Fiscal year 1981 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Thacker, S. S. (Compiler)

1981-01-01

This bibliography lists approximately 503 formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY-1981. It also includes papers of MSFC contractors. Citations announced in the NASA scientific and technical information system are noted.

Fiscal year 1979 scientific and technical reports, articles, papers and presentations

NASA Technical Reports Server (NTRS)

White, O. L. (Compiler)

1979-01-01

This bibliography lists approximately 590 formal NASA technical reports, papers published in technical journals, presentations by MSFC personnel, and reports of MSFC contractors introduced into the NASA scientific and technical information system in 1979.

Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Turner, J. E. (Compiler)

2000-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY99. It also includes papers of MSFC contractors. All of the NASA series reports may be obtained from the NASA Center for AeroSpace Information (CASI), 7121 Standard Drive, Hanover, MD 21076-1320 The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 1989 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1989-01-01

A compendium of bibliographic references to papers presented by Marshall Space Flight Center (MSFC) personnel and contractors during FY 1989 is provided. The papers include formal NASA technical reports, memoranda, papers which were published in technical journals, and presentations by MSFC personnel. The formal NASA technical reports and memoranda have abstracts included. Sources for obtaining these documents are also included.

FY 1999 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Waits, J.oyce E.Turner

2000-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY99. It also includes papers of MSFC contractors. All of the NASA series reports may be obtained from the NASA Center for AeroSpace Information (CASI), 7121 Standard Drive, Hanover, MD 21076-1320 The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 1985 scientific and technical reports, articles, papers and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1985-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by Marshal Space Flight Center (MSFC) personnel in FY 85. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Va. 22161.

Scientific and technical papers presented or published by JSC authors in 1985

NASA Technical Reports Server (NTRS)

1986-01-01

The Lyndon B. Johnson Space Center contributions to the scientific and technical literature in aerospace and life sciences made during calendar year 1985 are described. Citations include NASA formal series reports, journal articles, conference and symposium presentations, papers published in proceedings or other collective works, and seminar and workshop results.

The 1990 Johnson Space Center bibliography of scientific and technical papers

NASA Technical Reports Server (NTRS)

1991-01-01

Abstracts are presented of scientific and technical papers written and/or presented by L. B. Johnson Space Center (JSC) authors, including civil servants, contractors, and grantees, during the calendar year of 1990. Citations include conference and symposium presentations, papers published in proceedings or other collective works, seminars, and workshop results, NASA formal report series (including contractually required final reports), and articles published in professional journals.

Scientific and technical papers presented or published by JSC authors in 1986

NASA Technical Reports Server (NTRS)

1987-01-01

A compilation of Lyndon B. Johnson Space Center contributions to the scientific and technical literature in aerospace and life sciences made during calender year 1985 is presented. Citations include NASA formal series reports, journal articles, conference and symposium presentations, papers published in proceedings or other collective works, and seminar and workshop results.

Overview of Selection Process for Most Influential Paper of the 1970's

NASA Technical Reports Server (NTRS)

Hayes, Peggy S.; Moser, Kelsey M.

2011-01-01

Slides are for a presentation at the AIAA AFM conference invited session titled, 'AFM Most Influential Papers of the 1970's'. The slides describe the selection process used by the members of the technical committee to select the finalists and winning paper. The slides refer to technical papers published in the past, but have no technical data contained within them.

Final Technical Report for contract number DE-FG02-05ER15670

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glazebrook, Jane

This is the final technical report for contract number DE-FG02-05ER15670. The project is now complete, and results of the project have been published. Two papers were published based on work done in the last three-year funding period. The DOIs of these papers are included below. The abstracts of the papers, providing summaries of the work, are included in the body of the report.

Bibliography of NASA published reports on general aviation, 1975 to 1981

NASA Technical Reports Server (NTRS)

1981-01-01

This bibliography lists 478 documents which relate to all heavier-than-air fixed wing aircraft exclusive of military types and those used for commercial air transport. An exception is the inclusion of commuter transport aircraft types within the general aviation category. NASA publications included in this bibliography are: conference publications (CP), reference publications (RP), technical memorandums (TM, TMX), technical notes (TN), technical papers (TP), and contractor reports (CR). In addition, papers and articles on NASA general aviation programs published by technical societies (AIAA, SAE, etc.) are included, as well as those listed in NASA's Scientific and Technical Aerospace Reports (STAR) Journal. Author and subject indexes are also provided to facilitate use of the bibliography.

FY 1978 scientific and technical reports, articles, papers, and presentations. [bibliography

NASA Technical Reports Server (NTRS)

White, O. L. (Compiler)

1978-01-01

Abstracts of 73 technical papers published or presented by MSFC personnel in FY-78 are presented. In addition, over 400 papers by contractors to that facility are listed along with the STAR document number for each report. Titles of 208 additional papers already cleared for publication are included.

[Scientific stealing (Plagiarism) in medical journals].

PubMed

Enöz, Murat

2007-01-01

The obligation to publish academic papers in order to get academic rank has made medical doctors more ambitious to publish faster and more papers. According to the ethical and legal rules in our country and in the world, if an idea or technical methods of another person is used in a medical journal, the owner of the method or idea and its publication has to be cited. If an idea, information or a technical method of another scientist is published without citation as if it was one's own idea it's called "Plagiarism". Despite the prohibitive laws and rules, this scientific stealing has become an increasing problem for medical journals worldwide.

Final Technical Report: Sparse Grid Scenario Generation and Interior Algorithms for Stochastic Optimization in a Parallel Computing Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mehrotra, Sanjay

2016-09-07

The support from this grant resulted in seven published papers and a technical report. Two papers are published in SIAM J. on Optimization [87, 88]; two papers are published in IEEE Transactions on Power Systems [77, 78]; one paper is published in Smart Grid [79]; one paper is published in Computational Optimization and Applications [44] and one in INFORMS J. on Computing [67]). The works in [44, 67, 87, 88] were funded primarily by this DOE grant. The applied papers in [77, 78, 79] were also supported through a subcontract from the Argonne National Lab. We start by presenting ourmore » main research results on the scenario generation problem in Sections 1–2. We present our algorithmic results on interior point methods for convex optimization problems in Section 3. We describe a new ‘central’ cutting surface algorithm developed for solving large scale convex programming problems (as is the case with our proposed research) with semi-infinite number of constraints in Section 4. In Sections 5–6 we present our work on two application problems of interest to DOE.« less

The 1989 JSC bibliography of scientific and technical papers

NASA Technical Reports Server (NTRS)

Hutchins, Nancy (Compiler)

1991-01-01

This document is a compilation of Lyndon B. Johnson Space Center contributions to the scientific and technical literature in aerospace and life sciences made during calendar year 1989. Citations include NASA formal series reports, journal articles, conference and symposium presentations, papers published in proceedings or other collective works, and seminar and workshop results.

Evolution of Scientific and Technical Information Distribution

NASA Technical Reports Server (NTRS)

Esler, Sandra; Nelson, Michael L.

1998-01-01

World Wide Web (WWW) and related information technologies are transforming the distribution of scientific and technical information (STI). We examine 11 recent, functioning digital libraries focusing on the distribution of STI publications, including journal articles, conference papers, and technical reports. We introduce 4 main categories of digital library projects: based on the architecture (distributed vs. centralized) and the contributor (traditional publisher vs. authoring individual/organization). Many digital library prototypes merely automate existing publishing practices or focus solely on the digitization of the publishing cycle output, not sampling and capturing elements of the input. Still others do not consider for distribution the large body of "gray literature." We address these deficiencies in the current model of STI exchange by suggesting methods for expanding the scope and target of digital libraries by focusing on a greater source of technical publications and using "buckets," an object-oriented construct for grouping logically related information objects, to include holdings other than technical publications.

[Book review] Waterfowl ecology and management: Selected readings

USGS Publications Warehouse

Krapu, Gary L.

1983-01-01

This book is a compilation of papers from the extensive and varied published literature on the ecology and management of waterfowl. The 125 technical papers reprinted in this book are arranged in eight major sections and are from 21 journals, government reports, several books, and proceedings of symposia and annual conferences. The most frequent sources of papers are The Journal of Wildlife Management, The Auk, Transactions North American Wildlife and Natural Resources Conference, and Wildfowl. These readings span the period from 1937 through 1981. A majority of the technical papers was published during the sixties and seventies, reflecting the expansion of waterfowl research during that period. The front cover and the introductory page of each section are illustrated with black-and-white drawings of North American waterfowl by D. R. Barrick.

A second chance for authors of hijacked journals to publish in legitimate journals.

PubMed

Jalalian, Mehrdad

2015-01-01

This article proposes the republication of articles that have previously been published in counterfeit websites of hijacked journals. The paper also discusses the technical and ethical aspects of republishing such articles.

Locally Controlled Scholarly Publishing via the Internet: The Guild Model.

ERIC Educational Resources Information Center

Kling, Rob; Spector, Lisa; McKim, Geoff

2002-01-01

Discusses use of the Internet for scholarly communication; describes five publishing models where readers can access articles without a fee, including electronic journals; and explains a sixth model, called the Guild Publishing Model, which involves research publication series called working papers or technical reports that are sponsored by…

Technical Degrees and Higher Vocational Education

ERIC Educational Resources Information Center

Hordern, Jim

2017-01-01

This paper focuses on the proposals for the introduction of "technical degrees" in English higher education institutions advanced by the Labour Party's Liam Byrne in a document entitled "Robbins Rebooted" which was published in August 2014 by the Social Market Foundation. The context and rationale for the proposed technical…

Modular Radioisotope Thermoelectric Generator (RTG) Program. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-12-31

Section 2.0 of this report summarizes the MOD-RTG reference flight design, and Section 3.0 discusses the Ground Demonstration System design. Multicouple technology development is discussed in Section 4.0, and Section 5.0 lists all published technical papers prepared during the course of the contract.

Research in network management techniques for tactical data communications networks

NASA Astrophysics Data System (ADS)

Boorstyn, R.; Kershenbaum, A.; Maglaris, B.; Sarachik, P.

1982-09-01

This is the final technical report for work performed on network management techniques for tactical data networks. It includes all technical papers that have been published during the control period. Research areas include Packet Network modelling, adaptive network routing, network design algorithms, network design techniques, and local area networks.

Interrelationships among Librarians, Engineers, and Publishers in the Publication Process.

ERIC Educational Resources Information Center

Jackson, Eugene B.

This paper advocates the involvement of librarians in the publishing process and examines the mechanics of that process. Concerns of librarians, engineers, and publishers are delineated, with examples taken from the internal and external dissemination of technical information by a major U.S. government research agency and various large industrial…

Effect of using of IEEJ (Power and Energy) Technical Papers on Engineering Education

NASA Astrophysics Data System (ADS)

Shirakawa, Shingo

The IEEJ has published useful papers for electric power and energy systems. These papers published in IEEJ transactions contribute to special engineers to receive the doctor degree or understand newly developed technologies etc. But, it is very important to know the impression of young students about IEEJ transactions papers considering the technology transfer. This paper describes reaction comments of next generation university students under learning engineering of design and drawing of power equipments in 2009 after the Lehman Shock (the Lehman Brothers' worldwide economical collapse dated Sept. 15 2008).

Creative revision - From rough draft to published paper

NASA Technical Reports Server (NTRS)

Buehler, M. F.

1976-01-01

The process of revising a technical or scientific paper can be performed more efficiently by the people involved (author, co-author, supervisor, editor) when the revision is controlled by breaking it into a series of steps. The revision process recommended here is based on the levels-of-edit concept that resulted from a study of the technical editorial function at the Jet Propulsion Laboratory of the California Institute of Technology. Types of revision discussed are Substantive, Policy, Language, Mechanical Style, Format, Integrity, and Copy Clarification.

75 FR 72802 - Solicitation of Applications for the Planning and Local Technical Assistance Programs

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-26

... . Applications also may be delivered via hand delivery, postal mail or courier service in paper (hard copy... application. Alternatively, an applicant eligible for assistance under this notice may request a paper (hard... applications is published in the Federal Register. The content of applications is the same for paper...

75 FR 8999 - Agency Information Collection Activities: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-26

.... Methodological findings may be presented externally in technical papers at conferences, published in the... represent several methodological improvement projects. \\2\\ This number refers to the science, engineering...

How to reduce scientific irreproducibility: the 5-year reflection.

PubMed

Fiala, Clare; Diamandis, Eleftherios P

2017-10-26

We discuss in depth six causes of scientific irreproducibility and their ramifications for the clinical sciences: fraud, unfounded papers published by prominent authorities, bias, technical deficiencies, fragmented science and problems with big data. Some proposed methods to combat this problem are briefly described, including an effort to replicate results from some high impact papers and a proposal that authors include detailed preclinical data in papers with supposedly high translational value. We here advocate for a 5-year reflection on papers with seemingly high clinical/translational potential, published alongside the original paper where authors reflect on the quality, reproducibility and impact of their findings. These reflections can be used as a benchmark for credibility, and begin a virtuous cycle of improving the quality of published findings in the literature.

Eleventh workshop on geothermal reservoir engineering: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.

1986-01-23

The Eleventh Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 21-23, 1986. The attendance was up compared to previous years, with 144 registered participants. Ten foreign countries were represented: Canada, England, France, Iceland, Indonesia, Italy, Japan, Mexico, New Zealand and Turkey. There were 38 technical presentations at the Workshop which are published as papers in this Proceedings volume. Six technical papers not presented at the Workshop are also published and one presentation is not published. In addition to these 45 technical presentations or papers, the introductory address was given by J. E. Mock from the Departmentmore » of Energy. The Workshop Banquet speaker was Jim Combs of Geothermal Resources International, Inc. We thank him for his presentation on GEO geothermal developments at The Geysers. The chairmen of the technical sessions made an important contribution to the Workshop. Other than Stanford faculty members they included: M. Gulati, E. Iglesias, A. Moench, S. Prestwich, and K. Pruess. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank J.W. Cook, J.R. Hartford, M.C. King, A.E. Osugi, P. Pettit, J. Arroyo, J. Thorne, and T.A. Ramey for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment. The Eleventh Workshop was supported by the Geothermal Technology Division of the U.S. Department of Energy through Contract DE-AS03-80SF11459. We deeply appreciate this continued support. January 1986 H.J. Ramey, Jr. P. Kruger R.N. Horne W.E. Brigham F.G. Miller J.R. Counsil« less

A summary of trauma and trauma-related papers published in BJOMS during 2008-2009.

PubMed

Kusanale, Atul; Mackenzie, Neil; Arakeri, Gururaj; McLeod, Niall; Brennan, Peter A

2010-09-01

This paper provides a summary of the 49 trauma and related papers published in British Journal of Oral and Maxillofacial Surgery during the period January 2008 to December 2009. 16/49 (32%) of these publications were full length articles, which covered areas such as epidemiology, service provision, materials and operative surgery. In addition there were other articles including short communications, technical notes, letters to the editor and interesting cases. Whilst fewer full length articles were published compared to the other sub-specialties, it was reassuring to see that the studies represent all aspects of trauma. More basic science and randomized control studies relating to trauma need to be encouraged. Copyright 2010 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Aeroelastic, CFD, and Dynamics Computation and Optimization for Buffet and Flutter Applications

NASA Technical Reports Server (NTRS)

Kandil, Osama A.

1997-01-01

Accomplishments achieved during the reporting period are listed. These accomplishments included 6 papers published in various journals or presented at various conferences; 1 abstract submitted to a technical conference; production of 2 animated movies; and a proposal for use of the National Aerodynamic Simulation Facility at NASA Ames Research Center for further research. The published and presented papers and animated movies addressed the following topics: aeroelasticity, computational fluid dynamics, structural dynamics, wing and tail buffet, vortical flow interactions, and delta wings.

Chemical weathering on Mars. Collection of papers. LPI-MSATT Workshop on Chemical Weathering on Mars, Cocoa Beach, FL (USA), 10 - 12 Sep 1992.

NASA Astrophysics Data System (ADS)

Burns, R. G.; Banin, A.

1993-10-01

The Workshop on Chemical Weathering on Mars consisted of thirty papers, extended abstracts of which were published in the LPI Technical Report, No. 92-04. The collection of seven papers in this issue report new data and interpretations about the chemical evolution of the Martian surface.

Geophysical abstracts 167, October-December 1956

USGS Publications Warehouse

Rabbitt, Mary C.; Vitaliano, Dorothy B.; Vesselowsky, S.T.; ,

1956-01-01

Geophysical Abstracts includes abstracts of technical papers and books on the physics of the solid earth, the application of physical methods and techniques to geologic problems, and geophysical exploration. The table of contents, which is alphabetically arranged, shows the material covered.Abstracts are prepared only of material that is believed to be generally available. Ordinarily abstracts are not published of material with limited circulation (such as dissertations, open-file reports, or memoranda) or of other papers presented orally at meetings unless summaries of substantial length are published. Abstracts of papers in Japanese and Chinese are based on abstracts or summaries in a western language accompanying the paper.

Geophysical abstracts 164, January-March 1956

USGS Publications Warehouse

Rabbitt, Mary C.; Vitaliano, Dorothy B.; Vesselowsky, S.T.; ,

1956-01-01

Geophysical Abstracts includes abstracts of technical papers and books on the physics of the solid earth, the application of physical methods and techniques to geologic problems, and geophysical exploration. A new table of contents, alphabetically arranged, has been adapted to show more clearly the material covered.Abstracts are prepared only of material that is believed to be generally available. Ordinarily abstracts are not published of material with limited circulation (such as dissertations, open-file reports, or memoranda) or of papers presented orally at meetings unless summaries of substantial length are published. Abstracts of papers in Japanese and Chinese are based on abstracts or summaries in a western language accompanying the paper.

Geophysical abstracts 166, July-September 1956

USGS Publications Warehouse

Rabbitt, Mary C.; Vitaliano, Dorothy B.; Vesselowsky, S.T.; ,

1956-01-01

Geophysical Abstracts includes abstracts of technical papers and books on the physics of the solid earth, the application of physical methods and techniques to geologic problems, and geophysical exploration. The table of contents, which is alphabetically arranged, shows the material covered.Abstracts are prepared only of material that is believed to be generally available. Ordinarily abstracts are not published of material with limited circulation (such as dissertations, open-file reports, or memoranda) or of other papers presented orally at meetings unless summaries of substantial length are published. Abstracts of papers in Japanese and Chinese are based on abstracts or summaries in a western language accompanying the paper.

Geophysical abstracts 165, April-June 1956

USGS Publications Warehouse

Rabbitt, Mary C.; Vitaliano, Dorothy B.; Vesselowsky, S.T.; ,

1956-01-01

Geophysical Abstracts includes abstracts of technical papers and books on the physics of the solid earth, the application of physical methods and techniques to geologic problems, and geophysical exploration. The table of contents, which is alphabetically arranged, shows the material covered.Abstracts are prepared only of material that is believed to be generally available. Ordinarily abstracts are not published of material with limited circulation (such as dissertations, open-file reports, or memoranda) or of other papers presented orally at meetings unless summaries of substantial length are published. Abstracts of papers in Japanese and Chinese are based on abstracts or summaries in a western language accompanying the paper.

Buckets, Clusters and Dienst

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Maly, Kurt; Shen, Stewart N. T.

1997-01-01

In this paper we describe NCSTRL+, a unified, canonical digital library for scientific and technical information (STI). NCSTRL+ is based on the Networked Computer Science Technical Report Library (NCSTRL), a World Wide Web (WWW) accessible digital library (DL) that provides access to over 80 university departments and laboratories. NCSTRL+ implements two new technologies: cluster functionality and publishing "buckets." We have extended the Dienst protocol, the protocol underlying NCSTRL, to provide the ability to "cluster" independent collections into a logically centralized digital library based upon subject category classification, type of organization, and genres of material. The concept of "buckets" provides a mechanism for publishing and managing logically linked entities with multiple data formats. The NCSTRL+ prototype DL contains the holdings of NCSTRL and the NASA Technical Report Server (NTRS). The prototype demonstrates the feasibility of publishing into a multi-cluster DL, searching across clusters, and storing and presenting buckets of information. We show that the overhead for these additional capabilities is minimal to both the author and the user when compared to the equivalent process within NCSTRL.

Technical Topic 3.2.2.d Bayesian and Non-Parametric Statistics: Integration of Neural Networks with Bayesian Networks for Data Fusion and Predictive Modeling

DTIC Science & Technology

2016-05-31

and included explosives such as TATP, HMTD, RDX, RDX, ammonium nitrate , potassium perchlorate, potassium nitrate , sugar, and TNT. The approach...Distribution Unlimited UU UU UU UU 31-05-2016 15-Apr-2014 14-Jan-2015 Final Report: Technical Topic 3.2.2. d Bayesian and Non- parametric Statistics...of Papers published in non peer-reviewed journals: Final Report: Technical Topic 3.2.2. d Bayesian and Non-parametric Statistics: Integration of Neural

Science Directorate Publications and Presentations, January 1 - December 31, 2002

NASA Technical Reports Server (NTRS)

Summers, F. G. (Compiler)

2003-01-01

This Technical Memorandum lists the significant publications and presentations of the Science Directorate during the period January 1-December 31, 2002. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publication in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature.

Final Technical Report: Fundamental Research on the Fractionation of Carbon Isotopes during Photosynthesis, New Interpretations of Terrestrial Organic Carbon within Geologic Substrates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schubert, Brian; Jahren, A. Hope

The goal for the current grant period (2013 – 2016) was to quantify the effect of changing atmospheric carbon dioxide concentration (pCO2) on published terrestrial carbon isotope excursion events. This work supported four scientists across multiple career stages, and resulted in 5 published papers.

[Application of ultrasound counter currentextraction in patent of traditional Chinese medicine].

PubMed

Miao, Yan-ni; Wu, Bin; Yue, Xue-lian

2015-07-01

The patent information of ultrasound countercurrent extraction used in traditional Chinese medicine was analyzed in this paper by the samples from Derwent World Patent Database (DWPI) and the Chinese Patent Abstracts Database (CNABS). The application of ultrasound countercurrent was discussed with the patent applicant,the amount of the annual distribution, and the pharmaceutical raw materials and other aspects. While the technical parameters published in the patent was deeply analyzed, such as material crushing, extraction solvent, extraction time and temperature, extraction equipment and ultrasonic frequency. Thought above research, various technical parameters of ultrasound countercurrent extraction used in traditional Chinese was summarize. The analysis conclusion of the paper can be used in discovering the technical advantages, optimizing extraction conditions, and providing a reference to extraction technological innovation of traditional Chinese medicine.

Technical Writing Teachers and the Challenges of Desktop Publishing.

ERIC Educational Resources Information Center

Kalmbach, James

1988-01-01

Argues that technical writing teachers must understand desktop publishing. Discusses the strengths that technical writing teachers bring to desktop publishing, and the impact desktop publishing will have on technical writing courses and programs. (ARH)

Fourdrinier-Machine Tender (paper & pulp, wallboard) 539.782; Back Tender, Paper Machine (paper & pulp) 534.782--Technical Report on Development of USTES Aptitude Test Battery.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

Twelfth Thermal and Fluids Analysis Workshop

NASA Technical Reports Server (NTRS)

Majumdar, Alok (Compiler)

2002-01-01

The Twelfth Thermal and Fluids Analysis Workshop (TFAWS 01) was held at the Bevill Center, The University of Alabama in Huntsville, Huntsville, Alabama, September 10-14, 2001. The theme for the hands-on training workshop and conference was "Engineering Excellence and Advances in the New Millenium." Forty-five technical papers were presented in four sessions: (1) Thermal Spacecraft/Payloads, (2) Thermal Propulsion/Vehicles, (3) Interdisciplinary Papers, and (4) Fluids Papers. Thirty-nine papers were published in these proceedings. The remaining six papers were not available in electronic format at the time of publication. In addition to the technical papers, there were (a) nine hands-on classes on thermal and flow analyses software, (b) thirteen short courses and product overview lectures, (c) five keynote lectures and, (d) panel discussions consisting of eight presentations. The workshop resulted in participation of 195 persons representing NASA Centers, Government agencies, aerospace industries, academia, software providers, and private corporations.

The Tenth Thermal and Fluids Analysis Workshop

NASA Technical Reports Server (NTRS)

Majumdar, Alok (Compiler); McConnaughey, Paul (Technical Monitor)

2001-01-01

The Tenth Thermal arid Fluids Analysis Workshop (TFAWS 99) was held at the Bevill Center, University of Alabama in Huntsville, Huntsville, Alabama, September 13-17, 1999. The theme for the hands-on training workshop and conference was "Tools and Techniques Contributing to Engineering Excellence". Forty-seven technical papers were presented in four sessions. The sessions were: (1) Thermal Spacecraft/Payloads, (2) Thermal Propulsion/Vehicles, (3) Interdisciplinary Paper, and (4) Fluids Paper. Forty papers were published in these proceedings. The remaining seven papers were not available in electronic format at the time of publication. In addition to the technical papers, there were (a) nine hands-on classes on thermal and flow analyses software, (b) twelve short courses, (c) thirteen product overview lectures, and (d) three keynote lectures. The workshop resulted in participation of 171 persons representing NASA Centers, Government agencies, aerospace industries, academia, software providers, and private corporations.

Mentorship for operational research capacity building: hands-on or hands-off?

PubMed Central

Marais, B.; Kool, B.; Ram, S.; Kumar, A. M. V.; Gounder, S.; Viney, K.; Brostrom, R.; Roseveare, C.; Bissell, K.; Reid, A. J.; Zachariah, R.; Hill, P. C.

2014-01-01

Mentorship is a key feature of operational research training courses run by the International Union Against Tuberculosis and Lung Disease and Médecins Sans Frontières. During the recent South Pacific paper writing module, the faculty discussed ‘hands-on’ mentorship (direct technical assistance) vs. ‘hands-off’ mentorship (technical advice). This article explores the advantages and disadvantages of each approach. Our collective experience indicates that ‘hands-on’ mentorship is a valuable learning experience for the participant and a rewarding experience for the mentor. This approach increases the likelihood of successful course completion, including publishing a well written paper. However, mentors must allow participants to lead and take ownership of the paper, in keeping with a first author position. PMID:26477290

Mentorship for operational research capacity building: hands-on or hands-off?

PubMed

Harries, A D; Marais, B; Kool, B; Ram, S; Kumar, A M V; Gounder, S; Viney, K; Brostrom, R; Roseveare, C; Bissell, K; Reid, A J; Zachariah, R; Hill, P C

2014-06-21

Mentorship is a key feature of operational research training courses run by the International Union Against Tuberculosis and Lung Disease and Médecins Sans Frontières. During the recent South Pacific paper writing module, the faculty discussed 'hands-on' mentorship (direct technical assistance) vs. 'hands-off' mentorship (technical advice). This article explores the advantages and disadvantages of each approach. Our collective experience indicates that 'hands-on' mentorship is a valuable learning experience for the participant and a rewarding experience for the mentor. This approach increases the likelihood of successful course completion, including publishing a well written paper. However, mentors must allow participants to lead and take ownership of the paper, in keeping with a first author position.

Science and Exploration Research Office Publications and Presentations, January 1-December 31, 2006

NASA Technical Reports Server (NTRS)

Summers, F. G. (Compiler)

2007-01-01

This Technical Memorandum (TM) lists the significant publications and presentations of the Science and Exploration Research Office during the period January 1-December 31, 2006. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature and Presentations (arranged alphabetically by title). Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publication in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature.

Magnetic Earth Ionosphere Resonant Frequencies

NASA Technical Reports Server (NTRS)

Spaniol, Craig

1994-01-01

The Community College Division is pleased to report progress of NASA funded research at West Virginia State College. During this reporting period, the project research group has continued with activities to develop instrumentation capability designed to monitor resonant cavity frequencies in the atmospheric region between the Earth's surface and the ionosphere. In addition, the project's principal investigator, Dr. Craig Spaniol, and NASA technical officer, Dr. John Sutton, have written and published technical papers intended to expand the scientific and technical framework needed for project research. This research continues to provide an excellent example of government and education working together to provide significant research in the college environment. This cooperative effort has provided many students with technical project work which compliments their education.

Urology technical and non-technical skills development: the emerging role of simulation.

PubMed

Rashid, Prem; Gianduzzo, Troy R J

2016-04-01

To review the emerging role of technical and non-technical simulation in urological education and training. A review was conducted to examine the current role of simulation in urology training. A PUBMED search of the terms 'urology training', 'urology simulation' and 'urology education' revealed 11,504 titles. Three hundred and fifty-seven abstracts were identified as English language, peer reviewed papers pertaining to the role of simulation in urology and related topics. Key papers were used to explore themes. Some cross-referenced papers were also included. There is an ongoing need to ensure that training time is efficiently utilised while ensuring that optimal technical and non-technical skills are achieved. Changing working conditions and the need to minimise patient harm by inadvertent errors must be taken into account. Simulation models for specific technical aspects have been the mainstay of graduated step-wise low and high fidelity training. Whole scenario environments as well as non-technical aspects can be slowly incorporated into the curriculum. Doing so should also help define what have been challenging competencies to teach and evaluate. Dedicated time, resources and trainer up-skilling are important. Concurrent studies are needed to help evaluate the effectiveness of introducing step-wise simulation for technical and non-technical competencies. Simulation based learning remains the best avenue of progressing surgical education. Technical and non-technical simulation could be used in the selection process. There are good economic, logistic and safety reasons to pursue the process of ongoing development of simulation co-curricula. While the role of simulation is assured, its progress will depend on a structured program that takes advantage of what can be delivered via this medium. Overall, simulation can be developed further for urological training programs to encompass technical and non-technical skill development at all stages, including recertification. © 2015 The Authors BJU International © 2015 BJU International Published by John Wiley & Sons Ltd.

VizieR Online Data Catalog: HR8752 evolving through the void (Nieuwenhuijzen+ 2012)

NASA Astrophysics Data System (ADS)

Nieuwenhuijzen, H.; de Jager, C.; Kolka, I.; Israelian, G.; Lobel, A.; Zsoldos, E.; Maeder, A.; Meynet, G.

2012-06-01

The main paper on the hypergiant HR8752 evolving through the void combines observational data from various sources: new spectral data, new and already published (B-V), V data. it also describes a new three-dimensional chebychev interpolating code, and gives information on the temperature calibration for hypergiants, and adds some extra Tables on colour excess and historical context (cf. below). The electronic appendix contains a number of tables, too large for publishing in the paper. In the text and in the appendix, they are referred to as Table Axx, resp. Cxx. We note, however, that tables A1.1 to A1.6 in Section 2 of the main paper are here referred to as tables appena11 to appena16. The observational tables appena11 to appena16, appena2, appena3, appena4 all refer to Section 2 in the main paper, while tables appena5, appena6, appena7, appena8 are used in Section 3 of the main paper. The technical table appenc1 describes the three-dimensional chebychev interpolation method used in Section 2 of the main paper. The second technical table appenc2 describes the (hypergiant) temperature calibration and transformation codes between Mk, Teff, and (B-V) data, used in Section 3 of the main paper. Table appena9 discusses some measured colour excesses (Section 3.3 of the main paper). Table appena10 discusses the possibility of historical context (Section 5.11 of the main paper). (20 data files).

Development of noise emission measurement specifications for color printing multifunctional devices

NASA Astrophysics Data System (ADS)

Kimizuka, Ikuo

2005-09-01

Color printing (including copying) is becoming more popular application in home, as well as in offices. Existing de jule and/or industrial standards (such as ISO 7779, ECMA-74, ANSI S12.10 series, etc.), however, state only monochrome patterns, which are mainly intended for acoustic noise testing of mechanical impact type printers. This paper discusses the key issues and corresponding resolutions for development of color printing patterns for acoustic noise measurements. The results of these technical works will be published by JBMS-74 (new industry standard of JBMIA within 2005), and hopefully be the technical basis of updating other standards mentioned above. This paper also shows the development processes and key features of proposed patterns.

Geological Survey Research 1966, Chapter A

USGS Publications Warehouse

,

1966-01-01

'Geological Survey Research 1966' is the seventh annual review of the econamic and scientific work of the U.S. Geological Survey. As in previous years the purpose of the volume is to make available promptly to the public the highlights of Survey investigations. This year the volume consists of 4 chapters (A through D) of Professional Paper 550. Chapter A contains a summary of significant results, and the remaining chapters are made up of collections of short technical papers. Many of the results summarized in chapter A are discussed in greater detail in the short papers or in reports listed in 'Publications in Fiscal Year 1966,' beginning on page A265. The tables of contents for chapters B through D are listed on pages A259-A264. Numerous Federal, State, county, and municipal agencies listed on pages A211-A215 cooperated financially with the Geological Survey during fiscal 1966 and have contributed significantly to the results reported here. They are identified where appropriate in the short technical papers that have appeared in Geological Survey Research and in papers published cooperatively, but generally are not identified in the brief statements in chapter A. Many individuals on the staff of the Geological Survey have contributed to 'Geological Survey Research 1966.' Reference is made to only a few. Frank W. Trainer, Water Resources Division, was responsible for organizing and assembling chapter A and for critical review of papers in chapters B-D, assisted by Louis Pavlides, Geologic Division. Marston S. Chase, Publications Division, was in charge of production aspects of the series, assisted by Jesse R. Upperco in technical editing, and William H. Elliott and James R. Hamilton in planning and preparing illustrations. The volume for next year, 'Geological Survey Research 1967,' will be published as chapters af Professional Paper 5715. Previous volumes are listed below, with their series designations. Gealagical Survey Research 1960-Prof. Paper 400 Gealagical Survey Research 1961-Prof. Paper 424 Gealagical Survey Research 1962-Prof. Paper 450 Gealagical Survey Research 1963-Prof. Paper 475 Gealagical Survey Research 1964-Prof. Paper 501 Gealagical Survey Research 1965-Prof. Paper 525

A basic interpretation of the technical language of radiation processing

NASA Astrophysics Data System (ADS)

Deeley, Catherine M.

2004-09-01

For the food producer contemplating the purchase of radiation processing equipment the task of evaluating the strengths and weaknesses of the available technologies, electron beam (E-beam), X-ray and gamma, to determine the best option for their application, is onerous. Not only is the level of investment daunting but also, to be sure of comparing like with like, the evaluator requires a basic understanding of the science underpinning radiation processing. There have been many papers published that provide technical specialists with a rigorous interpretation of this science (In: Gaughran, E.R.L., Goudie, A.J. (Eds.), Technical Developments and Prospects of Sterilization by Ionizing Radiation, International Conference, Vienna. Multiscience Publications Ltd., pp. 145-172). The objective for this paper is to give non-specialists an introduction to the language of radiation processing and to clarify some of the terminology associated with the use of radioactive sources for this application.

Sport prostheses and prosthetic adaptations for the upper and lower limb amputees: an overview of peer reviewed literature.

PubMed

Bragaru, Mihai; Dekker, Rienk; Geertzen, Jan H B

2012-09-01

Sport prostheses are used by both upper- and lower-limb amputees while participating in sports and other physical activities. Although the number of these devices has increased over the past decade, no overview of the peer reviewed literature describing them has been published previously. Such an overview will allow specialists to choose appropriate prostheses based on available scientific evidence rather than on personal experience or preference. To provide an overview of the sport prostheses as they are described by the papers published in peer reviewed literature. Literature review. Four electronic databases were searched using free text and Medical Subject Headings (MESH) terms. Papers were included if they concerned a prosthesis or a prosthetic adaptation used in sports. Papers were excluded if they did not originate from peer reviewed sources, if they concerned prostheses for body parts other than the upper or lower limbs, if they concerned amputations distal to the wrist or ankle, or if they were written in a language other than English. Twenty-four papers were included in this study. The vast majority contained descriptive data and consisted of expert opinions and technical notes. Data concerning the energy efficiency, technical characteristics and special mechanical properties of prostheses or prosthetic adaptations for sports, other than running, are scarce.

How to Search, Write, Prepare and Publish the Scientific Papers in the Biomedical Journals

PubMed Central

Masic, Izet

2011-01-01

This article describes the methodology of preparation, writing and publishing scientific papers in biomedical journals. given is a concise overview of the concept and structure of the System of biomedical scientific and technical information and the way of biomedical literature retreival from worldwide biomedical databases. Described are the scientific and professional medical journals that are currently published in Bosnia and Herzegovina. Also, given is the comparative review on the number and structure of papers published in indexed journals in Bosnia and Herzegovina, which are listed in the Medline database. Analyzed are three B&H journals indexed in MEDLINE database: Medical Archives (Medicinski Arhiv), Bosnian Journal of Basic Medical Sciences and Medical Gazette (Medicinki Glasnik) in 2010. The largest number of original papers was published in the Medical Archives. There is a statistically significant difference in the number of papers published by local authors in relation to international journals in favor of the Medical Archives. True, the Journal Bosnian Journal of Basic Medical Sciences does not categorize the articles and we could not make comparisons. Journal Medical Archives and Bosnian Journal of Basic Medical Sciences by percentage published the largest number of articles by authors from Sarajevo and Tuzla, the two oldest and largest university medical centers in Bosnia and Herzegovina. The author believes that it is necessary to make qualitative changes in the reception and reviewing of papers for publication in biomedical journals published in Bosnia and Herzegovina which should be the responsibility of the separate scientific authority/ committee composed of experts in the field of medicine at the state level. PMID:23572850

Common editorial mistakes in journal submissions

USDA-ARS?s Scientific Manuscript database

In today’s “Wild West” of scientific publishing, it is the author’s—not the publisher’s—responsibility to make sure that an accepted paper is well-written and in correct English. Given that most authors are not grammarians or technical editors, and also that English may not be their first language...

Connecticut Community Colleges: At a Glance.

ERIC Educational Resources Information Center

Connecticut State Board of Trustees of Community-Technical Colleges, Hartford.

This paper presents the 1999-2000 report published by the Connecticut Board of Trustees of Community-Technical Colleges. It includes the following items: (1) a statement of mission and statutory responsibility of Connecticut's community colleges; (2) a description of the public services rendered by Connecticut's community colleges; (3) an outline…

Technical evaluation report of AGARD Technical Evaluation Meeting on Unsteady Aerodynamics: Fundamentals and Applications to Aircraft Dynamics

NASA Technical Reports Server (NTRS)

Mabey, D. G.; Chambers, J. R.

1986-01-01

From May 6 to 9, 1985, the Fluid Dynamics Panel and Flight Mechanics Panel of AGARD jointly arranged a Symposium on Unsteady Aerodynamics-Fundamentals and Applications to Aircraft Dynamics at the Stadthall, Goettingen, West Germany. This Symposium was organized by an international program committee chaired by Dr. K. J. Orlik-Ruckemann of the Fluid Dynamics Panel. The program consisted of five sessions grouped in two parts: (1) Fundamentals of Unsteady Aerodynamics; and (2) Applications to Aircraft Dynamics. The 35 papers presented at the 4 day meeting are published in AGARD CP 386 and listed in the Appendix. As the papers are already available and cover a very wide field, the evaluators have offered brief comments on every paper, followed by an overall evaluation of the meeting, together with some general conclusions and recommendations.

AAPG forms environmental unit; Geosat moving

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-07-20

This paper reports that the American Association of Petroleum Geologists has established a new environmental geology division, while a geology related committee is moving from Oklahoma. AAPG set up a Division of Environmental Geosciences to provide services and information to its members working in environmental geosciences, the Bernold M. Bruno Hanson of Midland, Tex., the DEG's first president. The division will publish a newsletter in October, and plans are being set to solicit technical articles for consideration by the AAPG Bulletin and for a possible future separate DEG technical publication.

Visiting Scholars Program in Building Science at UC Berkeley

Science.gov Websites

part of the evaluation process, as it is essential that there is a relationship between your interests and the research being conducted at CBE. Visiting scholars must have some prior research experience with information on education, research experience, papers published and technical skills (e.g

Estimating Apprentice and Trainee Completion and Attrition Rates Using a "Life Tables" Approach. Technical Paper

ERIC Educational Resources Information Center

Karmel, Tom; Mlotkowski, Peter

2010-01-01

The proportion of apprentices and trainees completing their contract of training has received considerable attention in recent years. To support public discussion, the National Centre for Vocational Education Research (NCVER) has been publishing tabulations of both completion and attrition rates. Up until recently, the approach taken was to…

Preparing Students for Jobs: Managing and Writing for Specialized Magazines.

ERIC Educational Resources Information Center

Eynon, Derry

In this paper, two magazine courses offered at Colorado State University as part of the Technical-Business Journalism concentration are described in terms of course content, class assignments, and course objectives. The course entitled "Writing for Specialized Audiences" assumes that the majority of magazines published today are edited for readers…

Digital-Computer Processing of Graphical Data. Final Report.

ERIC Educational Resources Information Center

Freeman, Herbert

The final report of a two-year study concerned with the digital-computer processing of graphical data. Five separate investigations carried out under this study are described briefly, and a detailed bibliography, complete with abstracts, is included in which are listed the technical papers and reports published during the period of this program.…

A Survey of Progress in Coding Theory in the Soviet Union. Final Report.

ERIC Educational Resources Information Center

Kautz, William H.; Levitt, Karl N.

The results of a comprehensive technical survey of all published Soviet literature in coding theory and its applications--over 400 papers and books appearing before March 1967--are described in this report. Noteworthy Soviet contributions are discussed, including codes for the noiseless channel, codes that correct asymetric errors, decoding for…

Studies of Optical Beam Phase-Conjugation and Electromagnetic Scattering Process

DTIC Science & Technology

1992-05-05

34 S.M. Jensen and R.W. Hellwarth, Appl. Phys. Lett., 33 404, September, 1978. 3.3. " Infrared -to--optical image conversion by Bragg reflection from...paper WW2 at the 1988 Conference on Lasers and Electrooptics. 27 April 1988 at Anaheim, California. Abstract in Conference Bulletin. Summary published...in Technical Digest. Conference on Lasers and Electro-Optics (Optical Society of America, Washington, D.C., 1988). Paper WW2 . 16 4.74. "Fidelity of

Science Directorate Publications and Presentations, January 1 - December 31, 2003

NASA Technical Reports Server (NTRS)

Summers, F. G. (Compiler)

2004-01-01

This Technical Memorandum (TM) lists the significant publications and presentations of the Science Directorate during the period January 1 - December 31, 2003. Entries in the main part of the TM are categorized according to NASA Reports (arranged by report number), Open Literature and Presentations (arranged alphabetically by title). Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publication in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature. Questions or requests for additional information about the entries in this TM should be directed to Dr. A.F. Whitaker (SD01; 544-2481) or to one of the authors.

Are general surgeons able to accurately self-assess their level of technical skills?

PubMed

Rizan, C; Ansell, J; Tilston, T W; Warren, N; Torkington, J

2015-11-01

Self-assessment is a way of improving technical capabilities without the need for trainer feedback. It can identify areas for improvement and promote professional medical development. The aim of this review was to identify whether self-assessment is an accurate form of technical skills appraisal in general surgery. The PubMed, MEDLINE(®), Embase(™) and Cochrane databases were searched for studies assessing the reliability of self-assessment of technical skills in general surgery. For each study, we recorded the skills assessed and the evaluation methods used. Common endpoints between studies were compared to provide recommendations based on the levels of evidence. Twelve studies met the inclusion criteria from 22,292 initial papers. There was no level 1 evidence published. All papers compared the correlation between self-appraisal versus an expert score but differed in the technical skills assessment and the evaluation tools used. The accuracy of self-assessment improved with increasing experience (level 2 recommendation), age (level 3 recommendation) and the use of video playback (level 3 recommendation). Accuracy was reduced by stressful learning environments (level 2 recommendation), lack of familiarity with assessment tools (level 3 recommendation) and in advanced surgical procedures (level 3 recommendation). Evidence exists to support the reliability of self-assessment of technical skills in general surgery. Several variables have been shown to affect the accuracy of self-assessment of technical skills. Future work should focus on evaluating the reliability of self-assessment during live operating procedures.

100% Solids Polyurethane Sequestration Coating

DTIC Science & Technology

2014-04-11

Distribution Unlimited 100% Solids Polyurethane Sequestration Coating The views, opinions and/or findings contained in this report are those of the...Papers published in non peer-reviewed journals: 100% Solids Polyurethane Sequestration Coating Report Title Report developed under Topic #CBD13-101...Final Technical Report Contract #: W911NF-13-P-0010 Proposal #: 63958CHSB1 Project: 100% Solids Polyurethane Sequestration Coating

"Inspiration, Ideas, Encouragement": Teacher Development and Improved Use of Technology in Language Teaching through Open Educational Practice

ERIC Educational Resources Information Center

Borthwick, Kate; Gallagher-Brett, Angela

2014-01-01

This paper describes a study undertaken with language tutors who were engaged in a project to publish and create open educational resources. We sought to investigate how far working with open content could offer language tutors opportunities to develop professionally and acquire new technical knowledge for language teaching. Language educators…

An Analysis of Naval Aviation Configuration Status Accounting.

DTIC Science & Technology

1983-12-01

Audit Service Report T30211, Multilocation Audit of Configuration Management of Aeronautical Equipment, 17 August 1982. 18. United States General... Audit and Review .......... 27 III. CONFIGURATION MANAGEMENT STATUS ACCOUNTING WITHIN THE DEPARTMENT OF DEFENSE ........................... 29 A. DOD...included published ar- ticles written by both military and private industry managers, technical papers delivered at symposia and conferences, Naval Audit

Using qualitative methods to understand non-technological aspects of domestic energy efficiency

NASA Astrophysics Data System (ADS)

Ambrose, Aimee Rebecca

The overall aim of the collected published works is to investigate how different policy interventions in the field of energy efficiency (including zero carbon homes, low carbon heat networks, and domestic energy efficiency schemes) are experienced and made sense of by a range of key actors. A further aim is to understand these interventions in the context of existing theories within the field of domestic energy efficiency including socio-technical theory and Actor Network Theory. More specifically, this research advances existing knowledge in the following areas: The nature of the socio-technical challenges encountered in the introduction of more energy efficient buildings, and the importance of achieving a balance between socially acceptable and technically optimal environments. (Papers 2, 3, 4, 6 and 8). The value of qualitative research in gaining a more nuanced understanding of our relationship with the home and the implications of this for domestic energy efficiency interventions and the design of low energy buildings (all papers). The influence of tenure as determinant of access to a more energy efficient home and in particular, the stubborn and complex barriers to achieving higher standards of energy performance within the private rented sector. (Papers 1, 2, 3 and 4). The significance of identity, setting and notions of home in the context of domestic energy efficiency interventions. (Papers 1 and 4). As these themes suggest, this PhD is not just concerned with carbon reduction and energy saving as technical objects, but as a way of life. More specifically, it considers the interactions between the two and contends that technical or policy instruments, no matter how sophisticated, cannot succeed if they are not compatible with our ways of life (and ways of doing businesss) or if our ways of life cannot be reasonably adapted to acoomodate them.

Fifty Years of Flight Research: An Annotated Bibliography of Technical Publications of NASA Dryden Flight Research Center, 1946-1996

NASA Technical Reports Server (NTRS)

Fisher, David F.

1999-01-01

Titles, authors, report numbers, and abstracts are given for more than 2200 unclassified and unrestricted technical reports and papers published from September 1946 to December 1996 by NASA Dryden Flight Research Center and its predecessor organizations. These technical reports and papers describe and give the results of 50 years of flight research performed by the NACA and NASA, from the X-1 and other early X-airplanes, to the X-15, Space Shuttle, X-29 Forward Swept Wing, and X-31 aircraft. Some of the other research airplanes tested were the D-558, phase 1 and 2; M-2, HL-10 and X-24 lifting bodies; Digital Fly-By-Wire and Supercritical Wing F-8; XB-70; YF-12; AFTI F-111 TACT and MAW; F-15 HiDEC; F-18 High Alpha Research Vehicle, and F-18 Systems Research Aircraft. The citations of reports and papers are listed in chronological order, with author and aircraft indices. In addition, in the appendices, citations of 233 contractor reports, more than 200 UCLA Flight System Research Center reports and 25 video tapes are included.

