Sample records for technical procurement bid

  1. 40 CFR 35.4210 - Must my group solicit and document bids for our procurements?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Technical Assistance Procuring A Technical Advisor Or Other Contractor with Tag Funds § 35.4210 Must my group solicit and... the work; (ii) Provide potential sources in the scope of work to be performed and the criteria your...

  2. An analytical Study on Dynamics of Public Procurement System and Bidding-Strategy in Local Contractor's Management

    NASA Astrophysics Data System (ADS)

    Ninomiya, Hitoshi; Nanerikawa, Susumu

    Public procurement system such as Overall-Evaluation dynamically has been changed on local public works in Japan. However some characteristics of Bidding-Strategy and procurement system have not enough clarified. This paper attempt to analysis for a syatem dynamics and mechanisum of Overall-Evaluation by developing new simulation model focused on Bidding-Strategy, to propose some improvement scenario.

  3. Myths, Misconceptions, and Realities about Public Procurement Automation.

    ERIC Educational Resources Information Center

    Bonner, Larry

    1989-01-01

    Meaningful public procurement and inventory management automation encompasses all purchasing and materials management processes, including bidder selection; bidder responsiveness tracking; preparation of bid solicitations; bid tabulation; the tracking of requisitions, bid solicitations, and deliveries; and item purchasing history reports. (MLH)

  4. Cross-national research on contractor evaluation procedures in public works procurement

    NASA Astrophysics Data System (ADS)

    Kinoshita, Seiya; Sato, Naoyoshi; Matsumoto, Naoya

    Contractor evaluation methods in Japan's public works procurement, beginning with construction business licensure, going through biennial preliminary firm rating, up to project-by-project prequalification and comprehensive point rating, were developed during the period when public works were mostly procured through designated competitive bidding. It is essential to focus attention on contractor evaluation methods for introducing different types of procurement procedures which enhance the use of technological capabilities held by private businesses. An overall review of contractor evaluation procedures should be conducted in view of the present situation, where the open competitive bidding has become mainly used in combination with comprehensive evaluation, as well as to allow for further diversification of procurement methods. In Western countries, improvements have been made for the past several years in contractor evaluation procedures with more emphasis on "Value for Money." Advanced efforts made by these countries will be useful as a reference for overhauling Japan's contractor evaluation system. This study conducts a comparative review of contractor evaluation procedures for public procurement in Western countries such as the United States, the United Kingdom and France by identifying similarities and differences between those of Japan and the above mentioned countries. This reveals that a contractor's technical or professional ability is looked at separately from its economic and financial standing in those countries studied, and there is no case like Japan in which those two factors are integrated into one for evaluation.

  5. An Analysis of Bid Evaluation Procedures of Contemporary Models for Procurement in Pakistan

    DTIC Science & Technology

    2016-12-01

    21  E.  COMPONENTS FOR BID EVALUATION .........................................21  1.  Market Intelligence...PROCUREMENT SYSTEM ...............................................23  1.  Basic Principles ...43  1.  Principles of Procurement and Prequalification .......................43  2.  Contract Types

  6. Procurement of construction services: a case study on bidding competition in Singapore public sector contracts

    NASA Astrophysics Data System (ADS)

    Oo, B. L.; Yan, Y.

    2018-04-01

    There are many variables that public clients need to consider in their bidding procedure to enhance efficiency in their procurement for construction services. This paper focusses on the competitive bidding process for public sector procurement of construction services in Singapore. A distinctive feature of the Singapore government competitive bidding process is that full bidding feedback information is released to all competing bidders (and public). The specific objectives are: (i) to examine the degree of competition in the construction markets; and (ii) to examine the bidding performance of competing bidders. Based on a collection of bidding data for a 15-month period, the results show the market environment of the Singapore public sector construction contracting is highly competitive with long bidder lists. In selection of contractors, only 50% of the contracts were awarded to lowest bidders. The results also show that the competing contractors can be broadly classified into three groups based on their bidding performance in terms of number of bidding attempts, bidding success rate and bidding competitiveness. These results provide a useful insight into the bidding competition in the Singapore public sector construction contracting, especially to new market entrants and foreign contractors who want to bid for jobs in Singapore.

  7. Proceedings: 1990 EPRI gas turbine procurement seminar

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McDonald, B.L.; Miller, M.N.

    1991-06-01

    This seminar presents information that enables utilities to implement more cost-effective procurements for gas turbine and combined-cycle power generation equipment. A systematic approach to specification and permitting procedures can lower unit life-cycle cost. APPROACH. Thirty-two staff members from 25 utilities met in Danvers, Massachusetts, October 9--11, 1990. Speakers representing utilities, vendors, and EPRI contractors presented material on recent procurement and startup experiences, permitting considerations, specification strategy, bid evaluation techniques, and a vendor's perspective of utility procurements. KEY POINTS. The seminar focused on specification features, procurement procedures, and bid evaluation techniques designed to implement life-cycle cost-effective procurement consistent with the plantmore » mission. Speakers highlighted the following issues: Experiential case histories of recent procurements and startups, emphasizing how to design procurement procedures that improve plant operating economics; Current trends in permitting for NO{sub x} compliance and recent permitting experience; Quantifiable evaluations of vendors' bids for RAM-related characteristics; The means to obtain specifically desired but nonstandard equipment features.« less

  8. Designing a Successful Bidding Strategy Using Fuzzy Sets and Agent Attitudes

    NASA Astrophysics Data System (ADS)

    Ma, Jun; Goyal, Madhu Lata

    To be successful in a multi-attribute auction, agents must be capable of adapting to continuously changing bidding price. This chapter presents a novel fuzzy attitude-based bidding strategy (FA-Bid), which employs dual assessment technique, i.e., assessment of multiple attributes of the goods as well as assessment of agents' attitude (eagerness) to procure an item in automated auction. The assessment of attributes adapts the fuzzy sets technique to handle uncertainty of the bidding process as well use heuristic rules to determine the attitude of bidding agents in simulated auctions to procure goods. The overall assessment is used to determine a price range based on current bid, which finally selects the best one as the new bid.

  9. Competition in the economic crisis: Analysis of procurement auctions.

    PubMed

    Gugler, Klaus; Weichselbaumer, Michael; Zulehner, Christine

    2015-01-01

    We study the effects of the recent economic crisis on firms׳ bidding behavior and markups in sealed bid auctions. Using data from Austrian construction procurements, we estimate bidders׳ construction costs within a private value auction model. We find that markups of all bids submitted decrease by 1.5 percentage points in the recent economic crisis, markups of winning bids decrease by 3.3 percentage points. We also find that without the government stimulus package this decrease would have been larger. These two pieces of evidence point to pro-cyclical markups.

  10. 48 CFR 9904.420 - Accounting for independent research and development costs and bid and proposal costs.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS COST ACCOUNTING STANDARDS 9904.420 Accounting for independent research and development costs and bid and proposal costs. ...

  11. 14 CFR Appendix C to Part 152 - Procurement Procedures and Requirements

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... The sponsor shall establish procedures for procurement of supplies, equipment, construction, and... other State, possession, or territory of the United States in the construction of a project. 3. Bid guarantee. All bids for construction or facility improvement in excess of $100,000 shall be accompanied by a...

  12. 14 CFR Appendix C to Part 152 - Procurement Procedures and Requirements

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    .... The sponsor shall establish procedures for procurement of supplies, equipment, construction, and... other State, possession, or territory of the United States in the construction of a project. 3. Bid guarantee. All bids for construction or facility improvement in excess of $100,000 shall be accompanied by a...

  13. 14 CFR Appendix C to Part 152 - Procurement Procedures and Requirements

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    .... The sponsor shall establish procedures for procurement of supplies, equipment, construction, and... other State, possession, or territory of the United States in the construction of a project. 3. Bid guarantee. All bids for construction or facility improvement in excess of $100,000 shall be accompanied by a...

  14. 14 CFR Appendix C to Part 152 - Procurement Procedures and Requirements

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    .... The sponsor shall establish procedures for procurement of supplies, equipment, construction, and... other State, possession, or territory of the United States in the construction of a project. 3. Bid guarantee. All bids for construction or facility improvement in excess of $100,000 shall be accompanied by a...

  15. 14 CFR Appendix C to Part 152 - Procurement Procedures and Requirements

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... The sponsor shall establish procedures for procurement of supplies, equipment, construction, and... other State, possession, or territory of the United States in the construction of a project. 3. Bid guarantee. All bids for construction or facility improvement in excess of $100,000 shall be accompanied by a...

  16. Procurement and Contracting, Transportation & Public Facilities, State of

    Science.gov Websites

    Calendar Bid Opening Results Contract Award Status AASHTOWare Project Vendor List Contractor Bidding List Contractor Bidding Information Requests for Proposals Professional Services Request for Proposals

  17. NDI Acquisition. An Alternative to Business as Usual. Report of the DSMC 1991-1992 Military Research Fellows

    DTIC Science & Technology

    1992-10-01

    sealed bidding and competitive proposals. governed by the same regulations and laws The sealed bidding procedure requires ade- that govern procurement ...Summary xiv NDI ACQUISITION: An Alternative to "Business as Usual" to successful, effective government procure - posal Cover Sheet). Moreover, the...became policy when the OPlP ;,;sued the first opment costs. These benefits may be offset by in a series of memoranda governing procure - performance

  18. Marginal Bidding: An Application of the Equimarginal Principle to Bidding in TAC SCM

    NASA Astrophysics Data System (ADS)

    Greenwald, Amy; Naroditskiy, Victor; Odean, Tyler; Ramirez, Mauricio; Sodomka, Eric; Zimmerman, Joe; Cutler, Clark

    We present a fast and effective bidding strategy for the Trading Agent Competition in Supply Chain Management (TAC SCM). In TAC SCM, manufacturers compete to procure computer parts from suppliers (the procurement problem), and then sell assembled computers to customers in reverse auctions (the bidding problem). This paper is concerned only with bidding, in which an agent must decide how many computers to sell and at what prices to sell them. We propose a greedy solution, Marginal Bidding, inspired by the Equimarginal Principle, which states that revenue is maximized among possible uses of a resource when the return on the last unit of the resource is the same across all areas of use. We show experimentally that certain variations of Marginal Bidding can compute bids faster than our ILP solution, which enables Marginal Bidders to consider future demand as well as current demand, and hence achieve greater revenues when knowledge of the future is valuable.

  19. 7 CFR 1780.72 - Procurement methods.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 12 2012-01-01 2012-01-01 false Procurement methods. 1780.72 Section 1780.72..., Constructing and Inspections § 1780.72 Procurement methods. Procurement shall be made by one of the following methods: Small purchase procedures; competitive sealed bids (formal advertising); competitive negotiation...

  20. 7 CFR 1780.72 - Procurement methods.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 12 2013-01-01 2013-01-01 false Procurement methods. 1780.72 Section 1780.72..., Constructing and Inspections § 1780.72 Procurement methods. Procurement shall be made by one of the following methods: Small purchase procedures; competitive sealed bids (formal advertising); competitive negotiation...

  1. 7 CFR 1780.72 - Procurement methods.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 12 2014-01-01 2013-01-01 true Procurement methods. 1780.72 Section 1780.72..., Constructing and Inspections § 1780.72 Procurement methods. Procurement shall be made by one of the following methods: Small purchase procedures; competitive sealed bids (formal advertising); competitive negotiation...

  2. 7 CFR 1780.72 - Procurement methods.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Procurement methods. 1780.72 Section 1780.72..., Constructing and Inspections § 1780.72 Procurement methods. Procurement shall be made by one of the following methods: Small purchase procedures; competitive sealed bids (formal advertising); competitive negotiation...

  3. 7 CFR 1780.72 - Procurement methods.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 12 2011-01-01 2011-01-01 false Procurement methods. 1780.72 Section 1780.72..., Constructing and Inspections § 1780.72 Procurement methods. Procurement shall be made by one of the following methods: Small purchase procedures; competitive sealed bids (formal advertising); competitive negotiation...

  4. 7 CFR 1726.201 - Formal competitive bidding.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGRICULTURE ELECTRIC SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Procurement Procedures § 1726.201 Formal... formal competitive bidding: (a) Selection of qualified bidders. The borrower (acting through its engineer... § 1726.23). (b) Invitations to bid. The borrower (acting through its engineer, if applicable) is...

  5. 7 CFR 1726.201 - Formal competitive bidding.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... AGRICULTURE ELECTRIC SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Procurement Procedures § 1726.201 Formal... formal competitive bidding: (a) Selection of qualified bidders. The borrower (acting through its engineer... § 1726.23). (b) Invitations to bid. The borrower (acting through its engineer, if applicable) is...

  6. 7 CFR 1726.201 - Formal competitive bidding.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... AGRICULTURE ELECTRIC SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Procurement Procedures § 1726.201 Formal... formal competitive bidding: (a) Selection of qualified bidders. The borrower (acting through its engineer... § 1726.23). (b) Invitations to bid. The borrower (acting through its engineer, if applicable) is...

  7. 7 CFR 1726.201 - Formal competitive bidding.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... AGRICULTURE ELECTRIC SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Procurement Procedures § 1726.201 Formal... formal competitive bidding: (a) Selection of qualified bidders. The borrower (acting through its engineer... § 1726.23). (b) Invitations to bid. The borrower (acting through its engineer, if applicable) is...

  8. 7 CFR 1726.201 - Formal competitive bidding.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... AGRICULTURE ELECTRIC SYSTEM CONSTRUCTION POLICIES AND PROCEDURES Procurement Procedures § 1726.201 Formal... formal competitive bidding: (a) Selection of qualified bidders. The borrower (acting through its engineer... § 1726.23). (b) Invitations to bid. The borrower (acting through its engineer, if applicable) is...

  9. Bidding: Getting the Best Price for School Foodservice.

    ERIC Educational Resources Information Center

    DiBella, Cecilia M.

    1998-01-01

    Sharon (Massachusetts) Public Schools developed an alternative procurement process for school food services that complies with state public bidding laws while evading "low-bid" constraints. The new process features evaluative criteria covering nutrition education, community outreach, management expertise, site visits, and price…

  10. 13 CFR 305.6 - Allowable methods of procurement for construction services.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Approved Projects § 305.6 Allowable methods of procurement for construction services. (a) Recipients may use alternate construction procurement methods to the traditional design/bid/build procedures... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Allowable methods of procurement...

  11. 7 CFR 3565.257 - Procurement actions.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 15 2011-01-01 2011-01-01 false Procurement actions. 3565.257 Section 3565.257... AGRICULTURE GUARANTEED RURAL RENTAL HOUSING PROGRAM Property Requirements § 3565.257 Procurement actions. All construction procurement actions, whether by sealed bid or by negotiation, must be conducted in a manner that...

  12. 7 CFR 3565.257 - Procurement actions.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Procurement actions. 3565.257 Section 3565.257... AGRICULTURE GUARANTEED RURAL RENTAL HOUSING PROGRAM Property Requirements § 3565.257 Procurement actions. All construction procurement actions, whether by sealed bid or by negotiation, must be conducted in a manner that...

  13. 7 CFR 1753.48 - Procurement procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...' qualifications for all types of construction and for the required information on the bidder and subcontractors... qualified to submit bids, RUS written approval must be obtained to proceed with requesting bids. (4) Bid...) Materials on hand to be furnished by the borrower shall be released to the contractor at the start of...

  14. Competitive negotiation: the Virginia SCC's model for procurement of generating capacity

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    The Virginia SCC, in approving competitive alternatives to avoided costs under PURPA, rejected competitive bidding in favor of competitive negotiation for power sales contracts. The difference is important, and points in the direction of increased discretion for utilities seeking new generating capacity from independents. The distinction between competitive bidding, and competitive negotiation, in a nutshell, is that in a bid, the low price bidder wins. In a negotiation, the offeror of the most-meritorious proposals are ranked, and an attempt to reach agreement on price is made with the high-ranked offeror. Only if there is no agreement on price will themore » most-meritorious bid be rejected, and negotiations with the offeror of the next best proposal begun. The Virginia Public Procurement Act, Sec. II-37, Definitions, Parts 1, 2, and 3.a. is included.« less

  15. 40 CFR 30.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... competition when competitive bids or offers are not obtained; and basis for award cost or price. ..., HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Procurement Standards § 30.46...

  16. 14 CFR 1260.146 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Higher Education, Hospitals, and Other Non-Profit Organizations Procurement Standards § 1260.146... of competition when competitive bids or offers are not obtained, and (c) Basis for award cost or price. ...

  17. 7 CFR 3019.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ...) Justification for lack of competition bids or offers are not obtained, and (c) Basis for award cost or price. ... HIGHER EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Procurement...

  18. 7 CFR 277.14 - Procurement standards.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... must fulfill and all other factors to be used in evaluating bids or proposals. (2) State agencies shall... simple and informal procurement methods that are sound and appropriate for a procurement of services... negotiation, proposals are requested from a number of sources and the Request for Proposal is publicized...

  19. 36 CFR 1210.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Procurement Standards...) Justification for lack of competition when competitive bids or offers are not obtained, and (c) Basis for award cost or price. ...

  20. 2 CFR 215.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... NON-PROFIT ORGANIZATIONS (OMB CIRCULAR A-110) Post Award Requirements Procurement Standards § 215.46... of competition when competitive bids or offers are not obtained; and (c) Basis for award cost or price. ...

  1. 22 CFR 145.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Procurement Standards § 145... for lack of competition when competitive bids or offers are not obtained, and (c) basis for award cost or price. ...

  2. 24 CFR 84.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Procurement Standards § 84... for lack of competition when competitive bids or offers are not obtained; and (c) Basis for award cost or price. ...

  3. 32 CFR 32.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Procurement Standards § 32.46... for lack of competition when competitive bids or offers are not obtained; and (c) Basis for award cost or price. ...

  4. 41 CFR 105-72.506 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS 72.50-Post-Award Requirements/Procurement Standards...) Justification for lack of competition when competitive bids or offers are not obtained, and (c) Basis for award cost or price. ...

  5. 38 CFR 49.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Procurement Standards § 49.46... of competition when competitive bids or offers are not obtained, and (c) Basis for award cost or price. (Authority: Pub. L. 104-156; 110 Stat. 1396) ...

  6. 24 CFR 135.11 - Other laws governing training, employment, and contracting.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... preference in the evaluation of bids or proposals. (2) Flexible Subsidy Program. Multifamily project... practices it selects provide preference to section 3 business concerns. (b) Procurement standards for other... statute that expressly encourages a geographic preference in the evaluation of bids or proposals. (c...

  7. 75 FR 54560 - Federal Acquisition Regulation; Clarification of Standard Form 26-Award/Contract

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-08

    ... changes will not prohibit the use of the SF 26 for awarding negotiated procurements; it will only prohibit... Budget under 44 U.S.C. chapter 35, et seq. List of Subjects in 48 CFR Part 53 Government procurement... be used when awarding a negotiated procurement and should only be checked when awarding a sealed-bid...

  8. 14 CFR 1274.507 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Procurement records. 1274.507 Section 1274.507 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION COOPERATIVE AGREEMENTS WITH...) Basis for contractor selection. (b) Justification for lack of competition when competitive bids or...

