Chemistry, manufacturing and control (CMC) and clinical trial technical support for influenza vaccine manufacturers.

PubMed

Wahid, Rahnuma; Holt, Renee; Hjorth, Richard; Berlanda Scorza, Francesco

2016-10-26

With the support of the Biomedical Advanced Research and Development Authority (BARDA) of the US Department of Health and Human Services, PATH has contributed to the World Health Organization's (WHO's) Global Action Plan for Influenza Vaccines (GAP) by providing technical and clinical assistance to several developing country vaccine manufacturers (DCVMs). GAP builds regionally based independent and sustainable influenza vaccine production capacity to mitigate the overall global shortage of influenza vaccines. The program also ensures adequate influenza vaccine manufacturing capacity in the event of an influenza pandemic. Since 2009, PATH has worked closely with two DCVMs in Vietnam: the Institute of Vaccines and Medical Biologicals (IVAC) and VABIOTECH. Beginning in 2013, PATH also began working with Torlak Institute in Serbia; Instituto Butantan in Brazil; Serum Institute of India Private Ltd. in India; and Changchun BCHT Biotechnology Co. (BCHT) in China. The DCVMs supported under the GAP program all had existing influenza vaccine manufacturing capability and required technical support from PATH to improve vaccine yield, process efficiency, and product formulation. PATH has provided customized technical support for the manufacturing process to each DCVM based on their respective requirements. Additionally, PATH, working with BARDA and WHO, supported several DCVMs in the clinical development of influenza vaccine candidates progressing toward national licensure or WHO prequalification. As a result of the activities outlined in this review, several companies were able to make excellent progress in developing state-of-the-art manufacturing processes and completing early phase clinical trials. Licensure trials are currently ongoing or planned for several DCVMs. Copyright © 2016 Elsevier Ltd. All rights reserved.

A systems approach to implementation of eLearning in medical education: five MEPI schools' journeys.

PubMed

Vovides, Yianna; Chale, Selamawit Bedada; Gadhula, Rumbidzayi; Kebaetse, Masego B; Nigussie, Netsanet Animut; Suleman, Fatima; Tibyampansha, Dativa; Ibrahim, Glory Ramadhan; Ntabaye, Moshi; Frehywot, Seble; Nkomazana, Oathokwa

2014-08-01

How should eLearning be implemented in resource-constrained settings? The introduction of eLearning at four African medical schools and one school of pharmacy, all part of the Medical Education Partnership Initiative (MEPI) eLearning Technical Working Group, highlighted the need for five factors essential for successful and sustainable implementation: institutional support; faculty engagement; student engagement; technical expertise; and infrastructure and support systems. All five MEPI schools reported strengthening technical expertise, infrastructure, and support systems; four schools indicated that they were also successful in developing student engagement; and three reported making good progress in building institutional support. Faculty engagement was the one core component that all five schools needed to enhance.

20 CFR 411.180 - What is timely progress toward self-supporting employment?

Code of Federal Regulations, 2010 CFR

2010-04-01

... certificate or vocational or technical training that will enhance your ability to return to work. In addition...-secondary education requirement or vocational or technical training requirement in the applicable progress... this 12-month period; or (iv) You must have been enrolled in a vocational or technical training program...

Work management plan for data systems and analysis directorate

NASA Technical Reports Server (NTRS)

Nichols, L. R.

1979-01-01

A contract with the Data Systems and Analysis Directorate contains a specified level of resources related to a specific set of work in support of three divisions within the Data Systems and Analysis Directorate. The divisions are Institutional Data Systems Division, Ground Data Systems Division, and Mission Planning and Analysis Division. The Statement of work defines at a functional requirements level the type of support to be provided to the three divisions. The contract provides for further technical direction to the contractor through issuance of Job Orders. The Job order is the prime method of further defining the work to be done, allocating a portion of the total resources in the contract to the defined tasks, and further delegating technical responsibility.

The power of a collaborative relationship between technical assistance providers and community prevention teams: A correlational and longitudinal study.

PubMed

Chilenski, Sarah M; Perkins, Daniel F; Olson, Jonathan; Hoffman, Lesa; Feinberg, Mark E; Greenberg, Mark; Welsh, Janet; Crowley, D Max; Spoth, Richard

2016-02-01

Historically, effectiveness of community collaborative prevention efforts has been mixed. Consequently, research has been undertaken to better understand the factors that support their effectiveness; theory and some related empirical research suggests that the provision of technical assistance is one important supporting factor. The current study examines one aspect of technical assistance that may be important in supporting coalition effectiveness, the collaborative relationship between the technical assistance provider and site lead implementer. Four and one-half years of data were collected from technical assistance providers and prevention team members from the 14 community prevention teams involved in the PROSPER project. Spearman correlation analyses with longitudinal data show that the levels of the collaborative relationship during one phase of collaborative team functioning associated with characteristics of internal team functioning in future phases. Results suggest that community collaborative prevention work should consider the collaborative nature of the technical assistance provider - prevention community team relationship when designing and conducting technical assistance activities, and it may be important to continually assess these dynamics to support high quality implementation. Copyright © 2015 Elsevier Ltd. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, D.W.; Heinrich, R.R.; Jensen, K.J.

Technical and administrative activities of the Analytical Chemistry Laboratory (ACL) are reported for fiscal year 1984. The ACL is a full-cost-recovery service center, with the primary mission of providing a broad range of technical support services to the scientific and engineering programs at ANL. In addition, ACL conducts a research program in analytical chemistry, works on instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL is administratively within the Chemical Technology Division, the principal user, but provides technical support for all of the technical divisions and programs at ANL. The ACL has threemore » technical groups - Chemical Analysis, Instrumental Analysis, and Organic Analysis. Under technical activities 26 projects are briefly described. Under professional activities, a list is presented for publications and reports, oral presentations, awards and meetings attended. 6 figs., 2 tabs.« less

Reducing the vulnerability of young Cambodians to HIV / STDs by mobilising and strengthening local NGO sector. RAS/88/P15.

PubMed

1999-06-01

This project seeks to help reduce the vulnerability of young Cambodians aged 12-25 to HIV/AIDS and sexually transmitted diseases (STDs) by strengthening nongovernmental organization (NGO) capacity to develop sustainable, effective and appropriate responses to HIV/AIDS and STDs. The strategies include strengthening local NGO capacity, sharing technical support concerning HIV/AIDS, and working together to develop information, education and communication on HIV/AIDS. Main activities included in the project are: 1) enable NGOs to undertake broader response to HIV/STDs by mobilizing, selecting, contracting, monitoring and supervising local NGO projects; 2) enhance local NGO capacity to work with the youth by organizing specialist training workshops, providing technical support and training in external relations and sustainability, and promoting local NGO/youth volunteer exchange and exposure programs; 3) strengthen the capacity of local NGOs through training, skill building, technical support and development of NGO support program; and 4) improve the knowledge base of programming for youth by identifying, documenting and disseminating effective programming models and tools.

Underground Test Area Activity Preemptive Review Guidance Nevada National Security Site, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farnham, Irene; Rehfeldt, Kenneth

Preemptive reviews (PERs) of Underground Test Area (UGTA) Activity corrective action unit (CAU) studies are an important and long-maintained quality improvement process. The CAU-specific PER committees provide internal technical review of ongoing work throughout the CAU lifecycle. The reviews, identified in the UGTA Quality Assurance Plan (QAP) (Sections 1.3.5.1 and 3.2), assure work is comprehensive, accurate, in keeping with the state of the art, and consistent with CAU goals. PER committees review various products, including data, documents, software/codes, analyses, and models. PER committees may also review technical briefings including Federal Facility Agreement and Consent Order (FFACO)-required presentations to the Nevadamore » Division of Environmental Protection (NDEP) and presentations supporting key technical decisions (e.g., investigation plans and approaches). PER committees provide technical recommendations to support regulatory decisions that are the responsibility of the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) and NDEP.« less

Opto-mechanical support services. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This subcontract was for Optomec`c support of the Los Alamos National Laboratory`s (LANL`s) Group MEE-12 in the technical specialty area of opto-mechanical design, engineering and fabrication. Two individual tasks were defined by MEE-12 and completed by Optomec personnel. Edward J. Yavornik acted as Principal Investigator on the Wire and Fluorescent Fiber Offset Grid (WAFFOG) for the Neutral Particle Beam (NPB) GTA (Ground Test Accelerator) Experiment, and Thomas Swann acted as Principal Investigator on the ESS-7 Photometers Project. Some hardware was procured/fabricated for the ESS-7 Photometer task, however, most of the work consisted of design and engineering support resulting in drawingsmore » and specifications which were prepared by MEE-12 personnel. There were no technical papers or patents generated by Optomec personnel as a result of this work, and all work defined in the contract was completed.« less

Lactation accommodation in the workplace and duration of exclusive breastfeeding.

PubMed

Bai, Yeon; Wunderlich, Shahla M

2013-01-01

The purpose of this study was to assess current lactation accommodations in a workplace environment and to examine the association between the different dimensions of support and the duration of exclusive breastfeeding. A survey was conducted with employees of a higher-education institution and clients of an obstetric hospital in New Jersey. Factor analysis identified dimensions of workplace support. The dimensions were correlated with the duration of exclusive breastfeeding using Pearson's r correlation analysis. One hundred and thirteen working mothers participated in the study. The mean (SD) number of working hours of the participants was 34.3 (2.8) hours per week. Participants were primarily white (89.4%), older (mean age, 33.8 [6.0] years), highly educated (>82% above college graduate), and married (92%). Participants indicated that in their workplaces, breastfeeding was not common, breast pumps were not available, and on-site day care was not always an option. The analysis identified 4 dimensions of breastfeeding accommodation: break time, workplace environment, technical support, and workplace policy. Technical support (r = 0.71, P = .01) and workplace environment (r = 0.26, P = .01) were significantly associated with the duration of exclusive breastfeeding. Employers can strengthen technical support and workplace environment to encourage breastfeeding continuation in working mothers. New federal laws should consider specific guidelines for minimum requirements for functional lactation support to achieve comprehensive breastfeeding benefits. © 2013 by the American College of Nurse-Midwives.

[Job satisfaction in an Italian university: difference between academic and technical-administrative staff].

PubMed

Ghislieri, Chiara; Colombo, Lara; Molino, Monica; Zito, Margherita; Curzi, Ylenia; Fabbri, Tommaso

2014-01-01

The changes in the academic world led to an increase in job demands and a decrease in the available job resources. In recent years, the positive image of work in academia has gradually blurred. The present study, within the theoretical framework of the job demands-resources model, aimed to analyse the relationship between some job demands (workload, work-family conflict and emotional dissonance) and some job resources (autonomy, supervisors' support and co-workers' support) and job satisfaction in a medium-sized Italian University, by observing the differences between the academic staff (professors and researchers) and the technical-administrative staff The research was conducted by administering a self-report questionnaire which allowed to detect job satisfaction and the mentioned variables. Respondents were 477 (177 from academic staff and 300 from technical-administrative staff). The analysis of variance (independent samples t-test) showed significant differences in variables of interest between academic staff and technical-administrative staff. Multiple regression pointed out that job autonomy is the main determinant of job satisfaction in the academic staff sample, whereas supervisor support is the main determinant of job satisfaction in the technical-administrative staff sample. This research represents one of the first Italian studies on these topics in the academic context and highlights the importance of further in-depth examinations of specific job dynamics for both teaching and technical-administrative staff. Among practical implications, the importance of keeping high levels of job autonomy for academic staff and of fostering an effective leadership development for technical-administrative staff emerged.

48 CFR 245.7002 - Duties and responsibilities of plant clearance officers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... clearance cases and disposal documents; (e) Initiate screening and provide technical support to screeners in...) Technical and quantitative allocability of property; (g) Ensure the timely shipment or release by the... are minimized and, when necessary, work with the contractor and property administrator to implement...

Fact Sheet: A Technical Guide to Ground-Water Model Selection at Sites Contaminated with Radioactive Substances

EPA Pesticide Factsheets

This fact sheet summarizes the findings of a report drafted by a joint Interagency Environmental Pathway Modeling Working Group. It is to be used by technical staff responsible for implementing flow and transport models to support cleanup decisions.

Vertical Lift - Not Just For Terrestrial Flight

NASA Technical Reports Server (NTRS)

Young, Larry A

2000-01-01

Autonomous vertical lift vehicles hold considerable potential for supporting planetary science and exploration missions. This paper discusses several technical aspects of vertical lift planetary aerial vehicles in general, and specifically addresses technical challenges and work to date examining notional vertical lift vehicles for Mars, Titan, and Venus exploration.

Women at work in NASA

NASA Technical Reports Server (NTRS)

Jenkins, H. G.

1980-01-01

Photographs and brief descriptions summarize the diversity of the female work force at NASA. Jobs are classified as: (1) technical support positions; (2) clerical and nonprofessional administrative; (3) professional administrative; and (4) professional scientific and engineering.

Site systems engineering fiscal year 1999 multi-year work plan (MYWP) update for WBS 1.8.2.2

DOE Office of Scientific and Technical Information (OSTI.GOV)

GRYGIEL, M.L.

1998-10-08

Manage the Site Systems Engineering process to provide a traceable integrated requirements-driven, and technically defensible baseline. Through the Site Integration Group(SIG), Systems Engineering ensures integration of technical activities across all site projects. Systems Engineering's primary interfaces are with the RL Project Managers, the Project Direction Office and with the Project Major Subcontractors, as well as with the Site Planning organization. Systems Implementation: (1) Develops, maintains, and controls the site integrated technical baseline, ensures the Systems Engineering interfaces between projects are documented, and maintain the Site Environmental Management Specification. (2) Develops and uses dynamic simulation models for verification of the baselinemore » and analysis of alternatives. (3) Performs and documents fictional and requirements analyses. (4) Works with projects, technology management, and the SIG to identify and resolve technical issues. (5) Supports technical baseline information for the planning and budgeting of the Accelerated Cleanup Plan, Multi-Year Work Plans, Project Baseline Summaries as well as performance measure reporting. (6) Works with projects to ensure the quality of data in the technical baseline. (7) Develops, maintains and implements the site configuration management system.« less

77 FR 42482 - Materials Technical Advisory Committee; Notice of Partially Closed Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-19

... Bureau of Industry and Security senior management. 3. Discussion on the role of the Implementation Support Unit of the Biological Weapons Convention. 4. Report on Composite Working Group and other working...

Making Work Pay: How To Design and Implement Financial Work Supports To Improve Family and Child Well-Being and Reduce Poverty. How-To Guide: Technical Assistance for States and Localities.

ERIC Educational Resources Information Center

Greenberger, Debbie; Anselmi, Robert

This guide explains how to design and implement financial work supports in order to improve family and child well-being. The information provided draws heavily from the study of these three programs that increased employment and earnings while improving employment stability, boosting income, and reducing poverty: Minnesota Family Investment…

Statements of work handbook. [technical writing for NASA programs

NASA Technical Reports Server (NTRS)

1975-01-01

Guidelines are presented for preparing statements of work (SOW) to assure a consistent approach throughout NASA. Statements of work for study and preliminary definition contracts, for definition and development of major systems, for support services, and for small research and development contracts are discussed.

Devising a consensus definition and framework for non-technical skills in healthcare to support educational design: A modified Delphi study.

PubMed

Gordon, Morris; Baker, Paul; Catchpole, Ken; Darbyshire, Daniel; Schocken, Dawn

2015-01-01

Non-technical skills are a subset of human factors that focus on the individual and promote safety through teamwork and awareness. There is no widely adopted competency- or outcome-based framework for non-technical skills training in healthcare. The authors set out to devise such a framework using a modified Delphi approach. An exhaustive list of published and team suggested items was presented to the expert panel for ranking and to propose a definition. In the second round, a focused list was presented, as well as the proposed definition elements. The finalised framework was sent to the panel for review. Sixteen experts participated. The final framework consists of 16 competencies for all and eight specific competencies for team leaders. The consensus definition describes non-technical skills as "a set of social (communication and team work) and cognitive (analytical and personal behaviour) skills that support high quality, safe, effective and efficient inter-professional care within the complex healthcare system". The authors have produced a new competency framework, through the works of an International expert panel, which is not discipline specific that can be used by curriculum developers, educational innovators and clinical teachers to support developments in the field.

Application of Semantic Approaches and Interactive Virtual Technology to Improve Teaching Effectiveness

ERIC Educational Resources Information Center

Jou, Min; Liu, Chi-Chia

2012-01-01

This article describes an implementation of interactive virtual environments that have been designed for supporting the education of technical skills in material processing technology. The developed web-based systems provide the capability to train students in the technical skills of material processing technology without the need to work on…

Presentation to US-Canada Bilateral Technical Working ...

EPA Pesticide Factsheets

DHS and EPA have collaborated in the development of a draft charter for Technical Working Group (TWG) to serve as the basis of negotiations of bilateral agreements with other countries. The TWG would provide a mechanism for sharing both response and R&D expertise and experience in the event of a CBRN incident. The membership of each TWG was tailored to provide appropriate support to the incident commander for the particular situation. Some of the same expertise has been engaged in response to the

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Minton-Summers, S.; Ray, C. D.

1996-01-01

A summary of work accomplished under Technical Task Agreement by the Marshall Space Flight Center (MSFC) documents activities regarding the Environmental Control and Life Support Systems (ECLSS) of the International Space Station (ISS) program. These MSFC activities were in-line to the designing, the development, the testing, and the flight of ECLSS equipment. MSFC's unique capabilities for performing integrated system testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs are the basis for the Technical Task Agreement activities. Tasks were completed in the Water Recovery Systems, Air Revitalization Systems, and microbiology areas. The results of each task is described in this summary report.

Collected Papers Prepared Under Work Unit TEXTRUCT: Methods of Instruction in Technical Training.

ERIC Educational Resources Information Center

Human Resources Research Organization, Alexandria, VA.

Although the concept of automated instruction is not new, it has gained major support only in the past 3 years. These 12 papers describe research in the area of instructional methods for technical training. The scientific principles of learning and their applicability to automated instruction are discussed, with emphasis on the role of automated…

Fifty Indices of Effectiveness Regarding the Program Advisory Committees in Minnesota's Technical Colleges: A Working Paper. Effective Advisory Committees Project.

ERIC Educational Resources Information Center

Mercer, John W.; Meunier, Greg R.

This document, which was developed by a task force whose members represent the instructional, student support service, administrative, and executive ranks of technical colleges with very diverse sizes, locations, and programs, lists 50 proposed indices of effectiveness regarding the program advisory committees (ACs) in Minnesota's technical…

Data Mining and Predictive Modeling in Institutional Advancement: How Ten Schools Found Success. Technical Report

ERIC Educational Resources Information Center

Luperchio, Dan

2009-01-01

This technical report, produced in partnership by the Council for Advancement and Support of Education (CASE) and SPSS Inc., explores the promise of data mining alumni records at educational institutions. Working with individual alumni records from The Johns Hopkins Zanvyl Krieger School of Arts and Sciences, a predictive regression model is…

Owning the program technical baseline for future space systems acquisition: program technical baseline tracking tool

NASA Astrophysics Data System (ADS)

Nguyen, Tien M.; Guillen, Andy T.; Hant, James J.; Kizer, Justin R.; Min, Inki A.; Siedlak, Dennis J. L.; Yoh, James

2017-05-01

The U.S. Air Force (USAF) has recognized the needs for owning the program and technical knowledge within the Air Force concerning the systems being acquired to ensure success. This paper extends the previous work done by the authors [1-2] on the "Resilient Program Technical Baseline Framework for Future Space Systems" and "Portfolio Decision Support Tool (PDST)" to the development and implementation of the Program and Technical Baseline (PTB) Tracking Tool (PTBTL) for the DOD acquisition life cycle. The paper describes the "simplified" PTB tracking model with a focus on the preaward phases and discusses how to implement this model in PDST.

Development of Technical Basis for Burnup Credit Regulatory Guidance in the United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parks, Cecil V; Wagner, John C; Mueller, Don

2011-01-01

In the United States (U.S.) there has been and continues to be considerable interest in the increased use of burnup credit as part of the safety basis for SNF systems and this interest has motivated numerous technical studies related to the application of burnup credit for maintaining subcriticality. Responding to industry requests and needs, the U.S. Nuclear Regulatory Commission initiated a burnup credit research program, with support from the Oak Ridge National Laboratory, to develop regulatory guidance and the supporting technical basis for allowing and expanding the use of burnup credit in pressurized-water reactor SNF storage and transport applications. Themore » objective of this paper is to summarize the work and significant accomplishments, with references to the technical reports and publications for complete details.« less

Unions, Contractors and CTE

ERIC Educational Resources Information Center

Jarosz, Francesca

2006-01-01

Across Illinois, in places where unions thrive, construction industry professionals and career and technical education (CTE) teachers are working together in promoting work-based learning program to students. Likewise, the outreach program provides union-supported contractors with qualified candidates for future employment. Programs such as the…

The role of organisational support in teleworker wellbeing: a socio-technical systems approach.

PubMed

Bentley, T A; Teo, S T T; McLeod, L; Tan, F; Bosua, R; Gloet, M

2016-01-01

The prevalence of telework and other forms of mobile working enabled by digital technology is increasing markedly. Following a socio-technical systems approach, this study aims to examine the role of organisational social support and specific support for teleworkers in influencing teleworker wellbeing, the mediating role of social isolation, potentially resulting from a person-environment mismatch in these relationships, and possible differences in these relationships between low-intensity and hybrid teleworkers. Teleworkers' (n = 804) perceptions of support and telework outcomes (psychological strain, job satisfaction, and social isolation) were collected using an on-line survey of teleworking employees distributed within 28 New Zealand organisations where knowledge work was undertaken. Organisational social support and teleworker support was associated with increased job satisfaction and reduced psychological strain. Social isolation mediated the relationship between organisational social support and the two outcome variables, and some differences were observed in the structural relationships for hybrid and low-intensity teleworker sub-samples. These findings suggest that providing the necessary organisational and teleworker support is important for enhancing the teleworker-environment fit and thereby ensuring desirable telework outcomes. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Definition of common support equipment and space station interface requirements for IOC model technology experiments

NASA Technical Reports Server (NTRS)

Russell, Richard A.; Waiss, Richard D.

1988-01-01

A study was conducted to identify the common support equipment and Space Station interface requirements for the IOC (initial operating capabilities) model technology experiments. In particular, each principal investigator for the proposed model technology experiment was contacted and visited for technical understanding and support for the generation of the detailed technical backup data required for completion of this study. Based on the data generated, a strong case can be made for a dedicated technology experiment command and control work station consisting of a command keyboard, cathode ray tube, data processing and storage, and an alert/annunciator panel located in the pressurized laboratory.

AACE: an innovative partnership to enhance aircraft safety

NASA Astrophysics Data System (ADS)

Shurtleff, William W.

1999-01-01

The Federal Aviation Administration established the Airworthiness Assurance Center of Excellence (AACE) in September 1997, through a cooperative agreement grant with Iowa State University (ISU) and The Ohio State University (OSU). A technical support contract with the Center is now in place as well. Initially the Center has five areas of concentration supporting advances in airworthiness assurance. These are 1. Maintenance, inspection, and repair, 2. Propulsion and fuel systems safety, 3. Crashworthiness, 4. Advanced materials, and 5. Landing gear systems performance and safety. AACE has nine core members who provide guidance to the Program Management Office at ISU/OSU through a Board of Directors. The core members are: Arizona State University, Iowa State University, Northwestern University, The Ohio State University, University of Dayton, University of Maryland, University of California - Los Angeles, Wichita State University, and Sandia National Laboratories. The organization also includes numerous academic affiliates, industry partners, government laboratories and other organizations. The Center now has over thirty technical projects supporting technical advances in airworthiness assurance. All these projects have industry guidance and support. This paper discusses the current technical program of the center and the highlights of the five-year plan for technical work. Also included is a description of the factors that make the Center an innovative partnership to promote aircraft safety.

ECLSS medical support activities

NASA Technical Reports Server (NTRS)

Crump, William J.; Kilgore, Melvin V., Jr.

1991-01-01

During the period from April 10, 1990 to April 9, 1991, the Consortium for the Space Life Sciences provided technical assistance to the NASA/MSFC water recovery efforts. This assistance was in the form of literature reviews, technical recommendations, and presentations. This final report summarizes the activities completed during this period and identifies those areas requiring additional efforts. The tasks which the University of Alabama in Huntsville (UAH) water recovery team addressed were either identified by MSFC technical representatives or chosen from those outlined in the subject statement of work.

Support of experimental high energy physics research at the University of South Carolina. Final technical report, 1980--1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Childers, R.L.; Darden, C.W.; Rosenfeld, C.

1992-12-31

Twelve years of support by the US Department of Energy have turned a two man team with no equipment and no graduate students working on a single experiment into an active group of four professors, one post-doctoral research associate and three graduate students working with appropriate equipment on three major experiments and several other projects. 162 references.

A Portrait of Non-Tenure-Track Faculty in Technical and Professional Communication: Results of a Pilot Study

ERIC Educational Resources Information Center

Meloncon, Lisa; England, Peter; Ilyasova, Alex

2016-01-01

We report the results of a pilot study that offers the field of technical and professional communication its first look at material working conditions of contingent faculty, such as course loads, compensation, and professional support. Findings include that contingent faculty are more enduring with stable full-time, multi-year contracts; they…

Space Interferometry Science Working Group

NASA Astrophysics Data System (ADS)

Ridgway, Stephen T.

1992-12-01

Decisions taken by the astronomy and astrophysics survey committee and the interferometry panel which lead to the formation of the Space Interferometry Science Working Group (SISWG) are outlined. The SISWG was formed by the NASA astrophysics division to provide scientific and technical input from the community in planning for space interferometry and in support of an Astrometric Interferometry Mission (AIM). The AIM program hopes to measure the positions of astronomical objects with a precision of a few millionths of an arcsecond. The SISWG science and technical teams are described and the outcomes of its first meeting are given.

A Study of Technical Engineering Peer Reviews at NASA

NASA Technical Reports Server (NTRS)

Chao, Lawrence P.; Tumer, Irem Y.; Bell, David G.

2003-01-01

This report describes the state of practices of design reviews at NASA and research into what can be done to improve peer review practices. There are many types of reviews at NASA: required and not, formalized and informal, programmatic and technical. Standing project formal reviews such as the Preliminary Design Review and Critical Design Review are a required part of every project and mission development. However, the technical, engineering peer reviews that support teams' work on such projects are informal, some times ad hoc, and inconsistent across the organization. The goal of this work is to identify best practices and lessons learned from NASA's experience, supported by academic research and methodologies to ultimately improve the process. This research has determined that the organization, composition, scope, and approach of the reviews impact their success. Failure Modes and Effects Analysis (FMEA) can identify key areas of concern before or in the reviews. Product definition tools like the Project Priority Matrix, engineering-focused Customer Value Chain Analysis (CVCA), and project or system-based Quality Function Deployment (QFD) help prioritize resources in reviews. The use of information technology and structured design methodologies can strengthen the engineering peer review process to help NASA work towards error-proofing the design process.

Kirtland Operations progress report, April--June 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Kirtland Operations (KO) is an integral part of EG G Energy Measurements, Inc., whose primary mission is to support the US Department of Energy's (DOE's) programs in weapons development and testing and in nuclear safeguards and security. KO performs much of its work in close coordination with and often at the technical direction of Sandia National Laboratories. In addition to aiding Sandia's weapons programs, KO provides a wide spectrum of technical support to other Sandia activities, particularly their safeguards, security, and treaty verification programs. Support is also provided to other elements of the Department of Energy community and to othermore » federal agencies, primarily in weapons testing and safeguards. This report documents our support to these programs from April to June 1991.« less

Kirtland Operations progress report, January--March 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Kirtland Operations (KO) is an integral part of EG G Energy Measurements, Inc., whose primary mission is to support the US Department of Energy's (DOE's) programs in weapons development and testing and in nuclear safeguards and security. KO performs much of its work in close coordination with and often at the technical direction of Sandia National Laboratories. In addition to aiding Sandia's weapons programs, KO provides a wide spectrum of technical support to other Sandia activities, particularly their safeguards, security, and treaty verification programs. Support is also provided to other elements of the Department of Energy community and to othermore » federal agencies, primarily in weapons testing and safeguards. This report documents our support to these porgrams from January to March 1991.« less

Kirtland Operations progress report, October--December 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Kirtland Operations (KO) is an integral part of EG G Energy Measurements, Inc., whose primary mission is to support the US Department of Energy's (DOE's) programs in weapons development and testing and in nuclear safeguards and security. KO performs much of its work in close coordination with and often at the technical direction of Sandia National Laboratories. In addition to aiding Sandia's weapons programs, KO provides a wide spectrum of technical support to other Sandia activities, particularly their safeguards, security, and treaty verification programs. Support is also provided to other elements of the Department of Energy community and to othermore » federal agencies, primarily in weapons testing and safeguards. This report documents our support to these programs from October to December 1991.« less

ICU staffing: identification and survey of staff involved in providing technical support services to Australian and New Zealand intensive care units.

PubMed

Carter, B G; Kiraly, N; Hochmann, M; Stephens, R; Osborne, A

2007-04-01

We conducted a survey of all (200) Australian and New Zealand intensive care units to determine the presence and nature of staff employed in a technical support role. Specifically, we attempted to identify staff who are formally employed in a role where they are directly responsible for the equipment used in intensive care. Of 130 returned surveys, 80 units (62%) reported not having any personnel in this role. In these units technical tasks were most commonly performed by registered nurses (79%) but were also performed by a variety of other personnel. Fifty units (38%), consisting of approximately 105 individuals providing a total of 84.3 EFTs and most commonly in public (84%) or metropolitan (70%) hospitals or level 3 (64%) intensive care units, did have one or more staff acting in a formal technical support role. The most common groups filling the technical support role were nurses (42%), technicians (24%), biomedical engineers (10%) and technologists (6%). The most common duties performed were equipment troubleshooting (92%), training (80%), equipment evaluation (80%), ordering supplies (77%), consumable evaluation (75%), equipment cleaning (73%), delivery of supplies (70%), handling product recalls (65%), equipment maintenance (65%) and sitting on hospital committees (52%). This is the first attempt to identify and understand the technical support role in Australian and New Zealand intensive care units. Numerous issues remain and future work will hopefully add to our findings, with the possibility of formal recognition of the role, training and/or accreditation and its extension into other hospital departments.

Report on Assessment of Work Atmosphere.

ERIC Educational Resources Information Center

Platte Technical Community Coll., Columbus, NE.

Seven sets of fifteen bi-polar adjectives corresponding to seven elements of organizational climate were compiled as a testing instrument which was administered to 124 working personnel at Platte Technical Community College in the fall of 1975. Respondents included faculty, students, support staff, and administrative personnel. Analysis of the…

Dane Christensen | NREL

Science.gov Websites

-performance building simulation. Dane supports technical efforts for the Building America Program and conducts finite element modeling for building energy simulation. Prior to joining NREL, Dane worked at Atec, Inc

Healthy Places for Healthy People 2017-2018 Application

EPA Pesticide Factsheets

Application for technical assistance to work with community leaders and health care partners to create downtowns and neighborhoods that can improve health, protect the environment, and support economic growth.

Involvement of Individuals in the Development of Technical Solutions and Rules of Management for Building Renovation Projects: A Case Study of Latvia

NASA Astrophysics Data System (ADS)

Pukite, I.; Grekis, A.; Geipele, I.; Zeltins, N.

2017-08-01

In March 2016, the Latvian government approved a new support program for increasing energy efficiency in residential apartment buildings. For the support of renovation of apartment buildings in the period from 2016 to 2023, 166 470 588 EUR will be available. Different persons, such as energy auditors, designers, architects, project managers and builders, will be involved in the process of planning, development and implementation of building renovation. At the development stage of the building renovation project, special attention should be devoted to the first stage - energy audit and technical project development. The problem arises due to the fact that each of these individuals, during the development of technical building documentation, does not work as a completely unified system. The implementation of construction project planning and organisational management system is one of the most important factors to guarantee that the quality of building renovation project is ensured in accordance with the laws and regulatory standards. The paper studies mutual cooperation, professionalism and the role of information feedback of personnel involved in the planning stage of building renovation, which is an essential prerequisite for the renovation process in order to achieve high quality of work and reduce the energy performance indicator. The present research includes the analysis of different technical solutions and their impact on energy efficiency. Mutual harmonisation of technical specifications is also investigated.

Vocational Training for Economic Development: A Report on Business/Industry Relationships with Kansas Community Colleges and Area Vocational-Technical Schools, 1990-91 Academic Year.

ERIC Educational Resources Information Center

Kansas State Board of Education, Topeka. Lifelong Learning Div.

In order to provide educational opportunities for entry into and advancement within the work force, Kansas' 19 public community colleges and 14 area vocational technical schools (AVTSs) have expanded their offerings to include customized training for businesses and industries within Kansas. Vocational training is also supported by the Kansas…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gauglitz, Phillip A.; Bontha, Jagannadha R.; Daniel, Richard C.

The Hanford Waste Treatment and Immobilization Plant (WTP) is currently being designed and constructed to pretreat and vitrify a large portion of the waste in the 177 underground waste storage tanks at the Hanford Site. A number of technical issues related to the design of the pretreatment facility (PTF) of the WTP have been identified. These issues must be resolved prior to the U.S. Department of Energy (DOE) Office of River Protection (ORP) reaching a decision to proceed with engineering, procurement, and construction activities for the PTF. One of the issues is Technical Issue T1 - Hydrogen Gas Release frommore » Vessels (hereafter referred to as T1). The focus of T1 is identifying controls for hydrogen release and completing any testing required to close the technical issue. In advance of selecting specific controls for hydrogen gas safety, a number of preliminary technical studies were initiated to support anticipated future testing and to improve the understanding of hydrogen gas generation, retention, and release within PTF vessels. These activities supported the development of a plan defining an overall strategy and approach for addressing T1 and achieving technical endpoints identified for T1. Preliminary studies also supported the development of a test plan for conducting testing and analysis to support closing T1. Both of these plans were developed in advance of selecting specific controls, and in the course of working on T1 it was decided that the testing and analysis identified in the test plan were not immediately needed. However, planning activities and preliminary studies led to significant technical progress in a number of areas. This report summarizes the progress to date from the preliminary technical studies. The technical results in this report should not be used for WTP design or safety and hazards analyses and technical results are marked with the following statement: “Preliminary Technical Results for Planning – Not to be used for WTP Design or Safety Analyses.”« less

Evidence-based decision-making for vaccine introductions: Overview of the ProVac International Working Group’s experience

PubMed Central

Jauregui, Barbara; Garcia, Ana Gabriela Felix; Janusz, Cara Bess; Blau, Julia; Munier, Aline; Atherly, Deborah; Mvundura, Mercy; Hajjeh, Rana; Lopman, Benjamin; Clark, Andrew David; Baxter, Louise; Hutubessy, Raymond; de Quadros, Ciro; Andrus, Jon Kim

2015-01-01

Introduction Pan American Health Organization’s (PAHO) ProVac Initiative aims to strengthen countries’ technical capacity to make evidence-based immunization policy. With financial support from the Bill and Melinda Gates Foundation, PAHO established the ProVac International Working Group (IWG), a platform created for two years to transfer the ProVac Initiative’s tools and methods to support decisions in non-PAHO regions. Methods In 2011, WHO Regional Offices and partner agencies established the IWG to transfer the ProVac framework for new vaccine decision support, including tools and trainings to other regions of the world. During the two year period, PAHO served as the coordinating secretariat and partner agencies played implementing or advisory roles. Results Fifty nine national professionals from 17 countries received training on the use of economic evaluations to aid vaccine policy making through regional workshops. The IWG provided direct technical support to nine countries to develop cost-effectiveness analyses to inform decisions. All nine countries introduced the new vaccine evaluated or their NITAGs have made a recommendation to the Ministry of Health to introduce the new vaccine. Discussion Developing countries around the world are increasingly interested in weighing the potential health impact due to new vaccine introduction against the investments required. During the two years, the ProVac approach proved valuable and timely to aid the national decision making processes, even despite the different challenges and idiosyncrasies encountered in each region. The results of this work suggest that: (1) there is great need and demand for technical support and for capacity building around economic evaluations; and (2) the ProVac method of supporting country-owned analyses is as effective in other regions as it has been in the PAHO region. Conclusion Decision support for new vaccine introduction in low- and middle-income countries is critical to guiding the efficient use of resources and prioritizing high impact vaccination programs. PMID:25919170

Evidence-based decision-making for vaccine introductions: Overview of the ProVac International Working Group's experience.

PubMed

Jauregui, Barbara; Garcia, Ana Gabriela Felix; Bess Janusz, Cara; Blau, Julia; Munier, Aline; Atherly, Deborah; Mvundura, Mercy; Hajjeh, Rana; Lopman, Benjamin; Clark, Andrew David; Baxter, Louise; Hutubessy, Raymond; de Quadros, Ciro; Andrus, Jon Kim

2015-05-07

Pan American Health Organization's (PAHO) ProVac Initiative aims to strengthen countries' technical capacity to make evidence-based immunization policy. With financial support from the Bill and Melinda Gates Foundation, PAHO established the ProVac International Working Group (IWG), a platform created for two years to transfer the ProVac Initiative's tools and methods to support decisions in non-PAHO regions. In 2011, WHO Regional Offices and partner agencies established the IWG to transfer the ProVac framework for new vaccine decision support, including tools and trainings to other regions of the world. During the two year period, PAHO served as the coordinating secretariat and partner agencies played implementing or advisory roles. Fifty nine national professionals from 17 countries received training on the use of economic evaluations to aid vaccine policy making through regional workshops. The IWG provided direct technical support to nine countries to develop cost-effectiveness analyses to inform decisions. All nine countries introduced the new vaccine evaluated or their NITAGs have made a recommendation to the Ministry of Health to introduce the new vaccine. Developing countries around the world are increasingly interested in weighing the potential health impact due to new vaccine introduction against the investments required. During the two years, the ProVac approach proved valuable and timely to aid the national decision making processes, even despite the different challenges and idiosyncrasies encountered in each region. The results of this work suggest that: (1) there is great need and demand for technical support and for capacity building around economic evaluations; and (2) the ProVac method of supporting country-owned analyses is as effective in other regions as it has been in the PAHO region. Decision support for new vaccine introduction in low- and middle-income countries is critical to guiding the efficient use of resources and prioritizing high impact vaccination programs. Copyright © 2015. Published by Elsevier Ltd.

Wood-Vasey DOE #SC0011834 Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood-Vasey, William Michael

During the past reporting period (Year 3), this grant has provided partial support for graduate students Daniel Perrefort and Kara Ponder. They have been working exploring different aspects of the technical work needed to take full advantage of the potential for cosmological inference using Type Ia supernovae (SNeIa) with LSST.

The NASA Herschel Science Center

NASA Astrophysics Data System (ADS)

Helou, G.

2005-12-01

NASA has set aside resources in support of US-based scientists working on analysis and interpretation of data from Herschel, and has designated IPAC as the home of the NASA Herschel Science Center (NHSC). In supporting the US-based Herschel community, NHSC will draw on its experience (ISO, Spitzer and other missions) as well as a close working relation with the Herschel mission and instrument expertise both in Europe and in the U.S. The support covers technical and logistical aspects as well as data analysis funding, to be handled in large measure following the Spitzer funding model.

California four cities program, 1971 - 1973. [aerospace-to-urban technology application

NASA Technical Reports Server (NTRS)

Macomber, H. L.; Wilson, J. H.

1974-01-01

A pilot project in aerospace-to-urban technology application is reported. Companies assigned senior engineering professionals to serve as Science and Technology Advisors to participating city governments. Technical support was provided by the companies and JPL. The cities, Anaheim, Fresno, Pasadena, and San Hose, California, provided the working environment and general service support. Each city/company team developed and carried out one or more technical or management pilot projects together with a number of less formalized technology efforts and studies. An account and evaluation is provided of the initial two-year phase of the program.

Kirtland Operations progress report, October--December 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Kirtland Operations (KO) is an integral part of EG&G Energy Measurements, Inc., whose primary mission is to support the US Department of Energy`s (DOE`s) programs in weapons development and testing and in nuclear safeguards and security. KO performs much of its work in close coordination with and often at the technical direction of Sandia National Laboratories. In addition to aiding Sandia`s weapons programs, KO provides a wide spectrum of technical support to other Sandia activities, particularly their safeguards, security, and treaty verification programs. Support is also provided to other elements of the Department of Energy community and to other federalmore » agencies, primarily in weapons testing and safeguards. This report documents our support to these programs from October to December 1991.« less

Kirtland Operations progress report, April--June 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Kirtland Operations (KO) is an integral part of EG&G Energy Measurements, Inc., whose primary mission is to support the US Department of Energy`s (DOE`s) programs in weapons development and testing and in nuclear safeguards and security. KO performs much of its work in close coordination with and often at the technical direction of Sandia National Laboratories. In addition to aiding Sandia`s weapons programs, KO provides a wide spectrum of technical support to other Sandia activities, particularly their safeguards, security, and treaty verification programs. Support is also provided to other elements of the Department of Energy community and to other federalmore » agencies, primarily in weapons testing and safeguards. This report documents our support to these programs from April to June 1991.« less

Geospatial Engineering

DTIC Science & Technology

2017-02-22

manages operations through guidance, policies, programs, and organizations. The NSG is designed to be a mutually supportive enterprise that...deliberate technical design and deliberate human actions. Geospatial engineer teams (GETs) within the geospatial intelligence cells are the day-to-day...standards working group and are designated by the AGC Geospatial Acquisition Support Directorate as required for interoperability. Applicable standards

Fusion Safety Program annual report, fiscal year 1994

NASA Astrophysics Data System (ADS)

Longhurst, Glen R.; Cadwallader, Lee C.; Dolan, Thomas J.; Herring, J. Stephen; McCarthy, Kathryn A.; Merrill, Brad J.; Motloch, Chester C.; Petti, David A.

1995-03-01

This report summarizes the major activities of the Fusion Safety Program in fiscal year 1994. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and Lockheed Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL, at other DOE laboratories, and at other institutions, including the University of Wisconsin. The technical areas covered in this report include tritium safety, beryllium safety, chemical reactions and activation product release, safety aspects of fusion magnet systems, plasma disruptions, risk assessment failure rate data base development, and thermalhydraulics code development and their application to fusion safety issues. Much of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed by the Fusion Safety Program for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor and of the technical support for commercial fusion facility conceptual design studies. A major activity this year has been work to develop a DOE Technical Standard for the safety of fusion test facilities.

Nanotechnology Standardization Activities – Support of U.S. Representation on ISO/TC 229 Nanotechnologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benko, Heather

In carrying out its responsibilities on behalf of the United States, ANSI provides comprehensive, administrative support and expertise on international protocols and procedures to: (1) the U.S. Technical Advisory Group (TAG) to the International Organization for Standardization’s (ISO) Technical Committee (TC) 229 Nanotechnologies, and (2) the corresponding U.S. TAG Working Groups tasked with formulating U.S. positions on topics relevant to nanotechnology standardization. Additionally, secretariat and procedural support is provided for the ISO/TC 229 WG 3 on health, safety and environment, for which the United States was assigned leadership by the participating national body members of ISO/TC 229. As the officialmore » entity that serves as the U.S. representative to ISO, ANSI provides not only expert coordination of U.S. positions and representation at ISO but also strategic direction, advice and procedural expertise to facilitate navigation of international issues to promote U.S. positions for incorporation into the ISO/TC 229 program of work necessary to support U.S. objectives.« less

Progress on the Development of the UAS C2 Link and Supporting Spectrum - from LOS to BLOS

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.; Griner, James H.; Bishop, William D.; Matolak, David W.; Wilson, Jeffrey D.

2017-01-01

In order to provide for the safe integration of unmanned aircraft systems (UAS) into the National Airspace System, the control and non-payload communications (CNPC) link connecting the ground-based pilot with the unmanned aircraft must be highly reliable and robust, based upon standards that enable certification. Both line-of-sight (LOS) links using terrestrial-based communications and beyond-line-of-sight (BLOS) links using satellite communications are required to support UAS operations. The development of standards has been undertaken by RTCA Special Committee 228 (SC-228), with supporting technical data developed by NASA under the UAS in the National Airspace (NAS) Project. As a result of this work minimum operational performance standards (MOPS) have been completed and published for the LOS CNPC system. The second phase of work, for both NASA and RTCA involves the BLOS CNPC systems. The development of technical data to support MOPS development for UAS BLOS satellite-based CNPC links has now been initiated by NASA, and RTCA SC-228 has organized itself to begin the MOPS development process. This paper will provide an overview of the work that has been completed to date by the Communications Subproject in support of LOS C2 communications for UAS followed by an update of plans and progress for the BLOS phase of the project, with the focus on the UAS C2 spectrum aspects.

Software Engineering Improvement Plan

NASA Technical Reports Server (NTRS)

2006-01-01

In performance of this task order, bd Systems personnel provided support to the Flight Software Branch and the Software Working Group through multiple tasks related to software engineering improvement and to activities of the independent Technical Authority (iTA) Discipline Technical Warrant Holder (DTWH) for software engineering. To ensure that the products, comments, and recommendations complied with customer requirements and the statement of work, bd Systems personnel maintained close coordination with the customer. These personnel performed work in areas such as update of agency requirements and directives database, software effort estimation, software problem reports, a web-based process asset library, miscellaneous documentation review, software system requirements, issue tracking software survey, systems engineering NPR, and project-related reviews. This report contains a summary of the work performed and the accomplishments in each of these areas.

Technical Support. Focus on Careers.

ERIC Educational Resources Information Center

Thiers, Naomi

1996-01-01

Describes work conditions, education and training needs, and salaries of the following technician careers: auto/diesel technicians, auto body repairers, general maintenance mechanics, heating/air conditioning/refrigeration, paralegals, engineering technicians, science technicians, computer repairers, and drafters. (SK)

Excess Weapons Plutonium Immobilization in Russia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jardine, L.; Borisov, G.B.

2000-04-15

The joint goal of the Russian work is to establish a full-scale plutonium immobilization facility at a Russian industrial site by 2005. To achieve this requires that the necessary engineering and technical basis be developed in these Russian projects and the needed Russian approvals be obtained to conduct industrial-scale immobilization of plutonium-containing materials at a Russian industrial site by the 2005 date. This meeting and future work will provide the basis for joint decisions. Supporting R&D projects are being carried out at Russian Institutes that directly support the technical needs of Russian industrial sites to immobilize plutonium-containing materials. Special R&Dmore » on plutonium materials is also being carried out to support excess weapons disposition in Russia and the US, including nonproliferation studies of plutonium recovery from immobilization forms and accelerated radiation damage studies of the US-specified plutonium ceramic for immobilizing plutonium. This intriguing and extraordinary cooperation on certain aspects of the weapons plutonium problem is now progressing well and much work with plutonium has been completed in the past two years. Because much excellent and unique scientific and engineering technical work has now been completed in Russia in many aspects of plutonium immobilization, this meeting in St. Petersburg was both timely and necessary to summarize, review, and discuss these efforts among those who performed the actual work. The results of this meeting will help the US and Russia jointly define the future direction of the Russian plutonium immobilization program, and make it an even stronger and more integrated Russian program. The two objectives for the meeting were to: (1) Bring together the Russian organizations, experts, and managers performing the work into one place for four days to review and discuss their work with each other; and (2) Publish a meeting summary and a proceedings to compile reports of all the excellent Russian plutonium immobilization contract work. This proceedings document presents the wide extent of Russian immobilization activities, provides a reference for their work, and makes it available to others.« less

Computational support of the laminar flow supersonic wind tunnel, CNSFV code development, Maglev, and grid generation

NASA Technical Reports Server (NTRS)

Klopfer, Goetz H.

1995-01-01

This final report covers the work done on corporate agreement NCC2-616 over a period of 5 1/2 years. It is broken into three segments of approximately 1 1/2 to 2 years each. The report is a summary report and is not intended to be comprehensive of all the work done under this corporate agreement. A more complete coverage of the work done is obtained from the papers and reports listed in the 'Papers' section. Additional reporting of significant work was done through 'Technical Highlights' and 'Research and Technical Summaries'. A listing of copies are given in the 'Technical Highlights and R and T' section. The work was also reported in a series of seminars, conference meetings, branch reviews, workshops, and project reviews. A list of these talks is given in the 'Presentation' section. Also during this time three students ranging from high school to graduate level were supervised. A list of the students and the type of work accomplished is given in the 'Mentoring' section. The report concludes with the 'Appendices' sections which include the three papers produced during the last 1 1/2 years of this corporate agreement.

Advanced Life Support Systems

NASA Technical Reports Server (NTRS)

Barta, Daniel J.

2004-01-01

This presentation is planned to be a 10-15 minute "catalytic" focused presentation to be scheduled during one of the working sessions at the TIM. This presentation will focus on Advanced Life Support technologies key to future human Space Exploration as outlined in the Vision, and will include basic requirements, assessment of the state-of-the-art and gaps, and include specific technology metrics. The presentation will be technical in character, lean heavily on data in published ALS documents (such as the Baseline Values and Assumptions Document) but not provide specific technical details or build to information on any technology mentioned (thus the presentation will be benign from an export control and a new technology perspective). The topics presented will be focused on the following elements of Advanced Life Support: air revitalization, water recovery, waste management, thermal control, habitation systems, food systems and bioregenerative life support.

Supporting Concrete Visual Thinking in Multiplicative Reasoning: Difficulties and Opportunities. Technical Report 88-16.

ERIC Educational Resources Information Center

Kaput, James J.

The Educational Technology Center has attempted to develop a series of computer based learning environments to support the learning and application of multiplicative reasoning. The work and software described in this paper, including the teaching experiment that generated the error phenomena examined, is part of a larger ongoing research project.…

"I Wanted To See If We Could Make It Work": Perspectives on Inclusive Childcare.

ERIC Educational Resources Information Center

Devore, Simone; Hanley-Maxwell, Cheryl

2000-01-01

A study explored how six childcare providers who have included children with special needs are able to provide care on a daily basis. Factors included the providers' commitment, finding the balance between resources and needs, problem-solving with parents, access to emotional support and technical assistance, and access to other supports.…

Bridging College and Careers: Using Dual Enrollment to Enhance Career and Technical Education Pathways. An NCPR Working Paper

ERIC Educational Resources Information Center

Rodriguez, Olga; Hughes, Katherine L.; Belfield, Clive

2012-01-01

The Concurrent Courses Initiative (CCI), funded by The James Irvine Foundation from 2008 until 2011, comprised eight secondary/postsecondary partnerships across California that offered dual enrollment programs with supplemental student supports. The goal of the CCI was to expand access to supportive, career-focused dual enrollment for students…

Avionics Simulation, Development and Software Engineering

NASA Technical Reports Server (NTRS)

2002-01-01

During this reporting period, all technical responsibilities were accomplished as planned. A close working relationship was maintained with personnel of the MSFC Avionics Department Software Group (ED14), the MSFC EXPRESS Project Office (FD31), and the Huntsville Boeing Company. Accomplishments included: performing special tasks; supporting Software Review Board (SRB), Avionics Test Bed (ATB), and EXPRESS Software Control Panel (ESCP) activities; participating in technical meetings; and coordinating issues between the Boeing Company and the MSFC Project Office.

