers, including but not limited to firefighter,…

Information Systems, Security, and Privacy.

ERIC Educational Resources Information Center

Ware, Willis H.

1984-01-01

Computer security and computer privacy issues are discussed. Among the areas addressed are technical and human security threats, security and privacy issues for information in electronic mail systems, the need for a national commission to examine these issues, and security/privacy issues relevant to colleges and universities. (JN)

Socio-technical issues and challenges in implementing safe patient handovers: insights from ethnographic case studies.

PubMed

Balka, Ellen; Tolar, Marianne; Coates, Shannon; Whitehouse, Sandra

2013-12-01

Ineffective handovers in patient care, including those where information loss occurs between care providers, have been identified as a risk to patient safety. Computerization of health information is often offered as a solution to improve the quality of care handovers and decrease adverse events related to patient safety. The purpose of this paper is to broaden our understanding of clinical handover as a patient safety issue, and to identify socio-technical issues which may come to bear on the success of computer based handover tools. Three in depth ethnographic case studies were undertaken. Field notes were transcribed and analyzed with the aid of qualitative data analysis software. Within case analysis was performed on each case, and subsequently, cross case analyses were performed. We identified five types of socio-technical issues which must be addressed if electronic handover tools are to succeed. The inter-dependencies of these issues are addressed in relation to arenas in which health care work takes place. We suggest that the contextual nature of information, ethical and medico-legal issues arising in relation to information handover, and issues related to data standards and system interoperability must be addressed if computerized health information systems are to achieve improvements in patient safety related to handovers in care. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Towards technical interoperability in telemedicine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craft, Richard Layne, II

2004-05-01

For telemedicine to realize the vision of anywhere, anytime access to care, the question of how to create a fully interoperable technical infrastructure must be addressed. After briefly discussing how 'technical interoperability' compares with other types of interoperability being addressed in the telemedicine community today, this paper describes reasons for pursuing technical interoperability, presents a proposed framework for realizing technical interoperability, identifies key issues that will need to be addressed if technical interoperability is to be achieved, and suggests a course of action that the telemedicine community might follow to accomplish this goal.

One System Integrated Project Team: Retrieval And Delivery Of The Hanford Tank Wastes For Vitrification In The Waste Treatment Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harp, Benton J.; Kacich, Richard M.; Skwarek, Raymond J.

The One System Integrated Project Team (IPT) was formed in late 2011 as a way for improving the efficiency of delivery and treatment of highly radioactive waste stored in underground tanks at the U.S. Department of Energy's (DOE's) 586-square-mile Hanford Site in southeastern Washington State. The purpose of the One System IPT is to improve coordination and integration between the Hanford's Waste Treatment Plant (WTP) contractor and the Tank Operations Contractor (TOC). The vision statement is: One System is a WTP and TOC safety conscious team that, through integrated management and implementation of risk-informed decision and mission-based solutions, will enablemore » the earliest start of safe and efficient treatment of Hanford's tank waste, to protect the Columbia River, environment and public. The IPT is a formal collaboration between Bechtel National, Inc. (BNI), which manages design and construction of the WTP for the U.S. Department of Energy's Office of River Protection (DOEORP), and Washington River Protection Solutions (WRPS), which manages the TOC for ORP. More than fifty-six (56) million gallons of highly radioactive liquid waste are stored in one hundred seventy-seven (177) aging, underground tanks. Most of Hanford's waste tanks - one hundred forty-nine (149) of them - are of an old single-shell tank (SST) design built between 1944 and 1964. More than sixty (60) of these tanks have leaked in the past, releasing an estimated one million gallons of waste into the soil and threatening the nearby Columbia River. There are another twenty-eight (28) new double-shelled tanks (DSTs), built from 1968 to 1986, that provide greater protection to the environment. In 1989, DOE, the U.S. Environmental Protection Agency (EPA), and the Washington State Department of Ecology (Ecology) signed a landmark agreement that required Hanford to comply with federal and state environmental standards. It also paved the way for agreements that set deadlines for retrieving the tank wastes and for building and operating the WTP. The tank wastes are the result of Hanford's nearly fifty (50) years of plutonium production. In the intervening years, waste characteristics have been increasingly better understood. However, waste characteristics that are uncertain and will remain as such represent a significant technical challenge in terms of retrieval, transport, and treatment, as well as for design and construction ofWTP. What also is clear is that the longer the waste remains in the tanks, the greater the risk to the environment and the people of the Pacific Northwest. The goal of both projects - tank operations and waste treatment - is to diminish the risks posed by the waste in the tanks at the earliest possible date. About two hundred (200) WTP and TOC employees comprise the IPT. Individual work groups within One System include Technical, Project Integration & Controls, Front-End Design & Project Definition, Commissioning, Nuclear Safety & Engineering Systems Integration, and Environmental Safety and Health and Quality Assurance (ESH&QA). Additional functions and team members will be added as the WTP approaches the operational phase. The team has undertaken several initiatives since its formation to collaborate on issues: (1) alternate scenarios for delivery of wastes from the tank farms to WTP; (2) improvements in managing Interface Control Documents; (3) coordination on various technical issues, including the Defense Nuclear Facilities Nuclear Safety Board's Recommendation 2010-2; (4) deployment of the SmartPlant Foundation-configuration Management System; and (5) preparation of the joint contract deliverable of the Operational Readiness Support Plan.« less

