TurboTech Technical Evaluation Automated System

NASA Technical Reports Server (NTRS)

Tiffany, Dorothy J.

2009-01-01

TurboTech software is a Web-based process that simplifies and semiautomates technical evaluation of NASA proposals for Contracting Officer's Technical Representatives (COTRs). At the time of this reporting, there have been no set standards or systems for training new COTRs in technical evaluations. This new process provides boilerplate text in response to interview style questions. This text is collected into a Microsoft Word document that can then be further edited to conform to specific cases. By providing technical language and a structured format, TurboTech allows the COTRs to concentrate more on the actual evaluation, and less on deciding what language would be most appropriate. Since the actual word choice is one of the more time-consuming parts of a COTRs job, this process should allow for an increase in quantity of proposals evaluated. TurboTech is applicable to composing technical evaluations of contractor proposals, task and delivery orders, change order modifications, requests for proposals, new work modifications, task assignments, as well as any changes to existing contracts.

77 FR 28668 - Technical Standard Order (TSO)-C91a, Emergency Locator Transmitters (ELTs)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-15

... installed in new production airplanes for over the past 5-years. The FAA reiterates in this final notice... questions. The first question regarded permissibility of minor and major changes to existing TSO-C91a... meet the minimum performance standards contained in TSO-C126a. Cobham's second question requested...

75 FR 79328 - Technical Corrections to the Standards Applicable to Generators of Hazardous Waste; Alternative...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-20

..., 541710 Research and Development in the Physical, Engineering, and Life Sciences. 54172, 541720 Research and Development in the Social Sciences and Humanities. III. Statutory and Executive Order Reviews For...

TSO C-129 approvals and anticipated approvals

DOT National Transportation Integrated Search

2001-01-01

This document contains a table of the approvals and anticipated approvals of TSO-C129a equipment (the technical standard order (TSO) for Airborne Supplemental Navigation Equipment Using the Global Positioning System (GPS)). This TSO prescribes the mi...

An SNMP-based solution to enable remote ISO/IEEE 11073 technical management.

PubMed

Lasierra, Nelia; Alesanco, Alvaro; García, José

2012-07-01

This paper presents the design and implementation of an architecture based on the integration of simple network management protocol version 3 (SNMPv3) and the standard ISO/IEEE 11073 (X73) to manage technical information in home-based telemonitoring scenarios. This architecture includes the development of an SNMPv3-proxyX73 agent which comprises a management information base (MIB) module adapted to X73. In the proposed scenario, medical devices (MDs) send information to a concentrator device [designated as compute engine (CE)] using the X73 standard. This information together with extra information collected in the CE is stored in the developed MIB. Finally, the information collected is available for remote access via SNMP connection. Moreover, alarms and events can be configured by an external manager in order to provide warnings of irregularities in the MDs' technical performance evaluation. This proposed SNMPv3 agent provides a solution to integrate and unify technical device management in home-based telemonitoring scenarios fully adapted to X73.

77 FR 37470 - Technical Standard Order (TSO)-C65a, Airborne Doppler Radar Ground Speed and/or Drift Angle...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-21

... inputs to semiautomatic self-contained dead reckoning navigation systems which were not continuously... Doppler sensor equipment that provides inputs to dead reckoning navigation systems obsolete. On August 18...

78 FR 19063 - Airworthiness Approval for Aircraft Forward-Looking Windshear and Turbulence Radar Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-28

... Technical Standard Order (TSO)-C63d, Airborne Weather Radar Equipment. The objective is to leverage the..., Airborne Weather and Ground Mapping Pulsed Radars. The FAA and industry collaborated on the end-to-end...

Technical Challenges of Enterprise Imaging: HIMSS-SIIM Collaborative White Paper.

PubMed

Clunie, David A; Dennison, Don K; Cram, Dawn; Persons, Kenneth R; Bronkalla, Mark D; Primo, Henri Rik

2016-10-01

This white paper explores the technical challenges and solutions for acquiring (capturing) and managing enterprise images, particularly those involving visible light applications. The types of acquisition devices used for various general-purpose photography and specialized applications including dermatology, endoscopy, and anatomic pathology are reviewed. The formats and standards used, and the associated metadata requirements and communication protocols for transfer and workflow are considered. Particular emphasis is placed on the importance of metadata capture in both order- and encounter-based workflow. The benefits of using DICOM to provide a standard means of recording and accessing both metadata and image and video data are considered, as is the role of IHE and FHIR.

14 CFR 1.2 - Abbreviations and symbols.

Code of Federal Regulations, 2011 CFR

2011-01-01

... alignment indicator lights. TACAN means ultra-high frequency tactical air navigational aid. TAS means true... means technical standard order. TVOR means very high frequency terminal omnirange station. V Ameans... 2minmeans minimum takeoff safety speed. VFRmeans visual flight rules. VHFmeans very high frequency. VORmeans...

14 CFR 1.2 - Abbreviations and symbols.

Code of Federal Regulations, 2014 CFR

2014-01-01

... alignment indicator lights. TACAN means ultra-high frequency tactical air navigational aid. TAS means true... means technical standard order. TVOR means very high frequency terminal omnirange station. V Ameans... 2minmeans minimum takeoff safety speed. VFRmeans visual flight rules. VHFmeans very high frequency. VORmeans...

14 CFR 1.2 - Abbreviations and symbols.

Code of Federal Regulations, 2013 CFR

2013-01-01

... alignment indicator lights. TACAN means ultra-high frequency tactical air navigational aid. TAS means true... means technical standard order. TVOR means very high frequency terminal omnirange station. V Ameans... 2minmeans minimum takeoff safety speed. VFRmeans visual flight rules. VHFmeans very high frequency. VORmeans...

14 CFR 1.2 - Abbreviations and symbols.

Code of Federal Regulations, 2012 CFR

2012-01-01

... alignment indicator lights. TACAN means ultra-high frequency tactical air navigational aid. TAS means true... means technical standard order. TVOR means very high frequency terminal omnirange station. V Ameans... 2minmeans minimum takeoff safety speed. VFRmeans visual flight rules. VHFmeans very high frequency. VORmeans...

Professional technical standards in colleges and schools of pharmacy.

PubMed

Berry, Tricia M; Chichester, Clinton O; Lundquist, Lisa M; Sanoski, Cynthia A; Woodward, Donald A; Worley, Marcia M; Early, Johnnie L

2011-04-11

To determine the prevalence, characteristics, and use of professional technical standards among colleges and schools of pharmacy accredited by the Accreditation Council for Pharmacy Education (ACPE). The Web site of every college and school of pharmacy accredited by ACPE was searched to identify information regarding the availability, content, and use of technical standards and to obtain demographic information. Information was obtained from all of the 114 colleges and schools of pharmacy and 67 (59%) had technical standards in place. Common themes for technical standards were: observation; communication; motor; intellectual, conceptual, integrative and quantitative abilities; and behavioral and social attributes. Of those colleges and schools with technical standards, 61 (91%) had standards that addressed all 5 of these themes and 34 (51%) specified that the technical standards were used in their admission, progression, and graduation procedures. More than half of the colleges and schools of pharmacy examined in this study have technical standards; however, 41% have yet to develop and implement them. Colleges and schools of pharmacy looking for guidance in technical standards development could use the technical standards themes identified in this study.

Professional Technical Standards in Colleges and Schools of Pharmacy

PubMed Central

Berry, Tricia M.; Chichester, Clinton O.; Sanoski, Cynthia A.; Woodward, Donald A.; Worley, Marcia M.; Early, Johnnie L.

2011-01-01

Objective To determine the prevalence, characteristics, and use of professional technical standards among colleges and schools of pharmacy accredited by the Accreditation Council for Pharmacy Education (ACPE). Methods The Web site of every college and school of pharmacy accredited by ACPE was searched to identify information regarding the availability, content, and use of technical standards and to obtain demographic information. Results Information was obtained from all of the 114 colleges and schools of pharmacy and 67 (59%) had technical standards in place. Common themes for technical standards were: observation; communication; motor; intellectual, conceptual, integrative and quantitative abilities; and behavioral and social attributes. Of those colleges and schools with technical standards, 61 (91%) had standards that addressed all 5 of these themes and 34 (51%) specified that the technical standards were used in their admission, progression, and graduation procedures. Conclusion More than half of the colleges and schools of pharmacy examined in this study have technical standards; however, 41% have yet to develop and implement them. Colleges and schools of pharmacy looking for guidance in technical standards development could use the technical standards themes identified in this study. PMID:21655404

DOE technical standards list: Department of Energy standards index

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This technical standards list (TSL) was prepared for use by personnel involved in the selection and use of US DOE technical standards and other government and non-government standards. This TSL provides listings of current DOE technical standards, non-government standards that have been adopted by DOE, other government documents in which DOE has a recorded interest, and cancelled DOE technical standards. Standards are indexed by type in the appendices to this document. Definitions of and general guidance for the use of standards are also provided.

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 6 2012-01-01 2012-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 6 2014-01-01 2014-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 6 2011-01-01 2011-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 6 2013-01-01 2013-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

NASA Technical Standards Program and Implications for Lessons Learned and Technical Standard Integration

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The National Aeronautics and Space Agency consists of fourteen Facilities throughout the United States. They are organized to support the Agency's principal Enterprises: (1) Space Science, (2) Earth Science, (3) Aerospace Technology, (4) Human Exploration and Development of Space, and (5) Biological and Physical Research. Technical Standards are important to the activities of each Enterprise and have been an integral part in the development and operation of NASA Programs and Projects since the Agency was established in 1959. However, for years each Center was responsible for its own standards development and selection of non-NASA technical standards that met the needs of Programs and Projects for which they were responsible. There were few Agencywide applicable Technical Standards, mainly those in area of safety. Department of Defense Standards and Specifications were the foundation and main source for Technical Standards used by the Agency. This process existed until about 1997 when NASA embarked on a Program to convert NASA's Center-developed Technical Standards into Agencywide endorsed NASA Preferred Technical Standards. In addition, action was taken regarding the formal adoption of non-NASA Technical Standards (DOD, SAE, ASTM, ASME, IEEE, etc.) as NASA Preferred Technical Standards.

76 FR 50808 - Airborne Supplemental Navigation Equipment Using the Global Positioning System (GPS)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-16

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Airborne Supplemental Navigation.... ACTION: Notice of intent to cancel Technical Standard Order (TSO)- C129a, Airborne Supplemental... notice announces the FAA's intent to cancel TSO-C129a, Airborne Supplemental Navigation Equipment Using...

77 FR 21834 - Airborne Radar Altimeter Equipment (For Air Carrier Aircraft)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-11

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Airborne Radar Altimeter Equipment... Technical Standard Order (TSO)-C67, Airborne Radar Altimeter Equipment (For Air Carrier Aircraft). SUMMARY: This is a confirmation notice of the cancellation of TSO-C67, Airborne Radar Altimeter Equipment (For...

Development of NASA Technical Standards Program Relative to Enhancing Engineering Capabilities

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.

2003-01-01

The enhancement of engineering capabilities is an important aspect of any organization; especially those engaged in aerospace development activities. Technical Standards are one of the key elements of this endeavor. The NASA Technical Standards Program was formed in 1997 in response to the NASA Administrator s directive to develop an Agencywide Technical Standards Program. The Program s principal objective involved the converting Center-unique technical standards into Agency wide standards and the adoption/endorsement of non-Government technical standards in lieu of government standards. In the process of these actions, the potential for further enhancement of the Agency s engineering capabilities was noted relative to value of being able to access Agencywide the necessary full-text technical standards, standards update notifications, and integration of lessons learned with technical standards, all available to the user from one Website. This was accomplished and is now being enhanced based on feedbacks from the Agency's engineering staff and supporting contractors. This paper addresses the development experiences with the NASA Technical Standards Program and the enhancement of the Agency's engineering capabilities provided by the Program s products. Metrics are provided on significant aspects of the Program.

77 FR 53962 - Technical Standard Order (TSO)-C65a, Airborne Doppler Radar Ground Speed and/or Drift Angle...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-04

... measuring equipment described by this TSO was used to provide inputs to semiautomatic self-contained dead... dead reckoning navigation systems obsolete. On August 18, 1983, the FAA published TSO-C65a. The FAA has...

Littoral Combat Ship (LCS) Project: Consideration of an ASVAB Requirement for JOOD Screening

DTIC Science & Technology

2013-08-01

developed for the Submarine community. Sailors classified to the non-technical ratings of the Submarine Community ( Culinary Specialist, Storekeeper...ratings ( Culinary Specialist; Storekeeper; and Yeoman) and Seaman must meet the Submarine ASVAB “floor” standard in order to pass their submarine

Human factors considerations in the design and evaluation of moving map displays of ownership on the airport surface

DOT National Transportation Integrated Search

2004-09-01

The Federal Aviation Administration (FAA) has requested human factors guidance to support the new moving map Technical Standard Order (TSO)-C165, Electronic Map Display Equipment for Graphical Depiction of Aircraft Position. This document was develop...

77 FR 27490 - Plant-Specific Adoption, Revision 4 of the Improved Standard Technical Specifications

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-10

...,'' NUREG-1432, ``Standard Technical Specifications, Combustion Engineering Plants,'' NUREG-1433, ``Standard..., ``Standard Technical Specifications, Combustion Engineering Plants'' Revision 4, ADAMS Accession No..., Westinghouse Plants''.. NUREG-1432, ``Standard Technical ML12102A165 ML12102A169 Specifications, Combustion...

Standard Avionics Packaging, Mounting, and Cooling Baseline Study.

DTIC Science & Technology

1980-01-31

Lra ph spe c i F 1e s alIl s t a bi i - zat ion , cont rol , anlad di s pI a v i nf orinat i onl should4 bc ser ial1d tal . Are the sta’ ndards listed...uiremnts-Airborne Low Range Altimeter, DO-i 55 , which is the basis for the FAA Technical Standard Order (TSO), requires perform- ance in the range 0-50 fee

75 FR 57393 - Parts and Accessories Necessary for Safe Operation: Antilock Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-21

... American Trucking Associations stated that in the future, wireless transmissions of the vehicle fault... Children I. Indian Tribal Governments J. Energy Effects K. Technical Standards L. Environment I. Public... Government and Indian tribes. J. Energy Effects We have analyzed this rule under Executive Order 13211...

77 FR 50914 - Anchorage; Change to Cottonwood Island Anchorage, Columbia River, Oregon and Washington

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-23

... under Executive Order 13211. 13. Technical Standards The National Technology Transfer and Advancement... of Proposed Rulemaking A. Regulatory History and Information On June 13, 2011, the Coast Guard...'' comprises small businesses, not-for-profit organizations that are independently owned and operated and are...

14 CFR 21.607 - Quality system.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Quality system. 21.607 Section 21.607... PROCEDURES FOR PRODUCTS AND PARTS Technical Standard Order Approvals § 21.607 Quality system. Each applicant for or holder of a TSO authorization must establish a quality system that meets the requirements of...

14 CFR 21.611 - Design changes.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Design changes. 21.611 Section 21.611... PROCEDURES FOR PRODUCTS AND PARTS Technical Standard Order Authorizations § 21.611 Design changes. (a) Minor... authorization issued under this part may make minor design changes (any change other than a major change...

14 CFR 21.611 - Design changes.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Design changes. 21.611 Section 21.611... PROCEDURES FOR PRODUCTS AND PARTS Technical Standard Order Authorizations § 21.611 Design changes. (a) Minor... authorization issued under this part may make minor design changes (any change other than a major change...

Evaluation of the protective efficiency of a new oxygen mask for aircraft passenger use to 40,000 feet.

DOT National Transportation Integrated Search

1980-10-01

This report describes the methods used in the evaluation of a new continuous-flow, phase-dilution passenger oxygen mask for compliance to FAA technical Standard Order (TSO)-C64 requirements. Data presented include end expiratory partial pressures for...

14 CFR 135.154 - Terrain awareness and warning system.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Terrain awareness and warning system. 135... Aircraft and Equipment § 135.154 Terrain awareness and warning system. (a) Airplanes manufactured after... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

14 CFR 121.354 - Terrain awareness and warning system.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Terrain awareness and warning system. 121... § 121.354 Terrain awareness and warning system. (a) Airplanes manufactured after March 29, 2002. No... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

14 CFR 135.154 - Terrain awareness and warning system.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Terrain awareness and warning system. 135... Aircraft and Equipment § 135.154 Terrain awareness and warning system. (a) Airplanes manufactured after... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

14 CFR 135.154 - Terrain awareness and warning system.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Terrain awareness and warning system. 135... Aircraft and Equipment § 135.154 Terrain awareness and warning system. (a) Airplanes manufactured after... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

14 CFR 135.154 - Terrain awareness and warning system.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Terrain awareness and warning system. 135... Aircraft and Equipment § 135.154 Terrain awareness and warning system. (a) Airplanes manufactured after... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

14 CFR 121.354 - Terrain awareness and warning system.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Terrain awareness and warning system. 121... § 121.354 Terrain awareness and warning system. (a) Airplanes manufactured after March 29, 2002. No... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

14 CFR 121.354 - Terrain awareness and warning system.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 3 2014-01-01 2014-01-01 false Terrain awareness and warning system. 121... § 121.354 Terrain awareness and warning system. (a) Airplanes manufactured after March 29, 2002. No... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

14 CFR 121.354 - Terrain awareness and warning system.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 3 2012-01-01 2012-01-01 false Terrain awareness and warning system. 121... § 121.354 Terrain awareness and warning system. (a) Airplanes manufactured after March 29, 2002. No... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

14 CFR 135.154 - Terrain awareness and warning system.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Terrain awareness and warning system. 135... Aircraft and Equipment § 135.154 Terrain awareness and warning system. (a) Airplanes manufactured after... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

14 CFR 121.354 - Terrain awareness and warning system.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 3 2013-01-01 2013-01-01 false Terrain awareness and warning system. 121... § 121.354 Terrain awareness and warning system. (a) Airplanes manufactured after March 29, 2002. No... awareness and warning system that meets the requirements for Class A equipment in Technical Standard Order...

Report: EPA’s Contract Oversight and Controls Over Personal Computers Need Improvement

EPA Pesticide Factsheets

Report #11-P-0705, September 26, 2011. EPA paid the CTS contractor a total of $489,734 over an 11-month period for 3,343 seats—a standard seat includes a leased computer with accessories and technical support—not ordered by the Agency during the period.

76 FR 46678 - Tris carbamoyl triazine; Proposed Modification of Significant New Uses

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-03

.... During the initial review of the PMN, EPA's preliminary Ecological Structural Activity Relationship (Eco... Executive Order 12866. I. National Technology Transfer and Advancement Act In addition, since this action does not involve any technical standards, section 12(d) of the National Technology Transfer and...

77 FR 75085 - Proposed Significant New Use Rule on Ethoxylated, Propoxylated Diamine Diaryl Substituted...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

... applications. Based on ecological structure activity relationship (EcoSAR) analysis of test data on analogous... significant regulatory action under Executive Order 12866. I. National Technology Transfer and Advancement Act Since this action does not involve any technical standards, section 12(d) of the National Technology...

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program's function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned-standards integration system. The Program maintains a 'one stop-shop' Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, WIlliam W.

2003-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program s function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned - standards integration system. The Program maintains a "one stop-shop" Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

76 FR 52734 - Underwater Locating Devices (Acoustic) (Self-Powered)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-23

...This notice announces the planned revocation of all Technical Standard Order authorizations (TSOA) issued for the production of Underwater Locating Devices (Acoustic) (Self-Powered) manufactured to the TSO-C121 and TSO-C121a specifications. These actions are necessary because the planned issuance of TSO-C121b, Underwater Locating Devices (Acoustic) (Self-Powered), with a minimum performance standard (MPS) that will increase the minimum operating life of Underwater Locating Devices from 30 days to 90 days.

77 FR 13174 - Underwater Locating Devices (Acoustic) (Self-Powered)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

...This is a confirmation notice for the planned revocation of all Technical Standard Order authorizations issued for the production of Underwater Locating Devices (Acoustic) (Self-Powered) manufactured to the TSO-C121 and TSO-C121a specifications. These actions are necessary because the planned issuance of TSO-C121b, Underwater Locating Devices (Acoustic) (Self-Powered), minimum performance standard (MPS) will increase the minimum operating life of Underwater Locating Devices from 30 days to 90 days.

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2010 CFR

2010-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2011 CFR

2011-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2012 CFR

2012-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2014 CFR

2014-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2013 CFR

2013-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

A systematic literature review on security and privacy of electronic health record systems: technical perspectives.

PubMed

Rezaeibagha, Fatemeh; Win, Khin Than; Susilo, Willy

Even though many safeguards and policies for electronic health record (EHR) security have been implemented, barriers to the privacy and security protection of EHR systems persist. This article presents the results of a systematic literature review regarding frequently adopted security and privacy technical features of EHR systems. Our inclusion criteria were full articles that dealt with the security and privacy of technical implementations of EHR systems published in English in peer-reviewed journals and conference proceedings between 1998 and 2013; 55 selected studies were reviewed in detail. We analysed the review results using two International Organization for Standardization (ISO) standards (29100 and 27002) in order to consolidate the study findings. Using this process, we identified 13 features that are essential to security and privacy in EHRs. These included system and application access control, compliance with security requirements, interoperability, integration and sharing, consent and choice mechanism, policies and regulation, applicability and scalability and cryptography techniques. This review highlights the importance of technical features, including mandated access control policies and consent mechanisms, to provide patients' consent, scalability through proper architecture and frameworks, and interoperability of health information systems, to EHR security and privacy requirements.

76 FR 63714 - Technical Standard Order (TSO)-C129a, Airborne Supplemental Navigation Equipment Using the Global...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-13

..., Airborne Supplemental Navigation Equipment Using the Global Positioning System (GPS) AGENCY: Federal Aviation Administration (FAA), DOT ACTION: Notice of cancellation of TSO-C129a, Airborne Supplemental... cancellation of TSO-C129a, Airborne Supplemental Navigation Equipment Using the Global Positioning System (GPS...

Status of China's Energy Efficiency Standards and Labels for Appliances and International Collaboration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan

2008-03-01

China first adopted minimum energy performance standards (MEPS) in 1989. Today, there are standards for a wide range of domestic, commercial and selected industrial equipment. In 1999, China launched a voluntary endorsement label, which has grown to cover over 40 products including water-saving products (See Figure 1). Further, in 2005, China started a mandatory energy information label (also referred to as the 'Energy Label'). Today, the Energy Label is applied to four products including: air conditioners; household refrigerators; clothes washers; and unitary air conditioners (See Figure 2). MEPS and the voluntary endorsement labeling specifications have been updated and revised inmore » order to reflect technology improvements to those products in the market. These programs have had an important impact in reducing energy consumption of appliances in China. Indeed, China has built up a strong infrastructure to develop and implement product standards. Historically, however, the government's primary focus has been on the technical requirements for efficiency performance. Less attention has been paid to monitoring and enforcement with a minimal commitment of resources and little expansion of administrative capacity in this area. Thus, market compliance with both mandatory standards and labeling programs has been questionable and actual energy savings may have been undermined as a result. The establishment of a regularized monitoring system for tracking compliance with the mandatory standard and energy information label in China is a major area for program improvement. Over the years, the Collaborative Labeling and Appliance Standards Program (CLASP) has partnered with several Chinese institutions to promote energy-efficient products in China. CLASP, together with its implementing partner Lawrence Berkeley National Laboratory (LBNL), has assisted China in developing and updating the above-mentioned standards and labeling programs. Because of the increasing need for the development of a monitoring system to track compliance with standards and labeling, CLASP, with support from Japan's Ministry of Economy, Trade and Industry (METI), has expanded its ongoing collaboration with the China National Institute of Standards (CNIS) to include enforcement and monitoring. CNIS has already begun working on the issue of compliance. CNIS has conducted modest sample testing in 2006 for refrigerators, freezers and room air-conditioners, and repeated the same task in 2007 with a similar sample size for three products (refrigerators, freezers, air-conditioners and clothes washers). And, CNIS, with technical support from LBNL, has analyzed the data collected through testing. At the same time, parallel effort has also been paid to look at the potential impact of the label to 2020. In conjunction with CNIS, CLASP technical experts reviewed the standards development timeline of the four products currently subject to the mandatory energy information label. CLASP, with the support of METI/IEEJ, collaborated with CNIS to develop the efficiency grades, providing: technical input to the process; comment and advice on particular technical issues; as well as evaluation of the results. In addition, in order to effectively evaluate the impact of the label on China's market, CLASP further provided assistance to CNIS to collect data on both the efficiency distribution and product volume distribution of refrigerators on the market. This short report summarizes the status of Standards and Labeling program, current enforcement and monitoring mechanism in China, and states the importance of international collaborations.« less

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

Assessment and certification of neonatal incubator sensors through an inferential neural network.

PubMed

de Araújo, José Medeiros; de Menezes, José Maria Pires; Moura de Albuquerque, Alberto Alexandre; da Mota Almeida, Otacílio; Ugulino de Araújo, Fábio Meneghetti

2013-11-15

Measurement and diagnostic systems based on electronic sensors have been increasingly essential in the standardization of hospital equipment. The technical standard IEC (International Electrotechnical Commission) 60601-2-19 establishes requirements for neonatal incubators and specifies the calibration procedure and validation tests for such devices using sensors systems. This paper proposes a new procedure based on an inferential neural network to evaluate and calibrate a neonatal incubator. The proposal presents significant advantages over the standard calibration process, i.e., the number of sensors is drastically reduced, and it runs with the incubator under operation. Since the sensors used in the new calibration process are already installed in the commercial incubator, no additional hardware is necessary; and the calibration necessity can be diagnosed in real time without the presence of technical professionals in the neonatal intensive care unit (NICU). Experimental tests involving the aforementioned calibration system are carried out in a commercial incubator in order to validate the proposal.

Assessment and Certification of Neonatal Incubator Sensors through an Inferential Neural Network

PubMed Central

de Araújo Júnior, José Medeiros; de Menezes Júnior, José Maria Pires; de Albuquerque, Alberto Alexandre Moura; Almeida, Otacílio da Mota; de Araújo, Fábio Meneghetti Ugulino

2013-01-01

Measurement and diagnostic systems based on electronic sensors have been increasingly essential in the standardization of hospital equipment. The technical standard IEC (International Electrotechnical Commission) 60601-2-19 establishes requirements for neonatal incubators and specifies the calibration procedure and validation tests for such devices using sensors systems. This paper proposes a new procedure based on an inferential neural network to evaluate and calibrate a neonatal incubator. The proposal presents significant advantages over the standard calibration process, i.e., the number of sensors is drastically reduced, and it runs with the incubator under operation. Since the sensors used in the new calibration process are already installed in the commercial incubator, no additional hardware is necessary; and the calibration necessity can be diagnosed in real time without the presence of technical professionals in the neonatal intensive care unit (NICU). Experimental tests involving the aforementioned calibration system are carried out in a commercial incubator in order to validate the proposal. PMID:24248278

47 CFR 73.319 - FM multiplex subcarrier technical standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false FM multiplex subcarrier technical standards. 73... SERVICES RADIO BROADCAST SERVICES FM Broadcast Stations § 73.319 FM multiplex subcarrier technical standards. (a) The technical specifications in this Section apply to all transmissions of FM multiplex...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

76 FR 43743 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0127] Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials...

76 FR 81885 - Airworthiness Directives; Goodrich Evacuation Systems Approved Under Technical Standard Order...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-29

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2011... installed on Airbus Model A330-200 and -300 series airplanes, Model A340-200 and -300 series airplanes, and Model A340-500 and -600 series airplanes. That NPRM proposed to supersede an existing AD. That NPRM...

77 FR 19069 - Airworthiness Directives; Goodrich Evacuation Systems Approved Under Technical Standard Order...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... seal and allowed the pressure in certain slides/ rafts to fall below the minimum raft mode pressure for the unit. We are issuing this AD to prevent loss of pressure in the escape slides/rafts after an emergency evacuation, which could result in inadequate buoyancy to support the raft's passenger capacity...

78 FR 42821 - Agency Information Collection (Technical Industry Standards) Activities Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... (Technical Industry Standards) Activities Under OMB Review AGENCY: Office of Acquisition and Logistics... Affairs Acquisition Regulation (VAAR) Provision 852.211-72 (formerly 852.211-75), Technical Industry.... Abstract: VAAR provision 852.211-72, Technical Industry Standards, requires items offered for sale to VA...

76 FR 60029 - Notice of Issuance Technical Bulletin 2011-2, Extended Deferral of the Effective Date of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Notice of Issuance Technical Bulletin 2011-2, Extended Deferral of the Effective Date of Technical Bulletin 2006-1 AGENCY: Federal Accounting Standards Advisory... hereby given that the Federal Accounting Standards Advisory Board (FASAB) has issued Technical Bulletin...

TECHNICAL BASIS FOR A CANDIDATE BUILDING MATERIALS RADIUM STANDARD

EPA Science Inventory

The report summarizes the technical basis for a candidate building materials radium standard. It contains the standard and a summary of the technical basis for the standard. (NOTE: The Florida Radon Research Program (FRRP), sponsored by the Environmental Protection Agency and the...

Design and quality standards for custom hybrid microcircuits

NASA Technical Reports Server (NTRS)

Allen, R. V.

1977-01-01

A hybrid microcircuit standard was developed after a thorough review of applicable NASA, military, industry, and technical society specifications and standards and compilation of comments from technical reviewers throughout the hybrid industry. The draft of the standard submitted to the technical reviewers, the comments from the reviewers, and the completed standard are discussed.

Sensor Open System Architecture (SOSA) evolution for collaborative standards development

NASA Astrophysics Data System (ADS)

Collier, Charles Patrick; Lipkin, Ilya; Davidson, Steven A.; Baldwin, Rusty; Orlovsky, Michael C.; Ibrahim, Tim

2017-04-01

The Sensor Open System Architecture (SOSA) is a C4ISR-focused technical and economic collaborative effort between the Air Force, Navy, Army, the Department of Defense (DoD), Industry, and other Governmental agencies to develop (and incorporate) a technical Open Systems Architecture standard in order to maximize C4ISR sub-system, system, and platform affordability, re-configurability, and hardware/software/firmware re-use. The SOSA effort will effectively create an operational and technical framework for the integration of disparate payloads into C4ISR systems; with a focus on the development of a modular decomposition (defining functions and behaviors) and associated key interfaces (physical and logical) for common multi-purpose architecture for radar, EO/IR, SIGINT, EW, and Communications. SOSA addresses hardware, software, and mechanical/electrical interfaces. The modular decomposition will produce a set of re-useable components, interfaces, and sub-systems that engender reusable capabilities. This, in effect, creates a realistic and affordable ecosystem enabling mission effectiveness through systematic re-use of all available re-composed hardware, software, and electrical/mechanical base components and interfaces. To this end, SOSA will leverage existing standards as much as possible and evolve the SOSA architecture through modification, reuse, and enhancements to achieve C4ISR goals. This paper will present accomplishments over the first year of SOSA initiative.

75 FR 13209 - Proposed Information Collection (Technical Industry Standards) Activity: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

... (Technical Industry Standards) Activity: Comment Request AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires items offered for...

1996 DOE technical standards program workshop: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-07-01

The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOEmore » representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.« less

Setting Performance Standards for Technical and Nontechnical Competence in General Surgery.

PubMed

Szasz, Peter; Bonrath, Esther M; Louridas, Marisa; Fecso, Andras B; Howe, Brett; Fehr, Adam; Ott, Michael; Mack, Lloyd A; Harris, Kenneth A; Grantcharov, Teodor P

2017-07-01

The objectives of this study were to (1) create a technical and nontechnical performance standard for the laparoscopic cholecystectomy, (2) assess the classification accuracy and (3) credibility of these standards, (4) determine a trainees' ability to meet both standards concurrently, and (5) delineate factors that predict standard acquisition. Scores on performance assessments are difficult to interpret in the absence of established standards. Trained raters observed General Surgery residents performing laparoscopic cholecystectomies using the Objective Structured Assessment of Technical Skill (OSATS) and the Objective Structured Assessment of Non-Technical Skills (OSANTS) instruments, while as also providing a global competent/noncompetent decision for each performance. The global decision was used to divide the trainees into 2 contrasting groups and the OSATS or OSANTS scores were graphed per group to determine the performance standard. Parametric statistics were used to determine classification accuracy and concurrent standard acquisition, receiver operator characteristic (ROC) curves were used to delineate predictive factors. Thirty-six trainees were observed 101 times. The technical standard was an OSATS of 21.04/35.00 and the nontechnical standard an OSANTS of 22.49/35.00. Applying these standards, competent/noncompetent trainees could be discriminated in 94% of technical and 95% of nontechnical performances (P < 0.001). A 21% discordance between technically and nontechnically competent trainees was identified (P < 0.001). ROC analysis demonstrated case experience and trainee level were both able to predict achieving the standards with an area under the curve (AUC) between 0.83 and 0.96 (P < 0.001). The present study presents defensible standards for technical and nontechnical performance. Such standards are imperative to implementing summative assessments into surgical training.

75 FR 28857 - Agency Information Collection (Technical Industry Standards) Activities Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-24

... (Technical Industry Standards) Activities Under OMB Review AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires that items offered...

DOE standard: The Department of Energy Laboratory Accreditation Program for radiobioassay

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-12-01

This technical standard describes the US Department of Energy Laboratory Accreditation Program (DOELAP) for Radiobioassay, for use by the US Department of Energy (DOE) and DOE Contractor radiobioassay programs. This standard is intended to be used in conjunction with the general administrative technical standard that describes the overall DOELAP accreditation process--DOE-STD-1111-98, Department of Energy Laboratory Accreditation Program Administration. This technical standard pertains to radiobioassay service laboratories that provide either direct or indirect (in vivo or in vitro) radiobioassay measurements in support of internal dosimetry programs at DOE facilities or for DOE and DOE contractors. Similar technical standards have been developedmore » for other DOELAP dosimetry programs. This program consists of providing an accreditation to DOE radiobioassay programs based on successful completion of a performance-testing process and an on-site evaluation by technical experts. This standard describes the technical requirements and processes specific to the DOELAP Radiobioassay Accreditation Program as required by 10 CFR 835 and as specified generically in DOE-STD-1111-98.« less

FCAT Retakes: Trends in Multiple Attempts at Satisfying FCAT Graduation Requirements. Research Brief. Volume 0805

ERIC Educational Resources Information Center

Froman, Terry; Brown, Shelly

2009-01-01

According to Florida Law, students must pass the Grade 10 FCAT, among other academic requirements, in order to receive a standard high school diploma. Specifically, students must achieve a "passing" score of 300 or above on both the FCAT SSS Reading and the FCAT SSS Mathematics tests. Technically, students can retake the FCAT as many…

Assessment of English Language Learners in the Era of New Academic Content Standards

ERIC Educational Resources Information Center

Bailey, Alison L.; Carroll, Patricia E.

2015-01-01

The purpose of this chapter is twofold: (1) to provide a detailed review of current language assessment policies and practices with English language learner (ELL) students under the federal requirements of the No Child Left Behind Act (NCLB; 2001) and relevant research in order to evaluate their technical quality and validity, and (2) to examine…

Evaluation of DoD Biological Safety and Security Implementation

DTIC Science & Technology

2016-04-27

biosecurity policy and directives, plans, orders, and guidance across DoD Component laboratories that were conducting research using biological select ...taken, • ensure that all BSAT laboratories are inspected regularly according to a standardized set of criteria , • coordinate external technical and...Biological Select Agent and Toxins laboratory inspections. Management Comments and Our Response The Under Secretary of Defense for Acquisition

From ergonomics to design specifications: contributions to the design of a processing machine in a tire company.