Technical-Information Products for a National Volcano Early Warning System

USGS Publications Warehouse

Guffanti, Marianne; Brantley, Steven R.; Cervelli, Peter F.; Nye, Christopher J.; Serafino, George N.; Siebert, Lee; Venezky, Dina Y.; Wald, Lisa

2007-01-01

Introduction Technical outreach - distinct from general-interest and K-12 educational outreach - for volcanic hazards is aimed at providing usable scientific information about potential or ongoing volcanic activity to public officials, businesses, and individuals in support of their response, preparedness, and mitigation efforts. Within the context of a National Volcano Early Warning System (NVEWS) (Ewert et al., 2005), technical outreach is a critical process, transferring the benefits of enhanced monitoring and hazards research to key constituents who have to initiate actions or make policy decisions to lessen the hazardous impact of volcanic activity. This report discusses recommendations of the Technical-Information Products Working Group convened in 2006 as part of the NVEWS planning process. The basic charge to the Working Group was to identify a web-based, volcanological 'product line' for NVEWS to meet the specific hazard-information needs of technical users. Members of the Working Group were: *Marianne Guffanti (Chair), USGS, Reston VA *Steve Brantley, USGS, Hawaiian Volcano Observatory HI *Peter Cervelli, USGS, Alaska Volcano Observatory, Anchorage AK *Chris Nye, Division of Geological and Geophysical Surveys and Alaska Volcano Observatory, Fairbanks AK *George Serafino, National Oceanic and Atmospheric Administration, Camp Springs MD *Lee Siebert, Smithsonian Institution, Washington DC *Dina Venezky, USGS, Volcano Hazards Team, Menlo Park CA *Lisa Wald, USGS, Earthquake Hazards Program, Golden CO

[Investigation on pattern of quality control for Chinese materia medica based on famous-region drug and bioassay--the work reference].

PubMed

Yan, Dan; Xiao, Xiaohe

2011-05-01

Selection and standardization of the work reference are the technical issues to be faced with in the bioassay of Chinese materia medica. Taking the bioassay of Coptis chinensis. as an example, the manufacture process of the famous-region drugs extraction was explained from the aspects of original identification, routine examination, component analysis and bioassay. The common technologies were extracted, and the selection and standardization procedures of the work reference for the bioassay of Chinese materia medica were drawn up, so as to provide technical support for constructing a new mode and method of the quality control of Chinese materia medica based on the famous-region drugs and bioassay.

Landlord project multi-year program plan, fiscal year 1999, WBS 1.5

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dallas, M.D.

The MYWP technical baseline describes the work to be accomplished by the Project and the technical standards which govern that work. The mission of Landlord Project is to provide more maintenance replacement of general infrastructure facilities and systems to facilitate the Hanford Site cleanup mission. Also, once an infrastructure facility or system is no longer needed the Landlord Project transitions the facility to final closure/removal through excess, salvage or demolition. Landlord Project activities will be performed in an environmentally sound, safe, economical, prudent, and reliable manner. The Landlord Project consists of the following facilities systems: steam, water, liquid sanitary waste,more » electrical distribution, telecommunication, sanitary landfill, emergency services, general purpose offices, general purpose shops, general purpose warehouses, environmental supports facilities, roads, railroad, and the site land. The objectives for general infrastructure support are reflected in two specific areas, (1) Core Infrastructure Maintenance, and (2) Infrastructure Risk Mitigation.« less

Eleven Tribes Jump START Clean Energy Projects, Summer 2012 (Newsletter)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This newsletter describes key activities of the DOE Office of Indian Energy Policy and Programs for Summer 2012. The U.S. Department of Energy Office of Indian Energy Policy and Programs (DOE-IE) has selected 11 Tribes - five in Alaska and six in the contiguous United States - to receive on-the-ground technical support for community-based energy efficiency and renewable energy projects as part of DOE-IE's Strategic Technical Assistance Response Team (START) Program. START finalists were selected based on the clarity of their requests for technical assistance and the ability of START to successfully work with their projects or community. Technical expertsmore » from DOE and its National Renewable Energy Laboratory (NREL) will work directly with community-based project teams to analyze local energy issues and assist the Tribes in moving their projects forward. In Alaska, the effort will be bolstered by DOE-IE's partnership with the Denali Commission, which will provide additional assistance and expertise, as well as funding to fuel the Alaska START initiative.« less

Mirror Material Properties Compiled for Preliminary Design of the Next Generation Space Telescope (30 to 294 Kelvin)

NASA Technical Reports Server (NTRS)

Luz, P. L.; Rice, T.

1998-01-01

This technical memorandum reports on the mirror material properties that were compiled by NASA Marshall Space Flight Center (MSFC) from April 1996 to June 1997 for preliminary design of the Next Generation Space Telescope (NGST) Study. The NGST study began in February 1996, when the Program Development Directorate at NASA MSFC studied the feasibility of the NGST and developed the pre-phase A program for it. After finishing some initial studies and concepts development work on the NGST, MFSC's Program Development Directorate handed this work to the Observatory Projects Office at MSFC and then to NASA Goddard Space Flight Center (GSFC). This technical memorandum was written by MSFC's Preliminary Design Office and Materials and Processes Laboratory for the NGST Optical Telescope Assembly (OTA) team, in Support of NASA GSFC. It contains material properties for 9 mirror Substrate materials, using information from at least 6 industrial Suppliers, 16 textbooks, 44 technical papers, and 130 technical abstracts.

Exploration Medical System Technical Development

NASA Technical Reports Server (NTRS)

McGuire, K.; Middour, C.; Cerro, J.; Burba, T.; Hanson, A.; Reilly, J.; Mindock, J.

2017-01-01

The Exploration Medical Capability (ExMC) Element systems engineering goals include defining the technical system needed to implement exploration medical capabilities for Mars. This past year, scenarios captured in the medical system concept of operations laid the foundation for systems engineering technical development work. The systems engineering team analyzed scenario content to identify interactions between the medical system, crewmembers, the exploration vehicle, and the ground system. This enabled the definition of functions the medical system must provide and interfaces to crewmembers and other systems. These analyses additionally lead to the development of a conceptual medical system architecture. The work supports the ExMC community-wide understanding of the functional exploration needs to be met by the medical system, the subsequent development of medical system requirements, and the system verification and validation approach utilizing terrestrial analogs and precursor exploration missions.

Mentoring for Diversity and Equity: Focusing on Students of Color and New Teachers of Color

ERIC Educational Resources Information Center

Achinstein, Betty

2012-01-01

The task of preparing and supporting new teachers for working with diverse youth has generated widespread interest in induction and mentoring programs (Wang & Odell, 2002). However, much of mentoring in practice falls short of equity- and diversity-focused work. It can be better characterized as "situational adjustment, technical advice, and…

Fourth Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwantes, J. M.; Marsden, O.; Reilly, D.

Abstract The Nuclear Forensics International Technical Working Group is a community of nuclear forensic practitioners who respond to incidents involving nuclear and other radioactive material out of regulatory control. The Group is dedicated to advancing nuclear forensic science in part through periodic participation in materials exercises. The Group completed its fourth Collaborative Materials Exercise in 2015 in which laboratories from 15 countries and one multinational organization analyzed three samples of special nuclear material in support of a mock nuclear forensic investigation. This special section of the Journal for Radioanalytical and Nuclear Chemistry is devoted to summarizing highlights from this exercise.

Women's technical and professional symposium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Budil, K; Mack, L

1999-10-01

This is the fourth LLNL-sponsored Women's Technical and Professional Symposium. This year's theme: ''Excellence through the Millennium,'' focuses on the cutting edge work being done at LLNL and the many contributions of women to our science and technology mission. We hope this Symposium gives each person attending a better idea of the broad scope of the Laboratory's mission and their place within the organization. It is easy to lose sight of the fact that we all work in support of science and technology despite the diversity of our experience. This Symposium provides an opportunity to reflect on our past andmore » to begin to plan our future.« less

Enhancing Effective Stakeholder Participation in Local Groundwater Sustainability Planning through Technical Assistance in California

NASA Astrophysics Data System (ADS)

Weintraub, C.; Christian-Smith, J.; Dobbin, K.; Cullen, K.

2017-12-01

This presentation will share content from UCS's new publication, Getting Involved in Groundwater; A Guide to Effective Engagement in California's Groundwater Sustainability Plans, as well as lessons learned from collaborating with community organizations to provide technical assistance to Groundwater Sustainability Agency (GSA) board members and stakeholders in the San Joaquin Valley on Groundwater Sustainability Plan (GSP) development. California's Sustainable Groundwater Management Act (SGMA) mandates extensive stakeholder engagement, presenting an opportunity for unincorporated, low-income communities that have historically been affected by but not included in water decisions. However, implementation requires a concerted, thoughtful effort. Through technical assistance and strategic outreach, the Union of Concerned Scientists (UCS) is working to ensure stakeholder engagement in GSP development is robust, diverse, and supported by the best science available. UCS created the GSP stakeholder engagement guide to equip GSA members, scientists and interested community members to meaningfully engage in the GSP development process. The guide serves as a technical primer on SGMA's GSP process and as a resource for understanding groundwater management in California. The guide is just one component of a larger effort to overcome barriers to effective engagement in sustainable groundwater management, especially those presented by technical information. In April, UCS co-hosted a technical assistance workshop for GSA and advisory committee members in Visalia, CA with the Community Water Center (CWC), a local environmental justice non-profit. The workshop was well received and UCS and the CWC were invited to host a second workshop in June. To deepen this engagement and provide one-on-one technical assistance, UCS developed a program to match relevant water experts in the UCS Science Network with GSA members or involved community members in need of specific technical support. Through these efforts, UCS is working to break down barriers to participation and ensure sound science is incorporated into the GSP process.

Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program Implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liby, Alan L; Rogers, Hiram

The goal of this activity was to carry out program implementation and technical projects in support of the ARRA-funded Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program of the DOE Advanced Manufacturing Office (AMO) (formerly the Industrial Technologies Program (ITP)). The work was organized into eight projects in four materials areas: strategic materials, structural materials, energy storage and production materials, and advanced/field/transient processing. Strategic materials included work on titanium, magnesium and carbon fiber. Structural materials included work on alumina forming austentic (AFA) and CF8C-Plus steels. The advanced batteries and production materials projects included work onmore » advanced batteries and photovoltaic devices. Advanced/field/transient processing included work on magnetic field processing. Details of the work in the eight projects are available in the project final reports which have been previously submitted.« less

A formative evaluation of a coach-based technical assistance model for youth- and family-focused programming.

PubMed

Olson, Jonathan R; McCarthy, Kimberly J; Perkins, Daniel F; Borden, Lynne M

2018-04-01

The Children, Youth, and Families At-Risk (CYFAR) initiative provides funding and technical support for local community-based programs designed to promote positive outcomes among vulnerable populations. In 2013, CYFAR implemented significant changes in the way it provides technical assistance (TA) to grantees. These changes included introducing a new TA model in which trained coaches provide proactive support that is tailored to individual CYFAR projects. The purpose of this paper is to describe the evolution of this TA model and present preliminary findings from a formative evaluation. CYFAR Principal Investigators (PIs) were invited to respond to online surveys in 2015 and 2016. The surveys were designed to assess PI attitudes towards the nature and quality of support that they receive from their coaches. CYFAR PIs reported that their coaches have incorporated a range of coaching skills and techniques into their work. PIs have generally positive attitudes towards their coaches, and these attitudes have become more positive over time. Results suggest that CYFAR PIs have been generally supportive of the new TA system. Factors that may have facilitated support include a strong emphasis on team-building and the provision of specific resources that support program design, implementation, and evaluation. Copyright © 2017 Elsevier Ltd. All rights reserved.

ERTS-1 DCS technical support provided by Wallops Station. [ground truth stations and DCP repair depot

NASA Technical Reports Server (NTRS)

Smith, R.

1975-01-01

Wallops Station accepted the tasks of providing ground truth to several ERTS investigators, operating a DCP repair depot, designing and building an airborne DCP Data Acquisition System, and providing aircraft underflight support for several other investigators. Additionally, the data bank is generally available for use by ERTS and other investigators that have a scientific interest in data pertaining to the Chesapeake Bay area. Working with DCS has provided a means of evaluating the system as a data collection device possibly applicable to ongoing Earth Resources Program activities in the Chesapeake Bay area as well as providing useful data and services to other ERTS investigators. The two areas of technical support provided by Wallops, ground truth stations and repair for DCPs, are briefly discussed.

Communications data delivery system analysis : public workshop read-ahead document.

DOT National Transportation Integrated Search

2012-04-09

This document presents an overview of work conducted to date around development and analysis of communications data delivery systems for supporting transactions in the connected vehicle environment. It presents the results of technical analysis of co...

SEER Abstracting Tool (SEER*Abs)

Cancer.gov

With this customizable tool, registrars can collect and store data abstracted from medical records. Download the software and find technical support and reference manuals. SEER*Abs has features for creating records, managing abstracting work and data, accessing reference data, and integrating edits.

Wood tie track resistance characterization and correlations study

DOT National Transportation Integrated Search

1995-01-01

The work presented here is part of a major program to evaluate lateral buckling of continuous welded rail (CWR) tracks. The program to develop the technical information to support safety guidelines and specifications for track buckling prevention is ...

Support for designing waste sorting systems: A mini review.

PubMed

Rousta, Kamran; Ordoñez, Isabel; Bolton, Kim; Dahlén, Lisa

2017-11-01

This article presents a mini review of research aimed at understanding material recovery from municipal solid waste. It focuses on two areas, waste sorting behaviour and collection systems, so that research on the link between these areas could be identified and evaluated. The main results presented and the methods used in the articles are categorised and appraised. The mini review reveals that most of the work that offered design guidelines for waste management systems was based on optimising technical aspects only. In contrast, most of the work that focused on user involvement did not consider developing the technical aspects of the system, but was limited to studies of user behaviour. The only clear consensus among the articles that link user involvement with the technical system is that convenient waste collection infrastructure is crucial for supporting source separation. This mini review reveals that even though the connection between sorting behaviour and technical infrastructure has been explored and described in some articles, there is still a gap when using this knowledge to design waste sorting systems. Future research in this field would benefit from being multidisciplinary and from using complementary methods, so that holistic solutions for material recirculation can be identified. It would be beneficial to actively involve users when developing sorting infrastructures, to be sure to provide a waste management system that will be properly used by them.

ECUT (Energy Conversion and Utilization Technologies) program: Biocatalysis project

NASA Technical Reports Server (NTRS)

Baresi, Larry

1989-01-01

The Annual Report presents the fiscal year (FY) 1988 research activities and accomplishments, for the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Division. The ECUT Biocatalysis Project is managed by the Jet Propulsion Laboratory, California Institute of Technology. The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of universities, industrial companies and government research laboratories. The Project's technical activities were organized into three work elements: (1) The Molecular Modeling and Applied Genetics work element includes research on modeling of biological systems, developing rigorous methods for the prediction of three-dimensional (tertiary) protein structure from the amino acid sequence (primary structure) for designing new biocatalysis, defining kinetic models of biocatalyst reactivity, and developing genetically engineered solutions to the generic technical barriers that preclude widespread application of biocatalysis. (2) The Bioprocess Engineering work element supports efforts in novel bioreactor concepts that are likely to lead to substantially higher levels of reactor productivity, product yields and lower separation energetics. Results of work within this work element will be used to establish the technical feasibility of critical bioprocess monitoring and control subsystems. (3) The Bioprocess Design and Assessment work element attempts to develop procedures (via user-friendly computer software) for assessing the energy-economics of biocatalyzed chemical production processes, and initiation of technology transfer for advanced bioprocesses.

ECUT (Energy Conversion and Utilization Technologies) program: Biocatalysis project

NASA Astrophysics Data System (ADS)

Baresi, Larry

1989-03-01

The Annual Report presents the fiscal year (FY) 1988 research activities and accomplishments, for the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Division. The ECUT Biocatalysis Project is managed by the Jet Propulsion Laboratory, California Institute of Technology. The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of universities, industrial companies and government research laboratories. The Project's technical activities were organized into three work elements: (1) The Molecular Modeling and Applied Genetics work element includes research on modeling of biological systems, developing rigorous methods for the prediction of three-dimensional (tertiary) protein structure from the amino acid sequence (primary structure) for designing new biocatalysis, defining kinetic models of biocatalyst reactivity, and developing genetically engineered solutions to the generic technical barriers that preclude widespread application of biocatalysis. (2) The Bioprocess Engineering work element supports efforts in novel bioreactor concepts that are likely to lead to substantially higher levels of reactor productivity, product yields and lower separation energetics. Results of work within this work element will be used to establish the technical feasibility of critical bioprocess monitoring and control subsystems. (3) The Bioprocess Design and Assessment work element attempts to develop procedures (via user-friendly computer software) for assessing the energy-economics of biocatalyzed chemical production processes, and initiation of technology transfer for advanced bioprocesses.

[Location information acquisition and sharing application design in national census of Chinese medicine resources].

PubMed

Zhang, Xiao-Bo; Li, Meng; Wang, Hui; Guo, Lan-Ping; Huang, Lu-Qi

2017-11-01

In literature, there are many information on the distribution of Chinese herbal medicine. Limited by the technical methods, the origin of Chinese herbal medicine or distribution of information in ancient literature were described roughly. It is one of the main objectives of the national census of Chinese medicine resources, which is the background information of the types and distribution of Chinese medicine resources in the region. According to the national Chinese medicine resource census technical specifications and pilot work experience, census team with "3S" technology, computer network technology, digital camera technology and other modern technology methods, can effectively collect the location information of traditional Chinese medicine resources. Detailed and specific location information, such as regional differences in resource endowment and similarity, biological characteristics and spatial distribution, the Chinese medicine resource census data access to the accuracy and objectivity evaluation work, provide technical support and data support. With the support of spatial information technology, based on location information, statistical summary and sharing of multi-source census data can be realized. The integration of traditional Chinese medicine resources and related basic data can be a spatial integration, aggregation and management of massive data, which can help for the scientific rules data mining of traditional Chinese medicine resources from the overall level and fully reveal its scientific connotation. Copyright© by the Chinese Pharmaceutical Association.

Overview of NASA Langley's Systems Analysis Capabilities

NASA Technical Reports Server (NTRS)

Cavanaugh, Stephen; Kumar, Ajay; Brewer, Laura; Kimmel, Bill; Korte, John; Moul, Tom

2006-01-01

The Systems Analysis and Concepts Directorate (SACD) has been in the systems analysis business line supporting National Aeronautics and Space Administration (NASA) aeronautics, exploration, space operations and science since the 1960 s. Our current organization structure is shown in Figure 1. SACD mission can be summed up in the following statements: 1. We conduct advanced concepts for Agency decision makers and programs. 2. We provide aerospace systems analysis products such as mission architectures, advanced system concepts, system and technology trades, life cycle cost and risk analysis, system integration and pre-decisional sensitive information. 3. Our work enables informed technical, programmatic and budgetary decisions. SACD has a complement of 114 government employees and approximately 50 on-site contractors which is equally split between supporting aeronautics and exploration. SACD strives for technical excellence and creditability of the systems analysis products delivered to its customers. The Directorate office is continuously building market intelligence and working with other NASA centers and external partners to expand our business base. The Branches strive for technical excellence and credibility of our systems analysis products by seeking out existing and new partnerships that are critical for successful systems analysis. The Directorates long term goal is to grow the amount of science systems analysis business base.

Beyond bureaucracy: emerging trends in social care informatics.

PubMed

Wastell, David; White, Sue

2014-09-01

Existing information technology systems in much of UK social care have been designed to serve the interests of the bureaucracy rather than supporting professional practice or improving services to the public. The ill-starred Integrated Children's System in statutory children's services is typical. The Integrated Children's System is a system for form-filling, micro-managing professional practice through an enforced regime of standard processes and time scales. In this article, we argue against this dominant design. We provide several examples where technology has enabled alternative modes of support for professional work, based on socio-technical principles. One such system is Patchwork, which describes itself as a 'Facebook for Social Work'; its aim is to support multi-professional teams working with vulnerable families. © The Author(s) 2013.

OneGeology-Europe Plus Initiative

NASA Astrophysics Data System (ADS)

Capova, Dana; Kondrova, Lucie

2014-05-01

The Geological Surveys of the European countries hold valuable resources of geological data but, to discover, understand and use this data efficiently, a good level of standardization is essential. The OneGeology-Europe project had the aim of making geological maps at a scale 1:1M from Europe discoverable and accessible, available under a common data license and described by multilingual metainformation. A harmonized specification for basic geological map data was developed so that significant progress towards harmonizing the datasets was achieved. Responsibility for the management of the OneGeology-Europe portal has been taken by EuroGeoSurveys and provided by CGS and BRGM. Of the 34 members of EuroGeoSurveys (EGS), only 20 participated in the OneGeology-Europe project (Belgium, Czech Republic, Denmark, Estonia, Finland, France, Germany, Hungary, Ireland, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Sweden, Spain, United Kingdom), so the European area was not completely covered. At the 33rd General Meeting and Directors Workshop in 2012 it was therefore decided to establish a successor initiative OneGeology Europe Plus (1G-E+) with the purpose of extending the coverage by geological maps at a scale of 1:1 M to all the EGS member countries (including Albania, Austria, Bulgaria, Croatia, Cyprus, Greece, Iceland, Lithuania, Malta, Romania, Russia, Switzerland, Turkey, Ukraine) and also, if possible, to the other European countries (Belorussia, Bosnia and Herzegovina, Faeroe Islands, Kosovo, Latvia, Macedonia, Moldavia, Montenegro, Serbia). In order to achieve the desired result, it has been necessary for the new GSOs who intend to supply the additional 1G-E standardized services to carry out the work using their own staff and resources. The technical guidance and other support have been provided by the 1G-E+ Technical Support Team, funded from the internal budgets of their respective surveys. The team is coordinated by the Czech Geological Survey (CGS) working with the Bureau de Recherches Géologiques et Minières (BRGM), the British Geological Survey (BGS), the Geological Survey of Denmark and Greenland (GEUS) and the Geological Survey of Slovenia (GeoZS). The Geological Survey of the Netherlands (TNO) decided to provide financial support for the initiative. The Technical Support Team has been providing the technical advice required to enable the inclusion of geological maps from new countries in the 1G-E Portal using the standards developed and accepted for 1G-E. Cookbooks, on-line help and a helpdesk are provided during the work. A technical workshop was organized at which all the technical steps required to reach the target solution were presented and discussed. All newcomers must agree the existing common license that was created for downloading the 1G-E data. It should be emphasized that the results will be displayed as part of the 1G-E project and metadata/portal infrastructures. The process is still ongoing because the harmonization work for most of the countries involved has been a demanding process. Some countries are facing difficulties because of the lack of expert personnel or insufficient resources of data. Despite some problems, the 1G-E+ initiative and the work involved has contributed to effective networking and technical cooperation between the GSOs across the wider European region.

The Innovation Hyperlab - Linking Student Innovation at University and Pre-College Levels

NASA Astrophysics Data System (ADS)

Tagg, Randall

2012-02-01

We have created a laboratory environment to support collaboration between university and pre-college students on innovation and entrepreneurship projects. Called the ``Innovation Hyperlab,'' this facility is located in a K-12 complex called VistaPEAK schools in Aurora, Colorado. The lab is supported by four elements: a research-grade technical infrastructure of supplies and equipment for technical prototyping, a developing curriculum of ``learning modules on demand'' for rapid assimilation of technical skills, mentors from universities / medical schools / industry, and innovation projects stimulated by connections with the regional community. A current focus of projects is on medical technology development, linking tenth graders with university undergraduate research students and coordinated with the University of Colorado Denver's medical school. The Innovation Hyperlab is a work in progress and we will describe challenges that arise in connecting such a collaboration with traditional curriculum at both the university and pre-college levels.

Health support for the Raid of the Seven Stones : in the footsteps of Navy physician Jules Crevaux in French Guiana.

PubMed

Barthes, N; Boudsocq, J-P

2017-06-01

In the summer of 2015, soldiers of the 3rd Foreign Infantry Regiment and civilian scientists mounted a joint expedition on foot to reconnoiter and better define the southern frontier of French Guiana with Brazil. Three doctor-nurse pairs worked in relay to provide medical support for this unprecedented 42-day, 320-km journey through a hostile and isolated environment, a mission whose success was made possible by large-scale logistic and technical prowess. The army health department, using knowledge gained from previous large-scale missions and expeditions and from its staff's local experience, provided its technical support for personnel selection, organization of the health logistics, and field support. This article describes the difficulties encountered from a medical perspective, the diseases encountered, and the final assessments of the personnel who completed this expedition.

Working for a not-for-Profit Research and Development Organization in the Earth Sciences

NASA Astrophysics Data System (ADS)

McKague, h L

2001-12-01

The Southwest Research Institute (SwRI) is an independent not-for-profit applied engineering and physical sciences research and development organization. This means that SwRI owes no allegiance to organizations other than its clients. As a not-for-profit organization, SwRI reinvests its net income into the organization to improve, strengthen, and expand facilities and to support internal research and development projects. Located in San Antonio, Texas, on 1200 acres, SwRI employs nearly 2800 staff and occupies nearly 2,000,000 square feet of office space. Its business is about equally divided between commercial and government clients, most of whom have specific scientific and technical problems that need to be solved in a timely, cost-effective manner. Governmental clients include local, state, and federal agencies and foreign governments. Commercial clients include local, national, and international businesses. Earth science disciplines at SwRI include geology, geophysics, hydrology, geochemistry, rock mechanics, mining engineering, and natural hazard assessment. Our overall approach is to systematically examine client problems and develop solutions that may include field work, laboratory work, numerical modeling, or some combination of these approaches. This method of problem solving places a strong emphasis on interdisciplinary teamwork. The work environment at SwRI strikes a balance among the freedom to attack technically important problems, consistent support to professional development, and a strong commitment to meeting client's deadlines and goals. Real problems with real consequences are routinely solved on a tight schedule. The diversity of clients gives exposure to an extraordinarily wide range of problems. Successful employees have sound technical backgrounds, are flexible in accommodating varying clients needs, bring creativity and energy to problem solving and applications of technologies, can work on multiple tasks in parallel, and can communicate clearly with clients and other team members. Professional development is supported through encouragement of continuing education, as well as publication and presentation of professional work. An overview of the earth science staff and work at SwRI can be found at http://www.swri.edu/4org/d20/d20home.htm

Space and Earth Sciences, Computer Systems, and Scientific Data Analysis Support, Volume 1

NASA Technical Reports Server (NTRS)

Estes, Ronald H. (Editor)

1993-01-01

This Final Progress Report covers the specific technical activities of Hughes STX Corporation for the last contract triannual period of 1 June through 30 Sep. 1993, in support of assigned task activities at Goddard Space Flight Center (GSFC). It also provides a brief summary of work throughout the contract period of performance on each active task. Technical activity is presented in Volume 1, while financial and level-of-effort data is presented in Volume 2. Technical support was provided to all Division and Laboratories of Goddard's Space Sciences and Earth Sciences Directorates. Types of support include: scientific programming, systems programming, computer management, mission planning, scientific investigation, data analysis, data processing, data base creation and maintenance, instrumentation development, and management services. Mission and instruments supported include: ROSAT, Astro-D, BBXRT, XTE, AXAF, GRO, COBE, WIND, UIT, SMM, STIS, HEIDI, DE, URAP, CRRES, Voyagers, ISEE, San Marco, LAGEOS, TOPEX/Poseidon, Pioneer-Venus, Galileo, Cassini, Nimbus-7/TOMS, Meteor-3/TOMS, FIFE, BOREAS, TRMM, AVHRR, and Landsat. Accomplishments include: development of computing programs for mission science and data analysis, supercomputer applications support, computer network support, computational upgrades for data archival and analysis centers, end-to-end management for mission data flow, scientific modeling and results in the fields of space and Earth physics, planning and design of GSFC VO DAAC and VO IMS, fabrication, assembly, and testing of mission instrumentation, and design of mission operations center.

The Berry Informational Technology (B.I.T.S.) Student Work Program: An Effective Environment for Collaborative Learning, Leadership, Technological Training, and Certification.

ERIC Educational Resources Information Center

Cornelius, Amy; Macaluso, Paul

The Berry Informational Technology (B.I.T.S.) program at Berry College (Georgia) is an apprenticeship opportunity associated with student work. The program gives students the opportunity to seek technological training in areas, such as building computer systems, trouble-shooting, networking, Web development, and user and technical support. In…

Draft project management update to the Iowa DOT Project Development Manual : final report.

DOT National Transportation Integrated Search

2016-08-01

This work supported drafting project management guidance for the Iowa Department of Transportation (DOT). The goal is to : incorporate a greater focus on project management in their project development process. : A technical advisory committee (TAC) ...

Carbon storage in US wetlands

EPA Science Inventory

This Nature Communications article is a product of legacy work that contributes to Safe and Sustainable Water Resources research on technical support and research on the enhancement of Office of Water’s National Aquatic Resource Surveys (NARS) (SSWR 3.01A). The research is...

[Effect of work and organizational characteristics on workers in call centers: longitudinal study in an information service company].

PubMed

Tei, Maki; Yamazaki, Yoshihiko

2005-09-01

To investigate the effect of work and organizational characteristics on workers' health status, with job dissatisfaction and intentions to leave as "organizational health", we conducted a longitudinal study using a questionnaire survey in call centers of an information service company from July to August in 2001 and 2002. The response rates were 96.2% and 92.0%, respectively. For the statistical analysis, the completed data of 296 technical support staff, which was more than 80% of the data, was used. We identified seven subscales composed of 29 items of work and organizational characteristics as scales of "organizational characteristics" and "work and workplace characteristics". The results of hierarchical multiple regression analysis showed quantitative and qualitative job-overload influenced psychological health status and poor supervisor support influenced all outcome variables. Moreover, "organizational characteristics" influenced cumulative fatigue and job dissatisfaction, showing an indirect effect with poor supervisor support and coworker support. This study suggests that measures of work and organizational characteristics are useful interventions for "organizational health".

Emerging Sealing Technologies Development

NASA Technical Reports Server (NTRS)

2005-01-01

Under this Cooperative Agreement, the objective was to investigate several emerging sealing technologies of interest to the Mechanical Components Branch of National Aeronautics and Space Administration Glenn Research Center at Lewis Field (NASA GRC). The majority of the work conducted was to support the development of Solid Oxide Fuel Cells for application to aeronautic auxiliary power units, though technical investigations of interest to other groups and projects were also conducted. In general, accomplishments and results were periodically reported to the NASA Technical Monitor, the NASA GRC Seal Team staff, and NASA GRC project management. Several technical reports, journal articles, and presentations were given internally to NASA GRC and to the external public.

Final Technical Report of Project DE-FG02-96ER14647

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lundeen, Stephen R.

This is the final technical report of work completed under DOE support over the period Sept. 1, 1996 until May 31, 2015. The title of the project was "Ion/Excited Atom Collision Studies with a Rydberg Target and a CO2 Laser" from 9/1/96 to 10/31/06, and "Properties of Actinide Ions from Measurements of Rydberg Ion Fine Structure" from 11/1/06 until 5/31/15. The primary technical results were a detailed experimental study of resonant charge transfer between Rydberg atoms and highly-charged ions, and unique measurements of many properties of multiply-charged Thorium ions.

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Ray, C. D. (Compiler); Salyer, B. H. (Compiler)

1999-01-01

This Technical Memorandum provides a summary of current work accomplished under Technical Task Agreement (TTA) by the Marshall Space Flight Center (MSFC) regarding the International Space Station (ISS) Environmental Control and Life Support System (ECLSS). Current activities include ECLSS component design and development, computer model development, subsystem/integrated system testing, life testing, and general test support provided to the ISS program. Under ECLSS design, MSFC was responsible for the six major ECLSS functions, specifications and standard, component design and development, and was the architectural control agent for the ISS ECLSS. MSFC was responsible for ECLSS analytical model development. In-house subsystem and system level analysis and testing were conducted in support of the design process, including testing air revitalization, water reclamation and management hardware, and certain nonregenerative systems. The activities described herein were approved in task agreements between MSFC and NASA Headquarters Space Station Program Management Office and their prime contractor for the ISS, Boeing. These MSFC activities are in line to the designing, development, testing, and flight of ECLSS equipment planned by Boeing. MSFC's unique capabilities for performing integrated systems testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs, are the basis for the TTA activities.

Improving automation standards via semantic modelling: Application to ISA88.

PubMed

Dombayci, Canan; Farreres, Javier; Rodríguez, Horacio; Espuña, Antonio; Graells, Moisès

2017-03-01

Standardization is essential for automation. Extensibility, scalability, and reusability are important features for automation software that rely in the efficient modelling of the addressed systems. The work presented here is from the ongoing development of a methodology for semi-automatic ontology construction methodology from technical documents. The main aim of this work is to systematically check the consistency of technical documents and support the improvement of technical document consistency. The formalization of conceptual models and the subsequent writing of technical standards are simultaneously analyzed, and guidelines proposed for application to future technical standards. Three paradigms are discussed for the development of domain ontologies from technical documents, starting from the current state of the art, continuing with the intermediate method presented and used in this paper, and ending with the suggested paradigm for the future. The ISA88 Standard is taken as a representative case study. Linguistic techniques from the semi-automatic ontology construction methodology is applied to the ISA88 Standard and different modelling and standardization aspects that are worth sharing with the automation community is addressed. This study discusses different paradigms for developing and sharing conceptual models for the subsequent development of automation software, along with presenting the systematic consistency checking method. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Supporting breast-feeding women from the perspective of the midwife: A systematic review of the literature.

PubMed

Swerts, Marlies; Westhof, Ellen; Bogaerts, Annick; Lemiengre, Joke

2016-06-01

In 2003 the World Health Organization (WHO) recommended that infants should be fed exclusively with breast milk until the age of six months. However, breast feeding rates remain lower than recommended. The crucial period for breast feeding support is the first two weeks after birth. During this period breast feeding support from the midwife is needed. The aim of this paper is to gain an in-depth understanding of the role of midwives in their support of breast-feeding women, from their own perspective. Two researchers independently conducted a systematic and comprehensive literature search. Studies needed an empirical qualitative research design (1), had to focus on the role of the midwife in the support of the breast-feeding woman from the midwife's perspective (2), and had to be published between January 2005 and December 2014 (3) in order to be included. Language restrictions were English, Dutch, German and French. Eight qualitative research studies were included, using mainly focus group and in-depth interview studies, which were reported in 11 papers representing 231 midwives and 24 maternity nurses. All but one study concerned midwives working in hospital settings. A critical appraisal was performed of each study. Midwives value breast feeding education and breast feeding support as a significant part of their role as a postnatal midwife. However, the ways in which a midwife approaches and supports the breast-feeding woman vary. We distinguished two perspectives: 'the midwife as technical expert' and 'the midwife as a skilled companion'. The 'technical expert' midwife is mainly breast centred, focuses on techniques, uses the hands on approach and sees a woman as a novice. The 'skilled companion' midwife is woman centred, focuses on the mother - infant relationship and uses a hands off approach during the breast feeding support. The midwives working in a hospital setting face many barriers when performing breast feeding support, such as time restraints, which makes it difficult for them to carry out their preferred role as a 'skilled companion'. These barriers can influence the breast feeding support negatively. Supporting factors, such as evidence based breast feeding guidelines, have a positive influence on the breast feeding support. On the basis of findings of a synthesis of qualitative research studies, we conclude that the majority of the midwives provide breast feeding support as a technical expert and a minority as a skilled companion. Midwives prefer to be a skilled companion but face many barriers in their working contexts. Copyright © 2016. Published by Elsevier Ltd.

Parameter identification for nonlinear aerodynamic systems

NASA Technical Reports Server (NTRS)

Pearson, Allan E.

1993-01-01

This final technical report covers a three and one-half year period preceding February 28, 1993 during which support was provided under NASA Grant NAG-1-1065. Following a general description of the system identification problem and a brief survey of methods to attack it, the basic ideas behind the approach taken in this research effort are presented. The results obtained are described with reference to the published work, including the five semiannual progress reports previously submitted and two interim technical reports.

Networks Technology Conference

NASA Technical Reports Server (NTRS)

Tasaki, Keiji K. (Editor)

1993-01-01

The papers included in these proceedings represent the most interesting and current topics being pursued by personnel at GSFC's Networks Division and supporting contractors involved in Space, Ground, and Deep Space Network (DSN) technical work. Although 29 papers are represented in the proceedings, only 12 were presented at the conference because of space and time limitations. The proceedings are organized according to five principal technical areas of interest to the Networks Division: Project Management; Network Operations; Network Control, Scheduling, and Monitoring; Modeling and Simulation; and Telecommunications Engineering.

CFD Aerothermodynamic Characterization Of The IXV Hypersonic Vehicle

NASA Astrophysics Data System (ADS)

Roncioni, P.; Ranuzzi, G.; Marini, M.; Battista, F.; Rufolo, G. C.

2011-05-01

In this paper, and in the framework of the ESA technical assistance activities for IXV project, the numerical activities carried out by ASI/CIRA to support the development of Aerodynamic and Aerothermodynamic databases, independent from the ones developed by the IXV Industrial consortium, are reported. A general characterization of the IXV aerothermodynamic environment has been also provided for cross checking and verification purposes. The work deals with the first year activities of Technical Assistance Contract agreed between the Italian Space Agency/CIRA and ESA.

Orbital transfer vehicle concept definition and system analysis study. Volume 2: OTV concept definition and evaluation. Book 3: Subsystem trade studies

NASA Technical Reports Server (NTRS)

Dickman, Glen J.

1987-01-01

The technical trade studies and analyses reported in this book represent the accumulated work of the technical staff for the contract period. The general disciplines covered are as follows: (1) Guidance, Navigation, and Control; (2) Avionics Hardware; (3) Aeroassist Technology; (4) Propulsion; (5) Structure and Materials; and (6) Thermal Control Technology. The objectives in each of these areas were to develop the latest data, information, and analyses in support of the vehicle design effort.

Task 2 Report - A GIS-Based Technical Potential Assessment of Domestic Energy Resources for Electricity Generation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Nathan; Grue, Nicholas W; Rosenlieb, Evan

The purpose of this report is to support the Lao Ministry of Energy and Mines in assessing the technical potential of domestic energy resources for utility scale electricity generation in the Lao PDR. Specifically, this work provides assessments of technical potential, and associated maps of developable areas, for energy technologies of interest. This report details the methodology, assumptions, and datasets employed in this analysis to provide a transparent, replicable process for future analyses. The methodology and results presented are intended to be a fundamental input to subsequent decision making and energy planning-related analyses. This work concentrates on domestic energy resourcesmore » for utility-scale electricity generation and considers solar photovoltaic, wind, biomass, and coal resources. This work does not consider potentially imported energy resources (e.g., natural gas) or domestic energy resources that are not present in sufficient quantity for utility-scale generation (e.g., geothermal resources). A technical potential assessment of hydropower resources is currently not feasible due to the absence of required data including site-level assessments of multiple characteristics (e.g., geology environment and access) as well as spatial data on estimated non-exploited hydropower resources. This report is the second output of the Energy Alternatives Study for the Lao PDR, a collaboration led by the Lao Ministry of Energy and Mines and the United States Agency for International Development under the auspices of the Smart Infrastructure for the Mekong program. The Energy Alternatives Study is composed of five successive tasks that collectively support the project's goals. This work is focused on Task 2 - Assess technical potential of domestic energy resources for electricity generation. The work was carried out by a team from the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) in collaboration with the Lao Ministry of Energy and Mines and other Lao power sector stakeholders. and datasets employed in this analysis to provide a transparent, replicable process for future analyses. The methodology and results presented are intended to be a fundamental input to subsequent decision making and energy planning-related analyses. This work concentrates on domestic energy resources for utility-scale electricity generation and considers solar photovoltaic, wind, biomass, and coal resources. This work does not consider potentially imported energy resources (e.g., natural gas) or domestic energy resources that are not present in sufficient quantity for utility-scale generation (e.g., geothermal resources). A technical potential assessment of hydropower resources is currently not feasible due to the absence of required data including site-level assessments of multiple characteristics (e.g., geology environment and access) as well as spatial data on estimated non-exploited hydropower resources.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Overview of NREL's work in Alaska. NREL provides objective, data-driven support to aid decision-makers in Alaska as they deploy advanced energy technologies and reduce energy burdens across the nation's largest state. NREL's technical assistance, research, and outreach activities are providing the catalyst for transforming the way Alaska uses energy.

Creation Stations.

ERIC Educational Resources Information Center

Sauer, Jeff; Murphy, Sam

1997-01-01

In this comparison, NewMedia lab looks at 10 Pentium II workstations preconfigured for demanding three dimensional and multimedia work with OpenGL cards and fast Ultra SCSI hard drives. Highlights include costs, tests with Photoshop, technical support, and a sidebar that explains Accelerated Graphics Port. (Author/LRW)

Fact Sheet: Documenting Ground-Water Models Selection at Site Contaminated with Radioactive Substance

EPA Pesticide Factsheets

This fact sheet summarizes the report by a joint Interagency Environmental Pathway Modeling Working Group. It was designed to be used by technical staff responsible for identifying and implementing flow and transport models to support cleanup decisions.

ACHP | Federal Programs that Can Support Heritage Tourism

Science.gov Websites

farmers and ranchers in exploring alternate economic enterprises, including heritage tourism.(http Rural Business Enterprise Grants, Rural Business Opportunity Grants, and Rural Economic Development /td/mdcp/) Public Works, Economic Adjustment, Planning, and Research and Technical Assistance Programs

Implementation of GPS Machine Controlled Grading - Phase III (2008) and Technical Training

DOT National Transportation Integrated Search

2009-02-01

Beginning in 2006, WisDOT and the Construction Material and Support Center (CMSC) at UW-Madison worked together to develop the specifications and the QA/QC procedures for GPS machine guidance on highway grading projects. These specifications and proc...

JPL Innovation Foundry

NASA Technical Reports Server (NTRS)

Sherwood, Brent; McCleese, Daniel J.

2012-01-01

NASA supports the community of mission principal investigators by helping them ideate, mature, and propose concepts for new missions. As NASA's Federally Funded Research and Development Center (FFRDC), JPL is a primary resource for providing this service. The environmental context for the formulation lifecycle evolves continuously. Contemporary trends include: more competitors; more-complex mission ideas; scarcer formulation resources; and higher standards for technical evaluation. Derived requirements for formulation support include: stable, clear, reliable methods tailored for each stage of the formulation lifecycle; on-demand access to standout technical and programmatic subject-matter experts; optimized, outfitted facilities; smart access to learning embodied in a vast oeuvre of prior formulation work; hands-on method coaching. JPL has retooled its provision of integrated formulation lifecycle support to PIs, teams, and program offices in response to this need. This mission formulation enterprise is the JPL Innovation Foundry.

Assessment of the Technical Maturity of Generation IV Concepts for Test or Demonstration Reactor Applications, Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gougar, Hans David

2015-10-01

The United States Department of Energy (DOE) commissioned a study the suitability of different advanced reactor concepts to support materials irradiations (i.e. a test reactor) or to demonstrate an advanced power plant/fuel cycle concept (demonstration reactor). As part of the study, an assessment of the technical maturity of the individual concepts was undertaken to see which, if any, can support near-term deployment. A Working Group composed of the authors of this document performed the maturity assessment using the Technical Readiness Levels as defined in DOE’s Technology Readiness Guide . One representative design was selected for assessment from of each ofmore » the six Generation-IV reactor types: gas-cooled fast reactor (GFR), lead-cooled fast reactor (LFR), molten salt reactor (MSR), supercritical water-cooled reactor (SCWR), sodium-cooled fast reactor (SFR), and very high temperature reactor (VHTR). Background information was obtained from previous detailed evaluations such as the Generation-IV Roadmap but other technical references were also used including consultations with concept proponents and subject matter experts. Outside of Generation IV activity in which the US is a party, non-U.S. experience or data sources were generally not factored into the evaluations as one cannot assume that this data is easily available or of sufficient quality to be used for licensing a US facility. The Working Group established the scope of the assessment (which systems and subsystems needed to be considered), adapted a specific technology readiness scale, and scored each system through discussions designed to achieve internal consistency across concepts. In general, the Working Group sought to determine which of the reactor options have sufficient maturity to serve either the test or demonstration reactor missions.« less

U.S. Department of Energy Pacific Region Clean Energy Application Center (PCEAC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lipman, Tim; Kammen, Dan; McDonell, Vince

2013-09-30

The U.S. Department of Energy Pacific Region Clean Energy Application Center (PCEAC) was formed in 2009 by the U.S. Department of Energy (DOE) and the California Energy Commission to provide education, outreach, and technical support to promote clean energy -- combined heat and power (CHP), district energy, and waste energy recovery (WHP) -- development in the Pacific Region. The region includes California, Nevada, Hawaii, and the Pacific territories. The PCEAC was operated as one of nine regional clean energy application centers, originally established in 2003/2004 as Regional Application Centers for combined heat and power (CHP). Under the Energy Independence andmore » Security Act of 2007, these centers received an expanded charter to also promote district energy and waste energy recovery, where economically and environmentally advantageous. The centers are working in a coordinated fashion to provide objective information on clean energy system technical and economic performance, direct technical assistance for clean energy projects and additional outreach activities to end users, policy, utility, and industry stakeholders. A key goal of the CEACs is to assist the U.S. in achieving the DOE goal to ramp up the implementation of CHP to account for 20% of U.S. generating capacity by 2030, which is estimated at a requirement for an additional 241 GW of installed clean technologies. Additional goals include meeting the Obama Administration goal of 40 GW of new CHP by 2020, key statewide goals such as renewable portfolio standards (RPS) in each state, California’s greenhouse gas emission reduction goals under AB32, and Governor Brown’s “Clean Energy Jobs Plan” goal of 6.5 GW of additional CHP over the next twenty years. The primary partners in the PCEAC are the Department of Civil and Environmental Engineering and the Energy and Resources Group (ERG) at UC Berkeley, the Advanced Power and Energy Program (APEP) at UC Irvine, and the Industrial Assessment Centers (IAC) at San Diego State University and San Francisco State University. The center also worked with a wide range of affiliated groups and industry, government, NGO, and academic stakeholders to conduct a series of CHP education and outreach, project technical support, and related activities for the Pacific region. Key PCEAC tasks have included: - Preparing, organizing and conducting educational seminars on various aspects of CHP - Conducting state baseline assessments for CHP - Working with state energy offices to prepare state CHP action plans - Providing technical support services including CHP/district energy project feasibility screenings - Working with state agencies on CHP policy development - Developing additional CHP educational materials The primary specific services that PCEAC has offered include: - A CHP “information clearinghouse “ website: http://www.pacificcleanenergy.org - Site evaluations and potential projects screenings - Assessment of CHP status, potential, and key issues for each state - Information and training workshops - Policy and regulatory guidance documents and other interactions These services were generally offered at no cost to client groups based on the DOE funding and additional activities supported by the California Energy Commission, except for the in-kind staff resources needed to provide input data and support to PCEAC assessments at host sites. Through these efforts, the PCEAC reached thousands of end-users and directly worked with several dozen organizations and potential CHP “host sites” from 2009-2013. The major activities and outcomes of PCEAC project work are described.« less

Engineering Technical Support Center Annual Report Fiscal Year 2015

EPA Science Inventory

The United States Environmental Protection Agency (EPA or Agency) Office of Research and Development (ORD) created the Engineering Technical Support Center (ETSC) in 1987, one of several technical support centers created as part of the Technical Support Project (TSP). ETSC provid...

Knowledge-based graphical interfaces for presenting technical information

NASA Technical Reports Server (NTRS)

Feiner, Steven

1988-01-01

Designing effective presentations of technical information is extremely difficult and time-consuming. Moreover, the combination of increasing task complexity and declining job skills makes the need for high-quality technical presentations especially urgent. We believe that this need can ultimately be met through the development of knowledge-based graphical interfaces that can design and present technical information. Since much material is most naturally communicated through pictures, our work has stressed the importance of well-designed graphics, concentrating on generating pictures and laying out displays containing them. We describe APEX, a testbed picture generation system that creates sequences of pictures that depict the performance of simple actions in a world of 3D objects. Our system supports rules for determining automatically the objects to be shown in a picture, the style and level of detail with which they should be rendered, the method by which the action itself should be indicated, and the picture's camera specification. We then describe work on GRIDS, an experimental display layout system that addresses some of the problems in designing displays containing these pictures, determining the position and size of the material to be presented.

Technical Support for Contaminated Sites | Science Inventory ...

EPA Pesticide Factsheets

In 1987, the U.S. Environmental Protection Agency’s (EPA) Office of Research and Development (ORD), Office of Land and Emergency Management, and EPA Regional waste management offices established the Technical Support Project. The creation of the Technical Support Project enabled ORD to provide effective technical assistance by ensuring ORD scientists and engineers were accessible to the Agency’s Office and Regional decision makers, including Remedial Project Managers, On-Scene Coordinators, and corrective action staff. Five ORD Technical Support Centers (TSCs) were created to facilitate this technical assistance. Three of the five TSCs are supported by the Sustainable and Healthy Communities Research Program, and are summarized in the poster being presented:• Engineering Technical Support Center (ETSC) in Cincinnati, Ohio• Ground Water Technical Support Center (GWTSC) in Ada, Oklahoma• Site Characterization and Monitoring Technical Support Center (SCMTSC) in Atlanta, GeorgiaOver the past 29 years, the Technical Support Centers have provided numerous influential products to its internal Agency clients and to those at the State level (through the EPA Regions). These products include, but are not limited to the following: Annual TSC reports from the three Centers, a hard-rock mining conference every other year, PRO-UCL software development for site characterization statistics, groundwater modeling using state-of-the-art modeling software, numerical mo

CISNET: Model Documentation

Cancer.gov

The Publications pages provide lists of all CISNET publications since the inception of CISNET. Publications are listed by Cancer Site or by Research Topic. The Publication Support and Modeling Resources pages provides access to technical modeling information, raw data, and publication extensions stemming from the work of the CISNET consortium.

Geochemistry and origin of regional dolomites. Technical progress report, July 26, 1991--April 21, 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanson, G.N.; Meyers, W.J.

