Environmental regulations: Technical reference manual TRM 016.01, September 15, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-09-15

This TRM is divided into two primary sections. The first section entitled Environmental Programs provides a synopsis of each environmental Act (Federal Law). The second section of the TRM is entitled Environmental Operations. This section is in effect the nuts and bolts of the regulatory compliance programs. In this section, the program manager can reference specific requirements which will aid in structuring the compliance program.

Radiological Defense. Textbook.

ERIC Educational Resources Information Center

Defense Civil Preparedness Agency (DOD), Washington, DC.

This textbook has been prepared under the direction of the Defense Civil Preparedness Agency (DCPA) Staff College for use as a student reference manual in radiological defense (RADEF) courses. It provides much of the basic technical information necessary for a proper understanding of radiological defense and summarizes RADEF planning and expected…

Public Health Pest Control.

ERIC Educational Resources Information Center

Arizona Univ., Tucson. Cooperative Extension Service.

This manual supplies information helpful to individuals wishing to become certified in public health pest control. It is designed as a technical reference for vector control workers and as preparatory material for structural applicators of restricted use pesticides to meet the General Standards of Competency required of commercial applicators. The…

Sports Fields: A Manual for Design Construction and Maintenance.

ERIC Educational Resources Information Center

Puhalla, Jim; Krans, Jeff; Goatley, Mike

Comprehensive technical reference information is provided for those responsible for the design, construction, renovation, or maintenance of sports grounds. Chapters illustrate specific design elements of all popular sports facilities, and explain how those elements are integrated in a successful project; explore commonly encountered sports field…

Guidelines for the Selection of Chemical Protective Clothing. Volume 2. Technical and Reference Manual.

DTIC Science & Technology

1987-02-01

Handler’s Suit for Protection from Chlorine Trifluoride and Elemental Fluorine Technical Report AFRPL-TR-71-44 (August 1971) NTIS AD731556 199 Masterman’s...Protective Clothing for Chlorine , Edition 1 Chlorine Institute Pamphlet 65, The Chlorine Institute, Inc. New York, New York, (June 1978) 15 Anon...Chemical Company Selection of Gloves for Use With Chlorinated Solvents Chlorinated Solvents Information Midland, Michigan 48640 101 Duffy, R.M., A.R.Beer

SAM Photovoltaic Model Technical Reference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilman, P.

2015-05-27

This manual describes the photovoltaic performance model in the System Advisor Model (SAM). The U.S. Department of Energy’s National Renewable Energy Laboratory maintains and distributes SAM, which is available as a free download from https://sam.nrel.gov. These descriptions are based on SAM 2015.1.30 (SSC 41).

14 CFR 171.51 - Maintenance and operations requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... sections of FAA manuals by reference. (9) Keeping of station logs and other technical reports, and the submission of reports required by § 171.53. (10) Monitoring of the facility. (11) Inspections by United... in accordance with procedures approved by the FAA at the time of commissioning, and shall report the...

14 CFR 171.51 - Maintenance and operations requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... sections of FAA manuals by reference. (9) Keeping of station logs and other technical reports, and the submission of reports required by § 171.53. (10) Monitoring of the facility. (11) Inspections by United... in accordance with procedures approved by the FAA at the time of commissioning, and shall report the...

14 CFR 171.51 - Maintenance and operations requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... sections of FAA manuals by reference. (9) Keeping of station logs and other technical reports, and the submission of reports required by § 171.53. (10) Monitoring of the facility. (11) Inspections by United... in accordance with procedures approved by the FAA at the time of commissioning, and shall report the...

Media Center: Operations Handbook.

ERIC Educational Resources Information Center

Dependents Schools (DOD), Washington, DC.

This guide to basic technical procedures recommended in the operation of within-school media centers is intended for all Department of Defense Dependent Schools (DoDDS) media specialists, clerks, aides, and technicians. The first four sections refer to the general media program functions identified in the related manual, "A is for Apple:…

Second Generation Weather Impacts Decision Aid User’s Manual

DTIC Science & Technology

2013-09-01

from the pulldown Base Reference Time menu. Most models start at times based on Coordinated Universal Time (UTC) or Zulu time (Z) with the selections...Effects Matrix Z Zulu time 31 No. of Copies Organization 1 DEFENSE TECHNICAL (PDF) INFORMATION CTR DTIC OCA 1 DIRECTOR (PDF) US

Oak Ridge TNS Program: system description manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reid, R.L.; Becraft, W.R.; Brown, T.G.

1979-05-01

This document provides a systems description of the Reference Design for The Next Step (TNS) evolved at Oak Ridge National Laboratory (ORNL) during FY 1978. The description is presented on the basis of 24 individual device and facility systems. Additional information on these systems, the Reference Design, and the FY 1978 Oak Ridge TNS activities can be found in the associated technical memoranda, ORNL/TM-6720 and ORNL/TM-6722--ORNL/TM-6733.

An observational study to assess if automated diabetic retinopathy image assessment software can replace one or more steps of manual imaging grading and to determine their cost-effectiveness.

PubMed

Tufail, Adnan; Kapetanakis, Venediktos V; Salas-Vega, Sebastian; Egan, Catherine; Rudisill, Caroline; Owen, Christopher G; Lee, Aaron; Louw, Vern; Anderson, John; Liew, Gerald; Bolter, Louis; Bailey, Clare; Sadda, SriniVas; Taylor, Paul; Rudnicka, Alicja R

2016-12-01

Diabetic retinopathy screening in England involves labour-intensive manual grading of retinal images. Automated retinal image analysis systems (ARIASs) may offer an alternative to manual grading. To determine the screening performance and cost-effectiveness of ARIASs to replace level 1 human graders or pre-screen with ARIASs in the NHS diabetic eye screening programme (DESP). To examine technical issues associated with implementation. Observational retrospective measurement comparison study with a real-time evaluation of technical issues and a decision-analytic model to evaluate cost-effectiveness. A NHS DESP. Consecutive diabetic patients who attended a routine annual NHS DESP visit. Retinal images were manually graded and processed by three ARIASs: iGradingM (version 1.1; originally Medalytix Group Ltd, Manchester, UK, but purchased by Digital Healthcare, Cambridge, UK, at the initiation of the study, purchased in turn by EMIS Health, Leeds, UK, after conclusion of the study), Retmarker (version 0.8.2, Retmarker Ltd, Coimbra, Portugal) and EyeArt (Eyenuk Inc., Woodland Hills, CA, USA). The final manual grade was used as the reference standard. Arbitration on a subset of discrepancies between manual grading and the use of an ARIAS by a reading centre masked to all grading was used to create a reference standard manual grade modified by arbitration. Screening performance (sensitivity, specificity, false-positive rate and likelihood ratios) and diagnostic accuracy [95% confidence intervals (CIs)] of ARIASs. A secondary analysis explored the influence of camera type and patients' ethnicity, age and sex on screening performance. Economic analysis estimated the cost per appropriate screening outcome identified. A total of 20,258 patients with 102,856 images were entered into the study. The sensitivity point estimates of the ARIASs were as follows: EyeArt 94.7% (95% CI 94.2% to 95.2%) for any retinopathy, 93.8% (95% CI 92.9% to 94.6%) for referable retinopathy and 99.6% (95% CI 97.0% to 99.9%) for proliferative retinopathy; and Retmarker 73.0% (95% CI 72.0% to 74.0%) for any retinopathy, 85.0% (95% CI 83.6% to 86.2%) for referable retinopathy and 97.9% (95% CI 94.9 to 99.1%) for proliferative retinopathy. iGradingM classified all images as either 'disease' or 'ungradable', limiting further iGradingM analysis. The sensitivity and false-positive rates for EyeArt were not affected by ethnicity, sex or camera type but sensitivity declined marginally with increasing patient age. The screening performance of Retmarker appeared to vary with patient's age, ethnicity and camera type. Both EyeArt and Retmarker were cost saving relative to manual grading either as a replacement for level 1 human grading or used prior to level 1 human grading, although the latter was less cost-effective. A threshold analysis testing the highest ARIAS cost per patient before which ARIASs became more expensive per appropriate outcome than human grading, when used to replace level 1 grader, was Retmarker £3.82 and EyeArt £2.71 per patient. The non-randomised study design limited the health economic analysis but the same retinal images were processed by all ARIASs in this measurement comparison study. Retmarker and EyeArt achieved acceptable sensitivity for referable retinopathy and false-positive rates (compared with human graders as reference standard) and appear to be cost-effective alternatives to a purely manual grading approach. Future work is required to develop technical specifications to optimise deployment and address potential governance issues. The National Institute for Health Research (NIHR) Health Technology Assessment programme, a Fight for Sight Grant (Hirsch grant award) and the Department of Health's NIHR Biomedical Research Centre for Ophthalmology at Moorfields Eye Hospital and the University College London Institute of Ophthalmology.

76 FR 60359 - Phytosanitary Treatments; Location of and Process for Updating Treatment Schedules; Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-29

... Treatment Manual, and we did not retain text explaining that irradiation can be used as a substitute for... irradiation treatment, respectively. Where these sections have referred to facilities capable of performing...)(1) stated that irradiation treatment in accordance with part 305 could be substituted for other...

Methods and Models of the Hanford Internal Dosimetry Program, PNNL-MA-860

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carbaugh, Eugene H.; Bihl, Donald E.; Maclellan, Jay A.

2009-09-30

The Hanford Internal Dosimetry Program (HIDP) provides internal dosimetry support services for operations at the Hanford Site. The HIDP is staffed and managed by the Radiation and Health Technology group, within the Pacific Northwest National Laboratory (PNNL). Operations supported by the HIDP include research and development, the decontamination and decommissioning of facilities formerly used to produce and purify plutonium, and waste management activities. Radioelements of particular interest are plutonium, uranium, americium, tritium, and the fission and activation product radionuclides 137Cs, 90Sr, and 60Co. This manual describes the technical basis for the design of the routine bioassay monitoring program and formore » assessment of internal dose. The purposes of the manual are as follows: • Provide assurance that the HIDP derives from a sound technical base. • Promote the consistency and continuity of routine program activities. • Provide a historical record. • Serve as a technical reference for radiation protection personnel. • Aid in identifying and planning for future needs.« less

Otto Salomon in Nääs and His First Icelandic Students in Nordic Sloyd

ERIC Educational Resources Information Center

Thorsteinsson, Gisli; Ólafsson, Brynjar

2014-01-01

Pedagogically aimed craft education was established around the same time as the school-based system of formative education, under the term Sloyd. This refers to a pedagogical system of manual training that promotes general child development, through the acquisition of the technical skills employed in woodwork, metalwork, sewing, knitting and the…

Engineering Drawing Practices - Volume I of II: Aerospace and Ground Support Equipment

NASA Technical Reports Server (NTRS)

Schwindt, Paul A.

2015-01-01

This manual establishes the essential requirements and reference documents for the preparation and revision of digital product definition data sets prepared for or by NASA at KSC. This volume is only applicable to KSC in-house programs/projects. These requirements do not apply to the preparation of illustrations, artwork, or figures in technical publications.

Water Purification, Distribution and Sewage Disposal. Appropriate Technologies for Development. Reprint R-29.

ERIC Educational Resources Information Center

1979

This document, designed to serve as a training manual for technical instructors and as a field resource reference for Peace Corps volunteers, consists of nine units. Unit topics focus on: (1) water supply sources; (2) water treatment; (3) planning water distribution systems; (4) characteristics of an adequate system; (5) construction techniques;…

Guidelines for preparing software user documentation

NASA Technical Reports Server (NTRS)

Miller, Diane F.

1987-01-01

Clear, easy-to-use software user's manuals make strong demands on special technical communication techniques. Principles and guidelines are given for analyzing the audience and dealing with wide-ranging backgrounds of potential users. Types of information to be included in a complete manual are suggested, with a technique for creating a user-oriented rather than process-oriented organization. Accuracy verification is emphasized. Simple tips are gievn for formatting for quick comprehension and reference, for deciding on packaging, for creating helpful illustrations and examples, and for setting up clear and consistent conventions. Simple guidelines are offered for writing clearly and concisely and for editing.

Status and Opportunities for Improving the Consistency of Technical Reference Manuals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jayaweera, Tina; Velonis, Aquila; Haeri, Hossein

Across the United States, energy-efficiency program administrators rely on Technical Reference Manuals (TRMs) as sources for calculations and deemed savings values for specific, well-defined efficiency measures. TRMs play an important part in energy efficiency program planning by providing a common and consistent source for calculation of ex ante and often ex post savings. They thus help reduce energy-efficiency resource acquisition costs by obviating the need for extensive measurement and verification and lower performance risk for program administrators and implementation contractors. This paper considers the benefits of establishing region-wide or national TRMs and considers the challenges of such undertaking due tomore » the difficulties in comparing energy savings across jurisdictions. We argue that greater consistency across TRMs in the approaches used to determine deemed savings values, with more transparency about assumptions, would allow better comparisons in savings estimates across jurisdictions as well as improve confidence in reported efficiency measure savings. To support this thesis, we review approaches for the calculation of savings for select measures in TRMs currently in use in 17 jurisdictions. The review reveals differences in the saving methodologies, technical assumptions, and input variables used for estimating deemed savings values. These differences are described and their implications are summarized, using four, common energy-efficiency measures as examples. Recommendations are then offered for establishing a uniform approach for determining deemed savings values.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goke, Sarah Hayes; Elliott, Nathan Ryan

The Sandia National Laboratories’ Internal Dosimetry Technical Basis Manual is intended to provide extended technical discussion and justification of the internal dosimetry program at SNL. It serves to record the approach to evaluating internal doses from radiobioassay data, and where appropriate, from workplace monitoring data per the Department of Energy Internal Dosimetry Program Guide DOE G 441.1C. The discussion contained herein is directed primarily to current and future SNL internal dosimetrists. In an effort to conserve space in the TBM and avoid duplication, it contains numerous references providing an entry point into the internal dosimetry literature relevant to this program.more » The TBM is not intended to act as a policy or procedure statement, but will supplement the information normally found in procedures or policy documents. The internal dosimetry program outlined in this manual is intended to meet the requirements of Federal Rule 10CFR835 for monitoring the workplace and for assessing internal radiation doses to workers.« less

Learning from technical documents: the role of intermodal referring expressions.

PubMed

Dupont, Vincent; Bestgen, Yves

2006-01-01

We investigated the impact of two types of intermodal referring expressions on efficiency of instructions for use. User manuals for software or technical devices such as a video recording system frequently combine verbal instructions and illustrations. Much research has shown that the presence of an illustration has a beneficial effect on learning. The present study focuses on a factor that modulates this beneficial effect. The combination of text and an illustration can be effective only if the user integrates the information coming from these two media. This integration depends largely on the intermodal referential expressions, the function of which is to mark explicitly the relations between the text and the illustration. In an experiment (N = 104), we compared the effectiveness of two intermodal referring expressions often used in procedural texts: indexes (numbers introduced in the illustrations and in the instructions to establish cross-references) and icons (visual representations of the components of the device, which are inserted in the verbal instructions). The icons condition led to the most efficient use of the device. This experiment shows that learning from multimedia documents depends on the possibility of effectively connecting the verbal instructions to the illustration. Taking into account the ergonomic properties of the cross-media referring expressions should allow text designers to improve the effectiveness of technical documents.

Operational and maintenance instruction manual for the Ingham County Geriatric Medical Care Facility solar water-heating system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Ingham County solar system consists of approximately 10,000 square feet of solar collectors connected in a closed configuration loop. The primary loop solution is a 1:12 mixture of water and propylene glycol which flows through the tube side of a heat exchanger connected to the primary storage tank. The heat energy which is supplied to the primary storage tank is subsequently used to preheat the temperature of the laundry water, kitchen water, and domestic potable water. Included in this report are: detailed drawings and flow chart; operational methodology; preventive maintenance instructions; general instructions and safety precautions; and a correctivemore » maintenance and tabulation of failure modes. Appendices include: manufacturers technical manual and component specifications; IBM data sensors and responsibilities; digital county monitor operations manual; and on site monitor operations manual. Reference CAPE-2834. (LS)« less

PVWatts Version 5 Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dobos, A. P.

2014-09-01

The NREL PVWatts calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes includes several built-in parameters that are hidden from the user. This technical reference describes the sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimate. This reference is applicable to the significantly revised version of PVWatts released by NREL in 2014.

Test Technical Manual 2014 GED® Test

ERIC Educational Resources Information Center

GED Testing Service, 2014

2014-01-01

This manual was written to provide technical information regarding the General Educational Development (GED®) test as evidence that the GED® test is technically sound. Throughout this manual, documentation is provided regarding the development of the GED® test and data collection activities, as well as evidence of reliability and validity. This…

Technical Manual. The ACT®

ERIC Educational Resources Information Center

ACT, Inc., 2014

2014-01-01

This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

ACT Plan: Technical Manual. 2013/2014

ERIC Educational Resources Information Center

ACT, Inc., 2013

2013-01-01

This manual contains information about the American College Test (ACT) Plan® program. The principal focus of this manual is to document the Plan program's technical adequacy in light of its intended purposes. This manual supersedes the 2011 edition. The content of this manual responds to requirements of the testing industry as established in the…

Pennsylvania Blue Shield Job Linked Skills Program. Teacher's Manual [and] Technical Manual.

ERIC Educational Resources Information Center

Pennsylvania State Univ., University Park. Inst. for the Study of Adult Literacy.

Two closely related publications from the same project, a Teacher's Manual" and a "Technical Manual", are combined here. These manuals are intended to accompany a work force literacy course designed to meet the basic skills needs of midliterate adults employed or preparing for employment in the health insurance industry.…

Introduction to computers: Reference guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ligon, F.V.

1995-04-01

The ``Introduction to Computers`` program establishes formal partnerships with local school districts and community-based organizations, introduces computer literacy to precollege students and their parents, and encourages students to pursue Scientific, Mathematical, Engineering, and Technical careers (SET). Hands-on assignments are given in each class, reinforcing the lesson taught. In addition, the program is designed to broaden the knowledge base of teachers in scientific/technical concepts, and Brookhaven National Laboratory continues to act as a liaison, offering educational outreach to diverse community organizations and groups. This manual contains the teacher`s lesson plans and the student documentation to this introduction to computer course.

Capabilities-Based Planning for Energy Security at Department of Defense Installations

DTIC Science & Technology

2013-01-01

Support Services—The ability to provide assis- tance for payload and launch vehicles including safety, reception , staging, integration, movement to the...pubs/technical_reports/TR1249.html Davis, Paul K., and Paul Dreyer, RAND’s Portfolio Analysis Tool (PAT): Theory , Methods, and Reference Manual, Santa...Steven C. Bankes, and Michael Egner, Enhancing Strategic Planning with Massive Scenario Generation: Theory and Experiments, Santa Monica, Calif

78 FR 22367 - Proposed Information Collection (Service Data Manual) Activity: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-15

... technical medical equipment and devices or mechanical equipment. DATES: Written comments and recommendations... manuals and maintenance/repair manuals when technical medical equipment and devices, or mechanical...

Technical Manual: 2002 Series GED Tests

ERIC Educational Resources Information Center

Ezzelle, Carol; Setzer, J. Carl

2009-01-01

This manual was written to provide technical information regarding the 2002 Series GED (General Educational Development) Tests. Throughout this manual, documentation is provided regarding the development of the GED Tests, data collection activities, as well as reliability and validity evidence. The purpose of this manual is to provide evidence…

Engine-Airframe Integration for Rotorcraft.

DTIC Science & Technology

1986-05-01

detailed technical literature. Initial attempts were to apply this existing fixed-wing data ; but, in general, only small selective areas were applicable...tabulated loss coefficients for a great variety of geometries; two excellent ones are the SAE Manual and GE Data books (References 2 and 3). The loss...pressure drop due to friction is somewhat more complicated because friction factor data given in the literature applies to fully developed duct flow

Using Object-Oriented Databases for Implementation of Interactive Electronic Technical Manuals

DTIC Science & Technology

1992-03-01

analytical process applied throughout the system acquisition program in order to define supportability related design factors and to ensure development of a...Node Alternatives Node Alternatives (NODEALTS) is a list of mutually exclusive nodes, grouped together by the fact that they apply to different...contextual situations. The content specific layer NODEALTS element is a reference to a set of nodes that might apply in different situations. No hierarchy

Automation in the Teaching of Descriptive Geometry and CAD. High-Level CAD Templates Using Script Languages

NASA Astrophysics Data System (ADS)

Moreno, R.; Bazán, A. M.

2017-10-01

The main purpose of this work is to study improvements to the learning method of technical drawing and descriptive geometry through exercises with traditional techniques that are usually solved manually by applying automated processes assisted by high-level CAD templates (HLCts). Given that an exercise with traditional procedures can be solved, detailed step by step in technical drawing and descriptive geometry manuals, CAD applications allow us to do the same and generalize it later, incorporating references. Traditional teachings have become obsolete and current curricula have been relegated. However, they can be applied in certain automation processes. The use of geometric references (using variables in script languages) and their incorporation into HLCts allows the automation of drawing processes. Instead of repeatedly creating similar exercises or modifying data in the same exercises, users should be able to use HLCts to generate future modifications of these exercises. This paper introduces the automation process when generating exercises based on CAD script files, aided by parametric geometry calculation tools. The proposed method allows us to design new exercises without user intervention. The integration of CAD, mathematics, and descriptive geometry facilitates their joint learning. Automation in the generation of exercises not only saves time but also increases the quality of the statements and reduces the possibility of human error.

The Interactive Electronic Technical Manual: Requirements, Current Status, and Implementation. Strategy Considerations.

DTIC Science & Technology

1991-07-01

authoring systems. Concurrently, great strides in computer-aided design and computer-aided maintenance have contributed to this capability. 12 Junod ...J.; William A. Nugent; and L. John Junod . Plan for the Navy/Air Force Test of the Interactive Electronic Technical Manual (IETM) at Cecil Field...AFHRL Logistics and Human Factors Division, WPAFB. Aug 1990. 12. Junod , John L. PY90 Interactive Electronic Technical Manual (IETM) Portable Delivery

Pollutant Assessments Group procedures manual: Volume 2, Technical procedures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

This is volume 2 of the manuals that describes the technical procedures currently in use by the Pollution Assessments Group. This manual incorporates new developments in hazardous waste assessment technology and administrative policy. Descriptions of the equipment, procedures and operations of such things as radiation detection, soil sampling, radionuclide monitoring, and equipment decontamination are included in this manual. (MB)

TADS Needs Assessment Procedures Manual, Summer 1980.

ERIC Educational Resources Information Center

Black, Talbot; And Others

The TADS (Technical Assistance Development System) Needs Assessment Manual is designed to guide the comprehensive review of Handicapped Children's Early Education Program (HCEEP) demonstration projects in identifying technical assistance needs. An introduction reviews the TADS technical assistance model which includes program planning, needs…

Improving Sex Equity in Postsecondary Vocational/Technical Programs: A Resource Manual.

ERIC Educational Resources Information Center

Lovelace, Bill E.; And Others

This manual was developed to assist postsecondary administrators, faculty, staff, and students by providing materials specifically designed to eliminate sex bias and stereotyping of students and to recruit students into nontraditional careers and vocational-technical programs. The manual is organized in six sections. The first section introduces…

The Scoop on Good Humor.

ERIC Educational Resources Information Center

Pieper, Gail W.

1987-01-01

Recommends teaching about the uses of humor in technical writing classes by using computer user manuals. Suggests that humor has a place in technical communication, particularly in computer manuals, where new users' apprehension must be reduced, heavy technical points need clarification, and warnings and cautions should be reinforced. (SKC)

Economic Evaluation of Building Design, Construction, Operation and Maintenance. Instructor's Manual.

ERIC Educational Resources Information Center

Ruegg, Rosalie T.; Marshall, Harold E.

This instructor's manual describes each section of a 3-day technical seminar on how to measure the economic impact of alternative designs, systems, and operation and maintenance strategies in federal buildings. The manual was prepared to help instructors of the General Services Administration conduct technically sound and comprehensive seminars.…

Value Engineering. Technical Manual. School Facilities Development Procedures Manual.

ERIC Educational Resources Information Center

Washington Office of the State Superintendent of Public Instruction, Olympia.

Value Engineering (VE) is a cost-optimizing technique used to analyze design quality and cost-effectiveness. The application of VE procedures to the design and construction of school facilities has been adopted by the state of Washington. This technical manual provides guidance in developing the scope and applicability of VE to school projects; in…

SHEDS-Dietary Technical Manual Appendices

EPA Pesticide Factsheets

The appendices for the SHEDS-Dietary Technical Manual include a sample food diary, backgorund information on the water concentration data used in SHEDS-Dietary, a food list, food definitions and sample code.

Web-Based Interactive Electronic Technical Manual (IETM) Common User Interface Style Guide, Version 2.0

DTIC Science & Technology

2003-07-01

Technical Report WEB-BASED INTERACTIVE ELECTRONIC TECHNICAL MANUAL (IETM) COMMON USER INTERFACE STYLE GUIDE Version 2.0 – July 2003 by L. John Junod ...ACKNOWLEDGEMENTS The principal authors of this document were: John Junod – NSWC, Carderock Division, Phil Deuell – AMSEC LLC, Kathleen Moore

Technical Manual: easyCBM. Technical Report #1408

ERIC Educational Resources Information Center

Anderson, Daniel; Alonzo, Julie; Tindal, Gerald; Farley, Dan; Irvin, P. Shawn; Lai, Cheng-Fei; Saven, Jessica L.; Wray, Kraig A.

2014-01-01

Since the easyCBM© learning system was first published in 2006, over $8 million of federal funding (both from the Office of Special Education Programs and more recently from the Institute of Education Sciences) has been used to develop, study, and refine the assessments available on the system. This Technical Manual summarizes the ongoing research…

Technical Reference Manual to Allied Medical Publication 7.5 (AMedP 7.5) NATO Planning Guide for the Estimation of CBRN Casualties

DTIC Science & Technology

2016-10-01

Response Subject Matter Expert Review Meeting, 23-25 June 2008, Albuquerque, New Mexico , United States of America, IDA Document D-3884 (Alexandria, VA...Meeting, 26 June 2008, Albuquerque, New Mexico , United States of America, IDA Document D-3885 (Alexandria, VA: Institute for Defense Analyses, August...26 June 2008 radiological human response meetings in Albuquerque, New Mexico :  Canada – Commander Ian Torrie, CFHSG-DHSO – Diana Wilkinson, DRDC

Heating Plant Options Economic Analysis System (HPECON): User’s Manual and Technical Reference

DTIC Science & Technology

1991-03-01

Bulb Temperature: The temperature of dry air. Dry Scrubber: A flue gas desulfurization system in which sulfur dioxide is collected by a solid medium...method of solution of a problem. Flue Gas : The gaseous products of combustion. Fly Ash: The fine particles of ash which are carried by the products...AFM 88-29 (U.S. Air Force, July 1978); TM 5-785 (U.S. Army, July 1978); NAVFAC P-89 (Naval Facilities Engineering Command, July 1978). " Flue Gas

Technical Reference Manual: NATO Planning Guide for the Estimation of Chemical, Biological, Radiological, and Nuclear (CBRN), Casualties, Allied Medical Publication-8(C)

DTIC Science & Technology

2010-08-01

use of these submodels was reached. The details of the four agent-specific meetings, including the dates , locations, and participating SMEs are...Protected Armored Personnel Carrier – Closed 0% 0% Armored Personnel Carrier – Moving 50% 0% Armored Personnel Carrier – Open 100% 0% Earth Shelter 75...limited number of radioisotopes , typically emitting gamma and/or beta radiation. RDDs include at least two types of radiation sources: 1) point

Cost-Benefit Analysis of a Bridge to Integrate the Management of Technical Information for Producing Technical Manuals and Training Courses

DTIC Science & Technology

2010-11-01

Philadelphia, and all Computer-Based Training (CBT) courses delivered by Navy eLearning (NeL), a part of the Naval Education and Training Command (NETC...concentrated exclu- sively on the benefit side—whether the Bridge would save money in producing future technical manuals and training courses. It...of $78.1 million in 10-year costs: a savings of $86.8 million in producing future HM&E manuals and NeL-delivered courses less $8.7 million in

Control technology appendices for pollution control technical manuals. Final report, June 1982-February 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1983-04-01

The document is one of six technical handbooks prepared by EPA to help government officials granting permits to build synfuels facilities, synfuels process developers, and other interested parties. They provide technical data on waste streams from synfuels facilities and technologies capable of controlling them. Process technologies covered in the manuals include coal gasification, coal liquefaction by direct and idirect processing, and the extraction of oil from shale. The manuals offer no regulatory guidance, allowing the industry flexibility in deciding how best to comply with environmental regulations.

Writing Performance Goals: Strategy and Prototypes. A Manual for Vocational and Technical Educators.

ERIC Educational Resources Information Center

McGraw-Hill Book Co., New York, NY. Gregg Div.

The result of a cooperative project of the Center for Vocational and Technical Education at the Ohio State University and the McGraw-Hill Book Company, this manual was prepared to develop prototypes of performance goals for use by curriculum specialists and developers of instructional materials in vocational and technical education and to provide…

Technical Manual for the Conceptual Learning and Development Assessment Series II: Cutting Tool. Technical Report No. 435. Reprinted December 1977.

ERIC Educational Resources Information Center

DiLuzio, Geneva J.; And Others

This document accompanies Conceptual Learning and Development Assessment Series II: Cutting Tool, a test constructed to chart the conceptual development of individuals. As a technical manual, it contains information on the rationale, development, standardization, and reliability of the test, as well as essential information and statistical data…

Technical Manual for the Conceptual Learning and Development Assessment Series IV: Tree. Technical Report No. 437. Reprinted December 1977.

ERIC Educational Resources Information Center

DiLuzio, Geneva J.; And Others

This document accompanies the Conceptual Learning and Development Assessment Series III: Tree, a test constructed to chart the conceptual development of individuals. As a technical manual, it contains information on the rationale, development, standardization, and reliability of the test, as well as essential information and statistical data for…

Technical Manual for the Conceptual Learning and Development Assessment Series II: Equilateral Triangle. Technical Report No. 434. Reprinted December 1977.

ERIC Educational Resources Information Center

DiLuzio, Geneva J.; And Others

This document accompanies the Conceptual Learning and Development Assessment Series I: Equilateral Triangle, a test constructed to chart the conceptual developemnt of individuals. As a technical manual, it contains information on the rationale, development, standardization, and reliability of the test, as well as essential information and…

Technical Manual for the Conceptual Learning and Development Assessment Series III: Noun. Technical Report No. 436. Reprinted December 1977.

ERIC Educational Resources Information Center

DiLuzio, Geneva J.; And Others

This document accompanies the Conceptual Learning and Development Assessment Series IV: Noun, a test constructed to chart the conceptual development of individuals. As a technical manual, it contains information on the rationale, development, standardization, and reliability of the test, as well as essential information and statistical data for…

Space station automation of common module power management and distribution, volume 2

NASA Technical Reports Server (NTRS)

Ashworth, B.; Riedesel, J.; Myers, C.; Jakstas, L.; Smith, D.

1990-01-01

The new Space Station Module Power Management and Distribution System (SSM/PMAD) testbed automation system is described. The subjects discussed include testbed 120 volt dc star bus configuration and operation, SSM/PMAD automation system architecture, fault recovery and management expert system (FRAMES) rules english representation, the SSM/PMAD user interface, and the SSM/PMAD future direction. Several appendices are presented and include the following: SSM/PMAD interface user manual version 1.0, SSM/PMAD lowest level processor (LLP) reference, SSM/PMAD technical reference version 1.0, SSM/PMAD LLP visual control logic representation's (VCLR's), SSM/PMAD LLP/FRAMES interface control document (ICD) , and SSM/PMAD LLP switchgear interface controller (SIC) ICD.

Spectrum Orbit Utilization Program documentation: SOUP5 version 3.8 user's manual, volume 1, chapters 1 through 5

NASA Technical Reports Server (NTRS)

Davidson, J.; Ottey, H. R.; Sawitz, P.; Zusman, F. S.

1985-01-01

The underlying engineering and mathematical models as well as the computational methods used by the Spectrum Orbit Utilization Program 5 (SOUP5) analysis programs are described. Included are the algorithms used to calculate the technical parameters, and references to the technical literature. The organization, capabilities, processing sequences, and processing and data options of the SOUP5 system are described. The details of the geometric calculations are given. Also discussed are the various antenna gain algorithms; rain attenuation and depolarization calculations; calculations of transmitter power and received power flux density; channelization options, interference categories, and protection ratio calculation; generation of aggregrate interference and margins; equivalent gain calculations; and how to enter a protection ratio template.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Chemical Hazard Response Information System (CHRIS) is designed to provide timely information essential for proper decision-making by responsible Coast Guard personnel and others during emergencies involving the water transport of hazardous chemicals. A secondary purpose is the provision of certain basic non-emergency-related information to support the Coast Guard in its efforts to achieve improved levels of safety in the bulk shipment of hazardous chemicals. CHRIS consists of four reference guides or manuals, a regional contingency plan, a hazard-assessment computer system (HACS), and an organizational entity located at Coast Guard headquarters. The four manuals contain chemical data, hazard-assessment methods, andmore » response guides. Regional data for the entire coastline are included in the Coastal Regional Contingency Plans. The headquarters staff operates the hazard-assessment computer system and provides technical assistance on request by field personnel during emergencies. In addition, it is responsible for periodic update and maintenance of CHRIS. A brief description of each component of CHRIS and its relation to this manual - the Hazard-Assessment Handbook - is provided.« less

Normalization of hydrocarbon emissions in Germany

NASA Astrophysics Data System (ADS)

Levitin, R. E.

2018-05-01

In connection with the integration of the Russian Federation into the European space, many technical regulations and methodologies are being corrected. The work deals with the German legislation in the field of determining of hydrocarbon emissions and the methodology for determining the emissions of oil products from vertical steel tanks. In German law, the Emission Protection Act establishes only basic requirements. Mainly technical details, which have importance for practice, are regulated in numerous Orders on the Procedure for the Implementation of the Law (German abbr. - BimSchV). Documents referred to by the Technical Manual on the Maintenance of Clean Air are a step below on the hierarchical ladder of legislative and regulatory documentation. This set of documents is represented by numerous DIN standards and VDI guidelines. The article considers the methodology from the guidance document VDI 3479. The shortcomings and problems of applying the given method in Russia are shown.

FHWA Traffic Noise Model, version 1.0 technical manual

DOT National Transportation Integrated Search

1998-02-01

This Technical Manual is for the Federal Highway Administrations Traffic Noise Model (FHWA TNM), Version 1.0 -- the FHWAs computer program for highway traffic noise prediction and analysis. Two companion reports, a Users Guide and a data r...

Battery Test Manual For Electric Vehicles, Revision 3

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christophersen, Jon P.

2015-06-01

This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office. It is based on technical targets for commercial viability established for energy storage development projects aimed at meeting system level DOE goals for Electric Vehicles (EV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for EVs. However, it does share some methods described in the previously published battery test manual for plug-in hybrid electric vehicles. Due to the complexity of some of themore » procedures and supporting analysis, future revisions including some modifications and clarifications of these procedures are expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices. The DOE-United States Advanced Battery Consortium (USABC), Technical Advisory Committee (TAC) supported the development of the manual. Technical Team points of contact responsible for its development and revision are Chul Bae of Ford Motor Company and Jon P. Christophersen of the Idaho National Laboratory. The development of this manual was funded by the Unites States Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office. Technical direction from DOE was provided by David Howell, Energy Storage R&D Manager and Hybrid Electric Systems Team Leader. Comments and questions regarding the manual should be directed to Jon P. Christophersen at the Idaho National Laboratory (jon.christophersen@inl.gov).« less

Writing Clinic for Business and Technical Writers.