The tracking, calorimeter and muon detectors of the H1 experiment at HERA

NASA Astrophysics Data System (ADS)

Abt, I.; Ahmed, T.; Aid, S.; Andreev, V.; Andrieu, B.; Appuhn, R.-D.; Arnault, C.; Arpagaus, M.; Babaev, A.; Bärwolff, H.; Bán, J.; Banas, E.; Baranov, P.; Barrelet, E.; Bartel, W.; Barth, M.; Bassler, U.; Basti, F.; Baynham, D. E.; Baze, J.-M.; Beck, G. A.; Beck, H. P.; Bederede, D.; Behrend, H.-J.; Beigbeder, C.; Belousov, A.; Berger, Ch.; Bergstein, H.; Bernard, R.; Bernardi, G.; Bernet, R.; Bernier, R.; Berthon, U.; Bertrand-Coremans, G.; Besançon, M.; Beyer, R.; Biasci, J.-C.; Biddulph, P.; Bidoli, V.; Binder, E.; Binko, P.; Bizot, J.-C.; Blobel, V.; Blouzon, F.; Blume, H.; Borras, K.; Boudry, V.; Bourdarios, C.; Brasse, F.; Braunschweig, W.; Breton, D.; Brettel, H.; Brisson, V.; Bruncko, D.; Brune, C.; Buchner, U.; Büngener, L.; Bürger, J.; Büsser, F. W.; Buniatian, A.; Burke, S.; Burmeister, P.; Busata, A.; Buschhorn, G.; Campbell, A. J.; Carli, T.; Charles, F.; Charlet, M.; Chase, R.; Clarke, D.; Clegg, A. B.; Colombo, M.; Commichau, V.; Connolly, J. F.; Cornett, U.; Coughlan, J. A.; Courau, A.; Cousinou, M.-C.; Coutures, Ch.; Coville, A.; Cozzika, G.; Cragg, D. A.; Criegee, L.; Cronström, H. I.; Cunliffe, N. H.; Cvach, J.; Cyz, A.; Dagoret, S.; Dainton, J. B.; Danilov, M.; Dann, A. W. E.; Darvill, D.; Dau, W. D.; David, J.; David, M.; Day, R. J.; Deffur, E.; Delcourt, B.; Del Buono, L.; Descamps, F.; Devel, M.; Dewulf, J. P.; De Roeck, A.; Dingus, P.; Djiki, K.; Dollfus, C.; Dowell, J. D.; Dreis, H. B.; Drescher, A.; Dretzler, U.; Duboc, J.; Ducorps, A.; Düllmann, D.; Dünger, O.; Duhm, H.; Dulny, B.; Dupont, F.; Ebbinghaus, R.; Eberle, M.; Ebert, J.; Ebert, T. R.; Eckerlin, G.; Edwards, B. W. H.; Efremenko, V.; Egli, S.; Eichenberger, S.; Eichler, R.; Eisele, F.; Eisenhandler, E.; Ellis, N. N.; Ellison, R. J.; Elsen, E.; Epifantsev, A.; Erdmann, M.; Erdmann, W.; Ernst, G.; Evrard, E.; Falley, G.; Favart, L.; Fedotov, A.; Feeken, D.; Felst, R.; Feltesse, J.; Feng, Z. Y.; Fensome, I. F.; Fent, J.; Ferencei, J.; Ferrarotto, F.; Finke, K.; Flamm, K.; Flauger, W.; Fleischer, M.; Flieser, M.; Flower, P. S.; Flügge, G.; Fomenko, A.; Fominykh, B.; Forbush, M.; Formánek, J.; Foster, J. M.; Franke, G.; Fretwurst, E.; Fröchtenicht, W.; Fuhrmann, P.; Gabathuler, E.; Gabathuler, K.; Gadow, K.; Gamerdinger, K.; Garvey, J.; Gayler, J.; Gažo, E.; Gellrich, A.; Gennis, M.; Gensch, U.; Genzel, H.; Gerhards, R.; Geske, K.; Giesgen, I.; Gillespie, D.; Glasgow, W.; Godfrey, L.; Godlewski, J.; Goerlach, U.; Goerlich, L.; Gogitidze, N.; Goldberg, M.; Goodall, A. M.; Gorelov, I.; Goritchev, P.; Gosset, L.; Grab, C.; Grässler, H.; Grässler, R.; Greenshaw, T.; Gregory, C.; Greif, H.; Grewe, M.; Grindhammer, G.; Gruber, A.; Gruber, C.; Günther, S.; Haack, J.; Haguenauer, M.; Haidt, D.; Hajduk, L.; Hammer, D.; Hamon, O.; Hampel, M.; Handschuh, D.; Hangarter, K.; Hanlon, E. M.; Hapke, M.; Harder, U.; Harjes, J.; Hartz, P.; Hatton, P. E.; Haydar, R.; Haynes, W. J.; Heatherington, J.; Hedberg, V.; Hedgecock, C. R.; Heinzelmann, G.; Henderson, R. C. W.; Henschel, H.; Herma, R.; Herynek, I.; Hildesheim, W.; Hill, P.; Hill, D. L.; Hilton, C. D.; Hladký, J.; Hoeger, K. C.; Hopes, R. B.; Horisberger, R.; Hrisoho, A.; Huber, J.; Huet, Ph.; Hufnagel, H.; Huot, N.; Huppert, J.-F.; Ibbotson, M.; Imbault, D.; Itterbeck, H.; Jabiol, M.-A.; Jacholkowska, A.; Jacobsson, C.; Jaffré, M.; Janoth, J.; Jansen, T.; Jean, P.; Jeanjean, J.; Jönsson, L.; Johannsen, K.; Johnson, D. P.; Johnson, L.; Jovanovic, P.; Jung, H.; Kalmus, P. I. P.; Kant, D.; Kant, D.; Kantel, G.; Karstensen, S.; Kasarian, S.; Kaschowitz, R.; Kasselmann, P.; Kathage, U.; Kaufmann, H. H.; Kemmerling, G.; Kenyon, I. R.; Kermiche, S.; Keuker, C.; Kiesling, C.; Klein, M.; Kleinwort, C.; Knies, G.; Ko, W.; Kobler, T.; Koch, J.; Köhler, T.; Köhne, J.; Kolander, M.; Kolanoski, H.; Kole, F.; Koll, J.; Kolya, S. D.; Koppitz, B.; Korbel, V.; Korn, M.; Kostka, P.; Kotelnikov, S. K.; Krasny, M. W.; Krehbiel, H.; Krivan, F.; Krücker, D.; Krüger, U.; Krüner-Marquis, U.; Kubantsev, M.; Kubenka, J. P.; Külper, T.; Küsel, H.-J.; Küster, H.; Kuhlen, M.; Kurča, T.; Kurzhöfer, J.; Kuznik, B.; Laforge, B.; Lamarche, F.; Lander, R.; Landon, M. P. J.; Lange, W.; Lange, W.; Langkau, R.; Lanius, P.; Laporte, J.-F.; Laptin, L.; Laskus, H.; Lebedev, A.; Lemler, M.; Lenhardt, U.; Leuschner, A.; Leverenz, C.; Levonian, S.; Lewin, D.; Ley, Ch.; Lindner, A.; Lindström, G.; Linsel, F.; Lipinski, J.; Liss, B.; Loch, P.; Lodge, A. B.; Lohmander, H.; Lopez, G. C.; Lottin, J.-P.; Lubimov, V.; Ludwig, K.; Lüers, D.; Lugetski, N.; Lundberg, B.; Maeshima, K.; Magnussen, N.; Malinovski, E.; Mani, S.; Marage, P.; Marks, J.; Marshall, R.; Martens, J.; Martin, F.; Martin, G.; Martin, R.; Martyn, H.-U.; Martyniak, J.; Masbender, V.; Masson, S.; Mavroidis, A.; Maxfield, S. J.; McMahon, S. J.; Mehta, A.; Meier, K.; Meissner, J.; Mercer, D.; Merz, T.; Meyer, C. A.; Meyer, H.; Meyer, J.; Mikocki, S.; Mills, J. L.; Milone, V.; Möck, J.; Monnier, E.; Montés, B.; Moreau, F.; Moreels, J.; Morgan, B.; Morris, J. V.; Morton, J. M.; Müller, K.; Murín, P.; Murray, S. A.; Nagovizin, V.; Naroska, B.; Naumann, Th.; Nayman, P.; Nepeipivo, A.; Newman, P.; Newman-Coburn, D.; Newton, D.; Neyret, D.; Nguyen, H. K.; Niebergall, F.; Niebuhr, C.; Nisius, R.; Novák, T.; Nováková, H.; Nowak, G.; Noyes, G. W.; Nyberg, M.; Oberlack, H.; Obrock, U.; Olsson, J. E.; Olszowska, J.; Orenstein, S.; Ould-Saada, F.; Pailler, P.; Palanque, S.; Panaro, E.; Panitch, A.; Parey, J.-Y.; Pascaud, C.; Patel, G. D.; Patoux, A.; Paulot, C.; Pein, U.; Peppel, E.; Perez, E.; Perrodo, P.; Perus, A.; Peters, S.; Pharabod, J.-P.; Phillips, H. T.; Phillips, J. P.; Pichler, Ch.; Pieuchot, A.; Pimpl, W.; Pitzl, D.; Porrovecchio, A.; Prell, S.; Prosi, R.; Quehl, H.; Rädel, G.; Raupach, F.; Rauschnabel, K.; Reboux, A.; Reimer, P.; Reinmuth, G.; Reinshagen, S.; Ribarics, P.; Riech, V.; Riedlberger, J.; Riege, H.; Riess, S.; Rietz, M.; Robertson, S. M.; Robmann, P.; Röpnack, P.; Roosen, R.; Rosenbauer, K.; Rostovtsev, A.; Royon, C.; Rudge, A.; Rüter, K.; Rudowicz, M.; Ruffer, M.; Rusakov, S.; Rusinov, V.; Rybicki, K.; Sacton, J.; Sahlmann, N.; Sanchez, E.; Sankey, D. P. C.; Savitski, M.; Schacht, P.; Schiek, S.; Schirm, N.; Schleif, S.; Schleper, P.; von Schlippe, W.; Schmidt, C.; Schmidt, D.; Schmidt, G.; Schmitz, W.; Schmücker, H.; Schröder, V.; Schütt, J.; Schuhmann, E.; Schulz, M.; Schwind, A.; Scobel, W.; Seehausen, U.; Sefkow, F.; Sell, R.; Seman, M.; Semenov, A.; Shatalov, P.; Shekelyan, V.; Sheviakov, I.; Shooshtari, H.; Shtarkov, L. N.; Siegmon, G.; Siewert, U.; Sirois, Y.; Sirous, A.; Skillicorn, I. O.; Škvařil, P.; Smirnov, P.; Smith, J. R.; Smolik, L.; Sole, D.; Soloviev, Y.; Špalek, J.; Spitzer, H.; von Staa, R.; Staeck, J.; Staroba, P.; Šťastný, J.; Steenbock, M.; Štefan, P.; Steffen, P.; Steinberg, R.; Steiner, H.; Stella, B.; Stephens, K.; Stier, J.; Stiewe, J.; Stösslein, U.; Strachota, J.; Straumann, U.; Strowbridge, A.; Struczinski, W.; Sutton, J. P.; Szkutnik, Z.; Tappern, G.; Tapprogge, S.; Taylor, R. E.; Tchernyshov, V.; Tchudakov, V.; Thiebaux, C.; Thiele, K.; Thompson, G.; Thompson, R. J.; Tichomirov, I.; Trenkel, C.; Tribanek, W.; Tröger, K.; Truöl, P.; Turiot, M.; Turnau, J.; Tutas, J.; Urban, L.; Urban, M.; Usik, A.; Valkár, Š.; Valkárová, A.; Vallée, C.; Van Beek, G.; Vanderkelen, M.; Van Lancker, L.; Van Mechelen, P.; Vartapetian, A.; Vazdik, Y.; Vecko, M.; Verrecchia, P.; Vick, R.; Villet, G.; Vogel, E.; Wacker, K.; Wagener, M.; Walker, I. W.; Walther, A.; Weber, G.; Wegener, D.; Wegner, A.; Weissbach, P.; Wellisch, H. P.; West, L.; White, D.; Willard, S.; Winde, M.; Winter, G.-G.; Wolff, Th.; Womersley, L. A.; Wright, A. E.; Wünsch, E.; Wulff, N.; Wyborn, B. E.; Yiou, T. P.; Žáček, J.; Zarbock, D.; Závada, P.; Zeitnitz, C.; Zhang, Z.; Ziaeepour, H.; Zimmer, M.; Zimmermann, W.; Zomer, F.; Zuber, K.; H1 Collaboration

1997-02-01

Technical aspects of the three major components of the H1 detector at the electron-proton storage ring HERA are described. This paper covers the detector status up to the end of 1994 when a major upgrading of some of its elements was undertaken. A description of the other elements of the detector and some performance figures from luminosity runs at HERA during 1993 and 1994 are given in a paper previously published in this journal.

Technical efficiency and productivity of Chinese county hospitals: an exploratory study in Henan province, China.

PubMed

Cheng, Zhaohui; Tao, Hongbing; Cai, Miao; Lin, Haifeng; Lin, Xiaojun; Shu, Qin; Zhang, Ru-Ning

2015-09-09

Chinese county hospitals have been excessively enlarging their scale during the healthcare reform since 2009. The purpose of this paper is to examine the technical efficiency and productivity of county hospitals during the reform process, and to determine whether, and how, efficiency is affected by various factors. 114 sample county hospitals were selected from Henan province, China, from 2010 to 2012. Data envelopment analysis was employed to estimate the technical and scale efficiency of sample hospitals. The Malmquist index was used to calculate productivity changes over time. Tobit regression was used to regress against 4 environmental factors and 5 institutional factors that affected the technical efficiency. (1) 112 (98.2%), 112 (98.2%) and 104 (91.2%) of the 114 sample hospitals ran inefficiently in 2010, 2011 and 2012, with average technical efficiency of 0.697, 0.748 and 0.790, respectively. (2) On average, during 2010-2012, productivity of sample county hospitals increased by 7.8%, which was produced by the progress in technical efficiency changes and technological changes of 0.9% and 6.8%, respectively. (3) Tobit regression analysis indicated that government subsidy, hospital size with above 618 beds and average length of stay assumed a negative sign with technical efficiency; bed occupancy rate, ratio of beds to nurses and ratio of nurses to physicians assumed a positive sign with technical efficiency. There was considerable space for technical efficiency improvement in Henan county hospitals. During 2010-2012, sample hospitals experienced productivity progress; however, the adverse change in pure technical efficiency should be emphasised. Moreover, according to the Tobit results, policy interventions that strictly supervise hospital bed scale, shorten the average length of stay and coordinate the proportion among physicians, nurses and beds, would benefit hospital efficiency. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Digital Distribution of Advertising for Publications (DDAP): a graphic arts prototype of electronic intermedia publishing (EIP)

NASA Astrophysics Data System (ADS)

Dunn, Patrice M.

1998-01-01

The Digital Distribution of Advertising for Publications (DDAP) is a graphic arts industry prototype of Electronic Intermedia Publishing (EIP). EIP is a strategic, multi- industrial concept that seeks to enable the capture and input of volumes of data (i.e., both raster and object oriented data -- as well as the latter's antecedent which is vector data -- color data and black-and-white data) from a multiplicity of devices; then flowing, controlling, manipulating, modifying, storing, retrieving, transmitting, and shipping, that data through an industrial process for output to a multiplicity of output devices (e.g., ink on paper, toner on paper, bits and bytes on CD ROM, Internet, Multimedia, HDTV, etc.). As the technical requirements of the print medium are among the most rigorous in the Intermedia milieu the DDAP prototype addresses some of the most challenging issues faced in Electronic Intermedia Publishing (EIP).

Science and Technology Directorate Publications and Presentations, January 1-December 31, 2005

NASA Technical Reports Server (NTRS)

Summers, F. G. (Compiler)

2006-01-01

This Technical Memorandum (TM) lists the significant publications and presentations of the Science and Technology Directorate during the period January 1-December 31, 2005. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publication in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature. Questions or requests for additional information about the entries in this report should be directed to Dr. J.F. Spann, Jr. (VP60; 961-7512) or to one of the authors.

Science and Technology Directorate Publications and Presentations, January 1-December 31, 2004

NASA Technical Reports Server (NTRS)

Summers, F. G. (Compiler)

2005-01-01

This Technical Memorandum (TM) lists the significant publications and presentations of the Science and Technology Directorate during the period January 1-December 31, 2004. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publication in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature. Questions or requests for additional information about the entries in this report should be directed to Dr. A.F. Whitaker (SD01; 544 2481) or to one of the authors.

Twenty-year trends of authorship and sampling in applied biomechanics research.

PubMed

Knudson, Duane

2012-02-01

This study documented the trends in authorship and sampling in applied biomechanics research published in the Journal of Applied Biomechanics and ISBS Proceedings. Original research articles of the 1989, 1994, 1999, 2004, and 2009 volumes of these serials were reviewed, excluding reviews, modeling papers, technical notes, and editorials. Compared to 1989 volumes, the mean number of authors per paper significantly increased (35 and 100%, respectively) in the 2009 volumes, along with increased rates of hyperauthorship, and a decline in rates of single authorship. Sample sizes varied widely across papers and did not appear to change since 1989.

Production and distribution of scientific and technical databases - Comparison among Japan, US and Europe

NASA Astrophysics Data System (ADS)

Onodera, Natsuo; Mizukami, Masayuki

This paper estimates several quantitative indice on production and distribution of scientific and technical databases based on various recent publications and attempts to compare the indice internationally. Raw data used for the estimation are brought mainly from the Database Directory (published by MITI) for database production and from some domestic and foreign study reports for database revenues. The ratio of the indice among Japan, US and Europe for usage of database is similar to those for general scientific and technical activities such as population and R&D expenditures. But Japanese contributions to production, revenue and over-countory distribution of databases are still lower than US and European countries. International comparison of relative database activities between public and private sectors is also discussed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kopta, J.A.; Springer, C.J.

This report is a bibliography of scientific and technical 1986 publications of Argonne National Laboratory. Some are ANL contributions to outside organizations' reports published in 1986. This compilation, prepared by the Technical Information Services Technical Publications Section (TPS), lists all nonrestricted 1986 publications submitted to TPS by the Laboratory's Divisions. Author indexes list ANL authors only. If a first author is not an ANL employee, an asterisk in the bibliographic citation indicates the first ANL author. The report is divided into seven parts: Journal Articles -- Listed by first author; ANL Reports -- Listed by report number; ANL and non-ANLmore » Unnumbered Reports -- Listed by report number; Non-ANL Numbered Reports -- Listed by report number; Books and Book Chapters -- Listed by first author; Conference Papers -- Listed by first author; and Complete Author Index.« less

[Analysis of articles published in Chinese Journal of Burns winning high citation rate during 2000-2009].

PubMed

Mo, Yu; Luo, Qin; Wang, Xu; Xie, Qiu-hong

2010-06-01

To analyze the inherent quality of articles published in our journal enjoying high citation rate, and to explore strategies on improving impact of papers. Scientific papers published in Chinese Journal of Burns from February 2000 to December 2009, with citation rate equal to or higher than 20 times were collected for classification according to their publication year, publication form, subject distribution, regional and institutional distribution, frequency of authors appeared in those published papers, frequency of winning prizes, and sources of fund (national, ministerial, or provincial). Data were processed by Microsoft Excel software. Altogether 64 scientific papers with high citation rate were published from 2000 to 2006. Original articles and expert forum accounted for 55 (86.0%). Twenty-one articles of clinical study were cited frequently, among them one was cited for 79 times. Articles dealing with subjects with popular interest or cutting-edge problems were cited frequently. Most articles winning high citation rate were originated from institutions located in Chongqing, Beijing, Shanghai, and Xi'an, etc. Those scientific papers which were instructed by specialists, with high level foundation and won prizes were cited with high frequency. The top 20 articles were mainly cited by excellent doctoral dissertations and master theses originated from 11 institutions for higher education, and source journals of Chinese Scientific and Technical Papers and Citations Database. Authors should emphasize subject planning in order to compose papers with high quality. The editorial board should make arrangements with influential specialists with related skills for their contributions based on subjects of popular interest concerning the cutting-edge problems of the specific specialty, and pay close attention to papers on clinical study and those with funding from high levels, to improve impact of the articles.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Addis, G.

The EPRI Workshop on Substitute Insulation for PCB was held to assemble current data on technical and toxicological needs for the substitute products, the properties of the candidate materials, and research in the area. Twenty papers (of which 17 are published here) were presented in the three half day sessions. Because of the unpredictable influence of future adverse happenings on public opinion, no unambiguous product recommendations could be made.

Cutting-and-Creasing Pressman (paper goods) 649.782--Technical Report on Development of USTES Aptitude Test Battery.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

Archive report for most USGS seismic refraction investigations conducted between 1978 and 1991

USGS Publications Warehouse

Murphy, Janice M.

2000-01-01

In 1978, the U.S. Geological Survey (USGS) began acquiring seismic refraction data throughout the U.S. and Saudi Arabia. Numerous professional papers have been published in the literature and the technical details and goals for most of these surveys have been described in USGS Open-file reports (Table 1). This report describes the archiving of the data.

Planning Library Services; Proceedings of a Research Seminar (University of Lancaster 9-11 July 1969).

ERIC Educational Resources Information Center

Mackenzie, A. Graham, Ed.; Stuart, Ian M., Ed.

This proceedings volume of a seminar on planning library services is the third in a series of papers, published at irregular intervals, to report on research work by members of the University of Lancaster library staff. From January 1967 until June 1969 the Office of Scientific and Technical Information (OSTI) organized regular meetings under the…

Clinical and technical considerations in the analysis of gingival crevicular fluid.

PubMed

Wassall, Rebecca R; Preshaw, Philip M

2016-02-01

Despite the technical challenges involved when collecting, processing and analyzing gingival crevicular fluid samples, research using gingival crevicular fluid has, and will continue to play, a fundamental role in expanding our understanding of periodontal pathogenesis and healing outcomes following treatment. A review of the literature, however, clearly demonstrates that there is considerable variation in the methods used for collection, processing and analysis of gingival crevicular fluid samples by different research groups around the world. Inconsistent or inadequate reporting impairs interpretation of results, prevents accurate comparison of data between studies and potentially limits the conclusions that can be made from a larger body of evidence. The precise methods used for collection and analysis of gingival crevicular fluid (including calibration studies required before definitive clinical studies) should be reported in detail, either in the methods section of published papers or as an online supplementary file, so that other researchers may reproduce the methodology. Only with clear and transparent reporting will the full impact of future gingival crevicular fluid research be realized. This paper discusses the complexities of gingival crevicular fluid collection and analysis and provides guidance to researchers working in this field. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Special feature on imaging systems and techniques

NASA Astrophysics Data System (ADS)

Yang, Wuqiang; Giakos, George

2013-07-01

The IEEE International Conference on Imaging Systems and Techniques (IST'2012) was held in Manchester, UK, on 16-17 July 2012. The participants came from 26 countries or regions: Austria, Brazil, Canada, China, Denmark, France, Germany, Greece, India, Iran, Iraq, Italy, Japan, Korea, Latvia, Malaysia, Norway, Poland, Portugal, Sweden, Switzerland, Taiwan, Tunisia, UAE, UK and USA. The technical program of the conference consisted of a series of scientific and technical sessions, exploring physical principles, engineering and applications of new imaging systems and techniques, as reflected by the diversity of the submitted papers. Following a rigorous review process, a total of 123 papers were accepted, and they were organized into 30 oral presentation sessions and a poster session. In addition, six invited keynotes were arranged. The conference not only provided the participants with a unique opportunity to exchange ideas and disseminate research outcomes but also paved a way to establish global collaboration. Following the IST'2012, a total of 55 papers, which were technically extended substantially from their versions in the conference proceeding, were submitted as regular papers to this special feature of Measurement Science and Technology . Following a rigorous reviewing process, 25 papers have been finally accepted for publication in this special feature and they are organized into three categories: (1) industrial tomography, (2) imaging systems and techniques and (3) image processing. These papers not only present the latest developments in the field of imaging systems and techniques but also offer potential solutions to existing problems. We hope that this special feature provides a good reference for researchers who are active in the field and will serve as a catalyst to trigger further research. It has been our great pleasure to be the guest editors of this special feature. We would like to thank the authors for their contributions, without which it would not be possible to have this special feature published. We are grateful to all reviewers, who devoted their time and effort, on a voluntary basis, to ensure that all submissions were reviewed rigorously and fairly. The publishing staff of Measurement Science and Technology are particularly acknowledged for giving us timely advice on guest-editing this special feature.

Technical interventions to increase adenoma detection rate in colonoscopy.

PubMed

Rondonotti, Emanuele; Andrealli, Alida; Amato, Arnaldo; Paggi, Silvia; Conti, Clara Benedetta; Spinzi, Giancarlo; Radaelli, Franco

2016-12-01

Adenoma detection rate (ADR) is the most robust colonoscopy quality metric and clinical studies have adopted it as the ideal method to assess the impact of technical interventions. Areas covered: We reviewed papers focusing on the impact of colonoscopy technical issues on ADR, including withdrawal time and technique, second evaluation of the right colon, patient positional changes, gastrointestinal assistant participation during colonoscopy, water-aided technique, optimization of bowel preparation and antispasmodic administration. Expert commentary: Overall, technical interventions are inexpensive, available worldwide and easy to implement. Some of them, such as the adoption of split dose regimen and slow scope withdrawal to allow a careful inspection, have been demonstrated to significantly improve ADR. Emerging data support the use of water-exchange colonoscopy. According to published studies, other technical interventions seem to provide only marginal benefit to ADR. Unfortunately, the available evidence has methodological limitations, such as small sample sizes, the inclusion of expert endoscopists only and the evaluation of single technical interventions. Additionally, larger studies are needed to clarify whether these interventions might have a higher benefit on low adenoma detectors and whether the implementation of a bundle of them, instead of a single technical maneuver, might have a greater impact on ADR.

Scaffold Translation: Barriers Between Concept and Clinic

PubMed Central

Murphy, William L.

2011-01-01

Translation of scaffold-based bone tissue engineering (BTE) therapies to clinical use remains, bluntly, a failure. This dearth of translated tissue engineering therapies (including scaffolds) remains despite 25 years of research, research funding totaling hundreds of millions of dollars, over 12,000 papers on BTE and over 2000 papers on BTE scaffolds alone in the past 10 years (PubMed search). Enabling scaffold translation requires first an understanding of the challenges, and second, addressing the complete range of these challenges. There are the obvious technical challenges of designing, manufacturing, and functionalizing scaffolds to fill the Form, Fixation, Function, and Formation needs of bone defect repair. However, these technical solutions should be targeted to specific clinical indications (e.g., mandibular defects, spine fusion, long bone defects, etc.). Further, technical solutions should also address business challenges, including the need to obtain regulatory approval, meet specific market needs, and obtain private investment to develop products, again for specific clinical indications. Finally, these business and technical challenges present a much different model than the typical research paradigm, presenting the field with philosophical challenges in terms of publishing and funding priorities that should be addressed as well. In this article, we review in detail the technical, business, and philosophical barriers of translating scaffolds from Concept to Clinic. We argue that envisioning and engineering scaffolds as modular systems with a sliding scale of complexity offers the best path to addressing these translational challenges. PMID:21902613

Standardization of quantum technologies and QKD activities within ETSI (Conference Presentation)

NASA Astrophysics Data System (ADS)

Lenhart, Gaby

2016-04-01

In order to establish new ICT technologies successfully on the market it is essential to build trust within any potential users. This is especially true for technologies which are based upon paradigms that are not yet familiar to these users, such as quantum technologies. Technical standards are an excellent means to offer a certain degree of legal reliability and technical interoperability that is required by industry for commercial take up. While such standards on the one hand must be clear enough to provide strict rules for implementers, on the other hand they also must remain flexible enough to not restrict progress in further research and development on the standardized technology. Hence such standards have to be produced by a wide variety of stakeholders taking into account all their different needs. The paper will provide some insight into the general mechanisms of standardization and their relation to quantum technologies. Alongside with the relevance of standardization as an enabler for certification of quantum based technologies it will explain its potential for securing intellectual property. In its first part paper will concentrate on the advantages of standardization and discuss fears some of the stakeholders share, in detail. The second part will focus on the technical work going on in ETSI in relation to quantum technologies. In 2008 ETSI created a standards work group on Quantum Key Distribution, the ETSI ISG QKD and more recently a group on Quantum-Safe Cryptography, the ETSI ISG QSC. A significant part of the technical work of these groups has already been published and will be introduced in the following. However a big share of work is still ongoing and lot more is planned for the future, as are continuous revisions and updates of the published specifications. This standardization work covers several levels: It starts of by problem statements in the form of use cases, from which technical requirements can be derived. These requirements then form the base upon which a reference architecture is created. Various different specifications describe in detail components, protocols and interfaces. An ontology is developed in order to guarantee common understanding of the technical terms used in standardization for quantum technologies. Special emphasis is provided to security proofs.

From Paper to Electron

PubMed Central

Anderson, Kent R.

2000-01-01

The Internet represents a different type of technology for publishers of scientific, technical, and medical journals. It is not a technology that sustains current markets and creates new efficiencies but is, rather, a disruptive technology that could radically alter market forces, profit expectations, and business models. This paper is a translation and amplification of the research done in this area, applied to a large-circulation new science journal, Pediatrics. The findings suggest that the journal of the future will be electronic, have a less volatile cost structure, be supported more by services than by content, be less able to rely on subscription revenues, and abandon certain elements of current value networks. It also provides a possible framework for other publishers to use to evaluate their own journals relative to this disruptive technology. PMID:10833160

Solar Cycle Dynamics of Solar, Magnetospheric, and Heliospheric Particles, and Long-Term Atmospheric Coupling: SAMPEX

NASA Technical Reports Server (NTRS)

Mason, G. M.; Blake, J. B.; Mazur, J. E.; Mewaldt, R. A.; Stone, E. C.; Baker, D. N.; vonRosenvinge, T. T.; Callis, L. B.; Klecker, B.; Hovestadt, D.;

Summary of Research 1998, Department of Aeronautics and Astronautics

DTIC Science & Technology

1999-08-01

included which consists of conference presentations and publications, books, contributions to books, published journal papers, technical reports, and...Using Smart Materials," Journal of Smart Materials and Structures, Vol. 7, pp. 95-104, 1998. Agrawal, B. and Treanor, K., "Shape Control of a Beam Using...Piezoelectric Actuators," Journal of Smart Materials and Structures, accepted. THESES DIRECTED: Johnson, S. and Vlattas, J., "Active Vibration

Planning Library Services; Proceedings of a Research Seminar Held at the University of Lancaster 9-11 July 1969.

ERIC Educational Resources Information Center

Mackenzie, A. Graham, Ed.; Stuart, Ian M., Ed.

This proceedings volume of a seminar on planning library services is the third in a series of papers, published at irregular intervals, to report on research work by members of the University of Lancaster library staff. From January 1967 until June 1969 the Office of Scientific and Technical Information (OSTI) organized regular meetings under the…

Six Decades of Flight Research: An Annotated Bibliography of Technical Publications of NASA Dryden Flight Research Center, 1946-2006

NASA Technical Reports Server (NTRS)

Fisher, David F.

2007-01-01

Titles, authors, report numbers, and abstracts are given for nearly 2900 unclassified and unrestricted technical reports and papers published from September 1946 to December 2006 by the NASA Dryden Flight Research Center and its predecessor organizations. These technical reports and papers describe and give the results of 60 years of flight research performed by the NACA and NASA, from the X-1 and other early X-airplanes, to the X-15, Space Shuttle, X-29 Forward Swept Wing, X-31, and X-43 aircraft. Some of the other research airplanes tested were the D-558, phase 1 and 2; M-2, HL-10 and X-24 lifting bodies; Digital Fly-By-Wire and Supercritical Wing F-8; XB-70; YF-12; AFTI F-111 TACT and MAW; F-15 HiDEC; F-18 High Alpha Research Vehicle, F-18 Systems Research Aircraft and the NASA Landing Systems Research aircraft. The citations of reports and papers are listed in chronological order, with author and aircraft indices. In addition, in the appendices, citations of 270 contractor reports, more than 200 UCLA Flight System Research Center reports, nearly 200 Tech Briefs, 30 Dryden Historical Publications, and over 30 videotapes are included.

A Critical Appraisal of RAFT-Mediated Polymerization-Induced Self-Assembly

PubMed Central

2016-01-01

Recently, polymerization-induced self-assembly (PISA) has become widely recognized as a robust and efficient route to produce block copolymer nanoparticles of controlled size, morphology, and surface chemistry. Several reviews of this field have been published since 2012, but a substantial number of new papers have been published in the last three years. In this Perspective, we provide a critical appraisal of the various advantages offered by this approach, while also pointing out some of its current drawbacks. Promising future research directions as well as remaining technical challenges and unresolved problems are briefly highlighted. PMID:27019522

An application review of dielectric electroactive polymer actuators in acoustics and vibration control

NASA Astrophysics Data System (ADS)

Zhao, Zhenghong; Shuai, Changgeng; Gao, Yan; Rustighi, Emiliano; Xuan, Yuan

2016-09-01

Recent years have seen an increasing interest in the dielectric electroactive polymers (DEAPs) and their potential in actuator applications due to the large strain capabilities. This paper starts with an overview of some configurations of the DEAP actuators and follows with an in-depth literature and technical review of recent advances in the field with special considerations given to aspects pertaining to acoustics and vibration control. Significant research has shown that these smart actuators are promising replacement for many conventional actuators. The paper has been written with reference to a large number of published papers listed in the reference section.

EDITORIAL: Selected papers from the 11th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2011) Selected papers from the 11th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2011)

NASA Astrophysics Data System (ADS)

Cho, Young-Ho

2012-09-01

This special section of Journal of Micromechanics and Microengineering features papers selected from the 11th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2011), held at Sejong Hotel in Seoul, Korea during 15-18 November 2011. Since the first PowerMEMS workshop held in Sendai, Japan in 2000, the workshop has developed as the premier forum for reporting research results in micro and nanotechnology for power generation, energy conversion, harvesting and processing applications, including in-depth technical issues on nanostructures and materials for small-scale high-density energy and thermal management. Potential PowerMEMS applications cover not only portable power devices for consumer electronics and remote sensors, but also micro engines, impulsive thrusters and fuel cells for systems ranging from the nanometer to the millimeter scale. The 2011 technical program consists of 1 plenary talk, 4 invited talks and 118 contributed presentations. The 48 oral and 70 poster presentations, selected by 27 Technical Program Committee Members from 131 submitted abstracts, have stimulated lively discussion maximizing the interaction between participants. Among them, this special section includes 9 papers covering micro-scale power generators, energy converters, harvesters, thrusters and thermal coolers. Finally, we are grateful to the members of the International Steering Committee, the Technical Program Committee, and the Local Organizing Committee for their efforts and contributions to PowerMEMS 2011. We also thank the two companies Samsung Electro-Mechanics and LG Elite for technical tour arrangements. Special thanks go to Dr Ian Forbes, the editorial staff of the Journal of Micromechanics and Microengineering, as well as to the staff of IOP Publishing for making this special section possible.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.

Preface The Twelfth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 20-22, 1987. The year ending December 1986 was very difficult for the domestic geothermal industry. Low oil prices caused a sharp drop in geothermal steam prices. We expected to see some effect upon attendance at the Twelfth Workshop. To our surprise, the attendance was up by thirteen from previous years, with one hundred and fifty-seven registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, Japan, Mexico, New Zealand, and Turkey. Despite a worldwide surplus of oil, international geothermal interest and development is growingmore » at a remarkable pace. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Seven technical papers not presented at the Workshop are also published; they concern geothermal developments and research in Iceland, Italy, and New Zealand. In addition to these forty-eight technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was John R. Berg from the Department of Energy. We thank him for sharing with the Workshop participants his thoughts on the expectations of this agency in the role of alternative energy resources, specifically geothermal, within the country???s energy framework. His talk is represented as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: M. Gulati, K. Goyal, G.S. Bodvarsson, A.S. Batchelor, H. Dykstra, M.J. Reed, A. Truesdell, J.S. Gudmundsson, and J.R. Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank Jean Cook, Marilyn King, Amy Osugi, Terri Ramey, and Rosalee Benelli for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment, specially Jim Lovekin. The Twelfth Workshop was supported by the Geothermal Technology Division of the U. S. Department of Energy through Contract Nos. DE-AS03-80SF11459 and DE-AS07- 84ID12529. We deeply appreciate this continued support. January 1987 Henry J. Ramey, Jr. Paul Kruger Roland N. Horne William E. Brigham Frank G. Miller Jesus Rivera« less

Thirteenth workshop on geothermal reservoir engineering: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.

1988-01-21

PREFACE The Thirteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 19-21, 1988. Although 1987 continued to be difficult for the domestic geothermal industry, world-wide activities continued to expand. Two invited presentations on mature geothermal systems were a keynote of the meeting. Malcolm Grant presented a detailed review of Wairakei, New Zealand and highlighted plans for new development. G. Neri summarized experience on flow rate decline and well test analysis in Larderello, Italy. Attendance continued to be high with 128 registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, New Zealand, Japan, Mexico andmore » The Philippines. A discussion of future workshops produced a strong recommendation that the Stanford Workshop program continue for the future. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Four technical papers not presented at the Workshop are also published. In addition to these forty five technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was Gustavo Calderon from the Inter-American Development Bank. We thank him for sharing with the Workshop participants a description of the Bank???s operations in Costa Rica developing alternative energy resources, specifically Geothermal, to improve the country???s economic basis. His talk appears as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: J. Combs, G. T. Cole, J. Counsil, A. Drenick, H. Dykstra, K. Goyal, P. Muffler, K. Pruess, and S. K. Sanyal. The Workshop was organized by the Stanford Geothermal Program faculty, staff and students. We would like to thank Marilyn King, Pat Oto, Terri Ramey, Bronwyn Jones, Yasmin Gulamani, and Rosalee Benelli for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment, especially Jeralyn Luetkehans. The Thirteenth Workshop was supported by the Geothermal Technology Division of the U.S. Department of Energy through Contract No. DE-AS07-84ID12529. We deeply appreciate this continued support. Henry J. Ramey, Jr. Paul Kruger Roland N. Horne William E. Brigham Frank G. Miller Jean W. Cook« less

Usage of insecure E-mail services among researchers with different scientific background.

PubMed

Solić, Kresimir; Grgić, Krešimir; Ilakovac, Vesna; Zagar, Drago

2011-08-01

Free web‑based e-mail services are considered to have more security flaws than institutional ones, but they are frequently used among scientific researchers for professional communication. The aim of this study was to analyze frequency of usage of the insecure free e-mail services for professional communication among biomedical, economical and technical researchers, who published papers in one of three different journals: Croatian Medical Journal, Automatika and Economic Research. Contact details of the authors who provided their e‑mail address from the papers published in those three journals during one year period were collected. These e‑mail addresses were collected from the electronic archive of the journals in question. The domains of all e‑mail addresses were assessed and contacts were categorized into three groups according to the following types: world-wide known free web‑based e‑mail services, national Internet Service Provider (ISP) e-mail services, and institutional or corporate e-mail addresses. The proportion of authors using free web-based e-mail services, the least secure group type, was highest among biomedical researchers (17.8%) while every e‑mail address collected from the technical journal belonged to the secured institutional e‑mail group type. It seems that all researchers from the technical scientific field and most of the researchers from the economical field value good security practice and use more secure systems for professional communication. High percentage of the biomedical researchers who use insecure e‑mail services may mean that they need to be warned of the possible security disadvantages of those kinds of e‑mail addresses.

Scale and scope economies in Mexican private medical units.

PubMed

Keith, Jorge; Prior, Diego

2014-01-01

To evaluate technical efficiency and potential presence of scale and scope economies in Mexican private medical units (PMU) that will improve management decisions. We used data envelopment analysis methods with inputs and outputs for 2 105 Mexican PMU published in 2010 by the Instituto Nacional de Estadística y Geografía from the "Estadística de Unidades Médicas Privadas con Servicio de Hospitalización (PEC-6-20-A)" questionnaire. The application of the models used in the paper found that there is a marginal presence of economies of scale and scope in Mexican PMU. PMU in Mexico must focus to deliver their services on a diversified structure to achieve technical efficiency.

Scaffold translation: barriers between concept and clinic.

PubMed

Hollister, Scott J; Murphy, William L

2011-12-01

Translation of scaffold-based bone tissue engineering (BTE) therapies to clinical use remains, bluntly, a failure. This dearth of translated tissue engineering therapies (including scaffolds) remains despite 25 years of research, research funding totaling hundreds of millions of dollars, over 12,000 papers on BTE and over 2000 papers on BTE scaffolds alone in the past 10 years (PubMed search). Enabling scaffold translation requires first an understanding of the challenges, and second, addressing the complete range of these challenges. There are the obvious technical challenges of designing, manufacturing, and functionalizing scaffolds to fill the Form, Fixation, Function, and Formation needs of bone defect repair. However, these technical solutions should be targeted to specific clinical indications (e.g., mandibular defects, spine fusion, long bone defects, etc.). Further, technical solutions should also address business challenges, including the need to obtain regulatory approval, meet specific market needs, and obtain private investment to develop products, again for specific clinical indications. Finally, these business and technical challenges present a much different model than the typical research paradigm, presenting the field with philosophical challenges in terms of publishing and funding priorities that should be addressed as well. In this article, we review in detail the technical, business, and philosophical barriers of translating scaffolds from Concept to Clinic. We argue that envisioning and engineering scaffolds as modular systems with a sliding scale of complexity offers the best path to addressing these translational challenges. © Mary Ann Liebert, Inc.

ALL RUSSIAN INSTITUTE FOR SCIENTIFIC AND TECHNICAL INFORMATION (VINITI) OF THE RUSSIAN ACADEMY OF SCIENCES

PubMed Central

Markusova, Valentina

2012-01-01

The aim of the paper is to overview the leading information processing domain in Russia and Eastern Europe, namely All Russian Institute for Scientific and Technical Information (VINITI ) of the Russian Academy of Sciences. Russian science structure is different from that in the Western Europe and the US. The main aim of VINITI is to collect, process and disseminate scientific information on various fields of science and technology, published in 70 countries in 40 languages, selected from books, journals, conference proceedings, and patents. A special attention is given to the journal selection and depositing manuscripts (a kind of grey literature), an important source for Russian research. VINITI has created the largest database containing about 30 million records dating back to 1980. About 80,000-100,000 new records are added monthly. VINITI publishes the Journal Abstract (JA) on 19 fields of science, including medicine, containing about a million publications annually. Two thirds of these records are foreign and 36.7% – Russian sources. PMID:23322964

All Russian institute for scientific and technical information (viniti) of the Russian academy of sciences.

PubMed

Markusova, Valentina

2012-06-01

The aim of the paper is to overview the leading information processing domain in Russia and Eastern Europe, namely All Russian Institute for Scientific and Technical Information (VINITI ) of the Russian Academy of Sciences. Russian science structure is different from that in the Western Europe and the US. The main aim of VINITI is to collect, process and disseminate scientific information on various fields of science and technology, published in 70 countries in 40 languages, selected from books, journals, conference proceedings, and patents. A special attention is given to the journal selection and depositing manuscripts (a kind of grey literature), an important source for Russian research. VINITI has created the largest database containing about 30 million records dating back to 1980. About 80,000-100,000 new records are added monthly. VINITI publishes the Journal Abstract (JA) on 19 fields of science, including medicine, containing about a million publications annually. Two thirds of these records are foreign and 36.7% - Russian sources.

Feasible Application Area Study for Linear Laser Cutting in Paper Making Processes

NASA Astrophysics Data System (ADS)

Happonen, A.; Stepanov, A.; Piili, H.

Traditional industry sectors, like paper making industry, tend to stay within well-known technology rather than going forward towards promising, but still quite new technical solutions and applications. This study analyses the feasibility of the laser cutting in large-scale industrial paper making processes. Aim was to reveal development and process related challenges and improvement potential in paper making processes by utilizing laser technology. This study has been carried out, because there still seems to be only few large-scale industrial laser processing applications in paper converting processes worldwide, even in the beginning of 2010's. Because of this, the small-scale use of lasers in paper material manufacturing industry is related to a shortage of well-known and widely available published research articles and published measurement data (e.g. actual achieved cut speeds with high quality cut edges, set-up times and so on). It was concluded that laser cutting has strong potential in industrial applications for paper making industries. This potential includes quality improvements and a competitive advantage for paper machine manufacturers and industry. The innovations have also added potential, when developing new paper products. An example of these kinds of products are ones with printed intelligence, which could be a new business opportunity for the paper industries all around the world.

Space Sciences Laboratory Publications and Presentations

NASA Technical Reports Server (NTRS)

Summers, F. G. (Compiler)

1998-01-01

This document lists the significant publications and presentations of the Space Sciences Laboratory during the period January 1 - December 31, 1997. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Also included for completeness is an Appendix (arranged by page number) listing preprints issued by the Laboratory during this reporting period. Some of the preprints have not been published; those already published are so indicated. Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publication in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature.

Comments by the Chairman

NASA Astrophysics Data System (ADS)

Fouillat, Pascal

2013-08-01

The European Conference on Radiation and its Effects on Components and Systems (RADECS 2012) was held on September 24-28, 2012, in Biarritz, France. The latest advances in the field of radiation effects on electronic and photonic materials, devices, circuits, sensors, and systems, were presented and discussed. The conference featured a Technical Program, an Industrial Exhibit, and one day meeting on radiation ground effects held on September 24 (RADGROUND). The conference gathered 390 attendees, scientists and engineers from 26 countries, with a high participation of France (101), USA (80), Russia (50), Spain (28), Germany (28), and U.K. (25). Raoul Velazco, from TIMA Labs, was in charge of the Technical Program, assisted by a Technical Program Committee listed below and a pool ofmore than 150 reviewers which contributed maintain the high level of quality reached since many years by the RADECS conferences. The total number of contributions reached 201 and each paper received at least four reviews. There were 145 papers accepted and presented in the Oral Sessions (48), Poster Sessions (69), and Data Workshop (28). The scope of the conference encompassed technological processes and design techniques for producing radiation tolerant systems for space, aeronautical or terrestrial applications, as well as relevant methodologies for their characterization and qualification. The Conference Record, gathering all the papers compliant with IEEE quality standards and editorial rules, is available through the IEEE Xplore Digital Library. The paper candidates and selected for publication in the IEEE TRANSACTIONS ON NUCLEAR SCIENCE will be published in this special issue.

Theoretical Synthesis of Mixed Materials for CO2 Capture Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duan, Yuhua

These pages provide an example of the layout and style required for the preparation of four-page papers for the TechConnect World 2015 technical proceedings.Documents must be submitted in electronic (Adobe PDFfile) format. Please study the enclosed materials beforebeginning the final preparation of your paper. Proofread your paper carefully before submitting (it will appear in the published volume in exactly the same form). Your PDF manuscript must be uploaded online by April 11th, 2015.You will receive no proofs. Begin your paper with an abstract of no more than 18 lines. Thoroughly summarize your article in this section since this text willmore » be used for on-line listing and classification of the publication.« less

Technical Evaluation Report on the Fluid Dynamics Panel Symposium on Validation of Computational Fluid Dynamics

DTIC Science & Technology

1989-05-01

separately each of the papers presented and makes general comments on the seven major topic sessions. In addition, a Poster Presentation was reviewed in...Appendix to this report. The Poster Papers, also listed in an Appendix, are published in CP437 Volume I. Le pr6sent rapport fait le point et donne une...ConfErence AGARD CP 437 Volume I dont une liste en est donn6e h I’annexe au pr6sent rapport. Une liste des r6unions d’information/exposition est

Linking and Combining Distributed Operations Facilities using NASA's "GMSEC" Systems Architectures

NASA Technical Reports Server (NTRS)

Smith, Danford; Grubb, Thomas; Esper, Jaime

2008-01-01

NASA's Goddard Mission Services Evolution Center (GMSEC) ground system architecture has been in development since late 2001, has successfully supported eight orbiting satellites and is being applied to many of NASA's future missions. GMSEC can be considered an event-driven service-oriented architecture built around a publish/subscribe message bus middleware. This paper briefly discusses the GMSEC technical approaches which have led to significant cost savings and risk reduction for NASA missions operated at the Goddard Space Flight Center (GSFC). The paper then focuses on the development and operational impacts of extending the architecture across multiple mission operations facilities.

Nutrition research in the military.

PubMed

Hill, Neil E; Fallowfield, J L; Delves, S K; Wilson, D R

2014-06-01

Military research performed in an operational environment involves mission-specific considerations. The Institute of Naval Medicine was tasked in 2008 by the Surgeon General to investigate the nutritional status of deployed British military personnel, and how this might affect body composition, physical fitness and operational capability. This paper briefly describes the logistic and technical issues specific to military research that were encountered by the study team, how these issues were overcome and how this research has influenced military practice. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Science Directorate Publications and Presentations

NASA Technical Reports Server (NTRS)

Summers, F. G. (Compiler)

2000-01-01

This document lists the significant publications and presentation of the Science Directorate during the period January 1-December 31, 1999. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number). Open Literature, and Presentations (arranged alphabetically by title). Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publication in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a section under Open Literature.

Science Directorate Publications and Presentations

NASA Astrophysics Data System (ADS)

Summers, F. G.