  9. 40 CFR 35.939 - Protests.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... complainant, the grantee's procurement action (for example, contract award) must be taken in accordance with...) of this section should be made as early as possible during the procurement process (for example... grantee proposes to award a formally advertised, competitively bid, fixed price contract to a party who...

  10. 7 CFR 226.22 - Procurement standards.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... which offerors must fulfill and all other factors to be used in evaluating bids or proposals. (2) Awards... purchase procedures are those relatively simple and informal procurement methods that are sound and... documented business reasons in the best interest of the Program. (3) In competitive negotiation, proposals...

  11. 7 CFR 226.22 - Procurement standards.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... which offerors must fulfill and all other factors to be used in evaluating bids or proposals. (2) Awards... purchase procedures are those relatively simple and informal procurement methods that are sound and... documented business reasons in the best interest of the Program. (3) In competitive negotiation, proposals...

  12. A case study : the Las Vegas Freeway and Arterial Management System : use of a systems manager contractor to procure ITS

    DOT National Transportation Integrated Search

    2000-03-01

    Procurement of Intelligent Transportation System (ITS) projects using Federal-aid funds can present challenges that are not typically observed in traditional transportation projects. Many roadway improvement projects involve the two-step "Design-Bid-...

  13. 75 FR 13415 - Federal Acquisition Regulation; FAR Case 2008-040, Use of Standard Form 26 - Award/Contract

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-19

    ... at FAR 53.215-1(a) to read ``Block 18 may not be used for negotiated procurements.'' This change does... U.S.C. chapter 35, et seq. List of Subjects in 48 CFR Parts 15 and 53 Government procurement. [[Page... negotiated procurement and emphasize that block 18 should only be checked when awarding a sealed bid contract...

  14. 24 CFR 1000.52 - What Indian preference requirements apply to IHBG procurement?

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... requirements of this section); or (2) Advertise for bids or proposals limited to qualified Indian organizations... responses are received from more than one Indian enterprise found to be qualified, advertise for bids or... reasonable cost, then the recipient shall: (1) Re-advertise the contract, using any of the methods described...

  15. 7 CFR 226.21 - Food service management companies.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... procurements of meals from food service management companies shall adhere to the procurement standards set... provisions set forth in § 226.22, the State agency may mandate that each institution with Program meal... shall include the time and place of the bid opening; (2) The institution shall notify the State agency...

  16. 48 CFR 1403.104-4 - Disclosure, protection, and marking of contractor bid or proposal information and source...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... a particular procurement: (1) Individuals who generate contract requirements, including program and... the contracting activity directly involved in the procurement; (4) Supervisors in the CO's chain of... ethics official and servicing Ethics Counselors; (17) Members of Congress and members of their staff...

  17. Service Delivery to the Handicapped: The Role of the Federal Procurement Process. Part II. Selecting Contractors by Competitive Award.

    ERIC Educational Resources Information Center

    Donaldosn, William S.; Stephens, Thomas M.

    1979-01-01

    Sections address the RFP/IFB (Request for Proposals/Invitation for Bids) process and procedures for selecting the "best" contract. In reviewing the federal procurement code, and the recent decision of the Government Accounting Office, particularly regarding the NIMIS (National Instructional Materials Information System contract), inconsistencies…

  18. Cost containment through pharmaceutical procurement: a Caribbean case study.

    PubMed

    Huff-Rousselle, M; Burnett, F

    1996-01-01

    This article discusses the potential for health sector cost containment in developing countries through improved pharmaceutical procurement. By describing the specific example of the Eastern Caribbean Drug Service (ECDS), which provides a pooled procurement service to nine ministries of health in the small island nations of the Caribbean, it examines the elements of the procurement operation that allowed ECDS to reduce unit costs for pharmaceuticals by over 50 per cent during its first procurement cycle. The analysis of ECDS considers: (1) political will, institutional alliances, and the creation of a public sector monopsony; (2) pooling demand; (3) restricted international tendering and the pharmaceutical industry; (4) estimating demand and supplier guarantees; (5) reducing variety and increasing volume through standardizing pack sizes, dosage forms and strengths; (6) generic bidding and therapeutic alternative bidding; (7) mode of transport from foreign suppliers; (8) financing mechanisms, including choice of currency, foreign exchange, and terms of payment; (9) market conditions and crafting and enforcing supplier contracts; and, (10) the adjudication process, including consideration of suppliers' past performance, precision requirements in the manufacturing process, number of products awarded to suppliers, and issues of judgment. The authors consider the relevance of this agency's experience to other developing countries by providing a blueprint that can be adopted or modified to suit other situations.

  19. Transformation of fraud activities in procurement system in Indonesia

    NASA Astrophysics Data System (ADS)

    Setiani, N.; Huda, S. N.; Pulungan, R.; Winarko, E.

    2017-03-01

    E-procurement has been applied in Indonesia since 2008 through the adoption of Electronic Procurement System (SPSE). The purpose of the use of SPSE in the procurement process is to improve the efficiency of goods or services procurement. In the bidding process, intensive communication and data exchange between providers and organizers are urgently needed. Through SPSE, the frequency of face to face meetings between providers and the committee can be reduced. This is expected to minimize potential fraud behaviors in the goods or services procurement conducted through the tender process. There exists a transformation of activities in the procurement through SPSE from the tender process that was previously done manually. In this paper, we analyze this transformation between manual procurement process and SPSE-based procurement process. The result of the analysis is exploited for investigating the possibility of fraud behavior transformations in every phase of e-procurement activities.

  20. The Political Economy of the Munitions Supply Program

    DTIC Science & Technology

    2014-05-01

    franchisees bid their true costs.47 Third, once supply is forthcoming, the franchisee has an incentive to minimize costs unless the franchiser is known... franchisee skimps on quality. In this regard, the franchiser has an incentive to preserve its “smart customer” capabilities, particularly if bids...term procurement program that sustains a domestic munitions industrial base that consists of a group of government- franchised mo- nopolies contracted

  1. 15 CFR 14.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... competition when competitive bids or offers are not obtained; and (c) Basis for award cost or price. ... FOR GRANTS AND AGREEMENTS WITH INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, OTHER NON-PROFIT, AND...

  2. Armed Services Pricing Manual (ASPM)

    DTIC Science & Technology

    1986-01-01

    NOTES 14. ABSTRACT 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT Same as Report (SAR) 18. NUMBER OF PAGES 361...f. National security . g. Public interest. Two kinds of solicitations are equally acceptable: invitations for bids Fl3s), for sealed bidding, and...2.12 2-14 2-14 2-15 2-15 The objective of procurement is to secure needed supplies and services fr( nsi b I e at fair and reasonable prices calculated

  3. 7 CFR 1942.126 - Planning, bidding, contracting, constructing, procuring.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... evaluate the proposals received or can obtain adequate assistance from other sources, such as State or.... Contract documents must be sufficiently descriptive and legally binding to accomplish the work as...

  4. 7 CFR 1942.126 - Planning, bidding, contracting, constructing, procuring.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... evaluate the proposals received or can obtain adequate assistance from other sources, such as State or.... Contract documents must be sufficiently descriptive and legally binding to accomplish the work as...

  5. 7 CFR 1942.126 - Planning, bidding, contracting, constructing, procuring.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... evaluate the proposals received or can obtain adequate assistance from other sources, such as State or.... Contract documents must be sufficiently descriptive and legally binding to accomplish the work as...

  6. 7 CFR 1942.126 - Planning, bidding, contracting, constructing, procuring.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... evaluate the proposals received or can obtain adequate assistance from other sources, such as State or.... Contract documents must be sufficiently descriptive and legally binding to accomplish the work as...

  7. 7 CFR 1942.126 - Planning, bidding, contracting, constructing, procuring.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... evaluate the proposals received or can obtain adequate assistance from other sources, such as State or.... Contract documents must be sufficiently descriptive and legally binding to accomplish the work as...

  8. 43 CFR 12.946 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... With Institutions of Higher Education, Hospitals, and Other Non-Profit Organizations Post-Award...) Justification for lack of competition when competitive bids or offers are not obtained; and (c) Basis for award cost or price. ...

  9. 7 CFR 550.48 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... AGRICULTURE GENERAL ADMINISTRATIVE POLICY FOR NON-ASSISTANCE COOPERATIVE AGREEMENTS Management of Agreements... selection; (b) Justification for lack of competition when competitive bids or offers are not obtained; and (c) Basis for award cost or price. ...

  10. 76 FR 21743 - General Services Administration Acquisition Regulation; Information Collection; Sealed Bidding

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-18

    ... comments on or before: June 17, 2011. FOR FURTHER INFORMATION CONTACT: Michael O. Jackson, Procurement Analyst, Contract Policy Branch, at telephone (202) 208-4949 or michaelo.jackson@gsa.gov . ADDRESSES...

  11. 22 CFR 518.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... AGREEMENTS WITH INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award... selection, (b) Justification for lack of competition when competitive bids or offers are not obtained, and (c) Basis for award cost or price. ...

  12. 49 CFR 19.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... AGREEMENTS WITH INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award... selection, (b) Justification for lack of competition when competitive bids or offers are not obtained, and (c) Basis for award cost or price. ...

  13. 13 CFR 126.613 - How does a price evaluation preference affect the bid of a qualified HUBZone SBC in full and open...

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... evaluation preference is not applied to change an offer and benefit a non-HUBZone SBC. Example 3: In a full... be awarded that is not greater than 25% of the total volume being procured for each commodity in a... than 25%, but not greater than 40%, of the total volume being procured for each commodity in a single...

  14. 13 CFR 121.1004 - What time limits apply to size protests?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., Sundays, and legal holidays, after bid or proposal opening. (2) Negotiated procurement. A protest must be... paragraph (e), for purposes of the SBIR program the contracting officer and SBA may file a protest in...

  15. 13 CFR 121.1004 - What time limits apply to size protests?

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., Sundays, and legal holidays, after bid or proposal opening. (2) Negotiated procurement. A protest must be... paragraph (e), for purposes of the SBIR program the contracting officer and SBA may file a protest in...

  16. 13 CFR 121.1004 - What time limits apply to size protests?

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ..., Sundays, and legal holidays, after bid or proposal opening. (2) Negotiated procurement. A protest must be... paragraph (e), for purposes of the SBIR program the contracting officer and SBA may file a protest in...

  17. 76 FR 46808 - General Services Administration Acquisition Regulation; Submission for OMB Review; Sealed Bidding

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-03

    ... comments on or before: September 2, 2011. FOR FURTHER INFORMATION CONTACT: Michael O. Jackson, Procurement Analyst, Contract Policy Branch, at telephone (202) 208-4949 or michaelo.jackson@gsa.gov . ADDRESSES...

  18. Analysis of Criteria Influencing Contractor Selection Using TOPSIS Method

    NASA Astrophysics Data System (ADS)

    Alptekin, Orkun; Alptekin, Nesrin

    2017-10-01

    Selection of the most suitable contractor is an important process in public construction projects. This process is a major decision which may influence the progress and success of a construction project. Improper selection of contractors may lead to problems such as bad quality of work and delay in project duration. Especially in the construction projects of public buildings, the proper choice of contractor is beneficial to the public institution. Public procurement processes have different characteristics in respect to dissimilarities in political, social and economic features of every country. In Turkey, Turkish Public Procurement Law PPL 4734 is the main regulatory law for the procurement of the public buildings. According to the PPL 4734, public construction administrators have to contract with the lowest bidder who has the minimum requirements according to the criteria in prequalification process. Public administrators are not sufficient for selection of the proper contractor because of the restrictive provisions of the PPL 4734. The lowest bid method does not enable public construction administrators to select the most qualified contractor and they have realised the fact that the selection of a contractor based on lowest bid alone is inadequate and may lead to the failure of the project in terms of time delay Eand poor quality standards. In order to evaluate the overall efficiency of a project, it is necessary to identify selection criteria. This study aims to focus on identify importance of other criteria besides lowest bid criterion in contractor selection process of PPL 4734. In this study, a survey was conducted to staff of Department of Construction Works of Eskisehir Osmangazi University. According to TOPSIS (Technique for Order Preference by Similarity to the Ideal Solution) for analysis results, termination of construction work in previous tenders is the most important criterion of 12 determined criteria. The lowest bid criterion is ranked in rank 5.

  19. Contracting Officer Workload and Contractual Terms: Theory and Evidence

    DTIC Science & Technology

    2012-08-30

    should be conducted in accordance with simplified acquisitions procedures and are explicitly set aside for small businesses . These awards are known as...analyze a set of California Highway Procurement auctions and find that the ex-post adaptation costs make up between 7 and 13% of the winning bid...and simply assume he is facing some set of incentives that leads him to value saving time and money on the project and on its procurement . Having him

  20. Pavement marking demonstration projects : state of Alaska and state of Tennessee.

    DOT National Transportation Integrated Search

    2013-11-01

    This project evaluates the safety impacts, environmental impacts, and cost effectiveness of different pavement marking : systems as well as the effect of State bidding and procurement processes on the quality of pavement marking material : employed i...

  1. 45 CFR 2543.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... SERVICE GRANTS AND AGREEMENTS WITH INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, AND OTHER NON-PROFIT...: (a) Basis for contractor selection; (b) Justification for lack of competition when competitive bids or offers are not obtained; and (c) Basis for award cost or price. ...

  2. Nutrition Quality of US School Snack Foods: A First Look at 2011-2014 Bid Records in 8 School Districts.

    PubMed

    Wang, Y Claire; Hsiao, Amber; Chamberlin, Peter; Largay, McKenzie; Archibald, Abbie; Malone, Andrew; Stevelos, JoAnn

    2017-01-01

    As part of the Healthy, Hunger-Free Kids Act, snacks, and desserts sold in K-12 schools as of the 2014-2015 school year are required to meet the "Smart Snacks" nutritional guidelines. Although studies exist in tracking progress in local and national efforts, the proportion of snack food procured by school districts compliant with the Smart Snacks standard prior to its full implementation is unknown. We repurposed a previously untapped database, Interflex, of public bid records to examine the nutritional quality of snacks and desserts procured by school districts. We selected 8 school districts with at least 90% complete data each year during 2011-2012, 2012-2013, and 2013-2014 school years and at locations across different regions of the United States. We quantified the amount of calories and sugar of each product contained in the won bids based on available online sources and determined whether the produce complied with Smart Snack guidelines. In all 8 districts (snack expenditure analyzed ranging from $152,000 to $4.4 million), at least 50% of snack bids were compliant with the US Department of Agriculture Smart Snacks standard during the 2013-2014 school year. Across sampled districts, we observed a general trend in lower caloric density (kcal per product) and sugar density (grams of sugar per product) over a 3-year period. Many districts across the country have made headway in complying with the Smart Snack guidelines, though gaps remain. © 2016, American School Health Association.

  3. Research on power market technical analysis index system employing high-low matching mechanism

    NASA Astrophysics Data System (ADS)

    Li, Tao; Wang, Shengyu

    2018-06-01

    The power market trading technical analysis refers to a method that takes the bidding behavior of members in the power market as the research object, sums up some typical market rules and price trends by applying mathematical and logical methods, and finally can effectively assist members in the power market to make more reasonable trading decisions. In this paper, the following four indicators have been proposed: bidding price difference scale, extreme bidding price rate, dispersion of bidding price and monthly transaction satisfaction of electricity trading, which are the core of the index system.

  4. 42 CFR 495.348 - Procurement standards.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... specifications, requirements, statements of work, invitations for bids and requests for proposals must be... small businesses, minority-owned firms, and women's business enterprises, whenever possible. Grantees of..., minority-owned firms, and women's business enterprises are used to the fullest extent practicable. (ii...

  5. Study Of The Feasibility And Design Configuration For In-Vehicle Route Guidance, Volume II: Final Report

    DOT National Transportation Integrated Search

    2000-03-01

    Procurement of Intelligent Transportation System (ITS) projects using Federal-aid funds can present challenges that are not typically observed in traditional transportation projects. Many roadway improvement projects involve the two-step "Design-Bid-...

  6. Study on Comparison of Bidding and Pricing Behavior Distinction between Estimate Methods

    NASA Astrophysics Data System (ADS)

    Morimoto, Emi; Namerikawa, Susumu

    The most characteristic trend on bidding and pricing behavior distinction in recent years is the increasing number of bidders just above the criteria for low-price bidding investigations. The contractor's markup is the difference between the bidding price and the execution price. Therefore, the contractor's markup is the difference between criteria for low-price bidding investigations price and the execution price in the public works bid in Japan. Virtually, bidder's strategies and behavior have been controlled by public engineer's budgets. Estimation and bid are inseparably linked in the Japanese public works procurement system. The trial of the unit price-type estimation method begins in 2004. On another front, accumulated estimation method is one of the general methods in public works. So, there are two types of standard estimation methods in Japan. In this study, we did a statistical analysis on the bid information of civil engineering works for the Ministry of Land, Infrastructure, and Transportation in 2008. It presents several issues that bidding and pricing behavior is related to an estimation method (several estimation methods) for public works bid in Japan. The two types of standard estimation methods produce different results that number of bidders (decide on bid-no bid strategy) and distribution of bid price (decide on mark-up strategy).The comparison on the distribution of bid prices showed that the percentage of the bid concentrated on the criteria for low-price bidding investigations have had a tendency to get higher in the large-sized public works by the unit price-type estimation method, comparing with the accumulated estimation method. On one hand, the number of bidders who bids for public works estimated unit-price tends to increase significantly Public works estimated unit-price is likely to have been one of the factors for the construction companies to decide if they participate in the biddings.

  7. 40 CFR 35.4205 - How does my group procure a technical advisor or any other contractor?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false How does my group procure a technical... PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Technical Assistance Procuring A Technical Advisor Or Other Contractor with Tag Funds § 35.4205 How does my group...

  8. 28 CFR 70.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... AND AGREEMENTS (INCLUDING SUBAWARDS) WITH INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS AND OTHER NON... following at a minimum: (a) Basis for contractor selection, (b) Justification for lack of competition when competitive bids or offers are not obtained, and (c) Basis for award cost or price. ...

  9. 34 CFR 74.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements... selection; (b) Justification for lack of competition when competitive bids or offers are not obtained; (c) Basis for award cost or price. (Approved by the Office of Management and Budget under control number...

  10. 40 CFR 35.939 - Protests.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (generally, for formally advertised procurement, after bid opening, within 1 week after the basis for the...'s written or other formal notice is first received. (2) A protest appeal authorized by paragraph (e... constitute final agency action, from which there shall be no further administrative appeal. The Regional...