ERIC Educational Resources Information Center

Mercer County Community Coll., Trenton, NJ.

This document offers brief lesson plans for four courses: (1) an 8-hour refresher course for employees who write memos, short reports, and letters; (2) an 8-hour refresher course on creating a short document; (3) a 16-hour course on technical manual writing; and (4) an 8-hour course on technical manual writing. The courses were part of a workplace…

Training Manuals and Technical Publications.

ERIC Educational Resources Information Center

Army Test and Evaluation Command, Aberdeen Proving Ground, MD.

The objective of the Materiel Test Procedure is to describe methods for determining the need for adequacy of comprehensiveness, and clarity of training manuals and technical publications (or other pertinent types of literature) relating to the ammunition or ammunition components being tested. (Author)

U.S. Department of Energy Vehicle Technologies Program: Battery Test Manual For Plug-In Hybrid Electric Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christophersen, Jon P.

2014-09-01

This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office. It is based on technical targets for commercial viability established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of somemore » of the procedures and supporting analysis, future revisions including some modifications and clarifications of these procedures are expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices. The DOE-United States Advanced Battery Consortium (USABC), Technical Advisory Committee (TAC) supported the development of the manual. Technical Team points of contact responsible for its development and revision are Renata M. Arsenault of Ford Motor Company and Jon P. Christophersen of the Idaho National Laboratory. The development of this manual was funded by the Unites States Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office. Technical direction from DOE was provided by David Howell, Energy Storage R&D Manager and Hybrid Electric Systems Team Leader. Comments and questions regarding the manual should be directed to Jon P. Christophersen at the Idaho National Laboratory (jon.christophersen@inl.gov).« less

NUTRIENT CRITERIA TECHNICAL GUIDANCE MANUAL - ESTUARINE AND COASTAL MARINE WATERS, OCTOBER 2001

EPA Science Inventory

Nutrient overenrichment is a major cause of water pollution in the United States. The purpose of this manual is to provide scientifically defensible technical guidance to assist States, authorized Tribes, and other governmental entities in developing numeric nutrient criteria fo...

Job Language Performance Requirements for MOS 31N, Tactical Circuit Controller, Reference Soldier’s Manual Dated 19 July 1979.

DTIC Science & Technology

1979-07-19

spontaneously or via a technical medium such as radio telephone. CONDITIONS: Given a comunicacive s~tuation (Appendices 4, 5, & 6 Soldier’s Manual) in any...I4u4 2 IL w0 - @& LI . - - Z . a 1"a j4 cw% w 0 -9 6-’A 9: . A .L IL .6 0OUA. W - C ’N -do 1.L - - U -Ic 4.p &a 2- of#4 A" wt a - La .-- 0. L - an...ff .m 4 a- z LA .a~m~IL 04 -0 ft ~ 6.: iU:-4t a ~ z 3 M ~ sa an Z. L. I .. . .. - a . ,.. - I. 0 4: C. - C6 :9 ’I.j ;.ft Mi ’f $-.’ % - f ;. .3 :w

Integrated Baseline System (IBS), Version 1. 03. [Chemical Stockpile Emergency Preparedness Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bailey, B.M.; Burford, M.J.; Downing, T.R.

The Integrated Baseline System (IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planing and analysis. This document is the user guide for the IBS and explains how to operate the IBS system. The fundamental function of the IBS is to provide tools that civilian emergency management personnel can use in developing emergency plans and in supporting emergency management activities to cope with a chemical-releasing event at a military chemical stockpile. Emergency management planners can evaluate concepts and ideas using the IBS system. The results of that experience can then be factoredmore » into refining requirements and plans. This document provides information for the general system user, and is the primary reference for the system features of the IBS. It is designed for persons who are familiar with general emergency management concepts, operations, and vocabulary. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other LBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary. IBS is a dynamic system. Its capabilities are in a state of continuing expansion and enhancement.« less

NASA Nebraska Space Grant 5 Year Proposal

NASA Technical Reports Server (NTRS)

Bowen, Brent D.; Vlasek, Karisa; Russell, Valerie; Woods, Sara; Webb, Cindy; Schaaf, Michaela; Vlasek, Scott; Wurdeman, Melissa; Lucas, Sarah; Tegeder, Amy

2004-01-01

The UNO Aviation Institute Monograph Series began in 1994 as a key component of the education outreach and information transfer missions of the Aviation Institute and the NASA Nebraska Space Grant & EPSCoR Programs. The series is an outlet for aviation materials to be indexed and disseminated through an efficient medium. Publications are welcome in all aspects of aviation. Publication formats may include, but are not limited to, conference proceedings, bibliographies, research reports, manuals, technical reports, and other documents that should be archived and indexed for future reference by the aviation and world wide communities.

Advanced Acoustic Model Technical Reference and User Manual

DTIC Science & Technology

2009-05-01

the source directed from the source to the receiver. Aspread = Geometrical spherical spreading loss (point source). Aatm = ANSI/ ISO atmospheric...426.1 1,013.4 27000 722 422.5 1,009.2 28000 691 418.9 1,004.9 29000 660 415.4 1,000.6 30000 631 411.8 996.4 A d v a n c e d A c o u s t i c M...sound by molecular relaxation processes in the atmosphere is computed according to the current ANSI/ ISO standard.28 Examples of the weather effects

Advanced Acoustic Model Technical Reference and User Manual

DTIC Science & Technology

2010-09-01

loss (point source). Aatm = ANSI/ ISO atmospheric absorption standard.28 Agrd = Ground reflection and attenuation losses, caused by the ground and the...433.2 1,021.8 25000 788 429.6 1,017.6 26000 754 426.1 1,013.4 27000 722 422.5 1,009.2 28000 691 418.9 1,004.9 29000 660 415.4 1,000.6 30000 631...ANSI/ ISO standard.28 Examples of the weather effects are described here. Consider a situation with winds approximately blowing from NW to SE. Figure 2

Amplification in Technical Manuals: Theory and Practice.

ERIC Educational Resources Information Center

Killingsworth, M. Jimmie; And Others

1989-01-01

Examines how amplification (rhetorical techniques by which discourse is extended to enhance its appeal and information value) tends to increase and improve the coverage, rationale, warnings, behavioral alternatives, examples, previews, and general emphasis of technical manuals. Shows how classical and modern rhetorical theories can be applied to…

HIGHLIGHTS FROM TECHNICAL MANUAL ON HOOD SYSTEM CAPTURE OF PROCESS FUGITIVE PARTICULATE EMISSIONS

EPA Science Inventory

The paper discusses a technical manual whose emphasis is on the design and evaluation of actual hood systems used to control various fugitive particulate emission sources. Engineering analyses of the most important hood types are presented to provide a conceptual understanding of...

A Comparison of Robotically Assisted Microsurgery versus Manual Microsurgery in Challenging Situations.

PubMed

Willems, Joost I P; Shin, Alexandra M; Shin, Delaney M; Bishop, Allen T; Shin, Alexander Y

2016-04-01

Microsurgery can be challenging secondary to orientation of the vessels, accessibility, or depth of the wound. Robotically assisted microsurgery reduces tremors and improves visualization and may improve the quality of anastomosis compared with traditional microsurgery. The purpose of this study was to compare robotically assisted microsurgery to traditional microsurgery in technically challenging situations with respect to time of anastomosis, quality of anastomosis, and Objective Structured Assessment of Technical Skills. Two investigators with no prior surgery or microsurgery experience performed 160 anastomoses on artificial microvessels after undergoing standardized traditional and robotically assisted microsurgery courses. Five different exposure groups were created with depths of 0, 10, and 20 cm and sidewall angles of 20 and 30 degrees. A comparison of 80 manual with 80 robotically assisted microsurgery anastomoses in different exposure groups was undertaken. The modified Objective Structured Assessment of Technical Skills scoring system, duration per anastomosis, and a subjective comfort scale were evaluated. In the most difficult exposure, Objective Structured Assessment of Technical Skills scores were similar in both groups (p = 0.98), the duration was higher in the manual group (p = 0.004), and the subjective comfort rating was higher in the robotically assisted microsurgery group (p < 0.001). In the easiest (0-cm depth, flat) exposure, Objective Structured Assessment of Technical Skills scores were higher in the manual group (p = 0.018) and the duration was longer in the robotically assisted microsurgery group (p = 0.008). Manual surgery was superior to robotically assisted microsurgery in technically easy exposures. In difficult exposures (greater depth and lower sidewall angles), however, robotically assisted microsurgery had a shorter surgery time and a higher comfort rating, with Objective Structured Assessment of Technical Skills scores similar to those assessing traditional microsurgery. Therapeutic, V.

Conversion of paper-based technical manuals to interactive electronic technical manuals

NASA Astrophysics Data System (ADS)

Kuo, Mu-Hsing

1999-12-01

An IETM is intended to be the functional equivalent of a paper-based Technical Manual (TM), and in most cases a total replacement for paper manual. In this paper, we will describe some of document image understanding technologies applied to the conversion of paper-based TMs to IETMs. Using these advanced technologies allow us to convert paper-based TMs to class 1/2 IETMs. However, these were not sufficient for an automated integrated logistics support system in the ROC Department of Defense. An advanced IETM system is therefore required. Such class 4/5 like IETM system could provide intelligent display of information and other user applications such as diagnostics, intelligent design and manufacturing, or computer-managed training. The author has developed some of the advanced functions, and examples will be shown to demonstrate the new aspect of IETMs.

Numerical Arc Segmentation Algorithm for a Radio Conference-NASARC (version 4.0) technical manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1988-01-01

The information contained in the NASARC (Version 4.0) Technical Manual and NASARC (Version 4.0) User's Manual relates to the Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) software development through November 1, 1988. The Technical Manual describes the NASARC concept and the algorithms used to implement the concept. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operation instructions. Significant revisions were incorporated in the Version 4.0 software over prior versions. These revisions have further enhanced the modeling capabilities of the NASARC procedure and provide improved arrangements of predetermined arcs within the geostationary orbits. Array dimensions within the software were structured to fit within the currently available 12 megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 4.0) allows worldwide planning problem scenarios to be accommodated within computer run time and memory constraints with enhanced likelihood and ease of solution.

Nonbinary quantification technique accounting for myocardial infarct heterogeneity: Feasibility of applying percent infarct mapping in patients.

PubMed

Mastrodicasa, Domenico; Elgavish, Gabriel A; Schoepf, U Joseph; Suranyi, Pal; van Assen, Marly; Albrecht, Moritz H; De Cecco, Carlo N; van der Geest, Rob J; Hardy, Rayphael; Mantini, Cesare; Griffith, L Parkwood; Ruzsics, Balazs; Varga-Szemes, Akos

2018-02-15

Binary threshold-based quantification techniques ignore myocardial infarct (MI) heterogeneity, yielding substantial misquantification of MI. To assess the technical feasibility of MI quantification using percent infarct mapping (PIM), a prototype nonbinary algorithm, in patients with suspected MI. Prospective cohort POPULATION: Patients (n = 171) with suspected MI referred for cardiac MRI. Inversion recovery balanced steady-state free-precession for late gadolinium enhancement (LGE) and modified Look-Locker inversion recovery (MOLLI) T 1 -mapping on a 1.5T system. Infarct volume (IV) and infarct fraction (IF) were quantified by two observers based on manual delineation, binary approaches (2-5 standard deviations [SD] and full-width at half-maximum [FWHM] thresholds) in LGE images, and by applying the PIM algorithm in T 1 and LGE images (PIM T1 ; PIM LGE ). IV and IF were analyzed using repeated measures analysis of variance (ANOVA). Agreement between the approaches was determined with Bland-Altman analysis. Interobserver agreement was assessed by intraclass correlation coefficient (ICC) analysis. MI was observed in 89 (54.9%) patients, and 185 (38%) short-axis slices. IF with 2, 3, 4, 5SDs and FWHM techniques were 15.7 ± 6.6, 13.4 ± 5.6, 11.6 ± 5.0, 10.8 ± 5.2, and 10.0 ± 5.2%, respectively. The 5SD and FWHM techniques had the best agreement with manual IF (9.9 ± 4.8%) determination (bias 1.0 and 0.2%; P = 0.1426 and P = 0.8094, respectively). The 2SD and 3SD algorithms significantly overestimated manual IF (9.9 ± 4.8%; both P < 0.0001). PIM LGE measured significantly lower IF (7.8 ± 3.7%) compared to manual values (P < 0.0001). PIM LGE , however, showed the best agreement with the PIM T1 reference (7.6 ± 3.6%, P = 0.3156). Interobserver agreement was rated good to excellent for IV (ICCs between 0.727-0.820) and fair to good for IF (0.589-0.736). The application of the PIM LGE technique for MI quantification in patients is feasible. PIM LGE , with its ability to account for voxelwise MI content, provides significantly smaller IF than any thresholding technique and shows excellent agreement with the T 1 -based reference. 2 Technical Efficacy: Stage 1 J. Magn. Reson. Imaging 2018. © 2018 International Society for Magnetic Resonance in Medicine.

The Job Training and Job Satisfaction Survey Technical Manual

ERIC Educational Resources Information Center

Schmidt, Steven W.

2004-01-01

Job training has become an important aspect of an employee's overall job experience. However, it is not often called out specifically on instruments measuring job satisfaction. This technical manual details the processes used in the development and validation of a survey instrument to measure job training satisfaction and overall job…

Emergency Care Skills for Occupational Health Nurses.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh. Occupational Information Center.

Designed for use in community colleges, technical colleges, and technical institutes, this manual contains a course for teaching emergency care skills to both licensed practical and registered nurses employed in occupational health. The manual consists of three sections. In section 1 the need for the course, its content, objectives, length,…

Improvement of mathematical models for simulation of vehicle handling : volume 7 : technical manual for the general simulation

DOT National Transportation Integrated Search

1980-03-01

This volume is the technical manual for the general simulation. Mathematical modelling of the vehicle and of the human driver is presented in detail, as are differences between the APL simulation and the current one. Information on model validation a...

29 CFR 1952.372 - Completion of developmental steps and certification.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Manual and Industrial Hygiene Field Operations Manual. The State has adopted subsequent Federal changes... intent to utilize and adopt the March 30, 1984 Federal Industrial Hygiene Technical Manual. These...

AGOR 28: SIO Shipyard Representative Bi-Weekly Progress Report

DTIC Science & Technology

2014-03-13

652/0 AGOR27 A055 TM Report - COMMERCIAL TECHNICAL MANUALS AND SUPPLEMENTAL DATA ( #368 DI-055 (TM) for 555c Kidde Fire Systems Fuel Shunt System ...TM) for 521 Fire Main System High-Level Manual) (R/ASR) 763/0 AGOR27 A055 TM Report - COMMERCIAL TECHNICAL MANUALS AND SUPPLEMENTAL DATA ( #384...Report - SINGLE SYSTEM VENDOR (SSV) DESIGN REVIEW AGENDAS AND MINUTES ( SSV #7 MINUTES AND SIGN-IN SHEET) (R/ASR) 47/0 AGOR27 A027- 41 DWG Report

Update of the Dutch manual for costing studies in health care

PubMed Central

Kanters, Tim A.; Bouwmans, Clazien A. M.; van der Linden, Naomi; Tan, Siok Swan; Hakkaart-van Roijen, Leona

2017-01-01

Objectives Dutch health economic guidelines include a costing manual, which describes preferred research methodology for costing studies and reference prices to ensure high quality studies and comparability between study outcomes. This paper describes the most important revisions of the costing manual compared to the previous version. Methods An online survey was sent out to potential users of the costing manual to identify topics for improvement. The costing manual was aligned with contemporary health economic guidelines. All methodology sections and parameter values needed for costing studies, particularly reference prices, were updated. An expert panel of health economists was consulted several times during the review process. The revised manual was reviewed by two members of the expert panel and by reviewers of the Dutch Health Care Institute. Results The majority of survey respondents was satisfied with content and usability of the existing costing manual. Respondents recommended updating reference prices and adding some particular commonly needed reference prices. Costs categories were adjusted to the international standard: 1) costs within the health care sector; 2) patient and family costs; and 3) costs in other sectors. Reference prices were updated to reflect 2014 values. The methodology chapter was rewritten to match the requirements of the costing manual and preferences of the users. Reference prices for nursing days of specific wards, for diagnostic procedures and nurse practitioners were added. Conclusions The usability of the costing manual was increased and parameter values were updated. The costing manual became integrated in the new health economic guidelines. PMID:29121647

Update of the Dutch manual for costing studies in health care.

PubMed

Kanters, Tim A; Bouwmans, Clazien A M; van der Linden, Naomi; Tan, Siok Swan; Hakkaart-van Roijen, Leona

2017-01-01

Dutch health economic guidelines include a costing manual, which describes preferred research methodology for costing studies and reference prices to ensure high quality studies and comparability between study outcomes. This paper describes the most important revisions of the costing manual compared to the previous version. An online survey was sent out to potential users of the costing manual to identify topics for improvement. The costing manual was aligned with contemporary health economic guidelines. All methodology sections and parameter values needed for costing studies, particularly reference prices, were updated. An expert panel of health economists was consulted several times during the review process. The revised manual was reviewed by two members of the expert panel and by reviewers of the Dutch Health Care Institute. The majority of survey respondents was satisfied with content and usability of the existing costing manual. Respondents recommended updating reference prices and adding some particular commonly needed reference prices. Costs categories were adjusted to the international standard: 1) costs within the health care sector; 2) patient and family costs; and 3) costs in other sectors. Reference prices were updated to reflect 2014 values. The methodology chapter was rewritten to match the requirements of the costing manual and preferences of the users. Reference prices for nursing days of specific wards, for diagnostic procedures and nurse practitioners were added. The usability of the costing manual was increased and parameter values were updated. The costing manual became integrated in the new health economic guidelines.

LLCEDATA and LLCECALC for Windows version 1.0, Volume 1: User`s manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

McFadden, J.G.

LLCEDATA and LLCECALC for Windows are user-friendly computer software programs that work together to determine the proper waste designation, handling, and disposition requirements for Long Length Contaminated Equipment (LLCE). LLCEDATA reads from a variety of data bases to produce an equipment data file (EDF) that represents a snapshot of both the LLCE and the tank it originates from. LLCECALC reads the EDF and a gamma assay (AV2) file that is produced by the Flexible Receiver Gamma Energy Analysis System. LLCECALC performs corrections to the AV2 file as it is being read and characterizes the LLCE. Both programs produce a varietymore » of reports, including a characterization report and a status report. The status report documents each action taken by the user, LLCEDATA, and LLCECALC. Documentation for LLCEDATA and LLCECALC for Windows is available in three volumes. Volume 1 is a user`s manual, which is intended as a quick reference for both LLCEDATA and LLCECALC. Volume 2 is a technical manual, and Volume 3 is a software verification and validation document.« less

An Information and Technical Manual for the Computer-Assisted Teacher Training System (CATTS).

ERIC Educational Resources Information Center

Semmel, Melvyn I.; And Others

The manual presents technical information on the computer assisted teacher training system (CATTS) which aims at developing a versatile and economical computer based teacher training system with the capability of providing immediate analysis and feedback of data relevant to teacher pupil transactions in a classroom setting. The physical…

Metric Supplement to Technical Drawing.

ERIC Educational Resources Information Center

Henschel, Mark

This manual is intended for use in training persons whose vocations involve technical drawing to use the metric system of measurement. It could be used in a short course designed for that purpose or for individual study. The manual begins with a brief discussion of the rationale for conversion to the metric system. It then provides a…

Financing Options for Home Care for Children with Chronic Illness and Severe Disability. Technical Assistance Manual.

ERIC Educational Resources Information Center

Ellison, Marsha Langer; And Others

This manual is intended to accompany technical assistance efforts aimed at improving selected states' home health care programs for children with chronic illness and severe disability. Summary descriptions of funding sources are presented, including purpose, eligibility guidelines, and services covered, as well as additional information as…

Utah's Best Project: Behavioral and Educational Strategies for Teachers. Technical Assistance Manuals, Edited Versions.

ERIC Educational Resources Information Center

Reavis, H. Kenton, Ed.; And Others

The 10 Technical Assistance Manuals compiled in this document were produced under cooperative agreements between the Utah State Office of Education and several school districts. Each module, an entity unto itself, is designed to assist classroom teachers with developing behavioral and educational strategies, concentrating on the objectives,…

Performance Problems in Service Contracting

DTIC Science & Technology

1988-01-01

technical manual for the U.S. Army. Contract types have run the gamut from firm fixed price to various forms of cost plus arrangements, and award has been...in a National Forest to producing a technical manual for the U.S. Army. Contract types have run the gamut from firm fixed price to various forms of

39 CFR 111.1 - Mailing Standards of the United States Postal Service, Domestic Mail Manual; incorporated by...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Service, Domestic Mail Manual; incorporated by reference of regulations governing domestic mail services..., Domestic Mail Manual; incorporated by reference of regulations governing domestic mail services. Section... by reference in this part, the Mailing Standards of the United States Postal Service, Domestic Mail...

KB3D Reference Manual. Version 1.a

NASA Technical Reports Server (NTRS)

Munoz, Cesar; Siminiceanu, Radu; Carreno, Victor A.; Dowek, Gilles

2005-01-01

This paper is a reference manual describing the implementation of the KB3D conflict detection and resolution algorithm. The algorithm has been implemented in the Java and C++ programming languages. The reference manual gives a short overview of the detection and resolution functions, the structural implementation of the program, inputs and outputs to the program, and describes how the program is used. Inputs to the program can be rectangular coordinates or geodesic coordinates. The reference manual also gives examples of conflict scenarios and the resolution outputs the program produces.

Marketing information: The technical report as product

NASA Technical Reports Server (NTRS)

Stoher, F. F.; Pinelli, T. E.

1981-01-01

Technical reports constitute a product, the primary means for communicating the results of research to the user. The Langley scientific and technical information (STI) review and evaluation project undertook a review of the technical report as an effective product for information communication. Style manuals describing theory and practice in technical report preparation; publication manuals covering such factors as design, layout, and type style; and copies of technical reports were obtained from industrial, academic, governmental, and research organizations. Based on an analysis of this material, criteria will be established for the report components, for the relationship of the components within the report context, and for the overall report organization. The criteria will be used as bench marks and compared with the publication standards currently used to prepare NASA technical reports.

76 FR 50414 - International Mail Manual; Incorporation by Reference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-15

... POSTAL SERVICE 39 CFR Part 20 International Mail Manual; Incorporation by Reference AGENCY: Postal... Standards of the United States Postal Service, International Mail Manual (IMM[supreg]) dated April 17, 2011.... SUPPLEMENTARY INFORMATION: The International Mail Manual was issued on April 17, 2011, and was updated with...

75 FR 34017 - International Mail Manual; Incorporation by Reference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-16

... POSTAL SERVICE 39 CFR Part 20 International Mail Manual; Incorporation by Reference AGENCY: Postal... Mailing Standards of the United States Postal Service, International Mail Manual (IMM[supreg]) and its..., (202) 268-3789. SUPPLEMENTARY INFORMATION: Issue 36 of the International Mail Manual was issued on May...

40 CFR Table A-1 to Subpart A of... - Summary of Applicable Requirements for Reference and Equivalent Methods for Air Monitoring of...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Methods for Air Monitoring of Criteria Pollutants Pollutant Ref. or equivalent Manual or automated Applicable part 50 appendix Applicable subparts of part 53 A B C D E F SO2 Reference Manual A Equivalent Manual ✓ ✓ Automated ✓ ✓ ✓ CO Reference Automated C ✓ ✓ Equivalent Manual ✓ ✓ Automated ✓ ✓ ✓ O3...

Numerical arc segmentation algorithm for a radio conference-NASARC (version 2.0) technical manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1987-01-01

The information contained in the NASARC (Version 2.0) Technical Manual (NASA TM-100160) and NASARC (Version 2.0) User's Manual (NASA TM-100161) relates to the state of NASARC software development through October 16, 1987. The Technical Manual describes the Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) concept and the algorithms used to implement the concept. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operating instructions. Significant revisions have been incorporated in the Version 2.0 software. These revisions have enhanced the modeling capabilities of the NASARC procedure while greatly reducing the computer run time and memory requirements. Array dimensions within the software have been structured to fit within the currently available 6-megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 2.0) allows worldwide scenarios to be accommodated within these memory constraints while at the same time effecting an overall reduction in computer run time.

Jobsite Supervisor Instructor's Manual for Electrical Apprentice Technical Training. Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

One hundred and sixteen lesson plans for a first, second, third and fourth year electrical apprentice technical training program are presented in this manual. The lesson plans are generally organized into four steps: introducing the lesson, presenting the lessons (e.g., demonstration), student application (use of worksheets), and checking and…

76 FR 48722 - Domestic Mail Manual; Incorporation by Reference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-09

... POSTAL SERVICE 39 CFR PART 111 Domestic Mail Manual; Incorporation by Reference AGENCY: Postal... 5, 2011, of the Mailing Standards of the United States Postal Service, Domestic Mail Manual (DMM... the Domestic Mail Manual (DMM) was issued on July 5, 2011. This Issue of the DMM contains all Postal...

77 FR 45246 - Domestic Mail Manual; Incorporation by Reference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-31

... POSTAL SERVICE 39 CFR Part 111 Domestic Mail Manual; Incorporation by Reference AGENCY: Postal... Standards of the United States Postal Service, Domestic Mail Manual (DMM[supreg]) dated June 24, 2012, and...) 268-3789. SUPPLEMENTARY INFORMATION: The most recent issue of the Domestic Mail Manual (DMM) is dated...

77 FR 64724 - International Mail Manual; Incorporation by Reference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-23

... POSTAL SERVICE 39 CFR Part 20 International Mail Manual; Incorporation by Reference AGENCY: Postal... Standards of the United States Postal Service, International Mail Manual (IMM[supreg]) dated June 24, 2012... International Mail Manual was issued on June 24, 2012, and was updated with postal bulletin revisions through...

[Manual rotation of occiput posterior presentation].

PubMed

Le Ray, C; Goffinet, F

2011-10-01

Delivery in occiput posterior position is associated with a higher risk of cesarean section, operative vaginal delivery and severe perineal tears. We report the technic of manual rotation described by Tarnier and Chantreuil and used daily in our maternity center. Only five studies were published on this topic; all of them demonstrate that manual rotation decreases the risk of cesarean section. Moreover, it could decrease the risk of prolonged second stage, chorioamnionitis and third and fourth degree tears in comparison with expectant management. However, manual rotation is associated with a two-fold higher risk of cervical and vaginal lacerations. Manual rotation performed with an adequate technic is an efficient and safe manœuvre to avoid complications associated with occiput posterior vaginal delivery. Copyright © 2011. Published by Elsevier SAS.

California Publicly-Owned Utilities (POUs) – LBNL ‘Beyond Widgets’ Project. Task: ambient lighting and occupancy-based plug load control. System Program Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, Alastair; Mathew, Paul A.; Regnier, Cynthia

This program manual contains detailed technical information for implementing an incentive program for task-ambient lighting and occupancy-based plug load control. This manual was developed by Lawrence Berkeley National Laboratory, in collaboration with the California Publicly-Owned Utilities (CA POUs) as a partner in the ‘Beyond Widgets’ program funded by the U.S. Department of Energy Building Technologies Office. The primary audience for this manual is the program staff of the various CA POUs. It may also be used by other utility incentive programs to help develop similar programs. It is anticipated that the content of this manual be utilized by the CAmore » POU staff for developing related documents such as the Technical Resource Manual and other filings pertaining to the rollout of an energy systems-based rebate incentive program.« less

The Conference Proceedings of the 2003 Air Transport Research Society (ATRS) World Conference, Volume 2

NASA Technical Reports Server (NTRS)

Bowen, Brent (Editor); Gudmundsson, Sveinn (Editor); Oum, Tae (Editor)

2003-01-01

The UNO Aviation Institute Monograph Series began in 1994 as a key component of the education outreach and information transfer missions of the Aviation Institute and the NASA Nebraska Space Grant & EPSCoR Programs. The series is an outlet for aviation materials to be indexed and disseminated through an efficient medium. Publications are welcome in all aspects of aviation. Publication formats may include, but are not limited to, conference proceedings, bibliographies, research reports, manuals, technical reports, and other documents that should be archived and indexed for future reference by the aviation and world wide communities.

Tutorial for the software tools mail system - MSG

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sventek, V.A.

1984-10-01

This manual was written with two purposes in mind: (1) to get started using the system quickly; and (2) to explain the more advanced features of the system needed when the mail load gets heavier and the time to spend dealing with it gets shorter. The first section shows you how to use the simplest form of each command, giving just enough information to use the mail system comfortably and still be productive. The second section defines additional terms and describes the more technical aspects of the system, and should be used as a reference guide.

Aeronautics Education, Research, and Industry Alliance (AERIAL) Year 2 Report and Year 3 Proposal

NASA Technical Reports Server (NTRS)

Bowen, Brent D.; Box, Richard C.; Fink, Mary M.; Gogos, George; Lehrer, Henry R.; Narayanan, Ram M.; Nickerson, Jocelyn S.; Tarry, Scott E.; Vlasek, Karisa D.

2003-01-01

The UNO Aviation Institute Monograph Series began in 1994 as a key component of the education outreach and information transfer missions of the Aviation Institute and the NASA Nebraska Space Grant & EPSCoR Programs. The series is an outlet for aviation materials to be indexed and disseminated through an efficient medium. Publications are welcome in all aspects of aviation. Publication formats may include, but are not limited to, conference proceedings, bibliographies, research reports, manuals, technical reports, and other documents that should be archived and indexed for future reference by the aviation and world wide communities.

Nebraska Initiative for Aerospace Research and Industrial Development (NIARID)

NASA Technical Reports Server (NTRS)

Bowen, Brent; Reichenbach, Steve; Ianno, Ned; Farr, Lynne; Tarry, Scott; Narayanan, Ram; Lehrer, Henry

2002-01-01

The UNO Aviation Institute Monograph Series began in 1994 as a key component of the education outreach and information transfer missions of the Aviation Institute and the NASA Nebraska Space Grant & EPSCoR Programs. The series is an outlet for aviation materials to be indexed and disseminated through an efficient medium. Publications are welcome in all aspects of aviation. Publication formats may include, but are not limited to, conference proceedings, bibliographies, research reports, manuals, technical reports, and other documents that should be archived and indexed for future reference by the aviation and world wide communities.

NASA EPSCoR Nebraska Preparation Grant: Year 1

NASA Technical Reports Server (NTRS)

Bowen, Brent D.; Holmes, Bruce J.; Bartle, John R.; Gogos, George; Hinton, David W.; Lehrer, Henry R.; Moussavi, Massoum; Reed, B. J.; Schaaf, Michaela M.; Smith, Russell L.;

Integrated Baseline System (IBS), Version 1.03. User guide: Chemical Stockpile Emergency Preparedness Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bailey, B.M.; Burford, M.J.; Downing, T.R.

The Integrated Baseline System (IBS), operated by the Federal Emergency Management Agency (FEMA), is a system of computerized tools for emergency planing and analysis. This document is the user guide for the IBS and explains how to operate the IBS system. The fundamental function of the IBS is to provide tools that civilian emergency management personnel can use in developing emergency plans and in supporting emergency management activities to cope with a chemical-releasing event at a military chemical stockpile. Emergency management planners can evaluate concepts and ideas using the IBS system. The results of that experience can then be factoredmore » into refining requirements and plans. This document provides information for the general system user, and is the primary reference for the system features of the IBS. It is designed for persons who are familiar with general emergency management concepts, operations, and vocabulary. Although the IBS manual set covers basic and advanced operations, it is not a complete reference document set. Emergency situation modeling software in the IBS is supported by additional technical documents. Some of the other LBS software is commercial software for which more complete documentation is available. The IBS manuals reference such documentation where necessary. IBS is a dynamic system. Its capabilities are in a state of continuing expansion and enhancement.« less

Technical report writing

NASA Technical Reports Server (NTRS)

Vidoli, Carol A.

1992-01-01

This manual covers the fundamentals of organizing, writing, and reviewing NASA technical reports. It was written to improve the writing skills of LeRC technical authors and the overall quality of their reports.

Effective Instructional Leadership Act--Technical Assistance Manual for Instructional Leaders, and Training Program Providers, July 1, 2004-June 30, 2006.

ERIC Educational Resources Information Center

Kentucky Department of Education, 2004

2004-01-01

The Kentucky Department of Education, Office of Leadership and School Improvement developed this revised and updated technical assistance manual for the 2004-2006 Effective Instructional Leadership Act (EILA) cycle to assist local educators as they strive to improve the quality and effectiveness of their leadership skills and to assist districts…

Instructor's Manual for Electrical Apprentice Technical Training. Series No. D (Fourth Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Twenty-seven lesson plans for a fourth-year electrical apprentice technical training program are presented in this instructor's manual. Also included are student worksheets and information sheets for each lesson, and copies of unit tests. (Answers to the worksheets and tests are provided.) The lesson plans are generally organized into four steps:…

Instructor's Manual for Electrical Apprentice Technical Training. Series No. A (First Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Thirty-six lesson plans for the first of a four-year electrical apprentice technical training program are presented in this instructor's manual. Also included are student worksheets and information sheets for each lesson, and copies of unit tests. (Answers to the worksheets and tests are provided.) The lesson plans are generally organized into…

Instructor's Manual for Electrical Apprentice Technical Training. Series No. B (Second Year). Revised to Meet 1978 Electrical Code.

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

Twenty-eight lesson plans for the second year of a four-year electrical apprentice technical training program are presented in this instructor's manual. Also included are student worksheets and information sheets for each lesson, and copies of unit tests. (Answers to the worksheets and tests are provided.) The lesson plans are generally organized…

FIELD CHECK MANUAL FOR LANGUAGE LABORATORIES, A SERIES OF TESTS WHICH A NON-TECHNICAL PERSON CAN CONDUCT TO VERIFY SPECIFICATIONS.

ERIC Educational Resources Information Center

GRITTNER, FRANK; PAVLAT, RUSSELL

IN ORDER TO ASSIST NON-TECHNICAL PEOPLE IN SCHOOLS TO CONDUCT A FIELD CHECK OF LANGUAGE LABORATORY EQUIPMENT BEFORE THEY MAKE FINAL PAYMENTS, THIS MANUAL OFFERS CRITERIA, TESTS, AND METHODS OF SCORING THE QUALITY OF THE EQUIPMENT. CHECKLISTS ARE PROVIDED FOR EVALUATING CONSOLE FUNCTIONS, TAPE RECORDERS, AMPLIFIERS, SOUND QUALITY (INCLUDING…

Exploring Perceptions and Attitudes towards Teaching and Learning Manual Technical Drawing in a Digital Age

ERIC Educational Resources Information Center

McLaren, Susan Valerie

2008-01-01

This paper examines the place of manual technical drawing in the 21st century by discussing the perceived value and relevance of teaching school students how to draw using traditional instruments, in a world of computer aided drafting (CAD). Views were obtained through an e-survey, questionnaires and structured interviews. The sample groups…

Vocational-Technical Physics Project. Instructor's Manual. Field Test Edition.

ERIC Educational Resources Information Center

Forsyth Technical Inst., Winston-Salem, NC.

This instructor's manual in vocational physics consists of five modules: Jacks, Thermometers, The Alternator, The Pool Table, and The Radiator. It is an individualized approach, designed for use with accompanying student manuals on each of the individual modules. Each module in the instructor's manual consists of a general description plus an…

CD-ROM Troubleshooting Manual: Support for Reference Desk Librarians.

ERIC Educational Resources Information Center

Nipp, Deanna; Shamy, Salwa

1992-01-01

Discusses the impact of CD-ROM services on reference departments and describes the development of a troubleshooting manual for the Library of Science and Medicine at Rutgers University. The seven steps followed in writing the manual are presented, and it is noted that it has proved to be an effective support for reference and CD-ROM services. (21…

Guide to listing references.