2000-07-01

This document lists the significant publications and presentation of the Science Directorate during the period January 1-December 31, 1999. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number). Open Literature, and Presentations (arranged alphabetically by title). Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publication in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a section under Open Literature.

NASA STI Program Seminar: Electronic documents

NASA Technical Reports Server (NTRS)

1994-01-01

The theme of this NASA Scientific and Technical Information Program Seminar was electronic documents. Topics covered included Electronic Documents Management at the CASI, the Impact of Electronic Publishing on User Expectations and Searching Image Record Management, Secondary Publisher Considerations for Electronic Journal Literature, and the Technical Manual Publishing On Demand System (TMPODS).

The preparation of illustrations for reports of the United States Geological survey : with brief descriptions of processes of reproduction

USGS Publications Warehouse

Ridgway, John L.

1920-01-01

There has been an obvious need in the Geological Survey o£ a paper devoted wholly to illustrations. No complete paper on the character, use, and mode of preparation of illustration has been published by the Survey, though brief suggestions concerning certain features of their use have been printed in connection wit other suggestions pertaining to publications. The present paper includes matter which it is hoped will be of service to authors in their work of making up original drafts of illustrations and to drafsmen who are using these originals in preparing more finished drawing but it is not a technical treatise on drafting.

Mariner IV Mission to Mars. Part I

NASA Technical Reports Server (NTRS)

James, Jack N.

1965-01-01

This technical report is a series of individual papers documenting the Mariner-Mars project from its beginning in 1962 following the successful Mariner-Venus mission. Part I is pre-encounter data. It includes papers on the design, development, and testing of Mariner IV, as well as papers detailing methods of maintaining communication with and obtaining data from the spacecraft during flight, and expected results during encounter with Mars. Part 11, post-encounter data, to be published later, will consist of documentation of the events taking place during Mariner IV's encounter with Mars and thereafter. The Mariner-Mars mission, the culmination of an era of spacecraft development, has contributed much new technology to be used in future projects.

Proceedings: 1995 SO{sub 2} control symposium. Volume 1, Sessions 1, 2, 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

Cosponsored by EPRI, DOE, and EPA, this conference provided a forum for the exchange of economic, technical, and regulatory information on sulfur dioxide control technology. From March 28--31, 1995, participants presented 100 technical papers to an audience of 525 people from around the world. Given in thirteen technical sessions, the papers included regulatory and economic issues, wet and dry SO{sub 2} control processes, emerging technologies, and experience with Clean Air Act Amendments (CAAA) Phase I startups. The fifteenth in a series of symposia over the past two decades, the conference included these key points: the domestic flue gas desulfurization (FGD)more » market is likely to be modest over the next ten years, with most activity overseas; FGD awards could reach over $4 billion a year from 1996--2003, with more than half going to Eastern Europe and Asia; worldwide, at the start of 1994, FGD systems were installed on 609 coal-fired power plants; the average capital cost for Phase I retrofits has been $233/kW; and, trends point to simpler designs, such as towers that operate at higher gas velocities with fewer internals. Published proceedings from these regularly scheduled symposia are valuable resources for engineers and utility planners who need up-to-date information to comply with clean air legislation. Selected papers have been processed separately for inclusion in the Energy Science and Technology database.« less

Proceedings: 1995 SO{sub 2} control symposium. Volume 4, Sessions Ba, 8b

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

Cosponsored by EPRI, DOE, and EPA, this conference provided a forum for the exchange of economic, technical, and regulatory information on sulfur dioxide control technology. From March 28--31, 1995, participants presented 100 technical papers to an audience of 525 people from around the world. Given in thirteen technical sessions, the papers included regulatory and economic issues, wet and dry SO{sub 2} control processes, emerging technologies, and experience with Clean Air Act Amendments (CAAA) Phase I startups. The fifteenth in a series of symposia over the past two decades, the conference included these key points: the domestic flue gas desulfurization (FGD)more » market is likely to be modest over the next ten years, with most activity overseas; FGD awards could reach over $4 billion a year from 1996--2003, with more than half going to Eastern Europe and Asia; worldwide, at the start of 1994, FGD systems were installed on 609 coal-fired power plants; the average capital cost for Phase I retrofits has been $233/kW; and, trends point to simpler designs, such as towers that operate at higher gas velocities with fewer internals. Published proceedings from these regularly scheduled symposia are valuable resources for engineers and utility planners who need up-to-date information to comply with clean air legislation. Selected papers have been processed separately for inclusion in the Energy Science and Technology database.« less

US Geological Survey National Computer Technology Meeting; Proceedings, Phoenix, Arizona, November 14-18, 1988

USGS Publications Warehouse

Balthrop, Barbara H.; Terry, J.E.

1991-01-01

The U.S. Geological Survey National Computer Technology Meetings (NCTM) are sponsored by the Water Resources Division and provide a forum for the presentation of technical papers and the sharing of ideas or experiences related to computer technology. This report serves as a proceedings of the meeting held in November, 1988 at the Crescent Hotel in Phoenix, Arizona. The meeting was attended by more than 200 technical and managerial people representing all Divisions of the U.S. Geological Survey.Scientists in every Division of the U.S. Geological Survey rely heavily upon state-of-the-art computer technology (both hardware and sofnuare). Today the goals of each Division are pursued in an environment where high speed computers, distributed communications, distributed data bases, high technology input/output devices, and very sophisticated simulation tools are used regularly. Therefore, information transfer and the sharing of advances in technology are very important issues that must be addressed regularly.This report contains complete papers and abstracts of papers that were presented at the 1988 NCTM. The report is divided into topical sections that reflect common areas of interest and application. In each section, papers are presented first followed by abstracts. For these proceedings, the publication of a complete paper or only an abstract was at the discretion of the author, although complete papers were encouraged.Some papers presented at the 1988 NCTM are not published in these proceedings.

Probabilistic Mass Growth Uncertainties

NASA Technical Reports Server (NTRS)

Plumer, Eric; Elliott, Darren

2013-01-01

Mass has been widely used as a variable input parameter for Cost Estimating Relationships (CER) for space systems. As these space systems progress from early concept studies and drawing boards to the launch pad, their masses tend to grow substantially, hence adversely affecting a primary input to most modeling CERs. Modeling and predicting mass uncertainty, based on historical and analogous data, is therefore critical and is an integral part of modeling cost risk. This paper presents the results of a NASA on-going effort to publish mass growth datasheet for adjusting single-point Technical Baseline Estimates (TBE) of masses of space instruments as well as spacecraft, for both earth orbiting and deep space missions at various stages of a project's lifecycle. This paper will also discusses the long term strategy of NASA Headquarters in publishing similar results, using a variety of cost driving metrics, on an annual basis. This paper provides quantitative results that show decreasing mass growth uncertainties as mass estimate maturity increases. This paper's analysis is based on historical data obtained from the NASA Cost Analysis Data Requirements (CADRe) database.

1988 DOE model conference proceedings: Volume 5

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

These Proceedings of the October 3--7, 1988 DOE Model Conference are a compilation of the papers that were presented in the technical or poster sessions at the conference papers and posters not submitted for publication are not included in the Proceedings. The Table of Contents lists the titles of papers as well as the names of the presenters. These individuals are not, in all cases, the primary authors of the papers published. The actual title pages, appearing later with the papers, show the primary author(s) and all co-authors. The papers in all three volumes of the Proceedings appear as theymore » were originally submitted for publication and have not been edited or changed in any way. Topics discussed in Volume 5 include environmental assessments and program strategies, waste treatment technologies, and regulations and compliance studies.« less

The integrated manual and automatic control of complex flight systems

NASA Technical Reports Server (NTRS)

Schmidt, D. K.

1986-01-01

The topics of research in this program include pilot/vehicle analysis techniques, identification of pilot dynamics, and control and display synthesis techniques for optimizing aircraft handling qualities. The project activities are discussed. The current technical activity is directed at extending and validating the active display synthesis procedure, and the pilot/vehicle analysis of the NLR rate-command flight configurations in the landing task. Two papers published by the researchers are attached as appendices.

An Inversion Method for Reconstructing Hall Thruster Plume Parameters from the Line Integrated Measurements (Preprint)

DTIC Science & Technology

2007-06-05

From - To) 05-06-2007 Technical Paper 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER An Inversion Method for Reconstructing Hall Thruster Plume...239.18 An Inversion Method for Reconstructing Hall Thruster Plume Parameters from Line Integrated Measurements (Preprint) Taylor S. Matlock∗ Jackson...dimensional estimate of the plume electron temperature using a published xenon collisional radiative model. I. Introduction The Hall thruster is a high

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solar-Lezama, Armando

The goal of the project was to develop a programming model that would significantly improve productivity in the high-performance computing domain by bringing together three components: a) Automated equivalence checking, b) Sketch-based program synthesis, and c) Autotuning. The report provides an executive summary of the research accomplished through this project. At the end of the report is appended a paper that describes in more detail the key technical accomplishments from this project, and which was published in SC 2014.

CONFERENCE NOTE: 1986 Conference on Precision Electromagnetic Measurements

NASA Astrophysics Data System (ADS)

1985-01-01

The 1986 CPEM—the next in the series of biennial international conferences on electromagnetic metrology and related fundamental physical constants— will be held on June 23 through June 27, 1986, at the National Bureau of Standards, Gaithersburg, Maryland, USA. Sponsors are: NBS, the IEEE Instrumentation and Measurement Society and the Union Radio Scientifique Internationale. Papers describing original work, not previously published or presented, covering the theory, design, performance, simulation, or application of electromagnetic standards, measurements, techniques, instruments, or systems, are sought for presentation at CPEM '86. Papers on absolute electrical measurements and the use of quantum phenomena as electrical standards are especially sought in preparation for the meeting late in 1986 of the Comité Consultatif D'Electricité of the CIPM to decide on the adoption of international values for the constants 2e/h and h/e2 for the definition of the volt and the ohm, respectively. All papers concerned with electromagnetic measurements and standards and with related fundamental physics will be considered. Papers in the following fields are considered to be especially appropriate: EM-related fundamental constants and standards Direct current, low frequency, and RF Time, time interval, and frequency Antennas and fields Microwaves and millimeter waves Infrared, visible, and ultraviolet radiation Lasers Electro- and fibre optics Cryo-electronics Automated measurements Technical calibration services. The Conference language will be English. Authors should request an author's kit for the submission of a summary (500 to 1000 words) and abstract (maximum of 50 words) to be used to facilitate paper selection by the Program Committee. The summary must describe clearly the new and significant results and their importance. Summaries must be received on or before 1 February 1986 and should be sent to: Mr Norman B Belecki, Technical Program Chairman, CPEM '86, National Bureau of Standards, B146, METROLOGY, Gaithersburg, MD 20899, USA. Authors will be notified before 15 March 1986 whether their papers have been accepted and informed of the type of session to which they have been assigned and of the publication of their full papers in the IEEE Transactions on Instrumentation and Measurement conference issue. Only papers actually presented at the Conference will be published! For further technical information contact: John R Sorrells, National Bureau of Standards, (301) 921-2727 or Norman B Belecki, National Bureau of Standards, (301) 921-2715. For further general information contact: Judy Wilson, National Bureau of Standards, (301) 921-2721.

Improving automation standards via semantic modelling: Application to ISA88.

PubMed

Dombayci, Canan; Farreres, Javier; Rodríguez, Horacio; Espuña, Antonio; Graells, Moisès

2017-03-01

Standardization is essential for automation. Extensibility, scalability, and reusability are important features for automation software that rely in the efficient modelling of the addressed systems. The work presented here is from the ongoing development of a methodology for semi-automatic ontology construction methodology from technical documents. The main aim of this work is to systematically check the consistency of technical documents and support the improvement of technical document consistency. The formalization of conceptual models and the subsequent writing of technical standards are simultaneously analyzed, and guidelines proposed for application to future technical standards. Three paradigms are discussed for the development of domain ontologies from technical documents, starting from the current state of the art, continuing with the intermediate method presented and used in this paper, and ending with the suggested paradigm for the future. The ISA88 Standard is taken as a representative case study. Linguistic techniques from the semi-automatic ontology construction methodology is applied to the ISA88 Standard and different modelling and standardization aspects that are worth sharing with the automation community is addressed. This study discusses different paradigms for developing and sharing conceptual models for the subsequent development of automation software, along with presenting the systematic consistency checking method. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

XXIV International Conference on Integrable Systems and Quantum symmetries (ISQS-24)

NASA Astrophysics Data System (ADS)

Burdík, Čestmír; Navrátil, Ondřej; Posta, Severin

2017-01-01

The XXIV International Conference on Integrable Systems and Quantum Symmetries (ISQS-24), organized by the Department of Mathematics, Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University Prague and the Bogoliubov Laboratory of Theoretical Physics of the Joint Institute for Nuclear Research, belongs to the successful series of conferences held at the Czech Technical University which began in 1992 and is devoted to problems of mathematical physics related to the theory of integrable systems, quantum groups and quantum symmetries. During the last 5 years, each of the conferences gathered around 110 scientists from all over the world. 43 papers of plenary lectures and contributions presented at ISQS-24 are published in the present issue of Journal of Physics: Conference Series.

Women and Feminism in Technical Communication: A Qualitative Content Analysis of Journal Articles Published in 1989 through 1997.

ERIC Educational Resources Information Center

Thompson, Isabelle

1999-01-01

Identifies 40 articles about women and feminism published in five technical communication journals in a period of nine years. Notes major themes, all concerning inclusion. Concludes that although research about women and feminism has been accepted as part of the scholarly purview of technical communication, the ways in which this research has…

1981 Bibliography of Technical Writing.

ERIC Educational Resources Information Center

Book, Virginia Alm; And Others

1982-01-01

Offers resources on technical writing published in 1981. Arranges the citations under the following categories: bibliographies, books, reviews, and articles on the profession; theory and philosophy; pedagogy; technical speech; research; designing degree programs; technical writing and the computer; writing technical articles and reports;…

NASA Lunar Impact Monitoring

NASA Technical Reports Server (NTRS)

Suggs, Robert M.; Moser, D. E.

2015-01-01

The MSFC lunar impact monitoring program began in 2006 in support of environment definition for the Constellation (return to Moon) program. Work continued by the Meteoroid Environment Office after Constellation cancellation. Over 330 impacts have been recorded. A paper published in Icarus reported on the first 5 years of observations and 126 calibrated flashes. Icarus: http://www.sciencedirect.com/science/article/pii/S0019103514002243; ArXiv: http://arxiv.org/abs/1404.6458 A NASA Technical Memorandum on flash locations is in press

Thermohydrodynamic Analysis of Cryogenic Liquid Turbulent Flow Fluid Film Bearings

NASA Technical Reports Server (NTRS)

San Andres, Luis

1996-01-01

This report describes a thermohydrodynamic analysis and computer programs for the prediction of the static and dynamic force response of fluid film bearings for cryogenic applications. The research performed addressed effectively the most important theoretical and practical issues related to the operation and performance of cryogenic fluid film bearings. Five computer codes have been licensed by the Texas A&M University to NASA centers and contractors and a total of 14 technical papers have been published.

Legitimizing Technical Communication in English Departments: Carolyn Miller's "Humanistic Rationale for Technical Writing"

ERIC Educational Resources Information Center

Moore, Patrick

2006-01-01

Carolyn Miller's oft-cited "Humanistic Rationale for Technical Writing," published in 1979, tries to give technical communication faculty more cultural capital in English departments controlled by literature professors. Miller replaces a positivistic emphasis in technical communication pedagogy with rhetoric. She shows how technical knowledge is…

1980 Bibliography of Technical Writing.

ERIC Educational Resources Information Center

Book, Virginia Alm; And Others

1981-01-01

Offers resources on technical writing that were published in 1980. Arranges the citations under 12 categories: bibliographies, books, reviews, and articles on theory and philosophy; pedagogy; writing technical articles and reports; research; technical writing and the computer; graphic/visual aids; correspondence; technical speech; and designing…

A Semi-Automated Workflow Solution for Data Set Publication

DOE PAGES

Vannan, Suresh; Beaty, Tammy W.; Cook, Robert B.; ...

2016-03-08

In order to address the need for published data, considerable effort has gone into formalizing the process of data publication. From funding agencies to publishers, data publication has rapidly become a requirement. Digital Object Identifiers (DOI) and data citations have enhanced the integration and availability of data. The challenge facing data publishers now is to deal with the increased number of publishable data products and most importantly the difficulties of publishing diverse data products into an online archive. The Oak Ridge National Laboratory Distributed Active Archive Center (ORNL DAAC), a NASA-funded data center, faces these challenges as it deals withmore » data products created by individual investigators. This paper summarizes the challenges of curating data and provides a summary of a workflow solution that ORNL DAAC researcher and technical staffs have created to deal with publication of the diverse data products. Finally, the workflow solution presented here is generic and can be applied to data from any scientific domain and data located at any data center.« less

A Semi-Automated Workflow Solution for Data Set Publication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vannan, Suresh; Beaty, Tammy W.; Cook, Robert B.

In order to address the need for published data, considerable effort has gone into formalizing the process of data publication. From funding agencies to publishers, data publication has rapidly become a requirement. Digital Object Identifiers (DOI) and data citations have enhanced the integration and availability of data. The challenge facing data publishers now is to deal with the increased number of publishable data products and most importantly the difficulties of publishing diverse data products into an online archive. The Oak Ridge National Laboratory Distributed Active Archive Center (ORNL DAAC), a NASA-funded data center, faces these challenges as it deals withmore » data products created by individual investigators. This paper summarizes the challenges of curating data and provides a summary of a workflow solution that ORNL DAAC researcher and technical staffs have created to deal with publication of the diverse data products. Finally, the workflow solution presented here is generic and can be applied to data from any scientific domain and data located at any data center.« less

Analysis and classification of the tools for assessing the risks associated with industrial machines.

PubMed

Paques, Joseph-Jean; Gauthier, François; Perez, Alejandro

2007-01-01

To assess and plan future risk-analysis research projects, 275 documents describing methods and tools for assessing the risks associated with industrial machines or with other sectors such as the military, and the nuclear and aeronautics industries, etc., were collected. These documents were in the format of published books or papers, standards, technical guides and company procedures collected throughout industry. From the collected documents, 112 documents were selected for analysis; 108 methods applied or potentially applicable for assessing the risks associated with industrial machines were analyzed and classified. This paper presents the main quantitative results of the analysis of the methods and tools.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

This publication list is a bibliography of scientific and technical accounts originated at Argonne and published during the fiscal year 1969 (July 1, 1968 through June 30, 1969). It includes items published as journal articles, technical reports, books, etc., all of which have been made available to the public.

Guidelines for Composing and Assessing a Paper on Treatment of Pain.

PubMed

Bogduk, Nikolai; Kennedy, David J; Vorobeychik, Yakov; Engel, Andrew

2017-11-01

Authors, readers, and editors share a common focus. Authors want to publish their work. Readers want to see high-quality, new information. Referees and editors serve to ensure that authors provide valid conclusions based on the quality of information that readers want.Common to each of these roles are instructions to authors. However, these are typically written in an uninspiring, legalistic style, as if they are a set of rules that authors must obey if they expect to get published. This renders the instructions boring and oppressive, if not forbidding. Yet they need not be so, if they are set in context.Instructions to authors can be cast in a way as to reflect common purpose. They can remind authors what perceptive readers want to see in a paper and, thereby, prompt authors to include all necessary information. If cast in this way, instructions to authors are not a set of rules by which to satisfy publishers; they become guidelines for the etiquette of communication between authors and their readers.Against this background, the present article has been composed to serve several purposes. Foremost, it amplifies instructions to authors beyond the conventional technicalities such as headings, layout, font size, and line spacing. It prescribes the type of information that should be communicated and explains the reasons for those recommendations. Doing so not only informs authors about what to write, but also informs readers and referees about what to look for in a good paper. Secondarily, the article publicizes examples of errors and deficiencies of manuscripts submitted to the Journal in the past that have delayed their acceptance and publication, which could have been avoided had the forthcoming recommendations been followed. The recommendations also reprise the elements taught in courses conducted by the Spine Intervention Society in their extended program on evidence-based medicine. Doing so underscores that instructions for authors are not a procedural technicality but a way to ensure that what authors write, what readers read, and what the Journal publishes comply with contemporary precepts of good evidence.Some 20 years ago, the Journal of the American Medical Association published a comprehensive series of articles with a common title: "Users' Guides to the Medical Literature" [1,2]. These articles focused on the science of statistical tests and critical appraisal, and their importance for properly understanding the literature. The present article differs in that it does not presume to teach technicalities. Instead, it describes and explains, step by step, the critical components of an article, what authors should include, and what readers should look for, so that the Journal can ensure that consistent, high-quality information is shared between its authors and readers.The present article focuses on articles concerning treatment of pain, largely because this type of article is more commonly submitted than articles on reliability or validity of diagnostic procedures. Although the present article principally focuses on papers for the Spine Section of the Journal, the same principles, appropriately adapted, serve for other sections. © 2017 American Academy of Pain Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Towards a data publishing framework for primary biodiversity data: challenges and potentials for the biodiversity informatics community

PubMed Central

Chavan, Vishwas S; Ingwersen, Peter

2009-01-01

Background Currently primary scientific data, especially that dealing with biodiversity, is neither easily discoverable nor accessible. Amongst several impediments, one is a lack of professional recognition of scientific data publishing efforts. A possible solution is establishment of a 'Data Publishing Framework' which would encourage and recognise investments and efforts by institutions and individuals towards management, and publishing of primary scientific data potentially on a par with recognitions received for scholarly publications. Discussion This paper reviews the state-of-the-art of primary biodiversity data publishing, and conceptualises a 'Data Publishing Framework' that would help incentivise efforts and investments by institutions and individuals in facilitating free and open access to biodiversity data. It further postulates the institutionalisation of a 'Data Usage Index (DUI)', that would attribute due recognition to multiple players in the data collection/creation, management and publishing cycle. Conclusion We believe that institutionalisation of such a 'Data Publishing Framework' that offers socio-cultural, legal, technical, economic and policy environment conducive for data publishing will facilitate expedited discovery and mobilisation of an exponential increase in quantity of 'fit-for-use' primary biodiversity data, much of which is currently invisible. PMID:19900298

Towards a data publishing framework for primary biodiversity data: challenges and potentials for the biodiversity informatics community.

PubMed

Chavan, Vishwas S; Ingwersen, Peter

2009-11-10

Currently primary scientific data, especially that dealing with biodiversity, is neither easily discoverable nor accessible. Amongst several impediments, one is a lack of professional recognition of scientific data publishing efforts. A possible solution is establishment of a 'Data Publishing Framework' which would encourage and recognise investments and efforts by institutions and individuals towards management, and publishing of primary scientific data potentially on a par with recognitions received for scholarly publications. This paper reviews the state-of-the-art of primary biodiversity data publishing, and conceptualises a 'Data Publishing Framework' that would help incentivise efforts and investments by institutions and individuals in facilitating free and open access to biodiversity data. It further postulates the institutionalisation of a 'Data Usage Index (DUI)', that would attribute due recognition to multiple players in the data collection/creation, management and publishing cycle. We believe that institutionalisation of such a 'Data Publishing Framework' that offers socio-cultural, legal, technical, economic and policy environment conducive for data publishing will facilitate expedited discovery and mobilisation of an exponential increase in quantity of 'fit-for-use' primary biodiversity data, much of which is currently invisible.

Proceedings: 1995 SO{sub 2} control symposium. Volume 3, Sessions 6a, 6b, 7a, 7b

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

Cosponsored by EPRI, DOE, and EPA, this conference provided a forum for the exchange of economic, technical, and regulatory information on sulfur dioxide control technology. From March 28--31, 1995, participants presented 100 technical papers to an audience of 525 people from around the world. Given in thirteen technical sessions, the papers included regulatory and economic issues, wet and dry SO{sub 2} control processes, emerging technologies, and experience with Clean Air Act Amendments (CAAA) Phase I startups. The fifteenth in a series of symposia over the past two decades, the conference included these key points: the domestic flue gas desulfurization (FGD)more » market is likely to be modest over the next ten years, with most activity overseas; FGD awards could reach over $4 billion a year from 1996--2003, with more than half going to Eastern Europe and Asia; worldwide, at the start of 1994, FGD systems were installed on 609 coal-fired power plants; the average capital cost for Phase I retrofits has been $233/kW; and, trends point to simpler designs, such as towers that operate at higher gas velocities with fewer internals. Published proceedings from these regularly scheduled symposia are valuable resources for engineers and utility planners who need up-to-date information to comply with clean air legislation. Selected papers have been processed separately for inclusion in the Energy Science and Technology database.« less

Proceedings: 1995 SO{sub 2} control symposium. Volume 2, Sessions 4a, 4b, 5a, 5b

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

Cosponsored by EPRI, DOE, and EPA, this conference provided a forum for the exchange of economic, technical, and regulatory information on sulfur dioxide control technology. From March 28--31, 1995, participants presented 100 technical papers to an audience of 525 people from around the world. Given in thirteen technical sessions, the papers included regulatory and economic issues, wet and dry SO{sub 2} control processes, emerging technologies, and experience with Clean Air Act Amendments (CAAA) Phase I startups. The fifteenth in a series of symposia over the past two decades, the conference included these key points: the domestic flue gas desulfurization (FGD)more » market is likely to be modest over the next ten years, with most activity overseas; FGD awards could reach over $4 billion a year from 1996--2003, with more than half going to Eastern Europe and Asia; worldwide, at the start of 1994, FGD systems were installed on 609 coal-fired power plants; the average capital cost for Phase I retrofits has been $233/kW; and, trends point to simpler designs, such as towers that operate at higher gas velocities with fewer internals. Published proceedings from these regularly scheduled symposia are valuable resources for engineers and utility planners who need up-to-date information to comply with clean air legislation. Selected papers have been processed separately for inclusion in the Energy Science and Technology database.« less

Technical Books & Monographs, 1977 Catalog.

ERIC Educational Resources Information Center

Energy Research and Development Administration, Oak Ridge, TN.

This publication is an annotated bibliography of technical books and monographs sponsored by the Energy Research and Development Administration (ERDA) and its predecessor agencies. These entries have been published by commercial publishers, nonprofit institutions and organizations, and the federal government. The books and monographs are grouped…

Evaluation of human exposure to complex waveform magnetic fields generated by arc-welding equipment according to European safety standards.

PubMed

Zoppetti, Nicola; Bogi, Andrea; Pinto, Iole; Andreuccetti, Daniele

2015-02-01

In this paper, a procedure is described for the assessment of human exposure to magnetic fields with complex waveforms generated by arc-welding equipment. The work moves from the analysis of relevant guidelines and technical standards, underlining their strengths and their limits. Then, the procedure is described with particular attention to the techniques used to treat complex waveform fields. Finally, the procedure is applied to concrete cases encountered in the workplace. The discussion of the results highlights the critical points in the procedure, as well as those related to the evolution of the technical and exposure standards. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Security analysis of RSA cryptosystem algorithm and it’s properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Chenglian; Guo, Yongning, E-mail: guoyn@163.com, E-mail: linjuanliucaihong@qq.com; Lin, Juan, E-mail: guoyn@163.com, E-mail: linjuanliucaihong@qq.com

2014-10-06

The information technology rapidly development and dramatically changed the life style people, in addition to shortening the distance of communication, but also promote the smooth exchange of information flows. However, derivatives to facilitate the relative safety of these issues, since into the digital information age, the majority of the practitioners of engineering and technical personnel and technical workers in terms of technology, information security is increasingly becoming an important issue. The RSA algorithm was published in 1978. It is a kind of very popular and widely application modem cryptosystem in the world. Even though there are lots of articles tomore » discuss about how to break the RSA, but it is still secure today. In this paper, the authors would like to introduce a variant attack to RSA.« less

47 CFR 68.608 - Publication of technical criteria.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Attachments § 68.608 Publication of technical criteria. The Administrative Council for Terminal Attachments shall place technical criteria proposed for publication on public notice for 30 days. At the end of the... Attachments shall publish the technical criteria. ...

47 CFR 68.608 - Publication of technical criteria.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Attachments § 68.608 Publication of technical criteria. The Administrative Council for Terminal Attachments shall place technical criteria proposed for publication on public notice for 30 days. At the end of the... Attachments shall publish the technical criteria. ...

Paleobiologic Studies of the Antiquity and Precambrian Evolution of Life

NASA Technical Reports Server (NTRS)

Schopf, J. William

1998-01-01

This paper presents a final technical report on Paleobiologic Studies of the Antiquity and Precambrian Evolution of Life from 1 January 1990 - 30 September 1997. The topics include: 1) Major Research Accomplishments Supported By NAGW-2147 (Research Results Communicated in Edited Books, Research Results Communicated in Journal Articles and Book Chapters, and References Cited); and 2) Published Contributions Supported by NAGW-2147 (Edited Books, Journal Articles and Book Chapters, Book-Related Items, Miscellaneous Publications, Abstracts, and In Press).

Nuclear Technology Division annual progress report for period ending June 30, 1972

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1972-10-01

This document is a report of progress on technical programs of the Nuclear Technology,Division of Aerojet Nuclear Company for FY 72 ending June 30, 1972. It contains abstracts or expansions of abstracts of papers which have been published within the year. In these cases, preprints or reprints of the articles available. Results of work in progress are also reported; since this work is of a preliminary nature, the authors should be contacted before including any reference to these works in other publications.

Ulysses Data Analysis: Magnetic Topology of Heliospheric Structures

NASA Technical Reports Server (NTRS)

Crooker, Nancy

2001-01-01

In this final technical report on research funded by a NASA grant, a project overview is given by way of summaries on nine published papers. Research has included: 1) Using suprathermal electron data to study heliospheric magnetic structures; 2) Analysis of magnetic clouds, coronal mass ejections (CME), and the heliospheric current sheet (HCS); 3) Analysis of the corotating interaction region (CIR) which develop from interactions between solar wind streams of different velocities; 4) Use of Ulysses data in the interpretation of heliospheric events and phenomena.

Cancer survival: an overview of measures, uses, and interpretation.

PubMed

Mariotto, Angela B; Noone, Anne-Michelle; Howlader, Nadia; Cho, Hyunsoon; Keel, Gretchen E; Garshell, Jessica; Woloshin, Steven; Schwartz, Lisa M

2014-11-01

Survival statistics are of great interest to patients, clinicians, researchers, and policy makers. Although seemingly simple, survival can be confusing: there are many different survival measures with a plethora of names and statistical methods developed to answer different questions. This paper aims to describe and disseminate different survival measures and their interpretation in less technical language. In addition, we introduce templates to summarize cancer survival statistic organized by their specific purpose: research and policy versus prognosis and clinical decision making. Published by Oxford University Press 2014.

The new Adelaide medium frequency Doppler radar

NASA Astrophysics Data System (ADS)

Reid, I. M.; Vandepeer, B. G. W.; Dillon, S.; Fuller, B.

1993-08-01

The Buckland Park Aerial Array (35 deg S, 138 deg E) is situated about 40 km north of Adelaide on a flat coastal plain. It was designed by Basil Briggs and Graham Elford, and constructed between 1965 and 1968. The first results were published in the late 1960's. Some aspects of the history of the array are described in Briggs (1993). A new MF Doppler Radar utilizing the array has been developed. This paper describes some of the technical details of this new facility.

Automatic Publishing of Library Bulletins.

ERIC Educational Resources Information Center

Inbal, Moshe

1980-01-01

Describes the use of a computer to publish library bulletins that list recent accessions of technical reports according to the subject classification scheme of NTIS/SRIM (National Technical Information Service's Scientific Reports in Microfiche). The codes file, the four computer program functions, and costs/economy are discussed. (JD)

Open Access Publishing in the Electronic Age.

PubMed

Kovács, Gábor L

2014-10-01

The principle of open-access (OA) publishing is more and more prevalent also on the field of laboratory medicine. Open-access journals (OAJs) are available online to the reader usually without financial, legal, or technical barriers. Some are subsidized, and some require payment on behalf of the author. OAJs are one of the two general methods for providing OA. The other one is self-archiving in a repository. The electronic journal of the IFCC (eJIFCC) is a platinum OAJ- i.e. there is no charge to read, or to submit to this journal. Traditionally, the author was required to transfer the copyright to the journal publisher. Publishers claimed this was necessary in order to protect author's rights. However, many authors found this unsatisfactory, and have used their influence to affect a gradual move towards a license to publish instead. Under such a system, the publisher has permission to edit, print, and distribute the article commercially, but the author(s) retain the other rights themselves. An OA mandate is a policy adopted by a research institution, research funder, or government which requires researchers to make their published, peer-reviewed journal articles and conference papers OA by self-archiving their peer-reviewed drafts in a repository ("green OA") or by publishing them in an OAJ ("gold OA"). Creative Commons (CC) is a nonprofit organization that enables the sharing and use of creativity and knowledge through free legal tools. The free, easy-to-use copyright licenses provide a simple, standardized way to give the public permission to share and use creative work. CC licenses let you easily change your copyright terms from the default of "all rights reserved" to "some rights reserved." OA publishing also raises a number of new ethical problems (e.g. predatory publishers, fake papers). Laboratory scientists are encouraged to publish their scientific results OA (especially in eJIFCC). They should, however, be aware of their rights, institutional mandate, the procedures of publishing and post-printing, and the potential risks of OAP. Recent research shows that OA articles are wider seen, and are just starting to be better cited than equivalent papers published in traditional subscription journals.

76 FR 16235 - Corporate Credit Unions, Technical Corrections

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-23

... NATIONAL CREDIT UNION ADMINISTRATION 12 CFR Part 707 RIN 3133-AD58 Corporate Credit Unions... 2010, NCUA issued technical corrections to its corporate credit union rule, published in the Federal... October 2010, NCUA published a comprehensive overhaul to its corporate credit union rule, 12 CFR part 704...

Summary of the analyses for recovery factors

USGS Publications Warehouse

Verma, Mahendra K.

2017-07-17

IntroductionIn order to determine the hydrocarbon potential of oil reservoirs within the U.S. sedimentary basins for which the carbon dioxide enhanced oil recovery (CO2-EOR) process has been considered suitable, the CO2 Prophet model was chosen by the U.S. Geological Survey (USGS) to be the primary source for estimating recovery-factor values for individual reservoirs. The choice was made because of the model’s reliability and the ease with which it can be used to assess a large number of reservoirs. The other two approaches—the empirical decline curve analysis (DCA) method and a review of published literature on CO2-EOR projects—were deployed to verify the results of the CO2 Prophet model. This chapter discusses the results from CO2 Prophet (chapter B, by Emil D. Attanasi, this report) and compares them with results from decline curve analysis (chapter C, by Hossein Jahediesfanjani) and those reported in the literature for selected reservoirs with adequate data for analyses (chapter D, by Ricardo A. Olea).To estimate the technically recoverable hydrocarbon potential for oil reservoirs where CO2-EOR has been applied, two of the three approaches—CO2 Prophet modeling and DCA—do not include analysis of economic factors, while the third approach—review of published literature—implicitly includes economics. For selected reservoirs, DCA has provided estimates of the technically recoverable hydrocarbon volumes, which, in combination with calculated amounts of original oil in place (OOIP), helped establish incremental CO2-EOR recovery factors for individual reservoirs.The review of published technical papers and reports has provided substantial information on recovery factors for 70 CO2-EOR projects that are either commercially profitable or classified as pilot tests. When comparing the results, it is important to bear in mind the differences and limitations of these three approaches.

Technical Subjects in Secondary Schools

ERIC Educational Resources Information Center

Howard, A. E.

2008-01-01

Purpose: This paper aims to examine technical education in various types of secondary schools, and suggests three levels of technical courses to be taught in secondary schools. Design/methodology/approach: The paper discusses the differences between technical schools and colleges, and vocational technical courses taught in "academic"…

Report of the United Nations Interregional Seminar on the Employment, Development and Role of Scientists and Technical Personnel in the Public Service of Developing Countries, Volume III: Technical Papers.

ERIC Educational Resources Information Center

United Nations, New York, NY. Dept. of Economic and Social Affairs.

This collection of papers is the third of three volumes presenting the proceedings of the United Nations Interregional Seminar on the Employment, Development and Role of Scientists and Technical Personnel in the Public Service of Developing Countries (Volume I, Report of the Seminar; Volume II, Country Papers; and Volume III, Technical Papers).…

The Effect of Digital Publishing on Technical Services in University Libraries

ERIC Educational Resources Information Center

Hunter, Ben

2013-01-01

The past decade has brought enormous changes in scholarly communication, leading many libraries to undertake large-scale digital publishing initiatives. However, no study has investigated how technical services departments are changing to support these new services. Using change management as a theoretical framework, the investigator uses content…

Science Directorate Publications and Presentations: January 1-December 31, 2000

NASA Astrophysics Data System (ADS)

Summers, F. G.

2001-07-01

This document lists the significant publications and presentations of the Science Directorate during the period January 1 - December 31, 2000. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Also included for completeness is an Appendix (arranged by page number). Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publication in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature.

Access to data and the information explosion: oral contraceptives and risk of cancer.

PubMed

Weiner, J M; Shirley, S; Gilman, N J; Stowe, S M; Wolf, R M

1981-09-01

This report describes a technically feasible method to deal with the enormous volume of literature published regarding oral contraceptives. This subject was discussed in 3735 publications during the period from November 1977 through October 1980. Our findings showed that those papers reporting original, numeric relationships involving risk of cancer and use of oral contraceptives were one percent of the total 3735 publications. However, only seven of the 27 articles involved were authored by individuals from departments of obstetrics and gynecology. Further, only four of the 27 were published in journals devoted to obstetrics and gynecology. The analyses suggest a form of censorship taking place, in that the obstetrics/gynecology specialists do not have ready access to the primary data.

Science Directorate Publications and Presentations: January 1-December 31, 2000

NASA Technical Reports Server (NTRS)

Summers, F. G. (Compiler)

2001-01-01

This document lists the significant publications and presentations of the Science Directorate during the period January 1 - December 31, 2000. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Also included for completeness is an Appendix (arranged by page number). Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publication in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature.

Impulse position control algorithms for nonlinear systems

NASA Astrophysics Data System (ADS)

Sesekin, A. N.; Nepp, A. N.

2015-11-01

The article is devoted to the formalization and description of impulse-sliding regime in nonlinear dynamical systems that arise in the application of impulse position controls of a special kind. The concept of trajectory impulse-sliding regime formalized as some limiting network element Euler polygons generated by a discrete approximation of the impulse position control This paper differs from the previously published papers in that it uses a definition of solutions of systems with impulse controls, it based on the closure of the set of smooth solutions in the space of functions of bounded variation. The need for the study of such regimes is the fact that they often arise when parry disturbances acting on technical or economic control system.

Space Sciences Laboratory publications and presentations, 1 January - 31 December, 1993

NASA Technical Reports Server (NTRS)

Moorehead, T. W.

1994-01-01

This document lists the significant publications and presentations of the Space Sciences Laboratory during the period January 1 to December 31, 1993. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Also included for completeness is an Appendix (arranged by report number) listing preprints issued by the Laboratory during this reporting period. Some of the preprints have not been published; those already published are so indicated. Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publications in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature. The organizational code of the cognizant SSL branch or office is given at the end of each entry.

Space Sciences Laboratory Publications and Presentations

NASA Technical Reports Server (NTRS)

Moorehead, T. W. (Compiler)

1995-01-01

This document lists the significant publications and presentations of the Space Sciences Laboratory during the period Jan. 1 - Dec. 31, 1994. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Also included for completeness is an appendix (arranged by report number) listing preprints issued by the laboratory during this reporting period. Some of the preprints have not been published; those already published are so indicated. Most of the articles listed under Open Literature have appeared in referenced professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publications in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature. The organizational code of the cognizant SSL branch or office is given at the end of each entry.

Space Science Laboratory Publications and Presentations

NASA Technical Reports Server (NTRS)

Moorehead, T. W. (Compiler)

1993-01-01

This document lists the significant publications and presentations of the Space Science Laboratory during the period January 1 - December 31, 1992. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Also included for completeness is an Appendix (arranged by report number) listing preprints issued by the Laboratory during this reporting period. Some of the preprints have not been published; those already published are so indicated. Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publications in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature. The organizational code of the cognizant SSL branch or office is given at the end of each entry.

Compassionate containment? Balancing technical safety and therapy in the design of psychiatric wards.

PubMed

Curtis, Sarah; Gesler, Wilbert; Wood, Victoria; Spencer, Ian; Mason, James; Close, Helen; Reilly, Joseph

2013-11-01

This paper contributes to the international literature examining design of inpatient settings for mental health care. Theoretically, it elaborates the connections between conceptual frameworks from different strands of literature relating to therapeutic landscapes, social control and the social construction of risk. It does so through a discussion of the substantive example of research to evaluate the design of a purpose built inpatient psychiatric health care facility, opened in 2010 as part of the National Health Service (NHS) in England. Findings are reported from interviews or discussion groups with staff, patients and their family and friends. This paper demonstrates a strong, and often critical awareness among members of staff and other participants about how responsibilities for risk governance of 'persons' are exercised through 'technical safety' measures and the implications for therapeutic settings. Our participants often emphasised how responsibility for technical safety was being invested in the physical infrastructure of certain 'places' within the hospital where risks are seen to be 'located'. This illuminates how the spatial dimensions of social constructions of risk are incorporated into understandings about therapeutic landscapes. There were also more subtle implications, partly relating to 'Panopticist' theories about how the institution uses technical safety to supervise its own mechanisms, through the observation of staff behaviour as well as patients and visitors. Furthermore, staff seemed to feel that in relying on technical safety measures they were, to a degree, divesting themselves of human responsibility for risks they are required to manage. However, their critical assessment showed their concerns about how this might conflict with a more therapeutic approach and they contemplated ways that they might be able to engage more effectively with patients without the imposition of technical safety measures. These findings advance our thinking about the construction of therapeutic landscapes in theory and in practice. Copyright © 2013. Published by Elsevier Ltd.

Surgical ergonomics. Analysis of technical skills, simulation models and assessment methods.

PubMed

Papaspyros, Sotiris C; Kar, Ashok; O'Regan, David

2015-06-01

Over the past two centuries the surgical profession has undergone a profound evolution in terms of efficiency and outcomes. Societal concerns in relation to quality assurance, patient safety and cost reduction have highlighted the issue of training expert surgeons. The core elements of a training model build on the basic foundations of gross and fine motor skills. In this paper we provide an analysis of the ergonomic principles involved and propose relevant training techniques. We have endeavored to provide both the trainer and trainee perspectives. This paper is structured into four sections: 1) Pre-operative preparation issues, 2) technical skills and instrument handling, 3) low fidelity simulation models and 4) discussion of current concepts in crew resource management, deliberate practice and assessment. Rehearsal, warm-up and motivation-enhancing techniques aid concentration and focus. Appropriate posture, comprehension of ergonomic principles in relation to surgical instruments and utilisation of the non-dominant hand are essential skills to master. Low fidelity models can be used to achieve significant progress through the early stages of the learning curve. Deliberate practice and innate ability are complementary to each other and may be considered useful adjuncts to surgical skills development. Safe medical care requires that complex patient interventions be performed by highly skilled operators supported by reliable teams. Surgical ergonomics lie at the heart of any training model that aims to produce professionals able to function as leaders of a patient safety oriented culture. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

From pre-registration to publication: a non-technical primer for conducting a meta-analysis to synthesize correlational data

PubMed Central

Quintana, Daniel S.

2015-01-01

Meta-analysis synthesizes a body of research investigating a common research question. Outcomes from meta-analyses provide a more objective and transparent summary of a research area than traditional narrative reviews. Moreover, they are often used to support research grant applications, guide clinical practice, and direct health policy. The aim of this article is to provide a practical and non-technical guide for psychological scientists that outlines the steps involved in planning and performing a meta-analysis of correlational datasets. I provide a supplementary R script to demonstrate each analytical step described in the paper, which is readily adaptable for researchers to use for their analyses. While the worked example is the analysis of a correlational dataset, the general meta-analytic process described in this paper is applicable for all types of effect sizes. I also emphasize the importance of meta-analysis protocols and pre-registration to improve transparency and help avoid unintended duplication. An improved understanding this tool will not only help scientists to conduct their own meta-analyses but also improve their evaluation of published meta-analyses. PMID:26500598

From pre-registration to publication: a non-technical primer for conducting a meta-analysis to synthesize correlational data.

PubMed

Quintana, Daniel S

2015-01-01

Meta-analysis synthesizes a body of research investigating a common research question. Outcomes from meta-analyses provide a more objective and transparent summary of a research area than traditional narrative reviews. Moreover, they are often used to support research grant applications, guide clinical practice, and direct health policy. The aim of this article is to provide a practical and non-technical guide for psychological scientists that outlines the steps involved in planning and performing a meta-analysis of correlational datasets. I provide a supplementary R script to demonstrate each analytical step described in the paper, which is readily adaptable for researchers to use for their analyses. While the worked example is the analysis of a correlational dataset, the general meta-analytic process described in this paper is applicable for all types of effect sizes. I also emphasize the importance of meta-analysis protocols and pre-registration to improve transparency and help avoid unintended duplication. An improved understanding this tool will not only help scientists to conduct their own meta-analyses but also improve their evaluation of published meta-analyses.

Nondestructive Evaluation of Adhesively Bonded Joints

NASA Technical Reports Server (NTRS)

Nayeb-Hashemi, Hamid; Rossettos, J. N.

1997-01-01

The final report consists of 5 published papers in referred journals and a technical letter to the technical monitor. These papers include the following: (1) Comparison of the effects of debonds and voids in adhesive; (2) On the peak shear stresses in adhesive joints with voids; (3) Nondestructive evaluation of adhesively bonded joints by acousto-ultrasonic technique and acoustic emission; (4) Multiaxial fatigue life evaluation of tubular adhesively bonded joints; (5) Theoretical and experimental evaluation of the bond strength under peeling loads. The letter outlines the progress of the research. Also included is preliminary information on the study of nondestructive evaluation of composite materials subjected to localized heat damage. The investigators studied the effects of localized heat on unidirectional fiber glass epoxy composite panels. Specimens of the fiber glass epoxy composites were subjected to 400 C heat for varying lengths of time. The specimens were subjected to nondestructive tests. The specimens were then pulled to their failure and acoustic emission of these specimens were measured. The analysis of the data was continuing as of the writing of the letter, and includes a finite element stress analysis of the problem.

HSE's safety assessment principles for criticality safety.

PubMed

Simister, D N; Finnerty, M D; Warburton, S J; Thomas, E A; Macphail, M R

2008-06-01

The Health and Safety Executive (HSE) published its revised Safety Assessment Principles for Nuclear Facilities (SAPs) in December 2006. The SAPs are primarily intended for use by HSE's inspectors when judging the adequacy of safety cases for nuclear facilities. The revised SAPs relate to all aspects of safety in nuclear facilities including the technical discipline of criticality safety. The purpose of this paper is to set out for the benefit of a wider audience some of the thinking behind the final published words and to provide an insight into the development of UK regulatory guidance. The paper notes that it is HSE's intention that the Safety Assessment Principles should be viewed as a reflection of good practice in the context of interpreting primary legislation such as the requirements under site licence conditions for arrangements for producing an adequate safety case and for producing a suitable and sufficient risk assessment under the Ionising Radiations Regulations 1999 (SI1999/3232 www.opsi.gov.uk/si/si1999/uksi_19993232_en.pdf).

NASA Scientific and Technical Information Standards

NASA Technical Reports Server (NTRS)

2006-01-01

This document presents general recommended standards for documenting scientific and technical information (STI) from a number of scientific and engineering disciplines. It is a companion publication to NASA SP-7084, "Grammar, Punctuation, and Capitalization: A Handbook for Technical Writers and Editors," and is intended primarily for STI personnel and publishing personnel within NASA and who support NASA STI publishing. Section 1 gives an overview of NASA STI publications. Section 2 discusses figure preparation considerations. Section 3 covers table design, and Section 4 gives information about symbols and math related to STI publishing. Section 5 covers units of measure. Section 6 discusses References, and Section 7 discusses electronic documents. Section 8 covers information related to the review of STI prior to publication; this covers both technical and dissemination review and approval, including data quality. Section 9 discusses printing and dissemination related to STI, and Section 10 gives abbreviations and acronyms used in the document.

Does integration of HIV and sexual and reproductive health services improve technical efficiency in Kenya and Swaziland? An application of a two-stage semi parametric approach incorporating quality measures.

