The Effect of Career and Technical Education on Human Capital Accumulation: Causal Evidence from Massachusetts

ERIC Educational Resources Information Center

Dougherty, Shaun M.

2018-01-01

Earlier work demonstrates that career and technical education (CTE) can provide long-term financial benefits to participants, yet few have explored potential academic impacts, with none in the era of high-stakes accountability. This paper investigates the causal impact of participating in a specialized high school-based CTE delivery system on high…

NASA Scientific and Technical Publications: A Catalog of Special Publications, Reference Publications, Conference Publications, and Technical Papers 1991-1992

DTIC Science & Technology

1993-02-01

Scientific and Technical Information EXOBIOLOGY. HEALTH. MICROBIOLOGY . MICROOR- System during September 1990. Subject coverage includes: GANISMS...Houston. TX N91-24731 National Aeronautics and Space Administration. MICROBIOLOGY ON SPACE STATION FREEDOM Washington, DCr DUANE L. PIERSON, ed...and solution INASA-SP-7011(345)) p 37 N91-16547 Beyond the Baseline 1991ý Proceedings of the Space [NASA-TP-3242) p 43 N92-33483 Microbiology on Space

ICT and Knowledge Construction: Towards New Features for the Socio-Technical Approach

ERIC Educational Resources Information Center

Cartelli, Antonio

2007-01-01

Purpose: The purpose of this paper is to provide an analysis and review of the sociotechnical approach as a result of analysis of experiences with the introduction of ICT in higher education. Design/methodology/approach: The experiences of the author with the creation of special web sites in palaeography are analysed paying special attention to…

Report of the California Community College Special Populations Advisory Committee: Recommendations for the State Plan for Vocational Education.

ERIC Educational Resources Information Center

California Community Colleges, Sacramento. Office of the Chancellor.

This paper offers the definition of the term "special populations" that appears in Section 3 of the Carl D. Perkins Vocational-Technical Education Act of 1998: (1) individuals with disabilities; (2) individuals from economically disadvantaged families, including foster children; (3) individuals preparing for nontraditional training and…

Science and Technology Libraries Section. Special Libraries Division. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations, The Hague (Netherlands).

Papers on scientific/technical information and libraries, which were presented at the 1983 International Federation of Library Associations (IFLA) conference, include: (1) "Patents as Information--An Unused Resource" by Richard D. Walker (United States); (2) "Survey of the Information Services of the Library of the German Patent…

41 CFR 105-50.001-5 - Specialized or technical services.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., technical tests and evaluations, technical information, training activities, surveys, reports, documents... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Specialized or technical... TECHNICAL SERVICES TO STATE AND LOCAL UNITS OF GOVERNMENT § 105-50.001-5 Specialized or technical services...

Research and application of self - propagating welding technology

NASA Astrophysics Data System (ADS)

Ma, Yunhe; Li, Zhizun; Wang, Jianjiang; Sun, Liming

2018-04-01

Self-propagating welding is an important application area of self-propagating high-temperature synthesis technology (SHS technology), suitable for special environment and special materials welding. This paper briefly introduces the principle of self - propagating welding and its technical characteristics, and briefly summarizes the current research and application of SHS welding around three aspects of thin film welding, welding of refractory welding and emergency welding of battlefield.

The National Rural Alcohol and Drug Abuse Network Awards for Excellence 2004: Submitted and Award-Winning Papers. Technical Assistance Publication Series (TAP) 28

ERIC Educational Resources Information Center

Substance Abuse and Mental Health Services Administration, 2006

2006-01-01

This TAP presents seven papers submitted to the 2004 National Rural Alcohol and Drug Abuse Network (NRADAN) Awards for Excellence. Each paper describes effective and innovative models of treatment and prevention services in rural populations. This publication seeks to promote and showcase research addressing the unique and special challenges of…

From Mining Innovations to Sustainable Development: Keynote Speakers of the First to the Second International Innovative Mining Symposium

NASA Astrophysics Data System (ADS)

Cehlár, Michal; Janočko, Juraj; Demirel, Nuray; Anyona, Seroni; Vöth, Stefan; Tyulenev, Maxim; Zhironkin, Sergey

2017-11-01

24-26 April, 2017 the Scientific Practical Conference "International Innovative Mining Symposium (in memory of Prof. Vladimir Pronoza)" was successfully organized at T.F. Gorbachev Kuzbass State Technical University - KuzSTU (Kemerovo Russia). More than 20 participants submitted their papers in presence, and more than 40 authors sent their papers for virtual participation. The main participants of the conference - Keynote Speakers - paid special attention to the development of international cooperation of technical universities as a form of accelerating the transfer of innovations in mineral resources mining and processing.

IFLA General Conference, 1985. Division on Special Libraries. Section on Social Science Libraries and Geography and Map Libraries. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations, The Hague (Netherlands).

Papers presented on social science and map and geography libraries at the 1985 International Federation of Library Associations (IFLA) conference include: (1) "Information for the Developing World: NTIS's (National Technical Information Service) Role in Information Transfer to Developing Countries" (Joseph F. Caponio, United States); (2)…

Mutual Learning for Sustainability: Relationships between the Technical University of Catalonia (UPC) and Regional Centre of Expertise (RCE) Barcelona from a Systems Perspective

ERIC Educational Resources Information Center

Ferrer-Balas, D.; Buckland, H.

2008-01-01

Purpose: The purpose of this paper is to explore the relationship between the Technical University of Catalonia (UPC) and RCE-Barcelona in the context of two organisations with a strategic aim to further Education for Sustainable Development. A special emphasis is put in the role that UPC has had in the creation and development of this project,…

[High voltage objects and radiocommunication investments in view of requirements of the environmental protection act].

PubMed

Szuba, Marek

2006-01-01

This paper presents the most important elements of the localization procedure of high voltage overhead lines and substations and radiocommunication objects which are the source of electromagnetic fields. These fields are perceived as a major threat to human health. The point of departure to make a choice of investments is the special classification of technical installations described in one of the executive directive issued by virtue of the Environmental Protection Act. This special executive directive enumerates a lot of technical objects (installation), classified in the group of investments which have significant impact on the environment and some objects which could be classified in this group. For all this technical installations (e.g., overhead high voltage power lines) the provisions of the Environmental Protection Act impose an obligation to take particular steps to assure transparency of the environmental protection procedures, transborder procedures and the protection of areas included in the Natura 2000 network.

Vaccine procurement and self-sufficiency in developing countries.

PubMed

Woodle, D

2000-06-01

This paper discusses the movement toward self-sufficiency in vaccine supply in developing countries (and countries in transition to new economic and political systems) and explains special supply concerns about vaccine as a product class. It traces some history of donor support and programmes aimed at self-financing, then continues with a discussion about self-sufficiency in terms of institutional capacity building. A number of deficiencies commonly found in vaccine procurement and supply in low- and middle-income countries are characterized, and institutional strengthening with procurement technical assistance is described. The paper also provides information about a vaccine procurement manual being developed by the United States Agency for International Development (USAID) and the World Health Organization (WHO) for use in this environment. Two brief case studies are included to illustrate the spectrum of existing capabilities and different approaches to technical assistance aimed at developing or improving vaccine procurement capability. In conclusion, the paper discusses the special nature of vaccine and issues surrounding potential integration and decentralization of vaccine supply systems as part of health sector reform.

Introduction to special section on The U.S. IOOS Coastal and Ocean Modeling Testbed

NASA Astrophysics Data System (ADS)

Luettich, Richard A.; Wright, L. Donelson; Signell, Richard; Friedrichs, Carl; Friedrichs, Marjy; Harding, John; Fennel, Katja; Howlett, Eoin; Graves, Sara; Smith, Elizabeth; Crane, Gary; Baltes, Rebecca

2013-12-01

Strong and strategic collaborations among experts from academia, federal operational centers, and industry have been forged to create a U.S. IOOS Coastal and Ocean Modeling Testbed (COMT). The COMT mission is to accelerate the transition of scientific and technical advances from the coastal and ocean modeling research community to improved operational ocean products and services. This is achieved via the evaluation of existing technology or the development of new technology depending on the status of technology within the research community. The initial phase of the COMT has addressed three coastal and ocean prediction challenges of great societal importance: estuarine hypoxia, shelf hypoxia, and coastal inundation. A fourth effort concentrated on providing and refining the cyberinfrastructure and cyber tools to support the modeling work and to advance interoperability and community access to the COMT archive. This paper presents an overview of the initiation of the COMT, the findings of each team and a discussion of the role of the COMT in research to operations and its interface with the coastal and ocean modeling community in general. Detailed technical results are presented in the accompanying series of 16 technical papers in this special issue.

FUNDAMENTALS OF TELEVISION SYSTEMS.

ERIC Educational Resources Information Center

KESSLER, WILLIAM J.

DESIGNED FOR A READER WITHOUT SPECIAL TECHNICAL KNOWLEDGE, THIS ILLUSTRATED RESOURCE PAPER EXPLAINS THE COMPONENTS OF A TELEVISION SYSTEM AND RELATES THEM TO THE COMPLETE SYSTEM. SUBJECTS DISCUSSED ARE THE FOLLOWING--STUDIO ORGANIZATION AND COMPATIBLE COLOR TELEVISION PRINCIPLES, WIRED AND RADIO TRANSMISSION SYSTEMS, DIRECT VIEW AND PROJECTION…

2012 Special NSREC Issue of the IEEE Transactions on Nuclear Science Comments by the Editors

NASA Astrophysics Data System (ADS)

Schwank, Jim; Brown, Dennis; Girard, Sylvain; Gouker, Pascale; Gerardin, Simone; Quinn, Heather; Barnaby, Hugh

2012-12-01

The December 2012 special issue of the IEEE Transactions on Nuclear Science contains selected papers from the 49th annual IEEE International Nuclear and Space Radiation Effects Conference (NSREC) held July 16-20, 2012, in Miami, Florida USA. 95 papers presented at the 2012 NSREC were submitted for consideration for this year’s special issue. Those papers that appear in this special issue were able to successfully complete the review process before the deadline for the December issue. A few additional papers may appear in subsequent issues of the TRANSACTIONS. This publication is the premier archival journal for research on space and nuclear radiation effects in materials, devices, circuits, and systems. This distinction is the direct result of the conscientious efforts of both the authors, who present and document their work, and the reviewers, who selflessly volunteer their time and talent to help review the manuscripts. Each paper in this journal has been reviewed by experts selected by the editors for their expertise and knowledge of the particular subject areas. The peer review process for a typical technical journal generally takes six months to one year to complete. To publish this special issue of the IEEE Transactions on Nuclear Science (in December), the review process, from initial submission to final form, must be completed in about 10 weeks. Because of the short schedule, both the authors and reviewers are required to respond very quickly. The reviewers listed on the following pages contributed vitally to this quick-turn review process.We would like to express our sincere appreciation to each of them for accepting this difficult, but critical role in the process. To provide consistent reviews of papers throughout the year, the IEEE Transactions on Nuclear Science relies on a year-round editorial board that manages reviews for submissions throughout the year to the TRANSACTIONS in the area of radiation effects. The review process is managed by a Senior Editor and six Associate Editors who are technically knowledgeable in one or more specializations and are experienced in the publication process. This editorial process works very well. With twice the number of editors as previously used for overseeing the review process, each editor is able to devote more time to individual papers.

Effect of using of IEEJ (Power and Energy) Technical Papers on Engineering Education

NASA Astrophysics Data System (ADS)

Shirakawa, Shingo

The IEEJ has published useful papers for electric power and energy systems. These papers published in IEEJ transactions contribute to special engineers to receive the doctor degree or understand newly developed technologies etc. But, it is very important to know the impression of young students about IEEJ transactions papers considering the technology transfer. This paper describes reaction comments of next generation university students under learning engineering of design and drawing of power equipments in 2009 after the Lehman Shock (the Lehman Brothers' worldwide economical collapse dated Sept. 15 2008).

Lightning Phenomenology

NASA Astrophysics Data System (ADS)

Kawasaki, Zen

This paper presents a phenomenological idea about lightning flash to share the back ground understanding for this special issue. Lightning discharges are one of the terrible phenomena, and Benjamin Franklin has led this natural phenomenon to the stage of scientific investigation. Technical aspects like monitoring and location are also summarized in this article.

Technical Challenges of Enterprise Imaging: HIMSS-SIIM Collaborative White Paper.

PubMed

Clunie, David A; Dennison, Don K; Cram, Dawn; Persons, Kenneth R; Bronkalla, Mark D; Primo, Henri Rik

2016-10-01

This white paper explores the technical challenges and solutions for acquiring (capturing) and managing enterprise images, particularly those involving visible light applications. The types of acquisition devices used for various general-purpose photography and specialized applications including dermatology, endoscopy, and anatomic pathology are reviewed. The formats and standards used, and the associated metadata requirements and communication protocols for transfer and workflow are considered. Particular emphasis is placed on the importance of metadata capture in both order- and encounter-based workflow. The benefits of using DICOM to provide a standard means of recording and accessing both metadata and image and video data are considered, as is the role of IHE and FHIR.

Proceedings of the American Vocational Education Research Association (San Diego, California, December 7-10, 2000).

ERIC Educational Resources Information Center

2000

The following 14 papers, with abstracts and references, are compiled in this conference proceedings: "Exploring the Roles and Duties of Vocational Special Needs Educators" (Melanie Fagert); "Professional Competencies for Provisionally Licensed Career and Technical Education Teachers in Virginia" (Betty Heath-Camp, Daisy L.…

Planning and Development of Lab Training Activities for Powerline Communications

ERIC Educational Resources Information Center

Drosopoulos, A.; Hatziprokopiou, M.

2010-01-01

This paper discusses the planning and development of student training and activities for the Powerline Communications Laboratory at the Technical Education Institute (TEI), Patras, Greece. Powerline communications is currently an active area of research and development that combines three separate specializations from the standard training of…

The role of remote sensing observations and models in hydrology: The science of evapotranspiration

USGS Publications Warehouse

Nagler, Pamela

2011-01-01

ensuing years. These advances can be attributed largely to three convergent themes: 1) technical innovation; 2) synergy between disciplines; and 3) expressed need. The papers in this special issue address all of these three themes on remote sensing methods for ET estimation.

The National Shipbuilding Research Program, Proceedings of the REAPS Technical Symposium Paper No. 6: SPADES System Current Developments

DTIC Science & Technology

1976-06-01

and End-Cuts Program ( PLEC ). A special program to aid in fabrication of complex three-dimensional pipe structures, which is of special interest to...LENGTH AND END-CUTS PROGRAM ( PL E C) PROGRAM DESCRIPTION 1. PROGRAM CAPABILITIES The Pipe Length and End- Cuts ( PLEC ) Development Program allows the...required categories: a. Definition Input This type of input by the ’ PLEC ’ Program can be divided in two is used to define a three-dimensional structure

The Second Annual International Space University Alumni Conference

NASA Technical Reports Server (NTRS)

Johnson, Les (Compiler); Robinson, Paul A. (Compiler)

1994-01-01

The papers presented at the conference reflect the multidisciplinary nature of the International Space University (ISU) and its alumni. The first papers presented hold special relevance to the design projects, and cover such topics as lunar-based astronomical instrumentation, solar lunar power generation, habitation on the moon, and the legal issues governing multinational astronauts conducting research in space. The next set of papers cover various technical issues such as project success assessment, satellite networks and space station dynamics, thus reflecting the diverse backgrounds of the ISU alumni.

The analysis of thermoplastic characteristics of special polymer sulfur composite

NASA Astrophysics Data System (ADS)

Książek, Mariusz

2017-01-01

Specific chemical environments step out in the industry objects. Portland cement composites (concrete and mortar) were impregnated by using the special polymerized sulfur and technical soot as a filler (polymer sulfur composite). Sulfur and technical soot was applied as the industrial waste. Portland cement composites were made of the same aggregate, cement and water. The process of special polymer sulfur composite applied as the industrial waste is a thermal treatment process in the temperature of about 150-155°C. The result of such treatment is special polymer sulfur composite in a liquid state. This paper presents the plastic constants and coefficients of thermal expansion of special polymer sulfur composites, with isotropic porous matrix, reinforced by disoriented ellipsoidal inclusions with orthotropic symmetry of the thermoplastic properties. The investigations are based on the stochastic differential equations of solid mechanics. A model and algorithm for calculating the effective characteristics of special polymer sulfur composites are suggested. The effective thermoplastic characteristics of special polymer sulfur composites, with disoriented ellipsoidal inclusions, are calculated in two stages: First, the properties of materials with oriented inclusions are determined, and then effective constants of a composite with disoriented inclusions are determined on the basis of the Voigt or Rice scheme. A brief summary of new products related to special polymer sulfur composites is given as follows: Impregnation, repair, overlays and precast polymer concrete will be presented. Special polymer sulfur as polymer coating impregnation, which has received little attention in recent years, currently has some very interesting applications.

Visual Hemispheric Specialization: A Computational Theory. Technical Report #7.

ERIC Educational Resources Information Center

Kosslyn, Stephen M.

Visual recognition, navigation, tracking, and imagery are posited to involve some of the same types of representations and processes. The first part of this paper develops a theory of some of the shared types of representations and processing modules. The theory is developed in light of neurophysiological and neuroanatomical data from non-human…

Administration and Research of Competency-/Performance-Based Teacher Education Programs.

ERIC Educational Resources Information Center

Trzasko, Joseph A.

This paper describes the proposed Assessment Center at Mercy College in Dobbs Ferry, New York. The center is intended to provide statistical and technical support for the Mercy College elementary education, special education, and speech and hearing departments in the areas of student assessment, student guidance, and program evaluation. Evaluation…

Network Performance and Coordination in the Health, Education, Telecommunications System. Satellite Technology Demonstration, Technical Report No. 0422.

ERIC Educational Resources Information Center

Braunstein, Jean; Janky, James M.

This paper describes the network coordination for the Health, Education, Telecommunications (HET) system. Specifically, it discusses HET network performance as a function of a specially-developed coordination system which was designed to link terrestrial equipment to satellite operations centers. Because all procedures and equipment developed for…

Reaching the International Student. Tig-Toe: Teaching of Evaluation.

ERIC Educational Resources Information Center

Eastmond, Nick

This brief paper describes a special, informal seminar for international students that used an adjunct instruction model to focus on technical terminology in the field of instructional technology. Foreign students are enrolled concurrently in two linked courses--a language course and a content course with the two courses sharing content base and…

Creating a Canonical Scientific and Technical Information Classification System for NCSTRL+

NASA Technical Reports Server (NTRS)

Tiffany, Melissa E.; Nelson, Michael L.

1998-01-01

The purpose of this paper is to describe the new subject classification system for the NCSTRL+ project. NCSTRL+ is a canonical digital library (DL) based on the Networked Computer Science Technical Report Library (NCSTRL). The current NCSTRL+ classification system uses the NASA Scientific and Technical (STI) subject classifications, which has a bias towards the aerospace, aeronautics, and engineering disciplines. Examination of other scientific and technical information classification systems showed similar discipline-centric weaknesses. Traditional, library-oriented classification systems represented all disciplines, but were too generalized to serve the needs of a scientific and technically oriented digital library. Lack of a suitable existing classification system led to the creation of a lightweight, balanced, general classification system that allows the mapping of more specialized classification schemes into the new framework. We have developed the following classification system to give equal weight to all STI disciplines, while being compact and lightweight.

First International Symposium on Strain Gauge Balances. Pt. 1

NASA Technical Reports Server (NTRS)

Tripp, John S. (Editor); Tcheng, Ping (Editor)

1999-01-01

The first International Symposium on Strain Gauge Balances was sponsored and held at NASA Langley Research Center during October 22-25, 1996. The symposium provided an open international forum for presentation, discussion, and exchange of technical information among wind tunnel test technique specialists and strain gauge balance designers. The Symposium also served to initiate organized professional activities among the participating and relevant international technical communities. Over 130 delegates from 15 countries were in attendance. The program opened with a panel discussion, followed by technical paper sessions, and guided tours of the National Transonic Facility (NTF) wind tunnel, a local commercial balance fabrication facility, and the LaRC balance calibration laboratory. The opening panel discussion addressed "Future Trends in Balance Development and Applications." Forty-six technical papers were presented in 11 technical sessions covering the following areas: calibration, automatic calibration, data reduction, facility reports, design, accuracy and uncertainty analysis, strain gauges, instrumentation, balance design, thermal effects, finite element analysis, applications, and special balances. At the conclusion of the Symposium, a steering committee representing most of the nations and several U.S. organizations attending the Symposium was established to initiate planning for a second international balance symposium, to be held in 1999 in the UK.

First International Symposium on Strain Gauge Balances. Part 2

NASA Technical Reports Server (NTRS)

Tripp, John S (Editor); Tcheng, Ping (Editor)

1999-01-01

The first International Symposium on Strain Gauge Balances was sponsored and held at NASA Langley Research Center during October 22-25, 1996. The symposium provided an open international forum for presentation, discussion, and exchange of technical information among wind tunnel test technique specialists and strain gauge balance designers. The Symposium also served to initiate organized professional activities among the participating and relevant international technical communities. Over 130 delegates from 15 countries were in attendance. The program opened with a panel discussion, followed by technical paper sessions, and guided tours of the National Transonic Facility (NTF) wind tunnel, a local commercial balance fabrication facility, and the LaRC balance calibration laboratory. The opening panel discussion addressed "Future Trends in Balance Development and Applications." Forty-six technical papers were presented in 11 technical sessions covering the following areas: calibration, automatic calibration, data reduction, facility reports, design, accuracy and uncertainty analysis, strain gauges, instrumentation, balance design, thermal effects, finite element analysis, applications, and special balances. At the conclusion of the Symposium, a steering committee representing most of the nations and several U.S. organizations attending the Symposium was established to initiate planning for a second international balance symposium, to be held in 1999 in the UK.

Applying Constructivist Instructional Strategies to E-Learning: A Case Study of a Web Development Course

ERIC Educational Resources Information Center

Wang, Ye Diana

2014-01-01

As the practice of e-learning continues to proliferate, online educators, especially in the computing disciplines, are facing special challenges, due to the lack of relevant literature, the technical nature of the courses, and the perceived need for direct student support mechanisms. This paper presents a constructivist instructional approach to…

TECHNICAL ASSESSMENT OF FUEL CELL OPERATION ON ANAEROBIC DIGESTER GAS AT THE YONKERS, NY, WASTEWATER TREATMENT PLANT

EPA Science Inventory

The paper summarizes the results of a 2-year field test to assess the performance of a specially modified commercial phosphoric acid 200 kW fuel cell power plant to recover energy from anaerobic digester gas (ADG) which has been cleansed of contaminants (sulfur and halide compoun...

Evaluation Approaches to Intelligent Computer-Assisted Instruction. Testing Study Group: The Impact of Advances in Artificial Intelligence on Test Development.

ERIC Educational Resources Information Center

Baker, Eva L.

Some special problems associated with evaluating intelligent computer-assisted instruction (ICAI) programs are addressed. This paper intends to describe alternative approaches to the assessment and improvement of such applications and to provide examples of efforts undertaken and shortfalls. Issues discussed stem chiefly from the technical demands…

Toward the 21st Century: Preparing Proactive Visionary Transformational Leaders for Building Learning Communities. Human Resource Development.

ERIC Educational Resources Information Center

Groff, Warren H.

This package includes a description of Nova University's Human Resource Development (HRD) core seminar and seven doctoral student papers. The description (by Warren Groff) explains how a major curriculum change was made to convert the vocational, technical, and occupational specialization seminar, Personnel-Human Resources Development, to the core…

Some Conceptual and Methodological Issues in Understanding Ability-Performance Relationships. Research Report No. 16.

ERIC Educational Resources Information Center

Schneider, Benjamin, Ed.

This technical report contains the text of papers presented at a conference on personnel selection research. The conference brought together scholars to share their ideas regarding ways in which their own special interests help shed light on ability-performance relationships observed in personnel selection studies. The contributions can be divided…

Water contamination control: Guide for project planning and financing. Technical paper. Control de la contaminacion del agua: Guias para la planificacion y financiamiento de proyectos (in Spanish)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palange, R.C.; Zavala, A.

1989-01-01

This report provides guidelines for administrators, supervisors, and others involved in decision making to satisfy the need for facilities to control water contamination, but who possibly lack specialized training in engineering, economics, financial administration, or other pertinent specialties.

Region VI Inservice Training for Vocational-Technical Personnel (Arlington, Texas, October 7-10, 1975). Conference Report.

ERIC Educational Resources Information Center

EPD Consortium D, Richardson, TX.

This conference report contains a collection of thirteen papers delivered at the Region VI (New Mexico, Texas, Mississippi, Louisiana, and Oklahoma) inservice training conference, which focused on special needs groups (i.e., those with academic, socioeconomic, or physical handicaps that prevent them from succeeding in regular vocational programs).…

Rural Substance Abuse: State of Knowledge and Issues. NIDA Research Monograph 168.

ERIC Educational Resources Information Center

Robertson, Elizabeth B., Ed.; Sloboda, Zili, Ed.; Boyd, Gayle M., Ed.; Beatty, Lula, Ed.; Kozel, Nicholas J., Ed.

This research monograph is based on papers from a technical review meeting of the same name, held April 26-27, 1994. It provides information about the special nature or context of rural communities that might impact patterns of drug and alcohol consumption and delivery of prevention and treatment services; health, social, and economic consequences…

1994 OTC spotlights fall on technology, world operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-05-09

Expanding offshore technical capabilities and growing international cooperation were the key-notes last week at the 26th Offshore Technology Conference (OTC) in Houston. Sponsored by the Society of Petroleum Engineers, sessions heard many of the 244 technical papers presented this year focus on field-ready technology considered crucial to more efficient, safer, environmentally sound offshore oil and gas operations. Economic development of satellite and marginal fields was the topic at special technical sessions on the conference's first two mornings. Three dimensional seismic technology was thoroughly discussed in a day-long series of papers presented during the gathering's third day. OTC 1994 topical luncheonsmore » included descriptions by Shell Offshore Inc. of its record setting auger field development project in the Gulf of Mexico, offshore turnkey drilling by a panel of drilling contractors, and the international exploration and production alliance formed in 1990 by BP Exploration and Den norske stats oljeselskap AS. Highlights of the melting are discussed.« less

Scientific and Technical English.

ERIC Educational Resources Information Center

Vaclavik, Jaroslav

Technical English differs from everyday English because of the specialized contexts in which it is used and because of the specialized interests of scientists and engineers. This text provides exercises in technical and scientific exposition in the following fields: mathematics, physics, temperature effects, mechanics, dynamics, conservation of…

Joint proceedings, Second Genetics Workshop of the Society of American Foresters and Seventh Lake States Forest Tree Improvement Conference, October 21-23, 1965.

Treesearch

NCFES

1966-01-01

Included are (1) 22 technical papers (by researchers from many sections of the United States and Canada) pertaining to selection and progeny testing, radiation genetics, intraspecific variation, natural and artificial hybridization, breeding systems, breeding methodology and specialized tree breeding techniques, and applied breeding and allied fields; (2) concise...

Accreditation of specialized asthma units for adults in Spain: an applicable experience for the management of difficult-to-control asthma

PubMed Central

Cisneros, Carolina; Díaz-Campos, Rocío Magdalena; Marina, Núria; Melero, Carlos; Padilla, Alicia; Pascual, Silvia; Pinedo, Celia; Trisán, Andrea

2017-01-01

This paper, developed by consensus of staff physicians of accredited asthma units for the management of severe asthma, presents information on the process and requirements for already-existing asthma units to achieve official accreditation by the Spanish Society of Pneumology and Thoracic Surgery (SEPAR). Three levels of specialized asthma care have been established based on available resources, which include specialized units for highly complex asthma, specialized asthma units, and basic asthma units. Regardless of the level of accreditation obtained, the distinction of “excellence” could be granted when more requirements in the areas of provision of care, technical and human resources, training in asthma, and teaching and research activities were met at each level. The Spanish experience in the process of accreditation of specialized asthma units, particularly for the care of patients with difficult-to-control asthma, may be applicable to other health care settings. PMID:28533690

Special Education Finance in California. Technical Appendices

ERIC Educational Resources Information Center

Hill, Laura; Warren, Paul; Murphy, Patrick; Ugo, Iwunze; Pathak, Aditi

2016-01-01

This document presents the technical appendices that accompany the full report, "Special Education Finance in California." The appendices include: (1) Problems with AB 602 and Other State Funding Programs for Special Education; (2) Additional Figures for Analysis of Distribution of Students with Disabilities; (3) Using Supplemental and…

Sources, interactions, and ecological impacts of organic contaminants in water, soil, and sediment: an introduction to the special series.

PubMed

Pignatello, Joseph J; Katz, Brian G; Li, Hui

2010-01-01

Agricultural and urban activities result in the release of a large number of organic compounds that are suspected of impacting human health and ecosystems: herbicides, insecticides, human and veterinary pharmaceuticals, natural and synthetic hormones, personal care products, surfactants, plasticizers, fire retardants, and others. Sorbed reservoirs of these compounds in soil represent a potentially chronic source of water contamination. This article is an introduction to a series of technical papers stemming from a symposium at the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America 2008 Annual Meeting, which was held jointly with The Geological Society of America, The Gulf Coast Association of Geological Scientists, and the Houston Geological Society, under one of the Joint Meeting's overarching themes: Emerging Trace Contaminants in Surface and Ground Water Generated from Waste Water and Solid Waste Application. The symposium emphasized the role of soils as sources, sinks, and reaction catalysts for these contaminants and the occurrence and fate of these contaminants in surface and underground water supplies. Topics covered included novel advances in analytical techniques, transport of infectious agents, occurrence and fate of veterinary pharmaceuticals, characterization of sorption mechanism, biotic and abiotic transformation reactions, the role of soil components, occurrence and fate in wastewater treatment systems, transport of engineered nanoparticles, groundwater contamination resulting from urban runoff, and issues in water reuse. Overviews of the reports, trends, gaps in our knowledge, and topics for further research are presented in this special series of papers. The technical papers in this special series reflect current gains in knowledge and simultaneously underscore how poorly we are able to predict the fate and, hence, the associated risk to ecological and human receptors of these contaminants.

Advanced Risk Reduction Tool (ARRT) Special Case Study Report: Science and Engineering Technical Assessments (SETA) Program

NASA Technical Reports Server (NTRS)

Kirsch, Paul J.; Hayes, Jane; Zelinski, Lillian

2000-01-01

This special case study report presents the Science and Engineering Technical Assessments (SETA) team's findings for exploring the correlation between the underlying models of Advanced Risk Reduction Tool (ARRT) relative to how it identifies, estimates, and integrates Independent Verification & Validation (IV&V) activities. The special case study was conducted under the provisions of SETA Contract Task Order (CTO) 15 and the approved technical approach documented in the CTO-15 Modification #1 Task Project Plan.

Principles of Geological Mapping of Marine Sediments (with Special Reference to the African Continental Margin). Unesco Reports in Marine Science No. 37.

ERIC Educational Resources Information Center

Lisitzin, Alexandre P.

Designed to serve as a complement to the Unesco Technical Papers in Marine Science, this report concentrates on theoretical and practical problems of geological mapping of the sea floor. An introduction is given to geological mapping procedures at continental margins as well as some practical recommendations taking as an example the African region…

Human factors in industrial systems: 40 years on.

PubMed

Drury, Colin G

2008-06-01

I evaluate the contribution of a pioneering Human Factors special issue on human factors in industrial systems. Papers on the content of the journal's first 10 years showed that industrial human factors/ergonomics (HF/E) in 1969 was quite a rarity in the journal and the society. The 12 papers in the special issue are reviewed briefly and show a wide range of topics, including traditional industrial engineering, physical HF/E, and more mainstream applications of HF/E in this domain similar to those in military and aerospace domains. The evaluation is through citations, later journal content, society technical group membership, and specific influences of Harris's own paper in the issue. The expected direct citation influence of this special issue was not found: Citation counts were in line with all papers in Human Factors. However, other journals have been founded in North America that serve industrial HF/E and provide an outlet for more papers per year than Human Factors. In addition, the industrial domain is well represented in the Human Factors and Ergonomics Society. Finally, Harris's paper has been influential in the specific area of HF/E in inspection. Industrial HF/E is now more accepted within the HF/E community, although largely in the physical ergonomics subspecialty. There is now evidence of use of HF/E techniques more broadly in industry, including service as well manufacturing enterprises.

An Intensive Onsite Technical Assistance Model to Promote Inclusive Educational Practices for Students with Disabilities in Middle School and High School

ERIC Educational Resources Information Center

Clark, Nitasha M.; Cushing, Lisa S.; Kennedy, Craig H.

2004-01-01

The authors examined the effects of an intensive onsite technical assistance (IOTA) model on the inclusive practices of special educators. Three special educators received technical assistance that included performance assessments, workshops on inclusive practices, and intensive onsite follow-up support. Inclusive practices were measured using…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wassom, J.S.; Lu, P.Y.

Society today is faced with new health risk situations that have been brought about by recent scientific and technical advances. Federal and state governments are required to assess the many potential health risks to exposed populations from the products (chemicals) and by-products (pollutants) of these advances. Because a sound analysis of any potential health risk should be based on the use of relevant information, it behooves those individuals responsible for making the risk assessments to know where to obtain needed information. This paper reviews the origins of toxicology information systems and explores the specialized information center concept that was proposedmore » in 1963 as a means of providing ready access to scientific and technical information. As a means of illustrating this concept, the operation of one specialized information center (the Environmental Mutagen Information Center at Oak Ridge National Laboratory) will be discussed. Insights into how toxicological information resources came into being, their design and makeup, will be of value to those seeking to acquire information for risk assessment purposes. 7 refs., 1 fig., 4 tabs.« less

Integrative laser medicine and high-tech acupuncture at the medical university of graz, austria, europe.

PubMed

Litscher, Gerhard

2012-01-01

At the moment, modernization of acupuncture has a high priority. On the traditional side, acupuncture has only recently been awarded the status of Intangible Cultural Heritage by the UNESCO. On the innovative side, high-tech acupuncture is a registered trademark in Austria. Acupuncture has been used for medical treatment for thousands of years. A large number of empirical data are available but the technical quantification of effects was not possible up to now. Using electroacupuncture, needle, or laser stimulation and modern biomedical techniques, it was possible for the first time to quantify changes in biological activities caused by acupuncture. This paper which serves as introduction for the special issue "High-Tech Acupuncture and Integrative Laser Medicine" of the present journal, focuses on the latest innovative aspects that underline the further enhancement and development of acupuncture. Special emphasis is given to new methodological and technical investigations, for example, results obtained from all kinds of acupuncture innovations (e.g., teleacupuncture) and integrative laser medicine.