PubMed

Moraes, A S P; Arezes, P M; Vasconcelos, R

2012-01-01

The development of ergonomics' recommendations, guidelines and standards are attempts to promote the integration of ergonomics into industrial contexts. Such developments result from several sources and professionals and represent the effort that has been done to develop healthier and safer work environments. However, the availability of large amount of data and documents regarding ergonomics does not guarantee their applicability. The main goal of this paper is to use a specific case to demonstrate how ergonomics criteria were developed in order to contribute to the design of workplaces. Based on the obtained results from research undertaken in a tire company, it was observed that the ergonomics criteria should be presented as design specifications in order to be used by engineers and designers. In conclusion, it is observed that the multiple constraint environment impeded the appliance of the ergonomics criteria. It was also observed that the knowledge on technical design and the acquaintance with ergonomic standards, the level of integration in the design team, and the ability to communicate with workers and other technical staff have paramount importance in integrating ergonomics criteria into the design process.

Special Issue of Solid-State Electronics, dedicated to EUROSOI-ULIS 2016

NASA Astrophysics Data System (ADS)

Sverdlov, Viktor; Selberherr, Siegfried

2017-02-01

The current special issue of Solid-State Electronics includes 29 extended papers presented at the 2016 Second Joint International EUROSOI Workshop and International Conference on Ultimate Integration on Silicon (EUROSOI-ULIS 2016) held in Wien, Austria, on January 25-27, 2016. The papers entering to the special issue have been selected by the EUROSOI-ULIS 2016 Technical Program Committee based on the excellence of abstracts submitted and presentations delivered at the conference. In order to comply with the high standards of Solid-State Electronics the manuscripts went through the standard reviewing procedure.

A Multi-Center Space Data System Prototype Based on CCSDS Standards

NASA Technical Reports Server (NTRS)

Rich, Thomas M.

2016-01-01

Deep space missions beyond earth orbit will require new methods of data communications in order to compensate for increasing RF propagation delay. The Consultative Committee for Space Data Systems (CCSDS) standard protocols Spacecraft Monitor & Control (SM&C), Asynchronous Message Service (AMS), and Delay/Disruption Tolerant Networking (DTN) provide such a method. The maturity level of this protocol set is, however, insufficient for mission inclusion at this time. This prototype is intended to provide experience which will raise the Technical Readiness Level (TRL) of these protocols..

The problem of epistemic jurisdiction in global governance: The case of sustainability standards for biofuels.

PubMed

Winickoff, David E; Mondou, Matthieu

2017-02-01

While there is ample scholarly work on regulatory science within the state, or single-sited global institutions, there is less on its operation within complex modes of global governance that are decentered, overlapping, multi-sectorial and multi-leveled. Using a co-productionist framework, this study identifies 'epistemic jurisdiction' - the power to produce or warrant technical knowledge for a given political community, topical arena or geographical territory - as a central problem for regulatory science in complex governance. We explore these dynamics in the arena of global sustainability standards for biofuels. We select three institutional fora as sites of inquiry: the European Union's Renewable Energy Directive, the Roundtable on Sustainable Biomaterials, and the International Organization for Standardization. These cases allow us to analyze how the co-production of sustainability science responds to problems of epistemic jurisdiction in the global regulatory order. First, different problems of epistemic jurisdiction beset different standard-setting bodies, and these problems shape both the content of regulatory science and the procedures designed to make it authoritative. Second, in order to produce global regulatory science, technical bodies must manage an array of conflicting imperatives - including scientific virtue, due process and the need to recruit adoptees to perpetuate the standard. At different levels of governance, standard drafters struggle to balance loyalties to country, to company or constituency and to the larger project of internationalization. Confronted with these sometimes conflicting pressures, actors across the standards system quite self-consciously maneuver to build or retain authority for their forum through a combination of scientific adjustment and political negotiation. Third, the evidentiary demands of regulatory science in global administrative spaces are deeply affected by 1) a market for standards, in which firms and states can choose the cheapest sustainability certification, and 2) the international trade regime, in which the long shadow of WTO law exerts a powerful disciplining function.

78 FR 24061 - Minimum Technical Standards for Class II Gaming Systems and Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

... Register that established technical standards for ensuring the integrity of electronic Class II games and aids. 73 FR 60508, Oct. 10, 2008. The technical standards were designed to assist tribal gaming... Class II gaming systems. The standards did not classify which games were Class II games and which games...

42 CFR 493.1413 - Standard; Technical consultant responsibilities.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 5 2011-10-01 2011-10-01 false Standard; Technical consultant responsibilities. 493.1413 Section 493.1413 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH... Nonwaived Testing Laboratories Performing Moderate Complexity Testing § 493.1413 Standard; Technical...

7 CFR 653.4 - Availability of technical standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Availability of technical standards. 653.4 Section 653.4 Agriculture Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.4 Availability of...

PIAAC Technical Standards and Guidelines

ERIC Educational Resources Information Center

OECD Publishing, 2014

2014-01-01

The Programme for International Assessment of Adult Competencies (PIAAC) will establish technical standards and guidelines to ensure that the survey design and implementation processes of PIAAC yield high-quality and internationally comparable data. This document provides a revised version of the technical standards and guidelines originally…

Achieving mask order processing automation, interoperability and standardization based on P10

NASA Astrophysics Data System (ADS)

Rodriguez, B.; Filies, O.; Sadran, D.; Tissier, Michel; Albin, D.; Stavroulakis, S.; Voyiatzis, E.

2007-02-01

Last year the MUSCLE (Masks through User's Supply Chain: Leadership by Excellence) project was presented. Here is the project advancement. A key process in mask supply chain management is the exchange of technical information for ordering masks. This process is large, complex, company specific and error prone, and leads to longer cycle times and higher costs due to missing or wrong inputs. Its automation and standardization could produce significant benefits. We need to agree on the standard for mandatory and optional parameters, and also a common way to describe parameters when ordering. A system was created to improve the performance in terms of Key Performance Indicators (KPIs) such as cycle time and cost of production. This tool allows us to evaluate and measure the effect of factors, as well as the effect of implementing the improvements of the complete project. Next, a benchmark study and a gap analysis were performed. These studies show the feasibility of standardization, as there is a large overlap in requirements. We see that the SEMI P10 standard needs enhancements. A format supporting the standard is required, and XML offers the ability to describe P10 in a flexible way. Beyond using XML for P10, the semantics of the mask order should also be addressed. A system design and requirements for a reference implementation for a P10 based management system are presented, covering a mechanism for the evolution and for version management and a design for P10 editing and data validation.

45 CFR 162.1102 - Standards for health care claims or equivalent encounter information transaction.

Code of Federal Regulations, 2014 CFR

2014-10-01

....) (ii) Dental health care claims. The ASC X12 Standards for Electronic Data Interchange Technical Report... Care Claim: Dental (837) ASC X12 Standards for Electronic Date Interchange Technical Report Type 3... care claims. The ASC X12 Standards for Electronic Data Interchange Technical Report Type 3—Health Care...

Technical Support Document for Version 3.6.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2009-09-29

This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

Standardization in synthetic biology: an engineering discipline coming of age.

PubMed

Decoene, Thomas; De Paepe, Brecht; Maertens, Jo; Coussement, Pieter; Peters, Gert; De Maeseneire, Sofie L; De Mey, Marjan

2018-08-01

Leaping DNA read-and-write technologies, and extensive automation and miniaturization are radically transforming the field of biological experimentation by providing the tools that enable the cost-effective high-throughput required to address the enormous complexity of biological systems. However, standardization of the synthetic biology workflow has not kept abreast with dwindling technical and resource constraints, leading, for example, to the collection of multi-level and multi-omics large data sets that end up disconnected or remain under- or even unexploited. In this contribution, we critically evaluate the various efforts, and the (limited) success thereof, in order to introduce standards for defining, designing, assembling, characterizing, and sharing synthetic biology parts. The causes for this success or the lack thereof, as well as possible solutions to overcome these, are discussed. Akin to other engineering disciplines, extensive standardization will undoubtedly speed-up and reduce the cost of bioprocess development. In this respect, further implementation of synthetic biology standards will be crucial for the field in order to redeem its promise, i.e. to enable predictable forward engineering.

75 FR 35021 - Reliability Standards Development and NERC and Regional Entity Enforcement; Notice of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... Standards Development and NERC and Regional Entity Enforcement; Notice of Technical Conference June 15, 2010... Technical Conference to address industry perspectives on certain issues pertaining to the development and... Electric Reliability Organization's (ERO) standards development process; communication and interactions...

77 FR 37734 - Technical Standard Order (TSO) C-122a, Equipment That Prevent Blocked Channels Used in Two-Way...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-22

... address, weekdays except federal holidays, between 8:30 a.m. and 4:30 p.m. The Director, Aircraft Certification Service, will consider all comments received on or before the closing date. Background In 1984... obsolescence of TSO-C122a equipment and the lack of industry interest in new TSO-C122a product designs. We...

7 CFR 1728.50 - Removal of an item from listing or technical acceptance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... equipment will be notified in writing of a proposal to remove such item from the listing or technical... unanimous, the item will be referred to Technical Standards Committee “B.” Written notice of Technical...” decision, a sponsor may appeal in writing to Technical Standards Committee “B” to review Committee “A's...

7 CFR 1728.30 - Inclusion of an item for listing or technical acceptance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... be referred to Technical Standards Committee “B.” Written notice of Technical Standards Committee “A... 7 Agriculture 11 2010-01-01 2010-01-01 false Inclusion of an item for listing or technical... AND CONSTRUCTION § 1728.30 Inclusion of an item for listing or technical acceptance. (a) Scope. RUS...

Identifying Needed Technical Standards: The LITA TESLA Committee at Work.

ERIC Educational Resources Information Center

Carter, Ruth C.

1984-01-01

Efforts of the Technical Standards for Library Automation Committee (TESLA), a division-wide committee of the Library Information and Technology Association (LITA) of the American Library Association, are described. The current status of suggested technical standards and recommended action are detailed. Five sources are given. (Author/EJS)

42 CFR 493.1411 - Standard; Technical consultant qualifications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... training or experience to provide technical consultation for each of the specialties and subspecialties of... responsible. Note: The technical consultant requirements for “laboratory training or experience, or both” in... 42 Public Health 5 2010-10-01 2010-10-01 false Standard; Technical consultant qualifications. 493...

7 CFR 652.4 - Technical service standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... technologies and practices. (c) A technical service provider must assume responsibility in writing for the... 7 Agriculture 6 2010-01-01 2010-01-01 false Technical service standards. 652.4 Section 652.4..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.4...

EVA tools and equipment reference book

NASA Technical Reports Server (NTRS)

Fullerton, R. K.

1993-01-01

This document contains a mixture of tools and equipment used throughout the space shuttle-based extravehicular activity (EVA) program. Promising items which have reached the prototype stage of development are also included, but should not be considered certified ready for flight. Each item is described with a photo, a written discussion, technical specifications, dimensional drawings, and points of contact for additional information. Numbers on the upper left-hand corner of each photo may be used to order specific pictures from NASA and contractor photo libraries. Points of contact were classified as either operational or technical. An operational contact is an engineer from JSC Mission Operations Directorate who is familiar with the basic function and on-orbit use of the tool. A technical contact would be the best source of detailed technical specifications and is typically the NASA subsystem manager. The technical information table for each item uses the following terms to describe the availability or status of each hardware item: Standard - Flown on every mission as standard manifest; Flight specific - Potentially available for flight, not flown every mission (flight certification cannot be guaranteed and recertification may be required); Reference only - Item no longer in active inventory or not recommended for future use, some items may be too application-specific for general use; and Developmental - In the prototype stage only and not yet available for flight. The current availability and certification of any flight-specific tool should be verified with the technical point of contact. Those tools built and fit checked for Hubble Space Telescope maintenance are program dedicated and are not available to other customers. Other customers may have identical tools built from the existing, already certified designs as an optional service.

3.0 Tesla magnetic resonance imaging: A new standard in liver imaging?

PubMed Central

Girometti, Rossano

2015-01-01

An ever-increasing number of 3.0 Tesla (T) magnets are installed worldwide. Moving from the standard of 1.5 T to higher field strength implies a number of potential advantage and drawbacks, requiring careful optimization of imaging protocols or implementation of novel hardware components. Clinical practice and literature review suggest that state-of-the-art 3.0 T is equivalent to 1.5 T in the assessment of focal liver lesions and diffuse liver disease. Therefore, further technical improvements are needed in order to fully exploit the potential of higher field strength. PMID:26244063

3.0 Tesla magnetic resonance imaging: A new standard in liver imaging?

PubMed

Girometti, Rossano

2015-07-28

An ever-increasing number of 3.0 Tesla (T) magnets are installed worldwide. Moving from the standard of 1.5 T to higher field strength implies a number of potential advantage and drawbacks, requiring careful optimization of imaging protocols or implementation of novel hardware components. Clinical practice and literature review suggest that state-of-the-art 3.0 T is equivalent to 1.5 T in the assessment of focal liver lesions and diffuse liver disease. Therefore, further technical improvements are needed in order to fully exploit the potential of higher field strength.

78 FR 32476 - Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-426...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-30

... Standard Technical Specification (STS): NUREG-1432, ``Standard Technical Specifications Combustion..., Washington, DC 20555- 0001. SUPPLEMENTARY INFORMATION: TSTF-426, Revision 5, is applicable to all Combustion...

Systems and technologies for objective evaluation of technical skills in laparoscopic surgery.

PubMed

Sánchez-Margallo, Juan A; Sánchez-Margallo, Francisco M; Oropesa, Ignacio; Gómez, Enrique J

2014-01-01

Minimally invasive surgery is a highly demanding surgical approach regarding technical requirements for the surgeon, who must be trained in order to perform a safe surgical intervention. Traditional surgical education in minimally invasive surgery is commonly based on subjective criteria to quantify and evaluate surgical abilities, which could be potentially unsafe for the patient. Authors, surgeons and associations are increasingly demanding the development of more objective assessment tools that can accredit surgeons as technically competent. This paper describes the state of the art in objective assessment methods of surgical skills. It gives an overview on assessment systems based on structured checklists and rating scales, surgical simulators, and instrument motion analysis. As a future work, an objective and automatic assessment method of surgical skills should be standardized as a means towards proficiency-based curricula for training in laparoscopic surgery and its certification.

Normalization of hydrocarbon emissions in Germany

NASA Astrophysics Data System (ADS)

Levitin, R. E.

2018-05-01

In connection with the integration of the Russian Federation into the European space, many technical regulations and methodologies are being corrected. The work deals with the German legislation in the field of determining of hydrocarbon emissions and the methodology for determining the emissions of oil products from vertical steel tanks. In German law, the Emission Protection Act establishes only basic requirements. Mainly technical details, which have importance for practice, are regulated in numerous Orders on the Procedure for the Implementation of the Law (German abbr. - BimSchV). Documents referred to by the Technical Manual on the Maintenance of Clean Air are a step below on the hierarchical ladder of legislative and regulatory documentation. This set of documents is represented by numerous DIN standards and VDI guidelines. The article considers the methodology from the guidance document VDI 3479. The shortcomings and problems of applying the given method in Russia are shown.

The French Space Operation Act: Technical Regulations

NASA Astrophysics Data System (ADS)

Trinchero, J. P.; Lazare, B.

2010-09-01

The French Space Operation Act(FSOA) stipulates that a prime objective of the National technical regulations is to protect people, property, public health and the environment. Compliance with these technical regulations is mandatory as of 10 December 2010 for space operations by French space operators and for space operations from French territory. The space safety requirements and regulations governing procedures are based on national and international best practices and experience. A critical design review of the space system and procedures shall be carried out by the applicant, in order to verify compliance with the Technical Regulations. An independent technical assessment of the operation is delegated to CNES. The principles applied when drafting technical regulations are as follows: requirements must as far as possible establish the rules according to the objective to be obtained, rather than how it is to be achieved; requirements must give preference to international standards recognised as being the state of the art; requirements must take previous experience into account. Technical regulations are divided into three sections covering common requirements for the launch, control and return of a space object. A dedicated section will cover specific rules to be applied at the Guiana Space Centre. The main topics addressed by the technical regulations are: operator safety management system; study of risks to people, property, public health and the Earth’s environment; impact study on the outer space environment: space debris generated by the operation; planetary protection.

77 FR 41473 - Proposed Technical Standard Order (TSO)-C126b, 406 MHz Emergency Locator Transmitters (ELT) and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-13

... antenna connection to sever, rendering the ELT ineffective and severely impacting the performance of the... AAR-11-03: The antenna cable was severed from the ELT when the ELT slipped out of the hook and loop... NTSB ID WPR10FA273: The antenna cable was severed from the ELT when the ELT slipped out of the hook and...

Improving student’s technical drawing in building technology course with shared and digital enrichment material in order to support green technology

NASA Astrophysics Data System (ADS)

Wizaka, W.; Nurdiani, N.

2017-12-01

Technical drawing is a step that is absolutely necessary to be mastered by the architects in presenting their product in design development phase. The easy readiness and completeness of information in a drawing determine the quality and timeliness of a project. An incomplete engineering drawing is difficult to read by foreman or craftsman, and the risk of misunderstanding of the drawing will cost expensive and have potential risk to create many bad implications in the project. Unfortunately, the knowledge and skill of drawing technique are often not completely mastered by most students. On the other hand, according to the regional development situation in architectural and construction issue, the drawing standards must be fully utilized in international standards in order to facilitate cooperative work involving workers and engineers from these region countries. This research will be described some errors that often made by students and of international drafting symbols that supposed to be well used by students and then insert multi-media resources as digital enrichment material that supposed to be used as an additional material. The goal of this study will be to examine how multi-media is employed to positively impact student learning in a Building Technology course.

47 CFR 90.548 - Interoperability Technical Standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Specification—New Technology Standards Project—Digital Radio Technical Standards, approved March 2005. (v) ANSI/TIA-102.BAEE-B-2010, Project 25 Radio Management Protocols—New Technology Standards Project—Digital... 2003. (iii) ANSI/TIA-102.BAEA-B-2012, Project 25 Data Overview—New Technology Standards Project—Digital...

Updated standards and processes for accreditation of echocardiographic laboratories from The European Association of Cardiovascular Imaging.

PubMed

Popescu, Bogdan A; Stefanidis, Alexandros; Nihoyannopoulos, Petros; Fox, Kevin F; Ray, Simon; Cardim, Nuno; Rigo, Fausto; Badano, Luigi P; Fraser, Alan G; Pinto, Fausto; Zamorano, Jose Luis; Habib, Gilbert; Maurer, Gerald; Lancellotti, Patrizio; Andrade, Maria Joao; Donal, Erwan; Edvardsen, Thor; Varga, Albert

2014-07-01

Standards for echocardiographic laboratories were proposed by the European Association of Echocardiography (now the European Association of Cardiovascular Imaging) 7 years ago in order to raise standards of practice and improve the quality of care. Criteria and requirements were published at that time for transthoracic, transoesophageal, and stress echocardiography. This paper reassesses and updates the quality standards to take account of experience and the technical developments of modern echocardiographic practice. It also discusses quality control, the incentives for laboratories to apply for accreditation, the reaccreditation criteria, and the current status and future prospects of the laboratory accreditation process. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2014. For permissions please email: journals.permissions@oup.com.

DOE technical standards list: Directory of DOE and contractor personnel involved in non-government standards activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-08-01

The body of this document contains a listing of DOE employees and DOE contractors who have submitted form DOE F 1300.2, Record of Non-Government Standards Activity, which is attached to the end of this document and to DOE Order 1300.2A. Additional names were added from rosters supplied by non-Government standards bodies. The committees or governing bodies in which the person participates is listed after each name. An asterisk preceding the committee notation indicates that the person has identified himself or herself as the DOE representative on that committee. Appendices to this document are also provided to sort the information bymore » the parent employment organization, by non-Government standards activity, and by the proper names of the non-Government standards organizations and committees. DOE employees and contractors listed in this TSL are those recorded as of July 1, 1996.« less

25 CFR 547.13 - What are the minimum technical standards for program storage media?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are the minimum technical standards for program storage media? 547.13 Section 547.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES...

25 CFR 547.13 - What are the minimum technical standards for program storage media?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum technical standards for program storage media? 547.13 Section 547.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES...

25 CFR 547.13 - What are the minimum technical standards for program storage media?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 2 2012-04-01 2012-04-01 false What are the minimum technical standards for program storage media? 547.13 Section 547.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES...

Evaluation of Factors that Contribute to Improving Academic Achievement of Career and Technical Education Students in Rhode Island

ERIC Educational Resources Information Center

Marsella, Anthony J.

2010-01-01

The primary purpose of this study was to gain a deeper understanding of career and technical education in Rhode Island utilizing Program Approval Process: Standards, Instruments, and Protocols. The process establishes standards for quality career and technical education. The population surveyed provided data on Standard Two: Curriculum and…

25 CFR 547.6 - What are the minimum technical standards for enrolling and enabling Class II gaming system...

Code of Federal Regulations, 2010 CFR

2010-04-01

... and enabling Class II gaming system components? 547.6 Section 547.6 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES § 547.6 What are the minimum technical standards for enrolling and...

45 CFR 162.1802 - Standards for coordination of benefits information transaction.

Code of Federal Regulations, 2014 CFR

2014-10-01

....) (ii) The ASC X12 Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim... X12 Standards for Electronic Date Interchange Technical Report Type 3, October 2007, ASC X12N... Interchange Technical Report Type 3—Health Care Claim: Professional (837), May 2006, ASC X12N/005010X222...

45 CFR 162.1802 - Standards for coordination of benefits information transaction.

Code of Federal Regulations, 2010 CFR

2010-10-01

....) (ii) The ASC X12 Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim... X12 Standards for Electronic Date Interchange Technical Report Type 3, October 2007, ASC X12N... Interchange Technical Report Type 3—Health Care Claim: Professional (837), May 2006, ASC X12N/005010X222...

New Mexico Standards Based Assessment (NMSBA) Technical Report: 2006 Spring Administration

ERIC Educational Resources Information Center

Griph, Gerald W.

2006-01-01

The purpose of the NMSBA technical report is to provide users and other interested parties with a general overview of and technical characteristics of the 2006 NMSBA. The 2006 technical report contains the following information: (1) Test development; (2) Scoring procedures; (3) Calibration, scaling, and equating procedures; (4) Standard setting;…

A Revision of Technical Mathematics Based on the NCTM Standards. Final Report.

ERIC Educational Resources Information Center

Near, Barbara

Between 1993 and 1996, Henry Ford Community College (Michigan) worked with business, industry, and technical instructors to revise their Technical Mathematics program in accordance with the National Council of Teachers of Mathematics (NCTM) Standards. The purpose of the project was to restructure the technical math curriculum and create a context…

77 FR 39623 - Airworthiness Standards: Aircraft Engines; Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-05

...] Airworthiness Standards: Aircraft Engines; Technical Amendment AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; technical amendment. SUMMARY: This amendment clarifies aircraft engine... from applicants requesting FAA engine type certifications and aftermarket certifications, such as...

International development of methods of analysis for the presence of products of modern biotechnology.

PubMed

Cantrill, Richard C

2008-01-01

Methods of analysis for products of modern biotechnology are required for national and international trade in seeds, grain and food in order to meet the labeling or import/export requirements of different nations and trading blocks. Although many methods were developed by the originators of transgenic events, governments, universities, and testing laboratories, trade is less complicated if there exists a set of international consensus-derived analytical standards. In any analytical situation, multiple methods may exist for testing for the same analyte. These methods may be supported by regional preferences and regulatory requirements. However, tests need to be sensitive enough to determine low levels of these traits in commodity grain for regulatory purposes and also to indicate purity of seeds containing these traits. The International Organization for Standardization (ISO) and its European counterpart have worked to produce a suite of standards through open, balanced and consensus-driven processes. Presently, these standards are approaching the time for their first review. In fact, ISO 21572, the "protein standard" has already been circulated for systematic review. In order to expedite the review and revision of the nucleic acid standards an ISO Technical Specification (ISO/TS 21098) was drafted to set the criteria for the inclusion of precision data from collaborative studies into the annexes of these standards.

The SIM Time Network

PubMed Central

Lombardi, Michael A.; Novick, Andrew N.; Lopez R, J. Mauricio; Jimenez, Francisco; de Carlos Lopez, Eduardo; Boulanger, Jean-Simon; Pelletier, Raymond; de Carvalho, Ricardo J.; Solis, Raul; Sanchez, Harold; Quevedo, Carlos Andres; Pascoe, Gregory; Perez, Daniel; Bances, Eduardo; Trigo, Leonardo; Masi, Victor; Postigo, Henry; Questelles, Anthony; Gittens, Anselm

2011-01-01

The Sistema Interamericano de Metrologia (SIM) is a regional metrology organization (RMO) whose members are the national metrology institutes (NMIs) located in the 34 nations of the Organization of American States (OAS). The SIM/OAS region extends throughout North, Central, and South America and the Caribbean Islands. About half of the SIM NMIs maintain national standards of time and frequency and must participate in international comparisons in order to establish metrological traceability to the International System (SI) of units. The SIM time network (SIMTN) was developed as a practical, cost effective, and technically sound way to automate these comparisons. The SIMTN continuously compares the time standards of SIM NMIs and produces measurement results in near real-time by utilizing the Internet and the Global Positioning System (GPS). Fifteen SIM NMIs have joined the network as of December 2010. This paper provides a brief overview of SIM and a technical description of the SIMTN. It presents international comparison results and examines the measurement uncertainties. It also discusses the metrological benefits that the network provides to its participants. PMID:26989584

The SIM Time Network.

PubMed

Lombardi, Michael A; Novick, Andrew N; Lopez R, J Mauricio; Jimenez, Francisco; de Carlos Lopez, Eduardo; Boulanger, Jean-Simon; Pelletier, Raymond; de Carvalho, Ricardo J; Solis, Raul; Sanchez, Harold; Quevedo, Carlos Andres; Pascoe, Gregory; Perez, Daniel; Bances, Eduardo; Trigo, Leonardo; Masi, Victor; Postigo, Henry; Questelles, Anthony; Gittens, Anselm

2011-01-01

The Sistema Interamericano de Metrologia (SIM) is a regional metrology organization (RMO) whose members are the national metrology institutes (NMIs) located in the 34 nations of the Organization of American States (OAS). The SIM/OAS region extends throughout North, Central, and South America and the Caribbean Islands. About half of the SIM NMIs maintain national standards of time and frequency and must participate in international comparisons in order to establish metrological traceability to the International System (SI) of units. The SIM time network (SIMTN) was developed as a practical, cost effective, and technically sound way to automate these comparisons. The SIMTN continuously compares the time standards of SIM NMIs and produces measurement results in near real-time by utilizing the Internet and the Global Positioning System (GPS). Fifteen SIM NMIs have joined the network as of December 2010. This paper provides a brief overview of SIM and a technical description of the SIMTN. It presents international comparison results and examines the measurement uncertainties. It also discusses the metrological benefits that the network provides to its participants.

Data development technical support document for the aircraft crash risk analysis methodology (ACRAM) standard

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kimura, C.Y.; Glaser, R.E.; Mensing, R.W.

1996-08-01

The Aircraft Crash Risk Analysis Methodology (ACRAM) Panel has been formed by the US Department of Energy Office of Defense Programs (DOE/DP) for the purpose of developing a standard methodology for determining the risk from aircraft crashes onto DOE ground facilities. In order to accomplish this goal, the ACRAM panel has been divided into four teams, the data development team, the model evaluation team, the structural analysis team, and the consequence team. Each team, consisting of at least one member of the ACRAM plus additional DOE and DOE contractor personnel, specializes in the development of the methodology assigned to thatmore » team. This report documents the work performed by the data development team and provides the technical basis for the data used by the ACRAM Standard for determining the aircraft crash frequency. This report should be used to provide the generic data needed to calculate the aircraft crash frequency into the facility under consideration as part of the process for determining the aircraft crash risk to ground facilities as given by the DOE Standard Aircraft Crash Risk Assessment Methodology (ACRAM). Some broad guidance is presented on how to obtain the needed site-specific and facility specific data but this data is not provided by this document.« less

Crew Transportation Technical Standards and Design Evaluation Criteria

NASA Technical Reports Server (NTRS)

Lueders, Kathryn L.; Thomas, Rayelle E. (Compiler)

2015-01-01

Crew Transportation Technical Standards and Design Evaluation Criteria contains descriptions of technical, safety, and crew health medical processes and specifications, and the criteria which will be used to evaluate the acceptability of the Commercial Providers' proposed processes and specifications.

Improving automation standards via semantic modelling: Application to ISA88.

PubMed

Dombayci, Canan; Farreres, Javier; Rodríguez, Horacio; Espuña, Antonio; Graells, Moisès

2017-03-01

Standardization is essential for automation. Extensibility, scalability, and reusability are important features for automation software that rely in the efficient modelling of the addressed systems. The work presented here is from the ongoing development of a methodology for semi-automatic ontology construction methodology from technical documents. The main aim of this work is to systematically check the consistency of technical documents and support the improvement of technical document consistency. The formalization of conceptual models and the subsequent writing of technical standards are simultaneously analyzed, and guidelines proposed for application to future technical standards. Three paradigms are discussed for the development of domain ontologies from technical documents, starting from the current state of the art, continuing with the intermediate method presented and used in this paper, and ending with the suggested paradigm for the future. The ISA88 Standard is taken as a representative case study. Linguistic techniques from the semi-automatic ontology construction methodology is applied to the ISA88 Standard and different modelling and standardization aspects that are worth sharing with the automation community is addressed. This study discusses different paradigms for developing and sharing conceptual models for the subsequent development of automation software, along with presenting the systematic consistency checking method. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

The Technical Quality of Delivered Care for People with Inflammatory Bowel Disease in Tabriz Gastroenterology Clinics.

PubMed

Tabrizi, Jafar Sadegh; Somi, Mohammad Hossein; Asghari, Sima; Asghari Jafarabadi, Mohammad; Gharibi, Farid; Alidoost, Saeideh

2015-01-01

The Inflammatory Bowel Disease (IBD) is considered as one of the chronic diseasesre-quiring complicated treatment. This study aimed to assess technical quality of providing care for pa-tients with IBD. This cross-sectional study was conducted on 94 people with IBD using interviews and simple random sampling methods in Gastroenterology, Endoscopy and clinic of Imam Reza Hospital and Golgasht Clinic in Tabriz in 2012. The data collection tool was a researcher-designed questionnaire whose validity and reliability had been confirmed. In order to investigate the statistical relationship between the background variables and compliance with the standards the Chi-square test was applied using SPSS 17 Software. "visit by the physician" and "diet advice by the dietitian" have had the highest and the lowest levels of compliance with the standard respectively, and "the care related to the disease exacerbation" and "the care provided by the other physicians" were not compatible with the standards in 80% of the cases. Data analyses also showed that there was a significant relationship between participant's age, job, education and the smoking status and compliance of some care with the relevant standards (P<0.05). The results indicate a substantial gap between provided care for the people with IBD and the relevant standards. This indicates the areas that need of improvement and requires the serious attention of the authorities.

"State of the Art" of technical protection measures in Austria and the effectiveness documented during bedload and debris flow events

NASA Astrophysics Data System (ADS)

Moser, Markus; Mehlhorn, Susanne; Rudolf-Miklau, Florian; Suda, Jürgen

2017-04-01

Since the beginning of systematic torrent control in Austria 130 years ago, barriers are constructed for protection purposes. Until the end of the 1960s, solid barriers were built at the exits of depositional areas to prevent dangerous debris flows from reaching high consequence areas. The development of solid barriers with large slots or slits to regulate sediment transport began with the use of reinforced concrete during the 1970s (Rudolf-Miklau, Suda 2011). In order to dissipate the energy of debris flows debris flow breakers have been designed since the 1980s. By slowing and depositing the surge front of the debris flow, downstream reaches of the stream channel and settlement areas should be exposed to considerably lower dynamic impact. In the past, the technological development of these constructions was only steered by the experiences of the engineering practice while an institutionalized process of standardization comparable to other engineering branches was not existent. In future all structures have to be designed and dimensioned according to the EUROCODE standards. This was the reason to establish an interdisciplinary working group (ON-K 256) at the Austrian Standards Institute (ASI), which has managed to developed comprehensive new technical standards for torrent control engineering, including load models, design, dimensioning and life cycle assessment of torrent control works (technical standard ONR 24800 - series). Extreme torrential events comprise four definable displacement processes floods; fluvial solid transport; hyper-concentrated solid transport (debris floods) and debris flow (stony debris flow or mud-earth flow). As a rule, the design of the torrential barriers has to follow its function (Kettl, 1984). Modern protection concepts in torrent control are scenario-oriented and try to optimize different functions in a chain of protections structures (function chain). More or less the first step for the designing the optimal construction type is the definition of the displacement processes for each torrent section. The criteria for each process are defined in the technical standard ONR 24800 - series in Austria. According to ONR 24800 the functions of torrential barriers can be divided in process control functional types (retention; dosing and filtering; energy dissipation). The last step is the designing of the construction type. Bedload and debris events in Austria showed the functionality of the barriers. On the basis of these findings and results, some recommendations were derived to improve the function fulfilment of the technical protection measures.

47 CFR 95.637 - Modulation standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... amplitude modulation and frequency or phase modulation of a transmitter are not permitted. (d) When emission... 47 Telecommunication 5 2010-10-01 2010-10-01 false Modulation standards. 95.637 Section 95.637... SERVICES Technical Regulations Technical Standards § 95.637 Modulation standards. (a) A GMRS transmitter...

25 CFR 10.7 - Where do I find help or receive technical assistance in complying with the policies and standards?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Where do I find help or receive technical assistance in complying with the policies and standards? 10.7 Section 10.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF... help or receive technical assistance in complying with the policies and standards? The BIA has a...

25 CFR 10.7 - Where do I find help or receive technical assistance in complying with the policies and standards?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false Where do I find help or receive technical assistance in complying with the policies and standards? 10.7 Section 10.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF... help or receive technical assistance in complying with the policies and standards? The BIA has a...

Vocational and Technical Education Performance Standards and Competencies.

ERIC Educational Resources Information Center

Connecticut State Board of Education, Hartford.

These Connecticut vocational and technical performance standards and competencies are a guide for overall quality attainment in these seven vocational and technical program areas: agricultural science technology education; business and finance technology education; cooperative work education; family and consumer sciences education; marketing…

Dependability of technical items: Problems of standardization

NASA Astrophysics Data System (ADS)

Fedotova, G. A.; Voropai, N. I.; Kovalev, G. F.

2016-12-01

This paper is concerned with problems blown up in the development of a new version of the Interstate Standard GOST 27.002 "Industrial product dependability. Terms and definitions". This Standard covers a wide range of technical items and is used in numerous regulations, specifications, standard and technical documentation. A currently available State Standard GOST 27.002-89 was introduced in 1990. Its development involved a participation of scientists and experts from different technical areas, its draft was debated in different audiences and constantly refined, so it was a high quality document. However, after 25 years of its application it's become necessary to develop a new version of the Standard that would reflect the current understanding of industrial dependability, accounting for the changes taking place in Russia in the production, management and development of various technical systems and facilities. The development of a new version of the Standard makes it possible to generalize on a terminological level the knowledge and experience in the area of reliability of technical items, accumulated over a quarter of the century in different industries and reliability research schools, to account for domestic and foreign experience of standardization. Working on the new version of the Standard, we have faced a number of issues and problems on harmonization with the International Standard IEC 60500-192, caused first of all by different approaches to the use of terms and differences in the mentalities of experts from different countries. The paper focuses on the problems related to the chapter "Maintenance, restoration and repair", which caused difficulties for the developers to harmonize term definitions both with experts and the International Standard, which is mainly related to differences between the Russian concept and practice of maintenance and repair and foreign ones.

76 FR 29333 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials... for natural gas pipelines and for hazardous liquid pipelines. Both committees were established under...

A data envelope analysis to assess factors affecting technical and economic efficiency of individual broiler breeder hens.