  11. Pooling procurement in the Belgian hospital sector.

    PubMed

    Hebert, Guy

    2011-01-01

    The Belgian hospital sector is following the example of a number of other European countries and for more than ten years now, has been striving to pool its medical supplies and equipment purchases in a bid to reduce costs. The various experiments of which we are aware come under both opportunist purchases and initiatives which are designed to encourage local-regional contracts. These attempts have now all come to nothing or are struggling in the absence of a structured and professional approach. In 2005, the Saint Luc University Clinic in Brussels decided to set up a high-performance purchasing department, the aim being to centre its initiatives around TCO or Total Cost of Ownership. Following an analysis of the various experiments into pooling procurement in hospitals in Europe, the Saint Luc University Clinic decided on a central procurement agency model, in accordance with new legislation on public procurement. This article seeks to highlight the prerequisites which are vital for a procurement pooling initiative, without underestimating the risks and limitations of implementing such a change in procurement practices. The Mercure central procurement agency is now the largest interhospital purchasing structure in Belgium.

  12. STP 4-06 Model-Based Technical Data in Procurement, 3D PDF Technology Data Demonstration Project. Phase 1 Summary

    DTIC Science & Technology

    2015-07-01

    O R G STP 4-06 MODEL-BASED TECHNICAL DATA IN PROCUREMENT 3D PDF TECHNOLOGY DATA DEMONSTRATION PROJECT PHASE 1 SUMMARY REPORT DL309T2...LMI’s ISO- certified quality management procedures. J U L Y 2 0 1 5 STP 4-06 MODEL-BASED TECHNICAL DATA IN PROCUREMENT 3D PDF TECHNICAL DATA...Based Technical Data ..................................................................................... 5 3D PDF Demonstration Team

  13. An Analysis of the General Services Administration Board of Contract Appeals Bid Protest Decisions and the Effect on Automated Data Processing Equipment/Federal Information Processing Resources Procurements

    DTIC Science & Technology

    1991-12-01

    associated with ADP/FIP protests. Navy and Marine Corps contracting agencies w\\ere contacted to determine their current experience in ADP/’FIP contracting...an emphasis on the GSBCA. A protestor has many options in vhich to "avenge" their wrong. A Contracting Officer can therefore expect a variety of...subject to their exclusive procurement authority. The term ADPE and ADP/FIP will be used somewhat loosely. In most cases, the acronyms include

  14. 40 CFR 35.936-18 - Negotiation of subagreements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 1 2013-07-01 2013-07-01 false Negotiation of subagreements. 35.936-18... Negotiation of subagreements. (a) Formal advertising, with adequate purchase descriptions, sealed bids, and public openings shall be the required method of procurement unless negotiation under paragraph (b) of...

  15. 40 CFR 35.936-18 - Negotiation of subagreements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 1 2012-07-01 2012-07-01 false Negotiation of subagreements. 35.936-18... Negotiation of subagreements. (a) Formal advertising, with adequate purchase descriptions, sealed bids, and public openings shall be the required method of procurement unless negotiation under paragraph (b) of...

  16. 40 CFR 35.936-18 - Negotiation of subagreements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 1 2014-07-01 2014-07-01 false Negotiation of subagreements. 35.936-18... Negotiation of subagreements. (a) Formal advertising, with adequate purchase descriptions, sealed bids, and public openings shall be the required method of procurement unless negotiation under paragraph (b) of...

  17. Supply Chain Management: Are You Maximizing Your Procurement Activity?

    ERIC Educational Resources Information Center

    Dobbin, James; Jenkins, Mike

    2000-01-01

    Today's purchasing professionals recognize the need to reduce non-value-added procedures (clerical functions) while emphasizing strategic planning. Results-oriented supply-chain managers need superb communication, negotiation, and leadership skills to achieve long-term value and resist the lowest, first- cost bids. (Contains 13 references.) (MLH)

  18. JOC Be Nimble, JOC Be Quick

    ERIC Educational Resources Information Center

    Schreyer, Paul R.

    2012-01-01

    Given our aging and crowded schools, today's administrators have to focus their attention on modernizing facilities. The Job Order Contracting (JOC) procurement method allows school administrators to complete a large number of high quality maintenance projects quickly with a single, competitively bid contract. The JOC process fits schools' unique…

  19. 40 CFR 35.936-18 - Negotiation of subagree-ments.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Negotiation of subagree-ments. 35.936... § 35.936-18 Negotiation of subagree-ments. (a) Formal advertising, with adequate purchase descriptions, sealed bids, and public openings shall be the required method of procurement unless negotiation under...

  20. 40 CFR 35.936-18 - Negotiation of subagree-ments.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Negotiation of subagree-ments. 35.936... § 35.936-18 Negotiation of subagree-ments. (a) Formal advertising, with adequate purchase descriptions, sealed bids, and public openings shall be the required method of procurement unless negotiation under...

  1. 48 CFR 3.104-1 - Definitions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... BUSINESS PRACTICES AND PERSONAL CONFLICTS OF INTEREST Safeguards 3.104-1 Definitions. As used in this... proposal information means any of the following information submitted to a Federal agency as part of or in connection with a bid or proposal to enter into a Federal agency procurement contract, if that information...

  2. 48 CFR 3.104-1 - Definitions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... BUSINESS PRACTICES AND PERSONAL CONFLICTS OF INTEREST Safeguards 3.104-1 Definitions. As used in this... proposal information means any of the following information submitted to a Federal agency as part of or in connection with a bid or proposal to enter into a Federal agency procurement contract, if that information...

  3. 48 CFR 3.104-1 - Definitions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... BUSINESS PRACTICES AND PERSONAL CONFLICTS OF INTEREST Safeguards 3.104-1 Definitions. As used in this... proposal information means any of the following information submitted to a Federal agency as part of or in connection with a bid or proposal to enter into a Federal agency procurement contract, if that information...

  4. 78 FR 56896 - Federal Acquisition Regulation; Information Collection; Prospective Subcontractor Requests for Bonds

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-09-16

    ...: Notice of request for public comments regarding an extension to an existing OMB clearance. SUMMARY: Under...: Ms. Cecelia L. Davis, Procurement Analyst, Acquisition Policy Division, GSA (202) 219-0202 or email... to obtaining financial protection against damages under Government contracts (e.g., use of bonds, bid...

  5. 29 CFR 95.46 - Procurement records.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Secretary of Labor GRANTS AND AGREEMENTS WITH INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, AND OTHER NON..., (b) justification for lack of competition when competitive bids or offers are not obtained, and (c) basis for award cost or price. [59 FR 38271, July 27, 1994, as amended at 72 FR 37104, July 9, 2007] ...

  6. Industrial Fuel Gas Demonstration Plant Program. Bid packages for materials (Deliverable No. 28)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    1979-01-01

    Fixed-price supply type bid packages for materials and/or service essentially are comprised of two parts, namely: (1) a technical requisition of the material, equipment, or service to be supplied; and (2) commercial and legal requirements, normally referred to as terms and conditions. Requisitions, providing technical requirements, for all equipment items identified for the Industrial Fuel Gas Demonstration Plant may be found in the 12 volumes of the Demonstration Plant Mechanical Design. The requisitions have been included within separate sections of the design report, sorted by appropriate plant unit. Combined with any General Notes Requisition and the necessary FWEC Job Standards,more » these various item requisitions provide all technical information for the prospective vendor to furnish his bid. The terms and conditions (boiler plate) to be included in the bid package identify all the contractual requirements which will be imposed upon the bidder. These requirements cover the conditions he must meet to bid on the particular item as well as the clauses to be included within the eventual purchase order/subcontract. A typical package of such terms and conditions is included.« less

  7. 48 CFR 14.503-2 - Step two.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Step two. 14.503-2 Section... AND CONTRACT TYPES SEALED BIDDING Two-Step Sealed Bidding 14.503-2 Step two. (a) Sealed bidding... submitting acceptable technical proposals in step one; (2) Include the provision prescribed in 14.201-6(t...

  8. 41 CFR 101-26.501-7 - Sale of vehicles.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 41 Public Contracts and Property Management 2 2012-07-01 2012-07-01 false Sale of vehicles. 101-26... PROGRAM 26.5-GSA Procurement Programs § 101-26.501-7 Sale of vehicles. GSA will not solicit trade-in bids when purchasing new motor vehicles for replacement purposes because experience has shown that suppliers...

  9. 41 CFR 101-26.501-7 - Sale of vehicles.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Sale of vehicles. 101-26... PROGRAM 26.5-GSA Procurement Programs § 101-26.501-7 Sale of vehicles. GSA will not solicit trade-in bids when purchasing new motor vehicles for replacement purposes because experience has shown that suppliers...

  10. 22 CFR 201.14 - Eligibility of bid and performance bonds and guaranties.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... APPLICABLE TO COMMODITY TRANSACTIONS FINANCED BY USAID Conditions Governing the Eligibility of Procurement... international trade for the type of transaction and commodity involved. Bonds or guaranties may be payable in U.S. dollars, or a freely convertible currency or local currency, and shall be posted in favor of the...

  11. 22 CFR 201.14 - Eligibility of bid and performance bonds and guaranties.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... APPLICABLE TO COMMODITY TRANSACTIONS FINANCED BY USAID Conditions Governing the Eligibility of Procurement... international trade for the type of transaction and commodity involved. Bonds or guaranties may be payable in U.S. dollars, or a freely convertible currency or local currency, and shall be posted in favor of the...

  12. 4 CFR 21.1 - Filing a protest.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 4 Accounts 1 2010-01-01 2010-01-01 false Filing a protest. 21.1 Section 21.1 Accounts GOVERNMENT ACCOUNTABILITY OFFICE GENERAL PROCEDURES BID PROTEST REGULATIONS § 21.1 Filing a protest. (a) An interested party... 20548, Attention: Procurement Law Control Group. (c) A protest filed with GAO shall: (1) Include the...

  13. 13 CFR 121.1004 - What time limits apply to size protests?

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ..., after bid or proposal opening. (2) Negotiated procurement. A protest must be received by the contracting... paragraph (e), for purposes of the SBIR program the contracting officer and SBA may file a protest in... purposes of the SBIR and STTR programs. Notwithstanding paragraph (e), for purposes of the SBIR and STTR...

  14. 29 CFR 4.141 - General criteria for measuring amount.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Government for such work under his contract or may even agree to pay the Government in return for the right... formal advertising, in arriving at the aggregate amount involved, there must be included all property and... single advertisement for bids if the procurement were being effected by formal advertising. Therefore, if...

  15. 48 CFR 19.403 - Small Business Administration breakout procurement center representatives.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... center, technical data necessary for the preparation of a competitive solicitation package for any item... arising out of restrictions on the rights of the United States in technical data and, when appropriate... data; (5) Have access to procurement records and other data of the procurement center commensurate with...

  16. Research on Bidding Decision-making of International Public-Private Partnership Projects

    NASA Astrophysics Data System (ADS)

    Hu, Zhen Yu; Zhang, Shui Bo; Liu, Xin Yan

    2018-06-01

    In order to select the optimal quasi-bidding project for an investment enterprise, a bidding decision-making model for international PPP projects was established in this paper. Firstly, the literature frequency statistics method was adopted to screen out the bidding decision-making indexes, and accordingly the bidding decision-making index system for international PPP projects was constructed. Then, the group decision-making characteristic root method, the entropy weight method, and the optimization model based on least square method were used to set the decision-making index weights. The optimal quasi-bidding project was thus determined by calculating the consistent effect measure of each decision-making index value and the comprehensive effect measure of each quasi-bidding project. Finally, the bidding decision-making model for international PPP projects was further illustrated by a hypothetical case. This model can effectively serve as a theoretical foundation and technical support for the bidding decision-making of international PPP projects.

  17. 10-MWe solar-thermal central-receiver pilot plant: collector subsystem foundation construction. Revision No. 1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1979-12-18

    Bid documents are provided for the construction of the collector subsystem foundation of the Barstow Solar Pilot Plant, including invitation to bid, bid form, representations and certifications, construction contract, and labor standards provisions of the Davis-Bacon Act. Instructions to bidders, general provisions and general conditions are included. Technical specifications are provided for the construction. (LEW)

  18. Construction Management for Educational Facilities: Professional Services' Procurement and Competitive Bid Statutes.

    ERIC Educational Resources Information Center

    Goldblatt, Steven M.; Wood, R. Craig

    Construction management is utilized when a school district engages a firm to coordinate a total project. The construction management seeks to save an owner time and cost primarily through better contractor coordination and project management. These services may include the planning and design phases of the project as well as the actual…

  19. 41 CFR 101-26.501-7 - Sale of vehicles.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 41 Public Contracts and Property Management 2 2011-07-01 2007-07-01 true Sale of vehicles. 101-26... PROGRAM 26.5-GSA Procurement Programs § 101-26.501-7 Sale of vehicles. GSA will not solicit trade-in bids... that are being replaced will be disposed of by sale as set forth in Part 101-46. [57 FR 47779, Oct. 20...

  20. 41 CFR 101-26.501-7 - Sale of vehicles.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 41 Public Contracts and Property Management 2 2013-07-01 2012-07-01 true Sale of vehicles. 101-26... PROGRAM 26.5-GSA Procurement Programs § 101-26.501-7 Sale of vehicles. GSA will not solicit trade-in bids... that are being replaced will be disposed of by sale as set forth in Part 101-46. [57 FR 47779, Oct. 20...

  1. Competitive bidding for health insurance contracts: lessons from the online HMO auctions.

    PubMed

    Gupta, Alok; Parente, Stephen T; Sanyal, Pallab

    2012-12-01

    Healthcare is an important social and economic component of modern society, and the effective use of information technology in this industry is critical to its success. As health insurance premiums continue to rise, competitive bidding may be useful in generating stronger price competition and lower premium costs for employers and possibly, government agencies. In this paper, we assess an endeavor by several Fortune 500 companies to reduce healthcare procurement costs for their employees by having HMOs compete in open electronic auctions. Although the auctions were successful in generating significant cost savings for the companies in the first year, i.e., 1999, they failed to replicate the success and were eventually discontinued after two more years. Over the past decade since the failed auction experiment, effective utilization of information technologies have led to significant advances in the design of complex electronic markets. Using this knowledge, and data from the auctions, we point out several shortcomings of the auction design that, we believe, led to the discontinuation of the market after three years. Based on our analysis, we propose several actionable recommendations that policy makers can use to design a sustainable electronic market for procuring health insurance.

  2. Department of the Air Force Justification of Estimates for Fiscal Year 1983 Submitted to Congress February 1982. Aircraft Procurement, Missile Procurement, Other Procurement

    DTIC Science & Technology

    1982-02-01

    SUPPORT EQUIP. .1 TOTAL 2 1.4 190 4.5 82 2.1 274 8.c METTHOD OF IIIPLE14ENTATIOI: IIUSTALLATION -. DEPOT/FIELD TEAl! LEAD TI:.E - 9 ,,O,|TIS * LESS THAN...Mobility Equipmnent 287 97.14 427 Scientific /Technical Intelligence 292 5.6 4128 Air Force Technical Application Center* 295 15.8 � Photo Processing...Line Item: 292 Nomenclature: Scientific /Technical Lnteliigerce Mission/Description: Thic program provide. data reduction, photo processing. and printing

  3. Procurement engineering - the productivity factor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bargerstock, S.B.

    1993-01-01

    The industry is several years on the road to implementation of the Nuclear Management and Resources Council (NUMARC) initiatives on commercial-grade item dedication and procurement. Utilities have taken several approaches to involve engineering in the procurement process. A common result for the approaches is the additional operations and maintenance (O M) cost imposed by the added resource requirements. Procurement engineering productivity is a key element in controlling this business area. Experience shows that 400 to 500% improvements in productivity are possible with a 2-yr period. Improving the productivity of the procurement engineering function is important in today's competitive utility environment.more » Procurement engineering typically involves four distinct technical evaluation responsibilities along with several administrative areas. Technical evaluations include the functionally based safety classification of replacement components and parts (lacking a master parts list), the determination of dedication requirements for safety-related commercial-grade items, the preparation of a procurement specification to maintain the licensed design bases, and the equivalency evaluation of alternate items not requiring the design-change process. Administrative duties include obtaining technical review of vendor-supplied documentation, identifying obsolete parts and components, resolving material nonconformances, initiating the design-change process for replacement items (as needed), and providing technical support to O M. Although most utilities may not perform or require all the noted activities, a large percentage will apply to each utility station.« less

  4. How to compete for NASA contracts

    NASA Technical Reports Server (NTRS)

    1989-01-01

    Various studies and NASA experience have found that business concerns can provide a vital and significant impetus to technological innovation, not only in the fields of space and aeronautics, but also in national technological growth. NASA personnel are determined to foster the development of small business capabilities in technical areas that will support future projects and establish a small business base for the development and production of flight hardware for future missions. The solicitation process for Federal contracts has grown quite complex over the years. Where possible, we continue to try to simplify and streamline procedures for obtaining and performing these contracts. This booklet is designed to help understand NASA solicitations, find the information needed in deciding whether to respond, and improve chances for success. The first section of this booklet will answer general questions concerning the various types of NASA solicitations. Your specific questions on how to prepare bids will be answered in the second section, which is followed by a third section on the unique features of construction contracting. A fourth section describes how to submit technical and cost proposals for the negotiated procurement process. Some tips or suggestions, called DO's and DONT's, are placed at the end of the second, third, and fourth sections. Then, in the fifth section, ways to seek business as a subcontractor are identified.

  5. 7 CFR 1780.54 - Technical services.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., Constructing and Inspections § 1780.54 Technical services. Owners are responsible for providing the engineering, architect and environmental services necessary for planning, designing, bidding, contracting, inspecting...

  6. Nutrition Quality of US School Snack Foods: A First Look at 2011-2014 Bid Records in 8 School Districts

    ERIC Educational Resources Information Center

    Wang, Y. Claire; Hsiao, Amber; Chamberlin, Peter; Largay, McKenzie; Archibald, Abbie; Malone, Andrew; Stevelos, JoAnn

    2017-01-01

    Background:As part of the Healthy, Hunger-Free Kids Act, snacks, and desserts sold in K-12 schools as of the 2014-2015 school year are required to meet the "Smart Snacks" nutritional guidelines. Although studies exist in tracking progress in local and national efforts, the proportion of snack food procured by school districts compliant…

  7. 76 FR 76713 - California Independent System Operator Corporation; Notice of Technical Conference

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-12-08

    ...) proposal to eliminate convergence bidding at intertie scheduling points. Take notice that such conference...'s proposal to eliminate convergence bidding at intertie scheduling points. A subsequent notice... Act of 1973. For accessibility accommodations please send an email to [email protected] or call...

  8. 48 CFR 14.503-1 - Step one.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Step one. 14.503-1 Section... AND CONTRACT TYPES SEALED BIDDING Two-Step Sealed Bidding 14.503-1 Step one. (a) Requests for... use the two step method. (3) The requirements of the technical proposal. (4) The evaluation criteria...

  9. 13 CFR 146.205 - Professional and technical services.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Professional and technical... RESTRICTIONS ON LOBBYING Activities by Own Employees § 146.205 Professional and technical services. (a) The... technical services rendered directly in the preparation, submission, or negotiation of any bid, proposal, or...