Integrative Laser Medicine and High-Tech Acupuncture at the Medical University of Graz, Austria, Europe

PubMed Central

Litscher, Gerhard

2012-01-01

At the moment, modernization of acupuncture has a high priority. On the traditional side, acupuncture has only recently been awarded the status of Intangible Cultural Heritage by the UNESCO. On the innovative side, high-tech acupuncture is a registered trademark in Austria. Acupuncture has been used for medical treatment for thousands of years. A large number of empirical data are available but the technical quantification of effects was not possible up to now. Using electroacupuncture, needle, or laser stimulation and modern biomedical techniques, it was possible for the first time to quantify changes in biological activities caused by acupuncture. This paper which serves as introduction for the special issue “High-Tech Acupuncture and Integrative Laser Medicine” of the present journal, focuses on the latest innovative aspects that underline the further enhancement and development of acupuncture. Special emphasis is given to new methodological and technical investigations, for example, results obtained from all kinds of acupuncture innovations (e.g., teleacupuncture) and integrative laser medicine. PMID:22570669

On modeling human reliability in space flights - Redundancy and recovery operations

NASA Astrophysics Data System (ADS)

Aarset, M.; Wright, J. F.

The reliability of humans is of paramount importance to the safety of space flight systems. This paper describes why 'back-up' operators might not be the best solution, and in some cases, might even degrade system reliability. The problem associated with human redundancy calls for special treatment in reliability analyses. The concept of Standby Redundancy is adopted, and psychological and mathematical models are introduced to improve the way such problems can be estimated and handled. In the past, human reliability has practically been neglected in most reliability analyses, and, when included, the humans have been modeled as a component and treated numerically the way technical components are. This approach is not wrong in itself, but it may lead to systematic errors if too simple analogies from the technical domain are used in the modeling of human behavior. In this paper redundancy in a man-machine system will be addressed. It will be shown how simplification from the technical domain, when applied to human components of a system, may give non-conservative estimates of system reliability.

An application review of dielectric electroactive polymer actuators in acoustics and vibration control

NASA Astrophysics Data System (ADS)

Zhao, Zhenghong; Shuai, Changgeng; Gao, Yan; Rustighi, Emiliano; Xuan, Yuan

2016-09-01

Recent years have seen an increasing interest in the dielectric electroactive polymers (DEAPs) and their potential in actuator applications due to the large strain capabilities. This paper starts with an overview of some configurations of the DEAP actuators and follows with an in-depth literature and technical review of recent advances in the field with special considerations given to aspects pertaining to acoustics and vibration control. Significant research has shown that these smart actuators are promising replacement for many conventional actuators. The paper has been written with reference to a large number of published papers listed in the reference section.

Design, Specification and Construction of Specialized Measurement System in the Experimental Building

NASA Astrophysics Data System (ADS)

Fedorczak-Cisak, Malgorzata; Kwasnowski, Pawel; Furtak, Marcin; Hayduk, Grzegorz

2017-10-01

Experimental buildings for “in situ” research are a very important tool for collecting data on energy efficiency of the energy-saving technologies. One of the most advanced building of this type in Poland is the Maloposkie Laboratory of Energy-saving Buildings at Cracow University of Technology. The building itself is used by scientists as a research object and research tool to test energy-saving technologies. It is equipped with a specialized measuring system consisting of approx. 3 000 different sensors distributed in technical installations and structural elements of the building (walls, ceilings, cornices) and the ground. The authors of the paper will present the innovative design and technology of this specialized instrumentation. They will discuss issues arising during the implementation and use of the building.

Proceedings of the Office of Special Education Programs' Annual Technical Assistance and Dissemination Meeting (6th, Washington, DC, January 16-18, 1996).

ERIC Educational Resources Information Center

Special Education Programs (ED/OSERS), Washington, DC.

This document presents the proceedings for the Office of Special Education Programs' 6th Annual Technical Assistance and Dissemination Meeting held on January 16-18, 1996, in Washington, DC. Conference discussions centered around changing expectations for local and state education agencies and technical assistance and dissemination (TA&D)…

Standards of Practice for West African Libraries; Proceedings of a Seminar Held at the Institute of Librarianship, University of Ibadan, 15-16 April 1967.

ERIC Educational Resources Information Center

Dean, John, Ed.

A seminar on standards for libraries in West Africa was held in April 1967. This proceedings volume presents the papers given by each of the participants. Discussed are the standards for collections, facilities, staff, technical processes and services for public, school, university and special libraries. The purpose was to focus upon the nature,…

EDITORIAL: Measurement techniques for multiphase flows Measurement techniques for multiphase flows

NASA Astrophysics Data System (ADS)

Okamoto, Koji; Murai, Yuichi

2009-11-01

Research on multiphase flows is very important for industrial applications, including power stations, vehicles, engines, food processing and so on. Multiphase flows originally have nonlinear features because of multiphase systems. The interaction between the phases plays a very interesting role in the flows. The nonlinear interaction causes the multiphase flows to be very complicated. Therefore techniques for measuring multiphase flows are very useful in helping to understand the nonlinear phenomena. The state-of-the-art measurement techniques were presented and discussed at the sixth International Symposium on Measurement Techniques for Multiphase Flows (ISMTMF2008) held in Okinawa, Japan, on 15-17 December 2008. This special feature of Measurement Science and Technology includes selected papers from ISMTMF2008. Okinawa has a long history as the Ryukyus Kingdom. China, Japan and many western Pacific countries have had cultural and economic exchanges through Okinawa for over 1000 years. Much technical and scientific information was exchanged at the symposium in Okinawa. The proceedings of ISMTMF2008 apart from these special featured papers were published in Journal of Physics: Conference Series vol. 147 (2009). We would like to express special thanks to all the contributors to the symposium and this special feature. This special feature will be a milestone in measurement techniques for multiphase flows.

A special issue on volcanic centers as targets for mineral exploration

USGS Publications Warehouse

Elston, Wolfgang E.; Plumlee, Geoffrey S.

1994-01-01

NEPTUNE or Pluto? Since the days of Hutton and Werner, every generation of economic geologists has addressed this question in a new light. Most papers in this special issue deal with the thin and leaky roof of Pluto's underworld. It allows hot emanations from Hades to leak out, only to be quenched and diluted by waters percolating down from Neptune's realm. The title of the special issue was taken from a symposium held in Albuquerque, New Mexico, on April 24, 1991, during a joint meeting of the Rocky Mountain and South-Central Sections of the Geological Society of America. More than half of the present authors participated. Although no restrictions were placed on subject matter in the original call for papers, all of the articles in this special issue deal with mineralization related to continental or epicontinental siliceous volcanism. One of us (Elston) summarizes them in his contribution. More than three years have passed since the call for manuscripts was issued. Their preparation, technical editing, reviewing, revision, and copy editing turned out to be a formidable task. Our sincere thanks are due to authors, reviewers, and the staff of Economic Geology for their hard work, dedication, and patience.

Structural Health Monitoring for a Z-Type Special Vehicle

PubMed Central

Yuan, Chaolin; Ren, Liang; Li, Hongnan

2017-01-01

Nowadays there exist various kinds of special vehicles designed for some purposes, which are different from regular vehicles in overall dimension and design. In that case, accidents such as overturning will lead to large economical loss and casualties. There are still no technical specifications to follow to ensure the safe operation and driving of these special vehicles. Owing to the poor efficiency of regular maintenance, it is more feasible and effective to apply real-time monitoring during the operation and driving process. In this paper, the fiber Bragg grating (FBG) sensors are used to monitor the safety of a z-type special vehicle. Based on the structural features and force distribution, a reasonable structural health monitoring (SHM) scheme is presented. Comparing the monitoring results with the finite element simulation results guarantees the accuracy and reliability of the monitoring results. Large amounts of data are collected during the operation and driving progress to evaluate the structural safety condition and provide reference for SHM systems developed for other special vehicles. PMID:28587161

Technical Writing: Past, Present and Future

NASA Technical Reports Server (NTRS)

Mathes, J. C. (Compiler); Pinelli, T. E. (Compiler)

1981-01-01

The training of technical writers and the objectives of such education are discussed. Special emphasis was placed on the communication between technical personnel and non-technical personnel. The liabilities that affect technical writers were also discussed.

Guidelines for producing training films and videos.

PubMed

Harper, P B

1991-01-01

Drawing from experience in producing a film on the surgical procedure of female sterilization, 4 guidelines to technical film production for training purposes are presented and discussed in this paper. In order of presentation in the text, the paper 1st encourages identifying and securing a technical expert, then clearly identifying steps of the technical procedure, involving trainees and trainers in the production process, and working with experienced producers, scriptwriters, and crew members. Returning to the 1st guideline, the technical advisor will have a central presence during all photography and editing, and ideally should not have any personal investment in the procedure being shown. Prior to script finalization and sorting, research is urged to ensure concrete procedural steps. Printed materials, slides, interviews of experienced clinicians, procedure observation, and test videotape shooting may be called upon and employed as parts of the research phase. Trainees should participate during preliminary research, script development, and pretesting of early film versions, their suggestions for change incorporated where appropriate in the final version. On the final point of securing experienced workers, country nationals sensitive to relevant cultural and background dynamics should be included in the team. The special concerns of airport security regulation and customs requirements knowledge are essential, as well as their attention to assuring adequate on-site electricity for camera equipment.

Fuel cells for transport: can the promise be fulfilled? Technical requirements and demands from customers

NASA Astrophysics Data System (ADS)

Klaiber, Thomas

The paper discusses the technical requirements and the customer demands for vehicles that have an on-board methanol reformer and fuel cells. The research concentrates on the technical developmental risks which include minimizing volume, reducing weight and, at the same time, improving efficiency and system dynamics. Fuel cell powered vehicles with methanol reformers are not only suitable for a niche market but also these vehicles will compete with conventional vehicles. The greatest hindrance will be the price of the fuel cell. A possible progressive development of the number of fuel cell powered vehicles in conjunction with a reduction in costs will be discussed in the paper. When fuel cell vehicles come to the market it is necessary that an infrastructure for the fuel methanol or hydrogen is installed. Therefore, it will only be possible to introduce fuel cell vehicles into special markets, e.g. California. Such a process will need to be subsidized by additional incentives like tax concessions. Today there are many technical risks and unsolved problems relating to production technologies, infrastructure, and costs. Nevertheless, among the alternative power units, the fuel cell seems to be the only one that might be competitive to the conventional power unit, especially relating to emissions.

LDEF Materials Workshop 1991, part 2

NASA Technical Reports Server (NTRS)

Stein, Bland A. (Compiler); Young, Philip R. (Compiler)

1992-01-01

The LDEF Materials Workshop 1991 was a follow-on to the Materials Sessions at the First LDEF Post-Retrieval Symposium held in Kissimmee, Florida, June 1991. The workshop comprised a series of technical sessions on materials themes, followed by theme panel meetings. Themes included materials, environmental parameters, and data bases; contamination; thermal control and protective coating and surface treatments; polymers and films; polymer matrix composites; metals, ceramics, and optical materials; lubricants adhesives, seals, fasteners, solar cells, and batteries. This document continues the LDEF Space Environmental Effects on Materials Special Investigation Group (MSIG) pursuit to investigate the effects of LEO exposure on materials which were not originally planned to be test specimens. Papers from the technical sessions are presented.

What Does Competence Entail in Interventional Radiology?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ahmed, Kamran, E-mail: k.ahmed@imperial.ac.u; Keeling, Aoife N.; Khan, Reenam S.

2010-02-15

Interventional radiology is a relatively new speciality and may be referred to as 'image-guided surgery without a scalpel.' Training and accreditation bodies regard interventional radiology training as being 'different' from general radiology because of the additional need for dexterity and clinical acumen. Due to the multidimensional role of an interventional radiologist, a practitioner in this discipline must have a number of the competencies of anesthetists, surgeons, and radiologists. The attributes required of an interventional radiologist are akin to those required of a surgeon. This paper gives an overview of the skills required to be a competent interventional radiologist along withmore » a succinct introduction to methods of assessment of technical and non-technical skills.« less

A Model for S&T Information Provision to Small R&D Systems in Developing Countries with Case Studies in Ethiopia and Tanzania. Stockholm Papers in Library and Information Science.

ERIC Educational Resources Information Center

Winkel, Annette; Schwarz, Stephan

By carefully considering the special characteristics of two small African scientific and technical (S&T) information systems for research and development (R&D), this report defines a simple and straightforward model which can be easily implemented in similar situations with a minimum of external support. The model is designed to build up a…

EDITORIAL: Metrological Aspects of Accelerator Technology and High Energy Physics Experiments

NASA Astrophysics Data System (ADS)

Romaniuk, Ryszard S.; Pozniak, Krzysztof T.

2007-08-01

The subject of this special feature in Measurement Science and Technology concerns measurement methods, devices and subsystems, both hardware and software aspects, applied in large experiments of high energy physics (HEP) and superconducting RF accelerator technology (SRF). These experiments concern mainly the physics of elementary particles or the building of new machines and detectors. The papers present practical examples of applied solutions in large, contemporary, international research projects such as HERA, LHC, FLASH, XFEL, ILC and others. These machines are unique in their global scale and consist of extremely dedicated apparatus. The apparatus is characterized by very large dimensions, a considerable use of resources and a high level of overall technical complexity. They possess a large number of measurement channels (ranging from thousands to over 100 million), are characterized by fast of processing of measured data and high measurement accuracies, and work in quite adverse environments. The measurement channels cooperate with a large number of different sensors of momenta, energies, trajectories of elementary particles, electron, proton and photon beam profiles, accelerating fields in resonant cavities, and many others. The provision of high quality measurement systems requires the designers to use only the most up-to-date technical solutions, measurement technologies, components and devices. Research work in these demanding fields is a natural birthplace of new measurement methods, new data processing and acquisition algorithms, complex, networked measurement system diagnostics and monitoring. These developments are taking place in both hardware and software layers. The chief intention of this special feature is that the papers represent equally some of the most current metrology research problems in HEP and SRF. The accepted papers have been divided into four topical groups: superconducting cavities (4 papers), low level RF systems (8 papers), ionizing radiation (5 papers) and HEP experiments (8 papers). The editors would like to thank cordially all the authors who accepted our invitation to present their very recent results. A number of authors of the papers in this issue are active in the 6th European Framework Research Program CARE—Coordinated Accelerators Research in Europe and ELAN—the European Linear Accelerator Network. Some authors are active in research programs of a global extent such as the LHC, ILC and GDE—the Global Design Effort for the International Linear Collider. We also would like to thank personally, as well as on behalf of all the authors, the Editorial Board of Measurement Science and Technology for accepting this very exciting field of contemporary metrology. This field seems to be really a birthplace of a host of new metrological technologies, where the driving force is the incredibly high technical requirements that must soon be fulfilled if we dream of building new accelerators for elementary particles, new biological materials and medicine alike. Special thanks are due to Professor R S Jachowicz of Warsaw University of Technology for initiating this issue and for continuous support and advice during our work.

Proceedings of the Fourth Microgravity Fluid Physics and Transport Phenomena Conference

NASA Technical Reports Server (NTRS)

1999-01-01

This conference presents information to the scientific community on research results, future directions, and research opportunities in microgravity fluid physics and transport phenomena within NASA's microgravity research program. The conference theme is "The International Space Station." The conference publication consists of the full Proceedings of the 4th Microgravity Fluid Physics and Transport Phenomena Conference on CD-ROM, containing full papers presented at the conference. Ninety papers are presented in 21 technical sessions, and a special exposition session presents 32 posters describing the work of principal investigators new to NASA's program in this discipline. Eighty-eight papers and 25 posters are presented in their entirety on the CD-ROM.

Building an intellectual infrastructure for space commerce

NASA Technical Reports Server (NTRS)

Stone, Barbara A.; Struthers, Jeffrey L.

1992-01-01

Competition in commerce requires an 'intellectual infrastructure', that is, a work force with extensive scientific and technical knowledge and a thorough understanding of the business world. This paper focuses on the development of such intellectual infrastructure for space commerce. Special consideration is given to the contributions to this development by the 17 Centers for the Commercial Development of Space Program conducting commercially oriented research in eight specialized areas: automation and robotics, remote sensing, life sciences, materials processing in space, space power, space propulsion, space structures and materials, and advanced satellite communications. Attention is also given to the Space Business Development Center concept aimed at addressing a variety of barriers common to the development of space commerce.

76 FR 32967 - Proposed Extensions and Waivers: National Early Childhood Technical Assistance Center

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-07

... DEPARTMENT OF EDUCATION [CFDA No. 84.326H] Proposed Extensions and Waivers: National Early Childhood Technical Assistance Center AGENCY: Office of Special Education Programs, Office of Special Education and Rehabilitative Services, Department of Education. ACTION: Notice of proposed extension of...

Do-It-Yourself: A Special Library's Approach to Creating Dynamic Web Pages Using Commercial Off-The-Shelf Applications

NASA Technical Reports Server (NTRS)

Steeman, Gerald; Connell, Christopher

2000-01-01

Many librarians may feel that dynamic Web pages are out of their reach, financially and technically. Yet we are reminded in library and Web design literature that static home pages are a thing of the past. This paper describes how librarians at the Institute for Defense Analyses (IDA) library developed a database-driven, dynamic intranet site using commercial off-the-shelf applications. Administrative issues include surveying a library users group for interest and needs evaluation; outlining metadata elements; and, committing resources from managing time to populate the database and training in Microsoft FrontPage and Web-to-database design. Technical issues covered include Microsoft Access database fundamentals, lessons learned in the Web-to-database process (including setting up Database Source Names (DSNs), redesigning queries to accommodate the Web interface, and understanding Access 97 query language vs. Standard Query Language (SQL)). This paper also offers tips on editing Active Server Pages (ASP) scripting to create desired results. A how-to annotated resource list closes out the paper.

Obtaining Technical Support for Superfund, RCRA and Brownfields Site Issues Fact Sheet

EPA Pesticide Factsheets

EPA’s Technical Support Centers (TSCs) and other technical support services are available to Regional RemedialProject Managers, Corrective Action Staff, and On-Scene Coordinators needing specialized technical expertisefor specific tasks or projects.

LDEF Materials Workshop 1991, part 1

NASA Technical Reports Server (NTRS)

Stein, Bland A. (Compiler); Young, Philip R. (Compiler)

1992-01-01

The workshop comprised a series of technical sessions on materials themes, followed by theme panel meetings. Themes included materials, environmental parameters, and data bases; contamination; thermal control and protective coatings and surface treatments; polymers and films; polymer matrix composites; metals, ceramics, and optical materials; lubricants adhesives, seals, fasteners, solar cells, and batteries. This report contains most of the papers presented at the technical sessions. It also contains theme panel reports and visual aids. This document continues the LDEF Space Environmental Effects on Materials Special Investigation Group (MSIG) pursuit of its charter to investigate the effects of LEO exposure on materials which where not originally planned to be test specimens and to integrate this information with data generated by principal investigators into an LDEF materials data base.

Comments by the Chairman

NASA Astrophysics Data System (ADS)

Fouillat, Pascal

2013-08-01

The European Conference on Radiation and its Effects on Components and Systems (RADECS 2012) was held on September 24-28, 2012, in Biarritz, France. The latest advances in the field of radiation effects on electronic and photonic materials, devices, circuits, sensors, and systems, were presented and discussed. The conference featured a Technical Program, an Industrial Exhibit, and one day meeting on radiation ground effects held on September 24 (RADGROUND). The conference gathered 390 attendees, scientists and engineers from 26 countries, with a high participation of France (101), USA (80), Russia (50), Spain (28), Germany (28), and U.K. (25). Raoul Velazco, from TIMA Labs, was in charge of the Technical Program, assisted by a Technical Program Committee listed below and a pool ofmore than 150 reviewers which contributed maintain the high level of quality reached since many years by the RADECS conferences. The total number of contributions reached 201 and each paper received at least four reviews. There were 145 papers accepted and presented in the Oral Sessions (48), Poster Sessions (69), and Data Workshop (28). The scope of the conference encompassed technological processes and design techniques for producing radiation tolerant systems for space, aeronautical or terrestrial applications, as well as relevant methodologies for their characterization and qualification. The Conference Record, gathering all the papers compliant with IEEE quality standards and editorial rules, is available through the IEEE Xplore Digital Library. The paper candidates and selected for publication in the IEEE TRANSACTIONS ON NUCLEAR SCIENCE will be published in this special issue.

Electronics. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; and overview of the electronics field; an list acknowledging the professionals who helped develop the competency list; and the comprehensive listing of the professional or occupational competencies deemed essential for…

Drafting. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the drafting industry; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for graduates…

Dental Assistant. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the dental assistant occupation; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for…

76 FR 50202 - National Technical Assistance and Dissemination Center for Children Who Are Deaf-Blind; Final...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-12

... DEPARTMENT OF EDUCATION [CFDA No. 84.326T] National Technical Assistance and Dissemination Center for Children Who Are Deaf-Blind; Final Extension of Project Period and Waiver AGENCY: Office of Special Education Programs, Office of Special Education and Rehabilitative Services, Department of...

Carpentry. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). 2001 Revision.

ERIC Educational Resources Information Center

Ohio State Board of Education, Columbus.

This Ohio Integrated Technical and Academic Competency (ITAC) profile provides the professional or occupational competencies deemed essential for a graduate to perform proficiently in carpentry when he or she graduates from the specialization work force development program in industrial and engineering systems. The profile includes competency…

34 CFR 380.6 - What activities may the Secretary fund under technical assistance supported employment projects?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION SPECIAL PROJECTS AND DEMONSTRATIONS FOR PROVIDING SUPPORTED EMPLOYMENT SERVICES TO INDIVIDUALS... 34 Education 2 2010-07-01 2010-07-01 false What activities may the Secretary fund under technical...

Nurse Assistant. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the nurse assistant occupation; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for…

Visual Communications Art. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the visual communications art profession; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed…

Graphic Communications. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the graphic communications field; a list acknowledging professionals who helped develop the competency list; and a comprehensive list of the professional or occupational competencies deemed essential for…

EDITORIAL: Special issue for papers selected from The 8th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2008) Special issue for papers selected from The 8th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2008)

NASA Astrophysics Data System (ADS)

Tanaka, Shuji

2009-09-01

This special issue of the Journal of Micromechanics and Microengineering features papers selected from The 8th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2008) with the 2nd Symposium on Micro Environmental Machine Systems (μMEMS 2008). The workshop was held in Sendai, Japan on 9-12 November 2008 by Tohoku University. This is the second time that the PowerMEMS workshop has been held in Sendai, following the first workshop in 2000. Power MEMS is one of the newest categories of MEMS, which encompasses microdevices and microsystems for power generation, energy conversion and propulsion. The first concept of Power MEMS was born in the late 1990's from a MEMS-based gas turbine project at Massachusetts Institute of Technology. After that, the research and development of Power MEMS have been promoted by the strong need for compact power sources with high energy and/or power density. Since its inception, Power MEMS has expanded to include not only various MEMS-based power generators but also small energy machines and microdevices for macro power generators. Previously, the main topics of the PowerMEMS workshop were miniaturized gas turbines and micro fuel cells, but recently, energy harvesting has been the hottest topic. In 2008, energy harvesting had a 41% share in the 118 accepted regular papers. This special issue includes 19 papers on various topics. Finally, I would like to express my sincere appreciation to the members of the International Steering Committee, the Technical Program Committee, the Local Organizing Committee and financial supporters. This special issue was edited in collaboration with the staff of IOP Publishing.

An Educational Multimedia Presentation on the Introduction to Spacecraft Charging

NASA Technical Reports Server (NTRS)

Lin, E.; dePayrebrune, M.

2004-01-01

Over the last few decades, significant knowledge has been gained in how to protect spacecraft from charging; however, the continuing technical advancement in the design and build of satellites requires on-going effort in the study of spacecraft charging. A situation that we have encountered is that not all satellite designers and builders are familiar with the problem of spacecraft charging. The design of a satellite involves many talented people with diverse backgrounds, ranging from manufacturing and assembly to engineering and program management. The complex design and build of a satellite system requires people with highly specialized skills such that cross-specialization is often not achievable. As a result, designers and builders of satellites are not usually familiar with the problems outside their specialization. This is also true for spacecraft charging. Not everyone is familiar with the definition of spacecraft charging and the damage that spacecraft charging can cause. Understanding the problem is an important first step in getting everyone involved in addressing the appropriate spacecraft charging issues during the satellite design and build phases. To address this important first step, an educational multimedia presentation has been created to inform the general engineering community about the basics of spacecraft charging. The content of this educational presentation is based on relevant published technical papers. The presentation was developed using Macromedia Flash. This software produces a more dynamic learning environment than a typical slide show , resulting in a more effective learning experience. The end result is that the viewer will have learned about the basics of spacecraft charging. This presentation is available to the public through our website, www.dplscience.com, free of charge. Viewers are encouraged to pass this presentation to colleagues within their own work environment. This paper describes the content of the multimedia presentation.

PREFACE: 33rd UIT (Italian Union of Thermo-fluid dynamics) Heat Transfer Conference

NASA Astrophysics Data System (ADS)

Paoletti, Domenica; Ambrosini, Dario; Sfarra, Stefano

2015-11-01

The 33rd UIT (Italian Union of Thermo-Fluid Dynamics) Heat Transfer Conference was organized by the Dept. of Industrial and Information Engineering and Economics, University of L'Aquila (Italy) and was held at the Engineering Campus of Monteluco di Roio, L'Aquila, June 22-24, 2015. The annual UIT conference, which has grown over time, came back to L'Aquila after 21 years. The scope of the conference covers a range of major topics in theoretical, numerical and experimental heat transfer and related areas, ranging from energy efficiency to nuclear plants. This year, there was an emphasis on IR thermography, which is growing in importance both in scientific research and industrial applications. 2015 is also the International Year of Light. The Organizing Committee honored this event by introducing a new section, Technical Seminars, which in this edition was mainly devoted to optical flow visualization (also the subject of three different national workshops organized in L'Aquila by UIT in 2003, 2005 and 2008). The conference was held in the recently repaired Engineering buildings, six years after the 2009 earthquake and 50 years after the beginning of the Engineering courses in L'Aquila. Despite some logistical difficulties, 92 papers were submitted by about 270 authors, on eight different topics: heat transfer and efficiency in energy systems, environmental technologies and buildings (32 papers); micro and nano scale thermo-fluid dynamics (5 papers); multi-phase fluid dynamics, heat transfer and interface phenomena (16 papers); computational fluid dynamics and heat transfer (15 papers); heat transfer in nuclear plants (6 papers); natural, forced and mixed convection (6 papers); IR thermography (4 papers); conduction and radiation (3 papers). The conference program scheduled plenary, oral and poster sessions. The three invited plenary Keynote Lectures were given by Prof. Antonio Barletta (University of Bologna, Italy), Prof. Jean-Christophe Batsale (Arts et Metiers Paris Tech, Talence, France) and Prof. Walter Grassi (University of Pisa, Italy). The two invited Technical Seminars were given by Dr. Maurizio Santini (University of Bergamo, Italy) and Prof. Giovanni Tanda (University of Genova, Italy). There were also 13 oral sessions and three poster sessions. This special issue collects the five papers presented in the plenary sessions (keynote lectures and technical seminars) plus 60 papers selected from those presented and discussed during the congress. The UIT 2015 conference has been a useful occasion to stimulate discussion, further the understanding of heat transfer and related phenomena, present the state-of-the-art of some topics, discuss emerging trends and promote collaborations. We hope this issue will maintain and extend some of these features. A special thank you is due to the Organizing and Scientific Committees, to the sponsors and to all the participants.

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 6 2012-01-01 2012-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 6 2014-01-01 2014-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 6 2011-01-01 2011-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 6 2013-01-01 2013-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

NASA Langley Scientific and Technical Information Output 2000

NASA Technical Reports Server (NTRS)

Machie, Harriet B. (Compiler); Stewart, Susan H. (Compiler)

2001-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 2000. Included are citations for Special Publications, Technical Publications, Conference Publications, Technical Memorandum, Contractor Reports, Journal Articles and Book Publications, Meeting Presentations, Technical Talks, Tech Briefs, and Patents.

NASA Langley Scientific and Technical Information Output?2003

NASA Technical Reports Server (NTRS)

Stewart, Susan H. (Compiler)

2004-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 2003. Included are citations for Special Publications, Technical Publications, Conference Publications, Technical Memorandums, Contractor Reports, Journal Articles and Book Publications, Meeting Presentations, Technical Talks, and Patents.

NASA Langley Scientific and Technical Information Output: 1999

NASA Technical Reports Server (NTRS)

Stewart, Susan H. (Compiler); Machie, Harriet (Compiler)

2000-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1999. Included are citations for Special Publications, Technical Publications, Conference Publications, Technical Memorandums, Contractor Reports, Journal Articles and Book Publications, Meeting Presentations, Technical Talks, Tech Briefs, and Patents.

The Unmanned Mission Avionics Test Heliciopter - a Flexible and Versatile Vtol-Uas Experimental System

NASA Astrophysics Data System (ADS)

Schulz, H.-W., , Dr.

2011-09-01

civil customers. These applications cover a wide spectrum from R&D programs for the military customer to special services for the civil customer. This paper focuses on the technical conversion of a commercially available VTOL-UAS to ESG's Unmanned Mission Avionics Test Helicopter (UMAT), its concept and operational capabilities. At the end of the paper, the current integration of a radar sensor is described as an example of the UMATs flexibility. The radar sensor is developed by the Fraunhofer Institute for High Frequency Physics and Radar Techniques (FHR). It is integrated by ESG together with the industrial partner SWISS UAV.

Technical Subjects. Mathematics. Science. Curriculum RP-27.

ERIC Educational Resources Information Center

Ontario Dept. of Education, Toronto.

GRADES OR AGES: Grades 9-12. SUBJECT MATTER: Technical subjects and special mathematics and science courses for technical students. Technical subjects include air conditioning, auto mechanics, carpentry, drafting, applied electronics, masonry, painting, plumbing, service station operation, welding, and woodworking. ORGANIZATION AND PHYSICAL…

21 CFR 14.80 - Qualifications for members of standing policy and technical advisory committees.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., and experience; specific technical expertise is not a requirement; (2) Are subject to the conflict of...), are subject to the conflict of interest laws and regulations either as special Government employees or... involved is not a requirement; and (ii) May be special Government employees subject to the conflict of...

FRINGE EFFECTS OF VALUE ENGINEERING. A SURVEY PREPARED BY THE TECHNICAL SUBCOMMITTEE, AOA SPECIAL COMMITTEE ON VALUE ENGINEERING FOR THE OFFICE OF THE ASSISTANT SECRETARY OF DEFENSE (INSTALLATIONS AND LOGISTICS).

DTIC Science & Technology

Fringe effects of value engineering. A survey prepared by the technical subcommittee, AOA special committee on value engineering for the office of the assistant secretary of defense (installations and logistics).

Specialized Meaninglessness: A Source of Truth in the Technical Age.

ERIC Educational Resources Information Center

Thompson, Mark E.

This essay discusses how technical processes can deceive us and how college educators and social scientists must be especially sensitive to the dangers of technology when conducting research and proposing applications from research. As technology and bureaucratic controls have grown, so too have the demands for specialized knowledge in many areas.…

Practical Nursing. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document contains an introduction to the Ohio Integrated Technical and Academic Competency (ITAC) and Specialization ITAC; an overview of the field of practical nursing; a list acknowledging professionals who helped develop the competency list; and the comprehensive list of the professional or occupational competencies deemed essential for…

[Traffic accidents: a qualitative approach from Campinas, São Paulo, Brazil].

PubMed

Queiroz, Marcos S; Oliveira, Patrícia C P

2002-01-01

This article takes an interdisciplinary qualitative approach to the problem of traffic accidents in Campinas, São Paulo, Brazil. The authors begin by analyzing the "municipalization" (i.e., decentralization to the municipal level) of transport and traffic management in Campinas based on social representations by members of the local government's technical staff. Data demonstrate a significant drop in traffic accident mortality in Campinas in the last ten years. The findings illustrate how new transport and traffic policies had several positive effects. Special attention is given to the objectives, strategies, and obstacles dealt with by local government in the "municipalization" of traffic. The paper concludes by emphasizing the need for specific public policies to revitalize urban mass transportation, including special traffic safety educational programs.

48 CFR 35.010 - Scientific and technical reports.

Code of Federal Regulations, 2011 CFR

2011-10-01

... SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 35.010 Scientific and technical reports. (a) R&D contracts shall require contractors to furnish scientific and technical reports... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Scientific and technical...

48 CFR 35.010 - Scientific and technical reports.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 35.010 Scientific and technical reports. (a) R&D contracts shall require contractors to furnish scientific and technical reports... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Scientific and technical...

48 CFR 35.010 - Scientific and technical reports.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 1 2012-10-01 2012-10-01 false Scientific and technical... SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 35.010 Scientific and technical reports. (a) R&D contracts shall require contractors to furnish scientific and technical reports...

48 CFR 35.010 - Scientific and technical reports.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 1 2013-10-01 2013-10-01 false Scientific and technical... SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 35.010 Scientific and technical reports. (a) R&D contracts shall require contractors to furnish scientific and technical reports...

48 CFR 35.010 - Scientific and technical reports.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 1 2014-10-01 2014-10-01 false Scientific and technical... SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 35.010 Scientific and technical reports. (a) R&D contracts shall require contractors to furnish scientific and technical reports...

[Experience of the development special medical technical laboratory for studies of effects caused by potent electromagnetic radiation in biologic objects].

PubMed

Gorodetsky, B N; Kalyada, T V; Petrov, S V

2015-01-01

This article covers topics of creating special medical technical laboratory for medial and biologic studies concerning influence of potent high-frequency elecromagnetic radiation on various biologic objects. The authors gave example of such laboratory, described its construction features, purpose and main characteristics of the included devices.

21st Century Educators: Developing and Supporting Great Career and Technical Education Teachers. Special Issues Brief. Revised Edition

ERIC Educational Resources Information Center

Jacques, Catherine; Potemski, Amy

2014-01-01

This Special Issues Brief from the Center on Great Teachers and Leaders (GTL Center) offers insight into three human capital management policies that are critical for career and technical education (CTE) teachers: certification, performance evaluation, and professional development. CTE teachers are uniquely positioned to improve college and career…

Human Choice and CCS Deployment: What have we learned from the social sciences about CCS?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dooley, James J.

2013-08-20

It is my pleasure to present this Virtual Special Issue of key social science papers that have been published in the International Journal of Greenhouse Gas Control (IJGCC). These papers show that the social science research community has significantly advanced the state-of-the-art from vague discussions about the “acceptance of CCS” to a body of deeply insightful and actionable knowledge about how CCS is likely to be framed and how framing will impact the ultimate deployment of CCS as a means of mitigating anthropogenic climate change. The papers assembled here shed light on core issues such as how do humans makemore » decisions about a new technology like CCS that they have no direct personal experience with and what is it is about “new” technologies that we find unsettling. These papers also speak to what are the best, and for that matter the worst, ways of presenting inherently highly technical information to lay audiences, including insights about the substance of the information, the form in which the information is delivered, and who delivers it. An extended editorial about this virtual special issue is freely available on ScienceDirect. I hope you find the papers contained in this Virtual Issue to be as informative and insightful as I do.« less

44 CFR 65.3 - Requirement to submit new technical data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... available, a community shall notify the Administrator of the changes by submitting technical or scientific... IDENTIFICATION AND MAPPING OF SPECIAL HAZARD AREAS § 65.3 Requirement to submit new technical data. A community's...