1992-07-01

This grant supports research on the origins and geochemical aspects of regional dolomites. Eight graduate students are involved in research on dolomite allowing a diverse range of studies. This report outlines their work in the field. (JL)

Fact Sheet: Environmental Characteristics of EPA, NRC, and DOE Sites Contaminated with Radioactive Substances

EPA Pesticide Factsheets

This fact sheet summarizes the findings of a report by a joint Interagency Environmental Pathway Modeling Working Group. It was designed to be used by technical staff responsible for implementing flow and transport models to support cleanup decisions.

Togetherware: Tools for Teamwork

ERIC Educational Resources Information Center

Raths, David

2013-01-01

More than ever, faculty and students are working jointly on documents sharing screens in class, swapping course materials and taking their collective pulse through polls. Nevertheless, many faculty members complain that technical support for group projects is lagging on campus, leaving them searching for solutions elsewhere. While some faculty…

CISNET: Resources

Cancer.gov

The Publications pages provide lists of all CISNET publications since the inception of CISNET. Publications are listed by Cancer Site or by Research Topic. The Publication Support and Modeling Resources pages provides access to technical modeling information, raw data, and publication extensions stemming from the work of the CISNET consortium.

Evaluation of STOL navigation avionics

NASA Technical Reports Server (NTRS)

Dunn, W. R., Jr.

1977-01-01

Research projects, including work on a vector magnetometer for aircraft attitude measurement, are summarized. The earth's electric field phenomena was investigated in its application to aircraft control and navigation. Research on electronic aircraft cabin noise suppression is reviewed and strapdown inertial reference unit technical support is outlined.

Some possibilities of a closure degree increase and matter turnover intensification in the bioregenerative life support system BIOS-3

NASA Astrophysics Data System (ADS)

Tikhomirov, A. A.; Ushakova, S. A.; Velichko, V. V.; Degermendzhy, Á. G.; Lasseur, Ch.; Lamaze, B.

The problems of scientific-technical substantiation of perspective joint IBP-ESA works on imitation of functioning of stationary bioregenerative life support systems BLSS on Moon and or Mars are discussed With this purpose the possibilities of matter turnover intensification and closure degree increase which can be achieved after modernization of the BIOS-3 BLSS designed and constructed at Institute of Biophysics Siberian Branch of Russian Academy of Sciences IBP SB RAS Russia are considered These works are performed in the frame of INTAS IA project under the joint SB RAS-ESA financial support Specifically at the expense of intensity increase of photosynthetic active radiation from 150 to 250 Wt m 2 the productivity of photosynthesizing unit on oxygen and biomass is supposed to increase on 50 on average The given substantiation is based upon analysis of carried out preliminary experiments in a laboratory environment and in the BIOS-3 facility and also on series of experiments carried out at present time The results of technical reconstruction of lighting and thermoregulation systems demonstrating practical possibility of these plans implementation are produced On the grounds of mass exchange processes intensification the problems of a crew supply with vegetarian food and oxygen under a smaller photosynthesizing unit size are considered Some possibilities of the humans wastes utilization under combination of physicochemical and biological methods and necessary technical decisions allowing closure increase of matter turnover are

ORD Scientific and Engineering Technical Support for RPMs – Ground Water Technical Support Center

EPA Science Inventory

ORD Scientific and Engineering Technical Support for RPMs (and Others) is a hybrid informational and panel session that focuses on the technical support available from EPA’s Office of Research and Development (ORD) to RPMs and other EPA cleanup program staff. Examples of technica...

The Center for Space Telemetering and Telecommunications Systems

NASA Technical Reports Server (NTRS)

Horan, S.; DeLeon, P.; Borah, D.; Lyman, R.

2003-01-01

This report comprises the final technical report for the research grant 'Center for Space Telemetering and Telecommunications Systems' sponsored by the National Aeronautics and Space Administration's Goddard Space Flight Center. The grant activities are broken down into the following technology areas: (1) Space Protocol Testing; (2) Autonomous Reconfiguration of Ground Station Receivers; (3) Satellite Cluster Communications; and (4) Bandwidth Efficient Modulation. The grant activity produced a number of technical reports and papers that were communicated to NASA as they were generated. This final report contains the final summary papers or final technical report conclusions for each of the project areas. Additionally, the grant supported students who made progress towards their degrees while working on the research.

Zero-gravity atmospheric Cloud Physics Experiment Laboratory; Programmatics report

NASA Technical Reports Server (NTRS)

1974-01-01

The programmatics effort included comprehensive analyses in four major areas: (1) work breakdown structure, (2) schedules, (3) costs, and (4) supporting research and technology. These analyses are discussed in detail in the following sections which identify and define the laboratory project development schedule, cost estimates, funding distributions and supporting research and technology requirements. All programmatics analyses are correlated among themselves and with the technical analyses by means of the work breakdown structure which serves as a common framework for program definition. In addition, the programmatic analyses reflect the results of analyses and plans for reliability, safety, test, and maintenance and refurbishment.

Obtaining Technical Support for Superfund, RCRA and Brownfields Site Issues Fact Sheet

EPA Pesticide Factsheets

EPA’s Technical Support Centers (TSCs) and other technical support services are available to Regional RemedialProject Managers, Corrective Action Staff, and On-Scene Coordinators needing specialized technical expertisefor specific tasks or projects.

Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project) Quality Assurance Management Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fix, N. J.

The scope of the Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project) is to provide technical and integration support to Fluor Hanford, Inc., including operable unit investigations at 300-FF-5 and other groundwater operable units, strategic integration, technical integration and assessments, remediation decision support, and science and technology. This Quality Assurance Management Plan provides the quality assurance requirements and processes that will be followed by the Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project).

78 FR 70586 - Technical Support Document: Technical Update of the Social Cost of Carbon for Regulatory Impact...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-26

... OFFICE OF MANAGEMENT AND BUDGET Technical Support Document: Technical Update of the Social Cost of... Budget, Executive Office of the President. ACTION: Notice of availability and request for comments. SUMMARY: The Office of Management and Budget (OMB) requests comments on the Technical Support Document...

Standardization: Hardware and Software Standardization Can Reduce Costs and Save Time

ERIC Educational Resources Information Center

Brooks-Young, Susan

2005-01-01

Sadly, technical support doesn't come cheap. One money-saving strategy that's gained popularity among school technicians is equipment and software standardization. When it works, standardization can be very effective. However, standardization has its drawbacks. This article discusses the advantages and disadvantages of standardization.

Family Support Systems: Alternative Child Care Arrangements.

ERIC Educational Resources Information Center

Winthrop Coll., Rock Hill, SC. School of Consumer Science and Allied Professions.

Winthrop College, a resource center for information on employer-sponsored child care, conducted an Appalachian Regional Commission project designed to assess the feasibility of employer-sponsored child care, gather technical information about current models, determine child care needs of working women in South Carolina, and encourage employers to…

Technical support for geopressured-geothermal activities in Louisiana. Final geological report, 1 November 1981-31 October 1982

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pilger, R.H.

1984-06-25

This report contains the component Site-Specific Studies-Geophysics, Diagenesis, Geochemistry. Work for Site-Specific Studies is finished, and the results presented in this report are final. Individual studies have been entered separately into the data base. (ACR)

Collaboration Nation: The Building of the Welsh Repository Network

ERIC Educational Resources Information Center

Knowles, Jacqueline

2010-01-01

Purpose: The purpose of this paper is to disseminate information about the Welsh Repository Network (WRN), innovative work being undertaken to build an integrated network of institutional digital repositories. A collaborative approach, in particular through the provision of centralised technical and organisational support, has demonstrated…

Technology Facilitation in the Rural School: An Analysis of Options.

ERIC Educational Resources Information Center

Hawkes, Mark; Halverson, Pamela; Brockmueller, Bradley

2002-01-01

A study examining technology support in rural schools surveyed 129 school technology coordinators in four upper plains states. Heavy pedagogical and technical demands were placed on rural technology coordinators. Rural technology coordinators should have teaching experience and advanced degree work in network administration, computer hardware…

Anatomy of an Evidence Base

ERIC Educational Resources Information Center

Malouf, David B.; Taymans, Juliana M.

2016-01-01

An analysis was conducted of the What Works Clearinghouse (WWC) research evidence base on the effectiveness of replicable education interventions. Most interventions were found to have little or no support from technically adequate research studies, and intervention effect sizes were of questionable magnitude to meet education policy goals. These…

Space station program phase B definition: Nuclear reactor-powered space station cost and schedules

NASA Technical Reports Server (NTRS)

1971-01-01

Tabulated data are presented on the costs, schedules, and technical characteristics for the space station phases C and D program. The work breakdown structure, schedule data, program ground rules, program costs, cost-estimating rationale, funding schedules, and supporting data are included.

Maintenance Performance System. Guide for Individual Technical Training in Direct Support Units. Volume 1. Training Methodology

DTIC Science & Technology

1984-01-01

903-78-C-2007 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK AREA & WORK UNIT NUMBERS Anacapa Sciences, Inc...of training responsibilities, and the most difficult job to perform . He is responsible for the work his section performs , as well as for training his...tasks. Relate these tasks to work done in your shop. Determine which tasks are performed frequently, rarely, and never. As you perform this review, make a

Completion of Launch Director Console Project and Other Support Work

NASA Technical Reports Server (NTRS)

Steinrock, Joshua G.

2018-01-01

There were four projects that I was a part of working on during the spring semester of 2018. This included the completion of the Launch Director Console (LDC) project and the completion and submission of a Concept of Operations (ConOps) document for the Record and Playback System (RPS) at the Launch Control Center (LCC), as well as supporting the implementation of a unit in RPS known as the CDP (Communication Data Processor). Also included was my support and mentorship of a High School robotics team that is sponsored by Kennedy Space Center. The LDC project is an innovative workstation to be used by the launch director for the future Space Launch System program. I worked on the fabrication and assembly of the final console. The ConOps on RPS is a technical document for which I produced supporting information and notes. All of this was done in the support of the IT Project Management Office (IT-F). The CDP is a subsystem that will eventually be installed in and operated by RPS.

Flight-vehicle structures education in the US: Assessment and recommendations

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.

1987-01-01

An assessment is made of the technical contents of flight-vehicle structures curricula at 41 U.S. universities with accredited aerospace engineering programs. The assessment is based on the technical needs for new and projected aeronautical and space systems as well as on the likely characteristics of the aerospace engineering work environment. A number of deficiencies and areas of concern are identified and recommendations are presented for enhancing the effectiveness of flight-vehicle structures education. A number of government supported programs that can help aerospace engineering education are listed in the appendix.

Study of the Physics of Insulating Films as Related to the Reliability of Metal-Oxide Semiconductor Devices

DTIC Science & Technology

1980-05-01

York 10598 Technical assistance of F.L. Pesavento and J.A. Calse Typed by Steila B. Havreluk (3277) Abstract: Chemically vapor deposited (CVD) Si rich...wish to acknowledge the critical reading of this manuscript by D.R. Young and M.I. Nathan; the technical assistance of F.L. Pesavento and L.A. Calise...rendered by J.A. Calise and F.L. Pesavento . Samples have been prepared by the I.B.M. Yorktown Si Process Facility and the work has been supported in part

Customisation of an instrument to assess anaesthesiologists' non-technical skills.

PubMed

Jepsen, Rikke M H G; Spanager, Lene; Lyk-Jensen, Helle T; Dieckmann, Peter; Østergaard, Doris

2015-02-22

The objectives of the study were to identify Danish anaesthesiologists' non-technical skills and to customise the Scottish-developed Anaesthetists' Non-Technical Skills instrument for Danish anaesthesiologists. Six semi-structured group interviews were conducted with 31 operating room team members: anaes-thesiologists, nurse anaesthetists, surgeons, and scrub nurses. Interviews were transcribed verbatim and analysed using directed content analysis. Anaesthesiologists' non-technical skills were identified, coded, and sorted using the original instrument as a basis. The resulting prototype instrument was discussed with anaesthesiologists from 17 centres to ensure face validity. Interviews lasted 46-67 minutes. Identified examples of anaesthesiologists' good or poor non-technical skills fit the four categories in the original instrument: situation awareness; decision making; team working; and task management. Anaesthesiologists' leadership role in the operating room was emphasised: the original 'Task Management' category was named 'Leadership'. One new element, 'Demonstrating self-awareness' was added under the category 'Situation Awareness'. Compared with the original instrument, half of the behavioural markers were new, which reflected that being aware of and communicating one's own abilities to the team; working systematically; and speaking up to avoid adverse events were important skills. The Anaesthetists' Non-Technical Skills instrument was customised to a Danish setting using the identified non-technical skills for anaesthesiologists and the original instrument as basis. The customised instrument comprises four categories and 16 underpinning elements supported by multiple behavioural markers. Identifying non-technical skills through semi-structured group interviews and analysing them using direct content analysis proved a useful method for customising an assessment instrument to another setting.

Evaluation of partnership working in cities in phase IV of the WHO Healthy Cities Network.

PubMed

Lipp, Alistair; Winters, Tim; de Leeuw, Evelyne

2013-10-01

An intersectoral partnership for health improvement is a requirement of the WHO European Healthy Cities Network of municipalities. A review was undertaken in 59 cities based on responses to a structured questionnaire covering phase IV of the network (2003-2008). Cities usually combined formal and informal working partnerships in a pattern seen in previous phases. However, these encompassed more sectors than previously and achieved greater degrees of collaborative planning and implementation. Additional WHO technical support and networking in phase IV significantly enhanced collaboration with the urban planning sector. Critical success factors were high-level political commitment and a well-organized Healthy City office. Partnerships remain a successful component of Healthy City working. The core principles, purpose and intellectual rationale for intersectoral partnerships remain valid and fit for purpose. This applied to long-established phase III cities as well as newcomers to phase IV. The network, and in particular the WHO brand, is well regarded and encourages political and organizational engagement and is a source of support and technical expertise. A key challenge is to apply a more rigorous analytical framework and theory-informed approach to reviewing partnership and collaboration parameters.

Improving technical information use: what can be learnt from a manager's perspective?

PubMed

Jacobson, C; Lisle, A; Carter, R W; Hockings, M T

2013-07-01

Conservation practice reportedly suffers from low use of technical information. Understanding of factors that affect the influence of technical information on management decision-making is limited. We sought to identify leverage points for improved technical information dissemination in the New South Wales Parks and Wildlife Service, Australia, given the significant recent investments in monitoring and evaluation that had been made. We did so by exploring the inter-relationships between factors affecting the influence of different information types on management decisions. Results indicate that managers have a high inclination toward adaptive behavior, given they operate in an information poor environment. The most influential types of information were those that enabled interaction between information provider and recipient (e.g., staff experience and expertise). An analysis of the concordance in individuals' responses for different information types showed that neither accessibility nor organizational expectation of use was aligned with influence on decision-making. Alignment of responses also varied by work area. Raising expectations of information use or increasing access to particular types of information is therefore unlikely to result in an increase in influence on management decision-making. Rather than focussing on matching accessibility and expected use of particular information types, our results indicate that technical information uptake is best supported through existing peer networks tailored to specific work areas.

S&MA Internship to Support Orion and the European Service Module

NASA Technical Reports Server (NTRS)

Hutcheson, Connor

2016-01-01

As a University Space Research Association (USRA) intern for NASA Johnson Space Center (JSC) during the summer 2016 work term, I worked on three main projects for the Space Exploration Division (NC) of the Safety and Mission Assurance (S&MA) Directorate. I worked on all three projects concurrently. One of the projects involved facilitating the status and closure of technical actions that were created during European Service Module (ESM) safety reviews by the MPCV Safety & Engineering Review Panel (MSERP). The two main duties included accurately collecting and summarizing qualitative data, and communicating that information to the European Space Agency (ESA) and Airbus (ESA's prime contractor) in a clear, succinct and precise manner. This project also required that I create a report on the challenges and opportunities of international S&MA. With its heavy emphasis on soft skills, this project taught me how to communicate better, by showing me how to present and share information in an easy-to-read and understandable format, and by showing me how to cooperate with and culturally respect international partners on a technical project. The second project involved working with the Orion Thermal Protection System (TPS) Process Failure Modes and Effects Analysis (PFMEA) Working Group to create the first full version of the Orion TPS PFMEA. The Orion TPS PFMEA Working Group met twice a week to analyze the Avcoat block installation process for failure modes, the failure modes effects, and how such failure modes could be controlled. I was in charge of implementing changes that were discussed in meeting, but were not implemented real time. Another major task included creating a significant portion of the content alongside another team member outside the two weekly meetings. This project caused me to become knowledgeable about TPS, heatshields, space-rated manufacturing, and non-destructive evaluation (NDE). The project also helped me to become better at working with a small team and helped improved my technical communication skills. My main duty for the third project was creating a Safety Verification Tracking Log (SVTL) for the Orbital Maneuvering System Engine (OMS-E), and contacting subject matter experts to close Hazard Report (HR) control verifications. This project also required me to support other OMS-E safety process tasks, like monitoring OMS-E vibration testing for Quality Assurance (QA) purposes. This project helped me become even more proficient in Excel. Throughout the project, I gained knowledge about the OMS-E system and improved my understanding of pressure systems and propellant systems. In terms of education goals, this work term has affirmed my desire to take a few more space-related courses, like orbital mechanics, so that I can have a better understanding of human spaceflight and the industry surrounding it. However, the work term did not persuade me to pursue a master's degree. In terms of career goals, this work term has helped me clarify the direction I would like to head in the future. The perspective of three summer terms working for NASA in S&MA has allowed me to observe that most S&MA employees joined S&MA after working in other NASA directorates, such as Engineering or Flight Operations. It is my belief that it would be advantageous for both NASA and I for me to broaden my knowledge base and technical skill set by completing hands-on technical work on human spaceflight projects, and for me to integrate my safety experience directly into technical work in other directorates. The other significant advantage to this proposed situation is that if I were to eventually return to S&MA, I would be returning with a substantial set of hands-on technical experience and knowledge, which would be a significant resource for S&MA tasks and projects.

Company Training. A Key Strategy for Success. Workforce Brief #2.

ERIC Educational Resources Information Center

Bergman, Terri

General research and anecdotal reports have confirmed that both technical and basic skills training offer many benefits to companies of all sizes. Company training can improve employee performance, firm productivity, product quality, and company profitability. Training supports "high-performance" work practices such as the following: total quality…

Science to Support Informed Decision-Making: Examples from the US Environmental Protection Agency

EPA Science Inventory

The mission of the United States Environmental Protection Agency (US EPA) is to protect human health and the environment. We work to achieve our mission through a combination of applied research and technical guidance for localities, states, tribes, and regions to best manage the...

Common Ada Programming Support Environment (APSE) Interface Set (CAIS) Implementation Validation Capability (CIVC2)

DTIC Science & Technology

1992-06-01

Paper, Version 2.0, December 1989. [Woodcock90] Gary Woodcock , Automated Generation of Hypertext Documents, CIVC Technical Report (working paper...environment setup, performance testing, assessor testing, and analysis) of the ACEC. A captive scenario example could be developed that would guide the

Programs That Work

ERIC Educational Resources Information Center

Hyslop, Alisha; Hemmelman, Chris

2012-01-01

According to the National Research Center for Career and Technical Education, a "promising practice is any technique used that has a positive impact on students and has some data to support the claims made." Sources of this data range from experimental research to district- or state-level data analysis, but they must provide…

Applied Science and Research Applications: Recent Research Reports.

ERIC Educational Resources Information Center

National Science Foundation, Washington, DC. Directorate for Applied Science and Research Applications.

This report contains abstracts of new technical reports and other documents resulting from research supported by the directorate for Applied Science and Research Applications of the National Science Foundation. Research reports from current programs include work in the areas of public policy and regulation; public service delivery and urban…

An Integrated Strategy for an Apparel Design Curriculum

ERIC Educational Resources Information Center

Bye, Elizabeth; Labat, Karen L.

2005-01-01

The core of apparel design education is the studio experience. This article discusses an Integrated Apparel Design Curriculum model built on a foundation of creative and technical experimentation and learning which contributes to developing abstract thinking skills. Various learning styles are supported as students work through the design process…

NREL: International Activities - Global Partnerships

Science.gov Websites

specific examples of technical assistance provided by NREL, see entries on the Bilateral Partnerships page Integration Study NREL is supporting collaborative work across the governments of Canada, Mexico, and the conducting a regional grid integration study for South Asian countries. UN Environment NREL partners with UN

Computer Assisted Instructional Design for Computer-Based Instruction. Final Report. Working Papers.

ERIC Educational Resources Information Center

Russell, Daniel M.; Pirolli, Peter

Recent advances in artificial intelligence and the cognitive sciences have made it possible to develop successful intelligent computer-aided instructional systems for technical and scientific training. In addition, computer-aided design (CAD) environments that support the rapid development of such computer-based instruction have also been recently…

Human Intergroup Relations. Certification Requirement #69.

ERIC Educational Resources Information Center

Northcentral Technical Coll., Wausau, WI.

This document provides materials for a course in human intergroup relations for preservice or inservice teachers preparing to work with a diverse, disadvantaged group of students. The information in the guide is drawn from the faculty and student support staff of Northcentral Technical College (NTC) in Wausau, Wisconsin, which serves a variety of…

Correlating electronic and vibrational motions in charge transfer systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khalil, Munira

2014-06-27

The goal of this research program was to measure coupled electronic and nuclear motions during photoinduced charge transfer processes in transition metal complexes by developing and using novel femtosecond spectroscopies. The scientific highlights and the resulting scientific publications from the DOE supported work are outlined in the technical report.

Summary of Environmental Data Analysis and Work Performed by Lawrence Livermore National Laboratory (LLNL) in Support of the Navajo Nation Abandoned Mine Lands Project at Tse Tah, Arizona

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taffet, Michael J.; Esser, Bradley K.; Madrid, Victor M.

This report summarizes work performed by Lawrence Livermore National Laboratory (LLNL) under Navajo Nation Services Contract CO9729 in support of the Navajo Abandoned Mine Lands Reclamation Program (NAMLRP). Due to restrictions on access to uranium mine waste sites at Tse Tah, Arizona that developed during the term of the contract, not all of the work scope could be performed. LLNL was able to interpret environmental monitoring data provided by NAMLRP. Summaries of these data evaluation activities are provided in this report. Additionally, during the contract period, LLNL provided technical guidance, instructional meetings, and review of relevant work performed by NAMLRPmore » and its contractors that was not contained in the contract work scope.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kervin, Karina E.; Cook, Robert B.; Michener, William K.

Conventional wisdom makes the suggestion that there are benefits to the creation of shared repositories of scientific data. Funding agencies require that the data from sponsored projects be shared publicly, but individual researchers often see little personal benefit to offset the work of creating easily sharable data. These conflicting forces have led to the emergence of a new role to support researchers: data managers. This paper identifies key differences between the socio-technical context of data managers and other "human infrastructure" roles articulated previously in Computer Supported Cooperative Work (CSCW) literature and summarizes the challenges that data managers face when acceptingmore » data for archival and reuse. Finally, while data managers' work is critical for advancing science and science policy, their work is often invisible and under-appreciated since it takes place behind the scenes.« less

EPA Technical Support Centers (TSC): FY14 Lessons ...

EPA Pesticide Factsheets

EPA’s Technical Support Centers (TSC) included in ORD’s Safe and Healthy Communities (SHC) Research Action Plan fill the need for supplying subject-matter experts to continually assess state-of-the-art research and practices and channel this information to users in both direct applications (i.e., site-specific technical support) and general applications (i.e., technical transfer activities such as technical guidance documents, conferences, or workshops) . The TSCs are charged with providing solutions by: 1) linking EPA research to Agency decision-makers; 2) applying best practices to real world field applications; and 3) channeling feedback from field application to research communities. The TSP goal is to provide Regional Remedial Project Managers (RPMs), Corrective Action Staff, and On-Scene Coordinators (OSCs) with a diverse set of readily-accessible resources for technical assistance. This research summary provides six case studies – two from each of the three TSCs (Ground Water Technical Support Center, Engineering Technical Support Center, and Site Characterization Technical Support Center) – to exemplify and summarize the variety of TSC approaches that contribute to fulfilling the TSP mission. EPA’s Technical Support Centers (TSC) included in ORD’s Safe and Healthy Communities (SHC) Research Action Plan fill the need for supplying subject-matter experts to continually assess state-of-the-art research and practices and channel this informati

A Biomedical Assessment of a One-Atmosphere Diving System: JIM-4.

DTIC Science & Technology

1981-12-01

physiological adaptation is required, work methods are based on support vehicles , which can provide recompression chambers for divers after deep diving, and on...Charles Brooner HMI Steve Hall NMRI Charles Flynn Cliff Newell Operational and Technical Support NOAA ENCM( MDV ) William W. Winters MRCS( MDV ) Charles...Submergence Rescue Vehicle (DSRV), as shown in Fig. 26. It was assumed that in the event a submarine was incapacitated at great depths, a JIM

GELLO: an object-oriented query and expression language for clinical decision support.

PubMed

Sordo, Margarita; Ogunyemi, Omolola; Boxwala, Aziz A; Greenes, Robert A

2003-01-01

GELLO is a purpose-specific, object-oriented (OO) query and expression language. GELLO is the result of a concerted effort of the Decision Systems Group (DSG) working with the HL7 Clinical Decision Support Technical Committee (CDSTC) to provide the HL7 community with a common format for data encoding and manipulation. GELLO will soon be submitted for ballot to the HL7 CDSTC for consideration as a standard.

Evaluation of Expedient Surfaces for Remote Piloted Aircraft

DTIC Science & Technology

2017-12-01

as an official Department of the Army position unless so designated by other authorized documents. DESTROY THIS REPORT WHEN NO LONGER NEEDED. DO NOT...Technical oversight was provided by Mr. Jeb S. Tingle. The work was performed by the Airfields and Pavements Branch (GMA) of the Engineering Systems...needed to support expeditionary operations do not have to be as robust as systems designed to support manned aircraft, such as the AM2 matting

Southwest Energy Efficiency Project (SWEEP) Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Geller, Howard; Meyers, Jim

SWEEP worked with Energy Efficiency and Renewable Energy (EERE) programs to foster greater energy efficiency throughout the Southwest. SWEEP accomplished this through a combination of analysis and support; preparation and distribution of materials on best practice technologies, policies and programs; and technical assistance and information dissemination to states and municipalities in the southwest supporting BTO, AMO, OWIP for advancement of efficiency in products and practices. These efforts were accomplished during the period 2012 through 2017.

Design for effective development and prototyping of the HL-20

NASA Astrophysics Data System (ADS)

Urie, David M.; Floreck, Paul A.; McMorris, John A.; Elvin, John D.

1993-10-01

A feasibility study of the HL-20 personnel launch system (PLS) concept was conducted by a team which focused on creating a PLS design approach and an accelerated development plan consistent with the historical 'Skunk Works' approach to rapid prototyping. Technical design, manufacturing, system testing, and operations and support elements of the predefined baseline concept were evaluated. An initial phase program, featuring a concurrent system test during design and development, leading to the orbital flight of an unmanned HL-20 prototype on a Titan III launch system, was prescribed. A second-phase development and manufacturing plan leading to system operational status was also formulated. Baseline design feature modifications were made when necessary, without compromise to performance, to satisfy the prototype development plan. Technical design details and off-the-shelf hardware candidates were also identified for several subsystems, including the launch-system interface adapter/emergency escape system. The technical feasibility of the system and applicability of the Skunk Works approach to development of the HL-20/PLS were verified.

Application of nonlinear ultrasonics to inspection of stainless steel for dry storage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ulrich, Timothy James II; Anderson, Brain E.; Remillieux, Marcel C.

This report summarized technical work conducted by LANL staff an international collaborators in support of the UFD Storage Experimentation effort. The focus of the current technical work is on the detection and imaging of a failure mechanism known as stress corrosion cracking (SCC) in stainless steel using the nonlinear ultrasonic technique known as TREND. One of the difficulties faced in previous work is in finding samples that contain realistically sized SCC. This year such samples were obtained from EPRI. Reported here are measurements made on these samples. One of the key findings is the ability to detect subsurface changes tomore » the direction in which a crack is penetrating into the sample. This result follows from last year's report that demonstrated the ability of TREND techniques to image features below the sample surface. A new collaboration was established with AGH University of Science and Technology, Krakow, Poland.« less

Key performance indicators for Australian mental health court liaison services.

PubMed

Davidson, Fiona; Heffernan, Ed; Greenberg, David; Butler, Tony; Burgess, Philip

2017-12-01

The aim of this paper is to describe the development and technical specifications of a framework and national key performance indicators (KPIs) for Australian mental health Court Liaison Services (CLSs) by the National Mental Health Court Liaison Performance Working Group (Working Group). Representatives from each Australian State and Territory were invited to form a Working Group. Through a series of national workshops and meetings, a framework and set of performance indicators were developed using a review of literature and expert opinion. A total of six KPIs for CLSs have been identified and a set of technical specifications have been formed. This paper describes the process and outcomes of a national collaboration to develop a framework and KPIs. The measures have been developed to support future benchmarking activities and to assist services to identify best practice in this area of mental health service delivery.

The evaluator as technical assistant: A model for systemic reform support

NASA Astrophysics Data System (ADS)

Century, Jeanne Rose

This study explored evaluation of systemic reform. Specifically, it focused on the evaluation of a systemic effort to improve K-8 science, mathematics and technology education. The evaluation was of particular interest because it used both technical assistance and evaluation strategies. Through studying the combination of these roles, this investigation set out to increase understanding of potentially new evaluator roles, distinguish important characteristics of the evaluator/project participant relationship, and identify how these roles and characteristics contribute to effective evaluation of systemic science education reform. This qualitative study used interview, document analysis, and participant observation as methods of data collection. Interviews were conducted with project leaders, project participants, and evaluators and focused on the evaluation strategies and process, the use of the evaluation, and technical assistance. Documents analyzed included transcripts of evaluation team meetings and reports, memoranda and other print materials generated by the project leaders and the evaluators. Data analysis consisted of analytic and interpretive procedures consistent with the qualitative data collected and entailed a combined process of coding transcripts of interviews and meetings, field notes, and other documents; analyzing and organizing findings; writing of reflective and analytic memos; and designing and diagramming conceptual relationships. The data analysis resulted in the development of the Multi-Function Model for Systemic Reform Support. This model organizes systemic reform support into three functions: evaluation, technical assistance, and a third, named here as "systemic perspective." These functions work together to support the project's educational goals as well as a larger goal--building capacity in project participants. This model can now serve as an informed starting point or "blueprint" for strategically supporting systemic reform.

Reader-Centered Technical Writing

NASA Astrophysics Data System (ADS)

Narayanan, M.

2012-12-01

Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into an old schema. This reinforces basic engineering and mathematical design concepts. Accommodation: Here, it may work in a different manner. Writers may have to accommodate an old schema to a new object. This helps engineers to focus more on applications. Adaptation: Assimilation and accommodation are the two sides of adaptation, Jean Piaget's term for what most of us would call learning. Mathematical design concepts generated by students should be suitable for creative engineering applications. References : Phillips, D. C. and Soltis, Jonas F. (2003) "Piagetian Structures and Psychological Constructivism," in Perspectives on Learning (4th edition). New York: Teachers College Press. Salvo, Michael J. (2001). Ethics of Engagement: User-Centered Design and Rhetorical Methodology. Technical Communication Quarterly Volume 10, Issue 3, 2001. pages 273-290. http://www.ship.edu/~cgboeree/piaget.html http://owl.english.purdue.edu/owl/resource/624/01/

Environmental Science and Research Foundation, Inc. annual technical report: Calendar year 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reynolds, R.D.; Warren, R.W.

This Annual Technical Report describes work conducted for the Department of Energy, Idaho Operations Office (DOE-ID), by the Environmental Science and Research Foundation (Foundation). The Foundation`s mission to DOE-ID provides support in several key areas. The Foundation conducts an environmental monitoring and surveillance program over an area covering much of the upper Snake River Plain, and provides environmental education and support services related to Idaho National Engineering and Environmental Laboratory (INEEL) natural resource issues. Also, the Foundation, with its University Affiliates, conducts ecological and radioecological research on the Idaho National Environmental Research Park. This research benefits major DOE-ID programs includingmore » Waste Management, Environmental Restoration, Spent Nuclear Fuels, and Land Management Issues. Summaries are included of the individual research projects.« less

The Accreditation Experience of Clinical Laboratories and Blood Banks in Mexico.

PubMed

Quintana, Sandra

2015-11-01

The accreditation of clinical laboratories and blood banks based on ISO 15189 is now being consolidated in Mexico, and is coordinated by the Mexican accreditation entity innovative strategies, A.C. (ema) and supported by the activities of the committee of clinical laboratories and blood banks. The active participation in working groups formed by the technical committee of clinical laboratories and blood banks in specific areas, has contributed to the formulation of technical documents and criteria of evaluation that strengthen the current accreditation scheme. The national registry of evaluation (PNE) consists of technical experts and evaluators from different disciplines of clinical laboratory; the evaluators actively participate in accreditation assessment, with an ultimate goal to receive training and feedback for continuous improvement of its own performance.

ISDP salt batch #2 supernate qualification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, T. B.; Nash, C. A.; Fink, S. D.

2009-01-05

This report covers the laboratory testing and analyses of the second Integrated Salt Disposition Project (ISDP) salt supernate samples, performed in support of initial radioactive operations of Actinide Removal Process (ARP) and Modular Caustic-Side Solvent Extraction Unit (MCU). Major goals of this work include characterizing Tank 22H supernate, characterizing Tank 41H supernate, verifying actinide and strontium adsorption with a standard laboratory-scale test using monosodium titanate (MST) and filtration, and checking cesium mass transfer behavior for the MCU solvent performance when contacted with the liquid produced from MST contact. This study also includes characterization of a post-blend Tank 49H sample asmore » part of the Nuclear Criticality Safety Evaluation (NCSE). This work was specified by Task Technical Request and by Task Technical and Quality Assurance Plan (TTQAP). In addition, a sampling plan will be written to guide analytical future work. Safety and environmental aspects of the work were documented in a Hazard Assessment Package.« less

International forensic automotive paint database

NASA Astrophysics Data System (ADS)

Bishea, Gregory A.; Buckle, Joe L.; Ryland, Scott G.

1999-02-01

The Technical Working Group for Materials Analysis (TWGMAT) is supporting an international forensic automotive paint database. The Federal Bureau of Investigation and the Royal Canadian Mounted Police (RCMP) are collaborating on this effort through TWGMAT. This paper outlines the support and further development of the RCMP's Automotive Paint Database, `Paint Data Query'. This cooperative agreement augments and supports a current, validated, searchable, automotive paint database that is used to identify make(s), model(s), and year(s) of questioned paint samples in hit-and-run fatalities and other associated investigations involving automotive paint.

Sandia National Laboratories support of the Iraq Nuclear Facility Dismantlement and Disposal Program.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cochran, John Russell; Danneels, Jeffrey John

2009-03-01

Because of past military operations, lack of upkeep and looting there are now enormous radioactive waste problems in Iraq. These waste problems include destroyed nuclear facilities, uncharacterized radioactive wastes, liquid radioactive waste in underground tanks, wastes related to the production of yellow cake, sealed radioactive sources, activated metals and contaminated metals that must be constantly guarded. Iraq currently lacks the trained personnel, regulatory and physical infrastructure to safely and securely manage these facilities and wastes. In 2005 the International Atomic Energy Agency (IAEA) agreed to organize an international cooperative program to assist Iraq with these issues. Soon after, the Iraqmore » Nuclear Facility Dismantlement and Disposal Program (the NDs Program) was initiated by the U.S. Department of State (DOS) to support the IAEA and assist the Government of Iraq (GOI) in eliminating the threats from poorly controlled radioactive materials. The Iraq NDs Program is providing support for the IAEA plus training, consultation and limited equipment to the GOI. The GOI owns the problems and will be responsible for implementation of the Iraq NDs Program. Sandia National Laboratories (Sandia) is a part of the DOS's team implementing the Iraq NDs Program. This report documents Sandia's support of the Iraq NDs Program, which has developed into three principal work streams: (1) training and technical consultation; (2) introducing Iraqis to modern decommissioning and waste management practices; and (3) supporting the IAEA, as they assist the GOI. Examples of each of these work streams include: (1) presentation of a three-day training workshop on 'Practical Concepts for Safe Disposal of Low-Level Radioactive Waste in Arid Settings;' (2) leading GOI representatives on a tour of two operating low level radioactive waste disposal facilities in the U.S.; and (3) supporting the IAEA's Technical Meeting with the GOI from April 21-25, 2008. As noted in the report, there was significant teaming between the various participants to best help the GOI. On-the-ground progress is the focus of the Iraq NDs Program and much of the work is a transfer of technical and practical skills and knowledge that Sandia uses day-to-day. On-the-ground progress was achieved in July of 2008 when the GOI began the physical cleanup and dismantlement of the Active Metallurgical Testing Laboratory (LAMA) facility at Al Tuwaitha, near Baghdad.« less

Working with Consortia - Advanced Packaging Reliability

NASA Technical Reports Server (NTRS)

Blanche, Jim; Strickland, Mark

2010-01-01

Description: Support the responsible NASA official for lead-free solder evaluation. Serve as the NASA technical liaison to the NASA/DoD Pb-free Project. Assure NASA areas of interest are included in JG-PP follow-on work. Support NASA/DoD telcons and face-to-face meetings. Update MSFC lead-free solder lessons learned report. FY10 plans: - Reliability data on lead-free solder applications for various part lead finishes and board finishes. - Update lead-free solder risks and risk mitigation strategies for NASA. - Evaluate lead-free alloy/lead-free finish reliability in design application. - Status CAVE project on Pb-free solder aging effects. - Compile the LTESE flight and bench data.

OAST Space Theme Workshop. Volume 1: Summary report. 1: Introduction. 2: General observations and some key findings. 3: Follow-on activity. Quick-look comments and working papers

NASA Technical Reports Server (NTRS)

1976-01-01

The Outlook for Space Study, consideration of National needs and OAST technology goals were factors in the selection of the following themes for candidate technical initiative and supporting program plans: space power station; search for extraterrestrial life; industrialization of space; global service station; exploration of the solar system; and advanced space transportation system. An overview is presented of the Space Theme Workshop activities in developing technology needs, program requirements, and proposed plans in support of each theme. The unedited working papers used by team members are included.

Support of NASA quality requirements by defense contract administration services regions

NASA Technical Reports Server (NTRS)

Farrar, Hiram D.

1966-01-01

Defense Contract Administration Services Regions (DCASR) quality assurance personnel performing under NASA Letters of Delegation must work closely with the assigned technical representative of the NASA centers. It is realized that technical personnel from the NASA Centers cannot make on-site visits as frequently as they would like to. However, DCASR quality assurance personnel would know the assigned NASA technical representative and should contact him when problems arise. The technical representative is the expert on the hardware and should be consulted on any problem area. It is important that the DCASR quality assurance personnel recommend to the delegating NASA Center any new or improved methods of which they may be aware which would assist in achieving the desired quality and reliability in NASA hardware. NASA expects assignment of competent personnel in the Quality Assurance functional area and is not only buying the individual's technical skill, but also his experience. Suggestions by field personnel can many times up-grade the quality or the hardware.

Smoothing the way to opportunity in Peru.

PubMed

Valdivia, B

1999-11-01

Since 1990, poor women in Peru have suffered from the impact of structural adjustment policies, which have lead to low wages, poor working conditions, and a general deterioration in the status of women workers. To address these problems, the Asociacion Aurora Vivar began its Alternative Technical Training Program for Women in July 1992, with the aim of increasing the entrepreneurial skills of women. The project aimed to support women who have problems at work, those who are unemployed and those with low income. Moreover, the project sought to increase women's participation in nontraditional areas of work. Training focused on increasing women's technical skills, including the repair of home appliances, and on personal development, such as leadership skills, confidence building, and business management. The project attracted a diverse group of women who took part in the training for a variety of reasons. The women's new capacities and skills create a positive image for them within the household. Aurora Vivar acknowledges the importance of vocational education to increase women's opportunities to earn a living. The association is proposing reforms in the educational system to introduce courses on business management, credit, and other technical skills as part of the formal education system.

Do failures in non-technical skills contribute to fatal medical accidents in Japan? A review of the 2010–2013 national accident reports

PubMed Central

Uramatsu, Masashi; Fujisawa, Yoshikazu; Mizuno, Shinya; Souma, Takahiro; Komatsubara, Akinori; Miki, Tamotsu

2017-01-01

Objectives We sought to clarify how large a proportion of fatal medical accidents can be considered to be caused by poor non-technical skills, and to support development of a policy to reduce number of such accidents by making recommendations about possible training requirements. Design Summaries of reports of fatal medical accidents, published by the Japan Medical Safety Research Organization, were reviewed individually. Three experienced clinicians and one patient safety expert conducted the reviews to determine the cause of death. Views of the patient safety expert were given additional weight in the overall determination. Setting A total of 73 summary reports of fatal medical accidents were reviewed. These reports had been submitted by healthcare organisations across Japan to the Japan Medical Safety Research Organization between April 2010 and March 2013. Primary and secondary outcome measures The cause of death in fatal medical accidents, categorised into technical skills, non-technical skills and inevitable progress of disease were evaluated. Non-technical skills were further subdivided into situation awareness, decision making, communication, team working, leadership, managing stress and coping with fatigue. Results Overall, the cause of death was identified as non-technical skills in 34 cases (46.6%), disease progression in 33 cases (45.2%) and technical skills in two cases (5.5%). In two cases, no consensual determination could be achieved. Further categorisation of cases of non-technical skills were identified as 14 cases (41.2%) of problems with situation awareness, eight (23.5%) with team working and three (8.8%) with decision making. These three subcategories, or combinations of them, were identified as the cause of death in 33 cases (97.1%). Conclusions Poor non-technical skills were considered to be a significant cause of adverse events in nearly half of the fatal medical accidents examined. Improving non-technical skills may be effective for reducing accidents, and training in particular subcategories of non-technical skills may be especially relevant. PMID:28209605

Technical Support Documents Used to Develop the Chesapeake Bay TMDL

EPA Pesticide Factsheets

The Chesapeake Bay TMDL development was supported by several technical documents for water quality standards and allocation methodologies specific to the Chesapeake Bay. This page provides the technical support documents.

SUPERFUND TECHNICAL SUPPORT

EPA Science Inventory

Under this task, technical support is provided to Regional Remedial Project Managers (RPMs)/On-Scene Coordinators (OSCs) at Superfund, RCRA, and Brownfields sites contaminated with hazardous materials by the Technical Support Center (TSC) for Monitoring and Site Characterization....

Providing Services to Virtual Patrons.

ERIC Educational Resources Information Center

Hulshof, Robert

1999-01-01

Discusses the types of services libraries need to support patrons who access the library via the Internet or e-mail. Highlights include issues in technical support; establishing policies and procedures; tools for technical support, including hardware and software; impacts of technical support on staff; and future possibilities. (LRW)

Management assessment of tank waste remediation system contractor readiness to proceed with phase 1B privatization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Certa, P.J.

1998-01-07

Readiness to Proceed With Phase 1B Privatization documents the processes used to determine readiness to proceed with tank waste treatment technologies from private industry, now known as TWRS privatization. An overall systems approach was applied to develop action plans to support the retrieval and disposal mission of the TWRS Project. The systems and infrastructure required to support the mission are known. Required systems are either in place or plans have been developed to ensure they exist when needed. Since October 1996 a robust system engineering approach to establishing integrated Technical Baselines, work breakdown structures, tank farms organizational structure and configurations,more » work scope, and costs has become part of the culture within the TWRS Project. An analysis of the programmatic, management, and technical activities necessary to declare readiness to proceed with execution of the mission demonstrates that the system, personnel, and hardware will be on line and ready to support the private contractors. The systems approach included defining the retrieval and disposal mission requirements and evaluating the readiness of the Project Hanford Management Contract (PHMC) team to support initiation of waste processing by the private contractors in June 2002 and to receive immobilized waste shortly thereafter. The Phase 1 feed delivery requirements from the private contractor Requests for Proposal were reviewed. Transfer piping routes were mapped, existing systems were evaluated, and upgrade requirements were defined.« less

[Medical support of Russian Armed Forces: the results and perspectives].

PubMed

Shappo, V V

2008-01-01

The results of work of the Russian Federation Armed Forces medical service obtained in 2007 were summarized and the main problems of its activities in the current year and the very near future were determined. So the work at defining medical support as a type of Army and Navy support was began. The most important task of medical service in 2008 is realization of the Armed Forces medical support conception and goal-oriented program "The improvement of Russian Federation Armed Forces medical support in 2008-2012", the formation of two-level system of personnel's medical support. During the task realization the medical units and institutions are reorganized into federal state institutions. The RF DM Main Military Medical Headquarters works at significant improvement of war and military service veterans' medical attendance. The departmental program "Development of material and technical basis of military medical institutions for 2001-2010" is successfully realized. The measures to optimize the assignment of graduates from military medical higher schools are carried out. The tasks to improve the research work were outlined. The new principles of organization of military medical service control and work will be based on centralization of planning and decentralization of decision implementation, the possibility of military medical units to carry it out taking into account the common intention, safe feedback in order to make the work of army and navy medical specialists more effective in any conditions.

What Schools Are Doing around Career Development: Implications for Policy and Practice

ERIC Educational Resources Information Center

Perry, Justin C.; Wallace, Eric W.

2012-01-01

This article describes the role that schools are playing in supporting career development for young people. It examines the history of career-related programming in schools, including school-to-work programs, career and technical education, the college and career readiness movement, and current school reform initiatives. This understanding of…

Support and Training of Environmental Lawyers

ERIC Educational Resources Information Center

Cameron, Roderick A.

1971-01-01

The need for scientists to work with public interest lawyers in the field of environmental and consumer law is assessed. Scientists must become involved in public issues, educating lawyers to the problems, technical difficulties, and policy goals. From the lawyer, the scientist learns what the legal framework is into which his goals and supportive…

Analysis of Security Contractors in Deployed Environments

DTIC Science & Technology

2006-12-01

35 2. Proper Training and Education .......................................................36 3. Improve Overall Contract Visibility...like to acknowledge the work of P. W. Singer , author of the book titled “Corporate Warriors,” whose dedicated research and thorough analysis on the...skills, including combat operations, strategic planning, intelligence, risk assessment, operational support, training , and technical skills.”3 CPFF

Competencies for Food Graduate Careers: Developing a Language Tool

ERIC Educational Resources Information Center

Weston, Emma; Crilly, Jim; Mossop, Liz; Foster, Tim

2017-01-01

Unlike many other graduate career pathways in the UK, the food industry does not have a cohesive competency framework to support employers, students and degree providers. Food sciences-based technical graduates are a significant proportion of the industry's graduate intake; this study aims to provide such a framework. Initial work involving a…

Electronic Resources and Mission Creep: Reorganizing the Library for the Twenty-First Century

ERIC Educational Resources Information Center

Stachokas, George

2009-01-01

The position of electronic resources librarian was created to serve as a specialist in the negotiation of license agreements for electronic resources, but mission creep has added more functions to the routine work of electronic resources such as cataloging, gathering information for collection development, and technical support. As electronic…

Sponsoring Organization | Division of Cancer Prevention

Cancer.gov

The National Cancer Institute (NCI) project officers are responsible for the design and oversight of all aspects of the PLCO trial. These NCI components work directly with the Coordinating Center which provides support for development and implementation of the study protocol; and with the Principal Investigators from each of the Screening Centers to ensure that the technical

Federal Programs Which May Support the Training of Neighborhood Residents for Jobs in Neighborhood Health Centers.

ERIC Educational Resources Information Center

Office of Economic Opportunity, Washington, DC. Community Action Program.

The following programs are included: (1) Manpower Development and Training Act, (2) New Careers, (3) Vocational and Technical Education, (4) Work Incentive (WIN), (5) Neighborhood Youth Corps, (6) Demonstration Projects, and (7) Veterans Administration Training Assistance. Information about each program includes nature and purpose, national and…

24 CFR 583.140 - Technical assistance.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Technical assistance. 583.140... Technical assistance. (a) General. HUD may set aside funds annually to provide technical assistance, either... technical assistance is for the purpose of promoting the development of supportive housing and supportive...

The Independent Technical Analysis Process Final Report 2006-2007.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duberstein, Corey; Ham, Kenneth; Dauble, Dennis

2007-03-01

The Bonneville Power Administration (BPA) contracted with the Pacific Northwest National Laboratory (PNNL) to provide technical analytical support for system-wide fish passage information (BPA Project No. 2006-010-00). The goal of this project was to produce rigorous technical analysis products using independent analysts and anonymous peer reviewers. This project provided an independent technical source for non-routine fish passage analyses while allowing routine support functions to be performed by other well-qualified entities. The Independent Technical Analysis Process (ITAP) was created to provide non-routine analysis for fish and wildlife agencies and tribes in particular and the public in general on matters related tomore » juvenile and adult salmon and steelhead passage through the mainstem hydrosystem. The process was designed to maintain the independence of analysts and reviewers from parties requesting analyses, to avoid potential bias in technical products. The objectives identified for this project were to administer a rigorous, transparent process to deliver unbiased technical assistance necessary to coordinate recommendations for storage reservoir and river operations that avoid potential conflicts between anadromous and resident fish. Seven work elements, designated by numbered categories in the Pisces project tracking system, were created to define and accomplish project goals as follows: (1) 118 Coordination - Coordinate technical analysis and review process: (a) Retain expertise for analyst/reviewer roles. (b) Draft research directives. (c) Send directive to the analyst. (d) Coordinate two independent reviews of the draft report. (e) Ensure reviewer comments are addressed within the final report. (2) 162 Analyze/Interpret Data - Implement the independent aspects of the project. (3) 122 Provide Technical Review - Implement the review process for the analysts. (4) 132 Produce Annual Report - FY06 annual progress report with Pisces Disseminate (5) 161 Disseminate Raw/Summary Data and Results - Post technical products on the ITAP web site. (6) 185-Produce Pisces Status Report - Provide periodic status reports to BPA. (7) 119 Manage and Administer Projects - project/contract administration.« less

Flight-vehicle structures education in the United States Assessment and recommendations

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Dixon, S. C.

1987-01-01

An assessment is made of the technical contents of flight-vehicle structures curricula at 41 U.S. universities with accredited aerospace engineering programs. The assessment is based on the technical needs for the new and projected aeronautical and space systems as well as on the likely characteristics of the aerospace engineering work environment. A number of deficiencies and areas of concern are identified and recommendations are presented for enhancing the effectiveness of flight-vehicle structures education. A number of government supported programs that can help aerospace engineering education are listed in the appendix.