  10. 48 CFR 852.211-72 - Technical industry standards.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

  11. 48 CFR 852.211-72 - Technical industry standards.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

  12. 48 CFR 852.211-72 - Technical industry standards.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

  13. 48 CFR 852.211-72 - Technical industry standards.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

  14. 48 CFR 852.211-72 - Technical industry standards.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

  15. 76 FR 8720 - Notice of Proposed Solicitation for Cooperative Agreement Applications (SCAA)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-15

    ... Procurement Technical Assistance Program (PTAP) by awarding cost sharing cooperative agreements to assist eligible entities in establishing or maintaining procurement technical assistance centers (PTACs) pursuant... available for distribution. Written comments regarding this proposed SCAA may be submitted via mail to...

  16. 75 FR 24663 - Notice of Proposed Solicitation for Cooperative Agreement Applications (SCAA)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-05

    ... Procurement Technical Assistance Program (PTAP) by awarding cost sharing cooperative agreements to assist eligible entities in establishing or maintaining procurement technical assistance centers (PTACs) pursuant... recipients'' at the bottom of the page). Printed copies are not available for distribution. Written comments...

  17. Competition in Weapon Systems Acquisition: Cost Analyses of Some Issues

    DTIC Science & Technology

    1990-09-01

    10% increments , also known as the step-ladder bids) submitted by the contractor in the first year of dual source procurement. The triangles represent...savings by subtracting annual incremental government costs, stated in constant dollars, from (3). (5) Estimate nonrecurring start-up costs, stated in...constant dollars, by fiscal year. (6) Estimate incremental logistic support costs, stated in constant dollars. by fiscal year. (7) Calculate a net

  18. Naval Supply Systems Command Fleet Logistics Center

    DTIC Science & Technology

    2012-08-08

    Partial small business set - aside is a potential consideration   12-month Base plus two options   Synopsis N00604-11-R-3006 on NECO and FedBizOpps...2012 Navy Gold Coast Small Business Procurement Event 8 August 2012 #1 PRIORITY = Operating Forces Support …while ensuring Joint...while ensuring Joint Base Success FedBid.com Reverse Auction Website 8 Small Business Assistance #1 PRIORITY = Operating Forces

  19. 48 CFR 252.227-7016 - Rights in bid or proposal information.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... terms “technical data” and “computer software” are defined in the Rights in Technical Data—Noncommercial... delivery of technical data, the term “computer software” is defined in the Rights in Noncommercial Computer... Research Program, the Rights in Noncommercial Technical Data and Computer Software—Small Business...

  20. 48 CFR 252.227-7016 - Rights in bid or proposal information.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... terms “technical data” and “computer software” are defined in the Rights in Technical Data—Noncommercial... delivery of technical data, the term “computer software” is defined in the Rights in Noncommercial Computer... Research Program, the Rights in Noncommercial Technical Data and Computer Software—Small Business...

  1. 48 CFR 252.227-7016 - Rights in bid or proposal information.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... terms “technical data” and “computer software” are defined in the Rights in Technical Data—Noncommercial... delivery of technical data, the term “computer software” is defined in the Rights in Noncommercial Computer... Research Program, the Rights in Noncommercial Technical Data and Computer Software—Small Business...

  2. 48 CFR 252.227-7016 - Rights in bid or proposal information.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... terms “technical data” and “computer software” are defined in the Rights in Technical Data—Noncommercial... delivery of technical data, the term “computer software” is defined in the Rights in Noncommercial Computer... Research Program, the Rights in Noncommercial Technical Data and Computer Software—Small Business...

  3. 48 CFR 252.227-7016 - Rights in bid or proposal information.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... terms “technical data” and “computer software” are defined in the Rights in Technical Data—Noncommercial... delivery of technical data, the term “computer software” is defined in the Rights in Noncommercial Computer... Research Program, the Rights in Noncommercial Technical Data and Computer Software—Small Business...

  4. 10 CFR 601.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  5. 10 CFR 601.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  6. 49 CFR 20.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  7. 34 CFR 82.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  8. 22 CFR 519.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  9. 49 CFR 20.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  10. 43 CFR 18.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  11. 34 CFR 82.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  12. 22 CFR 227.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  13. 22 CFR 519.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  14. 45 CFR 1168.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  15. 49 CFR 20.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  16. 45 CFR 1168.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  17. 22 CFR 138.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  18. 22 CFR 138.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  19. 34 CFR 82.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  20. 10 CFR 601.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  1. 22 CFR 519.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  2. 10 CFR 601.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  3. 45 CFR 1168.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  4. 22 CFR 227.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  5. 22 CFR 138.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  6. 34 CFR 82.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  7. 22 CFR 227.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  8. 49 CFR 20.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  9. Cost effective nuclear commercial grade dedication

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Maletz, J.J.; Marston, M.J.

    1991-01-01

    This paper describes a new computerized database method to create/edit/view specification technical data sheets (mini-specifications) for procurement of spare parts for nuclear facility maintenance and to develop information that could support possible future facility life extension efforts. This method may reduce cost when compared with current manual methods. The use of standardized technical data sheets (mini-specifications) for items of the same category improves efficiency. This method can be used for a variety of tasks, including: Nuclear safety-related procurement; Non-safety related procurement; Commercial grade item procurement/dedication; Evaluation of replacement items. This program will assist the nuclear facility in upgrading its procurementmore » activities consistent with the recent NUMARC Procurement Initiative. Proper utilization of the program will assist the user in assuring that the procured items are correct for the applications, provide data to assist in detecting fraudulent materials, minimize human error in withdrawing database information, improve data retrievability, improve traceability, and reduce long-term procurement costs.« less

  10. 49 CFR 20.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  11. 28 CFR 69.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  12. 6 CFR 9.23 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  13. 22 CFR 311.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  14. 7 CFR 3018.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  15. 7 CFR 3018.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  16. 12 CFR 411.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  17. 10 CFR 601.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  18. 45 CFR 1158.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  19. 7 CFR 3018.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  20. 22 CFR 519.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  1. 15 CFR 28.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  2. 15 CFR 28.300 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  3. 20 CFR 438.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... analysis directly applying any professional or technical discipline. For example, drafting of a legal... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  4. 22 CFR 311.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  5. 34 CFR 82.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  6. 22 CFR 138.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  7. 20 CFR 438.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  8. 43 CFR 18.300 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  9. 12 CFR 411.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  10. 7 CFR 3018.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  11. 7 CFR 3018.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  12. 22 CFR 138.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  13. 6 CFR 9.23 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  14. 6 CFR 9.23 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  15. 20 CFR 438.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  16. 6 CFR 9.23 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  17. 15 CFR 28.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  18. 43 CFR 18.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  19. 7 CFR 3018.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  20. 7 CFR 3018.300 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  1. 22 CFR 519.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  2. 22 CFR 227.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  3. 45 CFR 1168.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  4. 22 CFR 227.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  5. 28 CFR 69.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  6. 49 CFR 20.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  7. 28 CFR 69.300 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  8. 15 CFR 28.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  9. 43 CFR 18.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  10. 45 CFR 1158.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  11. 28 CFR 69.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... limited to advice and analysis directly applying any professional or technical discipline. For example... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  12. 7 CFR 3018.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  13. 22 CFR 138.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  14. 20 CFR 438.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... analysis directly applying any professional or technical discipline. For example, drafting of a legal... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  15. 34 CFR 82.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  16. 12 CFR 411.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  17. 20 CFR 438.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... analysis directly applying any professional or technical discipline. For example, drafting of a legal... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  18. 45 CFR 1168.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  19. 22 CFR 311.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting of a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  20. 45 CFR 1158.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  1. 45 CFR 1168.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  2. 10 CFR 601.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  3. 22 CFR 227.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  4. 34 CFR 82.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  5. 20 CFR 438.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  6. 22 CFR 519.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... and analysis directly applying any professional or technical discipline. For example, drafting or a... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  7. 12 CFR 411.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... advice and analysis directly applying any professional or technical discipline. For example, drafting of... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  8. 29 CFR 93.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  9. 43 CFR 18.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  10. 24 CFR 87.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  11. 28 CFR 69.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  12. 6 CFR 9.15 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  13. 41 CFR 105-69.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... any professional or technical discipline. For example, drafting of a legal document accompanying a bid..., communications with the intent to influence made by an engineer providing an engineering analysis prior to the...

  14. 15 CFR 28.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  15. 29 CFR 93.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  16. 32 CFR 28.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... or technical discipline. For example, drafting of a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  17. 45 CFR 604.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  18. 18 CFR 1315.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  19. 18 CFR 1315.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  20. 44 CFR 18.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... any professional or technical discipline. For example, drafting of a legal document accompanying a bid..., communications with the intent to influence made by an engineer providing an engineering analysis prior to the...

  1. 24 CFR 87.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  2. 45 CFR 604.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  3. 12 CFR 411.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

  4. 41 CFR 105-69.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... any professional or technical discipline. For example, drafting of a legal document accompanying a bid..., communications with the intent to influence made by an engineer providing an engineering analysis prior to the...

  5. 45 CFR 1230.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... any professional or technical discipline. For example, drafting of a legal document accompanying a bid..., communications with the intent to influence made by an engineer providing an engineering analysis prior to the...

  6. 28 CFR 69.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  7. 13 CFR 146.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  8. 31 CFR 21.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  9. 6 CFR 9.15 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  10. 18 CFR 1315.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  11. 22 CFR 712.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  12. 44 CFR 18.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... any professional or technical discipline. For example, drafting of a legal document accompanying a bid..., communications with the intent to influence made by an engineer providing an engineering analysis prior to the...

  13. 40 CFR 34.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  14. 28 CFR 69.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  15. 43 CFR 18.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  16. 32 CFR 28.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... or technical discipline. For example, drafting of a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  17. 22 CFR 712.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  18. 15 CFR 28.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  19. 40 CFR 34.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  20. 31 CFR 21.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  1. 24 CFR 87.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  2. 44 CFR 18.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... any professional or technical discipline. For example, drafting of a legal document accompanying a bid..., communications with the intent to influence made by an engineer providing an engineering analysis prior to the...

  3. 45 CFR 93.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  4. 38 CFR 45.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... or technical discipline. For example, drafting of a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  5. 14 CFR 1271.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  6. 24 CFR 87.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  7. 45 CFR 1158.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

  8. 13 CFR 146.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  9. 31 CFR 21.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  10. 15 CFR 28.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  11. 41 CFR 105-69.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... or technical discipline. For example, drafting or a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  12. 45 CFR 604.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  13. 43 CFR 18.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  14. 14 CFR 1271.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  15. 6 CFR 9.15 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  16. 40 CFR 34.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  17. 15 CFR 28.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  18. 12 CFR 411.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

  19. 45 CFR 1230.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... any professional or technical discipline. For example, drafting of a legal document accompanying a bid..., communications with the intent to influence made by an engineer providing an engineering analysis prior to the...

  20. 18 CFR 1315.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  1. 28 CFR 69.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  2. 41 CFR 105-69.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... or technical discipline. For example, drafting or a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  3. 38 CFR 45.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... or technical discipline. For example, drafting of a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  4. 45 CFR 93.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  5. 45 CFR 1230.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... any professional or technical discipline. For example, drafting of a legal document accompanying a bid..., communications with the intent to influence made by an engineer providing an engineering analysis prior to the...

  6. 13 CFR 146.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  7. 41 CFR 105-69.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... or technical discipline. For example, drafting or a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  8. 38 CFR 45.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... or technical discipline. For example, drafting of a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  9. 45 CFR 1158.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

  10. 32 CFR 28.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... or technical discipline. For example, drafting of a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  11. 45 CFR 1158.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

  12. 6 CFR 9.15 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  13. 45 CFR 93.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  14. 29 CFR 93.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  15. 22 CFR 712.205 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  16. 45 CFR 93.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  17. 41 CFR 105-69.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... any professional or technical discipline. For example, drafting of a legal document accompanying a bid..., communications with the intent to influence made by an engineer providing an engineering analysis prior to the...

  18. 44 CFR 18.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... any professional or technical discipline. For example, drafting of a legal document accompanying a bid..., communications with the intent to influence made by an engineer providing an engineering analysis prior to the...

  19. 38 CFR 45.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... or technical discipline. For example, drafting of a legal document accompanying a bid or proposal by... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  20. 12 CFR 411.300 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

  1. 14 CFR 1271.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  2. 12 CFR 411.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... analysis directly applying any professional or technical discipline. For example, drafting or a legal... engineering analysis prior to the preparation or submission of a bid or proposal are not allowable under this...

  3. 31 CFR 21.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  4. 13 CFR 146.205 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  5. 29 CFR 93.205 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... professional or technical discipline. For example, drafting of a legal document accompanying a bid or proposal... the intent to influence made by an engineer providing an engineering analysis prior to the preparation...

  6. An analysis of 1986 drug procurement practices in hospitals within the United States.

    PubMed

    Smolarek, R T; Powell, M F; Solomon, D K; Boike, S C

    1989-09-01

    The purpose of this study was to statistically answer a set of predefined objectives concerning pharmaceutical procurement. The key indicators were assumed to be cost per patient day and turnover rate. Of the 5,911 surveys mailed, 709 surveys were returned for a 12% response rate. The following statements were based on attempts to answer the six predetermined objectives. Pharmaceutical purchasing is controlled by pharmacy departments to the extent that comparisons to pharmaceutical purchasing by materials management departments was not possible. Prime vendor purchasing is the procurement method of choice. Competitive bidding through a group process is so popular that a valid comparison to nongroup bidding could not be accomplished with the results of this survey. Certain variables of group purchasing such as group age, contract adherence, and volume commitment, do not appear to be correlated to purchasing outcomes in this study. When comparing government to private hospitals, the private sector seems to have an advantage in managing turnover rates. Cost per patient day results were less conclusive. As single and multiple hospital systems were compared for purchasing outcomes, the results were not totally conclusive. Although, multiple hospital systems had a significantly higher turnover rate. Finally, a comparison based on the use, or lack of use, of prime vendor arrangements demonstrated interesting results. The duration of contract did not significantly affect the purchasing outcomes. Other hospital variables such as size, type, ownership, and organization, demonstrated notable trends. The importance of examining hospitals based on case mix and mission seems to be most important. Also, the ability to relate purchasing outcomes with formulary management strategies needs further study before conclusive statements can be adopted.

  7. 48 CFR 52.214-23 - Late submissions, modifications, revisions, and withdrawals of technical proposals under two-step...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... resume. (e) Technical proposals may be withdrawn by written notice received at any time before the exact..., modifications, revisions, and withdrawals of technical proposals under two-step sealed bidding. 52.214-23... Late submissions, modifications, revisions, and withdrawals of technical proposals under two-step...

  8. Supporting SMEs in public sector bids.

    PubMed

    James, Edward

    2016-03-01

    Edward James, workstream lead, Estates, Facilities and Professional Services Workstream, at NHS London Procurement Partnership (pictured), looks at the workings and benefits of Dynamic Purchasing Systems--electronic systems used by a public bodies to purchase commonly used goods, works, or services. One of the major benefits, he explains, is that under a 'DPS'--an 'open market' system revised in 2015--smaller businesses have a greater opportunity to win business than in traditional ('closed') framework agreements.

  9. Design-Build vs Design-Bid-Build: A Procurement Method Selection Framework

    DTIC Science & Technology

    2006-08-01

    Kumaraswamy and Dissanayaka [16,17], Molenaar [12], Love, Skitmore, and Earl [3], and Konchar and Sanvido [ 13]. Kumaraswamy and Dissanayaka explored the...measuring 11 performance areas [ 16, 17]. Love, Skitmore, and Earl used expert surveys to poll attitudes toward different delivery options [3], while Molenaar ... Molenaar , Keith R., and Robinson, Graham D., Selection Factors and Success Criteria for Design-Build in the U.S. and U.K., University of Colorado, 1997

  10. A New Paradigm to Address Bid Protests

    DTIC Science & Technology

    2010-08-02

    A two- player game model is being developed by members of the NPS Protest Project team that allows for shared awards (split buys). Split-buy remedies...11 - k^s^i=mlpqdo^ar^qb=p`elli= = The literature generally focuses on two players : a disappointed bidder20 and the government. In fact, the...government can be broken into several distinct players , each of which might expect a challenge from a disappointed bidder: procurement officials (POs) and

  11. 77 FR 60690 - Auction of FM Broadcast Construction Permits Scheduled for March 26, 2013; Comment Sought on...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-04

    ... technical and marketplace factors that may have a bearing on the value of the construction permits for... balances speed with the bidders' need to study round results and adjust their bidding strategies. The... number of rounds per day, depending upon bidding activity and other factors. The Bureaus seek comment on...

  12. 78 FR 11179 - Auction of Lower and Upper Paging Bands Licenses Scheduled for July 16, 2013; Comment Sought on...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-15

    ... investigating and evaluating all technical and marketplace factors that may have a bearing on the value of the... cooperate, collaborate, or communicate, including discussing bids, bidding strategies, or post-auction... schedule in order to foster an auction pace that reasonably balances speed with the bidders' need to study...

  13. 44 CFR 18.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  14. 32 CFR 28.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... technical discipline. For example, drafting of a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  15. 38 CFR 45.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  16. 44 CFR 18.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  17. 38 CFR 45.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  18. 45 CFR 1230.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  19. 32 CFR 28.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... technical discipline. For example, drafting of a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  20. 14 CFR § 1271.205 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ...” shall be limited to advice and analysis directly applying any professional or technical discipline. For... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  1. 38 CFR 45.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  2. 44 CFR 18.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  3. 32 CFR 28.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... technical discipline. For example, drafting of a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  4. 45 CFR 1230.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... technical discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  5. 76 FR 13297 - Defense Federal Acquisition Regulation Supplement; Technical Amendments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-11

    ... 215 Government procurement. Ynette R. Shelkin, Editor, Defense Acquisition Regulations System... Director, Defense Procurement and Acquisition Policy. DATES: Effective Date: March 11, 2011. Applicability... adding a section at 215.300 with a reference to Director, Defense Procurement and Acquisition Policy...

  6. USSR Report, International Affairs.

    DTIC Science & Technology

    1987-04-07

    the policies, views or attitudes of the U.S. Government. PROCUREMENT OF PUBLICATIONS JPRS publications may be ordered from the National Technical...20402. Correspondence pertaining to matters other than procurement may be addressed to Joint Publications Research Service, 1000 North Glebe Road...of the quasi-electronic or digital electronic type. For this, we have available modern technical solutions and industrial production capabilities

  7. 76 FR 14572 - Federal Acquisition Regulation; Technical Amendments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-16

    ... Acquisition Regulations. List of Subjects in 48 CFR Parts 18, 19, and 52 Government procurement. Dated: March... in paragraph (b) by removing ``http:// www.whitehouse.gov/omb/procurement/guides/emergency_acquisitions_ guide.pdf'' and adding ``http://www.whitehouse.gov/sites/default/files/ omb/assets/procurement...

  8. 7 CFR 226.22 - Procurement standards.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... pertinent to the following: rationale for the method of procurement, selection of contract type, contractor... competition. The description may include a statement of the qualitative nature of the material, product or... technical resources. (i) Program procurements shall be made by one of the following methods: (1) Small...