PubMed

Romero, L F; Zuidhof, M J; Jeffrey, S R; Naeima, A; Renema, R A; Robinson, F E

2010-08-01

This study evaluated the effect of feed allocation and energetic efficiency on technical and economic efficiency of broiler breeder hens using the data envelope analysis methodology and quantified the effect of variables affecting technical efficiency. A total of 288 Ross 708 pullets were placed in individual cages at 16 wk of age and assigned to 1 of 4 feed allocation groups. Three of them had feed allocated on a group basis with divergent BW targets: standard, high (standard x 1.1), and low (standard x 0.9). The fourth group had feed allocated on an individual bird basis following the standard BW target. Birds were classified in 3 energetic efficiency categories: low, average, and high, based on estimated maintenance requirements. Technical efficiency considered saleable chicks as output and cumulative ME intake and time as inputs. Economic efficiency of feed allocation treatments was analyzed under different cost scenarios. Birds with low feed allocation exhibited a lower technical efficiency (69.4%) than standard (72.1%), which reflected a reduced egg production rate. Feed allocation of the high treatment could have been reduced by 10% with the same chick production as the standard treatment. The low treatment exhibited reduced economic efficiency at greater capital costs, whereas high had reduced economic efficiency at greater feed costs. The average energetic efficiency hens had a lower technical efficiency in the low compared with the standard feed allocation. A 1% increment in estimated maintenance requirement changed technical efficiency by -0.23%, whereas a 1% increment in ME intake had a -0.47% effect. The negative relationship between technical efficiency and ME intake was counterbalanced by a positive correlation of ME intake and egg production. The negative relationship of technical efficiency and maintenance requirements was synergized by a negative correlation of hen maintenance and egg production. Economic efficiency methodologies are effective tools to assess the economic effect of selection and flock management programs because biological, allocative, and economic factors can be independently analyzed.

Technical Support Document for Version 3.4.0 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2007-09-14

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.« less

EPA STANDARDS NETWORK FACT SHEET: ISO 14000: INTERNATIONAL ENVIRONMENTAL MANAGEMENT STANDARDS

EPA Science Inventory

This flyer provides an overview of the ISO 14000 series of International standards, supplying a brief history, structure of the Technical Committee (TC) 207, structure of the U.S. Technical Advisory Group (TAG) to ISO TC-207, status of the Standards development as of June 1997, w...

48 CFR 2052.216-72 - Task order procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

...; (5) Technical skills required; and (6) Estimated level of effort. (b) Task order technical proposal. By the date specified in the TORFP, the contractor shall deliver to the contracting officer a written or verbal (as specified in the TORFP technical proposal submittal instructions) technical proposal...

77 FR 27814 - Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-11

... NUCLEAR REGULATORY COMMISSION [Project No. 753; NRC-2012-0019] Model Safety Evaluation for Plant... Regulatory Commission (NRC) is announcing the availability of the model safety evaluation (SE) for plant... the Improved Standard Technical Specification (ISTS), NUREG-1431, ``Standard Technical Specifications...

GC-C-IRMS in routine doping control practice: 3 years of drug testing data, quality control and evolution of the method.

PubMed

Polet, Michael; Van Eenoo, Peter

2015-06-01

In order to detect the misuse of endogenous anabolic steroids, doping control laboratories require methods that allow differentiation between endogenous steroids and their synthetic copies. Gas chromatography combustion isotope ratio mass spectrometry (GC-C-IRMS) is capable of measuring the carbon isotope ratio of urinary steroids and this allows differentiation between both. GC-C-IRMS and its application to doping control has evolved a lot during the last decade and so have the World Anti-Doping Agency (WADA) technical documents that describe how GC-C-IRMS should be applied. Especially the WADA technical document of 2014 introduced a number of obligatory quality controls and a fixed methodology that should be used by all the doping control laboratories. This document imposed more uniform methods between the laboratories in order to decrease the interlaboratory standard deviation and acquire similar results for the analysis of the same urine samples. In this paper, 3 years of drug testing data of our GC-C-IRMS method in routine doping control practice is described, with an emphasis on the new WADA technical document and its implementation. Useful data for other doping control laboratories is presented focussing on general method setup, quality control and data collected from routine samples. The paper concentrates on how IRMS results shift or remain similar by switching to the 2014 WADA technical document and gives insight in a straightforward approach to calculate the measurement uncertainty.

Resident Training in Bariatric Surgery-A National Survey in the Netherlands.

PubMed

van Ramshorst, Gabrielle H; Kaijser, Mirjam A; Pierie, Jean-Pierre E N; van Wagensveld, Bart A

2017-11-01

Surgical procedures for morbid obesity, including laparoscopic Roux-en-Y gastric bypass (LRYGB), are considered standardized laparoscopic procedures. Our goal was to determine how bariatric surgery is trained in the Netherlands. Questionnaires were sent to lead surgeons from all 19 bariatric centers in the Netherlands. At least two residents or fellows were surveyed for each center. Dutch residents are required to collect at least 20 electronic Objective Standard Assessment of Technical Skills (OSATS) observations per year, which include the level of supervision needed for specific procedures. Centers without resident accreditation were excluded. All 19 surgeons responded (100%). Answers from respondents who worked at teaching hospitals with residency accreditation (12/19, 63%) were analyzed. The average number of trained residents or fellows was 14 (range 3-33). Preferred procedures were LRYGB (n = 10), laparoscopic gastric sleeve (LGS) resection (n = 1), or no preference (n = 1). Three groups could be discerned for the order in which procedural steps were trained: unstructured, in order of increasing difficulty, or in order of chronology. Questionnaire response was 79% (19/24) for residents and 73% (8/11) for fellows. On average, residents started training in bariatric surgery in postgraduate year (PGY) 4 (range 0-5). The median number of bariatric procedures performed was 40 for residents (range 0-148) and 220 during fellowships (range 5-306). Training in bariatric surgery differs considerably among centers. A structured program incorporating background knowledge, step-wise technical skills training, and life-long learning should enhance efficient training in bariatric teaching centers without affecting quality or patient safety.

75 FR 39244 - Reliability Standards Development and NERC and Regional Entity Enforcement; Further Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-08

... Standards Development and NERC and Regional Entity Enforcement; Further Notice Concerning Technical... convene a Commissioner-led technical conference regarding issues pertaining to the development of... Corporation and the Regional Entities as previously announced.\\1\\ \\1\\ Notice of Technical Conference, 75 FR 35...

Safety Standards Plan for Middlesex County Vocational & Technical High Schools.

ERIC Educational Resources Information Center

Sommer, Cy

This vocational education safety standards plan outlines rules and regulations adopted by the Board of Education of Middlesex County Vocational and Technical High Schools. The first of eleven chapters presents demographics and a safety organization table for Middlesex County Vocational and Technical Schools. In chapter 2, six safety program…

7 CFR 802.0 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-01-01

... requirements set forth in this part 802 describe certain specifications, tolerances, and other technical... Standards and Technology (NIST) Handbook 44, “Specifications, Tolerances, and Other Technical Requirements...), “Specifications and Tolerances for Reference Standards and Field Standard Weights and Measures,” (Handbook 105-1...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

[Organize quality assurance as in aviation; improve patient safety in Dutch hospitals].

PubMed

Haerkens, Marck H T M; Beekmann, Roland T A; van den Elzen, Guus J P; Lansbergen, Michael D I; Berlijn, Dick L

2009-01-01

Failing teamwork is a major cause of adverse events in hospitals in the Netherlands. Training team-skills can improve the safety standards in clinical heath care. An adapted version of Crew Resource Management (CRM) training is proving to be a usable format in the hospital environment. We emphasize that paying attention to the subject of safety has to start early in medical education in order to incorporate non-technical skills into the hospital culture.

Standards for contamination control

NASA Astrophysics Data System (ADS)

Borson, Eugene N.

2004-10-01

Standards are an important component of national and international trade. We depend upon standards to assure that manufactured parts will work together, wherever they are made, and that we speak the same technical language, no matter what language we speak. Understanding is important in order to know when to take exceptions to or tailor the standard to fit the job. Standards that are used in contamination control have increased in numbers over the years as more industries have had to improve their manufacturing processes to enhance reliability or yields of products. Some older standards have been revised to include new technologies, and many new standards have been developed. Some of the new standards were written for specific industries while others apply to many industries. Many government standards have been replaced with standards from nongovernmental standards organizations. This trend has been encouraged by U.S. law that requires the government to use commercial standards where possible. This paper reviews some of the more important standards for the aerospace industry, such as IEST-STD-CC1246 and ISO 14644-1, that have been published in recent years. Benefits, usage, and problems with some standards will be discussed. Some standards are referenced, and websites of some standards organizations are listed.

Technical Support Document for Version 3.9.0 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2011-09-01

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC are no longer included, but those sections remain in this document for reference purposes.« less

Technical Support Document for Version 3.9.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2012-09-01

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC and version 3.9.0 support for 2000 and 2001 IECC are no longer included, but those sections remain in this document for reference purposes.« less

75 FR 59261 - Mandatory Reliability Standards for the Bulk Power System; Supplemental Notice of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket Nos. RM06-16-010; RM06-16-011] Mandatory Reliability Standards for the Bulk Power System; Supplemental Notice of Technical Conference September 17, 2010. On August 19, 2010 the Federal Energy Regulatory Commission announced that a Technical...

75 FR 57764 - Mandatory Reliability Standards for the Bulk Power System; Supplemental Notice of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-22

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket Nos. RM06-16-010; RM06-16-011] Mandatory Reliability Standards for the Bulk Power System; Supplemental Notice of Technical Conference September 14, 2010. On August 19, 2010 the Federal Energy Regulatory Commission announced that a Technical...

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2013 CFR

2013-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2011 CFR

2011-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2012 CFR

2012-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2014 CFR

2014-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

48 CFR 252.227-7027 - Deferred ordering of technical data or computer software.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technical data or computer software. 252.227-7027 Section 252.227-7027 Federal Acquisition Regulations... data or computer software. As prescribed at 227.7103-8(b), use the following clause: Deferred Ordering of Technical Data or Computer Software (APR 1988) In addition to technical data or computer software...

Standardization of the Principal Processes in Scientific and Technical Information and Librarianship in the U.S.S.R.

ERIC Educational Resources Information Center

Haritonov, R. P.

1971-01-01

An important feature of standardization work in the Soviet Union is the preparation and establishment of State standards enabling unified systems to be introduced for documentation, classification, coding and technical and economic information, as well as standards for all kinds of information storage media. (Author/MM)

7 CFR 652.4 - Technical service standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... must approve all new technologies and innovative practices, including interim standards and specifications, prior to a TSP initiating technical services for those technologies and practices. (c) A TSP must...

Technical aids for the flexible use of the Leksell stereotactic system.

PubMed

Salcman, M; Bellis, E H; Sewchand, W; Amin, P

1989-06-01

As part of a multimodality therapy program for intracranial tumours, 105 stereotactic and implant procedures have been carried out utilizing the CT-compatible Leksell stereotactic system. In the iridium implant series, 86 catheters have been implanted for an average of 3.6 targets per patient. There have been no deaths or missed targets and only two incidential haemorrhages detected. In order to facilitate the reliability, safety and speed of multiple catheter insertion, several techniques have been developed including: (a) a standardized single-length catheter and flange system; (b) a ceramic catheter for microwave hyperthermia; (c) a mnemonic card for ease of calculation; (d) a radiation shield for nursing; (e) a stereotactic drill and surgical approaches to far lateral and posterior fossa targets. Principles for the use of these technical aids are discussed.

Testing of CMA-2000 Microwave Landing System (MLS) airborne receiver

NASA Astrophysics Data System (ADS)

Labreche, L.; Murfin, A. J.

1989-09-01

Microwave landing system (MLS) is a precision approach and landing guidance system which provides position information and various air to ground data. Position information is provided on a wide coverage sector and is determined by an azimuth angle measurement, an elevation angle measurement, and a range measurement. MLS performance standards and testing of the MLS airborne receiver is mainly governed by Technical Standard Order TSO-C104 issued by the Federal Aviation Administration. This TSO defines detailed test procedures for use in determining the required performance under standard and stressed conditions. It also imposes disciplines on software development and testing procedures. Testing performed on the CMA-2000 MLS receiver and methods used in its validation are described. A computer automated test system has been developed to test for compliance with RTCA/DO-177 Minimum Operation Performance Standards. Extensive software verification and traceability tests designed to ensure compliance with RTCA/DO-178 are outlined.

ACE: A distributed system to manage large data archives

NASA Technical Reports Server (NTRS)

Daily, Mike I.; Allen, Frank W.

1993-01-01

Competitive pressures in the oil and gas industry are requiring a much tighter integration of technical data into E and P business processes. The development of new systems to accommodate this business need must comprehend the significant numbers of large, complex data objects which the industry generates. The life cycle of the data objects is a four phase progression from data acquisition, to data processing, through data interpretation, and ending finally with data archival. In order to implement a cost effect system which provides an efficient conversion from data to information and allows effective use of this information, an organization must consider the technical data management requirements in all four phases. A set of technical issues which may differ in each phase must be addressed to insure an overall successful development strategy. The technical issues include standardized data formats and media for data acquisition, data management during processing, plus networks, applications software, and GUI's for interpretation of the processed data. Mass storage hardware and software is required to provide cost effective storage and retrieval during the latter three stages as well as long term archival. Mobil Oil Corporation's Exploration and Producing Technical Center (MEPTEC) has addressed the technical and cost issues of designing, building, and implementing an Advanced Computing Environment (ACE) to support the petroleum E and P function, which is critical to the corporation's continued success. Mobile views ACE as a cost effective solution which can give Mobile a competitive edge as well as a viable technical solution.

Illinois Occupational Skill Standards: Chemical Process Technical Operators.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

This document, which is intended for workforce preparation program providers, details the Illinois Occupational Skill Standards for programs preparing students for employment as chemical process technical operators. The document begins with a brief overview of the Illinois perspective on occupational skill standards and credentialing, the process…

10 CFR 52.137 - Contents of applications; technical information.

Code of Federal Regulations, 2012 CFR

2012-01-01

... FOR NUCLEAR POWER PLANTS Standard Design Approvals § 52.137 Contents of applications; technical... power plants similar in design and location to plants for which construction permits have previously... light-water-cooled nuclear power plants, an evaluation of the standard plant design against the Standard...

10 CFR 52.137 - Contents of applications; technical information.

Code of Federal Regulations, 2011 CFR

2011-01-01

... FOR NUCLEAR POWER PLANTS Standard Design Approvals § 52.137 Contents of applications; technical... power plants similar in design and location to plants for which construction permits have previously... light-water-cooled nuclear power plants, an evaluation of the standard plant design against the Standard...

10 CFR 52.137 - Contents of applications; technical information.

Code of Federal Regulations, 2014 CFR

2014-01-01

... FOR NUCLEAR POWER PLANTS Standard Design Approvals § 52.137 Contents of applications; technical... power plants similar in design and location to plants for which construction permits have previously... light-water-cooled nuclear power plants, an evaluation of the standard plant design against the Standard...

10 CFR 52.137 - Contents of applications; technical information.

Code of Federal Regulations, 2013 CFR

2013-01-01

... FOR NUCLEAR POWER PLANTS Standard Design Approvals § 52.137 Contents of applications; technical... power plants similar in design and location to plants for which construction permits have previously... light-water-cooled nuclear power plants, an evaluation of the standard plant design against the Standard...

Building Code Compliance and Enforcement: The Experience of SanFrancisco's Residential Energy Conservation Ordinanace and California'sBuildign Standards for New Construction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vine, E.

1990-11-01

As part of Lawrence Berkeley Laboratory's (LBL) technical assistance to the Sustainable City Project, compliance and enforcement activities related to local and state building codes for existing and new construction were evaluated in two case studies. The analysis of the City of San Francisco's Residential Energy Conservation Ordinance (RECO) showed that a limited, prescriptive energy conservation ordinance for existing residential construction can be enforced relatively easily with little administrative costs, and that compliance with such ordinances can be quite high. Compliance with the code was facilitated by extensive publicity, an informed public concerned with the cost of energy and knowledgeablemore » about energy efficiency, the threat of punishment (Order of Abatement), the use of private inspectors, and training workshops for City and private inspectors. The analysis of California's Title 24 Standards for new residential and commercial construction showed that enforcement of this type of code for many climate zones is more complex and requires extensive administrative support for education and training of inspectors, architects, engineers, and builders. Under this code, prescriptive and performance approaches for compliance are permitted, resulting in the demand for alternative methods of enforcement: technical assistance, plan review, field inspection, and computer analysis. In contrast to existing construction, building design and new materials and construction practices are of critical importance in new construction, creating a need for extensive technical assistance and extensive interaction between enforcement personnel and the building community. Compliance problems associated with building design and installation did occur in both residential and nonresidential buildings. Because statewide codes are enforced by local officials, these problems may increase over time as energy standards change and become more complex and as other standards (eg, health and safety codes) remain a higher priority. The California Energy Commission realizes that code enforcement by itself is insufficient and expects that additional educational and technical assistance efforts (eg, manuals, training programs, and toll-free telephone lines) will ameliorate these problems.« less

47 CFR 51.327 - Notice of network changes: Content of notice.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., but is not limited to, references to technical specifications, protocols, and standards regarding transmission, signaling, routing, and facility assignment as well as references to technical standards that...

47 CFR 51.327 - Notice of network changes: Content of notice.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., but is not limited to, references to technical specifications, protocols, and standards regarding transmission, signaling, routing, and facility assignment as well as references to technical standards that...

47 CFR 51.327 - Notice of network changes: Content of notice.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., but is not limited to, references to technical specifications, protocols, and standards regarding transmission, signaling, routing, and facility assignment as well as references to technical standards that...

15 CFR 1150.3 - Approved markings.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Federal Standard 595a may be obtained from the Office of Engineering and Technical Management, Chemical... Standard 595a may be obtained from the Office of Engineering and Technical Management, Chemical Technology...

15 CFR 1150.3 - Approved markings.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Federal Standard 595a may be obtained from the Office of Engineering and Technical Management, Chemical... Standard 595a may be obtained from the Office of Engineering and Technical Management, Chemical Technology...

15 CFR 1150.3 - Approved markings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Federal Standard 595a may be obtained from the Office of Engineering and Technical Management, Chemical... Standard 595a may be obtained from the Office of Engineering and Technical Management, Chemical Technology...

47 CFR 90.548 - Interoperability Technical Standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Industry Association, ANSI/TIA/EIA-102.BABA-1998. (2) Transmitters designed for data transmission shall... (see § 90.531) shall conform to the following technical standards: (1) Transmitters designed for voice...

45 CFR 162.1602 - Standards for health care electronic funds transfers (EFT) and remittance advice transaction.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Technical Report Type 3—Health Care Claim Payment/Advice (835), April 2006, ASC X12N/005010X221... for Electronic Data Interchange Technical Report Type 3, “Health Care Claim Payment/Advice (835... same transmission, the ASC X12 Standards for Electronic Data Interchange Technical Report Type 3...

45 CFR 162.1602 - Standards for health care electronic funds transfers (EFT) and remittance advice transaction.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Technical Report Type 3—Health Care Claim Payment/Advice (835), April 2006, ASC X12N/005010X221... for Electronic Data Interchange Technical Report Type 3, “Health Care Claim Payment/Advice (835... same transmission, the ASC X12 Standards for Electronic Data Interchange Technical Report Type 3...

45 CFR 162.1602 - Standards for health care electronic funds transfers (EFT) and remittance advice transaction.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Technical Report Type 3—Health Care Claim Payment/Advice (835), April 2006, ASC X12N/005010X221... for Electronic Data Interchange Technical Report Type 3, “Health Care Claim Payment/Advice (835... same transmission, the ASC X12 Standards for Electronic Data Interchange Technical Report Type 3...

What Is "Good" Technical Communication? A Comparison of the Standards of Writing and Engineering Instructors.

ERIC Educational Resources Information Center

Smith, Summer

2003-01-01

Presents the results of an empirical study comparing writing and engineering instructors' responses to students' technical writing. Indicates that the gap between engineering and writing teachers' standards for evaluating technical writing is not as wide as is generally assumed. Concludes that the differences that do emerge suggest ways that the…

Implementation Plan for Worldwide Airborne Command Post (WWABNCP) Operator Computer-Based Training (PLATO): Decision Paper.

DTIC Science & Technology

1985-10-03

Electrospace Systems, Inc. (ESI). ESI con- ducted a market search for training systems that would enhance unit level training, minimize cost-prohibitive...can be reprogrammed to simulate the UGC -129 keyboard. This keyboard is the standard keyboard used for data transmission on board the EC-135 and E-4B...with the appropriate technical order, and the functions and operation of the AN/ UGC -129 (ASR) terminals used with the AN/ASC-21 AFSATCOM system. In

Military Standard. Marking Technical Data Prepared by or for the Department of Defense

DTIC Science & Technology

1990-02-01

Regulations f. ECCN - Export Commodity Control Number g. ED - Executive Order h. FOIA - Freedom of Information Act i. IEP - International Exchange...critical are explicitly covered in the CCL, ",, the Export Commodity Control Number ( ECCN ) reference is provided. In o~ner cases where the ECCN statement...controlling mechanism is in supplement three of the EAR. 3,7 MIL-STD-1806 APPENDIX B A listing such as " ECCN 1355A" means the technology is specifically

Fire research publications, 1983

NASA Astrophysics Data System (ADS)

Jason, N. H.

1984-04-01

Approximately 130 articles are cited addressing topics in fire fighting and prevention, combustion physics, and fire related hazards. Only publications prepared by members of the Center for Fire Research (CFR), by other National Bureau of Standards (NBS) personnel for CFR, or by external laboratories under contract or grant from the CFR are cited. For documents that are available for purchase from either the Government Printing Office (GPO) or the National Technical Information Service (NTIS), the specific order number has been included in the citation.

Proceedings of the Technical Conference on the Effects of Helicopter Downwash on Free Projectiles, held at Bridgeton, Missouri, on 12-14 August 1975

DTIC Science & Technology

1975-11-01

limitations. It must conform to severe weight restrictions in order to attain hover and maneuver capability. It is a sensitive, vibrating platform...simulations had to be performed utilizing assumed data generated with standard momentum theory based on the size of the rotor and gross helicopter weight ...downwash intersects the rocket’s flight path; 8 (C) the weight of the aircraft influences the vertical downwash component almost linearly; and (d) the

76 FR 27952 - Small Business Size Standards: Professional, Scientific and Technical Services.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... Administration (SBA or Agency) proposed to increase small business size standards for 35 industries and one sub... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG07 Small Business Size Standards: Professional, Scientific and Technical Services. AGENCY: U.S. Small Business Administration. ACTION: Proposed...

75 FR 81605 - Smart Grid Interoperability Standards; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-28

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RM11-2-000] Smart Grid Interoperability Standards; Notice of Technical Conference December 21, 2010. Take notice that the Federal Energy... National Institute of Standards and Technology and included in this proceeding are ready for Commission...

Development and Application of Skill Standards for Security Practitioners

DTIC Science & Technology

2006-07-01

Development and Application of Skill Standards for Security Practitioners Henry K. Simpson Northrop Grumman Technical Services Lynn F. Fischer...and Application of Skill Standards for Security Practitioners Henry K. Simpson, Northrop Grumman Technical Services Lynn F. Fischer, Defense...described in the present report was driven by a JSTC tasking to develop skill standards for security practitioners in seven different security

INDEPENDENT TECHNICAL ASSESSMENT OF MANAGEMENT OF STORMWATER AND WASTEWATER AT THE SEPARATIONS PROCESS RESEARCH UNIT (SPRU) DISPOSITION PROJECT, NEW YORK

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abitz, R.; Jackson, D.; Eddy-Dilek, C.

2011-06-27

The U.S. Department of Energy (DOE) is currently evaluating the water management procedures at the Separations Process Research Unit (SPRU). The facility has three issues related to water management that require technical assistance: (1) due to a excessive rainfall event in October, 2010, contaminated water collected in basements of G2 and H2 buildings. As a result of this event, the contractor has had to collect and dispose of water offsite; (2) The failure of a sump pump at a KAPL outfall resulted in a Notice of Violation issued by the New York State Department of Environment and Conservation (NYSDEC) andmore » subsequent Consent Order. On-site water now requires treatment and off-site disposition; and (3) stormwater infiltration has resulted in Strontium-90 levels discharged to the storm drains that exceed NR standards. The contractor has indicated that water management at SPRU requires major staff resources (at least 50 persons). The purpose of this review is to determine if the contractor's technical approach warrants the large number of staff resources and to ensure that the technical approach is compliant and in accordance with federal, state and NR requirements.« less

47 CFR 76.1717 - Compliance with technical standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... with technical standards. Each system operator shall be prepared to show, on request by an authorized representative of the Commission or the local franchising authority, that the system does, in fact, comply with...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buttner, William; Rivkin, Carl; Burgess, Robert

The United Nations Global Technical Regulation (GTR) Number 13 (Global Technical Regulation on Hydrogen and Fuel Cell Vehicles) is the defining document regulating safety requirements in hydrogen vehicles, and in particular fuel cell electric vehicles (FCEV). GTR Number 13 has been formally implemented and will serve as the basis for the national regulatory standards for FCEV safety in North America (Canada, United States), Japan, Korea, and the European Union. The GTR defines safety requirement for these vehicles, including specifications on the allowable hydrogen levels in vehicle enclosures during in-use and post-crash conditions and on the allowable hydrogen emissions levels inmore » vehicle exhaust during certain modes of normal operation. However, in order to be incorporated into national regulations, that is, in order to be binding, methods to verify compliance to the specific requirements must exist. In a collaborative program, the Sensor Laboratories at the National Renewable Energy Laboratory in the United States and the Joint Research Centre, Institute for Energy and Transport in the Netherlands have been evaluating and developing analytical methods that can be used to verify compliance to the hydrogen release requirement as specified in the GTR.« less

Techno-Economic Analysis of Indian Draft Standard Levels for RoomAir Conditioners

DOE Office of Scientific and Technical Information (OSTI.GOV)

McNeil, Michael A.; Iyer, Maithili

The Indian Bureau of Energy Efficiency (BEE) finalized its first set of efficiency standards and labels for room air conditioners in July of 2006. These regulations followed soon after the publication of levels for frost-free refrigerators in the same year. As in the case of refrigerators, the air conditioner program introduces Minimum Efficiency Performance Standards (MEPS) and comparative labels simultaneously, with levels for one to five stars. Also like the refrigerator program, BEE defined several successive program phases of increasing stringency. In support of BEE's refrigerator program, Lawrence Berkeley National Laboratory (LBNL) produced an analysis of national impacts of standardsmore » in collaboration with the Collaborative Labeling and Standards Program (CLASP). That analysis drew on LBNL's experience with standards programs in the United States, as well as many other countries. Subsequently, as part of the process for setting optimal levels for air conditioner regulations, CLASP commissioned LBNL to provide support to BEE in the form of a techno-economic evaluation of air conditioner efficiency technologies. This report describes the methodology and results of this techno-economic evaluation. The analysis consists of three components: (1) Cost effectiveness to consumers of efficiency technologies relative to current baseline. (2) Impacts on the current market from efficiency regulations. (3) National energy and financial impacts. The analysis relied on detailed and up-to-date technical data made available by BEE and industry representatives. Technical parameters were used in conjunction with knowledge about air conditioner use patterns in the residential and commercial sectors, and prevailing marginal electricity prices, in order to give an estimate of per-unit financial impacts. In addition, the overall impact of the program was evaluated by combining unit savings with market forecasts in order to yield national impacts. LBNL presented preliminary results of these analyses in May 2006, at a meeting of BEEs Technical Committee for Air Conditioners. This meeting was attended by a wide array of stakeholder, including industry representatives, engineers and consumer advocates. Comments made by stakeholders at this meeting are incorporated into the final analysis presented in this report. The current analysis begins with the Rating Plan drafted by BEE in 2006, along with an evaluation of the market baseline according to test data submitted by manufacturers. MEPS, label rating levels, and baseline efficiencies are presented in Section 2. First, we compare Indian MEPS with current standards in other countries, and assess their relative stringency. Baseline efficiencies are then used to estimate the fraction of models likely to remain on the market at each phase of the program, and the impact on market-weighted efficiency levels. Section 3 deals with cost-effectiveness of higher efficiency design options. The cost-benefit analysis is grounded in technical parameters provided by industry representatives in India. This data allows for an assessment of financial costs and benefits to consumers as a result of the standards and labeling program. A Life-Cycle Cost (LCC) calculation is used to evaluate the impacts of the program at the unit level, thus providing some insight into the appropriateness of the levels chosen, and additional opportunities for further ratcheting. In addition to LCC, we also calculate payback periods, cost of conserved energy (CCE), and return on investment (ROI). Finally, Section 4 covers national impacts. This is an extension of unit level estimates in the two previous sections. Extrapolation to the national level depends on a forecast of air conditioner purchases (shipments), which we describe here. Following the cost-benefit analysis, we construct several efficiency scenarios including the BEE plan, but also considering further potential for efficiency improvement. These are combined with shipments through a stock accounting model in order to forecast air conditioner energy consumption in each scenario, and associated electricity savings and carbon emission mitigation. Finally, financial costs and savings are scaled to the national level to evaluate net fiscal benefits.« less

Personnel involved in the development of nuclear standards in the United States, 1976

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, E.B.

1977-03-01

The development of voluntary nuclear standards in the United States is an active and necessary endeavor of the technical community concerned with the safe, orderly, and economic development of the nuclear potential. There are almost 8000 people presently involved either in writing voluntary standards and codes or in the management and processing roles necessary for their approval and promulgation. This document records the current participation of these people as member, chairman, or secretary of about 900 identified committees and projects. The standards projects are identified with the organizations that are responsible for the preparation, review, and maintenance of the standardsmore » and that provide support through supervisory committees and headquarters staff. The directory has four major sections: personnel, employers, committees, and a KWIC index of committee titles. The directory can be used to identify those nuclear standards projects currently active, to indicate the participation of employers, and to recognize the contributions of individuals to these often interdisciplinary activities.« less

Personnel involved in the development of nuclear standards in the United States, 1975

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, E.B.

The development of voluntary nuclear standards in the United States is an active and necessary endeavor of the technical community concerned with the safe, orderly, and economic development of the nuclear potential. There are almost 8000 people presently involved either in writing voluntary standards and codes or in the management and processing roles necessary for their approval and promulgation. This document records the current participation of these people as member, chairman, or secretary of about 900 identified committees and projects. The standards projects are identified with the organizations that are responsible for the preparation, review, and maintenance of the standardsmore » and that provide support through supervisory committees and headquarters staff. The Directory has four major sections: personnel, employers, committees, and a KWIC Index of committee titles. The Directory can be used to identify those nuclear standards projects currently active, to indicate the participation of employers, and to recognize the contributions of individuals to these often interdisciplinary activities.« less

Range Flight Safety Requirements

NASA Technical Reports Server (NTRS)

Loftin, Charles E.; Hudson, Sandra M.

2018-01-01

The purpose of this NASA Technical Standard is to provide the technical requirements for the NPR 8715.5, Range Flight Safety Program, in regards to protection of the public, the NASA workforce, and property as it pertains to risk analysis, Flight Safety Systems (FSS), and range flight operations. This standard is approved for use by NASA Headquarters and NASA Centers, including Component Facilities and Technical and Service Support Centers, and may be cited in contract, program, and other Agency documents as a technical requirement. This standard may also apply to the Jet Propulsion Laboratory or to other contractors, grant recipients, or parties to agreements to the extent specified or referenced in their contracts, grants, or agreements, when these organizations conduct or participate in missions that involve range flight operations as defined by NPR 8715.5.1.2.2 In this standard, all mandatory actions (i.e., requirements) are denoted by statements containing the term “shall.”1.3 TailoringTailoring of this standard for application to a specific program or project shall be formally documented as part of program or project requirements and approved by the responsible Technical Authority in accordance with NPR 8715.3, NASA General Safety Program Requirements.

[Research model on commodity specification standard of radix Chinese materia medica].

PubMed

Kang, Chuan-Zhi; Zhou, Tao; Jiang, Wei-Ke; Huang, Lu-Qi; Guo, Lan-Ping

2016-03-01

As an important part of the market commodity circulation, the standard grade of Chinese traditional medicine commodity is very important to restrict the market order and guarantee the quality of the medicinal material. The State Council issuing the "protection and development of Chinese herbal medicine (2015-2020)" also make clear that the important task of improving the circulation of Chinese herbal medicine industry norms and the commodity specification standard of common traditional Chinese medicinal materials. However, as a large class of Chinese herbal medicines, the standard grade of the radix is more confused in the market circulation, and lack of a more reasonable study model in the development of the standard. Thus, this paper summarizes the research background, present situation and problems, and several key points of the commodity specification and grade standard in radix herbs. Then, the research model is introduced as an example of Pseudostellariae Radix, so as to provide technical support and reference for formulating commodity specifications and grades standard in other radix traditional Chinese medicinal materials. Copyright© by the Chinese Pharmaceutical Association.

Gateway to the Future. Skill Standards for the Bioscience Industry for Technical Workers in Pharmaceutical Companies, Biotechnology Companies, and Clinical Laboratories.

ERIC Educational Resources Information Center

Education Development Center, Inc., Newton, MA.

The Bioscience Industry Skills Standards Project (BISSP) is developing national, voluntary skill standards for technical jobs in biotechnology and pharmaceutical companies and clinical laboratories in hospitals, universities, government, and independent settings. Research with employees and educators has pinpointed three issues underscoring the…

Comparing Panelists' Understanding of Standard Setting across Multiple Levels of an Alternate Science Assessment

ERIC Educational Resources Information Center

Hansen, Mary A.; Lyon, Steven R.; Heh, Peter; Zigmond, Naomi

2013-01-01

Large-scale assessment programs, including alternate assessments based on alternate achievement standards (AA-AAS), must provide evidence of technical quality and validity. This study provides information about the technical quality of one AA-AAS by evaluating the standard setting for the science component. The assessment was designed to have…

Lying to ourselves: rationality, critical reflexivity, and the moral order as 'structured agency'.

PubMed

Goodman, Benny

2016-07-01

A report suggests that United States' army officers may engage in dishonest reporting regarding their compliance procedures. Similarly, nurses with espoused high ethical standards sometimes fail to live up to them and may do so while deceiving themselves about such practices. Reasons for lapses are complex. However, multitudinous managerial demands arising within 'technical and instrumental rationality' may impact on honest decision-making. This paper suggests that compliance processes, which operates within the social structural context of the technical and instrumental rationality manifest as 'managerialism', contributes to professional 'dishonesty' about lapses in care, sometimes through 'thoughtlessness'. The need to manage risk, measure, account, and control in order to deliver efficiency, effectiveness, and economy (technical rationality) thus has both unintended and dysfunctional consequences. Meeting compliance requirements may be mediated by factors such as the 'affect heuristic' and 'reflexive deliberations' as part of the 'structured agency' of nurses. It is the complexity of 'structured agency' which may explain why some nurses fail to respond to such things as sentinel events, a failure to recognize 'personal troubles' as 'public issues', a failure which to outsiders who expect rational and professional responses may seem inconceivable. There is a need to understand these processes so that nurses can critique the context in which they work and to move beyond either/or explanations of structure or agency for care failures, and professional dishonesty. © 2016 John Wiley & Sons Ltd.

2005 v4.3 Technical Support Document

EPA Pesticide Factsheets

Emissions Modeling for the Final Mercury and Air Toxics Standards Technical Support Document describes how updated 2005 NEI, version 2 emissions were processed for air quality modeling in support of the final Mercury and Air Toxics Standards (MATS).

Lessons Learned and Technical Standards: A Logical Marriage for Future Space Systems Design

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

A comprehensive database of engineering lessons learned that corresponds with relevant technical standards will be a valuable asset to those engaged in studies on future space vehicle developments, especially for structures, materials, propulsion, control, operations and associated elements. In addition, this will enable the capturing of technology developments applicable to the design, development, and operation of future space vehicles as planned in the Space Launch Initiative. Using the time-honored tradition of passing on lessons learned while utilizing the newest information technology, NASA has launched an intensive effort to link lessons learned acquired through various Internet databases with applicable technical standards. This paper will discuss the importance of lessons learned, the difficulty in finding relevant lessons learned while engaged in a space vehicle development, and the new NASA effort to relate them to technical standards that can help alleviate this difficulty.