PubMed

Obure, Carol Dayo; Jacobs, Rowena; Guinness, Lorna; Mayhew, Susannah; Vassall, Anna

2016-02-01

Theoretically, integration of vertically organized services is seen as an important approach to improving the efficiency of health service delivery. However, there is a dearth of evidence on the effect of integration on the technical efficiency of health service delivery. Furthermore, where technical efficiency has been assessed, there have been few attempts to incorporate quality measures within efficiency measurement models particularly in sub-Saharan African settings. This paper investigates the technical efficiency and the determinants of technical efficiency of integrated HIV and sexual and reproductive health (SRH) services using data collected from 40 health facilities in Kenya and Swaziland for 2008/2009 and 2010/2011. Incorporating a measure of quality, we estimate the technical efficiency of health facilities and explore the effect of integration and other environmental factors on technical efficiency using a two-stage semi-parametric double bootstrap approach. The empirical results reveal a high degree of inefficiency in the health facilities studied. The mean bias corrected technical efficiency scores taking quality into consideration varied between 22% and 65% depending on the data envelopment analysis (DEA) model specification. The number of additional HIV services in the maternal and child health unit, public ownership and facility type, have a positive and significant effect on technical efficiency. However, number of additional HIV and STI services provided in the same clinical room, proportion of clinical staff to overall staff, proportion of HIV services provided, and rural location had a negative and significant effect on technical efficiency. The low estimates of technical efficiency and mixed effects of the measures of integration on efficiency challenge the notion that integration of HIV and SRH services may substantially improve the technical efficiency of health facilities. The analysis of quality and efficiency as separate dimensions of performance suggest that efficiency may be achieved without sacrificing quality. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

The Natural Hospital Environment: a Socio-Technical-Material perspective.

PubMed

Fernando, Juanita; Dawson, Linda

2014-02-01

This paper introduces two concepts into analyses of information security and hospital-based information systems-- a Socio-Technical-Material theoretical framework and the Natural Hospital Environment. The research is grounded in a review of pertinent literature with previously published Australian (Victoria) case study data to analyse the way clinicians work with privacy and security in their work. The analysis was sorted into thematic categories, providing the basis for the Natural Hospital Environment and Socio-Technical-Material framework theories discussed here. Natural Hospital Environments feature inadequate yet pervasive computer use, aural privacy shortcomings, shared workspace, meagre budgets, complex regulation that hinders training outcomes and out-dated infrastructure and are highly interruptive. Working collaboratively in many cases, participants found ways to avoid or misuse security tools, such as passwords or screensavers for patient care. Workgroup infrastructure was old, architecturally limited, haphazard in some instances, and was less useful than paper handover sheets to ensure the quality of patient care outcomes. Despite valiant efforts by some participants, they were unable to control factors influencing the privacy of patient health information in public hospital settings. Future improvements to hospital-based organisational frameworks for e-health can only be made when there is an improved understanding of the Socio-Technical-Material theoretical framework and Natural Hospital Environment contexts. Aspects within control of clinicians and administrators can be addressed directly although some others are beyond their control. An understanding and acknowledgement of these issues will benefit the management and planning of improved and secure hospital settings. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Proceedings-1979 third annual practical conference on communication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-04-01

Topics covered at the meeting include: nonacademic writing, writer and editor training in technical publications, readability of technical documents, guide for beginning technical editors, a visual aids data base, newsletter publishing, style guide for a project management organization, word processing, computer graphics, text management for technical documentation, and typographical terminology.

Naval Training Device Center Index of Technical Reports.

ERIC Educational Resources Information Center

Walker, Lemuel E.

Published Naval Training Device Center technical reports and some technical notes (those available through the Defense Documentation Center-DDC) which have resulted from basic research, exploratory development, and advanced development type projects are listed. The reports are indexed by technical note number, by title, and by contractor code. The…

Technical Features of Curriculum-Based Measurement in Writing: A Literature Review

ERIC Educational Resources Information Center

McMaster, Kristen; Espin, Christine

2007-01-01

This article reviews research examining technical features of curriculum-based measurement (CBM) in written expression. Twenty-eight technical reports and published articles are included in this review. Studies examining the development and technical adequacy of measures of written expression are summarized, beginning with research conducted at…

How to investigate neuro-biochemical relationships on a regional level in humans? Methodological considerations for combining functional with biochemical imaging.

PubMed

Duncan, Niall W; Wiebking, Christine; Munoz-Torres, Zeidy; Northoff, Georg

2013-10-25

There is an increasing interest in combining different imaging modalities to investigate the relationship between neural and biochemical activity. More specifically, imaging techniques like MRS and PET that allow for biochemical measurement are combined with techniques like fMRI and EEG that measure neural activity in different states. Such combination of neural and biochemical measures raises not only technical issues, such as merging the different data sets, but also several methodological issues. These methodological issues - ranging from hypothesis generation and hypothesis-guided use of technical facilities to target measures and experimental measures - are the focus of this paper. We discuss the various methodological problems and issues raised by the combination of different imaging methodologies in order to investigate neuro-biochemical relationships on a regional level in humans. For example, the choice of transmitter and scan type is discussed, along with approaches to allow the establishment of particular specificities (such as regional or biochemical) to in turn make results fully interpretable. An algorithm that can be used as a form of checklist for designing such multimodal studies is presented. The paper concludes that while several methodological and technical caveats needs to be overcome and addressed, multimodal imaging of the neuro-biochemical relationship provides an important tool to better understand the physiological mechanisms of the human brain. Copyright © 2013. Published by Elsevier B.V.

Final report on the Seventh International Comparison of Absolute Gravimeters (ICAG 2005)

USGS Publications Warehouse

Jiang, Z.; Francis, O.; Vitushkin, L.; Palinkas, V.; Germak, A.; Becker, M.; D'Agostino, G.; Amalvict, M.; Bayer, R.; Bilker-Koivula, M.; Desogus, S.; Faller, J.; Falk, R.; Hinderer, J.; Gagnon, C.; Jakob, T.; Kalish, E.; Kostelecky, J.; Lee, C.; Liard, J.; Lokshyn, Y.; Luck, B.; Makinen, J.; Mizushima, S.; Le, Moigne N.; Origlia, C.; Pujol, E.R.; Richard, P.; Robertsson, L.; Ruess, D.; Schmerge, D.; Stus, Y.; Svitlov, S.; Thies, S.; Ullrich, C.; Van Camp, M.; Vitushkin, A.; Ji, W.; Wilmes, H.

2011-01-01

The Bureau International des Poids et Mesures (BIPM), S??vres, France, hosted the 7th International Comparison of Absolute Gravimeters (ICAG) and the associated Relative Gravity Campaign (RGC) from August to September 2005. ICAG 2005 was prepared and performed as a metrological pilot study, which aimed: To determine the gravity comparison reference values; To determine the offsets of the absolute gravimeters; and As a pilot study to accumulate experience for the CIPM Key Comparisons. This document presents a complete and extensive review of the technical protocol and data processing procedures. The 1st ICAG-RGC comparison was held at the BIPM in 1980-1981 and since then meetings have been organized every 4 years. In this paper, we present an overview of how the meeting was organized, the conditions of BIPM gravimetric sites, technical specifications, data processing strategy and an analysis of the final results. This 7th ICAG final report supersedes all previously published reports. Readings were obtained from participating instruments, 19 absolute gravimeters and 15 relative gravimeters. Precise levelling measurements were carried out and all measurements were performed on the BIPM micro-gravity network which was specifically designed for the comparison. ?? 2011 BIPM & IOP Publishing Ltd.

Iridium: failures & successes

NASA Astrophysics Data System (ADS)

Christensen, CarissaBryce; Beard, Suzette

2001-03-01

This paper will provide an overview of the Iridium business venture in terms of the challenges faced, the successes achieved, and the causes of the ultimate failure of the venture — bankruptcy and system de-orbit. The paper will address technical, business, and policy issues. The intent of the paper is to provide a balanced and accurate overview of the Iridium experience, to aid future decision-making by policy makers, the business community, and technical experts. Key topics will include the history of the program, the objectives and decision-making of Motorola, the market research and analysis conducted, partnering strategies and their impact, consumer equipment availability, and technical issues — target performance, performance achieved, technical accomplishments, and expected and unexpected technical challenges. The paper will use as sources trade media and business articles on the Iridium program, technical papers and conference presentations, Wall Street analyst's reports, and, where possible, interviews with participants and close observers.

Relational Study of Technical Education in Scotland and Nigeria for Sustainable Skill Development

ERIC Educational Resources Information Center

Umunadi, E. Kennedy

2014-01-01

This paper was designed to look at technical education curriculum and mode of implementation in Scotland in order to adopt the advantageous attributes of the Scottish technical education in Nigeria. The paper x-rayed the staff perceptions of technical education and its roles in Scotland; history of technical education before the advent of British…

A novel highly flexible, simple, rapid and low-cost fabrication tool for paper-based microfluidic devices (μPADs) using technical drawing pens and in-house formulated aqueous inks.

PubMed

Nuchtavorn, Nantana; Macka, Mirek

2016-05-05

Paper-based microfluidic devices (μPADs) are capable of achieving rapid quantitative measurements of a variety of analytes inexpensively. μPADs rely on patterning hydrophilic-hydrophobic regions on a sheet of paper in order to create capillary channels within impermeable fluidic brakes on the paper. Here, we present a novel, highly flexible and low-cost fabrication method using a desktop digital craft plotter/cutter and technical drawing pens with tip size of 0.5 mm. The pens were used with either commercial black permanent ink for drawing fluidic brakes, or with specialty in-house formulated aqueous inks. With the permanent marker ink it was possible to create barriers on paper rapidly and in a variety of designs in a highly flexible manner. For instance, a design featuring eight reservoirs can be produced within 10 s for each μPAD with a consistent line width of brakes (%RSD < 1.5). Further, we investigated the optimal viscosity range of in-house formulated inks controlled with additions of poly(ethylene glycol). The viscosity was measured by capillary electrophoresis and the optimal viscosity was in the range of ∼3-6 mPa s. A functional test of these μPADs was conducted by the screening of antioxidant activity. Colorimetric measurements of flavonoid, phenolic compounds and DPPH free radical scavenging activity were carried out on μPADs. The results can be detected by the naked eye and simply quantified by using a camera phone and image analysis software. The fabrication method using technical drawing pens provides flexibility in the use of in-house formulated inks, short fabrication time, simplicity and low cost. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.

High speed fiber optics local area networks: Design and implementation

NASA Technical Reports Server (NTRS)

Tobagi, Fouad A.

1988-01-01

The design of high speed local area networks (HSLAN) for communication among distributed devices requires solving problems in three areas: (1) the network medium and its topology; (2) the medium access control; and (3) the network interface. Considerable progress has been made in all areas. Accomplishments are divided into two groups according to their theoretical or experimental nature. A brief summary is given in Section 2, including references to papers which appeared in the literature, as well as to Ph.D. dissertations and technical reports published at Stanford University.

Technical books and monographs. 1979 compilation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This booklet lists technical books and monographs published since the issuance of Technical Books and Monographs, 1978 Catalog, a bibliography of books and monographs sponsored by the US Department of Energy (DOE) or by one of the earlier organizations that were brought together to form DOE. In general, information for each published book, and for each book in press when known, includes title, author and author affiliation, publisher and publication date, page count, size of book, price, availability information if the book is not available from the publisher, Library of Congress card number, International Standard Book Number (ISBN), a briefmore » descriptive statement concerning the book, and a list or a description of the contents. The books and monographs are grouped under twelve subject categories: general reference, biology and medicine, chemistry, computers and mathematics, energy, engineering and instrumentation, environment, health and safety, isotope separation, metallurgy and materials, physics, and reactors. (RWR)« less

76 FR 21043 - Notice of Public Meeting: Technical Aspects of Mandatory Deposit of Published Electronic Works...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-14

... LIBRARY OF CONGRESS Copyright Office [Docket No. 2011-3] Notice of Public Meeting: Technical... Office, Library of Congress. ACTION: Notice of public meeting. SUMMARY: The U.S. Copyright Office of the Library of Congress will host a public meeting on May 24, 2011, with members of the publishing community...

Research and technology, Lewis Research Center

NASA Technical Reports Server (NTRS)

1985-01-01

The NASA Lewis Research Center's research and technology accomplishments for fiscal year 1985 are summarized. The report is organized into five major sections covering aeronautics, aerospace technology, spaceflight systems, space station systems, and computational technology support. This organization of the report roughly parallels the organization of the Center into directorates. Where appropriate, subheadings are used to identify special topics under the major headings. Results of all research and technology work performed during the fiscal year are contained in Lewis-published technical reports and presentations prepared either by Lewis scientists and engineers or by contractor personnel. In addition, significant results are presented by university faculty or graduate students in technical sessions and in journals of the technical societies. For the reader who desires more information about a particular subject, the Lewis contact will provide that information or references. In 1985, five Lewis products were selected by Research and Development Magazine for IR-100 awards. All are described and identified. In addition, the Lewis Distinguished Paper for 1984 to 1985, which was selected by the Chief Scientist and a research advisory board, is included and so identified.

77 FR 65760 - Request for Public Comments To Compile the Reports on Sanitary and Phytosanitary and Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-30

... Technical Barriers to Trade (2012 TBT Report) respectively. The TPSC invites written comments from the... Reports on Sanitary and Phytosanitary and Technical Barriers to Trade AGENCY: Office of the United States... (USTR) is required to publish annually the Reports on Sanitary and Phytosanitary and Technical Barriers...

Multi-criteria decision analysis in environmental sciences: ten years of applications and trends.

PubMed

Huang, Ivy B; Keisler, Jeffrey; Linkov, Igor

2011-09-01

Decision-making in environmental projects requires consideration of trade-offs between socio-political, environmental, and economic impacts and is often complicated by various stakeholder views. Multi-criteria decision analysis (MCDA) emerged as a formal methodology to face available technical information and stakeholder values to support decisions in many fields and can be especially valuable in environmental decision making. This study reviews environmental applications of MCDA. Over 300 papers published between 2000 and 2009 reporting MCDA applications in the environmental field were identified through a series of queries in the Web of Science database. The papers were classified by their environmental application area, decision or intervention type. In addition, the papers were also classified by the MCDA methods used in the analysis (analytic hierarchy process, multi-attribute utility theory, and outranking). The results suggest that there is a significant growth in environmental applications of MCDA over the last decade across all environmental application areas. Multiple MCDA tools have been successfully used for environmental applications. Even though the use of the specific methods and tools varies in different application areas and geographic regions, our review of a few papers where several methods were used in parallel with the same problem indicates that recommended course of action does not vary significantly with the method applied. Published by Elsevier B.V.

Supplement to the Carcinogenic Potency Database (CPDB): results of animal bioassays published in the general literature in 1993 to 1994 and by the National Toxicology Program in 1995 to 1996.

PubMed Central

Gold, L S; Manley, N B; Slone, T H; Rohrbach, L

1999-01-01

The Carcinogenic Potency Database (CPDB) is a systematic and unifying analysis of results of chronic, long-term cancer tests. This paper presents a supplemental plot of the CPDB, including 513 experiments on 157 test compounds published in the general literature in 1993 and 1994 and in Technical Reports of the National Toxicology Program in 1995 and 1996. The plot standardizes the experimental results (whether positive or negative for carcinogenicity), including qualitative data on strain, sex, route of compound administration, target organ, histopathology, and author's opinion and reference to the published paper, as well as quantitative data on carcinogenic potency, statistical significance, tumor incidence, dose-response curve shape, length of experiment, duration of dosing, and dose rate. A numerical description of carcinogenic potency, the TD(subscript)50(/subscript), is estimated for each set of tumor incidence data reported. When added to the data published earlier, the CPDB now includes results of 5,620 experiments on 1,372 chemicals that have been reported in 1,250 published papers and 414 National Cancer Institute/National Toxicology Program Technical Reports. The plot presented here includes detailed analyses of 25 chemicals tested in monkeys for up to 32 years by the National Cancer Institute. Half the rodent carcinogens that were tested in monkeys were not carcinogenic, despite usually strong evidence of carcinogenicity in rodents and/or humans. Our analysis of possible explanatory factors indicates that this result is due in part to the fact that the monkey studies lacked power to detect an effect compared to standard rodent bioassays. Factors that contributed to the lack of power are the small number of animals on test; a stop-exposure protocol for model rodent carcinogens; in a few cases, toxic doses that resulted in stoppage of dosing or termination of the experiment; and in a few cases, low doses administered to monkeys or early termination of the experiment even though the doses were not toxic. Among chemicals carcinogenic in both monkeys and rodents, there is some support for target site concordance, but it is primarily restricted to liver tumors. Potency values are highly correlated between rodents and monkeys. The plot in this paper can be used in conjunction with the earlier results published in the CRC Handbook of Carcinogenic Potency and Genotoxicity Databases [Gold LS, Zeiger E, eds. Boca Raton FL:CRC Press, 1997] and with our web site (http://potency.berkeley.edu), which includes a guide to the plot of the database, a complete description of the numerical index of carcinogenic potency (TD50), and a discussion of the sources of data, the rationale for the inclusion of particular experiments and particular target sites, and the conventions adopted in summarizing the literature. Two summary tables permit easy access to the literature of animal cancer tests by target organ and by chemical. For readers using the CPDB extensively, a combined plot on diskette or other format is available from the first author. It includes all results published earlier and in this paper, ordered alphabetically by chemical. A SAS database is also available. PMID:10421768

Updated standards and processes for accreditation of echocardiographic laboratories from The European Association of Cardiovascular Imaging.

PubMed

Popescu, Bogdan A; Stefanidis, Alexandros; Nihoyannopoulos, Petros; Fox, Kevin F; Ray, Simon; Cardim, Nuno; Rigo, Fausto; Badano, Luigi P; Fraser, Alan G; Pinto, Fausto; Zamorano, Jose Luis; Habib, Gilbert; Maurer, Gerald; Lancellotti, Patrizio; Andrade, Maria Joao; Donal, Erwan; Edvardsen, Thor; Varga, Albert

2014-07-01

Standards for echocardiographic laboratories were proposed by the European Association of Echocardiography (now the European Association of Cardiovascular Imaging) 7 years ago in order to raise standards of practice and improve the quality of care. Criteria and requirements were published at that time for transthoracic, transoesophageal, and stress echocardiography. This paper reassesses and updates the quality standards to take account of experience and the technical developments of modern echocardiographic practice. It also discusses quality control, the incentives for laboratories to apply for accreditation, the reaccreditation criteria, and the current status and future prospects of the laboratory accreditation process. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2014. For permissions please email: journals.permissions@oup.com.

Technical Writing: Past, Present, and Future.

ERIC Educational Resources Information Center

Mathes, J. C., Comp.; Pinelli, Thomas E., Comp.

This compilation of papers addresses the history, present status, and trends of technical and related writing. The first of the eight papers surveys the present environment of the technical report and assesses the effectiveness of the technical report format of the National Aeronautics and Space Administration (NASA) in transmitting information.…

Overview of the 9th International Conference on Hydrodynamics

NASA Astrophysics Data System (ADS)

Lu, Dong-qiang

2010-10-01

The 9th International Conference on Hydrodynamics (ICHD), held in Shanghai, China from 11 to 15 October, 2010, was briefly reviewed. More than 240 delegates from 23 countries and regions attended this Conference, at which three plenary lectures, two keynote lectures and more than 160 papers were delivered. A special symposium on hydrodynamics in honor of Prof. You-sheng He was jointly organized in this ICHD. The printed proceedings, edited by Y. S. Wu, S. Q. Dai, H. Liu et al. and published by China Ocean Press, collect 172 technical papers contributed from 26 countries and regions. The electronic proceedings are distributed by the Elsevier at the ScienceDirect website as "Journal of Hydrodynamics, 2010, Vol. 22, No. 5 (Supplement)".

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carnes, E.T.; Truett, D.F.; Truett, L.F.

In the handful of years since the World Wide Web (WWW or Web) came into being, Web sites have developed at an astonishing rate. With the influx of Web pages comes a disparity of site types, including personal homepages, commercial sales sites, and educational data. The variety of sites and the deluge of information contained on the Web exemplify the individual nature of the WWW. Whereas some people argue that it is this eclecticism which gives the Web its charm, we propose that sites which are repositories of technical data would benefit from standardization. This paper proffers a methodology formore » publishing ecological research on the Web. The template we describe uses capabilities of HTML (the HyperText Markup Language) to enhance the value of the traditional scientific paper.« less

Impulse position control algorithms for nonlinear systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sesekin, A. N., E-mail: sesekin@list.ru; Institute of Mathematics and Mechanics, Ural Division of Russian Academy of Sciences, 16 S. Kovalevskaya, Ekaterinburg, 620990; Nepp, A. N., E-mail: anepp@urfu.ru

2015-11-30

The article is devoted to the formalization and description of impulse-sliding regime in nonlinear dynamical systems that arise in the application of impulse position controls of a special kind. The concept of trajectory impulse-sliding regime formalized as some limiting network element Euler polygons generated by a discrete approximation of the impulse position control This paper differs from the previously published papers in that it uses a definition of solutions of systems with impulse controls, it based on the closure of the set of smooth solutions in the space of functions of bounded variation. The need for the study of suchmore » regimes is the fact that they often arise when parry disturbances acting on technical or economic control system.« less

Synthesis of current knowledge on post-fire seeding for soil stabilization and invasive species control

USGS Publications Warehouse

Beyers, Jan L.; Pyke, David A.; Wirth, Troy

2015-01-01

The General Accounting Office has identified a need for better information on the effectiveness of post-fire emergency stabilization and rehabilitation methods used by the U.S. Forest Service and Department of Interior (DOI) agencies. Since reviews were published on treatment effectiveness in the early 2000s, treatment choices have changed and increased monitoring has been done. Greater use of native species has added substantially to burned area emergency response (BAER) treatment costs, for example, but quantitative data on this treatment were scarce in earlier reviews. We synthesized current information on the effectiveness of post-fire seeding for both soil stabilization and for prevention of the spread of invasive species in rangelands. We reviewed published literature (peer-reviewed and “gray”) and agency monitoring reports, as well as compiled and analyzed quantitative data in agency files. Products of this review include a web-accessible database of monitoring reports and published information, a scientific journal paper summarizing findings of scientific studies, an annotated bibliography of peer-reviewed papers, a summary report published as a General Technical Report that will be available online (in progress), and presentations to scientific meetings and BAER/ESR team training sessions and workshops. By combining results from studies done by Forest Service and DOI agency personnel with research studies published since the initial reviews, we presented a comprehensive synthesis of seeding effectiveness knowledge that complements the review of other hillslope treatments published by other researchers. This information will help federal land managers make more cost-effective decisions on post-fire stabilization and rehabilitation treatments.

Who are the SETI sceptics?

NASA Astrophysics Data System (ADS)

Ćirković, Milan M.

2013-08-01

Search for ExtraTerrestrial Intelligence (SETI) is now more than half a century old and has provoked enough discussion on technical, philosophical, and popular level, much of it critical. Historically, the criticism of SETI has been strong enough to heavily influence the course of research, so that there is a significant interest in discerning the nuances and fine points of critical argumentation. In this paper, I outline the two major forms of SETI scepticism, "fundamentalist" and "instrumentalist," which are often conflated in the published literature, both technical and popular. Precise delineation between these two types of scepticism is important for future research as a part of a wider taxonomic project, the build-up of SETI theory, as well as for smooth joining of SETI with the ongoing astrobiological revolution. Resolving the confusion in this respect is likely to lead to an improved atmosphere and heightened public image of future SETI searches and related activities.

Technical literature review.

PubMed

Nußbeck, Gunnar; Gök, Murat

2013-01-01

This review gives a comprehensive overview on the technical perspective of personal health monitoring. It is designed to build a mutual basis for the project partners of the PHM-Ethics project. A literature search was conducted to screen pertinent literature databases for relevant publications. All review papers that were retrieved were analyzed. The increasing number of publications that are published per year shows that the field of personal health monitoring is of growing interest in the research community. Most publications deal with telemonitoring, thus forming the core technology of personal health monitoring. Measured parameters, fields of application, participants and stakeholders are described. Moreover an outlook on information and communication technology that foster the integration possibilities of personal health monitoring into decision making and remote monitoring of individual people's health is provided. The removal of the technological barriers opens new perspectives in health and health care delivery using home monitoring applications.

Proprietary Manned Space Flight Proposals, 1973 to 2013, plus

NASA Astrophysics Data System (ADS)

Fisher, Philip

2016-03-01

In 1973 a concept for a manned space flight experiment was submitted to NASA as an unsolicited proprietary proposal,*. In 1998*, 2004*, and 2013* proposals successively more details were provided. An abbreviation of the 1998 proposal was published. By 2013 the five technical variables of 1998 had increased to over ten. Some technical and management details of the proposals will be presented and updated. The first flight of two could use some hardware now being developed. The experiment seems superior to any mission publicly advocated by NASA, so this talk's purpose is to encourage NASA to delay landing humans on Mars until the first spacecraft can be developed and activated. *Complete proposals are in the Philip C. Fisher papers, Niels Bohr Library and Archives, American Institute of Physics (available one year after author's death). Work after 1982 supported by successive forms of Ruffner Associates.

Introducing Development Education in Technical Universities: Successful Experiences in Spain

ERIC Educational Resources Information Center

Boni, A.; Perez-Foguet, A.

2008-01-01

This paper presents and analyses the main characteristics of successful experiences of Development Education (DE) introduced in two major Spanish Technical Universities (Technical University of Catalonia, TUC, and Technical University of Valencia, TUV) during the nineties and the beginning of the twenty-first century. In this paper, after a brief…

Lake States regional forest resources assessment: technical papers.

Treesearch

Henry H. Webster; J. Michael Vasievich

1997-01-01

Contains 21 technical working papers prepared for the Lake States regional forest resources assessment, Lake States Forestry Alliance 1995. They represent significant contributions from many individuals and organizations and form the technical background for the assessment.

75 FR 56857 - Pilot, Flight Instructor, and Pilot School Certification

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-17

... of part 141. Discussion of Technical Amendment Section 141.5(d) establishes the quality of training... Certification AGENCY: Federal Aviation Administration, DOT. ACTION: Final rule; technical amendment. SUMMARY: The Federal Aviation Administration (FAA) is making minor technical changes to a final rule published...

Computerized engineering logic for nuclear procurement and dedication processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tulay, M.P.

1996-12-31

In an attempt to better meet the needs of operations and maintenance organizations, many nuclear utility procurement engineering groups have simplified their procedures, developed on-line tools for performing the specification of replacement items, and developed relational databases containing part-level information necessary to automate the procurement process. Although these improvements have helped to reduce the engineering necessary to properly specify and accept/dedicate items for nuclear safety-related applications, a number of utilities have recognized that additional long-term savings can be realized by integrating a computerized logic to assist technical procurement engineering personnel. The most commonly used logic follows the generic processes containedmore » in Electric Power Research Institute (EPRI) published guidelines. The processes are typically customized to some extent to accommodate each utility`s organizational structure, operating procedures, and strategic goals. This paper will discuss a typical logic that integrates the technical evaluation, acceptance, and receipt inspection and testing processes. The logic this paper will describe has been successfully integrated at a growing number of nuclear utilities and has produced numerous positive results. The application of the logic ensures that utility-wide standards or procedures, common among multi-site utilities, are followed.« less

A review of technical aspects of T1-weighted dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) in human brain tumors.

PubMed

Bergamino, M; Bonzano, L; Levrero, F; Mancardi, G L; Roccatagliata, L

2014-09-01

In the last few years, several imaging methods, such as magnetic resonance imaging (MRI) and computed tomography, have been used to investigate the degree of blood-brain barrier (BBB) permeability in patients with neurological diseases including multiple sclerosis, ischemic stroke, and brain tumors. One promising MRI method for assessing the BBB permeability of patients with neurological diseases in vivo is T1-weighted dynamic contrast-enhanced (DCE)-MRI. Here we review the technical issues involved in DCE-MRI in the study of human brain tumors. In the first part of this paper, theoretical models for the DCE-MRI analysis will be described, including the Toft-Kety models, the adiabatic approximation to the tissue homogeneity model and the two-compartment exchange model. These models can be used to estimate important kinetic parameters related to BBB permeability. In the second part of this paper, details of the data acquisition, issues related to the arterial input function, and procedures for DCE-MRI image analysis are illustrated. Copyright © 2014 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

47 CFR 68.7 - Technical criteria for terminal equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... (CONTINUED) CONNECTION OF TERMINAL EQUIPMENT TO THE TELEPHONE NETWORK General § 68.7 Technical criteria for... switched telephone network. (b) Technical criteria published by the Administrative Council for Terminal... network from harms caused by the connection of terminal equipment, subject to the appeal procedures in...

47 CFR 68.7 - Technical criteria for terminal equipment.

Code of Federal Regulations, 2011 CFR

2011-10-01

... (CONTINUED) CONNECTION OF TERMINAL EQUIPMENT TO THE TELEPHONE NETWORK General § 68.7 Technical criteria for... switched telephone network. (b) Technical criteria published by the Administrative Council for Terminal... network from harms caused by the connection of terminal equipment, subject to the appeal procedures in...

Comment on "A convenient method for preparation of 2-amino-4,6-diphenylnicotinonitrile using HBF4 as an efficient catalyst via an anomeric based oxidation: A joint experimental and theoretical study" [J. Mol. Struct. 1137 (2017) 674-680

NASA Astrophysics Data System (ADS)

Salehzadeh, Sadegh; Maleki, Farahnaz

2018-02-01

The title paper contains two types of calculations that are in disagreement with some basic concepts of chemistry. The first one is calculating a macroscopic amount of energy difference between one pair of enantiomers that is not correct. The second one is that the different bond orders for R and S stereoisomers and for different pathways of hyperconjugation/electron delocalization have been reported that both are impossible. In addition, the term electron transfer has been wrongly used for donor-acceptor orbital interactions inside one molecule where nothing is oxidized or reduced. Furthermore, the paper has missed some necessary comparisons with a previously published work of authors. There are also some technical problems in the title paper that are discussed in the present comment article.

Evolution of Scholarly Publishing and Library Services in Astronomy Its Impact, Challenges, and Opportunities

NASA Astrophysics Data System (ADS)

Wesley, Hema; Sheshadri, Geetha

2016-10-01

Scholarly publishing and its procedures have evolved rapidly, forcefully, and incredibly. Technical advances in the production and promotion of science content have dramatically augmented the visibility and reach, deepened the impact and intensified the thrust of science journal content. These changes range from checking text on perforated tapes to pit stop; from hot metal types to CTP; and from Gutenberg to colour digital printers. Intrinsic and inextricable to this revolutionary aspect of evolution in scholarly publishing is the evolution of library services in astronomy which catapulted library resources from preprints on shelves to customised digital repositories and from communicating observational data through postal telegrams to Tablets. What impact does this unique blend of revolutionary advances have on science and society, what are the consequent challenges, and what are the opportunities that can metamorphose from challenges inherent in the power and potential of the `published word'? The perspectives expressed in this paper stem from learning experiences of the authors at the Indian Academy of Sciences, publishers of ten science journals including the Journal of Astrophysics and Astronomy, and at the Raman Research Institute Library (in which Astronomy is one of the core subjects for research)

Should Project Managers Buy Technical Data

DTIC Science & Technology

2017-04-06

Should Project Managers Buy Technical Data? Jerry Harper April 6, 2017 PUBLISHED BY The Defense...intellectual property (IP) management and technical data rights (TDR) strategies. According to DoD Instruction 5000.02 (DoD, 2017), project managers (PMs...Defense Authorization Act NDI ................nondevelopmental item PM ................. project manager R&D ...............research and development

The Intercultural Component in Textbooks for Teaching a Service Technical Writing Course

ERIC Educational Resources Information Center

Matveeva, Natalia

2007-01-01

This research article investigates new developments in the representation of the intercultural component in textbooks for a service technical writing course. Through textual analysis, using quantitative and qualitative techniques, I report discourse analysis of 15 technical writing textbooks published during 1993-2006. The theoretical and…

The Boston Study: Analysis of a Major Metropolitan Business- and Technical-Communication Market.

ERIC Educational Resources Information Center

Buchholz, William J.

1989-01-01

Presents a year-long study of the duties, skills, and knowledge required of business- and technical-communication professionals in Boston, Massachusetts. Focuses on six categories of practice: technical communication, publishing, public relations, marketing, development, and training. Suggests that in the next decade communication practitioners…

Trends in Career and Technical Education Research

ERIC Educational Resources Information Center

Rojewski, Jay W.; Asunda, Paul; Kim, Soo Jung

2008-01-01

The purpose of this literature review was to identify current trends and issues in research focusing on career and technical education (CTE). The primary sources of literature for this review included all research articles published in three refereed scholarly journals--"Career and Technical Education Research," "Journal of Career and Technical…

Soft skills and dental education.

PubMed

Gonzalez, M A G; Abu Kasim, N H; Naimie, Z

2013-05-01

Soft skills and hard skills are essential in the practice of dentistry. While hard skills deal with technical proficiency, soft skills relate to a personal values and interpersonal skills that determine a person's ability to fit in a particular situation. These skills contribute to the success of organisations that deal face-to-face with clients. Effective soft skills benefit the dental practice. However, the teaching of soft skills remains a challenge to dental schools. This paper discusses the different soft skills, how they are taught and assessed and the issues that need to be addressed in their teaching and assessment. The use of the module by the Faculty of Dentistry, University of Malaya for development of soft skills for institutions of higher learning introduced by the Ministry of Higher Education, Malaysia. © 2013 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

Science Directorate Publications and Presentations, January 1 - December 31, 2001

NASA Technical Reports Server (NTRS)

Summers, F. G. (Compiler)

2002-01-01

This TM lists the significant publications and presentation of the Science Directorate during the period January 1-December 31, 2001. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publication in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a section under Open Literature. Questions or requests for additional information about the entries in this report should be directed to Ann F. Whitaker (SD01; (256) 544-2481) or to one of the authors.

The Scottish Structural Proteomics Facility: targets, methods and outputs.

PubMed

Oke, Muse; Carter, Lester G; Johnson, Kenneth A; Liu, Huanting; McMahon, Stephen A; Yan, Xuan; Kerou, Melina; Weikart, Nadine D; Kadi, Nadia; Sheikh, Md Arif; Schmelz, Stefan; Dorward, Mark; Zawadzki, Michal; Cozens, Christopher; Falconer, Helen; Powers, Helen; Overton, Ian M; van Niekerk, C A Johannes; Peng, Xu; Patel, Prakash; Garrett, Roger A; Prangishvili, David; Botting, Catherine H; Coote, Peter J; Dryden, David T F; Barton, Geoffrey J; Schwarz-Linek, Ulrich; Challis, Gregory L; Taylor, Garry L; White, Malcolm F; Naismith, James H

2010-06-01

The Scottish Structural Proteomics Facility was funded to develop a laboratory scale approach to high throughput structure determination. The effort was successful in that over 40 structures were determined. These structures and the methods harnessed to obtain them are reported here. This report reflects on the value of automation but also on the continued requirement for a high degree of scientific and technical expertise. The efficiency of the process poses challenges to the current paradigm of structural analysis and publication. In the 5 year period we published ten peer-reviewed papers reporting structural data arising from the pipeline. Nevertheless, the number of structures solved exceeded our ability to analyse and publish each new finding. By reporting the experimental details and depositing the structures we hope to maximize the impact of the project by allowing others to follow up the relevant biology.

Resolving the challenges in the international comparison of health systems: the must do's and the trade-offs.

PubMed

Forde, Ian; Morgan, David; Klazinga, Niek S

2013-09-01

Countries are increasingly publishing health system performance statistics alongside those of their peers, to identify high performers and achieve a continuously improving health system. The aim of the paper is to identify, and discuss resolution of, some key methodological challenges, which arise when comparing health system performance. To illustrate the issues, we focus on two OECD flagship initiatives: the System of Health Accounts (SHA) and the Health Care Quality Indicators (HCQI) project and refer to two main actors: a coordinating agency, which proposes and collates performance data and second, data correspondents in constituent health systems, who submit data to the coordinating centre. Discussion is structured around two themes: a set of must-do's (legitimacy of the coordinating centre, validity of proposed indicators, feasibility of data collection and technical support for data correspondents) and a set of trade-offs (depth vs. breadth in the number of system elements compared, aggregation vs. granularity of data, flexibility vs. consistency of indicator definitions and inclusion criteria). Robust fulfillment of the must-do's and transparent resolution of the trade-offs both depend upon effective collaboration between the coordinating centre and data correspondents, and a close working relationship between a technical secretariat and a body of experts. Copyright © 2013 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

The Amateurs' Love Affair with Large Datasets

NASA Astrophysics Data System (ADS)

Price, Aaron; Jacoby, S. H.; Henden, A.

2006-12-01

Amateur astronomers are professionals in other areas. They bring expertise from such varied and technical careers as computer science, mathematics, engineering, and marketing. These skills, coupled with an enthusiasm for astronomy, can be used to help manage the large data sets coming online in the next decade. We will show specific examples where teams of amateurs have been involved in mining large, online data sets and have authored and published their own papers in peer-reviewed astronomical journals. Using the proposed LSST database as an example, we will outline a framework for involving amateurs in data analysis and education with large astronomical surveys.

A techno-economic approach to plasma gasification

NASA Astrophysics Data System (ADS)

Ramos, Ana; Rouboa, Abel

2018-05-01

Within the most used Waste-to-Energy technologies plasma gasification is recent and therefore not yet widely commercialized. Thus, it is necessary to conduct a viability study to support the thorough understanding and implementation of this thermal treatment. This paper aims to assess some technical, environmental and economic aspects of plasma gasification paving the way for a more sustained waste management system, as well as taking advantage of the commodity assets granted by the technique. Therefore, results from previously published studies were updated and highlighted as a preliminary starting point in order to potentially evolve to a complete and systematic work.

Geometric integration for particle accelerators

NASA Astrophysics Data System (ADS)

Forest, Étienne

2006-05-01

This paper is a very personal view of the field of geometric integration in accelerator physics—a field where often work of the highest quality is buried in lost technical notes or even not published; one has only to think of Simon van der Meer Nobel prize work on stochastic cooling—unpublished in any refereed journal. So I reconstructed the relevant history of geometrical integration in accelerator physics as much as I could by talking to collaborators and using my own understanding of the field. The reader should not be too surprised if this account is somewhere between history, science and perhaps even fiction.

Amateur Image Pipeline Processing using Python plus PyRAF

NASA Astrophysics Data System (ADS)

Green, Wayne

2012-05-01

A template pipeline spanning observing planning to publishing is offered as a basis for establishing a long term observing program. The data reduction pipeline encapsulates all policy and procedures, providing an accountable framework for data analysis and a teaching framework for IRAF. This paper introduces the technical details of a complete pipeline processing environment using Python, PyRAF and a few other languages. The pipeline encapsulates all processing decisions within an auditable framework. The framework quickly handles the heavy lifting of image processing. It also serves as an excellent teaching environment for astronomical data management and IRAF reduction decisions.

Final Technical Report DE-FG02-02ER45999

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunbar, Kim

Over the course of this period of funding, the PI published 62 papers and graduated 15 Ph.D. students supported by the grant. In addition 17 undergraduate students, 10 postdocs and 16 Visiting Scholars were also involved in this research. Over 150 talks at national and international conferences on the topic were given by the PI and her research group. Research topics included the following: geometrical and electronic control of anisotropy in mononuclear complexes, incorporation of titanium ions into magnetic materials, trans-dicyanide building blocks for chains, cyanometallate chemistry of highly anisotropic metal ions, and compounds with dianionic organocyanide ligands.

Report on research and technology-FY 1981

NASA Technical Reports Server (NTRS)

1981-01-01

More than 65 technical reports, papers, and articles published by personnel and contractors at the Dryden Flight Research Center are listed. Activities performed for the Offices of Aeronautics and Space Technology, Space and Terrestrial Applications, Space Transportation Systems, and Space Tracking and Data Systems are summarized. Preliminary stability and control derivatives were determined for the shuttle orbiter at hypersonic speeds from the data obtained at reentry. The shuttle tile tests, spin research vehicle nose shapes flight investigations, envelope expansion flights for the Ames tilt rotor research aircraft, and the AD-1 oblique wing programs were completed as well as the KC-135 winglet program.

The dilemma of BME research projects in developing countries: a case study.

PubMed

Zahedi, Edmond; Attar, Hamid Movahedian

2011-01-01

Researchers are faced with huge challenges when undertaking BME research projects in developing countries. Various administrative, technical, economic and even cultural barriers have to be overcome whereas the quality and quantity of the output has to be comparable with the developed world in order to make results publishable. This paper uses a real project context to highlight the major problems and the necessity of a holistic approach which would take into consideration all stakeholders interests. It is only by tackling problems such as relationship between academia-industry and administration efficiency at their root that significant progress can be achieved.

Freight Transportation : A Digest of Technical Papers. Volume 1.

DOT National Transportation Integrated Search

1976-10-28

This volume contains a number of technical papers dealing with intercity freight transportation. Collectively, these systems-oriented papers consider a wide range of subject matter including transportation facilitation, commodity flow, regulation, au...

Fiscal year 1977 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

White, O. L. (Compiler)

1977-01-01

This bibliography lists 78 NASA technical memoranda, notes, papers, and reports presented by Marshall Space Flight Center personnel in FY 1977. In addition, 525 papers by contractors to that facility are cited along with 129 papers cleared for presentation.

The Second Conference on Lunar Bases and Space Activities of the 21st Century, volume 1

NASA Technical Reports Server (NTRS)

Mendell, Wendell W. (Editor); Alred, John W. (Editor); Bell, Larry S. (Editor); Cintala, Mark J. (Editor); Crabb, Thomas M. (Editor); Durrett, Robert H. (Editor); Finney, Ben R. (Editor); Franklin, H. Andrew (Editor); French, James R. (Editor); Greenberg, Joel S. (Editor)

1992-01-01

These papers comprise a peer-review selection of presentations by authors from NASA, LPI industry, and academia at the Second Conference (April 1988) on Lunar Bases and Space Activities of the 21st Century, sponsored by the NASA Office of Exploration and the Lunar Planetary Institute. These papers go into more technical depth than did those published from the first NASA-sponsored symposium on the topic, held in 1984. Session topics covered by this volume include (1) design and operation of transportation systems to, in orbit around, and on the Moon, (2) lunar base site selection, (3) design, architecture, construction, and operation of lunar bases and human habitats, and (4) lunar-based scientific research and experimentation in astronomy, exobiology, and lunar geology.

Measurement and interpretation of crustal deformation rates associated with postglacial rebound

NASA Technical Reports Server (NTRS)

Davis, James L.

1994-01-01

This project involves obtaining GPS measurements in Scandinavia and using the measurements to estimate the viscosity profile of the earth's mantle and to correct tide-gauge measurements for the rebound effect. We report on several aspects of this project. The DSGS was not scheduled to be reoccupied with DOSE receivers during the report period. The permanent network set up by Onsala Space Observatory continues to operate, and the data are being evaluated. An important technical advance we intend for this project is to use the full three dimensional site velocity information for inferring geophysical parameters. During the report period, two papers have been been accepted for publication in the Journal of Geophysical Research and will be published in April. Reprints of these papers are contained in the Appendix.

Technical Writing across the Curriculum: Epics.

ERIC Educational Resources Information Center

Olds, Barbara M.

Noting that technically competent graduates of professional schools need additional skills to function effectively in an increasingly complex and global society, this paper describes an innovative program in technical writing developed for undergraduate engineering students at the Colorado School of Mines. The paper first provides background…

Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author, Volume 18 (1) through Volume 22 (6)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cottrell, W.B.; Passiakos, M.

This index to Nuclear Safety covers articles published in Nuclear Safety, Volume 18, Number 1 (January-February 1977) through Volume 22, Number 6 (November-December 1981). The index is divided into three section: a chronological list of articles (including abstracts), a permuted-title (KWIC) index, and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. Over 300 technical articles published in Nuclear Safety in the last 5 years are listed in this index.

NASA scientific and technical publications: A catalog of special publications, reference publications, conference publications, and technical papers, 1987-1990

NASA Technical Reports Server (NTRS)

1991-01-01

This catalog lists 783 citations of all NASA Special Publications, NASA Reference Publications, NASA Conference Publications, and NASA Technical Papers that were entered into NASA Scientific and Technical Information Database during the year's 1987 through 1990. The entries are grouped by subject category. Indexes of subject terms, personal authors, and NASA report numbers are provided.

NASA scientific and technical publications: A catalog of special publications, reference publications, conference publications, and technical papers, 1989

NASA Technical Reports Server (NTRS)

1990-01-01

This catalog lists 190 citations of all NASA Special Publications, NASA Reference Publications, NASA Conference Publications, and NASA Technical Papers that were entered into the NASA scientific and technical information database during accession year 1989. The entries are grouped by subject category. Indexes of subject terms, personal authors, and NASA report numbers are provided.

NASA scientific and technical publications: A catalog of special publications, reference publications, conference publications, and technical papers, 1991-1992

NASA Technical Reports Server (NTRS)

1993-01-01

This catalog lists 458 citations of all NASA Special Publications, NASA Reference Publications, NASA Conference Publications, and NASA Technical Papers that were entered into the NASA Scientific and Technical Information database during accession year 1991 through 1992. The entries are grouped by subject category. Indexes of subject terms, personal authors, and NASA report numbers are provided.

NASA scientific and technical publications: A catalog of Special Publications, Reference Publications, Conference Publications, and Technical Papers, 1987

NASA Technical Reports Server (NTRS)

1988-01-01

This catalog lists 239 citations of all NASA Special Publications, NASA Reference Publications, NASA Conference Publications, and NASA Technical Papers that were entered in the NASA scientific and technical information database during accession year 1987. The entries are grouped by subject category. Indexes of subject terms, personal authors, and NASA report numbers are provided.

Sixth plot of the carcinogenic potency database: results of animal bioassays published in the General Literature 1989 to 1990 and by the National Toxicology Program 1990 to 1993.

PubMed Central

Gold, L S; Manley, N B; Slone, T H; Garfinkel, G B; Ames, B N; Rohrbach, L; Stern, B R; Chow, K

1995-01-01

This paper presents two types of information from the Carcinogenic Potency Database (CPDB): (a) the sixth chronological plot of analyses of long-term carcinogenesis bioassays, and (b) an index to chemicals in all six plots, including a summary compendium of positivity and potency for each chemical (Appendix 14). The five earlier plots of the CPDB have appeared in this journal, beginning in 1984 (1-5). Including the plot in this paper, the CPDB reports results of 5002 experiments on 1230 chemicals. This paper includes bioassay results published in the general literature between January 1989 and December 1990, and in Technical Reports of the National Toxicology Program between January 1990 and June 1993. Analyses are included on 17 chemicals tested in nonhuman primates by the Laboratory of Chemical Pharmacology, National Cancer Institute. This plot presents results of 531 long-term, chronic experiments of 182 test compounds and includes the same information about each experiment in the same plot format as the earlier papers: the species and strain of test animal, the route and duration of compound administration, dose level and other aspects of experimental protocol, histopathology and tumor incidence, TD50 (carcinogenic potency) and its statistical significance, dose response, author's opinion about carcinogenicity, and literature citation. We refer the reader to the 1984 publications (1,6,7) for a detailed guide to the plot of the database, a complete description of the numerical index of carcinogenic potency, and a discussion of the sources of data, the rationale for the inclusion of particular experiments and particular target sites, and the conventions adopted in summarizing the literature. The six plots of the CPDB are to be used together since results of individual experiments that were published earlier are not repeated. Appendix 14 is designed to facilitate access to results on all chemicals. References to the published papers that are the source of experimental data are reported in each of the published plots. For readers using the CPDB extensively, a combined plot is available of all results from the six separate plot papers, ordered alphabetically by chemical; the combined plot in printed form or on computer tape or diskette is available from the first author. A SAS database is also available. PMID:8741772

78 FR 9631 - Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Residential...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-11

... planning to conduct in-depth technical analyses in the following areas: (1) Engineering; (2) energy-use... refer to the statute as amended through the American Energy Manufacturing Technical Corrections Act... technical amendment, which was published in the Federal Register on July 28, 2008, that codified the EISA...

Chinese-English Technical Dictionaries. Volume 1, Aviation and Space.

ERIC Educational Resources Information Center

Library of Congress, Washington, DC. Aerospace Technology Div.

The present dictionary is the first of a series of Chinese-English technical dictionaries under preparation by the Aerospace Technology Division of the Library of Congress. The purpose of the series is to provide rapid reference tools for translators, abstractors, and research analysts concerned with scientific and technical materials published in…

SCIENTIFIC AND TECHNICAL SOCIETIES PERTINENT TO THE EDUCATION OF TECHNICIANS. TECHNICAL EDUCATION PROGRAM SERIES NO. 7.

ERIC Educational Resources Information Center

BROOKING, WALTER J.