  9. 7 CFR 277.14 - Procurement standards.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... qualitative nature of the material, product or service desired and, when necessary, shall set forth those... technical resources. (g) Procurement methods. State agency procurements made in whole or in part with program funds shall be by one of the following methods: (1) Small purchase procedures are those relatively...

  10. 76 FR 27274 - Defense Federal Acquisition Regulation Supplement; Technical Amendment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-11

    ... procurement programs, it must provide written notice of the determination to the GSA Suspension and Debarment Official. List of Subjects in 48 CFR Part 209 Government procurement. Ynette R. Shelkin, Editor, Defense... suspended from procurement programs, it must provide written notice of the determination to the General...

  11. 77 FR 13013 - Defense Federal Acquisition Regulation Supplement; Technical Amendments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-05

    ... Organization Government Procurement Agreement and the Free Trade Agreements, as determined by the United States... 252 Government procurement. Ynette R. Shelkin, Editor, Defense Acquisition Regulations System...

  12. 48 CFR 2901.603-71 - Contracting Officer's Technical Representatives (COTR).

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... maintained by the COTR; (5) Reference to meeting applicable requirements for ethics, procurement integrity... training specifically in procurement ethics, either through courses offered periodically by the Department...

  13. Southeast Asia Report

    DTIC Science & Technology

    1985-10-01

    significant contributions to eliminating obstacles in production and business , stimulating the development of production, intensifying procurements in...views or attitudes of the U.S. Government. PROCUREMENT OF PUBLICATIONS JPRS publications may be ordered from the National Technical Information...Washington, D.C. 20402. Correspondence pertaining to matters other than procurement may be addressed to Joint Publications Research Service, 1000

  14. Remote sensing procurement package: A technical guide for state and local governments

    NASA Technical Reports Server (NTRS)

    1981-01-01

    The guide provides the tools and techniques for procuring remote sensing products and services. It is written for administrators, procurement officials and line agency staff who are directly involved in identifying information needs; defining remote sensing project requirements; soliciting and evaluating contract responses and negotiating, awarding, and administering contracts.

  15. 7 CFR 2.93 - Director, Office of Procurement and Property Management.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... agricultural sciences, related to establishing and implementing Federal biobased procurement and voluntary... available to organizations excess or surplus computers or other technical equipment of the Department for...

  16. 7 CFR 2.93 - Director, Office of Procurement and Property Management.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... agricultural sciences, related to establishing and implementing Federal biobased procurement and voluntary... available to organizations excess or surplus computers or other technical equipment of the Department for...

  17. 7 CFR 2.93 - Director, Office of Procurement and Property Management.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... agricultural sciences, related to establishing and implementing Federal biobased procurement and voluntary... available to organizations excess or surplus computers or other technical equipment of the Department for...

  18. 7 CFR 2.93 - Director, Office of Procurement and Property Management.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... agricultural sciences, related to establishing and implementing Federal biobased procurement and voluntary... available to organizations excess or surplus computers or other technical equipment of the Department for...

  19. 22 CFR 124.13 - Procurement by United States persons in foreign countries (offshore procurement).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... (build-to-print means producing an end-item (i.e., system, subsystem or component) from technical... of any information which discloses design methodology, engineering analysis, detailed process...

  20. 22 CFR 124.13 - Procurement by United States persons in foreign countries (offshore procurement).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... (build-to-print means producing an end-item (i.e., system, subsystem or component) from technical... of any information which discloses design methodology, engineering analysis, detailed process...

  1. 22 CFR 124.13 - Procurement by United States persons in foreign countries (offshore procurement).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... (build-to-print means producing an end-item (i.e., system, subsystem or component) from technical... of any information which discloses design methodology, engineering analysis, detailed process...

  2. 22 CFR 124.13 - Procurement by United States persons in foreign countries (offshore procurement).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... (build-to-print means producing an end-item (i.e., system, subsystem or component) from technical... of any information which discloses design methodology, engineering analysis, detailed process...

  3. 22 CFR 124.13 - Procurement by United States persons in foreign countries (offshore procurement).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... (build-to-print means producing an end-item (i.e., system, subsystem or component) from technical... of any information which discloses design methodology, engineering analysis, detailed process...

  4. 78 FR 37697 - Federal Acquisition Regulation; Technical Amendments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-21

    ... changes to the FAR. List of Subject in 48 CFR Parts 8 and 52 Government procurement. Dated: June 13, 2013... SERVICES 0 2. Amend section 8.703 by revising the third sentence to read as follows: 8.703 Procurement list. * * * Questions concerning whether a supply item or service is on the Procurement List may be submitted at...

  5. A Technical Description of the Officer Procurement Model (TOPOPS). Final Report.

    ERIC Educational Resources Information Center

    Akman, Allan; And Others

    The Total Objective Plan for the Officer Procurement System (TOPOPS) is an aggregate-level, computer-based model of the Air Force Officer procurement system developed to operate on the UNIVAC 1108 system. It is designed to simulate officer accession and training and achieve optimal solutions in terms of either cost minimization or accession…

  6. A Conceptual View of the Officer Procurement Model (TOPOPS). Technical Report No. 73-73.

    ERIC Educational Resources Information Center

    Akman, Allan; Nordhauser, Fred

    This report presents the conceptual design of a computer-based linear programing model of the Air Force officer procurement system called TOPOPS. The TOPOPS model is an aggregate model which simulates officer accession and training and is directed at optimizing officer procurement in terms of either minimizing cost or maximizing accession quality…

  7. Microelectronics Status Analysis and Secondary Part Procureability Assessment of the THAAD Weapon System

    DTIC Science & Technology

    1999-10-01

    Technical Report 5-20448 & 5- 20449 Contract No. DAAH01-98-D-R001 Delivery Order No. 34 Microelectronics Status Analysis and Secondary Part...Procureability Assessment of the THAAD Weapon System. (5-20448 & 5- 20449 ) Final Technical Report for Period 21 January 1999 through 30 September 1999...Huntsville Huntsville, AL 35899 5. FUNDING NUMBERS 8. PERFORMING ORGANIZATION REPORT NUMBER 5-20448 & 5- 20449 9. SPONSORING/MONITORING AGENCY

  8. Drug procurement, the Global Fund and misguided competition policies

    PubMed Central

    2009-01-01

    In an effort to increase competition and decrease price, the Global Fund to Fight AIDS, Tuberculosis and Malaria recently began asking some grant recipients to use international competitive bidding processes for certain drug purchases. Unfortunately, for countries like Kenya, this request has caused more harm than good. After awarding the tender for its annual supply of the anti-malarial artemether-lumefantrine to the lowest bidder, Ajanta Pharma, Kenya experienced wide stock-outs in part due to the company's inability to supply the order in full and on time. Similar problems could arise in Uganda. Despite Kenya's experience, Uganda has awarded its next tender for artemether-lumefantrine to Ajanta Pharma. Uganda is already facing wide stock-outs and risks exacerbating an already dire situation the longer it takes to fulfil the procurement contract. A tender process based primarily on price cannot account for a company's ability to consistently supply sufficient product in time. PMID:20028536

  9. 34 CFR 82.300 - Professional and technical services.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Professional and technical services. 82.300 Section 82.300 Education Office of the Secretary, Department of Education NEW RESTRICTIONS ON LOBBYING Activities... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  10. 34 CFR 82.205 - Professional and technical services.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Professional and technical services. 82.205 Section 82.205 Education Office of the Secretary, Department of Education NEW RESTRICTIONS ON LOBBYING Activities... providing an engineering analysis prior to the preparation or submission of a bid or proposal are not...

  11. Audit Report on "Work for Others Performed by the Department of Energy for the Department of Defense"

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    Pursuant to the Atomic Energy Act of 1954, as amended, and the Economy Act of 1932, the Department of Energy and its semi-autonomous National Nuclear Security Administration (NNSA) provide research and technical assistance to other Federal agencies on a reimbursable, full cost recovery basis through the Work for Others (WFO) program. For the vast majority of WFO technical projects, Department Federal officials furnish administrative project oversight while the actual detailed scientific or technical work is completed by the Department's 'management and operating' contractors. These contractors are awarded a special contract type specifically created under the Federal Acquisition Regulation to managemore » and operate Department sites and facilities, including sophisticated laboratories and technical centers, on a government-owned, contractor-operated basis. With annual expenditures exceeding $1 billion, the Department of Defense (DoD) is one of the Department's largest WFO customers. Work performed for DoD at the Department's national laboratories and other facilities includes highly technical research in areas such as nuclear weapons systems, counter-terrorism, and in-theater troop support. The National Defense Authorization Act for Fiscal Year (FY) 2009, required the Inspectors General of the DoD and the Department to review procurement methods to determine whether the Department complied with DoD procurement requirements and/or whether alternative procurement policies were in place. In response, we focused our review on projects performed by NNSA because it completes the vast majority (approximately $900 million in FY 2008) of the Department's work for DoD. As part of this effort, and, at the specific request of the DoD Office of Inspector General (DoD OIG), we identified the universe of WFO technical projects that received new funding in the fourth quarter of FY 2008 at NNSA sites. We independently reviewed a judgmental sample of 11 projects selected by the DoD OIG to meet the objectives of this audit. Our review revealed that NNSA managed DoD WFO technical projects in a manner consistent with requirements of the Atomic Energy Act of 1954, the Federal Acquisition Regulation, and the Department's implementing guidance, the Department of Energy Acquisition Regulation. Because of the very nature of the Department's management and operating contracting model, WFO projects may not be technically compliant with DoD procurement regulations in certain instances. We found that NNSA did not let new contracts or task orders for the DoD WFO technical projects we reviewed and instead managed them under its existing internal control process as part of its management and operating contract structure. In one instance, we noted that the Department had, at DoD's request, supplemented its control structure to incorporate specific DoD procurement requirements. Senior Department of Energy procurement officials acknowledged that neither the Department nor NNSA modified their existing prime contracts to incorporate specific defense procurement requirements because such modifications would be inappropriate, costly, and inefficient. In short, they informed us that the Department had developed and implemented a series of controls designed to monitor overall contractor performance, including WFO technical projects. Department and NNSA officials noted, however, that they were willing to incorporate DoD specific requirements into work orders should DoD request and fund such efforts. Additional details regarding management of WFO technical projects are discussed in the body of this report.« less

  12. 48 CFR 14.501 - General.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... unduly restrictive statement of the Government's requirements, including an adequate technical data package, so that subsequent acquisitions may be made by conventional sealed bidding. This method is...

  13. 48 CFR 14.501 - General.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... unduly restrictive statement of the Government's requirements, including an adequate technical data package, so that subsequent acquisitions may be made by conventional sealed bidding. This method is...

  14. 48 CFR 14.501 - General.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... unduly restrictive statement of the Government's requirements, including an adequate technical data package, so that subsequent acquisitions may be made by conventional sealed bidding. This method is...

  15. 48 CFR 14.501 - General.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... unduly restrictive statement of the Government's requirements, including an adequate technical data package, so that subsequent acquisitions may be made by conventional sealed bidding. This method is...

  16. 48 CFR 14.501 - General.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... unduly restrictive statement of the Government's requirements, including an adequate technical data package, so that subsequent acquisitions may be made by conventional sealed bidding. This method is...

  17. 75 FR 77745 - Federal Acquisition Regulation; Technical Amendments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-13

    ... purposes of updating. List of Subjects in 48 CFR Parts 3, 5, 7, and 10 Government procurement. Dated... [Amended] 0 2. Amend section 3.104-1 by removing from the definition ``Federal agency procurement,'' in the...

  18. Vaccine procurement and self-sufficiency in developing countries.

    PubMed

    Woodle, D

    2000-06-01

    This paper discusses the movement toward self-sufficiency in vaccine supply in developing countries (and countries in transition to new economic and political systems) and explains special supply concerns about vaccine as a product class. It traces some history of donor support and programmes aimed at self-financing, then continues with a discussion about self-sufficiency in terms of institutional capacity building. A number of deficiencies commonly found in vaccine procurement and supply in low- and middle-income countries are characterized, and institutional strengthening with procurement technical assistance is described. The paper also provides information about a vaccine procurement manual being developed by the United States Agency for International Development (USAID) and the World Health Organization (WHO) for use in this environment. Two brief case studies are included to illustrate the spectrum of existing capabilities and different approaches to technical assistance aimed at developing or improving vaccine procurement capability. In conclusion, the paper discusses the special nature of vaccine and issues surrounding potential integration and decentralization of vaccine supply systems as part of health sector reform.

  19. One-year assessment of joint procurement of pharmaceuticals in the public health sector in Jordan.

    PubMed

    Al-Abbadi, Ibrahim; Qawwas, Abdelraouf; Jaafreh, Mahmoud; Abosamen, Taher; Saket, Maisa

    2009-06-01

    About 10% of the gross domestic product in Jordan is spent on health care, and almost one third of that is spent on pharmaceuticals. The public health sector in Jordan has 4 main governmental parties that purchase medicines independently through annual tenders (ie, the process of bidding, being awarded, ordering, paying for, and receiving drugs) issued in the generic (or scientific) name of the medicines or therapeutic groups. Double purchasing is a problem that leads to higher spending on drugs and poor availability of medicines throughout the year. To remedy this problem, a joint procurement process was established in Jordan in 2004 and went into practice in 2006. The aim of this research was to assess the first year of purchasing pharmaceuticals in the public health sector in Jordan through the joint procurement process for the 4 participating parties in comparison with purchasing pharmaceuticals independently before the institution of joint procurement. The first tender under the joint procurement process was issued in 2007 for antibiotics, anti-HIV medications, and antituberculosis agents, which represent 15% of the annual pharmaceutical public-sector purchases in Jordan. A research committee solicited lists of purchased quantities and final purchase prices of these pharmaceuticals obtained in 2006 by each participating group and in 2007 through the joint procurement process. The quantity-comparison method was used to compare the costs of drugs purchased in 2006 and 2007, and estimated cost savings were calculated for each product for each party for 2006 and 2007 under the assumption that the same quantities purchased by each participating party in 2006 would be purchased through joint procurement (prices of 2007). Purchasing through the joint procurement process achieved an estimated savings of 2.4%. This savings increased to 8.9% after excluding 1 item (a cephalosporin), the raw material price of which increased markedly in 2007 compared with 2006 because of an international shortage of raw materials. Based on these initial findings, applying a joint procurement system for pharmaceuticals in the public health sector in Jordan has potential to reduce expenditures for the purchase of medicines and provide treatment continuously throughout the year.

  20. 78 FR 41694 - Final Priority and Requirements; Education Facilities Clearinghouse

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-11

    ... the collection and dissemination of best practices for the planning, design, financing, procurement... Facilities Clearinghouse program is to provide technical assistance and training on the planning, design... dissemination of best practices for the planning, design, financing, procurement, construction, improvement...

  1. Small Business Participation in Air Force Procurement: Participation Trends and the Effect of Acquisition Reform Initiatives on Air Force Procurement via Selected Contract Types in Selected Product Categories

    DTIC Science & Technology

    2004-06-01

    directed the SBA to provide several types of assistance to small businesses , including technical and management assistance, loans, and assistance in...Directed the SBA to provide small businesses with technical and management assistance - Authorized the SBA to enter into contracts with Federal...command and center directors of small business , small business specialists, data managers , and Air Force Institute of Technology student researchers

  2. 29 CFR 95.44 - Procurement procedures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., record of past performance, financial and technical resources or accessibility to other necessary..., whenever practicable, of technical requirements in terms of functions to be performed or performance...

  3. 15 CFR 14.44 - Procurement procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., record of past performance, financial and technical resources or accessibility to other necessary... practicable, of technical requirements in terms of functions to be performed or performance required...

  4. Procurement of prescriber support systems.

    PubMed

    Kajbjer, Karin

    2008-01-01

    Supporting the process of medication selection and electronic management of prescriptions is a high priority issue in the eHealth strategies of many countries today. Procuring such systems can be quite difficult, especially if one should encourage suppliers from different countries to participate. The new ISO Technical Report 22,790 provides a new approach to facilitate this process by giving an international basis for specifying the functional characteristics desired. The paper describes the content of the report and discusses the procurement process in the light of the European public procurement directive and patient safety.

  5. 45 CFR 2543.44 - Procurement procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., record of past performance, financial and technical resources or accessibility to other necessary... technical requirements in terms of functions to be performed or performance required, including the range of...

  6. 36 CFR 1210.44 - Procurement procedures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., record of past performance, financial and technical resources or accessibility to other necessary... technical requirements in terms of functions to be performed or performance required, including the range of...

  7. 14 CFR 1260.144 - Procurement procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., record of past performance, financial and technical resources or accessibility to other necessary... technical requirements in terms of functions to be performed or performance required, including the range of...

  8. 40 CFR 35.4005 - What is a Technical Assistance Grant?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... public participation in decision making at eligible sites. A TAG allows your group to procure independent... Technical Assistance Grant? A Technical Assistance Grant (TAG) provides money for your group to obtain... how a technical advisor can help your group include, but are not limited to: (a) Reviewing preliminary...

  9. 40 CFR 35.4190 - How does my group identify a qualified technical advisor?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... technical advisor? 35.4190 Section 35.4190 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Technical Assistance Procuring A Technical Advisor Or Other Contractor with Tag Funds § 35.4190 How does my group identify a qualified...

  10. 48 CFR 719.271-5 - Cognizant technical officers.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... DEVELOPMENT SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Policies 719.271-5 Cognizant technical officers. Since the procurement process starts with the establishment of a requirement, the actions of the cognizant technical officers can affect the opportunity of small business to participate equitably...

  11. Strategic contracting practices to improve procurement of health commodities

    PubMed Central

    Arney, Leslie; Yadav, Prashant; Miller, Roger; Wilkerson, Taylor

    2014-01-01

    ABSTRACT Public-sector entities responsible for procurement of essential medicines and health commodities in developing countries often lack the technical capacity to efficiently ensure supply security. Under strict public scrutiny and pressures to be transparent, many agencies continue to use archaic procurement methods and to depend on inflexible forecasts and cumbersome tendering processes. On the basis of semi-structured literature reviews and interviews, we identified framework agreements as a strategic procurement practice used by the U.S. federal government that may also be suitable for global health supply chains. Framework agreements are long-term contracts that provide the terms and conditions under which smaller repeat purchasing orders may be issued for a defined period of time. Such agreements are common in U.S. and United Nations procurement systems and in other developed countries and multilateral organizations. In contrast, framework agreements appear to be seldom used in procurement of health commodities in countries of sub-Saharan Africa. The current practice of floating tenders multiple times a year contributes to long lead times and stock-outs, and it hampers the manufacturer's or supplier's ability to plan and respond to the government's needs. To date, government's use of strategic contracting practices in public procurement of health commodities has not received much attention in most developing countries. It may present an opportunity for substantial improvements in procurement efficiency and commodity availability. Enabling legislation and strengthened technical capacity to develop and manage long-term contracts could facilitate the use of framework contracts in sub-Saharan Africa, with improved supply security and cost savings likely to result. PMID:25276589

  12. Strategic contracting practices to improve procurement of health commodities.

    PubMed

    Arney, Leslie; Yadav, Prashant; Miller, Roger; Wilkerson, Taylor

    2014-08-01

    Public-sector entities responsible for procurement of essential medicines and health commodities in developing countries often lack the technical capacity to efficiently ensure supply security. Under strict public scrutiny and pressures to be transparent, many agencies continue to use archaic procurement methods and to depend on inflexible forecasts and cumbersome tendering processes. On the basis of semi-structured literature reviews and interviews, we identified framework agreements as a strategic procurement practice used by the U.S. federal government that may also be suitable for global health supply chains. Framework agreements are long-term contracts that provide the terms and conditions under which smaller repeat purchasing orders may be issued for a defined period of time. Such agreements are common in U.S. and United Nations procurement systems and in other developed countries and multilateral organizations. In contrast, framework agreements appear to be seldom used in procurement of health commodities in countries of sub-Saharan Africa. The current practice of floating tenders multiple times a year contributes to long lead times and stock-outs, and it hampers the manufacturer's or supplier's ability to plan and respond to the government's needs. To date, government's use of strategic contracting practices in public procurement of health commodities has not received much attention in most developing countries. It may present an opportunity for substantial improvements in procurement efficiency and commodity availability. Enabling legislation and strengthened technical capacity to develop and manage long-term contracts could facilitate the use of framework contracts in sub-Saharan Africa, with improved supply security and cost savings likely to result.