Identifying and training non-technical skills for teams in acute medicine

PubMed Central

Flin, R; Maran, N

2004-01-01

The aviation domain provides a better analogy for the "temporary" teams that are found in acute medical specialities than industrial or military teamwork research based on established teams. Crew resource management (CRM) training, which emphasises portable skills (for whatever crew a pilot is rostered to on a given flight), has been recognised to have potential application in medicine, especially for teams in the operating theatre, intensive care unit, and emergency room. Drawing on research from aviation psychology that produced the behavioural marker system NOTECHS for rating European pilots' non-technical skills for teamwork on the flightdeck, this paper outlines the Anaesthetists Non-Technical Skills behavioural rating system for anaesthetists working in operating theatre teams. This taxonomy was used as the design basis for a training course, Crisis Avoidance Resource Management for Anaesthetists used to develop these skills, based in an operating theatre simulator. Further developments of this training programme for teams in emergency medicine are outlined. PMID:15465960

Climate Change and Water Infrastructure in Central Asia: adaptation capacities and institutional challenges

NASA Astrophysics Data System (ADS)

Abdullaev, Iskandar; Rakhmatullaev, Shavkat

2014-05-01

The paper discusses vulnerability areas of water sector in arid Central Asia due to climate change projections with particular focus on adaptation to sustainable operation of physical infrastructure capacities (from legal, institutional and technical aspects). Two types of technical installations are the main focus of this paper, i.e., electrical lift irrigation systems and water reservoirs. The first set of electrical lift infrastructure is strategic for delivering water to water users via pumps, diversion structures, vertical drainage facilities and groundwater boreholes; on the other hand, the primarily task of second set of structures is to accumulate the water resources for sectors of economy. In Central Asia, approximately, 20-50% of irrigation water is lifted, yet major of lift structures are in very poor technical conditions coupled with ever increasing of electricity tariffs. Furthermore, useful volumes capacities of water reservoirs are being severely diminished due to bio-physical geomorphologic processes, improper operational regimes and chronic financing for special in-house sedimentation surveys. Most importantly, the key argument is that irrigation sector should internalize its adaptation efforts, i.e., integrate renewable energy technologies, energy audit programs and lastly design comprehensive investment prioritization processes and programs. Otherwise, water sector will be at great risk for continued provision of fundamental services to the public, food security and industry

Research on the EDM Technology for Micro-holes at Complex Spatial Locations

NASA Astrophysics Data System (ADS)

Y Liu, J.; Guo, J. M.; Sun, D. J.; Cai, Y. H.; Ding, L. T.; Jiang, H.

2017-12-01

For the demands on machining micro-holes at complex spatial location, several key technical problems are conquered such as micro-Electron Discharge Machining (micro-EDM) power supply system’s development, the host structure’s design and machining process technical. Through developing low-voltage power supply circuit, high-voltage circuit, micro and precision machining circuit and clearance detection system, the narrow pulse and high frequency six-axis EDM machining power supply system is developed to meet the demands on micro-hole discharging machining. With the method of combining the CAD structure design, CAE simulation analysis, modal test, ODS (Operational Deflection Shapes) test and theoretical analysis, the host construction and key axes of the machine tool are optimized to meet the position demands of the micro-holes. Through developing the special deionized water filtration system to make sure that the machining process is stable enough. To verify the machining equipment and processing technical developed in this paper through developing the micro-hole’s processing flow and test on the real machine tool. As shown in the final test results: the efficient micro-EDM machining pulse power supply system, machine tool host system, deionized filtration system and processing method developed in this paper meet the demands on machining micro-holes at complex spatial locations.

Sport prostheses and prosthetic adaptations for the upper and lower limb amputees: an overview of peer reviewed literature.

PubMed

Bragaru, Mihai; Dekker, Rienk; Geertzen, Jan H B

2012-09-01

Sport prostheses are used by both upper- and lower-limb amputees while participating in sports and other physical activities. Although the number of these devices has increased over the past decade, no overview of the peer reviewed literature describing them has been published previously. Such an overview will allow specialists to choose appropriate prostheses based on available scientific evidence rather than on personal experience or preference. To provide an overview of the sport prostheses as they are described by the papers published in peer reviewed literature. Literature review. Four electronic databases were searched using free text and Medical Subject Headings (MESH) terms. Papers were included if they concerned a prosthesis or a prosthetic adaptation used in sports. Papers were excluded if they did not originate from peer reviewed sources, if they concerned prostheses for body parts other than the upper or lower limbs, if they concerned amputations distal to the wrist or ankle, or if they were written in a language other than English. Twenty-four papers were included in this study. The vast majority contained descriptive data and consisted of expert opinions and technical notes. Data concerning the energy efficiency, technical characteristics and special mechanical properties of prostheses or prosthetic adaptations for sports, other than running, are scarce.

25 CFR 1200.42 - Who can provide technical assistance?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Who can provide technical assistance? 1200.42 Section 1200.42 Indians OFFICE OF THE SPECIAL TRUSTEE FOR AMERICAN INDIANS, DEPARTMENT OF THE INTERIOR AMERICAN INDIAN TRUST FUND MANAGEMENT REFORM ACT Technical Assistance § 1200.42 Who can provide technical...

Agricultural Programs at the Post High School Level; Special Report Prepared for the Pacific Regional Seminar in Agricultural Education (Olympia, May 15-19, 1967).

ERIC Educational Resources Information Center

Hensel, James W.

A general overview of post-high school education in agriculture is presented to show the wide variety of programs and their curricular structure for use by school administrators. Representative agricultural programs in community colleges, junior colleges, vocational and technical schools, area schools, and in specialized technical training…

75 FR 55786 - Office of Special Education Programs, Office of Special Education and Rehabilitative Services...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-14

... DEPARTMENT OF EDUCATION Office of Special Education Programs, Office of Special Education and Rehabilitative Services, Department of Education; Notice of Final Extension of Project Period and Waiver for the... Transition Technical Assistance Center (NSTTAC). Currently, the Office of Special Education Programs (OSEP...

47 CFR 87.151 - Special requirements for differential GPS receivers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Special requirements for differential GPS receivers. 87.151 Section 87.151 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Technical Requirements § 87.151 Special requirements for...

Impulse position control algorithms for nonlinear systems

NASA Astrophysics Data System (ADS)

Sesekin, A. N.; Nepp, A. N.

2015-11-01

The article is devoted to the formalization and description of impulse-sliding regime in nonlinear dynamical systems that arise in the application of impulse position controls of a special kind. The concept of trajectory impulse-sliding regime formalized as some limiting network element Euler polygons generated by a discrete approximation of the impulse position control This paper differs from the previously published papers in that it uses a definition of solutions of systems with impulse controls, it based on the closure of the set of smooth solutions in the space of functions of bounded variation. The need for the study of such regimes is the fact that they often arise when parry disturbances acting on technical or economic control system.

Get away special the low-cost route to orbit

NASA Technical Reports Server (NTRS)

Prouty, C.

1986-01-01

NASA has established the Get Away Special (GAS) program as a means for providing anyone who wishes the opportunity to place a small self-contained experimental payload aboard a Space Shuttle mission for a very low cost. The GAS program is now well established, and has a respectable history with 53 payloads flown to date. The GAS experimenters are a diverse group who have demonstrated that people from all walks of life, and from many nations, are interested in working in space. This paper traces the history of the program from its concept through the development phase to the present time, and takes a brief look at the future. It also addresses the steps involved in making a payload reservation and the programmatic and technical relationships that are established between NASA and GAS customers.

Technical Concept Document. Central Archive for Reusable Defense Software (CARDS)

DTIC Science & Technology

1994-02-28

FeNbry 1994 INFORMAL TECHNICAL REPORT For The SOFTWARE TECHNOLOGY FOR ADAPTABLE, RELIABLE SYSTEMS (STARS) Technical Concept Document Central Archive for...February 1994 INFORMAL TECHNICAL REPORT For The SOFTWARE TECHNOLOGY FOR ADAPTABLE, RELIABLE SYSTEMS (STARS) Technical Concept Document Central Archive...accordance with the DFARS Special Works Clause Developed by: This document, developed under the Software Technology for Adaptable, Reliable Systems

47 CFR 87.149 - Special requirements for automatic link establishment (ALE).

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Special requirements for automatic link establishment (ALE). 87.149 Section 87.149 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Technical Requirements § 87.149 Special requirements...

25 CFR 1200.44 - What action will the Department take on requests for technical assistance?

Code of Federal Regulations, 2010 CFR

2010-04-01

... technical assistance? 1200.44 Section 1200.44 Indians OFFICE OF THE SPECIAL TRUSTEE FOR AMERICAN INDIANS, DEPARTMENT OF THE INTERIOR AMERICAN INDIAN TRUST FUND MANAGEMENT REFORM ACT Technical Assistance § 1200.44 What action will the Department take on requests for technical assistance? We will respond in writing...

EDITORIAL: ECRH physics and technology in ITER

NASA Astrophysics Data System (ADS)

Luce, T. C.

2008-05-01

It is a great pleasure to introduce you to this special issue containing papers from the 4th IAEA Technical Meeting on ECRH Physics and Technology in ITER, which was held 6-8 June 2007 at the IAEA Headquarters in Vienna, Austria. The meeting was attended by more than 40 ECRH experts representing 13 countries and the IAEA. Presentations given at the meeting were placed into five separate categories EC wave physics: current understanding and extrapolation to ITER Application of EC waves to confinement and stability studies, including active control techniques for ITER Transmission systems/launchers: state of the art and ITER relevant techniques Gyrotron development towards ITER needs System integration and optimisation for ITER. It is notable that the participants took seriously the focal point of ITER, rather than simply contributing presentations on general EC physics and technology. The application of EC waves to ITER presents new challenges not faced in the current generation of experiments from both the physics and technology viewpoints. High electron temperatures and the nuclear environment have a significant impact on the application of EC waves. The needs of ITER have also strongly motivated source and launcher development. Finally, the demonstrated ability for precision control of instabilities or non-inductive current drive in addition to bulk heating to fusion burn has secured a key role for EC wave systems in ITER. All of the participants were encouraged to submit their contributions to this special issue, subject to the normal publication and technical merit standards of Nuclear Fusion. Almost half of the participants chose to do so; many of the others had been published in other publications and therefore could not be included in this special issue. The papers included here are a representative sample of the meeting. The International Advisory Committee also asked the three summary speakers from the meeting to supply brief written summaries (O. Sauter: EC wave physics and applications, M. Thumm: Source and transmission line development, and S. Cirant: ITER specific system designs). These summaries are included in this issue to give a more complete view of the technical meeting. Finally, it is appropriate to mention the future of this meeting series. With the ratification of the ITER agreement and the formation of the ITER International Organization, it was recognized that meetings conducted by outside agencies with an exclusive focus on ITER would be somewhat unusual. However, the participants at this meeting felt that the gathering of international experts with diverse specialities within EC wave physics and technology to focus on using EC waves in future fusion devices like ITER was extremely valuable. It was therefore recommended that this series of meetings continue, but with the broader focus on the application of EC waves to steady-state and burning plasma experiments including demonstration power plants. As the papers in this special issue show, the EC community is already taking seriously the challenges of applying EC waves to fusion devices with high neutron fluence and continuous operation at high reliability.

48 CFR 235.010 - Scientific and technical reports.

Code of Federal Regulations, 2014 CFR

2014-10-01

... reports. 235.010 Section 235.010 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 235.010 Scientific and technical reports. (b) For DoD, the Defense Technical Information Center is...

48 CFR 235.010 - Scientific and technical reports.

Code of Federal Regulations, 2010 CFR

2010-10-01

... reports. 235.010 Section 235.010 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 235.010 Scientific and technical reports. (b) For DoD, the Defense Technical Information Center is...

48 CFR 235.010 - Scientific and technical reports.

Code of Federal Regulations, 2012 CFR

2012-10-01

... reports. 235.010 Section 235.010 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 235.010 Scientific and technical reports. (b) For DoD, the Defense Technical Information Center is...

48 CFR 235.010 - Scientific and technical reports.

Code of Federal Regulations, 2013 CFR

2013-10-01

... reports. 235.010 Section 235.010 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 235.010 Scientific and technical reports. (b) For DoD, the Defense Technical Information Center is...

48 CFR 235.010 - Scientific and technical reports.

Code of Federal Regulations, 2011 CFR

2011-10-01

... reports. 235.010 Section 235.010 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 235.010 Scientific and technical reports. (b) For DoD, the Defense Technical Information Center is...

47 CFR 80.659 - Technical requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Technical requirements. 80.659 Section 80.659 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Maritime Support Stations § 80.659 Technical requirements. The authorized frequency...

E-Inclusion in Public Transport: The Role of Self-efficacy

NASA Astrophysics Data System (ADS)

Schreder, Günther; Siebenhandl, Karin; Mayr, Eva

Many subgroups in today's society are not skilled in using novel technologies. Even everyday technologies pose a barrier to technically non-skilled people and - if they fail to use them - exclude them from important parts of daily life. In this paper we discuss the relevance of self-efficacy for the use of one specific kind of everyday technology: the ticket vending machine. Results from observations and interviews within the research project InnoMat are presented to answer the question how self-efficacy influences the ticket buying behavior and show that this motivational factor leads to an active avoidance of ticket machines. Negative experiences seem to be one of the strongest influences, which indicate that the group of technically non-skilled users should be given special attention when developing a new generation of ticket vending machines.

Assessing the effects of underground mining activities on high-voltage overhead power lines

NASA Astrophysics Data System (ADS)

Gusev, Vladimir; Zhuravlyov, Alexei; Maliukhina, Elena

2017-11-01

This paper introduces a technique for predictive assessment of changes in the position of power transmission towers and condition of overhead power lines, located in the zone of influence of displacements and deformations of the Earth's surface caused by mining activities. A special approach for monitoring the technical condition of towers and cables is proposed. It is intended to address the issue of controlling the condition of transmission lines that are under the influence of underground mining activities and to checkmate such impact.

78 FR 40459 - Applications for New Awards; Technical Assistance and Dissemination To Improve Services and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-05

... DEPARTMENT OF EDUCATION Applications for New Awards; Technical Assistance and Dissemination To... AGENCY: Office of Special Education and Rehabilitative Services, Office of Elementary and Secondary Education, Department of Education. ACTION: Notice. Overview Information Technical Assistance and...

EDITORIAL: The Fourth International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2004)

NASA Astrophysics Data System (ADS)

Tanaka, Shuji; Toriyama, Toshiyuki

2005-09-01

This special issue of the Journal of Micromechanics and Microengineering features papers selected from the Fourth International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2004). The workshop was held in Kyoto, Japan, on 28-30 November 2004, by The Ritsumeikan Research Institute of Micro System Technology in cooperation with The Global Emerging Technology Institute, The Institute of Electrical Engineers of Japan, The Sensors and Micromachines Society, The Micromachine Center and The Kyoto Nanotech Cluster. Power MEMS is one of the newest categories of MEMS, which encompasses microdevices and microsystems for power generation, energy conversion and propulsion. The first concept of power MEMS was proposed in the late 1990s by Epstein's group at the Massachusetts Institute of Technology, where they continue to study MEMS-based gas turbine generators. Since then, the research and development of power MEMS have been promoted by the need for compact power sources with high energy and power density. Since its inception, power MEMS has expanded to include not only various MEMS-based power generators but also small energy machines and microdevices for macro power generators. At the last workshop, various devices and systems, such as portable fuel cells and their peripherals, micro and small turbo machinery, energy harvesting microdevices, and microthrusters, were presented. Their power levels vary from ten nanowatts to hundreds of watts, spanning ten orders of magnitude. The first PowerMEMS workshop was held in 2000 in Sendai, Japan, and consisted of only seven invited presentations. The workshop has grown since then, and in 2004 there were 5 invited, 20 oral and 29 poster presentations. From the 54 papers in the proceedings, 12 papers have been selected for this special issue. I would like to express my appreciation to the members of the Organizing Committee and Technical Program Committee. This special issue was edited in collaboration with Professor Toshiyuki Toriyama (Ritsumeikan University), Co-chair of the Technical Program Committee, and the Institute of Physics Publishing staff.

Establishment and development of irradiation technology industry in Shenzhen

NASA Astrophysics Data System (ADS)

Shou-yi, Lu

1993-07-01

This paper discusses the establishment and development of radiation processing—the new technology industry in Shenzhen special economic zone, China, from importing a complete set of irradiation equipment to establishing an industrial system of irradiation commercialization. Through the organization of irradiation production, the safety operation of the equipment, the development of irradiation products, the pioneering of technical markets, the increase of economic benefit and the reveal of social benefit, the irradiation technology industry in Shenzhen has formed a productive capacity of 1 million curies of Cobalt-60 just in a few years. This shows a bright future of the new technical industry. This paper also points out that the radiation sterilization is a ripe and practical technology in the present irradiation technology industry. The academic circles and industrial circles in the world now should closely cooperate to make the superior sterilization technology convinced by the public. The appropriate administrative measures should be taken to make it extended and popularized. This not only increases the level of social medical health, but also urges the irradiation technology to have an outstanding development in commercialization.

FY 1984 scientific and technical reports, articles, papers and presentations

NASA Technical Reports Server (NTRS)

Turner, J. E. (Compiler)

1984-01-01

This bibliography lists formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel. Abstracts are presented for 56 technical memorandum, and 13 technical papers. Six publications, over 260 contractor reports, and more than 300 papers cleared for publication are cited.

California Student Get Away Special Payload GAS-450

NASA Technical Reports Server (NTRS)

Ray, Glen; Burke, Edmund; Waldman, Marty

1993-01-01

The California Student Get Away Special Payload GAS-450, recently went into orbit on the STS-57 Mission, Space Shuttle, Endeavour, 21 June 1993, 6:14 AM and landed on the 29 June 1993 at Kennedy Space Center (KSC). Fifty students from 13 California Central Coast Schools and one in San Francisco designed and built 13 active experiments (6 modules) for this mission. Preliminary analysis of our completely reusable payload bus system indicated that the structure, power system, microprocessor, and sensor systems in each experiment module worked flawlessly. The experiments themselves performed exceptionally well with a 60 percent success ratio. The students are thoroughly documenting their own experiments and results via a standard research paper guideline generated by the GAS-450 technical staff. Lessons learned (program management and technical) are documented at the end of the paper. If any other organization needs payload/experiment development or NASA documentation assistance, then please contact us. We can help make your idea a space tested reality. Three years of intense effort culminated on 3 February 1993, the GSFC field operations team at Kennedy Space Center performed the final pressure decay and electrical tests upon the fully integrated GAS-450 flight canister. Subsequently, the payload was integrated with its parent GAS Bridge Assembly in mid-February and the bridge was transferred to the KSC orbiter team in late February 1993. The STS-57 mission originally scheduled to launch on the 29 April 1993 slipped until 21 June 1993. Our Payload shared the cargo bay with ten other GAS Canisters, the EUREKA experiment, the SHOOT experiment, and the SPACEHAB-1 module. The SIL technical staff retrieved the GAS-450 payload after flight from the NASA Spin Test Facility at KSC and shipped it back to California on the 22 July 1993 for student analysis at Allan Hancock College this summer.

Educational Costs in Technical and Professional Fields of Study. A Report to the Legislature in Response to Assembly Concurrent Resolution 38 (Chapter 50 of the Statutes of 1986). Commission Report 87-21.

ERIC Educational Resources Information Center

California State Postsecondary Education Commission, Sacramento.

Relative costs in specialized occupational fields of study at the California State University and the University of California are evaluated by the California Postsecondary Education Commission. Procedures used by the universities to allocate resources among various technical and specialized fields of study are described. The analysis indicates…

Mainstream Issues of Education and Public Awareness of Space Activities and Sciences among universities and Scientific Institutes.

NASA Astrophysics Data System (ADS)

Singh, Balbir

This paper is an effort to study and analyze several constraints and issues of space technology and education that organizations other than governmental organizations face in awareness program. In recent years, advancements in technologies have made it possible for Volunteer and Technical Communities, non-government organizations, private agencies and academic research institutions to provide increasing support to space education management and emphasis on response efforts. Important cornerstones of this effort and support are the possibility to access and take advantage of satellite imagery as well as the use of other space-based technologies such as telecommunications satellites and global navigation satellite systems included in main curriculum plus the implementation of programs for use of high class sophisticated technologies used by industries to the students and researchers of non-space faring nations. The authors recognize the importance of such new methodologies for education and public Awareness. This paper demonstrates many hurdles universities and scientific institutions face including lack of access in terms of financial and technical resources for better support. A new model for coordinated private sector partnership in response to space sciences and education has been discussed. In depth analysis and techniques need to connect these pioneering communities with the space industry as well as the space governmental agencies, with special emphasis on financial constraints. The paper mandates its role to promote the use of space-based information; its established networks bringing together national institutions responsible for these space based activities, as well as other end users, and space solution experts; and its technical foundation, particularly in the area of information technologies. To help building a tighter cooperation and further understanding among all these communities, paper delivers an intensive report and solutions for future coordination and ease

24 CFR 570.402 - Technical assistance awards.

Code of Federal Regulations, 2014 CFR

2014-04-01

... CFR part 571); and the Special Purpose Grants for Insular Areas, Community Development Work Study and... attended by more than one unit of government. (d) Eligible activities. Activities eligible for technical.... Activities for which costs are ineligible under this section include: (1) In the case of technical assistance...

24 CFR 570.402 - Technical assistance awards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... CFR part 571); and the Special Purpose Grants for Insular Areas, Community Development Work Study and... attended by more than one unit of government. (d) Eligible activities. Activities eligible for technical.... Activities for which costs are ineligible under this section include: (1) In the case of technical assistance...

48 CFR 227.7103-7 - Use and non-disclosure agreement.

Code of Federal Regulations, 2010 CFR

2010-10-01

... release, disclosure, or authorized use of technical data or computer software subject to special license... (b) of this subsection, technical data or computer software delivered to the Government with..., display, or disclose technical data subject to limited rights or computer software subject to restricted...

Soft control of scanning probe microscope with high flexibility.

PubMed

Liu, Zhenghui; Guo, Yuzheng; Zhang, Zhaohui; Zhu, Xing

2007-01-01

Most commercial scanning probe microscopes have multiple embedded digital microprocessors and utilize complex software for system control, which is not easily obtained or modified by researchers wishing to perform novel and special applications. In this paper, we present a simple and flexible control solution that just depends on software running on a single-processor personal computer with real-time Linux operating system to carry out all the control tasks including negative feedback, tip moving, data processing and user interface. In this way, we fully exploit the potential of a personal computer in calculating and programming, enabling us to manipulate the scanning probe as required without any special digital control circuits and related technical know-how. This solution has been successfully applied to a homemade ultrahigh vacuum scanning tunneling microscope and a multiprobe scanning tunneling microscope.

Overview of the 9th International Conference on Hydrodynamics

NASA Astrophysics Data System (ADS)

Lu, Dong-qiang

2010-10-01

The 9th International Conference on Hydrodynamics (ICHD), held in Shanghai, China from 11 to 15 October, 2010, was briefly reviewed. More than 240 delegates from 23 countries and regions attended this Conference, at which three plenary lectures, two keynote lectures and more than 160 papers were delivered. A special symposium on hydrodynamics in honor of Prof. You-sheng He was jointly organized in this ICHD. The printed proceedings, edited by Y. S. Wu, S. Q. Dai, H. Liu et al. and published by China Ocean Press, collect 172 technical papers contributed from 26 countries and regions. The electronic proceedings are distributed by the Elsevier at the ScienceDirect website as "Journal of Hydrodynamics, 2010, Vol. 22, No. 5 (Supplement)".

[A bloody boldness: amputations of the neck of the womb in France at the beginning of the 19th century].

PubMed

Carol, Anne

2008-01-01

During the 1820s and 1830s the number of uterus cervix amputations increases in France, becoming a speciality for some famous surgeons such as Jacques Lisfranc. Since the end of the 1820s, however, the operation is known as useless and dangerous by specialists, and censured in medical papers. Why did Lisfranc carry on operating? This paper tries to clear up the intricate reasons of this success and this passion, by exploring the scientific and technical context, but also the social and professional struggles in the rising art of 19th-century surgery. Thus, it attempts to understand how therapeutic choices or medical practices can be constructed.

Impulse position control algorithms for nonlinear systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sesekin, A. N., E-mail: sesekin@list.ru; Institute of Mathematics and Mechanics, Ural Division of Russian Academy of Sciences, 16 S. Kovalevskaya, Ekaterinburg, 620990; Nepp, A. N., E-mail: anepp@urfu.ru

2015-11-30

The article is devoted to the formalization and description of impulse-sliding regime in nonlinear dynamical systems that arise in the application of impulse position controls of a special kind. The concept of trajectory impulse-sliding regime formalized as some limiting network element Euler polygons generated by a discrete approximation of the impulse position control This paper differs from the previously published papers in that it uses a definition of solutions of systems with impulse controls, it based on the closure of the set of smooth solutions in the space of functions of bounded variation. The need for the study of suchmore » regimes is the fact that they often arise when parry disturbances acting on technical or economic control system.« less

Bibliography--Unclassified Technical Reports, Special Reports, and Technical Notes: FY 1982.

DTIC Science & Technology

1982-11-01

in each category are listed in chronological order under seven areas: manpower management, personnel administration , organization management, education...7633). Technical reports listed that have unlimited distribution can also be obtained from the National Technical Information Service , 5285 Port Royal...simulations of manpower systems. This research exploits the technology of computer-managed large-scale data bases. PERSONNEL ADMINISTRATION The personnel

47 CFR 101.149 - Special requirements for operation in the band 38,600-40,000 MHz

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Special requirements for operation in the band 38,600-40,000 MHz 101.149 Section 101.149 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.149 Special...

47 CFR 101.149 - Special requirements for operation in the band 38,600-40,000 MHz

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Special requirements for operation in the band 38,600-40,000 MHz 101.149 Section 101.149 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.149 Special...

47 CFR 101.149 - Special requirements for operation in the band 38,600-40,000 MHz

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 5 2012-10-01 2012-10-01 false Special requirements for operation in the band 38,600-40,000 MHz 101.149 Section 101.149 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.149 Special...

47 CFR 101.149 - Special requirements for operation in the band 38,600-40,000 MHz

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Special requirements for operation in the band 38,600-40,000 MHz 101.149 Section 101.149 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.149 Special...

47 CFR 101.149 - Special requirements for operation in the band 38,600-40,000 MHz

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Special requirements for operation in the band 38,600-40,000 MHz 101.149 Section 101.149 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.149 Special...

Engineering Technical Support Center (ETSC)

EPA Pesticide Factsheets

ETSC is EPA’s technical support and resource centers responsible for providing specialized scientific and engineering support to decision-makers in the Agency’s ten regional offices, states, communities, and local businesses.

A new principle technic for the transformation from frequency domain to time domain

NASA Astrophysics Data System (ADS)

Gao, Ben-Qing

2017-03-01

A principle technic for the transformation from frequency domain to time domain is presented. Firstly, a special type of frequency domain transcendental equation is obtained for an expected frequency domain parameter which is a rational or irrational fraction expression. Secondly, the inverse Laplace transformation is performed. When the two time-domain factors corresponding to the two frequency domain factors at two sides of frequency domain transcendental equation are known quantities, a time domain transcendental equation is reached. At last, the expected time domain parameter corresponding to the expected frequency domain parameter can be solved by the inverse convolution process. Proceeding from rational or irrational fraction expression, all solving process is provided. In the meantime, the property of time domain sequence is analyzed and the strategy for choosing the parameter values is described. Numerical examples are presented to verify the proposed theory and technic. Except for rational or irrational fraction expressions, examples of complex relative permittivity of water and plasma are used as verification method. The principle method proposed in the paper can easily solve problems which are difficult to be solved by Laplace transformation.

Research and technology, Lewis Research Center

NASA Technical Reports Server (NTRS)

1985-01-01

The NASA Lewis Research Center's research and technology accomplishments for fiscal year 1985 are summarized. The report is organized into five major sections covering aeronautics, aerospace technology, spaceflight systems, space station systems, and computational technology support. This organization of the report roughly parallels the organization of the Center into directorates. Where appropriate, subheadings are used to identify special topics under the major headings. Results of all research and technology work performed during the fiscal year are contained in Lewis-published technical reports and presentations prepared either by Lewis scientists and engineers or by contractor personnel. In addition, significant results are presented by university faculty or graduate students in technical sessions and in journals of the technical societies. For the reader who desires more information about a particular subject, the Lewis contact will provide that information or references. In 1985, five Lewis products were selected by Research and Development Magazine for IR-100 awards. All are described and identified. In addition, the Lewis Distinguished Paper for 1984 to 1985, which was selected by the Chief Scientist and a research advisory board, is included and so identified.

Evaluating Technical Communication Faculty: Some Empirically-Based Criteria and Guidelines. Draft.

ERIC Educational Resources Information Center

Stevenson, Dwight W.

As technical communication is a young academic discipline, evaluating technical communication faculty for promotion, tenure, and merit purposes requires special awareness and care. To determine reasonable expectations of faculty achievement, a study documented the range, types, and frequency of activities of 12 professors and 12 associate…

25 CFR 1200.40 - How will the Department provide technical assistance for tribes?

Code of Federal Regulations, 2013 CFR

2013-04-01

... tribes? 1200.40 Section 1200.40 Indians OFFICE OF THE SPECIAL TRUSTEE FOR AMERICAN INDIANS, DEPARTMENT OF... the Department provide technical assistance for tribes? (a) We will provide direct or contract technical assistance, in accordance with appropriations availability to tribes for developing, implementing...

75 FR 34251 - Office of Special Education and Rehabilitative Services; Overview Information; Centers for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-16

... Information; Centers for Independent Living Program--Training and Technical Assistance; Notice Inviting... Training and Technical Assistance Project. Program Authority: 29 U.S.C. 796f(b); American Recovery and... Independent Living Program--Training and Technical Assistance--CFDA Number 84.400B must be submitted...

75 FR 9193 - Office of Special Education and Rehabilitative Services; Overview Information; Assistive...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-01

... Information; Assistive Technology Act of 1998, as Amended--National Activities--State Training and Technical... requirement to support training and technical assistance to the entities funded under the AT Act to improve... applications that meet this priority. This priority is: State Training and Technical Assistance for Assistive...

44 CFR 65.3 - Requirement to submit new technical data.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technical data. 65.3 Section 65.3 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY... IDENTIFICATION AND MAPPING OF SPECIAL HAZARD AREAS § 65.3 Requirement to submit new technical data. A community's base flood elevations may increase or decrease resulting from physical changes affecting flooding...

48 CFR 435.010 - Scientific and technical reports.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Scientific and technical reports. 435.010 Section 435.010 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 435.010 Scientific and technical reports. Research and development contracts shal...

48 CFR 435.010 - Scientific and technical reports.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 4 2014-10-01 2014-10-01 false Scientific and technical reports. 435.010 Section 435.010 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 435.010 Scientific and technical reports. Research and development contracts shal...

48 CFR 435.010 - Scientific and technical reports.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 4 2013-10-01 2013-10-01 false Scientific and technical reports. 435.010 Section 435.010 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 435.010 Scientific and technical reports. Research and development contracts shal...

48 CFR 435.010 - Scientific and technical reports.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 4 2012-10-01 2012-10-01 false Scientific and technical reports. 435.010 Section 435.010 Federal Acquisition Regulations System DEPARTMENT OF AGRICULTURE SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 435.010 Scientific and technical reports. Research and development contracts shal...

Advances in drainage: Selected works from the Tenth International Drainage Symposium

USGS Publications Warehouse

Strock, Jeffrey S.; Hay, Christopher; Helmers, Matthew; Nelson, Kelly A.; Sands, Gary R.; Skaggs, R. Wayne; Douglas-Mankin, Kyle R.

2018-01-01

This article introduces a special collection of fourteen articles accepted from among the 140 technical presentations, posters, and meeting papers presented at the 10th International ASABE Drainage Symposium. The symposium continued in the tradition of previous symposia that began in 1965 as a forum for presenting and assessing the progress of drainage research and implementation throughout the world. The articles in this collection address a wide range of topics grouped into five broad categories: (1) crop response, (2) design and management, (3) hydrology and scale, (4) modeling, and (5) water quality. The collection provides valuable information for scientists, engineers, planners, and others working on crop production, water quality, and water quantity issues affected by agricultural drainage. The collection also provides perspectives on the challenges of increasing agricultural production in a changing climate, with ever-greater attention to water quality and quantity concerns that will require integrated technical, economic, and social solutions.

Means of storage and automated monitoring of versions of text technical documentation

NASA Astrophysics Data System (ADS)

Leonovets, S. A.; Shukalov, A. V.; Zharinov, I. O.

2018-03-01

The paper presents automation of the process of preparation, storage and monitoring of version control of a text designer, and program documentation by means of the specialized software is considered. Automation of preparation of documentation is based on processing of the engineering data which are contained in the specifications and technical documentation or in the specification. Data handling assumes existence of strictly structured electronic documents prepared in widespread formats according to templates on the basis of industry standards and generation by an automated method of the program or designer text document. Further life cycle of the document and engineering data entering it are controlled. At each stage of life cycle, archive data storage is carried out. Studies of high-speed performance of use of different widespread document formats in case of automated monitoring and storage are given. The new developed software and the work benches available to the developer of the instrumental equipment are described.

Involvement of Individuals in the Development of Technical Solutions and Rules of Management for Building Renovation Projects: A Case Study of Latvia

NASA Astrophysics Data System (ADS)

Pukite, I.; Grekis, A.; Geipele, I.; Zeltins, N.

2017-08-01

In March 2016, the Latvian government approved a new support program for increasing energy efficiency in residential apartment buildings. For the support of renovation of apartment buildings in the period from 2016 to 2023, 166 470 588 EUR will be available. Different persons, such as energy auditors, designers, architects, project managers and builders, will be involved in the process of planning, development and implementation of building renovation. At the development stage of the building renovation project, special attention should be devoted to the first stage - energy audit and technical project development. The problem arises due to the fact that each of these individuals, during the development of technical building documentation, does not work as a completely unified system. The implementation of construction project planning and organisational management system is one of the most important factors to guarantee that the quality of building renovation project is ensured in accordance with the laws and regulatory standards. The paper studies mutual cooperation, professionalism and the role of information feedback of personnel involved in the planning stage of building renovation, which is an essential prerequisite for the renovation process in order to achieve high quality of work and reduce the energy performance indicator. The present research includes the analysis of different technical solutions and their impact on energy efficiency. Mutual harmonisation of technical specifications is also investigated.