THIS LISTING OF SELECTED NATIONAL SCIENTIFIC AND TECHNICAL SOCIETIES WAS PUBLISHED TO ASSIST FEDERAL, STATE, AND LOCAL SCHOOL ADMINISTRATORS, SUPERVISORS, DEPARTMENT HEADS, TEACHERS, LIBRARIANS, AND GUIDANCE PERSONNEL TO UNDERSTAND BETTER THE SERVICES OF SUCH SOCIETIES AND TO PROVIDE AN EASILY ACCESSIBLE AND SCIENTIFIC GUIDE TO THEM. CHAPTER…

Technical Manual: easyCBM. Technical Report #1408

ERIC Educational Resources Information Center

Anderson, Daniel; Alonzo, Julie; Tindal, Gerald; Farley, Dan; Irvin, P. Shawn; Lai, Cheng-Fei; Saven, Jessica L.; Wray, Kraig A.

2014-01-01

Since the easyCBM© learning system was first published in 2006, over $8 million of federal funding (both from the Office of Special Education Programs and more recently from the Institute of Education Sciences) has been used to develop, study, and refine the assessments available on the system. This Technical Manual summarizes the ongoing research…

Review of Journal of Cardiovascular Magnetic Resonance (JCMR) 2015-2016 and transition of the JCMR office to Boston.

PubMed

Manning, Warren J

2017-12-28

The Journal of Cardiovascular Magnetic Resonance (JCMR) is the official publication of the Society for Cardiovascular Magnetic Resonance (SCMR). In 2016, the JCMR published 93 manuscripts, including 80 research papers, 6 reviews, 5 technical notes, 1 protocol, and 1 case report. The number of manuscripts published was similar to 2015 though with a 12% increase in manuscript submissions to an all-time high of 369. This reflects a decrease in the overall acceptance rate to <25% (excluding solicited reviews). The quality of submissions to JCMR continues to be high. The 2016 JCMR Impact Factor (which is published in June 2016 by Thomson Reuters) was steady at 5.601 (vs. 5.71 for 2015; as published in June 2016), which is the second highest impact factor ever recorded for JCMR. The 2016 impact factor means that the JCMR papers that were published in 2014 and 2015 were on-average cited 5.71 times in 2016.In accordance with Open-Access publishing of Biomed Central, the JCMR articles are published on-line in the order that they are accepted with no collating of the articles into sections or special thematic issues. For this reason, over the years, the Editors have felt that it is useful to annually summarize the publications into broad areas of interest or themes, so that readers can view areas of interest in a single article in relation to each other and other recent JCMR articles. The papers are presented in broad themes with previously published JCMR papers to guide continuity of thought in the journal. In addition, I have elected to open this publication with information for the readership regarding the transition of the JCMR editorial office to the Beth Israel Deaconess Medical Center, Boston and the editorial process.Though there is an author publication charge (APC) associated with open-access to cover the publisher's expenses, this format provides a much wider distribution/availability of the author's work and greater manuscript citation. For SCMR members, there is a substantial discount in the APC. I hope that you will continue to send your high quality manuscripts to JCMR for consideration. Importantly, I also ask that you consider referencing recent JCMR publications in your submissions to the JCMR and elsewhere as these contribute to our impact factor. I also thank our dedicated Associate Editors, Guest Editors, and reviewers for their many efforts to ensure that the review process occurs in a timely and responsible manner and that the JCMR continues to be recognized as the leading publication in our field.

A Multi-Discipline, Multi-Genre Digital Library for Research and Education

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Maly, Kurt; Shen, Stewart N. T.

2004-01-01

We describe NCSTRL+, a unified, canonical digital library for educational and scientific and technical information (STI). NCSTRL+ is based on the Networked Computer Science Technical Report Library (NCSTRL), a World Wide Web (WWW) accessible digital library (DL) that provides access to over 100 university departments and laboratories. NCSTRL+ implements two new technologies: cluster functionality and publishing "buckets". We have extended the Dienst protocol, the protocol underlying NCSTRL, to provide the ability to "cluster" independent collections into a logically centralized digital library based upon subject category classification, type of organization, and genres of material. The concept of "buckets" provides a mechanism for publishing and managing logically linked entities with multiple data formats. The NCSTRL+ prototype DL contains the holdings of NCSTRL and the NASA Technical Report Server (NTRS). The prototype demonstrates the feasibility of publishing into a multi-cluster DL, searching across clusters, and storing and presenting buckets of information.

NCSTRL+: Adding Multi-Discipline and Multi-Genre Support to the Dienst Protocol Using Clusters and Buckets

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Maly, Kurt; Shen, Stewart N. T.; Zubair, Mohammad

1998-01-01

We describe NCSTRL+, a unified, canonical digital library for scientific and technical information (STI). NCSTRL+ is based on the Networked Computer Science Technical Report Library (NCSTRL), a World Wide Web (WWW) accessible digital library (DL) that provides access to over 100 university departments and laboratories. NCSTRL+ implements two new technologies: cluster functionality and publishing buckets. We have extended Dienst, the protocol underlying NCSTRL, to provide the ability to cluster independent collections into a logically centralized digital library based upon subject category classification, type of organization, and genres of material. The bucket construct provides a mechanism for publishing and managing logically linked entities with multiple data forms as a single object. The NCSTRL+ prototype DL contains the holdings of NCSTRL and the NASA Technical Report Server (NTRS). The prototype demonstrates the feasibility of publishing into a multi-cluster DL, searching across clusters, and storing and presenting buckets of information.

Electronic Publishing and Library Technical Services.

ERIC Educational Resources Information Center

Aveney, Brian

1984-01-01

Trends in electronic editions, on-demand publishing, and online publishing are reviewed and their potential effects on library services and organization are discussed, including library material selection, acquisitions, cataloging, serials, circulation, and home printers. Thirteen references are provided. (EJS)

Do failures in non-technical skills contribute to fatal medical accidents in Japan? A review of the 2010-2013 national accident reports.

PubMed

Uramatsu, Masashi; Fujisawa, Yoshikazu; Mizuno, Shinya; Souma, Takahiro; Komatsubara, Akinori; Miki, Tamotsu

2017-02-16

We sought to clarify how large a proportion of fatal medical accidents can be considered to be caused by poor non-technical skills, and to support development of a policy to reduce number of such accidents by making recommendations about possible training requirements. Summaries of reports of fatal medical accidents, published by the Japan Medical Safety Research Organization, were reviewed individually. Three experienced clinicians and one patient safety expert conducted the reviews to determine the cause of death. Views of the patient safety expert were given additional weight in the overall determination. A total of 73 summary reports of fatal medical accidents were reviewed. These reports had been submitted by healthcare organisations across Japan to the Japan Medical Safety Research Organization between April 2010 and March 2013. The cause of death in fatal medical accidents, categorised into technical skills, non-technical skills and inevitable progress of disease were evaluated. Non-technical skills were further subdivided into situation awareness, decision making, communication, team working, leadership, managing stress and coping with fatigue. Overall, the cause of death was identified as non-technical skills in 34 cases (46.6%), disease progression in 33 cases (45.2%) and technical skills in two cases (5.5%). In two cases, no consensual determination could be achieved. Further categorisation of cases of non-technical skills were identified as 14 cases (41.2%) of problems with situation awareness, eight (23.5%) with team working and three (8.8%) with decision making. These three subcategories, or combinations of them, were identified as the cause of death in 33 cases (97.1%). Poor non-technical skills were considered to be a significant cause of adverse events in nearly half of the fatal medical accidents examined. Improving non-technical skills may be effective for reducing accidents, and training in particular subcategories of non-technical skills may be especially relevant. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Direct Final Rule for Technical Amendments for Marine Spark-Ignition Engines and Vessels

EPA Pesticide Factsheets

Rule published September 16, 2010 to make technical amendments to the design standard for portable marine fuel tanks. This rule incorporates safe recommended practices, developed through industry consensus.

Third chronological supplement to the carcinogenic potency database: standardized results of animal bioassays published through December 1986 and by the National Toxicology Program through June 1987.

PubMed Central

Gold, L S; Slone, T H; Backman, G M; Eisenberg, S; Da Costa, M; Wong, M; Manley, N B; Rohrbach, L; Ames, B N

1990-01-01

This paper is the third chronological supplement to the Carcinogenic Potency Database that first appeared in this journal in 1984. We report here results of carcinogenesis bioassays published in the general literature between January 1985 and December 1986, and in Technical Reports of the National Toxicology Program between June 1986 and June 1987. This supplement includes results of 337 long-term, chronic experiments of 121 compounds, and reports the same information about each experiment in the same plot format as the earlier papers, e.g., the species and strain of animal, the route and duration of compound administration, dose level, and other aspects of experimental protocol, histopathology, and tumor incidence, TD50 (carcinogenic potency) and its statistical significance, dose response, opinion of the author about carcinogenicity, and literature citation. The reader needs to refer to the 1984 publication for a guide to the plot of the database, a complete description of the numerical index of carcinogenic potency, and a discussion of the sources of data, the rationale for the inclusion of particular experiments and particular target sites, and the conventions adopted in summarizing the literature. The four plots of the database are to be used together as results published earlier are not repeated. In all, the four plots include results for approximately 4000 experiments on 1050 chemicals. Appendix 14 of this paper is an alphabetical index to all chemicals in the database and indicates which plot(s) each chemical appears in. A combined plot of all results from the four separate papers, that is ordered alphabetically by chemical, is available from the first author, in printed form or on computer tape or diskette. PMID:2351123

Collected Papers in Structural Mechanics Honoring Dr. James H. Starnes, Jr.

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr. (Compiler); Nemeth, Michael P. (Compiler); Malone, John B. (Compiler)

2006-01-01

This special publication contains a collection of structural mechanics papers honoring Dr. James H. Starnes, Jr. presented at the 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference held in Austin, Texas, April 18-21, 2005. Contributors to this publication represent a small number of those influenced by Dr. Starnes' technical leadership, his technical prowess and diversity, and his technical breath and depth in engineering mechanics. These papers cover some of the research areas Dr. Starnes investigated, which included buckling, postbuckling, and collapse of structures; composite structural mechanics, residual strength and damage tolerance of metallic and composite structures; and aircraft structural design, certification and verification. He actively pursued technical understanding and clarity, championed technical excellence, and modeled humility and perseverance.

Technical review of the da Vinci surgical telemanipulator.

PubMed

Freschi, C; Ferrari, V; Melfi, F; Ferrari, M; Mosca, F; Cuschieri, A

2013-12-01

The da Vinci robotic surgical telemanipulator has been utilized in several surgical specialties for varied procedures, and the users' experiences have been widely published. To date, no detailed system technical analyses have been performed. A detailed review was performed of all publications and patents about the technical aspects of the da Vinci robotic system. Published technical literature on the da Vinci system highlight strengths and weaknesses of the robot design. While the system facilitates complex surgical operations and has a low malfunction rate, the lack of haptic (especially tactile) feedback and collisions between the robotic arms remain the major limitations of the system. Accurate, preplanned positioning of access ports is essential. Knowledge of the technical aspects of the da Vinci robot is important for optimal use. We confirmed the excellent system functionality and ease of use for surgeons without an engineering background. Research and development of the surgical robot has been predominant in the literature. Future trends address robot miniaturization and intelligent control design. Copyright © 2012 John Wiley & Sons, Ltd.

The Importance of Proper Citation of References in Biomedical Articles

PubMed Central

Masic, Izet

2013-01-01

In scientific circles, the reference is the information that is necessary to the reader in identifying and finding used sources. The basic rule when listing the sources used is that references must be accurate, complete and should be consistently applied. On the other hand, quoting implies verbatim written or verbal repetition of parts of the text or words written by others that can be checked in original. Authors of every new scientific article need to explain how their study or research fits with previous one in the same or similar fields. A typical article in the health sciences refers to approximately 20-30 other articles published in peer reviewed journals, cite once or hundreds times. Citations typically appear in two formats: a) as in-text citations where the sources of information are briefly identified in the text; or b) in the reference list at the end of the publication (book chapter, manuscript, article, etc.) that provides full bibliographic information for each source. Group of publishers met in Vancouver in 1978 and decided to prescribe uniform technical propositions for publication. Adopted in the 1979 by the National Library of Medicine in Bethesda, then the International Committee of Medical Journals Editors (ICMJE), whose review in 1982 entered the official application by 300 international biomedical journals. Authors writing articles for publication in biomedical publications used predominantly citation styles: Vancouver style, Harward style, PubMed style, ICMJE, APA, etc. The paper gives examples of all of these styles of citation to the authors in order to facilitate their applications. Also in this paper is given the review about the problem of plagiarism which becomes more common in the writing of scientific and technical articles in biomedicine. PMID:24167381

Review of Excess Weapons Plutonium Disposition LLNL Contract Work in Russia-(English)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jardine, L; Borisov, G B

This third meeting of the recently completed and ongoing Russian plutonium immobilization contract work was held at the State Education Center (SEC) in St. Petersburg on January 14-18, 2002. The meeting agenda is reprinted here as Appendix A and the attendance list as Appendix B. The meeting had 58 Russian participants from 21 Russian organizations, including the industrial sites (Mayak, Krasonayarsk-26, Tomsk), scientific institutes (VNIINM, KRI, VNIPIPT, RIAR), design organizations (VNIPIET and GSPI), universities (Nyzhny Novgorod, Urals Technical), Russian Academy of Sciences (Institute of Physical Chemistry or IPhCh, Institute of Ore-Deposit Geology, Petrography, Mineralogy, and Geochemistry or IGEM), Radon-Moscow, S&TCmore » Podol'osk, Kharkov-Ukraine, GAN-SEC-NRS and SNIIChM, the RF Ministry of Atomic Energy (Minatom) and Gosatomnadzor (GAN). This volume, published by LLNL, documents this third annual meeting. Forty-nine technical papers were presented by the Russian participants, and nearly all of these have been collected in this Proceedings. The two objectives for the meeting were to: (1) Bring together the Russian organizations, experts, and managers performing this contract work into one place for four days to review and discuss their work amongst each other. (2) Publish a meeting summary and proceedings of all the excellent Russian plutonium immobilization and other plutonium disposition contract work in one document so that the wide extent of the Russian immobilization activities are documented, referencable and available for others to use, as were the Proceedings of the two previous meetings. Attendees gave talks describing their LLNL contract work and submitted written papers documenting their contract work (in English and Russian), in both hard copy and on computer disks. Simultaneous translation into Russian and English was used for presentations made at the State Region Educational Center (SEC).« less

The importance of proper citation of references in biomedical articles.

PubMed

Masic, Izet

2013-01-01

In scientific circles, the reference is the information that is necessary to the reader in identifying and finding used sources. The basic rule when listing the sources used is that references must be accurate, complete and should be consistently applied. On the other hand, quoting implies verbatim written or verbal repetition of parts of the text or words written by others that can be checked in original. Authors of every new scientific article need to explain how their study or research fits with previous one in the same or similar fields. A typical article in the health sciences refers to approximately 20-30 other articles published in peer reviewed journals, cite once or hundreds times. Citations typically appear in two formats: a) as in-text citations where the sources of information are briefly identified in the text; or b) in the reference list at the end of the publication (book chapter, manuscript, article, etc.) that provides full bibliographic information for each source. Group of publishers met in Vancouver in 1978 and decided to prescribe uniform technical propositions for publication. Adopted in the 1979 by the National Library of Medicine in Bethesda, then the International Committee of Medical Journals Editors (ICMJE), whose review in 1982 entered the official application by 300 international biomedical journals. Authors writing articles for publication in biomedical publications used predominantly citation styles: Vancouver style, Harward style, PubMed style, ICMJE, APA, etc. The paper gives examples of all of these styles of citation to the authors in order to facilitate their applications. Also in this paper is given the review about the problem of plagiarism which becomes more common in the writing of scientific and technical articles in biomedicine.

U.S. Geological Survey Toxic Substances Hydrology Program: Proceedings of the technical meeting, Charleston, South Carolina, March 8-12, 1999: Volume 1 (Part A)

USGS Publications Warehouse

Morganwalp, David W.; Buxton, Herbert T.

1999-01-01

This report contains papers presented at the seventh Technical Meeting of the U.S. Geological Survey (USGS), Toxic Substances Hydrology (Toxics) Program. The meeting was held March 8-12, 1999, in Charleston, South Carolina. Toxics Program Technical Meetings are held periodically to provide a forum for presentation and discussion of results of recent research activities.The objectives of these meetings are to:Present recent research results to essential stakeholders,Encourage synthesis and integrated interpretations among scientists with different expertise who are working on a contamination issue, andPromote exchange of ideas among scientists working on different projects and issues within the Toxics Program.The Proceedings is published in three volumes. Volume 1 contains papers that report on results of research on contamination from hard-rock mining. Results include research on contamination from hard rock mining in arid southwest alluvial basins, research on hard rock mining in mountainous terrain, and progress from the USGS Abandoned Mine Lands Initiative. This Initiative is designed to develop a watershed-based approach to characterize and remediate contamination from abandoned mine lands and transfer technologies to Federal land management agencies and stakeholders.Volume 2 contains papers on contamination of hydrologic systems and related ecosystems. The papers discuss research on the response of estuarine ecosystems to contamination from human activities. They include research on San Francisco Bay; mercury contamination of aquatic ecosystems; and investigation of the occurrence, distribution, and fate of agricultural chemicals in the Mississippi River Basin. This volume also contains results on development and reconnaissance testing of new methods to detect emerging contaminants in environmental samples.Volume 3 contains papers on subsurface contamination from point sources. The papers discuss research on: hydrocarbons and fuel oxygenates at gasoline release sites; ground-water contamination by crude oil; complex contaminant mixtures from treated wastewater discharges; waste disposal and subsurface transport of contaminants in arid environments; ground water and surface water affected by municipal landfill leachate; natural attenuation of chlorinated solvents; and characterizing flow and transport in fractured rock aquifers.In all, the more than 175 papers contained in this proceedings reflect the contributions of more than 350 scientists who are co-authors. These scientists are from across the USGS, as well as from universities, other Federal and State agencies, and industry.

U.S. Geological Survey Toxic Substances Hydrology Program: Proceedings of the technical meeting, Charleston, South Carolina, March 8-12, 1999: Volume 3 (Part C)

USGS Publications Warehouse

Morganwalp, David W.; Buxton, Herbert T.

1999-01-01

This report contains papers presented at the seventh Technical Meeting of the U.S. Geological Survey (USGS), Toxic Substances Hydrology (Toxics) Program. The meeting was held March 8-12, 1999, in Charleston, South Carolina. Toxics Program Technical Meetings are held periodically to provide a forum for presentation and discussion of results of recent research activities.The objectives of these meetings are to:Present recent research results to essential stakeholders,Encourage synthesis and integrated interpretations among scientists with different expertise who are working on a contamination issue, andPromote exchange of ideas among scientists working on different projects and issues within the Toxics Program.The Proceedings is published in three volumes. Volume 1 contains papers that report on results of research on contamination from hard-rock mining. Results include research on contamination from hard rock mining in arid southwest alluvial basins, research on hard rock mining in mountainous terrain, and progress from the USGS Abandoned Mine Lands Initiative. This Initiative is designed to develop a watershed-based approach to characterize and remediate contamination from abandoned mine lands and transfer technologies to Federal land management agencies and stakeholders.Volume 2 contains papers on contamination of hydrologic systems and related ecosystems. The papers discuss research on the response of estuarine ecosystems to contamination from human activities. They include research on San Francisco Bay; mercury contamination of aquatic ecosystems; and investigation of the occurrence, distribution, and fate of agricultural chemicals in the Mississippi River Basin. This volume also contains results on development and reconnaissance testing of new methods to detect emerging contaminants in environmental samples.Volume 3 contains papers on subsurface contamination from point sources. The papers discuss research on: hydrocarbons and fuel oxygenates at gasoline release sites; ground-water contamination by crude oil; complex contaminant mixtures from treated wastewater discharges; waste disposal and subsurface transport of contaminants in arid environments; ground water and surface water affected by municipal landfill leachate; natural attenuation of chlorinated solvents; and characterizing flow and transport in fractured rock aquifers.In all, the more than 175 papers contained in this proceedings reflect the contributions of more than 350 scientists who are co-authors. These scientists are from across the USGS, as well as from universities, other Federal and State agencies, and industry.

U.S. Geological Survey Toxic Substances Hydrology Program: Proceedings of the technical meeting, Charleston, South Carolina, March 8-12, 1999: Volume 2 (Part B)

USGS Publications Warehouse

Morganwalp, David W.; Buxton, Herbert T.

1999-01-01

This report contains papers presented at the seventh Technical Meeting of the U.S. Geological Survey (USGS), Toxic Substances Hydrology (Toxics) Program. The meeting was held March 8-12, 1999, in Charleston, South Carolina. Toxics Program Technical Meetings are held periodically to provide a forum for presentation and discussion of results of recent research activities.The objectives of these meetings are to:Present recent research results to essential stakeholders,Encourage synthesis and integrated interpretations among scientists with different expertise who are working on a contamination issue, andPromote exchange of ideas among scientists working on different projects and issues within the Toxics Program.The Proceedings is published in three volumes. Volume 1 contains papers that report on results of research on contamination from hard-rock mining. Results include research on contamination from hard rock mining in arid southwest alluvial basins, research on hard rock mining in mountainous terrain, and progress from the USGS Abandoned Mine Lands Initiative. This Initiative is designed to develop a watershed-based approach to characterize and remediate contamination from abandoned mine lands and transfer technologies to Federal land management agencies and stakeholders.Volume 2 contains papers on contamination of hydrologic systems and related ecosystems. The papers discuss research on the response of estuarine ecosystems to contamination from human activities. They include research on San Francisco Bay; mercury contamination of aquatic ecosystems; and investigation of the occurrence, distribution, and fate of agricultural chemicals in the Mississippi River Basin. This volume also contains results on development and reconnaissance testing of new methods to detect emerging contaminants in environmental samples.Volume 3 contains papers on subsurface contamination from point sources. The papers discuss research on: hydrocarbons and fuel oxygenates at gasoline release sites; ground-water contamination by crude oil; complex contaminant mixtures from treated wastewater discharges; waste disposal and subsurface transport of contaminants in arid environments; ground water and surface water affected by municipal landfill leachate; natural attenuation of chlorinated solvents; and characterizing flow and transport in fractured rock aquifers.In all, the more than 175 papers contained in this proceedings reflect the contributions of more than 350 scientists who are co-authors. These scientists are from across the USGS, as well as from universities, other Federal and State agencies, and industry.

Publishing on the WWW. Part 1 - Static graphics

PubMed Central

Grech, V

2000-01-01

An on-line journal's ability to publish graphics at no additional cost is a major advantage over conventional printed journals. This article outlines technical, copyright and other issues related to graphic publishing on the world-wide-web. PMID:22368588

Technical Education in Nigeria: The Way Forward. Summary of Proceedings of the Workshop on Technical Education: A Foundation for a Healthy Economy (Ota, Ogun State of Nigeria, March 1-2, 1994).

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

This summary of proceedings includes papers from and about a workshop on technical education in Nigeria and the lessons Nigeria may gain by examining the vocational and technical education systems of Germany, the United States, Great Britain, and Japan. The following papers are included: "Foreword" (Iyorchia Ayu); "Introduction: A…

Treatment of Race/Ethnicity in Career-Technical Education Research

ERIC Educational Resources Information Center

Rojewski, Jay W.; Xing, Xue

2013-01-01

This study examined how researchers of career-technical education have treated the construct of race/ethnicity in recent studies. Fifty-one of 71 articles published in the Career and Technical Education Research (CTER) over a 7-year span (2005-2011) were included. A content analysis found that only one quarter (n = 13, 25.49%) of eligible studies…

Technical Communication: Abstracts of Doctoral Dissertations Published in "Dissertation Abstracts International," January 1975 through December 1983 (Vols. 37 through 44).

ERIC Educational Resources Information Center

Murdock, Phil, Comp.

Compiled from responses to a survey of 36 universities offering doctorates in rhetoric, composition, language, or technical communication, and updated using research and dissertation indexes and bibliographies, this bibliography summarizes doctoral research in technical communication since 1975. The 35 titles deal with a variety of topics,…

Quality Concerns in Technical Education in India: A Quantifiable Quality Enabled Model

ERIC Educational Resources Information Center

Gambhir, Victor; Wadhwa, N. C.; Grover, Sandeep

2016-01-01

Purpose: The paper aims to discuss current Technical Education scenarios in India. It proposes modelling the factors affecting quality in a technical institute and then applying a suitable technique for assessment, comparison and ranking. Design/methodology/approach: The paper chose graph theoretic approach for quantification of quality-enabled…

In Situ Airborne Instrumentation: Addressing and Solving Measurement Problems in Ice Clouds

DOE PAGES

Baumgardner, Darrel; Kok, Greg; Avallone, L.; ...

2012-02-01

A meeting of 31 international experts on in situ measurements from aircraft was held to identify unresolved questions concerning ice formation and evolution in ice clouds, assess the current state of instrumentation that can address these problems, introduce emerging technology that may overcome current measurement issues and recommend future courses of action that can improve our understanding of ice cloud microphysical processes and their impact on the environment. The meeting proceedings and outcome has been described in detail in a manuscript submitted to the Bulletin of the American Meteorological Society (BAMS) on March 24, 2011. This paper is currently undermore » review. The remainder of this summary, in the following pages, is the text of the BAMS article. A technical note that will be published by the National Center for Atmospheric Research is currently underway and is expected to be published before the end of the year.« less

Space Sciences Laboratory Publications and Presentations: January 1 - December 31,1998

NASA Technical Reports Server (NTRS)

Summers, F. G. (Compiler)

1999-01-01

This document lists the significant publications and presentations of the Space Sciences Laboratory during the period January 1 - December 31, 1998. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publication in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature. Questions or requests for additional information about the entries in this report should be directed to Gregory S. Wilson (ES01; 544-7579) or to one of the authors. The organizational code of the cognizant SSL branch or office is given at the end of each entry.

Success criteria for electronic medical record implementations in low-resource settings: a systematic review.

PubMed

Fritz, Fleur; Tilahun, Binyam; Dugas, Martin

2015-03-01

Electronic medical record (EMR) systems have the potential of supporting clinical work by providing the right information at the right time to the right people and thus make efficient use of resources. This is especially important in low-resource settings where reliable data are also needed to support public health and local supporting organizations. In this systematic literature review, our objectives are to identify and collect literature about success criteria of EMR implementations in low-resource settings and to summarize them into recommendations. Our search strategy relied on PubMed queries and manual bibliography reviews. Studies were included if EMR implementations in low-resource settings were described. The extracted success criteria and measurements were summarized into 7 categories: ethical, financial, functionality, organizational, political, technical, and training. We collected 381 success criteria with 229 measurements from 47 articles out of 223 articles. Most papers were evaluations or lessons learned from African countries, published from 1999 to 2013. Almost half of the EMR systems served a specific disease area like human immunodeficiency virus (HIV). The majority of criteria that were reported dealt with the functionality, followed by organizational issues, and technical infrastructures. Sufficient training and skilled personnel were mentioned in roughly 10%. Political, ethical, and financial considerations did not play a predominant role. More evaluations based on reliable frameworks are needed. Highly reliable data handling methods, human resources and effective project management, as well as technical architecture and infrastructure are all key factors for successful EMR implementation. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Applying human rights to maternal health: UN Technical Guidance on rights-based approaches.

PubMed

Yamin, Alicia Ely

2013-05-01

In the last few years there have been several critical milestones in acknowledging the centrality of human rights to sustainably addressing the scourge of maternal death and morbidity around the world, including from the United Nations Human Rights Council. In 2012, the Council adopted a resolution welcoming a Technical Guidance on rights-based approaches to maternal mortality and morbidity, and calling for a report on its implementation in 2 years. The present paper provides an overview of the contents and significance of the Guidance. It reviews how the Guidance can assist policymakers in improving women's health and their enjoyment of rights by setting out the implications of adopting a human rights-based approach at each step of the policy cycle, from planning and budgeting, to ensuring implementation, to monitoring and evaluation, to fostering accountability mechanisms. The Guidance should also prove useful to clinicians in understanding rights frameworks as applied to maternal health. Copyright © 2013 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Distilling reliable remedies: Hieronymus Brunschwig's Liber de arte distillandi (1500) between alchemical learning and craft practice.

PubMed

Taape, Tillmann

2014-08-01

Hieronymus Brunschwig's Liber de arte distillandi, written in German and first published in Strasbourg in 1500, was the first printed manual on the distillation of medicinal waters. Although influential among early modern audiences and well known to modern scholars, its intriguing blend of intellectual and practical traditions has thus far received little attention. This paper identifies these strands in Brunschwig's technical instructions and shows how they intertwine in the production of reliable remedies. Exploring the intellectual dimension of Brunschwig's work, I argue that his concept of distillation is shaped by an alchemical understanding of matter, especially by the writings on 'quintessence' of the fourteenth-century alchemist John of Rupescissa. To realise this concept in the workshop, Brunschwig emphasises the central importance of the body and its senses to ensure true craftsmanship. Brunschwig's printed manual was as much a product of skilled artisanal practices as the distilled waters it describes, and I argue that it was shaped by the same concerns about technical precision and reliability.

Analysis of factors determining enterprise value of company merger and acquisition: A case study of coal in Kalimantan, Indonesia

NASA Astrophysics Data System (ADS)

Candra, Ade; Pasasa, Linus A.; Simatupang, Parhimpunan

2015-09-01

The main purpose of this paper is looking at the relationship between the factors of technical, financial and legal with enterprise value in mergers and acquisitions of coal companies in Kalimantan, Indonesia over the last 10 years. Data obtained from secondary data sources in the company works and from published data on the internet. The data thus obtained are as many as 46 secondary data with parameters resources, reserves, stripping ratio, calorific value, distance from pit to port, and distance from ports to vessels, production per annum, the cost from pit to port, from port to vessel costs, royalties, coal price and permit status. The data was analysis using structural equation modeling (SEM) to determine the factors that most significant influence enterprise value of coal company in Kalimantan. The result shows that a technical matter is the factor that most affects the value of enterprise in coal merger and acquisition company. Financial aspect is the second factor that affects the enterprise value.

Opening Reproducible Research

NASA Astrophysics Data System (ADS)

Nüst, Daniel; Konkol, Markus; Pebesma, Edzer; Kray, Christian; Klötgen, Stephanie; Schutzeichel, Marc; Lorenz, Jörg; Przibytzin, Holger; Kussmann, Dirk

2016-04-01

Open access is not only a form of publishing such that research papers become available to the large public free of charge, it also refers to a trend in science that the act of doing research becomes more open and transparent. When science transforms to open access we not only mean access to papers, research data being collected, or data being generated, but also access to the data used and the procedures carried out in the research paper. Increasingly, scientific results are generated by numerical manipulation of data that were already collected, and may involve simulation experiments that are completely carried out computationally. Reproducibility of research findings, the ability to repeat experimental procedures and confirm previously found results, is at the heart of the scientific method (Pebesma, Nüst and Bivand, 2012). As opposed to the collection of experimental data in labs or nature, computational experiments lend themselves very well for reproduction. Some of the reasons why scientists do not publish data and computational procedures that allow reproduction will be hard to change, e.g. privacy concerns in the data, fear for embarrassment or of losing a competitive advantage. Others reasons however involve technical aspects, and include the lack of standard procedures to publish such information and the lack of benefits after publishing them. We aim to resolve these two technical aspects. We propose a system that supports the evolution of scientific publications from static papers into dynamic, executable research documents. The DFG-funded experimental project Opening Reproducible Research (ORR) aims for the main aspects of open access, by improving the exchange of, by facilitating productive access to, and by simplifying reuse of research results that are published over the Internet. Central to the project is a new form for creating and providing research results, the executable research compendium (ERC), which not only enables third parties to reproduce the original research and hence recreate the original research results (figures, tables), but also facilitates interaction with them as well as their recombination with new data or methods. Building on existing open standards and software, this project develops standards and tools for ERCs, and will demonstrate and evaluate these, focusing on the geosciences domains. The project goes beyond a technical solution for ERCs by evaluating the system from the perspectives of geoscience researchers as participants in a scientific publication process. It will focus on the statistical environment R, but also evaluate larger run time systems captured in virtual environments (Docker containers). ERCs are built upon and integrate well with both established day-to-day workflows of digital research and the scientific publication process. They make research accessible on different levels at any stage to anyone via open web platforms. Other scientists can transfer a compendium of software and tools to their own local environment and collaborate, while others make minimal changes and compare changed results in a web browser. Building on recent advances in mainstream IT, ORR envisions a new architecture for storing, executing and interacting with the original analysis environment alongside the corresponding research data and text. ORR bridges the gap between long-term archives, practical geoscience researchers, as well as publication media. Consequently, the project team seeks input and feedback from researchers working with geospatial data to ensure usable and useful open access publications as well as a publication process that minimizes effort while maximizing usability and re-usability. {References} Pebesma, E., D. Nüst, R. Bivand, 2012. The R software environment in reproducible geoscientific research. Eos, Transactions American Geophysical Union 93, vol 16, p. http://dx.doi.org/10.1029/2012EO160003{163-164}. Opening Reproducible Research project description and website: https://www.uni-muenster.de/forschungaz/project/9520?lang=en

77 FR 26660 - Guidelines for the Transfer of Excess Computers or Other Technical Equipment Pursuant to Section...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-07

....usda.gov . SUPPLEMENTARY INFORMATION: A. Background A proposed rule was published in the Federal.... Computers or other technical equipment means central processing units, laptops, desktops, computer mouses...

Space Sciences Laboratory Publications and Presentations: January 1 - December 31, 1996

NASA Technical Reports Server (NTRS)

Summers, F. G. (Compiler)

1997-01-01

This document lists the significant publications and presentations of the Space Sciences Laboratory during the period January 1 - December 31, 1996. Entries in the main part of the document are categorized according to NASA Reports (arranged by report number), Open Literature, and Presentations (arranged alphabetically by title). Also included for completeness is an Appendix (arranged by page number) listing preprints issued by the Laboratory during this reporting period. Some of the preprints have not been published; those already published are so indicated. Most of the articles listed under Open Literature have appeared in refereed professional journals, books, monographs, or conference proceedings. Although many published abstracts are eventually expanded into full papers for publications in scientific and technical journals, they are often sufficiently comprehensive to include the significant results of the research reported. Therefore, published abstracts are listed separately in a subsection under Open Literature. Questions or requests for additional information about the entries in this report should be directed to Gregory S. Wilson (ESO1; 544-7579) or to one of the authors. The organizational code of the cognizant SSL branch or office is given at the end of each entry.

High-accuracy contouring using projection moiré

NASA Astrophysics Data System (ADS)

Sciammarella, Cesar A.; Lamberti, Luciano; Sciammarella, Federico M.

2005-09-01

Shadow and projection moiré are the oldest forms of moiré to be used in actual technical applications. In spite of this fact and the extensive number of papers that have been published on this topic, the use of shadow moiré as an accurate tool that can compete with alternative devices poses very many problems that go to the very essence of the mathematical models used to obtain contour information from fringe pattern data. In this paper some recent developments on the projection moiré method are presented. Comparisons between the results obtained with the projection method and the results obtained by mechanical devices that operate with contact probes are presented. These results show that the use of projection moiré makes it possible to achieve the same accuracy that current mechanical touch probe devices can provide.

Materials And Processes Technical Information System (MAPTIS) LDEF materials database

NASA Technical Reports Server (NTRS)

Davis, John M.; Strickland, John W.

1992-01-01

The Materials and Processes Technical Information System (MAPTIS) is a collection of materials data which was computerized and is available to engineers in the aerospace community involved in the design and development of spacecraft and related hardware. Consisting of various database segments, MAPTIS provides the user with information such as material properties, test data derived from tests specifically conducted for qualification of materials for use in space, verification and control, project management, material information, and various administrative requirements. A recent addition to the project management segment consists of materials data derived from the LDEF flight. This tremendous quantity of data consists of both pre-flight and post-flight data in such diverse areas as optical/thermal, mechanical and electrical properties, atomic concentration surface analysis data, as well as general data such as sample placement on the satellite, A-O flux, equivalent sun hours, etc. Each data point is referenced to the primary investigator(s) and the published paper from which the data was taken. The MAPTIS system is envisioned to become the central location for all LDEF materials data. This paper consists of multiple parts, comprising a general overview of the MAPTIS System and the types of data contained within, and the specific LDEF data element and the data contained in that segment.

Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Loveland, Walter David

2016-08-27

This report describes the research carried out under this grant for the period from 1997 to 2014. This work has been previously described in annual progress reports and renewal applications. As a result of this project, ~100 papers were published in open refereed journals and 107 invited talks were given by the PI. The research subjects covered by this project included the synthesis and characterization of super-heavy nuclei, the critical study of the reaction mechanisms used in these synthesis reactions, the mechanism(s) of intermediate energy and relativistic nuclear collisions, the study of reactions induced by radioactive nuclear beams, and generalmore » properties of the heaviest elements.« less

Supercritical fluid chromatography: a promising alternative to current bioanalytical techniques.

PubMed

Dispas, Amandine; Jambo, Hugues; André, Sébastien; Tyteca, Eva; Hubert, Philippe

2018-01-01

During the last years, chemistry was involved in the worldwide effort toward environmental problems leading to the birth of green chemistry. In this context, green analytical tools were developed as modern Supercritical Fluid Chromatography in the field of separative techniques. This chromatographic technique knew resurgence a few years ago, thanks to its high efficiency, fastness and robustness of new generation equipment. These advantages and its easy hyphenation to MS fulfill the requirements of bioanalysis regarding separation capacity and high throughput. In the present paper, the technical aspects focused on bioanalysis specifications will be detailed followed by a critical review of bioanalytical supercritical fluid chromatography methods published in the literature.

[International bibliographic databases--Current Contents on disk and in FTP format (Internet): presentation and guide].

PubMed

Bloch-Mouillet, E

1999-01-01

This paper aims to provide technical and practical advice about finding references using Current Contents on disk (Macintosh or PC) or via the Internet (FTP). Seven editions are published each week. They are all organized in the same way and have the same search engine. The Life Sciences edition, extensively used in medical research, is presented here in detail, as an example. This methodological note explains, in French, how to use this reference database. It is designed to be a practical guide for browsing and searching the database, and particularly for creating search profiles adapted to the needs of researchers.

Towards an Understanding of Atmospheric Balance

NASA Technical Reports Server (NTRS)

Errico, Ronald M.

2015-01-01

During a 35 year period I published 30+ pear-reviewed papers and technical reports concerning, in part or whole, the topic of atmospheric balance. Most used normal modes, either implicitly or explicitly, as the appropriate diagnostic tool. This included examination of nonlinear balance in several different global and regional models using a variety of novel metrics as well as development of nonlinear normal mode initialization schemes for particular global and regional models. Recent studies also included the use of adjoint models and OSSEs to answer some questions regarding balance. lwill summarize what I learned through those many works, but also present what l see as remaining issues to be considered or investigated.

The National Shipbuilding Research Program. Proceedings of the REAPS Technical Symposium. Paper No. 20: Application of the GIFTS-5 Minibased Graphics System for Ship Design and Analysis

DTIC Science & Technology

1979-09-01

Proceedings of the REAPS Technical Symposium Paper No. 20: Application of the GIFTS -5 Minibased Graphics System for Ship Design and Analysis U.S...The National Shipbuilding Research Program Proceedings of the REAPS Technical Symposium Paper No. 20: Application of the GIFTS -5 Minibased Graphics...MERCHANTABILITY AND/OR FITNESS FOR PURPOSE ARE SPECIFICALLY DISCLAIMED. APPLICATION OF THE GIFTS -5 MINIBASED GRAPHICS SYSTEM FOR SHIP DESIGN AND ANALYSIS Dr

Are We "There" Yet? the Treatment of Gender and Feminism in Technical, Business, and Workplace Writing Studies

ERIC Educational Resources Information Center

White, Kate; Rumsey, Suzanne Kesler; Amidon, Stevens

2016-01-01

This article reexamines the treatment of gender and feminism in technical, business, and workplace writing studies--areas in which the three of us teach. Surprisingly, the published discourse of our field seems to implicitly minimize the gendered nature of business and technical writing workplaces and classrooms. To understand this apparent lack…

Technical Support Document for Title V Permitting of Printing Facilities

EPA Pesticide Factsheets

Stationary source emissions monitoring is required to demonstrate that a source is meeting the requirements in Federal or state rules, including Title V. This document provides the technical support for compliance in the printing and publishing industry.

TECHNICAL RESOURCE DOCUMENT ON MONITORED NATURAL RECOVERY

EPA Science Inventory

In 2005, the United States Environmental Protection Agency (EPA) published a document entitled Contaminated Sediment Remediation Guidance for Hazardous Waste Sites (EPA, 2005), which provides technical and policy guidance for project managers and teams making risk manageme...

[On-line journals--are they the future? ].

PubMed

Geges, József; Vasas, Lívia

2007-01-21

The significant growth of the online literature usage, and the conspicuously differing interest of publishers, procurers and users raise the question whether the electronic or the paper journals will be the primary information sources in the future. The price of the scientific literature has gotten out of control in the last two decades. At the same time websites showed up providing open access, and this may make all participants of the market to change their marketing policy. Instead of the extra-profit accumulation strategy, publishers should take individual users' interests into consideration. Although the technical conditions of value-added option-enriched online services to surpass the paper journals are given already, there is still a demand for the latter, due to ingrained user habits. At the same time, the electronic version is attracting the users with e-versions, three-dimensional images, video records, sound, hypertext, content and relation analysis, which are limited only by the imagination. According to the authors, the development of information media is unstoppable, and the main challenge in the future will be still to find the most effective way of processing information, make it available for professional research and preserve it for the scientific heritage.

Downsides of robot-assisted laparoscopic radical prostatectomy: limitations and complications.

PubMed

Murphy, Declan G; Bjartell, Anders; Ficarra, Vincenzo; Graefen, Markus; Haese, Alexander; Montironi, Rodolfo; Montorsi, Francesco; Moul, Judd W; Novara, Giacomo; Sauter, Guido; Sulser, Tullio; van der Poel, Henk

2010-05-01

Robot-assisted laparoscopic radical prostatectomy (RALP) using the da Vinci Surgical System (Intuitive Surgical, Sunnyvale, CA, USA) is now in widespread use for the management of localised prostate cancer (PCa). Many reports of the safety and efficacy of this procedure have been published. However, there are few specific reports of the limitations and complications of RALP. The primary purpose of this review is to ascertain the downsides of RALP by focusing on complications and limitations of this approach. A Medline search of the English-language literature was performed to identify all papers published since 2001 relating to RALP. Papers providing data on technical failures, complications, learning curve, or other downsides of RALP were considered. Of 412 papers identified, 68 were selected for review based on their relevance to the objective of this paper. RALP has the following principal downsides: (1) device failure occurs in 0.2-0.4% of cases; (2) assessment of functional outcome is unsatisfactory because of nonstandardised assessment techniques; (3) overall complication rates of RALP are low, although higher rates are noted when complications are reported using a standardised system; (4) long-term oncologic data and data on high-risk PCa are limited; (5) a steep learning curve exists, and although acceptable operative times can be achieved in <20 cases, positive surgical margin (PSM) rates may require experience with >80 cases before a plateau is achieved; (6) robotic assistance does not reduce the difficulty associated with obese patients and those with large prostates, middle lobes, or previous surgery, in whom outcomes are less satisfactory than in patients without such factors; (7) economic barriers prevent uniform dissemination of robotic technology. Many of the downsides of RALP identified in this paper can be addressed with longer-term data and more widespread adoption of standardised reporting measures. The significant learning curve should not be understated, and the expense of this technology continues to restrict access for many patients. Copyright © 2009 European Association of Urology. Published by Elsevier B.V. All rights reserved.

Proceedings of the Annual Meeting of the Council for Programs in Technical and Scientific Communication (14th, Orlando, Florida, October 7-9, 1987).

ERIC Educational Resources Information Center

Geonetta, Sam C., Ed.

Based on the notion of "reaching out," this proceedings presents papers from the annual meeting of the Council for Programs in Technical and Scientific Communication. Papers in the proceedings are: "Southern Tech's Technical Writing Certificate" (William S. Pfeiffer); "Reach Out and Quack Someone" (Daniel R. Jones);…

The Sixth Alumni Conference of the International Space University

NASA Technical Reports Server (NTRS)

Berry, Steve (Editor)

1997-01-01

These proceedings cover the sixth alumni conference of the International Space University, coordinated by the ISU U.S. Alumni Organization, which was held at Rice University in Houston, Texas, on July 11, 1997. The alumni conference gives graduates of the International Space University's interdisciplinary, international, and intercultural program a forum in which they may present and exchange technical ideas, and keep abreast of the wide variety of work in which the ever-growing body of alumni is engaged. The diversity that is characteristic of ISU is reflected in the subject matter of the papers published in this proceedings. This proceedings preserves the order of the alumni presentations given at the 1997 ISU Alumni Conference. As in previous years, a special effort was made to solicit papers with a strong connection to the two ISU 1997 Summer Session Program design projects: (1) Transfer of Technology, Spin-Offs, Spin-Ins; and (2) Strategies for the Exploration of Mars. Papers in the remaining ten sessions cover the departmental areas traditional to the ISU summer session program.

The GOME-2 instrument on the Metop series of satellites: instrument design, calibration, and level 1 data processing - an overview

NASA Astrophysics Data System (ADS)

Munro, Rosemary; Lang, Rüdiger; Klaes, Dieter; Poli, Gabriele; Retscher, Christian; Lindstrot, Rasmus; Huckle, Roger; Lacan, Antoine; Grzegorski, Michael; Holdak, Andriy; Kokhanovsky, Alexander; Livschitz, Jakob; Eisinger, Michael

2016-03-01

The Global Ozone Monitoring Experiment-2 (GOME-2) flies on the Metop series of satellites, the space component of the EUMETSAT Polar System. In this paper we will provide an overview of the instrument design, the on-ground calibration and characterization activities, in-flight calibration, and level 0 to 1 data processing. The current status of the level 1 data is presented and points of specific relevance to users are highlighted. Long-term level 1 data consistency is also discussed and plans for future work are outlined. The information contained in this paper summarizes a large number of technical reports and related documents containing information that is not currently available in the published literature. These reports and documents are however made available on the EUMETSAT web pages and readers requiring more details than can be provided in this overview paper will find appropriate references at relevant points in the text.

The GOME-2 instrument on the Metop series of satellites: instrument design, calibration, and level 1 data processing - an overview

NASA Astrophysics Data System (ADS)

Munro, R.; Lang, R.; Klaes, D.; Poli, G.; Retscher, C.; Lindstrot, R.; Huckle, R.; Lacan, A.; Grzegorski, M.; Holdak, A.; Kokhanovsky, A.; Livschitz, J.; Eisinger, M.

2015-08-01

The Global Ozone Monitoring Experiment-2 (GOME-2) flies on the Metop series of satellites, the space component of the EUMETSAT Polar System. In this paper we will provide an overview of the instrument design, the on-ground calibration and characterisation activities, in-flight calibration, and level 0 to 1 data processing. The quality of the level 1 data is presented and points of specific relevance to users are highlighted. Long-term level 1 data consistency is also discussed and plans for future work are outlined. The information contained in this paper summarises a large number of technical reports and related documents containing information that is not currently available in the published literature. These reports and documents are however made available on the EUMETSAT web pages (http://www.eumetsat.int) and readers requiring more details than can be provided in this overview paper will find appropriate references at relevant points in the text.

Application of ion implantation in tooling industry

NASA Astrophysics Data System (ADS)

Straede, Christen A.

1996-06-01

In papers published during the last half of the 1980s it is often stated that the application of ion beams to non-semiconductor purposes seems ready for full-scale industrial exploitation. However, progress with respect to commercialisation of ion implantation has been slower than predicted, although the process is quite clearly building up niche markets, especially in the tooling industry. It is the main purpose of this paper to discuss the implementation of the process in the tooling market, and to describe strategies used to ensure its success. The basic idea has been to find niches where ion implantation out-performs other processes both technically and in prices. For instance, it has been clearly realised that one should avoid competing with physical vapour deposition or other coating techniques in market areas where they perform excellently, and instead find niches where the advantages of the ion implantation technique can be fully utilised. The paper will present typical case stories in order to illustrate market niches where the technique has its greatest successes and potential.

Physically Healthy and Ready to Learn. Technical Assistance Paper No. 1

ERIC Educational Resources Information Center

US Department of Health and Human Services, Head Start Bureau, 2006

2006-01-01

This Technical Assistance Paper offers guidance to programs regarding the implementation of the "Head Start Program Performance Standards" on child health and developmental services, child health and safety, and child nutrition. The paper examines how physical health influences children's development and how child health and development…

Second chronological supplement to the Carcinogenic Potency Database: standardized results of animal bioassays published through December 1984 and by the National Toxicology Program through May 1986.