  13. 77 FR 23631 - Defense Federal Acquisition Regulation Supplement; Technical Amendments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-20

    ..., 217, 242, 245, and 252 Government procurement. Mary Overstreet, Editor, Defense Acquisition... ``Deputy Assistant Secretary of the Army (Procurement)'' in alphabetical order; 0 b. In the Army list by... purchase, travel, and fuel card programs is available in the ``Department of Defense Government Charge Card...

  14. 48 CFR 2052.215-75 - Proposal presentation and format.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., i.e., competitive vs. noncompetitive, and the cost evaluation. (c) “Written Technical and Management... * copies. (1) The written Technical and Management Proposal or Oral Presentation and Supporting... objectives of this procurement. (3) The written Technical Proposal or Oral Presentation and Supporting...

  15. Limit order book and its modeling in terms of Gibbs Grand-Canonical Ensemble

    NASA Astrophysics Data System (ADS)

    Bicci, Alberto

    2016-12-01

    In the domain of so called Econophysics some attempts have been already made for applying the theory of thermodynamics and statistical mechanics to economics and financial markets. In this paper a similar approach is made from a different perspective, trying to model the limit order book and price formation process of a given stock by the Grand-Canonical Gibbs Ensemble for the bid and ask orders. The application of the Bose-Einstein statistics to this ensemble allows then to derive the distribution of the sell and buy orders as a function of price. As a consequence we can define in a meaningful way expressions for the temperatures of the ensembles of bid orders and of ask orders, which are a function of minimum bid, maximum ask and closure prices of the stock as well as of the exchanged volume of shares. It is demonstrated that the difference between the ask and bid orders temperatures can be related to the VAO (Volume Accumulation Oscillator), an indicator empirically defined in Technical Analysis of stock markets. Furthermore the derived distributions for aggregate bid and ask orders can be subject to well defined validations against real data, giving a falsifiable character to the model.

  16. 48 CFR 811.103-70 - Technical industry standards.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... invitation for bids, request for proposals or request for quotations will so state. In no instance, where... request for quotation indicate that the label or certificate of only one such laboratory is acceptable...

  17. 77 FR 44065 - Federal Acquisition Regulation; Technical Amendments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-26

    ... FAR. List of Subjects in 48 CFR Parts 1, 16, 22, and 52 Government procurement. Dated: July 16, 2012...--APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS 22.1801 [Amended] 0 4. Amend section 22.1801 by-- 0 a... Affirmative Procurement of Biobased Products Under Service and Construction Contracts. * * * * * Affirmative...

  18. San Antonio's medical center corridor : lessons learned from the Metropolitan Model Deployment Initiative : reducing delay through integrated freeway and arterial management

    DOT National Transportation Integrated Search

    1997-04-01

    This report presents the results of research on procurement-related legal and non-technical issues which may be constraining the deployment of Intelligent Transportation Systems (ITS). The reports focus is on State and local procurement practices ...

  19. 48 CFR 715.303-70 - Responsibilities of USAID evaluation committees.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... evaluation committees. A technical evaluation committee shall be established for each proposed procurement. In each case, the committee shall be composed of a chair representing the cognizant technical office... representatives from other concerned offices as appropriate. (b) Technical evaluation procedures. (1) The...

  20. 40 CFR 35.4195 - Are there certain people my group cannot select to be our technical advisor, grant administrator...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... cannot select to be our technical advisor, grant administrator, or other contractor under the grant? 35... ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Technical Assistance Procuring A Technical Advisor Or Other Contractor with Tag Funds § 35.4195 Are there certain people my group cannot select to be our technical...

  1. 14 CFR 1271.300 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  2. 24 CFR 87.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  3. 24 CFR 87.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  4. 45 CFR 604.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  5. 22 CFR 712.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  6. 31 CFR 21.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  7. 14 CFR 1271.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  8. 22 CFR 311.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  9. 29 CFR 93.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  10. 22 CFR 712.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  11. 45 CFR 604.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  12. 22 CFR 311.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  13. 40 CFR 34.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  14. 24 CFR 87.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  15. 18 CFR 1315.300 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  16. 22 CFR 311.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  17. 31 CFR 21.300 - Professional and technical services.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  18. 45 CFR 604.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  19. 22 CFR 712.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  20. 31 CFR 21.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  1. 40 CFR 34.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  2. 29 CFR 93.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  3. 31 CFR 21.300 - Professional and technical services.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  4. 40 CFR 34.300 - Professional and technical services.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  5. 29 CFR 93.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  6. 48 CFR 31.205-18 - Independent research and development and bid and proposal costs.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... determine and exploit the potential of scientific discoveries or improvements in technology, materials... systematic use, under whatever name, of scientific and technical knowledge in the design, development, test...

  7. 48 CFR 31.205-18 - Independent research and development and bid and proposal costs.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... determine and exploit the potential of scientific discoveries or improvements in technology, materials... systematic use, under whatever name, of scientific and technical knowledge in the design, development, test...

  8. 48 CFR 31.205-18 - Independent research and development and bid and proposal costs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... determine and exploit the potential of scientific discoveries or improvements in technology, materials... systematic use, under whatever name, of scientific and technical knowledge in the design, development, test...

  9. 48 CFR 31.205-18 - Independent research and development and bid and proposal costs.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... determine and exploit the potential of scientific discoveries or improvements in technology, materials... systematic use, under whatever name, of scientific and technical knowledge in the design, development, test...

  10. Absence of significant dissent should be sufficient for deceased donor organ procurement in New Zealand.

    PubMed

    Douglas, Thomas M; Douglas, Nicholas M

    2009-10-01

    New Zealand's organ donation rates are among the lowest in the OECD. In a bid to increase organ availability, the New Zealand Human Tissue Act 2008 introduces new consent arrangements for deceased donor organ procurement. This article assesses these new arrangements and presents the case for further reform. Our assessment and arguments are based on philosophical analysis informed by empirical data on the effectiveness of alternative consent systems. We: 1) Identify widely held ethical judgments about policies and practices relevant to organ donation (e.g. those relating to coronial post-mortems), 2) Assess the implications of these judgments for the Human Tissue Act and the assumptions that underpin it, and 3) Derive policy recommendations that are consistent with the judgments. The Human Tissue Act 2008 retains a strong consent requirement for organ procurement: organs may not be transplanted unless either the deceased or the family consents. We argue that organ availability could and should be increased by shifting from a model that requires consent to one that requires the absence of significant dissent. We recommend that New Zealand adopt either 1) an organ donation system similar to the existing system for ordering coronial post-mortems, or 2) a variant of the 'opt-out' system already in place in several other countries.

  11. Three essays on auction markets

    NASA Astrophysics Data System (ADS)

    Shunda, Nicholas James

    This dissertation contains a series of theoretical investigations of auction markets. The essays it contains cover wholesale electricity markets, a popular selling mechanism on eBay, and supplier entry into multi-unit procurement auctions. The study in Chapter 1 compares the procurement cost-minimizing and productive efficiency performance of the auction mechanism used by independent system operators in wholesale electricity auction markets in the U.S. with that of a proposed alternative. The current practice allocates energy contracts as if the auction featured a discriminatory final payment method when, in fact, the markets are uniform price auctions. The proposed alternative explicitly accounts for the market-clearing price during the allocation phase. We find that the proposed alternative largely outperforms the current practice on the basis of procurement costs in the context of simple auction markets featuring both day-ahead and real-time auctions and that the procurement cost advantage of the alternative is complete when we simulate the effects of increased competition. We also find that a tradeoff between the objectives of procurement cost minimization and productive efficiency emerges in our simple auction markets and persists in the face of increased competition. The study in Chapter 2 considers a possible rationale for an auction with a buy price. In an auction with a buy price, the seller provides bidders with an option to end the auction early by accepting a transaction at a posted price. The "Buy-It-Now" option on eBay is a leading example of an auction with a buy price. The study develops a model of an auction with a buy price in which bidders use the auction's reserve price and buy price to formulate a reference price. The model both explains why a revenue-maximizing seller would want to augment her auction with a buy price and demonstrates that the seller sets a higher reserve price when she can affect the bidders' reference price through the auction's reserve price and buy price than when she can affect the bidders' reference price through the auction's reserve price only. Introducing a small reference-price effect can shrink the range of buy prices bidders are willing to exercise. The comparative statics properties of bidding behavior are in sharp contrast to equilibrium behavior in other models where the existence and size of the auction's buy price have no effect on bidding behavior. The study in Chapter 3 investigates endogenous entry in multi-unit auctions. We formulate and study models of multi-unit discriminatory and uniform price auctions and investigate the entry incentives and procurement costs they generate in equilibrium. We study two types of endogenous entry: in auctions with "interim entry costs," suppliers know their private cost information before deciding whether or not to undertake entry; in auctions with ex ante entry costs, suppliers do not know their private cost information before deciding whether or not to enter. The discriminatory and uniform price auctions are efficient and procurement cost equivalent in all the environments we study. With interim entry costs, the two auctions provide identical entry incentives. In contrast, with ex ante entry costs, suppliers enter the discriminatory auction at a higher rate than they enter the uniform price auction.

  12. 22 CFR 124.3 - Exports of technical data in furtherance of an agreement.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... approved in writing by the Directorate of Defense Trade Controls (DDTC) and the technical data does not... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Exports of technical data in furtherance of an... REGULATIONS AGREEMENTS, OFF-SHORE PROCUREMENT AND OTHER DEFENSE SERVICES § 124.3 Exports of technical data in...

  13. 76 FR 19766 - California Independent System Operator Corporation; Notice of Technical Conference

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-08

    ...) Capacity Procurement Mechanism (CPM) and exceptional dispatch mitigation provisions.\\1\\ Take notice that... (2011). The purpose of the technical conference is to discuss the issues raised by CAISO's proposed CPM...

  14. 40 CFR 35.4215 - What if my group can't find an adequate number of potential sources for a technical advisor or...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... number of potential sources for a technical advisor or other contractor? 35.4215 Section 35.4215... ASSISTANCE Grants for Technical Assistance Procuring A Technical Advisor Or Other Contractor with Tag Funds § 35.4215 What if my group can't find an adequate number of potential sources for a technical advisor...

  15. Optimal Operation and Value Evaluation of Pumped Storage Power Plants Considering Spot Market Trading and Uncertainty of Bilateral Demand

    NASA Astrophysics Data System (ADS)

    Takahashi, Kenta; Hara, Ryoichi; Kita, Hiroyuki; Hasegawa, Jun

    In recent years, as the deregulation in electric power industry has advanced in many countries, a spot market trading of electricity has been done. Generation companies are allowed to purchase the electricity through the electric power market and supply electric power for their bilateral customers. Under this circumstance, it is important for the generation companies to procure the required electricity with cheaper cost to increase their profit. The market price is volatile since it is determined by bidding between buyer and seller. The pumped storage power plant, one of the storage facilities is promising against such volatile market price since it can produce a profit by purchasing electricity with lower-price and selling it with higher-price. This paper discusses the optimal operation of the pumped storage power plants considering bidding strategy to an uncertain spot market. The volatilities in market price and demand are represented by the Vasicek model in our estimation. This paper also discusses the allocation of operational reserve to the pumped storage power plant.

  16. 14 CFR § 1271.300 - Professional and technical services.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... discipline. For example, drafting or a legal document accompanying a bid or proposal by a lawyer is allowable... influence made by an engineer providing an engineering analysis prior to the preparation or submission of a...

  17. Synthesis on construction unit cost development : technical report.

    DOT National Transportation Integrated Search

    2009-01-01

    Availability of historical unit cost data is an important factor in developing accurate project cost estimates. : State highway agencies (SHAs) collect data on historical bids and/or production rates, crew sizes and mixes, : material costs, and equip...

  18. 10 CFR 600.144 - Procurement procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... integrity, record of past performance, financial and technical resources or accessibility to other necessary... DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS FINANCIAL ASSISTANCE RULES Uniform Administrative... practicable, of technical requirements in terms of functions to be performed or performance required...

  19. Southeast Asia Report.

    DTIC Science & Technology

    1985-03-20

    views or attitudes of the U.S. Government. PROCUREMENT OF PUBLICATIONS JPIRS publications may be ordered from the National Technical Information...Washington, D.C. 20402. Correspondence pertaining to matters other than procurement may be addressed to Joint Publications Research Service, 1000 North Glebe...capital in Indonesia. Besides making jobs for Indonesians, such investment will afford opportunities to businesses without wood processing operations

  20. Latin America Report.

    DTIC Science & Technology

    1986-11-05

    or attitudes of the U.S. Government. PROCUREMENT OF PUBLICATIONS JPRS publications may be ordered from the National Technical Information Service...Washington, D.C. 20402. Correspondence pertaining to matters other than procurement may be addressed to Joint Publications Research Service, 1000 North... businesses ), imports, the assimilation and exportation of technology, exploring the possibilities for cooperation in the functions that are intrinsic to

  1. A Three Stage Multi-attribute Procurement Auction: A Proposal for Department of Defense (DoD) Vendor Selection Decisions.

    DTIC Science & Technology

    2010-04-30

    regarding production capabilities and costs, but must somehow form beliefs about the likelihood of a bid being accepted. We facilitate formulation...which both vendors believe the buyer places equal weight on the two attributes, but the vendors differ in their capabilities of producing those...exchange—the future of B2B . Harvard Business Review, 78(6), 86-96. = ^Åèìáëáíáçå=oÉëÉ~êÅÜ=mêçÖê~ã= do^ar^qb=p`elli=lc=_rpfkbpp=C=mr_if`=mlif`v= 444= k^s^i

  2. New Methodology for Evaluating Optimal Pricing for Primary Regulation of Deregulated Power Systems under Steady State Condition

    NASA Astrophysics Data System (ADS)

    Satyaramesh, P. V.; RadhaKrishna, C.

    2013-06-01

    A generalized pricing structure for procurement of power under frequency ancillary service is developed in this paper. It is a frequency linked-price model and suitable for deregulation market environment. This model takes into consideration: governor characteristics and frequency characteristics of generator as additional parameters in load flow method. The main objective of the new approach proposed in this paper is to establish bidding price structure for frequency regulation services in competitive ancillary electrical markets under steady state condition. Lot of literatures are available for calculating the frequency deviations with respect to load changes by using dynamic simulation methods. But in this paper, the model computes the frequency deviations for additional requirements of power under steady state with considering power system network topology. An attempt is also made in this paper to develop optimal bidding price structure for the frequency-regulated systems. It gives a signal to traders or bidders that the power demand can be assessed more accurately much closer to real time and helps participants bid more accurate quantities on day-ahead market. The recent trends of frequency linked-price model existing in Indian power systems issues required for attention are also dealt in this paper. Test calculations have been performed on 30-bus system. The paper also explains adoptability of 33 this model to practical Indian power system. The results presented are analyzed and useful conclusions are drawn.

  3. Construction cost forecast model : model documentation and technical notes.

    DOT National Transportation Integrated Search

    2013-05-01

    Construction cost indices are generally estimated with Laspeyres, Paasche, or Fisher indices that allow changes : in the quantities of construction bid items, as well as changes in price to change the cost indices of those items. : These cost indices...

  4. User-Side Subsidies for Fixed Route Transit in Danville, Illinois : Phase 2.

    DOT National Transportation Integrated Search

    1978-08-01

    This report presents the technical portion of an Evaluation Plan for the Danville, Illinois User-side Subsidy for Fixed-Route Transit demonstration project. Uner the project, the City of Danville will initiate competitive bidding processes for short-...

  5. Technical and Economic Aspects of Designing an Efficient Room Air-Conditioner Program in India

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Abhyankar, Nikit; Shah, Nihar; Phadke, Amol

    Several studies have projected a massive increase in the demand for air conditioners (ACs) over the next two decades in India. By 2030, room ACs could add 140 GW to the peak load, equivalent to over 30% of the total projected peak load. Therefore, there is significant interest among policymakers, regulators, and utilities in managing room AC demand by enhancing energy efficiency. Building on the historical success of the Indian Bureau of Energy Efficiency’s star-labeling program, Energy Efficiency Services Limited recently announced a program to accelerate the sale of efficient room ACs using bulk procurement, similar to their successful UJALAmore » light-emitting diode (LED) bulk procurement program. This report discusses some of the key considerations in designing a bulk procurement or financial incentive program for enhancing room AC efficiency in India. We draw upon our previous research to demonstrate the overall technical potential and price impact of room AC efficiency improvement and its technical feasibility in India. We also discuss the importance of using low global warming potential (GWP) refrigerants and smart AC equipment that is demand response (DR) ready.« less

  6. Near East/South Asia Report.

    DTIC Science & Technology

    1985-10-04

    Government. PROCUREMENT OF PUBLICATIONS JPRS publications may be ordered from the National Technical Information Service, Springfield, Virginia 22161. In...Correspondence pertaining to niatters other than procurement may be addressed to Joint Publications Research Service, 1000 North Glebe Road, Arlington, Virginia... solution " to the Jewish problem. The time, the place, and other circumstances may have made equally methodical execution of that plan impossible. But

  7. Southeast Asia Report

    DTIC Science & Technology

    1987-04-21

    PROCUREMENT OF PUBLICATIONS JPRS publications may be ordered from the National Technical Information Service, Springfield, Virginia 22161. In order- ing, it...to matters other than procurement may be addressed to Joint Publications Research Service, 1000 North Glebe Road, Arlington, Virginia 22201. JPRS...Denies Graft Charges (Oscar M. Quiambao; PHILIPPINE DAILY INQUIRER, 31 Mar 87) 36 Banks’ Reserve Deficiency Declines ( BUSINESS DAY, 1 Apr 87

  8. Translations on USSR Military Affairs, Number 1261

    DTIC Science & Technology

    1977-02-16

    committee directors down to the sports shooters themselves in the process of the business like discussion worked out specific solutions aimed at...poli- cies, views or attitudes of the U.S. Government. PROCUREMENT OF PUBLICATIONS JPRS publications may be ordered from the National Technical...Old Mansfield Road, Wooster, Ohio, 44691. Correspondence pertaining to matters other than procurement may be addressed to Joint Publications

  9. East Europe Report, Political, Sociological and Military Affairs, No. 2199.

    DTIC Science & Technology

    1983-09-15

    PROCUREMENT OF PUBLICATIONS JPRS publications may be ordered from the National Technical Information Service, Springfield, Virginia 22161. In order...pertaining to matters other than procurement may be addressed to Joint Publications Research Service, 1000 North Glebe Road, Arlington, Virginia 22201...Political Activities New Solutions Sought, by Ryszard Buczek Party Serves People in Plants, by Krystyna Majda Provincial Trade Union Developments

  10. Computerized engineering logic for nuclear procurement and dedication processes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tulay, M.P.