Israeli Special Libraries

ERIC Educational Resources Information Center

Foster, Barbara

1974-01-01

Israel is sprinkled with a noteworthy representation of special libraries which run the gamut from modest kibbutz efforts to highly technical scientific and humanities libraries. A few examples are discussed here. (Author/CH)

76 FR 6810 - Announcement of Funding Awards for the Special Needs Assistance Programs-Technical Assistance...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-08

...In accordance with section 102(a)(4)(C) of the Department of Housing and Urban Development Reform Act of 1989, this announcement notifies the public of funding decisions made by the Department in a competition for funding under the Notice of Funding Availability (NOFA) for the Special Needs Assistance Programs Technical Assistance program. This announcement contains the names of the awardees and amounts of the awards made available by HUD.

The National Early Childhood Technical Assistance Center Model for Long-Term Systems Change

ERIC Educational Resources Information Center

Kahn, Lynne; Hurth, Joicey; Kasprzak, Christina M.; Diefendorf, Martha J.; Goode, Susan E.; Ringwalt, Sharon S.

2009-01-01

The National Early Childhood Technical Assistance Center was charged by the U.S. Department of Education's Office of Special Education Programs from October 2001 through September 2006 to develop, implement, and evaluate an approach to technical assistance (TA) that would result in sustainable systems change in state early intervention and…

Scientific and Technical Information in Canada, Part II, Chapter 1: Government Departments and Agencies.

ERIC Educational Resources Information Center

Science Council of Canada, Ottawa (Ontario).

Canada's major scientific and technical information resources are supported largely by the Federal Government. They consist of libraries, data files, specialized information centers, and field services. The Canadian Government has no overall policy concerning the handling of scientific and technical information. The need for a national information…

An Integrated Bibliographic Information System: Concept and Application for Resource Sharing in Special Libraries.

ERIC Educational Resources Information Center

Cotter, Gladys A.; And Others

The Defense Department Scientific and Technical Information (STI) network is composed of over 200 technical libraries and information centers tied together by the Defense Technical Information Center (DTIC), an organization which seeks to improve the flow of information throughout the STI network by promoting shared cataloging and integrated…

The Writer's Mind: Ethics in the Teaching of Technical Writing.

ERIC Educational Resources Information Center

Rubens, Philip M.

As opposed to being a "closed" text (tightly constrained by physical formats, corporate style, and specialized vocabulary), technical writing is actually "open" in the sense that such a text can be interpreted subjectively by an informed audience. Three ethical issues that should be explored in teaching technical writing include personality--the…

Testing Services

NASA Technical Reports Server (NTRS)

1993-01-01

Trace Laboratories is an independent testing laboratory specializing in testing printed circuit boards, automotive products and military hardware. Technical information from NASA Tech Briefs and two subsequent JPL Technical Support packages have assisted Trace in testing surface insulation resistance on printed circuit board materials. Testing time was reduced and customer service was improved because of Jet Propulsion Laboratory technical support packages.

Technical Manual: easyCBM. Technical Report #1408

ERIC Educational Resources Information Center

Anderson, Daniel; Alonzo, Julie; Tindal, Gerald; Farley, Dan; Irvin, P. Shawn; Lai, Cheng-Fei; Saven, Jessica L.; Wray, Kraig A.

2014-01-01

Since the easyCBM© learning system was first published in 2006, over $8 million of federal funding (both from the Office of Special Education Programs and more recently from the Institute of Education Sciences) has been used to develop, study, and refine the assessments available on the system. This Technical Manual summarizes the ongoing research…

Technical requirements of a social networking platform for senior citizens.

PubMed

Demski, Hans; Hildebrand, Claudia; López Bolós, José; Tiedge, Winfried; Wengel, Stefanie; O Broin, Daire; Palmer, Ross

2012-01-01

Feeling an integrative part of a social community adds to the quality of life. Elderly people who find it more difficult to actively join activities are often threatened by isolation. Social networking can enable communication and sharing activities makes it easier to set up and maintain contacts. This paper describes the development of a social networking platform and activities like gaming and exergaming all of which aim to facilitate social interaction. It reports on the particular challenges that need to be addressed when creating a social networking platform specially designed to meet the needs of the elderly.

Efficient Computation Of Behavior Of Aircraft Tires

NASA Technical Reports Server (NTRS)

Tanner, John A.; Noor, Ahmed K.; Andersen, Carl M.

1989-01-01

NASA technical paper discusses challenging application of computational structural mechanics to numerical simulation of responses of aircraft tires during taxing, takeoff, and landing. Presents details of three main elements of computational strategy: use of special three-field, mixed-finite-element models; use of operator splitting; and application of technique reducing substantially number of degrees of freedom. Proposed computational strategy applied to two quasi-symmetric problems: linear analysis of anisotropic tires through use of two-dimensional-shell finite elements and nonlinear analysis of orthotropic tires subjected to unsymmetric loading. Three basic types of symmetry and combinations exhibited by response of tire identified.

Some Aspects of an Air-Core Single-Coil Magnetic Suspension System

NASA Technical Reports Server (NTRS)

Hamlet, Irvin L.; Kilgore, Robert A.

1966-01-01

This paper presents some of the technical aspects in the development at the Langley Research Center of an air-cove, dual-wound, single-coil, magnetic-suspension system with one-dimensional control. Overall electrical system design features and techniques are discussed in addition to the problems of control and stability. Special treatment is given to the operation of a dual-wound, high-current support coil which provides the bias fields and superimposed modulated field. Other designs features include a six-phase, solid-state power stage for modulation of the relatively large magnitude control current, and an associated six-phase trigger circuit.

Application of M-JPEG compression hardware to dynamic stimulus production.

PubMed

Mulligan, J B

1997-01-01

Inexpensive circuit boards have appeared on the market which transform a normal micro-computer's disk drive into a video disk capable of playing extended video sequences in real time. This technology enables the performance of experiments which were previously impossible, or at least prohibitively expensive. The new technology achieves this capability using special-purpose hardware to compress and decompress individual video frames, enabling a video stream to be transferred over relatively low-bandwidth disk interfaces. This paper will describe the use of such devices for visual psychophysics and present the technical issues that must be considered when evaluating individual products.

Teaching General Relativity to the Layperson

NASA Astrophysics Data System (ADS)

Egdall, Mark

2009-11-01

This paper describes a lay course on general relativity (GR) given at the Osher Lifelong Learning Institute at Florida International University. It is presented in six hour-and-a-half weekly sessions. Other courses offered by the author include special relativity (which precedes the course described here), quantum theory, and cosmology. Students are people 50 and older, mostly retired or semi-retired like me. They come from all walks of life, including medical doctors, ballet directors, educators, cruise line executives, and poets. Most are college educated, but with little or no formal physics education. A few have technical backgrounds, e.g., chemistry or physics.

76 FR 26793 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-09

... certain pipeline safety regulations. The request includes a technical analysis provided by the operator... at 202-366-0113, or e-mail at [email protected] . Technical: Steve Nanney by telephone at 713-628...

75 FR 55848 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-14

... safety regulations. Dominion's request includes a technical analysis. This request can be found at http...-0490; or, e-mail at [email protected] . Technical: Joshua Johnson by telephone at 816-329-3825; or...

75 FR 4136 - Pipeline Safety: Requests for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-26

... technical analysis or other supporting documentation provided by the requestor, including a description of...: Kay McIver by telephone at (202) 366-0113; or, e-mail at [email protected] . Technical: Steve Nanney...

Consolidated Bibliography--Unclassified Technical Reports, Special Reports, and Technical Notes: FY 1974 through FY 1981.

DTIC Science & Technology

1982-02-01

methodological and design inadequacies. The purposes of this study were to design and test a methodological model and to provide an objective assessment of ICR...provide an alternative to the purchase of special training equipments. Models of the Learner in Computer-assisted Instruction. TR 76-23. December 1975...3. D. Fletcher. lAD-A020 725) The adaptability of computer-assisted instruction to individuals should be en- hanced by the use of explicit models of

FY 1980 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

White, O. L. (Compiler)

1980-01-01

Abstracts are presented for 60 technical memoranda and 5 technical papers published in technical journals or presented by MSFC personnel in FY 1980. Conference and reference publications are cited along with contractor reports and papers cleared for presentation.

13 CFR 120.333 - Are there any special credit criteria?

Code of Federal Regulations, 2013 CFR

2013-01-01

... LOANS Special Purpose Loans Energy Conservation § 120.333 Are there any special credit criteria? In addition to regular credit evaluation criteria, SBA shall weigh the greater risk associated with energy projects. SBA shall consider such factors as quality of the product or service, technical qualifications of...

13 CFR 120.333 - Are there any special credit criteria?

Code of Federal Regulations, 2012 CFR

2012-01-01

... LOANS Special Purpose Loans Energy Conservation § 120.333 Are there any special credit criteria? In addition to regular credit evaluation criteria, SBA shall weigh the greater risk associated with energy projects. SBA shall consider such factors as quality of the product or service, technical qualifications of...

13 CFR 120.333 - Are there any special credit criteria?

Code of Federal Regulations, 2011 CFR

2011-01-01

... LOANS Special Purpose Loans Energy Conservation § 120.333 Are there any special credit criteria? In addition to regular credit evaluation criteria, SBA shall weigh the greater risk associated with energy projects. SBA shall consider such factors as quality of the product or service, technical qualifications of...

13 CFR 120.333 - Are there any special credit criteria?

Code of Federal Regulations, 2014 CFR

2014-01-01

... LOANS Special Purpose Loans Energy Conservation § 120.333 Are there any special credit criteria? In addition to regular credit evaluation criteria, SBA shall weigh the greater risk associated with energy projects. SBA shall consider such factors as quality of the product or service, technical qualifications of...

The relationship between hospital specialization and hospital efficiency: do different measures of specialization lead to different results?

PubMed

Lindlbauer, Ivonne; Schreyögg, Jonas

2014-12-01

This study investigated the relationship between hospital specialization and technical efficiency using different measures of specialization, including two novel approaches based on patient volumes rather than patient proportions. It was motivated by the observation that most studies to date have quantified hospital specialization using information about hospital patients grouped into different categories based on their diagnosis, and in doing so have used proportions-thus indirectly assuming that these categories are dependent on one other. In order to account for the diversification of organizations and the idea that hospitals can be specialized in terms of professional expertise or technical equipment within a given diagnosis category, we developed our two specialization measures based on patient volume in each category. Using a one-step stochastic frontier approach on randomly selected data from the annual reports of 1,239 acute care German hospitals for the years 2000 through 2010, we estimated the relationship of inefficiency to exogenous variables, such as specialization. The results show that specialization as quantified by our novel measures has effects on efficiency that are the opposite of those obtained using earlier measures of specialization. These results underscore the importance of always providing an exact definition of specialization when studying its effects. Additionally, a Monte Carlo simulation based on three scenarios is provided to facilitate the choice of a specialization measure for further analysis.

Captive breeding of pangolins: current status, problems and future prospects.

PubMed

Hua, Liushuai; Gong, Shiping; Wang, Fumin; Li, Weiye; Ge, Yan; Li, Xiaonan; Hou, Fanghui

2015-01-01

Pangolins are unique placental mammals with eight species existing in the world, which have adapted to a highly specialized diet of ants and termites, and are of significance in the control of forest termite disaster. Besides their ecological value, pangolins are extremely important economic animals with the value as medicine and food. At present, illegal hunting and habitat destruction have drastically decreased the wild population of pangolins, pushing them to the edge of extinction. Captive breeding is an important way to protect these species, but because of pangolin's specialized behaviors and high dependence on natural ecosystem, there still exist many technical barriers to successful captive breeding programs. In this paper, based on the literatures and our practical experience, we reviewed the status and existing problems in captive breeding of pangolins, including four aspects, the naturalistic habitat, dietary husbandry, reproduction and disease control. Some recommendations are presented for effective captive breeding and protection of pangolins.

From university to company: education of optical communications in cooperation with industry at Technical University of Ostrava

NASA Astrophysics Data System (ADS)

Vasinek, Vladimir; Skapa, Jan; Siska, Petr; Hanacek, Frantisek; Latal, Jan; Koudelka, Petr; Petrikova, Iva

2009-06-01

Paper deals with cooperation between companies and university, especially with interactions companies and students, companies and pedagogues. At present it is possible to observe insufficient level of practical skills and knowledge among students and their pedagogues, there is no articulation for companies' demands. We try to solve this situation with the help of pilot compartment. Its main task is to associate university teachers, graduate students and companies` specialists. Within the scope activities of the compartment is to prepare one or two day's long special courses. Their mass point is focused to practical training; prepare conditions for trainee-ships dedicated to teachers and students on one side and special courses for technicians, dealers and companies' management on the other. The main goal of this compartment is an interconnection between university education and requirements out coming from praxis. There are many ways of how to fulfill such cooperation.

Funding Transparency under ESSA. Special Report

ERIC Educational Resources Information Center

Woods, Julie Rowland

2018-01-01

This special report explains the new requirements states have in reporting per-pupil expenditures under the Every Student Succeeds Act. It also provides key considerations for states and information about technical assistance and support.

Laminates

NASA Astrophysics Data System (ADS)

Lepedat, Karin; Wagner, Robert; Lang, Jürgen

The use of phenolic resin for the impregnation of a carrier material such as paper or fabric based on either organic or inorganic fibers was and still is one of the most important application areas for liquid phenolic resins. Substrates like paper, cotton, or glass fabric impregnated with phenolic resins are used as core layers for decorative and technical laminates and for many other different industrial applications. Nowadays, phenolic resins for decorative laminates used for furniture, flooring, or in the construction and transportation industry have gained significant market share. The Laminates chapter mainly describes the manufacture of decorative laminates especially the impregnation and pressing process with special emphasis to new technological developments and recent trends. Moreover, the different types of laminates are introduced, combined with some brief comments as they relate to the market for decorative surfaces.

77 FR 58623 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-21

... regulations. The request includes a technical analysis provided by the operator. The request has been filed at... at 202-366-0113, or email at [email protected] . Technical: Patrick Landon by telephone at 202-366...

76 FR 54532 - Pipeline Safety: Request for Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-01

... of a technical analysis by the operator. The request and supporting documents were filed at http... telephone at 202-366-0113, or e-mail at [email protected] . Technical: Steve Nanney by telephone at 713-628...

44 CFR 65.4 - Right to submit new technical data.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Right to submit new technical... IDENTIFICATION AND MAPPING OF SPECIAL HAZARD AREAS § 65.4 Right to submit new technical data. (a) A community has..., other than those initiatedby FEMA, must be made in writing by the Chief Executive Officer of the...

University-government relationships in the training of technical writers-editors

NASA Technical Reports Server (NTRS)

Stohrer, Freda F.; Pinelli, Thomas E.

1979-01-01

Traditional and nontraditional methods of training technical writers-editors are reviewed. Combining work experience with classroom instruction in the form of cooperative education provides a method of strengthening the Federal career service in professional occupations. The NASA Langley experience that successfully introduced students to the special demands of technical writing and editing is described.

Government Information Quarterly. Volume 7, no. 2: National Aeronautics and Space Administration Scientific and Technical Information Programs. Special issue

NASA Technical Reports Server (NTRS)

Hernon, Peter (Editor); Mcclure, Charles R. (Editor); Pinelli, Thomas E. (Editor)

1990-01-01

NASA scientific and technical information (STI) programs are discussed. Topics include management of information in a research and development agency, the new space and Earth science information systems at NASA's archive, scientific and technical information management, and technology transfer of NASA aerospace technology to other industries.

Toward the 21st Century: Preparing Strategic Thinkers in Vocational, Technical, and Occupational Education for Building Learning Communities.

ERIC Educational Resources Information Center

Groff, Warren H.

The 1992 component of Emergence of Vocational, Technical, and Occupational Education (E-VTO) focused on preparing strategic thinkers in vocational, technical, and occupational education (VTO) for building learning communities. The E-VTO seminar was one of the two seminars that comprised the VTO specialization of Nova University's doctoral program…

Fiscal year 1981 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Thacker, S. S. (Compiler)

1981-01-01

This bibliography lists approximately 503 formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY-1981. It also includes papers of MSFC contractors. Citations announced in the NASA scientific and technical information system are noted.

GKTC ACTIVITIES TO PROVIDE NUCLEAR MATERIAL PHYSICAL PROTECTION, CONTROL AND ACCOUNTING TRAINING FOR 2011-2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romanova, Olena; Gavrilyuk, Victor I.; Kirischuk, Volodymyr

2011-10-01

The GKTC was created at the Kyiv Institute of Nuclear Research as a result of collaborative efforts between the United States and Ukraine. The GKTC has been designated by the Ukrainian Government to provide the MPC&A training and methodological assistance to nuclear facilities and nuclear specialists. In 2010 the GKTC has conducted the planned assessment of training needs of Ukrainian MPC&A specialists. The objective of this work is to acquire the detailed information about the number of MPC&A specialists and guard personnel, who in the coming years should receive the further advanced training. As a result of the performed trainingmore » needs evaluation the GKTC has determined that in the coming years a number of new training courses need to be developed. Some training courses are already in the process of development. Also taking into account the specific of activity on the guarding of nuclear facilities, GKTC has begun to develop the specialized training courses for the guarding unit personnel. The evaluation of needs of training of Ukrainian specialists on the physical protection shows that without the technical base of learning is not possible to satisfy the needs of Ukrainian facilities, in particular, the need for further training of specialists who maintains physical protection technical means, provides vulnerability assessment and testing of technical means. To increase the training effectiveness and create the basis for specialized training courses holding the GKTC is now working on the construction of an Interior (non-classified) Physical Protection Training Site. The objective of this site is to simulate the actual conditions of the nuclear facility PP system including the complex of engineering and technical means that will help the GKTC training course participants to consolidate the knowledge and gain the practical skills in the work with PP system engineering and technical means for more effective performance of their official duties. This paper briefly describes the practical efforts applied to the provision of physical protection specialists advanced training in Ukraine and real results on the way to implement such efforts in 2011-2012.« less

FY 1989 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1989-01-01

A compendium of bibliographic references to papers presented by Marshall Space Flight Center (MSFC) personnel and contractors during FY 1989 is provided. The papers include formal NASA technical reports, memoranda, papers which were published in technical journals, and presentations by MSFC personnel. The formal NASA technical reports and memoranda have abstracts included. Sources for obtaining these documents are also included.

Estimation of light commercial vehicles dynamics by means of HIL-testbench simulation

NASA Astrophysics Data System (ADS)

Groshev, A.; Tumasov, A.; Toropov, E.; Sereda, P.

2018-02-01

The high level of active safety of vehicles is impossible without driver assistance electronic systems. Electronic stability control (ESC) system is one of them. Nowadays such systems are obligatory for installation on vehicles of different categories. The approval of active safety level of vehicles with ESC is possible by means of high speed road tests. The most frequently implemented tests are “fish hook” and “sine with dwell” tests. Such kind of tests provided by The Global technical regulation No. 8 are published by the United Nations Economic Commission for Europe as well as by ECE 13-11. At the same time, not only road tests could be used for estimation of vehicles dynamics. Modern software and hardware technologies allow imitating real tests with acceptable reliability and good convergence between real test data and simulation results. ECE 13-11 Annex 21 - Appendix 1 “Use Of The Dynamic Stability Simulation” regulates demands for special Simulation Test bench that could be used not only for preliminary estimation of vehicles dynamics, but also for official vehicles homologation. This paper describes the approach, proposed by the researchers from Nizhny Novgorod State Technical University n.a. R.E. Alekseev (NNSTU, Russia) with support of engineers of United Engineering Center GAZ Group, as well as specialists of Gorky Automobile Plant. The idea of approach is to use the special HIL (hardware in the loop) -test bench, that consists of Real Time PC with Real Time Software and braking system components including electronic control unit (ECU) of ESC system. The HIL-test bench allows imitating vehicle dynamics in condition of “fish hook” and “sine with dwell” tests. The paper describes the scheme and structure of HIL-test bench and some peculiarities that should be taken into account during HIL-simulation.

47 CFR 90.548 - Interoperability Technical Standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Section 90.548 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Regulations Governing the Licensing and Use of Frequencies in...—Digital Radio Technical Standards, approved April 15, 1998, Telecommunications Industry Association, ANSI...

47 CFR 90.548 - Interoperability Technical Standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Section 90.548 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Regulations Governing the Licensing and Use of Frequencies in...—Digital Radio Technical Standards, approved April 15, 1998, Telecommunications Industry Association, ANSI...

Personnel Development for Staff Delivering Special Population Services, Participant's Workbook. Presenter's Manual.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This workbook is designed for use by community and technical college staff involved in delivering counseling, instructional, and/or employment services to special populations throughout Texas. First, the purpose and administration of the Perkins Act of 1990, access and full participation of special populations in vocational education, and the…

EDITORIAL: Microwave Moisture Measurements

NASA Astrophysics Data System (ADS)

Kaatze, Udo; Kupfer, Klaus; Hübner, Christof

2007-04-01

Microwave moisture measurements refer to a methodology by which the water content of materials is non-invasively determined using electromagnetic fields of radio and microwave frequencies. Being the omnipresent liquid on our planet, water occurs as a component in most materials and often exercises a significant influence on their properties. Precise measurements of the water content are thus extremely useful in pure sciences, particularly in biochemistry and biophysics. They are likewise important in many agricultural, technical and industrial fields. Applications are broad and diverse, and include the quality assessment of foodstuffs, the determination of water content in paper, cardboard and textile production, the monitoring of moisture in sands, gravels, soils and constructions, as well as the measurement of water admixtures to coal and crude oil in reservoirs and in pipelines. Microwave moisture measurements and evaluations require insights in various disciplines, such as materials science, dielectrics, the physical chemistry of water, electrodynamics and microwave techniques. The cooperation of experts from the different fields of science is thus necessary for the efficient development of this complex discipline. In order to advance cooperation the Workshop on Electromagnetic Wave Interaction with Water and Moist Substances was held in 1993 in Atlanta. It initiated a series of international conferences, of which the last one was held in 2005 in Weimar. The meeting brought together 130 scientists and engineers from all over the world. This special issue presents a collection of some selected papers that were given at the event. The papers cover most topics of the conference, featuring dielectric properties of aqueous materials, electromagnetic wave interactions, measurement methods and sensors, and various applications. The special issue is dedicated to Dr Andrzej W Kraszewski, who died in July 2006 after a distinguished career of 48 years in the research of microwave applications. Dr Kraszewski was a pioneer in moisture content sensing and the founder of microwave aquametry. He organized the first conferences on electromagnetic wave interactions with water and moist substances and helped to maintain the progress of microwave aquametry research internationally. Andrzej Kraszewski is missed by the microwave moisture measurement community who appreciated both his unusual technical ability and his pleasant and endearing character. Andrzej W Kraszewski, 1933-2006 We hope you will enjoy reading these papers and will extend your scientific curiosity to this field. Finally, we would like to thank all the authors, referees and the staff of Measurement Science and Technology for their contributions and support which have made the publication of this special issue possible.

Technical Working Group on Career and Technical Education Meeting. Meeting Summary (Washington, DC, September 22, 2017)

ERIC Educational Resources Information Center

Ahn, Judie

2017-01-01

On September 22, 2017, the National Center for Special Education Research (NCSER) and the National Center for Education Research (NCER) at the Institute of Education Sciences (IES) convened a group of experts in policy, practice, and research related to Career and Technical Education (CTE). The goal of the meeting was to seek input from…

In der fachsprachlichen Didaktik ist der "fachneutrale" Vorkurs ein Umweg (In Teaching Technical Language, a "Neutral Area" Course is an Evasion)

ERIC Educational Resources Information Center

Becker, Norbert

1974-01-01

In learning to read technical language, texts in specialized technical fields are preferable to "neutral area" or popular science texts. Assorted textbooks are suggested, along with suitable types of exercises and their use. Model preparatory exercises and model drills are included. (Text is in German.) (IFS/WGA)

Automation of Technical Service Functions in Academic, Public, and Special Libraries in Tennessee: Report of a Survey.

ERIC Educational Resources Information Center

Denton, Ann; Mahood, Ramona M.

Members of the Tennessee Library Association's Technical Services Roundtable examined the extent to which the developing technology of automation is being utilized by the state's libraries. The survey encompassed technical service activities and had a two-fold thrust: to determine how automation is being employed, and to compile an inventory of…

EDITORIAL: Advanced Sensors and Instrumentation Systems for the Food and Beverage Industries

NASA Astrophysics Data System (ADS)

Yan, Yong

2006-02-01

Advanced sensors and instrumentation systems are becoming increasingly important in the classification, characterization, authentication, quality control and safety management of food products and beverages. To bring together industrialists and academic researchers to discuss the latest developments and trends in this particular area, the ISAT (Instrument Science and Technology) Group of the Institute of Physics organized a highly focused one-day technical meeting, which was held at the Rutherford Conference Centre at the Institute of Physics in London on 15 December 2004. The event was co-sponsored by the Measurement, Sensors, Instrumentation and NDT Professional Network of the Institution of Electrical Engineers and the Measurement Science and Technology Panel of the Institute of Measurement and Control. The special feature in this issue (on pages 229 287) brings together a collection of some of the papers that were presented at the event. Also included in the special feature are two relevant papers that were submitted through the usual route. Technical topics covered, though wide ranging as reflected in part by the diversity of the papers, demonstrate recent developments and possible approaches that may offer solutions to a broad range of sensing and measurement problems in the food and beverage industries. The first paper, reported by Sheridan et al, is concerned with the quality monitoring of chicken, sausages and pastry products during their cooking processes using an optical fibre-based sensing system. Carter et al describe how digital imaging and image processing techniques have been applied to achieve the classification and authentication of rice grains. The challenges in the measurement and control of final moisture content in baked food products such as bread and biscuits are addressed and discussed by McFarlane. Juodeikiene et al report their progress in the development of acoustic echolocation-based techniques for the evaluation of porosity and structures of cereal products. Acoustic techniques have also been deployed for the liquid density analysis of sucrose and alcoholic beverages, as explained by Turton et al. Similarly, Cegla et al report on bulk velocity and attenuation measurements in non-Newtonian liquids using a 'dipstick' type acoustic sensor, where glycerol and honey were used as test liquids. The adulteration of dairy products has been a major concern in the food and beverage industries in recent years. The paper by Mabrook et al describes the latest developments in single-frequency electrical conductance measurements for the detection of added water in dairy products such as milk and cream. Last but not least is a paper by Taifi et al on the application of ultrasonic techniques in the continuous monitoring of milk coagulation and syneresis in cheese manufacturing. I hope you enjoy reading the papers and find them both interesting and informative. As guest editor, I would like to offer my sincere thanks and appreciation to all the authors, referees and publishing staff of Measurement Science and Technology for their contributions and support, which made this special feature possible.

Ground Water Technical Support Center (GWTSC) Annual ...

EPA Pesticide Factsheets

The Ground Water Technical Support Center (GWTSC) is part of the Ground Water and Ecosystems Restoration Division (GWERD), which is based in the Robert S. Kerr Environmental Research Center in Ada, Oklahoma. The GWERD is a research division of U.S. EPA’s National Risk Management Research Laboratory (NRMRL). The GWTSC is one of an interlinked group of specialized Technical Support Centersthat were established under the Technical Support Project (TSP). The GWTSC provides technical support on issues related to groundwater. Specifically, the GWTSC provides technical support to U.S. EPA and State regulators for issues and problems related to:1. subsurface contamination (contaminants in ground water, soils and sediments),2. cross-media transfer (movement of contaminants from the subsurface to other media such as surface water or air), and3. restoration of impacted ecosystems.The GWTSC works with Remedial Project Managers (RPMs) and other decision makers to solve specific problems at Superfund, RCRA (Resource Conservation and Recovery Act), Brownfields sites, and ecosystem restoration sites. The Ground Water Technical Support Center (GWTSC) is part of the Ground Water and Ecosystems Restoration Division (GWERD), which is based in the Robert S. Kerr Environmental Research Center in Ada, Oklahoma. The GWERD is a research division of U.S. EPA’s National Risk Management Research Laboratory (NRMRL). The GWTSC is one of an interlinked group of specialized Technical Suppo

Energy: A special bibliography with indexes, April 1974

NASA Technical Reports Server (NTRS)

1974-01-01

This literature survey of special energy and energy related documents lists 1708 reports, articles, and other documents introduced into the NASA scientific and technical information system between January 1, 1968, and December 31, 1973. Citations from International Aerospace Abstracts (IAA) and Scientific and Technical Aerospace Reports (STAR) are grouped according to the following subject categories: energy systems; solar energy; primary energy sources; secondary energy sources; energy conversion; energy transport, transmission, and distribution; and energy storage. The index section includes the subject, personal author, corporate source, contract, report, and accession indexes.

"Technical note. Harmonization of the multi-scale multi-model activities HTAP, AQMEII and MICS-Asia: simulations, emission inventories, boundary conditions and output formats." For submission to ACP Special Issue on "Global and regional assessment of intercontinental transport of air pollution: results from HTAP, AQMEII and MICS"

EPA Science Inventory

The ACP Special Issue is being organized to draw together analysis of a set of cooperative modeling experiments (referred to as HTAP2). The purpose of this technical note is to provide a common description of the experimental design and set up for HTAP2 that can be referred to b...

FY 1986 scientific and technical reports, articles, papers and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1986-01-01

Formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center (MSFC) personnel in FY-86 are presented. Also included are papers of MSFC contractors.

75 FR 14482 - Fifty-First Meeting: RTCA Special Committee 186: Automatic Dependent Surveillance-Broadcast (ADS-B)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-25

..., WG-1, Wake Vortex, ARINC Room. RTCA--All Day, WG-4, Application Technical Requirements, Colson Board... Vortex, MacIntosh-NBAA Room & Hilton-ATA Room. RTCA--All Day, WG-4, Application Technical Requirements...

Introduction

NASA Astrophysics Data System (ADS)

2014-12-01

This special issue of Applied Surface Science is a compilation of papers inspired by the symposium on "Surface/Interfaces Characterization and Renewable Energy" held at the 2013 MRS Fall Meeting. Practical uses of renewable energy are one of the greatest technical challenges today. The symposium explored a number of surface and interface-related questions relevant to this overarching theme. Topics from fuel cells to photovoltaics, from water splitting to fundamental and practical issues in charge generation and storage were discussed. The work presented included the use of novel experimental spectroscopic and microscopic analytical techniques, theoretical and computational understanding of interfacial phenomena, characterization of intricate behavior of charged species, as well as molecules and molecular fragments at surfaces and interfaces. It emphasized fundamental understanding of underlying processes, as well as practical devices design and applications of surface and interfacial phenomena related to renewable energy. These subjects are complicated by the transport of photons, electrons, ions, heat, and almost any other form of energy. Given the current concerns of climate change, energy independence and national security, this work is important and of interest to the field of Applied Surface Science. The sixteen papers published in this special issue have all been refereed.

Technical Subjects in Secondary Schools

ERIC Educational Resources Information Center

Howard, A. E.

2008-01-01

Purpose: This paper aims to examine technical education in various types of secondary schools, and suggests three levels of technical courses to be taught in secondary schools. Design/methodology/approach: The paper discusses the differences between technical schools and colleges, and vocational technical courses taught in "academic"…

Standardization of quantum technologies and QKD activities within ETSI (Conference Presentation)

NASA Astrophysics Data System (ADS)

Lenhart, Gaby

2016-04-01

In order to establish new ICT technologies successfully on the market it is essential to build trust within any potential users. This is especially true for technologies which are based upon paradigms that are not yet familiar to these users, such as quantum technologies. Technical standards are an excellent means to offer a certain degree of legal reliability and technical interoperability that is required by industry for commercial take up. While such standards on the one hand must be clear enough to provide strict rules for implementers, on the other hand they also must remain flexible enough to not restrict progress in further research and development on the standardized technology. Hence such standards have to be produced by a wide variety of stakeholders taking into account all their different needs. The paper will provide some insight into the general mechanisms of standardization and their relation to quantum technologies. Alongside with the relevance of standardization as an enabler for certification of quantum based technologies it will explain its potential for securing intellectual property. In its first part paper will concentrate on the advantages of standardization and discuss fears some of the stakeholders share, in detail. The second part will focus on the technical work going on in ETSI in relation to quantum technologies. In 2008 ETSI created a standards work group on Quantum Key Distribution, the ETSI ISG QKD and more recently a group on Quantum-Safe Cryptography, the ETSI ISG QSC. A significant part of the technical work of these groups has already been published and will be introduced in the following. However a big share of work is still ongoing and lot more is planned for the future, as are continuous revisions and updates of the published specifications. This standardization work covers several levels: It starts of by problem statements in the form of use cases, from which technical requirements can be derived. These requirements then form the base upon which a reference architecture is created. Various different specifications describe in detail components, protocols and interfaces. An ontology is developed in order to guarantee common understanding of the technical terms used in standardization for quantum technologies. Special emphasis is provided to security proofs.

Free Appropriate Public Education (FAPE): Special Education and Related Services. Issues in Education. Technical Assistance Bulletin.

ERIC Educational Resources Information Center

Missouri State Dept. of Elementary and Secondary Education, Jefferson City. Div. of Special Education.

This bulletin provides guidance and direction to Missouri local education agencies (LEAs) and Individualized Education Program (IEP) teams regarding the U.S. Office of Special Education Program's findings that indicated Missouri students with disabilities were not always receiving all of the special education and related services that were…

34 CFR 380.1 - What is the program of special projects and demonstrations for providing supported employment...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What is the program of special projects and... technical assistance projects? 380.1 Section 380.1 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION...

47 CFR 25.256 - Special Requirements for operations in the 3.65-3.7 GHz band.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS Technical Standards § 25.256 Special Requirements for....65-3.7 GHz band must negotiate in good faith with that terrestrial licensee to arrive at mutually...

47 CFR 25.256 - Special Requirements for operations in the 3.65-3.7 GHz band.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS Technical Standards § 25.256 Special Requirements for....65-3.7 GHz band must negotiate in good faith with that terrestrial licensee to arrive at mutually...

Hydrogen Fuel Cell on a Helicopter: A System Engineering Approach

NASA Astrophysics Data System (ADS)

Nesheiwat, Rod

Hydrogen fuel cells have been previously investigated as a viable replacement to traditional gas turbine auxiliary power unit onboard fixed wing commercial jets. However, so far no study has attempted to extend their applicability to rotary wing aircrafts. To aid in the advancement of such innovative technologies, a holistic technical approach is required to ensure risk reduction and cost effectiveness throughout the product lifecycle. This paper will evaluate the feasibility of replacing a gas turbine auxiliary power unit on a helicopter with a direct hydrogen, air breathing, proton exchange membrane fuel cell, all while emphasizing a system engineering approach that utilize a specialized set of tools and artifacts.