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study

PubMed Central

2012-01-01

Background The introduction of a new method of transmitting prescriptions from general practices to community pharmacies in England (Electronic Prescription Service Release 2 (EPS2)) has generated debate on how it will change work practice. As EPS2 will be a key technical element in dispensing, we reviewed the literature to find that there were no studies on how social and technical elements come together to form work practice in community pharmacies. This means the debate has little point of reference. Our aim therefore was to study the ways social and technical elements of a community pharmacy are used to achieve dispensing through the development of a conceptual model on pharmacy work practice, and to consider how a core technical element such the EPS2 could change work practice. Method We used ethnographic methods inclusive of case-study observations and interviews to collect qualitative data from 15 community pharmacies that were in the process of adopting or were soon to adopt EPS2. We analysed the case studies thematically and used rigorous multi-dimensional and multi-disciplinary interpretive validation techniques to cross analyse findings. Results In practice, dispensing procedures were not designed to take into account variations in human and technical integration, and assumed that repetitive and collective use of socio-technical elements were at a constant. Variables such as availability of social and technical resources, and technical know-how of staff were not taken into account in formalised procedures. Yet community pharmacies were found to adapt their dispensing in relation to the balance of social and technical elements available, and how much of the social and technical elements they were willing to integrate into dispensing. While some integrated as few technical elements as possible, some depended entirely on technical artefacts. This pattern also applied to the social elements of dispensing. Through the conceptual model development process, we identified three approaches community pharmacies used to appropriate procedures in practice. These were ‘technically oriented’, ‘improvising’ or ‘socially oriented’. Conclusion We offer a model of different work approaches community pharmacies use to dispense, which suggests that when adopting a core technical element such as the EPS2 system of dispensing there could be variations in its successful adoption. Technically oriented pharmacies might find it easiest to integrate a similar artefact into work practice although needs EPS2 to synchronise effectively with existing technologies. Pharmacies adopting an improvising-approach have the potential to improve how they organise dispensing through EPS2 although they will need to improve how they apply their operating procedures. Socially oriented pharmacies will need to dramatically adapt their approach to dispensing since they usually rely on few technical tools. PMID:23256484

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study.

PubMed

Harvey, Jasmine; Avery, Anthony J; Waring, Justin; Barber, Nick

2012-12-20

The introduction of a new method of transmitting prescriptions from general practices to community pharmacies in England (Electronic Prescription Service Release 2 (EPS2)) has generated debate on how it will change work practice. As EPS2 will be a key technical element in dispensing, we reviewed the literature to find that there were no studies on how social and technical elements come together to form work practice in community pharmacies. This means the debate has little point of reference. Our aim therefore was to study the ways social and technical elements of a community pharmacy are used to achieve dispensing through the development of a conceptual model on pharmacy work practice, and to consider how a core technical element such the EPS2 could change work practice. We used ethnographic methods inclusive of case-study observations and interviews to collect qualitative data from 15 community pharmacies that were in the process of adopting or were soon to adopt EPS2. We analysed the case studies thematically and used rigorous multi-dimensional and multi-disciplinary interpretive validation techniques to cross analyse findings. In practice, dispensing procedures were not designed to take into account variations in human and technical integration, and assumed that repetitive and collective use of socio-technical elements were at a constant. Variables such as availability of social and technical resources, and technical know-how of staff were not taken into account in formalised procedures. Yet community pharmacies were found to adapt their dispensing in relation to the balance of social and technical elements available, and how much of the social and technical elements they were willing to integrate into dispensing. While some integrated as few technical elements as possible, some depended entirely on technical artefacts. This pattern also applied to the social elements of dispensing. Through the conceptual model development process, we identified three approaches community pharmacies used to appropriate procedures in practice. These were 'technically oriented', 'improvising' or 'socially oriented'. We offer a model of different work approaches community pharmacies use to dispense, which suggests that when adopting a core technical element such as the EPS2 system of dispensing there could be variations in its successful adoption. Technically oriented pharmacies might find it easiest to integrate a similar artefact into work practice although needs EPS2 to synchronise effectively with existing technologies. Pharmacies adopting an improvising-approach have the potential to improve how they organise dispensing through EPS2 although they will need to improve how they apply their operating procedures. Socially oriented pharmacies will need to dramatically adapt their approach to dispensing since they usually rely on few technical tools.

IN-SITU CHEMICAL OXIDATION--ENGINEERING ISSUE

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) Engineering Issue Papers are a series of technology transfer documents that summarize the latest available information on specific technical issues, including fate and transport, specific contaminants, selected treatment and site rem...

Direct, Operational Field Test Evaluation, Institutional Issues

DOT National Transportation Integrated Search

1998-08-01

INSTITUTIONAL ISSUES HAVE BEEN DEFINED AS NON-TECHNICAL ISSUES OR CONCERNS THAT INFLUENCE THE COURSE AND OUTCOME OF AN OPERATIONAL TEST. OFTEN THEY ARE EVENTS AND/OR CIRCUMSTANCES THAT AFFECT ADMINISTRATION, DESIGN, DEPLOYMENT AND EVALUATION OF THE O...

Publishing SNP genotypes of human embryonic stem cell lines: policy statement of the International Stem Cell Forum Ethics Working Party.

PubMed

Knoppers, Bartha M; Isasi, Rosario; Benvenisty, Nissim; Kim, Ock-Joo; Lomax, Geoffrey; Morris, Clive; Murray, Thomas H; Lee, Eng Hin; Perry, Margery; Richardson, Genevra; Sipp, Douglas; Tanner, Klaus; Wahlström, Jan; de Wert, Guido; Zeng, Fanyi

2011-09-01

Novel methods and associated tools permitting individual identification in publicly accessible SNP databases have become a debatable issue. There is growing concern that current technical and ethical safeguards to protect the identities of donors could be insufficient. In the context of human embryonic stem cell research, there are no studies focusing on the probability that an hESC line donor could be identified by analyzing published SNP profiles and associated genotypic and phenotypic information. We present the International Stem Cell Forum (ISCF) Ethics Working Party's Policy Statement on "Publishing SNP Genotypes of Human Embryonic Stem Cell Lines (hESC)". The Statement prospectively addresses issues surrounding the publication of genotypic data and associated annotations of hESC lines in open access databases. It proposes a balanced approach between the goals of open science and data sharing with the respect for fundamental bioethical principles (autonomy, privacy, beneficence, justice and research merit and integrity).

Transcriptomic resources for environmental risk assessment: a case study in the Venice lagoon.

PubMed

Milan, M; Pauletto, M; Boffo, L; Carrer, C; Sorrentino, F; Ferrari, G; Pavan, L; Patarnello, T; Bargelloni, L

2015-02-01

The development of new resources to evaluate the environmental status is becoming increasingly important representing a key challenge for ocean and coastal management. Recently, the employment of transcriptomics in aquatic toxicology has led to increasing initiatives proposing to integrate eco-toxicogenomics in the evaluation of marine ecosystem health. However, several technical issues need to be addressed before introducing genomics as a reliable tool in regulatory ecotoxicology. The Venice lagoon constitutes an excellent case, in which the assessment of environmental risks derived from the nearby industrial activities represents a crucial task. In this context, the potential role of genomics to assist environmental monitoring was investigated through the definition of reliable gene expression markers associated to chemical contamination in Manila clams, and their subsequent employment for the classification of Venice lagoon areas. Overall, the present study addresses key issues to evaluate the future outlooks of genomics in the environmental monitoring and risk assessment. Copyright © 2014 Elsevier Ltd. All rights reserved.