Assuring Crew Health Protection

NASA Technical Reports Server (NTRS)

Robinson, Judith L.

2007-01-01

Amongst the recommendation of the Columbia Accident Investigation Board (CAIB) were the establishment of an independent technical authorities, one of which is the Health and Medical Technical Authority. This viewgraph presentation reviews the work of this Technical Authority in maintaining standards that are aimed at implementing health and medical policy, responding to medical events and emergencies consistent with acceptable levels defined by standards and providing expertise for program milestones.

Technical Training on High-Order Spectral Analysis and Thermal Anemometry Applications

NASA Technical Reports Server (NTRS)

Maslov, A. A.; Shiplyuk, A. N.; Sidirenko, A. A.; Bountin, D. A.

2003-01-01

The topics of thermal anemometry and high-order spectral analyses were the subject of the technical training. Specifically, the objective of the technical training was to study: (i) the recently introduced constant voltage anemometer (CVA) for high-speed boundary layer; and (ii) newly developed high-order spectral analysis techniques (HOSA). Both CVA and HOSA are relevant tools for studies of boundary layer transition and stability.

California Diploma Project Technical Report II: Alignment Study--Alignment Study of the Health Sciences and Medical Technology Draft Standards and California's Exit Level Common Core State Standards

ERIC Educational Resources Information Center

McGaughy, Charis; de Gonzalez, Alicia

2012-01-01

The California Department of Education is in the process of revising the Career and Technical Education (CTE) Model Curriculum Standards. The Educational Policy Improvement Center (EPIC) conducted an investigation of the draft version of the Health Sciences and Medical Technology Standards (Health Science). The purpose of the study is to…

Effectiveness of Intraventricular Endoscopic Lamina Terminalis Fenestration in Comparison with Standard ETV: Systematic Review of Literature.

PubMed

Giussani, Carlo; Guida, Lelio; Trezza, Andrea; Sganzerla, Erik Pietro

2017-07-01

Endoscopic third ventriculostomy is a consolidated technique for the treatment of hydrocephalus. Despite its effectiveness and feasibility, several technical limitations about its use in certain situations have been described. Lamina terminalis-endoscopic third ventriculostomy (LT-ETV) has been proposed as an alternative technique. Authors systematically reviewed the literature in order to define the effectiveness and limits in comparison with standard ETV. This systematic review followed the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) statement. It has also been registered with the PROSPERO International Prospective Register of Systematic Reviews (CRD42016041596). MEDLINE, Web of Knowledge, and EMBASE were independently searched. Seven studies were found to be eligible. A case of ours was added to the series, totaling 41 patients (mean patient age ± SD was 21.6 ± 20.7 years). Endoscopic findings leading surgeons to perform LT-ETV were abnormal ventricular anatomy (24, 57%), inadequate/insufficient interpeduncular subarachnoid space (11, 26%), a combination of both (5, 12%), and intraoperatory, unsatisfactory third ventricle floor fenestration (2, 5%). Most common pathologies were neurocysticercosis (12, 28.57%), aqueductal stenosis (8, 19%), tuberculous meningitis (4, 9.52%), and medulloblastoma (3, 7.14%). A flexible endoscope was the most used device (36 procedures, 86%), while not determining a statistical relevant diminution of complications in comparison with a rigid endoscope (P = 1.0). An overall success rate of 69% was registered, increasing to 89% if just the first year of follow-up was considered. LT-ETV can be considered a successful technical option when standard ETV cannot be performed, although more complex cerebrovascular anatomy is involved. Therefore we suggest that lateral terminalis fenestration is a valid technical option in experienced hands. Copyright © 2017 Elsevier Inc. All rights reserved.

Direct Final Rule: Nonroad Diesel Technical Amendments and Tier 3 Technical Relief Provision

EPA Pesticide Factsheets

Rule making certain technical corrections to the rules establishing emission standards for nonroad diesel engines and amending those rules to provide manufacturers with a production technical relief provision for Tier 3 equipment.

Analysis of the Integration of Skill Standards into Community College Curriculum

ERIC Educational Resources Information Center

Aragon, Steven R.; Woo, Hui-Jeong; Marvel, Matthew R.

2004-01-01

The utilization of skill standards in the curriculum development process has become an increasingly prominent aspect of the reform movement in career and technical education over the past 10 years. Standards are seen as a way to achieve better accountability within Career and Technical Education (CTE) systems, and improve their quality as well as…

76 FR 43330 - Notice of Release of the Exposure Draft of Technical Bulletin 2011-2, Extended Deferral of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Notice of Release of the Exposure Draft of Technical... Accounting Standards Advisory Board. ACTION: Notice. Board Action: Pursuant to 31 U.S.C. 3511(d), the Federal... October, 2010, notice is hereby given that the Federal Accounting Standards Advisory Board (FASAB) has...

Certification of training

NASA Technical Reports Server (NTRS)

Gibson, Richard S.

1994-01-01

Training has been around as an informal process for countless years. Most higher order animals require some level of training in hunting, social skills, or other survival related skills to continue their existence beyond early infancy. Much of the training is accomplished through imitation, trial and error, and good luck. In some ways the essentials of training in aviation have not deviated from this original formula a great deal. One of the major changes in aviation and other technical areas is that more complex response chains based on a broader base of knowledge are now required. 'To certify' means many things according to the American Heritage dictionary of the English Language. These meanings range from 'to guarantee as meeting a standard' to 'to declare legally insane'. For this discussion, we will use the definition 'an action taken by some authoritative body that essentially guarantees that the instruction meets some defined standard'. In order to make this certification, the responsible body subjects the educational process, training, training device, or simulator to some type of examination to determine its adequacy or validity.

47 CFR 90.548 - Interoperability Technical Standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Section 90.548 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Regulations Governing the Licensing and Use of Frequencies in...—Digital Radio Technical Standards, approved April 15, 1998, Telecommunications Industry Association, ANSI...

47 CFR 90.548 - Interoperability Technical Standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Section 90.548 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Regulations Governing the Licensing and Use of Frequencies in...—Digital Radio Technical Standards, approved April 15, 1998, Telecommunications Industry Association, ANSI...

78 FR 2308 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Order Approving a...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-10

... Change To Address the Authority To Cancel Orders When a Technical or Systems Issue Occurs and To Describe... authority of the Exchange to cancel orders (or release routing-related orders) when a technical or systems... Exchange may encounter situations that make it necessary to cancel orders (or release routing- related...

The world of standards: order or anarchy?

PubMed

Mason, Andrew

2011-02-01

As the development of many new standards for business continuity (BC) is seen across the globe, there is the danger that some of the benefits of developing an industry code or standard are being eroded. The very definition of the term 'standard' - a level of quality or excellence that is accepted as the norm or by which actual attainments are judged - is at risk as the proliferation and diversification of standards in existence and under development today continue to grow almost unchecked. This paper seeks to provide a personal view on the necessity of an international certifiable standard within the BC industry, with the hope that it will influence the debate in this area. In this manner, the paper contributes to the international evolution of BC. The standards related information is based on the author's experience as a member of the British Standards Institute's technical committee that developed BS25999 parts 1 and 2, and his experience in implementing both standards through to certification within his own organisation. References to the Business Continuity Institute are made not as a parochial 'British' group, but in terms of its growing development into a true global professional membership organisation.

[Standardization of hospital feeding].

PubMed

Caracuel García, Ángel Manuel

2015-05-07

Normalization can be understood as the establishing measures against repetitive situations through the development, dissemination, and application of technical design documents called standards. In Andalusia there are 45 public hospitals with 14,606 beds, and in which 11,700 full pensions / day are served. The Working Group on Hospital Food Standardization of the Andalusian Society for Clinical Nutrition and Dietetics, started in 2010, working on the certification of suppliers, product specifications, and meals technical card. - Develop a specific tool to help improving food safety through the certification of their suppliers. - Develop a standardized technical specifications of foodstuffs necessary for the development of menus established codes diets Andalusian hospitals document. - Develop a catalog of data sheets plates of hospital meals, to homogenize menus, respecting local and unifying criteria for qualitative and quantitative ingredients. - Providing documentation and studying of several public hospitals in Andalusia: • Product specifications and certification of suppliers. • International standards certification and distribution companies. • Legislation. • Data sheets for the menu items. • Specifications of different product procurement procedures. - Development of the draft standard HOSPIFOOD®, and approval of the version “0.0”. - Training course for auditors to this standard. - Development of a raw materials catalog as technical cards. - Meals Technical cards review and election of the ones which will be part of the document. After nearly three years of work, we have achieved the following products: - Standardized database of technical specifications for the production of food dietary codes for: fish, seafood, meat and meat products, meats and pates, ready meals, bread and pastries, preserves, milk and dairy products, oils, cereals, legumes , vegetables, fruits, fresh and frozen vegetables, condiments and spices. - Standardized database of technical cards for meals containing the following data: SAS Code, Province, Hospital, name plate, ingredients (g), edible ingredients (g) kcal, Proteins, HC, Fat and Fiber. - HOSPIFOOD® standard certification for food providers in hospitals, school cafeterias and other institutions of social restoration. Patients expect food that is offered during the stay in the hospital, meet basic standards of quality and safety, and therefore it is necessary to design and develop control systems from the award and / or acquisition of food (raw materials and finished) products which subsequently become part of the menu that is offered as part of their treatment. To avoid the effect of fraudulent practice in public health, it’s needed to ensure the quality and safety of the food from the origin and establish the standards for acquisition and subsequent use of it.

42 CFR 493.1413 - Standard; Technical consultant responsibilities.

Code of Federal Regulations, 2013 CFR

2013-10-01

... consultant responsibilities. The technical consultant is responsible for the technical and scientific... of performance of instrument maintenance and function checks; (v) Assessment of test performance...

42 CFR 493.1413 - Standard; Technical consultant responsibilities.

Code of Federal Regulations, 2014 CFR

2014-10-01

... consultant responsibilities. The technical consultant is responsible for the technical and scientific... of performance of instrument maintenance and function checks; (v) Assessment of test performance...

Technical Data Interoperability (TDI) Pathfinder Via Emerging Standards

NASA Technical Reports Server (NTRS)

Conroy, Mike; Gill, Paul; Hill, Bradley; Ibach, Brandon; Jones, Corey; Ungar, David; Barch, Jeffrey; Ingalls, John; Jacoby, Joseph; Manning, Josh;

Evolving the Technical Infrastructure of the Planetary Data System for the 21st Century

NASA Technical Reports Server (NTRS)

Beebe, Reta F.; Crichton, D.; Hughes, S.; Grayzeck, E.

2010-01-01

The Planetary Data System (PDS) was established in 1989 as a distributed system to assure scientific oversight. Initially the PDS followed guidelines recommended by the National Academies Committee on Data Management and Computation (CODMAC, 1982) and placed emphasis on archiving validated datasets. But overtime user demands, supported by increased computing capabilities and communication methods, have placed increasing demands on the PDS. The PDS must add additional services to better enable scientific analysis within distributed environments and to ensure that those services integrate with existing systems and data. To face these challenges the Planetary Data System (PDS) must modernize its architecture and technical implementation. The PDS 2010 project addresses these challenges. As part of this project, the PDS has three fundamental project goals that include: (1) Providing more efficient client delivery of data by data providers to the PDS (2) Enabling a stable, long-term usable planetary science data archive (3) Enabling services for the data consumer to find, access and use the data they require in contemporary data formats. In order to achieve these goals, the PDS 2010 project is upgrading both the technical infrastructure and the data standards to support increased efficiency in data delivery as well as usability of the PDS. Efforts are underway to interface with missions as early as possible and to streamline the preparation and delivery of data to the PDS. Likewise, the PDS is working to define and plan for data services that will help researchers to perform analysis in cost-constrained environments. This presentation will cover the PDS 2010 project including the goals, data standards and technical implementation plans that are underway within the Planetary Data System. It will discuss the plans for moving from the current system, version PDS 3, to version PDS 4.

Involvement of Individuals in the Development of Technical Solutions and Rules of Management for Building Renovation Projects: A Case Study of Latvia

NASA Astrophysics Data System (ADS)

Pukite, I.; Grekis, A.; Geipele, I.; Zeltins, N.

2017-08-01

In March 2016, the Latvian government approved a new support program for increasing energy efficiency in residential apartment buildings. For the support of renovation of apartment buildings in the period from 2016 to 2023, 166 470 588 EUR will be available. Different persons, such as energy auditors, designers, architects, project managers and builders, will be involved in the process of planning, development and implementation of building renovation. At the development stage of the building renovation project, special attention should be devoted to the first stage - energy audit and technical project development. The problem arises due to the fact that each of these individuals, during the development of technical building documentation, does not work as a completely unified system. The implementation of construction project planning and organisational management system is one of the most important factors to guarantee that the quality of building renovation project is ensured in accordance with the laws and regulatory standards. The paper studies mutual cooperation, professionalism and the role of information feedback of personnel involved in the planning stage of building renovation, which is an essential prerequisite for the renovation process in order to achieve high quality of work and reduce the energy performance indicator. The present research includes the analysis of different technical solutions and their impact on energy efficiency. Mutual harmonisation of technical specifications is also investigated.

Access and privacy rights using web security standards to increase patient empowerment.

PubMed

Falcão-Reis, Filipa; Costa-Pereira, Altamiro; Correia, Manuel E

2008-01-01

Electronic Health Record (EHR) systems are becoming more and more sophisticated and include nowadays numerous applications, which are not only accessed by medical professionals, but also by accounting and administrative personnel. This could represent a problem concerning basic rights such as privacy and confidentiality. The principles, guidelines and recommendations compiled by the OECD protection of privacy and trans-border flow of personal data are described and considered within health information system development. Granting access to an EHR should be dependent upon the owner of the record; the patient: he must be entitled to define who is allowed to access his EHRs, besides the access control scheme each health organization may have implemented. In this way, it's not only up to health professionals to decide who have access to what, but the patient himself. Implementing such a policy is walking towards patient empowerment which society should encourage and governments should promote. The paper then introduces a technical solution based on web security standards. This would give patients the ability to monitor and control which entities have access to their personal EHRs, thus empowering them with the knowledge of how much of his medical history is known and by whom. It is necessary to create standard data access protocols, mechanisms and policies to protect the privacy rights and furthermore, to enable patients, to automatically track the movement (flow) of their personal data and information in the context of health information systems. This solution must be functional and, above all, user-friendly and the interface should take in consideration some heuristics of usability in order to provide the user with the best tools. The current official standards on confidentiality and privacy in health care, currently being developed within the EU, are explained, in order to achieve a consensual idea of the guidelines that all member states should follow to transfer such principles into national laws. A perspective is given on the state of the art concerning web security standards, which can be used to easily engineer health information systems complying with the patient empowering goals. In conclusion health systems with the characteristics thus described are technically feasible and should be generally implemented and deployed.

IT Labs Proof-of-Concept Project: Technical Data Interoperability (TDI) Pathfinder Via Emerging Standards

NASA Technical Reports Server (NTRS)

Conroy, Mike; Gill, Paul; Ingalls, John; Bengtsson, Kjell

2014-01-01

No known system is in place to allow NASA technical data interoperability throughout the whole life cycle. Life Cycle Cost (LCC) will be higher on many developing programs if action isn't taken soon to join disparate systems efficiently. Disparate technical data also increases safety risks from poorly integrated elements. NASA requires interoperability and industry standards, but breaking legacy ways is a challenge.

A review and evaluation of the Langley Research Center's Scientific and Technical Information Program: Results of phase 6: The technical report. A survey and analysis

NASA Technical Reports Server (NTRS)

Mccullough, R. A.; Pinelli, T. E.; Pilley, D. D.; Stohrer, F. F.

1982-01-01

Current practice and usage using selected technical reports; literature relative to the sequential, language, and presentation components of technical reports; and NASA technical report publications standards are discussed. The effctiveness of the technical report as a product for information dissemination is considered.

Investigation of the factor structure of the Wechsler Adult Intelligence Scale--Fourth Edition (WAIS-IV): exploratory and higher order factor analyses.

PubMed

Canivez, Gary L; Watkins, Marley W

2010-12-01

The present study examined the factor structure of the Wechsler Adult Intelligence Scale--Fourth Edition (WAIS-IV; D. Wechsler, 2008a) standardization sample using exploratory factor analysis, multiple factor extraction criteria, and higher order exploratory factor analysis (J. Schmid & J. M. Leiman, 1957) not included in the WAIS-IV Technical and Interpretation Manual (D. Wechsler, 2008b). Results indicated that the WAIS-IV subtests were properly associated with the theoretically proposed first-order factors, but all but one factor-extraction criterion recommended extraction of one or two factors. Hierarchical exploratory analyses with the Schmid and Leiman procedure found that the second-order g factor accounted for large portions of total and common variance, whereas the four first-order factors accounted for small portions of total and common variance. It was concluded that the WAIS-IV provides strong measurement of general intelligence, and clinical interpretation should be primarily at that level.

30 CFR 7.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... was issued. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group... this part. Applicant. An individual or organization that manufactures or controls the assembly of a... technical requirements and have been manufactured as approved. Technical requirements. The design and...

30 CFR 7.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... was issued. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group... this part. Applicant. An individual or organization that manufactures or controls the assembly of a... technical requirements and have been manufactured as approved. Technical requirements. The design and...

30 CFR 7.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... was issued. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group... this part. Applicant. An individual or organization that manufactures or controls the assembly of a... technical requirements and have been manufactured as approved. Technical requirements. The design and...

30 CFR 7.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... was issued. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group... this part. Applicant. An individual or organization that manufactures or controls the assembly of a... technical requirements and have been manufactured as approved. Technical requirements. The design and...

30 CFR 7.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... was issued. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group... this part. Applicant. An individual or organization that manufactures or controls the assembly of a... technical requirements and have been manufactured as approved. Technical requirements. The design and...

[Update to ISO 15189:2012, and future prospects].

PubMed

Shimoda, Katsuji; Kubono, Katsuo

2014-06-01

ISO (the International Organization for Standardization) is a worldwide federation of national standard bodies (ISO member bodies). The work of preparing international standards is normally carried out through ISO technical committees. ISO 15189 was prepared by Technical Committee ISO/TC 212, clinical laboratory testing, and in vitro diagnostic test systems. This third edition replaces the second edition (ISO 15189:2007), which was technically revised. Medical laboratory services are essential for patient care and, therefore, have to be available to meet the needs of all patients and the clinical personnel responsible for the care of those patients.

A research review on clinical needs, technical requirements, and normativity in the design of surgical robots.

PubMed

Díaz, Carlos Eduardo; Fernández, Roemi; Armada, Manuel; García, Felipe

2017-12-01

Nowadays robots play an important role in society, mainly due to the significant benefits they provide when utilized for assisting human beings in the execution of dangerous or repetitive tasks. Medicine is one of the fields in which robots are gaining greater use and development, especially those employed in minimally invasive surgery (MIS). However, due to the particular conditions of the human body where robots have to act, the design of these systems is complex, not only from a technical point of view, but also because the clinical needs and the normativity aspects are important considerations that have to be taken into account in order to achieve better performances and more secure systems for patients and surgeons. Thus, this paper explores the clinical needs and the technical requirements that will trace the roadmap for the next scientific and technological advances in the field of robotic surgery, the metrics that should be defined for safe technology development and the standards that are being elaborated for boosting the industry and facilitating systems integration. Copyright © 2017 John Wiley & Sons, Ltd.

The Nexus between Science Literacy & Technical Literacy: A State by State Analysis of Engineering Content in State Science Standards

ERIC Educational Resources Information Center

Koehler, Catherine M.; Faraclas, Elias; Giblin, David; Moss, David M.; Kazerounian, Kazem

2013-01-01

This study explores how engineering concepts are represented in secondary science standards across the nation by examining how engineering and technical concepts are infused into these frameworks. Secondary science standards from 49 states plus the District of Columbia were analyzed and ranked based on how many engineering concepts were found.…

A Question of Trust: Predictive Conditions for Adaptive and Technical Leadership in Educational Contexts

ERIC Educational Resources Information Center

Daly, Alan J.; Chrispeels, Janet

2008-01-01

Recent studies have suggested that educational leaders enacting a balance of technical and adaptive leadership have an effect on increasing student achievement. Technical leadership focuses on problem-solving or first-order changes within existing structures and paradigms. Adaptive leadership involves deep or second-order changes that alter…

Wet process shotcrete: An ecological and economical quality product for the future

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bracher, G.

1995-12-31

Shotcrete is an essential component of modern tunnelling and its importance is continuously growing. In order to comply with this role, the demands made on quality and economy have increased considerably. The wet process Shotcrete has been established on all the major job sites in Switzerland. Regarding the technical and ecological aspects, the introduction of an alkali free non-toxic accelerator has set up a new standard. Enormous high early strengths in combination with strength gains compared to the reference concrete can be achieved.

25 CFR 547.15 - What are the minimum technical standards for electronic data communications between system...

Code of Federal Regulations, 2010 CFR

2010-04-01

... WITH THE PLAY OF CLASS II GAMES § 547.15 What are the minimum technical standards for electronic data...) Player tracking information; (8) Download Packages; and (9) Any information that affects game outcome. (b...

25 CFR 547.15 - What are the minimum technical standards for electronic data communications between system...

Code of Federal Regulations, 2012 CFR

2012-04-01

... WITH THE PLAY OF CLASS II GAMES § 547.15 What are the minimum technical standards for electronic data...) Player tracking information; (8) Download Packages; and (9) Any information that affects game outcome. (b...

25 CFR 547.15 - What are the minimum technical standards for electronic data communications between system...

Code of Federal Regulations, 2011 CFR

2011-04-01

... WITH THE PLAY OF CLASS II GAMES § 547.15 What are the minimum technical standards for electronic data...) Player tracking information; (8) Download Packages; and (9) Any information that affects game outcome. (b...

45 CFR 164.312 - Technical safeguards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Technical safeguards. 164.312 Section 164.312 Public Welfare Department of Health and Human Services ADMINISTRATIVE DATA STANDARDS AND RELATED REQUIREMENTS SECURITY AND PRIVACY Security Standards for the Protection of Electronic Protected Health...

Application of the Rehabilitation Act Section 508 to the NPFC

DOT National Transportation Integrated Search

2001-04-09

This paper provides a brief summary of Section 508 and its associated technical standards in layman's terms. It identifies the elements of the NPFC information technology (IT) that are affected by the technical standards and a brief discussion of how...

Progress on the Development of the UAS C2 Link and Supporting Spectrum - from LOS to BLOS

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.; Griner, James H.; Bishop, William D.; Matolak, David W.; Wilson, Jeffrey D.

2017-01-01

In order to provide for the safe integration of unmanned aircraft systems (UAS) into the National Airspace System, the control and non-payload communications (CNPC) link connecting the ground-based pilot with the unmanned aircraft must be highly reliable and robust, based upon standards that enable certification. Both line-of-sight (LOS) links using terrestrial-based communications and beyond-line-of-sight (BLOS) links using satellite communications are required to support UAS operations. The development of standards has been undertaken by RTCA Special Committee 228 (SC-228), with supporting technical data developed by NASA under the UAS in the National Airspace (NAS) Project. As a result of this work minimum operational performance standards (MOPS) have been completed and published for the LOS CNPC system. The second phase of work, for both NASA and RTCA involves the BLOS CNPC systems. The development of technical data to support MOPS development for UAS BLOS satellite-based CNPC links has now been initiated by NASA, and RTCA SC-228 has organized itself to begin the MOPS development process. This paper will provide an overview of the work that has been completed to date by the Communications Subproject in support of LOS C2 communications for UAS followed by an update of plans and progress for the BLOS phase of the project, with the focus on the UAS C2 spectrum aspects.

Evaluation of ISO EN 13606 as a result of its implementation in XML

PubMed Central

Sun, Shanghua; Hassan, Taher; Kalra, Dipak

2013-01-01

The five parts of the ISO EN 13606 standard define a means by which health-care records can be exchanged between computer systems. Starting within the European standardisation process, it has now become internationally ratified in ISO. However, ISO standards do not require that a reference implementation be provided, and in order for ISO EN 13606 to deliver the expected benefits, it must be provided not as a document, but as an operational system that is not vendor specific. This article describes the evolution of an Extensible Markup Language (XML) Schema through three iterations, each of which emphasised one particular approach to delivering an executable equivalent to the printed standard. Developing these operational versions and incorporating feedback from users of these demonstrated where implementation compromises were needed and exposed defects in the standard. These are discussed herein. They may require a future technical revision to ISO EN 13606 to resolve the issues identified. PMID:23995217

Evaluation of external RNA controls for the standardisation of gene expression biomarker measurements.

PubMed

Devonshire, Alison S; Elaswarapu, Ramnath; Foy, Carole A

2010-11-24

Gene expression profiling is an important approach for detecting diagnostic and prognostic biomarkers, and predicting drug safety. The development of a wide range of technologies and platforms for measuring mRNA expression makes the evaluation and standardization of transcriptomic data problematic due to differences in protocols, data processing and analysis methods. Thus, universal RNA standards, such as those developed by the External RNA Controls Consortium (ERCC), are proposed to aid validation of research findings from diverse platforms such as microarrays and RT-qPCR, and play a role in quality control (QC) processes as transcriptomic profiling becomes more commonplace in the clinical setting. Panels of ERCC RNA standards were constructed in order to test the utility of these reference materials (RMs) for performance characterization of two selected gene expression platforms, and for discrimination of biomarker profiles between groups. The linear range, limits of detection and reproducibility of microarray and RT-qPCR measurements were evaluated using panels of RNA standards. Transcripts of low abundance (≤ 10 copies/ng total RNA) showed more than double the technical variability compared to higher copy number transcripts on both platforms. Microarray profiling of two simulated 'normal' and 'disease' panels, each consisting of eight different RNA standards, yielded robust discrimination between the panels and between standards with varying fold change ratios, showing no systematic effects due to different labelling and hybridization runs. Also, comparison of microarray and RT-qPCR data for fold changes showed agreement for the two platforms. ERCC RNA standards provide a generic means of evaluating different aspects of platform performance, and can provide information on the technical variation associated with quantification of biomarkers expressed at different levels of physiological abundance. Distinct panels of standards serve as an ideal quality control tool kit for determining the accuracy of fold change cut-off threshold and the impact of experimentally-derived noise on the discrimination of normal and disease profiles.

Technical support documentation for the Automated Residential Energy Standard (ARES) in support of proposed interim energy conservation voluntary performance standards for new non-federal residential buildings: Volume 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The Automated Residential Energy Standard (ARES) program is designed to identify levels of thermal integrity (e.g., insulation levels, glazing layers, equipment efficiencies, etc.) that are cost effective for typical residential structures and to create a residential energy standard based on these levels. This document contains technical background the explains the data and the algorithms used by the program.

25 CFR 547.11 - What are the minimum technical standards for money and credit handling?

Code of Federal Regulations, 2010 CFR

2010-04-01

... GAMES § 547.11 What are the minimum technical standards for money and credit handling? This section... interface is: (i) Involved in the play of a game; (ii) In audit mode, recall mode or any test mode; (iii...

25 CFR 547.11 - What are the minimum technical standards for money and credit handling?

Code of Federal Regulations, 2012 CFR

2012-04-01

... GAMES § 547.11 What are the minimum technical standards for money and credit handling? This section... interface is: (i) Involved in the play of a game; (ii) In audit mode, recall mode or any test mode; (iii...

25 CFR 547.11 - What are the minimum technical standards for money and credit handling?

Code of Federal Regulations, 2011 CFR

2011-04-01

... GAMES § 547.11 What are the minimum technical standards for money and credit handling? This section... interface is: (i) Involved in the play of a game; (ii) In audit mode, recall mode or any test mode; (iii...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Adaptation of technical standards. 653.3 Section 653.3 Agriculture Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE... needs. These adaptations must be approved by the Administrator of the Natural Resources Conservation...

DEVELOPMENT OF INTERNATIONAL STANDARDS FOR AIR QUALITY MONITORING AND CONTROL

EPA Science Inventory

This report presents a description of the activities and accomplishments of the American Society for Testing and Materials' U. S. Technical Advisory Group (TAG) to the International Standards Organization's Technical Committee 146 on Air Quality. The purpose of the TAG is to re...

National Skill Standards Implementation Guide.

ERIC Educational Resources Information Center

National Vocational Technical Education Foundation, Washington, DC.

This guide was developed to encourage state policy makers and local school boards to implement the national skill standards formulated by the National Institute for Automotive Service Excellence (ASE) and the National Automotive Technician Education Foundation (NATEF) in high schools, technical schools, and technical and community colleges.…

Technical Standards for Nursing Education Programs in the 21st Century.

PubMed

Ailey, Sarah H; Marks, Beth

The Institute of Medicine (2000, 2002) exposed serious safety problems in the health system and called for total qualitative system change. The Institute of Medicine (2011, 2015) also calls for improving the education of nurses to provide leadership for a redesigned health system. Intertwined with improving education is the need to recruit and retain diverse highly qualified students. Disability is part of diversity inclusion, but current technical standards (nonacademic requirements) for admission to many nursing programs are a barrier to the entry of persons with disabilities. Rehabilitation nurse leaders are in a unique position to improve disability diversity in nursing. The purpose of this paper is to discuss the importance of disability diversity in nursing. The history of existing technical standards used in many nursing programs is reviewed along with examples. On the basis of the concept that disability inclusion is a part of diversity inclusion, we propose a new model of technical standards for nursing education. Rehabilitation nurse leaders can lead in eliminating barriers to persons with disabilities entering nursing.

Engineering Lessons Learned and Systems Engineering Applications

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.

2005-01-01

Systems Engineering is fundamental to good engineering, which in turn depends on the integration and application of engineering lessons learned. Thus, good Systems Engineering also depends on systems engineering lessons learned from within the aerospace industry being documented and applied. About ten percent of the engineering lessons learned documented in the NASA Lessons Learned Information System are directly related to Systems Engineering. A key issue associated with lessons learned datasets is the communication and incorporation of this information into engineering processes. As part of the NASA Technical Standards Program activities, engineering lessons learned datasets have been identified from a number of sources. These are being searched and screened for those having a relation to Technical Standards. This paper will address some of these Systems Engineering Lessons Learned and how they are being related to Technical Standards within the NASA Technical Standards Program, including linking to the Agency's Interactive Engineering Discipline Training Courses and the life cycle for a flight vehicle development program.

Technical writing versus technical writing

NASA Technical Reports Server (NTRS)

Dillingham, J. W.

1981-01-01

Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

Family of Advanced Beyond Line-of-Sight Terminals (FAB-T)

DTIC Science & Technology

2015-12-01

Architecture (DoD IEA), excepting tactical and non- operational (OP) communications 3) Compliant with GIG Technical Guidance ( GTG ) to include...Information Technology (IT) standards identified in the Standards FAB-T December 2015 SAR March 21, 2016 15:24:15 UNCLASSIFIED 24 Technical Guidance ( GTG ...Availability Anti-spoofing Module (SAASM), Spectrum and Joint Tactical Radio System (JTRS) requirements. Compliant GTG to include IT standards

78 FR 2284 - Methodology for Selecting Job Corps Centers for Closure; Comments Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-10

... (GED), and career technical training credentials, including industry-recognized credentials, state... align existing career technical training programs to technical standards established by industries or... technical training. Both PIPs and CAPs are used for continued monitoring and implemented for USDA and...

75 FR 27273 - Hazardous Materials; Packages Intended for Transport by Aircraft

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

...PHMSA proposes to amend requirements in the Hazardous Materials Regulations to enhance the integrity of inner packagings or receptacles of combination packagings containing liquid hazardous material by ensuring they remain intact when subjected to the reduced pressure and other forces encountered in air transportation. In order to substantially decrease the likelihood of a hazardous materials release, the proposed amendments: prescribe specific test protocols and standards for determining whether an inner packaging or receptacle is capable of meeting the pressure differential requirements specified in the regulations and, consistent with the 2011-2012 edition of the International Civil Aviation Organization Technical Instructions for the Safe Transport of Dangerous Goods by Aircraft (ICAO Technical Instructions), require the closures on all inner packagings containing liquids within a combination packaging to be secured by a secondary means or, under certain circumstances, permit the use of a liner.

Standardization in software conversion of (ROM) estimating

NASA Technical Reports Server (NTRS)

Roat, G. H.

1984-01-01

Technical problems and their solutions comprise by far the majority of work involved in space simulation engineering. Fixed price contracts with schedule award fees are becoming more and more prevalent. Accurate estimation of these jobs is critical to maintain costs within limits and to predict realistic contract schedule dates. Computerized estimating may hold the answer to these new problems, though up to now computerized estimating has been complex, expensive, and geared to the business world, not to technical people. The objective of this effort was to provide a simple program on a desk top computer capable of providing a Rough Order of Magnitude (ROM) estimate in a short time. This program is not intended to provide a highly detailed breakdown of costs to a customer, but to provide a number which can be used as a rough estimate on short notice. With more debugging and fine tuning, a more detailed estimate can be made.

Anthropometric characteristics and motor skills in talent selection and development in indoor soccer.

PubMed

Ré, Alessandro H Nicolai; Corrêa, Umberto César; Böhme, Maria Tereza S

2010-06-01

Kick performance, anthropometric characteristics, slalom, and linear running were assessed in 49 (24 elite, 25 nonelite) postpubertal indoor soccer players in order to (a) verify whether anthropometric characteristics and physical and technical capacities can distinguish players of different competitive levels, (b) compare the kicking kinematics of these groups, with and without a defined target, and (c) compare results on the assessments and coaches' subjective rankings of the players. Thigh circumference and specific technical capacities differentiated the players by level of play; cluster analysis correctly classified 77.5% of the players. The correlation between players' standardized measures and the coaches' rankings was 0.29. Anthropometric characteristics and physical capacities do not necessarily differentiate players at post-pubertal stages and should not be overvalued during early development. Considering the coaches' rankings, performance measures outside the specific game conditions may not be useful in identification of talented players.

Approach to the E-ELT dome and main structure challenges

NASA Astrophysics Data System (ADS)

Bilbao, Armando; Murga, Gaizka; Gómez, Celia; Llarena, Javier

2014-07-01

The E-ELT as a whole could be classified as an extremely challenging project. More precisely, it should be defined as an array of many different sub-challenges, which comprise technical, logistical and managerial matters. This paper reviews some of these critical challenges, in particular those related to the Dome and the Main Structure, suggesting ways to face them in the most pragmatic way possible. Technical challenges for the Dome and the Main Structure are mainly related to the need to upscale current design standards to an order of magnitude larger design. Trying a direct design escalation is not feasible; it would not work. A design effort is needed to cross hybridize current design standards with technologies coming from other different applications. Innovative design is therefore not a wish but a must. And innovative design comes along with design risk. Design risk needs to be tackled from two angles: on the one hand through thorough design validation analysis and on the other hand through extensive pre-assembly and testing. And, once again, full scale integrated pre-assembly and testing of extremely large subsystems is not always possible. Therefore, defining a comprehensive test plan for critical components, critical subsystems and critical subassemblies becomes essential. Logistical challenges are linked to the erection site. Cerro Armazones is a remote site and this needs to be considered when evaluating transport and erection requirements. But it is not only the remoteness of the site that needs to be considered. The size of both Dome and Main Structure require large construction cranes and a well defined erection plan taking into account pre-assembly strategies, limited plan area utilization, erection sequence, erection stability during intermediate stages and, very specifically, efficient coordination between the Dome and the Main Structure erection processes. Managerial issues pose another set of challenges in this project. Both the size of the project and its special technical characteristics require specific managerial skills. Due to the size of the project it becomes essential to effectively manage and integrate a large number of suppliers and fabricators, of very different nature and geographically distributed. Project management plans need to cope with this situation. Also, extensive on site activities require intensive on site organization in line with large construction management strategies. Finally, the technical edge of the project requires deep technical understanding at management level in order to be able to take sound strategic decisions throughout the project in terms of the overall project quality, cost and schedule.