DOT National Transportation Integrated Search

2005-01-01

The introduction of listing references. It introduces the reference of printed sources, CD-ROMs, websites, unpublished papers and program manuals, tapes, or other documentation for models. Meanwhile, it describes some examples to use Chicago Manual o...

Starting and Operating Live Virtual Reference Services: A How-To-Do-It Manual for Librarians. How-To-Do-It Manuals for Librarians, Number 118.

ERIC Educational Resources Information Center

Meola, Marc; Stormont, Sam

This guide discusses the essentials of live virtual reference, preparing for virtual reference, and implementing and incorporating virtual reference. Chapter 1, "Understanding Live Virtual Reference," lays out what virtual reference is and how it compares to other forms of reference. Chapter 2, "Offering Live Virtual Reference," presents ten…

Guide of good practices for occupational radiological protection in plutonium facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-06-01

This Technical Standard (TS) does not contain any new requirements. Its purpose is to provide guides to good practice, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium. the technical rationale is given to allow US Department of Energy (DOE) health physicists to adapt the recommendations to similar situations throughout the DOE complex. Generally, DOE contractor health physicists will be responsible to implement radiation protection activities at DOE facilities and DOE health physicists will be responsible for oversight of those activities. This guidance is meant to be useful for both efforts. This TSmore » replaces PNL-6534, Health Physics Manual of Good Practices for Plutonium Facilities, by providing more complete and current information and by emphasizing the situations that are typical of DOE`s current plutonium operations; safe storage, decontamination, and decommissioning (environmental restoration); and weapons disassembly.« less

[Ageing and work: technical standards].

PubMed

De Vito, G; Riva, M A; Meroni, R; Cesana, G C

2010-01-01

Over the last few years, studies on the relationship between ageing and work have attracted growing interest due to the increased probability among workers of developing major health problems as a consequence of ageing of the working population. Negative outcomes for health are possible when an age-related imbalance appears between physical workload and physical work capacity. Interventions based on workload reductions should help to keep workers on the job for as long as allowed by law. Reference masses by age and sex are suggested by the technical standards of the ISO 11228 series, which are also quoted by Italian law D.Lgs. 81/2008, and EN 1005 series, which recommend limits valid also for manual material handling, and pushing and pulling. Decreasing low back pain prevalence or recurrence, in an ageing population with high prevalence of back disorders, could be more effective than many other approaches to enhance workers' quality of life and consequently maintain and improve workers' performance.

Solid waste projection model: Model version 1. 0 technical reference manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkins, M.L.; Crow, V.L.; Buska, D.E.

1990-11-01

The Solid Waste Projection Model (SWPM) system is an analytical tool developed by Pacific Northwest Laboratory (PNL) for Westinghouse Hanford Company (WHC). The SWPM system provides a modeling and analysis environment that supports decisions in the process of evaluating various solid waste management alternatives. This document, one of a series describing the SWPM system, contains detailed information regarding the software utilized in developing Version 1.0 of the modeling unit of SWPM. This document is intended for use by experienced software engineers and supports programming, code maintenance, and model enhancement. Those interested in using SWPM should refer to the SWPM Modelmore » User's Guide. This document is available from either the PNL project manager (D. L. Stiles, 509-376-4154) or the WHC program monitor (B. C. Anderson, 509-373-2796). 8 figs.« less

Steps to standardization and validation of hippocampal volumetry as a biomarker in clinical trials and diagnostic criteria for Alzheimer’s disease

PubMed Central

Jack, Clifford R; Barkhof, Frederik; Bernstein, Matt A; Cantillon, Marc; Cole, Patricia E; DeCarli, Charles; Dubois, Bruno; Duchesne, Simon; Fox, Nick C; Frisoni, Giovanni B; Hampel, Harald; Hill, Derek LG; Johnson, Keith; Mangin, Jean-François; Scheltens, Philip; Schwarz, Adam J; Sperling, Reisa; Suhy, Joyce; Thompson, Paul M; Weiner, Michael; Foster, Norman L

2012-01-01

Background The promise of Alzheimer’s disease (AD) biomarkers has led to their incorporation in new diagnostic criteria and in therapeutic trials; however, significant barriers exist to widespread use. Chief among these is the lack of internationally accepted standards for quantitative metrics. Hippocampal volumetry is the most widely studied quantitative magnetic resonance imaging (MRI) measure in AD and thus represents the most rational target for an initial effort at standardization. Methods and Results The authors of this position paper propose a path toward this goal. The steps include: 1) Establish and empower an oversight board to manage and assess the effort, 2) Adopt the standardized definition of anatomic hippocampal boundaries on MRI arising from the EADC-ADNI hippocampal harmonization effort as a Reference Standard, 3) Establish a scientifically appropriate, publicly available Reference Standard Dataset based on manual delineation of the hippocampus in an appropriate sample of subjects (ADNI), and 4) Define minimum technical and prognostic performance metrics for validation of new measurement techniques using the Reference Standard Dataset as a benchmark. Conclusions Although manual delineation of the hippocampus is the best available reference standard, practical application of hippocampal volumetry will require automated methods. Our intent is to establish a mechanism for credentialing automated software applications to achieve internationally recognized accuracy and prognostic performance standards that lead to the systematic evaluation and then widespread acceptance and use of hippocampal volumetry. The standardization and assay validation process outlined for hippocampal volumetry is envisioned as a template that could be applied to other imaging biomarkers. PMID:21784356

AVAILABLE INSTRUCTIONAL MATERIALS.

ERIC Educational Resources Information Center

Indiana State Univ., Terre Haute.

THE INSTRUCTIONAL MATERIALS INCLUDE PROGRAM BROCHURES, CHARTS, COURSE OUTLINES, OVERHEAD TRANSPARENCIES, ASSIGNMENT SHEETS, STUDENT MANUALS, TEACHER MANUALS, TECHNICAL INFORMATION, AND RELATED INFORMATION IN VOCATIONAL EDUCATION. A BRIEF NOTE DESCRIBES EACH. (EM)

Internal dosimetry technical basis manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-12-20

The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophicalmore » discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.« less

IPM for Pennsylvania Schools: A How-To Manual.

ERIC Educational Resources Information Center

Martz, Eston, Ed.

This manual presents practical advice on planning and adopting an integrated pest management (IPM) program for Pennsylvania educational facilities. The manual covers how to implement a school IPM, school IPM operational information for the school administrator, and technical information for Pennsylvania schools concerning various pests found in…

Manual of Accreditation Standards for Adventure Programs 1995.

ERIC Educational Resources Information Center

Williamson, John E., Comp.; Gass, Michael, Comp.

This manual presents standards for adventure education programs seeking accreditation from the Association for Experiential Education. The manual is set up sequentially, focusing both on objective standards such as technical risk management aspects, and on subjective standards such as teaching approaches used in programs. Chapter titles provide…

Small Enterprise Development Pre-Service Training Manual. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-42.

ERIC Educational Resources Information Center

Pragma Corp., Falls Church, VA.

This manual is intended to assist Peace Corps trainers in providing preservice technical training in small enterprise development. The manual includes a total of 40 training sessions divided among 10 learning modules. The following topics are covered: the main principles of small enterprise development; Peace Corps volunteers as small enterprise…

Policy Level Information on Logistics-Oriented Research.

DTIC Science & Technology

1980-08-01

Logistics Planann and System Long-Range Management Technology Planning Evaluation of Rold Miasion of Support Organizacion Effective Cross-Service Policies...guidelines, solution procedures, etc. The documentation format (technical report, user’s manual , briefing slides, etc.) also falls into this category...CHECK AT LEAST ONE) PhD Dissertation SMaster’s Thesis 7 Memorandum L Briefing Q Technical Report 7 Software Product O Hardware Product Q7 User’s Manual

39 CFR 20.1 - International Mail Manual; incorporation by reference.

Code of Federal Regulations, 2010 CFR

2010-07-01

... reference. 20.1 Section 20.1 Postal Service UNITED STATES POSTAL SERVICE INTERNATIONAL MAIL INTERNATIONAL POSTAL SERVICE § 20.1 International Mail Manual; incorporation by reference. (a) Section 552(a) of Title... provided in this part, the U.S. Postal Service hereby incorporates by reference its International Mail...

Analysis of on-line clinical laboratory manuals and practical recommendations.

PubMed

Beckwith, Bruce; Schwartz, Robert; Pantanowitz, Liron

2004-04-01

On-line clinical laboratory manuals are a valuable resource for medical professionals. To our knowledge, no recommendations currently exist for their content or design. To analyze publicly accessible on-line clinical laboratory manuals and to propose guidelines for their content. We conducted an Internet search for clinical laboratory manuals written in English with individual test listings. Four individual test listings in each manual were evaluated for 16 data elements, including sample requirements, test methodology, units of measure, reference range, and critical values. Web sites were also evaluated for supplementary information and search functions. We identified 48 on-line laboratory manuals, including 24 academic or community hospital laboratories and 24 commercial or reference laboratories. All manuals had search engines and/or test indices. No single manual contained all 16 data elements evaluated. An average of 8.9 (56%) elements were present (range, 4-14). Basic sample requirements (specimen and volume needed) were the elements most commonly present (98% of manuals). The frequency of the remaining data elements varied from 10% to 90%. On-line clinical laboratory manuals originate from both hospital and commercial laboratories. While most manuals were user-friendly and contained adequate specimen-collection information, other important elements, such as reference ranges, were frequently absent. To ensure that clinical laboratory manuals are of maximal utility, we propose the following 13 data elements be included in individual test listings: test name, synonyms, test description, test methodology, sample requirements, volume requirements, collection guidelines, transport guidelines, units of measure, reference range, critical values, test availability, and date of latest revision.

Reference Manual for Machine-Readable Bibliographic Descriptions. Second Revised Edition.

ERIC Educational Resources Information Center

Dierickx, H., Ed.; Hopkinson, A., Ed.

A product of the UNISIST International Centre for Bibliographic Descriptions (UNIBIB), this reference manual presents a standardized communication format for the exchange of machine-readable bibliographic information between bibliographic databases or other types of bibliographic information services, including libraries. The manual is produced in…

Computer-Assisted Search Of Large Textual Data Bases

NASA Technical Reports Server (NTRS)

Driscoll, James R.

1995-01-01

"QA" denotes high-speed computer system for searching diverse collections of documents including (but not limited to) technical reference manuals, legal documents, medical documents, news releases, and patents. Incorporates previously available and emerging information-retrieval technology to help user intelligently and rapidly locate information found in large textual data bases. Technology includes provision for inquiries in natural language; statistical ranking of retrieved information; artificial-intelligence implementation of semantics, in which "surface level" knowledge found in text used to improve ranking of retrieved information; and relevance feedback, in which user's judgements of relevance of some retrieved documents used automatically to modify search for further information.

MARSAME Manual and Resources

EPA Pesticide Factsheets

MARSAME provides technical information on survey approaches to determine proper disposition of materials and equipment (M&E). MARSAME is a supplement to the Multi-Agency Radiation Survey and Site Investigation Manual (MARSSIM).

Hanford Waste Vitrification Plant technical manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larson, D.E.; Watrous, R.A.; Kruger, O.L.

1996-03-01

A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. Themore » immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version.« less

An Open-Source Label Atlas Correction Tool and Preliminary Results on Huntingtons Disease Whole-Brain MRI Atlases

PubMed Central

Forbes, Jessica L.; Kim, Regina E. Y.; Paulsen, Jane S.; Johnson, Hans J.

2016-01-01

The creation of high-quality medical imaging reference atlas datasets with consistent dense anatomical region labels is a challenging task. Reference atlases have many uses in medical image applications and are essential components of atlas-based segmentation tools commonly used for producing personalized anatomical measurements for individual subjects. The process of manual identification of anatomical regions by experts is regarded as a so-called gold standard; however, it is usually impractical because of the labor-intensive costs. Further, as the number of regions of interest increases, these manually created atlases often contain many small inconsistently labeled or disconnected regions that need to be identified and corrected. This project proposes an efficient process to drastically reduce the time necessary for manual revision in order to improve atlas label quality. We introduce the LabelAtlasEditor tool, a SimpleITK-based open-source label atlas correction tool distributed within the image visualization software 3D Slicer. LabelAtlasEditor incorporates several 3D Slicer widgets into one consistent interface and provides label-specific correction tools, allowing for rapid identification, navigation, and modification of the small, disconnected erroneous labels within an atlas. The technical details for the implementation and performance of LabelAtlasEditor are demonstrated using an application of improving a set of 20 Huntingtons Disease-specific multi-modal brain atlases. Additionally, we present the advantages and limitations of automatic atlas correction. After the correction of atlas inconsistencies and small, disconnected regions, the number of unidentified voxels for each dataset was reduced on average by 68.48%. PMID:27536233

An Open-Source Label Atlas Correction Tool and Preliminary Results on Huntingtons Disease Whole-Brain MRI Atlases.

PubMed

Forbes, Jessica L; Kim, Regina E Y; Paulsen, Jane S; Johnson, Hans J

2016-01-01

The creation of high-quality medical imaging reference atlas datasets with consistent dense anatomical region labels is a challenging task. Reference atlases have many uses in medical image applications and are essential components of atlas-based segmentation tools commonly used for producing personalized anatomical measurements for individual subjects. The process of manual identification of anatomical regions by experts is regarded as a so-called gold standard; however, it is usually impractical because of the labor-intensive costs. Further, as the number of regions of interest increases, these manually created atlases often contain many small inconsistently labeled or disconnected regions that need to be identified and corrected. This project proposes an efficient process to drastically reduce the time necessary for manual revision in order to improve atlas label quality. We introduce the LabelAtlasEditor tool, a SimpleITK-based open-source label atlas correction tool distributed within the image visualization software 3D Slicer. LabelAtlasEditor incorporates several 3D Slicer widgets into one consistent interface and provides label-specific correction tools, allowing for rapid identification, navigation, and modification of the small, disconnected erroneous labels within an atlas. The technical details for the implementation and performance of LabelAtlasEditor are demonstrated using an application of improving a set of 20 Huntingtons Disease-specific multi-modal brain atlases. Additionally, we present the advantages and limitations of automatic atlas correction. After the correction of atlas inconsistencies and small, disconnected regions, the number of unidentified voxels for each dataset was reduced on average by 68.48%.

Guidance Manual: Asbestos Operations & Maintenance Work Practices. Second Edition.

ERIC Educational Resources Information Center

National Inst. of Building Sciences, Washington, DC.

This technical manual provides detailed guidance to building owners, asbestos program managers, and operations and maintenance (O&M) workers for managing asbestos-containing materials (ACM) in buildings. The manual addresses four different types of ACM found in buildings and three different levels of precaution which may be warranted by…

Auto Mechanics; Methodology. Technical Instruction Manual.

ERIC Educational Resources Information Center

Systems Operation Support, Inc., King of Prussia, PA.

This student instruction manual was written in conformance with selected criteria for programed instruction books as developed previously for various military training courses. The manual was developed as a part of "A Study of the Effectiveness of a Military-Type Computer-Based Instructional System When Used in Civilian High School Courses in…

Operation, Maintenance and Management of Wastewater Treatment Facilities: A Bibliography of Technical Documents.

ERIC Educational Resources Information Center

Himes, Dottie

This is an annotated bibliography of wastewater treatment manuals. Fourteen manuals are abstracted including: (1) A Planned Maintenance Management System for Municipal Wastewater Treatment Plants; (2) Anaerobic Sludge Digestion, Operations Manual; (3) Emergency Planning for Municipal Wastewater Treatment Facilities; (4) Estimating Laboratory Needs…

75 FR 28858 - Agency Information Collection (Service Data Manual) Activities Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-24

... operator's manuals and maintenance/repair manuals when technical medical equipment and devices, or... U.S.C. 3501-3521), this notice announces that the Office of Acquisition and Materiel Management... Management and Budget (OMB) for review and comment. The PRA submission describes the nature of the...

Quartermaster 1 and C, Rate Training Manual.

ERIC Educational Resources Information Center

Naval Personnel Program Support Activity, Washington, DC.

The technical subject matter of the Quartermaster rating is presented in this training manual written to prepare men of the Navy and Naval Reserve for advancement examinations. The manual includes eleven chapters. Discussed are commonly used methods and procedures of operating magnetic compasses and gyrocompasses, determining a ship's position,…

22 CFR 126.17 - Exemption pursuant to the Defense Trade Cooperation Treaty between the United States and the...

Code of Federal Regulations, 2013 CFR

2013-04-01

...; (ii) Technical data (including data packages, technical papers, manuals, presentations, specifications... person who receives defense articles, including technical data, but who does not have access to such... (other than technical data) shall be individually labeled with the appropriate identification detailed in...

22 CFR 126.16 - Exemption pursuant to the Defense Trade Cooperation Treaty between the United States and Australia.

Code of Federal Regulations, 2014 CFR

2014-04-01

... section; (ii) Technical data (including data packages, technical papers, manuals, presentations..., defense articles, including technical data, for the sole purpose of effecting onward movement to members... (other than technical data) shall be individually labeled with the appropriate identification detailed in...

General Principles for Manual/Simultaneous Communication (M/SC) Instruction.

ERIC Educational Resources Information Center

Caccamise, Frank; And Others

1978-01-01

The article discusses principles in use at the National Technical Institute for the Deaf in planning and implementing Manual/Simultaneous Communication instruction for hearing impaired and deaf individuals. (PHR)

Energy Supply Options for Modernizing Army Heating Systems

DTIC Science & Technology

1999-01-01

Army Regulation (AR) 420-49, Heating, Energy Selection and Fuel Storage, Distribution, and Dispens- ing Systems and Technical Manual (TM) 5-650...analysis. 26 USACERL TR 99/23 HEATMAP uses the AutoLISP program in AutoCAD to take the graphical input to populate a Microsoft® Access database in...of 1992, Subtitle F, Federal Agency Energy Man- agement. Technical Manual (TM) 5-650, Repairs and Utilities: Central Boiler Plants (HQDA, 13 October

CACDA Jiffy War Game Technical Manual. Part 1: Methodology

DTIC Science & Technology

1977-03-01

Systems Analysis Office (Mr Tyburski) Fort Monmout’.h, NJ 07703 Commander 1* USAISD ATTN: ATISE-TD-TS-CD (LT Boyer) Fort Deven , MASS 01433 Commander 2...Developments Activity Fort Leavenworth, Kansas 66027 CACDA JIFFY WAR GAME TECHNICAL MANUAL Part 1: Methodology by Timothy J. Bailey and Gerald A. Martin ACN...ComrbatDevelopments Activity (CACDA), Fort Leavenworth,i-Xsas," for scenario devel- opment and force structure evaluation. The Jiffy Game computer

--No Title--

Science.gov Websites

Search Search Home SH Reference Manual E19 Documentation Program Management Training/Drills Other Dataweb National Water Information System Database SH Reference Manual, E-19 Docs, Program Management

NPDES Permit Writers' Manual for Concentrated Animal Feeding Operations

EPA Pesticide Factsheets

This manual is designed to provide general information on the CWA and NPDES requirements for CAFOs, explain CAFO permitting, and provide technical information to understand options for nutrients management planning.

Reference Manual on Making School Climate Improvements. School Climate Improvement Resource Package, 2017

ERIC Educational Resources Information Center

Yoder, N.; Darling-Churchill, K.; Colombi, G. D.; Ruddy, S.; Neiman, S.; Chagnon, E.; Mayo, R.

2017-01-01

This reference manual identifies five overarching sets of activities for improving school climate, with the goal of improving student outcomes (e.g., achievement, attendance, behaviors, and skills). These sets of activities help to initiate, implement, and sustain school climate improvements. For each activity set, the manual presents a clear…

METRO-APEX Volume 18.1: Legal Reference Manual. Revised.

ERIC Educational Resources Information Center

University of Southern California, Los Angeles. COMEX Research Project.

The Legal Reference Manual is one of a set of twenty-one manuals used in METRO-APEX 1974, a computerized college and professional level, computer-supported, role-play, simulation exercise of a community with "normal" problems. Stress is placed on environmental quality considerations. APEX 1974 is an expansion of APEX--Air Pollution…

Reference Manual for Machine-Readable Descriptions of Research Projects and Institutions.

ERIC Educational Resources Information Center

Dierickx, Harold; Hopkinson, Alan

This reference manual presents a standardized communication format for the exchange between databases or other information services of machine-readable information on research in progress. The manual is produced in loose-leaf format to facilitate updating. Its first section defines in broad outline the format and content of applicable records. A…

TRENDS: A flight test relational database user's guide and reference manual

NASA Technical Reports Server (NTRS)

Bondi, M. J.; Bjorkman, W. S.; Cross, J. L.

1994-01-01

This report is designed to be a user's guide and reference manual for users intending to access rotocraft test data via TRENDS, the relational database system which was developed as a tool for the aeronautical engineer with no programming background. This report has been written to assist novice and experienced TRENDS users. TRENDS is a complete system for retrieving, searching, and analyzing both numerical and narrative data, and for displaying time history and statistical data in graphical and numerical formats. This manual provides a 'guided tour' and a 'user's guide' for the new and intermediate-skilled users. Examples for the use of each menu item within TRENDS is provided in the Menu Reference section of the manual, including full coverage for TIMEHIST, one of the key tools. This manual is written around the XV-15 Tilt Rotor database, but does include an appendix on the UH-60 Blackhawk database. This user's guide and reference manual establishes a referrable source for the research community and augments NASA TM-101025, TRENDS: The Aeronautical Post-Test, Database Management System, Jan. 1990, written by the same authors.

Advanced On-the-Job Training System: System Specification

DTIC Science & Technology

1990-05-01

3.1.5.2.10 Evaluation Subsystem spotfor the Traking Devopment and Deliery Subsystem ..... 22 3.1.5.2.11 TrIning Development=dDelivery Subsystem sL...e. Alsys Ada compiler f. Ethernet Local Area Network reference manual(s) g. Infotron 992 network reference manual(s) h. Computer Program Source...1989 a. Daily check of mainframe components, including all elements critical to support the terminal network . b. Restoration of mainframe equipment

Direct measurements and systematic observations of physical workload among medical secretaries, furniture removers and male and female reference populations.

PubMed

Karlqvist, L; Winkel, J; Wiktorin, C

1994-10-01

The aim of this investigation was to collect quantitative information about the occurrence of manual materials handling and working postures in working life. Direct technical recordings and systematic observations by trained ergonomists were used throughout a whole working day on 12 male furniture removers, 13 female medical secretaries, 27 males and 45 females randomly sampled from the working population in the Stockholm area. A quantitative job exposure profile was obtained by weighting together exposure data obtained by observation of tasks occurring during a normal working week. The results showed no major differences in physical exposures between the male and female reference populations. The medical secretaries spent less time than the female population kneeling/squatting and longer time than any other group with repetitive hand movements. Exposure data for task and job should be clearly distinguished.

Manual of an Instructional Program in Dental Assisting.

ERIC Educational Resources Information Center

Gilbert, Maud R., Ed.; Fiedler, Belle, Ed.

This manual is for administrator and teacher use in planning a program and individual courses for adults in dental assisting in vocational, technical, and adult programs. The manual was developed by a supervisor, a teacher-coordinator, teachers, and dentists at the local level and tested in the local school. The objectives are to prepare…

Resource Manual for Functional Vision Evaluation. Technical Assistance Bulletin.

ERIC Educational Resources Information Center

Texas Education Agency, Austin. Div. of Special Education.

The manual was intended to help school personnel (either an educator of the visually handicapped and/or a certified orientation and mobility instructor) evaluate the functional use of residual vision. The manual is organized in three major sections, which cover the following: (1) the general areas addressed in functional vision evaluation (such as…

Tools and Their Uses. Rate Training Manual.

ERIC Educational Resources Information Center

Naval Personnel Program Support Activity, Washington, DC.

One of a series of training manuals prepared for enlisted personnel in the Navy and Naval Reserve, this supplementary manual contains data pertinent to a variety of tools necessary to the satisfactory performance of modern technical equipment used by the Navy. It is designed to help the learner identify tools and fastening devices by their correct…

29 CFR 1952.107 - Changes to approved plans.

Code of Federal Regulations, 2010 CFR

2010-07-01

.... (b) The State submitted an industrial hygiene technical manual patterned after the Federal manual... under the plan to Superfund sites and private contractors working on U.S. Army Corps of Engineers dam...

--No Title--

Science.gov Websites

Search Search Home SH Reference Manual E19 Documentation Program Management Training/Drills Other River and Lake Summary (RVD) SH Reference Manual, E-19 Docs, Program Management, Training/Drills, Other

32 CFR 518.21 - Collection of fees and fee rates for technical data.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Fee rates-(1) Costs for a manual search of technical data. Type Grade Hourly rate ($) Clerical E9/GS 8... costs for technical data. Type Cost ($) Aerial photograph, maps, specifications, permits, charts... microfilm indices, each .10 (e) Review time costs of technical data. Type Grade Hourly rate($) Clerical E9...

32 CFR 518.21 - Collection of fees and fee rates for technical data.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) Fee rates-(1) Costs for a manual search of technical data. Type Grade Hourly rate ($) Clerical E9/GS 8... costs for technical data. Type Cost ($) Aerial photograph, maps, specifications, permits, charts... microfilm indices, each .10 (e) Review time costs of technical data. Type Grade Hourly rate($) Clerical E9...

32 CFR 518.21 - Collection of fees and fee rates for technical data.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Fee rates-(1) Costs for a manual search of technical data. Type Grade Hourly rate ($) Clerical E9/GS 8... costs for technical data. Type Cost ($) Aerial photograph, maps, specifications, permits, charts... microfilm indices, each .10 (e) Review time costs of technical data. Type Grade Hourly rate($) Clerical E9...

32 CFR 518.21 - Collection of fees and fee rates for technical data.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Fee rates-(1) Costs for a manual search of technical data. Type Grade Hourly rate ($) Clerical E9/GS 8... costs for technical data. Type Cost ($) Aerial photograph, maps, specifications, permits, charts... microfilm indices, each .10 (e) Review time costs of technical data. Type Grade Hourly rate($) Clerical E9...

Technical Factors Influencing Cone Packing Density Estimates in Adaptive Optics Flood Illuminated Retinal Images

PubMed Central

Lombardo, Marco; Serrao, Sebastiano; Lombardo, Giuseppe

2014-01-01

Purpose To investigate the influence of various technical factors on the variation of cone packing density estimates in adaptive optics flood illuminated retinal images. Methods Adaptive optics images of the photoreceptor mosaic were obtained in fifteen healthy subjects. The cone density and Voronoi diagrams were assessed in sampling windows of 320×320 µm, 160×160 µm and 64×64 µm at 1.5 degree temporal and superior eccentricity from the preferred locus of fixation (PRL). The technical factors that have been analyzed included the sampling window size, the corrected retinal magnification factor (RMFcorr), the conversion from radial to linear distance from the PRL, the displacement between the PRL and foveal center and the manual checking of cone identification algorithm. Bland-Altman analysis was used to assess the agreement between cone density estimated within the different sampling window conditions. Results The cone density declined with decreasing sampling area and data between areas of different size showed low agreement. A high agreement was found between sampling areas of the same size when comparing density calculated with or without using individual RMFcorr. The agreement between cone density measured at radial and linear distances from the PRL and between data referred to the PRL or the foveal center was moderate. The percentage of Voronoi tiles with hexagonal packing arrangement was comparable between sampling areas of different size. The boundary effect, presence of any retinal vessels, and the manual selection of cones missed by the automated identification algorithm were identified as the factors influencing variation of cone packing arrangements in Voronoi diagrams. Conclusions The sampling window size is the main technical factor that influences variation of cone density. Clear identification of each cone in the image and the use of a large buffer zone are necessary to minimize factors influencing variation of Voronoi diagrams of the cone mosaic. PMID:25203681

Technical factors influencing cone packing density estimates in adaptive optics flood illuminated retinal images.

PubMed

Lombardo, Marco; Serrao, Sebastiano; Lombardo, Giuseppe

2014-01-01

To investigate the influence of various technical factors on the variation of cone packing density estimates in adaptive optics flood illuminated retinal images. Adaptive optics images of the photoreceptor mosaic were obtained in fifteen healthy subjects. The cone density and Voronoi diagrams were assessed in sampling windows of 320×320 µm, 160×160 µm and 64×64 µm at 1.5 degree temporal and superior eccentricity from the preferred locus of fixation (PRL). The technical factors that have been analyzed included the sampling window size, the corrected retinal magnification factor (RMFcorr), the conversion from radial to linear distance from the PRL, the displacement between the PRL and foveal center and the manual checking of cone identification algorithm. Bland-Altman analysis was used to assess the agreement between cone density estimated within the different sampling window conditions. The cone density declined with decreasing sampling area and data between areas of different size showed low agreement. A high agreement was found between sampling areas of the same size when comparing density calculated with or without using individual RMFcorr. The agreement between cone density measured at radial and linear distances from the PRL and between data referred to the PRL or the foveal center was moderate. The percentage of Voronoi tiles with hexagonal packing arrangement was comparable between sampling areas of different size. The boundary effect, presence of any retinal vessels, and the manual selection of cones missed by the automated identification algorithm were identified as the factors influencing variation of cone packing arrangements in Voronoi diagrams. The sampling window size is the main technical factor that influences variation of cone density. Clear identification of each cone in the image and the use of a large buffer zone are necessary to minimize factors influencing variation of Voronoi diagrams of the cone mosaic.

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2014 CFR

2014-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2013 CFR

2013-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2012 CFR

2012-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2011 CFR

2011-10-01

... facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not... mechanical equipment (other than technical medical and other technical equipment and devices) issued by a...

Typing Postal Cards. Student's Manual and Instructor's Manual.

ERIC Educational Resources Information Center

Snapp, Jane

Supporting performance objective 85 of the V-TECS (Vocational-Technical Education Consortium of States) Secretarial Catalog, both a set of student materials and an instructor's manual on typing postal cards are included in this packet. (The packet is the seventh in a set of fifteen on typewriting--CE 016 920-934.) The student materials include a…

Filing Alphabetically. Basic Rules. Student's Manual and Instructor's Manual.

ERIC Educational Resources Information Center

McLeod, Sadie

Supporting performance objectives 21, 25, and 26 of the V-TECS (Vocational-Technical Education Consortium of States) Secretarial Catalog, both a set of student materials and an instructor's manual on the basic rules of filing alphabetically are included in this packet. (The packet is the first in a set of nine on maintaining files and a…

Higher Education Finance Manual. Technical Report No. 53. Field Review Edition.

ERIC Educational Resources Information Center

Collier, Douglas J.

The primary goal of the Higher Education Finance Manual project is to assist in higher education decisionmaking as it relates to the need for and the use of financial information. The objectives of this manual are to: (1) provide uniform definitions and procedures for displaying and reporting those financial data used most often in higher…

A Technical Assistance Manual on the Employment Provisions (Title 1) of the Americans With Disabilities Act.

ERIC Educational Resources Information Center

Equal Employment Opportunity Commission, Washington, DC.

This manual and resource directory aims to help employers, other entities, and persons with disabilities learn about their obligations and rights under the employment provisions of Title I of the Americans with Disabilities Act (ADA). The manual provides guidance on the application of legal requirements established in the statute and in…

Computing Gross Pay from Punched Time Cards. Student Manual and Instructor's Manual.

ERIC Educational Resources Information Center

McElveen, Peggy C.

Supporting performance objective 30 of the V-TECS (Vocational-Technical Education Consortium of States) Secretarial Catalog, both a set of student materials and an instructor's manual on computing gross pay from punched time cards are included in this packet, which is part of a series. The student materials include a group of time cards,…

Preparing Payroll Register, Employee Earnings' Records, and Paychecks. Student's Manual and Instructor's Manual.

ERIC Educational Resources Information Center

McElveen, Peggy C.

Supporting performance objective 28 of the V-TECS (Vocational-Technical Education Consortium of States) Secretarial Catalog, both a set of student materials and an instructor's manual on preparing a payroll register, employee earnings' records, and paychecks are included in this packet, which is one in a series. The student materials include a…

Coordinating and Performing Activities for Employer. Preparing Expense Reports. Student Manual and Teacher's Manual.

ERIC Educational Resources Information Center

Jones, Maleeta M.

Supporting performance objective 13 of the V-TECS (Vocational-Technical Education Consortium of States) Secretarial Catalog, both a set of student materials and an instructor's manual on preparing employer's business expense statements are included in this packet. (The packet is the fourth in a set of four on coordinating and performing activities…

Analysis of FY79 Army Aircraft Accidents.

DTIC Science & Technology

1980-04-01

maintenance and field manuals . *.7 "reel world" Army operations. It Includes detailed lemons Additional requirmnent indifId by the results of the le-a...and 2. Emphb and direction to upgrade training at unit trufe of akrraft control, and school levels. R% eview the current aulons nd manuals to 3. Unit...Evaluation and revision of Army regulations, e Evluate effectiveness of programs desgned to technical manuals , field manuals , and other written Insure

Bibliography of Technical Publications, Papers, and List of Patents, October 1985-September 1986

DTIC Science & Technology

1986-11-01

NOTICE For classified documents, follow the procedures in DoD 5200.1-R, Chapter IX or DoD 5220.22-M, " Industrial Security Manual," paragraph 19. For... Industries , Inc. Contract No. DAAK60-83-C-0040. NATICK/TR-85/064L, September 1985 (AD B107 724L). •_ CHEMCAS Volume II: User’s Manual. AMAF Industries ...the food industry . National Food Processors Association Meeting, Washington, DC, May 14, 1986. ... rib FOOD ENGINEERING DIRECTORATE Technical Papers

Structuring of manual of orientations and technical information for laundries of industries of animal products origin.

PubMed

da Silva, Vania Eugênia; Mafra, Simone Caldas Tavares; Mafra, Cláudio Lísias; de Souza, Amaury Paulo

2012-01-01

This study looked for to lift information regarding laundries inserted in industries of animal products origin, to understand the activities developed in the section and to structure a Manual of Planning and Technical Information for laundries to industries of animal products origin, with the intention of subsidizing the planning, structuring and control of this work place, because norms or regulations that supervise don't exist or aid their managers and workers as for the operation of this work place.

A Database Management System Application for the Graduate Programs Office of the School of Systems and Logistics. Volume 2. Technical Reference Manual

DTIC Science & Technology

1988-09-01

CIT C 15 Name of local city. InCSrATE C 2 Name of local state as tw letter abbreviatiom. SIC ZIP C 10 Loa ZIP code. Five or nine digits . InC_ PHKtE C 15...record: 10 Database Dictimary for C: \\ BASE\\PAS1E.MF Field Nane Type Width Decimal Coments PMSCODE C 2 Third and fourth digits of PAS code. ON C 3...Version: 3.01 Date: 09/01/88 Time: 21:34 Report Libary : C: ASE\\GPO.RP1 Date: 08/28/88 Time: 11:32 PRMNT OFTICNS CflRL-PRINrM Nmber of copies: 1 Starting

Patent Administration by Office Computer - A Case at Mazda Motor Corporation

NASA Astrophysics Data System (ADS)

Kimura, Ikuo; Nakamura, Shinji

The needs of patent administration have been diversified reflecting R&D activities under the severe competition of technical development, and business has been increased in quantity year after year as seen in patent application. Under these circumstances it is necessary to develop business mechanization which assists manual operation as much as possible to enforce the patent administration. Introducing office computer (CPU 512 KB, external memory 128 MB) for exclusive use in this purpose, Patent Department of Mazda Motor Corporation has been constructing database of patent administration centered around patent application by their own company, and utilizes it for automatic preparation of business forms, preparation of various statistical materials, and real-time reference to the application procedures.