United States Air Force College Science and Engineering Program. Volume 1

DTIC Science & Technology

1988-12-01

with debugging and testing Potfit and AtmBis and for explaining the chemical concepts necessary to understand these two programs. Dr. Phil Christiansen ...work interesting, and in general, making the summer an extremely informative experience. Mr. Russ Leighton gave me invaluable assistance in programming...help and guidance in all phases of my work. i My gratitude also extends to Russ Leighton for his technical advice; to Les Tepe for his support; to my

Cross-Cutting issues in Regulatory Supervision of Spent Fuel Radioactive Waste and Radioactively Contaminated Land in North-West Russia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sneve, M. K.; Smith, G. M.

2006-07-01

The Norwegian Government is promoting improvements in radiation protection and nuclear safety in North-West Russia. Among priority areas there is the improvement of spent nuclear fuel and radioactive waste management, as well as remediation operations at the Shore Technical Bases operated by Federal Enterprise SevRAO at Andreeva Bay and Gremikha on the Kola Peninsula. The extreme radiological conditions at these sites present novel difficulties for regulatory supervision of operations. The situation at these sites is such that the existing regulations are applicable, and actions to remedy the situation are not permitted under the current regulatory regime. An improved regulatory process,more » including development of special norms and rules, is required to take account of this unusual situation. The Norwegian strategy includes not only support to industrial projects, but also support to Russian Federation regulatory bodies, to ensure that work is carried out in compliance with Russian Federation law, taking account of international recommendations and other national good practice as relevant in the RF. Accordingly, the Norwegian Radiation Protection Authority has set up a programme of cooperation with the Federal Medical-Biological Agency (FMBA), which is the primary radiation protection authority in the RF. The work is carried out with technical input from the Russian Institute of Biophysics and with inputs from western technical support organisations. The overall objective of the work is to promote effective and efficient regulatory supervision of SevRAO activities at Andreeva Bay and Gremikha within the scope of responsibilities of FMBA. This paper describes the results of an initial threat assessment which allows consideration of the cross-cutting issues associated with developing an overall effective site management plan which deals with short- and long-term issues, and protection of workers as well as of the public and the environment, while achieving a timely and effective use of resources in order to solve the problems. (authors)« less

Technical Support for Contaminated Sites

EPA Science Inventory

In 1987, the U.S. Environmental Protection Agency’s (EPA) Office of Research and Development (ORD), Office of Land and Emergency Management, and EPA Regional waste management offices established the Technical Support Project. The creation of the Technical Support Project enabled...

Environmental Science and Research Foundation annual technical report: Calendar year 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morris, R.C.; Blew, R.D.

1997-07-01

This Annual Technical Report describes work conducted for the Department of Energy, Idaho Operations Office (DOE-ID), by the Environmental Science and Research Foundation (Foundation). The Foundation`s mission to DOE-ID provides support in several key areas. The authors conduct an environmental monitoring and surveillance program over an area covering much of the upper Snake River Plain, and provide environmental education and support services related to Idaho National Engineering and Environmental Laboratory (INEEL) natural resource issues. Also, the Foundation, with its University Affiliates, conducts ecological and radioecological research in the Idaho National Environmental Research Park. This research benefits major DOE-ID programs includingmore » Waste Management, Environmental Restoration, Spent Nuclear Fuels, and Land Management Issues. The major accomplishments of the Foundation and its University Affiliates during the calendar year 1996 are discussed.« less

Advanced experimental techniques for transonic wind tunnels - Final lecture

NASA Technical Reports Server (NTRS)

Kilgore, Robert A.

1987-01-01

A philosophy of experimental techniques is presented, suggesting that in order to be successful, one should like what one does, have the right tools, stick to the job, avoid diversions, work hard, interact with people, be informed, keep it simple, be self sufficient, and strive for perfection. Sources of information, such as bibliographies, newsletters, technical reports, and technical contacts and meetings are recommended. It is pointed out that adaptive-wall test sections eliminate or reduce wall interference effects, and magnetic suspension and balance systems eliminate support-interference effects, while the problem of flow quality remains with all wind tunnels. It is predicted that in the future it will be possible to obtain wind tunnel results at the proper Reynolds number, and the effects of flow unsteadiness, wall interference, and support interference will be eliminated or greatly reduced.

The Accreditation Experience of Clinical Laboratories and Blood Banks in Mexico

PubMed Central

2015-01-01

The accreditation of clinical laboratories and blood banks based on ISO 15189 is now being consolidated in Mexico, and is coordinated by the Mexican accreditation entity innovative strategies, A.C. (ema) and supported by the activities of the committee of clinical laboratories and blood banks. The active participation in working groups formed by the technical committee of clinical laboratories and blood banks in specific areas, has contributed to the formulation of technical documents and criteria of evaluation that strengthen the current accreditation scheme. The national registry of evaluation (PNE) consists of technical experts and evaluators from different disciplines of clinical laboratory; the evaluators actively participate in accreditation assessment, with an ultimate goal to receive training and feedback for continuous improvement of its own performance. PMID:27683498

The Obesity Learning Centre (OLC) – a website supporting those working towards a healthy weight and reducing obesity levels

PubMed Central

Korjonen, Helena

2011-01-01

Objectives: Develop a website, the OLC, which supports those people who work on promoting a healthy weight and tackling obesity. Research shows that original networks where sharing of information and peer interaction take place create solutions to current public health challenges. Methods: Considerations that are relevant when building a new information service as well as the technical set up and information needs of users were taken into account prior to building the OLC and during continuous development and maintenance. Results: The OLC provides global news, resources and tools and link out to other networks, websites and organisations providing similar useful information. The OLC also uses social networking tools to highlight new and important information. Discussion: Networks contribute to a stronger community that can respond to emerging challenges in public health. The OLC improves connections of people and services from different backgrounds and organisations. Some challenges exist in the technical set up and also because of other aspects, e.g. public health information and differing information needs. Conclusion: Public health work programmes should include networking opportunities where public policy can be disseminated. The provision of necessary tools and resources can lead to better decision-making, save time and money and lead to improved public health outcomes. PMID:23569599

NASA/WVU Software Research Laboratory, 1995

NASA Technical Reports Server (NTRS)

Sabolish, George J.; Callahan, John R.

1995-01-01

In our second year, the NASA/WVU Software Research Lab has made significant strides toward analysis and solution of major software problems related to V&V activities. We have established working relationships with many ongoing efforts within NASA and continue to provide valuable input into policy and decision-making processes. Through our publications, technical reports, lecture series, newsletters, and resources on the World-Wide-Web, we provide information to many NASA and external parties daily. This report is a summary and overview of some of our activities for the past year. This report is divided into 6 chapters: Introduction, People, Support Activities, Process, Metrics, and Testing. The Introduction chapter (this chapter) gives an overview of our project beginnings and targets. The People chapter focuses on new people who have joined the Lab this year. The Support chapter briefly lists activities like our WWW pages, Technical Report Series, Technical Lecture Series, and Research Quarterly newsletter. Finally, the remaining four chapters discuss the major research areas that we have made significant progress towards producing meaningful task reports. These chapters can be regarded as portions of drafts of our task reports.

Nurses' role transition from the clinical ward environment to the critical care environment.

PubMed

Gohery, Patricia; Meaney, Teresa

2013-12-01

To explore the experiences of nurses moving from the ward environment to the critical care environment. Critical care areas are employing nurses with no critical care experience due to staff shortage. There is a paucity of literature focusing on the experiences of nurses moving from the ward environment to the critical care environment. A Heideggerian phenomenology research approach was used in this study. In-depth semi structured interviews, supported with an interview guide, were conducted with nine critical care nurses. Data analysis was guided by Van Manen (1990) approach to phenomenological analysis. Four main themes emerged: The highs and lows, you need support, theory-practice gap, struggling with fear. The participants felt ill prepared and inexperienced to work within the stressful and technical environment of critical care due to insufficient education and support. The study findings indicated that a variety of feelings and emotions are experienced by ward nurses who move into the stressful and technical environment of critical care due to insufficient skills and knowledge. More education and support is required to improve this transition process. Copyright © 2013 Elsevier Ltd. All rights reserved.

Exploration Medical System Technical Architecture Overview

NASA Technical Reports Server (NTRS)

Cerro, J.; Rubin, D.; Mindock, J.; Middour, C.; McGuire, K.; Hanson, A.; Reilly, J.; Burba, T.; Urbina, M.

2018-01-01

The Exploration Medical Capability (ExMC) Element Systems Engineering (SE) goals include defining the technical system needed to support medical capabilities for a Mars exploration mission. A draft medical system architecture was developed based on stakeholder needs, system goals, and system behaviors, as captured in an ExMC concept of operations document and a system model. This talk will discuss a high-level view of the medical system, as part of a larger crew health and performance system, both of which will support crew during Deep Space Transport missions. Other mission components, such as the flight system, ground system, caregiver, and patient, will be discussed as aspects of the context because the medical system will have important interactions with each. Additionally, important interactions with other aspects of the crew health and performance system are anticipated, such as health & wellness, mission task performance support, and environmental protection. This talk will highlight areas in which we are working with other disciplines to understand these interactions.

Space Environments and Spacecraft Effects Organization Concept

NASA Technical Reports Server (NTRS)

Edwards, David L.; Burns, Howard D.; Miller, Sharon K.; Porter, Ron; Schneider, Todd A.; Spann, James F.; Xapsos, Michael

2012-01-01

The National Aeronautics and Space Administration (NASA) is embarking on a course to expand human presence beyond Low Earth Orbit (LEO) while also expanding its mission to explore the solar system. Destinations such as Near Earth Asteroids (NEA), Mars and its moons, and the outer planets are but a few of the mission targets. Each new destination presents an opportunity to increase our knowledge of the solar system and the unique environments for each mission target. NASA has multiple technical and science discipline areas specializing in specific space environments disciplines that will help serve to enable these missions. To complement these existing discipline areas, a concept is presented focusing on the development of a space environments and spacecraft effects (SENSE) organization. This SENSE organization includes disciplines such as space climate, space weather, natural and induced space environments, effects on spacecraft materials and systems and the transition of research information into application. This space environment and spacecraft effects organization will be composed of Technical Working Groups (TWG). These technical working groups will survey customers and users, generate products, and provide knowledge supporting four functional areas: design environments, engineering effects, operational support, and programmatic support. The four functional areas align with phases in the program mission lifecycle and are briefly described below. Design environments are used primarily in the mission concept and design phases of a program. Engineering effects focuses on the material, component, sub-system and system-level selection and the testing to verify design and operational performance. Operational support provides products based on real time or near real time space weather to mission operators to aid in real time and near-term decision-making. The programmatic support function maintains an interface with the numerous programs within NASA, other federal government agencies, and the commercial sector to ensure that communications are well established and the needs of the programs are being met. The programmatic support function also includes working in coordination with the program in anomaly resolution and generation of lessons learned documentation. The goal of this space environment and spacecraft effects organization is to develop decision-making tools and engineering products to support all mission phases from mission concept through operations by focusing on transitioning research to application. Products generated by this space environments and effects application are suitable for use in anomaly investigations. This paper will describe the scope of the TWGs and their relationship to the functional areas, and discuss an organizational structure for this space environments and spacecraft effects organization.

An Overview of the Space Environments and Spacecraft Effects Organization Concept

NASA Technical Reports Server (NTRS)

Edwards, David L.; Burns, Howard D.; Garrett, Henry B.; Miller, Sharon K.; Peddie, Darilyn; Porter Ron; Spann, James F.; Xapsos, Michael A.

2012-01-01

The National Aeronautics and Space Administration (NASA) is embarking on a course to expand human presence beyond Low Earth Orbit (LEO) while also expanding its mission to explore our Earth, and the solar system. Destinations such as Near Earth Asteroids (NEA), Mars and its moons, and the outer planets are but a few of the mission targets. Each new destination presents an opportunity to increase our knowledge on the solar system and the unique environments for each mission target. NASA has multiple technical and science discipline areas specializing in specific space environments fields that will serve to enable these missions. To complement these existing discipline areas, a concept is presented focusing on the development of a space environment and spacecraft effects (SESE) organization. This SESE organization includes disciplines such as space climate, space weather, natural and induced space environments, effects on spacecraft materials and systems, and the transition of research information into application. This space environment and spacecraft effects organization will be composed of Technical Working Groups (TWG). These technical working groups will survey customers and users, generate products, and provide knowledge supporting four functional areas: design environments, engineering effects, operational support, and programmatic support. The four functional areas align with phases in the program mission lifecycle and are briefly described below. Design environments are used primarily in the mission concept and design phases of a program. Environment effects focuses on the material, component, sub-system, and system-level response to the space environment and include the selection and testing to verify design and operational performance. Operational support provides products based on real time or near real time space weather to mission operators to aid in real time and near-term decision-making. The programmatic support function maintains an interface with the numerous programs within NASA, other federal government agencies, and the commercial sector to ensure that communications are well established and the needs of the programs are being met. The programmatic support function also includes working in coordination with the program in anomaly resolution and generation of lessons learned documentation. The goal of this space environment and spacecraft effects organization is to develop decision-making tools and engineering products to support all mission phases from mission concept through operations by focusing on transitioning research to application. Products generated by this space environments and effects application are suitable for use in anomaly investigations. This paper will describe the scope and purpose of the space environments and spacecraft effects organization and describe the TWG's and their relationship to the functional areas.

EPA'S GROUND WATER TECHNICAL SUPPORT CENTER

EPA Science Inventory

The purpose and the services provided by EPA's Ground Water Technical Support Center (GWTSC) will be presented. In 1987 the Office of Solid Waste and Emergency Response, Regional Waste Management Offices, and ORD established the Technical Support Project (TSP)

The purpos...

Advanced Simulation and Computing Fiscal Year 2016 Implementation Plan, Version 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCoy, M.; Archer, B.; Hendrickson, B.

2015-08-27

The Stockpile Stewardship Program (SSP) is an integrated technical program for maintaining the safety, surety, and reliability of the U.S. nuclear stockpile. The SSP uses nuclear test data, computational modeling and simulation, and experimental facilities to advance understanding of nuclear weapons. It includes stockpile surveillance, experimental research, development and engineering programs, and an appropriately scaled production capability to support stockpile requirements. This integrated national program requires the continued use of experimental facilities and programs, and the computational capabilities to support these programs. The purpose of this IP is to outline key work requirements to be performed and to control individualmore » work activities within the scope of work. Contractors may not deviate from this plan without a revised WA or subsequent IP.« less

What schools are doing around career development: implications for policy and practice.

PubMed

Perry, Justin C; Wallace, Eric W

2012-01-01

This article describes the role that schools are playing in supporting career development for young people. It examines the history of career-related programming in schools, including school-to-work programs, career and technical education, the college and career readiness movement, and current school reform initiatives. This understanding of schools' history, roles, opportunities, and constraints can help practitioners and policymakers think about how to build a system that supports youth development. Copyright © 2012 Wiley Periodicals, Inc., A Wiley Company.

Applications of ecological concepts and remote sensing technologies in archaeological site reconnaissance

NASA Technical Reports Server (NTRS)

Miller, W. Frank; Sever, Thomas L.; Lee, C. Daniel

1991-01-01

The concept of integrating ecological perspectives on early man's settlement patterns with advanced remote sensing technologies shows promise for predictive site modeling. Early work with aerial imagery and ecosystem analysis is discussed with respect to the development of a major project in Maya archaeology supported by NASA and the National Geographic Society with technical support from the Mississippi State Remote Sensing Center. A preliminary site reconnaissance model will be developed for testing during the 1991 field season.

United States Air Force Geophysics Scholar Program, 1982-1983.

DTIC Science & Technology

1984-03-01

Surveyor," Federal Geodetic Control Committee: FrCCIS-83-2, Rockville, Maryland. 2-13 Hothem, L.D., T. Vincenty and D.B. Hoyle , "Analyses of Doppler...to thank Fred Dale for his technical support and John Paulson for many helpful discussions. 9-3 I. Objectives Negative ion-molecule reactions play an...O’Malley, Phys. Rev. 150, 14 (1966). port of Fred Dale. This work has been supported in 2 L. Dub& and A. Herzenberg, Phys. Rev. Lett. 38, 820 (1977). part

Line focus concentrating collector for Copper Mountain Ski Resort, Colorado (Engineering Materials)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1983-06-02

The present invention is a device which develops an accurate line focus concentrating collector by flexural bending of thin reflective materials. This method avoids the need for expensive tooling and support frame fabrication. The technical work conducted during this quarter included completion of designs for the prototype system for the Copper Mountain Ski Resort in Colorado. Evaluation of alternate tracking and drive systems and final design of the support system. These drawings accompany DOE/CS/15072--T4.

KSC-99pp1265

NASA Image and Video Library

1999-10-29

Construction workers are silhouetted against the sky as they work on the girders of a support building, part of the new $8 million Reusable Launch Vehicle (RLV) Support Complex at Kennedy Space Center. The building is to be used for related ground support equipment and administrative/technical support. The RLV complex also includes a multi-purpose hangar. The complex will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The facility, jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC, will be operational in early 2000

Scientific and Technical Support for the Galileo Net Flux Radiometer Experiment

NASA Technical Reports Server (NTRS)

Sromovsky, Lawrence A.

1997-01-01

This report describes work in support of the Galileo Net Flux Radiometer (NFR), an instrument mounted on the Galileo probe, a spacecraft designed for entry into and direct measurements of Jupiter's atmosphere. Tasks originally proposed for the post launch period covered by NCC 2-854 are briefly as follows: attend and support PSG (Project Science Group) and other project science meetings; support in-flight checkouts; maintain and keep safe the spare instrument and GSE (Ground Support Equipment); organize and maintain documentation; finish NFR calibration measurements, documentation, and analysis; characterize and diagnose instrument anomalies; develop descent data analysis tools; and science data analysis and publication. Because we had the capability to satisfy a project support need we also subsequently proposed and were funded to make ground-based observations of Jupiter during the period surrounding the Galileo arrival at Jupiter, using the Swedish Solar Telescope at La Palma, Canary Islands. The following section provides background information on the NFR instrument. Section 3 contains the final report of work done.

An 8 year follow-up of a specialist supported employment service for high-ability adults with autism or Asperger syndrome.

PubMed

Howlin, Patricia; Alcock, Jennifer; Burkin, Catherine

2005-12-01

Few supported employment programmes have been specifically designed for people with autism, especially those who are more able. This study examines the outcome of a supported employment service (NAS Prospects) for adults with autism or Asperger syndrome (IQ 60+) over an 8 year period. Approximately 68 percent of clients found employment. Of the 192 jobs, the majority were permanent contracts and most involved administrative, technical or computing work. Assessment of current clients indicates that IQ, language skills and educational attainments are high. However, work has also been found for those of lower abilities. Individuals supported by Prospects show a rise in salaries, contribute more tax and claim fewer benefits. Satisfaction with the scheme is high among clients, employers and support workers. Although the programme continues to incur a financial deficit, this has decreased. Moreover, there are many non-financial benefits, which are difficult to quantify. The importance of specialist employment support of this kind is discussed.

Toward an evidence-based system for innovation support for implementing innovations with quality: tools, training, technical assistance, and quality assurance/quality improvement.

PubMed

Wandersman, Abraham; Chien, Victoria H; Katz, Jason

2012-12-01

An individual or organization that sets out to implement an innovation (e.g., a new technology, program, or policy) generally requires support. In the Interactive Systems Framework for Dissemination and Implementation, a Support System should work with Delivery Systems (national, state and/or local entities such as health and human service organizations, community-based organizations, schools) to enhance their capacity for quality implementation of innovations. The literature on the Support System [corrected] has been underresearched and under-developedThis article begins to conceptualize theory, research, and action for an evidence-based system for innovation support (EBSIS). EBSIS describes key priorities for strengthening the science and practice of support. The major goal of EBSIS is to enhance the research and practice of support in order to build capacity in the Delivery System for implementing innovations with quality, and thereby, help the Delivery System achieve outcomes. EBSIS is guided by a logic model that includes four key support components: tools, training, technical assistance, and quality assurance/quality improvement. EBSIS uses the Getting To Outcomes approach to accountability to aid the identification and synthesis of concepts, tools, and evidence for support. We conclude with some discussion of the current status of EBSIS and possible next steps, including the development of collaborative researcher-practitioner-funder-consumer partnerships to accelerate accumulation of knowledge on the Support System.

Primary care physicians’ experiences with electronic medical records

PubMed Central

Ludwick, Dave; Manca, Donna; Doucette, John

2010-01-01

OBJECTIVE To understand how remuneration and care setting affect the implementation of electronic medical records (EMRs). DESIGN Semistructured interviews were used to illicit descriptions from community-based family physicians (paid on a fee-for-service basis) and from urban, hospital, and academic family physicians (remunerated via alternative payment models or sessional pay for activities pertaining to EMR implementation). SETTING Small suburban community and large urban-, hospital-, and academic-based family medicine clinics in Alberta. All participants were supported by a jurisdictional EMR certification funding mechanism. PARTICIPANTS Physicians who practised in 1 or a combination of the above settings and had experience implementing and using EMRs. METHODS Purposive and maximum variation sampling was used to obtain descriptive data from key informants through individually conducted semistructured interviews. The interview guide, which was developed from key findings of our previous literature review, was used in a previous study of community-based family physicians on this same topic. Field notes were analyzed to generate themes through a comparative immersion approach. MAIN FINDINGS Physicians in urban, hospital, and academic settings leverage professional working relationships to investigate EMRs, a resource not available to community physicians. Physicians in urban, hospital, and academic settings work in larger interdisciplinary teams with a greater need for interdisciplinary care coordination, EMR training, and technical support. These practices were able to support the cost of project management or technical support resources. These physicians followed a planned system rollout approach compared with community physicians who installed their systems quickly and required users to transition to the new system immediately. Electronic medical records did not increase, or decrease, patient throughput. Physicians developed ways of including patients in the note-taking process. CONCLUSION We studied physicians’ procurement approaches under various payment models. Our findings do not suggest that one remuneration approach supports EMR adoption any more than another. Rather, this study suggests that stronger physician professional networks used in information gathering, more complete training, and in-house technical support might be more influential than remuneration in facilitating the EMR adoption experience. PMID:20090083

Facilitation of the Estuary/Ocean Subgroup and the Expert Regional Technical Group, Annual Report for 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Gary E.

This document is the annual report for the period September 1, 2014 through August 31, 2015 for the project—Facilitation of the Estuary/Ocean Subgroup (EOS) and the Expert Regional Technical Group (ERTG). Pacific Northwest National Laboratory (PNNL) conducted the project for the Bonneville Power Administration (BPA). The EOS and ERTG are part of the research, monitoring, and evaluation (RME) and habitat restoration efforts, respectively, developed by the Action Agencies (BPA, U.S. Army Corps of Engineers [Corps or USACE], and U.S. Bureau of Reclamation) in response to obligations arising from the Endangered Species Act as a result of operation of the Federalmore » Columbia River Power System (FCRPS) and implemented under the Columbia Estuary Ecosystem Restoration Program (CEERP). BPA/Corps (2015) explain the CEERP and the role of RME and the ERTG. For the purposes of this report, the lower Columbia River and estuary (LCRE) includes the floodplain from Bonneville Dam down through the lower river and estuary into the river’s plume in the ocean. The main purpose of this project is to facilitate EOS and ERTG meetings and work products. Other purposes are to provide technical support for CEERP adaptive management, CEERP restoration design challenges, and tributary RME. From 2002 through 2008, the EOS worked to design the federal RME program for the estuary/ocean (Johnson et al. 2008). From 2009 to the present day, EOS activities have involved RME implementation; however, EOS activities were minimal during the current reporting period. PNNL provided technical support to CEERP’s adaptive management process by convening 1.2 meetings of the Action Agencies (AAs) and drafting material for the “CEERP 2015 Restoration and Monitoring Plan” (BPA/Corps 2015).« less

Electronic Communities: a Forum for Supporting Women Professionals and Students in Technical and Scientific Fields

NASA Astrophysics Data System (ADS)

Single, Peg Boyle; Muller, Carol B.; Cunningham, Christine M.; Single, Richard M.

In this article, we report on electronic discussion lists (e-lists) sponsored by MentorNet, the National Electronic Industrial Mentoring Network for Women in Engineering and Science. Using the Internet, the MentorNet program connects students in engineering and science with mentors working in industry. These e-lists are a feature of MentorNet's larger electronic mentoring program and were sponsored to foster the establishment of community among women engineering and science students and men and women professionals in those fields. This research supports the hypothesis that electronic communications can be used to develop community among engineering and science students and professionals and identifies factors influencing the emergence of electronic communities (e-communities). The e-lists that emerged into self-sustaining e-communities were focused on topic-based themes, such as balancing personal and work life, issues pertaining to women in engineering and science, and job searching. These e-communities were perceived to be safe places, embraced a diversity of opinions and experiences, and sanctioned personal and meaningful postings on the part of the participants. The e-communities maintained three to four simultaneous threaded discussions and were sustained by professionals who served as facilitators by seeding the e-lists with discussion topics. The e-lists were sponsored to provide women students participating in MentorNet with access to groups of technical and scientific professionals. In addition to providing benefits to the students, the e-lists also provided the professionals with opportunities to engage in peer mentoring with other, mostly female, technical and scientific professionals. We discuss the implications of our findings for developing e-communities and for serving the needs of women in technical and scientific fields.

7 CFR 652.35 - State Conservationist decision.

Code of Federal Regulations, 2010 CFR

2010-01-01

... technical service provider, the technical service provider will be given written notice of that... technical service provider's written response and supporting documentation. Both a copy of the decision and..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE Decertification § 652.35...

Final Technical Report for GO17004 Regulatory Logic: Codes and Standards for the Hydrogen Economy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakarado, Gary L.

The objectives of this project are to: develop a robust supporting research and development program to provide critical hydrogen behavior data and a detailed understanding of hydrogen combustion and safety across a range of scenarios, needed to establish setback distances in building codes and minimize the overall data gaps in code development; support and facilitate the completion of technical specifications by the International Organization for Standardization (ISO) for gaseous hydrogen refueling (TS 20012) and standards for on-board liquid (ISO 13985) and gaseous or gaseous blend (ISO 15869) hydrogen storage by 2007; support and facilitate the effort, led by the NFPA,more » to complete the draft Hydrogen Technologies Code (NFPA 2) by 2008; with experimental data and input from Technology Validation Program element activities, support and facilitate the completion of standards for bulk hydrogen storage (e.g., NFPA 55) by 2008; facilitate the adoption of the most recently available model codes (e.g., from the International Code Council [ICC]) in key regions; complete preliminary research and development on hydrogen release scenarios to support the establishment of setback distances in building codes and provide a sound basis for model code development and adoption; support and facilitate the development of Global Technical Regulations (GTRs) by 2010 for hydrogen vehicle systems under the United Nations Economic Commission for Europe, World Forum for Harmonization of Vehicle Regulations and Working Party on Pollution and Energy Program (ECE-WP29/GRPE); and to Support and facilitate the completion by 2012 of necessary codes and standards needed for the early commercialization and market entry of hydrogen energy technologies.« less

The State of Early Childhood Higher Education in New York State. Technical Report

ERIC Educational Resources Information Center

Center for the Study of Child Care Employment, University of California at Berkeley, 2015

2015-01-01

The New York State Early Childhood Advisory Council (ECAC) serves the Governor and is charged with ensuring that all of New York's young children are healthy, learning, and thriving in families that are supported by a full complement of services and resources essential for successful development. The council's Workforce Work Group is dedicated to…

Hard Copy to Digital Transfer: 3D Models that Match 2D Maps

ERIC Educational Resources Information Center

Kellie, Andrew C.

2011-01-01

This research describes technical drawing techniques applied in a project involving digitizing of existing hard copy subsurface mapping for the preparation of three dimensional graphic and mathematical models. The intent of this research was to identify work flows that would support the project, ensure the accuracy of the digital data obtained,…

Integrated Surveillance for the Next Generation Air Transportation System. Final Report of the Integrated Surveillance Study Team

DTIC Science & Technology

2008-10-31

Navigation Services Working Group Jan de Regt FAA Tony Richardson JPDO Technical Support James Roberts DoD AFFSA Eric Rolfe JPDO Air Navigation...Kirsch DHS Drew Kuepper DoD eragency Architecture and Engineering Division Jay Merkle JPDO Int Paul Polski DHS ing GroupElizabeth Lynn ye JPDO Air

Pennsylvania's Career Support Tools: An Asset to Students, Parents, the Workplace and the Economy

ERIC Educational Resources Information Center

Wichowski, Chester P.; Kormanik, Gina; Evans, Cindy

2008-01-01

On October 25, 2006, the Academic Standards for Career Education and Work (CEW) were introduced to the public as a component of the Pennsylvania School Code. Developed by an expert panel of academic and career and technical educators, guidance counselors, persons from the business community, and several governmental agencies, these standards were…

Training and the Development of Curriculum Standards in On Farm Water Management: Pakistan, 1984-1985.

ERIC Educational Resources Information Center

Bergsma, Harold M.

The document describes the 18-month Phase I of the On Farm Management Project--supported by the World Bank and operated by Colorado State University and the Consortium for International Development--to design more systematic approaches to train people who will work in technical settings related to water management and irrigation channel…

Planning, evaluation and analytical studies in planetary quarantine and spacecraft sterilization

NASA Technical Reports Server (NTRS)

1972-01-01

The technical and analytical support used to aid in developing requirements for planetary quarantine are presented. The investigation was divided into 8 work tasks which are presented in tabular form. Data include methods of sterilization, safety margins for quarantine, revision of contamination logs for Mars and Venus, and estimates of encapsulated and 'free' microbial burden.

Motivational Properties of Support Staff Tasks in the Face of Automation.

ERIC Educational Resources Information Center

Garten, Edward D.

This paper maintains that staff needs which are both implicit and explicit within the automation-laden technical services work in a library setting most often do not receive adequate attention from the library's supervisory staff. It argues that analysis of problem areas within a given unit in the library can better promote positive strategies for…

Diversity or Difference? New Research Supports the Case for a Cultural Perspective on Women in Computing

ERIC Educational Resources Information Center

Frieze, Carol; Quesenberry, Jeria L.; Kemp, Elizabeth; Velazquez, Anthony

2012-01-01

Gender difference approaches to the participation of women in computing have not provided adequate explanations for women's declining interest in computer science (CS) and related technical fields. Indeed, the search for gender differences can work against diversity which we define as a cross-gender spectrum of characteristics, interests,…

Satellite antenna dish acquired for use by the BAA

NASA Astrophysics Data System (ADS)

Ashton, T.

2007-10-01

The Radio Astronomy Group (RAG) of the BAA is pleased to announce it has obtained the use of the 2.4m diameter, fully-steerable satellite antenna dish residing on the roof of the National Space Centre (NSC) in Leicester (see Figure). The RAG is fortunate in having its assistant coordinator, Jeff Lashley, employed by the NSC as a technical support engineer and Jeff has worked tirelessly with coordinator Dr Laurence Newell in seeking permission for the Group to use the dish for radio astronomy purposes. Support has also been forthcoming via Terry Ashton, our university liaison officer, who works at the University of Leicester's Space Research Centre (SRC) which owns the dish.

Mechanisms test bed math model modification and simulation support

NASA Technical Reports Server (NTRS)

Gilchrist, Andrea C.; Tobbe, Patrick A.

1995-01-01

This report summarizes the work performed under contract NAS8-38771 in support of the Marshall Space Flight Center Six Degree of Freedom Motion Facility and Flight Robotics Laboratory. The contract activities included the development of the two flexible body and Remote Manipulator System simulations, Dynamic Overhead Target Simulator control system and operating software, Global Positioning System simulation, and Manipulator Coupled Spacecraft Controls Testbed. Technical support was also provided for the Lightning Imaging Sensor and Solar X-Ray Imaging programs. The cover sheets and introductory sections for the documentation written under this contract are provided as an appendix.

KSC-99pp1259

NASA Image and Video Library

1999-10-29

Work continues on construction of the multi-purpose hangar at the site of the $8 million Reusable Launch Vehicle (RLV) Support Complex at Kennedy Space Center. In the background can be seen the new construction for the building that will house related ground support equipment and administrative/technical support. The RLV complex will be available to accommodate the Space Shuttle; the X-34 RLV technology demonstrator; the L-1011 carrier aircraft for Pegasus and X-34; and other RLV and X-vehicle programs. The complex is jointly funded by the Spaceport Florida Authority, NASA's Space Shuttle Program and KSC. The facility will be operational in early 2000

Nuclear Forensics International Technical Working Group (ITWG): a collaboration of scientists, law enforcement officials, and regulators working to combat nuclear terrorism and proliferation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwantes, Jon M.

Founded in 1996 upon the initiative of the “Group of 8” governments (G8), the Nuclear Forensics International Technical Working Group (ITWG) is an ad hoc organization of official Nuclear Forensics practitioners (scientists, law enforcement, and regulators) that can be called upon to provide technical assistance to the global community in the event of a seizure of nuclear or radiological materials. The ITWG is supported by and is affiliated with nearly 40 countries and international partner organizations including the International Atomic Energy Agency (IAEA), EURATOM, INTERPOL, EUROPOL, and the United Nations Interregional Crime and Justice Research Institute (UNICRI) (Figure 1). Besidesmore » providing a network of nuclear forensics laboratories that are able to assist the global community during a nuclear smuggling event, the ITWG is also committed to the advancement of the science of nuclear forensic analysis, largely through participation in periodic table top and Collaborative Materials Exercises (CMXs). Exercise scenarios use “real world” samples with realistic forensics investigation time constraints and reporting requirements. These exercises are designed to promote best practices in the field and test, evaluate, and improve new technical capabilities, methods and techniques in order to advance the science of nuclear forensics. Past efforts to advance nuclear forensic science have also included scenarios that asked laboratories to adapt conventional forensics methods (e.g. DNA, fingerprints, tool marks, and document comparisons) for collecting and preserving evidence comingled with radioactive materials.« less

JV Task 120 - Coal Ash Resources Research Consortium Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Debra Pflughoeft-Hassett; Loreal Heebink; David Hassett

2009-03-28

The Coal Ash Resources Research Consortium{reg_sign} (CARRC{reg_sign}, pronounced 'cars') is the core coal combustion product (CCP) research group at the Energy & Environmental Research Center (EERC). CARRC focuses on performing fundamental and applied scientific and engineering research emphasizing the environmentally safe, economical use of CCPs. CARRC member organizations, which include utilities and marketers, are key to developing industry-driven research in the area of CCP utilization and ensuring its successful application. The U.S. Department of Energy is a partner in CARRC through the EERC Jointly Sponsored Research Program, which provides matching funds for industrial member contributions and facilitates an increased levelmore » of effort in CARRC. CARRC tasks were designed to provide information on CCP performance, including environmental performance, engineering performance, favorable economics, and improved life cycle of products and projects. CARRC technical research tasks are developed based on member input and prioritization. CARRC special projects are developed with members and nonmembers to provide similar information and to support activities, including the assembly and interpretation of data, support for standards development and technology transfer, and facilitating product development and testing. CARRC activities from 2007 to 2009 included a range of research tasks, with primary work performed in laboratory tasks developed to answer specific questions or evaluate important fundamental properties of CCPs. The tasks were included in four categories: (1) Environmental Evaluations of CCPs; (2) Evaluation of Impacts on CCPs from Emission Controls; (3) Construction and Product-Related Activities; and (4) Technology Transfer and Maintenance Tasks. All tasks are designed to work toward achieving the CARRC overall goal and supporting objectives. The various tasks are coordinated in order to provide broad and useful technical data for CARRC members. Special projects provide an opportunity for non-CARRC members to sponsor specific research or technology transfer consistent with CARRC goals. This report covers CARRC activities from January 2007 through March 2009. These activities have been reported in CARRC Annual Reports and in member meetings over the past 2 years. CARRC continues to work with industry and various government agencies with its research, development, demonstration, and promotional activities nearing completion at the time of submission of this report. CARRC expects to continue its service to the coal ash industry in 2009 and beyond to work toward the common goal of advancing coal ash utilization by solving CCP-related technical issues and promoting the environmentally safe, technically sound, and economically viable management of these complex and changing materials.« less

The image acquisition system design of floor grinder

NASA Astrophysics Data System (ADS)

Wang, Yang-jiang; Liu, Wei; Liu, Hui-qin

2018-01-01

Based on linear CCD, high resolution image real-time acquisition system serves as designing a set of image acquisition system for floor grinder through the calculation of optical imaging system. The entire image acquisition system can collect images of ground before and after the work of the floor grinder, and the data is transmitted through the Bluetooth system to the computer and compared to realize real-time monitoring of its working condition. The system provides technical support for the design of unmanned ground grinders.

Technical Support Document for Version 3.6.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2009-09-29

This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

[Home hemodialysis: the technical overview. A 2010 survey].

PubMed

Ponson, Laurent; Arkouche, Walid; Laville, Maurice

2012-04-01

Compared to the daily work in dialysis units, home haemodialysis represents a particular task for the technical services of healthcare facilities. This survey concerns this modality of treatment of end-stage chronic renal failure, and was led to three objectives: to make a snapshot of the practices done by the technical staff, to point out significant differences, and to identify common issues. This is also an opportunity to discuss about the future of this treatment. Numbers of registries show a continuous decline of home haemodialysis during past decades. This could be explained by many factors, but on the other hand several points tend to forecast a renewed interest for this method of treatment. A questionnaire was sent to every technical service of health organizations dispensing dialysis in France. Seventeen health facilities providing home haemodialysis have sent back their information, representing 238 patients, that to say almost the totality of the patients of the country. These data were analysed, relevant indicators were sorted out, so that initial objectives could be completed. The results are explained as follows: site activities, procedures before and during patient installation, equipment, preventive visits, and corrective maintenance. In lack of a precise regulation on the technical support of these patients, significant differences of operations were noted and are detailed, as well as several common difficulties. All these elements can be used as a basis for the development of a practical guide intended to technical services. This work is voluntarily centered on the technical aspects, but other levers exist to revitalize this method. Copyright © 2012 Association Société de néphrologie. Published by Elsevier SAS. All rights reserved.

Analysis of stakeholders networks of infant and young child nutrition programmes in Sri Lanka, India, Nepal, Bangladesh and Pakistan.

PubMed

Uddin, Shahadat; Mahmood, Hana; Senarath, Upul; Zahiruddin, Quazi; Karn, Sumit; Rasheed, Sabrina; Dibley, Michael

2017-06-13

Effective public policies are needed to support appropriate infant and young child feeding (IYCF) to ensure adequate child growth and development, especially in low and middle income countries. The aim of this study was to: (i) capture stakeholder networks in relation to funding and technical support for IYCF policy across five countries in South Asia (i.e. Sri Lanka, India, Nepal, Bangladesh and Pakistan); and (ii) understand how stakeholder networks differed between countries, and identify common actors and their patterns in network engagement across the region. The Net-Map method, which is an interview-based mapping technique to visualise and capture connections among different stakeholders that collaborate towards achieving a focused goal, has been used to map funding and technical support networks in all study sites. Our study was conducted at the national level in Bangladesh, India, Nepal, and Sri Lanka, as well as in selected states or provinces in India and Pakistan during 2013-2014. We analysed the network data using a social network analysis software (NodeXL). The number of stakeholders identified as providing technical support was higher than the number of stakeholders providing funding support, across all study sites. India (New Delhi site - national level) site had the highest number of influential stakeholders for both funding (43) and technical support (86) activities. Among all nine study sites, India (New Delhi - national level) and Sri Lanka had the highest number of participating government stakeholders (22) in their respective funding networks. Sri Lanka also had the highest number of participating government stakeholders for technical support (34) among all the study sites. Government stakeholders are more engaged in technical support activities compared with their involvement in funding activities. The United Nations Children's Emergency Fund (UNICEF) and the World Health Organization (WHO) were highly engaged stakeholders for both funding and technical support activities across all study sites. International stakeholders were highly involved in both the funding and technical support activities related to IYCF practices across these nine study sites. Government stakeholders received more support for funding and technical support activities from other stakeholders compared with the support that they offered. Stakeholders were, in general, more engaged for technical support activities compared with the funding activities.

FY 1987 current fiscal year work plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This Current Year Work Plan presents a detailed description of the activities to be performed by the Joint Integration Office during FY87. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance, task monitoring, informationmore » gathering and task reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of program status reports for DOE. Program Analysis is performed by the JIO to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. This work plan includes: system analyses, requirements analyses, interim and procedure development, legislative and regulatory analyses, dispatch and traffic analyses, and data bases.« less

Work Breakdown Structure (WBS) and WBS dictionary. [advanced x ray astrophysics facility (AXAF)

NASA Technical Reports Server (NTRS)

Cocuzzo, F.

1994-01-01

This document is intended to provide the framework for defining all work to be accomplished under the proposed contract for the mission support program as defined by Section J-1 Statement of Work (SOW) of the RFP No.8-1-3-TA-50030 dated 11/2/93. The time period of performance of this contract will be from 3/1/94 through to the end of fiscal 1999. In addition to providing the framework for the integration of the cost, schedule, and manpower planning necessary to accomplish this work it establishes the association among the WBS elements, the SOW, and the Technical Proposal.

[The institutional promotion of good practices in the operational management of health and safety: the experience of Italy Crown Aerosols on the monitoring of behavior].

PubMed

de Merich, D; Pellicci, M; Serignoli, R

2010-01-01

Within the intelligence support and training to small and medium-sized enterprises (SMEs) and promoting a culture of health and safety at work, ISPESL is engaged on two fundamental pillars of activity: Consolidation of the national surveillance system of injuries through the promotion of methods and tools for the reconstruction of the dynamics incidental identification of causal determinants, with the aim of improving the capabilities of risk assessment of systems to prevent corporate. The promotion of good working practices, as Focal Point of the European Health and Safety at Work in Bilbao, the goal is to support prevention activities by providing business application examples of measures for improvement (technical, organizational, procedural) made in the proposing firms and validated by a technical appraisal conducted by ISPESL. Among the methodologies and tools that can be made available to companies in the operational management of health and safety in work activities, the approach to analyze and evaluate the behavior implemented by all persons within the company (managers, employees, workers) is a the most innovative preventive strategies that can be implemented to correct any improper practices behavioral wrongly tolerated in everyday work practice. The experience of Crown Aerosol Italy, the program "STOP TO ACCIDENTS, 2009 Best Practices award in the competition on the theme" Risk Assessment ", aims to demonstrate how the application of a method for monitoring behavior at work, shared in its planning with all those business, has not only reached but would assist the organization has developed at an individual level greater awareness and sense of responsibility also to their colleagues, by promoting good working practices.

Technical Assistance Program: Off to a Running Start (Newsletter)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This newsletter describes key activities of the DOE Office of Indian Energy Policy and Programs for Winter 2012. Between December 2, 2011, and January 15, 2012, 46 American Indian and Alaska Native Tribes submitted applications to receive technical assistance through the program, which provides Tribes with on-the-ground technical support from DOE and National Renewable Energy Laboratory (NREL) staff to help move tribal energy efficiency and renewable energy projects forward. The applications are being considered through the Strategic Technical Assistance Response Team (START) selection process, which incorporates expert reviews and outreach to Tribes who present a need for assistance with theirmore » community-based energy efficiency and renewable energy projects. The final successful applicants will be selected based on the clarity of their requests for technical assistance and the ability of START to successfully work with each unique project or community. At least three selected Tribes in Alaska will receive technical assistance between March and May 2012, and up to five selected Tribes in the contiguous United States will receive technical assistance between March and August 2012. During the months of START Program activity, DOE and NREL experts will work in the two locations. In Alaska, START experts will work directly with community-based project teams to analyze local energy issues and provide assistance with energy projects and cost savings initiatives. This effort will be bolstered by DOE-IE's partnership with the Denali Commission, which will provide further assistance and expertise. In the lower 48 states, NREL experts will work with the selected renewable energy START projects to evaluate financial and technical feasibility and provide early development technical assistance to better position the projects for financing and construction. This on-the-ground technical assistance is part of a broader DOE-IE effort to make reliable, accurate technical information and skills-based training available to tribal communities throughout the United States. The primary goal of the START initiative, according to DOE-IE Director Tracey A. LeBeau, is to bring about the next generation of energy development in Indian Country. Through energy project planning, quality training, and technical assistance, The START program will leverage the early-stage resource characterization and pre-feasibility investments that DOE has made in Indian Country over the years, and unlock the energy resources that exist on tribal lands to help build a 21st century tribal energy economy. Working collaboratively with a select group of Tribes and Alaska Native entities, the DOE Office of Indian Energy, NREL, and the Denali Commission will empower tribal leaders to make informed energy decisions and help build capacity to bring tribal energy visions to fruition and get renewable energy projects off the ground, said LeBeau. Ultimately, these efforts will serve to further the Obama Administration and DOE's shared commitment to provide Native American and Alaska Native communities with the tools and resources they need to foster tribal energy self-sufficiency and sustainability, advancing job creation and enhancing economic competitiveness.« less

Report on International Spaceborne Imaging Spectroscopy Technical Committee Calibration and Validation Workshop, National Environment Research Council Field Spectroscopy Facility, University of Edinburgh

NASA Technical Reports Server (NTRS)

Ong, C,; Mueller, A.; Thome, K.; Bachmann, M.; Czapla-Myers, J.; Holzwarth, S.; Khalsa, S. J.; Maclellan, C.; Malthus, T.; Nightingale, J.;

75 FR 19297 - Energy Conservation Program: Public Meeting and Availability of the Preliminary Technical Support...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-14

... Conservation Program: Public Meeting and Availability of the Preliminary Technical Support Document for Walk-In... and availability of the preliminary technical support document regarding energy conservation standards..., the deadline for requesting to speak at the public meeting, and the deadline for submitting written...

40 CFR Appendix A to Part 67 - Technical Support Document

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Technical Support Document A Appendix A to Part 67 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...—Technical Support Document Note: EPA will make copies of appendix A available from: Director, Stationary...

40 CFR Appendix A to Part 66 - Technical Support Document

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Technical Support Document A Appendix A to Part 66 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...—Technical Support Document Note: For text of appendix A see appendix A to part 67. ...

Standards to support information systems integration in anatomic pathology.

PubMed

Daniel, Christel; García Rojo, Marcial; Bourquard, Karima; Henin, Dominique; Schrader, Thomas; Della Mea, Vincenzo; Gilbertson, John; Beckwith, Bruce A

2009-11-01

Integrating anatomic pathology information- text and images-into electronic health care records is a key challenge for enhancing clinical information exchange between anatomic pathologists and clinicians. The aim of the Integrating the Healthcare Enterprise (IHE) international initiative is precisely to ensure interoperability of clinical information systems by using existing widespread industry standards such as Digital Imaging and Communication in Medicine (DICOM) and Health Level Seven (HL7). To define standard-based informatics transactions to integrate anatomic pathology information to the Healthcare Enterprise. We used the methodology of the IHE initiative. Working groups from IHE, HL7, and DICOM, with special interest in anatomic pathology, defined consensual technical solutions to provide end-users with improved access to consistent information across multiple information systems. The IHE anatomic pathology technical framework describes a first integration profile, "Anatomic Pathology Workflow," dedicated to the diagnostic process including basic image acquisition and reporting solutions. This integration profile relies on 10 transactions based on HL7 or DICOM standards. A common specimen model was defined to consistently identify and describe specimens in both HL7 and DICOM transactions. The IHE anatomic pathology working group has defined standard-based informatics transactions to support the basic diagnostic workflow in anatomic pathology laboratories. In further stages, the technical framework will be completed to manage whole-slide images and semantically rich structured reports in the diagnostic workflow and to integrate systems used for patient care and those used for research activities (such as tissue bank databases or tissue microarrayers).

Automation of the electron-beam welding process

NASA Astrophysics Data System (ADS)

Koleva, E.; Dzharov, V.; Kardjiev, M.; Mladenov, G.

2016-03-01

In this work, the automatic control is considered of the vacuum and cooling systems of the located in the IE-BAS equipment for electron-beam welding, evaporation and surface modification. A project was elaborated for the control and management based on the development of an engineering support system using existing and additional technical means of automation. Optimization of the indicators, which are critical for the duration of reaching the working regime and stopping the operation of the installation, can be made using experimentally obtained transient characteristics. The automation of the available equipment aimed at improving its efficiency and the repeatability of the obtained results, as well as at stabilizing the process parameters, should be integrated in an Engineering Support System which, besides the operator supervision, consists of several subsystems for equipment control, data acquisition, information analysis, system management and decision-making support.

Analysis and assessment of STES technologies

NASA Astrophysics Data System (ADS)

Brown, D. R.; Blahnik, D. E.; Huber, H. D.

1982-12-01

Technical and economic assessments completed in FY 1982 in support of the Seasonal Thermal Energy Storage (STES) segment of the Underground Energy Storage Program included: (1) a detailed economic investigation of the cost of heat storage in aquifers, (2) documentation for AQUASTOR, a computer model for analyzing aquifer thermal energy storage (ATES) coupled with district heating or cooling, and (3) a technical and economic evaluation of several ice storage concepts. This paper summarizes the research efforts and main results of each of these three activities. In addition, a detailed economic investigation of the cost of chill storage in aquifers is currently in progress. The work parallels that done for ATES heat storage with technical and economic assumptions being varied in a parametric analysis of the cost of ATES delivered chill. The computer model AQUASTOR is the principal analytical tool being employed.

Do failures in non-technical skills contribute to fatal medical accidents in Japan? A review of the 2010-2013 national accident reports.

PubMed

Uramatsu, Masashi; Fujisawa, Yoshikazu; Mizuno, Shinya; Souma, Takahiro; Komatsubara, Akinori; Miki, Tamotsu

2017-02-16

We sought to clarify how large a proportion of fatal medical accidents can be considered to be caused by poor non-technical skills, and to support development of a policy to reduce number of such accidents by making recommendations about possible training requirements. Summaries of reports of fatal medical accidents, published by the Japan Medical Safety Research Organization, were reviewed individually. Three experienced clinicians and one patient safety expert conducted the reviews to determine the cause of death. Views of the patient safety expert were given additional weight in the overall determination. A total of 73 summary reports of fatal medical accidents were reviewed. These reports had been submitted by healthcare organisations across Japan to the Japan Medical Safety Research Organization between April 2010 and March 2013. The cause of death in fatal medical accidents, categorised into technical skills, non-technical skills and inevitable progress of disease were evaluated. Non-technical skills were further subdivided into situation awareness, decision making, communication, team working, leadership, managing stress and coping with fatigue. Overall, the cause of death was identified as non-technical skills in 34 cases (46.6%), disease progression in 33 cases (45.2%) and technical skills in two cases (5.5%). In two cases, no consensual determination could be achieved. Further categorisation of cases of non-technical skills were identified as 14 cases (41.2%) of problems with situation awareness, eight (23.5%) with team working and three (8.8%) with decision making. These three subcategories, or combinations of them, were identified as the cause of death in 33 cases (97.1%). Poor non-technical skills were considered to be a significant cause of adverse events in nearly half of the fatal medical accidents examined. Improving non-technical skills may be effective for reducing accidents, and training in particular subcategories of non-technical skills may be especially relevant. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Supporting structures for team situation awareness and decision making: insights from four delivery suites.