Decision support system for emergency management of oil spill accidents in the Mediterranean Sea

NASA Astrophysics Data System (ADS)

Liubartseva, Svitlana; Coppini, Giovanni; Pinardi, Nadia; De Dominicis, Michela; Lecci, Rita; Turrisi, Giuseppe; Cretì, Sergio; Martinelli, Sara; Agostini, Paola; Marra, Palmalisa; Palermo, Francesco

2016-08-01

This paper presents an innovative web-based decision support system to facilitate emergency management in the case of oil spill accidents, called WITOIL (Where Is The Oil). The system can be applied to create a forecast of oil spill events, evaluate uncertainty of the predictions, and calculate hazards based on historical meteo-oceanographic datasets. To compute the oil transport and transformation, WITOIL uses the MEDSLIK-II oil spill model forced by operational meteo-oceanographic services. Results of the modeling are visualized through Google Maps. A special application for Android is designed to provide mobile access for competent authorities, technical and scientific institutions, and citizens.

[Problems of X-ray mammology manpower training and management].

PubMed

Rozhkova, N I

2014-01-01

The paper considers the issues of manpower training in X-ray mammology. It mentions staff shortage and no special training, which reduces the efficient activities of X-ray mammographic rooms, as well as shortage of training facilities and no unified educational programs within interdisciplinary integration, inadequate technical equipment in the training facilities, the lack of an accounting system for training higher- and mid-level health workers, as well as engineers. Emphasis is placed on that the educational programs must comply with the organizational forms of testing the specialists to be employed. The introduction of a continuous education system should be accelerated to rule out the decay period of specialists' competence.

Pluripotential theory on quaternionic manifolds

NASA Astrophysics Data System (ADS)

Alesker, Semyon

2012-05-01

On any quaternionic manifold of dimension greater than 4 a class of plurisubharmonic functions (or, rather, sections of an appropriate line bundle) is introduced. Then a Monge-Ampère operator is defined. It is shown that it satisfies a version of the theorems of A. D. Alexandrov and Chern-Levine-Nirenberg. For more special classes of manifolds analogous results were previously obtained in Alesker (2003) [1] for the flat quaternionic space Hn and in Alesker and Verbitsky (2006) [5] for hypercomplex manifolds. One of the new technical aspects of the present paper is the systematic use of the Baston differential operators, for which we also prove a new multiplicativity property.

Backup Mechanical Brake System of the Wind Turbine

NASA Astrophysics Data System (ADS)

Sirotkin, E. A.; Solomin, E. V.; Gandzha, S. A.; Kirpichnikova, I. M.

2018-01-01

Paper clarifies the necessity of the emergency mechanical brake systems usage for wind turbines. We made a deep analysis of the wind turbine braking methods available on the market, identifying their strengths and weaknesses. The electromechanical braking appeared the most technically reasonable and economically attractive. We described the developed combined electromechanical brake system for vertical axis wind turbine driven from electric drive with variable torque enough to brake over the turbine even on the storm wind speed up to 45 m/s. The progress was made due to the development of specific kinematic brake system diagram and intelligent control system managed by special operation algorithm.

Diagonalization of the symmetrized discrete i th right shift operator

NASA Astrophysics Data System (ADS)

Fuentes, Marc

2007-01-01

In this paper, we consider the symmetric part of the so-called ith right shift operator. We determine its eigenvalues as also the associated eigenvectors in a complete and closed form. The proposed proof is elementary, using only basical skills such as Trigonometry, Arithmetic and Linear algebra. The first section is devoted to the introduction of the tackled problem. Second and third parts contain almost all the ?technical? stuff of the proofE Afterwards, we continue with the end of the proof, provide a graphical illustration of the results, as well as an application on the polyhedral ?sandwiching? of a special compact of arising in Signal theory.

Environmental toxicology and risk assessment: Standardization of biomarkers for endocrine disruption and environmental assessment: Eighth volume. Special technical publication 1364

DOE Office of Scientific and Technical Information (OSTI.GOV)

Henshel, D.S.; Black, M.C.; Harrass, M.C.

1999-07-01

This conference was held April 20--22, 1998 in Atlanta, Georgia. The purpose of this conference was to provide a multidisciplinary forum for exchange of state-of-the-art information on biological markers in toxicology and risk assessment, including endocrine disrupter screening assays. Attention is focused on the following: aquatic toxicology; behavioral toxicology; biochemical indicators; developmental indicators; endocrine indicators; biodegradation and fate of chemicals; quality assurance and quality control within laboratory and field studies; risk assessment and communication, and harmonization of standards development. Individual papers have been processed separately for inclusion in the appropriate data bases.

47 CFR 95.635 - Unwanted radiation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 5 2013-10-01 2013-10-01 false Unwanted radiation. 95.635 Section 95.635 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO SERVICES Technical Regulations Technical Standards § 95.635 Unwanted radiation. (a) In addition to the...

47 CFR 95.635 - Unwanted radiation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 5 2014-10-01 2014-10-01 false Unwanted radiation. 95.635 Section 95.635 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO SERVICES Technical Regulations Technical Standards § 95.635 Unwanted radiation. (a) In addition to the...

47 CFR 95.635 - Unwanted radiation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 5 2011-10-01 2011-10-01 false Unwanted radiation. 95.635 Section 95.635 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO SERVICES Technical Regulations Technical Standards § 95.635 Unwanted radiation. (a) In addition to the...

47 CFR 95.635 - Unwanted radiation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Unwanted radiation. 95.635 Section 95.635 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO SERVICES Technical Regulations Technical Standards § 95.635 Unwanted radiation. (a) In addition to the...

FY 2002 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Fowler, B. A. (Compiler)

2003-01-01

This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 2002. It also includes papers of MSFC contractors. The information in this TM may be of value to the scientific and engineering community in determining what information has been published and what is available.

Report of the United Nations Interregional Seminar on the Employment, Development and Role of Scientists and Technical Personnel in the Public Service of Developing Countries, Volume III: Technical Papers.

ERIC Educational Resources Information Center

United Nations, New York, NY. Dept. of Economic and Social Affairs.

This collection of papers is the third of three volumes presenting the proceedings of the United Nations Interregional Seminar on the Employment, Development and Role of Scientists and Technical Personnel in the Public Service of Developing Countries (Volume I, Report of the Seminar; Volume II, Country Papers; and Volume III, Technical Papers).…

Towards Accelerated Aging Methodologies and Health Management of Power MOSFETs (Technical Brief)

NASA Technical Reports Server (NTRS)

Celaya, Jose R.; Patil, Nishad; Saha, Sankalita; Wysocki, Phil; Goebel, Kai

2009-01-01

Understanding aging mechanisms of electronic components is of extreme importance in the aerospace domain where they are part of numerous critical subsystems including avionics. In particular, power MOSFETs are of special interest as they are involved in high voltage switching circuits such as drivers for electrical motors. With increased use of electronics in aircraft control, it becomes more important to understand the degradation of these components in aircraft specific environments. In this paper, we present an accelerated aging methodology for power MOSFETs that subject the devices to indirect thermal overstress during high voltage switching. During this accelerated aging process, two major modes of failure were observed - latch-up and die attach degradation. In this paper we present the details of our aging methodology along with details of experiments and analysis of the results.

Resilience and challenges of marine social-ecological systems under complex and interconnected drivers.

PubMed

Villasante, Sebastián; Macho, Gonzalo; Antelo, Manel; Rodríguez-González, David; Kaiser, Michel J

2013-12-01

In this paper, we summarize the contributions made by an interdisciplinary group of researchers from different disciplines (biology, ecology, economics, and law) that deal with key dimensions of marine social-ecological systems. Particularly, the local and global seafood provision; the feasibility and management of marine protected areas; the use of marine ecosystem services; the institutional dimension in European fisheries, and the affordable models for providing scientific advice to small-scale fisheries. This Special Issue presents key findings from selected case studies around the world available to educators, policy makers, and the technical community. Together, these papers show that a range of diverse ecological, economic, social, and institutional components often mutually interact at spatial and temporal scales, which evidence that managing marine social-ecological systems needs a continuous adaptability to navigate into new governance systems.

Masonry: Materials, testing, and applications. ASTM special technical publication 1356

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brisch, J.H.; Nelson, R.L.; Francis, H.L.

Masonry is one of mankind's oldest arts. The construction of shelters, buildings, castles, and fortresses has been the life work of untold numbers of artists, architects, masons, plasterers, and laborers. Today people marvel at the ancient structures still standing after hundreds and thousands of years. Works such as the Great Wall of China, The Roman Coliseum, the cathedrals of Europe, and masonry bridges still in use after hundreds of years of wear and tear, encourage us to better understand the art, the mechanics, and the chemistries involved in building and maintaining these structures. In this seminar, the authors attempt tomore » convey their experiences towards a better understanding of the principles and mechanics involved in designing and building masonry structures. The papers presented do just that. Separate abstracts were prepared for most papers.« less

Fiscal year 1979 scientific and technical reports, articles, papers and presentations

NASA Technical Reports Server (NTRS)

White, O. L. (Compiler)

1979-01-01

This bibliography lists approximately 590 formal NASA technical reports, papers published in technical journals, presentations by MSFC personnel, and reports of MSFC contractors introduced into the NASA scientific and technical information system in 1979.

ALL RUSSIAN INSTITUTE FOR SCIENTIFIC AND TECHNICAL INFORMATION (VINITI) OF THE RUSSIAN ACADEMY OF SCIENCES

PubMed Central

Markusova, Valentina

2012-01-01

The aim of the paper is to overview the leading information processing domain in Russia and Eastern Europe, namely All Russian Institute for Scientific and Technical Information (VINITI ) of the Russian Academy of Sciences. Russian science structure is different from that in the Western Europe and the US. The main aim of VINITI is to collect, process and disseminate scientific information on various fields of science and technology, published in 70 countries in 40 languages, selected from books, journals, conference proceedings, and patents. A special attention is given to the journal selection and depositing manuscripts (a kind of grey literature), an important source for Russian research. VINITI has created the largest database containing about 30 million records dating back to 1980. About 80,000-100,000 new records are added monthly. VINITI publishes the Journal Abstract (JA) on 19 fields of science, including medicine, containing about a million publications annually. Two thirds of these records are foreign and 36.7% – Russian sources. PMID:23322964

All Russian institute for scientific and technical information (viniti) of the Russian academy of sciences.

PubMed

Markusova, Valentina

2012-06-01

The aim of the paper is to overview the leading information processing domain in Russia and Eastern Europe, namely All Russian Institute for Scientific and Technical Information (VINITI ) of the Russian Academy of Sciences. Russian science structure is different from that in the Western Europe and the US. The main aim of VINITI is to collect, process and disseminate scientific information on various fields of science and technology, published in 70 countries in 40 languages, selected from books, journals, conference proceedings, and patents. A special attention is given to the journal selection and depositing manuscripts (a kind of grey literature), an important source for Russian research. VINITI has created the largest database containing about 30 million records dating back to 1980. About 80,000-100,000 new records are added monthly. VINITI publishes the Journal Abstract (JA) on 19 fields of science, including medicine, containing about a million publications annually. Two thirds of these records are foreign and 36.7% - Russian sources.

Two innovative solutions based on fibre concrete blocks designed for building substructure

NASA Astrophysics Data System (ADS)

Pazderka, J.; Hájek, P.

2017-09-01

Using of fibers in a high-strength concrete allows reduction of the dimensions of small precast concrete elements, which opens up new ways of solution for traditional construction details in buildings. The paper presents two innovative technical solutions for building substructure: The special shaped plinth block from fibre concrete and the fibre concrete elements for new technical solution of ventilated floor. The main advantages of plinth block from fibre concrete blocks (compared with standard plinth solutions) is: easier and faster assembly, higher durability and thanks to the air cavity between the vertical part of the block, the building substructure reduced moisture level of structures under the waterproofing layer and a comprehensive solution to the final surface of building plinth as well as the surface of adjacent terrain. The ventilated floor based on fibre concrete precast blocks is an attractive structural alternative for tackling the problem of increased moisture in masonry in older buildings, lacking a functional waterproof layer in the substructure.

Geostationary platform systems concepts definition follow-on study. Volume 2A: Technical Task 2 LSST special emphasis

NASA Technical Reports Server (NTRS)

1980-01-01

The results of the Large Space Systems Technology special emphasis task are presented. The task was an analysis of structural requirements deriving from the initial Phase A Operational Geostationary Platform study.

7 CFR 3415.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... scientific or technical fields to render special expert advice, through written evaluations of grant applications, in accordance with the provisions of this part, on the scientific or technical merit of grant... employee of the Department to whom the authority to issue or modify grant instruments has been delegated...

7 CFR 3415.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... scientific or technical fields to render special expert advice, through written evaluations of grant applications, in accordance with the provisions of this part, on the scientific or technical merit of grant... employee of the Department to whom the authority to issue or modify grant instruments has been delegated...

7 CFR 3415.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... scientific or technical fields to render special expert advice, through written evaluations of grant applications, in accordance with the provisions of this part, on the scientific or technical merit of grant... employee of the Department to whom the authority to issue or modify grant instruments has been delegated...

A Glossary of Research Terms.

ERIC Educational Resources Information Center

Weatherup, Jim, Comp.

This glossary contains brief definitions of more than 550 special or technical terms used in scientific, technical, and social science research. Entries include various kinds of statistical measures, research variables, types of research tests, and research methodologies. Some computer terminology is also included. The glossary includes both…

47 CFR 74.861 - Technical requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., AUXILIARY, SPECIAL BROADCAST AND OTHER PROGRAM DISTRIBUTIONAL SERVICES Low Power Auxiliary Stations § 74.861 Technical requirements. (a) Transmitter power is the power at the transmitter output terminals and delivered... the purpose of this subpart, the transmitter power is the carrier power. (b) Each authorization for a...

48 CFR 1435.010 - Scientific and technical reports.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 1435.010 Scientific and technical reports. If a Research and Development (R&D) contract results involve classified or national security... available. Copies of publications and reports are also required to be sent to the DOI Departmental Library...

48 CFR 1435.010 - Scientific and technical reports.

Code of Federal Regulations, 2013 CFR

2013-10-01

... SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 1435.010 Scientific and technical reports. If a Research and Development (R&D) contract results involve classified or national security... available. Copies of publications and reports are also required to be sent to the DOI Departmental Library...

48 CFR 1435.010 - Scientific and technical reports.

Code of Federal Regulations, 2011 CFR

2011-10-01

... SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 1435.010 Scientific and technical reports. If a Research and Development (R&D) contract results involve classified or national security... available. Copies of publications and reports are also required to be sent to the DOI Departmental Library...

48 CFR 1435.010 - Scientific and technical reports.

Code of Federal Regulations, 2012 CFR

2012-10-01

... SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 1435.010 Scientific and technical reports. If a Research and Development (R&D) contract results involve classified or national security... available. Copies of publications and reports are also required to be sent to the DOI Departmental Library...

48 CFR 1435.010 - Scientific and technical reports.

Code of Federal Regulations, 2014 CFR

2014-10-01

... SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 1435.010 Scientific and technical reports. If a Research and Development (R&D) contract results involve classified or national security... available. Copies of publications and reports are also required to be sent to the DOI Departmental Library...

FY 2005 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Narmore, K. A. (Compiler)

2007-01-01

This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center (MSFC) personnel in FY 2005. It also includes papers of MSFC contractors. The information in this TM may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 1985 scientific and technical reports, articles, papers and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1985-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by Marshal Space Flight Center (MSFC) personnel in FY 85. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Va. 22161.

Access Skills. Vocational Readiness Skills Inventory for Special Needs Students. (Revised Entry Level Skills Inventory.) Missouri LINC.

ERIC Educational Resources Information Center

Cassity, Sandra; Boyer-Stephens, Arden

This manual is intended to assist special educators and vocational educators in determining the vocational readiness skills of special needs students. The information in this Missouri inventory is based on data provided by the Michigan Occupational Data Analysis System (ODAS) as a part of the Vocational-Technical Education Consortium of States…

FY 2001 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Waits, J. E. Turner (Compiler)

2002-01-01

This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 2001. It also includes papers of MSFC contractors. After being announced in STAR, all NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this TM may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 2004 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Fowler, B. A. (Compiler)

2006-01-01

This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center (MSFC) personnel FY 2004. It also includes papers of MSFC contractors. After being announced in STAR, all NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this TM maybe of value to the scientific and engineering community in determining what information has been published and what is available.

FY 2003 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Fowler, B. A. (Compiler)

2004-01-01

This Technical Memorandum (TM) presents formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center (MSFC) personnel in FY 2003. It also includes papers of MSFC contractors. After being announced in STAR, all NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Spring.eld, VA 22161. The information in this TM may be of value to the scientific and engineering community in determining what information has been published and what is available.

Scientific Jargon, Good and Bad

ERIC Educational Resources Information Center

Hirst, Russel

2003-01-01

Scientific and technical jargon--specialized vocabulary, usually Latinate--plays a vital role in scientific and technical communication. But its proper use continues to be a point of discussion because of our concern with audience adaptation, rhetorical exigence, rhetorical purpose, and ethics. We've focused on teaching students--and on convincing…

47 CFR 80.481 - Alternative technical parameters for AMTS transmitters.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Alternative technical parameters for AMTS transmitters. 80.481 Section 80.481 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Public Coast Stations Automated Systems § 80.481...

Iridium: failures & successes

NASA Astrophysics Data System (ADS)

Christensen, CarissaBryce; Beard, Suzette

2001-03-01

This paper will provide an overview of the Iridium business venture in terms of the challenges faced, the successes achieved, and the causes of the ultimate failure of the venture — bankruptcy and system de-orbit. The paper will address technical, business, and policy issues. The intent of the paper is to provide a balanced and accurate overview of the Iridium experience, to aid future decision-making by policy makers, the business community, and technical experts. Key topics will include the history of the program, the objectives and decision-making of Motorola, the market research and analysis conducted, partnering strategies and their impact, consumer equipment availability, and technical issues — target performance, performance achieved, technical accomplishments, and expected and unexpected technical challenges. The paper will use as sources trade media and business articles on the Iridium program, technical papers and conference presentations, Wall Street analyst's reports, and, where possible, interviews with participants and close observers.

Relational Study of Technical Education in Scotland and Nigeria for Sustainable Skill Development

ERIC Educational Resources Information Center

Umunadi, E. Kennedy

2014-01-01

This paper was designed to look at technical education curriculum and mode of implementation in Scotland in order to adopt the advantageous attributes of the Scottish technical education in Nigeria. The paper x-rayed the staff perceptions of technical education and its roles in Scotland; history of technical education before the advent of British…

The Sixth Alumni Conference of the International Space University

NASA Technical Reports Server (NTRS)

Berry, Steve (Editor)

1997-01-01

These proceedings cover the sixth alumni conference of the International Space University, coordinated by the ISU U.S. Alumni Organization, which was held at Rice University in Houston, Texas, on July 11, 1997. The alumni conference gives graduates of the International Space University's interdisciplinary, international, and intercultural program a forum in which they may present and exchange technical ideas, and keep abreast of the wide variety of work in which the ever-growing body of alumni is engaged. The diversity that is characteristic of ISU is reflected in the subject matter of the papers published in this proceedings. This proceedings preserves the order of the alumni presentations given at the 1997 ISU Alumni Conference. As in previous years, a special effort was made to solicit papers with a strong connection to the two ISU 1997 Summer Session Program design projects: (1) Transfer of Technology, Spin-Offs, Spin-Ins; and (2) Strategies for the Exploration of Mars. Papers in the remaining ten sessions cover the departmental areas traditional to the ISU summer session program.

Patient-Specific Geometry Modeling and Mesh Generation for Simulating Obstructive Sleep Apnea Syndrome Cases by Maxillomandibular Advancement

PubMed Central

Ito, Yasushi; Cheng, Gary C.; Shih, Alan M.; Koomullil, Roy P.; Soni, Bharat K.; Sittitavornwong, Somsak; Waite, Peter D.

2011-01-01

The objective of this paper is the reconstruction of upper airway geometric models as hybrid meshes from clinically used Computed Tomography (CT) data sets in order to understand the dynamics and behaviors of the pre- and postoperative upper airway systems of Obstructive Sleep Apnea Syndrome (OSAS) patients by viscous Computational Fluid Dynamics (CFD) simulations. The selection criteria for OSAS cases studied are discussed because two reasonable pre- and postoperative upper airway models for CFD simulations may not be created for every case without a special protocol for CT scanning. The geometry extraction and manipulation methods are presented with technical barriers that must be overcome so that they can be used along with computational simulation software as a daily clinical evaluation tool. Eight cases are presented in this paper, and each case consists of pre- and postoperative configurations. The results of computational simulations of two cases are included in this paper as demonstration. PMID:21625395

EDITORIAL: Selected papers from the 9th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2009) Selected papers from the 9th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2009)

NASA Astrophysics Data System (ADS)

Ghodssi, Reza; Livermore, Carol; Arnold, David

2010-10-01

This special section of the Journal of Micromechanics and Microengineering presents papers selected from the 9th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2009), which was held in Washington DC, USA from 1-4 December 2009. Since it was first held in Sendai, Japan in 2000, the PowerMEMS workshop has focused on small-scale systems that process, convert, or generate macroscopically significant amounts of power, typically with high power density or high energy density. In the workshop's early years, much of the research presented was on small-scale fueled systems, such as micro heat engines and micro fuel cells. The past nine years have seen a dramatic expansion in the range of technologies that are brought to bear on the challenge of high-power, small-scale systems, as well as an increase in the applications for such technologies. At this year's workshop, 158 contributed papers were presented, along with invited and plenary presentations. The papers focused on applications from micro heat engines and fuel cells, to energy harvesting and its enabling electronics, to thermal management and propulsion. Also presented were the technologies that enable these applications, such as the structuring of microscale, nanoscale and biological systems for power applications, as well as combustion and catalysis at small scales. This special section includes a selection of 12 expanded papers representing energy harvesting, chemical and fueled systems, and elastic energy storage at small scales. We would like to express our appreciation to the members of the International Steering Committee, the Technical Program Committee, the Local Organizing Committee, and to the workshop's financial supporters. We are grateful to the referees for their contributions to the review process. Finally, we would like to thank Dr Ian Forbes, the editorial staff of the Journal of Micromechanics and Microengineering, and the staff of IOP Publishing for making this special section possible.

14 CFR 1201.401 - Special document depositories.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 5 2011-01-01 2010-01-01 true Special document depositories. 1201.401 Section 1201.401 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION STATEMENT OF... provides the National Technical Information Service (NTIS), U.S. Department of Commerce, 5285 Port Royal...

14 CFR 1201.401 - Special document depositories.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Special document depositories. 1201.401 Section 1201.401 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION STATEMENT OF... provides the National Technical Information Service (NTIS), U.S. Department of Commerce, 5285 Port Royal...

14 CFR 1201.401 - Special document depositories.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Special document depositories. 1201.401 Section 1201.401 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION STATEMENT OF... provides the National Technical Information Service (NTIS), U.S. Department of Commerce, 5285 Port Royal...

Special Vocational Program for Handicapped Youth and Adults. Revised Edition.

ERIC Educational Resources Information Center

Jernberg, Donald E.

The Salina Area Vocational Technical School has a special vocational program which provides selected vocational training courses for students with physical, emotional, or intellectual handicaps. The program offers vocational counseling, placement services, work evaluation, job readiness training, and vocational training tryouts. Vocational…

Teaching Professions. FasTrak.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus.

This document focuses on Ohio's need for a skilled workforce. It begins by introducing the Specialization Ohio Integrated Technical and Academic Competency (ITAC) profiles. Each Specialization ITAC represents a profile of the professional or occupational competencies deemed essential for a person to perform proficiently when graduating from the…

76 FR 50474 - Special Demonstration Programs-National Technical Assistance Projects To Improve Employment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-15

... its vocational rehabilitation (VR) programs. We intend the priority to increase the transfer... the field of rehabilitation that have national significance and to improve the performance of State VR... Technical Assistance and Continuing Education (TACE) centers, and State VR agencies. For example, the...

Problematics of different technical maintenance for computers

NASA Technical Reports Server (NTRS)

Dostalek, Z.

1977-01-01

Two modes of operations are used in the technical maintenance of computers: servicing provided by the equipment supplier, and that done by specially trained computer users. The advantages and disadvantages of both modes are discussed. Maintenance downtime is tabulated for two computers serviced by user employees over an eight year period.

Scientific and Technical Information in Canada, Part II, Chapter 6: Libraries.

ERIC Educational Resources Information Center

Science Council of Canada, Ottawa (Ontario).

The four types of libraries - special, academic, public, and school - collectively constitute a large part of the knowledge available in Canada. Consequently, a scientific and technical information network will be heavily dependent on these established library collections. Communications across the "type of library" boundaries is…

46 CFR Appendix B to Subpart C of... - Substance Technical Guidelines, Benzene

Code of Federal Regulations, 2013 CFR

2013-10-01

... Subpart C of Part 197—Substance Technical Guidelines, Benzene I. Physical and Chemical Data (a) Substance...) Extinguishing media: Carbon dioxide, dry chemical, or foam. (5) Special fire fighting procedures: Do not use a... engineering). (b) Reactivity. (1) Conditions contributing to instability: Heat. (2) Incompatibility: Heat and...

44 CFR 65.15 - List of communities submitting new technical data.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 44 Emergency Management and Assistance 1 2011-10-01 2011-10-01 false List of communities... Program IDENTIFICATION AND MAPPING OF SPECIAL HAZARD AREAS § 65.15 List of communities submitting new technical data. This section provides a cumulative list of communities where modifications of the base flood...

78 FR 38949 - Computer Security Incident Coordination (CSIC): Providing Timely Cyber Incident Response

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-28

... information as part of the research needed to write a NIST Special Publication (SP) to help Computer Security.... The NIST SP will identify technical standards, methodologies, procedures, and processes that facilitate prompt and effective response. This RFI requests information regarding technical best practices...

25 CFR 1200.41 - What types of technical assistance are available?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What types of technical assistance are available? 1200.41 Section 1200.41 Indians OFFICE OF THE SPECIAL TRUSTEE FOR AMERICAN INDIANS, DEPARTMENT OF THE INTERIOR...; selection of investment managers; monitoring of investments; asset management; or other assistance...

25 CFR 1200.41 - What types of technical assistance are available?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What types of technical assistance are available? 1200.41 Section 1200.41 Indians OFFICE OF THE SPECIAL TRUSTEE FOR AMERICAN INDIANS, DEPARTMENT OF THE INTERIOR...; selection of investment managers; monitoring of investments; asset management; or other assistance...

25 CFR 1200.41 - What types of technical assistance are available?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What types of technical assistance are available? 1200.41 Section 1200.41 Indians OFFICE OF THE SPECIAL TRUSTEE FOR AMERICAN INDIANS, DEPARTMENT OF THE INTERIOR...; selection of investment managers; monitoring of investments; asset management; or other assistance...

25 CFR 1200.41 - What types of technical assistance are available?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 2 2012-04-01 2012-04-01 false What types of technical assistance are available? 1200.41 Section 1200.41 Indians OFFICE OF THE SPECIAL TRUSTEE FOR AMERICAN INDIANS, DEPARTMENT OF THE INTERIOR...; selection of investment managers; monitoring of investments; asset management; or other assistance...

24 CFR 570.402 - Technical assistance awards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... (24 CFR part 571); and the Special Purpose Grants for Insular Areas, Community Development Work Study... the assistance is limited to conferences/workshops attended by more than one unit of government. (d... section include: (1) In the case of technical assistance for States, the cost of carrying out the...

24 CFR 570.402 - Technical assistance awards.

Code of Federal Regulations, 2013 CFR

2013-04-01

... (24 CFR part 571); and the Special Purpose Grants for Insular Areas, Community Development Work Study... the assistance is limited to conferences/workshops attended by more than one unit of government. (d... section include: (1) In the case of technical assistance for States, the cost of carrying out the...

24 CFR 570.402 - Technical assistance awards.

Code of Federal Regulations, 2012 CFR

2012-04-01

... (24 CFR part 571); and the Special Purpose Grants for Insular Areas, Community Development Work Study... the assistance is limited to conferences/workshops attended by more than one unit of government. (d... section include: (1) In the case of technical assistance for States, the cost of carrying out the...

Technical Assistance to Early Interventionists in Rural Areas: An Empirical Evaluation.

ERIC Educational Resources Information Center

Cooper, Carolyn S.; McEvoy, Mary A.

This study assessed the effectiveness of a model for providing long distance technical assistance on teacher implementation of an intervention designed to increase child-child social interaction. Subjects were 10 preschool special education teachers and 40 preschool-aged children (some developing normally and some with mild to moderate…

Developing Literacy for the Vocational-Technical Trades.

ERIC Educational Resources Information Center

Penisten, John

The University of Hawaii at Hilo offers a vocational-technical occupational reading curriculum that encourages literacy for technology. The program is geared to meet the special needs of enrollees in the university's trade and industry division, most of whom are postsecondary open-admission students. Most have poor reading skills, averaging a…

76 FR 31356 - Notice of Proposed Information Collection for Public Comment; Technical Assistance Experience...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-31

... Matrices AGENCY: Office of the Community Planning and Development. ACTION: Notice of proposed information..., Expertise, and Awards Received Matrices. Description of the need for the information proposed: The Technical Assistance Experience, Expertise, and Awards Received Matrices will allow the Office of Special Needs...

Statistical Indicators of Scientific and Technical Communication (1960-1980), 1977 Edition.

ERIC Educational Resources Information Center

King, D. W.; And Others

This report describes results of the second year of research in developing statistical indicators of scientific and technical communication. This effort placed special emphasis on the periodical literature including new estimates of the number of journals and other periodicals, characteristics of journals, journal prices, number of subscribers,…

77 FR 28393 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Initial Review

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

... Support Post Earthquake Reconstruction, Cholera and HIV/AIDS Response, FOA GH12-001, and Research and Technical Assistance for Public Health Laboratories in Haiti to Support Post Earthquake Reconstruction... and Technical Assistance for Public Health Interventions in Haiti to Support Post Earthquake...

Scientific and Technical Information Output of the Langley Research Center, for calendar year 1976

NASA Technical Reports Server (NTRS)

1976-01-01

Documents listed include NASA Technical Reports, Technical Notes, Technical Memorandums, Special Publications, Contractor Reports, journal articles, and technical presentations made at Society meetings. NASA formal reports listed are those that were mailed and distributed to the ultimate user. The material presented here is listed first by Division and then under the following headings: (a) Formal Reports, (b) Contractor Reports, (c) Articles and Meeting Presentations, and (d) High Number Technical Memorandums (High TMX's). Under each heading, the material cited authors in alphabetical order. If a report has more than one author and these authors are from different Divisions, the report is listed only once, under the senior author's name.

Early variability in the conceptualisation of "sustainable development and human factors".

PubMed

Thatcher, Andrew

2012-01-01

The sub-discipline of "sustainable development and human factors" is relatively new, first being used in 2006 with a Technical Committee of the IEA being established only in 2009 and a similar special interest group on "green ergonomics" at the Institute of Ergonomics and Human Factors being established in 2010. In general though, the definitions and practice of "sustainable development" is highly contentious and ambiguous across a range of disciplines. This paper examines the diversity of definitions and approaches to sustainable development and human factors in the early papers in this sub-discipline. An examination of 45 chapters and papers (from 2008 to 2011) reveals a surprising consistency in the definitions used for sustainable development but also a large proportion of the papers where no definitions are given at all. The majority of papers were, however, biased towards an economic capital and social capital emphasis, which is to be expected of work traditionally in the ergonomics paradigm. Further, most papers were theoretical in nature demonstrating a great opportunity for empirical work. The variability in definitions is discussed in relation to the future challenges facing the growth of this emergent sub-discipline and opportunities for further theoretical and empirical work.

Toward the light field display: autostereoscopic rendering via a cluster of projectors.

PubMed

Yang, Ruigang; Huang, Xinyu; Li, Sifang; Jaynes, Christopher

2008-01-01

Ultimately, a display device should be capable of reproducing the visual effects observed in reality. In this paper we introduce an autostereoscopic display that uses a scalable array of digital light projectors and a projection screen augmented with microlenses to simulate a light field for a given three-dimensional scene. Physical objects emit or reflect light in all directions to create a light field that can be approximated by the light field display. The display can simultaneously provide many viewers from different viewpoints a stereoscopic effect without head tracking or special viewing glasses. This work focuses on two important technical problems related to the light field display; calibration and rendering. We present a solution to automatically calibrate the light field display using a camera and introduce two efficient algorithms to render the special multi-view images by exploiting their spatial coherence. The effectiveness of our approach is demonstrated with a four-projector prototype that can display dynamic imagery with full parallax.

Captive breeding of pangolins: current status, problems and future prospects

PubMed Central

Hua, Liushuai; Gong, Shiping; Wang, Fumin; Li, Weiye; Ge, Yan; Li, Xiaonan; Hou, Fanghui

2015-01-01

Abstract Pangolins are unique placental mammals with eight species existing in the world, which have adapted to a highly specialized diet of ants and termites, and are of significance in the control of forest termite disaster. Besides their ecological value, pangolins are extremely important economic animals with the value as medicine and food. At present, illegal hunting and habitat destruction have drastically decreased the wild population of pangolins, pushing them to the edge of extinction. Captive breeding is an important way to protect these species, but because of pangolin’s specialized behaviors and high dependence on natural ecosystem, there still exist many technical barriers to successful captive breeding programs. In this paper, based on the literatures and our practical experience, we reviewed the status and existing problems in captive breeding of pangolins, including four aspects, the naturalistic habitat, dietary husbandry, reproduction and disease control. Some recommendations are presented for effective captive breeding and protection of pangolins. PMID:26155072

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.

Preface The Twelfth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 20-22, 1987. The year ending December 1986 was very difficult for the domestic geothermal industry. Low oil prices caused a sharp drop in geothermal steam prices. We expected to see some effect upon attendance at the Twelfth Workshop. To our surprise, the attendance was up by thirteen from previous years, with one hundred and fifty-seven registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, Japan, Mexico, New Zealand, and Turkey. Despite a worldwide surplus of oil, international geothermal interest and development is growingmore » at a remarkable pace. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Seven technical papers not presented at the Workshop are also published; they concern geothermal developments and research in Iceland, Italy, and New Zealand. In addition to these forty-eight technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was John R. Berg from the Department of Energy. We thank him for sharing with the Workshop participants his thoughts on the expectations of this agency in the role of alternative energy resources, specifically geothermal, within the country???s energy framework. His talk is represented as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: M. Gulati, K. Goyal, G.S. Bodvarsson, A.S. Batchelor, H. Dykstra, M.J. Reed, A. Truesdell, J.S. Gudmundsson, and J.R. Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank Jean Cook, Marilyn King, Amy Osugi, Terri Ramey, and Rosalee Benelli for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment, specially Jim Lovekin. The Twelfth Workshop was supported by the Geothermal Technology Division of the U. S. Department of Energy through Contract Nos. DE-AS03-80SF11459 and DE-AS07- 84ID12529. We deeply appreciate this continued support. January 1987 Henry J. Ramey, Jr. Paul Kruger Roland N. Horne William E. Brigham Frank G. Miller Jesus Rivera« less

Publications of the Jet Propulsion Laboratory, January through December 1974. [deep space network, Apollo project, information theory, and space exploration

NASA Technical Reports Server (NTRS)

1975-01-01

Formalized technical reporting is described and indexed, which resulted from scientific and engineering work performed, or managed, by the Jet Propulsion Laboratory. The five classes of publications included are technical reports, technical memorandums, articles from the bimonthly Deep Space Network Progress Report, special publications, and articles published in the open literature. The publications are indexed by author, subject, and publication type and number.