Technical/Engineering. Georgia Core Standards for Occupational Clusters.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Occupational Studies.

This document lists core standards and occupational knowledge and skills that have been identified and validated by industry as necessary to all Georgia students in secondary-level technical/engineering programs. First, foundation skills are grouped as follows: basic skills (reading, writing, arithmetic/mathematics, listening, speaking); thinking…

75 FR 27227 - Energy Conservation Program: Energy Conservation Standards for Residential Central Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

... that DOE could consider for these products. DOE also encouraged written comments on these subjects... conservation standards notice of public meeting (NOPM) and availability of the preliminary technical support... Federal Register notice announcing the availability of its preliminary technical support document for...

76 FR 4102 - Smart Grid Interoperability Standards; Supplemental Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-24

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RM11-2-000] Smart Grid... Federal Energy Regulatory Commission announced that a Technical Conference on Smart Grid Interoperability... National Institute of Standards and Technology are ready for Commission consideration in a rulemaking...

78 FR 20503 - Energy Conservation Program: Availability of the Interim Technical Support Document for High...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-05

... Conservation Program: Availability of the Interim Technical Support Document for High-Intensity Discharge Lamps... high-intensity discharge (HID) lamps energy conservation standards in the Federal Register. This... interim analysis for high- intensity discharge lamps energy conservation standards. The notice provided...

Technical Support Documents Used to Develop the Chesapeake Bay TMDL

EPA Pesticide Factsheets

The Chesapeake Bay TMDL development was supported by several technical documents for water quality standards and allocation methodologies specific to the Chesapeake Bay. This page provides the technical support documents.

Cognitive training for technical and non-technical skills in robotic surgery: a randomised controlled trial.

PubMed

Raison, Nicholas; Ahmed, Kamran; Abe, Takashige; Brunckhorst, Oliver; Novara, Giacomo; Buffi, Nicolò; McIlhenny, Craig; van der Poel, Henk; van Hemelrijck, Mieke; Gavazzi, Andrea; Dasgupta, Prokar

2018-05-07

To investigate the effectiveness of motor imagery (MI) for technical skill and non-technical skill (NTS) training in minimally invasive surgery (MIS). A single-blind, parallel-group randomised controlled trial was conducted at the Vattikuti Institute of Robotic Surgery, King's College London. Novice surgeons were recruited by open invitation in 2015. After basic robotic skills training, participants underwent simple randomisation to either MI training or standard training. All participants completed a robotic urethrovesical anastomosis task within a simulated operating room. In addition to the technical task, participants were required to manage three scripted NTS scenarios. Assessment was performed by five blinded expert surgeons and a NTS expert using validated tools for evaluating technical skills [Global Evaluative Assessment of Robotic Skills (GEARS)] and NTS [Non-Technical Skills for Surgeons (NOTSS)]. Quality of MI was assessed using a revised Movement Imagery Questionnaire (MIQ). In all, 33 participants underwent MI training and 29 underwent standard training. Interrater reliability was high, Krippendorff's α = 0.85. After MI training, the mean (sd) GEARS score was significantly higher than after standard training, at 13.1 (3.25) vs 11.4 (2.97) (P = 0.03). There was no difference in mean NOTSS scores, at 25.8 vs 26.4 (P = 0.77). MI training was successful with significantly higher imagery scores than standard training (mean MIQ score 5.1 vs 4.5, P = 0.04). Motor imagery is an effective training tool for improving technical skill in MIS even in novice participants. No beneficial effect for NTS was found. © 2018 The Authors BJU International © 2018 BJU International Published by John Wiley & Sons Ltd.

Comparison of the Standard of Air Leakage in Current Metal Duct Systems in the World

NASA Astrophysics Data System (ADS)

Di, Yuhui; Wang, Jiqian; Feng, Lu; Li, Xingwu; Hu, Chunlin; Shi, Junshe; Xu, Qingsong; Qiao, Leilei

2018-01-01

Based on the requirements of air leakage of metal ducts in Chinese design standards, technical measures and construction standards, this paper compares the development history, the classification of air pressure levels and the air tightness levels of air leakage standards of current Chinese and international metal ducts, sums up the differences, finds shortage by investigating the design and construction status and access to information, and makes recommendations, hoping to help the majority of engineering and technical personnel.

The Global Genome Biodiversity Network (GGBN) Data Standard specification

PubMed Central

Droege, G.; Barker, K.; Seberg, O.; Coddington, J.; Benson, E.; Berendsohn, W. G.; Bunk, B.; Butler, C.; Cawsey, E. M.; Deck, J.; Döring, M.; Flemons, P.; Gemeinholzer, B.; Güntsch, A.; Hollowell, T.; Kelbert, P.; Kostadinov, I.; Kottmann, R.; Lawlor, R. T.; Lyal, C.; Mackenzie-Dodds, J.; Meyer, C.; Mulcahy, D.; Nussbeck, S. Y.; O'Tuama, É.; Orrell, T.; Petersen, G.; Robertson, T.; Söhngen, C.; Whitacre, J.; Wieczorek, J.; Yilmaz, P.; Zetzsche, H.; Zhang, Y.; Zhou, X.

2016-01-01

Genomic samples of non-model organisms are becoming increasingly important in a broad range of studies from developmental biology, biodiversity analyses, to conservation. Genomic sample definition, description, quality, voucher information and metadata all need to be digitized and disseminated across scientific communities. This information needs to be concise and consistent in today’s ever-increasing bioinformatic era, for complementary data aggregators to easily map databases to one another. In order to facilitate exchange of information on genomic samples and their derived data, the Global Genome Biodiversity Network (GGBN) Data Standard is intended to provide a platform based on a documented agreement to promote the efficient sharing and usage of genomic sample material and associated specimen information in a consistent way. The new data standard presented here build upon existing standards commonly used within the community extending them with the capability to exchange data on tissue, environmental and DNA sample as well as sequences. The GGBN Data Standard will reveal and democratize the hidden contents of biodiversity biobanks, for the convenience of everyone in the wider biobanking community. Technical tools exist for data providers to easily map their databases to the standard. Database URL: http://terms.tdwg.org/wiki/GGBN_Data_Standard PMID:27694206

The European Glaucoma Society Glaucocard project: improved digital documentation of medical data for glaucoma patients based on standardized structured international datasets.

PubMed

Schargus, Marc; Grehn, Franz; Glaucocard Workgroup

2008-12-01

To evaluate existing international IT-based ophthalmological medical data projects, and to define a glaucoma data set based on existing international standards of medical and ophthalmological documentation. To develop the technical environment for easy data mining and data exchange in different countries in Europe. Existing clinical and IT-based projects for documentation of medical data in general medicine and ophthalmology were analyzed to create new data sets for medical documentation in glaucoma patients. Different types of data transfer methods were evaluated to find the best method of data exchange between ophthalmologists in different European countries. Data sets from existing IT projects showed a wide variability in specifications, use of codes, terms and graphical data (perimetry, optic nerve analysis etc.) in glaucoma patients. New standardized digital datasets for glaucoma patients were defined, based on existing standards, which can be used by general ophthalmologists for follow-up examinations and for glaucoma specialists to perform teleconsultation, also across country borders. Datasets are available in different languages. Different types of data exchange methods using secure medical data transfer by internet, USB stick and smartcard were tested for different countries with regard to legal acceptance, practicability and technical realization (e.g. compatibility with EMR systems). By creating new standardized glaucoma specific cross-national datasets, it is now possible to develop an electronic glaucoma patient record system for data storage and transfer based on internet, smartcard or USB stick. The digital data can be used for referrals and for teleconsultation of glaucoma specialists in order to optimize glaucoma treatment. This should lead to an increase of quality in glaucoma care, and prevent expenses in health care costs by unnecessary repeated examinations.

Expectations and outcome skills of a generalist health care administrator.

PubMed

Jones, V B; Taylor, L C

1990-01-01

The question of the degree of technical versus managerial competence to be found in future graduates from health administration programs is not easily resolved. In the HIMSS 1988 survey of CIOs the attributes needed for success are listed in descending rank order as follows: leadership ability, vision/imagination, knowledge of hospital systems, business acumen, decisiveness, and technical competence. CIOs ranked technical competence as less important than other attributes associated with general management success. The expectations for attitudes, knowledge, and skills presented in this article support the greater importance of management abilities relative to pure technical competence. However, it is vital that an appropriate level of technical knowledge and skill be maintained to enable future alumni of health administration programs to function effectively as administrators. Depending on their role in a health care organization, greater or lesser technical knowledge may be needed. Those pursuing a career path toward CIO must, of necessity, have greater technical knowledge and skill. We have discussed necessary and expected attitudes, knowledge, and skills that will be needed by the generalist health administration graduate in the future. It will be important to develop and maintain an attitude that MIS is a strategic tool, that health care technology is a corporate asset, and that information is power. Graduates must recognize the necessity of maintaining and enhancing their knowledge and skills through continuing education. The knowledge base of MIS education should focus on determining information needs to support strategic goals, understanding of general systems theory, principles of systems analysis, design, implementation and maintenance, awareness and exposure to standard application software, and an awareness of external sources of data.(ABSTRACT TRUNCATED AT 250 WORDS)

48 CFR 247.270-2 - Technical provisions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Technical provisions. 247...-Related Services 247.270-2 Technical provisions. (a) Because conditions vary at different ports, and sometimes within the same port, it is not practical to develop standard technical provisions covering all...

The standard of care: a case report and ethical analysis.

PubMed

La Puma, J; Schiedermayer, D L; Toulmin, S; Miles, S H; McAtee, J A

1988-01-01

Physicians increasingly allow their perceived legal responsibilities to displace their clinical judgment. Misunderstandings that surround the term "standard of care" have encouraged fears of liability and have led to the practice of defensive medicine. Physicians may consider the standard of care to be a technical or legal obligation, but an optimal standard would be one based on detailed knowledge of a patient's medical history and personal condition. It would include the physician's clinical judgment, which integrates specific technical and legal information with clinical experience in caring for patients. Occasionally, such judgment may conflict with the rulings of a court, which considers technical and legal information without the benefit of clinical judgment. Physicians must be prepared to be advocates for their patients, especially when legal proceedings are flawed or injurious. Systematic processes of examination and analysis, such as those used by ethics consultants, can help resolve questions about the standard of care.

1997 DOE technical standards program workshop: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-10-01

The Department of Energy held its annual Technical Standards Program Workshop on July 8--10, 1997, at the Loews L`Enfant Plaza Hotel in Washington, DC. The workshop focused on aspects of implementation of the National Technology Transfer and Advancement Act of 1995 [Public Law (PL) 104-113] and the related revision (still pending) to OMB Circular A119 (OMB A119), Federal Participation in the Development and Use of Voluntary Standards. It also addressed DOE`s efforts in transitioning to a standards-based operating culture, and, through this transition, to change from a developer of internal technical standards to a customer of external technical standards. Themore » workshop was designed to provide a forum to better understand how the new law is affecting Department activities. Panel topics such as ``Public Law 104-113 and Its Influence on Federal Agency Standards Activities`` and ``Update on Global Standards Issues`` provided insight on both the internal and external effects of the new law. Keynote speaker Richard Meier of Meadowbrook International (and formerly the Deputy Assistant US Trade Representative) addressed the subject of international trade balance statistics. He pointed out that increases in US export figures do not necessarily indicate increases in employment. Rather, increased employment results from product growth. Mr Meier also discussed issues such as the US migration to the sue of the metric system, the impact of budget limitations on Government participation in voluntary standards organizations, international standards ISO 9000 and ISO 14000, and DOE`s role in the worldwide transition from weapons production to cleanup.« less

77 FR 39552 - Self-Regulatory Organizations; NASDAQ OMX BX, Inc.; Order Approving a Proposed Rule Change With...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

... Exchange or NASDAQ Execution Services To Cancel Orders When a Technical or Systems Issue Occurs and To... the authority of BX or NASDAQ Execution Services (``NES'') to cancel orders when a technical or... issue may occur at BX, NES, or a routing destination that causes BX or NES to cancel orders, if BX or...

77 FR 39543 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Order Approving a Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-03

... the Authority of NASDAQ or NASDAQ Execution Services To Cancel Orders When a Technical or Systems...'') to cancel orders when a technical or systems issue occurs and to describe the operation of an error... causes NASDAQ or NES to cancel orders, if NASDAQ or NES determines that such action is necessary to...

77 FR 3766 - PJM Interconnection, L.L.C.; Notice of Staff Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-25

... Interconnection, L.L.C.; Notice of Staff Technical Conference On December 14, 2011, the Commission issued an order... Interconnection, L.L.C.'s (PJM) filing.\\1\\ Take notice that the technical conference will be held on February 14...\\ PJM Interconnection, L.L.C., 137 FERC ] 61,204 (2011) (December 14 Order). All interested parties are...

A Survey of Technical Standards for Command and Control Information Systems

DTIC Science & Technology

1991-09-01

H-1 Appendix I Status of Work on Lower-Layer OSI STANAGS ................ I-1 Appendix J Status of NATO OSI STANAGS ...standards efforts for use of open systems in international military systems. Thus, TSGCE SG9 draft standardization agreements ( STANAGs ), NATO...Work in NATO OSI STANAGs for the Use of Open- --- I ISystems9 References I Acronyms Index JTC: Joint Technical Committee SC: Subcommittee Figure 1

76 FR 38550 - Technical Standard DOE-STD-1095-2011, Department of Energy Laboratory Accreditation for External...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-01

... Laboratory Accreditation for External Dosimetry AGENCY: Office of Health, Safety and Security, Department of... Department) is issuing Technical Standard DOE-STD-1095-2011, Department of Energy Laboratory Accreditation... part, to determine whether to accredit dosimetry programs in accordance with the DOE Laboratory...

25 CFR 547.13 - What are the minimum technical standards for program storage media?

Code of Federal Regulations, 2013 CFR

2013-04-01

... storage media? 547.13 Section 547.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR... the minimum technical standards for program storage media? (a) Removable program storage media. All removable program storage media must maintain an internal checksum or signature of its contents...

25 CFR 547.13 - What are the minimum technical standards for program storage media?

Code of Federal Regulations, 2014 CFR

2014-04-01

... storage media? 547.13 Section 547.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR... the minimum technical standards for program storage media? (a) Removable program storage media. All removable program storage media must maintain an internal checksum or signature of its contents...

Additional Final Area Designations and Technical Amendment for the 2012 Annual Fine Particle Standard Established in 2012 - Mar 2015

EPA Pesticide Factsheets

EPA is establishing or revising initial area designations and a technical amendment to correct an inadvertent error in the initial designation for one area for the 2012 annual national ambient air quality standards for fine particle pollution.

NASA STI Program Coordinating Council Twelfth Meeting: Standards

NASA Technical Reports Server (NTRS)

1994-01-01

The theme of this NASA Scientific and Technical Information Program Coordinating Council Meeting was standards and their formation and application. Topics covered included scientific and technical information architecture, the Open Systems Interconnection Transmission Control Protocol/Internet Protocol, Machine-Readable Cataloging (MARC) open system environment procurement, and the Government Information Locator Service.

25 CFR 547.15 - What are the minimum technical standards for electronic data communications between system...

Code of Federal Regulations, 2013 CFR

2013-04-01

... data communications between system components? 547.15 Section 547.15 Indians NATIONAL INDIAN GAMING... AND EQUIPMENT § 547.15 What are the minimum technical standards for electronic data communications between system components? (a) Sensitive data. Communication of sensitive data must be secure from...

25 CFR 547.15 - What are the minimum technical standards for electronic data communications between system...

Code of Federal Regulations, 2014 CFR

2014-04-01

... data communications between system components? 547.15 Section 547.15 Indians NATIONAL INDIAN GAMING... AND EQUIPMENT § 547.15 What are the minimum technical standards for electronic data communications between system components? (a) Sensitive data. Communication of sensitive data must be secure from...

UV emissions from artificial tanning devices and their compliance with the European technical standard.

PubMed

Facta, Stefania; Fusette, Stefania Saudino; Bonino, Alessandro; Anglesio, Laura; d'Amore, Giovanni

2013-04-01

Use of ultraviolet radiation-emitting tanning devices has been classified as "carcinogenic to humans" (group 1) by the International Agency for Research on Cancer. Following this classification, the knowledge of typical ultraviolet emission levels from tanning devices can be of interest for evaluating their impact on health. In this work, the results of an extensive measurement campaign on artificial tanning appliances are presented. Ultraviolet emissions from 94 tanning appliances produced by 15 different manufacturers were characterized by onsite spectroradiometric measurements. The measured radiometric quantities were compared with reference values fixed in the European technical standard EN 60335-2-27 "Household and similar electrical appliances-Safety. Part 2: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation." Measurement results indicate that 88% of the examined appliances had ultraviolet emissions not compliant with the technical standard. Among the considered appliances, tanning devices equipped with low pressure lamps showed higher ultraviolet levels of effective irradiance and less compliance with standard requirements. In particular, UV emissions from 100% of low pressure appliances and from 78% of high pressure appliances exceeded the irradiance limit of 0.3 Wm set by the European technical standard.

Technical Options for Energy Conservation in Buildings. National Conference of States on Building Codes and Standards and National Bureau of Standards Joint Emergency Workshop on Energy Conservation in Buildings. (Washington, D.C., June 19, 1973) NBS Technical Note 789.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC. Inst. for Applied Technology.

The purpose of this report is to provide reference material on the technical options for energy conservation in buildings. Actions pertinent to existing buildings and new buildings are considered separately. Regarding existing buildings, principal topics include summer cooling, winter heating, and other energy-related features such as insulation,…

Technical Skill Attainment and Post-Program Outcomes: An Analysis of Pennsylvania Secondary Career and Technical Education Graduates

ERIC Educational Resources Information Center

Staklis, Sandra; Klein, Steven

2010-01-01

Since the mid-1990s, the Pennsylvania Department of Education (PDE) has required all students concentrating in career and technical education (CTE) programs to complete a standardized technical skill assessment at or near the end of their program. Results of technical skill assessments are used for a number of purposes, including recognizing…

[Implementation of the technical requirements of the UNE-EN-ISO 15189 quality standard in a mycobacterial laboratory].

PubMed

Guna Serrano, M del Remedio; Ocete Mochón, M Dolores; Lahiguera, M José; Bresó, M Carmen; Gimeno Cardona, Concepción

2013-02-01

The UNE-EN-ISO 15189:2007 standard defines the requirements for quality and competence that must be met by medical laboratories. These laboratories should use this international standard to develop their own quality management systems and to evaluate their own competencies; in turn, this standard will be used by accreditation bodies to confirm or recognize the laboratories' competence. In clinical microbiology laboratories, application of the standard implies the implementation of the technical and specific management requirements that must be met to achieve optimal quality when carrying out microbiological tests. In Spain, accreditation is granted by the Spanish Accreditation Body (Entidad Nacional de Acreditación). This review aims to discuss the practical application of the standard's technical requirements in mycobacterial laboratory. Firstly, we define the scope of accreditation. Secondly, we specify how the items of the standard on personnel management, control of equipment, environmental facilities, method validation, internal controls and customer satisfaction surveys were developed and implemented in our laboratory. Copyright © 2013 Elsevier España, S.L. All rights reserved.

Defining Medical Levels of Care for Exploration Missions

NASA Technical Reports Server (NTRS)

Hailey, M.; Reyes, D.; Urbina, M.; Rubin, D.; Antonsen, E.

2017-01-01

NASA medical care standards establish requirements for providing health and medical programs for crewmembers during all phases of a mission. These requirements are intended to prevent or mitigate negative health consequences of long-duration spaceflight, thereby optimizing crew health and performance over the course of the mission. Current standards are documented in the two volumes of the NASA-STD-3001 Space Flight Human-System Standard document, established by the Office of the Chief Health and Medical Officer. Its purpose is to provide uniform technical standards for the design, selection, and application of medical hardware, software, processes, procedures, practices, and methods for human-rated systems. NASA-STD-3001 Vol. 1 identifies five levels of care for human spaceflight. These levels of care are accompanied by several components that illustrate the type of medical care expected for each. The Exploration Medical Capability (ExMC) of the Human Research Program has expanded the context of these provided levels of care and components. This supplemental information includes definitions for each component of care and example actions that describe the type of capabilities that coincide with the definition. This interpretation is necessary in order to fully and systematically define the capabilities required for each level of care in order to define the medical requirements and plan for infrastructure needed for medical systems of future exploration missions, such as one to Mars.

Technical Standards and Deaf and Hard of Hearing Medical School Applicants and Students: Interrogating Sensory Capacity and Practice Capacity.

PubMed

Argenyi, Michael

2016-10-01

Applicants to medical schools who are deaf and hard of hearing (DHoH) or who have other disabilities face significant barriers to medical school admission. One commonly cited barrier to admission is medical schools' technical standards (TS) for admission, advancement, and graduation. Ethical values of diversity and equity support altering the technical standards to be more inclusive of people with disabilities. Incorporating these values into admissions, advancement, and graduation considerations for DHoH and other students with disabilities can contribute to the physician workforce being more representative of the diverse patients it serves and better able to care for them. © 2016 American Medical Association. All Rights Reserved.

Explicit integration with GPU acceleration for large kinetic networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brock, Benjamin; Computer Science and Mathematics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37830; Belt, Andrew

2015-12-01

We demonstrate the first implementation of recently-developed fast explicit kinetic integration algorithms on modern graphics processing unit (GPU) accelerators. Taking as a generic test case a Type Ia supernova explosion with an extremely stiff thermonuclear network having 150 isotopic species and 1604 reactions coupled to hydrodynamics using operator splitting, we demonstrate the capability to solve of order 100 realistic kinetic networks in parallel in the same time that standard implicit methods can solve a single such network on a CPU. This orders-of-magnitude decrease in computation time for solving systems of realistic kinetic networks implies that important coupled, multiphysics problems inmore » various scientific and technical fields that were intractable, or could be simulated only with highly schematic kinetic networks, are now computationally feasible.« less

75 FR 61478 - Mandatory Reliability Standards for the Bulk Power System; Notice Allowing Post-Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-05

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket Nos. RM06-16-010; RM06-16-011] Mandatory Reliability Standards for the Bulk Power System; Notice Allowing Post-Technical Conference Comments September 24, 2010. On September 23, 2010, the Federal Energy Regulatory Commission conducted a...

45 CFR 162.1402 - Standards for health care claim status transaction.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Electronic Data Interchange Technical Report Type 3, April 2008, ASC X12N/005010X212E1. (Incorporated by.... 162.1402 Section 162.1402 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES ADMINISTRATIVE DATA... paragraph (a) of this section; and (2) The ASC X12 Standards for Electronic Data Interchange Technical...

Virginia "Standards of Learning" Assessments. Technical Report: 2003-2004 Administration

ERIC Educational Resources Information Center

Virginia Department of Education, 2005

2005-01-01

The purpose of this report is to inform users and other interested parties about the development, content and technical characteristics of the Virginia Standards of Learning (SOL) assessments. It provides information for the 2003 "SOL" cycle that comprises the fall 2003 and spring 2004 administrations. The report is divided into three…

76 FR 3142 - Release of Exposure Draft Technical Bulletins; Accounting for Oil and Gas Resources and Federal...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-19

... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Release of Exposure Draft Technical Bulletins; Accounting for Oil and Gas Resources and Federal Natural Resources Other Than Oil and Gas AGENCY: Federal Accounting Standards Advisory Board. ACTION: Notice. Board Action: Pursuant to 31 U.S.C. 3511(d), the Federal...

Investigating Employability: A Study to Ascertain Whether Attaining Stackable Credentials Increases Opportunity for Employment for Career Technical Graduates

ERIC Educational Resources Information Center

Whittington, Amy Green

2017-01-01

Career technical education plays an important part in the mission of community colleges--providing educational opportunities needed by members of their communities. Career technical programs prepare students for entry into the workforce. Accountability standards for career technical programs, from local, state, and federal bodies, monitor…

Building code compliance and enforcement: The experience of San Francisco's residential energy conservation ordinance and California's building standards for new construction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vine, E.

1990-11-01

As part of Lawrence Berkeley Laboratory's (LBL) technical assistance to the Sustainable City Project, compliance and enforcement activities related to local and state building codes for existing and new construction were evaluated in two case studies. The analysis of the City of San Francisco's Residential Energy Conservation Ordinance (RECO) showed that a limited, prescriptive energy conservation ordinance for existing residential construction can be enforced relatively easily with little administrative costs, and that compliance with such ordinances can be quite high. Compliance with the code was facilitated by extensive publicity, an informed public concerned with the cost of energy and knowledgeablemore » about energy efficiency, the threat of punishment (Order of Abatement), the use of private inspectors, and training workshops for City and private inspectors. The analysis of California's Title 24 Standards for new residential and commercial construction showed that enforcement of this type of code for many climate zones is more complex and requires extensive administrative support for education and training of inspectors, architects, engineers, and builders. Under this code, prescriptive and performance approaches for compliance are permitted, resulting in the demand for alternative methods of enforcement: technical assistance, plan review, field inspection, and computer analysis. In contrast to existing to construction, building design and new materials and construction practices are of critical importance in new construction, creating a need for extensive technical assistance and extensive interaction between enforcement personnel and the building community. Compliance problems associated with building design and installation did occur in both residential and nonresidential buildings. 12 refs., 5 tabs.« less

77 FR 56743 - Federal Acquisition Regulation; Technical Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-13

... Regulation; Technical Amendments AGENCY: Department of Defense (DoD), General Services Administration (GSA... publication schedules. Please cite FAC 2005-61, Technical Amendments. SUPPLEMENTARY INFORMATION: In order to...

78 FR 6191 - Federal Acquisition Regulation; Technical Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-29

... Regulation; Technical Amendments AGENCY: Department of Defense (DoD), General Services Administration (GSA... publication schedules. Please cite FAC 2005-65, Technical Amendments. SUPPLEMENTARY INFORMATION: In order to...

Fluoroscopic removal of retrievable self-expandable metal stents in patients with malignant oesophageal strictures: Experience with a non-endoscopic removal system.

PubMed

Kim, Pyeong Hwa; Song, Ho-Young; Park, Jung-Hoon; Zhou, Wei-Zhong; Na, Han Kyu; Cho, Young Chul; Jun, Eun Jung; Kim, Jun Ki; Kim, Guk Bae

2017-03-01

To evaluate clinical outcomes of fluoroscopic removal of retrievable self-expandable metal stents (SEMSs) for malignant oesophageal strictures, to compare clinical outcomes of three different removal techniques, and to identify predictive factors of successful removal by the standard technique (primary technical success). A total of 137 stents were removed from 128 patients with malignant oesophageal strictures. Primary overall technical success and removal-related complications were evaluated. Logistic regression models were constructed to identify predictive factors of primary technical success. Primary technical success rate was 78.8 % (108/137). Complications occurred in six (4.4 %) cases. Stent location in the upper oesophagus (P=0.004), stricture length over 8 cm (P=0.030), and proximal granulation tissue (P<0.001) were negative predictive factors of primary technical success. If granulation tissue was present at the proximal end, eversion technique was more frequently required (P=0.002). Fluoroscopic removal of retrievable SEMSs for malignant oesophageal strictures using three different removal techniques appeared to be safe and easy. The standard technique is safe and effective in the majority of patients. The presence of proximal granulation tissue, stent location in the upper oesophagus, and stricture length over 8 cm were negative predictive factors for primary technical success by standard extraction and may require a modified removal technique. • Fluoroscopic retrievable SEMS removal is safe and effective. • Standard removal technique by traction is effective in the majority of patients. • Three negative predictive factors of primary technical success were identified. • Caution should be exercised during the removal in those situations. • Eversion technique is effective in cases of proximal granulation tissue.

Hydrogen monitoring requirements in the global technical regulation on hydrogen and fuel cell vehicles

DOE PAGES

Buttner, William; Rivkin, C.; Burgess, R.; ...

2017-02-04

Here, the United Nations Economic Commission for Europe Global Technical Regulation (GTR) Number 13 ( Global Technical Regulation on Hydrogen and Fuel Cell Vehicles) is the defining document regulating safety requirements in hydrogen vehicles, and in particular, fuel cell electric vehicles (FCEVs). GTR Number 13 has been formally adopted and will serve as the basis for the national regulatory standards for FCEV safety in North America (led by the United States), Japan, Korea, and the European Union. The GTR defines safety requirements for these vehicles, including specifications on the allowable hydrogen levels in vehicle enclosures during in-use and post-crash conditionsmore » and on the allowable hydrogen emissions levels in vehicle exhaust during certain modes of normal operation. However, in order to be incorporated into national regulations, that is, to be legally binding, methods to verify compliance with the specific requirements must exist. In a collaborative program, the Sensor Laboratories at the National Renewable Energy Laboratory in the United States and the Joint Research Centre, Institute for Energy and Transport in the Netherlands have been evaluating and developing analytical methods that can be used to verify compliance with the hydrogen release requirements as specified in the GTR.« less

77 FR 31499 - Medicaid and Children's Health Insurance Programs; Disallowance of Claims for FFP and Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-29

...This final rule reflects the Centers for Medicare & Medicaid Services' commitment to the general principles of the President's Executive Order 13563 released January 18, 2011, entitled ``Improving Regulation and Regulatory Review.'' This rule will: implement a new reconsideration process for administrative determinations to disallow claims for Federal financial participation (FFP) under title XIX of the Act (Medicaid); lengthen the time States have to credit the Federal government for identified but uncollected Medicaid provider overpayments and provide that interest will be due on amounts not credited within that time period; make conforming changes to the Medicaid and Children's Health Insurance Program (CHIP) disallowance process to allow States the option to retain disputed Federal funds through the new administrative reconsideration process; revise installment repayment standards and schedules for States that owe significant amounts; and provide that interest charges may accrue during the new administrative reconsideration process if a State chooses to retain the funds during that period. This final rule will also make a technical correction to reporting requirements for disproportionate share hospital payments, revise internal delegations of authority to reflect the term ``Administrator or current Designee,'' remove obsolete language, and correct other technical errors.

Industrial Fuel Gas Demonstration Plant Program. Bid packages for materials (Deliverable No. 28)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1979-01-01

Fixed-price supply type bid packages for materials and/or service essentially are comprised of two parts, namely: (1) a technical requisition of the material, equipment, or service to be supplied; and (2) commercial and legal requirements, normally referred to as terms and conditions. Requisitions, providing technical requirements, for all equipment items identified for the Industrial Fuel Gas Demonstration Plant may be found in the 12 volumes of the Demonstration Plant Mechanical Design. The requisitions have been included within separate sections of the design report, sorted by appropriate plant unit. Combined with any General Notes Requisition and the necessary FWEC Job Standards,more » these various item requisitions provide all technical information for the prospective vendor to furnish his bid. The terms and conditions (boiler plate) to be included in the bid package identify all the contractual requirements which will be imposed upon the bidder. These requirements cover the conditions he must meet to bid on the particular item as well as the clauses to be included within the eventual purchase order/subcontract. A typical package of such terms and conditions is included.« less

EDI and the Technical Communicator.

ERIC Educational Resources Information Center

Eiler, Mary Ann

1994-01-01

Assesses the role of technical communicators in electronic data interchange (EDI). Argues that, as experts in information design, human factors, instructional theory, and professional writing, technical communicators should be advocates of standard documentation protocols and should rethink the traditional concepts of "document" to…

Engineering and Technical Education in Russia, in Numbers

ERIC Educational Resources Information Center

Aref'ev, A. L.; Aref'ev, M. A.

2013-01-01

An analysis of the main tendencies in the development of engineering and technical education in Russia during the last 100 years shows that earlier strengths have been lost, and that currently technical education in Russia is far behind modern world standards.

[The Humanitarian Charter and minimum standards in humanitarian response are applicable in German refugee facilities].

PubMed

Gardemann, Joachim; Wilp, Thomas

2016-05-01

In recent refugee migration into Germany the responsibilities and reactions of health authorities are still lacking general co-ordination. Can the ethical and technical standards of international humanitarian assistance serve as an appropriate and even a compulsory guideline for relief agencies, public health and regulatory authorities in Germany? Documents from the field of medical ethics, medical law, international humanitarian law and disaster medicine will be examined and checked for practicability by consulting experiences during the 1990s Balkan wars refugee movement and international missions of relief agencies. Ethical and technical standards of international humanitarian assistance have been developed, improved and evaluated for 20 years, and are valuable tools for emergency management. Victims of disaster or conflict have a right to live in dignity and therefore have a right to receive health care according to international standards. International ethical and technical standards for refugees should be considered in the Federal Republic of Germany like in any other country.

47 CFR 25.214 - Technical requirements for space stations in the Satellite Digital Audio Radio Service and...

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 2 2014-10-01 2014-10-01 false Technical requirements for space stations in the Satellite Digital Audio Radio Service and associated terrestrial repeaters. 25.214 Section 25.214... Technical Standards § 25.214 Technical requirements for space stations in the Satellite Digital Audio Radio...

47 CFR 25.214 - Technical requirements for space stations in the satellite digital audio radio service and...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 2 2012-10-01 2012-10-01 false Technical requirements for space stations in the satellite digital audio radio service and associated terrestrial repeaters. 25.214 Section 25.214... Technical Standards § 25.214 Technical requirements for space stations in the satellite digital audio radio...

47 CFR 25.214 - Technical requirements for space stations in the satellite digital audio radio service and...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 2 2011-10-01 2011-10-01 false Technical requirements for space stations in the satellite digital audio radio service and associated terrestrial repeaters. 25.214 Section 25.214... Technical Standards § 25.214 Technical requirements for space stations in the satellite digital audio radio...

47 CFR 25.214 - Technical requirements for space stations in the Satellite Digital Audio Radio Service and...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 2 2013-10-01 2013-10-01 false Technical requirements for space stations in the Satellite Digital Audio Radio Service and associated terrestrial repeaters. 25.214 Section 25.214... Technical Standards § 25.214 Technical requirements for space stations in the Satellite Digital Audio Radio...

47 CFR 25.214 - Technical requirements for space stations in the satellite digital audio radio service and...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Technical requirements for space stations in the satellite digital audio radio service and associated terrestrial repeaters. 25.214 Section 25.214... Technical Standards § 25.214 Technical requirements for space stations in the satellite digital audio radio...

25 CFR 547.14 - What are the minimum technical standards for electronic random number generation?

Code of Federal Regulations, 2011 CFR

2011-04-01

... CLASS II GAMES § 547.14 What are the minimum technical standards for electronic random number generation... rules of the game. For example, if a bingo game with 75 objects with numbers or other designations has a... serial correlation (outcomes shall be independent from the previous game); and (x) Test on subsequences...

25 CFR 547.9 - What are the minimum technical standards for Class II gaming system accounting functions?

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF CLASS II GAMES § 547.9 What are the minimum technical standards for Class II gaming system... digits to accommodate the design of the game. (3) Accounting data displayed to the player may be... audit, configuration, recall and test modes; or (ii) Temporarily, during entertaining displays of game...

25 CFR 547.9 - What are the minimum technical standards for Class II gaming system accounting functions?

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF CLASS II GAMES § 547.9 What are the minimum technical standards for Class II gaming system... digits to accommodate the design of the game. (3) Accounting data displayed to the player may be... audit, configuration, recall and test modes; or (ii) Temporarily, during entertaining displays of game...

25 CFR 547.7 - What are the minimum technical hardware standards applicable to Class II gaming systems?

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF CLASS II GAMES § 547.7 What are the minimum technical hardware standards applicable to Class II... the game, and are specially manufactured or proprietary and not off-the-shelf, shall display a unique... outcome or integrity of any game, progressive award, financial instrument, cashless transaction, voucher...

25 CFR 547.9 - What are the minimum technical standards for Class II gaming system accounting functions?

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF CLASS II GAMES § 547.9 What are the minimum technical standards for Class II gaming system... digits to accommodate the design of the game. (3) Accounting data displayed to the player may be... audit, configuration, recall and test modes; or (ii) Temporarily, during entertaining displays of game...