PubMed

Mackintosh, Nicola; Berridge, Emma-Jane; Freeth, Della

2009-02-01

'Human factors' (non-technical skills such as communication and teamwork) have been strongly implicated in adverse events during labour and delivery. The importance of shared 'situation awareness' between team members is highlighted as a key factor in patient safety. Arising from an ethnographic study of safety culture in the delivery suites of four UK hospitals, the aim of this study is to describe the main mechanisms supporting team situation awareness (TSA) and examine contrasting configurations of supports. Stage I: 177 hours of lightly structured non-participant observation (sensitizing concepts: safety culture, non-technical skills, teamwork and decision making) analysed to identify a core organizing concept, main supporting categories and preliminary conceptual models. Stage II: (approximately 11 months after first observations) 104 hours of observation to test and elaborate stage I analyses. Handover, whiteboard use and a coordinator role emerged as the key processes facilitating work and team coordination. The interplay between these supporting processes and the contextual features of each site promoted or inhibited TSA. Three configurations of supports for TSA were evident. These are described. Context configurations of supporting mechanisms and artefacts influence TSA, with implications for the maintenance of patient safety on delivery suites. A balanced model of supports for TSA is commended. Examining contrasting configurations helps reveal how local mechanisms or organizational, environmental and temporal factors might be manipulated to improve TSA.

Configuration Management Plan for the Tank Farm Contractor

DOE Office of Scientific and Technical Information (OSTI.GOV)

WEIR, W.R.

The Configuration Management Plan for the Tank Farm Contractor describes configuration management the contractor uses to manage and integrate its technical baseline with the programmatic and functional operations to perform work. The Configuration Management Plan for the Tank Farm Contractor supports the management of the project baseline by providing the mechanisms to identify, document, and control the technical characteristics of the products, processes, and structures, systems, and components (SSC). This plan is one of the tools used to identify and provide controls for the technical baseline of the Tank Farm Contractor (TFC). The configuration management plan is listed in themore » management process documents for TFC as depicted in Attachment 1, TFC Document Structure. The configuration management plan is an integrated approach for control of technical, schedule, cost, and administrative processes necessary to manage the mission of the TFC. Configuration management encompasses the five functional elements of: (1) configuration management administration, (2) configuration identification, (3) configuration status accounting, (4) change control, and (5 ) configuration management assessments.« less

Ocean gliders as key component within the AORAC-SA

NASA Astrophysics Data System (ADS)

Barrera, C.; Hernandez Brito, J.; Castro, A.; Rueda, M. J.; Llinas, O.

2016-02-01

The Atlantic Ocean Research Alliance Coordination and Support Action (AORAC-SA) is designed to provide scientific, technical and logistical support to the EU in developing and implementing transAtlantic Marine Research Cooperation between the European Union, the United States of America and Canada. The Coordination and Support Action (CSA) is carried out within the framework of the Atlantic Ocean Research Alliance (AORA) as outlined in the Galway Statement on Atlantic Ocean Cooperation (May 2013). The CSA will be responsible for the organization of expert and stakeholder meetings, workshops and conferences required by the AORA and related to identified research priorities support actions and other initiatives as they arise, taking into account related Horizon 2020 supported transAtlantic projects and on-going national and EU collaborative projects. The AORAC-SA support and governance structure comprises a Secretariat and Management Team, guided by a high-level Operational Board, representative of the major European Marine Research Programming and Funding Organizations as well as those of the USA and Canada. As example of this research cooperative framework, ocean gliders have become nowadays a common, innovative and sustainable ocean-observations tool for the Atlantic basin, linking research groups, govermental institutions and private companies from both sides in terms of technical developments, transatlantic missions in partnership, training forums, etc. aiming to develop common practices and protocols for a better ocean resources management and understanding. Within this context, the Oceanic Platform of the Canary Islands (PLOCAN), as AORAC-SA partner, is working on specific actions like ocean glider observations programs (endurance line) by AtlantOS project (www.atlantos-h2020.eu), related new technical developments by NeXOS FP-7 project (www.nexosproject.eu) and a yearly International Glider School forum hosting (www.gliderschool.eu).

Validity evidence as a key marker of quality of technical skill assessment in OTL-HNS.

PubMed

Labbé, Mathilde; Young, Meredith; Nguyen, Lily H P

2018-01-13

Quality monitoring of assessment practices should be a priority in all residency programs. Validity evidence is one of the main hallmarks of assessment quality and should be collected to support the interpretation and use of assessment data. Our objective was to identify, synthesize, and present the validity evidence reported supporting different technical skill assessment tools in otolaryngology-head and neck surgery (OTL-HNS). We performed a secondary analysis of data generated through a systematic review of all published tools for assessing technical skills in OTL-HNS (n = 16). For each tool, we coded validity evidence according to the five types of evidence described by the American Educational Research Association's interpretation of Messick's validity framework. Descriptive statistical analyses were conducted. All 16 tools included in our analysis were supported by internal structure and relationship to variables validity evidence. Eleven articles presented evidence supporting content. Response process was discussed only in one article, and no study reported on evidence exploring consequences. We present the validity evidence reported for 16 rater-based tools that could be used for work-based assessment of OTL-HNS residents in the operating room. The articles included in our review were consistently deficient in evidence for response process and consequences. Rater-based assessment tools that support high-stakes decisions that impact the learner and programs should include several sources of validity evidence. Thus, use of any assessment should be done with careful consideration of the context-specific validity evidence supporting score interpretation, and we encourage deliberate continual assessment quality-monitoring. NA. Laryngoscope, 2018. © 2018 The American Laryngological, Rhinological and Otological Society, Inc.

Advances in participatory occupational health aimed at good practices in small enterprises and the informal sector.

PubMed

Kogi, Kazutaka

2006-01-01

Participatory programmes for occupational risk reduction are gaining importance particularly in small workplaces in both industrially developing and developed countries. To discuss the types of effective support, participatory steps commonly seen in our "work improvement-Asia" network are reviewed. The review covered training programmes for small enterprises, farmers, home workers and trade union members. Participatory steps commonly focusing on low-cost good practices locally achieved have led to concrete improvements in multiple technical areas including materials handling, workstation ergonomics, physical environment and work organization. These steps take advantage of positive features of small workplaces in two distinct ways. First, local key persons are ready to accept local good practices conveyed through personal, informal approaches. Second, workers and farmers are capable of understanding technical problems affecting routine work and taking flexible actions leading to solving them. This process is facilitated by the use of locally adjusted training tools such as local good examples, action checklists and group work methods. It is suggested that participatory occupational health programmes can work in small workplaces when they utilize low-cost good practices in a flexible manner. Networking of these positive experiences is essential.

Final Technical Report: Fundamental Research on the Fractionation of Carbon Isotopes during Photosynthesis, New Interpretations of Terrestrial Organic Carbon within Geologic Substrates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schubert, Brian; Jahren, A. Hope

The goal for the current grant period (2013 – 2016) was to quantify the effect of changing atmospheric carbon dioxide concentration (pCO2) on published terrestrial carbon isotope excursion events. This work supported four scientists across multiple career stages, and resulted in 5 published papers.

Do Joint Fighter Programs Save Money? Technical Appendixes on Methodology

DTIC Science & Technology

2013-01-01

Bookstore Make a charitable contribution Limited Electronic Distribution Rights This document and trademark(s) contained herein are protected by...research clients and sponsors. Support RAND—make a tax-deductible charitable contribution at www.rand.org/giving/contribute.html R® is a registered...Evidence, Organisation for Economic Co-Operation and Development, Economics Department Working Paper 317, January 17, 2002. Anderson, Fred, Northrop

Reassessing the Skills Required of Graduates of an Information Systems Program: An Updated Analysis

ERIC Educational Resources Information Center

Legier, John; Woodward, Belle; Martin, Nancy

2013-01-01

The study involves an updated analysis of the job characteristics of information systems graduates based on the status of the job market as well as the perceptions of 72 graduates from an information systems program of a Midwestern university. Approximately one-third of the graduates were working in positions related to technical support.…

75 FR 30825 - Draft Toxicological Review of Formaldehyde in Support of Summary Information on the Integrated...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-02

... session is to allow all interested parties to present scientific and technical comments on draft IRIS..., they should also submit written comments at least 5 working days before the meeting date announced on... August 31, 2010. Comments should be in writing and must be received by EPA by August 31, 2010. The...

Longitudinal Surveys of Australian Youth (LSAY) 2006 Cohort: Wave 6 (2011)--Questionnaire. Technical Report 75A

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2012

2012-01-01

The Longitudinal Surveys of Australian Youth (LSAY) program studies the progress of several groups of young Australians as they move from school into post-secondary education and work. This series of documents provides supporting information for the LSAY data set of the 2006 cohort at wave 6 (2011). The document presents the questionnaire for LSAY…

Sustaining 21st Century Community Learning Centers: What Works for Programs and How Policymakers Can Help. Strategy Brief

ERIC Educational Resources Information Center

Szekely, Amanda; Padgette, Heather Clapp

2006-01-01

This tool is part of a series of technical assistance resources on financing and sustaining out-of-school time and community school initiative. These tools and resources are intended to assist policymakers, program developers and community leaders in developing financing and sustainability strategies to support effective initiatives. For nearly a…

Systems of Continuing Education: Priority to District Health Personnel. Report of a WHO Expert Committee. Technical Report Series 803.

ERIC Educational Resources Information Center

World Health Organization, Geneva (Switzerland).

Continuing education systems can improve the performance of health workers in countries around the world and support the functioning of district health systems. Continuing education guides health personnel toward the principles and methods of primary health care and improves their work with the community and family to attain an adequate level of…

The Experience of Servant Leaders Who Work in the Field of Corporate Information Technology: A Phenomenological Investigation

ERIC Educational Resources Information Center

Wright, Greggory S.

2013-01-01

The field of IT is a service-based field where professionals help others with technical, computer-related issues by supporting organizational goals. Therefore, the field of IT, even unknowingly, practices parts or all aspects of servant leadership. Little research is published on servant leadership models and practices within the field of…

Group Multilateral Relation Analysis Based on Large Data

NASA Astrophysics Data System (ADS)

LIU, Qiang; ZHOU, Guo-min; CHEN, Guang-xuan; XU, Yong

2017-09-01

Massive, multi-source, heterogeneous police data and social data brings challenges to the current police work. The existing massive data resources are studied as the research object to excavate the group of multilateral relations by using large data technology for data archiving. The results of the study could provide technical support to police enforcement departments for fighting crime and preventing crime.

Final Technical Report: Sparse Grid Scenario Generation and Interior Algorithms for Stochastic Optimization in a Parallel Computing Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mehrotra, Sanjay

2016-09-07

The support from this grant resulted in seven published papers and a technical report. Two papers are published in SIAM J. on Optimization [87, 88]; two papers are published in IEEE Transactions on Power Systems [77, 78]; one paper is published in Smart Grid [79]; one paper is published in Computational Optimization and Applications [44] and one in INFORMS J. on Computing [67]). The works in [44, 67, 87, 88] were funded primarily by this DOE grant. The applied papers in [77, 78, 79] were also supported through a subcontract from the Argonne National Lab. We start by presenting ourmore » main research results on the scenario generation problem in Sections 1–2. We present our algorithmic results on interior point methods for convex optimization problems in Section 3. We describe a new ‘central’ cutting surface algorithm developed for solving large scale convex programming problems (as is the case with our proposed research) with semi-infinite number of constraints in Section 4. In Sections 5–6 we present our work on two application problems of interest to DOE.« less

40 CFR 412.31 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2010 CFR

2010-07-01

... supporting technical analysis and any other relevant information and data that would support such site... event. The technical analysis of the discharge of pollutants must include: (A) All daily inputs to the... the supporting technical analysis, including inspection of the CAFO. (3) The CAFO shall attain the...

40 CFR 412.31 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2011 CFR

2011-07-01

... supporting technical analysis and any other relevant information and data that would support such site... event. The technical analysis of the discharge of pollutants must include: (A) All daily inputs to the... the supporting technical analysis, including inspection of the CAFO. (3) The CAFO shall attain the...

Effluent Management Facility Evaporator Bottom-Waste Streams Formulation and Waste Form Qualification Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saslow, Sarah A.; Um, Wooyong; Russell, Renee L.

This report describes the results from grout formulation and cementitious waste form qualification testing performed by Pacific Northwest National Laboratory (PNNL) for Washington River Protection Solutions, LLC (WRPS). These results are part of a screening test that investigates three grout formulations proposed for wide-range treatment of different waste stream compositions expected for the Hanford Effluent Management Facility (EMF) evaporator bottom waste. This work supports the technical development need for alternative disposition paths for the EMF evaporator bottom wastes and future direct feed low-activity waste (DFLAW) operations at the Hanford Site. High-priority activities included simulant production, grout formulation, and cementitious wastemore » form qualification testing. The work contained within this report relates to waste form development and testing, and does not directly support the 2017 Integrated Disposal Facility (IDF) performance assessment (PA). However, this work contains valuable information for use in PA maintenance past FY 2017 and future waste form development efforts. The provided results and data should be used by (1) cementitious waste form scientists to further the understanding of cementitious leach behavior of contaminants of concern (COCs), (2) decision makers interested in off-site waste form disposal, and (3) the U.S. Department of Energy, their Hanford Site contractors and stakeholders as they assess the IDF PA program at the Hanford Site. The results reported help fill existing data gaps, support final selection of a cementitious waste form for the EMF evaporator bottom waste, and improve the technical defensibility of long-term waste form risk estimates.« less

Work ability of Dutch employees with rheumatoid arthritis.

PubMed

de Croon, E M; Sluiter, J K; Nijssen, T F; Kammeijer, M; Dijkmans, B A C; Lankhorst, G J; Frings-Dresen, M H W

2005-01-01

To (i) examine the association between fatigue, psychosocial work characteristics (job control, support, participation in decision making, psychological job demands), and physical work requirements on the one hand and work ability of employees with rheumatoid arthritis (RA) on the other, and (ii) determine the advice that health care professionals give to employees with RA on how to maintain their work ability. Data were gathered from 78 employees with early RA (response = 99%) by telephone interviews and self-report questionnaires. Fatigue, lack of autonomy, low coworker/supervisor support, low participation in decision making, and high physical work requirements (i.e. using manual force) predicted low work ability. High psychological job demands, however, did not predict low work ability. The rheumatologist, occupational physician, occupational therapist, physiotherapist, and psychologist gave advice on how to cope with RA at work to 36, 30, 27, 26, and 17% of the employees, respectively. Advice was directed mainly at factors intrinsic to the employee. Employees expressed a positive attitude towards this advice. Fatigue, lack of support, lack of autonomy, lack of participation in decision making, and using manual force at work (e.g. pushing and pulling) threaten the work ability of employees with RA. According to the employees with RA, involvement of health care professionals from different disciplines and the implementation of organizational and technical interventions would help them to tackle these threats.

An Overview of NASA's Program of Future M&S VV&A Outreach and Training Activities

NASA Technical Reports Server (NTRS)

Caine, Lisa; Hale, Joseph P.

2006-01-01

NASA's Exploration Systems Mission Directorate (ESMD) is implementing a management approach for modeling and simulation (M&S) that will provide decision-makers information on the model s fidelity, credibility, and quality. The Integrated Modeling & Simulation Verification, Validation and Accreditation (IM&S W&A) process will allow the decision-maker to understand the risks involved in using a model s results for mission-critical decisions. The W&A Technical Working Group (W&A TWG) has been identified to communicate this process throughout the agency. As the W&A experts, the W&A NVG will be the central resource for support of W&A policy, procedures, training and templates for documentation. This presentation will discuss the W&A Technical Working Group s outreach approach aimed at educating M&S program managers, developers, users and proponents on the W&A process, beginning at MSFC with the CLV program.

Jeanette Scissum-Mickens

NASA Image and Video Library

1964-12-01

Jeanette Scissum joined NASA’s Marshall Space Flight Center in 1964 after earning bachelor's and master's degrees in mathematics from Alabama A&M University. Scissum published a NASA report in 1967, “Survey of Solar Cycle Prediction Models,” which put forward techniques for improved forecasting of the sunspot cycle. In the mid-1970s she worked as a space scientist in the Space Environment Branch of Marshall’s Space Sciences Laboratory and later led activities in Marshall’s Atmospheric, Magnetospheric, and Plasmas in Space project.In 1975, Scissum wrote an article for the National Technical Association, “Equal Employment Opportunity and the Supervisor – A Counselor’s View,” which argued that many discrimination complaints could be avoided “through adequate and meaningful communication.” Scissum later worked at NASA Headquarters as a computer systems analyst responsible for analyzing and directing NASA management information and technical support systems.

Audit Report on "Work for Others Performed by the Department of Energy for the Department of Defense"

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Pursuant to the Atomic Energy Act of 1954, as amended, and the Economy Act of 1932, the Department of Energy and its semi-autonomous National Nuclear Security Administration (NNSA) provide research and technical assistance to other Federal agencies on a reimbursable, full cost recovery basis through the Work for Others (WFO) program. For the vast majority of WFO technical projects, Department Federal officials furnish administrative project oversight while the actual detailed scientific or technical work is completed by the Department's 'management and operating' contractors. These contractors are awarded a special contract type specifically created under the Federal Acquisition Regulation to managemore » and operate Department sites and facilities, including sophisticated laboratories and technical centers, on a government-owned, contractor-operated basis. With annual expenditures exceeding $1 billion, the Department of Defense (DoD) is one of the Department's largest WFO customers. Work performed for DoD at the Department's national laboratories and other facilities includes highly technical research in areas such as nuclear weapons systems, counter-terrorism, and in-theater troop support. The National Defense Authorization Act for Fiscal Year (FY) 2009, required the Inspectors General of the DoD and the Department to review procurement methods to determine whether the Department complied with DoD procurement requirements and/or whether alternative procurement policies were in place. In response, we focused our review on projects performed by NNSA because it completes the vast majority (approximately $900 million in FY 2008) of the Department's work for DoD. As part of this effort, and, at the specific request of the DoD Office of Inspector General (DoD OIG), we identified the universe of WFO technical projects that received new funding in the fourth quarter of FY 2008 at NNSA sites. We independently reviewed a judgmental sample of 11 projects selected by the DoD OIG to meet the objectives of this audit. Our review revealed that NNSA managed DoD WFO technical projects in a manner consistent with requirements of the Atomic Energy Act of 1954, the Federal Acquisition Regulation, and the Department's implementing guidance, the Department of Energy Acquisition Regulation. Because of the very nature of the Department's management and operating contracting model, WFO projects may not be technically compliant with DoD procurement regulations in certain instances. We found that NNSA did not let new contracts or task orders for the DoD WFO technical projects we reviewed and instead managed them under its existing internal control process as part of its management and operating contract structure. In one instance, we noted that the Department had, at DoD's request, supplemented its control structure to incorporate specific DoD procurement requirements. Senior Department of Energy procurement officials acknowledged that neither the Department nor NNSA modified their existing prime contracts to incorporate specific defense procurement requirements because such modifications would be inappropriate, costly, and inefficient. In short, they informed us that the Department had developed and implemented a series of controls designed to monitor overall contractor performance, including WFO technical projects. Department and NNSA officials noted, however, that they were willing to incorporate DoD specific requirements into work orders should DoD request and fund such efforts. Additional details regarding management of WFO technical projects are discussed in the body of this report.« less

HKHC Community Dashboard: design, development, and function of a Web-based performance monitoring system.

PubMed

Bors, Philip A; Kemner, Allison; Fulton, John; Stachecki, Jessica; Brennan, Laura K

2015-01-01

As part of Robert Wood Johnson Foundation's Healthy Kids, Healthy Communities (HKHC) national grant program, a technical assistance team designed the HKHC Community Dashboard, an online progress documentation and networking system. The Dashboard was central to HKHC's multimethod program evaluation and became a communication interface for grantees and technical assistance providers. The Dashboard was designed through an iterative process of identifying needs and priorities; designing the user experience, technical development, and usability testing; and applying visual design. The system was created with an open-source content management system and support for building an online community of users. The site developer trained technical assistance providers at the national program office and evaluators, who subsequently trained all 49 grantees. Evaluators provided support for Dashboard users and populated the site with the bulk of its uploaded tools and resource documents. The system tracked progress through an interactive work plan template, regular documentation by local staff and partners, and data coding and analysis by the evaluation team. Other features included the ability to broadcast information to Dashboard users via e-mail, event calendars, discussion forums, private messaging, a resource clearinghouse, a technical assistance diary, and real-time progress reports. The average number of Dashboard posts was 694 per grantee during the grant period. Technical assistance providers and grantees uploaded a total of 1304 resource documents. The Dashboard functions with the highest grantee satisfaction were its interfaces for sharing and progress documentation. A majority of Dashboard users (69%) indicated a preference for continued access to the Dashboard's uploaded resource documents. The Dashboard was a useful and innovative tool for participatory evaluation of a large national grant program. While progress documentation added some burden to local project staff, the system proved to be a useful resource-sharing technology.

EOS Laser Atmosphere Wind Sounder (LAWS) investigation

NASA Technical Reports Server (NTRS)

Emmitt, George D.

1991-01-01

The related activities of the contract are outlined for the first year. These include: (1) attend team member meetings; (2) support EOS Project with science related activities; (3) prepare and Execution Phase plan; and (4) support LAWS and EOSDIS related work. Attached to the report is an appendix, 'LAWS Algorithm Development and Evaluation Laboratory (LADEL)'. Also attached is a copy of a proposal to the NASA EOS for 'LAWS Sampling Strategies and Wind Computation Algorithms -- Storm-Top Divergence Studies. Volume I: Investigation and Technical Plan, Data Plan, Computer Facilities Plan, Management Plan.'

Hydrologic Resources Management Program and Underground Tests Area Project FY 2003 Progress Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

J., B C; F., E G; K., E B

This report describes FY 2003 technical studies conducted by the Chemical Biology and Nuclear Science Division (CBND) at Lawrence Livermore National Laboratory (LLNL) in support of the Hydrologic Resources Management Program (HRMP) and the Underground Test Area (UGTA) Project. These programs are administered by the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) through the Defense Programs and Environmental Restoration Divisions, respectively. HRMP-sponsored work is directed toward the responsible management of the natural resources at the Nevada Test Site (NTS), enabling its continued use as a staging area for strategic operations in support of national security.more » UGTA-funded work emphasizes the development of an integrated set of groundwater flow and contaminant transport models to predict the extent of radionuclide migration from underground nuclear testing areas at the NTS. The present report is organized on a topical basis and contains five chapters that reflect the range of technical work performed by LLNL-CBND during FY 2003. Although we have emphasized investigations that were led by CBND, we also participated in a variety of collaborative studies with other UGTA and HRMP contract organizations including the Energy and Environment Directorate at LLNL (LLNL-E&E), Los Alamos National Laboratory (LANL), the Desert Research Institute (DRI), the U.S. Geological Survey (USGS), Stoller-Navarro Joint Venture (SNJV), and Bechtel Nevada (BN).« less

Programming Makes Software; Support Makes Users

NASA Astrophysics Data System (ADS)

Batcheller, A. L.

2010-12-01

Skilled software engineers may build fantastic software for climate modeling, yet fail to achieve their project’s objectives. Software support and related activities are just as critical as writing software. This study followed three different software projects in the climate sciences, using interviews, observation, and document analysis to examine the value added by support work. Supporting the project and interacting with users was a key task for software developers, who often spent 50% of their time on it. Such support work most often involved replying to questions on an email list, but also included talking to users on teleconference calls and in person. Software support increased adoption by building the software’s reputation and showing individuals how the software can meet their needs. In the process of providing support, developers often learned new of requirements as users reported features they desire and bugs they found. As software matures and gains widespread use, support work often increases. In fact, such increases can be one signal that the software has achieved broad acceptance. Maturing projects also find demand for instructional classes, online tutorials and detailed examples of how to use the software. The importance of support highlights the fact that building software systems involves both social and technical aspects. Yes, we need to build the software, but we also need to “build” the users and practices that can take advantage of it.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The purpose of this report is to summarize the activities of the Analytical Chemistry Laboratory (ACL) at Argonne National Laboratory (ANL) for Fiscal Year (FY) 1993 (October 1992 through September 1993). This annual report is the tenth for the ACL and describes continuing effort on projects, work on new projects, and contributions of the ACL staff to various programs at ANL. The Analytical Chemistry Laboratory is a full-cost-recovery service center, with the primary mission of providing a broad range of analytical chemistry support services to the scientific and engineering programs at ANL. The ACL also has research programs in analyticalmore » chemistry, conducts instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL handles a wide range of analytical problems. Some routine or standard analyses are done, but it is common for the Argonne programs to generate unique problems that require development or modification of methods and adaption of techniques to obtain useful analytical data. The ACL is administratively within the Chemical Technology Division (CMT), its principal ANL client, but provides technical support for many of the technical divisions and programs at ANL. The ACL has four technical groups--Chemical Analysis, Instrumental Analysis, Organic Analysis, and Environmental Analysis--which together include about 45 technical staff members. Talents and interests of staff members cross the group lines, as do many projects within the ACL.« less

Earth applications of closed ecological systems: Relevance to the development of sustainability in our global biosphere

NASA Astrophysics Data System (ADS)

Nelson, M.; Allen, J.; Ailing, A.; Dempster, W. F.; Silverstone, S.

The parallels between the challenges facing bioregenerative life support in artificial closed ecological systems and those in our global biosphere are striking. At the scale of the current global technosphere and expanding human population, it is increasingly obvious that the biosphere can no longer safely buffer and absorb technogenic and anthropogenic pollutants. The loss of biodiversity, reliance on non-renewable natural resources, and conversion of once wild ecosystems for human use with attendant desertification/soil erosion, has led to a shift of consciousness and the widespread call for sustainability of human activities. For researchers working on bioregenerative life support in closed systems, the small volumes and faster cycling times than in the Earth's biosphere make it starkly clear that systems must be designed to ensure renewal of water and atmosphere, nutrient recycling, production of healthy food, and safe environmental methods of maintaining technical systems. The development of technical systems that can be fully integrated and supportive of living systems is a harbinger of new perspectives as well as technologies in the global environment. In addition, closed system bioregenerative life support offers opportunities for public education and consciousness changing of how to live with our global biosphere.

Piloting a Collaborative Web-Based System for Testing ICD-11.

PubMed

Donada, Marc; Kostanjsek, Nenad; Della Mea, Vincenzo; Celik, Can; Jakob, Robert

2017-01-01

The 11^th revision of the International Classification of Diseases (ICD-11), for the first time in ICD history, deployed web-based collaboration of experts and ICT tools. To ensure that ICD-11 is working well, it needs to be systematically field tested in different settings, across the world. This will be done by means of a number of experiments. In order to support its implementation, a web-based system (ICDfit) has been designed and developed. The present paper illustrates the current prototype of the system and its technical testing. the system has been designed according to WHO requirements, and implemented using PHP and MySQL. Then, a preliminary technical test has been designed and run in January 2016, involving 8 users. They had to carry out double coding, that is, coding case summaries with both ICD-10 and ICD-11, and answering quick questions on the coding difficulty. the 8 users coded 632 cases each, spending an average of 163 seconds per case. While we found an issue in the mechanism used to record coding times, no further issues were found. the proposed system seems to be technically adequate for supporting future ICD-11 testing.

Laboratory Directed Research and Development Program FY98

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hansen, T.; Chartock, M.

1999-02-05

The Ernest Orlando Lawrence Berkeley National Laboratory (LBNL or Berkeley Lab) Laboratory Directed Research and Development Program FY 1998 report is compiled from annual reports submitted by principal investigators following the close of the fiscal year. This report describes the supported projects and summarizes their accomplishments. It constitutes a part of the Laboratory Directed Research and Development (LDRD) program planning and documentation process that includes an annual planning cycle, projection selection, implementation, and review. The LBNL LDRD program is a critical tool for directing the Laboratory's forefront scientific research capabilities toward vital, excellent, and emerging scientific challenges. The program providesmore » the resources for LBNL scientists to make rapid and significant contributions to critical national science and technology problems. The LDRD program also advances LBNL's core competencies, foundations, and scientific capability, and permits exploration of exciting new opportunities. All projects are work in forefront areas of science and technology. Areas eligible for support include the following: Advanced study of hypotheses, concepts, or innovative approaches to scientific or technical problems; Experiments and analyses directed toward ''proof of principle'' or early determination of the utility of new scientific ideas, technical concepts, or devices; and Conception and preliminary technical analyses of experimental facilities or devices.« less

Supported employment for persons with serious mental illness: current status and future directions.

PubMed

Mueser, K T; McGurk, S R

2014-06-01

The individual placement and supported (IPS) model of supported employment is the most empirically validated model of vocational rehabilitation for persons with schizophrenia or another serious mental illness. Over 18 randomized controlled trials have been conducted throughout the world demonstrating the effectiveness of supported employment at improving competitive work compared to other vocational programs: IPS supported employment is defined by the following principles: 1) inclusion of all clients who want to work; 2) integration of vocational and clinical services; 3) focus on competitive employment; 4) rapid job search and no required prevocational skills training; 5) job development by the employment specialist; 6) attention to client preferences about desired work and disclosure of mental illness to prospective employers; 7) benefits counseling; and 8) follow-along supports after a job is obtained. Supported employment has been successfully implemented in a wide range of cultural and clinical populations, although challenges to implementation are also encountered. Common challenges are related to problems such as the failure to access technical assistance, system issues, negative beliefs and attitudes of providers, funding restrictions, and poor leadership. These challenges can be overcome by tapping expertise in IPS supported employment, including standardized and tested models of training and consultation. Efforts are underway to increase the efficiency of training methods for supported employment and the overall program, and to improve its effectiveness for those clients who do not benefit. Progress in IPS supported employment offers people with a serious mental illness realistic hope for achieving their work goals, and taking greater control over their lives. Copyright © 2014. Published by Elsevier Masson SAS.

Independent technical support for the frozen soil barrier installation and operation at the Fukushima Daiichi Nuclear Power Station (F1 Site)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Looney, Brian B.; Jackson, Dennis G.; Truex, Michael J.

TEPCO is implementing a number of water countermeasures to limit the releases and impacts of contaminated water to the surrounding environment. The diverse countermeasures work together in an integrated manner to provide different types, and several levels, of protection. In general, the strategy represents a comprehensive example of a “defense in depth” concept that is used for nuclear facilities around the world. One of the key countermeasures is a frozen soil barrier encircling the damaged reactor facilities. The frozen barrier is intended to limit the flow of water into the area and provide TEPCO the ability to reduce the amountmore » of contaminated water that requires treatment and storage. The National Laboratory team supports the selection of artificial ground freezing and the incorporation of the frozen soil barrier in the contaminated water countermeasures -- the technical characteristics of a frozen barrier are relatively well suited to the Fukushima-specific conditions and the need for inflow reduction. Further, our independent review generally supports the TEPCO/Kajima design, installation strategy and operation plan.« less

Summary of Session Activities: Coordination of Environmental Education Projects

NASA Technical Reports Server (NTRS)

Keeler, Michael; Mahootian, Farzad

1995-01-01

In this session, we address four fundamental questions related to environmental fields with emphasis on education. These are: What are the goals, objectives, and practical opportunities for coordinating our projects? How can we improve awareness of, interest in, access to, and support the products of our work? How can we build relationships between projects for scientific, educational, technical, and programmatic benefit? How can we evaluate the effectiveness of coordination efforts. In this working session, we produced answers to these questions and proposed a structure for future collaboration.

Agency Agreements Process Champion Support Intern

NASA Technical Reports Server (NTRS)

Miksa, Ember

2018-01-01

This document will provide information on the 2018 Spring semester NIFS Intern who represented the Office of Chief Financial Officer (OCFO) as a Reimbursable Accountant at Kennedy Space Center (KSC). This intern supported the Agency Agreements Process Champions and Team Lead, Susan Kroskey, Sandy Massey and Mecca Murphy, with major initiatives to advance the KSC OCFO's vision of creating and innovating healthy financial management practices that maximize the value of resources entrusted to NASA. These initiatives include, but are not limited to: updating the Agency Guidance and NASA Procedural Guidance 9090.1 Agreements, implementing a new budget structure to be utilized across all centers, submitting a Call Request (CRQ) to enhance non-federal customer reporting, initiating a discussion to incorporate a 3-year funding program for NASA agreements, and undertaking the Office of Inspector General (OIG) Audit. In support of these initiatives, this intern identified technical methods to enhance and reduce the workload of financial processes for reimbursable and non-reimbursable agreements, prepared reports in support of accounting functions, and performed administrative work and miscellaneous technical tasks in support of the OCFO as requested. In conclusion of the internship, the intern will become knowledgeable on reimbursable accounting, reimbursable policy, types of reimbursable agreements, the agreements process, estimated pricing reports, and the roles and responsibilities of the Financial Accounting and Financial Services offices.

Engineering Technical Support Center (ETSC)

EPA Pesticide Factsheets

ETSC is EPA’s technical support and resource centers responsible for providing specialized scientific and engineering support to decision-makers in the Agency’s ten regional offices, states, communities, and local businesses.

Technical support and delegation to practice staff - status quo and (possible) future perspectives for primary health care in Germany.

PubMed

Urban, Elisabeth; Ose, Dominik; Joos, Stefanie; Szecsenyi, Joachim; Miksch, Antje

2012-08-01

Primary health care in industrialized countries faces major challenges due to demographic changes, an increasing prevalence of chronic diseases and a shortage of primary care physicians. One approach to counteract these developments might be to reduce primary care physicians' workload supported by the use of health information technology (HIT) and non-physician practice staff. In 2009, the U.S. Commonwealth Fund (CWF) conducted an international survey of primary care physicians which the present secondary descriptive analysis is based on. The aim of this analysis was twofold: First, to explore to what extend German primary care physicians already get support by HIT and non-physician practice staff, and second, to show possible future perspectives. The CWF questionnaire was sent to a representative random sample of 1,500 primary care physicians all over Germany. The data was descriptively analyzed. Group comparisons regarding differences in gender and age groups were made by means of Chi Square Tests for categorical variables. An alpha-level of p < 0.05 was used for statistical significance. Altogether 715 primary care physicians answered the questionnaire (response rate 49%). Seventy percent of the physicians use electronic medical records. Technical features such as electronic ordering and access to laboratory parameters are mainly used. However, the majority does not routinely use technical functions for drug prescribing, reminder-systems for guideline-based interventions or recall of patients. Six percent of surveyed physicians are able to transfer prescriptions electronically to a pharmacy, 1% use email communication with patients regularly. Seventy-two percent of primary care physicians get support by non-physician practice staff in patient care, mostly in administrative tasks or routine preventive services. One fourth of physicians is supported in telephone calls to the patient or in patient education and counseling. Within this sample the majority of primary care physicians get support by HIT and non-physician practice staff in their daily work. However, the potential has not yet been fully used. Supportive technical functions like electronic alarm functions for medication or electronic prescribing should be improved technically and more adapted to physicians' needs. To warrant pro-active health care, recall and reminder systems should get refined to encourage their use. Adequately qualified non-physician practice staff could play a more active role in patient care. Reimbursement should not only be linked to doctors', but also to non-physician practice staff services.

Collaboration across organizational boarders, the referral case.

PubMed

Heimly, Vigdis

2010-01-01

Referrals are requests for medical examination and evaluation by a specialist, outpatient clinic or a hospital. The referral can be sent from a GP, specialist or from one hospital to another. The referral transfers fully or partly the responsibility for further treatment of the patient. The diffusion of electronic referrals in the health sector has been slow in many countries despite the fact that EHR-systems, referral standards and technical infrastructure are available. This paper addresses shortcomings that have been seen in the Norwegian deployment process, and how collaboration can support, and be supported by, the involved actors in different organizations. Special attention is paid to how GPs that work in part time positions as practice consultants in Hospitals can act as boundary spanners in order to improve the collaborating actors understanding of each other's needs and work processes. Practice consultant should also be used actively in design of ICT-systems that support collaboration across organizational boarders in health care.

Iranian nurses' experience of essential technical competences in disaster response: A qualitative content analysis study.

PubMed

Aliakbari, Fatemeh; Bahrami, Masoud; Aein, Fereshteh; Khankeh, Hamidreza

2014-11-01

Today disasters are a part of many people's lives. Iran has a long history of disaster events and nurses are one of the most significant groups within the Iranian disaster relief operations, providing immediate and long-term care for those affected by the disaster. However, the technical competence of Iranian nurses and their training for this work has received little attention. This article presents the results of a study that aims to explore this context. A qualitative study was conducted using in-depth interviews to collect data from 30 nurses, who were deliberately selected from the health centers affiliated to the Isfahan University of Medical Sciences. Themes were identified using the conventional qualitative content analysis. The trustworthiness of the study was supported by considering the auditability, neutrality, consistency, and transferability. The study lasted from 2011 to 2012. Data analysis undertaken for the qualitative study resulted in the identification of five main themes, which included: (1) Management competences, (2) ethical and legal competences, (3) team working, and (4) personal abilities and the specific technical competences presented in this report. This report presents an overview of the nursing technical capabilities required for Iranian nurses during disaster relief. It is argued that additional competencies are required for nurses who care in high-risk situations, including disasters. Nurses need to prepare themselves more effectively to be responsible and effective in nursing care.

Overlapping of duties and technical autonomy among nurses of the Family Health Strategy.

PubMed

Feliciano, Katia Virginia de Oliveira; Kovacs, Maria Helena; Sarinho, Silvia Wanick

2010-06-01

To understand how Estratégia Saúde da Família (Family Health Strategy) nurses experience the overlapping of duties and building of technical autonomy. This was a qualitative study performed with 22 nurses, in the city of Recife, Northeastern Brazil, between August 2005 and November 2006. Based on management evaluation (geographic access; conflicts in the team, between team and district and between team and community; and public violence in the area), four teams were selected in each of the six health districts. Semi-structured interviews were conducted. The main themes in the interview guide were about work expectations and relevance, its organization and process, and feelings towards these practices. The results were interpreted under the perspective of burnout. The nurses' opinion on the excessive number of families, insufficient organizational support and pressures from user demands that had not been met was recurrent. Overlapping of health care and management caused work overload, creating anxiety, impotence, frustration and the feeling of being treated unfairly when tasks were divided among team members. The clinical dimension of practice led to a feeling of insecurity of a technical and ethical nature, in addition to the satisfaction for the power and prestige achieved by the professional category. Specialized medical training represented an obstacle to autonomy and responsibility becoming interdependent. Stress, dissatisfaction, becoming physically and mentally ill, recognition of the relevance of work and importance of one's performance, and low work involvement were reported. In view of the lack of expectation of changes in the short term, the overlapping of low professional satisfaction and work overload causes negative attitudes, indicating the importance of health promotion to increase the possibility of influencing and changing work conditions.

Brownfield to Brightfield Initiative in Oak Ridge, TN - 12346

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hough, Gil; Fairless, Chad

Experience characterizing, permitting, and restoring 'Brownfield' sites-government or industrial sites with restricted future use due to the presence or potential presence of hazardous substances, pollutants, or contaminants-is being leveraged to identify opportunities for redevelopment into solar power generating facilities which, in this context, are called 'Brightfields'. Brownfield sites offer the expansive land necessary for large photovoltaic (PV) solar farms, but require an in-depth working knowledge of complicated regulatory restrictions and environmental constraints to develop them. As a part of the effort to identify opportunities for redevelopment of Brownfield sites for solar applications, a technical guide, was composed specifically for themore » development of solar generation on restricted use sites. The basis of the technical guide gives specific consideration to environmental requirements and installation methods breaking that into three areas for assessing: 1) levels of contamination, 2) ground penetration requirements, and 3) the requirements for aesthetics and maintenance. Brightfield projects are underway to support the technical guide and expand re-industrialization efforts for the former DOE Gaseous Diffusion Plant in Oak Ridge, TN. There are exciting opportunities to turn Brownfields into Brightfield solar energy solutions for meeting the future renewable energy needs of our country. Brownfields that offer the large surface area required for solar PV farms coupled with the technical guide for the installation of solar farms on restricted use sites supports efforts to develop the solar capacities and expertise to tap this future market. The initial projects designed following the technical guide will provide verification of the installation requirements and beneficial reuse of restricted use sites. (authors)« less

U.S. ENVIRONMENTAL PROTECTION AGENCY RESEARCH AND TECHNICAL SUPPORT NEEDS RELATED TO CONCEPTUAL MODEL DEVELOPMENT FOR SUBSURFACE REACTIVE TRANSPORT MODELING OF INORGANIC CONTAMINANTS, RADIONUCLIDES, AND NUTRIENTS

EPA Science Inventory

EPA's Office of Research and Development is responsible to EPA's Office of Solid Waste to provide research and technical support for waste site closures and the development of technical guidance in support of environmental regulations and programmatic policies. ORD is also respo...

Scientific and Technical Development of the Next Generation Space Telescope

NASA Technical Reports Server (NTRS)

Burg, Richard

2003-01-01

The Next Generation Space Telescope (NGST) is part of the Origins program and is the key mission to discover the origins of galaxies in the Universe. It is essential that scientific requirements be translated into technical specifications at the beginning of the program and that there is technical participation by astronomers in the design and modeling of the observatory. During the active time period of this grant, the PI participated in the NGST program at GSFC by participating in the development of the Design Reference Mission, the development of the full end-to-end model of the observatory, the design trade-off based on the modeling, the Science Instrument Module definition and modeling, the study of proto-mission and test-bed development, and by participating in meetings including quarterly reviews and support of the NGST SWG. This work was documented in a series of NGST Monographs that are available on the NGST web site.

Towards Development of Robotic Aid for Rehabilitation of Locomotion-Impaired Subjects

NASA Technical Reports Server (NTRS)

Bejczy, Antal K.

2000-01-01

Manual assistance of therapists to help movement of legs of spinal cord injured (SCI) subjects during stepping on a treadmill for locomotion rehabilitation has severe economic and technical limitations. Scientists at the Department of Physiological Science at the University of California Los Angeles (UCLA) and roboticists at the Jet Propulsion Laboratory (JPL) initiated a joint effort to develop a robotic mechanism capable of performing controlled motions equivalent to the arm and hand motions of therapists assisting the stepping of locomotion impaired subjects on a treadmill, while the subjects' body weight is partially supported by an overhead harness. A first necessary technical step towards this development is to measure and understand the kinematics and dynamics of the therapists' arm and hand motions as they are reflected on the subjects' leg movement. This paper describes an initial measurement system developed for this purpose together with the related measurement results, and outlines the planned future technical work.

The MetSkill Program — Rapidly Developing Effective Young Engineers in the Workplace

NASA Astrophysics Data System (ADS)

Drinkwater, Diana; Bianco, Nina

MetSkill is a professional development program for metallurgical engineers that integrates with normal duties in their first one or two years of service. Graduates work together on a structured technical project, facilitated by specialists and supported by formal learning, and ultimately reported to their technical managers. The program enables graduates to "fill the gaps" in their undergraduate education, which is increasingly pertinent as engineering degrees become more general. Participants report that they enjoy the focus on more challenging (rewarding) aspects of their jobs and feel more confident about problem solving. Sponsor companies add that the relationships developed with external technical specialists enhances opportunities for innovation and development. MetSkill was delivered to two major resource companies in Australia in 2012. This paper provides an outline of the program and the reasons for its success, and demonstrates how the learning model could be applied to groups of graduates in other engineering disciplines.

Longitudinal Surveys of Australian Youth (LSAY) 2003 Cohort: Wave 9 (2011)--Frequency Tables. Technical Report 76B

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2012

2012-01-01

The Longitudinal Surveys of Australian Youth (LSAY) program studies the progress of several groups of young Australians as they move from school into post-secondary education and work. This series of documents provides supporting information for the LSAY data set of the 2003 cohort at wave 9 (2011). This document presents the frequency tables for…

Longitudinal Surveys of Australian Youth (LSAY) 2006 Cohort: Wave 6 (2011)--Frequency Tables. Technical Report 75B

ERIC Educational Resources Information Center

National Centre for Vocational Education Research (NCVER), 2012

2012-01-01

The Longitudinal Surveys of Australian Youth (LSAY) program studies the progress of several groups of young Australians as they move from school into post-secondary education and work. This series of documents provides supporting information for the LSAY data set of the 2006 cohort at wave 6 (2011). This document presents the frequency tables for…

Multistep Methods for Integrating the Solar System

DTIC Science & Technology

1988-07-01

Technical Report 1055 [Multistep Methods for Integrating the Solar System 0 Panayotis A. Skordos’ MIT Artificial Intelligence Laboratory DTIC S D g8...RMA ELEENT. PROECT. TASK Artific ial Inteligence Laboratory ARE1A G WORK UNIT NUMBERS 545 Technology Square Cambridge, MA 02139 IL. CONTROLLING...describes research done at the Artificial Intelligence Laboratory of the Massachusetts Institute of Technology, supported by the Advanced Research Projects

Building Evidence: What Comes after an Efficacy Study? Technical Working Group Meeting. Meeting Summary (Washington, DC, October 14, 2016)

ERIC Educational Resources Information Center

Institute of Education Sciences, 2016

2016-01-01

On October 14, 2016, the National Center for Special Education Research (NCSER) and the National Center for Education Research (NCER) in the Institute of Education Sciences (IES) convened a group of experts to gain insights and advice on how best to support the advancement of evidence beyond an efficacy study. Discussion followed five topics of…

Research and Technology, 1994

NASA Technical Reports Server (NTRS)

1995-01-01

This report selectively summarizes the NASA Lewis Research Center's research and technology accomplishments for the fiscal year 1994. It comprises approximately 200 short articles submitted by the staff members of the technical directorates. The report is organized into six major sections: Aeronautics, Aerospace Technology, Space Flight Systems, Engineering and Computational Support, Lewis Research Academy, and Technology Transfer. A table of contents and author index have been developed to assist the reader in finding articles of special interest. This report is not intended to be a comprehensive summary of all research and technology work done over the past fiscal year. Most of the work is reported in Lewis-published technical reports, journal articles, and presentations prepared by Lewis staff members and contractors. In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report a Lewis contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible.

Case Study of 'Engineering Peer Meetings' in JPL's ST-6 Project

NASA Technical Reports Server (NTRS)

Chao, Lawrence P.; Tumer, Irem

2004-01-01

This design process error-proofing case study describes a design review practice implemented by a project manager at NASA Jet Propulsion Laboratory. There are many types of reviews at NASA: required and not, formalized and informal, programmatic and technical. Standing project formal reviews such as the Preliminary Design Review (PDR) and Critical Design Review (CDR) are a required part of every project and mission development. However, the engineering peer reviews that support teams technical work on such projects are often informal, ad hoc, and inconsistent across the organization. This case study discusses issues and innovations identified by a project manager at JPL and implemented in 'engineering peer meetings' for his group.

Case Study of "Engineering Peer Meetings" in JPL's ST-6 Project

NASA Technical Reports Server (NTRS)

Tumer, Irem Y.; Chao, Lawrence P.

2003-01-01

This design process error-proofing case study describes a design review practice implemented by a project manager at NASA Jet Propulsion Laboratory. There are many types of reviews at NASA: required and not, formalized and informal, programmatic and technical. Standing project formal reviews such as the Preliminary Design Review (PDR) and Critical Design Review (CDR) are a required part of every project and mission development. However, the engineering peer reviews that support teams technical work on such projects are often informal, ad hoc, and inconsistent across the organization. This case study discusses issues and innovations identified by a project manager at JPL and implemented in "engineering peer meetings" for his group.

Engaging Students and Scientists through ROV Competitions

NASA Astrophysics Data System (ADS)

Zande, J.

2004-12-01

The Marine Advanced Technology Education (MATE) Center's network of regional and national remotely operated vehicle (ROV) competitions for students provide a unique and exciting way for the scientific community to get involved in education and outreach and meet broader impact requirements. From Hawaii to New England, MATE's ROV competitions also facilitate collaborations among the scientific community, professional societies, government agencies, business and industry, and public aquaria. Since 2001, the MATE Center and organizations such as the Marine Technology Society (MTS), NOAA's Office of Ocean Exploration, and the Birch Aquarium at Scripps Institution of Oceanography, among others, have challenged 1,000+ students to design and build ROVs for underwater tasks based on science and exploration missions taking place in the real world. From the Monterey Bay Aquarium Research Institute to Woods Hole Oceanographic Institution (WHOI), more than 60 scientists, engineers, and their organizations have supported the students participating in these events and, in doing so, have contributed to E&O and increased the awareness and impact of their work. What does it take to get involved with this E&O effort? That depends on the time, technical expertise, facilities, equipment, building materials, and/or funds that you can afford to contribute. Examples of how scientists and their institutions have and continue to support MATE's ROV competitions include: -Serving as technical advisors, judges, and competition-day technical assistants. -Sharing time and technical expertise as mentors. -Providing access to facilities and equipment. -Donating building materials and supplies. -Hosting the event at your institution. In addition to helping you to become involved in E&O and meet broader impact requirements, benefits to you include: -Exposing yourself to technologies that could support your science. -Getting ideas for creative and inexpensive solutions to challenges that you may face while doing your work. -Recruiting students to your institution. -Heightening your and your institution's visibility within the scientific community -Building a positive image within your own local community. -Networking with other scientists and research and academic institutions as well as professional societies, industry, government, and other organizations such as aquaria. Whether or not you use ROVs to support your work is not important. What is important are the knowledge and skills that you do use to accomplish your research goals. In the case of the competition, ROVs are the vehicle to teach concepts such as physics, oceanography, math, science, and engineering - the same concepts that you understand and apply when doing your science. By sharing your time and expertise, you can help students solidify what they are learning as they design and build their ROVs and make the connection to how it can be applied to other disciplines.

Technical Assistance and Program Support; DOD Historical Black Colleges and Universities and Minority Institutions Program.

DTIC Science & Technology

2000-04-01

AD Award Number: DAMD17-98-2-8012 TITLE: Technical Assistance and Program Support; DOD Historical Black Colleges and Universities and Minority...2000 3. REPORT TYPE AND DATES COVERED Annual (1 May 99 - 30 Apr 00): 4. TITLE AND SUBTITLE Technical Assistance and Program Support; DOD...UNCF’s Infrastructure Development Assistance Program (IDAP) has been involved myriad of tasks to support the Department of Defense’s interest to

77 FR 40026 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-06

... and contractor logistics, Quality Assurance Team support services, engineering and technical support..., engineering and technical support, and other related elements of program support. The estimated cost is $49..., maintenance, or training is Confidential. Reverse engineering could reveal Confidential information...