PubMed Central

Gold, L S; Slone, T H; Backman, G M; Magaw, R; Da Costa, M; Lopipero, P; Blumenthal, M; Ames, B N

1987-01-01

This paper is the second chronological supplement to the Carcinogenic Potency Database, published earlier in this journal (1,2,4). We report here results of carcinogenesis bioassays published in the general literature between January 1983 and December 1984, and in Technical Reports of the National Cancer Institute/National Toxicology Program between January 1983 and May 1986. This supplement includes results of 525 long-term, chronic experiments of 199 test compounds, and reports the same information about each experiment in the same plot format as the earlier papers: e.g., the species and strain of test animal, the route and duration of compound administration, dose level and other aspects of experimental protocol, histopathology and tumor incidence, TD50 (carcinogenic potency) and its statistical significance, dose response, author's opinion about carcinogenicity, and literature citation. We refer the reader to the 1984 publications for a description of the numerical index of carcinogenic potency (TD50), a guide to the plot of the database, and a discussion of the sources of data, the rationale for the inclusion of particular experiments and particular target sites, and the conventions adopted in summarizing the literature. The three plots of the database are to be used together, since results of experiments published in earlier plots are not repeated. Taken together, the three plots include results for more than 3500 experiments on 975 chemicals. Appendix 14 is an index to all chemicals in the database and indicates which plot(s) each chemical appears in. PMID:3691431

International Symposium on Advanced Materials (ISAM 2013)

NASA Astrophysics Data System (ADS)

2014-06-01

This proceeding is a compilation of peer reviewed papers presented at the 13th International Symposium on Advanced Materials (ISAM 2013) held from September 23-27, 2013, at Islamabad, Pakistan. In my capacity as ISAM-2013 Secretary, I feel honoured that the symposium has ended on a positive note. The ever increasing changes and intricacies that characterize modern industry necessitate a growing demand for technical information on advanced materials. ISAM and other similar forums serve to fulfill this need. The five day deliberations of ISAM 2013, consisted of 19 technical sessions and 2 poster sessions. In all, 277 papers were presented, inclusive of 80 contributory, invited and oral presentations. The symposium also hosted panel discussions led by renowned scientists and eminent researchers from foreign as well as local institutes. The ultimate aim of this proceeding is to record in writing the new findings in the field of advanced materials. I hope that the technical data available in this publication proves valuable to young scientists and researchers working in this area of science. At the same time, I wish to acknowledge Institute of Physics (IOP) Publishing UK, for accepting the research papers from ISAM-2013 for publication in the IOP Conference Series: Materials Science and Engineering. The proceeding will be available on the IOP website as an online open access document. I am profoundly thankful to the Symposium Chairman for his steadfast support and valuable guidance without which ISAM 2013 could not have been the mega event that it turned out to be. My gratitude to all our distinguished participants, session chairs/co-chairs, and reviewers for their active role in the symposium. I appreciate the entire organizing committee for the zest and ardor with which each committee fulfilled its obligations to ISAM. Last yet not the least, my thankfulness goes to all our sponsors for wilfully financing the event. Dr. Sara Qaisar Symposium Secretary Further conference information, including information on the organizing committee and conferene sponsors, is available in the pdf.

Issues in Electronic Publishing.

ERIC Educational Resources Information Center

Meadow, Charles T.

1997-01-01

Discusses issues related to electronic publishing. Topics include writing; reading; production, distribution, and commerce; copyright and ownership of intellectual property; archival storage; technical obsolescence; control of content; equality of access; and cultural changes. (Author/LRW)

[Mapping of information on worker's health].

PubMed

Guimarães, Raul Borges; Ribeiro, Helena

2010-12-01

Geographic studies and spatial analyses have been recognized in Brazilian public health papers. It is still, however, very little explored by researchers. In a survey of the leading scientific journals covering issues related to Brazilian worker's health, we found the predominant use of charts and tables as a way to organize and present results with a small number of maps. This survey was conducted by examining all papers published in four journals, covering the period from 1967 to 2009 (Revista de Saúde Pública, Cadernos de Saúde Pública, Revista Saúde e Sociedade, and Revista Brasileira de Epidemiologia). After analyzing the set of papers selected for the study, the papers that used maps were given special attention. The tools of geoprocessing and geostatistics with GIS support, although little used, open new possibilities to use thematic cartography in the field of workers' health. However, it is recommended that editors of scientific journals have detailed technical standards as well as specific reports for the publication of cartographic figures aimed at facilitating the modifications necessary for the improvement of the visual quality of maps and of the spatial correlations through cartography.

Owning the program technical baseline for future space systems acquisition: program technical baseline tracking tool

NASA Astrophysics Data System (ADS)

Nguyen, Tien M.; Guillen, Andy T.; Hant, James J.; Kizer, Justin R.; Min, Inki A.; Siedlak, Dennis J. L.; Yoh, James

2017-05-01

The U.S. Air Force (USAF) has recognized the needs for owning the program and technical knowledge within the Air Force concerning the systems being acquired to ensure success. This paper extends the previous work done by the authors [1-2] on the "Resilient Program Technical Baseline Framework for Future Space Systems" and "Portfolio Decision Support Tool (PDST)" to the development and implementation of the Program and Technical Baseline (PTB) Tracking Tool (PTBTL) for the DOD acquisition life cycle. The paper describes the "simplified" PTB tracking model with a focus on the preaward phases and discusses how to implement this model in PDST.

Measures needed to strengthen strategic HIV/AIDS prevention programmes in China.

PubMed

Chen, P

2007-01-01

This paper traces the commonly believed three phases of the HIV/AIDs epidemic in China from the early 1980s to the present time and reviews how the Chinese Government and NGOs are dealing with the crisis. Transmission routes for HIV infection in China are thought to be via IDUs, blood plasma donors, sexual contacts and from mother-to-child transmissions. The author examined interventions for HIV/ AIDS prevention tried in other countries that could provide useful lessons learned and discussed how they could be adapted or replicated in China. While recognising the need for the treatment of HIV positive persons and AIDS patients, this paper is limited to suggesting a number of proven strategic interventions to prevent new HIV infections in China among the "general population", adolescents in schools, sex workers and their clients, injecting drug users, and, prevention of mother to child transmission of HIV/AIDS to stem the epidemic. An extensive literature search of articles in published academic journals, published and unpublished documents of international agencies and development NGOs and media reports was conducted for data source to this paper. Internet search engines such as ProQuest, PubMed, Google and Yahoo search engines were used as well as hard copies of reports and internal documents available at the UNFPA Country Technical Services Team's Office in Bangkok tapped for information.

Dr. Robert Goddard

NASA Image and Video Library

2010-01-04

The Goddard Space Flight Center was named in honor of Dr. Robert Goddard, a pioneer in rocket development. Dr. Goddard received patents for a multi-stage rocket and liquid propellants in 1914 and published a paper describing how to reach extreme altitudes six years later. That paper, "A Method of Reaching Extreme Altitudes," detailed methods for raising weather-recording instruments higher than what could be achieved by balloons and explained the mathematical theories of rocket propulsion. The paper, which was published by the Smithsonian Institution, also discussed the possibility of a rocket reaching the moon-a position for which the press ridiculed Goddard. Yet several copies of the report found their way to Europe, and by1927, the German Rocket Society was established, and the German Army began its rocket program in 1931. Goddard, meanwhile, continued his work. By 1926, he had constructed and tested the first rocket using liquid fuel. Goddard's work largely anticipated in technical detail the later German V-2 missiles, including gyroscopic control, steering by means of vanes in the jet stream of the rocket motor, gimbal-steering, power-driven fuel pumps and other devices. NASA Goddard Space Flight Center enables NASA’s mission through four scientific endeavors: Earth Science, Heliophysics, Solar System Exploration, and Astrophysics. Goddard plays a leading role in NASA’s accomplishments by contributing compelling scientific knowledge to advance the Agency’s mission. Follow us on Twitter Join us on Facebook

A Step Beyond Simple Keyword Searches: Services Enabled by a Full Content Digital Journal Archive

NASA Technical Reports Server (NTRS)

Boccippio, Dennis J.

2003-01-01

The problems of managing and searching large archives of scientific journal articles can potentially be addressed through data mining and statistical techniques matured primarily for quantitative scientific data analysis. A journal paper could be represented by a multivariate descriptor, e.g., the occurrence counts of a number key technical terms or phrases (keywords), perhaps derived from a controlled vocabulary ( e . g . , the American Meteorological Society's Glossary of Meteorology) or bootstrapped from the journal archive itself. With this technique, conventional statistical classification tools can be leveraged to address challenges faced by both scientists and professional societies in knowledge management. For example, cluster analyses can be used to find bundles of "most-related" papers, and address the issue of journal bifurcation (when is a new journal necessary, and what topics should it encompass). Similarly, neural networks can be trained to predict the optimal journal (within a society's collection) in which a newly submitted paper should be published. Comparable techniques could enable very powerful end-user tools for journal searches, all premised on the view of a paper as a data point in a multidimensional descriptor space, e.g.: "find papers most similar to the one I am reading", "build a personalized subscription service, based on the content of the papers I am interested in, rather than preselected keywords", "find suitable reviewers, based on the content of their own published works", etc. Such services may represent the next "quantum leap" beyond the rudimentary search interfaces currently provided to end-users, as well as a compelling value-added component needed to bridge the print-to-digital-medium gap, and help stabilize professional societies' revenue stream during the print-to-digital transition.

Reports Bibliography, October 1971

DOT National Transportation Integrated Search

1971-10-01

The reports bibliography published at the Transportation Systems Center provides a substantive listing of scientific technical reports published from July 1970 through October 1971. Reports are arranged in 22 subject fields and are listed by sponsori...

Assessing the performance of maternity care in Europe: a critical exploration of tools and indicators.

PubMed

Escuriet, Ramón; White, Joanna; Beeckman, Katrien; Frith, Lucy; Leon-Larios, Fatima; Loytved, Christine; Luyben, Ans; Sinclair, Marlene; van Teijlingen, Edwin

2015-11-02

This paper critically reviews published tools and indicators currently used to measure maternity care performance within Europe, focusing particularly on whether and how current approaches enable systematic appraisal of processes of minimal (or non-) intervention in support of physiological or "normal birth". The work formed part of COST Actions IS0907: "Childbirth Cultures, Concerns, and Consequences: Creating a dynamic EU framework for optimal maternity care" (2011-2014) and IS1405: Building Intrapartum Research Through Health - an interdisciplinary whole system approach to understanding and contextualising physiological labour and birth (BIRTH) (2014-). The Actions included the sharing of country experiences with the aim of promoting salutogenic approaches to maternity care. A structured literature search was conducted of material published between 2005 and 2013, incorporating research databases, published documents in english in peer-reviewed international journals and indicator databases which measured aspects of health care at a national and pan-national level. Given its emergence from two COST Actions the work, inevitably, focused on Europe, but findings may be relevant to other countries and regions. A total of 388 indicators were identified, as well as seven tools specifically designed for capturing aspects of maternity care. Intrapartum care was the most frequently measured feature, through the application of process and outcome indicators. Postnatal and neonatal care of mother and baby were the least appraised areas. An over-riding focus on the quantification of technical intervention and adverse or undesirable outcomes was identified. Vaginal birth (no instruments) was occasionally cited as an indicator; besides this measurement few of the 388 indicators were found to be assessing non-intervention or "good" or positive outcomes more generally. The tools and indicators identified largely enable measurement of technical interventions and undesirable health (or pathological medical) outcomes. A physiological birth generally necessitates few, or no, interventions, yet most of the indicators presently applied fail to capture (a) this phenomenon, and (b) the relationship between different forms and processes of care, mode of birth and good or positive outcomes. A need was identified for indicators which capture non-intervention, reflecting the reality that most births are low-risk, requiring few, if any, technical medical procedures.

Proceedings of the Annual Meeting of the Council for Programs in Technical and Scientific Communication (24th, Austin, Texas, October 16-18, 1997).

ERIC Educational Resources Information Center

Council for Programs in Technical and Scientific Communication.

Based on the theme of connections in technical and scientific communication, this proceedings presents 47 papers delivered at the 1997 annual meeting of the Council for Programs in Technical and Scientific Communication (CPTSC). Papers in the proceedings are divided into 10 sections: (1) Theoretical Connections; (2) Legal and Ethical Connections;…

Technical change in forest sector models: the global forest products model approach

Treesearch

Joseph Buongiorno; Sushuai Zhu

2015-01-01

Technical change is developing rapidly in some parts of the forest sector, especially in the pulp and paper industry where wood fiber is being substituted by waste paper. In forest sector models, the processing of wood and other input into products is frequently represented by activity analysis (input–output). In this context, technical change translates in changes...

The Council for Programs in Technical and Scientific Communication Proceedings (5th, Troy, New York, April 19-21, 1978).

ERIC Educational Resources Information Center

Carson, David L., Ed.

Prepared by representatives of industry, government, and the educational community, the papers in this collection were drawn from a conference that addressed a variety of issues of interest to the field of technical communication. Specific topics discussed in the papers are as follows: (1) the role of the Society for Technical Communication in…

Technical Papers Presented at the 1971 NAB Engineering Conference. First Edition.

ERIC Educational Resources Information Center

1971

This collection of 25 papers and panels presented at the 1971 Engineering Conference of the National Association of Broadcasters surveys recent technical developments in the field. At least four of these papers are relevant to education. "Everything You Wanted to Know About Cartridge Machines--But Were Afraid to Ask" describes improvements in…

Education and Training of Accountants in Sub-Saharan Anglophone Africa. World Bank Technical Paper Number 305. Africa Technical Department Series.

ERIC Educational Resources Information Center

Johnson, Sonia R.

This paper describes the accounting profession, and the education and training of accountants and accounting technicians in Sub-Saharan Anglophone Africa. The report reviews professional accounting examinations and degrees, education, practical training, and continuing professional education. The paper highlights the weaknesses in accounting…

NASA/Army Rotorcraft Technology. Volume 1: Aerodynamics, and Dynamics and Aeroelasticity

NASA Technical Reports Server (NTRS)

1988-01-01

The Conference Proceedings is a compilation of over 30 technical papers presented at this milestone event which reported on the advances in rotorcraft technical knowledge resulting from NASA, Army, and industry rotorcraft research programs over the last 5 to 10 years. The Conference brought together over 230 government, industry, and allied nation conferees to exchange technical information and hear invited technical papers by prominent NASA, Army, and industry researchers covering technology topics which included: aerodynamics, dynamics and elasticity, propulsion and drive systems, flight dynamics and control, acoustics, systems integration, and research aircraft.

Engineering Forum Issue Paper: Online Hazardous Waste Cleanup Technical Resources

EPA Pesticide Factsheets

This issue paper is intended to give the reader examples of some online technical resources that can assist with hazardous waste cleanups in the Superfund, Resource Conservation and Recovery Act (RCRA), and Brownfields programs.

SeaWiFS technical report series. Volume 6: SeaWiFS technical report series cumulative index: Volumes 1-5

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor)

1992-01-01

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS), which ceased operations in 1986, after an eight year mission. SeaWiFS is expected to be launched in August 1993, on the Sea Star satellite, being built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the NASA/Goddard Space Flight Center (GSFC) has undertaken the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. This documentation, entitled the SeaWiFS Technical Report Series, is in the form of NASA Technical Memoranda Number 104566. All reports published are volumes within the series. This volume serves as a reference, or guidebook, to the previous five volumes and consists of four main sections including an index to key words and phrases, a list of all references cited, and lists of acronyms and symbols used. It is our intention to publish a summary index of this type after every five volumes in the series. This will cover the topics published in all previous editions of the indices, that is, each new index will include all of the information contained in the preceding indices.

The Second Conference on Lunar Bases and Space Activities of the 21st Century, volume 2

NASA Technical Reports Server (NTRS)

Mendell, Wendell W. (Editor); Alred, John W. (Editor); Bell, Larry S. (Editor); Cintala, Mark J. (Editor); Crabb, Thomas M. (Editor); Durrett, Robert H. (Editor); Finney, Ben R. (Editor); Franklin, H. Andrew (Editor); French, James R. (Editor); Greenberg, Joel S. (Editor)

1992-01-01

These 92 papers comprise a peer-reviewed selection of presentations by authors from NASA, the Lunar and Planetary Institute (LPI), industry, and academia at the Second Conference on Lunar Bases and Space Activities of the 21st Century. These papers go into more technical depth than did those published from the first NASA-sponsored symposium on the topic, held in 1984. Session topics included the following: (1) design and operation of transportation systems to, in orbit around, and on the Moon; (2) lunar base site selection; (3) design, architecture, construction, and operation of lunar bases and human habitats; (4) lunar-based scientific research and experimentation in astronomy, exobiology, and lunar geology; (5) recovery and use of lunar resources; (6) environmental and human factors of and life support technology for human presence on the Moon; and (7) program management of human exploration of the Moon and space.

WHO Working Group on Technical Specifications for Manufacture and Evaluation of Yellow Fever Vaccines, Geneva, Switzerland, 13-14 May 2009.

PubMed

Ferguson, Morag; Shin, Jinho; Knezevic, Ivana; Minor, Philip; Barrett, Alan

2010-12-06

In May 2009, WHO convened a meeting of Working Group on Technical Specifications for Manufacturing and Evaluating Yellow Fever (YF) Vaccines, Geneva, Switzerland to initiate revision of the WHO Recommendations (formerly, Requirements) for YF vaccine published in WHO Technical Report Series number 872 (1998). The Working Group, consisting of experts from academia, industry, national regulatory authorities and national control laboratories, reviewed the latest issues of safety, efficacy and quality of YF vaccines and agreed that (i) the revision should focus on live attenuated YF vaccine virus 17D lineage; and that (ii) nonclinical and clinical guidelines for new vaccines prepared from 17D lineage be developed. Copyright © 2010. Published by Elsevier Ltd.. All rights reserved.

A Dual Stage Linear Prediction Approach Towards Wideband FM Demodulation With Multilevel and Partial Response Signaling

DTIC Science & Technology

2018-01-19

is available to the general public, including foreign nationals. Copies may be obtained from the Defense Technical Information Center (DTIC) (http...www.dtic.mil). Qualified requestors may obtain copies of this report from the Defense Technical Information Center (DTIC) (http://www.dtic.mil...Engineer, Spacecraft Technology Division Space Vehicles Directorate This report is published in the interest of scientific and technical information

Ozone (O3) Standards - Other Technical Documents from the Review Completed in 2015

EPA Pesticide Factsheets

These memoranda were each sent in to the Ozone NAAQS Review Docket, EPA-HQ-OAR-2008-0699, after the proposed rule was published. They present technical data on the methods, monitoring stations, and metrics used to estimate ozone concentrations.

Developing English Communication Expertise for Engineers in the Global Age

NASA Astrophysics Data System (ADS)

Ono, Yoshimasa A.; Morimura, Kumiko

This paper discusses contents and results of a new graduate course “English for Engineers and Scientists” given at School of Engineering, The University of Tokyo. This course is a new attempt to develop English communication expertise for engineering graduate students: how to write technical papers and how to make technical presentations in English. For these purposes, differences in the writing styles and in the sentence structures of English and Japanese are stressed: conclusions come first in English versus conclusions come last in Japanese; the three-step style of introduction, body, and conclusion in English versus the four-step style of ki-sho-ten-ketsu in Japanese. In addition, proper styles of technical papers (rhetoric) and related grammatical points are discussed. Technical presentation course consists of four-week lecture and seven-week practice session. In the lecture, essential points of technical presentations in English are discussed in detail, and in the practice session students‧ presentation skills are improved through guidance and instructions given by native-speaker moderators. The class evaluation results show that most students have obtained necessary skills of technical presentation, indicating that the combined course of lecture and practice session is essential for training students to make better technical presentations in English.

Conversion of paper-based technical manuals to interactive electronic technical manuals

NASA Astrophysics Data System (ADS)

Kuo, Mu-Hsing

1999-12-01

An IETM is intended to be the functional equivalent of a paper-based Technical Manual (TM), and in most cases a total replacement for paper manual. In this paper, we will describe some of document image understanding technologies applied to the conversion of paper-based TMs to IETMs. Using these advanced technologies allow us to convert paper-based TMs to class 1/2 IETMs. However, these were not sufficient for an automated integrated logistics support system in the ROC Department of Defense. An advanced IETM system is therefore required. Such class 4/5 like IETM system could provide intelligent display of information and other user applications such as diagnostics, intelligent design and manufacturing, or computer-managed training. The author has developed some of the advanced functions, and examples will be shown to demonstrate the new aspect of IETMs.

Technical structure of the global nanoscience and nanotechnology literature

NASA Astrophysics Data System (ADS)

Kostoff, Ronald N.; Koytcheff, Raymond G.; Lau, Clifford G. Y.

2007-10-01

Text mining was used to extract technical intelligence from the open source global nanotechnology and nanoscience research literature. An extensive nanotechnology/nanoscience-focused query was applied to the Science Citation Index/Social Science Citation Index (SCI/SSCI) databases. The nanotechnology/nanoscience research literature technical structure (taxonomy) was obtained using computational linguistics/document clustering and factor analysis. The infrastructure (prolific authors, key journals/institutions/countries, most cited authors/journals/documents) for each of the clusters generated by the document clustering algorithm was obtained using bibliometrics. Another novel addition was the use of phrase auto-correlation maps to show technical thrust areas based on phrase co-occurrence in Abstracts, and the use of phrase-phrase cross-correlation maps to show technical thrust areas based on phrase relations due to the sharing of common co-occurring phrases. The ˜400 most cited nanotechnology papers since 1991 were grouped, and their characteristics generated. Whereas the main analysis provided technical thrusts of all nanotechnology papers retrieved, analysis of the most cited papers allowed their characteristics to be displayed. Finally, most cited papers from selected time periods were extracted, along with all publications from those time periods, and the institutions and countries were compared based on their representation in the most cited documents list relative to their representation in the most publications list.

Proceedings of the Lake Wilderness Attention Conference. Interim Technical Report, August 1, 1980 through September 30, 1980.

ERIC Educational Resources Information Center

Lansman, Marcy, Ed.; Hunt, Earl, Ed.

This technical report contains papers prepared by the 11 speakers at the 1980 Lake Wilderness (Seattle, Washington) Conference on Attention. The papers are divided into general models, physiological evidence, and visual attention categories. Topics of the papers include the following: (1) willed versus automatic control of behavior; (2) multiple…

Correlation of Shear Strength Between Longitudial and Transverse Specimens

DTIC Science & Technology

2012-05-17

Transverse Specimens" (2012). University of New Orleans Theses and Dissertations. Paper 1435. http://scholarworks.uno.edu/ td /1435 Report Documentation... ATI ) and they were  the sole providers of this metal during this project.  ATI  called the alloy:  ATI  425; it is very similar  in its properties to...Nie, C.; Dong, P.. Traction Stress Based Shear Strength Definition of Fillet Welds. Pending  Publishing.  [5] ATI  38‐644 Beta Titanium Alloy. Technical

Overview of NASA Glenn Seal Project

NASA Technical Reports Server (NTRS)

Steinetz, Bruce M.

2007-01-01

NASA Glenn hosted the Seals/Secondary Air System Workshop on November 14-15, 2006. At this workshop NASA and our industry and university partners shared their respective seal technology developments. We use these workshops as a technical forum to exchange recent advancements and "lessons-learned" in advancing seal technology and solving problems of common interest. As in the past we are publishing the presentations from this workshop in two volumes. Volume I will be publicly available and individual papers will be made available on-line through the web page address listed at the end of this presentation. Volume II will be restricted as Sensitive But Unclassified (SBU) under International Traffic and Arms Regulations (ITAR).

A Review on Technical and Clinical Impact of Microsoft Kinect on Physical Therapy and Rehabilitation

PubMed Central

Mousavi Hondori, Hossein; Khademi, Maryam

2014-01-01

This paper reviews technical and clinical impact of the Microsoft Kinect in physical therapy and rehabilitation. It covers the studies on patients with neurological disorders including stroke, Parkinson's, cerebral palsy, and MS as well as the elderly patients. Search results in Pubmed and Google scholar reveal increasing interest in using Kinect in medical application. Relevant papers are reviewed and divided into three groups: (1) papers which evaluated Kinect's accuracy and reliability, (2) papers which used Kinect for a rehabilitation system and provided clinical evaluation involving patients, and (3) papers which proposed a Kinect-based system for rehabilitation but fell short of providing clinical validation. At last, to serve as technical comparison to help future rehabilitation design other sensors similar to Kinect are reviewed. PMID:27006935

A Review on Technical and Clinical Impact of Microsoft Kinect on Physical Therapy and Rehabilitation.

PubMed

Mousavi Hondori, Hossein; Khademi, Maryam

2014-01-01

This paper reviews technical and clinical impact of the Microsoft Kinect in physical therapy and rehabilitation. It covers the studies on patients with neurological disorders including stroke, Parkinson's, cerebral palsy, and MS as well as the elderly patients. Search results in Pubmed and Google scholar reveal increasing interest in using Kinect in medical application. Relevant papers are reviewed and divided into three groups: (1) papers which evaluated Kinect's accuracy and reliability, (2) papers which used Kinect for a rehabilitation system and provided clinical evaluation involving patients, and (3) papers which proposed a Kinect-based system for rehabilitation but fell short of providing clinical validation. At last, to serve as technical comparison to help future rehabilitation design other sensors similar to Kinect are reviewed.

Building a learning health system using clinical registers: a non-technical introduction.

PubMed

Ovretveit, John; Nelson, Eugene; James, Brent

2016-10-10

Purpose The purpose of this paper is to describe how clinical registers were designed and used to serve multiple purposes in three health systems, in order to contribute practical experience for building learning healthcare systems. Design/methodology/approach Case description and comparison of the development and use of clinical registries, drawing on participants' experience and published and unpublished research. Findings Clinical registers and new software systems enable fact-based decisions by patients, clinicians, and managers about better care, as well as new and more economical research. Designing systems to present the data for users' daily work appears to be the key to effective use of the potential afforded by digital data. Research limitations/implications The case descriptions draw on the experience of the authors who were involved in the development of the registers, as well as on published and unpublished research. There is limited data about outcomes for patients or cost-effectiveness. Practical implications The cases show the significant investments which are needed to make effective use of clinical register data. There are limited skills to design and apply the digital systems to make the best use of the systems and to reduce their disadvantages. More use can be made of digital data for quality improvement, patient empowerment and support, and for research. Social implications Patients can use their data combined with other data to self-manage their chronic conditions. There are challenges in designing and using systems so that those with lower health and computer literacy and incomes also benefit from these systems, otherwise the digital revolution may increase health inequalities. Originality/value The paper shows three real examples of clinical registers which have been developed as part of their host health systems' strategies to develop learning healthcare systems. The paper gives a simple non-technical introduction and overview for clinicians, managers, policy-advisors and improvers of what is possible and the challenges, and highlights the need to shape the design and implementation of digital infrastructures in healthcare services to serve users.

Surface-Water Data, Georgia, Water Year 1999

USGS Publications Warehouse

Alhadeff, S. Jack; Landers, Mark N.; McCallum, Brian E.

1999-01-01

Water resources data for the 1999 water year for Georgia consists of records of stage, discharge, and water quality of streams; and the stage and contents of lakes and reservoirs published in one volume in a digital format on a CD-ROM. This volume contains discharge records of 121 gaging stations; stage for 13 gaging stations; stage and contents for 18 lakes and reservoirs; continuous water quality records for 10 stations; and the annual peak stage and annual peak discharge for 75 crest-stage partial-record stations. These data represent that part of the National Water Data System collected by the U.S. Geological Survey and cooperating State and Federal agencies in Georgia. Records of discharge and stage of streams, and contents or stage of lakes and reservoirs were first published in a series of U.S. Geological water-supply papers entitled, 'Surface-Water Supply of the United States.' Through September 30, 1960, these water-supply papers were in an annual series and then in a 5-year series for 1961-65 and 1966-70. Records of chemical quality, water temperature, and suspended sediment were published from 1941 to 1970 in an annual series of water-supply papers entitled, 'Quality of Surface Waters of the United States.' Records of ground-water levels were published from 1935 to 1974 in a series of water-supply papers entitled, 'Ground-Water Levels in the United States.' Water-supply papers may be consulted in the libraries of the principal cities in the United States or may be purchased from the U.S. Geological Survey, Branch of Information Services, Federal Center, Box 25286, Denver, CO 80225. For water years 1961 through 1970, streamflow data were released by the U.S. Geological Survey in annual reports on a State-boundary basis prior to the two 5-year series water-supply papers, which cover this period. The data contained in the water-supply papers are considered the official record. Water-quality records for water years 1964 through 1970 were similarly released either in separate reports or in conjunction with streamflow records. Beginning with the 1971 water year, water data for streamflow, water quality, and ground water are published in official Survey reports on a State-boundary basis. These official Survey reports carry an identification number consisting of the two-letter State abbreviation, the last two digits of the water year, and the volume number. For example, this volume is identified as 'U.S. Geological Survey Water-Data Report GA-99-1.' These water-data reports are for sale in various formats, by the National Technical Information Service, U.S. Department of Commerce, Springfield, VA 22161.

Publisher Correction: Measuring progress from nationally determined contributions to mid-century strategies

NASA Astrophysics Data System (ADS)

Iyer, Gokul; Ledna, Catherine; Clarke, Leon; Edmonds, James; McJeon, Haewon; Kyle, Page; Williams, James H.

2018-03-01

In the version of this Article previously published, technical problems led to the wrong summary appearing on the homepage, and an incorrect Supplementary Information file being uploaded. Both errors have now been corrected.

A list of highly influential biomedical researchers, 1996-2011.

PubMed

Boyack, Kevin W; Klavans, Richard; Sorensen, Aaron A; Ioannidis, John P A

2013-12-01

We have generated a list of highly influential biomedical researchers based on Scopus citation data from the period 1996-2011. Of the 15,153,100 author identifiers in Scopus, approximately 1% (n=149,655) have an h-index >=20. Of those, we selected 532 authors who belonged to the 400 with highest total citation count (>=25,142 citations) and/or the 400 with highest h-index (>=76). Of those, we selected the top-400 living core biomedical researchers based on a normalized score combining total citations and h-index. Another 62 authors whose focus is outside biomedicine had a normalized score that was at least as high as the score of the 400th core biomedical researcher. We provide information on the profile of these most influential authors, including the most common Medical Subject Heading terms in their articles that are also specific to their work, most common journals where they publish, number of papers with over 100 citations that they have published as first/single, last, or middle authors, and impact score adjusted for authorship positions, given that crude citation indices and authorship positions are almost totally orthogonal. We also show for each researcher the distribution of their papers across 4 main levels (basic-to-applied) of research. We discuss technical issues, limitations and caveats, comparisons against other lists of highly-cited researchers, and potential uses of this resource. © 2013 Stichting European Society for Clinical Investigation Journal Foundation. Published by John Wiley & Sons Ltd.

Planned Merger of 2 Big Journal Publishers Worries Academic Librarians

ERIC Educational Resources Information Center

Glenn, David

2006-01-01

Last week the venerable publisher John Wiley & Sons made a surprise announcement that it would purchase Blackwell Publishing Ltd. for about $1.13-billion, an acquisition likely to have broad consequences for the world of academic journals and libraries. Assuming that the deal is completed, Wiley's scientific, technical, and medical division will…

World Wide Comparism of Technical and Vocational Education: Lessons for Nigerian Technical and Vocational Education Sector (I)

ERIC Educational Resources Information Center

Ayeni, Abiodun Olumide

2015-01-01

This paper compared technical/vocational education in: Germany, Australia, Finland, Hong Kong, Hungary, India, Japan, South Korea, Mexico, and Nigeria, and found that technical/vocational education was given proper attention in countries considered except Nigeria, where it was handled with laissez faire attitude. Set-Up of Technical/Vocational…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkening, D.A.

This paper discusses the extent to which bomber/cruise missile characteristics and activities can be monitored by national technical means (NTM). Particular attention is paid to those characteristics and activities relevant to arms control. National technical means--which refers to various technical means by which monitoring data can be gathered, usually involving satellite reconnaissance--are not the sole means for monitoring, though they may be the most dependable. This paper discusses the confidence one might have in monitoring bombers and cruise missiles.

CPTSC 2001: Managing Change and Growth in Technical and Scientific Communication. Proceedings of the Annual Conference of the Council for Programs in Technical and Scientific Communication (28th, Pittsburgh, Pennsylvania, October 11-13, 2001).

ERIC Educational Resources Information Center

Maylath, Bruce, Ed.

This proceedings presents 43 papers delivered at the 2001 annual meeting of the Council for Programs in Technical and Scientific Communication (CPTSC). Papers in the proceedings include the following: "Act IV: On Being Less Invisible" (Bill Karis); "Building a Community of Professional Communicators by Mapping Needs and Assets"…

Publications of the Jet Propulsion Laboratory, January through December 1974. [deep space network, Apollo project, information theory, and space exploration

NASA Technical Reports Server (NTRS)

1975-01-01

Formalized technical reporting is described and indexed, which resulted from scientific and engineering work performed, or managed, by the Jet Propulsion Laboratory. The five classes of publications included are technical reports, technical memorandums, articles from the bimonthly Deep Space Network Progress Report, special publications, and articles published in the open literature. The publications are indexed by author, subject, and publication type and number.

NASAwide electronic publishing system-prototype STI electronic document distribution: Stage-4 evaluation report. Part 2; Appendices

NASA Technical Reports Server (NTRS)

Tuey, Richard C.; Collins, Mary; Caswell, Pamela; Haynes, Bob; Nelson, Michael L.; Holm, Jeanne; Buquo, Lynn; Tingle, Annette; Cooper, Bill; Stiltner, Roy

1996-01-01

This evaluation report contains an introduction, seven chapters, and five appendices. The Introduction describes the purpose, conceptual framework, functional description, and technical report server of the Scientific and Technical Information (STI) Electronic Document Distribution (EDD) project. Chapter 1 documents the results of the prototype STI EDD in actual operation. Chapter 2 documents each NASA center's post processing publication processes. Chapter 3 documents each center's STI software, hardware. and communications configurations. Chapter 7 documents STI EDD policy, practices, and procedures. The appendices consist of (A) the STI EDD Project Plan, (B) Team members, (C) Phasing Schedules, (D) Accessing On-line Reports, and (E) Creating an HTML File and Setting Up an xTRS. In summary, Stage 4 of the NASAwide Electronic Publishing System is the final phase of its implementation through the prototyping and gradual integration of each NASA center's electronic printing systems, desk top publishing systems, and technical report servers, to be able to provide to NASA's engineers, researchers, scientists, and external users, the widest practicable and appropriate dissemination of information concerning its activities and the result thereof to their work stations.

A Review of Calibration Transfer Practices and Instrument Differences in Spectroscopy.

PubMed

Workman, Jerome J

2018-03-01

Calibration transfer for use with spectroscopic instruments, particularly for near-infrared, infrared, and Raman analysis, has been the subject of multiple articles, research papers, book chapters, and technical reviews. There has been a myriad of approaches published and claims made for resolving the problems associated with transferring calibrations; however, the capability of attaining identical results over time from two or more instruments using an identical calibration still eludes technologists. Calibration transfer, in a precise definition, refers to a series of analytical approaches or chemometric techniques used to attempt to apply a single spectral database, and the calibration model developed using that database, for two or more instruments, with statistically retained accuracy and precision. Ideally, one would develop a single calibration for any particular application, and move it indiscriminately across instruments and achieve identical analysis or prediction results. There are many technical aspects involved in such precision calibration transfer, related to the measuring instrument reproducibility and repeatability, the reference chemical values used for the calibration, the multivariate mathematics used for calibration, and sample presentation repeatability and reproducibility. Ideally, a multivariate model developed on a single instrument would provide a statistically identical analysis when used on other instruments following transfer. This paper reviews common calibration transfer techniques, mostly related to instrument differences, and the mathematics of the uncertainty between instruments when making spectroscopic measurements of identical samples. It does not specifically address calibration maintenance or reference laboratory differences.

Web-Enhanced Instruction and Learning: Findings of a Short- and Long-Term Impact Study and Teacher Use of NASA Web Resources

NASA Technical Reports Server (NTRS)

McCarthy, Marianne C.; Grabowski, Barbara L.; Koszalka, Tiffany

2003-01-01

Over a three-year period, researchers and educators from the Pennsylvania State University (PSU), University Park, Pennsylvania, and the NASA Dryden Flight Research Center (DFRC), Edwards, California, worked together to analyze, develop, implement and evaluate materials and tools that enable teachers to use NASA Web resources effectively for teaching science, mathematics, technology and geography. Two conference publications and one technical paper have already been published as part of this educational research series on Web-based instruction and learning. This technical paper, Web-Enhanced Instruction and Learning: Findings of a Short- and Long-Term Impact Study, is the culminating report in this educational research series and is based on the final report submitted to NASA. This report describes the broad spectrum of data gathered from teachers about their experiences using NASA Web resources in the classroom. It also describes participating teachers responses and feedback about the use of the NASA Web-Enhanced Learning Environment Strategies reflection tool on their teaching practices. The reflection tool was designed to help teachers merge the vast array of NASA resources with the best teaching methods, taking into consideration grade levels, subject areas and teaching preferences. The teachers described their attitudes toward technology and innovation in the classroom and their experiences and perceptions as they attempted to integrate Web resources into science, mathematics, technology and geography instruction.

Development of laser technology in Poland: 2016

NASA Astrophysics Data System (ADS)

Jankiewicz, Zdzisław; Jabczyński, Jan K.; Romaniuk, Ryszard S.

2016-12-01

The paper is an introduction to the volume of proceedings and a concise digest of works presented during the XIth National Symposium on Laser Technology (SLT2016) [1]. The Symposium is organized since 1984 every three years [2-8]. SLT2016 was organized by the Institute of Optoelectronics, Military University of Technology (IO, WAT) [9], Warsaw, with cooperation of Warsaw University of Technology (WUT) [10], in Jastarnia on 27-30 September 2016. Symposium Proceedings are traditionally published by SPIE [11-19]. The meeting has gathered around 150 participants who presented around 120 research and technical papers. The Symposium, organized every 3 years is a good portrait of laser technology and laser applications development in Poland at university laboratories, governmental institutes, company R&D laboratories, etc. The SLT also presents the current technical projects under realization by the national research, development and industrial teams. Topical tracks of the Symposium, traditionally divided to two large areas - sources and applications, were: laser sources in near and medium infrared, picosecond and femtosecond lasers, optical fiber lasers and amplifiers, semiconductor lasers, high power and high energy lasers and their applications, new materials and components for laser technology, applications of laser technology in measurements, metrology and science, military applications of laser technology, laser applications in environment protection and remote detection of trace substances, laser applications in medicine and biomedical engineering, laser applications in industry, technologies and material engineering.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 17: The relationship between seven variables and the use of US government technical reports by US aerospace engineers and scientists

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.; Glassman, Nanci; Demerath, Loren

1991-01-01

A study was undertaken to investigate the relationship between the use of U.S. government technical reports by U.S. aerospace engineers and scientists and seven selected sociometric variables. Data were collected by means of a self-administered mail survey which was distributed to a randomly drawn sample of American Institute of Aeronautics and Astronautics (AIAA) members. Two research questions concerning the use of conference meeting papers, journal articles, in-house technical reports, and U.S. government technical reports were investigated. Relevance, technical quality, and accessibility were found to be more important determinants of the overall extent to which U.S. government technical reports and three other information products were used by U.S. aerospace engineers and scientists.

The Treatment of Assets and Income From Assets in Income-Conditioned Government Benefit Programs; Technical Papers.

ERIC Educational Resources Information Center

Wisconsin Univ., Madison. Inst. for Research on Poverty.

These technical papers were presented at the Conference on Treatment of Assets and Income from Assets in Income Conditioned Programs. Six papers dealing with current and alternative treatments of assets and income from assets in programs that offer both cash and noncash benefits were presented. The first three authors reviewed the network of rules…

Substance Abuse and the Law: A Technical Assistance Paper for the Street Law Substance Abuse Lessons.

ERIC Educational Resources Information Center

National Inst. for Citizen Education in the Law, Washington, DC.

This technical assistance paper is designed to give trainers guidance on teaching the development and use of substance-abuse lessons found in "Street Law: A Course in Practical Law." The paper provides background on the lessons, a rationale for using the lessons, and sample agendas to use in training. "Street Law" contains…

14 CFR 21.253 - Type certificates: application.

Code of Federal Regulations, 2010 CFR

2010-01-01

... made; (4) After placing the required technical data and type inspection report in the technical data... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Type certificates: application. 21.253....253 Type certificates: application. Link to an amendment published at 74 FR 53390, October 16, 2009...

Conditions of Employment of Technical/Vocational Teachers.

ERIC Educational Resources Information Center

Abrillo, Harry

A study examined the job requirements and working conditions of vocational and technical education teachers (VTETs) in India, Indonesia, Malaysia, Singapore, and Thailand. Data were gathered (1) from published materials and interviews with officers and staff of concerned agencies and (2) from a project-developed questionnaire that was administered…

78 FR 34264 - Technical Corrections to the HIPAA Privacy, Security, and Enforcement Rules

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-07

...-AA03 Technical Corrections to the HIPAA Privacy, Security, and Enforcement Rules AGENCY: Office for... corrections address certain inadvertent errors and omissions in the HIPAA Privacy, Security, and Enforcement... (HHS or ``the Department'') published a final rule to implement changes to the HIPAA Privacy, Security...

77 FR 62147 - Night Definition; Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-12

.... Nos. 1-1] Night Definition; Technical Amendment AGENCY: Federal Aviation Administration, DOT. ACTION... Canada. In 14 CFR 1.1 the definition of night refers to twilight times as published in the ``American Air... make the amendment effective in less than 30 days. List of Subjects in 14 CFR Part 1 Air transportation...

Technical Publications as Graduate Class Projects: Advantages and Potential Disadvantages

ERIC Educational Resources Information Center

Copenheaver, Carolyn A.; Predmore, S. Andrew; Fuhrman, Nicholas E.

2016-01-01

Graduate students are rewarded with better job opportunities if they can demonstrate a productive publishing record. In this article we report on a writing program that generated technical publications in a discipline-based graduate class. Seventeen student authors were interviewed about the influence of the experience on their professional…

75 FR 41404 - List of Approved Spent Fuel Storage Casks: NUHOMS®

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-16

.... The NRC is taking this action because the applicant identified that a certain Technical Specification (TS) for Boral characterization was not written precisely. Specifically, the requirements for meeting... changes to the technical specifications. The NRC also published a direct final rule on May 6, 2010 (75 FR...

77 FR 13026 - Energy Conservation Program: Energy Conservation Standard for Automatic Commercial Ice Makers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

... written comments on these subjects. This document announces an extension of the time period for submitting... preliminary technical support document (preliminary TSD) for automatic commercial ice makers. The comment... published a Federal Register notice announcing the availability of its preliminary technical support...

48 CFR 27.404-3 - Copyrighted works.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., without prior approval of the contracting officer, to assert copyright in technical or scientific articles based on or containing such data that is published in academic, technical or professional journals...— (i) Data consist of a report that represents the official views of the agency or that the agency is...

Technosocial Modeling of IED Threat Scenarios and Attacks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitney, Paul D.; Brothers, Alan J.; Coles, Garill A.

2009-03-23

This paper describes an approach for integrating sociological and technical models to develop more complete threat assessment. Current approaches to analyzing and addressing threats tend to focus on the technical factors. This paper addresses development of predictive models that encompass behavioral as well as these technical factors. Using improvised explosive device (IED) attacks as motivation, this model supports identification of intervention activities 'left of boom' as well as prioritizing attack modalities. We show how Bayes nets integrate social factors associated with IED attacks into general threat model containing technical and organizational steps from planning through obtaining the IED to initiationmore » of the attack. The social models are computationally-based representations of relevant social science literature that describes human decision making and physical factors. When combined with technical models, the resulting model provides improved knowledge integration into threat assessment for monitoring. This paper discusses the construction of IED threat scenarios, integration of diverse factors into an analytical framework for threat assessment, indicator identification for future threats, and future research directions.« less

Structures Division

NASA Technical Reports Server (NTRS)

1997-01-01

The NASA Lewis Research Center Structures Division is an international leader and pioneer in developing new structural analysis, life prediction, and failure analysis related to rotating machinery and more specifically to hot section components in air-breathing aircraft engines and spacecraft propulsion systems. The research consists of both deterministic and probabilistic methodology. Studies include, but are not limited to, high-cycle and low-cycle fatigue as well as material creep. Studies of structural failure are at both the micro- and macrolevels. Nondestructive evaluation methods related to structural reliability are developed, applied, and evaluated. Materials from which structural components are made, studied, and tested are monolithics and metal-matrix, polymer-matrix, and ceramic-matrix composites. Aeroelastic models are developed and used to determine the cyclic loading and life of fan and turbine blades. Life models are developed and tested for bearings, seals, and other mechanical components, such as magnetic suspensions. Results of these studies are published in NASA technical papers and reference publication as well as in technical society journal articles. The results of the work of the Structures Division and the bibliography of its publications for calendar year 1995 are presented.

Technical aspects of MRI signal change quantification after gadolinium-based contrast agents' administration.

PubMed

Ramalho, Joana; Ramalho, Miguel; AlObaidy, Mamdoh; Semelka, Richard C

2016-12-01

Over the last 2years several studies have been published regarding gadolinium deposition in brain structures in patients with normal renal function after repeated administrations of gadolinium-based contrast agents (GBCAs). Most of the publications are magnetic resonance imaging (MRI) based retrospective studies, where gadolinium deposition may be indirectly measured by evaluating changes in T1 signal intensity (SI) in brain tissue, particularly in the dentate nucleus (DN) and/or globus pallidi (GP). The direct correlation between T1 signal changes and gadolinium deposition was validated by human pathology studies. However, the variability of the MR equipment and parameters used across different publications, along with the inherent limitations of MRI to assess gadolinium in human tissues should be acknowledged when interpreting those studies. Nevertheless, MRI studies remain essential regarding gadolinium bio-distribution knowledge. The aim of this paper is to overview current knowledge of technical aspects of T1 signal intensity evaluation by MRI and describe confounding factors, with the intention to achieve higher accuracy and maximize reproducibility. Copyright © 2016 Elsevier Inc. All rights reserved.

Distilling Reliable Remedies: Hieronymus Brunschwig’s Liber de arte distillandi (1500) Between Alchemical Learning and Craft Practice

PubMed Central

Taape, Tillmann

2017-01-01

Hieronymus Brunschwig’s Liber de arte distillandi, written in German and first published in Strasbourg in 1500, was the first printed manual on the distillation of medicinal waters. Although influential among early modern audiences and well-known to modern scholars, its intriguing blend of intellectual and practical traditions has thus far received little attention. This paper identifies these strands in Brunschwig’s technical instructions and shows how they intertwine in the production of reliable remedies. Exploring the intellectual dimension of Brunschwig’s work, I argue that his concept of distillation is shaped by an alchemical understanding of matter, especially by the writings on ‘quintessence’ of the fourteenth-century alchemist John of Rupescissa. To realise this concept in the workshop, Brunschwig emphasises the central importance of the body and its senses to ensure true craftsmanship. Brunschwig’s printed manual was as much a product of skilled artisanal practices as the distilled waters it describes, and I argue that it was shaped by the same concerns about technical precision and reliability. PMID:25276873

Perceptions of adults with hearing impairment regarding the promotion of trust in hearing healthcare service delivery.

PubMed

Preminger, Jill E; Oxenbøll, Maria; Barnett, Margaret B; Jensen, Lisbeth D; Laplante-Lévesque, Ariane

2015-01-01

This paper describes how trust is promoted in adults with hearing impairment within the context of hearing healthcare (HHC) service delivery. Data were analysed from a previously published descriptive qualitative study that explored perspectives of adults with hearing impairment on hearing help-seeking and rehabilitation. Interview transcripts from 29 adults from four countries with different levels of hearing impairment and different experience with the HHC system were analysed thematically. Patients enter into the HHC system with service expectations resulting in a preconceived level of trust that can vary from low to high. Relational competence, technical competence, commercialized approach, and clinical environment (relevant to both the clinician and the clinic) influence a patient's resulting level of trust. Trust is evolving rather than static in HHC: Both clinicians and clinics can promote trust. The characteristics of HHC that engender trust are: practicing good communication, supporting shared decision making, displaying technical competence, offering comprehensive hearing rehabilitation, promoting self-management, avoiding a focus on hearing-aid sales, and offering a professional clinic setting.