The Conference Proceedings of the 1999 Air Transport Research Group (ATRG) of the WCTR Society. Volume 1

NASA Technical Reports Server (NTRS)

Zhang, Anming (Editor); Bowen, Brent D. (Editor)

1999-01-01

The UNO (University of Nebraska at Omaha) Aviation Institute Monograph Series began in 1994 as a key component of the education outreach and information transfer missions of the Aviation Institute and the NASA Nebraska Space Grant & EPSCoR (Experimental Program to Stimulate Competitive Research) Programs. The series is an outlet for aviation materials to be indexed and disseminated through an efficient medium. Publications are welcome in all aspects of aviation. Publication formats may include, but are not limited to, conference proceedings, bibliographies, research reports, manuals, technical reports, and other documents that should be archived and indexed for future reference by the aviation and world wide communities.

Army Science Board (ASB) Report of the AD HOC Subgroup on Water Supply and Management on Army Installations in the Western United States

DTIC Science & Technology

1988-02-01

Operations and Maintenance ( O &M), Proving Grounds (PG), Research and Development (R&D), Surface Water (SW), Technical Manual (TM), Terms of Reference...presentation (Chair and HODA Staff Assistant o !y% 3 i. EXECUTIVE SUMMARY Water is a strategic resource for the Army. It is essential for industrial...GRANDE REGION lla qLL c5(5 eO e0€••oo ac’ 00 :42 t4 c4 ř m "- n "ciis M C4 00.4 -4. 00 0 . 𔃺 o ro o j • •" o 00’- total water withdrawn for

SAM Photovoltaic Model Technical Reference 2016 Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilman, Paul; DiOrio, Nicholas A; Freeman, Janine M

This manual describes the photovoltaic performance model in the System Advisor Model (SAM) software, Version 2016.3.14 Revision 4 (SSC Version 160). It is an update to the 2015 edition of the manual, which describes the photovoltaic model in SAM 2015.1.30 (SSC 41). This new edition includes corrections of errors in the 2015 edition and descriptions of new features introduced in SAM 2016.3.14, including: 3D shade calculator Battery storage model DC power optimizer loss inputs Snow loss model Plane-of-array irradiance input from weather file option Support for sub-hourly simulations Self-shading works with all four subarrays, and uses same algorithm for fixedmore » arrays and one-axis tracking Linear self-shading algorithm for thin-film modules Loss percentages replace derate factors. The photovoltaic performance model is one of the modules in the SAM Simulation Core (SSC), which is part of both SAM and the SAM SDK. SAM is a user-friedly desktop application for analysis of renewable energy projects. The SAM SDK (Software Development Kit) is for developers writing their own renewable energy analysis software based on SSC. This manual is written for users of both SAM and the SAM SDK wanting to learn more about the details of SAM's photovoltaic model.« less

Marine safety manual, volume 4 : technical

DOT National Transportation Integrated Search

2005-01-01

A comprehensive manual which provides guidance on the application of Coast Guard regulations and explains the rationale behind their development is vital to the successful execution of the marine safety program. This volume is intended to serve that ...

Illinois Community College Board. Adult Education and Family Literacy. Provider Manual. Fiscal Year 2007

ERIC Educational Resources Information Center

Illinois Community College Board, 2007

2007-01-01

The Illinois Community College Board has developed this Provider Manual as an easy reference to: (1) existing laws and regulations, both State and Federal; (2) best practices in the field of Adult Education; and to (3) act as a desk reference for both new and existing program administrators. The Manual describes: (1) the purpose of the Federal…

ANSI/ASHRAE/IES Standard 90.1-2010 Performance Rating Method Reference Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goel, Supriya; Rosenberg, Michael I.

This document is intended to be a reference manual for the Appendix G Performance Rating Method (PRM) of ANSI/ASHRAE/IES Standard 90.1- 2010 (Standard 90.1-2010).The PRM is used for rating the energy efficiency of commercial and high-rise residential buildings with designs that exceed the requirements of Standard 90.1. The procedures and processes described in this manual are designed to provide consistency and accuracy by filling in gaps and providing additional details needed by users of the PRM. It should be noted that this document is created independently from ASHRAE and SSPC 90.1 and is not sanctioned nor approved by either ofmore » those entities . Potential users of this manual include energy modelers, software developers and implementers of “beyond code” energy programs. Energy modelers using ASHRAE Standard 90.1-2010 for beyond code programs can use this document as a reference manual for interpreting requirements of the Performance Rating method. Software developers, developing tools for automated creation of the baseline model can use this reference manual as a guideline for developing the rules for the baseline model.« less

E&V (Evaluation and Validation) Reference Manual, Version 1.0.

DTIC Science & Technology

1988-07-01

references featured in the Reference Manual. G-05097a GENERAL REFERENCE INFORMATION EXTRACTED , FROM * INDEXES AND CROSS REFERENCES CHAPTER 4...at E&V techniques through many different paths, and provides a means to extract useful information along the way. /^c^^s; /r^ ^yr*•**•»» * L...electronically (preferred) to szymansk@ajpo.sei.cmu.edu or by regular mail to Mr. Raymond Szymanski . AFWAUAAAF, Wright Patterson AFB, OH 45433-6543. ES-2

Employees Who Use Wheelchairs

MedlinePlus

... 1630 (2011). Equal Employment Opportunity Commission. (1992). A technical assistance manual on the employment provisions (title I) ... ASK A JAN CONSULTANT JAN provides free, confidential technical assistance about job accommodations and the Americans with ...

Storyboarding: A Concrete Way to Generate Effective Visuals.

ERIC Educational Resources Information Center

Larkin, Greg

1996-01-01

Advances the idea that storyboarding, long associated with scriptwriting, advertising, and more recently with technical manuals, can be successfully applied to an even broader variety of technical documents. Applies storyboarding techniques to designing technical proposals to suggest methods of incorporating more visuals into documents, as well as…

Construction of a manual of work processes and techniques from Centro de Dispensação de Medicamentos de Alto Custo (CEDMAC), Hospital de Clínicas, Unicamp.

PubMed

Bertolo, Manoel Barros; Ferreira, Bruno Silva de Araújo; Marchiore, Adriana G Mucke; Carvalho, Glaucia Pereira do Amaral; de Souza, Débora Pessoa; Psaltikidis, Eliane Molina

2014-01-01

The Centers for High Cost Medication (Centros de Medicação de Alto Custo, CEDMAC), Health Department, São Paulo were instituted by project in partnership with the Clinical Hospital of the Faculty of Medicine, USP, sponsored by the Foundation for Research Support of the State of São Paulo (Fundação de Amparo à Pesquisa do Estado de São Paulo, FAPESP) aimed at the formation of a statewide network for comprehensive care of patients referred for use of immunobiological agents in rheumatological diseases. The CEDMAC of Hospital de Clínicas, Universidade Estadual de Campinas (HC-Unicamp), implemented by the Division of Rheumatology, Faculty of Medical Sciences, identified the need for standardization of the multidisciplinary team conducts, in face of the specificity of care conducts, verifying the importance of describing, in manual format, their operational and technical processes. The aim of this study is to present the methodology applied to the elaboration of the CEDMAC/HC-Unicamp Manual as an institutional tool, with the aim of offering the best assistance and administrative quality. In the methodology for preparing the manuals at HC-Unicamp since 2008, the premise was to obtain a document that is participatory, multidisciplinary, focused on work processes integrated with institutional rules, with objective and didactic descriptions, in a standardized format and with electronic dissemination. The CEDMAC/HC-Unicamp Manual was elaborated in 10 months, with involvement of the entire multidisciplinary team, with 19 chapters on work processes and techniques, in addition to those concerning the organizational structure and its annexes. Published in the electronic portal of HC Manuals in July 2012 as an e-Book (ISBN 978-85-63274-17-5), the manual has been a valuable instrument in guiding professionals in healthcare, teaching and research activities.

Sources and Nature of Cost Analysis Data Base Reference Manual.

DTIC Science & Technology

1983-07-01

COVERED Sources and Nature of Cost Analysis Data Base Interim Report (Update) Reference Manual 6 . PERFORMING ORG. REPORT NUMBER USAAVRADCOM TM 83-F-3 7 ...SECTION 6 - DATA FOR MULTIPLE APPLICATIONS 6.0.0 7.0.0 SECTION 7 - GLOSSARY OF COST ANALYSIS TERMS SECTION 8 - REFERENCES 8.0.0 SECTION 9 - BIBLIOGRAPHY...Relationsh-;ips Manual for the Army 1.14. 1 Yateri ci Command, TP-449, Mla; 1912 ( 7 21 RACKFORS JiR 1CO(PTER, INC. xlB.Aii- 6 -4A 1.15. 1 Z FNE>:THj MUNSON

Measurement standards for interdisciplinary medical rehabilitation.

PubMed

Johnston, M V; Keith, R A; Hinderer, S R

1992-12-01

Rehabilitation must address problems inherent in the measurement of human function and health-related quality of life, as well as problems in diagnosis and measurement of impairment. This educational document presents an initial set of standards to be used as guidelines for development and use of measurement and evaluation procedures and instruments for interdisciplinary, health-related rehabilitation. Part I covers general measurement principles and technical standards, beginning with validity, the central consideration for use of measures. Subsequent sections focus on reliability and errors of measurement, norms and scaling, development of measures, and technical manuals and guides. Part II covers principles and standards for use of measures. General principles of application of measures in practice are discussed first, followed by standards to protect persons being measured and then by standards for administrative applications. Many explanations, examples, and references are provided to help professionals understand measurement principles. Improved measurement will ensure the basis of rehabilitation as a science and nourish its success as a clinical service.

Designing Flightdeck Procedures: Literature Resources

NASA Technical Reports Server (NTRS)

Feldman, Jolene; Barshi, Immanuel; Degani, Asaf; Loukopoulou, Loukia; Mauro, Robert

2017-01-01

This technical publication contains the titles, abstracts, summaries, descriptions, and/or annotations of available literature sources on procedure design and development, requirements, and guidance. It is designed to provide users with an easy access to available resources on the topic of procedure design, and with a sense of the contents of these sources. This repository of information is organized into the following publication sources: Research (e.g., journal articles, conference proceedings), Manufacturers' (e.g., operation manuals, newsletters), and Regulatory and/or Government (e.g., advisory circulars, reports). An additional section contains synopses of Accident/Incident Reports involving procedures. This work directly supports a comprehensive memorandum by Barshi, Mauro, Degani, & Loukopoulou (2016) that summarizes the results of a multi-year project, partially funded by the FAA, to develop technical reference materials that support guidance on the process of developing cockpit procedures (see "Designing Flightdeck Procedures" https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20160013263.pdf). An extensive treatment of this topic is presented in a forthcoming book by the same authors.

15 CFR 1180.4 - Preparing a product for transfer.

Code of Federal Regulations, 2014 CFR

2014-01-01

... SCIENTIFIC, TECHNICAL AND ENGINEERING INFORMATION TO THE NATIONAL TECHNICAL INFORMATION SERVICE § 1180.4... medium; (3) In the case of software, be accompanied by relevant documentation, such as operating manuals...

Utilization of robotic-arm assisted total knee arthroplasty for soft tissue protection.

PubMed

Sultan, Assem A; Piuzzi, Nicolas; Khlopas, Anton; Chughtai, Morad; Sodhi, Nipun; Mont, Michael A

2017-12-01

Despite the well-established success of total knee arthroplasty (TKA), iatrogenic ligamentous and soft tissue injuries are infrequent, but potential complications that can have devastating impact on clinical outcomes. These injuries are often related to technical errors and excessive soft tissue manipulation, particularly during bony resections. Recently, robotic-arm assisted TKA was introduced and demonstrated promising results with potential technical advantages over manual surgery in implant positioning and mechanical accuracy. Furthermore, soft tissue protection is an additional potential advantage offered by these systems that can reduce inadvertent human technical errors encountered during standard manual resections. Therefore, due to the relative paucity of literature, we attempted to answer the following questions: 1) does robotic-arm assisted TKA offer a technical advantage that allows enhanced soft tissue protection? 2) What is the available evidence about soft tissue protection? Recently introduced models of robotic-arm assisted TKA systems with advanced technology showed promising clinical outcomes and soft tissue protection in the short- and mid-term follow-up with results comparable or superior to manual TKA. In this review, we attempted to explore this dimension of robotics in TKA and investigate the soft tissue related complications currently reported in the literature.

Technical publication transfer test with McDonnell Aircraft Company: MIL-M-28001 (SGML) and MIL-D-28000 Class 1 (IGES)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-06-25

The CALS Test Network (CTN) conducted a CTN Planned Test (CPT) of several CALS standards related to the transfer of technical publication data: MIL-STD-1840A (1840A), MIL-D-28000 Class I (28000), MIL-M-28001 (28001), and MIL-D-28003 (28003). The test was conducted with the McDonnell Aircraft Company (CMAIR) of St. Louis, Missouri in accordance with part one of CTN Test Plan CTN89-TM-06 and using material from an F-15E technical manual. One focus of the test was the transfer of a moderately large volume of technical publication data. There were 9 text files, 74 Initial Graphics Exchange Specification (IGES) files, and 74 Computer Graphics Metafilemore » (CGM) files in the exchange package. A noteworthy feature of the test was its early attempt to exchange CGM data. Part one of CTN89-TM-06 called for technical publication data to be output from MCAIR's Xyvision system on 9-track magnetic tape. The data was to be in accordance with the 28001 subset of the Standard Generalized Mark-up Language (SGML) and the 28001 Document Type Definition (DTD) that conformed to MIL-M-38784B, the general style and format requirements for technical manuals. Technical illustrations in the manual were to be done in accordance with 28000 Class I (IGES) and 28003 (CGM). Part two of the test called for the test tape to be read into another technical publication system where the text would be modified and the vector illustrations would all be converted to raster, in accordance with MIL-R-28002. This part of the test is not covered in this report.« less

High School and Beyond Transcripts Survey (1982). Data File User's Manual. Contractor Report.

ERIC Educational Resources Information Center

Jones, Calvin; And Others

This data file user's manual documents the procedures used to collect and process high school transcripts for a large sample of the younger cohort (1980 sophomores) in the High School and Beyond survey. The manual provides the user with the technical assistance needed to use the computer file and also discusses the following: (1) sample design for…

Small Enterprise Development In-Service Training Manual. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-43.

ERIC Educational Resources Information Center

Pragma Corp., Falls Church, VA.

This manual is intended to assist Peace Corps trainers in providing inservice technical training in small enterprise development. The following topics are covered: expectations and sharing of resources, problem analysis as a part of project identification, procedures in setting goals and objectives, steps in identifying project resources, the…

Sanitary Survey Training. The Need-to-Know Material. Instructor's Technical Manual.

ERIC Educational Resources Information Center

Gardner, Anne, Ed.

This manual, developed as an aid to state agencies who provide instruction to inspectors of water systems, is based on the minimum information that an inspector with limited experience needs to know to successfully assess a public water system. The manual is designed for use by individuals who are experts in the field of water systems and sanitary…

Cost Analysis Sources and Documents Data Base Reference Manual (Update)

DTIC Science & Technology

1989-06-01

M: Refcrence Manual PRICE H: Training Course Workbook 11. Use in Cost Analysis. Important source of cost estimates for electronic and mechanical...Nature of Data. Contains many microeconomic time series by month or quarter. 5. Level of Detail. Very detailed. 6. Normalization Processes Required...Reference Manual. Moorestown, N.J,: GE Corporation, September 1986. 64. PRICE Training Course Workbook . Moorestown, N.J.: GE Corporation, February 1986

Robotic-Assisted Versus Manual Prostatic Arterial Embolization for Benign Prostatic Hyperplasia: A Comparative Analysis.

PubMed

Bagla, Sandeep; Smirniotopoulos, John; Orlando, Julie C; Piechowiak, Rachel

2017-03-01

Prostatic artery embolization (PAE) is a safe and efficacious procedure for benign prostatic hyperplasia (BPH), though is technically challenging. We present our experience of technical and clinical outcomes of robotic and manual PAE in patients with BPH. IRB-approved retrospective study of 40 consecutive patients 49-81 years old with moderate or severe grade BPH from May 2014 to July 2015: 20 robotic-assisted PAE (group 1), 20 manual PAE (group 2). Robotic-assisted PAE was performed using the Magellan Robotic System. American Urological Association (AUA-SI) score, cost, technical and clinical success, radiation dose, fluoroscopy, and procedure time were reviewed. Statistical analysis was performed within and between each group using paired t test and one-way analysis of variance respectively, at 1 and 3 months. No significant baseline differences in age and AUA-SI between groups. Technical success was 100% (group 1) and 95% (group 2). One unsuccessful subject from group 2 returned for a successful embolization using robotic assistance. Fluoroscopy and procedural times were similar between groups, with a non-significant lower patient radiation dose in group 1 (30,632.8 mGy/cm 2 vs 35,890.9, p = 0.269). Disposable cost was significantly different between groups with the robotic-assisted PAE incurring a higher cost (group 1 $4530.2; group 2 $1588.5, p < 0.0001). Clinical improvement was significant in both arms at 3 months: group 1 mean change in AUA-SI of 8.3 (p = 0.006), group 2: 9.6 (p < 0.0001). No minor or major complications occurred. Robotic-assisted PAE offers technical success comparable to manual PAE, with similar clinical improvement with an increased cost.

15 CFR 1180.4 - Preparing a product for transfer.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., TECHNICAL AND ENGINEERING INFORMATION TO THE NATIONAL TECHNICAL INFORMATION SERVICE § 1180.4 Preparing a...) In the case of software, be accompanied by relevant documentation, such as operating manuals, but not...

15 CFR 1180.4 - Preparing a product for transfer.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., TECHNICAL AND ENGINEERING INFORMATION TO THE NATIONAL TECHNICAL INFORMATION SERVICE § 1180.4 Preparing a...) In the case of software, be accompanied by relevant documentation, such as operating manuals, but not...

15 CFR 1180.4 - Preparing a product for transfer.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., TECHNICAL AND ENGINEERING INFORMATION TO THE NATIONAL TECHNICAL INFORMATION SERVICE § 1180.4 Preparing a...) In the case of software, be accompanied by relevant documentation, such as operating manuals, but not...

15 CFR 1180.4 - Preparing a product for transfer.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., TECHNICAL AND ENGINEERING INFORMATION TO THE NATIONAL TECHNICAL INFORMATION SERVICE § 1180.4 Preparing a...) In the case of software, be accompanied by relevant documentation, such as operating manuals, but not...

PRODUCTION OF HEAVY WATER SAVANNAH RIVER AND DANA PLANTS. Technical Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bebbington, W.P.; Thayer, V.R. eds.; Proctor, J.F. comp.

1959-07-01

A summary is presented of the basic technical iniormation that pertains to processes that are used at the Dana and Savannah River Plants for the production of heavy water. The manual is intended primarily for plant operating and technical personnel and was prepared to supplement and provide technical support for detailed operating procedures. Introductory sections contain some background information on the history, uses, available processes, and analytical procedures for heavy water. They also include a general comparison of the design and laserformance of the two plants and an analysis of their differences. The technology of the heavy water separation processesmore » used, namely hydrogen sulfide exchange, distillation of water, and electrolysis is discussed in detail. The manufacture and storage of hydrogen sulfide gas and the process water treatment facilities are also discussed. (auth)« less

The influence of supervision on manual adherence and therapeutic processes.

PubMed

Anderson, Timothy; Crowley, Mary Ellen J; Patterson, Candace L; Heckman, Bernadette D

2012-09-01

To identify the effectiveness of psychotherapy supervision on therapists' immediate (next session) and long-term (1 year) adherence to time-limited dynamic psychotherapy (TLDP). Sixteen therapists from the Vanderbilt II psychotherapy project were assigned new cases in pretraining, training, and booster/posttraining year-long cohorts. Technical adherence to the manual, as well as general therapeutic relational processes, were rated for clinical supervisory sessions in which the third therapy session was discussed. The therapy sessions immediately before and after the supervisory sessions were also rated for technical adherence and relational processes. Postsupervision adherence increased from the presupervision session during the training cohort. In supervision, therapists' discussion of techniques and strategies from the manual in supervision was significantly related to technical adherence in the session prior to (but not after) supervision. However, supervisors' discussion of specific techniques predicted therapists' total technical adherence in the therapy session after (but not before) supervision. In terms of the type of techniques, supervisors' influenced postsupervision therapy adherence on TLDP's unique approach to formulation, the cyclical maladaptive pattern, but did not influence technical adherence on the therapeutic relationship. In supervision, therapists tend to focus on how they adhered to techniques from the previous session, whereas supervisors' comments about specific techniques predicted how the therapist would adhere to techniques in the next therapy session. The findings provide support for the immediate effects of supervision in shaping therapist techniques as well as highlighting the challenges of altering common relational processes through technical training. © 2012 Wiley Periodicals, Inc.

An Overview of Clarkson's Technical Communications Program.

ERIC Educational Resources Information Center

Barkman, Patricia R.

The technical communications program at Clarkson College (New York) offers students 23 courses in subjects ranging from interpersonal behavior to engineering and scientific report writing to computer documentation and the development of technical manuals. With the help of an advisor, each student works out a course of study appropriate to his or…

Software System User’s Manual, Reference Manual, and Installation Guide for the Test Engineer’s Assistant System.

DTIC Science & Technology

1989-02-28

AD-A259 245 RESEARCH TRIANGLE INSTITUTE I SOFTWARE SYSTEM USER’S MANUAL, REFERENCE MANUAL, AND INSTALLATION GUIDE FOR THE TEST ENGINEER’S ASSISTANT...SYSTEM U. yD"VxC - February 28, 1989 Iŕ 5 G3 ’Contract No. DAAL01-86-C-0039 W Prepared for: Department of the Army Electronics Research and...Development Command Fort Monmouth, New Jersey 07703 I Prepared by: Center for Digital Systems ResearchI Research Triangle Institute Research Triangle Park, NC

Job Language Performance Requirements for MOS 75C. Personnel Management Specialist. Reference Soldier’s Manual Dated 22 May 1979.

DTIC Science & Technology

1979-05-22

STANDARDS-1963-A •4 OCT 1982 kJOB LANGUAGE PERFORMANCE REQUIREMENTS FOR 75C PERSONNEL MANAGEENT SPECIALIST REFERENCE SOLDIER’S MANUAL DATED 22 May 1979...task by task listing of the vocabulary extracted from the Soldier’s Manual .. iii [’ Appendix seven contains the machine-generated vocabulary f3r this...Observation Form and an analysis of language structures in the Soldier’s Manual for this MOS. The Observation Form (Appendix 4) was used to record actual

Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC), version 4.0: User's manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1988-01-01

The information in the NASARC (Version 4.0) Technical Manual (NASA-TM-101453) and NASARC (Version 4.0) User's Manual (NASA-TM-101454) relates to the state of Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) software development through November 1, 1988. The Technical Manual describes the NASARC concept and the algorithms used to implement the concept. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operation instructions. Significant revisions were incorporated in the Version 4.0 software over prior versions. These revisions have further enhanced the modeling capabilities of the NASARC procedure and provide improved arrangements of predetermined arcs within the geostationary orbit. Array dimensions within the software were structured to fit within the currently available 12-megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 4.) allows worldwide planning problem scenarios to be accommodated within computer run time and memory constraints with enhanced likelihood and ease of solution.

Numerical Arc Segmentation Algorithm for a Radio Conference-NASARC, Version 2.0: User's Manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1987-01-01

The information contained in the NASARC (Version 2.0) Technical Manual (NASA TM-100160) and the NASARC (Version 2.0) User's Manual (NASA TM-100161) relates to the state of the Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) software development through October 16, 1987. The technical manual describes the NASARC concept and the algorithms which are used to implement it. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operation instructions. Significant revisions have been incorporated in the Version 2.0 software over prior versions. These revisions have enhanced the modeling capabilities of the NASARC procedure while greatly reducing the computer run time and memory requirements. Array dimensions within the software have been structured to fit into the currently available 6-megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 2.0) allows worldwide scenarios to be accommodated within these memory constraints while at the same time reducing computer run time.

Local Technical Assistance Program Field Manual

DOT National Transportation Integrated Search

1997-02-01

The FHWA Local Technical Assistance Program (LTAP) provides technology transfer products to local highway departments. One of the most valuable and well-received resources of the program, the LTAP (or T 2 ) centers, have proven themselves invaluable ...

Microbial ecology laboratory procedures manual NASA/MSFC

NASA Technical Reports Server (NTRS)

Huff, Timothy L.

1990-01-01

An essential part of the efficient operation of any microbiology laboratory involved in sample analysis is a standard procedures manual. The purpose of this manual is to provide concise and well defined instructions on routine technical procedures involving sample analysis and methods for monitoring and maintaining quality control within the laboratory. Of equal importance is the safe operation of the laboratory. This manual outlines detailed procedures to be followed in the microbial ecology laboratory to assure safety, analytical control, and validity of results.

Clinical Decision Support-based Quality Measurement (CDS-QM) Framework: Prototype Implementation, Evaluation, and Future Directions

PubMed Central

Kukhareva, Polina V; Kawamoto, Kensaku; Shields, David E; Barfuss, Darryl T; Halley, Anne M; Tippetts, Tyler J; Warner, Phillip B; Bray, Bruce E; Staes, Catherine J

2014-01-01

Electronic quality measurement (QM) and clinical decision support (CDS) are closely related but are typically implemented independently, resulting in significant duplication of effort. While it seems intuitive that technical approaches could be re-used across these two related use cases, such reuse is seldom reported in the literature, especially for standards-based approaches. Therefore, we evaluated the feasibility of using a standards-based CDS framework aligned with anticipated EHR certification criteria to implement electronic QM. The CDS-QM framework was used to automate a complex national quality measure (SCIP-VTE-2) at an academic healthcare system which had previously relied on time-consuming manual chart abstractions. Compared with 305 manually-reviewed reference cases, the recall of automated measurement was 100%. The precision was 96.3% (CI:92.6%-98.5%) for ascertaining the denominator and 96.2% (CI:92.3%-98.4%) for the numerator. We therefore validated that a standards-based CDS-QM framework can successfully enable automated QM, and we identified benefits and challenges with this approach. PMID:25954389

Radio tuning effects on visual and driving performance measures : simulator and test track studies.

DOT National Transportation Integrated Search

2013-05-01

Existing driver distraction guidelines for visual-manual device interface operation specify traditional : manual radio tuning as a reference task. This project evaluated the radio tuning reference task through two activities. : The first activity con...

Flight dynamics analysis and simulation of heavy lift airships. Volume 5: Programmer's manual

NASA Technical Reports Server (NTRS)

Ringland, R. F.; Tischler, M. B.; Jex, H. R.; Emmen, R. D.; Ashkenas, I. L.

1982-01-01

The Programmer's Manual contains explanations of the logic embodied in the various program modules, a dictionary of program variables, a subroutine listing, subroutine/common block/cross reference listing, and a calling/called subroutine cross reference listing.

Oral Rehydration Therapy and the Control of Diarrheal Diseases. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-34.

ERIC Educational Resources Information Center

Clark, Mari; And Others

This manual was developed to train Peace Corps volunteers and other community health workers in oral rehydration therapy (ORT) and the control of diarrheal diseases. Using a competency-based format, the manual contains six training modules (organized in 22 sessions) that focus on interrelated health education and technical content areas. Each…

Bricklayer and Stonemason. U.S.O.E. 46.0102 D.O.T. 861.381, 861.781, 861.884. Student's Manual [and] Instructor's Guide.

ERIC Educational Resources Information Center

Grimes, L. A., Jr.

The student's manual in this two-part instructional kit is designed to help students in individualized courses in bricklaying and stone masonry to tie together classroom learning and on-the-job practice. The manual includes assignments, technical information, objectives that tell what the student is to learn from each assignment, and exercise…

Industrial Maintenance Technology (IM-TEC). Student Manual.

ERIC Educational Resources Information Center

Fusch, Gene E.

This student manual explains an innovative strategy through which Bellingham Technical College's (Washington) evening Industrial Electrician and Millwright Apprenticeships were aggregated with workforce upgrade course offerings to form the college's first evening degree program in Industrial Maintenance Technology (IM-TEC). Section 1 contains a…

Polymer Exemption Guidance Manual for premanufacture notices for new chemicals under the Toxic Substances Control Act (TSCA)

EPA Pesticide Factsheets

A technical manual to accompany, but not supersede the Premanufacture Notification Exemptions; Revisions of Exemptions for Polymers; Final Rule found at 40 CFR Part 723, (60) FR 16316-16336, published Wednesday, March 29, 1995.

CHERNOLITTM. Chernobyl Bibliographic Search System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Caff, F., Jr.; Kennedy, R.A.; Mahaffey, J.A.

1992-03-02

The Chernobyl Bibliographic Search System (Chernolit TM) provides bibliographic data in a usable format for research studies relating to the Chernobyl nuclear accident that occurred in the former Ukrainian Republic of the USSR in 1986. Chernolit TM is a portable and easy to use product. The bibliographic data is provided under the control of a graphical user interface so that the user may quickly and easily retrieve pertinent information from the large database. The user may search the database for occurrences of words, names, or phrases; view bibliographic references on screen; and obtain reports of selected references. Reports may bemore » viewed on the screen, printed, or accumulated in a folder that is written to a disk file when the user exits the software. Chernolit TM provides a cost-effective alternative to multiple, independent literature searches. Forty-five hundred references concerning the accident, including abstracts, are distributed with Chernolit TM. The data contained in the database were obtained from electronic literature searches and from requested donations from individuals and organizations. These literature searches interrogated the Energy Science and Technology database (formerly DOE ENERGY) of the DIALOG Information Retrieval Service. Energy Science and Technology, provided by the U.S. DOE, Washington, D.C., is a multi-disciplinary database containing references to the world`s scientific and technical literature on energy. All unclassified information processed at the Office of Scientific and Technical Information (OSTI) of the U.S. DOE is included in the database. In addition, information on many documents has been manually added to Chernolit TM. Most of this information was obtained in response to requests for data sent to people and/or organizations throughout the world.« less

Chernobyl Bibliographic Search System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carr, Jr, F.; Kennedy, R. A.; Mahaffey, J. A.

1992-05-11

The Chernobyl Bibliographic Search System (Chernolit TM) provides bibliographic data in a usable format for research studies relating to the Chernobyl nuclear accident that occurred in the former Ukrainian Republic of the USSR in 1986. Chernolit TM is a portable and easy to use product. The bibliographic data is provided under the control of a graphical user interface so that the user may quickly and easily retrieve pertinent information from the large database. The user may search the database for occurrences of words, names, or phrases; view bibliographic references on screen; and obtain reports of selected references. Reports may bemore » viewed on the screen, printed, or accumulated in a folder that is written to a disk file when the user exits the software. Chernolit TM provides a cost-effective alternative to multiple, independent literature searches. Forty-five hundred references concerning the accident, including abstracts, are distributed with Chernolit TM. The data contained in the database were obtained from electronic literature searches and from requested donations from individuals and organizations. These literature searches interrogated the Energy Science and Technology database (formerly DOE ENERGY) of the DIALOG Information Retrieval Service. Energy Science and Technology, provided by the U.S. DOE, Washington, D.C., is a multi-disciplinary database containing references to the world''s scientific and technical literature on energy. All unclassified information processed at the Office of Scientific and Technical Information (OSTI) of the U.S. DOE is included in the database. In addition, information on many documents has been manually added to Chernolit TM. Most of this information was obtained in response to requests for data sent to people and/or organizations throughout the world.« less

ILGWU Worker-Family Education Program. ESL/Technical Curriculum Manual.

ERIC Educational Resources Information Center

Friedman, Judy; Friedman, Deidre

The curriculum for the International Ladies' Garment Workers' Union (ILGWU) English as a Second Language (ESL) and technical classes is a collection of instructional materials and suggestions focusing on workplace-related topics and issues. This guide is intended for use in classes where one technical and one ESL teacher are present and where…

What Consultation and Freelance Writing Can Do for You and for Your Students.

ERIC Educational Resources Information Center

Muller, John A.

This paper advises teachers of technical writing to "practice what they preach" by occasionally doing field work in technical communication. The possibilities for off-campus work include consultation, perhaps for an in-house manual of technical writing procedures and skills, editing assignments for businesses and public agencies, and freelance…

Costs and consequences of automated algorithms versus manual grading for the detection of referable diabetic retinopathy.

PubMed

Scotland, G S; McNamee, P; Fleming, A D; Goatman, K A; Philip, S; Prescott, G J; Sharp, P F; Williams, G J; Wykes, W; Leese, G P; Olson, J A

2010-06-01

To assess the cost-effectiveness of an improved automated grading algorithm for diabetic retinopathy against a previously described algorithm, and in comparison with manual grading. Efficacy of the alternative algorithms was assessed using a reference graded set of images from three screening centres in Scotland (1253 cases with observable/referable retinopathy and 6333 individuals with mild or no retinopathy). Screening outcomes and grading and diagnosis costs were modelled for a cohort of 180 000 people, with prevalence of referable retinopathy at 4%. Algorithm (b), which combines image quality assessment with detection algorithms for microaneurysms (MA), blot haemorrhages and exudates, was compared with a simpler algorithm (a) (using image quality assessment and MA/dot haemorrhage (DH) detection), and the current practice of manual grading. Compared with algorithm (a), algorithm (b) would identify an additional 113 cases of referable retinopathy for an incremental cost of pound 68 per additional case. Compared with manual grading, automated grading would be expected to identify between 54 and 123 fewer referable cases, for a grading cost saving between pound 3834 and pound 1727 per case missed. Extrapolation modelling over a 20-year time horizon suggests manual grading would cost between pound 25,676 and pound 267,115 per additional quality adjusted life year gained. Algorithm (b) is more cost-effective than the algorithm based on quality assessment and MA/DH detection. With respect to the value of introducing automated detection systems into screening programmes, automated grading operates within the recommended national standards in Scotland and is likely to be considered a cost-effective alternative to manual disease/no disease grading.

Radiological Defense Manual.

ERIC Educational Resources Information Center

Defense Civil Preparedness Agency (DOD), Washington, DC.

Originally prepared for use as a student textbook in Radiological Defense (RADEF) courses, this manual provides the basic technical information necessary for an understanding of RADEF. It also briefly discusses the need for RADEF planning and expected postattack emergency operations. There are 14 chapters covering these major topics: introduction…

Techniques for predicting high-risk drivers for alcohol countermeasures. Volume 2, User manual

DOT National Transportation Integrated Search

1978-06-01

This user manual, a companion to the Volume I Technical Report by the same name, is designed to aid the alcohol program administrator in his decisions concerning implementation of countermeasures to selected individuals or small groups of drivers. Vo...

Job Language Performance Requirements for MOS 52D, Power Generation Equipment Repairer, Reference Soldier’s Manual Dated 10 April 1979.

DTIC Science & Technology

1979-04-10

REFERENCE SOLDIER’S MANUAL DATED 10 April 1979 &N avaiabl, to DTIC dom not ,sMfuf legible epoducdm DTIC ELECTIE " " [ " "mm’ L m 82 11 01 .~ ~~~&~ I...from the Soldier’s Manual . .. iii ( Appendix seven contains the machine-generated vocabulary for :*.’s S $ prepared by the United States Army Training...structures in the Soldier’s Manual for this MOS. The Observation Form (Appendix 4) was used to record actual observations of the learning situations

Technical Health Training Manual. Volume 1. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-35a.

ERIC Educational Resources Information Center

Clark, Mari; And Others

This manual is designed as a resource for trainers who provide preservice training, either in-country or state-side, to health specialists and generalists assigned to health projects at the community and clinical levels. The training is intended to assist the volunteer in developing knowledge and skill in the areas of primary health care and the…

Technical Health Training Manual. Volume 2. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-35a.