Security Considerations for E-Mental Health Interventions

PubMed Central

Bennett, Anthony James; Griffiths, Kathleen Margaret

2010-01-01

Security considerations are an often overlooked and underfunded aspect of the development, delivery, and evaluation of e-mental health interventions although they are crucial to the overall success of any eHealth project. The credibility and reliability of eHealth scientific research and the service delivery of eHealth interventions rely on a high standard of data security. This paper describes some of the key methodological, technical, and procedural issues that need to be considered to ensure that eHealth research and intervention delivery meet adequate security standards. The paper concludes by summarizing broad strategies for addressing the major security risks associated with eHealth interventions. These include involving information technology (IT) developers in all stages of the intervention process including its development, evaluation, and ongoing delivery; establishing a wide-ranging discourse about relevant security issues; and familiarizing researchers and providers with the security measures that must be instituted in order to protect the integrity of eHealth interventions. PMID:21169173

Fourth Integrated Communications, Navigation, and Surveillance (ICNS) Conference and Workshop 2004: Conclusions and Recommendations

NASA Technical Reports Server (NTRS)

Phillips, Brent; Swanda, Ronald L.; Lewis, Michael S.; Kenagy, Randy; Donahue, George; Homans, Al; Kerczewski, Robert; Pozesky, Marty

2004-01-01

The NASA Glenn Research Center organized and hosted the Fourth Integrated Communications, Navigation, and Surveillance (ICNS) Technologies Conference and Workshop, which took place April 26-30, 2004 at the Hyatt Fair Lakes Hotel in Fairfax, Virginia. This fourth conference of the annual series followed the very successful first ICNS Conference (May 1-3, 2001 in Cleveland, Ohio), second ICNS conference (April 29-May 2, 2002 in Vienna, Virginia), and third ICNS conference (May 19-22, 2003 in Annapolis, Maryland). The purpose of the Fourth ICNS Conference was to assemble government, industry and academic communities performing research and development for advanced digital communications, surveillance and navigation systems and associated applications supporting the national and global air transportation systems to: 1) Understand current efforts and recent results in near- and far-term R&D and technology demonstration; 2) Identify integrated digital communications, navigation and surveillance R&D requirements necessary for a safe, secure and reliable, high-capacity, advanced air transportation system; 3) Provide a forum for fostering collaboration and coordination; and 4) Discuss critical issues and develop recommendations to achieve the future integrated CNS vision for national and global air transportation. The workshop attracted 316 attendees from government, industry and academia to address these purposes through technical presentations, breakout sessions, and individual and group discussions during the workshop and after-hours events, and included 16 international attendees. An Executive Committee consisting of representatives of several key segments of the aviation community concerned with CNS issues met on the day following the workshop to consider the primary outcomes and recommendations of the workshop. This report presents an overview of the conference, workshop breakout session results, and the findings of the Executive Committee.

An Automatic Weather Station Network for Low-Altitude Wind Shear Investigations

DTIC Science & Technology

1984-09-18

information exchange. The United States Government assumes no liability for its contents or use thereof. 4 . ... . . . . . . . . . . . ... ° TECHNICAL REPORT...technical issues asso- ciated with unique FAA needs for weather information used by pilots, air traffic controllers and meteorologists. The weather radar...warnings be free of false alarms and be issued in a timely manner. During the summer of 1983, Lincoln began a long term study that places emphasis on

The Computer Science Technical Report (CS-TR) Project: A Pioneering Digital Library Project Viewed from a Library Perspective.

ERIC Educational Resources Information Center

Anderson, Greg; And Others

1996-01-01

Describes the Computer Science Technical Report Project, one of the earliest investigations into the system engineering of digital libraries which pioneered multiinstitutional collaborative research into technical, social, and legal issues related to the development and implementation of a large, heterogeneous, distributed digital library. (LRW)

ILGWU Worker-Family Education Program. ESL/Technical Curriculum Manual.

ERIC Educational Resources Information Center

Friedman, Judy; Friedman, Deidre

The curriculum for the International Ladies' Garment Workers' Union (ILGWU) English as a Second Language (ESL) and technical classes is a collection of instructional materials and suggestions focusing on workplace-related topics and issues. This guide is intended for use in classes where one technical and one ESL teacher are present and where…

Programs of Study: Year 2 Joint Technical Report. Research Snapshot

ERIC Educational Resources Information Center

National Research Center for Career and Technical Education, 2010

2010-01-01

In January 2010, the National Research Center for Career and Technical Education (NRCCTE) issued a progress report on three studies being conducted by the Center that examine the implementation and outcomes of Programs of Study (POS), which were required in the 2006 reauthorization of the federal legislation for career and technical education…

The Writer's Mind: Ethics in the Teaching of Technical Writing.

ERIC Educational Resources Information Center

Rubens, Philip M.

As opposed to being a "closed" text (tightly constrained by physical formats, corporate style, and specialized vocabulary), technical writing is actually "open" in the sense that such a text can be interpreted subjectively by an informed audience. Three ethical issues that should be explored in teaching technical writing include personality--the…

76 FR 60017 - Technical Conference on Penalty Guidelines; Notice of Technical Conference on Penalty Guidelines

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

... Conference on Penalty Guidelines; Notice of Technical Conference on Penalty Guidelines The staff of the... the Penalty Guidelines, which the Commission issued on September 17, 2010.\\1\\ The conference will be... impact of the Penalty Guidelines on compliance and enforcement matters. More information on the topics to...

76 FR 78641 - Southwestern Gas Storage Technical Conference; Notice of Public Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-19

... Storage Technical Conference; Notice of Public Conference Take notice that on February 16, 2012 at 9 a.m... technical conference with interested parties to discuss issues related to natural gas storage development in... Cold Weather Event of February 1-5, 2011: Causes and Recommendations, ``[a]dditional gas storage...