Simulation of Hawaiian Electric Companies Feeder Operations with Advanced Inverters and Analysis of Annual Photovoltaic Energy Curtailment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giraldez Miner, Julieta I.; Nagarajan, Adarsh; Gotseff, Peter

The Hawaiian Electric Companies achieved a consolidated Renewable Portfolio Standard (RPS) of approximately 26% at the end of 2016. This significant RPS performance was achieved using various renewable energy sources - biomass, geothermal, solar photovoltaic (PV) systems, hydro, wind, and biofuels - and customer-sited, grid-connected technologies (primarily private rooftop solar PV systems). The Hawaiian Electric Companies are preparing grid-modernization plans for the island grids. The plans outline specific near-term actions to accelerate the achievement of Hawai'i's 100% RPS by 2045. A key element of the Companies' grid-modernization strategy is to utilize new technologies - including storage and PV systems withmore » grid-supportive inverters - that will help to more than triple the amount of private rooftop solar PV systems. The Hawaiian Electric Companies collaborated with the Smart Inverter Technical Working Group Hawai'i (SITWG) to partner with the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) to research the implementation of advanced inverter grid support functions (GSF). Together with the technical guidance from the Companies's planning engineers and stakeholder input from the SITWG members, NREL proposed a scope of work that explored different modes of voltage-regulation GSF to better understand the trade-offs of the grid benefits and curtailment impacts from the activation of selected advanced inverter grid support functions. The simulation results presented in this report examine the effectiveness in regulating voltage as well as the impact to the utility and the customers of various inverter-based grid support functions on two Hawaiian Electric distribution substations.« less

The National Technical Association: A Hallmark for Access and Success

NASA Astrophysics Data System (ADS)

Jearld, A., Jr.

2017-12-01

Minority Technical Organizations (MTO) are under-utilized as a valuable resource that can help develop the next generation of scientists and engineers. For over 90 years, the National Technical Association (NTA) (www.ntaonline.org) has been the premiere technical association for scientists, engineers, architects, technologist, educators, and technical business entrepreneurs for people of color, offering professional development, mentoring and awards recognition to technical professionals. NTA and its partners are developing a diverse workforce by emphasizing enhanced access opportunities to skills development for youth among underrepresented STEM populations. Established in 1925 by Charles Summer Duke, the first African American to receive an engineering degree from Harvard University, NTA served as the model organization for more than 40 other minority technical organizations that began forming in the 1970's. NTA has served as consultants to the US government on the status of African Americans in science and engineering. The first technical organization to establish community based technical mentoring programs targeting minorities, NTA shares information and assists institutions in identifying minority talent. Members developed the first science and engineering curriculum at Historically Black Colleges and Universities (HBCU's), and are working to produce more students with geoscience degrees to ensure greater career placement with increased minority participation in the geosciences. NTA addresses the lack of access, support, and the need for networking through the longest running annual conference for technical practitioners of color. A hallmark of NTA has been access and success through inter-organizational collaborations with communities of scholars, highly experienced professionals and students to discuss the definition of what is successful geoscience education, research, and employment.

Trends and problems in development of the power plants electrical part

NASA Astrophysics Data System (ADS)

Gusev, Yu. P.

2015-03-01

The article discusses some problems relating to development of the electrical part of modern nuclear and thermal power plants, which are stemming from the use of new process and electrical equipment, such as gas turbine units, power converters, and intellectual microprocessor devices in relay protection and automated control systems. It is pointed out that the failure rates of electrical equipment at Russian and foreign power plants tend to increase. The ongoing power plant technical refitting and innovative development processes generate the need to significantly widen the scope of research works on the electrical part of power plants and rendering scientific support to works on putting in use innovative equipment. It is indicated that one of main factors causing the growth of electrical equipment failures is that some of components of this equipment have insufficiently compatible dynamic characteristics. This, in turn may be due to lack or obsolescence of regulatory documents specifying the requirements for design solutions and operation of electric power equipment that incorporates electronic and microprocessor control and protection devices. It is proposed to restore the system of developing new and updating existing departmental regulatory technical documents that existed in the 1970s, one of the fundamental principles of which was placing long-term responsibility on higher schools and leading design institutions for rendering scientific-technical support to innovative development of components and systems forming the electrical part of power plants. This will make it possible to achieve lower failure rates of electrical equipment and to steadily improve the competitiveness of the Russian electric power industry and energy efficiency of generating companies.

48 CFR 2052.215-75 - Proposal presentation and format.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., i.e., competitive vs. noncompetitive, and the cost evaluation. (c) “Written Technical and Management... * copies. (1) The written Technical and Management Proposal or Oral Presentation and Supporting... objectives of this procurement. (3) The written Technical Proposal or Oral Presentation and Supporting...

Designing clinically useful systems: examples from medicine and dentistry.

PubMed

Koch, S

2003-12-01

Despite promising results in medical informatics research and the development of a large number of different systems, few systems get beyond a prototype state and are really used in practice. Among other factors, the lack of explicit user focus is one main reason. The research projects presented in this paper follow a user-centered system development approach based on extensive work analyses in interdisciplinary working groups, taking into account human cognitive performance. Different medical and health-care specialists, together with researchers in human-computer interaction and medical informatics, specify future clinical work scenarios. Special focus is put on analysis and design of the information and communication flow and on exploration of intuitive visualization and interaction techniques for clinical information. Adequate choice of the technical access device is made depending on the user's work situation. It is the purpose of this paper to apply this method in two different research projects and thereby to show its potential for designing clinically useful systems that do support and not hamper clinical work. These research projects cover IT support for chairside work in dentistry (http://www.dis.uu.se/mdi/research/projects/orquest) and ICT support for home health care of elderly citizens (http://www.medsci.uu.se/mie/project/closecare).

2005 v4.2 Technical Support Document

EPA Pesticide Factsheets

Technical Support Document for the Final Transport Rule describes how updated 2005 NEI, version 2 emissions and were processed for air quality modeling in support of the Cross-state Air Pollution Rule (CSAPR).

Performance Assessment Assistance Activities in the DOE Complex - 12325

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seitz, Roger R.; Phifer, Mark A.; Letourneau, Martin J.

The United States Department of Energy Office of Environmental Management (DOE-EM) has established a Performance Assessment Community of Practice (PA CoP) to foster the sharing of information among performance assessment (PA) and risk assessment practitioners, regulators and oversight personnel. The general intent is to contribute to continuous improvement in the consistency, technical adequacy and quality of implementation of PAs and risk assessments around the DOE Complex. The PA CoP activities have involved commercial disposal facilities and international participants to provide a global perspective. The PA CoP has also sponsored annual technical exchanges as a means to foster improved communication andmore » to share lessons learned from on-going modelling activities. The PA CoP encourages activities to provide programmatic and technical assistance in the form of sharing experience and lessons learned with practitioners during the development of PAs and risk assessments. This assistance complements DOE-EM reviews through the Low-Level Waste Disposal Facility Federal Review Group (LFRG) that are conducted after modelling efforts are completed. Such up-front assistance is providing additional value in terms of improving consistency and sharing of information. There has been a substantial increase in the amount of assistance being provided. The assistance has been well received by practitioners and regulators that have been involved. The paper highlights assistance and sharing of information that has been conducted in the last two years to support activities underway in support of proposed disposal facilities at Paducah, Portsmouth, and the Idaho National Laboratory and tank closure at Hanford. DOE-EM established the PA CoP to help improve the consistency and quality of implementation of modelling activities around the DOE Complex. The PA CoP has sponsored annual technical exchanges as a means to foster improved communication and to share lessons learned from ongoing modelling activities. Practitioners; project managers; oversight personnel; and regulators from United States and international facilities have participated in the three technical exchanges that have been held to date. At the working level, the PA CoP has sponsored technical assistance in support of modelling activities that are currently underway. The assistance concept provides a means to share specific experience, good practices, and lessons learned on topics of interest at a given site while the modelling is being conducted. Such up-front assistance complements the sharing of information that occurs via regular LFRG meetings and independent LFRG reviews that are conducted when the modelling effort is completed. Examples from assistance activities that have been conducted at Idaho, Paducah, Portsmouth and Hanford were highlighted in this paper. There were differences in the types of assistance provided at each site. In some cases the assistance was focused on technical support for the practitioners and management responsible for the development of the PAs. At other sites, the assistance included working with the developers and regulators/stakeholders involved in the process to help with reaching consensus on critical assumptions. Such interactions have proven to be very effective to help all parties get a chance to discuss their perspectives and better understand the different points of view. In all cases, the assistance was used as a means to share broader perspectives, experiences and lessons learned with personnel engaged in a modelling activities at a given site. The combination of technical exchanges and targeted technical assistance has provided additional means to encourage the sharing of information around the DOE Complex and globally. Feedback from practitioners, oversight personnel, regulators and stakeholders that have been involved has been overwhelmingly positive. It is believed that such sharing of information and experiences is contributing to continuous improvement in the consistency, technical adequacy, and quality of modelling activities. Although different approaches are still being used, there is an improvement in the awareness of lessons learned and implementation of practices that have proven to be effective. (authors)« less

Women and handicrafts: myth and reality.

PubMed

Dhamija, J

1981-01-01

Although handicrafts are often advised when income-generating activities are sought for women, "feminine" crafts tend to be time consuming, give poor returns, and offer little opportunity for upgrading skills. Under some conditions handicrafts can be a means of increasing income for women, but several key issues must be considered. Before starting, the existing conditions under which women work, possibilities open to them based on traditional or easily acquired skills, as well as prospects for creating and managing the organization structure needed to support a handicrafts project should be analyzed. Traditional distinctions between women's craft work and men's craft work may need to be overcome. A thorough study of the overall economic situation, the work women already do, available materials, and existing or potential markets should be done, in most cases by experts. Links with traditional markets should be preserved while new markets are sought. Existing institutions which could help in the development of technical training, marketing, and credit should be utilized. A well motivated and competent technical staff and proper management are important elements of a successful project. Caution is necessary in developing handicrafts, because of the danger of exploitation and increae in the burdens already borne by women.

The EVA space suit development in Europe.

PubMed

Skoog, A I

1994-01-01

The progress of the European EVA space suit predevelopment activities has resulted in an improved technical reference concept, which will form the basis for a start of the Phase C/D development work in 1992. Technology development work over the last 2 years has resulted in a considerable amount of test data and a better understanding of the characteristics and behaviour of individual parts of the space suit system, in particular in the areas of suits' mobility and life support functions. This information has enabled a consolidation of certain design features on the one hand, but also led to the challenging of some of the design solutions on the other hand. While working towards an improved situation with respect to the main design drivers mass and cost, the technical concept has been improved with respect to functional safety and ease of handling, taking the evolving Hermes spaceplane requirements into consideration. Necessary hardware and functional redundancies have been implemented taking the operational scenario with Hermes and Columbus servicing into consideration. This paper presents the latest design status of the European EVA space suit concept, with particular emphasis on crew safety, comfort and productivity, in the frame of the predevelopment work for the European Space Agency.

Summary of Current and Future MSFC International Space Station Environmental Control and Life Support System Activities

NASA Technical Reports Server (NTRS)

Ray, Charles D.; Carrasquillo, Robyn L.; Minton-Summers, Silvia

1997-01-01

This paper provides a summary of current work accomplished under technical task agreement (TTA) by the Marshall Space Flight Center (MSFC) regarding the Environmental Control and Life Support System (ECLSS) as well as future planning activities in support of the International Space Station (ISS). Current activities include ECLSS computer model development, component design and development, subsystem integrated system testing, life testing, and government furnished equipment delivered to the ISS program. A long range plan for the MSFC ECLSS test facility is described whereby the current facility would be upgraded to support integrated station ECLSS operations. ECLSS technology development efforts proposed to be performed under the Advanced Engineering Technology Development (AETD) program are also discussed.

Organizational Structures and Processes to Support and Sustain Effective Technical Assistance in a State-Wide Multi-Tiered System of Support Initiative

ERIC Educational Resources Information Center

Morrison, Julie Q.; Russell, Christine; Dyer, Stephanie; Metcalf, Terri; Rahschulte, Rebecca L.

2014-01-01

Despite the national proliferation of technical assistance as a driver for school reform and as a model for embedded and sustained professional development, very little is known about the organizational structures and processes needed to support technical assistance. The purpose of this paper is to describe a structured needs assessment process…

Dominican NGOs move from competition to collaboration.

PubMed

Mahler, H

1995-07-01

In 1992, the seven nongovernmental organizations (NGO) working to prevent HIV/AIDS in the Dominican Republic received most of their funding and technical assistance from the US Agency for International Development (USAID). In September 1992, however, USAID's AIDSTECH project asked the AIDS Control and Prevention (AIDSCAP) Project to prepare the NGOs for the time when USAID would no longer be their main source of support. To that end, AIDSCAP worked with NGO staff to assess their technical, managerial, and administrative needs, and identified a lack of administrative and managerial experience among many NGO staff. AIDSCAP therefore developed an institutional strengthening plan, including a series of capacity building workshops, in 1993. Many NGOs, however, foreseeing the impending need to compete with other NGOs for limited funds, were not interested in sharing ideas and working together. This article describes how Coordinadora de Animacion Socio-Cultural (CASCO) and the Instituto Dominicano de Desarrollo Integral (IDDI) competed in the context of uncertainty over continued donor funding, but now meet regularly to coordinate HIV/AIDS prevention projects for youth in the Dominican Republic.

Minnesota Deaf-Blind Technical Assistance Project. Final Report.

ERIC Educational Resources Information Center

Kloos, Eric

This final report describes activities and accomplishments of the 3-year federally supported Minnesota Deaf-Blind Technical Assistance Project. The project provided training and technical assistance, information sharing, and support services to families of children with deaf-blindness. Activities and accomplishments included: collaboration with…

76 FR 69612 - Amendment to the International Traffic in Arms Regulations: Sudan

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-09

... related technical training and assistance to monitoring, verification, or peace support operations... uses, and related technical training and assistance; (3) personal protective gear for the personal use... technical training and assistance to monitoring, verification, or peace support operations, including those...

75 FR 12740 - Wyoming Interstate Company, Inc.; Notice of Technical Conference

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-17

... additional technical, engineering, and operational support for its proposed gas quality allocation procedures... should be prepared to support its position with adequate technical, engineering, and operational information. FERC conferences are accessible under section 508 of the Rehabilitation Act of 1973. For...

The Role of the Technical Specialist in Disaster Response and Recovery

NASA Astrophysics Data System (ADS)

Curtis, J. C.

2017-12-01

Technical Specialists provide scientific expertise for making operational decisions during natural hazards emergencies. Technical Specialists are important members of any Incident Management Team (IMT) as is described in in the National Incident Management System (NIMS) that has been designed to respond to emergencies. Safety for the responders and the threatened population is the foremost consideration in command decisions and objectives, and the Technical Specialist is on scene and in the command post to support and promote safety while aiding decisions for incident objectives. The Technical Specialist's expertise can also support plans, logistics, and even finance as well as operations. This presentation will provide actual examples of the value of on-scene Technical Specialists, using National Weather Service "Decision Support Meteorologists" and "Incident Meteorologists". These examples will demonstrate the critical role of scientists that are trained in advising and presenting life-critical analysis and forecasts during emergencies. A case will be made for local, state, and/or a national registry of trained and deployment-ready scientists that can support emergency response.

Comprehensive assessment of health education and health promotion in five non-communicable disease demonstration districts in China: a cross-sectional study.

PubMed

Xu, Qiaohua; Huang, Yuelong; Chen, Biyun

2017-12-26

This study aims to develop assessment indicators of health education and promotion for non-communicable disease (NCD) demonstration districts in China and to identify significant factors associated with NCD health education and promotion work. Three complementary techniques were used to conduct this study in Hunan Province, China, between late 2013 and 2015. The Delphi technique was used to develop weighted assessment indicators, followed by the rank sum ratio (RSR) to normalise the weights through rank conversion. Lastly, the technique for order of preference by similarity to ideal solution was conducted to assess five randomly selected NCD demonstration districts representing five different orientations in the province. A total of 24 assessment indicators were constructed covering the following sections: organisational management, fund support, personnel supplies, health education and promotion, people's awareness of NCDs, management and control of patients with NCD, satisfaction with health education and promotion and health literacy of residents. Five districts were selected as samples for evaluation (Furong District, Ziyang District, Shaodong County, Shuangfeng County and Luxi County). Performance varied among the sites, with Furong District greatly surpassing the other sites, especially in fund support, media promotion, technical support for publicity materials, community promotion and supportive environment supplies. The latter four factors were also much greater in the second-ranked Luxi County site than those in the other sites (except Furong District). There were gaps in health education and promotion work in NCD demonstration districts in Hunan Province. The districts that performed better had obvious advantages in fund support, media promotion, technical support, community promotion and supportive environment supplies. Our study provided both a methodological reference and an assessment indicator framework for similar future studies. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Lockheed Martin Skunk Works Single Stage to Orbit/Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

1999-01-01

Lockheed Martin Skunk Works has compiled an Annual Performance Report of the X-33/RLV Program. This report consists of individual reports from all industry team members, as well as NASA team centers. This portion of the report is comprised of a status report of Lockheed Martin's contribution to the program. The following is a summary of the Lockheed Martin Centers involved and work reviewed under their portion of the agreement: (1) Lockheed Martin Skunk Works - Vehicle Development, Operations Development, X-33 and RLV Systems Engineering, Manufacturing, Ground Operations, Reliability, Maintainability/Testability, Supportability, & Special Analysis Team, and X-33 Flight Assurance; (2) Lockheed Martin Technical Operations - Launch Support Systems, Ground Support Equipment, Flight Test Operations, and RLV Operations Development Support; (3) Lockheed Martin Space Operations - TAEM and A/L Guidance and Flight Control Design, Evaluation of Vehicle Configuration, TAEM and A/L Dispersion Analysis, Modeling and Simulations, Frequency Domain Analysis, Verification and Validation Activities, and Ancillary Support; (4) Lockheed Martin Astronautics-Denver - Systems Engineering, X-33 Development; (5) Sanders - A Lockheed Martin Company - Vehicle Health Management Subsystem Progress, GSS Progress; and (6) Lockheed Martin Michoud Space Systems - X-33 Liquid Oxygen (LOX) Tank, Key Challenges, Lessons Learned, X-33/RLV Composite Technology, Reusable Cyrogenic Insulation (RCI) and Vehicle Health Monitoring, Main Propulsion Systems (MPS), Structural Testing, X-33 System Integration and Analysis, and Cyrogenic Systems Operations.

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2012 CFR

2012-10-01

... of the work description. (3) Review and, where required by the contract, approve technical reports... subject to the technical direction of the NRC project officer. The term technical direction is defined to include the following: (1) Technical direction to the contractor which shifts work emphasis between areas...

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of the work description. (3) Review and, where required by the contract, approve technical reports... subject to the technical direction of the NRC project officer. The term technical direction is defined to include the following: (1) Technical direction to the contractor which shifts work emphasis between areas...

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of the work description. (3) Review and, where required by the contract, approve technical reports... subject to the technical direction of the NRC project officer. The term technical direction is defined to include the following: (1) Technical direction to the contractor which shifts work emphasis between areas...

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of the work description. (3) Review and, where required by the contract, approve technical reports... subject to the technical direction of the NRC project officer. The term technical direction is defined to include the following: (1) Technical direction to the contractor which shifts work emphasis between areas...

Gender and ergonomics: a case study on the 'non-formal' work of women nurses.

PubMed

Salerno, Silvana; Livigni, Lucilla; Magrini, Andrea; Talamanca, Irene Figà

2012-01-01

Women's work activities are often characterised by 'non-formal actions' (such as giving support). Gender differences in ergonomics may be due to this peculiarity. We applied the method of organisational congruencies (MOC) to ascertain the 'non-formal' work portion of nurses employed in three hospital units (haematology, emergency room and general medicine) during the three work shifts in a major University Hospital in Rome, Italy. We recorded a total of 802 technical actions performed by nine nurses in 72 h of work. Twenty-six percent of the actions in direct patient's care were communicative actions (mainly giving psychological support) while providing physical care. These 'double actions' are often not considered to be a formal part of the job by hospital management. In our case study, the 'non-formal' work of nurses (psychological support) is mainly represented by double actions while taking physical care of the patients. The dual task paradigm in gender oriented research is discussed in terms of its implications in prevention in occupational health. The main purpose of the study was to assess all the formal and non-formal activities of women in the nursing work setting. Offering psychological support to patients is often not considered to be a formal part of the job. Our case study found that nurses receive no explicit guidelines on this activity and no time is assigned to perform it. In measuring the burden of providing psychological support to patients, we found that this is often done while nurses are performing tasks of physical care for the patients (double actions). The article discusses the significance of non-formal psychological work load of women nurses through double actions from the ergonomic point view.

Model-based reasoning in SSF ECLSS

NASA Technical Reports Server (NTRS)

Miller, J. K.; Williams, George P. W., Jr.

1992-01-01

The interacting processes and reconfigurable subsystems of the Space Station Freedom Environmental Control and Life Support System (ECLSS) present a tremendous technical challenge to Freedom's crew and ground support. ECLSS operation and problem analysis is time-consuming for crew members and difficult for current computerized control, monitoring, and diagnostic software. These challenges can be at least partially mitigated by the use of advanced techniques such as Model-Based Reasoning (MBR). This paper will provide an overview of MBR as it is being applied to Space Station Freedom ECLSS. It will report on work being done to produce intelligent systems to help design, control, monitor, and diagnose Freedom's ECLSS. Specifically, work on predictive monitoring, diagnosability, and diagnosis, with emphasis on the automated diagnosis of the regenerative water recovery and air revitalization processes will be discussed.

State of practice and emerging application of analytical techniques of nuclear forensic analysis: highlights from the 4th Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group (ITWG)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwantes, Jon M.; Marsden, Oliva; Pellegrini, Kristi L.

Founded in 1996 upon the initiative of the “Group of 8” governments (G8), the Nuclear Forensics International Technical Working Group (ITWG) is an ad hoc organization of official nuclear forensics practitioners (scientists, law enforcement, and regulators) that can be called upon to provide technical assistance to the global community in the event of a seizure of nuclear or radiological materials. The ITWG is supported by and is affiliated with roughly 40 countries and international partner organizations including the International Atomic Energy Agency (IAEA), EURATOM, INTERPOL, EUROPOL, and the United Nations Interregional Crime and Justice Research Institute (UNICRI). Besides providing amore » network of nuclear forensics laboratories that are able to assist law enforcement during a nuclear smuggling event, the ITWG is also committed to the advancement of the science of nuclear forensic analysis, largely through participation in periodic table top and Collaborative Materials Exercises (CMXs). Exercise scenarios use “real world” samples with realistic forensics investigation time constraints and reporting requirements. These exercises are designed to promote best practices in the field and test, evaluate, and improve new technical capabilities, methods and techniques in order to advance the science of nuclear forensics. The ITWG recently completed its fourth CMX in the 20 year history of the organization. This was also the largest materials exercise to date, with participating laboratories from 16 countries or organizations. Three samples of low enriched uranium were shipped to these laboratories as part of an illicit trafficking scenario, for which each laboratory was asked to conduct nuclear forensic analyses in support of a fictitious criminal investigation. An objective review of the State Of Practice and Art of international nuclear forensic analysis based upon the outcome of this most recent exercise is provided.« less

Understanding critical barriers to implementing a clinical information system in a nursing home through the lens of a socio-technical perspective.

PubMed

Or, Calvin; Dohan, Michael; Tan, Joseph

2014-09-01

This paper addresses key barriers to implementing a clinical information system (CIS) in a Hong Kong nursing home setting, from a healthcare specific socio-technical perspective. Data was collected through field observations (n = 12) and semi-structured individual interviews (n = 18) of CIS stakeholders in a Hong Kong nursing home, and analyzed using the immersion/crystallization approach. Complex interactions relevant to our case were contextualized and interpreted within the perspective of the Sittig-Singh Healthcare Socio-Technical Framework (HSTF). Three broad clusters of implementation barriers from the eight HSTF dimensions were identified: (a) Infrastructure-based barriers, which relate to conflict between government regulations and system functional needs of users; lack of financial support; inconsistency between workflow, work policy, and procedures; and inadequacy of hardware-software infrastructural and technical support; (b) Process-based barriers, which relate to mismatch between the technology, existing work practice and workflow, and communication; low system speed, accessibility, and stability; deficient computer literacy; more experience in health care profession; clinical content inadequacy and unavailability; as well as poor system usefulness and user interface design; and (c) Outcome-based barriers, which relate to the lack of measurement and monitoring of system effectiveness. Two additional dimensions underlining the importance of the ability of a CIS to change are proposed to extend the Sittig-Singh HSTF. First, advocacy would promote the articulation and influence of changes in the system and subsequent outcomes by CIS stakeholders, and second, adaptability would ensure the ability of the system to adjust to emerging needs. The broad set of discovered implementation shortcomings expands prior research on why CIS can fail in nursing home settings. Moreover, our investigation offers a knowledge base and recommendations that can serve as a guide for future implementation strategies and policies in CIS initiatives.

Validation of a short questionnaire to assess mothers' perception of workplace breastfeeding support.

PubMed

Bai, Yeon; Peng, C-Y Joanne; Fly, Alyce D

2008-07-01

The purpose of this study was to create and establish the validity of a short questionnaire to measure mothers' perceived support for breastfeeding from the workplace. The items in the workplace breastfeeding support scale (WBSS) were derived from a literature review. The scale was self-administered in central Indiana during the fall of 2005 to a convenience sample of 66 volunteers who were primiparous, 6 to 12 months postpartum, worked outside home, and had initiated breastfeeding prior to the survey. Internal consistency (alpha) and split-half reliability (r) tests and a factor analysis were done to establish reliability and construct validity of the scale. The WBSS showed acceptable reliability (alpha=.77, r=0.86). Content validity was established by review using a panel of experts. Four distinct constructs of the scale were identified that accounted for 62.1% of the total variability of the scale: technical, environmental, facility, and peer support, thus establishing construct validity of the scale. Lactation consultants and worksite lactation program planners can use the WBSS to help mothers returning to work and to assess the needs for improvement of support programs.

Altair Lander Life Support: Design Analysis Cycles 4 and 5

NASA Technical Reports Server (NTRS)

Anderson, Molly; Curley, Su; Rotter, Henry; Stambaugh, Imelda; Yagoda, Evan

2011-01-01

Life support systems are a critical part of human exploration beyond low earth orbit. NASA s Altair Lunar Lander team is pursuing efficient solutions to the technical challenges of human spaceflight. Life support design efforts up through Design Analysis Cycle (DAC) 4 focused on finding lightweight and reliable solutions for the Sortie and Outpost missions within the Constellation Program. In DAC-4 and later follow on work, changes were made to add functionality for new requirements accepted by the Altair project, and to update the design as knowledge about certain issues or hardware matured. In DAC-5, the Altair project began to consider mission architectures outside the Constellation baseline. Selecting the optimal life support system design is very sensitive to mission duration. When the mission goals and architecture change several trade studies must be conducted to determine the appropriate design. Finally, several areas of work developed through the Altair project may be applicable to other vehicle concepts for microgravity missions. Maturing the Altair life support system related analysis, design, and requirements can provide important information for developers of a wide range of other human vehicles.

Altair Lander Life Support: Design Analysis Cycles 4 and 5

NASA Technical Reports Server (NTRS)

Anderson, Molly; Curley, Su; Rotter, Henry; Yagoda, Evan

2010-01-01

Life support systems are a critical part of human exploration beyond low earth orbit. NASA s Altair Lunar Lander team is pursuing efficient solutions to the technical challenges of human spaceflight. Life support design efforts up through Design Analysis Cycle (DAC) 4 focused on finding lightweight and reliable solutions for the Sortie and Outpost missions within the Constellation Program. In DAC-4 and later follow on work, changes were made to add functionality for new requirements accepted by the Altair project, and to update the design as knowledge about certain issues or hardware matured. In DAC-5, the Altair project began to consider mission architectures outside the Constellation baseline. Selecting the optimal life support system design is very sensitive to mission duration. When the mission goals and architecture change several trade studies must be conducted to determine the appropriate design. Finally, several areas of work developed through the Altair project may be applicable to other vehicle concepts for microgravity missions. Maturing the Altair life support system related analysis, design, and requirements can provide important information for developers of a wide range of other human vehicles.

Scaffolding Collaborative Technical Writing with Procedural Facilitation and Synchronous Discussion

ERIC Educational Resources Information Center

Yeh, Shiou-Wen; Lo, Jia-Jiunn; Huang, Jeng-Jia

2011-01-01

With the advent of computer technology, researchers and instructors are attempting to devise computer support for effective collaborative technical writing. In this study, a computer-supported environment for collaborative technical writing was developed. This system (Process-Writing Wizard) provides process-oriented scaffolds and a synchronous…

USACE AIS Transmit Technical Support Summary Report

DTIC Science & Technology

2014-09-01

the TAG block for the correct transmitters, and then send to the USACE AIS network. B. Outbound openings in the USCG firewall for the USCG Message...USACE AIS Transmit Technical Support Summary Report Distribution Statement A: Approved for public release; distribution is unlimited...September 2014 Report No. CD-D-09-15 USACE AIS Transmit Technical Support Summary Report ii UNCLAS//Public | CG-926 RDC | I. Gonin et al. Public

Sociotechnical Challenges and Progress in Using Social Media for Health

PubMed Central

Cavusoglu, Hasan; Frisch, Larry; Fels, Sidney

2013-01-01

Social media tools that connect patients, caregivers, and health providers offer great potential for helping people access health advice, receive and give social support, manage or cope with chronic conditions, and make day-to-day health decisions. These systems have seen widespread adoption, but often fail to support the goals as fully as designers and users would like. Through Ackerman’s lens of the “sociotechnical gap” and computer supported cooperative work (CSCW) as a science of the artificial, we review contemporary sociotechnical challenges and progress for using social media to support health. These challenges include a tension between privacy and sharing, policy information credibility, accessibility, and tailoring in social spaces. Those studying, building, deploying, and using social media systems to further health goals will benefit from approaching this work by borrowing from Ackerman’s framing of CSCW. In particular, this requires acknowledgment that technical systems will not fully meet our social goals, and then adopting design and educational approaches that are appropriate to fill this gap, building less-nuanced systems as partial solutions and tools for advancing our understanding, and by working with the CSCW research community to develop and pursue key lines of inquiry. PMID:24148206

Transforming South-South technical support to fight noncommunicable diseases.

PubMed

Shakow, Aaron D A; Bukhman, Gene; Adebona, Olumuyiwa; Greene, Jeremy; de Dieu Ngirabega, Jean; Binagwaho, Agnès

2012-03-01

At the UN High-Level Meeting on non-communicable diseases (NCD) in September 2011, each member state was challenged to create a multisectoral national policy and plan for the prevention and control of non-communicable disease by 2013. Few low-income countries, however, currently have such plans. Their governments are likely to turn for assistance in drafting and implementation to multilateral agencies and Contract Technical Support Organizations recommended by development partners. Yet because many NCD seen in the lowest-income countries differ significantly from those prevalent elsewhere, existing providers of external technical support may lack the necessary experience to support strategic planning for NCD interventions in these settings. This article reviews currently available mechanisms of technical support for health sector planning. It places them in the broader historical context of post- World War II international development assistance and the more recent campaigns for horizontal "South-South" cooperation and aid effectiveness. It proposes bilateral technical assistance by low income-countries themselves as the natural evolution of development assistance in health. Such programs, it argues, may be able to improve the quality of technical support to low-income countries for strategic planning in the NCD area while directing resources to the regions where they are most needed. Copyright © 2012 World Heart Federation (Geneva). Published by Elsevier B.V. All rights reserved.

Invention and Writing in Technical Work: Representing the Object.

ERIC Educational Resources Information Center

Winsor, Dorothy A.

1994-01-01

Describes the way invention is relevant to the practice of technical writing. Studies three engineering students engaged in a real-world project. Shows how the students' technical work and invention for the final report were simultaneous activities. Claims that invention for and through writing overlaps with technical invention. (HB)

A Theory of Sex Differences in Technical Aptitude and Some Supporting Evidence.

PubMed

Schmidt, Frank L

2011-11-01

In this article, I present a theory that explains the origin of sex differences in technical aptitudes. The theory takes as proven that there are no sex differences in general mental ability (GMA), and it postulates that sex differences in technical aptitude (TA) stem from differences in experience in technical areas, which is in turn based on sex differences in technical interests. Using a large data set, I tested and found support for four predictions made by this theory: (a) the construct level correlation between technical aptitude and GMA is larger for females than males, (b) the observed and true score variability of technical aptitude is greater among males than females, (c) at every level of GMA females have lower levels of technical aptitude, and (d) technical aptitude measures used as estimates of GMA for decision purposes would result in underestimation of GMA levels for girls and women. Given that GMA carries the weight of prediction of job performance, the support found for this last prediction suggests that, for many jobs, technical aptitude tests may underpredict the job performance of female applicants and employees. Future research should examine this question. © Association for Psychological Science 2011.

GROUND WATER TECHNICAL SUPPORT CENTER

EPA Science Inventory

EPA's Office of Research and Development operates a Ground Water Technical Support Center (GWTSC). The Center provides support on issues regarding subsurface contamination, contaminant fluxes to other media (e.g., surface water or air), and ecosystem restoration. The GWTSC creat...

2005 v4.3 Technical Support Document

EPA Pesticide Factsheets

Emissions Modeling for the Final Mercury and Air Toxics Standards Technical Support Document describes how updated 2005 NEI, version 2 emissions were processed for air quality modeling in support of the final Mercury and Air Toxics Standards (MATS).

Mission Simulation Facility: Simulation Support for Autonomy Development

NASA Technical Reports Server (NTRS)

Pisanich, Greg; Plice, Laura; Neukom, Christian; Flueckiger, Lorenzo; Wagner, Michael

2003-01-01

The Mission Simulation Facility (MSF) supports research in autonomy technology for planetary exploration vehicles. Using HLA (High Level Architecture) across distributed computers, the MSF connects users autonomy algorithms with provided or third-party simulations of robotic vehicles and planetary surface environments, including onboard components and scientific instruments. Simulation fidelity is variable to meet changing needs as autonomy technology advances in Technical Readiness Level (TRL). A virtual robot operating in a virtual environment offers numerous advantages over actual hardware, including availability, simplicity, and risk mitigation. The MSF is in use by researchers at NASA Ames Research Center (ARC) and has demonstrated basic functionality. Continuing work will support the needs of a broader user base.

The hospital library and the enterprise portal.

PubMed

Bandy, Margaret; Fosmire, Brenda

2004-01-01

At Exempla Healthcare, the medical librarians and the e-Business staff are creating an enterprise information portal where medical reference is targeted, easily accessible, and supported by the medical librarians. A team approach has been essential. The e-Business department has worked for nine months coordinating technical challenges required to support personalization, targeted communications, and a single access point for clinical patient data. Exempla medical librarians have been involved in the definition and design of information access needs from the very beginning. The Clinicians Portal was the first developed, with other customizations to follow. Many challenges remain, but by definition, a portal is designed to be flexible and adapt to the changing needs of the enterprise it supports.

SNL Five-Year Facilities & Infrastructure Plan FY2015-2019

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cipriani, Ralph J.

2014-12-01

Sandia’s development vision is to provide an agile, flexible, safer, more secure, and efficient enterprise that leverages the scientific and technical capabilities of the workforce and supports national security requirements in multiple areas. Sandia’s Five-Year Facilities & Infrastructure Planning program represents a tool to budget and prioritize immediate and short-term actions from indirect funding sources in light of the bigger picture of proposed investments from direct-funded, Work for Others and other funding sources. As a complementary F&I investment program, Sandia’s indirect investment program supports incremental achievement of the development vision within a constrained resource environment.

JPRS Report Political Affairs.

DTIC Science & Technology

1990-09-19

Union has financial resources at its disposal. In addition to the stipend, 150 rubles apiece is paid out. Add to that an additional 1,500 for wardrobe...At the same time, a number of acts should be adopted which would put beneath the law the appropriate mate- rial-technical, financial , personnel and...In all the institutions and enterprises, specific measures relating to financial and training support are to be worked out for the voluntary study

Single-Spin Magnetic Resonance Force Microscopy

DTIC Science & Technology

2005-08-31

computational load and noise outside the passband and generating lock-in (synchronous detection) signals for online diagnostics, system identification... Online . 20. We thank J. Sidles, K. Holczer, and A. Hero for discussions and D. Pearson and M. Sherwood for technical assistance. This work was...Office. Supporting Online Material www.sciencemag.org/cgi/content/full/307/5708/408/ DC1 Materials and Methods Figs. S1 and S2 References 25 October 2004

Department of Energy Natural Phenomena Hazards Mitigation Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murray, R.C.

1993-09-01

This paper will present a summary of past and present accomplishments of the Natural Phenomena Hazards Program that has been ongoing at Lawrence Livermore National Laboratory since 1975. The Natural Phenomena covered includes earthquake; winds, hurricanes, and tornadoes; flooding and precipitation; lightning; and volcanic events. The work is organized into four major areas (1) Policy, requirements, standards, and guidance (2) Technical support, research development, (3) Technology transfer, and (4) Oversight.

Science and Engineering Library and Information Service Development in Support of Research and Development in Indonesia; Report to the Chairman of the Indonesian Institute of Sciences (LIPI).

ERIC Educational Resources Information Center

Shank, Russell

Access to scientific and technical information is essential to the conduct of high quality research and development work. Indonesia's scientists and engineers in Government research institutes are generally not being well-served by their own libraries. The most serious deficiencies are: (1) inadequately trained library staffs, (2) lack of…

Community for Data Integration 2013 Annual Report

USGS Publications Warehouse

Chang, Michelle Y.; Carlino, Jennifer; Barnes, Christopher; Blodgett, David L.; Bock, Andrew R.; Everette, Anthony L.; Fernette, Gregory L.; Flint, Lorraine E.; Gordon, Janice M.; Govoni, David L.; Hay, Lauren E.; Henkel, Heather S.; Hines, Megan K.; Holl, Sally L.; Homer, Collin G.; Hutchison, Vivian B.; Ignizio, Drew A.; Kern, Tim J.; Lightsom, Frances L.; Markstrom, Steven L.; O'Donnell, Michael S.; Schei, Jacquelyn L.; Schmid, Lorna A.; Schoephoester, Kathryn M.; Schweitzer, Peter N.; Skagen, Susan K.; Sullivan, Daniel J.; Talbert, Colin; Warren, Meredith Pavlick

2015-01-01

grow overall USGS capabilities with data and information by increasing visibility of the work of many people throughout the USGS and the CDI community. To achieve these goals, the CDI operates within four applied areas: monthly forums, annual workshop/webinar series, working groups, and projects. The monthly forums, also known as the Opportunity/Challenge of the Month, provide an open dialogue to share and learn about data integration efforts or to present problems that invite the Community to offer solutions, advice, and support. Since 2010, the CDI has also sponsored annual workshops/webinar series to encourage the exchange of ideas, sharing of activities, presentations of current projects, and networking among members. Stemming from common interests, the working groups are focused on efforts to address data management and technical 2 challenges, including the development of standards and tools, improving interoperability and information infrastructure, and data preservation within USGS and its partners. The growing support for the activities of the working groups led to the CDI’s first formal request for proposals (RFP) process in 2013 to fund projects that produced tangible products. Today the CDI continues to hold an annual RFP that create data management tools and practices, collaboration tools, and training in support of data integration and delivery.

Building, Maintaining, and Ending Relationships: An Urban School District and a Technical Assistance Team. Documentation and Technical Assistance in Urban Schools.

ERIC Educational Resources Information Center

Holmes, Manford L.

This paper describes the nature of the relationships developed between the technical assistance team of the Documentation and Technical Assistance (DTA) Project and members of a Chicago (Illinois) school district staff with whom the DTA worked. First, the methodology with which the technical assistance work was studied is described, as is the…

A collaborative design method to support integrated care. An ICT development method containing continuous user validation improves the entire care process and the individual work situation

PubMed Central

Scandurra, Isabella; Hägglund, Maria

2009-01-01

Introduction Integrated care involves different professionals, belonging to different care provider organizations and requires immediate and ubiquitous access to patient-oriented information, supporting an integrated view on the care process [1]. Purpose To present a method for development of usable and work process-oriented information and communication technology (ICT) systems for integrated care. Theory and method Based on Human-computer Interaction Science and in particular Participatory Design [2], we present a new collaborative design method in the context of health information systems (HIS) development [3]. This method implies a thorough analysis of the entire interdisciplinary cooperative work and a transformation of the results into technical specifications, via user validated scenarios, prototypes and use cases, ultimately leading to the development of appropriate ICT for the variety of occurring work situations for different user groups, or professions, in integrated care. Results and conclusions Application of the method in homecare of the elderly resulted in an HIS that was well adapted to the intended user groups. Conducted in multi-disciplinary seminars, the method captured and validated user needs and system requirements for different professionals, work situations, and environments not only for current work; it also aimed to improve collaboration in future (ICT supported) work processes. A holistic view of the entire care process was obtained and supported through different views of the HIS for different user groups, resulting in improved work in the entire care process as well as for each collaborating profession [4].

Differentiated Technical Assistance for Sustainable Transformation. Technical Assistance Brief #2

ERIC Educational Resources Information Center

McCart, Amy; McSheehan, Michael; Sailor, Wayne

2015-01-01

Schoolwide Integrated Framework for Transformation (SWIFT) Center's technical assistance process supports states, districts, and schools as they become excellent and equitable teaching and learning environments for "all" students. Each school with support from its district begins this process from its own starting point and travels its…

31 CFR 543.301 - Arms or any related materiel.

Code of Federal Regulations, 2010 CFR

2010-07-01

... solely for humanitarian or protective use, and related technical assistance and training; (c) Supplies of... of arms and related materiel and technical training and assistance intended solely for support of or... technical assistance intended solely for the support of or use by the United Nations Operation in Côte d...

31 CFR 547.301 - Arms or any related materiel.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Supplies of arms and related materiel, technical training, and assistance intended solely for support of or... of arms and related materiel, technical training, and assistance described in paragraphs (a)(1... technical training and assistance intended solely for support of or use by MONUC; (c) Supplies of non-lethal...

Widening the adoption of workflows to include human and human-machine scientific processes

NASA Astrophysics Data System (ADS)

Salayandia, L.; Pinheiro da Silva, P.; Gates, A. Q.

2010-12-01

Scientific workflows capture knowledge in the form of technical recipes to access and manipulate data that help scientists manage and reuse established expertise to conduct their work. Libraries of scientific workflows are being created in particular fields, e.g., Bioinformatics, where combined with cyber-infrastructure environments that provide on-demand access to data and tools, result in powerful workbenches for scientists of those communities. The focus in these particular fields, however, has been more on automating rather than documenting scientific processes. As a result, technical barriers have impeded a wider adoption of scientific workflows by scientific communities that do not rely as heavily on cyber-infrastructure and computing environments. Semantic Abstract Workflows (SAWs) are introduced to widen the applicability of workflows as a tool to document scientific recipes or processes. SAWs intend to capture a scientists’ perspective about the process of how she or he would collect, filter, curate, and manipulate data to create the artifacts that are relevant to her/his work. In contrast, scientific workflows describe the process from the point of view of how technical methods and tools are used to conduct the work. By focusing on a higher level of abstraction that is closer to a scientist’s understanding, SAWs effectively capture the controlled vocabularies that reflect a particular scientific community, as well as the types of datasets and methods used in a particular domain. From there on, SAWs provide the flexibility to adapt to different environments to carry out the recipes or processes. These environments range from manual fieldwork to highly technical cyber-infrastructure environments, i.e., such as those already supported by scientific workflows. Two cases, one from Environmental Science and another from Geophysics, are presented as illustrative examples.

Enhancing the capacity of substance abuse prevention coalitions through training and technical assistance.

PubMed

Watson-Thompson, Jomella; Woods, Nikki Keene; Schober, Daniel J; Schultz, Jerry A

2013-01-01

Community capacity may be enhanced through intermediary supports that provide training and technical assistance (TA). This study used a randomized pre/posttest design to assess the impact of training and TA on coalition capacity. Seven community coalitions from the Midwest participated in the 2-year study, which included 36 hours of training, followed by monthly TA calls to support action planning implementation for prioritized processes. Collaborative processes most commonly identified as high-need areas for TA were Developing Organizational Structure, Documenting Progress, Making Outcomes Matter, and Sustaining the Work. Based on a coalition survey, the average change for processes prioritized through TA across all seven coalitions was .27 (SD = .29), while the average change for non-prioritized processes was .09 (SD = .20) (t(6) = 4.86, p = .003, d = 1.84). The findings from this study suggest that TA can increase coalition capacity for implementing collaborative processes using a participatory approach.

Water reuse in the Apatlaco River Basin (México): a feasibility study.

PubMed

Moeller-Chávez, G; Seguí-Amórtegui, L; Alfranca-Burriel, O; Escalante-Estrada, V; Pozo-Román, F; Rivas-Hernández, A

2004-01-01

The aim of this work is to determine the technical and economic feasibility of implementing different reclamation and reuse projects that improve the quality of the Apatlaco river basin located in the central part of Mexico. A special methodology based on a decision support system was developed. This methodology allows to decide if it is convenient or not to finance a reclamation or reuse project for the most common water uses in the basin. This methodology is based on the net present value criteria (NPV) of the effective cash flow during the useful life of the project. The results obtained reveal a technical and economical feasibility for industrial reuse in Jiutepec and for agricultural reuse in Zacatepec and Emiliano Zapata. On the other hand, sanitation projects are not feasible in all cases analyzed. Therefore, Mexican Regulation (Ley Federal de Derechos en Materia de Agua) as currently implemented, does not promote and support this kind of projects.

The joint use of resilience engineering and lean production for work system design: A study in healthcare.

PubMed

Rosso, Caroline Brum; Saurin, Tarcisio Abreu

2018-09-01

Although lean production (LP) has been increasingly adopted in healthcare systems, its benefits often fall short of expectations. This might be partially due to the failure of lean to account for the complexity of healthcare. This paper discusses the joint use of principles of LP and resilience engineering (RE), which is an approach for system design inspired by complexity science. Thus, a framework for supporting the design of socio-technical systems, which combines insights from LP and RE, was developed and tested in a system involving a patient flow from an emergency department to an intensive care unit. Based on this empirical study, as well as on extant theory, eight design propositions that support the framework application were developed. Both the framework and its corresponding propositions can contribute to the design of socio-technical systems that are at the same time safe and efficient. Copyright © 2018 Elsevier Ltd. All rights reserved.

Designing Flightdeck Procedures: Literature Resources

NASA Technical Reports Server (NTRS)

Feldman, Jolene; Barshi, Immanuel; Degani, Asaf; Loukopoulou, Loukia; Mauro, Robert

2017-01-01

This technical publication contains the titles, abstracts, summaries, descriptions, and/or annotations of available literature sources on procedure design and development, requirements, and guidance. It is designed to provide users with an easy access to available resources on the topic of procedure design, and with a sense of the contents of these sources. This repository of information is organized into the following publication sources: Research (e.g., journal articles, conference proceedings), Manufacturers' (e.g., operation manuals, newsletters), and Regulatory and/or Government (e.g., advisory circulars, reports). An additional section contains synopses of Accident/Incident Reports involving procedures. This work directly supports a comprehensive memorandum by Barshi, Mauro, Degani, & Loukopoulou (2016) that summarizes the results of a multi-year project, partially funded by the FAA, to develop technical reference materials that support guidance on the process of developing cockpit procedures (see "Designing Flightdeck Procedures" https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20160013263.pdf). An extensive treatment of this topic is presented in a forthcoming book by the same authors.

Community for Data Integration 2014 annual report

USGS Publications Warehouse

Langseth, Madison L.; Chang, Michelle Y.; Carlino, Jennifer; Birch, Daniella D.; Bradley, Joshua; Bristol, R. Sky; Conzelmann, Craig; Diehl, Robert H.; Earle, Paul S.; Ellison, Laura E.; Everette, Anthony L.; Fuller, Pamela L.; Gordon, Janice M.; Govoni, David L.; Guy, Michelle R.; Henkel, Heather S.; Hutchison, Vivian B.; Kern, Tim; Lightsom, Frances L.; Long, Joseph W.; Longhenry, Ryan; Preston, Todd M.; Smith, Stan W.; Viger, Roland J.; Wesenberg, Katherine; Wood, Eric C.

2015-10-02

To achieve these goals, the CDI operates within four applied areas: monthly forums, annual workshop/webinar series, working groups, and projects. The monthly forums, also known as the Opportunity/Challenge of the Month, provide an open dialogue to share and learn about data integration efforts or to present problems that invite the community to offer solutions, advice, and support. Since 2010, the CDI has also sponsored annual workshops/webinar series to encourage the exchange of ideas, sharing of activities, presentations of current projects, and networking among members. Stemming from common interests, the working groups are focused on efforts to address data management and technical challenges including the development of standards and tools, improving interoperability and information infrastructure, and data preservation within USGS and its partners. The growing support for the activities of the working groups led to the CDI’s first formal request for proposals (RFP) process in 2013 to fund projects that produced tangible products. As of 2014, the CDI continues to hold an annual RFP that creates data management tools and practices, collaboration tools, and training in support of data integration and delivery.

Characteristics of a virtual community for individuals who are d/deaf and hard of hearing.

PubMed

Shoham, Snunith; Heber, Meital

2012-01-01

The content of 2,050 messages on a virtual forum for d/Deaf and hard of hearing people in Israel was analyzed. Interactions and behavior were monitored to determine if behavior on the forum expressed social support, and whether the community was an entirely virtual community or a real community whose members also met in other venues. Subjects discussed in messages included technical difficulties, coping with difficulties presented by hearing loss, adjusting to assistive devices, difficulties at school and work, accessibility issues, difficulties communicating with the hearing world, and rights. Messages were also used to initiate a range of social activities. Classification of behaviors per the Social Support Behavior Code (Cutrona & Suhr, 1992) showed that most were in the category of informational support. Other types of support in the model, tangible assistance, emotional support, social network support, and esteem support, were evident in fewer messages.

Barriers to Electronic Health Record Adoption: a Systematic Literature Review.