ERIC Educational Resources Information Center

Clark, Mari; And Others

This manual is designed as a resource for trainers who provide preservice training, either in-country or state-side, to health specialists and generalists assigned to health projects at the community and clinical levels. The training is intended to assist the volunteer in developing knowledge and skill in the areas of primary health care and the…

Comparison of manual scaled and predicted foE and foF1 critical frequencies. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gamache, R.R.; Kersey, W.T.

1990-07-01

The CCIR and Titheridge foE critical frequency prediction routines were tested by comparison with 1875 manually scaled values. The foF1 critical frequency prediction routine of Millman et al was tested by comparison with 1005 manually scaled values. Plots and statistics of the comparisons are presented and discussed. From the results recommendations are made to help improve autoscaling.

Development and evaluation of a semiautomatic segmentation method for the estimation of LV parameters on cine MR images

NASA Astrophysics Data System (ADS)

Mazonakis, Michalis; Grinias, Elias; Pagonidis, Konstantin; Tziritas, George; Damilakis, John

2010-02-01

The purpose of this study was to develop and evaluate a semiautomatic method for left ventricular (LV) segmentation on cine MR images and subsequent estimation of cardiac parameters. The study group comprised cardiac MR examinations of 18 consecutive patients with known or suspected coronary artery disease. The new method allowed the automatic detection of the LV endocardial and epicardial boundaries on each short-axis cine MR image using a Bayesian flooding segmentation algorithm and weighted least-squares B-splines minimization. Manual editing of the automatic contours could be performed for unsatisfactory segmentation results. The end-diastolic volume (EDV), end-systolic volume (ESV), ejection fraction (EF) and LV mass estimated by the new method were compared with the reference values obtained by manually tracing the LV cavity borders. The reproducibility of the new method was determined using data from two independent observers. The mean number of endocardial and epicardial outlines not requiring any manual adjustment was more than 80% and 76% of the total contour number per study, respectively. The mean segmentation time including the required manual corrections was 2.3 ± 0.7 min per patient. LV volumes estimated by the semiautomatic method were significantly lower than those by manual tracing (P < 0.05), whereas no difference was found for EF and LV mass (P > 0.05). LV indices estimated by the two methods were well correlated (r >= 0.80). The mean difference between manual and semiautomatic method for estimating EDV, ESV, EF and LV mass was 6.1 ± 7.2 ml, 3.0 ± 5.2 ml, -0.6 ± 4.3% and -6.2 ± 12.2 g, respectively. The intraobserver and interobserver variability associated with the semiautomatic determination of LV indices was 0.5-1.2% and 0.8-3.9%, respectively. The estimation of LV parameters with the new semiautomatic segmentation method is technically feasible, highly reproducible and time effective.

Automated selected reaction monitoring software for accurate label-free protein quantification.

PubMed

Teleman, Johan; Karlsson, Christofer; Waldemarson, Sofia; Hansson, Karin; James, Peter; Malmström, Johan; Levander, Fredrik

2012-07-06

Selected reaction monitoring (SRM) is a mass spectrometry method with documented ability to quantify proteins accurately and reproducibly using labeled reference peptides. However, the use of labeled reference peptides becomes impractical if large numbers of peptides are targeted and when high flexibility is desired when selecting peptides. We have developed a label-free quantitative SRM workflow that relies on a new automated algorithm, Anubis, for accurate peak detection. Anubis efficiently removes interfering signals from contaminating peptides to estimate the true signal of the targeted peptides. We evaluated the algorithm on a published multisite data set and achieved results in line with manual data analysis. In complex peptide mixtures from whole proteome digests of Streptococcus pyogenes we achieved a technical variability across the entire proteome abundance range of 6.5-19.2%, which was considerably below the total variation across biological samples. Our results show that the label-free SRM workflow with automated data analysis is feasible for large-scale biological studies, opening up new possibilities for quantitative proteomics and systems biology.

Kansas highway LED illumination manual : a guide for the use of LED lighting systems : [technical summary].

DOT National Transportation Integrated Search

2015-12-01

The research project was aimed to assist the Kansas Department of Transportation (KDOT) in the development of a Highway LED Illumination Manual for guiding the upcoming implementation of successful LED roadway lighting systems in Kansas to replace th...

Opticalman 1 and C, Rate Training Manual.

ERIC Educational Resources Information Center

Naval Personnel Program Support Activity, Washington, DC.

The technical subject matter of this rate training manual is written for regular navy and naval reserve personnel. Responsibilities for optical shop administration, supervision, and training are discussed in detail. Metals are studied in connection with heat treating processes. Characteristics of light are analyzed to familiarize students with…

Software Manuals: Where Instructional Design and Technical Writing Join Forces.

ERIC Educational Resources Information Center

Thurston, Walter, Ed.

1986-01-01

Presents highlights from a panel discussion by well known San Francisco Bay area documentation writers, instructional designers, and human performance technologists. Three issues on user performance and documentation are addressed: whether people avoid reading user manuals and why; major human factors influencing documentation use; and…

Iowa Bridge Backwater Software : users manual IHRB TR-564, version 2.0, June 2010.

DOT National Transportation Integrated Search

2010-06-01

This manual describes how to use the Iowa Bridge Backwater software. It also documents the methods and equations used for the calculations. The main body describes how to use the software and the appendices cover technical aspects. : The Bridge Backw...

TECHNICAL MANUAL: A SURVEY OF EQUIPMENT AND METHODS FOR PARTICULATE SAMPLING IN INDUSTRIAL PROCESS STREAMS

EPA Science Inventory

The manual lists and describes the instruments and techniques that are available for measuring the concentration or size distribution of particles suspended in process streams. The standard, official, well established methods are described as well as some experimental methods and...

Utilitiesman 3 and 2. Rate Training Manual. Revised 1973.

ERIC Educational Resources Information Center

Naval Training Command, Pensacola, FL.

This Rate Training Manual provides the technical knowledge and skill requirements necessary to prepare Utilitiesmen to perform tasks involved in the installation, maintenance, and repair of plumbing, heating, steam, fuel storage and distribution systems, water treatment and distribution systems, air conditioning and refrigeration equipment, and…

Day Care Infection Control Protocol.

ERIC Educational Resources Information Center

Seattle-King County Dept. of Public Health, Seattle, WA.

This day care infection control manual was assembled to provide technical guidance for the prevention and control of communicable diseases to child day care facilities in Seattle and King County, Washington. For each disease, the manual provides background information, public health control recommendations, and letters that can be used to…

Hydrogen Financial Analysis Scenario Tool (H2FAST) Documentation

Science.gov Websites

for the web and spreadsheet versions of H2FAST. H2FAST Web Tool User's Manual H2FAST Spreadsheet Tool User's Manual (DRAFT) Technical Support Send questions or feedback about H2FAST to H2FAST@nrel.gov. Home

Aligning Theme and Information Structure to Improve the Readability of Technical Writing

ERIC Educational Resources Information Center

Moore, N. A. J.

2006-01-01

The readability of technical writing, and technical manuals in particular, especially for second language readers, can be noticeably improved by pairing Theme with Given and Rheme with New. This allows for faster processing of text and easier access to the "method of development" of the text. Typical Theme-Rheme patterns are described, and the…

Administrators' Perceptions of Career and Technical Education

ERIC Educational Resources Information Center

Haussman, Charles E.

2012-01-01

Career and technical education was founded on the common practice of apprenticeships integrated into the public schools at the beginning of the 20th century as manual arts, which continued to evolve into a culture and practice of its own as vocational education, and into what is now career and technical education, with an evolving focus on college…

Manual of Military Decorations and Awards: General Information, Medal of Honor, and Defense/Joint Decorations and Awards. Volume 1

DTIC Science & Technology

2010-11-23

Executive Order 12019, “Establishing the Defense Meritorious Service Medal,” November 3, 1977 ( z ) “United States Government Manual 2009/2010...United States Government Manual 2008/2009 (Reference ( z )). (b) The DJS, for the Chairman of the Joint Chiefs of Staff, for Service members assigned...the independent establishments and Government corporations. (See Reference ( z )). (b) The DJS, for the Chairman of the Joint Chiefs of Staff

Braille Instruction and Writing Equipment: Reference Circular 86-3.

ERIC Educational Resources Information Center

Library of Congress, Washington, DC. National Library Service for the Blind and Physically Handicapped.

This reference circular lists selected braille instructional materials and braille writing equipment and supplies currently available for purchase. A total of eight braille code books, seven instruction manuals for braille transcribing, and 17 instructional manuals for braille reading are listed. Suggestions are presented about braille instruction…

The Comprehensive Competencies Program Reference Manual. Volume I. Introduction.

ERIC Educational Resources Information Center

Taggart, Robert

Chapter 1 of this reference manual is a summary of the comprehensive competencies program (CCP). It describes this system for organizing, implementing, managing, and efficiently delivering individualized self-paced instruction, combined with group and experience-based learning activities, using computer-assisted instruction. (The CCP covers not…

Using Functional Flow Diagrams to Enhance Technical Systems Understanding.

ERIC Educational Resources Information Center

Satchwell, Richard E.

1997-01-01

A treatment group of 20 aviation students used training manuals that presented functional flow diagrams before schematic diagrams. Comparison of data from 10 controls on a card-sort task showed that functional flow diagrams enhanced understanding of technical systems. (SK)

Effluent Monitoring Procedures: Nutrients. Student Reference Manual.

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC. Office of Water Programs.

This is one of several short-term courses developed to assist in the training of waste water treatment plant operational personnel in the tests, measurements, and report preparation required for compliance with their NPDES Permits. The Student Reference Manual provides step-by-step procedures for laboratory application of equipment operating…

Math for Success in Electronics. Instructor's Guide. Reference Manual.

ERIC Educational Resources Information Center

DeVantier, Connie; And Others

This document contains both an instructor's guide and a reference manual. It was developed as part of a cooperative venture between Industrial Technology Institute (ITI), Wayne County (Michigan) Community College, and Great Lakes Steel (GLS). The instructor's guide has four sections: math for success in electronics, student materials, electronics…

Effluent Monitoring Procedures: Metals Analyses. Student Reference Manual.

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC. Office of Water Programs.

This is one of several short-term courses developed to assist in the training of waste water treatment plant operational personnel in the tests, measurements, and report preparation required for compliance with their NPDES Permits. The Student Reference Manual provides step-by-step procedures for laboratory application of equipment operating…

Education. Louisiana MSRTS Manual. Bulletin 1712.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Bureau of Migrant Education.

Written for Migrant Student Records Transfer System (MSRTS) specialists, this manual provides information to help them generate, translate, interpret, use, and update a migrant child's educational record. The manual serves as a reference to be used in conjunction with the National MSRTS User's Manual and as initial orientation and subsequent guide…

Manual search approaches used by systematic reviewers in dermatology.

PubMed

Vassar, Matt; Atakpo, Paul; Kash, Melissa J

2016-10-01

Manual searches are supplemental approaches to database searches to identify additional primary studies for systematic reviews. The authors argue that these manual approaches, in particular hand-searching and perusing reference lists, are often considered the same yet lead to different outcomes. We conducted a PubMed search for systematic reviews in the top 10 dermatology journals (January 2006-January 2016). After screening, the final sample comprised 292 reviews. Statements related to manual searches were extracted from each review and categorized by the primary and secondary authors. Each statement was categorized as either "Search of Reference List," "Hand Search," "Both," or "Unclear." Of the 292 systematic reviews included in our sample, 143 reviews (48.97%) did not report a hand-search or scan of reference lists. One-hundred thirty-six reviews (46.58%) reported searches of reference lists, while 4 reviews (1.37%) reported systematic hand-searches. Three reviews (1.03%) reported use of both hand-searches and scanning reference lists. Six reviews (2.05%) were classified as unclear due to vague wording. Authors of systematic reviews published in dermatology journals in our study sample scanned reference lists more frequently than they conducted hand-searches, possibly contributing to biased search outcomes. We encourage systematic reviewers to routinely practice hand-searching in order to minimize bias.

Nursery Production, A Teacher's Manual.

ERIC Educational Resources Information Center

Buckey, Sylvia; And Others

Developed by a group of university faculty members and graduate assistants, this planning guide is designed for teachers' use in high school, technical school, and associate degree agriculture programs in teaching nursery production with the focus on entry and advanced level occupations. This manual consists of the text of the student handbook…

Training and Development for Transitional Employment in Mature-Aged Manual Workers

ERIC Educational Resources Information Center

Pillay, Hitendra; Kelly, Kathy; Tones, Megan

2010-01-01

Objectives: The purpose of the current article was to explore perceptions of transitional employment and training and development amongst blue collar workers employed in technical, trade, operations or physical and labour-intensive occupations within the local government system. Methods: The responses of manual workers to two national surveys…

Practical Electronics. Technical Instruction Manual.

ERIC Educational Resources Information Center

Systems Operation Support, Inc., King of Prussia, PA.

This student instruction manual was developed as a part of "A Study of The Effectiveness of a Military-Type Computer-Based Instructional System When Used in Civilian High School Courses in Electronics and Auto Mechanics." (VT 006 916). The material emphasizes a troubleshooting strategy for repair of equipment based upon a logical and systematic…

Community College General Academic Course Guide Manual.

ERIC Educational Resources Information Center

Texas Higher Education Coordinating Board, Austin. Div. of Community and Technical Colleges.

The Community College General Academic Course Guide Manual (ACGM) is the official list of approved numbers for general academic transfer courses that may be offered by public community and technical colleges in Texas for state funding. This edition of the ACGM, effective September 1996, contains the latest information available for academic…

76 FR 57716 - Notice of Availability of a Draft Companion Manual for Executive Order 11988 Floodplain...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... companion manual to provide agency-wide guidance for executing compliance with Executive Order 11988... procedures and guidance in accordance with specific sections of Executive Order 11988 and Executive Order.... ADDRESSES: Written comments should be sent to Emily Johannes, Senior Environmental Technical Advisor, NOAA...

Manual Training Schools in America.

ERIC Educational Resources Information Center

Schenck, John P.

John Runkle, president of the Massachusetts Institute of Technology (MIT), viewed the Moscow Imperial Technical School exhibit at the Philadelphia Centennial Exposition of 1876 and saw the Russian method of manual training as the answer to the dilemma of combining theory and practice in engineering instruction. On August 17, 1876, shops in which…

APTI Course 427, Combustion Evaluation. Student Manual.

ERIC Educational Resources Information Center

Beard, J. Taylor; And Others

This student manual supplements a course designed to present fundamental and applied aspects of combustion technology which influence air pollutant emissions. Emphasis is placed on process control of combustion rather than on gas cleaning. The course is intended to provide engineers, regulatory and technical personnel, and others with familiarity…

12 CFR 792.03 - How will I know which records to request?

Code of Federal Regulations, 2010 CFR

2010-01-01

... the convenience of possible users and does not constitute a determination that all of the items listed... cost. The indices are: (a) NCUA Publications List: Manuals relating to general and technical... Instructions, Bulletins, Letters to Credit Unions, and certain internal manuals. (c) Popular FOIA Index...

Pneumatics. Student's Manual [and] Instructor's Guide.

ERIC Educational Resources Information Center

Notgrass, Troy

The student's manual in this two-part instructional kit is designed to help the following types of students learn introductory technical material related to pneumatics: (1) groups of trade and industrial students with a variety of vocational objectives and (2) homogeneous groups in which the learning levels of individual students vary…

Technical Data for Five Learning Style Instruments with Instructional Applications.

ERIC Educational Resources Information Center

Lemire, David

This manual presents five learning styles instruments and presents data related to validity and reliability and descriptive statistics. The manual also discusses the implications for learning presented by each of these learning models. For purposes of this discussion, "learning style,""cognitive style," and "personal style" are used synonymously.…

Stationary Engineering Laboratory Manual--2.

ERIC Educational Resources Information Center

Steingress, Frederick M.; Frost, Harold J.

The Stationary Engineering Laboratory Manual 2 was designed for vocational/technical high school students who have received instruction in the basics of stationary engineering. It was developed for students who will be operating a live plant and who will be responsible for supplying steam for heating, cooking, and baking. Each lesson in the manual…

ENVIRONMENTAL MONITORING AND ASSESSMENT - GREAT RIVER ECOSYSTEMS PROGRAM (EMAP-GRE) GREAT RIVER ECOSYSTEMS FIELD OPERATIONS MANUAL

EPA Science Inventory

This manual describes procedures for collecting samples and field measurements for biotic assemblages and abiotic characteristics of the Great Rivers of the Central Basin of the United States: the Missouri, Upper Mississippi, and Ohio Rivers. In addition to the technical and logi...

Technical Manual for Batteries, Navy Lithium Safety Program Responsibilities and Procedures

DTIC Science & Technology

2004-08-19

lithium ion batteries and all equipment powered by lithium electrochemical power source(s) through all phases of the life of such systems. The purpose of this manual is to establish safety guidelines for the selection, design, testing, evaluation, use, packaging, storage, transportation and disposal of lithium

Creating a Market.

ERIC Educational Resources Information Center

Kazimirski, J.; And Others

The second in a series of programmed books, "Creating a Market" is published by the International Labour Office as a manual for persons studying marketing. This manual was designed to meet the needs of the labor organization's technical cooperation programs and is primarily concerned with consumer goods industries. Using a fill-in-the-blanks and…

Health Activities for Primary School Students.

ERIC Educational Resources Information Center

Peace Corps, Washington, DC. Information Collection and Exchange Div.

This manual targets new and second-year Peace Corps volunteers, presenting health lessons and activities for primary school students in Thailand. Each section of the manual outlines basic technical information about the topic, contains several detailed lesson plans, and lists quick activities that can be carried out at schools. Songs and recipes…

Principles of Training in Marine Corps Task Analysis. Training Manual I. Evaluation of the Marine Corps Task Analysis Program. Technical Report No. 7.

ERIC Educational Resources Information Center

Kuriloff, Arthur H.

This is the first in a series of five training manuals developed for use by the U.S. Marine Corps Office of Manpower Utilization (OMU) in its Task Analysis (TA) program. It is designed for trainers of OMU staff members assigned to the TA program, a research effort requiring interpersonal and research competence. Objectives of the manual are: (1)…

Referred pain elicited by manual exploration of the lateral rectus muscle in chronic tension-type headache.

PubMed

Fernández-de-Las-Peñas, César; Cuadrado, Maria Luz; Gerwin, Robert D; Pareja, Juan A

2009-01-01

To analyze the presence of referred pain elicited by manual examination of the lateral rectus muscle in patients with chronic tension-type headache (CTTH). A case-control blinded study. It has been found previously that the manual examination of the superior oblique muscle can elicit referred pain to the head in some patients with migraine or tension-type headache. However, a referred pain from other extraocular muscles has not been investigated. Fifteen patients with CTTH and 15 healthy subjects without headache history were included. A blinded assessor performed a manual examination focused on the search for myofascial trigger points (TrPs) in the right and left lateral rectus muscles. TrP diagnosis was made when there was referred pain evoked by maintained pressure on the lateral corner of the orbit (anatomical projection of the lateral rectus muscle) for 20 seconds, and increased referred pain while the subject maintained a medial gaze on the corresponding side (active stretching of the muscle) for 15 seconds. On each side, a 10-point numerical pain rate scale was used to assess the intensity of referred pain at both stages of the examination. Ten patients with CTTH (66.6%) had referred pain that satisfied TrPs diagnostic criteria, while only one healthy control (0.07%) reported referred pain upon the examination of the lateral rectus muscles (P < 0.001). The elicited referred pain was perceived as a deep ache located at the supraorbital region or the homolateral forehead. Pain was evoked on both sides in all subjects with TrPs, with no difference in pain intensity between the right and the left. The average pain intensity was significantly greater in the patient group (P < 0.001). All CTTH patients with referred pain recognized it as the frontal pain that they usually experienced during their headache attacks, which was consistent with active TrPs. In some patients with CTTH, the manual examination of lateral rectus muscle TrPs elicits a referred pain that extends to the supraorbital region or the homolateral forehead. Nociceptive inputs from the extraocular muscles may sustain the activation of trigeminal neuron, thus sensitizing central pain pathways and exacerbating headache.

NASTRAN user's guide (Level 17.5)

NASA Technical Reports Server (NTRS)

Field, E. I.; Herting, D. N.; Morgan, M. J.

1979-01-01

The user's guide is a handbook for engineers and analysts who use the NASTRAN finite element computer program supplements the NASTRAN Theoretical Manual (NASA SP-221), the NASTRAN User's Manual (NASA SP-222), the NASTRAN Programmer's Manual (NASA SP-223), and the NASTRAN Demonstration Program Manual (NASA SP-224). It provides modeling hints, attributes of the program, and references to the four manuals listed.

Robotic-Assisted Versus Manual Prostatic Arterial Embolization for Benign Prostatic Hyperplasia: A Comparative Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bagla, Sandeep, E-mail: sandeep.bagla@gmail.com; Smirniotopoulos, John; Orlando, Julie C.

PurposeProstatic artery embolization (PAE) is a safe and efficacious procedure for benign prostatic hyperplasia (BPH), though is technically challenging. We present our experience of technical and clinical outcomes of robotic and manual PAE in patients with BPH.Materials and MethodsIRB-approved retrospective study of 40 consecutive patients 49–81 years old with moderate or severe grade BPH from May 2014 to July 2015: 20 robotic-assisted PAE (group 1), 20 manual PAE (group 2). Robotic-assisted PAE was performed using the Magellan Robotic System. American Urological Association (AUA-SI) score, cost, technical and clinical success, radiation dose, fluoroscopy, and procedure time were reviewed. Statistical analysis was performedmore » within and between each group using paired t test and one-way analysis of variance respectively, at 1 and 3 months.ResultsNo significant baseline differences in age and AUA-SI between groups. Technical success was 100% (group 1) and 95% (group 2). One unsuccessful subject from group 2 returned for a successful embolization using robotic assistance. Fluoroscopy and procedural times were similar between groups, with a non-significant lower patient radiation dose in group 1 (30,632.8 mGy/cm{sup 2} vs 35,890.9, p = 0.269). Disposable cost was significantly different between groups with the robotic-assisted PAE incurring a higher cost (group 1 $4530.2; group 2 $1588.5, p < 0.0001). Clinical improvement was significant in both arms at 3 months: group 1 mean change in AUA-SI of 8.3 (p = 0.006), group 2: 9.6 (p < 0.0001). No minor or major complications occurred.ConclusionsRobotic-assisted PAE offers technical success comparable to manual PAE, with similar clinical improvement with an increased cost.« less

Whither the White Knight: CDROM in Technical Services.

ERIC Educational Resources Information Center

Campbell, Brian

1987-01-01

Outlines evaluative criteria and compares optical data disk products used in library technical processes, including bibliographic records for cataloging, acquisition databases, and local public access catalogs. An extensive table provides information on specific products, including updates, interfaces, edit screens, installation help, manuals,…

NUSC Technical Publications Guide.

DTIC Science & Technology

1985-05-01

Facility personnel especially that of A. Castelluzzo, E. Deland, J. Gesel , and E. Szlosek (all of Code 4343). Reviewed and Approved: 14 July 1980 D...their technical content and format. Review and approve the manual outline, the review manuscript, and the final camera - reproducible copy. Conduct in

48 CFR 811.107 - Contract clauses.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Section 811.107 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS COMPETITION AND... requests for proposals for technical medical and other technical equipment and devices issued by a field facility unless the facility Chief, Engineering Service, indicates that the service data manuals are not...

Thermal spray manual for machinery components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Travis, R.; Ginther, C.; Herbstritt, M.

1995-12-31

The Thermal Spray Manual For Machinery Components is a National Shipbuilding Research (SP-7) Project. This Manual is being developed by Puget Sound Naval Shipyard with the help of other government thermal spray facilities and SP-7 panel members. The purpose of the manual is to provide marine repair facilities with a ``how to do`` document that will be ``user friendly`` and known to be technically sound through production experience. The manual`s intent is to give marine repair facilities the ability to maximize the thermal spray process as a repair method for machinery components and to give these facilities guidelines on howmore » to become qualified to receive certification that they meet the requirements of Military Standard 1687A.« less

Sampling large landscapes with small-scale stratification-User's Manual

USGS Publications Warehouse

Bart, Jonathan

2011-01-01

This manual explains procedures for partitioning a large landscape into plots, assigning the plots to strata, and selecting plots in each stratum to be surveyed. These steps are referred to as the "sampling large landscapes (SLL) process." We assume that users of the manual have a moderate knowledge of ArcGIS and Microsoft ® Excel. The manual is written for a single user but in many cases, some steps will be carried out by a biologist designing the survey and some steps will be carried out by a quantitative assistant. Thus, the manual essentially may be passed back and forth between these users. The SLL process primarily has been used to survey birds, and we refer to birds as subjects of the counts. The process, however, could be used to count any objects. ®

Internal combustion engines for alcohol motor fuels: a compilation of background technical information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blaser, Richard

1980-11-01

This compilation, a draft training manual containing technical background information on internal combustion engines and alcohol motor fuel technologies, is presented in 3 parts. The first is a compilation of facts from the state of the art on internal combustion engine fuels and their characteristics and requisites and provides an overview of fuel sources, fuels technology and future projections for availability and alternatives. Part two compiles facts about alcohol chemistry, alcohol identification, production, and use, examines ethanol as spirit and as fuel, and provides an overview of modern evaluation of alcohols as motor fuels and of the characteristics of alcoholmore » fuels. The final section compiles cross references on the handling and combustion of fuels for I.C. engines, presents basic evaluations of events leading to the use of alcohols as motor fuels, reviews current applications of alcohols as motor fuels, describes the formulation of alcohol fuels for engines and engine and fuel handling hardware modifications for using alcohol fuels, and introduces the multifuel engines concept. (LCL)« less

Reference manual for the Thermal Analyst's Help Desk Expert System

NASA Technical Reports Server (NTRS)

Ormsby, Rachel A.

1994-01-01

This document provides technical information and programming guidance for the maintenance and future development of the Thermal Analyst's Help Desk. Help Desk is an expert system that operates within the EXSYSTM expert system shell, and is used to determine first approximations of thermal capacity for spacecraft and instruments. The five analyses supported in Help Desk are: (1) surface area required for a radiating surface, (2) equilibrium temperature of a surface, (3) enclosure temperature and heat loads for a defined position in orbit, (4) enclosure temperature and heat loads over a complete orbit and, (5) selection of appropriate surface properties. The two geometries supported by Help Desk are a single flat plate and a rectangular box enclosure. The technical information includes the mathematical approach and analytical derivations used in the analyses such as: radiation heat balance, view factor calculation, and orbit determination with coordinate transformation. The programming guide for developers describes techniques for enhancement of Help Desk. Examples are provided showing the addition of new features, user interface development and enhancement, and external program interfaces.

Phantom Study Investigating the Accuracy of Manual and Automatic Image Fusion with the GE Logiq E9: Implications for use in Percutaneous Liver Interventions.

PubMed

Burgmans, Mark Christiaan; den Harder, J Michiel; Meershoek, Philippa; van den Berg, Nynke S; Chan, Shaun Xavier Ju Min; van Leeuwen, Fijs W B; van Erkel, Arian R

2017-06-01

To determine the accuracy of automatic and manual co-registration methods for image fusion of three-dimensional computed tomography (CT) with real-time ultrasonography (US) for image-guided liver interventions. CT images of a skills phantom with liver lesions were acquired and co-registered to US using GE Logiq E9 navigation software. Manual co-registration was compared to automatic and semiautomatic co-registration using an active tracker. Also, manual point registration was compared to plane registration with and without an additional translation point. Finally, comparison was made between manual and automatic selection of reference points. In each experiment, accuracy of the co-registration method was determined by measurement of the residual displacement in phantom lesions by two independent observers. Mean displacements for a superficial and deep liver lesion were comparable after manual and semiautomatic co-registration: 2.4 and 2.0 mm versus 2.0 and 2.5 mm, respectively. Both methods were significantly better than automatic co-registration: 5.9 and 5.2 mm residual displacement (p < 0.001; p < 0.01). The accuracy of manual point registration was higher than that of plane registration, the latter being heavily dependent on accurate matching of axial CT and US images by the operator. Automatic reference point selection resulted in significantly lower registration accuracy compared to manual point selection despite lower root-mean-square deviation (RMSD) values. The accuracy of manual and semiautomatic co-registration is better than that of automatic co-registration. For manual co-registration using a plane, choosing the correct plane orientation is an essential first step in the registration process. Automatic reference point selection based on RMSD values is error-prone.

Process Control Manual for Aerobic Biological Wastewater Treatment Facilities.

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC. Office of Water Programs.

This Environmental Protection Agency (EPA) publication is an operations manual for activated sludge and trickling filter wastewater treatment facilities. The stated purpose of the manual is to provide an on-the-job reference for operators of these two types of treatment plants. The overall objective of the manual is to aid the operator in…

A Course on Operational Considerations in Wastewater Treatment Plant Design. Instructor's Manual.

ERIC Educational Resources Information Center

Cooper, John W.; And Others

This manual contains 17 instructional units (sequenced to correspond to parallel chapters in a student's manual) focusing on upgrading the design of wastewater plant facilities and serving as a reference source for establishing criteria for upgrading wastewater treatment plants. The manual also furnishes information for modifying plant design to…

REFERENCE MANUAL FOR RASSMIT VERSION 2.1: SUB-SLAB DEPRESSURIZATION SYSTEM DESIGN PERFORMANCE SIMULATION PROGRAM

EPA Science Inventory

The report is a reference manual for RASSMlT Version 2.1, a computer program that was developed to simulate and aid in the design of sub-slab depressurization systems used for indoor radon mitigation. The program was designed to run on DOS-compatible personal computers to ensure ...

Self-Monitoring Procedures: Basic Parameters for Municipal Effluents. Student Reference Manual.

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC. Office of Water Programs.

This is one of several short-term courses developed to assist in the training of waste water treatment plant operational personnel in the tests, measurements, and report preparation required for compliance with their NPDES Permits. The Student Reference Manual provides step-by-step procedures for laboratory application of equipment operating…

Effluent-Monitoring Procedures: Basic Laboratory Skills. Student Reference Manual.

ERIC Educational Resources Information Center

Engel, William T.; And Others

This is one of several short-term courses developed to assist in the training of waste water treatment plant operational personnel in the tests, measurements, and report preparation required for compliance with their NPDES Permits. This Student Reference Manual provides a review of basic mathematics as it applies to the chemical laboratory. The…

APEX (Air Pollution Exercise) Volume 20: Reference Materials.

ERIC Educational Resources Information Center

Environmental Protection Agency, Research Triangle Park, NC. Office of Manpower Development.

The Reference Materials Manual is part of a set of 21 manuals (AA 001 009-001 029) used in APEX (Air Pollution Exercise), a computerized college and professional level "real world" game simulation of a community with urban and rural problems, industrial activities, and air pollution difficulties. For the purposes of the gaming exercise, APEX…

Technical note: A simple approach for efficient collection of field reference data for calibrating remote sensing mapping of northern wetlands

NASA Astrophysics Data System (ADS)

Gålfalk, Magnus; Karlson, Martin; Crill, Patrick; Bousquet, Philippe; Bastviken, David

2018-03-01

The calibration and validation of remote sensing land cover products are highly dependent on accurate field reference data, which are costly and practically challenging to collect. We describe an optical method for collection of field reference data that is a fast, cost-efficient, and robust alternative to field surveys and UAV imaging. A lightweight, waterproof, remote-controlled RGB camera (GoPro HERO4 Silver, GoPro Inc.) was used to take wide-angle images from 3.1 to 4.5 m in altitude using an extendable monopod, as well as representative near-ground (< 1 m) images to identify spectral and structural features that correspond to various land covers in present lighting conditions. A semi-automatic classification was made based on six surface types (graminoids, water, shrubs, dry moss, wet moss, and rock). The method enables collection of detailed field reference data, which is critical in many remote sensing applications, such as satellite-based wetland mapping. The method uses common non-expensive equipment, does not require special skills or training, and is facilitated by a step-by-step manual that is included in the Supplement. Over time a global ground cover database can be built that can be used as reference data for studies of non-forested wetlands from satellites such as Sentinel 1 and 2 (10 m pixel size).

TFaNS Tone Fan Noise Design/Prediction System. Volume 1; System Description, CUP3D Technical Documentation and Manual for Code Developers

NASA Technical Reports Server (NTRS)

Topol, David A.

1999-01-01

TFaNS is the Tone Fan Noise Design/Prediction System developed by Pratt & Whitney under contract to NASA Lewis (presently NASA Glenn). The purpose of this system is to predict tone noise emanating from a fan stage including the effects of reflection and transmission by the rotor and stator and by the duct inlet and nozzle. These effects have been added to an existing annular duct/isolated stator noise prediction capability. TFaNS consists of: The codes that compute the acoustic properties (reflection and transmission coefficients) of the various elements and write them to files. Cup3D: Fan Noise Coupling Code that reads these files, solves the coupling problem, and outputs the desired noise predictions. AWAKEN: CFD/Measured Wake Postprocessor which reformats CFD wake predictions and/or measured wake data so it can be used by the system. This volume of the report provides technical background for TFaNS including the organization of the system and CUP3D technical documentation. This document also provides information for code developers who must write Acoustic Property Files in the CUP3D format. This report is divided into three volumes: Volume I: System Description, CUP3D Technical Documentation, and Manual for Code Developers; Volume II: User's Manual, TFaNS Vers. 1.4; Volume III: Evaluation of System Codes.

Developing Community-Based Learning Centers for Older Adults. A Technical Assistance Manual.

ERIC Educational Resources Information Center

Sprouse, Betsy M.; Brown, Karen

Designed for community groups and organizations, groups of older adults, senior clubs, and agencies, this manual documents the process of developing community education programs for older adults. The first section introduces the concept of a community learning center, while the second section considers whether a learning center should be…

Laboratory Manual (For Concrete Instruction Course); Instructor's Guide, Pilot Program Edition.

ERIC Educational Resources Information Center

Portland Cement Association, Cleveland, OH.

This laboratory manual, prepared for a 2-year program in junior colleges and technical institutes, is designed to accompany the instructional materials to train persons for employment as technicians in the cement and concrete industries. Included are 16 laboratory assignments for each of the following: (1) Principles of Concrete, (2) Concrete in…

75 FR 52625 - Amendment to the International Traffic in Arms Regulations: Export Exemption for Technical Data

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-27

... the provisions of the Department of Defense National Industrial Security Program Operating Manual, an... Department of Defense National Industrial Security Program Operating Manual (unless such requirements are in..., Arms Control and International Security, Department of State. [FR Doc. 2010-21450 Filed 8-26-10; 8:45...

Simplified Procedures for Eutrophication Assessment and Prediction: User Manual

DTIC Science & Technology

1996-09-01

1975), for use in the Lake Erie Wastewater Management Study and is described by Verhoff, Yaksich, and Melfi (1980) and Westerdahl et al. (1981). This...manual," Technical Re- port E-81-9, U.S. Army Engineer Waterways Experiment Station, Vicksburg, MS. Westerdahl , H. E., Ford, W. B., Harris, J., and

Information Manual: Procedures, Planning Concepts, Subsystems. ABS Publication No. 3.

ERIC Educational Resources Information Center

California Univ., Berkeley.

This report, the third in a series which presents the results of a systems analysis of the problem of providing science and engineering buildings at the university level, is a technical manual for using the Academic Building Systems (ABS) approach in programing, designing, and constructing such facilities. The document presents (1) planning…

Calibration of the Highway Safety Manual and development of new safety performance functions for rural multilane highways in Kansas : technical summary.

DOT National Transportation Integrated Search

2016-10-01

Rural roads account for 90.3% of the 140,476 total centerline miles of roadways : in Kansas. In recent years, rural fatal crashes have accounted for about 66% : of all fatal crashes. The Highway Safety Manual (HSM) provides models and : methodologies...