"Crafts and Technology" and "Technical Education" in Austria

ERIC Educational Resources Information Center

Seiter, Josef

2009-01-01

In Austria, the syllabus for "Technisches Werken/Crafts and Technology" for all types of school in general education was issued more than 30 years ago. The authors believed that it might lay the foundations for technical literacy. The paper is about how the situation of the subject and, with it, technical education has developed since…

DRDC Technical Stream Integrated Capabilities and Vision

DTIC Science & Technology

2011-09-01

Brenda Fraser Allan Keefe Nada Pavlovic Doug Saunders Phil Terhaar Defence R&D Canada Technical Memorandum DRDC Toronto...Beechinor Hamid Boland Brenda Fraser Allan Keefe Nada Pavlovic Doug Saunders Phil Terhaar Defence R&D Canada – Toronto...Technical Memorandum DRDC Toronto TM 2011-017 September 2011 Principal Author Original signed by Allan Keefe Allan Keefe Technical

Bibliography of Lewis Research Center technical publications announced in 1981

NASA Technical Reports Server (NTRS)

1982-01-01

Technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1981 are indexed and abstracted. All the publications were announced in the 1981 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patent applications, and theses. A total of 384 technical publications is listed.

Online Hazardous Waste Cleanup Technical Resources

EPA Pesticide Factsheets

This issue paper is intended to give the reader examples of some online technical resources that can assist with hazardous waste cleanups in the Superfund, Resource Conservation and Recovery Act (RCRA), and Brownfields programs.

75 FR 51239 - Census Scientific Advisory Committee; Notice of Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-19

... Advisory Committee (C-SAC). The Committee will address policy, research, and technical issues relating to a.... The Committee provides scientific and technical expertise, as appropriate, to address Census Bureau...

Educating the humanitarian engineer.

PubMed

Passino, Kevin M

2009-12-01

The creation of new technologies that serve humanity holds the potential to help end global poverty. Unfortunately, relatively little is done in engineering education to support engineers' humanitarian efforts. Here, various strategies are introduced to augment the teaching of engineering ethics with the goal of encouraging engineers to serve as effective volunteers for community service. First, codes of ethics, moral frameworks, and comparative analysis of professional service standards lay the foundation for expectations for voluntary service in the engineering profession. Second, standard coverage of global issues in engineering ethics educates humanitarian engineers about aspects of the community that influence technical design constraints encountered in practice. Sample assignments on volunteerism are provided, including a prototypical design problem that integrates community constraints into a technical design problem in a novel way. Third, it is shown how extracurricular engineering organizations can provide a theory-practice approach to education in volunteerism. Sample completed projects are described for both undergraduates and graduate students. The student organization approach is contrasted with the service-learning approach. Finally, long-term goals for establishing better infrastructure are identified for educating the humanitarian engineer in the university, and supporting life-long activities of humanitarian engineers.

Vaccine procurement and self-sufficiency in developing countries.

PubMed

Woodle, D

2000-06-01

This paper discusses the movement toward self-sufficiency in vaccine supply in developing countries (and countries in transition to new economic and political systems) and explains special supply concerns about vaccine as a product class. It traces some history of donor support and programmes aimed at self-financing, then continues with a discussion about self-sufficiency in terms of institutional capacity building. A number of deficiencies commonly found in vaccine procurement and supply in low- and middle-income countries are characterized, and institutional strengthening with procurement technical assistance is described. The paper also provides information about a vaccine procurement manual being developed by the United States Agency for International Development (USAID) and the World Health Organization (WHO) for use in this environment. Two brief case studies are included to illustrate the spectrum of existing capabilities and different approaches to technical assistance aimed at developing or improving vaccine procurement capability. In conclusion, the paper discusses the special nature of vaccine and issues surrounding potential integration and decentralization of vaccine supply systems as part of health sector reform.

Bibliographies.

ERIC Educational Resources Information Center

Bourdon, Cathleen

1999-01-01

Provides "The Librarian's Bookshelf" a selected annotated bibliography of books (mostly published since 1995) to help librarians deal with the issues of providing appropriate service to children and adults. Lists titles alphabetically in several categories of technical services and issues, instruction, information services, legal issues,…

Technical Topic 3.2.2.d Bayesian and Non-Parametric Statistics: Integration of Neural Networks with Bayesian Networks for Data Fusion and Predictive Modeling

DTIC Science & Technology

2016-05-31

and included explosives such as TATP, HMTD, RDX, RDX, ammonium nitrate , potassium perchlorate, potassium nitrate , sugar, and TNT. The approach...Distribution Unlimited UU UU UU UU 31-05-2016 15-Apr-2014 14-Jan-2015 Final Report: Technical Topic 3.2.2. d Bayesian and Non- parametric Statistics...of Papers published in non peer-reviewed journals: Final Report: Technical Topic 3.2.2. d Bayesian and Non-parametric Statistics: Integration of Neural

TWRS Configuration management program plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vann, J.M.

The TWRS Configuration Management Program Plan (CMPP) integrates technical and administrative controls to establish and maintain consistency among requirements, product configuration, and product information for TWRS products during all life cycle phases. This CMPP will be used by TWRS management and configuration management personnel to establish and manage the technical and integrated baselines and controls and status changes to those baselines.

Multimedia as a Means to Enhance Teaching Technical Vocabulary to Physics Undergraduates in Rwanda

ERIC Educational Resources Information Center

Rusanganwa, Joseph

2013-01-01

This study investigates whether the integration of ICT in education can facilitate teaching and learning. An example of such integration is computer assisted language learning (CALL) of English technical vocabulary by undergraduate physics students in Rwanda. The study draws on theories of cognitive load and multimedia learning to explore learning…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayberry, J.; Stelle, S.; O`Brien, M.

The Mixed Waste Integrated Program Logic Diagram was developed to provide technical alternative for mixed wastes projects for the Office of Technology Development`s Mixed Waste Integrated Program (MWIP). Technical solutions in the areas of characterization, treatment, and disposal were matched to a select number of US Department of Energy (DOE) treatability groups represented by waste streams found in the Mixed Waste Inventory Report (MWIR).