    1996-12-31

    In an attempt to better meet the needs of operations and maintenance organizations, many nuclear utility procurement engineering groups have simplified their procedures, developed on-line tools for performing the specification of replacement items, and developed relational databases containing part-level information necessary to automate the procurement process. Although these improvements have helped to reduce the engineering necessary to properly specify and accept/dedicate items for nuclear safety-related applications, a number of utilities have recognized that additional long-term savings can be realized by integrating a computerized logic to assist technical procurement engineering personnel. The most commonly used logic follows the generic processes containedmore » in Electric Power Research Institute (EPRI) published guidelines. The processes are typically customized to some extent to accommodate each utility`s organizational structure, operating procedures, and strategic goals. This paper will discuss a typical logic that integrates the technical evaluation, acceptance, and receipt inspection and testing processes. The logic this paper will describe has been successfully integrated at a growing number of nuclear utilities and has produced numerous positive results. The application of the logic ensures that utility-wide standards or procedures, common among multi-site utilities, are followed.« less

  11. Outsourcing's Potential in Higher Education.

    ERIC Educational Resources Information Center

    Robinson, Robert J.

    1991-01-01

    Reasons why institutions of higher education might choose to acquire computer services from off-campus suppliers are identified and include the difficulty of maintaining a qualified technical systems group. The importance of careful management oversight from contract bidding to ongoing performance monitoring is stressed. (DB)

  12. 48 CFR 14.201-6 - Solicitation provisions.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ...-21, Descriptive Literature, in invitations for bids if (i) descriptive literature is required to evaluate the technical acceptability of an offered product and (ii) the required information will not be... possibility exists that the contracting officer may waive the requirement for furnishing descriptive...

  13. 48 CFR 14.201-6 - Solicitation provisions.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...-21, Descriptive Literature, in invitations for bids if (i) descriptive literature is required to evaluate the technical acceptability of an offered product and (ii) the required information will not be... possibility exists that the contracting officer may waive the requirement for furnishing descriptive...

  14. 48 CFR 14.201-6 - Solicitation provisions.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ...-21, Descriptive Literature, in invitations for bids if (i) descriptive literature is required to evaluate the technical acceptability of an offered product and (ii) the required information will not be... possibility exists that the contracting officer may waive the requirement for furnishing descriptive...

  15. 48 CFR 14.201-6 - Solicitation provisions.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...-21, Descriptive Literature, in invitations for bids if (i) descriptive literature is required to evaluate the technical acceptability of an offered product and (ii) the required information will not be... possibility exists that the contracting officer may waive the requirement for furnishing descriptive...

  16. 48 CFR 14.201-6 - Solicitation provisions.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ...-21, Descriptive Literature, in invitations for bids if (i) descriptive literature is required to evaluate the technical acceptability of an offered product and (ii) the required information will not be... possibility exists that the contracting officer may waive the requirement for furnishing descriptive...

  17. Computerized engineering logic for procurement and dedication processes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tulay, M.P.

    1996-12-31

    This paper summarizes the work performed for designing the system and especially for calculating on-line expected performance and gives some significant results. In an attempt to better meet the needs of operations and maintenance organizations, many nuclear utility procurement engineering groups have simplified their procedures, developed on-line tools for performing the specification of replacement items, and developed relational databases containing part-level information necessary to automate the procurement process. Although these improvements have helped to reduce the engineering necessary to properly specify and accept/dedicate items for nuclear safety-related applications, a number of utilities have recognized that additional long-term savings can bemore » realized by integrating a computerized logic to assist technical procurement engineering personnel.« less

  18. 14 CFR 1260.71 - Supplements and renewals.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ..., continued research relevance, and progress made by the recipient. (2) To insure uninterrupted programs, the technical office should forward to the grant office a completed award package, including a funded procurement request, technical evaluation of the proposed budget, and other support documentation, at least 29...

  19. Acquiring Technical Data With Renewable Real Options

    DTIC Science & Technology

    2016-04-30

    Development, and Engineering Center, 2009). Faced with diminishing sources for M2 .50 caliber machine gun parts , an Army engineering center entered the...data needed for life cycle sustainment functions such as maintenance or competitive spare parts procurement, but this expectation is more complicated...than it seems (DoD, 2015). The needs and timing for competitive spare parts procurement are uncertain, and changes in system configuration or

  20. Issues With Access to Acquisition Data and Information in the Department of Defense

    DTIC Science & Technology

    2017-01-01

    both procurement and operations), technical performance, contracts and contractor performance, and program decision memo- randa. These data are...the cost of weapon systems (both procurement and operations), techni- cal performance, contracts and contractor performance, and program decision...and tracking sensitive data, and 19 percent have no method at all (Trustwave, 2014, p. 4; Kerner, 2014). U.S. defense contractors face similar

  1. The Vendors' Corner--The Request for Proposal.

    ERIC Educational Resources Information Center

    Sugnet, Chris; And Others

    1987-01-01

    Several online vendors address the issue of RFPs (requests for proposals) for library systems, discussing the documents' style, technical standards, library expectations, liabilities associated with using this procedure, factors in the decision to bid, and the need for a standardized document and national clearinghouse. (CLB)

  2. Considerations for rigid vs. flexible pavement designs when allowed as alternate bids : technical report.

    DOT National Transportation Integrated Search

    2009-08-01

    This report documents the research conducted for the Texas Department of Transportation (TxDOT) : concerning the use of pavement alternates. The scope of the project includes reviewing the state-of-thepractice : in methods used for pavement type sele...

  3. Benchmarking organ procurement organizations: a national study.

    PubMed Central

    Ozcan, Y A; Begun, J W; McKinney, M M

    1999-01-01

    OBJECTIVE: An exploratory examination of the technical efficiency of organ procurement organizations (OPOs) relative to optimal patterns of production in the population of OPOs in the United States. DATA SOURCES: A composite data set with the OPO as the unit of analysis, constructed from a 1995 national survey of OPOs (n = 64), plus secondary data from the Association of Organ Procurement Organizations and the United Network for Organ Sharing. STUDY DESIGN: The study uses data envelopment analysis (DEA) to evaluate the technical efficiency of all OPOs. PRINCIPAL FINDINGS: Overall, six of the 22 larger OPOs (27 percent) are classified as inefficient, while 23 of the 42 smaller OPOs (55 percent) are classified as inefficient. Efficient OPOs recover significantly more kidneys and extrarenal organs; have higher operating expenses; and have more referrals, donors, extrarenal transplants, and kidney transplants. The quantities of hospital development personnel and other personnel, and formalization of hospital development activities in both small and large OPOs, do not significantly differ. CONCLUSIONS: Indications that larger OPOs are able to operate more efficiently relative to their peers suggest that smaller OPOs are more likely to benefit from technical assistance. More detailed information on the activities of OPO staff would help pinpoint activities that can increase OPO efficiency and referrals, and potentially improve outcomes for large numbers of patients awaiting transplants. PMID:10536974

  4. 78 FR 36083 - Small Business Size Standards; Educational Services; Correction

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-17

    ... industries and the Job Corps Centers exception under NAICS 611519, Other Technical and Trade Schools, within.... List of Subjects in 13 CFR Part 121 Administrative practice and procedure, Government procurement... * * * * * * * 611519 Other Technical and Trade Schools. $14.0 Except, Job Corps Centers \\16\\ \\16\\ 35.5...

  5. 40 CFR 35.4235 - Are there specific provisions my group's contract(s) must contain?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Technical Assistance Procuring A Technical Advisor Or Other Contractor with Tag Funds § 35.4235 Are there specific... progress reports; (3) Expenditures; and (4) Commitments indicating their relationship to established costs...

  6. NASA STI Program Coordinating Council Twelfth Meeting: Standards

    NASA Technical Reports Server (NTRS)

    1994-01-01

    The theme of this NASA Scientific and Technical Information Program Coordinating Council Meeting was standards and their formation and application. Topics covered included scientific and technical information architecture, the Open Systems Interconnection Transmission Control Protocol/Internet Protocol, Machine-Readable Cataloging (MARC) open system environment procurement, and the Government Information Locator Service.

  7. Vietnam Report, Number 2393, Tap Chi Cong San, Number 6, June 1982.

    DTIC Science & Technology

    1982-09-14

    PROCUREMENT OF PUBLICATIONS JPRS publications may be ordered from the National Technical Information Service, Springfield, Virginia 22161. In order- ing, it...to matters other than procurement may be addressed to Joint Publications Research Service, 1000 North Glebe Road, Arlington, Virginia 22201. JPRS...concentrate all efforts on preventing the other side from making a wrong move, thereby formulating a constructive solution to the replacement of the arms

  8. Translations on Eastern Europe, Political, Sociological, and Military Affairs, Number 1460

    DTIC Science & Technology

    1977-10-14

    attitudes of the U.S. Government. PROCUREMENT OF PUBLICATIONS JPRS publications may be ordered from the National Technical Information Service...Wooster, Ohio, 44691. Correspondence pertaining to matters other than procurement may be addressed to Joint Publications Research Service, 1000 North...exper- ience of the struggle of the Albanian poeple and we reaffirm that the People’s Socialist Republic of Albania remains for all people fighting in

  9. LPTA Versus Tradeoff: Analysis of Contract Source Selection Strategies and Performance Outcomes

    DTIC Science & Technology

    2016-06-01

    methodologies contracting professionals employ to acquire what the DOD needs. Contracting professionals may use lowest price technically acceptable (LPTA) and...contract management process, source selection, lowest price technically acceptable, tradeoff 15. NUMBER OF PAGES 69 16. PRICE CODE 17. SECURITY...use lowest price technically acceptable (LPTA) and tradeoff strategies to procure requirements to maximize the overall best value to the government

  10. War-gaming application for future space systems acquisition part 2: acquisition and bidding war-gaming modeling and simulation approaches for FFP and FPIF

    NASA Astrophysics Data System (ADS)

    Nguyen, Tien M.; Guillen, Andy T.

    2017-05-01

    This paper describes cooperative and non-cooperative static Bayesian game models with complete and incomplete information for the development of optimum acquisition strategies associated with the Program and Technical Baseline (PTB) solutions obtained from Part 1 of this paper [1]. The optimum acquisition strategies discussed focus on achieving "Affordability" by incorporating contractors' bidding strategies into the government acquisition strategies for acquiring future space systems. The paper discusses System Engineering (SE) frameworks, analytical and simulation approaches and modeling for developing the optimum acquisition strategies from both the government and contractor perspectives for Firm Fixed Price (FFP) and Fixed Price Incentive Firm (FPIF) contract types.

  11. 14 CFR 1274.505 - Procurement procedures.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... performance, financial and technical resources or accessibility to other necessary resources. In certain... or performance required, including the range of acceptable characteristics or minimum acceptable...

  12. E-Procurement, from Project to Practice: Empirical Evidence from the French Public Sector

    NASA Astrophysics Data System (ADS)

    Beauvallet, Godefroy; Boughzala, Younès; Assar, Saïd

    Public procurement constitutes a significant portion of national PIB in all countries and electronic platforms for supporting public transactions are an important application of e-government. In France, new regulations since 2005 are pushing public and private actors to adopt electronic means for handling all steps of the purchase process in public organisations. Based on quantitative and qualitative surveys made between 2005 and 2008, this chapter presents the general topic of e-procurement and specifically discusses the problem of e-procurement adoption in public institutions in France. The conclusions of these investigations spanning a three years period, are that public e-procurement is constantly progressing, although difficulties related to insufficient technical skills and the complexity of the juridical context hinder seriously its full adoption. They also show that a digital and an organisational divide is appearing between big administrations which have the adequate resources and skills to fully adopt e-procurement, and small administration (i.e. local authorities) which are still reluctant or unable to conduct a purchase in a digital manner.

  13. USSR Report, Political and Sociological Affairs, Peoples of Asia and Africa, No. 2, Mar - Apr 1985.

    DTIC Science & Technology

    1985-08-30

    U.S. Government, PROCUREMENT OF PUBLICATIONS JPRS publications may be ordered from the National Technical Information Service (NTIS), Springfield...matters other than procurement may be addressed to Joint Publications Research Service, 1000 North Glebe Road, Arlington, Virginia 22201. Soviet...sine qua non of the successful solution of their problems. PERSIAN GULF IN POLICIES OF IMPERIALIST POWERS V.V. Mashin, A.I. Yakovlev The article

  14. Solution-Space Screening of a Hypersonic Endurance Demonstrator

    NASA Technical Reports Server (NTRS)

    Chudoba, Bernd; Coleman, Gary; Oza, Amit; Gonzalez, Lex; Czysz, Paul

    2012-01-01

    This report documents a parametric sizing study performed to develop a program strategy for research and development and procurement of a feasible next-generation hypersonic air-breathing endurance demonstrator. Overall project focus has been on complementing technical and managerial decision-making during the earliest conceptual design phase towards minimization of operational, technical, and managerial risks.

  15. 48 CFR 19.403 - Small Business Administration breakout procurement center representatives.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... center, technical data necessary for the preparation of a competitive solicitation package for any item... availability and access to data needed for the preparation of offers to sell to the United States those... arising out of restrictions on the rights of the United States in technical data and, when appropriate...

  16. 26 CFR 1.971-1 - Definitions with respect to export trade corporations.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... agricultural products grown in the United States. (4) Determination of sources of gross income. The sources of..., engineering, architectural, skilled, or other services in respect of a sale by such corporation in a... engineering, technical, and financial studies required by N Corporation in the preparation of bids to supply...

  17. 26 CFR 1.971-1 - Definitions with respect to export trade corporations.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... agricultural products grown in the United States. (4) Determination of sources of gross income. The sources of..., engineering, architectural, skilled, or other services in respect of a sale by such corporation in a... engineering, technical, and financial studies required by N Corporation in the preparation of bids to supply...

  18. 26 CFR 1.971-1 - Definitions with respect to export trade corporations.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... agricultural products grown in the United States. (4) Determination of sources of gross income. The sources of..., engineering, architectural, skilled, or other services in respect of a sale by such corporation in a... engineering, technical, and financial studies required by N Corporation in the preparation of bids to supply...

  19. Maryland's Library Public Awareness Campaign for CTE

    ERIC Educational Resources Information Center

    Gilli, Lynne M.; Lohnes, Marjorie R.

    2011-01-01

    Career and technical education (CTE) has grown and changed tremendously over the past 20 years. While great strides have been made in upgrading CTE in Maryland, many parents, students, policymakers and community members were not familiar with the "new and improved" CTE. In a bid to spread the word about the "new and improved"…

  20. 20 CFR 435.44 - Procurement procedures.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... must be given to such matters as contractor integrity, record of past performance, financial and..., whenever practicable, of technical requirements in terms of functions to be performed or performance...

  1. 49 CFR 19.44 - Procurement procedures.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    .... Consideration shall be given to such matters as contractor integrity, record of past performance, financial and..., whenever practicable, of technical requirements in terms of functions to be performed or performance...

  2. 22 CFR 518.44 - Procurement procedures.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    .... Consideration shall be given to such matters as contractor integrity, record of past performance, financial and..., whenever practicable, of technical requirements in terms or functions to be performed or performance...

  3. NASA Aerospace Flight Battery Program: Recommendations for Technical Requirements for Inclusion in Aerospace Battery Procurements. Volume 1, Part 2

    NASA Technical Reports Server (NTRS)

    Jung, David S.; Manzo, Michelle A.

    2010-01-01

    This NASA Aerospace Flight Battery Systems Working Group was chartered within the NASA Engineering and Safety Center (NESC). The Battery Working Group was tasked to complete tasks and to propose proactive work to address battery related, agency-wide issues on an annual basis. In its first year of operation, this proactive program addressed various aspects of the validation and verification of aerospace battery systems for NASA missions. Studies were performed, issues were discussed and in many cases, test programs were executed to generate recommendations and guidelines to reduce risk associated with various aspects of implementing battery technology in the aerospace industry. This document contains Part 2 - Volume I: Recommendations for Technical Requirements for Inclusion in Aerospace Battery Procurements of the program's operations.

  4. Assessing bone banking activities at University of Malaya medical centre.

    PubMed

    Mohd, Suhaili; Samsuddin, Sharifah Mazni; Ramalingam, Saravana; Min, Ng Wuey; Yusof, Norimah; Zaman, T Kamarul; Mansor, Azura

    2015-12-01

    The main advantage of establishing in-house bone banks is its ability to readily provide allograft bones for local surgeries. Bone procurement activities of our university bone bank during the 10 years of operation were reviewed. Socio-demographic data of donors, types of bone procured, cases of rejected bones and types of allograft bones transplanted are presented. From 179 potential donors, 73 % were accepted with 213 procured bones. Femoral head was the common bone transplanted (45 %), as it was also the most common procured (82 %). Bones were rejected mainly due to non-technical reasons (83 %) rather than positive results of microbiological (13 %) and serological (4 %) tests. Comprehensive data could not be obtained for further analysis due to difficulties in retrieving information. Therefore, quality assurance system was improved to establish more systematic documentations, as the basis of good banking practice with process control hence allowing traceability.

  5. The new millennium program: Fast-track procurements

    NASA Astrophysics Data System (ADS)

    Metzger, Robert M.

    1996-11-01

    The National Aeronautics and Space Administration's (NASA's) New Millennium Program (NMP) has embarked on a technology flight-validation demonstration program to enable the kinds of missions that NASA envisions for the 21st century. Embedded in this program is the concept of rapid mission development supported by a fast-track procurement process. This process begins with the decision to initiate a procurement very early in the program along with the formation of a technical acquisition team. A close working relationship among the team members is essential to avoiding delays and developing a clear acquisition plan. The request for proposal (RFP) that is subsequently issued seeks a company with proven capabilities, so that the time allotted for responses from proposers and the length of proposals they submit can be shortened. The fast-track procurement process has been demonstrated during selection of NMP's industrial partners and has been proven to work.

  6. 78 FR 21850 - Defense Federal Acquisition Regulation Supplement; Technical Amendments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-04-12

    ... Parts 215, 235, and 237 Government procurement. Manuel Quinones, Editor, Defense Acquisition Regulations...-79 for notifying affected incumbent contractors of Government in-sourcing actions, in accordance with...