PubMed

Kruse, Clemens Scott; Kristof, Caitlin; Jones, Beau; Mitchell, Erica; Martinez, Angelica

2016-12-01

Federal efforts and local initiatives to increase adoption and use of electronic health records (EHRs) continue, particularly since the enactment of the Health Information Technology for Economic and Clinical Health (HITECH) Act. Roughly one in four hospitals not adopted even a basic EHR system. A review of the barriers may help in understanding the factors deterring certain healthcare organizations from implementation. We wanted to assemble an updated and comprehensive list of adoption barriers of EHR systems in the United States. Authors searched CINAHL, MEDLINE, and Google Scholar, and accepted only articles relevant to our primary objective. Reviewers independently assessed the works highlighted by our search and selected several for review. Through multiple consensus meetings, authors tapered articles to a final selection most germane to the topic (n = 27). Each article was thoroughly examined by multiple authors in order to achieve greater validity. Authors identified 39 barriers to EHR adoption within the literature selected for the review. These barriers appeared 125 times in the literature; the most frequently mentioned barriers were regarding cost, technical concerns, technical support, and resistance to change. Despite federal and local incentives, the initial cost of adopting an EHR is a common existing barrier. The other most commonly mentioned barriers include technical support, technical concerns, and maintenance/ongoing costs. Policy makers should consider incentives that continue to reduce implementation cost, possibly aimed more directly at organizations that are known to have lower adoption rates, such as small hospitals in rural areas.

Air Quality Modeling Technical Support Document for the Final Cross State Air Pollution Rule Update

EPA Pesticide Factsheets

In this technical support document (TSD) we describe the air quality modeling performed to support the final Cross State Air Pollution Rule for the 2008 ozone National Ambient Air Quality Standards (NAAQS).

78 FR 30233 - Defense Federal Acquisition Regulation Supplement; Government Support Contractor Access to...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-22

... Number 0750-AG38 Defense Federal Acquisition Regulation Supplement; Government Support Contractor Access... Government support contractors to have access to proprietary technical data belonging to prime contractors and other third parties, provided that the technical data owner may require the support contractor to...

Engaging the Geodetic and Geoscience Communities in EarthScope Education and Outreach

NASA Astrophysics Data System (ADS)

Charlevoix, D. J.; Berg, M.; Morris, A. R.; Olds, S. E.

2013-12-01

UNAVCO is NSF's geodetic facility and operates as a university-governed consortium dedicated to facilitating geoscience research and education, including the support of EarthScope. The Education and Community Engagement program at UNAVCO provides support for broader impacts both externally to the broader University and EarthScope community as well as internally to the UNAVCO. During the first 10 years of EarthScope UNAVCO has engaged in outreach and education activities across the EarthScope footprint ranging from outreach to formal and informal educators and interpreters, to technical training for university faculty and researchers. UNAVCO works jointly with the EarthScope National Office and IRIS while simultaneously maintaining and developing an independent engagement and education program. UNAVCO provides training in the form of technical short courses to researchers including graduate students and early-career professionals, and conducts educational workshops for K-12 educators. A suite of educational materials focused on the integration of EarthScope data into curriculum materials is available from UNAVCO and will soon expand the undergraduate offerings to include a broader suite of geodesy applications activities for undergraduate students. UNAVCO provides outreach materials and in support of EarthScope including summaries of research project and campaign highlights, science snapshots featuring summaries of scientific advancements made possible by UNAVCO services and non-technical communications via social media. UNAVCO also provides undergraduate students exposure to EarthScope science research participation in a year-long research internship managed by UNAVCO (Research Experiences in Solid Earth Science for Students - RESESS).

Making geoscience education accessible for students who are blind and visually impaired

NASA Astrophysics Data System (ADS)

Charlevoix, D. J.; Berg, M.; Morris, A. R.; Olds, S. E.

2011-12-01

UNAVCO is NSF's geodetic facility and operates as a university-governed consortium dedicated to facilitating geoscience research and education, including the support of EarthScope. The Education and Community Engagement program at UNAVCO provides support for broader impacts both externally to the broader University and EarthScope community as well as internally to the UNAVCO. During the first 10 years of EarthScope UNAVCO has engaged in outreach and education activities across the EarthScope footprint ranging from outreach to formal and informal educators and interpreters, to technical training for university faculty and researchers. UNAVCO works jointly with the EarthScope National Office and IRIS while simultaneously maintaining and developing an independent engagement and education program. UNAVCO provides training in the form of technical short courses to researchers including graduate students and early-career professionals, and conducts educational workshops for K-12 educators. A suite of educational materials focused on the integration of EarthScope data into curriculum materials is available from UNAVCO and will soon expand the undergraduate offerings to include a broader suite of geodesy applications activities for undergraduate students. UNAVCO provides outreach materials and in support of EarthScope including summaries of research project and campaign highlights, science snapshots featuring summaries of scientific advancements made possible by UNAVCO services and non-technical communications via social media. UNAVCO also provides undergraduate students exposure to EarthScope science research participation in a year-long research internship managed by UNAVCO (Research Experiences in Solid Earth Science for Students - RESESS).

Perspectives in understanding open access to research data - infrastructure and technology challenges

NASA Astrophysics Data System (ADS)

Bigagli, Lorenzo; Sondervan, Jeroen

2014-05-01

The Policy RECommendations for Open Access to Research Data in Europe (RECODE) project, started in February 2013 with a duration of two years, has the objective to identify a series of targeted and over-arching policy recommendations for Open Access to European research data, based on existing good practice and addressing such hindering factors as stakeholder fragmentation, technical and infrastructural issues, ethical and legal issues, and financial and institutional policies. In this work we focus on the technical and infrastructural aspect, where by "infrastructure" we mean the technological assets (hardware and software), the human resources, and all the policies, processes, procedures and training for managing and supporting its continuous operation and evolution. The context targeted by RECODE includes heterogeneous networks, initiatives, projects and communities that are fragmented by discipline, geography, stakeholder category (publishers, academics, repositories, etc.) as well as other boundaries. Many of these organizations are already addressing key technical and infrastructural barriers to Open Access to research data. Such barriers may include: lack of automatic mechanisms for policy enforcement, lack of metadata and data models supporting open access, obsolescence of infrastructures, scarce awareness about new technological solutions, lack of training and/or expertise on IT and semantics aspects. However, these organizations are often heterogeneous and fragmented by discipline, geography, stakeholder category (publishers, academics, repositories, etc.) as well as other boundaries, and often work in isolation, or with limited contact with one another. RECODE has addressed these challenges, and the possible solutions to mitigate them, engaging all the identified stakeholders in a number of ways, including an online questionnaire, case studies interviews, literature review, a workshop. The conclusions have been validated by the RECODE Advisory Board and will contribute to shape the RECODE policy guidelines for Open Access to Research Data. In the work, we report on the identified technological and infrastructural issues, classified according to the barriers of heterogeneity, sustainability, volume, quality, and security.

Future NTP Development Synergy Leveraged from Current J-2X Engine Development

NASA Astrophysics Data System (ADS)

Ballard, Richard O.

2008-01-01

This paper is a discussion of how the many long-lead development elements required for the realization of a future nuclear thermal propulsion (NTP) system can be effectively leveraged from the ongoing work being conducted on the J-2X engine program for the Constellation Program. Development studies conducted to date for NTP forward planning have identified a number of technical areas that will require advancement to acceptable technology readiness levels (TRLs) before they can be utilized in NTP system development. These include high-temperature, high-area ratio nozzle extension; long-life, low-NPSP turbomachinery; and low-boiloff propellant management, and a qualified nuclear fuel element. The current J-2X program is working many of these areas that can be leveraged to support NTP development in a highly compatible and synergistic fashion. In addition to supporting technical development, there are other programmatic issues being worked in the J-2X program that can be leveraged by a future NTP development program. These include compliance with recently-evolved space system requirements such as human-rating, fault tolerance and fracture control. These and other similar mandatory system requirements have been adopted by NASA and can result in a significant technical impact beyond elevation of the root technologies required by NTP. Finally, the exploitation of experience, methodologies, and procedures developed by the J-2X program in the areas of verification, qualification, certification, altitude simulation testing, and facility definition will be especially applicable to a future NTP system. The similarities in system mission (in-space propulsion) and operational environment (vacuum, zero-gee) between J-2X and NTP make this highly synergistic. Thus, it can be shown that the collective benefit of leveraging experience and technologies developed during the J-2X program can result in significant savings in development cost and schedule for NTP.

Future NTP Development Synergy Leveraged from Current J-2X Engine Development

NASA Technical Reports Server (NTRS)

Ballard, Richard O.

2008-01-01

This paper is a discussion of how the many long-lead development elements required for the realization of a future nuclear thermal propulsion (NTP) system can be effectively leveraged from the ongoing work being conducted on the J-2X engine program for the Constellation Program. Development studies conducted to date for NTP forward planning have identified a number of technical areas that will require advancement to acceptable technology readiness levels (TRLs) before they can be utilized in NTP system development. These include high-temperature, high-area ratio nozzle extension; long-life, low-NPSP. turbomachinery; and low-boiloff propellant management; and a qualified nuclear fuel element. The current J-2X program is working many of these areas that can be leveraged to support NTP development in a highly compatible and synergistic fashion. In addition to supporting technical development, there are other programmatic issues being worked in the J-2X program that can be leveraged by a future NTP development program. These include compliance with recently-evolved space system requirements such as human-rating, fault tolerance and fracture control. These and other similar mandatory system requirements have been adopted by NASA and can result in a significant technical impact beyond elevation of the root technologies required by NTP. Finally, the exploitation of experience, methodologies, and procedures developed by the J-2X program in the areas of verification, qualification, certification, altitude simulation testing, and facility definition will be especially applicable to a future NTP system. The similarities in system mission (in-space propulsion) and operational environment (vacuum, zero-gee) between J-2X and NTP make this highly synergistic. Thus, it can be $hown that the collective benefit of leveraging experience and technologies developed during the J-2X program can result in significant savings in development cost and schedule for NTP.

ERLN Technical Support for Labs

EPA Pesticide Factsheets

The Environmental Response Laboratory Network provides policies and guidance on lab and data requirements, Standardized Analytical Methods, and technical support for water and radiological sampling and analysis

48 CFR 2452.237-73 - Conduct of Work and Technical Guidance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... conditions of the contract. (c) The GTR will issue technical guidance in writing or, if issued orally, he/she... Technical Guidance. 2452.237-73 Section 2452.237-73 Federal Acquisition Regulations System DEPARTMENT OF... Provisions and Clauses 2452.237-73 Conduct of Work and Technical Guidance. As prescribed in 2437.110(d...

Software Engineering Improvement Activities/Plan

NASA Technical Reports Server (NTRS)

2003-01-01

bd Systems personnel accomplished the technical responsibilities for this reporting period, as planned. A close working relationship was maintained with personnel of the MSFC Avionics Department Software Group (ED14). Work accomplishments included development, evaluation, and enhancement of a software cost model, performing literature search and evaluation of software tools available for code analysis and requirements analysis, and participating in other relevant software engineering activities. Monthly reports were submitted. This support was provided to the Flight Software Group/ED 1 4 in accomplishing the software engineering improvement engineering activities of the Marshall Space Flight Center (MSFC) Software Engineering Improvement Plan.

SXI Prototype mirror mount

NASA Technical Reports Server (NTRS)

1995-01-01

This final report describes the work performed from June 1993 to January 1995. The purpose of this contract was to provide optomechanical engineering and fabrication support to the Solar X-ray Imager (SXI) program in the areas of mirror, optical bench and camera assemblies of the telescope. The Center for Applied Optics (CAO) worked closely with the Optics and S&E technical staff of MSFC to develop and investigate the most viable and economical options for the design and fabrication of a number of parts for the various telescope assemblies. All the tasks under this delivery order have been successfully completed within budget and schedule.

From crisis to development--analysis of air traffic control work processes.

PubMed

Teperi, Anna-Maria; Leppänen, Anneli

2011-03-01

In this study an intervention to improve work processes in air traffic control (ATC) is evaluated. The background was the Finnish air traffic controllers' strike of 1999. The old ways of thinking and acting did not support development of ATC prompting a need for a new kind of working culture in the organisation. Several actions were started. In one of these, ATC work processes were modelled by personnel and development plans concerning work were delivered to top management. Different actors (management, trade union, stakeholders) were interviewed before (n=16) and after the project (n=7). The intervention supported systematic co-operation between different actors in the organisation. However, a follow-up revealed that only a few participants had adopted the idea of continuous work development. Mastery of human factors is crucial in a high reliability work environment such as ATC. But how is the analytical and co-operative aspect kept alive in an organisation that is run by strict international regulation and has a strong technical competence, but is not that strong in collaborative and human aspects? Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

[Mesoamerican Public Health Institute: technical support and capacity strengthening arm of the Mesoamerican Public Health System].

PubMed

González-Block, Miguel A; Molina-Rodríguez, Juan Francisco; Becerril, Víctor; Vargas, Emily

2011-01-01

The Mesoamerican Public Health Institute (IMSP) was constituted in 2009 as the technical organ of the Mesoamerican Public Health System (SMSP) and the Virtual Network of Academic Institutions. Health system capacity strengthening needs and preliminary training results were assessed in the first phase. The SMSP Master Plans were content-analyzed for each priority and members of the Malaria and Dengue Working Group were surveyed. The training needs required for each SMSP priority area were identified and knowledge management needs for malaria and dengue analyzed. Competencies were mapped across strategic, tactical and operative personnel that will be requiring them. IMSP trained in its first year 91 persons in eight countries. IMSP is responding to the Mesoamerican region's public health needs.

Alternatives for Jet Engine Control. Volume 1: Modelling and Control Design with Jet Engine Data

NASA Technical Reports Server (NTRS)

Sain, M. K.

1985-01-01

This document compiles a comprehensive list of publications supported by, or related to, National Aeronautics and Space Administration Grant NSG-3048, entitled "Alternatives for Jet Engine Control". Dr. Kurt Seldner was the original Technical Officer for the grant, at Lewis Research Center. Dr. Bruce Lehtinen was the final Technical Officer. At the University of Notre Dame, Drs. Michael K. Sain and R. Jeffrey Leake were the original Project Directors, with Dr. Sain becoming the final Project Director. Publications cover work over a ten-year period. The Final Report is divided into two parts. Volume i, "Modelling and Control Design with Jet Engine Data", follows in this report. Volume 2, "Modelling and Control Design with Tensors", has been bound separately.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, D.W.; Heinrich, R.R.; Jensen, K.J.

The Analytical Chemistry Laboratory is a full-cost-recovery service center, with the primary mission of providing a broad range of technical support services to the scientific and engineering programs at ANL. In addition, ACL conducts a research program in analytical chemistry, works on instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL handles a wide range of analytical problems, from routine standard analyses to unique problems that require significant development of methods and techniques. The purpose of this report is to summarize the technical and administrative activities of the Analytical Chemistry Laboratory (ACL) atmore » Argonne National Laboratory (ANL) for Fiscal Year 1985 (October 1984 through September 1985). This is the second annual report for the ACL. 4 figs., 1 tab.« less

Earth applications of closed ecological systems: relevance to the development of sustainability in our global biosphere.

PubMed

Nelson, M; Allen, J; Alling, A; Dempster, W F; Silverstone, S

2003-01-01

The parallels between the challenges facing bioregenerative life support in artificial closed ecological systems and those in our global biosphere are striking. At the scale of the current global technosphere and expanding human population, it is increasingly obvious that the biosphere can no longer safely buffer and absorb technogenic and anthropogenic pollutants. The loss of biodiversity, reliance on non-renewable natural resources, and conversion of once wild ecosystems for human use with attendant desertification/soil erosion, has led to a shift of consciousness and the widespread call for sustainability of human activities. For researchers working on bioregenerative life support in closed systems, the small volumes and faster cycling times than in the Earth's biosphere make it starkly clear that systems must be designed to ensure renewal of water and atmosphere, nutrient recycling, production of healthy food, and safe environmental methods of maintaining technical systems. The development of technical systems that can be fully integrated and supportive of living systems is a harbinger of new perspectives as well as technologies in the global environment. In addition, closed system bioregenerative life support offers opportunities for public education and consciousness changing of how to live with our global biosphere. c2003 COSPAR. Published by Elsevier Science Ltd. All rights reserved.

Air Quality Modeling Technical Support Document for the 2008 Ozone NAAQS Cross-State Air Pollution Rule Proposal

EPA Pesticide Factsheets

In this technical support document (TSD) we describe the air quality modeling performed to support the proposed Cross-State Air Pollution Rule for the 2008 ozone National Ambient Air Quality Standards (NAAQS)

Air Quality Modeling Technical Support Document for the 2015 Ozone NAAQS Preliminary Interstate Transport Assessment

EPA Pesticide Factsheets

In this technical support document (TSD) EPA describes the air quality modeling performed to support the 2015 ozone National Ambient Air Quality Standards (NAAQS) preliminary interstate transport assessment Notice of Data Availability (NODA).

State of practice and emerging application of analytical techniques of nuclear forensic analysis: highlights from the 4th Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group (ITWG)

DOE PAGES

Schwantes, Jon M.; Marsden, Oliva; Pellegrini, Kristi L.

2016-09-16

The Nuclear Forensics International Technical Working Group (ITWG) recently completed its fourth Collaborative Materials Exercise (CMX-4) in the 21 year history of the Group. This was also the largest materials exercise to date, with participating laboratories from 16 countries or international organizations. Moreover, exercise samples (including three separate samples of low enriched uranium oxide) were shipped as part of an illicit trafficking scenario, for which each laboratory was asked to conduct nuclear forensic analyses in support of a fictitious criminal investigation. In all, over 30 analytical techniques were applied to characterize exercise materials, for which ten of those techniques weremore » applied to ITWG exercises for the first time. We performed an objective review of the state of practice and emerging application of analytical techniques of nuclear forensic analysis based upon the outcome of this most recent exercise is provided.« less

State of practice and emerging application of analytical techniques of nuclear forensic analysis: highlights from the 4th Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group (ITWG)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwantes, Jon M.; Marsden, Oliva; Pellegrini, Kristi L.

The Nuclear Forensics International Technical Working Group (ITWG) recently completed its fourth Collaborative Materials Exercise (CMX-4) in the 21 year history of the Group. This was also the largest materials exercise to date, with participating laboratories from 16 countries or international organizations. Moreover, exercise samples (including three separate samples of low enriched uranium oxide) were shipped as part of an illicit trafficking scenario, for which each laboratory was asked to conduct nuclear forensic analyses in support of a fictitious criminal investigation. In all, over 30 analytical techniques were applied to characterize exercise materials, for which ten of those techniques weremore » applied to ITWG exercises for the first time. We performed an objective review of the state of practice and emerging application of analytical techniques of nuclear forensic analysis based upon the outcome of this most recent exercise is provided.« less

Big Data Challenges in Climate Science: Improving the Next-Generation Cyberinfrastructure

NASA Technical Reports Server (NTRS)

Schnase, John L.; Lee, Tsengdar J.; Mattmann, Chris A.; Lynnes, Christopher S.; Cinquini, Luca; Ramirez, Paul M.; Hart, Andre F.; Williams, Dean N.; Waliser, Duane; Rinsland, Pamela;

Application of Human Factors Methods to Design Healthcare Work Systems: Instance of the prevention of Adverse Drug Events.

PubMed

Marcilly, Romaric; Beuscart-Zephir, Marie-Catherine

2015-01-01

Human Factors (HF) methods are increasingly needed to support the design of new technologies in order to avoid that introducing those technologies into healthcare work systems induces use errors with potentially catastrophic consequences for the patients. This chapter illustrates the application of HF methods in developing two health technologies aiming at securing the hospital medication management process. Lessons learned from this project highlight the importance of (i) analyzing the work system in which the technology is intended to be implemented, (ii) involving end users in the design process and (iii) the intermediation role of HF between end users and scientific/technical experts.

Promoting Teachers' Implementation of Classroom-Based Prevention Programming Through Coaching: The Mediating Role of the Coach-Teacher Relationship.

PubMed

Johnson, Stacy R; Pas, Elise T; Bradshaw, Catherine P; Ialongo, Nicholas S

2018-05-01

There is growing awareness of the importance of implementation fidelity and the supports, such as coaching, to optimize it. This study examined how coaching activities (i.e., check-ins, needs assessment, modeling, and technical assistance) related directly and indirectly to implementation dosage and quality of the PAX Good Behavior Game, via a mediating pathway through working relationship. Mediation analyses of 138 teachers revealed direct effects of modeling and working relationship on implementation dosage, whereas needs assessment was associated with greater dosage indirectly, by higher ratings of the working relationship. Understanding how coaching activities promote implementation fidelity elements has implications for improving program effectiveness.

78 FR 45869 - Approval and Promulgation of State Implementation Plans; State of Montana; Interstate Transport...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-30

... of Montana's submission because the submission did not include any technical analysis to support its..., EPA disagrees with that concern. Our technical analysis confirmed that emissions from Montana in total... irrelevant factors and lacks any technical analysis to support the State's conclusion with respect to...

76 FR 14835 - Approval and Promulgation of Air Quality Implementation Plan; Missouri; Proposed Disapproval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... the state's conclusion should be supported by an adequate technical analysis. EPA recommended the...)(2)(D)(i)(I) must be supported by an adequate technical analysis.\\5\\ EPA recommended the various..., the state did not further evaluate or demonstrate with a technical analysis that these measures...

76 FR 43167 - Approval and Promulgation of Air Quality Implementation Plan; North Carolina; Disapproval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

... stated that the state's conclusion should be supported by an adequate technical analysis. Second, EPA... revision must be supported by an adequate technical analysis, including, but not limited to, information... disapproval where the Agency states: ``* * * without an adequate technical analysis EPA does not believe that...

76 FR 14831 - Approval and Promulgation of Air Quality Implementation Plan; Kansas; Proposed Disapproval of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-18

... State's conclusion should be supported by an adequate technical analysis. EPA recommended the various...) must be supported by an adequate technical analysis.\\5\\ EPA recommended the various types of... evaluate or demonstrate with a technical analysis that these measures address the requirements of 110(a)(2...

76 FR 43159 - Approval and Promulgation of Air Quality Implementation Plan; Georgia; Disapproval of Interstate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

... stated that the state's conclusion should be supported by an adequate technical analysis. Second, EPA...'' provisions, the state's SIP revision must be supported by an adequate technical analysis, including, but not..., proposed disapproval where the Agency states: ``* * * without an adequate technical analysis EPA does not...

76 FR 43128 - Approval and Promulgation of Air Quality Implementation Plan; Alabama; Disapproval of Interstate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

..., if so, address the impact. The state's conclusion must be supported by an adequate technical analysis...'' provisions, the state's SIP revision must be supported by an adequate technical analysis, including, but not... disapproval where the Agency states: ``* * *without an adequate technical analysis EPA does not believe that...

Design Study for Project on Standard Operating Procedures for Technical Library Services.

ERIC Educational Resources Information Center

Libbey, Miles A.; And Others

The overall objective of the Technical Information Support Activities (TISA) Project is the production of a "Post Commander's Handbook." The handbook will be instrumental in achieving greater utilization of available technical information resources to assist army scientists and engineers engaged in the support of army combat and other…

Computer Supported Education at Fox Valley Technical Institute. IBM Application Brief.

ERIC Educational Resources Information Center

International Business Machines Corp., White Plains, NY.

Fox Valley Technical Institute (FVTI) has developed an approach to education which emphasizes competency-based, round-the-clock education entailing short terms, flexible class schedules, and individualized instruction and which has as its focus strong computer support at classroom, technical, and management levels. The college provides 6,000…

Testing Services

NASA Technical Reports Server (NTRS)

1993-01-01

Trace Laboratories is an independent testing laboratory specializing in testing printed circuit boards, automotive products and military hardware. Technical information from NASA Tech Briefs and two subsequent JPL Technical Support packages have assisted Trace in testing surface insulation resistance on printed circuit board materials. Testing time was reduced and customer service was improved because of Jet Propulsion Laboratory technical support packages.

Research and Technology 1995

NASA Technical Reports Server (NTRS)

1996-01-01

This report selectively summarizes the NASA Lewis Research Center's research and technology accomplishments for fiscal year 1995. It comprises over 150 short articles submitted by the staff members of the technical directorates. The report is organized into six major sections: aeronautics, aerospace technology, space flight systems, engineering support, Lewis Research Academy, and technology transfer. A table of contents, an author index, and a list of NASA Headquarters program offices have been included to assist the reader in finding articles of special interest. This report is not intended to be a comprehensive summary of all research and technology work done over the past fiscal year. Most of the work is reported in Lewis-published technical reports, journal articles, and presentations prepared by Lewis staff members and contractors (for abstracts of these Lewis-authored reports, visit the Lewis Technical Report Server (LETRS) on the World Wide Web-http://letrs.lerc.nasa.gov/LeTRS/). In addition, university grants have enabled faculty members and graduate students to engage in sponsored research that is reported at technical meetings or in journal articles. For each article in this report, a Lewis contact person has been identified, and where possible, reference documents are listed so that additional information can be easily obtained. The diversity of topics attests to the breadth of research and technology being pursued and to the skill mix of the staff that makes it possible. For more information about Lewis' research, visit us on the World Wide web-http://www.lerc.nasa.gov.

NASA Technical Management Report (533Q)

NASA Technical Reports Server (NTRS)

Klosko, S. M.; Sanchez, B. (Technical Monitor)

2001-01-01

The objective of this task is analytical support of the NASA Satellite Laser Ranging (SLR) program in the areas of SLR data analysis, software development, assessment of SLR station performance, development of improved models for atmospheric propagation and interpretation of station calibration techniques, and science coordination and analysis functions for the NASA led Central Bureau of the International Laser Ranging Service (ILRS). The contractor shall in each year of the five year contract: (1) Provide software development and analysis support to the NASA SLR program and the ILRS. Attend and make analysis reports at the monthly meetings of the Central Bureau of the ILRS covering data received during the previous period. Provide support to the Analysis Working Group of the ILRS including special tiger teams that are established to handle unique analysis problems. Support the updating of the SLR Bibliography contained on the ILRS web site; (2) Perform special assessments of SLR station performance from available data to determine unique biases and technical problems at the station; (3) Develop improvements to models of atmospheric propagation and for handling pre- and post-pass calibration data provided by global network stations; (4) Provide review presentation of overall ILRS network data results at one major scientific meeting per year; (5) Contribute to and support the publication of NASA SLR and ILRS reports highlighting the results of SLR analysis activity.

What effects have resident work-hour changes had on education, quality of life, and safety? A systematic review.

PubMed

Harris, Joshua D; Staheli, Greg; LeClere, Lance; Andersone, Diana; McCormick, Frank

2015-05-01

More than 15 years ago, the Institute of Medicine (IOM) identified medical error as a problem worthy of greater attention; in the wake of the IOM report, numerous changes were made to regulations to limit residents' duty hours. However, the effect of resident work-hour changes remains controversial within the field of orthopaedics. We performed a systematic review to determine whether work-hour restrictions have measurably influenced quality-of-life measures, operative and technical skill development, resident surgical education, patient care outcomes (including mortality, morbidity, adverse events, sentinel events, complications), and surgeon and resident attitudes (such as perceived effect on learning and training experiences, personal benefit, direct clinical experience, clinical preparedness). We performed a systematic review of PubMed, Scopus, CINAHL (Cumulative Index to Nursing and Allied Health Literature), and Google Scholar using PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. Inclusion criteria were any English language peer-reviewed articles that analyzed the effect(s) of orthopaedic surgery resident work-hour restrictions on patient safety, resident education, resident/surgeon quality of life, resident technical operative skill development, and resident surgeon attitudes toward work-hour restrictions. Eleven studies met study inclusion criteria. One study was a prospective analysis, whereas 10 studies were of level IV evidence (review of surgical case logs) or survey results. Within our identified studies, there was some support for improved resident quality of life, improved resident sleep and less fatigue, a perceived negative impact on surgical operative and technical skill, and conflicting evidence on the topic of resident education, patient outcomes, and variable attitudes toward the work-hour changes. There is a paucity of high-level or clear evidence evaluating the effect of the changes to resident work hours. Future research in this area should focus on objective measures that include patient safety as a primary outcome.

Site Guidelines for a "Making Middle Grades Work" Technical Review Visit

ERIC Educational Resources Information Center

Southern Regional Education Board, 2004

2004-01-01

The purpose of the Technical Review Visit (TRV) is to follow up on the actions taken to implement the recommendations indicated for each challenge in the most recent Technical Assistance Visit (TAV) report. This document provides the following: (1) Site Guidelines for the Making Middle Grades Work (MMGW) Technical Review Visit; (2) Site Checklist;…

Work Values and Job Satisfaction of Arkansas Business Educators in Secondary Systems and Community/Technical Colleges.

ERIC Educational Resources Information Center

Funderburg, Dinnah L.; Kapes, Jerome T.

The work values and job satisfaction of Arkansas business educators in secondary school systems and community/technical colleges were examined through a survey of a random sample of 129 of Arkansas' 926 secondary and community/technical college business educators. Of those teachers sent surveys (67 secondary and 62 community/technical college…

75 FR 68606 - Chetco River Gravel Mining Executive and Technical Teams; Notification of Availability of Documents.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-08

... Executive and Technical Teams; Notification of Availability of Documents. AGENCY: U.S. Army Corps of... public all work products of the Chetco River Gravel Mining Executive and Technical Teams. These work... INFORMATION: The Executive and Technical Teams were established in 2007 as part of an initiative to evaluate...

78 FR 78939 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-27

... Quantity or Quantities of Articles or Services under Consideration for Purchase: C-130J technical, engineering and software support; software updates and patches; familiarization training for Portable Flight... and contractor technical support services; and other related elements of logistics and program support...

Learning experience of Chinese nursing students in an online clinical English course: qualitative study.

PubMed

Tang, Anson C Y; Wong, Nick; Wong, Thomas K S

2015-02-01

The low English proficiency of Chinese nurse/nursing students affects their performance when they work in English-speaking countries. However, limited resources are available to help them improve their workplace English, i.e. English used in a clinical setting. To this end, it is essential to look for an appropriate and effective means to assist them in improving their clinical English. The objective of this study is to evaluate the learning experience of Chinese nursing students after they have completed an online clinical English course. Focus group interview was used to explore their learning experience. 100 students in nursing programs at Tung Wah College were recruited. The inclusion criteria were: (1) currently enrolled in a nursing program; and (2) having clinical experience. Eligible participants self-registered for the online English course, and were required to complete the course within 3 months. After that, semi-structured interviews were conducted on students whom completed the whole and less than half of the course. One of the researchers joined each of the interviews as a facilitator and an observer. Thematic analysis was used to analyze the data. Finally, 7 themes emerged from the interviews: technical issues, adequacy of support, time requirement, motivation, clarity of course instruction, course design, and relevancy of the course. Participants had varied opinions on the 2 themes: motivation and relevancy of the course. Overall, results of this study suggest that the online English course helped students improve their English. Factors which support their learning are interactive course design, no time constraint, and relevancy to their work/study. Factors which detracted from their learning are poor accessibility, poor technical and learning support and no peer support throughout the course. Copyright © 2014. Published by Elsevier Ltd.

Incorporating a collaborative web-based virtual laboratory in an undergraduate bioinformatics course.

PubMed

Weisman, David

2010-01-01

Face-to-face bioinformatics courses commonly include a weekly, in-person computer lab to facilitate active learning, reinforce conceptual material, and teach practical skills. Similarly, fully-online bioinformatics courses employ hands-on exercises to achieve these outcomes, although students typically perform this work offsite. Combining a face-to-face lecture course with a web-based virtual laboratory presents new opportunities for collaborative learning of the conceptual material, and for fostering peer support of technical bioinformatics questions. To explore this combination, an in-person lecture-only undergraduate bioinformatics course was augmented with a remote web-based laboratory, and tested with a large class. This study hypothesized that the collaborative virtual lab would foster active learning and peer support, and tested this hypothesis by conducting a student survey near the end of the semester. Respondents broadly reported strong benefits from the online laboratory, and strong benefits from peer-provided technical support. In comparison with traditional in-person teaching labs, students preferred the virtual lab by a factor of two. Key aspects of the course architecture and design are described to encourage further experimentation in teaching collaborative online bioinformatics laboratories. Copyright © 2010 International Union of Biochemistry and Molecular Biology, Inc.

Scientific and Technical Support for the Galileo Net Flux Radiometer Experiment

NASA Technical Reports Server (NTRS)

Sromovsky, Lawrence A.

1997-01-01

This report describes work in support of the Galileo Net Flux Radiometer (NFR), an instrument mounted on the Galileo probe, a spacecraft designed for entry into and direct measurements of Jupiter's atmosphere. Tasks originally proposed for the post launch period are briefly as follows: attend and support PSG (Project Science Group) and other project science meetings; support in-flight checkouts; maintain and keep safe the spare instrument and GSE (Ground Support Equipment); organize and maintain documentation; finish NFR calibration measurements, documentation, and analysis; characterize and diagnose instrument anomalies; develop descent data analysis tools; and science data analysis and publication. Because we had the capability to satisfy a project support need we also subsequently proposed and were funded to make ground- based observations of Jupiter during the period surrounding the Galileo arrival at Jupiter, using the Swedish Solar Telescope at La Palma, Canary Islands. The following section (11) provides background information on the NFR instrument.

Are general surgeons able to accurately self-assess their level of technical skills?

PubMed

Rizan, C; Ansell, J; Tilston, T W; Warren, N; Torkington, J

2015-11-01

Self-assessment is a way of improving technical capabilities without the need for trainer feedback. It can identify areas for improvement and promote professional medical development. The aim of this review was to identify whether self-assessment is an accurate form of technical skills appraisal in general surgery. The PubMed, MEDLINE(®), Embase(™) and Cochrane databases were searched for studies assessing the reliability of self-assessment of technical skills in general surgery. For each study, we recorded the skills assessed and the evaluation methods used. Common endpoints between studies were compared to provide recommendations based on the levels of evidence. Twelve studies met the inclusion criteria from 22,292 initial papers. There was no level 1 evidence published. All papers compared the correlation between self-appraisal versus an expert score but differed in the technical skills assessment and the evaluation tools used. The accuracy of self-assessment improved with increasing experience (level 2 recommendation), age (level 3 recommendation) and the use of video playback (level 3 recommendation). Accuracy was reduced by stressful learning environments (level 2 recommendation), lack of familiarity with assessment tools (level 3 recommendation) and in advanced surgical procedures (level 3 recommendation). Evidence exists to support the reliability of self-assessment of technical skills in general surgery. Several variables have been shown to affect the accuracy of self-assessment of technical skills. Future work should focus on evaluating the reliability of self-assessment during live operating procedures.

Space Environments and Spacecraft Effects Concept: Transitioning Research to Operations and Applications

NASA Technical Reports Server (NTRS)

Edwards, D. L.; Burns, H. D.; Clinton, R. G.; Schumacher, D.; Spann, J. F.

2012-01-01

The National Aeronautics and Space Administration (NASA) is embarking on a course to expand human presence beyond Low Earth Orbit (LEO) while expanding its mission to explore the solar system. Destinations such as Near Earth Asteroids (NEA), Mars and its moons, and the outer planets are but a few of the mission targets. NASA has established numerous organizations specializing in specific space environments disciplines that will serve to enable these missions. To complement these existing discipline organizations, a concept is presented focusing on the development of a space environment and spacecraft effects organization. This includes space climate, space weather, natural and induced space environments, and effects on spacecraft materials and systems. This space environment and spacecraft effects organization would be comprised of Technical Working Groups (TWG) focusing on, for example: a) Charged Particles (CP), b) Space Environmental Effects (SEE), and c) Interplanetary and Extraterrestrial Environments (IEE). These technical working groups will generate products and provide knowledge supporting four functional areas: design environments, environment effects, operational support, and programmatic support. The four functional areas align with phases in the program mission lifecycle and are briefly described below. Design environments are used primarily in the mission concept and design phases of a program. Environment effects focuses on the material, component, sub-system and system-level selection and the testing to verify design and operational performance. Operational support provides products based on real time or near real time space weather observations to mission operators to aid in real time and near-term decision-making. The programmatic support function maintains an interface with the numerous programs within NASA and other federal agencies to ensure that communications are well established and the needs of the programs are being met. The programmatic support function also includes working in coordination with the program in anomaly resolution and generation of lesson learned documentation. The goal of this space environment and spacecraft effects organization is to develop decision-making tools and engineering products to support the mission phases of mission concept through operations by focusing on transitioning research to application. Products generated by this space environments and spacecraft effects organization are suitable for use in anomaly investigations. This paper will describe the organizational structure for this space environments and spacecraft effects organization, and outline the scope of conceptual TWG's and their relationship to the functional areas.

Reply to "Comment on `Particle path through a nested Mach-Zehnder interferometer' "

NASA Astrophysics Data System (ADS)

Griffiths, Robert B.

2018-02-01

While much of the technical analysis in the preceding Comment is correct, in the end it confirms the conclusion reached in my previous work [Phys. Rev. A 94, 032115 (2016), 10.1103/PhysRevA.94.032115]: A consistent histories analysis provides no support for the claim of counterfactual quantum communication put forward by Salih et al. [Phys. Rev. Lett. 110, 170502 (2013), 10.1103/PhysRevLett.110.170502].

A Pattern for Increased Monitoring for Intellectual Property Theft by Departing Insiders

DTIC Science & Technology

2012-04-01

2012 TECHNICAL REPORT CMU/SEI-2012-TR-008 ESC-TR-2012-008 CERT® Program http://www.sei.cmu.edu SEI markings v3.2 / 30 August 2011... Programs Conference (PLoP) 2011 (http://www.hillside.net/plop/2011/). This material is based upon work funded and supported by the United States...research project at the CERT® Program is identifying enterprise architectural patterns to protect against the insider threat to organizations. This

JPRS Report, Science & Technology, USSR: Science & Technology Policy

DTIC Science & Technology

1990-09-18

Ye. Ponarina; POISK, 22-28 Jun 90] .. ■ ■ 7 People’s Deputies Propose Scientific- Industrial Union [SOVETSKAYA ROSSIYA, 18 May 90] 10...achievements of science and tech- nology in industry and other spheres of life, and for material and technical and financial support for the planned work, and...low: even in machine building it does not exceed 40 percent. Due to the slow penetration in industry of new techno- logical processes and systems

In the Green Desert: Non-formal Distance Education Project for Nomadic Women of the Gobi Desert, Mongolia. Education for All: Making It Work. Innovations Series, 12.

ERIC Educational Resources Information Center

Robinson, Bernadette

With the disintegration of the former Soviet Union, Mongolia was severed from its exterior financial and technical support. The dramatic shift in socioeconomic conditions created a need for new forms of adult education. The nomadic women of the Gobi Desert were targeted as most at risk, and the Gobi Women's Project conducted a needs assessment in…

The global Filipino nurse: An integrative review of Filipino nurses' work experiences.

PubMed

Montayre, Jed; Montayre, Jasmine; Holroyd, Eleanor

2018-05-01

To understand the work-related experiences of Philippine-trained nurses working globally. The Philippines is a major source country of foreign-trained nurses located globally. However, there is paucity of research on professional factors and career related issues affecting foreign-trained nurses' work experiences. An integrative review through a comprehensive search of literature was undertaken from November 2015 and was repeated in August 2016. Seven articles satisfied the selection criteria. Filipino nurses experienced differences in the practice of nursing in terms of work process, roles and autonomy. Moreover, they encountered challenges such as work-related discrimination and technical difficulties within the organisation. A clear understanding of Filipino nurses' work experiences and the challenges they have encountered suggests identification of important constructs influencing effective translation of nursing practice across cultures and health systems, which then form the basis for support strategies. It is critical to recognize foreign-trained nurses' experience of work-related differences and challenges as these foster favorable conditions for the management team to plan and continually evaluate policies around recruitment, retention and support offered to these nurses. Furthermore, findings suggest internationalization of nursing framework and standards integrating a transcultural paradigm among staff members within a work organisation. © 2017 John Wiley & Sons Ltd.

76 FR 4579 - Approval and Promulgation of Air Quality Implementation Plan; New Jersey and New York...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-26

... supported by an adequate technical analysis. EPA recommended the various types of information that could be...) must be supported by an adequate technical analysis. In the 2009 Guidance, EPA recommended the various...) because the State did not evaluate or demonstrate with a technical analysis that the emissions reduction...

76 FR 4584 - Approval and Promulgation of Air Quality Implementation Plans; Georgia; Disapproval of Interstate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-26

... conclusion must be supported by an adequate technical analysis. Second, EPA recommended the various types of... requirement of section 110(a)(2)(D)(i)(I) must be supported by an adequate technical analysis. Additionally... evaluate or demonstrate with a technical analysis that this measure and their intention to rely to the...

78 FR 11124 - EPA Responses to State and Tribal 2010 Sulfur Dioxide Designation Recommendations: Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-15

... supporting technical analyses, can be found on the EPA's Internet Web site at http://www.epa.gov... you for clarification due to technical difficulties, the EPA may not be able to consider your input... possible in supporting your views. Describe any assumptions and provide any technical information and/or...

Designing for human presence in space: An introduction to environmental control and life support systems

NASA Technical Reports Server (NTRS)

Wieland, Paul

1994-01-01

Human exploration and utilization of space requires habitats to provide appropriate conditions for working and living. These conditions are provided by environmental control and life support systems (ECLSS) that ensure appropriate atmosphere composition, pressure, and temperature; manage and distribute water, process waste matter, provide fire detection and suppression; and other functions as necessary. The functions that are performed by ECLSS are described and basic information necessary to design an ECLSS is provided. Technical and programmatic aspects of designing and developing ECLSS for space habitats are described including descriptions of technologies, analysis methods, test requirements, program organization, documentation requirements, and the requirements imposed by medical, mission, safety, and system needs. The design and development process is described from initial trade studies through system-level analyses to support operation. ECLSS needs for future space habitats are also described. Extensive listings of references and related works provide sources for more detailed information on each aspect of ECLSS design and development.

The Future of the U.S. Nuclear Weapons Program

NASA Astrophysics Data System (ADS)

Brooks, Linton F.

2007-03-01

This paper will examine our plans for the future of the U.S. nuclear weapons program including efforts to ``transform'' the stockpile and supporting infrastructure. We proceed from the premise that the United States will need a safe, secure, and reliable nuclear deterrent for the foreseeable future. Moreover, the Stockpile Stewardship Program is working. Today's stockpile---comprised of legacy warheads left over from the Cold War---is safe and reliable. That said, we see increased risk, absent nuclear testing, in assuring the long-term safety and reliability of our current stockpile. Nor is today's nuclear weapons complex sufficiently ``responsive'' to fixing technical problems in the stockpile, or to potential adverse geopolitical change. Our task is to work to ensure that the U.S. nuclear weapons enterprise, including the stockpile and supporting infrastructure, meets long-term national security needs. Our approach is to develop and field replacement warheads for the legacy stockpile---so-called Reliable Replacement Warheads (RRW)---as a means to transform both the nuclear stockpile and supporting infrastructure.

Implementation Plan for Qualification of Sodium-Cooled Fast Reactor Technology Information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Wayne; Honma, George

This document identifies and discusses implementation elements that can be used to facilitate consistent and systematic evaluation processes relating to quality attributes of technical information (with focus on SFR technology) that will be used to support licensing of advanced reactor designs. Information may include, but is not limited to, design documents for SFRs, research-and-development (R&D) data and associated documents, test plans and associated protocols, operations and test data, international research data, technical reports, and information associated with past U.S. Nuclear Regulatory Commission (NRC) reviews of SFR designs. The approach for determining acceptability of test data, analysis, and/or other technical informationmore » is based on guidance provided in INL/EXT-15-35805, “Guidance on Evaluating Historic Technology Information for Use in Advanced Reactor Licensing.” The implementation plan can be adopted into a working procedure at each of the national laboratories performing data qualification, or by applicants seeking future license application for advanced reactor technology.« less

Proceedings of the workshop "Development of biological decision support systems for resource managers": Denver, Colorado, October 27-29, 1998

USGS Publications Warehouse

Getter, James; D'Erchia, Terry D.; Root, Ralph; Getter, James; D'Erchia, Terry D.; Root, Ralph

1999-01-01

The format for this 3-day workshop (27-29 October 1998) included plenary presentations by USGS Biological Resources Division (BRD) and U.S. Fish and Wildlife Service per onnel who u e and develop decision support systems (DSS); breakout ses ions addressing DSS technical information aspect , outreach/ customer requirements, and future perspectives; and a DSS Steering Committee meeting to evaluate work hop goals and to provide guidance for fu ture efforts. Steering committee action item developed from workshop inputs were to ( I) develop a "DSS framework" document for u e in biological research. (2) develop a "proof of concept" DSS based upon the framework document, and (3) integrate decision support ystem into BRD program elements.

Regenerative Environmental Control and Life Support System Diagram

NASA Technical Reports Server (NTRS)

2000-01-01

This diagram shows the flow of recyclable resources in the International Space Station (ISS). The Environmental Control and Life Support System (ECLSS) Group of the Flight Projects Directorate at the Marshall Space Flight Center is responsible for the regenerative ECLSS hardware, as well as providing technical support for the rest of the system. The regenerative ECLSS, whose main components are the Water Recovery System (WRS), and the Oxygen Generation System (OGS), reclaims and recycles water and oxygen. The ECLSS maintains a pressurized habitation environment, provides water recovery and storage, maintains and provides fire detection / suppression, and provides breathable air and a comfortable atmosphere in which to live and work within the ISS. The ECLSS hardware will be located in the Node 3 module of the ISS.

Engineering Technical Support Center Annual Report Fiscal Year 2014; Technical Support and Innovative Research for Contaminated Sites

EPA Science Inventory

This report highlights significant projects that the ETSC has supported throughout fiscal year 2014. Projects have addressed an array of environmental scenarios, including but not limited to remote mining contamination, expansive landfill waste, sediment remediation by capping, ...

Urban Rail Supporting Technology Program Fiscal Year 1974 Year End Summary

DOT National Transportation Integrated Search

1975-03-01

Major areas include program management, technical support and application engineering, facilities development, test and evaluation, and technology development. Specific technical discussion includes track measurement systems; UMTA facilities developm...

Towards a virtual health record for mobile home care of elderly citizens.

PubMed

Koch, Sabine; Hägglund, Maria; Scandurra, Isabella; Moström, Dennis

2004-01-01

Mobile work situations within home care of the elderly require immediate and ubiquitous access to patient-oriented data. The ongoing Swedish research project "Technical support for Mobile CloseCare" focuses on the development and evaluation of work-scenario oriented ICT support for enhanced home care of elderly citizens. The aim of the project is to provide a seamless and consistent information flow between different health care providers and to give intuitive access to information services for the elderly and their relatives. For that purpose, different independent software components are connected through a mobile communication platform. Flexible access to prioritized information for different users in different work situations will be given through a virtual health record. In order to obtain both usable and clinically relevant results, a user centered system development approach is followed. Evaluation of the project results will be based on usability tests and quasi-experimental studies on how system implementation influences quality of care and job- and life satisfaction for care providers, patients and relatives.

Solar Technical Assistance Team Webinars | State, Local, and Tribal

Science.gov Websites

Governments | NREL Solar Technical Assistance Team Webinars Solar Technical Assistance Team Webinars NREL's Solar Technical Assistance Team (STAT), with support from the U.S. Department of Energy

Effects of Demographic Characteristics, Educational Background, and Supporting Factors on ICT Readiness of Technical and Vocational Teachers in Malaysia

ERIC Educational Resources Information Center

Alazzam, Abu-Obaideh; Bakar, Ab Rahim; Hamzah, Ramlah; Asimiran, S.

2012-01-01

The aim of this study was to examine ICT readiness and the effects of demographic characteristics, educational background, and support factors on the ICT readiness of technical and vocational teachers in Malaysia. The questionnaire was administered to 329 technical and vocational teachers who are teaching engineering subjects in Malaysian…

Engineering Technical Support Center Annual Report Fiscal Year 2013; Technical Support and Innovative Research for Contaminated Sites

EPA Science Inventory

This report summarizes a variety of significant projects that the ETSC, located in the Land Remediation and Pollution Control Division (LRPCD), National Risk Management Research Laboratory (NRMRL), has supported throughout fiscal year 2013. Projects have addressed an array of env...

Technical Support Services for the Office of Naval Research Littoral Warfare Advanced Development Project

DTIC Science & Technology

2005-09-30

Technical Support Services for the Office of Naval Research Littoral Warfare Advanced Development Project William R. Metzger Marine...Support Services for the Office of Naval Research Littoral Warfare Advanced Development Project 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT

77 FR 28393 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Initial Review

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

... Support Post Earthquake Reconstruction, Cholera and HIV/AIDS Response, FOA GH12-001, and Research and Technical Assistance for Public Health Laboratories in Haiti to Support Post Earthquake Reconstruction... and Technical Assistance for Public Health Interventions in Haiti to Support Post Earthquake...

Gender, Technology, and the History of Technical Communication.

ERIC Educational Resources Information Center

Durack, Katherine T.

1997-01-01

Considers why women have been absent from the history of technical communication. Discusses research from the history of technology suggesting that notions of "technology,""work," and "workplace" may be gendered terms. Concludes with several suggestions for defining technical communication so that significant works of…

Technical skills requirement of Indonesian construction labors to work in Malaysia

NASA Astrophysics Data System (ADS)

Adi, Henny Pratiwi

2017-03-01

Labors skills is an important part of construction projects implementation. Suitability between the skills possessed by labors with the skills needed by user is required to increase employment opportunities. Malaysia is a country that using construction labors from Indonesia. This study aims to get the kind of technical skills required by users of Indonesian constructian labors in Malaysia and also the importance level of technical skills. Data collecting in this research was conducted through interviews and questionnaires on contractors in Malaysia. The next stage was determine the importance level of technical skills in work field of carpenter, bricklayer, plumber and painters. The importance level of technical skills analyzed using the Relative Importance Index (RII). The results showed that mastering the operation of both instruments either manually or electrically is the most importance in the technical skills. Therefore, an understanding of the types of equipment for work field and the manner of operation is need to had by Indonesian construction labors who will work in Malaysia.

Draft secure medical database standard.

PubMed

Pangalos, George

2002-01-01

Medical database security is a particularly important issue for all Healthcare establishments. Medical information systems are intended to support a wide range of pertinent health issues today, for example: assure the quality of care, support effective management of the health services institutions, monitor and contain the cost of care, implement technology into care without violating social values, ensure the equity and availability of care, preserve humanity despite the proliferation of technology etc.. In this context, medical database security aims primarily to support: high availability, accuracy and consistency of the stored data, the medical professional secrecy and confidentiality, and the protection of the privacy of the patient. These properties, though of technical nature, basically require that the system is actually helpful for medical care and not harmful to patients. These later properties require in turn not only that fundamental ethical principles are not violated by employing database systems, but instead, are effectively enforced by technical means. This document reviews the existing and emerging work on the security of medical database systems. It presents in detail the related problems and requirements related to medical database security. It addresses the problems of medical database security policies, secure design methodologies and implementation techniques. It also describes the current legal framework and regulatory requirements for medical database security. The issue of medical database security guidelines is also examined in detailed. The current national and international efforts in the area are studied. It also gives an overview of the research work in the area. The document also presents in detail the most complete to our knowledge set of security guidelines for the development and operation of medical database systems.