[Mapping of information on worker's health].

PubMed

Guimarães, Raul Borges; Ribeiro, Helena

2010-12-01

Geographic studies and spatial analyses have been recognized in Brazilian public health papers. It is still, however, very little explored by researchers. In a survey of the leading scientific journals covering issues related to Brazilian worker's health, we found the predominant use of charts and tables as a way to organize and present results with a small number of maps. This survey was conducted by examining all papers published in four journals, covering the period from 1967 to 2009 (Revista de Saúde Pública, Cadernos de Saúde Pública, Revista Saúde e Sociedade, and Revista Brasileira de Epidemiologia). After analyzing the set of papers selected for the study, the papers that used maps were given special attention. The tools of geoprocessing and geostatistics with GIS support, although little used, open new possibilities to use thematic cartography in the field of workers' health. However, it is recommended that editors of scientific journals have detailed technical standards as well as specific reports for the publication of cartographic figures aimed at facilitating the modifications necessary for the improvement of the visual quality of maps and of the spatial correlations through cartography.

Inoculating against Jargonitis

ERIC Educational Resources Information Center

Sword, Helen

2012-01-01

Every discipline has its own specialized language, its membership rites, its secret handshake. In its most benign and neutral definition, jargon signifies "the technical terminology or characteristic idiom of a special activity or group." More often, however, the jingly word that Chaucer used to describe "the inarticulate utterance of birds" takes…

The Market Linkage Project for Special Education: A Project Update.

ERIC Educational Resources Information Center

Bulford, Sally; Daniels, Carol

1982-01-01

The procedure for marketing special education materials developed by government money is detailed, and the array of technical assistance activities offered by LINC Resources is described. Material criteria is considered in terms of such aspects as timeliness, target audiences, effectiveness data, and product format. (CL)

Employment Opportunities and Job Analysis for Selected Environmental Occupations.

ERIC Educational Resources Information Center

Stitt, Thomas R.

Clusters of environmental occupations have been surveyed to identify and describe those occupations at the professional, technical, skilled, semi-skilled, and unskilled levels. The duties and responsibilities, special knowledge, and special skills required are listed for each. Occupational clusters covered are (1) applied biological and…

Special Education in High School Redesign

ERIC Educational Resources Information Center

National High School Center, 2011

2011-01-01

This annotated bibliography, co-authored by the National High School Center and the National Secondary Transition Technical Assistance Center, identifies articles that address high school redesign as it relates to students with disabilities and special education's role in such initiatives. The articles are organized around the National High School…

78 FR 28221 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Initial Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-14

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Initial Review The meeting announced below concerns Youth Violence Training and Technical Assistance, Funding Opportunity Announcement...

[European Union regulatory and quality requirements for botanical drugs and their implications for Chinese herbal medicinal products development].

PubMed

Zhu, You-Ping

2017-06-01

This paper introduces regulatory pathways and characteristic quality requirements for marketing authorization of herbal medicinal products in the European Union（EU）, and the legal status and applications of "European Union list of herbal substances, preparations and combinations" and "European Union herbal monographs". Also introduced are Chinese herbs that have been granted the EU list entry, those with EU herbal monographs, and registered EU traditional herbal medicinal products with Chinese herbs as active ingredients. Special attention is paid to the technical details of three authorized EU herbal medicinal products (Veregen, Sativex and Episalvan) in comparison with Andrographis paniculata extract HMPL-004 that failed the phase Ⅲ clinical trial for ulcerative colitis. The paper further emphasizes the importance of enriching active fractions of herbal extracts and taking regulatory and quality considerations into account in early stage of botanical drug development. Copyright© by the Chinese Pharmaceutical Association.

Thermal Diffusivity for III-VI Semiconductor Melts at Different Temperatures

NASA Technical Reports Server (NTRS)

Ban, H.; Li, C.; Lin, B.; Emoto, K.; Scripa, R. N.; Su, C.-H.; Lehoczky, S. L.

2004-01-01

The change of the thermal properties of semiconductor melts reflects the structural changes inside the melts, and a fundamental understanding of this structural transformation is essential for high quality semiconductor crystal growth process. This paper focused on the technical development and the measurement of thermal properties of III-VI semiconductor melts at high temperatures. Our previous work has improved the laser flash method for the specialized quartz sample cell. In this paper, we reported the results of our recent progress in further improvements of the measurement system by minimizing the free convection of the melt, adding a front IR detector, and placing the sample cell in a vacuum environment. The results for tellurium and selenium based compounds, some of which have never been reported in the literature, were obtained at different temperatures as a function of time. The data were compared with other measured thermophysical properties to shed light on the structural transformations of the melt.

Critical Review of Industrial Techniques for Thermal-Conductivity Measurements of Thermal Insulation Materials

NASA Astrophysics Data System (ADS)

Hammerschmidt, Ulf; Hameury, Jacques; Strnad, Radek; Turzó-Andras, Emese; Wu, Jiyu

2015-07-01

This paper presents a critical review of current industrial techniques and instruments to measure the thermal conductivity of thermal insulation materials, especially those insulations that can operate at temperatures above and up to . These materials generally are of a porous nature. The measuring instruments dealt with here are selected based on their maximum working temperature that should be higher than at least . These instruments are special types of the guarded hot-plate apparatus, the guarded heat-flow meter, the transient hot-wire and hot-plane instruments as well as the laser/xenon flash devices. All technical characteristics listed are quoted from the generally accessible information of the relevant manufacturers. The paper includes rankings of the instruments according to their standard retail price, the maximum sample size, and maximum working temperature, as well as the minimum in their measurement range.

Triangulation-based edge measurement using polyview optics

NASA Astrophysics Data System (ADS)

Li, Yinan; Kästner, Markus; Reithmeier, Eduard

2018-04-01

Laser triangulation sensors as non-contact measurement devices are widely used in industry and research for profile measurements and quantitative inspections. Some technical applications e.g. edge measurements usually require a configuration of a single sensor and a translation stage or a configuration of multiple sensors, so that they can measure a large measurement range that is out of the scope of a single sensor. However, the cost of both configurations is high, due to the additional rotational axis or additional sensor. This paper provides a special measurement system for measurement of great curved surfaces based on a single sensor configuration. Utilizing a self-designed polyview optics and calibration process, the proposed measurement system allows an over 180° FOV (field of view) with a precise measurement accuracy as well as an advantage of low cost. The detailed capability of this measurement system based on experimental data is discussed in this paper.

Technical Writing: Past, Present, and Future.

ERIC Educational Resources Information Center

Mathes, J. C., Comp.; Pinelli, Thomas E., Comp.

This compilation of papers addresses the history, present status, and trends of technical and related writing. The first of the eight papers surveys the present environment of the technical report and assesses the effectiveness of the technical report format of the National Aeronautics and Space Administration (NASA) in transmitting information.…

[Design of Complex Cavity Structure in Air Route System of Automated Peritoneal Dialysis Machine].

PubMed

Quan, Xiaoliang

2017-07-30

This paper introduced problems about Automated Peritoneal Dialysis machine(APD) that the lack of technical issues such as the structural design of the complex cavities. To study the flow characteristics of this special structure, the application of ANSYS CFX software is used with k-ε turbulence model as the theoretical basis of fluid mechanics. The numerical simulation of flow field simulation result in the internal model can be gotten after the complex structure model is imported into ANSYS CFX module. Then, it will present the distribution of complex cavities inside the flow field and the flow characteristics parameter, which will provide an important reference design for APD design.

Third Annual Foreign Acquisitions Workshop: Improving Access to Foreign Gray Literature

NASA Technical Reports Server (NTRS)

1993-01-01

The theme of the Third Annual Foreign Acquisitions Workshop was the acquisition of and access to foreign (non-U.S.) gray literature. Individual presentations addressed general topics related to the value and scope of gray literature, specialized and foreign gray-literature sources, intellectual property issues, and U.S. Federal Agency activities. Additional topics focused on electronic access and evaluation techniques and the current and potential uses of networking technology. The workshop papers are presented in their entirety or in abstract or outline form. Appendices include a listing of databases that include foreign gray literature, a bibliography, and a report on U.S.-Japan cooperation in the use of scientific and technical information.

Autonomous On-Board Calibration of Attitude Sensors and Gyros

NASA Technical Reports Server (NTRS)

Pittelkau, Mark E.

2007-01-01

This paper presents the state of the art and future prospects for autonomous real-time on-orbit calibration of gyros and attitude sensors. The current practice in ground-based calibration is presented briefly to contrast it with on-orbit calibration. The technical and economic benefits of on-orbit calibration are discussed. Various algorithms for on-orbit calibration are evaluated, including some that are already operating on board spacecraft. Because Redundant Inertial Measurement Units (RIMUs, which are IMUs that have more than three sense axes) are almost ubiquitous on spacecraft, special attention will be given to calibration of RIMUs. In addition, we discuss autonomous on board calibration and how it may be implemented.

Design criteria of the bolometer diagnostic for steady-state operation of the W7-X stellaratora)

NASA Astrophysics Data System (ADS)

Zhang, D.; Burhenn, R.; Koenig, R.; Giannone, L.; Grodzki, P. A.; Klein, B.; Grosser, K.; Baldzuhn, J.; Ewert, K.; Erckmann, V.; Hirsch, M.; Laqua, H. P.; Oosterbeek, J. W.

2010-10-01

A bolometric diagnostic system with features necessary for steady-state operation in the superconducting stellarator W7-X was designed. During a pulse length of 1800 s with an ECRH (electron cyclotron resonance heating) power of 10 MW, the components suffer not only from a large thermal load but also from stray radiation of the nonabsorbed isotropic microwaves. This paper gives an overview of the technical problems encountered during the design work and the solutions to individual problems to meet the special requirements in W7-X, e.g., component thermal protection, detector offset thermal drift suppression, as well as a microwave shielding technique.

Overview of Selection Process for Most Influential Paper of the 1970's

NASA Technical Reports Server (NTRS)

Hayes, Peggy S.; Moser, Kelsey M.

2011-01-01

Slides are for a presentation at the AIAA AFM conference invited session titled, 'AFM Most Influential Papers of the 1970's'. The slides describe the selection process used by the members of the technical committee to select the finalists and winning paper. The slides refer to technical papers published in the past, but have no technical data contained within them.

Optical legacy of Imperial College London

NASA Astrophysics Data System (ADS)

Kidger Webb-Moore, Tina E.

2016-10-01

The Industrial Revolution, beginning primarily in the UK, generated an increasing need for highly skilled technical people. Throughout the 19th century, technical instruction increased dramatically and the formation of schools specializing in science and technology grew quickly. In England, there was much motivation in favour of a national prestige center for science and technology centered in London. Central among the motivating forces was Queen Victoria's husband, Prince Albert. Although there were already existing specialist science and technology institutions in major English cities, the growth of superior institutions in other countries within Europe, especially Germany and the Charlottenburg area of Berlin (e.g., the Berlin Technical High School), encouraged important English dignitaries to become more competitive with continental Europe. As a result of this strong continental motivation, several science and technology institutions were built in the south Kensington part of London during the latter half of the 19th century. Imperial College, founded at the start of the 20th century, was a culmination and consolidation of several of these 19th century English institutions. Optical science and technology was an early beneficiary of the founding of Imperial College. This paper will attempt to provide the reader with an understanding of how great was the influence of the optical section of Imperial College in the further development of the world's optical science and technology.

Mars Colony in situ resource utilization: An integrated architecture and economics model

NASA Astrophysics Data System (ADS)

Shishko, Robert; Fradet, René; Do, Sydney; Saydam, Serkan; Tapia-Cortez, Carlos; Dempster, Andrew G.; Coulton, Jeff

2017-09-01

This paper reports on our effort to develop an ensemble of specialized models to explore the commercial potential of mining water/ice on Mars in support of a Mars Colony. This ensemble starts with a formal systems architecting framework to describe a Mars Colony and capture its artifacts' parameters and technical attributes. The resulting database is then linked to a variety of ;downstream; analytic models. In particular, we integrated an extraction process (i.e., ;mining;) model, a simulation of the colony's environmental control and life support infrastructure known as HabNet, and a risk-based economics model. The mining model focuses on the technologies associated with in situ resource extraction, processing, storage and handling, and delivery. This model computes the production rate as a function of the systems' technical parameters and the local Mars environment. HabNet simulates the fundamental sustainability relationships associated with establishing and maintaining the colony's population. The economics model brings together market information, investment and operating costs, along with measures of market uncertainty and Monte Carlo techniques, with the objective of determining the profitability of commercial water/ice in situ mining operations. All told, over 50 market and technical parameters can be varied in order to address ;what-if; questions, including colony location.

Quality assesment of mie 2009 sarajevo conference presentations.

PubMed

Masic, Izet; Kulasin, Igor; Muhamedagic, Belma; Valjevac, Salih

2010-01-01

XXII European Congress of Medical Informatics (MIe 2009) took place in Sarajevo from August 30th to September 2nd 2009. Assessment of quality of papers presented at MIe 2009 was a process of observation, measurement, comparison and evaluation of the quality of orally presented papers. For this study, and for the first time since EFMI founding (1976) and MIE congresses, the authors introduced a specially created quality assessment form with five relevant paper quality variables (methodological approach, international influence, scientific content, language quality, technical features) which the first author of this article used in peer-review process of papers submitted for publication in the journal Acta Informatica Medica (as Editor-in-Chief for last 18 years). The survey was conducted on the principle of random sampling of participants of MIE 2009 Conference in Sarajevo, where specially trained interviewers (final year students of medicine and engineering at the University of Sarajevo) interviewed 33 session's chairs and 110 participants/listeners of MIE 2009 paper presentations in 33 sessions (of total 40). Data was collected, entered into a specially created database, analyzed and presented. From the total of 150 oral presentations at the MIE 2009, 110 oral presentations were graded by both chairs and participants/ listeners. Grading results were compared and we found that in 60% of cases (66 papers) session chairs gave higher ratings than other participants of the congress. The highest rating was 10, and the lowest 3. Only 3 of the papers received all four grades 10 from the session chairs. The most common grade given by chairs of the session was 8 (26.36%), followed by 7 (20%), 9 (19.32%), 6 (13.18%), 10 and 5 (7.50%), 4 (5%) and 3 (1.14%). Significant differences in quality assessment of papers done by chairs and those done by other participants/listeners are observed. This work should demonstrate the importance of introducing universal (uniform) scale for assessment of articles at conferences that would provide objective and relevant assessment, which has not been the practice. Results obtained using a single standardized scale can be compared to each other and thus improve the quality of the articles and the congress. Future congresses can be organized in this manner and become leading events in certain fields of medical science.

FY 1991 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1991-01-01

Formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 1991 are presented. Papers of MSFC contractors are also included. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Fourth Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwantes, J. M.; Marsden, O.; Reilly, D.

Abstract The Nuclear Forensics International Technical Working Group is a community of nuclear forensic practitioners who respond to incidents involving nuclear and other radioactive material out of regulatory control. The Group is dedicated to advancing nuclear forensic science in part through periodic participation in materials exercises. The Group completed its fourth Collaborative Materials Exercise in 2015 in which laboratories from 15 countries and one multinational organization analyzed three samples of special nuclear material in support of a mock nuclear forensic investigation. This special section of the Journal for Radioanalytical and Nuclear Chemistry is devoted to summarizing highlights from this exercise.

Big data - smart health strategies. Findings from the yearbook 2014 special theme.

PubMed

Koutkias, V; Thiessard, F

2014-08-15

To select best papers published in 2013 in the field of big data and smart health strategies, and summarize outstanding research efforts. A systematic search was performed using two major bibliographic databases for relevant journal papers. The references obtained were reviewed in a two-stage process, starting with a blinded review performed by the two section editors, and followed by a peer review process operated by external reviewers recognized as experts in the field. The complete review process selected four best papers, illustrating various aspects of the special theme, among them: (a) using large volumes of unstructured data and, specifically, clinical notes from Electronic Health Records (EHRs) for pharmacovigilance; (b) knowledge discovery via querying large volumes of complex (both structured and unstructured) biological data using big data technologies and relevant tools; (c) methodologies for applying cloud computing and big data technologies in the field of genomics, and (d) system architectures enabling high-performance access to and processing of large datasets extracted from EHRs. The potential of big data in biomedicine has been pinpointed in various viewpoint papers and editorials. The review of current scientific literature illustrated a variety of interesting methods and applications in the field, but still the promises exceed the current outcomes. As we are getting closer towards a solid foundation with respect to common understanding of relevant concepts and technical aspects, and the use of standardized technologies and tools, we can anticipate to reach the potential that big data offer for personalized medicine and smart health strategies in the near future.

Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Waits, J. E. Turner (Compiler)

2001-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 2000. It also includes papers of MSFC contractors. After being announced in STAR, all the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 1998 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Waits, J. E. Turner (Compiler)

1999-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC (Marshall Space Flight Center) personnel in FY98. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

The Effect of Field Specialization Variation on Technological Pedagogical Content Knowledge (TPACK) among Malaysian TVET Instructors

ERIC Educational Resources Information Center

Chua, Junnaina Husin; Jamil, Hazri

2014-01-01

Technological Knowledge is directly related to productivity, enhanced performance and service quality. Technology integration in the Technical and Vocational Education and Training (TVET) curriculum is expected due to high application of technical knowledge and technology applications. TPACK is a professional knowledge framework that gives…

76 FR 17027 - Special Regulation: Areas of the National Park System, National Capital Region

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-28

... various government agencies involved against possible effects upon the exercise of First Amendment... for Change: The technical amendment is needed to provide the public with the new address of the... requirements in the Code of Federal Regulations. This technical amendment also conforms to the long-standing...

What is Technical English, American Style?

ERIC Educational Resources Information Center

Sims, Diana Mae

The rise of American English as the medium for exhange of scientific and technical information worldwide is a linguistic phenomenon. For some time, applied linguists in Britain have provided texts to meet the demand for English for special purposes and English for science and technology. Their works use a British form of language and cover British…

Examining Co-Teaching through a Socio-Technical Systems Lens

ERIC Educational Resources Information Center

Isherwood, Robert S.; Barger-Anderson, Richard; Erickson, Matthew

2012-01-01

Qualitative research was conducted in a large suburban school district implementing co-teaching as a new service delivery model for special education. Researchers examined the changes that resulted from the new service delivery model using a socio-technical systems lens. This framework views schools as open systems that contain a structural, task,…

Unified Technical Concepts. Module 10: Transducers.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This concept module on transducers is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy system.…

47 CFR 80.275 - Technical Requirements for Class A Automatic Identification System (AIS) equipment.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Technical Requirements for Class A Automatic Identification System (AIS) equipment. 80.275 Section 80.275 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Equipment Authorization for Compulsory Ships § 80.275...

Using Television Technology to Teach Technical Writing.

ERIC Educational Resources Information Center

Wallisch, Bill

Technical writing teachers at the U.S. Air Force Academy enhance student motivation by bringing real Air Force writing situations into the classroom through short videotapes which allow students to see how scientists and engineers cope with report writing in their daily work. Also, a special English honors course, which is part of the "Blue…

Unified Technical Concepts. Module 13: Radiation.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This concept module on radiation is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy system.…

[The 80-th anniversary of the use of an operating microscope in otorhinolaryngology. Part II. Technical principle and operation of surgical microscope].

PubMed

Mroczkowski, Edward; Wielgosz, Romuald

2004-01-01

The first step to microsurgery is getting to know about technical principle and operation of the surgical microscopes. Special attention is paid to those modules and items of microscopes, which surgeon use most frequently, such as objectives, binocular tubes, eyepieces.

Unified Technical Concepts. Module 5: Resistance.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This concept module on resistance is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy system.…

Administrative Office Technology. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document presents the Ohio Integrated Technical and Academic Competency (ITAC) profile for administrative office technology, which is a comprehensive listing of 58 occupational skill competencies deemed essential for Ohio graduates of programs in office technology. The document begins with an introduction to the ITAC system, a list of…

Metric Conversion in the Construction Industries--Technical Issues and Status.

ERIC Educational Resources Information Center

Milton, Hans J.; Berry, Sandra A.

This Special Publication was prepared at the request of the Metric Symposium Planning Committee of the National Institute of Building Sciences (NIBS). It is intended to provide information on technical issues and status of metric conversion in the United States construction industries. It was made available to attendees at the NIBS Symposium on…

Unified Technical Concepts. Module 12: Time Constants.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This concept module on time constants is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy…

Unified Technical Concepts. Module 11: Vibrations and Waves.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This concept module on vibrations and waves is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy…

Unified Technical Concepts. Module 9: Energy Convertors.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This concept module on energy convertors is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy…

Report of the Education Technical Subcommittee on Food/Beverage Occupations.

ERIC Educational Resources Information Center

Oregon State Dept. of Education, Salem. Div. of Vocational Education.

Written by a technical committee of persons from industry, professional associations, and labor, as well as persons with special expertise, state officials, and educators in Oregon, this document lists the skills and knowledge required of employees in food and beverage occupations. It also identifies the industry standards (performance objectives)…

Supporting Minority-Serving Institutions in Their Program Improvement Efforts: A Responsive Technical Assistance Approach

ERIC Educational Resources Information Center

Bay, Mary; Lopez-Reyna, Norma A.; Guillory, Barbara L.

2012-01-01

To reform a special education teacher preparation program can be gratifying, difficult, complex, political, and urgently needed. The Monarch Center, a federally funded technical assistance center, was established to guide and support minority-serving institutions in their efforts to improve their teacher preparation programs. Four guidelines…

Unified Technical Concepts. Module 8: Force Transformers.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This concept module on force transformers is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy…

Special Project for Research Training in Vocational Education: Research Training Series. Final Report.

ERIC Educational Resources Information Center

Vivian, Neal E.

To upgrade research and research utilization competence of vocational educators, The Center for Vocational and Technical Education and The American Vocational Association planned four 1-week research training programs on: (1) Planning Vocational/Technical Education Programs Based on Manpower Research, (2) Patterns of Career Development as Applied…

Unified Technical Concepts. Module 1: Force.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This concept module on force is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy system. This…

Unified Technical Concepts. Module 6: Power.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This concept module on power is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy system. In this…

Technical Processing Librarians in the 1980's: Current Trends and Future Forecasts.

ERIC Educational Resources Information Center

Kennedy, Gail

1980-01-01

This review of recent and anticipated advances in library automation technology and methodology includes a review of the effects of OCLC, MARC formatting, AACR2, and increasing costs, as well as predictions of the impact on library technical processing of networking, expansion of automation, minicomputers, specialized reference services, and…

Marketing Technology. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). Revised.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This document presents the Ohio Integrated Technical and Academic Competency profile for marketing technology. The profile is to serve as the basis for curriculum development in Ohio's secondary, adult, and postsecondary programs. The profile includes a comprehensive listing of 580 specialty and foundation key indicators for evaluating mastery of…

Unified Technical Concepts. Module 7: Potential and Kinetic Energy.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This concept module on potential and kinetic energy is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each…

The Impact of Special Education Law on Career and Technical Education

ERIC Educational Resources Information Center

Dieterich, Cynthia A.; Smith, Kristian J.

2015-01-01

Career and technical education (CTE) provides students of all ability levels the opportunity to develop skills for a post-secondary career. When students with disabilities are included in CTE, educators are legally required to provide an appropriate program that meets each student's unique needs. There are, however, few discussions in the…

Unified Technical Concepts. Module 2: Work.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This concept module on work is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy system. In this…

Unified Technical Concepts. Module 3: Rate.

ERIC Educational Resources Information Center

Technical Education Research Center, Waco, TX.

This concept module on rate is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy system. This…

5 CFR 2641.301 - Statutory exceptions and waivers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... statement based on his own special knowledge in the particular area that is the subject of the statement... employee has special knowledge concerning a subject area if he is familiar with the subject area as a... character, such as technical or engineering information relating to the natural sciences. The exception does...

5 CFR 2641.301 - Statutory exceptions and waivers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... statement based on his own special knowledge in the particular area that is the subject of the statement... employee has special knowledge concerning a subject area if he is familiar with the subject area as a... character, such as technical or engineering information relating to the natural sciences. The exception does...

14 CFR § 1201.401 - Special document depositories.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Special document depositories. § 1201.401 Section § 1201.401 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION STATEMENT OF... provides the National Technical Information Service (NTIS), U.S. Department of Commerce, 5285 Port Royal...

75 FR 66385 - Notice of Availability: Notice of Funding Availability (NOFA) for Fiscal Year 2010; Special Needs...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-28

... programs, Homeless Management Information System (HMIS) data collection, reporting and research, including..., HUD. ACTION: Notice. SUMMARY: HUD announces the availability of the applicant information, deadline information, and other requirements for the Fiscal Year (FY) 2010 Special Needs Assistance Programs Technical...

29 CFR 825.800 - Special rules for airline flight crew employees, general.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., DEPARTMENT OF LABOR OTHER LAWS THE FAMILY AND MEDICAL LEAVE ACT OF 1993 Special Rules Applicable to Airline..., the calculation of leave for those employees, and the recordkeeping requirements for employers of those employees, and are issued pursuant to the Airline Flight Crew Technical Corrections Act (AFCTCA...

29 CFR 825.800 - Special rules for airline flight crew employees, general.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., DEPARTMENT OF LABOR OTHER LAWS THE FAMILY AND MEDICAL LEAVE ACT OF 1993 Special Rules Applicable to Airline..., the calculation of leave for those employees, and the recordkeeping requirements for employers of those employees, and are issued pursuant to the Airline Flight Crew Technical Corrections Act (AFCTCA...

Special Report on Ingested Inorganic Arsenic: Skin Cancer; Nutritional Essentiality (Sab Review Draft)

EPA Science Inventory

A technical panel of EPA's Risk Assessment Forum has studied three special issues regarding certain health effects, particularly skin cancer, associated with arsenic ingestion: (1) the validity of the Taiwan study and its use for dose-response assessment in the U.S. population, (...

75 FR 68364 - Guidance for Industry and Food and Drug Administration Staff; Class II Special Controls Guidance...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-05

... European Protocol for the Quality Control of the Physical and Technical Aspects of Mammography Screening... entitled ``Physical Laboratory Testing, Breast Compression System'' to follow the Mammography Quality...] Guidance for Industry and Food and Drug Administration Staff; Class II Special Controls Guidance Document...

Evaluation of Young Children for Early Intervention and Early Childhood Special Education.

ERIC Educational Resources Information Center

Allen, Diana

This technical assistance document provides guidelines for child assessment and eligibility determination for early intervention and early childhood special education programs in Oregon. An overview of the assessment process explains screening, eligibility evaluation, and assessment for the Individual Family Service Plan (IFSP). Legal requirements…

ERCMExpress. Volume 2, Issue 1

ERIC Educational Resources Information Center

US Department of Education, 2006

2006-01-01

This issue of the Emergency Response and Crisis Management (ERCM) Technical Assistance Center's "ERCMExpress" focuses on integrating students with special needs and disabilities into emergency response and crisis management planning. Meeting the needs of students with disabilities and special needs in the event of an emergency does not have to be…

Precision Machining. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). 2002 Revision.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This publication provided the competencies and key indicators for a program that enables students to prepare for a number of occupations within the broader metalworking industry. Specializations include machinist, computer numerical control programmers, and maintenance and machine builders. Competencies and the related key indicators are presented…

76 FR 64010 - Special Rules Governing Certain Information Obtained Under the Clean Air Act: Technical Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... natural gas. 211112 Natural gas liquid extraction facilities. Petrochemical Production 32511 Ethylene.... Suppliers of Natural Gas and NGLs 221210 Natural gas distribution facilities. 211112 Natural gas liquid... Gas Reporting Rule, which are provided in the Special Rules Governing Certain Information Obtained...

Introducing Development Education in Technical Universities: Successful Experiences in Spain

ERIC Educational Resources Information Center

Boni, A.; Perez-Foguet, A.

2008-01-01

This paper presents and analyses the main characteristics of successful experiences of Development Education (DE) introduced in two major Spanish Technical Universities (Technical University of Catalonia, TUC, and Technical University of Valencia, TUV) during the nineties and the beginning of the twenty-first century. In this paper, after a brief…

Lake States regional forest resources assessment: technical papers.

Treesearch

Henry H. Webster; J. Michael Vasievich

1997-01-01

Contains 21 technical working papers prepared for the Lake States regional forest resources assessment, Lake States Forestry Alliance 1995. They represent significant contributions from many individuals and organizations and form the technical background for the assessment.

Application of metal hydride paper to simple pressure generator for use in soft actuator systems.

PubMed

Ino, Shuichi; Sakaki, Kouji; Hosono, Minako; Doi, Kouki; Shimada, Shigenobu; Chikai, Manabu

2015-01-01

Metal hydride (MH) actuators have a simple structure and a number of features that make them attractive for use in rehabilitation engineering and assistive technology. The MH actuator provides a high power-to-weight ratio, high-strain actuation, human-compatible softness, and noiseless operation, while being environmentally benign. On the other hand, there remain technical challenges to be overcome to improve the MH actuator regarding its speed of operation and energy efficiency, given the low heat conductivity of the MH powder that is used as the pressure generator for soft actuation. To overcome the issues of low heat conductivity and the handling of MH powder, we developed an MH paper, which is a special paper incorporating MH powder and carbon fiber, for use as a new pressure-generating element for a soft MH actuator system. In addition, the basic properties and structure of the proposed MH paper were investigated through scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and several thermodynamic experiments. The results of these experiments showed that the hydrogen absorption and desorption rates of the MH paper were significantly higher than those of the MH powder around room temperature.

FY 1995 Scientific and Technical Reports, Articles, Papers, and Presentations, Volume 1

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1995-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY95. It also includes papers of MSFC contractors. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

The FY 1992 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1992-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY92. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 1988 scientific and technical reports, articles, papers and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1988-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 88. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the NationaL Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY87 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1987-01-01

The document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY87. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, Va. 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

FY 1996 Scientific and Technical Reports, Articles, Papers, and Presentations. Volume 1

NASA Technical Reports Server (NTRS)

Turner-Waits, Joyce E. (Compiler)

1996-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY96. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Fiscal year 1993 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1993-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY93. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Teaching foreign languages to technical students by means of educational online technologies

NASA Astrophysics Data System (ADS)

Ivleva, Natalia V.; Fibikh, Ekaterina V.

2015-01-01

The article reveals new methods of effectiveness increase in teaching foreign languages to technical students using information and communication technologies and their practical implementation at the premises of the Foreign Languages Resource Center of Siberian State Aerospace University. Adoption of information and communication technologies to the educational process is based on students' independent language learning that encourages more productive development of language competences mastered by students and future specialists in a special area of technical knowledge as a whole.

FY 1994 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1994-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by Marshall Space Flight Center personnel in FY94. It also includes papers of MSFC contractors and author indexes. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Special issue containing papers presented at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (7-11 September 2011) Special issue containing papers presented at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (7-11 September 2011)

NASA Astrophysics Data System (ADS)

Berk, H. L.

2012-09-01

The topic of the behaviour of energetic alpha particles in magnetic fusion confined plasmas is perhaps the ultimate frontier plasma physics issue that needs to be understood in the quest to achieve controlled power from the fusion reaction in magnetically confined plasmas. The partial pressure of alpha particles in a burning plasma will be ~5-10% of the total pressure and under these conditions the alpha particles may be prone to develop instability through Alfvénic interaction. This may lead, even with moderate alpha particle loss, to a burn quench or severe wall damage. Alternatively, benign Alfvénic signals may allow the vital information to control a fusion burn. The significance of this issue has led to extensive international investigations and a biannual meeting that began in Kyiv in 1989, followed by subsequent meetings in Aspenäs (1991), Trieste (1993), Princeton (1995), JET/Abingdon (1997), Naka (1999), Gothenburg (2001), San Diego (2003), Takayama (2005), Kloster Seeon (2007) and Kyiv (2009). The meeting was initially entitled 'Alpha Particles in Fusion Research' and then was changed during the 1997 meeting to 'Energetic Particles in Magnetic Confinement Systems' in appreciation of the need to study the significance of the electron runaway, which can lead to the production of energetic electrons with energies that can even exceed the energy produced by fusion products. This special issue presents some of the mature interesting work that was reported at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems, which was held in Austin, Texas, USA (7-11 September 2011). This meeting immediately followed a related meeting, the 5th IAEA Technical Meeting on Theory of Plasma Wave Instabilities (5-7 September 2011). The meetings shared one day (7 September 2011) with presentations relevant to both groups. The presentations from most of the participants, as well as some preliminary versions of papers, are available at the websites [1, 2]. To view a presentation or paper, go to the link 'program', view the list or speakers and poster presenters and press 'talk' or 'paper' under the appropriate name. Summaries of the Energetic Particle Conference presentations were given by Kazuo Toi and Boris Breizman. They respectively discussed the experimental and theoretical progress presented at the meeting. Their presentations can be viewed on the 'iaeaep' website [1], by pressing 'Summary-I (or II)' by each of their names. Highlights of this meeting include the tremendous progress that has been achieved in the development of diagnostics that enables the 'viewing' of internal fluctuations and allows comparison with theoretical predictions, as demonstrated, for example, in the talks of P. Lauber and M. Osakabe. The need and development of hardened diagnostics in the severe radiation environment, such as those that will exist in ITER, was discussed in the talks of V. Kiptiley and V.A. Kazakhov. In theoretical studies, much of the effort is focused on nonlinear phenomena. For example, detailed comparison of theory and experiment on D-III-D on the n = 0 geodesic mode was reported in separate papers by R. Nazikian and G. Fu. A large number of theoretical papers were presented on wave chirping including a paper by B.N. Breizman, which notes that continual wave chirping from a single frequency may emanate continuously once marginal stability conditions have been established. Another area of wide interest was the detailed study of alpha orbits in a burning plasma, where losses can come from perturbations from perfect toroidal symmetry arising from finite coil number, magnetic field imperfections introduced by diagnostic or test modules and from instability. An important area of development, covered by M.A. Hole and D.A. Spong, is concerned with the self-consistent treatment of the induced fields that accounts for responses beyond vacuum field perturbations or a pure toroidally symmetric MHD response. In addition, a significant number of studies focused on understanding nonlinear behaviour by means of computer simulation of energetic particle driven instability. An under-represented area of investigation was the study of electron runaway formation during major tokamak disruptions. It was noted in an overview by S. Putvinski that electron energies in the 10-20 MeV range is to be expected during projected major disruptions in ITER and that reliable methods for mitigation of the runaway process needs to be developed. Significant recent work in the field of the disruption induced electron runaway, which was reported by J. Riemann, does not appear in this special issue of Nuclear Fusion as the work had been previously submitted to Physics of Plasmas [3]. Overall it is clear that reliable mitigation of electron runaway is an extremely important topic that is in need of better understanding and solutions. It has been my pleasure to serve as the organizer of the 12th meeting and to serve as a Guest Editor of this issue of Nuclear Fusion. I am sure that the contents of this issue will serve as a valuable research guide to the field of energetic particle behaviour in a burning plasma for many years to come. The site of the next meeting will by Beijing, China in the fall of 2013, which will be organized by Zinghong Lin. References [1] Program 2011 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (Austin, Texas, USA, 7-11 September 2011) http://w3fusion.ph.utexas.edu/ifs/iaeaep/program.html [2] Program 2011 5th IAEA Technical Meeting on Theory of Plasma Wave Instabilities (Austin, Texas, USA, 5-7 September 2011) http://w3fusion.ph.utexas.edu/ifs/iaeapi/program.html [3] Riemann J., Smith H.M. and Helander P. 2012 Phys. Plasmas 19 012507

25 CFR 547.7 - What are the minimum technical hardware standards applicable to Class II gaming systems?

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF CLASS II GAMES § 547.7 What are the minimum technical hardware standards applicable to Class II... the game, and are specially manufactured or proprietary and not off-the-shelf, shall display a unique... outcome or integrity of any game, progressive award, financial instrument, cashless transaction, voucher...