  7. Sandia National Laboratories: Business Opportunities Website

    Science.gov Websites

    Does Sandia Buy? Opportunities Small Business Procurement Technical Assistance Program (PTAP) Current Prospective Suppliers What Sandia Looks For In Our Suppliers What Does Sandia Buy? Business Opportunities

  8. Bidding cost evaluation with fuzzy methods on building project in Jakarta

    NASA Astrophysics Data System (ADS)

    Susetyo, Budi; Utami, Tin Budi

    2017-11-01

    National construction companies today demanded to become more competitive to face increasingly competition. Every construction company especially the contractor must work better than ever. Ability to prepare cost of the work that represents the efficiency and effectiveness of the implementation of the work necessary to produce cost - competitive. The project is considered successful if the target meets the quality, cost and time. From the aspect of cost, the project has been designed in accordance with certain technical criteria to be taken into account based on standard costs. To ensure the cost efficiency of the bidding process carried out meet the rules of a fairly and competitive. The research objective is to formulate the proper way to compare several deals with the standard cost of the work. The fuzzy technique is used as a evaluation methods to decision making. The evaluation not merely based on the lowest prices. The methods is looking for the most valuable and reasonable prices. The comparison is conducted to determine the most cost-competitive and reasonable as the winner of the bidding.

  9. But I'm an engineer—not a contracts lawyer!

    NASA Astrophysics Data System (ADS)

    Warner, Mark; Bass, Harvey

    2012-09-01

    Industrial partners, commercial vendors, and subsystem contractors play a large role in the design and construction of modern telescopes. Because many telescope projects carry relatively small staffs, engineers are often required to perform the additional functions of technical writing, cost estimating, and contract bidding and negotiating. The skills required to carry out these tasks are not normally taught in traditional engineering programs. As a result, engineers often learn to write Request for Proposals (RFPs), select vendors, and negotiate contracts by trial-and-error and/or by adapting previous project documents to match their own requirements. Typically, this means that at the end of a contract the engineer has a large list of do's, don'ts, and lessons learned for the next RFP he or she must generate. This paper will present one such engineer's experience writing and bidding proposal packages for large telescope components and subsystems. Included are: thoughts on structuring SOWs, Specs, ICDs, and other RFP documents; modern methods for bidding the work; and systematic means for selecting and negotiating with a contractor to arrive at the best value for the project.

  10. Comparing the Effectiveness of Two KC-10 Concepts of Operation - An Examination of Tanker/Airlift Support in a Fighter Deployment to Europe

    DTIC Science & Technology

    1986-06-01

    PROCUREMENT INSTRUMENT IDENTIFICATION NUMBER ORGANIZATION (Ii’ ppticable) Sc. ADDRESS (City, State and ZIP Code) 10. SOURCE OF FUNDING NOS...total of 60 KC-10s were available to support the fighter deployment. This number represented the projected KC-10 procurement for the year 1990 as...search for relevant government studies was accomplished through the Defense Technical Information Center (DTIC). All their 3-9 research related to

  11. 78 FR 13768 - Federal Acquisition Regulation; Technical Amendments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-28

    ... FAR. List of Subject in 48 CFR Parts 5, 7, 10, and 52 Government procurement. Dated: February 20, 2013... Foreign Governments. * * * * * Taxes--Fixed--Price Contracts With Foreign Governments (Feb 2013...

  12. Technical Specifications for Hardware and Software, and Maintenance in Support of Computer Literacy Program. Volume II.

    ERIC Educational Resources Information Center

    District of Columbia Public Schools, Washington, DC.

    Designed for use by vendors, this guide provides an overview of the objectives for the 5-year computer literacy program to be implemented in the District of Columbia Public Schools; outlines requirements which are mandatory elements of vendors' bids unless explicitly designated "desirable"; and details specifications for computing…

  13. 48 CFR 252.205-7000 - Provision of information to cooperative agreement holders.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... has an agreement with the Defense Logistics Agency to furnish procurement technical assistance to... defense contracts. The list shall include the business address, telephone number, and area of...

  14. 48 CFR 252.205-7000 - Provision of information to cooperative agreement holders.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... has an agreement with the Defense Logistics Agency to furnish procurement technical assistance to... defense contracts. The list shall include the business address, telephone number, and area of...

  15. 48 CFR 252.205-7000 - Provision of information to cooperative agreement holders.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... has an agreement with the Defense Logistics Agency to furnish procurement technical assistance to... defense contracts. The list shall include the business address, telephone number, and area of...

  16. 48 CFR 252.205-7000 - Provision of information to cooperative agreement holders.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... has an agreement with the Defense Logistics Agency to furnish procurement technical assistance to... defense contracts. The list shall include the business address, telephone number, and area of...

  17. 48 CFR 252.205-7000 - Provision of information to cooperative agreement holders.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... has an agreement with the Defense Logistics Agency to furnish procurement technical assistance to... defense contracts. The list shall include the business address, telephone number, and area of...

  18. Tallgrass Prairie National Preserve Vehicle Decision Document.

    DOT National Transportation Integrated Search

    2004-07-31

    This document serves as technical substantiation in support of a procurement for a vehicle to : be used to operate an interpretive bus tour at Tallgrass Prairie National Preserve (TAPR), : located just north of Strong City, Kansas.

  19. Is the Job Training Partnership Act Training Displaced Homemakers? A Technical Report on Services to Displaced Homemakers under JTPA.

    ERIC Educational Resources Information Center

    Spero, Abby

    The Displaced Homemakers Network surveyed its 425 programs in the winter of 1985 to determine the extent and nature of services to displaced homemakers under the Job Training Partnership Act (JTPA). Also sought was information about the barriers to JTPA that kept program operators from bidding successfully for contracts. Finally, the survey…

  20. Critical concerns, solutions and guidelines for use of plastic encapsulated microcircuits for space flight applications

    NASA Technical Reports Server (NTRS)

    Virmani, Nick; Shaw, Jack

    1997-01-01

    Some of the concerns and risk mitigation procedures for using plastic encapsulated microcircuits (PEMs) for space applications are discussed. Despite their advantages, PEMs cannot be implemented in all space applications by replacing military parts numbers with their commercial counterparts in product designs and part lists. The technical and procurement concerns are summarized, and suggestions for high reliability procurements are given. The ability to withstand deleterious environmental effects and to meet mission critical reliability is the key to the successful use of PEMs for space applications.

  1. [Development of a service on line advice and information technology management for health].

    PubMed

    Berrospi Polo, Victor; Rodriguez Abad, Juan; Bobadilla Aguilar, Juan; Di Liberto Moreno, Carlos; Díaz Arroyo, Cecilia; Rafael Quipan, Carlos

    2015-10-01

    To validate an advisory service and online information technology management for health and helps to make assessment and acquisition processes an informed medical equipment according to the market and the needs of the health institutions. Internet via a technological solution supported ona data base containing systematic and updated information on technical specifications of 25 compared medical equipment, the same reference prices, list of suppliers, agents and / or producers and technical standards are developed. The"virtual" technical assistance was made with the support of a team of specialists in Health Technology Management, the decision makers in the planning, evaluation and procurement of biomedical equipment. The validation of the service was conducted by involving specialists in the field of Health Technology Management, from different disciplines and institutions who worked in health, public and private. They used the service for a period of time to verify its feasibility of use as well as its usefulness for their planning, evaluation and procurement of biomedical equipment. To these experts we applied a survey before and after them about the software developed in this project. We found that it is common to use the internet to search for information on medical equipment.Also,an increase on the view that the application will help in procurement of biomedical equipment(40% to 78%) was observed, it will improve the information system(40% to 89%) and communication among physicians,nurses, planners, engineers and other professionals involved in this process(20% to 78%). There is a need for a technological tool available with such features contribute to technology management in Peru.

  2. Lung Transplantation From Donors After Previous Cardiac Surgery: Ideal Graft in Marginal Donor?

    PubMed

    Palleschi, A; Mendogni, P; Tosi, D; Montoli, M; Carrinola, R; Mariolo, A V; Briganti, F; Nosotti, M

    2017-05-01

    Lung transplantation is a limited by donor pool shortage. Despite the efforts to extend the graft acceptability with recurrent donor criteria reformulations, previous cardiothoracic surgery is still considered a contraindication. A donor who underwent cardiac surgery could potentially provide an ideal lung but high intraoperative risks and intrinsic technical challenges are expected during the graft harvesting. The purpose of this study is to present our dedicated protocol and four clinical cases of successful lung procurements from donors who had a previous major cardiac surgery. One donor had ascending aortic root (AAR) substitution, another had mitral valve substitution, and two had coronary artery bypass surgery. The others' eligibility criteria for organ allocation, such as ABO compatibility, PaO 2 /FiO 2 ratio, absence of aspiration, or sepsis were respected. In one of the cases with previous coronary bypass grafting, the donor had a veno-arterial extracorporeal membrane oxygenation support. Consequently, the grafts required an ex vivo lung perfusion evaluation. We report the technical details of procurement and postoperative courses of recipients. All procurements were uneventful, without lung damage or waste of abdominal organs related to catastrophic intraoperative events. All recipients had a successful clinical outcome. We believe that successful transplantation is achievable even in a complicated setting, such as cases involving donors with previous cardiac surgery frequently are. Facing lung donor shortage, we strongly support any effort to avoid the loss of possible acceptable lungs. In particular, previous major cardiac surgery does not strictly imply a poor quality of lungs as well as unsustainable graft procurement. Copyright © 2017 Elsevier Inc. All rights reserved.

  3. 77 FR 76936 - Defense Federal Acquisition Regulation Supplement; Technical Amendments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-31

    ...; List of Subjects in 48 CFR Parts 201, 203, 204, 215, 219, 245, and 252 Government procurement. Manuel... clause 52.203-13, Contractor Code of Business Ethics and Conduct, is the DoD Office of Inspector General...

  4. Light Rail Transit Car Specification Guide

    DOT National Transportation Integrated Search

    1981-12-01

    This Light Rail Transit Car Specification Guide is not a procurement document in itself. It is intended to be used as a guide by light rail transit operators and purchasers of such equipment in the preparation of technical specifications. Because of ...

  5. North Cascades Stehekin Valley Vehicle Decision Document.

    DOT National Transportation Integrated Search

    2007-08-31

    This document serves as technical substantiation in support of a procurement for a fleet of vehicles to be used to operate a scheduled shuttle operation with multiple stops at North Cascades National Park Service Complex (NOCA), in the Stehekin Valle...

  6. 77 FR 10976 - Defense Federal Acquisition Regulation Supplement; Technical Amendment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-02-24

    ... referenced in paragraphs (b)(4)(i) and (b)(6) of the clause. List of Subjects in 48 CFR Part 252 Government procurement. Ynette R. Shelkin, Editor, Defense Acquisition Regulations System. Therefore, 48 CFR part 252 is...

  7. Methods for medical device and equipment procurement and prioritization within low- and middle-income countries: findings of a systematic literature review.

    PubMed

    Diaconu, Karin; Chen, Yen-Fu; Cummins, Carole; Jimenez Moyao, Gabriela; Manaseki-Holland, Semira; Lilford, Richard

    2017-08-18

    Forty to 70 % of medical devices and equipment in low- and middle-income countries are broken, unused or unfit for purpose; this impairs service delivery to patients and results in lost resources. Undiscerning procurement processes are at the heart of this issue. We conducted a systematic review of the literature to August 2013 with no time or language restrictions to identify what product selection or prioritization methods are recommended or used for medical device and equipment procurement planning within low- and middle-income countries. We explore the factors/evidence-base proposed for consideration within such methods and identify prioritization criteria. We included 217 documents (corresponding to 250 texts) in the narrative synthesis. Of these 111 featured in the meta-summary. We identify experience and needs-based methods used to reach procurement decisions. Equipment costs (including maintenance) and health needs are the dominant issues considered. Extracted data suggest that procurement officials should prioritize devices with low- and middle-income country appropriate technical specifications - i.e. devices and equipment that can be used given available human resources, infrastructure and maintenance capacity. Suboptimal device use is directly linked to incomplete costing and inadequate consideration of maintenance services and user training during procurement planning. Accurate estimation of life-cycle costing and careful consideration of device servicing are of crucial importance.

  8. Rethinking health sector procurement as developmental linkages in East Africa.

    PubMed

    Mackintosh, Maureen; Tibandebage, Paula; Karimi Njeru, Mercy; Kariuki Kungu, Joan; Israel, Caroline; Mujinja, Phares G M

    2018-03-01

    Health care forms a large economic sector in all countries, and procurement of medicines and other essential commodities necessarily creates economic linkages between a country's health sector and local and international industrial development. These procurement processes may be positive or negative in their effects on populations' access to appropriate treatment and on local industrial development, yet procurement in low and middle income countries (LMICs) remains under-studied: generally analysed, when addressed at all, as a public sector technical and organisational challenge rather than a social and economic element of health system governance shaping its links to the wider economy. This article uses fieldwork in Tanzania and Kenya in 2012-15 to analyse procurement of essential medicines and supplies as a governance process for the health system and its industrial links, drawing on aspects of global value chain theory. We describe procurement work processes as experienced by front line staff in public, faith-based and private sectors, linking these experiences to wholesale funding sources and purchasing practices, and examining their implications for medicines access and for local industrial development within these East African countries. We show that in a context of poor access to reliable medicines, extensive reliance on private medicines purchase, and increasing globalisation of procurement systems, domestic linkages between health and industrial sectors have been weakened, especially in Tanzania. We argue in consequence for a more developmental perspective on health sector procurement design, including closer policy attention to strengthening vertical and horizontal relational working within local health-industry value chains, in the interests of both wider access to treatment and improved industrial development in Africa. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  9. Technical change in US industry: A cross-industry analysis

    NASA Technical Reports Server (NTRS)

    Nelson, R. R. (Editor)

    1981-01-01

    The nature of the public policies which have influenced the pace and pattern of technical progress in a number of American industries is studied with the view of assessing the broad effects of these policies. The industries studied are agriculture, pharmaceuticals, semiconductors, computers, civil aircraft, automobiles and residential construction. The policies considered include research and development funding as well as government procurement, education, information dissemination, patent protection, licensing, regulations, and anti-trust policies.

  10. Sandia National Laboratories: National Security Missions: International

    Science.gov Websites

    Transportation Energy Energy Research Global Security WMD Counterterrorism & Response Global Threat Reduction Homeland Defense & Force Protection Homeland Security Cyber & Infrastructure Security Global Business Procurement Technical Assistance Program (PTAP) Current Suppliers iSupplier Account Accounts

  11. 20 CFR 641.856 - What functions and activities constitute administrative costs?

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ..., including: (i) Accounting, budgeting, financial, and cash management functions; (ii) Procurement and... management, accounting, and payroll systems) including the purchase, systems development, and operating costs of such systems and; (6) Costs of technical assistance, professional organization membership dues...

  12. 20 CFR 641.856 - What functions and activities constitute administrative costs?

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ..., including: (i) Accounting, budgeting, financial, and cash management functions; (ii) Procurement and... management, accounting, and payroll systems) including the purchase, systems development, and operating costs of such systems and; (6) Costs of technical assistance, professional organization membership dues...

  13. 20 CFR 641.856 - What functions and activities constitute administrative costs?

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., including: (i) Accounting, budgeting, financial, and cash management functions; (ii) Procurement and... management, accounting, and payroll systems) including the purchase, systems development, and operating costs of such systems and; (6) Costs of technical assistance, professional organization membership dues...

  14. 20 CFR 641.856 - What functions and activities constitute administrative costs?

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ..., including: (i) Accounting, budgeting, financial, and cash management functions; (ii) Procurement and... management, accounting, and payroll systems) including the purchase, systems development, and operating costs of such systems and; (6) Costs of technical assistance, professional organization membership dues...

  15. 32 CFR 744.1 - Purpose.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Department of Defense (Continued) DEPARTMENT OF THE NAVY PROCUREMENT, PROPERTY, PATENTS, AND CONTRACTS... RELEASE TO FOREIGN GOVERNMENTS § 744.1 Purpose. This part implements part 264 of this title and the Technical Property Interchange Agreements between the United States and foreign governments which agreements...

  16. 32 CFR 203.3 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... for making environmental decisions for their component or the director of the Defense Agencies. DoD...-making process by improving the public's understanding of overall conditions and activities. Technical... communications with the Department of Defense regarding the TAPP procurement process. The community point of...

  17. IVHS Institutional Issues And Case Studies: Help/Cresent Case Study

    DOT National Transportation Integrated Search

    1997-04-01

    This report presents the results of research on procurement-related legal and non-technical issues which may be viewed as constraints to the deployment of Intelligent Transportation Systems (ITS). It focuses on state and local practices when federal ...

  18. Purchasing factor concentrates in the 21st century through competitive tendering.

    PubMed

    Hay, C R M

    2013-09-01

    The increasing intensity of treatment, the widespread adoption of factor VIII and IX prophylaxis and increasing usage over the past decade have led to haemophilia becoming an almost uniquely expensive condition to treat. The average adult with severe haemophilia A in the UK used 250,000 IU of factor VIII in 2011/2012, at a cost in excess of £ 100,000 p.a. The cost to the end-user may be considerably higher than this for some US patients supplied by home care companies with high on-costs. This has led to a high level of administrative scrutiny of treatment and an imperative to procure clotting factor concentrates more efficiently and collectively. National procurement schemes have run successfully in various countries and will become commoner. The UK system of procurement is described. This system, following EU procurement rules, evaluated products technically and by price. The price of bioequivalent products was determined by reverse e-auction. Considerable cost reductions were achieved whilst retaining all suppliers and maintaining a degree of prescribing freedom. Elements of this system could be more widely applied. © 2013 John Wiley & Sons Ltd.

  19. Hunter-gatherer mobility and embedded raw-material procurement strategies in the mediterranean upper paleolithic.

    PubMed

    Tomasso, Antonin; Porraz, Guillaume

    2016-05-06

    Since the early 1980s, the sourcing of lithic raw materials has become central to studies of the territorial range and mobility strategies of Pleistocene foraging societies. Results have been fruitful but somehow repetitive. We will discuss the embedded procurement strategy, which presumes that raw material acquisition was part of other subsistence activities rather than an autonomous technological task. We argue that this theoretical assumption, when taken as dogma, restricts the role of technology in human history and also underestimates the way some lithic resources may have affected the organization of past hunter-gatherers. We base our discussion on the Upper Paleolithic (UP) from the Liguro-Provençal arc, with examples from the Proto-Aurignacian and the Epigravettian. Our regional record shows that in this context the movement of rocks over distances greater than 100 km was the norm rather than the exception. We argue that these long-distance procurements mirror technical needs that were oriented toward the selection of high-quality flints. We support the hypothesis that indirect procurement was an important component of regional socio-economic networks. © 2016 Wiley Periodicals, Inc.

  20. 22 CFR 124.10 - Nontransfer and use assurances.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 124.10 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS AGREEMENTS, OFF-SHORE PROCUREMENT AND OTHER DEFENSE SERVICES § 124.10 Nontransfer and use assurances. (a) Types of... Controls. With respect to all agreements involving classified articles, including classified technical data...

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top