25 CFR 547.7 - What are the minimum technical hardware standards applicable to Class II gaming systems?

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF CLASS II GAMES § 547.7 What are the minimum technical hardware standards applicable to Class II... the game, and are specially manufactured or proprietary and not off-the-shelf, shall display a unique... outcome or integrity of any game, progressive award, financial instrument, cashless transaction, voucher...

25 CFR 547.14 - What are the minimum technical standards for electronic random number generation?

Code of Federal Regulations, 2012 CFR

2012-04-01

... CLASS II GAMES § 547.14 What are the minimum technical standards for electronic random number generation... rules of the game. For example, if a bingo game with 75 objects with numbers or other designations has a... serial correlation (outcomes shall be independent from the previous game); and (x) Test on subsequences...

25 CFR 547.14 - What are the minimum technical standards for electronic random number generation?

Code of Federal Regulations, 2010 CFR

2010-04-01

... CLASS II GAMES § 547.14 What are the minimum technical standards for electronic random number generation... rules of the game. For example, if a bingo game with 75 objects with numbers or other designations has a... serial correlation (outcomes shall be independent from the previous game); and (x) Test on subsequences...

25 CFR 547.7 - What are the minimum technical hardware standards applicable to Class II gaming systems?

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF CLASS II GAMES § 547.7 What are the minimum technical hardware standards applicable to Class II... the game, and are specially manufactured or proprietary and not off-the-shelf, shall display a unique... outcome or integrity of any game, progressive award, financial instrument, cashless transaction, voucher...

Montana Standards and Guidelines for Career and Vocational/Technical Education. Summer 2002 Update.

ERIC Educational Resources Information Center

Montana State Office of Public Instruction, Helena.

This document presents Montana's standards and guidelines for career and vocational/technical education (CVTE). The guide begins with a directory of Montana's key CVTE personnel and specialists. Part 1 presents the federal and state definitions of CVTE and provides an overview of Montana's system for delivering CVTE and its philosophy regarding…

The Uses and Misuses of Test Scores: Technical Assistance Perspective.

ERIC Educational Resources Information Center

Echternacht, Gary

The uses and misuses of standardized test results used for program evaluation as seen by a staff member of an Elementary Secondary Education Act (ESEA) Title I Technical Assistance Center are described. In ESEA Title I, test scores are used to select students for the program. Although federal requirements do not require using standardized test…

Interim Joint Technical Assessment Report: Light-Duty Vehicle Greenhouse Gas Emission Standards and Corporate Average Fuel Economy Standards for Model Years 2017-2025

EPA Pesticide Factsheets

EPA and the NHTSA collaborated with CARB on this joint Technical Assessment Report to build on the success of the first phase of the National Program to regulate fuel economy and greenhouse gas (GHG) emissions from U.S. light-duty vehicles.

Foundations for Excellence in the Chemical Process Industries. Voluntary Industry Standards for Chemical Process Industries Technical Workers.

ERIC Educational Resources Information Center

Hofstader, Robert; Chapman, Kenneth

This document discusses the Voluntary Industry Standards for Chemical Process Industries Technical Workers Project and issues of relevance to the education and employment of chemical laboratory technicians (CLTs) and process technicians (PTs). Section 1 consists of the following background information: overview of the chemical process industries,…

A Formal Semantics for the WS-BPEL Recovery Framework

NASA Astrophysics Data System (ADS)

Dragoni, Nicola; Mazzara, Manuel

While current studies on Web services composition are mostly focused - from the technical viewpoint - on standards and protocols, this work investigates the adoption of formal methods for dependable composition. The Web Services Business Process Execution Language (WS-BPEL) - an OASIS standard widely adopted both in academic and industrial environments - is considered as a touchstone for concrete composition languages and an analysis of its ambiguous Recovery Framework specification is offered. In order to show the use of formal methods, a precise and unambiguous description of its (simplified) mechanisms is provided by means of a conservative extension of the π-calculus. This has to be intended as a well known case study providing methodological arguments for the adoption of formal methods in software specification. The aspect of verification is not the main topic of the paper but some hints are given.

[Recommendations for the control of documents and the establishment of a documentary system].

PubMed

Vinner, E

2013-06-01

The quality management system that must be implemented in a MBL to meet the requirements of the standard NF EN ISO 15189 is based, among other things, on the creation and use by staff of a documentary system approved and updated. This documentary system is constituted by external documents (standards, suppliers' documents...) and internal documents (quality manual, procedures, instructions, technical and quality recordings...). A procedure of the documentary system control must be formalized. The documentary system should be modeled in order to identify the various procedures to be drafted and the incurred risks in the case a document would be missing in this system. Each document must be indexed in a unique way and document management must be carried out rigorously. The use of document management software is a great help to manage the life cycle of documents.

Benefit Analysis Report, United States Air Force Technical Order Management Systems (AFTOMS)

DOT National Transportation Integrated Search

1989-08-01

This report prepared by the Transportation Systems Center (TSC) concludes an analysis of the Technical Order (TO) costs and benefits, which was originally undertaken as part of the US Air Force Computer-aided Acquisition and Logistics Support (CALS) ...

Using ISO 25040 standard for evaluating electronic health record systems.

PubMed

Oliveira, Marília; Novaes, Magdala; Vasconcelos, Alexandre

2013-01-01

Quality of electronic health record systems (EHR-S) is one of the key points in the discussion about the safe use of this kind of system. It stimulates creation of technical standards and certifications in order to establish the minimum requirements expected for these systems. [1] In other side, EHR-S suppliers need to invest in evaluation of their products to provide systems according to these requirements. This work presents a proposal of use ISO 25040 standard, which focuses on the evaluation of software products, for define a model of evaluation of EHR-S in relation to Brazilian Certification for Electronic Health Record Systems - SBIS-CFM Certification. Proposal instantiates the process described in ISO 25040 standard using the set of requirements that is scope of the Brazilian certification. As first results, this research has produced an evaluation model and a scale for classify an EHR-S about its compliance level in relation to certification. This work in progress is part for the acquisition of the degree of master in Computer Science at the Federal University of Pernambuco.

48 CFR 935.010 - Scientific and technical reports.

Code of Federal Regulations, 2013 CFR

2013-10-01

... information. The DOE Order 241.1B Scientific and Technical Information Management, or its successor version... conveyed in scientific and technical information (STI) shall include an instruction requiring the.... Department of Energy (DOE), Office of Scientific and Technical Information (OSTI), using the DOE Energy Link...

48 CFR 935.010 - Scientific and technical reports.

Code of Federal Regulations, 2011 CFR

2011-10-01

... information. The DOE Order 241.1B Scientific and Technical Information Management, or its successor version... conveyed in scientific and technical information (STI) shall include an instruction requiring the.... Department of Energy (DOE), Office of Scientific and Technical Information (OSTI), using the DOE Energy Link...

48 CFR 935.010 - Scientific and technical reports.

Code of Federal Regulations, 2010 CFR

2010-10-01

... information. The DOE Order 241.1B Scientific and Technical Information Management, or its successor version... conveyed in scientific and technical information (STI) shall include an instruction requiring the.... Department of Energy (DOE), Office of Scientific and Technical Information (OSTI), using the DOE Energy Link...

48 CFR 935.010 - Scientific and technical reports.

Code of Federal Regulations, 2012 CFR

2012-10-01

... information. The DOE Order 241.1B Scientific and Technical Information Management, or its successor version... conveyed in scientific and technical information (STI) shall include an instruction requiring the.... Department of Energy (DOE), Office of Scientific and Technical Information (OSTI), using the DOE Energy Link...

48 CFR 935.010 - Scientific and technical reports.

Code of Federal Regulations, 2014 CFR

2014-10-01

... information. The DOE Order 241.1B Scientific and Technical Information Management, or its successor version... conveyed in scientific and technical information (STI) shall include an instruction requiring the.... Department of Energy (DOE), Office of Scientific and Technical Information (OSTI), using the DOE Energy Link...

Relational Study of Technical Education in Scotland and Nigeria for Sustainable Skill Development

ERIC Educational Resources Information Center

Umunadi, E. Kennedy

2014-01-01

This paper was designed to look at technical education curriculum and mode of implementation in Scotland in order to adopt the advantageous attributes of the Scottish technical education in Nigeria. The paper x-rayed the staff perceptions of technical education and its roles in Scotland; history of technical education before the advent of British…

Quantitative imaging biomarkers: Effect of sample size and bias on confidence interval coverage.

PubMed

Obuchowski, Nancy A; Bullen, Jennifer

2017-01-01

Introduction Quantitative imaging biomarkers (QIBs) are being increasingly used in medical practice and clinical trials. An essential first step in the adoption of a quantitative imaging biomarker is the characterization of its technical performance, i.e. precision and bias, through one or more performance studies. Then, given the technical performance, a confidence interval for a new patient's true biomarker value can be constructed. Estimating bias and precision can be problematic because rarely are both estimated in the same study, precision studies are usually quite small, and bias cannot be measured when there is no reference standard. Methods A Monte Carlo simulation study was conducted to assess factors affecting nominal coverage of confidence intervals for a new patient's quantitative imaging biomarker measurement and for change in the quantitative imaging biomarker over time. Factors considered include sample size for estimating bias and precision, effect of fixed and non-proportional bias, clustered data, and absence of a reference standard. Results Technical performance studies of a quantitative imaging biomarker should include at least 35 test-retest subjects to estimate precision and 65 cases to estimate bias. Confidence intervals for a new patient's quantitative imaging biomarker measurement constructed under the no-bias assumption provide nominal coverage as long as the fixed bias is <12%. For confidence intervals of the true change over time, linearity must hold and the slope of the regression of the measurements vs. true values should be between 0.95 and 1.05. The regression slope can be assessed adequately as long as fixed multiples of the measurand can be generated. Even small non-proportional bias greatly reduces confidence interval coverage. Multiple lesions in the same subject can be treated as independent when estimating precision. Conclusion Technical performance studies of quantitative imaging biomarkers require moderate sample sizes in order to provide robust estimates of bias and precision for constructing confidence intervals for new patients. Assumptions of linearity and non-proportional bias should be assessed thoroughly.

The Global Genome Biodiversity Network (GGBN) Data Standard specification.

PubMed

Droege, G; Barker, K; Seberg, O; Coddington, J; Benson, E; Berendsohn, W G; Bunk, B; Butler, C; Cawsey, E M; Deck, J; Döring, M; Flemons, P; Gemeinholzer, B; Güntsch, A; Hollowell, T; Kelbert, P; Kostadinov, I; Kottmann, R; Lawlor, R T; Lyal, C; Mackenzie-Dodds, J; Meyer, C; Mulcahy, D; Nussbeck, S Y; O'Tuama, É; Orrell, T; Petersen, G; Robertson, T; Söhngen, C; Whitacre, J; Wieczorek, J; Yilmaz, P; Zetzsche, H; Zhang, Y; Zhou, X

2016-01-01

Genomic samples of non-model organisms are becoming increasingly important in a broad range of studies from developmental biology, biodiversity analyses, to conservation. Genomic sample definition, description, quality, voucher information and metadata all need to be digitized and disseminated across scientific communities. This information needs to be concise and consistent in today's ever-increasing bioinformatic era, for complementary data aggregators to easily map databases to one another. In order to facilitate exchange of information on genomic samples and their derived data, the Global Genome Biodiversity Network (GGBN) Data Standard is intended to provide a platform based on a documented agreement to promote the efficient sharing and usage of genomic sample material and associated specimen information in a consistent way. The new data standard presented here build upon existing standards commonly used within the community extending them with the capability to exchange data on tissue, environmental and DNA sample as well as sequences. The GGBN Data Standard will reveal and democratize the hidden contents of biodiversity biobanks, for the convenience of everyone in the wider biobanking community. Technical tools exist for data providers to easily map their databases to the standard.Database URL: http://terms.tdwg.org/wiki/GGBN_Data_Standard. © The Author(s) 2016. Published by Oxford University Press.

15 CFR 296.32 - Technical and educational services.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Technical and educational services... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM Dissemination of Program Results § 296.32 Technical and educational services. (a) Under...

ERLN Technical Support for Labs

EPA Pesticide Factsheets

The Environmental Response Laboratory Network provides policies and guidance on lab and data requirements, Standardized Analytical Methods, and technical support for water and radiological sampling and analysis

Technical Assistance Needs Assessments (TANAs)

EPA Pesticide Factsheets

The Technical Assistance Needs Assessment (TANA) is a process to identify whether a community requires additional support from EPA in order to understand technical information and have meaningful participation in the Superfund decision-making process.

25 CFR 547.8 - What are the minimum technical software standards applicable to Class II gaming systems?

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF CLASS II GAMES § 547.8 What are the minimum technical software standards applicable to Class II... of Class II games. (a) Player interface displays. (1) If not otherwise provided to the player, the player interface shall display the following: (i) The purchase or wager amount; (ii) Game results; and...

25 CFR 547.12 - What are the minimum technical standards for downloading on a Class II gaming system?

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF CLASS II GAMES § 547.12 What are the minimum technical standards for downloading on a Class II... software, files, data, and prize schedules. (2) Downloads of software, games, prize schedules, or other... performed in a manner that will not affect game play. (5) Downloads shall not affect the integrity of...

25 CFR 547.12 - What are the minimum technical standards for downloading on a Class II gaming system?

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF CLASS II GAMES § 547.12 What are the minimum technical standards for downloading on a Class II... software, files, data, and prize schedules. (2) Downloads of software, games, prize schedules, or other... performed in a manner that will not affect game play. (5) Downloads shall not affect the integrity of...

25 CFR 547.8 - What are the minimum technical software standards applicable to Class II gaming systems?

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF CLASS II GAMES § 547.8 What are the minimum technical software standards applicable to Class II... of Class II games. (a) Player interface displays. (1) If not otherwise provided to the player, the player interface shall display the following: (i) The purchase or wager amount; (ii) Game results; and...

25 CFR 547.8 - What are the minimum technical software standards applicable to Class II gaming systems?

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF CLASS II GAMES § 547.8 What are the minimum technical software standards applicable to Class II... of Class II games. (a) Player interface displays. (1) If not otherwise provided to the player, the player interface shall display the following: (i) The purchase or wager amount; (ii) Game results; and...

25 CFR 547.12 - What are the minimum technical standards for downloading on a Class II gaming system?

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF CLASS II GAMES § 547.12 What are the minimum technical standards for downloading on a Class II... software, files, data, and prize schedules. (2) Downloads of software, games, prize schedules, or other... performed in a manner that will not affect game play. (5) Downloads shall not affect the integrity of...

The Degree of Implementing ISTE Standards in Technical Education Colleges of Palestine

ERIC Educational Resources Information Center

Ayad, Fuad Ismail; Ajrami, Sameh Jamil

2017-01-01

In light of this successive technological change, there has been an ongoing need for the development of technical education, so that the graduate is able to keep up with the requirements of the labor market on the one hand, and has a continuing education skills on the other. International Society for Technology in Education (ISTE) standards are…

45 CFR 162.1402 - Standards for health care claim status transaction.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Electronic Data Interchange Technical Report Type 3, April 2008, ASC X12N/005010X212E1. (Incorporated by... paragraph (a) of this section; and (2) The ASC X12 Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim Status Request and Response (276/277), August 2006, ASC X12N/005010X212...

45 CFR 162.1402 - Standards for health care claim status transaction.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Electronic Data Interchange Technical Report Type 3, April 2008, ASC X12N/005010X212E1. (Incorporated by... paragraph (a) of this section; and (2) The ASC X12 Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim Status Request and Response (276/277), August 2006, ASC X12N/005010X212...

45 CFR 162.1402 - Standards for health care claim status transaction.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Electronic Data Interchange Technical Report Type 3, April 2008, ASC X12N/005010X212E1. (Incorporated by... paragraph (a) of this section; and (2) The ASC X12 Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim Status Request and Response (276/277), August 2006, ASC X12N/005010X212...

45 CFR 162.1402 - Standards for health care claim status transaction.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Electronic Data Interchange Technical Report Type 3, April 2008, ASC X12N/005010X212E1. (Incorporated by... paragraph (a) of this section; and (2) The ASC X12 Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim Status Request and Response (276/277), August 2006, ASC X12N/005010X212...

Common Core State Standards for Literacy in History/Social Studies, Science, and Technical Subjects for English Language Learners

ERIC Educational Resources Information Center

de Oliveira, Luciana C., Ed.

2016-01-01

This volume in the Common Core State Standards (CCSS) for English Language Learners series was designed to deepen teacher's knowledge and provides instructional approaches and practices for supporting grades 6-12 ELLs as they meet the ambitious expectations of the CCSS for Literacy in History/Social Studies, Science, and Technical Subjects. This…

IDEA Technical Report No. 4. Description of IDEA Standard Form Data Base.

ERIC Educational Resources Information Center

Cashin, William E.; Perrin, Bruce M.

The data and computational procedures used by the IDEA System to generate IDEA Reports from information collected on the Standard Form of the IDEA Survey Form are described in this technical report. The computations for each of the seven parts of the IDEA Report are explained. The data base used for this 1978-79 Kansas State University study…

The CORE Community: Career and Technical Education Teachers' Perceptions of the Common Core State Standards

ERIC Educational Resources Information Center

Stair, Kristin S.; Warner, Wendy J; Hock, Gaea; Conrad, Michelle; Levy, Natalie

2016-01-01

The Common Core State Standards (CCSS) have been adopted in 43 states within the U.S. However, Career and Technical Education (CTE) teachers are often unsure how their programs can successfully integrate CCSS. The purpose of this study was to understand how participants in a CCSS professional development project perceive the CCSS and how they are…

Explicit integration with GPU acceleration for large kinetic networks

DOE PAGES

Brock, Benjamin; Belt, Andrew; Billings, Jay Jay; ...

2015-09-15

In this study, we demonstrate the first implementation of recently-developed fast explicit kinetic integration algorithms on modern graphics processing unit (GPU) accelerators. Taking as a generic test case a Type Ia supernova explosion with an extremely stiff thermonuclear network having 150 isotopic species and 1604 reactions coupled to hydrodynamics using operator splitting, we demonstrate the capability to solve of order 100 realistic kinetic networks in parallel in the same time that standard implicit methods can solve a single such network on a CPU. In addition, this orders-of-magnitude decrease in computation time for solving systems of realistic kinetic networks implies thatmore » important coupled, multiphysics problems in various scientific and technical fields that were intractable, or could be simulated only with highly schematic kinetic networks, are now computationally feasible.« less

The Library Work Order Processing System: A New Approach to Motivate Employees and to Increase Production in the Technical Service Department of Mercer County Community College Library. Applied Educational Research and Evaluation.

ERIC Educational Resources Information Center

Sim, Yong Sup

After reviewing the current movement toward job enrichment, a system was designed for the technical services department of the Mercer County Community College Library. The Library Work Order Processing System, as tried between January and March, 1974, was designed to permit each worker more variety of jobs. The technical services department was…

Current situation of International Organization for Standardization/Technical Committee 249 international standards of traditional Chinese medicine.

PubMed

Liu, Yu-Qi; Wang, Yue-Xi; Shi, Nan-Nan; Han, Xue-Jie; Lu, Ai-Ping

2017-05-01

To review the current situation and progress of traditional Chinese medicine (TCM) international standards, standard projects and proposals in International Organization for Standardization (ISO)/ technical committee (TC) 249. ISO/TC 249 standards and standard projects on the ISO website were searched and new standard proposals information were collected from ISO/TC 249 National Mirror Committee in China. Then all the available data were summarized in 5 closely related items, including proposed time, proposed country, assigned working group (WG), current stage and classifification. In ISO/TC 249, there were 2 international standards, 18 standard projects and 24 new standard proposals proposed in 2014. These 44 standard subjects increased year by year since 2011. Twenty-nine of them were proposed by China, 15 were assigned to WG 4, 36 were in preliminary and preparatory stage and 8 were categorized into 4 fifields, 7 groups and sub-groups based on International Classifification Standards. A rapid and steady development of international standardization in TCM can be observed in ISO/TC 249.

The Defense Technical Information Center: Acquiring Information and Imparting Knowledge.

ERIC Educational Resources Information Center

Molholm, Kurt N.; And Others

1988-01-01

This overview of the Defense Technical Information Center (DTIC) discusses how DTIC fits into the Department of Defense Scientific and Technical Information Program; its history, organization, users, and operations; types of information handled; subject classification; cataloging standards; Information Analysis Centers (IACs); and research and…

48 CFR 227.7103-9 - Copyright.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF DEFENSE GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Technical Data 227.7103-9 Copyright. (a) Copyright license. (1) The clause at 252.227-7013, Rights in Technical Data... obtained under the clause. When non-standard license rights in technical data will be negotiated, negotiate...

77 FR 29247 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-17

...). ACTION: Final rule; technical amendments. SUMMARY: This final rule makes technical amendments to Federal... advanced air bag requirements. As written now, the general warning label requirements contain an explicit... equipment requirements for restraint systems. This document makes technical amendments to several of the...

NASA Publications Guide for Authors. Revised

NASA Technical Reports Server (NTRS)

2005-01-01

This document presents guidelines for use by NASA authors for preparing and publishing their scientific and technical information (STI). Section 1 gives an overview. Section 2 describes each type of report in the NASA STI Report Series and other forms of publications. It also discusses dissemination and safeguarding of STI. Section 3 gives technical, data quality, and dissemination reviews, including the mandatory review via NASA Form 1676, NASA Scientific and Technical Information (STI) Document Availability Authorization (DAA). It also describes handling unlimited and limited/restricted STI. Section 4 provides recommended standards for document format, composition, and organization and element of a typical report. Section 5 presents miscellaneous preparation recommendations. Section 6 discusses two required forms, Standard Form 298 and NF-1676. The guide cites additional sources of information of standards, guidelines, and review and approval requirements.

Career and Technical Education Administration: Requirements, Certification/Licensure, and Preparation

ERIC Educational Resources Information Center

Zirkle, Christopher J.; Jeffery, Jeremy O.

2017-01-01

The current climate of career and technical administration requirements in all 50 states was detailed and explored. An increasing number of states are not requiring specific career-technical administration certification/licensure in order to oversee secondary career and technical education (CTE) programs, with more states moving towards a general…

Current limitations into the application of virtual reality to mental health research.

PubMed

Huang, M P; Alessi, N E

1998-01-01

Virtual Reality (VR) environments have significant potential as a tool in mental health research, but are limited by technical factors and by mental health research factors. Technical difficulties include cost and complexity of virtual environment creation. Mental health research difficulties include current inadequacy of standards to specify needed details for virtual environment design. Technical difficulties are disappearing with technological advances, but the mental health research difficulties will take a concerted effort to overcome. Some of this effort will need to be directed at the formation of collaborative projects and standards for how such collaborations should proceed.

Research Institute for Technical Careers

NASA Technical Reports Server (NTRS)

Glenn, Ronald L.

1996-01-01

The NASA research grant to Wilberforce University enabled us to establish the Research Institute for Technical Careers (RITC) in order to improve the teaching of science and engineering at Wilberforce. The major components of the research grant are infrastructure development, establishment of the Wilberforce Intensive Summer Experience (WISE), and Joint Research Collaborations with NASA Scientists. (A) Infrastructure Development. The NASA grant has enabled us to improve the standard of our chemistry laboratory and establish the electronics, design, and robotics laboratories. These laboratories have significantly improved the level of instruction at Wilberforce University. (B) Wilberforce Intensive Summer Experience (WISE). The WISE program is a science and engineering bridge program for prefreshman students. It is an intensive academic experience designed to strengthen students' knowledge in mathematics, science, engineering, computing skills, and writing. (C) Joint Collaboration. Another feature of the grant is research collaborations between NASA Scientists and Wilberforce University Scientists. These collaborations have enabled our faculty and students to conduct research at NASA Lewis during the summer and publish research findings in various journals and scientific proceedings.

Consensus statement for use and technical requirements of thyroid ultrasound in endocrinology units.

PubMed

Martín-Hernández, Tomás; Díez Gómez, Juan José; Díaz-Soto, Gonzalo; Torres Cuadro, Alberto; Navarro González, Elena; Oleaga Alday, Amelia; Sambo Salas, Marcel; Reverter Calatayud, Jordi L; Argüelles Jiménez, Iñaki; Mancha Doblas, Isabel; Fernández García, Diego; Galofré, Juan Carlos

2017-03-01

Thyroid nodule detection has increased with widespread use of ultrasound, which is currently the main tool for detection, monitoring, diagnosis and, in some instances, treatment of thyroid nodules. Knowledge of ultrasound and adequate instruction on its use require a position statement by the scientific societies concerned. The working groups on thyroid cancer and ultrasound techniques of the Spanish Society of Endocrinology and Nutrition have promoted this document, based on a thorough analysis of the current literature, the results of multicenter studies and expert consensus, in order to set the requirements for the best use of ultrasound in clinical practice. The objectives include the adequate framework for use of thyroid ultrasound, the technical and legal requirements, the clinical situations in which it is recommended, the levels of knowledge and learning processes, the associated responsibility, and the establishment of a standardized reporting of results and integration into hospital information systems and endocrinology units. Copyright © 2017 SEEN. Publicado por Elsevier España, S.L.U. All rights reserved.

Occupational exposure of personnel operating military radio equipment: measurements and simulation.

PubMed

Paljanos, Annamaria; Miclaus, Simona; Munteanu, Calin

2015-09-01

Technical literature provides numerous studies concerning radiofrequency exposure measurements for various radio communication devices, but there are few studies related to exposure of personnel operating military radio equipment. In order to evaluate exposure and identify cases when safety requirements are not entirely met, both measurements and simulations are needed for accurate results. Moreover, given the technical characteristics of the radio devices used in the military, personnel mainly operate in the near-field region so both measurements and simulation becomes more complex. Measurements were made in situ using a broadband personal exposimeter equipped with two isotropic probes for both electric and magnetic components of the field. The experiment was designed for three different operating frequencies of the same radio equipment, while simulations were made in FEKO software using hybrid numerical methods to solve complex electromagnetic field problems. The paper aims to discuss the comparative results of the measurements and simulation, as well as comparing them to reference levels specified in military or civilian radiofrequency exposure standards.

Development of an Internet Security Policy for health care establishments.

PubMed

Ilioudis, C; Pangalos, G

2000-01-01

The Internet provides unprecedented opportunities for interaction and data sharing among health care providers, patients and researchers. However, the advantages provided by the Internet come with a significantly greater element of risk to the confidentiality and integrity of information. This paper defines the basic security requirements that must be addressed in order to use the Internet to safely transmit patient and/or other sensitive Health Care information. It describes a suitable Internet Security Policy for Health Care Establishments and provides the set of technical measures that are needed for its implementation. The proposed security policy and technical approaches have been based on an extensive study of the related recommendations from the security and standard groups both in EU amid USA and our related work and experience. The results have been utilized in the framework of the Intranet Health Clinic project, where the use of the Internet for the transmission of sensitive Health Care information is of vital importance.

7 CFR 36.2 - Initiating action on grade standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... the need for new or revised standards; (ii) Collect technical, marketing, or other appropriate data....2 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER...

[Investigation report on the technical standards of TCM diagnosis, treatment and rehabilitation equipment].

PubMed

Shen, Hua; Liu, Tangyi; Yang, Huayuan

2016-02-01

The questionnaire was adopted so as to investigate the attitudes and recognition of the manufacture eneprises of TCM diagnosis, treatment and rehabilitation equipment (DTRE) to the technical standards of, relevant products. It was found that the construction of the industrial standard and the national standard was lagged behind on TCM DTRE. Under the new situation, the enterprises are highly willing to participate in the development of the industrial, national and international standards and have a certain of understanding on the standard development. Nearly 80 % of enterprises believed that it was necessary to set up the relevant mirror organization for the development of industrial, national and international standard of TCM DITRE. In the future, the standard construction of TCM DTRE must face to the new situation. The constant increasing of the enterprises. and scientific research organizations in the standard construction must promote the development of TCM DTRE.

15 CFR 295.11 - Technical and educational services for ATP recipients.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS ADVANCED TECHNOLOGY PROGRAM General § 295.11 Technical and educational services for ATP recipients... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Technical and educational services for...

78 FR 63271 - Request for Public Comments to Compile the Report on Technical Barriers to Trade

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

... on Technical Barriers to Trade AGENCY: Office of the United States Trade Representative. ACTION... 2014 a Report on Technical Barriers to Trade (TBT Report) identifying and analyzing significant... requesting interested persons to submit written comments to assist it in identifying significant standards...

75 FR 19297 - Energy Conservation Program: Public Meeting and Availability of the Preliminary Technical Support...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-14

... Conservation Program: Public Meeting and Availability of the Preliminary Technical Support Document for Walk-In... and availability of the preliminary technical support document regarding energy conservation standards..., the deadline for requesting to speak at the public meeting, and the deadline for submitting written...

Problems of Technical Standards Teaching in the Context of the Globalization and Euro-Integration in Higher Education System of Ukraine

ERIC Educational Resources Information Center

Kornuta, Olena; Pryhorovska, Tetiana

2015-01-01

Globalization and Ukraine association with EU imply including Ukrainian universities into the world scientific space. The aim of this article is to analyze the problem of drawing standards teaching, based on the experience of Ivano-Frankivsk National Technical University of Oil and Gas (Ukraine) and to summarize the experience of post Soviet…

Environmental effects of dredging. Documentation of the efqual module for ADDAMS: Comparison of predicted effluent water quality with standards. Technical notes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palermo, M.R.; Schroeder, P.R.

This technical note describes a technique for comparison of the predicted quality of effluent discharged from confined dredged material disposal areas with applicable water quality standards. This note also serves as documentation of a computer program called EFQUAL written for that purpose as part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

The Ability of Standardized Test Instruments to Differentiate Membership in Different Vocational-Technical Curricula. Project MINI-SCORE, Final Technical Report.

ERIC Educational Resources Information Center

Pucel, David J.; And Others

Using post-secondary vocational education students as the populations, these two sub-studies of the Project MINI-SCORE sought to determine the extent to which pre-enrollment standardized test data can be used to predict vocational success. For the purpose of the study, vocational success was defined either as successful graduation or successful…

Researching College- and Career Ready Standards to Improve Student Outcomes: Technical Working Group Meeting. Meeting Summary (Washington, DC, August 19-20, 2013)

ERIC Educational Resources Information Center

Institute of Education Sciences, 2013

2013-01-01

In August, IES worked with the National Science Foundation and the Eunice Kennedy Shriver National Institute of Child Health and Human Development to convene a technical working group to discuss research objectives related to college- and career-ready standards in English language arts and mathematics. Forty people (including researchers,…

Determination of technical grade isocyanates used in the production of polyurethane plastics.

PubMed

Marand, Asa; Dahlin, Jakob; Karlsson, Daniel; Skarping, Gunnar; Dalene, Marianne

2004-07-01

A method for determination of technical grade isocyanates used in the production of polyurethane (PUR) is presented. The isocyanates in technical grade products were characterised as di-n-butylamine (DBA) derivatives using LC-MS and LC-chemiluminescent nitrogen detection (CLND) and the total isocyanate content was compared to a titration assay. For collection of isocyanates in air, an impinger-filter sampling technique with DBA as derivatisation reagent was used. Characterised DBA and nonadeuterium labelled DBA derivatives of isocyanates in technical products were used as calibration standards and internal standards, respectively, in the analysis of air samples. Three workplaces were studied where PUR products were produced either by spraying or by moulding. In both technical products and in air samples, a number of monomeric, oligomeric and prepolymeric isocyanates of e.g. methylenebisphenyl diisocyanate (MDI) and hexamethylene diisocyanate (HDI) were characterised. Several of these have not previously been described in workplace atmospheres. In the technical isocyanate products, between 69 and 102% of the NCO content determined by titration was accounted for by LC-CLND. Quantifications of a wide range of isocyanates in air samples were performed with correlation coefficients in the range 0.988-0.999 (n= 8) and the instrumental detection limits were 0.7-25 pg. At the two workplaces where MDI- and HDI isocyanurate-based products were sprayed, the isocyanate composition in the air reflected the composition in the technical product. At the workplace where a MDI-based product was used in a moulding process, only the monomeric isocyanates were found in the air. The advantage of using characterised technical grade isocyanates as analytical standards was clearly demonstrated and the possibility of using index compounds when monitoring isocyanate exposure is discussed.

Biochips: A fruitful product of solid state physics and molecular biology

NASA Astrophysics Data System (ADS)

Mendoza-Alvarez, Julio G.

1998-08-01

The application of the standard high resolution photolithography techniques used in the semiconductor device industry to the growth of a chain of nucleotides with a precise and well known sequence, has made possible the fabrication of a new kind of device, the so called biochips. At the National Polytechnic Institute in Mexico we have joined a multidisciplinary scientific group, and we are in the process of developing the technical capabilities in order to set up a processing lab to fabricate biochips focused to very specific applications in the area of cancer detection. We present here the main lines along which this project is being developed.

SCMLA: Technical Writing. Proceedings (Houston, Texas, October 1987).

ERIC Educational Resources Information Center

Oklahoma State Univ., Stillwater.

In order to make information about technical writing more available, the South Central Modern Language Association (SCMLA) has collected the papers not subject to copyright restrictions that were presented at the technical writing section of its 1987 meeting. The essays cover a wide range of topics in technical writing pedagogy and research. The…

25 CFR 30.111 - When should the tribal governing body or school board request technical assistance?

Code of Federal Regulations, 2011 CFR

2011-04-01

... request technical assistance? 30.111 Section 30.111 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION ADEQUATE YEARLY PROGRESS Defining Adequate Yearly Progress Technical Assistance § 30.111 When should the tribal governing body or school board request technical assistance? In order to...

National Assessment of Oil and Gas Project: geologic assessment of undiscovered gas hydrate resources on the North Slope, Alaska

USGS Publications Warehouse

USGS AK Gas Hydrate Assessment Team: Collett, Timothy S.; Agena, Warren F.; Lee, Myung Woong; Lewis, Kristen A.; Zyrianova, Margarita V.; Bird, Kenneth J.; Charpentier, Ronald R.; Cook, Troy A.; Houseknecht, David W.; Klett, Timothy R.; Pollastro, Richard M.

2014-01-01

Scientists with the U.S. Geological Survey have completed the first assessment of the undiscovered, technically recoverable gas hydrate resources beneath the North Slope of Alaska. This assessment indicates the existence of technically recoverable gas hydrate resources—that is, resources that can be discovered, developed, and produced using current technology. The approach used in this assessment followed standard geology-based USGS methodologies developed to assess conventional oil and gas resources. In order to use the USGS conventional assessment approach on gas hydrate resources, three-dimensional industry-acquired seismic data were analyzed. The analyses indicated that the gas hydrates on the North Slope occupy limited, discrete volumes of rock bounded by faults and downdip water contacts. This assessment approach also assumes that the resource can be produced by existing conventional technology, on the basis of limited field testing and numerical production models of gas hydrate-bearing reservoirs. The area assessed in northern Alaska extends from the National Petroleum Reserve in Alaska on the west through the Arctic National Wildlife Refuge on the east and from the Brooks Range northward to the State-Federal offshore boundary (located 3 miles north of the coastline). This area consists mostly of Federal, State, and Native lands covering 55,894 square miles. Using the standard geology-based assessment methodology, the USGS estimated that the total undiscovered technically recoverable natural-gas resources in gas hydrates in northern Alaska range between 25.2 and 157.8 trillion cubic feet, representing 95 percent and 5 percent probabilities of greater than these amounts, respectively, with a mean estimate of 85.4 trillion cubic feet.

Standardization and quality management in next-generation sequencing.