Bibliography for Advancement Examination Study. 1994 Edition

DTIC Science & Technology

1993-04-01

Management (3M) Manual, OPNAVINST 4790.4 --Chapters 2 and 9 Technical Manual for Limitorque Valve Operators, NAVSEA S6435- PB -MMA-010/52374 4 Aviation...when issued.) * NRTC : MR 3&d’, NAVEDTRA 82204 (To be replaced by MR, NAVEDTRA 82204-A, when issued.) Mathematics, Vol 2-A, NAVEDTRA 10062 -- Chap 3

[Esophagojejunal anastomoses with the EEA stapler after total gastrectomy. Technic and immediate results apropos of a recent series of 32 cases].

PubMed

Le Treut, Y P; Delpero, J R; Sabiani, P; Berthet, B; Bozon-Verduraz, E; Pol, B; Bricot, R

1987-12-01

32 consecutive total gastrectomies for cancer (20 extended total gastrectomies) were carried out through an abdominal approach. Reconstruction using a Rouxen-Y loop (28 cases) or an interposed jejunal loop (four cases) was done with an EEA stapled oesophago jejunostomy: 25 end to side and 5 end to end anastomosis were performed and two technical failures led to complete manual anastomosis. All patients have had post-operative X-ray examination: there was no anastomotic leakage in this series, even in the 3 patients (10%) who have died during the post-operative course. A critical study of this series and eight others one from elsewhere is presented: it is concluded that the stapling device allows an easier and safer oesophagojejunostomy than manual procedure, when great care is taken of technical details.

Radiological control manual. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kloepping, R.

1996-05-01

This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPPmore » and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.« less

Radiographic technical quality of root canal treatment performed ex vivo by dental students at Valencia University Medical and Dental School, Spain

PubMed Central

Faus-Matoses, Vicente; Alegre-Domingo, Teresa; Faus-Llácer, Vicente J.

2014-01-01

Objectives: To evaluate radiographically the quality of root canal fillings and compare manual and rotary preparation performed on extracted teeth by undergraduate dental students. Study Design: A total of 561 premolars and molars extracted teeth were prepared using nickel-titanium rotary files or manual instrumentation and filled with gutta-percha using a cold lateral condensation technique, by 4th grade undergraduate students. Periapical radiographs were used to assess the technical quality of the root canal filling, evaluating three variables: length, density and taper. These data were recorded, scored and used to study the “technical success rate” and the “overall score”. The length of each root canal filling was classified as acceptable, short and overfilled, based on their relationship with the radiographic apex. Density and taper of filling were evaluated based on the presence of voids and the uniform tapering of the filling, respectively. Statistical analysis was used to evaluate the quality of root canal treatment, considering p < 0.05 as a statistical significant level. Results: The percentage of technical success was 44% and the overall score was 7.8 out of 10. Technical success and overall score were greater with rotary instruments (52% against 28% with a manual one, p < 0.001; 8.3 against 6.7 respectively, p < 0.001). Conclusions: It appears that inexperienced operators perform better root canal treatment (RCT) with the use of rotary instrumentation. Key words:Dental education, endodontics, rotary instrumentation, radiographs, root canal treatment, undergraduate students. PMID:24121911

VAPEPS user's reference manual, version 5.0

NASA Technical Reports Server (NTRS)

Park, D. M.

1988-01-01

This is the reference manual for the VibroAcoustic Payload Environment Prediction System (VAPEPS). The system consists of a computer program and a vibroacoustic database. The purpose of the system is to collect measurements of vibroacoustic data taken from flight events and ground tests, and to retrieve this data and provide a means of using the data to predict future payload environments. This manual describes the operating language of the program. Topics covered include database commands, Statistical Energy Analysis (SEA) prediction commands, stress prediction command, and general computational commands.

Techniques for predicting high-risk drivers for alcohol countermeasures. Volume 1, Technical report

DOT National Transportation Integrated Search

1979-05-01

This technical report, a companion to the Volume II User Manual by the same name describes the development and testing of predictive models for identifying individual with a high risk of alcohol/related (A/R) crash involvement. From a literature revi...

PDQ: Planning and Development of Quality Services in the Schools, Instructional Guide, Student Manual and Reference Materials.

ERIC Educational Resources Information Center

Wright, Sandra Raymore

The instructional guide, student manual, and reference materials were developed by the PDQ Project, Planning and Development of Quality Services in the Schools, an effort by the American Speech-Language-Hearing Association to provide public school personnel working with communication disordered children with information and training related to…

Introduction to Grassland Management. Instructor Guide, Student Reference [and] Crop and Grassland Plant Identification Manual.

ERIC Educational Resources Information Center

Suits, Susie

This packet contains an Instructor guide and student reference for a course in introduction to grassland management, as well as a crop and grassland plant identification manual. The three-unit curriculum contains the following 11 lessons: (unit I, grasslands and grassland plants): (1) an introduction to grasslands; (2) plant classification; (3)…

47 CFR 300.1 - Incorporation by reference of the Manual of Regulations and Procedures for Federal Radio...

Code of Federal Regulations, 2011 CFR

2011-10-01

... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...

47 CFR 300.1 - Incorporation by reference of the Manual of Regulations and Procedures for Federal Radio...

Code of Federal Regulations, 2010 CFR

2010-10-01

... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...

47 CFR 300.1 - Incorporation by reference of the Manual of Regulations and Procedures for Federal Radio...

Code of Federal Regulations, 2014 CFR

2014-10-01

... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The Federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...

47 CFR 300.1 - Incorporation by reference of the Manual of Regulations and Procedures for Federal Radio...

Code of Federal Regulations, 2013 CFR

2013-10-01

... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The Federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...

47 CFR 300.1 - Incorporation by reference of the Manual of Regulations and Procedures for Federal Radio...

Code of Federal Regulations, 2012 CFR

2012-10-01

... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...

NASIS data base management system: IBM 360 TSS implementation. Volume 5: Retrieval command system reference manual

NASA Technical Reports Server (NTRS)

1973-01-01

The retrieval command subsystem reference manual for the NASA Aerospace Safety Information System (NASIS) is presented. The command subsystem may be operated conversationally or in the batch mode. Retrieval commands are categorized into search-oriented and output-oriented commands. The characteristics of ancillary commands and their application are reported.

APEX (Air Pollution Exercise) Volume 21: Legal References: Air Pollution Control Regulations.

ERIC Educational Resources Information Center

Environmental Protection Agency, Research Triangle Park, NC. Office of Manpower Development.

The Legal References: Air Pollution Control Regulations Manual is the last in a set of 21 manuals (AA 001 009-001 029) used in APEX (Air Pollution Exercise), a computerized college and professional level "real world" game simulation of a community with urban and rural problems, industrial activities, and air pollution difficulties. The manual…

Load research manual. Volume 3. Load research for advanced technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brandenburg, L.; Clarkson, G.; Grund, Jr., C.

1980-11-01

This three-volume manual presents technical guidelines for electric utility load research. Special attention is given to issues raised by the load data reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. The manual includes guides to load research literature and glossaries of load research and statistical terms. In Volume 3, special load research procedures are presented for solar, wind, and cogeneration technologies.

A Study to Develop a Timeline for Sequencing the Major Transitional Tasks in the Fort Sill Hospital Transition Plan

DTIC Science & Technology

1988-07-01

efforts. 7. Ensure that transition planning materials and manuals are prepared. 8. Ensure proper orientation of staff. 9. Ensure all involved parties...software package which will integrate with the project methodology: User’s manual that is "user friendly". Tutorial with sample data for learning the...program. Menus for direction and assistance. On-line help to avoid constant referral to the manual . Technical support available via telephone. Demo

Learning Resources Evaluations Manual.

ERIC Educational Resources Information Center

Nunes, Evelyn H., Ed.

This manual contains evaluations of 196 instructional products listed in Virginia's Adult Basic Education Curricula Resource Catalog. It is intended as a convenient reference manual for making informed decisions concerning materials for adult learners in adult basic education, English-as-a-Second-Language instruction, and general educational…

MANUAL: GROUND-WATER AND LEACHATE TREATMENT SYSTEMS

EPA Science Inventory

This manual was developed for remedial design engineers and regulatory personnel who oversee the ex situ ground water or leachate treatment efforts of the regulated community. The manual can be used as a treatment technology screening tool in conjunction with other references. Mo...

An annotated outline for a traffic management center operations manual

DOT National Transportation Integrated Search

2000-10-01

This draft Traffic Management Center (TMC) and Operations manual outline is meant to serve as a model "checklist" for the development of similar manuals used in deployed environments. The purpose of this outline is to provide a reference for agencies...

NASA Space Mechanisms Handbook and Reference Guide Expanded Into CD-ROM Set

NASA Technical Reports Server (NTRS)

Fusaro, Robert L.

2002-01-01

Several NASA missions suffered failures and anomalies due to problems in applying space mechanisms technology to specific projects. Research shows that engineers often lack either adequate knowledge of mechanism design or sufficient understanding of how mechanisms affect sensitive systems. The Space Mechanisms Project conducted a Lessons Learned study and published a Space Mechanisms Handbook to help space industry engineers avoid recurring design, qualification, and application problems. The Space Mechanisms Handbook written at the NASA Glenn Research Center details the state-of-the-art in space mechanisms design as of 1998. NASA's objective in developing this Space Mechanisms Handbook was to provide readily accessible information on such areas as space mechanisms design, mechanical component availability and use, testing and qualification of mechanical systems, and a listing of worldwide space mechanisms experts and testing facilities in the United States. This handbook has been expanded into a two-volume CD-ROM set in an Adobe Acrobat format. In addition to the handbook, the CD's include (1) the two volume Space Mechanisms Lessons Learned Study, (2) proceedings from all the NASA hosted Aerospace Mechanisms Symposia held through the year 2000, (3) the Space Materials Handbook, (4) the Lubrication Handbook for the Space Industry, (5) the Structural & Mechanical Systems Long-Life Assurance Design Guidelines, (6) the Space Environments and Effects Source-Book, (7) the Spacecraft Deployable Appendages manual, (8) the Fastener Design Manual, (9) A Manual for Pyrotechnic Design, Development and Qualification, (10) the Report on Alternative Devices to Pyrotechnics on Spacecraft, and (11) Gearing (a manual). In addition, numerous other papers on tribology and lubrication are included.This technical summary of the project provides information on how to obtain the handbook and related information.

Performance of a New Portable Wireless Sleep Monitor

PubMed Central

Younes, Magdy; Soiferman, Marc; Thompson, Wayne; Giannouli, Eleni

2017-01-01

Study Objectives: To determine if signals generated by a new sleep monitor (Prodigy) are comparable to signals generated during in-laboratory polysomnography (PSG). Methods: Fifty-nine patients with various sleep disorders (25 with moderate/severe sleep apnea) were studied. Full PSG was performed using standard acquisition systems. Prodigy was attached to the forehead with four disposable snap electrodes. Four additional electrodes were attached to monitor eye movements and muscle activity, and to serve as reference (mastoid). One frontal EEG signal was outputted in real time from the monitor and stored in the PSG record along with the other PSG signals. PSG was scored for sleep variables manually, and monitor records were scored by a validated automatic system (MSS) (MSS-Prodigy). MSS-Prodigy was briefly edited following suggestions of an Editing Helper feature of MSS. Results: Technical failures resulted in one study being unusable and another with data for only 3 hours. Prodigy EEG signal stored in the PSG record was visually indistinguishable from the PSG-derived EEG signals. Important differences between manual scores and unedited MSS-Prodigy were seen in a few patients in some sleep variables (notably onset latencies and REM time). Editing Helper issued 2.1 ± 0.8 suggestions/file. Only these suggestions were pursued during editing. Intraclass correlation coefficients for manual vs. edited MSS-Prodigy were > 0.83 for all sleep variables except for stages N1 and N3 (0.57 and 0.58). Conclusions: When scored with MSS, and with only very minor editing, the monitor's results show excellent agreement with manual scoring of polysomnography data, even in patients with severe sleep disorders. Citation: Younes M, Soiferman M, Thompson W, Giannouli E. Performance of a new portable wireless sleep monitor. J Clin Sleep Med. 2017;13(2):245–258. PMID:27784419

Research in Automatic Russian-English Scientific and Technical Lexicography. Final Report.

ERIC Educational Resources Information Center

Wayne State Univ., Detroit, MI.

Techniques of reversing English-Russian scientific and technical dictionaries into Russian-English versions through semi-automated compilation are described. Sections on manual and automatic processing discuss pre- and post-editing, the task program, updater (correction of errors and revision by specialist in a given field), the system employed…

NASA STI Program Seminar: Electronic documents

NASA Technical Reports Server (NTRS)

1994-01-01

The theme of this NASA Scientific and Technical Information Program Seminar was electronic documents. Topics covered included Electronic Documents Management at the CASI, the Impact of Electronic Publishing on User Expectations and Searching Image Record Management, Secondary Publisher Considerations for Electronic Journal Literature, and the Technical Manual Publishing On Demand System (TMPODS).

Laboratory Training Manual on the Use of Nuclear Techniques in Pesticide Research. Technical Reports Series No. 225.

ERIC Educational Resources Information Center

International Atomic Energy Agency, Vienna (Austria).

Radiolabelled pesticides are used: in studies involving improved formulations of pesticides, to assist in developing standard residue analytical methodology, and in obtaining metabolism data to support registration of pesticides. This manual is designed to give the scientist involved in pesticide research the basic terms and principles for…

An Overview of Addiction Research Center Inventory Scales (ARCI): An Appendix and Manual of Scales.

ERIC Educational Resources Information Center

Haertzen, C.A.

The Addiction Research Center Inventory is a 550 item multipurpose test measuring the broad range of physical, emotive, cognitive, and subjective effects of drugs. This manual provides technical information concerning 38 most valid scales, a quantitative method for characterizing the similarity of a profile of scores for the subject, group, or…

Linking Development Benefits to Neighborhoods: A Manual of Community-Based Strategies. Technical Bulletin.

ERIC Educational Resources Information Center

Casale, Ellen

This manual collects experiences of successful linkage programs to demonstrate the promise of linkage and to show its limits and risks. It is intended to help communities assess the capacity of linkage to meet their needs and evaluate the considerable commitment this strategy requires. (In linkage programs, developers who receive community…

Technical Report and Data File User's Manual for the 1992 National Adult Literacy Survey.

ERIC Educational Resources Information Center

Kirsch, Irwin; Yamamoto, Kentaro; Norris, Norma; Rock, Donald; Jungeblut, Ann; O'Reilly, Patricia; Berlin, Martha; Mohadjer, Leyla; Waksberg, Joseph; Goksel, Huseyin; Burke, John; Rieger, Susan; Green, James; Klein, Merle; Campbell, Anne; Jenkins, Lynn; Kolstad, Andrew; Mosenthal, Peter; Baldi, Stephane

Chapter 1 of this report and user's manual describes design and implementation of the 1992 National Adult Literacy Survey (NALS). Chapter 2 reviews stages of sampling for national and state survey components; presents weighted and unweighted response rates for the household component; and describes non-incentive and prison sample designs. Chapter…

CDPOP Users Manual

Treesearch

E. L. Landguth; B. K. Hand; J. M. Glassy; S. A. Cushman; M. Jacobi; T. J. Julian

2011-01-01

The goal of this user manual is to explain the technical aspects of the current release of the CDPOP program. CDPOP v1.0 is a major extension of the CDPOP program (Landguth and Cushman 2010). CDPOP is an individual-based program that simulates the influences of landscape structure on emergence of spatial patterns in population genetic data as functions of individual-...

A Curriculum Guide for Medical Record Technologist. Final Report.

ERIC Educational Resources Information Center

Garozzo, Joyce

This curriculum guide was developed as a result of a project conducted in Pennsylvania to review, update, and revise the vocational-technical manual on file in the Pennsylvania Department of Education and to develop sample curriculum for the preparation of a medical record technologist program using the skills developed in the manual. The guide is…

Work in the Navy--A Description of Navy Officer and Enlisted Occupations. Technical Report No. 923.

ERIC Educational Resources Information Center

McDermott, Michael N.; And Others

The manual contains career guidance materials describing occupations and career development opportunities in the Navy. The materials were developed for integration into the Oregon Career Information System, a career education program utilizing both computerized and manual information systems. The report includes a discussion of the general work of…

CSPD Technical Manual: Procedures for Comprehensive Assessment of Educational Personnel Supply/Demand. 1990 Edition.

ERIC Educational Resources Information Center

Lauritzen, Paul; Friedman, Stephen

This manual presents procedures for collecting data to project personnel needs in the field of special education, addressing in part the Comprehensive System of Personnel Development requirements of Public Law 94-142. Implementation of the procedures identifies: areas of education that show need for additional teachers as well as areas of surplus;…

Educational Personnel Needs Assessment: CSPD Technical Manual, 1989. Critical Areas of Data Collection.

ERIC Educational Resources Information Center

Lauritzen, Paul

This manual addresses the Comprehensive System of Personnel Development (CSPD) requirement of Public Law 94-142. It presents model procedures for the collection of data necessary to project personnel needs in special education. Implementation of the model will identify: areas of education which show need for additional teachers as well as areas of…

Helping Children Affected by Substance Abuse: A Manual for the Head Start Management Team.

ERIC Educational Resources Information Center

Education Development Center, Washington, DC.

The manual contains technical assistance, information, and suggested strategies for staff who work with children enrolled in Head Start who are affected by substance abuse. The information is intended to bring about change and improvement in the developmental potential of these children. Chapter 1 presents general information on children affected…

Programming the Generalist Volunteer: A Survey of Suggestions and Achievements.

ERIC Educational Resources Information Center

Petrides, George

Peace Corps programing trends outlined in this manual indicate the need to balance the more personal and social aspects of volunteer service with purely technical job performance by developing the role of generalists, or AB liberal arts graduates. Topics covered in the manual are titled "A New Look at the Generalist,""A Look at the…

Terminology Manual.

ERIC Educational Resources Information Center

Felber, Helmut

A product of the International Information Center for Terminology (Infoterm), this manual is designed to serve as a reference tool for practitioners active in terminology work and documentation. The manual explores the basic ideas of the Vienna School of Terminology and explains developments in the area of applied computer aided terminography…

Patterns of technical error among surgical malpractice claims: an analysis of strategies to prevent injury to surgical patients.

PubMed

Regenbogen, Scott E; Greenberg, Caprice C; Studdert, David M; Lipsitz, Stuart R; Zinner, Michael J; Gawande, Atul A

2007-11-01

To identify the most prevalent patterns of technical errors in surgery, and evaluate commonly recommended interventions in light of these patterns. The majority of surgical adverse events involve technical errors, but little is known about the nature and causes of these events. We examined characteristics of technical errors and common contributing factors among closed surgical malpractice claims. Surgeon reviewers analyzed 444 randomly sampled surgical malpractice claims from four liability insurers. Among 258 claims in which injuries due to error were detected, 52% (n = 133) involved technical errors. These technical errors were further analyzed with a structured review instrument designed by qualitative content analysis. Forty-nine percent of the technical errors caused permanent disability; an additional 16% resulted in death. Two-thirds (65%) of the technical errors were linked to manual error, 9% to errors in judgment, and 26% to both manual and judgment error. A minority of technical errors involved advanced procedures requiring special training ("index operations"; 16%), surgeons inexperienced with the task (14%), or poorly supervised residents (9%). The majority involved experienced surgeons (73%), and occurred in routine, rather than index, operations (84%). Patient-related complexities-including emergencies, difficult or unexpected anatomy, and previous surgery-contributed to 61% of technical errors, and technology or systems failures contributed to 21%. Most technical errors occur in routine operations with experienced surgeons, under conditions of increased patient complexity or systems failure. Commonly recommended interventions, including restricting high-complexity operations to experienced surgeons, additional training for inexperienced surgeons, and stricter supervision of trainees, are likely to address only a minority of technical errors. Surgical safety research should instead focus on improving decision-making and performance in routine operations for complex patients and circumstances.

Pedestrian and bicycle facilities in California : a technical reference and technology transfer synthesis for Caltrans planners and engineers.

DOT National Transportation Integrated Search

2005-07-01

The primary purpose of Pedestrian and Bicycle Facilities in CaliforniaA : Technical Reference and Technology Transfer Synthesis for Caltrans Planners : and Engineers (Technical Reference) is to provide Caltrans staff : with a synthesis of in...

Self-Instructional Manual for Tumor Registrars: Book 3, Tumor Registrar Vocabulary - The Composition of Medical Terms.

ERIC Educational Resources Information Center

Shambaugh, Evelyn M., Ed.

Book 3 of the self-instructional manual for tumor registrars deals with tumor registrar vocabulary. It is designed to teach tumor registrars to recognize diagnostic terms versus treatment terms, terms that refer to anatomical sites, terms that refer to patient symptoms. The first three parts of the book are concerned with word roots, prefixes and…

Tutor Reference Manual. Second Edition.

ERIC Educational Resources Information Center

Clark, John T., Ed.; Williams, Ron, Jr., Ed.

This manual, intended for use by tutors working with adults learning to read, offers a consolidated resource of specific instructional techniques and provides additional suggestions not covered in basic tutoring workshops. The manual summarizes a variety of approaches commonly used to instruct adults and provides background for three modes of…

School District Energy Manual.

ERIC Educational Resources Information Center

Association of School Business Officials International, Reston, VA.

This manual serves as an energy conservation reference and management guide for school districts. The School District Energy Program (SDEP) is designed to provide information and/or assistance to school administrators planning to implement a comprehensive energy management program. The manual consists of 15 parts. Part 1 describes the SDEP; Parts…

Hematological reference values of healthy Malaysian population.

PubMed

Roshan, T M; Rosline, H; Ahmed, S A; Rapiaah, M; Wan Zaidah, A; Khattak, M N

2009-10-01

Health and disease can only be distinguished by accurate and reliable reference values of a particular laboratory test. It is now a proven fact that there is considerable variation in hematology reference intervals depending on the demographic and preanalytical variables. There are evidences that values provided by manufacturers do not have appropriate application for all populations. Moreover, reference ranges provided by different laboratory manuals and books also do not solve this problem. We are presenting here normal reference ranges of Malaysian population. These values were determined by using Sysmex XE-2100 and ACL 9000 hematology and coagulation analyzers. Results from this study showed that there were considerable differences in the reference values from manufacturers, western population or laboratory manuals compared with those from the local population.

Phantom Study Investigating the Accuracy of Manual and Automatic Image Fusion with the GE Logiq E9: Implications for use in Percutaneous Liver Interventions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burgmans, Mark Christiaan, E-mail: m.c.burgmans@lumc.nl; Harder, J. Michiel den, E-mail: chiel.den.harder@gmail.com; Meershoek, Philippa, E-mail: P.Meershoek@lumc.nl

PurposeTo determine the accuracy of automatic and manual co-registration methods for image fusion of three-dimensional computed tomography (CT) with real-time ultrasonography (US) for image-guided liver interventions.Materials and MethodsCT images of a skills phantom with liver lesions were acquired and co-registered to US using GE Logiq E9 navigation software. Manual co-registration was compared to automatic and semiautomatic co-registration using an active tracker. Also, manual point registration was compared to plane registration with and without an additional translation point. Finally, comparison was made between manual and automatic selection of reference points. In each experiment, accuracy of the co-registration method was determined bymore » measurement of the residual displacement in phantom lesions by two independent observers.ResultsMean displacements for a superficial and deep liver lesion were comparable after manual and semiautomatic co-registration: 2.4 and 2.0 mm versus 2.0 and 2.5 mm, respectively. Both methods were significantly better than automatic co-registration: 5.9 and 5.2 mm residual displacement (p < 0.001; p < 0.01). The accuracy of manual point registration was higher than that of plane registration, the latter being heavily dependent on accurate matching of axial CT and US images by the operator. Automatic reference point selection resulted in significantly lower registration accuracy compared to manual point selection despite lower root-mean-square deviation (RMSD) values.ConclusionThe accuracy of manual and semiautomatic co-registration is better than that of automatic co-registration. For manual co-registration using a plane, choosing the correct plane orientation is an essential first step in the registration process. Automatic reference point selection based on RMSD values is error-prone.« less

Technical/Reference Books--Potential Often Underestimated. Books of This Type Lend Themselves to What Can Be Described As Unique Styles of Merchandising

ERIC Educational Resources Information Center

Turk, John W.

1975-01-01

Technical/reference books must be sold by the college store for it to continue as an educational resource center. A professional retailing approach to technical/reference books will increase sales and contribute to profits. (Author/PG)

Healthy Young Children: A Manual for Programs.

ERIC Educational Resources Information Center

Kendrick, Abby Shapiro, Ed.; And Others

This manual, which was developed as a reference and resource guide for program directors and teachers of young children, describes high standards for health policies. Also provided are information based on current research and recommendations from experts in health and early childhood education. The manual contains 7 sections and 19 chapters.…

Laboratory Waste Disposal Manual. Revised Edition.

ERIC Educational Resources Information Center

Stephenson, F. G., Ed.

This manual is designed to provide laboratory personnel with information about chemical hazards and ways of disposing of chemical wastes with minimum contamination of the environment. The manual contains a reference chart section which has alphabetical listings of some 1200 chemical substances with information on the health, fire and reactivity…

National Center for Environmental Health

MedlinePlus

... Environmental Hazards and Health Effects Division of Laboratory Sciences Publications & Products Books/Booklets Healthy Housing Reference Manual Healthy Housing Inspection Manual Fact Sheets Training File Formats Help: How do I ...

Water and Sanitation Technologies: A Trainer's Manual. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-32.

ERIC Educational Resources Information Center

Hanson, Bradley D.

This guide, which includes an outline of 222 hours of technical training integrated with training in community organization techniques, is intended for trainers who prepare Peace Corps water and sanitation technicians and engineers for field service. The training program developed by the guide covers these subject areas: community development,…

General Safety Manual for Vocational-Technical Education and Industrial Arts Programs. Bulletin No. 1674.

ERIC Educational Resources Information Center

Dennis, Bill; Poston, David

This manual is designed to offer suggestions for teaching safety in Louisiana industrial arts and vocational education programs. The suggestions and information presented are intended for use in an ongoing safety program, not a short unit presented at the beginning of the school year. Following an introduction in unit 1, the material has been…

Observation and Coding Manual for the Longitudinal Study of Reading Comprehension and Science Concept Acquisition (Third Edition). Technical Report No. L-1.

ERIC Educational Resources Information Center

Meyer, Linda A.; And Others

This manual describes the model--specifically the observation procedures and coding systems--used in a longitudinal study of how children learn to comprehend what they read, with particular emphasis on science texts. Included are procedures for the following: identifying students; observing--recording observations and diagraming the room; writing…

'Buildings in Use' Study. Technical Factors.

ERIC Educational Resources Information Center

Wisconsin Univ., Milwaukee. School of Architecture and Urban Planning.

The second report of the 'Buildings in Use' study documents the results of over 100 field tests conducted at four elementary schools, as well as discussion of these results and relevant technical specifications and details. The procedural framework used in the Field Tests Manual is followed and test results are rated numerically wherever possible.…

The SI Metric System and Practical Applications.

ERIC Educational Resources Information Center

Carney, Richard W.

Intended for use in the technical program of a technical institute or community college, this student manual is designed to provide background in the metric system contributing to employability. Nine units are presented with objectives stated for each unit followed by questions or exercises. (Printed answers are supplied when necessary.) Unit 1…

Cooperative Education Guidelines for Technical Colleges and Other Associate Degree Programs.

ERIC Educational Resources Information Center

Streb, Thomas C.; Hammen, William C.

Guidelines for cooperative education in two-year technical colleges as well as for other associate degree programs are presented in this 15 chapter manual. Chapter 1 covers cooperative education history, current status, advantages and disadvantages, purposes, and information sources. Chapter 2 on personnel presents an overview and discusses the…

45 CFR 1182.15 - Institute responsibility for maintaining adequate technical, physical, and security safeguards to...

Code of Federal Regulations, 2010 CFR

2010-10-01

... record systems. These security safeguards shall apply to all systems in which identifiable personal data... data and automated systems shall be adequately trained in the security and privacy of personal data. (4... technical, physical, and security safeguards to prevent unauthorized disclosure or destruction of manual and...

45 CFR 1159.15 - Who has the responsibility for maintaining adequate technical, physical, and security safeguards...

Code of Federal Regulations, 2010 CFR

2010-10-01

... disclosure or destruction of manual and automatic record systems. These security safeguards shall apply to... use of records contained in a system of records are adequately trained to protect the security and... adequate technical, physical, and security safeguards to prevent unauthorized disclosure or destruction of...

Policies and Procedures Governing the Operation of Vocational-Technical Education in Nevada.

ERIC Educational Resources Information Center

Nevada State Dept. of Education, Carson City. Div. of Vocational-Technical and Adult Education.

This manual was prepared to assist local public schools in organizing and conducting a broadened program of vocational education of significant scope. Operating policies and procedures are provided in areas of: (1) Administration of Vocational-Technical Education, (2) Agricultural Education, (3) Vocational Business and Office Occupations, (4)…

77 FR 39800 - Nondiscrimination on the Basis of Disability in Air Travel: Draft Technical Assistance Manual

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-05

... specific learning disabilities. (Sec. 382.3). What is not considered a physical or mental impairment... Secretary 14 CFR Part 382 Nondiscrimination on the Basis of Disability in Air Travel: Draft Technical... [Docket No. DOT-OST-2012--0098] Nondiscrimination on the Basis of Disability in Air Travel: Draft...

Japanese Society for Laboratory Hematology flow cytometric reference method of determining the differential leukocyte count: external quality assurance using fresh blood samples.

PubMed

Kawai, Y; Nagai, Y; Ogawa, E; Kondo, H

2017-04-01

To provide target values for the manufacturers' survey of the Japanese Society for Laboratory Hematology (JSLH), accurate standard data from healthy volunteers were needed for the five-part differential leukocyte count. To obtain such data, JSLH required an antibody panel that achieved high specificity (particularly for mononuclear cells) using simple gating procedures. We developed a flow cytometric method for determining the differential leukocyte count (JSLH-Diff) and validated it by comparison with the flow cytometric differential leukocyte count of the International Council for Standardization in Haematology (ICSH-Diff) and the manual differential count obtained by microscopy (Manual-Diff). First, the reference laboratory performed an imprecision study of JSLH-Diff and ICSH-Diff, as well as performing comparison among JSLH-Diff, Manual-Diff, and ICSH-Diff. Then two reference laboratories and seven participating laboratories performed imprecision and accuracy studies of JSLH-Diff, Manual-Diff, and ICSH-Diff. Simultaneously, six manufacturers' laboratories provided their own representative values by using automated hematology analyzers. The precision of both JSLH-Diff and ICSH-Diff methods was adequate. Comparison by the reference laboratory showed that all correlation coefficients, slopes and intercepts obtained by the JSLH-Diff, ICSH-Diff, and Manual-Diff methods conformed to the criteria. When the imprecision and accuracy of JSLH-Diff were assessed at seven laboratories, the CV% for lymphocytes, neutrophils, monocytes, eosinophils, and basophils was 0.5~0.9%, 0.3~0.7%, 1.7~2.6%, 3.0~7.9%, and 3.8~10.4%, respectively. More than 99% of CD45 positive leukocytes were identified as normal leukocytes by JSLH-Diff. When JSLH-Diff method were validated by comparison with Manual-Diff and ICSH-Diff, JSLH-Diff showed good performance as a reference method. © 2016 John Wiley & Sons Ltd.

Special Operations Forces Reference Manual. Fourth Edition

DTIC Science & Technology

2015-06-01

Special Operations Forces Reference Manual Fourth Edition The JSOU Press MacDill AFB, Florida June 2015 Prepared by Joint Special Operations...other national and international security decision-makers, both military and civilian, through teaching, outreach, and research in the science and art...Luke First Edition, June 2005 (Revised July 2006) Second Edition, August 2008 Third Edition, September 2011 Fourth Edition, June 2015 This work was

Technical Aspects of Endobronchial Ultrasound-Guided Transbronchial Needle Aspiration: CHEST Guideline and Expert Panel Report.

PubMed

Wahidi, Momen M; Herth, Felix; Yasufuku, Kazuhiro; Shepherd, Ray Wesley; Yarmus, Lonny; Chawla, Mohit; Lamb, Carla; Casey, Kenneth R; Patel, Sheena; Silvestri, Gerard A; Feller-Kopman, David J

2016-03-01

Endobronchial ultrasound (EBUS) was introduced in the last decade, enabling real-time guidance of transbronchial needle aspiration (TBNA) of mediastinal and hilar structures and parabronchial lung masses. The many publications produced about EBUS-TBNA have led to a better understanding of the performance characteristics of this procedure. The goal of this document was to examine the current literature on the technical aspects of EBUS-TBNA as they relate to patient, technology, and proceduralist factors to provide evidence-based and expert guidance to clinicians. Rigorous methodology has been applied to provide a trustworthy evidence-based guideline and expert panel report. A group of approved panelists developed key clinical questions by using the PICO (population, intervention, comparator, and outcome) format that addressed specific topics on the technical aspects of EBUS-TBNA. MEDLINE (via PubMed) and the Cochrane Library were systematically searched for relevant literature, which was supplemented by manual searches. References were screened for inclusion, and well-recognized document evaluation tools were used to assess the quality of included studies, to extract meaningful data, and to grade the level of evidence to support each recommendation or suggestion. Our systematic review and critical analysis of the literature on 15 PICO questions related to the technical aspects of EBUS-TBNA resulted in 12 statements: 7 evidence-based graded recommendations and 5 ungraded consensus-based statements. Three questions did not have sufficient evidence to generate a statement. Evidence on the technical aspects of EBUS-TBNA varies in strength but is satisfactory in certain areas to guide clinicians on the best conditions to perform EBUS-guided tissue sampling. Additional research is needed to enhance our knowledge regarding the optimal performance of this effective procedure. Copyright © 2016 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

Transport systems research vehicle color display system operations manual

NASA Technical Reports Server (NTRS)

Easley, Wesley C.; Johnson, Larry E.

1989-01-01

A recent upgrade of the Transport Systems Research Vehicle operated by the Advanced Transport Operating Systems Program Office at the NASA Langley Research Center has resulted in an all-glass panel in the research flight deck. Eight ARINC-D size CRT color displays make up the panel. A major goal of the display upgrade effort was ease of operation and maintenance of the hardware while maintaining versatility needed for flight research. Software is the key to this required versatility and will be the area demanding the most detailed technical design expertise. This document is is intended to serve as a single source of quick reference information needed for routine operation and system level maintenance. Detailed maintenance and modification of the display system will require specific design documentation and must be accomplished by individuals with specialized knowledge and experience.

US and foreign alloy cross-reference database

NASA Technical Reports Server (NTRS)

Springer, John M.; Morgan, Steven H.

1991-01-01

Marshall Space Flight Center and other NASA installations have a continuing requirement for materials data from other countries involved with the development of joint international Spacelab experiments and other hardware. This need includes collecting data for common alloys to ascertain composition, physical properties, specifications, and designations. This data is scattered throughout a large number of specification statements, standards, handbooks, and other technical literature which make a manual search both tedious and often limited in extent. In recognition of this problem, a computerized database of information on alloys was developed along with the software necessary to provide the desired functions to access this data. The intention was to produce an initial database covering aluminum alloys, along with the program to provide a user-interface to the data, and then later to extend and refine the database to include other nonferrous and ferrous alloys.

NASCAP programmer's reference manual

NASA Astrophysics Data System (ADS)

Mandell, M. J.; Stannard, P. R.; Katz, I.

1993-05-01

The NASA Charging Analyzer Program (NASCAP) is a computer program designed to model the electrostatic charging of complicated three-dimensional objects, both in a test tank and at geosynchronous altitudes. This document is a programmer's reference manual and user's guide. It is designed as a reference to experienced users of the code, as well as an introduction to its use for beginners. All of the many capabilities of NASCAP are covered in detail, together with examples of their use. These include the definition of objects, plasma environments, potential calculations, particle emission and detection simulations, and charging analysis.