The Impact of Engineering Integrated Science (EIS) Curricula on First-Year Technical High School Students' Attitudes toward Science and Perceptions of Engineering

ERIC Educational Resources Information Center

Nam, Younkyeong; Lee, Sun-Ju; Paik, Seoung-Hey

2016-01-01

This study investigated how engineering integrated science (EIS) curricula affect first-year technical high school students' attitudes toward science and perceptions of engineering. The effect of the EIS participation period on students' attitudes toward science was also investigated via experimental study design. Two engineering integrated…

Intermittent Renewable Management Pilot Phase 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kiliccote, Sila; Homan, Gregory; Anderson, Robert

The Intermittent Renewable Management Pilot - Phase 2 (IRM2) was designed to study the feasibility of demand-side resources to participate into the California Independent System Operator (CAISO) wholesale market as proxy demand resources (PDR). The pilot study focused on understanding the issues related with direct participation of third-parties and customers including customer acceptance; market transformation challenges (wholesale market, technology); technical and operational feasibility; and value to the rate payers, DR resource owners and the utility on providing an enabling mechanism for DR resources into the wholesale markets. The customer had the option of committing to either three contiguous hour blocksmore » for 24 days or six contiguous hours for 12 days a month with day-ahead notification that aligned with the CAISO integrated forward market. As a result of their being available, the customer was paid $10/ kilowatt (kW)-month for capacity in addition to CAISO energy settlements. The participants were limited to no more than a 2 megawatt (MW) capacity with a six-month commitment. Four participants successfully engaged in the pilot. In this report, we provide the description of the pilot, participant performance results, costs and value to participants as well as outline some of the issues encountered through the pilot. Results show that participants chose to participate with storage and the value of CAISO settlements were significantly lower than the capacity payments provided by the utility as incentive payments. In addition, this pilot revealed issues both on the participant side and system operations side. These issues are summarized in the report.The Intermittent Renewable Management Pilot - Phase 2 (IRM2) was designed to study the feasibility of demand-side resources to participate into the California Independent System Operator (CAISO) wholesale market as proxy demand resources (PDR). The pilot study focused on understanding the issues related with direct participation of third-parties and customers including customer acceptance; market transformation challenges (wholesale market, technology); technical and operational feasibility; and value to the rate payers, DR resource owners and the utility on providing an enabling mechanism for DR resources into the wholesale markets.« less

The Impact of Biosampling Procedures on Molecular Data Interpretation*

PubMed Central

Sköld, Karl; Alm, Henrik; Scholz, Birger

2013-01-01

The separation between biological and technical variation without extensive use of technical replicates is often challenging, particularly in the context of different forms of protein and peptide modifications. Biosampling procedures in the research laboratory are easier to conduct within a shorter time frame and under controlled conditions as compared with clinical sampling, with the latter often having issues of reproducibility. But is the research laboratory biosampling really less variable? Biosampling introduces within minutes rapid tissue-specific changes in the cellular microenvironment, thus inducing a range of different pathways associated with cell survival. Biosampling involves hypoxia and, depending on the circumstances, hypothermia, circumstances for which there are evolutionarily conserved defense strategies in the range of species and also are relevant for the range of biomedical conditions. It remains unclear to what extent such adaptive processes are reflected in different biosampling procedures or how important they are for the definition of sample quality. Lately, an increasing number of comparative studies on different biosampling approaches, post-mortem effects and pre-sampling biological state, have investigated such immediate early biosampling effects. Commonalities between biosampling effects and a range of ischemia/reperfusion- and hypometabolism/anoxia-associated biological phenomena indicate that even small variations in post-sampling time intervals are likely to introduce a set of nonrandom and tissue-specific effects of experimental importance (both in vivo and in vitro). This review integrates the information provided by these comparative studies and discusses how an adaptive biological perspective in biosampling procedures may be relevant for sample quality issues. PMID:23382104

Integration of Telemedicine in Graduate Medical Informatics Education

PubMed Central

Demiris, George

2003-01-01

An essential part of health informatics is telemedicine, the use of advanced telecommunications technologies to bridge distance and support health care delivery and education. This report discusses the integration of telemedicine into a medical informatics curriculum and, specifically, a framework for a telemedicine course. Within this framework, the objectives and exit competencies are presented and course sections are described: definitions, introduction to technical aspects of telemedicine, evolution of telemedicine and its impact on health care delivery, success and failure factors, and legal and ethical issues. The emphasis is on literature review tools, practical exposure to products and applications, and problem-based learning. Given the rapid advances in the telecommunication field, keeping the course material up to date becomes a challenge for the instructor who at the same time aims to equip students with the knowledge and tools they will need in their future role as decision makers to detect a need for, design, implement, maintain, or evaluate a telemedicine application. PMID:12668696

Towards Knowledge Management for Smart Manufacturing.

PubMed

Feng, Shaw C; Bernstein, William Z; Hedberg, Thomas; Feeney, Allison Barnard

2017-09-01

The need for capturing knowledge in the digital form in design, process planning, production, and inspection has increasingly become an issue in manufacturing industries as the variety and complexity of product lifecycle applications increase. Both knowledge and data need to be well managed for quality assurance, lifecycle-impact assessment, and design improvement. Some technical barriers exist today that inhibit industry from fully utilizing design, planning, processing, and inspection knowledge. The primary barrier is a lack of a well-accepted mechanism that enables users to integrate data and knowledge. This paper prescribes knowledge management to address a lack of mechanisms for integrating, sharing, and updating domain-specific knowledge in smart manufacturing. Aspects of the knowledge constructs include conceptual design, detailed design, process planning, material property, production, and inspection. The main contribution of this paper is to provide a methodology on what knowledge manufacturing organizations access, update, and archive in the context of smart manufacturing. The case study in this paper provides some example knowledge objects to enable smart manufacturing.

National Aero-Space Plane team selects design

NASA Astrophysics Data System (ADS)

Kandebo, Stanley W.

1990-10-01

The selection of a design configuration for the NASP currently favors a directionally stable lifting body that incorporates dual stabilizers, short wings, and a two-man, dorsal crew compartment. The X-30 is expected to be 150-200 ft long and to have a takeoff gross weight of 250,000-300,000 lb. Three to five scramjet engines and a single 50,000 to 70,000 lb thrust rocket integrated into the airframe are expected to power the vehicle. The rocket will provide the X-30 with the burst of energy it will require to obtain orbital velocity and also to maneuver the craft out of earth orbit. Continuing propulsion and technical advances that include materials, aerodynamics, and simulations areas are being developed by program researchers. One of the most important achievements has been the progress made in locating the boundary-layer transition point on the NASP; engine, airframe integration, and flight-test issues are being addressed in separate study programs.

Innovations in science and scenarios for assessment.