Structures Division 1994 Annual Report

NASA Technical Reports Server (NTRS)

1996-01-01

The NASA Lewis Research Center Structures Division is an international leader and pioneer in developing new structural analysis, life prediction, and failure analysis related to rotating machinery and more specifically to hot section components in air-breathing aircraft engines and spacecraft propulsion systems. The research consists of both deterministic and probabilistic methodology. Studies include, but are not limited to, high-cycle and low-cycle fatigue as well as material creep. Studies of structural failure are at both the micro- and macrolevels. Nondestructive evaluation methods related to structural reliability are developed, applied, and evaluated. Materials from which structural components are made, studied, and tested are monolithics and metal-matrix, polymer-matrix, and ceramic-matrix composites. Aeroelastic models are developed and used to determine the cyclic loading and life of fan and turbine blades. Life models are developed and tested for bearings, seals, and other mechanical components, such as magnetic suspensions. Results of these studies are published in NASA technical papers and reference publication as well as in technical society journal articles. The results of the work of the Structures Division and the bibliography of its publications for calendar year 1994 are presented.

Endovascular Renal Artery Denervation: Why, When, and How?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sapoval, Marc, E-mail: marc.sapoval2@egp.aphp.fr; Azizi, Michel; Bobrie, Guillaume

Endovascular renal artery denervation (ERAD) is a new procedure to reduce renal and systemic sympathetic overactivity in hypertensive patients. The role of sympathetic overactivity is recognized since a long time as being one the contributor of human hypertension. In support of this view, several studies in experimental models of hypertension in animal as well as hypertensive human subjects have demonstrated that sympathetic overactivity plays a central role in hypertension catheter based renal denervation is now possible, and this procedure may provide a useful adjunct for the management of patients with drug-resistant primary hypertension. Following a cohort study, the results ofmore » an open label randomized control trial have been published showing very encouraging results. The purpose of this paper is to help interventionalists to better understand the medical and technical issues related to this new intervention. It is most likely that as underlined in a recent editorial several other technical approaches may appear in the future, however because this is the only technique that is available today, we will focus on radiofrequency based technique.« less

Image-guided radiation therapy in lymphoma management

PubMed Central

Eng, Tony

2015-01-01

Image-guided radiation therapy (IGRT) is a process of incorporating imaging techniques such as computed tomography (CT), magnetic resonance imaging (MRI), Positron emission tomography (PET), and ultrasound (US) during radiation therapy (RT) to improve treatment accuracy. It allows real-time or near real-time visualization of anatomical information to ensure that the target is in its position as planned. In addition, changes in tumor volume and location due to organ motion during treatment can be also compensated. IGRT has been gaining popularity and acceptance rapidly in RT over the past 10 years, and many published data have been reported on prostate, bladder, head and neck, and gastrointestinal cancers. However, the role of IGRT in lymphoma management is not well defined as there are only very limited published data currently available. The scope of this paper is to review the current use of IGRT in the management of lymphoma. The technical and clinical aspects of IGRT, lymphoma imaging studies, the current role of IGRT in lymphoma management and future directions will be discussed. PMID:26484299

The Scottish Structural Proteomics Facility: targets, methods and outputs

PubMed Central

Oke, Muse; Carter, Lester G.; Johnson, Kenneth A.; Liu, Huanting; McMahon, Stephen A.; Yan, Xuan; Kerou, Melina; Weikart, Nadine D.; Kadi, Nadia; Sheikh, Md. Arif; Schmelz, Stefan; Dorward, Mark; Zawadzki, Michal; Cozens, Christopher; Falconer, Helen; Powers, Helen; Overton, Ian M.; van Niekerk, C. A. Johannes; Peng, Xu; Patel, Prakash; Garrett, Roger A.; Prangishvili, David; Botting, Catherine H.; Coote, Peter J.; Dryden, David T. F.; Barton, Geoffrey J.; Schwarz-Linek, Ulrich; Challis, Gregory L.; Taylor, Garry L.; White, Malcolm F.

2010-01-01

The Scottish Structural Proteomics Facility was funded to develop a laboratory scale approach to high throughput structure determination. The effort was successful in that over 40 structures were determined. These structures and the methods harnessed to obtain them are reported here. This report reflects on the value of automation but also on the continued requirement for a high degree of scientific and technical expertise. The efficiency of the process poses challenges to the current paradigm of structural analysis and publication. In the 5 year period we published ten peer-reviewed papers reporting structural data arising from the pipeline. Nevertheless, the number of structures solved exceeded our ability to analyse and publish each new finding. By reporting the experimental details and depositing the structures we hope to maximize the impact of the project by allowing others to follow up the relevant biology. Electronic supplementary material The online version of this article (doi:10.1007/s10969-010-9090-y) contains supplementary material, which is available to authorized users. PMID:20419351

An assessment system for rating scientific journals in the field of ergonomics and human factors.

PubMed

Dul, Jan; Karwowski, Waldemar

2004-05-01

A method for selecting and rating scientific and professional journals representing the discipline of ergonomics and human factors is proposed. The method is based upon the journal list, impact factors and citations provided by the Institute of Scientific Information (ISI), and the journal list published in the Ergonomics Abstracts. Three groups of journals were distinguished. The 'ergonomics journals' focus exclusively on ergonomics and human factors. The 'related journals' focus on other disciplines than ergonomics and human factors, but regularly publish ergonomics/human factors papers. The 'basic journals' focus on other technical, medical or social sciences than ergonomics, but are important for the development of ergonomics/human factors. Journal quality was rated using a maximum of four categories: top quality (A-level), high quality (B-level), good quality (C-level)) and professional (P-level). The above methods were applied to develop the Ergonomics Journal List 2004. A total of 25 'ergonomics journals', 58 'related journals' and 142 'basic journals' were classified.

Disentangling the causes of protected-species bycatch in gillnet fisheries.

PubMed

Northridge, Simon; Coram, Alex; Kingston, Al; Crawford, Rory

2017-06-01

Gillnet fisheries are widely thought to pose a conservation threat to many populations of marine mammals, seabirds, and turtles. Gillnet fisheries also support a significant proportion of small-scale fishing communities worldwide. Despite a large number of studies on protected-species bycatch in recent decades, relatively few have examined the underlying causes of bycatch and fewer still have considered the issue from a multitaxon perspective. We used 3 bibliographic databases and one search engine to identify studies by year of publication and taxon. The majority of studies on the mechanisms of gillnet bycatch are not accessible through the mainstream published literature. Many are reported in technical papers, government reports, and university theses. We reviewed over 600 published and unpublished studies of bycatch in which causal or correlative factors were considered and identified therein 28 environmental, operational, technical, and behavioral factors that may be associated with high or low bycatch rates of the taxa. Of the factors considered, 11 were associated with potential bycatch reduction in 2 out of the 3 taxa, and 3 factors (water depth, mesh size, and net height) were associated with trends in bycatch rate for all 3 taxa. These findings provide a basis to guide further experimental work to test hypotheses about which factors most influence bycatch rates and to explore ways of managing fishing activities and improving gear design to minimize the incidental capture of species of conservation concern while ensuring the viability of the fisheries concerned. © 2017 Society for Conservation Biology.

The fifth plot of the Carcinogenic Potency Database: results of animal bioassays published in the general literature through 1988 and by the National Toxicology Program through 1989.

PubMed Central

Gold, L S; Manley, N B; Slone, T H; Garfinkel, G B; Rohrbach, L; Ames, B N

1993-01-01

This paper is the fifth plot of the Carcinogenic Potency Database (CPDB) that first appeared in this journal in 1984 (1-5). We report here results of carcinogenesis bioassays published in the general literature between January 1987 and December 1988, and in technical reports of the National Toxicology Program between July 1987 and December 1989. This supplement includes results of 412 long-term, chronic experiments of 147 test compounds and reports the same information about each experiment in the same plot format as the earlier papers: the species and strain of test animal, the route and duration of compound administration, dose level and other aspects of experimental protocol, histopathology and tumor incidence, TD50 (carcinogenic potency) and its statistical significance, dose response, author's opinion about carcinogenicity, and literature citation. We refer the reader to the 1984 publications (1,5,6) for a guide to the plot of the database, a complete description of the numerical index of carcinogenic potency, and a discussion of the sources of data, the rationale for the inclusion of particular experiments and particular target sites, and the conventions adopted in summarizing the literature. The five plots of the database are to be used together, as results of individual experiments that were published earlier are not repeated. In all, the five plots include results of 4487 experiments on 1136 chemicals. Several analyses based on the CPDB that were published earlier are described briefly, and updated results based on all five plots are given for the following earlier analyses: the most potent TD50 value by species, reproducibility of bioassay results, positivity rates, and prediction between species.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:8354183

NASAwide electronic publishing system: Electronic printing and duplicating, stage-2 evaluation report (GSFC)

NASA Technical Reports Server (NTRS)

Tuey, Richard C.; Lane, Robert; Hart, Susan V.

1995-01-01

The NASA Scientific and Technical Information Office was assigned the responsibility to continue with the expansion of the NASAwide networked electronic duplicating effort by including the Goddard Space Flight Center (GSFC) as an additional node to the existing configuration of networked electronic duplicating systems within NASA. The subject of this report is the evaluation of a networked electronic duplicating system which meets the duplicating requirements and expands electronic publishing capabilities without increasing current operating costs. This report continues the evaluation reported in 'NASA Electronic Publishing System - Electronic Printing and Duplicating Evaluation Report' (NASA TM-106242) and 'NASA Electronic Publishing System - Stage 1 Evaluation Report' (NASA TM-106510). This report differs from the previous reports through the inclusion of an external networked desktop editing, archival, and publishing functionality which did not exist with the previous networked electronic duplicating system. Additionally, a two-phase approach to the evaluation was undertaken; the first was a paper study justifying a 90-day, on-site evaluation, and the second phase was to validate, during the 90-day evaluation, the cost benefits and productivity increases that could be achieved in an operational mode. A benchmark of the functionality of the networked electronic publishing system and external networked desktop editing, archival, and publishing system was performed under a simulated daily production environment. This report can be used to guide others in determining the most cost effective duplicating/publishing alternative through the use of cost/benefit analysis and return on investment techniques. A treatise on the use of these techniques can be found by referring to 'NASA Electronic Publishing System -Cost/Benefit Methodology' (NASA TM-106662).

Developing Human Resources for the Technical Workforce: A Comparative Study of Korea and Thailand

ERIC Educational Resources Information Center

Hawley, Joshua D.; Paek, Jeeyon

2005-01-01

Asian countries face significant and growing shortages of technically skilled workers. Vocational-technical systems are key components of national human resource development. Using labor market data from Thailand and Korea, this paper analyzes the economic payoff for individual investment in vocational-technical education, and subsequent…

Unresolved Technical Issues in Fair Interest Measurement.

ERIC Educational Resources Information Center

Cole, Nancy S.

The problem of sex differences in interest measurement involves many technical issues and procedures. The purpose of this paper is to provide a description of the technical problems involved in construction, scoring, and interpretation of interest measures as related to sex differences and to suggest guidelines within these technical issues which…

22 CFR 126.17 - Exemption pursuant to the Defense Trade Cooperation Treaty between the United States and the...

Code of Federal Regulations, 2013 CFR

2013-04-01

...; (ii) Technical data (including data packages, technical papers, manuals, presentations, specifications... person who receives defense articles, including technical data, but who does not have access to such... (other than technical data) shall be individually labeled with the appropriate identification detailed in...

22 CFR 126.16 - Exemption pursuant to the Defense Trade Cooperation Treaty between the United States and Australia.

Code of Federal Regulations, 2014 CFR

2014-04-01

... section; (ii) Technical data (including data packages, technical papers, manuals, presentations..., defense articles, including technical data, for the sole purpose of effecting onward movement to members... (other than technical data) shall be individually labeled with the appropriate identification detailed in...

10th international conference on high-occupancy vehicle systems : compendium of technical papers

DOT National Transportation Integrated Search

2001-08-01

This report provides the technical papers submitted as part of the 10th International High-Occupancy Vehicle (HOV) Systems Conference held in Dallas, Texas on August 27-30, 2000. The Conference was sponsored by the Transportation Research Board (TRB)...

SWIFT Differentiated Technical Assistance. White Paper

ERIC Educational Resources Information Center

McCart, Amy; McSheehan, Michael; Sailor, Wayne; Mitchiner, Melinda; Quirk, Carol

2016-01-01

The Schoolwide Integrated Framework for Transformation (SWIFT) employs six technical assistance (TA) practices that support an initial transformation process while simultaneously building system capacity to sustain and scale up equity-based inclusion in additional schools and districts over time. This paper explains these individual practices and…

Technical notes published in BJOMS over a 2-year period--should we be doing it differently?

PubMed

Singh, M; Shekar, K; Shelley, M; Mackenzie, N; Spencer, H; Kiani, H; Brennan, P A

2009-06-01

Between January 2007 and December 2008, 44 technical notes or related publications (such as letters) were published in the British Journal of Oral and Maxillofacial Surgery (BJOMS). These covered most of the remit of the specialty and ranged from operative surgical techniques to the use of digital photographs to orientate surgical specimens. However, there would seem to be very little feedback on the value of these articles in everyday practice. We reviewed these technical notes and assessed readability, the value and use of illustrations, the possible expense and/or equipment required in their use, and finally the frequency that the techniques could be used. The anonymised publications were read and scored by a minimum of two dentally qualified senior house officers, two doubly qualified specialist registrars, an SAS grade and two consultants in oral and maxillofacial surgery. The six techniques that gained the highest mean average score are briefly discussed. Although we used a relatively small number of assessors who might not be representative of the whole BJOMS readership, this study would suggest that some sort of change in the way that these technical notes are published should be considered. Options might include inviting a commentary from the reviewers who have tried the technique and also encouraging colleagues to report their experiences of these techniques in the 'letters to the editor' section.

SeaWiFS Technical Report Series. Volume 43; SeaWiFS Prelaunch Technical Report Series Final Cumulative Index

NASA Technical Reports Server (NTRS)

Firestone, Elaine R. (Editor); Hooker, Stanford B.

1998-01-01

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS), which ceased operations in 1986, after an eight-year mission. SeaWiFS was launched on 1 August 1997, on the SeaStar satellite, built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC), undertook the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. This documentation, entitled the SeaWiFS Technical Report Series, is in the form of NASA Technical Memorandum Number 104566 and 1998-104566. All reports published are volumes within the series. This particular volume, which is the last of the so-called Prelaunch Series serves as a reference, or guidebook, to the previous 42 volumes and consists of 6 sections including: an addenda, an errata, an index to key words and phrases, lists of acronyms and symbols used, and a list of all references cited. The editors have published a cumulative index of this type after every five volumes. Each index covers the reference topics published in all previous editions, that is, each new index includes all of the information contained in the preceding indexes with the exception of any addenda.

NASA Scientific and Technical Publications: A Catalog of Special Publications, Reference Publications, Conference Publications, and Technical Papers 1987-1990

DTIC Science & Technology

1991-02-01

Technical Papers present the results of significant research conducted by NASA scientists and engineers. Presented here are citations for reports from each...CSCL contains photographs of 322 galaxies including the majority of all 03A Shapley-Ames bright galaxies, plus cluster members in the Virgo A...Catalog of Open Clusters and Associated Interstellar Matter Research Council, London, United Kingdom Sponsored by NASA, summarizes observations of 128 open

Bibliography of Technical Publications and Papers, October 1978 - September 1979

DTIC Science & Technology

1979-11-01

overnutrition. Symposium on Psychosocial Factors in Nutritional Problems, llth International Congress of Nutrition, Rio de Janeiro , Brazil, September...VBIOGRAPHY OF-TZHNICAL BLICATIONS AND An T7 Octber118 -Seu~imb~ 199k6. PERFORMNING OR0. REPORT NUMBER 7. AUTMOR( e ) S. CONTRACT -OR G ANT HNDMER~a) 9...Officer Advanced Class 79-2, US Army Quartermaster School, Fort Lee, VA, 14 August 1979. 6 OFFICE OF TECHNICAL DIRECTOR Technical Papers 12. ROSS, E . W

Figures of Merit for Lunar Simulants

NASA Technical Reports Server (NTRS)

Slane, Frederick A.; Rickman, Douglas L.

2012-01-01

At an earlier SRR the concept for an international standard on Lunar regolith simulants was presented. The international standard, ISO 10788, Lunar Simulants, has recently been published. This paper presents the final content of the standard. Therefore, we are presenting an update of the following: The collection and analysis of lunar samples from 1969 to present has yielded large amounts of data. Published analyses give some idea of the complex nature of the regolith at all scales, rocks, soils and the smaller particulates commonly referred to as dust. Data recently acquired in support of NASA s simulant effort has markedly increased our knowledge and quantitatively demonstrates that complexity. It is anticipated that future analyses will further add to the known complexity. In an effort to communicate among the diverse technical communities performing research on or research using regolith samples and simulants, a set of Figures of Merit (FoM) have been devised. The objective is to allow consistent and concise comparative communication between researchers from multiple organizations and nations engaged in lunar exploration. This paper describes Figures of Merit in a new international standard for Lunar Simulants. The FoM methodology uses scientific understanding of the lunar samples to formulate parameters which are reproducibly quantifiable. Contaminants and impurities in the samples are also addressed.

Proceedings of the CASE Adoption Workshop Held in Pittsburgh, Pennsylvania on 13-14 November 1990

DTIC Science & Technology

1992-05-01

position. It Is published in the interest of scientific and technical information exchange. Review and Approval This report has been reviewed and is...available through the Defense Technical Information Center. DTIC provides access so and transr of scientific and technical information for DoD... Metthods and Tools $1,850 P-Cube Corporation 572 East Lamibert Rd CASEbase (a PC-based CASE database) $495 Brea, CA 92621 (714) 990-3169 Foresite

Deployment Area Selection and Land Withdrawal/Acquisition. M-X/MPS (M-X/Multiple Protective Shelter) Environmental Technical Report. Nye County, Nevada.

DTIC Science & Technology

1981-10-02

captures the environ- mental data and analysis in the document that was nearing com- pletion when the President decided to deploy the system in a...environmental technical " data from the Congress, federal agencies and the states involved, we have published limited copies of the document for their use...Land Withdrawal/Acquisition Environmental Impact Statement (FEIS) and its associated Environmental Technical Reports (ETRs). The data tables

Energygrams: Brief descriptions of energy technology

NASA Astrophysics Data System (ADS)

Simpson, W. F., Jr.

This compilation of technical notes (called Energygrams) is published by the Technical Information Center. Energygrams are usually one-page illustrated bulletins describing DOE technology or data and telling how to obtain the technical reports or other material on which they are based. Frequently a personal contact is given who can provide program information in addition to the data found in the reports. The compilation is organized by subject categories, and, within each category, Energygrams are presented alphabetically by Energygram title.

Book Review: Space Research at the Technical University of Moldova.

NASA Astrophysics Data System (ADS)

Gaina, Alex

Recently the historian of the Technical University of Moldova Aurel Marinchuk (Marinciuc) in a collaboration with the editorial team from the same University has published a Jubiliary Album "50 Years of the Technical University of Moldova". The Album is published at the Technical University in Chisinau (The Republic of Moldova). Two chapters of this album present major interest: 1) Space research at the Technical University of Moldova 2) The Foucault Pendulum manufactured at the same University under the supervision of the Rector of University, Dr. Hab. of Technical Sciences and Member of the Academy of Sciences of the Republic of Moldova Ion Bostan. The parameters of the Pendulums are: m=102 kg L=17,24 m T=8.35 sec. >From the first chapter We learn that 3 astronauts: Frank Lee Culbertson, Vladimir Dezhurov and Dumitru Dorin Prunariu are Doctors Honoris Causa of this University. As well we can found in the album informations about the Microsatellit "Republic of Moldova" built also by a team from the same University. It is ready to fly, but many depends on the funds for launch the Satellite. The Foucault Pendulum presents also interest in view of its possible applications to detect the influence of the relative position of the Sun and the Moon on Earthquakes. As is well known the tidal gravitational Force varies, depending on the relative position of the Sun and the Moon.

Publication Anxiety: Emotion and the Stages of Publishing in the Library and Information Science Literature

ERIC Educational Resources Information Center

Sullivan, Doreen

2012-01-01

Although instruction in writing for Library and Information Science (LIS) publication is becoming more prevalent, emotions inherent in the publishing cycle are seldom discussed. Through a review of the literature this article investigates how LIS writers can develop their technical skills in publishing scholarly articles, and then looks at…

The Least Reading for the Smallest Number at the Highest Price and Counterpoint: A Publisher's Perspective.

ERIC Educational Resources Information Center

Hamaker, Charles; Tagler, John

1988-01-01

The first article describes effects of the devaluation of the dollar on American libraries that purchase scientific, technical and medical serials published in Europe, and the responses of libraries and library associations. The second presents reasons for increased serial prices from the perspective of the publishing industry. (15…

Diverse knowledges and competing interests: an essay on socio-technical problem-solving.

PubMed

di Norcia, Vincent

2002-01-01

Solving complex socio-technical problems, this paper claims, involves diverse knowledges (cognitive diversity), competing interests (social diversity), and pragmatism. To explain this view, this paper first explores two different cases: Canadian pulp and paper mill pollution and siting nuclear reactors in systematically sensitive areas of California. Solving such socio-technically complex problems involves cognitive diversity as well as social diversity and pragmatism. Cognitive diversity requires one to not only recognize relevant knowledges but also to assess their validity. Finally, it is suggested, integrating the resultant set of diverse relevant and valid knowledges determines the parameters of the solution space for the problem.

Update on inflation of journal prices: Brandon/Hill list journals and the scientific, technical, and medical publishing market.

PubMed

Schlimgen, Joan B; Kronenfeld, Michael R

2004-07-01

The original study of journal prices, using the "Brandon/ Hill Selected List of Books and Journals for the Small Medical Library," was first published in 1980 and periodically updated. This research continues to measure price increases for these titles for the periods 1996 to 1999 and 1999 to 2002. The 111 journal titles that have appeared in each published list from 1967 to 2001 were included in the study. Institutional subscription price data were gathered for each journal for the years 1996, 1999, and 2002 and were compared to the Consumer Price Index (CPI) for the same years. The average journal price continues to rise significantly and is independent of the CPI. The study found that prices have jumped 51.9% from 1996 to 1999 and 32% from 1999 to 2002, which is consistent with nearly every recent journal price study. The unprecedented rise in journal prices negatively affects the purchasing power of medical libraries. This paper examines the economic and technological pressures on the science, technology, and medical journals market that contribute to high prices and identifies a number of initiatives in the biological and health sciences that utilize alternative models for disseminating scientific research.

Publisher Correction: A molecular cross-linking approach for hybrid metal oxides

NASA Astrophysics Data System (ADS)

Jung, Dahee; Saleh, Liban M. A.; Berkson, Zachariah J.; El-Kady, Maher F.; Hwang, Jee Youn; Mohamed, Nahla; Wixtrom, Alex I.; Titarenko, Ekaterina; Shao, Yanwu; McCarthy, Kassandra; Guo, Jian; Martini, Ignacio B.; Kraemer, Stephan; Wegener, Evan C.; Saint-Cricq, Philippe; Ruehle, Bastian; Langeslay, Ryan R.; Delferro, Massimiliano; Brosmer, Jonathan L.; Hendon, Christopher H.; Gallagher-Jones, Marcus; Rodriguez, Jose; Chapman, Karena W.; Miller, Jeffrey T.; Duan, Xiangfeng; Kaner, Richard B.; Zink, Jeffrey I.; Chmelka, Bradley F.; Spokoyny, Alexander M.

2018-03-01

In the version of this Article originally published, Liban M. A. Saleh was incorrectly listed as Liban A. M. Saleh due to a technical error. This has now been amended in all online versions of the Article.

Proceedings of the IUFRO technical session on geomorphic hazards in managed forests: 5-11 August 1990: Montreal, Canada

Treesearch

Raymond M. Rice

1991-01-01

The proceedings contains 11 the 17 papers presented at the technical session on geometric hazards in managed forests at the XIX World Congress, International Union of Forestry Research Organizations, August 5-11, 1990, Montreal, Canada, plus one paper not presented orally. Two papers report research on torrents, two are about snow, three concern landslides, and five...

PISA for Development Technical Strand A: Enhancement of PISA Cognitive Instruments. OECD Education Working Papers, No. 126

ERIC Educational Resources Information Center

Adams, Ray; Cresswell, John

2016-01-01

The OECD is planning to enhance existing PISA assessment instruments in reading, mathematics and science so that they will be more suitable to the context of developing countries. The main purpose of this paper is to identify the main technical issues associated with this aim. The paper reports detailed analysis of the existing PISA item pool and…

Ground Water Technical Considerations during the Five-Year Review Process

EPA Pesticide Factsheets

This issue paper has been developed to highlight technical considerations as well as technical resources available to Remedial Project Managers (RPMs) in conducting Five-Year Reviews (FYRs) at CERCLA1 sites with contaminated groundwater.

Current principles and practice in autologous intraportal islet transplantation: a meta-analysis of the technical considerations.

PubMed

Kumar, Rohan; Chung, Wen Yuan; Dennison, Ashley Robert; Garcea, Giuseppe

2016-04-01

Autologous islet transplantation (IAT) following pancreatectomy is now a recognized, albeit highly specialized procedure carried out in a small number of centers worldwide. Current clinical principles and best practice with emphasis on examining the technical aspects of surgery in centers with significant IAT experience are reviewed. Literature search for studies discussing any technical aspect of pancreatectomy with intraportal IAT was included. Thirty-five papers were included; all were single-center case series. The indications, surgical approach to pancreatectomy with IAT, islet yield, static pancreas preservation prior to islet digestion, portal vein access, absolute islet infusion volumes, and portal venous pressure changes during transfusion evaluated. IAT is considered a "last resort" when alternative approaches have been exhausted. Pre-morbid histology and prior surgical drainage adversely influence islet yields and may influence the clinical decision to perform pancreatectomy and IAT. Following pancreas digestion, absolute numbers of islets recovered and smaller islet size predict rates of insulin independence following IAT. Islet volumes and portal venous pressure changes are important factors for the development of complications. Surgical access for IAT includes intra-operative, immediate or delayed infusion via an "exteriorized" vein, and radiological percutaneous approaches. Delayed infusion can be combined with pancreas preservation techniques prior to islet isolation. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Building, Maintaining, and Ending Relationships: An Urban School District and a Technical Assistance Team. Documentation and Technical Assistance in Urban Schools.

ERIC Educational Resources Information Center

Holmes, Manford L.

This paper describes the nature of the relationships developed between the technical assistance team of the Documentation and Technical Assistance (DTA) Project and members of a Chicago (Illinois) school district staff with whom the DTA worked. First, the methodology with which the technical assistance work was studied is described, as is the…

SCMLA: Technical Writing. Proceedings (Houston, Texas, October 1987).

ERIC Educational Resources Information Center

Oklahoma State Univ., Stillwater.

In order to make information about technical writing more available, the South Central Modern Language Association (SCMLA) has collected the papers not subject to copyright restrictions that were presented at the technical writing section of its 1987 meeting. The essays cover a wide range of topics in technical writing pedagogy and research. The…

Proceedings of the International Symposium on Technical and Vocational Education (Beijing, China, September 13-18, 1993).

ERIC Educational Resources Information Center

Chinese National Commission for UNESCO (China).

This document contains 28 papers: "Technical and Vocational Education in Asia and the Pacific: Regional Overview and Recent Innovations" (Muhammad Ashraf Qureshi); "Secondary Education in Austria" (Helmut Aigner); "The Development of Technical Curricula in Austria" (Helmut Aigner); "Technical and Vocational Education in Australia. Australian…

22 CFR 126.17 - Exemption pursuant to the Defense Trade Cooperation Treaty between the United States and the...

Code of Federal Regulations, 2014 CFR

2014-04-01

...) and (j)(1)(ii) of this section; (ii) Technical data (including data packages, technical papers... entity or person who receives, but does not have access to, defense articles, including technical data...) Defense articles (other than technical data) shall be individually labeled with the appropriate...

Posters with an artistic flair.

PubMed

Ellerbee, Susan M

2006-01-01

Posters are a popular medium used in the classroom and at conferences. Most published and Internet resources focus on the technical aspects of poster creation. The artist's perspective has rarely been addressed. The author fills that gap by presenting color theory and a balanced appearance as important elements to be considered. Specific technical and artistic considerations are presented.

Power, Language, and Professional Choices: A Hermeneutic Approach To Teaching Technical Communication.

ERIC Educational Resources Information Center

Tillery, Denise

2001-01-01

Argues that the philosophical hermeneutics of Hans-Georg Gadamer provides a useful theoretical framework from which to discuss ethical issues in the technical communication classroom. Analyzes a previously published case study to demonstrate how hermeneutics can shed light on the ways that writers can be unconscious of ethical problems in their…

Use of "t"-Test and ANOVA in Career-Technical Education Research

ERIC Educational Resources Information Center

Rojewski, Jay W.; Lee, In Heok; Gemici, Sinan

2012-01-01

Use of t-tests and analysis of variance (ANOVA) procedures in published research from three scholarly journals in career and technical education (CTE) during a recent 5-year period was examined. Information on post hoc analyses, reporting of effect size, alpha adjustments to account for multiple tests, power, and examination of assumptions…

Biological Soil Crust Technical Reference

Science.gov Websites

Technical Reference Our understanding of the biology, ecology and physiology of biological soil crusts has published studies on soil crusts. The attached PDF file is a 90-page report that summarizes our current state of knowledge about biological soil crusts, with emphasis on crusts found in the western United

"Is This Ethical?" A Survey of Opinion on Principles and Practices of Document Design.

ERIC Educational Resources Information Center

Dragga, Sam

1996-01-01

Reprints a corrected version of an article originally published in the volume 43, number 1 issue of this journal. Presents results of a national survey of technical communicators and technical communication teachers assessing the ethics of seven document design cases involving manipulation of typography, illustrations, and photographs. Offers…

76 FR 44010 - Medicare Program; Hospice Wage Index for Fiscal Year 2012; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-22

.... 93.774, Medicare-- Supplementary Medical Insurance Program) Dated: July 15, 2011. Dawn L. Smalls... corrects technical errors that appeared in the notice of CMS ruling published in the Federal Register on... FR 26731), there were technical errors that are identified and corrected in the Correction of Errors...

75 FR 70013 - Medicare Program; Inpatient Rehabilitation Facility Prospective Payment System for Federal Fiscal...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-16

... Insurance; and Program No. 93.774, Medicare-- Supplementary Medical Insurance Program) Dated: November 9...: Correction notice. SUMMARY: This document corrects a technical error that appeared in the notice published in... of July 22, 2010 (75 FR 42836), there was a technical error that we are identifying and correcting in...

Preventing intra-urethral migration of a guidewire during antegrade placement of a JJ stent: a technical modification.

PubMed

Bansal, Ankur; Gupta, Piyush; Dalela, Disha; Dalela, Diwakar

2016-03-07

A JJ stent is usually inserted in antegrade fashion after percutaneous renal surgery. We describe a new technical modification for antegrade stent insertion that prevents intraoperative intra-urethral migration of the guidewire and saves operative time and cost. 2016 BMJ Publishing Group Ltd.

RepExplore: addressing technical replicate variance in proteomics and metabolomics data analysis.

PubMed

Glaab, Enrico; Schneider, Reinhard

2015-07-01

High-throughput omics datasets often contain technical replicates included to account for technical sources of noise in the measurement process. Although summarizing these replicate measurements by using robust averages may help to reduce the influence of noise on downstream data analysis, the information on the variance across the replicate measurements is lost in the averaging process and therefore typically disregarded in subsequent statistical analyses.We introduce RepExplore, a web-service dedicated to exploit the information captured in the technical replicate variance to provide more reliable and informative differential expression and abundance statistics for omics datasets. The software builds on previously published statistical methods, which have been applied successfully to biomedical omics data but are difficult to use without prior experience in programming or scripting. RepExplore facilitates the analysis by providing a fully automated data processing and interactive ranking tables, whisker plot, heat map and principal component analysis visualizations to interpret omics data and derived statistics. Freely available at http://www.repexplore.tk enrico.glaab@uni.lu Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press.

Second Annual Workshop on Space Operations Automation and Robotics (SOAR 1988)

NASA Technical Reports Server (NTRS)

Griffin, Sandy (Editor)

1988-01-01

Papers presented at the Second Annual Workshop on Space Operation Automation and Robotics (SOAR '88), hosted by Wright State University at Dayton, Ohio, on July 20, 21, 22, and 23, 1988, are documented herein. During the 4 days, approximately 100 technical papers were presented by experts from NASA, the USAF, universities, and technical companies. Panel discussions on Human Factors, Artificial Intelligence, Robotics, and Space Systems were held but are not documented herein. Technical topics addressed included knowledge-based systems, human factors, and robotics.

Twenty new ISO standards on dosimetry for radiation processing

NASA Astrophysics Data System (ADS)

Farrar, H., IV

2000-03-01

Twenty standards on essentially all aspects of dosimetry for radiation processing were published as new ISO standards in December 1998. The standards are based on 20 standard practices and guides developed over the past 14 years by Subcommittee E10.01 of the American Society for Testing and Materials (ASTM). The transformation to ISO standards using the 'fast track' process under ISO Technical Committee 85 (ISO/TC85) commenced in 1995 and resulted in some overlap of technical information between three of the new standards and the existing ISO Standard 11137 Sterilization of health care products — Requirements for validation and routine control — Radiation sterilization. Although the technical information in these four standards was consistent, compromise wording in the scopes of the three new ISO standards to establish precedence for use were adopted. Two of the new ISO standards are specifically for food irradiation applications, but the majority apply to all forms of gamma, X-ray, and electron beam radiation processing, including dosimetry for sterilization of health care products and the radiation processing of fruit, vegetables, meats, spices, processed foods, plastics, inks, medical wastes, and paper. Most of the standards provide exact procedures for using individual dosimetry systems or for characterizing various types of irradiation facilities, but one covers the selection and calibration of dosimetry systems, and another covers the treatment of uncertainties using the new ISO Type A and Type B evaluations. Unfortunately, nine of the 20 standards just adopted by the ISO are not the most recent versions of these standards and are therefore already out of date. To help solve this problem, efforts are being made to develop procedures to coordinate the ASTM and ISO development and revision processes for these and future ASTM-originating dosimetry standards. In the meantime, an additional four dosimetry standards have recently been published by the ASTM but have not yet been submitted to the ISO, and six more dosimetry standards are under development.

NACA Conference on Aircraft Loads, Structures, and Flutter

NASA Technical Reports Server (NTRS)

1957-01-01

This document contains reproductions of technical papers on some of the most recent research results on aircraft loads, flutter, and structures from the NACA laboratories. These papers were presented by members of the staff of the NACA laboratories at the Conference held at the Langley Aeronautical Laboratory March 5, 6, and 7, 1957. The primary purpose of this Conference was to convey to contractors of the military services and others concerned with the design of aircraft these recent research results and to provide those attending an opportunity to discuss the results. The papers in this document are in the same form in which they were presented at the Conference in order to facilitate their prompt distribution. The original presentation and this record are considered as complementary to, rather than as substitutes for, the Committee?s more complete and formal reports. Accordingly, if information from this document is utilized it is requested that this document not be listed as a reference. Individual reports dealing with most of the information presented at the Conference will subsequently be published by NACA and will therefore be suitable as reference material.

Technical solutions for mitigating security threats caused by health professionals in clinical settings.

PubMed

Fernandez-Aleman, Jose Luis; Belen Sanchez Garcia, Ana; Garcia-Mateos, Gines; Toval, Ambrosio

2015-08-01

The objective of this paper is to present a brief description of technical solutions for health information system security threats caused by inadequate security and privacy practices in healthcare professionals. A literature search was carried out in ScienceDirect, ACM Digital Library and IEEE Digital Library to find papers reporting technical solutions for certain security problems in information systems used in clinical settings. A total of 17 technical solutions were identified: measures for password security, the secure use of e-mail, the Internet, portable storage devices, printers and screens. Although technical safeguards are essential to the security of healthcare organization's information systems, good training, awareness programs and adopting a proper information security policy are particularly important to prevent insiders from causing security incidents.

[NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 4:] Technical communications in aerospace: An analysis of the practices reported by US and European aerospace engineers and scientists

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.; Glassman, Myron

1990-01-01

Two pilot studies were conducted that investigated the technical communications practices of U.S. and European aerospace engineers and scientists. Both studies had the same five objectives: (1) solicit opinions regarding the importance of technical communications; (2) determine the use and production of technical communications; (3) seek views about the appropriate content of an undergraduate course in technical communications; (4) determine use of libraries, information centers, and online database; (5) determine use and importance of computer and information technology to them. A self-administered questionnaire was mailed to randomly selected aerospace engineers and scientists, with a slightly modified version sent to European colleagues. Their responses to selected questions are presented in this paper.

Proceedings: International Technical Communication Conference (30th, St. Louis, Missouri, May 1-4, 1983).

ERIC Educational Resources Information Center

Society for Technical Communication, Washington, DC.

Prepared by representatives of government, business, industry, and education, the papers in this compilation deal with a variety of aspects of technical communication. The approximately 150 papers are arranged according to the following categories: advanced technology applications, graphics and production, management and professional development,…

Technical Advances and Fifth Grade Reading Comprehension: Do Students Benefit?

ERIC Educational Resources Information Center

Fountaine, Drew

This paper takes a look at some recent studies on utilization of technical tools, primarily personal computers and software, for improving fifth-grade students' reading comprehension. Specifically, the paper asks what benefits an educator can expect students to derive from closed-captioning and computer-assisted reading comprehension products. It…

Vocational Education and Training: A Major Shift in World Bank Policy.

ERIC Educational Resources Information Center

Foster, Phillip

1992-01-01

Comments on the World Bank's policy paper on vocational and technical education and training. Argues that past failures in establishing effective vocational and technical education were a result of not applying conventional neoclassical economic theory. Asserts that the World Bank's policy paper corrects this approach. (CFR)

Publications | Research Site Name | NREL

Science.gov Websites

Article Title, Journal Name (Year) Conference Paper Title, Conference Name (Year) Report Title, NREL Technical Report (Year) Topic 2 Article Title, Journal Name (Year) Conference Paper Title, Conference Name (Year) Report Title, NREL Technical Report (Year) Topic 3 Article Title, Journal Name (Year) Conference

2015-2016 Florida Adult Education Assessment Technical Assistance Paper

ERIC Educational Resources Information Center

Florida Department of Education, 2016

2016-01-01

This technical assistance paper provides guidance to individuals with test administration responsibilities in adult education programs. These policies apply to the approved assessments that programs may use to report educational gains in compliance with the National Reporting System (NRS) requirements. The NRS is the accountability system for the…

2016-2017 Florida Adult Education Assessment Technical Assistance Paper

ERIC Educational Resources Information Center

Florida Department of Education, 2017

2017-01-01

This technical assistance paper provides guidance to individuals with test administration responsibilities in adult education programs. These policies apply to the approved assessments that programs may use to report educational gains in compliance with the National Reporting System (NRS) requirements. The NRS is the accountability system for the…

Going national with HERS and EEMs: Issues and impacts. The collected papers of the national collaborative

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This collection of papers is a companion volume to A National Program for Energy-Efficient Mortgages and Home Energy Rating Systems: A Blueprint for Action (NREL/TP-261-4677). The Blueprint reports the findings and recommendations of the National Collaborative on Home Energy Rating Systems and Mortgage Incentives for Energy Efficiency about a voluntary national program linking energy-efficient mortgages and home energy rating systems. This volume provides technical documentation for A Blueprint for Action. It consists of 55 technical issue papers and 13 special papers prepared by the technical advisory committees and some members of the Collaborative Consensus Committee of the National Collaborative. Itmore » also contains the bibliography and the glossary written by the members and staff of the National Collaborative.« less

Non-technical skills of the operating theatre scrub nurse: literature review.

PubMed

Mitchell, Lucy; Flin, Rhona

2008-07-01

This paper is a report of a review to identify the non-technical (cognitive and social) skills used by scrub nurses. Recognition that failures in non-technical skills contributed to accidents in high-risk industries led to the development of research programmes to study the role of cognition and social interactions in operational safety. Recently, psychological research in operating theatres has revealed the importance of non-technical skills in safe and efficient performance. Most of the studies to date have focused on anaesthetists and surgeons. On-line sources and university library catalogues, publications of the Association for Perioperative Practice, National Association of Theatre Nurses and Association of Peri-Operative Registered Nurses were searched in 2007. Studies were included in the review if they presented data from scrub nurses on one or more of their non-technical skills. These findings were examined in relation to an existing medical non-technical skills framework with categories of communication, teamwork, leadership, situation awareness and decision-making. Of 424 publications retrieved, 13 were reviewed in detail. Ten concerned communication and eight of those also had data on teamwork. In 11 papers teamwork was examined, and one focused on nurses' situation awareness, teamwork and communication. None of the papers we reviewed examined leadership or decision-making by scrub nurses. Further work is needed to identify formally the non-technical skills which are important to the role of scrub nurse and then to design training in the identified non-technical skills during the education and development of scrub nurses.

Modeling Quantum Teleportation with Quantum Tools in Python (QuTiP)

DTIC Science & Technology

2017-12-01

FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) December 2017 2. REPORT TYPE Technical Report 3. DATES COVERED (From - To) June 1, 2017... technical report we evaluate one in particular, the Quantum Tools in Python (QuTiP) package, to determine its suitability for use in the simulation of...found that QuTiP is technically sound in that it is able to reproduce several published findings, and that it saves significant program design time due

Heat pump assisted geothermal heating system for Felix Spa, Romania

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosca, Marcel; Maghiar, Teodor

1996-01-24

The paper presents a pre-feasibility type study of a proposed heat pump assisted geothermal heating system for an average hotel in Felix Spa, Romania. After a brief presentation of the geothermal reservoir, the paper gives the methodology and the results of the technical and economical calculations. The technical and economical viability of the proposed system is discussed in detail in the final part of the paper.

Heat pump assisted geothermal heating system for Felix Spa, Romania

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosca, M.; Maghiar, T.

1996-12-31

The paper presents a pre-feasibility type study of a proposed heat pump assisted geothermal heating system for an average hotel in Felix Spa, Romania. After a brief presentation of the geothermal reservoir, the paper gives the methodology and the results of the technical and economical calculations. The technical and economical viability of the proposed system is discussed in detail in the final part of the paper.

American Chemical Society. 23rd Great Lakes Regional Meeting. Program and abstracts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-01-01

The technical program includes some 250 papers in 38 sessions, featuring 16 symposia with 99 invited speakers. Program highlights include a plenary lecture, The Origin and Consequences of Scientific Illiteracy, by Jon D. Miller. Sessions for general technical papers are scheduled in the following categories: analytical chemistry; biochemistry; inorganic chemistry; organic chemistry; and physical chemistry. Papers have been processed for inclusion on the data base.

Implementing assessments of robot-assisted technical skill in urological education: a systematic review and synthesis of the validity evidence.

PubMed

Goldenberg, Mitchell G; Lee, Jason Y; Kwong, Jethro C C; Grantcharov, Teodor P; Costello, Anthony

2018-03-31

To systematically review and synthesise the validity evidence supporting intraoperative and simulation-based assessments of technical skill in urological robot-assisted surgery (RAS), and make evidence-based recommendations for the implementation of these assessments in urological training. A literature search of the Medline, PsycINFO and Embase databases was performed. Articles using technical skill and simulation-based assessments in RAS were abstracted. Only studies involving urology trainees or faculty were included in the final analysis. Multiple tools for the assessment of technical robotic skill have been published, with mixed sources of validity evidence to support their use. These evaluations have been used in both the ex vivo and in vivo settings. Performance evaluations range from global rating scales to psychometrics, and assessments are carried out through automation, expert analysts, and crowdsourcing. There have been rapid expansions in approaches to RAS technical skills assessment, both in simulated and clinical settings. Alternative approaches to assessment in RAS, such as crowdsourcing and psychometrics, remain under investigation. Evidence to support the use of these metrics in high-stakes decisions is likely insufficient at present. © 2018 The Authors BJU International © 2018 BJU International Published by John Wiley & Sons Ltd.

Using mixed methods research designs in health psychology: an illustrated discussion from a pragmatist perspective.

PubMed

Bishop, Felicity L

2015-02-01

To outline some of the challenges of mixed methods research and illustrate how they can be addressed in health psychology research. This study critically reflects on the author's previously published mixed methods research and discusses the philosophical and technical challenges of mixed methods, grounding the discussion in a brief review of methodological literature. Mixed methods research is characterized as having philosophical and technical challenges; the former can be addressed by drawing on pragmatism, the latter by considering formal mixed methods research designs proposed in a number of design typologies. There are important differences among the design typologies which provide diverse examples of designs that health psychologists can adapt for their own mixed methods research. There are also similarities; in particular, many typologies explicitly orient to the technical challenges of deciding on the respective timing of qualitative and quantitative methods and the relative emphasis placed on each method. Characteristics, strengths, and limitations of different sequential and concurrent designs are identified by reviewing five mixed methods projects each conducted for a different purpose. Adapting formal mixed methods designs can help health psychologists address the technical challenges of mixed methods research and identify the approach that best fits the research questions and purpose. This does not obfuscate the need to address philosophical challenges of mixing qualitative and quantitative methods. Statement of contribution What is already known on this subject? Mixed methods research poses philosophical and technical challenges. Pragmatism in a popular approach to the philosophical challenges while diverse typologies of mixed methods designs can help address the technical challenges. Examples of mixed methods research can be hard to locate when component studies from mixed methods projects are published separately. What does this study add? Critical reflections on the author's previously published mixed methods research illustrate how a range of different mixed methods designs can be adapted and applied to address health psychology research questions. The philosophical and technical challenges of mixed methods research should be considered together and in relation to the broader purpose of the research. © 2014 The British Psychological Society.

Missing data and technical variability in single-cell RNA-sequencing experiments.

PubMed

Hicks, Stephanie C; Townes, F William; Teng, Mingxiang; Irizarry, Rafael A

2017-11-06

Until recently, high-throughput gene expression technology, such as RNA-Sequencing (RNA-seq) required hundreds of thousands of cells to produce reliable measurements. Recent technical advances permit genome-wide gene expression measurement at the single-cell level. Single-cell RNA-Seq (scRNA-seq) is the most widely used and numerous publications are based on data produced with this technology. However, RNA-seq and scRNA-seq data are markedly different. In particular, unlike RNA-seq, the majority of reported expression levels in scRNA-seq are zeros, which could be either biologically-driven, genes not expressing RNA at the time of measurement, or technically-driven, genes expressing RNA, but not at a sufficient level to be detected by sequencing technology. Another difference is that the proportion of genes reporting the expression level to be zero varies substantially across single cells compared to RNA-seq samples. However, it remains unclear to what extent this cell-to-cell variation is being driven by technical rather than biological variation. Furthermore, while systematic errors, including batch effects, have been widely reported as a major challenge in high-throughput technologies, these issues have received minimal attention in published studies based on scRNA-seq technology. Here, we use an assessment experiment to examine data from published studies and demonstrate that systematic errors can explain a substantial percentage of observed cell-to-cell expression variability. Specifically, we present evidence that some of these reported zeros are driven by technical variation by demonstrating that scRNA-seq produces more zeros than expected and that this bias is greater for lower expressed genes. In addition, this missing data problem is exacerbated by the fact that this technical variation varies cell-to-cell. Then, we show how this technical cell-to-cell variability can be confused with novel biological results. Finally, we demonstrate and discuss how batch-effects and confounded experiments can intensify the problem. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

A Technical Overview and Description of SOFIA (Stratospheric Observatory for Infrared Astronomy)

NASA Technical Reports Server (NTRS)

Kunz, Nans

2003-01-01

This paper provides a technical overview of SOFIA, a unique airborne observatory, from an engineering perspective. It will do this by describing several of the systems of this observatory that are common with mountain top ground based observatories but mostly emphasize those more unique features and systems that are required to facilitate world class astronomy from a highly modified Boeing 747-SP flying at Mach 0.84 in the Stratosphere. This paper provides a technical overview of SOFIA by reviewing each of the performance specifications (the level one requirements for development) and describing some of the technical advancements for the telescope as well as the platform required to achieve these performance specifications. The technical advancements involved include mirror technologies, control system features, the telescope suspension system, and the aircraft open port cavity with associated cavity door that opens in flight and tracks the telescope elevation angle. For background this paper will provide a brief programmatic overview of the SOFIA project including the joint project arrangement between the US and Germany (NASA and DLR). Additionally, this paper will describe the up to date status of the development of SOFIA as the Observatory nears the date of the first test flight in the summer of 2004.

Brazilian Federal Police drug chemical profiling - the PeQui project.

PubMed

Zacca, Jorge J; Botelho, Elvio Dias; Vieira, Maurício L; Almeida, Fernanda L A; Ferreira, Luciana S; Maldaner, Adriano O

2014-07-01

Over the past six years the Brazilian Federal Police has undertaken major efforts in order to implement and to develop its own drug chemical profiling program. This paper aims to provide a broad perspective regarding the managerial strategies and some examples of subsequent technical issues involved in the implementation of such a project. Close collaboration with local drug enforcement and investigation teams, establishment of proper worldwide partnerships with well recognized institutions in the field of drug analysis and the attainment of suitable funding and human resources are shown to be key success factors. Some preliminary results concerning the chemical profile of cocaine seizures in Brazil during this process are presented. Copyright © 2014 Forensic Science Society. Published by Elsevier Ireland Ltd. All rights reserved.