PubMed

Endrullat, Christoph; Glökler, Jörn; Franke, Philipp; Frohme, Marcus

2016-09-01

DNA sequencing continues to evolve quickly even after > 30 years. Many new platforms suddenly appeared and former established systems have vanished in almost the same manner. Since establishment of next-generation sequencing devices, this progress gains momentum due to the continually growing demand for higher throughput, lower costs and better quality of data. In consequence of this rapid development, standardized procedures and data formats as well as comprehensive quality management considerations are still scarce. Here, we listed and summarized current standardization efforts and quality management initiatives from companies, organizations and societies in form of published studies and ongoing projects. These comprise on the one hand quality documentation issues like technical notes, accreditation checklists and guidelines for validation of sequencing workflows. On the other hand, general standard proposals and quality metrics are developed and applied to the sequencing workflow steps with the main focus on upstream processes. Finally, certain standard developments for downstream pipeline data handling, processing and storage are discussed in brief. These standardization approaches represent a first basis for continuing work in order to prospectively implement next-generation sequencing in important areas such as clinical diagnostics, where reliable results and fast processing is crucial. Additionally, these efforts will exert a decisive influence on traceability and reproducibility of sequence data.

Federal Guidance for Radiation Protection

EPA Pesticide Factsheets

EPA produces federal guidance technical reports, which standardize dose and risk assessment and issues radiation protection guidance to federal agencies. This page provides links to federal guidance policy recommendations and technical reports.

Standardization: Hardware and Software Standardization Can Reduce Costs and Save Time

ERIC Educational Resources Information Center

Brooks-Young, Susan

2005-01-01

Sadly, technical support doesn't come cheap. One money-saving strategy that's gained popularity among school technicians is equipment and software standardization. When it works, standardization can be very effective. However, standardization has its drawbacks. This article discusses the advantages and disadvantages of standardization.

High-Penetration Photovoltaic Planning Methodologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, David Wenzhong; Muljadi, Eduard; Tian, Tian

The main objective of this report is to provide an overview of select U.S. utility methodologies for performing high-penetration photovoltaic (HPPV) system planning and impact studies. This report covers the Federal Energy Regulatory Commission's orders related to photovoltaic (PV) power system interconnection, particularly the interconnection processes for the Large Generation Interconnection Procedures and Small Generation Interconnection Procedures. In addition, it includes U.S. state interconnection standards and procedures. The procedures used by these regulatory bodies consider the impacts of HPPV power plants on the networks. Technical interconnection requirements for HPPV voltage regulation include aspects of power monitoring, grounding, synchronization, connection tomore » the overall distribution system, back-feeds, disconnecting means, abnormal operating conditions, and power quality. This report provides a summary of mitigation strategies to minimize the impact of HPPV. Recommendations and revisions to the standards may take place as the penetration level of renewables on the grid increases and new technologies develop in future years.« less

Solitaire salvage: a stent retriever-assisted catheter reduction technical report.

PubMed

Parry, Phillip Vaughan; Morales, Alejandro; Jankowitz, Brian Thomas

2016-07-01

The endovascular management of giant aneurysms often proves difficult with standard techniques. Obtaining distal access to allow catheter reduction is often key to approaching these aneurysms, but several anatomic challenges make this task unsafe and not feasible. Obtaining distal anchor points and performing catheter reduction maneuvers using adjunctive devices is not a novel concept, however using the Solitaire in order to do so may have some distinct advantages compared with previously described methods. Here we describe our novel Solitaire salvage technique, which allowed successful reduction of a looped catheter within an aneurysm in three cases. While this technique is expensive and therefore best performed after standard maneuvers have failed, in our experience it was effective, safe, and more efficient than other methods. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Standardization by ISO to Ensure the Sustainability of Space Activities

NASA Astrophysics Data System (ADS)

Kato, A.; Lazare, B.; Oltrogge, D.; Stokes, H.

2013-08-01

The ISO / Technical Committee 20 / Sub-committee 14 develops debris-related standards and technical reports to mitigate debris and help ensure mission and space sustainability. While UN Guidelines and the IADC Guidelines encourage national governments and agencies to promote debris mitigation design and operation, the ISO standards will help the global space industry promote and sustain its space-related business. In this paper the scope and status of each ISO standard is discussed within an overall framework. A comparison with international guidelines is also provided to demonstrate the level of consistency. Finally, as a case study, the ISO standards are applied to a CubeSat mission, thus demonstrating their usability on a relatively recent and popular class of satellite.

Definitions for a common standard for 2D speckle tracking echocardiography: consensus document of the EACVI/ASE/Industry Task Force to standardize deformation imaging.

PubMed

Voigt, Jens-Uwe; Pedrizzetti, Gianni; Lysyansky, Peter; Marwick, Tom H; Houle, Hélène; Baumann, Rolf; Pedri, Stefano; Ito, Yasuhiro; Abe, Yasuhiko; Metz, Stephen; Song, Joo Hyun; Hamilton, Jamie; Sengupta, Partho P; Kolias, Theodore J; d'Hooge, Jan; Aurigemma, Gerard P; Thomas, James D; Badano, Luigi Paolo

2015-02-01

Recognizing the critical need for standardization in strain imaging, in 2010, the European Association of Echocardiography (now the European Association of Cardiovascular Imaging, EACVI) and the American Society of Echocardiography (ASE) invited technical representatives from all interested vendors to participate in a concerted effort to reduce intervendor variability of strain measurement. As an initial product of the work of the EACVI/ASE/Industry initiative to standardize deformation imaging, we prepared this technical document which is intended to provide definitions, names, abbreviations, formulas, and procedures for calculation of physical quantities derived from speckle tracking echocardiography and thus create a common standard. Copyright © 2015 American Society of Echocardiography. All rights reserved.

42 CFR 493.1451 - Standard: Technical supervisor responsibilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... testing samples; and (vi) Assessment of problem solving skills; and (9) Evaluating and documenting the... analysis and reporting of test results; (5) Resolving technical problems and ensuring that remedial actions...

78 FR 9631 - Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Residential...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-11

... planning to conduct in-depth technical analyses in the following areas: (1) Engineering; (2) energy-use... refer to the statute as amended through the American Energy Manufacturing Technical Corrections Act... technical amendment, which was published in the Federal Register on July 28, 2008, that codified the EISA...

78 FR 47253 - Approval and Promulgation of Air Quality Implementation Plans; Maine; Oxides of Nitrogen...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-05

...-hour ozone standard in any area in the OTR. The State's submittals include detailed technical analyses... areas in the OTR. The State's technical analyses rely on several different techniques used to analyze... Maine's requests? Based on the ME DEP's technical analyses discussed above, EPA believes that the State...

Design Study for Project on Standard Operating Procedures for Technical Library Services.

ERIC Educational Resources Information Center

Libbey, Miles A.; And Others

The overall objective of the Technical Information Support Activities (TISA) Project is the production of a "Post Commander's Handbook." The handbook will be instrumental in achieving greater utilization of available technical information resources to assist army scientists and engineers engaged in the support of army combat and other…

45 CFR 162.920 - Availability of implementation specifications and operating rules.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Technical Report Type 3. The implementation specifications for the ASC X12N and the ASC X12 Standards for Electronic Data Interchange Technical Report Type 3 (and accompanying Errata or Type 1 Errata) may be... charged for all implementation specifications, including Technical Reports Type 3. Charging for such...

78 FR 65641 - Midcontinent Independent System Operator, Inc.; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... the allocation of real-time Revenue Sufficiency Guarantee (RSG) costs.\\1\\ In its order, the Commission... to discuss the issues raised by MISO's proposed revisions to its real-time RSG cost allocation... Independent System Operator, Inc.; Notice of Technical Conference By order dated October 16, 2013, in Docket...

75 FR 44789 - Northern Natural Gas Company; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-29

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RP10-841-000] Northern Natural Gas Company; Notice of Technical Conference July 20, 2010. By order dated July 9, 2010 \\1\\ the... discussed in the July 9, 2010 Order. \\1\\ Northern Natural Gas Company, 132 FERC ] 61,021 (2010). FERC...

75 FR 82382 - Electronic Tariff Filings; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-30

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. RM01-5-000] Electronic... electronic filing of tariff and tariff related materials pursuant to Order No. 714.\\1\\ The technical... implementation of eTariff. \\1\\ Electronic Tariff Filings, Order No. 714, 73 FR 57,515 (Oct. 3, 2008), 124 FERC...

75 FR 51036 - ANR Pipeline Company; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-18

... Company; Notice of Technical Conference August 11, 2010. By order dated July 30, 2010 \\1\\ the Federal... will be held on Wednesday, September 15, 2010 at the Commission's headquarters at 888 First Street, NE... July 30, 2010 order. \\1\\ ANR Pipeline Company, 132 FERC ] 61,090 (2010). FERC conferences are...

A Model for Joint Software Reviews

DTIC Science & Technology

1998-10-01

CEPMAN 1, 1996; Gabb, 1997], and with the growing popularity of outsourcing, they are becoming more important in the commercial sector [ ISO /IEC 12207 ...technical and management reviews [MIL-STD-498, 1996; ISO /IEC 12207 , 1995]. Management reviews occur after technical reviews, and are focused on the cost...characteristics, Standard (No. ISO /IEC 9126-1). [ ISO /IEC 12207 , 1995] Information Technology Software Life Cycle Processes, Standard (No. ISO /IEC 12207

Documentation of the runqual module for ADDAMS: Comparison of predicted runoff water quality with standards. Environmental effects of dredging. Technical notes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schroeder, P.R.; Gibson, A.C.; Dardeau, E.A.

This technical note has a twofold purpose: to describe a technique for comparing the predicted quality of surface runoff from confined dredged material disposal areas with applicable water quality standards and to document a computer program called RUNQUAL, written for that purpose as a part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Wei; Gowri, Krishnan; Lane, Michael D.

2009-09-28

This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

34 CFR 421.1 - What is the Business and Education Standards Program?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION BUSINESS AND EDUCATION STANDARDS... technical committees that will develop national standards for competencies in industries and trades...

Evaluation of Google Glass Technical Limitations on Their Integration in Medical Systems.

PubMed

Martinez-Millana, Antonio; Bayo-Monton, Jose-Luis; Lizondo, Aroa; Fernandez-Llatas, Carlos; Traver, Vicente

2016-12-15

Google Glass is a wearable sensor presented to facilitate access to information and assist while performing complex tasks. Despite the withdrawal of Google in supporting the product, today there are multiple applications and much research analyzing the potential impact of this technology in different fields of medicine. Google Glass satisfies the need of managing and having rapid access to real-time information in different health care scenarios. Among the most common applications are access to electronic medical records, display monitorizations, decision support and remote consultation in specialties ranging from ophthalmology to surgery and teaching. The device enables a user-friendly hands-free interaction with remote health information systems and broadcasting medical interventions and consultations from a first-person point of view. However, scientific evidence highlights important technical limitations in its use and integration, such as failure in connectivity, poor reception of images and automatic restart of the device. This article presents a technical study on the aforementioned limitations (specifically on the latency, reliability and performance) on two standard communication schemes in order to categorize and identify the sources of the problems. Results have allowed us to obtain a basis to define requirements for medical applications to prevent network, computational and processing failures associated with the use of Google Glass.

Evaluation of Google Glass Technical Limitations on Their Integration in Medical Systems

PubMed Central

Martinez-Millana, Antonio; Bayo-Monton, Jose-Luis; Lizondo, Aroa; Fernandez-Llatas, Carlos; Traver, Vicente

2016-01-01

Google Glass is a wearable sensor presented to facilitate access to information and assist while performing complex tasks. Despite the withdrawal of Google in supporting the product, today there are multiple applications and much research analyzing the potential impact of this technology in different fields of medicine. Google Glass satisfies the need of managing and having rapid access to real-time information in different health care scenarios. Among the most common applications are access to electronic medical records, display monitorizations, decision support and remote consultation in specialties ranging from ophthalmology to surgery and teaching. The device enables a user-friendly hands-free interaction with remote health information systems and broadcasting medical interventions and consultations from a first-person point of view. However, scientific evidence highlights important technical limitations in its use and integration, such as failure in connectivity, poor reception of images and automatic restart of the device. This article presents a technical study on the aforementioned limitations (specifically on the latency, reliability and performance) on two standard communication schemes in order to categorize and identify the sources of the problems. Results have allowed us to obtain a basis to define requirements for medical applications to prevent network, computational and processing failures associated with the use of Google Glass. PMID:27983691

Report number codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, R.N.

This publication lists all report number codes processed by the Office of Scientific and Technical Information. The report codes are substantially based on the American National Standards Institute, Standard Technical Report Number (STRN)-Format and Creation Z39.23-1983. The Standard Technical Report Number (STRN) provides one of the primary methods of identifying a specific technical report. The STRN consists of two parts: The report code and the sequential number. The report code identifies the issuing organization, a specific program, or a type of document. The sequential number, which is assigned in sequence by each report issuing entity, is not included in thismore » publication. Part I of this compilation is alphabetized by report codes followed by issuing installations. Part II lists the issuing organization followed by the assigned report code(s). In both Parts I and II, the names of issuing organizations appear for the most part in the form used at the time the reports were issued. However, for some of the more prolific installations which have had name changes, all entries have been merged under the current name.« less

Transfer of knowledge in international cooperation: the Farmanguinhos - SMM case.

PubMed

Silva, Samuel Araujo Gomes da; Duarte, Roberto Gonzalez; Castro, José Márcio de

2017-01-01

To analyze the influence of four mechanisms of knowledge transfer (training, technical visits, expatriation, and standard operating procedures) on the different dimensions (potential and realized) of absorptive capacity in international technical cooperation. We examine the case of implementation of the Sociedade Moçambicana de Medicamentos. Data have been collected using semi-structured interviews (applied to 21 professionals of the Sociedade Moçambicana de Medicamentos, Farmanguinhos, FIOCRUZ, and Itamaraty) and official documents. The data of the interviews have been submitted to content analysis, using the software NVivo. Training and technical visits directly influenced the acquisition and, partly, the assimilation of knowledge. Expatriation contributed with the transformation of this knowledge from the development and refinement of operational routines. Finally, the definition of standard operating procedures allowed the Mozambican technicians to be the actors of the transformation of the knowledge previously acquired and assimilated and, at the same time, it laid the foundations for a future exploration of the knowledge. Training and technical visits mainly influence the potential absorptive capacity, while expatriation and standard operating procedures most directly affect the realized absorptive capacity.

Compilation of nuclear standards, 9th edition, 1972. Part I. United States activities. Final issue

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Activities in nuclear standards preparation are presented in tables. Technical, industrial, and environmental organizations preparing standards are listed alphabetically and their activities are given. Approved standards, unapproved drafts, and tentative standards are listed. Standards are indexed by organization and permuted title. (FS)

An audit questionnaire that examines specifically the management of technical activities clauses in ISO 15189.

PubMed

Hartley, T F

2010-01-01

The aim of this study was to design an audit questionnaire that focuses on the management of the technical activities in a Diagnostic Pathology Laboratory. The ISO 15189 Standard is written in such a way that it continually moves back and forth from topics where the auditor needs to question bench level staff, to topics where the auditor needs to question Technical Management Staff. This makes for a disjointed audit process - both Bench Staff and Technical Managers are repeatedly interrupted. The solution was to do a clause by clause analysis of the Standard and assign the major responsibility for the compliance to each clause to either Technical Managers or Bench Staff. The Clauses were then grouped under four topic headings regardless of whether they were a Section 4 or Section 5 Clause. Two questionnaires have emerged - the one described in this work and one directed primarily towards the activities of bench staff. There are 95 questions and it takes approximately two hours to complete.

Prognostics and Health Management in Nuclear Power Plants: A Review of Technologies and Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coble, Jamie B.; Ramuhalli, Pradeep; Bond, Leonard J.

This report reviews the current state of the art of prognostics and health management (PHM) for nuclear power systems and related technology currently applied in field or under development in other technological application areas, as well as key research needs and technical gaps for increased use of PHM in nuclear power systems. The historical approach to monitoring and maintenance in nuclear power plants (NPPs), including the Maintenance Rule for active components and Aging Management Plans for passive components, are reviewed. An outline is given for the technical and economic challenges that make PHM attractive for both legacy plants through Lightmore » Water Reactor Sustainability (LWRS) and new plant designs. There is a general introduction to PHM systems for monitoring, fault detection and diagnostics, and prognostics in other, non-nuclear fields. The state of the art for health monitoring in nuclear power systems is reviewed. A discussion of related technologies that support the application of PHM systems in NPPs, including digital instrumentation and control systems, wired and wireless sensor technology, and PHM software architectures is provided. Appropriate codes and standards for PHM are discussed, along with a description of the ongoing work in developing additional necessary standards. Finally, an outline of key research needs and opportunities that must be addressed in order to support the application of PHM in legacy and new NPPs is presented.« less

The mandate for a proper preservation in histopathological tissues.

PubMed

Comănescu, Maria; Arsene, D; Ardeleanu, Carmen; Bussolati, G

2012-01-01

A sequence of technically reproducible procedures is mandatory to guarantee a proper preservation of tissues and to build up the basis for sound diagnoses. However, while the goal of these procedures was, until recently, to assure only structural (histological and cytological) preservation, an appropriate preservation of antigenic properties and of nucleic acid integrity is now additionally requested, in order to permit pathologists to provide the biological information necessary for the adoption of personalized therapies. The present review analyses the sequence of technical steps open to critical variations. Passages such as dehydration, paraffin embedding, sectioning and staining are relatively well standardized and allow adoption of dedicated (automatic) apparatuses, while other pre-analytical steps, i.e. time and modalities of transfer of surgical specimens from the surgical theatre to the pathology laboratory (s.c. "ischemia time") and the type and length of fixation are not standardized and are a potential cause of discrepancies in diagnostic results. Our group is involved in European-funded projects tackling these problems with the concrete objective of implementing a model of effective tumors investigations by high performance genetic and molecular methodologies. The problem of the discrepant quality level of histopathological and cytological preparations involved five European countries and exploiting the potential of "virtual slide technology". Concrete issues, techniques and pitfalls, as well as proposed guidelines for processing the tissues are shown in this presentation.

A Preliminary Report on the CO2 Laser for Lumbar Fusion: Safety, Efficacy and Technical Considerations.

PubMed

Villavicencio, Alan T; Burneikiene, Sigita; Babuska, Jason M; Nelson, Ewell L; Mason, Alexander; Rajpal, Sharad

2015-04-01

The purpose of this study was to evaluate potential technical advantages of the CO2 laser technology in mini-open transforaminal lumbar interbody fusion (TLIF) surgeries and report our preliminary clinical data on the safety and clinical outcomes. There is currently no literature discussing the recently redeveloped CO2 laser technology application for lumbar fusion. Safety and clinical outcomes were compared between two groups: 24 patients that underwent CO2 laser-assisted one-level TLIF surgeries and 30 patients that underwent standard one-level TLIF surgeries without the laser. There were no neural thermal injuries or other intraoperative laser-related complications encountered in this cohort of patients. At a mean follow-up of 17.4 months, significantly reduced lower back pain scores (P=0.013) were reported in the laser-assisted patient group compared to a standard fusion patient group. Lower extremity radicular pain intensity scores were similar in both groups. Laser-assisted TLIF surgeries showed a tendency (P = 0.07) of shorter operative times that was not statistically significant. Based on this preliminary clinical report, the safety of the CO2 laser device for lumbar fusion surgeries was assessed. There were no neural thermal injuries or other intraoperative laser-related complications encountered in this cohort of patients. Further investigation of CO2 laser-assisted lumbar fusion procedures is warranted in order to evaluate its effect on clinical outcomes.

Direct Final Rule for Technical Amendments for Marine Spark-Ignition Engines and Vessels

EPA Pesticide Factsheets

Rule published September 16, 2010 to make technical amendments to the design standard for portable marine fuel tanks. This rule incorporates safe recommended practices, developed through industry consensus.

A Correlation between the Assignment of Personnel to Technical Order Validation/Verification Versus Technical Order Deficiency Forms Generated.

DTIC Science & Technology

1980-06-01

Position organization Loction 111111 NO CUAaI Pft"lTV PC@ PUVATUt. L $3 -- STT I BUSINESS REPLY MAIL _____ AM? SAM POWf N &. n = WMNINSTS L. POSTAGS WVl K...11. CONTROLLING OFF ICE NMEM AND ADDRESS 2 Department of Communication8 and Humanities - US P RIAGENCYNAMEA ADORESS(it different from Coneo5U...Sec.II, p .0-5-19]. And specifically to the point of this thesis: Without the additional manpower spaces, program acquisition support for Technical

75 FR 33682 - Export Administration Regulations; Technical Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-15

...-01] RIN 0694-AE93 Export Administration Regulations; Technical Amendments AGENCY: Bureau of Industry... Bureau of Industry and Security (BIS) makes a technical amendment to the Export Administration... review of final decisions and orders issued in BIS export control administrative enforcement proceedings...

Socio-Technical Considerations for the Use of Blockchain Technology in Healthcare.

PubMed

Wong, Ming Chao; Yee, Kwang Chien; Nøhr, Christian

2018-01-01

Blockchain technology is often considered as the fourth industrial revolution that will change the world. The enthusiasm of the transformative nature of blockchain technology has infiltrated healthcare. Blockchain is often seen as the much needed and perfect technology for healthcare, addressing the difficult and complex issues of security and inter-operability. More importantly, the "value" and trust-based system can deliver automated action and response via its smart contract mechanism. Healthcare, however, is a complex system. Health information technology (HIT) so far, has not delivered its promise of transforming healthcare due to its complex socio-technical and context sensitive interaction. The introduction of blockchain technology will need to consider a whole range of socio-technical issues in order to improve the quality and safety of patient care. This paper presents a discussion on these socio-technical issues. More importantly, this paper argues that in order to achieve the best outcome from blockchain technology, there is a need to consider a clinical transformation from "information" to "value " and trust. This paper argues that urgent research is needed to address these socio-technical issues in order to facilitate best outcomes for blockchain in healthcare. These socio-technical issues must then be further evaluated by means of working prototypes in the medical domain in coming years.

Comparative analyses of different variants of standard ground for automatic control systems of technical processes of oil and gas production

NASA Astrophysics Data System (ADS)

Gromakov, E. I.; Gazizov, A. T.; Lukin, V. P.; Chimrov, A. V.

2017-01-01

The paper analyses efficiency (interference resistance) of standard TT, TN, IT networks in control links of automatic control systems (ACS) of technical processes (TP) of oil and gas production. Electromagnetic compatibility (EMC) is a standard term used to describe the interference in grounding circuits. Improved EMC of ACS TP can significantly reduce risks and costs of malfunction of equipment that could have serious consequences. It has been proved that an IT network is the best type of grounds for protection of ACS TP in real life conditions. It allows reducing the interference down to the level that is stated in standards of oil and gas companies.

47 CFR 95.857 - Emission standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... SERVICES 218-219 MHz Service Technical Standards § 95.857 Emission standards. (a) All transmissions by each... frequency as close to the edge of the authorized frequency segment as the transmitter is designed to be...

47 CFR 95.857 - Emission standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... SERVICES 218-219 MHz Service Technical Standards § 95.857 Emission standards. (a) All transmissions by each... frequency as close to the edge of the authorized frequency segment as the transmitter is designed to be...

47 CFR 95.857 - Emission standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... SERVICES 218-219 MHz Service Technical Standards § 95.857 Emission standards. (a) All transmissions by each... frequency as close to the edge of the authorized frequency segment as the transmitter is designed to be...

48 CFR 11.201 - Identification and availability of specifications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Identification and... nongovernment standards, including voluntary consensus standards, from the National Technical Information... obtain from the DoDSSP those nongovernment standards, including voluntary consensus standards, adopted...

75 FR 79354 - Assessment Technology Standards Request for Information (RFI)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-20

... DEPARTMENT OF EDUCATION Assessment Technology Standards Request for Information (RFI) AGENCY... information to gather technical expertise pertaining to assessment technology standards. SUMMARY: The purpose of this RFI is to collect information relating to assessment technology standards. Toward that end...

Update Of The ACR-NEMA Standard Committee

NASA Astrophysics Data System (ADS)

Wang, Yen; Best, D. E.; Morse, R. R.; Horii, S. C.; Lehr, J. L.; Lodwick, G. S.; Fuscoe, C.; Nelson, O. L.; Perry, J. R.; Thompson, B. G.; Wessell, W. R.

1988-06-01

In January, 1984, the American College of Radiology (ACR) representing the users of imaging equipment and the National Electrical Manufacturers Association (NEMA) representing the manufacturers of imaging equipment joined forces to create a committee that could solve the compatibility issues surrounding the exchange of digital medical images. This committee, the ACR-NEMA Digital Imaging and Communication Standards Committee was composed of radiologists and experts from industry who addressed the problems involved in interfacing different digital imaging modalities. In just two years, the committee and three of its working groups created an industry standard interface, ACR-NEMA Digital Imaging and Communications Standard, Publication No. 300-1985. The ACR-NEMA interface allows digital medical images and related information to be communicated between different imaging devices, regardless of manufacturer or use of differing image formats. The interface is modeled on the International Standards Organization's Open Systems Interconnection sever-layer reference model. It is believed that the development of the Interface was the first step in the development of standards for Medical Picture Archiving and Communications Systems (PACS). Developing the interface Standard has required intensive technical analysis and examination of the future trends for digital imaging in order to design a model which would not be quickly outmoded. To continue the enhancement and future development of image management systems, various working groups have been created under the direction of the ACR-NEMA Committee.

Involvement of Technical Reasoning More Than Functional Knowledge in Development of Tool Use in Childhood

PubMed Central

Remigereau, Chrystelle; Roy, Arnaud; Costini, Orianne; Osiurak, François; Jarry, Christophe; Le Gall, Didier

2016-01-01

It is well-known that even toddlers are able to manipulate tools in an appropriate manner according to their physical properties. The ability of children to make novel tools in order to solve problems is, however, surprisingly limited. In adults, mechanical problem solving (MPS) has been proposed to be supported by “technical reasoning skills,” which are thought to be involved in every situation requiring the use of a tool (whether conventional or unusual). The aim of this study was to investigate the typical development of real tool use (RTU) skills and its link with technical reasoning abilities in healthy children. Three experimental tasks were adapted from those used with adults: MPS (three different apparatus), RTU (10 familiar tool-object pairs), and functional knowledge (FK; 10 functional picture matching with familiar tools previously used). The tasks were administered to 85 healthy children divided into six age groups (from 6 to 14 years of age). The results revealed that RTU (p = 0.01) and MPS skills improve with age, even if this improvement differs according to the apparatus for the latter (p < 0.01 for the Hook task and p < 0.05 for the Sloping task). Results also showed that MPS is a better predictor of RTU than FK, with a significant and greater weight (importance weight: 0.65; Estimate ± Standard Error: 0.27 ± 0.08). Ours findings suggest that RTU and technical reasoning develop jointly in children, independently from development of FK. In addition, technical reasoning appears partially operative from the age of six onward, even though the outcome of these skills depends of the context in which they are applied (i.e., the type of apparatus). PMID:27877141

The role of LATU as national metrology institute of Uruguay and its responsibilities

NASA Astrophysics Data System (ADS)

Robatto, O.; Quagliata, E.; Santo, C.; Sica, A.; Sponton, M.

2013-09-01

Laboratorio Tecnológico del Uruguay (LATU) is the National Metrology Institute of Uruguay and has the obligation to maintain the national standards stated by National Law 15298. At present LATU is acting as a secondary laboratory as well as a primary laboratory. LATU was ISO 17025:2005 DKD (Deutscher Kalibrierdienst) accredited from 2001 up to 2007. By that time LATU decided to support its Capabilities of Measurement and Calibration (CMCs) at CIPM-MRA (Mutual Recognition Arrangement between national metrology institutes (NMIs)) by peer assessment. A Peer Review has been done in 2008 in order to get the QSTF (Sistema Interamericano de Metrología, Quality System Task Force) approval. "New "CMCs for Industrial Thermometers have been approved by the JCRB on September 2010. CMCs claimed for Standard Resistance Platinum Thermometers (SPRTs) calibration at fixed points have not been approved yet because there were some requirements of traceability of employed cells that were not fulfilled but will be solved properly. The declared CMCs have been chosen by LATU in order to cover the increasing calibration services required by the industry and the secondary calibration laboratories. To demonstrate its technical competence an support its declared "CMCs" LATU has also participated at bilateral and regional comparisons. In recent years LATU, the National Accreditation Body (OUA), the Standards Institute, the National Institute of Quality and Compliance Bodies have become Members of a new Institution to strengthen the Quality Infrastructure of the country (SUNAMEC). As part of this new activities, LATU is giving training courses to the secondary laboratories performing calibrations in temperature that want to get accredited by the National Accreditation Body and to act as Technical Evaluators or Auditors when required by OUA. It is expected, that in the future and in the frame of new accredited and recognized temperature calibration laboratories, LATU could strengthen its activities in maintaining its own national standards, developing new calibration services and performing comparisons as pilot laboratory for Uruguay and also regionally. The role of secondary laboratory could be diminished and therefore the activities as a reference laboratory in investigation would be benefited. This paper describes all the activities carried out at LATU in Temperature in the last years to reach the goals stated and the coming ones that have to be done to help developing main objectives as a country in this field.

Minnesota Technical College System: Library/Media Services Survey and Report.

ERIC Educational Resources Information Center

Olson, Lynette

This document presents a report on the Minnesota Technical College System's Library and Media Services. All 34 technical colleges were given a survey to prepare, a Library Advisory Board was established, and relevant literature and standards were reviewed to conduct and obtain data for this study. The report begins with the mission, values, and…

Credit Quandaries: How Career and Technical Education Teachers Can Teach Courses That Include Academic Credit. Ask the Team

ERIC Educational Resources Information Center

Jacques, Catherine

2014-01-01

Many career and technical education (CTE) courses not only provide students with vocational and technical skills and knowledge, but engage them in academic content as well. Designed thoughtfully, these courses can address rigorous academic content standards and be as intellectually demanding as traditional academic courses (Southern Regional…

76 FR 11417 - Public Workshop and Hearing for Rear Visibility; Federal Motor Vehicle Safety Standard, Rearview...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

...), Department of Transportation (DOT). ACTION: Notice of proposed rulemaking: Announcement of a public technical... this proposal. The first event, a public technical workshop, will be held on March 11, 2011, to discuss technical issues relevant to the test procedure described in the proposed rule. The second event, a public...

Technical Manual for the Conceptual Learning and Development Assessment Series II: Cutting Tool. Technical Report No. 435. Reprinted December 1977.

ERIC Educational Resources Information Center

DiLuzio, Geneva J.; And Others

This document accompanies Conceptual Learning and Development Assessment Series II: Cutting Tool, a test constructed to chart the conceptual development of individuals. As a technical manual, it contains information on the rationale, development, standardization, and reliability of the test, as well as essential information and statistical data…

Technical Manual for the Conceptual Learning and Development Assessment Series IV: Tree. Technical Report No. 437. Reprinted December 1977.

ERIC Educational Resources Information Center

DiLuzio, Geneva J.; And Others

This document accompanies the Conceptual Learning and Development Assessment Series III: Tree, a test constructed to chart the conceptual development of individuals. As a technical manual, it contains information on the rationale, development, standardization, and reliability of the test, as well as essential information and statistical data for…

Technical Manual for the Conceptual Learning and Development Assessment Series II: Equilateral Triangle. Technical Report No. 434. Reprinted December 1977.

ERIC Educational Resources Information Center

DiLuzio, Geneva J.; And Others

This document accompanies the Conceptual Learning and Development Assessment Series I: Equilateral Triangle, a test constructed to chart the conceptual developemnt of individuals. As a technical manual, it contains information on the rationale, development, standardization, and reliability of the test, as well as essential information and…

Technical Manual for the Conceptual Learning and Development Assessment Series III: Noun. Technical Report No. 436. Reprinted December 1977.

ERIC Educational Resources Information Center

DiLuzio, Geneva J.; And Others

This document accompanies the Conceptual Learning and Development Assessment Series IV: Noun, a test constructed to chart the conceptual development of individuals. As a technical manual, it contains information on the rationale, development, standardization, and reliability of the test, as well as essential information and statistical data for…

Open Field Test; Technical Report 14. Disadvantaged Children and Their First School Experiences. ETS-Head Start Longitudinal Study. Technical Report Series.

ERIC Educational Resources Information Center

Ward, William C.

The Open Field Test was used to assess variables that might not be manifested in a more standard testing situation. In this test, the child was shown 10 standard play objects in the room, and was told to do anything he wished with the toys. The tester initiated no interaction with the child and responded minimally to any overture made by the…

AgRISTARS: Foreign Commodity production forecasting. Project procedures designation and description document, volume 1

NASA Technical Reports Server (NTRS)

Waggoner, J. T.; Phinney, D. E. (Principal Investigator)

1981-01-01

The crop estimation analysis procedures documentation of the AgRISTARS - Foreign Commodity Production Forecasting Project (FCPF) is presented. Specifically it includes the technical/management documentation of the remote sensing data analysis procedures prepared in accordance with the guidelines provided in the FCPF communication/documentation standards manual. Standard documentation sets are given arranged by procedural type and level then by crop types or other technically differentiating categories.

A SOA-Based Platform to Support Clinical Data Sharing.

PubMed

Gazzarata, R; Giannini, B; Giacomini, M

2017-01-01

The eSource Data Interchange Group, part of the Clinical Data Interchange Standards Consortium, proposed five scenarios to guide stakeholders in the development of solutions for the capture of eSource data. The fifth scenario was subdivided into four tiers to adapt the functionality of electronic health records to support clinical research. In order to develop a system belonging to the "Interoperable" Tier, the authors decided to adopt the service-oriented architecture paradigm to support technical interoperability, Health Level Seven Version 3 messages combined with LOINC (Logical Observation Identifiers Names and Codes) vocabulary to ensure semantic interoperability, and Healthcare Services Specification Project standards to provide process interoperability. The developed architecture enhances the integration between patient-care practice and medical research, allowing clinical data sharing between two hospital information systems and four clinical data management systems/clinical registries. The core is formed by a set of standardized cloud services connected through standardized interfaces, involving client applications. The system was approved by a medical staff, since it reduces the workload for the management of clinical trials. Although this architecture can realize the "Interoperable" Tier, the current solution actually covers the "Connected" Tier, due to local hospital policy restrictions.

A SOA-Based Platform to Support Clinical Data Sharing

PubMed

Gazzarata, R; Giannini, B; Giacomini, M

2017-01-01

The eSource Data Interchange Group, part of the Clinical Data Interchange Standards Consortium, proposed five scenarios to guide stakeholders in the development of solutions for the capture of eSource data. The fifth scenario was subdivided into four tiers to adapt the functionality of electronic health records to support clinical research. In order to develop a system belonging to the “Interoperable” Tier, the authors decided to adopt the service-oriented architecture paradigm to support technical interoperability, Health Level Seven Version 3 messages combined with LOINC (Logical Observation Identifiers Names and Codes) vocabulary to ensure semantic interoperability, and Healthcare Services Specification Project standards to provide process interoperability. The developed architecture enhances the integration between patient-care practice and medical research, allowing clinical data sharing between two hospital information systems and four clinical data management systems/clinical registries. The core is formed by a set of standardized cloud services connected through standardized interfaces, involving client applications. The system was approved by a medical staff, since it reduces the workload for the management of clinical trials. Although this architecture can realize the “Interoperable” Tier, the current solution actually covers the “Connected” Tier, due to local hospital policy restrictions. © 2017 R. Gazzarata et al.

A SOA-Based Platform to Support Clinical Data Sharing

PubMed Central

Gazzarata, R.; Giannini, B.

2017-01-01

The eSource Data Interchange Group, part of the Clinical Data Interchange Standards Consortium, proposed five scenarios to guide stakeholders in the development of solutions for the capture of eSource data. The fifth scenario was subdivided into four tiers to adapt the functionality of electronic health records to support clinical research. In order to develop a system belonging to the “Interoperable” Tier, the authors decided to adopt the service-oriented architecture paradigm to support technical interoperability, Health Level Seven Version 3 messages combined with LOINC (Logical Observation Identifiers Names and Codes) vocabulary to ensure semantic interoperability, and Healthcare Services Specification Project standards to provide process interoperability. The developed architecture enhances the integration between patient-care practice and medical research, allowing clinical data sharing between two hospital information systems and four clinical data management systems/clinical registries. The core is formed by a set of standardized cloud services connected through standardized interfaces, involving client applications. The system was approved by a medical staff, since it reduces the workload for the management of clinical trials. Although this architecture can realize the “Interoperable” Tier, the current solution actually covers the “Connected” Tier, due to local hospital policy restrictions. PMID:29065576

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.; Baggs, Rhoda

2007-01-01

Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

Bibliography--Unclassified Technical Reports, Special Reports, and Technical Notes: FY 1982.