PubMed

Kunkel, Kenneth E; Moss, Richard; Parris, Adam

Scenarios for the Third National Climate Assessment (NCA3) were produced for physical climate and sea level rise with substantial input from disciplinary and regional experts. These scenarios underwent extensive review and were published as NOAA Technical Reports. For land use/cover and socioeconomic conditions, scenarios already developed by other agencies were specified for use in the NCA3. Efforts to enhance participatory scenario planning as an assessment activity were pursued, but with limited success. Issues and challenges included the timing of availability of scenarios, the need for guidance in use of scenarios, the need for approaches to nest information within multiple scales and sectors, engagement and collaboration of end users in scenario development, and development of integrated scenarios. Future assessments would benefit from an earlier start to scenarios development, the provision of training in addition to guidance documents, new and flexible approaches for nesting information, ongoing engagement and advice from both scientific and end user communities, and the development of consistent and integrated scenarios.

Innovations in science and scenarios for assessment

DOE PAGES

Kunkel, Kenneth E.; Moss, Richard; Parris, Adam

2015-08-29

Scenarios for the Third National Climate Assessment (NCA3) were produced for physical climate and sea level rise with substantial input from disciplinary and regional experts. These scenarios underwent extensive review and were published as NOAA Technical Reports. For land use/cover and socioeconomic conditions, scenarios already developed by other agencies were specified for use in the NCA3. Efforts to enhance participatory scenario planning as an assessment activity were pursued, but with limited success. Issues and challenges included the timing of availability of scenarios, the need for guidance in use of scenarios, the need for approaches to nest information within multiple scalesmore » and sectors, engagement and collaboration of end users in scenario development, and development of integrated scenarios. Future assessments would benefit from an earlier start to scenarios development, the provision of training in addition to guidance documents, new and flexible approaches for nesting information, ongoing engagement and advice from both scientific and end user communities, and the development of consistent and integrated scenarios.« less

1992 NASA Life Support Systems Analysis workshop

NASA Technical Reports Server (NTRS)

Evanich, Peggy L.; Crabb, Thomas M.; Gartrell, Charles F.

1992-01-01

The 1992 Life Support Systems Analysis Workshop was sponsored by NASA's Office of Aeronautics and Space Technology (OAST) to integrate the inputs from, disseminate information to, and foster communication among NASA, industry, and academic specialists. The workshop continued discussion and definition of key issues identified in the 1991 workshop, including: (1) modeling and experimental validation; (2) definition of systems analysis evaluation criteria; (3) integration of modeling at multiple levels; and (4) assessment of process control modeling approaches. Through both the 1991 and 1992 workshops, NASA has continued to seek input from industry and university chemical process modeling and analysis experts, and to introduce and apply new systems analysis approaches to life support systems. The workshop included technical presentations, discussions, and interactive planning, with sufficient time allocated for discussion of both technology status and technology development recommendations. Key personnel currently involved with life support technology developments from NASA, industry, and academia provided input to the status and priorities of current and future systems analysis methods and requirements.

Position and Speed Control of Brushless DC Motors Using Sensorless Techniques and Application Trends

PubMed Central

Gamazo-Real, José Carlos; Vázquez-Sánchez, Ernesto; Gómez-Gil, Jaime

2010-01-01

This paper provides a technical review of position and speed sensorless methods for controlling Brushless Direct Current (BLDC) motor drives, including the background analysis using sensors, limitations and advances. The performance and reliability of BLDC motor drivers have been improved because the conventional control and sensing techniques have been improved through sensorless technology. Then, in this paper sensorless advances are reviewed and recent developments in this area are introduced with their inherent advantages and drawbacks, including the analysis of practical implementation issues and applications. The study includes a deep overview of state-of-the-art back-EMF sensing methods, which includes Terminal Voltage Sensing, Third Harmonic Voltage Integration, Terminal Current Sensing, Back-EMF Integration and PWM strategies. Also, the most relevant techniques based on estimation and models are briefly analysed, such as Sliding-mode Observer, Extended Kalman Filter, Model Reference Adaptive System, Adaptive observers (Full-order and Pseudoreduced-order) and Artificial Neural Networks. PMID:22163582

Shuttle payload interface verification equipment study. Volume 2: Technical document, part 1

NASA Technical Reports Server (NTRS)

1976-01-01

The technical analysis is reported that was performed during the shuttle payload interface verification equipment study. It describes: (1) the background and intent of the study; (2) study approach and philosophy covering all facets of shuttle payload/cargo integration; (3)shuttle payload integration requirements; (4) preliminary design of the horizontal IVE; (5) vertical IVE concept; and (6) IVE program development plans, schedule and cost. Also included is a payload integration analysis task to identify potential uses in addition to payload interface verification.

76 FR 19766 - California Independent System Operator Corporation; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-08

...) Capacity Procurement Mechanism (CPM) and exceptional dispatch mitigation provisions.\\1\\ Take notice that... (2011). The purpose of the technical conference is to discuss the issues raised by CAISO's proposed CPM...

Finance Program, Technical Assistance Brief 1

DOT National Transportation Integrated Search

1993-01-01

This four page pamphlet highlights the work of the Federal Transit : Administration's Office of Technical Assistance and Safety. Articles in this : issue are: Transit's Finance Challenge, which discusses the three main aspects : of the Office's Finan...

Approach to implementing a DICOM network: incorporate both economics and workflow adaptation

NASA Astrophysics Data System (ADS)

Beaver, S. Merritt; Sippel-Schmidt, Teresa M.

1995-05-01

This paper describes an approach to aide in the decision-making process for the justification and design of a digital image and information management system. It identifies key technical and clinical issues that need to be addressed by a healthcare institution during this process. Some issues identified here are very controversial and may take months or years for a department to determine solutions which meet their specific staffing, financial, and technical needs.

New Frameworks for Detecting and Minimizing Information Leakage in Anonymized Network Data

DTIC Science & Technology

2011-10-01

researcher the exact extent to which a particular utility is affected by the anonymization. For instance, Karr et al.’s use of the Kullback - Leibler ...technical, legal, policy, and privacy issues limit the ability of operators to produce data sets for information security testing . In an effort to...technical, legal, policy, and privacy issues limit the ability of operators to produce datasets for information security testing . In an effort to help

PUBLIC POLICY ISSUES, REPLY LEGAL BRIEF, AND TECHNICAL AND ECONOMIC DATA, BEFORE THE FEDERAL COMMUNICATIONS COMMISSION, IN THE MATTER OF THE ESTABLISHMENT OF DOMESTIC COMMUNICATIONS SATELLITE FACILITIES BY NON-GOVERNMENTAL ENTITIES, DOCKET 16495.