Forging Partnership: CRDF in the FSU and the World

NASA Astrophysics Data System (ADS)

Owens, Tom

2006-04-01

The founding legislation to facilitate non-proliferation, and to advance U.S. scientific, technical and human health objectives as well as U.S. foreign policy generally -- but also from private sources, to advance primarily humanitarian and educational goals. CRDF's experience melding public and private support for international scientific cooperation has yielded a unique set of procedures and programs that it seeks now to apply in new geographic arenas. Public Law 102-511 ``Freedom Support Act,'' Section 511, October 24, 1992 for CRDF clearly intended the organization to combine public and private purposes, and that it could and should receive funding from both public and private sources. It also gave CRDF specific formal Purposes that included building international partnerships for supporting high-quality research, helping weapons scientists find another line of work, and helping American industry and foreign scientists to work together for mutual benefit and economic progress. CRDF was expected to ``promote and support joint research and development projects for peaceful purposes between scientists and engineers in the United States and independent states of the former Soviet Union on subjects of mutual interest.'' CRDF has operated as a private foundation funding international research collaborations through peer-reviewed competitions, making more than 2,000 awards in ten years. It has carried out this work with resources provided largely by the U.S. government.

Review of Technical Studies in the United States in Support of Burnup Credit Regulatory Guidance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, John C; Parks, Cecil V; Mueller, Don

2010-01-01

Taking credit for the reduction in reactivity associated with fuel depletion can enable more cost-effective, higher-density storage, transport, disposal, and reprocessing of spent nuclear fuel (SNF) while maintaining sufficient subcritical margin to establish an adequate safety basis. Consequently, there continues to be considerable interest in the United States (U.S.), as well as internationally, in the increased use of burnup credit in SNF operations, particularly related to storage, transport, and disposal of commercial SNF. This interest has motivated numerous technical studies related to the application of burnup credit, both domestically and internationally, as well as the design of SNF storage, transportmore » and disposal systems that rely on burnup credit for maintaining subcriticality. Responding to industry requests and needs, the U.S. Nuclear Regulatory Commission (NRC) initiated a burnup credit research program in 1999, with support from the Oak Ridge National Laboratory (ORNL), to develop regulatory guidance and the supporting technical bases for allowing and expanding the use of burnup credit in pressurized-water reactor SNF storage and transport applications. Although this NRC research program has not been continuous since its inception, considerable progress has been achieved in many key areas in terms of increased understanding of relevant phenomena and issues, availability of relevant information and data, and subsequently updated regulatory guidance for expanded use of burnup credit. This paper reviews technical studies performed by ORNL for the U.S. NRC burnup credit research program. Examples of topics include reactivity effects associated with reactor operating characteristics, fuel assembly characteristics, burnable absorbers, control rods, spatial burnup distributions, cooling time, and assembly misloading; methods and data for validation of isotopic composition predictions; methods and data for validation of criticality calculations; and operational issues and data related to assembly burnup confirmation. The objective of this paper is to summarize the work and significant accomplishments, with references to the technical reports and publications for complete details, and provide a useful resource to others in the burnup credit community.« less

Space platform expendables resupply concept definition study. Volume 3: Work breakdown structure and work breakdown structure dictionary

NASA Technical Reports Server (NTRS)

1984-01-01

The work breakdown structure (WBS) for the Space Platform Expendables Resupply Concept Definition Study is described. The WBS consists of a list of WBS elements, a dictionary of element definitions, and an element logic diagram. The list and logic diagram identify the interrelationships of the elements. The dictionary defines the types of work that may be represented by or be classified under each specific element. The Space Platform Expendable Resupply WBS was selected mainly to support the program planning, scheduling, and costing performed in the programmatics task (task 3). The WBS is neither a statement-of-work nor a work authorization document. Rather, it is a framework around which to define requirements, plan effort, assign responsibilities, allocate and control resources, and report progress, expenditures, technical performance, and schedule performance. The WBS element definitions are independent of make-or-buy decisions, organizational structure, and activity locations unless exceptions are specifically stated.

Pathfinder Technologies Specialist, X-37

NASA Technical Reports Server (NTRS)

French, James R.

2001-01-01

The X-37 is a technology demonstrator sponsored by NASA. It includes a number of experiments both imbedded (i.e., essential aspects of the vehicle) and separate. The technologies demonstrated will be useful in future operational versions as well as having broad applications to other programs. Mr. James R. French, of JRF Engineering Services and as a consultant to SAIC, has provided technical support to the X-37 NASA Program office since the beginning of the program. In providing this service, Mr. French has maintained close contact with the Boeing Seal Beach and Rocketdyne technical teams via telephone, e-mail, and periodic visits. His interfaces were primarily with the working engineers in order to provide NASA sponsors with a different view than that achieved through management channels. Mr. French's periodic and highly detailed technical reports were submitted to NASA and SAIC (Science Applications International Corporation) on a weekly/monthly basis. These reports addressed a wide spectrum of programmatic and technical interests related to the X-37 Program including vehicle design, flight sciences, propulsion, thermal protection, Guidance Navigation & Control (GN&C), structures, and operations. This deliverable is presented as a consolidation of the twelve monthly reports submitted during the Contract's Option Year,

Stirling engine alternatives for the terrestrial solar application

NASA Technical Reports Server (NTRS)

Stearns, J.

1985-01-01

The first phase of the present study of Stirling engine alternatives for solar thermal-electric generation has been completed. Development risk levels are considered to be high for all engines evaluated. Free-piston type and Ringbom-type Stirling engine-alternators are not yet developed for the 25 to 50-kW electrical power range, although smaller machines have demonstrated the inherent robustness of the machines. Kinematic-type Stirling engines are presently achieving a 3500 hr lifetime or longer on critical components, and lifetime must still be further extended for the solar application. Operational and technical characteristics of all types of Stirling engines have been reviewed with engine developers. Technical work of merit in progress in each engine development organization should be recognized and supported in an appropriate manner.

Work-related stress in the veterinary profession in New Zealand.

PubMed

Gardner, D H; Hini, D

2006-06-01

To investigate sources of work-related stress in the veterinary profession in New Zealand, perceptions of levels of stress being experienced, and the social support that veterinarians are using to manage work-related stress. A postal survey was distributed to 1,907 veterinarians registered with the Veterinary Council of New Zealand (VCNZ). The survey collected information on respondents' age, gender, type and number of people in the workplace, stress levels, depression, suicidal thoughts and attempts, causes of stress and sources of support. Nine hundred and twenty-seven (48.6%) veterinarians returned useable responses. Veterinarians who were retired, working overseas or did not provide information about their type of work were excluded from the analysis, leaving data from 849 (44.5%) veterinarians. Women experienced more work-related stress and depression than men, veterinarians in small animal/mixed practice reported more stress and depression than those in other types of work, and younger veterinarians experienced higher levels of stress than older veterinarians. The main sources of stress were hours worked, client expectations, and unexpected outcomes. Respondents were also stressed by the need to keep up their knowledge and technical skills, and by personal relationships, finances and their expectations of themselves. Most respondents reported that they had good networks of family and friends to help them deal with stress. In general, respondents tended to rely on informal networks such as family and friends, other veterinarians and workmates to provide support. The small proportion of respondents who reported clinical depression or suicidal thoughts or attempts were more likely than respondents in general to have used health professionals, counselling, pastoral/spiritual support and the Vets in Stress phone line, but less likely to have sought support from employers and workmates. There is a need for a wide range of strategies to manage work-related stress among veterinarians. Sources of stress in the workplace must be identified and strategies developed to control those which present a significant hazard. Strategies may include attention to workloads and working hours, design of work processes, and increasing social support. Training in work-related skills such as communication, conflict management and stress management may be helpful where lack of these skills is contributing to stress. Support services such as help lines and mentor schemes are also available and information about these needs to be more accessible.

Planning a DSN support section technical library

NASA Technical Reports Server (NTRS)

Bailey, T.; Chatburn, C. C.

1980-01-01

The planning procedure being used to establish a technical library for the Deep Space Network support section is described. The inventory and survey methods employed are described and the preliminary results of these methods are discussed.

Draft federal GHG accounting and reporting : technical support document

DOT National Transportation Integrated Search

2010-07-01

This is a technical support document (TSD) that accompanies the Federal Greenhouse Gas Accounting and Reporting Guidance (or Guidance). This document provides detailed information on the inventory reporting process and accepted calculation methodolog...

CAD/CAM data management needs, requirements and options

NASA Technical Reports Server (NTRS)

Lopatka, R. S.; Johnson, T. G.

1978-01-01

The requirements for a data management system in support of technical or scientific applications and possible courses of action were reviewed. Specific requirements were evolved while working towards higher level integration impacting all phases of the current design process and through examination of commercially marketed systems and related data base research. Arguments are proposed for varied approaches in implementing data base systems ranging from no action necessary to immediate procurement of an existing data base management system.

Administrative and Technical Support for the U.S. Army Medical Research and Development Command Joint Working Group on Medical Chemical Defense

DTIC Science & Technology

1989-08-01

microproces;qor databaAing systems for monitoring project and contract reports and program technology trans. fers, coordinating and providing administratIvo ...The JWGD 3 annual planning process generally included: - Program review by the JWGD’ membership at quarterly meetings, which consisted of the review...Office developed the program planning and budget documents associated with the planning process outlined above. Program project databases and

Image Transmission via Spread Spectrum Techniques. Part A

DTIC Science & Technology

1976-01-01

Code 408 DR. EDWIN H. WRENCH (714-225-6871) Code 408 and HARPER J. WHITEHOUSE (714:225-6315), Code 4002 Naval Undersea Center San Diego. California...progress report appears in two parts. Part A is a summary of work done in support of this program at the Naval Undersea Center. Part B contains final...a technical description of the bandwidth compression system developed at the Naval Undersea Center. This paper is an excerpt from the specifications

NASA Lunar Impact Monitoring

NASA Technical Reports Server (NTRS)

Suggs, Robert M.; Moser, D. E.

2015-01-01

The MSFC lunar impact monitoring program began in 2006 in support of environment definition for the Constellation (return to Moon) program. Work continued by the Meteoroid Environment Office after Constellation cancellation. Over 330 impacts have been recorded. A paper published in Icarus reported on the first 5 years of observations and 126 calibrated flashes. Icarus: http://www.sciencedirect.com/science/article/pii/S0019103514002243; ArXiv: http://arxiv.org/abs/1404.6458 A NASA Technical Memorandum on flash locations is in press

International non-governmental actors in HIV/AIDS prevention in China.

PubMed

Wu, Feng Shi

2005-01-01

International non-governmental organizations were among the first international actors that responded to the emergence of AIDS crisis in China. Since 1994, the number of international non-governmental organizations and charitable foundations working in AIDS related issue areas in China has grown steadily and substantially. Despite their organizational differences, most of these non-governmental actors present the characteristics of independent mission, localized practice and diverse working focus. Even though they are constrained by financial and other factors compared with multilateral and bilateral official assistance agencies, they have still played a unique role in fighting against AIDS in China as technical experts, public educators, and civil society supporters.

[SWOT Analysis of the National Survey on Current Status of Major Human Parasitic Diseases in China].

PubMed

ZHU, Hui-hui; ZHOU, Chang-hai; CHEN, Ying-dan; ZANG, Wei; XIAO, Ning; ZHOU, Xiao-nong

2015-10-01

The National Survey on Current Status of Major Human Parasitic Diseases in China has been carried out since 2014 under the organization of the National Health and Family Planning Commission of the People's Republic of China. The National Institute of Parasitic Diseases, Chinese Center for Disease Control and Prevention (NIPD, China CDC) provided technical support and was responsible for quality control in this survey. This study used SWOT method to analyze the strengths, weaknesses, opportunities and threats that were encountered by he NIPD, China CDC during the completion of the survey. Accordingly, working strategies were proposed to facilitate the future field work.

OAST space technology accomplishments FY 1991

NASA Technical Reports Server (NTRS)

1992-01-01

The program consists of a continuum of space research and technology activities ranging from initial research to the full scale test of prototype equipment in space. Activities include work that is performed by in-house staff at the NASA Centers, university researchers supported by NASA funded grants and contracts, and industrial aerospace organizations under contract to NASA. These diverse activities provide advances in technology breakthroughs that may revolutionalize a technical discipline or mission concept. The work is managed and coordinated by OAST through a process that integrates the best available talent and capability in NASA, industry, and universities into a National civil space research and technology program.

Current DOT research on the effect of multiple site damage on structural integrity

NASA Technical Reports Server (NTRS)

Tong, P.; Arin, Kemal; Jeong, David Y.; Greif, R.; Brewer, John C.; Bobo, Stephan N.; Sampath, Sam N.

1992-01-01

Multiple site damage (MSD) is a type of cracking that may be found in aging airplanes and which may adversely affect their continuing airworthiness. The Volpe National Transportation Systems Center has supported the Federal Aviation Administration Technical Center on structural integrity research for the past two and half years. The work has focused on understanding the behavior of MSD, detection of MSD during airframe inspection, and the avoidance of MSD in future designs. These three elements of the MSD problem are addressed and a summary of the completed work, the current status, and requirements for future research is provided.

Elaboration of technology organizational models of constructing high-rise buildings in plans of construction organization

NASA Astrophysics Data System (ADS)

Osipenkova, Irina; Simankina, Tatyana; Syrygina, Taisiia; Lukinov, Vitaliy

2018-03-01

This article represents features of the elaboration of technology organizational models of high-rise building construction in technology organizational documentation on the example of the plan of construction organization. Some examples of enhancing the effectiveness of high-rise building construction based on developments of several options of the organizational and technological plan are examined. Qualitative technology organizational documentation allows to increase the competitiveness of construction companies and provides prime cost of construction and assembly works reductions. Emphasis is placed on the necessity to comply with the principle of comprehensiveness of engineering, scientific and research works, development activities and scientific and technical support.

The coevolution of innovation and technical intelligence in primates

PubMed Central

Street, Sally E.; Whalen, Andrew; Laland, Kevin N.

2016-01-01

In birds and primates, the frequency of behavioural innovation has been shown to covary with absolute and relative brain size, leading to the suggestion that large brains allow animals to innovate, and/or that selection for innovativeness, together with social learning, may have driven brain enlargement. We examined the relationship between primate brain size and both technical (i.e. tool using) and non-technical innovation, deploying a combination of phylogenetically informed regression and exploratory causal graph analyses. Regression analyses revealed that absolute and relative brain size correlated positively with technical innovation, and exhibited consistently weaker, but still positive, relationships with non-technical innovation. These findings mirror similar results in birds. Our exploratory causal graph analyses suggested that technical innovation shares strong direct relationships with brain size, body size, social learning rate and social group size, whereas non-technical innovation did not exhibit a direct relationship with brain size. Nonetheless, non-technical innovation was linked to brain size indirectly via diet and life-history variables. Our findings support ‘technical intelligence’ hypotheses in linking technical innovation to encephalization in the restricted set of primate lineages where technical innovation has been reported. Our findings also provide support for a broad co-evolving complex of brain, behaviour, life-history, social and dietary variables, providing secondary support for social and ecological intelligence hypotheses. The ability to gain access to difficult-to-extract, but potentially nutrient-rich, resources through tool use may have conferred on some primates adaptive advantages, leading to selection for brain circuitry that underlies technical proficiency. PMID:26926276

The coevolution of innovation and technical intelligence in primates.

PubMed

Navarrete, Ana F; Reader, Simon M; Street, Sally E; Whalen, Andrew; Laland, Kevin N

2016-03-19

In birds and primates, the frequency of behavioural innovation has been shown to covary with absolute and relative brain size, leading to the suggestion that large brains allow animals to innovate, and/or that selection for innovativeness, together with social learning, may have driven brain enlargement. We examined the relationship between primate brain size and both technical (i.e. tool using) and non-technical innovation, deploying a combination of phylogenetically informed regression and exploratory causal graph analyses. Regression analyses revealed that absolute and relative brain size correlated positively with technical innovation, and exhibited consistently weaker, but still positive, relationships with non-technical innovation. These findings mirror similar results in birds. Our exploratory causal graph analyses suggested that technical innovation shares strong direct relationships with brain size, body size, social learning rate and social group size, whereas non-technical innovation did not exhibit a direct relationship with brain size. Nonetheless, non-technical innovation was linked to brain size indirectly via diet and life-history variables. Our findings support 'technical intelligence' hypotheses in linking technical innovation to encephalization in the restricted set of primate lineages where technical innovation has been reported. Our findings also provide support for a broad co-evolving complex of brain, behaviour, life-history, social and dietary variables, providing secondary support for social and ecological intelligence hypotheses. The ability to gain access to difficult-to-extract, but potentially nutrient-rich, resources through tool use may have conferred on some primates adaptive advantages, leading to selection for brain circuitry that underlies technical proficiency. © 2016 The Author(s).

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 6 2012-01-01 2012-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 6 2014-01-01 2014-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 6 2011-01-01 2011-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 6 2013-01-01 2013-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

Technical support for Life Sciences communities on a production grid infrastructure.

PubMed

Michel, Franck; Montagnat, Johan; Glatard, Tristan

2012-01-01

Production operation of large distributed computing infrastructures (DCI) still requires a lot of human intervention to reach acceptable quality of service. This may be achievable for scientific communities with solid IT support, but it remains a show-stopper for others. Some application execution environments are used to hide runtime technical issues from end users. But they mostly aim at fault-tolerance rather than incident resolution, and their operation still requires substantial manpower. A longer-term support activity is thus needed to ensure sustained quality of service for Virtual Organisations (VO). This paper describes how the biomed VO has addressed this challenge by setting up a technical support team. Its organisation, tooling, daily tasks, and procedures are described. Results are shown in terms of resource usage by end users, amount of reported incidents, and developed software tools. Based on our experience, we suggest ways to measure the impact of the technical support, perspectives to decrease its human cost and make it more community-specific.

32 CFR 203.10 - Eligible activities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... with technical reports that summarize data and support cleanup decisions. Technical assistance may be provided to review plans and interpret technical reports for community members of RABs and TRCs. These...) MISCELLANEOUS TECHNICAL ASSISTANCE FOR PUBLIC PARTICIPATION (TAPP) IN DEFENSE ENVIRONMENTAL RESTORATION...

32 CFR 203.10 - Eligible activities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... with technical reports that summarize data and support cleanup decisions. Technical assistance may be provided to review plans and interpret technical reports for community members of RABs and TRCs. These...) MISCELLANEOUS TECHNICAL ASSISTANCE FOR PUBLIC PARTICIPATION (TAPP) IN DEFENSE ENVIRONMENTAL RESTORATION...

32 CFR 203.10 - Eligible activities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... with technical reports that summarize data and support cleanup decisions. Technical assistance may be provided to review plans and interpret technical reports for community members of RABs and TRCs. These...) MISCELLANEOUS TECHNICAL ASSISTANCE FOR PUBLIC PARTICIPATION (TAPP) IN DEFENSE ENVIRONMENTAL RESTORATION...

Engineering Technical Support Center, Innovative Science and Technical Support for Cost-Effective Cleanups: Five Year Summary Report for 2007-2012

EPA Science Inventory

This report summarizes a variety of significant projects that ETSC and its colleagues in the Land Remediation and Pollution Control Division (LRPCD) have supported during the last five years. Projects have addressed an array of environmental scenarios, including remote mining co...

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study

PubMed Central

2012-01-01

Background The introduction of a new method of transmitting prescriptions from general practices to community pharmacies in England (Electronic Prescription Service Release 2 (EPS2)) has generated debate on how it will change work practice. As EPS2 will be a key technical element in dispensing, we reviewed the literature to find that there were no studies on how social and technical elements come together to form work practice in community pharmacies. This means the debate has little point of reference. Our aim therefore was to study the ways social and technical elements of a community pharmacy are used to achieve dispensing through the development of a conceptual model on pharmacy work practice, and to consider how a core technical element such the EPS2 could change work practice. Method We used ethnographic methods inclusive of case-study observations and interviews to collect qualitative data from 15 community pharmacies that were in the process of adopting or were soon to adopt EPS2. We analysed the case studies thematically and used rigorous multi-dimensional and multi-disciplinary interpretive validation techniques to cross analyse findings. Results In practice, dispensing procedures were not designed to take into account variations in human and technical integration, and assumed that repetitive and collective use of socio-technical elements were at a constant. Variables such as availability of social and technical resources, and technical know-how of staff were not taken into account in formalised procedures. Yet community pharmacies were found to adapt their dispensing in relation to the balance of social and technical elements available, and how much of the social and technical elements they were willing to integrate into dispensing. While some integrated as few technical elements as possible, some depended entirely on technical artefacts. This pattern also applied to the social elements of dispensing. Through the conceptual model development process, we identified three approaches community pharmacies used to appropriate procedures in practice. These were ‘technically oriented’, ‘improvising’ or ‘socially oriented’. Conclusion We offer a model of different work approaches community pharmacies use to dispense, which suggests that when adopting a core technical element such as the EPS2 system of dispensing there could be variations in its successful adoption. Technically oriented pharmacies might find it easiest to integrate a similar artefact into work practice although needs EPS2 to synchronise effectively with existing technologies. Pharmacies adopting an improvising-approach have the potential to improve how they organise dispensing through EPS2 although they will need to improve how they apply their operating procedures. Socially oriented pharmacies will need to dramatically adapt their approach to dispensing since they usually rely on few technical tools. PMID:23256484

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study.

PubMed

Harvey, Jasmine; Avery, Anthony J; Waring, Justin; Barber, Nick

2012-12-20

The introduction of a new method of transmitting prescriptions from general practices to community pharmacies in England (Electronic Prescription Service Release 2 (EPS2)) has generated debate on how it will change work practice. As EPS2 will be a key technical element in dispensing, we reviewed the literature to find that there were no studies on how social and technical elements come together to form work practice in community pharmacies. This means the debate has little point of reference. Our aim therefore was to study the ways social and technical elements of a community pharmacy are used to achieve dispensing through the development of a conceptual model on pharmacy work practice, and to consider how a core technical element such the EPS2 could change work practice. We used ethnographic methods inclusive of case-study observations and interviews to collect qualitative data from 15 community pharmacies that were in the process of adopting or were soon to adopt EPS2. We analysed the case studies thematically and used rigorous multi-dimensional and multi-disciplinary interpretive validation techniques to cross analyse findings. In practice, dispensing procedures were not designed to take into account variations in human and technical integration, and assumed that repetitive and collective use of socio-technical elements were at a constant. Variables such as availability of social and technical resources, and technical know-how of staff were not taken into account in formalised procedures. Yet community pharmacies were found to adapt their dispensing in relation to the balance of social and technical elements available, and how much of the social and technical elements they were willing to integrate into dispensing. While some integrated as few technical elements as possible, some depended entirely on technical artefacts. This pattern also applied to the social elements of dispensing. Through the conceptual model development process, we identified three approaches community pharmacies used to appropriate procedures in practice. These were 'technically oriented', 'improvising' or 'socially oriented'. We offer a model of different work approaches community pharmacies use to dispense, which suggests that when adopting a core technical element such as the EPS2 system of dispensing there could be variations in its successful adoption. Technically oriented pharmacies might find it easiest to integrate a similar artefact into work practice although needs EPS2 to synchronise effectively with existing technologies. Pharmacies adopting an improvising-approach have the potential to improve how they organise dispensing through EPS2 although they will need to improve how they apply their operating procedures. Socially oriented pharmacies will need to dramatically adapt their approach to dispensing since they usually rely on few technical tools.

Identifying knowledge activism in worker health and safety representation: A cluster analysis.

PubMed

Hall, Alan; Oudyk, John; King, Andrew; Naqvi, Syed; Lewchuk, Wayne

2016-01-01

Although worker representation in OHS has been widely recognized as contributing to health and safety improvements at work, few studies have examined the role that worker representatives play in this process. Using a large quantitative sample, this paper seeks to confirm findings from an earlier exploratory qualitative study that worker representatives can be differentiated by the knowledge intensive tactics and strategies that they use to achieve changes in their workplace. Just under 900 worker health and safety representatives in Ontario completed surveys which asked them to report on the amount of time they devoted to different types of representation activities (i.e., technical activities such as inspections and report writing vs. political activities such as mobilizing workers to build support), the kinds of conditions or hazards they tried to address through their representation (e.g., housekeeping vs. modifications in ventilation systems), and their reported success in making positive improvements. A cluster analysis was used to determine whether the worker representatives could be distinguished in terms of the relative time devoted to different activities and the clusters were then compared with reference to types of intervention efforts and outcomes. The cluster analysis identified three distinct groupings of representatives with significant differences in reported types of interventions and in their level of reported impact. Two of the clusters were consistent with the findings in the exploratory study, identified as knowledge activism for greater emphasis on knowledge based political activity and technical-legal representation for greater emphasis on formalized technical oriented procedures and legal regulations. Knowledge activists were more likely to take on challenging interventions and they reported more impact across the full range of interventions. This paper provides further support for the concepts of knowledge activism and technical-legal representation when differentiating the strategic orientations and impact of worker health and safety representatives, with important implications for education, political support and recruitment. © 2015 Wiley Periodicals, Inc.

[A network to promote health systems based on primary health care in the Region of the Americas].

PubMed

Herrera Vázquez, María Magdalena; Rodríguez Avila, Nuria; Nebot Adell, Carme; Montenegro, Hernán

2007-05-01

To identify the relational components of an international network of organizations that provide technical and financial assistance to promote the development of health systems based on primary health care in the countries of the Region of the Americas; to analyze the linkages that would allow the collaborating partners of the Pan American Health Organization (PAHO) to work together on health issues; and to determine the basic theoretical elements that can help to develop action strategies that support advocacy efforts by a network. This was a qualitative and quantitative cross-sectional study based on identifying key informants and on analyzing social networks. Ethnographic and relational information from 46 international organizations was collected through a self-administered semistructured questionnaire. From 46 international health cooperation organizations, 29 decision makers from 29 organizations participated (63.0% response rate). The structure and the strength of the network was evaluated in terms of density, closeness, clustering, and centralization. The statistical analysis was done using computer programs that included UCINET, Pajek, and Microsoft Access. We found a structurally centralized theoretical network, whose nodes were clustered into four central subgroups linked by a shared vision. The leadership, influence, and political interests reflected the formal and technical-cooperation linkages, the formal support for health systems based on primary health care, and the flow of resources being more often technical ones than financial ones. The interorganizational relational components and the social-action ties that were identified could help in the development and consolidation of a thematic network for advocacy and for the management of technical and financial assistance that supports primary health care in the Americas. The linkages for joint action that were identified could advance international cooperation in developing health systems based on primary health care, once PAHO formulates clear implementation strategies and takes a leadership position in mobilizing financial resources and in creating informal and interpersonal linkages for action.

USAF/SCEEE Graduate Student Summer Support Program (1982). Management and Technical Report.

DTIC Science & Technology

1982-10-01

AD-A130 767 USAF/SCEEE GRADUATE STUDENT SUMMER SUPPORT PROGRAM (1982) MANAGEMENT AND..(U) SOUTHEASTERN CENTER FORELECTRICAL ENGINEERING EDUCATION INC...SUMMER SUPPORT PROGRAM Conducted by Southeastern Center for Electrical Engineering Education under USAF Contract Number F49620-82-C-0035 MANAGEMENT ...UNITED STATES AIR FORCE GRADUATE STUDENT SL24MER SUPPORT PROGRAM 1982 PROGRAM MANAGEMENT AND TECHNICAL REPORT SOUTHEASTERN CENTER FOR ELECTRICAL

End-user support for primary care electronic medical records: a qualitative case study of users’ needs, expectations and realities

PubMed Central

Shachak, Aviv; Montgomery, Catherine; Dow, Rustam; Barnsley, Jan; Tu, Karen; Jadad, Alejandro R.; Lemieux-Charles, Louise

2015-01-01

Support is considered an important factor for realizing the benefits of health information technology (HIT) but there is a dearth of research on the topic of support, especially in primary care. We conducted a qualitative multiple case study of 4 family health teams (FHTs) and one family health organization (FHO) in Ontario, Canada in an attempt to gain insight into users’ expectations and needs, and the realities of end-user support for primary care electronic medical records (EMRs). Data were collected by semi-structured interviews, documents review, and observation of training sessions. The analysis highlights the important role of on-site information technology (IT) staff and super-users in liaising with various stakeholders to solve technical problems and providing hardware and functional (‘how to’) support; the local development of data support practices to ensure consistent documentation; and the gaps that exist in users’ and support personnel’s understanding of each other’s work processes. PMID:26225209

Two-probe STM experiments at the atomic level.

PubMed

Kolmer, Marek; Olszowski, Piotr; Zuzak, Rafal; Godlewski, Szymon; Joachim, Christian; Szymonski, Marek

2017-11-08

Direct characterization of planar atomic or molecular scale devices and circuits on a supporting surface by multi-probe measurements requires unprecedented stability of single atom contacts and manipulation of scanning probes over large, nanometer scale area with atomic precision. In this work, we describe the full methodology behind atomically defined two-probe scanning tunneling microscopy (STM) experiments performed on a model system: dangling bond dimer wire supported on a hydrogenated germanium (0 0 1) surface. We show that 70 nm long atomic wire can be simultaneously approached by two independent STM scanners with exact probe to probe distance reaching down to 30 nm. This allows direct wire characterization by two-probe I-V characteristics at distances below 50 nm. Our technical results presented in this work open a new area for multi-probe research, which can be now performed with precision so far accessible only by single-probe scanning probe microscopy (SPM) experiments.

Making work safer: testing a model of social exchange and safety management.

PubMed

DeJoy, David M; Della, Lindsay J; Vandenberg, Robert J; Wilson, Mark G

2010-04-01

This study tests a conceptual model that focuses on social exchange in the context of safety management. The model hypothesizes that supportive safety policies and programs should impact both safety climate and organizational commitment. Further, perceived organizational support is predicted to partially mediate both of these relationships. Study outcomes included traditional outcomes for both organizational commitment (e.g., withdrawal behaviors) as well as safety climate (e.g., self-reported work accidents). Questionnaire responses were obtained from 1,723 employees of a large national retailer. Using structural equation modeling (SEM) techniques, all of the model's hypothesized relationships were statistically significant and in the expected directions. The results are discussed in terms of social exchange in organizations and research on safety climate. Maximizing safety is a social-technical enterprise. Expectations related to social exchange and reciprocity figure prominently in creating a positive climate for safety within the organization. Copyright 2010 Elsevier Ltd. All rights reserved.

Evaluation of a participatory ergonomic intervention process in kitchen work.

PubMed

Pehkonen, Irmeli; Takala, Esa-Pekka; Ketola, Ritva; Viikari-Juntura, Eira; Leino-Arjas, Päivi; Hopsu, Leila; Virtanen, Tuija; Haukka, Eija; Holtari-Leino, Merja; Nykyri, Elina; Riihimäki, Hilkka

2009-01-01

We evaluated a participatory ergonomic intervention process applied in 59 municipal kitchens. In groups of three to five kitchens, the workers participated in eight workshops, and generated and evaluated solutions to optimize musculoskeletal load in their work. An ergonomist initiated and supported the process. By the end, 402 changes were implemented. Evaluative data were collected using research diaries, questionnaires, and focus group interviews. The intervention model proved feasible and the participatory approach was mostly experienced as motivating. The workers' knowledge and awareness of ergonomics increased, which improved their ability to tackle ergonomic problems by themselves. The changes in ergonomics were perceived to decrease physical load and improve musculoskeletal health. As hindering factors for implementation, lack of time and motivation, and insufficient financial resources were mentioned. In addition, the workers expressed a wish for more support from the management, technical staff, and ergonomists.

Site characterization progress report: Yucca Mountain, Nevada, October 1, 1994--March 31, 1995, Number 12. Nuclear Waste Policy Act (Section 113)

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-08-01

During the first half of fiscal year 1995, most activities at the Yucca Mountain Site Characterization Project were directed at implementing the Program Plan developed by the Office of Civilian Radioactive Waste Management. The Plan is designed to enable the Office to make measurable and significant progress toward key objectives over the next five years within the financial resources that can be realistically expected. Activities this period focused on the immediate goal of determining by 1998 whether Yucca Mountain, Nevada, is technically suitable as a possible site for a geologic repository for the permanent disposal of spent nuclear fuel andmore » high-level radioactive waste. Work on the Project advanced in several critical areas, including programmatic activities such as issuing the Program Plan, completing the first technical basis report to support the assessment of three 10 CFR 960 guidelines, developing the Notice of Intent for the Environmental Impact Statement, submitting the License Application Annotated Outline, and beginning a rebaselining effort to conform with the goals of the Program Plan. Scientific investigation and analysis of the site and design and construction activities to support the evaluation of the technical suitability of the site also advanced. Specific details relating to all Project activities and reports generated are presented in this report.« less

Continuing professional development: researching non-technical competencies can support cognitive reappraisal and reduced stress in clinicians.

PubMed

Kinnison, Tierney; May, Stephen

2017-09-09

Generic professional capabilities (non-technical competencies) are increasingly valued for their links to patient outcomes and clinician well-being. This study explores the emotional change, and practice-related outcomes, of participants of a veterinary professional key skills (PKS) continuing professional development (CPD) module. Reflective summaries produced by participants were analysed. A change in emotion, from 'negative' to 'positive', was the focus of analysis. Sections regarding these emotions were thematically analysed. Analysis was performed on 46 summaries. Three themes were identified: 'the PKS module' (centred on reluctance becoming surprise and stimulation), 'developing non-technical competencies' (unease to confidence) and 'stress and coping through a reflective focus' (anxiety to harmony). The changing emotions were connected to positive cognitive reappraisal and often behaviour changes, benefitting self, practice, clients and patients. The PKS module teaches participants to reflect; a new and challenging concept. The consequences of this enabled participants to understand the importance of professional topics, to be appreciative as well as critical, and to enjoy their job. Importantly, the module stimulated coping responses. Better understanding of roles led to participants having more reasonable expectations of themselves, more appreciation of their work and reduced stress. This research supports more attention to professional skills CPD for health professions. © British Veterinary Association (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Risk-Informed Decision Making: Application to Technology Development Alternative Selection

NASA Technical Reports Server (NTRS)

Dezfuli, Homayoon; Maggio, Gaspare; Everett, Christopher

2010-01-01

NASA NPR 8000.4A, Agency Risk Management Procedural Requirements, defines risk management in terms of two complementary processes: Risk-informed Decision Making (RIDM) and Continuous Risk Management (CRM). The RIDM process is used to inform decision making by emphasizing proper use of risk analysis to make decisions that impact all mission execution domains (e.g., safety, technical, cost, and schedule) for program/projects and mission support organizations. The RIDM process supports the selection of an alternative prior to program commitment. The CRM process is used to manage risk associated with the implementation of the selected alternative. The two processes work together to foster proactive risk management at NASA. The Office of Safety and Mission Assurance at NASA Headquarters has developed a technical handbook to provide guidance for implementing the RIDM process in the context of NASA risk management and systems engineering. This paper summarizes the key concepts and procedures of the RIDM process as presented in the handbook, and also illustrates how the RIDM process can be applied to the selection of technology investments as NASA's new technology development programs are initiated.

The US DOE-EM International Program - 13004

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elmetti, Rosa R.; Han, Ana M.; Williams, Alice C.

2013-07-01

The U.S. Department of Energy (DOE) Office of Environmental Management (EM) conducts international collaboration activities in support of U.S. policies and objectives regarding the accelerated risk reduction and remediation of environmental legacy of the nations' nuclear weapons program and government sponsored nuclear energy research. The EM International Program supported out of the EM Office of the Associate Principal Deputy Assistant Secretary pursues collaborations with foreign government organizations, educational institutions and private industry to assist in identifying technologies and promote international collaborations that leverage resources and link international experience and expertise. In fiscal year (FY) 2012, the International Program awarded eightmore » international collaborative projects for work scope spanning waste processing, groundwater and soil remediation, deactivation and decommissioning (D and D) and nuclear materials disposition initiatives to seven foreign organizations. Additionally, the International Program's scope and collaboration opportunities were expanded to include technical as well as non-technical areas. This paper will present an overview of the on-going tasks awarded in FY 2012 and an update of upcoming international activities and opportunities for expansion into FY 2013 and beyond. (authors)« less

The US DOE EM international program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elmetti, Rosa R.; Han, Ana M.; Roach, Jay A.

2013-07-01

The U.S. Department of Energy (DOE) Office of Environmental Management (EM) conducts international collaboration activities in support of U.S. policies and objectives regarding the accelerated risk reduction and remediation of environmental legacy of the nations' nuclear weapons program and government sponsored nuclear energy research. The EM International Program supported out of the EM Office of the Associate Principal Deputy Assistant Secretary pursues collaborations with foreign government organizations, educational institutions and private industry to assist in identifying technologies and promote international collaborations that leverage resources and link international experience and expertise. In fiscal year (FY) 2012, the International Program awarded eightmore » international collaborative projects for work scope spanning waste processing, groundwater and soil remediation, deactivation and decommissioning (D and D) and nuclear materials disposition initiatives to seven foreign organizations. Additionally, the International Program's scope and collaboration opportunities were expanded to include technical as well as non-technical areas. This paper will present an overview of the on-going tasks awarded in FY 2012 and an update of upcoming international activities and opportunities for expansion into the remainder of FY 2013 and beyond. (authors)« less

Two Paths from the Same Place: Task Driven and Human Centered Evolution of a Group Information Surface

NASA Technical Reports Server (NTRS)

Russell, Daniel M.; Trimble, Jay; Wales, Roxana; Clancy, Daniel (Technical Monitor)

2003-01-01

This is the tale of two different implementations of a collaborative information tool, that started from the same design source. The Blueboard, developed at IBM Research, is a tool for groups to use in exchanging information in a lightweight, informal collaborative way. It began as a large display surface for walk-by use in a corporate setting and has evolved in response to task demands and user needs. At NASA, the MERBoard is being designed to support surface operations for the upcoming Mars Exploration Rover Missions. The MERBoard is a tool that was inspired by the Blueboard design, extending this design to support the collaboration requirements for viewing, annotating, linking and distributing information for the science and engineering teams that will operate two rovers on the surface of Mars. The ways in which each group transformed the system reflects not only technical requirements, but also the needs of users in each setting and embedding of the system within the larger socio-technical environment. Lessons about how task requirements, information flow requirements and work practice drive the evolution of a system are illustrated.

Applied Physics Education: PER focused on Physics-Intensive Careers

NASA Astrophysics Data System (ADS)

Zwickl, Benjamin

2017-01-01

Physics education research is moving beyond classroom learning to study the application of physics education within STEM jobs and PhD-level research. Workforce-related PER is vital to supporting physics departments as they educate students for a diverse range of careers. Results from an on-going study involving interviews with entry-level employees, academic researchers, and supervisors in STEM jobs describe the ways that mathematics, physics, and communication are needed for workplace success. Math and physics are often used for solving ill-structured problems that involve data analysis, computational modeling, or hands-on work. Communication and collaboration are utilized in leadership, sales, and as way to transfer information capital throughout the organization through documentation, emails, memos, and face-to-face discussions. While managers and advisors think a physics degree typically establishes technical competency, communication skills are vetted through interviews and developed on the job. Significant learning continues after graduation, showing the importance of cultivating self-directed learning habits and the critical role of employers as educators of specialized technical abilities through on-the-job training. Supported by NSF DGE-1432578.

Oak Ridge National Laboratory Annual Progress Report for the Power Electronics and Electric Machinery Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olszewski, M.

The U.S. Department of Energy (DOE) and the U.S. Council for Automotive Research (composed of automakers Ford, General Motors, and DaimlerChrysler) announced in January 2002 a new cooperative research effort. Known as FreedomCAR (derived from 'Freedom' and 'Cooperative Automotive Research'), it represents DOE's commitment to developing public/private partnerships to fund high-risk, high-payoff research into advanced automotive technologies. Efficient fuel cell technology, which uses hydrogen to power automobiles without air pollution, is a very promising pathway to achieve the ultimate vision. The new partnership replaces and builds upon the Partnership for a New Generation of Vehicles initiative that ran from 1993more » through 2001. The Vehicle Systems subprogram within the FreedomCAR and Vehicle Technologies Program provides support and guidance for many cutting-edge automotive and heavy truck technologies now under development. Research is focused on understanding and improving the way the various new components of tomorrow's automobiles and heavy trucks will function as a unified system to improve fuel efficiency. This work also supports the development of advanced automotive accessories and the reduction of parasitic losses (e.g., aerodynamic drag, thermal management, friction and wear, and rolling resistance). In supporting the development of hybrid propulsion systems, the Vehicle Systems subprogram has enabled the development of technologies that will significantly improve fuel economy, comply with projected emissions and safety regulations, and use fuels produced domestically. The Vehicle Systems subprogram supports the efforts of the FreedomCAR and Fuel Partnership and the 21st Century Truck Partnership through a three-phase approach intended to: (1) Identify overall propulsion and vehicle-related needs by analyzing programmatic goals and reviewing industry's recommendations and requirements and then develop the appropriate technical targets for systems, subsystems, and component research and development activities; (2) Develop and validate individual subsystems and components, including electric motors, emission control devices, battery systems, power electronics, accessories, and devices to reduce parasitic losses; and (3) Determine how well the components and subsystems work together in a vehicle environment or as a complete propulsion system and whether the efficiency and performance targets at the vehicle level have been achieved. The research performed under the Vehicle Systems subprogram will help remove technical and cost barriers to enable the development of technology for use in such advanced vehicles as hybrid and fuel-cell-powered automobiles that meet the goals of the FreedomCAR Program. A key element in making hybrid electric vehicles practical is providing an affordable electric traction drive system. This will require attaining weight, volume, and cost targets for the power electronics and electrical machines subsystems of the traction drive system. Areas of development include these: (1) Novel traction motor designs that result in increased power density and lower cost; (2) Inverter technologies involving new topologies to achieve higher efficiency and the ability to accommodate higher-temperature environments; (3) Converter concepts that employ means of reducing the component count and integrating functionality to decrease size, weight, and cost; (4) More effective thermal control and packaging technologies; and (5) Integrated motor/inverter concepts. The Oak Ridge National Laboratory's (ORNL's) Power Electronics and Electric Machinery Research Center conducts fundamental research, evaluates hardware, and assists in the technical direction of the DOE Office of FreedomCAR and Vehicle Technologies Program, Power Electronics and Electric Machinery Program. In this role, ORNL serves on the FreedomCAR Electrical and Electronics Technical Team, evaluates proposals for DOE, and lends its technological expertise to the direction of projects and evaluation of developing technologies. ORNL also executes specific projects for DOE. The following report discusses those projects carried out in FY 2006 and conveys highlights of their accomplishments. Numerous project reviews, technical reports, and papers have been published for these efforts, if the reader is interested in pursuing details of the work. Summaries of major accomplishments for each technical project are give.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burton, J. C.; Environmental Research

The Commodity Credit Corporation (CCC) of the U.S. Department of Agriculture (USDA) has entered into an interagency agreement with the U.S. Department of Energy (DOE) under which Argonne National Laboratory provides technical assistance for hazardous waste site characterization and remediation for the CCC/USDA. Carbon tetrachloride is the contaminant of primary concern at sites in Kansas where former CCC/USDA grain storage facilities were located. Argonne applies its QuickSite(reg sign) Expedited Site Characterization (ESC) approach to these former facilities. The QuickSite environmental site characterization methodology is Argonne's proprietary implementation of the ESC process (ASTM 1998). Argonne has used this approach at severalmore » former CCC/USDA facilities in Kansas, including Agenda, Agra, Everest, and Frankfort. The Argonne ESC approach revolves around a multidisciplinary, team-oriented approach to problem solving. The basic features and steps of the QuickSite methodology are as follows: (1) A team of scientists with diverse expertise and strong field experience is required to make the process work. The Argonne team is composed of geologists, geochemists, geophysicists, hydrogeologists, chemists, biologists, engineers, computer scientists, health and safety personnel, and regulatory staff, as well as technical support staff. Most of the staff scientists are at the Ph.D. level; each has on average, more than 15 years of experience. The technical team works together throughout the process. In other words, the team that plans the program also implements the program in the field and writes the reports. More experienced scientists do not remain in the office while individuals with lesser degrees or experience carry out the field work. (2) The technical team reviews, evaluates, and interprets existing data for the site and the contaminants there to determine which data sets are technically valid and can be used in initially designing the field program. A basic mistake sometimes made in the site characterization process is failure to use technically sound available data to form working hypotheses on hydrogeology, contaminant distribution, etc. for initial testing. (3) After assembling and interpreting existing data for the site, the entire technical team visits the site to identify as a group the site characteristics that might prohibit or enhance any particular technological approach. Logistic and community constraints are also identified at this point. (4) After the field visit, the team selects a suite of technologies appropriate to the problem and completes the design of the field program. No one technique works well at all sites, and a suite of techniques is necessary to delineate site features fully. In addition, multiple technologies are employed to increase confidence in conclusions about site features. Noninvasive and minimally invasive technologies are emphasized to minimize risk to the environment, the community, and the staff. In no case is the traditional approach of installing a massive number of monitoring wells followed. A dynamic work plan that outlines the program is produced for the sponsoring and regulatory agencies. The word ''dynamic'' is emphasized because the work plan is viewed as a guide, subject to modification, for the site characterization activity, rather than a document that is absolute and unchangeable. Therefore, the health and safety plan and the quality assurance/quality control plan must be broad and encompass all possible alterations to the plan. The cooperation of the regulating agency is essential in successful implementation of this process. The sponsoring and regulatory agencies are notified if significant changes to the site-specific work plan are necessary. (5) The entire team participates in the technical field program. Several technical activities are undertaken simultaneously. These may range from different surface geophysics investigations to vegetation sampling. Data from the various activities are reduced and interpreted each day by the technical staff. Various computer programs are used to visualize and integrate the data. However, people do the data interpretation and integration, not the computers, which are just one more tool at the site. At the end of the day, the staff members meet, review results, and modify the next day's program as necessary to optimize activities that are generating overlapping or confirming site details. Data are not arbitrarily discarded -- each finding must be explained and understood. Anomalous readings may be due to equipment malfunctions, laboratory error, or the inability of a technique to work in a given setting. The suite of selected technologies is adjusted in the field if necessary. (6) The end result of this process is the optimization of the field activity to produce a high-quality technical product that is cost and time effective.« less

Chairmanship of the Neptune/Pluto outer planets science working group

NASA Astrophysics Data System (ADS)

Stern, S. Alan

1993-11-01

The Outer Planets Science Working Group (OPSWG) is the NASA Solar System Exploration Division (SSED) scientific steering committee for the Outer Solar System missions. OPSWG consists of 19 members and is chaired by Dr. S. Alan Stern. This proposal summarizes the FY93 activities of OPSWG, describes a set of objectives for OPSWG in FY94, and outlines the SWG's activities for FY95. As chair of OPSWG, Dr. Stern will be responsible for: organizing priorities, setting agendas, conducting meetings of the Outer Planets SWG; reporting the results of OPSWG's work to SSED; supporting those activities relating to OPSWG work, such as briefings to the SSES, COMPLEX, and OSS; supporting the JPL/SAIC Pluto study team; and other tasks requested by SSED. As the Scientific Working Group (SWG) for Jupiter and the planets beyond, OPSWG is the SSED SWG chartered to study and develop mission plans for all missions to the giant planets, Pluto, and other distant objects in the remote outer solar system. In that role, OPSWG is responsible for: defining and prioritizing scientific objectives for missions to these bodies; defining and documenting the scientific goals and rationale behind such missions; defining and prioritizing the datasets to be obtained in these missions; defining and prioritizing measurement objectives for these missions; defining and documenting the scientific rationale for strawman instrument payloads; defining and prioritizing the scientific requirements for orbital tour and flyby encounter trajectories; defining cruise science opportunities plan; providing technical feedback to JPL and SSED on the scientific capabilities of engineering studies for these missions; providing documentation to SSED concerning the scientific goals, objectives, and rationale for the mission; interfacing with other SSED and OSS committees at the request of SSED's Director or those committee chairs; providing input to SSED concerning the structure and content of the Announcement of Opportunity for payload and scientific team selection for such missions; and providing other technical or programmatic inputs concerning outer solar system missions at the request of the Director of SSED.

Chairmanship of the Neptune/Pluto outer planets science working group

NASA Technical Reports Server (NTRS)

Stern, S. Alan

1993-01-01

The Outer Planets Science Working Group (OPSWG) is the NASA Solar System Exploration Division (SSED) scientific steering committee for the Outer Solar System missions. OPSWG consists of 19 members and is chaired by Dr. S. Alan Stern. This proposal summarizes the FY93 activities of OPSWG, describes a set of objectives for OPSWG in FY94, and outlines the SWG's activities for FY95. As chair of OPSWG, Dr. Stern will be responsible for: organizing priorities, setting agendas, conducting meetings of the Outer Planets SWG; reporting the results of OPSWG's work to SSED; supporting those activities relating to OPSWG work, such as briefings to the SSES, COMPLEX, and OSS; supporting the JPL/SAIC Pluto study team; and other tasks requested by SSED. As the Scientific Working Group (SWG) for Jupiter and the planets beyond, OPSWG is the SSED SWG chartered to study and develop mission plans for all missions to the giant planets, Pluto, and other distant objects in the remote outer solar system. In that role, OPSWG is responsible for: defining and prioritizing scientific objectives for missions to these bodies; defining and documenting the scientific goals and rationale behind such missions; defining and prioritizing the datasets to be obtained in these missions; defining and prioritizing measurement objectives for these missions; defining and documenting the scientific rationale for strawman instrument payloads; defining and prioritizing the scientific requirements for orbital tour and flyby encounter trajectories; defining cruise science opportunities plan; providing technical feedback to JPL and SSED on the scientific capabilities of engineering studies for these missions; providing documentation to SSED concerning the scientific goals, objectives, and rationale for the mission; interfacing with other SSED and OSS committees at the request of SSED's Director or those committee chairs; providing input to SSED concerning the structure and content of the Announcement of Opportunity for payload and scientific team selection for such missions; and providing other technical or programmatic inputs concerning outer solar system missions at the request of the Director of SSED.

Technical Support Project for Cleaning Up Contaminated Sites - Expertise Directory

EPA Pesticide Factsheets

This directory is searchable and provides a snapshot of the various types of expertise possessed by the current members of the three Technical Support Project forums. It is based on input provided by the members themselves.

76 FR 68429 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-04

... documentation, U.S. Government and contractor engineering, technical, and logistics personnel support services, and other related elements of logistics support. (iv) Military Department: Navy (USMC) (SDH). (v.... Government and contractor engineering, technical, and logistics personnel [[Page 68432