25 CFR 547.7 - What are the minimum technical hardware standards applicable to Class II gaming systems?

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF CLASS II GAMES § 547.7 What are the minimum technical hardware standards applicable to Class II... the game, and are specially manufactured or proprietary and not off-the-shelf, shall display a unique... outcome or integrity of any game, progressive award, financial instrument, cashless transaction, voucher...

25 CFR 547.7 - What are the minimum technical hardware standards applicable to Class II gaming systems?

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF CLASS II GAMES § 547.7 What are the minimum technical hardware standards applicable to Class II... the game, and are specially manufactured or proprietary and not off-the-shelf, shall display a unique... outcome or integrity of any game, progressive award, financial instrument, cashless transaction, voucher...

Revamped NPS Brings More Focus to CTE Issues

ERIC Educational Resources Information Center

Techniques: Connecting Education and Careers (J3), 2008

2008-01-01

In March, attendees at the annual ACTE National Policy Seminar (NPS) got more than they bargained for. With a new hotel and a completely reorganized agenda, career and technical educators were more than energized to bring the career and technical education (CTE) message to Capitol Hill. This year marked the first time ACTE held a special briefing…

The Impact of Gender on Interest in Science Topics and the Choice of Scientific and Technical Vocations

ERIC Educational Resources Information Center

Buccheri, Grazia; Gurber, Nadja Abt; Bruhwiler, Christian

2011-01-01

Many countries belonging to the Organisation for Economic Co-operation and Development (OECD) note a shortage of highly qualified scientific-technical personnel, whereas demand for such employees is growing. Therefore, how to motivate (female) high performers in science or mathematics to pursue scientific careers is of special interest. The sample…

Reading Teacher's Text Selection for Industrial Arts and Other Technical Fields.

ERIC Educational Resources Information Center

Matt, Stephen R.

To provide learners with the most reliable information, individuals and committees responsible for text selection examine texts for classroom use in steps. Since very few people have the specialized knowledge of all the technical fields like drafting, electronics, or graphics that make up the field of Industrial Arts, a committee is required to…

Criminal Justice. [FasTrak Specialization Integrated Technical and Academic Competency (ITAC).] 2002 Revision.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Career-Technical and Adult Education.

This curriculum for a criminal justice program is designed for students interested in pursuing a future in law enforcement or a related public safety profession. The criminal justice program in the career-technical and adult education center is a two-year curriculum that is divided into these 14 units: orientation; legal aspects; communication…

Construction Mechanic, Engine Tune-Up I, 8-7. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This course, adapted from military curriculum materials for use in vocational and technical education, teaches students to perform a complete engine tune-up using appropriate hand tools, special tools, and testing equipment. Students completing the course will be able to diagnose gasoline-engine performance and perform corrective measures to…

The Image of Career and Technical Education. Practice Application Brief.

ERIC Educational Resources Information Center

Brown, Bettina Lankard

Career and technical education (CTE) instructors can use four strategies to present a new image of CTE as a viable strategy for education and work. Strategy 1 is to give students something to brag about. Three ways to help students see their vocational studies as unique and special opportunities for satisfying and rich experiences are to provide…

INSTITUTE ON CRITICAL ISSUES IN VOCATIONAL AND TECHNICAL TEACHER EDUCATION IN SMALL COLLEGES AND UNIVERSITIES. CENTER SEMINAR AND CONFERENCE REPORT NO. 8.

ERIC Educational Resources Information Center

BELL, A.P.

THIRTY PARTICIPANTS INCLUDING TEACHER EDUCATORS AND ADMINISTRATORS ATTENDED A 2-WEEK TEACHER EDUCATION INSTITUTE DESIGNED TO CONSIDER CRITICAL ISSUES IN VOCATIONAL AND TECHNICAL EDUCATION AND THEIR IMPLICATIONS FOR PROGRAMS OF TEACHER PREPARATION IN SMALL COLLEGES AND UNIVERSITIES. THE PRESENTATIONS BY SPECIAL CONSULTANTS WERE--(1) "CRITICAL…

Jobs for Which Junior College, Technical Institute, or Other Specialized Training Is Usually Required.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Selected from the "Occupational Outlook Handbook," the listings included in this document represent a number of occupations for which junior college or other special training is useful. Each listing, grouped under a broader occupational area, provides a specific occupational title, number employed in the occupation in 1974, qualifications and…

A Survey on the Use of Microcomputers in Special Libraries.

ERIC Educational Resources Information Center

Krieger, Tillie

1986-01-01

Describes a survey on the use of microcomputers in special libraries. The discussion of the findings includes types of hardware and software in use; applications in public services, technical processes, and administrative tasks; data back-up techniques; training received; evaluation of software; and future plans for microcomputer applications. (1…

Project COMPUOCC.LEP, 1988-89. Evaluation Section Report [and] Executive Summary. OREA Report.

ERIC Educational Resources Information Center

Berney, Tomi D.; Velasquez, Clara

Project COMPUOCC.LEP, a Title VII-funded program of instructional and support services, served 400 Hispanic students of limited English proficiency with special handicapping conditions. It also served 36 special education teachers at 14 Bronx (New York) intermediate and junior high schools, offering on-site technical assistance in curriculum…

82. View of specialized maintenance shop in transmitter building no. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

82. View of specialized maintenance shop in transmitter building no. 101, showing technical publications library and equipment logging trays. - Clear Air Force Station, Ballistic Missile Early Warning System Site II, One mile west of mile marker 293.5 on Parks Highway, 5 miles southwest of Anderson, Anderson, Denali Borough, AK

Role of Special Forces Liaison Elements in Future Multinational Operations

DTIC Science & Technology

2002-05-01

SOF simply with UW and the “old special-ops bugaboo of poor command and control and lack of coordination” that was displayed during Desert One, the...funding and allocating time for training and education in the areas of cultural, tactical, and technical expertise is not only a good investment for

Special Education Program Standards Study. Commonwealth of Virginia. Final Technical Report.

ERIC Educational Resources Information Center

Keith, Timothy Z.; And Others

This federally funded study investigated Virginia special education program standards, focusing on local applications of the standards for class size and class mix and the effect of varying class size and class mix on student outcomes. The study concentrated on students with educable mental retardation, severe emotional disturbance, and specific…

High-End Concept Based on Hypersonic Two-Stage Rocket and Electro-Magnetic Railgun to Launch Micro-Satellites Into Low-Earth

NASA Astrophysics Data System (ADS)

Bozic, O.; Longo, J. M.; Giese, P.; Behren, J.

2005-02-01

The electromagnetic railgun technology appears to be an interesting alternative to launch small payloads into Low Earth Orbit (LEO), as this may introduce lower launch costs. A high-end solution, based upon present state of the art technology, has been investigated to derive the technical boundary conditions for the application of such a new system. This paper presents the main concept and the design aspects of such propelled projectile with special emphasis on flight mechanics, aero-/thermodynamics, materials and propulsion characteristics. Launch angles and trajectory optimisation analyses are carried out by means of 3 degree of freedom simulations (3DOF). The aerodynamic form of the projectile is optimised to provoke minimum drag and low heat loads. The surface temperature distribution for critical zones is calculated with DLR developed Navier-Stokes codes TAU, HOTSOSE, whereas the engineering tool HF3T is used for time dependent calculations of heat loads and temperatures on project surface and inner structures. Furthermore, competing propulsions systems are considered for the rocket engines of both stages. The structural mass is analysed mostly on the basis of carbon fibre reinforced materials as well as classical aerospace metallic materials. Finally, this paper gives a critical overview of the technical feasibility and cost of small rockets for such missions. Key words: micro-satellite, two-stage-rocket, railgun, rocket-engines, aero/thermodynamic, mass optimization

NASA Ares I Launch Vehicle Roll and Reaction Control Systems Lessons Learned

NASA Technical Reports Server (NTRS)

Butt, Adam; Popp, Chris G.; Jernigan, Frankie R.; Paseur, Lila F.; Pitts, Hank M.

2011-01-01

On April 15, 2010 President Barak Obama made the official announcement that the Constellation Program, which included the Ares I launch vehicle, would be canceled. NASA s Ares I launch vehicle was being designed to launch the Orion Crew Exploration Vehicle, returning humans to the moon, Mars, and beyond. It consisted of a First Stage (FS) five segment solid rocket booster and a liquid J-2X Upper Stage (US) engine. Roll control for the FS was planned to be handled by a dedicated Roll Control System (RoCS), located on the connecting interstage. Induced yaw or pitch moments experienced during FS ascent would have been handled by vectoring of the booster nozzle. After FS booster separation, the US Reaction Control System (ReCS) would have provided the US Element with three degrees of freedom control as needed. The lessons learned documented in this paper will be focused on the technical designs and producibility of both systems along with the partnership between NASA and Boeing, who was on contract to build the Ares I US Element, which included the FS RoCS and US ReCS. In regards to partnership, focus will be placed on integration along with technical work accomplished by Boeing with special emphasis on each task order. In summary, this paper attempts to capture key lessons learned that should be helpful in the development of future launch vehicle RCS designs.

Freight Transportation : A Digest of Technical Papers. Volume 1.

DOT National Transportation Integrated Search

1976-10-28

This volume contains a number of technical papers dealing with intercity freight transportation. Collectively, these systems-oriented papers consider a wide range of subject matter including transportation facilitation, commodity flow, regulation, au...

FY 1990 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1990-01-01

Formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY 90 are presented. Also included are papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from NTIS. The information may be of value to the scientific and engineering community in determining what information has been published and what is available.

Fiscal year 1977 scientific and technical reports, articles, papers, and presentations

NASA Technical Reports Server (NTRS)

White, O. L. (Compiler)

1977-01-01

This bibliography lists 78 NASA technical memoranda, notes, papers, and reports presented by Marshall Space Flight Center personnel in FY 1977. In addition, 525 papers by contractors to that facility are cited along with 129 papers cleared for presentation.

Science, information, technology, and the changing character of public policy in non-point source pollution

NASA Astrophysics Data System (ADS)

King, John L.; Corwin, Dennis L.

Information technologies are already delivering important new capabilities for scientists working on non-point source (NPS) pollution in the vadose zone, and more are expected. This paper focuses on the special contributions of modeling and network communications for enhancing the effectiveness of scientists in the realm of policy debates regarding NPS pollution mitigation and abatement. The discussion examines a fundamental shift from a strict regulatory strategy of pollution control characterized by a bureaucratic/technical alliance during the period through the 1970's and early 1980's, to a more recently evolving paradigm of pluralistic environmental management. The role of science and scientists in this shift is explored, with special attention to the challenges facing scientists working in NPS pollution in the vadose zone. These scientists labor under a special handicap in the evolving model because their scientific tools are often times incapable of linking NPS pollution with individuals responsible for causing it. Information can facilitate the effectiveness of these scientists in policy debates, but not under the usual assumptions in which scientific truth prevails. Instead, information technology's key role is in helping scientists shape the evolving discussion of trade-offs and in bringing citizens and policymakers closer to the routine work of scientists.

Technical Writing across the Curriculum: Epics.

ERIC Educational Resources Information Center

Olds, Barbara M.

Noting that technically competent graduates of professional schools need additional skills to function effectively in an increasingly complex and global society, this paper describes an innovative program in technical writing developed for undergraduate engineering students at the Colorado School of Mines. The paper first provides background…

High-level user interfaces for transfer function design with semantics.

PubMed

Salama, Christof Rezk; Keller, Maik; Kohlmann, Peter

2006-01-01

Many sophisticated techniques for the visualization of volumetric data such as medical data have been published. While existing techniques are mature from a technical point of view, managing the complexity of visual parameters is still difficult for non-expert users. To this end, this paper presents new ideas to facilitate the specification of optical properties for direct volume rendering. We introduce an additional level of abstraction for parametric models of transfer functions. The proposed framework allows visualization experts to design high-level transfer function models which can intuitively be used by non-expert users. The results are user interfaces which provide semantic information for specialized visualization problems. The proposed method is based on principal component analysis as well as on concepts borrowed from computer animation.

Advanced photoelectric effect experiment beamline at Elettra: A surface science laboratory coupled with Synchrotron Radiation.

PubMed

Panaccione, G; Vobornik, I; Fujii, J; Krizmancic, D; Annese, E; Giovanelli, L; Maccherozzi, F; Salvador, F; De Luisa, A; Benedetti, D; Gruden, A; Bertoch, P; Polack, F; Cocco, D; Sostero, G; Diviacco, B; Hochstrasser, M; Maier, U; Pescia, D; Back, C H; Greber, T; Osterwalder, J; Galaktionov, M; Sancrotti, M; Rossi, G

2009-04-01

We report the main characteristics of the advanced photoelectric effect experiments beamline, operational at Elettra storage ring, featuring a fully independent double branch scheme obtained by the use of chicane undulators and able to keep polarization control in both linear and circular mode. The paper describes the novel technical solutions adopted, namely, (a) the design of a quasiperiodic undulator resulting in optimized suppression of higher harmonics over a large photon energy range (10-100 eV), (b) the thermal stability of optics under high heat load via cryocoolers, and (c) the end station interconnected setup allowing full access to off-beam and on-beam facilities and, at the same time, the integration of users' specialized sample growth chambers or modules.

G-133: A soft x ray solar telescope

NASA Technical Reports Server (NTRS)

Williams, Memorie K.; Campbell, Branton; Roming, Peter W. A.; Spute, Mark K.; Moody, J. Ward

1992-01-01

The GOLDHELOX Project, NASA payload number G-133, is a robotic soft x ray solar telescope designed and built by an organization of undergraduate students. The telescope is designed to observe the sun at a wavelength of 171 to 181 A. Since we require observations free from atmospheric interference, the telescope will be launched in a NASA Get-Away-Special (GAS) canister with a Motorized Door Assembly (MDA). In this paper we primarily discuss the most important elements of the telescope itself. We also elaborate on some of the technical difficulties associated with doing good science in space on a small budget (about $100,000) and mention ways in which controlling the instrument environment has reduced the complexity of the system and thus saved us money.

Ultrasonography in gastroenterology.

PubMed

Ødegaard, Svein; Nesje, Lars B; Hausken, Trygve; Gilja, Odd Helge

2015-06-01

Ultrasonography (US) is a safe and available real-time, high-resolution imaging method, which during the last decades has been increasingly integrated as a clinical tool in gastroenterology. New US applications have emerged with enforced data software and new technical solutions, including strain evaluation, three-dimensional imaging and use of ultrasound contrast agents. Specific gastroenterologic applications have been developed by combining US with other diagnostic or therapeutic methods, such as endoscopy, manometry, puncture needles, diathermy and stents. US provides detailed structural information about visceral organs without hazard to the patients and can play an important clinical role by reducing the need for invasive procedures. This paper presents different aspects of US in gastroenterology, with a special emphasis on the contribution from Nordic scientists in developing clinical applications.

Learning How (and How Not) to Weld: Vocational Learning in Technical Vocational Education

ERIC Educational Resources Information Center

Asplund, Stig-Börje; Kilbrink, Nina

2018-01-01

This article focuses on vocational learning in technical vocational education in upper-secondary school, with a special focus on the object of learning to weld. A concrete teaching situation where the learning object to weld is the focus of the interaction between a vocational teacher and an upper-secondary student was documented by a video camera…

18 CFR 430.23 - Technical determinations and procedures.

Code of Federal Regulations, 2011 CFR

2011-04-01

... BASIN COMMISSION SPECIAL REGULATIONS GROUND WATER PROTECTION AREA: PENNSYLVANIA § 430.23 Technical... new or expanded ground water withdrawal, as required by §§ 430.11 and 430.13 of this part shall be as... considered (miles) 10,000 to 50,000 0.5 50,000 to 100,000 0.75 In excess of 100,000 1.0 (b) Ground water...

18 CFR 430.23 - Technical determinations and procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... BASIN COMMISSION SPECIAL REGULATIONS GROUND WATER PROTECTION AREA: PENNSYLVANIA § 430.23 Technical... new or expanded ground water withdrawal, as required by §§ 430.11 and 430.13 of this part shall be as... considered (miles) 10,000 to 50,000 0.5 50,000 to 100,000 0.75 In excess of 100,000 1.0 (b) Ground water...

Operation Greenhouse: Communications

DTIC Science & Technology

1951-01-01

jottication •__ By,. , Dtsl•-bution1 TECHNICAL REPORT mailability Code’s Avait and -or Dist Special COMMUNICATIONS OPERATION GREENHOUSE 1951 COMMANDED BY...stem GREENHOUSE to include technical informa- therefrom. tion and operational experience not desirable Details of operation, such as call sign, fre- for...Atomic planning, organization, and engineering for Weapons Proving Ground. Where, in this re- Operation GREENHOUSE , since the solution port, reference is

Review of Web-Based Technical Documentation Processes. FY07 NAEP-QA Special Study Report. TR-08-17

ERIC Educational Resources Information Center

Gribben, Monica; Wise, Lauress; Becker, D. E.

2008-01-01

Beginning with the 2000 and 2001 National Assessment of Educational Progress (NAEP) assessments, the National Center for Education Statistics (NCES) has made technical documentation available on the worldwide web at http://nces.ed.gov/nationsreportcard/tdw/. The web-based documentation is designed to be less dense and more accessible than prior…

The Aurora space launcher concept

NASA Astrophysics Data System (ADS)

Kopp, Alexander; Stappert, Sven; Mattsson, David; Olofsson, Kurt; Marklund, Erik; Kurth, Guido; Mooij, Erwin; Roorda, Evelyne

2017-11-01

This paper gives an overview about the Aurora reusable space launcher concept study that was initiated in late-2015/early-2016. Within the Aurora study, several spaceplane-like vehicle configurations with different geometries, propulsion systems and mission profiles will be designed, investigated and evaluated with respect to their technical and economic feasibility. The first part of this paper will discuss the study logic and the current status of the Aurora studies and introduces the first vehicle configurations and their system design status. As the identification of highly efficient structural designs is of particular interest for Aurora, the structural design and analysis approach will be discussed in higher level of detail. A special design feature of the Aurora vehicle configurations is the utilization of the novel thin-ply composite material technology for structural mass reductions. Therefore, the second part of this paper will briefly discuss this technology and investigate the application and potential mass savings on vehicle level within simplified structural analysis studies. The results indicate that significant mass savings could be possible. Finally, an outlook on the next steps is provided.

Scenario Development Process at the Vertical Motion Simulator

NASA Technical Reports Server (NTRS)

Reardon, Scott E.; Beard, Steven D.; Lewis, Emily

2017-01-01

There has been a significant effort within the simulation community to standardize many aspects of flight simulation. More recently, an effort has begun to develop a formal scenario definition language for aviation. A working group within the AIAA Modeling and Simulation Technical Committee has been created to develop a standard aviation scenario definition language, though much of the initial effort has been tailored to training simulators. Research and development (R&D) simulators, like the Vertical Motion Simulator (VMS), and training simulators have different missions and thus have different scenario requirements. The purpose of this paper is to highlight some of the unique tasks and scenario elements used at the VMS so they may be captured by scenario standardization efforts. The VMS most often performs handling qualities studies and transfer of training studies. Three representative handling qualities simulation studies and two transfer of training simulation studies are described in this paper. Unique scenario elements discussed in this paper included special out-the-window (OTW) targets and environmental conditions, motion system parameters, active inceptor parameters, and configurable vehicle math model parameters.

The Aurora space launcher concept

NASA Astrophysics Data System (ADS)

Kopp, Alexander; Stappert, Sven; Mattsson, David; Olofsson, Kurt; Marklund, Erik; Kurth, Guido; Mooij, Erwin; Roorda, Evelyne

2018-06-01

This paper gives an overview about the Aurora reusable space launcher concept study that was initiated in late-2015/early-2016. Within the Aurora study, several spaceplane-like vehicle configurations with different geometries, propulsion systems and mission profiles will be designed, investigated and evaluated with respect to their technical and economic feasibility. The first part of this paper will discuss the study logic and the current status of the Aurora studies and introduces the first vehicle configurations and their system design status. As the identification of highly efficient structural designs is of particular interest for Aurora, the structural design and analysis approach will be discussed in higher level of detail. A special design feature of the Aurora vehicle configurations is the utilization of the novel thin-ply composite material technology for structural mass reductions. Therefore, the second part of this paper will briefly discuss this technology and investigate the application and potential mass savings on vehicle level within simplified structural analysis studies. The results indicate that significant mass savings could be possible. Finally, an outlook on the next steps is provided.

Hospitality: A Teacher's Guide to an Employment Orientation Course for Special Needs Students.

ERIC Educational Resources Information Center

Grubb, Francine

This teachers' guide on hospitality is one of a series of six designed for the employment orientation program for special needs students at the Gloucester County Vocational-Technical School in Sewell, New Jersey. The series includes laundry, hospitality, sewing, basic business, foods, and beauty culture. The foreword indicates that objectives are…

International Labour Standards and Technical Co-Operation: The Case of Special Public Works Programmes.

ERIC Educational Resources Information Center

Mayer, Jean

1989-01-01

Applies international labor standards to results of the International Labour Office's special public works programs to discover whether program intentions have been met. Finds that while productive employment has been pursued, popular participation is not occurring and such issues as (1) forced labor, (2) child employment, and (3) inequality of…

Foods: A Teacher's Guide to an Employment Orientation Course for Special Needs Students.

ERIC Educational Resources Information Center

Grubb, Francine

This teacher's guide on foods is one of a series of six designed for the employment orientation program for special needs students at the Gloucester County Vocational-Technical School in Sewell, New Jersey. The series includes laundry, hospitality, sewing, basic business, foods, and beauty culture. Each guide contains lesson plans consisting of…

Sewing: A Teacher's Guide to an Employment Orientation Course for Special Needs Students.

ERIC Educational Resources Information Center

Grubb, Francine

This teacher's guide on sewing is one of a series of six designed for the employment orientation program for special needs students at the Gloucester County Vocational-Technical School in Sewell, New Jersey. The series includes laundry, hospitality, sewing, basic business, foods, and beauty culture. Each guide contains daily lesson plans…

Specialized Study Options U.S.A. A Guide to Short-Term Programs for Foreign Nationals.

ERIC Educational Resources Information Center

Connotillo, Barbara Cahn, Ed.; Johnson, Christine, Ed.

Short-term programs, from technical courses for beginners to executive development programs for professionals, are described that are accessible to or specially designed for foreign nationals. The 875 academic, vocational, and professional programs represent 17 major and 46 minor fields of study. For each program, information is provided on:…

Laundry: A Teacher's Guide to an Employment Orientation Course for Special Needs Students.

ERIC Educational Resources Information Center

Grubb, Francine

This teacher's guide on laundry is one of a series of six designed for the employment orientation program for special needs students at the Gloucester County Vocational-Technical School in Sewell, New Jersey. The series includes laundry, hospitality, sewing, basic business, foods, and beauty culture. Each guide contains lesson plans consisting of…

Jet Crackle

DTIC Science & Technology

2015-06-23

DISTRIBUTION/AVAILABILITY STATEMENT DISTRIBUTION A 13. SUPPLEMENTARY NOTES 14. ABSTRACT Fighter jets and other aircraft with high specific thrust engines...interim, memorandum, master’s thesis , progress, quarterly, research, special, group study, etc. 3. DATES COVERED. Indicate the time during which the...State the type of report, such as final, technical, interim, memorandum, master’s thesis , progress, quarterly, research, special, group study, etc

Beauty Culture: A Teacher's Guide to an Employment Orientation Course for Special Needs Students.

ERIC Educational Resources Information Center

Grubb, Francine

This teacher's guide on beauty culture is one of a series of six designed for the employment orientation program for special needs students at the Gloucester County Vocational-Technical School in Sewell, New Jersey. The series includes laundry, hospitality, sewing, basic business, food, and beauty culture. Each guide contains lesson plans…

Development of a NASA Integrated Technical Workforce Career Development Model Entitled Requisite Occupation Competencies and Knowledge -- the ROCK

NASA Technical Reports Server (NTRS)

Menrad, Robert J.; Larson, Wiley J.

2008-01-01

This paper shares the findings of NASA's Integrated Learning and Development Program (ILDP) in its effort to reinvigorate the HANDS-ON practice of space systems engineering and project/program management through focused coursework, training opportunities, on-the job learning and special assignments. Prior to March 2005, NASA responsibility for technical workforce development (the program/project manager, systems engineering, discipline engineering, discipline engineering and associated communities) was executed by two parallel organizations. In March 2005 these organizations merged. The resulting program-ILDP-was chartered to implement an integrated competency-based development model capable of enhancing NASA's technical workforce performance as they face the complex challenges of Earth science, space science, aeronautics and human spaceflight missions. Results developed in collaboration with NASA Field Centers are reported on. This work led to definition of the agency's first integrated technical workforce development model known as the Requisite Occupation Competence and Knowledge (the ROCK). Critical processes and products are presented including: 'validation' techniques to guide model development, the Design-A-CUrriculuM (DACUM) process, and creation of the agency's first systems engineering body-of-knowledge. Findings were validated via nine focus groups from industry and government, validated with over 17 space-related organizations, at an estimated cost exceeding $300,000 (US). Masters-level programs and training programs have evolved to address the needs of these practitioner communities based upon these results. The ROCK reintroduced rigor and depth to the practitioner's development in these critical disciplines enabling their ability to take mission concepts from imagination to reality.

Balanced scorecard: application in the General Panarcadian Hospital of Tripolis, Greece.

PubMed

Koumpouros, Yiannis

2013-01-01

The purpose of this paper is to discuss the application of the balanced scorecard (BSC) in the Greek public health sector. The basic balanced scorecard theory has been adopted in the characteristics and individualities of the Greek public health system. The theoretical model developed was applied in the General Panarcadian Hospital of Tripolis (GPHT) in Greece. GPHT is a representative paradigm of a big regional Greek public hospital. It has about 300 beds and many clinics and specialties (internal medicine, cardiology, general surgery, intensive care unit, artificial kidney unit, etc.). Strategic management was performed for almost three years. The BSC model was formulated in an appropriate software program. The problems (both technical and managerial) faced during a three-year period along with the results of this management approach are presented in the current paper. The paper highlights some important gaps in the Greek public health system, while proposing actions to be taken. The BSC theory can be very successful under certain conditions. Special attention is given to the peculiarities of the Greek public health situation. The paper presents for the first time a real life example of applying BSC in the Greek public health sector.

FY 1997 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Waits, J. E. Turner (Compiler)

1998-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY97. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Current principles and practice in autologous intraportal islet transplantation: a meta-analysis of the technical considerations.

PubMed

Kumar, Rohan; Chung, Wen Yuan; Dennison, Ashley Robert; Garcea, Giuseppe

2016-04-01

Autologous islet transplantation (IAT) following pancreatectomy is now a recognized, albeit highly specialized procedure carried out in a small number of centers worldwide. Current clinical principles and best practice with emphasis on examining the technical aspects of surgery in centers with significant IAT experience are reviewed. Literature search for studies discussing any technical aspect of pancreatectomy with intraportal IAT was included. Thirty-five papers were included; all were single-center case series. The indications, surgical approach to pancreatectomy with IAT, islet yield, static pancreas preservation prior to islet digestion, portal vein access, absolute islet infusion volumes, and portal venous pressure changes during transfusion evaluated. IAT is considered a "last resort" when alternative approaches have been exhausted. Pre-morbid histology and prior surgical drainage adversely influence islet yields and may influence the clinical decision to perform pancreatectomy and IAT. Following pancreas digestion, absolute numbers of islets recovered and smaller islet size predict rates of insulin independence following IAT. Islet volumes and portal venous pressure changes are important factors for the development of complications. Surgical access for IAT includes intra-operative, immediate or delayed infusion via an "exteriorized" vein, and radiological percutaneous approaches. Delayed infusion can be combined with pancreas preservation techniques prior to islet isolation. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Strengthening policy research on infant and young child feeding: An imperative to support countries in scaling up impact on nutrition.

PubMed

Menon, Purnima; Thow, Anne Marie

2017-06-13

Enabling policy environments for nutrition require require evidence to support best practice and engagement with political and policy contexts, as well as leadership, resourcing, advocacy, and technical support. However, research on nutrition policy contexts is limited. The papers in this special supplement on policy contexts for infant and young child feeding (IYCF) in South Asia makes a valuable contribution to understanding the policy landscape and political dynamics in the region and the global literature. Studies included in this special supplement analyzed policy content and stakeholder influence on IYCF in Bangladesh, India, Nepal, Pakistan and Sri Lanka, and assess the role of advocacy in addressing multiple elements of the policy environment. These analyses highlight opportunities to harmonize and manage the demands and interests of multiple actors while strengthening policy to strategically support optimal IYCF as the ultimate goal. They also provide robust examples of research on policy environments and policy change. Further investments in research on policy contexts for nutrition can help to understand and support continued progress towards improved actions for nutrition.

Characteristics of individuals with high information potential in government research and development organizations.

NASA Technical Reports Server (NTRS)

Holland, W. E.

1972-01-01

In order to study focal individuals within informal communications networks, a special variable was constructed: information potential (IP) was defined as the information-source value placed on an individual by his colleagues. Four hypotheses involving IP were tested in three R&D organizations using questionnaires and pencil-and-paper tests. Results indicated that the individual with high IP used more and different sources of technical information, was seen to be a credible information source and to have a strong ability to associate seemingly unrelated ideas, and was as approachable as the other members of his organization. Four tentative conclusions may be drawn from this study concerning the person with high IP. He is (1) an identifiable individual in several different kinds of organizations; (2) a distinctive information transceiver (transmitter and receiver); (3) both a producer and a catalyst in his own organization; and (4) an extender and an amplifier of information search. To affect the efficiency of informal information flow, the research manager's best hope for positively influencing informal networks lies in the identification and motivation of the special communicators in his organization.

Moving environmental DNA methods from concept to practice for monitoring aquatic macroorganisms

USGS Publications Warehouse

Goldberg, Caren S.; Strickler, Katherine M.; Pilliod, David S.

2015-01-01

The discovery that macroorganisms can be detected from their environmental DNA (eDNA) in aquatic systems has immense potential for the conservation of biological diversity. This special issue contains 11 papers that review and advance the field of eDNA detection of vertebrates and other macroorganisms, including studies of eDNA production, transport, and degradation; sample collection and processing to maximize detection rates; and applications of eDNA for conservation using citizen scientists. This body of work is an important contribution to the ongoing efforts to take eDNA detection of macroorganisms from technical breakthrough to established, reliable method that can be used in survey, monitoring, and research applications worldwide. While the rapid advances in this field are remarkable, important challenges remain, including consensus on best practices for collection and analysis, understanding of eDNA diffusion and transport, and avoidance of inhibition in sample collection and processing. Nonetheless, as demonstrated in this special issue, eDNA techniques for research and monitoring are beginning to realize their potential for contributing to the conservation of biodiversity globally.

On problems in defining abstract and metaphysical concepts--emergence of a new model.

PubMed

Nahod, Bruno; Nahod, Perina Vukša

2014-12-01

Basic anthropological terminology is the first project covering terms from the domain of the social sciences under the Croatian Special Field Terminology program (Struna). Problems that have been sporadically noticed or whose existence could have been presumed during the processing of terms mainly from technical fields and sciences have finally emerged in "anthropology". The principles of the General Theory of Terminology (GTT), which are followed in Struna, were put to a truly exacting test, and sometimes stretched beyond their limits when applied to concepts that do not necessarily have references in the physical world; namely, abstract and metaphysical concepts. We are currently developing a new terminographical model based on Idealized Cognitive Models (ICM), which will hopefully ensure a better cross-filed implementation of various types of concepts and their relations. The goal of this paper is to introduce the theoretical bases of our model. Additionally, we will present a pilot study of the series of experiments in which we are trying to investigate the nature of conceptual categorization in special languages and its proposed difference form categorization in general language.

Bio-threat preparedness: Need for a paradigm shift.

PubMed

Jindal, A K; Roy, Kaushik

2014-04-01

India of late has been vulnerable to Chemical, Biological, Radiological and Nuclear (CBRN) threat, on account of its unique geographic position. Biological threat is an imminent threat in the hands of a terrorist. The public health system of our country is overburdened due to its present role and bio-attack response is not a priority area. This paper suggests that as the prime focus is on the CR and N threats in the integrated CBRN preparedness strategy and that specialized and technical forces are needed to deal with a bio-threat; hence there is a need for a paradigm shift in policy. The emerging field of bio-threat needs to be delinked from the joint family of 'CBRN', with consequent structural and functional changes. A separate specialized cadre needs to be formed for dealing with bio-threat, created from the pool of doctors and non-medical scientists from the AFMS and the DRDO. Structural changes are needed in the organization, to bring in the resources of NCDC, New Delhi for enhanced disease surveillance capacity and creation of a bio-threat mitigation node in the AFMC, Pune.

Explanatory and illustrative visualization of special and general relativity.