ERIC Educational Resources Information Center

Ford Foundation, New York, NY.

THE THREE PARTS OF THIS FORD FUNDATION SUBMISSION PROVIDE INFORMATION ON BROAD ISSUES OF ORGANIZATION AND PUBLIC POLICY AS THEY RELATE TO SATELLITE MODEL SYSTEMS BNS-3 AND BNS-4, ON LEGAL PROBLEMS OF AUTHORIZATION AND CONTROL, AND ON THE TECHNICAL CHARACTERISTICS, COSTS, AND BROADCAST SPECTRUM LIMITATIONS OF EACH SYSTEM. VOLUME I OUTLINES…

Market and policy barriers to deployment of energy storage

DOE PAGES

Sioshansi, Ramteen; Denholm, Paul; Jenkin, Thomas

2012-04-01

There has recently been resurgent interest in energy storage, due to a number of developments in the electricity industry. Despite this interest, very little storage, beyond some small demonstration projects, has been deployed recently. While technical issues, such as cost, device efficiency, and other technical characteristics are often listed as barriers to storage, there are a number of non-technical and policy-related issues. This paper surveys some of these main barriers and proposes some potential research and policy steps that can help address them. Furthermore, while the discussion is focused on the United States, a number of the findings and observationsmore » may be more broadly applicable.« less

The Technical Communicator as Advocate: Integrating a Social Justice Approach in Technical Communication

ERIC Educational Resources Information Center

Jones, Natasha N.

2016-01-01

This article argues for the need for a social justice approach to technical communication research and pedagogy. Given previous calls by scholars in technical and professional communication (TPC) for an attention to diversity, inclusion, and equality, the author examines the place and purpose of social justice in TPC and provides useful approaches…

76 FR 7810 - Notice of Proposed Change to Section I of the South Dakota and North Dakota State Technical Guides

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-11

... must be made to the NRCS State Technical Guides concerning State wetland mapping conventions. The two States are proposing to issue joint State wetland mapping conventions. The joint State wetland mapping conventions will be used as part of the technical documents to conduct wetland determinations on agriculture...

Use of Career Education and Occupation Information Services in Boosting Enrolment into Vocational and Technical Education Programs in Nigeria

ERIC Educational Resources Information Center

Igbinedion, V. I.; Ojeaga, I. J.

2012-01-01

The major thrust of technical and vocational education (TVE) worldwide is to address issues of youth unemployment, poverty and international competitiveness in skills development towards current and projected opportunities and challenges. The paper posits that despite the evidence of numerous reforms in vocational and technical education programs…

76 FR 11417 - Public Workshop and Hearing for Rear Visibility; Federal Motor Vehicle Safety Standard, Rearview...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

...), Department of Transportation (DOT). ACTION: Notice of proposed rulemaking: Announcement of a public technical... this proposal. The first event, a public technical workshop, will be held on March 11, 2011, to discuss technical issues relevant to the test procedure described in the proposed rule. The second event, a public...

Government Information Quarterly. Volume 7, no. 2: National Aeronautics and Space Administration Scientific and Technical Information Programs. Special issue

NASA Technical Reports Server (NTRS)

Hernon, Peter (Editor); Mcclure, Charles R. (Editor); Pinelli, Thomas E. (Editor)

1990-01-01

NASA scientific and technical information (STI) programs are discussed. Topics include management of information in a research and development agency, the new space and Earth science information systems at NASA's archive, scientific and technical information management, and technology transfer of NASA aerospace technology to other industries.

77 FR 74658 - Texas Eastern Transmission, LP; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-17

...-captioned proceeding \\1\\ directed that a technical conference be held to address issues raised by Texas... adjustments. \\1\\ Texas Eastern Transmission, LP, 141 FERC ]61,172 (2012). Take notice that a technical conference will be held on Tuesday, January 15, 2013 at 9:30 a.m., in a room to be designated at the offices...

TRICHLOROETHYLENE (TCE) ISSUE PAPERS

EPA Science Inventory

These issue papers are a part of EPA's effort to develop a trichloroethylene (TCE) human health risk assessment. These issue papers were developed by EPA to provide scientific and technical information to the National Academy of Sciences (NAS) for use in developing their advice ...

Building Your Campus Portal: Advice from the Field.

ERIC Educational Resources Information Center

Krebs, Arlene

2001-01-01

Discusses portal technology in higher education, including planning, design, technical, and financial issues. Highlights include determining the customers; marketing possibilities for the university; ownership issues; data design; effective cost structuring; security issues; adaptability; content; and customer input and feedback. (LRW)

A critical review and analysis of ethical issues associated with the artificial pancreas.

PubMed

Quintal, A; Messier, V; Rabasa-Lhoret, R; Racine, E

2018-04-25

The artificial pancreas combines a hormone infusion pump with a continuous glucose monitoring device, supported by a dosing algorithm currently installed on the pump. It allows for dynamic infusions of insulin (and possibly other hormones such as glucagon) tailored to patient needs. For patients with type 1 diabetes the artificial pancreas has been shown to prevent more effectively hypoglycaemic events and hyperglycaemia than insulin pump therapy and has the potential to simplify care. However, the potential ethical issues associated with the upcoming integration of the artificial pancreas into clinical practice have not yet been discussed. Our objective was to identify and articulate ethical issues associated with artificial pancreas use for patients, healthcare professionals, industry and policymakers. We performed a literature review to identify clinical, psychosocial and technical issues raised by the artificial pancreas and subsequently analysed them through a common bioethics framework. We identified five sensitive domains of ethical issues. Patient confidentiality and safety can be jeopardized by the artificial pancreas' vulnerability to security breaches or unauthorized data sharing. Public and private coverage of the artificial pancreas could be cost-effective and warranted. Patient selection criteria need to ensure equitable access and sensitivity to patient-reported outcomes. Patient coaching and support by healthcare professionals or industry representatives could help foster realistic expectations in patients. Finally, the artificial pancreas increases the visibility of diabetes and could generate issues related to personal identity and patient agency. The timely consideration of these issues will optimize the technological development and clinical uptake of the artificial pancreas. Copyright © 2018. Published by Elsevier Masson SAS.

Enhancing US competitiveness through Federal scientific and technical information: Issues and opportunities

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.