An Authoring Tool for User Generated Mobile Services

NASA Astrophysics Data System (ADS)

Danado, José; Davies, Marcin; Ricca, Paulo; Fensel, Anna

Imagine what kind of applications become possible when our mobile devices not only present data but provide valuable information to other users. Users become able to instantaneously create services and to publish content and knowledge on their own mobile device, which can be discovered and accessed remotely by other mobile users in a simple way. To achieve the vision of customizable and context aware user-generated mobile services, we present a mobile authoring tool for end-users to create, customize and deploy mobile services while on-the-go. This tool is designed to allow users with different levels of technical expertise to create mobile services. The paper also gives insight on the performed usability evaluations, namely user interviews and an online survey.

High-level user interfaces for transfer function design with semantics.

PubMed

Salama, Christof Rezk; Keller, Maik; Kohlmann, Peter

2006-01-01

Many sophisticated techniques for the visualization of volumetric data such as medical data have been published. While existing techniques are mature from a technical point of view, managing the complexity of visual parameters is still difficult for non-expert users. To this end, this paper presents new ideas to facilitate the specification of optical properties for direct volume rendering. We introduce an additional level of abstraction for parametric models of transfer functions. The proposed framework allows visualization experts to design high-level transfer function models which can intuitively be used by non-expert users. The results are user interfaces which provide semantic information for specialized visualization problems. The proposed method is based on principal component analysis as well as on concepts borrowed from computer animation.

Color management in the real world: sRGB, ICM2, ICC, ColorSync, and other attempts to make color management transparent

NASA Astrophysics Data System (ADS)

Stokes, Michael

1998-07-01

A uniformly adopted color standards infrastructure has a dramatic impact on any color imaging industry and technology. This presentation begins by framing the current color standards situation in a historical context. A series of similar appearing infrastructure adoptions in color publishing during the last fifty years are reviewed and compared to the current events. This historical review is followed by brief technical, business and marketing reviews of two of the more popular recent color standards proposals, sRGB and ICC, along with their operating system implementations in the Microsoft and Apple operating systems. The paper concludes with a summary of Hewlett- Packard Company's and Microsoft's proposed future direction.

Do You Ignore Information Security in Your Journal Website?

PubMed

Dadkhah, Mehdi; Borchardt, Glenn; Lagzian, Mohammad

2017-08-01

Nowadays, web-based applications extend to all businesses due to their advantages and easy usability. The most important issue in web-based applications is security. Due to their advantages, most academic journals are now using these applications, with papers being submitted and published through their websites. As these websites are resources for knowledge, information security is primary for maintaining their integrity. In this opinion piece, we point out vulnerabilities in certain websites and introduce the potential for future threats. We intend to present how some journals are vulnerable and what will happen if a journal can be infected by attackers. This opinion is not a technical manual in information security, it is a short inspection that we did to improve the security of academic journals.

Role of mathematics in cancer research: attitudes and training of Japanese mathematicians.

PubMed

Kudô, A

1979-10-01

An extensive survey of attitude towards scientific information of scientists in Japan was conducted in Japan. It was published in a technical report, and this survey is reviewed in this paper, with the hope that this will furnish findings important in working out the plan for promoting exploitation of mathematical talent in biomedical research. Findings are concordant with the impression of foreign visitors: (1) pure mathematicians tend to concentrate on mathematics only; (2) applied mathematics and statistics are heavily oriented toward industry; (3) mathematicians and pharmacologists are very different in their attitudes to scientific information. Based on the personal experience of the author, difficulties to be circumvented in utilizing aptitudes for mathematics and/or statistics in biomedical research are discussed.

Role of mathematics in cancer research: attitudes and training of Japanese mathematicians.

PubMed Central

Kudô, A

1979-01-01

An extensive survey of attitude towards scientific information of scientists in Japan was conducted in Japan. It was published in a technical report, and this survey is reviewed in this paper, with the hope that this will furnish findings important in working out the plan for promoting exploitation of mathematical talent in biomedical research. Findings are concordant with the impression of foreign visitors: (1) pure mathematicians tend to concentrate on mathematics only; (2) applied mathematics and statistics are heavily oriented toward industry; (3) mathematicians and pharmacologists are very different in their attitudes to scientific information. Based on the personal experience of the author, difficulties to be circumvented in utilizing aptitudes for mathematics and/or statistics in biomedical research are discussed. PMID:540605

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 40: Technical communications in aerospace education: A study of AIAA student members

NASA Technical Reports Server (NTRS)

Kennedy, John M.; Pinelli, Thomas E.; Barclay, Rebecca O.

1994-01-01

This paper describes the preliminary analysis of a survey of the American Institute of Aeronautics and Astronautics (AIAA) student members. In the paper we examine (1) the demographic characteristics of the students, (2) factors that affected their career decisions, (3) their career goals and aspirations, and (4) their training in technical communication and techniques for finding and using aerospace scientific and technical information (STI). We determine that aerospace engineering students receive training in technical communication skills and the use of STI. While those in the aerospace industry think that more training is needed, we believe the students receive the appropriate amount of training. We think that the differences between the amount of training students receive and the perception of training needs is related partially to the characteristics of the students and partially to the structure of the aerospace STI dissemination system. Overall, we conclude that the students' technical communication training and knowledge of STI, while limited by external forces, makes it difficult for students to achieve their career goals.

Technical Preparation: Preparing Students for Success. A Position Paper Presented by the Wisconsin Association of Secondary Vocational Administrators 1991-1992.

ERIC Educational Resources Information Center

Peterson, Charlene; And Others

Technical Preparation (Tech Prep) programs include basic skills and competencies to improve students' school-to-work transition. The following elements characterize Tech Prep: designed for grades 9-14, leading to an technical associate degree; parallels college preparatory program; offers technical program of study in business enterprise,…

Degrees of systematic thoroughness: A text analysis of student technical science writing

NASA Astrophysics Data System (ADS)

Esch, Catherine Julia

This dissertation investigates student technical science writing and use of evidence. Student writers attended a writing-intensive undergraduate university oceanography course where they were required to write a technical paper drawing from an instructor-designed software program, Our Dynamic Planet. This software includes multiple interactive geological data sets relevant to plate tectonics. Through qualitative text analysis of students science writing, two research questions frame the study asking: How are the papers textually structured? Are there distinctions between high- and low-rated papers? General and specific text characteristics within three critical sections of the technical paper are identified and analyzed (Observations, Interpretations, Conclusions). Specific text characteristics consist of typical types of figures displayed in the papers, and typical statements within each paper section. Data gathering consisted of collecting 15 student papers which constitute the population of study. An analytical method was designed to manage and analyze the text characteristics. It has three stages: identifying coding categories, re-formulating the categories, and configuring categories. Three important elements emerged that identified notable distinctions in paper quality: data display and use, narration of complex geological feature relationships, and overall organization of text structure. An inter-rater coding concordance check was conducted, and showed high concordance ratios for the coding of each section: Observations = 0.95; Interpretations = 0.93; and Conclusions = 0.87. These categories collectively reveal a larger pattern of general differences in the paper quality levels (high, low, medium). This variation in the quality of papers demonstrates degrees of systematic thoroughness, which is defined as how systematically each student engages in the tasks of the assignment, and how thoroughly and consistently the student follows through on that systematic commitment. Characterizations of each paper level indicate areas that can be explored to develop an explicit instructional pedagogy to support a greater number of low and medium level students. Implications suggest most students require greater explicit instruction. This involves having students pay more attention to detail, and to demonstrate greater follow through in order to produce a solid scientific argument in their technical papers.

Human Choice and CCS Deployment: What have we learned from the social sciences about CCS?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dooley, James J.

2013-08-20

It is my pleasure to present this Virtual Special Issue of key social science papers that have been published in the International Journal of Greenhouse Gas Control (IJGCC). These papers show that the social science research community has significantly advanced the state-of-the-art from vague discussions about the “acceptance of CCS” to a body of deeply insightful and actionable knowledge about how CCS is likely to be framed and how framing will impact the ultimate deployment of CCS as a means of mitigating anthropogenic climate change. The papers assembled here shed light on core issues such as how do humans makemore » decisions about a new technology like CCS that they have no direct personal experience with and what is it is about “new” technologies that we find unsettling. These papers also speak to what are the best, and for that matter the worst, ways of presenting inherently highly technical information to lay audiences, including insights about the substance of the information, the form in which the information is delivered, and who delivers it. An extended editorial about this virtual special issue is freely available on ScienceDirect. I hope you find the papers contained in this Virtual Issue to be as informative and insightful as I do.« less

[A systematic evaluation of application of the web-based cancer database].

PubMed

Huang, Tingting; Liu, Jialin; Li, Yong; Zhang, Rui

2013-10-01

In order to support the theory and practice of the web-based cancer database development in China, we applied a systematic evaluation to assess the development condition of the web-based cancer databases at home and abroad. We performed computer-based retrieval of the Ovid-MEDLINE, Springerlink, EBSCOhost, Wiley Online Library and CNKI databases, the papers of which were published between Jan. 1995 and Dec. 2011, and retrieved the references of these papers by hand. We selected qualified papers according to the pre-established inclusion and exclusion criteria, and carried out information extraction and analysis of the papers. Eventually, searching the online database, we obtained 1244 papers, and checking the reference lists, we found other 19 articles. Thirty-one articles met the inclusion and exclusion criteria and we extracted the proofs and assessed them. Analyzing these evidences showed that the U.S.A. counted for 26% in the first place. Thirty-nine percent of these web-based cancer databases are comprehensive cancer databases. As for single cancer databases, breast cancer and prostatic cancer are on the top, both counting for 10% respectively. Thirty-two percent of the cancer database are associated with cancer gene information. For the technical applications, MySQL and PHP applied most widely, nearly 23% each.

Interactive Methods of Teaching Physics at Technical Universities

ERIC Educational Resources Information Center

Krišták, L'uboš; Nemec, Miroslav; Danihelová, Zuzana

2014-01-01

The paper presents results of "non-traditional" teaching of the basic course of Physics in the first year of study at the Technical University in Zvolen, specifically teaching via interactive method enriched with problem tasks and experiments. This paper presents also research results of the use of the given method in conditions of…

32 CFR 518.21 - Collection of fees and fee rates for technical data.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AID OF CIVIL AUTHORITIES AND PUBLIC RELATIONS THE FREEDOM OF INFORMATION ACT PROGRAM Fee Schedule..., blueprints, and other technical engineering documents 2.50 Engineering data (microfilm) a. Aperture cards... mm roll film, per frame .45 d. Paper prints (engineering drawings), each 1.50 e. Paper reprints of...

The Financing of Graduate and Professional Education in Minnesota with Coordinating Board Recommendations. Staff Technical Paper.

ERIC Educational Resources Information Center

Minnesota Higher Education Coordinating Board, St. Paul.

This report provides the technical documentation and detail supporting the policy paper of the same title. The study reported here examined the relationship between various state financing policies for postsecondary education to graduate and professional education in Minnesota. Following an overview of the Coordinating Board recommendations,…

Vocational Qualifications, Employment Status and Income: 2006 Census Analysis. Technical Paper

ERIC Educational Resources Information Center

Daly, Anne

2011-01-01

Two features of the labour market for vocationally qualified workers are explored in this technical paper: the likelihood of self-employment versus wage employment and the determinants of income. The analysis showed that demographic, occupational and local labour market characteristics all influence the likelihood of self-employment. Self-employed…

Enhancing Privacy Education with a Technical Emphasis in IT Curriculum

ERIC Educational Resources Information Center

Peltsverger, Svetlana; Zheng, Guangzhi

2016-01-01

The paper describes the development of four learning modules that focus on technical details of how a person's privacy might be compromised in real-world scenarios. The paper shows how students benefited from the addition of hands-on learning experiences of privacy and data protection to the existing information technology courses. These learning…

Vocational-Technical Education; A Prospectus for Change.

ERIC Educational Resources Information Center

Schaefer, Carl J., Ed.; Kaufman, Jacob J., Ed.

To seek resolution of problems in providing education for youth and adults oriented toward the world of work, the Massachusetts Advisory Council on Education (MACE) undertook a study of vocational-technical education as a major project. This publication contains the major papers and prepared reactions to these papers, which were presented at a…

NHSA Position Paper: The Design of a Head Start Training and Technical Assistance System.

ERIC Educational Resources Information Center

NHSA Journal, 1994

1994-01-01

This position paper examines the current Head Start training and technical assistance (TTA) system and proposes specific improvements. These include the creation of regional TTA offices, the use of satellite and interactive communications technology, and a reevaluation of the role of teaching centers, national training contracts, and Head Start…

IHE cross-enterprise document sharing for imaging: design challenges

NASA Astrophysics Data System (ADS)

Noumeir, Rita

2006-03-01

Integrating the Healthcare Enterprise (IHE) has recently published a new integration profile for sharing documents between multiple enterprises. The Cross-Enterprise Document Sharing Integration Profile (XDS) lays the basic framework for deploying regional and national Electronic Health Record (EHR). This profile proposes an architecture based on a central Registry that holds metadata information describing published Documents residing in one or multiple Documents Repositories. As medical images constitute important information of the patient health record, it is logical to extend the XDS Integration Profile to include images. However, including images in the EHR presents many challenges. The complete image set is very large; it is useful for radiologists and other specialists such as surgeons and orthopedists. The imaging report, on the other hand, is widely needed and its broad accessibility is vital for achieving optimal patient care. Moreover, a subset of relevant images may also be of wide interest along with the report. Therefore, IHE recently published a new integration profile for sharing images and imaging reports between multiple enterprises. This new profile, the Cross-Enterprise Document Sharing for Imaging (XDS-I), is based on the XDS architecture. The XDS-I integration solution that is published as part of the IHE Technical Framework is the result of an extensive investigation effort of several design solutions. This paper presents and discusses the design challenges and the rationales behind the design decisions of the IHE XDS-I Integration Profile, for a better understanding and appreciation of the final published solution.

Ames Research Center Publications: A Continuing Bibliography

NASA Technical Reports Server (NTRS)

1981-01-01

The Ames Research Center Publications: A Continuing Bibliography contains the research output of the Center indexed during 1981 in Scientific and Technical Aerospace Reports (STAR), Limited Scientific and Technical Aerospace Reports (LSTAR), International Aerospace Abstracts (IAA), and Computer Program Abstracts (CPA). This bibliography is published annually in an attempt to effect greater awareness and distribution of the Center's research output.

Notes from Underground: Technical Writing and the Hermetic Tradition in Agricola's "De Re Metallica."

ERIC Educational Resources Information Center

Longo, Bernadette

The roots of technical writing are deeply planted in the field of mining engineering, with its emphasis on economics, value, and social stability. In the mid-16th century, Georgius Agricola published "De Re Metallica," a compilation of knowledge about mining and metallurgy. Agricola sought to explain the reasoning behind some of the…

Instructional Design in Technical Areas. Australian Education Review, No. 43.

ERIC Educational Resources Information Center

Sweller, John

This book details the findings from a research team that used cognitive principles and a large range of experiments to devise a variety of instructional designs. Their recommendations are based on 20 years of objective, published research. Although the program focused on technical subjects, the findings can easily be applied to a range of…

77 FR 5258 - World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP STAC or Advisory...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-02

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP STAC or Advisory Committee), National Institute for Occupational Safety and Health (NIOSH) Notice of Cancellation: This notice was published in the Federal Register on December 29,...

77 FR 8877 - World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP STAC or Advisory...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-15

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention World Trade Center Health Program Scientific/Technical Advisory Committee (WTCHP STAC or Advisory Committee), National Institute for Occupational Safety and Health (NIOSH) Correction This notice was published in the Federal Register on January 31, 2012, Volume 77,...

easyCBM® Reading Criterion Related Validity Evidence: Grades K-1. Technical Report #1309

ERIC Educational Resources Information Center

Lai, Cheng-Fei; Alonzo, Julie; Tindal, Gerald

2013-01-01

In this technical report, we present the results of a study to gather criterion-related evidence for Grade K-1 easyCBM® reading measures. We used correlations to examine the relation between the easyCBM® measures and other published measures with known reliability and validity evidence, including the Dynamic Indicators of Basic Early Literacy…

Nearshore Birds in Puget Sound

DTIC Science & Technology

2006-05-01

Published by Seattle District, U.S. Army Corps of Engineers, Seattle, Washington. Kriete, B. 2007. Orcas in Puget Sound . Puget Sound Near- shore...Technical Report 2006-05 Puget Sound Nearshore Partnership I Nearshore Birds in Puget Sound Prepared in...support of the Puget Sound Nearshore Partnership Joseph B. Buchanan Washington Department of Fish and Wildlife Technical Report 2006-05 ii

A study on technical efficiency of a DMU (review of literature)

NASA Astrophysics Data System (ADS)

Venkateswarlu, B.; Mahaboob, B.; Subbarami Reddy, C.; Sankar, J. Ravi

2017-11-01

In this research paper the concept of technical efficiency (due to Farell) [1] of a decision making unit (DMU) has been introduced and the measure of technical and cost efficiencies are derived. Timmer’s [2] deterministic approach to estimate the Cobb-Douglas production frontier has been proposed. The idea of extension of Timmer’s [2] method to any production frontier which is linear in parameters has been presented here. The estimation of parameters of Cobb-Douglas production frontier by linear programming approach has been discussed in this paper. Mark et al. [3] proposed a non-parametric method to assess efficiency. Nuti et al. [4] investigated the relationships among technical efficiency scores, weighted per capita cost and overall performance Gahe Zing Samuel Yank et al. [5] used Data envelopment analysis to assess technical assessment in banking sectors.

SeaWiFS Technical Report Series. Volume 24: SeaWiFS Technical Report Series Cumulative Index, Volumes 1-23

NASA Technical Reports Server (NTRS)

Firestone, Elaine R. (Editor); Hooker, Stanford B. (Editor)

1995-01-01

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS), which ceased operations in 1986, after an eight-year mission. SeaWiFS is expected to be launched in 1995, on the SeaStar satellite, being built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the National Aeronautics and Space Administration's (NASA) Goddard Space Flight Center (GSFC), has undertaken the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. This documentation, entitled the SeaWiFS Technical Report Series, is in the form of NASA Technical Memorandum Number 104566. All reports published are volumes within the series. This particular volume serves as a reference, or guidebook, to the previous 23 volumes and consists of 6 sections including: an errata, an addendum (summaries of various SeaWiFS Working Group Bio-optical Algorithm and Protocols Subgroups Workshops, and other auxiliary information), an index to key words and phrases, a list of all references cited, and lists of acronyms and symbols used. It is the editors' intention to publish a cumulative index of this type after every five volumes in the series. Each index covers the topics published in all previous editions, that is, each new index will include all of the information contained in the preceding indices.

SeaWiFS technical report series. Volume 24: SeaWiFS technical report series cumulative index, volumes 1-23

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor)

1995-01-01

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS), which ceased operations in 1986, after an eight-year mission. SeaWiFS is expected to be launched in 1995, on the SeaStar satellite, being built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the National Aeronautics and Space Administration's (NASA) Goddard Space Flight Center (GSFC), has undertaken the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. This documentation, entitled the SeaWiFS Technical Report Series, is the form of NASA Technical Memorandum Number 104566. All reports published are volumes within the series. This particular volume serves as a reference, or guidebook, to the previous 23 volumes and consists of 6 sections including: an errata, an addendum (summaries of various SeaWiFS Working Group Bio-optical Algorithm and Protocols Subgroups Workshops, and other auxiliary information), an index to key words and phrases, a list of all references cited, and lists of acronyms and symbols used. It is the editors' intention to publish a cumulative index of this type after every five volumes in the series. Each index covers the topics published in all previous editions, that is, each new index will include all of the information contained in the preceeding indices.

SeaWiFS technical report series. Volume 18: SeaWiFS technical report series cumulative index: Volumes 1-17

NASA Technical Reports Server (NTRS)

Firestone, Elaine R. (Editor); Hooker, Stanford B. (Editor)

1995-01-01

The Sea-viewing Wide field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS) which ceased operations in 1986 after an eight-year mission. SeaWiFS is expected to be launched in 1995 on the SeaStar satellite, being built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the National Aeronautics and Space Administration's (NASA) Goddard Space Flight Center (GSFC), has undertaken the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. This documentation, entitled the SeaWiFS Technical Report Series, is in the form of NASA Technical Memorandum Number 104566. All reports published are volumes within the series. This particular volume serves as a reference, or guidebook, to the previous 17 volumes and consists of 6 sections including: an errata, an addendum (summaries of various SeaWiFS Working Group Bio-optical Algorithm and Protocols Subgroups Workshops, and other auxiliary information), an index to key words and phrases, a list of all references cited, and lists of acronyms and symbols used. It is the editor's intention to publish a cumulative index of this type after every five volumes in the series. Each index covers the topics published in all previous editions, that is, each new index includes all of the information contained in the preceding indices.

SeaWiFS technical report series. Volume 12, SeaWiFS technical report series cumulative index: Volumes 1-11

NASA Technical Reports Server (NTRS)

Firestone, Elaine R. (Editor); Hooker, Stanford B. (Editor)

1993-01-01

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS), which ceased operations in 1986, after an 8-year mission. SeaWiFS is expected to be launched in 1994, on the SeaStar satellite, being built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the National Aeronautics and Space Administration's (NASA) Goddard Space Flight Center (GSFC) has undertaken the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. This documentation, entitled the SeaWiFS Technical Report Series, is in the form of NASA Technical Memorandum Number 104566. All reports published are volumes within the series. This particular volume serves as a reference, or guidebook, to the previous 11 volumes and consists of 6 sections including: an errata, an addendum (a summary of the SeaWiFS Working Group Bio-optical Algorithm and Protocols Subgroups Workshops), an index to keywords and phrases, a list of all references cited, and lists of acronyms and symbols used. It is the editors' intention to publish a cumulative index of this type after every five volumes in the series. This will cover the topics published in all previous editions of the indices, that is, each new index will include all of the information contained in the preceding indices.

48 CFR 742.1170-2 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-10-01

... policies, procedures, and limitations of this section do not apply to technical reports, studies, papers... section applies to USAID non-personal, professional/technical services contracts exceeding the simplified... FAR 48 CFR subpart 42.11 are compatible with the types of technical assistance contracts usually...

48 CFR 742.1170-2 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-10-01

... policies, procedures, and limitations of this section do not apply to technical reports, studies, papers... section applies to USAID non-personal, professional/technical services contracts exceeding the simplified... FAR 48 CFR subpart 42.11 are compatible with the types of technical assistance contracts usually...

48 CFR 742.1170-2 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-10-01

... policies, procedures, and limitations of this section do not apply to technical reports, studies, papers... section applies to USAID non-personal, professional/technical services contracts exceeding the simplified... FAR 48 CFR subpart 42.11 are compatible with the types of technical assistance contracts usually...

Forecasting the Future Food Service World of Work. Final Report. Volume III. Technical Papers on the Future of the Food Service Industry. Service Management Reports.

ERIC Educational Resources Information Center

Powers, Thomas F., Ed.; Swinton, John R., Ed.

This third and final volume of a study on the future of the food service industry contains the technical papers on which the information in the previous two volumes was based. The papers were written by various members of the Pennsylvania State University departments of economics, food science, nutrition, social psychology, and engineering and by…

1993 Technical Paper Contest for Women. Gear Up 2000: Women in Motion

NASA Technical Reports Server (NTRS)

Orans, Robin (Editor); Duckett, Sophie (Editor); White, Susan (Editor)

1994-01-01

The NASA Ames Research Center Advisory Committee for Women (ACW) sponsored the second ACW Technical paper Contest for Ames women in order to increase the visibility of, and to encourage writing for publication by Ames women scientists, engineers, and technicians. The topics of the contest paper mirrored in the topics of the 1993 Society for Women Engineers (SWE) National Convention, which included technological, workplace, global, and family issues.

Socio-Technical Considerations for the Use of Blockchain Technology in Healthcare.

PubMed

Wong, Ming Chao; Yee, Kwang Chien; Nøhr, Christian

2018-01-01

Blockchain technology is often considered as the fourth industrial revolution that will change the world. The enthusiasm of the transformative nature of blockchain technology has infiltrated healthcare. Blockchain is often seen as the much needed and perfect technology for healthcare, addressing the difficult and complex issues of security and inter-operability. More importantly, the "value" and trust-based system can deliver automated action and response via its smart contract mechanism. Healthcare, however, is a complex system. Health information technology (HIT) so far, has not delivered its promise of transforming healthcare due to its complex socio-technical and context sensitive interaction. The introduction of blockchain technology will need to consider a whole range of socio-technical issues in order to improve the quality and safety of patient care. This paper presents a discussion on these socio-technical issues. More importantly, this paper argues that in order to achieve the best outcome from blockchain technology, there is a need to consider a clinical transformation from "information" to "value " and trust. This paper argues that urgent research is needed to address these socio-technical issues in order to facilitate best outcomes for blockchain in healthcare. These socio-technical issues must then be further evaluated by means of working prototypes in the medical domain in coming years.

Publisher Correction: Cluster richness-mass calibration with cosmic microwave background lensing

NASA Astrophysics Data System (ADS)

Geach, James E.; Peacock, John A.

2018-03-01

Owing to a technical error, the `Additional information' section of the originally published PDF version of this Letter incorrectly gave J.A.P. as the corresponding author; it should have read J.E.G. This has now been corrected. The HTML version is correct.

Technical editing of research reports in biomedical journals.

PubMed

Wager, Elizabeth; Middleton, Philippa

2008-10-08

Most journals try to improve their articles by technical editing processes such as proof-reading, editing to conform to 'house styles', grammatical conventions and checking accuracy of cited references. Despite the considerable resources devoted to technical editing, we do not know whether it improves the accessibility of biomedical research findings or the utility of articles. This is an update of a Cochrane methodology review first published in 2003. To assess the effects of technical editing on research reports in peer-reviewed biomedical journals, and to assess the level of accuracy of references to these reports. We searched The Cochrane Library Issue 2, 2007; MEDLINE (last searched July 2006); EMBASE (last searched June 2007) and checked relevant articles for further references. We also searched the Internet and contacted researchers and experts in the field. Prospective or retrospective comparative studies of technical editing processes applied to original research articles in biomedical journals, as well as studies of reference accuracy. Two review authors independently assessed each study against the selection criteria and assessed the methodological quality of each study. One review author extracted the data, and the second review author repeated this. We located 32 studies addressing technical editing and 66 surveys of reference accuracy. Only three of the studies were randomised controlled trials. A 'package' of largely unspecified editorial processes applied between acceptance and publication was associated with improved readability in two studies and improved reporting quality in another two studies, while another study showed mixed results after stricter editorial policies were introduced. More intensive editorial processes were associated with fewer errors in abstracts and references. Providing instructions to authors was associated with improved reporting of ethics requirements in one study and fewer errors in references in two studies, but no difference was seen in the quality of abstracts in one randomised controlled trial. Structuring generally improved the quality of abstracts, but increased their length. The reference accuracy studies showed a median citation error rate of 38% and a median quotation error rate of 20%. Surprisingly few studies have evaluated the effects of technical editing rigorously. However there is some evidence that the 'package' of technical editing used by biomedical journals does improve papers. A substantial number of references in biomedical articles are cited or quoted inaccurately.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 35: The US government technical report and aerospace knowledge diffusion: Results of an on-going investigation

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Khan, A. Rahman; Barclay, Rebecca O.; Kennedy, John M.

1993-01-01

The U.S. government technical report is a primary means by which the results of federally funded research and development (R&D) are transferred to the U.S. aerospace industry. However, little is known about this information product in terms of its actual use, importance, and value in the transfer of federally funded (U.S.) R&D. To help establish a body of knowledge, the U.S. government technical report is being investigated as part of the NASA/DOD Aerospace Knowledge Diffusion Research Project. In this paper, we summarize the literature on technical reports and provide a model that depicts the transfer of federally funded aerospace R&D via the U.S. government technical report. We present results from two surveys (one of five studies) of our investigation of aerospace knowledge diffusion vis-a-vis the U.S. government technical report and close with a brief overview of on-going research into the use of the U.S. government technical report as a rhetorical device for transferring federally funded aerospace R&D.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 46: Technical communications in aerospace: A comparison across four countries

NASA Technical Reports Server (NTRS)

Kennedy, John M.; Pinelli, Thomas E.; Hecht, Laura Frye; Barclay, Rebecca O.

1995-01-01

In this paper we describe the preliminary analysis of four groups of aerospace engineering and science students -- student members of the American Institute of Aeronautics and Astronautics (AIAA) and students from universities in Japan, Russia, and Great Britain. We compare: (1) the demographic characteristics of the students; (2) factors that affected their career decision; (3) their career goals and aspirations; (4) their training in technical communication; and (5) their training in techniques for finding and using aerospace scientific and technical information (STI). Many employers in the US aerospace industry think there is a need for increased training of engineering students in technical communication. Engineers in the US and other countries believe that technical communication skills are critical for engineers' professional success. All students in our study agree about the importance of technical communication training for professional success, yet relatively few are happy with the instruction they receive. Overall, we conclude that additional instruction in technical communication and accessing STI would make it easier for students to achieve their career goals.

An English Language Curriculum for Technical Students. Practical Papers in English Education, Volume 2.

ERIC Educational Resources Information Center

Hutchinson, Tom; And Others

This curriculum for technical students aims at linking the identity of the learner, his initial linguistic and technical competence, and his expectations with the competence expected of him on entering the technical college. The materials of the curriculum make use of a wide variety of information and data sources such as school-level science…

A biosphere assessment of high-level radioactive waste disposal in Sweden.

PubMed

Kautsky, Ulrik; Lindborg, Tobias; Valentin, Jack

2015-04-01

Licence applications to build a repository for the disposal of Swedish spent nuclear fuel have been lodged, underpinned by myriad reports and several broader reviews. This paper sketches out the technical and administrative aspects and highlights a recent review of the biosphere effects of a potential release from the repository. A comprehensive database and an understanding of major fluxes and pools of water and organic matter in the landscape let one envisage the future by looking at older parts of the site. Thus, today's biosphere is used as a natural analogue of possible future landscapes. It is concluded that the planned repository can meet the safety criteria and will have no detectable radiological impact on plants and animals. This paper also briefly describes biosphere work undertaken after the review. The multidisciplinary approach used is relevant in a much wider context and may prove beneficial across many environmental contexts. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

[Contribution of Aleksander Sapieha (1773-1812) into European galvanization therapy].

PubMed

Gorski, P; Goetz, W

1996-01-01

For the development of the therapy using electricity as agent two tracks can be identified. On the one side, the indication for applying this therapy was handled more careful, simultaneously the technical equipment was improved. The Polish noble man Alexander Sapieha (1773-1812), the leading natural scientist of the Granddukedom of Warsaw, cooperated with excellent European scientists in order to improve the galvanic battery technologically. Among these scientists were Alexander Volta (1745-1827), the inventor of the battery, and Johann Bartholomaeus Trommsdorff (1770-1837), who is considered as one of the founders of scientific pharmacy in Europe. A. Sapieha supported the publication of galvanic experiences, e.g. in the case of Alexander of Humboldt (1769-1859) by publishing his paper about electric fishes. Sapiehas connections with the scientific centers in Turin and Bologna, Erfurt, Warszaw and Paris accelerated the exchange of information about galvanism. Later the resulting mini-batteries were employed in diathermie, in defibrillators and pacemakers. Details about these connections are presented in the lecture resp. full paper.

The international development of forensic science standards - A review.

PubMed

Wilson-Wilde, Linzi

2018-04-16

Standards establish specifications and procedures designed to ensure products, services and systems are safe, reliable and consistently perform as intended. Standards can be used in the accreditation of forensic laboratories or facilities and in the certification of products and services. In recent years there have been various international activities aiming at developing forensic science standards and guidelines. The most significant initiative currently underway within the global forensic community is the development of International Organization for Standardization (ISO) standards. This paper reviews the main bodies working on standards for forensic science, the processes used and the implications for accreditation. This paper specifically discusses the work of ISO Technical Committee TC272, the future TC272 work program for the development of forensic science standards and associated timelines. Also discussed, are the lessons learnt to date in navigating the complex environment of multi-country stakeholder deliberations in standards development. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.

Saudi Arabia: A future regional hub for advanced education, research, science and technology.

PubMed

Meo, Sultan Ayoub

2015-10-01

Saudi Arabia is the largest country of the Arabian Peninsula, blessed with significant natural resources, including oil, gas and minerals. Saudi Arabia has recognised the importance of education in social and economic transformation, and has established a large number of universities, research and advanced technical institutes which have broken the metropolitan boundaries and have been extended to the far-flung areas of the country. There are 68 universities and degree-awarding institutes. The educational budget reached its highest-ever level of $56.56 billion for the year 2014. About 124,000 Saudi students are pursuing higher education in about 500 universities around the world. Saudi Arabia produced 177826 research papers in Institute for Scientific Information (ISI) database and in the year 2014 alone, 26168 research papers were published in indexed science journals with a rising h-index of 144. The country is turning into a regional hub for advanced education, research, science and technology while swiftly shifting from an oil-based to a knowledge-based economy.

White paper report of the 2011 RAD-AID Conference on International Radiology for Developing Countries: integrating multidisciplinary strategies for imaging services in the developing world.

PubMed

Everton, Kathryn L; Mazal, Jonathan; Mollura, Daniel J

2012-07-01

The 2011 RAD-AID Conference on International Radiology for Developing Countries discussed data, experiences, and models pertaining to radiology in the developing world, where widespread shortages of imaging services significantly reduce health care quality and increase health care disparities. This white paper from the 2011 RAD-AID conference represents consensus advocacy of multidisciplinary strategies to improve the planning, accessibility, and quality of imaging services in the developing world. Conference presenters and participants discussed numerous solutions to imaging and health care disparities, including (1) economic development for radiologic service planning, (2) public health mechanisms to address disease and prevention at the population and community levels, (3) comparative clinical models to implement various clinical and workflow strategies adapted to unique developing world community contexts, (4) education to improve training and optimize service quality, and (5) technology innovation to bring new technical capabilities to limited-resource regions. Published by Elsevier Inc.

From education to occupation: the story of Thomas Bessell Kidner.

PubMed

Friedland, Judith; Davids-Brumer, Naomi

2007-02-01

Thomas Bessell Kidner is well-known in the United States as a great contributor to occupational therapy. He is not well-known in Canada despite the fact that his first contributions to the profession were made here between 1900 and 1918. To tell the story of Thomas Bessell Kidner and his impact on occupational therapy. Interpretive biography research methods using archival materials, published papers and family papers. Kidner's work as an organizer of manual training in elementary schools in Nova Scotia and New Brunswick and as Director of Technical Education for Calgary prepared him for his work as Vocational Secretary of the Military Hospitals Commission during World War I. Kidner developed, implemented and oversaw the reeducation program for injured soldiers across Canada. It included bedside occupations, off-ward and curative workshop activities provided by ward aides, as well as industrial training and apprenticeships in the workplace. Kidner's story stimulates us to revisit our profession's early emphasis on return-to-work. Knowing about our past helps occupational therapists to build a stronger identity.

Financing Technical and Vocational Education: Modalities and Experiences.

ERIC Educational Resources Information Center

German Foundation for International Development (DSE), Bonn (Germany).

The two papers in this document explain various options and modalities for UNEVOC (International Project on Technical and Vocational Education) Member States' financing of their individual systems of technical and vocational education and disseminating experiences in this area. "Financing Vocational Education and Training in Developing…

Mentoring models in neurosurgical training: Review of literature.

PubMed

Akhigbe, Taiwo; Zolnourian, Ardalan; Bulters, Diederik

2017-11-01

Effective mentoring is an invaluable element in the development of next generation of neurosurgeons. A mentor helps to develop professional core values, technical and non-technical skills, attitudes and disposition required to be qualified and competent neurosurgeon. Giving the invaluable significance of mentoring in neurosurgery, we undertook this literature review to identify mentoring models evaluating its success and relative benefit. Literature search identified using MeSH word 'mentor', mentoring, mentorship, mentoring model, neurosurgery' in MEDLINE, EMBASE and Scopus databases from 1990 to 2016. Literature reviewed to identify status of mentoring in neurosurgery, potential barriers, pitfalls and future framework for mentoring in neurosurgery. Additional articles identified through manual search of reference lists. A total of 247 studies were obtained from electronic databases, after removing duplicates, abstracts, letters to the editor and non-neurosurgery papers. Sixteen full text articles retrieved out of which five met the inclusion criteria. Generally, there is paucity of articles regarding mentoring in neurosurgery, all included papers were written in English Language, all of them described mentoring model used including simulation, distance, collaborative, facilitative tele-mentoring and peer mentoring. Mentoring in Neurosurgery is an important aspect of personal and professional development of neurosurgical trainees, currently there is decline in traditional apprenticeship due to increase demand for modern use of specialised technology, simulation and tele-medicine in neurosurgery practice. Effective and efficient mentoring will be an interplay of six mentoring models (collaborative, facilitative, distance, simulation, tele mentoring and peer mentoring) identified. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Impact of Satellite Atmospheric Motion Vectors In the GMAO GEOS-5 Global Data Assimilation System

NASA Technical Reports Server (NTRS)

Gelaro, Ronald; Merkova, Dagmar

2012-01-01

The WMO and THORPEX co-sponsored fifth Workshop on the Impact of Various Observing Systems on Numerical Weather Prediction will be organized by the Expert Team on the Evolution of the Global Observing System in Sedona, Arizona, United States, from 22 to 25 May 2012. Participants are expected to come from all the major NWP centres which are active in the area of impact studies. The workshop will be conducted in English. As for the first four workshops it is planned to produce a workshop report to be published as a WMO Technical Report that will include the papers submitted by the participants. The previous four workshops in this series took place in Geneva {April 1997), Toulouse (March 2000), Alpbach (March 2004) and Geneva (May 2008). Results from Observing System Experiments (OSEs), both with global and regional aspects were presented and conclusions were drawn concerning the contributions of the various components of the observing system to the large scale forecast skill at short and medium range (Workshop Proceedings were published as WMO World Weather Watch Technical Reports TD No. 868, 1034, 1228 and 1450). Since then, some significant changes and developments have affected the global observing system and more efforts have been devoted to meso-scale observing and assimilation systems. There has also been a trend toward using techniques other than OSEs to document data impact, such as adjoint-based sensitivity to observations or ensemble-based sensitivity. Field experiments have been carried out, in particular through the THORPEX project, and the use of targeted data has been assessed.

The next three decades of the comet assay: a report of the 11th International Comet Assay Workshop.

PubMed

Koppen, Gudrun; Azqueta, Amaya; Pourrut, Bertrand; Brunborg, Gunnar; Collins, Andrew R; Langie, Sabine A S

2017-05-01

The International Comet Assay Workshops are a series of scientific conferences dealing with practical and theoretical aspects of the Comet Assay (single-cell gel electrophoresis)-a simple method for detecting DNA strand breaks. The first paper describing such an assay was published over 30 years ago in 1984 by Swedish researchers O. Ostling and K. J. Johanson. Appropriately, the theme for the 2015 meeting was looking to the future: 'The Next 3 Decades of the Comet Assay'. The programme included 25 oral and 43 poster presentations depicting the latest advances in technical developments as well as applications of the comet assay in genotoxicity testing (in vitro and in vivo) and biomonitoring of both humans and the environment. Open discussion sessions based on questions from the participants allowed exchange of practical details on current comet assay protocols. This report summarises technical issues of high importance which were discussed during the sessions. We provide information on ways to improve the assay performance, by testing for cytotoxicity, by using reference samples to reduce or allow for inter-experimental variation, and by standardising quantification of the damage, including replicates and scoring enough comets to ensure statistical validity. After 30 years of experimentation with the comet assay, we are in a position to control the important experimental parameters and make the comet assay a truly reliable method with a wealth of possible applications. © The Author 2017. Published by Oxford University Press on behalf of the UK Environmental Mutagen Society. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Librarians and Scientists Partner to Address Data Management: Taking Collaboration to the Next Level.

PubMed

Medina-Smith, Andrea; Tryka, Kimberly A; Silcox, Barbara P; Hanisch, Robert J

2016-01-01

This study looks at the changing way in which the Information Services Office (ISO) at the National Institute of Standards and Technology (NIST) provides services to NIST scientific and technical staff throughout their research and publishing cycles. These services include the more traditional services of a research library as well as publishing NIST technical reports and The Journal of Research of NIST , and preserving and exhibiting scientific instruments and other artifacts. ISO has always prided itself on having a close relationship with its customers, providing a high level of service, and developing new services to stay in front of NIST researcher needs. Through a concerted, strategic effort since the late 1990s, ISO has developed and promoted relationships with its key customers through its Lab Liaison Program. This paper discusses the relationship ISO has developed with the Office of Data and Informatics (ODI), how this relationship was forged, and how this collaboration will serve as a model for working with the other labs and programs at NIST. It will also discuss the risks and opportunities of this new collaborative service model, how ISO positioned itself to become an equal partner with ODI in the exploration of solutions to data management issues, and the benefits of the relationship from ODI's perspective. A pattern of strategic changes to the services and activities offered by the Lab Liaison program has put ISO in the position to collaborate as peers with researchers at NIST. This study provides an overview of how ISO made strategic decisions to incorporate non-traditional services to support data management at NIST.

Development and implementation of a technical and didactical training program for student tutors in the dissection course.

PubMed

Shiozawa, Thomas; Hirt, Bernhard; Celebi, Nora; Baur, Friederike; Weyrich, Peter; Lammerding-Köppel, Maria

2010-12-20

student tutors have a long tradition in gross anatomy instruction. However, the full potential of the tutors is generally not tapped, since little attention is paid to their technical and didactical training. The aim of this paper is to report a systematic approach to the development, didactic reasoning and implementation of a curriculum for training student tutors in gross anatomy. the training program was developed using the six-step approach of Kern's curriculum development model. For needs assessment, the literature research was amended by a survey among the 1st and 2nd year students of the dissection course (n=167) and two independent 90 min focus group interviews with the tutors who supervised these students (n=15). Protocols were transcribed and analyzed by margin coding. The training curriculum was setup on the basis of these data. corresponding to the literature, the students want student tutors with good teaching competence as well as adequate content knowledge and technical competence. Supporting that, the tutors request a training program enhancing their didactic skills as well as their knowledge of content and working using relevant methods. Thus, a combined didactic and professional training program has been developed. Six professional and 11 didactic learning objectives were defined. A 3 weeks training curriculum was implemented, using microteaching and group exercises for didactics and active dissection for technical training. Both parts were interlocked on a contextual and practical level. our focus group analyses revealed that a specific training program for student tutors in the dissection course is necessary. We describe a feasible task-oriented training curriculum combining didactic and professional objectives. 2010. Published by Elsevier GmbH.

Collected Papers Prepared Under Work Unit TEXTRUCT: Methods of Instruction in Technical Training.

ERIC Educational Resources Information Center

Human Resources Research Organization, Alexandria, VA.

Although the concept of automated instruction is not new, it has gained major support only in the past 3 years. These 12 papers describe research in the area of instructional methods for technical training. The scientific principles of learning and their applicability to automated instruction are discussed, with emphasis on the role of automated…

Using wood composites as a tool for sustainable forestry

Treesearch

Jerrold E. Winandy; Robert W. Wellwood; Salim Hiziroglu

2005-01-01

This report provides a summary of technical papers presented in Session #90 of the recent IUFRO XXII World Forestry Congress held in Brisbane, Queensland, Australia, August 8–13, 2005. Papers in this report include the oral presentations, poster presentations, and panel discussions exploring and providing technical information on the potential adaptability and...

English for Speakers of Other Languages (ESOL) and Citizenship Programs. Technical Assistance Paper.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Workforce Development.

This technical assistance paper is designed to help local adult education administrators and teachers in Florida as they implement changes in the Adult English for Speakers of Other Languages (ESOL) Program Curriculum Framework, which provides the state with a minimum set of standards to be used by all facilities delivering ESOL citizenship…

A Pox on Pithy Prescriptions. CDC Technical Report No. 9.

ERIC Educational Resources Information Center

Steinberg, Erwin R.

Intended for writing teachers, this paper shows how "pithy prescriptions" for writing, such as "use definite, specific, concrete language," can be misleading or wrong. To support this thesis, the paper examines a technical writing book advocating short sentences and finds that it has sentences averaging 27.8 words in one section and 30.18 in…

Determinants of Entrepreneurial Intentions: Technical-Vocational Education and Training Students in Ethiopia

ERIC Educational Resources Information Center

Buli, Bereket Mamo; Yesuf, Wasihun Mohammed

2015-01-01

Purpose: The purpose of this paper is to examine factors that could explain the difference in entrepreneurial intention (EI) among technical-vocational education and training (TVET) program students. Centered on the theory of planned behavior (TPB), the paper aims to contribute to the understanding of factors that affect EIs of students and offer…

Teachers' Perceptions and Students' Lived Experiences in Vocational-Technical Subjects in a Rural High School in Zimbabwe

ERIC Educational Resources Information Center

Masinire, Alfred

2015-01-01

This paper explores the construction of dominant models of gender among students in the Vocational-Technical. In the backdrop of dominant narratives that structure gender policies and practices in schooling in Zimbabwe, the paper elaborates upon how students' daily experiences in workrooms perpetuate the feminisation and masculinisation of fields…

Metric Education; A Position Paper for Vocational, Technical and Adult Education.

ERIC Educational Resources Information Center

Cooper, Gloria S.; And Others

Part of an Office of Education three-year project on metric education, the position paper is intended to alert and prepare teachers, curriculum developers, and administrators in vocational, technical, and adult education to the change over to the metric system. The five chapters cover issues in metric education, what the metric system is all…

Integration of gas chromatographs into the Federal Highway Administration/Environmental Protection Agency near road MSAT study in Las Vegas, NV

EPA Science Inventory

This paper documents the technical evaluation of a semi-continuous gas chromatograph (GC) for the measurement of benzene and 1,33butadiene in the near road environment. This paper will also consider the some of the non-technical implications associated with the operation of a GC ...

Desktop Publishing on the Macintosh: A Software Perspective.

ERIC Educational Resources Information Center

Devan, Steve

1987-01-01

Discussion of factors to be considered in selecting desktop publishing software for the Macintosh microcomputer focuses on the two approaches to such software, i.e., batch and interactive, and three technical considerations, i.e., document, text, and graphics capabilities. Some new developments in graphics software are also briefly described. (MES)

A Response to Stewart, McElwee, and Ming

ERIC Educational Resources Information Center

Martin, Garry L.; Yu, C. T.

2010-01-01

In a recent article published in "The Behavior Analyst," Stewart, McElwee, and Ming (2010) suggested that "scientific experts in scientific contexts" should use more "technically accurate and precise labeling" when describing the Assessment of Basic Learning Abilities (ABLA) in published articles. They concluded by stating, "We believe that…

Towards technical interoperability in telemedicine.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Craft, Richard Layne, II

2004-05-01

For telemedicine to realize the vision of anywhere, anytime access to care, the question of how to create a fully interoperable technical infrastructure must be addressed. After briefly discussing how 'technical interoperability' compares with other types of interoperability being addressed in the telemedicine community today, this paper describes reasons for pursuing technical interoperability, presents a proposed framework for realizing technical interoperability, identifies key issues that will need to be addressed if technical interoperability is to be achieved, and suggests a course of action that the telemedicine community might follow to accomplish this goal.

Minimally Invasive Implantable Fetal Micropacemaker: Mechanical Testing and Technical Refinements

PubMed Central

Zhou, Li; Vest, Adriana N.; Peck, Raymond A.; Sredl, Jonathan P.; Huang, Xuechen; Bar-Cohen, Yaniv; Silka, Michael J.; Pruetz, Jay D.; Chmait, Ramen H.; Loeb, Gerald E.

2016-01-01

This paper discusses the technical and safety requirements for cardiac pacing of a human fetus with heart failure and hydrops fetalis secondary to complete heart block. Engineering strategies to meet specific technical requirements were integrated into a systematic design and implementation consisting of a novel fetal micropacemaker, a percutaneous implantation system, and a sterile package that enables device storage and recharging maintenance in a clinical setting. We further analyzed observed problems on myocardial fixation and pacing lead fatigue previously reported in earlier preclinical trials. This paper describes the technical refinements of the implantable fetal micropacemaker to overcome these challenges. The mechanical performance has been extensively tested to verify the improvement of reliability and safety margins of the implantation system. PMID:27021067