PubMed

Weiskopf, Daniel; Borchers, Marc; Ertl, Thomas; Falk, Martin; Fechtig, Oliver; Frank, Regine; Grave, Frank; King, Andreas; Kraus, Ute; Müller, Thomas; Nollert, Hans-Peter; Rica Mendez, Isabel; Ruder, Hanns; Schafhitzel, Tobias; Schär, Sonja; Zahn, Corvin; Zatloukal, Michael

2006-01-01

This paper describes methods for explanatory and illustrative visualizations used to communicate aspects of Einstein's theories of special and general relativity, their geometric structure, and of the related fields of cosmology and astrophysics. Our illustrations target a general audience of laypersons interested in relativity. We discuss visualization strategies, motivated by physics education and the didactics of mathematics, and describe what kind of visualization methods have proven to be useful for different types of media, such as still images in popular science magazines, film contributions to TV shows, oral presentations, or interactive museum installations. Our primary approach is to adopt an egocentric point of view: The recipients of a visualization participate in a visually enriched thought experiment that allows them to experience or explore a relativistic scenario. In addition, we often combine egocentric visualizations with more abstract illustrations based on an outside view in order to provide several presentations of the same phenomenon. Although our visualization tools often build upon existing methods and implementations, the underlying techniques have been improved by several novel technical contributions like image-based special relativistic rendering on GPUs, special relativistic 4D ray tracing for accelerating scene objects, an extension of general relativistic ray tracing to manifolds described by multiple charts, GPU-based interactive visualization of gravitational light deflection, as well as planetary terrain rendering. The usefulness and effectiveness of our visualizations are demonstrated by reporting on experiences with, and feedback from, recipients of visualizations and collaborators.

Final priority; Technical Assistance on State Data Collection--IDEA Data Management Center. Final priority.

PubMed

2014-08-05

The Assistant Secretary for the Office of Special Education and Rehabilitative Services (OSERS) announces a priority under the Technical Assistance on State Data Collection program. The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. We take this action to fund a cooperative agreement to establish and operate an IDEA Data Management Center (Center) that will provide technical assistance (TA) to improve the capacity of States to meet the data collection requirements of the Individuals with Disabilities Education Act (IDEA).

PREFACE: 5th International Conference on Materials and Applications for Sensors and Transducers (IC-MAST2015)

NASA Astrophysics Data System (ADS)

Hristoforou, E.; Vlachos, D. S.; Giouroudi, I.; Kar-Narayan, S.; Potirakis, S.

2016-03-01

The 5th International Conference on Materials and Applications for Sensors and Transducers, Mykonos island, Greece, hosted about 110 oral and poster papers and more than 90 participants. IC-MAS, as an international annual conference which tries to meet the needs for various types of sensors, particularly those which may be manufactured by low cost methods (i.e. hybrid sensors, smart specialization devices, particular applications not necessarily requiring integrated micro-nano technologies), covering all types of materials and physical effects, appears to be a necessity. IC-MAST has been established as a high quality international conference by: I. Gathering together multinational researchers from all over the world, working in different materials for sensors and transducers and technical applications of sensors, but also in some cases in the management of the data coming from sensors and transducers. The careful selection of the conference place (like Aegean Sea, Budapest, Prague, Bilbao, Mykonos etc) allows for enjoying the local hospitality and sightseeing. II. Emphasizing in hybrid sensors and smart specialization devices produced by inexpensive methods, without excluding of course micro-nano technology, from all kinds of solid state, liquid and gaseous materials, as well as in particular transducer applications (design and development, as well as use of sensing data) III. Innovatively implementing the Virtual Paper Concept, allowing for large impact of research works presented in the conference by authors who either have no time or no funding support for visiting a conference; this year more than 12 virtual papers are presented in the 5th IC MAST, following a standardized procedure via the our robust and reliable Conference Site (www.icmast.net!) > IV. Allowing for lengthy technical and managerial discussions in terms of sensor, material and instrumentation development; furthermore, the different research groups gathered together are offered the particular advantage of arranging and concluding research proposals and projects, otherwise not having a visible possibility of such realization The 5th IC-MAST organizing committee is proud that the Conference Keynote Speaker was Prof George Hadjipanayis, University of Delaware. We are also proud for the invited speakers of the conference: • Stergios Logothetidis, Aristotle University of Thessaloniki, Greece • Dimitris Tsoukalas, National Technical University of Athens, Greece • Susana Cardoso de Freitas, INESC Microsistemas e Nanotecnologias • Yuris Dzenis, University of Nebraska-Lincoln, USA The IC-MAST 2015 organizers believe that the target of the Conference has been successfully met by enhancing knowledge in sensors by all participants, accelerating the achievement of results and optimizing the under design products, in a quite friendly way! Therefore, participants made an appointment for the next year in Athens, Greece, where the 6th International MAST Conference will be realized!

FY 1978 scientific and technical reports, articles, papers, and presentations. [bibliography

NASA Technical Reports Server (NTRS)

White, O. L. (Compiler)

1978-01-01

Abstracts of 73 technical papers published or presented by MSFC personnel in FY-78 are presented. In addition, over 400 papers by contractors to that facility are listed along with the STAR document number for each report. Titles of 208 additional papers already cleared for publication are included.

Introduction to the special issue on the technical status of materials for a fusion reactor

NASA Astrophysics Data System (ADS)

Stork, D.; Zinkle, S. J.

2017-09-01

Materials determine in a fundamental way the performance and environmental attractiveness of a fusion reactor: through the size (power fluxes to the divertor, neutron fluxes to the first wall); economics (replacement lifetime of critical in-vessel components, thermodynamic efficiency through operating temperature etc); plasma performance (erosion by plasma fluxes to the divertor surfaces); robustness against off-normal accidents (safety); and the effects of post-operation radioactivity on waste disposal and maintenance. The major philosophies and methodologies used to formulate programmes for the development of fusion materials are outlined, as the basis for other articles in this special issue, which deal with the fundamental understanding of the issues regarding these materials and their technical status and prospects for development.

Technical Education in Nigeria: The Way Forward. Summary of Proceedings of the Workshop on Technical Education: A Foundation for a Healthy Economy (Ota, Ogun State of Nigeria, March 1-2, 1994).

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

This summary of proceedings includes papers from and about a workshop on technical education in Nigeria and the lessons Nigeria may gain by examining the vocational and technical education systems of Germany, the United States, Great Britain, and Japan. The following papers are included: "Foreword" (Iyorchia Ayu); "Introduction: A…

Laparoscopic repair of inguinal hernia in adults

PubMed Central

Yang, Xue-Fei

2016-01-01

Laparoscopic repair of inguinal hernia is mini-invasive and has confirmed effects. The procedures include intraperitoneal onlay mesh (IPOM) repair, transabdominal preperitoneal (TAPP) repair and total extraperitoneal (TEP) repair. These procedures have totally different anatomic point of view, process and technical key points from open operations. The technical details of these operations are discussed in this article, also the strategies of treatment for some special conditions. PMID:27867954

Review Of Piping And Pressure Vessel Code Design Criteria. Technical Report 217.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

1969-04-18

This Technical Report summarizes a review of the design philosophies and criteria of the ASME Boiler and Pressure Vessel Code and the USASI Code for Pressure Piping. It traces the history of the Codes since their inception and critically reviews their present status. Recommendations are made concerning the applicability of the Codes to the special needs of LMFBR liquid sodium piping.

Bonding with the Nuclear Industry: A Technical Communication Professor and His Students Partner With Y-12 National Security Complex

ERIC Educational Resources Information Center

Hirst, Russel

2016-01-01

This article describes how a special kind of academe-industry collaboration--based on a joint appointment agreement between a university and an industry site--was set up, promoted, and experienced by a professor of technical communication and his student interns. To illustrate the nature and value of this kind of collaboration, the article…

Quality Concerns in Technical Education in India: A Quantifiable Quality Enabled Model

ERIC Educational Resources Information Center

Gambhir, Victor; Wadhwa, N. C.; Grover, Sandeep

2016-01-01

Purpose: The paper aims to discuss current Technical Education scenarios in India. It proposes modelling the factors affecting quality in a technical institute and then applying a suitable technique for assessment, comparison and ranking. Design/methodology/approach: The paper chose graph theoretic approach for quantification of quality-enabled…

36 CFR 8.3 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Professional sports instructors and entertainers. (h) The following employees, when approved by the Director... supply of available labor; employees whose employment requires special or technical training or skill...

The Placement of Secondary School Students with Statements of Special Educational Needs in the More Diversified System of English Secondary Schooling

ERIC Educational Resources Information Center

Norwich, Brahm; Black, Alison

2015-01-01

This article examines the pattern of placement of students with significant special educational needs at Statement and School Action Plus levels in English secondary schools, comparing sponsored and converter academies, maintained schools and the newly created free schools, studio schools and university technical colleges for 2013 and 2014. The…

Blueprint for a Needs Assessment: Contributing to a System of Care for Children with Special Needs & Their Families. A Technical Resource Brief.

ERIC Educational Resources Information Center

Ireys, Henry T.

Designed to guide and structure the needs assessment of Pennsylvania children with special health care needs, this document describes six specific steps in planning and conducting a needs assessment. The steps include: (1) stating the goals of the needs assessment, including fulfilling legislative mandates, identifying geographical areas that have…

Risks and Consequences of Oversimplifying Educational Inequities: A Response to Morgan et al. (2015)

ERIC Educational Resources Information Center

Skiba, Russell J.; Artiles, Alfredo J.; Kozleski, Elizabeth B.; Losen, Daniel J.; Harry, Elizabeth G.

2016-01-01

In this technical comment, we argue that Morgan et al.'s claim that there is no minority overrepresentation in special education is in error due to (a) sampling considerations, (b) inadequate support from previous and current analyses, and (c) their failure to consider the complexities of special education disproportionality. [For Morgan et al.'s…

LEP Students in Special High School Programs, 1987-88. Evaluation Section Report. OREA Report.

ERIC Educational Resources Information Center

Berney, Tomi D.; Asselle, Maria Grazia

The LEP (limited-English-proficient) Students in Special High Schools Program, funded from a variety of sources, was partially implemented in 1987-88. The program's aim was to provide 277 LEP students, whose native languages were Chinese, Haitian Creole/French, and Spanish, with equal access to 8 educational-option and 5 vocational/technical high…

Innovations and Future Directions for Early Numeracy Curriculum-Based Measurement: Commentary on the Special Series, Part 2

ERIC Educational Resources Information Center

Methe, Scott A.

2012-01-01

The purpose of this extended commentary article is to frame the set of studies in the first of two issues and recommend areas of inquiry for future research. This special series issue features studies examining the technical qualities of formative assessment procedures that were developed to inform intervention. This article intends to emphasize…

A catalog of NASA special publications

NASA Technical Reports Server (NTRS)

1981-01-01

A list of all of the special publications released by NASA are presented. The list includes scientific and technical books covering a wide variety of topics, including much of the agencies research and development work, its full range of space exploration programs, its work in advancing aeronautics technology, and many associated historical and managerial efforts. A total of 1200 titles are presented.

[The theme of disaster in health care: profile of technical and scientific production in the specialized database on disasters of the Virtual Health Library - VHL].

PubMed

Rocha, Vania; Ximenes, Elisa Francioli; Carvalho, Mauren Lopes de; Alpino, Tais de Moura Ariza; Freitas, Carlos Machado de

2014-09-01

In the specialized database of the Virtual Health Library (VHL), the DISASTER database highlights the importance of the theme for the health sector. The scope of this article is to identify the profiles of technical and scientific publications in the specialized database. Based on systematic searches and the analysis of results it is possible to determine: the type of publication; the main topics addressed; the most common type of disasters mentioned in published materials, countries and regions as subjects, historic periods with the most publications and the current trend of publications. When examining the specialized data in detail, it soon becomes clear that the number of major topics is very high, making a specific search process in this database a challenging exercise. On the other hand, it is encouraging that the disaster topic is discussed and assessed in a broad and diversified manner, associated with different aspects of the natural and social sciences. The disaster issue requires the production of interdisciplinary knowledge development to reduce the impacts of disasters and for risk management. In this way, since the health sector is a interdisciplinary area, it can contribute to knowledge production.

A critical review of principal traffic noise models: Strategies and implications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garg, Naveen, E-mail: ngarg@mail.nplindia.ernet.in; Department of Mechanical, Production and Industrial Engineering, Delhi Technological University, Delhi 110042; Maji, Sagar

2014-04-01

The paper presents an exhaustive comparison of principal traffic noise models adopted in recent years in developed nations. The comparison is drawn on the basis of technical attributes including source modelling and sound propagation algorithms. Although the characterization of source in terms of rolling and propulsion noise in conjunction with advanced numerical methods for sound propagation has significantly reduced the uncertainty in traffic noise predictions, the approach followed is quite complex and requires specialized mathematical skills for predictions which is sometimes quite cumbersome for town planners. Also, it is sometimes difficult to follow the best approach when a variety ofmore » solutions have been proposed. This paper critically reviews all these aspects pertaining to the recent models developed and adapted in some countries and also discusses the strategies followed and implications of these models. - Highlights: • Principal traffic noise models developed are reviewed. • Sound propagation algorithms used in traffic noise models are compared. • Implications of models are discussed.« less

Considerations for RTCA Phase 2 Low Size, Weight, and Power (SWAP) Surveillance Requirements. UAS Integration in the NAS

NASA Technical Reports Server (NTRS)

Santiago, Confesor

2017-01-01

RTCA (Radio Technical Commission for Aeronautics) Special Committee 228 has initiated a second phase for the development of minimum operational performance standards (MOPS) for UAS (Unmanned Aircraft Systems) detect and avoid (DAA) systems. Technologies to enable UAS with less available Size, Weight, and Power (SWaP) will be considered. A white paper is in development for what topics and issues need to be addressed to develop DAA requirements for low SWAP surveillance systems. This briefing will document the issues to be investigated in SC-228. It will also serve as a review with the committee to get feedback so the white paper can be written and finalized. These topics and issues are not necessarily all the things that NASA will contribute to SC-228 during Phase 2, but what the overall committee needs to accomplish. A portion of the work will be in NASA's UAS in the NAS (National Airspace System) project plan.

An Overview of the Semi-Span Super-Sonic Transport (S4T) Wind-Tunnel Model Program

NASA Technical Reports Server (NTRS)

Silva, Walter A.; Perry, Boyd, III; Florance, James R.; Sanetrik, Mark D.; Wieseman, Carol D.; Stevens, William L.; Funk, Christie J.; Christhilf, David M.; Coulson, David A.

2012-01-01

A summary of computational and experimental aeroelastic (AE) and aeroservoelastic (ASE) results for the Semi-Span Super-Sonic Transport (S4T) wind-tunnel model is presented. A broad range of analyses and multiple AE and ASE wind-tunnel tests of the S4T wind-tunnel model have been performed in support of the ASE element in the Supersonics Program, part of the NASA Fundamental Aeronautics Program. This paper is intended to be an overview of multiple papers that comprise a special S4T technical session. Along those lines, a brief description of the design and hardware of the S4T wind-tunnel model will be presented. Computational results presented include linear and nonlinear aeroelastic analyses, and rapid aeroelastic analyses using CFD-based reduced-order models (ROMs). A brief survey of some of the experimental results from two open-loop and two closed-loop wind-tunnel tests performed at the NASA Langley Transonic Dynamics Tunnel (TDT) will be presented as well.

Implementing DSpace at NASA Langley Research Center

NASA Technical Reports Server (NTRS)

Lowe, Greta

2007-01-01

This presentation looks at the implementation of the DSpace institutional repository system at the NASA Langley Technical Library. NASA Langley Technical Library implemented DSpace software as a replacement for the Langley Technical Report Server (LTRS). DSpace was also used to develop the Langley Technical Library Digital Repository (LTLDR). LTLDR contains archival copies of core technical reports in the aeronautics area dating back to the NACA era and other specialized collections relevant to the NASA Langley community. Extensive metadata crosswalks were created to facilitate moving data from various systems and formats to DSpace. The Dublin Core metadata screens were also customized. The OpenURL standard and Ex Libris Metalib are being used in this environment to assist our customers with either discovering full-text content or with initiating a request for the item.

Cryogenic hydrogen-induced air liquefaction technologies

NASA Technical Reports Server (NTRS)

Escher, William J. D.

1990-01-01

Extensively utilizing a special advanced airbreathing propulsion archives database, as well as direct contacts with individuals who were active in the field in previous years, a technical assessment of cryogenic hydrogen-induced air liquefaction, as a prospective onboard aerospace vehicle process, was performed and documented. The resulting assessment report is summarized. Technical findings are presented relating the status of air liquefaction technology, both as a singular technical area, and also that of a cluster of collateral technical areas including: compact lightweight cryogenic heat exchangers; heat exchanger atmospheric constituents fouling alleviation; para/ortho hydrogen shift conversion catalysts; hydrogen turbine expanders, cryogenic air compressors and liquid air pumps; hydrogen recycling using slush hydrogen as heat sink; liquid hydrogen/liquid air rocket-type combustion devices; air collection and enrichment systems (ACES); and technically related engine concepts.

Wicked Problems in Special and Inclusive Education

ERIC Educational Resources Information Center

Armstrong, David

2017-01-01

This special paper provides a critical overview of wicked problems in special and inclusive education. Practically, this paper provides a strategic framework for future special issues in the "Journal of Special Educational Needs". Critical attention is also given to the concept of a wicked problem when applied to research in special and…

Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Turner, J. E. (Compiler)

2000-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY99. It also includes papers of MSFC contractors. All of the NASA series reports may be obtained from the NASA Center for AeroSpace Information (CASI), 7121 Standard Drive, Hanover, MD 21076-1320 The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Final priority; technical assistance to improve state data capacity--National Technical Assistance Center to improve state capacity to accurately collect and report IDEA data. Final priority.

PubMed

2013-05-20

The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Technical Assistance to Improve State Data Capacity program. The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2013 and later years. We take this action to focus attention on an identified national need to provide technical assistance (TA) to States to improve their capacity to meet the data collection and reporting requirements of the Individuals with Disabilities Education Act (IDEA). We intend this priority to establish a TA center to improve State capacity to accurately collect and report IDEA data (Data Center).

48 CFR 642.271 - Government Technical Monitor (GTM).

Code of Federal Regulations, 2014 CFR

2014-10-01

... MANAGEMENT CONTRACT ADMINISTRATION AND AUDIT SERVICES Contract Administration Services 642.271 Government..., or because of special skills or knowledge necessary for monitoring the contractor's work. The...

48 CFR 642.271 - Government Technical Monitor (GTM).

Code of Federal Regulations, 2012 CFR

2012-10-01

... MANAGEMENT CONTRACT ADMINISTRATION AND AUDIT SERVICES Contract Administration Services 642.271 Government..., or because of special skills or knowledge necessary for monitoring the contractor's work. The...

48 CFR 642.271 - Government Technical Monitor (GTM).

Code of Federal Regulations, 2013 CFR

2013-10-01

... MANAGEMENT CONTRACT ADMINISTRATION AND AUDIT SERVICES Contract Administration Services 642.271 Government..., or because of special skills or knowledge necessary for monitoring the contractor's work. The...

48 CFR 17.605 - Award, renewal, and extension.

Code of Federal Regulations, 2010 CFR

2010-10-01

... CONTRACTING METHODS AND CONTRACT TYPES SPECIAL CONTRACTING METHODS Management and Operating Contracts 17.605... prospective contractor's technical and managerial capacity are sufficient, that organizational conflicts of...

Trainees' perceptions of practitioner competence during patient transfer.

PubMed

Grierson, Lawrence; Dubrowski, Adam; So, Steph; Kistner, Nicole; Carnahan, Heather

2012-01-01

Technical and communicative skills are both important features for one's perception of practitioner competence. This research examines how trainees' perceptions of practitioner competence change as they view health care practitioners who vary in their technical and communicative skill proficiencies. Occupational therapy students watched standardized encounters of a practitioner performing a patient transfer in combinations of low and high technical and communicative proficiency and then reported their perceptions of practitioner competence. The reports indicate that technical and communicative skills have independently identifiable impacts on the perceptions of practitioner competency, but technical proficiency has a special impact on the students' perceptions of practitioner communicative competence. The results are discussed with respect to the way in which students may evaluate their own competence on the basis of either technical or communicative skill. The issue of how this may lead trainees to dedicate their independent learning efforts to an incomplete set of features needed for the development of practitioner competency is raised.

The National Shipbuilding Research Program. Proceedings of the REAPS Technical Symposium. Paper No. 20: Application of the GIFTS-5 Minibased Graphics System for Ship Design and Analysis

DTIC Science & Technology

1979-09-01

Proceedings of the REAPS Technical Symposium Paper No. 20: Application of the GIFTS -5 Minibased Graphics System for Ship Design and Analysis U.S...The National Shipbuilding Research Program Proceedings of the REAPS Technical Symposium Paper No. 20: Application of the GIFTS -5 Minibased Graphics...MERCHANTABILITY AND/OR FITNESS FOR PURPOSE ARE SPECIFICALLY DISCLAIMED. APPLICATION OF THE GIFTS -5 MINIBASED GRAPHICS SYSTEM FOR SHIP DESIGN AND ANALYSIS Dr

FY 1999 Scientific and Technical Reports, Articles, Papers, and Presentations

NASA Technical Reports Server (NTRS)

Waits, J.oyce E.Turner

2000-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY99. It also includes papers of MSFC contractors. All of the NASA series reports may be obtained from the NASA Center for AeroSpace Information (CASI), 7121 Standard Drive, Hanover, MD 21076-1320 The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Advanced photoelectric effect experiment beamline at Elettra: A surface science laboratory coupled with Synchrotron Radiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Panaccione, G.; Vobornik, I.; Fujii, J.

2009-04-15

We report the main characteristics of the advanced photoelectric effect experiments beamline, operational at Elettra storage ring, featuring a fully independent double branch scheme obtained by the use of chicane undulators and able to keep polarization control in both linear and circular mode. The paper describes the novel technical solutions adopted, namely, (a) the design of a quasiperiodic undulator resulting in optimized suppression of higher harmonics over a large photon energy range (10-100 eV), (b) the thermal stability of optics under high heat load via cryocoolers, and (c) the end station interconnected setup allowing full access to off-beam and on-beammore » facilities and, at the same time, the integration of users' specialized sample growth chambers or modules.« less

Application of Recommended Design Practices for Conceptual Nuclear Fusion Space Propulsion Systems

NASA Technical Reports Server (NTRS)

Williams, Craig H.

2004-01-01

An AIAA Special Project Report was recently produced by AIAA's Nuclear and Future Flight Propulsion Technical Committee and is currently in peer review. The Report provides recommended design practices for conceptual engineering studies of nuclear fusion space propulsion systems. Discussion and recommendations are made on key topics including design reference missions, degree of technological extrapolation and concomitant risk, thoroughness in calculating mass properties (nominal mass properties, weight-growth contingency and propellant margins, and specific impulse), and thoroughness in calculating power generation and usage (power-flow, power contingencies, specific power). The report represents a general consensus of the nuclear fusion space propulsion system conceptual design community and proposes 15 recommendations. This paper expands on the Report by providing specific examples illustrating how to apply each of the recommendations.

Management of expatriate medical assistance in Mozambique

PubMed Central

Vio, Ferruccio

2006-01-01

This paper discusses how Mozambique coped with the health system needs in terms of specialized doctors since independence, in a troubled context of war, lack of financial resources and modifying settings of foreign aid. The Ministry of Health (MOH) managed to make up for its severe scarcity of specialist MDs especially through contracting expatriate technical assistance. Different scenarios, partnerships and contract schemes that have evolved since independence are briefly described, as well as self-reliance option possibility and implications. Lessons learned about donor initiatives aimed at contracting specialists from other developing countries are singled out. The issue of obtaining expertise and knowledge in the global market as cheap as possible is stressed, and realistic figures of cost planning are highlighted, as determined by the overall health system necessities and budget limitations. PMID:17140454

A Software Safety Risk Taxonomy for Use in Retrospective Safety Cases

NASA Technical Reports Server (NTRS)

Hill, Janice L.

2007-01-01

Safety standards contain technical and process-oriented safely requirements. The best time to include these requirements is early in the development lifecycle of the system. When software safety requirements are levied on a legacy system after the fact, a retrospective safety case will need to be constructed for the software in the system. This can be a difficult task because there may be few to no art facts available to show compliance to the software safely requirements. The risks associated with not meeting safely requirements in a legacy safely-critical computer system must be addressed to give confidence for reuse. This paper introduces a proposal for a software safely risk taxonomy for legacy safely-critical computer systems, by specializing the Software Engineering Institute's 'Software Development Risk Taxonomy' with safely elements and attributes.

Technical Requirements for the Development of Marine Steel in China

NASA Astrophysics Data System (ADS)

Su, Hang; Pan, Tao; Chai, Feng; Yang, Caifu

China now experiences a fast development in shipbuilding and marine steel, the self-developed steel could meet the needs among 95% domestic clients. But in the items of some special high-end products, there are still certain gaps with advanced foreign countries, and these are mainly high-quality and strong-capacity products, large-size products, low-temperature products, and anti-corrosion, anti-fatigue and high-level failure arrest products. In the present paper, some domestic research and development (R& D) results in industry have been introduced, also, it points out that to eliminate these gaps, should rely on both the tech-progress in iron and steel industry, shipbuilding, and marine steel industry, and the establishment and improvement of the R& D system in researching, manufacturing, testing, producing and application.

Developing Mixed Reality Educational Applications: The Virtual Touch Toolkit.

PubMed

Mateu, Juan; Lasala, María José; Alamán, Xavier

2015-08-31

In this paper, we present Virtual Touch, a toolkit that allows the development of educational activities through a mixed reality environment such that, using various tangible elements, the interconnection of a virtual world with the real world is enabled. The main goal of Virtual Touch is to facilitate the installation, configuration and programming of different types of technologies, abstracting the creator of educational applications from the technical details involving the use of tangible interfaces and virtual worlds. Therefore, it is specially designed to enable teachers to themselves create educational activities for their students in a simple way, taking into account that teachers generally lack advanced knowledge in computer programming and electronics. The toolkit has been used to develop various educational applications that have been tested in two secondary education high schools in Spain.

Computational Aeroelastic Analysis of the Semi-Span Super-Sonic Transport (S4T) Wind-Tunnel Model

NASA Technical Reports Server (NTRS)

Sanetrik, Mark D.; Silva, Walter A.; Hur, Jiyoung

2012-01-01

A summary of the computational aeroelastic analysis for the Semi-Span Super-Sonic Transport (S4T) wind-tunnel model is presented. A broad range of analysis techniques, including linear, nonlinear and Reduced Order Models (ROMs) were employed in support of a series of aeroelastic (AE) and aeroservoelastic (ASE) wind-tunnel tests conducted in the Transonic Dynamics Tunnel (TDT) at NASA Langley Research Center. This research was performed in support of the ASE element in the Supersonics Program, part of NASA's Fundamental Aeronautics Program. The analysis concentrated on open-loop flutter predictions, which were in good agreement with experimental results. This paper is one in a series that comprise a special S4T technical session, which summarizes the S4T project.

The place of erotic transference and countertransference in clinical practice.

PubMed

Lijtmaer, Ruth M

2004-01-01

Patients who express intense, erotic attraction to their therapists pose special treatment challenges that may not respond well to the interpretative effects of the therapist. The wish that the therapist demonstrate love for the patient and the therapists' own erotic feelings toward such patients can create misalliances as well difficult technical moments. Furthermore, some patients expressing their love for their therapist may have physiological manifestations while others would not. At the same time, therapists may not experience erotic feelings toward the patients' expressions of love. The purpose of this paper is to try to answer the following questions: How do we conceptualize our patients' erotic manifestations? Are those expressions of Oedipal or preoedipal pathology? What are the countertransference reactions of the analyst? Two clinical examples will highlight these issues.

The Chrysler-Weldtech Approach to Retraining Displaced Workers. A Model Project to Develop Specialized Welding Skills Required for Modern Auto Assembly Operations. Final Technical Report.

ERIC Educational Resources Information Center

Lyons, Thomas M.; Knight, Glen A.

A model project was conducted to demonstrate how Chrysler, in partnership with the education community and the government, could provide technical training to enable displaced workers to contribute to the "H-Body" car launch, to improve their job skills, and to enhance their future employability. The training was conducted on a pilot…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ainsworth, Nathan; Heaps, Colton; Symko-Davies, Martha

The purpose of this report is to propose a technical roadmap for power supply technology to power the Tactical Assault Light Operator Suit (TALOS), an armored, powered exoskeleton currently in development for U.S. Special Operations Command operators. TALOS' power supply system must meet size targets similar to the size of a large backpack while providing significant electrical power for an entire mission cycle without resupply. This report proposes a staged development path based on three fundamental technical approaches.

SeaQuaKE: Sea-optimized Quantum Key Exchange

DTIC Science & Technology

2014-11-01

ONRBAA13-001). In this technical report, we describe modeling results of an entangled photon - pair source based on spontaneous four-wave mixing for...Distribution Special Notice (13-SN- 0004 under ONRBAA13-001). In this technical report, we describe modeling results of an entangled photon - pair ...areas over the last quarter include (i) development of a wavelength-dependent, entangled photon - pair source model and (ii) end-to-end system modeling

Generalized Method for the User Evaluation of Purchased Information Services. Report Number Three; Monthly Report (October 1 to November 30, 1975).

ERIC Educational Resources Information Center

Hall, Homer J.

Four case histories were studied in an on-going project to develop a method for user selection of purchased scientific and technical information services. The issues involved were: (1) the value of computer search services to a small branch of a company technical library; (2) the special decision-making factors used for selecting items of very…

Life as a NATO Engineer

DTIC Science & Technology

2010-08-01

NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND...management; leads military in case of specialized survey; supervises more than 25 local civilian employees ; acts as technical expert during contract...Security Assistance Force Head- quarters Camp. I knew I could handle the job of project manager, but wondered about acting as contract manager, technical ex

[White House Conference on Aging, 1981. Creating an Age Integrated Society: Implications for the Media. Report and Executive Summary of the Technical Committee.

ERIC Educational Resources Information Center

Tanenbaum, Marc H.; And Others

The relationship of older Americans to the new media culture of society is the focus of this Technical Committee Report. The work of two committee-appointed subcommittees on stereotypes and new media technology are explained with a special emphasis on the influence of television. Age stereotyping is examined in prime time television, daytime…

Technical Objective Document. Fiscal Year 1989

DTIC Science & Technology

1987-12-01

other special interest areas/technologies; and throuch a " delphi " process with the Center Technical Investment Committee *develop a "puts and takes...radar and larce optical systems in space, the detection and trackina of low observables, and the operation of sensors for tracking objects in space for...for reducing the processing time for adaptive beamforming in receive arrays, self-coherina techniques in larce distributed arrays and array self

Advances in optimal routing through computer networks

NASA Technical Reports Server (NTRS)

Paz, I. M.

1977-01-01

The optimal routing problem is defined. Progress in solving the problem during the previous decade is reviewed, with special emphasis on technical developments made during the last few years. The relationships between the routing, the throughput, and the switching technology used are discussed and their future trends are reviewed. Economic aspects are also briefly considered. Modern technical approaches for handling the routing problems and, more generally, the flow control problems are reviewed.

Film and television in Croatia today: production, new technologies and the relationship with visual anthropology.

PubMed

Svilicić, Niksa; Vidacković, Zlatko

2013-03-01

This paper seeks to explain some of the most important recent production and technological changes that have affected the relationship between television and film, especially in Croatia, from the aspect of the development of visual anthropology. In the production segment, special attention was given to the role of Croatian television stations in the production of movies, "splitting" the movies into mini-series, interrupting movies with commercial breaks, and to television movies turned into feature films. This paper tries to perceive and define the structure of methodical processes of visual anthropology (reactive process). The development of photographic and film technology and the events which led to the rapid development of visual culture also point to the inseparable duality of observing visual anthropology within reactive and proactive processes, which are indirectly closely related to the technical aspects of these processes. Defining the technical aspect of visual anthropology as such "service" necessarily interferes with the author's approach in the domain of the script and direction related procedures during pre-production, on the field and during post-production of the movie. The author's approach is important because in dependence on it, the desired spectrum of information "output", susceptible to subsequent scientific analysis, is achieved. Lastly, another important segment is the "distributive-technological process" because, regardless of the approach to the anthropologically relevant phenomenon which is being dealt with in an audio-visual piece of work, it is essential that the work be presented and viewed adequately.

Special Populations. A Follow-up of 1987-1988 Suggestions and Recommendations. ICoVE's 1989-1990-1991 Report.

ERIC Educational Resources Information Center

Illinois State Council on Vocational Education, Springfield.

This 3-year follow-up report describes actions taken by the Illinois Council on Vocational Education (ICoVE) during 1989, 1990, and 1991. It addresses the 66 suggestions and 56 recommendations of 9 technical reports (spanning 1987 and 1988) related to special populations. Recommendations from 1987-88 and follow-up actions are reported on the…

Education and Training of Nurse Teachers and Managers with Special Regard to Primary Health Care. Technical Report Series 708.

ERIC Educational Resources Information Center

World Health Organization, Geneva (Switzerland).

A 1983 committee report is presented of the World Health Organization Expert Committee on the Education and Training of Nurse Teachers and Managers with Special Regard to Primary Health Care. After discussing the changing context of health care and trends in primary health care, changes required in education and training in health systems based on…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 33: Special Devices. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on special devices is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Four lessons are included in the…

Military Curricula for Vocational & Technical Education. Basic Electricity and Electronics. CANTRAC A-100-0010. Module 25: Special Devices. Study Booklet.

ERIC Educational Resources Information Center

Chief of Naval Education and Training Support, Pensacola, FL.

This individualized learning module on special devices is one in a series of modules for a course in basic electricity and electronics. The course is one of a number of military-developed curriculum packages selected for adaptation to vocational instructional and curriculum development in a civilian setting. Two lessons are included in the module:…

Porphyrin Tests

MedlinePlus

... variability can occur due to differences in testing equipment, chemical reagents, and techniques. This is a reason ... healthcare practitioner's office? No. Porphyrin tests require specialized equipment and technical skills. Some tests may be performed ...

Improvement of technical purpose materials performance characteristics with the radio frequency low pressure plasma

NASA Astrophysics Data System (ADS)

Makhotkina, L. Yu; Khristoliubova, V. I.

2017-11-01

The main aim of the work is to solve the actual problem of increasing the competitiveness of tanning products by reducing the prime cost and improving the quality of finished products due to the increased durability of the working elements of tanneries. The impact of the low pressure radio frequency (RF) plasma in the processes of treating for modification of the materials for special purposes is considered in the article. The results of working elements of tanneries and the materials for special purposes sample processing by a RF low pressure plasma are described. As a result of leather materials nano structuring and nano modifying physical, mechanical and hygienic characteristics were increased. Processing of the technical purpose materials allows to increase operational performance of products and extend their lifespan.