1990-01-01

The possibility of using Federally funded scientific and technical information (STI) to increase U.S. industrial innovation and productivity is discussed. The history of Federally funded research and development in the fields of agriculture and aviation is reviewed as an example of successful government-sponsored research. Issues related to the production and utilization of information are considered and Federal STI policy is outlined. Issues related to the transfer of knowledge between government agencies and industry are examined and a model depicting the transfer of STI in aerospace research and development is presented. Also, consideration is given to the problem of open communication versus restricted access to STI.

UFO in the Left Atrium: How to Capture Metal Debris Floating in the Left Atrium.

PubMed

Fassini, Gaetano; Moltrasio, Massimo; Conti, Sergio; Biagioli, Viviana; Tondo, Claudio

2016-06-01

Electrophysiology procedures involving left atrium navigation are becoming more frequent, mostly due to the increase of atrial fibrillation ablation. Mapping catheters of different shapes and size as well as dedicated sheaths are mandatory tools for the accomplishment of procedural end point. Therefore, technical issues are expected, usually unrelated to significant risk. However, any accidental intra-atrial device loss of integrity implies a risk of cerebrovascular embolization. The lack of clear evidence on how to manage these events and the need for a quick solution complicate the scenario. We report an empirical solution in the case of debris floating in the left atrium. Copyright © 2016 Canadian Cardiovascular Society. Published by Elsevier Inc. All rights reserved.

In-pile Hydrothermal Corrosion Evaluation of Coated SiC Ceramics and Composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carpenter, David; Ang, Caen; Katoh, Yutai

2017-09-01

Hydrothermal corrosion accelerated by water radiolysis during normal operation is among the most critical technical feasibility issues remaining for silicon carbide (SiC) composite-based cladding that could provide enhanced accident-tolerance fuel technology for light water reactors. An integrated in-pile test was developed and performed to determine the synergistic effects of neutron irradiation, radiolysis, and pressurized water flow, all of which are relevant to a typical pressurized water reactor (PWR). The test specimens were chosen to cover a range of SiC materials and a variety of potential options for environmental barrier coatings. This document provides a summary of the irradiation vehicle design,more » operations of the experiment, and the specimen loading into the irradiation vehicle.« less

Preliminary environmental assessment for the Satellite Power System (SPS). Volume 2: Detailed assessment

NASA Technical Reports Server (NTRS)

1978-01-01

Volume 2 provides a preliminary assessment of the impact of the Satellite Power System (SPS) on the environment in a technically detailed format more suitable for peer review than the executive summary of Vol. 1. It serves to integrate and assimilate information that has appeared in documents referenced herein and to focus on issues that are purely environmental. It discloses the state-of-knowledge as perceived from recently completed DOE-sponsored studies and defines prospective research and study programs that can advance the state-of-knowledge and provide an expanded data base for use in an assessment planned for 1980. Alternatives for research that may be implemented in order to achieve this advancement are also discussed.

Integrated Field Testing of Fuel Cells and Micro-Turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jerome R. Temchin; Stephen J. Steffel

A technical and economic evaluation of the prospects for the deployment of distributed generation on Long Beach Island, New Jersey concluded that properly sited DG would defer upgrading of the electric power grid for 10 years. This included the deployment of fuel cells or microturbines as well as reciprocating engines. The implementation phase of this project focused on the installation of a 120 kW CHP microturbine system at the Harvey Cedars Bible Conference in Harvey Cedars, NJ. A 1.1 MW generator powered by a gas-fired reciprocating engine for additional grid support was also installed at a local substation. This reportmore » contains installation and operation issues as well as the utility perspective on DG deployment.« less

Do You Ignore Information Security in Your Journal Website?

PubMed

Dadkhah, Mehdi; Borchardt, Glenn; Lagzian, Mohammad

2017-08-01

Nowadays, web-based applications extend to all businesses due to their advantages and easy usability. The most important issue in web-based applications is security. Due to their advantages, most academic journals are now using these applications, with papers being submitted and published through their websites. As these websites are resources for knowledge, information security is primary for maintaining their integrity. In this opinion piece, we point out vulnerabilities in certain websites and introduce the potential for future threats. We intend to present how some journals are vulnerable and what will happen if a journal can be infected by attackers. This opinion is not a technical manual in information security, it is a short inspection that we did to improve the security of academic journals.

ECASTAR: Energy conservation. An assessment of systems, technologies and requirements

NASA Technical Reports Server (NTRS)

1975-01-01

A methodology was presented for a systems approach to energy conservation actions and their potentials and impacts in the United States. Constraints affecting the approach were ranked, and the most important ones are the present economic and technical conditions. The following unresolved issues were identified: consumptive lifestyles vs. conservation ethic, environmental standards vs. energy conservation, capital availability, decentralization and vertical integration vs. centralization, fuel rich regions vs. fuel poor regions, supply vs. end use conservation, life cycle costing vs. initial cost, mandatory savings vs. voluntary savings, labor intensive vs. capital intensive, price control vs. free market. The following recommendations were made: provide action/impact assessment, establish regional energy centers, improve technology articulation with government, design total energy systems, utilize existing systems approach expertise.

Digital video technology and production 101: lights, camera, action.

PubMed

Elliot, Diane L; Goldberg, Linn; Goldberg, Michael J

2014-01-01

Videos are powerful tools for enhancing the reach and effectiveness of health promotion programs. They can be used for program promotion and recruitment, for training program implementation staff/volunteers, and as elements of an intervention. Although certain brief videos may be produced without technical assistance, others often require collaboration and contracting with professional videographers. To get practitioners started and to facilitate interactions with professional videographers, this Tool includes a guide to the jargon of video production and suggestions for how to integrate videos into health education and promotion work. For each type of video, production principles and issues to consider when working with a professional videographer are provided. The Tool also includes links to examples in each category of video applications to health promotion.

Models of therapeutic engagement. Part II: sincerity and authenticity.

PubMed

Billow, Richard M

2010-01-01

Our topic concerns four relational modes of speaking and listening, and their relationship to truth and falsity. In a separate article, Part I introduced the topic and discussed the modes of diplomacy and integrity. The focus of Part II is on sincerity and authenticity, and on the interrelationship among all four modes and their differing functions in the totality of the clinical situation. Together the papers disentangle and address some of the technical issues that concern the relational group psychotherapist regarding topics of intersubjectivity, presentation of self, and self-disclosure. The four overlapping categories while nonexclusive are exhaustive; they supply conceptual references for the therapeutic stance one has adopted, allowing the therapist to be more aware of what he or she is doing and why.