DTIC Science & Technology

1982-11-01

in each category are listed in chronological order under seven areas: manpower management, personnel administration , organization management, education...7633). Technical reports listed that have unlimited distribution can also be obtained from the National Technical Information Service , 5285 Port Royal...simulations of manpower systems. This research exploits the technology of computer-managed large-scale data bases. PERSONNEL ADMINISTRATION The personnel

A standardized non-instrumental tool for characterizing workstations concerned with exposure to engineered nanomaterials

NASA Astrophysics Data System (ADS)

Canu I, Guseva; C, Ducros; S, Ducamp; L, Delabre; S, Audignon-Durand; C, Durand; Y, Iwatsubo; D, Jezewski-Serra; Bihan O, Le; S, Malard; A, Radauceanu; M, Reynier; M, Ricaud; O, Witschger

2015-05-01

The French national epidemiological surveillance program EpiNano aims at surveying mid- and long-term health effects possibly related with occupational exposure to either carbon nanotubes or titanium dioxide nanoparticles (TiO2). EpiNano is limited to workers potentially exposed to these nanomaterials including their aggregates and agglomerates. In order to identify those workers during the in-field industrial hygiene visits, a standardized non-instrumental method is necessary especially for epidemiologists and occupational physicians unfamiliar with nanoparticle and nanomaterial exposure metrology. A working group, Quintet ExpoNano, including national experts in nanomaterial metrology and occupational hygiene reviewed available methods, resources and their practice in order to develop a standardized tool for conducting company industrial hygiene visits and collecting necessary information. This tool, entitled “Onsite technical logbook”, includes 3 parts: company, workplace, and workstation allowing a detailed description of each task, process and exposure surrounding conditions. This logbook is intended to be completed during the company industrial hygiene visit. Each visit is conducted jointly by an industrial hygienist and an epidemiologist of the program and lasts one or two days depending on the company size. When all collected information is computerized using friendly-using software, it is possible to classify workstations with respect to their potential direct and/or indirect exposure. Workers appointed to workstations classified as concerned with exposure are considered as eligible for EpiNano program and invited to participate. Since January 2014, the Onsite technical logbook has been used in ten company visits. The companies visited were mostly involved in research and development. A total of 53 workstations with potential exposure to nanomaterials were pre-selected and observed: 5 with TiO2, 16 with single-walled carbon nanotubes, 27 multiwalled carbon nanotubes. Among the tasks observed there were: nanomaterial characterisation analysis (8), weighing (7), synthesis (6), functionalization (5), and transfer (5). The manipulated quantities were usually very small. After analysis of the data gathered in logbooks, 30 workstations have been classified as concerned with exposure to carbon nanotubes or TiO2. Additional tool validity as well as inter-and intra-evaluator reproducibility studies are ongoing. The first results are promising.

75 FR 61121 - Trade Adjustment Assistance for Farmers

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-04

... program, may apply for technical training and cash benefits by completing and submitting a written... technical assistance training under the program in order to be eligible for cash benefits. Producers.... After submitting a completed application, producers may receive technical assistance at no cost and cash...

Technical Mathematics: Restructure of Technical Mathematics.

ERIC Educational Resources Information Center

Flannery, Carol A.

Designed to accompany a series of videotapes, this textbook provides information, examples, problems, and solutions relating to mathematics and its applications in technical fields. Chapter I deals with basic arithmetic, providing information on fractions, decimals, ratios, proportions, percentages, and order of operations. Chapter II focuses on…

Status of WSTF Pyrovalve Handbook Development in Year 2000

NASA Technical Reports Server (NTRS)

Howard, Julien L.; Hart, Matthew; Smith, William; Saulsberry Regor L.; Fries, Joseph (Technical Monitor)

1999-01-01

Significant data have been generated through various spacecraft propulsion system projects involving the use of pyrotechnically operated valves (pyrovalves). These data need to be analyzed, interpreted, summarized, associated, and formatted so they can be made available for spacecraft propulsion system design involving pyrovalves and used to specify test procedures in the performance evaluation and qualification of these systems. To meet this need, a Pyrovalve Handbook is being developed at the NASA White Sands Test Facility. Standards of performance for pyrovalve applications are being formulated under the sponsorship of the NASA Technical Standards Program, as are pyrovalve testing standards under the sponsorship of the NASA Safety and Risk Management Program. The ultimate goal is to have the Handbook adopted as a voluntary standard under the guidance of the AIAA Energetic Components and Systems Technical Committee and, in a more restrictive format, become an integral part of ISO standards for Explosive Systems and Devices Used on Space Vehicles. Feedback from both Government and industry is encouraged and will be the focus of the presentation. It is especially critical that feedback be received on content and formatting of the Handbook to maximize benefit to the technical community. Submission of validated data from organizations outside of NASA is also encouraged.

77 FR 43196 - Minimum Internal Control Standards and Technical Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-24

... NATIONAL INDIAN GAMING COMMISSION 25 CFR Parts 543 and 547 Minimum Internal Control Standards [email protected] . SUPPLEMENTARY INFORMATION: Part 543 addresses minimum internal control standards (MICS) for Class II gaming operations. The regulations require tribes to establish controls and implement...

Suborbital Safety Technical Committee- Summary of Proposed Standards & Guidelines

NASA Astrophysics Data System (ADS)

Quinn, Andy; Atencia Yepez, Amaya; Klicker, Michael; Howard, Diane; Verstraeten, Joram; Other Suborbital Safety TC Members

2013-09-01

There are currently no international safety standards and guidelines to assist designers, operators and authorities in the suborbital domain. There is a launch licensing regime in the United States (US) to assist the forerunners of the suborbital domain however this does not provide a safety approval for the vehicle against set standards or does not have an acceptable level of safety to achieve in terms of design or operation. In Europe a certification framework may be implemented however this (or any regulatory framework) is not in place as yet. This paper summarises the 5 tasks thus far completed by the International Association for the Advancement of Space Safety (IAASS) Suborbital Safety Technical Committee (SS TC) in terms of deriving standards and guidelines for the suborbital domain. The SS TC comprises members from the suborbital industry (US and European vehicle designers), safety experts, legal experts, medical/training experts, prospective spaceport operators and members from the US and European authorities (though these members cannot directly steer the standards and guidelines - they can merely review them for interest and comment on non-policy aspects). The SS TC has been divided into three working groups (WG): Regulatory WG, Technical WG and Operations WG. The 5 tasks that are summarised in this paper include: Regulatory WG - (Task 1) Clarify and promote regulatory framework for suborbital flights (including discussions on Space Law 'v' Air Law for suborbital domain); Technical WG - (Task 1) Defining & Alignment (globally) of Safety Criteria for Suborbital domain using industry best practices, (Task 2) Software/complex hardware certification for suborbital flights; Operations WG - (Task 1) Flight Crew and Spaceflight Participant Medical and Training Standards & Guidelines for suborbital flight, (Task 2) Spaceport Safety Management System. This paper also details the next set of standards and guidelines that will be derived by the SS TC. The paper concludes that these and future IAASS suborbital safety standards and guidelines are needed now and should beconsidered by the industry players before the first commercial flights expected late 2013/early 2014.

ZBIT Bioinformatics Toolbox: A Web-Platform for Systems Biology and Expression Data Analysis

PubMed Central

Römer, Michael; Eichner, Johannes; Dräger, Andreas; Wrzodek, Clemens; Wrzodek, Finja; Zell, Andreas

2016-01-01

Bioinformatics analysis has become an integral part of research in biology. However, installation and use of scientific software can be difficult and often requires technical expert knowledge. Reasons are dependencies on certain operating systems or required third-party libraries, missing graphical user interfaces and documentation, or nonstandard input and output formats. In order to make bioinformatics software easily accessible to researchers, we here present a web-based platform. The Center for Bioinformatics Tuebingen (ZBIT) Bioinformatics Toolbox provides web-based access to a collection of bioinformatics tools developed for systems biology, protein sequence annotation, and expression data analysis. Currently, the collection encompasses software for conversion and processing of community standards SBML and BioPAX, transcription factor analysis, and analysis of microarray data from transcriptomics and proteomics studies. All tools are hosted on a customized Galaxy instance and run on a dedicated computation cluster. Users only need a web browser and an active internet connection in order to benefit from this service. The web platform is designed to facilitate the usage of the bioinformatics tools for researchers without advanced technical background. Users can combine tools for complex analyses or use predefined, customizable workflows. All results are stored persistently and reproducible. For each tool, we provide documentation, tutorials, and example data to maximize usability. The ZBIT Bioinformatics Toolbox is freely available at https://webservices.cs.uni-tuebingen.de/. PMID:26882475

Rough spacecraft surfaces -a threat to Planetary Protection issues

NASA Astrophysics Data System (ADS)

Probst, Alexander; Facius, Rainer; Wirth, Reinhard; Moissl-Eichinger, Christine

Inadvertent introduction of terrestrial microorganisms to foreign solar bodies could compromise the integrity of present and future life detection missions. For Planetary Protection purposes space agencies measure the aerobic, mesophilic spore load of a spacecraft as a proxy indicator in order to determine its bioload. Emerging novel hardware in space science implicates novel surface structures and materials that need to be controlled with regard to contaminations. For instance (roughened) carbon fiber reinforced plastic and Vectran fabric for construction of landing platforms and airbags, respectively, have been used in some Mars exploration missions. These materials have different levels of roughness and their potential risk to retain spores for insufficient sampling success has never been in scope of investigation. In this comprehensive study we evaluated ESA's novel nylon flocked swab protocol on stainless steel and other tech-nical surfaces with regard to Bacillus spore recovery. Low recovery efficiencies of the ESA standard wipe assay for large surface sampling were demonstrated with regard to Bacillus at-rophaeus spore detection. Therefore another protocol designed for rough surface sampling was evaluated on Vectran fabric and (roughened) carbon fiber reinforced plastic. Moreover, scan-ning electron micrographs of the technical surfaces studied allowed a more detailed view on their properties. The evaluated sampling protocols and the corresponding results are of high interest for future life detection missions in order to preserve their scientific integrity throughout spacecraft assembly.

Counter rotating fans — An aircraft propulsion for the future?

NASA Astrophysics Data System (ADS)

Schimming, Peter

2003-05-01

In the mid seventies a new propulsor for aircraft was designed and investigated - the so-called PROPFAN. With regard to the total pressure increase, it ranges between a conventional propeller and a turbofan with very high bypass ratio. This new propulsion system promised a reduction in fuel consumption of 15 to 25% compared to engines at that time. A lot of propfans (Hamilton Standard, USA) with different numbers of blades and blade shapes have been designed and tested in wind tunnels in order to find an optimum in efficiency, Fig.1. Parallel to this development GE, USA, made a design of a counter rotating unducted propfan, the so-called UDF, Fig.2. A prototype engine was manufactured and investigated on an in-flight test bed mounted at the MD82 and the B727. Since that time there has not been any further development of propfans (except AN 70 with NK 90-engine, Ukraine, which is more or less a propeller design) due to relatively low fuel prices and technical obstacles. Only technical programs in different countries are still going on in order to prepare a data base for designing counter rotating fans in terms of aeroacoustics, aerodynamics and aeroelasticities. In DLR, Germany, a lot of experimental and numerical work has been undertaken to understand the physical behaviour of the unsteady flow in a counter rotating fan.

The International Planetary Data Alliance (IPDA): Activities in 2010-2012

NASA Astrophysics Data System (ADS)

Crichton, Daniel; Beebe, Reta; Kasaba, Yasumasa; Sarkissian, Alain; Capria, Maria Teresa; Hughes, Steven; Osuna, Pedro

2012-07-01

The IPDA is an international collaboration of space agencies with a mission of providing access to scientific data returned from solar system missions archived at international data centers. In order to improve access and share scientific data, the IPDA was founded to develop data and software standards. The IPDA has focused on promoting standards that drive common methods for collecting and describing planetary science data. An initial starting point for developing such a standard has been the internationalization of NASA's Planetary Data System (PDS) standard, which has become a de-facto standard. The IPDA has also focused on developing software standards that promote interoperability through the use of common software protocols allowing agencies to link their systems together. The IPDA has made significant progress since its inaugural meeting in 2006 adopting standards and developing collaborations across agencies to ensure data is captured in common formats. It has also grown to approximately eight agencies represented by a number of different groups through the IPDA Steering Committee [1]. The IPDA Steering Committee oversees the execution of projects. Over the past two years, the IPDA Steering Committee has conducted a number of focused projects around the development of these standards to enable interoperability, construction of compatible archives, and the operation of the IPDA as a whole. These projects have helped to establish the IPDA and to bring together the collaboration. Two key projects have been: development of a common protocol for data exchange, the Planetary Data Access Protocol (PDAP); and collaboration with the NASA Planetary Data System (PDS) on the next generation PDS standards, PDS4.. Both of these are progressing well and have draft standards that are now being tested. More recently, the IPDA has formed a Technical Experts Group (TEG) that is responsible for the technical architecture and implementation of the projects. As agencies implement archive systems, it is essential that the standards and software support exists and provide guidance to ensure that agencies can develop IPDA compatible archives. This talk will cover the results of the IPDA projects over the 2010-2012 timeframe. It will also discuss the plans for the next two years including the focus on ensuring that the IPDA standards for both the system and data are accessible for use by the international planetary science community. Finally, it will discuss progress on linking planetary archive systems together so scientists can access archived data regardless of the location. [1] http://planetarydata.org/members

Site-Specific Reference Person Parameters and Derived Concentration Standards for the Savannah River Site

DOE PAGES

Stone, Daniel K.; Higley, Kathryn A.; Jannik, G. Timothy

2014-05-01

The U.S. Department of Energy Order 458.1 states that the compliance with the 1 mSv annual dose constraint to a member of the public may be demonstrated by calculating dose to the maximally exposed individual (MEI) or to a representative person. Historically, the MEI concept was used for dose compliance at the Savannah River Site (SRS) using adult dose coefficients and adult male usage parameters. For future compliance, SRS plans to use the representative person concept for dose estimates to members of the public. The representative person dose will be based on the reference person dose coefficients from the U.S.more » DOE Derived Concentration Technical Standard and on usage parameters specific to SRS for the reference and typical person. Usage parameters and dose coefficients were determined for inhalation, ingestion and external exposure pathways. The parameters for the representative person were used to calculate and tabulate SRS-specific derived concentration standards (DCSs) for the pathways not included in DOE-STD-1196-2011.« less

Optimization of a protocol for myocardial perfusion scintigraphy by using an anthropomorphic phantom.

PubMed

Ramos, Susie Medeiros Oliveira; Glavam, Adriana Pereira; Kubo, Tadeu Takao Almodovar; de Sá, Lidia Vasconcellos

2014-01-01

To develop a study aiming at optimizing myocardial perfusion imaging. Imaging of an anthropomorphic thorax phantom with a GE SPECT Ventri gamma camera, with varied activities and acquisition times, in order to evaluate the influence of these parameters on the quality of the reconstructed medical images. The (99m)Tc-sestamibi radiotracer was utilized, and then the images were clinically evaluated on the basis of data such as summed stress score, and on the technical image quality and perfusion. The software ImageJ was utilized in the data quantification. The results demonstrated that for the standard acquisition time utilized in the procedure (15 seconds per angle), the injected activity could be reduced by 33.34%. Additionally, even if the standard scan time is reduced by 53.34% (7 seconds per angle), the standard injected activity could still be reduced by 16.67%, without impairing the image quality and the diagnostic reliability. The described method and respective results provide a basis for the development of a clinical trial of patients in an optimized protocol.

Optimization of a protocol for myocardial perfusion scintigraphy by using an anthropomorphic phantom*

PubMed Central

Ramos, Susie Medeiros Oliveira; Glavam, Adriana Pereira; Kubo, Tadeu Takao Almodovar; de Sá, Lidia Vasconcellos

2014-01-01

Objective To develop a study aiming at optimizing myocardial perfusion imaging. Materials and Methods Imaging of an anthropomorphic thorax phantom with a GE SPECT Ventri gamma camera, with varied activities and acquisition times, in order to evaluate the influence of these parameters on the quality of the reconstructed medical images. The 99mTc-sestamibi radiotracer was utilized, and then the images were clinically evaluated on the basis of data such as summed stress score, and on the technical image quality and perfusion. The software ImageJ was utilized in the data quantification. Results The results demonstrated that for the standard acquisition time utilized in the procedure (15 seconds per angle), the injected activity could be reduced by 33.34%. Additionally, even if the standard scan time is reduced by 53.34% (7 seconds per angle), the standard injected activity could still be reduced by 16.67%, without impairing the image quality and the diagnostic reliability. Conclusion The described method and respective results provide a basis for the development of a clinical trial of patients in an optimized protocol. PMID:25741088

75 FR 41432 - Trade Adjustment Assistance for Farmers

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-16

... interested in applying for technical training and cash benefits must complete and submit a written..., 2010. After submitting a completed application, producers may receive technical assistance at no cost.... Applicants must complete the technical assistance under the program in order to be eligible for cash benefits...

RECOMMENDED FOUNDATION FILL MATERIALS CONSTRUCTION STANDARD OF THE FLORIDA RADON RESEARCH PROGRAM

EPA Science Inventory

The report summarizes the technical basis for a recommended foundation fill materials standard for new construction houses in Florida. he radon-control construction standard was developed by the Florida Radon Research Program (FRRP). ill material standards are formulated for: (1)...

Twenty new ISO standards on dosimetry for radiation processing

NASA Astrophysics Data System (ADS)

Farrar, H., IV

2000-03-01

Twenty standards on essentially all aspects of dosimetry for radiation processing were published as new ISO standards in December 1998. The standards are based on 20 standard practices and guides developed over the past 14 years by Subcommittee E10.01 of the American Society for Testing and Materials (ASTM). The transformation to ISO standards using the 'fast track' process under ISO Technical Committee 85 (ISO/TC85) commenced in 1995 and resulted in some overlap of technical information between three of the new standards and the existing ISO Standard 11137 Sterilization of health care products — Requirements for validation and routine control — Radiation sterilization. Although the technical information in these four standards was consistent, compromise wording in the scopes of the three new ISO standards to establish precedence for use were adopted. Two of the new ISO standards are specifically for food irradiation applications, but the majority apply to all forms of gamma, X-ray, and electron beam radiation processing, including dosimetry for sterilization of health care products and the radiation processing of fruit, vegetables, meats, spices, processed foods, plastics, inks, medical wastes, and paper. Most of the standards provide exact procedures for using individual dosimetry systems or for characterizing various types of irradiation facilities, but one covers the selection and calibration of dosimetry systems, and another covers the treatment of uncertainties using the new ISO Type A and Type B evaluations. Unfortunately, nine of the 20 standards just adopted by the ISO are not the most recent versions of these standards and are therefore already out of date. To help solve this problem, efforts are being made to develop procedures to coordinate the ASTM and ISO development and revision processes for these and future ASTM-originating dosimetry standards. In the meantime, an additional four dosimetry standards have recently been published by the ASTM but have not yet been submitted to the ISO, and six more dosimetry standards are under development.

Partial Withdrawal and Final Rule for Nonroad Technical Amendments

EPA Pesticide Factsheets

Amendments to the technical hardship provisions under the Transition Program for Equipment Manufacturers related to the Tier 4 standards for nonroad diesel engines, and to the replacement engine exemption generally applicable to new nonroad engines.

A WET TALE: TOXICITY OF COMPLEX EFFLUENTS

EPA Science Inventory

This course covers standards, regulations, policy, guidance and technical aspects of implementing the whole effluent toxicity program. The curriculum incorporates rationale and information on WET test requirements from USEPA documents, such as the Technical Support Document for W...

NASA Scientific and Technical Information Standards

NASA Technical Reports Server (NTRS)

2006-01-01

This document presents general recommended standards for documenting scientific and technical information (STI) from a number of scientific and engineering disciplines. It is a companion publication to NASA SP-7084, "Grammar, Punctuation, and Capitalization: A Handbook for Technical Writers and Editors," and is intended primarily for STI personnel and publishing personnel within NASA and who support NASA STI publishing. Section 1 gives an overview of NASA STI publications. Section 2 discusses figure preparation considerations. Section 3 covers table design, and Section 4 gives information about symbols and math related to STI publishing. Section 5 covers units of measure. Section 6 discusses References, and Section 7 discusses electronic documents. Section 8 covers information related to the review of STI prior to publication; this covers both technical and dissemination review and approval, including data quality. Section 9 discusses printing and dissemination related to STI, and Section 10 gives abbreviations and acronyms used in the document.

Relationships Among Student Ability, School Performance, and Fleet Supervisor Ratings for Navy ’A’ School Graduates.

DTIC Science & Technology

1982-11-01

April 1980. 9 NEMA ._ Technical Report 136 Subsequent reports in the series will present: " an analysis of relationships among training effectiveness...individualized courses were above the standardized norm (i.e., 50). Graduates 20 Technical Report 136 of the TO and MM600 courses had the highest...Ability Characteristics. The average AFQT percentile scores for all the conventional courses were above the standardized norm (50). Graduates of the FTM

Author-Editor Guide to Technical Publications Preparation. Revision

DTIC Science & Technology

1990-01-01

meteorology, climatology, military technical publications. ( ") <- 15: Number of Pages: 68 17. Security Classification of Report: Unclassified 1... Security Classification of this Page: Unclassified 19. Security Classification of Abstract: Unclassified 20. Limitation of Abstract: UL Standard Form 298...34 There are, however, February 1983. numerous exceptions. Although some technical material may not be classified in accordance with security AFR 83-2, Air

ESDIS Standards Office (ESO): Requirements, Standards and Practices

NASA Technical Reports Server (NTRS)

Mitchell, Andrew E.; Mcinerney, Mark Allen; Enloe, Yonsok K.; Conover, Helen T.; Doyle, Allan

2016-01-01

The ESDIS Standards Office assists the ESDIS Project in formulating standards policy for NASA Earth Science Data Systems (ESDS), coordinates standards activities within ESDIS, and provides technical expertise and assistance with standards related tasks within the NASA Earth Science Data System Working Groups (ESDSWG). This poster summarizes information found on the earthdata.nasa.gov site that describes the ESO.

25 CFR 13.16 - Technical assistance after disapproval.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Technical assistance after disapproval. 13.16 Section 13.16 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAW AND ORDER TRIBAL REASSUMPTION OF JURISDICTION OVER CHILD CUSTODY PROCEEDINGS Reassumption § 13.16 Technical assistance after disapproval. If a...

Commercial Discount Rate Estimation for Efficiency Standards Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fujita, K. Sydny

2016-04-13

Underlying each of the Department of Energy's (DOE's) federal appliance and equipment standards are a set of complex analyses of the projected costs and benefits of regulation. Any new or amended standard must be designed to achieve significant additional energy conservation, provided that it is technologically feasible and economically justified (42 U.S.C. 6295(o)(2)(A)). A proposed standard is considered economically justified when its benefits exceed its burdens, as represented by the projected net present value of costs and benefits. DOE performs multiple analyses to evaluate the balance of costs and benefits of commercial appliance and equipment e efficiency standards, at themore » national and individual building or business level, each framed to capture different nuances of the complex impact of standards on the commercial end user population. The Life-Cycle Cost (LCC) analysis models the combined impact of appliance first cost and operating cost changes on a representative commercial building sample in order to identify the fraction of customers achieving LCC savings or incurring net cost at the considered efficiency levels.1 Thus, the choice of commercial discount rate value(s) used to calculate the present value of energy cost savings within the Life-Cycle Cost model implicitly plays a key role in estimating the economic impact of potential standard levels.2 This report is intended to provide a more in-depth discussion of the commercial discount rate estimation process than can be readily included in standard rulemaking Technical Support Documents (TSDs).« less

Hanford business structure for HANDI 2000 business management system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, D.

The Hanford Business Structure integrates the project`s technical, schedule, and cost baselines; implements the use of a standard code of accounts; and streamlines performance reporting and cost collection. Technical requirements drive the technical functions and come from the RDD 100 database. The functions will be identified in the P3 scheduling system and also in the PeopleSoft system. Projects will break their work down from the technical requirements in the P3 schedules. When the level at which they want to track cost via the code of accounts is reached, a Project ID will be generated in the PeopleSoft system. P3 maymore » carry more detailed schedules below the Project ID level. The standard code of accounts will identify discrete work activities done across the site and various projects. They will include direct and overhead type work scopes. Activities in P3 will roll up to this standard code of accounts. The field that will be used to record this in PeopleSoft is ``Activity``. In Passport it is a user-defined field. It will have to be added to other feeder systems. Project ID and code of accounts are required fields on all cost records.« less

Transfer of knowledge in international cooperation: the Farmanguinhos – SMM case

PubMed Central

da Silva, Samuel Araujo Gomes; Duarte, Roberto Gonzalez; de Castro, José Márcio

2017-01-01

ABSTRACT OBJECTIVE To analyze the influence of four mechanisms of knowledge transfer (training, technical visits, expatriation, and standard operating procedures) on the different dimensions (potential and realized) of absorptive capacity in international technical cooperation. METHODS We examine the case of implementation of the Sociedade Moçambicana de Medicamentos. Data have been collected using semi-structured interviews (applied to 21 professionals of the Sociedade Moçambicana de Medicamentos, Farmanguinhos, FIOCRUZ, and Itamaraty) and official documents. The data of the interviews have been submitted to content analysis, using the software NVivo. RESULTS Training and technical visits directly influenced the acquisition and, partly, the assimilation of knowledge. Expatriation contributed with the transformation of this knowledge from the development and refinement of operational routines. Finally, the definition of standard operating procedures allowed the Mozambican technicians to be the actors of the transformation of the knowledge previously acquired and assimilated and, at the same time, it laid the foundations for a future exploration of the knowledge. CONCLUSIONS Training and technical visits mainly influence the potential absorptive capacity, while expatriation and standard operating procedures most directly affect the realized absorptive capacity. PMID:29166441

Identification of the Key Fields and Their Key Technical Points of Oncology by Patent Analysis

PubMed Central

Zhang, Ting; Chen, Juan; Jia, Xiaofeng

2015-01-01

Background This paper aims to identify the key fields and their key technical points of oncology by patent analysis. Methodology/Principal Findings Patents of oncology applied from 2006 to 2012 were searched in the Thomson Innovation database. The key fields and their key technical points were determined by analyzing the Derwent Classification (DC) and the International Patent Classification (IPC), respectively. Patent applications in the top ten DC occupied 80% of all the patent applications of oncology, which were the ten fields of oncology to be analyzed. The number of patent applications in these ten fields of oncology was standardized based on patent applications of oncology from 2006 to 2012. For each field, standardization was conducted separately for each of the seven years (2006–2012) and the mean of the seven standardized values was calculated to reflect the relative amount of patent applications in that field; meanwhile, regression analysis using time (year) and the standardized values of patent applications in seven years (2006–2012) was conducted so as to evaluate the trend of patent applications in each field. Two-dimensional quadrant analysis, together with the professional knowledge of oncology, was taken into consideration in determining the key fields of oncology. The fields located in the quadrant with high relative amount or increasing trend of patent applications are identified as key ones. By using the same method, the key technical points in each key field were identified. Altogether 116,820 patents of oncology applied from 2006 to 2012 were retrieved, and four key fields with twenty-nine key technical points were identified, including “natural products and polymers” with nine key technical points, “fermentation industry” with twelve ones, “electrical medical equipment” with four ones, and “diagnosis, surgery” with four ones. Conclusions/Significance The results of this study could provide guidance on the development direction of oncology, and also help researchers broaden innovative ideas and discover new technological opportunities. PMID:26599967

Identification of the Key Fields and Their Key Technical Points of Oncology by Patent Analysis.

PubMed

Zhang, Ting; Chen, Juan; Jia, Xiaofeng

2015-01-01

This paper aims to identify the key fields and their key technical points of oncology by patent analysis. Patents of oncology applied from 2006 to 2012 were searched in the Thomson Innovation database. The key fields and their key technical points were determined by analyzing the Derwent Classification (DC) and the International Patent Classification (IPC), respectively. Patent applications in the top ten DC occupied 80% of all the patent applications of oncology, which were the ten fields of oncology to be analyzed. The number of patent applications in these ten fields of oncology was standardized based on patent applications of oncology from 2006 to 2012. For each field, standardization was conducted separately for each of the seven years (2006-2012) and the mean of the seven standardized values was calculated to reflect the relative amount of patent applications in that field; meanwhile, regression analysis using time (year) and the standardized values of patent applications in seven years (2006-2012) was conducted so as to evaluate the trend of patent applications in each field. Two-dimensional quadrant analysis, together with the professional knowledge of oncology, was taken into consideration in determining the key fields of oncology. The fields located in the quadrant with high relative amount or increasing trend of patent applications are identified as key ones. By using the same method, the key technical points in each key field were identified. Altogether 116,820 patents of oncology applied from 2006 to 2012 were retrieved, and four key fields with twenty-nine key technical points were identified, including "natural products and polymers" with nine key technical points, "fermentation industry" with twelve ones, "electrical medical equipment" with four ones, and "diagnosis, surgery" with four ones. The results of this study could provide guidance on the development direction of oncology, and also help researchers broaden innovative ideas and discover new technological opportunities.

Standardization Documents

DTIC Science & Technology

2011-08-01

Specifications and Standards; Guide Specifications; CIDs; and NGSs . Learn. Perform. Succeed. STANDARDIZATION DOCUMENTS Federal Specifications Commercial...national or international standardization document developed by a private sector association, organization, or technical society that plans ...Maintain lessons learned • Examples: Guidance for application of a technology; Lists of options Learn. Perform. Succeed. DEFENSE HANDBOOK

Manual of Accreditation Standards for Adventure Programs 1995.

ERIC Educational Resources Information Center

Williamson, John E., Comp.; Gass, Michael, Comp.

This manual presents standards for adventure education programs seeking accreditation from the Association for Experiential Education. The manual is set up sequentially, focusing both on objective standards such as technical risk management aspects, and on subjective standards such as teaching approaches used in programs. Chapter titles provide…

18 CFR 415.42 - Technical standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Determining Flood Flow Frequency—Bulletin No. 17—Water Resources Council, March 1976. State and local agencies...) Standards used by state and local governments shall conform in principle to Commission standards but may... from the application of Commission standards. The Commission will review proposed state and local flood...

Definitions for a common standard for 2D speckle tracking echocardiography: consensus document of the EACVI/ASE/Industry Task Force to standardize deformation imaging.

PubMed

Voigt, Jens-Uwe; Pedrizzetti, Gianni; Lysyansky, Peter; Marwick, Tom H; Houle, Helen; Baumann, Rolf; Pedri, Stefano; Ito, Yasuhiro; Abe, Yasuhiko; Metz, Stephen; Song, Joo Hyun; Hamilton, Jamie; Sengupta, Partho P; Kolias, Theodore J; d'Hooge, Jan; Aurigemma, Gerard P; Thomas, James D; Badano, Luigi Paolo

2015-01-01

Recognizing the critical need for standardization in strain imaging, in 2010, the European Association of Echocardiography (now the European Association of Cardiovascular Imaging, EACVI) and the American Society of Echocardiography (ASE) invited technical representatives from all interested vendors to participate in a concerted effort to reduce intervendor variability of strain measurement. As an initial product of the work of the EACVI/ASE/Industry initiative to standardize deformation imaging, we prepared this technical document which is intended to provide definitions, names, abbreviations, formulas, and procedures for calculation of physical quantities derived from speckle tracking echocardiography and thus create a common standard. Published on behalf of the European Society of Cardiology. All rights reserved. © The Author 2014. For permissions please email: journals.permissions@oup.com.

Air Quality Modeling Technical Support Document for the Final Cross State Air Pollution Rule Update

EPA Pesticide Factsheets

In this technical support document (TSD) we describe the air quality modeling performed to support the final Cross State Air Pollution Rule for the 2008 ozone National Ambient Air Quality Standards (NAAQS).

Gigabit Ethernet: A Technical Assessment.

ERIC Educational Resources Information Center

Axner, David

1997-01-01

Describes gigabit ethernet for LAN (local area network) technology that will expand ethernet bandwidth. Technical details are discussed, including protocol stacks, optical fiber, deployment strategy for performance improvement, ATM (Asynchronous Transfer Mode), real-time protocol, reserve reservation protocol, and standards. (LRW)

Traceability of Software Safety Requirements in Legacy Safety Critical Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.

2007-01-01

How can traceability of software safety requirements be created for legacy safety critical systems? Requirements in safety standards are imposed most times during contract negotiations. On the other hand, there are instances where safety standards are levied on legacy safety critical systems, some of which may be considered for reuse for new applications. Safety standards often specify that software development documentation include process-oriented and technical safety requirements, and also require that system and software safety analyses are performed supporting technical safety requirements implementation. So what can be done if the requisite documents for establishing and maintaining safety requirements traceability are not available?

Assessing and Reporting Dancer Capacities, Risk Factors, and Injuries: Recommendations from the IADMS Standard Measures Consensus Initiative.

PubMed

Liederbach, Marijeanne; Hagins, Marshall; Gamboa, Jennifer M; Welsh, Thomas M

2012-12-01

This technical report of the Standard Measures Consensus Initiative of the International Association for Dance Medicine and Science (IADMS) describes the results of the committee’s multi-year effort to synthesize information regarding the tests and measures used in dance-related research, protocols for reporting injuries, and appropriate use of available technologies to aid in standardizing such matters. Specific recommendations are presented, with accompanying rationales, to facilitate consensus among members of the dance medicine and science community. An Executive Summary of this Technical Report, which contains implementation strategies and appendices, should soon be available on the IADMS website.

Mark 4A project training evaluation

NASA Technical Reports Server (NTRS)

Stephenson, S. N.

1985-01-01

A participant evaluation of a Deep Space Network (DSN) is described. The Mark IVA project is an implementation to upgrade the tracking and data acquisition systems of the dSN. Approximately six hundred DSN operations and engineering maintenance personnel were surveyed. The survey obtained a convenience sample including trained people within the population in order to learn what training had taken place and to what effect. The survey questionnaire used modifications of standard rating scales to evaluate over one hundred items in four training dimensions. The scope of the evaluation included Mark IVA vendor training, a systems familiarization training seminar, engineering training classes, a on-the-job training. Measures of central tendency were made from participant rating responses. Chi square tests of statistical significance were performed on the data. The evaluation results indicated that the effects of different Mark INA training methods could be measured according to certain ratings of technical training effectiveness, and that the Mark IVA technical training has exhibited positive effects on the abilities of DSN personnel to operate and maintain new Mark IVA equipment systems.

Addressing Barriers to the Development and Adoption of Rapid Diagnostic Tests in Global Health.

PubMed

Miller, Eric; Sikes, Hadley D

Immunochromatographic rapid diagnostic tests (RDTs) have demonstrated significant potential for use as point-of-care diagnostic tests in resource-limited settings. Most notably, RDTs for malaria have reached an unparalleled level of technological maturity and market penetration, and are now considered an important complement to standard microscopic methods of malaria diagnosis. However, the technical development of RDTs for other infectious diseases, and their uptake within the global health community as a core diagnostic modality, has been hindered by a number of extant challenges. These range from technical and biological issues, such as the need for better affinity agents and biomarkers of disease, to social, infrastructural, regulatory and economic barriers, which have all served to slow their adoption and diminish their impact. In order for the immunochromatographic RDT format to be successfully adapted to other disease targets, to see widespread distribution, and to improve clinical outcomes for patients on a global scale, these challenges must be identified and addressed, and the global health community must be engaged in championing the broader use of RDTs.