NASCAP programmer's reference manual

NASA Technical Reports Server (NTRS)

Mandell, M. J.; Stannard, P. R.; Katz, I.

1993-01-01

The NASA Charging Analyzer Program (NASCAP) is a computer program designed to model the electrostatic charging of complicated three-dimensional objects, both in a test tank and at geosynchronous altitudes. This document is a programmer's reference manual and user's guide. It is designed as a reference to experienced users of the code, as well as an introduction to its use for beginners. All of the many capabilities of NASCAP are covered in detail, together with examples of their use. These include the definition of objects, plasma environments, potential calculations, particle emission and detection simulations, and charging analysis.

Instruct coders' manual

NASA Technical Reports Server (NTRS)

Friend, J.

1971-01-01

A manual designed both as an instructional manual for beginning coders and as a reference manual for the coding language INSTRUCT, is presented. The manual includes the major programs necessary to implement the teaching system and lists the limitation of current implementation. A detailed description is given of how to code a lesson, what buttons to push, and what utility programs to use. Suggestions for debugging coded lessons and the error messages that may be received during assembly or while running the lesson are given.

Automated cerebral infarct volume measurement in follow-up noncontrast CT scans of patients with acute ischemic stroke.

PubMed

Boers, A M; Marquering, H A; Jochem, J J; Besselink, N J; Berkhemer, O A; van der Lugt, A; Beenen, L F; Majoie, C B

2013-08-01

Cerebral infarct volume as observed in follow-up CT is an important radiologic outcome measure of the effectiveness of treatment of patients with acute ischemic stroke. However, manual measurement of CIV is time-consuming and operator-dependent. The purpose of this study was to develop and evaluate a robust automated measurement of the CIV. The CIV in early follow-up CT images of 34 consecutive patients with acute ischemic stroke was segmented with an automated intensity-based region-growing algorithm, which includes partial volume effect correction near the skull, midline determination, and ventricle and hemorrhage exclusion. Two observers manually delineated the CIV. Interobserver variability of the manual assessments and the accuracy of the automated method were evaluated by using the Pearson correlation, Bland-Altman analysis, and Dice coefficients. The accuracy was defined as the correlation with the manual assessment as a reference standard. The Pearson correlation for the automated method compared with the reference standard was similar to the manual correlation (R = 0.98). The accuracy of the automated method was excellent with a mean difference of 0.5 mL with limits of agreement of -38.0-39.1 mL, which were more consistent than the interobserver variability of the 2 observers (-40.9-44.1 mL). However, the Dice coefficients were higher for the manual delineation. The automated method showed a strong correlation and accuracy with the manual reference measurement. This approach has the potential to become the standard in assessing the infarct volume as a secondary outcome measure for evaluating the effectiveness of treatment.

References & Resources for Secretaries and Clerical Personnel, 1980. Manual 4200-1.

ERIC Educational Resources Information Center

Van Gelder, Naneene, Ed.

Developed as a resource guide for all secretaries and clerical personnel employed in the San Diego Community College District (SDCCD), this manual provides information on matters ranging from district procedures and office operations to English usage and professional growth. The manual's 21 chapters cover: (1) district history, philosophy, and…

Police Allocation Manual User's Guide: Determination of the Number and Allocation of Personnel for Patrol Services for State Police Departments (Special Version - April 1993)

DOT National Transportation Integrated Search

1993-04-01

The Police Allocation Manual User's Guide (herein after referred to as the Guide) : is intended as a companion document to the Police Allocation Manual (PAM), : Special Version, which can be used to determine the number and allocation of : personnel ...

Establishing the LINC (Learning Individualized for Canadians) Program: A Manual for Administrators and Instructors.

ERIC Educational Resources Information Center

Tippett, Glen; Mullen, Vernon

A manual to accompany LINC courses in communications and mathematics, containing information on background, objectives, components, individualized process, and procedures for curriculum development and implementation of LINC Program, is presented. It was formerly referred to as The LINC Program User's Manual. An appendix includes a Reading List…

Wisconsin Library Trustee Reference Manual.

ERIC Educational Resources Information Center

Opinion Research Corp., Princeton, NJ.

This newly updated and revised expansion of the Wisconsin Library Trustee's Manual serves as a comprehensive resource and how-to guide for board members of public libraries that range in size and scope from small to large communities in both urban and rural areas. The manual includes basic information to which every Wisconsin library trustee…

Waste Water Plant Operators Manual.

ERIC Educational Resources Information Center

Washington State Coordinating Council for Occupational Education, Olympia.

This manual for sewage treatment plant operators was prepared by a committee of operators, educators, and engineers for use as a reference text and handbook and to serve as a training manual for short course and certification programs. Sewage treatment plant operators have a responsibility in water quality control; they are the principal actors in…

Outsourcing Library Technical Services. A How-To-Do-It Manual for Librarians. How-To-Do-It Manuals for Librarians, Number 69.

ERIC Educational Resources Information Center

Hirshon, Arnold; Winters, Barbara

In the effort to reduce costs, improve productivity, enhance quality of services, and improve turnaround time for ordering, receiving, and cataloging new materials, libraries are increasingly turning to outsourcing as a strategic management tool to help them maximize use of their fiscal and human resources. This guide covers all aspects of…

Teamwork in Task Analysis. Training Manual V. Evaluation of the Marine Corps Task Analysis Program. Technical Report No. 9.

ERIC Educational Resources Information Center

Kuriloff, Arthur H.; Yoder, Dale

This training manual provides guidelines for effective teamwork and work-team maintenance and development. It was designed for use in the Marine Corps Task Analysis program, in which staff members are organized to form a work-team whose continuing performance as an effective team is crucial for success of the project. Chapter 1, the major portion…

SELECTIVE DISSEMINATION OF INFORMATION (SDI). VOLUME II, IMPLEMENTATION MANUAL. FINAL REPORT. ARMY TECHNICAL LIBRARY IMPROVEMENT STUDIES (ATLIS), REPORT NO. 16.

ERIC Educational Resources Information Center

BIVONA, WILLIAM A.

A SET OF GUIDELINES FOR IMPLEMENTING AND OPERATING A REPLICA OF A PROTOTYPE SELECTIVE DISSEMINATION OF INFORMATION (SDI) SYSTEM TESTED AT U.S. ARMY NATICK LABORATORIES, AND REPORTED IN LI 000 273, IS GIVEN IN THIS MANUAL. INFORMATION IS SUPPLIED WHICH IS USEFUL IN THE INITIAL STAGES OF IMPLEMENTATION. THE APPLICATION OF SPECIFIC CRITERIA FOR…

Word Lists to Simplify Vocabulary of Technical Information. Final Report.

ERIC Educational Resources Information Center

Kincaid, J. Peter; And Others

This report describes eight word lists developed for use as part of the computer readability editing system (CRES), which was developed to serve as an author's aid in improving the ease of comprehending Navy technical manuals and training materials. The system has features which flag uncommon and misspelled words and long sentences, suggest simple…

The Culture of Futility and Its Impact on Study Culture in Technical/Vocational Schools in Belgium

ERIC Educational Resources Information Center

Van Houtte, Mieke; Stevens, Peter A. J.

2010-01-01

Starting from the present knowledge society with its social overvaluing of cognition and white-collar jobs at the expense of manual labour, this article examines whether school type--academic versus technical/vocational schools--relates to students' sense of futility. It assesses the schools' culture of futility and investigates the explanatory…

Fiscal Year 1986 Technical Objective Document (TOD).

DTIC Science & Technology

1986-03-01

abilties superior to other IR and manual turrets. - START DATE: FY 88 END DATE: FY 90" PROJECT TITLE: COMPOSITE METAL FIRES EE 62:06 JON: 2673XXXX...TECHNOLOGY: FIRE ELEMENT: INTERACTION DESCRIPTION (TECHNICAL OBJECTIVE) Evaluate a new series of agents "BORALONS" capable of extinguishing metal fires and...PROJECT TITLE: COMPOSITE METAL FIRES PE: 63723 JON: 2104XXXX

Das Sprachlabor in der Schule (The Language Laboratory in Schools).

ERIC Educational Resources Information Center

Cabus, Hans-Joachim; Freudenstein, Reinhold

This technical manual for the use of language laboratories includes information on the following topics: (1) types of laboratories, (2) the tape, (3) the tape recorder, (4) other basic technical equipment, (5) the audio-active laboratory, the audio-active-compare laboratory, and an evaluation of the two, (6) possibilities for expanded use, (7)…

A Data Audit and Analysis Toolkit To Support Assessment of the First College Year.

ERIC Educational Resources Information Center

Paulson, Karen

This "toolkit" provides a process by which institutions can identify and use information resources to enhance the experiences and outcomes of first-year students. The toolkit contains a "Technical Manual" designed for use by the technical personnel who will be conducting the data audit and associated analyses. Administrators who want more…

Reference Service Policy Statement.

ERIC Educational Resources Information Center

Young, William F.

This reference service policy manual provides general guidelines to encourage reference service of the highest possible quality and to insure uniform practice. The policy refers only to reference service in the University Libraries and is intended for use in conjunction with other policies and procedures issued by the Reference Services Division.…

THERM 5 / WINDOW 5 NFRC simulation manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mitchell, Robin; Kohler, Christian; Arasteh, Dariush

This document, the ''THERM 5/WINDOW 5 NFRC Simulation Manual', discusses how to use the THERM and WINDOW programs to model products for NFRC certified simulations and assumes that the user is already familiar with those programs. In order to learn how to use these programs, it is necessary to become familiar with the material in both the ''THERM User's Manual'' and the ''WINDOW User's Manual''. In general, this manual references the User's Manuals rather than repeating the information. If there is a conflict between either of the User Manual and this ''THERM 5/''WINDOW 5 NFRC Simulation Manual'', the ''THERM 5/WINDOWmore » 5 NFRC Simulation Manual'' takes precedence. In addition, if this manual is in conflict with any NFRC standards, the standards take precedence. For example, if samples in this manual do not follow the current taping and testing NFRC standards, the standards not the samples in this manual, take precedence.« less

76 FR 37244 - Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-120, -120ER...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-27

... To Refer to Latest Revision of the Aircraft Maintenance Manual (AMM) Great Lakes stated that the...--Description and Operation, of Chapter 28, Fuel, the EMBRAER EMB120 Brasilia Aircraft Maintenance Manual, MM... Operation, of Chapter 28, Fuel, of the EMBRAER EMB120 Brasilia Aircraft Maintenance Manual, Revision 24...

Healthy Young Children: A Manual for Programs, 4th Edition.

ERIC Educational Resources Information Center

Aronson, Susan S., Ed.

Noting that the health component of child care should be planned to respond to the developmental patterns of young children, this manual was developed as a reference and resource guide for program directors and teachers of young children and can be used as a textbook for adult learners. The manual, based on national standards and reviewed by…

Promoting Wellness: A Nutrition, Health and Safety Manual for Family Child Care Providers.

ERIC Educational Resources Information Center

Tatum, Pam S.

This manual provides a reference source for use by sponsor organizations of the Child and Adult Care Food Program (CACFP) in training family child care providers. The manual begins with separate introductory sections for trainers and for providers. The trainer's section includes materials on: how adults learn, strengths and limitations of various…

Developing hospital identity manuals: a reference tool for illustrators.

PubMed

Schaffer, J A; Zimmerman, S B

1990-01-01

Because of an increase in hospital marketing efforts, medical illustrators may be asked to assist in developing and implementing hospital identity manuals, which specify the graphic standards for visual communications media. A checklist survey of existing identity manuals and a literature review were conducted by one of the authors, a medical illustrator, to help her to develop a manual for her hospital employer. This article documents the literature review, the study, and the identity manual development, and presents recommendations to help other medical illustrators who might become involved in similar assignments.

ASEAN GMP and pharmaceutical industries in Indonesia.

PubMed

Soesilo, S; Sitorus, U

1995-01-01

Indonesia was appointed by the ASEAN Technical Cooperation in Pharmaceutical as a focal point and to coordinate the development of practical guidelines for the implementation of GMP. The ASEAN GMP Guidelines were endorsed by the ASEAN Technical Cooperation in Pharmaceutical in 1988, which among others required separation of Beta-Lactam dedicated facilities and three degrees of cleanliness for production areas. As it was realised that drug manufacturers in developing countries need more detailed guidelines to be able to implement the GMP, an Operational Manual for GMP was also prepared for providing examples of SOPs lay-outs, documentation etc. It was agreed by the technical cooperation group to leave the implementation of GMP to each member country. However, the ASEAN Manual for Inspection of GMP was drafted and endorsed by the group and training of ASEAN Drug Inspectors was organized to support the implementation. The ASEAN GMP is being implemented in Indonesia through a five-year, stepwise implementation plan, starting in 1989.

Defense Acquisition Research Journal. Volume 18, Number 2, Issue 58, April 2011

DTIC Science & Technology

2011-04-01

submit your manuscript with references in APA format (author- date-page number form of citation) as outlined in the Publication Manual of the American...Psychological Association ( 6th Edition ). For all other style questions, please refer to the Chicago Manual of Style (15th Edition ). Contributors are...Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the collection of information is estimated to average 1 hour

Defense Acquisition Research Journal. Volume 20, Number 1, Issue 65, April 2013

DTIC Science & Technology

2013-04-01

citation) as outlined in the Publication Manual of the American Psychological Association ( 6th Edition ). For all other style questions, please refer to...the Chicago Manual of Style (15th Edition ). Contributors are encouraged to seek the advice of a reference librarian in completing citation of...AUSTERITY Presented on behalf of DAU by: DAU Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the collection of

Defense Acquisition Research Journal. Volume 19, Number 4, Issue 64, October 2012

DTIC Science & Technology

2012-10-01

citation) as outlined in the Publication Manual of the American Psycho- logical Association ( 6th Edition ). For all other style questions, please refer...Graphic Designer Lisa Drobek Editing , Design, and Layout Schatz Publishing Group A Publication of the Defense Acquisition University October 2012 Vol...to the Chicago Manual of Style (15th Edition ). Contributors are encouraged to seek the advice of a reference librarian in completing citation of

Defense Acquisition Research Journal. Volume 19, Number 3, Issue 63, July 2012

DTIC Science & Technology

2012-07-01

submit your manuscript with references in APA format (author-date-page number form of citation) as outlined in the Publication Manual of the American...Psycho- logical Association ( 6th Edition ). For all other style questions, please refer to the Chicago Manual of Style (15th Edition ). Contributors are... Publications Assistants/ Graphic Designers Janet Amedome Lisa Drobek Multimedia Assistant Noelia Perez Editing , Design, and Layout Schatz Publishing Group The

Defense AR Journal. Volume 18, Number 1, Issue 57

DTIC Science & Technology

2011-01-01

Manual of the American Psychological Association ( 6th Edition ). For all other style questions, please refer to the Chicago Manual of Style (15th Edition ...112 Format Please submit your manuscript with references in APA format (author- date-page number form of citation) as outlined in the Publication ...Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the collection of information is estimated to average 1 hour

Defense AR Journal. Issue 56, Volume 17, Number 4. Measuring Programs and Progress

DTIC Science & Technology

2010-10-01

5 2 3 styLe We will require you to submit your final draft of the manuscript, especially citations (endnotes instead of footnotes), in the format...specified in two specific style manuals. The ARJ follows the author (date) form of citation . We expect you to use the Publication Manual of the...reference librarian in completing citation of government documents because standard formulas of citations may provide incomplete information in reference

Reference-free ground truth metric for metal artifact evaluation in CT images.

PubMed

Kratz, Bärbel; Ens, Svitlana; Müller, Jan; Buzug, Thorsten M

2011-07-01

In computed tomography (CT), metal objects in the region of interest introduce data inconsistencies during acquisition. Reconstructing these data results in an image with star shaped artifacts induced by the metal inconsistencies. To enhance image quality, the influence of the metal objects can be reduced by different metal artifact reduction (MAR) strategies. For an adequate evaluation of new MAR approaches a ground truth reference data set is needed. In technical evaluations, where phantoms can be measured with and without metal inserts, ground truth data can easily be obtained by a second reference data acquisition. Obviously, this is not possible for clinical data. Here, an alternative evaluation method is presented without the need of an additionally acquired reference data set. The proposed metric is based on an inherent ground truth for metal artifacts as well as MAR methods comparison, where no reference information in terms of a second acquisition is needed. The method is based on the forward projection of a reconstructed image, which is compared to the actually measured projection data. The new evaluation technique is performed on phantom and on clinical CT data with and without MAR. The metric results are then compared with methods using a reference data set as well as an expert-based classification. It is shown that the new approach is an adequate quantification technique for artifact strength in reconstructed metal or MAR CT images. The presented method works solely on the original projection data itself, which yields some advantages compared to distance measures in image domain using two data sets. Beside this, no parameters have to be manually chosen. The new metric is a useful evaluation alternative when no reference data are available.

Federal lands highway project development and design manual

DOT National Transportation Integrated Search

2002-11-01

This manual has been developed to provide information and guidance to engineering staffs involved with project development and design of highways. It identifies those standards, specifications, guides, and references approved for use in carrying out ...

Genetics Home Reference: progressive familial intrahepatic cholestasis

MedlinePlus

... the vein that supplies blood to the liver (portal hypertension), and an enlarged liver and spleen (hepatosplenomegaly). There ... Manual Consumer Version: Cholestasis Merck Manual Consumer Version: Portal Hypertension Orphanet: Progressive familial intrahepatic cholestasis Patient Support and ...

ERIC Processing Manual. Rules and Guidelines for the Acquisition, Selection, and Technical Processing of Documents and Journal Articles by the Various Components of the ERIC Network.

ERIC Educational Resources Information Center

Brandhorst, Ted, Ed.; And Others

This loose-leaf manual provides the detailed rules, guidelines, and examples to be used by the components of the Educational Resources Information Center (ERIC) Network in acquiring and selecting documents and in processing them (i.e., cataloging, indexing, abstracting) for input to the ERIC computer system and subsequent announcement in…

Carpentry: Apprentice Related Training. Instructor's Manual. First, Second, Third, Fourth Years of a Four-Year Series in Four Volumes.

ERIC Educational Resources Information Center

Washington State Coordinating Council for Occupational Education, Olympia.

The course of related study in the carpentry trade is designed to meet the need for organized study in the various technical aspects necessary for an apprentice to become a well-trained journeyman. Divided into four one-year programs, the instructor's manual for the first year presents lessons on familiarizing the student with the trade and its…

Development of iPad application "Postima" for quantitative analysis of the effects of manual therapy

NASA Astrophysics Data System (ADS)

Sugiyama, Naruhisa; Shirakawa, Tomohiro

2017-07-01

The technical difficulty of diagnosing joint misalignment and/or dysfunction by quantitative evaluation is commonly acknowledged among manual therapists. Usually, manual therapists make a diagnosis based on a combination of observing patient symptoms and performing physical examinations, both of which rely on subjective criteria and thus contain some uncertainty. We thus sought to investigate the correlations among posture, skeletal misalignment, and pain severity over the course of manual therapy treatment, and to explore the possibility of establishing objective criteria for diagnosis. For this purpose, we developed an iPad application that realizes the measurement of patients' postures and analyzes them quantitatively. We also discuss the results and effectiveness of the measurement and analysis.

Writing the Trenches: What Students of Technical Writing and Literature Can Learn Together

ERIC Educational Resources Information Center

Baake, Ken; Shelton, Jen

2017-01-01

We argue for a course in which students analyze writing about a common topic--in this case World War I--from multiple genres (e.g., poetry and technical manuals). We address the divide between instruction in pragmatic and literary writing and calls to bridge that gap. Students working in disparate areas of English learn the strengths and the…

El Lexico Tecnico Espanol E Ingles: Linguistica y Humanismo (Spanish/English Lexicon: Linguistics and Humanism).

ERIC Educational Resources Information Center

Vivanco, Veronica

This manual, written in Spanish, contains a linguistic study to show that all sciences, whether economic or social, technical or humanistic in nature have a direct impact on our terminology. Starting with general linguistic considerations on technical terms in both English and Spanish, the study advances to semantics used in symbolic language. It…

Applied Reading Test--Forms A and B, Interim Manual, and Answer Sheets.

ERIC Educational Resources Information Center

Australian Council for Educational Research, Hawthorn.

Designed for use in the selection of apprentices, trainees, technical and trade personnel, and any other persons who need to read and understand text of a technical nature, this Applied Reading Test specimen set contains six passages and 32 items, has a 30-minute time limit, and is presented in a reusable multiple choice test booklet. The specimen…

Procedures For Microbial-Ecology Laboratory

NASA Technical Reports Server (NTRS)

Huff, Timothy L.

1993-01-01

Microbial Ecology Laboratory Procedures Manual provides concise and well-defined instructions on routine technical procedures to be followed in microbiological laboratory to ensure safety, analytical control, and validity of results.

What Have we Learned about Intelligent Transportation Systems?

DOT National Transportation Integrated Search

1980-01-01

The Traffic Planning manual is a reference of basic traffic enginnering techniques and their potential for improving traffic flow and traffic safety of urban arterial streets and highways. The manual identifies the traffic engineering measure appropr...

Operating guidelines for TxDOT ramp control signals.

DOT National Transportation Integrated Search

2009-01-01

The Texas Department of Transportation (TxDOT) currently maintains a Traffic Signals Manual. : Originally published in 1999, this manual provides a guide and reference for handling requests : for traffic signals on the designated State Highway System...

Validating automated kidney stone volumetry in computed tomography and mathematical correlation with estimated stone volume based on diameter.

PubMed

Wilhelm, Konrad; Miernik, Arkadiusz; Hein, Simon; Schlager, Daniel; Adams, Fabian; Benndorf, Matthias; Fritz, Benjamin; Langer, Mathias; Hesse, Albrecht; Schoenthaler, Martin; Neubauer, Jakob

2018-06-02

To validate AutoMated UroLithiasis Evaluation Tool (AMULET) software for kidney stone volumetry and compare its performance to standard clinical practice. Maximum diameter and volume of 96 urinary stones were measured as reference standard by three independent urologists. The same stones were positioned in an anthropomorphic phantom and CT scans acquired in standard settings. Three independent radiologists blinded to the reference values took manual measurements of the maximum diameter and automatic measurements of maximum diameter and volume. An "expected volume" was calculated based on manual diameter measurements using the formula: V=4/3 πr³. 96 stones were analyzed in the study. We had initially aimed to assess 100. Nine were replaced during data acquisition due of crumbling and 4 had to be excluded because the automated measurement did not work. Mean reference maximum diameter was 13.3 mm (5.2-32.1 mm). Correlation coefficients among all measured outcomes were compared. The correlation between the manual and automatic diameter measurements to the reference was 0.98 and 0.91, respectively (p<0.001). Mean reference volume was 1200 mm³ (10-9000 mm³). The correlation between the "expected volume" and automatically measured volume to the reference was 0.95 and 0.99, respectively (p<0.001). Patients' kidney stone burden is usually assessed according to maximum diameter. However, as most stones are not spherical, this entails a potential bias. Automated stone volumetry is possible and significantly more accurate than diameter-based volumetric calculations. To avoid bias in clinical trials, size should be measured as volume. However, automated diameter measurements are not as accurate as manual measurements.

The Container Tree Nursery Manual: Volume 7, Seedling processing, storage, and outplanting

Treesearch

Thomas D. Landis; R. Kasten Dumroese; Diane L. Haase

2010-01-01

This manual is based on the best current knowledge of container nursery management and should be used as a general reference. Recommendations were made using the best information available at the time and are, therefore, subject to revision as more knowledge becomes available. Much of the information in this manual was primarily developed from information on growing...

40 CFR 53.2 - General requirements for a reference method determination.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Manual methods—(1) Sulfur dioxide (SO 2 ) and lead. For measuring SO2 and lead, appendices A and G of part 50 of this chapter specify unique manual FRM for measuring these pollutants. Except as provided in § 53.16, other manual methods for SO2 and lead will not be considered for FRM determinations under this...

Users' Manual for Research: Translating Head Start Findings Into Action (Expanded Notebook Version).

ERIC Educational Resources Information Center

Grotberg, Edith H.; Fowler, Austine

This users' manual, intended for use with a Project Head Start teacher training notebook, describes the purpose, development and field testing of the training materials and suggests procedures for using the notebook as a resource in teacher training sessions. The training notebook to which the users' manual refers is based on 11 questions in the…

A Manual of Instruction for Log Scaling and the Measurement of Timber Products.

ERIC Educational Resources Information Center

Idaho State Board of Vocational Education, Boise. Div. of Trade and Industrial Education.

This manual was developed by a state advisory committee in Idaho to improve and standardize log scaling and provide a reference in training men for the job of log scaling in timber measurement. The content includes: (1) an introduction containing the scope of the manual, a definition and history of scaling, the reasons for scaling, and the…

E-KIT: An Electronic-Knowledge Information Tool for Organizing Site Information and Improving Technical Communication with Stakeholders - 13082

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kautsky, Mark; Findlay, Richard C.; Hodges, Rex A.

2013-07-01

Managing technical references for projects that have long histories is hampered by the large collection of documents, each of which might contain discrete pieces of information relevant to the site conceptual model. A database application has been designed to improve the efficiency of retrieving technical information for a project. Although many databases are currently used for accessing analytical and geo-referenced data, applications designed specifically to manage technical reference material for projects are scarce. Retrieving site data from the array of available references becomes an increasingly inefficient use of labor. The electronic-Knowledge Information Tool (e-KIT) is designed as a project-level resourcemore » to access and communicate technical information. The e-KIT is a living tool that grows as new information becomes available, and its value to the project increases as the volume of site information increases. Having all references assembled in one location with complete reference citations and links to elements of the site conceptual model offers a way to enhance communication with outside groups. The published and unpublished references are incorporated into the e-KIT, while the compendium of references serves as a complete bibliography for the project. (authors)« less

Teaching Astronomy in Extracurricular Study Groups of Armenia

NASA Astrophysics Data System (ADS)

Khachatryan, Mher; Grigoryan, Avetik

2016-12-01

The report presents the history of activity of Extracurricular Study Groups of Ar¬menia teaching astronomy and related subjects. It mainly refers to the Aerospace Club founded in 1988, which has long been acting as an officially unre¬gis¬tered, but efficiently performing non-governmental organization - Armenian Youth Ae¬ro¬space Society. The Club teaches, provides a truly scientific view of the world, advocates astronomy and other scientific and technical areas, provides interesting lectures and ar¬ticles to schools and mass media, arranges seminars and meetings with renowned experts, publishes scientific ar¬ticles, manuals, books, puts forward important scientific and techno-logical problems and offer students to work together on them, seek for solutions and develop possible appli¬ca¬tions. All this is aimed at maintaining and further development of leading positions of Armenia's scientific potential, particularly in astronomy.

Defense Acquisition Research Journal. Volume 19, Number 1, Issue 61, January 2012

DTIC Science & Technology

2012-01-01

format (author-date-page number form of citation) as outlined in the Publication Manual of the American Psycho- logical Association ( 6th Edition ). For all...other style questions, please refer to the Chicago Manual of Style (15th Edition ). Contributors are encouraged to seek the advice of a reference...theme editions . Please consult the DAU home page for current themes being solicited. See print schedule below. 2012 Due Date Publication Date July 1

Reference manual for a Requirements Specification Language (RSL), version 2.0

NASA Technical Reports Server (NTRS)

Fisher, Gene L.; Cohen, Gerald C.

1993-01-01

This report is a Reference Manual for a general-purpose Requirements Specification Language, RSL. The purpose of RSL is to specify precisely the external structure of a mechanized system and to define requirements that the system must meet. A system can be comprised of a mixture of hardware, software, and human processing elements. RSL is a hybrid of features found in several popular requirements specification languages and includes constructs for formal mathematical specification.

NASIS data base management system - IBM 360/370 OS MVT implementation. 5: Retrieval command system reference manual

NASA Technical Reports Server (NTRS)

1973-01-01

The retrieval command subsystem reference manual for the NASA Aerospace Safety Information System (NASIS) is presented. The output oriented classification of retrieval commands provides the user with the ability to review a set of data items for verification or inspection as a typewriter or CRT terminal and to print a set of data on a remote printer. Predefined and user-definable data formatting are available for both output media.

The preliminary SOL (Sizing and Optimization Language) reference manual

NASA Technical Reports Server (NTRS)

Lucas, Stephen H.; Scotti, Stephen J.

1989-01-01

The Sizing and Optimization Language, SOL, a high-level special-purpose computer language has been developed to expedite application of numerical optimization to design problems and to make the process less error-prone. This document is a reference manual for those wishing to write SOL programs. SOL is presently available for DEC VAX/VMS systems. A SOL package is available which includes the SOL compiler and runtime library routines. An overview of SOL appears in NASA TM 100565.

Evaluation of Semiautomated IS6110-Based Restriction Fragment Length Polymorphism Typing for Mycobacterium tuberculosis in a High-Burden Setting.

PubMed

Said, Halima M; Krishnamani, Keshav; Omar, Shaheed V; Dreyer, Andries W; Sansom, Bianca; Fallows, Dorothy; Ismail, Nazir A

2016-10-01

The manual IS6110-based restriction fragment length polymorphism (RFLP) typing method is highly discriminatory; however, it is laborious and technically demanding, and data exchange remains a challenge. In an effort to improve IS6110-based RFLP to make it a faster format, DuPont Molecular Diagnostics recently introduced the IS6110-PvuII kit for semiautomated typing of Mycobacterium tuberculosis using the RiboPrinter microbial characterization system. This study aimed to evaluate the semiautomated RFLP typing against the standard manual method. A total of 112 isolates collected between 2013 and 2014 were included. All isolates were genotyped using manual and semiautomated RFLP typing methods. Clustering rates and discriminatory indexes were compared between methods. The overall performance of semiautomated RFLP compared to manual typing was excellent, with high discriminatory index (0.990 versus 0.995, respectively) and similar numbers of unique profiles (72 versus 74, respectively), numbers of clustered isolates (33 versus 31, respectively), cluster sizes (2 to 6 and 2 to 5 isolates, respectively), and clustering rates (21.9% and 17.1%, respectively). The semiautomated RFLP system is technically simple and significantly faster than the manual RFLP method (8 h versus 5 days). The analysis is fully automated and generates easily manageable databases of standardized fingerprints that can be easily exchanged between laboratories. Based on its high-throughput processing with minimal human effort, the semiautomated RFLP can be a very useful tool as a first-line method for routine typing of M. tuberculosis isolates, especially where Beijing strains are highly prevalent, followed by manual RFLP typing if resolution is not achieved, thereby saving time and labor. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

Partial Red Blood Cell Exchange in Children and Young Patients with Sickle Cell Disease: Manual Versus Automated Procedure.

PubMed

Escobar, Carlos; Moniz, Marta; Nunes, Pedro; Abadesso, Clara; Ferreira, Teresa; Barra, António; Lichtner, Anabela; Loureiro, Helena; Dias, Alexandra; Almeida, Helena

2017-10-31

The benefits of manual versus automated red blood cell exchange have rarely been documented and studies in young sickle cell disease patients are scarce. We aim to describe and compare our experience in these two procedures. Young patients (≤ 21 years old) who underwent manual- or automated-red blood cell exchange for prevention or treatment of sickle cell disease complications were included. Clinical, technical and hematological data were prospectively recorded and analyzed. Ninety-four red blood cell exchange sessions were performed over a period of 68 months, including 57 manual and 37 automated, 63 for chronic complications prevention, 30 for acute complications and one in the pre-operative setting. Mean decrease in sickle hemoglobin levels was higher in automated-red blood cell exchange (p < 0.001) and permitted a higher sickle hemoglobin level decrease per volume removed (p < 0.001), while hemoglobin and hematocrit remained stable. Ferritin levels on chronic patients decreased 54%. Most frequent concern was catheter outflow obstruction on manual-red blood cell exchange and access alarm on automated-red blood cell exchange. No major complication or alloimunization was recorded. Automated-red blood cell exchange decreased sickle hemoglobin levels more efficiently than manual procedure in the setting of acute and chronic complications of sickle cell disease, with minor technical concerns mainly due to vascular access. The threshold of sickle hemoglobin should be individualized for clinical and hematological goals. In our cohort of young patients, the need for an acceptable venous access was a limiting factor, but iron-overload was avoided. Automated red blood cell exchange is safe and well tolerated. It permits a higher sickle hemoglobin removal efficacy, better volume status control and iron-overload avoidance.

29 CFR 1952.246 - Changes to approved plans.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., 1985. (2) The State submitted an industrial hygiene technical manual patterned after and responsive to... personal sampling, ex parte warrants, petition to modify abatement dates, withdrawal of contest...

PCDAS Version 2. 2: Remote network control and data acquisition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fishbaugher, M.J.

1987-09-01

This manual is intended for both technical and non-technical people who want to use the PCDAS remote network control and data acquisition software. If you are unfamiliar with remote data collection hardware systems designed at Pacific Northwest Laboratory (PNL), this introduction should answer your basic questions. Even if you have some experience with the PNL-designed Field Data Acquisition Systems (FDAS), it would be wise to review this material before attempting to set up a network. This manual was written based on the assumption that you have a rudimentary understanding of personal computer (PC) operations using Disk Operating System (DOS) versionmore » 2.0 or greater (IBM 1984). You should know how to create subdirectories and get around the subdirectory tree.« less

A trajectory generation and system characterization model for cislunar low-thrust spacecraft. Volume 2: Technical manual

NASA Technical Reports Server (NTRS)

Korsmeyer, David J.; Pinon, Elfego, III; Oconnor, Brendan M.; Bilby, Curt R.

1990-01-01

The documentation of the Trajectory Generation and System Characterization Model for the Cislunar Low-Thrust Spacecraft is presented in Technical and User's Manuals. The system characteristics and trajectories of low thrust nuclear electric propulsion spacecraft can be generated through the use of multiple system technology models coupled with a high fidelity trajectory generation routine. The Earth to Moon trajectories utilize near Earth orbital plane alignment, midcourse control dependent upon the spacecraft's Jacobian constant, and capture to target orbit utilizing velocity matching algorithms. The trajectory generation is performed in a perturbed two-body equinoctial formulation and the restricted three-body formulation. A single control is determined by the user for the interactive midcourse portion of the trajectory. The full spacecraft system characteristics and trajectory are provided as output.

Technical manual for manufacturing autologous fibrin tissue adhesive.

PubMed

Park, J J; Cintron, J R; Siedentop, K H; Orsay, C P; Pearl, R K; Nelson, R L; Abcarian, H

1999-10-01

The aim of this article is to provide a concise and simple technical manual for manufacturing autologous fibrin tissue adhesive derived from the precipitation of fibrinogen using a combination of ethanol and freezing for surgery. All materials and equipment needed to manufacture ethanol-based autologous fibrin tissue adhesive are listed. In addition, step-by-step instructions are provided to allow for easy and rapid fibrin adhesive production. Ethanol-based autologous fibrin tissue adhesive can be manufactured in under 60 minutes. Furthermore, at our institution the startup cost for manufacturing ethanol-based autologous fibrin tissue adhesive was under $2,500.00. Ethanol-based autologous fibrin tissue adhesive is a safe, reliable, and easily manufactured autologous fibrin tissue adhesive that can be made by a trained technician in any blood bank, pharmacy, or surgical laboratory.

Laboratory blood analysis in Strigiformes-Part I: hematologic reference intervals and agreement between manual blood cell counting techniques.

PubMed

Ammersbach, Mélanie; Beaufrère, Hugues; Gionet Rollick, Annick; Tully, Thomas

2015-03-01

While hematologic reference intervals (RI) are available for multiple raptorial species of the order Accipitriformes and Falconiformes, there is a lack of valuable hematologic information in Strigiformes that can be used for diagnostic and health monitoring purposes. The objective was to report RI in Strigiformes for hematologic variables and to assess agreement between manual cell counting techniques. A multi-center prospective study was designed to assess hematologic RI and blood cell morphology in owl species. Samples were collected from individuals representing 13 Strigiformes species, including Great Horned Owl, Snowy Owl, Eurasian Eagle Owl, Barred Owl, Great Gray Owl, Ural Owl, Northern Saw-Whet Owls, Northern Hawk Owl, Spectacled Owl, Barn Owl, Eastern Screech Owl, Long-Eared Owl, and Short-Eared Owl. Red blood cell count was determined manually using a hemocytometer. White blood cell count was determined using 3 manual counting techniques: (1) phloxine B technique, (2) Natt and Herrick technique, and (3) estimation from the smear. Differential counts and blood cell morphology were determined on smears. Reference intervals were determined and agreement between methods was calculated. Important species-specific differences were observed in blood cell counts and granulocyte morphology. Differences in WBC count between species did not appear to be predictable based on phylogenetic relationships. Overall, most boreal owl species exhibited a lower WBC count than other species. Important disagreements were found between different manual WBC counting techniques. Disagreements observed between manual counting techniques suggest that technique-specific RI should be used in Strigiformes. © 2015 American Society for Veterinary Clinical Pathology.

ShakeMap manual: technical manual, user's guide, and software guide

USGS Publications Warehouse

Wald, David J.; Worden, Bruce C.; Quitoriano, Vincent; Pankow, Kris L.

2005-01-01

ShakeMap (http://earthquake.usgs.gov/shakemap) --rapidly, automatically generated shaking and intensity maps--combines instrumental measurements of shaking with information about local geology and earthquake location and magnitude to estimate shaking variations throughout a geographic area. The results are rapidly available via the Web through a variety of map formats, including Geographic Information System (GIS) coverages. These maps have become a valuable tool for emergency response, public information, loss estimation, earthquake planning, and post-earthquake engineering and scientific analyses. With the adoption of ShakeMap as a standard tool for a wide array of users and uses came an impressive demand for up-to-date technical documentation and more general guidelines for users and software developers. This manual is meant to address this need. ShakeMap, and associated Web and data products, are rapidly evolving as new advances in communications, earthquake science, and user needs drive improvements. As such, this documentation is organic in nature. We will make every effort to keep it current, but undoubtedly necessary changes in operational systems take precedence over producing and making documentation publishable.

Inspector's manual for mechanically stabilized earth walls.

DOT National Transportation Integrated Search

2010-06-01

The scope of the project is to develop a condition rating system, creation of an inspector's manual to reference during : inspection or address any training for inspectors at the district level. The research project will develop a MSE wall : conditio...

American Academy of Pediatric Dentistry

MedlinePlus

... 500 Welcome Bonus for AAPD Members! Pediatric Dentist Toolkit Now Available! AAPD Coding and Insurance Manual 2018 Updates Looking to Find a Job? Looking to Fill a Position? Try the New AAPD Career Center Download the AAPD Reference Manual App Today! ...

Incorporating travel time reliability into the Highway Capacity Manual. [supporting datasets

DOT National Transportation Integrated Search

2013-11-30

The Highway Capacity Manual (HCM) historically has been among the most important reference guides used by transportation professionals seeking a systematic basis for evaluating the capacity, level of service, and performance measures for elements of ...

Operator's Manual for Waveform Generator Model RPG-6236-A

DOT National Transportation Integrated Search

1988-02-01

The waveform generator, described in this manual, provides a reference signal standard for use in testing the performance of crash test data acquisition systems. During the test, the waveform generator provides the signal inputs to the data acquisiti...

Genetics Home Reference: atypical hemolytic-uremic syndrome

MedlinePlus

... Kidney Diseases: Kidney Failure: Choosing a Treatment That's Right for You Educational Resources (6 links) Disease InfoSearch: Hemolytic uremic syndrome, atypical MalaCards: genetic atypical hemolytic-uremic syndrome Merck Manual Consumer Version: Overview of Anemia Merck Manual Consumer Version: ...

Desktop Parallax and Proper Motion: A Laboratory Exercise on Astrometry of Asteroids from Project CLEA

NASA Astrophysics Data System (ADS)

Marschall, L. A.; Snyder, G. A.; Good, R. F.; Hayden, M. B.; Cooper, P. R.

1998-12-01

Students in introductory and advanced astronomy classes can now experience the process of discovering asteroids, can measure proper motions, and can actually see the parallax of real astronomical objects on the screen, using a new set of computer-based exercises from Project CLEA. The heart of the exercise is a sophisticated astrometry program "Astrometry of Asteroids", which is a restricted version of CLEA's research software "Tools for Astrometry" described elsewhere at this meeting. The program, as used in the teaching lab, allows students to read and display digital images, co-align pairs of images using designated reference stars, blink and identify moving objects on the pairs, compare images with charts produced from the HST Guide Star Catalog (GSC), and fit equatorial coordinates to the images using designated reference stars from the GSC. Complete technical manuals for the exercise are provided for the use of the instructor, and a set of digital images, in FITS format, is included for the exercise. A student manual is provided for an exercise in which students go through the step-by-step process of determining the tangential velocity of an asteroid. Students first examine a series of images of a near-earth asteroid taken over several hours, blinking pairs to identify the moving object. They next measure the equatorial coordinates on a half-dozen images, and from this calculate an angular velocity of the object. Finally, using a pair of images of the asteroid taken simultaneously at the National Undergraduate Research Observatory (NURO) and at Colgate University, they measure the parallax of the asteroid, and thus its distance, which enables them to convert the angular velocity into a tangential velocity. An optional set of 10 pairs of images is provided, some of which contain asteroids, so that students can try to "find the asteroid" for themselves. The software is extremely flexible, and though materials are provided for a self-contained exercise, teachers can adapt the material to a wide variety of uses. The software and manuals are currently available on the Web. Project CLEA is supported by grants from Gettysburg College and the National Science Foundation.

Battery Test Manual For Plug-In Hybrid Electric Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey R. Belt

2010-09-01

This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Program. It is based on technical targets established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the proceduresmore » and supporting analysis, a revision including some modifications and clarifications of these procedures is expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices.« less

Battery Test Manual For Plug-In Hybrid Electric Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey R. Belt

2010-12-01

This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Program. It is based on technical targets established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the proceduresmore » and supporting analysis, a revision including some modifications and clarifications of these procedures is expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices.« less

The Peer Reference Counseling Program at Odum Library. Training Manual.

ERIC Educational Resources Information Center

Lawrence, Tamiko Danielle; Thomas, Susan; Winston, Mark

The Peer Reference Counseling Program at Valdosta State University (Georgia) is a program designed to provide students with a unique opportunity to work at the Reference Desk at Odum Library. This program employs minority students and trains them to work at the Reference Desk answering basic reference questions and utilizing as well as…

Load research manual. Volume 3: Load research for advanced technologies

NASA Astrophysics Data System (ADS)

1980-11-01

Technical guidelines for electric utility load research are presented. Special attention is given to issues raised by the load reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. The manual includes guides to load research literature and glossaries of load research and statistical terms. Special load research procedures are presented for solar, wind, and cogeneration technologies.

Method of Characteristic (MOC) Nozzle Flowfield Solver - User’s Guide and Input Manual Version 2.0

DTIC Science & Technology

2018-01-01

TECHNICAL REPORT RDMR-SS-17-13 METHOD OF CHARACTERISTIC (MOC) NOZZLE FLOWFIELD SOLVER—USER’S GUIDE AND INPUT MANUAL VERSION 2.0 Kevin D. Kennedy...System Simulation and Development Directorate Aviation and Missile Research , Development, and Engineering Center January 2018 Distribution Statement...DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT. DISCLAIMER THE FINDINGS IN THIS REPORT

Roadway reference system users' manual (a.k.a. the reference post system made simple)

DOT National Transportation Integrated Search

1999-05-01

Modern roadway management requires information. The Roadway Reference System (RRS) is a means by which data can be associated to a specific location and retrieved in reference to that location. The major advantage to this system is that once in place...

Study on Classification Accuracy Inspection of Land Cover Data Aided by Automatic Image Change Detection Technology

NASA Astrophysics Data System (ADS)

Xie, W.-J.; Zhang, L.; Chen, H.-P.; Zhou, J.; Mao, W.-J.

2018-04-01

The purpose of carrying out national geographic conditions monitoring is to obtain information of surface changes caused by human social and economic activities, so that the geographic information can be used to offer better services for the government, enterprise and public. Land cover data contains detailed geographic conditions information, thus has been listed as one of the important achievements in the national geographic conditions monitoring project. At present, the main issue of the production of the land cover data is about how to improve the classification accuracy. For the land cover data quality inspection and acceptance, classification accuracy is also an important check point. So far, the classification accuracy inspection is mainly based on human-computer interaction or manual inspection in the project, which are time consuming and laborious. By harnessing the automatic high-resolution remote sensing image change detection technology based on the ERDAS IMAGINE platform, this paper carried out the classification accuracy inspection test of land cover data in the project, and presented a corresponding technical route, which includes data pre-processing, change detection, result output and information extraction. The result of the quality inspection test shows the effectiveness of the technical route, which can meet the inspection needs for the two typical errors, that is, missing and incorrect update error, and effectively reduces the work intensity of human-computer interaction inspection for quality inspectors, and also provides a technical reference for the data production and quality control of the land cover data.

Manual Arts to Technology Education: Are We Ripe for Infusing Aspects of a Green Technology into Career and Technical Education Constituent Subjects?

ERIC Educational Resources Information Center

Asunda, Paul A.

2010-01-01

This paper is a conceptual essay that reviews industrial and economic changes that have shaped vocational education to present day Career and Technical Education (CTE) curriculum, and specifically the role of technology education in meeting societal needs. An argument is presented that CTE is ripe to integrate aspects of green technology and…

Operation Manual for the Intensity Based Interrogation of Fibre Bragg Grating Arrays on Vibrating Structures

DTIC Science & Technology

2011-01-01

based demodulation approach for the measurement of strains, induced by structural vibrations, using Fiber Bragg Gratings ( FBG ). This companion...provide the Frequency Response Functions from a series of FBG arrays attached to a vibrating structure. RELEASE LIMITATION Approved for... FBG arrays attached to a vibrating structure. Both this technical note and its companion technical report are formal contributions to an

The Evolution of a Graduate Writing Program: The Master of Arts in Professional Writing at Carnegie Mellon University. CDC Technical Report No. 33.

ERIC Educational Resources Information Center

Jones, G. H.; Steinberg, E. R.

The Master of Arts in Professional Writing (MAPW) offered by Carnegie Mellon University (Pennsylvania) is designed for students who want careers as document designers in industry and government, where they will plan, write, and evaluate computer manuals and on-line documentation, training and instructional materials, technical reports, and a wide…

Technical Handbook for Facilities Engineering and Construction Manual, Part 2: Federally Assisted Activities. Guide for Project Applicants-Construction Management Services. Department Technical Handbook Series.

ERIC Educational Resources Information Center

Department of Health , Education, and Welfare, Washington., DC. Office of the Secretary.

This handbook provides a basis for consideration of acceptable approaches which are available and may be used to initiate the use of construction management services in the planning, design, and construction of federally assisted construction projects. It includes the mandatory federal requirements as well as acceptable procedures for selecting…

Helicopter Dynamic Performance Program. Volume 2. User’s Manual

DTIC Science & Technology

1980-07-01

Technologies Corporation Stratford, Connecticut 06602 July 1980 Final Report / • ., . Approved for public release; I distribution unlimited. ; A - Prepared...for : APPLIED TECHNOLOGY LABORATORY U. S. ARMY RESEARCH AND TECHNOLOGY LABORATORIES (AVRADCOM) Fort Eustis, Va. 23604 80 8 27 D APPLIED TECHNOLOGY ... Technology Division. Technic31 review of this report was also pro- vided by Messrs. W_ A. Pleasants of Design Integration and Analysis Technical Area

Community Involvement Manual.

DTIC Science & Technology

1979-05-01

and social problems, does not lend itself to a single or simple solution. This is why we must all be involved. For this reason we. believe that...of admission to decisionmaking. At times the implications of this relatively simple premise are not minor. Many people beginning community...involvement programs have found it extremely difficult to locate technical people able to translate technical reports into simple , every- day English. There

RELBET 4.0 programmer's manual

NASA Technical Reports Server (NTRS)

Huysman, B. P.; Kwong, P. S.; Pieniazek, L. A.

1986-01-01

The RELBET 4.0 System as implemented on the Hewlett Packard model 9000 computer system is described. The manual is directed toward programmers and system maintenance personnel. It is intended to serve both as a reference and as a introductory guide to the software. The body of the manual provides an overview of major features and indicates where to look for further information. Full details are left to Appendices.

GILA User's Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

CHRISTON, MARK A.

2003-06-01

GILA is a finite element code that has been developed specifically to attack the class of transient, incompressible, viscous, fluid dynamics problems that are predominant in the world that surrounds us. The purpose for this document is to provide sufficient information for an experienced analyst to use GILA in an effective way. The GILA User's Manual presents a technical outline of the governing equations for time-dependent incompressible flow, and the explicit and semi-implicit projection methods used in GILA to solve the equations. This manual also presents a brief overview of some of GILA's capabilities along with the keyword input syntaxmore » and sample problems.« less

ANSI/ASHRAE/IES Standard 90.1-2016 Performance Rating Method Reference Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goel, Supriya; Rosenberg, Michael I.; Eley, Charles

This document is intended to be a reference manual for the Appendix G Performance Rating Method (PRM) of ANSI/ASHRAE/IES Standard 90.1-2016 (Standard 90.1-2016). The PRM can be used to demonstrate compliance with the standard and to rate the energy efficiency of commercial and high-rise residential buildings with designs that exceed the requirements of Standard 90.1. Use of the PRM for demonstrating compliance with Standard 90.1 is a new feature of the 2016 edition. The procedures and processes described in this manual are designed to provide consistency and accuracy by filling in gaps and providing additional details needed by users ofmore » the PRM.« less

ENVIROCLEAN

EPA Pesticide Factsheets

Technical product bulletin: this surface washing agent used in oil spill cleanups may be applied via manual pressure applicator or other delivery to impacted surfaces. Should be diluted before use with hard, soft, brackish, or salt water.

Fundamentals of bridge maintenance and inspection : manual for a workshop on bridge maintenance/inspection

DOT National Transportation Integrated Search

1997-07-01

This manual supplements the New York State Department of Transportation's one-day workshop on "Bridge Maintenance/Inspection." More specifically, it is intended as a handy reference for preventive-maintenance and corrective-maintenance activities app...

Antifungal Susceptibility Testing in HIV/AIDS Patients: a Comparison Between Automated Machine and Manual Method.

PubMed

Nelwan, Erni J; Indrasanti, Evi; Sinto, Robert; Nurchaida, Farida; Sosrosumihardjo, Rustadi

2016-01-01

to evaluate the performance of Vitek2 compact machine (Biomerieux Inc. ver 04.02, France) in reference to manual methods for susceptibility test for Candida resistance among HIV/AIDS patients. a comparison study to evaluate Vitek2 compact machine (Biomerieux Inc. ver 04.02, France) in reference to manual methods for susceptibility test for Candida resistance among HIV/AIDS patient was done. Categorical agreement between manual disc diffusion and Vitek2 machine was calculated using predefined criteria. Time to susceptibility result for automated and manual methods were measured. there were 137 Candida isolates comprising eight Candida species with C.albicans and C. glabrata as the first (56.2%) and second (15.3%) most common species, respectively. For fluconazole drug, among the C. albicans, 2.6% was found resistant on manual disc diffusion methods and no resistant was determined by Vitek2 machine; whereas 100% C. krusei was identified as resistant on both methods. Resistant patterns for C. glabrata to fluconazole, voriconazole and amphotericin B were 52.4%, 23.8%, 23.8% vs. 9.5%, 9.5%, 4.8% respectively between manual diffusion disc methods and Vitek2 machine. Time to susceptibility result for automated methods compared to Vitex2 machine was shorter for all Candida species. there is a good categorical agreement between manual disc diffusion and Vitek2 machine, except for C. glabrata for measuring the antifungal resistant. Time to susceptibility result for automated methods is shorter for all Candida species.

Reference Materials and Services for a Small Hospital Library. 5th Revised Edition.

ERIC Educational Resources Information Center

Kesti, Julie, Comp.; Graham, Elaine, Comp.

This manual suggests and describes recommended reference services and sources for a small hospital library. Focusing on reference services, the first section includes information on ready-reference services; bibliographic search services, including taking and processing a request for a bibliography, National Library of Medicine literature…

Comparison of remote magnetic navigation ablation and manual ablation of idiopathic ventricular arrhythmia after failed manual ablation.

PubMed

Kawamura, Mitsuharu; Scheinman, Melvin M; Tseng, Zian H; Lee, Byron K; Marcus, Gregory M; Badhwar, Nitish

2017-01-01

Catheter ablation for idiopathic ventricular arrhythmia (VA) is effective and safe, but efficacy is frequently limited due to an epicardial origin and difficult anatomy. The remote magnetic navigation (RMN) catheter has a flexible catheter design allowing access to difficult anatomy. We describe the efficacy of the RMN for ablation of idiopathic VA after failed manual ablation. Among 235 patients with idiopathic VA referred for catheter ablation, we identified 51 patients who were referred for repeat ablation after a failed manual ablation. We analyzed the clinical characteristics, including the successful ablation site and findings at electrophysiology study, in repeat procedures conducted using RMN as compared with manual ablation. Among these patients, 22 (43 %) underwent repeat ablation with the RMN and 29 (57 %) underwent repeat ablation with a manual ablation. Overall, successful ablation rate was significantly higher using RMN as compared with manual ablation (91 vs. 69 %, P = 0.02). Fluoroscopy time in the RMN was 17 ± 12 min as compared with 43 ± 18 min in the manual ablation (P = 0.009). Successful ablation rate in the posterior right ventricular outflow tract (RVOT) plus posterior-tricuspid annulus was higher with RMN as compared with manual ablation (92 vs. 50 %, P = 0.03). Neither groups exhibited any major complications. The RMN is more effective in selected patients with recurrent idiopathic VA after failed manual ablation and is associated with less fluoroscopy time. The RMN catheters have a flexible design enabling them to access otherwise difficult anatomy including the posterior tricuspid annulus and posterior RVOT.

NASA scientific and technical publications: A catalog of special publications, reference publications, conference publications, and technical papers, 1987-1990

NASA Technical Reports Server (NTRS)

1991-01-01

This catalog lists 783 citations of all NASA Special Publications, NASA Reference Publications, NASA Conference Publications, and NASA Technical Papers that were entered into NASA Scientific and Technical Information Database during the year's 1987 through 1990. The entries are grouped by subject category. Indexes of subject terms, personal authors, and NASA report numbers are provided.

NASA scientific and technical publications: A catalog of special publications, reference publications, conference publications, and technical papers, 1989

NASA Technical Reports Server (NTRS)

1990-01-01

This catalog lists 190 citations of all NASA Special Publications, NASA Reference Publications, NASA Conference Publications, and NASA Technical Papers that were entered into the NASA scientific and technical information database during accession year 1989. The entries are grouped by subject category. Indexes of subject terms, personal authors, and NASA report numbers are provided.

NASA scientific and technical publications: A catalog of special publications, reference publications, conference publications, and technical papers, 1991-1992

NASA Technical Reports Server (NTRS)

1993-01-01

This catalog lists 458 citations of all NASA Special Publications, NASA Reference Publications, NASA Conference Publications, and NASA Technical Papers that were entered into the NASA Scientific and Technical Information database during accession year 1991 through 1992. The entries are grouped by subject category. Indexes of subject terms, personal authors, and NASA report numbers are provided.

NASA scientific and technical publications: A catalog of Special Publications, Reference Publications, Conference Publications, and Technical Papers, 1987

NASA Technical Reports Server (NTRS)

1988-01-01

This catalog lists 239 citations of all NASA Special Publications, NASA Reference Publications, NASA Conference Publications, and NASA Technical Papers that were entered in the NASA scientific and technical information database during accession year 1987. The entries are grouped by subject category. Indexes of subject terms, personal authors, and NASA report numbers are provided.

Quantitative Radiology: Automated CT Liver Volumetry Compared With Interactive Volumetry and Manual Volumetry

PubMed Central

Suzuki, Kenji; Epstein, Mark L.; Kohlbrenner, Ryan; Garg, Shailesh; Hori, Masatoshi; Oto, Aytekin; Baron, Richard L.

2014-01-01

OBJECTIVE The purpose of this study was to evaluate automated CT volumetry in the assessment of living-donor livers for transplant and to compare this technique with software-aided interactive volumetry and manual volumetry. MATERIALS AND METHODS Hepatic CT scans of 18 consecutively registered prospective liver donors were obtained under a liver transplant protocol. Automated liver volumetry was developed on the basis of 3D active-contour segmentation. To establish reference standard liver volumes, a radiologist manually traced the contour of the liver on each CT slice. We compared the results obtained with automated and interactive volumetry with those obtained with the reference standard for this study, manual volumetry. RESULTS The average interactive liver volume was 1553 ± 343 cm3, and the average automated liver volume was 1520 ± 378 cm3. The average manual volume was 1486 ± 343 cm3. Both interactive and automated volumetric results had excellent agreement with manual volumetric results (intraclass correlation coefficients, 0.96 and 0.94). The average user time for automated volumetry was 0.57 ± 0.06 min/case, whereas those for interactive and manual volumetry were 27.3 ± 4.6 and 39.4 ± 5.5 min/case, the difference being statistically significant (p < 0.05). CONCLUSION Both interactive and automated volumetry are accurate for measuring liver volume with CT, but automated volumetry is substantially more efficient. PMID:21940543

Quantitative radiology: automated CT liver volumetry compared with interactive volumetry and manual volumetry.

PubMed

Suzuki, Kenji; Epstein, Mark L; Kohlbrenner, Ryan; Garg, Shailesh; Hori, Masatoshi; Oto, Aytekin; Baron, Richard L

2011-10-01

The purpose of this study was to evaluate automated CT volumetry in the assessment of living-donor livers for transplant and to compare this technique with software-aided interactive volumetry and manual volumetry. Hepatic CT scans of 18 consecutively registered prospective liver donors were obtained under a liver transplant protocol. Automated liver volumetry was developed on the basis of 3D active-contour segmentation. To establish reference standard liver volumes, a radiologist manually traced the contour of the liver on each CT slice. We compared the results obtained with automated and interactive volumetry with those obtained with the reference standard for this study, manual volumetry. The average interactive liver volume was 1553 ± 343 cm(3), and the average automated liver volume was 1520 ± 378 cm(3). The average manual volume was 1486 ± 343 cm(3). Both interactive and automated volumetric results had excellent agreement with manual volumetric results (intraclass correlation coefficients, 0.96 and 0.94). The average user time for automated volumetry was 0.57 ± 0.06 min/case, whereas those for interactive and manual volumetry were 27.3 ± 4.6 and 39.4 ± 5.5 min/case, the difference being statistically significant (p < 0.05). Both interactive and automated volumetry are accurate for measuring liver volume with CT, but automated volumetry is substantially more efficient.

A Manual on the Primary Prevention of Developmental Disabilities.

ERIC Educational Resources Information Center

Whitley, Elizabeth B.; Skiles, Laura Lopater

This manual presents information about major causes of developmental disabilities, discusses strategies to prevent development disabilities, and identifies relevant resources and reference material. Introductory information defines developmental disabilities and prevention (under Virginia statutes). The first section considers causes prior to and…

Support for Astronaut's View of Mexican/ Central American Fires and on-Line Earth Observations Training Manual

NASA Technical Reports Server (NTRS)

Kaminski, Charles F., Jr.

1999-01-01

A small project to compile remote sensing and in-site data to review the processes leading to the May 1998 Mexican/Central American fires was undertaken. A web page based on this project was assembled. The second project initiated involved an interactive and on-line program that will replace the paper version of the Earth Observations Preflight Training Manual. Technical support was provided to Prof. Marvin Glasser as needed.

First-trimester surgical abortion technique.

PubMed

Yonke, Nicole; Leeman, Lawrence M

2013-12-01

New data have emerged to support changes in first-trimester abortion practice in regard to antibiotic prophylaxis, cervical ripening, the use of manual vacuum aspiration, and pain management. This article addresses these new recommendations and reviews techniques in performing manual and electric vacuum uterine aspiration procedures before 14 weeks' gestation, including very early abortion (<7 weeks' gestation), technically difficult abortions, management of complications, and postabortal contraception. The information discussed also applies to miscarriage management. Copyright © 2013 Elsevier Inc. All rights reserved.

An Overview of Potential Methods for Maintaining Training Area Environments in Arid and Semi-Arid Climates

DTIC Science & Technology

1983-04-01

Shrubs , Ground Covers, and Vines , Technical Manual 5-830-4 (June 1976). This manual provides guidelines and prescribes standard techniques to be used...in planting and the initial care required to successfully establish trees, shrubs , ground covers, and vines . Criteria for selecting materials are...their new location. The planting of trees, shrubs , ground covers, and vines should comply with approved landscape planting plans and should be based on

The Design of an Interface to a Programming System and MENUNIX: A Menu-Based Interface to UNIX (User Manual). Two Papers in Cognitive Engineering. Technical Report No. 8105.

ERIC Educational Resources Information Center

Perlman, Gary

This report consists of two papers on MENUNIX, an experimental interface to the approximately 300 programs and files available on the Berkeley UNIX 4.0 version of the UNIX operating system. The first paper discusses some of the psychological concerns involved in the design of MENUNIX; the second is a tutorial user manual for MENUNIX, in which the…

Criterion-Referenced Measurement in the Army: Development of a Research- Based, Practical, Test Construction Manual

DTIC Science & Technology

1978-09-01

iE ARI TECHNICAL REPORT S~ TR-78-A31 M CCriterion-Reforencod Loasurement In the Army: Development of a Research-Based, Practical, Test Construction ...conducted to develop a Criterion- 1 Referenced Tests (CRTs) Construction Manual. Major accomplishments were the preparation of a written review of the...survey of the literature on Criterion-Referenced Testing’ conducted in order to provide an information base for development of the CRT Construction

The Role of the Corps Air Defense Artillery Brigade

DTIC Science & Technology

1990-06-01

literature pertaining to the corps air defense artillery brigades. In most air defense artillery field manuals (FM), reference to a unit above brigade...available information and focus on the information which directly applies to the thesis. I primarily used U.S. Army field manuals to research the...The brigade will be primarily operating in a decentralized mode due to the inevitable communications breakdowns that will occur. Therefore, manual

Structural Impact of Construction Loads : [Technical Summary

DOT National Transportation Integrated Search

2012-01-01

Numerous bridge construction accidents have occurred : because of construction loadings, which are an underemphasized : topic in many specifications and design : manuals. Bridge girders are least stable during the : construction phase, so it is impor...

BASINS User Information and Guidance

EPA Pesticide Factsheets

This page provides links to guidance on how to use BASINS, including the User’s Manual, tutorials and training, technical notes, case studies, and publications that highlight the use of BASINS in various watershed analyses.

Vision statement.

DOT National Transportation Integrated Search

2003-09-01

This document is the third such handbook for freeway management and operations. It is intended to be an introductory manual a resource document that provides an overview of the various institutional and technical issues associated with the planni...

JEP-MARINE CLEAN

EPA Pesticide Factsheets

Technical product bulletin: aka ECOVOOM-MARINE, this surface washing agent is used in oil spill cleanups. Manual pump sprayers should be used to presoak contaminated areas, then pressure washers used to agitate after presoak has been applied.

Support Equipment Management in the F/A-18 Program

DTIC Science & Technology

1986-12-01

or character (such as manuals and drawings) of a scientific or technical nature. Computer programs and related software are not technical data...documentation of computer programs and related software are. Also excluded are financial data or other information related to contract administration. 6...management in the F/A-18 program . Graeser, Kenneth S. http://hdl.handle.net/10945/22133 Downloaded from NPS Archive: Calhoun NAVAL POSTGRADUATE SCHOOL Monterey

Application of DNA Profiling in Resolving Aviation Forensic Toxicology Issues

DTIC Science & Technology

2009-10-01

National Technical Information Service, Springfield, VA 22161 19. Security Classif. (of this report) 20. Security Classif. (of this page) 21 ...J,. Schumm. JW ..Development. of. highly. polymorphic.pentanucleotide.tandem.repeat.loci. with.low.stutter ..Profiles in DNA ..1998;2:3–6 . 21 ... PowerPlex ™ 16 System, Technical Manual No. D012 ..Madison,.WI:.Promega.Cor- poration;. 2000. (Available. at:. www .cstl .nist .gov/ strbase/images

Air Force Research Laboratory Wright Site Guide to Technical Publishing

DTIC Science & Technology

2005-04-01

Scientific and Technical Reports—Elements, Organization, and Design manual (and a version modified for documents generated for AFRL) • Merriam-Webster’s...notice page --SF 298 --original graphics /halftones Indicate the following on the letter of transmittal sheet: --quantity of copies required for...Elements, Organization and Design ? The WRS CDRL for a final report requires that the standard be followed. The only exception is SBIR Phase 1

Stationary Engineering Science Manual--3.

ERIC Educational Resources Information Center

Steingress, Frederick M.; And Others

This manual provides in-depth coverage of topics related to boiler operations. The assignments contain an objective, descriptive information, reference sources, procedures, and assignments. Sixteen units are provided and address topics such as: (1) steam engineering concepts; (2) boiler fittings; (3) feed-water, steam, and combustion accessories;…

Dental Laboratory Technology.

ERIC Educational Resources Information Center

Department of the Air Force, Washington, DC.

The Air Force dental laboratory technology manual is designed as a basic training text as well as a reference source for dental laboratory technicians, a specialty occupation concerned with the design, fabrication, and repair of dental prostheses. Numerous instructive diagrams and photographs are included throughout the manual. The comprehensive…

Comparative Costs of Manual and On-line Bibliographic Searching: A Review of the Literature.

ERIC Educational Resources Information Center

East, H.

1980-01-01

A review of published studies reveals that the cost of comparable manual and online searches are approximately equal. Cost trends and the relative effectiveness of both methods are evaluated. A bibliography of 51 references is appended. (Author/RAA)

Depleted Uranium: Technical Brief

EPA Pesticide Factsheets

This technical brief provides accepted data and references to additional sources for radiological and chemical characteristics, health risks and references for both the monitoring and measurement, and applicable treatment techniques for depleted uranium.

Bethesda 2014: improving on a paradigm shift.

PubMed

Wilbur, D C; Nayar, R

2015-12-01

The third iteration of the Bethesda System terminology manual was recently published. This update included changes in the reporting of benign endometrial cells, and guidance for special adequacy situations and for cases in which low grade squamous intraepithelial lesions are accompanied by some cells suggesting that a high grade lesion might also be present. In addition, the manual was increased in size to include more illustrations with special studies and comparisons to histology, a greatly increased reference list, and a new chapter devoted to the modern practice of risk-based management. The third edition of the Bethesda manual is meant to serve as a primary reference for the practice of gynecologic cytology designed to provide a uniform system of reporting Worldwide for clinical, teaching, and research purposes. © 2015 John Wiley & Sons Ltd.

Archaeology: A Student's Guide to Reference Sources.

ERIC Educational Resources Information Center

Desautels, Almuth, Comp.

This bibliography lists reference sources for research in archaeology. It is arranged in sections by type of reference source with subsections for general works and works covering specific areas. Categorized are handbooks; directories, biographies, and museums; encyclopedias; dictionaries; atlases; guides, manuals, and surveys; bibliographies; and…

47 CFR 51.327 - Notice of network changes: Content of notice.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., but is not limited to, references to technical specifications, protocols, and standards regarding transmission, signaling, routing, and facility assignment as well as references to technical standards that...

47 CFR 51.327 - Notice of network changes: Content of notice.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., but is not limited to, references to technical specifications, protocols, and standards regarding transmission, signaling, routing, and facility assignment as well as references to technical standards that...

47 CFR 51.327 - Notice of network changes: Content of notice.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., but is not limited to, references to technical specifications, protocols, and standards regarding transmission, signaling, routing, and facility assignment as well as references to technical standards that...

Automatic segmentation for detecting uterine fibroid regions treated with MR-guided high intensity focused ultrasound (MR-HIFU).

PubMed

Antila, Kari; Nieminen, Heikki J; Sequeiros, Roberto Blanco; Ehnholm, Gösta

2014-07-01

Up to 25% of women suffer from uterine fibroids (UF) that cause infertility, pain, and discomfort. MR-guided high intensity focused ultrasound (MR-HIFU) is an emerging technique for noninvasive, computer-guided thermal ablation of UFs. The volume of induced necrosis is a predictor of the success of the treatment. However, accurate volume assessment by hand can be time consuming, and quick tools produce biased results. Therefore, fast and reliable tools are required in order to estimate the technical treatment outcome during the therapy event so as to predict symptom relief. A novel technique has been developed for the segmentation and volume assessment of the treated region. Conventional algorithms typically require user interaction ora priori knowledge of the target. The developed algorithm exploits the treatment plan, the coordinates of the intended ablation, for fully automatic segmentation with no user input. A good similarity to an expert-segmented manual reference was achieved (Dice similarity coefficient = 0.880 ± 0.074). The average automatic segmentation time was 1.6 ± 0.7 min per patient against an order of tens of minutes when done manually. The results suggest that the segmentation algorithm developed, requiring no user-input, provides a feasible and practical approach for the automatic evaluation of the boundary and volume of the HIFU-treated region.

LLCEDATA and LLCECALC for Windows version 1.0, Volume 3: Software verification and validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

McFadden, J.G.

1998-09-04

LLCEDATA and LLCECALC for Windows are user-friendly computer software programs that work together to determine the proper waste designation, handling, and disposition requirements for Long Length Contaminated Equipment (LLCE). LLCEDATA reads from a variety of data bases to produce an equipment data file(EDF) that represents a snapshot of both the LLCE and the tank from which it originates. LLCECALC reads the EDF and the gamma assay file (AV2) that is produced by the flexible Receiver Gamma Energy Analysis System. LLCECALC performs corrections to the AV2 file as it is being read and characterizes the LLCE. Both programs produce a varietymore » of reports, including a characterization report and a status report. The status report documents each action taken by the user, LLCEDATA, and LLCECALC. Documentation for LLCEDATA and LLCECALC for Windows is available in three volumes. Volume 1 is a user`s manual, which is intended as a quick reference for both LLCEDATA and LLCECALC. Volume 2 is a technical manual, which discusses system limitations and provides recommendations to the LLCE process. Volume 3 documents LLCEDATA and LLCECALC`s verification and validation. Two of the three installation test cases, from Volume 1, are independently confirmed. Data bases used in LLCEDATA are verified and referenced. Both phases of LLCECALC process gamma and characterization, are extensively tested to verify that the methodology and algorithms used are correct.« less

SUNREL Documentation | Buildings | NREL

Science.gov Websites

using SUNREL software. When changes are made to the manual, we post updates under the updates link below . Although limited technical support is provided to users, we do post answers to some frequently asked

Structural Impact of Construction Loads : [Technical Summary

DOT National Transportation Integrated Search

2012-01-01

Numerous bridge construction accidents have occurred because of construction loadings, which are an underemphasized topic in many specifications and design manuals. Bridge girders are least stable during the construction phase, so it is important for...

77 FR 28353 - Foreign-Trade Zone 45-Portland, OR, Notification of Proposed Production Activity, Shimadzu USA...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

...; filter paper; technical books and manuals; textile-covered foam shielding; ceramic hardware and fittings... cables (including fiber optic cable); insulators; filters; lenses; mirrors; prisms; other optical...